Science.gov

Sample records for development project lead

  1. DEVELOPING AND IMPLEMENTING A LEAD DUST MONITORING, OUTREACH AND EDUCATION PROGRAM IN YOUR COMMUNITY/SYRACUSE LEAD DUST PROJECT

    EPA Science Inventory

    EPA has developed a technology transfer document (case-study) for the EMPACT Syracuse Lead Dust Project. The Lead Dust Project is designed to measure the lead dust content in homes and public buildings within the City of Syracuse, NY. The project also contains an educational comp...

  2. 94-1 Research and Development Project lead laboratory support: Fiscal year 1997. Progress report

    SciTech Connect

    McKee, S.D.

    1996-12-01

    On May 26, 1994, the Defense Nuclear Facilities Safety Board (DNFSB) issued Recommendation 94-1, which expressed the board`s concern about nuclear materials left in the manufacturing pipeline after the US halted its nuclear weapons production activities. The DNFSB emphasized the need for remediation of these materials. As part of Recommendation 94-1, the DNFSB defined research objectives as follows: that a research program be established to fill any gaps in the information base needed for choosing among the alternate processes to be used in safe conversion of various types of fissile materials to optimal forms for safe interim storage and the longer-term disposition. To achieve this objective a research and technology development program with two elements is needed: a technology-specific program that is focused on treating and storing materials safety, with concomitant development of storage criteria and surveillance requirements, centered around 3- and 8-year targets; and a core technology program to augment the knowledge base about general chemical and physical processing and storage behavior and to assure safe interim material storage until disposition policies are formulated. The paper reports the progress on the following: materials identification and surveillance; stabilization process development; surveillance and monitoring; core technologies; and project management.

  3. 94-1 Research and development project lead laboratory support. Status report, January 1--March 31, 1996

    SciTech Connect

    Dinehart, M.

    1996-09-01

    This document reports status and technical progress for Los Alamos National Laboratories 94-1 Research and Development projects. An introduction to the project structure and an executive summary are included. Projects described include Electrolytic Decontamination, Combustibles, Detox, Sand, Slag, and Crucible, Surveillance, and Core Technology.

  4. Does Education Plus Action Lead to Leadership on Climate? Preliminary Results from the ACE Leadership Development Longitudinal Survey Project

    NASA Astrophysics Data System (ADS)

    Anderson, R. K.; Qusba, L.; Lappe, M.; Flora, J. A.

    2014-12-01

    Through education and leadership development, Alliance for Climate Education (ACE) is building a generation of confident and capable youth driving climate solutions now throughout their lives. In 2011-12, a random sample of 2,800 high school students across the country was surveyed before and after seeing the ACE Assembly on climate science and solutions. The survey showed that the ACE Assembly resulted in a 27% increase in climate science knowledge scores, with 59% of students increasing their intentions to take action on climate and a doubling of the number of students talking to parents and peers about climate change. Students were also compared to the Global Warming's Six Americas classification of Americans' views on climate. Following the ACE Assembly, 60% of students were alarmed or concerned about climate change. Building off these results, in 2014 ACE began to assess the results of its leadership development program that follows the ACE Assembly. The goal of this survey project is to measure ACE's long-term impact on students' college and career pathways, civic engagement and climate action. Preliminary results show that a majority of students in ACE's leadership development program are alarmed about global warming and are having conversations about global warming. A majority of these students also feel confident in their ability to lead a climate-related campaign in their school and community. These students will continue to be surveyed through 2015.

  5. 94-1 Research and development project lead laboratory support. Status report, July 1, 1996--September 30, 1996

    SciTech Connect

    Rink, N.

    1997-03-01

    This document reports status and technical progress for Los Alamos 94-1 Research and Development projects. Updated schedule charts are shown in the appendix. This is the fourth status report published for Los Alamos National Laboratory 94-1 Research and Development Project Support. The Department of Energy Office of Environmental Management (DOE/EM) funds these projects in order to support the storage or disposal of legacy plutonium and plutonium-bearing materials resulting from weapons production throughout the DOE complex. This document also serves as an end-for-year review of projects and positions the program for FY97.

  6. Identifying Perceptions That Contribute to the Development of Successful Project Lead the Way Pre-Engineering Programs in Utah

    ERIC Educational Resources Information Center

    McMullin, Keith

    2013-01-01

    Many secondary schools in Utah have adopted the Project Lead the Way (PLTW) pre-engineering program. Little research has been conducted in Utah to show how successful these programs are or what factors are perceived to contribute to that success. This research is about defining PLTW program success and identifying factors perceived to improve…

  7. 94-1 Research and development project lead laboratory support. Status report, January 1--March 31, 1997

    SciTech Connect

    Rink, N.A.

    1997-08-01

    This status report is published for Los Alamos National Laboratory 94-1 Research and Development Project Support. The Department of Energy Office of Environmental Management funds these projects in order to support the storage or disposal of legacy plutonium and plutonium-bearing materials that resulted from weapons production throughout the DOE complex. This report summarizes status and technical progress for Los Alamos 94-1 projects during the second quarter of fiscal year 1997.

  8. 94-1 Research and Development Project Lead Laboratory Support. Status report, April 1, 1996--June 30, 1996

    SciTech Connect

    Dinehart, M.

    1996-10-01

    This document reports status and technical progress for Los Alamos 94-1 Research and Development projects concerned with the management of plutonium and plutonium contaminated materials during the third quarter of FY96.

  9. Development of a Laboratory Project to Determine Human ABO Genotypes--Limitations Lead to Further Student Explorations

    ERIC Educational Resources Information Center

    Salerno, Theresa A.

    2009-01-01

    A multiplex allele-specific PCR analysis was developed to identify six "common" genotypes: AA, AO, BB, BO, OO, and AB. This project included a pre-laboratory exercise that provided active learning experiences and developed critical thinking skills. This laboratory resulted in many successful analyses, which were verified by student knowledge of…

  10. CHICAGO BLOOD LEAD MAPPING PROJECT

    EPA Science Inventory

    Region 5's Office of Strategic Environmental Analysis (OSEA) undertook an effort to map blood lead data in the Chicago area and assess the associated risk factors that influence the elevated lead levels. The goal was to obtain individual blood lead results and map the data on th...

  11. 94-1 research and development project lead laboratory support. Status report, October 1--December 31, 1996

    SciTech Connect

    Rink, N.A.

    1997-07-01

    This status report is published for Los Alamos National Laboratory 94-1 Research and Development (R and D) projects. The Department of Energy Office of Environmental Management (DOE/EM) funds these projects in order to support the storage or disposal of legacy plutonium and plutonium-bearing materials that resulted from weapons production throughout the DOE complex. This report summarizes status and technical progress for Materials Identification and Surveillance; Stabilization Process Development; Surveillance and Monitoring; Core Technology; Separations; Materials Science; Synthesis and Structural Characterization of Plutonium(IV) and Plutonium(VI) Phosphates; Plutonium Phosphate Solution Chemistry; and Molten Salt/Nonaqueous Electrochemistry.

  12. 94-1 Research and Development Project Lead laboratory support. Status report, October 1--December 31, 1995

    SciTech Connect

    Dinehart, M.

    1996-05-01

    This is a quarterly progress report of the 94-1 Research and Development Lead Laboratory Support Technical Program Plan for the first quarter of FY 1996. The report provides details concerning descriptions, DOE-complex-wide material stabilization technology needs, scientific background and approach, progress, benefits to the DOE complex, and collaborations for selected subprojects. An executive summary and report on end-of-quarter spending is included.

  13. NASA DOD Lead Free Electronics Project

    NASA Technical Reports Server (NTRS)

    Kessel, Kurt R.

    2008-01-01

    The primary'technical objective of this project is to undertake comprehensive testing to generate information on failure modes/criteria to better understand the reliability of: Packages (e.g., Thin Small Outline Package [TSOP], Ball Grid Array [BGA], Plastic Dual In-line Package [PDIPD assembled and reworked with lead-free alloys Packages (e.g., TSOP, BGA, PDIP) assembled and reworked with mixed (lead/lead-free) alloys.

  14. Identifying Perceptions That Contribute to the Development of Successful Project Lead the Way Pre-Engineering Programs in Utah

    ERIC Educational Resources Information Center

    McMullin, Keith; Reeve, Edward

    2014-01-01

    An educational crisis has been reported from many scholarly platforms for the last quarter century. The United States is faced with the challenge of providing a secondary science, technology, engineering, and math (STEM) education, especially in secondary pre-engineering, that will lead its students to the fulfillment of academic and domestic…

  15. Curriculum Leadership in Action: A Tale of Four Community College Heads of Department Leading a Curriculum Development Project

    ERIC Educational Resources Information Center

    Albashiry, Nabeel M.; Voogt, Joke M.; Pieters, Jules M.

    2016-01-01

    College Heads of Department (HoDs) are increasingly expected to perform more curriculum-leadership tasks, maintaining and advancing the department curriculum, especially in developing countries. However, in practice, HoDs are reported to pay little attention to this aspect of their job due to several factors--one of which is a lack of professional…

  16. Lead Coolant Test Facility Development Workshop

    SciTech Connect

    Paul A. Demkowicz

    2005-06-01

    A workshop was held at the Idaho National Laboratory on May 25, 2005, to discuss the development of a next generation lead or lead-alloy coolant test facility. Attendees included representatives from the Generation IV lead-cooled fast reactor (LFR) program, Advanced Fuel Cycle Initiative, and several universities. Several participants gave presentations on coolant technology, existing experimental facilities for lead and lead-alloy research, the current LFR design concept, and a design by Argonne National Laboratory for an integral heavy liquid metal test facility. Discussions were focused on the critical research and development requirements for deployment of an LFR demonstration test reactor, the experimental scope of the proposed coolant test facility, a review of the Argonne National Laboratory test facility design, and a brief assessment of the necessary path forward and schedule for the initial stages of this development project. This report provides a summary of the presentations and roundtable discussions.

  17. Project LEAD, October 1, 1992-September 30, 1993. Program Evaluation.

    ERIC Educational Resources Information Center

    Vern, Janet

    This report describes and evaluates an adult literacy education program, Project LEAD (Literacy Education and Development), at the Adrian Public Library (Michigan). The project's objectives were to: recruit functionally illiterate adults and provide reading instruction to improve literacy skills; recruit and train 65 additional volunteer tutors…

  18. Bipolar lead acid battery development

    NASA Technical Reports Server (NTRS)

    Eskra, Michael; Vidas, Robin; Miles, Ronald; Halpert, Gerald; Attia, Alan; Perrone, David

    1991-01-01

    A modular bipolar battery configuration is under development at Johnson Control, Inc. (JCI) and the Jet Propulsion Laboratory (JPL). The battery design, incorporating proven lead acid electrochemistry, yields a rechargeable, high-power source that is light weight and compact. This configuration offers advantages in power capability, weight, and volume over conventional monopolar batteries and other battery chemistries. The lead acid bipolar battery operates in a sealed, maintenance-free mode allowing for maximum application flexibility. It is ideal for high-voltage and high-power applications.

  19. Bipolar lead acid battery development

    NASA Astrophysics Data System (ADS)

    Eskra, Michael; Vidas, Robin; Miles, Ronald; Halpert, Gerald; Attia, Alan; Perrone, David

    A modular bipolar battery configuration is under development at Johnson Control, Inc. (JCI) and the Jet Propulsion Laboratory (JPL). The battery design, incorporating proven lead acid electrochemistry, yields a rechargeable, high-power source that is light weight and compact. This configuration offers advantages in power capability, weight, and volume over conventional monopolar batteries and other battery chemistries. The lead acid bipolar battery operates in a sealed, maintenance-free mode allowing for maximum application flexibility. It is ideal for high-voltage and high-power applications.

  20. Early Owner Planning Leads to Project Success

    ERIC Educational Resources Information Center

    Gainsboro, Dan

    2006-01-01

    In the vast majority of building projects, decisions made in the first 10 percent of project activity directly determine 90 percent of the final cost and schedule. When a project is poorly planned, project costs can expand beyond estimates by as much as 50 percent. Since the owner's rate of spending increases as a building project proceeds,…

  1. Certification and Career Success: A LEADS Project

    ERIC Educational Resources Information Center

    Russ-Eft, Darlene; Dickison, Phil; Levine, Roger

    2008-01-01

    This study examines the relationship between certification examination test results and Emergency Medical Technician (EMT) career success. The sample was drawn from the Longitudinal Emergency Medical Technician Attributes and Demographics Study (LEADS). LEADS participants were matched with National Registry of Emergency Medical Technician (NREMT)…

  2. Leading Change through Faculty Development.

    ERIC Educational Resources Information Center

    Rouseff-Baker, Fay

    2002-01-01

    Describes how the Center for Excellence in Teaching and Learning at Parkland College, Illinois, has become a catalyst for major institutional change through the use of faculty-owned and -driven professional development programs, faculty leadership teams, and a supportive administration. Emphasizes the role of faculty as agents of change. Contains…

  3. Robotic Lander Development Project

    NASA Video Gallery

    The Robotic Lander Development Project at the Marshall Center is testing a prototype lander that will aid in the design and development of a new generation of small, smart, versatile robotic lander...

  4. Leading the Maricopa Millions OER Project

    ERIC Educational Resources Information Center

    Raneri, April; Young, Lisa

    2016-01-01

    With a reduced number of students purchasing required and necessary textbooks, higher education leaders must look to new opportunities to increase student success. While open educational resources have addressed this issue, they have not received widespread support from faculty, staff, and administrators. The Maricopa Millions OER Project: Scaling…

  5. Developments in lead-acid batteries: a lead producer's perspective

    NASA Astrophysics Data System (ADS)

    Frost, P. C.

    Rapid progress is being made in many aspects of materials, design and construction for lead-acid batteries. Much of this work has taken place under the auspices of the Advanced Lead-Acid Battery Consortium (ALABC). From the general tone of the literature, it seems likely that several of these developments will be adopted in commercial products, and that there will be cross-fertilization between the emerging electric vehicle (EV) battery technology and the starting, lighting and ignition (SLI) battery. Given the impetus for improvement from several different factors, the development process appears to be accelerating. To those not intimately involved in the battery design and specification process, it is not clear which of the possible developments will make it from the laboratory to general commercial adoption. Some of the possible changes in materials, design and construction could have an impact on the recovery, recycling, smelting and refining of lead-acid batteries. Some of the possible developments are outlined and their possible impact is discussed. It is likely that negative effects may be minimized if battery developments are considered from other perspectives, largely based on the overall life-cycle, as early in the design phase of new products as possible. Three strategies for minimizing undesirable effects are advocated: first, improved communication between car manufacturers, battery manufacturers and lead producers second, use of life-cycle analysis (LCA) to identify and optimize all attributes of the product throughout its life-cycle third, concerted and coordinated action to deal with issues important to the industry once trends are identified.

  6. An Action-Research Project: Community Lead Poisoning Prevention

    ERIC Educational Resources Information Center

    Rajaram, Shireen S.

    2007-01-01

    This action-research project focused on gathering data on awareness of lead poisoning, as well as disseminating information on lead poisoning prevention in a metropolitan midwestern city. This project reflects an action-research approach to service learning and was in collaboration with a grass-roots organization. This paper outlines the daunting…

  7. Energy Efficiency Project Development

    SciTech Connect

    IUEP

    2004-03-01

    The International Utility Efficiency Partnerships, Inc. (IUEP) has been a leader among the industry groups that have supported voluntary initiatives to promote international energy efficiency projects and address global climate change. The IUEP maintains its leadership by both supporting international greenhouse gas (GHG) reduction projects under the auspices of the U.S. Department of Energy (DOE) and by partnering with U.S. and international organizations to develop and implement strategies and specific energy efficiency projects. The goals of the IUEP program are to (1) provide a way for U.S. industry to maintain a leadership role in international energy efficiency infrastructure projects; (2) identify international energy project development opportunities to continue its leadership in supporting voluntary market-based mechanisms to reduce GHG emissions; and (3) demonstrate private sector commitment to voluntary approaches to global climate issues. The IUEP is dedicated to identifying, promoting, managing, and assisting in the registration of international energy efficiency projects that result in demonstrated voluntary reductions of GHG emissions. This Final Technical Report summarizes the IUEP's work in identifying, promoting, managing, and assisting in development of these projects and IUEP's effort in creating international cooperative partnerships to support project development activities that develop and deploy technologies that (1) increase efficiency in the production, delivery and use of energy; (2) increase the use of cleaner, low-carbon fuels in processing products; and (3) capture/sequester carbon gases from energy systems. Through international cooperative efforts, the IUEP intends to strengthen partnerships for energy technology innovation and demonstration projects capable of providing cleaner energy in a cost-effective manner. As detailed in this report, the IUEP met program objectives and goals during the reporting period January 1, 2001 through

  8. NASA-DoD Lead-Free Electronics Project

    NASA Technical Reports Server (NTRS)

    Kessel, Kurt R.

    2009-01-01

    In response to concerns about risks from lead-free induced faults to high reliability products, NASA has initiated a multi-year project to provide manufacturers and users with data to clarify the risks of lead-free materials in their products. The project will also be of interest to component manufacturers supplying to high reliability markets. The project was launched in November 2006. The primary technical objective of the project is to undertake comprehensive testing to generate information on failure modes/criteria to better understand the reliability of: - Packages (e.g., TSOP, BGA, PDIP) assembled and reworked with solder interconnects consisting of lead-free alloys - Packages (e.g., TSOP, BGA, PDIP) assembled and reworked with solder interconnects consisting of mixed alloys, lead component finish/lead-free solder and lead-free component finish/SnPb solder.

  9. NASA-DoD Lead-Free Electronics Project

    NASA Technical Reports Server (NTRS)

    Kessel, Kurt R.

    2009-01-01

    In response to concerns about risks from lead-free induced faults to high reliability products, NASA has initiated a multi-year project to provide manufacturers and users with data to clarify the risks of lead-free materials in their products. The project will also be of interest to component manufacturers supplying to high reliability markets. The project was launched in November 2006. The primary technical objective of the project is to undertake comprehensive testing to generate information on failure modes/criteria to better understand the reliability of: - Packages (e.g., TSOP, BOA, PDIP) assembled and reworked with solder interconnects consisting of lead-free alloys - Packages (e.g., TSOP, BOA, PDIP) assembled and reworked with solder interconnects consisting of mixed alloys, lead component finish/lead-free solder and lead-free component finish/SnPb solder.

  10. NASA-DoD Lead-Free Electronics Project

    NASA Technical Reports Server (NTRS)

    Kessel, Kurt

    2009-01-01

    In response to concerns about risks from lead-free induced faults to high reliability products, NASA has initiated a multi-year project to provide manufacturers and users with data to clarify the risks of lead-free materials in their products. The project will also be of interest to component manufacturers supplying to high reliability markets. The project was launched in November 2006. The primary technical objective of the project is to undertake comprehensive testing to generate information on failure modes/criteria to better understand the reliability of: (1) Packages (e.g., Thin Small Outline Package [TSOP], Ball Grid Array [BGA], Plastic Dual In-line Package [PDIP]) assembled and reworked with solder interconnects consisting of lead-free alloys (2) Packages (e.g., TSOP, BGA, PDIP) assembled and reworked with solder interconnects consisting of mixed alloys, lead component finish/lead-free solder and lead-free component finish/SnPb solder

  11. NASA-DoD Lead-Free Electronics Project

    NASA Technical Reports Server (NTRS)

    Kessel, Kurt

    2010-01-01

    This slide presentation reviews the current state of the lead-free electronics project. It characterizes the test articles, which were built with lead-free solder and lead-free component finishes. The tests performed and reported on are: thermal cycling, combine environments testing, mechanical shock testing, vibration testing and drop testing.

  12. NASA-DoD Lead-Free Electronics Project

    NASA Technical Reports Server (NTRS)

    Kessel, Kurt

    2007-01-01

    The primary technical objective of the project is to undertake comprehensive testing to generate information on failure modes/criteria to better understand the reliability of: Packages (e.g., TSOP, BGA, PDIP) assembled and reworked with lead-free alloys Packages (e.g., TSOP, BGA, PDIP) assembled and reworked with mixed (lead/lead-free) alloys.

  13. Renewable energy project development

    SciTech Connect

    Ohi, J.

    1996-12-31

    The author presents this paper with three main thrusts. The first is to discuss the implementation of renewable energy options in China, the second is to identify the key project development steps necessary to implement such programs, and finally is to develop recommendations in the form of key issues which must be addressed in developing such a program, and key technical assistance needs which must be addressed to make such a program practical.

  14. The Child Development Project.

    ERIC Educational Resources Information Center

    Developmental Studies Center, San Ramon, CA.

    In the context of a regular academic program, the Child Development Project (CDP) helps teachers and parents promote characteristics such as helpfulness and responsibility in children in kindergarten through sixth grade. The CDP program contains five major elements: (1) cooperative activities; (2) helping activities; (3) the highlighting of…

  15. Project Lead the Way Students More Prepared for Higher Education

    ERIC Educational Resources Information Center

    Van Overschelde, James P.

    2013-01-01

    Project Lead the Way (PLTW) is a hands-on, project-based engineering curriculum for high school and middle school students, which has quadrupled annual enrollment in Texas in five years to over 23,000 students. The diversity of students participating has also increased dramatically. Using six years of longitudinally-linked student data, the…

  16. Lead-calcium alloy development: quality improvement

    NASA Astrophysics Data System (ADS)

    Caillerie, J.-L.; Albert, L.

    In the 1980s, most of the European lead producers and battery manufacturers had an interest in the lead-calcium alloys developed in the North American market. Fifteen years later, the alloy is used in most of the automotive and industrial batteries produced in Europe. During this development period, the composition of lead-calcium alloy has been improved. Physical metallurgy and electrochemistry research carried out by the lead industry has established the composition of the lead-calcium for negative grids. Metaleurop, as a lead producer, initiated in 1975 the production of lead-calcium alloys for sealed lead/acid batteries and was quickly convinced of the necessity to improve the performance of the alloy by further fundamental research (in 1980) and supporting customers' efforts. The parameters involved in the production battery plates are well specified. The composition of the alloy is dependent on the equipment used to cast the alloy. Improving the hardness by increasing the calcium content over 0.10 wt.% may not be the solution when melting and cooling conditions should als be adapted. The addition of aluminium to prevent calcium oxidation is efficient, its level being linked to the remelting and casting conditions.

  17. NASA-DoD Lead-Free Electronics Project

    NASA Technical Reports Server (NTRS)

    Kessel, Kurt R.

    2009-01-01

    The primary technical objective of this project is to undertake comprehensive testing to generate information on failure modes/criteria to better understand the reliability of: (1) Packages (e.g., Thin Small Outline Package [TSOP], Ball Grid Array [BGA], Plastic Dual In-line Package [PDIP]) assembled and reworked with lead-free alloys, (2) Packages (e.g., TSOP, BGA, PDIP) assembled and reworked with mixed (lead/lead-free) alloys.

  18. Development of Lead-Free Copper Alloy-Graphite Castings

    SciTech Connect

    Rohatgi, P.K.

    1999-10-01

    In this project, graphite is used as a substitute for lead in order to maintain the machinability of plumbing components at the level of leaded brass. Graphite dispersed in Cu alloy was observed to impart good machinability and reduce the sizes of chips during machining of plumbing components in a manner similar to lead. Copper alloys containing dispersed graphite particles could be successfully cast in several plumbing fixtures which exhibited acceptable corrosion rate, solderability, platability, and pressure tightness. The power consumption for machining of composites was also lower than that of the matrix alloy. In addition, centrifugally cast copper alloy cylinders containing graphite particles were successfully made. These cylinders can therefore be used for bearing applications, as substitutes for lead-containing copper alloys. The results indicate that copper graphite alloys developed under this DOE project have a great potential to substitute for lead copper alloys in both plumbing and bearing applications.

  19. Development of lead-free solders for hybrid microcircuits

    SciTech Connect

    Hosking, F.M.; Vianco, P.T.; Frear, D.R.; Robinson, D.G.

    1996-01-01

    Extensive work has been conducted by industry to develop lead-free solders for electronics applications. The driving force behind this effort is pressure to ban or tax the use of lead-bearing solders. There has been further interest to reduce the use of hazardous chemical cleaners. Lead-free soldering and low-residue, ``no clean`` assembly processing are being considered as solutions to these environmental issues. Most of the work has been directed toward commercial and military printed wiring board (PWB) technology, although similar problems confront the hybrid microcircuit (HMC) industry, where the development of lead-free HMC solders is generally lagging. Sandia National Laboratories is responsible for designing a variety of critical, high reliability hybrid components for radars. Sandia has consequently initiated a project, as part of its Environmentally Conscious Manufacturing program, to develop low-residue, lead-free soldering for HMCs. This paper discusses the progress of that work.

  20. High-Temperature Gas-Cooled Reactor Steam Cycle/Cogeneration Lead Project strategy plan

    SciTech Connect

    1982-03-01

    The strategy for developing the HTGR system and introducing it into the energy marketplace is based on using the most developed technology path to establish a HTGR-Steam Cycle/Cogeneration (SC/C) Lead Project. Given the status of the HTGR-SC/C technology, a Lead Plant could be completed and operational by the mid 1990s. While there is remaining design and technology development that must be accomplished to fulfill technical and licensing requirements for a Lead Project commitment, the major barriers to the realization a HTGR-SC/C Lead Project are institutional in nature, e.g. Project organization and management, vendor/supplier development, cost/risk sharing between the public and private sector, and Project financing. These problems are further exacerbated by the overall pervading issues of economic and regulatory instability that presently confront the utility and nuclear industries. This document addresses the major institutional issues associated with the HTGR-SC/C Lead Project and provides a starting point for discussions between prospective Lead Project participants toward the realization of such a Project.

  1. Professional Development Leading to Sustained Change

    ERIC Educational Resources Information Center

    Stickney, Catherine Alaimo

    2012-01-01

    Determining effective change that leads to sustainable improved student achievement remains an elusive goal for most educational communities. This research addresses the question of what factors of professional development promote sustained change within a school organization. The survey questions focus on the formation of professional learning…

  2. Leading Practice Development: Voices from the Middle

    ERIC Educational Resources Information Center

    Grootenboer, Peter; Edwards-Groves, Christine; Rönnerman, Karin

    2015-01-01

    Leadership has long been acknowledged as a significant dimension in effective school functioning and, indeed, school leaders can play a substantial role in professional development of staff. Here we have centred on the "practices of leading" as opposed to the qualities or characteristics of leaders, and this is emphasised by our use of…

  3. Project Management for International Development.

    ERIC Educational Resources Information Center

    Axelrod, Valija M.; Magisos, Joel H.

    A project developed a content model for international project management training. It also compiled a bibliography of project management references, identified specific project management training needs based upon a survey of international sponsors and contractor personnel, and documented the training needs of international project managers. Data…

  4. Development of beam lead RF integrated circuits

    NASA Technical Reports Server (NTRS)

    Kline, A. J.; Kermode, A. W.

    1975-01-01

    This paper describes the design and development of a set of multifunction VHF/UHF integrated circuits aimed at providing a major improvement in spacecraft radio reliability through low stress operation and the processing of these circuits in beam-lead form. The methods evolved for the high frequency characterization of the devices are discussed together with the design of suitable test fixtures. Typical test results and the distribution of test parameters are presented. A unique carrier for beam-lead devices is described, and the need for such a device is discussed. The application of the carrier to device screening, burn-in and drift measurements is discussed together with the incentives for providing these capabilities. An overview of the integration of the devices into the spacecraft radio is given and candidate assembly processes are discussed. The technology impact of this approach upon future spacecraft radio systems is qualitatively examined.

  5. Motivational messages: lead a Baby Friendly Initiative community project.

    PubMed

    Henry, Sue; Butler, Donna

    2012-01-01

    2011 saw Baby Friendly Initiative (BFI) success in the towns of Blackburn with Darwen. The towns serve around 2,500 new babies a year, have significant social deprivation and mixed ethnicity. Commitment was made by the Trust and Local Authority, to progress to meeting full BFI standards by commissioning the Acute Trusts Infant Feeding Coordinator (midwife) to lead on the project and the change needed. Numerous challenges were met along the way, such as capacity to lead and deliver (leading to the recruitment of Donna), swine flu, GP training, organisational changes and loss of ante- and postnatal interventions. This was the first Community Trust in England to achieve full accreditation without follow up visits. This article hopes to inspire other Trusts to get started, keep going and don't let go until you get there--because it's worth it. PMID:22324135

  6. Developing Government Renewable Energy Projects

    SciTech Connect

    Kurt S. Myers; Thomas L. Baldwin; Jason W. Bush; Jake P. Gentle

    2012-07-01

    The US Army Corps of Engineers has retained Idaho National Laboratory (INL) to conduct a study of past INL experiences and complete a report that identifies the processes that are needed for the development of renewable energy projects on government properties. The INL has always maintained expertise in power systems and applied engineering and INL’s renewable energy experiences date back to the 1980’s when our engineers began performing US Air Force wind energy feasibility studies and development projects. Over the last 20+ years of working with Department of Defense and other government agencies to study, design, and build government renewable projects, INL has experienced the do’s and don’ts for being successful with a project. These compiled guidelines for government renewable energy projects could include wind, hydro, geothermal, solar, biomass, or a variety of hybrid systems; however, for the purpose of narrowing the focus of this report, wind projects are the main topic discussed throughout this report. It is our thought that a lot of what is discussed could be applied, possibly with some modifications, to other areas of renewable energy. It is also important to note that individual projects (regardless the type) vary to some degree depending on location, size, and need but in general these concepts and directions can be carried over to the majority of government renewable energy projects. This report focuses on the initial development that needs to occur for any project to be a successful government renewable energy project.

  7. [Development of lead benchmarks for soil based on human blood lead level in China].

    PubMed

    Zhang, Hong-zhen; Luo, Yong-ming; Zhang, Hai-bo; Song, Jing; Xia, Jia-qi; Zhao, Qi-guo

    2009-10-15

    Lead benchmarks for soil are mainly established based on blood lead concentration of children. This is because lead plays a dramatically negative role in children's cognitive development and intellectual performance and thus soil lead has been concerned as main lead exposure source for children. Based on the extensively collection of domestic available data, lead levels in air, drinking water are 0.12-1.0 microg x m(-3) and 2-10 microg x L(-1); ingestion of lead from food by children of 0-6 years old is 10-25 microg x d(-1); geometric mean of women blood lead 1concentration of child bearing age is 4.79 microg x dL(-1), with 1.48 GSD. Lead benchmarks for soil were calculated with the Integration Exposure Uptake Biokinetic Model (IEUBK) and the Adult Lead Model (ALM). The results showed the lead criteria values for residual land and commercial/industrial land was 282 mg x kg(-1) and 627 mg x kg(-1) respectively, which was slightly lower compared with U.S.A. and U.K. Parameters sensitivity analysis indicated that lead exposure scenario of children in China was significantly different from children in developed countries and children lead exposure level in China was obviously higher. Urgent work is required for the relationship studies between lead exposure scenario and blood lead level of children and establishment of risk assessment guideline of lead contaminated soil based on human blood lead level. PMID:19968127

  8. Developments in lead/acid stationary batteries

    NASA Astrophysics Data System (ADS)

    Hosking, Don

    1993-05-01

    Valve-regulated designs of the lead/acid system are securing significant shares of the markets for stationary batteries. This paper discusses the major problems that have been encountered with the introduction of valve-generated technology. Areas that have provided particular difficulties include: (1) acid leakage (container-cover, post-seal and vent leaks); (2) adverse effects of ripple current; (3) variations in float voltage, and (4) initial value of recharge current.

  9. Incentive contracts for development projects

    NASA Astrophysics Data System (ADS)

    Finley, David T.; Smith, Byron; DeGroff, B.

    2012-09-01

    Finding a contract vehicle that balances the concerns of the customer and the contractor in a development project can be difficult. The customer wants a low price and an early delivery, with as few surprises as possible as the project progresses. The contractor wants sufficient cost and schedule to cover risk. Both want to clearly define what each party will provide. Many program offices do not want to award cost plus contracts because their funding sources will not allow it, their boards do not want an open ended commitment, and they feel like they lose financial control of the project. A fixed price incentive contract, with a mutually agreed upon target cost, provides the owner with visibility into the project and input into the execution of the project, encourages both parties to save costs, and stimulates a collaborative atmosphere by aligning the respective interests of customers and contractors.

  10. SCHOOL CONSTRUCTION SYSTEMS DEVELOPMENT PROJECT.

    ERIC Educational Resources Information Center

    BOICE, JOHN,; AND OTHERS

    ONE-HUNDRED MANUFACTURERS EXPRESSED INTEREST IN BIDDING FOR A SYSTEM ON SCHOOL CONSTRUCTION CALLED SCSD OR SCHOOL CONSTRUCTION SYSTEMS DEVELOPMENT TO THE FIRST CALIFORNIA COMMISSION ON SCHOOL CONSTRUCTION SYSTEMS. TWENTY-TWO BUILDINGS COMPRISED THE PROJECT. THE OBJECTIVE WAS TO DEVELOP AN INTEGRATED SYSTEM OF STANDARD SCHOOL BUILDING COMPONENTS…

  11. Dorchester Lead-Safe Yard project: a pilot program to demonstrate low-cost, on-site techniques to reduce exposure to lead-contaminated soil.

    PubMed

    Hynes, H P; Maxfield, R; Carroll, P; Hillger, R

    2001-03-01

    Despite a general reduction in blood lead levels in children after lead was banned in gasoline and paint, lead poisoning remains an important health problem in many older urban areas. One factor that increases risk in these places is the high levels of lead in certain residential areas. A major intervention study found that reducing lead levels in urban soils results in a reduction in exposed children's blood lead levels. Removing lead from inner-city soils or reducing exposures to lead-contaminated soils typically is expensive, technologically challenging, or beyond the ability of low-income households to undertake. This project, in conjunction with residents and community-based institutions, developed a series of in situ, low-cost, low-technology measures that worked to reduce the exposure to lead-contaminated soils in one Boston, Massachusetts, neighborhood. The project demonstrated several important results. Government, universities, residents, and community based organizations can work together effectively to reduce exposures to lead in soil. Lead-contaminated soil can be mitigated at a fraction of the cost of conventional methods in ways that increase the ability of residents, community health centers, and others to have a positive impact on their neighborhoods. A lead-safe yard program can be replicated and institutionalized by municipal home de-leading programs and other community organizations. PMID:11368198

  12. Leading Staff Development for School Improvement

    ERIC Educational Resources Information Center

    Bubb, Sara; Earley, Peter

    2009-01-01

    As part of a CfBT Education Trust funded study, we investigated the practical steps school leaders can take to ensure that self-evaluation of school performance led, through the effective staff development, to genuine school improvement. On the journey from self-evaluation to school improvement our research identified what schools did that worked,…

  13. Managing MDO Software Development Projects

    NASA Technical Reports Server (NTRS)

    Townsend, J. C.; Salas, A. O.

    2002-01-01

    Over the past decade, the NASA Langley Research Center developed a series of 'grand challenge' applications demonstrating the use of parallel and distributed computation and multidisciplinary design optimization. All but the last of these applications were focused on the high-speed civil transport vehicle; the final application focused on reusable launch vehicles. Teams of discipline experts developed these multidisciplinary applications by integrating legacy engineering analysis codes. As teams became larger and the application development became more complex with increasing levels of fidelity and numbers of disciplines, the need for applying software engineering practices became evident. This paper briefly introduces the application projects and then describes the approaches taken in project management and software engineering for each project; lessons learned are highlighted.

  14. Wisconsin's Mathematics Talent Development Project.

    ERIC Educational Resources Information Center

    Rolland, Al; Schuster, Nancy

    1988-01-01

    The Mathematics Talent Development Project offers accelerated mathematics to students aged 10-14, on Saturdays at the University of Wisconsin-Eau Claire. Four years of high-school mathematics are covered in two years, including algebra, geometry, trigonometry, and statistics. Described are student selection, importance of homework, and teacher…

  15. Hualapai Tribal Utility Development Project

    SciTech Connect

    Hualapai Tribal Nation

    2008-05-25

    The first phase of the Hualapai Tribal Utility Development Project (Project) studied the feasibility of establishing a tribally operated utility to provide electric service to tribal customers at Grand Canyon West (see objective 1 below). The project was successful in completing the analysis of the energy production from the solar power systems at Grand Canyon West and developing a financial model, based on rates to be charged to Grand Canyon West customers connected to the solar systems, that would provide sufficient revenue for a Tribal Utility Authority to operate and maintain those systems. The objective to establish a central power grid over which the TUA would have authority and responsibility had to be modified because the construction schedule of GCW facilities, specifically the new air terminal, did not match up with the construction schedule for the solar power system. Therefore, two distributed systems were constructed instead of one central system with a high voltage distribution network. The Hualapai Tribal Council has not taken the action necessary to establish the Tribal Utility Authority that could be responsible for the electric service at GCW. The creation of a Tribal Utility Authority (TUA) was the subject of the second objective of the project. The second phase of the project examined the feasibility and strategy for establishing a tribal utility to serve the remainder of the Hualapai Reservation and the feasibility of including wind energy from a tribal wind generator in the energy resource portfolio of the tribal utility (see objective 2 below). It is currently unknown when the Tribal Council will consider the implementation of the results of the study. Objective 1 - Develop the basic organizational structure and operational strategy for a tribally controlled utility to operate at the Tribe’s tourism enterprise district, Grand Canyon West. Coordinate the development of the Tribal Utility structure with the development of the Grand Canyon

  16. The LAUE project: latest developments

    NASA Astrophysics Data System (ADS)

    Liccardo, V.; Virgilli, E.; Frontera, F.; Rosati, P.

    2016-04-01

    We present the status of the LAUE project devoted to develop a technology for building long focal length Laue lenses for hard X-/soft gamma-ray astronomy (80-600 keV). The Laue lens will be composed of bent crystals of Gallium Arsenide (GaAs, 220) and Germanium (Ge, 111), and, for the first time, the focusing property of bent crystals will be exploited for this field of applications. At the present the goal of the project is the building of a 20 m focal length Laue lens petal capable of focusing X-ray in the energy range 90-300 keV.

  17. Current Lead Design for the Accelerator Project for Upgrade of LHC

    SciTech Connect

    Brandt, Jeffrey S.; Cheban, Sergey; Feher, Sandor; Kaducak, Marc; Nobrega, Fred; Peterson, Tom

    2010-01-01

    The Accelerator Project for Upgrade of LHC (APUL) is a U.S. project participating in and contributing to CERN's Large Hadron Collider (LHC) upgrade program. In collaboration with Brookhaven National Laboratory, Fermilab is developing sub-systems for an upgrade of the LHC final focus magnet systems. A concept of main and auxiliary helium flow was developed that allows the superconductor to remain cold while the lead body warms up to prevent upper section frosting. The auxiliary flow will subsequently cool the thermal shields of the feed box and the transmission line cryostats. A thermal analysis of the current lead central heat exchange section was performed using analytic and FEA techniques. A method of remote soldering was developed that allows the current leads to be field replaceable. The remote solder joint was designed to be made without flux or additional solder, and able to be remade up to ten full cycles. A method of upper section attachment was developed that allows high pressure sealing of the helium volume. Test fixtures for both remote soldering and upper section attachment for the 13 kA lead were produced. The cooling concept, thermal analyses, and test results from both remote soldering and upper section attachment fixtures are presented.

  18. NASA-DoD Lead-Free Electronics Project

    NASA Technical Reports Server (NTRS)

    Kessel, Kurt

    2010-01-01

    Original Equipment Manufacturers (OEMs), depots, and support contract ors have to be prepared to deal with an electronics supply chain that increasingly provides parts with lead-free finishes, some labeled no differently and intermingled with their SnPb counterparts. Allowance of lead-free components presents one of the greatest risks to the r eliability of military and aerospace electronics. The introduction of components with lead-free terminations, termination finishes, or cir cuit boards presents a host of concerns to customers, suppliers, and maintainers of aerospace and military electronic systems such as: 1. Electrical shorting due to tin whiskers 2. Incompatibility of lead-f ree processes and parameters (including higher melting points of lead -free alloys) with other materials in the system 3. Unknown material properties and incompatibilities that could reduce solder joint reli ability As the transition to lead-free becomes a certain reality for military and aerospace applications, it will be critical to fully un derstand the implications of reworking lead-free assemblies.

  19. URBAN SOIL LEAD ABATEMENT DEMONSTRATION PROJECT: VOLUME I, U.S. EPA INTEGRATED REPORT

    EPA Science Inventory

    The Urban Soil Lead Abatement Demonstration Project (USLADP), known also as the A Three City Lead Study,was authorized in 1986 under Section 111(b)(6) of the Superfund Amendments and Reauthorization Act (SARA), which mandated that EPA conduct soil lead abatement projects in up to...

  20. Lead

    MedlinePlus

    ... Lead Share Facebook Twitter Google+ Pinterest Contact Us Lead Poisoning is Preventable If your home was built before ... of the RRP rule. Read more . Learn about Lead Poisoning Prevention Week . Report Uncertified Contractors and Environmental Violations ...

  1. Landsat, computers, and development projects.

    PubMed

    Adrien, P M; Baumgardner, M F

    1977-11-01

    Data provided by earth-orbiting satellites and analyzed through specific computer techniques are rapidly providing policy-makers around the world with new information on the location and extent of their countries' renewable and nonrenewable resources. Development projects utilizing remote sensing technology are being supported, for example, by the Inter-American Development Bank, the World Bank, and other international funding agencies. The Inter-American Development Bank is financing a natural resources inventory of five countries in Central America, and this will require the application of remote sensing in the analysis of 33 Landsat images covering the area. Although the Landsat program remains experimental in nature, studies pertaining to its follow-on aspects will ensure continuation of the program so that developed and developing countries will be able to maintain better control of the management of their natural resources. PMID:17842110

  2. Space market model development project

    NASA Technical Reports Server (NTRS)

    Bishop, Peter C.

    1987-01-01

    The objectives of the research program, Space Market Model Development Project, (Phase 1) were: (1) to study the need for business information in the commercial development of space; and (2) to propose a design for an information system to meet the identified needs. Three simultaneous research strategies were used in proceeding toward this goal: (1) to describe the space business information which currently exists; (2) to survey government and business representatives on the information they would like to have; and (3) to investigate the feasibility of generating new economical information about the space industry.

  3. D0 Solenoid Upgrade Project: D0 Solenoid Current Leads

    SciTech Connect

    Rucinski, R.; /Fermilab

    1993-10-04

    This engineering note documents information gathered and design decisions made regarding the vapor cooled current leads for the D-Zero Solenoid. The decision was made during design group meetings that the D-Zero Solenoid, rated at 4825 amps, should use vapor cooled current leads rated at 6000 amps. CDF uses 6000 amp leads from American Magnetics Inc. (AMI) and has two spares in their storage lockers. Because of the spares situation and AMI's reputation, AMI would be the natural choice of vendor. The manufacturer's listed helium consumption is 19.2 liters/hr. From experience with these types of leads, more stable operation is acheived at an increased gas flow. See attached E-Mail message from RLS. We have decided to list the design flow rate at 28.8 liquid liters/hr in the design report. This corresponds to COFs operating point. A question was raised regarding how long the current leads could last at full current should the vapor cooling flow was stopped. This issue was discussed with Scott Smith from AMI. We do not feel that there is a problem for this failure scenario.

  4. Advanced Software Development Workstation Project

    NASA Technical Reports Server (NTRS)

    Lee, Daniel

    1989-01-01

    The Advanced Software Development Workstation Project, funded by Johnson Space Center, is investigating knowledge-based techniques for software reuse in NASA software development projects. Two prototypes have been demonstrated and a third is now in development. The approach is to build a foundation that provides passive reuse support, add a layer that uses domain-independent programming knowledge, add a layer that supports the acquisition of domain-specific programming knowledge to provide active support, and enhance maintainability and modifiability through an object-oriented approach. The development of new application software would use specification-by-reformulation, based on a cognitive theory of retrieval from very long-term memory in humans, and using an Ada code library and an object base. Current tasks include enhancements to the knowledge representation of Ada packages and abstract data types, extensions to support Ada package instantiation knowledge acquisition, integration with Ada compilers and relational databases, enhancements to the graphical user interface, and demonstration of the system with a NASA contractor-developed trajectory simulation package. Future work will focus on investigating issues involving scale-up and integration.

  5. NASA-DoD Lead-Free Electronics Project

    NASA Technical Reports Server (NTRS)

    Kessel, Kurt

    2011-01-01

    Original Equipment Manufacturers (OEMs). depots. and support contractors have to be prepared to deal with an electronics supply chain thaI increasingly provides parts with lead-free finishes. some labeled no differently and intenningled with their SnPb counterparts. Allowance oflead-free components presents one of the greatest risks to the reliability of military and aerospace electronics. The introduction of components with lead-free lenninations, tennination finishes, or circuit boards presents a host of concerns to customers. suppliers, and maintainers of aerospace and military electronic systems such as: 1. Electrical shorting due to tin whiskers; 2. Incompatibility oflead-free processes and parameters (including higher melting points of lead-free alloys) with other materials in the system; and 3. Unknown material properties and incompatibilities that could reduce solder joint re liability.

  6. Neighborhood Energy/Economic Development project

    SciTech Connect

    Not Available

    1991-12-31

    Energy costs impact low income communities more than anyone else. Low income residents pay a larger percentage of their incomes for energy costs. In addition, they generally have far less discretionary energy use to eliminate in response to increasing energy prices. Furthermore, with less discretionary income, home energy efficiency improvements are often too expensive. Small neighborhood businesses are in the same situation. Improved efficiency in the use of energy can improve this situation by reducing energy costs for residents and local businesses. More importantly, energy management programs can increase the demand for local goods and services and lead to the creation of new job training and employment opportunities. In this way, neighborhood based energy efficiency programs can support community economic development. The present project, undertaken with the support of the Urban Consortium Energy Task Force, was intended to serve as a demonstration of energy/economic programming at the neighborhood level. The San Francisco Neighborhood Energy/Economic Development (NEED) project was designed to be a visible demonstration of bringing the economic development benefits of energy management home to low-income community members who need it most. To begin, a Community Advisory Committee was established to guide the design of the programs to best meet needs of the community. Subsequently three neighborhood energy/economic development programs were developed: The small business energy assistance program; The youth training and weatherization program; and, The energy review of proposed housing development projects.

  7. Development of new sealed bipolar lead-acid battery

    NASA Technical Reports Server (NTRS)

    Attia, Alan I.; Rowlette, J. J.

    1987-01-01

    New light weight composite bipolar plates which can withstand the corrosive environment of the lead acid battery have made possible the construction of a sealed bipolar lead acid battery that promises to achieve very high specific power levels and substantially higher energy densities than conventional lead acid batteries. Performance projections based on preliminary experimental results show that the peak specific power of the battery can be as high as 90 kW/kg, and that a specific power of 5 kW/kg can be sustained over several thousand pulses.

  8. DELSY project: status and development.

    PubMed

    Balalykin, N; Beloshitsky, P; Bykovsky, V; Kobets, V; Kolobanov, V; Kulipanov, G; Levichev, E; Mikhaylin, V; Meshkov, I; Mezentsev, N; Morozov, N; Seleznev, I; Sidorov, G; Skrinsky, A; Shirkov, G; Syresin, E; Titkova, I; Yurkov, M

    2003-09-01

    The DELSY (Dubna Electron Synchrotron) project is under development at the Joint Institute for Nuclear Research [Arkhipov et al. (2001). Nucl. Instrum. Methods, A467, 57-62; Arkhipov et al. (2001). Nucl. Instrum. Methods, A470, 1-6; Titkova et al. (2000). Proceedings of the Seventh European Particle Accelerator Conference, pp. 702-704]. It is based on an acceleration facility donated to the Joint Institute for Nuclear Research by the Institute for Nuclear and High Energy Physics (NIKHEF, Amsterdam). The NIKHEF accelerator facility consists of the linear electron accelerator MEA, which has an electron energy of 700 MeV, and the electron storage ring AmPS, with a maximum energy of 900 MeV and a beam current of 200 mA. There are three phases to the construction of the DELSY facility. Phase I will be accomplished with the construction of a complex of free-electron lasers covering continuously the spectrum from the far infrared down to the ultraviolet ( approximately 150 nm). Phase II will be accomplished with the commissioning of the storage ring DELSY. Complete commissioning of the DELSY project will take place after finishing Phase III, the construction of an X-ray free-electron laser. This phase is considered as the ultimate goal of the project; it is currently under development and is not described in this paper. PMID:12944618

  9. Lead

    MedlinePlus

    ... obvious symptoms, it frequently goes unrecognized. CDC’s Childhood Lead Poisoning Prevention Program is committed to the Healthy People ... Lead Levels Information for Parents Tips for preventing lead poisoning About Us Overview of CDC’s Childhood Lead Poisoning ...

  10. Leading Curriculum Innovation in Primary Schools Project: A Final Report

    ERIC Educational Resources Information Center

    Brundrett, Mark; Duncan, Diane

    2015-01-01

    This article provides the final report on a research project that investigated the ways in which curriculum innovation can be led successfully in primary schools. Data gathering included 40 semi-structured interviews in 10 successful primary schools in England of varying sizes and types and in a range of geographical and social locations. Findings…

  11. Interdisciplinary Project-Based Learning Leads to Success

    ERIC Educational Resources Information Center

    Anderson, James

    2010-01-01

    Project-based learning and academic integration are integral parts of the automotive technology program at Greenville High School. This Ohio comprehensive school has used both of these strategies for the past 15 years and their success is reflected in nine state SkillsUSA gold medals and one bronze, in addition to eight gold medals earned at the…

  12. Project Update: ZVI Used for Arsenic from Lead Smelting Facility

    EPA Science Inventory

    The U.S. EPA Office of Research and Development’s National Risk Management Research Laboratory (NRMRL) is conducting long-term monitoring of a granular iron permeable reactive barrier (PRB) for remediation of ground water contaminated with arsenic from a former lead smelting faci...

  13. 7 CFR 550.16 - Project development.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Project development. 550.16 Section 550.16 Agriculture... § 550.16 Project development. REE provides partial funding to Cooperators to support research projects... the REE Agency's ADODR shall jointly develop the following documentation: (a) Project plan. A...

  14. 23 CFR 660.112 - Project development.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Project development. 660.112 Section 660.112 Highways... PROGRAMS (DIRECT FEDERAL) Forest Highways § 660.112 Project development. (a) Projects to be administered by... Program. Projects to be administered by a cooperator shall be developed in accordance with...

  15. 23 CFR 660.112 - Project development.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 23 Highways 1 2012-04-01 2012-04-01 false Project development. 660.112 Section 660.112 Highways... PROGRAMS (DIRECT FEDERAL) Forest Highways § 660.112 Project development. (a) Projects to be administered by... Program. Projects to be administered by a cooperator shall be developed in accordance with...

  16. 23 CFR 660.112 - Project development.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 23 Highways 1 2014-04-01 2014-04-01 false Project development. 660.112 Section 660.112 Highways... PROGRAMS (DIRECT FEDERAL) Forest Highways § 660.112 Project development. (a) Projects to be administered by... Program. Projects to be administered by a cooperator shall be developed in accordance with...

  17. 23 CFR 660.112 - Project development.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 23 Highways 1 2013-04-01 2013-04-01 false Project development. 660.112 Section 660.112 Highways... PROGRAMS (DIRECT FEDERAL) Forest Highways § 660.112 Project development. (a) Projects to be administered by... Program. Projects to be administered by a cooperator shall be developed in accordance with...

  18. 7 CFR 550.16 - Project development.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 6 2013-01-01 2013-01-01 false Project development. 550.16 Section 550.16 Agriculture... § 550.16 Project development. REE provides partial funding to Cooperators to support research projects... the REE Agency's ADODR shall jointly develop the following documentation: (a) Project plan. A...

  19. 7 CFR 550.16 - Project development.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 6 2014-01-01 2014-01-01 false Project development. 550.16 Section 550.16 Agriculture... § 550.16 Project development. REE provides partial funding to Cooperators to support research projects... the REE Agency's ADODR shall jointly develop the following documentation: (a) Project plan. A...

  20. Automotive Stirling Engine Development Project

    NASA Technical Reports Server (NTRS)

    Ernst, William D.; Shaltens, Richard K.

    1997-01-01

    The development and verification of automotive Stirling engine (ASE) component and system technology is described as it evolved through two experimental engine designs: the Mod 1 and the Mod 2. Engine operation and performance and endurance test results for the Mod 1 are summarized. Mod 2 engine and component development progress is traced from the original design through hardware development, laboratory test, and vehicle installation. More than 21,000 hr of testing were accomplished, including 4800 hr with vehicles that were driven more dm 59,000 miles. Mod 2 engine dynamometer tests demonstrated that the engine system configuration had accomplished its performance goals for power (60 kW) and efficiency (38.5%) to within a few percent. Tests with the Mod 2 engine installed in a delivery van demonstrated combined metro-highway fuel economy improvements consistent with engine performance goals and the potential for low emission levels. A modified version of the Mod 2 has been identified as a manufacturable design for an ASE. As part of the ASE project, the Industry Test and Evaluation Program (ITEP), NASA Technology Utilization (TU) project, and the industry-funded Stirling Natural Gas Engine program were undertaken to transfer ASE technology to end users. The results of these technology transfer efforts are also summarized.

  1. NASA-DoD Lower Process Temperature Lead-Free Solder Project Overview

    NASA Technical Reports Server (NTRS)

    Kessel, Kurt R.

    2014-01-01

    This project is a follow-on effort to the Joint Council on Aging AircraftJoint Group on Pollution Prevention (JCAAJG-PP) Pb-free Solder Project and NASA-DoD Lead-Free Electronics Project which were the first projects to test the reliability of Pb-free solder joints against the requirements of the aerospace and military community. This effort would continue to build on the results from the JCAAJG-PP Lead-Free Solder Project and NASA-DoD Lead-Free Electronics Project while focusing on a particular failure mechanism currently plaguing Pb-free assemblies, pad cratering.The NASA-DoD Lead-Free Electronics Project confirmed that pad cratering is one of the dominant failure modes that occur in various board level reliability tests, especially under dynamic loading. Pad Cratering is a latent defect that may occur during assembly, rework, and post assembly handling and testing.

  2. Arsenic Removal from Drinking Water by Adsorptive Media, U.S. EPA Demonstration Project at LEADS Head Start Building in Buckeye Lake, OH - Final Performance Evaluation Report

    EPA Science Inventory

    This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project at Licking Economic Action Development Study (LEADS) Head Start School in Buckeye Lake, Ohio. The objectives of the project were to evaluate...

  3. Incremental development and prototyping in current laboratory software development projects: Preliminary analysis

    NASA Technical Reports Server (NTRS)

    Griesel, Martha Ann

    1988-01-01

    Several Laboratory software development projects that followed nonstandard development processes, which were hybrids of incremental development and prototyping, are being studied. Factors in the project environment leading to the decision to use a nonstandard development process and affecting its success are analyzed. A simple characterization of project environment based on this analysis is proposed, together with software development approaches which have been found effective for each category. These approaches include both documentation and review requirements.

  4. Toxic effects of lead on neuronal development and function

    SciTech Connect

    Freedman, R. ); Olson, L. ); Hoffer, B.J. )

    1990-11-01

    The effects of lead on the development of the nervous system are of immediate concern to human health. While it is clear that lead can affect neuronal development at levels of exposure within the range found in the environment, the particular mechanism of the disruption is not readily ascertained. The goal of the authors research is to develop a model system in which the effects of lead on central nervous system development can be demonstrated. To study neuronal development in a system that minimizes such difficulties, the authors have grafted discrete brain regions derived from rat fetuses into the anterior chamber of the eye of adult hosts. The brain pieces continue organotypic development in the eye, but are isolated from possible secondary changes due to alterations in the development of the endocrine and other somatic systems because the adult host has these systems already fully developed. Using this system, they have discovered that lead induces a hypernoradrenergic innervation of central nervous system tissue. The increased innervation is observed not only structurally, but also functionally. Since norepinephrine is an inhibitory neurotransmitter, this ingrowth may explain the profound slowing of discharge of cerebellar neurons recorded in grafts of lead-treated animals. Studies in other tissues suggest that increased axonal ingrowth may be a general problem of lead intoxication that encompasses many brain areas, as well as peripheral sympathetic systems.

  5. Task 4 supporting technology. Part 1: Detailed test plan for leading edge tile development. Leading edge material development and testing

    NASA Technical Reports Server (NTRS)

    Hogenson, P. A.; Staszak, Paul; Hinkle, Karrie

    1995-01-01

    This task develops two alternative candidate tile materials for leading edge applications: coated alumina enhanced thermal barrier (AETB) tile and silicone impregnated reusable ceramic ablator (SIRCA) tile. Upon reentry of the X-33/RLV space vehicle, the leading edges experience the highest heating rates and temperatures. The wing leading edge and nose cap experience peak temperatures in the range 2000 to 2700 F. Replacing reinforced carbon-carbon (RCC) with tile-based thermal protection system (TPS) materials is the primary objective. Weight, complexity, coating impact damage, and repairability are among the problems that this tile technology development addresses. The following subtasks will be performed in this development effort: tile coating development; SIRCA tile development; robustness testing of tiles; tile repair development; tile operations/processing; tile leading edge configuration; and life cycle testing.

  6. Task 4 supporting technology. Part 1: Detailed test plan for leading edge tile development. Leading edge material development and testing

    NASA Astrophysics Data System (ADS)

    Hogenson, P. A.; Staszak, Paul; Hinkle, Karrie

    1995-05-01

    This task develops two alternative candidate tile materials for leading edge applications: coated alumina enhanced thermal barrier (AETB) tile and silicone impregnated reusable ceramic ablator (SIRCA) tile. Upon reentry of the X-33/RLV space vehicle, the leading edges experience the highest heating rates and temperatures. The wing leading edge and nose cap experience peak temperatures in the range 2000 to 2700 F. Replacing reinforced carbon-carbon (RCC) with tile-based thermal protection system (TPS) materials is the primary objective. Weight, complexity, coating impact damage, and repairability are among the problems that this tile technology development addresses. The following subtasks will be performed in this development effort: tile coating development; SIRCA tile development; robustness testing of tiles; tile repair development; tile operations/processing; tile leading edge configuration; and life cycle testing.

  7. Conceptualizing the Work of Leading Mathematical Tasks in Professional Development

    ERIC Educational Resources Information Center

    Elliott, Rebekah; Kazemi, Elham; Lesseig, Kristin; Mumme, Judith; Carroll, Cathy; Kelley-Petersen, Megan

    2009-01-01

    Filling the knowledge gap in the limited research on professional development leaders is an urgent issue if teacher learning is to be improved. This research and development project is studying how leaders learn to cultivate mathematically rich professional development environments. The authors adapted two frameworks from classroom-based…

  8. A Career Development Model for Project Management Workforces.

    ERIC Educational Resources Information Center

    Duarte, Deborah; And Others

    1995-01-01

    Interviews with project managers (n=50) and lower-level managers (n=100) at NASA identified career paths and job requirements for project management in technical occupations. The necessary skills and actions for developing them were recommended for four career stages: getting established, independent contributor, technical lead/manager, and…

  9. 75 FR 22674 - Moynihan Station Development Project

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-29

    ... Quality NEPA implementing regulations, 40 CFR parts 1500-1508, and the FRA NEPA procedures, 64 FR 28545... Federal Railroad Administration Moynihan Station Development Project AGENCY: Federal Railroad... comment period for the Moynihan Station Development Project Environmental Assessment. SUMMARY: The...

  10. Development of 3kA conduction cooled HTS current lead system

    NASA Astrophysics Data System (ADS)

    Ohsemochi, Koichi; Ono, Michitaka; Nomura, Shunji; Kuriyama, Toru; Kasahara, Hirofumi; Akita, Shirabe; Koso, Seiichi

    2003-10-01

    The research and development of superconducting magnet energy storage (SMES) system, a national project, began in 1999. One of the purposes of this project is investigation concerning the application of high-temperature superconducting (HTS) SMES. As a part of this project, the 3 kA class HTS small model coil was manufactured in order to verify the possibility of realizing conduction cooled HTS SMES. Therefore, it is important to develop the conduction cooled current lead system for applying this coil. We developed a kA class conduction cooled HTS current lead system. This current lead system consists of the copper current lead and the YBaCuO (YBCO) HTS current lead. The YBCO bulk manufactured by Nippon Steel Corporation was applied to the HTS current lead. The YBCO bulk keeps high critical current density ( Jc > 10,000 A/cm 2) in the magnetic field (1 T) at 77 K compared with Bi2223 superconductor. The experiment of this HTS current lead system was carried out, and rated current of 3000 A was achieved successfully.

  11. Agricultural Energy Curriculum Development Project. Research and Development Project in Career Education, Vocational. Final Project.

    ERIC Educational Resources Information Center

    Wacholz, Marlin

    A project was conducted to develop energy instructional units which would fit into each year of a three-year farm business management curriculum. Four curriculum units which focus on fertilizer management in crop production were developed. The first unit was designed to develop farmers' awareness of energy as a vital resource to their businesses…

  12. Recent developments in lead-acid battery technology in Japan

    SciTech Connect

    Shimizu, K.

    1987-12-01

    Japan ranks second to the US in the free world in battery manufacturing. This is a result of the rapid growth in production volume resulting from quick acceleration of equipment investment and manpower reduction to meet the market demand. It has also gotten closer to the development activities to open new markets for battery applications, since the lead-acid battery industry has been bolstered and has benefited from the explosion in demand and production within recent years. Keeping pace with a wide diversity of customized requirements, a demanding schedule has been started in order to promote high-energy-density lead-acid battery development. This article reviews the battery situation in Japan in sections devoted to the following: automotive lead-acid batteries; industrial lead-acid batteries; electric-vehicle batteries; and load-leveling batteries. 9 references, 7 figures, 10 tables.

  13. The Challenges of Developing Research Resources for Leading Vietnamese Universities

    ERIC Educational Resources Information Center

    Nguyen, Thi Lan Huong

    2013-01-01

    This paper examines the challenges of developing research resources for leading Vietnamese universities. The first part of the paper presents the background to the study, including literature review on the challenges to research resources development, and describes the research questions and research methods. The next part provides empirical…

  14. Peso Bilingual Language Development Project. Project Evaluation, June 30, 1970.

    ERIC Educational Resources Information Center

    Peso Education Service Center Region 16, Amarillo, TX.

    The "PESO" Bilingual Language Development Project was a 1-year pilot study in 4 West Texas county school districts involving 451 Anglo and Mexican American 1st- and 2nd-grade students. The project contained 3 components: (1) the development of bilingual oral and written language skills--instruction in the Spanish language, and the concomitant…

  15. Development and validation of a lead emission inventory for the Greater Cairo area

    PubMed Central

    Safar, Zeinab; Labib, Mounir W.; Gertler, Alan W.

    2013-01-01

    Studies that investigate the environmental health risks to Cairo residents invariably conclude that lead is one of the area’s major health hazards. The Cairo Air Improvement Project (CAIP), which was implemented by a team led by Chemonics International, funded by USAID in partnership with the Egyptian Environmental Affairs Agency (EEAA), started developing a lead emission inventory for the greater Cairo (GC) area in 1998. The inventory contains a list by major source of the annual lead emissions in the GC area. Uses of the inventory and associated database include developing effective regulatory and control strategies, assessing emissions trends, and conducting modeling exercises. This paper describes the development of the current lead emissions inventory (1999–2010), along with an approach to develop site specific emission factors and measurements to validate the inventory. This paper discusses the major sources of lead in the GC area, which include lead smelters, Mazout (heavy fuel oil) combustion, lead manufacturing batteries factories, copper foundries, and cement factories. Included will be the trend in the lead emissions inventory with regard to the production capacity of each source category. In addition, the lead ambient measurements from 1999 through 2010 are described and compared with the results of Source Attribution Studies (SAS) conducted in 1999, 2002, and 2010. Due to EEAA/CAIP efforts, a remarkable decrease in more than 90% in lead emissions was attained for 2007. PMID:25685523

  16. 7 CFR 550.16 - Project development.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... § 550.16 Project development. REE provides partial funding to Cooperators to support research projects... 7 Agriculture 6 2012-01-01 2012-01-01 false Project development. 550.16 Section 550.16 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL RESEARCH SERVICE, DEPARTMENT...

  17. 23 CFR 660.112 - Project development.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 23 Highways 1 2011-04-01 2011-04-01 false Project development. 660.112 Section 660.112 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS SPECIAL PROGRAMS (DIRECT FEDERAL) Forest Highways § 660.112 Project development. (a) Projects to be administered...

  18. The Wisconsin Rural Development Demonstration Project.

    ERIC Educational Resources Information Center

    McCoy, Palmer E.; Jones, Eleanor

    Nineteen Wisconsin counties were the site of the four-year Rural Development Demonstration Project, one of five such projects in the nation. Among the project's objectives were to accelerate sound economic, social, cultural and environmental development and to provide alternatives for living in non-metropolitan areas while providing greater…

  19. And a Child Shall Lead Them: Learning Lives in the Project Hallways of Puerto Rico.

    ERIC Educational Resources Information Center

    Nesmith, Caryn

    2001-01-01

    Describes how Puerto Rico's teenage tutor, Jorge Aneudy Villalba, leads a children's learning crusade through an urban desert of poverty and despair, determined to prove the kids from the projects can make their own future. (Author/EV)

  20. Development of alternatives to lead-bearing solders

    SciTech Connect

    Vianco, P.T.

    1993-07-01

    Soldering technology, using tin-lead alloys has had a significant role in the packaging of highly functional, low cost electronic devices. The elimination of lead from all manufactured products, whether through legislation or tax incentives, will impact the electronics community which uses lead-containing solders. In response to these proposed measures, the National Center for Manufacturing Sciences has established a multi-year program involving participants from industry, academia, and the national laboratories with the objective to identify potential replacements for lead-bearing solders. Selection of candidate alloys is based upon the analysis of materials properties, manufacturability, modeling codes for reliability prediction, as well as toxicological properties and resource availability, data developed in the program.

  1. How Does a Project Manager's Level of Development Influence Conceptualizations of Project Management and the Project Development Environment?

    ERIC Educational Resources Information Center

    Lynch, Margaret M.

    2013-01-01

    This study explores the meaning project managers (PMs) make of their project environment, how they lead their teams and have incorporate complexity into their project management approach. The exploration of the PM's developmental level and meaning making offers a different angle on the project management and leadership literature. The study…

  2. Leading, Leadership, and Learning: Exploring New Contexts for Leadership Development in Emerging School Environments

    ERIC Educational Resources Information Center

    Burke, Wendy; Marx, Gary E.; Lowenstein, Ethan

    2012-01-01

    Within the context of a pilot leadership seminar, this participatory action research project explores how to effectively lead in turbulent learning environments regulated by federal policy that mandates high levels of student achievement coupled with a rigorous standards-based reform movement. Our analysis indicates: (a) adult development is a…

  3. Neonatal lead exposure impairs development of rodent barrel field cortex

    PubMed Central

    Wilson, Mary Ann; Johnston, Michael V.; Goldstein, Gary W.; Blue, Mary E.

    2000-01-01

    Childhood exposure to low-level lead can permanently reduce intelligence, but the neurobiologic mechanism for this effect is unknown. We examined the impact of lead exposure on the development of cortical columns, using the rodent barrel field as a model. In all areas of mammalian neocortex, cortical columns constitute a fundamental structural unit subserving information processing. Barrel field cortex contains columnar processing units with distinct clusters of layer IV neurons that receive sensory input from individual whiskers. In this study, rat pups were exposed to 0, 0.2, 1, 1.5, or 2 g/liter lead acetate in their dam's drinking water from birth through postnatal day 10. This treatment, which coincides with the development of segregated columns in the barrel field, produced blood lead concentrations from 1 to 31 μg/dl. On postnatal day 10, the area of the barrel field and of individual barrels was measured. A dose-related reduction in barrel field area was observed (Pearson correlation = −0.740; P < 0.001); mean barrel field area in the highest exposure group was decreased 12% versus controls. Individual barrels in the physiologically more active caudoventral group were affected preferentially. Total cortical area measured in the same sections was not altered significantly by lead exposure. These data support the hypothesis that lead exposure may impair the development of columnar processing units in immature neocortex. We demonstrate that low levels of blood lead, in the range seen in many impoverished inner-city children, cause structural alterations in a neocortical somatosensory map. PMID:10805810

  4. How to Grow Project Scientists: A Systematic Approach to Developing Project Scientists

    NASA Technical Reports Server (NTRS)

    Kea, Howard

    2011-01-01

    The Project Manager is one of the key individuals that can determine the success or failure of a project. NASA is fully committed to the training and development of Project Managers across the agency to ensure that highly capable individuals are equipped with the competencies and experience to successfully lead a project. An equally critical position is that of the Project Scientist. The Project Scientist provides the scientific leadership necessary for the scientific success of a project by insuring that the mission meets or exceeds the scientific requirements. Traditionally, NASA Goddard project scientists were appointed and approved by the Center Science Director based on their knowledge, experience, and other qualifications. However the process to obtain the necessary knowledge, skills and abilities was not documented or done in a systematic way. NASA Goddard's current Science Director, Nicholas White saw the need to create a pipeline for developing new projects scientists, and appointed a team to develop a process for training potential project scientists. The team members were Dr. Harley Thronson, Chair, Dr. Howard Kea, Mr. Mark Goldman, DACUM facilitator and the late Dr. Michael VanSteenberg. The DACUM process, an occupational analysis and evaluation system, was used to produce a picture of the project scientist's duties, tasks, knowledge, and skills. The output resulted in a 3-Day introductory course detailing all the required knowledge, skills and abilities a scientist must develop over time to be qualified for selections as a Project Scientist.

  5. Including a Service Learning Educational Research Project in a Biology Course-I: Assessing Community Awareness of Childhood Lead Poisoning

    ERIC Educational Resources Information Center

    Abu-Shakra, Amal; Saliim, Eric

    2012-01-01

    A university course project was developed and implemented in a biology course, focusing on environmental problems, to assess community awareness of childhood lead poisoning. A set of 385 questionnaires was generated and distributed in an urban community in North Carolina, USA. The completed questionnaires were sorted first into yes and no sets…

  6. Surviving the Lead Reliability Engineer Role in High Unit Value Projects

    NASA Technical Reports Server (NTRS)

    Perez, Reinaldo J.

    2011-01-01

    A project with a very high unit value within a company is defined as a project where a) the project constitutes one of a kind (or two-of-a-kind) national asset type of project, b) very large cost, and c) a mission failure would be a very public event that will hurt the company's image. The Lead Reliability engineer in a high visibility project is by default involved in all phases of the project, from conceptual design to manufacture and testing. This paper explores a series of lessons learned, over a period of ten years of practical industrial experience by a Lead Reliability Engineer. We expand on the concepts outlined by these lessons learned via examples. The lessons learned are applicable to all industries.

  7. Project Probes Digital Media's Effect on Ethics: Howard Gardner Leads Team Studying Youths' Web Norms

    ERIC Educational Resources Information Center

    Viadero, Debra

    2008-01-01

    Noted Harvard psychologist Howard Gardner is leading a team studying the social and ethical norms of young people on the Web. Known as the "GoodPlay Project," the study is being financed with a grant from the Chicago-based Catherine T. MacArthur Foundation. What researchers hope to do through the project is fill a gap in the burgeoning research…

  8. Glass composition development for stabilization of lead based paints

    SciTech Connect

    Marra, J.C.

    1996-10-01

    Exposure to lead can lead to adverse health affects including permanent damage to the central nervous system. Common means of exposure to lead are from ingestion of lead paint chips or breathing of dust from deteriorating painted surfaces. The U.S. Army has over 101 million square feet of buildings dating to World War II or earlier. Many of these structures were built before the 1978 ban on lead based paints. The U.S. Army Corps of Engineers CERL is developing technologies to remove and stabilize lead containing organic coatings. Promising results have been achieved using a patented flame spray process that utilizes a glass frit to stabilize the hazardous constituents. When the glass frit is sprayed onto the paint containing substrate, differences in thermal expansion coefficients between the frit and the paint results in spalling of the paint from the substrate surface. The removed fragments are then collected and remelted to stabilize the hazardous constituents and allow for disposal as non-hazardous waste. Similar successful results using a patented process involving microwave technology for paint removal have also been achieved. In this process, the painted surface is coated with a microwave coupling compound that when exposed to microwave energy results in the spalling of the hazardous paint from the surface. The fragments can again be accumulated and remelted for stabilization and disposal.

  9. Progress and challenges in bipolar lead-acid battery development

    NASA Astrophysics Data System (ADS)

    Bullock, Kathryn R.

    1995-05-01

    Bipolar lead-acid batteries have higher power densities than any other aqueous battery system. Predicted specific powers based on models and prototypes range from 800 kW/kg for 100 ms discharge times to 1.6 kW/kg for 10 s. A 48 V automotive bipolar battery could have 2 1/2 times the cold cranking rate of a monopolar 12 V design in the same size. Problems which have precluded the development of commercial bipolar designs include the instability of substrate materials and enhanced side reactions. Design approaches include pseudo-bipolar configurations, as well as true bipolar designs in planar and tubular configurations. Substrate materials used include lead and lead alloys, carbons, conductive ceramics, and tin-oxide-coated glass fibers. These approaches are reviewed and evaluated.

  10. Recent advances in lead-acid cell research and development

    SciTech Connect

    Voss, E.

    1980-01-01

    During the last decade it was demonstate that the lead-acid system is capable of proving an attractive energy source of sufficient energy and power per unit weight and volume which allows its sucessful application for electric vehicle propulsion. This is shown by a number of typical examples, such as the relationship between active material properties and capacity at high rates of discharge the effect of acid stratification and others. Simultaneously, the expenditure for the maintenance of lead-acid batteries was minimized by the development of peripheric equipment, as there are means for central-automatic water refill and recombination devices. It is shown that there is still a considerable potential for further improvement which might again strengthen the unique position of the lead-acid system in the market in comparison to competitive systems.

  11. Development of forced flow cooled current leads for fusion magnets

    NASA Astrophysics Data System (ADS)

    Heller, R.; Fink, S.; Friesinger, G.; Kienzler, A.; Lingor, A.; Schleinkofer, G.; Süßer, M.; Ulbricht, A.; Wüchner, F.; Zahn, G.

    2001-03-01

    During the past 15 years, the Institut für Technische Physik of the Forschungszentrum Karlsruhe, Germany, has developed current leads cooled by forced-flow supercritical helium in the current range from 20 to 80 kA. The design is based on a separation of the current carrying part and the heat exchanger part as well as the presence of the so-called superconductor inserts made of Nb 3Sn wires inside the conductor in the heat exchanger area which allows the operation of the current lead at minimum helium mass flow in a wide current range. The paper describes the design and construction of the current leads as well as operation results obtained during various tests performed in the coil test facility TOSKA at the Forschungszentrum Karlsruhe.

  12. Study of lead absorption and its effect on children's development

    SciTech Connect

    Wang, L.; Xu, S.E.; Zhang, G.D.; Wang, W.Y. )

    1989-12-01

    Blood lead levels of 180 pupils from two elementary schools were determined and the intellectual development of the children was followed. The children in these two groups were similar in most nonlead variables. Results showed that pupils at the school near a battery plant had higher blood lead levels than those at a school in a residential neighborhood. An evident dose-effect relationship between blood lead level and children's performance on psychological testing existed: the higher the blood level, the lower the intelligence quotient. This relationship remained after confounding factors were controlled by stepwise regression analysis. Partial regression coefficients for PbB and verbal IQ, performance IQ, and full-scale IQ were -0.85, -0.71, and -0.91, respectively.

  13. Lead salt TE-cooled imaging sensor development

    NASA Astrophysics Data System (ADS)

    Green, Kenton; Yoo, Sung-Shik; Kauffman, Christopher

    2014-06-01

    Progress on development of lead-salt thermoelectrically-cooled (TE-cooled) imaging sensors will be presented. The imaging sensor architecture has been integrated into field-ruggedized hardware, and supports the use of lead-salt based detector material, including lead selenide and lead sulfide. Images and video are from a lead selenide focal plane array on silicon ROIC at temperatures approaching room temperature, and at high frame rates. Lead-salt imagers uniquely possess three traits: (1) Sensitive operation at high temperatures above the typical `cooled' sensor maximum (2) Photonic response which enables high frame rates faster than the bolometric, thermal response time (3) Capability to reliably fabricate 2D arrays from solution-deposition directly, i. e. monolithically, on silicon. These lead-salt imagers are less expensive to produce and operate compared to other IR imagers based on II-VI HgCdTe and III-V InGaAsSb, because they do not require UHV epitaxial growth nor hybrid assembly, and no cryo-engine is needed to maintain low thermal noise. Historically, there have been challenges with lead-salt detector-to-detector non-uniformities and detector noise. Staring arrays of lead-salt imagers are promising today because of advances in ROIC technology and fabrication improvements. Non-uniformities have been addressed by on-FPA non-uniformity correction and 1/f noise has been mitigated with adjustable noise filtering without mechanical chopping. Finally, improved deposition process and measurement controls have enabled reliable fabrication of high-performance, lead-salt, large format staring arrays on the surface of large silicon ROIC wafers. The imaging array performance has achieved a Noise Equivalent Temperature Difference (NETD) of 30 mK at 2.5 millisecond integration time with an f/1 lens in the 3-5 μm wavelength band using a two-stage TE cooler to operate the FPA at 230 K. Operability of 99.6% is reproducible on 240 × 320 format arrays.

  14. Development of Risk Uncertainty Factors from Historical NASA Projects

    NASA Technical Reports Server (NTRS)

    Amer, Tahani R.

    2011-01-01

    NASA is a good investment of federal funds and strives to provide the best value to the nation. NASA has consistently budgeted to unrealistic cost estimates, which are evident in the cost growth in many of its programs. In this investigation, NASA has been using available uncertainty factors from the Aerospace Corporation, Air Force, and Booz Allen Hamilton to develop projects risk posture. NASA has no insight into the developmental of these factors and, as demonstrated here, this can lead to unrealistic risks in many NASA Programs and projects (P/p). The primary contribution of this project is the development of NASA missions uncertainty factors, from actual historical NASA projects, to aid cost-estimating as well as for independent reviews which provide NASA senior management with information and analysis to determine the appropriate decision regarding P/p. In general terms, this research project advances programmatic analysis for NASA projects.

  15. Recent advances in lead-acid cell research and development

    SciTech Connect

    Voss, E.

    1980-01-01

    The lead-acid battery still is and will be for the foreseeable future the most widely used secondary energy storage system. It will maintain this predominant role because of its highly developed technology, its low costs as compared to other secondary systems and its high reliability. During the last decade it has been demonstrated that the lead-acid system is capable of providing an attractive energy source of sufficient energy and power per unit weight and volume which allows its successful application for electric vehicle propulsion. Basic research has contributed in a worldwide effort to the improvement of active material utilization and cycle life as well. This is shown by a number of typical examples, such as the relationship between active material properties and capacity at high rates of discharge, the effect of acid stratification and others. Simultaneously, the expenditure for the maintenance of lead-acid batteries has been minimized by the development of peripheric equipment, as there are means for central-automatic water refill and recombination devices. It is shown that there is still a considerable potential for further improvement which might again strengthen the unique position of the lead-acid system in the market in comparison to competitive systems.

  16. Lead sulfide - Silicon MOSFET infrared focal plane development

    NASA Technical Reports Server (NTRS)

    Barrett, J. R.; Jhabvala, M. D.

    1983-01-01

    A process for directly integrating photoconductive lead sulfide (PbS) infrared detector material with silicon MOS integrated circuits has been developed primarily for application in long (greater than 10,000 detector elements) linear arrays for pushbroom scanning applications. The processing technology is based on the conventional PMOS and CMOS technologies with a variation in the metallization. Results and measurements on a fully integrated eight-element multiplexer are shown.

  17. Development of Advanced High Lift Leading Edge Technology for Laminar Flow Wings

    NASA Technical Reports Server (NTRS)

    Bright, Michelle M.; Korntheuer, Andrea; Komadina, Steve; Lin, John C.

    2013-01-01

    This paper describes the Advanced High Lift Leading Edge (AHLLE) task performed by Northrop Grumman Systems Corporation, Aerospace Systems (NGAS) for the NASA Subsonic Fixed Wing project in an effort to develop enabling high-lift technology for laminar flow wings. Based on a known laminar cruise airfoil that incorporated an NGAS-developed integrated slot design, this effort involved using Computational Fluid Dynamics (CFD) analysis and quality function deployment (QFD) analysis on several leading edge concepts, and subsequently down-selected to two blown leading-edge concepts for testing. A 7-foot-span AHLLE airfoil model was designed and fabricated at NGAS and then tested at the NGAS 7 x 10 Low Speed Wind Tunnel in Hawthorne, CA. The model configurations tested included: baseline, deflected trailing edge, blown deflected trailing edge, blown leading edge, morphed leading edge, and blown/morphed leading edge. A successful demonstration of high lift leading edge technology was achieved, and the target goals for improved lift were exceeded by 30% with a maximum section lift coefficient (Cl) of 5.2. Maximum incremental section lift coefficients ( Cl) of 3.5 and 3.1 were achieved for a blown drooped (morphed) leading edge concept and a non-drooped leading edge blowing concept, respectively. The most effective AHLLE design yielded an estimated 94% lift improvement over the conventional high lift Krueger flap configurations while providing laminar flow capability on the cruise configuration.

  18. VTAE Economic Development Project. Final Report.

    ERIC Educational Resources Information Center

    Klitzke, Elizabeth

    A project was undertaken to redefine the role of vocational, technical, and adult education (VTAE) in economic development in Wisconsin. Included among the objectives of the project were the following: to produce a statewide plan for economic development identifying new linkages among business, industry, labor, and the VTAE system; to develop…

  19. 7 CFR 550.16 - Project development.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 6 2011-01-01 2011-01-01 false Project development. 550.16 Section 550.16 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL RESEARCH SERVICE, DEPARTMENT OF... § 550.16 Project development. REE provides partial funding to Cooperators to support research...

  20. Project-Based Learning for Sustainable Development

    ERIC Educational Resources Information Center

    Nation, Marcia L.

    2008-01-01

    Project-based learning is a pedagogy that involves students in applying and developing theories, skills, and techniques to solve real world problems. Three faculty members used project-based learning to involve graduate students in an interdisciplinary seminar on sustainable development in Appalachian Ohio, which was convened under the auspices of…

  1. Project Development Specification for Special Protective Coating

    SciTech Connect

    MCGREW, D.L.

    2000-09-28

    Establishes the performance, design development, and test requirements for the Special Protective Coating. The system engineering approach was used to develop this document in accordance with the guidelines laid out in the Systems Engineering Management Plan for Project W-314.

  2. Where Will LEAD Lead?

    ERIC Educational Resources Information Center

    Wildman, Louis

    After setting forth eight assumptions concerning the education of educational administrators, findings about the Leadership in Educational Administration Development (LEAD) program are discussed. The analysis is based on the first-year applications, telephone conversations with staff at a majority of the project sites, and additional material…

  3. Time frames for geothermal project development

    SciTech Connect

    McClain, David W.

    2001-04-17

    Geothermal development can generally be broken down into distinct phases: Exploration and Leasing; Project Development And Feasibility Studies; Well Field Development; Project Finance, Construction and Start-up Operations; and Commercial Operations. Each phase represents different levels of cost and risk and different types of management teams that are needed to assess and manage the project and associated risk. Orderly transitions of management at each major phase are needed. Exploration programs are largely science based, the primary focus of the science based investigations should be to: secure the lease position, and develop sufficient information to identify and characterize an economical geothermal resource. Project development specialists build on the exploration data to: pull together a project design, develop a detailed cost estimate; prepare an environmental assessment; and collect all data needed for project financing. Construction specialist build from the development phase to: develop detailed engineering, procure equipment and materials, schedule and manage the facilities construction programs, and start and test the power plant. Operations specialists take over from construction during start-up and are responsible for sustainable and reliable operations of the resource and power generation equipment over the life of the project.

  4. Lead in ancient human bones and its relevance to historical developments of social problems with lead.

    PubMed

    Patterson, C C; Shirahata, H; Ericson, J E

    1987-03-01

    Concentrations of metabolic lead in buried ancient bones are obscured by replacement of calcium in apatite by excessive amounts of soil moisture Pb. Concentrations of metabolic barium in bones are affected in a similar way. Added soil Pb and Ba, expressed as log(Pb/Ca) versus log(Ba/Ca) among various bones at a given burial site, are positively covariant, with about 5-fold more soil Pb added for each unit of added soil Ba. The typical natural metabolic Ba/Ca ratio in contemporary people can be measured unambiguously because it as unaffected by industrial pollution. It applies to ancient people because it has not changed historically. The intercept of the covariance curve for buried bones of a given ancient population at the known metabolic Ba/Ca ratio indexes the corresponding metabolic Pb/Ca ratio in bones of that population. Lead levels which prevailed in Romans appear to have been similar to those in contemporary people, which are approximately 1000-fold above natural levels in humans determined by this method in ancient Peruvians. This indicates that studies of natural biochemical reactions in cells free of industrial Pb should be made, because most present biochemical knowledge is founded on data obtained from systems polluted with Pb 1000 to 100000-fold above natural levels. The 5000 year history of smelting Pb by humans indicates that a system of education fostered by genetically common lower brain center functions operated on hundreds of successive generations in a context of cultural changes invoked by feedback from developments in engineering technologies to give rise to the difference between present typical and prehistoric natural levels of Pb in humans. Archaeological and anthropological studies of early developments in writing, music and metallurgy by ancient Peruvians and Persian peoples should be combined with PET-scan studies of their descendants to discover if, as preliminary archaeological data suggest, the two ancient populations differed on a

  5. Computer Literacy Development. A Project Report.

    ERIC Educational Resources Information Center

    Kapp, Ann B.; Knickerbocker, Addie H.

    The Computer Literacy Development Project in Research and Training in Vocational Education was a multi-phased project designed to determine the feasibility of changing the attitudes of vocational educators toward the use of computers, to identify the classroom and administrative applications of microcomputers, to determine the applications of…

  6. Principal Development: Self-Directed Project Efficacy

    ERIC Educational Resources Information Center

    Piggot-Irvine, Eileen

    2011-01-01

    The inclusion of self-directed projects as an element within a New Zealand principal development programme was designed to reflect increasing support internationally for such a context-specific "inquiry" approach. The results reported in this article suggest that considerable clarity is required for such projects if they are to realize the…

  7. Our Social Service Projects and Their Development.

    ERIC Educational Resources Information Center

    Pakistan Girl Guides Association, Lahore.

    The Pakistan Girl Guides Association has participated and continues to participate in a number of social service projects. These projects include community development work, in which the Guides assisted in encouraging girls and women to participate in community work. The association also participated in the Associated Youth Enterprise of UNESCO,…

  8. Session: Wind industry project development

    SciTech Connect

    Gray, Tom; Enfield, Sam

    2004-09-01

    This first session at the Wind Energy and Birds/Bats workshop consisted of two presentations followed by a question and answer period. The session was intended to provide a general overview of wind energy product development, from the industry's perspective. Tom Gray of AWEA presented a paper titled ''State of the Wind Energy Industry in 2004'', highlighting improved performance and lower cost, efforts to address avian impacts, a status of wind energy in comparison to other energy-producing sources, and ending on expectations for the near future. Sam Enfield of Atlantic Renewable Energy Corporation presented a paper titled ''Key Factors for Consideration in Wind Plant Siting'', highlighting factors that wind facility developers must consider when choosing a site to build wind turbines and associated structures. Factors covered include wind resources available, ownership and land use patterns, access to transmission lines, accessibility and environmental impacts. The question and answer sum mary included topics related to risk taking, research and development, regulatory requirements, and dealing with utilities.

  9. Barriers to the Implementation of Project Lead the Way as Perceived by Indiana High School Principals

    ERIC Educational Resources Information Center

    Shields, C. J.

    2007-01-01

    Technology education (TE) has come to encompass many facets of curriculum, ranging from industrial arts (IA) to integrating problem-solving and engineering concepts into the curriculum. For technology educators who have chosen the pre-engineering problem-solving route there is a pre-engineering curriculum called Project Lead The Way (PLTW), that…

  10. The Financing of Media Projects for Development.

    ERIC Educational Resources Information Center

    Spain, Peter L.

    1978-01-01

    Discusses the financing of Third World media projects that are designed for development, and reports on five main sources of funding--government sources, international agencies, advertising sales, private local support, and self-support. (Author/JEG)

  11. Yield model development project implementation plan

    NASA Technical Reports Server (NTRS)

    Ambroziak, R. A.

    1982-01-01

    Tasks remaining to be completed are summarized for the following major project elements: (1) evaluation of crop yield models; (2) crop yield model research and development; (3) data acquisition processing, and storage; (4) related yield research: defining spectral and/or remote sensing data requirements; developing input for driving and testing crop growth/yield models; real time testing of wheat plant process models) and (5) project management and support.

  12. Technology Developed In Two Space Projects

    NASA Technical Reports Server (NTRS)

    Joseph, Carlton H.

    1988-01-01

    Two projects examined for their influences on commercial products and future space missions. Three-volume report presents study of technological benefits of two spaceflight projects, Galileo, and Hubble space telescope. Study focused on equipment and computer programs developed between initial approval of projects and integration and testing of the systems. Volume 1 presents overview of study, discusses methods of collection and evaluation of data, and offers conclusion and recommendations. Volume 2 describes interview process and summarizes raw data. Volume 3 contains technology-assessment sheets for developments.

  13. Photovoltaic concentrator technology development project. Sixth project integration meeting

    SciTech Connect

    1980-10-01

    Thirty-three abstracts and short papers are presented which describe the current status of research, development, and demonstration of concentrator solar cell technology. Solar concentrators discussed include the parabolic trough, linear focus Fresnel lens, point focus Fresnel lens, and the parabolic dish. Solar cells studied include silicon, GaAs, and AlGaAs. Research on multiple junction cells, combined photovoltaic/thermal collectors, back contact solar cells, and beam splitter modules is described. Concentrator solar cell demonstration programs are reported. Contractor status summaries are given for 33 US DOE concentrator solar cell contracts; a description of the project, project status, and key results to date is included. (WHK)

  14. Research and development for improved lead-salt diode lasers

    NASA Technical Reports Server (NTRS)

    Butler, J. F.

    1976-01-01

    A substantial increase in output power levels for lead-salt diode lasers, through the development of improved fabrication methods, as demonstrated. The goal of 1 mW of CW, single-mode, single-ended power output, was achieved, with exceptional devices exhibiting values greater than 8 mW. It was found that the current tuning rate could be controlled by adjusting the p-n junction depth, allowing the tuning rate to be optimized for particular applications. An unexpected phenomenon was encountered when crystal composition was observed to be significantly altered by annealing at temperatures as low as 600 C; the composition was changed by transport of material through the vapor phase. This effect caused problems in obtaining diode lasers with the desired operating characteristics. It was discovered that the present packaging method introduces gross damaging effects in the laser crystal through pressure applied by the C-bend.

  15. Development of a high-performance lead-acid battery for new-generation vehicles

    NASA Astrophysics Data System (ADS)

    Cooper, Allan

    The ultimate objective of this project is to demonstrate that a valve-regulated lead-acid battery of dual-tab design can be successfully substituted for the nickel-metal hydride battery pack in a Honda Insight hybrid electric vehicle. While the realization of the construction of the battery modules, the battery management system and the associated software has been more complex and time-consuming than was originally envisaged, the battery has now been fitted into the vehicle. With the initial system integration work now complete, the project plan is to test the vehicle with its lead-acid battery for up to 50,000 miles over a combination of the high speed, hill and urban circuits at the Millbrook Proving Grounds in the UK, as well as in general road driving. Prior to this, the developmental battery will have new cells fitted because of the uncertain cycling history of the original cells during the prolonged development period.

  16. Adenomatous Polyposis Coli Mutation Leads to Myopia Development in Mice

    PubMed Central

    Li, Jing; Zhu, Zhenzhen; Yang, Wenzhao; Zhou, Xiangtian; An, Jianhong; Huang, Furong; Wang, Qiongsi; Reinach, Peter S.; Li, Wei; Chen, Wensheng; Liu, Zuguo

    2015-01-01

    Myopia incidence in China is rapidly becoming a very serious sight compromising problem in a large segment of the general population. Therefore, delineating the underlying mechanisms leading to myopia will markedly lessen the likelihood of other sight compromising complications. In this regard, there is some evidence that patients afflicted with familial adenomatous polyposis (FAP), havean adenomatous polyposis coli (APC) mutation and a higher incidence of myopia. To clarify this possible association, we determined whether the changes in pertinent biometric and biochemical parameters underlying postnatal refractive error development in APCMin mice are relevant for gaining insight into the pathogenesis of this disease in humans. The refraction and biometrics in APCMin mice and age-matched wild-type (WT) littermates between postnatal days P28 and P84 were examined with eccentric infrared photorefraction (EIR) and customized optical coherence tomography (OCT). Compared with WT littermates, the APCMin mutated mice developed myopia (average -4.64 D) on P84 which was associated with increased vitreous chamber depth (VCD). Furthermore, retinal and scleral changes appear in these mice along with: 1) axial length shortening; 2) increased retinal cell proliferation; 3) and decreased tyrosine hydroxylase (TH) expression, the rate-limiting enzyme of DA synthesis. Scleral collagen fibril diameters became heterogeneous and irregularly organized in the APCMin mice. Western blot analysis showed that scleral alpha-1 type I collagen (col1α1) expression also decreased whereas MMP2 and MMP9 mRNA expression was invariant. These results indicate that defective APC gene function promotes refractive error development. By characterizing in APCMin mice ocular developmental changes, this approach provides novel insight into underlying pathophysiological mechanisms contributing to human myopia development. PMID:26495845

  17. Optimising Impact in Astronomy for Development Projects

    NASA Astrophysics Data System (ADS)

    Grant, Eli

    2015-08-01

    Positive outcomes in the fields of science education and international development are notoriously difficult to achieve. Among the challenges facing projects that use astronomy to improve education and socio-economic development is how to optimise project design in order to achieve the greatest possible benefits. Over the past century, medical scientists along with statisticians and economists have progressed an increasingly sophisticated and scientific approach to designing, testing and improving social intervention and public health education strategies. This talk offers a brief review of the history and current state of `intervention science'. A similar framework is then proposed for astronomy outreach and education projects, with applied examples given of how existing evidence can be used to inform project design, predict and estimate cost-effectiveness, minimise the risk of unintended negative consequences and increase the likelihood of target outcomes being achieved.

  18. An Atmospheric Instrument Development Outreach Project

    NASA Astrophysics Data System (ADS)

    Guerra, David; Cordella, Nick; Bracy, Sue

    2002-04-01

    In an effort to cultivate the interest in atmospheric science of middle school students, we have established a long-term outreach program in which students become active participants in an instrument development study. This project was motivated by the low cost, $20.00, hand-held haze detector (HHHD) developed by Forrest Mims III and the capabilities of the instruments located 5 miles away as part of the Saint Anselm Atmospheric Sensing Experiment (SAASE). The focus of the project, for the past two academic years, has been the development and data collected with two different HHHDs, operated by eighth graders from Mountain View Middle School (MVMS). This data is then compared to the solar irradiance measurements made with SAASE's automated multifilter shadow band radiometer (MFSBR). This type of outreach project not only teaches students about the atmosphere but also the process of instrument development and the creative aspects of science.

  19. Space market model development project, phase 3

    NASA Technical Reports Server (NTRS)

    Bishop, Peter C.; Hamel, Gary P.

    1989-01-01

    The results of a research project investigating information needs for space commercialization is described. The Space Market Model Development Project (SMMDP) was designed to help NASA identify the information needs of the business community and to explore means to meet those needs. The activity of the SMMDP is reviewed and a report of its operation via three sections is presented. The first part contains a brief historical review of the project since inception. The next part reports results of Phase 3, the most recent stage of activity. Finally, overall conclusions and observations based on the SMMDP research results are presented.

  20. VTAE Professional Development Project. Final Report.

    ERIC Educational Resources Information Center

    Strohbusch, Mark; Baldus, Lorayne

    A project was undertaken to coordinate up-to-date staff professional development on a regional or state basis in the state of Wisconsin. An earlier study had recommended more specific information and hiring of a staff development coordinator. The "Coordination of Efforts in the Vocational, Technical, and Adult Education (VTAE) System for Specific…

  1. Lead exposure in US worksites: A literature review and development of an occupational lead exposure database from the published literature

    PubMed Central

    Koh, Dong-Hee; Locke, Sarah J.; Chen, Yu-Cheng; Purdue, Mark P.; Friesen, Melissa C.

    2016-01-01

    Background Retrospective exposure assessment of occupational lead exposure in population-based studies requires historical exposure information from many occupations and industries. Methods We reviewed published US exposure monitoring studies to identify lead exposure measurement data. We developed an occupational lead exposure database from the 175 identified papers containing 1,111 sets of lead concentration summary statistics (21% area air, 47% personal air, 32% blood). We also extracted ancillary exposure-related information, including job, industry, task/location, year collected, sampling strategy, control measures in place, and sampling and analytical methods. Results Measurements were published between 1940 and 2010 and represented 27 2-digit standardized industry classification codes. The majority of the measurements were related to lead-based paint work, joining or cutting metal using heat, primary and secondary metal manufacturing, and lead acid battery manufacturing. Conclusions This database can be used in future statistical analyses to characterize differences in lead exposure across time, jobs, and industries. PMID:25968240

  2. NASA-DoD Lead-Free Electronics Project: Vibration Test

    NASA Technical Reports Server (NTRS)

    Woodrow, Thomas A.

    2010-01-01

    Vibration testing was conducted by Boeing Research and Technology (Seattle) for the NASA-DoD Lead-Free Electronics Solder Project. This project is a follow-on to the Joint Council on Aging Aircraft/Joint Group on Pollution Prevention (JCAA/JG-PP) Lead-Free Solder Project which was the first group to test the reliability of lead-free solder joints against the requirements of the aerospace/miLItary community. Twenty seven test vehicles were subjected to the vibration test conditions (in two batches). The random vibration Power Spectral Density (PSD) input was increased during the test every 60 minutes in an effort to fail as many components as possible within the time allotted for the test. The solder joints on the components were electrically monitored using event detectors and any solder joint failures were recorded on a Labview-based data collection system. The number of test minutes required to fail a given component attached with SnPb solder was then compared to the number of test minutes required to fail the same component attached with lead-free solder. A complete modal analysis was conducted on one test vehicle using a laser vibrometer system which measured velocities, accelerations, and displacements at one . hundred points. The laser vibrometer data was used to determine the frequencies of the major modes of the test vehicle and the shapes of the modes. In addition, laser vibrometer data collected during the vibration test was used to calculate the strains generated by the first mode (using custom software). After completion of the testing, all of the test vehicles were visually inspected and cross sections were made. Broken component leads and other unwanted failure modes were documented.

  3. Development of X-43A Mach 10 Leading Edges

    NASA Technical Reports Server (NTRS)

    Ohlhorst, Craig W.; Glass, David E.; Bruce, Walter E., III; Lindell, Michael C.; Vaughn, Wallace L.; Dirling, R. B., Jr.; Hogenson, P. A.; Nichols, J. M.; Risner, N. W.; Thompson, D. R.

    2005-01-01

    The nose leading edge of the Hyper-X Mach 10 vehicle was orginally anticipated to reach temperatures near 4000 F at the leading-edge stagnation line. A SiC coated carbon/carbon (C/C) leading-edge material will not survive that extreme temperature for even a short duration single flight. To identify a suitable leading edge for the Mach 10 vehicle, arc-jet testing was performed on thirteen leading-edge segments fabricated from different material systems to evaluate their performance in a simulated flight environment. Hf, Zr, Si, and Ir based materials, in most cases as a coating on C/C, were included in the evaluation. Afterwards, MER, Tucson, AZ was selected as the supplier of the flight vehicle leading edges. The nose and the vertical and horizontal tail leading edges were fabricated out of a 3:1 biased high thermal conductivity C/C. The leading edges were coated with a three layer coating comprised of a SiC conversion of the top surface of the C/C, followed by a chemical vapor deposited layer of SiC, followed by a thin chemical vapor deposited layer of HfC. This paper will describe the fabrication of the Mach 10 C/C leading edges and the testing performed to validate performance.

  4. A lead isotope perspective on urban development in ancient Naples.

    PubMed

    Delile, Hugo; Keenan-Jones, Duncan; Blichert-Toft, Janne; Goiran, Jean-Philippe; Arnaud-Godet, Florent; Romano, Paola; Albarède, Francis

    2016-05-31

    The influence of a sophisticated water distribution system on urban development in Roman times is tested against the impact of Vesuvius volcanic activity, in particular the great eruption of AD 79, on all of the ancient cities of the Bay of Naples (Neapolis). Written accounts on urbanization outside of Rome are scarce and the archaeological record sketchy, especially during the tumultuous fifth and sixth centuries AD when Neapolis became the dominant city in the region. Here we show that isotopic ratios of lead measured on a well-dated sedimentary sequence from Neapolis' harbor covering the first six centuries CE have recorded how the AD 79 eruption was followed by a complete overhaul of Neapolis' water supply network. The Pb isotopic signatures of the sediments further reveal that the previously steady growth of Neapolis' water distribution system ceased during the collapse of the fifth century AD, although vital repairs to this critical infrastructure were still carried out in the aftermath of invasions and volcanic eruptions. PMID:27185923

  5. Smoking, infant birthweight and lead burden in developing children

    SciTech Connect

    Lubin, A.H.; Shrock, R.O.; Signs, S.A.; Kasler, J.S.

    1981-06-01

    Ninety women, 29% of pregnant women (n = 309) enrolled in a longitudinal study determining the effects of environmental factors on the infants' subsequent growth and development, were identified as smokers. They were compared with an equal number of women radomly selected from the same investigation who were nonsmokers. Smoking mothers produced significantly lower birthweight infants (p < .005) and also had higher blood lead levels at the third trimester. The progeny of these women were monitored for 2 years and values at 6, 12, 18 and 24 months all demonstrated a trend for the children of smoking mothers to have higher blood Pb levels which was significant (p < .001) at the child's first birthday. In addition FEP, hemoglobins, hematocrits, Fe, TIBC and %Sat were performed at each of these intervals. There was no significant difference between the smoking and nonsmoking groups. We believe that the lack of a similar trend for these biochemical analyses tends to implicate further the role of cigarette smoking and tobacco smoke in producing lower birthweight infants and predisposing those infants to an environmental hazard of undue body Pb burden.

  6. Development of Direct-Use Projects: Preprint

    SciTech Connect

    Lund, J.

    2011-01-01

    A geothermal direct-use project utilizes a natural resource, a flow of geothermal fluid at elevated temperatures, which is capable of providing heat and/or cooling to buildings, greenhouses, aquaculture ponds, and industrial processes. Geothermal utilization requires matching the varied needs of the user and characteristics of the resource in order to development a successful project. Each application is unique; guidelines are provided for the logical steps required to implement a project. Recommended temperature and flows are suggested for spas and pools, space and district heating, greenhouse and aquaculture pond heating, and industrial applications. Guidelines are provided for selecting the necessary equipment for successfully implementing a direct-use project, including downhole pumps, piping, heat exchangers, and heat convectors. Additionally, the relationship between temperature, flow rate, and the use of heat exchangers to provide heat to a space with hot water or hot air is provided for a number of applications, with suggested 'rules of thumb'.

  7. Neuromaturation and Behavior Development: The Case of Childhood Lead Poisoning.

    ERIC Educational Resources Information Center

    Shaheen, Sandra J.

    1984-01-01

    Studies the language and visuo-spatial skills of preschool children with past histories of lead poisoning. Suggests that specific behavioral sequelae exhibited by such children may be predicted by the factor of their age at the time of lead ingestion. (AS)

  8. Childhood Lead Poisoning: Developing Prevention Programs and Mobilizing Resources.

    ERIC Educational Resources Information Center

    Rochow, K. W. James

    The current approach to dealing with childhood lead poisoning has led to repeated diagnoses of poisoning because such children are treated and then returned to their hazardous environments. This handbook describes in detail the program requirements for effective childhood lead poisoning prevention programs at the local level based on the…

  9. The Influence of Lead Exposure and Toxicity to Children's Neurological Development and School Performance.

    ERIC Educational Resources Information Center

    Kimball, Sarah L.

    This report discusses the effects of lead exposure and toxicity on children's cognitive development and school performance and addresses the role of schools in prevention of lead poisoning. Sources of lead exposure include mining, smelting and refining activities, lead paint, leaded gasoline, and industrial emissions. The results of lead poisoning…

  10. NASA Redox system development project status

    NASA Technical Reports Server (NTRS)

    Nice, A. W.

    1981-01-01

    NASA-Redox energy storage systems developed for solar power applications and utility load leveling applications are discussed. The major objective of the project is to establish the technology readiness of Redox energy storage for transfer to industry for product development and commercialization by industry. The approach is to competitively contract to design, build, and test Redox systems progressively from preprototype to prototype multi-kW and megawatt systems and conduct supporting technology advancement tasks. The Redox electrode and membrane are fully adequate for multi-kW solar related applications and the viability of the Redox system technology as demonstrated for multi-kW solar related applications. The status of the NASA Redox Storage System Project is described along with the goals and objectives of the project elements.

  11. Pyramid Project: An Exemplary Staff Development Plan.

    ERIC Educational Resources Information Center

    Ardmore City Schools, OK.

    The Ardmore, Oklahoma, School District developed the 3-year Pyramid Project to implement the following recommendations of the Sid W. Richardson Foundation Study of exemplary programs for high ability students: (1) broaden the process for assessing student abilities, (2) adopt continuous progress and appropriate pacing, (3) cultivate students'…

  12. Developing Context in International Civic Education Projects

    ERIC Educational Resources Information Center

    Craddock, Alden W.

    2007-01-01

    Because of its inherent political nature, projects for developing civic education in emerging democracies have often been criticized for being a tool for hegemonic control by the "West." Much of these suspicions have been pointed at the United States (US) due to the government's policy of supporting educational reform in emerging democracies. Many…

  13. The Computerized Adaptive Testing System Development Project.

    ERIC Educational Resources Information Center

    McBride, James R.; Sympson, J. B.

    The Computerized Adaptive Testing (CAT) project is a joint Armed Services coordinated effort to develop and evaluate a system for automated, adaptive administration of the Armed Services Vocational Aptitude Battery (ASVAB). The CAT is a system for administering personnel tests that differs from conventional test administration in two major…

  14. FELS FOUNDATION PROJECT FOR DEVELOPING YOUTH POTENTIAL.

    ERIC Educational Resources Information Center

    BAIR, ROBERT A.; AND OTHERS

    THE OPERATION OF THE FELS FOUNDATION PROJECT FOR DEVELOPING YOUTH POTENTIAL IN HANFORD, CALIFORNIA, IS DESCRIBED. OF GENERAL CONCERN WAS THE PREPARATION OF CULTURALLY DEPRIVED CHILDREN FOR SCHOOL EXPERIENCES AND FOR FUTURE EMPLOYMENT. A MAJOR GOAL WAS TO IMPROVE THE SELF-IMAGE OF THE CHILDREN AND TO ASSIST THE PARENTS AND CHILDREN IN PROVIDING…

  15. Development of Capstone Project Attitude Scales

    ERIC Educational Resources Information Center

    Bringula, Rex P.

    2015-01-01

    This study attempted to develop valid and reliable Capstone Project Attitude Scales (CPAS). Among the scales reviewed, the Modified Fennema-Shermann Mathematics Attitude Scales was adapted in the construction of the CPAS. Usefulness, Confidence, and Gender View were the three subscales of the CPAS. Four hundred sixty-three students answered the…

  16. Renewable Energy Project Development Assistance (Fact Sheet)

    SciTech Connect

    Not Available

    2013-07-01

    This fact sheet provides information on the Tribes selected to receive assistance from the U.S. Department of Energy Office of Indian Energy 2013 Strategic Technical Assistance Response Team (START) Program, which provides technical expertise to support the development of next-generation energy projects on tribal lands.

  17. Project DIVIDE Instrument Development. Technical Report # 0810

    ERIC Educational Resources Information Center

    Ketterlin-Geller, Leanne; Jung, Eunju; Geller, Josh; Yovanoff, Paul

    2008-01-01

    In this technical report, we describe the development of cognitive diagnostic test items that form the basis of the diagnostic system for Project DIVIDE (Dynamic Instruction Via Individually Designed Environments). The construct underlying the diagnostic test is division of fractions. We include a description of the process we used to identify the…

  18. HOSPITALITY EDUCATION CURRICULUM DEVELOPMENT PROJECT. FINAL REPORT.

    ERIC Educational Resources Information Center

    DOMMER, CAROLYN

    THE PURPOSE OF THE PROJECT WAS TO GAIN INFORMATION USEFUL IN DEVELOPING PROGRAMS FOR PREPARING PERSONS FOR EMPLOYMENT IN OCCUPATIONS INVOLVING HOME ECONOMICS KNOWLEDGE AND SKILLS AND FOR PREPARING TEACHERS. THE INITIAL CURRICULUM IN HOSPITALITY EDUCATION, TRAINING IN TRADE AND PERSONAL SERVICE OCCUPATIONS PROVIDING FOOD, LODGING, AND RECREATION,…

  19. Developing Innovation Through Graduate Team Design Projects

    ERIC Educational Resources Information Center

    Rodenberger, Charles A.

    1972-01-01

    Important points are that invention and innovation are important elements of technological change, that creative engineering and innovation can be encouraged, and that understanding of the innovation process can be taught on an interdisciplinary base. Course involves developing a project to solve one of the important problems in the world today.…

  20. Robotic Lunar Lander Development Project Status

    NASA Technical Reports Server (NTRS)

    Hammond, Monica; Bassler, Julie; Morse, Brian

    2010-01-01

    This slide presentation reviews the status of the development of a robotic lunar lander. The goal of the project is to perform engineering tests and risk reduction activities to support the development of a small lunar lander for lunar surface science. This includes: (1) risk reduction for the flight of the robotic lander, (i.e., testing and analyzing various phase of the project); (2) the incremental development for the design of the robotic lander, which is to demonstrate autonomous, controlled descent and landing on airless bodies, and design of thruster configuration for 1/6th of the gravity of earth; (3) cold gas test article in flight demonstration testing; (4) warm gas testing of the robotic lander design; (5) develop and test landing algorithms; (6) validate the algorithms through analysis and test; and (7) tests of the flight propulsion system.

  1. Effects of lead exposure before pregnancy and dietary calcium during pregnancy on fetal development and lead accumulation.

    PubMed Central

    Han, S; Pfizenmaier, D H; Garcia, E; Eguez, M L; Ling, M; Kemp, F W; Bogden, J D

    2000-01-01

    Millions of women of child-bearing age have substantial bone lead stores due to lead exposure as children. Dietary calcium ingested simultaneously with lead exposure can reduce lead absorption and accumulation. However, the effects of dietary calcium on previously accumulated maternal lead stores and transfer to the fetus have not been investigated. We studied the effects of lead exposure of female rats at an early age on fetal development during a subsequent pregnancy. We gave 5-week-old female Sprague-Dawley rats lead as the acetate in their drinking water for 5 weeks; controls received equimolar sodium acetate. This was followed by a 1-month period without lead exposure before mating. We randomly assigned pregnant rats (n = 39) to diets with a deficient (0.1%) or normal (0.5%) calcium content during pregnancy. A total of 345 pups were delivered alive. Lead-exposed dams and their pups had significantly higher blood lead concentrations than controls, but the concentrations were in the range of those found in many pregnant women. Pups born to dams fed the calcium-deficient diet during pregnancy had higher blood and organ lead concentrations than pups born to dams fed the 0. 5% calcium diet. Pups born to lead-exposed dams had significantly (p<0.0001) lower mean birth weights and birth lengths than controls. There were significant inverse univariate associations between dam or pup organ lead concentrations and birth weight or length. The 0.5% calcium diet did not increase in utero growth. Stepwise regression analysis demonstrated that greater litter size and female sex were significantly associated with reduced pup birth weight and length. However, lead exposure that ended well before pregnancy was significantly (p<0.0001) associated with reduced birth weight and length, even after litter size, pup sex, and dam weight gain during pregnancy were included in the regression analysis. The data demonstrate that an increase in dietary calcium during pregnancy can reduce

  2. Development of ultra high power, valve-regulated lead-acid batteries for industrial applications

    NASA Astrophysics Data System (ADS)

    Soria, M. Luisa; Valenciano, Jesús; Ojeda, Araceli

    There is a recent market trend towards industrial battery powered products that demand occasionally very high discharge rates. This fact is today solved by oversizing the battery or by using more expensive high power nickel-cadmium batteries. Within an EC funded project, ultra high power lead-acid batteries for UPS applications are being developed. The batteries are characterised by a thin electrode design linked to the use of novel separator materials to increase the battery life under floating and deep cycling conditions. Battery performance under different working conditions is presented, in comparison to standard products, and the battery improvements and failure mechanisms are also discussed.

  3. Promoting Positive Youth Development: The Miami Youth Development Project (YDP)

    ERIC Educational Resources Information Center

    Kurtines, William M.; Ferrer-Wreder, Laura; Berman, Steven L.; Lorente, Carolyn Cass; Briones, Ervin; Montgomery, Marilyn J.; Albrecht, Richard; Garcia, Arlen J.; Arrufat, Ondina

    2008-01-01

    The Miami Youth Development Project (YDP) had its beginnings in the early 1990s as a grassroots response to the needs of troubled (multiproblem) young people in the community (Arnett, Kurtines, & Montgomery, 2008, this issue). YDP is an important outcome of efforts to create positive youth development interventions that draw on the strengths of…

  4. Development of a lead-acid battery for a hybrid electric vehicle

    NASA Astrophysics Data System (ADS)

    Cooper, A.

    In September 2000, a project reliable, highly optimized lead-acid battery (RHOLAB) started under the UK Foresight Vehicle Programme with the objective of developing an optimized lead-acid battery solution for hybrid electric vehicles. The work is based on a novel, individual, spirally-wound valve-regulated lead-acid 2 V cell optimized for HEV use and low variability. This cell is being used as a building block for the development of a complete battery pack that is managed at the cell level. Following bench testing, this battery pack is to be thoroughly evaluated by substituting it for the Ni-MH pack in a Honda Insight. The RHOLAB cell is based on the 8 Ah Hawker Cyclon cell which has been modified to have current take-off at both ends—the dual-tab design. In addition, a variant has been produced with modified cell chemistry to help deal with problems that can occur when these valve-regulated lead-acid battery (VRLA) cells operate in a partial-state-of-charge condition. The cells have been cycled to a specially formulated test cycle based on real vehicle data derived from testing the Honda Insight on the various test tracks at the Millbrook Proving Grounds in the UK. These cycling tests have shown that the lead-acid pack can be successfully cycled when subjected to the high current demands from the vehicle, which have been measured at up to 15 C on discharge and 8 C during regenerative recharging, and cycle life is looking very promising under this arduous test regime. Concurrent with this work, battery development has been taking place. It was decided early on to develop the 144 V battery as four 36 V modules. Data collection and control has been built-in and special steps taken to minimize the problems of interconnect in this complex system. Development of the battery modules is now at an advanced stage. The project plan then allows for extensive testing of the vehicle with its lead-acid battery at Millbrook so it can be compared with the benchmark tests which

  5. Projection method and new formulation of leading-order anisotropic hydrodynamics

    NASA Astrophysics Data System (ADS)

    Tinti, Leonardo; Florkowski, Wojciech

    2014-03-01

    The earlier projection method introduced for boost-invariant and cylindrically symmetric systems is used to introduce a new formulation of anisotropic hydrodynamics that allows for three substantially different values of pressure acting locally in three different directions. Our considerations are based on the Boltzmann kinetic equation with the collision term treated in the relaxation-time approximation and the momentum anisotropy is included explicitly in the leading term of the distribution function. A novel feature of our work is the complete analysis of the second moment of the Boltzmann equation, in addition to the zeroth and first moments that have been analyzed in earlier studies. We define the final equations of anisotropic hydrodynamics in the leading order as a subset of the analyzed moment equations (and their linear combinations) which agree with the Israel-Stewart theory in the case of small pressure anisotropies.

  6. Photovoltaic systems development and evaluation projects

    SciTech Connect

    Stevens, J.W.

    1985-02-01

    The Sixth Annual Photovoltaic Systems Development Projects Integrated Meeting was held at the Sheraton Old Town, March 5, 6, and 7, 1985, in Albuquerque, New Mexico. The meeting was sponsored by Sandia National Laboratories and the United States Department of Energy. This document contains abstracts and visual materials used for the presentations as well as current contract summaries. The topics of the presentations covered System Research, Utility Interface, Power Conditioning Development, Array Field Designs, and the Evaluation of Systems Level Experiments. A panel discussion held on the final day focused on the government role in PV system development.

  7. Laminar flow control leading edge glove flight test article development

    NASA Technical Reports Server (NTRS)

    Pearce, W. E.; Mcnay, D. E.; Thelander, J. A.

    1984-01-01

    A laminar flow control (LFC) flight test article was designed and fabricated to fit into the right leading edge of a JetStar aircraft. The article was designed to attach to the front spar and fill in approx. 70 inches of the leading edge that are normally occupied by the large slipper fuel tank. The outer contour of the test article was constrained to align with an external fairing aft of the front spar which provided a surface pressure distribution over the test region representative of an LFC airfoil. LFC is achieved by applying suction through a finely perforated surface, which removes a small fraction of the boundary layer. The LFC test article has a retractable high lift shield to protect the laminar surface from contamination by airborne debris during takeoff and low altitude operation. The shield is designed to intercept insects and other particles that could otherwise impact the leading edge. Because the shield will intercept freezing rain and ice, a oozing glycol ice protection system is installed on the shield leading edge. In addition to the shield, a liquid freezing point depressant can be sprayed on the back of the shield.

  8. Hit and lead criteria in drug discovery for infectious diseases of the developing world.

    PubMed

    Katsuno, Kei; Burrows, Jeremy N; Duncan, Ken; Hooft van Huijsduijnen, Rob; Kaneko, Takushi; Kita, Kiyoshi; Mowbray, Charles E; Schmatz, Dennis; Warner, Peter; Slingsby, B T

    2015-11-01

    Reducing the burden of infectious diseases that affect people in the developing world requires sustained collaborative drug discovery efforts. The quality of the chemical starting points for such projects is a key factor in improving the likelihood of clinical success, and so it is important to set clear go/no-go criteria for the progression of hit and lead compounds. With this in mind, the Japanese Global Health Innovative Technology (GHIT) Fund convened with experts from the Medicines for Malaria Venture, the Drugs for Neglected Diseases initiative and the TB Alliance, together with representatives from the Bill &Melinda Gates Foundation, to set disease-specific criteria for hits and leads for malaria, tuberculosis, visceral leishmaniasis and Chagas disease. Here, we present the agreed criteria and discuss the underlying rationale. PMID:26435527

  9. Project 2000-3 Leading Edge Enterprise: Insights into Employment and Training Practices. Working Paper.

    ERIC Educational Resources Information Center

    Long, Michael; Fischer, John

    Leading-edge firms (LEFs)--at the forefront of their industry in terms of growth or market share--may influence skill development through diffusion of technology, products, or practices and use of market power to set standards or change customer businesses. Study of LEFs can identify the type and mix of skills needed in the industry. LEFs are…

  10. Advanced Refrigerator/Freezer Technology Development Project

    NASA Technical Reports Server (NTRS)

    Cairelli, James E.; Geng, Steven M.

    1999-01-01

    The Advanced Refrigerator/Freezer (R/F) Technology Development Project was initiated in 1994, on the basis of recommendations of a team of NASA Scientists and engineers, who assessed the need for advanced technology to support future life and biomedical sciences space flight missions. The project, which was cofunded by NASA's Office of Aerospace Technology and Life and Biomedical Sciences & Applications Division, has two phases. In the Phase I Advanced R/F Technology Assessment, candidate technologies were identified and ranked, on the basis of a combination of their effect on system performance and their risk of developmental success. In Phase II Technology Development, the advanced technologies with the highest combined ranking, which could be accomplished within the budgetary constraints, were pursued. The effort has been mainly by contract, with a modest in-house effort at the NASA Lewis Research Center. Oceaneering Space Systems (OSS) of Houston, Texas, was selected as the prime contractor for both contract phases.

  11. Mod 2 Wind Turbine Development Project

    SciTech Connect

    1980-10-01

    The primary objective in the development of Mod 2 was to design a wind turbine to produce energy for less than 5 cents/kWh based on 1980 cost forecasts. The pricing method used to project the Mod 2 energy costs is the levelized fixed charge rate approach, generally accepted in the electric utility industry as a basis for relative ranking of energy alternatives. This method derives a levelized energy price necessary to recover utility's purchasing, installing, owning, operating, and maintenance costs.

  12. Leading Change in Principal Development: Notes for the Field.

    ERIC Educational Resources Information Center

    Bingham, C. Steven; Gottfried, Susan

    This document is a practical guide for designing principal-development programs. The target audience includes individuals involved in the design and implementation of principal-preparation and development programs, particularly at the school-district level. Chapter 1, "The Call for New School Leaders and Leadership Development," expresses the need…

  13. Global Software Development Patterns for Project Management

    NASA Astrophysics Data System (ADS)

    Välimäki, Antti; Kääriäinen, Jukka; Koskimies, Kai

    Global software development with the agile or waterfall development process has been taken into use in many companies. GSD offers benefits but also new challenges without known, documented solutions. The goal of this research is to present current best practices for GSD in the form of process patterns for project management, evaluated by using a scenario-based assessment method. The best practices have been collected from a large company operating in process automation. It is expected that the resulting pattern language helps other companies to improve their GSD processes by incorporating the patterns in the processes.

  14. The Lead-Based VENUS-F Facility: Status of the FREYA Project

    NASA Astrophysics Data System (ADS)

    Kochetkov, Anatoly; Vittiglio, Guido; Wagemans, Jan; Uyttenhove, Wim; Krása, Antonín; Hernandez, Jérémie

    2016-02-01

    The GUINEVERE project in the 6th European Framework Program (FP6) [1] aimed to check the methods for sub-criticality monitoring. To execute the project, the water-moderated thermal VENUS facility was modified into the lead fast VENUS-F facility in the period 2007-2010. To prove the reliability of the reactivity monitoring methods, first of all a critical reference configuration was assembled and characterized by measurements of criticality, power distribution, and spectral indexes. These experiments were communicated for benchmarking at ISRD-14 [2]. The Monte Carlo MCNP 5-1.60 code with the JEFF 3.1.2 data library is used to perform simulations of the VENUS-F core, in particular to obtain Calculated-to-Experimental ratios (C/E) for fission rates and spectral indices. A sensitivity study is performed focusing on the impact of global and local parameters on C/E. In most cases C/E is close to unity within the uncertainties. Only a few exceptions were found, e.g. for the F28/F25 spectral index [3]. In order to investigate the discrepancies, a new measurement campaign with the same critical configuration was included in the currently ongoing FREYA project in FP7 [4]. The facility status, experimental plans, and the sensitivity study are presented in this paper.

  15. The NEED (National Energy Education Development) Project

    NASA Astrophysics Data System (ADS)

    Hogan, D.; Spruill, M.

    2012-04-01

    The NEED (National Energy Education Development) Project is a non-profit organization which provides a wide range of K-12 curriculum on energy education topics. The curriculum is specific for primary, elementary, intermediate and secondary levels with age appropriate activities and reading levels. The NEED Project covers a wide range of topics from wind energy, nuclear energy, solar energy, hydropower, hydrogen, fossil fuels, energy conservation, energy efficiency and much more. One of the major strengths of this organization is its Teacher Advisory Board. The curriculum is routinely revised and updated by master classroom teachers who use the lessons and serve on the advisory board. This ensures it is of the highest quality and a useful resource. The NEED Project through a variety of sponsors including businesses, utility companies and government agencies conducts hundreds of teacher professional development workshops each year throughout the United States and have even done some workshops internationally. These workshops are run by trained NEED facilitators. At the workshops, teachers gain background understanding of the energy topics and have time to complete the hands on activities which make up the curriculum. The teachers are then sent a kit of equipment after successfully completing the workshop. This allows them to teach the curriculum and have their students perform the hands on labs and activities in the classroom. The NEED Project is the largest provider of energy education related curriculum in the United States. Their efforts are educating teachers about energy topics and in turn educating students in the hope of developing citizens who are energy literate. Many of the hands on activities used to teach about various energy sources will be described and demonstrated.

  16. The advanced software development workstation project

    NASA Technical Reports Server (NTRS)

    Fridge, Ernest M., III; Pitman, Charles L.

    1991-01-01

    The Advanced Software Development Workstation (ASDW) task is researching and developing the technologies required to support Computer Aided Software Engineering (CASE) with the emphasis on those advanced methods, tools, and processes that will be of benefit to support all NASA programs. Immediate goals are to provide research and prototype tools that will increase productivity, in the near term, in projects such as the Software Support Environment (SSE), the Space Station Control Center (SSCC), and the Flight Analysis and Design System (FADS) which will be used to support the Space Shuttle and Space Station Freedom. Goals also include providing technology for development, evolution, maintenance, and operations. The technologies under research and development in the ASDW project are targeted to provide productivity enhancements during the software life cycle phase of enterprise and information system modeling, requirements generation and analysis, system design and coding, and system use and maintenance. On-line user's guides will assist users in operating the developed information system with knowledge base expert assistance.

  17. NASA Redox Storage System Development Project

    NASA Technical Reports Server (NTRS)

    Hagedorn, N. H.

    1984-01-01

    The Redox Storage System Technology Project was jointly supported by the U.S. Department of Energy and NASA. The objectives of the project were to develop the Redox flow battery concept and to probe its technical and economic viability. The iron and chromium redox couples were selected as the reactants. Membranes and electrodes were developed for the original mode of operating at 25 C with the reactants separated by an ion-exchange membrane. Analytical capabilities and system-level operating concepts were developed and verified in a 1-kW, 13-kWh preprototype system. A subsequent change was made in operating mode, going to 65 C and using mixed reactants. New membranes and a new electrode catalyst were developed, resulting in single cell operation as high as 80 mA/sq cm with energy efficiencies greater than 80 percent. Studies indicate a likely system cost of about $75/kWh. Standard Oil of Ohio (Sohio) has undertaken further development of the Redox system. An exclusive patent license was obtained from NASA by Sohio. Transfer of Redox technology to Sohio is supported by the NASA Technology Utilization Office.

  18. Developing financeable projects in Central Europe

    SciTech Connect

    Chelberg, R.; Prerad, V.

    1995-12-01

    POWER`s engineering and development experience in the Czech Republic creating financeable projects within the power generation industry will be presented. POWER has been involved in the Czech Republic`s privatization process, environmental legislation as well as formation of the regulatory environment. Strategic methods for accomplishing the development of financeable projects often include ownership and financial restructuring of the projects. This is done by utilizing internal cash flows, external debt and equity placement (provided by international financial institutions) by restructuring the facility`s contractual relationships and operations (providing as least cost solution to engineering) and possibly using existing governmental guarantees. In order to make any recommendations on how to come into compliance with the country`s environmental legislation, it is necessary to begin with an analysis of the existing facility. This involves preparation of technical and economic feasibility study, evaluation of technology and preliminary engineering solutions. It further involves restructuring of power sales agreements, heat sales agreements, and fuel supply agreements. The goal is to provide suitable security for the equity and debt financing participants by mitigating risk and creating a single purpose business unit with predictable life and economics.

  19. The TPS Advanced Development Project for CEV

    NASA Technical Reports Server (NTRS)

    Reuther, James; Wercinski, Paul; Venkatapathy, Ethiraj; Ellerby, Don; Raiche, George; Bowman, Lynn; Jones, Craig; Kowal, John

    2006-01-01

    The CEV TPS Advanced Development Project (ADP) is a NASA in-house activity for providing two heatshield preliminary designs (a Lunar direct return as well as a LEO only return) for the CEV, including the TPS, the carrier structure, the interfaces and the attachments. The project s primary objective is the development of a single heatshield preliminary design that meets both Lunar direct return and LEO return requirements. The effort to develop the Lunar direct return capable heatshield is considered a high risk item for the NASA CEV development effort due to the low TRL (approx. 4) of the candidate TPS materials. By initiating the TPS ADP early in the development cycle, the intent is to use materials analysis and testing in combination with manufacturing demonstrations to reduce the programmatic risk of using advanced TPS technologies in the critical path for CEV. Due to the technical and schedule risks associated a Lunar return heatshield, the ADP will pursue a parallel path design approach, whereby a back-up TPS/heatshield design that only meets LEO return requirements is also developed. The TPS materials and carrier structure design concept selections will be based on testing, analysis, design and evaluation of scalability and manufacturing performed under the ADP. At the TPS PDR, the preferred programmatic strategy is to transfer the continued (detailed) design, development, testing and evaluation (DDT&E) of both the Lunar direct and LEO return designs to a government/prime contractor coordinated sub-system design team. The CEV prime contractor would have responsibility for the continued heatshield sub-system development. Continued government participation would include analysis, testing and evaluation as well as decision authority at TPS Final System Decision (FSD) (choosing between the primary and back-up heatshields) occurring between TPS PDR and TPS Critical Design Review (CDR). After TPS FSD the prime CEV contractor will complete the detailed design

  20. Development of a 3D printer using scanning projection stereolithography

    PubMed Central

    Lee, Michael P.; Cooper, Geoffrey J. T.; Hinkley, Trevor; Gibson, Graham M.; Padgett, Miles J.; Cronin, Leroy

    2015-01-01

    We have developed a system for the rapid fabrication of low cost 3D devices and systems in the laboratory with micro-scale features yet cm-scale objects. Our system is inspired by maskless lithography, where a digital micromirror device (DMD) is used to project patterns with resolution up to 10 µm onto a layer of photoresist. Large area objects can be fabricated by stitching projected images over a 5cm2 area. The addition of a z-stage allows multiple layers to be stacked to create 3D objects, removing the need for any developing or etching steps but at the same time leading to true 3D devices which are robust, configurable and scalable. We demonstrate the applications of the system by printing a range of micro-scale objects as well as a fully functioning microfluidic droplet device and test its integrity by pumping dye through the channels. PMID:25906401

  1. Learning to Lead: The Professional Development Needs of Assistant Principals

    ERIC Educational Resources Information Center

    Allen, James G.; Weaver, Rosa L.

    2014-01-01

    The purpose of this study was to investigate the professional development needs of assistant principals in the northern Kentucky region in preparation for the launch of the Northern Kentucky Assistant Principals' Network, a unique and innovative program to support their leadership development. Using the Educational Leadership Policy Standards:…

  2. Leading an Effective Improvement and Development Programme for Children's Centres

    ERIC Educational Resources Information Center

    Weston, Gill; Tyler, Mary

    2015-01-01

    This article reviews the process and achievements of leadership of an improvement and development programme for children's centres in the context of public value and Ofsted inspection. It analyses how the capacity has been developed of children's centre managers to work more strategically and collectively. Distributed leadership theory is applied…

  3. Advanced Gas Turbine (AGT) Technology Development Project, ceramic component developments

    NASA Technical Reports Server (NTRS)

    Teneyck, M. O.; Macbeth, J. W.; Sweeting, T. B.

    1987-01-01

    The ceramic component technology development activity conducted by Standard Oil Engineered Materials Company while performing as a principal subcontractor to the Garrett Auxiliary Power Division for the Advanced Gas Turbine (AGT) Technology Development Project (NASA Contract DEN3-167) is summarized. The report covers the period October 1979 through July 1987, and includes information concerning ceramic technology work categorized as common and unique. The former pertains to ceramic development applicable to two parallel AGT projects established by NASA contracts DEN3-168 (AGT100) and DEN3-167 (AGT101), whereas the unique work solely pertains to Garrett directed activity under the latter contract. The AGT101 Technology Development Project is sponsored by DOE and administered by NASA-Lewis. Standard Oil directed its efforts toward the development of ceramic materials in the silicon-carbide family. Various shape forming and fabrication methods, and nondestructive evaluation techniques were explored to produce the static structural components for the ceramic engine. This permitted engine testing to proceed without program slippage.

  4. The Near-Term Product Development Project

    SciTech Connect

    Not Available

    1994-05-01

    Since 1990, the US Department of Energy (DOE) and members of the US wind industry have been working as partners to development advanced, highly efficient wind turbines. The overall goal of these partnerships is to develop turbines that can complete successfully in the world`s utility markets for low-cost electricity. The cost goal is to produce electricity at or below $0.05/kWh in moderate winds. Moderate winds (6.9 mps [15.4 mph] at hub heights) prevail in large expanses of the Great Plains, where much of the vast wind resources of this country are located. Under the Near-Term Product Development Project, begun in 1992, several US companies are building and testing turbine prototypes.

  5. Sampling and Analysis for Lead in Water and Soil Samples on a University Campus: A Student Research Project.

    ERIC Educational Resources Information Center

    Butala, Steven J.; Zarrabi, Kaveh

    1995-01-01

    Describes a student research project that determined concentrations of lead in water drawn from selected drinking fountains and in selected soil samples on the campus of the University of Nevada, Las Vegas. (18 references) (DDR)

  6. NASA'S Robotic Lunar Lander Development Project

    NASA Astrophysics Data System (ADS)

    Cohen, Barbara A.; Chavers, D. Gregory; Ballard, Benjamin W.

    2012-10-01

    Over the last 5 years, NASA has invested in development and risk-reduction activities for a new generation of planetary landers capable of carrying instruments and technology demonstrations to the lunar surface and other airless bodies. The Robotic Lunar Lander Development Project (RLLDP) is jointly implemented by NASA Marshall Space Flight Center (MSFC) and the Johns Hopkins University Applied Physics Laboratory (APL). The RLLDP team has produced mission architecture designs for multiple airless body missions to meet both science and human precursor mission needs. The mission architecture concept studies encompass small, medium, and large landers, with payloads from a few tens of kilograms to over 1000 kg, to the Moon and other airless bodies. To mature these concepts, the project has made significant investments in technology risk reduction in focused subsystems. In addition, many lander technologies and algorithms have been tested and demonstrated in an integrated systems environment using free-flying test articles. These design and testing investments have significantly reduced development risk for airless body landers, thereby reducing overall risk and associated costs for future missions.

  7. Advanced Gas Turbine (AGT) technology development project

    NASA Technical Reports Server (NTRS)

    1987-01-01

    This report is the final in a series of Technical Summary Reports for the Advanced Gas Turbine (AGT) Technology Development Project, authorizrd under NASA Contract DEN3-167 and sponsored by the DOE. The project was administered by NASA-Lewis Research Center of Cleveland, Ohio. Plans and progress are summarized for the period October 1979 through June 1987. This program aims to provide the US automotive industry the high risk, long range technology necessary to produce gas turbine engines for automobiles that will reduce fuel consumption and reduce environmental impact. The intent is that this technology will reach the marketplace by the 1990s. The Garrett/Ford automotive AGT was designated AGT101. The AGT101 is a 74.5 kW (100 shp) engine, capable of speeds to 100,000 rpm, and operates at turbine inlet temperatures to 1370 C (2500 F) with a specific fuel consumption level of 0.18 kg/kW-hr (0.3 lbs/hp-hr) over most of the operating range. This final report summarizes the powertrain design, power section development and component/ceramic technology development.

  8. Session: Pre-development project risk assessment

    SciTech Connect

    Curry, Richard; Linehan, Andy

    2004-09-01

    This second session at the Wind Energy and Birds/Bats workshop consisted of two presentations followed by a discussion/question and answer period. The focus of the presentations was on the practices and methodologies used in the wind energy industry for assessing risk to birds and bats at candidate project sites. Presenters offered examples of pre-development siting evaluation requirements set by certain states. Presentation one was titled ''Practices and Methodologies and Initial Screening Tools'' by Richard Curry of Curry and Kerlinger, LLC. Presentation two was titled ''State of the Industry in the Pacific Northwest'' by Andy Linehan, CH2MHILL.

  9. Advanced EVA Suit Camera System Development Project

    NASA Technical Reports Server (NTRS)

    Mock, Kyla

    2016-01-01

    The National Aeronautics and Space Administration (NASA) at the Johnson Space Center (JSC) is developing a new extra-vehicular activity (EVA) suit known as the Advanced EVA Z2 Suit. All of the improvements to the EVA Suit provide the opportunity to update the technology of the video imagery. My summer internship project involved improving the video streaming capabilities of the cameras that will be used on the Z2 Suit for data acquisition. To accomplish this, I familiarized myself with the architecture of the camera that is currently being tested to be able to make improvements on the design. Because there is a lot of benefit to saving space, power, and weight on the EVA suit, my job was to use Altium Design to start designing a much smaller and simplified interface board for the camera's microprocessor and external components. This involved checking datasheets of various components and checking signal connections to ensure that this architecture could be used for both the Z2 suit and potentially other future projects. The Orion spacecraft is a specific project that may benefit from this condensed camera interface design. The camera's physical placement on the suit also needed to be determined and tested so that image resolution can be maximized. Many of the options of the camera placement may be tested along with other future suit testing. There are multiple teams that work on different parts of the suit, so the camera's placement could directly affect their research or design. For this reason, a big part of my project was initiating contact with other branches and setting up multiple meetings to learn more about the pros and cons of the potential camera placements we are analyzing. Collaboration with the multiple teams working on the Advanced EVA Z2 Suit is absolutely necessary and these comparisons will be used as further progress is made for the overall suit design. This prototype will not be finished in time for the scheduled Z2 Suit testing, so my time was

  10. 14 CFR 152.107 - Project eligibility: Airport development.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Project eligibility: Airport development....107 Project eligibility: Airport development. (a) Except in the case of approved stage development, each project for airport development must provide for— (1) Development of an airport or unit of...

  11. 14 CFR 152.107 - Project eligibility: Airport development.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Project eligibility: Airport development....107 Project eligibility: Airport development. (a) Except in the case of approved stage development, each project for airport development must provide for— (1) Development of an airport or unit of...

  12. 14 CFR 152.107 - Project eligibility: Airport development.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Project eligibility: Airport development....107 Project eligibility: Airport development. (a) Except in the case of approved stage development, each project for airport development must provide for— (1) Development of an airport or unit of...

  13. 14 CFR 152.107 - Project eligibility: Airport development.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Project eligibility: Airport development....107 Project eligibility: Airport development. (a) Except in the case of approved stage development, each project for airport development must provide for— (1) Development of an airport or unit of...

  14. 14 CFR 152.107 - Project eligibility: Airport development.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Project eligibility: Airport development....107 Project eligibility: Airport development. (a) Except in the case of approved stage development, each project for airport development must provide for— (1) Development of an airport or unit of...

  15. Leading for Urban School Reform and Community Development

    ERIC Educational Resources Information Center

    Green, Terrance L.

    2015-01-01

    Purpose: Improving urban schools of color and the communities where they are located requires leadership that spans school and community boundaries. The purpose of this study is to understand how principal and community leader actions support urban school reform along with community development at two community schools in the urban Midwest and…

  16. "Where the Spirit Leads"--The Development of Pentecostal Hermeneutics

    ERIC Educational Resources Information Center

    Thomas, John Christopher

    2009-01-01

    This article traces the development of Pentecostal hermeneutics by focusing on the touchstones in this emerging discipline. Whilst the literature devoted to this topic is enlarging at an astounding rate, and not all worthy pieces can be cited, this article focuses especially on approaches that appear to be most constructive. This study acquaints…

  17. Olfactory Bulbectomy Leads to the Development of Epilepsy in Mice

    PubMed Central

    Jiang, Yifei; Pun, Raymund Y. K.; Peariso, Katrina; Holland, Katherine D.; Lian, Qingquan; Danzer, Steve C.

    2015-01-01

    There is a clear link between epilepsy and depression. Clinical data demonstrate a 30–35% lifetime prevalence of depression in patients with epilepsy, and patients diagnosed with depression have a three to sevenfold higher risk of developing epilepsy. Traditional epilepsy models partially replicate the clinical observations, with the demonstration of depressive traits in epileptic animals. Studies assessing pro-epileptogenic changes in models of depression, however, are more limited. Here, we examined whether a traditional rodent depression model—bilateral olfactory bulbectomy—predisposes the animals towards the development of epilepsy. Past studies have demonstrated increased neuronal excitability after bulbectomy, but continuous seizure monitoring had not been conducted. For the present study, we monitored control and bulbectomized animals by video-EEG 24/7 for approximately two weeks following the surgery to determine whether they develop spontaneous seizures. All seven bulbectomized mice exhibited seizures during the monitoring period. Seizures began about one week after surgery, and occurred in clusters with severity increasing over the monitoring period. These results suggest that olfactory bulbectomy could be a useful model of TBI-induced epilepsy, with advantages of relatively rapid seizure onset and a high number of individuals developing the disease. The model may also be useful for investigating the mechanisms underlying the bidirectional relationship between epilepsy and depression. PMID:26368332

  18. Agile Project Management for e-Learning Developments

    ERIC Educational Resources Information Center

    Doherty, Iain

    2010-01-01

    We outline the project management tactics that we developed in praxis in order to manage elearning projects and show how our tactics were enhanced through implementing project management techniques from a formal project management methodology. Two key factors have contributed to our project management success. The first is maintaining a clear…

  19. Cyrogenic Life Support Technology Development Project

    NASA Technical Reports Server (NTRS)

    Bush, David R.

    2015-01-01

    KSC has used cryogenic life support (liquid air based) technology successfully for many years to support spaceflight operations. This technology has many benefits unique to cryogenics when compared to traditional compressed gas systems: passive cooling, lighter, longer duration, and lower operating pressure. However, there are also several limiting factors that have prevented the technology from being commercialized. The National Institute of Occupational Safety and Health, Office of Mine Safety and Health Research (NIOSH-OMSHR) has partnered with NASA to develop a complete liquid air based life support solution for emergency mine escape and rescue. The project will develop and demonstrate various prototype devices and incorporate new technological innovations that have to date prevented commercialization.

  20. Projected uranium requirements of developing countries

    SciTech Connect

    1990-02-01

    The objective of this paper is to examine the uranium requirements of developing countries both in aggregate and individually. Although the cumulative uranium requirements of these countries are expected to account for less than eight percent of total requirements, the fact that many of these countries are expressing renewed interest in nuclear is, in itself, encouraging. The countries analyzed in this paper are Argentina, Brazil, Egypt, India, Israel, Mexico, Pakistan, South Africa, South Korea and Taiwan. For each country, the existing and planned nuclear capacity levels have been identified and capacity factors have been projected. For countries with no previous nuclear power, the world weighted average capacity factor for the specific reactor type is utilized. Other factors influencing nuclear power demand and operations of these developing countries will be discussed, and finally, uranium requirements based on a calculated optimal tails assay of .30 will be provided.

  1. The Advanced Software Development and Commercialization Project

    SciTech Connect

    Gallopoulos, E. . Center for Supercomputing Research and Development); Canfield, T.R.; Minkoff, M.; Mueller, C.; Plaskacz, E.; Weber, D.P.; Anderson, D.M.; Therios, I.U. ); Aslam, S.; Bramley, R.; Chen, H.-C.; Cybenko, G.; Gallopoulos, E.; Gao, H.; Malony, A.; Sameh, A. . Center for Supercomputing Research

    1990-09-01

    This is the first of a series of reports pertaining to progress in the Advanced Software Development and Commercialization Project, a joint collaborative effort between the Center for Supercomputing Research and Development of the University of Illinois and the Computing and Telecommunications Division of Argonne National Laboratory. The purpose of this work is to apply techniques of parallel computing that were pioneered by University of Illinois researchers to mature computational fluid dynamics (CFD) and structural dynamics (SD) computer codes developed at Argonne. The collaboration in this project will bring this unique combination of expertise to bear, for the first time, on industrially important problems. By so doing, it will expose the strengths and weaknesses of existing techniques for parallelizing programs and will identify those problems that need to be solved in order to enable wide spread production use of parallel computers. Secondly, the increased efficiency of the CFD and SD codes themselves will enable the simulation of larger, more accurate engineering models that involve fluid and structural dynamics. In order to realize the above two goals, we are considering two production codes that have been developed at ANL and are widely used by both industry and Universities. These are COMMIX and WHAMS-3D. The first is a computational fluid dynamics code that is used for both nuclear reactor design and safety and as a design tool for the casting industry. The second is a three-dimensional structural dynamics code used in nuclear reactor safety as well as crashworthiness studies. These codes are currently available for both sequential and vector computers only. Our main goal is to port and optimize these two codes on shared memory multiprocessors. In so doing, we shall establish a process that can be followed in optimizing other sequential or vector engineering codes for parallel processors.

  2. Management Guidelines for Database Developers' Teams in Software Development Projects

    NASA Astrophysics Data System (ADS)

    Rusu, Lazar; Lin, Yifeng; Hodosi, Georg

    Worldwide job market for database developers (DBDs) is continually increasing in last several years. In some companies, DBDs are organized as a special team (DBDs team) to support other projects and roles. As a new role, the DBDs team is facing a major problem that there are not any management guidelines for them. The team manager does not know which kinds of tasks should be assigned to this team and what practices should be used during DBDs work. Therefore in this paper we have developed a set of management guidelines, which includes 8 fundamental tasks and 17 practices from software development process, by using two methodologies Capability Maturity Model (CMM) and agile software development in particular Scrum in order to improve the DBDs team work. Moreover the management guidelines developed here has been complemented with practices from authors' experience in this area and has been evaluated in the case of a software company. The management guidelines for DBD teams presented in this paper could be very usefully for other companies too that are using a DBDs team and could contribute towards an increase of the efficiency of these teams in their work on software development projects.

  3. NASA-DoD Lead-Free Electronics Project. DRAFT Joint Test Report

    NASA Technical Reports Server (NTRS)

    Kessel, Kurt

    2011-01-01

    The use of conventional tin-lead (SnPb) in circuit board manufacturing is under ever-increasing political scrutiny due to increasing regulations concerning lead. The "Restriction of Hazardous Substances" (RoHS) directive enacted by the European Union (EU) and a pact between the United States National Electronics Manufacturing Initiative (NEMI), Europe's Soldertec at Tin Technology Ltd. and the Japan Electronics and Information Technology Industries Association (JEITA) are just two examples where worldwide legislative actions and partnerships/agreements are affecting the electronics industry. As a result, many global commercial-grade electronic component suppliers are initiating efforts to transition to lead-free (Pb-free) in order to retain their worldwide market. Pb-free components are likely to find their way into the inventory of aerospace or military assembly processes under current government acquisition reform initiatives. Inventories "contaminated" by Pb-free will result in increased risks associated with the manufacturing, product reliability, and subsequent repair of aerospace and military electronic systems. Although electronics for military and aerospace applications are not included in the RoHS legislation, engineers are beginning to find that the commercial industry's move towards RoHS compliance has affected their supply chain and changed their parts. Most parts suppliers plan to phase out their non-compliant, leaded production and many have already done so. As a result, the ability to find leaded components is getting harder and harder. Some buyers are now attempting to acquire the remaining SnPb inventory, if it's not already obsolete. Original Equipment Manufacturers (OEMs), depots, and support contractors have to be prepared to deal with an electronics supply chain that increasingly provides more and more parts with Pb-free finishes-some labeled no differently than their Pb counterparts-while at the same time providing the traditional Pb parts

  4. Fast Charging Electric Vehicle Research & Development Project

    SciTech Connect

    Heny, Michael

    2014-03-31

    The research and development project supported the engineering, design and implementation of on-road Electric Vehicle (“EV”) charging technologies. It included development of potential solutions for DC fast chargers (“DCFC”) capable of converting high voltage AC power to the DC power required by EVs. Additional development evaluated solutions related to the packaging of power electronic components and enclosure design, as well as for the design and evaluation of EV charging stations. Research compared different charging technologies to identify optimum applications in a municipal fleet. This project collected EV usage data and generated a report demonstrating that EVs, when supported by adequate charging infrastructure, are capable of replacing traditional internal combustion vehicles in many municipal applications. The project’s period of performance has demonstrated various methods of incorporating EVs into a municipal environment, and has identified three general categories for EV applications: - Short Commute: Defined as EVs performing in limited duration, routine commutes. - Long Commute: Defined as tasks that require EVs to operate in longer daily mileage patterns. - Critical Needs: Defined as the need for EVs to be ready at every moment for indefinite periods. Together, the City of Charlottesville, VA (the “City”) and Aker Wade Power Technologies, LLC (“Aker Wade”) concluded that the EV has a viable position in many municipal fleets but with limited recommendation for use in Critical Needs applications such as Police fleets. The report also documented that, compared to internal combustion vehicles, BEVs have lower vehicle-related greenhouse gas (“GHG”) emissions and contribute to a reduction of air pollution in urban areas. The enhanced integration of EVs in a municipal fleet can result in reduced demand for imported oil and reduced municipal operating costs. The conclusions indicated in the project’s Engineering Report (see

  5. Great Plains Wind Energy Transmission Development Project

    SciTech Connect

    Brad G. Stevens, P.E.; Troy K. Simonsen; Kerryanne M. Leroux

    2012-06-09

    In fiscal year 2005, the Energy & Environmental Research Center (EERC) received funding from the U.S. Department of Energy (DOE) to undertake a broad array of tasks to either directly or indirectly address the barriers that faced much of the Great Plains states and their efforts to produce and transmit wind energy at the time. This program, entitled Great Plains Wind Energy Transmission Development Project, was focused on the central goal of stimulating wind energy development through expansion of new transmission capacity or development of new wind energy capacity through alternative market development. The original task structure was as follows: Task 1 - Regional Renewable Credit Tracking System (later rescoped to Small Wind Turbine Training Center); Task 2 - Multistate Transmission Collaborative; Task 3 - Wind Energy Forecasting System; and Task 4 - Analysis of the Long-Term Role of Hydrogen in the Region. As carried out, Task 1 involved the creation of the Small Wind Turbine Training Center (SWTTC). The SWTTC, located Grand Forks, North Dakota, consists of a single wind turbine, the Endurance S-250, on a 105-foot tilt-up guyed tower. The S-250 is connected to the electrical grid on the 'load side' of the electric meter, and the power produced by the wind turbine is consumed locally on the property. Establishment of the SWTTC will allow EERC personnel to provide educational opportunities to a wide range of participants, including grade school through college-level students and the general public. In addition, the facility will allow the EERC to provide technical training workshops related to the installation, operation, and maintenance of small wind turbines. In addition, under Task 1, the EERC hosted two small wind turbine workshops on May 18, 2010, and March 8, 2011, at the EERC in Grand Forks, North Dakota. Task 2 involved the EERC cosponsoring and aiding in the planning of three transmission workshops in the midwest and western regions. Under Task 3, the

  6. The Mod-2 wind turbine development project

    NASA Technical Reports Server (NTRS)

    Linscott, B. S.; Dennett, J. T.; Gordon, L. H.

    1981-01-01

    A major phase of the Federal Wind Energy Program, the Mod-2 wind turbine, a second-generation machine developed by the Boeing Engineering and Construction Co. for the U.S. Department of Energy and the Lewis Research Center of the National Aeronautics and Space Administration, is described. The Mod-2 is a large (2.5-MW power rating) horizontal-axis wind turbine designed for the generation of electrical power on utility networks. Three machines were built and are located in a cluster at Goodnoe Hills, Washington. All technical aspects of the project are described: design approach, significant innovation features, the mechanical system, the electrical power system, the control system, and the safety system.

  7. NASA long duration balloon capability development project

    NASA Astrophysics Data System (ADS)

    Stuchlik, D.; Craddock, W.

    1993-02-01

    The potential benefits of a Long Duration Balloon (LDB) capability have long been recognized and some modest efforts have previously been undertaken by the National Center for Atmospheric Research (NCAR), the National Scientific Balloon Facility (NSBF), et. al., going back to the late 1960's. In 1988, the National Aeronautics and Space Administration (NASA) made a decision to dedicate significant resources toward this effort and a technical and management approach was established. The objective of the project is to develop a near global LDB capability for both Antarctic and mid-latitude applications, including the required telecommunications, navigation and positioning, power, data processing and control systems necessary to conduct flights of scientific experiments weighing 1500 pounds or more on conventional balloons for periods of up to three weeks. The first operational use of the new capability is planned in support of Solar Max experiments in Antarctica during the 1991-1992 austral summer. Development of the Antarctica support system configuration has been initiated and the first test flight was conducted from McMurdo Station in December 1989 - January 1990. The progress, status and future plans for development of the new LDB capability will be discussed.

  8. Recent developments in the BRAMS project

    NASA Astrophysics Data System (ADS)

    Calders, Stijn; Lamy, Hervé; Gamby, Emmanuel; Ranvier, Sylvain

    2014-01-01

    In 2009, the Belgian Institute for Space Aeronomy (BIRA-IASB) initiated the development of BRAMS, a Belgian network of radio receiving stations using forward scattering techniques to detect meteors. The primary goals of the project are (1) to collect data and to provide them to the community; (2) to retrieve information about the meteoroid trajectory; and (3) to study the activity profiles of the main meteor showers. In this paper, the work performed since the 2012 International Meteor Conference in La Palma, Canary Islands, Spain, is presented: (1) a software to decode the GPS signal has been developed and added to all BRAMS stations; (2) a workshop about automatic detection of features in radio data was organized in order to discuss about suitable image processing techniques that can be used for radio meteor echoes detection in the BRAMS spectrograms; (3) to assess the quality of such an image processing technique, a big set of manually counted meteors is necessary. A web application has been developed to support this task and facilitate the comparison of counts by different users; (4) to compute the meteoroid flux and for other applications, the radiation pattern of the different antennas must be known. Someone has been hired recently to make simulations of these radiations patterns as well as to carry out measurement campaigns; and (5) detection of solar flares in BRAMS data has been investigated.

  9. Advanced Gas Turbine (AGT) Technology Development Project

    NASA Technical Reports Server (NTRS)

    1987-01-01

    This report is the eleventh in the series of Technical Summary reports for the Advanced Gas Turbine (AGT) Technology Development Project, authorized under NASA Contract DEN3-167, and sponsored by the Department of Energy (DOE). This report was prepared by Garrett Turbine Engine Company, A Division of the Garrett Corporation, and includes information provided by Ford Motor Company, the Standard Oil Company, and AiResearch Casting Company. This report covers plans and progress for the period July 1, 1985 through June 30, 1986. Technical progress during the reported period was highlighted by the 85-hour endurance run of an all-ceramic engine operating in the 2000 to 2250 F temperature regime. Component development continued in the areas of the combustion/fuel injection system, regenerator and seals system, and ceramic turbine rotor attachment design. Component rig testing saw further refinements. Ceramic materials showed continued improvements in required properties for gas turbine applications; however, continued development is needed before performance and reliability goals can be set.

  10. NASA redox storage system development project

    NASA Technical Reports Server (NTRS)

    1983-01-01

    The operating temperature was raised from 25 C to 65 C, which enhanced the kinetics of the chromium electrode charging reactions. The design of the auxiliary electrochemical cell, which is used to keep both reactants at the same state of charge, was modified, leading to better and more stable performance. Preliminary testing has shown that the four tank mode of operation improves energy efficiency as much as 5 percentage points over the conventional two tank mode. Another variation in operating mode, the use of mixed reactants, potentially offers several very attractive advantages. Preliminary reactant cost studies lend further weight to the feasibility of the mixed reactant concept. Electrode studies show that reproducibility of performance is very dependent on the pyrolysis temperature at which the carbon/graphite felt substrate is formed. Membrane development work continued to concentrate on cost reduction and the enhancement of resistivity and selectivity.

  11. Manufacturing technology education development project. Project accomplishment summary for 91-Y12P-050-A1

    SciTech Connect

    Douglass, S.; Smith, R.

    1996-09-25

    The purpose of the project was to provide a set of supplemental instructional equipment and materials to Tennessee high school students to raise their level of knowledge about manufacturing technologies with the hope that some of the best and brightest would choose manufacturing as a career path. The role of the Y-12 Plant was primarily technical: renovate the portable classroom; select and purchase appropriate equipment; install and test the equipment; assist in the development of the curriculum; train the initial group of teachers; and provide technical assistance where needed after the laboratory was deployed. The role of the Department of Education was to provide the mobile facility; assist in the design of the laboratory; lead the development of the curriculum; deploy the trailer; and develop the structure for administering the selection of schools, training teachers, and movement of the laboratory. The Department of Education as subcontracted with Middle Tennessee State University to handle the details of laboratory deployment.

  12. NASA Game Changing Development Program Manufacturing Innovation Project

    NASA Technical Reports Server (NTRS)

    Tolbert, Carol; Vickers, John

    2011-01-01

    This presentation examines the new NASA Manufacturing Innovation Project. The project is a part of the Game Changing Development Program which is one element of the Space Technology Programs Managed by Office of the Chief Technologist. The project includes innovative technologies in model-based manufacturing, digital additive manufacturing, and other next generation manufacturing tools. The project is also coupled with the larger federal initiatives in this area including the National Digital Engineering and Manufacturing Initiative and the Advanced Manufacturing Partnership. In addition to NASA, other interagency partners include the Department of Defense, Department of Commerce, NIST, Department of Energy, and the National Science Foundation. The development of game-changing manufacturing technologies are critical for NASA s mission of exploration, strengthening America s manufacturing competitiveness, and are highly related to current challenges in defense manufacturing activities. There is strong consensus across industry, academia, and government that the future competitiveness of U.S. industry will be determined, in large part, by a technologically advanced manufacturing sector. This presentation highlights the prospectus of next generation manufacturing technologies to the challenges faced NASA and by the Department of Defense. The project focuses on maturing innovative/high payoff model-based manufacturing technologies that may lead to entirely new approaches for a broad array of future NASA missions and solutions to significant national needs. Digital manufacturing and computer-integrated manufacturing "virtually" guarantee advantages in quality, speed, and cost and offer many long-term benefits across the entire product lifecycle. This paper addresses key enablers and emerging strategies in areas such as: Current government initiatives, Model-based manufacturing, and Additive manufacturing.

  13. Thermal Protection System (Heat Shield) Development - Advanced Development Project

    NASA Technical Reports Server (NTRS)

    Kowal, T. John

    2010-01-01

    The Orion Thermal Protection System (TPS) ADP was a 3 1/2 year effort to develop ablative TPS materials for the Orion crew capsule. The ADP was motivated by the lack of available ablative TPS's. The TPS ADP pursued a competitive phased development strategy with succeeding rounds of development, testing and down selections. The Project raised the technology readiness level (TRL) of 8 different TPS materials from 5 different commercial vendors, eventual down selecting to a single material system for the Orion heat shield. In addition to providing a heat shield material and design for Orion on time and on budget, the Project accomplished the following: 1) Re-invigorated TPS industry & re-established a NASA competency to respond to future TPS needs; 2) Identified a potentially catastrophic problem with the planned MSL heat shield, and provided a viable, high TRL alternate heat shield design option; and 3) Transferred mature heat shield material and design options to the commercial space industry, including TPS technology information for the SpaceX Dragon capsule.

  14. Developing Novel Reservoir Rule Curves Using Seasonal Inflow Projections

    NASA Astrophysics Data System (ADS)

    Tseng, Hsin-yi; Tung, Ching-pin

    2015-04-01

    Due to significant seasonal rainfall variations, reservoirs and their flexible operational rules are indispensable to Taiwan. Furthermore, with the intensifying impacts of climate change on extreme climate, the frequency of droughts in Taiwan has been increasing in recent years. Drought is a creeping phenomenon, the slow onset character of drought makes it difficult to detect at an early stage, and causes delays on making the best decision of allocating water. For these reasons, novel reservoir rule curves using projected seasonal streamflow are proposed in this study, which can potentially reduce the adverse effects of drought. This study dedicated establishing new rule curves which consider both current available storage and anticipated monthly inflows with leading time of two months to reduce the risk of water shortage. The monthly inflows are projected based on the seasonal climate forecasts from Central Weather Bureau (CWB), which a weather generation model is used to produce daily weather data for the hydrological component of the GWLF. To incorporate future monthly inflow projections into rule curves, this study designs a decision flow index which is a linear combination of current available storage and inflow projections with leading time of 2 months. By optimizing linear relationship coefficients of decision flow index, the shape of rule curves and the percent of water supply in each zone, the best rule curves to decrease water shortage risk and impacts can be developed. The Shimen Reservoir in the northern Taiwan is used as a case study to demonstrate the proposed method. Existing rule curves (M5 curves) of Shimen Reservoir are compared with two cases of new rule curves, including hindcast simulations and historic seasonal forecasts. The results show new rule curves can decrease the total water shortage ratio, and in addition, it can also allocate shortage amount to preceding months to avoid extreme shortage events. Even though some uncertainties in

  15. Role of geology in diamond project development

    NASA Astrophysics Data System (ADS)

    Jakubec, Jaroslav

    2004-09-01

    For a mining operation to be successful, it is important to bring fundamental and applied science together. The mining engineer needs to understand the importance of geology, mineralogy and petrography, and how projects can benefit from the data collected during the exploration and pre-exploration stage. Geological scientists also need to understand the process of project development from the exploration stage through mine design and operation to mine closure. Kimberlite pipe or dyke emplacement, geology and petrology/mineralogy are three areas that illustrate how information obtained from the geological studies could directly influence the mining method selection and the project strategy and design. Kimberlite emplacement is one of the fundamental processes that rely on knowledge of the kimberlite body geology. Although the importance of the emplacement model is commonly recognized in the resource geology, mining engineers do not always appreciate its importance to the mine design. The knowledge of the orebody geometry, character of the contact zones, internal structures and distribution of inclusions could directly influence pit wall stability (thus strip ratio), underground mining method selection, dilution, treatability, and the dewatering strategy. Understanding the internal kimberlite geology mainly includes the geometry and character of individual phases, and the orientation and character of internal structures that transect the rock mass. For any mining method it is important to know "where the less and where the more competent rocks are located" to achieve stability. On the other hand, the detailed facies studies may not be important for the resource and mine design if the rock types have similar physical properties and diamond content. A good understanding of the kimberlite petrology and mineralogy could be crucial not only to the treatability (namely diamond damage and liberation), but also to the pit wall and underground excavation stability, support

  16. Small Hydropower Research and Development Technology Project

    SciTech Connect

    Blackmore, Mo

    2013-12-06

    The objective of this work was to investigate, develop, and validate the next generation of small hydroturbine generator designs that maximize the energy transfer from flowing water to electrical power generation. What resulted from this effort was the design of a new technology hydroturbine that Near Space Systems (NSS) has named the Star*Stream© Hydroturbine. Using a design that eliminates nearly all of the shortfalls of conventional hydroturbines, the Star*Stream© Hydroturbine employs a new mechanical-to-electrical energy transfer hydro design that operates without lubrication of any kind, and does not introduce foreign chemicals or particulate matter from oil or drive shaft seal degradation into the hydro ecology. In its unique configuration, the Star*Stream© Hydroturbine is nearly environmentally inert, without the negative aspects caused by interrupting the ecological continuity, i.e., disruptions to sedimentation, water quality, habitat changes, human displacement, fish migration, etc., - while it ensures dramatically reduced timeframes to project completion. While a remarkable reduction in LCOE resulting from application of the Star*Stream© Hydroturbine technology has been the core achievement of the this effort, there have been numerous technological breakthroughs from the development effort.

  17. The essential value of projects in faculty development.

    PubMed

    Gusic, Maryellen E; Milner, Robert J; Tisdell, Elizabeth J; Taylor, Edward W; Quillen, David A; Thorndyke, Luanne E

    2010-09-01

    Projects--planned activities with specific goals and outcomes--have been used in faculty development programs to enhance participant learning and development. Projects have been employed most extensively in programs designed to develop faculty as educators. The authors review the literature and report the results of their 2008 study of the impact of projects within the Pennsylvania State University College of Medicine Junior Faculty Development Program, a comprehensive faculty development program. Using a mixed-methods approach, the products of project work, the academic productivity of program graduates, and the impact of projects on career development were analyzed. Faculty who achieved the most progress on their projects reported the highest number of academic products related to their project and the highest number of overall academic achievements. Faculty perceived that their project had three major effects on their professional development: production of a tangible outcome, development of a career focus, and development of relationships with mentors and peers. On the basis of these findings and a review of the literature, the authors conclude that projects are an essential element of a faculty development program. Projects provide a foundation for future academic success by enabling junior faculty to develop and hone knowledge and skills, identify a career focus and gain recognition within their community, generate scholarship, allocate time to academic work, and establish supportive relationships and collaborative networks. A list of best practices to successfully incorporate projects within faculty development programs is provided. PMID:20671538

  18. Quantifying Microbe-Mineral Interactions Leading to Remotely Detectable Induced Polarization Signals (Final Project Report)

    SciTech Connect

    Moysey, Stephen; Dean, Delphine; Dimitrios, Ntarlagiannis

    2013-11-13

    The objective of this project was to investigate controls on induced polarization responses in porous media. The approach taken in the project was to compare electrical measurements made on mineral surfaces with atomic force microscopy (AFM) techniques to observations made at the column-scale using traditional spectral induced polarization measurements. In the project we evaluated a number of techniques for investigating the surface properties of materials, including the development of a new AFM measurement protocol that utilizes an external electric field to induce grain-scale polarizations that can be probed using a charged AFM tip. The experiments we performed focused on idealized systems (i.e., glass beads and silica gel) where we could obtain the high degree of control needed to understand how changes in the pore environment, which are determined by biogeochemical controls in the subsurface, affect mechanisms contributing to complex electrical conductivity, i.e., conduction and polarization, responses. The studies we performed can be classified into those affecting the chemical versus physical properties of the grain surface and pore space. Chemical alterations of the surface focused on evaluating how changes in pore fluid pH and ionic composition control surface conduction. These were performed as column flow through experiments where the pore fluid was exchanged in a column of silica gel. Given that silica gel has a high surface area due to internal grain porosity, high-quality data could be obtained where the chemical influences on the surface are clearly apparent and qualitatively consistent with theories of grain (i.e., Stern layer) polarization controlled by electrostatic surface sorption processes (i.e., triple layer theory). Quantitative fitting of the results by existing process-based polarization models (e.g., Leroy et al., 2008) has been less successful, however, due to what we have attributed to differences between existing models developed for

  19. Lead Research and Development Activity for DOE's High Temperature, Low Relative Humidity Membrane Program (Topic 2)

    SciTech Connect

    James Fenton, PhD; Darlene Slattery, PhD; Nahid Mohajeri, PhD

    2012-09-05

    The Department of Energy’s High Temperature, Low Relative Humidity Membrane Program was begun in 2006 with the Florida Solar Energy Center (FSEC) as the lead organization. During the first three years of the program, FSEC was tasked with developing non-Nafion® proton exchange membranes with improved conductivity for fuel cells. Additionally, FSEC was responsible for developing protocols for the measurement of in-plane conductivity, providing conductivity measurements for the other funded teams, developing a method for through-plane conductivity and organizing and holding semiannual meetings of the High Temperature Membrane Working Group (HTMWG). The FSEC membrane research focused on the development of supported poly[perfluorosulfonic acid] (PFSA) – Teflon membranes and a hydrocarbon membrane, sulfonated poly(ether ether ketone). The fourth generation of the PFSA membrane (designated FSEC-4) came close to, but did not meet, the Go/No-Go milestone of 0.1 S/cm at 50% relative humidity at 120 °C. In-plane conductivity of membranes provided by the funded teams was measured and reported to the teams and DOE. Late in the third year of the program, DOE used this data and other factors to decide upon the teams to continue in the program. The teams that continued provided promising membranes to FSEC for development of membrane electrode assemblies (MEAs) that could be tested in an operating fuel cell. FSEC worked closely with each team to provide customized support. A logic flow chart was developed and discussed before MEA fabrication or any testing began. Of the five teams supported, by the end of the project, membranes from two of the teams were easily manufactured into MEAs and successfully characterized for performance. One of these teams exceeded performance targets, while the other requires further optimization. An additional team developed a membrane that shows great promise for significantly reducing membrane costs and increasing membrane lifetime.

  20. Development and preparation of lead-containing paint films and diagnostic test materials.

    PubMed

    Binstock, David; Gutknecht, William; Sorrell, Kristen; Haas, Curtis; Winstead, Wayne; McCombs, Michelle; Brown, Gordon; Salmons, Cynthia; Harper, Sharon L

    2012-05-01

    Lead in paint continues to be a threat to children's health in cities across the United States, which means there is an ongoing need for testing and analysis of paint. This ongoing analytical effort and especially development of new methods continue to drive the need for diagnostic testing materials that provide the analytical challenges of real-world paints. To this end, 31 different types of paint test materials were developed and prepared. Preparation of the materials included development of lead-containing paint films yielding an overall relative standard error for one individual test sample being less than 10%. The 31 diagnostic test materials prepared with these paint films included two lead pigments; lead concentrations from nominally 0 to 2.0 mg lead/cm(2) (0 to 5% lead by weight); overlayers of both "lead-free," oil-based and water-based paints; Al, Ba, and Mg as potential chemical interferents; red and black potential color interferents; and substrates of wood, metal, masonry, and plaster. These materials challenge each step in method development and evaluation, including paint sample collection and preparation, lead extraction, and measurement of solubilized lead. When the materials were used to test performance of a new lead-in-paint testing method based on extraction using a rotor/stator method and measurement using turbidimetry, the results agreed to within ±20% of the expected lead values for 30 out of 31 of the diagnostic test materials, thereby demonstrating their levels of quality and utility. PMID:22460838

  1. Plutonium immobilization project development and testing technical project office quality assurance program description

    SciTech Connect

    Gould, T H; MacLean, L M; Ziemba, J M

    1999-07-08

    The Plutonium Immobilization Project (PIP) is one of several fissile materials disposition projects managed by the Department of Energy (DOE) Office of Fissile Materials Disposition (OFMD). The PIP is expected to evolve from the current Development and Testing (D and T) effort, to design, to construction, and finally to operations. Overall management and technical management of the D and T effort resides at the Lead Laboratory, Lawrence Livermore National Laboratory (LLNL), through the LLNL Manager, Fissile Materials Disposition Program (FMDP). Day to day project activities are managed by the D and T Technical Project Office (TPO), which reports to the LLNL Manager, FMDP. The D and T TPO consists of the Technical Manager, the TPO Quality Assurance (QA) Program Manager, and TPO Planning and Support Staff. This Quality Assurance Program Description (QAPD) defines the QA policies and controls that will be implemented by these TPO personnel in their management of D and T activities. This QAPD is consistent with and responsive to the Department of Energy Fissile Materials Disposition Program Quality Assurance Requirements Document (FMDP QARD). As the Project and upper level requirement's documents evolve, this QAPD will be updated as necessary to accurately define and describe the QA Program and Management of the PIP. The TPO has a policy that all development and testing activities be planned, performed and assessed in accordance with its customer's requirements, needs and expectations, and with a commitment to excellence and continuous improvement. The TPO QAPD describes implementation requirements which, when completed, will ensure that the project development and testing activities conform to the appropriate QA requirements. For the program to be effective, the TPO QA Program Manager will ensure that each site participating in D and T activities has developed a QAPD, which meets the customer's requirements, and has a designated quality leader in place. These customer

  2. Projectizing the development and/or maintenance process for emergency response/contingency plans

    SciTech Connect

    A. A. Francis

    2000-07-01

    The attainment of established goals and objects is essential and paramount for all successful projects in business and industry, including the development and/or maintenance of emergency response/contingency plans. The need for effective project management is an ongoing effort. As with any aspect of business, better ways of managing projects have been and are being developed. Those organizations that take the lead in implementing these capabilities consistently perform their projects better, and in the case of emergency management, provide better protection to employees, property, and the environment.

  3. Developing Learning Strategies Based on Research Projects

    ERIC Educational Resources Information Center

    Ampuero-Canellas, Olga; Gonzalez-Del-Rio, Jimena; Jorda-Albinana, Begona; Rojas-Sola, Jose Ignacio

    2011-01-01

    Research projects are a very important part of any professor life sheet. Through these projects, they use their knowledge to solve real problems within professional area. Besides being an advance in research area, they can essentially contribute to improving teaching process. This work originates from the idea that the experienced gotten from…

  4. Development of an Industrial Engineering Project

    ERIC Educational Resources Information Center

    Moreno, Lorenzo; Gonzalez, Evelio; Acosta, Leopoldo; Toledo, Jonay; Marichal, Nicolas; Hamilton, Alberto; Sigut, Marta; Mendez, J. Albino; Hernandez, Sergio; Torres, Santiago

    2005-01-01

    This paper presents a teaching strategy of the scheduling and developmental phase of an Industrial Engineering computer project. It is based on a real project which has been carried out by our department in collaboration with a local company. The classroom setting provides an environment where students can experience firsthand all phases of the…

  5. Nutrition Education Today. A Curriculum Development Project.

    ERIC Educational Resources Information Center

    California State Dept. of Education, Sacramento.

    Nutrition Education Today is a state-funded curriculum project that addresses the behavioral aspects of nutrition as well as the nutritional knowledge of secondary school students in California. The curriculum design for the Nutrition Education Today project is a result of the efforts of a statewide task force of specialists in the area of…

  6. Projects Developed for Library Instruction within the Curriculum.

    ERIC Educational Resources Information Center

    Engeldinger, Eugene A., Comp.; Stevens, Barbara R., Comp.

    A general list of suggestions for effective library instruction and library instruction projects in a variety of disciplines are presented in this guide. Developed in a faculty and academic staff development seminar, the Library within the Curriculum Project, these projects illustrate diverse aproaches to library instruction with the common goal…

  7. Project management in the development of scientific software

    NASA Astrophysics Data System (ADS)

    Platz, Jochen

    1986-08-01

    This contribution is a rough outline of a comprehensive project management model for the development of software for scientific applications. The model was tested in the unique environment of the Siemens AG Corporate Research and Technology Division. Its focal points are the structuring of project content - the so-called phase organization, the project organization and the planning model used, and its particular applicability to innovative projects. The outline focuses largely on actual project management aspects rather than associated software engineering measures.

  8. The development of a new sealed bipolar lead-acid battery

    NASA Technical Reports Server (NTRS)

    Attia, A. I.; Rowlette, J. J.

    1988-01-01

    New light weight composite bipolar plates which can withstand the corrosive environment of the lead acid battery have made possible the construction of a sealed bipolar lead acid battery that promises to achieve very high specific power levels and substantially higher energy densities than conventional lead acid batteries. Performance projections based on preliminary experimental results show that the peak specific power of the battery can be as high as 90 kW/kg, and that a specific power of 5 kW/kg can be sustained over several thousand pulses.

  9. Project for Faculty Development Program Evaluation: Final Report.

    ERIC Educational Resources Information Center

    Blackburn, Robert T.; And Others

    The project of faculty development program evaluation, developed by the Center for the Study of Higher Education of the University of Michigan, is described. Project thrusts were: to develop assessment instruments for judging the success of faculty development programs; to provide formative and summative evaluation for the programs of the 24…

  10. Development status of a sealed bipolar lead/acid battery for high-power battery applications

    NASA Astrophysics Data System (ADS)

    Arias, J. L.; Rowlette, J. J.; Drake, E. D.

    A sealed bipolar lead/acid (SBLA) battery is being developed by Arias Research Associates (ARA) which will offer a number of important advantages in applications requiring high power densities. These applications include electric vehicles (EVs) and hybrid electric vehicles, uninterruptable power supplies (UPS), electrically-heated catalysts (EHCs) for automobiles, utility-power peak-shaving, and others. The advantages of the SBLA over other types of batteries will by significantly higher power density, together with good energy density, high cycle life, high voltage density, low production cost and zero maintenance. In addition, the lead/acid battery represents a technology which is familiar and accepted by Society, is recyclable within the existing infrastructure, and does not raise the safety concerns of many other new batteries (e.g., fire, explosion and toxic gases). This paper briefly reviews the basic design concepts and issues of the SBLA battery technology, various quasi-bipolar approaches and the results of ARA's development work during the past four years. Performance data are given based on both in-house and independent testing of ARA laboratory test batteries. In addition, performance projections and other characteristics are given for three ARA SBLA battery designs, which are compared with other batteries in three example applications: UPS, EHCs, and EVs. The most notable advantages of the SBLA battery are substantial reductions in product size and weight for the UPS, smaller packaging and longer life for the EHC, and higher vehicle performance and lower cost for the EV, compared to both existing and advanced EV batteries.

  11. Leiden University "astronomy for development" projects

    NASA Astrophysics Data System (ADS)

    Miley, George; Russo, Pedro

    2015-08-01

    We shall describe the projects being coordinated by Leiden Observatory to use astronomy for education and human capacity buiding and discuss how they relate to the IAU Strategic Plan. Some of these are being funded by the European Commission.

  12. Going and Passing through Community Colleges: Examining the Effectiveness of Project Lead The Way in STEM Pathways

    ERIC Educational Resources Information Center

    Starobin, Soko S.; Schenk, Tom, Jr.; Laanan, Frankie Santos; Rethwisch, David G.; Moeller, Darin

    2013-01-01

    Project Lead The Way (PLTW), which aims to create a seamless pathway from secondary education to college and career success in STEM fields, was first implemented in the state of Iowa in 2005. As a part of a statewide, longitudinal research in PLTW, this study explores the effectiveness of PLTW in college persistence by analyzing multiple data…

  13. Development of composite materials for non-leaded glove for use in radiological hand protection

    NASA Astrophysics Data System (ADS)

    Dodoo-Amoo, David Nii Amoo

    Lead is a hazardous material and US congress has mandated the rapid reduction of all hazardous waste generation as a matter of national policy. With the large amount of plutonium handling in numerous projects including the development of MOX fuel, power source etc., hand glove protection for the emitted alpha-beta- and low energy photons is an important issue. Leaded gloves are the prime shields used for radiological hand protection. US Department of Energy laboratories require a substitute material for the lead oxide in the gloves, as a way to reduced mixed waste. To solve this problem, a new blend of non-hazardous materials that have the same radiological properties, approximately the same cost of production, and lastly not potentially fall under the Resource Conservation and Recovery Act (RCRA) regulation, to replace the lead oxide currently used in the gloves had been investigated. The investigations have produced alternative materials using calculations (deterministic and Monte Carlo, MCNP) and experiments. The selection of the constituent compounds for the new composite materials, were based on the k-absorption edge energy of the main constituent element(s) in the compound. The formulations of these composites were fashioned on the principle of blending neoprene rubber formulation with several constituent compounds. Calculations based on the Lambert-Beer attenuation law together with the mass attenuation coefficient values from the XCOM cross section database program were used to determine the transmission fractions of these proposed composite materials. Selected composite materials that compared favorably with the leaded-neoprene were fabricated. These fabricated composite materials were tested with attenuation experiments and the results were in excellent agreement with the calculations using the Lambert-Beer law. For the purpose of benchmarking the result of the calculations, Monte Carlo calculations were also made. The success of this research would mean

  14. Effect of lead on fetal development in rats fed with 8% casein diet

    SciTech Connect

    Saxena, D.K.; Lal, B.; Chandra, S.V.

    1987-10-01

    Nutritional status is known to affect the susceptibility of humans and animals to chemical insult. Prevalence of protein malnutrition in developing countries and increasing reports of exposure to lead through environmental pollution have led us to investigate the embryotoxic and teratogenic effects of lead in pregnant rats maintained on low protein diet so as to asses the developmental toxicity of lead in protein malnourished state.

  15. Framework for Project Development in the Renewable Energy Sector

    SciTech Connect

    Springer, R.

    2013-02-01

    The concepts, descriptions, diagrams, and acronyms developed and described herein are meant to provide a contextual framework as well as a systematic, repeatable process to assist a potential project sponsor in understanding and navigating early-stage project development. Professional project developers will recognize these concepts and hold them as intuitive and even obvious, though the fundamentals of this specialized field are rarely written down and defined as they are here.

  16. 30 CFR 402.11 - Technology-development project applications.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false Technology-development project applications... RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Application, Evaluation, and Management Procedures § 402.11 Technology-development project applications. (a) Grant awards will be used...

  17. 30 CFR 402.11 - Technology-development project applications.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Technology-development project applications... RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Application, Evaluation, and Management Procedures § 402.11 Technology-development project applications. (a) Grant awards will be used...

  18. Phased project planning and development in anticipation of operational programs

    NASA Technical Reports Server (NTRS)

    Stroud, W. G.

    1973-01-01

    The impact of future operational status on the planning and execution of the research and development activities for major space flight projects is assessed. These projects, within NASA, are part of the Applications Program involving communications and meteorology. The NASA management approach to these projects is determined by national policies governing the responsibilities and relationships among the various government agencies and private industries.

  19. Women and Development: Three Experimental Projects

    ERIC Educational Resources Information Center

    Clason, Carla

    1975-01-01

    A review of three experimental projects implemented by Unesco in the late 1960's to improve the status and equal educational opportunities of women includes: (1) Upper Volta, education for rural women; (2) Nepal, training primary school teachers; and (3) Chile, access of women to technical education. (LH)

  20. North Carolina Manpower Development Corporation Mobility Project.

    ERIC Educational Resources Information Center

    North Carolina Manpower Development Corp., Chapel Hill.

    The purpose of the project was to determine the feasibility of matching severely rural disadvantaged persons in the mountains and coastal plains with full-time employment in the Piedmont area by means of relocation assistance. Farm families with incomes of $1200 or less, workers discharged for no fault of their own, and workers unemployed for six…

  1. Executive summaries of reports leading to the construction of the Baca Geothermal Demonstration Project

    SciTech Connect

    Sherwood, P.B.; Newman, K.L.; Westermeier, J.F.; Giroux, H.D.; Lowe, G.D.; Nienberg, M.W.

    1980-05-01

    Executive summaries have been written for 61 reports and compilations of data which, in part, have led to the construction of the Baca 50 MW Geothermal Demonstration Project (GDP). The reports and data include environmental research, reservoir and feasibility studies, the project proposal to DOE and the Final Environmental Impact Statement. These executive summaries are intended to give the reader a general overview of each report prior to requesting the report from the GDP Data Manager.

  2. Executive summaries of reports leading to the construction of the Baca Geothermal Demonstration Project

    SciTech Connect

    Sherwood, P.B.; Newman, K.L.; Westermeier, J.F.; Giroux, H.D.; Lowe, G.D.; Nienberg, M.W.

    1980-05-01

    Executive summaries have been written for 61 reports and compilations of data which in part, have led to the construction of the Baca 50 MW Geothermal Demonstration Project (GDP). The reports and data include environmental research, reservoir and feasibility studies, the project proposal to DOE and the Final Environmental Impact Statement. These executive summaries are intended to give the reader a general overview of each report prior to requesting the report from the GDP Data Manager.

  3. Principal's Desirability for Professional Development in Competencies Related to Leading Special Education Programs

    ERIC Educational Resources Information Center

    Pontius, Nicholas Frantz

    2010-01-01

    The purpose of this study was to determine the perceptions of public school principals within the Commonwealth of Virginia as to their desirability for professional development in leading special education programs within their schools. Given a list of 18 competencies related to leading special education principals rated their desirability for…

  4. A Project Management Approach to Using Simulation for Cost Estimation on Large, Complex Software Development Projects

    NASA Technical Reports Server (NTRS)

    Mizell, Carolyn; Malone, Linda

    2007-01-01

    It is very difficult for project managers to develop accurate cost and schedule estimates for large, complex software development projects. None of the approaches or tools available today can estimate the true cost of software with any high degree of accuracy early in a project. This paper provides an approach that utilizes a software development process simulation model that considers and conveys the level of uncertainty that exists when developing an initial estimate. A NASA project will be analyzed using simulation and data from the Software Engineering Laboratory to show the benefits of such an approach.

  5. LEAD SAFE YARDS: DEVELOPING AND IMPLEMENTING A MONITORING, ASSESSMENT, AND OUTREACH PROGRAM FOR YOUR COMMUNITY

    EPA Science Inventory

    The USEPA has developed a technology transfer handbook on how to plan and implement a residential soil lead monitoring, assessment, mitigation and outreach program for residential communities. The handbook provides guidance on 1) identifying potentially impacted communities, 2) c...

  6. Trailing edges projected to move faster than leading edges for large pelagic fish habitats under climate change

    NASA Astrophysics Data System (ADS)

    Robinson, L. M.; Hobday, A. J.; Possingham, H. P.; Richardson, A. J.

    2015-03-01

    There is mounting evidence to suggest that many species are shifting their ranges in concordance with the climate velocity of their preferred environmental conditions/habitat. While accelerated rates in species' range shifts have been noted in areas of intense warming, due to climate change, few studies have considered the influence that both spatial temperature gradients and rates of warming (i.e., the two components of climate velocity) could have on rates of movement in species habitats. We compared projected shifts in the core habitat of nine large pelagic fish species (five tuna, two billfish and two shark species) off the east coast of Australia at different spatial points (centre, leading and trailing edges of the core habitat), during different seasons (summer and winter), in the near-(2030) and long-term (2070), using independent species distribution models and habitat suitability models. Model projections incorporated depth integrated temperature data from 11 climate models with a focus on the IPCC SRES A2 general emission scenario. Projections showed a number of consistent patterns: southern (poleward) shifts in all species' core habitats; trailing edges shifted faster than leading edges; shifts were faster by 2070 than 2030; and there was little difference in shifts among species and between seasons. Averaging across all species and climate models, rates of habitat shifts for 2030 were 45-60 km decade-1 at the trailing edge, 40-45 km decade-1 at the centre, and 20-30 km decade-1 at the leading edge. Habitat shifts for 2070 were 60-70 km decade-1 at the trailing edge, 50-55 km decade-1 at the centre, and 30-40 km decade-1 at the leading edge. It is often assumed that the leading edge of a species range will shift faster than the trailing edge, but there are few projections or observations in large pelagic fish to validate this assumption. We found that projected shifts at the trailing edge were greater than at the centre and leading of core habitats in

  7. Integrating HCI Specialists into Open Source Software Development Projects

    NASA Astrophysics Data System (ADS)

    Hedberg, Henrik; Iivari, Netta

    Typical open source software (OSS) development projects are organized around technically talented developers, whose communication is based on technical aspects and source code. Decision-making power is gained through proven competence and activity in the project, and non-technical end-user opinions are too many times neglected. In addition, also human-computer interaction (HCI) specialists have encountered difficulties in trying to participate in OSS projects, because there seems to be no clear authority and responsibility for them. In this paper, based on HCI and OSS literature, we introduce an extended OSS development project organization model that adds a new level of communication and roles for attending human aspects of software. The proposed model makes the existence of HCI specialists visible in the projects, and promotes interaction between developers and the HCI specialists in the course of a project.

  8. Does University Campus Experience Develop Motivation to Lead or Readiness to Lead among Undergraduate Students? "A Malaysian Perspective"

    ERIC Educational Resources Information Center

    Hamid, Jamaliah Abdul; Krauss, Steven E.

    2013-01-01

    Do students' experiences on university campuses cultivate motivation to lead or a sense of readiness to lead that does not necessarily translate to active leadership? To address this question, a study was conducted with 369 undergraduates from Malaysia. Campus experience was more predictive of leadership readiness than motivation. Student…

  9. EMSP project summary (Project ID: 60077): Development of nuclear analysis capabilities for DOE waste management activities

    SciTech Connect

    Parks, C.V.; Rearden, B.T.; DeHart, M.D.; Broadhead, B.L.; Hopper, C.M.; Petrie, L.M.

    2000-02-01

    The objective of this project is to develop and demonstrate prototypical analysis capabilities that can be used by nuclear safety analysis practitioners to: (1) demonstrate a more thorough understanding of the underlying physics phenomena that can lead to improved reliability and defensibility of safety evaluations; and (2) optimize operations related to the handling, storage, transportation, and disposal of fissile material and DOE spent fuel. To address these problems, this project has been investigating the implementation of sensitivity and uncertainty methods within existing Monte Carlo codes used for criticality safety analyses. It is also investigating the use of a new deterministic code that allows for specification of arbitrary grids to accurately model geometric details required in a criticality safety analysis. This capability can facilitate improved estimations of the required subcritical margin and potentially enable the use of a broader range of experiments in the validation process. The new arbitrary-grid radiation transport code will also enable detailed geometric modeling valuable for improved accuracy in application to a myriad of other problems related to waste characterization. Application to these problems will also be explored.

  10. Final report for the protocol extensions for ATM Security Laboratory Directed Research and Development Project

    SciTech Connect

    Tarman, T.D.; Pierson, L.G.; Brenkosh, J.P.

    1996-03-01

    This is the summary report for the Protocol Extensions for Asynchronous Transfer Mode project, funded under Sandia`s Laboratory Directed Research and Development program. During this one-year effort, techniques were examined for integrating security enhancements within standard ATM protocols, and mechanisms were developed to validate these techniques and to provide a basic set of ATM security assurances. Based on our experience during this project, recommendations were presented to the ATM Forum (a world-wide consortium of ATM product developers, service providers, and users) to assist with the development of security-related enhancements to their ATM specifications. As a result of this project, Sandia has taken a leading role in the formation of the ATM Forum`s Security Working Group, and has gained valuable alliances and leading-edge experience with emerging ATM security technologies and protocols.

  11. Relationship among maternal blood lead, ALAD gene polymorphism and neonatal neurobehavioral development

    PubMed Central

    Yun, Li; Zhang, Weixing; Qin, Kejun

    2015-01-01

    Lead is a widely used heavy metal that can affect children’s nervous system development. ALAD gene polymorphism is associated with lead neurotoxicity. This study aimed to clarify the relationship among maternal blood lead, ALAD gene polymorphism, and neonatal neurobehavioral development through detecting maternal blood lead and ALAD gene polymorphism. 198 maternal and neonatal were selected as the research object. Graphite furnace atomic absorption method was applied to detect the maternal blood lead concentration. PCR-RFLP was used to detect ALAD genotype distribution. Neonatal NANB score was treated as effect indicator. SPSS was used for statistical analysis. The ALAD genotype was 181 cases (91.4%) for ALAD11 and 17 cases (8.6%) for ALAD12. ALAD allele frequency distribution accords with genetics Hardy-Weinberg balance (P > 0.05). Blood lead level in maternal with ALAD12 genotype was significantly higher than with ALAD11 genotype (P < 0.01). NANB score in high blood lead neonatal group was obviously lower than the low blood lead group (P < 0.05). Newborn’s NANB score from the maternal with ALAD11 genotype was lower than from the maternal with ALAD12 genotype (P < 0.01). After ruling out the confounding factors influence by multiple linear regressions, ALAD gene polymorphisms had no significant correlation with neonatal NANB score (P > 0.05). ALAD gene polymorphism is associated with the blood lead level. Low level lead exposure in utero may cause newborn early neurobehavioral maldevelopment. Maternal ALAD gene polymorphism can affect early neonatal neurobehavioral development by influencing the blood lead level. PMID:26261627

  12. Environmental impact assessment of the Dulang oilfield development project

    SciTech Connect

    Hasan, M.N. ); ))

    1988-01-01

    The authors discuss an environmental impact assessment (EIA) of the Dulang Oilfield Development Project, conducted to determine whether the project could proceed in a safe and environmentally acceptable manner. This is the first EIA for an offshore oilfield in Malaysian waters, and was conducted in anticipation of the Environmental Quality (Prescribed Activities) (Environmental Impact Assessment Order(1987)) which requires an EIA to be conducted for major oil and gas field development projects.

  13. ALASKA OIL AND GAS EXPLORATION, DEVELOPMENT, AND PERMITTING PROJECT

    SciTech Connect

    Richard McMahon; Robert Crandall; Chas Dense; Sean Weems

    2003-11-19

    This is the second technical report, covering the period from April 1, 2003 through September 30, 2003. This project brings together three parts of the oil exploration, development, and permitting process to form the foundation for a more fully integrated information technology infrastructure for the State of Alaska. The geo-technical component is a shared effort between the State Department of Administration and the US Department of Energy. The Alaska Oil and Gas Conservation Commission is rapidly converting high volumes of paper documents and geo-technical information to formats suitable for search and retrieval over the Internet. The permitting component is under the lead of the DNR Office of Project Management and Permitting. A web-based system will enable the public and other review participants to track permit status, submit and view comments, and obtain important project information on-line. By automating several functions of the current manual process, permit applications will be completed more quickly and accurately, and agencies will be able to complete reviews with fewer delays. Structural changes are taking place in terms of organization, statutory authority, and regulatory requirements. Geographic Information Systems are a central component to the organization of information, and the delivery of on-line services. Progress has been made to deploy the foundation system for the shared GIS based on open GIS protocols to the extent feasible. Alaska has nearly one-quarter of the nation's supply of crude oil, at least five billion barrels of proven reserves. The American Association of Petroleum Geologists report that the 1995 National Assessment identified the North Slope as having 7.4 billion barrels of technically recoverable oil and over 63 trillion cubic feet of natural gas. From these reserves, Alaska produces roughly one-fifth of the nation's daily crude oil production, or approximately one million barrels per day from over 1,800 active wells.

  14. Faculty Development in Nursing Education Project. A Report.

    ERIC Educational Resources Information Center

    Southern Regional Education Board, Atlanta, GA.

    This report describes some of the initial plans, activities, and opinions of southern nursing school faculty selected to participate in the Faculty Development in Nursing Education Project (FDN). Section 1 states that the project's overall objectives are to improve and to develop the teaching skills of nurse educators in meeting the needs of…

  15. Quality Assurance Project Plan For Verification of ANDalyze Lead100 Test Kit and AND1000 Fluorimeter

    EPA Science Inventory

    Lead (Pb) is a naturally occurring metal in the aquatic environment; however, most Pb contamination of concern arises from anthropogenic sources (such as deposition of Pb dust from combustion processes in natural waterways or due to its use in plumbing materials). Although Pb is...

  16. FIELD DEMONSTRATION OF LEAD-BASED PAINT REMOVAL AND INORGANIC STABILIZATION TECHNOLOGIES - PROJECT SUMMARY

    EPA Science Inventory

    A study was conducted to demonstrate the effectiveness of a wet abrasive blasting technology to remove lead-based paint from exterior wood siding and brick substrates, and the effectiveness of two Best Demonstrated Available Technologies (BDAT) to stabilize the resultant blasting...

  17. Process development status report for advanced manufacturing projects

    SciTech Connect

    Brinkman, J.R.; Homan, D.A.

    1990-03-30

    This is the final status report for the approved Advanced Manufacturing Projects for FY 1989. Five of the projects were begun in FY 1987, one in FY 1988, and one in FY 1989. The approved projects cover technology areas in welding, explosive material processing and evaluation, ion implantation, and automated manufacturing. It is expected that the successful completion of these projects well result in improved quality and/or reduced cost for components produced by Mound. Those projects not brought to completion will be continued under Process development in FY 1990.

  18. Project Plan: The MEDARP Documentation Unit to the School Improvement and Local School Development Projects.

    ERIC Educational Resources Information Center

    New York City Board of Education, Brooklyn, NY. Office of Educational Evaluation.

    The Metropolitan Educational Development and Research Project (MEDARP) Documentation Unit, located in the Office of Educational Evaluation (OEE) at the New York City Board of Education, is funded by the Ford Foundation to document, evaluate and provide technical assistance to the School Improvement and Local School Development Projects; these are…

  19. An overview of the development of lead/acid traction batteries for electric vehicles in India

    NASA Astrophysics Data System (ADS)

    Sivaramaiah, G.; Subramanian, V. R.

    Electric vehicles (EVs) made an entry into the Indian scene quite recently in the area of passenger transportation, milk floats and other similar applications. The industrial EV market, with various models of fork-lift trucks and platform trucks already in wide use all over India, is a better understood application of EV batteries. The lead/acid traction batteries available in India are not of high-energy density. The best available indigenous lead/acid traction battery has an energy density ( C/5 rate) of 30 W h kg -1 as against 39 W h kg -1 available abroad. This paper reviews the developmental efforts relating to lead/acid traction batteries for electric vehicle applications in India, such as prototype road vehicles, commercial vehicles, rail cars, and locomotives. Due to the need for environmental protection and recognition of exhaustible, finite supplies of petroleum fuel, the Indian government is presently taking active interest in EV projects.

  20. RNA-seq analysis of developing olfactory bulb projection neurons.

    PubMed

    Kawasawa, Yuka Imamura; Salzberg, Anna C; Li, Mingfeng; Šestan, Nenad; Greer, Charles A; Imamura, Fumiaki

    2016-07-01

    Transmission of olfactory information to higher brain regions is mediated by olfactory bulb (OB) projection neurons, the mitral and tufted cells. Although mitral/tufted cells are often characterized as the OB counterpart of cortical projection neurons (also known as pyramidal neurons), they possess several unique morphological characteristics and project specifically to the olfactory cortices. Moreover, the molecular networks contributing to the generation of mitral/tufted cells during development are largely unknown. To understand the developmental patterns of gene expression in mitral/tufted cells in the OB, we performed transcriptome analyses targeting purified OB projection neurons at different developmental time points with next-generation RNA sequencing (RNA-seq). Through these analyses, we found 1202 protein-coding genes that are temporally differentially-regulated in developing projection neurons. Among them, 388 genes temporally changed their expression level only in projection neurons. The data provide useful resource to study the molecular mechanisms regulating development of mitral/tufted cells. We further compared the gene expression profiles of developing mitral/tufted cells with those of three cortical projection neuron subtypes, subcerebral projection neurons, corticothalamic projection neurons, and callosal projection neurons, and found that the molecular signature of developing olfactory projection neuron bears resemblance to that of subcerebral neurons. We also identified 3422 events that change the ratio of splicing isoforms in mitral/tufted cells during maturation. Interestingly, several genes expressed a novel isoform not previously reported. These results provide us with a broad perspective of the molecular networks underlying the development of OB projection neurons. PMID:27073125

  1. The Leading Edge: A Career Development Workshop Series for Young Adults. Facilitator Guide.

    ERIC Educational Resources Information Center

    Canadian Career Development Foundation, Ottawa (Ontario).

    This booklet is designed to be used by facilitators of the Canadian Career Development Foundation's "The Leading Edge: A Career Development Workshop Series for Young Adults." The guide provides information, including objectives of the workshops and lists of required materials, needed in order to facilitate an introductory session as well as the…

  2. Imaginative, Child-Directed Play: Leading the Way in Development and Learning.

    ERIC Educational Resources Information Center

    Bodrova, Elena; Leong, Deborah J.; Hensen, Ruth; Henninger, Maddie

    2000-01-01

    Describes Vygotsky' view of play and its contribution to children's development. Presents developmental paths of play, focusing on the development of imaginary situations, explicit roles, and implicit rules. Describes how play leads to literacy and supports self-regulation, and ways early childhood teachers can facilitate play through promoting…

  3. Leading the Development of Our New Nursing Information System with the TIGER-Based Taiwan Model.

    PubMed

    Shi, Zhenxian; Li, Lin; Kuo, Ming-Chuan; Chang, Polun

    2016-01-01

    Our nursing information system has been incomplete and not very reliable. The situation is not changed because our IT department is seriously understaffed and the HIS vendor is weak. We decided to take the responsibility to lead the development of our NIS using the Taiwan model to develop our TIGER-based new strategies. PMID:27332373

  4. Epigenesis: The Natural Development of Family Crises Leading to the Hospitalization of Adolescents

    ERIC Educational Resources Information Center

    Howes, Karen

    1976-01-01

    Epigenesis, or natural development, of family crisis, is a phenomenon visible in all families. This paper analyzes three families from an epigenetic viewpoint, illustrating that the natural development of family crises leads to hospitalization or symptom eruptions only when the family deals with the crisis in an ineffective or pathological manner.…

  5. Development and implementation of the Saskatchewan Leadership Program: Leading for healthcare transformation.

    PubMed

    Mutwiri, Betty; Witt, Christine; Denysek, Christina; Halferdahl, Susan; McLeod, Katherine M

    2016-01-01

    The Saskatchewan Leadership Program (SLP) was developed based on the LEADS framework and aligned with Lean management to build leadership renewal and sustainability conducive to transformational change in the Saskatchewan health system. This article describes the development, implementation, and evaluation of the SLP, including experiences and lessons learned. PMID:26656387

  6. Middle Childhood: 4-H Child Development Project.

    ERIC Educational Resources Information Center

    Francis, Connie M.

    Part of a series for 4-H members between 9 and 19 years of age, this age-graded guide to the development of 6-, 7-, and 8-year-olds aims to help 4-H members who are children and adolescents themselves: (1) understand the physical, mental, social, and emotional development of children in middle childhood; (2) learn to care for a child in middle…

  7. Neurochemical and neurobehavioral effects of low lead exposure on the developing brain.

    PubMed

    Bijoor, Anita R; Sudha, S; Venkatesh, T

    2012-04-01

    Lead is found in small but appreciable quantities in air, soil drinking water and food. Exposure to such amounts of lead does not cause acute lead toxicity, but produces subtle effects, particularly in children. The CDC advocates "safe" or "acceptable" levels of blood lead up to 10 μg/dl, while OSHA declares blood lead levels up to 40 μg/dl as "safe" or "acceptable" in the occupationally exposed. The objective of the study was to see if blood levels considered "safe" can cause changes in the biogenic neurotransmitters in the developing brain which may cause neurobehavioral defects like hyperactivity and other cognitive disorders. Albino Wistar rats were divided into the control and lead-treated groups. The control group was given unleaded water, while the lead-treated group was fed with 50 ppm lead acetate in drinking water. On day 45 the animals were subjected to a passive avoidance test, their blood analysed for ZPP and lead. They were then sacrificed and the neurotransmitters-Norepinephrine (NE) and its metabolite-methoxyhydroxyphenylglycol (MHPG) estimated in the brain areas associated with learning and memory-the frontal cortex, hippocampus and the striatum by HPLC-ECD. Our results showed significant increases in blood lead, NE and MHPG, while ZPP increase was insignificant. The rats showed neurobehavioral abnormalities as assessed by the passive avoidance test. We concluded that low blood levels of lead cannot be considered "safe" or "acceptable" as it causes neurotransmitter alterations. Increased NE turnover is implicated in hyperactivity disorders such as ADHD and Tourette syndrome. PMID:23543765

  8. Impact of senior design project for the development of leadership and management skills in construction management

    NASA Astrophysics Data System (ADS)

    Chowdhury, Tamara

    2013-08-01

    Senior design courses are a core part of curricula across engineering and technology disciplines. Such courses offer Construction Management (CMG) students the opportunity to bring together, assimilate and apply the knowledge they have acquired over their entire undergraduate academic programme to an applied technical project. Senior or Capstone design course engages students in a real-world project, enhance leadership development, and prepare to manage and lead project teams. The CMG programme's multidisciplinary approach at Alabama A&M University, combines essential components of construction techniques with concepts of business management to develop technically qualified individuals for responsible management roles in the design, construction and operation of major construction projects. This paper analyses the performance of the students and improvement due to the interaction with the faculty advisors and industrial panel during the two semester Capstone project. The results of this Capstone sequence have shown a continuous improvement of student performance.

  9. Solar electric thermal hydronic (SETH) product development project

    SciTech Connect

    Stickney, B.L.; Sindelar, A.

    2000-10-01

    Positive Energy, Inc. received a second Technology Maturation and Commercialization Project Subcontract during the 1999 round of awards. This Subcontract is for the purpose of further aiding Positive Energy, Inc. in preparing its Solar Electric Thermal Hydronic (SETH) control and distribution package for market introduction. All items of this subcontracted project have been successfully completed. This Project Report contains a summary of the progress made during the SETH Development Project (the Project) over the duration of the 1999 Subcontract. It includes a description of the effort performed and the results obtained in the pursuit of intellectual property protection and development of product documentation for the end users. This report also summarizes additional efforts taken by and for the SETH project outside of the Subcontract. It presents a chronology of activities over the duration of the Subcontract, and includes a few selected sample copies of documents offered as evidence of their success.

  10. The Leading Edge 250: Oblique wing aircraft configuration project, volume 4

    NASA Technical Reports Server (NTRS)

    Schmidt, Andre; Moore, Peri; Nguyen, Dan; Oganesyan, Petros; Palmer, Charles

    1988-01-01

    The design of a high speed transport aircraft using the oblique wing concept as a part of the High Speed Civil Transport (HSCT) aircraft study is the Leading Edge 250 capable of travelling at Mach 4 with 250 passengers and has a 6,500 nautical mile range. Its innovation lies within its use of the unconventional oblique wing to provide efficient flight at any Mach number. Wave drag is kept to a minimum at high speed, while high lift is attained during critical takeoff and landing maneuvers by varying the sweep of the wing.

  11. Developing Multiple Literacies in a Website Project

    ERIC Educational Resources Information Center

    Spence, Lucy K.

    2009-01-01

    Jacky, an 11-year-old biliterate Latina, was the subject of this case study. She used her home funds of knowledge to become computer literate through the development of a website focused on Mexican heritage. The website, created via funds of knowledge drawn from the community, in turn involved families and the local community in computer…

  12. NEW DEVELOPMENTS IN EMISSION PROJECTION METHODOLOGIES

    EPA Science Inventory

    The paper describes the scope of an EPA research program to develop the Economic Growth Analysis System (EGAS) that will be operated to provide economic inputs for EPA's Regional Oxidant Model (ROM) and Urban Airshed Model (UAM). The Clean Air Act requires states to reduce ozone ...

  13. Stacks Tour Project Presents Staff Development Opportunity

    ERIC Educational Resources Information Center

    Coopey, Barbara M.; Nicastro, David

    2007-01-01

    The Penn State Libraries' Open House activities for incoming students find Access Services staff extending beyond their everyday routines to creatively help relieve students' fears of the library and understand how Access Services can help them. Serving on the Access Services Open House Committee offers staff many opportunities for development as…

  14. Aquantis Ocean Current Turbine Development Project Report

    SciTech Connect

    Fleming, Alex J.

    2014-08-23

    The Aquantis® Current Plane (“C-Plane”) technology developed by Dehlsen Associates, LLC (DA) and Aquantis, Inc. is an ocean current turbine designed to extract kinetic energy from ocean currents. The technology is capable of achieving competitively priced base-load, continuous, and reliable power generation from a source of renewable energy not before possible in this scale or form.

  15. The Preschooler: 4-H Child Development Project.

    ERIC Educational Resources Information Center

    Francis, Connie M.

    Intended for 4-H participants who plan and implement activities in the area of child development, this booklet provides a study guide to help young learners: (1) gain understanding of a preschool child's physical, mental, social, and emotional growth; (2) learn to care for a preschooler and promote preschoolers' feelings of security and safety;…

  16. [Contribution to the development of political-pedagogical nursing projects].

    PubMed

    Saupe, R; Alves, E D

    2000-04-01

    Based on the concepts of project and political-pedagogic project, authors presented a proposal for the development of such a project. The framework includes: the reference, the philosophy, the concept and the structure. The reference is the starting point, meaning the knowledge and critical view of reality; the philosophy represents the faith and the community's values involved in the project; the concept represents the theory that gives support to the proposal; and, finally the structure establishes the competences and the profile of the professional to be formed as well as the methodologic option for the organization and development of courses and disciplines. The Habermas' theory of communicative action is proposed as a methodology for the development of projects. PMID:11075146

  17. Renewable Energy Feasibility Study Leading to Development of the Native Spirit Solar Energy Facility

    SciTech Connect

    Carolyn Stewart; Tracey LeBeau

    2008-01-31

    DOE-funded renewable energy feasibility study conducted by Red Mountain Tribal Energy on behalf of the Southwest Tribal Energy Consortium (SWTEC). During the course of the study, SWTEC members considered multiple options for the organization structure, selected a proposed organization structure, and drafted a Memorandum of Understanding for the SWTEC organization. High-level resource assessments for SWTEC members were completed; surveys were developed and completed to determine each member’s interest in multiple participation options, including on-reservation projects. With the survey inputs in mind, multiple energy project options were identified and evaluated on a high-level basis. That process led to a narrowing of the field of technology options to solar generation, specifically, utility-scale Concentrating Solar-Powered Generation projects, with a specific, tentative project location identified at the Fort Mojave Indian Reservation -- the Native Spirit Solar Energy Facility.

  18. The Guelph Rural Development Outreach Project: A Canadian Experience.

    ERIC Educational Resources Information Center

    Findlay, E. Weldon; And Others

    The University of Guelph Rural Development Outreach Project (RDOP) as it was conceived, organized and utilized in rural communities in Ontario is the major focus of this document; the concluding sections describe some of the problems of Outreach implementation and suggest some possible courses for continuing and expanding the project. There is…

  19. Developing a European Practitioner Qualification: The TRAVORS2 Project

    ERIC Educational Resources Information Center

    Lester, Stan

    2013-01-01

    The TRAVORS projects, supported by the European Union's Lifelong Learning Programme, ran between 2008 and 2012. Their object was to develop training programmes for disability employment practitioners across nine countries based on proven approaches both to vocational rehabilitation and to skills training. The second of the two projects aimed…

  20. Tech Prep Intergenerational Curriculum Development Project. Final Report.

    ERIC Educational Resources Information Center

    Texas Tech Univ., Lubbock.

    A project was conducted at Texas Tech University to develop a competency-based curriculum to support statewide implementation of tech prep intergenerational programs (careers in providing services to well elderly persons and to children). Project activities included the following: (1) revision and expansion of the Intergenerational Target…

  1. Teachers' Learning in a Research and Development Work Project

    ERIC Educational Resources Information Center

    Postholm, May Britt

    2011-01-01

    This article focuses on teachers' learning in a research and development (R&D) work project. The teachers are working in a lower secondary school, and the cooperation between them and the researcher lasted for two years. The aim of this article is to show what teachers can learn and how they can learn during such a project. In the qualitative…

  2. Science and Engineering Technician Curriculum Development Project. Final Report.

    ERIC Educational Resources Information Center

    Mowery, Donald R.; Wolf, Lawrence J.

    Project SET (Science and Engineering for Technicians) developed a series of study guides designed to teach generic science and engineering skills to students interested in becoming technicians. An entire 2-year curriculum is encompassed by these guides, geared for 2-year college students. Described in this final report are the project's rationale,…

  3. A Systems Development Life Cycle Project for the AIS Class

    ERIC Educational Resources Information Center

    Wang, Ting J.; Saemann, Georgia; Du, Hui

    2007-01-01

    The Systems Development Life Cycle (SDLC) project was designed for use by an accounting information systems (AIS) class. Along the tasks in the SDLC, this project integrates students' knowledge of transaction and business processes, systems documentation techniques, relational database concepts, and hands-on skills in relational database use.…

  4. Open Crowdsourcing: Leveraging Community Software Developers for IT Projects

    ERIC Educational Resources Information Center

    Phair, Derek

    2012-01-01

    This qualitative exploratory single-case study was designed to examine and understand the use of volunteer community participants as software developers and other project related roles, such as testers, in completing a web-based application project by a non-profit organization. This study analyzed the strategic decision to engage crowd…

  5. QFD Application to a Software - Intensive System Development Project

    NASA Technical Reports Server (NTRS)

    Tran, T. L.

    1996-01-01

    This paper describes the use of Quality Function Deployment (QFD), adapted to requirements engineering for a software-intensive system development project, and sysnthesizes the lessons learned from the application of QFD to the Network Control System (NCS) pre-project of the Deep Space Network.

  6. Guidance and Control Software Project Data - Volume 2: Development Documents

    NASA Technical Reports Server (NTRS)

    Hayhurst, Kelly J. (Editor)

    2008-01-01

    The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes the development documents from the GCS project. Volume 2 contains three appendices: A. Guidance and Control Software Development Specification; B. Design Description for the Pluto Implementation of the Guidance and Control Software; and C. Source Code for the Pluto Implementation of the Guidance and Control Software

  7. Faculty Development for Institutional Change: Lessons from an Advance Project

    ERIC Educational Resources Information Center

    Laursen, Sandra; Rocque, Bill

    2009-01-01

    The ADVANCE Institutional Transformation projects are remarkably diverse in their theories of action and choice of strategies. However, faculty development plays a role in many, and it was the central change strategy chosen by Leadership Education for Advancement and Promotion (LEAP), the 2002-2008 ADVANCE project at the University of Colorado at…

  8. Biphasic P wave in inferior leads and the development of atrial fibrillation

    PubMed Central

    Hayashi, Hideki; Horie, Minoru

    2015-01-01

    Background Anisotropic and slow conduction in the atrium underlie the development of atrial fibrillation (AF). This study aimed to investigate the P wave characteristics associated with the development of AF in patients with a biphasic P wave in the inferior leads. Methods Digital analysis of retrospectively recorded 12-lead electrocardiograms was performed to select patients with a biphasic P wave (positive/negative) in lead II from a database of 114,334 patients. Characteristics of the P wave in the inferior leads associated with incidence of AF were determined. Receiver operating characteristic curves dichotomized P wave variables were measured in each lead. Results A total of 141 patients (77 men; mean age, 64±19 years) were enrolled in this study. Twenty-nine (20.6%) patients developed AF (AF group) vs. 112 (79.6%) who did not (non-AF group) during a follow-up period of 50±62 months. The amplitude of the initial P wave portion in lead II was significantly larger in the AF group when compared with the non-AF group (77.3±77.0 µV vs. 51.0±30.1 µV, p=0.003), while the amplitude of the terminal P wave portion in lead III was significantly decreased in the AF group when compared with the non-AF group (−70.6±41.3 µV vs. −89.1±38.1 µV, p=0.024). The duration of the initial P wave portion in lead III was significantly longer in the AF group when compared with the non-AF group (52.7±34.6 ms vs. 35.8±30.4 ms, p=0.011). Multivariate Cox proportional-hazards analysis confirmed that the increased duration of the initial P wave portion in lead III (≥71 ms) was independently associated with AF development (hazard ratio 2.90, 95% confidence interval 1.16–7.11, p=0.02). Conclusion The analyses of the biphasic P wave in the inferior leads suggest that the development of AF could be attributed to increased atrial slow conduction. PMID:26702318

  9. Overview of NASA's Thermal Control System Development for Exploration Project

    NASA Technical Reports Server (NTRS)

    Stephan, Ryan A.

    2010-01-01

    NASA's Constellation Program includes the Orion, Altair, and Lunar Surface Systems project offices. The first two elements, Orion and Altair, are manned space vehicles while the third element is broader and includes several sub-elements including Rovers and a Lunar Habitat. The upcoming planned missions involving these systems and vehicles include several risks and design challenges. Due to the unique thermal environment, many of these risks and challenges are associated with the vehicles' thermal control system. NASA's Exploration Systems Mission Directorate (ESMD) includes the Exploration Technology Development Program (ETDP). ETDP consists of several technology development projects. The project chartered with mitigating the aforementioned risks and design challenges is the Thermal Control System Development for Exploration Project. The risks and design challenges are addressed through a rigorous technology development process that culminates with an integrated thermal control system test. The resulting hardware typically has a Technology Readiness Level (TRL) of six. This paper summarizes the development efforts being performed by the technology development project. The development efforts involve heat acquisition and heat rejection hardware including radiators, heat exchangers, and evaporators. The project has also been developing advanced phase change material heat sinks and performing assessments for thermal control system fluids.

  10. Advanced Software Development Workstation Project, phase 3

    NASA Technical Reports Server (NTRS)

    1991-01-01

    ACCESS provides a generic capability to develop software information system applications which are explicitly intended to facilitate software reuse. In addition, it provides the capability to retrofit existing large applications with a user friendly front end for preparation of input streams in a way that will reduce required training time, improve the productivity even of experienced users, and increase accuracy. Current and past work shows that ACCESS will be scalable to much larger object bases.

  11. Drug Development Value Chain Constructed by Collaboration Between The SOSHO Project and The NPO BIOGRID

    NASA Astrophysics Data System (ADS)

    Inoue, Tsuyoshi; Kado, Yuji; Tokuoka, Keiji; Matsumura, Hiroyoshi; Kai, Yasushi; Mori, Yusuke; Adachi, Hiroaki; Takano, Kazufumi; Murakami, Satoshi; Fukunishi, Yoshifumi; Nakamura, Haruki; Kinoshita, Takayoshi; Nakanishi, Isao; Okuno, Yasushi; Minakata, Seiji; Sakata, Tsuneaki

    2007-03-01

    We recently established a drug development value chain collaborated by The SOSHO project (http://www.sosho.jp) and The BioGrid Project (http://www.biogrid.jp/) to accelerate new drug development. The SOSHO project provides new crystal growth methods including handling of protein crystals, and The BioGrid Project their developing software necessary for the in silico screening of promising drugs and the simulation of biological responses to proteins. We selected the two target enzymes; human hematopoietic prostaglandin D synthase (H-PGDS) and orotidine 5'-monophosphate decarboxylase from human malaria parasite plasmodium falciparum (PfOMPDC). The optimizing of HQL-79, the inhibitor for human H-PGDS and the screening of a lead compound for PfOMPDC by using in silico method are in study.

  12. Lead-acid battery use in the development of renewable energy systems in China

    NASA Astrophysics Data System (ADS)

    Chang, Yu; Mao, Xianxian; Zhao, Yanfang; Feng, Shaoli; Chen, Hongyu; Finlow, David

    Policies and laws encouraging the development of renewable energy systems in China have led to rapid progress in the past 2 years, particularly in the solar cell (photovoltaic) industry. The development of the photovoltaic (PV) and wind power markets in China is outlined in this paper, with emphasis on the utilization of lead-acid batteries. The storage battery is a key component of PV/wind power systems, yet many deficiencies remain to be resolved. Some experimental results are presented, along with examples of potential applications of valve regulated lead-acid (VRLA) batteries, both the absorbed glass mat (AGM) and gelled types.

  13. NASA's Robotic Lunar Lander Development Project

    NASA Technical Reports Server (NTRS)

    Cohen, Barbara A.

    2012-01-01

    Since early 2005, NASA's Robotic Lunar Lander Development (RLLD) office at NASA MSFC, in partnership with the Applied Physics Laboratory (APL), has developed mission concepts and preformed risk-reduction activities to address planetary science and exploration objectives uniquely met with landed missions. The RLLD team developed several concepts for lunar human-exploration precursor missions to demonstrate precision landing and in-situ resource utilization, a multi-node lunar geophysical network mission, either as a stand-alone mission, or as part of the International Lunar Network (ILN), a Lunar Polar Volatiles Explorer and a Mercury lander mission for the Planetary Science decadal survey, and an asteroid rendezvous and landing mission for the Exploration Precursor Robotics Mission (xPRM) office. The RLLD team has conducted an extensive number of risk-reduction activities in areas common to all lander concepts, including thruster testing, propulsion thermal control demonstration, composite deck design and fabrication, and landing leg stability and vibration. In parallel, the team has developed two robotic lander testbeds providing closed-loop, autonomous hover and descent activities for integration and testing of flight-like components and algorithms. A compressed-air test article had its first flight in September 2009 and completed over 150 successful flights. This small test article (107 kg dry/146 kg wet) uses a central throttleable thruster to offset gravity, plus 3 descent thrusters (37lbf ea) and 6 attitude-control thrusters (12lbf ea) to emulate the flight system with pulsed operation over approximately 10s of flight time. The test article uses carbon composite honeycomb decks, custom avionics (COTS components assembled in-house), and custom flight and ground software. A larger (206 kg dry/322 kg wet), hydrogen peroxide-propelled vehicle began flight tests in spring 2011 and fly over 30 successful flights to a maximum altitude of 30m. The monoprop testbed

  14. Mammalian Kidney Development: Principles, Progress, and Projections

    PubMed Central

    Little, Melissa H.; McMahon, Andrew P.

    2012-01-01

    The mammalian kidney is a vital organ with considerable cellular complexity and functional diversity. Kidney development is notable for requiring distinct but coincident tubulogenic processes involving reciprocal inductive signals between mesenchymal and epithelial progenitor compartments. Key molecular pathways mediating these interactions have been identified. Further, advances in the analysis of gene expression and gene activity, coupled with a detailed knowledge of cell origins, are enhancing our understanding of kidney morphogenesis and unraveling the normal processes of postnatal repair and identifying disease-causing mechanisms. This article focuses on recent insights into central regulatory processes governing organ assembly and renal disease, and predicts future directions for the field. PMID:22550230

  15. Navajo-Hopi Land Commission Renewable Energy Development Project (NREP)

    SciTech Connect

    Thomas Benally, Deputy Director,

    2012-05-15

    The Navajo Hopi Land Commission Office (NHLCO), a Navajo Nation executive branch agency has conducted activities to determine capacity-building, institution-building, outreach and management activities to initiate the development of large-scale renewable energy - 100 megawatt (MW) or larger - generating projects on land in Northwestern New Mexico in the first year of a multi-year program. The Navajo Hopi Land Commission Renewable Energy Development Project (NREP) is a one year program that will develop and market a strategic business plan; form multi-agency and public-private project partnerships; compile site-specific solar, wind and infrastructure data; and develop and use project communication and marketing tools to support outreach efforts targeting the public, vendors, investors and government audiences.

  16. NASA Remediation Technology Collaboration Development Task, Overview and Project Summaries

    NASA Technical Reports Server (NTRS)

    Romeo, James G.

    2014-01-01

    An overview presentation of NASA's Remediation Technology Collaboration Development Task including the following project summaries: in situ groundwater monitor, in situ chemical oxidation, in situ bioremediation, horizontal multi-port well, and high resolution site characterization.

  17. Project ProCEED: A Model for Developing Professional Excellence.

    ERIC Educational Resources Information Center

    Miller, Marilyn; Waddell, Michael G.

    1984-01-01

    Project ProCEED is a staff development model for promoting the type of professional excellence recommended in national educational reports. A six-month program designed and implemented by teachers and principals is examined. (DF)

  18. Thermal Protection Test Bed Pathfinder Development Project

    NASA Technical Reports Server (NTRS)

    Snapp, Cooper

    2015-01-01

    In order to increase thermal protection capabilities for future reentry vehicles, a method to obtain relevant test data is required. Although arc jet testing can be used to obtain some data on materials, the best method to obtain these data is to actually expose them to an atmospheric reentry. The overprediction of the Orion EFT-1 flight data is an example of how the ground test to flight traceability is not fully understood. The RED-Data small reentry capsule developed by Terminal Velocity Aerospace is critical to understanding this traceability. In order to begin to utilize this technology, ES3 needs to be ready to build and integrate heat shields onto the RED-Data vehicle. Using a heritage Shuttle tile material for the heat shield will both allow valuable insight into the environment that the RED-Data vehicle can provide and give ES3 the knowledge and capability to build and integrate future heat shields for this vehicle.

  19. Tucson Solar Village: Project management. A project in sustainable community development

    SciTech Connect

    Not Available

    1991-11-01

    The Tucson Solar Village is a Design/Build Project In Sustainable Community Development which responds to a broad spectrum of energy, environmental, and economic challenges. This project is designed for 820 acres of undeveloped State Trust Land within the Tucson city limits; residential population will be five to six thousand persons with internal employment provided for 1200. This is a 15 year project (for complete buildout and sales) with an estimated cost of $500 million. Details of the project are addressed with emphasis on the process and comments on its transferability.

  20. CKAVTS Career Development Project. Resource Handbook. K-12.

    ERIC Educational Resources Information Center

    Kosier, Mary W.

    Goals, objectives, and sample units used during Phase II of a career development project conducted by the Central Kansas Area Vocational Technical School (CKAVTS) Administrative Center to demonstrate the integration of career development in the classroom are contained in this resource handbook for grades K-12. The materials were developed by…

  1. NASA GRC UAS Project - Communications Modeling and Simulation Development Status

    NASA Technical Reports Server (NTRS)

    Apaza, Rafael; Bretmersky, Steven; Dailey, Justin; Satapathy, Goutam; Ditzenberger, David; Ye, Chris; Kubat, Greg; Chevalier, Christine; Nguyen, Thanh

    2014-01-01

    The integration of Unmanned Aircraft Systems (UAS) in the National Airspace represents new operational concepts required in civil aviation. These new concepts are evolving as the nation moves toward the Next Generation Air Transportation System (NextGen) under the leadership of the Joint Planning and Development Office (JPDO), and through ongoing work by the Federal Aviation Administration (FAA). The desire and ability to fly UAS in the National Air Space (NAS) in the near term has increased dramatically, and this multi-agency effort to develop and implement a national plan to successfully address the challenges of UAS access to the NAS in a safe and timely manner is well underway. As part of the effort to integrate UAS in the National Airspace, NASA Glenn Research Center is currently involved with providing research into Communications systems and Communication system operations in order to assist with developing requirements for this implementation. In order to provide data and information regarding communication systems performance that will be necessary, NASA GRC is tasked with developing and executing plans for simulations of candidate future UAS command and control communications, in line with architectures and communications technologies being developed and or proposed by NASA and relevant aviation organizations (in particular, RTCA SC-203). The simulations and related analyses will provide insight into the ability of proposed communications technologies and system architectures to enable safe operation of UAS, meeting UAS in the NAS project goals (including performance requirements, scalability, and interoperability), and ultimately leading to a determination of the ability of NextGen communication systems to accommodate UAS. This presentation, compiled by the NASA GRC Modeling and Simulation team, will provide an update to this ongoing effort at NASA GRC as follow-up to the overview of the planned simulation effort presented at ICNS in 2013. The objective

  2. Small Payload Integration and Testing Project Development

    NASA Technical Reports Server (NTRS)

    Sorenson, Tait R.

    2014-01-01

    The National Aeronautics and Space Administration's (NASA) Kennedy Space Center (KSC) has mainly focused on large payloads for space flight beginning with the Apollo program to the assembly and resupply of the International Space Station using the Space Shuttle. NASA KSC is currently working on contracting manned Low Earth Orbit (LEO) to commercial providers, developing Space Launch System, the Orion program, deep space manned programs which could reach Mars, and providing technical expertise for the Launch Services Program for science mission payloads/satellites. KSC has always supported secondary payloads and smaller satellites as the launch provider; however, they are beginning to take a more active role in integrating and testing secondary payloads into future flight opportunities. A new line of business, the Small Payload Integration and Testing Services (SPLITS), has been established to provide a one stop shop that can integrate and test payloads. SPLITS will assist high schools, universities, companies and consortiums interested in testing or launching small payloads. The goal of SPLITS is to simplify and facilitate access to KSC's expertise and capabilities for small payloads integration and testing and to help grow the space industry. An effort exists at Kennedy Space Center to improve the external KSC website. External services has partnered with SPLITS as a content test bed for attracting prospective customers. SPLITS is an emerging effort that coincides with the relaunch of the website and has a goal of attracting external partnerships. This website will be a "front door" access point for all potential partners as it will contain an overview of KSC's services, expertise and includes the pertinent contact information.

  3. FPGA developments for the SPARTA project

    NASA Astrophysics Data System (ADS)

    Goodsell, S. J.; Fedrigo, E.; Dipper, N. A.; Donaldson, R.; Geng, D.; Myers, R. M.; Saunter, C. D.; Soenke, C.

    2005-08-01

    The European Southern Observatory (ESO) and Durham University's Centre for Advanced Instrumentation (CfAI) are currently designing a standard next generation Adaptive Optics (AO) Real-Time Control System. This platform, labelled SPARTA 'Standard Platform for Adaptive optics Real-Time Applications' will initially control the AO systems for ESO's 2nd generation VLT instruments, and will scale to implement the initial AO systems for ESO's future 100m telescope OWL. Durham's main task is to develop the Wavefront Sensor (WFS) front end and Statistical Machinery for the SPARTA platform using Field Programmable Gate Arrays (FPGA). SPARTA takes advantage of a FPGA device to alleviate the highly parallel computationally intensive tasks from the system processors, increasing the obtainable control loop frequency and reducing the computational latency in the control system. The WFS pixel stream enters a PMC hosted FPGA card contained within the SPARTA platform via optical fibres carrying the VITA 17.18/10 standard 2.5Gbps-1 serial Front Panel Data Port (sFPDP) protocol. Each FPGA board can receive a maximum of 10Gbs-1 of data via on-board optical transceivers. The FPGA device reduces WFS frames to gradient vectors before passing the data to the system processors. The FPGA allows the processors to deal with other tasks such as wavefront reconstruction, telemetry and real-time data recording, allowing for more complex adaptive control algorithms to be executed. This paper overviews the SPARTA requirements and current platform architecture, Durham's Wavefront Processor FPGA design and it concludes with a future plan of work.

  4. Problems of development the pilot lead-bismuth target circuit TC-1 for ADS

    SciTech Connect

    Ignatiev, Sviatoslav; Leonchuk, Mikhail; Orlov, Yury; Pankratov, Dmitry; Suvorov, Gennady; Zabudko, Alexey

    2007-07-01

    Available in abstract form only. Full text of publication follows: Main problems on development of pilot molten lead-bismuth target circuit of 1 MW proton beam power (TC-1) as an important part of target-blanket accelerator driven system (ADS) for nuclear waste incineration are analyzed. (authors)

  5. BLOOD LEAD, HEARING THRESHOLDS, AND NEUROBEHAVIORAL DEVELOPMENT IN CHILDREN AND YOUTH (JOURNAL VERSION)

    EPA Science Inventory

    NHANES II audiometry data were used to confirm a previously observed link between blood lead (PbB) level and hearing threshold. Other indicators of neurological development, such as age at which a child first sat up, walked, and spoke, and the presence of speech difficulties and ...

  6. Development and Preparation of Lead-Containing Paint Films and Diagnostic Test Materials

    EPA Science Inventory

    Lead in paint continues to be a threat to children’s health in cities across the United States, which means there is an ongoing need for testing and analysis of paint. This ongoing analytical effort and especially development of new methods continue to drive the need for diagnost...

  7. The Leading Edge: A Career Development Workshop Series for Young Adults. Participant Workbook.

    ERIC Educational Resources Information Center

    Canadian Career Development Foundation, Ottawa (Ontario).

    This booklet is designed for participants in "The Leading Edge: A Career Development Workshop Series for Young Adults." It provides the 27 participant handouts for the six workshops in the series. The first in the series, "Setting the Stage: The Changing World of Work," is a workshop to clarify what is occurring in the world of work and apply that…

  8. Healthy city projects in developing countries: the first evaluation.

    PubMed

    Harpham, T; Burton, S; Blue, I

    2001-06-01

    The 'healthy city' concept has only recently been adopted in developing countries. From 1995 to 1999, the World Health Organization (WHO), Geneva, supported healthy city projects (HCPs) in Cox's Bazar (Bangladesh), Dar es Salaam (Tanzania), Fayoum (Egypt), Managua (Nicaragua) and Quetta (Pakistan). The authors evaluated four of these projects, representing the first major evaluation of HCPs in developing countries. Methods used were stakeholder analysis, workshops, document analysis and interviews with 102 managers/implementers and 103 intended beneficiaries. Municipal health plan development (one of the main components of the healthy city strategy) in these cities was limited, which is a similar finding to evaluations of HCPs in Europe. The main activities selected by the projects were awareness raising and environmental improvements, particularly solid waste disposal. Two of the cities effectively used the 'settings' approach of the healthy city concept, whereby places such as markets and schools are targeted. The evaluation found that stakeholder involvement varied in relation to: (i) the level of knowledge of the project; (ii) the project office location; (iii) the project management structure; and (iv) type of activities (ranging from low stakeholder involvement in capital-intensive infrastructure projects, to high in some settings-type activities). There was evidence to suggest that understanding of environment-health links was increased across stakeholders. There was limited political commitment to the healthy city projects, perhaps due to the fact that most of the municipalities had not requested the projects. Consequently, the projects had little influence on written/expressed municipal policies. Some of the projects mobilized considerable resources, and most projects achieved effective intersectoral collaboration. WHO support enabled the project coordinators to network at national and international levels, and the capacity of these individuals (although

  9. Project CIVTEC: A State-Wide Curriculum Development Project in Engineering Technology.

    ERIC Educational Resources Information Center

    Smith, James D., Jr.; And Others

    The CET (Civil Engineering Technology) project was a statewide curriculum development effort to develop an instructional format to train civil engineering technicians in South Carolina. It was designed to: (1) identify specific job competencies; (2) develop an individualized, self-paced instructional format complete with software and equipment;…

  10. Magnetohydrodynamic projects at the CDIF (Component Development and Integration Facility)

    SciTech Connect

    Not Available

    1990-01-01

    This quarterly technical progress report presents the tasks accomplished at the Component Development and Integration Facility during the fourth quarter of FY90. Areas of technical progress this quarter included: coal system development; seed system development; test bay modification; channel power dissipation and distribution system development; oxygen system storage upgrade; iron core magnet thermal protection system oxygen checkout; TRW slag rejector/CDIF slag removal project; stack gas/environmental compliance upgrade; coal-fired combustor support; 1A channels fabrication and assembly; support of Mississippi State University diagnostic testing; test operations and results; data enhancement; data analysis and modeling; technical papers; and projected activities. 2 tabs.

  11. Overview of NASA's Thermal Control System Development for Exploration Project

    NASA Technical Reports Server (NTRS)

    Stephan, Ryan A.

    2011-01-01

    The now-cancelled Constellation Program included the Orion, Altair, and Lunar Surface Systems project offices. The first two elements, Orion and Altair, were planned to be manned space vehicles while the third element was much more diverse and included several sub-elements. Among other things, these sub-elements were Rovers and a Lunar Habitat. The planned missions involving these systems and vehicles included several risks and design challenges. Due to the unique thermal operating environment, many of these risks and challenges were associated with the vehicles thermal control system. NASA s Exploration Technology Development Program (ETDP) consisted of various technology development projects. The project chartered with mitigating the aforementioned thermal risks and design challenges was the Thermal Control System Development for Exploration Project. These risks and design challenges were being addressed through a rigorous technology development process that was planned to culminate with an integrated thermal control system test. Although the technologies being developed were originally aimed towards mitigating specific Constellation risks, the technology development process is being continued within a new program. This continued effort is justified by the fact that many of the technologies are generically applicable to future spacecraft thermal control systems. The current paper summarizes the development efforts being performed by the technology development project. The development efforts involve heat acquisition and heat rejection hardware including radiators, heat exchangers, and evaporators. The project has also been developing advanced phase change material heat sinks and performing a material compatibility assessment for a promising thermal control system working fluid. The to-date progress and lessons-learned from these development efforts will be discussed throughout the paper.

  12. The Leadosaurus Task Force: An Educational Project to Identify and Remediate Lead Poisoning in the Muessel School Neighborhood

    ERIC Educational Resources Information Center

    Hall, Leda McIntyre

    2004-01-01

    The existence and effects of lead poisoning continue to plague young children and their families, particularly children in older inner city neighborhoods. A task force in South Bend, Indiana, developed a parental education program which was implemented at an inner city elementary school. The program involved parent education, events for the…

  13. Hand leading and hand taking gestures in autism and typically developing children.

    PubMed

    Gómez, Juan-Carlos

    2015-01-01

    Children with autism use hand taking and hand leading gestures to interact with others. This is traditionally considered to be an example of atypical behaviour illustrating the lack of intersubjective understanding in autism. However the assumption that these gestures are atypical is based upon scarce empirical evidence. In this paper I present detailed observations in children with autism and typically developing children, suggesting that hand-leading gestures may be an adaptive form of interaction in typically developing children neglected by mainstream developmental psychology. I conclude that, although there may be features differentiating how these gestures are used in autism and typical children, systematic research on them is needed to clarify their nature and significance for both typical and atypical development. PMID:25388062

  14. The development of advanced lead-acid batteries for utility applications

    SciTech Connect

    Szymborski, J.; Jungst, R.G.

    1993-10-01

    Technical advances in lead-acid battery design have created new opportunities for battery systems in telecommunications, computer backup power and vehicle propulsion power. Now the lead-acid battery has the opportunity to become a major element in the mix of technologies used by electric utilities for several power quality and energy and resource management functions within the network. Since their introduction into industrial applications, Valve Regulated Lead-Acid (VRLA) batteries have received widespread acceptance and use in critical telecommunications and computer installations, and have developed over 10 years of reliable operational history. As further enhancements in performance, reliability and manufacturing processes are made, these VRLA batteries are expanding the role of battery-based energy storage systems within utility companies portfolios. This paper discusses the rationale and process of designing, optimizing and testing VRLA batteries for specific utility application requirements.

  15. The "Messy" Business of Academic Developers Leading Other Academic Developers: Critical Reflection on a Curriculum Realignment Exercise

    ERIC Educational Resources Information Center

    Thomas, Sharon; Cordiner, Moira

    2014-01-01

    Little has been written about academic developers (ADs) working in teams leading other ADs. This paper chronicles the experience of a group of ADs in one Australian university working on a curriculum realignment exercise. Unexpectedly the dominant theme in participants' reflections was group dynamics, not the process. We were confronted by…

  16. International assistance and health care reform in Poland: barriers to project development and implementation.

    PubMed

    Sabbat, J

    1997-09-01

    The restoration of democracy in Poland initiated a major system transformation including reform of the health sector. The international community were quick to respond to the need for assistance. Polish proposals were supported by international experts and projects were developed together with international development agencies and donors. Donors had no experience of central and eastern Europe, these countries had never been beneficiaries of aid and neither side had experience working together. Progress and absorption of funds was slow. Comparative experience from developing countries was used to analyze the barriers encountered in project development and implementation in Poland. The conditions necessary for implementation were not satisfied. Insufficient attention was paid to the project process. Barriers originate on the side of both donors and recipients and additionally from programme characteristics. The most serious problems experience in Poland were lack of government commitment to health care reform leading to failure to provide counterpart funds and low capacity for absorption of aid. Rent seeking attitudes were important. Donor paternalistic attitudes, complex procedures and lack of innovative approach were also present. Poor coordination was a problem on both sides. Multi-lateral projects were too complex and it was not always possible to integrate project activities with routine ones. External consultants played an excessive role in project development and implementation, absorbing a large portion of funds. The barriers have been operationalised to create a checklist which requires validation elsewhere and may be useful for those working in this field. PMID:10170090

  17. Leading multi-professional teams in the children’s workforce: an action research project

    PubMed Central

    Stuart, Kaz

    2012-01-01

    Introduction The 2004 Children Act in the UK saw the introduction of integrated working in children’s services. A raft of change followed with processes designed to make joint working easier, and models and theories to support the development of integrated work. This paper explores the links between key concepts and practice. Methods A practitioner action research approach is taken using an autoethnographic account kept over six months. The research question was, to what extent is this group collaborating? Results When the architecture of practice was revealed, differences between espoused and real practice could be seen. Whilst understanding and displaying the outward signs of an effective multi professional group, the individuals did not trust one another. This was exhibited by covert interprofessional issues. As a result, collaborative inertia was achieved. This realisation prompted them to participate in further developmental and participative action research. Conclusion The paper concludes that trust and relational agency are central to effective leadership of multi professional teams. PMID:22371690

  18. The Development of Success Criteria for Educational Research and Development Projects.

    ERIC Educational Resources Information Center

    Ball, Rodney J.; Cook, Desmond L.

    The purpose of this study was to determine the relative importance of six criteria of project success and to develop a composite criterion of educational project success. Criteria considered were schedule, cost, quality/performance, follow-onwork, spin-of benefits, customer/client satisfaction, and overall project success. Two hundred and six…

  19. The Start-Up Phase in a Research and Development Work Project: A Foundation for Development

    ERIC Educational Resources Information Center

    Postholm, May Britt

    2008-01-01

    The article is based on a research and development work project (R&D project) conducted in a Norwegian lower secondary school. The purpose of the text is to describe the researchers' and teachers' roles during the initial phase of such a project, and what this phase and the close cooperation between the researcher and teachers mean for the…

  20. Development of porous clay-based composites for the sorption of lead from water.

    PubMed

    Ake, C L; Mayura, K; Huebner, H; Bratton, G R; Phillips, T D

    2001-07-20

    Lead contamination of water is a major health hazard, as illustrated by the fact that exposure to this metal has been associated with death and disease in humans, birds, and animals. The present research was aimed at the development of a porous, solid-phase sorbent that can be used in the remediation of lead-contaminated water. A suitable sorbent was identified by screening various clays and other materials for their ability to effectively bind lead. The clay was adhered to a solid support using an aqueous solution of carboxymethyl cellulose. The binary composite was then tested for its ability to bind lead from solution, while providing void volume, increased surface area, and considerably enhanced hydraulic conductivity. The results suggested that a combination of sodium montmorillonite clay and carbon exhibited enhanced sorption of lead compared to carbon alone, and also supported the potential application of various combinations of sorbent materials. This value-added combination of clay, solid support, and adhesive will allow for the construction of column filtration systems that are multifunctional and capable of purifying large volumes of contaminated water. PMID:11482800

  1. Flat-plate solar array project. Volume 5: Process development

    NASA Astrophysics Data System (ADS)

    Gallagher, B.; Alexander, P.; Burger, D.

    1986-10-01

    The goal of the Process Development Area, as part of the Flat-Plate Solar Array (FSA) Project, was to develop and demonstrate solar cell fabrication and module assembly process technologies required to meet the cost, lifetime, production capacity, and performance goals of the FSA Project. R&D efforts expended by Government, Industry, and Universities in developing processes capable of meeting the projects goals during volume production conditions are summarized. The cost goals allocated for processing were demonstrated by small volume quantities that were extrapolated by cost analysis to large volume production. To provide proper focus and coverage of the process development effort, four separate technology sections are discussed: surface preparation, junction formation, metallization, and module assembly.

  2. Flat-plate solar array project. Volume 5: Process development

    NASA Technical Reports Server (NTRS)

    Gallagher, B.; Alexander, P.; Burger, D.

    1986-01-01

    The goal of the Process Development Area, as part of the Flat-Plate Solar Array (FSA) Project, was to develop and demonstrate solar cell fabrication and module assembly process technologies required to meet the cost, lifetime, production capacity, and performance goals of the FSA Project. R&D efforts expended by Government, Industry, and Universities in developing processes capable of meeting the projects goals during volume production conditions are summarized. The cost goals allocated for processing were demonstrated by small volume quantities that were extrapolated by cost analysis to large volume production. To provide proper focus and coverage of the process development effort, four separate technology sections are discussed: surface preparation, junction formation, metallization, and module assembly.

  3. Advanced Gas Turbine (AGT) Technology Development Project annual report

    NASA Technical Reports Server (NTRS)

    1986-01-01

    This report is the tenth in a series of Technical Summary reports for the Advanced Gas Turbine (AGT) Technology Development Project, authorized under NASA Contract DEN3-167, and sponsored by the Department of Energy (DOE). This report was prepared by Garrett Turbine Engine Company, A Division of the Garrett Corporation, and includes information provided by Ford Motor Company, the Carborundum Company, and AiResearch Casting Company. The Project is administered by Mr. Thomas N. Strom, Project Manager, NASA-Lewis Research Center, Cleveland, Ohio. This report covers plans and progress for the period July 1, 1984 through June 30, 1985.

  4. [Wisconsin] Research and Development Project in Career Education: Final Report.

    ERIC Educational Resources Information Center

    Lehrmann, Eugene I.

    The K-Adult research and development project in career education in Eau Claire, Wisconsin, contained two phases: (1) Eau Claire Joint School District Five, introducing the 16 Wisconsin career development concepts into school curricula through teacher workshops, resource materials, public relations, and consulting services for classroom teachers…

  5. Research, development, and demonstration of lead-acid batteries for electric-vehicle propulsion. Annual report for 1982

    SciTech Connect

    Bowman, D.E.

    1983-08-01

    Research programs on lead-acid batteries are reported that cover active materials utilization, active material integrity, and some technical support projects. Processing problems were encountered and corrected. Components and materials, a lead-plastic composite grid, cell designs, and deliverables are described. Cell testing is discussed, as well as battery subsystems, including fuel gage, thermal management, and electrolyte circulation. (LEW)

  6. Tools for Closure Project and Contract Management: Development of the Rocky Flats Integrated Closure Project Baseline

    SciTech Connect

    Gelles, C. M.; Sheppard, F. R.

    2002-02-26

    This paper details the development of the Rocky Flats Integrated Closure Project Baseline - an innovative project management effort undertaken to ensure proactive management of the Rocky Flats Closure Contract in support of the Department's goal for achieving the safe closure of the Rocky Flats Environmental Technology Site (RFETS) in December 2006. The accelerated closure of RFETS is one of the most prominent projects within the Department of Energy (DOE) Environmental Management program. As the first major former weapons plant to be remediated and closed, it is a first-of-kind effort requiring the resolution of multiple complex technical and institutional challenges. Most significantly, the closure of RFETS is dependent upon the shipment of all special nuclear material and wastes to other DOE sites. The Department is actively working to strengthen project management across programs, and there is increasing external interest in this progress. The development of the Rocky Flats Integrated Closure Project Baseline represents a groundbreaking and cooperative effort to formalize the management of such a complex project across multiple sites and organizations. It is original in both scope and process, however it provides a useful precedent for the other ongoing project management efforts within the Environmental Management program.

  7. Communication challenges in system development: involvement of system developers in small-scale IT projects.

    PubMed

    Petersen, Lone Stub; Bjoernes, Charlotte D; Bertelsen, Pernille

    2010-01-01

    A well-known challenge in system development is the aspect of user participation. In this paper we shift perspective from how to involve users in system development to how project managers with a clinical background, but without technical system knowledge, can involve system developers in IT projects. Using data from the development of an online patient book (an ICT application for clinical practice), we analyze challenges using the concept of language-games. We conclude that further research and development of participatory and communicative methods to involve system developers in IT projects, based in a clinical context, is needed. PMID:20543370

  8. Lead Exposure during Early Human Development and DNA Methylation of Imprinted Gene Regulatory Elements in Adulthood

    PubMed Central

    Li, Yue; Xie, Changchun; Murphy, Susan K.; Skaar, David; Nye, Monica; Vidal, Adriana C.; Cecil, Kim M.; Dietrich, Kim N.; Puga, Alvaro; Jirtle, Randy L.; Hoyo, Cathrine

    2015-01-01

    Background: Lead exposure during early development causes neurodevelopmental disorders by unknown mechanisms. Epidemiologic studies have focused recently on determining associations between lead exposure and global DNA methylation; however, such approaches preclude the identification of loci that may alter human disease risk. Objectives: The objective of this study was to determine whether maternal, postnatal, and early childhood lead exposure can alter the differentially methylated regions (DMRs) that control the monoallelic expression of imprinted genes involved in metabolism, growth, and development. Methods: Questionnaire data and serial blood lead levels were obtained from 105 participants (64 females, 41 males) of the Cincinnati Lead Study from birth to 78 months. When participants were adults, we used Sequenom EpiTYPER assays to test peripheral blood DNA to quantify CpG methylation in peripheral blood leukocytes at DMRs of 22 human imprinted genes. Statistical analyses were conducted using linear regression. Results: Mean blood lead concentration from birth to 78 months was associated with a significant decrease in PEG3 DMR methylation (β = –0.0014; 95% CI: –0.0023, –0.0005, p = 0.002), stronger in males (β = –0.0024; 95% CI: –0.0038, –0.0009, p = 0.003) than in females (β = –0.0009; 95% CI: –0.0020, 0.0003, p = 0.1). Elevated mean childhood blood lead concentration was also associated with a significant decrease in IGF2/H19 (β = –0.0013; 95% CI: –0.0023, –0.0003, p = 0.01) DMR methylation, but primarily in females, (β = –0.0017; 95% CI: –0.0029, –0.0006, p = 0.005) rather than in males, (β = –0.0004; 95% CI: –0.0023, 0.0015, p = 0.7). Elevated blood lead concentration during the neonatal period was associated with higher PLAGL1/HYMAI DMR methylation regardless of sex (β = 0.0075; 95% CI: 0.0018, 0.0132, p = 0.01). The magnitude of associations between cumulative lead exposure and CpG methylation remained unaltered from

  9. Metallic return transfer breaker development. Research project 667. Final report

    SciTech Connect

    Marshall, N.

    1981-04-01

    EPRI and Hughes Research Laboratories (HRL) contracted to develop and test a metallic return transfer breaker (MRTB) utilizing the novel Hughes crossed-field tube, which, on an earlier contract (EPRI Project RP 91) had become the world's first HVDC circuit breaker to successfully clear a fault on a multiterminal HVDC system. The function of an MRTB is to transfer load current between earth and metallic returns on a bipolar HVDC system. THE MRTB with a single crossed-field tube, mechanical in-line switch (MIS), and zinc-oxide resistor was completed and successfully passed high-voltage withstand and electro-magnetic interference (EMI) tests at Hughes Malibu facility in July of 1978. The unit was installed at the Celilo station of the Bonneville Power Administration in December of 1978. An operational test in December 1978 was to include transfer from the earth-return to the metallic-return mode at line currents 300, 600, 1200, and 1800 A. The 300- and 600-A tests were completely successful and produced no unusual results. At the start of the 1200-A transfer, an arc was struck from the top of the entrance bushing to the enclosure of the interrupter, followed by an explosion that blew the doors off the enclosure. An ensuing fire was self-extinguishing. A thorough analysis revealed that the primary cause of failure was an arc struck from a temporary instrumentation lead previously opened at the connecting lug by excess tension from mechanical flexing. A secondary cause was rupture of the case of the interrupter head of the MIS, which created a flammable state within the MRTB enclosure. EPRI and HRL jointly decided termination appeared the most practical option because the MIS could not easily be replaced by HRL with a unit of different design. EPRI decided to pursue an alternative approach. The control and communication electronics of EPRI MRTB, which survived the explosion without failure, could be utilized.

  10. Research, development and demonstration of lead-acid batteries for electric vehicle propulsion. Annual report, 1979

    SciTech Connect

    Not Available

    1980-06-01

    This report describes work performed from October 1, 1978 to September 30, 1979. The approach for development of both the Improved State-of-the-Art (ISOA) and Advanced lead-acid batteries is three pronged. This approach concentrates on simultaneous optimization of battery design, materials, and manufacturing processing. The 1979 fiscal year saw the achievement of significant progress in the program. Some of the major accomplishments of the year are outlined. 33 figures, 13 tables. (RWR)

  11. Research, design & development project Myoelectric Prosthesis of Upper Limb

    NASA Astrophysics Data System (ADS)

    Galiano, L.; Montaner, E.; Flecha, A.

    2007-11-01

    A Research Design and Development Project was developed of a myoelectric prosthesis for a pediatric patient presenting congenital amputation of the left forearm below the elbow. A multidisciplinary work-team was formed for this goal, in order to solve the several (/various) aspects regarding this project (mechanical, ergonomics, electronics, physical). The prosthesis as an electromechanical device was divided in several blocks, trying to achieve a focused development for each stage, acording to requisites. A mechanical prototype of the prothesis was designed and built along with the circuitry needed for EMG aquisition, control logic and drivers. Having acomplished the previuos stages, the project is now dealing with the definitions of the interface between the prosthesis and the patient, with promising perspectives.

  12. The SIMRAND methodology - Simulation of Research and Development Projects

    NASA Technical Reports Server (NTRS)

    Miles, R. F., Jr.

    1984-01-01

    In research and development projects, a commonly occurring management decision is concerned with the optimum allocation of resources to achieve the project goals. Because of resource constraints, management has to make a decision regarding the set of proposed systems or tasks which should be undertaken. SIMRAND (Simulation of Research and Development Projects) is a methodology which was developed for aiding management in this decision. Attention is given to a problem description, aspects of model formulation, the reduction phase of the model solution, the simulation phase, and the evaluation phase. The implementation of the considered approach is illustrated with the aid of an example which involves a simplified network of the type used to determine the price of silicon solar cells.

  13. Rapid Response Risk Assessment in New Project Development

    NASA Technical Reports Server (NTRS)

    Graber, Robert R.

    2010-01-01

    A capability for rapidly performing quantitative risk assessments has been developed by JSC Safety and Mission Assurance for use on project design trade studies early in the project life cycle, i.e., concept development through preliminary design phases. A risk assessment tool set has been developed consisting of interactive and integrated software modules that allow a user/project designer to assess the impact of alternative design or programmatic options on the probability of mission success or other risk metrics. The risk and design trade space includes interactive options for selecting parameters and/or metrics for numerous design characteristics including component reliability characteristics, functional redundancy levels, item or system technology readiness levels, and mission event characteristics. This capability is intended for use on any project or system development with a defined mission, and an example project will used for demonstration and descriptive purposes, e.g., landing a robot on the moon. The effects of various alternative design considerations and their impact of these decisions on mission success (or failure) can be measured in real time on a personal computer. This capability provides a high degree of efficiency for quickly providing information in NASA s evolving risk-based decision environment

  14. NASA Advanced Refrigerator/Freezer Technology Development Project Overview

    NASA Technical Reports Server (NTRS)

    Cairelli, J. E.

    1995-01-01

    NASA Lewis Research Center (LeRC) has recently initiated a three-year project to develop the advanced refrigerator/freezer (R/F) technologies needed to support future life and biomedical sciences space experiments. Refrigerator/freezer laboratory equipment, most of which needs to be developed, is enabling to about 75 percent of the planned space station life and biomedical science experiments. These experiments will require five different classes of equipment; three storage freezers operating at -20 C, -70 C and less than 183 C, a -70 C freeze-dryer, and a cryogenic (less than 183 C) quick/snap freezer. This project is in response to a survey of cooling system technologies, performed by a team of NASA scientists and engineers. The team found that the technologies, required for future R/F systems to support life and biomedical sciences spaceflight experiments, do not exist at an adequate state of development and concluded that a program to develop the advanced R/F technologies is needed. Limitations on spaceflight system size, mass, and power consumption present a significant challenge in developing these systems. This paper presents some background and a description of the Advanced R/F Technology Development Project, project approach and schedule, general description of the R/F systems, and a review of the major R/F equipment requirements.

  15. Student Lead Nanosatellite Design/Build Projects: making a cost effective approach to Earth and Space Observational Science even more cost efficient

    NASA Astrophysics Data System (ADS)

    Bottoms, J.; Lange, B. A.; AlbertaSat

    2011-12-01

    With the advancement of technologies and the miniaturization of sensors and electrical/computational components satellites are also undergoing miniaturization. With lower manufacturing cost and a decreased design/build cycle (~2 years from start to launch), compared to conventional large scale satellites, nanosatellites have become a cost effective alternative for satellite Earth and Space Observations. The University of Alberta student nanosatellite (10x10x30cm; <4kg) design/build team, AlbertaSat-1, is a participant in the Canadian Satellite Design Challenge (CSDC) implemented by the CSA and Geocentrix Ltd. in addition to 15 other Universities from across Canada. AlbertaSat-1 will be launched in early 2013, after a 2 year design/build process and environmental testing. AlbertaSat-1 will be an Earth Observation satellite monitoring GHG (CO2, H2O & CH4) concentrations over many regions of the earth with the use of a NIR spectrometer. Here we present the planning, design and future manufacturing of AlbertaSat-1 with a focus on budget and cost effective solutions. Since this is a student project, AlbertaSat-1 will incur certain benefits making them exempt from certain financial requirements and obtaining services and equipment at very low or no cost. The largest cost benefit of AlbertaSat-1 is the virtual elimination of labor costs by having a team consisting of only unpaid students. Labor costs of typical satellite missions can be a very costly component. The educational components of such projects offer more indirect benefits to effective development of this industry/discipline, nevertheless just as important, by developing skills and knowledge that can only be learned through realistic hands on design/build projects. Student lead projects and student design/build initiatives such as CSDC (among many others in the U.S. and Europe lead by NASA and ESA, respectively) will have a major impact on shaping the future of Space and Earth Observational Sciences. We will

  16. Sustainable Energy in Remote Indonesian Grids. Accelerating Project Development

    SciTech Connect

    Hirsch, Brian; Burman, Kari; Davidson, Carolyn; Elchinger, Michael; Hardison, R.; Karsiwulan, D.; Castermans, B.

    2015-06-30

    Sustainable Energy for Remote Indonesian Grids (SERIG) is a U.S. Department of Energy (DOE) funded initiative to support Indonesia’s efforts to develop clean energy and increase access to electricity in remote locations throughout the country. With DOE support, the SERIG implementation team consists of the National Renewable Energy Laboratory (NREL) and Winrock International’s Jakarta, Indonesia office. Through technical assistance that includes techno-economic feasibility evaluation for selected projects, government-to-government coordination, infrastructure assessment, stakeholder outreach, and policy analysis, SERIG seeks to provide opportunities for individual project development and a collective framework for national replication office.

  17. Recent developments from ICSWSE/MAGDAS Research Project

    NASA Astrophysics Data System (ADS)

    Yoshikawa, A.; Yumoto, K.; Kawano, H.; Abe, S.; Uozumi, T.; Cardinal, C.; Maeda, G.

    2014-12-01

    International Center for Space Weather Science and Education (ICSWSE) has developed a real time magnetic data acquisition system (the MAGDAS Project) for space environment monitoring around the world. The number of observational sites is increasing every year with the collaboration of MAGDAS hosts in several countries. At this time, the MAGDAS Project has installed 73 real time magnetometers - so it is the largest magnetometer array in the world maintained and operated by one organization. Using this global observational network, we are conducting the following research projects: (1) Global electromagnetic coupling from polar to equatorial ionosphere (2) Vertical coupling between atmosphere, ionosphere and magnetosphere (3) Plasmaspheric diagnosis using Field line resonance (4) Magnetospheric diagnosis using geomagnetic disturbances (5) Monitoring of space weather phenomena using indices (6) Sun-Atmosphere coupling In this talk, we will introduce some of our interesting results obtained from the aforementioned research projects.

  18. Estimating software development costs for a patient multimedia education project.

    PubMed

    Caban, A; Cimino, C; Swencionis, C; Ginsberg, M; Wylie-Rosett, J

    2001-01-01

    The authors compare alternative methods of cost estimation for a patient multimedia education (PME) program, using a computerized weight-reduction PME project as an example. Data from the project planning and budgeting process and actual costs of the completed project are analyzed retrospectively to calculate three different estimates-pre-work, post-work, and actual work. Three traditional methods of estimating the cost of computer programs (the lines-of-code, function point, and task ratio analyses) underestimate costs in this example. A commercial program (Cost Xpert) that calculates the cost of developing a graphical user interface provided a better estimate, as did a tally reflecting the complexity and quality of media material in the project. PMID:11230386

  19. ALASKA OIL AND GAS EXPLORATION, DEVELOPMENT, AND PERMITTING PROJECT

    SciTech Connect

    Richard McMahon; Robert Crandall; Chas Dense; Sean Weems

    2003-08-04

    The objective of this project is to eliminate three closely inter-related barriers to oil production in Alaska through the use of a geographic information system (GIS) and other information technology strategies. These barriers involve identification of oil development potential from existing wells, planning projects to efficiently avoid conflicts with other interests, and gaining state approvals for exploration and development projects. Each barrier is the result of either current labor-intensive methods or poorly accessible information. This project brings together three parts of the oil exploration, development, and permitting process to form the foundation for a more fully integrated information technology infrastructure for the State of Alaska. This web-based system will enable the public and other review participants to track permit status, submit and view comments, and obtain important project information online. By automating several functions of the current manual process, permit applications will be completed more quickly and accurately, and agencies will be able to complete reviews with fewer delays. The application will include an on-line diagnostic Coastal Project Questionnaire to determine the suite of permits required for a specific project. The application will also automatically create distribution lists based on the location and type of project, populate document templates for project review start-ups, public notices and findings, allow submission of e-comments, and post project status information on the Internet. Alaska has nearly one-quarter of the nation's supply of crude oil, at least five billion barrels of proven reserves. The American Association of Petroleum Geologists report that the 1995 National Assessment identified the North Slope as having 7.4 billion barrels of technically recoverable oil and over 63 trillion cubic feet of natural gas. From these reserves, Alaska produces roughly one-fifth of the nation's daily crude oil production

  20. Development and field trial of a household surface lead loading rate sampling device in a lead-contaminated community of southern Thailand.

    PubMed

    Untimanon, Orrapan; Geater, Alan; Chongsuvivatwong, Virasakdi; Thoumsang, Somkiat; Verkasalo, Pia K; Saetia, Wiyada

    2010-05-01

    A new dust-collecting device was developed to assess surface lead loading rates in houses in communities contaminated with lead oxide dust used for caulking in nearby boat-repair yards. The device consists of two small glass sheets with total area of 1,200 cm(2) placed in two plastic trays suspended from the ceiling in the house for 3 months before wiping and sending the dust specimen for determination of lead content using flame atomic absorption spectrophotometry. After a pilot trial in four households, further data were collected from 43 matched pairs of boat-caulkers' and neighboring control households. All devices were retained in the house for 3 months without any complaint. Static measurements of lead dust levels were also assessed in all households. The values significantly discriminated high from low lead exposure households (p = 0.015) and provided good correlations with floor lead loading (Spearman rank correlation coefficient, r = 0.39 to 0.62) and dust lead content (r = 0.53 to 0.64). This sampling method is an alternative to others which consume more household space or require a longer collection period. PMID:19415518

  1. Girls Leading Outward

    ERIC Educational Resources Information Center

    Hamed, Heather; Reyes, Jazmin; Moceri, Dominic C.; Morana, Laura; Elias, Maurice J.

    2011-01-01

    The authors describe a program implemented in Red Bank Middle School in New Jersey to help at-risk, minority middle school girls realize their leadership potential. The GLO (Girls Leading Outward) program was developed by the Developing Safe and Civil Schools Project at Rutgers University and is facilitated by university students. Selected middle…

  2. Introduction to SIMRAND: Simulation of research and development project

    NASA Technical Reports Server (NTRS)

    Miles, R. F., Jr.

    1982-01-01

    SIMRAND: SIMulation of Research ANd Development Projects is a methodology developed to aid the engineering and management decision process in the selection of the optimal set of systems or tasks to be funded on a research and development project. A project may have a set of systems or tasks under consideration for which the total cost exceeds the allocated budget. Other factors such as personnel and facilities may also enter as constraints. Thus the project's management must select, from among the complete set of systems or tasks under consideration, a partial set that satisfies all project constraints. The SIMRAND methodology uses analytical techniques and probability theory, decision analysis of management science, and computer simulation, in the selection of this optimal partial set. The SIMRAND methodology is truly a management tool. It initially specifies the information that must be generated by the engineers, thus providing information for the management direction of the engineers, and it ranks the alternatives according to the preferences of the decision makers.

  3. Differential toxicity of copper, zinc, and lead during the embryonic development of Chasmagnathus granulatus (Brachyura, Varunidae).

    PubMed

    Lavolpe, Mariano; Greco, Laura López; Kesselman, Daniela; Rodríguez, Enrique

    2004-04-01

    Ovigerous females of the estuarine crab Chasmagnathus granulatus were exposed to copper (0.01 and 1 mg/L), zinc (0.05, 1, and 10 mg/L), or lead (0.01 and 1 mg/L) during early, late, or whole embryonic development. None of the assayed heavy metals produced a significant mortality of females, neither a decrease in the number of hatched larvae nor a decrease in the egg incubation time, but several morphological abnormalities were detected in hatched larvae. The abnormalities were classified in three categories: eye, body pigmentary, and body morphological abnormalities. Those larvae with eye and body pigmentary abnormalities, particularly those involving retinal pigments and chromatophores, showed the highest incidence by exposure to the assayed metals. In addition, embryos were more susceptible to copper and zinc during the late period of development, whereas the effect of lead was greater during the early period of embryogenesis. Some teratogenic effects observed in C. granulatus embryos exposed to heavy metals, particularly the hypertrophy and hypopigmentation of eyes observed in the laboratory at a lead concentration as low as that reported for the natural environment, could be considered as sensitive biomarkers for this kind of pollutant. PMID:15095892

  4. Application of computer modelling and lead field theory in developing multiple aimed impedance cardiography measurements.

    PubMed

    Kauppinen, P; Kööbi, T; Kaukinen, S; Hyttinen, J; Malmivuo, J

    1999-01-01

    Conventional impedance cardiography (ICG) methods estimate parameters related to the function of the heart from a single waveform that reflects an integrated combination of complex sources. We have previously developed methods and tools for calculating measurement sensitivity distributions of ICG electrode configurations. In this study, the methods were applied to investigate the prospects of recording multiple aimed ICG waveforms utilizing the 12-lead electrocardiography (ECG) electrode locations. Three anatomically realistic volume conductor models were used: one based on Visible Human Man cryosection data and two on magnetic resonance (MR) images representing end diastolic and end systolic phases of the cardiac cycle. Based on the sensitivity distributions obtained, 236 electrode configurations were selected for preliminary clinical examination on 12 healthy volunteers and 9 valvular patients. The model study suggested that a variety of configurations had clearly enhanced sensitivity to the cardiovascular structures as compared to conventional ICGs. Simulation data and clinical experiments showed logical correspondence supporting the theoretically predicted differences between the configurations. Recorded 12-lead ICG signals had characteristic waveforms and landmarks not coinciding with those of conventional ICG. Furthermore, configurations showing resemblance to invasive data and morphological variations in disease are of interest. The results indicate the applicability of the modelling approach in developing ICG measurement configurations. However, the level of clinical relevance and potential of the 12-lead method remains to be explored in studies employing dynamic modelling and acquisition of invasive reference data. PMID:10627950

  5. POMK mutations disrupt muscle development leading to a spectrum of neuromuscular presentations

    PubMed Central

    Di Costanzo, Stefania; Balasubramanian, Anuradha; Pond, Heather L.; Rozkalne, Anete; Pantaleoni, Chiara; Saredi, Simona; Gupta, Vandana A.; Sunu, Christine M.; Yu, Timothy W.; Kang, Peter B.; Salih, Mustafa A.; Mora, Marina; Gussoni, Emanuela; Walsh, Christopher A.; Manzini, M. Chiara

    2014-01-01

    Dystroglycan is a transmembrane glycoprotein whose interactions with the extracellular matrix (ECM) are necessary for normal muscle and brain development, and disruptions of its function lead to dystroglycanopathies, a group of congenital muscular dystrophies showing extreme genetic and clinical heterogeneity. Specific glycans bound to the extracellular portion of dystroglycan, α-dystroglycan, mediate ECM interactions and most known dystroglycanopathy genes encode glycosyltransferases involved in glycan synthesis. POMK, which was found mutated in two dystroglycanopathy cases, is instead involved in a glycan phosphorylation reaction critical for ECM binding, but little is known about the clinical presentation of POMK mutations or of the function of this protein in the muscle. Here, we describe two families carrying different truncating alleles, both removing the kinase domain in POMK, with different clinical manifestations ranging from Walker–Warburg syndrome, the most severe form of dystroglycanopathy, to limb-girdle muscular dystrophy with cognitive defects. We explored POMK expression in fetal and adult human muscle and identified widespread expression primarily during fetal development in myocytes and interstitial cells suggesting a role for this protein during early muscle differentiation. Analysis of loss of function in the zebrafish embryo and larva showed that pomk function is necessary for normal muscle development, leading to locomotor dysfuction in the embryo and signs of muscular dystrophy in the larva. In summary, we defined diverse clinical presentations following POMK mutations and showed that this gene is necessary for early muscle development. PMID:24925318

  6. Development, Characterization and Piezoelectric Fatigue Behavior of Lead-Free Perovskite Piezoelectric Ceramics

    NASA Astrophysics Data System (ADS)

    Patterson, Eric Andrew

    Much recent research has focused on the development lead-free perovskite piezoelectrics as environmentally compatible alternatives to lead zirconate titanate (PZT). Two main categories of lead free perovskite piezoelectric ceramic systems were investigated as potential replacements to lead zirconate titanate (PZT) for actuator devices. First, solid solutions based on Li, Ta, and Sb modified (K0.5Na0.5)NbO3 (KNN) lead-free perovskite systems were created using standard solid state methods. Secondly, Bi-based materials a variety of compositions were explored for (1-x)(Bi 0.5Na0.5)TiO3-xBi(Zn0.5Ti0.5)O 3 (BNT-BZT) and Bi(Zn0.5Ti0.5)O3-(Bi 0.5K0.5)TiO3-(Bi0.5Na0.5)TiO 3 (BZT-BKT-BNT). It was shown that when BNT-BKT is combined with increasing concentrations of Bi(Zn1/2i1/2)O3 (BZT), a transition from normal ferroelectric behavior to a material with large electric field induced strains was observed. The higher BZT containing compositions are characterized by large hysteretic strains(> 0.3%) with no negative strains that might indicate domain switching. This work summarizes and analyzes the fatigue behavior of the new generation of Pb-free piezoelectric materials. In piezoelectric materials, fatigue is observed as a degradation in the electromechanical properties under the application of a bipolar or unipolar cyclic electrical load. In Pb-based materials such as lead zirconate titanate (PZT), fatigue has been studied in great depth for both bulk and thin film applications. In PZT, fatigue can result from microcracking or electrode effects (especially in thin films). Ultimately, however, it is electronic and ionic point defects that are the most influential mechanism. Therefore, this work also analyzes the fatigue characteristics of bulk polycrystalline ceramics of the modified-KNN and BNT-BKT-BZT compositions developed. The defect chemistry that underpins the fatigue behavior will be examined and the results will be compared to the existing body of work on PZT. It will

  7. Project Morpheus: Lessons Learned in Lander Technology Development

    NASA Technical Reports Server (NTRS)

    Olansen, Jon B.; Munday, Stephen R.; Mitchell, Jennifer D.

    2013-01-01

    NASA's Morpheus Project has developed and tested a prototype planetary lander capable of vertical takeoff and landing, that is designed to serve as a testbed for advanced spacecraft technologies. The lander vehicle, propelled by a LOX/Methane engine and sized to carry a 500kg payload to the lunar surface, provides a platform for bringing technologies from the laboratory into an integrated flight system at relatively low cost. Designed, developed, manufactured and operated in-house by engineers at Johnson Space Center, the initial flight test campaign began on-site at JSC less than one year after project start. After two years of testing, including two major upgrade periods, and recovery from a test crash that caused the loss of a vehicle, flight testing will evolve to executing autonomous flights simulating a 500m lunar approach trajectory, hazard avoidance maneuvers, and precision landing, incorporating the Autonomous Landing and Hazard Avoidance (ALHAT) sensor suite. These free-flights are conducted at a simulated planetary landscape built at Kennedy Space Center's Shuttle Landing Facility. The Morpheus Project represents a departure from recent NASA programs and projects that traditionally require longer development lifecycles and testing at remote, dedicated testing facilities. This paper expands on the project perspective that technologies offer promise, but capabilities offer solutions. It documents the integrated testing campaign, the infrastructure and testing facilities, and the technologies being evaluated in this testbed. The paper also describes the fast pace of the project, rapid prototyping, frequent testing, and lessons learned during this departure from the traditional engineering development process at NASA's Johnson Space Center.

  8. Arsenic Removal from Drinking Water by Adsorptive Media, U.S. EPA Demonstration Project at Lead, South Dakota - Final Performance Evaluation Report

    EPA Science Inventory

    This report documents the activities performed and the results obtained from the arsenic removal treatment technology demonstration project at Lead, South Dakota. The main objective of the project was to evaluate the effectiveness of SolmeteX’s adsorptive media system in removin...

  9. Project Coach: Youth Development and Academic Achievement through Sport

    ERIC Educational Resources Information Center

    Intrator, Sam M.; Siegel, Donald

    2008-01-01

    Researchers and educators have long tried to find the connection between participation in sport-related activities and academic and social development among youths. This article traces the conceptual ideas that led to the design of an after-school sports program (Project Coach). This program promotes positive youth and community development…

  10. 18 CFR 2.7 - Recreational development at licensed projects.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Recreational development at licensed projects. 2.7 Section 2.7 Conservation of Power and Water Resources FEDERAL ENERGY... for facilities to process adequately sewage, litter, and other wastes from recreation...

  11. 18 CFR 2.7 - Recreational development at licensed projects.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Recreational development at licensed projects. 2.7 Section 2.7 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES GENERAL POLICY AND INTERPRETATIONS Statements of General Policy and Interpretations Under...

  12. 18 CFR 2.7 - Recreational development at licensed projects.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Recreational development at licensed projects. 2.7 Section 2.7 Conservation of Power and Water Resources FEDERAL ENERGY... for facilities to process adequately sewage, litter, and other wastes from recreation...

  13. 18 CFR 2.7 - Recreational development at licensed projects.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Recreational development at licensed projects. 2.7 Section 2.7 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES GENERAL POLICY AND INTERPRETATIONS Statements of General Policy and Interpretations Under...

  14. 18 CFR 2.7 - Recreational development at licensed projects.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Recreational development at licensed projects. 2.7 Section 2.7 Conservation of Power and Water Resources FEDERAL ENERGY... for facilities to process adequately sewage, litter, and other wastes from recreation...

  15. Current Status of the Physics Computer Development Project.

    ERIC Educational Resources Information Center

    Bork, Alfred

    With support from the National Science Foundation and the University of California, the Physics Computer Development Project have produced in the last six years computer based material in a wide variety of modes. Among the major products are science learning dialogs, graphic additions to APL (A Programming Language), the underlying software, and…

  16. Impact Evaluation of National Writing Project Professional Development Program

    ERIC Educational Resources Information Center

    Gallagher, H. Alix; Woodworth, Katrina; McCaffrey, Teresa; Park, Christina J.; Wang, Haiwen

    2014-01-01

    Improving teacher effectiveness is a key strategy to ensure student readiness for college and careers and to address achievement gaps and persistent low performance. In response to the new Common Core State Standards for English Language Arts (CCSS-ELA) the National Writing Project (NWP) created a professional development (PD) program to support…

  17. Accessing Curriculum Through Technology Tools (ACTTT): A Model Development Project

    ERIC Educational Resources Information Center

    Daytner, Katrina M.; Johanson, Joyce; Clark, Letha; Robinson, Linda

    2012-01-01

    Accessing Curriculum Through Technology Tools (ACTTT), a project funded by the U.S. Office of Special Education Programs (OSEP), developed and tested a model designed to allow children in early elementary school, including those "at risk" and with disabilities, to better access, participate in, and benefit from the general curriculum. Children in…

  18. Promoting and Investing in Early Childhood Development Projects.

    ERIC Educational Resources Information Center

    Seng, Seok Hoon

    This paper describes the impact of three early childhood education research programs in Australia, Singapore, and Malaysia, and funded by the Bernard van Leer Foundation. The Mount Druitt Project in Australia has implemented institution- and home-based educational programs, which also monitor children's physical development and work closely with…

  19. Higher Education at a Distance: Developments and Projects in Germany

    ERIC Educational Resources Information Center

    Heidt, Erhard U.

    1975-01-01

    A case study in the planning for a possible distance-study system in Germany. Three project areas are described (the Quadringa radio colleges, the German Institute of Distance Study, and multi-media study teams in universities). Efforts to establish a national system are analyzed and compared to the development of Britain's Open University. (JT)

  20. A Coordinated Decentralized Approach to Online Project Development

    ERIC Educational Resources Information Center

    Mykota, David

    2013-01-01

    With the growth rate of online learning outpacing traditional face-to-face instruction, universities are beginning to recognize the importance of strategic planning in its development. Making the case for online learning requires sound project management practices and an understanding of the business models on which it is predicated. The objective…

  1. The YouthARTS Development Project. Juvenile Justice Bulletin.

    ERIC Educational Resources Information Center

    Clawson, Heather J.; Coolbaugh, Kathleen

    The arts enrich the culture and individual lives immeasurably, but what impact do arts-based programs have in preventing juvenile delinquency? To address this question, the YouthARTS Development Project, with the technical assistance of the Office of Juvenile Justice and Delinquency Prevention (OJJDP), brought together Federal agencies, national…

  2. International Projects Development: From Decision Cycle to Overseas Reality.

    ERIC Educational Resources Information Center

    Franklyn, Gaston J.

    The major elements of the industry-based planning process can be successfully applied to the development and implementation of international projects in educational institutions. International education programs share the following fundamental structural elements with business and industry: they compete in the market place, and exist by managing…

  3. Supporting Moral Development: The Virtues Project[TM

    ERIC Educational Resources Information Center

    de Moor, Gerrit

    2011-01-01

    The Virtues Project[TM] was founded in Canada in 1991 by Linda Kavelin Popov, Dan Popov, and John Kavelin who were concerned about the level of violence among families and youth. In studying sacred traditions and cultures around the world, they identified a set of common virtues. These were used to develop a pedagogical model that has applications…

  4. Development of Home Health Aide Curriculum Project. Final Report.

    ERIC Educational Resources Information Center

    Brown, Patricia

    This package contains materials intended for use in a new home health aide curriculum that is designed to be presented as a two-quarter program at Tacoma Community College in Tacoma, Washington. Included in the package are a final report outlining the objectives and outcomes of the project to develop a home health aide curriculum that would meet…

  5. Developing a CWIS--It's Not a Computing Center Project.

    ERIC Educational Resources Information Center

    Smith, Carol L.; Nealon, Bonnie M.

    In December 1994, DePauw University (Greencastle, Indiana) began developing plans for creating its World Wide Web-based campus wide information system (CWIS), DePauwINFO. Thirteen team members were recruited whose interests were intentionally diverse to ensure a broad representation of the entire campus community. A project timeline was proposed…

  6. Solicitation - Geothermal Drilling Development and Well Maintenance Projects

    SciTech Connect

    Sattler, A.R.

    1999-07-07

    Energy (DOE)-industry research and development (R and D) organization, sponsors near-term technology development projects for reducing geothermal drilling and well maintenance costs. Sandia National Laboratories (Albuquerque, NM) administers DOE funds for GDO cost-shared projects and provides technical support. The GDO serves a very important function in fostering geothermal development. It encourages commercialization of emerging, cost-reducing drilling technologies, while fostering a spirit of cooperation among various segments of the geothermal industry. For Sandia, the GDO also serves as a means of identifying the geothermal industry's drilling fuel/or well maintenance problems, and provides an important forum for technology transfer. Successfully completed GDO projects include: the development of a high-temperature borehole televiewer, high-temperature rotating head rubbers, a retrievable whipstock, and a high-temperature/high-pressure valve-changing tool. Ongoing GDO projects include technology for stemming lost circulation; foam cement integrity log interpretation, insulated drill pipe, percussive mud hammers for geothermal drilling, a high-temperature/ high-pressure valve changing tool assembly (adding a milling capability), deformed casing remediation, high- temperature steering tools, diagnostic instrumentation for casing in geothermal wells, and elastomeric casing protectors.

  7. Making Online Professional Development Work for Florida Project Learning Tree

    ERIC Educational Resources Information Center

    McConnell, Lindsey C.; Monroe, Martha C.

    2012-01-01

    Large distances and small budgets had made it challenging for Florida Project Learning Tree (PLT) to conduct in-person workshops with volunteer 4-H leaders to disseminate the PreK-8 guide. An online version of a PLT workshop was developed to overcome these barriers. Formative evaluation data suggested that the program effectively introduced PLT to…

  8. Identifying, Measuring and Monitoring Value during Project Development

    ERIC Educational Resources Information Center

    Kliniotou, Maria

    2004-01-01

    This paper describes the findings of the research done by Loughborough University in conjunction with ten construction industry collaborators in an attempt to identify what construction professionals mean by value. The aim of the research is to establish a common approach to identify value in projects and to monitor its development throughout the…

  9. Teacher Development Program for ATP 2000. Project Report.

    ERIC Educational Resources Information Center

    Sutphin, Dean; And Others

    Agri Tech Prep 2000 (ATP 2000) is a 4-year tech prep program linking high school and postsecondary curricula designed to prepare New York students for careers in agriculture or acceptance into a college program in agriculture. Because teacher development was designated an integral project component for fiscal year 1991-1992, a weeklong teacher…

  10. Impact of Personal Growth Projects on Leadership Identity Development

    ERIC Educational Resources Information Center

    Odom, Summer F.; Boyd, Barry L.; Williams, Jennifer

    2012-01-01

    Within personal leadership education courses, leadership educators should include experiences which help students develop themselves as leaders. In this article, the authors discuss results from a qualitative research study involving the analysis of Personal Growth Project (PGP) assignments in a personal leadership education collegiate course. The…

  11. Career Development Project for Incarcerated Youth: Preparing for the Future

    ERIC Educational Resources Information Center

    Moody, Barbara; Kruse, Gordon; Nagel, Jeffrey; Conlon, Bill

    2008-01-01

    This qualitative study examined student perceptions of the Career Development curriculum used at Robert Farrell School. Students at Robert Farrell School are required to complete a career project to fulfill the Oregon State requirement that students demonstrate career skills to earn a high school diploma. There is substantial evidence indicating…

  12. World Geography. The Port of Baltimore Workplace Skills Development Project.

    ERIC Educational Resources Information Center

    Walker, Sam

    This set of learning modules was developed during a project to deliver workplace literacy instruction to individuals employed in the more than 50 businesses related to the activities of the Port of Baltimore. It is intended to accomplish the following objectives: familiarize students with basic concepts of geography; give students knowledge of…

  13. Histological study on hippocampus, amygdala and cerebellum following low lead exposure during prenatal and postnatal brain development in rats.

    PubMed

    Barkur, Rajashekar Rao; Bairy, Laxminarayana K

    2016-06-01

    Neuropsychological studies in children who are exposed to lead during their early brain development have shown to develop behavioural and cognitive deficit. The aim of the present study was to assess the cellular damage in hippocampus, amygdala and cerebellum of rat pups exposed to lead during different periods of early brain development. Five groups of rat pups were investigated. (a) Control group (n = 8) (mothers of these rats were given normal drinking water throughout gestation and lactation), (b) pregestation lead-exposed group (n = 8) (mothers of these rats were exposed to 0.2% lead acetate in the drinking water for one month before conception), (c) gestation lead-exposed group (n = 8) (exposed to 0.2% lead acetate in the drinking water through the mother throughout gestation [gestation day 01 to day 21]), (d) lactation lead-exposed group (n = 8) (exposed to 0.2% lead acetate in the drinking water through the mother throughout lactation [postnatal day 01 to day 21]) and (e) gestation and lactation lead-exposed group (n = 8) (exposed to 0.2% lead acetate throughout gestation and lactation). On postnatal day 30, rat pups of all the groups were killed. Numbers of surviving neurons in the hippocampus, amygdala and cerebellum regions were counted using cresyl violet staining technique. Histological data indicate that lead exposure caused significant damage to neurons of hippocampus, amygdala and cerebellum regions in all lead-exposed groups except lactation lead-exposed group. The extent of damage to neurons of hippocampus, amygdala and cerebellum regions in lactation lead-exposed group was comparable to gestation and lactation groups even though the duration of lead exposure was much less in lactation lead-exposed group. To conclude, the postnatal period of brain development seems to be more vulnerable to lead neurotoxicity compared to prenatal period of brain development. PMID:25147304

  14. Materials Development Program: Ceramic Technology Project bibliography, 1984--1992

    SciTech Connect

    Not Available

    1994-03-01

    The Ceramic Technology [for Advanced Heat Engines] Project was begun in 1983 to meet the ceramic materials needs of the companion DOE automotive engine program, the Advanced Gas Turbine (AGT) project, and the Heavy Duty Transport (low-heat-rejection, heavy-duty diesel) project. Goal is to develop an industry technology base for reliable and cost effective ceramics for applications in advanced automotive gas turbine and diesel engines. Research areas were identified following extensive input from industry and academia. Majority of research is done by industry (60%); work is also done at colleges and universities, in-house, and at other national laboratories and government agencies. In the beginning, reliability of ceramic components was the key issue. The reliability issues have largely been met and, at the present time, cost is the driving issue, especially in light of the highly cost-sensitive automotive market. Emphasis of the program has now been shifted toward developing cost-effective ceramic components for high-performance engines in the near-term. This bibliography is a compilation of publications done in conjunction with the Ceramic Technology Project since its beginning. Citations were obtained from reports done by participants in the project. We have tried to limit citations to those published and easily located. The end date of 1992 was selected.

  15. Brain-specific Crmp2 deletion leads to neuronal development deficits and behavioural impairments in mice

    PubMed Central

    Zhang, Hongsheng; Kang, Eunchai; Wang, Yaqing; Yang, Chaojuan; Yu, Hui; Wang, Qin; Chen, Zheyu; Zhang, Chen; Christian, Kimberly M.; Song, Hongjun; Ming, Guo-li; Xu, Zhiheng

    2016-01-01

    Several genome- and proteome-wide studies have associated transcription and translation changes of CRMP2 (collapsing response mediator protein 2) with psychiatric disorders, yet little is known about its function in the developing or adult mammalian brain in vivo. Here we show that brain-specific Crmp2 knockout (cKO) mice display molecular, cellular, structural and behavioural deficits, many of which are reminiscent of neural features and symptoms associated with schizophrenia. cKO mice exhibit enlarged ventricles and impaired social behaviour, locomotor activity, and learning and memory. Loss of Crmp2 in the hippocampus leads to reduced long-term potentiation, abnormal NMDA receptor composition, aberrant dendrite development and defective synapse formation in CA1 neurons. Furthermore, knockdown of crmp2 specifically in newborn neurons results in stage-dependent defects in their development during adult hippocampal neurogenesis. Our findings reveal a critical role for CRMP2 in neuronal plasticity, neural function and behavioural modulation in mice. PMID:27249678

  16. Brain-specific Crmp2 deletion leads to neuronal development deficits and behavioural impairments in mice.

    PubMed

    Zhang, Hongsheng; Kang, Eunchai; Wang, Yaqing; Yang, Chaojuan; Yu, Hui; Wang, Qin; Chen, Zheyu; Zhang, Chen; Christian, Kimberly M; Song, Hongjun; Ming, Guo-Li; Xu, Zhiheng

    2016-01-01

    Several genome- and proteome-wide studies have associated transcription and translation changes of CRMP2 (collapsing response mediator protein 2) with psychiatric disorders, yet little is known about its function in the developing or adult mammalian brain in vivo. Here we show that brain-specific Crmp2 knockout (cKO) mice display molecular, cellular, structural and behavioural deficits, many of which are reminiscent of neural features and symptoms associated with schizophrenia. cKO mice exhibit enlarged ventricles and impaired social behaviour, locomotor activity, and learning and memory. Loss of Crmp2 in the hippocampus leads to reduced long-term potentiation, abnormal NMDA receptor composition, aberrant dendrite development and defective synapse formation in CA1 neurons. Furthermore, knockdown of crmp2 specifically in newborn neurons results in stage-dependent defects in their development during adult hippocampal neurogenesis. Our findings reveal a critical role for CRMP2 in neuronal plasticity, neural function and behavioural modulation in mice. PMID:27249678

  17. Environmental impacts of dispersed development from federal infrastructure projects.

    PubMed

    Southerland, Mark T

    2004-06-01

    Dispersed development, also referred to as urban growth or sprawl, is a pattern of low-density development spread over previously rural landscapes. Such growth can result in adverse impacts to air quality, water quality, human health, aquatic and terrestrial ecosystems, agricultural land, military training areas, water supply and wastewater treatment, recreational resources, viewscapes, and cultural resources. The U.S. Environmental Protection Agency (U.S. EPA) is charged with protecting public health and the environment, which includes consideration of impacts from dispersed development. Specifically, because federal infrastructure projects can affect the progress of dispersed development, the secondary impacts resulting from it must be assessed in documents prepared under the National Environmental Policy Act (NEPA). The Council on Environmental Quality (CEQ) has oversight for NEPA and Section 309 of the Clean Air Act requires that U.S. EPA review and comment on federal agency NEPA documents. The adverse effects of dispersed development can be induced by federal infrastructure projects including transportation, built infrastructure, modifications in natural infrastructure, public land conversion and redevelopment of properties, construction of federal facilities, and large traffic or major growth generation developments requiring federal permits. This paper presents an approach that U.S. EPA reviewers and NEPA practitioners can use to provide accurate, realistic, and consistent analysis of secondary impacts of dispersed development resulting from federal infrastructure projects. It also presents 24 measures that can be used to mitigate adverse impacts from dispersed development by modifying project location and design, participating in preservation or restoration activities, or informing and supporting local communities in planning. PMID:15141453

  18. DOE-University of Arizona Faculty Development Project. Final report

    SciTech Connect

    Fillerup, Joseph M.

    1980-09-08

    The DOE-University of Arizona Faculty Development Project on Energy successfully completed a faculty development program. There were three phases of the program consisting of: a three week energy workshop for teachers, participation and cooperation with Students for Safe Energy in presentation of an Alternative Energy Festival at the University of Arizona, and workshops for teachers conducted at Flowing Wells School District. Each of these is described. Attendees are listed and a director's evaluation of the workshop is given.

  19. Development of lead-free copper alloy graphite castings. Annual report, January--December 1995

    SciTech Connect

    Rohatgi, P.K.

    1996-10-01

    The distribution of graphite particles in graphite containing copper alloy was further improved very significantly using several procedures and technological modifications. The developed techniques attacked the graphite distribution problem in two ways. Realizing that clustering of very fine (5um) graphite particles is one of the two major problems, a pretreatment process has been developed using aluminum powders to deagglomerate graphite particles. Along with this, a two-stage stirring technique was used to first incorporate and then to distribute uniformly the deagglomerated particles in the melt. During this year, based on these developments, several components were cast to evaluate the castability of Cu alloy-graphite melts. In addition, machinability tests were done to clearly established that addition of graphite particles improve the machinability of copper MMC alloys over and above that of monolithic copper alloys. The results show that the machining chip sizes and cutting forces of Cu alloys containing graphite particles are smaller than these of the corresponding monolithic Cu alloys. This clearly establishes that the presence of graphite particles in copper alloy improves the machinability in a fashion similar to lead additions to copper alloys. Centrifugal casting of shapes of different sizes appear to be a very attractive method for casting graphite containing copper alloys, since all the graphite particles (regardless of their distribution in the melt) are forced to segregate to the inner periphery of the castings where they impart a very desirable solid lubrication property for bushing and bearing use. A very large number of cylindrical elements of lead bearing copper alloys are now used for similar bearing bushing applications and the manufacturers of these type of bearings are under safety and health hazard pressure to remove lead. This year several parameters for centrifugal casting of copper graphite alloys have been established.

  20. Initial development of an ablative leading edge for the space shuttle orbiter

    NASA Technical Reports Server (NTRS)

    Daforno, G.; Rose, L.; Graham, J.; Roy, P.

    1974-01-01

    A state-of-the-art preliminary design for typical wing areas is developed. Seven medium-density ablators (with/without honeycomb, flown on Apollo, Prime, X15A2) are evaluated. The screening tests include: (1) leading-edge models sequentially subjected to ascent heating, cold soak, entry heating, post-entry pressure fluctuations, and touchdown shock, and (2) virgin/charred models subjected to bondline strains. Two honeycomb reinforced 30 pcf elastomeric ablators were selected. Roughness/recession degradation of low speed aerodynamics appears acceptable. The design, including attachments, substructure and joints, is presented.

  1. Development of 36-V valve-regulated lead-acid battery

    NASA Astrophysics Data System (ADS)

    Ohmae, T.; Hayashi, T.; Inoue, N.

    A 36-V valve-regulated lead-acid (VRLA) battery used in a 42-V power system has been developed for the Toyota Hybrid System-Mild (THS-M) vehicle to meet the large electrical power requirements of hybrid electric vehicles (HEVs) and the increasing power demands on modern automobile electrical systems. The battery has a longer cycle-life in HEV use through the application of ultra high-density active-material and an anti-corrosive grid alloy for the positive plates, special additives for the negative plates, and absorbent glass mat with less contraction for the separators.

  2. Alkaloids from marine invertebrates as important leads for anticancer drugs discovery and development.

    PubMed

    Imperatore, Concetta; Aiello, Anna; D'Aniello, Filomena; Senese, Maria; Menna, Marialuisa

    2014-01-01

    The present review describes research on novel natural antitumor alkaloids isolated from marine invertebrates. The structure, origin, and confirmed cytotoxic activity of more than 130 novel alkaloids belonging to several structural families (indoles, pyrroles, pyrazines, quinolines, and pyridoacridines), together with some of their synthetic analogs, are illustrated. Recent discoveries concerning the current state of the potential and/or development of some of them as new drugs, as well as the current knowledge regarding their modes of action, are also summarized. A special emphasis is given to the role of marine invertebrate alkaloids as an important source of leads for anticancer drug discovery. PMID:25490431

  3. Development of maintenance-free dry calcium (MFDC) lead-acid battery for automotive use

    NASA Astrophysics Data System (ADS)

    Yoshimura, Tsunenori; Yasuda, Hiroshi

    A maintenance-free, dry calcium (MFDC) developed by the Panasonic Battery (Thailand) Co. Ltd. The battery is designed for automotive applications and is ready for use upon injection of the electrolyte. The MFDC battery employs grids made from a lead-calcium-based alloy. This feature suppresses undesirable loss of electrolyte and enables good recovery of capacity after a long time of storage or a long cycle-life. Moreover, the batteries is a dry-charged type and requires only a low frequency of recharging due to its suppressed self-discharge during storage. Transportation costs are reduced as the battery contains only a small amount of electrolyte during storage.

  4. LFC leading edge glove flight: Aircraft modification design, test article development and systems integration

    NASA Technical Reports Server (NTRS)

    Etchberger, F. R.

    1983-01-01

    Reduction of skin friction drag by suction of boundary layer air to maintain laminar flow has been known since Prandtl's published work in 1904. The dramatic increases in fuel costs and the potential for periods of limited fuel availability provided the impetus to explore technologies to reduce transport aircraft fuel consumption. NASA sponsored the Aircraft Energy Efficiency (ACEE) program in 1976 to develop technologies to improve fuel efficiency. This report documents the Lockheed-Georgia Company accomplishments in designing and fabricating a leading-edge flight test article incorporating boundary layer suction slots to be flown by NASA on their modified JetStar aircraft. Lockheed-Georgia Company performed as the integration contractor to design the JetStar aircraft modification to accept both a Lockheed and a McDonnell Douglas flight test article. McDonnell Douglas uses a porous skin concept. The report describes aerodynamic analyses, fabrication techniques, JetStar modifications, instrumentation requirements, and structural analyses and testing for the Lockheed test article. NASA will flight test the two LFC leading-edge test articles in a simulated commercial environment over a 6 to 8 month period in 1984. The objective of the flight test program is to evaluate the effectiveness of LFC leading-edge systems in reducing skin friction drag and consequently improving fuel efficiency.

  5. Managing environmental issues during international electric power project development

    SciTech Connect

    Cooper, H.W.

    1998-07-01

    Responsible international project developers most often view environmental matters with quite mixed emotions. Those with whom Dynalytics has worked would certainly never contemplate jeopardizing the health of anyone in the world. But while they want their projects realized, and are willing to implement reasonable requirements, they are often asked to do more than is appropriate, more than is technologically possible, and more than is financially possible. The paper discusses the following: who is in charge of environmental matters; whose environmental standards apply; the role of technology; accelerating timetables and reducing costs; documentation and applications; and post-construction requirements.

  6. Water development projects and marital violence: experiences from rural Bangladesh.

    PubMed

    Karim, K M Rabiul; Emmelin, Maria; Resurreccion, Bernadette P; Wamala, Sarah

    2012-01-01

    In this study, we explored the implications of a groundwater development project on women's workload and their experience of marital violence in a Bangladesh village. We believe that the project facilitated irrigation water but also that it resulted in seasonal domestic water shortages. Men used deep motorized pumps for irrigation, and women used shallow handpumps for domestic purposes. Many handpumps dried out, so women had to walk to distant wells. This increased their workload and challenged their possibilities of fulfilling household obligations, thereby increasing the risk of normative marital male violence against women as a punishment for their failure. PMID:22325022

  7. Final project report: High energy rotor development, test and evaluation

    SciTech Connect

    1996-09-01

    Under the auspices of the {open_quotes}Government/Industry Wind Technology Applications Project{close_quotes} [{open_quotes}Letter of Interest{close_quotes} (LOI) Number RC-1-11101], Flo Wind Corp. has successfully developed, tested, and delivered a high-energy rotor upgrade candidate for their 19-meter Vertical Axis Wind Turbine. The project included the demonstration of the innovative extended height-to-diameter ratio concept, the development of a continuous span single-piece composite blade, the demonstration of a continuous blade manufacturing technique, the utilization of the Sandia National Laboratories developed SNLA 2150 natural laminar flow airfoil and the reuse of existing wind turbine and wind power plant infrastructure.

  8. Hierarchy Software Development Framework (h-dp-fwk) project

    NASA Astrophysics Data System (ADS)

    Zaytsev, A.

    2010-04-01

    Hierarchy Software Development Framework provides a lightweight tool for building portable modular applications for performing automated data analysis tasks in a batch mode. The history of design and development activities devoted to the project has begun in March 2005 and from the very beginning it was targeting the case of building experimental data processing applications for the CMD-3 experiment which is being commissioned at Budker Institute of Nuclear Physics (BINP, Novosibirsk, Russia). Its design addresses the generic case of modular data processing application operating within the well defined distributed computing environment. The main features of the framework are modularity, built-in message and data exchange mechanisms, XInclude and XML schema enabled XML configuration management tools, dedicated log management tools, internal debugging tools, both dynamic and static module chains support, internal DSO version and consistency checking, well defined API for developing specialized frameworks. It is supported on Scientific Linux 4 and 5 and planned to be ported to other platforms as well. The project is provided with the comprehensive set of technical documentation and users' guides. The licensing schema for the source code, binaries and documentation implies that the product is free for non-commercial use. Although the development phase is not over and many features are to be implemented yet the project is considered ready for public use and creating applications in various fields including development of events reconstruction software for small and moderate scale HEP experiments.

  9. Development and Application of New Quality Model for Software Projects

    PubMed Central

    Karnavel, K.; Dillibabu, R.

    2014-01-01

    The IT industry tries to employ a number of models to identify the defects in the construction of software projects. In this paper, we present COQUALMO and its limitations and aim to increase the quality without increasing the cost and time. The computation time, cost, and effort to predict the residual defects are very high; this was overcome by developing an appropriate new quality model named the software testing defect corrective model (STDCM). The STDCM was used to estimate the number of remaining residual defects in the software product; a few assumptions and the detailed steps of the STDCM are highlighted. The application of the STDCM is explored in software projects. The implementation of the model is validated using statistical inference, which shows there is a significant improvement in the quality of the software projects. PMID:25478594

  10. Two stages in the development of a mammalian retinocollicular projection.

    PubMed

    Mark, R F; Freeman, T C; Ding, Y; Marotte, L R

    1993-11-18

    The retinocollicular projection in the marsupial mammal the wallaby Macropus eugenii, has been investigated anatomically to determine the order in the developing projection and electrophysiologically to determine the time of onset of synaptic transmission by recording evoked potentials in the colliculus in response to stimulation of the optic nerve. There are two clear stages: a protracted period when retinal axons grow into the colliculus in coarse retinotopic order with no recordable electrical activity followed by the formation of terminal zones in retinotopically correct positions, the loss of more widely distributed axons and the onset of evoked potentials. The two stages are not seen in non-mammalian vertebrates where the projection is functional from the beginning. PMID:8110999

  11. Zika Virus Disrupts Neural Progenitor Development and Leads to Microcephaly in Mice.

    PubMed

    Li, Cui; Xu, Dan; Ye, Qing; Hong, Shuai; Jiang, Yisheng; Liu, Xinyi; Zhang, Nana; Shi, Lei; Qin, Cheng-Feng; Xu, Zhiheng

    2016-07-01

    The link between Zika virus (ZIKV) infection and microcephaly has raised urgent global alarm. The historical African ZIKV MR766 was recently shown to infect cultured human neural precursor cells (NPCs), but unlike the contemporary ZIKV strains, it is not believed to cause microcephaly. Here we investigated whether the Asian ZIKV strain SZ01 could infect NPCs in vivo and affect brain development. We found that SZ01 replicates efficiently in embryonic mouse brain by directly targeting different neuronal linages. ZIKV infection leads to cell-cycle arrest, apoptosis, and inhibition of NPC differentiation, resulting in cortical thinning and microcephaly. Global gene expression analysis of infected brains reveals upregulation of candidate flavirus entry receptors and dysregulation of genes associated with immune response, apoptosis, and microcephaly. Our model provides evidence for a direct link between Zika virus infection and microcephaly, with potential for further exploration of the underlying mechanisms and management of ZIKV-related pathological effects during brain development. PMID:27179424

  12. Leading in practice: a case study of how health visitors share and develop good practice.

    PubMed

    Brigham, Lindsay; Maxwell, Claire; Smith, Ann

    2012-05-01

    The aim of this study was to find out more about health visitors' current situated practice in the context of national policy drivers outlining a new lead role for them in delivering co-ordinated and integrated services for children and families, tailored to local needs. The study focused on health visitors within a recently merged primary care trust and a qualitative approach was adopted with use of focus groups to generate data. The transcripts were subsequently analysed for key themes and dimensions. These related to how health visitors defined their own role and the skills with which they carried it out, the development of their expertise, role tensions and factors affecting leadership development. By drawing together the grounded experience of health visitors, policy drivers and theoretical interpretations a rich picture of existing practices was established, with recommendations made to promote distributed leadership and change. PMID:22792841

  13. Research, development and demonstration of advanced lead-acid batteries for utility load leveling

    NASA Astrophysics Data System (ADS)

    1983-08-01

    An advanced lead acid storage battery was developed to the preprototype cell and module design stage. Each module is equipped with a low cost tray, automatic watering system, and air-lift pumps for increased acid circulation in each cell. With the qualified alloy catastrophic positive grid corrosion will not limit cell cycle life. An accelerated shallow cycle regime at room ambient tested 60 cell designs for the active material shedding failure mode. It is found that an antishedding active material additive reduces positive active material shedding significantly and extend the cycle life of both the positive and the negative plate. Equations relating cell design to deep cycle life are developed from the factorial tests on the 60 cells.

  14. Maternal lead exposure during lactation persistently impairs testicular development and steroidogenesis in male offspring.

    PubMed

    Wang, Hua; Ji, Yan-Li; Wang, Qun; Zhao, Xian-Feng; Ning, Huan; Liu, Ping; Zhang, Cheng; Yu, Tao; Zhang, Ying; Meng, Xiu-Hong; Xu, De-Xiang

    2013-12-01

    Lead (Pb) is a testicular toxicant. In the present study, we investigated the effects of maternal Pb exposure during lactation on testicular development and steroidogenesis in male offspring. Maternal mice were exposed to different concentration of lead acetate (200 or 2000 ppm) through drinking water from postnatal day (PND) 0 to PND21. As expected, a high concentration of Pb was measured in the kidneys and liver of pups whose mothers were exposed to Pb during lactation. In addition, maternal Pb exposure during lactation elevated, to a less extent, Pb content in testes of weaning pups. Testis weight in weaning pups was significantly decreased when maternal mice were exposed to Pb during lactation. The level of serum and testicular T was reduced in Pb-exposed pups. The expression of P450scc, P450(17α) and 17β-HSD, key enzymes for T synthesis, was down-regulated in testes of weaning pups whose mothers were exposed to Pb during lactation. Interestingly, the level of serum and testicular T remained decreased in adult offspring whose mothers were exposed to Pb during lactation. Importantly, the number of spermatozoa was significantly reduced in Pb-exposed male offspring. Taken together, these results suggest that Pb could be transported from dams to pups through milk. Maternal Pb exposure during lactation persistently disrupts testicular development and steroidogenesis in male offspring. PMID:22806249

  15. Recovery and enhancement plan development for the Leading Creek watershed, Meigs County, Ohio

    SciTech Connect

    Currie, R.J.; Cherry, D.S.; Latimer, H.A.; Babendreier, J.E.; Van Hassel, J.H.

    1998-12-31

    Following the flooding of the Meigs No. 31 coal mine in Meigs County, Ohio, a proactive plan was developed to evaluate initial dewatering effects, recovery and development of a watershed enhancement plan. Approximately half of the 31-mile Leading Creek mainstem received {approximately}one billion gallons of coal mine discharge, including sludge and slurry. Damage to the stream system resulted from high conductivity ({approximately}6,000 {micro}mhos/cm), low pH (2.5--3.5), high metals (aluminum, cadmium, copper, iron and iron floc, lead, manganese, nickel and zinc) and total suspended solids. Most forms of aquatic life were depleted in the impacted areas. Four years after the incident, many forms of benthic macroinvertebrates and fish have recovered in the creek, with sediments purged of metals by stormwater events. The enhancement plan involves a reconnaissance of the creek and tributaries pinpointing areas of agricultural sedimentation and abandoned minedland discharges (AMD). Seventeen tributary and ten mainstem stations were addressed as point source discharges with water/sediment toxicity and in-situ testing of Asian clams. One-third of the stations were intermittently toxic from rainfall runoff and the degree of AMD input. Benthic macroinvertebrates in many tributaries were stressed and comprised 1--5 taxa. Erosion/sedimentation was addressed by the USEPA 1-Dimensional Hydrologic Simulation Program Fortran (HSPF) model, as well as incorporating land use management/habitat assessment, and data management by Geographical Information Systems.

  16. Development for fissile assay in recycled fuel using lead slowing down spectrometer

    SciTech Connect

    Lee, Yong Deok; Je Park, C.; Kim, Ho-Dong; Song, Kee Chan

    2013-07-01

    A future nuclear energy system is under development to turn spent fuels produced by PWRs into fuels for a SFR (Sodium Fast Reactor) through the pyrochemical process. The knowledge of the isotopic fissile content of the new fuel is very important for fuel safety. A lead slowing down spectrometer (LSDS) is under development to analyze the fissile material content (Pu{sup 239}, Pu{sup 241} and U{sup 235}) of the fuel. The LSDS requires a neutron source, the neutrons will be slowed down through their passage in a lead medium and will finally enter the fuel and will induce fission reactions that will be analysed and the isotopic content of the fuel will be then determined. The issue is that the spent fuel emits intense gamma rays and neutrons by spontaneous fission. The threshold fission detector screens the prompt fast fission neutrons and as a result the LSDS is not influenced by the high level radiation background. The energy resolution of LSDS is good in the range 0.1 eV to 1 keV. It is also the range in which the fission reaction is the most discriminating for the considered fissile isotopes. An electron accelerator has been chosen to produce neutrons with an adequate target through (e{sup -},γ)(γ,n) reactions.

  17. Development of lead-free piezoelectric thin films by pulsed laser deposition

    NASA Astrophysics Data System (ADS)

    Abazari Torghabeh, Maryam

    As a high performance piezoelectric material widely used in sensors, actuators and other electronic devices, lead zirconate titanate (PZT) ceramics have been the center of attention for many years. However, the toxicity of these materials and their exposure to the environment during processing steps, such as calcination, sintering, machining as well as problems in recycling and disposal have been major concerns regarding their usage all around the globe for the past couple of decades. Consequently, utilizing lead-based materials for many commercial applications have been recently restricted in Europe and Asia and measures are being taken in United States as well. Therefore, there is an urgent need for lead-free piezoelectrics whose properties are comparable to those of well-known PZT materials. Recently, the discovery of ultra-high piezoelectric activity in the ternary lead-free KNaNbO3-LiTaO 3-LiSbO3 (KNN-LT-LS) and (Bi,Na)TiO3-(Bi,K)TiO 3-BaTiO3 (BNT-BKT-BT) systems have given hope for alternatives to PZT. Furthermore, the demand for new generation of environment-friendly functional devices, utilizing piezoelectric materials, inspired a new surge in lead-free piezoelectric thin film research. In this study, an attempt has been made to explore the development of lead-free piezoelectric thin films by Pulsed Laser Deposition (PLD) on SrTiO 3 substrate. While the growth and development process of KNN-LT-LS thin films was the primary goal of this thesis, a preliminary effort was also made to fabricate and characterize BNT-BKT-BT thin films. In a comprehensive and systematic process optimization study in conjunction with X-ray diffractometry, the phase evolution, stoichiometry, and growth orientation of the films are monitored as a function of deposition conditions including temperature and ambient oxygen partial pressure. Processing parameters such as substrate temperature and pressure are shown to be highly dominant in determining the phase and composition of the

  18. Promoting Sustainable Development through Whole School Approaches: An International, Intercultural Teacher Education Research and Development Project

    ERIC Educational Resources Information Center

    Shallcross, Tony; Loubser, Callie; Le Roux, Cheryl; O'Donoghue, Rob; Lupele, Justin

    2006-01-01

    This paper focuses on a British Council funded Higher Education Link project involving three institutions--Manchester Metropolitan University (MMU) in the UK and two South African institutions, the University of South Africa (UNISA) and Rhodes University. The link is a research and development project that has three main research strands:…

  19. Epigenetic regulation leading to induced pluripotency drives cancer development in vivo

    SciTech Connect

    Ohnishi, Kotaro; Semi, Katsunori; Yamada, Yasuhiro

    2014-12-05

    Highlights: • Epigenetic regulation of failed reprogramming-associated cancer cells is discussed. • Similarity between pediatric cancer and reprogramming-associated cancer is discussed. • Concept for epigenetic cancer is discussed. - Abstract: Somatic cells can be reprogrammed into induced pluripotent stem cells (iPSCs) by the transient expression of reprogramming factors. During the reprogramming process, somatic cells acquire the ability to undergo unlimited proliferation, which is also an important characteristic of cancer cells, while their underlying DNA sequence remains unchanged. Based on the characteristics shared between pluripotent stem cells and cancer cells, the potential involvement of the factors leading to reprogramming toward pluripotency in cancer development has been discussed. Recent in vivo reprogramming studies provided some clues to understanding the role of reprogramming-related epigenetic regulation in cancer development. It was shown that premature termination of the in vivo reprogramming result in the development of tumors that resemble pediatric cancers. Given that epigenetic modifications play a central role during reprogramming, failed reprogramming-associated cancer development may have provided a proof of concept for epigenetics-driven cancer development in vivo.

  20.  Economic growth leads to increase of obesity and associated hepatocellular carcinoma in developing countries.

    PubMed

    Seyda Seydel, G; Kucukoglu, Ozlem; Altinbasv, Akif; Demir, O Oguz; Yilmaz, Sezai; Akkiz, Hikmet; Otan, Emrah; Sowa, Jan-Peter; Canbay, Ali

    2016-01-01

     Hepatocellular carcinoma (HCC) is the most common type of primary liver cancer and the third leading cause of cancer related death worldwide. In recent years, the prevalence of HCC has increased in both developing and developed countries. Most HCC cases develop in the presence of advanced chronic liver disease related to viral hepatitis. In particular hepatitis B virus and hepatitis C virus infections are considered as major HCC risk factors worldwide. However, current studies provide strong evidence for increasing numbers of HCC in nonalcoholic fatty liver disease (NAFLD). NAFLD represents the hepatic manifestation of metabolic syndrome which is based on obesity and insulin resistance. Epidemiologic data clearly demonstrates that NAFLD and obesity-related disorders are significant risk factors for tumor development in general and HCC in particular. As a consequence of life style changes towards higher calorie intake and less exercise, obesity and metabolic syndrome are spreading all over the world. Due to this increase in obesity and metabolic syndrome NAFLD-related HCC will become a major health care problem in the future. In conclusion, better understanding of the impact of NAFLD and obesity in the development of HCC will improve our treatment strategies of HCC and allow preventive measures. PMID:27493104

  1. Pain leads the way: the development of evidence-based medicine for pain relief.

    PubMed

    Wiffen, Phil; Moore, Andrew

    2016-07-01

    This paper describes the development of evidence based methods in pain medicine since the 1980s at the Pain Research Department of the Nuffield Department of Clinical Neurosciences, Oxford University. Pain medicine can be said to have led the way in terms of developing registers of randomized controlled trials (RCTs) and in developing appropriate methodology for assessing clinical trials and developing metanalytical techniques. This paper tells the story of that development which occurred in conjunction with the development of the Cochrane Collaboration. Pain has a larger body of evidence than many medical specialties with more than 30,000 RCTs and over 2,500 published systematic reviews. Our work continues to raise methodological challenges and a number of key ones are described: Size: We have added to the existing literature to show that small studies overestimate treatment effects. We consider studies with less than 50 participants per treatment group to be at high risk of bias. Mean pain scores: We have shown these to be unhelpful and misleading. We illustrate that response to analgesics is a U-shaped curve with a larger proportion of participants having either a poor response or a good response. Imputation: We discuss the problems of current methods. Tiers of evidence: We propose a way to assess evidence for pain studies. Duplicate publication of data can lead to inflated benefits in systematic reviews. In addition we touch on fraud, pharmaceutical company funding. The final sections cover developments in several areas of pain medicine, and suggest some developments going forward. PMID:26932306

  2. [Anthropology and oral health projects in developing countries].

    PubMed

    Grasveld, A E

    2016-01-01

    The mouth and teeth play an important role in social interactions around the world. The way people deal with their teeth and mouth, however, is determined culturally. When oral healthcare projects are being carried out in developing countries, differing cultural worldviews can cause misunderstandings between oral healthcare providers and their patients. The oral healthcare volunteer often has to try to understand the local assumptions about teeth and oral hygiene first, before he or she can bring about a change of behaviour, increase therapy compliance and make the oral healthcare project sustainable. Anthropology can be helpful in this respect. In 2014, in a pilot project commissioned by the Dutch Dental Care Foundation, in which oral healthcare was provided in combination with anthropological research, an oral healthcare project in Kwale (Kenia) was evaluated. The study identified 6 primary themes that indicate the most important factors influencing the oral health of school children in Kwale. Research into the local culture by oral healthcare providers would appear to be an important prerequisite to meaningful work in developing countries. PMID:27430039

  3. Integrated development and testing plan for the plutonium immobilization project

    SciTech Connect

    Kan, T.

    1998-07-01

    This integrated plan for the DOE Office of Fissile Materials Disposition (MD) describes the technology development and major project activities necessary to support the deployment of the immobilization approach for disposition of surplus weapons-usable plutonium. The plan describes details of the development and testing (D&T) tasks needed to provide technical data for design and operation of a plutonium immobilization plant based on the ceramic can-in-canister technology (''Immobilization Fissile Material Disposition Program Final Immobilization Form Assessment and Recommendation'', UCRL-ID-128705, October 3, 1997). The plan also presents tasks for characterization and performance testing of the immobilization form to support a repository licensing application and to develop the basis for repository acceptance of the plutonium form. Essential elements of the plant project (design, construction, facility activation, etc.) are described, but not developed in detail, to indicate how the D&T results tie into the overall plant project. Given the importance of repository acceptance, specific activities to be conducted by the Office of Civilian Radioactive Waste Management (RW) to incorporate the plutonium form in the repository licensing application are provided in this document, together with a summary of how immobilization D&T activities provide input to the license activity. The ultimate goal of the Immobilization Project is to develop, construct, and operate facilities that will immobilize from about 18 to 50 tonnes (MT) of U.S. surplus weapons usable plutonium materials in a manner that meets the ''spent fuel'' standard (Fissile Materials Storage and Disposition Programmatic Environmental Impact Statement Record of Decision, ''Storage and Disposition Final PEIS'', issued January 14, 1997, 62 Federal Register 3014) and is acceptable for disposal in a geologic repository. In the can-in-canister technology, this is accomplished by encapsulating the plutonium

  4. Creating an ABE Network. A Staff Development Project. Final Report. A 310/Special Demonstration Project 1984-1985.

    ERIC Educational Resources Information Center

    Rio Salado Community Coll., AZ.

    A project was conducted to create a communications network for adult basic education (ABE) instructional staff and administrators throughout Arizona. Included among the major accomplishments of the project were the following: development of a statewide directory of ABE program instructors and administrators, use of the project-developed networking…

  5. ODIP - Ocean Data Interoperability Platform - developing interoperabilty Pilot project 1

    NASA Astrophysics Data System (ADS)

    Schaap, D.

    2014-12-01

    Europe, the USA, Australia and IOC/IODE are making significant progress in facilitating the discovery and access of marine data through the development, implementation, population and operation of national, regional or international distributed ocean and marine observing and data management infrastructures such as SeaDataNet, Geo-Seas, IOOS, the Australian Ocean Portal and the IODE Ocean Data Portal. All of these developments are resulting in the development and implementation of standards for the formats of metadata, data, data products, quality control methods and flags, common vocabularies. They are also providing services for data discovery, viewing and downloading, and software tools for editing, conversions, communication, analysis and presentation, all of which are increasingly being adopted and used by their national and regional marine communities.The Ocean Data Interoperability Platform (ODIP)project is supported by the EU FP7 Research Infrastructures programme, National Science Foundation (USA) and Australian government and has started 1st October 2012. ODIP includes all the major organisations engaged in ocean data management in EU, US, and Australia. ODIP is also supported by the IOC -IODE, closely linking this activity with its Ocean Data Portal (ODP) and Ocean Data Standards (ODS) projects.The ODIP platform aims to ease interoperability between the regional marine data management infrastructures. Therefore it facilitates an organised dialogue between the key infrastructure representatives by means of publishing best practice, organising international workshops and fostering the development of common standards and interoperability solutions. These are evaluated and tested by means of prototype projects. The ODIP Prototype project 1 aims at establishing interoperability between the regional EU, USA and Australia data discovery and access services (SeaDataNet CDI, US NODC, and IMOS MCP) and contributing to the global GEOSS and IODE-ODP Portals. Use is

  6. New developments of the project Learning by Research

    NASA Astrophysics Data System (ADS)

    Costa, Manuel F. M.

    2000-06-01

    In this communication we will present new results and developments of a pedagogical experiment undertaken, since 1995, within the classes of Image Processing and Fiber Optics of the Applied Physics undergraduate course of the Physics Department of the University of Minho. The simple research works undertaken by the students within the classes' frame over last three years will be briefly discussed and preliminary conclusion drawn. This `Learning by research' project relies on a major statement: the learning process requires always an active critical participation of the students. This is especially true for science and technology students. Thus to the students is given almost entire liberty and responsibility even in the process of choosing and defining the research to be undertaken. We limited ourselves to assess the development of the project orienting them and point out different or pertinent points of view when strictly necessary.

  7. Development of a Liquefied Noble Gas Time Projection Chamber

    NASA Astrophysics Data System (ADS)

    Lesser, Ezra; White, Aaron; Aidala, Christine

    2015-10-01

    Liquefied noble gas detectors have been used for various applications in recent years for detecting neutrinos, neutrons, photons, and potentially dark matter. The University of Michigan is developing a detector with liquid argon to produce scintillation light and ionization electrons. Our data collection method will allow high-resolution energy measurement and spatial reconstruction of detected particles by using multi-pixel silicon photomultipliers (SiPM) and a cylindrical time projection chamber (TPC) with a multi-wire endplate. We have already designed a liquid argon condenser and purification unit surrounded by an insulating vacuum, constructed circuitry for temperature and pressure sensors, and created software to obtain high-accuracy sensor readouts. The status of detector development will be presented. Funded through the Michigan Memorial Phoenix Project.

  8. Small-Molecule Inhibitor Leads of Ribosome-Inactivating Proteins Developed Using the Doorstop Approach

    PubMed Central

    Pang, Yuan-Ping; Park, Jewn Giew; Wang, Shaohua; Vummenthala, Anuradha; Mishra, Rajesh K.; McLaughlin, John E.; Di, Rong; Kahn, Jennifer Nielsen; Tumer, Nilgun E.; Janosi, Laszlo; Davis, Jon; Millard, Charles B.

    2011-01-01

    Ribosome-inactivating proteins (RIPs) are toxic because they bind to 28S rRNA and depurinate a specific adenine residue from the α-sarcin/ricin loop (SRL), thereby inhibiting protein synthesis. Shiga-like toxins (Stx1 and Stx2), produced by Escherichia coli, are RIPs that cause outbreaks of foodborne diseases with significant morbidity and mortality. Ricin, produced by the castor bean plant, is another RIP lethal to mammals. Currently, no US Food and Drug Administration-approved vaccines nor therapeutics exist to protect against ricin, Shiga-like toxins, or other RIPs. Development of effective small-molecule RIP inhibitors as therapeutics is challenging because strong electrostatic interactions at the RIP•SRL interface make drug-like molecules ineffective in competing with the rRNA for binding to RIPs. Herein, we report small molecules that show up to 20% cell protection against ricin or Stx2 at a drug concentration of 300 nM. These molecules were discovered using the doorstop approach, a new approach to protein•polynucleotide inhibitors that identifies small molecules as doorstops to prevent an active-site residue of an RIP (e.g., Tyr80 of ricin or Tyr77 of Stx2) from adopting an active conformation thereby blocking the function of the protein rather than contenders in the competition for binding to the RIP. This work offers promising leads for developing RIP therapeutics. The results suggest that the doorstop approach might also be applicable in the development of other protein•polynucleotide inhibitors as antiviral agents such as inhibitors of the Z-DNA binding proteins in poxviruses. This work also calls for careful chemical and biological characterization of drug leads obtained from chemical screens to avoid the identification of irrelevant chemical structures and to avoid the interference caused by direct interactions between the chemicals being screened and the luciferase reporter used in screening assays. PMID:21455295

  9. From Communicate to Educate - how a project structure and philosophy leads to engagement that influences organisational behaviours and decision making

    NASA Astrophysics Data System (ADS)

    Gaynor, Suzie; Corney, Stuart; Ling, Fiona; Bindoff, Nathan

    2010-05-01

    structured our formal and informal engagement activities to encourage active involvement, thus learning. We are providing early preliminary results and tailored products for our end-users to ‘trial' and learn along the way. As we have struggled with difficult climate change science decisions, we have asked our stakeholders to be involved and develop the solution with us. We have actively avoided the traditional information transfer approach of one-size fits all with regards to activities and products. We sit with our stakeholders, listen to what their information needs are, understand how their organisation works and functions, and involve them. Our stakeholders inform, guide and drive our research and the engagement activities. We go to their board rooms, their offices, their paddocks. Our engagement activities are as much about us learning from them, as it is us ‘teaching' them about climate science. It has been highly effective to start an educational journey with them from the beginning of our research, rather than deliver challenging concepts and conclusions at the end. The key element of our communication and education strategy has been continual engagement with relevant state and national government departments, and other major stakeholders. This ongoing engagement introduces critical and often hard-to-understand climate science concepts to stakeholders early in the project, thus allowing such concepts to become familiar over the length of the project. This strategy ensures that in the conclusive reporting stage, our stakeholders are well-versed in the language and concepts necessary to engage with the conclusions, and consequently change behaviours. Our stakeholders have become advocates for our research and climate change science. Early engagement has encouraged a sense of ownership and familiarity of the climate science. This is crucial in the climate change space, where results can be controversial, difficult to appreciate and often ignored. What has been

  10. From Communicate to Educate - how a project structure and philosophy leads to engagement that influences organisational behaviours and decision making

    NASA Astrophysics Data System (ADS)

    Gaynor, Suzie; Corney, Stuart; Ling, Fiona; Bindoff, Nathan

    2010-05-01

    structured our formal and informal engagement activities to encourage active involvement, thus learning. We are providing early preliminary results and tailored products for our end-users to ‘trial' and learn along the way. As we have struggled with difficult climate change science decisions, we have asked our stakeholders to be involved and develop the solution with us. We have actively avoided the traditional information transfer approach of one-size fits all with regards to activities and products. We sit with our stakeholders, listen to what their information needs are, understand how their organisation works and functions, and involve them. Our stakeholders inform, guide and drive our research and the engagement activities. We go to their board rooms, their offices, their paddocks. Our engagement activities are as much about us learning from them, as it is us ‘teaching' them about climate science. It has been highly effective to start an educational journey with them from the beginning of our research, rather than deliver challenging concepts and conclusions at the end. The key element of our communication and education strategy has been continual engagement with relevant state and national government departments, and other major stakeholders. This ongoing engagement introduces critical and often hard-to-understand climate science concepts to stakeholders early in the project, thus allowing such concepts to become familiar over the length of the project. This strategy ensures that in the conclusive reporting stage, our stakeholders are well-versed in the language and concepts necessary to engage with the conclusions, and consequently change behaviours. Our stakeholders have become advocates for our research and climate change science. Early engagement has encouraged a sense of ownership and familiarity of the climate science. This is crucial in the climate change space, where results can be controversial, difficult to appreciate and often ignored. What has been

  11. New developments on valve-regulated lead-acid batteries for advanced automotive electrical systems

    NASA Astrophysics Data System (ADS)

    Soria, M. L.; Hernández, J. C.; Valenciano, J.; Sánchez, A.; Trinidad, F.

    The development of novel electrical systems for low emission vehicles demands batteries with specific cycling performance, especially under partial state of charge (PSOC) conditions. Moreover, according to the powertrain design, battery high power capability is demanded or this function can be assumed by a supercapacitor or a flywheel. This paper deals with the development of AGM and gel valve-regulated lead-acid batteries for advanced automotive applications. AGM VRLA battery development was based on previous work for short autonomy high power UPS applications and on active material formulations with specific additives to improve battery life under high rate partial state of charge cycling conditions. The 18 Ah batteries showed excellent high rate capability (9 kW 10 s discharge peaks and 4 kW 5 s regenerative charge acceptance at 60% state of charge) and 110,000 power assist microcycles at 60% SOC and 2.5% DOD were fulfilled. Moreover, as preliminary work in the development of a cost-effective and reliable gel battery to be used in combination of a supercapacitor in a 42 V mild-hybrid powertrain, VRLA batteries with conventional gel formulations have been tested according to novel automotive cycling profiles, mainly moderate cycling under partial state of charge conditions and simulating load management in a stop and start working profile.

  12. Energy Efficient Community Development in California: Chula Vista Research Project

    SciTech Connect

    Gas Technology Institute

    2009-03-31

    In 2007, the U.S. Department of Energy joined the California Energy Commission in funding a project to begin to examine the technical, economic and institutional (policy and regulatory) aspects of energy-efficient community development. That research project was known as the Chula Vista Research Project for the host California community that co-sponsored the initiative. The researches proved that the strategic integration of the selected and economically viable buildings energy efficiency (EE) measures, photovoltaics (PV), distributed generation (DG), and district cooling can produce significant reductions in aggregate energy consumption, peak demand and emissions, compared to the developer/builder's proposed baseline approach. However, the central power plant emission reductions achieved through use of the EE-DG option would increase local air emissions. The electric and natural gas utility infrastructure impacts associated with the use of the EE and EE-PV options were deemed relatively insignificant while use of the EE-DG option would result in a significant reduction of necessary electric distribution facilities to serve a large-scale development project. The results of the Chula Vista project are detailed in three separate documents: (1) Energy-Efficient Community Development in California; Chula Vista Research Project report contains a detailed description of the research effort and findings. This includes the methodologies, and tools used and the analysis of the efficiency, economic and emissions impacts of alternative energy technology and community design options for two development sites. Research topics covered included: (a) Energy supply, demand, and control technologies and related strategies for structures; (b) Application of locally available renewable energy resources including solar thermal and PV technology and on-site power generation with heat recovery; (c) Integration of local energy resources into district energy systems and existing energy

  13. ODIP - Ocean Data Interoperability Platform - developing interoperabilty Pilot project 1

    NASA Astrophysics Data System (ADS)

    Schaap, Dick M. A.; Glaves, Helen

    2014-05-01

    Europe, the USA, Australia and IOC/IODE are making significant progress in facilitating the discovery and access of marine data through the development, implementation, population and operation of national, regional or international distributed ocean and marine observing and data management infrastructures such as SeaDataNet, Geo-Seas, IOOS, the Australian Ocean Portal and the IODE Ocean Data Portal. All of these developments are resulting in the development and implementation of standards for the formats of metadata, data, data products, quality control methods and flags, common vocabularies. They are also providing services for data discovery, viewing and downloading, and software tools for editing, conversions, communication, analysis and presentation, all of which are increasingly being adopted and used by their national and regional marine communities. There is also a general trend towards the use of the basic ISO and OGC standards, however these allow the use of different profiles and vocabularies. As a result there are differences in the standards used in the different regions which hinder their direct exchange and use at an international and global scale, and as a result act as a barrier to the realisation of global portals such as the IODE Ocean Data Portal and GEOSS. The Ocean Data Interoperability Platform (ODIP) project is supported by the EU FP7 Research Infrastructures programme, National Science Foundation (USA) and Australian government and has started 1st October 2012. ODIP includes all the major organisations engaged in ocean data management in EU, US, and Australia. ODIP is also supported by the IOC -IODE, closely linking this activity with its Ocean Data Portal (ODP) and Ocean Data Standards (ODS) projects. The ODIP platform aims to ease interoperability between the regional marine data management infrastructures. Therefore it facilitates an organised dialogue between the key infrastructure representatives by means of publishing best practice

  14. Traveling Road Show or Effective Professional Development? A Professional Development Science Project on Wheels.

    ERIC Educational Resources Information Center

    Anfara, Vincent A., Jr.; Danin, Susan T.; Melvin, Kathy; Dillner, Harry

    This study evaluated a science professional development initiative developed by the Delaware State Department of Education, examining the nature of professional development activities, their effect on science classrooms, and their impact on teachers, students, and schools. The Science Van Project integrated technology and inquiry into Delaware's…

  15. Development of Distributed Research Center for monitoring and projecting regional climatic and environmental changes: first results

    NASA Astrophysics Data System (ADS)

    Gordov, Evgeny; Shiklomanov, Alexander; Okladinikov, Igor; Prusevich, Alex; Titov, Alexander

    2016-04-01

    Description and first results of the cooperative project "Development of Distributed Research Center for monitoring and projecting of regional climatic and environmental changes" recently started by SCERT IMCES and ESRC UNH are reported. The project is aimed at development of hardware and software platform prototype of Distributed Research Center (DRC) for monitoring and projecting regional climatic and environmental changes over the areas of mutual interest and demonstration the benefits of such collaboration that complements skills and regional knowledge across the northern extratropics. In the framework of the project, innovative approaches of "cloud" processing and analysis of large geospatial datasets will be developed on the technical platforms of two U.S. and Russian leading institutions involved in research of climate change and its consequences. Anticipated results will create a pathway for development and deployment of thematic international virtual research centers focused on interdisciplinary environmental studies by international research teams. DRC under development will comprise best features and functionality of earlier developed by the cooperating teams' information-computational systems RIMS (http://rims.unh.edu) and CLIMATE(http://climate.scert.ru/), which are widely used in Northern Eurasia environment studies. The project includes several major directions of research (Tasks) listed below. 1. Development of architecture and defining major hardware and software components of DRC for monitoring and projecting of regional environmental changes. 2. Development of an information database and computing software suite for distributed processing and analysis of large geospatial data hosted at ESRC and IMCES SB RAS. 3. Development of geoportal, thematic web client and web services providing international research teams with an access to "cloud" computing resources at DRC; two options will be executed: access through a basic graphical web browser and

  16. The `advanced DIR-MCFC development' project, an overview

    NASA Astrophysics Data System (ADS)

    Kortbeek, P. J.; Ottervanger, R.

    An overview is given of the approach and mid-term status of the joint European `Advanced DIR-MCFC Development' project, in which BCN, BG plc, GDF, ECN, Stork, Schelde and Sydkraft co-operate. Hospitals are identified as an attractive initial market for cogeneration direct internal reforming-molten carbonate fuel cell (DIR-MCFC) systems in the size of 400 kWe. Innovative system and stack design concepts are being developed for this application. The `SMARTER' system, based on DIR stacks, combines high electric efficiency and a wide operational window with optimal system simplicity and low cost.

  17. Programmable SAW development :Sandia/NASA project final report.

    SciTech Connect

    Brocato, Robert Wesley

    2004-10-01

    This report describes a project to develop both fixed and programmable surface acoustic wave (SAW) correlators for use in a low power space communication network. This work was funded by NASA at Sandia National Laboratories for fiscal years 2004, 2003, and the final part of 2002. The role of Sandia was to develop the SAW correlator component, although additional work pertaining to use of the component in a system and system optimization was also done at Sandia. The potential of SAW correlator-based communication systems, the design and fabrication of SAW correlators, and general system utilization of those correlators are discussed here.

  18. Development of the NASA Digital Astronaut Project Muscle Model

    NASA Technical Reports Server (NTRS)

    Lewandowski, Beth E.; Pennline, James A.; Thompson, W. K.; Humphreys, B. T.; Ryder, J. W.; Ploutz-Snyder, L. L.; Mulugeta, L.

    2015-01-01

    This abstract describes development work performed on the NASA Digital Astronaut Project Muscle Model. Muscle atrophy is a known physiological response to exposure to a low gravity environment. The DAP muscle model computationally predicts the change in muscle structure and function vs. time in a reduced gravity environment. The spaceflight muscle model can then be used in biomechanical models of exercise countermeasures and spaceflight tasks to: 1) develop site specific bone loading input to the DAP bone adaptation model over the course of a mission; 2) predict astronaut performance of spaceflight tasks; 3) inform effectiveness of new exercise countermeasures concepts.

  19. Research and development of advanced lead-acid batteries for electric vehicle propulsion

    NASA Astrophysics Data System (ADS)

    Andrew, M. G.; Bowman, D. E.

    1987-04-01

    The purpose was to develop an advanced lead-acid battery based on the concept of forced flow of electrolyte through porous electrodes for enhanced battery performance. The objectives were: specific energy of 42 Wh/kg, energy density of 70 Wh/l, and cycle life of 100 cycles. Accomplishments were: 35 flow-through cells with reduced construction time, higher fiber content in the positive active materials (PAM) with increased strength by a factor of 3, high-density PAM for increased life without utilization losses, confirmation of solid-state relaxation theory, methods for measuring permeability, 31 cycles achieved in C-450, oxygen recombination in many test cells, electrolyte reservoir can be below the top of the cells, and completed designs for positive and negative flow-through grids and for the injection molds to produce the grid/plastic laminates.

  20. Development and clinical study of mobile 12-lead electrocardiography based on cloud computing for cardiac emergency.

    PubMed

    Fujita, Hideo; Uchimura, Yuji; Waki, Kayo; Omae, Koji; Takeuchi, Ichiro; Ohe, Kazuhiko

    2013-01-01

    To improve emergency services for accurate diagnosis of cardiac emergency, we developed a low-cost new mobile electrocardiography system "Cloud Cardiology®" based upon cloud computing for prehospital diagnosis. This comprises a compact 12-lead ECG unit equipped with Bluetooth and Android Smartphone with an application for transmission. Cloud server enables us to share ECG simultaneously inside and outside the hospital. We evaluated the clinical effectiveness by conducting a clinical trial with historical comparison to evaluate this system in a rapid response car in the real emergency service settings. We found that this system has an ability to shorten the onset to balloon time of patients with acute myocardial infarction, resulting in better clinical outcome. Here we propose that cloud-computing based simultaneous data sharing could be powerful solution for emergency service for cardiology, along with its significant clinical outcome. PMID:23920851

  1. Development of lead-free copper alloy-graphite casting. Annual report, January--December 1994

    SciTech Connect

    Rohatgi, P.K.

    1996-02-01

    Water model experiments were conducted to develop a two-stage stirring method for obtaining higher yields and a more uniform distribution of particles in copper alloys. This was followed by several melts for synthesis of copper-graphite alloys in which T1 was used as a wetting agent to improve the wettability of graphite in the copper melt. In the first stage, a vortex method was employed to facilitate the suction of graphite particles into the copper melt. In the second stage, the specially designed stirrer was used to avoid the formation of vortex in melt. The two stage stirring was found to considerably improve the recovery of graphite, over those obtained with the prior practice of single stage stirring. In addition, graphite recoveries increased with increasing Ti content. Flotation, fluidity, and directional solidification experiments were also conducted on copper-graphite alloys synthesized in this study. Tests showed that the spiral fluidity length of the yellow brass alloy increased with temperature and decreased with graphite. The fluidity of copper-graphite alloys investigated to date remained adequate to make a variety of castings. The observations of microstructure of directional solidification and flotation showed that in certain castings the graphite particles were agglomerated and they float to the upper part of the castings where they reduced the size of grains. However, in the agglomerated form, the graphite particles improved the machinability of copper alloys in a manner similar to lead. The result of the first years work provide an improved method of synthesis of lead free copper graphite alloys with improved machinability and adequate fluidity. Future work will continue to further improve the distribution of graphite particles in casting while retaining adequate fluidity and improved machinability. Techniques like centrifugal casting will be developed to concentrate graphite in regions where it is required for machinability in bearings.

  2. U.S. Department of Energy Wind Turbine Development Projects

    SciTech Connect

    Migliore, P. G.; Calvert, S. D.

    1999-04-26

    This paper provides an overview of wind-turbine development activities in the Unites States and relates those activities to market conditions and projections. Several factors are responsible for a surge in wind energy development in the United States, including a federal production tax credit, ''green power'' marketing, and improving cost and reliability. More development is likely, as approximately 363 GW of new capacity will be needed by 2020 to meet growing demand and replace retiring units. The U.S. Department of Energy (DOE) is helping two companies develop next-generation turbines intended to generate electricity for $0.025/kWh or less. We expect to achieve this objective through a combination of improved engineering methods and configuration advancements. This should ensure that wind power will compete effectively against advanced combined-cycle plants having projected generating costs of $0.031/kWh in 2005. To address the market for small and intermediate-size wind turbines, DOE is assisting five companies in their attempts to develop new turbines having low capital cost and high reliability. Additional information regarding U.S. wind energy programs is available on the internet site www.nrel.gov/wind/. E-mail addresses for the turbine manufacturers are found in the Acknowledgements.

  3. The Thirty-Meter Telescope project design and development phase

    NASA Astrophysics Data System (ADS)

    Stepp, Larry M.; Strom, Stephen E.

    2004-07-01

    The U.S. National Observatories have responded to the call of the astronomy decadal survey committee to develop a Giant Segmented Mirror Telescope by forming the AURA New Initiatives Office. Drawing on the engineering and scientific staffs of the National Optical Astronomy Observatory and the Gemini Observatory, NIO has for the past 30 months carried out studies aimed at: understanding the key science drivers for a thirty-meter telescope; developing a feasible point design that is responsive to the science goals; and identifying key technical issues that must be solved in order to successfully build such a telescope. In parallel, NIO has followed the charge of the decadal survey to identify potential private and international partners to fulfill the committee vision of a public-private partnership to build and operate this facility. NIO has now joined with two other groups -- the CELT Development Corporation (a partnership between the University of California and the California Institute of Technology) and the Association of Canadian Unviersities for Research In Astronomy (ACURA) -- to initiate the next step, the design & development (D & D) phase of a joint project that is being called the Thirty-Meter Telescope (TMT) Project. This paper reviews the plans for the TMT D & D phase, including the organizational structure, science requirements, and plans for conceptual design studies, technology development, and site selection.

  4. A role for NGOs in international renewable energy project development

    SciTech Connect

    Bartholf, T.R.

    1997-12-01

    An NGO is an international term for non-government organizations, often it is used in connection with non-profit, community-based and/or voluntary business activities. To be successful in supporting energy projects, these organizations generally exhibit certain characteristics: they are familiar with the end-use requirements; they are typically neutral to the technology; they emphasize training; they do not carry a large bureacratic structure, at home or in the field; they typically can adapt to do numerous functions; they can often attract other support. The author discusses several examples of such organizations who have been highly successful. The author sees a continuing role for such groups in developing renewable energy sources in the rural setting to include: continued development of new activity in rural areas; development of institutional framework for future market activity; an increased role in managing international development activities; more direct involvement with for-profit technical and financial organizations.

  5. SIMRAND I- SIMULATION OF RESEARCH AND DEVELOPMENT PROJECTS

    NASA Technical Reports Server (NTRS)

    Miles, R. F.

    1994-01-01

    The Simulation of Research and Development Projects program (SIMRAND) aids in the optimal allocation of R&D resources needed to achieve project goals. SIMRAND models the system subsets or project tasks as various network paths to a final goal. Each path is described in terms of task variables such as cost per hour, cost per unit, availability of resources, etc. Uncertainty is incorporated by treating task variables as probabilistic random variables. SIMRAND calculates the measure of preference for each alternative network. The networks yielding the highest utility function (or certainty equivalence) are then ranked as the optimal network paths. SIMRAND has been used in several economic potential studies at NASA's Jet Propulsion Laboratory involving solar dish power systems and photovoltaic array construction. However, any project having tasks which can be reduced to equations and related by measures of preference can be modeled. SIMRAND analysis consists of three phases: reduction, simulation, and evaluation. In the reduction phase, analytical techniques from probability theory and simulation techniques are used to reduce the complexity of the alternative networks. In the simulation phase, a Monte Carlo simulation is used to derive statistics on the variables of interest for each alternative network path. In the evaluation phase, the simulation statistics are compared and the networks are ranked in preference by a selected decision rule. The user must supply project subsystems in terms of equations based on variables (for example, parallel and series assembly line tasks in terms of number of items, cost factors, time limits, etc). The associated cumulative distribution functions and utility functions for each variable must also be provided (allowable upper and lower limits, group decision factors, etc). SIMRAND is written in Microsoft FORTRAN 77 for batch execution and has been implemented on an IBM PC series computer operating under DOS.

  6. Astronomy and development: a multidisciplinary project in the Mexican countryside

    NASA Astrophysics Data System (ADS)

    Bravo Alfaro, Hector; Caretta, César; Brito, Elcia M. S.

    2015-08-01

    We outline a long term project focused on children and young students living in rural places of the Mexican State of Guanajuato. This multidisciplinary project includes astronomers, environment engineers, biologists and sociologists of Universidad de Guanajuato. One part of the activities are done in situ, at the villages, and other is currently proposed to be held at the Public Astronomical Observatory of Universidad de Guanajuato. Organizing the trips and the activities for scholar groups at the observatory (where telescopes, computers and microscopes are available) would fit very well within several of the IAU-OAD strategies. We expect that, attending the FM20 of the IAU and presenting our results there will help us to develop regionalcollaborations and showing the many opportunities for new possible volunteers.

  7. In-house developed methodologies and tools for decommissioning projects

    SciTech Connect

    Detilleux, Michel; Centner, Baudouin

    2007-07-01

    The paper describes different methodologies and tools developed in-house by Tractebel Engineering to facilitate the engineering works to be carried out especially in the frame of decommissioning projects. Three examples of tools with their corresponding results are presented: - The LLWAA-DECOM code, a software developed for the radiological characterization of contaminated systems and equipment. The code constitutes a specific module of more general software that was originally developed to characterize radioactive waste streams in order to be able to declare the radiological inventory of critical nuclides, in particular difficult-to-measure radionuclides, to the Authorities. In the case of LLWAA-DECOM, deposited activities inside contaminated equipment (piping, tanks, heat exchangers...) and scaling factors between nuclides, at any given time of the decommissioning time schedule, are calculated on the basis of physical characteristics of the systems and of operational parameters of the nuclear power plant. This methodology was applied to assess decommissioning costs of Belgian NPPs, to characterize the primary system of Trino NPP in Italy, to characterize the equipment of miscellaneous circuits of Ignalina NPP and of Kozloduy unit 1 and, to calculate remaining dose rates around equipment in the frame of the preparation of decommissioning activities; - The VISIMODELLER tool, a user friendly CAD interface developed to ease the introduction of lay-out areas in a software named VISIPLAN. VISIPLAN is a 3D dose rate assessment tool for ALARA work planning, developed by the Belgian Nuclear Research Centre SCK.CEN. Both softwares were used for projects such as the steam generators replacements in Belgian NPPs or the preparation of the decommissioning of units 1 and 2 of Kozloduy NPP; - The DBS software, a software developed to manage the different kinds of activities that are part of the general time schedule of a decommissioning project. For each activity, when relevant

  8. Leading trends in environmental regulation that affect energy development. Final report

    SciTech Connect

    Steele, R V; Attaway, L D; Christerson, J A; Kikel, D A; Kuebler, J D; Lupatkin, B M; Liu, C S; Meyer, R; Peyton, T O; Sussin, M H

    1980-01-01

    Major environmental issues that are likely to affect the implementation of energy technologies between now and the year 2000 are identified and assessed. The energy technologies specifically addressed are: oil recovery and processing; gas recovery and processing; coal liquefaction; coal gasification (surface); in situ coal gasification; direct coal combustion; advanced power systems; magnetohydrodynamics; surface oil shale retorting; true and modified in situ oil shale retorting; geothermal energy; biomass energy conversion; and nuclear power (fission). Environmental analyses of these technologies included, in addition to the main processing steps, the complete fuel cycle from resource extraction to end use. A comprehensive survey of the environmental community (including environmental groups, researchers, and regulatory agencies) was carried out in parallel with an analysis of the technologies to identify important future environmental issues. Each of the final 20 issues selected by the project staff has the following common attributes: consensus of the environmental community that the issue is important; it is a likely candidate for future regulatory action; it deals with a major environmental aspect of energy development. The analyses of the 20 major issues address their environmental problem areas, current regulatory status, and the impact of future regulations. These analyses are followed by a quantitative assessment of the impact on energy costs and nationwide pollutant emissions of possible future regulations. This is accomplished by employing the Strategic Environmental Assessment System (SEAS) for a subset of the 20 major issues. The report concludes with a more general discussion of the impact of environmental regulatory action on energy development.

  9. Global Mapping Project - Applications and Development of Version 2 Dataset

    NASA Astrophysics Data System (ADS)

    Ubukawa, T.; Nakamura, T.; Otsuka, T.; Iimura, T.; Kishimoto, N.; Nakaminami, K.; Motojima, Y.; Suga, M.; Yatabe, Y.; Koarai, M.; Okatani, T.

    2012-07-01

    The Global Mapping Project aims to develop basic geospatial information of the whole land area of the globe, named Global Map, through the cooperation of National Mapping Organizations (NMOs) around the world. The Global Map data can be a base of global geospatial infrastructure and is composed of eight layers: Boundaries, Drainage, Transportation, Population Centers, Elevation, Land Use, Land Cover and Vegetation. The Global Map Version 1 was released in 2008, and the Version 2 will be released in 2013 as the data are to be updated every five years. In 2009, the International Steering Committee for Global Mapping (ISCGM) adopted new Specifications to develop the Global Map Version 2 with a change of its format so that it is compatible with the international standards, namely ISO 19136 and ISO 19115. With the support of the secretariat of ISCGM, the project participating countries are accelerating their data development toward the completion of the global coverage in 2013, while some countries have already released their Global Map version 2 datasets since 2010. Global Map data are available from the Internet free of charge for non-commercial purposes, which can be used to predict, assess, prepare for and cope with global issues by combining with other spatial data. There are a lot of Global Map applications in various fields, and further utilization of Global Map is expected. This paper summarises the activities toward the development of the Global Map Version 2 as well as some examples of the Global Map applications in various fields.

  10. Development and Implementation of NASA's Lead Center for Rocket Propulsion Testing

    NASA Technical Reports Server (NTRS)

    Dawson, Michael C.

    2001-01-01

    With the new millennium, NASA's John C. Stennis Space Center (SSC) continues to develop and refine its role as rocket test service provider for NASA and the Nation. As Lead Center for Rocket Propulsion Testing (LCRPT), significant progress has been made under SSC's leadership to consolidate and streamline NASA's rocket test infrastructure and make this vital capability truly world class. NASA's Rocket Propulsion Test (RPT) capability consists of 32 test positions with a replacement value in excess of $2B. It is dispersed at Marshall Space Flight Center (MSFC), Johnson Space Center (JSC)-White Sands Test Facility (WSTF), Glenn Research Center (GRC)-Plum Brook (PB), and SSC and is sized appropriately to minimize duplication and infrastructure costs. The LCRPT also provides a single integrated point of entry into NASA's rocket test services. The RPT capability is managed through the Rocket Propulsion Test Management Board (RPTMB), chaired by SSC with representatives from each center identified above. The Board is highly active, meeting weekly, and is key to providing responsive test services for ongoing operational and developmental NASA and commercial programs including Shuttle, Evolved Expendable Launch Vehicle, and 2nd and 3rd Generation Reusable Launch Vehicles. The relationship between SSC, the test provider, and the hardware developers, like MSFC, is critical to the implementation of the LCRPT. Much effort has been expended to develop and refine these relationships with SSC customers. These efforts have met with success and will continue to be a high priority to SSC for the future. To data in the exercise of its role, the LCRPT has made 22 test assignments and saved or avoided approximately $51M. The LCRPT directly manages approximately $30M annually in test infrastructure costs including facility maintenance and upgrades, direct test support, and test technology development. This annual budges supports rocket propulsion test programs which have an annual budget

  11. ESTE Project Brief: Environmental and Sustainable Technology Evaluations (ESTE): Verification of Qualitative Spot Test Kits for Lead in Paint

    EPA Science Inventory

    On April 22, 2008, EPA issued the final Lead; Renovation, Repair, and Painting (RRP) Program Rule. The rule addresses lead-based paint hazards created by renovation, repair, and painting activities that disturb lead-based paint in target housing and child-occupied facilities. Und...

  12. Development of extremely ductile lead-free Sn-Al solders for futuristic electronic packaging applications

    NASA Astrophysics Data System (ADS)

    Alam, Md Ershadul; Gupta, Manoj

    2014-03-01

    In the present study, new lead-free Sn-Al solders are developed incorporating varying amount of Al (0.4 and 0.6% by weight) into pure Sn using disintegrated melt deposition technique. Solder samples were then subsequently extruded at room temperature and characterized. Microstructural characterization studies revealed equiaxed grain morphology, minimal porosity, reasonably uniform distribution of Al particles and good Sn-Al interfacial integrity. Melting temperature of Sn-0.6Al (228°C) was found to be close to the eutectic Sn-0.7Cu (227°C) solders. Microhardness was increased with increasing amount of Al in pure Sn. Room temperature tensile test results revealed that newly developed Sn-0.6Al solders exhibited significant improvement in 0.2% yield strength (˜67%), ultimate tensile strength (˜18%) and ductility (˜123%) when compared to commercial Sn-0.7Cu solder. Ductility was improved about 222%, 263% and 81% when compared to commercially available Sn-3.5Ag-0.7Cu, Sn-3.5Ag and Sn-37Pb solders, respectively without compromising strength.

  13. Development of lead-free copper alloy-graphite castings. Technical report, January 1994--December 1994

    SciTech Connect

    Rohatgi, P.K.

    1995-07-01

    Water model experiments were conducted to develop a two-stage stirring method for obtaining higher yields and a more uniform distribution of graphite particles in copper alloys. This was followed by several melts for synthesis of copper-graphite alloys in which Ti was used as a wetting agent to improve the wettability of graphite in the copper melt. In the first stage, a vortex method was employed to facilitate the addition of graphite particles into the copper melt. In the second stage, a specially designed stirrer was used for uniform particle distribution while avoiding the formation of vortex in the melt. The two-stage stirring was found to considerably improve the recovery of graphite, over those obtained with the prior practice of single-stage stirring and resulting in a more uniform particle distribution. In addition, graphite recoveries increased with increasing Ti content in the range investigated. Floatation, fluidity, and directional solidification experiments were also conducted on copper-graphite alloys synthesized in this study. Fluidity tests showed that the spiral fluidity length of the yellow brass alloy increased with temperature and decreased with graphite. The fluidity of copper-graphite alloys investigated to-date remained adequate to make a variety of castings. The observations of casting microstructure under directional solidification and floatation showed that in certain castings the graphite particles remained agglomerated, and they readily floated to the upper part of the castings where they reduced the size of gains. However, even in the agglomerated form, the graphite particles improved the machinability of copper alloys in a manner similar to lead. The results of the first year work provide an improved method of synthesis of lead free copper graphite alloys with improved machinability and adequate fluidity.

  14. Geographic information system development in the CARETS project

    USGS Publications Warehouse

    Mitchell, William B.; Fegeas, Robin G.; Fitzpatrick, Katherine A.; Hallam, Cheryl A.

    1977-01-01

    Experience in the development of a geographic information system to support the CARETS project has confirmed the considerable advantages that may accrue by paralleling the system development with a rational and balanced system production effort which permits the integration of the education and training of users with interim deliverable products to them. Those advantages include support for a long-term staff plan that recognizes substantial staff changes through system development and implementation, a fiscal plan that provides continuity in resources necessary for total system development, and a feedback system which allows the user to communicate his experiences in using the system. Thus far balance between system development and system production has not been achieved because of continuing large-scale spatial data processing requirements coupled with strong and insistent demands from users for immediately deliverable products from the system. That imbalance has refocussed staffing and fiscal plans from long-term system development to short- and near-term production requirements, continuously extends total system development time, and increases the possibility that later system development may reduce the usefulness of current interim products.

  15. Physics Teachers' Professional Development in the Project "physics in Context"

    NASA Astrophysics Data System (ADS)

    Mikelskis-Seifert, Silke; Duit, Reinders

    2012-12-01

    Developing teachers' ways of thinking about "good" instruction as well as their views of the teaching and learning process is generally seen as essential for improving teaching behaviour and implementation of more efficient teaching and learning settings. Major deficiencies of German physics instruction as revealed by a nationwide video-study on the practice of physics instruction are addressed. Teachers participating in the project are made familiar with recent views of efficient instruction on the one hand and develop context-based instructional settings on the other. The evaluation resulted in partly encouraging findings. However, it also turned out that a number of teachers' ways of thinking about good instruction did only develop to a somewhat limited degree. The most impressive changes occurred for teachers who enjoyed the most intensive coaching.

  16. Physics Teachers' Professional Development in the Project "physics in Context"

    NASA Astrophysics Data System (ADS)

    Mikelskis-Seifert, Silke; Duit, Reinders

    2013-06-01

    Developing teachers' ways of thinking about "good" instruction as well as their views of the teaching and learning process is generally seen as essential for improving teaching behaviour and implementation of more efficient teaching and learning settings. Major deficiencies of German physics instruction as revealed by a nationwide video-study on the practice of physics instruction are addressed. Teachers participating in the project are made familiar with recent views of efficient instruction on the one hand and develop context-based instructional settings on the other. The evaluation resulted in partly encouraging findings. However, it also turned out that a number of teachers' ways of thinking about good instruction did only develop to a somewhat limited degree. The most impressive changes occurred for teachers who enjoyed the most intensive coaching.

  17. Interim status report on lead-cooled fast reactor (LFR) research and development.

    SciTech Connect

    Tzanos, C. P.; Sienicki, J. J.; Moisseytsev, A.; Smith, C. F.; de Caro, M.; Halsey, W. G.; Li, N.; Hosemann, P.; Zhang, J.; Bolind, A.; LLNL; LANL; Univ. of Illinois

    2008-03-31

    This report discusses the status of Lead-Cooled Fast Reactor (LFR) research and development carried out during the first half of FY 2008 under the U.S. Department of Energy Generation IV Nuclear Energy Systems Initiative. Lead-Cooled Fast Reactor research and development has recently been transferred from Generation IV to the Reactor Campaign of the Global Nuclear Energy Partnership (GNEP). Another status report shall be issued at the end of FY 2008 covering all of the LFR activities carried out in FY 2008 for both Generation IV and GNEP. The focus of research and development in FY 2008 is an initial investigation of a concept for a LFR Advanced Recycling Reactor (ARR) Technology Pilot Plant (TPP)/demonstration test reactor (demo) incorporating features and operating conditions of the European Lead-cooled SYstem (ELSY) {approx} 600 MWe lead (Pb)-cooled LFR preconceptual design for the transmutation of waste and central station power generation, and which would enable irradiation testing of advanced fuels and structural materials. Initial scoping core concept development analyses have been carried out for a 100 MWt core composed of sixteen open-lattice 20 by 20 fuel assemblies largely similar to those of the ELSY preconceptual fuel assembly design incorporating fuel pins with mixed oxide (MOX) fuel, central control rods in each fuel assembly, and cooled with Pb coolant. For a cycle length of three years, the core is calculated to have a conversion ratio of 0.79, an average discharge burnup of 108 MWd/kg of heavy metal, and a burnup reactivity swing of about 13 dollars. With a control rod in each fuel assembly, the reactivity worth of an individual rod would need to be significantly greater than one dollar which is undesirable for postulated rod withdrawal reactivity insertion events. A peak neutron fast flux of 2.0 x 10{sup 15} (n/cm{sup 2}-s) is calculated. For comparison, the 400 MWt Fast Flux Test Facility (FFTF) achieved a peak neutron fast flux of 7.2 x 10{sup

  18. New developments in separators for valve-regulated lead-acid batteries

    NASA Astrophysics Data System (ADS)

    Böhnstedt, W.

    In valve-regulated lead-acid (VRLA) batteries the electrolyte solution has to be immobilized to ensure tiny channels left open for the transfer of oxygen from the positive to the negative electrode. So far microfibre glassmats have predominantly been used, which based on their high porosity and good wettability of the glass fibres are able to retain durably large electrolyte volumes. The tensile strength of such microfibre glassmats remains unsatisfactory. Developments to produce absorbing mats from organic fibres have recently succeeded due to advanced developments in polymers and in fibre production processes as well as in achieving permanent hydrophilisation. Such polypropylene-microfibremats have excellent tensile and puncture strength and—as pockets—can be well integrated into highly automated assembly processes. Test data for polypropylene-microfibremats are presented and compared to microfibre glassmats. Another approach to hamper the electrolyte in its free mobility is to gel it: batteries with gelled electrolyte have been shown to require conventional microporous separators—both for secure fixing of plate spacing as well as for preventing electronic shorts. Despite their complex filling process gel batteries are well accepted for cycling applications, when simultaneously freedom from maintenance is required. Due to the high power requirements for EV batteries there is a trend towards thinner plates and thinner separation; also substantial pressure on the positive electrode and thus also on the separator is desirable to improve the cycling life decisively. A new separator development is presented, which in spite of high porosity (>80%), suffers only little deformation even under very high pressure. It effectively prevents acid stratification, forms no filling profile and permits oxygen transfer.

  19. Chronic sleep restriction during development can lead to long-lasting behavioral effects.

    PubMed

    Saré, R Michelle; Levine, Merlin; Hildreth, Christine; Picchioni, Dante; Smith, Carolyn Beebe

    2016-03-01

    Sleep abnormalities are highly correlated with neurodevelopmental disorders, and the severity of behavioral abnormalities correlates with the presence of sleep abnormalities. Given the importance of sleep in developmental plasticity, we sought to determine the effects of chronic sleep-restriction during development on subsequent adult behavior. We sleep-restricted developing wild-type mice from P5-P42 for 3h per day by means of gentle handling (n=30) and compared behavioral outputs to controls that were handled 10 min daily (n=33). We assayed activity in the open field, social behavior, repetitive behavior, and anxiety immediately following sleep restriction and after four weeks of recovery. At six weeks of age, immediately following chronic sleep-restriction, mice were less active in an open field arena. Sociability was increased, but repetitive behaviors were unchanged in both males and females. After a 4-week period of recovery, some behavioral abnormalities persisted and some became apparent. Sleep-restricted mice had decreased activity in the beginning of an open field test. Female mice continued to have increased sociability and, in addition, increased preference for social novelty. In contrast, male mice demonstrated decreased sociability with medium effect sizes. Repetitive behavior was decreased in sleep-restricted female mice and increased in males. Measures of anxiety were not affected in the sleep-restricted mice. These results indicate that chronic sleep restriction during development can lead to long-lasting behavioral changes that are modulated by sex. Our study may have implications for a role of disrupted sleep in childhood on the unfolding of neurodevelopmental disorders. PMID:26712276

  20. Technology status and project development risks of advanced coal power generation technologies in APEC developing economies

    SciTech Connect

    Lusica, N.; Xie, T.; Lu, T.

    2008-10-15

    The report reviews the current status of IGCC and supercritical/ultrasupercritical pulverized-coal power plants and summarizes risks associated with project development, construction and operation. The report includes an economic analysis using three case studies of Chinese projects; a supercritical PC, an ultrasupercritical PC, and an IGCC plant. The analysis discusses barriers to clean coal technologies and ways to encourage their adoption for new power plants. 25 figs., 25 tabs.

  1. Update on the NASA GRC Stirling Technology Development Project

    NASA Technical Reports Server (NTRS)

    Thieme, Lanny G.; Schreiber, Jeffrey G.

    2000-01-01

    The Department of Energy, NASA Glenn Research Center (GRC), and Stirling Technology Company (STC) are developing a free-piston Stirling convertor for a Stirling radioisotope power system (SRPS) to provide spacecraft on-board electric power for NASA deep space missions. The SRPS has recently been identified for potential use on the Europa Orbiter and Solar Probe Space Science missions. Stirling is also now being considered for unmanned Mars rovers. NASA GRC is conducting an in-house project to assist in developing the Stirling convertor for readiness for space qualification and mission implementation. As part of this continuing effort, the Stirling convertor will be further characterized under launch environment random vibration testing, methods to reduce convertor electromagnetic interference (EMI) will be developed, and an independent performance verification will be completed. Convertor life assessment and permanent magnet aging characterization tasks are also underway. Substitute organic materials for the linear alternator and piston bearing coatings for use in a high radiation environment have been identified and have now been incorporated in Stirling convertors built by STC for GRC. Electromagnetic and thermal finite element analyses for the alternator are also being conducted. This paper discusses the recent results and status for this NASA GRC in-house project.

  2. The CERES S'COOL Project: Development and Operational Phases

    NASA Technical Reports Server (NTRS)

    Chambers, Lin H.; Young, David F.; Racel, Anne M.

    1998-01-01

    As part of NASA's Mission to Planet Earth, the first Clouds and the Earth's Radiant Energy System (CERES) instrument will be launched on the Tropical Rainfall Measuring Mission (TRMM) spacecraft from the Tanegashima launch site in Japan in November 1997. The instrument will measure the radiation budget incoming and outgoing radiant energy - of the Earth. The major feature of interest is clouds, which play a very strong role in regulating our climate. CERES will identify clear and cloudy regions and determine cloud physical and microphysical properties using imager data from a companion instrument. Validation efforts for the remote sensing algorithms will be intensive. As one component of the validation, the S'COOL (Students' Cloud Observations On-Line) project will involve school children around the globe in making ground truth measurements at the time of a CERES overpass. They will report cloud type, height, fraction, and opacity, as well as the local surface conditions. Their observations will be collected at the NASA Langley Distributed Active Archive Center (DAAC) and made available over the Internet for educational purposes as well as for use by the CERES Science Team in validation efforts. Pilot testing of the S'COOL project began in January 1997 with two local schools in Southeastern Virginia and one remote site in Montana. National testing in April 1997 involved 8 schools (grades 3 to high school) across the United States. Global testing will be carried out in October 1997. Details of the S'COOL project, which is mainly Internet-based, are being developed in each of these phases according to feedback received from participants. In 1998, when the CERES instrument is operational, a global observer network should be in place providing useful information to the scientists and learning opportunities to the students. Broad participation in the S'COOL project is planned, both to obtain data from a wide range of geographic areas, and to involve as many students as

  3. THE CAVES PROJECT — Collaborative Analysis Versioning Environment System, THE CODESH PROJECT — COllaborative DEvelopment SHell

    NASA Astrophysics Data System (ADS)

    Bourilkov, Dimitri

    A key feature of collaboration in science and software development is to have a log of what and how is being done - for private use and reuse and for sharing selected parts with collaborators, which most often today are distributed geographically on an ever larger scale. Even better if this log is automatic, created on the fly while a scientist or software developer is working in a habitual way, without the need for extra efforts. The CAVES and CODESH projects address this problem in a novel way, building on the concepts of virtual state and virtual transition to provide an automatic persistent logbook for sessions of data analysis or software development in a collaborating group. A repository of sessions can be configured dynamically to record and make available the knowledge accumulated in the course of a scientific or software endeavor. Access can be controlled to define logbooks of private sessions and sessions shared within or between collaborating groups.

  4. Preliminary Studies Leading Toward the Development of a LIDAR Bathymetry Mapping Instrument

    NASA Technical Reports Server (NTRS)

    Hill, John M.; Krenek, Brendan D.; Kunz, Terry D.; Krabill, William; Stetina, Fran

    1993-01-01

    The National Aeronautics and Space Administration (NASA) at Goddard Space Flight Center (GSFC) has developed a laser ranging device (LIDAR) which provides accurate and timely data of earth features. NASA/GSFC recently modified the sensor to include a scanning capability to produce LIDAR swaths. They have also integrated a Global Positioning System (GPS) and an Inertial Navigation System (INS) to accurately determine the absolute aircraft location and aircraft attitude (pitch, yaw, and roll), respectively. The sensor has been flown in research mode by NASA for many years. The LIDAR has been used in different configurations or modes to acquire such data as altimetry (topography), bathymetry (water depth), laser-induced fluorosensing (tracer dye movements, oil spills and oil thickness, chlorophyll and plant stress identification), forestry, and wetland discrimination studies. NASA and HARC are developing a commercial version of the instrument for topographic mapping applications. The next phase of the commercialization project will be to investigate other applications such as wetlands mapping and coastal bathymetry. In this paper we report on preliminary laboratory measurements to determine the feasibility of making accurate depth measurements in relatively shallow water (approximately 2 to 6 feet deep) using a LIDAR system. The LIDAR bathymetry measurements are relatively simple in theory. The water depth is determined by measuring the time interval between the water surface reflection and the bottom surface reflection signals. Depth is then calculated by dividing by the index of refraction of water. However, the measurements are somewhat complicated due to the convolution of the water surface return signal with the bottom surface return signal. Therefore in addition to the laboratory experiments, computer simulations of the data were made to show these convolution effects in the return pulse waveform due to: (1) water depth, and (2) changes in bottom surface

  5. MATERIALS AND COMPONENT DEVELOPMENT FOR ADVANCED TURBINE SYSTEMS PROJECT SUMMARY

    SciTech Connect

    Alvin, M A

    2010-06-18

    Future hydrogen-fired or oxy-fuel turbines will likely experience an enormous level of thermal and mechanical loading, as turbine inlet temperatures (TIT) approach 1425-1760C (2600-3200F) with pressures of 300-625 psig, respectively. Maintaining the structural integrity of future turbine components under these extreme conditions will require (1) durable thermal barrier coatings (TBCs), (2) high temperature creep resistant metal substrates, and (3) effective cooling techniques. While advances in substrate materials have been limited for the past decades, thermal protection of turbine airfoils in future hydrogen-fired and oxy-fuel turbines will rely primarily on collective advances in the TBCs and aerothermal cooling. To support the advanced turbine technology development, the Office of Research and Development (ORD) at National Energy Technology Laboratory (NETL) has continued its collaborative research efforts with the University of Pittsburgh and West Virginia University, while working in conjunction with commercial material and coating suppliers. This paper presents the technical accomplishments that were made during FY09 in the initial areas of advanced materials, aerothermal heat transfer and non-destructive evaluation techniques for use in advanced land-based turbine applications in the Materials and Component Development for Advanced Turbine Systems project, and introduces three new technology areas high temperature overlayer coating development, diffusion barrier coating development, and oxide dispersion strengthened (ODS) alloy development that are being conducted in this effort.

  6. Develop techniques for ion implantation of PLZT (lead-lanthanum-zirconate-titanate) for adaptive optics

    SciTech Connect

    Batishko, C.R.; Brimhall, J.L.; Pawlewicz, W.T.; Stahl, K.A.; Toburen, L.H.

    1987-07-01

    Research was conducted at Pacific Northwest Laboratory to develop high photosensitivity adaptive optical elements utilizing ion implanted lanthanum-doped lead-zirconate-titanate (PLZT). One centimeter square samples were prepared by implanting ferroelectric and anti-ferroelectric PLZT with a variety of species or combinations of species. These included Ne, O, Ni, Ne/Cr, Ne/Al, Ne/Ni, Ne/O, and Ni/O, at a variety of energies and fluences. An indium-tin oxide (ITO) electrode coating was designed to give a balance of high conductivity and optical transmission at near uv to near ir wavelengths. Samples were characterized for photosensitivity; implanted layer thickness, index of refraction, and density; electrode (ITO) conductivity; and in some cases, residual stress curvature. Thin film anti-ferroelectric PLZT was deposited in a preliminary experiment. The structure was amorphous with x-ray diffraction showing the beginnings of a structure at substrate temperatures of approximately 550/sup 0/C. This report summarizes the research and provides a sampling of the data taken during the report period.

  7. Development of large area transparent conducting oxides from a combinatorial lead for organic solid state lighting

    SciTech Connect

    Matson, Dean W.; Bonham, Charles C.; Swensen, James S.; Wang, Liang; Padmaperuma, Asanga B.; Gaspar, Daniel J.; Berry, J. J.; Sigdel, Ajaya K.; Gorrie, Christopher W.; Ginley, D. S.

    2009-09-01

    Organic light emitting device (OLEDs) may provide a low-cost, long-lived, and efficient wide area lighting solution if a number of challenges in reliability, cost and efficiency can be overcome. There is a need to develop new TCOs for use as the anode in a bottom-emitting device that do not contain In, have optimal work function, conductivity and visible light transmission properties, possess acceptable stability and possess a high work function to match the deep HOMO of blue OLED HTLs. We report here results from our efforts to scale up sputter deposition on large area substrates (up to 12”x12”) of TCO candidates (including Ga:ZnO and Zn:SnO) identified using combinatorial methods. We present transmission, electrical properties, work function, compositional and structural data for these films. Finally, we have evaluated the use of these materials in OLEDs, and show device performance comparisons between devices fabricated on combinatorial substrates, single composition substrates, and substrates grown at larger scale (up to 12”x12”). Post-operation analysis of the materials using a combination of surface analysis and electron microscopy techniques was performed. The device results demonstrate that we are able to generate substrates with the appropriate work function to reduce the operating voltage of blue phosphorescent OLEDs compared to commercial ITO, which we ascribe to improved work function-HOMO energy matching leading to more efficient charge injection into the device HTL.

  8. Developing a NASA Lead-Free Policy for Electronics - Lessons Learned

    NASA Technical Reports Server (NTRS)

    Sampson, Michael J.

    2008-01-01

    The National Aeronautics and Space Administration (NASA) is not required by United States or international law to use lead-free (Pb-free) electronic systems but international pressure in the world market is making it increasingly important that NASA have a Pb-free policy. In fact, given the international nature of the electronics market, all organizations need a Pb-free policy. This paper describes the factors which must be taken into account in formulating the policy, the tools to aid in structuring the policy and the unanticipated and difficult challenges encountered. NASA is participating in a number of forums and teams trying to develop effective approaches to controlling Pb-free adoption in high reliability systems. The activities and status of the work being done by these teams will be described. NASA also continues to gather information on metal whiskers, particularly tin based, and some recent examples will be shared. The current lack of a policy is resulting in "surprises" and the need to disposition undesirable conditions on a case-by-case basis. This is inefficient, costly and can result in sub-optimum outcomes.

  9. A Research Design for NASA-Funded Professional Development Projects

    NASA Astrophysics Data System (ADS)

    Bleicher, R. E.; Lambert, J.; Getty, S. R.

    2011-12-01

    This proposal outlines a research plan designed to measure gains in student learning resulting from their teachers participating in professional development. Project Description Misconceptions about global climate change (GCC) are prevalent in the general public (Kellstedt, Zahran, & Vedlitz, 2008; Washington & Cook, 2011). One solution is to provide high school students with a better grounding in the basic science and data that underlie GCC. The overarching goal of a NASA-funded project, Promoting Educational Leadership in Climate Change Literacy (PEL), is to increase GCC literacy in high school students. Research Design The research design is interpretative (Erickson, 2006), framed within a multi-method design, synthesizing both quantitative and qualitative data sources (Morse, 2003). Overall, the data will provide rich information about the PEL's impact on curriculum development, teacher pedagogical knowledge, and student learning. The expectancy-value theory of achievement motivation (E-V-C) (Fan, 2011; Wigfield & Eccles, 1994) provides a theoretical foundation for the research. Expectancy is the degree to which a teacher or student has reason to expect that they will be successful in school. Value indicates whether they think that performance at school will be worthwhile to them. Cost is the perceived sacrifices that must be undertaken, or factors that can inhibit, a successful performance at school. For students, data from an embedded E-V-C investigation will help articulate how E-V-C factors relate to student interest in science, continuing to study science, or embarking on STEM related careers. For teachers, the E-V-C measures will give insight into a key mediating variable on student achievement in science. The evaluation will seek to address research questions at the student and teacher levels. Table 1 presents a sample of research questions and data sources. This is a sample of a much larger set of questions that will be addressed in the project. Data

  10. Teaching Middle School Mathematics: A Resource For Teachers by the Teachers of PROJECT LINCS (Lead teachers INvolved in making ConnectionS).

    ERIC Educational Resources Information Center

    Illinois State Univ., Normal. Dept. of Mathematics.

    This resource book represents shared experiences of Project LINCS' (Lead teachers INvolved in making ConnectionS) teachers and staff in addressing the question, "Are we teaching mathematics so that all students will be empowered to use it flexibly, insightfully, and productively?" and other fundamental questions that are driving change in school…

  11. Leading Change: A Case Study of Leadership Practices from the Development of the Niagara County Community College Culinary Institute

    ERIC Educational Resources Information Center

    Caton, Jazmin; Mistriner, Mark

    2016-01-01

    The purpose of this case study was to evaluate the lessons learned from the development of a project that set out to revitalize an economically depressed area with an innovative approach to workforce development through partnerships. The focus was to utilize the development of the Niagara County Community College Culinary Institute as an example…

  12. Evaluation of the Benefits Attributable to Automotive Lighweight Materials Program Research and Development Projects

    SciTech Connect

    Das, S.

    2002-01-11

    The purpose of this project is to identify and test methods appropriate for estimating the benefits attributable to research and development (R and D) projects funded by the Automotive Lightweight Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). The program focuses on the development and validation of advanced lightweight materials technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. The work supports the goals of the Partnership for a New Generation of Vehicles (PNGV). Up to thirty percent of the improvement required to meet the PNGV goal of tripling vehicle fuel economy and much of its cost, safety, and recyclability goal depend on the lightweight materials. Funded projects range from basic materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers.

  13. EFFECT OF LOW-LEVEL LEAD EXPOSURE ON PEDIATRIC NEUROBEHAVIORAL AND PHYSICAL DEVELOPMENT: CURRENT FINDINGS AND FUTURE DIRECTIONS

    EPA Science Inventory

    Studies of the relationship between lead exposure and the physical and neurobehavioral development of children constitute an important part of the scientific foundation for regulatory policies in many countries. The United States Environmental Protection Agency (U.S. EPA) recentl...

  14. Self-service for software development projects and HPC activities

    NASA Astrophysics Data System (ADS)

    Husejko, M.; Høimyr, N.; Gonzalez, A.; Koloventzos, G.; Asbury, D.; Trzcinska, A.; Agtzidis, I.; Botrel, G.; Otto, J.

    2014-05-01

    This contribution describes how CERN has implemented several essential tools for agile software development processes, ranging from version control (Git) to issue tracking (Jira) and documentation (Wikis). Running such services in a large organisation like CERN requires many administrative actions both by users and service providers, such as creating software projects, managing access rights, users and groups, and performing tool-specific customisation. Dealing with these requests manually would be a time-consuming task. Another area of our CERN computing services that has required dedicated manual support has been clusters for specific user communities with special needs. Our aim is to move all our services to a layered approach, with server infrastructure running on the internal cloud computing infrastructure at CERN. This contribution illustrates how we plan to optimise the management of our of services by means of an end-user facing platform acting as a portal into all the related services for software projects, inspired by popular portals for open-source developments such as Sourceforge, GitHub and others. Furthermore, the contribution will discuss recent activities with tests and evaluations of High Performance Computing (HPC) applications on different hardware and software stacks, and plans to offer a dynamically scalable HPC service at CERN, based on affordable hardware.

  15. Alaska Oil and Gas Exploration, Development, and Permitting Project

    SciTech Connect

    Richard McMahon; Robert Crandall

    2006-03-31

    This is the final technical report for Project 15446, covering the grant period of October 2002 through March 2006. This project connects three parts of the oil exploration, development, and permitting process to form the foundation for an advanced information technology infrastructure to better support resource development and resource conservation. Alaska has nearly one-quarter of the nation's supply of crude oil, at least five billion barrels of proven reserves. The American Association of Petroleum Geologists report that the 1995 National Assessment identified the North Slope as having 7.4 billion barrels of technically recoverable oil and over 63 trillion cubic feet of natural gas. From these reserves, Alaska produces roughly one-fifth of the nation's daily crude oil production, or approximately one million barrels per day from over 1,800 active wells. The broad goal of this grant is to increase domestic production from Alaska's known producing fields through the implementation of preferred upstream management practices. (PUMP). Internet publication of extensive and detailed geotechnical data is the first task, improving the permitting process is the second task, and building an advanced geographical information system to offer continuing support and public access of the first two goals is the third task. Excellent progress has been made on all three tasks; the technical objectives as defined by the approved grant sub-tasks have been met. The end date for the grant was March 31, 2006.

  16. Management of a large distributed control system development project

    SciTech Connect

    Gurd, D. P.

    2002-01-01

    Building an accelerator at six geographically dispersed sites is quite mad, but politically expedient. The Spallation Neutron Source (SNS), currently under construction in Oak Ridge, Tennessee, combines a pulsed 1 Gev H{sup -} superconducting linac with a compressor ring to deliver 2 MW of beam power to a liquid mercury target for neutron production [1]. Accelerator components, target and experimental (neutron-scattering) instruments are being developed collaboratively by Lawrence Berkeley (Ion Source and Front End), Los Alamos (Linac), Thomas Jefferson (Cryosystems), Brookhaven (Compressor Ring), Oak Ridge (Target and Conventional Facilities) and Argonne (Neutron Scattering Instruments) National Laboratories. Similarly, a team distributed among all of the participating laboratories is developing the EPICS-based control system. this paper discusses the management model and strategies being used to address the unusual issues of organization, communication, standardization, integration and hand-off inherent in this widely-distributed project.

  17. Alfalfa variety development. Minnesota Agripower Project, Task II research report

    SciTech Connect

    Lamb, J.F.S.; Samac, D.A.; Sheaffer, C.C.

    1997-10-30

    This report briefly summarizes preliminary results from crossbreeding alfalfa to develop desirable characteristics for a dedicated biomass feed stock. The varieties development is part of a larger project which includes preparation and gasification of the alfalfa stems for energy production, and use of the co-product alfalfa leaves in livestock feed. The desired alfalfa traits include winter hardiness, resistance to major pathogens, resistance to foliar disease complexes, many thick, tall, solid, non-lodging stems with high lignin content, delayed flowering, and high quality leaves retained through harvest. Currently no alfalfa varieties meet these criteria. Three crosses were made using old European varieties, with thick stems, and modern resistant varieties. The crossbreeds showed some resistance to diseases, but increased resistance is needed to maximize leaf and steam yield. 1 tab.

  18. An Opportunity to Lead Sustainably: The Benefits and Considerations of Student-Led Green Revolving Fund Projects

    ERIC Educational Resources Information Center

    Kononenko, Kevin

    2012-01-01

    In recent years, energy- and resource-reduction projects have compelled student leaders to create sustainability projects on campuses across the country. This paper examines the role that students play in green revolving funds, including identification, approval, and management. After speaking with numerous students on a variety of campuses, it is…

  19. Waste Tank Vapor Project: Tank vapor database development

    SciTech Connect

    Seesing, P.R.; Birn, M.B.; Manke, K.L.

    1994-09-01

    The objective of the Tank Vapor Database (TVD) Development task in FY 1994 was to create a database to store, retrieve, and analyze data collected from the vapor phase of Hanford waste tanks. The data needed to be accessible over the Hanford Local Area Network to users at both Westinghouse Hanford Company (WHC) and Pacific Northwest Laboratory (PNL). The data were restricted to results published in cleared reports from the laboratories analyzing vapor samples. Emphasis was placed on ease of access and flexibility of data formatting and reporting mechanisms. Because of time and budget constraints, a Rapid Application Development strategy was adopted by the database development team. An extensive data modeling exercise was conducted to determine the scope of information contained in the database. a A SUN Sparcstation 1000 was procured as the database file server. A multi-user relational database management system, Sybase{reg_sign}, was chosen to provide the basic data storage and retrieval capabilities. Two packages were chosen for the user interface to the database: DataPrism{reg_sign} and Business Objects{trademark}. A prototype database was constructed to provide the Waste Tank Vapor Project`s Toxicology task with summarized and detailed information presented at Vapor Conference 4 by WHC, PNL, Oak Ridge National Laboratory, and Oregon Graduate Institute. The prototype was used to develop a list of reported compounds, and the range of values for compounds reported by the analytical laboratories using different sample containers and analysis methodologies. The prototype allowed a panel of toxicology experts to identify carcinogens and compounds whose concentrations were within the reach of regulatory limits. The database and user documentation was made available for general access in September 1994.

  20. Project development teams: a novel mechanism for accelerating translational research.

    PubMed

    Sajdyk, Tammy J; Sors, Thomas G; Hunt, Joe D; Murray, Mary E; Deford, Melanie E; Shekhar, Anantha; Denne, Scott C

    2015-01-01

    The trend in conducting successful biomedical research is shifting from individual academic labs to coordinated collaborative research teams. Teams of experienced investigators with a wide variety of expertise are now critical for developing and maintaining a successful, productive research program. However, assembling a team whose members have the right expertise requires a great deal of time and many resources. To assist investigators seeking such resources, the Indiana Clinical and Translational Sciences Institute (Indiana CTSI) created the Project Development Teams (PDTs) program to support translational research on and across the Indiana University-Purdue University Indianapolis, Indiana University, Purdue University, and University of Notre Dame campuses. PDTs are multidisciplinary committees of seasoned researchers who assist investigators, at any stage of research, in transforming ideas/hypotheses into well-designed translational research projects. The teams help investigators capitalize on Indiana CTSI resources by providing investigators with, as needed, mentoring and career development; protocol development; pilot funding; institutional review board, regulatory, and/or nursing support; intellectual property support; access to institutional technology; and assistance with biostatistics, bioethics, recruiting participants, data mining, engaging community health, and collaborating with other investigators.Indiana CTSI leaders have analyzed metrics, collected since the inception of the PDT program in 2008 from both investigators and team members, and found evidence strongly suggesting that the highly responsive teams have become an important one-stop venue for facilitating productive interactions between basic and clinical scientists across four campuses, have aided in advancing the careers of junior faculty, and have helped investigators successfully obtain external funds. PMID:25319172

  1. Texas LPG fuel cell development and demonstration project

    SciTech Connect

    None, None

    2004-07-26

    The State Energy Conservation Office has executed its first Fuel Cell Project which was awarded under a Department of Energy competitive grant process. The Texas LPG Fuel Processor Development and Fuel Cell Demonstration Program is a broad-based public/private partnership led by the Texas State Energy Conservation Office (SECO). Partners include the Alternative Fuels Research and Education Division (AFRED) of the Railroad Commission of Texas; Plug Power, Inc., Latham, NY, UOP/HyRadix, Des Plaines, IL; Southwest Research Institute (SwRI), San Antonio, TX; the Texas Natural Resource Conservation Commission (TNRCC), and the Texas Department of Transportation (TxDOT). The team proposes to mount a development and demonstration program to field-test and evaluate markets for HyRadix's LPG fuel processor system integrated into Plug Power's residential-scale GenSys(TM) 5C (5 kW) PEM fuel cell system in a variety of building types and conditions of service. The program's primary goal is to develop, test, and install a prototype propane-fueled residential fuel cell power system supplied by Plug Power and HyRadix in Texas. The propane industry is currently funding development of an optimized propane fuel processor by project partner UOP/HyRadix through its national checkoff program, the Propane Education and Research Council (PERC). Following integration and independent verification of performance by Southwest Research Institute, Plug Power and HyRadix will produce a production-ready prototype unit for use in a field demonstration. The demonstration unit produced during this task will be delivered and installed at the Texas Department of Transportation's TransGuide headquarters in San Antonio, Texas. Simultaneously, the team will undertake a market study aimed at identifying and quantifying early-entry customers, technical and regulatory requirements, and other challenges and opportunities that need to be addressed in planning commercialization of the units. For further

  2. Project Report on Development of a Safeguards Approach for Pyroprocessing

    SciTech Connect

    Robert Bean

    2010-09-01

    The Idaho National Laboratory has undertaken an effort to develop a standard safeguards approach for international commercial pyroprocessing facilities. This report details progress for the fiscal year 2010 effort. A component by component diversion pathway analysis has been performed, and has led to insight on the mitigation needs and equipment development needed for a valid safeguards approach. The effort to develop an in-hot cell detection capability led to the digital cloud chamber, and more importantly, the significant potential scientific breakthrough of the inverse spectroscopy algorithm, including the ability to identify energy and spatial location of gamma ray emitting sources with a single, non-complex, stationary radiation detector system. Curium measurements were performed on historical and current samples at the FCF to attempt to determine the utility of using gross neutron counting for accountancy measurements. A solid cost estimate of equipment installation at FCF has been developed to guide proposals and cost allocations to use FCF as a test bed for safeguards measurement demonstrations. A combined MATLAB and MCNPX model has been developed to perform detector placement calculations around the electrorefiner. Early harvesting has occurred wherein the project team has been requested to provide pyroprocessing technology and safeguards short courses.

  3. NASA redox storage system development project, calendar year 1982

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Development was continued for iron-chromium battery operation at 65 C. Membranes that were adequate at 25 C were shown to be unacceptable at 65 C with regard to selectivity. This led to the elevated-temperature, mixed-reactant mode of operation, in which each reactant solution, when discharged, contains both ferrous and chromic chlorides. This operating mode allows the use of very low-resistivity membranes, resulting in high energy efficiencies at current densities. It also allows the use of very simple techniques to correct for solvent or reactant transfer through cell membranes. Screening of candidate catalysts for the chromium electrode led to the development of a bismuth-lead candidate having several attractive characteristics.

  4. Choosing and Developing the Right Leadership Styles for Projects

    NASA Technical Reports Server (NTRS)

    Mueller, Ralf

    2008-01-01

    Analyzing extensive questionnaires completed by 400 project management professionals, Professor Rodney Turner of the Lille Graduate School of Management and I have identified competencies that contribute significantly to project management success. Our research helps define the managerial and emotional competencies needed to make projects work. We also found that different kinds of projects call for different combinations of competencies.

  5. Sample Return Propulsion Technology Development Under NASA's ISPT Project

    NASA Technical Reports Server (NTRS)

    Anderson, David J.; Dankanich, John; Hahne, David; Pencil, Eric; Peterson, Todd; Munk, Michelle M.

    2011-01-01

    Abstract In 2009, the In-Space Propulsion Technology (ISPT) program was tasked to start development of propulsion technologies that would enable future sample return missions. Sample return missions can be quite varied, from collecting and bringing back samples of comets or asteroids, to soil, rocks, or atmosphere from planets or moons. As a result, ISPT s propulsion technology development needs are also broad, and include: 1) Sample Return Propulsion (SRP), 2) Planetary Ascent Vehicles (PAV), 3) Multi-mission technologies for Earth Entry Vehicles (MMEEV), and 4) Systems/mission analysis and tools that focuses on sample return propulsion. The SRP area includes electric propulsion for sample return and low cost Discovery-class missions, and propulsion systems for Earth Return Vehicles (ERV) including transfer stages to the destination. Initially the SRP effort will transition ongoing work on a High-Voltage Hall Accelerator (HIVHAC) thruster into developing a full HIVHAC system. SRP will also leverage recent lightweight propellant-tanks advancements and develop flight-qualified propellant tanks with direct applicability to the Mars Sample Return (MSR) mission and with general applicability to all future planetary spacecraft. ISPT s previous aerocapture efforts will merge with earlier Earth Entry Vehicles developments to form the starting point for the MMEEV effort. The first task under the Planetary Ascent Vehicles (PAV) effort is the development of a Mars Ascent Vehicle (MAV). The new MAV effort will leverage past MAV analysis and technology developments from the Mars Technology Program (MTP) and previous MSR studies. This paper will describe the state of ISPT project s propulsion technology development for future sample return missions.12

  6. Development of Joint Climate and Discharge Projections for the International Rhine River Basin - the CHR RheinBlick2050 Project

    NASA Astrophysics Data System (ADS)

    Görgen, K.; Pfister, L.

    2008-12-01

    The anticipated climate change will lead to modified hydro-meteorological regimes that influence discharge behaviour and hydraulics of rivers. This has variable impacts on managed (anthropogenic) and unmanaged (natural) systems, depending on their sensitivity and vulnerability (ecology, economy, infrastructure, transport, energy production, water management, etc.). Decision makers in these contexts need adequate adaptation strategies to minimize adverse effects of climate change, i.e. an improved knowledge on the potential impacts including uncertainties means an extension of the informed options open to users. The goal of the highly applied study presented here is the development of joint, consistent climate and discharge projections for the international Rhine River catchments (Switzerland, France, Germany, Netherlands) in order to assess future changes of hydro-meteorological regimes in the meso- and macroscale Rhine River catchments and to derive and improve the understanding of such impacts on hydrologic and hydraulic processes. The RheinBlick2050 project is an international effort initiated by the International Commission for the Hydrology of the Rhine Basin (CHR) in close cooperation with the International Commission for the Protection of the Rhine. The core experiment design foresees a data-synthesis, multi-model approach where (transient) (bias- corrected) regional climate change projections are used as forcing data for existing calibrated hydrological (and hydraulic) models at a daily temporal resolution over mesoscale catchments of the Rhine River. Mainly for validation purposes, hydro-meteorological observations from national weather services are compiled into a new consistent 5 km x 5 km reference dataset from 1961 to 2005. RCM data are mainly used from the ENSEMBLES project and other existing dynamical downscaling model runs to derive probabilistic ensembles and thereby also access uncertainties on a regional scale. A benchmarking is helping to

  7. Quality Assurance. Summary Report of a Project to Develop and Evaluate a Quality Assurance Package. FEU/PICKUP Project Report.

    ERIC Educational Resources Information Center

    Further Education Unit, London (England).

    A curriculum development project began with a market survey to investigate the demand for training in quality assurance (QA). The project objective was to develop a final study program that would cater to a broad range of employees, from operative to senior management; enable employees to appreciate their potential role within a QA system; and…

  8. Review: Lead exposure in battery manufacturing and recycling in developing countries and among children in nearby communities.

    PubMed

    Gottesfeld, Perry; Pokhrel, Amod K

    2011-09-01

    The battery industry is the largest consumer of lead, using an estimated 80% of the global lead production. The industry is also rapidly expanding in emerging market countries. A review of published literature on exposures from lead-acid battery manufacturing and recycling plants in developing countries was conducted. The review included studies from 37 countries published from 1993 to 2010 and excluded facilities in developed countries, such as the United States and those in Western Europe, except for providing comparisons to reported findings. The average worker blood lead level (BLL) in developing countries was 47 μg/dL in battery manufacturing plants and 64 μg/dL in recycling facilities. Airborne lead concentrations reported in battery plants in developing countries averaged 367 μg/m3, which is 7-fold greater than the U.S. Occupational Safety and Health Administration's 50 μg/m3 permissible exposure limit. The geometric mean BLL of children residing near battery plants in developing countries was 19 μg/dL, which is about 13-fold greater than the levels observed among children in the United States. The blood lead and airborne lead exposure concentrations for battery workers were substantially higher in developing countries than in the United States. This disparity may worsen due to rapid growth in lead-acid battery manufacturing and recycling operations worldwide. Given the lack of regulatory and enforcement capacity in most developing countries, third-party certification programs may be the only viable option to improve conditions. PMID:21793732

  9. Development and Validation of a Project Package for Junior Secondary School Basic Science

    ERIC Educational Resources Information Center

    Udofia, Nsikak-Abasi

    2014-01-01

    This was a Research and Developmental study designed to develop and validate projects for Junior Secondary School Basic Science instruction and evaluation. The projects were developed using the project blueprint and sent for validation by experts in science education and measurement and evaluation; using a project validation scale. They were to…

  10. 49 CFR 611.7 - Relation to planning and project development processes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... with 23 CFR part 450. To be eligible for FTA capital investment funding, a proposed project must be... 49 Transportation 7 2010-10-01 2010-10-01 false Relation to planning and project development... Relation to planning and project development processes. All new start projects proposed for...

  11. 49 CFR 611.7 - Relation to planning and project development processes.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... with 23 CFR part 450. To be eligible for FTA capital investment funding, a proposed project must be... 49 Transportation 7 2011-10-01 2011-10-01 false Relation to planning and project development... Relation to planning and project development processes. All new start projects proposed for...

  12. Retrieval process development and enhancements project Fiscal year 1995: Simulant development technology task progress report

    SciTech Connect

    Golcar, G.R.; Bontha, J.R.; Darab, J.G.

    1997-01-01

    The mission of the Retrieval Process Development and Enhancements (RPD&E) project is to develop an understanding of retrieval processes, including emerging and existing technologies, gather data on these technologies, and relate the data to specific tank problems such that end-users have the requisite technical bases to make retrieval and closure decisions. The development of waste simulants is an integral part of this effort. The work of the RPD&E simulant-development task is described in this document. The key FY95 accomplishments of the RPD&E simulant-development task are summarized below.

  13. NASA's Exploration Technology Development Program Energy Storage Project Battery Technology Development

    NASA Technical Reports Server (NTRS)

    Reid, Concha M.; Miller, Thomas B.; Mercer, Carolyn R.; Jankovsky, Amy L.

    2010-01-01

    Technical Interchange Meeting was held at Saft America s Research and Development facility in Cockeysville, Maryland on Sept 28th-29th, 2010. The meeting was attended by Saft, contractors who are developing battery component materials under contracts awarded through a NASA Research Announcement (NRA), and NASA. This briefing presents an overview of the components being developed by the contractor attendees for the NASA s High Energy (HE) and Ultra High Energy (UHE) cells. The transition of the advanced lithium-ion cell development project at NASA from the Exploration Technology Development Program Energy Storage Project to the Enabling Technology Development and Demonstration High Efficiency Space Power Systems Project, changes to deliverable hardware and schedule due to a reduced budget, and our roadmap to develop cells and provide periodic off-ramps for cell technology for demonstrations are discussed. This meeting gave the materials and cell developers the opportunity to discuss the intricacies of their materials and determine strategies to address any particulars of the technology.

  14. Development of lead iodide perovskite solar cells using three-dimensional titanium dioxide nanowire architectures.

    PubMed

    Yu, Yanhao; Li, Jianye; Geng, Dalong; Wang, Jialiang; Zhang, Lushuai; Andrew, Trisha L; Arnold, Michael S; Wang, Xudong

    2015-01-27

    Three-dimensional (3D) nanowire (NW) architectures are considered as superior electrode design for photovoltaic devices compared to NWs or nanoparticle systems in terms of improved large surface area and charge transport properties. In this paper, we report development of lead iodide perovskite solar cells based on a novel 3D TiO2 NW architectures. The 3D TiO2 nanostructure was synthesized via surface-reaction-limited pulsed chemical vapor deposition (SPCVD) technique that also implemented the Kirkendall effect for complete ZnO NW template conversion. It was found that the film thickness of 3D TiO2 can significantly influence the photovoltaic performance. Short-circuit current increased with the TiO2 length, while open-circuit voltage and fill factor decreased with the length. The highest power conversion efficiency (PCE) of 9.0% was achieved with ∼ 600 nm long 3D TiO2 NW structures. Compared to other 1D nanostructure arrays (TiO2 nanotubes, TiO2-coated ZnO NWs and ZnO NWs), 3D TiO2 NW architecture was able to achieve larger amounts of perovskite loading, enhanced light harvesting efficiency, and increased electron-transport property. Therefore, its PCE is 1.5, 2.3, and 2.8 times higher than those of TiO2 nanotubes, TiO2-coated ZnO NWs, and ZnO NWs, respectively. The unique morphological advantages, together with the largely suppressed hysteresis effect, make 3D hierarchical TiO2 a promising electrode selection in designing high-performance perovskite solar cells. PMID:25549153

  15. NTRCI Legacy Engine Research and Development Project Final Technical Report

    SciTech Connect

    Smith-Holbert, Connie; Petrolino, Joseph; Watkins, Bart; Irick, David

    2011-12-31

    The Legacy engine is a completely new design, transitional diesel engine, replacing the reciprocating engine with a rotary engine. The Legacy engine offers significant advances over conventional internal combustion engines in 1) power to weight ratio; 2) multiple fuel acceptance; 3) fuel economy; and 4) environmental compliance. These advances are achieved through a combination of innovative design geometry, rotary motion, aspiration simplicity, and manufacturing/part simplicity. The key technical challenge to the Legacy engine's commercialization, and the focus of this project, was the development of a viable roton tip seal. The PST concept for the roton tip seal was developed into a manufacturable design. The design was evaluated using a custom designed and fabricated seal test fixture and further refined. This design was incorporated into the GEN2.5A prototype and tested for achievable compression pressure. The Decision Point at the end of Phase 1 of the project (described below) was to further optimize the existing tip seal design. Enhancements to the tip seal design were incorporated into the GEN2.5B prototype and tested and evaluated using the iterative research strategy described below. Compression pressures adequate for compression ignition of diesel fuel were achieved, although not consistently in all combustion volumes. The variation in compression pressures was characterized versus design features. As the roton tip seal performance was improved, results pointed toward inadequate performance of the housing side seals. Enhancement of the housing side seal system was accomplished using a custom designed side seal test fixture. The design enhancements developed with the test fixture were also incorporated into the GEN2.5B prototype and tested and evaluated using the iterative research strategy described below. Finally, to simplify the requirements for the roton tip seals and to enhance the introduction and combustion of fuel, a flush-mount fuel injector was

  16. Assessing human rights impacts in corporate development projects

    SciTech Connect

    Salcito, Kendyl; Utzinger, Jürg; Weiss, Mitchell G.; Münch, Anna K.; Singer, Burton H.; Krieger, Gary R.; Wielga, Mark

    2013-09-15

    Human rights impact assessment (HRIA) is a process for systematically identifying, predicting and responding to the potential impact on human rights of a business operation, capital project, government policy or trade agreement. Traditionally, it has been conducted as a desktop exercise to predict the effects of trade agreements and government policies on individuals and communities. In line with a growing call for multinational corporations to ensure they do not violate human rights in their activities, HRIA is increasingly incorporated into the standard suite of corporate development project impact assessments. In this context, the policy world's non-structured, desk-based approaches to HRIA are insufficient. Although a number of corporations have commissioned and conducted HRIA, no broadly accepted and validated assessment tool is currently available. The lack of standardisation has complicated efforts to evaluate the effectiveness of HRIA as a risk mitigation tool, and has caused confusion in the corporate world regarding company duties. Hence, clarification is needed. The objectives of this paper are (i) to describe an HRIA methodology, (ii) to provide a rationale for its components and design, and (iii) to illustrate implementation of HRIA using the methodology in two selected corporate development projects—a uranium mine in Malawi and a tree farm in Tanzania. We found that as a prognostic tool, HRIA could examine potential positive and negative human rights impacts and provide effective recommendations for mitigation. However, longer-term monitoring revealed that recommendations were unevenly implemented, dependent on market conditions and personnel movements. This instability in the approach to human rights suggests a need for on-going monitoring and surveillance. -- Highlights: • We developed a novel methodology for corporate human rights impact assessment. • We piloted the methodology on two corporate projects—a mine and a plantation. • Human

  17. The REVEL Project: an Oceanographic Research Immersion Professional Development Program

    NASA Astrophysics Data System (ADS)

    Robigou, V.

    2004-12-01

    The REVEL Project (Research and Education: Volcanoes, Exploration and Life) is an NSF-funded, professional development program for middle and high school science teachers that are motivated to use deep-sea research and seafloor exploration as tools to implement inquiry-based science in their classrooms, schools, and districts, and to share their experiences with their communities. Initiated in 1996 as a regional program for Northwest science educators, REVEL evolved into a multi-institutional program inviting teachers to practice doing research on sea-going research expeditions. Today the project offers teachers throughout the U. S. an opportunity to participate and contribute to international, multidisciplinary, deep-sea research in the Northeast Pacific ocean to study the relationship between geological processes such as earthquakes and volcanism, fluid circulation and life on our planet. In addition, the program supports teachers to implement research-based, data-oriented activities in their classrooms, and prepares them to use curriculum that will enhance student learning through the research process. Evaluation for year 2003-2004 of the program reveals that the program is designed as a successful research immersion opportunity during which teachers learn content, process, culture and ethos of authentic research. Qualitative results indicate that teachers who have participated in the program assimilate the scientific process over several years and share their expertise in ways most beneficial for their communities for years to come.

  18. Development of HTS Cable System for ALBANY Project

    NASA Astrophysics Data System (ADS)

    Watanabe, M.; Yumura, H.; Takigawa, H.; Ito, H.; Ashibe, Y.; Kato, T.; Suzawa, C.; Masuda, T.; Sato, K.; Isojima, S.

    2006-06-01

    High temperature superconducting (HTS) cable is anticipated to transmit a large amount of electricity with a compact size and can reduce the transmission loss and greenhouse gas emission. The Albany project is being undertaken to verify the practicability of a long HTS cable in the real grid by performing a long-term operation test. The cable is 350-meter long and carries 800 A at 34.5 kV between two electric power substations (Menands and Riverside) in Albany, N.Y. [1]. The project is scheduled to run from 2002 to 2007 and is proceeding as planned. The HTS cable and its apparatus were manufactured in Japan, and the cable was shipped to the USA in the middle of August. After it arrives at the site, the cable installation and the apparatus assembly will be carried out sequentially. This system is expected to begin operating early next year after initial cooling. This paper gives an overview and the current status of the development of the HTS cable system.

  19. Present Status of the ILC Project and Development

    SciTech Connect

    Ross, M.; Walker, N.; Yamamoto, A.; /KEK, Tsukuba

    2011-09-01

    The Technical Design of the International Linear Collider (ILC) Project will be finished in late 2012. The Technical Design Report (TDR) will include a description of the updated design, with a cost estimate and a project plan, and the results of research and development (R & D) done in support of the ILC. Results from directed ILC R & D are used to reduce the cost and risk associated with the ILC design. We present a summary of key challenges and show how the global R & D effort has addressed them. The most important activity has been in pursuit of very high gradient superconducting RF linac technology. There has been excellent progress toward the goal of practical industrial production of niobium sheet-metal cavities with gradient performance in excess of 35 MV/m. In addition, three purpose-built beam test facilities have been constructed and used to study and demonstrate high current linac performance, electron-cloud beam dynamics and precision beam control. The report also includes a summary of component design studies and conventional facilities cost optimization design studies.

  20. Development of Procedures for Assessing the Impact of Vocational Education Research and Development on Vocational Education (Project IMPACT). Volume 4--A Case Study of Illinois Projects in Horticulture.

    ERIC Educational Resources Information Center

    Hook, Colin; Ethridge, James

    As part of Project IMPACT's efforts to identify and develop procedures for complying with the impact requirements of Public Law 94-482, a case study was made of Illinois Projects in Horticulture. Fourteen horticulture projects in high schools and junior colleges were discovered through a previous study, personal interviews with two University of…

  1. Introduction of the NWP Model Development Project at Korea Institute of Atmospheric Prediction Systems - KIAPS

    NASA Astrophysics Data System (ADS)

    Kim, Y.

    2012-12-01

    Korea Meteorological Administration (KMA) launched a 9-year project in 2011 to develop Korea's own global NWP system with the total funding of about 100 million US dollars. To lead the effort, Korea Institute of Atmospheric Prediction Systems (KIAPS) was founded by KMA as a non-profit foundation. The project consists of three stages. We are in the middle of the first stage (2011-2013), which is to set up the Institute, recruit researchers, lay out plans for the research and development, and design the basic structure and explore/develop core NWP technologies. The second stage (2014-2016) aims at developing the modules for the dynamical core, physical parameterizations and data assimilation systems as well as the system framework and couplers to connect the modules in a systematic and efficient way, and eventually building a prototype NWP system. The third stage (2017-2019) is for evaluating the prototype system by selecting/improving modules, and refining/finalizing it for operational use at KMA as well as developing necessary post-processing systems. In 2012, we are designing key modules for the dynamical core by adopting existing and/or developing new cores, and developing the barographic model first and the baroclinic model later with code parallelization and optimization in mind. We are collecting various physical parameterization schemes, mostly developed by Korean scientists, and evaluating and improving them by using single-column and LES models, etc. We are designing control variables for variational data assimilation systems, constructing testbeds for observational data pre-processing systems, developing linear models for a barographic system, designing modules for cost function minimization. We are developing the module framework, which is flexible for prognostic and diagnostic variables, designing the I/O structure of the system, coupling modules for external systems, and also developing post-processing systems. At the meeting, we will present the

  2. Education for Rural Development: The Case of the UPCA/BNE Barrio Development School Project.

    ERIC Educational Resources Information Center

    Contado, Tito E.

    The Barrio Development School, a 4-year action-research project which has been in operation for 2 years, is located at Masaya, Bay, Laguna, Philippines. Begun by the University of the Philippines, College of Agriculture, and the Board of National Education, it is a secondary school program for barrio youths who have decided to stay, live, and work…

  3. Development and evaluation of an air quality modeling approach to assess near-field impacts of lead emissions from piston-engine aircraft operating on leaded aviation gasoline

    NASA Astrophysics Data System (ADS)

    Carr, Edward; Lee, Mark; Marin, Kristen; Holder, Christopher; Hoyer, Marion; Pedde, Meredith; Cook, Rich; Touma, Jawad

    2011-10-01

    Since aviation gasoline is now the largest remaining source of lead (Pb) emissions to the air in the United States, there is increased interest by regulatory agencies and the public in assessing the impacts on residents living in close proximity to these sources. An air quality modeling approach using U.S. Environmental Protection Agency's (EPA) American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD) was developed and evaluated for estimating atmospheric concentrations of Pb at and near general aviation airports where leaded aviation gasoline (avgas) is used. These detailed procedures were made to accurately characterize emissions and dispersion leading to improved model performance for a pollutant with concentrations that vary rapidly across short distances. The new aspects of this work included a comprehensive Pb emission inventory that incorporated sub-daily time-in-mode (TIM) activity data for piston-engine aircraft, aircraft-induced wake turbulence, plume rise of the aircraft exhaust, and allocation of approach and climb-out emissions to 50-m increments in altitude. To evaluate the modeling approach used here, ambient Pb concentrations were measured upwind and downwind of the Santa Monica Airport (SMO) and compared to modeled air concentrations. Modeling results paired in both time and space with monitoring data showed excellent overall agreement (absolute fractional bias of 0.29 winter, 0.07 summer). The modeling results on individual days show Pb concentration gradients above the urban background concentration of 10 ng m-3 extending downwind up to 900 m from the airport, with a crosswind extent of 400 m. Three-month average modeled concentrations above the background were found to extend to a maximum distance of approximately 450 m beyond the airport property in summer and fall. Modeling results show aircraft engine “run-up” is the most important source contribution to the maximum Pb concentration. Sensitivity analysis

  4. EMF Rapid Program Engineering Projects, Project 1, Development of Recommendations for Guidelines for Field Source Measurement

    SciTech Connect

    Electric Research and Management, Inc.

    1997-03-11

    The goal of this project is to develop a protocol for measuring the electric and magnetic fields around sources. Data from these measurements may help direct future biological effects research by better defining the complexity of magnetic and electric fields to which humanity is exposed, as well asprovide the basis for rigorous field exposure analysis and risk assessment once the relationship between field exposure and biological response. is better understood. The data base also should have sufficient spatial and temporal characteristics to guide electric and magnetic field management. The goal of Task A is to construct a set of characteristics that would be ideal to have for guiding and interpreting biological studies and for focusing any future effort at field management. This ideal set will then be quantified and reduced according to the availability (or possible development of) instrumentation to measure the desired characteristics. Factors that also will be used to define pragmatic data sets will be the cost of collecting the data, the cost of developing an adequate data base, and the needed precision in measuring specific characteristics. A field, electric or magnetic, will always be ,some function of time and space. The first step in this section of the protocol development will be to determine what span of time and what portion of space are required to quantify the electric and magnetic fields around sources such as appliances and electrical apparatus. Constraints on time will be set by examining measurement limitations and biological data requirements.

  5. Developing a Project-Based Secondary School Science Academy

    NASA Astrophysics Data System (ADS)

    Adkins, J.

    2009-12-01

    For the past several years Deer Valley High School (Antioch, CA) has hosted a space academy known as the ESPACE academy (for Earth, Space Astronomy Center for Education). This academy has promoted original student primary research on astronomy and physics topics and initiated the school’s first entries into science fair and directed a number of students into science careers. During the next school year the Antioch Unified School District is supporting the expansion of the academy into a general science academy encompassing all areas of science, a move into a new building, and the development of a science academy model making it easier to integrate the academy into the larger school’s academic program. The presentation will discuss the design of the new academy and the involvement of students in projects connected to NASA’s WISE, Spitzer, and other missions.

  6. New developments from the Contemporary Physics Educ Project

    NASA Astrophysics Data System (ADS)

    Barnett, Michael

    2003-04-01

    The Contemporary Physics Education Project has just completed the fieldtest version of their fourth chart. The chart, entitled "The History and Fate of the Universe," will appear in the March issue of The Physics Teacher magazine. Previous charts were on particle physics, plasma physics, and nuclear physics. In addition, to presenting the new chart, other educational programs related to CPEP will be discussed, such as the Particle Adventure. This summer a new website, called the Universe Adventure, will be developed to complement the new chart. More than 200,000 copies of CPEP charts have been distributed to high schools and colleges. The Particle Adventure website gets five million hits a year. CPEP is a nonprofit group that also produces text materials, CDROMs, and hands-on activities, as well as holding many workshops for teachers.

  7. DEVELOPING AND IMPLEMENTING AN ESTUARINE WATER QUALITY MONITORING, ASSESSMENT AND OUTREACH PROGRAM/THE MYSOUND PROJECT

    EPA Science Inventory

    EPA has developed a technology transfer handbook for the EMPACT MYSound Project. The handbook highlights information and monitoring technologies developed from the EMPACT Long Island Sound Marine Monitoring (MYSound) Project. As part of the MYSound effort, telemetering data-buoys...

  8. EU Carbowaste project: Development of a toolbox for graphite waste management

    NASA Astrophysics Data System (ADS)

    Metcalfe, M. P.; Banford, A. W.; Eccles, H.; Norris, S.

    2013-05-01

    A four year collaborative European Project 'Treatment and Disposal of Irradiated Graphite and other Carbonaceous Waste (Carbowaste)' was launched in May 2008 under the 7th EURATOM Framework Programme. The aim of the project is to develop best practices in the retrieval, treatment and disposal of irradiated graphite, addressing both existing legacy waste as well as waste from graphite-based nuclear fuel resulting from a new generation of nuclear reactors. This paper covers the activities led by the National Nuclear Laboratory in partnership with the Nuclear Decommissioning Authority in the first year of the project, which includes the lead role in the compilation of a review volume on the extent of irradiated graphite waste globally and the approaches being taken to manage it. An overview is also provided of modelling activities in year two of the project: the application of modelling techniques to the prediction of radiological inventories, to the radiological impact of C-14 and Cl-36 releases on the biosphere and to the decommissioning of Magnox reactor cores.

  9. Overview and Summary of the Advanced Mirror Technology Development Project

    NASA Astrophysics Data System (ADS)

    Stahl, H. P.

    2014-01-01

    Advanced Mirror Technology Development (AMTD) is a NASA Strategic Astrophysics Technology project to mature to TRL-6 the critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable mission can be considered by the 2020 Decadal Review. The developed mirror technology must enable missions capable of both general astrophysics & ultra-high contrast observations of exoplanets. Just as JWST’s architecture was driven by launch vehicle, a future UVOIR mission’s architectures (monolithic, segmented or interferometric) will depend on capacities of future launch vehicles (and budget). Since we cannot predict the future, we must prepare for all potential futures. Therefore, to provide the science community with options, we are pursuing multiple technology paths. AMTD uses a science-driven systems engineering approach. We derived engineering specifications for potential future monolithic or segmented space telescopes based on science needs and implement constraints. And we are maturing six inter-linked critical technologies to enable potential future large aperture UVOIR space telescope: 1) Large-Aperture, Low Areal Density, High Stiffness Mirrors, 2) Support Systems, 3) Mid/High Spatial Frequency Figure Error, 4) Segment Edges, 5) Segment-to-Segment Gap Phasing, and 6) Integrated Model Validation Science Advisory Team and a Systems Engineering Team. We are maturing all six technologies simultaneously because all are required to make a primary mirror assembly (PMA); and, it is the PMA’s on-orbit performance which determines science return. PMA stiffness depends on substrate and support stiffness. Ability to cost-effectively eliminate mid/high spatial figure errors and polishing edges depends on substrate stiffness. On-orbit thermal and mechanical performance depends on substrate stiffness, the coefficient of thermal expansion (CTE) and thermal mass. And, segment-to-segment phasing depends on substrate & structure stiffness

  10. Development of the University of Delaware Experimental Watershed Project

    NASA Astrophysics Data System (ADS)

    Campagnini, J. L.; Kauffman, G. J.; Corrozi, M.; Bower, J.

    2001-05-01

    In 2000, a team of University of Delaware undergraduate and graduate students developed the University of Delaware Experimental Watershed Project with a grant from the Delaware Water Resources Center. The University of Delaware (UD) is a land- and sea-grant institution in Newark, Delaware and is perched along the Atlantic seaboard's fall line. A critical mass of UD faculty and students in water resources and related disciplines are interested in the development of an experimental watershed on campus to provide (1) interdisciplinary undergraduate, graduate and faculty research opportunities, and (2) an outdoor education laboratory. Using GIS and field reconnaissance techniques, the three students delineated two small experimental watershed regions respectively located in the Piedmont and Coastal Plain provinces of the White Clay Creek Wild and Scenic River Valley on the UD campus. The Piedmont watershed drains 416 acres of the northern area of campus while the Coastal Plain watershed drains 896 acres including the central and southern sections of campus. The students then developed an ArcView GIS atlas integrating geology, soils, topography, land use, and impervious cover layers with a rating system for water quality and habitat characteristics to issue a "report-card" assessing each watershed's overall health. The White Clay Creek Wild and Scenic River Valley is an ideal on campus location for an outdoor education and research laboratory because of its manageable scale, the diversity of its characteristic land uses and physical environment, and above all its accessibility for students, faculty, researchers, and the public.

  11. Program Evaluation - Automotive Lightweighting Materials Program Research and Development Projects Assessment of Benefits - Case Studies No. 2

    SciTech Connect

    Das, S.

    2003-01-23

    This report is the second of a series of studies to evaluate research and development (R&D) projects funded by the Automotive Lightweighting Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). The objectives of the program evaluation are to assess short-run outputs and long-run outcomes that may be attributable to the ALM R&D projects. The ALM program focuses on the development and validation of advanced technologies that significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. Funded projects range from fundamental materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers. Three ALM R&D projects were chosen for this evaluation: Design and Product Optimization for Cast Light Metals, Durability of Lightweight Composite Structures, and Rapid Tooling for Functional Prototyping of Metal Mold Processes. These projects were chosen because they have already been completed. The first project resulted in development of a comprehensive cast light metal property database, an automotive application design guide, computerized predictive models, process monitoring sensors, and quality assurance methods. The second project, the durability of lightweight composite structures, produced durability-based design criteria documents, predictive models for creep deformation, and minimum test requirements and suggested test methods for establishing durability properties and characteristics of random glass-fiber composites for automotive structural composites. The durability project supported Focal Project II, a validation activity that demonstrates ALM program goals and reduces the lead time for bringing new technology into the marketplace. Focal

  12. Development of a valve-regulated lead/acid battery for automotive use

    NASA Astrophysics Data System (ADS)

    Calasanzio, D.; Cecchinato, G.; Marchetto, M.

    The use of valve-regulated lead/acid batteries (VRLA) in automotive applications provides some important advantages with respect to traditional flooded designs. Difficulties are reported for flooded lead/acid batteries that use PbCa alloys in the positive grids with respect to recovery of capacity after deep discharge. This problem is no longer valid for recombinant batteries using absortive glass-mat (AGM) separators. Further, this truly maintenance-free battery can be installed in any position, even outside the engine compartment, because of the absence of gas emission or electrolyte spillage. The shelf life is very long and the battery can be stored at open circuit for 12 months with no significant loss of performance. The cold-cranking capacity is higher than the equivalent conventional lead/acid battery due to the reduced internal resistance.

  13. The management and design of economic development projects: A case study of World Bank electricity projects in Egypt

    SciTech Connect

    El Sabaa, S.M.

    1992-01-01

    This study is concerned with the efficiency of World Bank projects in Egypt. The study seeks improvements in the methods of evaluating public sector projects in Egypt. To approaches are employed: (1) project identification to optimally allocate Egypt's and World Bank's resources; (2) project appraisal to assess the economic viability and efficiency of investments. The electricity sector is compared with the agriculture sector as a means of employing project identification for priority ordering of investment for development in Egypt. The key criteria for evaluation are the impacts of developments of each sector upon Egypt's national objectives and needs. These include employment opportunities, growth, alleviation of poverty, cross comparison of per capita consumption in each sector, economic rate of return, national security, balance of payments and foreign debt. The allocation of scarce investments would have been more efficient in agriculture than in electricity in meeting Egypt's national objectives and needs. World Bank lending programs in Egypt reveal a priority ordering of electricity over agriculture and rural development. World Bank development projects in Egypt have not been optimally identified, and its programs have not followed an efficient allocation of World Bank's and Egypt's resources. The key parameters in evaluating economic viability and efficiency of development projects are: (1) the discount rate (the opportunity cost of public funds); (2) the exchange rate; and (3) the cost of major inputs, as approximated by shadow prices of labor, water, electricity, and transportation for development projects. Alternative approaches to estimating the opportunity cost of public funds are made. The parameters in evaluating the efficiency of projects have not been accurately estimated in the appraisal stage of the World Bank projects in Egypt, resulting in false or misleading information concerning the economic viability and efficiency of the projects.

  14. Development of Lead Free Energy Absorber for Space Shuttle Blast Container

    NASA Technical Reports Server (NTRS)

    Balles, Donald; Ingram, Thomas; Novak, Howard; Schricker, Albert

    1998-01-01

    The Space Shuttle is connected to the mobile launch platform (MLP) by four aft skirt hold down studs on each solid rocket booster (SRB). Prior to lift-off, the frangible nuts inside the aft skirt blast containers are severed into two nut halves by two pyrotechnic booster cartridges. This action releases the Space Shuttle and allows the hold down studs to eject through the aft skirt bore and then down into the MLP. USBI has been tasked to upgrade the blast container for two specific reasons: (1) To eliminate lead for environmental concerns, and (2) To reduce the chance of nut recontact with the holddown stud. Nut recontact with the stud has been identified as a likely contributor to stud hang-ups. This upgrade will replace the lead liner with a unique open cell aluminum foam material, that has commercial and military uses. The aluminum foam used as an energy absorber is a proven design in many other aerospace/defense applications. Additional benefits of using the open cell, energy absorbent aluminum foam in place of the solid lead liner are: (A) Lead handling/exposure and possible contamination, along with hazardous waste disposal, will be eliminated; (B) Approximately 200 lbs. weight savings will be contributed to each Space Shuttle flight by using aluminum foam instead of lead; (C) The new aluminum liner is designed to catch all shrapnel from frangible nuts, thus virtually eliminating chance of debris exiting the HDP and causing potential damage to the vehicle; and (D) Using the lighter aluminum liner instead of lead, allows for easier assembly and disassembly of blast container elements, which also improves safety, operator handling, and the efficiency of operations.

  15. Development of Lead Free Energy Absorber for Space Shuttle Blast Container

    NASA Technical Reports Server (NTRS)

    Balles, Donald; Ingram, Thomas; Novak, Howard; Schricker, Albert

    1999-01-01

    The Space Shuttle is connected to the mobile launch platform (MLP) by four aft skirt hold down studs on each solid rocket booster (SRB). Prior to lift-off, the frangible nuts inside the aft skirt blast containers are severed into two nut halves by two pyrotechnic booster cartridges. This action releases the Space Shuttle and allows the hold down studs to eject through the aft skirt bore and then down into the MLP. USBI has been tasked to upgrade the blast container for two specific reasons: (1) To eliminate lead for environmental concerns, and (2) To reduce the chance of nut recontact with the holddown stud. Nut recontact with the stud has been identified as a likely contributor to stud hang-ups. This upgrade will replace the lead liner with a unique open cell aluminum foam material, that has commercial and military uses. The aluminum foam used as an energy absorber is a proven design in many other aerospace/defense applications. Additional benefits of using the open cell, energy absorbent aluminum foam in place of the solid lead liner are: (1) Lead handling / exposure and possible contamination, along with hazardous waste disposal, will be eliminated; (2) Approximately 200 lbs. weight savings will be contributed to each Space Shuttle flight by using aluminum foam instead of lead; (3) The new aluminum liner is designed to catch all shrapnel from frangible nuts, thus virtually eliminating chance of debris exiting the HDP and causing potential damage to the vehicle; (4) Using the lighter aluminum liner instead of lead, allows for easier assembly and disassembly of blast container elements, which also improves safety, operator handling, and the efficiency of operations.

  16. Development of Lead Free Energy Absorber for Space Shuttle Blast Container

    NASA Technical Reports Server (NTRS)

    Ingram, T.; Balles, D.; Schricker, A.; Novak, H.

    1998-01-01

    The Space Shuttle vehicle (SSV) is connected to the mobile launch platform (MLP) by four aft skirt hold down studs on each solid rocket booster (SRB). Prior to lift-off, the frangible nuts inside the aft skirt blast containers (BC) are severed into two nut halves by two pyrotechnic booster cartridges. This action releases the SSV and allows the hold down studs to eject through the aft skirt bore and then down into the MLP. USBI has been tasked to upgrade the BC for two specific reasons; 1. to eliminate lead for environmental concerns, and 2. to reduce the chance of nut recontact with the holddown stud. Nut recontact with the stud has been identified as a likely contributor to stud hangups. This upgrade will replace the lead liner with an aluminum foam material. The aluminum foam used as a energy absorber is a proven design in many other aerospace/defense applications. Additional benefits of using the open cell, energy absorbent aluminum foam in place of the solid lead liner are: A. Lead handling/ exposure, and possible contamination, along with hazardous waste disposal will be eliminated; B. Approximately 200 lbs. weight savings will be contributed to each Space Shuttle flight by using aluminum foam over lead; C. The new aluminum liner is designed to catch all shrapnel from frangible nuts thus virtually eliminating chance of foreign object debris (FOD) exiting the HDP, and causing potential damage to the vehicle; D. Potential of using the lighter aluminum liner over lead, allows for easier assembly and disassembly of blast container elements, also allowing for improvements in safety, operator handling, and efficiency of operations. Six BC firing tests will be required to determine if the new liner material will perform in a way to decrease the chance of stud hangups and enhance the ability of the BC to retain blast debris. Testing will be performed at the Kennedy Space Center (KSC) facility known as the Launch Equipment Test Facility (LETF), and will simulate the

  17. Development flight tests of JetStar LFC leading-edge flight test experiment

    NASA Technical Reports Server (NTRS)

    Fisher, David F.; Fischer, Michael C.

    1987-01-01

    The overall objective of the flight tests on the JetStar aircraft was to demonstrate the effectiveness and reliability of laminar flow control under representative flight conditions. One specific objective was to obtain laminar flow on the JetStar leading-edge test articles for the design and off-design conditions. Another specific objective was to obtain operational experience on a Laminar Flow Control (LFC) leading-edge system in a simulated airline service. This included operational experience with cleaning requirements, the effect of clogging, possible foreign object damage, erosion, and the effects of ice particle and cloud encounters. Results are summarized.

  18. Theorizing the relationship between NGOs and the state in medical humanitarian development projects.

    PubMed

    Asad, Asad L; Kay, Tamara

    2014-11-01

    Social scientists have fiercely debated the relationship between non-governmental organizations (NGOs) and the state in NGO-led development projects. However, this research often carries an implicit, and often explicit, anti-state bias, suggesting that when NGOs collaborate with states, they cease to be a progressive force. This literature thus fails to recognize the state as a complex, heterogeneous, and fragmented entity. In particular, the unique political context within which an NGO operates is likely to influence how it carries out its work. In this article, we ask: how do NGOs work and build relationships with different types of states and--of particular relevance to practitioners--what kinds of relationship building lead to more successful development outcomes on the ground? Drawing on 29 in-depth interviews with members of Partners in Health and Oxfam America conducted between September 2010 and February 2014, we argue that NGOs and their medical humanitarian projects are more likely to succeed when they adjust how they interact with different types of states through processes of interest harmonization and negotiation. We offer a theoretical model for understanding how these processes occur across organizational fields. Specifically, we utilize field overlap theory to illuminate how successful outcomes depend on NGOs' ability to leverage resources--alliances and networks; political, financial, and cultural resources; and frames--across state and non-state fields. By identifying how NGOs can increase the likelihood of project success, our research should be of interest to activists, practitioners, and scholars. PMID:24852816

  19. Analysis of School Projects for the Development of Project Information Packages (PIPs).

    ERIC Educational Resources Information Center

    Horst, Donald P.

    Six compensatory education projects, all of which were effective, are analyzed. The purpose of the Project Information Packages (PIPs) mandated by the United States Office of Education (USOE) was to determine whether compensatory projects could be packaged with sufficient clarity and in sufficient detail to encourage and enable their replication…

  20. Space shuttle wing leading edge heating environment prediction derived from development flight data

    NASA Technical Reports Server (NTRS)

    Cunningham, J. A.; Haney, J. W., Jr.

    1983-01-01

    An analytical program is in progress at Rockwell International to revise wing leading edge heating predictions in order to improve correlation with STS-1 to -5 flight radiometer data. This paper discusses the methods that have been used to improve agreement between prediction and flight and summarizes the aerodynamic correlations which, when updated, will be used to analyze future orbiter missions.