Hot-Fire Test Results of Liquid Oxygen/RP-2 Multi-Element Oxidizer-Rich Preburners

NASA Technical Reports Server (NTRS)

Protz, C. S.; Garcia, C. P.; Casiano, M. J.; Parton, J. A.; Hulka, J. R.

2016-01-01

As part of the Combustion Stability Tool Development project funded by the Air Force Space and Missile Systems Center, the NASA Marshall Space Flight Center was contracted to assemble and hot-fire test a multi-element integrated test article demonstrating combustion characteristics of an oxygen/hydrocarbon propellant oxidizer-rich staged-combustion engine thrust chamber. Such a test article simulates flow through the main injectors of oxygen/kerosene oxidizer-rich staged combustion engines such as the Russian RD-180 or NK-33 engines, or future U.S.-built engine systems such as the Aerojet-Rocketdyne AR-1 engine or the Hydrocarbon Boost program demonstration engine. To supply the oxidizer-rich combustion products to the main injector of the integrated test article, existing subscale preburner injectors from a previous NASA-funded oxidizer-rich staged combustion engine development program were utilized. For the integrated test article, existing and newly designed and fabricated inter-connecting hot gas duct hardware were used to supply the oxidizer-rich combustion products to the oxidizer circuit of the main injector of the thrust chamber. However, before one of the preburners was used in the integrated test article, it was first hot-fire tested at length to prove it could provide the hot exhaust gas mean temperature, thermal uniformity and combustion stability necessary to perform in the integrated test article experiment. This paper presents results from hot-fire testing of several preburner injectors in a representative combustion chamber with a sonic throat. Hydraulic, combustion performance, exhaust gas thermal uniformity, and combustion stability data are presented. Results from combustion stability modeling of these test results are described in a companion paper at this JANNAF conference, while hot-fire test results of the preburner injector in the integrated test article are described in another companion paper.

Mobile Distance Learning with PDAs: Development and Testing of Pedagogical and System Solutions Supporting Mobile Distance Learners

ERIC Educational Resources Information Center

Rekkedal, Torstein; Dye, Aleksander

2007-01-01

The article discusses basic teaching-learning philosophies and experiences from the development and testing of mobile learning integrated with the online distance education system at NKI (Norwegian Knowledge Institute) Distance Education. The article builds on experiences from three European Union (EU) supported "Leonardo da Vinci"…

Industry's View on Using Quality Control, Biorelevant, and Clinically Relevant Dissolution Tests for Pharmaceutical Development, Registration, and Commercialization.

PubMed

Grady, Haiyan; Elder, David; Webster, Gregory K; Mao, Yun; Lin, Yiqing; Flanagan, Talia; Mann, James; Blanchard, Andy; Cohen, Michael J; Lin, Judy; Kesisoglou, Filippos; Hermans, Andre; Abend, Andreas; Zhang, Limin; Curran, David

2018-01-01

This article intends to summarize the current views of the IQ Consortium Dissolution Working Group, which comprises various industry companies, on the roles of dissolution testing throughout pharmaceutical product development, registration, commercialization, and beyond. Over the past 3 decades, dissolution testing has evolved from a routine and straightforward test as a component of end-product release into a comprehensive set of tools that the developer can deploy at various stages of the product life cycle. The definitions of commonly used dissolution approaches, how they relate to one another and how they may be applied in modern drug development, and life cycle management is described in this article. Specifically, this article discusses the purpose, advantages, and limitations of quality control, biorelevant, and clinically relevant dissolution methods. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Middeck Active Control Experiment (MACE), phase A

NASA Technical Reports Server (NTRS)

Crawley, Edward F.; Deluis, Javier; Miller, David W.

1989-01-01

A rationale to determine which structural experiments are sufficient to verify the design of structures employing Controlled Structures Technology was derived. A survey of proposed NASA missions was undertaken to identify candidate test articles for use in the Middeck Active Control Experiment (MACE). The survey revealed that potential test articles could be classified into one of three roles: development, demonstration, and qualification, depending on the maturity of the technology and the mission the structure must fulfill. A set of criteria was derived that allowed determination of which role a potential test article must fulfill. A review of the capabilities and limitations of the STS middeck was conducted. A reference design for the MACE test article was presented. Computing requirements for running typical closed-loop controllers was determined, and various computer configurations were studied. The various components required to manufacture the structure were identified. A management plan was established for the remainder of the program experiment development, flight and ground systems development, and integration to the carrier. Procedures for configuration control, fiscal control, and safety, reliabilty, and quality assurance were developed.

Robotic Lunar Lander Development Status

NASA Technical Reports Server (NTRS)

Ballard, Benjamin; Cohen, Barbara A.; McGee, Timothy; Reed, Cheryl

2012-01-01

NASA Marshall Space Flight Center and John Hopkins University Applied Physics Laboratory have developed several mission concepts to place scientific and exploration payloads ranging from 10 kg to more than 200 kg on the surface of the moon. The mission concepts all use a small versatile lander that is capable of precision landing. The results to date of the lunar lander development risk reduction activities including high pressure propulsion system testing, structure and mechanism development and testing, and long cycle time battery testing will be addressed. The most visible elements of the risk reduction program are two fully autonomous lander flight test vehicles. The first utilized a high pressure cold gas system (Cold Gas Test Article) with limited flight durations while the subsequent test vehicle, known as the Warm Gas Test Article, utilizes hydrogen peroxide propellant resulting in significantly longer flight times and the ability to more fully exercise flight sensors and algorithms. The development of the Warm Gas Test Article is a system demonstration and was designed with similarity to an actual lunar lander including energy absorbing landing legs, pulsing thrusters, and flight-like software implementation. A set of outdoor flight tests to demonstrate the initial objectives of the WGTA program was completed in Nov. 2011, and will be discussed.

NASA's Robotic Lunar Lander Development Program

NASA Technical Reports Server (NTRS)

Ballard, Benjamin W.; Reed, Cheryl L. B.; Artis, David; Cole, Tim; Eng, Doug S.; Kubota, Sanae; Lafferty, Paul; McGee, Timothy; Morese, Brian J.; Chavers, Gregory;

LFC leading edge glove flight: Aircraft modification design, test article development and systems integration

NASA Technical Reports Server (NTRS)

Etchberger, F. R.

1983-01-01

Reduction of skin friction drag by suction of boundary layer air to maintain laminar flow has been known since Prandtl's published work in 1904. The dramatic increases in fuel costs and the potential for periods of limited fuel availability provided the impetus to explore technologies to reduce transport aircraft fuel consumption. NASA sponsored the Aircraft Energy Efficiency (ACEE) program in 1976 to develop technologies to improve fuel efficiency. This report documents the Lockheed-Georgia Company accomplishments in designing and fabricating a leading-edge flight test article incorporating boundary layer suction slots to be flown by NASA on their modified JetStar aircraft. Lockheed-Georgia Company performed as the integration contractor to design the JetStar aircraft modification to accept both a Lockheed and a McDonnell Douglas flight test article. McDonnell Douglas uses a porous skin concept. The report describes aerodynamic analyses, fabrication techniques, JetStar modifications, instrumentation requirements, and structural analyses and testing for the Lockheed test article. NASA will flight test the two LFC leading-edge test articles in a simulated commercial environment over a 6 to 8 month period in 1984. The objective of the flight test program is to evaluate the effectiveness of LFC leading-edge systems in reducing skin friction drag and consequently improving fuel efficiency.

Development and Overview of CPAS Sasquatch Airdrop Landing Location Predictor Software

NASA Technical Reports Server (NTRS)

Bledsoe, Kristin J.; Bernatovich, Michael A.

2015-01-01

The Capsule Parachute Assembly System (CPAS) is the parachute system for NASA's Orion spacecraft. CPAS is currently in the Engineering Development Unit (EDU) phase of testing. The test program consists of numerous drop tests, wherein a test article rigged with parachutes is extracted from an aircraft. During such tests, range safety is paramount, as is the recoverability of the parachutes and test article. It is crucial to establish a release point from the aircraft that will ensure that the article and all items released from it during flight will land in a designated safe area. The Sasquatch footprint tool was developed to determine this safe release point and to predict the probable landing locations (footprints) of the payload and all released objects. In 2012, a new version of Sasquatch, called Sasquatch Polygons, was developed that significantly upgraded the capabilities of the footprint tool. Key improvements were an increase in the accuracy of the predictions, and the addition of an interface with the Debris Tool (DT), an in-flight debris avoidance tool for use on the test observation helicopter. Additional enhancements include improved data presentation for communication with test personnel and a streamlined code structure. This paper discusses the development, validation, and performance of Sasquatch Polygons, as well as its differences from the original Sasquatch footprint tool.

Manned remote work station development article, executive summary

NASA Technical Reports Server (NTRS)

1979-01-01

The mission requirements for the manned remote work station (MRWS) flight article and the manned remote work station open cherry picker development test article is defined. Considerations are given for the near, mid, and far term use of the MRWS with emphasis on its ultimate application: constructing the Solar Power Satellite.

Design of 8-ft-Diameter Barrel Test Article Attachment Rings for Shell Buckling Knockdown Factor Project

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.; Hilburger, Mark W.

2010-01-01

The Shell Buckling Knockdown Factor (SBKF) project includes the testing of sub-scale cylinders to validate new shell buckling knockdown factors for use in the design of the Ares-I and Ares-V launch vehicles. Test article cylinders represent various barrel segments of the Ares-I and Ares-V vehicles, and also include checkout test articles. Testing will be conducted at Marshall Space Flight Center (MSFC) for test articles having an eight-foot diameter outer mold line (OML) and having lengths that range from three to ten feet long. Both ends of the test articles will be connected to the test apparatus using attachment rings. Three multiple-piece and one single-piece design for the attachment rings were developed and analyzed. The single-piece design was chosen and will be fabricated from either steel or aluminum (Al) depending on the required safety factors (SF) for test hardware. This report summarizes the design and analysis of these attachment ring concepts.

Liquid oxygen (LO2) propellant conditioning concept testing

NASA Technical Reports Server (NTRS)

Perry, Gretchen L. E.; Orth, Michael S.; Mehta, Gopal K.

1993-01-01

Testing of a simplified LO2 propellant conditioning concept for future expendable launch vehicles is discussed. Four different concepts are being investigated: no-bleed, low-bleed, use of a recirculation line, and He bubbling. A full-scale test article, which is a facsimile of a propellant feed duct with an attached section to simulate heat input from an LO2 turbopump, is to be tested at the Cold Flow Facility of the Marshall Space Flight Center West Test Area. Work to date includes: design and fabrication of the test article, design of the test facility and initial fabrication, development of a test matrix and test procedures, initial predictions of test output, and heat leak calibration and heat exchanger tests on the test articles.

[E-learning with journal articles].

PubMed

Adriaanse, Marcel T; van Eijsden, Pieter; de Leeuw, Peter W

2014-01-01

E-learning is a popular method of continuous medical education (CME) which is becoming increasingly available to doctors. A specific form of E-learning is an online knowledge test accompanying a journal article. CME accreditation points can be obtained by reading an article and then answering test questions on it. This is a user-friendly form of CME which an increasing number of journals are offering as a service to their readers. The Dutch Journal of Medicine (NTvG) has been offering accredited tests to its readers since 2011. On comparison with international journals, a high standard has been set by the development of a test concept in which interpretation and reflection play integral roles. In the Dutch setting, the concept of the test was developed by professional bodies working closely together and it is a concept that is used as an example to other journals.

Design development of graphite primary structures enables SSTO success

NASA Astrophysics Data System (ADS)

Biagiotti, V. A.; Yahiro, J. S.; Suh, Daniel E.; Hodges, Eric R.; Prior, Donald J.

1997-01-01

This paper describes the development of a graphite composite wing and a graphite composite intertank primary structure for application toward Single-Stage to Orbit space vehicles such as those under development in NASA's X-33/Reusable Launch Vehicle (RLV) Program. The trade study and designs are based on a Rockwell vertical take-off and horizontal landing (VTHL) wing-body RLV vehicle. Northrop Grumman's approach using a building block development technique is described. Composite Graphite/Bismaleimide (Gr/BMI) material characterization test results are presented. Unique intertank and wing composite subcomponent test article designs are described and test results to date are presented. Wing and intertank Full Scale Section Test Article (FSTA) objectives and designs are outlined. Trade studies, supporting building block testing, and FSTA demonstrations combine to develop graphite primary structure composite technology that enables developing X-33/RLV design programs to meet critical SSTO structural weight and operations performance criteria.

Solar dynamic heat rejection technology. Task 2: Heat pipe radiator development

NASA Technical Reports Server (NTRS)

League, Mark; Alario, Joe

1988-01-01

This report covers the design, fabrication, and test of several dual slot heat pipe engineering development units. The following dual-slot heat pipes were fabricated and tested: two 6-ft. aluminum heat pipes; a 20-ft. aluminum heat pipe; and a 20-ft. aluminum heat pipe with a four-leg evaporator section. The test results of all four test articles are presented and compared to the performance predicted by the design software. Test results from the four-leg article are incomplete. The methodology for fabricating stainless steel dual slot heat pipes was also studied by performing a tool life test with different single point cutters, and these results are also presented. Although the dual-slot heat pipe has demonstrated the potential to meet the requirements for a high capacity radiator system, uncertainties with the design still exist. The startup difficulties with the aluminum test articles must be solved, and a stainless steel/methanol heat pipe should be built and tested.

Advanced Stirling Radioisotope Generator Engineering Unit 2 (ASRG EU2) Final Assembly

NASA Technical Reports Server (NTRS)

Oriti, Salvatore M.

2015-01-01

NASA Glenn Research Center (GRC) has recently completed the assembly of a unique Stirling generator test article for laboratory experimentation. Under the Advanced Stirling Radioisotope Generator (ASRG) flight development contract, NASA GRC initiated a task to design and fabricate a flight-like generator for in-house testing. This test article was given the name ASRG Engineering Unit 2 (EU2) as it was effectively the second engineering unit to be built within the ASRG project. The intent of the test article was to duplicate Lockheed Martin's qualification unit ASRG design as much as possible to enable system-level tests not previously possible at GRC. After the cancellation of the ASRG flight development project, the decision was made to continue the EU2 build, and make use of a portion of the hardware from the flight development project. GRC and Lockheed Martin engineers collaborated to develop assembly procedures, leveraging the valuable knowledge gathered by Lockheed Martin during the ASRG development contract. The ASRG EU2 was then assembled per these procedures at GRC with Lockheed Martin engineers on site. The assembly was completed in August 2014. This paper details the components that were used for the assembly, and the assembly process itself.

Psychometric evaluation of commonly used game-specific skills tests in rugby: A systematic review

PubMed Central

Oorschot, Sander; Chiwaridzo, Matthew; CM Smits-Engelsman, Bouwien

2017-01-01

Objectives To (1) give an overview of commonly used game-specific skills tests in rugby and (2) evaluate available psychometric information of these tests. Methods The databases PubMed, MEDLINE CINAHL and Africa Wide information were systematically searched for articles published between January 1995 and March 2017. First, commonly used game-specific skills tests were identified. Second, the available psychometrics of these tests were evaluated and the methodological quality of the studies assessed using the Consensus-based Standards for the selection of health Measurement Instruments checklist. Studies included in the first step had to report detailed information on the construct and testing procedure of at least one game-specific skill, and studies included in the second step had additionally to report at least one psychometric property evaluating reliability, validity or responsiveness. Results 287 articles were identified in the first step, of which 30 articles met the inclusion criteria and 64 articles were identified in the second step of which 10 articles were included. Reactive agility, tackling and simulated rugby games were the most commonly used tests. All 10 studies reporting psychometrics reported reliability outcomes, revealing mainly strong evidence. However, all studies scored poor or fair on methodological quality. Four studies reported validity outcomes in which mainly moderate evidence was indicated, but all articles had fair methodological quality. Conclusion Game-specific skills tests indicated mainly high reliability and validity evidence, but the studies lacked methodological quality. Reactive agility seems to be a promising domain, but the specific tests need further development. Future high methodological quality studies are required in order to develop valid and reliable test batteries for rugby talent identification. Trial registration number PROSPERO CRD42015029747. PMID:29259812

A Maturing Global Testing Regime Meets the World Economy: Test Scores and Economic Growth, 1960-2012

ERIC Educational Resources Information Center

Kamens, David H.

2015-01-01

This article considers the growth of the international testing regime. It discusses sources of growth and empirically examines two related sets of issues: (1) the stability of countries' achievement scores, and (2) the influence of those national scores on subsequent economic development over different time lags. The article suggests that…

Aircraft components structural health monitoring using flexible ultrasonic transducer arrays

NASA Astrophysics Data System (ADS)

Liu, W.-L.; Jen, C.-K.; Kobayashi, M.; Mrad, N.

2011-04-01

A damage detection capability based on a flexible ultrasonic transducer (FUT) array bonded onto a planar and a curved surface is presented. The FUT array was fabricated on a 75 μm titanium substrate using sol-gel spray technique. Room temperature curable adhesive is used as the bonding agent and ultrasonic couplant between the transducer and the test article. The bonding agent was successfully tested for aircraft environmental temperatures between -80 °C and 100 °C. For a planar test article, selected FUT arrays were able to detect fasteners damage within a planar distance of 176 mm, when used in the pulse-echo mode. Such results illustrate the effectiveness of the developed FUT transducer as compared to commercial 10MHz ultrasonic transducer (UT). These FUT arrays were further demonstrated on a curved test article. Pulse-echo measurements confirmed the reflected echoes from the specimen. Such measurement was not possible with commercial UTs due to the curved nature of the test article and its accessibility, thus demonstrating the suitability and superiority of the developed flexible ultrasonic transducer capability.

Transcription and the IELTS Speaking Test: Facilitating Development

ERIC Educational Resources Information Center

Stones, Thomas P.

2013-01-01

This article describes a transcription task cycle that was designed to facilitate the development of skills for the IELTS (International English Language Testing System) speaking test at a language school in Japan. The cycle involved practice test, transcription, student correction, teacher correction, and retrial of the original test and…

Cryogenic Fluid Film Bearing Tester Development Study

NASA Technical Reports Server (NTRS)

Scharrer, Joseph K. (Editor); Murphy, Brian T.; Hawkins, Lawrence A.

1993-01-01

Conceptual designs were developed for the determination of rotordynamic coefficients of cryogenic fluid film bearings. The designs encompassed the use of magnetic and conventional excitation sources as well as the use of magnetic bearings as support bearings. Test article configurations reviewed included overhung, floating housing, and fixed housing. Uncertainty and forced response analyses were performed to assess quality of data and suitability of each for testing a variety of fluid film bearing designs. Development cost and schedule estimates were developed for each design. Facility requirements were reviewed and compared with existing MSFC capability. The recommended configuration consisted of a fixed test article housing centrally located between two magnetic bearings. The magnetic bearings would also serve as the excitation source.

Dialysis search filters for PubMed, Ovid MEDLINE, and Embase databases.

PubMed

Iansavichus, Arthur V; Haynes, R Brian; Lee, Christopher W C; Wilczynski, Nancy L; McKibbon, Ann; Shariff, Salimah Z; Blake, Peter G; Lindsay, Robert M; Garg, Amit X

2012-10-01

Physicians frequently search bibliographic databases, such as MEDLINE via PubMed, for best evidence for patient care. The objective of this study was to develop and test search filters to help physicians efficiently retrieve literature related to dialysis (hemodialysis or peritoneal dialysis) from all other articles indexed in PubMed, Ovid MEDLINE, and Embase. A diagnostic test assessment framework was used to develop and test robust dialysis filters. The reference standard was a manual review of the full texts of 22,992 articles from 39 journals to determine whether each article contained dialysis information. Next, 1,623,728 unique search filters were developed, and their ability to retrieve relevant articles was evaluated. The high-performance dialysis filters consisted of up to 65 search terms in combination. These terms included the words "dialy" (truncated), "uremic," "catheters," and "renal transplant wait list." These filters reached peak sensitivities of 98.6% and specificities of 98.5%. The filters' performance remained robust in an independent validation subset of articles. These empirically derived and validated high-performance search filters should enable physicians to effectively retrieve dialysis information from PubMed, Ovid MEDLINE, and Embase.

Development of a Moldable, Biodegradable Polymeric Bone Repair Material

DTIC Science & Technology

1994-03-30

minimally encapsulated by fibrous tissue. Histomorphometric analysis of day 14 specimens showed a very mild foreign body response in terms of area. This...significant visual evidence of foreign body response seen for any Atrix test article. A mass of dense fibrotic tissue was found near the defect site...article in the defect and medullary cavity. The test article was minimally encapsulated by fibrotic tissue. Histomorphometric analysis showed this

Waterhammer Modeling for the Ares I Upper Stage Reaction Control System Cold Flow Development Test Article

NASA Technical Reports Server (NTRS)

Williams, Jonathan H.

2010-01-01

The Upper Stage Reaction Control System provides three-axis attitude control for the Ares I launch vehicle during active Upper Stage flight. The system design must accommodate rapid thruster firing to maintain the proper launch trajectory and thus allow for the possibility to pulse multiple thrusters simultaneously. Rapid thruster valve closure creates an increase in static pressure, known as waterhammer, which propagates throughout the propellant system at pressures exceeding nominal design values. A series of development tests conducted in the fall of 2009 at Marshall Space Flight Center were performed using a water-flow test article to better understand fluid performance characteristics of the Upper Stage Reaction Control System. A subset of the tests examined waterhammer along with the subsequent pressure and frequency response in the flight-representative system and provided data to anchor numerical models. This thesis presents a comparison of waterhammer test results with numerical model and analytical results. An overview of the flight system, test article, modeling and analysis are also provided.

Test Cases for Modeling and Validation of Structures with Piezoelectric Actuators

NASA Technical Reports Server (NTRS)

Reaves, Mercedes C.; Horta, Lucas G.

2001-01-01

A set of benchmark test articles were developed to validate techniques for modeling structures containing piezoelectric actuators using commercially available finite element analysis packages. The paper presents the development, modeling, and testing of two structures: an aluminum plate with surface mounted patch actuators and a composite box beam with surface mounted actuators. Three approaches for modeling structures containing piezoelectric actuators using the commercially available packages: MSC/NASTRAN and ANSYS are presented. The approaches, applications, and limitations are discussed. Data for both test articles are compared in terms of frequency response functions from deflection and strain data to input voltage to the actuator. Frequency response function results using the three different analysis approaches provided comparable test/analysis results. It is shown that global versus local behavior of the analytical model and test article must be considered when comparing different approaches. Also, improper bonding of actuators greatly reduces the electrical to mechanical effectiveness of the actuators producing anti-resonance errors.

Waterhammer modeling for the Ares I Upper Stage Reaction Control System cold flow development test article

NASA Astrophysics Data System (ADS)

Williams, Jonathan Hunter

The Upper Stage Reaction Control System provides in-flight three-axis attitude control for the Ares I Upper Stage. The system design must accommodate rapid thruster firing to maintain proper launch trajectory and thus allow for the possibility to pulse multiple thrusters simultaneously. Rapid thruster valve closure creates an increase in static pressure, known as waterhammer, which propagates throughout the propellant system at pressures exceeding nominal design values. A series of development tests conducted at Marshall Space Flight Center in 2009 were performed using a water-flow test article to better understand fluid characteristics of the Upper Stage Reaction Control System. A subset of the tests examined the waterhammer pressure and frequency response in the flight-representative system and provided data to anchor numerical models. This thesis presents a comparison of waterhammer test results with numerical model and analytical results. An overview of the flight system, test article, modeling and analysis are also provided.

Critical Thinking: More than Test Scores

ERIC Educational Resources Information Center

Smith, Vernon G.; Szymanski, Antonia

2013-01-01

This article is for practicing or aspiring school administrators. The demand for excellence in public education has lead to an emphasis on standardized test scores. This article explores the development of a professional enhancement program designed to prepare teachers to teach higher order thinking skills. Higher order thinking is the primary…

Design development of graphite primary structures enables SSTO success

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biagiotti, V.A.; Yahiro, J.S.; Suh, D.E.

1997-01-01

This paper describes the development of a graphite composite wing and a graphite composite intertank primary structure for application toward Single-Stage to Orbit space vehicles such as those under development in NASA{close_quote}s X-33/Reusable Launch Vehicle (RLV) Program. The trade study and designs are based on a Rockwell vertical take-off and horizontal landing (VTHL) wing-body RLV vehicle. Northrop Grumman{close_quote}s approach using a building block development technique is described. Composite Graphite/Bismaleimide (Gr/BMI) material characterization test results are presented. Unique intertank and wing composite subcomponent test article designs are described and test results to date are presented. Wing and intertank Full Scale Sectionmore » Test Article (FSTA) objectives and designs are outlined. Trade studies, supporting building block testing, and FSTA demonstrations combine to develop graphite primary structure composite technology that enables developing X-33/RLV design programs to meet critical SSTO structural weight and operations performance criteria. {copyright} {ital 1997 American Institute of Physics.}« less

2009 Continued Testing of the Orion Atmosphere Revitalization Technology

NASA Technical Reports Server (NTRS)

Button, Amy B.; Swerterlitsch, Jeffrey J.

2010-01-01

An amine-based carbon dioxide (CO2) and water vapor sorbent in pressure-swing regenerable beds has been developed by Hamilton Sundstrand and baselined for the Orion Atmosphere Revitalization System (ARS). In three previous years at this conference, reports were presented on extensive Johnson Space Center (JSC) testing of this technology in a sea-level pressure environment, with simulated and real human metabolic loads, in both open and closed-loop configurations. The test article design was iterated a third time before the latest series of such tests, which was performed in the first half of 2009. The new design incorporates a canister configuration modification for overall unit compactness and reduced pressure drop, as well as a new process flow control valve that incorporates both compressed gas purge and dual-end vacuum desorption capabilities. This newest test article is very similar to the flight article designs. Baseline tests of the new unit were performed to compare its performance to that of the previous test articles. Testing of compressed gas purge operations helped refine launchpad operating condition recommendations developed in earlier testing. Operating conditions used in flight program computer models were tested to validate the model projections. Specific operating conditions that were recommended by the JSC test team based on past test results were also tested for validation. The effects of vacuum regeneration line pressure on resulting cabin conditions was studied for high metabolic load periods, and a maximum pressure is recommended

2009 Continued Testing of the Orion Atmosphere Revitalization Technology

NASA Technical Reports Server (NTRS)

Button, Amy Lin; Sweterlitsch, Jeffrey

2009-01-01

An amine-based carbon dioxide (CO2) and water vapor sorbent in pressure-swing regenerable beds has been developed by Hamilton Sundstrand and baselined for the Orion Atmosphere Revitalization System (ARS). In three previous years at this conference, reports were presented on extensive Johnson Space Center (JSC) testing of this technology in a sea-level pressure environment with simulated and real human metabolic loads in both open and closed-loop configurations. The test article design was iterated a third time before the latest series of such tests, which was performed in the first half of 2009. The new design incorporates a canister configuration modification for overall unit compactness and reduced pressure drop, as well as a new process flow control valve that incorporates both compressed gas purge and dual-end vacuum desorption capabilities. This newest test article is very similar to the flight article designs. Baseline tests of the new unit were performed to compare its performance to that of the previous test articles. Testing of compressed gas purge operations helped refine launchpad operating condition recommendations developed in earlier testing. Operating conditions used in flight program computer models were tested to validate the model projections. Specific operating conditions that were recommended by the JSC test team based on past test results were also tested for validation. The effects of vacuum regeneration line pressure on resulting cabin conditions was studied for high metabolic load periods, and a maximum pressure is recommended.

Finding order in heterogeneity: types of quality-improvement intervention publications.

PubMed

Rubenstein, L V; Hempel, S; Farmer, M M; Asch, S M; Yano, E M; Dougherty, D; Shekelle, P W

2008-12-01

Stakeholders in quality improvement agree on the need for augmenting and synthesising the scientific literature supporting it. The diversity of perspectives, approaches, and contexts critical to advancing quality improvement science, however, creates challenges. The paper explores the heterogeneity in clinical quality improvement intervention (QII) publications. A preliminary classification framework was developed for QII articles, aiming for categories homogeneous enough to support coherent scientific discussion on QII reporting standards and facilitate systematic review. QII experts were asked to identify articles important to QII science. The framework was tested and revised by applying it to the article set. The final framework screened articles into (1) empirical literature on development and testing of QIIs; (2) QII stories, theories, and frameworks; (3) QII literature syntheses and meta-analyses; or (4) development and testing of QII-related tools. To achieve homogeneity, category (1) required division into (1a) development of QIIs; 1(b) history, documentation, or description of QIIs; or (1c) success, effectiveness or impact of QIIs. By discussing unique issues and established standards relevant to each category, QII stakeholders can advance QII practice and science, including the scope and conduct of systematic literature reviews.

Criteria for structural test

NASA Technical Reports Server (NTRS)

1973-01-01

The results of a study to define criteria and techniques of design, analysis and test which permit the use of a single major structural test article for performing dynamic, fatigue, and static testing are presented. The criteria developed is applicable to both space vehicles and aircraft structures operating in the subsonic or supersonic regime. The feasibility of such an approach was demonstrated by defining test interactions, compatibilities and incompatibilities between the three different types of tests. The results of the study indicate that the single test article concept is feasible with a testing sequence of dynamic test followed by a fatigue and static test.

Stress Rupture Testing and Analysis of the NASA WSTF-JPL Carbon Overwrapped Pressure Vessels

NASA Technical Reports Server (NTRS)

Greene, Nathanael; Yoder, Tommy; Saulsberry, Regor; Grimes, Lorie; Thesken, John; Phoenix, Leigh

2007-01-01

Carbon composite overwrapped pressure vessels (COPVs) are widely used in applications from spacecraft to life support. COPV technology provides a pressurized media storage advantage over amorphous technology with weight savings on the order of 30 percent. The National Aeronautics and Space Administration (NASA) has been supporting the development of this technology since the early 1970's with an interest in safe application of these components to reduce mass to orbit. NASA White Sands Test Facility (WSTF) has been testing components in support of this objective since the 1980s and has been involved in test development and analysis to address affects of impact, propellant and cryogenic fluids exposure on Kevlar and carbon epoxy. The focus of this paper is to present results of a recent joint WSTF-Jet Propulsion Laboratories (JPL) effort to assess safe life of these components. The WSTF-JPL test articles consisted of an aluminum liner and a carbon fiber overwrap in an industry standard epoxy resin system. The vessels were specifically designed with one plus-minus helical wrap and one hoop wrap over the helical and they measured 4.23 x 11.4 in. long. 120 test articles were manufactured in August of 1998 of one lot fiber and resin and the 110 test articles were delivered to WSTF for test. Ten of the 120 test articles were burst tested at the manufacturer to establish the delivered fiber stress. Figure 1 shows a test article in a pre burst condition and with a hoop fiber failure (no leak of pressurized media) and post burst (failure of liner and loss of pressurized media).

Development of optimized, graded-permeability axial groove heat pipes

NASA Technical Reports Server (NTRS)

Kapolnek, Michael R.; Holmes, H. Rolland

1988-01-01

Heat pipe performance can usually be improved by uniformly varying or grading wick permeability from end to end. A unique and cost effective method for grading the permeability of an axial groove heat pipe is described - selective chemical etching of the pipe casing. This method was developed and demonstrated on a proof-of-concept test article. The process improved the test article's performance by 50 percent. Further improvement is possible through the use of optimally etched grooves.

Subscale and Full-Scale Testing of Buckling-Critical Launch Vehicle Shell Structures

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.; Haynie, Waddy T.; Lovejoy, Andrew E.; Roberts, Michael G.; Norris, Jeffery P.; Waters, W. Allen; Herring, Helen M.

2012-01-01

New analysis-based shell buckling design factors (aka knockdown factors), along with associated design and analysis technologies, are being developed by NASA for the design of launch vehicle structures. Preliminary design studies indicate that implementation of these new knockdown factors can enable significant reductions in mass and mass-growth in these vehicles and can help mitigate some of NASA s launch vehicle development and performance risks by reducing the reliance on testing, providing high-fidelity estimates of structural performance, reliability, robustness, and enable increased payload capability. However, in order to validate any new analysis-based design data or methods, a series of carefully designed and executed structural tests are required at both the subscale and full-scale level. This paper describes recent buckling test efforts at NASA on two different orthogrid-stiffened metallic cylindrical shell test articles. One of the test articles was an 8-ft-diameter orthogrid-stiffened cylinder and was subjected to an axial compression load. The second test article was a 27.5-ft-diameter Space Shuttle External Tank-derived cylinder and was subjected to combined internal pressure and axial compression.

BMI Sandwich Wing Box Analysis and Test

NASA Technical Reports Server (NTRS)

Palm, Tod; Mahler, Mary; Shah, Chandu; Rouse, Marshall; Bush, Harold; Wu, Chauncey; Small, William J.

2000-01-01

A composite sandwich single bay wing box test article was developed by Northrop Grumman and tested recently at NASA Langley Research Center. The objectives for the wing box development effort were to provide a demonstration article for manufacturing scale up of structural concepts related to a high speed transport wing, and to validate the structural performance of the design. The box concept consisted of highly loaded composite sandwich wing skins, with moderately loaded composite sandwich spars. The dimensions of the box were chosen to represent a single bay of the main wing box, with a spar spacing of 30 inches, height of 20 inches constant depth, and length of 64 inches. The bismaleimide facesheet laminates and titanium honeycomb core chosen for this task are high temperature materials able to sustain a 300F service temperature. The completed test article is shown in Figure 1. The tests at NASA Langley demonstrated the structures ability to sustain axial tension and compression loads in excess of 20,000 lb/in, and to maintain integrity in the thermal environment. Test procedures, analysis failure predictions, and test results are presented.

SWI 1.10 Testing Process

NASA Technical Reports Server (NTRS)

Stokes, LeBarian

2009-01-01

This procedure establishes a system for performing testing in the Six-Degree-Of-Freedom Dynamic Test System (SDTS). Testing includes development and verification testing of customer supplied Test Articles (TAs) and other testing requirements, as requested. This procedure applies to all SDTS testing operations and equipment. The procedure provides an overview of testing performed in the SDTS including test identification requirements, test planning and procedure development, test and performance inspection, test data analysis, and test report generation.

Liquid hydrogen turbopump ALS advanced development program. Volume 1: Hot fire unit

NASA Technical Reports Server (NTRS)

Lindley, Bruce

1990-01-01

The interface criteria for the Turbopump Test article (TPA) and the Component Test Facility located at NASA, Stennis Space Center is defined by this interface Control Document (ICD). TPA ICD Volume 2 is submitted for the Cold Gas Drive Turbopump Test Article, which is generally similar but incorporates certain changes, particularly in fluid requirements and in instrumentation needs. For the purposes of this ICD, the test article consists of the Hot Fire Drive Turbopump mounted on its test cart, readied for installation in the component test facility. It should be emphasized that the LH2 turbopump program is still in its early concept design phase. Design of the turbopump, test cart, and spools are subject to revisions until successful conclusion of the Detail Design Review (DDR).

Multicultural issues in test interpretation.

PubMed

Langdon, Henriette W; Wiig, Elisabeth H

2009-11-01

Designing the ideal test or series of tests to assess individuals who speak languages other than English is difficult. This article first describes some of the roadblocks-one of which is the lack of identification criteria for language and learning disabilities in monolingual and bilingual populations in most countries of the non-English-speaking world. This lag exists, in part, because access to general education is often limited. The second section describes tests that have been developed in the United States, primarily for Spanish-speaking individuals because they now represent the largest first-language majority in the United States (80% of English-language learners [ELLs] speak Spanish at home). We discuss tests developed for monolingual and bilingual English-Spanish speakers in the United States and divide this coverage into two parts: The first addresses assessment of students' first language (L1) and second language (L2), usually English, with different versions of the same test; the second describes assessment of L1 and L2 using the same version of the test, administered in the two languages. Examples of tests that fit a priori-determined criteria are briefly discussed throughout the article. Suggestions how to develop tests for speakers of languages other than English are also provided. In conclusion, we maintain that there will never be a perfect test or set of tests to adequately assess the communication skills of a bilingual individual. This is not surprising because we have yet to develop an ideal test or set of tests that fits monolingual Anglo speakers perfectly. Tests are tools, and the speech-language pathologist needs to know how to use those tools most effectively and equitably. The goal of this article is to provide such guidance. Thieme Medical Publishers.

Development and efficiency assessment of process lubrication for hot forging

NASA Astrophysics Data System (ADS)

Kargin, S.; Artyukh, Viktor; Ignatovich, I.; Dikareva, Varvara

2017-10-01

The article considers innovative technologies in testing and production of process lubricants for hot bulk forging. There were developed new compositions of eco-friendly water-graphite process lubricants for hot extrusion and forging. New approaches to efficiency assessment of process lubricants are developed and described in the following article. Laboratory and field results are presented.

Ten factors to consider when developing usability scenarios and tasks for health information technology.

PubMed

Russ, Alissa L; Saleem, Jason J

2018-02-01

The quality of usability testing is highly dependent upon the associated usability scenarios. To promote usability testing as part of electronic health record (EHR) certification, the Office of the National Coordinator (ONC) for Health Information Technology requires that vendors test specific capabilities of EHRs with clinical end-users and report their usability testing process - including the test scenarios used - along with the results. The ONC outlines basic expectations for usability testing, but there is little guidance in usability texts or scientific literature on how to develop usability scenarios for healthcare applications. The objective of this article is to outline key factors to consider when developing usability scenarios and tasks to evaluate computer-interface based health information technologies. To achieve this goal, we draw upon a decade of our experience conducting usability tests with a variety of healthcare applications and a wide range of end-users, to include healthcare professionals as well as patients. We discuss 10 key factors that influence scenario development: objectives of usability testing; roles of end-user(s); target performance goals; evaluation time constraints; clinical focus; fidelity; scenario-related bias and confounders; embedded probes; minimize risks to end-users; and healthcare related outcome measures. For each factor, we present an illustrative example. This article is intended to aid usability researchers and practitioners in their efforts to advance health information technologies. The article provides broad guidance on usability scenario development and can be applied to a wide range of clinical information systems and applications. Published by Elsevier Inc.

Launch Vehicle Sizing Benefits Utilizing Main Propulsion System Crossfeed and Project Status

NASA Technical Reports Server (NTRS)

Chandler, Frank; Scheiern, M.; Champion, R.; Mazurkivich, P.; Lyles, Garry (Technical Monitor)

2002-01-01

To meet the goals for a next generation Reusable Launch Vehicle (RLV), a unique propulsion feed system concept was identified using crossfeed between the booster and orbiter stages that could reduce the Two-Stage-to-Orbit (TSTO) vehicle weight and Design, Development, Test and Evaluation (DDT&E) costs by approximately 25%, while increasing safety and reliability. The Main Propulsion System (MPS) crossfeed water demonstration test program addresses all activities required to reduce the risks for the MPS crossfeed system from a Technology Readiness Level (TRL) of 2 to 4 by the completion of testing and analysis by June 2003. During the initial period, that ended in March 2002, a subscale water flow test article was defined. Procurement of a subscale crossfeed check valve was initiated and the specifications for the various components were developed. The fluid transient and pressurization analytical models were developed separately and successfully integrated. The test matrix for the water flow test was developed to correlate the integrated model. A computational fluid dynamics (CFD) model of the crossfeed check valve was developed to assess flow disturbances and internal flow dynamics. Based on the results, the passive crossfeed system concept was very feasible and offered a safe system to be used in an RLV architecture. A water flow test article was designed to accommodate a wide range of flows simulating a number of different types of propellant systems. During the follow-on period, the crossfeed system model will be further refined, the test article will be completed, the water flow test will be performed, and finally the crossfeed system model will be correlated with the test data. This validated computer model will be used to predict the full-scale vehicle crossfeed system performance.

Finite Element Analysis and Test Correlation of a 10-Meter Inflation-Deployed Solar Sail

NASA Technical Reports Server (NTRS)

Sleight, David W.; Michii, Yuki; Lichodziejewski, David; Derbes, Billy; Mann. Troy O.; Slade, Kara N.; Wang, John T.

2005-01-01

Under the direction of the NASA In-Space Propulsion Technology Office, the team of L Garde, NASA Jet Propulsion Laboratory, Ball Aerospace, and NASA Langley Research Center has been developing a scalable solar sail configuration to address NASA's future space propulsion needs. Prior to a flight experiment of a full-scale solar sail, a comprehensive phased test plan is currently being implemented to advance the technology readiness level of the solar sail design. These tests consist of solar sail component, subsystem, and sub-scale system ground tests that simulate the vacuum and thermal conditions of the space environment. Recently, two solar sail test articles, a 7.4-m beam assembly subsystem test article and a 10-m four-quadrant solar sail system test article, were tested in vacuum conditions with a gravity-offload system to mitigate the effects of gravity. This paper presents the structural analyses simulating the ground tests and the correlation of the analyses with the test results. For programmatic risk reduction, a two-prong analysis approach was undertaken in which two separate teams independently developed computational models of the solar sail test articles using the finite element analysis software packages: NEiNastran and ABAQUS. This paper compares the pre-test and post-test analysis predictions from both software packages with the test data including load-deflection curves from static load tests, and vibration frequencies and mode shapes from vibration tests. The analysis predictions were in reasonable agreement with the test data. Factors that precluded better correlation of the analyses and the tests were uncertainties in the material properties, test conditions, and modeling assumptions used in the analyses.

Designing an Affordable Usability Test for E-Learning Modules

ERIC Educational Resources Information Center

O'Bryan, Corliss A.; Johnson, Donald M.; Shores-Ellis, Katrina D.; Crandall, Philip G.; Marcy, John A.; Seideman, Steve C.; Ricke, Steven C.

2010-01-01

This article provides background and an introduction to a user-centered design and usability test in an inexpensive format that allows content experts who are novices in e-learning development to perform testing on newly developed technical training modules prior to their release. The use of a small number of test participants, avoidance of…

Hypersonic Inflatable Aerodynamic Decelerator (HIAD) Torus Mechanical Testing

NASA Technical Reports Server (NTRS)

Chen, Tony; Moholt, Matthew R.; Hudson, Larry D.

2017-01-01

The Armstrong Flight Research Center has performed loads testing of a series of developmental atmospheric entry decelerator structural components. Test setup hardware were designed and fabricated. In addition, test plan and checklist were developed for the consistent and efficient execution of the tests. Eight test articles were successfully tested in over one hundred test runs as test objectives were met. Test article buckling shapes and buckling loads were observed. Displacements and strains were also recorded as various load cases were applied. The test data was sent to Langley Research Center to help with the construction of the finite element model of the decelerator assembly.

Thermal and Fluid Modeling of the CRYogenic Orbital TEstbed (CRYOTE) Ground Test Article (GTA)

NASA Technical Reports Server (NTRS)

Piryk, David; Schallhorn, Paul; Walls, Laurie; Stopnitzky, Benny; Rhys, Noah; Wollen, Mark

2012-01-01

The purpose of this study was to anchor thermal and fluid system models to data acquired from a ground test article (GTA) for the CRYogenic Orbital TEstbed - CRYOTE. To accomplish this analysis, it was broken into four primary tasks. These included model development, pre-test predictions, testing support at Marshall Space Flight Center (MSFC} and post-test correlations. Information from MSFC facilitated the task of refining and correlating the initial models. The primary goal of the modeling/testing/correlating efforts was to characterize heat loads throughout the ground test article. Significant factors impacting the heat loads included radiative environments, multi-layer insulation (MLI) performance, tank fill levels, tank pressures, and even contact conductance coefficients. This paper demonstrates how analytical thermal/fluid networks were established, and it includes supporting rationale for specific thermal responses seen during testing.

Structural Analysis of an Inflation-Deployed Solar Sail With Experimental Validation

NASA Technical Reports Server (NTRS)

Sleight, David W.; Michii, Yuki; Lichodziejewski, David; Derbes, Billy; Mann, Troy O.

2005-01-01

Under the direction of the NASA In-Space Propulsion Technology Office, the team of L Garde, NASA Jet Propulsion Laboratory, Ball Aerospace, and NASA Langley Research Center has been developing a scalable solar sail configuration to address NASA s future space propulsion needs. Prior to a flight experiment of a full-scale solar sail, a comprehensive phased test plan is currently being implemented to advance the technology readiness level of the solar sail design. These tests consist of solar sail component, subsystem, and sub-scale system ground tests that simulate the vacuum and thermal conditions of the space environment. Recently, two solar sail test articles, a 7.4-m beam assembly subsystem test article and a 10-m four-quadrant solar sail system test article, were tested in vacuum conditions with a gravity-offload system to mitigate the effects of gravity. This paper presents the structural analyses simulating the ground tests and the correlation of the analyses with the test results. For programmatic risk reduction, a two-prong analysis approach was undertaken in which two separate teams independently developed computational models of the solar sail test articles using the finite element analysis software packages: NEiNastran and ABAQUS. This paper compares the pre-test and post-test analysis predictions from both software packages with the test data including load-deflection curves from static load tests, and vibration frequencies and mode shapes from structural dynamics tests. The analysis predictions were in reasonable agreement with the test data. Factors that precluded better correlation of the analyses and the tests were uncertainties in the material properties, test conditions, and modeling assumptions used in the analyses.

Space Shuttle inflatable training articles

NASA Technical Reports Server (NTRS)

West, M. L.

1984-01-01

The design, development, construction, and testing of the Long Duration Exposure Facility inflatable and the space telescope training articles are discussed. While these articles are of similar nature, materials, and construction, they vary in size and present different problems with regards to size, shape, gross/net lift, and balance.

Physical examination and laboratory tests in the management of patients with rheumatoid arthritis: development of recommendations for clinical practice based on published evidence and expert opinion.

PubMed

Pham, Thao; Gossec, Laure; Fautrel, Bruno; Combe, Bernard; Flipo, René-Marc; Goupille, Philippe; Le Loët, Xavier; Mariette, Xavier; Puéchal, Xavier; Wendling, Daniel; Schaeverbeke, Thierry; Sibilia, Jean; Sany, Jacques; Dougados, Maxime

2005-05-01

To develop recommendations for the physical and laboratory-test follow-up of patients with rheumatoid arthritis (RA) seen in everyday practice, using evidence from the literature, supplemented with expert opinion when needed. A scientific committee selected 7-10 questions using the Delphi consensus procedure. Evidence-based responses to each question were sought in the literature and were then used by a panel to develop recommendations. To fill in gaps in knowledge from the literature, the panelists relied on their personal opinion. The seven questions dealt with the physical and laboratory-test follow-up of RA and the factors predicting disease severity. The literature review identified 799 articles whose title and abstract suggested relevance to the study. Elimination of articles that provided no data on the study topic left 128 original articles. The panel developed seven recommendations, one for each question, which were accepted by consensus. Recommendations about the physical and laboratory-test follow-up of patients with RA seen in everyday practice were developed. Because they constitute an objective foundation built by consensus among experts, should improve the uniformity and quality of care provided to RA patients in everyday practice.

Expanding Horizons and Unresolved Conundrums: Language Testing and Assessment

ERIC Educational Resources Information Center

Leung, Constant; Lewkowicz, Jo

2006-01-01

Since the last "TESOL Quarterly" commemorative issue 15 years ago, there have been too many important developments in language testing and assessment for all of them to be discussed in a single article. Therefore, this article focuses on issues that we believe are integrally linked to pedagogic and curriculum concerns of English language teaching.…

An Instrument to Assess Beliefs about Standardized Testing: Measuring the Influence of Epistemology on the Endorsement of Standardized Testing

ERIC Educational Resources Information Center

Magee, Robert G.; Jones, Brett D.

2012-01-01

This article describes the development of an instrument to assess beliefs about standardized testing in schools, a topic of much heated debate. The Beliefs About Standardized Testing scale was developed to measure the extent to which individuals support high-stakes standardized testing. The 9-item scale comprises three subscales which measure…

The Implications of Family Size and Birth Order for Test Scores and Behavioral Development

ERIC Educational Resources Information Center

Silles, Mary A.

2010-01-01

This article, using longitudinal data from the National Child Development Study, presents new evidence on the effects of family size and birth order on test scores and behavioral development at age 7, 11 and 16. Sibling size is shown to have an adverse causal effect on test scores and behavioral development. For any given family size, first-borns…

Birth Weight: MedlinePlus Health Topic

MedlinePlus

... Articles References and abstracts from MEDLINE/PubMed (National Library of Medicine) Article: Effects of abnormal 75 g oral glucose tolerance test at different... ... (National Institute of Child Health and Human Development) ...

Liquid Oxygen (LO2) propellant conditioning concept testing

NASA Technical Reports Server (NTRS)

Perry, Gretchen L. E.; Orth, Michael S.; Mehta, Gopal K.

1993-01-01

Marshall Space Flight Center (MSFC) and industry contractors have undertaken activities to develop a simplified liquid oxygen (LO2) propellant conditioning concept for future expendable launch vehicles. The objective of these activities is to reduce operations costs and timelines and to improve safety of these vehicles. The approach followed has been to identify novel concepts through system level studies and demonstrate the feasibility of these concepts through small-scale and full-scale testing. Testing will also provide data for design guidelines and validation of analytical models. Four different concepts are being investigated: no-bleed, low-bleed, use of a recirculation line, and helium (He) bubbling. This investigation is being done under a Joint Institutional Research and Development (JIRAD) program currently in effect between MSFC and General Dynamics Space Systems (GDSS). A full-scale test article, which is a facsimile of a propellant feed duct with an attached section to simulate heat input from a LO2 turbopump, will be tested at the Cold Flow Facility at MSFC's West Test Area. Liquid nitrogen (LN2), which has similar properties to LO2, will be used in place of LO2 for safety and budget reasons. Work to date includes design and fabrication of the test article, design of the test facility and initial fabrication, development of a test matrix and test procedures, initial predictions of test output, and heat leak calibration and heat exchanger tests on the test article. The tests for all propellant conditioning concepts will be conducted in the summer of 1993, with the final report completed by October, 1993.

The Need, Development, and Validation of the Innovation Test Instrument

ERIC Educational Resources Information Center

Wheadon, Jacob; Wright, Geoff A.; West, Richard E.; Skaggs, Paul

2017-01-01

This study discusses the need, development, and validation of the Innovation Test Instrument (ITI). This article outlines how the researchers identified the content domain of the assessment and created test items. Then, it describes initial validation testing of the instrument. The findings suggest that the ITI is a good first step in creating an…

Experimental Validation of the Dynamic Inertia Measurement Method to Find the Mass Properties of an Iron Bird Test Article

NASA Technical Reports Server (NTRS)

Chin, Alexander; Herrera, Claudia; Spivey, Natalie; Fladung, William; Cloutier, David

2015-01-01

This presentation describes the DIM method and how it measures the inertia properties of an object by analyzing the frequency response functions measured during a ground vibration test (GVT). The DIM method has been in development at the University of Cincinnati and has shown success on a variety of small scale test articles. The NASA AFRC version was modified for larger applications.

New Directions in Special Education.

ERIC Educational Resources Information Center

Jones, Reginald L., Ed.

The text presents a collection of articles dealing with new research and developments relevant to special education. Discussions include automation, teaching machines, programed instruction, psycholinguistic testing, differential diagnosis, language development and testing, and remediation techniques. Other topics consider measurement of behavior,…

Ares I Scale Model Acoustic Tests Instrumentation for Acoustic and Pressure Measurements

NASA Technical Reports Server (NTRS)

Vargas, Magda B.; Counter, Douglas D.

2011-01-01

The Ares I Scale Model Acoustic Test (ASMAT) was a development test performed at the Marshall Space Flight Center (MSFC) East Test Area (ETA) Test Stand 116. The test article included a 5% scale Ares I vehicle model and tower mounted on the Mobile Launcher. Acoustic and pressure data were measured by approximately 200 instruments located throughout the test article. There were four primary ASMAT instrument suites: ignition overpressure (IOP), lift-off acoustics (LOA), ground acoustics (GA), and spatial correlation (SC). Each instrumentation suite incorporated different sensor models which were selected based upon measurement requirements. These requirements included the type of measurement, exposure to the environment, instrumentation check-outs and data acquisition. The sensors were attached to the test article using different mounts and brackets dependent upon the location of the sensor. This presentation addresses the observed effect of the sensors and mounts on the acoustic and pressure measurements.

TEACHING MACHINES AND PROGRAMMED LEARNING, A SOURCE BOOK.

ERIC Educational Resources Information Center

LUMSDAINE, A.A., ED.; GLASER, ROBERT, ED.

BROUGHT TOGETHER HERE IS THE WIDELY-SCATTERED LITERATURE ON SELF-INSTRUCTIONAL PROGRAMS AND DEVICES BY LEADERS, PAST AND PRESENT, IN THEIR DEVELOPMENT. S.L. PRESSEY IN HIS ARTICLES DESCRIBES THE APPARATUS, METHODS, THEORY, AND RESULTS ATTENDANT UPON USE OF HIS TEST-SCORING DEVICES. B.F. SKINNER IN HIS ARTICLES DEVELOPS THEORY, DESCRIBES MACHINES,…

The Multilingual Reader: Advantages in Understanding and Decoding German Sentence Structure when Reading German as an L3

ERIC Educational Resources Information Center

Peyer, Elisabeth; Kaiser, Irmtraud; Berthele, Raphael

2010-01-01

This study investigates Italian and French students' grammatical problems while reading in German as an L3 or L4. For the study, we developed a reading test which consists of invented encyclopaedia articles on imaginary animals. These articles enabled us to test various grammatical structures for their receptive difficulty. This paper discusses…

Cholesterol Point-of-Care Testing for Community Pharmacies: A Review of the Current Literature.

PubMed

Haggerty, Lauren; Tran, Deanna

2017-08-01

To summarize the literature on cholesterol point-of-care tests (POCTs). This article would serve as a resource to assist community pharmacists in developing cholesterol point-of-care (POC) pharmacy services. A literature search was performed in MEDLINE Ovid, PubMed, EMBASE, and Cochrane database using the following medical subject headings (MeSH) terms: point-of-care test, cholesterol, blood chemical analysis, rapid testing, collaborative practice, community pharmacy, and ambulatory care. Additional resources including device manufacturer web sites were summarized to supplement the current literature. All human research articles, review articles, meta-analyses, and abstracts published in English through September 1, 2014, were considered. A total of 36 articles were applicable for review. Information was divided into the following categories to be summarized: devices, pharmacists' impact, and operational cost for the pharmacy. The current literature suggests that POCTs in community pharmacies assist with patient outcomes by providing screenings and referring patients with dyslipidemia for further evaluation. The majority of studies on cholesterol POC devices focused on accuracy, revealing the need for further studies to develop best practices and practice models with successful reimbursement. Accuracy, device specifications, required supplies, and patient preference should be considered when selecting a POC device for purchase.

Integrated smart structures wingbox

NASA Astrophysics Data System (ADS)

Simon, Solomon H.

1993-09-01

One objective of smart structures development is to demonstrate the ability of a mechanical component to monitor its own structural integrity and health. Achievement of this objective requires the integration of different technologies, i.e.: (1) structures, (2) sensors, and (3) artificial intelligence. We coordinated a team of experts from these three fields. These experts used reliable knowledge towards the forefront of their technologies and combined the appropriate features into an integrated hardware/software smart structures wingbox (SSW) test article. A 1/4 in. hole was drilled into the SSW test article. Although the smart structure had never seen damage of this type, it correctly recognized and located the damage. Based on a knowledge-based simulation, quantification and assessment were also carried out. We have demonstrated that the SSW integrated hardware & software test article can perform six related functions: (1) identification of a defect; (2) location of the defect; (3) quantification of the amount of damage; (4) assessment of performance degradation; (5) continued monitoring in spite of damage; and (6) continuous recording of integrity data. We present the successful results of the integrated test article in this paper, along with plans for future development and deployment of the technology.

Hot-Fire Test Results of an Oxygen/RP-2 Multi-Element Oxidizer-Rich Staged-Combustion Integrated Test Article

NASA Technical Reports Server (NTRS)

Hulka, J. R.; Protz, C. S.; Garcia, C. P.; Casiano, M. J.; Parton, J. A.

2016-01-01

As part of the Combustion Stability Tool Development project funded by the Air Force Space and Missile Systems Center, the NASA Marshall Space Flight Center was contracted to assemble and hot-fire test a multi-element integrated test article demonstrating combustion characteristics of an oxygen/hydrocarbon propellant oxidizer-rich staged-combustion engine thrust chamber. Such a test article simulates flow through the main injectors of oxygen/kerosene oxidizer-rich staged combustion engines such as the Russian RD-180 or NK-33 engines, or future U.S.-built engine systems such as the Aerojet-Rocketdyne AR-1 engine or the Hydrocarbon Boost program demonstration engine. For the thrust chamber assembly of the test article, several configurations of new main injectors, using relatively conventional gas-centered swirl coaxial injector elements, were designed and fabricated. The design and fabrication of these main injectors are described in a companion paper at this JANNAF meeting. New ablative combustion chambers were fabricated based on hardware previously used at NASA for testing at similar size and pressure. An existing oxygen/RP-1 oxidizer-rich subscale preburner injector from a previous NASA-funded program, along with existing and new inter-connecting hot gas duct hardware, were used to supply the oxidizer-rich combustion products to the oxidizer circuit of the main injector of the thrust chamber. Results from independent hot-fire tests of the preburner injector in a combustion chamber with a sonic throat are described in companion papers at this JANNAF conference. The resulting integrated test article - which includes the preburner, inter-connecting hot gas duct, main injector, and ablative combustion chamber - was assembled at Test Stand 116 at the East Test Area of the NASA Marshall Space Flight Center. The test article was well instrumented with static and dynamic pressure, temperature, and acceleration sensors to allow the collected data to be used for combustion analysis model development. Hot-fire testing was conducted with main combustion chamber pressures ranging from 1400 to 2100 psia, and main combustion chamber mixture ratios ranging from 2.4 to 2.9. Different levels of fuel film cooling injected from the injector face were examined ranging from none to about 12% of the total fuel flow. This paper presents the hot-fire test results of the integrated test article. Combustion performance, stability, thermal, and compatibility characteristics of both the preburner and the thrust chamber are described. Another companion paper at this JANNAF meeting includes additional and more detailed test data regarding the combustion dynamics and stability characteristics.

Overview of an Advanced Hypersonic Structural Concept Test Program

NASA Technical Reports Server (NTRS)

Stephens, Craig A.; Hudson, Larry D.; Piazza, Anthony

2007-01-01

This viewgraph presentation provides an overview of hypersonics M&S advanced structural concepts development and experimental methods. The discussion on concepts development includes the background, task objectives, test plan, and current status of the C/SiC Ruddervator Subcomponent Test Article (RSTA). The discussion of experimental methods examines instrumentation needs, sensors of interest, and examples of ongoing efforts in the development of extreme environment sensors.

Orion EFT-1 Heat Shield move from LASF to VAB for Ground Test Article Integration

NASA Image and Video Library

2017-04-26

The heat shield for Exploration Flight Test-1 is transferred from the Orion Program to the Ground Systems Development and Operations Program, Landing and Recovery Operations to be integrated with the Ground Test Article to be utilized for future Underway Recovery Testing. After transport from the Launch Abort System Facility (LASF) to the Vehicle Assembly Building (VAB), the heat shield is lifted off of the transport truck and placed onto foam pads (dunnage) for inspection in Highbay 2 of the VAB.

Performance Testing of a Trace Contaminant Control Subassembly for the International Space Station

NASA Technical Reports Server (NTRS)

Perry, J. L.; Curtis, R. E.; Alexandre, K. L.; Ruggiero, L. L.; Shtessel, N.

1998-01-01

As part of the International Space Station (ISS) Trace Contaminant Control Subassembly (TCCS) development, a performance test has been conducted to provide reference data for flight verification analyses. This test, which used the U.S. Habitation Module (U.S. Hab) TCCS as the test article, was designed to add to the existing database on TCCS performance. Included in this database are results obtained during ISS development testing; testing of functionally similar TCCS prototype units; and bench scale testing of activated charcoal, oxidation catalyst, and granular lithium hydroxide (LiOH). The present database has served as the basis for the development and validation of a computerized TCCS process simulation model. This model serves as the primary means for verifying the ISS TCCS performance. In order to mitigate risk associated with this verification approach, the U.S. Hab TCCS performance test provides an additional set of data which serve to anchor both the process model and previously-obtained development test data to flight hardware performance. The following discussion provides relevant background followed by a summary of the test hardware, objectives, requirements, and facilities. Facility and test article performance during the test is summarized, test results are presented, and the TCCS's performance relative to past test experience is discussed. Performance predictions made with the TCCS process model are compared with the U.S. Hab TCCS test results to demonstrate its validation.

Construction of Tasks in Order to Develop and Promote Classroom Communication in Mathematics

ERIC Educational Resources Information Center

Olteanu, Lucian

2015-01-01

In this article, the focus is on task construction and the importance of this process to develop and promote classroom communication in mathematics. The students' tests, examination of students' mathematical work, the teachers' lesson plans, and reports of the lessons' instructions are the basic data for this article. The analysis indicated that…

Manned remote work station development article

NASA Technical Reports Server (NTRS)

1978-01-01

Flight article and associated design concepts are evaluated to meet fundamental requirements of a universal crew cabin to be used as a construction cherrypicker, a space crane turret, a railed work station, or a free flyer. Key technology developments are embodied into a simulation program. A schedule and simulation test plan matrix is given for the open cabin cherry picker.

Use of the EFPA Test Review Model by the UK and Issues Relating to the Internationalization of Test Standards

ERIC Educational Resources Information Center

Lindley, Patricia A.; Bartram, Dave

2012-01-01

In this article, we present the background to the development of test reviewing by the British Psychological Society (BPS) in the United Kingdom. We also describe the role played by the BPS in the development of the EFPA test review model and its adaptation for use in test reviewing in the United Kingdom. We conclude with a discussion of lessons…

CELBAN™: A 10-Year Retrospective Catherine Lewis & Blanche Kingdon

ERIC Educational Resources Information Center

Lewis, Catherine; Kingdom, Blanche

2016-01-01

This article provides a 10-year review by the test developers of the Canadian English Language Benchmark Assessment for Nurses (CELBAN™). From 2004 to 2014, the development, implementation, national administration, and operations of CELBAN and CELBAN-related products and services were the responsibility of the test developers and team at the…

Initial Development and Validation of the BullyHARM: The Bullying, Harassment, and Aggression Receipt Measure

ERIC Educational Resources Information Center

Hall, William J.

2016-01-01

This article describes the development and preliminary validation of the Bullying, Harassment, and Aggression Receipt Measure (BullyHARM). The development of the BullyHARM involved a number of steps and methods, including a literature review, expert review, cognitive testing, readability testing, data collection from a large sample, reliability…

Development and Testing of a Sorbent-Based Atmosphere Revitalization System 2010/2011

NASA Technical Reports Server (NTRS)

Miller, Lee A.; Knox, James C.

2012-01-01

Spacecraft being developed for future exploration missions incorporate Environmental Control and Life Support Systems (ECLSS) that limit weight, power, and volume thus requiring systems with higher levels of efficiency while maintaining high dependability and robustness. For air revitalization, an approach that meets those goals utilizes a regenerative Vacuum-Swing Adsorption (VSA) system that removes 100% of the CO2 from the cabin atmosphere as well as 100% of the water. A Sorbent Based Atmosphere Revitalization (SBAR) system is a VSA system that utilizes standard commercial adsorbents that have been proven effective and safe in spacecraft including Skylab and the International Space Station. The SBAR system is the subject of a development, test, and evaluation program that is being conducted at NASA s Marshall Space Flight Center. While previous testing had validated that the technology is a viable option, potential improvements to system design and operation were identified. Modifications of the full-scale SBAR test articles and adsorption cycles have been implemented and have shown significant performance gains resulting in a decrease in the consumables required for a mission as well as improved mission safety. Previous testing had utilized single bed test articles, during this period the test facility was enhanced to allow testing on the full 2-bed SBAR system. The test facility simulates a spacecraft ECLSS and allows testing of the SBAR system over the full range of operational conditions using mission simulations that assess the real-time performance of the SBAR system during scenarios that include the metabolic transients associated with extravehicular activity. Although future manned missions are currently being redefined, the atmosphere revitalization requirements for the spacecraft are expected to be quite similar to the Orion and the Altair vehicles and the SBAR test program addressed validation to the defined mission requirements as well as operation in other potential vehicle architectures. The development program, including test articles, the test facility, and tests and results through early 2011 is discussed.

Probabilistic Approaches to Examining Linguistic Features of Test Items and Their Effect on the Performance of English Language Learners

ERIC Educational Resources Information Center

Solano-Flores, Guillermo

2014-01-01

This article addresses validity and fairness in the testing of English language learners (ELLs)--students in the United States who are developing English as a second language. It discusses limitations of current approaches to examining the linguistic features of items and their effect on the performance of ELL students. The article submits that…

Development and Characterization of Reference Materials for Genetic Testing: Focus on Public Partnerships.

PubMed

Kalman, Lisa V; Datta, Vivekananda; Williams, Mickey; Zook, Justin M; Salit, Marc L; Han, Jin Yeong

2016-11-01

Characterized reference materials (RMs) are needed for clinical laboratory test development and validation, quality control procedures, and proficiency testing to assure their quality. In this article, we review the development and characterization of RMs for clinical molecular genetic tests. We describe various types of RMs and how to access and utilize them, especially focusing on the Genetic Testing Reference Materials Coordination Program (Get-RM) and the Genome in a Bottle (GIAB) Consortium. This review also reinforces the need for collaborative efforts in the clinical genetic testing community to develop additional RMs.

Design manual: Oxygen Thermal Test Article (OTTA)

NASA Technical Reports Server (NTRS)

Chronic, W. L.; Baese, C. L.; Conder, R. L.

1974-01-01

The characteristics of a cryogenic tank for storing liquid hydrogen, nitrogen, oxygen, methane, or helium for an extended period of time with minimum losses are discussed. A description of the tank and control module, assembly drawings and details of major subassemblies, specific requirements controlling development of the system, thermal concept considerations, thermal analysis methods, and a record of test results are provided. The oxygen thermal test article thermal protection system has proven that the insulation system for cryogenic vessels is effective.

Beyond Intelligence Testing.

ERIC Educational Resources Information Center

White, Stephen; And Others

1988-01-01

Articles on IQ testing are presented: "Opportunity and Intelligence" (Stephen White); "Beyond the IQ: Education and Human Development" (Howard Gardner); "Beyond IQ Testing" (Robert J. Sternberg); "Working Smarter" (Roger J. Peters); "Varieties of Mind" (John L. Doris, Stephen J. Ceci); "Human…

Multistage Complexity in Language Proficiency Assessment: A Framework for Aligning Theoretical Perspectives, Test Development, and Psychometrics

ERIC Educational Resources Information Center

Luecht, Richard M.

2003-01-01

This article contends that the necessary links between constructs and test scores/decisions in language assessment must be established through principled design procedures that align three models: (1) a theoretical construct model; (2) a test development model; and (3) a psychometric scoring model. The theoretical construct model articulates the…

Development and Validation of a Diagnostic Grammar Test for Japanese Learners of English

ERIC Educational Resources Information Center

Koizumi, Rie; Sakai, Hideki; Ido, Takahiro; Ota, Hiroshi; Hayama, Megumi; Sato, Masatoshi; Nemoto, Akiko

2011-01-01

This article reports on the development and validation of the English Diagnostic Test of Grammar (EDiT Grammar) for Japanese learners of English. From among the many aspects of grammar, this test focuses on the knowledge of basic English noun phrases (NPs), especially their internal structures, because previous research has indicated the…

Initial Development and Factor Structure of the Educator Test Stress Inventory

ERIC Educational Resources Information Center

von der Embse, Nathaniel P.; Kilgus, Stephen P.; Solomon, Hadley J.; Bowler, Mark; Curtiss, Caroline

2015-01-01

With the proliferation of test-based accountability policies, educators and students alike are under pressure to improve test performance. However, little is known regarding the stress experienced by educators in response to these policies. The purpose of this article is to describe the initial development and validation of a new measure of stress…

Culture-Specific Testing: Part 1.

ERIC Educational Resources Information Center

Williams, Robert L., Ed.

1981-01-01

In five articles provides a rationale for the development of culturally specific tests, presents research on their use, and discusses clinical uses. Focuses on two Afro-centric projective tests: The Thematic Apperception Test and Themes Concerning Blacks. Criticizes use of traditional projective tests and points out viable alternatives. (JAC)

Anomalous Thrust Production from an RF Test Device Measured on a Low-Thrust Torsion Pendulum

NASA Technical Reports Server (NTRS)

Brady, David; White, Harold G.; March, Paul; Lawrence, James T.; Davies, Frank J.

2014-01-01

This paper describes the eight-day August 2013 test campaign designed to investigate and demonstrate viability of using classical magnetoplasmadynamics to obtain a propulsive momentum transfer via the quantum vacuum virtual plasma. This paper will not address the physics of the quantum vacuum plasma thruster, but instead will describe the test integration, test operations, and the results obtained from the test campaign. Approximately 30-50 micro-Newtons of thrust were recorded from an electric propulsion test article consisting primarily of a radio frequency (RF) resonant cavity excited at approximately 935 megahertz. Testing was performed on a low-thrust torsion pendulum that is capable of detecting force at a single-digit micronewton level, within a stainless steel vacuum chamber with the door closed but at ambient atmospheric pressure. Several different test configurations were used, including two different test articles as well as a reversal of the test article orientation. In addition, the test article was replaced by an RF load to verify that the force was not being generated by effects not associated with the test article. The two test articles were designed by Cannae LLC of Doylestown, Pennsylvania. The torsion pendulum was designed, built, and operated by Eagleworks Laboratories at the NASA Johnson Space Center of Houston, Texas. Approximately six days of test integration were required, followed by two days of test operations, during which, technical issues were discovered and resolved. Integration of the two test articles and their supporting equipment was performed in an iterative fashion between the test bench and the vacuum chamber. In other words, the test article was tested on the bench, then moved to the chamber, then moved back as needed to resolve issues. Manual frequency control was required throughout the test. Thrust was observed on both test articles, even though one of the test articles was designed with the expectation that it would not produce thrust. Specifically, one test article contained internal physical modifications that were designed to produce thrust, while the other did not (with the latter being referred to as the "null" test article). Test data gathered includes torsion pendulum displacement measurements which are used to calculate generated force, still imagery in the visible spectrum to document the physical configuration, still imagery in the infrared spectrum to characterize the thermal environment, and video imagery. Post-test data includes static and animated graphics produced during RF resonant cavity characterization using the COMSOL Multiphysics® software application. Excerpts from all of the above are included and discussed in this paper. Lessons learned from test integration and operations include identification of the need to replace manual control of the resonant cavity target frequency with an automated frequency control capability. Future test plans include the development of an automatic frequency control circuit. Test results indicate that the RF resonant cavity thruster design, which is unique as an electric propulsion device, is producing a force that is not attributable to any classical electromagnetic phenomenon and therefore is potentially demonstrating an interaction with the quantum vacuum virtual plasma. Future test plans include independent verification and validation at other test facilities.

An Overview of Intelligence Testing.

ERIC Educational Resources Information Center

White, Margaret B.; Hall, Alfred E.

1980-01-01

This article briefly traces the development of intelligence testing from its beginnings in 1905 with Alfred Binet; cites the intelligence theories of Spearman, Thurstone, and Guilford; and examines current objections to intelligence tests in terms of what they test and how they are interpreted. (SJL)

Automated systems to identify relevant documents in product risk management

PubMed Central

2012-01-01

Background Product risk management involves critical assessment of the risks and benefits of health products circulating in the market. One of the important sources of safety information is the primary literature, especially for newer products which regulatory authorities have relatively little experience with. Although the primary literature provides vast and diverse information, only a small proportion of which is useful for product risk assessment work. Hence, the aim of this study is to explore the possibility of using text mining to automate the identification of useful articles, which will reduce the time taken for literature search and hence improving work efficiency. In this study, term-frequency inverse document-frequency values were computed for predictors extracted from the titles and abstracts of articles related to three tumour necrosis factors-alpha blockers. A general automated system was developed using only general predictors and was tested for its generalizability using articles related to four other drug classes. Several specific automated systems were developed using both general and specific predictors and training sets of different sizes in order to determine the minimum number of articles required for developing such systems. Results The general automated system had an area under the curve value of 0.731 and was able to rank 34.6% and 46.2% of the total number of 'useful' articles among the first 10% and 20% of the articles presented to the evaluators when tested on the generalizability set. However, its use may be limited by the subjective definition of useful articles. For the specific automated system, it was found that only 20 articles were required to develop a specific automated system with a prediction performance (AUC 0.748) that was better than that of general automated system. Conclusions Specific automated systems can be developed rapidly and avoid problems caused by subjective definition of useful articles. Thus the efficiency of product risk management can be improved with the use of specific automated systems. PMID:22380483

Overview of the Acoustic Testing of the European Service Module Structural Test Article (E-STA)

NASA Technical Reports Server (NTRS)

Hughes, William; Fogt, Vince; Le Plenier, Cyprien; Duval, Francois; Durand, Jean-Francois; Staab, Lucas D.; Hozman, Aron; Mcnelis, Anne; Bittinger, Samantha; Thirkettle, Anthony;

Overview of the Acoustic Testing of the European Service Module Structural Test Article (E-STA)

NASA Technical Reports Server (NTRS)

Hughes, William; Le Plenier, Cyprien; Duval, Francois; Staab, Lucas; Hozman, Aron; Thirkettle, Anthony; Fogt, Vincent; Durand, Jean-Francois; McNelis, Anne; Bittinger, Samantha;

Learning Potential Tests for Ethnic Minorities.

ERIC Educational Resources Information Center

Hamers, J. H. M.; Pennings, A. H.

1995-01-01

This article presents the results of three studies in the learning-potential testing of children from minority groups: (1) Test of Children's Learning Ability; (2) Learning Efficiency Battery; and (3) Learning Potential Test for Ethnic Minorities. It concludes that, although the development of culture-free tests is impossible, it is possible to…

Development and Results of a First Generation Least Expensive Approach to Fission: Module Tests and Results

NASA Technical Reports Server (NTRS)

Houts, Mike; Godfroy, Tom; Pederson, Kevin; Sena, J. Tom; VanDyke, Melissa; Dickens, Ricky; Reid, Bob J.; Martin, Jim

2000-01-01

The use of resistance heaters to simulate heat from fission allows extensive development of fission systems to be performed in non-nuclear test facilities, saving time and money. Resistance heated tests on the Module Unfueled Thermal-hydraulic Test (MUTT) article has been performed at the Marshall Space Flight Center. This paper discusses the results of these experiments and identifies future tests to be performed.

An enhanced methodology for spacecraft correlation activity using virtual testing tools

NASA Astrophysics Data System (ADS)

Remedia, Marcello; Aglietti, Guglielmo S.; Appolloni, Matteo; Cozzani, Alessandro; Kiley, Andrew

2017-11-01

Test planning and post-test correlation activity have been issues of growing importance in the last few decades and many methodologies have been developed to either quantify or improve the correlation between computational and experimental results. In this article the methodologies established so far are enhanced with the implementation of a recently developed procedure called Virtual Testing. In the context of fixed-base sinusoidal tests (commonly used in the space sector for correlation), there are several factors in the test campaign that affect the behaviour of the satellite and are not normally taken into account when performing analyses: different boundary conditions created by the shaker's own dynamics, non-perfect control system, signal delays etc. All these factors are the core of the Virtual Testing implementation, which will be thoroughly explained in this article and applied to the specific case of Bepi-Colombo spacecraft tested on the ESA QUAD Shaker. Correlation activity will be performed in the various stages of the process, showing important improvements observed after applying the final complete methodology.

Laminar flow control leading edge glove flight test article development

NASA Technical Reports Server (NTRS)

Pearce, W. E.; Mcnay, D. E.; Thelander, J. A.

1984-01-01

A laminar flow control (LFC) flight test article was designed and fabricated to fit into the right leading edge of a JetStar aircraft. The article was designed to attach to the front spar and fill in approx. 70 inches of the leading edge that are normally occupied by the large slipper fuel tank. The outer contour of the test article was constrained to align with an external fairing aft of the front spar which provided a surface pressure distribution over the test region representative of an LFC airfoil. LFC is achieved by applying suction through a finely perforated surface, which removes a small fraction of the boundary layer. The LFC test article has a retractable high lift shield to protect the laminar surface from contamination by airborne debris during takeoff and low altitude operation. The shield is designed to intercept insects and other particles that could otherwise impact the leading edge. Because the shield will intercept freezing rain and ice, a oozing glycol ice protection system is installed on the shield leading edge. In addition to the shield, a liquid freezing point depressant can be sprayed on the back of the shield.

PowerPack Developments

NASA Technical Reports Server (NTRS)

2007-01-01

A vintage 1960 J-2 thrust chamber is fitted with brackets and pumps recently at the Pratt & Whitney Rocketdyne assembly facility in Stennis Space Center's Building 9101. Together, the parts comprise the J-2X Powerpack 1A test article. Mississippi Space Services machined the new bracket (the V-shaped arm on the right), making this the first time parts for an engine test article were machined, welded and assembled on site at SSC.

PowerPack Developments

NASA Image and Video Library

2007-04-11

A vintage 1960 J-2 thrust chamber is fitted with brackets and pumps recently at the Pratt & Whitney Rocketdyne assembly facility in Stennis Space Center's Building 9101. Together, the parts comprise the J-2X Powerpack 1A test article. Mississippi Space Services machined the new bracket (the V-shaped arm on the right), making this the first time parts for an engine test article were machined, welded and assembled on site at SSC.

Teaching beyond the Test: A Method for Designing Test-Preparation Classes

ERIC Educational Resources Information Center

Derrick, Deirdre

2013-01-01

Test-preparation classes that focus on skills will benefit students beyond the test by developing skills they can use at university. This article discusses the purposes of various tests and outlines how to design effective test-prep classes. Several practical activities are included, and an appendix provides information on common standardized…

Ability of finger-jointed lumber to maintain load at elevated temperatures

Treesearch

Douglas R. Rammer; Samuel L. Zelinka; Laura E Hasburgh; Steven T. Craft

2018-01-01

This article presents a test method that was developed to screen adhesive formulations for finger-jointed lumber. The goal was to develop a small-scale test that could be used to predict whether an adhesive would pass a full-scale ASTM E119 wall assembly test. The method involved loading a 38-mm square finger-jointed sample in a four-point bending test inside of an...

Formative Assessment in Teacher Education: The Development of a Diagnostic Language Test for Trainee Teachers of German

ERIC Educational Resources Information Center

Richards, Brian J.

2008-01-01

This article describes the development and validation of a diagnostic test of German and its integration in a programme of formative assessment during a one-year initial teacher-training course. The test focuses on linguistic aspects that cause difficulty for trainee teachers of German as a foreign language and assesses implicit and explicit…

Development of autonomous vehicles’ testing system

NASA Astrophysics Data System (ADS)

Ivanov, A. M.; Shadrin, S. S.

2018-02-01

This article describes overview of automated and, in perspective, autonomous vehicles’ (AV) implementation risks. Set of activities, actual before the use of AVs on public roads, minimizing negative technical and social problems of AVs’ implementation is presented. Classification of vehicle’s automated control systems operating conditions is formulated. Groups of tests for AVs are developed and justified, sequence of AVs’ testing system formation is proposed.

On Shaft Data Acquisition System (OSDAS)

NASA Technical Reports Server (NTRS)

Pedings, Marc; DeHart, Shawn; Formby, Jason; Naumann, Charles

2012-01-01

On Shaft Data Acquisition System (OSDAS) is a rugged, compact, multiple-channel data acquisition computer system that is designed to record data from instrumentation while operating under extreme rotational centrifugal or gravitational acceleration forces. This system, which was developed for the Heritage Fuel Air Turbine Test (HFATT) program, addresses the problem of recording multiple channels of high-sample-rate data on most any rotating test article by mounting the entire acquisition computer onboard with the turbine test article. With the limited availability of slip ring wires for power and communication, OSDAS utilizes its own resources to provide independent power and amplification for each instrument. Since OSDAS utilizes standard PC technology as well as shared code interfaces with the next-generation, real-time health monitoring system (SPARTAA Scalable Parallel Architecture for Real Time Analysis and Acquisition), this system could be expanded beyond its current capabilities, such as providing advanced health monitoring capabilities for the test article. High-conductor-count slip rings are expensive to purchase and maintain, yet only provide a limited number of conductors for routing instrumentation off the article and to a stationary data acquisition system. In addition to being limited to a small number of instruments, slip rings are prone to wear quickly, and introduce noise and other undesirable characteristics to the signal data. This led to the development of a system capable of recording high-density instrumentation, at high sample rates, on the test article itself, all while under extreme rotational stress. OSDAS is a fully functional PC-based system with 48 channels of 24-bit, high-sample-rate input channels, phase synchronized, with an onboard storage capacity of over 1/2-terabyte of solid-state storage. This recording system takes a novel approach to the problem of recording multiple channels of instrumentation, integrated with the test article itself, packaged in a compact/rugged form factor, consuming limited power, all while rotating at high turbine speeds.

Development and Testing of a Scale to Assess Interprofessional Education (IPE) Facilitation Skills

ERIC Educational Resources Information Center

Sargeant, Joan; Hill, Tanya; Breau, Lynn

2010-01-01

Introduction: Interprofessional education (IPE) is interactive and constructivist in nature and requires specific facilitation skills to engage participants in a unique body of content, interpersonal interaction, and learning from each other. This article describes the development and testing of a scale, the Interprofessional Facilitation Scale…

Developing and Testing the Guitar Songleading Performance Scale (GSPS)

ERIC Educational Resources Information Center

Silverman, Michael J.

2011-01-01

Guitar songleading is a critical component in music education and music therapy training curricula. However, at present, there is no standardized instrument to evaluate guitar songleading performance that is both valid and reliable. The purpose of this article is to describe the construction, development, and testing of a guitar songleading…

Development and Validation of the Poverty Attributions Survey

ERIC Educational Resources Information Center

Bennett, Robert M.; Raiz, Lisa; Davis, Tamara S.

2016-01-01

This article describes the process of developing and testing the Poverty Attribution Survey (PAS), a measure of poverty attributions. The PAS is theory based and includes original items as well as items from previously tested poverty attribution instruments. The PAS was electronically administered to a sample of state-licensed professional social…

Involving Students in Developing Math Tests

ERIC Educational Resources Information Center

Rapke, Tina

2017-01-01

Many studies have claimed that traditional testing actually promotes students' use of superficial approaches to learning. When preparing to take tests, students typically memorize and cram rather than understanding the material and gaining new perspectives. This article describes how the author recast traditional tests by having students take a…

Hong Kong Papers in Linguistics and Language Teaching.

ERIC Educational Resources Information Center

Hong Kong Papers in Linguistics and Language Teaching, 1995

1995-01-01

This serial presents articles, reports, and conference reports on various topics concerned with language-related areas, including general linguistics, teaching methodology, curriculum development, testing, evaluation, educational technology, language planning, and bilingual education. Articles in this volume are: (1) "Task Difficulty From the…

Design and Development Comparison of Rapid Cycle Amine 1.0, 2.0, and 3.0

NASA Technical Reports Server (NTRS)

Chullen, Cinda; Campbell, Colin; Papale, William; Murray, Sean; Wichowski, Robert; Conger, Bruce; McMillin, Summer

2016-01-01

The development of the Rapid Cycle Amine (RCA) swing-bed technology for carbon dioxide (CO2) removal has been in progress since favorable results were published in 1996. Shortly thereafter, a prototype was designed, developed, and tested successfully and delivered to Johnson Space Center in 1999. An improved prototype (RCA 1.0) was delivered to NASA in 2006 and sized for the extravehicular activity (EVA). The RCA swing-bed technology is a regenerative system which employs two alternating solid-amine sorbent beds to remove CO2 and water. The two-bed design employs a chemisorption process whereby the beds alternate between adsorption and desorption. This process provides for an efficient RCA operation that enables one bed to be in adsorb (uptake) mode, while the other is in the desorb (regeneration) mode. The RCA has progressed through several iterations of technology readiness levels. Test articles have now been designed, developed, and tested for the advanced space suit portable life support system (PLSS) including RCA 1.0, RCA 2.0, and RCA 3.0. The RCA 3.0 was the most recent RCA fabrication and was delivered to NASA-JSC in June 2015. The RCA 1.0 test article was designed with a pneumatically actuated linear motion spool valve. The RCA 2.0 and 3.0 test articles were designed with a valve assembly which allows for switching between uptake and regeneration modes while minimizing gas volume losses to the vacuum source. RCA 2.0 and 3.0 also include an embedded controller design to control RCA operation and provide the capability of interfacing with various sensors and other ventilation loop components. The RCA technology is low power, small, and has fulfilled all test requirements levied upon the technology during development testing thus far. This paper will provide an overview of the design and development of RCA 1.0, 2.0 and 3.0 including detail differences between the design specifications of each. Nomenclature.

Design and Development Comparison of Rapid Cycle Amine 1.0, 2.0, and 3.0

NASA Technical Reports Server (NTRS)

Chullen, Cinda; Campbell, Colin; Papale, William; Murray, Sean; Wichowski, Robert; Conger, Bruce; McMillin, Summer

2016-01-01

The development of the Rapid Cycle Amine (RCA) swing-bed technology for carbon dioxide (CO2) removal has been in progress since favorable results were published in 1996. Shortly thereafter, a prototype was designed, developed, and tested successfully and delivered to Johnson Space Center in 1999. An improved prototype was delivered to NASA in 2006 and was notated as RCA 1.0 and sized for the extravehicular activity (EVA). The new RCA swing-bed technology is a regenerative system which employs two alternating solid-amine sorbent beds to remove CO2 and water. The two- bed design employs a chemisorption process whereby the beds alternate between adsorbtion and desorbsion. This process provides for an efficient operation of the RCA so that while one bed is in adsorb (uptake) mode, the other is in the desorb (regeneration) mode. The RCA has now progressed through several iterations of technology readiness levels. Test articles have now been designed, developed, and tested for the advanced space suit portable life support system (PLSS) including RCA 1.0, RCA 2.0, and RCA 3.0. The RCA 3.0 was the most recent RCA fabrication and was delivered to NASA-JSC in June 2015. The RCA 1.0 test article was designed with a pneumatically actuated linear motion spool valve. The RCA 2.0 and 3.0 test articles were designed with a valve assembly which allows for switching between uptake and regeneration modes while minimizing gas volume losses to the vacuum source. RCA 2.0 and 3.0 also include an embedded controller design to control RCA operation and provide the capability of interfacing with various sensors and other ventilation loop components. The RCA technology is low power, small, and has fulfilled all test requirements levied upon the technology during development testing thus far. This paper will provide an overreview of the design and development of RCA 1.0, 2.0 and 3.0 including detail differences between the design specifications of each.

Fabrication and Testing of Mo-Re Heat Pipes Embedded in Carbon/Carbon

NASA Technical Reports Server (NTRS)

Glass, David E.; Merrigan, Michael A.; Sena, J. Tom

1998-01-01

Refractory-composite/heat-pipe-cooled wing an tail leading edges are being considered for use on hypersonic vehicles to limit maximum temperatures to values below material reuse limits and to eliminate the need to actively cool the leading edges. The development of a refractory-composite/heat-pipe-cooled leading edge has evolved from the design stage to the fabrication and testing of heat pipes embedded in carbon/carbon (C/C). A three-foot-long, molybdenum-rhenium heat pipe with a lithium working fluid was fabricated and tested at an operating temperature of 2460 F to verify the individual heat-pipe design. Following the fabrication of this heat pipe, three additional heat pipes were fabricated and embedded in C/C. The C/C heat-pipe test article was successfully tested using quartz lamps in a vacuum chamber in both a horizontal and vertical orientation. Start up and steady state data are presented for the C/C heat-pipe test article. Radiography and eddy current evaluations were performed on the test article.

Space Shuttle External Tank Project status

NASA Technical Reports Server (NTRS)

Davis, R. M.

1980-01-01

The External Tank Project is reviewed with emphasis on the DDT&E and production phases and the lightweight tank development. It is noted that the DDT&E phase is progressing well with the structural and ground vibration test article programs complete, the propulsion test article program progressing well, and the component qualification and verification testing 92% complete. New tools and facilities are being brought on line to support the increased build rate for the production phase. The lightweight tank, which will provide additional payload in orbit, is progressing to schedule with first delivery in early 1982.

ME science as mobile learning based on virtual reality

NASA Astrophysics Data System (ADS)

Fradika, H. D.; Surjono, H. D.

2018-04-01

The purpose of this article described about ME Science (Mobile Education Science) as mobile learning application learning of Fisika Inti. ME Science is a product of research and development (R&D) that was using Alessi and Trollip model. Alessi and Trollip model consists three stages that are: (a) planning include analysis of problems, goals, need, and idea of development product, (b) designing includes collecting of materials, designing of material content, creating of story board, evaluating and review product, (c) developing includes development of product, alpha testing, revision of product, validation of product, beta testing, and evaluation of product. The article describes ME Science only to development of product which include development stages. The result of development product has been generates mobile learning application based on virtual reality that can be run on android-based smartphone. These application consist a brief description of learning material, quizzes, video of material summery, and learning material based on virtual reality.

Developing high-quality educational software.

PubMed

Johnson, Lynn A; Schleyer, Titus K L

2003-11-01

The development of effective educational software requires a systematic process executed by a skilled development team. This article describes the core skills required of the development team members for the six phases of successful educational software development. During analysis, the foundation of product development is laid including defining the audience and program goals, determining hardware and software constraints, identifying content resources, and developing management tools. The design phase creates the specifications that describe the user interface, the sequence of events, and the details of the content to be displayed. During development, the pieces of the educational program are assembled. Graphics and other media are created, video and audio scripts written and recorded, the program code created, and support documentation produced. Extensive testing by the development team (alpha testing) and with students (beta testing) is conducted. Carefully planned implementation is most likely to result in a flawless delivery of the educational software and maintenance ensures up-to-date content and software. Due to the importance of the sixth phase, evaluation, we have written a companion article on it that follows this one. The development of a CD-ROM product is described including the development team, a detailed description of the development phases, and the lessons learned from the project.

Development and pilot test of a new set of good practice indicators for chronic non-malignant pain management.

PubMed

Saturno, Pedro Jesus; Angel-García, Daniel; Martínez-Nicolás, Ismael; López Soriano, Francisco; Escolar Reina, Maria Pilar; Guerrero Díaz, María Beatriz; Ros Martínez, María Encarnación; Medina Mirapeix, Francesc; Saturno Marcos, Mayo

2018-06-08

This study was designed to address the current relative void of valid measures by developing evidence-based quality indicators for pain management of chronic non-malignant pain. We performed a 10-year literature search to identify guidelines and review articles on chronic pain management to identify evidence-based recommendations for the different conditions associated to chronic pain. A complementary search of indicators and indicator-related articles was also performed. Then, we built new indicators or adapted existing ones to cover all the evidence-based recommendations we found. The resulting set was pilot-tested for feasibility, reliability (kappa) and usefulness to identify quality problems, using the Lot Quality Acceptance method, α≤0.05 y β≤0.01, for 75% (40% threshold) and 95% (70% threshold) compliance standards, and estimates with binomial exact 95% confidence intervals. The study reviews clinical records from a primary-care centre, a medium-size hospital (250 beds) and a large hospital (500 beds). Forty-six indicators were developed (six general and forty condition-specific). Thirty-three were feasible in primary care and/or hospitals. Feasible indicators were also reliable (most kappa>0.7). Regarding compliance, four quality indicators obtained compliance levels over 60%, addressing pharmacological treatment, multimodal approach and appropriate use of neuro-image tests; while sixteen obtained compliance scores under 15% (six with 0% compliance). The created set has tested to be feasible, reliable, and useful, with the capacity to serve as the baseline for developing the necessary strategies to improve the management of chronic non-malignant pain, by monitoring and evaluating quality of care. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

International English Language Testing: A Critical Response

ERIC Educational Resources Information Center

Hall, Graham

2010-01-01

Uysal's article provides a research agenda for IELTS and lists numerous issues concerning the test's reliability and validity. She asks useful questions, but her analysis ignores the uncertainties inherent in all language test development and the wider social and political context of international high-stakes language testing. In this response, I…

Florida Journal of Communication Disorders, 1998.

ERIC Educational Resources Information Center

Victor, Shelley J., Ed.; Lundy, Donna S., Ed.

1998-01-01

This annual volume is a compilation of research, clinical, and professional articles addressing innovative technology, new diagnostic tests, physiological basis for treatment, and therapeutic ideas in the fields of speech-language pathology and audiology. Featured articles include: (1) "Development of Local Child Norms for the Dichotic Digits…

Modeling and analysis of chill and fill processes for the cryogenic storage and transfer engineering development unit tank

NASA Astrophysics Data System (ADS)

Hedayat, A.; Cartagena, W.; Majumdar, A. K.; LeClair, A. C.

2016-03-01

NASA's future missions may require long-term storage and transfer of cryogenic propellants. The Engineering Development Unit (EDU), a NASA in-house effort supported by both Marshall Space Flight Center (MSFC) and Glenn Research Center, is a cryogenic fluid management (CFM) test article that primarily serves as a manufacturing pathfinder and a risk reduction task for a future CFM payload. The EDU test article comprises a flight-like tank, internal components, insulation, and attachment struts. The EDU is designed to perform integrated passive thermal control performance testing with liquid hydrogen (LH2) in a test-like vacuum environment. A series of tests, with LH2 as a testing fluid, was conducted at Test Stand 300 at MSFC during the summer of 2014. The objective of this effort was to develop a thermal/fluid model for evaluating the thermodynamic behavior of the EDU tank during the chill and fill processes. The Generalized Fluid System Simulation Program, an MSFC in-house general-purpose computer program for flow network analysis, was utilized to model and simulate the chill and fill portion of the testing. The model contained the LH2 supply source, feed system, EDU tank, and vent system. The test setup, modeling description, and comparison of model predictions with the test data are presented.

Vertical Drop Testing and Analysis of the Wasp Helicopter Skid Gear

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fuchs, Yvonne T.

2007-01-01

This report describes an experimental program to assess the impact performance of a skid gear for use on the Wasp kit-built helicopter, which is marketed by HeloWerks, Inc. of Hampton, Virginia. In total, five vertical drop tests were performed. The test article consisted of a skid gear mounted beneath a steel plate. A seating platform was attached to the upper surface of the steel plate, and two 95th percentile Hybrid III male Anthropomorphic Test Devices (ATDs) were seated on the platform and secured using a four-point restraint system. The test article also included ballast weights to ensure the correct position of the Center-of-Gravity (CG). Twenty-six channels of acceleration data were collected per test at 50,000 samples per second. The five drop tests were conducted on two different gear configurations. The details of these test programs are presented, as well as an occupant injury assessment. Finally, a finite element model of the skid gear test article was developed for execution in LS-DYNA, an explicit nonlinear transient dynamic code, for predicting the skid gear and occupant dynamic responses due to impact.

Radial-piston pump for drive of test machines

NASA Astrophysics Data System (ADS)

Nizhegorodov, A. I.; Gavrilin, A. N.; Moyzes, B. B.; Cherkasov, A. I.; Zharkevich, O. M.; Zhetessova, G. S.; Savelyeva, N. A.

2018-01-01

The article reviews the development of radial-piston pump with phase control and alternating-flow mode for seismic-testing platforms and other test machines. The prospects for use of the developed device are proved. It is noted that the method of frequency modulation with the detection of the natural frequencies is easily realized by using the radial-piston pump. The prospects of further research are given proof.

Recent Developments in Language Assessment and the Case of Four Large-Scale Tests of ESOL Ability

ERIC Educational Resources Information Center

Stoynoff, Stephen

2009-01-01

This review article surveys recent developments and validation activities related to four large-scale tests of L2 English ability: the iBT TOEFL, the IELTS, the FCE, and the TOEIC. In addition to describing recent changes to these tests, the paper reports on validation activities that were conducted on the measures. The results of this research…

Qualifying Spirit and Opportunity to Martian Landing Loads with Centrifuge Testing

NASA Technical Reports Server (NTRS)

Coleman, Michelle R.; Davis, Greg

2004-01-01

This viewgraph presentation reviews the drop test used to test the Mars lander. The objective of the test was to demonstrate the structural and functional integrity of the development test Model (DTM). Rover Basepetal when subjected to the landing event. The test module was instrumented with accelerometers to measure the kinematic response of the test article during impact.

Titanium Honeycomb Panel Testing

NASA Technical Reports Server (NTRS)

Richards, W. Lance; Thompson, Randolph C.

1996-01-01

Thermal-mechanical tests were performed on a titanium honeycomb sandwich panel to experimentally validate the hypersonic wing panel concept and compare test data with analysis. Details of the test article, test fixture development, instrumentation, and test results are presented. After extensive testing to 900 deg. F, non-destructive evaluation of the panel has not detected any significant structural degradation caused by the applied thermal-mechanical loads.

A new approach for performing contamination control bakeouts in JPL thermal vacuum test chambers

NASA Technical Reports Server (NTRS)

Johnson, Kenneth R.; Taylor, Daniel M.; Lane, Robert W.; Cortez, Maximo G.; Anderson, Mark R.

1992-01-01

Contamination control requirements for the Wide Field/Planetary Camera II (WF/PC II) are necessarily stringent to protect against post-launch contamination of the sensitive optical surfaces, particularly the cold charge coupled device (CCD) imaging surfaces. Typically, thermal vacuum test chambers have employed a liquid nitrogen (LN2) cold trap to collect outgassed contaminants. This approach has the disadvantage of risking recontamination of the test article from shroud offgassing during post-test warmup of the chamber or from any shroud warming of even a few degrees during the bakeout process. By using an enclave, essentially a chamber within a chamber, configured concentrically and internally within an LN2 shroud, a method was developed, based on a design concept by Taylor, for preventing recontamination of test articles during bakeouts and subsequent post-test warmup of the vacuum chamber. Enclaves for testing WF/PC II components were designed and fabricated, then installed in three of JPL's Environmental Test Lab chambers. The design concepts, operating procedures, and test results of this development are discussed.

The Textevaluator Tool: Helping Teachers and Test Developers Select Texts for Use in Instruction and Assessment

ERIC Educational Resources Information Center

Sheehan, Kathleen M.; Kostin, Irene; Napolitano, Diane; Flor, Michael

2014-01-01

This article describes TextEvaluator, a comprehensive text-analysis system designed to help teachers, textbook publishers, test developers, and literacy researchers select reading materials that are consistent with the text complexity goals outlined in the Common Core State Standards. Three particular aspects of the TextEvaluator measurement…

Developing and Validating Proof Comprehension Tests in Undergraduate Mathematics

ERIC Educational Resources Information Center

Mejía-Ramos, Juan Pablo; Lew, Kristen; de la Torre, Jimmy; Weber, Keith

2017-01-01

In this article, we describe and illustrate the process by which we developed and validated short, multiple-choice, reliable tests to assess undergraduate students' comprehension of three mathematical proofs. We discuss the purpose for each stage and how it benefited the design of our instruments. We also suggest ways in which this process could…

The Development and Test of the Public Speaking Competence Rubric

ERIC Educational Resources Information Center

Schreiber, Lisa M.; Paul, Gregory D.; Shibley, Lisa R.

2012-01-01

In response to the demand for increased accountability within the university classroom, there have been calls for a new generation of rubrics that effectively assess students' competence in several areas, including public speaking. This article describes the development, test, and factor analyses of the Public Speaking Competence Rubric (PSCR), an…

Helping Lower Secondary Students Develop Conceptual Understanding of Electrostatic Forces

ERIC Educational Resources Information Center

Moynihan, Richard; van Kampen, Paul; Finlayson, Odilla; McLoughlin, Eilish

2016-01-01

This article describes the development of a lesson sequence that supports secondary-level students to construct an explanatory model for electrostatic attraction using a guided enquiry method. The students examine electrostatic interactions at a macro level and explain the phenomena at the atomic level. Pre-tests, post-tests, homework assignments…

Using Logistic Approximations of Marginal Trace Lines to Develop Short Assessments

ERIC Educational Resources Information Center

Stucky, Brian D.; Thissen, David; Edelen, Maria Orlando

2013-01-01

Test developers often need to create unidimensional scales from multidimensional data. For item analysis, "marginal trace lines" capture the relation with the general dimension while accounting for nuisance dimensions and may prove to be a useful technique for creating short-form tests. This article describes the computations needed to obtain…

Scoping review of response shift methods: current reporting practices and recommendations.

PubMed

Sajobi, Tolulope T; Brahmbatt, Ronak; Lix, Lisa M; Zumbo, Bruno D; Sawatzky, Richard

2018-05-01

Response shift (RS) has been defined as a change in the meaning of an individual's self-evaluation of his/her health status and quality of life. Several statistical model- and design-based methods have been developed to test for RS in longitudinal data. We reviewed the uptake of these methods in patient-reported outcomes (PRO) literature. CINHAHL, EMBASE, Medline, ProQuest, PsycINFO, and Web of Science were searched to identify English-language articles about RS published until 2016. Data on year and country of publication, PRO measure adopted, RS detection method, type of RS detected, and testing of underlying model assumptions were extracted from the included articles. Of the 1032 articles identified, 101 (9.8%) articles were included in the study. While 54.5 of the articles reported on the Then-test, 30.7% of the articles reported on Oort's or Schmitt's structural equation modeling (SEM) procedure. Newer RS detection methods, such as relative importance analysis and random forest regression, have been used less frequently. Less than 25% reported on testing the assumptions underlying the adopted RS detection method(s). Despite rapid methodological advancements in RS research, this review highlights the need for further research about RS detection methods for complex longitudinal data and standardized reporting guidelines.

Legal Forum: Drug Testing in Public Schools.

ERIC Educational Resources Information Center

White, Janet M; Thomas, Stephen B.

1987-01-01

This article reviews court decisions concerning drug testing among prisoners, military personnel, public employees, and school employees. Fourth Amendment considerations of unreasonable search and seizure are discussed. In developing drug testing policies school districts must review these decisions in order to both protect individual rights and…

Correlation Results for a Mass Loaded Vehicle Panel Test Article Finite Element Models and Modal Survey Tests

NASA Technical Reports Server (NTRS)

Maasha, Rumaasha; Towner, Robert L.

2012-01-01

High-fidelity Finite Element Models (FEMs) were developed to support a recent test program at Marshall Space Flight Center (MSFC). The FEMs correspond to test articles used for a series of acoustic tests. Modal survey tests were used to validate the FEMs for five acoustic tests (a bare panel and four different mass-loaded panel configurations). An additional modal survey test was performed on the empty test fixture (orthogrid panel mounting fixture, between the reverb and anechoic chambers). Modal survey tests were used to test-validate the dynamic characteristics of FEMs used for acoustic test excitation. Modal survey testing and subsequent model correlation has validated the natural frequencies and mode shapes of the FEMs. The modal survey test results provide a basis for the analysis models used for acoustic loading response test and analysis comparisons

Grading evidence from test accuracy studies: what makes it challenging compared with the grading of effectiveness studies?

PubMed

Rogozińska, Ewelina; Khan, Khalid

2017-06-01

Guideline panels need to process a sizeable amount of information to issue a decision on whether to recommend a health technology or not. Grading of Recommendations Assessment, Development, and Evaluation (GRADE) is being frequently applied in guideline development to facilitate this task, typically for the synthesis of effectiveness research. Questions regarding the accuracy of medical tests are ubiquitous, and they temporally precede questions about therapy. However, literature summarising the experience of applying GRADE approach to accuracy evaluations is not as rich as one for effectiveness evidence. Type of study design (cross-sectional), two-dimensional nature of the performance measures (sensitivity and specificity), propensity towards a higher level of between-study heterogeneity, poor reporting of quality features and uncertainty about how best to assess for publication bias among other features make this task challenging. This article presents solutions adopted to addresses above challenges for judicious estimation of the strength of test accuracy evidence used to inform evidence syntheses for guideline development. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Direct-to-Consumer Genetic Testing and Orphan Drug Development.

PubMed

Mason, Matthew; Levenson, James; Quillin, John

2017-08-01

Since the introduction of the Orphan Drug Act (ODA) in 1983, orphan drug approvals in the United States have jumped from <100 per decade to over 200 per year. This growth is widely attributed to the financial incentives the ODA gives to companies that develop these medicines, and it is likely to continue for a unique reason: partnerships between pharmaceutical firms and direct-to-consumer (DTC) genetic testing companies. This emerging trend is the subject of this article, which begins by considering how rare-disease drugs are regulated and the rising interest in nonclinical genetic testing. It then outlines how DTC companies analyze DNA and how their techniques benefit researchers and drug developers. Then, after an overview of the current partnerships between DTCs and drug developers, it examines concerns about privacy and cost brought up by these partnerships. The article concludes by contrasting the enormous positive potential of DTC-pharma relationships and their concomitant dangers, especially to consumer privacy and cost to the healthcare system.

Mathematics Placement Test: Typical Results with Unexpected Outcomes

ERIC Educational Resources Information Center

Ingalls, Victoria

2011-01-01

Based on the results of a prior case-study analysis of mathematics placement at one university, the mathematics department developed and piloted a mathematics placement test. This article describes the implementation process for a mathematics placement test and further analyzes the test results for the pilot group. As an unexpected result, the…

Computer-Based English Language Testing in China: Present and Future

ERIC Educational Resources Information Center

Yu, Guoxing; Zhang, Jing

2017-01-01

In this special issue on high-stakes English language testing in China, the two articles on computer-based testing (Jin & Yan; He & Min) highlight a number of consistent, ongoing challenges and concerns in the development and implementation of the nationwide IB-CET (Internet Based College English Test) and institutional computer-adaptive…

CFD Simulations for Arc-Jet Panel Testing Capability Development Using Semi-Elliptical Nozzles

NASA Technical Reports Server (NTRS)

Gokcen, Tahir; Balboni, John A.; Hartman, G. Joseph

2016-01-01

This paper reports computational simulations in support of arc-jet panel testing capability development using semi-elliptical nozzles in a high enthalpy arc-jet facility at NASA Ames Research Center. Two different semi-elliptical nozzle configurations are proposed for testing panel test articles. Computational fluid dynamics simulations are performed to provide estimates of achievable panel surface conditions and useful test area for each configuration. The present analysis comprises three-dimensional simulations of the nonequilibrium flowfields in the semi-elliptical nozzles, test box and flowfield over the panel test articles. Computations show that useful test areas for the proposed two nozzle options are 20.32 centimeters by 20.32 centimeters (8 inches by 8 inches) and 43.18 centimeters by 43.18 centimeters (17 inches by 17 inches). Estimated values of the maximum cold-wall heat flux and surface pressure are 155 watts per centimeters squared and 39 kilopascals for the smaller panel test option, and 44 watts per centimeters squared and 7 kilopascals for the larger panel test option. Other important properties of the predicted flowfields are presented, and factors that limit the useful test area in the semi-free jet test configuration are discussed.

Development of Cardiovascular and Neurodevelopmental Metrics as Sublethal Endpoints for the Fish Embryo Toxicity Test.

PubMed

Krzykwa, Julie C; Olivas, Alexis; Jeffries, Marlo K Sellin

2018-06-19

The fathead minnow fish embryo toxicity (FET) test has been proposed as a more humane alternative to current toxicity testing methods, as younger organisms are thought to experience less distress during toxicant exposure. However, the FET test protocol does not include endpoints that allow for the prediction of sublethal adverse outcomes, limiting its utility relative to other test types. Researchers have proposed the development of sublethal endpoints for the FET test to increase its utility. The present study 1) developed methods for previously unmeasured sublethal metrics in fathead minnows (i.e., spontaneous contraction frequency and heart rate) and 2) investigated the responsiveness of several sublethal endpoints related to growth (wet weight, length, and growth-related gene expression), neurodevelopment (spontaneous contraction frequency, and neurodevelopmental gene expression), and cardiovascular function and development (pericardial area, eye size and cardiovascular related gene expression) as additional FET test metrics using the model toxicant 3,4-dichloroaniline. Of the growth, neurological and cardiovascular endpoints measured, length, eye size and pericardial area were found to more responsive than the other endpoints, respectively. Future studies linking alterations in these endpoints to longer-term adverse impacts are needed to fully evaluate the predictive power of these metrics in chemical and whole effluent toxicity testing. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Modelling cognitive affective biases in major depressive disorder using rodents

PubMed Central

Hales, Claire A; Stuart, Sarah A; Anderson, Michael H; Robinson, Emma S J

2014-01-01

Major depressive disorder (MDD) affects more than 10% of the population, although our understanding of the underlying aetiology of the disease and how antidepressant drugs act to remediate symptoms is limited. Major obstacles include the lack of availability of good animal models that replicate aspects of the phenotype and tests to assay depression-like behaviour in non-human species. To date, research in rodents has been dominated by two types of assays designed to test for depression-like behaviour: behavioural despair tests, such as the forced swim test, and measures of anhedonia, such as the sucrose preference test. These tests have shown relatively good predictive validity in terms of antidepressant efficacy, but have limited translational validity. Recent developments in clinical research have revealed that cognitive affective biases (CABs) are a key feature of MDD. Through the development of neuropsychological tests to provide objective measures of CAB in humans, we have the opportunity to use ‘reverse translation’ to develop and evaluate whether similar methods are suitable for research into MDD using animals. The first example of this approach was reported in 2004 where rodents in a putative negative affective state were shown to exhibit pessimistic choices in a judgement bias task. Subsequent work in both judgement bias tests and a novel affective bias task suggest that these types of assay may provide translational methods for studying MDD using animals. This review considers recent work in this area and the pharmacological and translational validity of these new animal models of CABs. Linked Articles This article is part of a themed section on Animal Models in Psychiatry Research. To view the other articles in this section visit http://dx.doi.org/10.1111/bph.2014.171.issue-20 PMID:24467454

Evaluating the implementation and impacts of middle grades inquiry-based engineering design modules

NASA Astrophysics Data System (ADS)

Harlan, Jessica M.

This dissertation uses a format where I present and discuss three articles that were written in conjunction with my work on a research and evaluation team. The articles are based on a multi-year project researching and evaluating the design, development, and implementation of a middle grades integrated Science, Technology, Engineering, and Mathematics (STEM) program. Each of the articles demonstrates the complexity in researching and evaluating curricular development in multifaceted, rapidly changing environments. While the focus of each article differs, they all examine research and evaluation in the context of the design and development of middle grades engineering-design modules. The selected articles address challenges associated with assessing program objectives and evaluating program quality in complex education programs.The first article, presented in Chapter 2, provides an overview of the nature of the EYE program and examines the extent to which participation in the EYE program resulted in the achievement of program objectives. There is evidence that EYE Module participation has a positive impact on participating students as well as teachers. This study also revealed challenges associated with determining the impact of program participation simultaneously with program revisions and assessment development. The second article, presented in Chapter 3, examined the evaluation of fidelity of implementation of inquiry-oriented educational programs. This article was intended to examine one way of triangulating information to determine fidelity while considering variation in implementation consistent with program theories of learning. When applying this model to implementation of the EYE program, we found many teachers were implementing the modules with low to moderate fidelity, especially math teachers. The third article, presented in Chapter 4, examined the factor structure of an occupational values scale intended to measure student interest in STEM careers. When reviewing the assessment's evidence base, we found no published literature regarding the assessment's psychometric properties. We found that the AWE Work Values scale assesses two separate sets of occupational values: 1) using analytical and problem solving skills and 2) personal satisfaction. In Chapter 5, I discuss the implications of the research presented in these articles to the field of integrated STEM. This includes a need to further develop and test tools and methods for measuring program impact. While the articles address several issues related to research and evaluation within the context of K-12 integrated STEM education, the concepts and implications also apply to the general field of instructional design. The primary lesson is the need to systematically evaluate designed instruction, including measuring fidelity of implementation and designing evaluations in advance to ensure appropriate data are gathered. Recommendations for future research include identification of common outcomes for integrated STEM, psychometric testing of integrated STEM attitude measures, impacts of other factors such as interest in STEM, and development and testing of instructional design models for integrated STEM.

Benchmark Tests for Stirling Convertor Heater Head Life Assessment Conducted

NASA Technical Reports Server (NTRS)

Krause, David L.; Halford, Gary R.; Bowman, Randy R.

2004-01-01

A new in-house test capability has been developed at the NASA Glenn Research Center, where a critical component of the Stirling Radioisotope Generator (SRG) is undergoing extensive testing to aid the development of analytical life prediction methodology and to experimentally aid in verification of the flight-design component's life. The new facility includes two test rigs that are performing creep testing of the SRG heater head pressure vessel test articles at design temperature and with wall stresses ranging from operating level to seven times that (see the following photograph).

Using Quality Management Systems to Improve Test Development and Standards and to Promote Good Practice: A Case Study of Testing Italian as a Foreign Language

ERIC Educational Resources Information Center

Grego Bolli, Giuliana

2014-01-01

This article discusses the problem of quality in the production of language tests in the context of Italian language examinations. The concept of quality is closely related to the application of stated standards and related procedures. These standards, developed over the last thirty years, are mainly related to the concepts of the accountability…

Non-Invasive Tension Measurement Devices for Parachute Cordage

NASA Technical Reports Server (NTRS)

Litteken, Douglas A.; Daum, Jared S.

2016-01-01

The need for lightweight and non-intrusive tension measurements has arisen alongside the development of high-fidelity computer models of textile and fluid dynamics. In order to validate these computer models, data must be gathered in the operational environment without altering the design, construction, or performance of the test article. Current measurement device designs rely on severing a cord and breaking the load path to introduce a load cell. These load cells are very reliable, but introduce an area of high stiffness in the load path, directly affecting the structural response, adding excessive weight, and possibly altering the dynamics of the parachute during a test. To capture the required data for analysis validation without affecting the response of the system, non-invasive measurement devices have been developed and tested by NASA. These tension measurement devices offer minimal impact to the mass, form, fit, and function of the test article, while providing reliable, axial tension measurements for parachute cordage.

A Tangled Path: Negotiating Leadership for, in, of, and with Diverse Communities

ERIC Educational Resources Information Center

Goddard, J. Tim

2015-01-01

This article addresses issues of educational leadership in postcolonial and post-conflict environments. The focus relates to large-scale testing protocols, diversity in schools, asset-based community development, and communications technology. The article highlights the importance of context to the tenets of social justice, equitable human…

Educational Game Systems in Artificial Intelligence Course

ERIC Educational Resources Information Center

Chubarkova, Elena V.; Sadchikov, Ilya A.; Suslova, Irina A.; Tsaregorodtsev, Andrey ?.; Milova, Larisa N.

2016-01-01

Article actuality based on fact that existing knowledge system aimed at future professional life of students: a skillful use game activity in educational process will teach students to look for alternative ways solving of real problems. The purpose of article lies in theoretical substantiation, development and testing of criteria, which must be…

Using a Research Article to Foster Moral Reflection and Global Awareness in Teaching about Religion and Politics, Theory Testing, and Democracy in the Muslim World

ERIC Educational Resources Information Center

Davis, Nancy J.; Robinson, Robert V.

2006-01-01

Encouraging students to reflect on their ethical principles and to develop a global outlook have been identified as key pedagogical goals in recent national reports on higher education. This article shows how instructors can use a current article from the "American Sociological Review (ASR)" to facilitate moral reflection and global awareness. The…

Manned remote work station development article. Volume 2: Simulation requirements. Appendix A: Open cherry picker development test articles specification

NASA Technical Reports Server (NTRS)

1979-01-01

A manned remote work station (MRWS) mission scenario, broken down into the three time phases was selected as the basis for analysis of the MRWS flight article requirements and concepts. The mission roles for the three time phases, supporting tradeoff and evaluation studies, was used to identify key issues requiring simulation. The MRWS is discussed in terms of its capability to perform such operations as support of Spacelab experiments, servicing and repair of satellites, and construction. Future considerations for the use of the MRWS are also given.

Reusable LH2 tank technology demonstration through ground test

NASA Technical Reports Server (NTRS)

Bianca, C.; Greenberg, H. S.; Johnson, S. E.

1995-01-01

The paper presents the project plan to demonstrate, by March 1997, the reusability of an integrated composite LH2 tank structure, cryogenic insulation, and thermal protection system (TPS). The plan includes establishment of design requirements and a comprehensive trade study to select the most suitable Reusable Hydrogen Composite Tank system (RHCTS) within the most suitable of 4 candidate structural configurations. The 4 vehicles are winged body with the capability to deliver 25,000 lbs of payload to a circular 220 nm, 51.6 degree inclined orbit (also 40,000 lbs to a 28.5 inclined 150 nm orbit). A prototype design of the selected RHCTS is established to identify the construction, fabrication, and stress simulation and test requirements necessary in an 8 foot diameter tank structure/insulation/TPS test article. A comprehensive development test program supports the 8 foot test article development and involves the composite tank itself, cryogenic insulation, and integrated tank/insulation/TPS designs. The 8 foot diameter tank will contain the integrated cryogenic insulation and TPS designs resulting from this development and that of the concurrent lightweight durable TPS program. Tank ground testing will include 330 cycles of LH2 filling, pressurization, body loading, depressurization, draining, and entry heating.

[The requirements of standard and conditions of interchangeability of medical articles].

PubMed

Men'shikov, V V; Lukicheva, T I

2013-11-01

The article deals with possibility to apply specific approaches under evaluation of interchangeability of medical articles for laboratory analysis. The development of standardized analytical technologies of laboratory medicine and formulation of requirements of standards addressed to manufacturers of medical articles the clinically validated requirements are to be followed. These requirements include sensitivity and specificity of techniques, accuracy and precision of research results, stability of reagents' quality in particular conditions of their transportation and storage. The validity of requirements formulated in standards and addressed to manufacturers of medical articles can be proved using reference system, which includes master forms and standard samples, reference techniques and reference laboratories. This approach is supported by data of evaluation of testing systems for measurement of level of thyrotrophic hormone, thyroid hormones and glycated hemoglobin HB A1c. The versions of testing systems can be considered as interchangeable only in case of results corresponding to the results of reference technique and comparable with them. In case of absence of functioning reference system the possibilities of the Joined committee of traceability in laboratory medicine make it possible for manufacturers of reagent sets to apply the certified reference materials under development of manufacturing of sets for large listing of analytes.

Assessing Personality and Mood With Adjective Check List Methodology: A Review

ERIC Educational Resources Information Center

Craig, Robert J.

2005-01-01

This article addresses the benefits and problems in using adjective check list methodology to assess personality. Recent developments in this assessment method are reviewed, emphasizing seminal adjective-based personality tests (Gough's Adjective Check List), mood tests (Lubin's Depressive Adjective Test, Multiple Affect Adjective Check List),…

"Tackling Test Anxiety": A Group for College Students

ERIC Educational Resources Information Center

Damer, Diana E.; Melendres, Lauren T.

2011-01-01

Test anxiety is ubiquitous on college campuses and negatively impacts academic progress as well as overall mental and physical health. Some students develop test anxiety due to poor study skills, while others experience debilitating anxiety despite adequate preparation. In this article, a session-by-session description of a 4-week group…

Development of structural test articles from magnesium-lithium and beryllium

NASA Technical Reports Server (NTRS)

Alario, R.

1969-01-01

Study on the fabrication and testing of a magnesium-lithium box beam shows the formability and machinability characteristics of that alloy to be excellent. Results of forming tests for shrink and stretch flanges show values for both flange heights that may be used in future beryllium design.

Credit Building in IDA Programs: Early Findings of a Longitudinal Study

ERIC Educational Resources Information Center

Birkenmaier, Julie; Curley, Jami; Kelly, Patrick

2012-01-01

Objective: This article reports on the impact of the Individual Development Account (IDA) program on credit. Method: Using a convenience sample of IDA participants (N = 165), data were analyzed using paired sample "t" tests, independent sample "t" test, one-way analysis of variance, Mann-Whitney "U" Tests, and…

Robotic Lunar Lander Development Project Status

NASA Technical Reports Server (NTRS)

Hammond, Monica; Bassler, Julie; Morse, Brian

2010-01-01

This slide presentation reviews the status of the development of a robotic lunar lander. The goal of the project is to perform engineering tests and risk reduction activities to support the development of a small lunar lander for lunar surface science. This includes: (1) risk reduction for the flight of the robotic lander, (i.e., testing and analyzing various phase of the project); (2) the incremental development for the design of the robotic lander, which is to demonstrate autonomous, controlled descent and landing on airless bodies, and design of thruster configuration for 1/6th of the gravity of earth; (3) cold gas test article in flight demonstration testing; (4) warm gas testing of the robotic lander design; (5) develop and test landing algorithms; (6) validate the algorithms through analysis and test; and (7) tests of the flight propulsion system.

EVALUATING SOURCES OF INDOOR AIR POLLUTION

EPA Science Inventory

The article discusses a three-phase approach, employing environmental chambers, indoor air quality (IAQ) models, and test house experiments, that is effective in linking sources of indoor pollutants to measured concentrations. mission factors developed in test chambers can be use...

Test development and use in five Iberian Latin American countries.

PubMed

Wechsler, Solange M; Oakland, Thomas; León, Carmem; Vivas, Eleonora; de Almeida, Leandro; Franco, Amanda; Pérez-Solís, María; Contini, Norma

2014-08-01

The abundance of scholarship on test development and use generally is higher in English-speaking than in Iberian Latin American countries. The purpose of this article is to help overcome this imbalance by describing and identifying similarities and differences in test development and use in two Iberian (Portugal and Spain) and three of the largest Latin American (Argentina, Brazil, and Venezuela) countries. The stages of test development in each country, roles of professional associations, presence of standards for test use, professionals' educational training, commonly used tests, together with prominent challenges to continued progress are discussed. Test development and use in these five countries are transitioning from a dependence on the use of translated tests to greater reliance on adapted and finally nationally constructed tests. Continued growth requires adherence to international standards guiding test development and use. Stronger alliance among professional associations in the Iberian Latin American countries could serve as a catalyst to promote test development in these regions. © 2014 International Union of Psychological Science.

STS-48 ESC image of the MODE-01 Fluid Test Article (FTA) on OV-103's middeck

NASA Technical Reports Server (NTRS)

1991-01-01

An electronic still camera (ESC) closeup shows the STS-48 Middeck Zero ('0') Gravity Dynamics Experiment 01 (MODE-01) Fluid Test Article (FTA) attached to an experimental support module (ESM) located in a forward middeck locker onboard the earth-orbiting Discovery, Orbiter Vehicle (OV) 103. The FTA is a 3.1-cm diameter cylindrical sealed Lexan tank. The FTA electromagnetic actuator has excited the test article sinusoidally, which causes the fluid inside the tank to slosh. These slosh forces, along with other data such as acceleration levels of the entire assembly, are measured by the force balance and recorded in digital form on an optical disk for later ground analysis. Crewmembers were testing the ESC as part of Development Test Objective (DTO) 648, Electronic Still Photography. The digital image was stored on a removable hard disk or small optical disk, and could be converted to a format suitable for downlink transmission. The ESC is making its initial appearance on this Space Shutt

Design of Test Articles and Monitoring System for the Characterization of HIRF Effects on a Fault-Tolerant Computer Communication System

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo; Malekpour, Mahyar R.; Miner, Paul S.; Koppen, Sandra V.

2008-01-01

This report describes the design of the test articles and monitoring systems developed to characterize the response of a fault-tolerant computer communication system when stressed beyond the theoretical limits for guaranteed correct performance. A high-intensity radiated electromagnetic field (HIRF) environment was selected as the means of injecting faults, as such environments are known to have the potential to cause arbitrary and coincident common-mode fault manifestations that can overwhelm redundancy management mechanisms. The monitors generate stimuli for the systems-under-test (SUTs) and collect data in real-time on the internal state and the response at the external interfaces. A real-time health assessment capability was developed to support the automation of the test. A detailed description of the nature and structure of the collected data is included. The goal of the report is to provide insight into the design and operation of these systems, and to serve as a reference document for use in post-test analyses.

GO1 Inert Test Article Captive Carry

NASA Image and Video Library

2018-01-10

Generation Orbit Launch Services, Inc. (GO) completed the GO1 Inert Test Article captive carry flight test at NASA’s Armstrong Flight Research Center in December. Under a public-private partnership with NASA, GO developed the GO1-ITA, a mass properties and outer mold line simulator for the GO1 hypersonic flight testbed and earned NASA airworthiness approval for flight on NASA’s C-20a. NASA’s C-20a was originally modified to add a centerline hard point to carry the Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) pod. Together with the NASA Armstrong team, a campaign of three flight tests was conducted, successfully completing all test objectives including clearing the operational flight envelope of the C-20a with the GO1-ITA mounted to the centerline hard point, and demonstrated the unique launch maneuver designed for air launch of the GO1 on operational flights starting in 2019. Data collected during the campaign will be used to validate models and inform the ongoing design and development of GO1.

Design and Fabrication of a Stirling Thermal Vacuum Test

NASA Technical Reports Server (NTRS)

Oriti, Salvatore M.; Schreiber, Jeffrey G.

2004-01-01

A Stirling Radioisotope Generator (SRG110) is being developed for potential use on future NASA space science missions. The development effort is being conducted by Lockheed Martin under contract to the Department of Energy (DOE). The Stirling Technology Company supplies the free-piston Stirling power convertors, and NASA Glenn Research Center (GRC) provides support to the effort in a range of technologies. This generator features higher efficiency and specific power compared to the currently used alternatives. One potential application for the generator would entail significant cruise time in the vacuum of deep space. A test has been conceived at GRC to demonstrate functionality of the Stirling convertors in a thermal vacuum environment. The test article resembles the configuration of the SRG, however the requirement for low mass was not considered. This test will demonstrate the operation of the Stirling convertors in the thermal vacuum environment, simulating deep space, over an extended period of operation. The analysis, design, and fabrication of the test article will be described in this paper.

Testing and Evaluation of Passive Radiation Detection Equipment for Homeland Security

DOE PAGES

West, David L.; Wood, Nathan L.; Forrester, Christina D.

2017-12-01

This article is concerned with test and evaluation methods for passive radiation detection equipment used in homeland security applications. The different types of equipment used in these applications are briefly reviewed and then test and evaluation methods discussed. The primary emphasis is on the test and evaluation standards developed by the American National Standards Institute’s N42 committees. Commonalities among the standards are then reviewed as well as examples of unique aspects for specific equipment types. Throughout, sample test configurations and results from testing and evaluation at Oak Ridge National Laboratory are given. The article concludes with a brief discussion ofmore » typical tests and evaluations not covered by the N42 standards and some examples of test and evaluation that involve the end users of the equipment.« less

Testing and Evaluation of Passive Radiation Detection Equipment for Homeland Security

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, David L.; Wood, Nathan L.; Forrester, Christina D.

This article is concerned with test and evaluation methods for passive radiation detection equipment used in homeland security applications. The different types of equipment used in these applications are briefly reviewed and then test and evaluation methods discussed. The primary emphasis is on the test and evaluation standards developed by the American National Standards Institute’s N42 committees. Commonalities among the standards are then reviewed as well as examples of unique aspects for specific equipment types. Throughout, sample test configurations and results from testing and evaluation at Oak Ridge National Laboratory are given. The article concludes with a brief discussion ofmore » typical tests and evaluations not covered by the N42 standards and some examples of test and evaluation that involve the end users of the equipment.« less

Advanced manufacturing development of a composite empennage component for L-1011 aircraft. Phase 4: Full scale ground test

NASA Technical Reports Server (NTRS)

Jackson, A. C.; Dorwald, F.

1982-01-01

The ground tests conducted on the advanced composite vertical fin (ACVF) program are described. The design and fabrication of the test fixture and the transition structure, static test of Ground Test Article (GTA) No. 1, rework of GTA No. 2, and static, damage tolerance, fail-safe and residual strength tests of GTA No. 2 are described.

NASA's Space Launch System: Progress Report

NASA Technical Reports Server (NTRS)

Cook, Jerry; Lyles, Garry

2017-01-01

NASA and its commercial industry team achieved significant progress in 2016 in manufacturing and testing of the Block 1 vehicle for the first launch of the Space Launch System (SLS). Test and flight article hardware for the liquid hydrogen fuel tank as well as the engine section for the core stage were completed at Michoud Assembly Facility (MAF) in New Orleans. Test stands neared completion at Marshall Space Flight Center for the propellant tanks, engine section, intertank and payload section. Stennis Space Center completed major structural renovations on the B2 test stand, where the core stage "green run" test program will be conducted. The SLS team completed a hotfire test series at Stennis to successfully demonstrate the ability of the RS-25 engine to operate under SLS environments and performance conditions. The team also test fired the second qualification five-segment solid rocket motor and cast the first six motor segments for the first SLS mission. The Interim Cryogenic Propulsion Stage (ICPS) test article was delivered to Marshall for structural tests, and work is nearly finished on the flight stage. Flight software testing completed at Marshall included power quality and command and data handling. In 2017, that work continues. SLS completed Preliminary Design Review (PDR) on the Exploration Upper Stage (EUS), a powerful, human-rated spacecraft that will propel explorers to cis-lunar space. In 2017, hardware will continue to be integrated at MAF for core stage structural test articles and the first two operational flights. RS-25 hotfire testing will continue to explore engine performance, as well as test flight-like software and four new Engine Controller Units (ECUs) for the first mission. Production of development components for a more affordable RS-25 design is underway. Core stage structural test articles have begun arriving at Marshall. While engineering challenges typical of a new development are possible, SLS is working toward launch readiness in late 2018. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before first flight

A wall interference assessment/correction system

NASA Technical Reports Server (NTRS)

Lo, Ching F.; Ulbrich, N.; Sickles, W. L.; Qian, Cathy X.

1992-01-01

A Wall Signature method, the Hackett method, has been selected to be adapted for the 12-ft Wind Tunnel wall interference assessment/correction (WIAC) system in the present phase. This method uses limited measurements of the static pressure at the wall, in conjunction with the solid wall boundary condition, to determine the strength and distribution of singularities representing the test article. The singularities are used in turn for estimating wall interferences at the model location. The Wall Signature method will be formulated for application to the unique geometry of the 12-ft Tunnel. The development and implementation of a working prototype will be completed, delivered and documented with a software manual. The WIAC code will be validated by conducting numerically simulated experiments rather than actual wind tunnel experiments. The simulations will be used to generate both free-air and confined wind-tunnel flow fields for each of the test articles over a range of test configurations. Specifically, the pressure signature at the test section wall will be computed for the tunnel case to provide the simulated 'measured' data. These data will serve as the input for the WIAC method-Wall Signature method. The performance of the WIAC method then may be evaluated by comparing the corrected parameters with those for the free-air simulation. Each set of wind tunnel/test article numerical simulations provides data to validate the WIAC method. A numerical wind tunnel test simulation is initiated to validate the WIAC methods developed in the project. In the present reported period, the blockage correction has been developed and implemented for a rectangular tunnel as well as the 12-ft Pressure Tunnel. An improved wall interference assessment and correction method for three-dimensional wind tunnel testing is presented in the appendix.

American Sign Language Comprehension Test: A Tool for Sign Language Researchers

ERIC Educational Resources Information Center

Hauser, Peter C.; Paludneviciene, Raylene; Riddle, Wanda; Kurz, Kim B.; Emmorey, Karen; Contreras, Jessica

2016-01-01

The American Sign Language Comprehension Test (ASL-CT) is a 30-item multiple-choice test that measures ASL receptive skills and is administered through a website. This article describes the development and psychometric properties of the test based on a sample of 80 college students including deaf native signers, hearing native signers, deaf…

Tension and Bending Testing of an Integral T-Cap for Stitched Composite Airframe Joints

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.; Leone, Frank A., Jr.

2016-01-01

The Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) is a structural concept that was developed by The Boeing Company to address the complex structural design aspects associated with a pressurized hybrid wing body aircraft configuration. An important design feature required for assembly is the integrally stitched T-cap, which provides connectivity of the corner (orthogonal) joint between adjacent panels. A series of tests were conducted on T-cap test articles, with and without a rod stiffener penetrating the T-cap web, under tension (pull-off) and bending loads. Three designs were tested, including the baseline design used in large-scale test articles. The baseline had only the manufacturing stitch row adjacent to the fillet at the base of the T-cap web. Two new designs added stitching rows to the T-cap web at either 0.5- or 1.0-inch spacing along the height of the web. Testing was conducted at NASA Langley Research Center to determine the behavior of the T-cap region resulting from the applied loading. Results show that stitching arrests the initial delamination failures so that the maximum strength capability exceeds the load at which the initial delaminations develop. However, it was seen that the added web stitching had very little effect on the initial delamination failure load, but actually decreased the initial delamination failure load for tension loading of test articles without a stiffener passing through the web. Additionally, the added web stitching only increased the maximum load capability by between 1% and 12.5%. The presence of the stiffener, however, did increase the initial and maximum loads for both tension and bending loading as compared to the stringerless baseline design. Based on the results of the few samples tested, the additional stitching in the T-cap web showed little advantage over the baseline design in terms of structural failure at the T-cap web/skin junction for the current test articles.

Experimental Studies of Carbon Nanotube Materials for Space Radiators

NASA Technical Reports Server (NTRS)

SanSoucie, MIchael P.; Rogers, Jan R.; Craven, Paul D.; Hyers, Robert W.

2012-01-01

Game ]changing propulsion systems are often enabled by novel designs using advanced materials. Radiator performance dictates power output for nuclear electric propulsion (NEP) systems. Carbon nanotubes (CNT) and carbon fiber materials have the potential to offer significant improvements in thermal conductivity and mass properties. A test apparatus was developed to test advanced radiator designs. This test apparatus uses a resistance heater inside a graphite tube. Metallic tubes can be slipped over the graphite tube to simulate a heat pipe. Several sub ]scale test articles were fabricated using CNT cloth and pitch ]based carbon fibers, which were bonded to a metallic tube using an active braze material. The test articles were heated up to 600 C and an infrared (IR) camera captured the results. The test apparatus and experimental results are presented here.

Advanced on-site power plant development technology program

NASA Technical Reports Server (NTRS)

Kemp, F. S.

1985-01-01

A 30-cell stack was tested for 7200 hours. At 6000 hours the stack was successfully refilled with acid with no loss of performance. A second stack containing the advanced Configuration B cell package was fabricated and assembled for testing in 1985. A 200-kW brassboard inverter was successfully evaluated, verifying the design of the two-bridge ASCR circuit design. A fuel processing catalyst train was tested for 2000 hours verifying the catalyst for use in a 200-kW development reformer. The development reformer was fabricated for evaluation in 1985. The initial test plan was prepared for a 200-kW verification test article.

Ethical & Legal Issues in School Counseling. Chapter 1: Ethical Standards.

ERIC Educational Resources Information Center

Huey, Wayne C.; And Others

This document contains chapter 1 (8 articles) from a collection of 35 articles primarily from American Association for Counseling and Development (AACD) publications on the most important legal and ethical topics about which all school counselors need to be informed. "Ethical Standards for School Counselors: Test Your Knowledge" (Wayne C. Huey)…

GED Items. Volume 5, Numbers 1-6.

ERIC Educational Resources Information Center

GED Items, 1988

1988-01-01

The first of six issues of the GED Items Newsletter publishied in 1988 contains articles on General Educational Development (GED) mathematics instruction, suggestions for teaching writing, and public relations and marketing. Issue 2 has articles on GED science instruction, GED for Marines, holistic scoring, and a review of the new GED tests.…

Reframing "Attainment": Creating and Developing Spaces for Learning within Schools

ERIC Educational Resources Information Center

Hope, Max A.

2017-01-01

This article, based on a keynote presentation given at a conference in Tasmania, examines the notion of "attainment" and argues that a narrow focus on standardised test scores is highly problematic for those concerned with social justice. Using examples from the Freedom to Learn Project, this article presents two case studies of schools…

Higher Education Change and Social Networks: A Review of Research

ERIC Educational Resources Information Center

Kezar, Adrianna

2014-01-01

This article reviews literature on the potential for understanding higher education change processes through social network analysis (SNA). In this article, the main tenets of SNA are reviewed and, in conjunction with organizational theory, are applied to higher education change to develop a set of hypotheses that can be tested in future research.

Leistungsmessung im Sprachunterricht: Positionspapier (Measuring Achievement in Language Instruction: A Position Paper).

ERIC Educational Resources Information Center

Schrand, Heinrich, Ed.

This position paper on the measurement of achievement in language instruction contains nine articles by leading authorities. Three articles, written in German, cover: (1) testing: necessities and dangers, (2) supervision and evaluation of oral achievement in certification examinations, and (3) development of a higher level of an adult education…

Space Launch System, Core Stage, Structural Test Design and Implementation

NASA Technical Reports Server (NTRS)

Shaughnessy, Ray

2017-01-01

As part of the National Aeronautics and Space Administration's (NASA) Space Launch System (SLS) Program, engineers at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama are working to design, develop and implement the SLS Core Stage structural testing. The SLS will have the capability to return humans to the Moon and beyond and its first launch is scheduled for December of 2017. The SLS Core Stage consist of five major elements; Forward Skirt, Liquid Oxygen (LOX) tank, Intertank (IT), Liquid Hydrogen (LH2) tank and the Engine Section (ES). Structural Test Articles (STA) for each of these elements are being designed and produced by Boeing at Michoud Assembly Facility located in New Orleans, La. The structural test for the Core Stage STAs (LH2, LOX, IT and ES) are to be conducted by the MSFC Test Laboratory. Additionally, the MSFC Test Laboratory manages the Structural Test Equipment (STE) design and development to support the STAs. It was decided early (April 2012) in the project life that the LH2 and LOX tank STAs would require new test stands and the Engine Section and Intertank would be tested in existing facilities. This decision impacted schedules immediately because the new facilities would require Construction of Facilities (C of F) funds that require congressional approval and long lead times. The Engine Section and Intertank structural test are to be conducted in existing facilities which will limit lead times required to support the first launch of SLS. With a SLS launch date of December, 2017 Boeing had a need date for testing to be complete by September of 2017 to support flight certification requirements. The test facilities were required to be ready by October of 2016 to support test article delivery. The race was on to get the stands ready before Test Article delivery and meet the test complete date of September 2017. This paper documents the past and current design and development phases and the supporting processes, tools, and methodology for supporting the SLS Core Stage STA test stands and related STE. The paper will address key requirements, system development activities and project challenges. Additionally, the interrelationships as well as interdependencies within the SLS project will be discussed.

University Students' Giftedness Diagnosis and Development

ERIC Educational Resources Information Center

Narikbaeva, Lora M.

2016-01-01

This article deals with the problem of students' giftedness development. Students' test results (n = 851) for "IQ level" and "creativity level" indicators demonstrated the need to improve the quality of work in reference to students' professional giftedness development at the university. Designed complex of pedagogical…

Lamb wave propagation in Z-pin reinforced co-cured composite pi-joints

NASA Astrophysics Data System (ADS)

Swenson, Eric D.; Soni, Som R.; Kapoor, Hitesh

2010-04-01

This paper presents an initial study on Lamb wave propagation characteristics in z-pin reinforced, co-cured composite pi-joints for the purposes of structural health monitoring (SHM). Pi-joint test articles were designed and created to replicate a co-cured, all composite skin-spar joint found within a typical aircraft wing structure. Because pi-joints exhibit various complex damage modes, formal studies are required if SHM systems are to be developed to monitor these types of joints for potential damage. Experiments were conducted on a undamaged (healthy) and damaged test articles where Lamb waves were excited using one lead zirconate titanate (PZT) transducer. A three-dimensional (3D) scanning laser Doppler vibrometer (LDV) was used to collect high-density scans of both the in-plane and out-of-plane velocity measurements. In the damaged test article, where delamination, matrix cracking, and fiber breakage can clearly be seen, changes in both the fundamental antisymmetric A0 and symmetric S0 Lamb wave modes are apparent. In both test articles, the effects of narrow geometry, discontinuity due to the attachment of the web, and thickness has detectable effects on Lamb wave propagation. From the comparisons between Lamb waves propagating through the undamaged and damaged test articles, it is clear that damage can be detected using Lamb waves in z-pin reinforced, co-cured composite pi-joints for this case of extensive damage.

CONTROL OF PCDD/PCDF EMISSIONS FROM MUNICIPAL WASTE COMBUSTION SYSTEMS

EPA Science Inventory

The article gives results of tests on five modern municipal waste combustors (MWCs) to characterize or determine the performance of representative combustor types and associated air emission control systems in the regulatory development process. Test results for uncontrolled (com...

NASA Ares I Launch Vehicle First Stage Roll Control System Cold Flow Development Test Program Overview

NASA Technical Reports Server (NTRS)

Butt, Adam; Popp, Christopher G.; Holt, Kimberly A.; Pitts, Hank M.

2010-01-01

The Ares I launch vehicle is the selected design, chosen to return humans to the moon, Mars, and beyond. It is configured in two inline stages: the First Stage is a Space Shuttle derived five-segment Solid Rocket Booster and the Upper Stage is powered by a Saturn V derived J-2X engine. During launch, roll control for the First Stage (FS) is handled by a dedicated Roll Control System (RoCS) located on the connecting Interstage. That system will provide the Ares I with the ability to counteract induced roll torque while any induced yaw or pitch moments are handled by vectoring of the booster nozzle. This paper provides an overview of NASA s Ares I FS RoCS cold flow development test program including detailed test objectives, types of tests run to meet those objectives, an overview of the results, and applicable lessons learned. The test article was built and tested at the NASA Marshall Space Flight Center in Huntsville, AL. The FS RoCS System Development Test Article (SDTA) is a full scale, flight representative water flow test article whose primary objective was to obtain fluid system performance data to evaluate integrated system level performance characteristics and verify analytical models. Development testing and model correlation was deemed necessary as there is little historical precedent for similar large flow, pulsing systems such as the FS RoCS. The cold flow development test program consisted of flight-similar tanks, pressure regulators, and thruster valves, as well as plumbing simulating flight geometries, combined with other facility grade components and structure. Orifices downstream of the thruster valves were used to simulate the pressure drop through the thrusters. Additional primary objectives of this test program were to: evaluate system surge pressure (waterhammer) characteristics due to thruster valve operation over a range of mission duty cycles at various feed system pressures, evaluate temperature transients and heat transfer in the pressurization system, including regulator blowdown and propellant ullage performance, measure system pressure drops for comparison to analysis of tubing and components, and validate system activation and re-activation procedures for the helium pressurant system. Secondary objectives included: validating system processes for loading, unloading, and purging, validating procedures and system response for multiple failure scenarios, including relief valve operation, and evaluating system performance for contingency scenarios. The test results of the cold flow development test program are essential in validating the performance and interaction of the Roll Control System and anchoring analysis tools and results to a Critical Design Review level of fidelity.

Speechreading Development in Deaf and Hearing Children: Introducing the Test of Child Speechreading

ERIC Educational Resources Information Center

Kyle, Fiona E.; Campbell, Ruth; Mohammed, Tara; Coleman, Mike; MacSweeney, Mairead

2013-01-01

Purpose: In this article, the authors describe the development of a new instrument, the Test of Child Speechreading (ToCS), which was specifically designed for use with deaf and hearing children. Speechreading is a skill that is required for deaf children to access the language of the hearing community. ToCS is a deaf-friendly, computer-based test…

Materials, Manufacturing and Test Development of a Composite Fan Blade Leading Edge Subcomponent for Improved Impact Resistance

NASA Technical Reports Server (NTRS)

Handschuh, Katherine M.; Miller, Sandi G.; Sinnott, Matthew J.; Kohlman, Lee W.; Roberts, Gary D.; Pereira, J. Michael; Ruggeri, Charles R.

2014-01-01

Application of polymer matrix composite materials for jet engine fan blades is becoming attractive as an alternative to metallic blades; particularly for large engines where significant weight savings are recognized on moving to a composite structure. However, the weight benefit of the composite of is offset by a reduction of aerodynamic efficiency resulting from a necessary increase in blade thickness; relative to the titanium blades. Blade dimensions are largely driven by resistance to damage on bird strike. Further development of the composite material is necessary to allow composite blade designs to approximate the dimensions of a metallic fan blade. The reduction in thickness over the state of the art composite blades is expected to translate into structural weight reduction, improved aerodynamic efficiency, and therefore reduced fuel consumption. This paper presents test article design, subcomponent blade leading edge fabrication, test method development, and initial results from ballistic impact of a gelatin projectile on the leading edge of composite fan blades. The simplified test article geometry was developed to realistically simulate a blade leading edge while decreasing fabrication complexity. Impact data is presented on baseline composite blades and toughened blades; where a considerable improvement to impact resistance was recorded.

Materials, Manufacturing, and Test Development of a Composite Fan Blade Leading Edge Subcomponent for Improved Impact Resistance

NASA Technical Reports Server (NTRS)

Miller, Sandi G.; Handschuh, Katherine; Sinnott, Matthew J.; Kohlman, Lee W.; Roberts, Gary D.; Martin, Richard E.; Ruggeri, Charles R.; Pereira, J. Michael

2015-01-01

Application of polymer matrix composite materials for jet engine fan blades is becoming attractive as an alternative to metallic blades; particularly for large engines where significant weight savings are recognized on moving to a composite structure. However, the weight benefit of the composite is offset by a reduction of aerodynamic efficiency resulting from a necessary increase in blade thickness; relative to the titanium blades. Blade dimensions are largely driven by resistance to damage on bird strike. Further development of the composite material is necessary to allow composite blade designs to approximate the dimensions of a metallic fan blade. The reduction in thickness over the state of the art composite blades is expected to translate into structural weight reduction, improved aerodynamic efficiency, and therefore reduced fuel consumption. This paper presents test article design, subcomponent blade leading edge fabrication, test method development, and initial results from ballistic impact of a gelatin projectile on the leading edge of composite fan blades. The simplified test article geometry was developed to realistically simulate a blade leading edge while decreasing fabrication complexity. Impact data is presented on baseline composite blades and toughened blades; where a considerable improvement to impact resistance was recorded.

CRYogenic Orbital TEstbed Ground Test Article Thermal Analysis

NASA Technical Reports Server (NTRS)

Piryk, David; Schallhorn, Paul; Walls, Laurie; Stopnitzky, Benny; Rhys, Noah; Wollen, Mark

2012-01-01

The purpose of this study was to anchor thermal and fluid system models to CRYOTE ground test data. The CRYOTE ground test artide was jointly developed by Innovative Engineering Solutions, United Launch Alliance and NASA KSC. The test article was constructed out of a titanium alloy tank, Sapphire 77 composite skin (similar to G10), an external secondary payload adapter ring, thermal vent system, multi layer insulation and various data acquisition instrumentation. In efforts to understand heat loads throughout this system, the GTA (filled with liquid nitrogen for safety purposes) was subjected to a series of tests in a vacuum chamber at Marshall Space Flight Center. By anchoring analytical models against test data, higher fidelity thermal environment predictions can be made for future flight articles which would eventually demonstrate critical cryogenic fluid management technologies such as system chilldown, transfer, pressure control and long term storage. Significant factors that influenced heat loads included radiative environments, multi-layer insulation performance, tank fill levels and pressures and even contact conductance coefficients. This report demonstrates how analytical thermal/fluid networks were established and includes supporting rationale for specific thermal responses.

Ultrasonic shear wave couplant

DOEpatents

Kupperman, David S.; Lanham, Ronald N.

1985-01-01

Ultrasonically testing of an article at high temperatures is accomplished by the use of a compact layer of a dry ceramic powder as a couplant in a method which involves providing an ultrasonic transducer as a probe capable of transmitting shear waves, coupling the probe to the article through a thin compact layer of a dry ceramic powder, propagating a shear wave from the probe through the ceramic powder and into the article to develop echo signals, and analyzing the echo signals to determine at least one physical characteristic of the article.

Ultrasonic shear wave couplant

DOEpatents

Kupperman, D.S.; Lanham, R.N.

1984-04-11

Ultrasonically testing of an article at high temperatures is accomplished by the use of a compact layer of a dry ceramic powder as a couplant in a method which involves providing an ultrasonic transducer as a probe capable of transmitting shear waves, coupling the probe to the article through a thin compact layer of a dry ceramic powder, propagating a shear wave from the probe through the ceramic powder and into the article to develop echo signals, and analyzing the echo signals to determine at least one physical characteristic of the article.

What is an ROC curve?

PubMed

Hoo, Zhe Hui; Candlish, Jane; Teare, Dawn

2017-06-01

The paper by Body et al is concerned with the evaluation of decision aids, which can be used to identify potential acute coronary syndromes (ACS) in the ED. The authors previously developed the Manchester Acute Coronary Syndromes model (MACS) decision aid, which uses several clinical variables and two biomarkers to 'rule in' and 'rule out' ACS. However, one of the two biomarkers (heart-type fatty acid bindingprotein, H-FABP) is not widely used so a revised decision aid has been developed (Troponin-only Manchester Acute Coronary Syndromes, T-MACS), which include a single biomarker hs-cTnT. In this issue, the authors show how they derive a revised decision aid and describe its performance in a number of independent diagnostic cohort studies. Decision aids (as well as other types of 'diagnostic tests') are often evaluated in terms of diagnostic testing parameters such as the area under the receiver operating characteristic (ROC) curve, sensitivity and specificity. In this article, we explain how the ROC analysis is conducted and why it is an essential step towards developing a test with the desirable levels of sensitivity and specificity. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Encouraging Faculty Attendance at Professional Development Events

ERIC Educational Resources Information Center

Burdick, Dakin; Doherty, Tim; Schoenfeld, Naomi

2015-01-01

For faculty development events to have the greatest impact on campus practice, faculty developers need to attract and include as many faculty members as possible at their events. This article describes the testing of a checklist regarding faculty attendance at professional development events through a survey of 238 faculty members at small…

Saturn Apollo Program

NASA Image and Video Library

1969-02-12

A test engineer drives a Mobility Test Article (MTA) during a test of a Lunar Roving Vehicle (LRV) concept through the mountains of Arizona. The data provided by the MTA helped in designing the LRV, developed under the direction of MSFC. The LRV was designed to allow Apollo astronauts a greater range of mobility during lunar exploration missions.

Globalization and the Growth of International Educational Testing and National Assessment

ERIC Educational Resources Information Center

Kamens, David H.; McNeely, Connie L.

2010-01-01

In this article, the authors develop an argument about the global forces that have led to the explosive growth of national educational assessment and international testing. In particular, the authors argue that the international acceptance of testing comes from key ideological forces in the world polity that are associated with the accelerating…

Superitem Test: An Alternative Assessment Tool to Assess Students' Algebraic Solving Ability

ERIC Educational Resources Information Center

Lian, Lim Hooi; Yew, Wun Thiam; Idris, Noraini

2010-01-01

Superitem test based on the SOLO model (Structure of the Observing Learning Outcome) has become a powerful alternative assessment tool for monitoring the growth of students' cognitive ability in solving mathematics problems. This article focused on developing a superitem test to assess students' algebraic solving ability through interview method.…

GED Items. The Newsletter of the GED Testing Service, 1997.

ERIC Educational Resources Information Center

Hone, Lisa Richards, Ed.

1997-01-01

This document consists of the six issues of the newsletter of the General Educational Development Testing (GED) Service published during 1997. The lead articles of the six issues are, respectively: (1) "Task Force Considers Improvements to Test Center Security Rules," by Cathy Allin discusses the implementation of a monitoring team and…

Problems and Issues in Translating International Educational Achievement Tests

ERIC Educational Resources Information Center

Arffman, Inga

2013-01-01

The article reviews research and findings on problems and issues faced when translating international academic achievement tests. The purpose is to draw attention to the problems, to help to develop the procedures followed when translating the tests, and to provide suggestions for further research. The problems concentrate on the following: the…

Techniques for Embedding Instrumentation in Pressure Vessel Test Articles

NASA Technical Reports Server (NTRS)

Cornelius, Michael

2006-01-01

Many interesting structural and thermal events occur in materials that are housed within a surrounding pressure vessel. In order to measure the environment during these events and explore their causes instrumentation must be installed on or in the material. Transducers can be selected that are small enough to be embedded within the test material but these instruments must interface with an external system in order to apply excitation voltages and output the desired data. The methods for installing the instrumentation and creating an interface are complicated when the material is located in a case or housing containing high pressures and hot gases. Installation techniques for overcoming some of these difficulties were developed while testing a series of small-scale solid propellant and hybrid rocket motors at Marshall Space Flight Center. These techniques have potential applications in other test articles where data are acquired from materials that require containment due to the severe environment encountered during the test process. This severe environment could include high pressure, hot gases, or ionized atmospheres. The development of these techniques, problems encountered, and the lessons learned from the ongoing testing process are summarized.

Cold flow testing of the Space Shuttle Main Engine alternate turbopump development high pressure fuel turbine model

NASA Technical Reports Server (NTRS)

Gaddis, Stephen W.; Hudson, Susan T.; Johnson, P. D.

1992-01-01

NASA's Marshall Space Flight Center has established a cold airflow turbine test program to experimentally determine the performance of liquid rocket engine turbopump drive turbines. Testing of the SSME alternate turbopump development (ATD) fuel turbine was conducted for back-to-back comparisons with the baseline SSME fuel turbine results obtained in the first quarter of 1991. Turbine performance, Reynolds number effects, and turbine diagnostics, such as stage reactions and exit swirl angles, were investigated at the turbine design point and at off-design conditions. The test data showed that the ATD fuel turbine test article was approximately 1.4 percent higher in efficiency and flowed 5.3 percent more than the baseline fuel turbine test article. This paper describes the method and results used to validate the ATD fuel turbine aerodynamic design. The results are being used to determine the ATD high pressure fuel turbopump (HPFTP) turbine performance over its operating range, anchor the SSME ATD steady-state performance model, and validate various prediction and design analyses.

Audio Development Laboratory (ADL) User Test Planning Guide

NASA Technical Reports Server (NTRS)

Romero, Andy

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the ADL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Computer-aided system for interactive psychomotor testing

NASA Astrophysics Data System (ADS)

Selivanova, Karina G.; Ignashchuk, Olena V.; Koval, Leonid G.; Kilivnik, Volodymyr S.; Zlepko, Alexandra S.; Sawicki, Daniel; Kalizhanova, Aliya; Zhanpeisova, Aizhan; Smailova, Saule

2017-08-01

Nowadays research of psychomotor actions has taken a special place in education, sports, medicine, psychology etc. Development of computer system for psychomotor testing could help solve many operational problems in psychoneurology and psychophysiology and also determine the individual characteristics of fine motor skills. This is particularly relevant issue when it comes to children, students, athletes for definition of personal and professional features. The article presents the dynamics of a developing psychomotor skills and application in the training process of means. The results of testing indicated their significant impact on psychomotor skills development.

T-Cap Pull-Off and Bending Behavior for Stitched Structure

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.; Leone, Frank A., Jr.

2016-01-01

The Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) is a structural concept that was developed by The Boeing Company to address the complex structural design aspects associated with a pressurized hybrid wing body aircraft configuration. An important design feature required for assembly is the integrally stitched T-cap, which provides connectivity of the corner (orthogonal) joint between adjacent panels. A series of tests were conducted on T-cap test articles, with and without a rod stiffener penetrating the T-cap web, under tension (pull-off) and bending loads. Three designs were tested, including the baseline design used in largescale test articles. The baseline had only the manufacturing stitch row adjacent to the fillet at the base of the T-cap web. Two new designs added stitching rows to the T-cap web at either 0.5- or 1.0-inch spacing along the height of the web. Testing was conducted at NASA Langley Research Center to determine the behavior of the T-cap region resulting from the applied loading. Results show that stitching arrests the initial delamination failures so that the maximum strength capability exceeds the load at which the initial delaminations develop. However, it was seen that the added web stitching had very little effect on the initial delamination failure load, but actually decreased the initial delamination failure load for tension loading of test articles without a stiffener passing through the web. Additionally, the added web stitching only increased the maximum load capability by between 1% and 12.5%. The presence of the stiffener, however, did increase the initial and maximum loads for both tension and bending loading as compared to the stringerless baseline design. Based on the results of the few samples tested, the additional stitching in the T-cap web showed little advantage over the baseline design in terms of structural failure at the T-cap web/skin junction for the current test articles.

Ocean Thermal Energy Conversion power system development. Phase I. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-12-04

This report covers the conceptual and preliminary design of closed-cycle, ammonia, ocean thermal energy conversion power plants by Westinghouse Electric Corporation. Preliminary designs for evaporator and condenser test articles (0.13 MWe size) and a 10 MWe modular experiment power system are described. Conceptual designs for 50 MWe power systems, and 100 MWe power plants are also descirbed. Design and cost algorithms were developed, and an optimized power system design at the 50 MWe size was completed. This design was modeled very closely in the test articles and in the 10 MWe Modular Application. Major component and auxiliary system design, materials,more » biofouling, control response, availability, safety and cost aspects are developed with the greatest emphasis on the 10 MWe Modular Application Power System. It is concluded that all power plant subsystems are state-of-practice and require design verification only, rather than continued research. A complete test program, which verifies the mechanical reliability as well as thermal performance, is recommended and described.« less

Adapting Tests of Sign Language Assessment for Other Sign Languages--A Review of Linguistic, Cultural, and Psychometric Problems

ERIC Educational Resources Information Center

Haug, Tobias; Mann, Wolfgang

2008-01-01

Given the current lack of appropriate assessment tools for measuring deaf children's sign language skills, many test developers have used existing tests of other sign languages as templates to measure the sign language used by deaf people in their country. This article discusses factors that may influence the adaptation of assessment tests from…

Development and Testing of a Post-Installable Deepwater Monitoring System Using Fiber-Optic Sensors

NASA Technical Reports Server (NTRS)

Seaman, Calvin H.; Brower, David V.; Le, Suy Q.; Tang, Henry H.

2015-01-01

This paper addresses the design and development of a fiber-optic monitoring system that can be deployed on existing deepwater risers and flowlines; and provides a summary of test article fabrication and the subsequent laboratory testing performed at the National Aeronautics and Space Administration-Johnson Space Center (NASA-JSC). A major challenge of a post-installed instrumentation system is to ensure adequate coupling between the instruments and the riser or flowline of interest. This work investigates the sensor coupling for pipelines that are suspended in a water column (from topside platform to seabed) using a fiber-optic sensor clamp and subsea bonding adhesive. The study involved the design, fabrication, and test of several prototype clamps that contained fiber-optic sensors. A mold was produced by NASA using 3-D printing methods that allowed the casting of polyurethane clamp test articles to accommodate 4-inch and 8-inch diameter pipes. The prototype clamps were installed with a subsea adhesive in a "wet" environment and then tested in the NASA Structures Test Laboratory (STL). The tension, compression, and bending test data showed that the prototype sensor clamps achieved good structural coupling, and could provide high quality strain measurement for active monitoring.

Advanced recovery systems wind tunnel test report

NASA Technical Reports Server (NTRS)

Geiger, R. H.; Wailes, W. K.

1990-01-01

Pioneer Aerospace Corporation (PAC) conducted parafoil wind tunnel testing in the NASA-Ames 80 by 120 test sections of the National Full-Scale Aerodynamic Complex, Moffett Field, CA. The investigation was conducted to determine the aerodynamic characteristics of two scale ram air wings in support of air drop testing and full scale development of Advanced Recovery Systems for the Next Generation Space Transportation System. Two models were tested during this investigation. Both the primary test article, a 1/9 geometric scale model with wing area of 1200 square feet and secondary test article, a 1/36 geometric scale model with wing area of 300 square feet, had an aspect ratio of 3. The test results show that both models were statically stable about a model reference point at angles of attack from 2 to 10 degrees. The maximum lift-drag ratio varied between 2.9 and 2.4 for increasing wing loading.

Low Cost Propulsion Technology Testing at the Stennis Space Center: Propulsion Test Article and the Horizontal Test Facility

NASA Technical Reports Server (NTRS)

Fisher, Mark F.; King, Richard F.; Chenevert, Donald J.

1998-01-01

The need for low cost access to space has initiated the development of low cost liquid rocket engine and propulsion system hardware at the Marshall Space Flight Center. This hardware will be tested at the Stennis Space Center's B-2 test stand. This stand has been reactivated for the testing of the Marshall designed Fastrac engine and the Propulsion Test Article. The RP-1 and LOX engine is a turbopump fed gas generator rocket with an ablative nozzle which has a thrust of 60,000 lbf. The Propulsion Test Article (PTA) is a test bed for low cost propulsion system hardware including a composite RP-I tank, flight feedlines and pressurization system, stacked in a booster configuration. The PTA is located near the center line of the B-2 test stand, firing vertically into the water cooled flame deflector. A new second position on the B-2 test stand has been designed and built for the horizontal testing of the Fastrac engine in direct support of the X-34 launch vehicle. The design and integration of these test facilities as well as the coordination which was required between the two Centers is described and lessons learned are provided. The construction of the horizontal test position is discussed in detail. The activation of these facilities is examined and the major test milestones are described.

High-Temperature Modal Survey of a Hot-Structure Control Surface

NASA Technical Reports Server (NTRS)

Spivey, Natalie D.

2011-01-01

Ground vibration tests are routinely conducted for supporting flutter analysis for subsonic and supersonic vehicles; however, for hypersonic vehicles, thermoelastic vibration testing techniques are neither well established nor routinely performed. New high-temperature material systems, fabrication technologies and high-temperature sensors expand the opportunities to develop advanced techniques for performing ground vibration tests at elevated temperatures. When high-temperature materials, which increase in stiffness when heated, are incorporated into a hot-structure that contains metallic components that decrease in stiffness when heated, the interaction between those materials can affect the hypersonic flutter analysis. A high-temperature modal survey will expand the research database for hypersonics and improve the understanding of this dual-material interaction. This report discusses the vibration testing of the carbon-silicon carbide Ruddervator Subcomponent Test Article, which is a truncated version of a full-scale hot-structure control surface. Two series of room-temperature modal test configurations were performed in order to define the modal characteristics of the test article during the elevated-temperature modal survey: one with the test article suspended from a bungee cord (free-free) and the second with it mounted on the strongback (fixed boundary). Testing was performed in the NASA Dryden Flight Research Center Flight Loads Laboratory Large Nitrogen Test Chamber.

Involvement of older people in the development of fall detection systems: a scoping review.

PubMed

Thilo, Friederike J S; Hürlimann, Barbara; Hahn, Sabine; Bilger, Selina; Schols, Jos M G A; Halfens, Ruud J G

2016-02-11

The involvement of users is recommended in the development of health related technologies, in order to address their needs and preferences and to improve the daily usage of these technologies. The objective of this literature review was to identify the nature and extent of research involving older people in the development of fall detection systems. A scoping review according to the framework of Arksey and O'Malley was carried out. A key term search was employed in eight relevant databases. Included articles were summarized using a predetermined charting form and subsequently thematically analysed. A total of 53 articles was included. In 49 of the 53 articles, older people were involved in the design and/or testing stages, and in 4 of 53 articles, they were involved in the conceptual or market deployment stages. In 38 of the 53 articles, the main focus of the involvement of older people was technical aspects. In 15 of the 53 articles, the perspectives of the elderly related to the fall detection system under development were determined using focus groups, single interviews or questionnaires. Until presently, involvement of older people in the development of fall detection systems has focused mainly on technical aspects. Little attention has been given to the specific needs and views of older people in the context of fall detection system development and usage.

A Roy model study of adapting to being HIV positive.

PubMed

Perrett, Stephanie E; Biley, Francis C

2013-10-01

Roy's adaptation model outlines a generic process of adaptation useful to nurses in any situation where a patient is facing change. To advance nursing practice, nursing theories and frameworks must be constantly tested and developed through research. This article describes how the results of a qualitative grounded theory study have been used to test components of the Roy adaptation model. A framework for "negotiating uncertainty" was the result of a grounded theory study exploring adaptation to HIV. This framework has been compared to the Roy adaptation model, strengthening concepts such as focal and contextual stimuli, Roy's definition of adaptation and her description of adaptive modes, while suggesting areas for further development including the role of perception. The comparison described in this article demonstrates the usefulness of qualitative research in developing nursing models, specifically highlighting opportunities to continue refining Roy's work.

The Association of Social Work Boards' Licensure Examinations: A Review of Reliability and Validity Processes

ERIC Educational Resources Information Center

Marson, Stephen M.; DeAngelis, Donna; Mittal, Nisha

2010-01-01

Objectives: The purpose of this article is to create transparency for the psychometric methods employed for the development of the Association of Social Work Boards' (ASWB) exams. Results: The article includes an assessment of the macro (political) and micro (statistical) environments of testing social work competence. The seven-step process used…

Conceptually and Methodologically Vexing Issues in Teacher Knowledge Assessment

ERIC Educational Resources Information Center

Reutzel, D. Ray; Dole, Janice A.; Read, Sylvia; Fawson, Parker; Herman, Kerry; Jones, Cindy D.; Sudweeks, Richard; Fargo, Jamison

2011-01-01

The purpose of this article is to describe the vexing issues that arise as researchers try to define and assess the knowledge teachers need to teach reading and writing effectively in the primary grades. Over the past several years, the authors of this article have developed and tested an assessment system of teacher knowledge under a grant titled…

Structural Analysis and Test Comparison of a 20-Meter Inflation-Deployed Solar Sail

NASA Technical Reports Server (NTRS)

Sleight, David W.; Mann, Troy; Lichodziejewski, David; Derbes, Billy

2006-01-01

Under the direction of the NASA In-Space Propulsion Technology Office, the team of L Garde, NASA Jet Propulsion Laboratory, Ball Aerospace, and NASA Langley Research Center has been developing a scalable solar sail configuration to address NASA s future space propulsion needs. Prior to a flight experiment of a full-scale solar sail, a comprehensive test program was implemented to advance the technology readiness level of the solar sail design. These tests consisted of solar sail component, subsystem, and sub-scale system ground tests that simulated the aspects of the space environment such as vacuum and thermal conditions. In July 2005, a 20-m four-quadrant solar sail system test article was tested in the NASA Glenn Research Center s Space Power Facility to measure its static and dynamic structural responses. Key to the maturation of solar sail technology is the development of validated finite element analysis (FEA) models that can be used for design and analysis of solar sails. A major objective of the program was to utilize the test data to validate the FEA models simulating the solar sail ground tests. The FEA software, ABAQUS, was used to perform the structural analyses to simulate the ground tests performed on the 20-m solar sail test article. This paper presents the details of the FEA modeling, the structural analyses simulating the ground tests, and a comparison of the pretest and post-test analysis predictions with the ground test results for the 20-m solar sail system test article. The structural responses that are compared in the paper include load-deflection curves and natural frequencies for the beam structural assembly and static shape, natural frequencies, and mode shapes for the solar sail membrane. The analysis predictions were in reasonable agreement with the test data. Factors that precluded better correlation of the analyses and the tests were unmeasured initial conditions in the test set-up.

Mathematics pre-service teachers’ statistical reasoning about meaning

NASA Astrophysics Data System (ADS)

Kristanto, Y. D.

2018-01-01

This article offers a descriptive qualitative analysis of 3 second-year pre-service teachers’ statistical reasoning about the mean. Twenty-six pre-service teachers were tested using an open-ended problem where they were expected to analyze a method in finding the mean of a data. Three of their test results are selected to be analyzed. The results suggest that the pre-service teachers did not use context to develop the interpretation of mean. Therefore, this article also offers strategies to promote statistical reasoning about mean that use various contexts.

Language Disorders in Children with Unilateral Hearing Loss: A Systematic Review

PubMed Central

José, Maria Renata; Mondelli, Maria Fernanda Capoani Garcia; Feniman, Mariza Ribeiro; Lopes-Herrera, Simone Aparecida

2013-01-01

Introduction Childhood is a critical period for language development and maturation of the central auditory system. Unilateral hearing loss (UHL) is considered a minimal impairment, and little is discussed regarding its impact on the development of language, communication, and school performance. Objectives A bibliographical survey of scientific articles published from 2001 to 2011 was performed to verify which language disorders can occur in children with UHL and which tests were performed to identify them. Data Synthesis Three databases were used: PubMed, Lilacs, and The Cochrane Library. As inclusion criteria, the articles should have samples of children with UHL, without other impairments, aged between 3 months and 12 years, and reference to language tests applied in this population. Out of 236 papers initially selected, only 5 met the inclusion criteria. In the articles studied, 12 tests were used for language assessment in children with UHL, out of which 9 were directed toward expressive language, and 3 toward receptive language. Children with UHL demonstrated lower scores on receptive and expressive language tests when compared with children with normal hearing. However, they obtained better scores on expressive language tests than children with bilateral hearing loss. Conclusion The findings of this survey showed that only a small number of studies used language tests in children with UHL or addressed language alterations resulting from this type of impairment. Therefore we emphasize the importance of investments in new studies on this subject to provide better explanations related to language difficulties presented by children with UHL. PMID:25992090

Language disorders in children with unilateral hearing loss: a systematic review.

PubMed

José, Maria Renata; Mondelli, Maria Fernanda Capoani Garcia; Feniman, Mariza Ribeiro; Lopes-Herrera, Simone Aparecida

2014-04-01

Introduction Childhood is a critical period for language development and maturation of the central auditory system. Unilateral hearing loss (UHL) is considered a minimal impairment, and little is discussed regarding its impact on the development of language, communication, and school performance. Objectives A bibliographical survey of scientific articles published from 2001 to 2011 was performed to verify which language disorders can occur in children with UHL and which tests were performed to identify them. Data Synthesis Three databases were used: PubMed, Lilacs, and The Cochrane Library. As inclusion criteria, the articles should have samples of children with UHL, without other impairments, aged between 3 months and 12 years, and reference to language tests applied in this population. Out of 236 papers initially selected, only 5 met the inclusion criteria. In the articles studied, 12 tests were used for language assessment in children with UHL, out of which 9 were directed toward expressive language, and 3 toward receptive language. Children with UHL demonstrated lower scores on receptive and expressive language tests when compared with children with normal hearing. However, they obtained better scores on expressive language tests than children with bilateral hearing loss. Conclusion The findings of this survey showed that only a small number of studies used language tests in children with UHL or addressed language alterations resulting from this type of impairment. Therefore we emphasize the importance of investments in new studies on this subject to provide better explanations related to language difficulties presented by children with UHL.

Temperamental workers: Psychology, business, and the Humm-Wadsworth Temperament Scale in interwar America.

PubMed

Lussier, Kira

2018-05-01

This article traces the history of a popular interwar psychological test, the Humm-Wadsworth Temperament Scale (HWTS), from its development in the early 1930s to its adoption by corporate personnel departments. In popular articles, trade magazines, and academic journals, industrial psychologist Doncaster Humm and personnel manager Guy Wadsworth trumpeted their scale as a scientific measure of temperament that could ensure efficient hiring practices and harmonious labor relations by screening out "problem employees" and screening for temperamentally "normal" workers. This article demonstrates how concerns about the epistemological and scientific credibility of the HWTS were intimately entangled with concerns about its value to business at every step in the test's development. The HWTS sought to measure the emotional and social dimensions of an individual's personality so as to assess their suitability for work. The practice of temperament testing conjured a vision of the subject whose emotional and social disposition was foundational to their own capacity to find employment, and whose capacity to appropriately express, but regulate, their emotions was foundational to corporate order. The history of the HWTS offers an instructive case of how psychological tests embed social hierarchies, political claims, and economic ideals within their very theoretical and methodological foundations. Although the HWTS itself may have faded from use, the test directly inspired creators of subsequent popular personality tests, such as the Minnesota Multiphasic Personality Inventory and the Myers-Briggs Type Indicator. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Development and Comparison of Technical Solutions for Electricity Monitoring Equipment

NASA Astrophysics Data System (ADS)

Potapovs, A.; Obushevs, A.

2017-12-01

The paper focuses on the elaboration of a demand-side management platform for optimal energy management strategies; the topicality is related to the description and comparison of the developed electricity monitoring and control equipment. The article describes two versions based on Atmega328 and STM32 microcontrollers, a lower and higher level of precision, and other distinct performance parameters. At the end of the article, the results of the testing of the two types of equipment are given and their comparison is made.

How Not to Evaluate a Psychological Measure: Rebuttal to Criticism of the Defining Issues Test of Moral Judgment Development by Curzer and Colleagues

ERIC Educational Resources Information Center

Thoma, Stephen J.; Bebeau, Muriel J.; Narvaez, Darcia

2016-01-01

In a 2014 paper in "Theory and Research in Education," Howard Curzer and colleagues critique the Defining Issues Test of moral judgment development according to eight criteria that are described as difficulties any measure of educational outcomes must address. This article highlights how Curzer et al. do not consult existing empirical…

Using the Minnesota Multiphasic Personality Inventory-2 to Develop a Scale to Identify Test Anxiety among Students with Learning Disabilities

ERIC Educational Resources Information Center

Lufi, Dubi; Awwad, Abeer

2013-01-01

The purpose of this article was to describe an initial step developing a new scale to identify individuals with learning disabilities (LD) and test anxiety. Eighty-eight students answered the "Minnesota Multiphasic Personality Inventory-2" (MMPI-2). The participants were drawn from the following three groups: (a) adults with LD and test…

Micron Accuracy Deployment Experiment (MADE), phase A. Volume 1

NASA Technical Reports Server (NTRS)

Peterson, Lee D.; Lake, Mark S.

1995-01-01

This report documents a Phase A In-STEP flight experiment development effort. The objective of the experiment is to deploy a portion of a segmented reflector on the Shuttle and study its micron-level mechanics. Ground test data are presented which projects that the on-orbit precision of the test article should be approximately 5 microns. Extensive hardware configuration development information is also provided.

The Impact of Advanced Geometry and Measurement Curriculum Units on the Mathematics Achievement of First-Grade Students

ERIC Educational Resources Information Center

Gavin, M. Katherine; Casa, Tutita M.; Firmender, Janine M.; Carroll, Susan R.

2013-01-01

The goal of Project M2 was to develop and field-test challenging geometry and measurement units for K-2 students. The units were developed using recommendations from gifted, mathematics, and early childhood education. This article reports on achievement results for students in Grade 1 at 12 diverse sites in four states using the Iowa Tests of…

Long Duration Testing of a Spacesuit Water Membrane Evaporator Prototype

NASA Technical Reports Server (NTRS)

Bue, Grant C.; Makinen, Janice; Cox, Marlon; Watts, Carly; Campbell, Colin; Vogel, Matthew; Colunga, Aaron

2011-01-01

The Spacesuit Water Membrane Evaporator (SWME) is a heat-rejection device that is being developed to perform thermal control for advanced spacesuits. Cooling is achieved by circulating water from the liquid cooling garment (LCG) through hollow fibers (HoFi?s), which are small hydrophobic tubes. Liquid water remains within the hydrophobic tubes, but water vapor is exhausted to space, thereby removing heat. A SWME test article was tested over the course of a year, for a total of 1200 cumulative hours. In order to evaluate SWME tolerance to contamination due to constituents caused by distillation processes, these constituents were allowed to accumulate in the water as evaporation occurred. A test article was tested over the course of a year for a total of 1200 cumulative hours. The heat rejection performance of the SWME degraded significantly--below 700 W, attributable to the accumulation of rust in the circulating loop and biofilm growth. Bubble elimination capability, a feature that was previously proven with SWME, was compromised during the test, most likely due to loss of hydrophobic properties of the hollow fibers. The utilization of water for heat rejection was shown not to be dependent on test article, life cycle, heat rejection rate, or freezing of the membranes.

Long Duration Testing of a Spacesuit Water Membrane Evaporator Prototype

NASA Technical Reports Server (NTRS)

Bue, Grant C.; Makinen, Janice; Cox, Marlon; Watts, Carly; Campbell, Colin; Vogel, Matthew; Colunga, Aaron; Conger, Bruce

2012-01-01

The Spacesuit Water Membrane Evaporator (SWME) is a heat-rejection device that is being developed to perform thermal control for advanced spacesuits. Cooling is achieved by circulating water from the liquid cooling garment (LCG) through hollow fibers (HoFi s), which are small hydrophobic tubes. Liquid water remains within the hydrophobic tubes, but water vapor is exhausted to space, thereby removing heat. A SWME test article was tested over the course of a year, for a total of 600 cumulative hours. In order to evaluate SWME tolerance to contamination due to constituents caused by distillation processes, these constituents were allowed to accumulate in the water as evaporation occurred. A test article was tested over the course of a year for a total of 600 cumulative hours. The heat rejection performance of the SWME degraded significantly--below 700 W, attributable to the accumulation of rust in the circulating loop and biofilm growth. Bubble elimination capability, a feature that was previously proven with SWME, was compromised during the test, most likely due to loss of hydrophobic properties of the hollow fibers. The utilization of water for heat rejection was shown not to be dependent on test article, life cycle, heat rejection rate, or freezing of the membranes.

Evaluating Constraints on Heavy-Ion SEE Susceptibility Imposed by Proton SEE Testing and Other Mixed Environments

NASA Technical Reports Server (NTRS)

Ladbury, R. L.; Lauenstein, J.-M.

2016-01-01

We develop metrics for assessing the effectiveness of proton SEE data for bounding heavy-ion SEE susceptibility. The metrics range from simple geometric criteria requiring no knowledge of the test articles to bounds of SEE rates.

Vacuum Deployment and Testing of a 4-Quadrant Scalable Inflatable Solar Sail System

NASA Technical Reports Server (NTRS)

Lichodziejewski, David; Derbes, Billy; Galena, Daisy; Friese, Dave

2005-01-01

Solar sails reflect photons streaming from the sun and transfer momentum to the sail. The thrust, though small, is continuous and acts for the life of the mission without the need for propellant. Recent advances in materials and ultra-low mass gossamer structures have enabled a host of useful missions utilizing solar sail propulsion. The team of L'Garde, Jet Propulsion Laboratories, Ball Aerospace, and Langley Research Center, under the direction of the NASA In-Space Propulsion office, has been developing a scalable solar sail configuration to address NASA s future space propulsion needs. The baseline design currently in development and testing was optimized around the 1 AU solar sentinel mission. Featuring inflatably deployed sub-T(sub g), rigidized beam components, the 10,000 sq m sail and support structure weighs only 47.5 kg, including margin, yielding an areal density of 4.8 g/sq m. Striped sail architecture, net/membrane sail design, and L'Garde's conical boom deployment technique allows scalability without high mass penalties. This same structural concept can be scaled to meet and exceed the requirements of a number of other useful NASA missions. This paper discusses the interim accomplishments of phase 3 of a 3-phase NASA program to advance the technology readiness level (TRL) of the solar sail system from 3 toward a technology readiness level of 6 in 2005. Under earlier phases of the program many test articles have been fabricated and tested successfully. Most notably an unprecedented 4-quadrant 10 m solar sail ground test article was fabricated, subjected to launch environment tests, and was successfully deployed under simulated space conditions at NASA Plum Brook s 30m vacuum facility. Phase 2 of the program has seen much development and testing of this design validating assumptions, mass estimates, and predicted mission scalability. Under Phase 3 a much larger 20 m square test article including subscale vane has been fabricated and tested. A 20 m system ambient deployment has been successfully conducted after enduring Delta-2 launch environment testing. The program will culminate in a vacuum deployment of a 20 m subscale test article at the NASA Glenn s Plum Brook 30 m vacuum test facility to bring the TRL level as close to 6 as possible in 1 g. This focused program will pave the way for a flight experiment of this highly efficient space propulsion technology.

Test of Understanding of Vectors: A Reliable Multiple-Choice Vector Concept Test

ERIC Educational Resources Information Center

Barniol, Pablo; Zavala, Genaro

2014-01-01

In this article we discuss the findings of our research on students' understanding of vector concepts in problems without physical context. First, we develop a complete taxonomy of the most frequent errors made by university students when learning vector concepts. This study is based on the results of several test administrations of open-ended…

A Study on the English Language Teachers' Preparation of Tests

ERIC Educational Resources Information Center

Saricoban, Arif

2011-01-01

In this article the researcher has examined the current situation in test (a) construction: designing, structuring, developing, (b) administering, and (c) assessing the foreign language tests to see if we are still at the same point (traditional) and has given some suggestions on this indispensable issue. To collect the necessary data the 4th year…

A Graphical Approach to Evaluating Equating Using Test Characteristic Curves

ERIC Educational Resources Information Center

Wyse, Adam E.; Reckase, Mark D.

2011-01-01

An essential concern in the application of any equating procedure is determining whether tests can be considered equated after the tests have been placed onto a common scale. This article clarifies one equating criterion, the first-order equity property of equating, and develops a new method for evaluating equating that is linked to this…

Museum Exhibition on Testing and Measurement: Scientific Principles, Social Impact of Testing, and Dialogue with the Public

ERIC Educational Resources Information Center

Allalouf, Avi; Alderoqui-Pinus, Diana

2012-01-01

This article deals with a pioneering project currently being developed, namely, the Exhibition on Testing and Measurement. This interactive traveling exhibition will be presented in science museums in Israel, the United States, and other countries. It has been conceived as an innovative means of familiarizing the public with educational…

Development of 3D Ice Accretion Measurement Method

NASA Technical Reports Server (NTRS)

Lee, Sam; Broeren, Andy P.; Addy, Harold E., Jr.; Sills, Robert; Pifer, Ellen M.

2012-01-01

Icing wind tunnels are designed to simulate in-flight icing environments. The chief product of such facilities is the ice accretion that forms on various test articles. Documentation of the resulting ice accretion key piece of data in icing-wind-tunnel tests. Number of currently used options for documenting ice accretion in icing-wind-tunnel testing.

Development of an inflatable radiator system. [for space shuttles

NASA Technical Reports Server (NTRS)

Leach, J. W.

1976-01-01

Conceptual designs of an inflatable radiator system developed for supplying short duration supplementary cooling of space vehicles are described along with parametric trade studies, materials evaluation/selection studies, thermal and structural analyses, and numerous element tests. Fabrication techniques developed in constructing the engineering models and performance data from the model thermal vacuum tests are included. Application of these data to refining the designs of the flight articles and to constructing a full scale prototype radiator is discussed.

Assessment of a condition-specific quality-of-life measure for patients with developmentally absent teeth: validity and reliability testing.

PubMed

Akram, A J; Ireland, A J; Postlethwaite, K C; Sandy, J R; Jerreat, A S

2013-11-01

This article describes the process of validity and reliability testing of a condition-specific quality-of-life measure for patients with hypodontia presenting for orthodontic treatment. The development of the instrument is described in a previous article. Royal Devon and Exeter NHS Foundation Trust & Musgrove Park Hospital, Taunton. The child perception questionnaire was used as a standard against which to test criterion validity. The Bland and Altman method was used to check agreement between the two questionnaires. Construct validity was tested using principal component analysis on the four sections of the questionnaire. Test-retest reliability was tested using intraclass correlation coefficient and Bland and Altman method. Cronbach's alpha was used to test internal consistency reliability. Overall the questionnaire showed good reliability, criterion and construct validity. This together with previous evidence of good face and content validity suggests that the instrument may prove useful in clinical practice and further research. This study has demonstrated that the newly developed condition-specific quality-of-life questionnaire is both valid and reliable for use in young patients with hypodontia. © 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

Feminist Identity Development: The Current State of Theory, Research, and Practice

ERIC Educational Resources Information Center

Hyde, Janet Shibley

2002-01-01

A review of the three articles on feminist identity development in this issue indicates that (a) the Feminist Identity Development Scale (FIDS) and the Feminist Identity Composite (FIC) perform similarly and acceptably in psychometric analyses, (b) no research has properly tested whether there are true stages of feminist identity development, and…

Summary of Stirling Convertor Testing at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Schreiber, Jeffrey G.

2006-01-01

The NASA Glenn Research Center (GRC) has been testing free-piston Stirling convertors for potential use in radioisotope power systems. These convertors tend to be in the 35 to 80 W electric power output range. Tests at GRC have accumulated over 80,000 hr of operation. Test articles have been received from Infinia Corporation of Kennewick, Washington and from Sunpower of Athens, Ohio. Infinia designed and built the developmental Stirling Technology Demonstration Convertors (TDC) in addition to the more advanced Test Bed and Engineering Unit convertors. GRC has eight of the TDC's under test including two that operate in a thermal vacuum environment. Sunpower designed and developed the EE-35 and the Advanced Stirling Convertor (ASC). GRC has six of the EE- 35 s and is preparing for testing multiple ASC s. Free-piston Stirling convertors for radioisotope power systems make use of non-contacting operation that eliminates wear and is suited for long-term operation. Space missions with radioisotope power systems are often considered that extend from three to 14 years. One of the key capabilities of the GRC test facility is the ability to support continuous, unattended operation. Hardware, software, and procedures for preparing the test articles were developed to support these tests. These included the processing of the convertors for minimizing the contaminants in the working fluid, developing a helium charging system for filling and for gas sample analysis, and the development of new control software and a high-speed protection circuit to insure safe, round-the-clock operation. Performance data of Stirling convertors over time is required to demonstrate that a radioisotope power system is capable of providing reliable power for multi-year missions. This paper will discuss the status of Stirling convertor testing at GRC.

Summary of Stirling Convertor Testing at GRC

NASA Technical Reports Server (NTRS)

Schreiber, Jeffrey G.

2006-01-01

The NASA Glenn Research Center (GRC) has been testing free-piston Stirling convertors for potential use in radioisotope power systems. These convertors tend to be in the 35 to 80 watt electric power output range. Tests at GRC have accumulated over 80,000 hours of operation. Test articles have been received from Infinia Corporation of Kennewick, WA and from Sunpower of Athens, OH. Infinia designed and built the developmental Stirling Technology Demonstration Convertors (TDC) in addition to the more advanced Test Bed and Engineering Unit convertors. GRC has eight of the TDC's under test including two that operate in a thermal vacuum environment. Sunpower designed and developed the EE- 35 and the Advanced Stirling Convertor (ASC). GRC has six of the EE-35's and is preparing for testing multiple ASC's. Free-piston Stirling convertors for radioisotope power systems make use of non-contacting operation that eliminates wear and is suited for longterm operation. Space missions with radioisotope power systems are often considered that extend from three to 14 years. One of the key capabilities of the GRC test facility is the ability to support continuous, unattended operation. Hardware, software, and procedures for preparing the test articles were developed to support these tests. These included the processing of the convertors for minimizing the contaminants in the working fluid, developing a helium charging system for filling and for gas sample analysis, and the development of new control software and a high-speed protection circuit to insure safe, round-the-clock operation. Performance data of Stirling convertors over time is required to demonstrate that a radioisotope power system is capable of providing reliable power for multi-year missions. This paper will discuss the status of Stirling convertor testing at GRC.

Software production methodology tested project

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1976-01-01

The history and results of a 3 1/2-year study in software development methodology are reported. The findings of this study have become the basis for DSN software development guidelines and standard practices. The article discusses accomplishments, discoveries, problems, recommendations and future directions.

A collection of articles on S/X-band experiment zero delay ranging tests, volume 1

NASA Technical Reports Server (NTRS)

Otoshi, T. Y. (Editor)

1975-01-01

Articles are presented which are concerned with the development of special test equipment and a dual-frequency zero delay device (ZDD) that were required for range tests and the measurement of ground station delays for the Mariner-Venus-Mercury 1973 S/X-band experiment. Test data obtained at DSS 14 after installation of the ZDD on the 64-m antenna are given. It is shown that large variations of range were observed as a function of antenna elevation angle and were sensitive to antenna location. A ranging calibration configuration that was subsequently developed and a technique for determining the appropriate Z-correction are described. Zero delay test data at DSS 14 during the Mariner 10 Venus-Mercury-Encounter periods (1974 days 12-150) are presented. The theoretical analysis and experimental verifications are included of the effects of multipath and effects of discontinuities on range delay measurements. A movable subreflector technique and the multipath theory were used to isolate principal multipath errors on the 64-m antenna and to enable a more accurate determination of the actual ground station range delay.

Should We Stop Developing Heuristics and Only Rely on Mixed Integer Programming Solvers in Automated Test Assembly? A Rejoinder to van der Linden and Li (2016).

PubMed

Chen, Pei-Hua

2017-05-01

This rejoinder responds to the commentary by van der Linden and Li entiled "Comment on Three-Element Item Selection Procedures for Multiple Forms Assembly: An Item Matching Approach" on the article "Three-Element Item Selection Procedures for Multiple Forms Assembly: An Item Matching Approach" by Chen. Van der Linden and Li made a strong statement calling for the cessation of test assembly heuristics development, and instead encouraged embracing mixed integer programming (MIP). This article points out the nondeterministic polynomial (NP)-hard nature of MIP problems and how solutions found using heuristics could be useful in an MIP context. Although van der Linden and Li provided several practical examples of test assembly supporting their view, the examples ignore the cases in which a slight change of constraints or item pool data might mean it would not be possible to obtain solutions as quickly as before. The article illustrates the use of heuristic solutions to improve both the performance of MIP solvers and the quality of solutions. Additional responses to the commentary by van der Linden and Li are included.

User Testing of Consumer Medicine Information in Australia

ERIC Educational Resources Information Center

Jay, Eleanor; Aslani, Parisa; Raynor, D. K.

2011-01-01

Background: Consumer Medicine Information (CMI) forms an important basis for the dissemination of medicines information worldwide. Methods: This article presents an overview of the design and development of Australian CMI, and discusses "user-testing" as an iterative, formative process for CMI design. Findings: In Australia, legislation…

Using Teacher-Made Measurement Devices.

ERIC Educational Resources Information Center

Mehrens, William A.; Lehmann, Irvin J.

1987-01-01

Classroom measurement devices, when tailored to fit a teacher's particular instructional objectives, are essential for optimal teaching and learning. Teachers use test data to assess students' progress but often fail to analyze tests for validity. This article shows how locally and correctly developed assessment tools may serve a variety of…

A Residual Mass Ballistic Testing Method to Compare Armor Materials or Components (Residual Mass Ballistic Testing Method)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benjamin Langhorst; Thomas M Lillo; Henry S Chu

2014-05-01

A statistics based ballistic test method is presented for use when comparing multiple groups of test articles of unknown relative ballistic perforation resistance. The method is intended to be more efficient than many traditional methods for research and development testing. To establish the validity of the method, it is employed in this study to compare test groups of known relative ballistic performance. Multiple groups of test articles were perforated using consistent projectiles and impact conditions. Test groups were made of rolled homogeneous armor (RHA) plates and differed in thickness. After perforation, each residual projectile was captured behind the target andmore » its mass was measured. The residual masses measured for each test group were analyzed to provide ballistic performance rankings with associated confidence levels. When compared to traditional V50 methods, the residual mass (RM) method was found to require fewer test events and be more tolerant of variations in impact conditions.« less

[Clinical exercise testing and the Fick equation: strategic thinking for optimizing diagnosis].

PubMed

Perrault, H; Richard, R

2012-04-01

This article examines the expected exercise-induced changes in the components of the oxygen transport system as described by the Fick equation with a view to enable a critical analysis of a standard incremental exercise test to identify normal and abnormal patterns of responses and generate hypotheses as to potential physiological and/or pathophysiological causes. The text reviews basic physiological principals and provides useful reminders of standard equations that serve to integrate circulatory, respiratory and skeletal muscle functions. More specifically, the article provides a conceptual and quantitative framework linking the exercise-induced increase in whole body oxygen uptake to central circulatory and peripheral circulatory factors with the view to establish the normalcy of response. Thus, the article reviews the exercise response to cardiac output determinants and provides qualitative and quantitative perspective bases for making assumptions on the peripheral circulatory factors and oxygen use. Finally, the article demonstrates the usefulness of exercise testing as an effective integrative physiological approach to develop clinical reasoning or verify pathophysiological outcomes. Copyright © 2012 SPLF. Published by Elsevier Masson SAS. All rights reserved.

Nuclear Thermal Rocket Element Environmental Simulator (NTREES)

NASA Astrophysics Data System (ADS)

Emrich, William J.

2008-01-01

To support a potential future development of a nuclear thermal rocket engine, a state-of-the-art non nuclear experimental test setup has been constructed to evaluate the performance characteristics of candidate fuel element materials and geometries in representative environments. The test device simulates the environmental conditions (minus the radiation) to which nuclear rocket fuel components could be subjected during reactor operation. Test articles mounted in the simulator are inductively heated in such a manner as to accurately reproduce the temperatures and heat fluxes normally expected to occur as a result of nuclear fission while at the same time being exposed to flowing hydrogen. This project is referred to as the Nuclear Thermal Rocket Element Environment Simulator or NTREES. The NTREES device is located at the Marshall Space flight Center in a laboratory which has been modified to accommodate the high powers required to heat the test articles to the required temperatures and to handle the gaseous hydrogen flow required for the tests. Other modifications to the laboratory include the installation of a nitrogen gas supply system and a cooling water supply system. During the design and construction of the facility, every effort was made to comply with all pertinent regulations to provide assurance that the facility could be operated in a safe and efficient manner. The NTREES system can currently supply up to 50 kW of inductive heating to the fuel test articles, although the facility has been sized to eventually allow test article heating levels of up to several megawatts.

Nuclear Thermal Rocket Element Environmental Simulator (NTREES)

NASA Technical Reports Server (NTRS)

Emrich, William J., Jr.

2008-01-01

To support the eventual development of a nuclear thermal rocket engine, a state-of-the-art experimental test setup has been constructed to evaluate the performance characteristics of candidate fuel element materials and geometries in representative environments. The test device simulates the environmental conditions (minus the radiation) to which nuclear rocket fuel components will be subjected during reactor operation. Test articles mounted in the simulator are inductively heated in such a manner as to accurately reproduce the temperatures and heat fluxes normally expected to occur as a result of nuclear fission while at the same time being exposed to flowing hydrogen. This project is referred to as the Nuclear Thermal Rocket Element Environment Simulator or NTREES. The NTREES device is located at the Marshall Space flight Center in a laboratory which has been modified to accommodate the high powers required to heat the test articles to the required temperatures and to handle the gaseous hydrogen flow required for the tests. Other modifications to the laboratory include the installation of a nitrogen gas supply system and a cooling water supply system. During the design and construction of the facility, every effort was made to comply with all pertinent regulations to provide assurance that the facility could be operated in a safe and efficient manner. The NTREES system can currently supply up to 50 kW of inductive heating to the fuel test articles, although the facility has been sized to eventually allow test article heating levels of up to several megawatts.

Theory, Observation, and Validation: Commentary on Almond, Kim, Velasquez, & Shute

ERIC Educational Resources Information Center

Markus, Keith A.

2014-01-01

Keith Marcus congratulates Almond et al. on an interesting article bringing together two topics that are important to the field of testing. He states that some aspects of the exposition came across as not yet fully developed, as if the manuscript had been hurried to press. In this commentary, he attempts to expand aspects of the article, which he…

27 CFR 19.263 - Claims on spirits, denatured spirits, articles, or wines lost or destroyed in bond-specific...

Code of Federal Regulations, 2011 CFR

2011-04-01

... spirits, articles, or wines in bond must include the following information: (1) Identity of containers... of claim. The total amount of tax for which the claim is filed; (4) Identity of distilled spirits... research, development, or testing; (8) Theft. If lost by theft, the facts establishing that the loss did...

A Boilerplate Capsule Test Technique for the Orion Parachute Test Program

NASA Technical Reports Server (NTRS)

Moore, James W.; Fraire, Usbaldo, Jr.

2013-01-01

The test program developing parachutes for the Orion/MPCV includes drop tests of a Parachute Test Vehicle designed to emulate the wake of the Orion capsule. Delivery of this test vehicle to the initial velocity, altitude, and orientation required for the test is a difficult problem involving multiple engineering disciplines. The available delivery of aircraft options imposed constraints on the test vehicle development and concept of operations. This paper describes the development of this test technique. The engineering challenges include the extraction from an aircraft and separation of two aerodynamically unstable vehicles, one of which will be delivered to a specific orientation with reasonably small rates. The desired attitude is achieved by precisely targeting the separation point using on-board monitoring of the motion. The design of the test vehicle is described. The trajectory simulations and other analyses used to develop this technique and predict the behavior of the test article are reviewed in detail. The application of the technique on several successful drop tests is summarized.

Generation of Test Questions from RDF Files Using PYTHON and SPARQL

NASA Astrophysics Data System (ADS)

Omarbekova, Assel; Sharipbay, Altynbek; Barlybaev, Alibek

2017-02-01

This article describes the development of the system for the automatic generation of test questions based on the knowledge base. This work has an applicable nature and provides detailed examples of the development of ontology and implementation the SPARQL queries in RDF-documents. Also it describes implementation of the program generating questions in the Python programming language including the necessary libraries while working with RDF-files.

Orion Ground Test Article Water Impact Tests: Photogrammetric Evaluation of Impact Conditions

NASA Technical Reports Server (NTRS)

Vassilakos, Gregory J.; Mark, Stephen D.

2018-01-01

The Ground Test Article (GTA) is an early production version of the Orion Crew Module (CM). The structural design of the Orion CM is being developed based on LS-DYNA water landing simulations. As part of the process of confirming the accuracy of LS-DYNA water landing simulations, the GTA water impact test series was conducted at NASA Langley Research Center (LaRC) to gather data for comparison with simulations. The simulation of the GTA water impact tests requires the accurate determination of the impact conditions. To accomplish this, the GTA was outfitted with an array of photogrammetry targets. The photogrammetry system utilizes images from two cameras with a specialized tracking software to determine time histories for the 3-D coordinates of each target. The impact conditions can then be determined from the target location data.

Comparison of Modal Analysis Methods Applied to a Vibro-Acoustic Test Article

NASA Technical Reports Server (NTRS)

Pritchard, Jocelyn; Pappa, Richard; Buehrle, Ralph; Grosveld, Ferdinand

2001-01-01

Modal testing of a vibro-acoustic test article referred to as the Aluminum Testbed Cylinder (ATC) has provided frequency response data for the development of validated numerical models of complex structures for interior noise prediction and control. The ATC is an all aluminum, ring and stringer stiffened cylinder, 12 feet in length and 4 feet in diameter. The cylinder was designed to represent typical aircraft construction. Modal tests were conducted for several different configurations of the cylinder assembly under ambient and pressurized conditions. The purpose of this paper is to present results from dynamic testing of different ATC configurations using two modal analysis software methods: Eigensystem Realization Algorithm (ERA) and MTS IDEAS Polyreference method. The paper compares results from the two analysis methods as well as the results from various test configurations. The effects of pressurization on the modal characteristics are discussed.

Semantic super networks: A case analysis of Wikipedia papers

NASA Astrophysics Data System (ADS)

Kostyuchenko, Evgeny; Lebedeva, Taisiya; Goritov, Alexander

2017-11-01

An algorithm for constructing super-large semantic networks has been developed in current work. Algorithm was tested using the "Cosmos" category of the Internet encyclopedia "Wikipedia" as an example. During the implementation, a parser for the syntax analysis of Wikipedia pages was developed. A graph based on list of articles and categories was formed. On the basis of the obtained graph analysis, algorithms for finding domains of high connectivity in a graph were proposed and tested. Algorithms for constructing a domain based on the number of links and the number of articles in the current subject area is considered. The shortcomings of these algorithms are shown and explained, an algorithm is developed on their joint use. The possibility of applying a combined algorithm for obtaining the final domain is shown. The problem of instability of the received domain was discovered when starting an algorithm from two neighboring vertices related to the domain.

Design and Fabrication of a Tank-Applied Broad Area Cooling Shield Coupon

NASA Technical Reports Server (NTRS)

Wood, J. J.; Middlemas, M. R.

2012-01-01

The small-scale broad area cooling (BAC) shield test panel represents a section of the cryogenic propellant storage and transfer ground test article, a flight-like cryogenic propellant storage tank. The test panel design includes an aluminum tank shell, primer, spray-on foam insulation, multilayer insulation (MLI), and BAC shield hardware. This assembly was sized to accurately represent the character of the MLI/BAC shield system, be quickly and inexpensively assembled, and be tested in the Marshall Space Flight Center Acoustic Test Facility. Investigating the BAC shield response to a worst-case launch dynamic load was the key purpose for developing the test article and performing the test. A preliminary method for structurally supporting the BAC shield using low-conductivity standoffs was designed, manufactured, and evaluated as part of the test. The BAC tube-standoff interface and unsupported BAC tube lengths were key parameters for evaluation. No noticeable damage to any system hardware element was observed after acoustic testing.

Assessment and Quality Social Studies

ERIC Educational Resources Information Center

Savage, Tom V.

2003-01-01

Those anonymous individuals who develop high-stakes tests by which educational quality is measured exercise great influence in defining educational quality. In this article, the author examines the impact of high-stakes testing on the welfare of the children and the quality of social studies instruction. He presents the benefits and drawbacks of…

Recipe for an Infographic

ERIC Educational Resources Information Center

Abilock, Debbie; Williams, Connie

2014-01-01

In this article Debbie Abilock and Connie Williams apply the processes used by a food testing organization that strives to develop absolutely the best recipes for popular dishes, testing each recipe until they arrive at the combination of ingredients, technique, temperature, cooking time, and equipment that yields the best, most fool-proof recipe…

Dual-Process Theories of Reasoning: The Test of Development

ERIC Educational Resources Information Center

Barrouillet, Pierre

2011-01-01

Dual-process theories have become increasingly influential in the psychology of reasoning. Though the distinction they introduced between intuitive and reflective thinking should have strong developmental implications, the developmental approach has rarely been used to refine or test these theories. In this article, I review several contemporary…

Statistical Diversions

ERIC Educational Resources Information Center

Petocz, Peter; Sowey, Eric

2008-01-01

In this article, the authors focus on hypothesis testing--that peculiarly statistical way of deciding things. Statistical methods for testing hypotheses were developed in the 1920s and 1930s by some of the most famous statisticians, in particular Ronald Fisher, Jerzy Neyman and Egon Pearson, who laid the foundations of almost all modern methods of…

Testing for change in structural elements of forest inventories

Treesearch

Melinda Vokoun; David Wear; Robert Abt

2009-01-01

In this article we develop a methodology to test for changes in the underlying relationships between measures of forest productivity (structural elements) and site characteristics, herein referred to as structural changes, using standard forest inventories. Changes in measures of forest growing stock volume and number of trees for both...

A Simple Soil Percolation Test Device for Field Environmentalists

ERIC Educational Resources Information Center

Smith, William H.; Stark, Phillip E.

1977-01-01

A primary responsibility of field environmental health workers is evaluation of individual sewage disposal system sites. The authors of this article developed a practical, accurate, and inexpensive measurement device for obtaining reliable percolation test results. Directions for the construction and use of the device are detailed. Drawings…

Developing a Multimedia, Computer-Based Spanish Placement Test

ERIC Educational Resources Information Center

Zabaleta, Francisco

2007-01-01

Placing students of a foreign language within a basic language program constitutes an ongoing problem, particularly for large university departments when they have many incoming freshmen and transfer students. This article outlines the author's experience designing and piloting a language placement test for a university level Spanish program. The…

Development and testing of the 'Culture of Care Barometer' (CoCB) in healthcare organisations: a mixed methods study.

PubMed

Rafferty, Anne Marie; Philippou, Julia; Fitzpatrick, Joanne M; Pike, Geoff; Ball, Jane

2017-08-18

Concerns about care quality have prompted calls to create workplace cultures conducive to high-quality, safe and compassionate care and to provide a supportive environment in which staff can operate effectively. How healthcare organisations assess their culture of care is an important first step in creating such cultures. This article reports on the development and validation of a tool, the Culture of Care Barometer, designed to assess perceptions of a caring culture among healthcare workers preliminary to culture change. An exploratory mixed methods study designed to develop and test the validity of a tool to measure 'culture of care' through focus groups and questionnaires. Questionnaire development was facilitated through: a literature review, experts generating items of interest and focus group discussions with healthcare staff across specialities, roles and seniority within three types of public healthcare organisations in the UK. The tool was designed to be multiprofessional and pilot tested with a sample of 467 nurses and healthcare support workers in acute care and then validated with a sample of 1698 staff working across acute, mental health and community services in England. Exploratory factor analysis was used to identify dimensions underlying the Barometer. Psychometric testing resulted in the development of a 30-item questionnaire linked to four domains with retained items loading to four factors: organisational values (α=0.93, valid n=1568, M=3.7), team support (α=0.93, valid n=1557, M=3.2), relationships with colleagues (α=0.84, valid n=1617, M=4.0) and job constraints (α=0.70, valid n=1616, M=3.3). The study developed a valid and reliable instrument with which to gauge the different attributes of care culture perceived by healthcare staff with potential for organisational benchmarking. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Developing a Data Set and Processing Methodology for Fluid/Structure Interaction Code Validation

DTIC Science & Technology

2007-06-01

50 29. 9-Probe Wake Survey Rake Configurations...structural stability and fatigue in test article components and, in general, in facility support structures and rotating machinery blading . Both T&E... blade analysis and simulations. To ensure the accuracy of the U of CO technology, validation using flight-test data and test data from a wind tunnel

Test Equity for People Who Are Deaf or Hard-of-Hearing: Commission on Rehabilitation Counselor Certification Steps for Implementation

ERIC Educational Resources Information Center

Saladin, Shawn P.; Reid, Christine; Shiels, John

2011-01-01

The Commission on Rehabilitation Counselor Certification (CRCC) has taken a proactive stance on perceived test inequities of the Certified Rehabilitation Counselor (CRC) exam as it relates to people who are prelingually deaf and hard of hearing. This article describes the process developed and implemented by the CRCC to help maximize test equity…

Testing and Validation of the Dynamic Interia Measurement Method

NASA Technical Reports Server (NTRS)

Chin, Alexander; Herrera, Claudia; Spivey, Natalie; Fladung, William; Cloutier, David

2015-01-01

This presentation describes the DIM method and how it measures the inertia properties of an object by analyzing the frequency response functions measured during a ground vibration test (GVT). The DIM method has been in development at the University of Cincinnati and has shown success on a variety of small scale test articles. The NASA AFRC version was modified for larger applications.

Modeling and Analysis of Chill and Fill Processes for the EDU Tank

NASA Technical Reports Server (NTRS)

Hedayat, A.; Cartagena, W.; Majumdar, A. K.; Leclair, A. C.

2015-01-01

NASA's future missions may require long-term storage and transfer of cryogenic propellants. The Engineering Development Unit (EDU), a NASA in-house effort supported by both Marshall Space Flight Center (MSFC) and Glenn Research Center (GRC), is a Cryogenic Fluid Management (CFM) test article that primarily serves as a manufacturing pathfinder and a risk reduction task for a future CFM payload. The EDU test article, comprises a flight like tank, internal components, insulation, and attachment struts. The EDU is designed to perform integrated passive thermal control performance testing with liquid hydrogen in a space-like vacuum environment. A series of tests, with liquid hydrogen as a testing fluid, was conducted at Test Stand 300 at MSFC during summer of 2014. The objective of this effort was to develop a thermal/fluid model for evaluating the thermodynamic behavior of the EDU tank during the chill and fill processes. Generalized Fluid System Simulation Program (GFSSP), an MSFC in-house general-purpose computer program for flow network analysis, was utilized to model and simulate the chill and fill portion of the testing. The model contained the liquid hydrogen supply source, feed system, EDU tank, and vent system. The modeling description and comparison of model predictions with the test data will be presented in the final paper.

HIV testing updates and challenges: when regulatory caution and public health imperatives collide.

PubMed

Branson, Bernard M

2015-03-01

Numerous improvements in HIV testing technology led recently to the first revision of recommendations for diagnostic laboratory testing in the USA in 25 years. Developments in HIV testing continue to produce tests that identify HIV infection earlier with faster turnaround times for test results. These play an important role in identifying HIV infection during the highly infectious acute phase, which has implication for both patient management and public health interventions to control the spread of HIV. Access to these developments, however, is often delayed by the regulatory apparatus for approval and oversight of HIV testing in the USA. This article summarizes recent developments in HIV diagnostic testing technology, outlines their implications for clinical management and public health, describes current systems of regulatory oversight for HIV testing in the USA, and proposes alternatives that could expedite access to improved tests as they become available.

Superconducting coil development and motor demonstration: Overview

NASA Astrophysics Data System (ADS)

Gubser, D. U.

1995-12-01

Superconducting bismuth-cuprate wires, coils, and magnets are being produced by industry as part of a program to test the viability of using such magnets in Naval systems. Tests of prototype magnets, coils, and wires reveal progress in commercially produced products. The larger magnets will be installed in an existing superconducting homopolar motor and operated initially at 4.2K to test the performance. It is anticipated that approximately 400 Hp will be achieved by the motor. This article reports on the initial tests of the magnets, coils, and wires as well as the development program to improve their performance.

[Inventive activity of the Departments of Chemistry and Biochemistry of Enzymes, and Protein Structure and Function of the Palladin Institute of Biochemistry of NAS of Ukraine. Part III. Diagnostic test-systems for analysis of fibrinolysis blood system and novel approaches to thrombosis treatment].

PubMed

Danilova, V M; Vynogradova, R P; Chernysh, I Yu

2016-01-01

This article continues analysis of scientific achievements of the Institute of Biochemistry in the study of hemostasis system. Two previous articles were focused on the studies of blood coagulation proteins and development of the immune-enzyme test-systems for evaluation of the risk of thrombosis upon various pathologies. This article highlights the research on the blood fibrinolysis system and new approaches to thrombosis treatment, which were developed (and are under development) in the Palladin Institute of Biochemistry of the NAS of Ukraine, in particular, in the Department of Chemistry and Biochemistry of Enzymes headed previously by Dr.Sci.(Biol.) S. O. Kudinov and now by Dr.Sci.(Biol.) T .V. Grinenko, and also in the Department of Protein Structure and Function headed by Dr.Biol.Sci. E. M. Makogonenko. The fundamental knowledge of protein molecule functions and mechanisms of regulation of blood coagulation and fibrinolysis opens up new opportunities to diagnose hemostasis disorders and control the effectiveness of the cardiovascular disease treatment and also contributes to development of new techniques for isolation of new proteins – promising therapeutic agents.

Examining Construct Congruence for Psychometric Tests: A Note on an Extension to Binary Items and Nesting Effects.

PubMed

Raykov, Tenko; Marcoulides, George A; Dimitrov, Dimiter M; Li, Tatyana

2018-02-01

This article extends the procedure outlined in the article by Raykov, Marcoulides, and Tong for testing congruence of latent constructs to the setting of binary items and clustering effects. In this widely used setting in contemporary educational and psychological research, the method can be used to examine if two or more homogeneous multicomponent instruments with distinct components measure the same construct. The approach is useful in scale construction and development research as well as in construct validation investigations. The discussed method is illustrated with data from a scholastic aptitude assessment study.

Waterhammer Testing and Modeling of the Ares I Upper Stage Reaction Control System

NASA Technical Reports Server (NTRS)

Williams, J. Hunter; Holt, Kimberly A.

2010-01-01

NASA's Ares I rocket is the agency's first step in completing the goals of the Constellation Program, which plans to deliver a new generation of space explorers into low earth orbit for future missions to the International Space Station, the moon, and other destinations within the solar system. Ares I is a two-stage rocket topped by the Orion crew capsule and its service module. The launch vehicle's First Stage is a single, five-segment reusable solid rocket booster (RSRB), derived from the Space Shuttle Program's four segment RSRB. The vehicle's Upper Stage, being designed at Marshall Space Flight Center (MSFC), is propelled by a single J-2X Main Engine fueled with liquid oxygen and liquid hydrogen. During active Upper Stage flight of the Ares I launch vehicle, the Upper Stage Reaction Control System (US ReCS) will perform attitude control operations for the vehicle. The US ReCS will provide three-axis attitude control capability (roll, pitch, and yaw) for the Upper Stage while the J-2X is not firing and roll control capability while the engine is firing. Because of the requirements imposed upon the system, the design must accommodate rapid pulsing of multiple thrusters simultaneously to maintain attitude control. In support of these design activities and in preparation for Critical Design Review, analytical models of the US ReCS propellant feed system have been developed using the Thermal Hydraulic Library of MSC.EASY5 v.2008, herein referred to as EASY5. EASY5 is a commercially available fluid system modeling package with significant history of modeling space propulsion systems. In Fall 2009, a series of development tests were conducted at MSFC on a cold-flow test article for the US ReCS, herein referred to as System Development Test Article (SDTA). A subset of those tests performed were aimed at examining the effects of waterhammer on a flight-representative system and to ensure that those effects could be quantified with analytical models and incorporated into the design of the flight system. This paper presents an overview of the test article and the test approach, along with a discussion of the analytical modeling methodology. In addition, the results of that subset of development tests, along with analytical model pre-test predictions and post-test model correlations, will also be discussed in detail.

Using Digital Portfolios to Develop Non-Traditional Domains in Special Education Settings

ERIC Educational Resources Information Center

Clancy, Mary; Gardner, Jessica

2017-01-01

This article chronicles the development of a portfolio system used primarily to assess special education high school students on a variety of traditional and non-traditional standards and skills. Developing, capturing, sharing, and assessing student learning can be problematic when traditional testing or classroom assessment methods are not an…

Giving Psychology Away: Implementation of Wikipedia Editing in an Introductory Human Development Course

ERIC Educational Resources Information Center

Shane-Simpson, Christina; Che, Elizabeth; Brooks, Patricia J.

2016-01-01

To test the feasibility of Wikipedia editing in large undergraduate psychology classrooms, we engaged groups of students in a large introductory-level Human Development course (N = 110) in editing Wikipedia articles to improve psychology-related content. Students attended in-class workshops and received online support to develop skills. They…

Results of research on development of an intellectual information system of bankruptcy risk assessment of the enterprise

NASA Astrophysics Data System (ADS)

Telipenko, E.; Chernysheva, T.; Zakharova, A.; Dumchev, A.

2015-10-01

The article represents research results about the knowledge base development for the intellectual information system for the bankruptcy risk assessment of the enterprise. It is described the process analysis of the knowledge base development; the main process stages, some problems and their solutions are given. The article introduces the connectionist model for the bankruptcy risk assessment based on the analysis of industrial enterprise financial accounting. The basis for this connectionist model is a three-layer perceptron with the back propagation of error algorithm. The knowledge base for the intellectual information system consists of processed information and the processing operation method represented as the connectionist model. The article represents the structure of the intellectual information system, the knowledge base, and the information processing algorithm for neural network training. The paper shows mean values of 10 indexes for industrial enterprises; with the help of them it is possible to carry out a financial analysis of industrial enterprises and identify correctly the current situation for well-timed managerial decisions. Results are given about neural network testing on the data of both bankrupt and financially strong enterprises, which were not included into training and test sets.

Austin Community College Study Guide Series.

ERIC Educational Resources Information Center

Academic Therapy, 1989

1989-01-01

A series of study guides, which were developed to assist students in improving study and library skills, is reproduced for teachers' use. The guides cover test-taking skills; writing business letters; selecting a writing topic; plagiarism; developing search strategies; documentation; and locating dictionaries, periodical articles, books,…

Sasquatch Footprint Tool

NASA Technical Reports Server (NTRS)

Bledsoe, Kristin

2013-01-01

The Crew Exploration Vehicle Parachute Assembly System (CPAS) is the parachute system for NASA s Orion spacecraft. The test program consists of numerous drop tests, wherein a test article rigged with parachutes is extracted or released from an aircraft. During such tests, range safety is paramount, as is the recoverability of the parachutes and test article. It is crucial to establish an aircraft release point that will ensure that the article and all items released from it will land in safe locations. A new footprint predictor tool, called Sasquatch, was created in MATLAB. This tool takes in a simulated trajectory for the test article, information about all released objects, and atmospheric wind data (simulated or actual) to calculate the trajectories of the released objects. Dispersions are applied to the landing locations of those objects, taking into account the variability of winds, aircraft release point, and object descent rate. Sasquatch establishes a payload release point (e.g., where the payload will be extracted from the carrier aircraft) that will ensure that the payload and all objects released from it will land in a specified cleared area. The landing locations (the final points in the trajectories) are plotted on a map of the test range. Sasquatch was originally designed for CPAS drop tests and includes extensive information about both the CPAS hardware and the primary test range used for CPAS testing. However, it can easily be adapted for more complex CPAS drop tests, other NASA projects, and commercial partners. CPAS has developed the Sasquatch footprint tool to ensure range safety during parachute drop tests. Sasquatch is well correlated to test data and continues to ensure the safety of test personnel as well as the safe recovery of all equipment. The tool will continue to be modified based on new test data, improving predictions and providing added capability to meet the requirements of more complex testing.

Tools to Assess Behavioral and Social Science Competencies in Medical Education: A Systematic Review.

PubMed

Carney, Patricia A; Palmer, Ryan T; Fuqua Miller, Marissa; Thayer, Erin K; Estroff, Sue E; Litzelman, Debra K; Biagioli, Frances E; Teal, Cayla R; Lambros, Ann; Hatt, William J; Satterfield, Jason M

2016-05-01

Behavioral and social science (BSS) competencies are needed to provide quality health care, but psychometrically validated measures to assess these competencies are difficult to find. Moreover, they have not been mapped to existing frameworks, like those from the Liaison Committee on Medical Education (LCME) and Accreditation Council for Graduate Medical Education (ACGME). This systematic review aimed to identify and evaluate the quality of assessment tools used to measure BSS competencies. The authors searched the literature published between January 2002 and March 2014 for articles reporting psychometric or other validity/reliability testing, using OVID, CINAHL, PubMed, ERIC, Research and Development Resource Base, SOCIOFILE, and PsycINFO. They reviewed 5,104 potentially relevant titles and abstracts. To guide their review, they mapped BSS competencies to existing LCME and ACGME frameworks. The final included articles fell into three categories: instrument development, which were of the highest quality; educational research, which were of the second highest quality; and curriculum evaluation, which were of lower quality. Of the 114 included articles, 33 (29%) yielded strong evidence supporting tools to assess communication skills, cultural competence, empathy/compassion, behavioral health counseling, professionalism, and teamwork. Sixty-two (54%) articles yielded moderate evidence and 19 (17%) weak evidence. Articles mapped to all LCME standards and ACGME core competencies; the most common was communication skills. These findings serve as a valuable resource for medical educators and researchers. More rigorous measurement validation and testing and more robust study designs are needed to understand how educational strategies contribute to BSS competency development.

Tools to Assess Behavioral and Social Science Competencies in Medical Education: A Systematic Review

PubMed Central

Carney, Patricia A.; Palmer, Ryan T.; Miller, Marissa Fuqua; Thayer, Erin K.; Estroff, Sue E.; Litzelman, Debra K.; Biagioli, Frances E.; Teal, Cayla R.; Lambros, Ann; Hatt, William J.; Satterfield, Jason M.

2015-01-01

Purpose Behavioral and social science (BSS) competencies are needed to provide quality health care, but psychometrically validated measures to assess these competencies are difficult to find. Moreover, they have not been mapped to existing frameworks, like those from the Liaison Committee on Medical Education (LCME) and Accreditation Council for Graduate Medical Education (ACGME). This systematic review aimed to identify and evaluate the quality of assessment tools used to measure BSS competencies. Method The authors searched the literature published between January 2002 and March 2014 for articles reporting psychometric or other validity/reliability testing, using OVID, CINAHL, PubMed, ERIC, Research and Development Resource Base, SOCIOFILE, and PsycINFO. They reviewed 5,104 potentially relevant titles and abstracts. To guide their review, they mapped BSS competencies to existing LCME and ACGME frameworks. The final, included articles fell into three categories: instrument development, which were of the highest quality; educational research, which were of the second highest quality; and curriculum evaluation, which were of lower quality. Results Of the 114 included articles, 33 (29%) yielded strong evidence supporting tools to assess communication skills, cultural competence, empathy/compassion, behavioral health counseling, professionalism, and teamwork. Sixty-two (54%) articles yielded moderate evidence and 19 (17%) weak evidence. Articles mapped to all LCME standards and ACGME core competencies; the most common was communication skills. Conclusions These findings serve as a valuable resource for medical educators and researchers. More rigorous measurement validation and testing and more robust study designs are needed to understand how educational strategies contribute to BSS competency development. PMID:26796091

Ultrasonic Nondestructive Evaluation of PRSEUS Pressure Cube Article in Support of Load Test to Failure

NASA Technical Reports Server (NTRS)

Johnston, Patrick H.

2013-01-01

The PRSEUS Pressure Cube Test was a joint development effort between the Boeing Company and NASA Langley Research Center, sponsored in part by the Environmentally Responsible Aviation Project and Boeing internal R&D. This Technical Memorandum presents the results of ultrasonic inspections in support of the PRSEUS Pressure Cube Test, and is a companion document with the NASA test report and a report on the acoustic emission measurements made during the test.

Hypersonic Inflatable Aerodynamic Decelerator (HIAD) Technology Development Overview

NASA Technical Reports Server (NTRS)

Hughes, Stephen J.; Cheatwood, F. McNeil; Calomino, Anthony M.; Wright, Henry S.

2013-01-01

The successful flight of the Inflatable Reentry Vehicle Experiment (IRVE)-3 has further demonstrated the potential value of Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology. This technology development effort is funded by NASA's Space Technology Mission Directorate (STMD) Game Changing Development Program (GCDP). This paper provides an overview of a multi-year HIAD technology development effort, detailing the projects completed to date and the additional testing planned for the future. The effort was divided into three areas: Flexible Systems Development (FSD), Mission Advanced Entry Concepts (AEC), and Flight Validation. FSD consists of a Flexible Thermal Protection Systems (FTPS) element, which is investigating high temperature materials, coatings, and additives for use in the bladder, insulator, and heat shield layers; and an Inflatable Structures (IS) element which includes manufacture and testing (laboratory and wind tunnel) of inflatable structures and their associated structural elements. AEC consists of the Mission Applications element developing concepts (including payload interfaces) for missions at multiple destinations for the purpose of demonstrating the benefits and need for the HIAD technology as well as the Next Generation Subsystems element. Ground test development has been pursued in parallel with the Flight Validation IRVE-3 flight test. A larger scale (6m diameter) HIAD inflatable structure was constructed and aerodynamically tested in the National Full-scale Aerodynamics Complex (NFAC) 40ft by 80ft test section along with a duplicate of the IRVE-3 3m article. Both the 6m and 3m articles were tested with instrumented aerodynamic covers which incorporated an array of pressure taps to capture surface pressure distribution to validate Computational Fluid Dynamics (CFD) model predictions of surface pressure distribution. The 3m article also had a duplicate IRVE-3 Thermal Protection System (TPS) to test in addition to testing with the Aerocover configuration. Both the Aerocovers and the TPS were populated with high contrast targets so that photogrammetric solutions of the loaded surface could be created. These solutions both refined the aerodynamic shape for CFD modeling and provided a deformed shape to validate structural Finite Element Analysis (FEA) models. Extensive aerothermal testing has been performed on the TPS candidates. This testing has been conducted in several facilities across the country. The majority of the testing has been conducted in the Boeing Large Core Arc Tunnel (LCAT). HIAD is continuing to mature testing methodology in this facility and is developing new test sample fixtures and control methodologies to improve understanding and quality of the environments to which the samples are subjected. Additional testing has been and continues to be performed in the NASA LaRC 8ft High Temperature Tunnel, where samples up to 2ft by 2ft are being tested over representative underlying structures incorporating construction features such as sewn seams and through-thickness quilting. With the successful completion to the IRVE-3 flight demonstration, mission planning efforts are ramping up on the development of the HIAD Earth Atmospheric Reenty Test (HEART) which will demonstrate a relevant scale vehicle in relevant environments via a large-scale aeroshell (approximately 8.5m) entering at orbital velocity (approximately 7km/sec) with an entry mass on the order of 4MT. Also, the Build to Print (BTP) hardware built as a risk mitigation for the IRVE-3 project to have a "spare" ready to go in the event of a launch vehicle delivery failure is now available for an additional sub-orbital flight experiment. Mission planning is underway to define a mission that can utilize this existing hardware and help the HIAD project further mature this technology.

Building and testing a patient-centric electronic bedside communication center.

PubMed

Dykes, Patricia C; Carroll, Diane L; Hurley, Ann C; Benoit, Angela; Chang, Frank; Pozzar, Rachel; Caligtan, Christine A

2013-01-01

In this article, the authors describe the development and pilot testing of an electronic bedside communication center (eBCC) prototype to improve access to health information for hospitalized adults and their family caregivers. Focus groups were used to identify improvements for the initial eBCC prototype developed by the research team. Face-to-face bedside interviews and questions were presented while patients used the eBCC for usability testing to drive further development. Qualitative methods within an iterative, participatory approach supported the development of an eBCC prototype that was considered both easy to use and helpful for accessing tailored patient information during an inpatient hospitalization to receive acute care. Copyright 2013, SLACK Incorporated.

Speaking and Listening in Content Area Learning

ERIC Educational Resources Information Center

Fisher, Douglas; Frey, Nancy

2014-01-01

Oral language development facilitates print literacy. In this article, we focus on the ways in which teachers can ensure students' speaking and listening skills are developed. We provide a review of some time-tests classroom routines as well as some that can be enhanced with technology.

21 CFR 58.107 - Test and control article handling.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Test and control article handling. 58.107 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.107 Test and control article handling. Procedures shall be established for a system for the handling of the test and...

21 CFR 58.107 - Test and control article handling.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Test and control article handling. 58.107 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.107 Test and control article handling. Procedures shall be established for a system for the handling of the test and...

21 CFR 58.107 - Test and control article handling.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Test and control article handling. 58.107 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.107 Test and control article handling. Procedures shall be established for a system for the handling of the test and...

21 CFR 58.107 - Test and control article handling.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Test and control article handling. 58.107 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.107 Test and control article handling. Procedures shall be established for a system for the handling of the test and...

Strain, Attribution, and Traffic Delinquency among Young Drivers: Measuring and Testing General Strain Theory in the Context of Driving

ERIC Educational Resources Information Center

Ellwanger, Steven J.

2007-01-01

This article enhances our knowledge of general strain theory (GST) by applying it to the context of traffic delinquency. It does so by first describing and confirming the development of a social-psychological measure allowing for a test of GST. Structural regression analysis is subsequently employed to test the theory within this context across a…

Processes and Procedures for Estimating Score Reliability and Precision

ERIC Educational Resources Information Center

Bardhoshi, Gerta; Erford, Bradley T.

2017-01-01

Precision is a key facet of test development, with score reliability determined primarily according to the types of error one wants to approximate and demonstrate. This article identifies and discusses several primary forms of reliability estimation: internal consistency (i.e., split-half, KR-20, a), test-retest, alternate forms, interscorer, and…

Testing Mediation Using Multiple Regression and Structural Equation Modeling Analyses in Secondary Data

ERIC Educational Resources Information Center

Li, Spencer D.

2011-01-01

Mediation analysis in child and adolescent development research is possible using large secondary data sets. This article provides an overview of two statistical methods commonly used to test mediated effects in secondary analysis: multiple regression and structural equation modeling (SEM). Two empirical studies are presented to illustrate the…

Language Assessment: Its Development and Future--An Interview with Lyle F. Bachman

ERIC Educational Resources Information Center

Chen, Jing

2011-01-01

Lyle F. Bachman is Professor, Department of Applied Linguistics, University of California, Los Angeles. He is a past president of the American Association for Applied Linguistics and of the International Language Testing Association. He has published numerous articles and books in the areas of language testing, program evaluation, and second…

Components of Spatial Thinking: Evidence from a Spatial Thinking Ability Test

ERIC Educational Resources Information Center

Lee, Jongwon; Bednarz, Robert

2012-01-01

This article introduces the development and validation of the spatial thinking ability test (STAT). The STAT consists of sixteen multiple-choice questions of eight types. The STAT was validated by administering it to a sample of 532 junior high, high school, and university students. Factor analysis using principal components extraction was applied…

The Grade 3 Provincial Achievement Tests: In Need of Revamping?

ERIC Educational Resources Information Center

Roessingh, Hetty

2012-01-01

This article advances an argument for retaining but revamping the grade 3 Provincial Achievement Tests (PATs). Alberta's demographic landscape is rapidly changing to include significant numbers of English language learners who are still in the early stages of developing English language proficiency at grade 3. Online tools are used to generate…

Development of Polarized UV Raman and Infrared Emission/Absorption Spectroscopy for Rocket Engine Applications

NASA Technical Reports Server (NTRS)

Osborne, Robin; Wehrmeyer, Joseph; Farmer, Richard; Trinh, Huu; Dobson, Chris; Eskridge, Richard; Cramer, John; Hartfield, Roy; Turner, Jim (Technical Monitor)

2001-01-01

The objective of this project is to provide measurements of species concentrations and temperature for hot-fire test articles at Test Stand 115 at NASA Marshall Space Flight Center. Measurements can be useful for comparison to computational fluid dynamics simulations and help to evaluate combustion performance.

Stochastic Models of Quality Control on Test Misgrading.

ERIC Educational Resources Information Center

Wang, Jianjun

Stochastic models are developed in this article to examine the rate of test misgrading in educational and psychological measurement. The estimation of inadvertent grading errors can serve as a basis for quality control in measurement. Limitations of traditional Poisson models have been reviewed to highlight the need to introduce new models using…

Failure mechanism characterization of platinum alloy

NASA Technical Reports Server (NTRS)

Rosen, J. M.; Mcfarlen, W. T.

1986-01-01

This article describes procedures and results of testing performed on a platinum/10-percent rhodium, thin-wall tubular product. The purpose of the testing was to develop exemplar SEM fractographs to be used to characterize failures under various environmental conditions. Conditions evaluated for the platinum alloys included high temperature, hydrogen environment, braze metal contamination, and cyclic loading.

Beyond Performance Results: Analyzing the Informational and Developmental Potentials of Standardized Mathematics Tests

ERIC Educational Resources Information Center

di Martino, Pietro; Baccaglini-Frank, Anna

2017-01-01

In this article, we discuss the potential of a critical approach to standardized tests and their results. In particular, we explore and discuss this potential not only for the assessment of students' mathematical competence, but also for teachers' professional development. We identify and describe two kinds of potential: the Informational…

The Politics of Testing in South Africa

ERIC Educational Resources Information Center

Chisholm, Linda; Wildeman, Russell

2013-01-01

This article considers the politics of adoption of a testing regime in South Africa. While the broad features of this regime are similar to those in developed countries, there are features specific to the South African context. These emerge from a combination of external and internal pressures. External pressures derive from international testing…

Basics of Sterile Compounding: Particulate Matter.

PubMed

Akers, Michael J

2017-01-01

This article focuses on the requirements for particulate matter in sterile products. Topics include particles and quality, particulate matter standards (large- and small-volume injectables), development of the small-volume injectable test, electronic (light obscuration) and microscope testing, and special requirements for particulate matter in biopharmaceutical preparations. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

GED Items. The Newsletter of the GED Testing Service, 1998.

ERIC Educational Resources Information Center

American Council on Education, Washington, DC. General Educational Development Testing Service.

This document consists of the five issues of the newsletter of the General Educational Development (GED) Testing Service: January/February, March/April, May/June, September/October, and November/December. Each issue contains information of interest to users of the GED examinations. The feature article for the January/February issue is "Next…

U.S. National Certification in Literary Braille: History and Current Administration

ERIC Educational Resources Information Center

Bell, Edward

2010-01-01

This article reports on a certification examination for teachers of students with visual impairments--the National Literary Braille Competency Test (NLBCT). It discusses the history, development, pilot testing, and validation of NLBCT and the creation of the National Certification in Literary Braille. Data on the current administration of the test…

A Permutation Test for Correlated Errors in Adjacent Questionnaire Items

ERIC Educational Resources Information Center

Hildreth, Laura A.; Genschel, Ulrike; Lorenz, Frederick O.; Lesser, Virginia M.

2013-01-01

Response patterns are of importance to survey researchers because of the insight they provide into the thought processes respondents use to answer survey questions. In this article we propose the use of structural equation modeling to examine response patterns and develop a permutation test to quantify the likelihood of observing a specific…

Instrumentation for the Characterization of Inflatable Structures

NASA Technical Reports Server (NTRS)

Swanson, Gregory T.; Cassell, Alan M.; Johnson, R. Keith

2012-01-01

Current entry, descent, and landing technologies are not practical for heavy payloads due to mass and volume constraints dictated by limitations imposed by launch vehicle fairings. Therefore, new technologies are now being explored to provide a mass- and volume-efficient solution for heavy payload capabilities, including Inflatable Aerodynamic Decelerators (IAD) [1]. Consideration of IADs for space applications has prompted the development of instrumentation systems for integration with flexible structures to characterize system response to flight-like environment testing. This development opportunity faces many challenges specific to inflatable structures in extreme environments, including but not limited to physical flexibility, packaging, temperature, structural integration and data acquisition [2]. In the spring of 2012, two large scale Hypersonic Inflatable Aerodynamic Decelerators (HIAD) will be tested in the National Full-Scale Aerodynamics Complex s 40 by 80 wind tunnel at NASA Ames Research Center. The test series will characterize the performance of a 3.0 m and 6.0 m HIAD at various angles of attack and levels of inflation during flight-like loading. To analyze the performance of these inflatable test articles as they undergo aerodynamic loading, many instrumentation systems have been researched and developed. These systems will utilize new experimental sensing systems developed by the HIAD ground test campaign instrumentation team, in addition to traditional wind tunnel sensing techniques in an effort to improve test article characterization and model validation. During the 2012 test series the instrumentation systems will target inflatable aeroshell static and dynamic deformation, structural strap loading, surface pressure distribution, localized skin deflection, and torus inflation pressure. This paper will offer an overview of inflatable structure instrumentation, and provide detail into the design and implementation of the sensors systems that will be utilized during the 2012 HIAD ground test campaign.

Verification and Validation Process for Progressive Damage and Failure Analysis Methods in the NASA Advanced Composites Consortium

NASA Technical Reports Server (NTRS)

Wanthal, Steven; Schaefer, Joseph; Justusson, Brian; Hyder, Imran; Engelstad, Stephen; Rose, Cheryl

2017-01-01

The Advanced Composites Consortium is a US Government/Industry partnership supporting technologies to enable timeline and cost reduction in the development of certified composite aerospace structures. A key component of the consortium's approach is the development and validation of improved progressive damage and failure analysis methods for composite structures. These methods will enable increased use of simulations in design trade studies and detailed design development, and thereby enable more targeted physical test programs to validate designs. To accomplish this goal with confidence, a rigorous verification and validation process was developed. The process was used to evaluate analysis methods and associated implementation requirements to ensure calculation accuracy and to gage predictability for composite failure modes of interest. This paper introduces the verification and validation process developed by the consortium during the Phase I effort of the Advanced Composites Project. Specific structural failure modes of interest are first identified, and a subset of standard composite test articles are proposed to interrogate a progressive damage analysis method's ability to predict each failure mode of interest. Test articles are designed to capture the underlying composite material constitutive response as well as the interaction of failure modes representing typical failure patterns observed in aerospace structures.

Computer-based testing: initial report of extensive use in a medical school curriculum.

PubMed

Peterson, Michael W; Gordon, Joel; Elliott, Scott; Kreiter, Clarence

2004-01-01

Computer-based digital technology offers many opportunities in medical education. One type of digital technology, computer-based testing (CBT), has potentially wide application in undergraduate, graduate, and continuing medical education. This articles describes the development of CBT in an undergraduate medical curriculum. An early step in evaluating CBT is to be sure that the exam format is measuring the examinees' knowledge and not their comfort level or confidence with the technology. It is, therefore, important that the CBT reproduce or accommodate traditional test-taking behavior. CBT also provides for a number of enhancements not easily achieved with traditional paper-and-pencil exams. These include easier control and editing of exam items, better incorporation of testing into the learning environment using specific feedback, and enhancing the questions by incorporating multimedia. CBT does present some unique challenges in testing security, and this article discusses the approach to the security issues. In addition, before initiating CBT into a medical curriculum, the institution must understand the technical and infrastructure requirements for CBT. By providing a 5-year experience with CBT in the medical curriculum, this article hopes to facilitate discussions among medical educators in its appropriate application and evaluation.

Nuclear Thermal Rocket Element Environmental Simulator (NTREES)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Emrich, William J. Jr.

2008-01-21

To support a potential future development of a nuclear thermal rocket engine, a state-of-the-art non nuclear experimental test setup has been constructed to evaluate the performance characteristics of candidate fuel element materials and geometries in representative environments. The test device simulates the environmental conditions (minus the radiation) to which nuclear rocket fuel components could be subjected during reactor operation. Test articles mounted in the simulator are inductively heated in such a manner as to accurately reproduce the temperatures and heat fluxes normally expected to occur as a result of nuclear fission while at the same time being exposed to flowingmore » hydrogen. This project is referred to as the Nuclear Thermal Rocket Element Environment Simulator or NTREES. The NTREES device is located at the Marshall Space flight Center in a laboratory which has been modified to accommodate the high powers required to heat the test articles to the required temperatures and to handle the gaseous hydrogen flow required for the tests. Other modifications to the laboratory include the installation of a nitrogen gas supply system and a cooling water supply system. During the design and construction of the facility, every effort was made to comply with all pertinent regulations to provide assurance that the facility could be operated in a safe and efficient manner. The NTREES system can currently supply up to 50 kW of inductive heating to the fuel test articles, although the facility has been sized to eventually allow test article heating levels of up to several megawatts.« less

Computer Administering of the Psychological Investigations: Set-Relational Representation

NASA Astrophysics Data System (ADS)

Yordzhev, Krasimir

Computer administering of a psychological investigation is the computer representation of the entire procedure of psychological assessments - test construction, test implementation, results evaluation, storage and maintenance of the developed database, its statistical processing, analysis and interpretation. A mathematical description of psychological assessment with the aid of personality tests is discussed in this article. The set theory and the relational algebra are used in this description. A relational model of data, needed to design a computer system for automation of certain psychological assessments is given. Some finite sets and relation on them, which are necessary for creating a personality psychological test, are described. The described model could be used to develop real software for computer administering of any psychological test and there is full automation of the whole process: test construction, test implementation, result evaluation, storage of the developed database, statistical implementation, analysis and interpretation. A software project for computer administering personality psychological tests is suggested.

Pearson's chi-square test and rank correlation inferences for clustered data.

PubMed

Shih, Joanna H; Fay, Michael P

2017-09-01

Pearson's chi-square test has been widely used in testing for association between two categorical responses. Spearman rank correlation and Kendall's tau are often used for measuring and testing association between two continuous or ordered categorical responses. However, the established statistical properties of these tests are only valid when each pair of responses are independent, where each sampling unit has only one pair of responses. When each sampling unit consists of a cluster of paired responses, the assumption of independent pairs is violated. In this article, we apply the within-cluster resampling technique to U-statistics to form new tests and rank-based correlation estimators for possibly tied clustered data. We develop large sample properties of the new proposed tests and estimators and evaluate their performance by simulations. The proposed methods are applied to a data set collected from a PET/CT imaging study for illustration. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

The Child Sport Concussion Assessment Tool 5th Edition (Child SCAT5): Background and rationale.

PubMed

Davis, Gavin A; Purcell, Laura; Schneider, Kathryn J; Yeates, Keith Owen; Gioia, Gerard A; Anderson, Vicki; Ellenbogen, Richard G; Echemendia, Ruben J; Makdissi, Michael; Sills, Allen; Iverson, Grant L; Dvořák, Jiří; McCrory, Paul; Meeuwisse, Willem; Patricios, Jon; Giza, Christopher C; Kutcher, Jeffrey S

2017-06-01

This article presents the Child Sport Concussion Assessment Tool 5th Edition (Child SCAT5). The Sport Concussion Assessment Tool was introduced in 2004, following the 2nd International Conference on Concussion in Sport in Prague, Czech Republic. Following the 4th International Consensus Conference, held in Zurich, Switzerland, in 2012, the SCAT 3rd edition (Child SCAT3) was developed for children aged between 5 and12 years. Research to date was reviewed and synthesised for the 5th International Consensus Conference on Concussion in Sport in Berlin, Germany, leading to the current revision of the test, the Child SCAT5. This article describes the development of the Child SCAT5. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Patient passport.

PubMed

2014-11-01

This article outlines the development, testing and evaluation of a patient passport designed specifically for people with severe asthma, who often prefer to self-manage rather than attend emergency services, and thereby put their lives at risk.

Development of Test Article Building Block (TABB) for deployable platform systems

NASA Technical Reports Server (NTRS)

Greenberg, H. S.; Barbour, R. T.

1984-01-01

The concept of a Test Article Building Block (TABB) is described. The TABB is a ground test article that is representative of a future building block that can be used to construct LEO and GEO deployable space platforms for communications and scientific payloads. This building block contains a main housing within which the entire structure, utilities, and deployment/retraction mechanism are stowed during launch. The end adapter secures the foregoing components to the housing during launch. The main housing and adapter provide the necessary building-block-to-building-block attachments for automatically deployable platforms. Removal from the shuttle cargo bay can be accomplished with the remote manipulator system (RMS) and/or the handling and positioning aid (HAPA). In this concept, all the electrical connections are in place prior to launch with automatic latches for payload attachment provided on either the end adapters or housings. The housings also can contain orbiter docking ports for payload installation and maintenance.

Development of a researcher codebook for use in evaluating social networking site profiles.

PubMed

Moreno, Megan A; Egan, Katie G; Brockman, Libby

2011-07-01

Social networking sites (SNSs) are immensely popular and allow for the display of personal information, including references to health behaviors. Evaluating displayed content on an SNS for research purposes requires a systematic approach and a precise data collection instrument. The purpose of this article is to describe one approach to the development of a research codebook so that others may develop and test their own codebooks for use in SNS research. Our SNS research codebook began on the basis of health behavior theory and clinical criteria. Key elements in the codebook developmental process included an iterative team approach and an emphasis on confidentiality. Codebook successes include consistently high inter-rater reliability. Challenges include time investment in coder training and SNS server changes. We hope that this article will provide detailed information about one systematic approach to codebook development so that other researchers may use this structure to develop and test their own codebooks for use in SNS research. Copyright © 2011 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Strengthening Theoretical Testing in Criminology Using Agent-based Modeling.

PubMed

Johnson, Shane D; Groff, Elizabeth R

2014-07-01

The Journal of Research in Crime and Delinquency ( JRCD ) has published important contributions to both criminological theory and associated empirical tests. In this article, we consider some of the challenges associated with traditional approaches to social science research, and discuss a complementary approach that is gaining popularity-agent-based computational modeling-that may offer new opportunities to strengthen theories of crime and develop insights into phenomena of interest. Two literature reviews are completed. The aim of the first is to identify those articles published in JRCD that have been the most influential and to classify the theoretical perspectives taken. The second is intended to identify those studies that have used an agent-based model (ABM) to examine criminological theories and to identify which theories have been explored. Ecological theories of crime pattern formation have received the most attention from researchers using ABMs, but many other criminological theories are amenable to testing using such methods. Traditional methods of theory development and testing suffer from a number of potential issues that a more systematic use of ABMs-not without its own issues-may help to overcome. ABMs should become another method in the criminologists toolbox to aid theory testing and falsification.

Experimental Validation of the Dynamic Inertia Measurement Method to Find the Mass Properties of an Iron Bird Test Article

NASA Technical Reports Server (NTRS)

Chin, Alexander W.; Herrera, Claudia Y.; Spivey, Natalie D.; Fladung, William A.; Cloutier, David

2015-01-01

The mass properties of an aerospace vehicle are required by multiple disciplines in the analysis and prediction of flight behavior. Pendulum oscillation methods have been developed and employed for almost a century as a means to measure mass properties. However, these oscillation methods are costly, time consuming, and risky. The NASA Armstrong Flight Research Center has been investigating the Dynamic Inertia Measurement, or DIM method as a possible alternative to oscillation methods. The DIM method uses ground test techniques that are already applied to aerospace vehicles when conducting modal surveys. Ground vibration tests would require minimal additional instrumentation and time to apply the DIM method. The DIM method has been validated on smaller test articles, but has not yet been fully proven on large aerospace vehicles.

Virtual Vocabulary: Research and Learning in Lexical Processing

ERIC Educational Resources Information Center

Schuetze, Ulf; Weimer-Stuckmann, Gerlinde

2010-01-01

This article presents the concept development, research programming, and learning design of a lexical processing web application, Virtual Vocabulary, which was developed using theories in both cognitive psychology and second language acquisition (SLA). It is being tested with first-year students of German at the University of Victoria in Canada,…

Is Your Child at Risk for Lead Poisoning?

ERIC Educational Resources Information Center

Berg, Nancy

1992-01-01

Lead poisoning is the number one environmental threat to children. At low levels it harms development, damages blood cells, and lowers IQ. At higher levels, it damages the nervous system, kidneys, reproductive system, and mental development. The article examines risk factors and discusses contamination, testing for lead, and prevention. (SM)

Mothers' Estimates of Their Children with Disorders of Language Development

ERIC Educational Resources Information Center

Willinger, Ulrike; Eisenwort, Brigitte

2005-01-01

The authors' objective in this article was to explore the accuracy of mothers' estimates concerning their children's developmental functioning, especially with respect to vocabulary and gross motor development, by comparing the results of diagnostic tests administered to both the children and their mothers. The authors studied 55 children with…

The Feminist Supervision Scale: A Rational/Theoretical Approach

ERIC Educational Resources Information Center

Szymanski, Dawn M.

2003-01-01

This article reports the development and psychometric properties of the Feminist Supervision Scale (FSS), a new scale designed to assess feminist supervision practices in clinical supervision. This 32-item measure was developed using a rational/theoretical approach of test construction and includes four subscales: (a) collaborative relationships,…

Concept Recognition in an Automatic Text-Processing System for the Life Sciences.

ERIC Educational Resources Information Center

Vleduts-Stokolov, Natasha

1987-01-01

Describes a system developed for the automatic recognition of biological concepts in titles of scientific articles; reports results of several pilot experiments which tested the system's performance; analyzes typical ambiguity problems encountered by the system; describes a disambiguation technique that was developed; and discusses future plans…

Development and Initial Psychometrics of the Counselor Burnout Inventory

ERIC Educational Resources Information Center

Lee, Sang Min; Baker, Crystal R.; Cho, Seong Ho; Heckathorn, Danette E.; Holland, Michael W.; Newgent, Rebecca A.; Ogle, Nick T.; Powell, Michael L.; Quinn, James J.; Wallace, Sam L.; Yu, Kumlan

2007-01-01

This article describes the development and psychometric properties of the Counselor Burnout Inventory (CBI), which is designed to meet the needs of the counseling profession by assessing burnout in counselors. Factor structure, concurrent validity, internal consistency, and test-retest reliability of the CBI scores are reported. Implications for…

Development of a Culturally Valid Counselor Burnout Inventory for Korean Counselors

ERIC Educational Resources Information Center

Yu, Kumlan; Lee, Sang Min; Nesbit, Elisabeth A.

2008-01-01

This article describes the development of the culturally valid Counselor Burnout Inventory. A multistage approach including item translation; item refinement; and evaluation of factorial validity, reliability, and score validity was used to test constructs and validation. Implications for practice and future research are discussed. (Contains 3…

The Mystery Tubes: Teaching Pupils about Hypothetical Modelling

ERIC Educational Resources Information Center

Kenrick, Carole

2017-01-01

This article recounts the author's working experience of one method by which pupils' understanding of the epistemologies of science can be developed, specifically how scientists can develop hypothetical models and test them through simulations. She currently uses this approach for transition lessons with pupils in upper primary or lower secondary…

Laboratories and Demonstrations in Child Development with Unedited Videotapes.

ERIC Educational Resources Information Center

Poole, Debra Ann

1986-01-01

Multipurpose demonstrations of child development are easy to produce by videotaping children while they interact with parents, siblings, or friends. Unlike commercial films, videotapes without narration allow students to formulate and test their own research questions. This article describes how to use unedited videotapes for laboratories in…

A Data System for a Rapid Evaluation Class of Subscale Aerial Vehicle

NASA Technical Reports Server (NTRS)

Hogge, Edward F.; Quach, Cuong C.; Vazquez, Sixto L.; Hill, Boyd L.

2011-01-01

A low cost, rapid evaluation, test aircraft is used to develop and test airframe damage diagnosis algorithms at Langley Research Center as part of NASA's Aviation Safety Program. The remotely operated subscale aircraft is instrumented with sensors to monitor structural response during flight. Data is collected for good and compromised airframe configurations to develop data driven models for diagnosing airframe state. This paper describes the data acquisition system (DAS) of the rapid evaluation test aircraft. A PC/104 form factor DAS was developed to allow use of Matlab, Simulink simulation code in Langley's existing subscale aircraft flight test infrastructure. The small scale of the test aircraft permitted laboratory testing of the actual flight article under controlled conditions. The low cost and modularity of the DAS permitted adaptation to various flight experiment requirements.

A Case Study on an Item Writing Process: Use of Test Specifications, Nature of Group Dynamics, and Individual Item Writers' Characteristics

ERIC Educational Resources Information Center

Kim, Jiyoung; Chi, Youngshin; Huensch, Amanda; Jun, Heesung; Li, Hongli; Roullion, Vanessa

2010-01-01

This article discusses a case study on an item writing process that reflects on our practical experience in an item development project. The purpose of the article is to share our lessons from the experience aiming to demystify item writing process. The study investigated three issues that naturally emerged during the project: how item writers use…

Testing of a Stitched Composite Large-Scale Multi-Bay Pressure Box

NASA Technical Reports Server (NTRS)

Jegley, Dawn; Rouse, Marshall; Przekop, Adam; Lovejoy, Andrew

2016-01-01

NASA has created the Environmentally Responsible Aviation (ERA) Project to develop technologies to reduce aviation's impact on the environment. A critical aspect of this pursuit is the development of a lighter, more robust airframe to enable the introduction of unconventional aircraft configurations. NASA and The Boeing Company have worked together to develop a structural concept that is lightweight and an advancement beyond state-of-the-art composite structures. The Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) is an integrally stiffened panel design where elements are stitched together. The PRSEUS concept is designed to maintain residual load carrying capabilities under a variety of damage scenarios. A series of building block tests were evaluated to explore the fundamental assumptions related to the capability and advantages of PRSEUS panels. The final step in the building block series is an 80%-scale pressure box representing a portion of the center section of a Hybrid Wing Body (HWB) transport aircraft. The testing of this article under maneuver load and internal pressure load conditions is the subject of this paper. The experimental evaluation of this article, along with the other building block tests and the accompanying analyses, has demonstrated the viability of a PRSEUS center body for the HWB vehicle. Additionally, much of the development effort is also applicable to traditional tube-and-wing aircraft, advanced aircraft configurations, and other structures where weight and through-the-thickness strength are design considerations.

Five un-easy pieces of pharmaceutical policy reform.

PubMed

Rodwin, Marc A

2013-01-01

Improper dependencies slant policy over a drug's life span, biasing the development of new drugs, the testing and marketing approval for new drugs, and the monitoring of patient safety after drugs are marketed. This article examines five ways in which the public improperly depends on pharmaceutical firms that compromise the integrity of pharmaceutical policy. Today the public relies on pharmaceutical firms: (1) to set priorities on drug research and development; (2) to conduct clinical trials to test whether drugs are safe and effective; (3) to decide what clinical trial data to disclose to the public; (4) to monitor post marketing drug safety; (5) to supply product information to physicians and to finance continuing medical education and other professional activities. The article suggests options to overcome each of these dependencies. © 2013 American Society of Law, Medicine & Ethics, Inc.

21 CFR 58.105 - Test and control article characterization.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Test and control article characterization. 58.105... GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.105 Test and control article characterization. (a) The identity, strength, purity, and composition or other...

21 CFR 58.105 - Test and control article characterization.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Test and control article characterization. 58.105... GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.105 Test and control article characterization. (a) The identity, strength, purity, and composition or other...

21 CFR 58.105 - Test and control article characterization.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Test and control article characterization. 58.105... GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.105 Test and control article characterization. (a) The identity, strength, purity, and composition or other...

21 CFR 58.105 - Test and control article characterization.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Test and control article characterization. 58.105... GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.105 Test and control article characterization. (a) The identity, strength, purity, and composition or other...

21 CFR 58.105 - Test and control article characterization.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Test and control article characterization. 58.105... GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.105 Test and control article characterization. (a) The identity, strength, purity, and composition or other...

Interactive visualisation for interpreting diagnostic test accuracy study results.

PubMed

Fanshawe, Thomas R; Power, Michael; Graziadio, Sara; Ordóñez-Mena, José M; Simpson, John; Allen, Joy

2018-02-01

Information about the performance of diagnostic tests is typically presented in the form of measures of test accuracy such as sensitivity and specificity. These measures may be difficult to translate directly into decisions about patient treatment, for which information presented in the form of probabilities of disease after a positive or a negative test result may be more useful. These probabilities depend on the prevalence of the disease, which is likely to vary between populations. This article aims to clarify the relationship between pre-test (prevalence) and post-test probabilities of disease, and presents two free, online interactive tools to illustrate this relationship. These tools allow probabilities of disease to be compared with decision thresholds above and below which different treatment decisions may be indicated. They are intended to help those involved in communicating information about diagnostic test performance and are likely to be of benefit when teaching these concepts. A substantive example is presented using C reactive protein as a diagnostic marker for bacterial infection in the older adult population. The tools may also be useful for manufacturers of clinical tests in planning product development, for authors of test evaluation studies to improve reporting and for users of test evaluations to facilitate interpretation and application of the results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

High-Temperature Modal Survey of a Hot-Structure Control Surface

NASA Technical Reports Server (NTRS)

Spivey, Natalie Dawn

2010-01-01

Ground vibration tests or modal surveys are routinely conducted for supporting flutter analysis for subsonic and supersonic vehicles; however, for hypersonic vehicle applications, thermoelastic vibration testing techniques are not well established and are not routinely performed for supporting hypersonic flutter analysis. New high-temperature material systems, fabrication technologies and high-temperature sensors expand the opportunities to develop advanced techniques for performing ground vibration tests at elevated temperatures. High-temperature materials have the unique property of increasing in stiffness when heated. When these materials are incorporated into a hot-structure, which includes metallic components that decrease in stiffness with increasing temperature, the interaction between the two materials systems needs to be understood because that interaction could ultimately affect the hypersonic flutter analysis. Performing a high-temperature modal survey will expand the research database for hypersonics and will help build upon the understanding of the dual material interaction. This paper will discuss the vibration testing of the Carbon-Silicon Carbide Ruddervator Subcomponent Test Article which is a truncated version of the full-scale X-37 hot-structure control surface. In order to define the modal characteristics of the test article during the elevated-temperature modal survey, two series of room-temperature modal test configurations had to be performed. The room-temperature test series included one with the test article suspended from a bungee cord (free-free) and the second with it mounted on the strongback (fixed boundary condition) in NASA Dryden's Flight Loads Lab large nitrogen test chamber.

Validity and Reliability of Published Comprehensive Theory of Mind Tests for Normal Preschool Children: A Systematic Review.

PubMed

Ziatabar Ahmadi, Seyyede Zohreh; Jalaie, Shohreh; Ashayeri, Hassan

2015-09-01

Theory of mind (ToM) or mindreading is an aspect of social cognition that evaluates mental states and beliefs of oneself and others. Validity and reliability are very important criteria when evaluating standard tests; and without them, these tests are not usable. The aim of this study was to systematically review the validity and reliability of published English comprehensive ToM tests developed for normal preschool children. We searched MEDLINE (PubMed interface), Web of Science, Science direct, PsycINFO, and also evidence base Medicine (The Cochrane Library) databases from 1990 to June 2015. Search strategy was Latin transcription of 'Theory of Mind' AND test AND children. Also, we manually studied the reference lists of all final searched articles and carried out a search of their references. Inclusion criteria were as follows: Valid and reliable diagnostic ToM tests published from 1990 to June 2015 for normal preschool children; and exclusion criteria were as follows: the studies that only used ToM tests and single tasks (false belief tasks) for ToM assessment and/or had no description about structure, validity or reliability of their tests. METHODological quality of the selected articles was assessed using the Critical Appraisal Skills Programme (CASP). In primary searching, we found 1237 articles in total databases. After removing duplicates and applying all inclusion and exclusion criteria, we selected 11 tests for this systematic review. There were a few valid, reliable and comprehensive ToM tests for normal preschool children. However, we had limitations concerning the included articles. The defined ToM tests were different in populations, tasks, mode of presentations, scoring, mode of responses, times and other variables. Also, they had various validities and reliabilities. Therefore, it is recommended that the researchers and clinicians select the ToM tests according to their psychometric characteristics, validity and reliability.

Validity and Reliability of Published Comprehensive Theory of Mind Tests for Normal Preschool Children: A Systematic Review

PubMed Central

Ziatabar Ahmadi, Seyyede Zohreh; Jalaie, Shohreh; Ashayeri, Hassan

2015-01-01

Objective: Theory of mind (ToM) or mindreading is an aspect of social cognition that evaluates mental states and beliefs of oneself and others. Validity and reliability are very important criteria when evaluating standard tests; and without them, these tests are not usable. The aim of this study was to systematically review the validity and reliability of published English comprehensive ToM tests developed for normal preschool children. Method: We searched MEDLINE (PubMed interface), Web of Science, Science direct, PsycINFO, and also evidence base Medicine (The Cochrane Library) databases from 1990 to June 2015. Search strategy was Latin transcription of ‘Theory of Mind’ AND test AND children. Also, we manually studied the reference lists of all final searched articles and carried out a search of their references. Inclusion criteria were as follows: Valid and reliable diagnostic ToM tests published from 1990 to June 2015 for normal preschool children; and exclusion criteria were as follows: the studies that only used ToM tests and single tasks (false belief tasks) for ToM assessment and/or had no description about structure, validity or reliability of their tests. Methodological quality of the selected articles was assessed using the Critical Appraisal Skills Programme (CASP). Result: In primary searching, we found 1237 articles in total databases. After removing duplicates and applying all inclusion and exclusion criteria, we selected 11 tests for this systematic review. Conclusion: There were a few valid, reliable and comprehensive ToM tests for normal preschool children. However, we had limitations concerning the included articles. The defined ToM tests were different in populations, tasks, mode of presentations, scoring, mode of responses, times and other variables. Also, they had various validities and reliabilities. Therefore, it is recommended that the researchers and clinicians select the ToM tests according to their psychometric characteristics, validity and reliability. PMID:27006666

Taurus II Stage Test Simulations: Using Large-Scale CFD Simulations to Provide Critical Insight into Plume Induced Environments During Design

NASA Technical Reports Server (NTRS)

Struzenberg, L. L.; West, J. S.

2011-01-01

This paper describes the use of targeted Loci/CHEM CFD simulations to evaluate the effects of a dual-engine first-stage hot-fire test on an evolving integrated launch pad/test article design. This effort was undertaken as a part of the NESC Independent Assessment of the Taurus II Stage Test Series. The underlying conceptual model included development of a series of computational models and simulations to analyze the plume induced environments on the pad, facility structures and test article. A pathfinder simulation was first developed, capable of providing quick-turn around evaluation of plume impingement pressures on the flame deflector. Results from this simulation were available in time to provide data for an ongoing structural assessment of the deflector. The resulting recommendation was available in a timely manner and was incorporated into construction schedule for the new launch stand under construction at Wallops Flight Facility. A series of Reynolds-Averaged Navier-Stokes (RANS) quasi-steady simulations representative of various key elements of the test profile was performed to identify potential concerns with the test configuration and test profile. As required, unsteady Hybrid-RANS/LES simulations were performed, to provide additional insight into critical aspects of the test sequence. Modifications to the test-specific hardware and facility structures thermal protection as well as modifications to the planned hot-fire test profile were implemented based on these simulation results.

Ending the use of animals in toxicity testing and risk evaluation.

PubMed

Rowan, Andrew N

2015-10-01

This article discusses the use of animals for the safety testing of chemicals, including pharmaceuticals, household products, pesticides, and industrial chemicals. It reviews changes in safety testing technology and what those changes mean from the perspective of industrial innovation, public policy and public health, economics, and ethics. It concludes that the continuing use of animals for chemical safety testing should end within the decade as cheaper, quicker, and more predictive technologies are developed and applied.

Vertical Drop Testing and Analysis of the WASP Helicopter Skid Gear

NASA Technical Reports Server (NTRS)

Fuchs, Yvonne T.; Jackson, Karen E.

2008-01-01

Human occupant modeling and injury risk assessment have been identified as areas of research for improved prediction of rotorcraft crashworthiness within the NASA Aeronautics Program's Subsonic Rotary Wing Project. As part of this effort, an experimental program was conducted to assess the impact performance of a skid gear for use on the WASP kit-built helicopter, which is marketed by HeloWerks, Inc. of Hampton, Virginia. Test data from a drop test at an impact velocity of 8.4 feet-per-second were used to assess a finite element model of the skid gear test article. This assessment included human occupant analytic models developed for execution in LS-DYNA. The test article consisted of an aluminum skid gear mounted beneath a steel plate. A seating platform was attached to the upper surface of the steel plate, and two 95th percentile Hybrid III male Aerospace Anthropomorphic Test Devices (ATDs) were seated on the platform and secured using a four-point restraint system. The goal of the test-analysis correlation is to further the understanding of LS-DYNA ATD occupant models and responses in the vertical (or spinal) direction. By correlating human occupant experimental test data for a purely vertical impact with the LS-DYNA occupant responses, improved confidence in the use of these tools and better understanding of the limitations of the automotive-based occupant models for aerospace application can begin to be developed.

Vertical Drop Testing and Analysis of the WASP Helicopter Skid Gear

NASA Technical Reports Server (NTRS)

Fuchs, Yvonne T.; Jackson, Karen E.

2008-01-01

Human occupant modeling and injury risk assessment have been identified as areas of research for improved prediction of rotorcraft crashworthiness within the NASA Aeronautics Program s Subsonic Rotary Wing Project. As part of this effort, an experimental program was conducted to assess the impact performance of a skid gear for use on the WASP kit-built helicopter, which is marketed by HeloWerks, Inc. of Hampton, Virginia. Test data from a drop test at an impact velocity of 8.4 feet-per-second were used to assess a finite element model of the skid gear test article. This assessment included human occupant analytic models developed for execution in LS-DYNA. The test article consisted of an aluminum skid gear mounted beneath a steel plate. A seating platform was attached to the upper surface of the steel plate, and two 95th percentile Hybrid III male Aerospace Anthropomorphic Test Devices (ATDs) were seated on the platform and secured using a four-point restraint system. The goal of the test-analysis correlation is to further the understanding of LS-DYNA ATD occupant models and responses in the vertical (or spinal) direction. By correlating human occupant experimental test data for a purely vertical impact with the LS-DYNA occupant responses, improved confidence in the use of these tools and better understanding of the limitations of the automotive-based occupant models for aerospace application can begin to be developed.

Summary of the development the US Environmental Protection Agency's Medaka Extended One Generation Reproduction Test (MEOGRT) using data from 9 multigenerational medaka tests.

PubMed

Flynn, Kevin; Lothenbach, Doug; Whiteman, Frank; Hammermeister, Dean; Touart, Leslie W; Swintek, Joe; Tatarazako, Norihisa; Onishi, Yuta; Iguchi, Taisen; Johnson, Rodney

2017-12-01

In response to various legislative mandates, the US Environmental Protection Agency (USEPA) formed its Endocrine Disruptor Screening Program (EDSP), which in turn, formed the basis of a tiered testing strategy to determine the potential of pesticides, commercial chemicals, and environmental contaminants to disrupt the endocrine system. The first tier of tests is intended to detect the potential for endocrine disruption mediated through estrogen, androgen, or thyroid pathways, whereas the second tier is intended to further characterize the effects on these pathways and to establish a dose-response relationship for adverse effects. One of these tier 2 tests, the Medaka Extended One Generation Reproduction Test (MEOGRT), was developed by the USEPA for the EDSP and, in collaboration with the Japanese Ministry of the Environment, for the Guidelines for the Testing of Chemicals of the Organisation for Economic Co-operation and Development (OECD). The MEOGRT protocol was iteratively modified based on knowledge gained after the successful completion of 9 tests with variations in test protocols. The present study describes both the final MEOGRT protocol that has been published by the USEPA and the OECD, and the iterations that provided valuable insights into nuances of the protocol. The various tests include exposure to 17β-estradiol, 4-t-octylphenol, o,p'- dichlorodiphenyltrichloroethane, 4-chloro-3-methylphenol, tamoxifen, 17β-trenbolone, vinclozolin, and prochloraz. Environ Toxicol Chem 2017;36:3387-3403. Published 2017 Wiley Periodicals Inc. on behalf of SETAC. This article is a US government work and, as such, is in the public domain in the United States of America. Published 2017 Wiley Periodicals Inc. on behalf of SETAC. This article is a US government work and, as such, is in the public domain in the United States of America.

Acoustical Testing Laboratory Developed to Support the Low-Noise Design of Microgravity Space Flight Hardware

NASA Technical Reports Server (NTRS)

Cooper, Beth A.

2001-01-01

The NASA John H. Glenn Research Center at Lewis Field has designed and constructed an Acoustical Testing Laboratory to support the low-noise design of microgravity space flight hardware. This new laboratory will provide acoustic emissions testing and noise control services for a variety of customers, particularly for microgravity space flight hardware that must meet International Space Station limits on noise emissions. These limits have been imposed by the space station to support hearing conservation, speech communication, and safety goals as well as to prevent noise-induced vibrations that could impact microgravity research data. The Acoustical Testing Laboratory consists of a 23 by 27 by 20 ft (height) convertible hemi/anechoic chamber and separate sound-attenuating test support enclosure. Absorptive 34-in. fiberglass wedges in the test chamber provide an anechoic environment down to 100 Hz. A spring-isolated floor system affords vibration isolation above 3 Hz. These criteria, along with very low design background levels, will enable the acquisition of accurate and repeatable acoustical measurements on test articles, up to a full space station rack in size, that produce very little noise. Removable floor wedges will allow the test chamber to operate in either a hemi/anechoic or anechoic configuration, depending on the size of the test article and the specific test being conducted. The test support enclosure functions as a control room during normal operations but, alternatively, may be used as a noise-control enclosure for test articles that require the operation of noise-generating test support equipment.

Design, Analysis and Testing of a PRSEUS Pressure Cube to Investigate Assembly Joints

NASA Technical Reports Server (NTRS)

Yovanof, Nicolette; Lovejoy, Andrew E.; Baraja, Jaime; Gould, Kevin

2012-01-01

Due to its potential to significantly increase fuel efficiency, the current focus of NASA's Environmentally Responsible Aviation Program is the hybrid wing body (HWB) aircraft. Due to the complex load condition that exists in HWB structure, as compared to traditional aircraft configurations, light-weight, cost-effective and manufacturable structural concepts are required to enable the HWB. The Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept is one such structural concept. A building block approach for technology development of the PRSEUS concept is being conducted. As part of this approach, a PRSEUS pressure cube was developed as a risk reduction test article to examine a new integral cap joint concept. This paper describes the design, analysis and testing of the PRSEUS pressure cube test article. The pressure cube was required to withstand a 2P, 18.4 psi, overpressure load requirement. The pristine pressure cube was tested to 2.2P with no catastrophic failure. After the addition of barely visible impact damage, the cube was pressure loaded to 48 psi where catastrophic failure occurred, meeting the scale-up requirement. Comparison of pretest and posttest analyses with the cube test response agree well, and indicate that current analysis methods can be used to accurately analyze PRSEUS structure for initial failure response.

Force Limited Random Vibration Test of TESS Camera Mass Model

NASA Technical Reports Server (NTRS)

Karlicek, Alexandra; Hwang, James Ho-Jin; Rey, Justin J.

2015-01-01

The Transiting Exoplanet Survey Satellite (TESS) is a spaceborne instrument consisting of four wide field-of-view-CCD cameras dedicated to the discovery of exoplanets around the brightest stars. As part of the environmental testing campaign, force limiting was used to simulate a realistic random vibration launch environment. While the force limit vibration test method is a standard approach used at multiple institutions including Jet Propulsion Laboratory (JPL), NASA Goddard Space Flight Center (GSFC), European Space Research and Technology Center (ESTEC), and Japan Aerospace Exploration Agency (JAXA), it is still difficult to find an actual implementation process in the literature. This paper describes the step-by-step process on how the force limit method was developed and applied on the TESS camera mass model. The process description includes the design of special fixtures to mount the test article for properly installing force transducers, development of the force spectral density using the semi-empirical method, estimation of the fuzzy factor (C2) based on the mass ratio between the supporting structure and the test article, subsequent validating of the C2 factor during the vibration test, and calculation of the C.G. accelerations using the Root Mean Square (RMS) reaction force in the spectral domain and the peak reaction force in the time domain.

Testing and Analysis of a Composite Non-Cylindrical Aircraft Fuselage Structure . Part II; Severe Damage

NASA Technical Reports Server (NTRS)

Przekop, Adam; Jegley, Dawn C.; Lovejoy, Andrew E.; Rouse, Marshall; Wu, Hsi-Yung T.

2016-01-01

The Environmentally Responsible Aviation Project aimed to develop aircraft technologies enabling significant fuel burn and community noise reductions. Small incremental changes to the conventional metallic alloy-based 'tube and wing' configuration were not sufficient to achieve the desired metrics. One airframe concept identified by the project as having the potential to dramatically improve aircraft performance was a composite-based hybrid wing body configuration. Such a concept, however, presented inherent challenges stemming from, among other factors, the necessity to transfer wing loads through the entire center fuselage section which accommodates a pressurized cabin confined by flat or nearly flat panels. This paper discusses a finite element analysis and the testing of a large-scale hybrid wing body center section structure developed and constructed to demonstrate that the Pultruded Rod Stitched Efficient Unitized Structure concept can meet these challenging demands of the next generation airframes. Part II of the paper considers the final test to failure of the test article in the presence of an intentionally inflicted severe discrete source damage under the wing up-bending loading condition. Finite element analysis results are compared with measurements acquired during the test and demonstrate that the hybrid wing body test article was able to redistribute and support the required design loads in a severely damaged condition.

Sorbent, Sublimation, and Icing Modeling Methods: Experimental Validation and Application to an Integrated MTSA Subassembly Thermal Model

NASA Technical Reports Server (NTRS)

Bower, Chad; Padilla, Sebastian; Iacomini, Christie; Paul, Heather L.

2010-01-01

This paper details the validation of modeling methods for the three core components of a Metabolic heat regenerated Temperature Swing Adsorption (MTSA) subassembly, developed for use in a Portable Life Support System (PLSS). The first core component in the subassembly is a sorbent bed, used to capture and reject metabolically produced carbon dioxide (CO2). The sorbent bed performance can be augmented with a temperature swing driven by a liquid CO2 (LCO2) sublimation heat exchanger (SHX) for cooling the sorbent bed, and a condensing, icing heat exchanger (CIHX) for warming the sorbent bed. As part of the overall MTSA effort, scaled design validation test articles for each of these three components have been independently tested in laboratory conditions. Previously described modeling methodologies developed for implementation in Thermal Desktop and SINDA/FLUINT are reviewed and updated, their application in test article models outlined, and the results of those model correlations relayed. Assessment of the applicability of each modeling methodology to the challenge of simulating the response of the test articles and their extensibility to a full scale integrated subassembly model is given. The independent verified and validated modeling methods are applied to the development of a MTSA subassembly prototype model and predictions of the subassembly performance are given. These models and modeling methodologies capture simulation of several challenging and novel physical phenomena in the Thermal Desktop and SINDA/FLUINT software suite. Novel methodologies include CO2 adsorption front tracking and associated thermal response in the sorbent bed, heat transfer associated with sublimation of entrained solid CO2 in the SHX, and water mass transfer in the form of ice as low as 210 K in the CIHX.

Interactive Multimedia Instruction versus Traditional Training Programmes: Analysis of Their Effectiveness and Perception

ERIC Educational Resources Information Center

Shanthy, T. Rajula; Thiagarajan, R.

2011-01-01

In this article, the practicability of introduction of computer multimedia as an educational tool was compared with the traditional approach for training sugarcane growers in ratoon management practices in three villages of Tamil Nadu state, India using pre-test, post-test control group experimental design. A CD-ROM was developed as a multimedia…

Reliability of Total Test Scores When Considered as Ordinal Measurements

ERIC Educational Resources Information Center

Biswas, Ajoy Kumar

2006-01-01

This article studies the ordinal reliability of (total) test scores. This study is based on a classical-type linear model of observed score (X), true score (T), and random error (E). Based on the idea of Kendall's tau-a coefficient, a measure of ordinal reliability for small-examinee populations is developed. This measure is extended to large…

Black/White Differences in Adolescent Drug Use: A Test of Six Hypotheses

ERIC Educational Resources Information Center

Rote, Sunshine M.; Taylor, John

2014-01-01

Six specific hypotheses have been developed to account for why Caucasians have higher rates of drug use compared to African-Americans. This article utilizes data from a South Florida-based community study of 893 young adults (1998-2002) to test these hypotheses. Specifically, Caucasians (1) initiate drug use at younger ages than African-Americans…

Turbine Engine Research Center (TERC) Data System Enhancement and Test Article Evaluation. Delivery Order 0002: TERC Aeromechanical Characterization

DTIC Science & Technology

2005-06-01

test, the entire turbulence model was changed from standard k- epsilon to Spalart- Allmaras. Using these different tools of turbulence models, a few...this research, leaving only pre-existing finite element models to be used. At some point a NASTRAN model was developed for vibrations analysis but

Developing a Validity Argument through Abductive Reasoning with an Empirical Demonstration of the Latent Class Analysis

ERIC Educational Resources Information Center

Wu, Amery D.; Stone, Jake E.; Liu, Yan

2016-01-01

This article proposes and demonstrates a methodology for test score validation through abductive reasoning. It describes how abductive reasoning can be utilized in support of the claims made about test score validity. This methodology is demonstrated with a real data example of the Canadian English Language Proficiency Index Program…

Eyes on the Prize: A Struggling Wisconsin School Forges a Steady Path toward Academic Achievement

ERIC Educational Resources Information Center

Antonovich, Jane; Jones, Kelly; Hoffman, Deborah

2012-01-01

Some schools make significant contributions to a child's growth and development with little to show on a standardized test, while other schools do little, with acceptable results on those same tests. This article describes how Lincoln Elementary School in Madison, Wisconsin, made creative use of resources to promote student achievement and meet…

Testing Students with Special Needs: A Model for Understanding the Interaction between Assessment and Student Characteristics in a Universally Designed Environment

ERIC Educational Resources Information Center

Ketterlin-Geller, Leanne R.

2008-01-01

This article presents a model of assessment development integrating student characteristics with the conceptualization, design, and implementation of standardized achievement tests. The model extends the assessment triangle proposed by the National Research Council (Pellegrino, Chudowsky, & Glaser, 2001) to consider the needs of students with…

The experience of using the personal electrocardiograph “ECG-Express”

NASA Astrophysics Data System (ADS)

Lezhnina, I. A.; Overchuk, K. V.; Uvarov, A. A.; Perchatkin, V. A.; Lvova, A. B.

2017-08-01

The article describes the results of testing ECG-Express devices, previously developed at the Tomsk Polytechnic University. The testing was carried out on the basis of Tomsk Scientific Research Institute of Cardiology. Here we show the argumentation for application of such a devices in medical practice as well as number of cases of successful use.

What Are Error Rates for Classifying Teacher and School Performance Using Value-Added Models?

ERIC Educational Resources Information Center

Schochet, Peter Z.; Chiang, Hanley S.

2013-01-01

This article addresses likely error rates for measuring teacher and school performance in the upper elementary grades using value-added models applied to student test score gain data. Using a realistic performance measurement system scheme based on hypothesis testing, the authors develop error rate formulas based on ordinary least squares and…

Teacher Evaluation as Trojan Horse: The Case for Teacher-Developed Assessments

ERIC Educational Resources Information Center

Briggs, Derek C.

2013-01-01

In his focus article "How Is Testing Supposed to Improve Schooling?" Ed Haertel distinguishes between seven uses of educational tests as a function of the intended action and what or who will be influenced by the intended action. He then applies Mike Kane's interpretive argument approach (Kane, 2006) as a basis for speculating about the validity…

Breast Cyst Aspiration

MedlinePlus

... TestingRead Article >>Plasma Viral Load TestingInsulin TherapyRead Article >>Insulin Therapy Visit our interactive symptom checker Visit our interactive symptom checker Get Started Related ArticlesPlasma Viral Load TestingRead ... TherapyRead Article >>Drugs, Procedures & DevicesInsulin TherapyThe goal of ...

The Assay Guidance Manual: Quantitative Biology and Pharmacology in Preclinical Drug Discovery.

PubMed

Coussens, Nathan P; Sittampalam, G Sitta; Guha, Rajarshi; Brimacombe, Kyle; Grossman, Abigail; Chung, Thomas D Y; Weidner, Jeffrey R; Riss, Terry; Trask, O Joseph; Auld, Douglas; Dahlin, Jayme L; Devanaryan, Viswanath; Foley, Timothy L; McGee, James; Kahl, Steven D; Kales, Stephen C; Arkin, Michelle; Baell, Jonathan; Bejcek, Bruce; Gal-Edd, Neely; Glicksman, Marcie; Haas, Joseph V; Iversen, Philip W; Hoeppner, Marilu; Lathrop, Stacy; Sayers, Eric; Liu, Hanguan; Trawick, Bart; McVey, Julie; Lemmon, Vance P; Li, Zhuyin; McManus, Owen; Minor, Lisa; Napper, Andrew; Wildey, Mary Jo; Pacifici, Robert; Chin, William W; Xia, Menghang; Xu, Xin; Lal-Nag, Madhu; Hall, Matthew D; Michael, Sam; Inglese, James; Simeonov, Anton; Austin, Christopher P

2018-06-07

The Assay Guidance Manual (AGM) is an eBook of best-practices for the design, development, and implementation of robust assays for early drug discovery. Initiated by pharmaceutical company scientists, the manual provides guidance for designing a "testing funnel" of assays to identify genuine hits using high-throughput screening (HTS) and advancing them through pre-clinical development. Combined with a workshop/tutorial component, the overall goal of the AGM is to provide a valuable resource for training translational scientists. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Vaginal rings for delivery of HIV microbicides

PubMed Central

Malcolm, R Karl; Fetherston, Susan M; McCoy, Clare F; Boyd, Peter; Major, Ian

2012-01-01

Following the successful development of long-acting steroid-releasing vaginal ring devices for the treatment of menopausal symptoms and contraception, there is now considerable interest in applying similar devices to the controlled release of microbicides against HIV. In this review article, the vaginal ring concept is first considered within the wider context of the early advances in controlled-release technology, before describing the various types of ring device available today. The remainder of the article highlights the key developments in HIV microbicide-releasing vaginal rings, with a particular focus on the dapivirine ring that is presently in late-stage clinical testing. PMID:23204872

Vaginal rings for delivery of HIV microbicides.

PubMed

Malcolm, R Karl; Fetherston, Susan M; McCoy, Clare F; Boyd, Peter; Major, Ian

2012-01-01

Following the successful development of long-acting steroid-releasing vaginal ring devices for the treatment of menopausal symptoms and contraception, there is now considerable interest in applying similar devices to the controlled release of microbicides against HIV. In this review article, the vaginal ring concept is first considered within the wider context of the early advances in controlled-release technology, before describing the various types of ring device available today. The remainder of the article highlights the key developments in HIV microbicide-releasing vaginal rings, with a particular focus on the dapivirine ring that is presently in late-stage clinical testing.

21 CFR 58.113 - Mixtures of articles with carriers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Mixtures of articles with carriers. 58.113 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.113 Mixtures of articles with carriers. (a) For each test or control article that is mixed with a carrier, tests...

21 CFR 58.113 - Mixtures of articles with carriers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Mixtures of articles with carriers. 58.113 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.113 Mixtures of articles with carriers. (a) For each test or control article that is mixed with a carrier, tests...

21 CFR 58.113 - Mixtures of articles with carriers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Mixtures of articles with carriers. 58.113 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.113 Mixtures of articles with carriers. (a) For each test or control article that is mixed with a carrier, tests...

21 CFR 58.113 - Mixtures of articles with carriers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Mixtures of articles with carriers. 58.113 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.113 Mixtures of articles with carriers. (a) For each test or control article that is mixed with a carrier, tests...

21 CFR 58.113 - Mixtures of articles with carriers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Mixtures of articles with carriers. 58.113 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.113 Mixtures of articles with carriers. (a) For each test or control article that is mixed with a carrier, tests...

Flowfield Analysis of a Small Entry Probe (SPRITE) Tested in an Arc Jet

NASA Technical Reports Server (NTRS)

Prabhu, Dinesh K.

2012-01-01

A novel concept of small size (diameter less than 15 inches) entry probes named SPRITE (Small Probe Re-entry Investigation for TPS Engineering) has been developed at NASA Ames Research Center (ARC). These flight probes have on-board data acquisition systems that have also been developed in parallel at NASA ARC by Greg Swanson1. Flight probes of this size facilitate testing over a wide range of conditions in arc jets available at NASA ARC, thereby fulfilling a 'test what you fly' paradigm. As indicated by the acronym, these probes, with suitably tailored trajectories, are primarily meant to be robotic flight test beds for TPS materials, although the design is flexible enough to accommodate additional objectives of flight-testing other vehicle subsystems. A first step towards establishing the feasibility of the SPRITE concept is to arc-jet test fully instrumented models at flight scale. In a follow-on to the Large-Scale Article Tests (LSAT2) performed in the 60 MW Interaction Heating Facility (IHF) in late 2008/early 2009, a full-scale model of Deep Space-2 (DS23) made of red oak was tested in the 20 MW Aerodynamic Heating Facility (AHF). There were no issues with mass capture by the diffuser for blunt bodies of roughly 15 inches diameter tested in the 18-inch nozzle of the AHF. Building on this initial success, two identical test articles - SPRITE-T1-1 and SPRITE-T1-2 (T1 indicating the choice of back shell geometry) - were fabricated, and one of them, SPRITE-T1-1, was tested in the AHF recently. Both these test articles, 14 inches in diameter, have a 45deg sphere-cone (like DS2) made of PICA bonded on to a 1/8th inch thick aluminum shell using RTV. The aft portion of the test article is a conical frustum (15deg cone angle) with LI-2200 bonded on to the aluminum shell. Each model is fully instrumented with: (a) thermocouples imbedded in plugs in the heat shield, (b) thermocouples bonded to the aluminum substructure; the thermocouples are distributed over the entire shell, and (c) a few strain gages. Data from some of the thermocouples and gages are acquired by the on-board data acquisition system (DAS), while data from the others are routed to the facility-provided DAS, thereby enabling a cross check on the in situ measurement capability. as inputs to v2.6.1 of the in-house materials thermal response code, FIAT

Structural Testing of a 6m Hypersonic Inflatable Aerodynamic Decelerator System

NASA Technical Reports Server (NTRS)

Swanson, G. T.; Kazemba, C. D.; Johnson, R. K.; Hughes, S. J.; Calomino, A. M.

2015-01-01

NASA is developing low ballistic coefficient technologies to support the Nations long-term goal of landing humans on Mars. Current entry, decent, and landing technologies are not practical for this class of payloads due to geometric constraints dictated by current and future launch vehicle fairing limitations. Hypersonic Inflatable Aerodynamic Decelerators (HIADs) are being developed to circumvent this limitation and are now considered a leading technology to enable landing of heavy payloads on Mars. At the beginning of 2014, a 6m diameter HIAD inflatable structure with an integrated flexible thermal protection system (TPS) was subjected to a static load test series to verify its structural performance under flight-relevant loads. The inflatable structure was constructed into a 60 degree sphere-cone configuration using nine inflatable torus segments composed of fiber-reinforced thin films. The inflatable tori were joined together using adhesives and high-strength textile woven structural straps. These straps help distribute the load throughout the inflatable structure. The 6m flexible TPS was constructed using multiple layers of high performance materials that are designed to protect the inflatable structure from heat loads that would be seen in flight during atmospheric entry. A custom test fixture was constructed to perform the static load test series. The fixture consisted of a round structural tub with enough height and width to allow for displacement of the HIAD test article as loads were applied. The bottom of the tub rim had an airtight seal with the floor. The rigid centerbody of the HIAD was mounted to a pedestal in the center of the structural tub. Using an impermeable membrane draped over the HIAD test article, an airtight seal was created with the top rim of the static load tub. This seal allowed partial vacuum to be pulled beneath the HIAD resulting in a uniform static pressure load applied to the outer surface. Using this technique, the test article was subjected to loads of up to 50,000lbs. During the test series an extensive amount of instrumentation was used to provide a rich data set, including deflected shape, structural strap loads, torus cord loads, inflation pressures, and applied static load. In this paper the 2014 6m HIAD static load test series will be discussed in detail, including the design of the 6m HIAD test article, the test setup, and test execution. Analysis results will be described supporting the conclusions that were drawn from the test series..

Implementing secure laptop-based testing in an undergraduate nursing program: a case study.

PubMed

Tao, Jinyuan; Lorentz, B Chris; Hawes, Stacey; Rugless, Fely; Preston, Janice

2012-07-01

This article presents the implementation of secure laptop-based testing in an undergraduate nursing program. Details on how to design, develop, implement, and secure tests are discussed. Laptop-based testing mode is also compared with the computer-laboratory-based testing model. Five elements of the laptop-based testing model are illustrated: (1) it simulates the national board examination, (2) security is achievable, (3) it is convenient for both instructors and students, (4) it provides students hands-on practice, (5) continuous technical support is the key.

Results of a First Generation Propellant Energy Source Module Testing: Non-Nuclear Testing of Fission System

NASA Technical Reports Server (NTRS)

VanDyke, Melissa; Godfroy, Tom; Houts, Mike; Dickens, Ricky; Dobson, Chris; Pederson, Kevin; Reid, Bob

1999-01-01

The use of resistance heaters to simulate heat from fission allows extensive development of fission systems to be performed in non-nuclear test facilities, saving time and money. Resistance heated tests on the Module Unfueled Thermal- hydraulic Test (MUTT) article has been performed at the Marshall Space Flight Center. This paper discusses the results of these experiments to date, and describes the additional testing that will be performed. Recommendations related to the design of testable space fission power and propulsion systems are made.

Results of a first generation least expensive approach to fission module tests: Non-nuclear testing of a fission system

NASA Astrophysics Data System (ADS)

van Dyke, Melissa; Godfroy, Tom; Houts, Mike; Dickens, Ricky; Dobson, Chris; Pederson, Kevin; Reid, Bob; Sena, J. Tom

2000-01-01

The use of resistance heaters to simulate heat from fission allows extensive development of fission systems to be performed in non-nuclear test facilities, saving time and money. Resistance heated tests on the Module Unfueled Thermal-hydraulic Test (MUTT) article has been performed at the Marshall Space Flight Center. This paper discusses the results of these experiments to date, and describes the additional testing that will be performed. Recommendations related to the design of testable space fission power and propulsion systems are made. .

1200008

NASA Image and Video Library

2012-01-18

EXTERNAL TANK TEST ARTICLE (ETTA2) IS IN TRANSIT TO BE ROTATED 180° FOR INTERFACE RING INSTALLATION FOR SBKF (SHELL BUCKLING KNOCKDOWN FACTOR) CRITICAL FEEDBACK, UNDERSTANDING AND IDEAS THAT WILL ENABLE THE DEVELOPMENT AND IMPLEMENTATION OF NEW DESIGN APPROACHES AND TECHNOLOGY .

PID techniques: Alternatives to RICH methods

DOE PAGES

Va’vra, J.

2017-07-05

Here, in this review article we discuss new updates on PID techniques, other than the Cherenkov method. In particular, we discuss recent efforts to develop high resolution timing, placing an emphasis on small scale test results.

TESTING OF A 20-METER SOLAR SAIL SYSTEM

NASA Technical Reports Server (NTRS)

Gaspar, J. L.; Behun, V.; Mann, T.; Murphy D.; Macy, B.

2005-01-01

This paper describes the structural dynamic tests conducted in-vacuum on the Scalable Square Solar Sail (S(sup 4)) System 20-meter test article developed by ATK Space Systems as part of a ground demonstrator system development program funded by NASA's In-Space Propulsion program1-3. These tests were conducted for the purpose of validating analytical models that would be required by a flight test program to predict in space performance4. Specific tests included modal vibration tests on the solar sail system in a 1 Torr vacuum environment using various excitation locations and techniques including magnetic excitation at the sail quadrant corners, piezoelectric stack actuation at the mast roots, spreader bar excitation at the mast tips, and bi-morph piezoelectric patch actuation on the sail cords. The excitation methods were evaluated for their suitability to in-vacuum ground testing and their traceability to the development of on-orbit flight test techniques. The solar sail masts were also tested in ambient atmospheric conditions and these results are also discussed.

TESTING OF A 20-METER SOLAR SAIL SYSTEM

NASA Technical Reports Server (NTRS)

Gaspar, Jim L.; Behun, Vaughan; Mann, Troy; Murphy, Dave; Macy, Brian

2005-01-01

This paper describes the structural dynamic tests conducted in-vacuum on the Scalable Square Solar Sail (S(sup 4)) System 20-meter test article developed by ATK Space Systems as part of a ground demonstrator system development program funded by NASA's In-Space Propulsion program. These tests were conducted for the purpose of validating analytical models that would be required by a flight test program to predict in space performance. Specific tests included modal vibration tests on the solar sail system in a 1 Torr vacuum environment using various excitation locations and techniques including magnetic excitation at the sail quadrant corners, piezoelectric stack actuation at the mast roots, spreader bar excitation at the mast tips, and bi-morph piezoelectric patch actuation on the sail cords. The excitation methods are evaluated for their suitability to in-vacuum ground testing and their traceability to the development of on-orbit flight test techniques. The solar sail masts were also tested in ambient atmospheric conditions and these results are also discussed.

Should direct-to-consumer personalized genomic medicine remain unregulated?: a rebuttal of the defenses.

PubMed

Valles, Sean A

2012-01-01

Direct-to-consumer personalized genomic medicine has recently grown into a small industry that sells mail-order DNA sample kits and then provides disease risk assessments, typically based upon results from genome-trait association studies. The companies selling these services have been largely exempted from FDA regulation in the United States. Testing kit companies and their supporters have defended the industry's unregulated status using two arguments. First, defenders have argued that mere absence of harm is all that must be proved for mail-order tests to be acceptable. Second, defenders of mail-order testing have argued that there is an individual right to the tests' information. This article rebuts these arguments. The article demonstrates that the direct-to-consumer market has resulted in the sidelining of clinical utility (medical value to patients), leading to the development of certain mail-order tests that do not promote customers' interests and to defenders' downplaying of a potentially damaging empirical study of mail-order genomic testing's effects on consumers. The article also shows that the notion of an individual right to these tests rests on a flawed reading of the key service provided by mail-order companies, which is the provision of medical interpretations, not simply genetic information. Absent these two justifications, there is no reason to exempt direct-to-consumer personalized genomic medicine from stringent federal oversight.

Global Dental Research Productivity and Its Association With Human Development, Gross National Income, and Political Stability.

PubMed

Allareddy, Veerasathpurush; Allareddy, Veeratrishul; Rampa, Sankeerth; Nalliah, Romesh P; Elangovan, Satheesh

2015-09-01

The objective of this study is to examine the associations between country level factors (such as human development, economic productivity, and political stability) and their dental research productivity. This study is a cross-sectional analysis of bibliometric data from Scopus search engine. Human Development Index (HDI), Gross National Income per capita (GNI), and Failed State Index measures were the independent variables. Outcomes were "Total number of publications (articles or articles in press) in the field of dentistry" and "Total number of publications in the field of dentistry per million population." Non-parametric tests were used to examine the association between the independent and outcome variables. During the year 2013, a total of 11,952 dental research articles were published across the world. The top 5 publishing countries were United States, Brazil, India, Japan, and United Kingdom. "Very High" HDI countries had significantly higher number of total dental research articles and dental research articles per million population when compared to the "High HDI," "Medium HDI," and "Low HDI" countries (p < 0.0001). There was a significant linear relationship between the GNI quartile income levels and outcome metrics (p ≤ 0.007). Countries which were highly politically stable were associated with significantly higher dental research productivity (p < 0.0001). There appears to be a regional concentration of articles with just five countries contributing to over 50% of all articles. The human development and economic development of a country are linearly correlated with dental research productivity. Dental research productivity also increases with increasing political stability of a country. Copyright © 2015 Elsevier Inc. All rights reserved.

Joint and Soft Tissue Injections

MedlinePlus

... TestingRead Article >>Plasma Viral Load TestingInsulin TherapyRead Article >>Insulin Therapy Visit our interactive symptom checker Visit our interactive symptom checker Get Started Related ArticlesPlasma Viral Load TestingRead ... TherapyRead Article >>Drugs, Procedures & DevicesInsulin TherapyThe goal of ...

Program Development from Start-to-Finish: A Case Study of the Healthy Relationship and Marriage Education Training Project

ERIC Educational Resources Information Center

Futris, Ted G.; Schramm, David G.

2015-01-01

What goes into designing and implementing a successful program? How do both research and practice inform program development? In this article, the process through which a federally funded training curriculum was developed and piloted tested is described. Using a logic model framework, important lessons learned are shared in defining the situation,…

Testing for nonlinear dependence in financial markets.

PubMed

Dore, Mohammed; Matilla-Garcia, Mariano; Marin, Manuel Ruiz

2011-07-01

This article addresses the question of improving the detection of nonlinear dependence by means of recently developed nonparametric tests. To this end a generalized version of BDS test and a new test based on symbolic dynamics are used on realizations from a well-known artificial market for which the dynamic equation governing the market is known. Comparisons with other tests for detecting nonlinearity are also provided. We show that the test based on symbolic dynamics outperforms other tests with the advantage that it depends only on one free parameter, namely the embedding dimension. This does not hold for other tests for nonlinearity.

Technical details in the structural development of Rohrbach seaplanes

NASA Technical Reports Server (NTRS)

Mathias, Gotthold; Holzapfel, Adolf

1929-01-01

The recent trial flights and acceptance tests of the Rohrbach "Romar," the largest seaplane in the world, have yielded results fully confirming the principles followed in its development. Its take-off weight of 19,000 kg, its beating the world record for raising the greatest useful load to 2000 m by almost 2500 kg and its remarkable showing in the seaworthiness tests are the results of intelligent researches, the guiding principles of which are briefly set forth in this article.

Defining, illustrating and reflecting on logic analysis with an example from a professional development program.

PubMed

Tremblay, Marie-Claude; Brousselle, Astrid; Richard, Lucie; Beaudet, Nicole

2013-10-01

Program designers and evaluators should make a point of testing the validity of a program's intervention theory before investing either in implementation or in any type of evaluation. In this context, logic analysis can be a particularly useful option, since it can be used to test the plausibility of a program's intervention theory using scientific knowledge. Professional development in public health is one field among several that would truly benefit from logic analysis, as it appears to be generally lacking in theorization and evaluation. This article presents the application of this analysis method to an innovative public health professional development program, the Health Promotion Laboratory. More specifically, this paper aims to (1) define the logic analysis approach and differentiate it from similar evaluative methods; (2) illustrate the application of this method by a concrete example (logic analysis of a professional development program); and (3) reflect on the requirements of each phase of logic analysis, as well as on the advantages and disadvantages of such an evaluation method. Using logic analysis to evaluate the Health Promotion Laboratory showed that, generally speaking, the program's intervention theory appeared to have been well designed. By testing and critically discussing logic analysis, this article also contributes to further improving and clarifying the method. Copyright © 2013 Elsevier Ltd. All rights reserved.

21 CFR 58.47 - Facilities for handling test and control articles.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Facilities for handling test and control articles... for handling test and control articles. (a) As necessary to prevent contamination or mixups, there shall be separate areas for: (1) Receipt and storage of the test and control articles. (2) Mixing of the...

21 CFR 58.47 - Facilities for handling test and control articles.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Facilities for handling test and control articles... for handling test and control articles. (a) As necessary to prevent contamination or mixups, there shall be separate areas for: (1) Receipt and storage of the test and control articles. (2) Mixing of the...

21 CFR 58.47 - Facilities for handling test and control articles.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Facilities for handling test and control articles... for handling test and control articles. (a) As necessary to prevent contamination or mixups, there shall be separate areas for: (1) Receipt and storage of the test and control articles. (2) Mixing of the...

21 CFR 58.47 - Facilities for handling test and control articles.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Facilities for handling test and control articles... for handling test and control articles. (a) As necessary to prevent contamination or mixups, there shall be separate areas for: (1) Receipt and storage of the test and control articles. (2) Mixing of the...

Determination of rolling resistance coefficient based on normal tyre stiffness

NASA Astrophysics Data System (ADS)

Rykov, S. P.; Tarasuyk, V. N.; Koval, V. S.; Ovchinnikova, N. I.; Fedotov, A. I.; Fedotov, K. V.

2018-03-01

The purpose of the article is to develop analytical dependence of wheel rolling resistance coefficient based on the mathematical description of normal tyre stiffness. The article uses the methods of non-holonomic mechanics and plane section methods. The article shows that the abscissa of gravity center of tyre stiffness expansion by the length of the contact area is the shift of normal road response. It can be used for determining rolling resistance coefficient. When determining rolling resistance coefficient using ellipsis and power function equations, one can reduce labor costs for testing and increase assessment accuracy.

Molecular Solutions to Low Vision Resulting from Battlefield Injuries

DTIC Science & Technology

2006-05-01

promote optic nerve regeneration; (5) dry eye bydetermining how to minimize dry eye after LASIK refractive surgery by developing new tests to predict...Nerve Loss in LASIK Surgery, Invest. Ophthalmol. Vis. Sci. 2006 47: E-Abstract 4600. CONCLUSIONS We conclude that in the normal mouse conjunctiva, the...Mimicking Nerve Loss in LASIK Surgery, Invest. Ophthalmol. Vis. Sci. 2006 47: E-Abstract 4600. Services Email this article to a friend Similar articles in

The role of empathy in responses to persuasive risk communication: overcoming resistance to HIV prevention messages.

PubMed

Campbell, Rose G; Babrow, Austin S

2004-01-01

This article offers a theoretical analysis of the role of empathy as a key mediator of the suasive effects of health messages, and it discusses the testing of an empirical tool for studying the state of empathy in responses to persuasive messages. It is argued that felt empathy evokes cognitive and emotional processing conducive to important health-promoting responses. This assertion was tested by operationalizing empathy as a response state via a new measure, the Empathy Response Scale (ERS). Two pilot tests and one major study, all set in the challenging area of HIV/AIDS prevention, provided preliminary data supporting the theoretical analysis and the ERS as a measure of the state of empathy. The article concludes with discussions of directions for future tests of the empathy theory and scale, as well as applications of the current framework for developing persuasive messages.

Optical methods for non-contact measurements of membranes

NASA Astrophysics Data System (ADS)

Roose, S.; Stockman, Y.; Rochus, P.; Kuhn, T.; Lang, M.; Baier, H.; Langlois, S.; Casarosa, G.

2009-11-01

Structures for space applications very often suffer stringent mass constraints. Lightweight structures are developed for this purpose, through the use of deployable and/or inflatable beams, and thin-film membranes. Their inherent properties (low mass and small thickness) preclude the use of conventional measurement methods (accelerometers and displacement transducers for example) during on-ground testing. In this context, innovative non-contact measurement methods need to be investigated for these stretched membranes. The object of the present project is to review existing measurement systems capable of measuring characteristics of membrane space-structures such as: dot-projection videogrammetry (static measurements), stereo-correlation (dynamic and static measurements), fringe projection (wrinkles) and 3D laser scanning vibrometry (dynamic measurements). Therefore, minimum requirements were given for the study in order to have representative test articles covering a wide range of applications. We present test results obtained with the different methods on our test articles.

Epilogue: Reading Comprehension Is Not a Single Ability-Implications for Assessment and Instruction.

PubMed

Kamhi, Alan G; Catts, Hugh W

2017-04-20

In this epilogue, we review the 4 response articles and highlight the implications of a multidimensional view of reading for the assessment and instruction of reading comprehension. We reiterate the problems with standardized tests of reading comprehension and discuss the advantages and disadvantages of recently developed authentic tests of reading comprehension. In the "Instruction" section, we review the benefits and limitations of strategy instruction and highlight suggestions from the response articles to improve content and language knowledge. We argue that the only compelling reason to administer a standardized test of reading comprehension is when these tests are necessary to qualify students for special education services. Instruction should be focused on content knowledge, language knowledge, and specific task and learning requirements. This instruction may entail the use of comprehension strategies, particularly those that are specific to the task and focus on integrating new knowledge with prior knowledge.

Developing Fair Tests for Mathematics Curriculum Comparison Studies: The Role of Content Analyses

ERIC Educational Resources Information Center

Chavez, Oscar; Papick, Ira; Ross, Daniel J.; Grouws, Douglas A.

2011-01-01

This article describes the process of development of assessment instruments for a three-year longitudinal comparative study that focused on evaluating American high school students' mathematics learning from two distinct approaches to content organization: curriculum built around a sequence of three full-year courses (Algebra 1, Geometry, and…

The Russian Academy of Education's Centers for Innovative Development

ERIC Educational Resources Information Center

Martirosian, B. P.; Rubtsova, N. E.; Shapovalova, I. A.

2014-01-01

The article presents a review of the experience of practical testing (based in 385 experimental sites of the Russian Academy of Education) of current achievements of scientific academic schools that are developing the traditions of education. The organization of the innovative scientific and practical activity of the experimental sites of the…

Microsoft's Vista: Guarantees People with Special Needs Access to Computers

ERIC Educational Resources Information Center

Williams, John M.

2006-01-01

In this article, the author discusses the accessibility features of Microsoft's Windows Vista. One of the most innovative aspects of Windows Vista is a new accessibility and automated testing model called Microsoft UI Automation, which reduces development costs not only for accessible and assistive technology (AT) developers, but also for…

Use of Bloom's Taxonomy in Developing Reading Comprehension Specifications

ERIC Educational Resources Information Center

Luebke, Stephen; Lorie, James

2013-01-01

This article is a brief account of the use of Bloom's Taxonomy of Educational Objectives (Bloom, Engelhart, Furst, Hill, & Krathwohl, 1956) by staff of the Law School Admission Council in the 1990 development of redesigned specifications for the Reading Comprehension section of the Law School Admission Test. Summary item statistics for the…

The Authentic Personality: A Theoretical and Empirical Conceptualization and the Development of the Authenticity Scale

ERIC Educational Resources Information Center

Wood, Alex M.; Linley, P. Alex; Maltby, John; Baliousis, Michael; Joseph, Stephen

2008-01-01

This article describes the development of a measure of dispositional authenticity and tests whether authenticity is related to well-being, as predicted by several counseling psychology perspectives. Scales were designed to measure a tripartite conception of authenticity, comprising self-alienation, authentic living, and accepting external…

Understanding Latino Parents' Child Mental Health Literacy: Todos a bordo/All Aboard

ERIC Educational Resources Information Center

Umpierre, Mari; Meyers, Laura V.; Ortiz, Aida; Paulino, Angela; Rodriguez, Anita Rivera; Miranda, Ana; Rodriguez, Raquel; Kranes, Stephanie; McKay, Mary M.

2015-01-01

Objective: This article describes Phase 1 of a pilot that aims to develop, implement, and test an intervention to educate and simultaneously engage highly stressed Latino parents in child mental health services. A team of Spanish-speaking academic and community co-investigators developed the intervention using a community-based participatory…

Corpora and Language Assessment: The State of the Art

ERIC Educational Resources Information Center

Park, Kwanghyun

2014-01-01

This article outlines the current state of and recent developments in the use of corpora for language assessment and considers future directions with a special focus on computational methodology. Because corpora began to make inroads into language assessment in the 1990s, test developers have increasingly used them as a reference resource to…

The Impact of Advanced Curriculum on the Achievement of Mathematically Promising Elementary Students

ERIC Educational Resources Information Center

Gavin, M. Katherine; Casa, Tutita M.; Adelson, Jill L.; Carroll, Susan R.; Sheffield, Linda Jensen

2009-01-01

The primary aim of Project M[superscript 3]: Mentoring Mathematical Minds was to develop and field test advanced units for mathematically promising elementary students based on exemplary practices in gifted and mathematics education. This article describes the development of the units and reports on mathematics achievement results for students in…

Teen Choices, an Online Stage-Based Program for Healthy, Nonviolent Relationships: Development and Feasibility Trial

ERIC Educational Resources Information Center

Levesque, Deborah A.; Johnson, Janet L.; Prochaska, Janice M.

2017-01-01

This article describes the theoretical foundation, development, and feasibility testing of an online, evidence-based intervention for teen dating violence prevention designed for dissemination. Teen Choices, a program for healthy, nonviolent relationships, relies on the transtheoretical model of behavior change and expert system technology to…

Using Contextual Data for Education Quality Assessment: Developing and Testing Models

ERIC Educational Resources Information Center

Yastrebov, Gordey; Pinskaya, Marina; Kosaretsky, Sergey

2015-01-01

The article describes an approach to assessment of the performance of educational institutions with regard to their social context. To develop this approach, the authors were guided by (1) the results of numerous studies corroborating correlations between student performance and contextual factors (both in Russia and abroad); (2) the experience of…

Instrument Development and Validation of the Infant and Toddler Assessment for Quality Improvement

ERIC Educational Resources Information Center

Perlman, Michal; Brunsek, Ashley; Hepditch, Anne; Gray, Karen; Falenchuck, Olesya

2017-01-01

Research Findings: There is a growing need for accurate and efficient measures of classroom quality in early childhood education and care (ECEC) settings. Observational measures are costly, as their administration generally takes 3-5 hr per classroom. This article outlines the process of development and preliminary concurrent validity testing of…

Riding Elvis's Motorcycle: Using Self-Regulated Strategy Development To PLAN and WRITE for a State Writing Exam.

ERIC Educational Resources Information Center

De La Paz, Susan; Owen, Bonnie; Harris, Karen R.; Graham, Steve

2000-01-01

This article describes implementation of the Self-Regulated Strategy Development (SRSD) approach to help students learn a specific essay writing strategy in preparation for a state writing test. It also reviews the theoretical and research bases for using SRSD to teaching writing strategies. (Contains references.) (DB)

Assessment of the Risk of Bias in Rehabilitation Reviews

ERIC Educational Resources Information Center

Farmer, Sybil E.; Wood, Duncan; Swain, Ian D.; Pandyan, Anand D.

2012-01-01

Systematic reviews are used to inform practice, and develop guidelines and protocols. A questionnaire to quantify the risk of bias in systematic reviews, the review paper assessment (RPA) tool, was developed and tested. A search of electronic databases provided a data set of review articles that were then independently reviewed by two assessors…

Current Topics in Postnatal Behavioral Testing.

PubMed

Henck, Judith W; Elayan, Ikram; Vorhees, Charles; Fisher, J Edward; Morford, LaRonda L

2016-09-01

The study of developmental neurotoxicity (DNT) continues to be an important component of safety evaluation of candidate therapeutic agents and of industrial and environmental chemicals. Developmental neurotoxicity is considered to be an adverse change in the central and/or peripheral nervous system during development of an organism and has been primarily evaluated by studying functional outcomes, such as changes in behavior, neuropathology, neurochemistry, and/or neurophysiology. Neurobehavioral evaluations are a component of a wide range of toxicology studies in laboratory animal models, whereas neurochemistry and neurophysiology are less commonly employed. Although the primary focus of this article is on neurobehavioral evaluation in pre- and postnatal development and juvenile toxicology studies used in pharmaceutical development, concepts may also apply to adult nonclinical safety studies and Environmental Protection Agency/chemical assessments. This article summarizes the proceedings of a symposium held during the 2015 American College of Toxicology annual meeting and includes a discussion of the current status of DNT testing as well as potential issues and recommendations. Topics include the regulatory context for DNT testing; study design and interpretation; behavioral test selection, including a comparison of core learning and memory systems; age of testing; repeated testing of the same animals; use of alternative animal models; impact of findings; and extrapolation of animal results to humans. Integration of the regulatory experience and scientific concepts presented during this symposium, as well as from subsequent discussion and input, provides a synopsis of the current state of DNT testing in safety assessment, as well as a potential roadmap for future advancement. © The Author(s) 2016.

Gender Imbalance and Terrorism in Developing Countries.

PubMed

Younas, Javed; Sandler, Todd

2017-03-01

This article investigates whether gender imbalance may be conducive to domestic terrorism in developing countries. A female-dominated society may not provide sufficient administration, law, or order to limit domestic terrorism, especially since societies in developing countries primarily turn to males for administration, policing, and paramilitary forces. Other economic considerations support female imbalance resulting in grievance-generated terrorism. Because male dominance may also be linked to terrorism, empirical tests are ultimately needed to support our prediction. Based on panel data for 128 developing countries for 1975 to 2011, we find that female gender imbalance results in more total and domestic terrorist attacks. This female gender imbalance does not affect transnational terrorism in developing countries or domestic and transnational terrorism in developed countries. Further tests show that gender imbalance affects terrorism only when bureaucratic institutions are weak. Many robustness tests support our results.

Gender Imbalance and Terrorism in Developing Countries

PubMed Central

Younas, Javed

2016-01-01

This article investigates whether gender imbalance may be conducive to domestic terrorism in developing countries. A female-dominated society may not provide sufficient administration, law, or order to limit domestic terrorism, especially since societies in developing countries primarily turn to males for administration, policing, and paramilitary forces. Other economic considerations support female imbalance resulting in grievance-generated terrorism. Because male dominance may also be linked to terrorism, empirical tests are ultimately needed to support our prediction. Based on panel data for 128 developing countries for 1975 to 2011, we find that female gender imbalance results in more total and domestic terrorist attacks. This female gender imbalance does not affect transnational terrorism in developing countries or domestic and transnational terrorism in developed countries. Further tests show that gender imbalance affects terrorism only when bureaucratic institutions are weak. Many robustness tests support our results. PMID:28232755

Development and Application of a Portable Health Algorithms Test System

NASA Technical Reports Server (NTRS)

Melcher, Kevin J.; Fulton, Christopher E.; Maul, William A.; Sowers, T. Shane

2007-01-01

This paper describes the development and initial demonstration of a Portable Health Algorithms Test (PHALT) System that is being developed by researchers at the NASA Glenn Research Center (GRC). The PHALT System was conceived as a means of evolving the maturity and credibility of algorithms developed to assess the health of aerospace systems. Comprising an integrated hardware-software environment, the PHALT System allows systems health management algorithms to be developed in a graphical programming environment; to be tested and refined using system simulation or test data playback; and finally, to be evaluated in a real-time hardware-in-the-loop mode with a live test article. In this paper, PHALT System development is described through the presentation of a functional architecture, followed by the selection and integration of hardware and software. Also described is an initial real-time hardware-in-the-loop demonstration that used sensor data qualification algorithms to diagnose and isolate simulated sensor failures in a prototype Power Distribution Unit test-bed. Success of the initial demonstration is highlighted by the correct detection of all sensor failures and the absence of any real-time constraint violations.

Product Quality Research Institute evaluation of cascade impactor profiles of pharmaceutical aerosols: part 2--evaluation of a method for determining equivalence.

PubMed

Christopher, David; Adams, Wallace P; Lee, Douglas S; Morgan, Beth; Pan, Ziqing; Singh, Gur Jai Pal; Tsong, Yi; Lyapustina, Svetlana

2007-01-19

The purpose of this article is to present the thought process, methods, and interim results of a PQRI Working Group, which was charged with evaluating the chi-square ratio test as a potential method for determining in vitro equivalence of aerodynamic particle size distribution (APSD) profiles obtained from cascade impactor measurements. Because this test was designed with the intention of being used as a tool in regulatory review of drug applications, the capability of the test to detect differences in APSD profiles correctly and consistently was evaluated in a systematic way across a designed space of possible profiles. To establish a "base line," properties of the test in the simplest case of pairs of identical profiles were studied. Next, the test's performance was studied with pairs of profiles, where some difference was simulated in a systematic way on a single deposition site using realistic product profiles. The results obtained in these studies, which are presented in detail here, suggest that the chi-square ratio test in itself is not sufficient to determine equivalence of particle size distributions. This article, therefore, introduces the proposal to combine the chi-square ratio test with a test for impactor-sized mass based on Population Bioequivalence and describes methods for evaluating discrimination capabilities of the combined test. The approaches and results described in this article elucidate some of the capabilities and limitations of the original chi-square ratio test and provide rationale for development of additional tests capable of comparing APSD profiles of pharmaceutical aerosols.

Integration of optical measurement methods with flight parameter measurement systems

NASA Astrophysics Data System (ADS)

Kopecki, Grzegorz; Rzucidlo, Pawel

2016-05-01

During the AIM (advanced in-flight measurement techniques) and AIM2 projects, innovative modern techniques were developed. The purpose of the AIM project was to develop optical measurement techniques dedicated for flight tests. Such methods give information about aircraft elements deformation, thermal loads or pressure distribution, etc. In AIM2 the development of optical methods for flight testing was continued. In particular, this project aimed at the development of methods that could be easily applied in flight tests in an industrial setting. Another equally important task was to guarantee the synchronization of the classical measuring system with cameras. The PW-6U glider used in flight tests was provided by the Rzeszów University of Technology. The glider had all the equipment necessary for testing the IPCT (image pattern correlation technique) and IRT (infrared thermometry) methods. Additionally, equipment adequate for the measurement of typical flight parameters, registration and analysis has been developed. This article describes the designed system, as well as presenting the system’s application during flight tests. Additionally, the results obtained in flight tests show certain limitations of the IRT method as applied.

The development of European standard (CEN) methods in support of European Directives for plastics materials and articles intended to come into contact with foodstuff.

PubMed

Ashby, R

1994-01-01

CEC Directives have been implemented for plastics materials and articles intended to come into contact with foodstuffs. These introduce limits upon the overall migration from plastics into food and food simulants. In addition, specific migration limits or composition limits for free monomer in the final article, have been set for some monomers. Agreed test methods are required to allow these Directives to be respected. CEN, the European Committee for Standardization, has created a working group to develop suitable test methods. This is 'Working Group 5, Chemical Methods of Test', of CEN Technical Committee TC 194, Utensils in contact with food. This group has drafted a ten part standard for determining overall migration into aqueous and fatty food simulants by total immersion, by standard cell, by standard pouch and by filling. This draft standard has been approved by CEN TC 194 for circulation for public comment as a provisional standard, i.e. as an ENV. Further parts of this standard are in preparation for determining overall migration at high temperatures, etc. Simultaneously, Working Group 5 is cooperating with the BCR (Community Bureau of Reference) to produce reference materials with certified values of overall migration. CEN TC 194 Working Group 5 is also drafting methods for monomers subject to limitation in Directive 90/128/EEC. Good progress is being made on the monomers of highest priority but it is recognized that developing methods for all the monomers subject to limitation would take many years. Therefore, collaboration with the BCR, the Council of Europe and others is taking place to accelerate method development.

Deriving site-specific soil clean-up values for metals and metalloids: Rationale for including protection of soil microbial processes

PubMed Central

Kuperman, Roman G; Siciliano, Steven D; Römbke, Jörg; Oorts, Koen

2014-01-01

Although it is widely recognized that microorganisms are essential for sustaining soil fertility, structure, nutrient cycling, groundwater purification, and other soil functions, soil microbial toxicity data were excluded from the derivation of Ecological Soil Screening Levels (Eco-SSL) in the United States. Among the reasons for such exclusion were claims that microbial toxicity tests were too difficult to interpret because of the high variability of microbial responses, uncertainty regarding the relevance of the various endpoints, and functional redundancy. Since the release of the first draft of the Eco-SSL Guidance document by the US Environmental Protection Agency in 2003, soil microbial toxicity testing and its use in ecological risk assessments have substantially improved. A wide range of standardized and nonstandardized methods became available for testing chemical toxicity to microbial functions in soil. Regulatory frameworks in the European Union and Australia have successfully incorporated microbial toxicity data into the derivation of soil threshold concentrations for ecological risk assessments. This article provides the 3-part rationale for including soil microbial processes in the development of soil clean-up values (SCVs): 1) presenting a brief overview of relevant test methods for assessing microbial functions in soil, 2) examining data sets for Cu, Ni, Zn, and Mo that incorporated soil microbial toxicity data into regulatory frameworks, and 3) offering recommendations on how to integrate the best available science into the method development for deriving site-specific SCVs that account for bioavailability of metals and metalloids in soil. Although the primary focus of this article is on the development of the approach for deriving SCVs for metals and metalloids in the United States, the recommendations provided in this article may also be applicable in other jurisdictions that aim at developing ecological soil threshold values for protection of microbial processes in contaminated soils. PMID:24376192

Status of NASA's Space Launch System

NASA Technical Reports Server (NTRS)

Honeycutt, John; Cook, Jerry; Lyles, Garry

2016-01-01

NASA's Space Launch System (SLS) continued to make significant progress in 2015, completing hardware and testing that brings NASA closer to a new era of deep space exploration. The most significant program milestone of the year was completion of Critical Design Review (CDR). A team of independent reviewers concluded that the vehicle design is technically and programmatically ready to move to Design Certification Review (DCR) and launch readiness in 2018. Just four years after program start, every major element has amassed development and flight hardware and completed key tests that will set the stage for a growing schedule of manufacturing and testing in 2016. Key to SLS' rapid progress has been the use of existing technologies adapted to the new launch vehicle. The space shuttle-heritage RS-25 engine is undergoing adaptation tests to prove it can meet SLS requirements and environments with minimal change. The four-segment shuttle-era booster has been modified and updated with an additional propellant segment, new insulation, and new avionics. The Interim Cryogenic Upper Stage is a modified version of an existing upper stage. The first Block I SLS configuration will launch a minimum of 70 metric tons of payload to low Earth orbit (LEO). The vehicle architecture has a clear evolutionary path to more than 100 metric tons and, ultimately, to 130 metric tons. Among the program's major accomplishments in 2015 were the first booster qualification hotfire test, a series of seven RS-25 adaptation hotfire tests, manufacturing of most of the major components for both core stage test articles and first flight tank, delivery of the Pegasus core stage barge, and the upper stage simulator. Renovations to the B-2 test stand for stage green run testing was completed at NASA Stennis Space Center. This year will see the second booster qualification motor hotfire, flight and additional development RS-25 engine tests, and completion of core stage test articles and test stands and several flight article sections. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

Status of NASA's Space Launch System

NASA Technical Reports Server (NTRS)

Lyles, Garry

2016-01-01

NASA's Space Launch System (SLS) continued to make significant progress in 2015, completing hardware and testing that brings NASA closer to a new era of deep space exploration. The most significant program milestone of the year was completion of Critical Design Review (CDR). A team of independent reviewers concluded that the vehicle design is technically and programmatically ready to move to Design Certification Review (DCR) and launch readiness in 2018. Just four years after program start, every major element has amassed development and flight hardware and completed key tests that will set the stage for a growing schedule of manufacturing and testing in 2016. Key to SLS' rapid progress has been the use of existing technologies adapted to the new launch vehicle. The space shuttle-heritage RS-25 engine is undergoing adaptation tests to prove it can meet SLS requirements and environments with minimal change. The four-segment shuttle-era booster has been modified and updated with an additional propellant segment, new insulation, and new avionics. The Interim Cryogenic Upper Stage is a modified version of an existing upper stage. The first Block I SLS configuration will launch a minimum of 70 metric tons (t) of payload to low Earth orbit (LEO). The vehicle architecture has a clear evolutionary path to more than 100t and, ultimately, to 130t. Among the program's major accomplishments in 2015 were the first booster qualification hotfire test, a series of seven RS-25 adaptation hotfire tests, manufacturing of most of the major components for both core stage test articles and first flight tank, delivery of the Pegasus core stage barge, and the upper stage simulator. Renovations to the B-2 test stand for stage green run testing was completed at NASA Stennis Space Center. This year will see the second booster qualification motor hotfire, flight and additional development RS-25 engine tests, and completion of core stage test articles and test stands and several flight article sections. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

Hand tools: A complization. [for industrial application

NASA Technical Reports Server (NTRS)

1974-01-01

Technical information is provided for recent developments in hand tools for assembly and disassembly application, for materials finishing, and for inspection, analysis, and testing. Photographs or diagrams accompany each description and patent information is included with several articles.

Biotelemetry for Monitoring Electrocardiograms during Athletic Events and Stress Tests

ERIC Educational Resources Information Center

Mitchell, B. W.; Thomasson, G. O.

1975-01-01

This article discusses a study attempting to determine if a biotelemetry system developed for use on chickens could be suitable for monitoring electrocardiograms of humans during exercise. Techniques for its use are reviewed. (JS)

Development of Water Softening Method of Intake in Magnitogorsk

NASA Astrophysics Data System (ADS)

Meshcherova, E. A.; Novoselova, J. N.; Moreva, J. A.

2017-11-01

This article contains an appraisal of the drinking water quality of Magnitogorsk intake. A water analysis was made which led to the conclusion that the standard for general water hardness was exceeded. As a result, it became necessary to develop a number of measures to reduce water hardness. To solve this problem all the necessary studies of the factors affecting the value of increased water hardness were carried out and the water softening method by using an ion exchange filter was proposed. The calculation of the cation-exchanger filling volume of the proposed filter is given in the article, its overall dimensions are chosen. The obtained calculations were confirmed by the results of laboratory studies by using the test installation. The research and laboratory tests results make the authors conclude that the proposed method should be used to obtain softened water for the requirements of SanPin.

Analytical prediction of the interior noise for cylindrical models of aircraft fuselages for prescribed exterior noise fields. Phase 2: Models for sidewall trim, stiffened structures and cabin acoustics with floor partition

NASA Technical Reports Server (NTRS)

Pope, L. D.; Wilby, E. G.

1982-01-01

An airplane interior noise prediction model is developed to determine the important parameters associated with sound transmission into the interiors of airplanes, and to identify apropriate noise control methods. Models for stiffened structures, and cabin acoustics with floor partition are developed. Validation studies are undertaken using three test articles: a ring stringer stiffened cylinder, an unstiffened cylinder with floor partition, and ring stringer stiffened cylinder with floor partition and sidewall trim. The noise reductions of the three test articles are computed using the heoretical models and compared to measured values. A statistical analysis of the comparison data indicates that there is no bias in the predictions although a substantial random error exists so that a discrepancy of more than five or six dB can be expected for about one out of three predictions.

Recent developments in broadly applicable structure-biodegradability relationships.

PubMed

Jaworska, Joanna S; Boethling, Robert S; Howard, Philip H

2003-08-01

Biodegradation is one of the most important processes influencing concentration of a chemical substance after its release to the environment. It is the main process for removal of many chemicals from the environment and therefore is an important factor in risk assessments. This article reviews available methods and models for predicting biodegradability of organic chemicals from structure. The first section of the article briefly discusses current needs for biodegradability estimation methods related to new and existing chemicals and in the context of multimedia exposure models. Following sections include biodegradation test methods and endpoints used in modeling, with special attention given to the Japanese Ministry of International Trade and Industry test; a primer on modeling, describing the various approaches that have been used in the structure/biodegradability relationship work, and contrasting statistical and mechanistic approaches; and recent developments in structure/biodegradability relationships, divided into group contribution, chemometric, and artificial intelligence approaches.

"Salivary exRNA biomarkers to detect gingivitis and monitor disease regression".

PubMed

Kaczor-Urbanowicz, Karolina Elżbieta; Trivedi, Harsh M; Lima, Patricia O; Camargo, Paulo M; Giannobile, William V; Grogan, Tristan R; Gleber-Netto, Frederico O; Whiteman, Yair; Li, Feng; Lee, Hyo Jung; Dharia, Karan; Aro, Katri; Carerras-Presas, Carmen Martin; Amuthan, Saarah; Vartak, Manjiri; Akin, David; Al-Adbullah, Hiba; Bembey, Kanika; Klokkevold, Perry R; Elashoff, David; Barnes, Virginia Monsul; Richter, Rose; DeVizio, William; Masters, James G; Wong, David

2018-05-19

This study tests the hypothesis that salivary extracellular RNA (exRNA) biomarkers can be developed for gingivitis detection and monitoring disease regression. Salivary exRNA biomarker candidates were developed from a total of 100 gingivitis and non-gingivitis individuals using Affymetrix's expression microarrays. The top ten differentially expressed exRNAs were tested in a clinical cohort to determine if the discovered salivary exRNA markers for gingivitis were associated with clinical gingivitis and disease regression. For this purpose, unstimulated saliva was collected from 30 randomly selected gingivitis subjects, the gingival and plaque indexes scores were taken at baseline, 3 & 6 weeks and salivary exRNAs were assayed by means of reverse transcription quantitative polymerase chain reaction. Eight salivary exRNA biomarkers developed for gingivitis were statistically significantly changed over time, consistent with disease regression. A panel of four salivary exRNAs [SPRR1A, lnc-TET3-2:1, FAM25A, CRCT1] can detect gingivitis with a clinical performance of 0.91 area under the curve (AUC), with 71% sensitivity and 100% specificity. The clinical values of the developed salivary exRNA biomarkers are associated with gingivitis regression. They offer strong potential to be advanced for definitive validation and clinical laboratory development test (LDT). This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

What are older Latinos told about physical activity and cognition? A content analysis of a top-circulating magazine.

PubMed

Rose, India D; Friedman, Daniela B; Marquez, David X; Fernandez, Karen

2013-10-01

Physical activity (PA) may reduce risk of developing Alzheimer's disease (AD). The objectives of this study were to: (a) Compare the content of English and Spanish PA-focused articles in American Association of Retired Persons (AARP) magazines; and (b) Determine whether these articles discuss PA as a potential correlate of AD. AARP (English) and AARP Segunda Juventud (Spanish) magazines were assessed for PA coverage from 2009 to 2010. Articles were analyzed using nonparametric tests. A total of 63 articles discussed PA (48 English; 15 Spanish). In AARP English, 70.8% of articles discussed formal exercise, while 53.3% of Spanish articles discussed formal exercise. Only three English articles mentioned that PA has the potential to reduce risk of AD. No Spanish articles mentioned this association. Spanish content did not adequately present cognitive health information. Culturally appropriate media coverage is needed to inform diverse populations about cognitive health and risks of AD.

Regulating the advertising of genetic tests in Europe: a balancing act.

PubMed

Kalokairinou, Louiza; Borry, Pascal; Howard, Heidi Carmen

2017-10-01

Direct-to-consumer (DTC) genetic tests (GT) have provoked criticism over their potential adverse impact on public health. The European Parliament called for a ban on DTC advertising of GT during the debate for the adoption of a European Regulation on in vitro diagnostic medical devices. This proposal, however, was not ultimately retained in the final text. Instead, the regulation includes an article prohibiting misleading claims for this kind of advertising. These two different approaches raise questions about the optimal degree of regulation. Herein, we provide an overview of the ways GT have been advertised and related ethical issues. Subsequently, the laws regulating the advertising of GT at the European Union and national level are examined. Finally, recent regulatory developments are discussed. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Educational testing validity and reliability in pharmacy and medical education literature.

PubMed

Hoover, Matthew J; Jung, Rose; Jacobs, David M; Peeters, Michael J

2013-12-16

To evaluate and compare the reliability and validity of educational testing reported in pharmacy education journals to medical education literature. Descriptions of validity evidence sources (content, construct, criterion, and reliability) were extracted from articles that reported educational testing of learners' knowledge, skills, and/or abilities. Using educational testing, the findings of 108 pharmacy education articles were compared to the findings of 198 medical education articles. For pharmacy educational testing, 14 articles (13%) reported more than 1 validity evidence source while 83 articles (77%) reported 1 validity evidence source and 11 articles (10%) did not have evidence. Among validity evidence sources, content validity was reported most frequently. Compared with pharmacy education literature, more medical education articles reported both validity and reliability (59%; p<0.001). While there were more scholarship of teaching and learning (SoTL) articles in pharmacy education compared to medical education, validity, and reliability reporting were limited in the pharmacy education literature.

NASA's Space Launch System: Development and Progress

NASA Technical Reports Server (NTRS)

Honeycutt, John; Lyles, Garry

2016-01-01

NASA is embarked on a new era of space exploration that will lead to new capabilities, new destinations, and new discoveries by both human and robotic explorers. Today, the International Space Station (ISS), supported by NASA's commercial partners, and robotic probes, are yielding knowledge that will help make this exploration possible. NASA is developing both the Orion crew vehicle and the Space Launch System (SLS) that will carry out a series of increasingly challenging missions that will eventually lead to human exploration of Mars. This paper will discuss the development and progress on the SLS. The SLS architecture was designed to be safe, affordable, and sustainable. The current configuration is the result of literally thousands of trade studies involving cost, performance, mission requirements, and other metrics. The initial configuration of SLS, designated Block 1, will launch a minimum of 70 metric tons (t) into low Earth orbit - significantly greater capability than any current launch vehicle. It is designed to evolve to a capability of 130 t through the use of upgraded main engines, advanced boosters, and a new upper stage. With more payload mass and volume capability than any rocket in history, SLS offers mission planners larger payloads, faster trip times, simpler design, shorter design cycles, and greater opportunity for mission success. Since the program was officially created in fall 2011, it has made significant progress toward first launch readiness of the Block 1 vehicle in 2018. Every major element of SLS continued to make significant progress in 2015. The Boosters element fired Qualification Motor 1 (QM-1) in March 2015, to test the 5-segment motor, including new insulation, joint, and propellant grain designs. The Stages element marked the completion of more than 70 major components of test article and flight core stage tanks. The Liquid Engines element conducted seven test firings of an RS-25 engine under SLS conditions. The Spacecraft/Payload Integration and Evolution element marked completion of the upper stage test article. Major work continues in 2016 as the program continues both flight and development RS-25 engine testing, begins welding test article and flight core stage tanks, completes stage adapter manufacturing, and test fires the second booster qualification motor. This paper will discuss the program's key accomplishments to date and the challenging work ahead for what will be the world's most capable launch vehicle.

NASA's SPACE LAUNCH SYSTEM: Development and Progress

NASA Technical Reports Server (NTRS)

Honeycutt, John; Lyles, Garry

2016-01-01

NASA is embarked on a new era of space exploration that will lead to new capabilities, new destinations, and new discoveries by both human and robotic explorers. Today, the International Space Station (ISS) and robotic probes are yielding knowledge that will help make this exploration possible. NASA is developing both the Orion crew vehicle and the Space Launch System (SLS) (Figure 1), that will carry out a series of increasingly challenging missions leading to human exploration of Mars. This paper will discuss the development and progress on the SLS. The SLS architecture was designed to be safe, affordable, and sustainable. The current configuration is the result of literally thousands of trade studies involving cost, performance, mission requirements, and other metrics. The initial configuration of SLS, designated Block 1, will launch a minimum of 70 metric tons (mT) (154,324 pounds) into low Earth orbit - significantly greater capability than any current launch vehicle. It is designed to evolve to a capability of 130 mT (286,601 pounds) through the use of upgraded main engines, advanced boosters, and a new upper stage. With more payload mass and volume capability than any existing rocket, SLS offers mission planners larger payloads, faster trip times, simpler design, shorter design cycles, and greater opportunity for mission success. Since the program was officially created in fall 2011, it has made significant progress toward launch readiness in 2018. Every major element of SLS continued to make significant progress in 2015. Engineers fired Qualification Motor 1 (QM-1) in March 2015 to test the 5-segment motor, including new insulation, joint, and propellant grain designs. More than 70 major components of test article and flight hardware for the Core Stage have been manufactured. Seven test firings have been completed with an RS-25 engine under SLS operating conditions. The test article for the Interim Cryogenic Propulsion Stage (ICPS) has also been completed. Major work continues in 2016 as the program continues both flight and development RS-25 engine testing, begins welding test article and flight core stage tanks, completes stage adapter manufacturing, and test fires the second booster qualification motor. This paper will discuss the program's key accomplishments to date and the challenging work ahead for what will be the world's most capable launch vehicle.

Integrating clinical decision support systems for pharmacogenomic testing into clinical routine - a scoping review of designs of user-system interactions in recent system development.

PubMed

Hinderer, Marc; Boeker, Martin; Wagner, Sebastian A; Lablans, Martin; Newe, Stephanie; Hülsemann, Jan L; Neumaier, Michael; Binder, Harald; Renz, Harald; Acker, Till; Prokosch, Hans-Ulrich; Sedlmayr, Martin

2017-06-06

Pharmacogenomic clinical decision support systems (CDSS) have the potential to help overcome some of the barriers for translating pharmacogenomic knowledge into clinical routine. Before developing a prototype it is crucial for developers to know which pharmacogenomic CDSS features and user-system interactions have yet been developed, implemented and tested in previous pharmacogenomic CDSS efforts and if they have been successfully applied. We address this issue by providing an overview of the designs of user-system interactions of recently developed pharmacogenomic CDSS. We searched PubMed for pharmacogenomic CDSS published between January 1, 2012 and November 15, 2016. Thirty-two out of 118 identified articles were summarized and included in the final analysis. We then compared the designs of user-system interactions of the 20 pharmacogenomic CDSS we had identified. Alerts are the most widespread tools for physician-system interactions, but need to be implemented carefully to prevent alert fatigue and avoid liabilities. Pharmacogenomic test results and override reasons stored in the local EHR might help communicate pharmacogenomic information to other internal care providers. Integrating patients into user-system interactions through patient letters and online portals might be crucial for transferring pharmacogenomic data to external health care providers. Inbox messages inform physicians about new pharmacogenomic test results and enable them to request pharmacogenomic consultations. Search engines enable physicians to compare medical treatment options based on a patient's genotype. Within the last 5 years, several pharmacogenomic CDSS have been developed. However, most of the included articles are solely describing prototypes of pharmacogenomic CDSS rather than evaluating them. To support the development of prototypes further evaluation efforts will be necessary. In the future, pharmacogenomic CDSS will likely include prediction models to identify patients who are suitable for preemptive genotyping.

Benchmark Calibration Tests Completed for Stirling Convertor Heater Head Life Assessment

NASA Technical Reports Server (NTRS)

Krause, David L.; Halford, Gary R.; Bowman, Randy R.

2005-01-01

A major phase of benchmark testing has been completed at the NASA Glenn Research Center (http://www.nasa.gov/glenn/), where a critical component of the Stirling Radioisotope Generator (SRG) is undergoing extensive experimentation to aid the development of an analytical life-prediction methodology. Two special-purpose test rigs subjected SRG heater-head pressure-vessel test articles to accelerated creep conditions, using the standard design temperatures to stay within the wall material s operating creep-response regime, but increasing wall stresses up to 7 times over the design point. This resulted in well-controlled "ballooning" of the heater-head hot end. The test plan was developed to provide critical input to analytical parameters in a reasonable period of time.

Antioxidant health messages in Canadian women's magazines.

PubMed

Steinberg, Alissa; Paisley, Judy; Bandayrel, Kristofer

2011-01-01

Recently, antioxidants have taken centre stage in media and advertising messages. While 80% of Canadians think they are well-informed about nutrition, many are confused about the health effects of specific nutrients. Forty-six percent of Canadians seek information from newspapers and books, and 67% of women rely on magazines. We examined the content and accuracy of antioxidant health messages in Canadian women's magazines. The top three Canadian magazines targeted at women readers were selected. A screening tool was developed, pilot tested, and used to identify eligible articles. A coding scheme was created to define variables, which were coded and analyzed. Seventy-seven percent of 36 magazine issues contained articles that mentioned antioxidants (n=56). Seventy-one percent (n=40) of articles reported positive health effects related to antioxidant consumption, and 36% and 40% of those articles framed those effects as definite and potential, respectively (p<0.01). The articles sampled conveyed messages about positive antioxidant health effects that are not supported by current evidence. Improved standards of health reporting are needed. Nutrition professionals may need to address this inaccuracy when they develop communications on antioxidants and health risk.

SIRTF primary mirror design, analysis, and testing

NASA Technical Reports Server (NTRS)

Sarver, George L., III; Maa, Scott; Chang, LI

1990-01-01

The primary mirror assembly (PMA) requirements and concepts for the Space Infrared Telescope Facility (SIRTF) program are discussed. The PMA studies at NASA/ARC resulted in the design of two engineering test articles, the development of a mirror mount cryogenic static load testing system, and the procurement and partial testing of a full scale spherical mirror mounting system. Preliminary analysis and testing of the single arch mirror with conical mount design and the structured mirror with the spherical mount design indicate that the designs will meet all figure and environmental requirements of the SIRTF program.

Consistent Structural Integrity and Efficient Certification with Analysis. Volume 2: Detailed Report on Innovative Research Developed, Applied, and Commercially Available

DTIC Science & Technology

2005-05-01

RESULTS ................................................................................................................49 5.3.1 Phase I Test Data...Ins 3 2.2a Wrinkling failure test article 7 2.2b Test results for a) Set A “0° core”, and b) Set B “90° core” 7 2.2c Test ... results for c) Set E “Isotropic (Foam) Core” 8 2.3 P = T because test data not yet reanalyzed with established CFs 9 2.4 P and T are now different

Results of 30 kWt Safe Affordable Fission Engine (SAFE-30) primary heat transport testing

NASA Astrophysics Data System (ADS)

Pedersen, Kevin; van Dyke, Melissa; Houts, Mike; Godfroy, Tom; Martin, James; Dickens, Ricky; Williams, Eric; Harper, Roger; Salvil, Pat; Reid, Bob

2001-02-01

The use of resistance heaters to simulate heat from fission allows extensive development of fission systems to be performed in non-nuclear test facilities, saving time and money. Resistance heated tests on the Safe Affordable Fission Engine-30 kilowatt (SAFE30) test article are being performed at the Marshall Space Flight Center. This paper discusses the results of these experiments to date, and describes the additional testing that will be performed. Recommendations related to the design of testable space fission power and propulsion systems are made. .

Diagnostic Profiles: A Standard Setting Method for Use with a Cognitive Diagnostic Model

ERIC Educational Resources Information Center

Skaggs, Gary; Hein, Serge F.; Wilkins, Jesse L. M.

2016-01-01

This article introduces the Diagnostic Profiles (DP) standard setting method for setting a performance standard on a test developed from a cognitive diagnostic model (CDM), the outcome of which is a profile of mastered and not-mastered skills or attributes rather than a single test score. In the DP method, the key judgment task for panelists is a…

Determination of Periodicity of Certification Electrical Personal

NASA Astrophysics Data System (ADS)

Sidorov, Aleksandr I.; Khanzhina, Olga A.

2016-10-01

The article presents the data on electrical injuries to staff caused by violation of labour protection rules. Proposed and justified system of certification of electrotechnical personnel, taking into account the education (higher, secondary professional, primary professional group for electrical, the result of the previous test knowledge of electrical safety, floors appraise. The results of the knowledge test using the developed system.

Full-Scale Experimental Verification of Soft-Story-Only Retrofits of Wood-Frame Buildings using Hybrid Testing

Treesearch

Elaina Jennings; John W. van de Lindt; Ershad Ziaei; Pouria Bahmani; Sangki Park; Xiaoyun Shao; Weichiang Pang; Douglas Rammer; Gary Mochizuki; Mikhail Gershfeld

2015-01-01

The FEMA P-807 Guidelines were developed for retrofitting soft-story wood-frame buildings based on existing data, and the method had not been verified through full-scale experimental testing. This article presents two different retrofit designs based directly on the FEMA P-807 Guidelines that were examined at several different seismic intensity levels. The...

Assessing K-5 Teacher Leaders' Mathematical Understanding: What Have the Test Makers and the Test Takers Learned?

ERIC Educational Resources Information Center

Ellington, Aimee J.; Whitenack, Joy W.; Inge, Vickie L.; Murray, Megan K.; Schneider, Patti J.

2012-01-01

This article describes the design and implementation of an assessment instrument for Numbers and Operations, the first course in a program to train elementary mathematics specialists. We briefly describe the course and its content, and then we elaborate on the process we used to develop the assessment instrument and the corresponding rubric for…

Testing Aspects of the Usability of an Online Learner Dictionary Prototype: A Product- and Process-Oriented Study

ERIC Educational Resources Information Center

Hamel, Marie-Josee

2012-01-01

This article reports on a study which took place in the context of the design and development of an online dictionary prototype for learners of French. Aspects of the "usability", i.e. the quality of the "learner-task-dictionary interaction" of the prototype were tested. Micro-tasks were designed to focus on learners'…

A wall interference assessment/correction system

NASA Technical Reports Server (NTRS)

Lo, Ching F.; Overby, Glenn; Qian, Cathy X.; Sickles, W. L.; Ulbrich, N.

1992-01-01

A Wall Signature method originally developed by Hackett has been selected to be adapted for the Ames 12-ft Wind Tunnel WIAC system in the project. This method uses limited measurements of the static pressure at the wall, in conjunction with the solid wall boundary condition, to determine the strength and distribution of singularities representing the test article. The singularities are used in turn for estimating blockage wall interference. The lifting interference will be treated separately by representing in a horseshoe vortex system for the model's lifting effects. The development and implementation of a working prototype will be completed, delivered and documented with a software manual. The WIAC code will be validated by conducting numerically simulated experiments rather than actual wind tunnel experiments. The simulations will be used to generate both free-air and confined wind-tunnel flow fields for each of the test articles over a range of test configurations. Specifically, the pressure signature at the test section wall will be computed for the tunnel case to provide the simulated 'measured' data. These data will serve as the input for the WIAC method--Wall Signature method. The performance of the WIAC method then may be evaluated by comparing the corrected data with those of the free-air simulation.

Development of X-33/X-34 Aerothermodynamic Data Bases: Lessons Learned and Future Enhancements

NASA Technical Reports Server (NTRS)

Miller, C. G.

1999-01-01

A synoptic of programmatic and technical lessons learned in the development of aerothermodynamic data bases for the X-33 and X-34 programs is presented in general terms and from the perspective of the NASA Langley Research Center Aerothermodynamics Branch. The format used is that of the aerothermodynamic chain, the links of which are personnel, facilities, models/test articles, instrumentation, test techniques, and computational fluid dynamics (CFD). Because the aerodynamic data bases upon which the X-33 and X-34 vehicles will fly are almost exclusively from wind tunnel testing, as opposed to CFD, the primary focus of the lessons learned is on ground-based testing.

F15B-Quiet Spike Aeroservoelastic Flight Test Data Analysis

NASA Technical Reports Server (NTRS)

Brenner, Martin J.

2007-01-01

Airframe structural morphing technologies designed to mitigate sonic boom strength are being developed by Gulfstream Aerospace Corporation (GAC). Among these technologies is a concept in which an aircraft's frontend would be extended prior to supersonic acceleration. This morphing would effectively lengthen the vehicle, reducing peak sonic boom amplitude, but is also expected to partition the otherwise strong bow shock into a series of reduced-strength, non-coalescing shocklets. This combination of boom shaping techniques is predicted to transform the classic, high-impulse N-wave pattern typically generated by an aircraft traveling at supersonic speed into a signature more closely resembling a sinusoidal wave with a greatly reduced perceived loudness. 'QuietSpike' is GAC's nomenclature for its recently patented front-end vehicle morphing arrangement. The ability of Quiet Spike to effectively shape a vehicle's far- field sonic boom signature is highly dependent on the area distribution characteristics of the aircraft. The full aeroacoustic benefits of front-end morphing at farfield are only possible when the QuietSpike article and vehicle configuration are designed in consideration of each other. Adding QuietSpike technology to the airframe of an existing, non-boom-optimized supersonic vehicle is unlikely to result in an improved far-field signature due to the generally over-powering influence of wing- and inlet-generated shocks. Therefore, it is generally recognized within NASA and the industry that a clean-sheet vehicle design is required to demonstrate the theoretically predicted far-field aeroacoustic benefits of QuietSpike type morphing and other boom- mitigating concepts. NASA's Aeronautics Research Mission Directorate (ARMD) Supersonics Division has placed increased priority on near-term development and flight-testing of such a vehicle. To help achieve this objective, static and dynamic aerostructural proof-of-concept testing was considered a prudent step prior to a clean-sheet effort in order to reduce risk associated with a follow-on test program. Following a survey of potential test platforms, NASA Dryden's F-15B was selected as the target test vehicle primarily because of its unique ability to carry a largescale test apparatus to relevant supersonic flight speeds, so called the F15 -QS. The QuietSpike test article was constructed primarily of composite materials and attached to the forward fuselage of the F-1 5B bulkhead (see Figures 1,2). The QuietSpike test article replaces the current flight test noseboom and radome assembly. Power is supplied to the Quiet Spike motor assembly in order to extend and retract the Spike, and the Quiet Spike test article was appropriately instrumented with accelerometers, strain gages, pressure transducers, and thermocouples.

Scientific and Regulatory Policy Committee (SRPC) Points to Consider*: Histopathology Evaluation of the Pubertal Development and Thyroid Function Assay (OPPTS 890.1450, OPPTS 890.1500) in Rats to Screen for Endocrine Disruptors

PubMed Central

Keane, Kevin A.; Parker, George A.; Regan, Karen S.; Picut, Catherine; Dixon, Darlene; Creasy, Dianne; Giri, Dipak; Hukkanen, Renee R.

2015-01-01

The U.S. Environmental Protection Agency Endocrine Disruptor Screening Program (EDSP) is a multitiered approach to determine the potential for environmental chemicals to alter the endocrine system. The Pubertal Development and Thyroid Function in Intact Juvenile/Peripubertal Female and Male Rats (OPPTS 890.1450, 890.1500) are 2 of the 9 EDSP tier 1 test Guidelines, which assess upstream mechanistic pathways along with downstream morphological end points including histological evaluation of the kidneys, thyroid, and select male/female reproductive tissues (ovaries, uterus, testes, and epididymides). These assays are part of a battery of in vivo and in vitro screens used for initial detection of test article endocrine activity. In this Points to Consider article, we describe tissue processing, evaluation, and nomenclature to aid in standardization of assay results across laboratories. Pubertal assay end points addressed include organ weights, estrous cyclicity, clinical pathology, hormonal assays, and histological evaluation. Potential treatment-related findings that may indicate endocrine disruption are reviewed. Additional tissues that may be useful in assessment of endocrine disruption (vagina, mammary glands, and liver) are discussed. This Points to Consider article is intended to provide information for evaluating peripubertal tissues within the context of individual assay end points, the overall pubertal assay, and tier I assays of the EDSP program. PMID:25948506

Advanced Capabilities for Wind Tunnel Testing in the 21st Century

NASA Technical Reports Server (NTRS)

Kegelman, Jerome T.; Danehy, Paul M.; Schwartz, Richard J.

2010-01-01

Wind tunnel testing methods and test technologies for the 21st century using advanced capabilities are presented. These capabilities are necessary to capture more accurate and high quality test results by eliminating the uncertainties in testing and to facilitate verification of computational tools for design. This paper discusses near term developments underway in ground testing capabilities, which will enhance the quality of information of both the test article and airstream flow details. Also discussed is a selection of new capability investments that have been made to accommodate such developments. Examples include advanced experimental methods for measuring the test gas itself; using efficient experiment methodologies, including quality assurance strategies within the test; and increasing test result information density by using extensive optical visualization together with computed flow field results. These points could be made for both major investments in existing tunnel capabilities or for entirely new capabilities.

Trace Contaminant Testing with the Orion Atmosphere Revitalization Technology

NASA Technical Reports Server (NTRS)

Button, Amy Lin; Sweterlitsch, Jeffrey; Broerman, Craig

2009-01-01

Every spacecraft atmosphere contains trace contaminants resulting from offgassing by cabin materials and human passengers. An amine-based carbon dioxide (CO2) and water vapor sorbent in pressure-swing regenerable beds has been developed by Hamilton Sundstrand and baselined for the Orion Atmosphere Revitalization System (ARS). Part of the risk mitigation effort for this new technology is the study of how atmospheric trace contaminants will affect and be affected by the technology. One particular area of concern is ammonia, which, in addition to the normal spacecraft sources, can also be off-gassed by the amine-based sorbent. In the first half of 2009, tests were performed with typical cabin atmosphere levels of five of the most common trace gases, most of which had not yet been tested with this technology. A subscale sample of the sorbent was exposed to each of the chemicals mixed into a stream of moist, CO2-laden air, and the CO2 adsorption capacity of the sorbent was compared before and after the exposure. After these typical-concentration chemicals were proven to have negligible effect on the subscale sample, tests proceeded on a full-scale test article in a sealed chamber with a suite of eleven contaminants. To isolate the effects of various test rig components, several extended-duration tests were run: without injection or scrubbing, with injection and without scrubbing, with injection and scrubbing by both the test article and dedicated trace contaminant filters, and with injection and scrubbing by only the test article. The high-level results of both the subscale and full-scale tests are examined in this paper.

Thermal performance demonstration of a prototype internally cooled nose tip/forebody/window assembly

NASA Astrophysics Data System (ADS)

Wojciechowski, Carl J.; Brooks, Lori C.; Teal, Gene; Karu, Zain; Kalin, David A.; Jones, Gregory W.; Romero, Harold

1996-11-01

Internally liquid cooled apertures (windows) installed in a full size forebody have been characterized under high heat flux conditions representative of endoatmospheric flight. Analysis and test data obtained in the laboratory and at arc heater test facilities at Arnold Engineering Development Center and NASA Ames are presented in this paper. Data for several types of laboratory bench tests are presented: transmission interferometry and imaging, coolant pressurization effects on optical quality, and coolant flow rate calibrations for both the window and other internally cooled components. Initially, using heat transfer calibration models identical in shape to the flight test articles, arc heater facility thermal test environments were obtained at several conditions representative of full flight thermal environments. Subsequent runs tested the full-up flight article including nosetip, forebody and aperture for full flight duplication of surface heating rates and exposure ties. Pretest analyses compared will to test measurements. These data demonstrate a very efficient internal liquid cooling design which can be applied to other applications such as cooled mirrors for high heat flux applications.

Experimental Assessment of the Reciprocating Feed System

NASA Technical Reports Server (NTRS)

Eddleman, David E.; Blackmon, James B.; Morton, Christopher D.

2006-01-01

The primary goal of this project was to design, construct, and test a full scale, high pressure simulated propellant feed system test bed that could evaluate the ability of the Reciprocating Feed System (RFS) to provide essentially constant flow rates and pressures to a rocket engine. The two key issues addressed were the effects of the transition of the drain cycle from tank to tank and the benefits of other hardware such as accumulators to provide a constant pressure flow rate out of the RFS. The test bed provided 500 psi flow at rates of the order of those required for engines in the 20,000 lbf thrust class (e.g., 20 to 40 lb/sec). A control system was developed in conjunction with the test article and automated system operation was achieved. Pre-test planning and acceptance activities such as a documented procedure and hazard analysis were conducted and the operation of the test article was approved by, and conducted in coordination with, appropriate NASA Marshall Space Flight Center personnel under a Space Act Agreement. Tests demonstrated successful control of flow rates and pressures.

Design and Implementation of a Characterization Test Rig for Evaluating High Bandwidth Liquid Fuel Flow Modulators

NASA Technical Reports Server (NTRS)

Saus, Joseph R.; Chang, Clarence T.; DeLaat, John C.; Vrnak, Daniel R.

2010-01-01

A test rig was designed and developed at the NASA Glenn Research Center (GRC) for the purpose of characterizing high bandwidth liquid fuel flow modulator candidates to determine their suitability for combustion instability control research. The test rig is capable of testing flow modulators at up to 600 psia supply pressure and flows of up to 2 gpm. The rig is designed to provide a quiescent flow into the test section in order to isolate the dynamic flow modulations produced by the test article. Both the fuel injector orifice downstream of the test article and the combustor are emulated. The effect of fuel delivery line lengths on modulator dynamic performance can be observed and modified to replicate actual fuel delivery systems. For simplicity, water is currently used as the working fluid, although future plans are to use jet fuel. The rig is instrumented for dynamic pressures and flows and a high-speed data system is used for dynamic data acquisition. Preliminary results have been obtained for one candidate flow modulator.

48 CFR 52.209-3 - First Article Approval-Contractor Testing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false First Article Approval... Clauses 52.209-3 First Article Approval—Contractor Testing. As prescribed in 9.308-1 (a) and (b), insert the following clause: First Article Approval—Contractor Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-4 - First Article Approval-Government Testing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 2 2013-10-01 2013-10-01 false First Article Approval... Clauses 52.209-4 First Article Approval—Government Testing. As prescribed in 9.308-2 (a) and (b), insert the following clause: First Article Approval—Government Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-4 - First Article Approval-Government Testing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 2 2012-10-01 2012-10-01 false First Article Approval... Clauses 52.209-4 First Article Approval—Government Testing. As prescribed in 9.308-2 (a) and (b), insert the following clause: First Article Approval—Government Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-4 - First Article Approval-Government Testing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false First Article Approval... Clauses 52.209-4 First Article Approval—Government Testing. As prescribed in 9.308-2 (a) and (b), insert the following clause: First Article Approval—Government Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-4 - First Article Approval-Government Testing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 2 2014-10-01 2014-10-01 false First Article Approval... Clauses 52.209-4 First Article Approval—Government Testing. As prescribed in 9.308-2 (a) and (b), insert the following clause: First Article Approval—Government Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-3 - First Article Approval-Contractor Testing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 2 2014-10-01 2014-10-01 false First Article Approval... Clauses 52.209-3 First Article Approval—Contractor Testing. As prescribed in 9.308-1 (a) and (b), insert the following clause: First Article Approval—Contractor Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-3 - First Article Approval-Contractor Testing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 2 2012-10-01 2012-10-01 false First Article Approval... Clauses 52.209-3 First Article Approval—Contractor Testing. As prescribed in 9.308-1 (a) and (b), insert the following clause: First Article Approval—Contractor Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-4 - First Article Approval-Government Testing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false First Article Approval... Clauses 52.209-4 First Article Approval—Government Testing. As prescribed in 9.308-2 (a) and (b), insert the following clause: First Article Approval—Government Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-3 - First Article Approval-Contractor Testing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 2 2013-10-01 2013-10-01 false First Article Approval... Clauses 52.209-3 First Article Approval—Contractor Testing. As prescribed in 9.308-1 (a) and (b), insert the following clause: First Article Approval—Contractor Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-3 - First Article Approval-Contractor Testing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false First Article Approval... Clauses 52.209-3 First Article Approval—Contractor Testing. As prescribed in 9.308-1 (a) and (b), insert the following clause: First Article Approval—Contractor Testing (SEP 1989) [Contracting Officer shall...

Testing Orr's document delivery test on biomedical journals in South Africa.

PubMed Central

Steynberg, S; Rossouw, S F

1995-01-01

This paper describes the use of a document delivery test (DDT) to measure the availability of biomedical research journals in South African health sciences libraries. The methodology employed was developed twenty years ago by a team of researchers from the Institute for the Advancement of Medical Communication under the direction of R. H. Orr. The testing of the methodology was in itself an objective of the present research. A citation pool consisting of 307 items was constructed from references to journal articles in papers published in 1989 by South African biomedical researchers. The availability of each article was determined at each of seven medical library sites; the performance was measured and presented as an arithmetical value or document delivery capability index (CI). The results of the tests show a high level of availability, ranging from CI = 81.68 to CI = 92.97 for the journals sampled. The DDT methodology was found to be practical, applicable to such studies, and flexible. Its use is recommended for similar studies. Images PMID:7703944

Protective Skins for Composite Airliners

NASA Technical Reports Server (NTRS)

Johnson, Vicki S.; Boone, Richard L.; Jones, Shannon; Pendse, Vandana; Hayward, Greg

2014-01-01

Traditional composite aircraft structures are designed for load bearing and then overdesigned for impact damage and hot humid environments. Seeking revolutionary improvement in the performance and weight of composite structures, Cessna Aircraft Company, with sponsorship from the NASA Fundamental Aeronautics Program/Subsonic Fixed Wing Project, has developed and tested a protective skin concept which would allow the primary composite structure to carry only load and would meet the impact, hot and humid, and other requirements through protective skins. A key requirement for the protective skins is to make any impact damage requiring repair visible. Testing from the first generation of skins helped identify the most promising materials which were used in a second generation of test articles. This report summarizes lessons learned from the first generation of protective skins, the design and construction of the second-generation test articles, test results from the second generation for impact, electromagnetic effects, aesthetics and smoothing, thermal, and acoustic (for the first time), and an assessment of the feasibility of the protective skin concept.

Development of a Post-Installed Deepwater Monitoring System

NASA Technical Reports Server (NTRS)

Seaman, C.; Brower, D. V.; Tang, H.; Le, S.

2015-01-01

A monitoring system that can be deployed on already existing deep water risers and flowlines has been developed. This paper describes the design concepts and testing that was performed in developing the monitoring system. A major challenge of a post-installed instrumentation system is to ensure adequate coupling is achieved between the instruments and the riser or flowline. This work investigates the sensor coupling for pipelines that are suspended in both the water column (from topside platform to the seabed) and for those that are located directly on the seabed. These different environments have resulted in two sensor attachment methods: (1) subsea adhesive sensor clamp design and (2) a friction surface sensor attachment method. This paper presents the adhesive attachment method. The monitoring elements consist of fiber optic sensors that are encased in a polyurethane clamp. With a subsea adhesive, the clamp can be installed by divers in shallow depths or by use of an ROV for deeper applications. The NASA Johnson Space Center was initially involved in the selection and testing of subsea adhesives. It was determined that up to 75 percent of the bonding strength could be achieved with the adhesive from optimal dry bonding versus bonding in submerged sea water environments. The next phase of the study involved the design, fabrication, and testing of several prototype clamps that contained the fiber optic sensors. A mold was produced by NASA using 3-D printing methods that allowed the fabrication of subscale test articles that would accommodate 4-inch and 8-inch diameter pipes. The clamps were installed with adhesive in a "wet" environment on the pipe test articles and tested in the NASA Structures Test Laboratory. The tension/compression and bending tests showed that the prototype sensor clamps achieved good coupling, and could provide high quality strain measurement for active monitoring.

Space shuttle development Motor No. 9 (DM-9), volume 1

NASA Technical Reports Server (NTRS)

Garecht, Diane M.

1990-01-01

The results obtained during the December 23, 1987 static firing of the DM-9 test article are presented. The DM-9 full-scale static test article employed redesigned solid rocket motor (RSRM) field joint capture feature hardware with J-seal insulation configuration, and nozzle-to-case joint radial bolt design with bonded insulation configuration. The nozzle incorporated RSRM components, including a thicker cowl with involuted outer boot ring. The nozzle employed redundant and verifiable seals in all five joints, and room temperature vulcanization backfill in three joints. With very few exceptions, the DM-9 test article was flight configuration. The test was conducted under extreme weather conditions: temperature of 25 F and wind at 15 to 20 mph. Ballistics performance values were within specification requirements. The RSRM field joint (J-seal) insulation configuration functioned as predicted with no indication of hot gases reaching the capture feature O-rings. There was a blowhole in the polysulfide adhesive in the nozzle-to-case joint, but no evidence of hot gases past the wiper O-ring. Nozzle design changes appeared to perform nominally, with the exception of the outer boot ring, which suffered partial structural breakup late in the test. Field joint heaters maintained the controlling resistance temperature device temperature within the specified requirements during heater operation. The thrust vector control system operated properly. The redesigned water deluge system, temperature conditioning equipment, and other test support equipment performed as planned.

Dual-axis resonance testing of wind turbine blades

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, Scott; Musial, Walter; White, Darris

An apparatus (100) for fatigue testing test articles (104) including wind turbine blades. The apparatus (100) includes a test stand (110) that rigidly supports an end (106) of the test article (104). An actuator assembly (120) is attached to the test article (104) and is adapted for substantially concurrently imparting first and second forcing functions in first and second directions on the test article (104), with the first and second directions being perpendicular to a longitudinal axis. A controller (130) transmits first and second sets of displacement signals (160, 164) to the actuator assembly (120) at two resonant frequencies ofmore » the test system (104). The displacement signals (160, 164) initiate the actuator assembly (120) to impart the forcing loads to concurrently oscillate the test article (104) in the first and second directions. With turbine blades, the blades (104) are resonant tested concurrently for fatigue in the flapwise and edgewise directions.« less

Antenna Test Facility (ATF): User Test Planning Guide

NASA Technical Reports Server (NTRS)

Lin, Greg

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the ATF. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Radiant Heat Test Facility (RHTF): User Test Planning Guide

NASA Technical Reports Server (NTRS)

DelPapa, Steven

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the RHTF. The User Test Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Electronic Systems Test Laboratory (ESTL) User Test Planning Guide

NASA Technical Reports Server (NTRS)

Robinson, Neil

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the ESTL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Structures Test Laboratory (STL). User Test Planning Guide

NASA Technical Reports Server (NTRS)

Zipay, John J.

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the STL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Finite Element Analysis and Test Results Comparison for the Hybrid Wing Body Center Section Test Article

NASA Technical Reports Server (NTRS)

Przekop, Adam; Jegley, Dawn C.; Rouse, Marshall; Lovejoy, Andrew E.

2016-01-01

This report documents the comparison of test measurements and predictive finite element analysis results for a hybrid wing body center section test article. The testing and analysis efforts were part of the Airframe Technology subproject within the NASA Environmentally Responsible Aviation project. Test results include full field displacement measurements obtained from digital image correlation systems and discrete strain measurements obtained using both unidirectional and rosette resistive gauges. Most significant results are presented for the critical five load cases exercised during the test. Final test to failure after inflicting severe damage to the test article is also documented. Overall, good comparison between predicted and actual behavior of the test article is found.

Near minimum-time maneuvers of the advanced space structures technology research experiment (ASTREX) test article: Theory and experiments

NASA Technical Reports Server (NTRS)

Vadali, Srinivas R.; Carter, Michael T.

1994-01-01

The Phillips Laboratory at the Edwards Air Force Base has developed the Advanced Space Structures Technology Research Experiment (ASTREX) facility to serve as a testbed for demonstrating the applicability of proven theories to the challenges of spacecraft maneuvers and structural control. This report describes the work performed on the ASTREX test article by Texas A&M University under contract NAS119373 as a part of the Control-Structure Interaction (CSI) Guest Investigator Program. The focus of this work is on maneuvering the ASTREX test article with compressed air thrusters that can be throttled, while attenuating structural excitation. The theoretical foundation for designing the near minimum-time thrust commands is based on the generation of smooth, parameterized optimal open-loop control profiles, and the determination of control laws for final position regulation and tracking using Lyapunov stability theory. Details of the theory, mathematical modeling, model updating, and compensation for the presence of 'real world' effects are described and the experimental results are presented. The results show an excellent match between theory and experiments.

Pursuing the Qualities of a "Good" Test

ERIC Educational Resources Information Center

Coniam, David

2014-01-01

This article examines the issue of the quality of teacher-produced tests, limiting itself in the current context to objective, multiple-choice tests. The article investigates a short, two-part 20-item English language test. After a brief overview of the key test qualities of reliability and validity, the article examines the two subtests in terms…

The challenge of cross-cultural assessment--The Test of Ability To Explain for Zulu-speaking Children.

PubMed

Solarsh, Barbara; Alant, Erna

2006-01-01

A culturally appropriate test, The Test of Ability To Explain for Zulu-speaking Children (TATE-ZC), was developed to measure verbal problem solving skills of rural, Zulu-speaking, primary school children. Principles of 'non-biased' assessment, as well as emic (culture specific) and etic (universal) aspects of intelligence formed the theoretical backdrop. In addition, specific principles relating to test translation; test content; culturally appropriate stimulus material; scoring procedures and test administration were applied. Five categories of abstract thinking skills formed the basis of the TATE-ZC. These were: (a) Explaining Inferences, (b) Determining Cause, (c) Negative Why Questions, (d) Determining Solutions and (e) Avoiding Problem. The process of test development underwent three pilot studies. Results indicate that the TATE-ZC is a reliable and valid test for the target population. A critical analysis of the efficacy of creating a test of verbal reasoning for children from the developing world concludes the article. As a result of this activity (1) the participant will have a clearer understanding of the principles that need to be followed when developing culturally appropriate test material; (2) the participant will understand the process of developing culturally appropriate test material for non-mainstream cultures; (3) the participant will be able to apply the process and principles to other cross-cultural testing situations.

Cybernetics and Education (Special Issue)

ERIC Educational Resources Information Center

Kopstein, Felix F., Ed.

1977-01-01

This is a special issue examining the potential of cybernetics in educational technology. Articles discuss: cybernetic methods, algorithms, feedback learning theory, a structural approach to behavioral objectives and criterion-referenced testing, task specifications and diagnosis, teacher-child interaction, educational development, teaching…

Espace

ERIC Educational Resources Information Center

De Volder, Maurice; Slootmaker, Aad; Kurvers, Hub; Rutjens, Marjo; van der Baaren, John; Bitter, Marlies; Kappe, Rutger; Roossink, Henk; de Goeijen, Jan; Reitzema, Hans

2007-01-01

This article describes Espace (Electronic System for Peer Assessment and Coaching Efficiency), a student peer-feedback tool that enhances the educational quality of assignments without overburdening faculty or adding administrative costs. Developed and tested by four universities in the Netherlands, Espace focuses on qualitative feedback and…

Children's language development after cochlear implantation: a literature review.

PubMed

Monteiro, Clarice Gomes; Cordeiro, Ana Augusta de Andrade; Silva, Hilton Justino da; Queiroga, Bianca Arruda Manchester de

2016-01-01

review the literature for studies that describe the language development of children after they receive cochlear implants. Literature review on the PubMed, Web of Science, Scopus, and Science Direct databases, tracing the selection and critical analysis stages in the journals found and selected. We selected original articles looking at children with cochlear implants, which mentioned language development after surgery. Case studies, dissertations, books chapters, editorials, and original articles that did not mention aspects of oral communication development, perception of sounds and speech, and other stages of human development, in the title, abstract, or text, were excluded. A protocol was created for this study including the following points: author, year, location, sample, type of study, objectives, methods used, main results, and conclusion. 5,052 articles were found based on the search descriptors and free terms. Of this total, 3,414 were excluded due to the title, 1,245 due to the abstract, and 358 from reading the full text; we selected 35, of which 28 were repeated. In the end, seven articles were analyzed in this review. We conclude that cochlear implant users have slower linguistic and educational development than their peers with normal hearing - though they are better than conventional prostheses users - and they are able to match them over time. There is great variability in the test methodologies, thus reducing the effectiveness and reliability of the results found.

Development and test of a model for designing interactive CD-ROMs for teaching nursing skills.

PubMed

Jeffries, P R

2000-01-01

The use of interactive multimedia is well documented in the education literature as a medium for learning. Many schools of nursing and healthcare agencies purchase commercially-made CD-ROM products, and, in other cases, educators develop their own. Since nurses are increasingly designing CD-ROMs, they must be aware of the instructional design needed to develop comprehensive and effective CD-ROMs that do not compromise the quality of education. This article describes a process for developing and testing an interactive, multimedia CD-ROM on oral medication administration, using an instructional design model based on Chickering and Gamson's Principles of Good Practices in Education. Results from testing the model are reported. The findings can be used to guide the work of nurse educators who are interested in developing educational software.

Recent developments in health care law: partners in innovation.

PubMed

Berry, Roberta M; Bliss, Lisa; Caley, Sylvia; Lombardo, Paul A; Rooker, Jerri Nims; Todres, Jonathan; Wolf, Leslie E

2010-06-01

This article reviews recent developments in health care law, focusing on the engagement of law as a partner in health care innovation. The article addresses: the history and contents of recent United States federal law restricting the use of genetic information by insurers and employers; the recent federal policy recommending routine HIV testing; the recent revision of federal policy regarding the funding of human embryonic stem cell research; the history, current status, and need for future attention to advance directives; the recent emergence of medical-legal partnerships and their benefits for patients; the obesity epidemic and its implications for the child's right to health under international conventions.

[Symptoms diagnosis and treatment of dyscalulia].

PubMed

Ise, Elena; Schulte-Körne, Gerd

2013-07-01

Children with dyscalculia show deficits in basic numerical processing which cause difficulties in the acquisition of mathematical skills. This article provides an overview of current research findings regarding the symptoms, cause, and prognosis of dyscalculia, and it summarizes recent developments in the diagnosis, early intervention, and treatment thereof. Diagnosis has improved recently because newly developed tests focus not only on the math curriculum, but also on basic skills found to be impaired in dyscalculia. A controversial debate continues with regard to IQ achievement discrepancy. International studies have demonstrated the effectiveness of specialized interventions. This article summarizes the research findings from intervention studies, describes different treatment approaches, and discusses implications for clinical practice.

Heater Development, Fabrication, and Testing: Analysis of Fabricated Heaters

NASA Technical Reports Server (NTRS)

Bragg-Sitton, S. M.; Dickens, R. E.; Farmer, J. T.; Davis, J. D.; Adams, M. R.; Martin, J. J.; Webster, K. L.

2008-01-01

Thermal simulators (highly designed heater elements) developed at the Early Flight Fission Test Facility (EFF-TF) are used to simulate the heat from nuclear fission in a variety of reactor concepts. When inserted into the reactor geometry, the purpose of the thermal simulators is to deliver thermal power to the test article in the same fashion as if nuclear fuel were present. Considerable effort has been expended to mimic heat from fission as closely as possible. To accurately represent the fuel, the simulators should be capable of matching the overall properties of the nuclear fuel rather than simply matching the fuel temperatures. This includes matching thermal stresses in the pin, pin conductivities, total core power, and core power profile (axial and radial). This Technical Memorandum discusses the historical development of the thermal simulators used in nonnuclear testing at the EFF-TF and provides a basis for the development of the current series of thermal simulators. The status of current heater fabrication and testing is assessed, providing data and analyses for both successes and failures experienced in the heater development and testing program.

Development of the Faith Activities in the Home Scale (FAITHS)

ERIC Educational Resources Information Center

Lambert, Nathaniel M.; Dollahite, David C.

2010-01-01

This article reports the development of the Faith Activities In The Home Scale (FAITHS). The initial FAITHS measure was improved on and expanded by using qualitative data of two separate samples and then empirically tested on three separate samples. Study 1 comprised two samples totaling 57 highly religious families from New England and California…

Automated Scoring of Short-Answer Reading Items: Implications for Constructs

ERIC Educational Resources Information Center

Carr, Nathan T.; Xi, Xiaoming

2010-01-01

This article examines how the use of automated scoring procedures for short-answer reading tasks can affect the constructs being assessed. In particular, it highlights ways in which the development of scoring algorithms intended to apply the criteria used by human raters can lead test developers to reexamine and even refine the constructs they…

Using Action Learning to Support Individual and Organisational Reflection in an International Development and Relief Agency

ERIC Educational Resources Information Center

Wright, Nick

2004-01-01

The dramatic rise in popularity of action learning (AL) over recent years has provided opportunity and impetus for various applications of this approach to be developed and tested in practice. This article describes one organisation's experience of AL, demonstrating that it can be effective in terms of stimulating and supporting reflective…

Wireless Network for Measurement of Whole-Body Vibration

PubMed Central

Koenig, Diogo; Chiaramonte, Marilda S.; Balbinot, Alexandre

2008-01-01

This article presents the development of a system integrated to a ZigBee network to measure whole-body vibration. The developed system allows distinguishing human vibrations of almost 400Hz in three axes with acceleration of almost 50g. The tests conducted in the study ensured the correct functioning of the system for the project's purpose. PMID:27879866

Socio-Economic Status and Early Childhood Cognitive Skills: A Mediation Analysis Using the Young Lives Panel

ERIC Educational Resources Information Center

Lopez Boo, Florencia

2016-01-01

This article documents differences in cognitive development, as measured by the Peabody Picture Vocabulary Test (PPVT), between children from households with high and low socioeconomic status (SES) in two different phases of early childhood in four developing countries. A large number of potential mediators, such as urban residence, preschool…

The Historical Development of Evaluation Use

ERIC Educational Resources Information Center

Alkin, Marvin C.; King, Jean A.

2016-01-01

The first article in this series traces the initial development of the concept of evaluation use. As a field, evaluation has always paid attention to the potential for use, both in decision-making and in changing people's thinking. The broad history of the field as we know it today stemmed from two streams: one focused on tests and measurement,…

Assessing and Comparing Physical Environments for Nursing Home Residents: Using New Tools for Greater Research Specificity

ERIC Educational Resources Information Center

Cutler, Lois J.; Kane, Rosalie A.; Degenholtz, Howard B.; Miller, Michael J.; Grant, Leslie

2006-01-01

Purpose: We developed and tested theoretically derived procedures to observe physical environments experienced by nursing home residents at three nested levels: their rooms, the nursing unit, and the overall facility. Illustrating with selected descriptive results, in this article we discuss the development of the approach. Design and Methods: On…

Development Communication Report, 1990/1-4, Nos. 68-71.

ERIC Educational Resources Information Center

Development Communication Report, 1990

1990-01-01

The four issues of this newsletter focus primarily on the use of communication technologies in developing nations to educate their people. The first issue (No. 68) contains a review of the current status of adult literacy worldwide and articles on an adult literacy program in Nepal; adult new readers as authors; testing literacy materials; the use…

Development of a Computerized In-Basket Exercise for the Classroom: A Sales Management Example

ERIC Educational Resources Information Center

Pearson, Michael M.; Barnes, John W.; Onken, Marina H.

2006-01-01

This article follows the development of a sales management in-basket exercise for use in the classroom. The authors have computerized the exercise and added features to allow for additional and more quantitative input from the students. The exercise has evolved and been tested in numerous classroom situations. The computerized in-basket exercise…

Researching Travel Behavior and Adaptability: Using a Virtual Reality Role-Playing Game

ERIC Educational Resources Information Center

Watcharasukarn, Montira; Krumdieck, Susan; Green, Richard; Dantas, Andre

2011-01-01

This article describes a virtual reality role-playing game that was developed as a survey tool to collect travel behavior data and explore and monitor travel behavior adaptation. The Advanced Energy and Material Systems Laboratory has designed, developed a prototype, and tested such a game platform survey tool, called Travel Activity Constraint…

Severity Indices of Personality Problems (SIPP-118): Development, Factor Structure, Reliability, and Validity

ERIC Educational Resources Information Center

Verheul, Roel; Andrea, Helene; Berghout, Caspar C.; Dolan, Conor; Busschbach, Jan J. V.; van der Kroft, Petra J. A.; Bateman, Anthony W.; Fonagy, Peter

2008-01-01

This article describes a series of studies involving 2,730 participants on the development and validity testing of the Severity Indices of Personality Problems (SIPP), a self-report questionnaire covering important core components of (mal)adaptive personality functioning. Results show that the 16 facets constituted homogeneous item clusters (i.e.,…

Usability Tests in CALL Development: Pilot Studies in the Context of the Dire autrement and Francotoile Projects

ERIC Educational Resources Information Center

Hamel, Marie-Josee; Caws, Catherine

2010-01-01

This article discusses CALL development from both educational and ergonomic perspectives. It focuses on the learner-task-tool interaction, in particular on the aspects contributing to its overall quality, herein called "usability." Two pilot studies are described that were carried out with intermediate to advanced learners of French in two…

Enumerating Cubes in 3-D Arrays: Students' Strategies and Instructional Progress.

ERIC Educational Resources Information Center

Battista, Michael T.; Clements, Douglas H.

This investigation is part of a combined research/curriculum development project in which children's learning is being examined in the context of developing and testing instructional units on 3-D geometry in grades 3, 4, and 5. There are two components to the article. First, the strategies and cognitive constructions that students utilize to…

How Effective Is the Research and Development Ecosystem for England's Schools?

ERIC Educational Resources Information Center

Godfrey, David; Brown, Chris

2018-01-01

This article examines the role of research and development within England's school system. From a range of literature past and present we argue that six features (three dimensions) should form the focus for action at the institutional, systemic and policy levels. Applying these stress tests to the current system, we suggest that an effective…

The Impact of a Professional Development Programme on the Practices and Beliefs of Numeracy Teachers

ERIC Educational Resources Information Center

Swan, Malcolm; Swain, Jon

2010-01-01

This article describes some outcomes of a nine-month design-based research study into the professional development of 24 numeracy teachers with post-16 learners. Teachers analysed research-based principles for teaching, and engaged in a design-research process by testing and refining teaching activities to embody these principles. Data from…

Contact Thermocouple Methodology and Evaluation for Temperature Measurement in the Laboratory

NASA Technical Reports Server (NTRS)

Brewer, Ethan J.; Pawlik, Ralph J.; Krause, David L.

2013-01-01

Laboratory testing of advanced aerospace components very often requires highly accurate temperature measurement and control devices, as well as methods to precisely analyze and predict the performance of such components. Analysis of test articles depends on accurate measurements of temperature across the specimen. Where possible, this task is accomplished using many thermocouples welded directly to the test specimen, which can produce results with great precision. However, it is known that thermocouple spot welds can initiate deleterious cracks in some materials, prohibiting the use of welded thermocouples. Such is the case for the nickel-based superalloy MarM-247, which is used in the high temperature, high pressure heater heads for the Advanced Stirling Converter component of the Advanced Stirling Radioisotope Generator space power system. To overcome this limitation, a method was developed that uses small diameter contact thermocouples to measure the temperature of heater head test articles with the same level of accuracy as welded thermocouples. This paper includes a brief introduction and a background describing the circumstances that compelled the development of the contact thermocouple measurement method. Next, the paper describes studies performed on contact thermocouple readings to determine the accuracy of results. It continues on to describe in detail the developed measurement method and the evaluation of results produced. A further study that evaluates the performance of different measurement output devices is also described. Finally, a brief conclusion and summary of results is provided.

RETRACTED: Development of a cryogenic test bed for high amperage critical current measurement on high temperature superconductor wire

NASA Astrophysics Data System (ADS)

Wang, Qiuliang; Dai, Yinming; Zhao, Baozhi; Song, Souseng; Chen, Shunzhong; Yan, Luguang

2009-06-01

This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editors. The article duplicates significant parts of a paper that had already appeared in IEEE TASC, VOL. 18 (2008) 548-551. 10.1109/TASC.2008.921295. One of the conditions of submission of a paper for publication is that authors declare explicitly that the paper is not under consideration for publication elsewhere. Re-use of any data should be appropriately cited. As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process.

Orion EFT-1 Heat Shield Offload from Truck onto Foam Pads (Dunna

NASA Image and Video Library

2017-04-27

The Orion heat shield from Exploration Flight Test-1 has arrived in High Bay 2 of the Vehicle Assembly Building (VAB) at NASA's Kennedy Space Center in Florida. The heat shield is being transferred from the Orion Program to the Ground Systems Development and Operations Program, Landing and Recovery Operations. In the VAB, the heat shield will be integrated with the Orion ground test article and used for future underway recovery testing.

Orion EFT-1 Heat Shield Offload from Truck onto Foam Pads (Dunna

NASA Image and Video Library

2017-04-27

Inside High Bay 2 in the Vehicle Assembly Building (VAB) at NASA's Kennedy Space Center in Florida, the Orion heat shield from Exploration Flight Test-1 is secured on foam blocks. The heat shield is being transferred from the Orion Program to the Ground Systems Development and Operations Program, Landing and Recovery Operations. In the VAB, the heat shield will be integrated with the Orion ground test article and used for future underway recovery testing.

Prenatal screening: current practice, new developments, ethical challenges.

PubMed

de Jong, Antina; Maya, Idit; van Lith, Jan M M

2015-01-01

Prenatal screening pathways, as nowadays offered in most Western countries consist of similar tests. First, a risk-assessment test for major aneuploides is offered to pregnant women. In case of an increased risk, invasive diagnostic tests, entailing a miscarriage risk, are offered. For decades, only conventional karyotyping was used for final diagnosis. Moreover, several foetal ultrasound scans are offered to detect major congenital anomalies, but the same scans also provide relevant information for optimal support of the pregnancy and the delivery. Recent developments in prenatal screening include the application of microarrays that allow for identifying a much broader range of abnomalities than karyotyping, and non-invasive prenatal testing (NIPT) that enables reducing the number of invasive tests for aneuploidies considerably. In the future, broad NIPT may become possible and affordable. This article will briefly address the ethical issues raised by these technological developments. First, a safe NIPT may lead to routinisation and as such challenge the central issue of informed consent and the aim of prenatal screening: to offer opportunity for autonomous reproductive choice. Widening the scope of prenatal screening also raises the question to what extent 'reproductive autonomy' is meant to expand. Finally, if the same test is used for two different aims, namely detection of foetal anomalies and pregnancy-related problems, non-directive counselling can no longer be taken as a standard. Our broad outline of the ethical issues is meant as an introduction into the more detailed ethical discussions about prenatal screening in the other articles of this special issue. © 2014 John Wiley & Sons Ltd.

Imparting Barely Visible Impact Damage to a Stitched Composite Large-Scale Pressure Box

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.; Przekop, Adam

2016-01-01

The Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) is a concept that was developed by The Boeing Company to address the complex structural design aspects associated with a pressurized hybrid wing body (HWB) aircraft configuration, which has been a focus of the NASA Environmentally Responsible Aviation Project. The NASA-Boeing structural development for the HWB aircraft culminated in testing of the multi-bay box, which is an 80%-scale representation of the pressurized center-body section. This structure was tested in the NASA Langley Research Center Combined Loads Test System facility. As part of this testing, barely visible impact damage was imparted to the interior and exterior of the test article to demonstrate compliance with a condition representative of the requirements for Category 1 damaged composite structure as defined by the Federal Aviation Regulations. Interior impacts were imparted using an existing spring-loaded impactor, while the exterior impacts were imparted using a newly designed, gravity-driven impactor. This paper describes the impacts to the test article, and the design of the gravitydriven guided-weight impactor. The guided-weight impactor proved to be a very reliable method to impart barely visible impact damage in locations which are not easily accessible for a traditional drop-weight impactor, while at the same time having the capability to be highly configurable for use on other aircraft structures.