Developing Learner Autonomy through Project Work in an ESP Class

ERIC Educational Resources Information Center

Díaz Ramírez, Martha Isabel

2014-01-01

This article presents the findings of an action research study on developing learner autonomy through project work in an English for Specific Purposes class. The study was conducted at a Colombian regional and public university with environmental engineering undergraduates. The instruments for data collection were field notes, semi-structured…

Developing Adaptive Behavior and Work Skills in Severely Retarded Young Adults.

ERIC Educational Resources Information Center

Fenning, Jerome M.; McBee, Edwin D.

The Pacific State Hospital conducted a demonstration experiment with 12 severely and profoundly mentally retarded male adolescents, which concentrated on modifying disruptive, bothersome behaviors while developing basic work skills required for daily activity in sheltered workshops. The experiment provided an integrated program for an entire day,…

20 CFR 669.370 - What intensive services may be provided to eligible MSFW's?

Code of Federal Regulations, 2010 CFR

2010-04-01

... activities; (2) Allowance payments; (3) Work experience, which: (i) Is designed to promote the development of good work habits and basic work skills at the work-site (work experience may be conducted with the public and private non-profit sectors and with the private for-profit sector when the design for this...

Working as an Electronics Engineer at NASA Dryden

NASA Technical Reports Server (NTRS)

Chan, Patrick

2011-01-01

This is a general presentation of fiber optics instrumentation development work being conducted at NASA Dryden for the past 10 years and recent achievements in the field of fiber optics strain sensors.

Solar Technology Validation Project - USS Data, LLC: Cooperative Research and Development Final Report, CRADA Number CRD-09-367-04

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilcox, S.

2013-08-01

Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

Solar Technology Validation Project - RES Americas: Cooperative Research and Development Final Report, CRADA Number CRD-09-367-11

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilcox, S.

Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

The Work Tasks Motivation Scale for Teachers (WTMST)

ERIC Educational Resources Information Center

Fernet, Claude; Senecal, Caroline; Guay, Frederic; Marsh, Herbert; Dowson, Martin

2008-01-01

The authors developed and validated a measure of teachers' motivation toward specific work tasks: The Work Tasks Motivation Scale for Teachers (WTMST). The WTMST is designed to assess five motivational constructs toward six work tasks (e.g., class preparation, teaching). The authors conducted a preliminary (n = 42) and a main study among…

Teaching Note--Ask the Audience: Using Student Response Systems in Social Work Education

ERIC Educational Resources Information Center

Friedline, Terri; Mann, Aaron R.; Lieberman, Alice

2013-01-01

Social work educators are uniquely tasked with balancing content while helping students evaluate personal biases and develop ethical conduct necessary for social work professionalism. Social work education may benefit from technology like Student Response Systems (SRS) that allow educators to pose questions on sensitive topics in real time while…

Diversity in the Work Force. The Highlight Zone: Research @ Work No. 4.

ERIC Educational Resources Information Center

Wentling, Rose Mary

A literature review was conducted to identify critical work force diversity issues in today's changing workplace and identify ways organizations and career and technical education (CTE) practitioners can increase work force diversity. A broad, all-inclusive definition of diversity was developed that focuses on how diversity affects individuals and…

The Process and the Product: Two English Classes Develop Materials.

ERIC Educational Resources Information Center

Nettle, Mary Ellen

1982-01-01

English classes conducted for two groups of women, garment factory workers and building cleaners, are compared. The garment workers interviewed each other and produced a slide-tape program. The cleaners produced a song about their work and in the process, developed awareness of the work situation, and a sense of cooperation. (MSE)

Working Memory and Language: Skill-Specific or Domain-General Relations to Mathematics?

ERIC Educational Resources Information Center

Purpura, David J.; Ganley, Colleen M.

2014-01-01

Children's early mathematics skills develop in a cumulative fashion; foundational skills form a basis for the acquisition of later skills. However, non-mathematical factors such as working memory and language skills have also been linked to mathematical development at a broad level. Unfortunately, little research has been conducted to evaluate the…

A Completed Research and Development Work Project in School: The Teachers' Learning and Possibilities, Premises and Challenges for Further Development

ERIC Educational Resources Information Center

Postholm, May Britt

2011-01-01

The article is based on a follow-up study of a research and development work project with school leaders and teachers conducted in a Norwegian lower secondary school. The purpose is to present an understanding of "what the practitioners find they have learned" during the project and "how they experience the situation with regard to…

Influence of backup bearings and support structure dynamics on the behavior of rotors with active supports

NASA Technical Reports Server (NTRS)

Flowers, George T.

1994-01-01

Progress over the past year includes the following: A simplified rotor model with a flexible shaft and backup bearings has been developed. A simple rotor model which includes a flexible disk and bearings with clearance has been developed and the dynamics of the model investigated. A rotor model based upon the T-501 engine has been developed which includes backup bearing effects. Parallel simulation runs are being conducted using an ANSYS based finite element model of the T-501. The magnetic bearing test rig is currently floating and dynamics/control tests are being conducted. A paper has been written that documents the work using the T-501 engine model. Work has continued with the simplified model. The finite element model is currently being modified to include the effects of foundation dynamics. A literature search for material on foil bearings has been conducted. A finite element model is being developed for a magnetic bearing in series with a foil backup bearing.

A new practice environment measure based on the reality and experiences of nurses working lives.

PubMed

Webster, Joan; Flint, Anndrea; Courtney, Mary

2009-01-01

To explore the underlying organizational issues affecting a nurses' decision to leave and to develop a contemporary practice environment measure based on the experiences of nurses working lives. Turnover had reached an unacceptable level in our organization but underlying reasons for leaving were unknown. In-depth interviews were conducted with 13 nurses who had resigned. Transcripts were analysed using the constant comparative method. Information from the interviews informed the development a new practice environment tool, which has undergone initial testing using the Content Validity Index and Chronbach's alpha. Two domains ('work life' and 'personal life/professional development') and five themes ('feeling safe', 'feeling valued', 'getting things done', 'professional development' and 'being flexible') emerged from the interviews. A content validity score for the new instrument was 0.79 and Chronbach's alpha 0.93. The new practice environment tool has shown useful initial reliability and validity but requires wider testing in other settings. The reality and experiences of nurses working lives can be identified through exit interviews conducted by an independent person. Information from such interviews is useful in identifying an organization's strength and weaknesses and to develop initiatives to support retention.

Influence of backup bearings and support structure dynamics on the behavior of rotors with active supports

NASA Technical Reports Server (NTRS)

Flowers, George T.

1994-01-01

Substantial progress has been made toward the goals of this research effort in the past six months. A simplified rotor model with a flexible shaft and backup bearings has been developed. The model is based upon the work of Ishii and Kirk. Parameter studies of the behavior of this model are currently being conducted. A simple rotor model which includes a flexible disk and bearings with clearance has been developed and the dynamics of the model investigated. The study consists of simulation work coupled with experimental verification. The work is documented in the attached paper. A rotor model based upon the T-501 engine has been developed which includes backup bearing effects. The dynamics of this model are currently being studied with the objective of verifying the conclusions obtained from the simpler models. Parallel simulation runs are being conducted using an ANSYS based finite element model of the T-501.

Social Work Education and Police in Papua New Guinea

ERIC Educational Resources Information Center

Lovai, Betty

2007-01-01

The contribution of social work education to the professional capacity development of police officers commenced in 1974 when the Diploma in Police Studies was introduced at the University of Papua New Guinea under the Social Work Programme. In 2001, a study was conducted to assess the impact of social work education on police officers. The study…

Fiber Optics Instrumentation Development

NASA Technical Reports Server (NTRS)

Chan, Patrick Hon Man; Parker, Allen R., Jr.; Richards, W. Lance

2010-01-01

This is a general presentation of fiber optics instrumentation development work being conducted at NASA Dryden for the past 10 years and recent achievements in the field of fiber optics strain sensors.

States, Earth Science, and Decision-Making: Five Years of Lessons Learned by the NASA DEVELOP National Program Working with a State Government

NASA Astrophysics Data System (ADS)

Favors, J.; Ruiz, M. L.; Rogers, L.; Ross, K. W.; Childs-Gleason, L. M.; Allsbrook, K. N.

2017-12-01

Over a five-year period that spanned two administrations, NASA's DEVELOP National Program engaged in a partnership with the Government of the Commonwealth of Virginia to explore the use of Earth observations in state-level decision making. The partnership conducted multiple applied remote sensing projects with DEVELOP and utilized a shared-space approach, where the Virginia Governor's Office hosted NASA DEVELOP participants to mature the partnership and explore additional science opportunities in the Commonwealth. This presentation will provide an overview of various lessons learned from working in an administrative and policy environment, fostering the use of science in such an environment, and building substantive relationships with non-technical partners. An overview of the projects conducted in this partnership will provide an opportunity to explore specific best practices that enhanced the work and provide tips to enhance the potential for success for other science and technology organizations considering similar partnerships.

Eddy current spectroscopy for near-surface residual stress profiling in surface treated nonmagnetic engine alloys

NASA Astrophysics Data System (ADS)

Abu-Nabah, Bassam A.

Recent research results indicated that eddy current conductivity measurements can be exploited for nondestructive evaluation of near-surface residual stresses in surface-treated nickel-base superalloy components. Most of the previous experimental studies were conducted on highly peened (Almen 10-16A) specimens that exhibit harmful cold work in excess of 30% plastic strain. Such high level of cold work causes thermo-mechanical relaxation at relatively modest operational temperatures; therefore the obtained results were not directly relevant to engine manufacturers and end users. The main reason for choosing peening intensities in excess of recommended normal levels was that in low-conductivity engine alloys the eddy current penetration depth could not be forced below 0.2 mm without expanding the measurements above 10 MHz which is beyond the operational range of most commercial eddy current instruments. As for shot-peened components, it was initially felt that the residual stress effect was more difficult to separate from cold work, texture, and inhomogeneity effects in titanium alloys than in nickel-base superalloys. In addition, titanium alloys have almost 50% lower electric conductivity than nickel-base superalloys; therefore require proportionally higher inspection frequencies, which was not feasible until our recent breakthrough in instrument development. Our work has been focused on six main aspects of this continuing research, namely, (i) the development of an iterative inversion technique to better retrieve the depth-dependent conductivity profile from the measured frequency-dependent apparent eddy current conductivity (AECC), (ii) the extension of the frequency range up to 80 MHz to better capture the peak compressive residual stress in nickel-base superalloys using a new eddy current conductivity measuring system, which offers better reproducibility, accuracy and measurement speed than the previously used conventional systems, (iii) the lift-off effect on high frequency eddy current spectroscopy, (iv) the development of custom-made spiral coils to allow eddy current conductivity characterization over the whole frequency range of interest with reduced coil sensitivity to lift off, (v) the benefits of implementing a semi-quadratic system calibration in reducing the coil sensitivity to lift-off, and (vi) the feasibility of adapting high-frequency eddy current residual stress characterization for shot-peened titanium alloys.

Flight deck task management

DOT National Transportation Integrated Search

2016-12-21

This report documents the work undertaken in support of Volpe Task Order No. T0026, Flight Deck Task Management. The objectives of this work effort were to: : 1) Develop a specific and standard definition of task management (TM) : 2) Conduct a ...

The Development and Initial Validation of the Work Volition Scale-Student Version

ERIC Educational Resources Information Center

Duffy, Ryan D.; Diemer, Matthew A.; Jadidian, Alex

2012-01-01

The present study sought to develop and validate an instrument to measure work volition, defined as the perceived capacity to make occupational choices despite constraints, among college students. In Study 1, an exploratory factor analysis was conducted with a large and diverse sample of college students, finding a reliable scale with two factors,…

Conductive Education: Feasibility Study on Developing a National Curriculum Plan for Those Working in Conductive Education in New Zealand.

ERIC Educational Resources Information Center

Wagner, Graham A.

This study sought to determine whether there are national training needs among staff of conductive education programs in New Zealand. Conductive education is a unified system of education for children and adults with a motor disorder whose disability has been caused by damage to the central nervous system. The study, which focuses primarily on…

Organizational practices, work demands and the well-being of employees: a follow-up study in the metal industry and retail trade.

PubMed

Tuomi, Kaija; Vanhala, Sinikka; Nykyri, Erkki; Janhonen, Minna

2004-03-01

Rapid technological change and increased international competition have changed working life and work organizations. These changes may not be considered when researching employee work ability and well-being. This study investigates the impact of organizational practices, work demands and individual factors on work ability, organizational commitment and mental well-being of employees in the metal industry and retail trade. A follow-up study was conducted to examine these connections among 1389 employees (mean age 42 years at baseline) in 91 organizations. The first survey was conducted in 1998 and was repeated in 2000. Changes in organizational practices and the demands of work were strongly associated with changes in employee well-being. Work ability, organizational commitment and the mental well-being of employees were increased most if the opportunities for development and influence and the promotion of employee well-being were increased and if the supervisory support and organization of work were improved. Well-being also improved with less uncertainty at work and with decreasing mental and physical work demands. In addition physical exercise and affluence also had favourable effects. The results confirm that several features of organizational practices are strongly associated with employees' well-being. Organizational development is an important method of improving employees' work ability, commitment and well-being.

Raising Teachers' Voices: An In-Depth Qualitative Inquiry into Teachers' Working Conditions and Professional Development Needs in Khyber Pakhtunkhwa, a Province of Pakistan

ERIC Educational Resources Information Center

Ali, Takbir

2018-01-01

This study documented in detail teachers' voices about their working conditions, professional development needs and opportunities to cater to these needs. The study reported in this paper was conducted as part of a large-scale study that used mixed methods to assess teachers' professional development needs. The qualitative data reported in this…

A Comparative Test of Work-Family Conflict Models and Critical Examination of Work-Family Linkages

ERIC Educational Resources Information Center

Michel, Jesse S.; Mitchelson, Jacqueline K.; Kotrba, Lindsey M.; LeBreton, James M.; Baltes, Boris B.

2009-01-01

This paper is a comprehensive meta-analysis of over 20 years of work-family conflict research. A series of path analyses were conducted to compare and contrast existing work-family conflict models, as well as a new model we developed which integrates and synthesizes current work-family theory and research. This new model accounted for 40% of the…

Identity formation of occasional faculty developers in medical education: a qualitative study.

PubMed

O'Sullivan, Patricia S; Irby, David M

2014-11-01

Faculty developers play a crucial role in preparing faculty members for their instructional responsibilities. In some programs, faculty developers are clinicians and scientists who only occasionally conduct workshops. The authors examine the identity formation of such part-time faculty developers. From April 2012 through March 2012, structured interviews were conducted with full-time faculty members who, from 2007 to 2012, periodically volunteered to teach workshops in the University of California, San Francisco School of Medicine's faculty development program. This qualitative study used a modified grounded theory approach. The authors interviewed 29 occasional faculty developers who had 1 to 22 years of experience conducting faculty development programs. All faculty had an educator identity along with their professional identity. The additional faculty developer identity generally evolved over time and aligned with their identity in one of four ways: compartmentalized, hierarchical, parallel, or merged. Their roles as faculty developers enhanced their status in their work community and influenced the way they worked with others and advanced their careers. Faculty development influences the institutional culture, and the institutional culture supports faculty development. Most occasional faculty developers possessed a merged identity that developed over time and was moderated by the topic that they taught. Although experience contributed to this development, both junior and senior faculty developers could have a merged identity. Those who lead faculty development programs can use these findings to recruit and retain faculty developers.

Renal in-patient ward nurse experience and job satisfaction: A qualitative study.

PubMed

McKenzie, Aisha Tamika; Addis, Gulen

2018-06-13

The aim of this study was to examine the experience of registered nurses working in renal inpatients wards at an acute National Health Service (NHS) hospital Trust. Nurse perceptions of their experience particularly in relation to job satisfaction was analysed. Increased understanding of workplace organisation and culture can contribute to improved nurse work experience and better patient care. Worldwide many studies conducted on nurse experience and job satisfaction show that job satisfaction level varies across work settings so analysis of job satisfaction at a local level such as in a ward is important for producing useful analysis and recommendations. Using purposive sampling, semi structured individual interviews were conducted on twelve registered nurses working on renal inpatient wards. The study identified three themes: safe care, organisational culture and work environment. Although staffing was identified as a key element to providing safe care maintaining adequate staffing levels remained a challenge. Whilst there were opportunities for professional development more support is needed for newly qualified nurses. Findings highlighted that renal patients were complex. It is important to maintain adequate staffing levels. Good clinical leadership is required to support and develop the positive experience of nurses. The high turnover of newly qualified nurses is a particular problem and nurse managers need to develop strategies to retain such nurses. Regular audits on staffing levels as part of improving workforce planning and patient safety need to be conducted. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Automatic intersection map generation task 10 report.

DOT National Transportation Integrated Search

2016-02-29

This report describes the work conducted in Task 10 of the V2I Safety Applications Development Project. The work was performed by the University of Michigan Transportation Research Institute (UMTRI) under contract to the Crash Avoidance Metrics Partn...

Rigor in Qualitative Social Work Research: A Review of Strategies Used in Published Articles

ERIC Educational Resources Information Center

Barusch, Amanda; Gringeri, Christina; George, Molly

2011-01-01

This study was conducted to describe strategies used by social work researchers to enhance the rigor of their qualitative work. A template was developed and used to review a random sample of 100 articles drawn from social work journals listed in the "2005 Journal Citation Reports: Science and Social Sciences Edition." Results suggest that the most…

Investigators’ Successful Strategies for Working with Institutional Review Boards

PubMed Central

Cartwright, Juliana C.; Hickman, Susan E.; Nelson, Christine A.; Knafl, Kathleen A.

2014-01-01

This study was designed to identify successful strategies used by investigators for working with their Institutional Review Boards (IRBs) in conducting human subjects research. Telephone interviews were conducted with 46 investigators representing nursing, medicine, and social work. Interview transcripts were analyzed using qualitative descriptive methods. Investigators emphasized the importance of intentionally cultivating positive relationships with IRB staff and members, and managing bureaucracy. A few used evasive measures to avoid conflict with IRBs. Few successful strategies were identified for working with multiple IRBs. Although most investigators developed successful methods for working with IRBs, further research is needed on how differences in IRB culture affect human subjects protection, and on best approaches to IRB approval of multi-site studies. PMID:23813748

The Effect of International Social Work Education: Study Abroad versus On-Campus Courses

ERIC Educational Resources Information Center

Greenfield, Emily A.; Davis, Rebecca T.; Fedor, James P.

2012-01-01

Despite a growing emphasis on international offerings within social work education, researchers have conducted few outcomes studies regarding the implications of these courses for students' professional development. This study addressed this gap by analyzing data from a survey of 122 social work students at Rutgers, the State University of New…

Toward a Mediation Model of Employability Enhancement: A Study of Employee-Supervisor Pairs in the Building Sector

ERIC Educational Resources Information Center

van der Heijden, Beatrice I. J. M.; Bakker, Arnold B.

2011-01-01

This study examines whether jobs that enable competence development and a constructive leadership style enhance workers' employability or career potential through their assumed positive relationship with work-related flow (absorption, work enjoyment, and intrinsic work motivation). The authors conducted an explorative study with 303 pairs of…

Developing Governmentality: Conduct [to the third power] and Education Policy

ERIC Educational Resources Information Center

Gillies, Donald

2008-01-01

This article examines education policy and the policy process in the light of two key concepts. The first is the concept of "governmentality" from the work of Michel Foucault (1991). The second is the concept of "political spectacle" from the work of Murray Edelman (1985, 1988). Taking note, further, of recent work by…

Career Implications of Doctoral Social Work Student Debt Load

ERIC Educational Resources Information Center

Begun, Audrey L.; Carter, James R.

2017-01-01

Although research has been conducted in other professional disciplines, social work has yet to explore how doctoral student debt load influences career development. This exploratory study surveyed 281 social work doctoral students and recent graduates, 75 BSW and MSW program leaders, and 24 doctoral program leaders about debt load, career choices,…

How Work-Family Research Can Finally Have an Impact in Organizations.

PubMed

Kossek, Ellen Ernst; Baltes, Boris B; Matthews, Russell A

2011-09-01

Although work-family research has mushroomed over the past several decades, an implementation gap persists in putting work-family research into practice. Because of this, work-family researchers have not made a significant impact in improving the lives of employees relative to the amount of research that has been conducted. The goal of this article is to clarify areas where implementation gaps between work-family research and practice are prevalent, discuss the importance of reducing these gaps, and make the case that both better and different research should be conducted. We recommend several alternative but complementary actions for the work-family researcher: (a) work with organizations to study their policy and practice implementation efforts, (b) focus on the impact of rapid technological advances that are blurring work-family boundaries, (c) conduct research to empower the individual to self-manage the work-family interface, and (d) engage in advocacy and collaborative policy research to change institutional contexts and break down silos. Increased partnerships between industrial-organizational (I-O) psychology practitioners and researchers from many industries and disciplines could break down silos that we see as limiting development of the field.

Development of Working Memory and Performance in Arithmetic: A Longitudinal Study with Children

ERIC Educational Resources Information Center

López, Magdalena

2014-01-01

Introduction: This study has aimed to investigate the relationship between the development of working memory and performance on arithmetic activities. Method: We conducted a 3-year longitudinal study of a sample of 90 children, that was followed during the first, second and third year of primary school. All children were tested on measures of WM…

Mixing, Noise and Thrust Benefits Using Corrugated Designs

NASA Technical Reports Server (NTRS)

White, Samuel G.; Gilinsky, Mikhail M.

1998-01-01

This project was conducted as a support for effective research, training and teaching of Hampton University students in Fluid Mechanics and Acoustics. Basically, this work is organized and implemented by the new Fluid Mechanics and Acoustics Laboratory (FM & AL) which was established at Hampton University in the School of Engineering and Technology (E & T) in 1996. In addition, FM & AL in cooperation with NASA LaRC jointly conducts research with the Central AeroHydrodynamics Institute (TSAGI, Moscow) in Russia under a 2 year Civilian Research and Development Foundation (CRDF). This project is also conducted under control of NASA HQ. For fulfillment of the current project, several researchers were involved as was shown in the proposal to NASA in 1996. This work is the development and support for projects solve problems with the goal of reducing jet noise and increasing nozzle thrust.

MICROFLORA INVOLVED IN PHYTOREMEDIATION OF POLYAROMATIC HYDROCARBONS

EPA Science Inventory

This research was accomplished by conducting a series of integrated studies starting with field work at contaminated sites, followed by laboratory studies based on the field work, and concluded with development of preliminary molecular monitoring methods tested on field sam...

Development of EXITE3, Imaging Detectors and a Long Duration Balloon Gondola

NASA Technical Reports Server (NTRS)

2003-01-01

In this Report we summarize the work conducted for the EXITE program under grant NAG5-5103. This grant supported the ongoing EXITE program at Harvard for the development of imaging hard x-ray detectors and telescopes over the 3 year period 1997-2000 with a one year extension to 2001 to transition to the next SR&T grant in this program. Work was conducted in three major parts: analysis of the EXITE2 balloon flight data (from our May 1997 flight); development of pixellated imaging Cd-Zn-Te detector arrays and readout systems for the proposed EXITE3 detector and telescope; and development of systems for a Long Duration Balloon (LDB) gondola. Progress on all three major aspects of this research is summarized for each of the years of this grant.

Development of Conceptual Framework to Understand Factors Associated with Return to Work among Cancer Survivors: A Systematic Review

PubMed Central

CHOW, Sze Loon; TING, Anselm Su; SU, Tin Tin

2014-01-01

Abstract This systematic review was conducted to develop a conceptual framework that addresses various factors associated with return to work among cancer survivors. Databases Medline, EMBASE, ProQuest, PubMed and ScienceDirect were systematically searched using medical subject headings [MeSH] for studies published in English from 1990 to 2013. Studies that described adult cancer patients’ self-reported data or patients’ point of view on factors associated with return to work or employment status following cancer diagnosis were included. Articles selection was conducted in three steps: selection based on title and abstract, retrieval of full text and additions of articles from reference lists and recommendations from experts. Disagreement in data extraction was solved by consultation of third reviewer. Out of twenty seven articles, breast cancer was the most studied type of cancer (30%) while colorectal cancer was studied independently in two articles (7.4%). Conceptual framework on return to work identifies factors under environmental, personal, work demand, work ability, health status and financial factors. Extensive search of scientific databases over last 24 years and the development of the conceptual frame-work are the strength of this review. Conceptual framework reveals the various factors including non-medical factors associated with return to work upon cancer diagnosis. It serves as a reminder to the policy makers to focus on modifiable factors as potential areas for intervention to assist cancer survivors return to work, especially those with little financial assistance and health insurance. PMID:28435811

Occupational Education Program, Image of the World of Work. Description and Analysis of Teacher Orientation Activities (August 1968).

ERIC Educational Resources Information Center

Colorado State Univ., Ft. Collins. Human Factors Research Lab.

A project was conducted to determine the relationship between changes in attitudes toward work of seventh grade pupils and specified instructional practices of their social studies or language arts teachers. The study encompassed: (1) developing and administering instruments to students and instructors to asess attitudes toward work, (2)…

Deliberate Practice in Medicine: The Motivation to Engage in Work-Related Learning and Its Contribution to Expertise

ERIC Educational Resources Information Center

van de Wiel, Margje W. J.; Van den Bossche, Piet

2013-01-01

This study examined physicians' motivation to engage in work-related learning and its contribution to expertise development beyond work experience. Based on deliberate practice theory, semi-structured interviews were conducted with 17 residents and 28 experienced physicians in internal medicine, focusing on the activities they engaged in during…

Working Together for a Competitive Workforce. A Handbook for State Policy Teams. Investing in People Project.

ERIC Educational Resources Information Center

Zinser, Jana

This handbook describes the methodology of the Investing in People Project, conducted in Connecticut, Iowa, Kentucky, Washington, and West Virginia to help states in assessing their current work force and economic development systems and in building more comprehensive, integrated, and effective strategies for improving the work force. The handbook…

Evaluation of Occupational Therapy Workshops to Prevent Work-Related Injuries or Illnesses among Vocational Students

ERIC Educational Resources Information Center

Lecours, Alexandra; Therriault, Pierre-Yves

2018-01-01

The few studies aiming to evaluate prevention interventions provided by occupational therapists in health at work were conducted in work settings. However, to intervene in primary prevention, developing occupational therapy interventions with students learning a trade is relevant. The objective is to evaluate workshops designed and set up by…

FutureWorks: An Alternative Avenue to Success. Practitioner Research Briefs, 1999-2000 Report Series.

ERIC Educational Resources Information Center

Cochran, Elizabeth

A teacher who teaches General Educational Development preparation to at-risk teenagers in a nonprofit alternative education program called FutureWorks conducted a study to identify those elements of FutureWorks that keep students coming to the program. The study included the following data collection activities: a consensus-building activity to…

Medical ward round competence in internal medicine - an interview study towards an interprofessional development of an Entrustable Professional Activity (EPA).

PubMed

Wölfel, Teresa; Beltermann, Esther; Lottspeich, Christian; Vietz, Elisa; Fischer, Martin R; Schmidmaier, Ralf

2016-07-11

The medical ward round is a central but complex activity that is of relevance from the first day of work. However, difficulties for young doctors have been reported. Instruction of ward round competence in medical curricula is hampered by the lack of a standardized description of the procedure. This paper aims to identify and describe physicians' tasks and relevant competences for conducting a medical ward round on the first day of professional work. A review of recent literature revealed known important aspects of medical ward rounds. These were used for the development of a semi-structured interview schedule. Medical ward round experts working at different hospitals were interviewed. The sample consisted of 14 ward physicians (M = 8.82 years of work experience) and 12 nurses (M = 14.55 years of work experience) working in different specializations of internal medicine. All interviews were audiotaped, fully transcribed, and analyzed using an inductive-deductive coding scheme. Nine fields of competences with 18 related sub-competences and 62 observable tasks were identified as relevant for conducting a medical ward round. Over 70 % of the experts named communication, collaborative clinical reasoning and organization as essential competences. Deeper analysis further unveiled the importance of self-management, management of difficult situations, error management and teamwork. The study is the first to picture ward round competences and related tasks in detail and to define an EPA "Conducting an internal medicine ward round" based on systematic interprofessional expert interviews. It thus provides a basis for integration of ward round competences in the medical curricula in an evidence based manner and gives a framework for the development of instructional intervention studies and comparative studies in other medical fields.

Development of techniques for producing static strata maps and development of photointerpretive methods based on multitemporal LANDSAT data

NASA Technical Reports Server (NTRS)

Colwell, R. N. (Principal Investigator)

1977-01-01

The results and progress of work conducted in support of the Large Area Crop Inventory Experiment (LACIE) are documented. Research was conducted for two tasks. These tasks include: (1) evaluation of the UCB static stratification procedure and modification of that procedure if warranted; and (2) the development of alternative photointerpretive techniques to the present LACIE procedure for the identification and selection of training areas for machine-processing of LACIE segments.

Precision Rolled-Ink Nano-Technology; Development of a Direct Write Technique for the Fabrication of Thin Films and Conductive Elements

DTIC Science & Technology

2012-10-01

Fabrication of Thin Films and Conductive Elements Larry R. Holmes, Jr. Weapons and Materials Research Directorate, ARL...polymer composites, glass, metals, ceramics , and others. Development of the PRINT system and future work are discussed. 15. SUBJECT TERMS direct write...7 Figure 5. PRINT deposition on (left) polished aluminum sheet metal, and (right) aluminum oxide ceramic tile

High Power Magnetohydrodynamic System

DTIC Science & Technology

1978-07-01

AFAPL/POD as the Program Manager. Dr. Daniel W. Swallom and Dr. Otto K. Sonju of Maxwell Laboratories, Inc. were responsible for the technical work. The...fabricated and tested. Figure 1 shows this hardware installed at the Santa Susana Field Laboratory (SSFL) for develop- ment testing. The cooled wall...development test program was conducted at Santa Susana Field Laboratory (SSFL) and a performance test program is to be conducted at AEDC. AEDC is to

Low NOx Fuel Flexible Combustor Integration Project Overview

NASA Technical Reports Server (NTRS)

Walton, Joanne C.; Chang, Clarence T.; Lee, Chi-Ming; Kramer, Stephen

2015-01-01

The Integrated Technology Demonstration (ITD) 40A Low NOx Fuel Flexible Combustor Integration development is being conducted as part of the NASA Environmentally Responsible Aviation (ERA) Project. Phase 2 of this effort began in 2012 and will end in 2015. This document describes the ERA goals, how the fuel flexible combustor integration development fulfills the ERA combustor goals, and outlines the work to be conducted during project execution.

The many faces of sex work.

PubMed

Harcourt, C; Donovan, B

2005-06-01

To compile a global typography of commercial sex work. A Medline search and review of 681 "prostitution" articles was conducted. In addition, the investigators pooled their 20 years of collected papers and monographs, and their observations in more than 15 countries. Arbitrary categories were developed to compile a workable typology of sex work. At least 25 types of sex work were identified according to worksite, principal mode of soliciting clients, or sexual practices. These types of work are often grouped under the headings of "direct" and "indirect" prostitution, with the latter group less likely to be perceived or to perceive themselves as sex workers. In general, policing sex work can change its typology and location but its prevalence is rarely affected. The public health implications of sex work vary widely. Developing comprehensive sexual health promotion programmes requires a complete understanding of the types of sex work in a particular area. This study provides a checklist for developing appropriate and targeted programmes.

Very Long (> 48 hours) Shifts and Cardiovascular Strain in Firefighters: a Theoretical Framework

PubMed Central

2014-01-01

Shift work and overtime have been implicated as important work-related risk factors for cardiovascular disease (CVD). Many firefighters who contractually work on a 24-hr work schedule, often do overtime (additional 24-hr shifts) which can result in working multiple, consecutive 24-hr shifts. Very little research has been conducted on firefighters at work that examines the impact of performing consecutive 24-hr shifts on cardiovascular physiology. Also, there have been no standard field methods for assessing in firefighters the cardiovascular changes that result from 24-hr shifts, what we call “cardiovascular strain”. The objective of this study, as the first step toward elucidating the role of very long (> 48 hrs) shifts in the development of CVD in firefighters, is to develop and describe a theoretical framework for studying cardiovascular strain in firefighters on very long shifts (i.e., > 2 consecutive 24-hr shifts). The developed theoretical framework was built on an extensive literature review, our recently completed studies with firefighters in Southern California, e-mail and discussions with several firefighters on their experiences of consecutive shifts, and our recently conducted feasibility study in a small group of firefighters of several ambulatory cardiovascular strain biomarkers (heart rate, heart rate variability, blood pressure, salivary cortisol, and salivary C-reactive protein). The theoretical framework developed in this study will facilitate future field studies on consecutive 24-hr shifts and cardiovascular health in firefighters. Also it will increase our understanding of the mechanisms by which shift work or long work hours can affect CVD, particularly through CVD biological risk factors, and thereby inform policy about sustainable work and rest schedules for firefighters. PMID:24602344

Very Long (> 48 hours) Shifts and Cardiovascular Strain in Firefighters: a Theoretical Framework.

PubMed

Choi, Bongkyoo; Schnall, Peter L; Dobson, Marnie; Garcia-Rivas, Javier; Kim, Hyoungryoul; Zaldivar, Frank; Israel, Leslie; Baker, Dean

2014-03-06

Shift work and overtime have been implicated as important work-related risk factors for cardiovascular disease (CVD). Many firefighters who contractually work on a 24-hr work schedule, often do overtime (additional 24-hr shifts) which can result in working multiple, consecutive 24-hr shifts. Very little research has been conducted on firefighters at work that examines the impact of performing consecutive 24-hr shifts on cardiovascular physiology. Also, there have been no standard field methods for assessing in firefighters the cardiovascular changes that result from 24-hr shifts, what we call "cardiovascular strain". The objective of this study, as the first step toward elucidating the role of very long (> 48 hrs) shifts in the development of CVD in firefighters, is to develop and describe a theoretical framework for studying cardiovascular strain in firefighters on very long shifts (i.e., > 2 consecutive 24-hr shifts). The developed theoretical framework was built on an extensive literature review, our recently completed studies with firefighters in Southern California, e-mail and discussions with several firefighters on their experiences of consecutive shifts, and our recently conducted feasibility study in a small group of firefighters of several ambulatory cardiovascular strain biomarkers (heart rate, heart rate variability, blood pressure, salivary cortisol, and salivary C-reactive protein). The theoretical framework developed in this study will facilitate future field studies on consecutive 24-hr shifts and cardiovascular health in firefighters. Also it will increase our understanding of the mechanisms by which shift work or long work hours can affect CVD, particularly through CVD biological risk factors, and thereby inform policy about sustainable work and rest schedules for firefighters.

Cryogenic Thermal Management Advances during the CRYOTOOL Program

NASA Astrophysics Data System (ADS)

Bugby, D.; Stouffer, C.; Garzon, J.; Beres, M.; Gilchrist, A.; Roberts, T.; Davis, T.

2006-04-01

This paper describes the cryogenic thermal management advances made during the AFRL-sponsored CRYOTOOL program. Advances occurred as a result of conducting four technology development tasks: (1) development of a differential thermal expansion cryogenic thermal switch (DTE-CTSW) made with high purity Al end-pieces and an Ultem support rod; (2) carrying out of a dual DTE-CTSW/dual cryocooler performance test to quantify CTSW benefits in a redundant cryocooler system; (3) development of a miniaturized cryogenic loop heat pipe (mini-CLHP) that combines flex link, conduction bar, and CTSW functionalities; and (4) development of an across-gimbal cryogenic thermal transport system (GCTTS) with large diameter transport line coils for optics cooling. The results are as follows. The DTE-CTSW achieved an ON conductance of 2-3.6 W/K (from 35-90 K) and an OFF resistance of 1100-2300 K/W (300-230 K warm end). The redundant cryocooler test showed modest parasitic heat leak savings when dual DTE-CTSWs were used versus when they were not used. The mini-CLHP, using neon as the working fluid, transported 2.5 W at 35 K, achieved an OFF resistance of 1555 K/W, and had cross/axial flexibilities of 100-450 N/m. Lastly, GCTTS, using nitrogen as the working fluid, transported 20 W at 100 K in a flat configuration. Additional work is needed to verify GCTTS operation in an elevated orientation.

Analysis of the moral habitability of the nursing work environment.

PubMed

Peter, Elizabeth H; Macfarlane, Amy V; O'Brien-Pallas, Linda L

2004-08-01

Following health reform, nurses have experienced the tremendous stress of heavy workloads, long hours and difficult professional responsibilities. In recognition of these problems, a study was conducted that examined the impact of the working environment on the health of nurses. After conducting focus groups across Canada with nurses and others well acquainted with nursing issues, it became clear that the difficult work environments described had significant ethical implications. The aim of this paper is to report the findings of research that examined the moral habitability of the nursing working environment. A secondary analysis was conducted using the theoretical work of Margaret Urban Walker. Moral practices and responsibilities from Walker's perspective cannot be extricated from other social roles, practices and divisions of labour. Moral-social orders, such as work environments in this research, must be made transparent to examine their moral habitability. Morally habitable environments are those in which differently situated people experience their responsibilities as intelligible and coherent. They also foster recognition, cooperation and shared benefits. Four overarching categories were developed through the analysis of the data: (1) oppressive work environments; (2) incoherent moral understandings; (3) moral suffering and (4) moral influence and resistance. The findings clearly indicate that participants perceived the work environment to be morally uninhabitable. The social and spatial positioning of nurses left them vulnerable to being overburdened by and unsure of their responsibilities. Nevertheless, nurses found meaningful ways to resist and to influence the moral environment. We recommend that nurses develop strong moral identities, make visible the inseparability of their proximity to patients and moral accountability, and further identify what forms of collective action are most effective in improving the moral habitability of their work environments.

Crystalline and Crystalline International Disposal Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Viswanathan, Hari S.; Chu, Shaoping; Reimus, Paul William

2015-12-21

This report presents the results of work conducted between September 2014 and July 2015 at Los Alamos National Laboratory in the crystalline disposal and crystalline international disposal work packages of the Used Fuel Disposition Campaign (UFDC) for DOE-NE’s Fuel Cycle Research and Development program.

Information needs for making clinical recommendations about potential drug-drug interactions: a synthesis of literature review and interviews.

PubMed

Romagnoli, Katrina M; Nelson, Scott D; Hines, Lisa; Empey, Philip; Boyce, Richard D; Hochheiser, Harry

2017-02-22

Drug information compendia and drug-drug interaction information databases are critical resources for clinicians and pharmacists working to avoid adverse events due to exposure to potential drug-drug interactions (PDDIs). Our goal is to develop information models, annotated data, and search tools that will facilitate the interpretation of PDDI information. To better understand the information needs and work practices of specialists who search and synthesize PDDI evidence for drug information resources, we conducted an inquiry that combined a thematic analysis of published literature with unstructured interviews. Starting from an initial set of relevant articles, we developed search terms and conducted a literature search. Two reviewers conducted a thematic analysis of included articles. Unstructured interviews with drug information experts were conducted and similarly coded. Information needs, work processes, and indicators of potential strengths and weaknesses of information systems were identified. Review of 92 papers and 10 interviews identified 56 categories of information needs related to the interpretation of PDDI information including drug and interaction information; study design; evidence including clinical details, quality and content of reports, and consequences; and potential recommendations. We also identified strengths/weaknesses of PDDI information systems. We identified the kinds of information that might be most effective for summarizing PDDIs. The drug information experts we interviewed had differing goals, suggesting a need for detailed information models and flexible presentations. Several information needs not discussed in previous work were identified, including temporal overlaps in drug administration, biological plausibility of interactions, and assessment of the quality and content of reports. Richly structured depictions of PDDI information may help drug information experts more effectively interpret data and develop recommendations. Effective information models and system designs will be needed to maximize the utility of this information.

The Psychometric Properties and the Development of the Indicators of Quality Nursing Work Environments in Taiwan.

PubMed

Lin, Chiou-Fen; Lu, Meei-Shiow; Huang, Hsiu-Ying

2016-03-01

The nursing shortage in medical institutions in Taiwan averaged 9% in 2012, considerably higher than the 5% indicated in the literature. As a result, many hospitals have been forced to close wards or reduce beds. Despite the acute need, the percentage of registered nurses who are employed as nurses in Taiwan (60.4%) is considerably lower than those in Canada or the United States. This low rate may be because of the poor working environment for nurses in Taiwan. This study aimed to develop a set of nursing work environment quality indicators for Taiwan and to test the reliability and validity of the resulting survey tool. Multiple methods were used in this study. In Phase 1, we organized an expert panel, reviewed the literature, and conducted seven rounds of expert panel discussion and six focus group discussions with nursing directors. The goal was to draft indicators representing a quality nursing work environment to fit current conditions in Taiwan. In Phase 2, we conducted an expert review for content validity, held three public hearings, and conducted a survey. Four hundred twenty-seven questionnaires were sent out, with 381 returned. The goal was to test the content validity, construct validity, and internal consistency reliability. The study produced a set of indicators of a quality nursing work environment with eight dimensions and 65 items. The content validity index for importance and suitability dimensions were 1.0, whereas the internal consistency was 0.91. The eight dimensions were safe practice environment (16 items), quality and quantity of staff (four items), salary and welfare (seven items), professional specialization and teamwork (seven items), work simplification (five items), informatics (five items), career development (nine items), and support and caring (12 items). The overall load for the indicators was 77.57%. The developed indicators may be used to evaluate the quality of nursing work environments. Furthermore, the indicators may be used in hospital surveys to establish baseline conditions and for outcome research that measures improvement in nursing work environments after interventions.

Telepresence-enabled research and developing work practices

NASA Astrophysics Data System (ADS)

Mirmalek, Z.

2016-02-01

In the fall of 2014, a group of scientists and students conducted two weeks of telepresence-enabled research from the University of Rhode Island Inner Space Center and Woods Hole Oceanographic Institution with the Exploration Vessel Nautilus, which was at sea studying the Kick'em Jenny submarine volcano and Barbados Mud Volcanoes. The way that they conducted their work was not so different from other telepresence-enabled ocean science exploration. As a group, they spanned geographic distance, science expertise, exploration experience, and telepresence-enabled research experience. They were connected through technologies and work culture (e.g., shared habits, values, and practices particular to a community). Uniquely, their project included an NSF-sponsored cultural study on the workgroups' own use of technologies and social processes. The objective of the cultural study was, in part, to identify social and technical features of the work environment that present opportunities to better support science exploration via telepresence. Drawing from this case, and related research, I present some analysis on the developing work culture of telepresence-enabled research and highlight potential adjustments.

National Aquatic Resource Surveys & Statistics: Role of statistics in the development of a national monitoring program

EPA Science Inventory

The National Aquatic Resource Surveys (NARS) are a series of four statistical surveys conducted by the U.S. Environmental Protection Agency working in collaboration with states, tribal nations and other federal agencies. The surveys are conducted for lakes and reservoirs, streams...

Solar Panels and Alternative Energy in the Eighth-Grade Classroom

ERIC Educational Resources Information Center

Buck, Laura

2010-01-01

In this solar panels and alternative energy project, students were challenged to develop a researchable question about solar energy and electronics and devise a means of answering it. Students worked cooperatively, with specific roles for each member, conducting research, conducting experiments, analyzing results, and writing the final…

Final Report - ILAW PCT, VHT, Viscosity, and Electrical Conductivity Model Development, VSL-07R1230-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kruger, Albert A.; Cooley, S. K.; Joseph, I.

This report describes the results of work and testing specified by the Test Specifications (24590-LAW-TSP-RT-01-013 Rev.1 and 24590-WTP-TSP-RT-02-001 Rev.0), Test Plans (VSL-02T4800-1 Rev.1 & TP-RPP-WTP-179 Rev.1), and Text Exception (24590-WTP-TEF-RT-03-040). The work and any associated testing followed established quality assurance requirements and conducted as authorized. The descriptions provided in this test report are an accurate account of both the conduct of the work and the data collected. Results required by the Test Plans are reported. Also reported are any unusual or anomalous occurrences that are different from the starting hypotheses. The test results and this report have been reviewed andmore » verified.« less

14 CFR 1204.401 - Policy.

Code of Federal Regulations, 2011 CFR

2011-01-01

... (including small women-owned businesses), Historically Black Colleges and Universities, and other minority... the specific branch of science or technology required for the successful conduct of the work. It is in... development work for NASA be expanded and that there be an increase in the extent of participation in such...

77 FR 52328 - National Environmental Justice Advisory Council; Notification of Public Teleconference Meeting...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... addressing tribal and indigenous peoples environmental justice issues and concerns. There will be a public.... What activities and mechanisms should EPA conduct and develop to work collaboratively with indigenous... discourage tribal governments and indigenous organizations from effectively working together to address...

Night Moves: A Qualitative Investigation of Street-Level Sex Work

ERIC Educational Resources Information Center

Dalla, Rochelle L.

2002-01-01

The subculture of street-level sex work including the social environment, drug use and abuse, and violence was examined. Personal interviews were conducted with 43 women involved in streetwalking prostitution. Data were analyzed using Phenomenological Descriptive Analysis (Colaizzi, 1978). Several participants reported developing emotional…

Development of the Modes of Collaboration Framework

ERIC Educational Resources Information Center

Pawlak, Alanna; Irving, Paul W.; Caballero, Marcos D.

2018-01-01

Group work is becoming increasingly common in introductory physics classrooms. Understanding how students engage in these group learning environments is important for designing and facilitating productive learning opportunities for students. We conducted a study in which we collected video of groups of students working on conceptual electricity…

Maintaining Research Integrity While Balancing Cultural Sensitivity: A Case Study and Lessons From the Field.

PubMed

Sibbald, Rebekah; Loiseau, Bethina; Darren, Benedict; Raman, Salem A; Dimaras, Helen; Loh, Lawrence C

2016-04-01

Contemporary emphasis on creating culturally relevant and context specific knowledge increasingly drives researchers to conduct their work in settings outside their home country. This often requires researchers to build relationships with various stakeholders who may have a vested interest in the research. This case study examines the tension between relationship development with stakeholders and maintaining study integrity, in the context of potential harms, data credibility and cultural sensitivity. We describe an ethical breach in the conduct of global health research by a arising from the ad-hoc participation of a community stakeholder external to the visiting research group. A framework for reflection is developed from a careful examination of underlying factors and presented with a discussion of consequences and mitigation measures. This framework aims to present lessons learned for researchers working abroad who might face similar situations in their work. © 2015 John Wiley & Sons Ltd.

Perfecting Scientists' Collaboration and Problem-Solving Skills in the Virtual Team Environment

NASA Astrophysics Data System (ADS)

Jabro, A.; Jabro, J.

2012-04-01

PPerfecting Scientists' Collaboration and Problem-Solving Skills in the Virtual Team Environment Numerous factors have contributed to the proliferation of conducting work in virtual teams at the domestic, national, and global levels: innovations in technology, critical developments in software, co-located research partners and diverse funding sources, dynamic economic and political environments, and a changing workforce. Today's scientists must be prepared to not only perform work in the virtual team environment, but to work effectively and efficiently despite physical and cultural barriers. Research supports that students who have been exposed to virtual team experiences are desirable in the professional and academic arenas. Research supports establishing and maintaining established protocols for communication behavior prior to task discussion provides for successful team outcomes. Research conducted on graduate and undergraduate virtual teams' behaviors led to the development of successful pedagogic practices and assessment strategies.

Phase Distribution Phenomena for Simulated Microgravity Conditions: Experimental Work

NASA Technical Reports Server (NTRS)

Singhal, Maneesh; Bonetto, Fabian J.; Lahey, R. T., Jr.

1996-01-01

This report summarizes the work accomplished at Rensselaer to study phase distribution phenomenon under simulated microgravity conditions. Our group at Rensselaer has been able to develop sophisticated analytical models to predict phase distribution in two-phase flows under a variety of conditions. These models are based on physics and data obtained from carefully controlled experiments that are being conducted here. These experiments also serve to verify the models developed.

Phase Distribution Phenomena for Simulated Microgravity Conditions: Experimental Work

NASA Technical Reports Server (NTRS)

Singhal, Maneesh; Bonetto, Fabian J.; Lahey, R. T., Jr.

1996-01-01

This report summarizes the work accomplished at Rensselaer to study phase distribution phenomenon under simulated microgravity conditions. Our group at Rensselaer has been able to develop sophisticated analytical models to predict phase distribution in two-phase flows under variety of conditions. These models are based on physics and data obtained from carefully controlled experiments that are being conducted here. These experiments also serve to verify the models developed.

BladeRunners and Picasso Cafe: A Case Study Evaluation of Two Work-Based Training Programs for Disadvantaged Youth.

ERIC Educational Resources Information Center

Currie, Sheila; Foley, Kelly; Schwartz, Saul; Taylor-Lewis, Musu

In 1998, Canada's Social Research and Demonstration Corporation (SRDC) conducted case studies of two work-based training and skill development programs for street youth in Vancouver, British Columbia. The BladeRunners program places youth on construction sites while encouraging them to work toward an apprenticeship in the building trades. The…

Europe Report, Science and Technology.

DTIC Science & Technology

1986-09-29

for example, research is being conducted on the synthesis of antibiotics from slime bacteria (myxobacteria), the formation of pigments with...nannocystis, and the formation of steroids. In cooperation with the enzyme technology division, work is also being done on cofactor regeneration in L-amino...also supporting work in product development at Asea Cerama in Robertfors, where they are working with silicon carbide and zirconium dioxide. 12507

KENNEDY SPACE CENTER, FLA. - Research team members work with acoustic cable during underwater acoustic research being conducted in the Launch Complex 39 turn basin. Several government agencies, including NASA, NOAA, the Navy, the Coast Guard, and the Florida Fish and Wildlife Commission are involved in the testing. The research involves demonstrations of passive and active sensor technologies, with applications in fields ranging from marine biological research to homeland security. The work is also serving as a pilot project to assess the cooperation between the agencies involved. Equipment under development includes a passive acoustic monitor developed by NASA’s Jet Propulsion Laboratory, and mobile robotic sensors from the Navy’s Mobile Diving and Salvage Unit.

NASA Image and Video Library

2003-08-18

KENNEDY SPACE CENTER, FLA. - Research team members work with acoustic cable during underwater acoustic research being conducted in the Launch Complex 39 turn basin. Several government agencies, including NASA, NOAA, the Navy, the Coast Guard, and the Florida Fish and Wildlife Commission are involved in the testing. The research involves demonstrations of passive and active sensor technologies, with applications in fields ranging from marine biological research to homeland security. The work is also serving as a pilot project to assess the cooperation between the agencies involved. Equipment under development includes a passive acoustic monitor developed by NASA’s Jet Propulsion Laboratory, and mobile robotic sensors from the Navy’s Mobile Diving and Salvage Unit.

Measurement of vertical track deflection from a moving rail car.

DOT National Transportation Integrated Search

2013-02-01

The University of Nebraska has been conducting research sponsored by the Federal Railroad Administrations Office of Research and Development to develop a system that measures vertical track deflection/modulus from a moving rail car. Previous work ...

Mechanisation and automation technologies development in work at construction sites

NASA Astrophysics Data System (ADS)

Sobotka, A.; Pacewicz, K.

2017-10-01

Implementing construction work that creates buildings is a very complicated and laborious task and requires the use of various types of machines and equipment. For years there has been a desire for designers and technologists to introduce devices that replace people’s work on machine construction, automation and even robots. Technologies for building construction are still being developed and implemented to limit people’s hard work and improve work efficiency and quality in innovative architectonical and construction solutions. New opportunities for improving work on the construction site include computerisation of technological processes and construction management for projects and processes. The aim of the paper was to analyse the development of mechanisation, automation and computerisation of construction processes and selected building technologies, with special attention paid to 3D printing technology. The state of mechanisation of construction works in Poland and trends in its development in construction technologies are presented. These studies were conducted on the basis of the available literature and a survey of Polish construction companies.

Paternal psychosocial work conditions and mental health outcomes: a case-control study.

PubMed

Maggi, Stefania; Ostry, Aleck; Tansey, James; Dunn, James; Hershler, Ruth; Chen, Lisa; Hertzman, Clyde

2008-03-31

The role of social and family environments in the development of mental health problems among children and youth has been widely investigated. However, the degree to which parental working conditions may impact on developmental psychopathology has not been thoroughly studied. We conducted a case-control study of several mental health outcomes of 19,833 children of sawmill workers and their association with parental work stress, parental socio-demographic characteristics, and paternal mental health. Multivariate analysis conducted with four distinct age groups (children, adolescents, young adults, and adults) revealed that anxiety based and depressive disorders were associated with paternal work stress in all age groups and that work stress was more strongly associated with alcohol and drug related disorders in adulthood than it was in adolescence and young adulthood. This study provides support to the tenet that being exposed to paternal work stress during childhood can have long lasting effects on the mental health of individuals.

Development of a Hot Working Steel Based on a Controlled Gas-Metal-Reaction

NASA Astrophysics Data System (ADS)

Ritzenhoff, Roman; Gharbi, Mohammad Malekipour

As a result of cost sensitiveness, the demand on hot working steels with advanced characteristics and properties are ascending. We have used a controlled gas-metal-reaction in a P-ESR furnace to produce high quality hot working steel. These types of materials are also known as High Nitrogen Steels (HNS). An overview of the development in a pressurized induction furnace to the final industrial scale using P-ESR will be provided. Different heat treatment strategies are conducted and their effect on mechanical properties is investigated.

Reversible median nerve impairment after three weeks of repetitive work.

PubMed

Tabatabaeifar, Sorosh; Svendsen, Susanne Wulff; Johnsen, Birger; Hansson, Gert-Åke; Fuglsang-Frederiksen, Anders; Frost, Poul

2017-03-01

Objectives The aim of this study was to evaluate the development of impaired median nerve function in relation to hand-intensive seasonal work. We hypothesized that at end-season, median nerve conduction would be impaired and then recover within weeks. Methods Using nerve conduction studies (NCS), we examined median nerve conduction before, during, and after engaging in 22 days of mink skinning. For a subgroup, we used goniometry and surface electromyography to characterize occupational mechanical exposures. Questionnaire information on symptoms, disability, and lifestyle factors was obtained. Results The study comprised 11 male mink skinners with normal median nerve conduction at pre-season (mean age 35.7 years, mean number of seasons with skinning 8.9 years). Mink skinning was characterized by a median angle of wrist flexion/extension of 16º extension, a median velocity of wrist flexion/extension of 22 °/s, and force exertions of 11% of maximal voluntary electrical activity. At end-season, mean distal motor latency (DML) had increased 0.41 ms (P<0.001), mean sensory nerve conduction velocity (SNCV) digit 2 had decreased 6.3 m/s (P=0.004), and mean SNCV digit 3 had decreased 6.2 m/s (P=0.01); 9 mink skinners had decreases in nerve conduction, 5 fulfilled electrodiagnostic criteria and 4 fulfilled electrodiagnostic and clinical criteria (a positive Katz hand diagram) for carpal tunnel syndrome (CTS). Three to six weeks post-season, the changes had reverted to normal. Symptom and disability scores showed corresponding changes. Conclusions In this natural experiment, impaired median nerve conduction developed during 22 days of repetitive industrial work with moderate wrist postures and limited force exertion. Recovery occurred within 3-6 weeks post-season.

The Development of Cockpit Display and Alerting Concepts for Interval Management (IM) in a Near-Term Environment

NASA Technical Reports Server (NTRS)

Baxley, Brian T.; Shay, Richard F.; Swieringa, Kurt A.

2014-01-01

The National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) Interval Management (IM) research team has conducted a wide spectrum of work in the recent past, ranging from development and testing of the concept, procedures, and algorithm. This document focuses on the research and evaluation of the IM pilot interfaces, cockpit displays, indications, and alerting concepts for conducting IM spacing operations. The research team incorporated knowledge of human factors research, industry standards for cockpit design, and cockpit design philosophies to develop innovative displays for conducting these spacing operations. The research team also conducted a series of human-in-the-loop (HITL) experiments with commercial pilots and air traffic controllers, in as realistic a high-density arrival operation environment as could be simulated, to evaluate the spacing guidance display features and interface requirements needed to conduct spacing operations.

Mentor or Evaluator? Assisting and Assessing Newcomers to the Professions

ERIC Educational Resources Information Center

Le Maistre, Cathrine; Boudreau, Spencer; Pare, Anthony

2006-01-01

Purpose: A four-year longitudinal study was conducted on the school-to-work transition in four professions traditionally called "helping professions," namely education, social work, occupational therapy, and physiotherapy. One goal of the study was to understand the nature and process of the mentoring relationships that develop and sustain…

MSW Programs: Gatekeepers to the Field of Developmental Disabilities

ERIC Educational Resources Information Center

Russo-Gleicher, Rosalie J.

2008-01-01

This article presents qualitative insights into the roles of master of social work programs in developing student practice interests in working with people with developmental disabilities (DD). Semistructured in-depth interviews were conducted with 24 MSW social workers practicing in the field of DD in the northeastern United States. Participants…

Psychometric Properties of Work-Related Behavior and Experience Patterns (AVEM) Scale

ERIC Educational Resources Information Center

Gencer, R. Timucin; Boyacioglu, Hayal; Kiremitci, Olcay; Dogan, Birol

2010-01-01

"Work-Related Behaviour and Experience Patterns" (AVEM) has been developed with the intention of determining the occupation related behaviour and lifestyle models of professionals. This study has been conducted to test the validity and reliability of MEDYAM, the abbreviated Turkish equivalent of AVEM. 373 teachers from 10 different…

What Pupils Can Learn from Working with Robotic Direct Manipulation Environments

ERIC Educational Resources Information Center

Slangen, Lou; van Keulen, Hanno; Gravemeijer, Koeno

2011-01-01

This study investigates what pupils aged 10-12 can learn from working with robots, assuming that understanding robotics is a sign of technological literacy. We conducted cognitive and conceptual analysis to develop a frame of reference for determining pupils' understanding of robotics. Four perspectives were distinguished with increasing…

A Study of Imputation Algorithms. Working Paper Series.

ERIC Educational Resources Information Center

Hu, Ming-xiu; Salvucci, Sameena

Many imputation techniques and imputation software packages have been developed over the years to deal with missing data. Different methods may work well under different circumstances, and it is advisable to conduct a sensitivity analysis when choosing an imputation method for a particular survey. This study reviewed about 30 imputation methods…

78 FR 78341 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

... titled, ``Development of Metrics to Measure Financial Well-being of Working-age and Older American... Measure Financial Well-being of Working-age and Older American Consumers. OMB Control Number: 3170-XXXX... charged with conducting research to identify methods and strategies to educate and counsel seniors, and...

Evidence Scan of Work Experience Programs. Mathematica Reference Number: 06747-100

ERIC Educational Resources Information Center

Sattar, Samina

2010-01-01

This study, being conducted through the Center for Improving Research Evidence (CIRE) at Mathematica Policy Research for the venture philanthropy organization REDF (formerly The Roberts Enterprise Development Fund), presents the evidence on the effectiveness of interventions that include work experience as a strategy to improve employment outcomes…

A proto-code of ethics and conduct for European nurse directors.

PubMed

Stievano, Alessandro; De Marinis, Maria Grazia; Kelly, Denise; Filkins, Jacqueline; Meyenburg-Altwarg, Iris; Petrangeli, Mauro; Tschudin, Verena

2012-03-01

The proto-code of ethics and conduct for European nurse directors was developed as a strategic and dynamic document for nurse managers in Europe. It invites critical dialogue, reflective thinking about different situations, and the development of specific codes of ethics and conduct by nursing associations in different countries. The term proto-code is used for this document so that specifically country-orientated or organization-based and practical codes can be developed from it to guide professionals in more particular or situation-explicit reflection and values. The proto-code of ethics and conduct for European nurse directors was designed and developed by the European Nurse Directors Association's (ENDA) advisory team. This article gives short explanations of the code' s preamble and two main parts: Nurse directors' ethical basis, and Principles of professional practice, which is divided into six specific points: competence, care, safety, staff, life-long learning and multi-sectorial working.

Kinematic control model for light weighting mechanism of excavator attached to rotary working device

NASA Astrophysics Data System (ADS)

Lee, Choongho; Lee, Sangsik; Cho, Youngtae; Im, Kwanghee

2007-07-01

An excavator attached to a rotary working device is used principally in industrial work. In particular, they are used in the building industry and public works. This research concerns the rotary automatic control of an excavator attached to a rotary working device. The drilling excavator is used in the crushed stone industry and the dragline excavation system is employed in the construction industry. Cases of the excavator's use in agriculture have been the subject of a relatively few studies. However, several modified excavator designs have been released in recent years. Applied excavator products are primarily utilized under relatively severe environmental conditions. In this study, we focus on the uses of an excavator in agricultural work. The readjustment of arable land and the reduction of weeds in agricultural applications both require skilled hand-operation of the machines. As such workers have been shown to develop problems with regard to working posture and proper positioning while laboring, a more appropriate excavator design may prove useful in such applications. Therefore, this pilot study is focused primarily on the rotary automatic control of an excavator attached to a rotary working device, and will adapt smart materials to the excavator applications for developing redesigned excavator having a light weight. The excavator is attached to a rotary working device on a normal excavator's platform, and the position and orientation of the mechanism between the joints and the rotary working device was determined. Simulations were also conducted of the excavator attached to the rotary working device. With an eye toward the use of this mechanism in agricultural work, we also conducted a set of kinematic analyses. The rotary working device was assumed to have 3 DOF, and was comprised of 5 links. Computer simulations were also conducted using the developed excavator model. In order to adequately evaluate the possible performance of such a system, kinetic analysis, simulation with a soil model, FEM analysis with structural strength analysis, and changes to the smart materials with high rigidity will be required in the future. In addition, experiment and analysis of a prototype, durability experiments, and analyses utilizing S-N curves will be necessary, as well further research into the overall reliability of such a product.

CAD/CAM approach to improving industry productivity gathers momentum

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1982-01-01

Recent results and planning for the NASA/industry Integrated Programs for Aerospace-Vehicle Design (IPAD) program for improving productivity with CAD/CAM methods are outlined. The industrial group work is being mainly done by Boeing, and progress has been made in defining the designer work environment, developing requirements and a preliminary design for a future CAD/CAM system, and developing CAD/CAM technology. The work environment was defined by conducting a detailed study of a reference design process, and key software elements for a CAD/CAM system have been defined, specifically for interactive design or experiment control processes. Further work is proceeding on executive, data management, geometry and graphics, and general utility software, and dynamic aspects of the programs being developed are outlined

New Mexico statewide geothermal energy program. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Icerman, L.; Parker, S.K.

1988-04-01

This report summarizes the results of geothermal energy resource assessment work conducted by the New Mexico Statewide Geothermal Energy Program during the period September 7, 1984, through February 29, 1988, under the sponsorship of the US Dept. of Energy and the State of New Mexico Research and Development Institute. The research program was administered by the New Mexico Research and Development Institute and was conducted by professional staff members at New Mexico State University and Lightning Dock Geothermal, Inc. The report is divided into four chapters, which correspond to the principal tasks delineated in the above grant. This work extendsmore » the knowledge of the geothermal energy resource base in southern New Mexico with the potential for commercial applications.« less

Computational multiobjective topology optimization of silicon anode structures for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Mitchell, Sarah L.; Ortiz, Michael

2016-09-01

This study utilizes computational topology optimization methods for the systematic design of optimal multifunctional silicon anode structures for lithium-ion batteries. In order to develop next generation high performance lithium-ion batteries, key design challenges relating to the silicon anode structure must be addressed, namely the lithiation-induced mechanical degradation and the low intrinsic electrical conductivity of silicon. As such this work considers two design objectives, the first being minimum compliance under design dependent volume expansion, and the second maximum electrical conduction through the structure, both of which are subject to a constraint on material volume. Density-based topology optimization methods are employed in conjunction with regularization techniques, a continuation scheme, and mathematical programming methods. The objectives are first considered individually, during which the influence of the minimum structural feature size and prescribed volume fraction are investigated. The methodology is subsequently extended to a bi-objective formulation to simultaneously address both the structural and conduction design criteria. The weighted sum method is used to derive the Pareto fronts, which demonstrate a clear trade-off between the competing design objectives. A rigid frame structure was found to be an excellent compromise between the structural and conduction design criteria, providing both the required structural rigidity and direct conduction pathways. The developments and results presented in this work provide a foundation for the informed design and development of silicon anode structures for high performance lithium-ion batteries.

Technique development for conducting mechanical tests to study the pore formation process in case of material fracture

NASA Astrophysics Data System (ADS)

Magomedova, D. K.; Efimov, M. A.; Murashkin, M. Yu.

2018-05-01

The main purpose of this work was the development of an experimental technique for search and analysis of pore formation in the presented material. Geometry of the samples, the procedure of experiment and processing the samples for investigation were developed.

Gaining Ground: The Labor Market Progress of Sectoral Employment Development Programs. SEDLP Research Report.

ERIC Educational Resources Information Center

Zandniapour, Lily; Conway, Maureen

The Sectoral Employment Development Learning Project conducted a longitudinal survey of participants of industry-based workforce development programs about two years after completing training. Outcomes for unemployed and underemployed workers--77 percent of the sample--indicated increased hours worked and increased earnings per hour produced…

"I Like Others to Not Try to Fix Me": Agency, Independence, and Autism

ERIC Educational Resources Information Center

Rossetti, Zachary; Ashby, Christine; Arndt, Katrina; Chadwick, Marilyn; Kasahara, Maho

2008-01-01

This article is based on an interpretevist, qualitative research project conducted with individuals labeled with "autism" who type to communicate. Researchers engaged in participant observation and conducted open-ended interviews with 9 participants who were working to develop independent typing skills. Three findings emerged from this research.…

Refining methods for conducting long-term sediment and water toxicity tests with Chironomus dilutus: Formation of a midge chronic testing work group

EPA Science Inventory

Standard methods have been established by USEPA, ASTM International, Environment Canada and Organization for Economic Cooperation and Development for conducting sediment toxicity tests with various species of midges including Chironomus dilutus. Short-term 10-day exposures are ty...

77 FR 1708 - Cooperative Research and Development Agreement: Technology To Provide Wireless Precise Time...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-11

... determine the viability of certain wireless alternative timing approaches by conducting live, on-air tests... conducted from other sites as deemed necessary during CRADA testing. Reception of these test broadcasts are..., Test Plan, and Project Report for each phase of the CRADA work. We anticipate that the non-Federal...

Guidelines for Conducting an Ethnic Heritage Search.

ERIC Educational Resources Information Center

Williams, Maxine Patrick

Based on the work of a 22-member research team in the San Diego Community College District, this booklet offers guidelines for developing cultural awareness and presents instruments for conducting an ethnic heritage search, i.e., a systematic examination of a culture to, for example, reveal reasons for customs or practices or clarify the modes of…

Rotorcraft handling-qualities design criteria development

NASA Technical Reports Server (NTRS)

Aiken, Edwin W.; Lebacqz, J. Victor; Chen, Robert T. N.; Key, David L.

1988-01-01

Joint NASA/Army efforts at the Ames Research Center to develop rotorcraft handling-qualities design criteria began in earnest in 1975. Notable results were the UH-1H VSTOLAND variable stability helicopter, the VFA-2 camera-and-terrain-board simulator visual system, and the generic helicopter real-time mathematical model, ARMCOP. An initial series of handling-qualities studies was conducted to assess the effects of rotor design parameters, interaxis coupling, and various levels of stability and control augmentation. The ability to conduct in-flight handling-qualities research was enhanced by the development of the NASA/Army CH-47 variable-stability helicopter. Research programs conducted using this vehicle include vertical-response investigations, hover augmentation systems, and the effects of control-force characteristics. The handling-qualities data base was judged to be sufficient to allow an update of the military helicopter handling-qualities specification, MIL-H-8501. These efforts, including not only the in-house experimental work but also contracted research and collaborative programs performed under the auspices of various international agreements. The report concludes by reviewing the topics that are currently most in need of work, and the plans for addressing these topics.

Integrating the results of user research into medical device development: insights from a case study.

PubMed

Martin, Jennifer L; Barnett, Julie

2012-07-19

It is well established that considering users is an important aspect of medical device development. However it is also well established that there are numerous barriers to successfully conducting user research and integrating the results into product development. It is not sufficient to simply conduct user research, it must also be effectively integrated into product development. A case study of the development of a new medical imaging device was conducted to examine in detail how users were involved in a medical device development project. Two user research studies were conducted: a requirements elicitation interview study and an early prototype evaluation using contextual inquiry. A descriptive in situ approach was taken to investigate how these studies contributed to the product development process and how the results of this work influenced the development of the technology. Data was collected qualitatively through interviews with the development team, participant observation at development meetings and document analysis. The focus was on investigating the barriers that exist to prevent user data from being integrated into product development. A number of individual, organisational and system barriers were identified that functioned to prevent the results of the user research being fully integrated into development. The user and technological aspects of development were seen as separate work streams during development. The expectations of the developers were that user research would collect requirements for the appearance of the device, rather than challenge its fundamental concept. The manner that the user data was communicated to the development team was not effective in conveying the significance or breadth of the findings. There are a range of informal and formal organisational processes that can affect the uptake of user data during medical device development. Adopting formal decision making processes may assist manufacturers to take a more integrated and reflective approach to development, which should result in improved business decisions and a higher quality end product.

Integrating the results of user research into medical device development: insights from a case study

PubMed Central

2012-01-01

Background It is well established that considering users is an important aspect of medical device development. However it is also well established that there are numerous barriers to successfully conducting user research and integrating the results into product development. It is not sufficient to simply conduct user research, it must also be effectively integrated into product development. Methods A case study of the development of a new medical imaging device was conducted to examine in detail how users were involved in a medical device development project. Two user research studies were conducted: a requirements elicitation interview study and an early prototype evaluation using contextual inquiry. A descriptive in situ approach was taken to investigate how these studies contributed to the product development process and how the results of this work influenced the development of the technology. Data was collected qualitatively through interviews with the development team, participant observation at development meetings and document analysis. The focus was on investigating the barriers that exist to prevent user data from being integrated into product development. Results A number of individual, organisational and system barriers were identified that functioned to prevent the results of the user research being fully integrated into development. The user and technological aspects of development were seen as separate work streams during development. The expectations of the developers were that user research would collect requirements for the appearance of the device, rather than challenge its fundamental concept. The manner that the user data was communicated to the development team was not effective in conveying the significance or breadth of the findings. Conclusion There are a range of informal and formal organisational processes that can affect the uptake of user data during medical device development. Adopting formal decision making processes may assist manufacturers to take a more integrated and reflective approach to development, which should result in improved business decisions and a higher quality end product. PMID:22812565

Working for America: A Federal Employee Survey

DTIC Science & Technology

1990-06-01

take concerning these is- developed and trained; restructuring the Federal sues. employees ’ health insurance program ; increasing 2 A Report by the U.S...we do that is by periodically conducting surveys of the employees in that system. In developing this questionnaire, we received assistance from...AD-A234 177 I WORKING FOR AMERICA: A FEDERAL EMPLOYEE SURVEY A SPECIAL STUDY (2 THE CHAIRMAN U.S. MERIT SYSTEMS PROTECTION BOARD 1120 Vermont Avenue

Heavy physical work under time pressure: the garbage collection service--a case study.

PubMed

Camada, Ilza Mitsuko de Oliveira; Pataro, Silvana Maria Santos; Fernandes, Rita de Cássia Pereira

2012-01-01

The increased generation of garbage has become a problem in large cities, with greater demand for collection services. The collector is subjected to high workload. This study describes the work in garbage collection service, highlighting the requirements of time, resulting in physical and psychosocial demands to collectors. Ergonomic Work Analysis (EWA) - a method focused on the study of work in real situations was used. Initially, technical visits, global observations and unstructured interviews with different subjects of a garbage collection company were conducted. The following step of the systematic observations was accompanied by interviews conducted during the execution of tasks, inquiring about the actions taken, and also interviews about the actions, but conducted after the development of the tasks, photographic records and audiovisual recordings, of workers from two garbage collection teams. Contradictions between the prescribed work and activities (actual work) were identified, as well as the variability present in this process, and strategies adopted by these workers to regulate the workload. It was concluded that the insufficiency of means and the organizational structure of management ensue a situation where the collection process is maintained at the expense of hyper-requesting these workers, both physically and psychosocially.

A Systematic Study of Explosions in Core Collapse Supernovae

NASA Technical Reports Server (NTRS)

Swesty, F. Douglas; Mihalas, Dimitri; Norman, Michael

1997-01-01

This report covers the research conducted from September 1996 to August 1997 (eighteen months into the three year grant). We have obtained a number of significant findings based on the on the work that we have conducted under this grant during the past year. As we stated in our original proposal the work has focused on multi-dimensional models of the convective epoch in core collapse supernovae. During the past year we have developed a large number of models of the convective epoch in 2-D under two levels of neutrino transport approximation and we are currently working on 3-D models. In the following pages will endeavor to give brief descriptions of our results.

Hospital nurses' wellbeing at work: a theoretical model.

PubMed

Utriainen, Kati; Ala-Mursula, Leena; Kyngäs, Helvi

2015-09-01

To develop a theoretical model of hospital nurses' wellbeing at work. The concept of wellbeing at work is presented without an exact definition and without considering different contents. A model was developed in a deductive manner and empirical data collected from nurses (n = 233) working in a university hospital. Explorative factor analysis was used. The main concepts were: patients' experience of high-quality care; assistance and support among nurses; nurses' togetherness and cooperation; fluent practical organisation of work; challenging and meaningful work; freedom to express diverse feelings in the work community; well-conducted everyday nursing; status related to the work itself; fair and supportive leadership; opportunities for professional development; fluent communication with other professionals; and being together with other nurses in an informal way. Themes included: collegial relationships; enhancing high-quality patient care; supportive and fair leadership; challenging, meaningful and well organised work; and opportunities for professional development. Object-dependent wellbeing was supported. Managers should focus on strengthening the positive aspect of wellbeing at work, focusing on providing fluently organised work practices, fair and supportive leadership and togetherness while allowing nurses to implement their own ideas and promote the experience of meaningfulness. © 2014 John Wiley & Sons Ltd.

Reminiscence work with older people: the development of a historical reminiscence tool.

PubMed

Thorgrimsdottir, Sigrun Huld; Bjornsdottir, Kristin

2016-03-01

(i) To explore how reminiscence workers in older people's care define their work and (ii) to describe the development of a historical reminiscence tool containing historical developments from the older person's passage through life, intended to support reminiscence work. Reminiscence work refers to the recall of past occurrences in a client's life with the intention of enhancing well-being, social skills and self-image. The design of the historical reminiscence tool was informed by the model of intervention design developed by van Meijel et al. starting with problem definition followed by the accumulation of building blocks for the intervention, the design of the intervention and, lastly, a validation of the intervention. Two studies were designed to develop the historical reminiscence tool. Study 1 was a focus group interview, conducted in 2008, aimed at generating knowledge about current practice and to develop the historical reminiscence tool. Eighteen women who identified themselves as reminiscence workers participated in three focus groups. Study 2 was a telephone survey, conducted in 2012 by the first author, serving the purpose of validation. The results provided information about the use of such a historical reminiscence tool. Participants understood reminiscence work primarily as meaningful activity, working with personal experience and honouring the individual's memories and life story. The historical reminiscence tool containing information about important historical events and everyday life in the period 1925-1955 was welcomed by the participants. They provided numerous suggestions for improvement of the draft. Reminiscence work in Iceland is of the social or meaningful activity type rather than a therapy. A historical reminiscence tool containing pertinent historical information was considered helpful in strengthening reminiscence workers' knowledge of the social and historical background of their clients and person-centred care. Reminiscence tools, such as books or electronic sources containing historical information pertaining to aging individuals, can enhance the care of older people. © 2015 John Wiley & Sons Ltd.

Landslide study at Sacele reservoir in Romania

NASA Astrophysics Data System (ADS)

Cannata, Massimiliano; Ambrosi, Christian; Spataro, Alessio; Martin, James; Olgun, Guney

2010-05-01

Sacele reservoir is locate on the river Tàrlung, about 3 Km upstream from Sacele and about 12 Km from Brasov (Romania). It represents the main drinking water source for Brasov. The Sacele reservoir is recognized as a dam of exceptional importance and therefore it requires special surveillance. In the East side of the basin, in proximity of the barrage, the slope shows evidences of instability; for this reason stabilization works, mainly consisting in re-profiling the slope, and drainage installation, has been conducted without success. This study, financed by the World Bank, aims to provide important information for the estabilishment of an authomatic monitoring system able to reduce the existing risk. Conducted studies includes: - analysis of existing informations - data acquisition by mean of field survey (geodetical and gelogical) and in situ investigation (boreholes, geophisical, sample test) - developement of GIS based geological model - developement of landslide models based on FLAC and FLAC3D Finally the model results leading to the identification of the triggering factors are discussed. The conducted work is a comprehensive study (from data to models) that highligth some interesting conclusions showing how the "stabilization" works increased total displacements and shear strain, and produced a new deeper cinematic.

The many faces of sex work

PubMed Central

Harcourt, C; Donovan, B

2005-01-01

Objective: To compile a global typography of commercial sex work. Methods: A Medline search and review of 681 "prostitution" articles was conducted. In addition, the investigators pooled their 20 years of collected papers and monographs, and their observations in more than 15 countries. Arbitrary categories were developed to compile a workable typology of sex work. Results: At least 25 types of sex work were identified according to worksite, principal mode of soliciting clients, or sexual practices. These types of work are often grouped under the headings of "direct" and "indirect" prostitution, with the latter group less likely to be perceived or to perceive themselves as sex workers. In general, policing sex work can change its typology and location but its prevalence is rarely affected. The public health implications of sex work vary widely. Conclusion: Developing comprehensive sexual health promotion programmes requires a complete understanding of the types of sex work in a particular area. This study provides a checklist for developing appropriate and targeted programmes. PMID:15923285

Development of requirements and functional specifications for crash event data recorders : final report

DOT National Transportation Integrated Search

2004-12-01

The U.S. DOT has conducted research on the requirements for a Crash Event Data Recorder to facilitate the reconstruction of commercial motor vehicle crashes. This report documents the work performed on the Development of Requirements and Functiona...

Development and Validation of Supervisory Behaviour Description Scale

ERIC Educational Resources Information Center

Unal, Ali

2013-01-01

The aim of this study is to develop a scale which will describe how education supervisors' behaviours are perceived. Four separate studies have been conducted in order to develop the scale. In the first study the scale that was developed is applied to a working group consisting of 704 teachers. The factor structure of the scale is examined by…

Lead Research and Development Activity for DOE's High Temperature, Low Relative Humidity Membrane Program (Topic 2)

DOE Office of Scientific and Technical Information (OSTI.GOV)

James Fenton, PhD; Darlene Slattery, PhD; Nahid Mohajeri, PhD

2012-09-05

The Department of Energy’s High Temperature, Low Relative Humidity Membrane Program was begun in 2006 with the Florida Solar Energy Center (FSEC) as the lead organization. During the first three years of the program, FSEC was tasked with developing non-Nafion® proton exchange membranes with improved conductivity for fuel cells. Additionally, FSEC was responsible for developing protocols for the measurement of in-plane conductivity, providing conductivity measurements for the other funded teams, developing a method for through-plane conductivity and organizing and holding semiannual meetings of the High Temperature Membrane Working Group (HTMWG). The FSEC membrane research focused on the development of supportedmore » poly[perfluorosulfonic acid] (PFSA) – Teflon membranes and a hydrocarbon membrane, sulfonated poly(ether ether ketone). The fourth generation of the PFSA membrane (designated FSEC-4) came close to, but did not meet, the Go/No-Go milestone of 0.1 S/cm at 50% relative humidity at 120 °C. In-plane conductivity of membranes provided by the funded teams was measured and reported to the teams and DOE. Late in the third year of the program, DOE used this data and other factors to decide upon the teams to continue in the program. The teams that continued provided promising membranes to FSEC for development of membrane electrode assemblies (MEAs) that could be tested in an operating fuel cell. FSEC worked closely with each team to provide customized support. A logic flow chart was developed and discussed before MEA fabrication or any testing began. Of the five teams supported, by the end of the project, membranes from two of the teams were easily manufactured into MEAs and successfully characterized for performance. One of these teams exceeded performance targets, while the other requires further optimization. An additional team developed a membrane that shows great promise for significantly reducing membrane costs and increasing membrane lifetime.« less

Continuing professional development for volunteers working in palliative care in a tertiary care cancer institute in India: a cross-sectional observational study of educational needs.

PubMed

Deodhar, Jayita Kedar; Muckaden, Mary Ann

2015-01-01

Training programs for volunteers prior to their working in palliative care are well-established in India. However, few studies report on continuing professional development programs for this group. To conduct a preliminary assessment of educational needs of volunteers working in palliative care for developing a structured formal continuing professional development program for this group. Cross-sectional observational study conducted in the Department of Palliative Medicine of a tertiary care cancer institute in India. Participant volunteers completed a questionnaire, noting previous training, years of experience, and a comprehensive list of topics for inclusion in this program, rated in order of importance according to them. Descriptive statistics for overall data and Chi-square tests for categorical variables for group comparisons were applied using Statistical Package for Social Sciences version 18. Fourteen out of 17 volunteers completed the questionnaire, seven having 5-10-years experience in working in palliative care. A need for continuing professional development program was felt by all participants. Communication skills, more for children and elderly specific issues were given highest priority. Spiritual-existential aspects and self-care were rated lower in importance than psychological, physical, and social aspects in palliative care. More experienced volunteers (>5 years of experience) felt the need for self-care as a topic in the program than those with less (<5-years experience) (P < 0.05). Understanding palliative care volunteers' educational needs is essential for developing a structured formal continuing professional development program and should include self-care as a significant component.

Working Smart: The Los Angeles Workplace Literacy Project. Final Report.

ERIC Educational Resources Information Center

Los Angeles Unified School District, CA. Div. of Adult and Occupational Education.

The Working Smart workplace literacy project was sponsored by a public school district and several profit and nonprofit companies and conducted for the hotel and food industry in the Los Angeles area. Literacy instruction was merged with job requirements of the customer service job classifications. Videodisc courseware was developed, as were…

Energy Systems Integration News | Energy Systems Integration Facility |

Science.gov Websites

share and use information. NREL received the award for work it conducted with EPRI to demonstrate the data for residents, appraisers, and investors. Recognizing this, Denver developer iUnit is working with the use of distributed energy resources such as PV rooftop systems. Such advancements in

Reading, Writing, and Conducting Inquiry about Science in Kindergarten

ERIC Educational Resources Information Center

Patrick, Helen; Mantzicopoulos, Panayota; Samarapungavan, Ala

2009-01-01

Over the past three years, the authors have worked with kindergarten teachers to develop study units with sequences of integrated science inquiry and literacy activities appropriate for kindergartners. Their work, which is part of the Scientific Literacy Project, has been very successful. The success of the Scientific Literacy Project (SLP) is in…

Survey of Working Conditions. Final Report on Univariate and Bivariate Tables.

ERIC Educational Resources Information Center

Michigan Univ., Ann Arbor. Survey Research Center.

A nationwide survey of employed persons was conducted to provide information on labor standards problems, assess the impact of working conditions on workers, develop job satisfaction measures, and establish statistics for similar data collections. The survey revealed that the majority of workers expressed satisfaction with their jobs but they also…

Modification of the Affective Work Competencies Inventory for Use with Vocational Students.

ERIC Educational Resources Information Center

Beach, David P.

A project was conducted to determine whether a vocational student's version of the Affective Work Competencies Inventory could be prepared to measure the psychological constructs of values, habits, and attitudes. A revised inventory was developed and administered to 194 students in eight selected programs at Toledo vocational high schools (data…

The Heat Is On! Using a Stylised Graph to Engender Understanding

ERIC Educational Resources Information Center

Fitzallen, Noleine; Watson, Jane; Wright, Suzie

2017-01-01

When working within a meaningful context quite young students are capable of working with sophisticated data. Year 3 students investigate thermal insulation and the transfer of heat in a STEM inquiry, developing skills in measuring temperature by conducting a statistical investigation, and using a stylised graph to interpret their data.

Field Note-Developing Suicide Risk Assessment Training for Hospital Social Workers: An Academic-Community Partnership

ERIC Educational Resources Information Center

Wharff, Elizabeth A.; Ross, Abigail M.; Lambert, Susan

2014-01-01

This article describes 1 large urban pediatric hospital's partnership with a university to provide suicide assessment and management training within its social work department. Social work administrators conducted a department-wide needs assessment and implemented a 2-session suicide assessment training program and evaluation. Respondents…

UNIVERSALITY AND EVOLUTION OF BASIC COLOR TERMS. WORKING PAPER NUMBER 1.

ERIC Educational Resources Information Center

BERLIN, BRENT; KAY, PAUL

THE RESEARCH REPORTED IN THIS WORKING PAPER "STRONGLY INDICATES" THAT SEMANTIC UNIVERSALS HAVE BEEN DISCOVERED IN THE DOMAIN OF COLOR VOCABULARY. MOREOVER, THESE UNIVERSALS APPEAR TO BE RELATED TO THE HISTORICAL DEVELOPMENT OF ALL LANGUAGES IN A WAY THAT CAN PROPERLY BE TERMED EVOLUTIONARY. THE RESEARCH WAS CONDUCTED IN A GRADUATE…

Juggling and Struggling: A Preliminary Work-Life Study of Mothers with Adolescents Who Have Developmental Disabilities

ERIC Educational Resources Information Center

Parish, Susan L.

2006-01-01

A focus group study was conducted to develop an understanding of the experiences of mothers who are trying to balance employment with caring for an adolescent with developmental disabilities. Mothers reported facing considerable difficulties balancing work and caregiving responsibilities because support services rapidly declined when their child…

Life Affirming Work and Social Justice. Symposium.

ERIC Educational Resources Information Center

2002

This document contains three papers from a symposium on life-affirming work and social justice that was conducted as part of a conference on human resource development (HRD). "Doing Good or Doing Well? A Counter-story of Continuing Professional Education (CPE)" (Laurel Jeris, Linda Armacost) reports on an exploratory study in which a…

Environmental Scan: Literacy Work in Canada. Summary Report

ERIC Educational Resources Information Center

Movement for Canadian Literacy, 2007

2007-01-01

During the fall of 2007, Movement for Canadian Literacy (MCL) conducted an environmental scan of the Anglophone literacy field in Canada. Data was gathered through the use of key informant interviews (19) and a literature review. A cross-national working group guided the development of the scan. Interviews with key informants for the scan revealed…

Carl Rogers's Life and Work: An Assessment on the 100Th Anniversary of His Birth

ERIC Educational Resources Information Center

Kirschenbaum, Howard

2004-01-01

This article summarizes the life and work of America's most influential counselor and psychotherapist, Carl Rogers. He developed the client-centered, person-centered approach; popularized the term client; pioneered the recording of counseling cases; conducted landmark research on counseling and psychotherapy; and was a leader in the humanistic…

Curriculum Development for the Tourism Option of the Hospitality, Restaurant Management Program. Final Report.

ERIC Educational Resources Information Center

Walk, Mary

A project was undertaken to develop classroom materials for a tourism program that would integrate work experience and classroom instruction. After reviewing available literature, conferring with other educators, and conducting a series of interviews with persons employed in the hospitality industry, the researcher developed a set of instructional…

Technology development for iron Fischer-Tropsch catalysts

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Brien, R.J.; Raje, A.; Keogh, R.A.

1995-12-31

The objective of this research project is to develop the technology for the production of physically robust iron-based Fischer-Tropsch catalysts that have suitable activity, selectivity and stability to be used in the slurry phase synthesis reactor development. The catalysts that are developed shall be suitable for testing in the Advanced Fuels Development Facility at LaPorte, Texas, to produce either low-or high-alpha product distributions. Previous work by the offeror has produced a catalyst formulation that is 1.5 times as active as the {open_quotes}standard-catalyst{close_quotes} developed by German workers for slurry phase synthesis. In parallel, work will be conducted to design a high-alphamore » iron catalyst this is suitable for slurry phase synthesis. Studies will be conducted to define the chemical phases present at various stages of the pretreatment and synthesis stages and to define the course of these changes. The oxidation/reduction cycles that are anticipated to occur in large, commercial reactors will be studied at the laboratory scale. Catalyst performance will be determined for catalysts synthesized in this program for activity, selectivity and aging characteristics.« less

Using Live Cases for Teaching, Industry Collaboration, and Research

ERIC Educational Resources Information Center

Laukkanen, Mikko; Mattila, Pekka; Salo, Jari; Tikkanen, Henrikki

2013-01-01

The use of live cases in marketing teaching has been suggested as a way to provide students with interesting and relevant course work while collaborating on live case exercises also provides industry partners with valuable new ideas for innovation and development. When properly conducted, live cases can also be used for conducting research by the…

A Journalist's Education Never Ends: Opportunities for Continuation of the Learning Process Through Mid-Career.

ERIC Educational Resources Information Center

De Mott, John

For many years, a considerable number of the more progressive colleges and universities in the United States have been involved in conducting inservice training institutes or similar programs for working journalists. One of the pioneers in professional development for newspeople is the American Press Institute, which conducts an annual series of…

A quantum theoretical study of polyimides

NASA Technical Reports Server (NTRS)

Burke, Luke A.

1987-01-01

One of the most important contributions of theoretical chemistry is the correct prediction of properties of materials before any costly experimental work begins. This is especially true in the field of electrically conducting polymers. Development of the Valence Effective Hamiltonian (VEH) technique for the calculation of the band structure of polymers was initiated. The necessary VEH potentials were developed for the sulfur and oxygen atoms within the particular molecular environments and the explanation explored for the success of this approximate method in predicting the optical properties of conducting polymers.

Report on Development of CFEA (Collective Front-End Analysis) Procedures: Specification of CFEA Model & Results of the HAWK CFEA

DTIC Science & Technology

1985-03-01

0423 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT, PROJECT, TASK AREA & WORK UNIT NUMBERSApplied Science Associates, Inc. AREAOU U...the workload on the user and help organize the massive amounts of data involved, job aids have been developed for CFEA users. A trial CFEA was conducted...coupled with the complex and massive nature of a CFEA of a battalion-sized [ organization could make the prospect of conducting a CFEA seem a bit over

U.S. Geological Survey Science for the Wyoming Landscape Conservation Initiative-2009 Annual Report

USGS Publications Warehouse

Bowen, Zachary H.; Aldridge, Cameron L.; Anderson, Patrick J.; Assal, Timothy J.; Biewick, Laura R. H.; Blecker, Steven W.; Bristol, R. Sky; Carr, Natasha B.; Chalfoun, Anna D.; Chong, Geneva W.; Diffendorfer, James E.; Fedy, Bradley C.; Garman, Steven L.; Germaine, Stephen; Grauch, Richard I.; Holloway, JoAnn M.; Homer, Collin G.; Kauffman, Matthew J.; Keinath, Douglas; Latysh, Natalie; Manier, Daniel J.; McDougal, Robert R.; Melcher, Cynthia P.; Miller, Kirk A.; Montag, Jessica; Nutt, Constance J.; Potter, Christopher J.; Sawyer, Hall; Schell, Spencer; Shafer, Sarah L.; Smith, David B.; Stillings, Lisa L.; Tuttle, Michele L.W.; Wilson, Anna B.

2010-01-01

This is the second report produced by the U.S. Geological Survey (USGS) for the Wyoming Landscape Conservation Initiative (WLCI) to detail annual work activities. The first report described work activities for 2007 and 2008; this report covers work activities conducted in 2009. Important differences between the two reports are that (1) this report does not lump all the Effectiveness Monitoring activities together as last year's report did, which will allow WLCI partners and other readers to fully appreciate the scope and accomplishments of those activities, and (2) this report does not include a comprehensive appendix of the background details for each work activity. In 2009, there were 29 ongoing or completed activities, and there were 5 new work activities conducted under the 5 original major multi-disciplinary science and technical assistance activities: (1) Baseline Synthesis; (2) Targeted Monitoring and Research; (3) Data and Information Management; (4) Integration and Coordination; and (5) Decisionmaking and Evaluation. New work included (1) developing a soil-quality index, (2) developing methods for assessing levels of and relationships between mercury and soil organic matter, and (3) ascertaining element source, mobility, and fate. Additionally, (4) remotely sensed imagery was used to assess vegetation as an indicator of soil condition and geology, and (5) an Integrated Assessment (IA) was initiated to synthesize what has been learned about WLCI systems to date, and to develop associated decision tools, maps, and a comprehensive report.

Acts of Discovery: Using Collaborative Research to Mobilize and Generate Knowledge about Visual Arts Teaching Practice

ERIC Educational Resources Information Center

Mitchell, Donna Mathewson

2014-01-01

Visual arts teachers engage in complex work on a daily basis. This work is informed by practical knowledge that is rarely examined or drawn on in research or in the development of policy. Focusing on the work of secondary visual arts teachers, this article reports on a research program conducted in a regional area of New South Wales, Australia.…

Updated Perspectives on Educational Diagnosticians' Understanding of Reading Assessments

ERIC Educational Resources Information Center

Rueter, Jessica A.; McWhorter, Rochell R.; Lamb, John H.; Dykes, Frank O.

2016-01-01

Chappell, Stephens, Kinnison, and Pettigrew (2009) conducted a study investigating educational diagnosticians knowledge of early reading development. Our study replicated the work of Chappell et al. through a mixed methods design that investigated educational diagnosticians' perceptions and knowledge of early reading development. Additionally, our…

Using protection motivation theory and formative research to guide an injury prevention intervention: increasing adherence to the North American Guidelines for Children's Agricultural Tasks.

PubMed

Ashida, Sato; Heaney, Catherine A; Kmet, Jennifer M; Wilkins, J R

2011-05-01

The North American Guidelines for Children's Agricultural Tasks (NAGCAT) were developed to reduce childhood agricultural injuries by assisting adults in assigning appropriate chores and providing needed supervision and training. To develop an effective intervention to increase adherence to NAGCAT among farm parents, formative research (focus groups and pilot-testing) was conducted. Protection motivation theory (PMT) was used to guide this research and inform intervention development. Focus group results suggested how PMT constructs might be addressed to increase adherence. A home visit intervention, using a standardized presentation in POWERPoint™, was developed to (a) introduce NAGCAT, (b) increase motivation to use NAGCAT and enhance safe work behaviors, and (c) ultimately reduce agricultural work-related injuries among youth. Process evaluation data suggests that the intervention was well received by farm parents. Conducting theory-guided formative research identified motivational barriers and strategies for overcoming these barriers that might not have been otherwise apparent.

Vega-Constellation Tools to Analize Hyperspectral Images

NASA Astrophysics Data System (ADS)

Savorskiy, V.; Loupian, E.; Balashov, I.; Kashnitskii, A.; Konstantinova, A.; Tolpin, V.; Uvarov, I.; Kuznetsov, O.; Maklakov, S.; Panova, O.; Savchenko, E.

2016-06-01

Creating high-performance means to manage massive hyperspectral data (HSD) arrays is an actual challenge when it is implemented to deal with disparate information resources. Aiming to solve this problem the present work develops tools to work with HSD in a distributed information infrastructure, i.e. primarily to use those tools in remote access mode. The main feature of presented approach is in the development of remotely accessed services, which allow users both to conduct search and retrieval procedures on HSD sets and to provide target users with tools to analyze and to process HSD in remote mode. These services were implemented within VEGA-Constellation family information systems that were extended by adding tools oriented to support the studies of certain classes of natural objects by exploring their HSD. Particular developed tools provide capabilities to conduct analysis of such objects as vegetation canopies (forest and agriculture), open soils, forest fires, and areas of thermal anomalies. Developed software tools were successfully tested on Hyperion data sets.

An Alternate Set of Basis Functions for the Electromagnetic Solution of Arbitrarily-Shaped, Three-Dimensional, Closed, Conducting Bodies Using Method of Moments

NASA Technical Reports Server (NTRS)

Mackenzie, Anne I.; Baginski, Michael E.; Rao, Sadasiva M.

2008-01-01

In this work, we present an alternate set of basis functions, each defined over a pair of planar triangular patches, for the method of moments solution of electromagnetic scattering and radiation problems associated with arbitrarily-shaped, closed, conducting surfaces. The present basis functions are point-wise orthogonal to the pulse basis functions previously defined. The prime motivation to develop the present set of basis functions is to utilize them for the electromagnetic solution of dielectric bodies using a surface integral equation formulation which involves both electric and magnetic cur- rents. However, in the present work, only the conducting body solution is presented and compared with other data.

Development of a dry actuation conducting polymer actuator for micro-optical zoom lenses

NASA Astrophysics Data System (ADS)

Kim, Baek-Chul; Kim, Hyunseok; Nguyen, H. C.; Cho, M. S.; Lee, Y.; Nam, Jae-Do; Choi, Hyouk Ryeol; Koo, J. C.; Jeong, H.-S.

2008-03-01

The objective of the present work is to demonstrate the efficiency and feasibility of NBR (Nitrile Butadiene Rubber) based conducting polymer actuator that is fabricated into a micro zoon lens driver. Unlike the traditional conducting polymer that normally operates in a liquid, the proposed actuator successfully provides fairly effective driving performance for the zoom lens system in a dry environment. And this paper is including the experiment results for an efficiency improvement. The result suggested by an experiment was efficient in micro optical zoom lens system. In addition, the developed design method of actuator was given consideration to design the system.

Typology of older female sex workers and sexual risks for HIV infection in China: a qualitative study

PubMed Central

Hao, Chun; Sherman, Susan G.; Jiang, Baofa; Li, Xiaojing; Xu, Yongfang; Jiang, Zhenxia; Zang, Chunpeng

2013-01-01

The HIV epidemic continues to develop among older adults in China, including older female sex workers. Yet, few studies have been conducted among this relatively hidden population. The objectives of this study were to investigate the reasons for women's entry into sex work during their thirties and to develop typology of older women sex workers. Semi-structured in-depth interviews with sixty-three older women sex workers and six focus groups interviews with stakeholders were conducted in three cities in China in 2012. Data were analysed inductively using constant comparative method. The mean age of participants was 43 years old and the mean age of entry into sex work was 39 years old. The primary reasons for entry into sex work include heavy economic burdens, limited employment opportunities, and the appealing nature of sex work. Street-based and venue-based older sex workers were identified based on where they solicited clients. Street-based older sex workers were more likely to engage in unsafe commercial sex due to financial incentives, whereas those in entertainment venues were unlikely to use condoms with regular clients. The development of effective HIV interventions needs to consider older women sex workers unique characteristics and target factors that impede safer sex practices. PMID:23998493

Critical Thinking through Writing: Expressing Scientific Thought and Process in a Deaf Classroom

NASA Astrophysics Data System (ADS)

Manjarrez, Leslie

Within Deaf classrooms there is often a disconnect between academic areas and writing curriculums that develop in both common and academic language, where often classrooms focus solely on writing as a skill rather than as a method for producing language through an academic area. This work focuses on the development of academic language in ASL and English print of science. The curriculum is written to be implemented as a bilingual academic curriculum to support Deaf and Hard of Hearing students in various self contained classroom settings. Lessons are conducted in three Units, A B and C. Unit A focuses on research, thought and writing of preparatory materials in small groups. Unit B is comprised of procedural lessons on conducting x experiments and the evaluation of those experiments through mathematics. Unit C is a group of lessons that ties together Units A and B through writing and peer teaching as a method of concluding the work and presenting information in an effective manner. The success of the project was evaluated on the basis of student work, rubrics, and final works from the students. The results showed promise in aspects of Critical Thinking, writing development, and expression of new concepts in both ASL and English.

Ion conduction in high ion content PEO-based ionomers

NASA Astrophysics Data System (ADS)

Caldwell, David, II; Maranas, Janna

Solid Polymer Electrolytes (SPEs) can enable the design of batteries that are safer and have higher capacity than batteries with traditional volatile organic electrolytes. The current limitation for SPEs is their low conductivity, resulting from a conduction mechanism strongly coupled to the dynamics of the polymer host matrix. Our previous work indicated the possibility of a conduction mechanism through the use of ion aggregates. In order to investigate this mechanism, we performed a series of molecular dynamics simulations of PEO-based ionomers at high ion content. Our results indicate that conduction through ion aggregates are partially decoupled from polymer dynamics and could enable the development of higher conductive SPEs.

[Development process of Evidence-based "Return-to-work Guidance in Occupational Health 2017"].

PubMed

Kojimahara, Noriko; Fukumoto, Masakatsu; Yoshikawa, Etsuko; Shinada, Kayoko; Tsuiki, Hirokazu

2018-06-05

Objective"Return-to-work Guidance in Occupational Health 2017 (RTW Guidance 2017) " is the first occupational health guide in Japan that evaluates the quality of evidence and offers recommendations based on results of the systematic review of randomized controlled trials. Details of the systematic review of each review question (RQs) will be described separately. This article presents an overview of the method and process of developing the "RTW Guidance 2017."Materials and MethodsThe guidance was developed following the previously-published "Method for developing evidence based occupational health guidance," which included the composition of a highly-transparent guidance developing group as well as the recruitment and selection of RQs. Using the Cochrane Library, PubMed, and Ichushi-Web, a literature search for the six RQs was conducted in January 2016 by partly modifying the search terms of the existing systematic review. Articles were selected according to the inclusion criteria, and the quality of evidence was evaluated using the GRADE approach. Meta-analysis was conducted for RQ2 and RQ4, and a qualitative systematic review was conducted for RQ5, RQ6, and cost-effectiveness. Recommendations were subsequently made after a thorough consideration for feasibility in Japan by examining the costs and available resources.ResultsBased on a comprehensive literature search, eleven RQ2, four RQ4, one RQ5, and three RQ6 were selected. Support program for returning to work, such as "Re-work" for those who are temporarily not working due to musculoskeletal disorders or mental health disorder, was recommended based on moderate evidence (RQ2). For RQ4, the collaboration between occupational health practice and clinical practice was weakly recommended based on low evidence. For RQ5 that evaluated the usefulness of social support, intervention by the manager/co-worker was proposed as a "best practice statement" without indicating it as a recommendation. Work accommodation was weakly recommended based on low evidence in RQ6.Discussion and ConclusionFrom the result of systematic reviews, it was recommended for workers on sick leave more than four weeks regardless of sick leave and sickness absence that interventions during leave would improve work-related outcomes, such as earlier reinstatement. Although there is limited evidence regarding occupational health in Japan, it is important for many occupational health professionals to learn the method of developing guidance and to identify issues for future studies with priority in Japan.

USL/DBMS NASA/RECON working paper series. Standards

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Chum, Frank Y.

1984-01-01

The USL/DBMS NASA/RECON Working Paper Series contains a collection of reports representing results of activities being conducted by the Computer Science Department of the University of Southwestern Louisiana pursuant to the specifications of NASA Contract number NASw-3846. The work on this portion of the contract is being performed jointly by the University of Southwestern Louisiana and Southern University. This report contains the full set of standards for the development, formatting, reviewing, and issuance of entries within the USL/DBMS NASA/RECON Working Paper Series.

Tunneling conductance of amine-linked alkyl chains.

PubMed

Prodan, Emil; Car, Roberto

2008-06-01

The tunneling transport theory developed in ref 9 (Phys. Rev. B 2007, 76, 115102) is applied to molecular devices made of alkyl chains linked to gold electrodes via amine groups. Using the analytic expression of the tunneling conductance derived in our previous work, we identify the key physical quantities that characterize the conductance of these devices. By investigating the transport characteristics of three devices, containing four, six, and eight methyl groups, we extract the dependence of the tunneling conductance on the chain's length, which is an exponential decay law in agreement with recent experimental data.

Shared services centers and work sustainability: which contributions from ergonomics?

PubMed

Arnoud, Justine; Falzon, Pierre

2012-01-01

This study examines the way in which Shared Services Centers (SSCs) were implemented in a French multinational company. It aims to characterize the change according to the capabilities model developed by Amartya Sen: what are the effects of SSCs in terms of capabilities development and developmental quality of work, i.e. in the enabling potential of work? A 3-step methodology has been used: first, an investigation was conducted in a pay service of a local entity moving into SSC in 2013; second, two investigations were conducted in another pay service of a SSC: first, a few months after the change, and then, one year after the change (the same operators were interviewed). Results show a tendency to the decrease of the enabling potential. Additionally, it was noted that administrators are kept away from the design process and have to struggle with inappropriate rules. The efficiency and sustainability of the SSC are questioned; in this context, the human factor specialist has an important role to play.

Determination of water saturation using gas phase partitioning tracers and time-lapse electrical conductivity measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Timothy C.; Oostrom, Martinus; Truex, Michael J.

2013-05-21

Water saturation is an important indicator of contaminant distribution and plays a governing role in contaminant transport within the vadose zone. Understanding the water saturation distribution is critical for both remediation and contaminant flux monitoring in unsaturated environments. In this work we propose and demonstrate a method of remotely determining water saturation levels using gas phase partitioning tracers and time-lapse bulk electrical conductivity measurements. The theoretical development includes the partitioning chemistry for the tracers we demonstrate (ammonia and carbon dioxide), as well as a review of the petrophysical relationship governing how these tracers influence bulk conductivity. We also investigate methodsmore » of utilizing secondary information provided by electrical conductivity breakthrough magnitudes induced by the tracers. We test the method on clean, well characterized, intermediate-scale sand columns under controlled conditions. Results demonstrate the capability to predict partitioning coefficients and accurately monitor gas breakthrough curves along the length of the column according to the corresponding electrical conductivity response, leading to accurate water saturation estimates. This work is motivated by the need to develop effective characterization and monitoring techniques for contaminated deep vadose zone environments, and provides a proof-of-concept toward uniquely characterizing and monitoring water saturation levels at the field scale and in three-dimensions using electrical resistivity tomography.« less

Job Satisfaction, Organizational Commitment and Job Involvement: The Mediating Role of Job Involvement

PubMed Central

Ćulibrk, Jelena; Delić, Milan; Mitrović, Slavica; Ćulibrk, Dubravko

2018-01-01

We conducted an empirical study aimed at identifying and quantifying the relationship between work characteristics, organizational commitment, job satisfaction, job involvement and organizational policies and procedures in the transition economy of Serbia, South Eastern Europe. The study, which included 566 persons, employed by 8 companies, revealed that existing models of work motivation need to be adapted to fit the empirical data, resulting in a revised research model elaborated in the paper. In the proposed model, job involvement partially mediates the effect of job satisfaction on organizational commitment. Job satisfaction in Serbia is affected by work characteristics but, contrary to many studies conducted in developed economies, organizational policies and procedures do not seem significantly affect employee satisfaction. PMID:29503623

Job Satisfaction, Organizational Commitment and Job Involvement: The Mediating Role of Job Involvement.

PubMed

Ćulibrk, Jelena; Delić, Milan; Mitrović, Slavica; Ćulibrk, Dubravko

2018-01-01

We conducted an empirical study aimed at identifying and quantifying the relationship between work characteristics, organizational commitment, job satisfaction, job involvement and organizational policies and procedures in the transition economy of Serbia, South Eastern Europe. The study, which included 566 persons, employed by 8 companies, revealed that existing models of work motivation need to be adapted to fit the empirical data, resulting in a revised research model elaborated in the paper. In the proposed model, job involvement partially mediates the effect of job satisfaction on organizational commitment. Job satisfaction in Serbia is affected by work characteristics but, contrary to many studies conducted in developed economies, organizational policies and procedures do not seem significantly affect employee satisfaction.

Final Report - DuraMelter 100 Tests to Support LAW Glass Formulation Correlation Development, VSL-06R6480-1, Rev. 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kruger, Albert A.; Muller, I. S.; Gong, W.

2013-12-03

This report describes the results of work and testing specified by Test Specifications 24590-LAW-TSP-RT-04-004, Rev. 0, Test Plans VSL-05T5480-1, Rev. 0 and Text Exceptions 24590-LAW-TEF-RT-05-00002. The work and any associated testing followed established quality assurance requirements and was conducted as authorized. The descriptions provided in this test report are an accurate account of both the conduct of the work and the data collected. Results required by the Test Plan are reported. Also reported are any unusual or anomalous occurences that are different from the starting hypotheses. The test results and this report have been reviewed and verified.

Paternal psychosocial work conditions and mental health outcomes: A case-control study

PubMed Central

Maggi, Stefania; Ostry, Aleck; Tansey, James; Dunn, James; Hershler, Ruth; Chen, Lisa; Hertzman, Clyde

2008-01-01

Background The role of social and family environments in the development of mental health problems among children and youth has been widely investigated. However, the degree to which parental working conditions may impact on developmental psychopathology has not been thoroughly studied. Methods We conducted a case-control study of several mental health outcomes of 19,833 children of sawmill workers and their association with parental work stress, parental socio-demographic characteristics, and paternal mental health. Results Multivariate analysis conducted with four distinct age groups (children, adolescents, young adults, and adults) revealed that anxiety based and depressive disorders were associated with paternal work stress in all age groups and that work stress was more strongly associated with alcohol and drug related disorders in adulthood than it was in adolescence and young adulthood. Conclusion This study provides support to the tenet that being exposed to paternal work stress during childhood can have long lasting effects on the mental health of individuals. PMID:18377651

From the past to the future: Integrating work experience into the design process.

PubMed

Bittencourt, João Marcos; Duarte, Francisco; Béguin, Pascal

2017-01-01

Integrating work activity issues into design process is a broadly discussed theme in ergonomics. Participation is presented as the main means for such integration. However, a late participation can limit the development of both project solutions and future work activity. This article presents the concept of construction of experience aiming at the articulated development of future activities and project solutions. It is a non-teleological approach where the initial concepts will be transformed by the experience built up throughout the design process. The method applied was a case study of an ergonomic participation during the design of a new laboratory complex for biotechnology research. Data was obtained through analysis of records in a simulation process using a Lego scale model and interviews with project participants. The simulation process allowed for developing new ways of working and generating changes in the initial design solutions, which enable workers to adopt their own developed strategies for conducting work more safely and efficiently in the future work system. Each project decision either opens or closes a window of opportunities for developing a future activity. Construction of experience in a non-teleological design process allows for understanding the consequences of project solutions for future work.

Workforce Issues Facing HRD.

ERIC Educational Resources Information Center

1995

These four papers are from a symposium facilitated by Eugene Andette on work force issues facing human resources development (HRD) at the 1995 Academy of Human Resource Development conference. "Meaning Construction and Personal Transformation: Alternative Dimensions of Job Loss" (Terri A. Deems) reports a study conducted to explore the ways…

The Development of Teacher Assessment Identity through Participation in Online Moderation

ERIC Educational Resources Information Center

Adie, Lenore

2013-01-01

Teachers' professional conversations regarding the qualities evidenced in student work provide opportunities to develop a shared understanding of achievement standards. This research investigates social moderation conducted in a synchronous online mode as a specific form of professional conversation. The discussion considers the different factors…

Combined Release and Radiation Effects Satellite (CRRES) Experiment: Educational planning and coordination

NASA Technical Reports Server (NTRS)

Vaughan, William W.; Alzmann, Melanie

1991-01-01

The efforts conducted to provide educational planning and development support for the Combined Release and Radiation Satellite (CRRES) Experiment are summarized. Activities regarding the scientific working group and workshop development are presented including the preparation of descriptive information on the CRRES Project.

Survey of on-road image projection with pixel light systems

NASA Astrophysics Data System (ADS)

Rizvi, Sadiq; Knöchelmann, Marvin; Ley, Peer-Phillip; Lachmayer, Roland

2017-12-01

HID, LED and laser-based high resolution automotive headlamps, as of late known as `pixel light systems', are at the forefront of the developing technologies paving the way for autonomous driving. In addition to light distribution capabilities that outperform Adaptive Front Lighting and Matrix Beam systems, pixel light systems provide the possibility of image projection directly onto the street. The underlying objective is to improve the driving experience, in any given scenario, in terms of safety, comfort and interaction for all road users. The focus of this work is to conduct a short survey on this state-of-the-art image projection functionality. A holistic research regarding the image projection functionality can be divided into three major categories: scenario selection, technological development and evaluation design. Consequently, the work presented in this paper is divided into three short studies. Section 1 provides a brief introduction to pixel light systems and a justification for the approach adopted for this study. Section 2 deals with the selection of scenarios (and driving maneuvers) where image projection can play a critical role. Section 3 discusses high power LED and LED array based prototypes that are currently under development. Section 4 demonstrates results from an experiment conducted to evaluate the illuminance of an image space projected using a pixel light system prototype developed at the Institute of Product Development (IPeG). Findings from this work can help to identify and advance future research work relating to: further development of pixel light systems, scenario planning, examination of optimal light sources, behavioral response studies etc.

Hierarchical Strategy for Rapid Analysis Environment

NASA Technical Reports Server (NTRS)

Whitcomb, John

2003-01-01

A new philosophy is developed wherein the hierarchical definition of data is made use of in creating a better environment to conduct analyses of practical problems. This system can be adapted to conduct virtually any type of analysis, since this philosophy is not bound to any specific kind of analysis. It provides a framework to manage different models and its results and more importantly, the interaction between the different models. Thus, it is ideal for many types of finite element analyses like globalAoca1 analysis and those that involve multiple scales and fields. The system developed during the course of this work is just a demonstrator of the basic concepts. A complete implementation of this strategy could potentially make a major impact on the way analyses are conducted. It could considerably reduce the time frame required to conduct the analysis of real-life problems by efficient management of the data involved and reducing the human effort involved. It also helps in better decision making because of more ways to interpret the results. The strategy has been currently implemented for structural analysis, but with more work it could be extended to other fields of science when the finite element method is used to solve the differential equations numerically. This report details the work that has been done during the course of this project and its achievements and results. The following section discusses the meaning of the word hierarchical and the different references to the term in the literature. It talks about the development of the finite element method, its different versions and how hierarchy has been used to improve the methodology. The next section describes the hierarchical philosophy in detail and explains the different concepts and terms associated with it. It goes on to describe the implementation and the features of the demonstrator. A couple of problems are analyzed using the demonstrator program to show the working of the system. The two problems considered are two dimensional plane stress analysis problems. The results are compared with those obtained using conventional analysis. The different challenges faced during the development of this system are discussed. Finally, we conclude with suggestions for future work to add more features and extend it to a wider range of problems.

The Development of Professional Competences Using the Interdisciplinary Project Approach with University Students

ERIC Educational Resources Information Center

González-Carrasco, Mònica; Francés Ortega, Jesús; de Castro Vila, Rodolfo; Castañer Vivas, Margarida; San Molina, Joan; Marti Bonmati, Joan

2016-01-01

This work describes an experience conducted by a group of professors from different departments at the University of Girona (Catalonia, Spain) which arose from the need for interdisciplinary work in university classrooms in order to promote competences relevant to the professional sector. As part of this experience, students from different degree…

The Role of the Company in Generating Skills. The Learning Effects of Work Organization. Portugal.

ERIC Educational Resources Information Center

Rodriguez, Maria Joao; Lopes, Helena

The impact of changes in work organization on development of Portugese workers' skills was examined. At the macro level, a national study was conducted to identify current and possible future relationships among initial training, continuing training, the labor market, and industrial relations in Portugal. At the micro level, cases studies of three…

Work Related Stress: Application of a Special Study to the General Business Community.

ERIC Educational Resources Information Center

Gallagher, Denise M.; And Others

There has been much recent attention given to stress and the negative side effects associated with excessive stress. Employers need to recognize the effect that stress can have on the productivity and attitudes of their employees. To examine work-related stress and to develop stress management strategies, a study was conducted of flight attendants…

Methods and Challenges of Analyzing Spatial Data for Social Work Problems: The Case of Examining Child Maltreatment Geographically

ERIC Educational Resources Information Center

Freisthler, Bridget; Lery, Bridgette; Gruenewald, Paul J.; Chow, Julian

2006-01-01

Increasingly, social work researchers are interested in examining how "place" and "location" contribute to social problems. Yet, often these researchers do not use the specialized spatial statistical techniques developed to handle the analytic issues faced when conducting ecological analyses. This article explains the importance of these…

cCRADA | FNLCR Staging

Cancer.gov

A contractor Cooperative Research and Development Agreement(cCRADA) is a partnering mechanism that expands the opportunities for FNLCR’s researchers to work with external parties to conduct collaborative research activities and explore develo

A pyrene formulation for fluorometric visualization of latent fingermarks

NASA Astrophysics Data System (ADS)

Kumari Sharma, Kirti; Harsha Kannikanti, Gavash; Ramachandra Rao Baggi, Tulsidas; Rao Vaidya, Jayathirtha

2018-07-01

Present work is conducted to demonstrate the use of pyrene for the development of latent fingermarks. Pyrene formulation with binders can be efficiently used for developing latent fingermarks on porous, non-porous and semi-porous surfaces. The effectiveness of pyrene formulation for the detection of latent fingermarks present on a large variety of objects was systematically and comparatively carried out. To optimize the working formulation, studies were carried out using different pyrene concentrations followed by various substrate study, time dependent study, temperature study, depleted fingermark development and the stability of the proposed formulation. When illuminated at 366 nm, the developed fingermarks showed clear, high contrast primary, secondary and tertiary level ridge details. This work reveals that the fluorescent molecules having high quantum yield are a versatile fluorescent label and can find their applications in forensic latent fingermark development.

The Relationship between Parental Knowledge and Monitoring and Child and Adolescent Conduct Problems: A 10-Year Update

ERIC Educational Resources Information Center

Racz, Sarah Jensen; McMahon, Robert J.

2011-01-01

Inadequate parental monitoring is widely recognized as a risk factor for the development of child and adolescent conduct problems. However, previous studies examining parental monitoring have largely measured parental knowledge and not the active methods used by parents to track the activities and behavior of their children. The seminal work of…

Tertiary Students' Intention to e-Collaborate for Group Projects: Exploring the Missing Link from an Extended Theory of Planned Behaviour Model

ERIC Educational Resources Information Center

Cheng, Eddie W. L.; Chu, Samuel K. W.; Ma, Carol S. M.

2016-01-01

With the emergence of web technologies, students can conduct their group projects via virtual platforms, which enable online collaboration. However, students' lack of intention to use web technologies for conducting group work has recently been highlighted. Based on the theory of planned behaviour (TPB), this paper developed and examined an…

40 CFR 63.3960 - By what date must I conduct performance tests and other initial compliance demonstrations?

Code of Federal Regulations, 2010 CFR

2010-07-01

... compliance date specified in § 63.3883. For magnet wire coating operations you may, with approval, conduct a performance test of one representative magnet wire coating machine for each group of identical or very similar magnet wire coating machines. (2) You must develop and begin implementing the work practice plan required...

Probing physical properties at the nanoscale using atomic force microscopy

NASA Astrophysics Data System (ADS)

Ditzler, Lindsay Rachel

Techniques that measure physical properties at the nanoscale with high sensitivity are significantly limited considering the number of new nanomaterials being developed. The development of atomic force microscopy (AFM) has lead to significant advancements in the ability to characterize physical properties of materials in all areas of science: chemistry, physics, engineering, and biology have made great scientific strides do to the versatility of the AFM. AFM is used for quantification of many physical properties such as morphology, electrical, mechanical, magnetic, electrochemical, binding interactions, and protein folding. This work examines the electrical and mechanical properties of materials applicable to the field of nano-electronics. As electronic devices are miniaturized the demand for materials with unique electrical properties, which can be developed and exploited, has increased. For example, discussed in this work, a derivative of tetrathiafulvalene, which exhibits a unique loss of conductivity upon compression of the self-assembled monolayer could be developed into a molecular switch. This work also compares tunable organic (tetraphenylethylene tetracarboxylic acid and bis(pyridine)s assemblies) and metal-organic (Silver-stilbizole coordination compounds) crystals which show high electrical conductivity. The electrical properties of these materials vary depending on their composition allowing for the development of compositionally tunable functional materials. Additional work was done to investigate the effects of molecular environment on redox active 11-ferroceneyl-1 undecanethiol (Fc) molecules. The redox process of mixed monolayers of Fc and decanethiol was measured using conductive probe atomic force microscopy and force spectroscopy. As the concentration of Fc increased large, variations in the force were observed. Using these variations the number of oxidized molecules in the monolayer was determined. AFM is additionally capable of investigating interactions at the nanoscale, such as ligand-receptor interactions. This work examines the interactions between the enzyme dihydrofolate reductase (DHFR), a widely investigated enzyme targeted for cancer and antimicrobial pharmaceutical, and methotrexate (MTX), a strong competitive inhibitor of DHFR. The DHFR was immobilized on a gold substrate, bound through a single surface cysteine, and maintained catalytic activity. AFM probe was functionalized with MTX and the interaction strength was measured using AFM. This work highlights the versatility of AFM, specifically force spectroscopy for the quantification of electrical, mechanical, and ligand-receptor interactions at the nanoscale.

A Lithium-Air Battery Stably Working at High Temperature with High Rate Performance.

PubMed

Pan, Jian; Li, Houpu; Sun, Hao; Zhang, Ye; Wang, Lie; Liao, Meng; Sun, Xuemei; Peng, Huisheng

2018-02-01

Driven by the increasing requirements for energy supply in both modern life and the automobile industry, the lithium-air battery serves as a promising candidate due to its high energy density. However, organic solvents in electrolytes are likely to rapidly vaporize and form flammable gases under increasing temperatures. In this case, serious safety problems may occur and cause great harm to people. Therefore, a kind of lithium-air that can work stably under high temperature is desirable. Herein, through the use of an ionic liquid and aligned carbon nanotubes, and a fiber shaped design, a new type of lithium-air battery that can effectively work at high temperatures up to 140 °C is developed. Ionic liquids can offer wide electrochemical windows and low vapor pressures, as well as provide high thermal stability for lithium-air batteries. The aligned carbon nanotubes have good electric and heat conductivity. Meanwhile, the fiber format can offer both flexibility and weavability, and realize rapid heat conduction and uniform heat distribution of the battery. In addition, the high temperature has also largely improved the specific powers by increasing the ionic conductivity and catalytic activity of the cathode. Consequently, the lithium-air battery can work stably at 140 °C with a high specific current of 10 A g -1 for 380 cycles, indicating high stability and good rate performance at high temperatures. This work may provide an effective paradigm for the development of high-performance energy storage devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Summarizing systematic reviews: methodological development, conduct and reporting of an umbrella review approach.

PubMed

Aromataris, Edoardo; Fernandez, Ritin; Godfrey, Christina M; Holly, Cheryl; Khalil, Hanan; Tungpunkom, Patraporn

2015-09-01

With the increase in the number of systematic reviews available, a logical next step to provide decision makers in healthcare with the evidence they require has been the conduct of reviews of existing systematic reviews. Syntheses of existing systematic reviews are referred to by many different names, one of which is an umbrella review. An umbrella review allows the findings of reviews relevant to a review question to be compared and contrasted. An umbrella review's most characteristic feature is that this type of evidence synthesis only considers for inclusion the highest level of evidence, namely other systematic reviews and meta-analyses. A methodology working group was formed by the Joanna Briggs Institute to develop methodological guidance for the conduct of an umbrella review, including diverse types of evidence, both quantitative and qualitative. The aim of this study is to describe the development and guidance for the conduct of an umbrella review. Discussion and testing of the elements of methods for the conduct of an umbrella review were held over a 6-month period by members of a methodology working group. The working group comprised six participants who corresponded via teleconference, e-mail and face-to-face meeting during this development period. In October 2013, the methodology was presented in a workshop at the Joanna Briggs Institute Convention. Workshop participants, review authors and methodologists provided further testing, critique and feedback on the proposed methodology. This study describes the methodology and methods developed for the conduct of an umbrella review that includes published systematic reviews and meta-analyses as the analytical unit of the review. Details are provided regarding the essential elements of an umbrella review, including presentation of the review question in a Population, Intervention, Comparator, Outcome format, nuances of the inclusion criteria and search strategy. A critical appraisal tool with 10 questions to help assess risk of bias in systematic reviews and meta-analyses was also developed and tested. Relevant details to extract from included reviews and how to best present the findings of both quantitative and qualitative systematic reviews in a reader friendly format are provided. Umbrella reviews provide a ready means for decision makers in healthcare to gain a clear understanding of a broad topic area. The umbrella review methodology described here is the first to consider reviews that report other than quantitative evidence derived from randomized controlled trials. The methodology includes an easy to use and informative summary of evidence table to readily provide decision makers with the available, highest level of evidence relevant to the question posed.

NASA Conducts "Out of Sight" Drone Tests in Nevada

NASA Image and Video Library

2016-10-27

Shareable video highlighting NASA's work with the Federal Aviation Administration (FAA) to develop an air traffic management platform for drones, called the Unmanned Aircraft Systems Traffic Management system or UTM.

cCRADA | Frederick National Laboratory for Cancer Research

Cancer.gov

A contractor Cooperative Research and Development Agreement(cCRADA) is a partnering mechanism that expands the opportunities for Frederick National Laboratoryresearchers to work with external parties to conduct collaborative research acti

Work of the Web Weavers: Web Development in Academic Libraries

ERIC Educational Resources Information Center

Bundza, Maira; Vander Meer, Patricia Fravel; Perez-Stable, Maria A.

2009-01-01

Although the library's Web site has become a standard tool for seeking information and conducting research in academic institutions, there are a variety of ways libraries approach the often challenging--and sometimes daunting--process of Web site development and maintenance. Three librarians at Western Michigan University explored issues related…

Breathing the Professional Development School Spirit into All Schools.

ERIC Educational Resources Information Center

Parsons, Beverly; Renyi, Judith

1999-01-01

Examines findings from work the National Foundation for the Improvement of Education has conducted with schools and teachers' associations nationwide to suggest ways that Professional Development Schools could improve results for teachers in schools. The paper focuses on incorporating peer assistance, using teachers' associations as collaborators,…

NATIONAL LABORATORIES: Better Performance Reporting Could Aid Oversight of Laboratory-Directed R&D Program

DTIC Science & Technology

2001-09-01

Development ( LDRD ) program, which formalized a long-standing policy of allowing its multi-program national laboratories discretion to conduct self...initiated, independent research and development (R&D). DOE requires that LDRD work must focus on the advanced study of scientific or technical problems...

The Individual Regulation Component of Group Emotional Intelligence: Measure Development and Validation

ERIC Educational Resources Information Center

Peterson, Christina Hamme

2012-01-01

Counseling work is increasingly conducted in team format. The methods counseling teams use to manage the emotional component of their group life, or their group emotional intelligence, have been proposed as significantly contributing to group member trust, cooperation, and ultimate performance. Item development, exploratory factor analysis, and…

Employee Development Programs: A Lateral Look at Workplace Learning.

ERIC Educational Resources Information Center

McKenzie, Ann; Hodge, Robyn

1999-01-01

Employee development programs (EDPs) are workplace adult education programs which focus on encouraging personal growth and improving confidence and self-esteem through the provision of leisure-based programs. EDPs are determined by employee needs, offered free of charge, and conducted outside working hours. EDPs were first implemented in the…

78 FR 48422 - Agency Information Collection Activities: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-08

... quantitative data through surveys with working-age (age 18-61) and older American (age 62 and older) consumers in order to develop and refine survey instruments that will enable the CFPB to reliably and... conducting research to identify methods and strategies to educate and counsel seniors, and developing goals...

Research Connections Canada: Supporting Children and Families, Number 2.

ERIC Educational Resources Information Center

Sullivan, Susan, Ed.; Bose, Kathy, Ed.; Levesque, Lise, Ed.

Serving as a vehicle for raising the profile of and thereby gaining recognition for the important research and development work being conducted in Canada in support of children and families, the "Research Connections Canada" series compiles research and/or development papers as well as background papers, analytical literature reviews,…

NASBE Study Group Surveys State Leadership Development Policy

ERIC Educational Resources Information Center

Newman, Bobbi; Hull, Robert

2015-01-01

State board members, working in partnership with the Consortium for Policy Research in Education (CPRE) at the University of Pennsylvania, conducted an in-depth study of states' school leadership development policies and practices. Data from this study are being analyzed to determine ways that states can create systems and structures for…

From Competence to Excellence: Developing Excellence in Vocational Skills.

ERIC Educational Resources Information Center

Smeaton, Barry; Hughes, Maria; Hall, Graeme

The United Kingdom's Learning and Skills Development Agency (LSDA), UK SKILLS, and the Further Education Skills Competition Council conducted a collaborative action research project to improve students' vocational learning and skills through enhanced learning experiences. From February 2001 to April 2002, three further education colleges worked to…

Thermal Conductivity of Metallic Uranium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hin, Celine

This project has developed a modeling and simulation approaches to predict the thermal conductivity of metallic fuels and their alloys. We focus on two methods. The first method has been developed by the team at the University of Wisconsin Madison. They developed a practical and general modeling approach for thermal conductivity of metals and metal alloys that integrates ab-initio and semi-empirical physics-based models to maximize the strengths of both techniques. The second method has been developed by the team at Virginia Tech. This approach consists of a determining the thermal conductivity using only ab-initio methods without any fitting parameters. Bothmore » methods were complementary. The models incorporated both phonon and electron contributions. Good agreement with experimental data over a wide temperature range were found. The models also provided insight into the different physical factors that govern the thermal conductivity under different temperatures. The models were general enough to incorporate more complex effects like additional alloying species, defects, transmutation products and noble gas bubbles to predict the behavior of complex metallic alloys like U-alloy fuel systems under burnup. 3 Introduction Thermal conductivity is an important thermal physical property affecting the performance and efficiency of metallic fuels [1]. Some experimental measurement of thermal conductivity and its correlation with composition and temperature from empirical fitting are available for U, Zr and their alloys with Pu and other minor actinides. However, as reviewed in by Kim, Cho and Sohn [2], due to the difficulty in doing experiments on actinide materials, thermal conductivities of metallic fuels have only been measured at limited alloy compositions and temperatures, some of them even being negative and unphysical. Furthermore, the correlations developed so far are empirical in nature and may not be accurate when used for prediction at conditions far from those used in the original fitting. Moreover, as fuels burn up in the reactor and fission products are built up, thermal conductivity is also significantly changed [3]. Unfortunately, fundamental understanding of the effect of fission products is also currently lacking. In this project, we probe thermal conductivity of metallic fuels with ab initio calculations, a theoretical tool with the potential to yield better accuracy and predictive power than empirical fitting. This work will both complement experimental data by determining thermal conductivity in wider composition and temperature ranges than is available experimentally, and also develop mechanistic understanding to guide better design of metallic fuels in the future. So far, we focused on α-U perfect crystal, the ground-state phase of U metal. We focus on two methods. The first method has been developed by the team at the University of Wisconsin Madison. They developed a practical and general modeling approach for thermal conductivity of metals and metal alloys that integrates ab-initio and semi-empirical physics-based models to maximize the strengths of both techniques. The second method has been developed by the team at Virginia Tech. This approach consists of a determining the thermal conductivity using only ab-initio methods without any fitting parameters. Both methods were complementary and very helpful to understand the physics behind the thermal conductivity in metallic uranium and other materials with similar characteristics. In Section I, the combined model developed at UWM is explained. In Section II, the ab-initio method developed at VT is described along with the uranium pseudo-potential and its validation. Section III is devoted to the work done by Jianguo Yu at INL. Finally, we will present the performance of the project in terms of milestones, publications, and presentations.« less

Ethics beyond borders: how health professionals experience ethics in humanitarian assistance and development work.

PubMed

Hunt, Matthew R

2008-08-01

Health professionals are involved in humanitarian assistance and development work in many regions of the world. They participate in primary health care, immunization campaigns, clinic- and hospital-based care, rehabilitation and feeding programs. In the course of this work, clinicians are frequently exposed to complex ethical issues. This paper examines how health workers experience ethics in the course of humanitarian assistance and development work. A qualitative study was conducted to consider this question. Five core themes emerged from the data, including: tension between respecting local customs and imposing values; obstacles to providing adequate care; differing understandings of health and illness; questions of identity for health workers; and issues of trust and distrust. Recommendations are made for organizational strategies that could help aid agencies support and equip their staff as they respond to ethical issues.

Evaluation of work stress, turnover intention, work experience, and satisfaction with preceptors of new graduate nurses using a 10-minute preceptor model.

PubMed

Hu, Yi-Chun; Chen, Su-Ru; Chen, I-Hui; Shen, Hsi-Che; Lin, Yen-Kuang; Chang, Wen-Yin

2015-06-01

Preparing new graduate nurses (NGNs) to achieve standards of nursing competence is challenging; therefore, this study developed and evaluated the effects of a 10-minute preceptor (10MP) model for assisting NGNs in their professional development and increasing their retention in hospitals. A repeated-measures design study, with an intervention and a two-group comparison, was conducted. A total of 107 NGNs participated in the study. At day 7, work stress and work experience were moderately high for the NGNs in both the 10MP and traditional preceptor model (TPM) groups. The preceptorship program showed significant differences between groups (p = 0.001) regarding work stress at months 2 and 3 and work experience at months 1, 2, and 3. The 10MP group reported lower turnover intention and higher satisfaction with the preceptors than the TPM group. The 10MP model is effective at improving training outcomes and facilitating the professional development of NGNs. Copyright 2015, SLACK Incorporated.

New Basis Functions for the Electromagnetic Solution of Arbitrarily-shaped, Three Dimensional Conducting Bodies Using Method of Moments

NASA Technical Reports Server (NTRS)

Mackenzie, Anne I.; Baginski, Michael E.; Rao, Sadasiva M.

2007-01-01

In this work, we present a new set of basis functions, de ned over a pair of planar triangular patches, for the solution of electromagnetic scattering and radiation problems associated with arbitrarily-shaped surfaces using the method of moments solution procedure. The basis functions are constant over the function subdomain and resemble pulse functions for one and two dimensional problems. Further, another set of basis functions, point-wise orthogonal to the first set, is also de ned over the same function space. The primary objective of developing these basis functions is to utilize them for the electromagnetic solution involving conducting, dielectric, and composite bodies. However, in the present work, only the conducting body solution is presented and compared with other data.

New Basis Functions for the Electromagnetic Solution of Arbitrarily-shaped, Three Dimensional Conducting Bodies using Method of Moments

NASA Technical Reports Server (NTRS)

Mackenzie, Anne I.; Baginski, Michael E.; Rao, Sadasiva M.

2008-01-01

In this work, we present a new set of basis functions, defined over a pair of planar triangular patches, for the solution of electromagnetic scattering and radiation problems associated with arbitrarily-shaped surfaces using the method of moments solution procedure. The basis functions are constant over the function subdomain and resemble pulse functions for one and two dimensional problems. Further, another set of basis functions, point-wise orthogonal to the first set, is also defined over the same function space. The primary objective of developing these basis functions is to utilize them for the electromagnetic solution involving conducting, dielectric, and composite bodies. However, in the present work, only the conducting body solution is presented and compared with other data.

Comparison of work and time estimates by chiropractic physicians with those of medical and osteopathic providers.

PubMed

Hess, J A; Mootz, R D

1999-06-01

Resource-based relative value scales (RBRVS) have become a standard method for identifying costs and determining reimbursement for physician services. Development of RBRVS systems and methods are reviewed, and the RBRVS concept of physician "work" is defined. Results of work and time inputs from chiropractic physicians are compared with those reported by osteopathic and medical specialties. Last, implications for reimbursement of chiropractic fee services are discussed. Total work, intraservice work, and time inputs for clinical vignettes reported by chiropractic, osteopathic, and medical physicians are compared. Data for chiropractic work and time reports were drawn from a national random sample of chiropractors conducted as part of a 1997 workers' compensation chiropractic fee schedule development project. Medical and osteopathic inputs were drawn from RBRVS research conducted at Harvard University under a federal contract reported in 1990. Both data sets used the same or similar clinical vignettes and similar methods. Comparisons of work and time inputs are made for clinical vignettes to assess whether work reported by chiropractors is of similar magnitude and variability as work reported by other specialties. Chiropractic inputs for vignettes related to evaluation and management services are similar to those reported by medical specialists and osteopathic physicians. The range of variation between chiropractic work input and other specialties is of similar magnitude to that within other specialties. Chiropractors report greater work input for radiologic interpretation and lower work input for manipulation services. Chiropractors seem to perform similar total "work" for evaluation and management services as other specialties. No basis exists for excluding chiropractors from using evaluation and management codes for reimbursement purposes on grounds of dissimilar physician time or work estimates. Greater work input by chiropractors in radiology interpretation may be related to a greater importance placed on findings in care planning. Consistently higher reports for osteopathic work input on manipulation are likely attributable to differences in reference vignettes used in the respective populations. Research with a common reference vignette used for manipulation providers is recommended, as is development of a single generic approach to coding for manipulation services.

Pipeline repair development in support of the Oman to India gas pipeline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abadie, W.; Carlson, W.

1995-12-01

This paper provides a summary of development which has been conducted to date for the ultra deep, diverless pipeline repair system for the proposed Oman to India Gas Pipeline. The work has addressed critical development areas involving testing and/or prototype development of tools and procedures required to perform a diverless pipeline repair in water depths of up to 3,525 m.

Astrobee: Developing a Free Flying Robot for the International Space Station

NASA Technical Reports Server (NTRS)

Bualat, Maria; Barlow, Jonathan; Fong, Terrence; Provencher, Christopher; Smith, Trey; Zuniga, Allison

2015-01-01

Astronaut time will always be in short supply, consumables (e.g., oxygen) will always be limited, and some work will not be feasible, or productive, for astronauts to do manually. Free flyers offer significant potential to perform a great variety of tasks, include routine, repetitive or simple but long-duration work, such as conducting environment surveys, taking sensor readings or monitoring crew activities. The "Astrobee" project is developing a new free flying robot system suitable for performing Intravehicular Activity (IVA) work on the International Space Station (ISS). This paper will describe the Astrobee project objectives, initial design, concept of operations, and key challenges.

Investigation of micro-gravity effects on heat pipe thermal performance and working fluid behavior, phase B

NASA Technical Reports Server (NTRS)

Gier, K. D.; Smith, M. O.

1990-01-01

The purpose of this experiment is to develop an in-depth understanding of the behavior of heat pipes in space. Both fixed conductance heat pipes (FCHPs) with axial grooves and variable conductance heat pipes (VCHPs) with porous wicks will be investigated. This understanding will be applied to the development of improved performance heat pipes subjected to various accelerations in space, including those encountered on a lunar base or Mars mission. More efficient, reliable, and lighter weight spacecraft thermal control systems should result from these investigations.

Automotive Stirling engine systems development

NASA Technical Reports Server (NTRS)

Richey, A. E.

1984-01-01

The objective of the Automotive Stirling Engine (ASE) program is to develop a Stirling engine for automotive use that provides a 30 percent improvement in fuel economy relative to a comparable internal-combustion engine while meeting emissions goals. This paper traces the engine systems' development efforts focusing on: (1) a summary of engine system performance for all Mod I engines; (2) the development, program conducted for the upgraded Mod I; and (3) vehicle systems work conducted to enhance vehicle fuel economy. Problems encountered during the upgraded Mod I test program are discussed. The importance of the EPA driving cycle cold-start penalty and the measures taken to minimize that penalty with the Mod II are also addressed.

Proton dynamics in oxides: insight into the mechanics of proton conduction from quasielastic neutron scattering.

PubMed

Karlsson, Maths

2015-01-07

This article is concerned with the use of quasielastic neutron scattering as a technique for investigation of the dynamical properties of proton conducting oxides. Currently, the main interest in these materials comes from their promise as electrolytes in future electrochemical devices and particularly through their use as electrolytes in next-generation, intermediate-temperature, fuel cells. However, the realization of such devices depends critically on the development of new, more highly proton conducting oxides. Such a development depends on increasing the current understanding of proton conduction in oxides and for this purpose quasielastic neutron scattering is an important mean. The aim of this article is to introduce the non-specialist reader to the basic principles of quasielastic neutron scattering, its advantages and disadvantages, to summarize the work that has been done on proton conducting oxides using this technique, as well as to discuss future opportunities within this field of research.

Development of Advanced Low Conductivity Thermal Barrier Coatings

NASA Technical Reports Server (NTRS)

Zhu, Dong-Ming; Miller, Robert A.

2004-01-01

Advanced multi-component, low conductivity oxide thermal barrier coatings have been developed using an approach that emphasizes real-time monitoring of thermal conductivity under conditions that are engine-like in terms of temperatures and heat fluxes. This is in contrast to the traditional approach where coatings are initially optimized in terms of furnace and burner rig durability with subsequent measurement in the as-processed or furnace-sintered condition. The present work establishes a laser high-heat-flux test as the basis for evaluating advanced plasma-sprayed and electron beam-physical vapor deposited (EB-PVD) thermal barrier coatings under the NASA Ultra-Efficient Engine Technology (UEET) Program. The candidate coating materials for this program are novel thermal barrier coatings that are found to have significantly reduced thermal conductivities and improved thermal stability due to an oxide-defect-cluster design. Critical issues for designing advanced low conductivity coatings with improved coating durability are also discussed.

Group attributional training as an effective approach to human resource development under team work systems.

PubMed

Wang, Z M

1994-07-01

An experimental programme of group attributional training under team work system was conducted as part of human resource development in Chinese industrial enterprises. One hundred and ten shopfloor employees participated in the study. Among them, 58 employees took part in the factorial-designed experiment to find out the effects of attributions on performance, and 52 employees of ten work groups participated in the group attributional training programme twice a week for two months. The results showed that the group attributional training was effective in modifying employees' attributional patterns and enhancing group performance and satisfaction. On the basis of the results, an attributional model of work motivation is proposed, and its theoretical and practical implications for human resource management discussed.

Group Work and the Learning of Critical Thinking in the Hong Kong Secondary Liberal Studies Curriculum

ERIC Educational Resources Information Center

Fung, Dennis; Howe, Christine

2014-01-01

This article reports the findings of a one-year longitudinal study that investigated the impact of group work on the development of students' critical thinking in Hong Kong secondary schools. It explores whether the participation of teachers in a group-based teaching intervention adapted from an earlier study conducted in the United Kingdom (UK)…

Group Supervision: Supporting Practitioners in Their Work with Children and Families in Children's Centres

ERIC Educational Resources Information Center

Soni, Anita

2013-01-01

This article discusses how group supervision can be used to support the Continuing Professional Development (CPD) of those working with children and families in early years provision in England. It is based on research conducted in 2008 with a cluster of four Children's Centres in the West Midlands in England, UK. The research evaluated group…

Integration of Nutrition-Related Components by Early Childhood Education Professionals into Their Individual Work with Children at Risk

ERIC Educational Resources Information Center

Shor, Ron; Friedman, Adina

2009-01-01

Poor nutrition is a major risk factor affecting proper development of children. However, there is limited knowledge about the way in which this subject is being integrated into professionals' work in early childhood education programs dealing with situations of children-at-risk. A study on this subject was conducted with 60 professionals who…

A Study of Attitudes Associated with Retraining. Part I. Work Resource and Retraining Initiative.

ERIC Educational Resources Information Center

Miskovic, Darlene

A study was conducted to develop an understanding of retraining from the perspective of those who have experienced it--to know more about how and why they decided to undertake the process of acquiring new or additional work skills, how they learned about the alternatives available to them, and what feelings accompanied this experience. Research…

Direct Instruction in Language and Speaking: A Study of Mother-Child Discourse in a Working-Class Community.

ERIC Educational Resources Information Center

Miller, Peggy

A naturalistic-observational study of three inner-city, working-class mother-infant pairs was conducted to study early language development and maternal teaching styles. The subjects were three white 2-year-olds and their mothers. Observations were made under everyday conditions as the infants interacted with their mothers and other family members…

Building human capacity through early childhood intervention: the Child Development Research Programme at the Tropical Medicine Research Institute, the University of the West Indies, Kingston, Jamaica.

PubMed

Walker, S P; Chang, S M; Powell, C A; Baker-Henningham, H

2012-07-01

Research conducted by the Child Development Research Group in the Tropical Medicine Research Institute has made significant contributions to the understanding of the importance of early nutrition and the home environment for children's development and the impact of psychosocial stimulation for disadvantaged and/or undernourished children. The work has provided critical evidence that has contributed to the increasing attention given to early childhood development in the work and policies of agencies such as the World Bank, World Health Organization (WHO) and United Nations Children Fund (UNICEF). This review concerns research which documented the impact of malnutrition on children's development and for the first time demonstrated the benefits and necessity of psychosocial stimulation for improvement in development. Subsequent research was critical in establishing the importance of linear growth retardation (stunting) as a risk factor for poor child development. A twenty-two-year study of stunted children has demonstrated benefits through to adulthood in areas such as educational attainment, mental health and reduced violent behaviour from an early childhood home visiting programme that works through mothers to promote their children's development. The group's research has also demonstrated that it is feasible and effective to integrate the stimulation intervention into primary care services with benefits to children's development and mothers'child rearing knowledge and practices. The group is currently conducting a study to provide information needed for scaling-up of parenting programmes through evaluation of a new approach to improving parenting through health centres and a modified home visit programme.

The Development of an Instrument to Measure the Work Capability of People with Limited Work Capacity (LWC).

PubMed

van Ruitenbeek, Gemma M C; Zijlstra, Fred R H; Hülsheger, Ute R

2018-06-04

Purpose Participation in regular paid jobs positively affects mental and physical health of all people, including people with limited work capacities (LWC), people that are limited in their work capacity as a consequence of their disability, such as chronic mental illness, psychological or developmental disorder. For successful participation, a good fit between on one hand persons' capacities and on the other hand well-suited individual support and a suitable work environment is necessary in order to meet the demands of work. However, to date there is a striking paucity of validated measures that indicate the capability to work of people with LWC and that outline directions for support that facilitate the fit. Goal of the present study was therefore to develop such an instrument. Specifically, we adjusted measures of mental ability, conscientiousness, self-efficacy, and coping by simplifying the language level of these measures to make the scales accessible for people with low literacy. In order to validate these adjusted self-report and observer measures we conducted two studies, using multi-source, longitudinal data. Method Study 1 was a longitudinal multi-source study in which the newly developed instrument was administered twice to people with LWC and their significant other. We statistically tested the psychometric properties with respect to dimensionality and reliability. In Study 2, we collected new multi-source data and conducted a confirmatory factor analysis (CFA). Results Studies yielded a congruous factor structure in both samples, internally consistent measures with adequate content validity of scales and subscales, and high test-retest reliability. The CFA confirmed the factorial validity of the scales. Conclusion The adjusted self-report and the observer scales of mental ability, conscientiousness, self-efficacy, and coping are reliable measures that are well-suited to assess the work capability of people with LWC. Further research is needed to examine criterion-related validity with respect to the work demands such as work-behaviour and task performance.

Fuel-Air Mixing and Combustion in Scramjets

NASA Technical Reports Server (NTRS)

Drummond, J. P.; Diskin, Glenn S.; Cutler, A. D.

2002-01-01

Activities in the area of scramjet fuel-air mixing and combustion associated with the Research and Technology Organization Working Group on Technologies for Propelled Hypersonic Flight are described. Work discussed in this paper has centered on the design of two basic experiments for studying the mixing and combustion of fuel and air in a scramjet. Simulations were conducted to aid in the design of these experiments. The experimental models were then constructed, and data were collected in the laboratory. Comparison of the data from a coaxial jet mixing experiment and a supersonic combustor experiment with a combustor code were then made and described. This work was conducted by NATO to validate combustion codes currently employed in scramjet design and to aid in the development of improved turbulence and combustion models employed by the codes.

Using Solution Strategies to Examine and Promote High-School Students' Understanding of Exponential Functions: One Teacher's Attempt

ERIC Educational Resources Information Center

Brendefur, Jonathan

2014-01-01

Much research has been conducted on how elementary students develop mathematical understanding and subsequently how teachers might use this information. This article builds on this type of work by investigating how one high-school algebra teacher designs and conducts a lesson on exponential functions. Through a lesson study format she studies with…

Assessment of government tribology programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, M.B.; Levinson, T.M.

1985-09-01

An assessment has been made to determine current tribology research and development work sponsored or conducted by the government. Data base surveys and discussions were conducted to isolate current projects sponsored primarily by 21 different government organizations. These projects were classified by subject, objective, energy relevance, type of research, phenomenon being investigated, variables being studied, type of motion, materials and application. An abstract of each project was prepared which included the classification, sponsor, performing organization and a project description. It was found that current work is primarily materials oriented to meet military requirements. Other than the high temperature programs verymore » few of the tribology projects accomplish energy related objectives.« less

Research and Development of External Occultor Technology for the Direct Observation of Extrasolar Planetary Systems : JPL Starshades Project

NASA Technical Reports Server (NTRS)

Franz, Herbert; Stadeler, Mehnert

2012-01-01

Our group conducted work during the Summer of 2012 assembling and developing JPL's Starshades Project under the Technology Development for Exoplanet Missions(TDEM) initiative created by NASA, specifically TDEM stage 2. The goal of the work conducted at JPL by our group was to construct four occultor petals, the main optical components of the Starshade, for the analysis of joint deployment characteristics and of mechanical strain. A Starshade is an optical structure measuring approximately 30 meters in diameter that uses the effects of light diffraction off sheer edges, light scattering, and negative interference between waves to negate all on-axis light in a telescope's image, providing very high contrast that allows planets orbiting a target star to be observed. We completed our engineering goals in the time span of 10 weeks, during which the assembly processes of manufacture, alignment, and structural bonding took place. The Starshade technology and construction process is further discussed in the body of this paper.

Impact of Development and Accommodation Practices on Older Workers' Job Characteristics, Prolonged Fatigue, Work Engagement, and Retirement Intentions Over Time.

PubMed

Stynen, Dave; Jansen, Nicole W H; Slangen, Jos J M; Kant, IJmert

2016-11-01

The impact of development and accommodation practices on older workers' retirement intentions was investigated in this prospective study, together with potential pathways and the role of career stage. A subsample of full-time, older workers (n = 678) from the Maastricht Cohort Study was followed-up for 2 years. Regression analysis was conducted for three age groups. Development practices related positively with later retirement intentions in workers aged 55 to 59 years. The accommodation practice of demotion related negatively with later retirement intentions in worker aged at least 60 years. Decision latitude and work engagement were found to link development and accommodation practices with later retirement intentions in particular in workers aged 55 to 59 years. It was indicated in this prospective study that development and accommodation practices may be useful for prolonging working careers.

Improving automobile fuel economy: new standards, new approaches

DOT National Transportation Integrated Search

1991-12-01

This report examines the major issues associated with developing new fuel economy standards. It builds on work that the Office of Technology Assessment conducted for its report, "Energy Technology Choices: Shaping Our Future." 118p.

New Skills for Out-of-Work Engineers

ERIC Educational Resources Information Center

Environmental Science and Technology, 1972

1972-01-01

Discusses an innovative educational program conducted by a large aerospace company to retrain unemployed aerospace engineers in water pollution control, thus providing them with useful and satisfying employment. Program development, implementation and success are reviewed. (BL)

Training Students’ Science Process Skills through Didactic Design on Work and Energy

NASA Astrophysics Data System (ADS)

Ramayanti, S.; Utari, S.; Saepuzaman, D.

2017-09-01

Science Process Skills (SPS) has not been optimally trained to the students in the learning activity. The aim of this research is finding the ways to train SPS on the subject of Work and Energy. One shot case study design is utilized in this research that conducted on 32 students in one of the High Schools in Bandung. The students’ SPS responses were analyzed by the development SPS based assessment portfolios. The results of this research showed the didactic design that had been designed to training the identifying variables skills, formulating hypotheses, and the experiment activity shows the development. But the didactic design to improve the students’ predicting skills shows that the development is still not optimal. Therefore, in the future studies need to be developed the didactic design on the subject Work and Energy that exercising these skills.

Revisiting galactic black hole binary GX 339-4 by using 2007 – 2014 Swift XRT observations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Azizi, Febrie Ahmad; Vierdayanti, Kiki; Putra, Mahasena

2015-09-30

This work aims to study the X-ray properties of the galactic black hole binary GX 339-4. Focus of the study is on exploration of data from Swift-XRT in exclusively photon-counting mode. We use data from 2007 up to August 2014, which contain about 40 pointing observations with level 1 data. The flux of GX 339-4 varies in a factor of 100 during this period of observations. For the purpose of this work, we also try to develop a system to conduct standard SWIFT XRT data reduction automatically, in order to greatly reduce time when working with data bulk, which producesmore » images, lightcurves as well as spectra. We also develop another system to conduct fitting of bulk spectral data with a two-component model, disk blackbody and power-law. The fitting results show that no data have a reduced chi-squared > 2. The fraction of the disk to total flux and the power-law to total flux range from 0.00389 – 0.994 and 0.00605 – 0.996, respectively. From the analysis of the disk component, we obtain the value of the innermost disk radius that does not show any large scale truncation which is in a good agreement with a previous study that used 2007 – 2011 Swift-XRT data, indicating that the systems we developed work properly.« less

Lifelong Career Development Needs Assessment Study. Working Paper No. 3. Lifelong Career Development Project.

ERIC Educational Resources Information Center

Schoepke, JoAnn M.

The report presents findings from needs assessment studies conducted in three community college areas to examine the extent to which 161 severely handicapped adults in seven disability groups (orthopedic, visual, hearing, mental retardation, epilepsy, cerebral palsy, and multiple handicapping conditions) have acquired 22 life centered competencies…

Investing in Teaching Development: Navigating Risk in a Research Intensive Institution

ERIC Educational Resources Information Center

Jawitz, Jeff; Perez, Teresa

2016-01-01

It is often assumed that academics working in a research intensive university are unlikely to invest in the professional development of their teaching. Institutional structures and culture tend to undermine investment in academics' teaching role. This study, conducted at the University of Cape Town, draws on an analysis of the environment within…

The Oral History of Evaluation: The Professional Development of Marvin C. Alkin

ERIC Educational Resources Information Center

American Journal of Evaluation, 2010

2010-01-01

Over the past 7 years, the Oral History Project Team has conducted interviews with individuals who have made signal contributions to evaluation theory and practice, tracing their professional development and contextualizing their work within the social and political climates of the time. By capturing the professional evolution of those who have…

Procedures for Developing an Inservice Industry/Education Exchange Program: Planning and Implementation Guide.

ERIC Educational Resources Information Center

Adams, Keith K.; Whiteman, Richard E.

This report describes an in-service industry exchange project conducted by Cerritos College during which five faculty members returned to the work place to update their skills and gather information useful in curriculum development. First, the project's objectives are delineated, covering: (1) formation of the Project Advisory Committee and…

Development of a protocol for the ecological assessment of a special species

Treesearch

David Burton

2004-01-01

Developing consistent inventory and assessment protocols is important to people working on aspen issues in California and Nevada. Efforts have focused on identifying key indicators of ecological condition within aspen stands. The protocols have incorporated a range of factors that create or affect those indicators. Resulting ecological assessments conducted through the...

Practitioner Research as Part of Professional Development in Initial Teacher Education

ERIC Educational Resources Information Center

Maaranen, Katriina

2009-01-01

The purpose of this research is to seek the connection between professional development and an MA thesis research project, which is conducted as part of initial teacher education in Finland. This article examines the experiences of teachers with work experience, but without an official qualification, who recently completed their MA thesis. The…

Working Locally as a True Professional: Case Studies in the Development of Local Curriculum

ERIC Educational Resources Information Center

Sahasewiyon, Kirin

2004-01-01

This article investigates the dynamic overall picture concerning the development of local curriculum in Thailand through action research conducted by 27 Thai elementary school teachers in three private schools in Fang District, Chiang Mai Province. This was the teachers' first experience with action research. The article examines the following…

Approaches to Developing Health in Early Years Settings

ERIC Educational Resources Information Center

Mooney, Ann; Boddy, Janet; Statham, June; Warwick, Ian

2008-01-01

Purpose: The purpose of the paper is to consider the opportunities and difficulties in developing health-promotion work in early years settings in the UK. Design/methodology/approach: As the first study of its kind conducted in the UK, a multi-method approach was adopted involving: an overview of health-related guidance and of effective…

The Support Appraisal for Work Stressors Inventory: Construction and Initial Validation

ERIC Educational Resources Information Center

Lawrence, Sandra A.; Gardner, John; Callan, Victor J.

2007-01-01

In order to better understand the role of perceived available support in buffering the negative effects of workplace stressors, a new multidimensional measure of perceived available support, the SAWS, was developed. Initial item development and content validation were conducted, followed by scale evaluation and validation. Two samples of 190 and…

Motivation for and Benefits from Attending the AP Statistics Reading

ERIC Educational Resources Information Center

Jacobbe, Tim; Hartlaub, Bradley A.; Whitaker, Douglas

2013-01-01

This study explores the Advanced Placement® Statistics reading as a source of professional development for teachers. The study was conducted to capture the motivation for and benefits from attending the collective grading. Research has shown that examining student work during professional development has implications for teaching. The premise of…

Process Consultation: Its Role in Organization Development.

ERIC Educational Resources Information Center

Schein, Edgar H.

This volume focuses on the process by which the consultant builds readiness for organizational development (OD) programs, actually conducts training, and works with the key individuals of an organization as part of an OD program. Part I describes in some detail the human processes in organizations--communication, functional roles of group members,…

Developing Leadership Skills in "Introduction to Engineering Courses" through Multi-Media Case Studies

ERIC Educational Resources Information Center

Sankar, Chetan S.; Kawulich, Barbara; Clayton, Howard; Raju, P. K.

2010-01-01

A literature review identifies a partial list of leadership skills to include developing higher-order cognitive skills, team working skills, positive attitude, and ability to transfer these skills to future environment. This paper discusses the results of research conducted on the use of multiple instructional methodologies in two different…

The Oral History of Evaluation: The Professional Development of Robert Stake

ERIC Educational Resources Information Center

Miller, Robin Lin; King, Jean A.; Mark, Melvin M.; Caracelli, Valerie

2016-01-01

Over the past 14 years, AEA's Oral History Project Team (Robin Lin Miller, Jean A. King, Valerie Caracelli, and Melvin M. Mark) has conducted interviews with individuals who have made signal contributions to evaluation theory and practice, tracing their professional development and contextualizing their work within the social and political…

A Research Agenda for Online Teacher Professional Development

ERIC Educational Resources Information Center

Dede, Chris; Ketelhut, Diane Jass; Whitehouse, Pamela; Breit, Lisa; McCloskey, Erin M.

2009-01-01

This article highlights key online teacher professional development (oTPD) areas in need of research based on a review of current oTPD research conducted in conjunction with an oTPD conference held at Harvard University in fall 2005. The literature review of this field documents much work that is anecdotal, describing professional development…

Data to Support Development of Geologic Framework Models for the Deep Borehole Field Test

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perry, Frank Vinton; Kelley, Richard E.

This report summarizes work conducted in FY2017 to identify and document publically available data for developing a Geologic Framework Model (GFM) for the Deep Borehole Field Test (DBFT). Data was collected for all four of the sites being considered in 2017 for a DBFT site.

Research Skills Development in Higher Education Students

ERIC Educational Resources Information Center

Bergamini, Tiziana Priede; Navarro, Cristina Lopez-Cozar

2014-01-01

This case study presents the development of a research project in a third-year undergraduate course, Family Business Administration. The research project aimed at promoting research skills in students. The authors formed working groups of no more than six students, and each group had to select an original research topic after conducting a…

Science and Mathematics Teachers Working Toward Equity Through Teacher Research: Tracing Changes Across Their Research Process and Equity Views

NASA Astrophysics Data System (ADS)

Brenner, Mary E.; Bianchini, Julie A.; Dwyer, Hilary A.

2016-12-01

We investigated secondary science and mathematics teachers engaged in a two-and-a-half-year professional development effort focused on equity. We examined how teachers conducting research on their own instructional practices—a central learning strategy of the professional development project—informed and/or constrained their views related to three strands of equity: teachers and teaching, students and learning, and students' families and communities. Data collected included recordings of professional development seminars and school-site meetings, three sets of individual interviews with teacher researchers, and drafts and final products of the classroom research teachers conducted. From our qualitative analyses of data, we found that most teachers addressed at least two of the three equity strands in researching their own practice. We also found that most transformed their understandings of teachers and students as a result of their teacher research process. However, teachers' views of families and communities changed in less substantive ways. We close with recommendations for other researchers and professional developers intent on supporting science and mathematics teachers in using teacher research to work toward equity.

Development of a skin for intuitive interaction with an assistive robot.

PubMed

Markham, Heather C; Brewer, Bambi R

2009-01-01

Assistive robots for persons with physical limitations need to interact with humans in a manner that is safe to the user and the environment. Early work in this field centered on task specific robots. Recent work has focused on the use of the MANUS ARM and the development of different interfaces. The most intuitive interaction with an object is through touch. By creating a skin for the robot arm which will directly control its movement compliance, we have developed a novel and intuitive method of interaction. This paper describes the development of a skin which acts as a switch. When activated through touch, the skin will put the arm into compliant mode allowing it to be moved to the desired location safely, and when released will put the robot into non-compliant mode thereby keeping it in place. We investigated four conductive materials and four insulators, selecting the best combination based on our design goals of the need for a continuous activation surface, the least amount of force required for skin activation, and the most consistent voltage change between the conductive surfaces measured during activation.

Conducting polymer actuators: From basic concepts to proprioceptive systems

NASA Astrophysics Data System (ADS)

Martinez Gil, Jose Gabriel

Designers and engineers have been dreaming for decades of motors sensing, by themselves, working and surrounding conditions, as biological muscles do originating proprioception. Here bilayer full polymeric artificial muscles were checked up to very high cathodic potential limits (-2.5 V) in aqueous solution by cyclic voltammetry. The electrochemical driven exchange of ions from the conducting polymer film, and the concomitant Faradaic bending movement of the muscle, takes place in the full studied potential range. The presence of trapped counterion after deep reduction was corroborated by EDX determinations giving quite high electronic conductivity to the device. The large bending movement was used as a tool to quantify the amount of water exchanged per reaction unit (exchanged electron or ion). The potential evolutions of self-supported films of conducting polymers or conducting polymers (polypyrrole, polyaniline) coating different microfibers, during its oxidation/reduction senses working mechanical, thermal, chemical or electrical variables. The evolution of the muscle potential from electrochemical artificial muscles based on electroactive materials such as intrinsically conducting polymers and driven by constant currents senses, while working, any variation of the mechanical (trailed mass, obstacles, pressure, strain or stress), thermal or chemical conditions of work. One physically uniform artificial muscle includes one electrochemical motor and several sensors working simultaneously under the same driving reaction. Actuating (current and charge) and sensing (potential and energy) magnitudes are present, simultaneously, in the only two connecting wires and can be read by the computer at any time. From basic polymeric, mechanical and electrochemical principles a physicochemical equation describing artificial proprioception has been developed. It includes and describes, simultaneously, the evolution of the muscle potential during actuation as a function of the motor characteristics (rate and sense of the movement, relative position, and required energy) and the working variables (temperature, electrolyte concentration, mechanical conditions and driving current). By changing working conditions experimental results overlap theoretical predictions. The ensemble computer-generator-muscle-theoretical equation constitutes and describes artificial mechanical, thermal and chemical proprioception of the system. Proprioceptive tools and most intelligent zoomorphic or anthropomorphic soft robots can be envisaged.

Evaluation of thin discontinuities in planar conducting materials using the diffraction of electromagnetic field

NASA Astrophysics Data System (ADS)

Savin, A.; Novy, F.; Fintova, S.; Steigmann, R.

2017-08-01

The current stage of nondestructive evaluation techniques imposes the development of new electromagnetic (EM) methods that are based on high spatial resolution and increased sensitivity. In order to achieve high performance, the work frequencies must be either radifrequencies or microwaves. At these frequencies, at the dielectric/conductor interface, plasmon polaritons can appear, propagating between conductive regions as evanescent waves. In order to use the evanescent wave that can appear even if the slits width is much smaller that the wavwelength of incident EM wave, a sensor with metamaterial (MM) is used. The study of the EM field diffraction against the edge of long thin discontinuity placed under the inspected surface of a conductive plate has been performed using the geometrical optics principles. This type of sensor having the reception coils shielded by a conductive screen with a circular aperture placed in the front of reception coil of emission reception sensor has been developed and “transported” information for obtaining of magnified image of the conductive structures inspected. This work presents a sensor, using MM conical Swiss roll type that allows the propagation of evanescent waves and the electromagnetic images are magnified. The test method can be successfully applied in a variety of applications of maxim importance such as defect/damage detection in materials used in automotive and aviation technologies. Applying this testing method, spatial resolution can be improved.

Effectiveness of video-assisted teaching program on safety measures followed by the employees working in the silica-based industry in Puducherry, India

PubMed Central

Nanthini, Thiruvengadam; Karunagari, Karaline

2016-01-01

Introduction: Employees constitute a large and important sector of the world's population. The global labor force is about 2,600 million and 75% of this force is working in developing countries. Occupational health and safety (OHS) must be managed in every aspect of their work. Occupational safety and health (OSH), also commonly referred to as OHS or workplace health and safety (WHS) is an area concerned with the safety, health, and welfare of people engaged in any employment. The goal of OSH is to foster a safe and healthy work environment. The aim of this study is to evaluate the effectiveness of video-assisted teaching program on safety measures. Materials and Methods: A total of 105 employees were selected from M/s ACE Glass Containers Ltd. at Puducherry, India using the convenience sampling technique. Pretest was conducted using a self-administered questionnaire. Subsequent video-assisted teaching was conducted by the investigator after which posttest was conducted. Results and Conclusion: Video-assisted teaching program was found to be effective in improving the knowledge, attitude, and practice of the subjects. Periodical reorientation on safety measures are needed for all the employees as it is essential for promoting the well-being of employees working in any industry. PMID:27390477

Effectiveness of video-assisted teaching program on safety measures followed by the employees working in the silica-based industry in Puducherry, India.

PubMed

Nanthini, Thiruvengadam; Karunagari, Karaline

2016-01-01

Employees constitute a large and important sector of the world's population. The global labor force is about 2,600 million and 75% of this force is working in developing countries. Occupational health and safety (OHS) must be managed in every aspect of their work. Occupational safety and health (OSH), also commonly referred to as OHS or workplace health and safety (WHS) is an area concerned with the safety, health, and welfare of people engaged in any employment. The goal of OSH is to foster a safe and healthy work environment. The aim of this study is to evaluate the effectiveness of video-assisted teaching program on safety measures. A total of 105 employees were selected from M/s ACE Glass Containers Ltd. at Puducherry, India using the convenience sampling technique. Pretest was conducted using a self-administered questionnaire. Subsequent video-assisted teaching was conducted by the investigator after which posttest was conducted. Video-assisted teaching program was found to be effective in improving the knowledge, attitude, and practice of the subjects. Periodical reorientation on safety measures are needed for all the employees as it is essential for promoting the well-being of employees working in any industry.

Gene Regulatory Networks in Cardiac Conduction System Development

PubMed Central

Munshi, Nikhil V.

2014-01-01

The cardiac conduction system is a specialized tract of myocardial cells responsible for maintaining normal cardiac rhythm. Given its critical role in coordinating cardiac performance, a detailed analysis of the molecular mechanisms underlying conduction system formation should inform our understanding of arrhythmia pathophysiology and affect the development of novel therapeutic strategies. Historically, the ability to distinguish cells of the conduction system from neighboring working myocytes presented a major technical challenge for performing comprehensive mechanistic studies. Early lineage tracing experiments suggested that conduction cells derive from cardiomyocyte precursors, and these claims have been substantiated by using more contemporary approaches. However, regional specialization of conduction cells adds an additional layer of complexity to this system, and it appears that different components of the conduction system utilize unique modes of developmental formation. The identification of numerous transcription factors and their downstream target genes involved in regional differentiation of the conduction system has provided insight into how lineage commitment is achieved. Furthermore, by adopting cutting-edge genetic techniques in combination with sophisticated phenotyping capabilities, investigators have made substantial progress in delineating the regulatory networks that orchestrate conduction system formation and their role in cardiac rhythm and physiology. This review describes the connectivity of these gene regulatory networks in cardiac conduction system development and discusses how they provide a foundation for understanding normal and pathological human cardiac rhythms. PMID:22628576

Grizzly Staus Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, Benjamin; Zhang, Yongfeng; Chakraborty, Pritam

2014-09-01

This report summarizes work during FY 2014 to develop capabilities to predict embrittlement of reactor pressure vessel steel, and to assess the response of embrittled reactor pressure vessels to postulated accident conditions. This work has been conducted a three length scales. At the engineering scale, 3D fracture mechanics capabilities have been developed to calculate stress intensities and fracture toughnesses, to perform a deterministic assessment of whether a crack would propagate at the location of an existing flaw. This capability has been demonstrated on several types of flaws in a generic reactor pressure vessel model. Models have been developed at themore » scale of fracture specimens to develop a capability to determine how irradiation affects the fracture toughness of material. Verification work has been performed on a previously-developed model to determine the sensitivity of the model to specimen geometry and size effects. The effects of irradiation on the parameters of this model has been investigated. At lower length scales, work has continued in an ongoing to understand how irradiation and thermal aging affect the microstructure and mechanical properties of reactor pressure vessel steel. Previously-developed atomistic kinetic monte carlo models have been further developed and benchmarked against experimental data. Initial work has been performed to develop models of nucleation in a phase field model. Additional modeling work has also been performed to improve the fundamental understanding of the formation mechanisms and stability of matrix defects caused.« less

Development of an Assay for the Detection of PrPres in Blood and Urine Based on PMCA Assay and ELISA Methods

DTIC Science & Technology

2006-09-01

conducted any work with Biotraces in this last period and no funding was drawn from the grant. The collaboration is still open but the work was put...on hold until a better and more sensitive assay platform is developed and fully tested by Biotraces . The company is expected to open a laboratory...at the University of Maryland at the Baltimore campus. When this happens we will be able to establish a more efficient collaboration with Biotraces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This Remedial Investigation (RI) Work Plan has been developed as part of the US Department of Energy`s (DOE`s) investigation of the Groundwater Operable Unit (GWOU) at Oak Ridge National Laboratory (ORNL) located near Oak Ridge, Tennessee. The first iteration of the GWOU RI Work Plan is intended to serve as a strategy document to guide the ORNL GWOU RI. The Work Plan provides a rationale and organization for groundwater data acquisition, monitoring, and remedial actions to be performed during implementation of environmental restoration activities associated with the ORNL GWOU. It Is important to note that the RI Work Plan formore » the ORNL GWOU is not a prototypical work plan. The RI will be conducted using annual work plans to manage the work activities, and task reports will be used to document the results of the investigations. Sampling and analysis results will be compiled and reported annually with a review of data relative to risk (screening level risk assessment review) for groundwater. This Work Plan outlines the overall strategy for the RI and defines tasks which are to be conducted during the initial phase of investigation. This plan is presented with the understanding that more specific addenda to the plan will follow.« less

Mental health and psychosocial support in crisis and conflict: report of the Mental Health Working Group.

PubMed

Allden, K; Jones, L; Weissbecker, I; Wessells, M; Bolton, P; Betancourt, T S; Hijazi, Z; Galappatti, A; Yamout, R; Patel, P; Sumathipala, A

2009-01-01

The Working Group on Mental Health and Psychosocial Support was convened as part of the 2009 Harvard Humanitarian Action Summit. The Working Group chose to focus on ethical issues in mental health and psychosocial research and programming in humanitarian settings. The Working Group built on previous work and recommendations, such as the Inter-Agency Standing Committee's Guidelines on Mental Health and Psychosocial Support in Emergency Settings. The objective of this working group was to address one of the factors contributing to the deficiency of research and the need to develop the evidence base on mental health and psychosocial support interventions during complex emergencies by proposing ethical research guidelines. Outcomes research is vital for effective program development in emergency settings, but to date, no comprehensive ethical guidelines exist for guiding such research efforts. Working Group members conducted literature reviews which included peer-reviewed publications, agency reports, and relevant guidelines on the following topics: general ethical principles in research, cross-cultural issues, research in resource-poor countries, and specific populations such as trauma and torture survivors, refugees, minorities, children and youth, and the mentally ill. Working Group members also shared key points regarding ethical issues encountered in their own research and fieldwork. The group adapted a broad definition of the term "research", which encompasses needs assessments and data gathering, as well as monitoring and evaluation. The guidelines are conceptualized as applying to formal and informal processes of assessment and evaluation in which researchers as well as most service providers engage. The group reached consensus that it would be unethical not to conduct research and evaluate outcomes of mental health and psychosocial interventions in emergency settings, given that there currently is very little good evidence base for such interventions. Overarching themes and issues generated by the group for further study and articulation included: purpose and benefits of research, issues of validity, neutrality, risk, subject selection and participation, confidentiality, consent, and dissemination of results. The group outlined several key topics and recommendations that address ethical issues in conducting mental health and psychosocial research in humanitarian settings. The group views this set of recommendations as a living document to be further developed and refined based on input from colleagues representing different regions of the globe with an emphasis on input from colleagues from low-resource countries.

Development and validation of a prediction algorithm for the onset of common mental disorders in a working population.

PubMed

Fernandez, Ana; Salvador-Carulla, Luis; Choi, Isabella; Calvo, Rafael; Harvey, Samuel B; Glozier, Nicholas

2018-01-01

Common mental disorders are the most common reason for long-term sickness absence in most developed countries. Prediction algorithms for the onset of common mental disorders may help target indicated work-based prevention interventions. We aimed to develop and validate a risk algorithm to predict the onset of common mental disorders at 12 months in a working population. We conducted a secondary analysis of the Household, Income and Labour Dynamics in Australia Survey, a longitudinal, nationally representative household panel in Australia. Data from the 6189 working participants who did not meet the criteria for a common mental disorders at baseline were non-randomly split into training and validation databases, based on state of residence. Common mental disorders were assessed with the mental component score of 36-Item Short Form Health Survey questionnaire (score ⩽45). Risk algorithms were constructed following recommendations made by the Transparent Reporting of a multivariable prediction model for Prevention Or Diagnosis statement. Different risk factors were identified among women and men for the final risk algorithms. In the training data, the model for women had a C-index of 0.73 and effect size (Hedges' g) of 0.91. In men, the C-index was 0.76 and the effect size was 1.06. In the validation data, the C-index was 0.66 for women and 0.73 for men, with positive predictive values of 0.28 and 0.26, respectively Conclusion: It is possible to develop an algorithm with good discrimination for the onset identifying overall and modifiable risks of common mental disorders among working men. Such models have the potential to change the way that prevention of common mental disorders at the workplace is conducted, but different models may be required for women.

Preventing Serious Conduct Problems in School-Age Youths: The Fast Track Program

PubMed Central

Slough, Nancy M.; McMahon, Robert J.; Bierman, Karen L.; Coie, John D.; Dodge, Kenneth A.; Foster, E. Michael; Greenberg, Mark T.; Lochman, John E.; McMahon, Robert J.; Pinderhughes, Ellen E.

2009-01-01

Children with early-starting conduct Problems have a very poor prognosis and exact a high cost to society. The Fast Track project is a multisite, collaborative research project investigating the efficacy of a comprehensive, long-term, multicomponent intervention designed to prevent the development of serious conduct problems in high-risk children. In this article, we (a) provide an overview of the development model that serves as the conceptual foundation for the Fast Track intervention and describe its integration into the intervention model; (b) outline the research design and intervention model, with an emphasis on the elementary school phase of the intervention; and (c) summarize findings to dale concerning intervention outcomes. We then provide a case illustration, and conclude with a discussion of guidelines for practitioners who work with children with conduct problems. PMID:19890487

Data assimilation for the investigation of deep temperature and geothermal energy in the Netherlands.

NASA Astrophysics Data System (ADS)

Bonté, Damien; Limberger, Jon; Lipsey, Lindsey; Cloetingh, Sierd; van Wees, Jan-Diederik

2016-04-01

Deep geothermal energy systems, mostly for the direct use of heat, have been attracting more and more interest in the past 10 years in Western Europe. In the Netherlands, where the sector took off with the first system in 2005, geothermal energy is seen has a key player for a sustainable future. To support the development of deep geothermal energy system, the scientific community has been working on tools that could be used to highlight area of potential interest for geothermal exploration. In the Netherlands, ThermoGIS is one such tool that has been developed to inform the general public, policy makers, and developers in the energy sector of the possibility of geothermal energy development. One major component incorporated in this tool is the temperature model. For the Netherlands, we created a thermal model at the lithospheric scale that focus on the sedimentary deposits for deep geothermal exploration. This regional thermal modelling concentrates on the variations of geological thermal conductivity and heat production both in the sediments and in the crust. In addition, we carried out special modelling in order to specifically understand convectivity in the basin, focusing on variations at a regional scale. These works, as well as recent improved of geological knowledge in the deeper part of the basin, show interesting evidence for geothermal energy development. At this scale, the aim of this work is to build on these models and, using data assimilation, to discriminate in the actual causes of the observed anomalies. The temperature results obtained for the Netherlands show some thermal patterns that relate to the variation of the thermal conductivity and the geometry of the sediments. There is also strong evidence to indicate that deep convective flows are responsible for thermal anomalies. The combination of conductive and local convective thermal patterns makes the deeper part of the Dutch sedimentary basin of great interest for the development of geothermal energy.

Preparation for Scaling Studies of Ice-Crystal Icing at the NRC Research Altitude Test Facility

NASA Technical Reports Server (NTRS)

Struk, Peter M.; Bencic, Timothy J.; Tsao, Jen-Ching; Fuleki, Dan; Knezevici, Daniel C.

2013-01-01

This paper describes experiments conducted at the National Research Council (NRC) of Canadas Research Altitiude Test Facility between March 26 and April 11, 2012. The tests, conducted collaboratively between NASA and NRC, focus on three key aspects in preparation for later scaling work to be conducted with a NACA 0012 airfoil model in the NRC Cascade rig: (1) cloud characterization, (2) scaling model development, and (3) ice-shape profile measurements. Regarding cloud characterization, the experiments focus on particle spectra measurements using two shadowgraphy methods, cloud uniformity via particle scattering from a laser sheet, and characterization of the SEA Multi-Element probe. Overviews of each aspect as well as detailed information on the diagnostic method are presented. Select results from the measurements and interpretation are presented which will help guide future work.

Proton conducting sol-gel sulfonated membranes produced from 2-allylphenol, 3-glycidoxypropyl trimethoxysilane and tetraethyl orthosilicate

NASA Astrophysics Data System (ADS)

Mosa, J.; Durán, A.; Aparicio, M.

An important research area in proton exchange membrane fuel cells (PEMFC) is devoted to the development of low cost membranes able to work at temperatures higher than 100 °C. In this work, homogeneous, transparent and crack-free hybrid membranes have been synthesized using tetraethyl orthosilicate (TEOS), 3-glycidoxipropyl trimethoxysilane (GPTMS) and 2-allylphenol (AP) as precursors. The synthesis of proton conducting membranes was performed by a post-sulfonation method using trimethylsilyl chlorosulfonate as a mild sulfonating agent. The water retention properties provided by sulfonate and hydroxyl groups and the high porosity leads to relatively high proton conductivity (maximum values around 1.3 × 10 -3 S cm -1 at 140 °C and 100% RH) for membranes treated at 180 °C and sulfonated for 2 h.

The Centrifuge Facility Life Sciences Glovebox configuration study

NASA Technical Reports Server (NTRS)

Sun, Sidney C.; Goulart, Carla V.

1992-01-01

Crew operations associated with nonhuman life sciences research on Space Station Freedom will be conducted in the Life Sciences Glovebox, whose enclosed work volume must accommodate numerous life science procedures. Two candidate Glovebox work volume concepts have been developed: one in which two operators work side-by-side, and another that conforms to the reach envelope of a single operator. Six test volunteers tested the concepts according to preestablished operational criteria. The wrap-around, single-operator concept has been judged the superior system.

NASA Research Announcement Phase 1 Report and Phase 2 Proposal for the Development of a Power Assisted Space Suit Glove Assembly

NASA Technical Reports Server (NTRS)

Cadogan, Dave; Lingo, Bob

1996-01-01

In July of 1996, ILC Dover was awarded Phase 1 of a contract for NASA to develop a prototype Power Assisted Space Suit glove to enhance the performance of astronauts during Extra-Vehicular Activity (EVA). This report summarizes the work performed to date on Phase 1, and details the work to be conducted on Phase 2 of the program. Phase 1 of the program consisted of research and review of related technical sources, concept brainstorming, baseline design development, modeling and analysis, component mock-up testing, and test data analysis. ILC worked in conjunction with the University of Maryland's Space Systems Laboratory (SSL) to develop the power assisted glove. Phase 2 activities will focus on the design maturation and the manufacture of a working prototype system. The prototype will be tested and evaluated in conjunction with existing space suit glove technology to determine the performance enhancement anticipated with the implementation of the power assisted joint technology in space suit gloves.

Scalability of Several Asynchronous Many-Task Models for In Situ Statistical Analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pebay, Philippe Pierre; Bennett, Janine Camille; Kolla, Hemanth

This report is a sequel to [PB16], in which we provided a first progress report on research and development towards a scalable, asynchronous many-task, in situ statistical analysis engine using the Legion runtime system. This earlier work included a prototype implementation of a proposed solution, using a proxy mini-application as a surrogate for a full-scale scientific simulation code. The first scalability studies were conducted with the above on modestly-sized experimental clusters. In contrast, in the current work we have integrated our in situ analysis engines with a full-size scientific application (S3D, using the Legion-SPMD model), and have conducted nu- mericalmore » tests on the largest computational platform currently available for DOE science ap- plications. We also provide details regarding the design and development of a light-weight asynchronous collectives library. We describe how this library is utilized within our SPMD- Legion S3D workflow, and compare the data aggregation technique deployed herein to the approach taken within our previous work.« less

Computer Simulation of an Electric Trolley Bus

DOT National Transportation Integrated Search

1979-12-01

This report describes a computer model developed at the Transportation Systems Center (TSC) to simulate power/propulsion characteristics of an urban trolley bus. The work conducted in this area is sponsored by the Urban Mass Transportation Administra...

Occupied Volume Integrity Testing : Elastic Test Results and Analyses

DOT National Transportation Integrated Search

2011-09-21

Federal Railroad Administration (FRA) and the Volpe Center have been conducting research into developing an alternative method of demonstrating occupied volume integrity (OVI) through a combination of testing and analysis. Previous works have been pu...

Certificate management entities for a connected vehicle environment : public workshop read-ahead document.

DOT National Transportation Integrated Search

2012-04-06

This document presents an overview of work conducted to date around development and analysis of organizational and operational models for certificate management in the connected vehicle environment. Functions, organizational models, technical backgro...

Feasibility of freight villages in the NYMTC region.

DOT National Transportation Integrated Search

2011-03-23

This report summarizes the work conducted to analyze the site impact of freight villages. The analysis included assessing traffic, : logistics and economic impacts, which are then used to determine the extent to which freight village development has ...

Synthesis of successful bicycle planning in mid-size cities.

DOT National Transportation Integrated Search

2011-01-01

The Texas Tech Center for Multidisciplinary Research in Transportation worked together with the Texas : Department of Transportation to conduct a survey of successful bicycle policies and practices in the United : States. The team developed and relea...

Biochemical Conversion: Using Enzymes, Microbes, and Catalysis to Make Fuels and Chemicals

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2013-07-26

This fact sheet describes the Bioenergy Technologies Office's biochemical conversion work and processes. BETO conducts collaborative research, development, and demonstration projects to improve several processing routes for the conversion of cellulosic biomass.

Factors affecting retention of allied health professionals working with people with disability in rural New South Wales, Australia: discrete choice experiment questionnaire development.

PubMed

Gallego, Gisselle; Dew, Angela; Bulkeley, Kim; Veitch, Craig; Lincoln, Michelle; Bundy, Anita; Brentnall, Jennie

2015-04-21

This paper describes the development of a discrete choice experiment (DCE) questionnaire to identify the factors (attributes) that allied health professionals (AHPs) working with people with disability identify as important to encouraging them to remain practising in rural areas. Focus groups and semi-structured interviews were conducted with 97 purposively selected service providers working with people with disability in rural New South Wales, Australia. Focus groups and interviews were digitally recorded, transcribed, and analysed using a modified grounded theory approach involving thematic analysis and constant comparison. Six attributes that may influence AHPs working with people with disability in rural areas to continue to do so were inductively identified: travel arrangements, work flexibility, professional support, professional development, remuneration, and autonomy of practice. The qualitative research information was combined with a policy review to define these retention factors and ensure that they are amenable to policy changes. The use of various qualitative research methods allowed the development of a policy-relevant DCE questionnaire that was grounded in the experience of the target population (AHPs).

Coaxial printing method for directly writing stretchable cable as strain sensor

NASA Astrophysics Data System (ADS)

Yan, Hai-liang; Chen, Yan-qiu; Deng, Yong-qiang; Zhang, Li-long; Hong, Xiao; Lau, Woon-ming; Mei, Jun; Hui, David; Yan, Hui; Liu, Yu

2016-08-01

Through applying the liquid metal and elastomer as the core and shell materials, respectively, a coaxial printing method is being developed in this work for preparing a stretchable and conductive cable. When liquid metal alloy eutectic Gallium-Indium is embedded into the elastomer matrix under optimized control, the cable demonstrates well-posed extreme mechanic performance, under stretching for more than 350%. Under developed compression test, the fabricated cable also demonstrates the ability for recovering original properties due to the high flowability of the liquid metal and super elasticity of the elastomeric shell. The written cable presents high cycling reliability regarding its stretchability and conductivity, two properties which can be clearly predicted in theoretical calculation. This work can be further investigated as a strain sensor for monitoring motion status including frequency and amplitude of a curved object, with extensive applications in wearable devices, soft robots, electronic skins, and wireless communication.

Coaxial printing method for directly writing stretchable cable as strain sensor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yan, Hai-liang; Chengdu Green Energy and Green Manufacturing Technology R&D Center, 610299 Chengdu; Chen, Yan-qiu, E-mail: yu.liu@vip.163.com, E-mail: cyqleaf@qq.com, E-mail: hyan@but.ac.cn

Through applying the liquid metal and elastomer as the core and shell materials, respectively, a coaxial printing method is being developed in this work for preparing a stretchable and conductive cable. When liquid metal alloy eutectic Gallium-Indium is embedded into the elastomer matrix under optimized control, the cable demonstrates well–posed extreme mechanic performance, under stretching for more than 350%. Under developed compression test, the fabricated cable also demonstrates the ability for recovering original properties due to the high flowability of the liquid metal and super elasticity of the elastomeric shell. The written cable presents high cycling reliability regarding its stretchabilitymore » and conductivity, two properties which can be clearly predicted in theoretical calculation. This work can be further investigated as a strain sensor for monitoring motion status including frequency and amplitude of a curved object, with extensive applications in wearable devices, soft robots, electronic skins, and wireless communication.« less

Refractory materials for high-temperature thermoelectric energy conversion

NASA Technical Reports Server (NTRS)

Wood, C.; Emin, D.

1983-01-01

Theoretical work of two decades ago adequately explained the transport behavior and effectively guided the development of thermoelectric materials of high conversion efficiencies of conventional semiconductors (e.g., SiGe alloys). The more significant contributions involved the estimation of optimum doping concentrations, the reduction of thermal conductivity by solid solution doping and the development of a variety of materials with ZT approx. 1 in the temperature range 300 K to 1200 K. ZT approx. 1 is not a theoretical limitation although, experimentally, values in excess of one were not achieved. Work has continued with emphasis on higher temperature energy conversion. A number of promising materials have been discovered in which it appears that ZT 1 is realizable. These materials are divided into two classes: (1) the rare-earth chalcogenides which behave as itinerant highly-degenerate n-type semiconductors at room-temperature, and (2) the boron-rich borides, which exhibit p-type small-polaronic hopping conductivity.

Recovery Act: Novel Kerf-Free PV Wafering that provides a low-cost approach to generate wafers from 150um to 50um in thickness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fong, Theodore E.

2013-05-06

The technical paper summarizes the project work conducted in the development of Kerf-Free silicon wafering equipment for silicon solar wafering. This new PolyMax technology uses a two step process of implantation and cleaving to exfoliate 50um to 120um wafers with thicknesses ranging from 50um to 120um from a 125mm or 156mm pseudo-squared silicon ingot. No kerf is generated using this method of wafering. This method of wafering contrasts with the current method of making silicon solar wafers using the industry standard wire saw equipment. The report summarizes the activity conducted by Silicon Genesis Corporation in working to develop this technologymore » further and to define the roadmap specifications for the first commercial proto-type equipment for high volume solar wafer manufacturing using the PolyMax technology.« less

X-48B Phase 1 Flight Maneuver Database and ICP Airspace Constraint Analysis

NASA Technical Reports Server (NTRS)

Fast, Peter Alan

2010-01-01

The work preformed during the Summer 2010 by Peter Fast. The main tasks assigned were to update and improve the X-48 Flight Maneuver Database and conduct an Airspace Constraint Analysis for the Remotely Operated Aircraft Area used to flight test Unmanned Arial Vehicles. The final task was to develop and demonstrate a working knowledge of flight control theory.

Tahitian Words for Race and Class. Working Papers of the Language Behavior Research Laboratory, No. 40.

ERIC Educational Resources Information Center

Kay, Paul

This volume is based on field work conducted in 1960 in Papeete and in a rural district of Tahiti, under the guidance of Douglas Oliver. Section two, which is based on a Ph.D. thesis (Kay 1963), develops the hypothesis that Tahitian words for social classification and the common French translations are semantically equivalent for most native…

Occupational Training Plans for Disadvantaged and Handicapped Students in Vocational Education. A Manual for Use in Cooperative Work Experience Programs.

ERIC Educational Resources Information Center

Eley, Robert K., Ed.

This manual, developed to provide vocational instructors or coordinators with model training plans to be used to conduct concurrent work and education programs for disadvantaged and handicapped students, has the purposes of: (1) serving as a description of the kinds of content that should be included in a training plan, (2) serving as an example…

Piloting a Savings-Led Microfinance Intervention with Women Engaging in Sex Work in Mongolia: Further Innovation for HIV Risk Reduction

PubMed Central

Tsai, Laura Cordisco; Witte, Susan S.; Aira, Toivgoo; Altantsetseg, Batsukh; Riedel, Marion

2014-01-01

This paper describes a pilot study testing the feasibility of an innovative savings-led microfinance intervention in increasing the economic empowerment and reducing the sexual risk behavior of women engaging in sex work in Mongolia. Women’s economic vulnerability may increase their risk for HIV by compromising their ability to negotiate safer sex with partners and heightening the likelihood they will exchange sex for survival. Microfinance has been considered a potentially powerful structural HIV prevention strategy with women conducting sex work, as diversification of income sources may increase women’s capacity to negotiate safer transactional sex. With 50% of all reported female HIV cases in Mongolia detected among women engaging in sex work, direct prevention intervention with women conducting sex work represents an opportunity to prevent a potentially rapid increase in HIV infection in urban Mongolia. The piloted intervention consisted of a matched savings program in which matched savings could be used for business development or vocational education, combined with financial literacy and business development training for women engaging in sex work. Results of the pilot demonstrate participants’ increased confidence in their ability to manage finances, greater hope for pursuing vocational goals, moderate knowledge gains regarding financial literacy, and an initial transition from sex work to alternative income generation for five out of nine participants. The pilot findings highlight the potential for such an intervention and the need for a clinical trial testing the efficacy of savings-led microfinance programs in reducing HIV risk for women engaging in sex work in Mongolia. PMID:24900163

Piloting a Savings-Led Microfinance Intervention with Women Engaging in Sex Work in Mongolia: Further Innovation for HIV Risk Reduction.

PubMed

Tsai, Laura Cordisco; Witte, Susan S; Aira, Toivgoo; Altantsetseg, Batsukh; Riedel, Marion

2011-12-30

This paper describes a pilot study testing the feasibility of an innovative savings-led microfinance intervention in increasing the economic empowerment and reducing the sexual risk behavior of women engaging in sex work in Mongolia. Women's economic vulnerability may increase their risk for HIV by compromising their ability to negotiate safer sex with partners and heightening the likelihood they will exchange sex for survival. Microfinance has been considered a potentially powerful structural HIV prevention strategy with women conducting sex work, as diversification of income sources may increase women's capacity to negotiate safer transactional sex. With 50% of all reported female HIV cases in Mongolia detected among women engaging in sex work, direct prevention intervention with women conducting sex work represents an opportunity to prevent a potentially rapid increase in HIV infection in urban Mongolia. The piloted intervention consisted of a matched savings program in which matched savings could be used for business development or vocational education, combined with financial literacy and business development training for women engaging in sex work. Results of the pilot demonstrate participants' increased confidence in their ability to manage finances, greater hope for pursuing vocational goals, moderate knowledge gains regarding financial literacy, and an initial transition from sex work to alternative income generation for five out of nine participants. The pilot findings highlight the potential for such an intervention and the need for a clinical trial testing the efficacy of savings-led microfinance programs in reducing HIV risk for women engaging in sex work in Mongolia.

Analysis of the error of the developed method of determination the active conductivity reducing the insulation level between one phase of the network and ground, and insulation parameters in a non-symmetric network with isolated neutral with voltage above 1000 V

NASA Astrophysics Data System (ADS)

Utegulov, B. B.

2018-02-01

In the work the study of the developed method was carried out for reliability by analyzing the error in indirect determination of the insulation parameters in an asymmetric network with an isolated neutral voltage above 1000 V. The conducted studies of the random relative mean square errors show that the accuracy of indirect measurements in the developed method can be effectively regulated not only by selecting a capacitive additional conductivity, which are connected between phases of the electrical network and the ground, but also by the selection of measuring instruments according to the accuracy class. When choosing meters with accuracy class of 0.5 with the correct selection of capacitive additional conductivity that are connected between the phases of the electrical network and the ground, the errors in measuring the insulation parameters will not exceed 10%.

System analysis study of space platform and station accommodations for life sciences research facilities. Volume 1: Executive summary. Phase A: Conceptual design and programmatics

NASA Technical Reports Server (NTRS)

1985-01-01

The study was conducted in 3 parts over a 3 year period. The study schedule and the documentation associated with each study part is given. This document summarized selected study results from the conceptual design and programmatics segment of the effort. The objectives were: (1) to update requirements and tradeoffs and develop a detailed design and mission requirements document; (2) to develop conceptual designs and mission descriptions; and (3) to develop programmatic, i.e., work breakdown structure and work breakdown structure dictionary, estimated cost, and implementing plans and schedules.

Flat plate solar collector for water pre-heating using concentrated solar power (CSP)

NASA Astrophysics Data System (ADS)

Peris, Leonard Sunny; Shekh, Md. Al Amin; Sarker, Imran

2017-12-01

Numerous attempt and experimental conduction on different methods to harness energy from renewable sources are being conducted. This study is a contribution to the purpose of harnessing solar energy as a renewable source by using flat plate solar collector medium to preheat water. Basic theory of solar radiation and heat convection in water (working fluid) has been combined with heat conduction process by using copper tubes and aluminum absorber plate in a closed conduit, covered with a glazed through glass medium. By this experimental conduction, a temperature elevation of 35°C in 10 minutes duration which is of 61.58% efficiency range (maximum) has been achieved. The obtained data and experimental findings are validated with the theoretical formulation and an experimental demonstration model. A cost effective and simple form of heat energy extraction method for space heating/power generation has been thoroughly discussed with possible industrial implementation possibilities. Under-developed and developing countries can take this work as an illustration for renewable energy utilization for sustainable energy prospect. Also a full structure based data to derive concentrated solar energy in any geographical location of Bangladesh has been outlined in this study. These research findings can contribute to a large extent for setting up any solar based power plant in Bangladesh irrespective of its installation type.

Bridging worlds/charting new courses

NASA Astrophysics Data System (ADS)

This report describes the work being done within Sandia's renewable energy program. This work touches on four major disciplines. (1) Photovoltaics. The goal of this project is to develop costeffective, reliable energy system technologies for energy supplies worldwide produced by U.S. industry. It encompasses cell research and development, collector development, technology evaluation, systems engineering, domestic and international applications, and design assistance. (2) Solar Thermal. This project endeavors to develop and increase acceptance of solar thermal electric and industrial technologies as cost-competitive candidates for power generation and to promote their commercialization. Its' major activities are with dish/Stirling systems, the Solar Two power tower, design assistance to industry and users, technology development and research activities. (3) Wind. The wind project impacts domestic and international markets with commercially feasible systems for utility-scale and other applications of wind energy. The project conducts applied research in aerodynamics, structural dynamics, fatigue, materials and controls, and engineering systems, and develops cooperative work with industry. (4) Geothermal. This project is developing technology to increase proven geothermal reserves and is assisting industry in expanding geothermal power on-line. Development work is in stemhole drilling, drilling techniques, instrumentation for geothermal wells, acoustic telemetry, and drilling exploratory wells.

Series: Clinical Epidemiology in South Africa. Paper 1: Evidence-based health care and policy in Africa: past, present, and future.

PubMed

Young, Taryn; Garner, Paul; Clarke, Mike; Volmink, Jimmy

2017-03-01

Africa has high disease burden and health system challenges but is making progress in recognizing, accepting, and adopting evidence-based health care (EBHC). In this article, we reflect on the developments of the past 2 decades and consider further steps that will help with the translation of reliable research results into the decision making process. There has been a rapid growth in various initiatives to promote EBHC in the African region. These include the conduct and reporting of primary and secondary research, research capacity development and supportive initiatives, access to information, and work with decision makers in getting research into clinical guidelines and health policies. Much, however, still needs to be done to improve the impact on health in the region. A multipronged approach consisting of regionally relevant well-conducted research addressing priority health problems, increased uptake of research in health care policy and practice, dedicated capacity development initiatives to support the conduct as well as use of research, facilitated by wider collaboration, and equitable partnerships will be important. Working together in mutually supporting partnerships is key to advancing both evidence-informed health care practices and better health. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

ORNL superconducting technology program for electric energy systems

NASA Astrophysics Data System (ADS)

Hawsey, R. A.

1993-02-01

The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy's (DOE's) Office of Conservation and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and systems development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY-92 Peer Review of Projects, which was conducted by DOE's Office of Program Analysis, Office of Energy Research. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making tremendous progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

Participation of V. S. Vladimirov in work on the USSR atomic project: A significant milestone in the development of the foundations of mathematical modeling of the processes of neutron physics

NASA Astrophysics Data System (ADS)

Trutnev, Yu. A.; Shagaliev, R. M.; Evdokimov, V. V.; Bochkov, A. I.

2013-02-01

This paper is dedicated to the 90th anniversary of the birth of a leading Soviet and Russian scientist and a member of the USSR Academy of Sciences: Academician Vasilii Sergeevich Vladimirov. Vladimirov, one of the strongest contemporary mathematicians, worked from 1951 through 1955 at KB-11 (today, the Russian Federal Nuclear Center — All-Russian Scientific Research Institute for Experimental Physics), the "secret facility" where development of atomic weaponry was conducted. We present the main results of Vladimirov's scientific activity connected with his work on the USSR atomic project.

Organization Readiness and ERP Implementation in Albaha University

NASA Astrophysics Data System (ADS)

Alaqeel, K.; Shakkah, M. S.; Rahmat, R. F.; Alfageeh, A.; Budiarto, R.

2017-04-01

This work studies the correlation between the organizational readiness in Albaha University and the respective Critical Success Factors with regards to the Enterprise Resource Planning (ERP) implementation. The study also considers some suggestions to improve the ABU’s ERP systems and roadmap towards the self -development strategy and to reduce vendor-dependency. A survey regarding ERP to the end-users, experts and developers in Albaha University was conducted. The analysis of the results in this work confirmed with the results of an existing work. The four significance success factors: Project Management, Business Process Re-engineering, System Integration, and Training and Education are recommended to be adopted to assure the smooth adoption of ERP at Albaha University.

Design of a trial-based economic evaluation on the cost-effectiveness of employability interventions among work disabled employees or employees at risk of work disability: The CASE-study

PubMed Central

2012-01-01

Background In the Netherlands, absenteeism and reduced productivity due to work disability lead to high yearly costs reaching almost 5% of the gross national product. To reduce the economic burden of sick leave and reduced productivity, different employability interventions for work-disabled employees or employees at risk of work disability have been developed. Within this study, called 'CASE-study' (Cost-effectiveness Analysis of Sustainable Employability), five different employability interventions directed at work disabled employees with divergent health complaints will be analysed on their effectiveness and cost-effectiveness. This paper describes a consistent and transparent methodological design to do so. Methods/design Per employability intervention 142 participants are needed whereof approximately 66 participants receiving the intervention will be compared with 66 participants receiving usual care. Based on the intervention-specific characteristics, a randomized control trial or a quasi-experiment with match-criteria will be conducted. Notwithstanding the study design, eligible participants will be employees aged 18 to 63, working at least 12 h per week, and at risk of work disability, or already work-disabled due to medical restrictions. The primary outcome will be the duration of sick leave. Secondary outcomes are health status and quality of life. Outcomes will be assessed at baseline and then 6, 12 and 18 months later. Economic costs will consist of healthcare costs and cost of lost production due to work disability, and will be evaluated from a societal perspective. Discussion The CASE-study is the first to conduct economic evaluations of multiple different employability interventions based on a similar methodological framework. The cost-effectiveness results for every employability intervention will be published in 2014, but the methods, strengths and weaknesses of the study protocol are discussed in this paper. To contribute to treatment options in occupational health practice and enable the development of guidelines on how to conduct economic evaluation better suited to this field; this paper provides an important first step. Trial registration Four trials involved in the CASE-study are registered with the Netherlands Trial Registry: Care for Work (NTR2886), Health and Motion (NTR3111), Guidance to Excel in Return to Work (NTR3151), Care for Companies/Second Care (NTR3136). PMID:22257557

Conductive ink print on PA66 gear for manufacturing condition monitoring sensors

NASA Astrophysics Data System (ADS)

Futagawa, Shintaro; Iba, Daisuke; Kamimoto, Takahiro; Nakamura, Morimasa; Miura, Nanako; Iizuka, Takashi; Masuda, Arata; Sone, Akira; Moriwaki, Ichiro

2018-03-01

Failures detection of rotating machine elements, such as gears, is an important issue. The purpose of this study was to try to solve this issue by printing conductive ink on gears to manufacture condition-monitoring sensors. In this work, three types of crack detection sensor were designed and the sprayed conductive ink was directly sintered on polyimide (PI) - coated polyamide (PA) 66 gears by laser. The result showed that it was possible to produce narrow circuit lines of the conductive ink including Ag by laser sintering technique and the complex shape sensors on the lateral side of the PA66 gears, module 1.0 mm and tooth number 48. A preliminary operation test was carried out for investigation of the function of the sensors. As a result of the test, the sensors printed in this work should be effective for detecting cracks at tooth root of the gears and will allow for the development of better equipment and detection techniques for health monitoring of gears.

Code of Conduct on Biosecurity for Biological Resource Centres: procedural implementation.

PubMed

Rohde, Christine; Smith, David; Martin, Dunja; Fritze, Dagmar; Stalpers, Joost

2013-07-01

A globally applicable code of conduct specifically dedicated to biosecurity has been developed together with guidance for its procedural implementation. This is to address the regulations governing potential dual-use of biological materials, associated information and technologies, and reduce the potential for their malicious use. Scientists researching and exchanging micro-organisms have a responsibility to prevent misuse of the inherently dangerous ones, that is, those possessing characters such as pathogenicity or toxin production. The code of conduct presented here is based on best practice principles for scientists and their institutions working with biological resources with a specific focus on micro-organisms. It aims to raise awareness of regulatory needs and to protect researchers, their facilities and stakeholders. It reflects global activities in this area in response to legislation such as that in the USA, the PATRIOT Act of 2001, Uniting and Strengthening America by Providing Appropriate Tools Required to Intercept and Obstruct Terrorism Act of 2001; the Anti-Terrorism Crime and Security Act 2001 and subsequent amendments in the UK; the EU Dual-Use Regulation; and the recommendations of the Organization for Economic Co-operation and Development (OECD), under their Biological Resource Centre (BRC) Initiative at the beginning of the millennium (OECD, 2001). Two project consortia with international partners came together with experts in the field to draw up a Code of Conduct on Biosecurity for BRCs to ensure that culture collections and microbiologists in general worked in a way that met the requirements of such legislation. A BRC is the modern day culture collection that adds value to its holdings and implements common best practice in the collection and supply of strains for research and development. This code of conduct specifically addresses the work of public service culture collections and describes the issues of importance and the controls or practices that should be in place. However, these best practices are equally applicable to all other microbiology laboratories holding, using and sharing microbial resources. The code was introduced to the Seventh Review Conference to the Biological and Toxin Weapons Convention (BTWC), United Nations, Geneva, 2011; the delegates to the States' parties recommended that this code of conduct be broadly applied in the life sciences and disseminated amongst microbiologists, hence the publishing of it here along with practical implementation guidance. This paper considers the regulatory and working environment for microbiology, defines responsibilities and provides practical advice on the implementation of best practice in handling the organism itself, associated data and technical know-how.

Beyond the classical theory of heat conduction: a perspective view of future from entropy

PubMed Central

Lai, Xiang; Zhu, Pingan

2016-01-01

Energy is conserved by the first law of thermodynamics; its quality degrades constantly due to entropy generation, by the second law of thermodynamics. It is thus important to examine the entropy generation regarding the way to reduce its magnitude and the limit of entropy generation as time tends to infinity regarding whether it is bounded or not. This work initiates such an analysis with one-dimensional heat conduction. The work not only offers some fundamental insights of universe and its future, but also builds up the relation between the second law of thermodynamics and mathematical inequalities via developing the latter of either new or classical nature. A concise review of entropy is also included for the interest of performing the analysis in this work and the similar analysis for other processes in the future. PMID:27843400

Ultrahigh Ionic Conduction in Water-Stable Close-Packed Metal-Carbonate Frameworks.

PubMed

Manna, Biplab; Desai, Aamod V; Illathvalappil, Rajith; Gupta, Kriti; Sen, Arunabha; Kurungot, Sreekumar; Ghosh, Sujit K

2017-08-21

Utilization of the robust metal-carbonate backbone in a series of water-stable, anionic frameworks has been harnessed for the function of highly efficient solid-state ion-conduction. The compact organization of hydrophilic guest ions facilitates water-assisted ion-conduction in all the compounds. The dense packing of the compounds imparts high ion-conducting ability and minimizes the possibility of fuel crossover, making this approach promising for design and development of compounds as potential components of energy devices. This work presents the first report of evaluating ion-conduction in a purely metal-carbonate framework, which exhibits high ion-conductivity on the order of 10 -2 S cm -1 along with very low activation energy, which is comparable to highly conducting well-known crystalline coordination polymers or commercialized organic polymers like Nafion.

Measuring the Nursing Work Environment in Mainland China: Further Development of the Chinese Nursing Work Environment Scale.

PubMed

Shao, Jing; Tang, Leiwen; Ye, Zhihong

For the stabilization of the nursing profession in mainland China, a valid and reliable nursing work environment instrument, grounded in China's context, should be developed to better provide rigorous evidence for policy makers. The purpose of the current research was to further develop a scale that could capture the characteristics of the nursing work environment in mainland China. A convenience sample of 542 nurses employed in a tertiary hospital of mainland China completed the 108-item Chinese Nursing Work Environment (C-NWE) Scale (1st ed.). Items that did not differentiate between respondents with the highest and lowest 27% of total scores and those that did not meet criteria for factor loadings were set aside. Exploratory factor analysis based on the maximum likelihood method was used to identify the structure of the scale. The chi-square test was used to evaluate model fit, and expert review was conducted to test content validity. Reliability was estimated using Cronbach's alpha coefficient. The revised C-NWE Scale, which consists of nine subscales and 47 items, is a simplified version of the C-NWE (1st ed.). Using exploratory maximum likelihood factor analysis, the normed chi-square fit index for a nine-factor solution was 1.97. The content validity index for the total scale was 0.93; Cronbach's alpha was .94. Initial evidence of the psychometric properties of C-NWE scores was presented. Further studies could be conducted in various settings to identify the C-NWE Scale's validity and reliability.

Reports of Planetary Geology Program, 1982

NASA Technical Reports Server (NTRS)

Holt, H. E. (Compiler)

1982-01-01

Work conducted in the Planetary Geology program is summarized. The following categories are presented: outer solar system satellites; asteroids and comets; Venus; cratering processes and landform development; volcanic processes and landforms; aolian processes and landforms; fluvial processes and landform development; periglacial and permafrost processes; structure, tectonics and stratigraphy; remote sensing and regolith studies; geologic mapping, cartography and geodesy.

Supplementing Art Curriculum. I, Glass. II. Local Evaluation Report, Fiscal Year 1973.

ERIC Educational Resources Information Center

Kohtz, Karen

A local evaluation report and an information packet describing activities developed under this mini-grant deal with a supplemental art curriculum on glass work. Over a four month period, a glass workshop was planned to emphasize the creative possibilities of glass and information packets were developed to train teachers to conduct classroom art…

Examining of Model Eliciting Activities Developed by Mathematics Student Teachers

ERIC Educational Resources Information Center

Dede, Ayse Tekin; Hidiroglu, Çaglar Naci; Güzel, Esra Bukova

2017-01-01

The purpose of this study is to examine the model eliciting activities developed by the mathematics student teachers in the context of the principles of the model eliciting activities. The participants of the study conducted as a case study design were twenty one mathematics student teachers working on seven groups. The data collection tools were…

The Expertise in Working with Pedagogically Neglected Adolescents on the Example of German Universities

ERIC Educational Resources Information Center

Pylypyk, Katherine N.

2016-01-01

The article deals with the attitudes of German scientists towards the levels and identification methods of pedagogical neglect. The experience of German scientists in self-development and skills' development of academic staff to conduct relationship with pedagogically neglected adolescents was studied for the first time. The aim of the study is to…

Powder-driven-nail connections for round timber

Treesearch

Ronald W. Wolfe; KugBo Shim; Marshall Begel

2003-01-01

In an effort to encourage the development of value-added engineered applications for small diameter round timber, research is being conducted at the US Forest Products Laboratory to develop and verify design guidelines for connections with specific application to round timbers. The objective of this work is to provide potential users with a number of viable connection...

Development and Validation of the Job Crafting Scale

ERIC Educational Resources Information Center

Tims, Maria; Bakker, Arnold B.; Derks, Daantje

2012-01-01

We developed and validated a scale to measure job crafting behavior in three separate studies conducted in The Netherlands (total N=1181). Job crafting is defined as the self-initiated changes that employees make in their own job demands and job resources to attain and/or optimize their personal (work) goals. In Study 1 and 2 the Dutch job…

Developing and Assessing College Student Teamwork Skills

ERIC Educational Resources Information Center

Hughes, Richard L.; Jones, Steven K.

2011-01-01

Some form of team-oriented work is employed in most, if not all, organizations today. It would seem, then, that an important role for higher education should involve developing critical teamwork skills among students so as to prepare them for success in life. This very point was highlighted in a 2009 poll conducted on behalf of the Association of…

Child Development and the Coworking of Doctor and Teacher: A Waldorf School Doctor's Perspective.

ERIC Educational Resources Information Center

Karnow, Gerald F.

This paper draws on the nearly 20 years' experiences of a school doctor working with teachers at the Rudolf Steiner School in New York City to describe general principles of assessing child development in relation to educational progress. The paper contrasts the customary role of school doctors (related to conducting physical examinations for…

109(b) State Training Center Facility Assessment, Program Evaluation, and Guide Development. Final Report.

ERIC Educational Resources Information Center

Miklas, Michael P., Jr.

Section 109(b) of the 1972 Federal Water Pollution Control Act Amendments authorized funding for the construction of statewide water treatment training facilities. Described in this report is work conducted by Southwest Research Institute (SwRI) to: (1) aid in developing updated 109(b) Guidance Documents; (2) characterize and evaluate existing…

Development of methods to detect occurrence and effects of endocrine-disrupting chemicals: A fundamental shift in regulatory ecotoxicology

EPA Science Inventory

This is an editorial in ET&C describing the newer pathway-specific test methods for EDCs and their effect on ecotoxicology. Work conducted to support the development and application of these types of assays promises to be an important catalyst to advance the field of ecotoxicolo...

The SPACELAB Project: A Transatlantic challenge for Europe

NASA Technical Reports Server (NTRS)

Ottemeyer, D. R.

1981-01-01

The contribution of Europe to the U.S. space program is related to the development of Spacelab. The Federal Republic of Germany is to contribute 53% and Italy 18% of the expenses. The industrial team conducting the development work for the Spacelab consists of experts from firms of the ten nations participating financially in the program. Attention is given to organizational problems, details on the development program, aspects of mission preparation, and future developments.

Communications data delivery system analysis : public workshop read-ahead document.

DOT National Transportation Integrated Search

2012-04-09

This document presents an overview of work conducted to date around development and analysis of communications data delivery systems for supporting transactions in the connected vehicle environment. It presents the results of technical analysis of co...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, Wayne; Borders, Tammie

INL successfully developed a proof of concept for "Software Defined Anything" by emulating the laboratory's business applications that run on Virtual Machines. The work INL conducted demonstrates to industry on how this methodology can be used to improve security, automate and repeat processes, and improve consistency.

Cookstove Laboratory Research - Fiscal Year 2016 Report

EPA Science Inventory

This report provides an overview of the work conducted by the EPA cookstove laboratory research team in Fiscal Year 2016. The report describes research and activities including (1) ISO standards development, (2) capacity building for international testing and knowledge centers, ...

14 CFR 1274.902 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... cooperative agreement is to conduct a shared resource project that will lead to ________. This cooperative agreement will advance the technology developments and research which have been performed on The specific objective is to This work will culminate in [End of provision] ...

Motor learning and working memory in children born preterm: a systematic review.

PubMed

Jongbloed-Pereboom, Marjolein; Janssen, Anjo J W M; Steenbergen, Bert; Nijhuis-van der Sanden, Maria W G

2012-04-01

Children born preterm have a higher risk for developing motor, cognitive, and behavioral problems. Motor problems can occur in combination with working memory problems, and working memory is important for explicit learning of motor skills. The relation between motor learning and working memory has never been reviewed. The goal of this review was to provide an overview of motor learning, visual working memory and the role of working memory on motor learning in preterm children. A systematic review conducted in four databases identified 38 relevant articles, which were evaluated for methodological quality. Only 4 of 38 articles discussed motor learning in preterm children. Thirty-four studies reported on visual working memory; preterm birth affected performance on visual working memory tests. Information regarding motor learning and the role of working memory on the different components of motor learning was not available. Future research should address this issue. Insight in the relation between motor learning and visual working memory may contribute to the development of evidence based intervention programs for children born preterm. Copyright © 2012 Elsevier Ltd. All rights reserved.

The relationship between work and home characteristics and work engagement in medical residents.

PubMed

Verweij, Hanne; van Hooff, Madelon L M; van der Heijden, Frank M M A; Prins, Jelle T; Lagro-Janssen, Antoine L M; van Ravesteijn, Hiske; Speckens, Anne E M

2017-08-01

Work engagement is important for medical residents and the healthcare organizations they work for. However, relatively little is known about the specific predictors of work engagement in medical residents. Therefore, we examined the associations of work and home characteristics, and work-home interference with work engagement in male and female residents. This study was conducted on a nationwide sample of medical residents. In 2005, all Dutch medical residents (n = 5245) received a self-report questionnaire. Path analysis was used to examine the associations between the potential predictors and work engagement. In total, 2115 (41.1%) residents completed the questionnaire. Job characteristics, home characteristics and work-home interference were associated with work engagement. Important positive contributing factors of work engagement were opportunities for job development, mental demands at work, positive work-home interference and positive home-work interference. Important negative contributing factors were emotional demands at work and negative home-work interference. The influence of these factors on work engagement was similar in male and female residents. Opportunities for job development and having challenging work are of high relevance in enhancing work engagement. Furthermore, interventions that teach how to deal skilfully with emotional demands at work and home-work interference are expected to be the most effective interventions to enhance work engagement in medical residents.

Doing more with less in nursing work: a review of the literature.

PubMed

Bradley, C

1999-09-01

The paper explores the literature on changes in nursing work. It examines the suggestion that changes in work practices are management responses to cost cutting imperatives. Nursing labour force issues such as staffing roles and staffing mix, the push for flexibility in the workforce and casualisation are discussed. The paper concludes that given the rise of casual work in the general Australian workforce, research needs to be conducted on the extent of casualisation of nursing, and the implications this may have for nursing practice, professional development and on the nursing labour market.

[Work accommodation at the time of Return-to-Work for workers on sick leave: a qualitative systematic review with recommendations for Return-to-work Guidance 2017].

PubMed

Nogawa, Kazuhiro; Kojimahara, Noriko

2018-05-31

We conducted a systematic review to determine whether work accommodation at the time of return-to-work (RTW) following a period of sick leave would improve work-related outcomes. Using a Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach, we developed recommendations applicable to the field of occupational health in Japan. We approached our review question for "Evidence-based Return-to-work Guidance in Occupational Health 2017 (RTW 2017) " using a PICO framework (P: workers on sick leave; I: work accommodation; C: usual care; O: improvement of work-related outcomes, such as shortened sick leave period or lower rate of sick leave recurrence). To identify relevant intervention studies about work accommodation at the time of RTW, for example, modified work or partial RTW, we searched Cochrane Library, PubMed, and ICHUSHI Web using keywords/phrases such as workplace accommodation, partial RTW, rehabilitation, and modified work. Although we found no systematic reviews, we did identify 632 randomized controlled trials and cohort studies. Two researchers screened them independently using selection and exclusion criteria defined by the RTW guidance committee in the scope. For intervention studies, we extracted PICO and evaluated risk of bias using RevMan 5.3. For cohort studies, we applied the Newcastle-Ottawa scale for evaluation of risk of bias. We then evaluated the body of evidence based on risk of bias, indirectness, inconsistency, imprecision, and publication bias using GRADEPro GDT. Finally, we adopted Evidence to Decision from GRADE and developed recommendations based on anonymous panels' votes. We identified three relevant studies, which were one randomized controlled trial and two cohort studies, on Partial RTW or modified work for musculoskeletal disorders. Although we could not conduct a meta-analysis, our qualitative systematic review of these studies led us to conclude that partial RTW could shorten the period of sick leave and modified work could lower the recurrence rates of sick leave. Therefore, "Work accommodation at the time of RTW could be provided for workers on sick leave for musculoskeletal disorders" was weakly recommended on the basis of low evidence. Our recommendation, though plausible, is weak, as it is based on evidence from a small number of studies of foreign occupational health systems. Development of robust recommendations will require accumulation of additional information on diverse factors, such as cost-effectiveness, and on other diseases, for example, mental health disorders or malignant diseases, in Japan.

The effect of job and environmental factors on job satisfaction in automotive industries.

PubMed

Dawal, Siti Zawiah Md; Taha, Zahari

2006-01-01

A methodology was developed for diagnosing industrial work, which includes questionnaire, observation, measurements, data collection and statistical analysis. A survey was conducted to investigate the relationship between job satisfaction and factors that affect work design in 2 automotives manufacturing companies in Malaysia. A basic work design model was proposed. The aim of this model was to determine the factors that influence employees' perception towards their work. A set of multiple-choice questionnaires was developed and data was collected by interviewing employees at a production plant. The survey focused on job and environmental factors. The results supported the proposed model and showed that job and environmental factors were significantly related to job satisfaction. They highlighted the significant influence of age, work experience and marital status on job satisfaction. Further, environmental factors, especially the surroundings, context dependence and the building's function, also had a significant impact on job satisfaction.

Enhancing the vocational outcomes of people with chronic disabilities caused by a musculoskeletal condition: development and evaluation of content of self-management training modules.

PubMed

Johnston, V; Strong, J; Gargett, S; Jull, G; Ellis, N

2014-01-01

No self-management interventions have been developed to empower those chronically disabled by a musculoskeletal condition to find and/or remain at work. Developand evaluate the content of two self-management training modules to improve vocational outcomes for those with chronic musculoskeletal disorders. Stanford University's Chronic Disease Self-Management Program provided the framework for the new modules. Focus groups with the eightpersons with workdisabilities and concept-mapping sessions with the 12 experienced vocational rehabilitation professionals were conducted to identify factors and themes contributing to workers remaining/returning to work post-injury. Five experienced self-management trainers reviewed the modules for consistency with self-management principles. Two new self-management modules: 'Navigating the System' and 'Managing a Return to Work' were developed.The persons with work disabilitiesgenerated four themes: accepting and coping with injury; skills to manage pain and life; positive working relationships and, re-inventing self, whereas the rehabilitation professionals identified three themes:communication and support of others; the injured worker's abilities and resources, and knowledge and education. Anintervention developed to enhance self-management skills and facilitate positive vocational outcomes of those seeking to return to work post-injury was confirmed as relevant by persons with work disabilities, rehabilitation professionals and self-management trainers.

Nonstandard working schedules and health: the systematic search for a comprehensive model.

PubMed

Merkus, Suzanne L; Holte, Kari Anne; Huysmans, Maaike A; van Mechelen, Willem; van der Beek, Allard J

2015-10-23

Theoretical models on shift work fall short of describing relevant health-related pathways associated with the broader concept of nonstandard working schedules. Shift work models neither combine relevant working time characteristics applicable to nonstandard schedules nor include the role of rest periods and recovery in the development of health complaints. Therefore, this paper aimed to develop a comprehensive model on nonstandard working schedules to address these shortcomings. A literature review was conducted using a systematic search and selection process. Two searches were performed: one associating the working time characteristics time-of-day and working time duration with health and one associating recovery after work with health. Data extracted from the models were used to develop a comprehensive model on nonstandard working schedules and health. For models on the working time characteristics, the search strategy yielded 3044 references, of which 26 met the inclusion criteria that contained 22 distinctive models. For models on recovery after work, the search strategy yielded 896 references, of which seven met the inclusion criteria containing seven distinctive models. Of the models on the working time characteristics, three combined time-of-day with working time duration, 18 were on time-of-day (i.e. shift work), and one was on working time duration. The model developed in the paper has a comprehensive approach to working hours and other work-related risk factors and proposes that they should be balanced by positive non-work factors to maintain health. Physiological processes leading to health complaints are circadian disruption, sleep deprivation, and activation that should be counterbalanced by (re-)entrainment, restorative sleep, and recovery, respectively, to maintain health. A comprehensive model on nonstandard working schedules and health was developed. The model proposes that work and non-work as well as their associated physiological processes need to be balanced to maintain good health. The model gives researchers a useful overview over the various risk factors and pathways associated with health that should be considered when studying any form of nonstandard working schedule.

STS-55 Payload Specialist Schlegel collects fungi sample at SL-D2 Rack 1

NASA Technical Reports Server (NTRS)

1993-01-01

STS-55 German Payload Specialist 2 Hans Schlegel, wearing lightweight headset, collects fungi sample while working at Spacelab Deutsche 2 (SL-D2) science module Rack 1 Work Bench. Schlegel is conducting these procedures in conjunction with the 'Fruiting Body Development of Fungi' experiment. Schlegel was one of two payload specialists representing the German Aerospace Research Establishment (DLR) on the 10-day spacelab mission.

Chaos, Complexity and Deterrence

DTIC Science & Technology

2000-04-19

populations of adversary countries but which seldom affect their leadership . Conclusion The jury is still out on the applicability of chaos theory to...Advent of Chaos Chaos theory in the West (considerable work on chaos was also conducted in the Soviet Union) developed from the 1960s work of...predicted by his model over time.1 This discovery, sensitivity to initial conditions, is one of the fundamental characteristics of chaos theory . Lorenz

TRAC-Monterey FY16 Work Program Development and Report of Research Elicitation

DTIC Science & Technology

2016-01-01

any changes to priorities or additional projects that require immediate research. Work Program; Research Elicitation Unclassified UU UU UU UU 35 MAJ...conduct analysis for the Army. 1 Marks, Chris, Nesbitt, Peter. TRAC FY14 Research Requirements Elicitation . Technical Report TRAC-M-TM-13-059. 700 Dyer... Requirements Elicitation Interviews Interview Guide: 1. Describe a research requirement in the areas of topics, techniques, and methodologies. 2

Compliant glass–polymer hybrid single ion-conducting electrolytes for lithium batteries

PubMed Central

Villaluenga, Irune; Wujcik, Kevin H.; Tong, Wei; Devaux, Didier; Wong, Dominica H. C.; DeSimone, Joseph M.; Balsara, Nitash P.

2016-01-01

Despite high ionic conductivities, current inorganic solid electrolytes cannot be used in lithium batteries because of a lack of compliance and adhesion to active particles in battery electrodes as they are discharged and charged. We have successfully developed a compliant, nonflammable, hybrid single ion-conducting electrolyte comprising inorganic sulfide glass particles covalently bonded to a perfluoropolyether polymer. The hybrid with 23 wt% perfluoropolyether exhibits low shear modulus relative to neat glass electrolytes, ionic conductivity of 10−4 S/cm at room temperature, a cation transference number close to unity, and an electrochemical stability window up to 5 V relative to Li+/Li. X-ray absorption spectroscopy indicates that the hybrid electrolyte limits lithium polysulfide dissolution and is, thus, ideally suited for Li-S cells. Our work opens a previously unidentified route for developing compliant solid electrolytes that will address the challenges of lithium batteries. PMID:26699512

Compliant glass–polymer hybrid single ion-conducting electrolytes for lithium batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Villaluenga, Irune; Wujcik, Kevin H.; Tong, Wei

2015-12-22

Despite high ionic conductivities, current inorganic solid electrolytes cannot be used in lithium batteries because of a lack of compliance and adhesion to active particles in battery electrodes as they are discharged and charged. Here, we have successfully developed a compliant, nonflammable, hybrid single ion-conducting electrolyte comprising inorganic sulfide glass particles covalently bonded to a perfluoropolyether polymer. The hybrid with 23 wt% perfluoropolyether exhibits low shear modulus relative to neat glass electrolytes, ionic conductivity of 10 -4 S/cm at room temperature, a cation transference number close to unity, and an electrochemical stability window up to 5 V relative to Limore » +/Li. X-ray absorption spectroscopy indicates that the hybrid electrolyte limits lithium polysulfide dissolution and is, thus, ideally suited for Li-S cells. Our work opens a previously unidentified route for developing compliant solid electrolytes that will address the challenges of lithium batteries.« less

Nursing staff work patterns in a residential aged care home: a time-motion study.

PubMed

Qian, Siyu; Yu, Ping; Hailey, David

2016-11-01

Objective Residential aged care services are challenged by an increasing number of residents and a shortage of nursing staff. Developing strategies to overcome this challenge requires an understanding of nursing staff work patterns. The aim of the present study was to investigate the work processes followed by nursing staff and how nursing time is allocated in a residential aged care home. Methods An observational time-motion study was conducted at two aged care units for 12 morning shifts. Seven nurses were observed, one per shift. Results In all, there were 91h of observation. The results showed that there was a common work process followed by all nurse participants. Medication administration, documentation and verbal communication were the most time-consuming activities and were conducted most frequently. No significant difference between the two units was found in any category of activities. The average duration of most activities was less than 1min. There was no difference in time utilisation between the endorsed enrolled nurses and the personal carers in providing nursing care. Conclusion Medication administration, documentation and verbal communication were the major tasks in morning shifts in a residential aged care home. Future research can investigate how verbal communication supports nursing care. What is known about the topic? The aging population will substantially increase the demand for residential aged care services. There is a lack of research on nurses' work patterns in residential aged care homes. What does this paper add? The present study provides a comprehensive understanding of nurses' work patterns in a residential aged care home. There is a common work process followed by nurses in providing nursing care. Medication administration, verbal communication and documentation are the most time-consuming activities and they are frequently conducted in the same period of time. Wound care, physical review and documentation on desktop computers are arranged flexibly by the nurses. What are the implications for practitioners? When developing a task reallocation strategy to improve work efficiency, effort can be put into tasks that can be arranged more flexibly.

A pilot study to rate determinants of exposure from videotaped work activities of farmers' use of pesticides.

PubMed

Prince, J R; Stewart, P A; Nam, J M; Blair, A

2001-10-01

Industrial hygienists often observe workers to determine who should be measured based on a predicted exposure level. Such evaluations are usually based on real-time observation, yet surprisingly little research has been conducted on what determinants of exposure industrial hygienists use to rank workers and whether the ranking is accurate. Accuracy of the ranking may also be affected by the observation process, which is limited when conditions in the workers' immediate environment are rapidly changing. An alternative to real-time observation is videotaping workers and evaluating the tapes at a later date. A pilot study was conducted using previously collected data to determine if workers could be ranked by exposure level utilizing a scoring system to rate videotaped work practices. Six farmers had been videotaped and their dermal exposures measured as they applied insecticide to hogs. In this study, scores were developed to rate the farmers' working conditions by exposure level. Two types of determinants were used to describe exposure: touching and work practices. Touching included the number of times parts of the body had contact with surfaces possibly contaminated with insecticide. Work practices included the types of clothing and protective equipment worn as well as specific practices used by the farmer (e.g., application method). Two raters conducted independent assessments of the videotape using the same criteria. One rater reviewed the tape twice. Agreement between the raters for the "touching" score was weak (intra-class coefficient (ICC) = 0.28), but there was excellent agreement between the two raters (ICC = 0.92) for overall quality of work practices. As expected, a greater number of touches was moderately correlated with an increase in total exposure (rs = 0.60) and there was a weak inverse relationship between protective work practices and the exposure under the clothing (rs = -0.26). All other relationships with exposure level were contrary to what was expected. Since videotapes provide the industrial hygienist with a record of work events and can capture details that might otherwise be missed or not considered they may play a useful role in exposure assessment, especially if carefully developed procedures are followed to overcome the limitations found by this pilot study.

Synthesis of an air-working trilayer artificial muscle using a conductive cassava starch biofilm (manihot esculenta, cranz) and polypyrrole (PPy)

NASA Astrophysics Data System (ADS)

Núñez D, Y. E.; Arrieta A, Á. A.; Segura B, J. A.; Bertel H, S. D.

2016-02-01

In this study, a methodology for obtaining a conductive cassava starch biofilm doped with lithium perchlorate (LiClO4) is shown, as well as the electrochemical technique for the synthesis of polypyrrole films, which are used for developing the trilayer artificial muscle PPy/Biopolymer/PPy designed to operate in air. Furthermore, results from the trilayer movement using chronoamperometric techniques are shown.

Hypersonic Experimental and Computational Capability, Improvement and Validation. Volume 2

NASA Technical Reports Server (NTRS)

Muylaert, Jean (Editor); Kumar, Ajay (Editor); Dujarric, Christian (Editor)

1998-01-01

The results of the phase 2 effort conducted under AGARD Working Group 18 on Hypersonic Experimental and Computational Capability, Improvement and Validation are presented in this report. The first volume, published in May 1996, mainly focused on the design methodology, plans and some initial results of experiments that had been conducted to serve as validation benchmarks. The current volume presents the detailed experimental and computational data base developed during this effort.

Factors influencing new graduate nurse burnout development, job satisfaction and patient care quality: a time-lagged study.

PubMed

Boamah, Sheila A; Read, Emily A; Spence Laschinger, Heather K

2017-05-01

To test a hypothesized model linking new graduate nurses' perceptions of their manager's authentic leadership behaviours to structural empowerment, short-staffing and work-life interference and subsequent burnout, job satisfaction and patient care quality. Authentic leadership and structural empowerment have been shown to reduce early career burnout among nurses. Short-staffing and work-life interference are also linked to burnout and may help explain the impact of positive, empowering leadership on burnout, which in turn influences job satisfaction and patient care quality. A time-lagged study of Canadian new graduate nurses was conducted. At Time 1, surveys were sent to 3,743 nurses (November 2012-March 2013) and 1,020 were returned (27·3% response rate). At Time 2 (May-July 2014), 406 nurses who responded at Time 1 completed surveys (39·8% response rate). Descriptive analysis was conducted in SPSS. Structural equation modelling in Mplus was used to test the hypothesized model. The hypothesized model was supported. Authentic leadership had a significant positive effect on structural empowerment, which in turn decreased both short-staffing and work-life interference. Short-staffing and work-life imbalance subsequently resulted in nurse burnout, lower job satisfaction and lower patient care quality 1 year later. The findings suggest that short-staffing and work-life interference are important factors influencing new graduate nurse burnout. Developing nurse managers' authentic leadership behaviours and working with them to create and sustain empowering work environments may help reduce burnout, increase nurse job satisfaction and improve patient care quality. © 2016 John Wiley & Sons Ltd.

Training Manpower Development Work Supervisors in the Use of Behavior Modification Techniques to Teach Job-Required Skills. Special Report.

ERIC Educational Resources Information Center

Neiswender, Lenore

The paper describes a current research project now being conducted by the Experimental Manpower Laboratory at Mobilization for Youth (MFY-EML) in New York City. The overall objective of the MFY-EML is to develop and test new methods of teaching vocational skills to hard-to-employ youth. The MFY-EML is involved in developing a program to teach…

Science and Engineering Library and Information Service Development in Support of Research and Development in Indonesia; Report to the Chairman of the Indonesian Institute of Sciences (LIPI).

ERIC Educational Resources Information Center

Shank, Russell

Access to scientific and technical information is essential to the conduct of high quality research and development work. Indonesia's scientists and engineers in Government research institutes are generally not being well-served by their own libraries. The most serious deficiencies are: (1) inadequately trained library staffs, (2) lack of…

Entry, Descent, and Landing Aerothermodynamics: NASA Langley Experimental Capabilities and Contributions

NASA Technical Reports Server (NTRS)

Hollis, Brian R.; Berger, Karen T.; Berry, Scott A.; Bruckmann, Gregory J.; Buck, Gregory M.; DiFulvio, Michael; Horvath, Thomas J.; Liechty, Derek S.; Merski, N. Ronald; Murphy, Kelly J.;

Morphological and functional effects of graphene on the synthesis of uranium carbide for isotopes production targets.

PubMed

Biasetto, L; Corradetti, S; Carturan, S; Eloirdi, R; Amador-Celdran, P; Staicu, D; Blanco, O Dieste; Andrighetto, A

2018-05-29

The development of tailored targets for the production of radioactive isotopes represents an active field in nuclear research. Radioactive beams find applications in nuclear medicine, in astrophysics, matter physics and materials science. In this work, we study the use of graphene both as carbon source for UO 2 carbothermal reduction to produce UC x targets, and also as functional properties booster. At fixed composition, the UC x target grain size, porosity and thermal conductivity represent the three main points that affect the target production efficiency. UC x was synthesized using both graphite and graphene as the source of carbon and the target properties in terms of composition, grain size, porosity, thermal diffusivity and thermal conductivity were studied. The main output of this work is related to the remarkable enhancement achieved in thermal conductivity, which can profitably improve thermal dissipation during operational stages of UC x targets.

Ergonomics and nursing in hospital environments.

PubMed

Rogers, Bonnie; Buckheit, Kathleen; Ostendorf, Judith

2013-10-01

This study describes workplace conditions, the environment, and activities that may contribute to musculoskeletal injuries among nurses, as well as identifies solutions to decrease these risks and improve work-related conditions. The study used a mixed-methods design. Participants included nurses and stakeholders from five hospitals. Several focus groups were held with nurses, walk-throughs of clinical units were conducted, and stakeholder interviews with key occupational health and safety personnel were conducted in each of the five hospitals, as well as with representatives from the American Nurses Association, Veterans Health Administration hospital, and National Institute for Occupational Safety and Health. Several key contributing factors, including the physical environment (e.g., layout and organization of work stations), work organization and culture (e.g., heavy workload, inadequate staffing, lack of education), and work activities (e.g., manual lifting of patients, lack of assistive devices), were identified. Recommendations included the need for a multifaceted and comprehensive approach to developing a sound ergonomics program. Copyright 2013, SLACK Incorporated.

UV-CURED FINISHING WORKS FOR LANE

EPA Science Inventory

The Midwest Research Institute, under a cooperative agreement with the U.S. EPA, conducted a study to identify wood furniture manufacturing facilities that had converted to low-VOC/HAP wood furniture coatings and to develop case studies for those facilities. This article addresse...

DETERMINATION OF PYRETHROID PESTICIDES IN COMPOSITE DIETARY SAMPLES

EPA Science Inventory

The U.S. Environmental Protection Agency's National Exposure Research Laboratory (NERL) conducts aggregate exposure studies for determining an individual's exposure to a broad range of target analytes in composite dietary samples. The objective of this work is to develop an anal...

An Olive Branch for Boards.

ERIC Educational Resources Information Center

Harrington-Lueker, Donna

1993-01-01

Peacekeeping strategies for school-board meetings include developing a code of conduct that spells out guidelines for behavior and then enforcing it; bringing in a neutral observer to help board members work through what is really worrying them; and concentrating on policy. (MLF)

Identity formation and motivation of new faculty developers: A replication study in a resource constrained university.

PubMed

O'Sullivan, Patricia S; Mkony, Charles; Beard, Jessica; Irby, David M

2016-09-01

Previous studies on the identity development and motivation of faculty developers have occurred with seasoned developers in a research-rich environment. We sought to determine if the findings of those studies could be replicated with novice faculty developers in a resource-constrained environment. We interviewed 15 novice faculty developers from Muhimbili University of Health and Allied Sciences (MUHAS) who, at the time, had led faculty development activities for no more than two years. We conducted a qualitative analysis sensitized by the previous findings. Results were very similar to the previous work. The developers described compartmentalized, hierarchical, and merged identities. The impact was on their teaching as well as on others at MUHAS and on the institution itself. The motivations related to mastery, purpose, duty, satisfaction, and relatedness. This replication led us to conclude that identity development as a faculty developer occurs even in novice developers who do faculty development as only part of their work and despite constrained resources and a different culture. These developers find the work richly rewarding and their motivations benefit the institution. This body of research highlights how faculty development provides benefits to the institution as well as engaging career opportunities.

Time motion study using mixed methods to assess service delivery by frontline health workers from South India: methods.

PubMed

Singh, Samiksha; Upadhyaya, Sanjeev; Deshmukh, Pradeep; Dongre, Amol; Dwivedi, Neha; Dey, Deepak; Kumar, Vijay

2018-04-02

In India, amidst the increasing number of health programmes, there are concerns about the performance of frontline health workers (FLHW). We assessed the time utilisation and factors affecting the work of frontline health workers from South India. This is a mixed methods study using time and motion (TAM) direct observations and qualitative enquiry among frontline/community health workers. These included 43 female and 6 male multipurpose health workers (namely, auxiliary nurse midwives (ANMs) and male-MPHWs), 12 nutrition and health workers (Anganwadi workers, AWWs) and 53 incentive-based community health workers (accredited social health activists, ASHAs). We conducted the study in two phases. In the formative phase, we conducted an in-depth inductive investigation to develop observation checklists and qualitative tools. The main study involved deductive approach for TAM observations. This enabled us to observe a larger sample to capture variations across non-tribal and tribal regions and different health cadres. For the main study, we developed GPRS-enabled android-based application to precisely record time, multi-tasking and field movement. We conducted non-participatory direct observations (home to home) for consecutively 6 days for each participant. We conducted in-depth interviews with all the participants and 33 of their supervisors and relevant officials. We conducted six focus group discussions (FGDs) with ASHAs and one FGD with ANMs to validate preliminary findings. We established a mechanism for quality assurance of data collection and analysis. We analysed the data separately for each cadre and stratified for non-tribal and tribal regions. On any working day, the ANMs spent median 7:04 h, male-MPHWs spent median 5:44 h and AWWs spent median 6:50 h on the job. The time spent on the job was less among the FLHWs from tribal areas as compared to those from non-tribal areas. ANMs and AWWs prioritised maternal and child health, while male-MPHWs were involved in seasonal diseases and school health. ASHAs visited homes to provide maternal health, basic curative care, and follow-up of tuberculosis patients. The results describe issues related with work planning, time management and several systemic, community-based and personnel factors affecting work of FLHWs. TAM study with mixed methods can help researchers as well as managers to periodically review work patterns, devise appropriate job responsibilities and improve the efficiency of health workers.

Standards for education and training for interagency working in child protection in the UK: implications for nurses, midwives and health visitors.

PubMed

Long, Tony; Davis, Cathy; Johnson, Martin; Murphy, Michael; Race, David; Shardlow, Steven M

2006-01-01

This article presents a discussion of key issues for the education of nurses, midwives and health visitors following the completion of a Department of Health funded project, managed by the General Social Care Council and conducted jointly by two research centres; Salford Centre for Social Work Research and Salford Centre for Nursing, Midwifery and Collaborative Research. The work was initiated in response to Lord Laming's report on the circumstances leading to the death of Victoria Climbié. The project was conducted in relation to specified professions and occupational groups: doctors; health visitors; midwives; nurses; police; teachers, and social workers. It was undertaken in two stages. The first stage mapped existing material about standards in relation to education and training for interagency working. The second stage engaged in an extensive consultation exercise through which a model and a set of proposed standards for interagency education and training for interagency work were developed. The former is detailed fully in this report, while nine examples of standards are presented. The project final report was presented seven months after commencement.

Learning, Attention/Hyperactivity, and Conduct Problems as Sequelae of Excessive Daytime Sleepiness in a General Population Study of Young Children

PubMed Central

Calhoun, Susan L.; Fernandez-Mendoza, Julio; Vgontzas, Alexandros N.; Mayes, Susan D.; Tsaoussoglou, Marina; Rodriguez-Muñoz, Alfredo; Bixler, Edward O.

2012-01-01

Study Objectives: Although excessive daytime sleepiness (EDS) is a common problem in children, with estimates of 15%; few studies have investigated the sequelae of EDS in young children. We investigated the association of EDS with objective neurocognitive measures and parent reported learning, attention/hyperactivity, and conduct problems in a large general population sample of children. Design: Cross-sectional. Setting: Population based. Participants: 508 children from The Penn State Child Cohort. Interventions: N/A. Measurements and Results: Children underwent a 9-h polysomnogram, comprehensive neurocognitive testing, and parent rating scales. Children were divided into 2 groups: those with and without parent-reported EDS. Structural equation modeling was used to examine whether processing speed and working memory performance would mediate the relationship between EDS and learning, attention/hyperactivity, and conduct problems. Logistic regression models suggest that parent-reported learning, attention/hyperactivity, and conduct problems, as well as objective measurement of processing speed and working memory are significant sequelae of EDS, even when controlling for AHI and objective markers of sleep. Path analysis demonstrates that processing speed and working memory performance are strong mediators of the association of EDS with learning and attention/hyperactivity problems, while to a slightly lesser degree are mediators from EDS to conduct problems. Conclusions: This study suggests that in a large general population sample of young children, parent-reported EDS is associated with neurobehavioral (learning, attention/hyperactivity, conduct) problems and poorer performance in processing speed and working memory. Impairment due to EDS in daytime cognitive and behavioral functioning can have a significant impact on children's development. Citation: Calhoun SL; Fernandez-Mendoza J; Vgontzas AN; Mayes SD; Tsaoussoglou M; Rodriguez-Muñoz A; Bixler EO. Learning, attention/hyperactivity, and conduct problems as sequelae of excessive daytime sleepiness in a general population study of young children. SLEEP 2012;35(5):627-632. PMID:22547888

The workings of a multicultural research team.

PubMed

Friedemann, Marie-Luise; Pagan-Coss, Harald; Mayorga, Carlos

2008-07-01

Transcultural nurse researchers are exposed to the challenges of developing and maintaining a multiethnic team. With the example of a multicultural research study of family caregivers conducted in the Miami-Dade area, the authors guide the readers through steps of developing a culturally competent and effective team. Pointing out challenges and successes, the authors illustrate team processes and successful strategies relative to recruitment of qualified members, training and team maintenance, and evaluation of team effectiveness. With relevant concepts from the literature applied to practical examples, the authors demonstrate how cultural team competence grows in a supportive work environment.

Working Group 5: Measurements technology and active experiments

NASA Technical Reports Server (NTRS)

Whipple, E.; Barfield, J. N.; Faelthammar, C.-G.; Feynman, J.; Quinn, J. N.; Roberts, W.; Stone, N.; Taylor, W. L.

1986-01-01

Technology issues identified by working groups 5 are listed. (1) New instruments are needed to upgrade the ability to measure plasma properties in space. (2) Facilities should be developed for conducting a broad range of plasma experiments in space. (3) The ability to predict plasma weather within magnetospheres should be improved and a capability to modify plasma weather developed. (4) Methods of control of plasma spacecraft and spacecraft plasma interference should be upgraded. (5) The space station laboratory facilities should be designed with attention to problems of flexibility to allow for future growth. These issues are discussed.

The Workings of a Multicultural Research Team

PubMed Central

Friedemann, Marie-Luise; Pagan-Coss, Harald; Mayorga, Carlos

2013-01-01

Purpose Transcultural nurse researchers are exposed to the challenges of developing and maintaining a multiethnic team. With the example of a multicultural research study of family caregivers conducted in the Miami-Dade area, the authors guide the readers through steps of developing a culturally competent and effective team. Design Pointing out challenges and successes, the authors illustrate team processes and successful strategies relative to recruitment of qualified members, training and team maintenance, and evaluation of team effectiveness. Method With relevant concepts from the literature applied to practical examples, the authors demonstrate how cultural team competence grows in a supportive work environment. PMID:18390824

Relationship of working mothers' parenting style and consistency to early childhood development: a longitudinal investigation.

PubMed

Tong, Lian; Shinohara, Ryoji; Sugisawa, Yuka; Tanaka, Emiko; Maruyama, Akiko; Sawada, Yuko; Ishi, Yukiko; Anme, Tokie

2009-10-01

This paper is a report of a longitudinal study of the relationship of working mothers' parenting style to their children's social competence and vocabulary/ motor/intellectual development. With an increasing number of women choosing to remain in the workforce after starting a family, there has been a concomitant increase in use of non-parental childcare facilities to help look after the child while the mother is at work. This increase in non-parental care has led to a dramatic change in the traditional child-rearing environment. Long-term investigations were conducted over a period of 2 years in 41 Japanese government-licensed childcare facilities. Child development was evaluated by childcare professionals and parenting style was assessed by questionnaire. A total of 504 children and their mothers participated in the study. Data collection was carried out in 2004 and 2006. We found that the changes in parenting style were statistically significantly related to children's development after 2 years. For instance, changes in the parent-child playing routine contributed to the child's social competence (odds ratio = 11.088). Variation in working mothers' disciplinary practices was also associated with children's vocabulary development after 2 years (odds ratio = 2246). Working mothers should increase interactions with their children in their free time to reduce the risk of developmental delay. Daily childcare support provided by family members or social organizations for long-term working mothers is helpful in mediating the negative relationship of mothers' working with children's development.

Breast Cancer Survivors Report Similar Concerns Related to Return to Work in Developed and Developing Nations.

PubMed

Luo, Shi-Xiang; Liu, Jun-E; Cheng, Andy S K; Xiao, Shu-Qin; Su, Ya-Li; Feuerstein, Michael

2018-02-14

Aim To determine whether breast cancer survivors (BCS) at work following the diagnosis and/or treatment of breast cancer, in a rapidly developing country such as China experience similar to return to work challenges as reported in nations with established return to work (RTW) policy and procedures for employees with cancer. Methods Semi-structured interviews were conducted with 16 BCS who returned to work following diagnosis and/or primary cancer treatment. An Interpretative Phenomenological Analysis was used to investigate responses. Results Three recurring themes emerged: (1) challenges at work related to residual effects of diagnosis and/or primary treatment; (2) positive and negative responses from employers and/or supervisors; and (3) positive and negative responses from co-workers/colleagues. Although several participants experienced a high level of workplace support, there was a subgroup that did report challenges related to symptom burden, cognitive limitations, and both positive and negative responses by employers and co-workers were reported. Conclusions Findings indicate similar challenges in BCS who RTW during and/or following cancer treatment in both rapidly developing and developed nations. Results suggest that regardless of the existence of workplace policies and practices related to RTW for workers with a history of cancer, a subgroup of BCS experience similar challenges when returning to work. These findings highlight the international nature of RTW challenges and suggest the need for more global efforts to develop and evaluate workplace interventions to assist with these similarities.

The development and initial validation of the Decent Work Scale.

PubMed

Duffy, Ryan D; Allan, Blake A; England, Jessica W; Blustein, David L; Autin, Kelsey L; Douglass, Richard P; Ferreira, Joaquim; Santos, Eduardo J R

2017-03-01

Decent work is positioned as the centerpiece of the recently developed Psychology of Working Theory (PWT; Duffy, Blustein, Diemer, & Autin, 2016). However, to date, no instrument exists which assesses all 5 components of decent work from a psychological perspective. In the current study, we developed the Decent Work Scale (DWS) and demonstrated several aspects of validity with 2 samples of working adults. In Study 1 (N = 275), a large pool of items were developed and exploratory factor analysis was conducted resulting in a final 15-item scale with 5 factors/subscales corresponding to the 5 components of decent work: (a) physically and interpersonally safe working conditions, (b) access to health care, (c) adequate compensation, (d) hours that allow for free time and rest, and (e) organizational values that complement family and social values. In Study 2 (N = 589), confirmatory factor analysis demonstrated that a 5-factor, bifactor model offered the strongest and most parsimonious fit to the data. Configural, metric, and scalar invariance models were tested demonstrating that the structure of the instrument did not differ across gender, income, social class, and majority/minority racial/ethnic groups. Finally, the overall scale score and 5 subscale scores correlated in the expected directions with similar constructs supporting convergent and discriminant evidence of validity, and subscale scores evidenced predictive validity in the prediction of job satisfaction, work meaning, and withdrawal intentions. The development of this scale provides a useful tool for researchers and practitioners seeking to assess the attainment of decent work among employed adults. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Sri Lanka Wind Farm Analysis and Site Selection Assistance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, M.; Vilhauer, R.

2003-08-01

The United States Department of Energy (DOE), through the National Renewable Energy Laboratory (NREL), has been working in partnership with the U.S. Agency for International Development (USAID) in an on-going process to quantify the Sri Lanka wind energy potential and foster wind energy development. Work to date includes completion of the NREL wind atlas for Sri Lanka. In addition, the Ceylon Electricity Board (CEB) has conducted a wind resource assessment of several areas of the country and has successfully completed and is currently operating a 3-MW pilot wind project. A review of the work completed to date indicates that additionalmore » activities are necessary to provide Sri Lanka with the tools necessary to identify the best wind energy development opportunities. In addition, there is a need to identify key policy, regulatory, business and infrastructure issues that affect wind energy development and to recommend steps to encourage and support wind power development and investment.« less

Thermal conductivity of disperse insulation materials and their mixtures

NASA Astrophysics Data System (ADS)

Geža, V.; Jakovičs, A.; Gendelis, S.; Usiļonoks, I.; Timofejevs, J.

2017-10-01

Development of new, more efficient thermal insulation materials is a key to reduction of heat losses and contribution to greenhouse gas emissions. Two innovative materials developed at Thermeko LLC are Izoprok and Izopearl. This research is devoted to experimental study of thermal insulation properties of both materials as well as their mixture. Results show that mixture of 40% Izoprok and 60% of Izopearl has lower thermal conductivity than pure materials. In this work, material thermal conductivity dependence temperature is also measured. Novel modelling approach is used to model spatial distribution of disperse insulation material. Computational fluid dynamics approach is also used to estimate role of different heat transfer phenomena in such porous mixture. Modelling results show that thermal convection plays small role in heat transfer despite large fraction of air within material pores.

Measuring the mechanical efficiency of a working cardiac muscle sample at body temperature using a flow-through calorimeter.

PubMed

Taberner, Andrew J; Johnston, Callum M; Pham, Toan; June-Chiew Han; Ruddy, Bryan P; Loiselle, Denis S; Nielsen, Poul M F

2015-08-01

We have developed a new `work-loop calorimeter' that is capable of measuring, simultaneously, the work-done and heat production of isolated cardiac muscle samples at body temperature. Through the innovative use of thermoelectric modules as temperature sensors, the development of a low-noise fluid-flow system, and implementation of precise temperature control, the heat resolution of this device is 10 nW, an improvement by a factor of ten over previous designs. These advances have allowed us to conduct the first flow-through measurements of work output and heat dissipation from cardiac tissue at body temperature. The mechanical efficiency is found to vary with peak stress, and reaches a peak value of approximately 15 %, a figure similar to that observed in cardiac muscle at lower temperatures.

Education, skills, and working environments of workers in India's rural industry.

PubMed

Chadha, G K; Sahu, P P; Rout, B

2001-01-01

Based on a mix of official data and results of a survey conducted in May-June 2000 as part of an ongoing Swedish-Indian-Chinese collaborative study, this paper describes the working conditions of workers engaged in rural industry in India. First, it reports the education and skills of such workers. Educational attainment is presented in terms of both general and technical education. The role played by public institutions in the development of skills is examined. A view of the environment in which these workers work, on the one hand, and the physical/economic conditions of work, on the other, is then developed. Locational and gender disparities are illustrated by rural-urban and male-female comparisons to the extent that the available data permit. Child labor is briefly discussed. The findings are disturbing. The authors offer suggestions for improvement.

Work organization research at the National Institute for Occupational Safety and Health.

PubMed

Rosenstock, L

1997-01-01

For 25 years, the National Institute for Occupational Safety and Health (NIOSH) has conducted and sponsored laboratory, field, and epidemiological studies that have helped define the role of work organization factors in occupational safety and health. Research has focused on the health effects of specific job conditions, occupational stressors in specific occupations, occupational difference in the incidence of stressors and stress-related disorders, and intervention strategies. NIOSH and the American Psychological Association have formalized the concept of occupational health psychology and developed a postdoctoral training program. The National Occupational Research Agenda recognizes organization of work as one of 21 national occupational safety and health research priority areas. Future research should focus on industries, occupations, and populations at special risk; the impact of work organization on overall health; the identification of healthy organization characteristics; and the development of intervention strategies.

Depot Maintenance: Air Force is Assessing Engine Maintenance Options for Work Currently Performed at Kelly Aviation Center

DTIC Science & Technology

2011-02-11

on TF39 engines, which are typically used for C-5 Galaxy aircraft; T56 engines, which are typically used for C-130 aircraft; and fuel accessories on...conducting separate cost-benefit analyses for the TF39 and T56 engine maintenance work. Under Air Force guidance for depot-level source-of-repair selection...Force has not developed specific risk mitigation plans for the TF39 or T56 engines because it is still assessing how the work will be performed

Stability and ionic mobility in argyrodite-related lithium-ion solid electrolytes.

PubMed

Chen, Hao Min; Maohua, Chen; Adams, Stefan

2015-07-07

In the search for fast lithium-ion conducting solids for the development of safe rechargeable all-solid-state batteries with high energy density, thiophosphates and related compounds have been demonstrated to be particularly promising both because of their record ionic conductivities and their typically low charge transfer resistances. In this work we explore a wide range of known and predicted thiophosphates with a particular focus on the cubic argyrodite phase with a robust three-dimensional network of ion migration pathways. Structural and hydrolysis stability are calculated employing density functional method in combination with a generally applicable method of predicting the relevant critical reaction. The activation energy for ion migration in these argyrodites is then calculated using the empirical bond valence pathway method developed in our group, while bandgaps of selected argyrodites are calculated as a basis for assessing the electrochemical window. Findings for the lithium compounds are also compared to those of previously known copper argyrodites and hypothetical sodium argyrodites. Therefrom, guidelines for experimental work are derived to yield phases with the optimum balance between chemical stability and ionic conductivity in the search for practical lithium and sodium solid electrolyte materials.

Advanced Gas Turbine (AGT) powertrain system development for automotive applications report

NASA Technical Reports Server (NTRS)

1984-01-01

This report describes progress and work performed during January through June 1984 to develop technology for an Advanced Gas Turbine (AGT) engine for automotive applications. Work performed during the first eight periods initiated design and analysis, ceramic development, component testing, and test bed evaluation. Project effort conducted under this contract is part of the DOE Gas Turbine Highway Vehicle System Program. This program is oriented at providing the United States automotive industry the high-risk long-range techology necessary to produce gas turbine engines for automobiles with reduced fuel consumption and reduced environmental impact. Technology resulting from this program is intended to reach the marketplace by the early 1990s.

Return on Investment: A Cost-Effectiveness Measure for the Texas' Workforce System.

ERIC Educational Resources Information Center

Norris, Davy N.; King, Christopher T.

Texas is developing a return-on-investment (ROI) measure to assess the cost-effectiveness of work force programs. Emphasis is on issues related to conducting cross-program ROI analysis at the level of the Local Workforce Development Board (LWDB) in career or one-stop centers. To make the most appropriate and effective use of ROI, the following…

Overview of Human-Centric Space Situational Awareness Science and Technology

DTIC Science & Technology

2012-09-01

AGI), the developers of Satellite Tool Kit ( STK ), has provided demonstrations of innovative SSA visualization concepts that take advantage of the...needs inherent with SSA. RH has conducted CTAs and developed work-centered human-computer interfaces, visualizations , and collaboration technologies...all end users. RH’s Battlespace Visualization Branch researches methods to exploit the visual channel primarily to improve decision making and

Pre-Service Teachers' Greater Power to Act in the Classroom: Analysis of the Circumstances for Professional Development

ERIC Educational Resources Information Center

Moussay, Sylvie; Flavier, Eric; Zimmermann, Philipe; Meard, Jacques

2011-01-01

This case study analysed the circumstances during a one-year work placement in which a pre-service teacher showed professional development, with a focus on the impact of her interactions with various interlocutors. The study was conducted within the framework of the cultural historical activity theory (CHAT) and of activity theory with its methods…

Design & Performance of Wearable Ultra Wide Band Textile Antenna for Medical Applications

NASA Astrophysics Data System (ADS)

Singh, Nikhil; Singh, Ashutosh Kumar; Singh, Vinod Kumar

2015-02-01

The concept of wearable products such as textile antenna are being developed which are capable of monitoring, alerting and demanding attention whenever hospital emergency is needed, hence minimizing labour and resource. In the proposed work by using textile material as a substrate the ultra wideband antenna is designed especially for medical applications.Simulated and measured results here shows that the proposed antenna design meets the requirements of wide working bandwidth and provides 13.08 GHz bandwidth with very small size, washable (if using conductive thread for conductive parts) and flexible materials. Results in terms of bandwidth, radiation pattern, return loss as well as gain and efficiency are presented to validate the usefulness of the current proposed design. The work done here has many implications for future research and it could help patients with such flexible and comfortable medical monitoring techniques.

Chemical reactivity testing for the National Spent Nuclear Fuel Program. Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koester, L.W.

This quality assurance project plan (QAPjP) summarizes requirements used by Lockheed Martin Energy Systems, Incorporated (LMES) Development Division at Y-12 for conducting chemical reactivity testing of Department of Energy (DOE) owned spent nuclear fuel, sponsored by the National Spent Nuclear Fuel Program (NSNFP). The requirements are based on the NSNFP Statement of work PRO-007 (Statement of Work for Laboratory Determination of Uranium Hydride Oxidation Reaction Kinetics.) This QAPjP will utilize the quality assurance program at Y-12, Y60-101PD, Quality Program Description, and existing implementing procedures for the most part in meeting the NSNFP Statement of Work PRO-007 requirements, exceptions will bemore » noted. The project consists of conducting three separate series of related experiments, ''Passivation of Uranium Hydride Powder With Oxygen and Water'', '''Passivation of Uranium Hydride Powder with Surface Characterization'', and ''Electrochemical Measure of Uranium Hydride Corrosion Rate''.« less

KENNEDY SPACE CENTER, FLA. - Researchers conduct underwater acoustic research in the Launch Complex 39 turn basin. Several government agencies, including NASA, NOAA, the Navy, the Coast Guard, and the Florida Fish and Wildlife Commission are involved in the testing. The research involves demonstrations of passive and active sensor technologies, with applications in fields ranging from marine biological research to homeland security. The work is also serving as a pilot project to assess the cooperation between the agencies involved. Equipment under development includes a passive acoustic monitor developed by NASA’s Jet Propulsion Laboratory, and mobile robotic sensors from the Navy’s Mobile Diving and Salvage Unit.

NASA Image and Video Library

2003-08-18

KENNEDY SPACE CENTER, FLA. - Researchers conduct underwater acoustic research in the Launch Complex 39 turn basin. Several government agencies, including NASA, NOAA, the Navy, the Coast Guard, and the Florida Fish and Wildlife Commission are involved in the testing. The research involves demonstrations of passive and active sensor technologies, with applications in fields ranging from marine biological research to homeland security. The work is also serving as a pilot project to assess the cooperation between the agencies involved. Equipment under development includes a passive acoustic monitor developed by NASA’s Jet Propulsion Laboratory, and mobile robotic sensors from the Navy’s Mobile Diving and Salvage Unit.

Thermoelastic damping in thin microrings with two-dimensional heat conduction

NASA Astrophysics Data System (ADS)

Fang, Yuming; Li, Pu

2015-05-01

Accurate determination of thermoelastic damping (TED) is very challenging in the design of micro-resonators. Microrings are widely used in many micro-resonators. In the past, to model the TED effect on the microrings, some analytical models have been developed. However, in the previous works, the heat conduction within the microring is modeled by using the one-dimensional approach. The governing equation for heat conduction is solved only for the one-dimensional heat conduction along the radial thickness of the microring. This paper presents a simple analytical model for TED in microrings. The two-dimensional heat conduction over the thermoelastic temperature gradients along the radial thickness and the circumferential direction are considered in the present model. A two-dimensional heat conduction equation is developed. The solution of the equation is represented by the product of an assumed sine series along the radial thickness and an assumed trigonometric series along the circumferential direction. The analytical results obtained by the present 2-D model show a good agreement with the numerical (FEM) results. The limitations of the previous 1-D model are assessed.

Electronic and transport properties of Li-doped NiO epitaxial thin films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, J. Y.; Li, W. W.; Hoye, R. L. Z.

NiO is a p-type wide bandgap semiconductor of use in various electronic devices ranging from solar cells to transparent transistors. Understanding and improving its optical and transport properties have been of considerable interest. In this work, we have investigated the effect of Li doping on the electronic, optical and transport properties of NiO epitaxial thin films grown by pulsed laser deposition. We show that Li doping significantly increases the p-type conductivity of NiO, but all the films have relatively low room-temperature mobilities (<0.05 cm2 V -1s -1). The conduction mechanism is better described by small-polaron hoping model in the temperaturemore » range of 200 K < T <330 K, and variable range hopping at T <200 K. A combination of x-ray photoemission and O K-edge x-ray absorption spectroscopic investigations reveal that the Fermi level gradually shifts toward the valence band maximum (VBM) and a new hole state develops with Li doping. Both the VBM and hole states are composed of primarily Zhang-Rice bound states, which accounts for the small polaron character (low mobility) of hole conduction. Our work provides guidelines for the search for p-type oxide materials and device optimization.NiO is a p-type wide bandgap semiconductor of use in various electronic devices ranging from solar cells to transparent transistors. This work reports the controlling of conductivity and increase of work functions by Li doping.« less

OARSI Clinical Trials Recommendations: Design, conduct, and reporting of clinical trials for knee osteoarthritis.

PubMed

McAlindon, T E; Driban, J B; Henrotin, Y; Hunter, D J; Jiang, G-L; Skou, S T; Wang, S; Schnitzer, T

2015-05-01

The goal of this document is to update the original OARSI recommendations specifically for the design, conduct, and reporting of clinical trials that target symptom or structure modification among individuals with knee osteoarthritis (OA). To develop recommendations for the design, conduct, and reporting of clinical trials for knee OA we initially drafted recommendations through an iterative process. Members of the working group included representatives from industry and academia. After the working group members reviewed a final draft, they scored the appropriateness for recommendations. After the members voted we calculated the median score among the nine members of the working group who completed the score. The document includes 25 recommendations regarding randomization, blocking and stratification, blinding, enhancing accuracy of patient-reported outcomes (PRO), selecting a study population and index knee, describing interventions, patient-reported and physical performance measures, structural outcome measures, biochemical biomarkers, and reporting recommendations. In summary, the working group identified 25 recommendations that represent the current best practices regarding clinical trials that target symptom or structure modification among individuals with knee OA. These updated recommendations incorporate novel technologies (e.g., magnetic resonance imaging (MRI)) and strategies to address the heterogeneity of knee OA. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Crystal Lattice Controlled SiGe Thermoelectric Materials with High Figure of Merit

NASA Technical Reports Server (NTRS)

Kim, Hyun-Jung; Park, Yeonjoon; King, Glen C.; Lee, Kunik; Choi, Sang H.

2010-01-01

Direct energy conversion between thermal and electrical energy, based on thermoelectric (TE) effect, has the potential to recover waste heat and convert it to provide clean electric power. The energy conversion efficiency is related to the thermoelectric figure of merit ZT expressed as ZT=S(exp 2)(sigma)T/Kappa, T is temperature, S is the Seebeck coefficient, sigma is conductance and Kappa is thermal conductivity. For a lower thermal conductivity Kappa and high power factor (S(exp 2)(sigma)), our current strategy is the development of rhombohedrally strained single crystalline SiGe materials that are highly [111]-oriented twinned. The development of a SiGe "twin lattice structure (TLS)" plays a key role in phonon scattering. The TLS increases the electrical conductivity and decreases thermal conductivity due to phonon scattering at stacking faults generated from the 60 X rotated primary twin structure. To develop high performance materials, the substrate temperature, chamber working pressure, and DC sputtering power are controlled for the aligned growth production of SiGe layer and TLS on a c-plane sapphire. Additionally, a new elevated temperature thermoelectric characterization system, that measures the thermal diffusivity and Seebeck effect nondestructively, was developed. The material properties were characterized at various temperatures and optimized process conditions were experimentally determined. The present paper encompasses the technical discussions toward the development of thermoelectric materials and the measurement techniques.

Narcolepsy (with and without cataplexy) and commercial motor vehicle driver safety.

DOT National Transportation Integrated Search

2009-10-01

The purpose of this evidence report is to address several questions posed by FMCSA regarding the topic of narcolepsy and commercial motor vehicle (CMV) driver safety. In the early scope development work conducted by the Agency and the Medical Review ...

Identification and testing of countermeasures for specific alcohol accident types and problems. Volume 4, Appendices

DOT National Transportation Integrated Search

1984-12-01

This report summarizes work conducted to investigate the feasibility of developing effective countermeasures directed at specific alcohol-related accidents or problems. In Phase I, literature and accident data were reviewed to determine the scope and...

Accreditation of Employee Development.

ERIC Educational Resources Information Center

Geale, John

A British project was conducted to improve understanding of the advantages and disadvantages of certification for work-based training and to analyze factors that influence the demand for accreditation. Three studies investigated what was happening in three employment sectors: tourism (service/commercial), social services (public administration),…

Chemical release and radiation effects experiment advanced planning and coordination

NASA Technical Reports Server (NTRS)

Vaughan, William W.; Alzmann, Melanie

1991-01-01

The efforts conducted to provide assessments and planning support for the Chemical Release and Radiation Effects Satellite (CRRES) Experiments are summarized. Included are activities regarding scientific working group and workshop development including the preparation of descriptive information on the CRRES Project.

Power Networking for Community College Teachers.

ERIC Educational Resources Information Center

Torbert, Brison

1990-01-01

Outlines self-enrichment activities for faculty, administrators, and students that can improve working conditions and promotion opportunities, e.g., getting a personal business card, developing a contacts list, examining the institution, conducting research on classroom and business trends, joining "power organizations," and making a master…

Identification and testing of countermeasures for specific alcohol accident types and problems. Volume 1, Executive summary

DOT National Transportation Integrated Search

1984-12-01

This report summarizes work conducted to investigate the feasibility of developing effective countermeasures directed at specific alcohol-related accidents or problems. In Phase I, literature and accident data were reviewed to determine the scope and...

Chemical release and radiation effects experiment advanced planned

NASA Technical Reports Server (NTRS)

Vaughan, William W.; Alzmann, Melanie

1990-01-01

A summary of the efforts conducted to provide assessments and planning support for the Chemical Release and Radiation Experiment Satellite (CRRES) is reported. Included are activities regarding scientific working group and workshop development including the preparation of descriptive information on the CRRES project.

Measuring first-line nurse manager work: instrument: development and testing.

PubMed

Cadmus, Edna; Wisniewska, Edyta K

2013-12-01

The objective of this study was to develop and test a 1st-line nurse manager (FLNM) work instrument to measure categories of work and frequency of activities. First-line nurse managers have been demonstrated to be key contributors in meeting organizational outcomes and patient and nurse satisfaction. Identifying the work of FLNMs is essential to help in the development of prioritization and sequence. The need for an instrument that can measure and categorize the work of FLNMs is indicated. The author-developed instrument was administered as a pilot study to 173 FLNMs in New Jersey. Descriptive statistics were analyzed, and validity and reliability were measured. Content validity was established through 2 focus groups using 10 FLNMs and conducting a survey of 5 chief nursing officers. Reliability was assessed by 13 of 16 FLNM participants using the test/retest method and quantified using percent agreement within a 10-day period. Those items with 70% agreement or more were identified as reliable and retained on the instrument. The content validity of the instrument is strong; further refinement and testing of the tool are indicated to improve the reliability and generalizability across multiple populations of leaders and settings.

Developmental pathways of multisite musculoskeletal pain: what is the influence of physical and psychosocial working conditions?

PubMed

Neupane, Subas; Leino-Arjas, Päivi; Nygård, Clas-Håkan; Oakman, Jodi; Virtanen, Pekka

2017-07-01

To investigate the developmental pathways of multisite musculoskeletal pain (MSP) and the effect of physical and psychosocial working conditions on the development of MSP trajectories. The study was conducted among food industry workers (N=868) using a longitudinal design. Surveys were conducted every 2 years from 2003 to 2009. The questionnaire covered MSP, physical and psychosocial working conditions (physical strain, environmental factors, repetitive movements, awkward postures; mental strain, team support, leadership, possibility to influence) and work ability. MSP as an outcome was defined as the number of painful areas of the body on a scale of 0-4. Latent class growth modelling and multinomial logistic regression were used to analyse the impact of working conditions on MSP pathways. Five MSP trajectories (no MSP 35.6%, persistent MSP 28.8%, developing MSP 8.8%, increasing MSP 15.3% and decreasing MSP 11.5%) were identified. In a multivariable model, the no MSP pathway was set as the reference group. High physical strain (OR 3.26, 95% CI 2.10 to 5.04), poor environmental factors (3.84, 2.48 to 5.94), high repetitive movements (3.68, 2.31 to 5.88) and high mental strain (3.87, 2.53 to 5.92) at baseline predicted the persistent MSP pathway, allowing for poor work ability (2.81, 1.84 to 4.28) and female gender (1.80, 1.14 to 2.83). High physical strain and female gender predicted the developing MSP pathway. High physical strain, poor environmental factors and high repetitive movements predicted the increasing and decreasing MSP pathways. A substantial proportion of individuals reported having persistent MSP, and one-third reported changing patterns of pain. Adverse physical working conditions and mental strain were strongly associated with having high but stable levels of MSP. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Composite electrolyte with proton conductivity for low-temperature solid oxide fuel cell

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raza, Rizwan, E-mail: razahussaini786@gmail.com; Department of Energy Technology, Royal Institute of Technology, KTH, Stockholm 10044; Ahmed, Akhlaq

In the present work, cost-effective nanocomposite electrolyte (Ba-SDC) oxide is developed for efficient low-temperature solid oxide fuel cells (LTSOFCs). Analysis has shown that dual phase conduction of O{sup −2} (oxygen ions) and H{sup +} (protons) plays a significant role in the development of advanced LTSOFCs. Comparatively high proton ion conductivity (0.19 s/cm) for LTSOFCs was achieved at low temperature (460 °C). In this article, the ionic conduction behaviour of LTSOFCs is explained by carrying out electrochemical impedance spectroscopy measurements. Further, the phase and structure analysis are investigated by X-ray diffraction and scanning electron microscopy techniques. Finally, we achieved an ionic transport numbermore » of the composite electrolyte for LTSOFCs as high as 0.95 and energy and power density of 90% and 550 mW/cm{sup 2}, respectively, after sintering the composite electrolyte at 800 °C for 4 h, which is promising. Our current effort toward the development of an efficient, green, low-temperature solid oxide fuel cell with the incorporation of high proton conductivity composite electrolyte may open frontiers in the fields of energy and fuel cell technology.« less

STS-55 Payload Specialist Schlegel collects fungi sample at SL-D2 Rack 1

NASA Technical Reports Server (NTRS)

1993-01-01

STS-55 German Payload Specialist 2 Hans Schlegel, wearing lightweight headset, collects fungi sample while working at Spacelab Deutsche 2 (SL-D2) science module Rack 1 Work Bench. Schlegel is conducting these procedures in conjunction with the 'Fruiting Body Development of Fungi' experiment. Pieces of the experiment casing freefloat in the workstation.Schlegel represents the German Aerospace Research Establishment (DLR) on the 10-day spacelab mission.

A systematic review of stakeholder engagement in comparative effectiveness and patient-centered outcomes research.

PubMed

Concannon, Thomas W; Fuster, Melissa; Saunders, Tully; Patel, Kamal; Wong, John B; Leslie, Laurel K; Lau, Joseph

2014-12-01

We conducted a review of the peer-reviewed literature since 2003 to catalogue reported methods of stakeholder engagement in comparative effectiveness research and patient-centered outcomes research. We worked with stakeholders before, during and after the review was conducted to: define the primary and key research questions; conduct the literature search; screen titles, abstracts and articles; abstract data from the articles; and analyze the data. The literature search yielded 2,062 abstracts. The review was conducted on 70 articles that reported on stakeholder engagement in individual research projects or programs. Reports of stakeholder engagement are highly variable in content and quality. We found frequent engagement with patients, modestly frequent engagement with clinicians, and infrequent engagement with stakeholders in other key decision-making groups across the healthcare system. Stakeholder engagement was more common in earlier (prioritization) than in later (implementation and dissemination) stages of research. The roles and activities of stakeholders were highly variable across research and program reports. To improve on the quality and content of reporting, we developed a 7-Item Stakeholder Engagement Reporting Questionnaire. We recommend three directions for future research: 1) descriptive research on stakeholder-engagement in research; 2) evaluative research on the impact of stakeholder engagement on the relevance, transparency and adoption of research; and 3) development and validation of tools that can be used to support stakeholder engagement in future work.

Task Analysis Assessment on Intrastate Bus Traffic Controllers

NASA Astrophysics Data System (ADS)

Yen Bin, Teo; Azlis-Sani, Jalil; Nur Annuar Mohd Yunos, Muhammad; Ismail, S. M. Sabri S. M.; Tajedi, Noor Aqilah Ahmad

2016-11-01

Public transportation acts as social mobility and caters the daily needs of the society for passengers to travel from one place to another. This is true for a country like Malaysia where international trade has been growing significantly over the past few decades. Task analysis assessment was conducted with the consideration of cognitive ergonomic view towards problem related to human factors. Conducting research regarding the task analysis on bus traffic controllers had allowed a better understanding regarding the nature of work and the overall monitoring activities of the bus services. This paper served to study the task analysis assessment on intrastate bus traffic controllers and the objectives of this study include to conduct task analysis assessment on the bus traffic controllers. Task analysis assessment for the bus traffic controllers was developed via Hierarchical Task Analysis (HTA). There are a total of five subsidiary tasks on level one and only two were able to be further broken down in level two. Development of HTA allowed a better understanding regarding the work and this could further ease the evaluation of the tasks conducted by the bus traffic controllers. Thus, human error could be reduced for the safety of all passengers and increase the overall efficiency of the system. Besides, it could assist in improving the operation of the bus traffic controllers by modelling or synthesizing the existing tasks if necessary.

The Development of an Instrument to Measure Attitudes Toward Education for Parenthood and the Responses of Working- and Middle-Class Students to the Instrument.

ERIC Educational Resources Information Center

Bridges, K. Robert

Although many education for parenthood (EP) programs have been developed and implemented, a formal systematic determination of the attitudes of the groups to be served has yet to be conducted. A 110-item Education for Parenthood Attitude Scale (EPAS) was developed to measure attitudes toward EP, and administered to a sample of high school (N=226)…

Formative assessment in the development of an obesity prevention component for the expanded food and nutrition education program in Texas.

PubMed

Thompson, Debbe; Cullen, Karen Weber; Reed, Debra B; Konzelmann, Karen; Smalling, Aggie Lara

2011-01-01

This study conducted formative research (surveys, focus groups) to assess the nutrition education needs of clients in the Texas Expanded Food and Nutrition Education Program prior to curriculum revision. Participants were current Expanded Food and Nutrition Education Program participants in 3 Texas cities (Austin, Houston, San Antonio). Data were used to tailor the curriculum to the target population. This research provides evidence that members of the target audience can provide valuable insights into a particular topic. Formative work prior to intervention development should be conducted to identify key issues regarding a particular topic and to evaluate potential educational approaches.

Emerging Sealing Technologies Development

NASA Technical Reports Server (NTRS)

2005-01-01

Under this Cooperative Agreement, the objective was to investigate several emerging sealing technologies of interest to the Mechanical Components Branch of National Aeronautics and Space Administration Glenn Research Center at Lewis Field (NASA GRC). The majority of the work conducted was to support the development of Solid Oxide Fuel Cells for application to aeronautic auxiliary power units, though technical investigations of interest to other groups and projects were also conducted. In general, accomplishments and results were periodically reported to the NASA Technical Monitor, the NASA GRC Seal Team staff, and NASA GRC project management. Several technical reports, journal articles, and presentations were given internally to NASA GRC and to the external public.

Development and evaluation of vision rehabilitation devices.

PubMed

Luo, Gang; Peli, Eli

2011-01-01

We have developed a range of vision rehabilitation devices and techniques for people with impaired vision due to either central vision loss or severely restricted peripheral visual field. We have conducted evaluation studies with patients to test the utilities of these techniques in an effort to document their advantages as well as their limitations. Here we describe our work on a visual field expander based on a head mounted display (HMD) for tunnel vision, a vision enhancement device for central vision loss, and a frequency domain JPEG/MPEG based image enhancement technique. All the evaluation studies included visual search paradigms that are suitable for conducting indoor controllable experiments.

Validation and Use of a Predictive Modeling Tool: Employing Scientific Findings to Improve Responsible Conduct of Research Education.

PubMed

Mulhearn, Tyler J; Watts, Logan L; Todd, E Michelle; Medeiros, Kelsey E; Connelly, Shane; Mumford, Michael D

2017-01-01

Although recent evidence suggests ethics education can be effective, the nature of specific training programs, and their effectiveness, varies considerably. Building on a recent path modeling effort, the present study developed and validated a predictive modeling tool for responsible conduct of research education. The predictive modeling tool allows users to enter ratings in relation to a given ethics training program and receive instantaneous evaluative information for course refinement. Validation work suggests the tool's predicted outcomes correlate strongly (r = 0.46) with objective course outcomes. Implications for training program development and refinement are discussed.

Thermal conductivity of rigid foam insulations for aerospace vehicles

NASA Astrophysics Data System (ADS)

Barrios, M.; Van Sciver, S. W.

2013-05-01

The present work describes measurements of the effective thermal conductivity of NCFI 24-124 foam, a spray-on foam insulation used formerly on the Space Shuttle external fuel tank. A novel apparatus to measure the effective thermal conductivity of rigid foam at temperatures ranging from 20 K to 300 K was developed and used to study three samples of NCFI 24-124 foam insulation. In preparation for measurement, the foam samples were either treated with a uniquely designed moisture absorption apparatus or different residual gases to study their impact on the effective thermal conductivity of the foam. The resulting data are compared to other measurements and mathematical models reported in the literature.

Barriers and Solutions to Conducting Large International, Interdisciplinary Research Projects

NASA Astrophysics Data System (ADS)

Pischke, Erin C.; Knowlton, Jessie L.; Phifer, Colin C.; Gutierrez Lopez, Jose; Propato, Tamara S.; Eastmond, Amarella; de Souza, Tatiana Martins; Kuhlberg, Mark; Picasso Risso, Valentin; Veron, Santiago R.; Garcia, Carlos; Chiappe, Marta; Halvorsen, Kathleen E.

2017-12-01

Global environmental problems such as climate change are not bounded by national borders or scientific disciplines, and therefore require international, interdisciplinary teamwork to develop understandings of their causes and solutions. Interdisciplinary scientific work is difficult enough, but these challenges are often magnified when teams also work across national boundaries. The literature on the challenges of interdisciplinary research is extensive. However, research on international, interdisciplinary teams is nearly non-existent. Our objective is to fill this gap by reporting on results from a study of a large interdisciplinary, international National Science Foundation Partnerships for International Research and Education (NSF-PIRE) research project across the Americas. We administered a structured questionnaire to team members about challenges they faced while working together across disciplines and outside of their home countries in Argentina, Brazil, and Mexico. Analysis of the responses indicated five major types of barriers to conducting interdisciplinary, international research: integration, language, fieldwork logistics, personnel and relationships, and time commitment. We discuss the causes and recommended solutions to the most common barriers. Our findings can help other interdisciplinary, international research teams anticipate challenges, and develop effective solutions to minimize the negative impacts of these barriers to their research.

Barriers and Solutions to Conducting Large International, Interdisciplinary Research Projects.

PubMed

Pischke, Erin C; Knowlton, Jessie L; Phifer, Colin C; Gutierrez Lopez, Jose; Propato, Tamara S; Eastmond, Amarella; de Souza, Tatiana Martins; Kuhlberg, Mark; Picasso Risso, Valentin; Veron, Santiago R; Garcia, Carlos; Chiappe, Marta; Halvorsen, Kathleen E

2017-12-01

Global environmental problems such as climate change are not bounded by national borders or scientific disciplines, and therefore require international, interdisciplinary teamwork to develop understandings of their causes and solutions. Interdisciplinary scientific work is difficult enough, but these challenges are often magnified when teams also work across national boundaries. The literature on the challenges of interdisciplinary research is extensive. However, research on international, interdisciplinary teams is nearly non-existent. Our objective is to fill this gap by reporting on results from a study of a large interdisciplinary, international National Science Foundation Partnerships for International Research and Education (NSF-PIRE) research project across the Americas. We administered a structured questionnaire to team members about challenges they faced while working together across disciplines and outside of their home countries in Argentina, Brazil, and Mexico. Analysis of the responses indicated five major types of barriers to conducting interdisciplinary, international research: integration, language, fieldwork logistics, personnel and relationships, and time commitment. We discuss the causes and recommended solutions to the most common barriers. Our findings can help other interdisciplinary, international research teams anticipate challenges, and develop effective solutions to minimize the negative impacts of these barriers to their research.

Disability identity development model: Voices from the ADA-generation.

PubMed

Forber-Pratt, Anjali J; Zape, Marianne P

2017-04-01

For persons with disabilities, 2015 was a historic year, marking the 25th anniversary of the Americans with Disability Act (ADA) and the 40th anniversary of the passing of the Individuals with Disabilities Education Act (IDEA). It is important to consider the effects of this fundamental shift towards equal opportunity and participation on persons with disabilities' identity development. In practice, however, there are few empirical studies that have looked at this phenomenon and even fewer models of disability identity development. We conducted a qualitative study to explore the disability identity development of college students with disabilities. At two research sites, we conducted individual interviews and observations with 17 college students with varying disabilities, and used in vivo and structural coding analysis to identify and develop themes. The results of this study led to establishing a model of psychosocial identity development for individuals with disabilities. The model highlights four developmental statuses: acceptance, relationship, adoption and engagement. Sharing voices from the participants themselves, we also provide commentary on the possible impacts of this work for healthcare professionals and areas for future research. Our findings suggest that this model of psychosocial disability identity development can help to provide an understanding of the psychological processes that individuals with disabilities go through. The model also has application as a framework for healthcare professionals and psychologists who are working with individuals with disabilities. Copyright © 2016 Elsevier Inc. All rights reserved.

A behavioural approach in the development of work-related interventions for cancer survivors: an exploratory review.

PubMed

Duijts, S F A; Bleiker, E M A; Paalman, C H; van der Beek, A J

2017-09-01

The application of behavioural change models and theories has not been studied, and behavioural determinants have not been considered, in the context of cancer and work. The aim of this study is to assess the relevance of a behavioural approach in the development of work-related interventions for cancer survivors. Two search strategies were conducted to identify studies on (1) lifestyle interventions (exercise, smoking, alcohol intake and diet), based on behavioural models and theories, in cancer survivors; (2) behavioural determinants regarding work. Medline, Embase, PsycInfo, CINAHL and the Cochrane Controlled Trial Register were searched (2000-2015). Studies were assessed on their eligibility, and findings were listed and categorised. Thirty-four studies exploring lifestyle interventions in cancer survivors were retrieved. The behavioural change models and theories most regularly used were the Transtheoretical Model and Social Cognitive Theory. Furthermore, 26 studies on the role of behavioural determinants regarding work were found. The most frequently considered determinants were self-efficacy, social norms, workers' expectations towards work or recovery, attitude, motivation and meaning of work. The results indicate the significance of behavioural change models and theories and of behavioural determinants in related research areas, which encourages a behavioural approach in the development of work-related interventions for cancer survivors. © 2016 John Wiley & Sons Ltd.

A Citizen Science and Government Collaboration: Developing ...

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency (EPA) is actively involved in supporting citizen science projects and providing communities with information and assistance for conducting their own air pollution monitoring. As part of a Regional Applied Research Effort (RARE) project, EPA's Office of Research and Development (ORD) worked collaboratively with EPA Region 2 and the Ironbound Community Corporation (ICC) in Newark, New Jersey, to develop and test the “Air Sensor Toolbox for Citizen Scientists.” In this collaboration, citizen scientists measured local gaseous and particulate air pollution levels by using a customized low-cost sensor pod designed and fabricated by EPA. This citizen science air quality measurement project provided an excellent opportunity for EPA to evaluate and improve the Toolbox resources available to communities. The Air Sensor Toolbox, developed in coordination with the ICC, can serve as a template for communities across the country to use in developing their own air pollution monitoring programs in areas where air pollution is a concern. This pilot project provided an opportunity for a highly motivated citizen science organization and the EPA to work together directly to address environmental concerns within the community. Useful lessons were learned about how to improve coordination between the government and communities and the types of tools and technologies needed for conducting an effective citizen science project that can be app

Willingness to pay, borrow, and work for rural water service improvements in developing countries

NASA Astrophysics Data System (ADS)

Abramson, Adam; Becker, Nir; Garb, Yaakov; Lazarovitch, Naftali

2011-11-01

In many least developed countries, inadequate user willingness to pay (WTP) to achieve cost recovery for improvements to substandard rural water services is a major barrier to reaching targets such as the Millennium Development Goals. A meta-analysis of 21 contingent valuation studies conducted in least developed countries reveals that cost recovery from user demand is infeasible in most cases, and that rural areas are especially unwilling to pay enough to finance water service improvements. We argue that this is largely due to inability to pay cash rather than an absence of demand and propose two alternative financing approaches that may enable capital deficient communities to afford improvements. A discrete choice experiment, conducted in a rural catchment of Zambia, compares conventional cash-based WTP for different water service attributes with two alternative measures. (1) Willingness to borrow: Monthly payments in cash, with a no-interest loan given to the user. (2) Willingness to work: Instead of cash, payment in the form of contributing time devoted to unskilled labor. To different degrees, these alternatives elicit higher demand and enable cost recovery, providing evidence that demand-driven, economically sustainable water development efforts, as described here for Simango, Zambia, may be implemented for rural, resource-poor communities.

Steam electrolysis by solid oxide electrolysis cells (SOECs) with proton-conducting oxides.

PubMed

Bi, Lei; Boulfrad, Samir; Traversa, Enrico

2014-12-21

Energy crisis and environmental problems caused by the conventional combustion of fossil fuels boost the development of renewable and sustainable energies. H2 is regarded as a clean fuel for many applications and it also serves as an energy carrier for many renewable energy sources, such as solar and wind power. Among all the technologies for H2 production, steam electrolysis by solid oxide electrolysis cells (SOECs) has attracted much attention due to its high efficiency and low environmental impact, provided that the needed electrical power is generated from renewable sources. However, the deployment of SOECs based on conventional oxygen-ion conductors is limited by several issues, such as high operating temperature, hydrogen purification from water, and electrode stability. To avoid these problems, proton-conducting oxides are proposed as electrolyte materials for SOECs. This review paper provides a broad overview of the research progresses made for proton-conducting SOECs, summarizing the past work and finding the problems for the development of proton-conducting SOECs, as well as pointing out potential development directions.

Fuel Thermo-physical Characterization Project. Fiscal Year 2014 Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burkes, Douglas; Casella, Andrew M.; Buck, Edgar C.

2015-03-15

The Office of Material Management and Minimization (M3) Reactor Conversion Fuel Thermo-Physical Characterization Project at Pacific Northwest National Laboratory (PNNL) was tasked with using PNNL facilities and processes to receive irradiated low enriched uranium–molybdenum (LEU-Mo) fuel plate samples and perform analysis in support of the M3 Reactor Conversion Program. This work is in support of the M3 Reactor Conversion Fuel Development Pillar that is managed by Idaho National Laboratory. The primary research scope was to determine the thermo-physical properties as a function of temperature and burnup. Work conducted in Fiscal Year (FY) 2014 complemented measurements performed in FY 2013 onmore » four additional irradiated LEU-Mo fuel plate samples. Specifically, the work in FY 2014 investigated the influence of different processing methods on thermal property behavior, the absence of aluminum alloy cladding on thermal property behavior for additional model validation, and the influence of higher operating surface heat flux / more aggressive irradiation conditions on thermal property behavior. The model developed in FY 2013 and refined in FY 2014 to extract thermal properties of the U-Mo alloy from the measurements conducted on an integral fuel plate sample (i.e., U-Mo alloy with a thin Zr coating and clad in AA6061) continues to perform very well. Measurements conducted in FY 2014 on samples irradiated under similar conditions compare well to measurements performed in FY 2013. In general, there is no gross influence of fabrication method on thermal property behavior, although the difference in LEU-Mo foil microstructure does have a noticeable influence on recrystallization of grains during irradiation. Samples irradiated under more aggressive irradiation conditions, e.g., higher surface heat flux, revealed lower thermal conductivity when compared to samples irradiated at moderate surface heat fluxes, with the exception of one sample. This report documents thermal property measurements conducted in FY 2014 and compares results to values obtained from literature and measurements performed in FY 2013, where applicable, along with appropriate discussion.« less

Advanced in-duct sorbent injection for SO{sub 2} control. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stouffer, M.R.; Withium, J.A.; Rosenhoover, W.A.

1994-12-01

The objective of this research project was to develop a second generation duct sorbent injection technology as a cost-effective compliance option for the 1990 Clean Air Act Amendments. Research and development work was focused on the Advanced Coolside process, which showed the potential for exceeding the original performance targets of 90% SO{sub 2} removal and 60% sorbent utilization. Process development was conducted in a 1000 acfm pilot plant. The pilot plant testing showed that the Advanced Coolside process can achieve 90% SO{sub 2} removal at sorbent utilizations up to 75%. The testing also showed that the process has the potentialmore » to achieve very high removal efficiency (90 to >99%). By conducting conceptual process design and economic evaluations periodically during the project, development work was focused on process design improvements which substantially lowered process capital and operating costs, A final process economic study projects capital costs less than one half of those for limestone forced oxidation wet FGD. Projected total SO{sub 2} control cost is about 25% lower than wet FGD for a 260 MWe plant burning a 2.5% sulfur coal. A waste management study showed the acceptability of landfill disposal; it also identified a potential avenue for by-product utilization which should be further investigated. Based on the pilot plant performance and on the above economic projections, future work to scale up the Advanced Coolside process is recommended.« less

Engineering Research and Development and Technology thrust area report FY92

DOE Office of Scientific and Technical Information (OSTI.GOV)

Langland, R.T.; Minichino, C.

1993-03-01

The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) to conduct high-quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, theymore » are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year 1992. Its intent is to provide timely summaries of objectives, theories, methods, and results. The nine thrust areas for this fiscal year are: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Emerging Technologies; Fabrication Technology; Materials Science and Engineering; Microwave and Pulsed Power; Nondestructive Evaluation; and Remote Sensing and Imaging, and Signal Engineering.« less

Work Function and Conductivity Change in Polyaniline.

NASA Astrophysics Data System (ADS)

Chinn, Douglas Alan

1995-01-01

The purpose of this study was to elucidate some basic material properties of the conducting polymer polyaniline. Because of the intractable nature of the polymer, methods to make thin films were developed. The polymer was dissolved in formic acid and cast onto silicon substrates that had four metal leads in a parallel configuration. It was discovered that a cast film could be used as a substrate for the subsequent growth of additional film by electrochemical techniques. The polymer will spontaneously change oxidation states both in air and in solution if oxidized or reduced electrochemically. The change in oxidation states is seen as a changing open cell potential in solution and a change in work function and resistance in air. UV-visible and infrared spectroscopy were used to characterize the polymer during relaxation. The work function decreases from both the oxidized and reduced states, but resistance increases from the reduced state and decreases from the oxidized state in air. A two-phase model which has ordered conducting regions and disordered insulating regions has been used to describe the relaxation phenomena. The relaxation is caused by rearrangement within the film of dopant acid and water, allowing the film to develop ordered regions. It has been determined that chemical polyaniline and electrochemical polyaniline are nearly identical chemically, with the main differences being morphological. The relaxation phenomena can be used to make chemical sensors. As the film relaxes, electrons become available. The electrons reduce metallic ions, which interact with a detectant gas in a gas stream above the film. In films containing Hg_2Cl_2 work function decreases and resistance decreases when in contact with hydrogen cyanide in a dry nitrogen stream.

Development of high capacity, high rate lithium ion batteries utilizing metal fiber conductive additives

NASA Astrophysics Data System (ADS)

Ahn, Soonho; Kim, Youngduk; Kim, Kyung Joon; Kim, Tae Hyung; Lee, Hyungkeun; Kim, Myung H.

As lithium ion cells dominate the battery market, the performance improvement is an utmost concern among developers and researchers. Conductive additives are routinely employed to enhance electrode conductivity and capacity. Carbon particulates—graphite or carbon black powders—are conventional and popular choices as conductive fillers. However, percolation requirements of particles demand significant volumetric content of impalpable, and thereby high area conductive fillers. As might be expected, the electrode active surface area escalates unnecessarily, resulting in overall increase in reaction with electrolytes and organic solvents. The increased reactions usually manifest as an irreversible loss of anode capacity, gradual oxidation and consumption of electrolyte on the cathode—which causes capacity decline during cycling—and an increased threat to battery safety by gas evolution and exothermic solvent oxidation. In this work we have utilized high aspect ratio, flexible, micronic metal fibers as low active area and high conductivity additives. The metal fibers appear well dispersed within the electrode and to satisfy percolation requirements very efficiently at very low volumetric content compared to conventional carbon-based conductive additives. Results from 18650-type cells indicate significant enhancements in electrode capacity and high rate capability while the irreversible capacity loss is negligible.

Thermal conductivity of a film of single walled carbon nanotubes measured with infrared thermal imager

NASA Astrophysics Data System (ADS)

Feng, Ya; Inoue, Taiki; Xiang, Rong; Chiashi, Shohei; Maruyama, Shigeo

Heat dissipation has restricted the modern miniaturization trend with the development of electronic devices. Theoretically proven to be with high axial thermal conductivity, single walled carbon nanotubes (SWNT) have long been expected to cool down the nanoscale world. Even though the tube-tube contact resistance limits the capability of heat transfer of the bulk film, the high intrinsic thermal conductivity of SWNT still glorify the application of films of SWNT network as a thermal interface material. In this work, we proposed a new method to straightly measure the thermal conductivity of SWNT film. We bridged two cantilevered Si thin plate with SWNT film, and kept a steady state heat flow in between. With the infrared camera to record the temperature distribution, the Si plates with known thermal conductivity can work as a reference to calculate the heat flux going through the SWNT film. Further, the thermal conductivity of the SWNT film can be obtained through Fourier's law after deducting the effect of thermal radiation. The sizes of the structure, the heating temperature, the vacuum degree and other crucial impact factors are carefully considered and analyzed. The author Y. F. was supported through the Advanced Integration Science Innovation Education and Research Consortium Program by the Ministry of Education, Culture, Sport, Science and Technology.

M4SF-17LL010301071: Thermodynamic Database Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zavarin, M.; Wolery, T. J.

2017-09-05

This progress report (Level 4 Milestone Number M4SF-17LL010301071) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Argillite Disposal R&D Work Package Number M4SF-17LL01030107. The DR Argillite Disposal R&D control account is focused on the evaluation of important processes in the analysis of disposal design concepts and related materials for nuclear fuel disposal in clay-bearing repository media. The objectives of this work package are to develop model tools for evaluating impacts of THMC process on long-term disposal of spent fuel in argillite rocks, and to establish the scientific basis for high thermal limits. This work is contributing tomore » the GDSA model activities to identify gaps, develop process models, provide parameter feeds and support requirements providing the capability for a robust repository performance assessment model by 2020.« less

Work Domain Analysis Methodology for Development of Operational Concepts for Advanced Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hugo, Jacques

2015-05-01

This report describes a methodology to conduct a Work Domain Analysis in preparation for the development of operational concepts for new plants. This method has been adapted from the classical method described in the literature in order to better deal with the uncertainty and incomplete information typical of first-of-a-kind designs. The report outlines the strategy for undertaking a Work Domain Analysis of a new nuclear power plant and the methods to be used in the development of the various phases of the analysis. Basic principles are described to the extent necessary to explain why and how the classical method wasmore » adapted to make it suitable as a tool for the preparation of operational concepts for a new nuclear power plant. Practical examples are provided of the systematic application of the method and the various presentation formats in the operational analysis of advanced reactors.« less

Beyond the Classroom Wall: Community Engagement Instruction

ERIC Educational Resources Information Center

Wang, Jenny; Lai, Shu-Chuan; Wang, Chao-Min

2016-01-01

This study (n = 11) examined active community-school collaborative classes using sociocultural constructivist approaches over an academic year in an early childhood institute. A semi-formal interview was conducted to describing how the early childhood teachers and community members worked collaboratively to develop community engagement activities…

Identification and testing of countermeasures for specific alcohol accident types and problems. Volume 2, General driver alcohol problem

DOT National Transportation Integrated Search

1984-12-01

This report summarizes work conducted to investigate the feasibility of developing effective countermeasures directed at specific alcohol-related accidents or problems. In Phase I, literature and accident data were reviewed to determine the scope and...

We Are Ames

NASA Image and Video Library

2015-01-26

Ames Research Center, one of NASA's ten field Centers, is located in the heart of California's Silicon Valley. For 75 years, Ames has led the Agency and the country in conducting world-class research and development. Let some of Ames' employees tell you about the work that they do.

Perfecting scientists’ collaboration and problem-solving skills in the virtual team environment

USDA-ARS?s Scientific Manuscript database

Perfecting Scientists’ Collaboration and Problem-Solving Skills in the Virtual Team Environment Numerous factors have contributed to the proliferation of conducting work in virtual teams at the domestic, national, and global levels: innovations in technology, critical developments in software, co-lo...

Ethical Applications of Technology in HRD

ERIC Educational Resources Information Center

Lin, Hong

2006-01-01

Human resource development (HRD) professionals are increasingly incorporating technology into their work activities. However, research that examines the ethics in the use of technology by HRD professionals is still underrepresented in the literature. This article first conducts a PEST (political, economic, social-cultural, and technological)…

ENGINEERING MANPOWER BULLETIN NUMBER 9.

ERIC Educational Resources Information Center

ALDEN, JOHN D.

DESIGNED TO INFORM LEADERS IN INDUSTRY, GOVERNMENT, AND EDUCATION, WHOSE RESPONSIBILITY INCLUDES AWARENESS OF ENGINEERING MANPOWER DEVELOPMENTS, THIS BULLETIN REPORTS A STUDY CONDUCTED BY THE ENGINEERING MANPOWER COMMISSION OF ENGINEERS IN THE ARMED SERVICES. THE WORK OF THE COMMISSION IS TO ASSURE THE MOST EFFECTIVE UTILIZATION OF ENGINEERING…

Cumulative Development of Attentional Theory.

ERIC Educational Resources Information Center

Posner, Michael I.

1982-01-01

Describes current work in selective attention within a framework of research conducted over the past century. Presents evidence that findings at the level of performance, subjective experience, and neural systems can be linked, even though these findings are not yet reducible to a single theory. (Author/GC)

WECEP Guide (Second Edition).

ERIC Educational Resources Information Center

Eastern Illinois Univ., Charleston.

This guide is intended for personnel who are responsible for planning and conducting a Work Experience and Career Exploration Program (WECEP), a special cooperative education program for 14- and 15-year-old special needs students. Chapter 1 provides guidelines for program development, including rationale, purpose, advantages, a basic planning…

Low-temperature catalytic gasification of food processing wastes. 1995 topical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elliott, D.C.; Hart, T.R.

The catalytic gasification system described in this report has undergone continuing development and refining work at Pacific Northwest National Laboratory (PNNL) for over 16 years. The original experiments, performed for the Gas Research Institute, were aimed at developing kinetics information for steam gasification of biomass in the presence of catalysts. From the fundamental research evolved the concept of a pressurized, catalytic gasification system for converting wet biomass feedstocks to fuel gas. Extensive batch reactor testing and limited continuous stirred-tank reactor tests provided useful design information for evaluating the preliminary economics of the process. This report is a follow-on to previousmore » interim reports which reviewed the results of the studies conducted with batch and continuous-feed reactor systems from 1989 to 1994, including much work with food processing wastes. The discussion here provides details of experiments on food processing waste feedstock materials, exclusively, that were conducted in batch and continuous- flow reactors.« less

Focus groups with working parents of school-aged children: what's needed to improve family meals?

PubMed

Fulkerson, Jayne A; Kubik, Martha Y; Rydell, Sarah; Boutelle, Kerri N; Garwick, Ann; Story, Mary; Neumark-Sztainer, Dianne; Dudovitz, Bonnie

2011-01-01

To conduct focus groups to identify parents' perceptions of barriers to family meals and elucidate ideas to guide the development of interventions to overcome barriers. Focus groups were conducted with a convenience sample of 27 working parents in urban community settings. Parents reported enjoying the sharing/bonding at meals, but they reported limited time for meal preparation and frequent multi-tasking at mealtime. They wanted their children's help with meal preparation, but they were concerned about the time and "mess" involved. They were frustrated with the limited range of food items their children would eat. Preferred program ideas included feeding tips/recipes, meal planning/preparation, and changing food offerings. Findings indicate a need for creative programs and professional nutrition guidance to facilitate family engagement in planning and cooking quick, healthful meals; development of skill building; and increasing healthful food consumption. Copyright © 2011 Society for Nutrition Education. Published by Elsevier Inc. All rights reserved.

Nano-Particle Enhanced Polymer Materials for Space Flight Applications

NASA Technical Reports Server (NTRS)

Criss, Jim M., Jr.; Powell, William D.; Connell, John W.; Stallworth-Bordain, Yemaya; Brown, Tracy R.; Mintz, Eric A.; Schlea, Michelle R.; Shofne, Meisha L.

2009-01-01

Recent advances in materials technology both in polymer chemistry and nano-materials warrant development of enhanced structures for space flight applications. This work aims to develop spacecraft structures based on polymer matrix composites (PMCs) that utilize these advancements.. Multi-wall carbon nano-tubes (MWCNTs) are expected ·to increase mechanical performance, lower coefficient of thermal expansion (CTE), increase electrical conductivity (mitigate electrostatic charge), increase thermal conductivity, and reduce moisture absorption of the resultant space structures. In this work, blends of MWCNTs with PETI-330 were prepared and characterized. The nano-reinforced resins were then resin transfer molded (RTM) into composite panels using M55J carbon fabric and compared to baseline panels fabricated from a cyanate ester (RS-3) or a polyimide (PETI-330) resin containing no MWCNTs. In addition, methods of pre-loading the fabric with the MWCNTs were also investigated. The effects of the MWCNTs on the resin processing properties and on the composite end-use properties were also determined.

Future NTP Development Synergy Leveraged from Current J-2X Engine Development

NASA Astrophysics Data System (ADS)

Ballard, Richard O.

2008-01-01

This paper is a discussion of how the many long-lead development elements required for the realization of a future nuclear thermal propulsion (NTP) system can be effectively leveraged from the ongoing work being conducted on the J-2X engine program for the Constellation Program. Development studies conducted to date for NTP forward planning have identified a number of technical areas that will require advancement to acceptable technology readiness levels (TRLs) before they can be utilized in NTP system development. These include high-temperature, high-area ratio nozzle extension; long-life, low-NPSP turbomachinery; and low-boiloff propellant management, and a qualified nuclear fuel element. The current J-2X program is working many of these areas that can be leveraged to support NTP development in a highly compatible and synergistic fashion. In addition to supporting technical development, there are other programmatic issues being worked in the J-2X program that can be leveraged by a future NTP development program. These include compliance with recently-evolved space system requirements such as human-rating, fault tolerance and fracture control. These and other similar mandatory system requirements have been adopted by NASA and can result in a significant technical impact beyond elevation of the root technologies required by NTP. Finally, the exploitation of experience, methodologies, and procedures developed by the J-2X program in the areas of verification, qualification, certification, altitude simulation testing, and facility definition will be especially applicable to a future NTP system. The similarities in system mission (in-space propulsion) and operational environment (vacuum, zero-gee) between J-2X and NTP make this highly synergistic. Thus, it can be shown that the collective benefit of leveraging experience and technologies developed during the J-2X program can result in significant savings in development cost and schedule for NTP.

Future NTP Development Synergy Leveraged from Current J-2X Engine Development

NASA Technical Reports Server (NTRS)

Ballard, Richard O.

2008-01-01

This paper is a discussion of how the many long-lead development elements required for the realization of a future nuclear thermal propulsion (NTP) system can be effectively leveraged from the ongoing work being conducted on the J-2X engine program for the Constellation Program. Development studies conducted to date for NTP forward planning have identified a number of technical areas that will require advancement to acceptable technology readiness levels (TRLs) before they can be utilized in NTP system development. These include high-temperature, high-area ratio nozzle extension; long-life, low-NPSP. turbomachinery; and low-boiloff propellant management; and a qualified nuclear fuel element. The current J-2X program is working many of these areas that can be leveraged to support NTP development in a highly compatible and synergistic fashion. In addition to supporting technical development, there are other programmatic issues being worked in the J-2X program that can be leveraged by a future NTP development program. These include compliance with recently-evolved space system requirements such as human-rating, fault tolerance and fracture control. These and other similar mandatory system requirements have been adopted by NASA and can result in a significant technical impact beyond elevation of the root technologies required by NTP. Finally, the exploitation of experience, methodologies, and procedures developed by the J-2X program in the areas of verification, qualification, certification, altitude simulation testing, and facility definition will be especially applicable to a future NTP system. The similarities in system mission (in-space propulsion) and operational environment (vacuum, zero-gee) between J-2X and NTP make this highly synergistic. Thus, it can be $hown that the collective benefit of leveraging experience and technologies developed during the J-2X program can result in significant savings in development cost and schedule for NTP.

Development of a work improvement checklist for occupational mental health focused on requests from workers.

PubMed

Tahara, Hiroyuki; Yamada, Tatsuji; Nagafuchi, Keiko; Shirakawa, Chie; Suzuki, Kiyomi; Mafune, Kosuke; Kubota, Shinya; Hiro, Hisanori; Mishima, Norio; Nagata, Shoji

2009-01-01

To develop tools offering definite orientation for managers and employees to support their work improvement through occupational mental health. This research was a part of the Mental Health Improvement & Reinforcement Study (MIR study), conducted from October 2004 to March 2006. We developed a trial version named the Kaizen Check List (KCL) by referring to problem solving methods for quality management. Then we improved it for a formal version named MIR Research of Recognition (MIRROR). A feedback form named MIR Action Guidance (MIRAGe) was also developed. We analyzed data from 1,953 respondents at five manufacturing enterprises in Japan using MIRROR and the Brief Job Stress Questionnaire (BJSQ) to determine whether or not the workers requesting work improvement had more stress than other workers. The KCL had 47 items, which indicated desirable working conditions for mental health at work, and four answer categories. MIRROR has 45 selected items and improved answer categories. MIRAGe displays the results of MIRROR and step-by-step guidance for work improvement. Respondents with request had significantly higher scores in stressor and lower scores in buffer factors compared with respondents without request in many items of MIRROR. A combinational use of MIRROR and stress scales is useful for finding worksites with high risk factors for mental health and for directing focus on work improvement at these worksites according to workers' requests.

Recent progress in nanocomposites based on conducting polymer: application as electrochemical sensors

NASA Astrophysics Data System (ADS)

El Rhazi, Mama; Majid, Sanaa; Elbasri, Miloud; Salih, Fatima Ezzahra; Oularbi, Larbi; Lafdi, Khalid

2018-06-01

Over the years, intensive research works have been devoted to conducting polymers due to their potential application in many fields such as fuel cell, sensors, and capacitors. To improve the properties of these compounds, several new approaches have been developed which consist in combining conducting polymers and nanoparticles. Then, this review intends to give a clear overview on nanocomposites based on conducting polymers, synthesis, characterization, and their application as electrochemical sensors. For this, the paper is divided into two parts: the first part will highlight the nanocomposites synthesized by combination of carbon nanomaterials (CNMs) and conducting polymers. The preparation of polymer/CNMs such as graphene and carbon nanotube modified electrode is presented coupled with relevant applications. The second part consists of a review of nanocomposites synthesized by combination of metal nanoparticles and conducting polymers.

Development of vapor phase hydrogen peroxide sterilization process for spacecraft applications

NASA Technical Reports Server (NTRS)

Rohatgi, N.; Schubert, W.; Knight, J.; Quigley, M.; Forsberg, G.; Ganapathi, G.; Yarbrough, C.; Koukol, R.

2001-01-01

This paper will present test data and discussion on the work we are conducting at JPL to address the following issues: 1) efficacy of sterilization process; 2) diffusion of hydrogen peroxide under sterilization process conditions into hard to reach places; 3) materials and components compatibility with the sterilization process and 4) development of methodology to protect sensitive components from hydrogen peroxide vapor.

Initial flight test of a Loran-C receiver/data collection system

NASA Technical Reports Server (NTRS)

Fischer, J. P.; Nickum, J. D.

1978-01-01

Development of a low cost Loran C receiver for general aviation use is discussed. The preparation and procedure of a flight test conducted with a receiver design which utilizes a phase locked loop oscillator to track the Loran C signals is described. It is indicated that such a receiver is a viable alternative for future work in developing a low cost Loran-C navigator.

Development of a Preschool Teacher's Guidance Qualifications Scale and Its Psychometric Properties

ERIC Educational Resources Information Center

Bilgin, Hülya

2017-01-01

The goal of this study is to develop a Guidance Qualification Scale for Preschool Teachers and examine the validity and reliability of the scale. The research was conducted with 374 teachers working in preschools in Istanbul and they were chosen by the random sampling method. Factor analysis was carried out for the construct validity of the scale.…

Technology and public policy: The process of technology assessment in the federal government

NASA Technical Reports Server (NTRS)

Coates, V. T.

1975-01-01

A study was conducted to provide a descriptive and analytical review of the concept of technology assessment and the current status of its applications in the work of the federal executive agencies. The origin of the term technology assessment was examined along with a brief history of its discussion and development since 1966 and some of the factors influencing that development.

Modular Rapid E-Learning Framework (MORELF) in Desktop Virtualization Environment: An Effective Hybrid Implementation in Nurse Education

ERIC Educational Resources Information Center

Parlakkilic, Alattin

2015-01-01

Generally it is not easy for an instructor to prepare and deliver electronic courses via e-learning. Therefore it is necessary to work and develop an easy system. In this context module technology was used to for provide modularity in conducting educational development of e-learning course. Then, rapid e-learning was used for more quick and easy…

Use of Formative Research to Develop a Yoga Curriculum for High-Risk Youth: Implementation Considerations

ERIC Educational Resources Information Center

Miller, Shari; Herman-Stahl, Mindy; Fishbein, Diana; Lavery, Bud; Johnson, Michelle; Markovits, Lara

2014-01-01

The purpose of this study is to elucidate the use of formative research to adapt, develop, and pretest a mindful yoga curriculum for high-risk youth attending a nontraditional high school. The formative work was conducted in the first year of a larger project to test the efficacy of a mindful yoga program through a randomized controlled trial. The…

PC Tutor. Bericht uber ein PC-gestutzes Tutorensystem = PC Tutor. Report on a Tutoring System with Personal Computer. ZIFF Papiere 75.

ERIC Educational Resources Information Center

Fritsch, Helmut

A project was conducted to increase as well as to professionalize communication between tutors and learners in a West German university's distance education program by the use of personal computers. Two tutors worked on the systematic development of a PC-based correcting system. The goal, apart from developing general language skills in English,…

Fuels planning: science synthesis and integration; social issues fact sheet 01: Developing personal responsibility for fuels reduction: Building a successful program to engage property owners

Treesearch

Rocky Mountain Research Station USDA Forest Service

2004-01-01

In the course of work as a land manager, you will no doubt be involved in developing programs to achieve various objectives, including the improvement of fuels management on private lands. This fact sheet describes six steps that will help you plan and conduct a successful program.

Mini-dome Fresnel lens photovoltaic concentrator development

NASA Technical Reports Server (NTRS)

Oneill, Mark J.; Piszczor, Michael F., Jr.

1991-01-01

Since 1986 work on a new high-performance, light-weight space photovoltaic concentration array has been conducted. An update on the mini-dome lens concentrator array development program is provided. Recent prototype cell and lens test results indicate that near-term array performance goals of 300 w/sq m and 100 w/kg are feasible, and that a longer-term goal of 200 w/kg is reasonable.

Development of an ADP Training Program to Serve the EPA Data Processing Community.

DTIC Science & Technology

1976-07-29

divide, compute , perform and alter statements; data representation and conversion; table processing; and indexed sequential and random access file...processing. The course workshop will include the testing of coded exercises and problems on a computer system. CLASS SIZE: Individualized METHODS/CONDUCT...familiarization with computer concepts will be helpful. OBJECTIVES OF CURRICULUM After completing this course, the student should have developed a working

Advanced Algal Systems Fact Sheet

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-06-01

Research and development (R&D) on advanced algal biofuels and bioproducts presents an opportunity to sustainably expand biomass resource potential in the United States. The Bioenergy Technologies Office’s (BETO’s) Advanced Algal Systems Program is carrying out a long-term, applied R&D strategy to lower the costs of algal biofuel production by working with partners to develop revolutionary technologies and conduct crosscutting analyses to better understand the potential

Work design and management in the manufacturing sector: development and validation of the Work Organisation Assessment Questionnaire.

PubMed

Griffiths, A; Cox, T; Karanika, M; Khan, S; Tomás, J M

2006-10-01

To examine the factor structure, reliability, and validity of a new context-specific questionnaire for the assessment of work and organisational factors. The Work Organisation Assessment Questionnaire (WOAQ) was developed as part of a risk assessment and risk reduction methodology for hazards inherent in the design and management of work in the manufacturing sector. Two studies were conducted. Data were collected from 524 white- and blue-collar employees from a range of manufacturing companies. Exploratory factor analysis was carried out on 28 items that described the most commonly reported failures of work design and management in companies in the manufacturing sector. Concurrent validity data were also collected. A reliability study was conducted with a further 156 employees. Principal component analysis, with varimax rotation, revealed a strong 28-item, five factor structure. The factors were named: quality of relationships with management, reward and recognition, workload, quality of relationships with colleagues, and quality of physical environment. Analyses also revealed a more general summative factor. Results indicated that the questionnaire has good internal consistency and test-retest reliability and validity. Being associated with poor employee health and changes in health related behaviour, the WOAQ factors are possible hazards. It is argued that the strength of those associations offers some estimation of risk. Feedback from the organisations involved indicated that the WOAQ was easy to use and meaningful for them as part of their risk assessment procedures. The studies reported here describe a model of the hazards to employee health and health related behaviour inherent in the design and management of work in the manufacturing sector. It offers an instrument for their assessment. The scales derived which form the WOAQ were shown to be reliable, valid, and meaningful to the user population.

Web based listing of agents associated with new onset work-related asthma.

PubMed

Rosenman, K D; Beckett, W S

2015-05-01

Work-related asthma is common and yet remains a challenge to diagnose. Access to a listing of agents associated with work-related asthma has been suggested as useful in assisting in the diagnosis. The Association of Occupational and Environmental Clinics (AOEC) developed criteria that were used to review the peer-reviewed medical literature published in English. Based on this review, substances were designated either as a sensitizing agent or an irritant. The reviews were conducted by a board certified internist/pulmonologist/occupational medicine specialist from 2002 to 2007 and a board certified internist/occupational medicine physician from 2008- date. All reviews were then reviewed by the nine member AOEC board of directors. The original list of agents associated with new onset work-related asthma was derived from the tables of a text book on work-related asthma. After 13 years of review, there are 327 substances designated as asthma agents on the AOEC list; 173 (52.9%) coded as sensitizers, 35 (10.7%) as generally recognized as an asthma causing agent, four (1.2%) as irritants, two (0.6%) as both a sensitizer and an irritant and 113(34.6%) agents that still need to be reviewed. The AOEC has developed a readily available web based listing of agents associated with new onset work-related asthma in adults. The listing is based on peer-reviewed criteria. The listing is updated twice a year. Regular review of the peer-reviewed medical literature is conducted to determine whether new substances should be added to the list. Clinicians should find the list useful when considering the diagnosis of work-related asthma. Copyright © 2015 Elsevier Ltd. All rights reserved.

Low Loss Graded Index Polymer Optical Fiber for Local Networking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Claus, Richard Otto

The objective of this Department of Energy SBIR program has been to develop technology for the advancement of advanced computing systems. NanoSonic worked with two subcontractors, the Polymicro Division of Molex, a U.S.-based manufacturer of specialized optical fiber and fiber components, and Virginia Tech, a research university involved through the Global Environment for Network Innovations (GENI) program in high-speed computer networking research. NanoSonic developed a patented molecular-level self-assembly process to manufacture polymer-based optical fibers in a way similar to the modified chemical vapor deposition (MCVD) approach typically used to make glass optical fibers. Although polymer fiber has a higher attenuationmore » per unit length than glass fiber, short connectorized polymer fiber jumpers offer significant cost savings over their glass counterparts, particularly due to the potential use of low-cost plastic fiber connectors. As part of the SBIR commercialization process, NanoSonic exclusively licensed this technology to a large ($100B+ market cap) U.S.-based manufacturing conglomerate near the end of the first year of the Phase II program. With this base technology developed and licensed, NanoSonic then worked with Polymicro to address secondary program goals of using related but not conflicting production methods to enhance the performance of other specialty optical fiber products and components, and Virginia Tech continued its evaluation of developed polymer fibers in its network infrastructure system on the university campus. We also report our current understanding of the observation during the Phase I program of quantum conductance and partial quantum conductance in metal-insulator-metal (MIM) devices. Such conductance behavior may be modeled as singlemode behavior in one-dimensional electrically conducting waveguides, similar in principle to singlemode optical propagation in dielectric fiber waveguides. Although NanoSonic has not licensed any of the additional technology developed during the second year of the program, several proprietary discussions with major materials companies are underway as of the conclusion of Phase II.« less

Engaging Patients and Caregivers Managing Rare Diseases to Improve the Methods of Clinical Guideline Development: A Research Protocol

PubMed Central

Kinnett, Kathi; Grant, Sean; Lucas, Ann; Martin, Ann; Denger, Brian; Peay, Holly; Coulter, Ian; Fink, Arlene

2017-01-01

Background Clinical guidelines provide systematically developed recommendations for deciding on appropriate health care options for specific conditions and clinical circumstances. Up until recently, patients and caregivers have rarely been included in the process of developing care guidelines. Objective This project will develop and test a new online method for including patients and their caregivers in this process using Duchenne muscular dystrophy (DMD) care guidelines as an example. The new method will mirror and complement the RAND/UCLA Appropriateness Method (RAM)—the gold standard approach for conducting clinical expert panels that uses a modified Delphi format. RAM is often used in clinical guideline development to determine care appropriateness and necessity in situations where existing clinical evidence is uncertain, weak, or unavailable. Methods To develop the new method for engaging patients and their caregivers in guideline development, we will first conduct interviews with experts on RAM, guideline development, patient engagement, and patient-centeredness and engage with Duchenne patients and caregivers to identify how RAM should be modified for the purposes of patient engagement and what rating criteria should patients and caregivers use to provide their input during the process of guideline development. Once the new method is piloted, we will test it by conducting two concurrently run patient/caregiver panels that will rate patient-centeredness of a subset of DMD care management recommendations already deemed clinically appropriate and necessary. The ExpertLens™ system—a previously evaluated online modified Delphi system that combines two rounds of rating with a round of feedback and moderated online discussions—will be used to conduct these panels. In addition to developing and testing the new engagement method, we will work with the members of our project’s Advisory Board to generate a list of best practices for enhancing the level of patient and caregiver involvement in the guideline development process. We will solicit input on these best practice from Duchenne patients, caregivers, and clinicians by conducting a series of round-table discussions and making a presentation at an annual conference on Duchenne. Results The study protocol was reviewed by RAND’s Human Subjects Protection Committee, which determined it to be exempt from review. Interviews with RAM experts have been completed. The projected study completion date is May 2020. Conclusions We expect that the new method will make it easier to engage large numbers of patients and caregivers in the process of guideline development in a rigorous and culturally appropriate manner that is consistent with the way clinicians participate in guideline development. Moreover, this project will develop best practices that could help involve patients and caregivers in the clinical guideline development process in other clinical areas, thereby facilitating the work of guideline developers. PMID:28455279

How primary health care staff working in rural and remote areas access skill development and expertise to support health promotion practice.

PubMed

McFarlane, Kathryn A; Judd, Jenni; Wapau, Hylda; Nichols, Nina; Watt, Kerrianne; Devine, Sue

2018-05-01

Health promotion is a key component of comprehensive primary health care. Health promotion approaches complement healthcare management by enabling individuals to increase control over their health. Many primary healthcare staff have a role to play in health promotion practice, but their ability to integrate health promotion into practice is influenced by their previous training and experience. For primary healthcare staff working in rural and remote locations, access to professional development can be limited by what is locally available and prohibitive in terms of cost for travel and accommodation. This study provides insight into how staff at a large north Queensland Aboriginal community controlled health service access skill development and health promotion expertise to support their work. A qualitative exploratory study was conducted. Small group and individual semi-structured interviews were conducted with staff at Apunipima Cape York Health Council (n=9). A purposive sampling method was used to recruit participants from a number of primary healthcare teams that were more likely to be involved in health promotion work. Both on-the-ground staff and managers were interviewed. All participants were asked how they access skill development and expertise in health promotion practice and what approaches they prefer for ongoing health promotion support. The interviews were transcribed verbatim and analysed thematically. All participants valued access to skill development, advice and support that would assist their health promotion practice. Skill development and expertise in health promotion was accessed from a variety of sources: conferences, workshops, mentoring or shared learning from internal and external colleagues, and access to online information and resources. With limited funds and limited access to professional development locally, participants fostered external and internal organisational relationships to seek in-kind advice and support. Irrespective of where the advice came from, it needed to be applicable to work with Aboriginal and Torres Strait Islander remote communities. To improve health outcomes in rural and remote communities, the focus on health promotion and prevention approaches must be strengthened. Primary healthcare staff require ongoing access to health promotion skill development and expertise to increase their capacity to deliver comprehensive primary health care. Practice-based evidence from staff working in the field provides a greater understanding of how skill development and advice are accessed. Many of these strategies can be formalised through organisational plans and systems, which would ensure that a skilled health promotion workforce is sustained.

Multiscale Multiphysics Developments for Accident Tolerant Fuel Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gamble, K. A.; Hales, J. D.; Yu, J.

2015-09-01

U 3Si 2 and iron-chromium-aluminum (Fe-Cr-Al) alloys are two of many proposed accident-tolerant fuel concepts for the fuel and cladding, respectively. The behavior of these materials under normal operating and accident reactor conditions is not well known. As part of the Department of Energy’s Accident Tolerant Fuel High Impact Problem program significant work has been conducted to investigate the U 3Si 2 and FeCrAl behavior under reactor conditions. This report presents the multiscale and multiphysics effort completed in fiscal year 2015. The report is split into four major categories including Density Functional Theory Developments, Molecular Dynamics Developments, Mesoscale Developments, andmore » Engineering Scale Developments. The work shown here is a compilation of a collaborative effort between Idaho National Laboratory, Los Alamos National Laboratory, Argonne National Laboratory and Anatech Corp.« less

[Supervisors and Employment Counselors in Messidor Transitional Social Firms Supporting People with Psychiatric Disability to Gain Competitive Employment].

PubMed

de Pierrefeu, Inès; Corbière, Marc; Pachoud, Bernard

Objectives Some programs have been developed in France for helping people with a psychiatric disability to get competitive employment, especially prevocational programs such as transitional social firms. However, these programs have not been studied until now. Studies on supported employment programs (evidence-based practices) conducted in other countries demonstrated that variation of work outcomes is due, among other factors, to employment specialists' competencies. These results highlight the need for describing more specifically the work of the two professionals, employment counselors and supervisors, working in transitional social firms in order to better understand their role, tasks and competencies. Therefore, the objective of this study aims at describing the roles, tasks and competencies of these two professionals working in transitional social firms, to better understand how they support people with psychiatric disability for eventually obtaining competitive employment.Methods A qualitative method was used to describe roles, tasks and competencies of employment counselors and supervisors working in the transitional social firms of the Messidor's association (7 regions). In sum, 24 individual interviews with employment counselors and supervisors of these social firms as well as 7 focus groups with the two types of professionals, were conducted.Results This study allowed to define the work of the two professionals (role and tasks) and a list of 110 competencies for employment counselors as well as 155 competencies for supervisors working in these transitional social firms, emerged from qualitative analyses. This "double support" has been defined as a complementary approach helping workers to change their own perceptions, becoming more confident in their work abilities, and thus helping them to gain competitive employment. On the one hand, the employment counselor supports each worker in developing strategies and actions to reach competitive employment, and put in place "job development skills" to coordinate his role with key stakeholders (e.g. psychiatrist, employers) involved in the work integration of people with severe mental disorders. On the other hand, the supervisor is following each worker all day long, training and helping them to overcome potential difficulties regarding the work to do, and building confidence and self-esteem in the workers under their supervision, which are all key elements to gain competitive employment.Conclusion Clinical implications are suggested regarding the recruitment of professionals working in transitional social firms, and thus improving work outcomes for people with a severe mental illness.

Functionalization of silicon nanowires by conductive and non-conductive polymers

NASA Astrophysics Data System (ADS)

Belhousse, S.; Tighilt, F.-Z.; Sam, S.; Lasmi, K.; Hamdani, K.; Tahanout, L.; Megherbi, F.; Gabouze, N.

2017-11-01

The work reports on the development of hybrid devices based on silicon nanowires (SiNW) with polymers and the difference obtained when using conductive and non-conductive polymers. SiNW have attracted much attention due to their importance in understanding the fundamental properties at low dimensionality as well as their potential application in nanoscale devices as in field effect transistors, chemical or biological sensors, battery electrodes and photovoltaics. SiNW arrays were formed using metal assisted chemical etching method. This process is simple, fast and allows obtaining a wide range of silicon nanostructures. Hydrogen-passivated SiNW surfaces show relatively poor stability. Surface modification with organic species confers the desired stability and enhances the surface properties. For this reason, this work proposes a covalent grafting of organic material onto SiNW surface. We have chosen a non-conductive polymer polyvinylpyrrolidone (PVP) and conductive polymers polythiophene (PTh) and polypyrrole (PPy), in order to evaluate the electric effect of the polymers on the obtained materials. The hybrid structures were elaborated by the polymerization of the corresponding conjugated monomers by electrochemical route; this electropolymerization offers several advantages such as simplicity and rapidity. SiNW functionalization by conductive polymers has shown to have a huge effect on the electrical mobility. Hybrid surface morphologies were characterized by scanning electron microscopy (SEM), infrared spectroscopy (FTIR-ATR) and contact angle measurements.

Shifts in nursing and medical student's attitudes, beliefs and behaviours about interprofessional work: An interprofessional placement in ambulatory care.

PubMed

Seaman, Karla; Saunders, Rosemary; Dugmore, Helen; Tobin, Claire; Singer, Rachel; Lake, Fiona

2018-05-12

To examine students' beliefs, behaviours and attitudes in relation to interprofessional socialisation, and their expectations and experience, before and after a two-week clinical placement in ambulatory care. Interprofessional clinical placements for students are important for developing an understanding of interprofessional collaboration and identity, for the benefit of patient care. Ambulatory care environment involves collaborative management of complex chronic problems. This educator supported placement enabled final year nursing and medical students to work together. A descriptive matched pre-post study was conducted. Students' completed an online questionnaire pre and post their clinical placement. The questionnaire comprised of three sections; demographic information, the Interprofessional Socialisation and Valuing Scale and open-ended questions. Descriptive analysis and paired t-tests were conducted for the three subscales and thematic analysis of qualitative responses was conducted. Sixty-two of the 151 students between 2011-2014 completed both surveys. There was a significant increase post placement in the overall Interprofessional Socialisation and Valuing Scale scores. The change was greater for nursing students compared with medical students, although for both groups the change was small. The majority had a good to very good experience learning each other's and their own professions, and identified the Nurse Educator and Teaching Registrar as key to success. A clinical placement in an ambulatory setting for nursing and medical students resulted in an increase in self-perceived ability to work with others and in valuing working with others. Interprofessional clinical placements are essential for students to understand interprofessional practice for better patient outcomes and developing their own perspective of future work within an interprofessional team. Ambulatory care is an ideal environment for nursing and other health professional students to engage in interprofessional clinical placements. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Distance Education and Open Learning in Sub-Saharan Africa: Criteria and Conditions for Quality and Critical Success Factor-- Working Group on Distance Education and Open Learning. A Survey of Policy and Practice. Final Report

ERIC Educational Resources Information Center

Commonwealth of Learning, 2004

2004-01-01

Both of these "Surveys of policy and practice" were conducted on behalf of COL by the South African Institute for Distance Education (SAIDE) as part of COL's partnership agreement with the Association for the Development of Education in Africa (ADEA) Working Group on Distance Education and Open Learning. The first report identifies…

Program Manager: Journal of the Defense Systems Management College. Volume 19, Number 1, January-February 1990

DTIC Science & Technology

1990-02-01

proposal to the HQ USAF than optimum communication be- While the report indicated that this recommended a long-range, integrated tween the user and the...SRA), conduct of The three functional Working Integrated logistics program plan- tradeoff studies, and development of Groups are separated into the...as well * INTEGRATION as a rapid retargeting capability. V. SYSTEM REQUIREMENTS Working Conditions At the same time, SAC realized that VI. SYSTEM

Toxin Inhibition - Deconvolution Strategies and Assay Screening of Combinatorial Peptide Libraries

DTIC Science & Technology

2007-08-01

that could serve as lead compounds in the development of drug therapies to toxins. The libraries have typical structures of X I - X2 - hinge - X3 - X4...or passive vaccines have limited efficacies. There are no drug prophylaxes or therapies available. This technical report describes research to provide...broadly applicable drug discovery methods for a wide range of toxins. Future Work: The work conducted in the TIF project raised and renewed interest in

Mining CRRES IDM Pulse Data and CRRES Environmental Data to Improve Spacecraft Charging/Discharging Models and Guidelines

NASA Technical Reports Server (NTRS)

Brautigam, D. H.; Frederickson, A. R.

2004-01-01

One can truly predict the charging and pulsing in space over a year's time using only the physics that worked for periods of an hour and less in prior publications. All portions of the task were achieved, including the optional portion of determining a value for conductivity that best .t the data. Fortran statements were developed that are required for the NUMIT runs to work with this kind of data from space. In addition to developing the Fortran for NUMIT, simple correlations between the IDM pulsing history and the space radiation were observed because we now have a better characterization of the space radiation. The study showed that: (1) the new methods for measurement of charge storage and conduction in insulators provide the correct values to use for prediction of charging and pulsing in space; (2) the methods in NUMIT that worked well for time durations less than hours now work well for durations of months; (3) an average spectrum such as AE8 is probably not a good guide for predicting pulsing in space one must take time dependence into account in order to understand insulator pulsing; and (4) the old method for predicting pulse rates in space that was based on the CRRES data could be improved to include dependencies on material parameters.

[First-aid training at work on interpersonal development: exploratory study on employees in integration into the workplace centres].

PubMed

Lafitte, Pascale; Bridot, Michel; Semedo, Luis; Gagnayre, Rémi

2016-01-01

The National Institute of Research and Security and the “CHANTIER Ecole” network have developed first-aid training for employees of integration into the workplace centres. Specifically geared towards workplace safety, but similar in its content to home first-aid and rescue training, this training is also designed to enhance individual and collective responsibility and citizenship. The purpose of this study was to evaluate the personal and interpersonal effects of first-aid training of these employees by considering their social and professional difficulties in terms of psychosocial skills, such as empowerment, stress and emotions management, and decision-making capacity. A descriptive-inductive study was conducted over 18 months based on the grounded theory approach. Five integration into the work-place centres participated in the study and 34 interviews were conducted. These results raise several questions concerning: a) the characteristics of this public targeted by this training and their perception of integration into the workplace; b) the suitability of this training to working conditions and the link with other types of training such as family health education; c) the relationship between citizenship training and first-aid training at work, as it is more applicable to family training than workplace training. A quantitative study is considered to confirm these observations in other integration into the workplace centres.

Nurses' Lived Experience of Working with Nursing Students in Clinical Wards: a Phenomenological Study

PubMed Central

Parvan, Kobra; Shahbazi, Shahla; Ebrahimi, Hossein; Valizadeh, Susan; Rahmani, Azad; Jabbarzadeh Tabrizi, Faranak; Esmaili, Fariba

2018-01-01

Introduction: Despite being aware of the importance of nurses’ role in providing clinical training to nursing students, studies show that sufficient research has not yet been conducted on the experience of clinical nurses who are engaged in training nursing students outside their normal working hours. The present study aim to describe the experience of these nurses who are training outside their routine working hours. Methods: This study was conducted using descriptive-phenomenology method. Twelve nurses was participated in this research. Data were collected using purposive sampling method and face to face interviews based on nurses’ real life experience of students’ learning in clinical settings through answering open-ended questions. Spiegel burg analysis method was used to analyze the data. Results: The result of data analysis was the derivation of four themes and eight sub-themes. Themes included "nurses as teaching sources", "changes in the balance of doing routine tasks", "professional enthusiasm", and "nurses as students' professional socialization source of inspiration". Sub-themes included "efficient education", "poor education", "support", "interference in the role," "self-efficacy development", "inner satisfaction", "positive imaging" and "being a model". Conclusion: It is necessary that academic centers plan for teaching nurses working on a contractual basis in the field of the evaluation method and various methods of teaching. The findings also suggested the development of individual self-efficacy in clinical nurses who train students. PMID:29637056

Light Water Reactor Sustainability Program Status Report on the Grizzly Code Enhancements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Novascone, Stephen R.; Spencer, Benjamin W.; Hales, Jason D.

2013-09-01

This report summarizes work conducted during fiscal year 2013 to work toward developing a full capability to evaluate fracture contour J-integrals to the Grizzly code. This is a progress report on ongoing work. During the next fiscal year, this capability will be completed, and Grizzly will be capable of evaluating these contour integrals for 3D geometry, including the effects of thermal stress and large deformation. A usable, limited capability has been developed, which is capable of evaluating these integrals on 2D geometry, without considering the effects of material nonlinearity, thermal stress or large deformation. This report presents an overview ofmore » the approach used, along with a demonstration of the current capability in Grizzly, including a comparison with an analytical solution.« less

Research of aerohydrodynamic and aeroelastic processes on PNRPU HPC system

NASA Astrophysics Data System (ADS)

Modorskii, V. Ya.; Shevelev, N. A.

2016-10-01

Research of aerohydrodynamic and aeroelastic processes with the High Performance Computing Complex in PNIPU is actively conducted within the university priority development direction "Aviation engine and gas turbine technology". Work is carried out in two areas: development and use of domestic software and use of well-known foreign licensed applied software packets. In addition, the third direction associated with the verification of computational experiments - physical modeling, with unique proprietary experimental installations is being developed.

Development of a slip sensor using separable bilayer with Ecoflex-NBR film

NASA Astrophysics Data System (ADS)

Kim, Sung Joon; Moon, Hyungpil; Choi, Hyouk Ryeol; Koo, Ja Choon

2017-04-01

Polymer film-type slip sensor is presented by using novel working principle rather than measuring micro-vibration. The sensor is comprised of bilayer with Ecoflex and NBR(acrylonitrile butadiene rubber) films divided by di-electric. When slip occur on surface, bilayer have relative displacement from each other because friction-induced vibration make a clearance between two layers. This displacement can be obtained by capacitance difference. CNT(carbon nanotube) was employed for electrode because of flexible and stretchable characteristics. Also normal and shear force can be decoupled by the working principle. To verify developed sensor, slip test apparatus was designed and experiments were conducted.

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eitouni, Hany; Yang, Jin; Pratt, Russell

2014-09-29

The purpose of this project was for Seeo to develop a high energy lithium based technology with targets of over 500 Wh/l and 325 Wh/kg. Seeo would leverage the work already achieved with its unique proprietary solid polymer DryLyteTM technology in cells which had a specific energy density of 220 Wh/kg. The development work was focused on establishing a dual electrolyte system, coated cathode particle techniques, various types of additives, and different conductive salts. The program had a duration of three years, with Seeo delivering the final cells at the end of 2014 for evaluation by a DOE laboratory.

Assessing research activity and capacity of community-based organizations: development and pilot testing of an instrument.

PubMed

Humphries, Debbie L; Carroll-Scott, Amy; Mitchell, Leif; Tian, Terry; Choudhury, Shonali; Fiellin, David A

2014-01-01

Although awareness of the importance of the research capacity of community-based organizations (CBOs) is growing, a uniform framework of the research capacity domains within CBOs has not yet been developed. To develop a framework and instrument (the Community REsearch Activity assessment Tool [CREAT]) for assessing the research activity and capacity of CBOs that incorporates awareness of the different data collection and analysis priorities of CBOs. We conducted a review of existing tools for assessing research capacity to identify key capacity domains. Instrument items were developed through an iterative process with CBO representatives and community researchers. The CREAT was then pilot tested with 30 CBOs. The four primary domains of the CREAT framework include 1) organizational support for research, 2) generalizable experiences, 3) research specific experiences, and 4) funding. Organizations reported a high prevalence of activities in the research-specific experiences domain, including conducting literature reviews (70%), use of research terminology (83%), and primary data collection (100%). Respondents see research findings as important to improve program and service delivery, and to seek funds for new programs and services. Funders, board members, and policymakers are the most important dissemination audiences. The work reported herein advances the field of CBO research capacity by developing a systematic framework for assessing research activity and capacity relevant to the work of CBOs, and by developing and piloting an instrument to assess activity in these domains.

FY15 Status of Immersion Phased Array Ultrasonic Probe Development and Performance Demonstration Results for Under Sodium Viewing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diaz, Aaron A.; Larche, Michael R.; Mathews, Royce

2015-09-01

This Technical Letter Report (TLR) describes work conducted at the Pacific Northwest National Laboratory (PNNL) during FY 2015 on the under-sodium viewing (USV) PNNL project 58745, Work Package AT-15PN230102. This TLR satisfies PNNL’s M3AT-15PN2301027 milestone, and is focused on summarizing the design, development, and evaluation of a two-dimensional matrix phased-array probe referred to as serial number 3 (SN3). In addition, this TLR also provides the results from a performance demonstration of in-sodium target detection trials at 260°C using a one-dimensional 22-element linear array developed in FY14 and referred to as serial number 2 (SN2).

Pneumatic injection system using a hot exhaust gases, developed in Institute of Automobiles and Internal Combustion Engines of Cracow University of Technology

NASA Astrophysics Data System (ADS)

Marek, W.; Śliwiński, K.

2016-09-01

The article concerns research carried out by the Krakow University of Technology on the concept of a pneumatic fuel injection spark ignition engines. In this artkule an example of an application of this type of power to the Wankel's engine, together with a description of its design and operating principles and the benefits of its use. The work was carried out over many years by Prof. Stanislaw Jarnuszkiewicz despite the development of many patents but not widely used in engines. Authors who were involved in the team-work of the team of Prof. Jarnuszkiewicz, after conducting exploratory studies, believed that this solution has development potential and this will be presented in future articles.

NREL/University of Delaware Offshore Wind R&D Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-10-393

DOE Office of Scientific and Technical Information (OSTI.GOV)

Musial, Walt

2015-11-12

Specifically, the work under this CRADA includes, but is not limited to, the development of test procedures for an offshore test site in Delaware waters; testing of installed offshore wind turbines; performance monitoring of those turbines; and a program of research and development on offshore wind turbine blades, components, coatings, foundations, installation and construction of bottom-fixed structures, environmental impacts, policies, and more generally on means to enhance the reliability, facilitate permitting, and reduce costs for offshore wind turbines. This work will be conducted both at NREL's National Wind Technology Center and participant facilities, as well as the established offshore windmore » test sites.« less

A census study exploring the training needs of nurses working in Kwong Wah Hospital and Wong Tai Sin Hospital in Hong Kong, China.

PubMed

Lai, Yuk-Wah

2013-01-01

As part of the strategic professional development plan for nurses, training needs analysis was conducted from August 2011 to February 2012, in the form of descriptive research with survey design. The aim was to support nursing staff in their professional development needs and promote staff engagement. Consecutive sampling was employed; all full time nurses working in Kwong Wah Hospital (KWH) and Wong Tai Sin Hospital (WTSH) were recruited and invited to complete a self-administered questionnaire. Based on the findings and conclusions, follow up strategies were proposed. Management then built a sustainable learning environment for KWH and WTSH nurses in the 2012-2015 professional development plan.

Biological Oxidation of DCE through Manganese Addition

DTIC Science & Technology

2008-08-01

indication that remediation has been incomplete and some environmental and human health risk may remain. Therefore, developing, testing and...Alamac) site in Lumberton, Robeson County, NC. Solutions-IES has worked on this site for ten years conducting groundwater assessment , remediation ...44 5.1.4 Site Remediation Efforts

Evaluation of field-produced hot mix asphalt (HMA) mixtures with fractionated recycled asphalt pavement (RAP) : 2007 Illinois tollway field mix trials.

DOT National Transportation Integrated Search

2008-10-01

To test the fractionated recycled asphalt pavement (FRAP) materials, the Illinois Tollway, working through its : contractors and consultants, developed and conducted a project on the applicability and feasibility of using : increased RAP contents thr...

Recognizing "Connection to Nature": Perspectives from the Field

ERIC Educational Resources Information Center

Perrin, Jeffrey L.

2018-01-01

The researcher conducted 17 semistructured interviews with environmental education professionals working in the field of nature connection to better understand how practitioners define and measure connection to nature. Participants noted the development of a conservation ethic as the most important indication of connection to nature. Practitioners…

Developmental Rainbow: Early Childhood Development Profile.

ERIC Educational Resources Information Center

Mahoney, Gerald; Mahoney, Frida

One of the most important skills of professionals who work with young children is the ability to assess developmental functioning through informal observation. This skill serves as the foundation for screening or identifying children in need of developmental services, conducting play-based developmental assessments, and helping parents to…

Behavioral Intervention Materials Compendium. OPRE Report 2018-08

ERIC Educational Resources Information Center

Anzelone, Caitlin, Ed.; Dechausay, Nadine, Ed.; Alemany, Xavier, Ed.

2018-01-01

The Behavioral Interventions to Advance Self-Sufficiency (BIAS) project conducted 15 randomized controlled trials of behavioral interventions across eight states, in the domains of work support, child support, and child care. BIAS used a systematic approach called "behavioral diagnosis and design" to develop the interventions and their…

HEDS - EPA DATABASE SYSTEM FOR PUBLIC ACCESS TO HUMAN EXPOSURE DATA

EPA Science Inventory

Human Exposure Database System (HEDS) is an Internet-based system developed to provide public access to human-exposure-related data from studies conducted by EPA's National Exposure Research Laboratory (NERL). HEDS was designed to work with the EPA Office of Research and Devel...

Self-Regulated Learning Behaviour in the Finance Industry

ERIC Educational Resources Information Center

Milligan, Colin; Fontana, Rosa Pia; Littlejohn, Allison; Margaryan, Anoush

2015-01-01

Purpose: This paper aims to explore the role of self-regulatory behaviours in predicting workplace learning. As work practices in knowledge-intensive domains become more complex, individual workers must take greater responsibility for their ongoing learning and development. Design/methodology/approach: The study was conducted with knowledge…

Report: Survey Results on Information Used by Water Utilities to Conduct Vulnerability Assessments

EPA Pesticide Factsheets

Report #2004-M-0001, November 21, 2003. EPA developed a Strategic Plan for Homeland Security (Plan), dated Sept 2002, which states that EPA will work with the States, tribes, drinking water utilities, and others to enhance the security of water utilities.

Assessment of the work environment of faculty of a Medical College in Pakistan.

PubMed

Saeed, Abid; Butt, Zahid Ahmad

2014-01-01

Extensive research is done on nursing work environments but less is known about the job conditions and environments of other health professionals. This study was aimed to fill this information gap by highlighting the factors affecting the work environment and stressors causing turnover of staff. A cross sectional study was conducted in Bolan Medical College Quetta for the assessment of working environment of the faculty from 22nd April to 22nd July 2012. All permanent teaching staff was included. A structured questionnaire was adopted fromI health sciences association of Alberta (HSSA), 2006 work Environment Survey. An observational check list for assessment of the physical environment /infrastructure and other general physical stuff was used. The faculty menibers were-not-satisfied with the security and safety of their work place but were satisfied with salaries, employer, and management. Work teams and relationship between employees and employers were respectful with good communication. Majority found their work times stressful and opportunities for on job trainings and professional development, adequate tools, equipment and conditions were mostly lacking. The overall working environment is not that good and few areas need serious attention like: professional development, trainings, adequate equipment, and security.

High Thermal Conductivity and High Wear Resistance Tool Steels for cost-effective Hot Stamping Tools

NASA Astrophysics Data System (ADS)

Valls, I.; Hamasaiid, A.; Padré, A.

2017-09-01

In hot stamping/press hardening, in addition to its shaping function, the tool controls the cycle time, the quality of the stamped components through determining the cooling rate of the stamped blank, the production costs and the feasibility frontier for stamping a given component. During the stamping, heat is extracted from the stamped blank and transported through the tool to the cooling medium in the cooling lines. Hence, the tools’ thermal properties determine the cooling rate of the blank, the heat transport mechanism, stamping times and temperature distribution. The tool’s surface resistance to adhesive and abrasive wear is also an important cost factor, as it determines the tool durability and maintenance costs. Wear is influenced by many tool material parameters, such as the microstructure, composition, hardness level and distribution of strengthening phases, as well as the tool’s working temperature. A decade ago, Rovalma developed a hot work tool steel for hot stamping that features a thermal conductivity of more than double that of any conventional hot work tool steel. Since that time, many complimentary grades have been developed in order to provide tailored material solutions as a function of the production volume, degree of blank cooling and wear resistance requirements, tool geometries, tool manufacturing method, type and thickness of the blank material, etc. Recently, Rovalma has developed a new generation of high thermal conductivity, high wear resistance tool steel grades that enable the manufacture of cost effective tools for hot stamping to increase process productivity and reduce tool manufacturing costs and lead times. Both of these novel grades feature high wear resistance and high thermal conductivity to enhance tool durability and cut cycle times in the production process of hot stamped components. Furthermore, one of these new grades reduces tool manufacturing costs through low tool material cost and hardening through readily available gas-quenching, whereas the other new grade enables a faster manufacturing of the tool at reduced cost by eliminating the time and money consuming high temperature hardening altogether. The latter newly developed grade can be hardened from a soft delivery state for easy machining to 52 HRc by way of a simple low temperature precipitation hardening. In this work, these new grades and the role of the tool material’s thermal, mechanical and tribological properties as well as their processing features will be discussed in light of enabling the manufacture of intelligent hot stamping tools.

An investigation of hydraulic conductivity estimation in a ground-water flow study of Northern Long Valley, New Jersey

USGS Publications Warehouse

Hill, Mary C.

1985-01-01

The purpose of this study was to develop a methodology to be used to investigate the aquifer characteristics and water supply potential of an aquifer system. In particular, the geohydrology of northern Long Valley, New Jersey, was investigated. Geohydrologic data were collected and analyzed to characterize the site. Analysis was accomplished by interpreting the available data and by using a numerical simulation of the watertable aquifer. Special attention was given to the estimation of hydraulic conductivity values and hydraulic conductivity structure which together define the hydraulic conductivity of the modeled aquifer. Hydraulic conductivity and all other aspects of the system were first estimated using the trial-and-error method of calibration. The estimation of hydraulic conductivity was improved using a least squares method to estimate hydraulic conductivity values and by improvements in the parameter structure. These efforts improved the calibration of the model far more than a preceding period of similar effort using the trial-and-error method of calibration. In addition, the proposed method provides statistical information on the reliability of estimated hydraulic conductivity values, calculated heads, and calculated flows. The methodology developed and applied in this work proved to be of substantial value in the evaluation of the aquifer considered.

Electrochemical removal of material from metallic work

DOEpatents

Csakvary, Tibor; Fromson, Robert E.

1980-05-13

Deburring, polishing, surface forming and the like are carried out by electrochemical machining with conformable electrode means including an electrically conducting and an insulating web. The surface of the work to be processed is covered by a deformable electrically insulating web or cloth which is perforated and conforms with the work. The web is covered by a deformable perforated electrically conducting screen electrode which also conforms with, and is insulated from, the work by the insulating web. An electrolyte is conducted through the electrode and insulating web and along the work through a perforated elastic member which engages the electrode under pressure pressing the electrode and web against the work. High current under low voltage is conducted betwen the electrode and work through the insulator, removing material from the work. Under the pressure of the elastic member, the electrode and insulator continue to conform with the work and the spacing between the electrode and work is maintained constant.

Lightning protection of distribution systems

NASA Astrophysics Data System (ADS)

Darveniza, M.; Uman, M. A.

1982-09-01

Research work on the lightning protection of distribution systems is described. The rationale behind the planning of the first major phase of the work - the field experiments conducted in the Tampa Bay area during August 1978 and July to September 1979 is explained. The aims of the field work were to characterize lightning in the Tampa Bay area, and to identify the lightning parameters associated with the occurrence of line outages and equipment damage on the distribution systems of the participating utilities. The equipment developed for these studies is fully described. The field work provided: general data on lightning - e.g., electric and magnetic fields of cloud and ground flashes; data from automated monitoring of lightning activity; stroke current waveshapes and peak currents measured at distribution arresters; and line outage and equipment damage on 13 kV networks in the Tampa Bay area. Computer aided analyses were required to collate and to process the accumulated data. The computer programs developed for this work are described.

Working memory and language: skill-specific or domain-general relations to mathematics?

PubMed

Purpura, David J; Ganley, Colleen M

2014-06-01

Children's early mathematics skills develop in a cumulative fashion; foundational skills form a basis for the acquisition of later skills. However, non-mathematical factors such as working memory and language skills have also been linked to mathematical development at a broad level. Unfortunately, little research has been conducted to evaluate the specific relations of these two non-mathematical factors to individual aspects of early mathematics. Thus, the focus of this study was to determine whether working memory and language were related to only individual aspects of early mathematics or related to many components of early mathematics skills. A total of 199 4- to 6-year-old preschool and kindergarten children were assessed on a battery of early mathematics tasks as well as measures of working memory and language. Results indicated that working memory has a specific relation to only a few-but critically important-early mathematics skills and language has a broad relation to nearly all early mathematics skills. Copyright © 2014 Elsevier Inc. All rights reserved.

Investigation of bio polymer electrolyte based on cellulose acetate-ammonium nitrate for potential use in electrochemical devices.

PubMed

Monisha, S; Mathavan, T; Selvasekarapandian, S; Milton Franklin Benial, A; Aristatil, G; Mani, N; Premalatha, M; Vinoth Pandi, D

2017-02-10

Proton conducting materials create prime interest in electro chemical device development. Present work has been carried out to design environment friendly new biopolymer electrolytes (BPEs) using cellulose acetate (CA) complex with different concentrations of ammonium nitrate (NH 4 NO 3 ), which have been prepared as film and characterized. The 50mol% CA and 50mol% NH 4 NO 3 complex has highest ionic conductivity (1.02×10 -3 Scm -1 ). Differential scanning calorimetry shows the changes in glass transition temperature depends on salt concentration. Structural analysis indicates that the highest ionic conductivity complex exhibits more amorphous nature. Vibrational analysis confirms the complex formation, which has been validated theoretically by Gaussian 09 software. Conducting element in the BPEs has been predicted. Primary proton battery and proton exchange membrane fuel cell have been developed for highest ionic conductivity complex. Output voltage and power performance has been compared for single fuel cell application, which manifests the present BPE holds promise application in electrochemical devices. Copyright © 2016 Elsevier Ltd. All rights reserved.

Thermal Analysis of Magnetically-Coupled Pump for Cryogenic Applications

NASA Technical Reports Server (NTRS)

Senocak, Inanc; Udaykumar, H. S.; Ndri, Narcisse; Francois, Marianne; Shyy, Wei

1999-01-01

Magnetically-coupled pump is under evaluation at Kennedy Space Center for possible cryogenic applications. A major concern is the impact of low temperature fluid flows on the pump performance. As a first step toward addressing this and related issues, a computational fluid dynamics and heat transfer tool has been adopted in a pump geometry. The computational tool includes (i) a commercial grid generator to handle multiple grid blocks and complicated geometric definitions, and (ii) an in-house computational fluid dynamics and heat transfer software developed in the Principal Investigator's group at the University of Florida. Both pure-conduction and combined convection-conduction computations have been conducted. A pure-conduction analysis gives insufficient information about the overall thermal distribution. Combined convection-conduction analysis indicates the significant influence of the coolant over the entire flow path. Since 2-D simulation is of limited help, future work on full 3-D modeling of the pump using multi-materials is needed. A comprehensive and accurate model can be developed to take into account the effect of multi-phase flow in the cooling flow loop, and the magnetic interactions.

Fabrication of setup for high temperature thermal conductivity measurement.

PubMed

Patel, Ashutosh; Pandey, Sudhir K

2017-01-01

In this work, we report the fabrication of an experimental setup for high temperature thermal conductivity (κ) measurement. It can characterize samples with various dimensions and shapes. Steady state based axial heat flow technique is used for κ measurement. Heat loss is measured using parallel thermal conductance technique. Simple design, lightweight, and small size sample holder is developed by using a thin heater and limited components. Low heat loss value is achieved by using very low thermal conductive insulator block with small cross-sectional area. Power delivered to the heater is measured accurately by using 4-wire technique and for this, the heater is developed with 4 wires. This setup is validated by using Bi 0.36 Sb 1.45 Te 3 , polycrystalline bismuth, gadolinium, and alumina samples. The data obtained for these samples are found to be in good agreement with the reported data. The maximum deviation of 6% in the value κ is observed. This maximum deviation is observed with the gadolinium sample. We also report the thermal conductivity of polycrystalline tellurium from 320 K to 550 K and the nonmonotonous behavior of κ with temperature is observed.

Sensitivity and Specificity of Cardiac Tissue Discrimination Using Fiber-Optics Confocal Microscopy.

PubMed

Huang, Chao; Sachse, Frank B; Hitchcock, Robert W; Kaza, Aditya K

2016-01-01

Disturbances of the cardiac conduction system constitute a major risk after surgical repair of complex cases of congenital heart disease. Intraoperative identification of the conduction system may reduce the incidence of these disturbances. We previously developed an approach to identify cardiac tissue types using fiber-optics confocal microscopy and extracellular fluorophores. Here, we applied this approach to investigate sensitivity and specificity of human and automated classification in discriminating images of atrial working myocardium and specialized tissue of the conduction system. Two-dimensional image sequences from atrial working myocardium and nodal tissue of isolated perfused rodent hearts were acquired using a fiber-optics confocal microscope (Leica FCM1000). We compared two methods for local application of extracellular fluorophores: topical via pipette and with a dye carrier. Eight blinded examiners evaluated 162 randomly selected images of atrial working myocardium (n = 81) and nodal tissue (n = 81). In addition, we evaluated the images using automated classification. Blinded examiners achieved a sensitivity and specificity of 99.2 ± 0.3% and 98.0 ± 0.7%, respectively, with the dye carrier method of dye application. Sensitivity and specificity was similar for dye application via a pipette (99.2 ± 0.3% and 94.0 ± 2.4%, respectively). Sensitivity and specificity for automated methods of tissue discrimination were similarly high. Human and automated classification achieved high sensitivity and specificity in discriminating atrial working myocardium and nodal tissue. We suggest that our findings facilitate clinical translation of fiber-optics confocal microscopy as an intraoperative imaging modality to reduce the incidence of conduction disturbances during surgical correction of congenital heart disease.

A Method of Retrospective Computerized System Validation for Drug Manufacturing Software Considering Modifications

NASA Astrophysics Data System (ADS)

Takahashi, Masakazu; Fukue, Yoshinori

This paper proposes a Retrospective Computerized System Validation (RCSV) method for Drug Manufacturing Software (DMSW) that relates to drug production considering software modification. Because DMSW that is used for quality management and facility control affects big impact to quality of drugs, regulatory agency required proofs of adequacy for DMSW's functions and performance based on developed documents and test results. Especially, the work that explains adequacy for previously developed DMSW based on existing documents and operational records is called RCSV. When modifying RCSV conducted DMSW, it was difficult to secure consistency between developed documents and test results for modified DMSW parts and existing documents and operational records for non-modified DMSW parts. This made conducting RCSV difficult. In this paper, we proposed (a) definition of documents architecture, (b) definition of descriptive items and levels in the documents, (c) management of design information using database, (d) exhaustive testing, and (e) integrated RCSV procedure. As a result, we could conduct adequate RCSV securing consistency.

Working memory dysfunctions predict social problem solving skills in schizophrenia.

PubMed

Huang, Jia; Tan, Shu-ping; Walsh, Sarah C; Spriggens, Lauren K; Neumann, David L; Shum, David H K; Chan, Raymond C K

2014-12-15

The current study aimed to examine the contribution of neurocognition and social cognition to components of social problem solving. Sixty-seven inpatients with schizophrenia and 31 healthy controls were administrated batteries of neurocognitive tests, emotion perception tests, and the Chinese Assessment of Interpersonal Problem Solving Skills (CAIPSS). MANOVAs were conducted to investigate the domains in which patients with schizophrenia showed impairments. Correlations were used to determine which impaired domains were associated with social problem solving, and multiple regression analyses were conducted to compare the relative contribution of neurocognitive and social cognitive functioning to components of social problem solving. Compared with healthy controls, patients with schizophrenia performed significantly worse in sustained attention, working memory, negative emotion, intention identification and all components of the CAIPSS. Specifically, sustained attention, working memory and negative emotion identification were found to correlate with social problem solving and 1-back accuracy significantly predicted the poor performance in social problem solving. Among the dysfunctions in schizophrenia, working memory contributed most to deficits in social problem solving in patients with schizophrenia. This finding provides support for targeting working memory in the development of future social problem solving rehabilitation interventions. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

The role of emergency physicians in the institutionalization of emergency medicine.

PubMed

van Schothorst, Jannine; van den Brand, Crispijn L; Gaakeer, Menno I; Wallenburg, Iris

2017-08-01

Emergency medicine is a fast-growing medical profession. Nevertheless, the clinical activities emergency physicians (EPs) carry out and the responsibilities they have differ considerably between hospitals. This article addresses the question how the role of EPs is shaped and institutionalized in the everyday context of acute care in hospitals. A cross-case ethnographic study was conducted, comprising observations, document analysis, and in-depth interviews in three emergency departments in the Netherlands. Drawing on the theoretical concept of institutional work, we show that managers, already established medical specialties, and EPs all conduct institutional work to enhance private interests, which both restricts and enlarges EPs' work domain. These actions are strategic and intentional, as well as unintentional and part of EPs' everyday work in acute care delivery. It is in this very process that tasks and responsibilities are redistributed and the role of the EP is shaped. In contemporary literature it is often argued that the role and status of EPs should be enhanced by strengthening regulation and improving training programs. This article shows that attention should also be paid to the more subtle everyday processes of role development.

[Development and Testing of the Taiwanese Hospital Nurses' Job Satisfaction Scale].

PubMed

Tzeng, Wen-Chii; Lin, Chiou-Fen; Lin, Lih-Ying; Lu, Meei-Shiow; Chiang, Li-Chi

2017-04-01

In the context of professional nursing, the concept of job satisfaction includes the degree to which a nurse is satisfied with the nursing profession, his/her personal adaptation to this profession, and his/her current working environment. No validated scale that addresses the job satisfaction of nurses working in hospitals currently exists in Taiwan. To develop a reliable and validated scale for measuring the job satisfaction of hospital nurses in Taiwan. A three-phase, cross-sectional study design was used. First, a literature review and expert focus group discussion were conducted to develop the initial scale items. Second, experts were invited to validate the content of the draft scale. Finally, convenience sampling was used to recruit 427 hospital nurses from 6 hospitals. These nurses completed the scale and the results were analyzed using item analysis, factor analysis, and internal consistency analysis. The 31-item Taiwanese hospital nurse job satisfaction scale developed in the present study addresses 5 factors, including supportive working environment, professional autonomy and growth, interpersonal interaction and collaboration, leadership style, and nursing workload. The overall Cronbach's α was .96. The results indicate that the developed scale provides good reliability and validity. This study confirms the validity and reliability of the developed scale. It may be used to measure the job satisfaction of nurses working in hospitals.

Interviewing clinicians and advocates who work with sexual assault survivors: a personal perspective on moving from quantitative to qualitative research methods.

PubMed

Ullman, Sarah E

2005-09-01

This article describes the author's personal experiences of conducting a qualitative semistructured interview study, after having done predominantly quantitative survey research in the social sciences. The author describes the process of learning how to approach conducting semistructured interviews with female advocates and clinicians who provide services to sexual assault survivors in the community. The author describes making the transition from a logical positivist deductive approach to thinking about and conducting research to a more social constructionist stance in which one learns from participants about their experiences and perspectives in narrative form to discover knowledge and develop theory inductively.

The use of multiple representations and visualizations in student learning of introductory physics: An example from work and energy

NASA Astrophysics Data System (ADS)

Zou, Xueli

In the past three decades, physics education research has primarily focused on student conceptual understanding; little work has been conducted to investigate student difficulties in problem solving. In cognitive science and psychology, however, extensive studies have explored the differences in problem solving between experts and naive students. A major finding indicates that experts often apply qualitative representations in problem solving, but that novices use an equation-centered method. This dissertation describes investigations into the use of multiple representations and visualizations in student understanding and problem solving with the concepts of work and energy. A multiple-representation strategy was developed to help students acquire expertise in solving work-energy problems. In this approach, a typical work-energy problem is considered as a physical process. The process is first described in words-the verbal representation of the process. Next, a sketch or a picture, called a pictorial representation, is used to represent the process. This is followed by work-energy bar charts-a physical representation of the same processes. Finally, this process is represented mathematically by using a generalized work-energy equation. In terms of the multiple representations, the goal of solving a work- energy problem is to represent the physical process the more intuitive pictorial and diagrammatic physical representations. Ongoing assessment of student learning indicates that this multiple-representation technique is more effective than standard instruction methods in student problem solving. visualize this difficult-to-understand concept, a guided- inquiry learning activity using a pair of model carts and an experiment problem using a sandbag were developed. Assessment results have shown that these research-based materials are effective in helping students visualize this concept and give a pictorial idea of ``where the kinetic energy goes'' during inelastic collisions. The research and curriculum development was conducted in the context of the introductory calculus-based physics course. Investigations were carried out using common physics education research tools, including open-ended surveys, written test questions, and individual student interviews.

Key Tasks of Science in Improving Effectiveness of Hard Coal Production in Poland

NASA Astrophysics Data System (ADS)

Dubiński, Józef; Prusek, Stanisław; Turek, Marian

2017-09-01

The article presents an array of specific issues regarding the employed technology and operational efficiency of mining activities, which could and should become the subject of conducted scientific research. Given the circumstances of strong market competition and increasing requirements concerning environmental conditions, both in terms of conducted mining activities and produced coal quality parameters, it is imperative to develop and implement innovative solutions regarding the employed production technology, the safety of work conducted under the conditions of increasing natural hazards, as well as the mining enterprise management systems that enable its effective functioning. The article content pertains to the last group of issues in the most detailed way, particularly in terms of the possibility for rational conducted operation cost reduction.

Tenure Track Investigator | Center for Cancer Research

Cancer.gov

This position, which is supported with stable financial resources, is the equivalent of Assistant Professor/Associate Professor in an academic department. The Thoracic and Gastrointestinal Oncology Branch (TGIB) is looking for a candidate who will complement our current group of principal investigators focused on thoracic and gastrointestinal (GI) cancers. The candidate is expected to develop a translational research program focused on GI cancers. As such, the candidate will conduct both laboratory-based investigations, as well as develop a clinical program related to work being conducted in his or her laboratory. We encourage outstanding physician scientists investigating any area of GI research to apply. Areas of interest include, but are not limited to, hepatobiliary and colon rectal cancer, and development of novel therapeutics. Candidates may be eligible to join the NCI Liver Cancer Program.

Thermal conductivity and emissivity measurements of uranium carbides

NASA Astrophysics Data System (ADS)

Corradetti, S.; Manzolaro, M.; Andrighetto, A.; Zanonato, P.; Tusseau-Nenez, S.

2015-10-01

Thermal conductivity and emissivity measurements on different types of uranium carbide are presented, in the context of the ActiLab Work Package in ENSAR, a project within the 7th Framework Program of the European Commission. Two specific techniques were used to carry out the measurements, both taking place in a laboratory dedicated to the research and development of materials for the SPES (Selective Production of Exotic Species) target. In the case of thermal conductivity, estimation of the dependence of this property on temperature was obtained using the inverse parameter estimation method, taking as a reference temperature and emissivity measurements. Emissivity at different temperatures was obtained for several types of uranium carbide using a dual frequency infrared pyrometer. Differences between the analyzed materials are discussed according to their compositional and microstructural properties. The obtainment of this type of information can help to carefully design materials to be capable of working under extreme conditions in next-generation ISOL (Isotope Separation On-Line) facilities for the generation of radioactive ion beams.

High pressure elasticity and thermal properties of depleted uranium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobsen, M. K., E-mail: mjacobsen@lanl.gov; Velisavljevic, N., E-mail: nenad@lanl.gov

2016-04-28

Studies of the phase diagram of uranium have revealed a wealth of high pressure and temperature phases. Under ambient conditions the crystal structure is well defined up to 100 gigapascals (GPa), but very little information on thermal conduction or elasticity is available over this same range. This work has applied ultrasonic interferometry to determine the elasticity, mechanical, and thermal properties of depleted uranium to 4.5 GPa. Results show general strengthening with applied load, including an overall increase in acoustic thermal conductivity. Further implications are discussed within. This work presents the first high pressure studies of the elasticity and thermal properties ofmore » depleted uranium metal and the first real-world application of a previously developed containment system for making such measurements.« less

High pressure elasticity and thermal properties of depleted uranium

DOE PAGES

Jacobsen, M. K.; Velisavljevic, N.

2016-04-28

Studies of the phase diagram of uranium have revealed a wealth of high pressure and temperature phases. Under ambient conditions the crystal structure is well defined up to 100 gigapascals (GPa), but very little information on thermal conduction or elasticity is available over this same range. This work has applied ultrasonic interferometry to determine the elasticity, mechanical, and thermal properties of depleted uranium to 4.5 GPa. Results show general strengthening with applied load, including an overall increase in acoustic thermal conductivity. Further implications are discussed within. Lastly, this work presents the first high pressure studies of the elasticity and thermalmore » properties of depleted uranium metal and the first real-world application of a previously developed containment system for making such measurements.« less

Professional tears: developing emotional intelligence around death and dying in emergency work.

PubMed

Bailey, Cara; Murphy, Roger; Porock, Davina

2011-12-01

This paper explores how emergency nurses manage the emotional impact of death and dying in emergency work and presents a model for developing expertise in end-of-life care delivery. Care of the dying, the deceased and the bereaved is largely conducted by nurses and nowhere is this more demanding than at the front door of the hospital, the Emergency Department. Whilst some nurses find end-of-life care a rewarding aspect of their role, others avoid opportunities to develop a relationship with the dying and bereaved because of the intense and exhausting nature of the associated emotional labour. Qualitative study using unstructured observations of practice and semistructured interviews. Observation was conducted in a large Emergency Department over 12 months. We also conducted 28 in-depth interviews with emergency staff, patients with terminal illnesses and their relatives. Emergency nurses develop expertise in end-of-life care giving by progressing through three stages of development: (1) investment of the self in the nurse-patient relationship, (2) management of emotional labour and (3) development of emotional intelligence. Barriers that prevent the transition to expertise contribute to occupational stress and can lead to burnout and withdrawal from practice. Despite the emotional impact of emergency deaths, nurses who invest their therapeutic self into the nurse-patient relationship are able to manage the emotional labour of caring for the dying and their relatives through the development of emotional intelligence. They find reward in end-of-life care that ultimately creates a more positive experience for patients and their relatives. The emergency nurse caring for the dying patient is placed in a unique and privileged position to make a considerable impact on the care of the patient and the experience for their family. This model can build awareness in managing the emotive aspects involved in care delivery and develop fundamental skills of nursing patients near the end of life. © 2011 Blackwell Publishing Ltd.

Large Scale Laser Crystallization of Solution-based Alumina-doped Zinc Oxide (AZO) Nanoinks for Highly Transparent Conductive Electrode

PubMed Central

Nian, Qiong; Callahan, Michael; Saei, Mojib; Look, David; Efstathiadis, Harry; Bailey, John; Cheng, Gary J.

2015-01-01

A new method combining aqueous solution printing with UV Laser crystallization (UVLC) and post annealing is developed to deposit highly transparent and conductive Aluminum doped Zinc Oxide (AZO) films. This technique is able to rapidly produce large area AZO films with better structural and optoelectronic properties than most high vacuum deposition, suggesting a potential large-scale manufacturing technique. The optoelectronic performance improvement attributes to UVLC and forming gas annealing (FMG) induced grain boundary density decrease and electron traps passivation at grain boundaries. The physical model and computational simulation developed in this work could be applied to thermal treatment of many other metal oxide films. PMID:26515670

The role of patent and non-patent databases in patent research in universities

NASA Astrophysics Data System (ADS)

Tolstaya, A. M.; Suslina, I. V.; Tolstaya, P. M.

2017-01-01

This studies deal with the description and systematization of the popular patent retrieval resources. The importance of the non-patent information when conducting patent research for the intellectual property created in educational and scientific activity of the university is highlighted. The differences in the patent and non-patent information are found out. Based on the databases` analysis the authors conducted the patent research on "Wireless endoscopic capsules" (development of the NRNU MEPhI). This study can be used to facilitate the university work on the new product development in order to improve the efficiency of the process of the commercialization of the intellectual activity results, including the entering the international market.

Two-dimensional model of a Space Station Freedom thermal energy storage canister

NASA Astrophysics Data System (ADS)

Kerslake, Thomas W.; Ibrahim, Mounir B.

1990-08-01

The Solar Dynamic Power Module being developed for Space Station Freedom uses a eutectic mixture of LiF-CaF2 phase change salt contained in toroidal canisters for thermal energy storage. Results are presented from heat transfer analyses of the phase change salt containment canister. A 2-D, axisymmetric finite difference computer program which models the canister walls, salt, void, and heat engine working fluid coolant was developed. Analyses included effects of conduction in canister walls and solid salt, conduction and free convection in liquid salt, conduction and radiation across salt vapor filled void regions and forced convection in the heat engine working fluid. Void shape, location, growth or shrinkage (due to density difference between the solid and liquid salt phases) were prescribed based on engineering judgement. The salt phase change process was modeled using the enthalpy method. Discussion of results focuses on the role of free-convection in the liquid salt on canister heat transfer performance. This role is shown to be important for interpreting the relationship between ground based canister performance (in l-g) and expected on-orbit performance (in micro-g). Attention is also focused on the influence of void heat transfer on canister wall temperature distributions. The large thermal resistance of void regions is shown to accentuate canister hot spots and temperature gradients.

Two-dimensional model of a Space Station Freedom thermal energy storage canister

NASA Astrophysics Data System (ADS)

Kerslake, Thomas W.; Ibrahim, Mounir B.

The Solar Dynamic Power Module being developed for Space Station Freedom uses a eutectic mixture of LiF-CaF2 phase change salt contained in toroidal canisters for thermal energy storage. Results are presented from heat transfer analyses of the phase-change salt containment canister. A 2-D, axisymmetric finite-difference computer program which models the canister walls, salt, void, and heat engine working fluid coolant was developed. Analyses included effects of conduction in canister walls and solid salt, conduction and free convection in liquid salt, conduction and radiation across salt vapor filled void regions, and forced convection in the heat engine working fluid. Void shape, location, and growth or shrinkage (due to density difference between the solid and liquid salt phases) were prescribed based on engineering judgement. The salt phase change process was modeled using the enthalpy method. Discussion of results focuses on the role of free-convection in the liquid salt on canister heat transfer performance. This role is shown to be important for interpreting the relationship between groundbased canister performance (in 1-g) and expected on-orbit performance (in micro-g). Attention is also focused on the influence of void heat transfer on canister wall temperature distributions. The large thermal resistance of void regions is shown to accentuate canister hot spots and temperature gradients.

Two-dimensional model of a Space Station Freedom thermal energy storage canister

NASA Technical Reports Server (NTRS)

Kerslake, Thomas W.; Ibrahim, Mounir B.

1990-01-01

The Solar Dynamic Power Module being developed for Space Station Freedom uses a eutectic mixture of LiF-CaF2 phase change salt contained in toroidal canisters for thermal energy storage. Results are presented from heat transfer analyses of the phase-change salt containment canister. A 2-D, axisymmetric finite-difference computer program which models the canister walls, salt, void, and heat engine working fluid coolant was developed. Analyses included effects of conduction in canister walls and solid salt, conduction and free convection in liquid salt, conduction and radiation across salt vapor filled void regions, and forced convection in the heat engine working fluid. Void shape, location, and growth or shrinkage (due to density difference between the solid and liquid salt phases) were prescribed based on engineering judgement. The salt phase change process was modeled using the enthalpy method. Discussion of results focuses on the role of free-convection in the liquid salt on canister heat transfer performance. This role is shown to be important for interpreting the relationship between groundbased canister performance (in 1-g) and expected on-orbit performance (in micro-g). Attention is also focused on the influence of void heat transfer on canister wall temperature distributions. The large thermal resistance of void regions is shown to accentuate canister hot spots and temperature gradients.

Two-dimensional model of a Space Station Freedom thermal energy storage canister

NASA Technical Reports Server (NTRS)

Kerslake, Thomas W.; Ibrahim, Mounir B.

1990-01-01

The Solar Dynamic Power Module being developed for Space Station Freedom uses a eutectic mixture of LiF-CaF2 phase change salt contained in toroidal canisters for thermal energy storage. Results are presented from heat transfer analyses of the phase change salt containment canister. A 2-D, axisymmetric finite difference computer program which models the canister walls, salt, void, and heat engine working fluid coolant was developed. Analyses included effects of conduction in canister walls and solid salt, conduction and free convection in liquid salt, conduction and radiation across salt vapor filled void regions and forced convection in the heat engine working fluid. Void shape, location, growth or shrinkage (due to density difference between the solid and liquid salt phases) were prescribed based on engineering judgement. The salt phase change process was modeled using the enthalpy method. Discussion of results focuses on the role of free-convection in the liquid salt on canister heat transfer performance. This role is shown to be important for interpreting the relationship between ground based canister performance (in l-g) and expected on-orbit performance (in micro-g). Attention is also focused on the influence of void heat transfer on canister wall temperature distributions. The large thermal resistance of void regions is shown to accentuate canister hot spots and temperature gradients.

Space Solar Power Technical Interchange Meeting 2: SSP TIM 2

NASA Technical Reports Server (NTRS)

Sanders, Jim; Hawk, Clark W.

1998-01-01

The 2nd Space Solar Power Technical Interchange Meeting (SSP TIM 2) was conducted September 21st through 24th with the first part consisting of a Plenary session. The summary results of this Plenary session are contained in part one of this report. The attendees were then organized into Working Breakout Sessions and Integrated Product Team (IPT) Sessions for the purpose of conducting in-depth discussions in specific topic areas and developing a consensus as to appropriate study plans and actions to be taken. The Second part covers the Plenary Summary Session, which contains the summary results of the Working Breakout Sessions and IPT Sessions. The appendix contains the list of attendees. The ob'jective was to provide an update for the study teams and develop plans for subsequent study activities. This SSP TIM 2 was initiated and the results reported electronically over the Internet. The International Space Station (ISS) could provide the following opportunities for conducting research and technology (R&T) which are applicable to SSP: (1) Automation and Robotics, (2) Advanced Power Generation, (3) Advanced Power Management & Distribution (PMAD), (4) Communications Systems and Networks, (5) Energy Storage, (6) In Space Propulsion (ISP), (7) Structural Dynamics and Control, and Assembly and (8) Wireless Power Transmission.

Automated Chat Thread Analysis: Untangling the Web

DTIC Science & Technology

2010-01-01

delays, distractions, errant information sources, and overall cognitive effort. The most significant challenge to conducting an effective after...to emphasize. Thus, the goal is to develop a tool that serves as a cognitive aid to instructors developing an After-Action Review (AAR). Our...work is being done by the “ Cognitive Agent that Learns and Organizes” (CALO) project, a joint effort between SRI and Stanford University’s Center for

ECN-15662

NASA Image and Video Library

1981-05-21

The Dryden C-140 JetStar during testing of advanced propfan designs. Dryden conducted flight research in 1981-1982 on several designs. The technology was developed under the direction of the Lewis Research Center (today the Glenn Research Center, Cleveland, OH) under the Advanced Turboprop Program. Under that program, Langley Research Center in Virginia oversaw work on accoustics and noise reduction. These efforts were intended to develop a high-speed and fuel-efficient turboprop system.

Ergonomics: A Commonsense Activity That Can Save Schools Money.

ERIC Educational Resources Information Center

Fleer, Paul; Gauthier-Green, Erin

2002-01-01

Describes the use of ergonomics to reduce work-related musculoskeletal disorders such as back pain, tendonitis, and carpal tunnel syndrome. Describes ergonomics and how to identify ergonomic problems, conduct a job hazard analysis, and develop solutions. Also lists common ergonomic errors in schools. Provides an ergonomic checklist for employees…

Interdisciplinary Cooperative Education Programs. Curriculum Guide.

ERIC Educational Resources Information Center

District of Columbia Public Schools, Washington, DC. Dept. of Career Development.

Eight units of study make up this senior high school Interdisciplinary Cooperative Education Program (ICEP) curriculum designed (1) to assist seniors in learning and developing the skills, knowledge, personal traits, health habits, work habits, safety habits, pride in achievement, and modes of conduct necessary for success; and (2) to assist them…

Defense Experimentation and Stockpile Stewardship

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2014-10-28

A primary mission of the site is to help ensure that the nation's nuclear weapon stockpile remains safe, secure and reliable. The stockpile stewardship program, working with the national weapons laboratories conducts a wide range of experiments using advanced diagnostic technologies, many of which were developed right here at the NNSS.

Responsible Student Affairs Practice: Merging Student Development and Quality Management.

ERIC Educational Resources Information Center

Whitner, Phillip A.; And Others

The merging of Total Quality Management (TQM) and Involvement Theory into a managerial philosophy can assist student affairs professionals with an approach for conducting work that improves student affairs practice. When merged or integrated, accountability can easily be obtained because the base philosophies of qualitative research, TQM, and…

Gulf of Mexico Hypoxia Research Program Data Report 2002-2007

EPA Science Inventory

The work described in this report summarizes the data collected during 12 oceanographic cruises conducted from 2002-2007. The project was supported by the US EPA Office of Research and Development, in partnership with the US EPA Gulf of Mexico Program Office, the Office of Water,...

Police Selection and Career Assessment.

ERIC Educational Resources Information Center

Dunnette, Marvin D.; Motowidlo, Stephan J.

Research was conducted to develop the Police Career Index (PCI) and the regional assessment center exercises to provide a total personnel evaluation system to help police departments screen applicants, evaluate on-the-job performance of officers eligible for promotion, and gauge a person's suitability for police work. The PCI is based on actual…

Designing Innovative Counseling Courses: Combining Technology, Theory, and Practice

ERIC Educational Resources Information Center

Cicco, Gina

2012-01-01

This article will discuss the development of an innovative instructional design for teaching graduate courses in counselor education programs. The teaching strategies that will be highlighted evolved during a collaborative team-teaching project conducted by two counselor educators. These two faculty members worked together to redesign a course in…

Rapid Prototyping Methodology in Action: A Developmental Study.

ERIC Educational Resources Information Center

Jones, Toni Stokes; Richey, Rita C.

2000-01-01

Investigated the use of rapid prototyping methodologies in two projects conducted in a natural work setting to determine the nature of its use by designers and customers and the extent to which its use enhances traditional instructional design. Discusses design and development cycle-time reduction, product quality, and customer and designer…

An Applied Project-Driven Approach to Undergraduate Research Experiences

ERIC Educational Resources Information Center

Karls, Michael A.

2017-01-01

In this paper I will outline the process I have developed for conducting applied mathematics research with undergraduates and give some examples of the projects we have worked on. Several of these projects have led to refereed publications that could be used to illustrate topics taught in the undergraduate curriculum.

The Mentor-Youth Alliance: The Role of Mentoring Relationships in Promoting Youth Competence

ERIC Educational Resources Information Center

Zand, Debra H.; Thomson, Nicole; Cervantes, Richard; Espiritu, Rachele; Klagholz, Donna; LaBlanc, Laura; Taylor, Andrea

2009-01-01

Mentoring programs hold great promise for fostering competency in disadvantaged youth. Although considerable theoretical work has been conducted to explain the role of mentoring relationships in promoting positive youth outcomes, very little empirical research has directly investigated this alliance. The present study developed and validated a…

Faculty as Learners: Developing Thinking Communities

ERIC Educational Resources Information Center

Eddy, Pamela L.; Garza Mitchell, Regina L.

2012-01-01

The shifting demographics of faculty ranks, expansion of faculty work, and the expectations of accountability and revenue production place new demands on today's faculty. Collaborating with other faculty members is one option for easing workload demands and reinvigorating faculty members in the conduct of their teaching and research. In this…

Defense Experimentation and Stockpile Stewardship

ScienceCinema

None

2018-01-16

A primary mission of the site is to help ensure that the nation's nuclear weapon stockpile remains safe, secure and reliable. The stockpile stewardship program, working with the national weapons laboratories conducts a wide range of experiments using advanced diagnostic technologies, many of which were developed right here at the NNSS.

Vocational Training for Advanced Technology in Hong Kong. Monograph No. 6.

ERIC Educational Resources Information Center

Hong, Ng Sek

Case studies were conducted in industrial enterprises of varying sizes and a university library in Hong Kong that have introduced advanced technology. The studies investigated the management of technological change, vocational training, and human resources development at the workplace, as well as the repercussions on work attitudes, the…

Students' Problem Solving Approaches for Developing Geologic Models in the Field

ERIC Educational Resources Information Center

Balliet, Russell N.; Riggs, Eric M.; Maltese, Adam V.

2015-01-01

Understanding how geologists conduct fieldwork through analysis of problem solving has significant potential impact on field instruction methods within geology and other science fields. Recent work has highlighted many aspects of fieldwork, but the problem solving behaviors displayed by geologists during fieldwork and the associated cognitive…

Scale of Academic Emotion in Science Education: Development and Validation

ERIC Educational Resources Information Center

Chiang, Wen-Wei; Liu, Chia-Ju

2014-01-01

Contemporary research into science education has generally been conducted from the perspective of "conceptual change" in learning. This study sought to extend previous work by recognizing that human rationality can be influenced by the emotions generated by the learning environment and specific actions related to learning. Methods used…

What Works in Enhancing HRD Effectiveness?

ERIC Educational Resources Information Center

Wognum, Ida

A study was conducted to determine what factors of human resource development (HRD) or other learning interventions impede or enhance improved performance. A review of the literature suggested theories of HRD effectiveness, where HRD effectiveness is perceived as the extent to which HRD goals and objectives are achieved. Various authors state that…

Buildings for Education, Vol. 2, No. 2.

ERIC Educational Resources Information Center

Asian Regional Inst. for School Building Research, Colombo (Sri Lanka).

The activities of the Asian Regional Institute for School Building Research are described (studies conducted, contracts, development group work). Technical notes are presented concerning high-rise school buildings in Asian urban areas and related cost implications; the following factors are considered--(1) demand for space in urban areas, (2)…

Information Architecture for Bilingual Web Sites.

ERIC Educational Resources Information Center

Cunliffe, Daniel; Jones, Helen; Jarvis, Melanie; Egan, Kevin; Huws, Rhian; Munro, Sian

2002-01-01

Discusses creating an information architecture for a bilingual Web site and reports work in progress on the development of a content-based bilingual Web site to facilitate shared resources between speech and language therapists. Considers a structural analysis of existing bilingual Web designs and explains a card-sorting activity conducted with…