A time for change: an exploration of attitudes toward part-time work in academia among women internists and their division chiefs.

PubMed

Harrison, Rebecca A; Gregg, Jessica L

2009-01-01

Increasing numbers of clinicians desire part-time work, and many will opt out of academic medicine if the barriers to part-time work are too great. Purposeful sampling was used to investigate the experiences of part-time academic physicians and their division leaders to understand (1) how each identified the negative and positive consequences of part-time work, and (2) how each conceptualize part-time work. In 2004, the authors interviewed the Society of General Medicine Horn Scholars Program applicants and their division chiefs from the 2001 and 2004 award cycles and performed a qualitative analysis of the one- to two-hour audiotaped interviews. Seven out of nine eligible applicants and six of seven division chiefs participated. All applicants were female junior faculty clinician educators in academic internal medicine from seven institutions. All division chiefs were male full-time faculty members. Both applicants and division chiefs identified multiple specific negative and positive consequences of part-time work. Analysis of interviews suggested that both groups tended to frame part-time work as a decision to "work less" or to "work differently." Self-reflection and articulation of values helped some faculty determine where they derive the greatest happiness and fulfillment personally and professionally. As more academics seek work-life balance and consider part-time work as a tool to achieve that balance, academic medicine will be challenged to develop creative models for integrating successful part-time physicians, or it will lose that segment of the workforce. This study's findings suggest that one such model may require that physicians and their leaders reconceptualize work altogether.

Equity and Quality? Challenges for Early Childhood and Primary Education in Ethiopia, India and Peru. Working Papers in Early Childhood Development, No. 55. Studies in Early Childhood Transitions

ERIC Educational Resources Information Center

Woodhead, Martin; Ames, Patricia; Vennam, Uma; Abebe, Workneh; Streuli, Natalia

2009-01-01

Part of the "Studies in Early Transitions" series, this Working Paper draws on interviews and observations carried out as part of "Young Lives", a 15-year longitudinal study of childhood poverty in Ethiopia, India, Peru and Vietnam based at the University of Oxford's Department of International Development. This paper focuses…

SOCIAL PSYCHOLOGICAL RESEARCH IN DEVELOPING COUNTRIES,

DTIC Science & Technology

development. Part 3 is concerned with problems of education and the diffusion of knowledge , and Part 4 is a record of the discussions and working groups in which interaction was informal and the issues were explored in depth. (Author)

The Dynamic between Work Values and Part-Time Work Experiences across the High School Years

ERIC Educational Resources Information Center

Porfeli, Erik J.

2008-01-01

The work value system, its development, and its relationship with work experiences can be modeled as an adaptive control system [Ford, D. H., & Lerner, R. M. (1992). "Developmental systems theory: An integrative approach". Newbury Park, CA: Sage Publications]. This study employed longitudinal data from 1000 participants (Youth Development Study;…

A model of ergonomics intervention in industry: case study in Japan.

PubMed

Chavalitsakulchai, P; Ohkubo, T; Shahnavaz, H

1994-06-01

This paper presents the results of an ergonomics survey in four different Japanese work places. The survey consisted of two parts. In the first part, the physical and psycho-social problems of the female workers were investigated. Questionnaire techniques were used to assess musculoskeletal disorders in various parts of the body and of psycho-social stress at work as well as in the daily life situation. Furthermore, work posture analysis, task analysis, simple clinical tests and flexibility tests were conducted. In the second part, the ergonomics intervention practices in different types of Japanese work places were examined. Three different questionnaires were developed and used to collect information from representatives of employees, management and responsible governmental agents of the Department of Industrial Safety and Health, Ministry of Labor, with regard to ergonomic interventions at work places. Management, employees, and government representatives expressed desire for cooperation and participation for arrangement of the ergonomics intervention program. A model for appropriate ergonomics intervention in industry is developed with regard to physical and psycho-social problems at work. Factors influencing worker participation and the establishment of a dynamic system of ergonomics intervention at work places are discussed. Practical ways for improving the working conditions of female workers are: (i) cooperation between managers, workers, and government officers is regarded as vital for the ergonomics intervention program, (ii) worker participation, (iii) appropriate training course with regard to ergonomics education, and (iv) managerial support.

Collaboration Handbook: Creating, Sustaining, and Enjoying the Journey.

ERIC Educational Resources Information Center

Winer, Michael; Ray, Karen

This book provides activities and examples for learning about creating, sustaining, and enjoying new ways of working together. The book helps to develop a new language to deal with complicated situations on the journey to collaboration. The book is divided into four parts. Part 1, "How Do We Begin?" shares a story to develop the scenario. Part 2,…

Coping in the World of Work. Practice in Problem Solving. Instructor's Handbook. Research and Development Series 120A.

ERIC Educational Resources Information Center

Campbell, Robert E.; And Others

This instructor's handbook is part of a career development unit on coping in the world of work, designed to assist students in developing coping strategies to deal with work-entry and job adjustment problems. (Other components of the unit--student guide, handout/transparency masters, and filmstrip/sound cassette programs--are available…

United Space Alliance, LLC Windchill As-Built Highlights

NASA Technical Reports Server (NTRS)

Richmond, Dena M.

2011-01-01

Work Order execution data from Solumina As Worked BOM (As-Built) in Solumina (Slide 2) sent to Windchill Windchill receives As Worked BOM data and 'marries' the Solumina execution data to the Part Instance/Product Structure/As-Design (Slide 3 As-Design and Slide 4 &5 As-Built) Manage the As-Built to As-Design delta's via the interface and Part Instance Attributes (Slide 6) including Work Order data and any CMcomments Produce an As-Built to As-Design report that also includes all Part Instance Attribute data (no screenshot as this is still in development) Utilize Windchill and Solumina 'Out of the Box' functionality

45 CFR Appendix E to Part 74 - Principles for Determining Costs Applicable to Research and Development Under Grants and...

Code of Federal Regulations, 2013 CFR

2013-10-01

... Research and Development Under Grants and Contracts With Hospitals E Appendix E to Part 74 Public Welfare... Research and Development Under Grants and Contracts With Hospitals i. purpose and scope A. Objectives. This appendix provides principles for determining the costs applicable to research and development work...

45 CFR Appendix E to Part 74 - Principles for Determining Costs Applicable to Research and Development Under Grants and...

Code of Federal Regulations, 2011 CFR

2011-10-01

... Research and Development Under Grants and Contracts With Hospitals E Appendix E to Part 74 Public Welfare... Research and Development Under Grants and Contracts With Hospitals i. purpose and scope A. Objectives. This appendix provides principles for determining the costs applicable to research and development work...

45 CFR Appendix E to Part 74 - Principles for Determining Costs Applicable to Research and Development Under Grants and...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Research and Development Under Grants and Contracts With Hospitals E Appendix E to Part 74 Public Welfare... Research and Development Under Grants and Contracts With Hospitals i. purpose and scope A. Objectives. This appendix provides principles for determining the costs applicable to research and development work...

45 CFR Appendix E to Part 74 - Principles for Determining Costs Applicable to Research and Development Under Grants and...

Code of Federal Regulations, 2014 CFR

2014-10-01

... Research and Development Under Grants and Contracts With Hospitals E Appendix E to Part 74 Public Welfare... Research and Development Under Grants and Contracts With Hospitals i. purpose and scope A. Objectives. This appendix provides principles for determining the costs applicable to research and development work...

45 CFR Appendix E to Part 74 - Principles for Determining Costs Applicable to Research and Development Under Grants and...

Code of Federal Regulations, 2012 CFR

2012-10-01

... Research and Development Under Grants and Contracts With Hospitals E Appendix E to Part 74 Public Welfare... Research and Development Under Grants and Contracts With Hospitals i. purpose and scope A. Objectives. This appendix provides principles for determining the costs applicable to research and development work...

Web-GIS based information management system to Bureau of Law Enforcement for Urban Managementenforcement for urban management

NASA Astrophysics Data System (ADS)

Sun, Hai; Wang, Cheng; Ren, Bo

2007-06-01

Daily works of Law Enforcement Bureau are crucial in the urban management. However, with the development of the city, the information and data which are relative to Law Enforcement Bureau's daily work are increasing and updating. The increasing data result in that some traditional work is limited and inefficient in daily work. Analyzing the demands and obstacles of Law Enforcement Bureau, the paper proposes a new method to solve these problems. A web-GIS based information management system was produced for Bureau of Law Enforcement for Urban Management of Foshan. First part of the paper provides an overview of the system. Second part introduces the architecture of system and data organization. In the third part, the paper describes the design and implement of functional modules detailedly. In the end, this paper is concluded and proposes some strategic recommendations for the further development of the system. This paper focuses on the architecture and implementation of the system, solves the developing issues based on ArcServer, and introduces a new concept to the local government to solve the current problems. Practical application of this system showed that it played very important role in the Law Enforcement Bureau's work.

The History and Distribution of Indigenous Languages of Bolivia.

ERIC Educational Resources Information Center

Key, Mary Ritchie

This paper about the history and distribution of indigenous languages of Bolivia is divided into two parts. The first part deals with: (1) the developments of comparative work in South American Indian languages, (2) the phonological problems of comparative work in recently written languages, and (3) the apparent conflicts when dealing with early…

Part-time employment in Jordan as a nursing policy solution.

PubMed

Al-Motlaq, M; Azar, N; Squires, A

2017-03-01

Explore the potential of a part-time work option for nurses as a strategy for managing domestic markets in Jordan by examining perceptions of working nurses and nursing students in the context of current social and cultural variables. Unemployment among Jordanian nurses has become a reality in recent years. However, labor markets literature in nursing rarely studies what kind of policy responses should occur during a surplus of nurses. A cross-sectional design structured the study. The perceptions of nurses and students were measured through a questionnaire developed specifically for the purpose of this exploratory study. Both nurses (n = 51) and students (n = 56) supported the introduction of the new suggested part-time option. However, students were more willing to start working or transfer into part-time work, take payment on hourly basis, and support colleagues to transfer into part-time work. Different solutions were also suggested by participants. The results were useful for providing the foundational data to further study the viability of a part-time work option for Jordanian nurses. The results show how optimistic current and future Jordanian nurses are regarding this employment option. For countries that may need to diversify their employment models due to excess supply of nurses and to address gender imbalances, this work may help inform policy development. Both employed and unemployed nurses will benefit if health care managers consider its application. The flexibility of this option may help improve the quality of life of many nurses. The results of this study provide nursing leaders and managers with foundational evidence that may be applicable in the Jordanian health sector. Although further studies are recommended, nursing leaders and policy makers should consider such a solution. © 2016 International Council of Nurses.

Making Professional Development Schools Work: Politics, Practice, and Policy. The Series on School Reform.

ERIC Educational Resources Information Center

Levine, Marsha, Ed.; Trachtman, Roberta, Ed.

The 11 chapters in this book are organized into 3 parts. "Part 1: Making Changes at the Core" contains five chapters: (1) "Learning To Teach in Professional Development Schools" (Kenneth Zeichner and Maurine Miller); (2) "'Making It Happen': Creating a Subculture of Mentoring in a Professional Development School"…

Guidelines for Design and Analysis of Large, Brittle Spacecraft Components

NASA Technical Reports Server (NTRS)

Robinson, E. Y.

1993-01-01

There were two related parts to this work. The first, conducted at The Aerospace Corporation was to develop and define methods for integrating the statistical theory of brittle strength with conventional finite element stress analysis, and to carry out a limited laboratory test program to illustrate the methods. The second part, separately funded at Aerojet Electronic Systems Division, was to create the finite element postprocessing program for integrating the statistical strength analysis with the structural analysis. The second part was monitored by Capt. Jeff McCann of USAF/SMC, as Special Study No.11, which authorized Aerojet to support Aerospace on this work requested by NASA. This second part is documented in Appendix A. The activity at Aerojet was guided by the Aerospace methods developed in the first part of this work. This joint work of Aerospace and Aerojet stemmed from prior related work for the Defense Support Program (DSP) Program Office, to qualify the DSP sensor main mirror and corrector lens for flight as part of a shuttle payload. These large brittle components of the DSP sensor are provided by Aerojet. This document defines rational methods for addressing the structural integrity and safety of large, brittle, payload components, which have low and variable tensile strength and can suddenly break or shatter. The methods are applicable to the evaluation and validation of such components, which, because of size and configuration restrictions, cannot be validated by direct proof test.

Coping in the World of Work. Practice in Problem Solving. Masters, Handouts and Transparencies. Research and Development Series No. 120C.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational Education.

Master handouts and transparencies needed for activities and instruction are contained in this document, which is part of a career development unit on coping in the world of work designed to assist students in developing coping strategies to deal with work entry and job adjustment problems. (Other components of the unit--instructor's handbook,…

Learning and the Part-Time Worker.

ERIC Educational Resources Information Center

Tisdall, Caroline

1999-01-01

Part-time workers, who are primarily female, are not well served by staff development and training models that reflect values and assumptions of traditional working patterns. Part-timers face such training barriers as management attitudes, lack of time and resources, and inflexibility. (SK)

Group attributional training as an effective approach to human resource development under team work systems.

PubMed

Wang, Z M

1994-07-01

An experimental programme of group attributional training under team work system was conducted as part of human resource development in Chinese industrial enterprises. One hundred and ten shopfloor employees participated in the study. Among them, 58 employees took part in the factorial-designed experiment to find out the effects of attributions on performance, and 52 employees of ten work groups participated in the group attributional training programme twice a week for two months. The results showed that the group attributional training was effective in modifying employees' attributional patterns and enhancing group performance and satisfaction. On the basis of the results, an attributional model of work motivation is proposed, and its theoretical and practical implications for human resource management discussed.

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 2-Domino Hazard Index and case study.

PubMed

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-12-15

The design of layout plans requires adequate assessment tools for the quantification of safety performance. The general focus of the present work is to introduce an inherent safety perspective at different points of the layout design process. In particular, index approaches for safety assessment and decision-making in the early stages of layout design are developed and discussed in this two-part contribution. Part 1 (accompanying paper) of the current work presents an integrated index approach for safety assessment of early plant layout. In the present paper (Part 2), an index for evaluation of the hazard related to the potential of domino effects is developed. The index considers the actual consequences of possible escalation scenarios and scores or ranks the subsequent accident propagation potential. The effects of inherent and passive protection measures are also assessed. The result is a rapid quantification of domino hazard potential that can provide substantial support for choices in the early stages of layout design. Additionally, a case study concerning selection among various layout options is presented and analyzed. The case study demonstrates the use and applicability of the indices developed in both parts of the current work and highlights the value of introducing inherent safety features early in layout design.

Counselor's Handbook: I, Counselor's Interviewing Guides in Individual Appraisal; II, Counselee Appraisal Patterns Related to Fields of Work.

ERIC Educational Resources Information Center

Bureau of Employment Security (DOL), Washington, DC.

Part I includes guides for appraising individual characteristics such as interests, temperament, educational development, and aptitudes, to help the counselee learn about himself. Part II includes guidelines for appraising individual characteristics as they relate to the 18 fields of work (occupational clusters) which help the counselee learn…

Critiquing Teacher Professional Development: Teacher Learning within the Field of Teachers' Work

ERIC Educational Resources Information Center

Hardy, Ian

2010-01-01

This study is an empirical account of the professional development (PD) practices that constituted part of the work of a group of teachers and school-based administrators working together in a cluster of six schools in southeast Queensland, Australia, during a period of intense educational reform. The data comprise meeting transcripts and…

The Role of Teacher Work Samples in Developing Effective and Reflective Physical Education Teachers

ERIC Educational Resources Information Center

Sutherland, Sue; Goodway, Jackie

2010-01-01

For eight years, Ohio State University (OSU) has systematically infused teacher work samples (TWS) into their physical education teacher education (PETE) undergraduate curriculum in order to develop effective and reflective teachers. Teacher work samples are made up of five main parts: (1) community mapping, (2) unit planning, (3) data collection…

Pedagogy and Diversity: Enrichment and Support for Social Work Instructors Engaged in Social Justice Education

ERIC Educational Resources Information Center

Garran, Ann Marie; Kang, Hye-Kyung; Fraser, Edith

2014-01-01

The primary purpose of faculty development is to create and sustain a culture of teaching excellence. For social work faculty, an important part of teaching excellence involves incorporating core social work values such as social justice and diversity across the curriculum and developing pedagogical skills and strategies to teach these issues…

Advances in Work Organisation.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

A 1973 international management seminar, sponsored by the Organization for Economic Cooperation and Development, provided an opportunity for representatives from various countries to share innovations in work organization. It appears that attitudes toward work and working life are changing throughout the industrialized world; part of the dilemma…

Collaborative Reform and Other Improbable Dreams: The Challenges of Professional Development Schools. SUNY Series, Teacher Preparation and Development.

ERIC Educational Resources Information Center

Johnston, Marilyn, Ed.; Brosnan, Patti, Ed.; Cramer, Don, Ed.; Dove, Tim, Ed.

This collection of papers examines a 10-year process of teacher education reform at Ohio State University, describing 13 Professional Development Schools (PDSs). After "Introduction: Context, Challenges, and Consequences: PDSs in the Making" (Marilyn Johnston), there are 16 papers in four parts. Part 1, "Contextualizing PDS Work and…

Part-time and full-time medical specialists, are there differences in allocation of time?

PubMed

de Jong, Judith D; Heiligers, Phil; Groenewegen, Peter P; Hingstman, Lammert

2006-03-03

An increasing number of medical specialists prefer to work part-time. This development can be found worldwide. Problems to be faced in the realization of part-time work in medicine include the division of night and weekend shifts, as well as communication between physicians and continuity of care. People tend to think that physicians working part-time are less devoted to their work, implying that full-time physicians complete a greater number of tasks. The central question in this article is whether part-time medical specialists allocate their time differently to their tasks than full-time medical specialists. A questionnaire was sent by mail to all internists (N = 817), surgeons (N = 693) and radiologists (N = 621) working in general hospitals in the Netherlands. Questions were asked about the actual situation, such as hours worked and night and weekend shifts. The response was 53% (n = 411) for internists, 52% (n = 359) for surgeons, and 36% (n = 213) for radiologists. Due to non-response on specific questions there were 367 internists, 316 surgeons, and 71 radiologists included in the analyses. Multilevel analyses were used to analyze the data. Part-time medical specialists do not spend proportionally more time on direct patient care. With respect to night and weekend shifts, part-time medical specialists account for proportionally more or an equal share of these shifts. The number of hours worked per FTE is higher for part-time than for full-time medical specialists, although this difference is only significant for surgeons. In general, part-time medical specialists do their share of the job. However, we focussed on input only. Besides input, output like the numbers of services provided deserves attention as well. The trend in medicine towards more part-time work has an important consequence: more medical specialists are needed to get the work done. Therefore, a greater number of medical specialists have to be trained. Part-time work is not only a female concern; there are also (international) trends for male medical specialists that show a decline in the number of hours worked. This indicates an overall change in attitudes towards the number of hours medical specialists should work.

Formulation of consumables management models. Development approach for the mission planning processor working model

NASA Technical Reports Server (NTRS)

Connelly, L. C.

1977-01-01

The mission planning processor is a user oriented tool for consumables management and is part of the total consumables subsystem management concept. The approach to be used in developing a working model of the mission planning processor is documented. The approach includes top-down design, structured programming techniques, and application of NASA approved software development standards. This development approach: (1) promotes cost effective software development, (2) enhances the quality and reliability of the working model, (3) encourages the sharing of the working model through a standard approach, and (4) promotes portability of the working model to other computer systems.

Using computer software to improve group decision-making.

PubMed

Mockler, R J; Dologite, D G

1991-08-01

This article provides a review of some of the work done in the area of knowledge-based systems for strategic planning. Since 1985, with the founding of the Center for Knowledge-based Systems for Business Management, the project has focused on developing knowledge-based systems (KBS) based on these models. In addition, the project also involves developing a variety of computer and non-computer methods and techniques for assisting both technical and non-technical managers and individuals to do decision modelling and KBS development. This paper presents a summary of one segment of the project: a description of integrative groupware useful in strategic planning. The work described here is part of an ongoing research project. As part of this project, for example, over 200 non-technical and technical business managers, most of them working full-time during the project, developed over 160 KBS prototype systems in conjunction with MBA course in strategic planning and management decision making. Based on replies to a survey of this test group, 28 per cent of the survey respondents reported their KBS were used at work, 21 per cent reportedly received promotions, pay rises or new jobs based on their KBS development work, and 12 per cent reported their work led to participation in other KBS development projects at work. All but two of the survey respondents reported that their work on the KBS development project led to a substantial increase in their job knowledge or performance.

Top Tips for Senior Leaders in Schools and Colleges: How to Provide Meaningful Experience of the World of Work for Young People as Part of 16 to 19 Study Programmes

ERIC Educational Resources Information Center

National Foundation for Educational Research, 2015

2015-01-01

A core part of 16 to 19 study programmes is the provision of work experience for all young people. It is increasingly recognised that young people need to develop their employability skills, alongside qualifications, in preparation for the world of work and securing a job. This top tips guide offers advice to schools and colleges wishing to…

48 CFR 970.1504-1-7 - Fee base.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Development, or Environmental Management work to be performed. Special equipment purchases shall be addressed... represents the cost of the Production, Research and Development, or Environmental Management work to be... part of the estimated cost of capital equipment (other than special equipment) which the contractor...

Dialogue on sustainable development as part of engineering education: the relevance of the Finnish case : commentary on "a national collaboration process: Finnish engineering education for the benefit of people and environment".

PubMed

Geerts, Robert

2013-12-01

Society invests in the education of engineers because it is expected that the works of engineers will bring good results for society. Because the work of engineers is not value free or neutral, it is important that engineers are educated in the important principles of the social sciences and humanities. This education is essential for the awareness and understanding of what is good for society. Therefore the concept of sustainable development should be part of an education in engineering but only when the social sciences are also a part of it.

Plants and Medicinal Chemistry--2

ERIC Educational Resources Information Center

Bailey, D.

1977-01-01

Second of a two part article on the influence of plants on medicinal chemistry. This part considers how drugs work, the attempts to develop anaesthetics safer than cocaine, and useful poisons. (Author/SL)

Building a Culture of Continuous Improvement and Employee Engagement Using a Daily Management System Part 1: Overview.

PubMed

Maurer, Marsha; Canacari, Elena; Eng, Kimberly; Foley, Jane; Phelan, Cynthia; Sulmonte, Kimberlyann; Wandel, Jane

2018-03-01

A daily management system (DMS) can be used to implement continuous quality improvement and advance employee engagement. It can empower staff to identify problems in the care environment that impact quality or workflow and to address them on a daily basis. Through DMS, improvement becomes the work of everyone, every day. The authors of this 2-part series describe their work to develop a DMS. Part 1 describes the background and organizing framework of the program.

Working in America, Part I. Materials for Using American Issues Forum in the American History Classroom, Topic V.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of General Education Curriculum Development.

The learning module is the first in a three part series which examines American history in light of industrial development and expansion. Presented in field test condition to allow for feedback from students and teachers, the booklet explores the American work ethic through presentation of an extensive teacher background section, eight class…

The Impact of Work Placements on Skills Development and Career Outcomes for Business and Management Graduates

ERIC Educational Resources Information Center

Wilton, Nick

2012-01-01

It has become a received wisdom that the completion of a work placement as part of a sandwich undergraduate degree is of positive benefit both to graduates and employers, particularly in an era that stresses the economic contribution of higher education through developing graduate employability. This benefit is twofold: first, work placements…

Preliminary work toward the development of a dimensional tolerance standard for rapid prototyping

NASA Technical Reports Server (NTRS)

Kennedy, W. J.

1996-01-01

Rapid prototyping is a new technology for building parts quickly from CAD models. It works by slicing a CAD model into layers, then by building a model of the part one layer at a time. Since most parts can be sliced, most parts can be modeled using rapid prototyping. The layers themselves are created in a number of different ways - by using a laser to cure a layer of an epoxy or a resin, by depositing a layer of plastic or wax upon a surface, by using a laser to sinter a layer of powder, or by using a laser to cut a layer of paper. Rapid prototyping (RP) is new, and a standard part for use in comparing dimensional tolerances has not yet been chosen and accepted by ASTM (the American Society for Testing Materials). Such a part is needed when RP is used to build parts for investment casting or for direct use. The objective of this project was to start the development of a standard part by using statistical techniques to choose the features of the part which show curl - the vertical deviation of a part from its intended horizontal plane.

Some autobiographical data (my life before the First World War)

NASA Astrophysics Data System (ADS)

Fesenkov, V. G.; Fesenkova, L. V.

The autobiography of the distinguish astronomy academician V. G. Fesenkov consists of two parts. The first one describes the period before 1914, the second one - the next period of academician life. The education in primary school, Harkov's University, his work in Tashkent and Harkov observatories, work at dissertation, work at the observatories in Paris, Medon and Nyssa are under discussion. This part of biography talks about the educational state and astronomy in Russia and Europe before the First World War. Also there are discussion of life of Russian intelligence at the beginning of XX century and intellectual atmosphere of life and work of scientists in Russia and France. The second part is devoted to the development of native astronomy in the Soviet period.

Maternal Employment and Parenting Through Middle Childhood: Contextualizing Factors

PubMed Central

Buehler, Cheryl; O’Brien, Marion; Swartout, Kevin M.; Zhou, Nan

2014-01-01

The authors used data from the National Institute of Child Health and Human Development Study of Early Child Care and Youth Development (N = 1,364) to examine maternal work hour status and parenting (sensitivity and learning opportunities) from infancy through middle childhood. Work hour status was conceptualized as nonemployment, part time, and full time. Adjusting for covariates, mothers employed part time had higher sensitivity scores and higher provision of child learning opportunity scores than did mothers who were not employed, and these differences characterized families during early childhood rather than middle childhood. Mothers’ provision of child learning opportunities was greater when employed full time (vs. part time) during early childhood. In addition to child age, mothers’ ethnic minority status and partner status moderated the association between maternal work hour status and mothers’ parenting. In general, the findings supported ideas forwarded by role expansionist theory. PMID:25530631

Skills for the Changing Workplace: A Marketing Educator's Guide. Research and Development Series No. 253.

ERIC Educational Resources Information Center

Warmbrod, Catharine P.; Gordon, Marilyn J.

This three-part instructional guide was developed to assist vocational instructors in marketing education to help their students in the development of broadly applicable, nontechnical (often called quality of work life--QWL) skills. The first section of the guide describes in detail the important QWL skills needed for work and identifies specific…

Developing New Teacher Inquiry and Criticality: The Role of Online Discussions

ERIC Educational Resources Information Center

Unwin, Adam

2015-01-01

This work concerns the professional development of UK teachers in their first year of teaching. It is interested in how the online discussions (ODs) these teachers undertook as part of the Master of Teaching contributed to this development process. The teachers worked in online tutor groups made up of teachers from different schools, phases…

System analysis study of space platform and station accommodations for life sciences research facilities. Volume 1: Executive summary. Phase A: Conceptual design and programmatics

NASA Technical Reports Server (NTRS)

1985-01-01

The study was conducted in 3 parts over a 3 year period. The study schedule and the documentation associated with each study part is given. This document summarized selected study results from the conceptual design and programmatics segment of the effort. The objectives were: (1) to update requirements and tradeoffs and develop a detailed design and mission requirements document; (2) to develop conceptual designs and mission descriptions; and (3) to develop programmatic, i.e., work breakdown structure and work breakdown structure dictionary, estimated cost, and implementing plans and schedules.

45 CFR 235.64 - FFP rates, and activities and costs matchable as training expenditures.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., travel and per diem for: (1) Staff development personnel (including support staff) assigned full time to training functions and; (2) Staff development personnel assigned part time to training functions to the... of less than four consecutive work weeks, or part-time training programs; and (4) Stipends, travel...

45 CFR 235.64 - FFP rates, and activities and costs matchable as training expenditures.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., travel and per diem for: (1) Staff development personnel (including support staff) assigned full time to training functions and; (2) Staff development personnel assigned part time to training functions to the... of less than four consecutive work weeks, or part-time training programs; and (4) Stipends, travel...

45 CFR 235.64 - FFP rates, and activities and costs matchable as training expenditures.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., travel and per diem for: (1) Staff development personnel (including support staff) assigned full time to training functions and; (2) Staff development personnel assigned part time to training functions to the... of less than four consecutive work weeks, or part-time training programs; and (4) Stipends, travel...

"Scaffolding" of Action Learning within a Part-Time Management Development Module

ERIC Educational Resources Information Center

Joesbury, Mark

2015-01-01

This Account of Practice describes the introduction and development of action learning within a level 5 module of "Communications at Work" delivered as part of a Business & Technology Education Council (BTEC) Professional Certificate in Management (CMS) between 2005/2006 and 2009/2010. This will commence with a personal narrative and…

Practitioner Research as Part of Professional Development in Initial Teacher Education

ERIC Educational Resources Information Center

Maaranen, Katriina

2009-01-01

The purpose of this research is to seek the connection between professional development and an MA thesis research project, which is conducted as part of initial teacher education in Finland. This article examines the experiences of teachers with work experience, but without an official qualification, who recently completed their MA thesis. The…

Process Consultation: Its Role in Organization Development.

ERIC Educational Resources Information Center

Schein, Edgar H.

This volume focuses on the process by which the consultant builds readiness for organizational development (OD) programs, actually conducts training, and works with the key individuals of an organization as part of an OD program. Part I describes in some detail the human processes in organizations--communication, functional roles of group members,…

Soviet Political Perspectives on Power Projection.

DTIC Science & Technology

1987-03-01

justified by the recognition on the part of many Soviet economists that the traditional Soviet development model does not work. Rapid nationalization...37 Models of Economic Development................................43 IV. ARMED STRUGGLE AND REVOLUTIONARY CHANGE...Soviets always describe revolutionary change in ~.~ the Third World as merely the product of local social and political forces, part of an inevitable

Relations between Work and Life Away from Work among University Faculty.

ERIC Educational Resources Information Center

Sorcinelli, Mary Deane; Near, Janet P.

1989-01-01

As part of a study on faculty career development, analyses focused on the degree to which experiences and/or feelings associated with work directly colored or "spilled over" to life outside of work and vice versa. Differences by gender and rank were also examined. (Author/MLW)

28 CFR 545.20 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COMPENSATION Inmate Work and Performance Pay Program § 545.20 Purpose and scope. (a) The Bureau of Prisons...) Reduces inmate idleness, while allowing the inmate to improve and/or develop useful job skills, work... all or part of the work program. (b) The Warden may recognize an inmate's work performance or...

Developments in Educational Leave of Absence.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France). Centre for Educational Research and Innovation.

The document evaluates present international developments in the area of leave of absence during working hours for educational purposes. Part 1, Educational Leave of Absence: A Comparative Analysis, contains five chapters: (1) Towards a New Right to Education, discussing recurrent education, the world of work, the International Labor Organization,…

The Work/Family Challenge: A Key Career Development Issue.

ERIC Educational Resources Information Center

Kahnweiler, William M; Kahnweiler, Jennifer B.

1992-01-01

A few corporations are responding to the impact of family structural changes on workers' ability to balance their roles with flexible benefits and schedules and with training. Work/family issues are an integral part of career and life decision making and must be incorporated into the career development process. (SK)

Job-Linked Literacy: Innovative Strategies at Work. Part III. Moving Ahead: Basic Skills for Career Advancement. A Work in America Policy Study.

ERIC Educational Resources Information Center

Rosow, Jerome M.; Zager, Robert

This volume, Interim Report No. 3 in a 3-year study, considers literacy programs designed to qualify employees for promotions or professional advancement. It adopts a multidimensional definition of moving ahead, one that extends to monetary rewards, career development, and employment security. The volume is divided into two parts: report and case…

The Vanderbilt Professional Nursing Practice Program: part 1: Growing and supporting professional nursing practice.

PubMed

Robinson, Karen; Eck, Carol; Keck, Becky; Wells, Nancy

2003-09-01

Professional practice programs are designed to attract, retain, and reward nurses. This three-part series will describe Vanderbilt's performance-based career advancement system, the Vanderbilt Professional Nursing Practice Program (VPNPP). Part 1 outlines the overall program's foundation, philosophical background, and basic structure. The VPNPP is built upon Benner's work, distinguishing among four levels of practice: novice, competent, proficient, and expert. Work by many in the organization identified the expected behaviors for nurses at each level, which were then used to develop clear process evaluation criteria. Part 2 will examine the performance measurement and evaluation system created to support the program. The process of advancing within the program will be described in part 3.

Part-time and full-time medical specialists, are there differences in allocation of time?

PubMed Central

de Jong, Judith D; Heiligers, Phil; Groenewegen, Peter P; Hingstman, Lammert

2006-01-01

Background An increasing number of medical specialists prefer to work part-time. This development can be found worldwide. Problems to be faced in the realization of part-time work in medicine include the division of night and weekend shifts, as well as communication between physicians and continuity of care. People tend to think that physicians working part-time are less devoted to their work, implying that full-time physicians complete a greater number of tasks. The central question in this article is whether part-time medical specialists allocate their time differently to their tasks than full-time medical specialists. Methods A questionnaire was sent by mail to all internists (N = 817), surgeons (N = 693) and radiologists (N = 621) working in general hospitals in the Netherlands. Questions were asked about the actual situation, such as hours worked and night and weekend shifts. The response was 53% (n = 411) for internists, 52% (n = 359) for surgeons, and 36% (n = 213) for radiologists. Due to non-response on specific questions there were 367 internists, 316 surgeons, and 71 radiologists included in the analyses. Multilevel analyses were used to analyze the data. Results Part-time medical specialists do not spend proportionally more time on direct patient care. With respect to night and weekend shifts, part-time medical specialists account for proportionally more or an equal share of these shifts. The number of hours worked per FTE is higher for part-time than for full-time medical specialists, although this difference is only significant for surgeons. Conclusion In general, part-time medical specialists do their share of the job. However, we focussed on input only. Besides input, output like the numbers of services provided deserves attention as well. The trend in medicine towards more part-time work has an important consequence: more medical specialists are needed to get the work done. Therefore, a greater number of medical specialists have to be trained. Part-time work is not only a female concern; there are also (international) trends for male medical specialists that show a decline in the number of hours worked. This indicates an overall change in attitudes towards the number of hours medical specialists should work. PMID:16515698

Research in Mathematics Education.

ERIC Educational Resources Information Center

Shumway, Richard J., Ed.

This volume represents an effort to develop a definitive reference work on research in mathematics education. The reference is divided into two parts. Part 1, on the research process, focuses on problems of research methods and their relevance to research in mathematics education. Part 1 also introduces the beginner to some of the issues and…

Towards Effective International Work-Integrated Learning Practica in Development Studies: Reflections on the Australian Consortium for "In-Country" Indonesian Studies' Development Studies Professional Practicum

ERIC Educational Resources Information Center

Rosser, Andrew

2012-01-01

In recent years, overseas work-integrated learning practica have become an increasingly important part of development studies curricula in "Northern" universities. This paper examines the factors that shape pedagogical effectiveness in the provision of such programmes, focusing on the case of the Australian Consortium for…

DICOM static and dynamic representation through unified modeling language

NASA Astrophysics Data System (ADS)

Martinez-Martinez, Alfonso; Jimenez-Alaniz, Juan R.; Gonzalez-Marquez, A.; Chavez-Avelar, N.

2004-04-01

The DICOM standard, as all standards, specifies in generic way the management in network and storage media environments of digital medical images and their related information. However, understanding the specifications for particular implementation is not a trivial work. Thus, this work is about understanding and modelling parts of the DICOM standard using Object Oriented methodologies, as part of software development processes. This has offered different static and dynamic views, according with the standard specifications, and the resultant models have been represented through the Unified Modelling Language (UML). The modelled parts are related to network conformance claim: Network Communication Support for Message Exchange, Message Exchange, Information Object Definitions, Service Class Specifications, Data Structures and Encoding, and Data Dictionary. The resultant models have given a better understanding about DICOM parts and have opened the possibility of create a software library to develop DICOM conformable PACS applications.

Developing Managers: A View from the Non-Profit Sector

ERIC Educational Resources Information Center

Myers, Jan

2004-01-01

This paper is rooted in practitioner experience of working within the non-profit sector. It is both underpinned by Master's level research and built on as part of an on-going sense-making process for the author in terms of her doctoral research. Focusing on a specific part of the sector--local development agencies, explores how personal theories…

Not by the Color of Their Skin; The Impact of Racial Differences on the Child's Development.

ERIC Educational Resources Information Center

McDonald, Marjorie

Contents of this book include: Part I: "The Nursery School and Its Racial Integration"--introduction, establishing physical and psychological integration; staff meetings; observing and working through; Part II: "Theory and Practice"--skin color anxiety: the skin and its importance in personality development; skin color anxiety, the visual impact,…

Bilingual Competence and Bilingual Proficiency in Child Development

ERIC Educational Resources Information Center

Francis, Norbert

2011-01-01

When two or more languages are part of a child's world, we are presented with a rich opportunity to learn something about language in general and about how the mind works. In this book, Norbert Francis examines the development of bilingual proficiency and the different kinds of competence that come together in making up its component parts. In…

Quantitative characterization of genetic parts and circuits for plant synthetic biology.

PubMed

Schaumberg, Katherine A; Antunes, Mauricio S; Kassaw, Tessema K; Xu, Wenlong; Zalewski, Christopher S; Medford, June I; Prasad, Ashok

2016-01-01

Plant synthetic biology promises immense technological benefits, including the potential development of a sustainable bio-based economy through the predictive design of synthetic gene circuits. Such circuits are built from quantitatively characterized genetic parts; however, this characterization is a significant obstacle in work with plants because of the time required for stable transformation. We describe a method for rapid quantitative characterization of genetic plant parts using transient expression in protoplasts and dual luciferase outputs. We observed experimental variability in transient-expression assays and developed a mathematical model to describe, as well as statistical normalization methods to account for, this variability, which allowed us to extract quantitative parameters. We characterized >120 synthetic parts in Arabidopsis and validated our method by comparing transient expression with expression in stably transformed plants. We also tested >100 synthetic parts in sorghum (Sorghum bicolor) protoplasts, and the results showed that our method works in diverse plant groups. Our approach enables the construction of tunable gene circuits in complex eukaryotic organisms.

Working with and promoting early career scientists within a larger community

NASA Astrophysics Data System (ADS)

Pratt, K.

2017-12-01

For many scientific communities, engaging early career researchers is critical for success. These young scientists (graduate students, postdocs, and newly appointed professors) are actively forming collaborations and instigating new research programs. They also stand to benefit hugely from being part of a scientific community, gaining access to career development activities, becoming part of strong collaborator networks, and achieving recognition in their field of study — all of which will help their professional development. There are many ways community leaders can work proactively to support and engage early career scientists, and it it is often a community manager's job to work with leadership to implement such activities. In this presentation, I will outline ways of engaging early career scientists at events and tailored workshops, of promoting development of their leadership skills, and of creating opportunities for recognizing early career scientists within larger scientific communities. In this talk, I will draw from my experience working with the Deep Carbon Observatory Early Career Scientist Network, supported by the Alfred P. Sloan Foundation.

Canadian Environmental Concerns: Winnipeg, Manitoba. Progress Report. Project Canada West.

ERIC Educational Resources Information Center

Western Curriculum Project on Canada Studies, Edmonton (Alberta).

Part I of this progress report places emphasis on curriculum development from the standpoint of the teacher-developer. The role is defined and factors such as teacher selection, release time, administrative cooperation, work schedules, assigned work space, and benefits to the school division and to the teacher are discussed. Recommendations deal…

Reflection for Learning, Learning for Reflection: Developing Indigenous Competencies in Higher Education

ERIC Educational Resources Information Center

Bennett, Dawn; Power, Anne; Thomson, Chris; Mason, Bonita; Bartleet, Brydie-Leigh

2016-01-01

Reflection is an essential part of students' critically reflective development within experiential-learning contexts; it is arguably even more important when working cross-culturally. This paper reports from a national, arts-based service-learning project in which students in creative arts, media and journalism, and preservice teachers worked with…

Developing a Comprehensive Learning Community Program: Navigating Change through Shifting Institutional Priorities

ERIC Educational Resources Information Center

Workman, Jamie L.; Redington, Lyn

2016-01-01

This is the third of a three-part series which will share information about how a mid-size, comprehensive university has worked to a learning community program, including a residential curriculum. This article focuses on how those working with Learning Communities navigate program development during changing institutional priorities.

Curriculum Change Part 2a. Programme Development in Colleges. Part 2a: The Work Activities of Teachers on TEC Certificate Programmes.

ERIC Educational Resources Information Center

Dodd, S.; And Others

A study examined the day-to-day work activities of teachers of Technician Education Council (TEC) certificate programs in Great Britain. During the study, a detailed questionnaire dealing with the tasks performed by TEC teachers, the amount of time spent on TEC teachers on individual activities, and the impact of the TEC programs on teacher…

Supporting self and others: from staff nurse to nurse consultant. Part 2: learning from experience.

PubMed

Fowler, John

This series of articles explores various ways of supporting staff who work in the fast-moving and ever-changing health service. In the first article, John Fowler, an experienced nursing lecturer, author and consultant examined the importance of developing a supportive working culture. Here in the second part of the series, he looks at the supportive effects of learning from experience.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rybicki, E.F.; Luiskutty, C.T.; Sutrick, J.S.

This research is part of a larger program sponsored by the United States Department of Energy with the objective of developing better methods to produce gas from low permeability formations in western gas sands. This large research program involves several universities and research centers. Each group is involved in a different area of study to answer specific questions. The hydraulic fracturing computer model has three components---a model for fracture geometry, a model for proppant transport, and a computer program that couples the two models. The fracture geometry model was developed at Oral Roberts University and the proppant transport model wasmore » developed at The University of Tulsa prior to the start of the present work. The present work is directed at enhancing the capabilities of these two models and coupling them to obtain a single model for evaluating the final fracture geometry and proppant distribution within the fracture. The report is organized into four parts. Part 1 describes the fracture geometry modeling effort accomplished at Oral Roberts University, NIPER and recently at The University of Tulsa. The proppant transport model, developed for constant height fractures at the University of Tulsa, is contained in Part 2. The coupling of the Proppant Transport Model and the model for the variable height fracture geometry constitutes Part 3 of this report. Part 4 presents a summary of accomplishments and recommendations of this study. 112 refs., 147 figs., 70 tabs.« less

Bibliography of Publications and Presentations During FY 1972-73.

ERIC Educational Resources Information Center

Human Resources Research Organization, Alexandria, VA.

Publications and presentations developed by the Human Resources Research Organization during 1972 and 1973 are listed. Part I of the bibliography contains reports issued during 1973; each citation gives the document title, author, and the contract under which the work was performed. Part II provides abstracts for each document included in Part I…

Statistical Model Selection for TID Hardness Assurance

NASA Technical Reports Server (NTRS)

Ladbury, R.; Gorelick, J. L.; McClure, S.

2010-01-01

Radiation Hardness Assurance (RHA) methodologies against Total Ionizing Dose (TID) degradation impose rigorous statistical treatments for data from a part's Radiation Lot Acceptance Test (RLAT) and/or its historical performance. However, no similar methods exist for using "similarity" data - that is, data for similar parts fabricated in the same process as the part under qualification. This is despite the greater difficulty and potential risk in interpreting of similarity data. In this work, we develop methods to disentangle part-to-part, lot-to-lot and part-type-to-part-type variation. The methods we develop apply not just for qualification decisions, but also for quality control and detection of process changes and other "out-of-family" behavior. We begin by discussing the data used in ·the study and the challenges of developing a statistic providing a meaningful measure of degradation across multiple part types, each with its own performance specifications. We then develop analysis techniques and apply them to the different data sets.

An optimal user-interface for EPIMS database conversions and SSQ 25002 EEE parts screening

NASA Technical Reports Server (NTRS)

Watson, John C.

1996-01-01

The Electrical, Electronic, and Electromechanical (EEE) Parts Information Management System (EPIMS) database was selected by the International Space Station Parts Control Board for providing parts information to NASA managers and contractors. Parts data is transferred to the EPIMS database by converting parts list data to the EP1MS Data Exchange File Format. In general, parts list information received from contractors and suppliers does not convert directly into the EPIMS Data Exchange File Format. Often parts lists use different variable and record field assignments. Many of the EPES variables are not defined in the parts lists received. The objective of this work was to develop an automated system for translating parts lists into the EPIMS Data Exchange File Format for upload into the EPIMS database. Once EEE parts information has been transferred to the EPIMS database it is necessary to screen parts data in accordance with the provisions of the SSQ 25002 Supplemental List of Qualified Electrical, Electronic, and Electromechanical Parts, Manufacturers, and Laboratories (QEPM&L). The SSQ 2S002 standards are used to identify parts which satisfy the requirements for spacecraft applications. An additional objective for this work was to develop an automated system which would screen EEE parts information against the SSQ 2S002 to inform managers of the qualification status of parts used in spacecraft applications. The EPIMS Database Conversion and SSQ 25002 User Interfaces are designed to interface through the World-Wide-Web(WWW)/Internet to provide accessibility by NASA managers and contractors.

Quality of Working Life of Academics and Researchers in the UK: The Roles of Contract Type, Tenure and University Ranking

ERIC Educational Resources Information Center

Fontinha, Rita; Van Laar, Darren; Easton, Simon

2018-01-01

Quality of working life has been defined as the part of overall quality of life that is influenced by work. We developed a mediation model where home-work interface, job and career satisfaction, control at work, and working conditions are considered to be positively related to employee commitment and to the absence of stress at work. These two…

A research framework for the development and implementation of interventions preventing work-related musculoskeletal disorders.

PubMed

van der Beek, Allard J; Dennerlein, Jack T; Huysmans, Maaike A; Mathiassen, Svend Erik; Burdorf, Alex; van Mechelen, Willem; van Dieën, Jaap H; Frings-Dresen, Monique Hw; Holtermann, Andreas; Janwantanakul, Prawit; van der Molen, Henk F; Rempel, David; Straker, Leon; Walker-Bone, Karen; Coenen, Pieter

2017-11-01

Objectives Work-related musculoskeletal disorders (MSD) are highly prevalent and put a large burden on (working) society. Primary prevention of work-related MSD focuses often on physical risk factors (such as manual lifting and awkward postures) but has not been too successful in reducing the MSD burden. This may partly be caused by insufficient knowledge of etiological mechanisms and/or a lack of adequately feasible interventions (theory failure and program failure, respectively), possibly due to limited integration of research disciplines. A research framework could link research disciplines thereby strengthening the development and implementation of preventive interventions. Our objective was to define and describe such a framework for multi-disciplinary research on work-related MSD prevention. Methods We described a framework for MSD prevention research, partly based on frameworks from other research fields (ie, sports injury prevention and public health). Results The framework is composed of a repeated sequence of six steps comprising the assessment of (i) incidence and severity of MSD, (ii) risk factors for MSD, and (iii) underlying mechanisms; and the (iv) development, (v) evaluation, and (vi) implementation of preventive intervention(s). Conclusions In the present framework for optimal work-related MSD prevention, research disciplines are linked. This framework can thereby help to improve theories and strengthen the development and implementation of prevention strategies for work-related MSD.

Development of a job rotation scheduling algorithm for minimizing accumulated work load per body parts.

PubMed

Song, JooBong; Lee, Chaiwoo; Lee, WonJung; Bahn, Sangwoo; Jung, ChanJu; Yun, Myung Hwan

2015-01-01

For the successful implementation of job rotation, jobs should be scheduled systematically so that physical workload is evenly distributed with the use of various body parts. However, while the potential benefits are widely recognized by research and industry, there is still a need for a more effective and efficient algorithm that considers multiple work-related factors in job rotation scheduling. This study suggests a type of job rotation algorithm that aims to minimize musculoskeletal disorders with the approach of decreasing the overall workload. Multiple work characteristics are evaluated as inputs to the proposed algorithm. Important factors, such as physical workload on specific body parts, working height, involvement of heavy lifting, and worker characteristics such as physical disorders, are included in the algorithm. For evaluation of the overall workload in a given workplace, an objective function was defined to aggregate the scores from the individual factors. A case study, where the algorithm was applied at a workplace, is presented with an examination on its applicability and effectiveness. With the application of the suggested algorithm in case study, the value of the final objective function, which is the weighted sum of the workload in various body parts, decreased by 71.7% when compared to a typical sequential assignment and by 84.9% when compared to a single job assignment, which is doing one job all day. An algorithm was developed using the data from the ergonomic evaluation tool used in the plant and from the known factors related to workload. The algorithm was developed so that it can be efficiently applied with a small amount of required inputs, while covering a wide range of work-related factors. A case study showed that the algorithm was beneficial in determining a job rotation schedule aimed at minimizing workload across body parts.

Automated Software Development Workstation (ASDW)

NASA Technical Reports Server (NTRS)

Fridge, Ernie

1990-01-01

Software development is a serious bottleneck in the construction of complex automated systems. An increase of the reuse of software designs and components has been viewed as a way to relieve this bottleneck. One approach to achieving software reusability is through the development and use of software parts composition systems. A software parts composition system is a software development environment comprised of a parts description language for modeling parts and their interfaces, a catalog of existing parts, a composition editor that aids a user in the specification of a new application from existing parts, and a code generator that takes a specification and generates an implementation of a new application in a target language. The Automated Software Development Workstation (ASDW) is an expert system shell that provides the capabilities required to develop and manipulate these software parts composition systems. The ASDW is now in Beta testing at the Johnson Space Center. Future work centers on responding to user feedback for capability and usability enhancement, expanding the scope of the software lifecycle that is covered, and in providing solutions to handling very large libraries of reusable components.

An Evaluation of Training Modules for Part-Time Workers in Community Education. SCRE Project Report No. 19.

ERIC Educational Resources Information Center

Castelino, Celine; Munn, Pamela

This project evaluated three modules, which were developed to meet key basic training requirements common to part-time workers in different branches of community education (adult education, community development, and youth work). Draft modules were sent to about 40 individuals or organizations in the field for comment on their structure and…

Online Training for Working with Student Veterans: A Social Work Elective Course

ERIC Educational Resources Information Center

Selber, Katherine; Biggs, Mary Jo Garcia; Chavkin, Nancy Feyl; Wright, Micah C.

2015-01-01

This article describes one school of social work's innovative online elective course to prepare Masters of Social Work (MSW) students for practice with the military, veterans and their families. Developed as part of a university-wide Veterans Initiative, this online course keeps the focus on the student veteran and uses the best practices of…

Work and General Education.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and the Pacific.

Presentations and other materials are provided from the Asia and the Pacific Programme of Educational Innovation for Development (APEID) Planning and Review Meeting on Work as an Integral Part of General Education. The focus is on how education, through an orientation to work, could help to decrease the gravity of the problems of population…

A bibliography of shift work research : 1950-1982.

DOT National Transportation Integrated Search

1983-09-01

This bibliography was developed as part of a research task concerning the impact of shift work on employee job satisfaction, productivity, perceived job difficulty, and subjective health. Some selectivity was exercised in the choice of references for...

Getting Vygotskian about Theory of Mind: Mediation, Dialogue, and the Development of Social Understanding

ERIC Educational Resources Information Center

Fernyhough, Charles

2008-01-01

The ideas of Vygotsky [Vygotsky, L. S. (1987). "Thinking and speech." In "The collected works of L. S. Vygotsky," (Vol. 1). New York: Plenum. (Original work published 1934.)] have been increasingly influential in accounting for social-environmental influences on the development of social understanding (SU). In the first part of this article, I…

Development of the NIDA-Funded Center on Substance Abuse and Mental Illness

ERIC Educational Resources Information Center

Singer, Mark I.; Kola, Lenore A.; Biegel, David E.

2008-01-01

This article describes one school's effort to establish a social work research development center in the area of coexisting drug and mental disorders (dual disorders), within the context of the social work profession's efforts to compete more effectively for federal research grants. This center was funded as part of a successful application in…

Work-Based Researchers and Communities of Practice: Conceptual and Gestational Dilemmas

ERIC Educational Resources Information Center

Sense, Andrew

2015-01-01

Drawing on a presumption that a Community of Practice (COP) can add significant value to the situated learning development of adults in any context, this paper exposes and analyses the challenges faced in facilitating the development of a COP involving part-time work-based researchers. Using an empirical case example involving a collaborative…

Brian Ball | NREL

Science.gov Websites

Integration program, developing inverse modeling algorithms to calibrate building energy models, and is part related equipment. This work included developing an engineering grade operator training simulator for an

Managing Highway Maintenance: Standards for Maintenance Work, Part 2, Unit 8, Level 2.

ERIC Educational Resources Information Center

Federal Highway Administration (DOT), Washington, DC. Offices of Research and Development.

Part of the series "Managing Highway Maintenance," the unit describes the ways maintenance standards are developed and some of the factors which are considered in setting standards; the preceding unit on standards (part 1) should be completed before reading this unit. The format is a programed, self-instruction approach in which…

Mothers' part-time employment: associations with mother and family well-being.

PubMed

Buehler, Cheryl; O'Brien, Marion

2011-12-01

The associations between mothers' part-time employment and mother well-being, parenting, and family functioning were examined using seven waves of the NICHD Study of Early Child Care and Youth Development data (N = 1,364), infancy through middle childhood. Concurrent comparisons were made between families in which mothers were employed part time and both those in which mothers were not employed and those in which mothers were employed full time. Using multivariate analysis of covariance with extensive controls, results indicated that mothers employed part time had fewer depressive symptoms during the infancy and preschool years and better self-reported health at most time points than did nonemployed mothers. Across the time span studied, mothers working part time tended to report less conflict between work and family than those working full time. During their children's preschool years, mothers employed part time exhibited more sensitive parenting than did other mothers, and at school age were more involved in school and provided more learning opportunities than mothers employed full time. Mothers employed part time reported doing a higher proportion of child care and housework than mothers employed full time. Part-time employment appears to have some benefits for mothers and families throughout the child rearing years.

Raising Teachers' Voices: An In-Depth Qualitative Inquiry into Teachers' Working Conditions and Professional Development Needs in Khyber Pakhtunkhwa, a Province of Pakistan

ERIC Educational Resources Information Center

Ali, Takbir

2018-01-01

This study documented in detail teachers' voices about their working conditions, professional development needs and opportunities to cater to these needs. The study reported in this paper was conducted as part of a large-scale study that used mixed methods to assess teachers' professional development needs. The qualitative data reported in this…

How Do We Tell the Workers? The Socioeconomic Foundations of Work and Vocational Education.

ERIC Educational Resources Information Center

Kincheloe, Joe L.

This book examines the socioeconomic foundations of work and vocational education (VE), and is divided into the following 6 parts and 18 chapters: (1) nature of work (a sense of purpose; modernism and the evolution of the technocratic mind; power and the development of the modernist economy; good work, bad work, and the debate over ethical labor);…

Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 1: Current Practice and Processing Fundamentals

NASA Astrophysics Data System (ADS)

Elliott, R.; Coley, K.; Mostaghel, S.; Barati, M.

2018-02-01

The increasing demand for high-performance steel alloys has led to development of transformation-induced plasticity (TRIP) and twinning-induced plasticity (TWIP) alloys over the past three decades. These alloys offer exceptional combinations of high tensile strength and ductility. Thus, the mechanical behavior of these alloys has been a subject of significant work in recent years. However, the challenge of economically providing Mn in the quantity and purity required by these alloys has received considerably less attention. To enable commercial implementation of ultrahigh-Mn alloys, it is desirable to lower the high material costs associated with their production. Therefore, the present work reviews Mn processing routes in the context of the chemical requirements of these alloys. The aim of this review is to assess the current state of the art regarding reduction of manganese ores and provide a comprehensive reference for researchers working to mitigate material processing costs associated with Mn production. The review is presented in two parts: Part 1 introduces TRIP and TWIP alloys, current industrial practice, and pertinent thermodynamic fundamentals; Part 2 addresses available literature regarding reduction of Mn ores and oxides, and seeks to identify opportunities for future process development.

PlanWorks: A Debugging Environment for Constraint Based Planning Systems

NASA Technical Reports Server (NTRS)

Daley, Patrick; Frank, Jeremy; Iatauro, Michael; McGann, Conor; Taylor, Will

2005-01-01

Numerous planning and scheduling systems employ underlying constraint reasoning systems. Debugging such systems involves the search for errors in model rules, constraint reasoning algorithms, search heuristics, and the problem instance (initial state and goals). In order to effectively find such problems, users must see why each state or action is in a plan by tracking causal chains back to part of the initial problem instance. They must be able to visualize complex relationships among many different entities and distinguish between those entities easily. For example, a variable can be in the scope of several constraints, as well as part of a state or activity in a plan; the activity can arise as a consequence of another activity and a model rule. Finally, they must be able to track each logical inference made during planning. We have developed PlanWorks, a comprehensive system for debugging constraint-based planning and scheduling systems. PlanWorks assumes a strong transaction model of the entire planning process, including adding and removing parts of the constraint network, variable assignment, and constraint propagation. A planner logs all transactions to a relational database that is tailored to support queries for of specialized views to display different forms of data (e.g. constraints, activities, resources, and causal links). PlanWorks was specifically developed for the Extensible Universal Remote Operations Planning Architecture (EUROPA(sub 2)) developed at NASA, but the underlying principles behind PlanWorks make it useful for many constraint-based planning systems. The paper is organized as follows. We first describe some fundamentals of EUROPA(sub 2). We then describe PlanWorks' principal components. We then discuss each component in detail, and then describe inter-component navigation features. We close with a discussion of how PlanWorks is used to find model flaws.

General Aviation Interior Noise. Part 3; Noise Control Measure Evaluation

NASA Technical Reports Server (NTRS)

Unruh, James F.; Till, Paul D.; Palumbo, Daniel L. (Technical Monitor)

2002-01-01

The work reported herein is an extension to the work accomplished under NASA Grant NAG1-2091 on the development of noise/source/path identification techniques for single engine propeller driven General Aviation aircraft. The previous work developed a Conditioned Response Analysis (CRA) technique to identify potential noise sources that contributed to the dominating tonal responses within the aircraft cabin. The objective of the present effort was to improve and verify the findings of the CRA and develop and demonstrate noise control measures for single engine propeller driven General Aviation aircraft.

Disclosure: what works now and what can work even better.

PubMed

2004-01-01

This three-part series on disclosure of unanticipated outcomes in health care is intended to provide an overview of the current thinking about disclosure and steps the organization can take to develop an approach to disclosure that is comprehensive and supportive of the needs of patients, families and providers. What should be apparent is that disclosure is not simply a requirement--it is a philosophy and part of a comprehensive approach to patient/family communication.

Arbitrary order 2D virtual elements for polygonal meshes: part II, inelastic problem

NASA Astrophysics Data System (ADS)

Artioli, E.; Beirão da Veiga, L.; Lovadina, C.; Sacco, E.

2017-10-01

The present paper is the second part of a twofold work, whose first part is reported in Artioli et al. (Comput Mech, 2017. doi: 10.1007/s00466-017-1404-5), concerning a newly developed Virtual element method (VEM) for 2D continuum problems. The first part of the work proposed a study for linear elastic problem. The aim of this part is to explore the features of the VEM formulation when material nonlinearity is considered, showing that the accuracy and easiness of implementation discovered in the analysis inherent to the first part of the work are still retained. Three different nonlinear constitutive laws are considered in the VEM formulation. In particular, the generalized viscoelastic model, the classical Mises plasticity with isotropic/kinematic hardening and a shape memory alloy constitutive law are implemented. The versatility with respect to all the considered nonlinear material constitutive laws is demonstrated through several numerical examples, also remarking that the proposed 2D VEM formulation can be straightforwardly implemented as in a standard nonlinear structural finite element method framework.

Villaflores: Municipal forest fire management model

Treesearch

Pedro Martínez Muñoz; Carlos Alberto Velázquez Sanabria

2013-01-01

As provided for in the General Law on Sustainable Forestry Development, the Municipality of Villaflores has worked on a continuous basis since 2002 to reduce the damage caused by forest fires as part of its working agenda, in conjunction with Federal and State agencies and NGOs. The work plan has the following phases: a) Inter-agency coordination:...

Entry of Young People into Working Life. General Report.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

This booklet examines the problems encountered by youth while making the school-to-work transition and analyzes the measures undertaken in the Organization for Economic Co-operation and Development (OECD) member countries to deal with youth unemployment. Part I in an analysis of young people's difficulties in entering the working life describes…

Practice Ethical Behavior. Work Maturity Skills. Competency 4.0.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

Designed for use as a part of the Work Maturity Skills Training Program, this unit consists of instructional materials dealing with practicing ethical behavior. (The Work Maturity Skills Training Program is a set of individualized competency-based units that are designed to help participants develop the competencies they need to find and retain…

Seeing Epistemic Order: Construction and Transmission of Evaluative Criteria

ERIC Educational Resources Information Center

Shalem, Yael; Slonimsky, Lynne

2010-01-01

This paper focuses on formative assessment in the field of higher education. It examines Bernstein's work on vertical discourses and knowledge structures with the view to deepening understanding of the concept of assessment "for" learning. The first part of the paper draws on Vygotsky's work on concept development and Bernstein's work on…

Education, Training and the Future of Work I: Social, Political and Economic Contexts of Policy Development.

ERIC Educational Resources Information Center

Ahier, John, Ed.; Esland, Geoff, Ed.

This first of two volumes is organized around the theme of the social, political, and economic contexts of education and training. (Volume II focuses on the development of vocational policy. Both volumes form part of the Open University MA Module, Education, Training, and the Future of Work.) An introduction (Geoff Esland, John Ahier) provides an…

Holistic Design for Total Product Well Being

NASA Technical Reports Server (NTRS)

Adams, Chris W.; Hamilton, George S.

2004-01-01

Recent hardware development work at NASA's Marshall Space Flight Center creates and argument for the use of a holistic design approach as opposed to a piece part design approach. A piece part design approach being one where individual pieces are developed to their finished state having to meet certain interface and human engineering requirements without much consideration to the final product as a whole. A holistic design approach being one where the final product is evaluated early and frequently during the design process, and individual parts are developed with consideration to how they interact a whole,and how they interact with the user and environment. Examples from the development of the Materials Science Research Rack - 1 will illustrate: a design failure due to piece part design; a design save, due to a failure of piece part design, but saved by evaluating the design holistically; and a design success due to a holistic design approach.

For a Psychosocial Approach to Decent Work.

PubMed

Pouyaud, Jacques

2016-01-01

The notion of decent work was developed by the International Labour Organization 20 years ago. The notion is now well known by lawyers, economists, and sociologists, and even if it appears difficult to define it clearly, it constitutes a useful general framework with which to think of the relationships between policy practices, work market globalization, and human rights principles. The fields of career guidance and counseling psychology are highly concerned by questions of social justice and human rights that people experience through work. Career choices being made in a liquid and unstable society, incompatibility between individualist values and collective work issues, increasing psychological health problems at work, work-family balance in precarious job situations, the growing necessity of mobility, adaptability or flexibility… all of these questions are at the heart of current career counseling practices, and concern the decent work debate. Nevertheless, the notion of decent work is not well developed in the field of vocational psychology. Despite its relevance, it is difficult to operationalize the policy and human rights principles during career counseling sessions. The article aims to explore the usefulness of the concept for career counselors, and to propose a psychosocial framework that incorporates decent work in career counseling practices. The first part of this article presents the theoretical bases of the notion of decent work and their possible use in the field of psychology. It deals with the necessity of a multilevel and psychosocial perspective, that takes into account both objective and subjective dimensions of decent work. The second part focuses on a case study illustrating how the notion of decent work emerges during counseling sessions. Four levels of the work experience linked with subjective and objective dimensions of decent work are explored; the personal level, the activity level, the collective level, and the social level. Finally, the third part discusses and proposes a framework based on the analysis of the four dimensions of work (activity, trade, others and society) in order to integrate a psychosocial view of decent work into career counseling.

40 CFR 130.11 - Program management.

Code of Federal Regulations, 2011 CFR

2011-07-01

... quality standards (WQS), development of alternative approaches to control pollution, implementation and... primarily to manage the wastewater treatment works construction grants program pursuant to the provisions of 40 CFR part 35, subpart J. A State may also use part of the 205(g) funds to administer approved...

Paid part-time employment and academic performance of undergraduate nursing students.

PubMed

Rochford, Céire; Connolly, Michael; Drennan, Jonathan

2009-08-01

Nursing students are increasingly undertaking paid term-time employment to finance their living expenses and studies. However the type and duration of this part-time work is unknown; furthermore there is a limited evidence on the extent to which this part-time employment is impacting on academic performance and the student's experience of higher education. To address this shortfall this study undertook a cross-sectional survey of undergraduate nursing students to explore the incidence of student involvement in term-time employment and to develop an understanding of the relationship of employment on student's academic and clinical achievement, and on their experience of higher education. The results found that the vast majority of the sample were working in part-time employment during term-time. The average number of hours worked per week was sixteen. The number of hours worked per week was found to be a predictor of course performance, the student's experience of college and grades achieved. Students who worked greater hours reported negative outcomes in each of these three domains. The findings also support the contention that it is not working per se that has a detrimental effect on student outcomes but the numbers of hours' students are actually working while attending college. Therefore policy makers, educationalists and health service providers need to be aware of the burden that nursing students may have to contend with in combining work with their academic studies.

VAS: A Vision Advisor System combining agents and object-oriented databases

NASA Technical Reports Server (NTRS)

Eilbert, James L.; Lim, William; Mendelsohn, Jay; Braun, Ron; Yearwood, Michael

1994-01-01

A model-based approach to identifying and finding the orientation of non-overlapping parts on a tray has been developed. The part models contain both exact and fuzzy descriptions of part features, and are stored in an object-oriented database. Full identification of the parts involves several interacting tasks each of which is handled by a distinct agent. Using fuzzy information stored in the model allowed part features that were essentially at the noise level to be extracted and used for identification. This was done by focusing attention on the portion of the part where the feature must be found if the current hypothesis of the part ID is correct. In going from one set of parts to another the only thing that needs to be changed is the database of part models. This work is part of an effort in developing a Vision Advisor System (VAS) that combines agents and objected-oriented databases.

A report on the USL NASA/RECON project. Part 2: PC-based R and D in support of IS and R applications

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Chum, Frank Y.; Hall, Philip P.; Moreau, Dennis R.; Triantafyllopoulos, Spiros

1984-01-01

This Working Paper Series entry describes the PC R and D development effort initiated as part of the NASA/RECON Project at the University of Southwestern Louisiana. This effort involves the development of a PC-based environment for the prototyping and evaluation of various tools designed to enhance the interaction between scientists and engineers and remote information systems. The design of PC-based tools for the enhancement of the NASA/RECON university-level courses is described as well as the design of a multi-functional PC-based workstation to support access to and processing of information from local, distributed, and remote sources. Course preparation activities are described in a companion report entitled A Report on the USL NASA/RECON Project: Part 1, the Development of a Transportable, University-Level, IS and R Educational Program, by Suzy Gallagher and Martin Granier, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-7.

Designing Writing Assignments for Vocational-Technical Courses. A Guide for Teachers in the Two-Year College and Technical Institute.

ERIC Educational Resources Information Center

Killingsworth, Jimmie, Ed.; And Others

The 27 articles in this 6-part guide provide information on developing and implementing writing instruction as part of content-area courses in two-year vocational-technical colleges. Part One, General Concerns, includes "Making Writing Work for You in the Interactive Classroom" (Killingsworth, Rude); "Evaluating and Responding to Student Writing"…

High Energy/LET Radiation EEE Parts Certification Handbook

NASA Technical Reports Server (NTRS)

Reddell, Brandon

2012-01-01

Certifying electronic components is a very involved process. It includes pre-coordination with the radiation test facility for time, schedule and cost, as well as intimate work with designers to develop test procedures and hardware. It also involves work with radiation engineers to understand the effects of the radiation field on the test article/setup as well as the analysis and production of a test report. The technical content of traditional ionizing radiation testing protocol is in wide use and generally follows established standards (ref. Appendix C). This document is not intended to cover all these areas but to cover the methodology of using Variable Depth Bragg Peak (VDBP) to accomplish the goal of characterizing an electronic component. The Variable Depth Bragg Peak (VDBP) test method is primarily used for deep space applications of electronics. However, it can be used on any part for any radiation environment, especially those parts where the sensitive volume cannot be reached by the radiation beam. An example of this problem would be issues that arise in de-lidding of parts or in parts with flip-chip designs, etc. The VDBP method is ideally suited to test modern avionics designs which increasingly incorporate commercial off-the-shelf (COTS) parts and units. Johnson Space Center (JSC) developed software provides assistance to users in developing the radiation characterization data from the raw test data.

The Development of Nanotechnologies and Advanced Materials Industry in Science and Entrepreneurship: Scientific Indicators. A Case Study of Latvia (Part Three)

NASA Astrophysics Data System (ADS)

Geipele, S.; Geipele, I.; Kauskale, L.; Zeltins, N.; Staube, T.; Pudzis, E.

2017-10-01

The present scientific paper is the third part and continuation of the indepth scientific study of the developed system of engineering economic indicators, where the authors obtain results from the scientific research presented in a series of works on the development of the nanotechnologies and advanced materials industry in science and entrepreneurship in Latvia. Part three determines the crucial scientific indicators of the development of nano-field at the macro, micro, and meso development levels of the economic environment in Latvia. The paper provides the interaction of new identified indicators of nanofield in terms of further scientific and practical activities. Latvia is analysed in comparison with other countries in the world.

Reflecting Equity and Diversity. Part I: Guidelines and Procedure for Evaluating Bias in Instructional Materials. Part II: Bias Awareness Training Worksheets. Part III: Bias Awareness and Procedure Training Course.

ERIC Educational Resources Information Center

Bebermeyer, Jim; Edmond, Mary, Ed.

Reflecting a need to prepare students for working in diverse organizations, this document was developed to increase school officials' awareness of bias in instructional materials and help them select bias-free materials. A number of the examples illustrate situations dealing with diversity in the workplace. The guide is divided into three parts:…

The Development of Newtonian Calculus in Britain, 1700-1800

NASA Astrophysics Data System (ADS)

Guicciardini, Niccoló

2003-11-01

Introduction; Overture: Newton's published work on the calculus of fluxions; Part I. The Early Period: 1. The diffusion of the calculus (1700-1730); 2. Developments in the calculus of fluxions (1714-1733); 3. The controversy on the foundations of the calculus (1734-1742); Part II. The Middle Period: 4. The textbooks on fluxions (1736-1758); 5. Some applications of the calculus (1740-1743); 6. The analytic art (1755-1785); Part III. The Reform: 7. Scotland (1785-1809); 8. The Military Schools (1773-1819); 9. Cambridge and Dublin (1790-1820); 10. Tables; Endnotes; Bibliography; Index.

Entkolonialisierung der Erziehung — das Beispiel Der VR Kongo

NASA Astrophysics Data System (ADS)

Radtke, Frank-Olaf; Gstettner, Peter; Streiffeler, Friedhelm

1981-03-01

The first part of this contribution attempts to recapitulate the economic and social conditions facing educational policy in post-colonial Africa. The second part shows that the dependence on world economy is aggravated by the separation of education from productive work, which is a concomitant of the institutionalisation of education. In the communally-organised traditional African societies, education was incumbent on all members of the society; it was part of the common life-and-work process. It was not until the school as institution had been introduced that education came to be governed by the principles of the division of labour and took over the function of the selection and creation of privilege. This has led to an alientation of school leavers from productive work. The educational system as a whole can no longer support those societal tasks that require creativity and development. Following a phase of quantitative expansion, the third part points out that African educational policy is currently making great efforts to give the educational system a qualitative reorientation towards the real needs of African societies. The fourth part describes the detachment from Euro-American strategies of development and innovation, and the revaluation of elements of traditional education. Taking as an example the programme, `Ecole du peuple', which aims to reorganise the educational system of the People's Republic of the Congo from pre-school to university, the difficulties of such an undertaking are investigated.

Balancing Work Responsibilities and Family Needs: The Federal Civil Service Response

DTIC Science & Technology

1991-11-01

Since better part-time benefits package than some other our analysis unco’ ered no substantive drawbacks employers . Federal part-timers are typically...Government can improve its status as a/model employer in the work and family benefits area. ( o/ I hope you will find this report useful as you develop plans...Xiii OVERVIEW "Cafeteria" Benefits : Conclusions: The Government does not offer a "cafeteria" As an employer , the Federal Government has a benefits

Total Quality Management: Good Enough for Government Work

DTIC Science & Technology

1992-10-01

expectations. This monograph consists of two basic parts. The first part reviews the quality movement in the United States from the time of the industrial ... revolution up to and including strategic quality management. It will help readers understand how quality developed over the years and why particular

Russian Space Agency research and development program for Aerospace Plane combined propulsion systems ('OREL-2-1' R&D)

NASA Astrophysics Data System (ADS)

Lanshin, A.; Sosounov, V.

The 'OREL-2-1' R&D program - 'Development of Combined Propulsion Systems for Advanced Reusable Space Transportation Systems (RSTS) Using Atmospheric Air as an Oxidizer' is being conducted in 1993-1995 according to the order of the Russian Space Agency (RSA). This work is part of the complex 'OREL' R&D program - 'Complex Investigations for RSTS Development preferable Directions Basis and Making of the Scientific and Technical Experience for the RSTS Creation' at which the TsNIIMash, TsAGI and NIITP side by side the Central Institute of Aviation Motors (CIAM) are the lead organizations of the four work parts. The 'OREL-2-1' R&D program and some of its results of 1993 are described briefly in this paper.

Curriculum Development as Continuing Teacher Education.

ERIC Educational Resources Information Center

Laurenze, Andreas

1979-01-01

Reports on the curriculum development process used as part of teacher education, identifying problems of teacher time and effort, relationship to the practical demands of classroom teaching, and links with other aspects of teacher's work. (Author/CK)

Development of a non-piston MR suspension rod for variable mass systems

NASA Astrophysics Data System (ADS)

Deng, Huaxia; Han, Guanghui; Zhang, Jin; Wang, Mingxian; Ma, Mengchao; Zhong, Xiang; Yu, Liandong

2018-06-01

The semi-active suspension systems for variable mass systems require long work stroke and variable damping, while the currently piston structure limits the work stroke for the magnetorheological (MR) dampers. The main work of this paper is to design a semi-active non-piston MR (NPMR) suspension rod for the reduction of the vibration of an automatic impeller washing machine, which is a typical variable mass system. The designed suspension rod locates in the suspension system that links the internal tub to the washing machine cabinet. The NPMR suspension rod includes a MR part and a air part. The MR part can provide low initial damping force and the unlimited work stroke compared with the piston MR damper. The hysteretic response tests and vibration performance evaluation with different loadings are conducted to verify the dynamic performance for the designed rod. The measured damping force of the MR part varies from 5 to 20 N. Studies of dehydration mode experiments of the washing machine indicate that its vibration acceleration with the NPMR suspension rods can reduce to half of the original passive ones in certain conditions.

Analysis of satellite multibeam antennas’ performances

NASA Astrophysics Data System (ADS)

Sterbini, Guido

2006-07-01

In this work, we discuss the application of frequency reuse's concept in satellite communications, stressing the importance for a design-oriented mathematical model as first step for dimensioning antenna systems. We consider multibeam reflector antennas. The first part of the work consists in reorganizing, making uniform and completing the models already developed in the scientific literature. In doing it, we adopt the multidimensional Taylor development formalism. For computing the spillover efficiency of the antenna, we consider different feed's illuminations and we propose a completely original mathematical model, obtained by the interpolation of simulator results. The second part of the work is dedicated to characterize the secondary far field pattern. Combining this model together with the information on the cellular coverage geometry is possible to evaluate the isolation and the minimum directivity on the cell. As third part, in order to test the model and its analysis and synthesis capabilities, we implement a software tool that helps the designer in the rapid tuning of the fundamental quantities for the optimization of the performance: the proposed model shows an optimum agreement with the results of the simulations.

Advanced End-to-end Simulation for On-board Processing (AESOP)

NASA Technical Reports Server (NTRS)

Mazer, Alan S.

1994-01-01

Developers of data compression algorithms typically use their own software together with commercial packages to implement, evaluate and demonstrate their work. While convenient for an individual developer, this approach makes it difficult to build on or use another's work without intimate knowledge of each component. When several people or groups work on different parts of the same problem, the larger view can be lost. What's needed is a simple piece of software to stand in the gap and link together the efforts of different people, enabling them to build on each other's work, and providing a base for engineers and scientists to evaluate the parts as a cohesive whole and make design decisions. AESOP (Advanced End-to-end Simulation for On-board Processing) attempts to meet this need by providing a graphical interface to a developer-selected set of algorithms, interfacing with compiled code and standalone programs, as well as procedures written in the IDL and PV-Wave command languages. As a proof of concept, AESOP is outfitted with several data compression algorithms integrating previous work on different processors (AT&T DSP32C, TI TMS320C30, SPARC). The user can specify at run-time the processor on which individual parts of the compression should run. Compressed data is then fed through simulated transmission and uncompression to evaluate the effects of compression parameters, noise and error correction algorithms. The following sections describe AESOP in detail. Section 2 describes fundamental goals for usability. Section 3 describes the implementation. Sections 4 through 5 describe how to add new functionality to the system and present the existing data compression algorithms. Sections 6 and 7 discuss portability and future work.

Managing Home and Work Responsibilities. Secondary Learning Guide 9. Project Connect. Linking Self-Family-Work.

ERIC Educational Resources Information Center

Emily Hall Tremaine Foundation, Inc., Hartford, CT.

This competency-based secondary learning guide on managing home and work responsibilities is part of a series that are adaptations of guides developed for adult consumer and homemaking education programs. The guides provide students with experiences that help them learn to do the following: make decisions; use creative approaches to solve…

Working to Make It Work: The Role of Parents in the Youth Mentoring Process

ERIC Educational Resources Information Center

Spencer, Renee; Basualdo-Delmonico, Antoinette; Lewis, Terrence O.

2011-01-01

Theoretical and empirical work on youth mentoring relationships has been largely focused on the mentor-youth dyad, with little attention to the larger context within which such relationships form and develop. The perspectives of parents have been absent for the most part from the mentoring literature to date. In-depth, semistructured, qualitative…

Senior Managers' and Recent Graduates' Perceptions of Employability Skills for Health Services Management

ERIC Educational Resources Information Center

Messum, Diana; Wilkes, Lesly; Peters, Cath; Jackson, Debra

2017-01-01

If work-integrated learning (WIL) is intended by universities to meet the demand for work-ready graduates, identification of skill requirements for development on placements is a critical part of the learning process. Health services management specific employability skills perceived to be important by managers and recent graduates working in the…

Putting Math Into Family Life: What's Possible for Working Parents?

ERIC Educational Resources Information Center

Kliman, Marlene; Mokros, Jan; Parkes, Alana

A set of parent-child math activities designed to help busy, working parents do math with their children as part of everyday situations such as cleaning up and making dinner included basic steps, variations, and information on working with children were developed for families with elementary grades children aged approximately 5 to 11 and…

Toward Solutions: The Work of the Biology Action-Research Group. Learning in Science Project. Working Paper No. 29.

ERIC Educational Resources Information Center

Boe, Robyn; And Others

Many students, even after formal science instruction, have not developed a scientifically acceptable concept of "living,""animal," or "plant." Therefore, as part of the action-research phase of the Learning in Science Project, a working group was formed to explore (with teachers) some possible strategies aimed at…

Changing Times: The Use of Reduced Work Time Options in the United States.

ERIC Educational Resources Information Center

Olmsted, Barney

1983-01-01

This article addresses the increase in voluntary reduced work time arrangements that have developed in the United States in response to growing interest in alternatives to the standardized approach to scheduling. Permanent part-time employment, job sharing, and voluntary reduced work time plans are defined, described and, to a limited extent,…

Balancing Work and Family. Secondary Learning Guide 5. Project Connect. Linking Self-Family-Work.

ERIC Educational Resources Information Center

Emily Hall Tremaine Foundation, Inc., Hartford, CT.

This competency-based secondary learning guide on balancing work and family is part of a series that are adaptations of guides developed for adult consumer and homemaking education programs. The guides provide students with experiences that help them learn to do the following: make decisions; use creative approaches to solve problems; establish…

Radio for Education and Development: Case Studies, Volume I. World Bank Staff Working Paper No. 266.

ERIC Educational Resources Information Center

Spain, Peter L.; And Others

Six papers describe use of the radio for in-school and out-of-school formal education in this first volume of working papers on how radio can and is being used for education and development. Part one on in-school education contains: a Nicaraguan project to teach mathematics to first grade children (including curriculum, materials, teacher…

Mothers’ Part-time Employment: Associations with Mother and Family Well-being

PubMed Central

Buehler, Cheryl; O’Brien, Marion

2011-01-01

The associations between mothers’ part-time employment and mother well-being, parenting, and family functioning were examined using seven waves of the NICHD Study of Early Child Care and Youth Development data (N = 1,364), infancy through middle childhood. Concurrent comparisons were made between families in which mothers were employed part time and both those in which mothers were not employed and those in which mothers were employed full time. Using multivariate analysis of covariance with extensive controls, results indicated that mothers employed part time had fewer depressive symptoms during the infancy and preschool years and better self-reported health at most time points than did nonemployed mothers. Across the time span studied, mothers working part time tended to report less conflict between work and family than those working full time. During their children’s preschool years, mothers employed part time exhibited more sensitive parenting than did other mothers, and at school age were more involved in school and provided more learning opportunities than mothers employed full time. Mothers employed part time reported doing a higher proportion of child care and housework than mothers employed full time. Part-time employment appears to have some benefits for mothers and families throughout the child-rearing years. PMID:22004432

Is work in education child's play? Understanding risks to educators arising from work organization and design of work spaces.

PubMed

Seifert, Ana María

2007-01-01

The educational sector exposes its primarily female work force to numerous psychosocial risk factors. At the request of the education workers', ergonomists developed a participatory research project in order to understand the determinants of the difficulties experienced by special education technicians. These technicians work with students presenting behavioral and learning difficulties as well as developmental and mental health problems. Eighteen technicians were interviewed and the work of seven technicians and two teachers was observed. Technicians prevent and manage crisis situations and help students acquire social skills. Coordination with teachers is made difficult by the fact that most technicians work part time, part year, and many technicians' work areas and classrooms are physically distant one from another. Most technicians change schools each year and must continually reconstruct work teams. Management strategies and poorly adapted working spaces can have important repercussions on coordination among educators and on technicians' capacity to help students and prevent aggressive behavior.

Animator

ERIC Educational Resources Information Center

Tech Directions, 2008

2008-01-01

Art and animation work is the most significant part of electronic game development, but is also found in television commercials, computer programs, the Internet, comic books, and in just about every visual media imaginable. It is the part of the project that makes an abstract design idea concrete and visible. Animators create the motion of life in…

Part-Time Higher Education: Employer Engagement under Threat?

ERIC Educational Resources Information Center

Mason, Geoff

2014-01-01

Employer support for employees who are studying part-time for higher education qualifications constitutes a form of indirect employer engagement with higher education institutions that has contributed strongly to the development of work-related skills and knowledge over the years. However, this form of employer engagement with higher education…

Australian radiation therapy – Part two: Reflections of the past, the present, the future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merchant, Susan; Curtin Health Innovative Research Institute, Curtin University, Perth, WA; Halkett, Georgia

2014-02-15

Introduction: Documentation on the history of Australian radiotherapy is limited. This study provides radiation therapists' (RTs) perspectives of the people, workplace, and work practices in Australian radiotherapy centres from 1960 onwards. It provides a follow-up to our previous study: Australian radiation therapy: An overview – Part one, which outlines the history and development of radiotherapy from conception until present day. Methods: Four focus groups were conducted on separate occasions in 2010, one in South Australia and three in Victoria, Australia. Participants who worked in radiotherapy were purposively selected to ensure a range of experience, age, and years of work. Results:more » From a RT perspective, radiotherapy has evolved from a physically demanding ‘hands-on’ work environment, often with unpleasant sights and smells of disease, to a more technology-driven workplace. Conclusion: Understanding these changes and their subsequent effects on the role of Australian RTs will assist future directions in advanced role development.« less

Image Transmission via Spread Spectrum Techniques. Part A

DTIC Science & Technology

1976-01-01

Code 408 DR. EDWIN H. WRENCH (714-225-6871) Code 408 and HARPER J. WHITEHOUSE (714:225-6315), Code 4002 Naval Undersea Center San Diego. California...progress report appears in two parts. Part A is a summary of work done in support of this program at the Naval Undersea Center. Part B contains final...a technical description of the bandwidth compression system developed at the Naval Undersea Center. This paper is an excerpt from the specifications

Worker Education.

ERIC Educational Resources Information Center

Yiziang, Zeng; And Others

1988-01-01

Describes worker education in China as an important part of the national educational plan and an indispensible foundation for the work of developing enterprisers. Basic tasks are the development of the mind, preparation of specialists, improving workers, and modernization of socialist enterprises. (JOW)

Developing an Extended Model of the Relation between Work Motivation and Health as Affected by the Work Ability as Part of a Corporate Age Management Approach

PubMed Central

Feißel, Annemarie; Peter, Richard; Swart, Enno

2018-01-01

Due to demographic changes, the employee structure in companies is changing dramatically. It will be necessary to offer employees suitable, age-adequate jobs. As one of its foremost goals, optimized business management strategies must create conditions for guaranteeing a person’s health, work ability, and work motivation. In the context of corporate age management concepts, the literature recommends to retain and integrate older employees in the organization. This paper aims at developing an extended model of the relation between work motivation and health as affected by work ability and at deriving a host of measures that enterprises can apply as part of a corporate age management policy to counteract the impact of demographic changes. The model also takes into consideration factors influencing the relation between work motivation and health as affected by work ability (socio-demographic parameters, occupation, work-related stress). Additionally, the extended model translates the literature-based results into a corporate setting by way of a corporate age management program. The model comprises a process focusing on retaining and promoting work ability in order to maintain or boost work motivation and health. The host of measures presented serves as a basis to preventively counter demographic change on an individual, interpersonal, and structural level. PMID:29673218

Developing an Extended Model of the Relation between Work Motivation and Health as Affected by the Work Ability as Part of a Corporate Age Management Approach.

PubMed

Feißel, Annemarie; Peter, Richard; Swart, Enno; March, Stefanie

2018-04-17

Due to demographic changes, the employee structure in companies is changing dramatically. It will be necessary to offer employees suitable, age-adequate jobs. As one of its foremost goals, optimized business management strategies must create conditions for guaranteeing a person’s health, work ability, and work motivation. In the context of corporate age management concepts, the literature recommends to retain and integrate older employees in the organization. This paper aims at developing an extended model of the relation between work motivation and health as affected by work ability and at deriving a host of measures that enterprises can apply as part of a corporate age management policy to counteract the impact of demographic changes. The model also takes into consideration factors influencing the relation between work motivation and health as affected by work ability (socio-demographic parameters, occupation, work-related stress). Additionally, the extended model translates the literature-based results into a corporate setting by way of a corporate age management program. The model comprises a process focusing on retaining and promoting work ability in order to maintain or boost work motivation and health. The host of measures presented serves as a basis to preventively counter demographic change on an individual, interpersonal, and structural level.

Development of an Integrated, Computer-Based Bibliographical Data System for a Large University Library. Annual Report to the National Science Foundation from the University of Chicago Library, 1966/67.

ERIC Educational Resources Information Center

Fussler, Herman; Payne, Charles T.

Part I is a discussion of the following project tasks: A) development of an on-line, real-time bibliographic data processing system; B) implementation in library operations; C) character sets; D) Project MARC; E) circulation; and F) processing operation studies. Part II is a brief discussion of efforts to work out cooperative library systems…

Simulation of springback and microstructural analysis of dual phase steels

NASA Astrophysics Data System (ADS)

Kalyan, T. Sri.; Wei, Xing; Mendiguren, Joseba; Rolfe, Bernard

2013-12-01

With increasing demand for weight reduction and better crashworthiness abilities in car development, advanced high strength Dual Phase (DP) steels have been progressively used when making automotive parts. The higher strength steels exhibit higher springback and lower dimensional accuracy after stamping. This has necessitated the use of simulation of each stamped component prior to production to estimate the part's dimensional accuracy. Understanding the micro-mechanical behaviour of AHSS sheet may provide more accuracy to stamping simulations. This work can be divided basically into two parts: first modelling a standard channel forming process; second modelling the micro-structure of the process. The standard top hat channel forming process, benchmark NUMISHEET'93, is used for investigating springback effect of WISCO Dual Phase steels. The second part of this work includes the finite element analysis of microstructures to understand the behaviour of the multi-phase steel at a more fundamental level. The outcomes of this work will help in the dimensional control of steels during manufacturing stage based on the material's microstructure.

Advanced Aerodynamic Design of Passive Porosity Control Effectors

NASA Technical Reports Server (NTRS)

Hunter, Craig A.; Viken, Sally A.; Wood, Richard M.; Bauer, Steven X. S.

2001-01-01

This paper describes aerodynamic design work aimed at developing a passive porosity control effector system for a generic tailless fighter aircraft. As part of this work, a computational design tool was developed and used to layout passive porosity effector systems for longitudinal and lateral-directional control at a low-speed, high angle of attack condition. Aerodynamic analysis was conducted using the NASA Langley computational fluid dynamics code USM3D, in conjunction with a newly formulated surface boundary condition for passive porosity. Results indicate that passive porosity effectors can provide maneuver control increments that equal and exceed those of conventional aerodynamic effectors for low-speed, high-alpha flight, with control levels that are a linear function of porous area. This work demonstrates the tremendous potential of passive porosity to yield simple control effector systems that have no external moving parts and will preserve an aircraft's fixed outer mold line.

18 CFR 12.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... work; (iv) Unusual concrete deterioration or cracking, including development of new cracks or the... ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT SAFETY OF WATER POWER PROJECTS AND PROJECT WORKS General Provisions § 12.3 Definitions. (a) General rule. For purposes of this part, terms defined in section 3 of the...

Retirement: An Ego Alien View

ERIC Educational Resources Information Center

Frank, Helen

1977-01-01

Since knowledge of ego development can be used in professional work, a needed classification of attitudes toward the work ethic is advanced. A radical departure from our retirement policy towards those over 65 years of age requires additional competence on the part of counselors in the field of aging. (Author)

Detonation Jet Engine. Part 2--Construction Features

ERIC Educational Resources Information Center

Bulat, Pavel V.; Volkov, Konstantin N.

2016-01-01

We present the most relevant works on jet engine design that utilize thermodynamic cycle of detonative combustion. Detonation engines of various concepts, pulse detonation, rotational and engine with stationary detonation wave, are reviewed. Main trends in detonation engine development are discussed. The most important works that carried out…

Skills Development for the Knowledge Economy in Asia: Some Conclusions from the OECD Experience

ERIC Educational Resources Information Center

Martinez-Fernandez, Cristina; Weyman, Tamara

2014-01-01

The development of a knowledge-based economy relies greatly on developing the skills and education needed for inclusive and sustainable development so that growth will reach all parts of the society. Addressing skills development for all is challenging for all OECD countries; Asian economies are working towards developing integrated pathways of…

Framework for a New Political Praxis: "Respeto, Dignidad y Conocimiento"

ERIC Educational Resources Information Center

Guajardo, Francisco; Guajardo, Miguel; Oliver, John; Keawe, Lia O'Neill M. A.

2012-01-01

This article uses story as a process to highlight the work in a South Texas community that focuses on the education of youth and the development of community. The work is guided by a new consciousness of place, community engagement, and identity formation. The work is local, but breaking the isolation of youth, families, and ideas has been part of…

Listening as Translation: Reflections on Professional Development Work in a Cross-Cultural Setting

ERIC Educational Resources Information Center

Schultz, Katherine; Smulyan, Lisa

2007-01-01

As part of a campus-wide response by the University of Pennsylvania to the large-scale disaster caused by the earthquake and tsunami in South Asia, a team of teacher educators and graduate students worked with teachers, teacher educators, and administrators in Banda Aceh, Indonesia during July of 2005 and 2006. Working in Indonesia highlighted for…

Balancing Life & Work: The Humanities as an Essential Part of Career Exploration.

ERIC Educational Resources Information Center

Haynes, Leslie; Blake, Amy

This guide explains why the humanities are important in school-to-work systems and how high schools can develop one of two types of programs integrating humanities coursework and career exploration: the study of humanities as a way to enrich individuals' work lives and the study of humanities as career fields in their own right. The first half of…

Module 3: Workplace Policy, Practice and Culture--Employer and Employee Perspectives. Work-Family Curriculum Guide

ERIC Educational Resources Information Center

Kossek, Ellen Ernst; Leana, Carrie; MacDermid, Shelley; Pitt-Catsouphes, Marcie; Raskin, Patricia; Secret, Mary; Sweet, Stephen

2006-01-01

The contents of this module have been prepared to address some of challenges associated with teaching about work-family issues from a human resource management and employment perspective. The goals of this module are: (1) To develop an understanding that work-family policies are part of a human resource management system and the employment…

Development of an instrument for assessing workstyle in checkout cashier work (BAsIK).

PubMed

Kjellberg, Katarina; Palm, Peter; Josephson, Malin

2012-01-01

Checkout cashier work consists of handling a large number of items during a work shift, which implies repetitive movements of the shoulders, arms and hands/wrists, and a high work rate. The work is associated with a high prevalence of disorders in the neck and upper extremity. The concept of workstyle explains how ergonomic and psychosocial factors interact in the development of work-related upper extremity disorders. The aim of the project was to develop an instrument for the occupational health services to be used in the efforts to prevent upper extremity disorders in checkout cashier work. The instrument is based on the workstyle concept and is intended to be used as a tool to identify high-risk workstyle and needs for interventions, such as training and education. The instrument, BAsIK, consists of four parts; a questionnaire about workstyle, an observation protocol for work technique, a checklist about the design of the checkout and a questionnaire about work organization. The instrument was developed by selecting workstyle items developed for office work and adapting them to checkout cashier work, discussions with researchers and ergonomists, focus-group interviews with cashiers, observations of video recordings of cashiers, and studies of existing guidelines and checklists.

Approaches to Working with Children, Young People and Families for Traveller, Irish Traveller, Gypsy, Roma and Show People Communities. A Literature Review Report for the Children's Workforce Development Council

ERIC Educational Resources Information Center

Robinson, Mark; Martin, Kerry

2008-01-01

The Children's Workforce Development Council (CWDC) commissioned this literature review as the first part of a project exploring issues around and approaches to working with Travellers, Irish Travellers, Gypsies, Roma and Showpeople, and the support, training and other programs available to staff involved. The project is intended to contribute to…

The relationships among part-time work, work-family interference, and well-being.

PubMed

van Rijswijk, Karen; Bekker, Marrie H J; Rutte, Christel G; Croon, Marcel A

2004-10-01

The authors investigated the effect of part-time work on work-family interference and well-being among 160 part-time and 29 full-time employed mothers (with a partner) working at 2 insurance companies in the Netherlands. The authors controlled for working part time as a strategy for reducing work-family imbalance and found that part-time work was associated with a lower level of work-to-family interference. Also, high levels of work-family interference were associated with diminished well-being. Work-to-family interference played a mediating role in the relationship between part-time work and well-being. Results indicate that part-time jobs can enhance the work-family balance not only for those explicitly choosing part-time employment as a means to reduce work-family imbalance but also for other employees.

Pediatricians Working Part-Time Has Plateaued.

PubMed

Cull, William L; Frintner, Mary Pat; O'Connor, Karen G; Olson, Lynn M

2016-04-01

To examine trends in pediatricians working part-time and residents seeking part-time work and to examine associated characteristics. The American Academy of Pediatrics (AAP) Periodic Survey of Fellows and the AAP Annual Survey of Graduating Residents were used to examine part-time employment. Fourteen periodic surveys were combined with an overall response rate of 57%. Part-time percentages were compared for surveys conducted from 2006-2009 and 2010-2013. The AAP Annual Surveys of Graduating Residents (combined response rate = 60%) from 2006-2009 were compared with 2010-2013 surveys for residents seeking and obtaining part-time positions following training. Multivariable logistic regression models identified characteristics associated with part-time work. Comparable percentages of pediatricians worked part-time in 2006-2009 (23%) and 2010-2013 (23%). There was similarly no statistically significant difference in residents seeking part-time work (30%-28%), and there was a slight decline in residents accepting part-time work (16%-13%, aOR .75, 95% CI .56-.96). Increases in working part-time were not found for any subgroups examined. Women consistently were more likely than men to work part-time (35% vs 9%), but they showed different patterns of part-time work across age. Women in their 40s (40%) were more likely than other women (33%) and men in their 60s (20%) were more likely than other men (5%) to work part-time. There has been a levelling off in the number of pediatricians working part-time and residents seeking part-time work. Overall, women remain more likely to work part-time, although 1 in 5 men over 60 work part-time. Copyright © 2016 Elsevier Inc. All rights reserved.

A Mechanical Harmony to NASA's Webb Telescope Sunshield

NASA Image and Video Library

2017-12-08

NASA's James Webb Space Telescope has a giant custom-built, kite-shaped sunshield driven by mechanics that will fold and unfold with a harmonious synchronicity 1 million miles from Earth. Like a car, many mechanical pieces in the Webb telescope's sunshield will work together to open it from its stored folded position in the rocket that will carry it into space. According to car manufacturers, a single car can have about 30,000 parts, counting every part down to the smallest screws. Like getting all of the parts in a car to operate together, the mechanical parts of the sunshield have to work in the same way. The sunshield support structure contains well over 7,000 flight parts, including springs, bearings, pulleys, magnets, etc. In addition, the sunshield has hundreds of custom fabricated pieces. Most mechanical pieces were developed exclusively for the sunshield, with a few from existing designs. Read more: go.nasa.gov/2cXcQMT

Making a Difference: Outcomes of a Decade of Assessment in Higher Education. The Jossey-Bass Higher and Adult Education Series.

ERIC Educational Resources Information Center

Banta, Trudy W.; And Others

This five-part volume presents a comprehensive collection of 24 accounts of campus assessment practices by the individuals who developed and implemented them. Part 1 presents the stories of five institutions in which assessment has effected a marked change in the way faculty and staff do their work. Part 2 describes some of the broad approaches to…

The Hidden Benefits of Part-Time Higher Education Study to Working Practices: Is There a Case for Making Them More Visible?

ERIC Educational Resources Information Center

Callender, Claire; Little, Brenda

2015-01-01

Within the UK, part-time study is now seen as important in meeting wider government objectives for higher education (HE) and for sustainable economic growth through skills development. Yet, measures to capture the impact of HE may not be wholly appropriate to part-time study. In particular, the continuing focus on tangible, economic measures may…

Design and Development of a Novel Knudsen Compressor as a Part of a Joule-Thomson Cryocooler

NASA Astrophysics Data System (ADS)

Muthuvijayan, Indra; Antelius, Mikael; Björneklett, Are; Nilsson, Peter; Thorslund, Robert

2017-11-01

This paper presents the design and development of a novel Knudsen compressor, with no moving parts, as a part of a Joule-Thomson cryocooler. The compressor works by using the Knudsen diffusion principle and includes a combination of graphene-based layers and Knudsen membranes in a particular fashion to pressurize the fluid. The Knudsen membrane for this application was selected by testing several commercially available materials. Prototypes of single stage and a multistage compressors are presented together with experimental evaluations. Insights on a Tube-in-Tube heat exchanger, as another part a the Joule-Thomson cryocooler, intended to integrate with the Knudsen compressor, are also presented.

[Information and communication technologies in nursing].

PubMed

Kern, Josipa

2014-03-01

The application of information and communication technologies (ICT) in nursing is an integral part of the educational curriculum at the university graduate level of nursing, but also part of scientific and professional meetings on nursing informatics. As part of seminars, students are obliged to choose e-health topics from their working environment, to show them and discuss with colleagues. The same is happening at meeting on nursing informatics. Selected papers on the issue are chosen to cover information literacy of nurses, examples of e-nursing, ICT infrastructure, the possible future developments and organizational aspects of e-health at healthcare institutions. Among others, special attention is paid to improving the quality of work in nursing.

Aspect-Oriented Monitoring of C Programs

NASA Technical Reports Server (NTRS)

Havelund, Klaus; VanWyk, Eric

2008-01-01

The paper presents current work on extending ASPECTC with state machines, resulting in a framework for aspect-oriented monitoring of C programs. Such a framework can be used for testing purposes, or it can be part of a fault protection strategy. The long term goal is to explore the synergy between the fields of runtime verification, focused on program monitoring, and aspect-oriented programming, focused on more general program development issues. The work is inspired by the observation that most work in this direction has been done for JAVA, partly due to the lack of easily accessible extensible compiler frameworks for C. The work is performed using the SILVER extensible attribute grammar compiler framework, in which C has been defined as a host language. Our work consists of extending C with ASPECTC, and subsequently to extend ASPECTC with state machines.

Electronics for Piezoelectric Smart Structures

NASA Technical Reports Server (NTRS)

Warkentin, D. J.; Tani, J.

1997-01-01

This paper briefly presents work addressing some of the basic considerations for the electronic components used in smart structures incorporating piezoelectric elements. After general remarks on the application of piezoelectric elements to the problem of structural vibration control, three main topics are described. Work to date on the development of techniques for embedding electronic components within structural parts is presented, followed by a description of the power flow and dissipation requirements of those components. Finally current work on the development of electronic circuits for use in an 'active wall' for acoustic noise is introduced.

Managing Highway Maintenance: Standards for Maintenance Work, Part 1, Unit 8, Level 2.

ERIC Educational Resources Information Center

Federal Highway Administration (DOT), Washington, DC. Offices of Research and Development.

Part of the series "Managing Highway Maintenance," the unit is about maintenance standards and is designed for superintendents and senior foremen who are responsible for scheduling and controlling routine maintenance. It describes different kinds of standards, why and how standards are developed, and how standards are to be used and…

New Technologies and Training in Metalworking.

ERIC Educational Resources Information Center

Belitsky, A. Harvey

This report reviews the role of technological factors in metalworking and the training required to adapt to new metalworking technologies. Focus is on whether firms that have adopted the new technologies have encountered obstacles in training and developing the skills of their work forces. The report is organized in three parts. Parts I and II…

Teaching Rhythmic Gymnastics: A Developmentally Appropriate Approach.

ERIC Educational Resources Information Center

Palmer, Heather C.

This book is designed to guide teachers through the process of creating a developmentally appropriate rhythmic gymnastics program for children age 5-11. Rhythmic gymnastics programs develop fitness, inspire creativity, and allow all children to work at their own level. The book features 10 chapters in two parts. Part 1, "Getting Started on a…

An App for the Cathedral in Freiberg--An Interdisciplinary Project Seminar

ERIC Educational Resources Information Center

Kröber, Cindy; Münster, Sander

2014-01-01

This project seminar aims at creating and evaluating a manual for interdisciplinary projects as part of a learning process. Working together, pedagogies and students from different disciplines assess tools and recommendations for successful collaborations while developing an app for the cathedral in Freiberg. As part of the project the students…

Developing Reflexive Identities through Collaborative, Interdisciplinary and Precarious Work: The Experience of Early Career Researchers

ERIC Educational Resources Information Center

Enright, Bryony; Facer, Keri

2017-01-01

This paper explores the experiences of 24 Early Career Researchers working in interdisciplinary and precarious employment conditions in which they are managing collaborations with multiple partners beyond the university as part of the AHRC's "Connected Communities" Programme. These conditions emerge from conflicting sources--from…

Spanish for Agricultural Purposes: The Video Episodes.

ERIC Educational Resources Information Center

Mainous, Bruce H.; And Others

The transcripts of dialogues from videotape recordings were developed, along with accompanying language laboratory material, as part of a one-semester course in Spanish for North American agriculture specialists preparing to work in Latin America. Included are 48 episodes covering such topics as: working with a local Spanish-speaking counterpart,…

18 CFR 4.37 - Rules of preference among competing applications.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Application for Preliminary Permit, License or Exemption... application for a preliminary permit and an accepted application for a license propose project works that... for project works that would develop, conserve, and utilize, in whole or in part, the same water...

18 CFR 4.37 - Rules of preference among competing applications.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Application for Preliminary Permit, License or Exemption... application for a preliminary permit and an accepted application for a license propose project works that... for project works that would develop, conserve, and utilize, in whole or in part, the same water...

18 CFR 4.37 - Rules of preference among competing applications.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Application for Preliminary Permit, License or Exemption... application for a preliminary permit and an accepted application for a license propose project works that... for project works that would develop, conserve, and utilize, in whole or in part, the same water...

18 CFR 4.37 - Rules of preference among competing applications.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Application for Preliminary Permit, License or Exemption... application for a preliminary permit and an accepted application for a license propose project works that... for project works that would develop, conserve, and utilize, in whole or in part, the same water...

18 CFR 4.37 - Rules of preference among competing applications.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Application for Preliminary Permit, License or Exemption... application for a preliminary permit and an accepted application for a license propose project works that... for project works that would develop, conserve, and utilize, in whole or in part, the same water...

Effective Discipline in the Home and School.

ERIC Educational Resources Information Center

Painter, Genevieve; Corsini, Raymond J.

Based originally on the work of the Austrian psychiatrist, Alfred Adler, work which was further developed by Rudolph Dreikurs, this book Dreikurs, this book offers solutions to specific child discipline problems. Part I focuses on effective discipline in the home. These topics are covered: fundamentals of practical parenting; problems of routine…

Model for the formation of silicon carbide from the pyrolysis of dichlorodimethylsilane in hydrogen. I - Silicon formation from chlorosilanes. II - Silicon carbide formation from silicon and methane

NASA Technical Reports Server (NTRS)

Cagliostro, Domenick E.; Riccitiello, Salvatore R.

1993-01-01

In the first part of this work, a model is developed for the deposition of silicon from the reduction of silicon tetrachloride with hydrogen in a tubular reactor at 700-1100 C, at atmospheric pressure. The model is based on gas chromatography of the volatile products of the reaction, followed by gravimetric analysis of total Si deposition on the tube. In the second part of this work, a model is developed for the case of SiC deposition from the pyrolysis of dichlorodimethylsilane in hydrogen under the same reactor conditions. The rate constants derived from a nonlinear regression analysis are reported.

Material Analysis and Identification

NASA Technical Reports Server (NTRS)

2004-01-01

KeyMaster Technologies, Inc., develops and markets specialized, hand-held X-ray fluorescence (XRF) instruments and unique tagging technology used to identify and authenticate materials or processes. NASA first met with this Kennewick, Washington-based company as the Agency began seeking companies to develop a hand-held instrument that would detect data matrix symbols on parts covered by paint and other coatings. Since the Federal Aviation Administration was also searching for methods to detect and eliminate the use of unapproved parts, it recommended that NASA and KeyMaster work together to develop a technology that would benefit both agencies.

For a Psychosocial Approach to Decent Work

PubMed Central

Pouyaud, Jacques

2016-01-01

The notion of decent work was developed by the International Labour Organization 20 years ago. The notion is now well known by lawyers, economists, and sociologists, and even if it appears difficult to define it clearly, it constitutes a useful general framework with which to think of the relationships between policy practices, work market globalization, and human rights principles. The fields of career guidance and counseling psychology are highly concerned by questions of social justice and human rights that people experience through work. Career choices being made in a liquid and unstable society, incompatibility between individualist values and collective work issues, increasing psychological health problems at work, work-family balance in precarious job situations, the growing necessity of mobility, adaptability or flexibility… all of these questions are at the heart of current career counseling practices, and concern the decent work debate. Nevertheless, the notion of decent work is not well developed in the field of vocational psychology. Despite its relevance, it is difficult to operationalize the policy and human rights principles during career counseling sessions. The article aims to explore the usefulness of the concept for career counselors, and to propose a psychosocial framework that incorporates decent work in career counseling practices. The first part of this article presents the theoretical bases of the notion of decent work and their possible use in the field of psychology. It deals with the necessity of a multilevel and psychosocial perspective, that takes into account both objective and subjective dimensions of decent work. The second part focuses on a case study illustrating how the notion of decent work emerges during counseling sessions. Four levels of the work experience linked with subjective and objective dimensions of decent work are explored; the personal level, the activity level, the collective level, and the social level. Finally, the third part discusses and proposes a framework based on the analysis of the four dimensions of work (activity, trade, others and society) in order to integrate a psychosocial view of decent work into career counseling. PMID:27064844

EVALUATION OF FGD DRY INJECTION SORBENTS AND ADDITIVES - VOLUME 1 - DEVELOPMENT OF HIGH REACTIVITY SORBENTS

EPA Science Inventory

The report discusses recent work addressing lime enhancement by slurrying with siliceous materials and testing in a laboratory packed-bed reactor, as part of EPA's efforts to develop low cost, retrofit flue gas cleaning technology, including the development of highly reactive sor...

Getting Results through Learning.

ERIC Educational Resources Information Center

Human Resource Development Council, Washington, DC.

This handbook, which was developed for federal managers, explains how low-cost and no-cost training methods developed in the private sector and the services and support available from federal human resource development (HRD) offices can be used to build a smarter and more productive work force. Presented in part 1 are the following: seven…

Why are some medical specialists working part-time, while others work full-time?

PubMed

de Jong, Judith D; Heiligers, Phil; Groenewegen, Peter P; Hingstman, Lammert

2006-10-01

Although medical specialists primarily work full-time, part-time work is on the increase, a trend that can be found worldwide. This article seeks to answer the question why some medical specialists work part-time, while others do not although they are willing to work part-time. Two approaches are used. First, we studied reported reasons and as a second approach we used a theoretical model, based on goal-directed behavior and restrictions. A questionnaire was sent to all internists (N=817), surgeons (N=693) and radiologists (N=621) working in general hospitals in The Netherlands. Questions were asked about personal traits, characteristics of the work situation, and motives for working full-time or part-time. Frequencies were reported for the reasons given, and multilevel analysis was used to test the theoretical model. The results show that the reported reasons for working part-time and being willing to work part-time are the same: the importance of family and leisure pursuits. The second approach showed that medical specialists working part-time tend to be female, older, and have children below the age of five. Surgeons are least likely to work part-time. A willingness to work part-time is purely individual and not related to any of the explanatory variables. We conclude that working part-time is related to both professional and personal circumstances. Policy should be aimed at removing the organizational difficulties that obstruct the realization of part-time work. Alternatively, perhaps there should be a change in working hours for all medical specialists. As the majority of all full-time working medical specialists are willing to work part-time, this might indicate that most medical specialists actually prefer "normal" working hours.

Fatigue Risk Management: A Maritime Framework

PubMed Central

Grech, Michelle Rita

2016-01-01

It is evident that despite efforts directed at mitigating the risk of fatigue through the adoption of hours of work and rest regulations and development of codes and guidelines, fatigue still remains a concern in shipping. Lack of fatigue management has been identified as a contributory factor in a number of recent accidents. This is further substantiated through research reports with shortfalls highlighted in current fatigue management approaches. These approaches mainly focus on prescriptive hours of work and rest and include an individualistic approach to managing fatigue. The expectation is that seafarers are responsible to manage and tolerate fatigue as part of their working life at sea. This attitude is an accepted part of a seafarer’s role. Poor compliance is one manifest of this problem with shipboard demands making it hard for seafarers to follow hours of work and rest regulations, forcing them into this “poor compliance” trap. This makes current fatigue management approaches ineffective. This paper proposes a risk based approach and way forward for the implementation of a fatigue risk management framework for shipping, aiming to support the hours of work and rest requirements. This forms part of the work currently underway to review and update the International Maritime Organization, Guidelines on Fatigue. PMID:26840326

Fatigue Risk Management: A Maritime Framework.

PubMed

Grech, Michelle Rita

2016-01-29

It is evident that despite efforts directed at mitigating the risk of fatigue through the adoption of hours of work and rest regulations and development of codes and guidelines, fatigue still remains a concern in shipping. Lack of fatigue management has been identified as a contributory factor in a number of recent accidents. This is further substantiated through research reports with shortfalls highlighted in current fatigue management approaches. These approaches mainly focus on prescriptive hours of work and rest and include an individualistic approach to managing fatigue. The expectation is that seafarers are responsible to manage and tolerate fatigue as part of their working life at sea. This attitude is an accepted part of a seafarer's role. Poor compliance is one manifest of this problem with shipboard demands making it hard for seafarers to follow hours of work and rest regulations, forcing them into this "poor compliance" trap. This makes current fatigue management approaches ineffective. This paper proposes a risk based approach and way forward for the implementation of a fatigue risk management framework for shipping, aiming to support the hours of work and rest requirements. This forms part of the work currently underway to review and update the International Maritime Organization, Guidelines on Fatigue.

Possibilities of the ErgoScope high fidelity work simulator in skill assessment, skill development and vocational aptitude tests of physically disabled persons.

PubMed

Izsó, Lajos; Székely, Ildikó; Dános, László

2015-01-01

The aim of this paper - based on the extensive experiences of the authors gained by using one particular work simulator - is to present some promising possibilities of the application of this (and any other similar) work simulator in the field of skill assessment, skill development and vocational aptitude tests of physically disabled persons. During skill assessment and development, as parts of the therapy, the focus is on the disabled functions. During vocational aptitude tests, however, the focus is already on the functions that remained intact and therefore can be the basis of returning to work. Some factual examples are provided to realize the proposed possibilities in practice.

Lagrangian statistics in compressible isotropic homogeneous turbulence

NASA Astrophysics Data System (ADS)

Yang, Yantao; Wang, Jianchun; Shi, Yipeng; Chen, Shiyi

2011-11-01

In this work we conducted the Direct Numerical Simulation (DNS) of a forced compressible isotropic homogeneous turbulence and investigated the flow statistics from the Lagrangian point of view, namely the statistics is computed following the passive tracers trajectories. The numerical method combined the Eulerian field solver which was developed by Wang et al. (2010, J. Comp. Phys., 229, 5257-5279), and a Lagrangian module for tracking the tracers and recording the data. The Lagrangian probability density functions (p.d.f.'s) have then been calculated for both kinetic and thermodynamic quantities. In order to isolate the shearing part from the compressing part of the flow, we employed the Helmholtz decomposition to decompose the flow field (mainly the velocity field) into the solenoidal and compressive parts. The solenoidal part was compared with the incompressible case, while the compressibility effect showed up in the compressive part. The Lagrangian structure functions and cross-correlation between various quantities will also be discussed. This work was supported in part by the China's Turbulence Program under Grant No.2009CB724101.

Assessing and addressing moral distress and ethical climate Part II: neonatal and pediatric perspectives.

PubMed

Sauerland, Jeanie; Marotta, Kathleen; Peinemann, Mary Anne; Berndt, Andrea; Robichaux, Catherine

2015-01-01

Moral distress remains a pervasive and, at times, contested concept in nursing and other health care disciplines. Ethical climate, the conditions and practices in which ethical situations are identified, discussed, and decided, has been shown to exacerbate or ameliorate perceptions of moral distress. The purpose of this mixed-methods study was to explore perceptions of moral distress, moral residue, and ethical climate among registered nurses working in an academic medical center. Two versions of the Moral Distress Scale in addition to the Hospital Ethical Climate Survey were used, and participants were invited to respond to 2 open-ended questions. Part I reported the findings among nurses working in adult acute and critical care units. Part II presents the results from nurses working in pediatric/neonatal units. Significant differences in findings between the 2 groups are discussed. Subsequent interventions developed are also presented.

The Ayurvedic Pharmacopoeia of India, development and perspectives.

PubMed

Joshi, Vinod Kumar; Joshi, Apurva; Dhiman, Kartar Singh

2017-02-02

The Ayurvedic Pharmacopoeia of India (API) is a unique book of standards describing the quality, purity and strength of selected drugs that are manufactured, distributed, and sold by the licensed manufacturers in pan India. It is developed in two parts; the part one comprises of mono-monographs of medicinal substances of natural origin and part two includes selected compound formulations sourced from the schedule - I books under the Drugs and Cosmetics Act, 1940 comprising of popular Ayurvedic classics of different period of times. The first part of the Ayurvedic Formulary of India was published in 1978 and thereafter, the Ayurvedic Pharmacopoeia of India (mono-monograph) Part-I, Vol. I was published in the year 1989 and subsequently, the other volumes were published with their legalized status under Drugs and Cosmetics Act, 1940. The study was aimed to bring out the existing knowledge on the Ayurvedic pharmacopoeia with its chronological development reviewed from the ancient Vedic Compendia with its continuum in Ayurvedic classics of different period of time till recent past. A literary search based on the ancient origin of Ayurveda was carried out. The drug making from the natural resources and utility of the knowledge exist in classical Ayurvedic works of different period of time till composition of the Ayurvedic Pharmacopoeia of India and its importance as official documents of Govt. of India for Standards of Ayurvedic Drugs and its perspectives have been discussed. The present paper reviews on the systemic development and different aspects of drug-making (Pharmacopoeia) with evidence lying in the 5000 years old work of India. During the systematic review of the various works of different period of times (ancient, medieval and modern), it was found that the Ayurvedic Pharmacopoeia of India has its development during 20th Century as an official document of Govt. of India comprising of single drugs monograph and compound formulations. In India, the development of the Indian Pharmacopoeia started in 20th Century on the recommendation of the Col. R.N. Chopra Committee and in 1978 the first part of the Ayurvedic formulary of India was published. Subsequently, the amendment in the drugs and cosmetics Act 1940 was brought in 1964 for regulation of the drugs in Indian Systems of Medicine (Ayurveda, Unani and Siddha). Later on the Ayurvedic Pharmacopoeia of India (Mono-Monograph) Part-I, Volume I, was published in the year 1989 and the other volumes were published subsequently in different years. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Access to CAMAC from VxWorks and UNIX in DART

DOE Office of Scientific and Technical Information (OSTI.GOV)

Streets, J.; Meadows, J.; Moore, C.

1995-05-01

As part of the DART Project the authors have developed a package of software for CAMAC access from UNIX and VxWorks platforms, with support for several hardware interfaces. They report on developments for the CES CBD8210 VME to parallel CAMAC, the Hytec VSD2992 VME to serial CAMAC and Jorway 411S SCSI to parallel and serial CAMAC branch drivers, and give a summary of the timings obtained.

University of Wolverhampton Case Study: Embedding Practical Work-Based Modules into a Traditionally, Theoretical Programme

ERIC Educational Resources Information Center

Nicholls, Emma; Walsh, Margaret

2007-01-01

Purpose: This case study aims to provide a critical evaluation of the decision by the University of Wolverhampton's School of Legal Studies to develop a number of work-based learning modules, offered as part of the undergraduate programme. It seeks to examine why the School has taken the approach of embedding work-based learning into what has…

Part of the global livestock industry.

PubMed

Tice, George

2016-06-18

As an undergraduate, George Tice developed an interest in farm animal medicine and planned to work in this area after qualifying, but he also wanted to experience working in Africa. Having achieved both, he joined Elanco and has worked in a variety of roles in Europe and the USA. So as not to lose direct contact with animals, however, he keeps a selection at home. British Veterinary Association.

Understanding the Impact of New Technology on Life and Work. Learning Guide 12. Project Connect. Linking Self-Family-Work.

ERIC Educational Resources Information Center

Emily Hall Tremaine Foundation, Inc., Hartford, CT.

This learning guide on understanding the impact of new technology on life and work is part of a series of learning guides developed for competency-based adult consumer and homemaking education programs in community colleges, adult education centers, community centers, and the workplace. Focus is on the connections among personal, family, and job…

The legal system. Part 1: it's not just for lawyers.

PubMed

Boylan-Kemp, Jo

This article is the first of two providing an introduction to the foundational elements of the English legal system. The 'English legal system' is a rather generic term that is often used to refer to the different sources of law and the court system in which the law is practiced. Students of law will study the English legal system as a specific topic, but it is as equally important for those who work within a profession that is regulated by the law (as nursing is) to also develop an understanding of the legal boundaries within which such a profession works. Part one, therefore, will consider the matters that form the cornerstone of our legal system, such as the constitution, and it will also explain the specific legal terms and doctrines that influence how our law is made and developed. Part two will then go on to consider the different sources of law that can be found within the English legal system. The aim of these articles is to describe these principles in a way that makes them easily understandable by those who are not involved with practicing law but who instead work within other disciplines, such as nursing.

Breakup of loosely bound nuclei at intermediate energies for nuclear astrophysics and the development of a position sensitive microstrip detector system and its readout electronics using ASICs technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bertulani, Carlos A.

2016-01-12

The work performed under this grant has led to the development of a detection system that will be used to measure reaction rates for proton or neutron capture reactions at stellar energies on radioactive ions far from stability. The reaction rates are needed to better understand the physics of nucleosynthesis in explosive stellar processes such as supernovae and x-ray burst events. The radioactive ions will be produced at the Radioactive Ion Beam Facility (RIBF) at RIKEN near Tokyo, Japan. During the course of this work, the group involved in this project has expanded by several institutions in Europe and Japanmore » and now involves collaborators from the U.S., Japan, Hungary, Romania, Germany, Spain, Italy, China, and South Korea. As part of the project, a novel design based on large-area silicon detectors has been built and tested. The work has involved mechanical construction of a special purpose vacuum chamber, with a precision mounting system for the silicon detectors, development of a new ASICs readout system that has applications with a wide variety of silicon detector systems, and the development of a data acquisition system that is integrated into the computer system being used at RIBF. The parts noted above that are needed to carry out the research program are completed and ready for installation. Several approved experiments that will use this system will be carried out in the near future. The experimental work has been delayed due to a large increase in the cost and availability of electrical power for RIBF that occurred following the massive earthquake and tsunami that hit Japan in the spring of 2011. Another component of the research carried out with this grant involved developing the theoretical tools that are required to extract the information from the experiments that is needed to determine the stellar reaction rates. The tools developed through this part of the work will be made freely available for general use.« less

Career destinations, views and future plans of the UK medical qualifiers of 1988.

PubMed

Taylor, Kathryn; Lambert, Trevor; Goldacre, Michael

2010-01-01

To report the career destinations, views and future plans of a cohort of senior doctors who qualified in the 1980s. Postal questionnaire survey of all doctors who qualified from all UK medical schools in 1988. The response rate was 69%. We estimated that 81% of the total cohort was working in the NHS, 16 years after qualification; and that at least 94% of graduates who, when students, were from UK homes, were working in medicine. Of NHS doctors, 30% worked part-time. NHS doctors rated their job satisfaction highly (median score 19.9, scale 5-25) but were less satisfied with the amount of leisure time available to them (median score 5.4, scale 1-10). NHS doctors were very positive about their careers, but were less positive about working hours and some other aspects of the NHS. Women were more positive than men about working conditions; general practitioners were more positive than hospital doctors. Twenty-five percent reported unmet needs for further training or career-related advice, particularly about career development. Twenty-nine percent intended to reduce their hours in future, while 6%, mainly part-time women, planned to increase their hours. Overall, 10% of NHS doctors planned to do more service work in future and 24% planned to do less; among part-time women, 18% planned to do more and only 14% less. These NHS doctors, now in their 40s, had a high level of satisfaction with their jobs and their careers but were less satisfied with some other aspects of their working environment. A substantial percentage had expectations about future career development and change.

Career destinations, views and future plans of the UK medical qualifiers of 1988

PubMed Central

Taylor, Kathryn; Lambert, Trevor; Goldacre, Michael

2010-01-01

Summary Objectives To report the career destinations, views and future plans of a cohort of senior doctors who qualified in the 1980s. Methods Postal questionnaire survey of all doctors who qualified from all UK medical schools in 1988. Results The response rate was 69%. We estimated that 81% of the total cohort was working in the NHS, 16 years after qualification; and that at least 94% of graduates who, when students, were from UK homes, were working in medicine. Of NHS doctors, 30% worked part-time. NHS doctors rated their job satisfaction highly (median score 19.9, scale 5–25) but were less satisfied with the amount of leisure time available to them (median score 5.4, scale 1–10). NHS doctors were very positive about their careers, but were less positive about working hours and some other aspects of the NHS. Women were more positive than men about working conditions; general practitioners were more positive than hospital doctors. Twenty-five percent reported unmet needs for further training or career-related advice, particularly about career development. Twenty-nine percent intended to reduce their hours in future, while 6%, mainly part-time women, planned to increase their hours. Overall, 10% of NHS doctors planned to do more service work in future and 24% planned to do less; among part-time women, 18% planned to do more and only 14% less. Conclusions These NHS doctors, now in their 40s, had a high level of satisfaction with their jobs and their careers but were less satisfied with some other aspects of their working environment. A substantial percentage had expectations about future career development and change. PMID:20056666

DEGAS: Dynamic Exascale Global Address Space Programming Environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Demmel, James

The Dynamic, Exascale Global Address Space programming environment (DEGAS) project will develop the next generation of programming models and runtime systems to meet the challenges of Exascale computing. The Berkeley part of the project concentrated on communication-optimal code generation to optimize speed and energy efficiency by reducing data movement. Our work developed communication lower bounds, and/or communication avoiding algorithms (that either meet the lower bound, or do much less communication than their conventional counterparts) for a variety of algorithms, including linear algebra, machine learning and genomics. The Berkeley part of the project concentrated on communication-optimal code generation to optimize speedmore » and energy efficiency by reducing data movement. Our work developed communication lower bounds, and/or communication avoiding algorithms (that either meet the lower bound, or do much less communication than their conventional counterparts) for a variety of algorithms, including linear algebra, machine learning and genomics.« less

Rule-based optimization and multicriteria decision support for packaging a truck chassis

NASA Astrophysics Data System (ADS)

Berger, Martin; Lindroth, Peter; Welke, Richard

2017-06-01

Trucks are highly individualized products where exchangeable parts are flexibly combined to suit different customer requirements, this leading to a great complexity in product development. Therefore, an optimization approach based on constraint programming is proposed for automatically packaging parts of a truck chassis by following packaging rules expressed as constraints. A multicriteria decision support system is developed where a database of truck layouts is computed, among which interactive navigation then can be performed. The work has been performed in cooperation with Volvo Group Trucks Technology (GTT), from which specific rules have been used. Several scenarios are described where the methods developed can be successfully applied and lead to less time-consuming manual work, fewer mistakes, and greater flexibility in configuring trucks. A numerical evaluation is also presented showing the efficiency and practical relevance of the methods, which are implemented in a software tool.

Community Health Education in Developing Countries. Appropriate Technologies for Development. Manual M-8.

ERIC Educational Resources Information Center

American Public Health Association, Washington, DC.

This manual was developed for those interested in promoting change to improve health conditions of their communities. Parts I and II focus on fundamental health education processes and discuss techniques and approaches for working with community members to plan and develop programs that are responsive to the community's expressed needs and goals.…

Asbestos-Containing Materials in School Buildings: A Guidance Document. Part 1.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC. Office of Toxic Substances.

The Environmental Protection Agency (EPA) has worked with the states to develop a program for accurate information and guidance to deal with the problem of school buildings constructed with asbestos-containing materials. This is the first of two guidance manuals that are a major part of this program and are being mailed to all public school…

Negative Correlates of Part-Time Employment during Adolescence: Replication and Elaboration.

ERIC Educational Resources Information Center

Steinberg, Laurence; Dornbusch, Sanford M.

This study examined the relation between part-time employment and adolescent behavior and development in a multi-ethnic, multi-class sample of approximately 4,000 15- through 18-year-olds. The results indicated that long work hours during the school year were associated with diminished investment in schooling and lowered school performance,…

Reactions. Learning in Science Project. Working Paper No. 37.

ERIC Educational Resources Information Center

Schollum, Brendan

The concept of a chemical reaction (as opposed to physical mixing, dissolution, or change of state) is developed in this five-part unit. In addition, the ideas that chemical reactions involve the formation of new substances and that mass is conserved in a chemical reaction are stressed. Part 1 discusses unit objectives and considers teachers'…

DEBLICOM: Deaf-Blind Communication and Control Systems. Interim Progress Report, August 1974-August 1975.

ERIC Educational Resources Information Center

Kafafian, Haig

Presented is a report on the work of Cybernetics Research Institute (CRI) investigators on the development of deaf-blind communication and control systems (DEBLICOM). Described in Part One is one embodiment of DEBLICOM designed and built by CRI engineers. Reported in Part Two are experimental procedures and human factors considerations of…

Open Court Reading[c]. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2012

2012-01-01

"Open Court Reading"[c] is a core reading program for grades K-6 developed by SRA/McGraw-Hill that is designed to teach decoding, comprehension, inquiry, and writing in a logical progression. Part 1 of each unit, Preparing to Read, focuses on phonemic awareness, sounds and letters, phonics, fluency, and word knowledge. Part 2, Reading…

Work-Related Musculoskeletal Disorders and Risk Factors among Chinese Medical Staff of Obstetrics and Gynecology.

PubMed

Wang, Jingjing; Cui, Ya; He, Lihua; Xu, Xiangrong; Yuan, Zhiwei; Jin, Xianning; Li, Zhimin

2017-05-26

Medical staff in the department of obstetrics and gynecology are a group of professionals reportedly at high risk of work-related musculoskeletal disorders (WMSD), however, little is known about the current status of this problem in China. The aim of this study was to investigate prevalence and risk factors of work-related musculoskeletal disorders among this population in China. A self-developed questionnaire was distributed to 1017 obstetrics and gynecology practitioners to collect information on musculoskeletal symptoms and relevant factors. Prevalence and severity of work-related musculoskeletal disorders in different parts of the body were calculated and the relationship between personal and ergonomic factors and work-related musculoskeletal disorders was analyzed using Chi-square test and unconditional logistic regression models. The results indicated a high prevalence of 85.5% among the subjects, with the shoulder ( n = 575, 62.0%), neck ( n = 560, 60.3%) and lower back ( n = 504, 54.3%) being the three most affected regions. Individual, postural, work-environmental as well as psychosocial factors were recognized to be associated with WMSDs in different body parts. Therefore, attention must be given to the problem of musculoskeletal disorders among Chinese obstetrics and gynecology staff. It is recommended to develop good life habits, improve work environment, adjust work organization as well as train on proper postures in their daily operation.

Managing Highway Maintenance: Budget Preparation, Unit 9, Level 3.

ERIC Educational Resources Information Center

Federal Highway Administration (DOT), Washington, DC. Offices of Research and Development.

Part of the series "Managing Highway Maintenance," the unit describes the essential steps in developing a maintenance budget, or performance budget, based on the work to be done. It is designed for field engineers and supervisors who assist department officials in preparing work programs and budgets. The format is a programed,…

Handling Office Politics. [Second Edition.

ERIC Educational Resources Information Center

Stevens, Paul

This book is designed to help people develop an action plan to enhance their situation at work. Part 1 focuses on political behavior at work as a key to advancement. It discusses assessing career setbacks and recovery from them. Subsequent sections focus on the following areas of self-study that are necessary to enable the individual to manage…

Reading, Writing, and Conducting Inquiry about Science in Kindergarten

ERIC Educational Resources Information Center

Patrick, Helen; Mantzicopoulos, Panayota; Samarapungavan, Ala

2009-01-01

Over the past three years, the authors have worked with kindergarten teachers to develop study units with sequences of integrated science inquiry and literacy activities appropriate for kindergartners. Their work, which is part of the Scientific Literacy Project, has been very successful. The success of the Scientific Literacy Project (SLP) is in…

Cooperative Work Groups: Preparing Students for the Real World.

ERIC Educational Resources Information Center

Mandel, Scott M.

This book outlines how educators can design meaningful learning experiences that address standards and utilize cooperative learning, brain research, and the Internet to effectively develop a students' ability to thrive in the 21st century workplace. After an introduction that explains cooperative work groups, there are 13 chapters in four parts.…

Professional Development for Family Learning Programmes: A Rationale and Outline Curriculum

ERIC Educational Resources Information Center

Heydon, Liz; Reilly, Jill

2007-01-01

Practice in working with parents is changing and communicating with parents is increasingly a part of teachers' responsibilities. Besides focusing on supporting their children's learning, many schools now involve parents in education for themselves. Yet despite the expectation that they will work to engage parents in their children's learning, in…

46 CFR 78.83-1 - Special operating conditions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... industrial trucks shall have adequate ventilation. The senior deck officer shall see that tests of the carbon... concentrations do not develop. Such tests shall be made in the area in which persons are working, by persons... intermediate decks where persons are working shall be maintained at not more than 50 parts per million (0.005...

Measuring Heedful Interrelating in Collaborative Educational Settings

ERIC Educational Resources Information Center

Daniel, Sarah R.; Jordan, Michelle E.

2015-01-01

Collaborative group work plays an important part in postsecondary education, and the ability to assess the quality of such group work is useful for both students and instructors. The purpose of this study was to develop a self-report measure of students' perceptions of the quality of their interactions during collaborative educational tasks.…

Socialization and Development of the Work Ethic among Adolescents and Young Adults

ERIC Educational Resources Information Center

ter Bogt, Tom; Raaijmakers, Quinten; van Wel, Frits

2005-01-01

Work ethic is part of a broader field of attitudes, identified as cultural conservatism. The results of this longitudinal study--three repeated measurements with 620 adolescents and one of their parents as participants--show that parents' social economic status and educational level are associated with their cultural conservatism, and with the…

Introduction to Technical Services. Seventh Edition. Library and Information Science Text Series.

ERIC Educational Resources Information Center

Evans, G. Edward; Intner, Sheila S.; Weihs, Jean

This updated edition covers all aspects of library technical services--from acquisitions to managing the cataloging department--with new emphasis on automation as it affects technical services work and those skills that can be developed through work experience or classroom instruction. Part One, General Background, consists of four chapters that…

A Framework for Teaching Practice-Based Research with a Focus on Service Users

ERIC Educational Resources Information Center

Austin, Michael J.; Isokuortti, Nanne

2016-01-01

The integration of research and practice in social work education and agency practice is both complex and challenging. The analysis presented here builds upon the classic social work generalist framework (engagement, assessment, service planning and implementation, service evaluation, and termination) by developing a three-part framework to…

Life Affirming Work and Social Justice. Symposium.

ERIC Educational Resources Information Center

2002

This document contains three papers from a symposium on life-affirming work and social justice that was conducted as part of a conference on human resource development (HRD). "Doing Good or Doing Well? A Counter-story of Continuing Professional Education (CPE)" (Laurel Jeris, Linda Armacost) reports on an exploratory study in which a…

7 CFR Exhibit F to Subpart A of... - Payment Bond

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGULATIONS CONSTRUCTION AND REPAIR Planning and Performing Construction and Other Development Pt. 1924, Subpt... _______ day of ________19__, a copy of which is hereto attached and made a part hereof for the construction of... connection with the construction of such WORK, and for all labor cost incurred in such WORK including that by...

Greening Steel Work: Varieties of Capitalism and the "Greening" of Skills

ERIC Educational Resources Information Center

Evans, Claire; Stroud, Dean

2016-01-01

An important driver of change in work, employment and skills is European Union policy aims of sustainable economic growth and the cultivation of a green economy. Part of the latter--which is supported by increasing environmental regulation--focuses on the development of a "green skills agenda," which involves the "greening" of…

Evaluation Development and Use in Social Work Practice

ERIC Educational Resources Information Center

Gervin, Derrick W.; Davis, Sarita K.; Jones, Jenny L.; Counts-Spriggs, Margaret S. E.; Farris, Kimberly D.

2010-01-01

Background: Social workers entering the profession typically receive little, if any, content or training on evaluation practice. This is, in part, due to limited course offerings outside of the typical courses in most schools of social work. In addition, practicing social workers who often serve in the role as field instructors have not fully…

Emotion at Work: A Contribution to Third-Generation Cultural-Historical Activity Theory

ERIC Educational Resources Information Center

Roth, Wolff-Michael

2007-01-01

Second-generation cultural-historical activity theory, which drew its inspiration from Leont'ev's work, constituted an advance over Vygotsky's first-generation theory by explicitly articulating the dialectical relation between individual and collective. As part of an effort to develop third-generation-historical activity theory, I propose in this…

Enhancing Graduate Prospects by Recording and Reflecting on Part-Time Work: A Challenge to Students and Universities

ERIC Educational Resources Information Center

Evans, Carl; Richardson, Mark

2017-01-01

Business leaders are becoming increasingly explicit regarding the skills, attributes and behaviours expected of graduate entrants. These skills are often developed through a combination of academic studies and work experience. While universities are increasingly providing opportunities for experiential learning, typically a placement year or…

Para Candidatos en Programas de Centros de Cuidado y Educacion Infantil con Bebes y "Toddlers": Asociado en Desarrollo Infantil Sistema de Evaluacion y Normas de Competencia CDA (Infant/Toddler Caregivers in Center-Based Programs: The Child Development Associate Assessment System and Competency Standards).

ERIC Educational Resources Information Center

Council for Early Childhood Professional Recognition, Washington, DC.

This Spanish-language booklet outlines the requirements of the Child Development Associate (CDA) credential for caregivers working in center-based infant and toddler day care programs. Part 1 provides an overview of the CDA credentialing system and the various options, settings, standards, and stages of the CDA assessment system. Part 2 explains…

Part-time employment of gynecologists and obstetricians: a sub-group analysis of a Germany-wide survey of residents.

PubMed

Schott, Sarah; Lermann, Johannes; Eismann, Sabine; Neimann, Johannes; Knabl, Julia

2017-01-01

Combining family and career is increasingly taken for granted in many fields. However, the medical profession in Germany has inadequately developed structures. Little is known regarding the satisfaction of physicians working part-time (PT). This Germany-wide on-line survey collected information on the working situation of PT employees (PTE) in gynecology. An anonymous questionnaire with 95 items, nine of which concerned PT work, was sent to 2770 residents and physicians undergoing further specialist training. Of the 481 participants, 104 (96 % female, 4 % male) stated they worked PT, which is greater than the national average. 94 % of all women and 60 % of all men would work PT for better compatibility between work and family life. The PTE regularly work night shifts (NS) (96 %) and weekends (98 %). The number of monthly NS (median 5-9) was not different between the full-time (FT) employees and the PTE who work >75 %. Only when the working hours are reduced by 25 % or more, there are fewer NS (median 1-4) PTE that have a desire for fewer NS. The classic PT model is seldom realized; over 70 % of PTE work whole days, while other working models do not play a major role in Germany. On-call models were subjectively declared to have the best family friendly work-life balance. The results obtained indicated that structures must be developed that to address the problem of childcare and the long working hours to ensure comprehensive medical care from specialists.

Non-Formal Education and Rural Development. Supplementary Paper No. 7.

ERIC Educational Resources Information Center

Axinn, George H.; And Others

Based on five working papers developed as part of the Program of Studies in Nonformal Education at Michigan State University, this monograph suggests a conceptual framework for analysis of rural development and nonformal education and the relationship which exists between them. The four sections of this monograph are titled and subtitled as…

THE EFFECTS OF LOW DOSE PTU ON ENDPOINTS OF THYROID HORMONE ACTION IN THE DEVELOPING BRAIN.

EPA Science Inventory

Thyroid hormone (TH) is essential for normal brain development. Therefore, there is concern that any factor that reduces TH levels may permanently alter brain development. As part of an EPA Cooperative Agreement, the goal of this work was to characterize the degree to which cir...

7 CFR Exhibit B to Subpart C of... - Site Development Design Requirements

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Site Development Design Requirements B Exhibit B to... Work Pt. 1924, Subpt. C, Exh. B Exhibit B to Subpart C of Part 1924—Site Development Design... burdens and conditions unsuitable for healthy and pleasant living. Proper site design can preserve...

7 CFR Exhibit B to Subpart C of... - Site Development Design Requirements

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 12 2013-01-01 2013-01-01 false Site Development Design Requirements B Exhibit B to... Work Pt. 1924, Subpt. C, Exh. B Exhibit B to Subpart C of Part 1924—Site Development Design... burdens and conditions unsuitable for healthy and pleasant living. Proper site design can preserve...

7 CFR Exhibit B to Subpart C of... - Site Development Design Requirements

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 12 2012-01-01 2012-01-01 false Site Development Design Requirements B Exhibit B to... Work Pt. 1924, Subpt. C, Exh. B Exhibit B to Subpart C of Part 1924—Site Development Design... burdens and conditions unsuitable for healthy and pleasant living. Proper site design can preserve...

7 CFR Exhibit B to Subpart C of... - Site Development Design Requirements

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 12 2011-01-01 2011-01-01 false Site Development Design Requirements B Exhibit B to... Work Pt. 1924, Subpt. C, Exh. B Exhibit B to Subpart C of Part 1924—Site Development Design... burdens and conditions unsuitable for healthy and pleasant living. Proper site design can preserve...

7 CFR Exhibit B to Subpart C of... - Site Development Design Requirements

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 12 2014-01-01 2013-01-01 true Site Development Design Requirements B Exhibit B to... Work Pt. 1924, Subpt. C, Exh. B Exhibit B to Subpart C of Part 1924—Site Development Design... burdens and conditions unsuitable for healthy and pleasant living. Proper site design can preserve...

Perceptions of Success and Impact of Interactions on Faculty Development Centers in Higher Education

ERIC Educational Resources Information Center

White, Mark

2014-01-01

In efforts to improve the quality of education, higher education institutions are increasingly turning to lead faculty developers (LFDs) of faculty development centers (FDCs) as part of the solution. Historically, LFDs have been responsible for working directly with faculty to improve teaching strategies, course design, and technology integration.…

Closing the Performance Gap; Results-Centered Employee Development.

ERIC Educational Resources Information Center

Kellogg, Marion S.

This is a handbook for those who get work done through other people; it concentrates on that part of their task which has to do with encouraging employees to develop abilities and attitudes which assure accomplishment. It presents principles and practices which apply to all employees. Chapters cover Employee Development: A Business "Must,"…

Feasibility of an Online Professional Development Program for Early Intervention Practitioners

ERIC Educational Resources Information Center

Kyzar, Kathleen B.; Chiu, Caya; Kemp, Peggy; Aldersey, Heather Michelle; Turnbull, Ann P.; Lindeman, David P.

2014-01-01

This article reports findings from 2 studies situated within a larger scope of design research on a professional development program, "Early Years," for Part C early intervention practitioners, working with families in home and community settings. Early Years includes online modules and onsite mentor coaching, and its development has…

The Current Working Conditions in Ugandan Apparel Assembly Plants.

PubMed

Tebyetekerwa, Mike; Akankwasa, Nicholus Tayari; Marriam, Ifra

2017-12-01

The present rapid shift of industrialization from developed to developing countries requires developing countries to understand issues related to work organization, management, and working conditions. There are many factors slackening production, of which working conditions is part. A complete inquiry into the workers' working conditions can enable managements to reduce risks in the workplaces and improve productivity. Understanding and awareness of the benefits of workplace research and a probe into the working conditions in the Ugandan apparel assembly plants are urgently required. A total of 103 (70 women and 33 men) workers from five different plants were interviewed. Together with the top management of various plants, questionnaires about the workers' opinions of their physical working conditions were prepared. Data was collected using two methods: (1) questionnaire; and (2) observation of the workers during their work. The results indicated that poor plant working conditions were mainly contributed by the workers' social factors and the management policies. The government, together with the management, should work to improve the working conditions in the apparel assembly plants, as it greatly affects both.

Curriculum Guide Construction Cluster.

ERIC Educational Resources Information Center

Kline, Ken

As part of a model construction cluster curriculum development project, this guide was developed and implemented in the Beaverton (Oregon) School District. The curriculum guide contains 16 units covering the following topics: introduction to construction jobs; safety and first aid; blueprint readings; basic mathematics; site work; framing; roofing…

Exploring Teacher Professional Learning for Future-Oriented Schooling: Working Paper 1 from the Back to the Future Project

ERIC Educational Resources Information Center

Gilbert, Jane; Bull, Ally

2014-01-01

This working paper sets out some of the early findings from a pilot project to explore the qualities that future-oriented teachers might need and how those qualities might be developed. The work began under a New Zealand Council for Educational Research (NZCER) project called Back to the Future and is now part of a Teaching & Learning Research…

[Practices and interventions related to the work integration of people with a severe mental illness: work outcomes and avenues of research].

PubMed

Pachoud, B; Corbière, M

2014-06-01

Sustained work integration for people with a severe mental illness or handicap psychique in French (e.g., schizophrenia) is an important issue in our society today. Indeed, work is not only an essential factor in people's social integration but is also a stepping-stone toward recovery for this clientele. Well-defined programs and services related to work integration were developed and studied over the last three decades. Although the work integration of people with severe mental illness has been studied extensively in the Anglo-Saxon literature, the impact of these studies on the traditional beliefs and services in France remains uncertain. In terms of the scope of the studies so far, there has been an initial interest lasting over many years to uncover individual characteristics of people with severe mental illness which would best predict job tenure. Since, studies have been increasingly investigating various supports in order to facilitate the work integration process. These supports can be illustrated as direct supports or accommodations offered in the workplace, as needed, particularly when people with severe mental illness choose to disclose their mental disorder in the workplace. This awareness of the impact of the workplace environment on the work integration of people with a severe mental illness increases the need to find solutions and develop environmentally sensitive clinical strategies to overcome difficulties during the work integration. To illustrate this thematic, in this special issue, we have gathered together studies conducted in different countries but who share the focus on work integration of people with a severe mental illness. To reflect the advancement in this domain, this special issue is divided in three parts. The first part consists of the presentation of different types of vocational programs: supported employment programs, social firms, and hybrid models. Supported employment programs are very well documented in the specialised literature and are recognized as an evidence-based practice across the world to help people get competitive employment. Social firms is an another alternative model for facilitating the work integration of people with severe mental illness but has to date scarcely been studied empirically. Other hybrid vocational programs implemented in Québec (Canada) and France and inspired by supported employment programs and social firms' principles, are also described. The second part of this special issue is related to the presentation of two adjunct clinical interventions for helping people with a severe mental illness in their work integration, and more particularly for increasing job tenure: cognitive remediation and group cognitive behavioral therapy. Cognitive remediation was developed to reduce the impact of cognitive deficits, such as memory or attention, in people with a severe mental illness whereas group cognitive behavioral therapy was developed to change the dysfunctional beliefs and behaviours that might hinder job tenure in people receiving supported employment services. Finally, the third part of this special issue presents two papers on the influence of the workplace, of stakeholders from the organization (e.g., employers, supervisors) and of the work environment on the work integration of people with severe mental illness. The first paper discusses disclosure of the mental illness in the workplace and its positive and negative consequences such as receiving work accommodations and experiencing stigma, respectively. In the last paper, psychological processes during the hiring process are presented to better understand the elements related to discrimination and stigma during the work integration of people with severe mental illness. Copyright © 2014. Published by Elsevier Masson SAS.

Results of Microbiologic Investigations of Water-Development Works

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durcheva, V. N., E-mail: durchevavn@vniig.ru; Izmailova, R. A., E-mail: izmailovara@vniig.ru; Legina, E. E., E-mail: leginaee@vniig.ru

2015-03-15

Results are presented for multiyear field investigations of the effect of microbe colonies on components of water-development works. Concrete, metal, and geologic rocks were studied as component parts of the bed of concrete dams functioning in various climatic zones. The participation of lithotrophic bacteria in processes involving corrosion failure of the metal, concrete, and rock beds of dams is established, and causes of intensification of microbe activity are exposed. The need for monitoring the composition and number of microorganisms-biodestructors is substantiated in the water of a reservoir and observation wells, as well as on the surfaces of structural components ofmore » water-development works for monitoring of the safety of the concrete dams.« less

Philippine Wind Farm Analysis and Site Selection Analysis, 1 January 2000 - 31 December 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, K.

2001-12-01

The U.S. Department of Energy (DOE), through the National Renewable Energy Laboratory (NREL), has been working in partnership with the U.S. Agency for International Development (USAID) in an ongoing process to quantify the Philippine wind energy potential and foster wind farm development. As part of that process, NREL retained Global Energy Concepts, LLC (GEC) to review and update the policy needs as well as develop a site-screening process applicable for the Philippines. GEC worked closely with the Philippines National Power Corporation (NPC) in completing this work. This report provides the results of the policy needs and site selection analyses conductedmore » by GEC.« less

Geologic interpretation of seismic data relocation Route 2, Littleton Road grade separation stations 243-252 in Harvard, Mass.

USGS Publications Warehouse

May, James E.; Linehan, Rev. Daniel

1950-01-01

During parts of June and July 1949 nine seismic traverses were made at this site. Upon preliminary office development, the velocity data for some of these traverses were though to be inadequate and it was recommended that these lines be re-surveyed. Later surveys (March 1950), however, of nearby sites indicated that the original data were reliable and that a re-survey was unnecessary. The work was done as part of a cooperative program of the Massachusetts Department of Public Works and the United States Geological Survey.

Astronomy sortie missions definition study. Volume 4: Program development requirements

NASA Technical Reports Server (NTRS)

1972-01-01

Program development requirements for the selected Astronomy Sortie Missions concept were generated and are presented in four parts as follows: (1)the gross planning requirements that must be considered in subsequent phases of the project; (2)the schedules and logic networks for the design, development, and operation of the overall project; (3)the supporting research and technology required to support the project; and (4)the work breakdown data, from which cost data will be generated. Data reported in each part includes the appropriate rationale with explanations of the guidelines and assumptions that were used in the analyses and estimates.

Equation-free and variable free modeling for complex/multiscale systems. Coarse-grained computation in science and engineering using fine-grained models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kevrekidis, Ioannis G.

The work explored the linking of modern developing machine learning techniques (manifold learning and in particular diffusion maps) with traditional PDE modeling/discretization/scientific computation techniques via the equation-free methodology developed by the PI. The result (in addition to several PhD degrees, two of them by CSGF Fellows) was a sequence of strong developments - in part on the algorithmic side, linking data mining with scientific computing, and in part on applications, ranging from PDE discretizations to molecular dynamics and complex network dynamics.

The Many Faces of Part-List Cuing—Evidence for the Interplay Between Detrimental and Beneficial Mechanisms

PubMed Central

Lehmer, Eva-Maria; Bäuml, Karl-Heinz T.

2018-01-01

If participants study a list of items and, at test, receive a random selection of the studied items as retrieval cues, then such cuing often impairs recall of the remaining items. This effect, referred to as part-list cuing impairment, is a well-established finding in memory research that, over the years, has been attributed to quite different cognitive mechanisms. Here, we provide a review of more recent developments in research on part-list cuing. These developments (i) suggest a new view on part-list cuing impairment and a critical role of encoding for the effect, (ii) identify conditions in which part-list cuing impairment can turn into part-list cuing facilitation, and (iii) relate research on part-list cuing to a phenomenon from social memory, known as collaborative inhibition. The recent developments also include a new multi-mechanisms account, which attributes the effects of cuing to the interplay between detrimental mechanisms—like blocking, inhibition, or strategy disruption—and beneficial mechanisms—like context reactivation. The account provides a useful theoretical framework to describe both older and newer findings. It may guide future work on part-list cuing and may also motivate new research on collaborative inhibition. PMID:29867667

Fatigue Analysis of Rotating Parts. A Case Study for a Belt Driven Pulley

NASA Astrophysics Data System (ADS)

Sandu, Ionela; Tabacu, Stefan; Ducu, Catalin

2017-10-01

The present study is focused on the life estimation of a rotating part as a component of an engine assembly namely the pulley of the coolant pump. The goal of the paper is to develop a model, supported by numerical analysis, capable to predict the lifetime of the part. Starting from functional drawing, CAD Model and technical specifications of the part a numerical model was developed. MATLAB code was used to develop a tool to apply the load over the selected area. The numerical analysis was performed in two steps. The first simulation concerned the inertia relief due to rotational motion about the shaft (of the pump). Results from this simulation were saved and the stress - strain state used as initial conditions for the analysis with the load applied. The lifetime of a good part was estimated. A defect was created in order to investigate the influence over the working requirements. It was found that there is little influence with respect to the prescribed lifetime.

COINS: A composites information database system

NASA Technical Reports Server (NTRS)

Siddiqi, Shahid; Vosteen, Louis F.; Edlow, Ralph; Kwa, Teck-Seng

1992-01-01

An automated data abstraction form (ADAF) was developed to collect information on advanced fabrication processes and their related costs. The information will be collected for all components being fabricated as part of the ACT program and include in a COmposites INformation System (COINS) database. The aim of the COINS development effort is to provide future airframe preliminary design and fabrication teams with a tool through which production cost can become a deterministic variable in the design optimization process. The effort was initiated by the Structures Technology Program Office (STPO) of the NASA LaRC to implement the recommendations of a working group comprised of representatives from the commercial airframe companies. The principal working group recommendation was to re-institute collection of composite part fabrication data in a format similar to the DOD/NASA Structural Composites Fabrication Guide. The fabrication information collection form was automated with current user friendly computer technology. This work in progress paper describes the new automated form and features that make the form easy to use by an aircraft structural design-manufacturing team.

Review on space weather in Latin America. 1. The beginning from space science research

NASA Astrophysics Data System (ADS)

Denardini, Clezio Marcos; Dasso, Sergio; Gonzalez-Esparza, J. Americo

2016-11-01

The present work is the first of a three-part review on space weather in Latin America. It comprises the evolution of several Latin American institutions investing in space science since the 1960s, focusing on the solar-terrestrial interactions, which today is commonly called space weather. Despite recognizing advances in space research in all of Latin America, this review is restricted to the development observed in three countries in particular (Argentina, Brazil and Mexico), due to the fact that these countries have recently developed operational centers for monitoring space weather. The review starts with a brief summary of the first groups to start working with space science in Latin America. This first part of the review closes with the current status and the research interests of these groups, which are described in relation to the most significant works and challenges of the next decade in order to aid in the solving of space weather open issues.

Women's work and development in Latin America.

PubMed

Draper, E

1985-01-01

The discussion explores the problem of women's employment patterns under capitalist development in Latin America, first by analyzing the way in which women's work has been conceptualized within modernization theory. It then goes on to examine the 2 types of work in which most Latin American women are engaged -- domestic service and informal work such as selling produce and taking in laundry -- to provide evidence for challenging modernization theory and for developing a more useful approach. Subsequently, the discussion considers women's domestic and informal work within the context of capitalist development, which provides some insight into the broader structures shaping women's employment. Finally, the discussion proposes some reconceptualizations of women's work and development. Modernization theorists analyze women's work in the cities within a variety of constructs, interpreting it as a backward manifestation of traditional society, a reflection of women's inadequate training for the modern sector, an indication of women's primary orientation to the family, or as a phenomenon that is too tangential to warrant examination. The primary assumption is that modernization improves women's status and the conditions of their lives as it brings greater productivity, more advanced technology, and more highly differentiated institutions. Assumptions concerning women's absorption into the modern sector and the equalization of work roles between men and women are not borne out by actual employment trends, which reveal the persistent concentration of women in domestic work, informal jobs, and the lower-paying service jobs. Despite their predominance, domestic service and informal jobs are infrequently included in employment statistics and are virtually ignored in studies of development, yet these 2 types of work are the primary forms of work for Latin American women. Even when modernization theorists recognize the proliferation of informal and domestic service jobs, they see it as part of a progressive development stage, with displaced rural laborers becoming incorporated into the modern sector by way of informal jobs. In most Latin American countries, rural women become a permanent part of the services and the informal labor market when they move to the cities. There is little sign of their transition to industrial employment. In general, capitalist development marginalizes Latin American women, who in several important ways lose status. The range of pursuits considered women's work should include their activities within the infromal labor sector. Informal work is still virtually unexplored, especially as it relates to wage work in underdeveloped countries. Informal labor is not registered in the census, nor is it included in the gross national product. Yet, it is a major component of women's work. Domestic service and infromal jobs should be seen in relation to other forms of labor and to total social production.

Structure of Nuclei Far From Stability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blackmon, Jeffery C.; Tribble, Robert E.; Sobotka, Lee G.

2015-12-29

The work performed under this grant has led to the development of a detection system that will be used to measure reaction rates for proton or neutron capture reactions at stellar energies on radioactive ions far from stability. The reaction rates are needed to better understand the physics of nucleosynthesis in explosive stellar processes such as supernovae and X-ray burst explosions. The radioactive ions will be produced at the Radioactive Ion Beam Facility (RIBF) at RIKEN near Tokyo, Japan. During the course of this work, the group involved in this project has expanded by several institutions in Europe and Japanmore » and now involves collaborators from the U.S., Japan, Hungary, Romania, Germany, Spain, Italy, China, and South Korea. As part of the project, a novel design based on large-area silicon detectors has been built and tested and the performance characterized in a series of tests using particle beams with a variety of atomic numbers at the Cyclotron Institute of Texas A&M University and the Heavy Ion Medical Accelerator in Chiba facility (HIMAC) in Chiba, Japan. The work has involved mechanical construction of a special purpose vacuum chamber, with a precision mounting system for the silicon detectors, development of a new ASICs readout system that has applications with a wide variety of silicon detector systems, and the development of a data acquisition system that is integrated into the computer system being used at RIBF. The parts noted above that are needed to carry out the research program are completed and ready for installation. Several approved experiments that will use this system will be carried out in the near future. The experimental work has been delayed due to a large increase in the cost and availability of electrical power for RIBF that occurred following the massive earthquake and tsunami that hit Japan in the spring of 2011. Another component of the research carried out with this grant involved developing the theoretical tools that are required to extract the information from the experiments that is needed to determine the stellar reaction rates. The tools developed through this part of the work will be made freely available for general use.« less

Professional Learning Communities

ERIC Educational Resources Information Center

Eley, Alison

2017-01-01

There are many professional development programmes on offer for primary science. The best of these involve teachers in developing practice over time, alongside engaging with theory. In this article, the author considers how working as part of a professional learning community can support a collaborative and evidence informed approach to improving…

EPA U.S. NATIONAL MARKAL DATABASE: DATABASE DOCUMENTATION

EPA Science Inventory

This document describes in detail the U.S. Energy System database developed by EPA's Integrated Strategic Assessment Work Group for use with the MARKAL model. The group is part of the Office of Research and Development and is located in the National Risk Management Research Labor...

Struggling Communities Turn to Colleges

ERIC Educational Resources Information Center

Fischer, Karin

2008-01-01

In economically struggling communities, small private colleges are helping generate development projects in large part as a matter of survival. Unlike research universities and land-grant institutions, which have long viewed regional economic development as central to their missions, most liberal-arts colleges are relative newcomers to this work,…

Breadth of Scientific Activities and Network Station Specifications in the International GPS Service (IGS)

NASA Technical Reports Server (NTRS)

Moore, A. W.; Neilan, R. E.; Springer, T. A.; Reigber, Ch.

2000-01-01

A strong multipurpose aspect of the International GPS Service (IGS) is revealed by a glance at the titles of current projects and working groups within the IGS: IGS/BIPM Time Transfer Project; Ionosphere Working Group; Troposphere Working Group; International GLONASS Experiment; Working Group on Low-Earth Orbiter Missions; and Tide Gauges, CGPS, and the IGS. The IGS network infrastructure, in large part originally commissioned for geodynamical investigations, has proved to be a valuable asset in developing application-oriented subnetworks whose requirements overlap the characteristics of existing IGS stations and future station upgrades. Issues encountered thus far in the development of multipurpose or multitechnique IGS projects as well as future possibilities will be reviewed.

Bronfenbrenner's Bioecological Theory Revision: Moving Culture From the Macro Into the Micro.

PubMed

Vélez-Agosto, Nicole M; Soto-Crespo, José G; Vizcarrondo-Oppenheimer, Mónica; Vega-Molina, Stephanie; García Coll, Cynthia

2017-09-01

Bronfenbrenner's bioecological theory of human development is one of the most widely known theoretical frameworks in human development. In spite of its popularity, the notion of culture within the macrosystem, as a separate entity of everyday practices and therefore microsystems, is problematic. Using the theoretical and empirical work of Rogoff and Weisner, and influenced as they are by Vygotsky's sociocultural perspective, we reconceptualize Bronfenbrenner's model by placing culture as an intricate part of proximal development processes. In our model, culture has the role of defining and organizing microsystems and therefore becomes part of the central processes of human development. Culture is an ever changing system composed of the daily practices of social communities (families, schools, neighborhoods, etc.) and the interpretation of those practices through language and communication. It also comprises tools and signs that are part of the historical legacy of those communities, and thus diversity is an integral part of the child's microsystems, leading to culturally defined acceptable developmental processes and outcomes.

Standardized Estimates of Time Required and Quality of Various Tasks in Household Employment. Final Report.

ERIC Educational Resources Information Center

Vaughn, Janet L.

The pricing of household work can be based on standardized times established for component parts of the job. Techniques for determining these standardized times and the component parts were developed in a study conducted at Purdue University and supported by a federal grant. After a preliminary survey of homemaker practices in cleaning living…

IDA Cost Research Symposium Held 25 May 1995.

DTIC Science & Technology

1995-08-01

Excel Spreadsheet Publications: MCR Report TR-9507/01 Category: II.B Keywords: Government, Estimating, Missiles, Analysis, Production, Data...originally developed by Martin Marietta as part of SASET software estimating model. To be implemented as part of SoftEST Software Estimating Tool...following documents to report the results of Its work. Reports Reports are the most authoritative and most carefully considered products IDA

Making Basic Math Skills Work for You in Marketing. Student Manual and Laboratory Guide.

ERIC Educational Resources Information Center

Klewer, Edwin D.

This student manual and workbook is the second part of a mathematics series for use with high school students. The manual is to be used to apply the mathematics skills that students have learned in a first part called "Developing Basic Math Skills for Marketing." The manual presents conceptual instruction in mathematics in a competency based…

The Teacher's Voice: A Social History of Teaching in Twentieth-century America. Studies in Curriculum History Series: 17.

ERIC Educational Resources Information Center

Altenbaugh, Richard J., Ed.

This collection of essays presents narratives describing the role of classroom teachers in the development of public education in 20th century United States. Following a preface, the book is organized into four parts. The first part, Women's Work, includes "Having a Purpose in Life: Western Women Teachers in the Twentieth Century"…

Introducing Experimental Design by Evaluating Efficacy of Herbal Remedies (Do Herbal Remedies Really Work?)

ERIC Educational Resources Information Center

Smith, Robert A.; Pontiggia, Laura; Waterman, Carrie; Lichtenwalner, Meghan

2010-01-01

This paper is based upon experiments developed as part of a Directed Research course designed to provide undergraduate biology students experience in the principles and processes of the scientific method used in biological research. The project involved the evaluation of herbal remedies used in many parts of the world in the treatment of diseases…

Tests That Work: Designing and Delivering Fair and Practical Measurement Tools in the Workplace.

ERIC Educational Resources Information Center

Westgaard, Odin

This guide shows organization managers how to use tests to assess skills and values in the workplace, as well as how to develop good, fair tests without needing any other resources. Part 1, chapters 1 through 5, presents basic information about tests and their practical applications. Part 2 describes the 15 steps of the testing process. The…

A Tradition of Caring: A Guide for Assessing Families for Kinship Care. Assessment Guide.

ERIC Educational Resources Information Center

Child Welfare League of America, Inc., Washington, DC.

This guide was developed to help child welfare professionals design an effective strength-base process for working mutually with kinship families to assess their ability and willingness to provide care for a relative child in their home. The guide, designed for use with an accompanying curriculum, is organized into four parts. Part 1 introduces…

Trends and problems in development of the power plants electrical part

NASA Astrophysics Data System (ADS)

Gusev, Yu. P.

2015-03-01

The article discusses some problems relating to development of the electrical part of modern nuclear and thermal power plants, which are stemming from the use of new process and electrical equipment, such as gas turbine units, power converters, and intellectual microprocessor devices in relay protection and automated control systems. It is pointed out that the failure rates of electrical equipment at Russian and foreign power plants tend to increase. The ongoing power plant technical refitting and innovative development processes generate the need to significantly widen the scope of research works on the electrical part of power plants and rendering scientific support to works on putting in use innovative equipment. It is indicated that one of main factors causing the growth of electrical equipment failures is that some of components of this equipment have insufficiently compatible dynamic characteristics. This, in turn may be due to lack or obsolescence of regulatory documents specifying the requirements for design solutions and operation of electric power equipment that incorporates electronic and microprocessor control and protection devices. It is proposed to restore the system of developing new and updating existing departmental regulatory technical documents that existed in the 1970s, one of the fundamental principles of which was placing long-term responsibility on higher schools and leading design institutions for rendering scientific-technical support to innovative development of components and systems forming the electrical part of power plants. This will make it possible to achieve lower failure rates of electrical equipment and to steadily improve the competitiveness of the Russian electric power industry and energy efficiency of generating companies.

Countertransference problems in the treatment of a mixed group of war veterans and female partners of war veterans.

PubMed

Gregurek, R

1999-12-01

Analysis of countertransference problems in the treatment of a heterogeneous group of war veterans. The method used in this work was psychodynamic clinical observation and analysis of countertransference phenomena in group therapy. In the beginning of our work, we faced with a regressive group, which was behaving as it was re-born. The leading subject in the group was aggression and the need for hospitalization to protect them and their environment from their violence. With the development of group processes, a feeling of helplessness and lack of perspective appeared, together with suicidal ideas, which, because of the development of group cohesion and trust, could be openly discussed. With time, the group became a transitional object for its members, an object that gave them a feeling of safety but also a feeling of dependence. The role of the therapist is to support group members in becoming independent. The therapist's function is in controlling, containing, and analyzing of the destructive, regressive part and in encouraging the healthy parts of the patient. With the integration of good therapeutic process, the healthy parts of the patient gain control over his or her regressive parts.

A tribute to Michael R. Raupach for contributions to aeolian fluid dynamics

USDA-ARS?s Scientific Manuscript database

Since the early work of Bagnold in the 1940s, aeolian research has grown to become a major integral part of earth-system studies. Many individuals have contributed to this development, and Dr. Michael R. Raupach (MR2, 1950 – 2015) was one of the most outstanding. MR2 worked for about a decade (1985 ...

The Development of Professional Competences Using the Interdisciplinary Project Approach with University Students

ERIC Educational Resources Information Center

González-Carrasco, Mònica; Francés Ortega, Jesús; de Castro Vila, Rodolfo; Castañer Vivas, Margarida; San Molina, Joan; Marti Bonmati, Joan

2016-01-01

This work describes an experience conducted by a group of professors from different departments at the University of Girona (Catalonia, Spain) which arose from the need for interdisciplinary work in university classrooms in order to promote competences relevant to the professional sector. As part of this experience, students from different degree…

"Named Small but Doing Great": An Investigation of Small-Scale Chemistry Experimentation for Effective Undergraduate Practical Work

ERIC Educational Resources Information Center

Tesfamariam, Gebrekidan Mebrahtu; Lykknes, Annette; Kvittingen, Lise

2017-01-01

In theory, practical work is an established part of university-level chemistry courses. However, mainly due to budget constraints, large class size, time constraints and inadequate teacher preparations, practical activities are frequently left out from chemistry classroom instruction in most developing countries. Small-scale chemistry (SSC)…

7 CFR Exhibit K to Subpart A of... - Classifications for Multi-Family Residential Rehabilitation Work

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 12 2013-01-01 2013-01-01 false Classifications for Multi-Family Residential Rehabilitation Work K Exhibit K to Subpart A of Part 1924 Agriculture Regulations of the Department of... Planning and Performing Construction and Other Development Pt. 1924, Subpt. A, Exh. K Exhibit K to Subpart...

7 CFR Exhibit K to Subpart A of... - Classifications for Multi-Family Residential Rehabilitation Work

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 12 2012-01-01 2012-01-01 false Classifications for Multi-Family Residential Rehabilitation Work K Exhibit K to Subpart A of Part 1924 Agriculture Regulations of the Department of... Planning and Performing Construction and Other Development Pt. 1924, Subpt. A, Exh. K Exhibit K to Subpart...

7 CFR Exhibit K to Subpart A of... - Classifications for Multi-Family Residential Rehabilitation Work

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 12 2011-01-01 2011-01-01 false Classifications for Multi-Family Residential Rehabilitation Work K Exhibit K to Subpart A of Part 1924 Agriculture Regulations of the Department of... Planning and Performing Construction and Other Development Pt. 1924, Subpt. A, Exh. K Exhibit K to Subpart...

7 CFR Exhibit K to Subpart A of... - Classifications for Multi-Family Residential Rehabilitation Work

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Classifications for Multi-Family Residential Rehabilitation Work K Exhibit K to Subpart A of Part 1924 Agriculture Regulations of the Department of... Planning and Performing Construction and Other Development Pt. 1924, Subpt. A, Exh. K Exhibit K to Subpart...

7 CFR Exhibit K to Subpart A of... - Classifications for Multi-Family Residential Rehabilitation Work

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 12 2014-01-01 2013-01-01 true Classifications for Multi-Family Residential Rehabilitation Work K Exhibit K to Subpart A of Part 1924 Agriculture Regulations of the Department of... Planning and Performing Construction and Other Development Pt. 1924, Subpt. A, Exh. K Exhibit K to Subpart...

Flexible Pedagogies: Employer Engagement and Work-Based Learning. Flexible Pedagogies: Preparing for the Future Series

ERIC Educational Resources Information Center

Kettle, Jane

2013-01-01

This publication focuses on national and international policy initiatives to develop a better understanding of work-based learners and the types of flexibility that may well enhance their study especially pedagogically. As part of our five-strand research project "Flexible Pedagogies: preparing for the future" it: (1) highlights the…

Developing a Collaborative Model of Industry Feedback for Work Placement of Business Students

ERIC Educational Resources Information Center

Richardson, Joan; Jackling, Beverley; Henschke, Kathy; Tempone, Irene

2013-01-01

Work-integrated learning (WIL) is a signature feature of study in many higher education institutions. In business degrees, industry feedback is recognized as an integral part of the assessment of WIL, yet the role played by industry in appraising student performance in the workplace has not been clearly defined. Based on interviews with industry…

Raising Retention and Achievement in Work-Based Learning

ERIC Educational Resources Information Center

Smith, Vikki

2003-01-01

Work based learning has been subject to some negative press in recent times. Particular emphasis has been given to poor inspection reports within the sector. The Raising Quality and Achievement programme of the Learning and Skills Development Agency, funded by the Learning and Skills Council as part of a grant for a programme of research and…

The Assessment of Executive Functioning in People with Intellectual Disabilities: An Exploratory Analysis

ERIC Educational Resources Information Center

Bevins, Shelley; Hurse, Emily

2016-01-01

The following article details a piece of service development work undertaken as part of the Plymouth Down Syndrome Screening Programme. The work aimed to review the use of three measures assessing executive functioning skills used within the Programme as well as with people without Down syndrome. Three tasks assessing executive functioning (the…

Trowel Trade Work Processes. Pre-Apprenticeship Phase 1 Training.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

This self-paced student training module on trowel trade work processes is part of the course, Trowel Trades, which was developed for Preapprenticeship Phase 1 Training. (A companion instructor's guide is available separately as CE 032 868.) The course is designed to provide students with an orientation to the trade and an opportunity to explore…

Insider/Outsider Ambiguities and the Canadian Museum for Human Rights

ERIC Educational Resources Information Center

Pelletier, Julie

2015-01-01

Author Julie Pelletier recently became part of a new committee at the Canadian Museum for Human Rights (CMHR): the Indigenous Education Working Group (IEWG). The IEWG is a working group made up of Indigenous individuals with a background in indigenous education. The first project the IEWG undertook was assisting with the development of Indigenous…

The World of Work. A Curriculum Guide for Grades One through Twelve.

ERIC Educational Resources Information Center

Pointer, Leah J., Ed.

Developed by a committee of principals, counselors, and teachers as part of the local World of Work program, this curriculum guide is designed to aid in providing occupational information and career decision-making skills for grades K-12. Major purposes of the guide are to: (1) provide occupational information that is both educational and…

Access to CAMAC from VxWorks and UNIX in DART

NASA Astrophysics Data System (ADS)

Streets, J.; Meadows, J.; Moore, C.; Pordes, R.; Slimmer, D.; Vittone, M.; Stern, E.

1996-02-01

As part of the DART Project [Data acquisition for the next Generation Fermilab Fixed Target Experiments] we have developed a package of software for CAMAC access from UNIX and VxWorks platforms, with support for several hardware interfaces. We report on developments for the CES CBD8210 VME to parallel CAMAC, the Hytec VSD2992 VME to serial CAMAC and Jorway 411s SCSI to parallel and serial CAMAC branch drivers, and give a summary of the timings obtained.

CO2 Capture Project: An Integrated, Collaborative Technology Development Project For CO2 Separation, Capture And Geologic Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Helen Kerr

2002-01-10

This report (which forms part of the requirements of the Statement of Work Task 0, subtask 0.4) records progress towards defining a detailed Work Plan for the CCP 30 days after contract initiation. It describes the studies planned, workscope development and technology provider bid evaluation status at that time. Business sensitive information is provided separately in Appendix 1. Contract negotiations are on hold pending award of patent waiver status to the CCP.

Voices of Pedagogical Development--Expanding, Enhancing and Exploring Higher Education Language Learning

ERIC Educational Resources Information Center

Jalkanen, Juha, Ed.; Jokinen, Elina, Ed.; Taalas, Peppi, Ed.

2015-01-01

"Voices of Pedagogical Development" is a collection of articles written by teacher-researchers at the University of Jyväskylä Language Centre. It shares the fruits of their ideas and development work in the areas of academic literacies, new forms of teaching and learning, and internationalisation. Part one aims at establishing and…

Developing an Early Childhood Teacher Workforce Development Strategy for Rural and Remote Communities

ERIC Educational Resources Information Center

Price, Anne; Jackson-Barrett, Elizabeth

2009-01-01

The North West Early Childhood and Primary Teacher Workforce Development Strategy offers students in the Pilbara and Kimberley the opportunity to enrol in a Western Australian University's fully accredited Bachelor of Education (Early Childhood and Primary) part time and externally--so they can continue to live and work in their communities. The…

An algebra of discrete event processes

NASA Technical Reports Server (NTRS)

Heymann, Michael; Meyer, George

1991-01-01

This report deals with an algebraic framework for modeling and control of discrete event processes. The report consists of two parts. The first part is introductory, and consists of a tutorial survey of the theory of concurrency in the spirit of Hoare's CSP, and an examination of the suitability of such an algebraic framework for dealing with various aspects of discrete event control. To this end a new concurrency operator is introduced and it is shown how the resulting framework can be applied. It is further shown that a suitable theory that deals with the new concurrency operator must be developed. In the second part of the report the formal algebra of discrete event control is developed. At the present time the second part of the report is still an incomplete and occasionally tentative working paper.

Protective clothing for pesticide operators: part II--data analysis of fabric characteristics.

PubMed

Shaw, Anugrah; Schiffelbein, Paul

2016-01-01

Development of objective measurements is an important requirement for establishing performance-based standards for protective clothing used while handling pesticide. This study, the second in a two-part series, reports on the work completed to evaluate the performance of approximately 100 fabrics that are either used or have the potential to be used for garments worn by operators while applying pesticides. Part I, published separately, provides an overview of these issues and describes research undertaken to select a test chemical for use in subsequent studies. The goals of this study were first to develop a comprehensive approach to evaluate the performance of garments currently being used by pesticide operators, and second, to use the laboratory and field data in the development of performance specifications.

Experimental investigation and numerical modelling of 3D radial compressor stage and influence of the technological holes on the working characteristics

NASA Astrophysics Data System (ADS)

Matas, Richard; Syka, Tomáš; Hurda, Lukáš

2018-06-01

The article deals with a description of results from research and development of a radial compressor stage with 3D rotor blades. The experimental facility and the measurement and evaluation process is described briefly in the first part. The comparison of measured and computed characteristics can be found in the second part. The last part of this contribution is the evaluation of the rotor blades technological holes influence on the compressor stage characteristics.

Approaches to mitigate freight congestion.

DOT National Transportation Integrated Search

2008-11-20

Strong productivity gains in the U.S. economy hinge, in part, on transportation networks working efficiently. Continued development and efficient management of the nation's freight transportation system, especially highways and rail lines that connec...

Teacher Professional Development to Foster Authentic Student Research Experiences

NASA Astrophysics Data System (ADS)

Conn, K.; Iyengar, E.

2004-12-01

This presentation reports on a new teacher workshop design that encourages teachers to initiate and support long-term student-directed research projects in the classroom setting. Teachers were recruited and engaged in an intensive marine ecology learning experience at Shoals Marine Laboratory, Appledore Island, Maine. Part of the weeklong summer workshop was spent in field work, part in laboratory work, and part in learning experimental design and basic statistical analysis of experimental results. Teachers were presented with strategies to adapt their workshop learnings to formulate plans for initiating and managing authentic student research projects in their classrooms. The authors will report on the different considerations and constraints facing the teachers in their home school settings and teachers' progress in implementing their plans. Suggestions for replicating the workshop will be offered.

CIM at GE's factory of the future

NASA Astrophysics Data System (ADS)

Waldman, H.

Functional features of a highly automated aircraft component batch processing factory are described. The system has processing, working, and methodology components. A rotating parts operation installed 20 yr ago features a high density of numerically controlled machines, and is connected to a hierarchical network of data communications and apparatus for moving the rotating parts and tools of engines. Designs produced at one location in the country are sent by telephone link to other sites for development of manufacturing plans, tooling, numerical control programs, and process instructions for the rotating parts. Direct numerical control is implemented at the work stations, which have instructions stored on tape for back-up in case the host computer goes down. Each machine is automatically monitored at 48 points and notice of failure can originate from any point in the system.

Developing Intercultural Communicative Competence for the Year Abroad Experience

ERIC Educational Resources Information Center

López-Rocha, Sandra; Vailes, Fabienne

2017-01-01

Intercultural Communication Training (ICT) is crucial in the preparation of students who will study or work abroad as part of their degree programme. The promotion of key competencies will allow students to become aware of different perspectives, develop a more accurate understanding and appreciation of other cultures, and participate more…

Global Education and Education for Sustainability

ERIC Educational Resources Information Center

Scheunpflug, Annette; Asbrand, Barbara

2006-01-01

This article focuses on the relationship between development education/global education and education for sustainability. A short introduction describes the current use of the term "global education" and the different groups working and competing within this area in the development field. In the first part, the history of the concept of "global…

Exploring Careers in Environmental Protection.

ERIC Educational Resources Information Center

Cincinnati Public Schools, OH.

The career exploration program for grades 9 through 10, as part of a comprehensive K-10 career development program, attempts to develop an awareness of and appreciation for work, extend knowledge of the variety of career opportunities, and provide experiences in career areas of individual interest. The document, a collection of materials…

SHALL CHILDREN, TOO, BE FREE.

ERIC Educational Resources Information Center

LANE, HOWARD A.

DEFECTS IN THE FUNCTIONING OF THE PERSONALITY CAN DEVELOP IN CHILDREN. TO KEEP HIS SPIRIT NOURISHED, THE CHILD NEEDS AFFECTION, FRIENDSHIP, FREEDOM, FAITH, AND CHALLENGE FROM HIS PARENTS. SELF-RESPECT IS ANOTHER QUALITY WHICH SHOULD BE DEVELOPED IN CHILDREN AS AN ESSENTIAL PART OF THEIR GOOD MENTAL HEALTH. PROVIDING WORK EXPERIENCES AROUND THE…

Outdoor Learning and Sustainability Education

ERIC Educational Resources Information Center

Fleming, Margaret; Dawson, Richard

2013-01-01

A shared conference presentation describes two ways of bringing education for sustainable development into education. The first part concentrated on putting science into outdoor learning backed up by a series of mind-mapping activities. The second was about linking schools with their surrounding communities to develop ways of working together. An…

Independent Career Education. Grades 9-10.

ERIC Educational Resources Information Center

Cincinnati Public Schools, OH.

The career exploration program for grades 9 through 10, as part of a comprehensive K through 10 career development program, attempts to develop an awareness of and appreciation for work, extend knowledge of the variety of career opportunities, and provide experiences in career areas of individual interest. The document, a collection of materials…

Issues in Work-Related Education. EAE605 Human Resource Development.

ERIC Educational Resources Information Center

Deakin Univ., Victoria (Australia).

This publication is part of the study materials for the one-semester distance education unit, Human Resource Development, in the Open Campus Program at Deakin University (Australia). It contains three essays that explore the approaches to learning currently modeled within industry. "Training for Women" (Kathy MacDermott) presents the…

A Wish List for Molecular Tests

PubMed Central

CARLSON, BOB

2007-01-01

Companion diagnostics improve health outcomes, say developers, who are willing to work with payers to develop medical policies for coverage. Payers and clinicians want more evidence of long-term benefit. The FDA, meanwhile, is jostling for regulatory control. How long will patients have to wait? Part 2 of 2. PMID:22478689

18 CFR 4.33 - Limitations on submitting applications.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Application for Preliminary Permit, License or Exemption... preliminary permit for project works that: (1) Would develop, conserve, and utilize, in whole or in part, the same water resources that would be developed, conserved, and utilized by a project for which there is...

18 CFR 4.33 - Limitations on submitting applications.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Application for Preliminary Permit, License or Exemption... preliminary permit for project works that: (1) Would develop, conserve, and utilize, in whole or in part, the same water resources that would be developed, conserved, and utilized by a project for which there is...

18 CFR 4.33 - Limitations on submitting applications.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Application for Preliminary Permit, License or Exemption... preliminary permit for project works that: (1) Would develop, conserve, and utilize, in whole or in part, the same water resources that would be developed, conserved, and utilized by a project for which there is...

18 CFR 4.33 - Limitations on submitting applications.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Application for Preliminary Permit, License or Exemption... preliminary permit for project works that: (1) Would develop, conserve, and utilize, in whole or in part, the same water resources that would be developed, conserved, and utilized by a project for which there is...

18 CFR 4.33 - Limitations on submitting applications.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Application for Preliminary Permit, License or Exemption... preliminary permit for project works that: (1) Would develop, conserve, and utilize, in whole or in part, the same water resources that would be developed, conserved, and utilized by a project for which there is...

Recent developments in chemical decontamination technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, C.J.

1995-03-01

Chemical decontamination of parts of reactor coolant systems is a mature technology, used routinely in many BWR plants, but less frequently in PWRs. This paper reviews recent developments in the technology - corrosion minimization, waste processing and full system decontamination, including the fuel. Earlier work was described in an extensive review published in 1990.

Exploring Careers in Health and Medicine.

ERIC Educational Resources Information Center

Cincinnati Public Schools, OH.

The career exploration program for grades 9 through 10, as part of a comprehensive K through 10 career development program, attempts to develop an awareness of and appreciation for work, extend knowledge of the variety of career opportunities, and provide experiences in career areas of individual interest. The document, a collection of materials…

Exploring Careers in Visual Advertising Services.

ERIC Educational Resources Information Center

Cincinnati Public Schools, OH.

The career exploration program for grades 9 through 10, as part of a comprehensive K through 10 career development program, attempts to develop an awareness of and appreciation for work, extend knowledge of the variety of career opportunities, and provide experiences in career areas of individual interest. The document, a collection of materials…

Teaching Wellness Concepts Using Mosston's Spectrum of Teaching Styles

ERIC Educational Resources Information Center

Wilkinson, Carol; Pennington, Todd; Zanandrea, Maria

2011-01-01

Teaching wellness principles in secondary physical education classes has become an important aspect of physical education as teachers work to help their students develop lifelong healthy lifestyle habits. Many schools now have a required wellness/fitness component as part of their state core requirements. Having developed their teaching skills by…

Defining the "D" in ISD. Part 1: Task-General Instructional Methods.

ERIC Educational Resources Information Center

Clark, Ruth Colvin

1986-01-01

The first of two articles designed to provide guidelines for the instructional development phase of instructional systems development focuses on general instructional methods supporting all instructional tasks. Teaching methods that support selective attention, processing in working memory, and connecting in long-term memory are described and…

Exploring Careers in Ornamental Horticulture.

ERIC Educational Resources Information Center

Cincinnati Public Schools, OH.

The career exploration program for grades 9 through 10, as part of a comprehensive K through 10 career development program, attempts to develop an awareness of and appreciation for work, extend knowledge of the variety of career opportunities, and provide experiences in career areas of individual interest. The document, a collection of materials…

Nurses' Experiences of End-of-life Photography in NICU Bereavement Support.

PubMed

Martel, Sara; Ives-Baine, Lori

2018-06-07

To qualitatively explore neonatal intensive care nurses' experiences with end-of-life photography as part of their bereavement support work with families. An Interpretive Phenomenological Analysis with data collected through a focus group (n = 6) and one semi-structured interview (n = 1) with neonatal nurses from a Level 3/4 NICU in a Canadian pediatric hospital. Participants' comfort with EOL photography developed over time through exposure to bereavement scenarios and positive experiences with families. Participants' experienced a feeling of pressure to balance the photography with clinical responsibilities and find the right time to introduce photography while being sensitive to family experiences. Participants experienced EOL photography as something tangible to give families and were satisfied knowing the images might play an important role in the family's healing after the NICU. All participants had come to value EOL photography as a positive and meaningful part of their work with bereaved families. Identified challenges related to balancing the practice with the unpredictable flow and demands of critical care and to developing an appreciation for and comfort with the photography as part of their healing and the families' healing. Findings contribute insight into care-provider experience that can inform best practices, training, and staff support for palliative and bereavement work in neonatal and pediatric settings. The findings suggest a need to support nurses emotionally and clinically in carrying out this photography as part of their care for families. Copyright © 2018 Elsevier Inc. All rights reserved.

Managing EEE part standardisation and procurement

NASA Astrophysics Data System (ADS)

Serieys, C.; Bensoussan, A.; Petitmangin, A.; Rigaud, M.; Barbaresco, P.; Lyan, C.

2002-12-01

This paper presents the development activities in space components selection and procurement dealing with a new data base tool implemented at Alcatel Space using TransForm softwaa re configurator developed by Techform S.A. Based on TransForm, Access Ingenierie has devv eloped a software product named OLG@DOS which facilitate the part nomenclatures analyses for new equipment design and manufacturing in term of ACCESS data base implementation. Hi-Rel EEE part type technical, production and quality information are collected and compiled usingproduction data base issued from production tools implemented for equipment definition, description and production based on Manufacturing Resource Planning (MRP II Control Open) and Parametric Design Manager (PDM Work Manager). The analysis of any new equipment nomenclature may be conducted through this means for standardisation purpose, cost containment program and management procurement activities as well as preparation of Component reviews as Part Approval Document and Declared Part List validation.

SWMM5 Application Programming Interface and PySWMM: A ...

EPA Pesticide Factsheets

In support of the OpenWaterAnalytics open source initiative, the PySWMM project encompasses the development of a Python interfacing wrapper to SWMM5 with parallel ongoing development of the USEPA Stormwater Management Model (SWMM5) application programming interface (API). ... The purpose of this work is to increase the utility of the SWMM dll by creating a Toolkit API for accessing its functionality. The utility of the Toolkit is further enhanced with a wrapper to allow access from the Python scripting language. This work is being prosecuted as part of an Open Source development strategy and is being performed by volunteer software developers.

Experimental Approaches to Assessing the Impact of a ...

EPA Pesticide Factsheets

Symposium Paper The US EPA, as part of the CRTI project team, is currently working to assess the impacts of an urban radiological dispersion device (RDD) and develop containment and decontamination strategies.

Big Hat, No Cattle: Managing Human Resources, Part 1.

ERIC Educational Resources Information Center

Skinner, Wickham

1982-01-01

Presents an in-depth analysis of problems and a suggested approach to developing human resources which goes beyond identifying symptoms and provides a comprehensive perspective for building an effective work force. (JOW)

Medical electromechatronics

NASA Astrophysics Data System (ADS)

Osipov, Y. M.; Syryamkin, V. I.; Osipov, O. Y.

2015-11-01

The first part of the article presentsdevices of rehabilitation electromechatronics.As a research work, the author's team has performed sketch and technical developments on this subject, which are protected by patents of the Russian Federation. The second part providesan overview of medical robotic surgery, which is ideal for imperfections removing.It also describes capabilities of the author's team in development of active driveline based "iron" hands.Scalpels never tremble in the iron hands, which are not afraid of the aftershocks and never get tired.They can perform operations during not less than 48 consecutive hours.

Project Summary Report

NASA Technical Reports Server (NTRS)

Upchurch, Christopher

2011-01-01

The project, being the development of resource management applications, consisted entirely of my own effort. From deliverable requirements provided by my mentor, and some functional requirement additions generated through design reviews, It was my responsibility to implement the requested features as well as possible, given the resources available. For the most part development work consisted of database programming and functional testing using real resource data. Additional projects I worked on included some firing room console training, configuring the new NE-A microcontroller development lab network, mentoring high school CubeSat students, and managing the NE interns' component of the mentor appreciation ceremony.

Work, obesity, and occupational safety and health.

PubMed

Schulte, Paul A; Wagner, Gregory R; Ostry, Aleck; Blanciforti, Laura A; Cutlip, Robert G; Krajnak, Kristine M; Luster, Michael; Munson, Albert E; O'Callaghan, James P; Parks, Christine G; Simeonova, Petia P; Miller, Diane B

2007-03-01

There is increasing evidence that obesity and overweight may be related, in part, to adverse work conditions. In particular, the risk of obesity may increase in high-demand, low-control work environments, and for those who work long hours. In addition, obesity may modify the risk for vibration-induced injury and certain occupational musculoskeletal disorders. We hypothesized that obesity may also be a co-risk factor for the development of occupational asthma and cardiovascular disease that and it may modify the worker's response to occupational stress, immune response to chemical exposures, and risk of disease from occupational neurotoxins. We developed 5 conceptual models of the interrelationship of work, obesity, and occupational safety and health and highlighted the ethical, legal, and social issues related to fuller consideration of obesity's role in occupational health and safety.

Development and Engineering Design in Support of "Rover Ranch": A K-12 Outreach Software Project

NASA Technical Reports Server (NTRS)

Pascali, Raresh

2003-01-01

A continuation of the initial development started in the summer of 1999, the body of work performed in support of 'ROVer Ranch' Project during the present fellowship dealt with the concrete concept implementation and resolution of the related issues. The original work performed last summer focused on the initial examination and articulation of the concept treatment strategy, audience and market analysis for the learning technologies software. The presented work focused on finalizing the set of parts to be made available for building an AERCam Sprint type robot and on defining, testing and implementing process necessary to convert the design engineering files to VRML files. Through reverse engineering, an initial set of mission critical systems was designed for beta testing in schools. The files were created in ProEngineer, exported to VRML 1.0 and converted to VRML 97 (VRML 2.0) for final integration in the software. Attributes for each part were assigned using an in-house developed JAVA based program. The final set of attributes for each system, their mutual interaction and the identification of the relevant ones to be tracked, still remain to be decided.

Let My Country Awake. The Human Role in Development: Thoughts on the Next Ten Years.

ERIC Educational Resources Information Center

Adiseshiah, Malcolm S.

This book is divided into four parts: (1) Development and the minds of men, (2) Development: alpha and omega, (3) The cross-roads, and (4) Unesco at work: three places, three functions and a state of mind. Development theory and practice involves evaluation and judgment on the good society, on the good life for men and nations. In its broadest…

Job sharing for women pharmacists in academia.

PubMed

Rogers, Kelly C; Finks, Shannon W

2009-11-12

The pharmacist shortage, increasing numbers of female pharmacy graduates, more pharmacy schools requiring faculty members, and a lower percentage of female faculty in academia are reasons to develop unique arrangements for female academic pharmacists who wish to work part-time. Job sharing is an example of a flexible alternative work arrangement that can be successful for academic pharmacists who wish to continue in a part-time capacity. Such partnerships have worked for other professionals but have not been widely adopted in pharmacy academia. Job sharing can benefit the employer through retention of experienced employees who collectively offer a wider range of skills than a single employee. Benefits to the employee include balanced work and family lives with the ability to maintain their knowledge and skills by remaining in the workforce. We discuss the additional benefits of job-sharing as well as our experience in a non-tenure track job-sharing position at the University of Tennessee College of Pharmacy.

Automatic control system of high precision welding of workpieces in mechanical engineering

NASA Astrophysics Data System (ADS)

Kuznetsov, I. N.; Zvezdin, V. V.; Israfilov, I. H.; Portnov, S. M.

2014-12-01

In this paper, based on the conducted patent research, the system of laser welding control with different geometry of weld and shapes of parts is developed. The method of monitoring the position of the spot of laser radiation in relation to the curved weld is worked out; it is based on the tracking the edges of the welded parts by low-power laser radiation reflected from the surface of the parts. It allows to make the positioning of the focus of laser radiation in relation to the juncture of the welded parts automatically.

The Development of Nanotechnologies and Advanced Materials Industry in Science and Entrepreneurship: Socioeconomic and Technical Indicators. A Case Study of Latvia (Part One)

NASA Astrophysics Data System (ADS)

Geipele, I.; Geipele, S.; Staube, T.; Ciemleja, G.; Zeltins, N.

2016-08-01

The present scientific paper is the first part of two publications, where the authors obtain results from the scientific research presented in a series of works on the development of the nanotechnologies and advanced materials industry in science and entrepreneurship in Latvia. The study has a focus on finding proper socioeconomic and technical indicators. It provides resume on a scope of the study. The paper contains the developed structure of engineering economic indicator system, determined groups of indicators for assessment of the development of nanotechnologies and advanced materials industry in Latvia and results of the evaluation of the obtained statistics on the economic indicators.

A Case Study of Coordination in Distributed Agile Software Development

NASA Astrophysics Data System (ADS)

Hole, Steinar; Moe, Nils Brede

Global Software Development (GSD) has gained significant popularity as an emerging paradigm. Companies also show interest in applying agile approaches in distributed development to combine the advantages of both approaches. However, in their most radical forms, agile and GSD can be placed in each end of a plan-based/agile spectrum because of how work is coordinated. We describe how three GSD projects applying agile methods coordinate their work. We found that trust is needed to reduce the need of standardization and direct supervision when coordinating work in a GSD project, and that electronic chatting supports mutual adjustment. Further, co-location and modularization mitigates communication problems, enables agility in at least part of a GSD project, and renders the implementation of Scrum of Scrums possible.

Rufus of Ephesus and his contribution to the development of anatomical nomenclature.

PubMed

Bujalkova, Maria

2011-01-01

Rufus of Ephesus, a famous ancient physician, lived about the years 80 - 150 CE. His theories stressed the importance of anatomy and he preferred pragmatic approach to diagnosis and treatment. In his work "On the Names of the Parts of the Human Body", he put in pragmatic effort to make a lexicon of anatomy for his pupils. In the introduction, he described it as a manual for the students of medical art which relied on demonstration in teaching; visible (outer) parts of the body were shown on a demonstrator and invisible (inner) parts were shown on a dissected monkey. The brief explanation of the anatomical terms includes position, shape, and functions of organs, and this is what makes his work a pioneering effort to explain the anatomy clearly, systematically, and using consistent terminology. Rufus stressed the importance of exact nomenclature to prevent misunderstandings in medical practice. This anatomy manual had a major influence on the development of anatomical terminology. It is an important contribution to the history of teaching. The other essential contribution of Rufus' lexicon (also known for its briefer title Onomastikon) is that the author recognised and critically reviewed the knowledge and views of his predecessors, physicians of the pre-Galenic period. No less important was his teaching to anatomists and physicians who followed, as they often cited or paraphrased Rufus in their own works (Galen, Oribasius). Many fragments of Rufus' work have been preserved by medieval Arabic medical writers, especially by Rhazes.

Women and men coal miners: coping with gender integration underground

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yount, K.R.

The central purpose of this research is to initiate a theoretical understanding of the integration of women into traditionally-male, physical-labor jobs. The primary sources of data consist of in depth interviews with women and men underground coal miners and company personnel, and field notes collected during participant observation work in mining communities. Part I addresses the relationship between conditions of production and modes of interaction in underground mines. Personality traits conceived as aspects of masculinity are traced to efforts to cope with the stressors of engaging in physical labor in a work setting characterized by lack of work autonomy, amore » high degree of threat, and a high degree of interdependence for task accomplishment. Part II focuses on situational and individual factors affecting the integration of women in the workplace. Although most women miners are satisfied with their work, a gender based division of labor has arisen in which women are concentrated in low-prestige laborer positions. The processes involved in undermining a woman's work reputation and self-concept are summarized and forms of discrimination that recreate aspects of the female sterotype and lead to the development of sex segregation in the workplace are to the development of sex segregation in the workplace are discussed.« less

Resources. An Overview of the University of Kentucky Community College System, Part Six.

ERIC Educational Resources Information Center

Kentucky Univ., Lexington. Community Coll. System.

The Commission to Study the Future of Community Colleges in Kentucky was established in 1988 to review the accomplishments of the Kentucky Community College System (KCCS) and to provide direction for the KCCS towards the year 2000. Developed as part of a collection of reports on the KCCS for use by the Commission in its work, this report provides…

The Assessment of Business and Industry Needs; Phase II of Multi-County Assessment of Adult Needs Project (MAP).

ERIC Educational Resources Information Center

Ferguson, L. G.; And Others

In order to assess the felt needs and interests of the local population and business community relative to education and training, a survey was designed and implemented in the four-county area surrounding Waco, Texas. This volume, part two of a three part series, documents the work done in developing and conducting the business and industry…

The Assessment of Adult Needs; Phase I of Multi-County Assessment of Adult Needs Project (MAP).

ERIC Educational Resources Information Center

Ferguson, L. G.; And Others

In order to assess the felt needs and interests of the local population and business community relative to education and training, a survey was designed and implemented in the four-county area surrounding Waco, Texas. This volume, part one of a three part series documents the work done in developing and conducting the community needs assessment…

To the Moon!--A Launch Pad for Encouraging Students to Express Their Opinions

ERIC Educational Resources Information Center

Burkhalter, Nancy

2011-01-01

In this article, the author discusses a four-part exercise called "To the Moon!" The exercise encourages students to develop and orally defend their choice of four volunteers who will be part of a team to colonize Earth's moon. This oral exercise prepares them for subsequent written work. As Bean (1996, 7) states, "Good writing...grows out of good…

Development of white matter microstructure in relation to verbal and visuospatial working memory—A longitudinal study

PubMed Central

Fjell, Anders M.; Tamnes, Christian K.; Grydeland, Håkon; Due-Tønnessen, Paulina; Bjørnerud, Atle; Sampaio-Baptista, Cassandra; Andersson, Jesper; Johansen-Berg, Heidi; Walhovd, Kristine B.

2018-01-01

Working memory capacity is pivotal for a broad specter of cognitive tasks and develops throughout childhood. This must in part rely on development of neural connections and white matter microstructure maturation, but there is scarce knowledge of specific relations between this and different aspects of working memory. Diffusion tensor imaging (DTI) enables us to study development of brain white matter microstructure. In a longitudinal DTI study of 148 healthy children between 4 and 11 years scanned twice with an on average 1.6 years interval, we characterized change in fractional anisotropy (FA), mean (MD), radial (RD) and axial diffusivity (AD) in 10 major white matter tracts hypothesized to be of importance for working memory. The results showed relationships between change in several tracts and change in visuospatial working memory. Specifically, improvement in visuospatial working memory capacity was significantly associated with decreased MD, RD and AD in inferior longitudinal fasciculus (ILF), inferior fronto-occipital fasciculus (IFOF) and uncinate fasciculus (UF) in the right hemisphere, as well as forceps major (FMaj). No significant relationships were found between change in DTI metrics and change in verbal working memory capacity. These findings yield new knowledge about brain development and corresponding working memory improvements in childhood. PMID:29689058

Breakup of loosely bound nuclei at intermediate energies for nuclear astrophysics and the development of a position sensitive microstrip detector system and its readout electronics using ASICs technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tribble, Robert E.; Sobotka, Lee G.; Blackmon, Jeff C.

2015-12-29

The work performed under this grant has led to the development of a detection system that will be used to measure reaction rates for proton or neutron capture reactions at stellar energies on radioactive ions far from stability. The reaction rates are needed to better understand the physics of nucleosynthesis in explosive stellar processes such as supernovae and x-ray burst events. The radioactive ions will be produced at the Radioactive Ion Beam Facility (RIBF) at RIKEN near Tokyo, Japan. During the course of this work, the group involved in this project has expanded by several institutions in Europe and Japanmore » and now involves collaborators from the U.S., Japan, Hungary, Romania, Germany, Spain, Italy, China, and South Korea. As part of the project, a novel design based on large-area silicon detectors has been built and tested and the performance characterized in a series of tests using particle beams with a variety of atomic numbers at the Cyclotron Institute of Texas A&M University and the Heavy Ion Medical Accelerator in Chiba facility (HIMAC) in Chiba, Japan. The work has involved mechanical construction of a special purpose vacuum chamber, with a precision mounting system for the silicon detectors, development of a new ASICs readout system that has applications with a wide variety of silicon detector systems, and the development of a data acquisition system that is integrated into the computer system being used at RIBF. The parts noted above that are needed to carry out the research program are completed and ready for installation. Several approved experiments that will use this system will be carried out in the near future. The experimental work has been delayed due to a large increase in the cost and availability of electrical power for RIBF that occurred following the massive earthquake and tsunami that hit Japan in the spring of 2011. Another component of the research carried out with this grant involved developing the theoretical tools that are required to extract the information from the experiments that is needed to determine the stellar reaction rates. The tools developed through this part of the work will be made freely available for general use.« less

Working Together Online to Enhance Learner Autonomy: Analysis of Learners' Perceptions of Their Online Learning Experience

ERIC Educational Resources Information Center

Eneau, Jerome; Develotte, Christine

2012-01-01

This study concerns the development of autonomy in adult learners working on an online learning platform as part of a professional master's degree programme in "French as a Foreign Language". Our goal was to identify the influence of reflective and collaborative dimensions on the construction of autonomy for online learners in this programme. The…

Writing a Mixed Methods Report in Social Work Research

ERIC Educational Resources Information Center

Bronstein, Laura R.; Kovacs, Pamela J.

2013-01-01

This article briefly chronicles the development of mixed methods research and its use in social work. We then move onto a discussion of terms and designs, reasons for (and for not) using mixed methods. Drawing upon exemplars, we address how to write up a mixed methods study when (1) the sample is single; single for one part, with a subset for the…

School-to-Work Transition Is Now Law. AACC Letter, Special Issue #1.

ERIC Educational Resources Information Center

Pierce, Dave

This special edition of the "AACC Letter" is part of a continuing effort by the AACC to keep community colleges current with developments related to the School-To-Work (STW) Transition legislation, which President Clinton signed into law on May 4, 1994. The newsletter begins with a summary of the AACC's efforts to influence bill language…

Challenges in Pre-Tertiary Education in South Africa: Is School Social Work Part of the Solution?

ERIC Educational Resources Information Center

Pretorius, Edmarié

2016-01-01

Schools are seen as primary contributors to the social development of learners. Apart from the questionable quality of education in South Africa, the developmental and social challenges faced by learners and educators within schools in South Africa are diverse. These challenges fall within the domain of social work practice. For more than a…

Self-Efficacy Beliefs of Pre-Service Science Teachers on Fieldtrips

ERIC Educational Resources Information Center

Köksal, Ela Ayse

2018-01-01

Science is comprised of theory and practical work and to study either part is not enough to understand the whole. Practical work such as observation and fieldtrips should be used to develop students' inquiry skills as well as to support the theory. Teachers with high self-efficacy on fieldtrips will be more likely to use this technique.…

Status of neotropical migrant landbirds in the Midwest: identifying species of management concern

Treesearch

Frank R. Thompson; Stephen J. Lewis; Janet D. Green; David N. Ewert

1993-01-01

We ranked species of neotropical migrant landbirds by decreasing management concern for their viability in the Midwest. This was part of a coordinated effort by regional working groups of the Partners In Flight Program, an interagency program for the conservation of neotropical migratory birds (NTMBs). Species were ranked by seven criteria, developed by working group...

Educational Work of the Boy Scouts. Bulletin, 1919, No. 24

ERIC Educational Resources Information Center

Barclay, Lorne W.

1919-01-01

Scouting has been described as the process of making real boys into real men by a real program that works. This program is adapted to the boy's leisure hours, but its principles are the kind that permeate every phase of his life, becoming part and parcel of himself. Character development is the keynote of scouting. By precept and practice it…

A Study of Attitudes Associated with Retraining. Part I. Work Resource and Retraining Initiative.

ERIC Educational Resources Information Center

Miskovic, Darlene

A study was conducted to develop an understanding of retraining from the perspective of those who have experienced it--to know more about how and why they decided to undertake the process of acquiring new or additional work skills, how they learned about the alternatives available to them, and what feelings accompanied this experience. Research…

Teaching Data Analysis to the Data-Averse: A Framework for Educators

ERIC Educational Resources Information Center

Fouché, Christa; Bartley, Allen

2016-01-01

It remains a dilemma for social work educators to teach research so that it can be embraced by students as an integral part of social work practice. This article reports on an initiative to design a research course focused on the integration of research with practice. Drawing on developments in data mining and techniques in secondary data…

Transition Works: Self-Awareness and Self-Advocacy Skills for Students in the Elementary Learning Center

ERIC Educational Resources Information Center

Merlone, Lynn; Moran, Dolores

2008-01-01

Fifth grade students with learning disabilities receive a ten-week unit on learning styles and the special education process as part of their transition to the middle school. Developed by a learning center teacher and guidance counselor, the program is derived from the literature on self-determination and from the work of Mel Levine. The…

Internal medicine specialists' attitudes towards working part-time: a comparison between 1996 and 2004

PubMed Central

Lugtenberg, Marjolein; Heiligers, Phil JM; de Jong, Judith D; Hingstman, Lammert

2006-01-01

Background Although medical specialists traditionally hold negative views towards working part-time, the practice of medicine has evolved. Given the trend towards more part-time work and that there is no evidence that it compromises the quality of care, attitudes towards part-time work may have changed as well in recent years. The aim of this paper was to examine the possible changes in attitudes towards part-time work among specialists in internal medicine between 1996 and 2004. Moreover, we wanted to determine whether these attitudes were associated with individual characteristics (age, gender, investments in work) and whether attitudes of specialists within a partnership showed more resemblance than specialists' attitudes from different partnerships. Methods Two samples were used in this study: data of a survey conducted in 1996 and in 2004. After selecting internal medicine specialists working in general hospitals in The Netherlands, the sample consisted of 219 specialists in 1996 and 363 specialists in 2004. They were sent a questionnaire, including topics on the attitudes towards part-time work. Results Internal medicine specialists' attitudes towards working part-time became slightly more positive between 1996 and 2004. Full-time working specialists in 2004 still expressed concerns regarding the investments of part-timers in overhead tasks, the flexibility of task division, efficiency, communication and continuity of care. In 1996 gender was the only predictor of the attitude, in 2004 being a full- or a part-timer, age and the time invested in work were associated with this attitude. Furthermore, specialists' attitudes were not found to cluster much within partnerships. Conclusion In spite of the increasing number of specialists working or preferring to work part-time, part-time practice among internal medicine specialists seems not to be fully accepted. The results indicate that the attitudes are no longer gender based, but are associated with age and work aspects such as the number of hours worked. Though there is little evidence to support them, negative ideas about the consequences of part-time work for the quality of care still exist. Policy should be aimed at removing the organisational difficulties related to part-time work and create a system in which part-time practice is fully integrated and accepted. PMID:17026741

Shift work and employee fatigue: implications for occupational health nursing.

PubMed

Yumang-Ross, Doreen J; Burns, Candace

2014-06-01

Long work hours and irregular shifts are part of the nation's 24-hour society and contribute to employee fatigue. Factors affecting employee fatigue are circadian rhythm, sleep quality and quantity, individual health, the environment, and work tasks. Employee fatigue contributes to accidents and injuries, and affects occupational performance, safety, and health. These findings should be used by occupational health nurses to address fatigue management and develop comprehensive fatigue management programs. Copyright 2014, SLACK Incorporated.

Working with the disabled patient: exploring student nurses views for curriculum development using a SWOT analysis.

PubMed

Willis, Diane S; Thurston, Mhairi

2015-02-01

Increased longevity will mean an increase in people presenting with cognitive and physical disabilities, such as sight loss or dementia. The Patient Rights (Scotland) Act 2011 states that health care should be patient-focussed, taking into account patient needs. This will necessitate nursing curricula to reflect the needs of people who have disabilities and equip the future workforce with knowledge and skills to provide appropriate care. This study explores student nurses' strengths and weakness when working with people with disabilities and identifies opportunities and threats to developing their knowledge and skills to meet the needs of this population. As part of a study day, students from the year one Nursing programme were asked to take part in a SWOT analysis and post comments under the categories: strengths, weakness, opportunity and threats on a central wall about working with people with disabilities. Students acknowledged some of the challenges of being disabled especially in a health setting but also believed they were developing their skills to provide holistic care that ensured autonomy. Communication was viewed as both a strength and weakness and was identified as an essential skill to working effectively with people who had a disability. Students acknowledged that clinical staff were not always experts in working with people who were disabled and welcomed the opportunity to work with experts and clients as well as being directed to resources to increase their knowledge. Integration of disability into the nursing curriculum is needed to ensure students have awareness of and the confidence to work effectively with people who have a range of cognitive and physical disabilities alongside other medical problems. Copyright © 2014 Elsevier Ltd. All rights reserved.

Psychophysiological stress in high school teachers.

PubMed

Ritvanen, Tiina; Louhevaara, Veikko; Helin, Pertri; Halonen, Toivo; Hänninen, Osmo

2003-01-01

The aim of this study was to follow psychophysiological stress over a year with four repeated measurements in full-time employed high school teachers and to compare their results with those obtained in the part-time retired teachers, gardeners and rescue workers. The subjects consisted of 17 (10 females, 7 males) full-time and 9 part-time employed teachers (7 females and 2 males) in three high schools, 12 female gardeners and 13 male rescue workers. The data on job conditions, well-being, and psychosomatic symptoms were obtained by a questionnaire. The perceived stress was recorded using a visual analogue scale. The neuroendocrine reactivity was assessed by determining the diurnal urine excretion of epinephrine and norepinephrine. Electromyography of the trapezius muscle was recorded during working days in all subjects and in full-time teachers on one day in the holiday season. Blood pressure and heart rate were measured in the morning and in the afternoon. Psychophysiological stress in the full-time employed teachers was at similar levels on all three working days in December, March and November. Recovery from psychophysiological stress of working period was observed on summer holidays. Blood pressure, static muscle tension, perceived strain, psychosomatic symptoms and epinephrine level decreased significantly during the summer holidays as compared to the working days. The full-time employed teachers reported more perceived stress and psychosomatic symptoms than the part-time retired teachers or gardeners and rescue workers. Also static muscle activity was higher in full-time teachers than in rescue workers on the working days. More emphasis should be given to prevent psychophysiolocigal stress among teachers as well as to develop stress coping methods, and part-time working systems to facilitate work ability of aging teachers.

Robot Guidance Using Machine Vision Techniques in Industrial Environments: A Comparative Review.

PubMed

Pérez, Luis; Rodríguez, Íñigo; Rodríguez, Nuria; Usamentiaga, Rubén; García, Daniel F

2016-03-05

In the factory of the future, most of the operations will be done by autonomous robots that need visual feedback to move around the working space avoiding obstacles, to work collaboratively with humans, to identify and locate the working parts, to complete the information provided by other sensors to improve their positioning accuracy, etc. Different vision techniques, such as photogrammetry, stereo vision, structured light, time of flight and laser triangulation, among others, are widely used for inspection and quality control processes in the industry and now for robot guidance. Choosing which type of vision system to use is highly dependent on the parts that need to be located or measured. Thus, in this paper a comparative review of different machine vision techniques for robot guidance is presented. This work analyzes accuracy, range and weight of the sensors, safety, processing time and environmental influences. Researchers and developers can take it as a background information for their future works.

Robot Guidance Using Machine Vision Techniques in Industrial Environments: A Comparative Review

PubMed Central

Pérez, Luis; Rodríguez, Íñigo; Rodríguez, Nuria; Usamentiaga, Rubén; García, Daniel F.

2016-01-01

In the factory of the future, most of the operations will be done by autonomous robots that need visual feedback to move around the working space avoiding obstacles, to work collaboratively with humans, to identify and locate the working parts, to complete the information provided by other sensors to improve their positioning accuracy, etc. Different vision techniques, such as photogrammetry, stereo vision, structured light, time of flight and laser triangulation, among others, are widely used for inspection and quality control processes in the industry and now for robot guidance. Choosing which type of vision system to use is highly dependent on the parts that need to be located or measured. Thus, in this paper a comparative review of different machine vision techniques for robot guidance is presented. This work analyzes accuracy, range and weight of the sensors, safety, processing time and environmental influences. Researchers and developers can take it as a background information for their future works. PMID:26959030

Addressing the Barriers to Agile Development in DoD

DTIC Science & Technology

2015-05-01

Acquisition Small, Frequent Releases Iteratively Developed Review Working Software Vice Extensive Docs Responsive to Changes...Distribution Unlimited. Case Number 15-1457’ JCIDS IT Box Model  Streamlined requirements process for software >$15M  JROC approves IS-ICD...Services (FAR Part 37) Product-based Pay for the time and expertise of an Agile development contractor Contract for a defined software delivery

Features of a Post-Identitarian Pedagogy (with Reference to Postgraduate Student Writing and the Continuing Professional Development of Teachers)

ERIC Educational Resources Information Center

Done, Elizabeth; Knowler, Helen

2013-01-01

This article responds to Aitchson's observation that development of new pedagogic practices for teaching writing is inhibited by lack of research into how such pedagogies work in practice. The article refers to research into the introduction of a module, "Writing as Professional Development", on a part-time master's-level programme for…

Using O*NET Based Higher Education Job Descriptions for Resume Development

ERIC Educational Resources Information Center

Manzi, P. A.; Roe, J.; Pierre-Louis, D.

2011-01-01

The purpose of this three part article is to illustrate to career development professionals and students who are graduates of higher education MS and Ed.D/Ph.D programs, how to use the O*NET to develop an effective resume. The O*NET provides detailed information about work tasks, knowledge and skills, and in some titles, tools and technology where…

The Development of Further Education VI. Coombe Lodge Report, Vol. 8 No. 14. Study Conferences 75/39 A & B.

ERIC Educational Resources Information Center

Andrews, Philippa, Ed.

The conferences were part of a series on postsecondary education policy in Britain. Participants studied the work of the previous conferences and synthesized their main lines of thought. Proceedings included: further education and the development of an industrial society (C. Barnett); further education and industry in the development of a better…

Exploring Children's Thinking. Part 1: The Development of Classification (Preschool - Third Grade).

ERIC Educational Resources Information Center

Alward, Keith R.

This unit of the Flexible Learning System (FLS), the first of a 3-volume series on children's thinking, discusses the development of classification in children between 3 and 8 years of age. The series is based on the application of Jean Piaget's work to early childhood education. The development of classification is revealed in the way children…

Part-time careers in academic internal medicine: a report from the association of specialty professors part-time careers task force on behalf of the alliance for academic internal medicine.

PubMed

Linzer, Mark; Warde, Carole; Alexander, R Wayne; Demarco, Deborah M; Haupt, Allison; Hicks, Leroi; Kutner, Jean; Mangione, Carol M; Mechaber, Hilit; Rentz, Meridith; Riley, Joanne; Schuster, Barbara; Solomon, Glen D; Volberding, Paul; Ibrahim, Tod

2009-10-01

To establish guidelines for more effectively incorporating part-time faculty into departments of internal medicine, a task force was convened in early 2007 by the Association of Specialty Professors. The task force used informal surveys, current literature, and consensus building among members of the Alliance for Academic Internal Medicine to produce a consensus statement and a series of recommendations. The task force agreed that part-time faculty could enrich a department of medicine, enhance workforce flexibility, and provide high-quality research, patient care, and education in a cost-effective manner. The task force provided a series of detailed steps for operationalizing part-time practice; to do so, key issues were addressed, such as fixed costs, malpractice insurance, space, cross-coverage, mentoring, career development, productivity targets, and flexible scheduling. Recommendations included (1) increasing respect for work-family balance, (2) allowing flexible time as well as part-time employment, (3) directly addressing negative perceptions about part-time faculty, (4) developing policies to allow flexibility in academic advancement, (5) considering part-time faculty as candidates for leadership positions, (6) encouraging granting agencies, including the National Institutes of Health and Veterans Administration, to consider part-time faculty as eligible for research career development awards, and (7) supporting future research in "best practices" for incorporating part-time faculty into academic departments of medicine.

Valley Forge alternative transportation feasibility study

DOT National Transportation Integrated Search

2004-06-01

NPS, as part of their General Management Plan (GMP) realignment, worked with Volpe to develop a series of alternative transportation methods in Valley Forge National Historical Park. Automobiles are the predominant means of transportation in the park...

Chinese Undergraduate Students' Work Values: The Role of Parental Work Experience and Part-Time Work Quality

ERIC Educational Resources Information Center

Cheung, Francis Yue-lok; Tang, Catherine So-kum

2012-01-01

In this study, the authors investigated the association of perceived parental job insecurity and students' part-time work quality on work values among 341 Hong Kong Chinese undergraduate students. Correlation and regression results showed that work values were strongly related to students' part-time work satisfaction and work quality. In…

The Integration of Climate Science and Collaborative Processes in Building Regional Climate Resiliency in Southeast Florida

NASA Astrophysics Data System (ADS)

Jurado, J.

2016-12-01

Southeast Florida is widely recognized as one of the most vulnerable regions in the United States to the impacts of climate change, especially sea level rise. Dense urban populations, low land elevations, flat topography, complex shorelines and a porous geology all contribute to the region's challenges. Regional and local governments have been working collaboratively to address shared climate mitigation and adaptation concerns as part of the four-county Southeast Florida Regional Climate Change Compact (Compact). This partnership has emphasized, in part, the use of climate data and the development of advanced technical tools and visualizations to help inform decision-making, improve communications, and guide investments. Prominent work products have included regional vulnerability maps and assessments, a unified sea level rise projection for southeast Florida, the development and application of hydrologic models in scenario planning, interdisciplinary resilient redesign planning workshops, and the development of regional climate indicators. Key to the Compact's efforts has been the engagement and expertise of academic and agency partners, including a formal collaboration between the Florida Climate Institute and the Compact to improve research and project collaborations focused on southeast Florida. This presentation will focus on the collaborative processes and work products that have served to accelerate resiliency planning and investments in southeast Florida, with specific examples of how local governments are using these work products to modernize agency processes, and build support among residents and business leaders.

Are Interpersonal Relationships Necessary for Developing Trust in Online Group Projects?

ERIC Educational Resources Information Center

Wade, Christine E.; Cameron, Bruce A.; Morgan, Kari; Williams, Karen C.

2011-01-01

Trust between group members has been suggested as an important part of small group work in online classrooms. Developing interpersonal relationships with group members may promote a sense of trust among them; however, research shows mixed results. The current study explored how students' perceptions of the importance of interpersonal relationships…

Exploring Careers in Graphic Reproduction and Printing Occupations.

ERIC Educational Resources Information Center

Cincinnati Public Schools, OH.

The career exploration program for grades 9 through 10, as part of a comprehensive K through 10 career development program, attempts to develop an awareness of and appreciation for work, extend knowledge of the variety of career opportunities, and provide experiences in career areas of individual interest. The document, a collection of materials…

Communication: An Arena of Development. Advances in Applied Developmental Psychology, Volume 19.

ERIC Educational Resources Information Center

Budwig, Nancy, Ed.; Uzgiris, Ina C., Ed.; Wertsch, James V., Ed.

This volume compiles papers from a 1996 conference on communication held at Clark University (Worcester, Massachusetts). The goal of the conference was to share the work and ideas regarding the development of communication and meaning comprehension. The papers are organized into three parts, covering the organization and the origins of…

Reflection--A Method for Organisational and Individual Development

ERIC Educational Resources Information Center

Randle, Hanne; Tilander, Kristian

2007-01-01

This paper presents how organisational development can be the results when politicians, managers, social workers and teaching staff take part in reflection. The results are based on a government-funded initiative in Sweden for lowering sick absenteeism. Three local governments introduced reflection as a strategy to combat work related stress and a…

Feeding Management of a Child with a Handicap: A Guide for Professionals.

ERIC Educational Resources Information Center

Smith, Mary Ann Harvey; And Others

Intended for professionals from a variety of disciplines (such as nutrition, dentistry, nursing, occupational and physical therapy, speech pathology, social work, and education), the guide presents information on feeding problems of children with handicaps. Part I, which traces the development of feeding, considers in detail normal development and…

Skills for the Changing Workplace: A Business and Office Educator's Guide. Research and Development Series No. 254.

ERIC Educational Resources Information Center

Warmbrod, Catharine P.; And Others

This three-part instructional guide was developed to assist vocational instructors in business and office occupations in presenting broadly applicable, nontechnical (often called quality of work life--QWL) skills, such as interpersonal and group process skills, problem solving and decision making, planning, communications, business economics,…

Compensating the Administrative Team. The Administrative Team Career Development Series, Book 2.

ERIC Educational Resources Information Center

American Association of School Administrators, Arlington, VA.

As part of the Administrative Team Career Development Series, this booklet outlines several factors to consider in establishing compensation structures for school district administrators. Such structures must balance the needs and interests of the employee, the school system, and the public. Salary, working conditions, and fringe benefits must all…

Development of Assessment Tools To Measure Organizational Support for Employee Health.

ERIC Educational Resources Information Center

Golaszewski, Thomas; Barr, Donald; Pronk, Nico

2003-01-01

Describes one working group's attempts to develop and utilize assessment tools for measuring and changing organizational support for employee health. Originally designed as part of a heart health related intervention, the system has evolved into a managed care evaluation and major chronic disease inventory. Findings indicate the potential of…

Sustainable Landscapes Assessment for the Philippines

Treesearch

Oliver Agoncillo; Jennifer Conje; Susan Cordell; James Halperin; Roopa Karia; Beth Lebow

2011-01-01

As part of their development of a new Country Development Strategy, and with potential for incoming Sustainable Landscapes funding, USAID/Philippines commissioned the U.S. Forest Service to work with them on an assessment of efforts aimed at Reducing Emissions from Deforestation and Forest Degradation (REDD+) in the Philippines, including the role of conservation,...

Developing Self-Care Practices in a Trauma Treatment Course

ERIC Educational Resources Information Center

Shannon, Patricia J.; Simmelink-McCleary, Jennifer; Im, Hyojin; Becher, Emily; Crook-Lyon, Rachel E.

2014-01-01

This article describes the development of self-care practices of social work students who were part of a larger study of students' experiences in a graduate course on the treatment of trauma. Consensual qualitative research methods were used to analyze 17 participant journals submitted at 4 times during the course. Findings indicated that…

Professional Development of School Leaders in Cyprus: Is It Working?

ERIC Educational Resources Information Center

Michaelidou, Athena; Pashiardis, Petros

2009-01-01

School heads and assistant headteachers in Cyprus attend in-service training programmes as part of their professional development, after they are promoted to their new leadership post. A review of the literature highlights the significance of a needs analysis when designing and/or reforming in-service training programmes. Nevertheless, there seems…

Cooperative Development of the Digital Library: Identifying and Working with Potential Partners.

ERIC Educational Resources Information Center

Poland, Jean

In a university environment, the library can benefit from interest in the digital future on the part of other concerned groups. Computer science departments are natural partners in the development of digital libraries. Professional societies, for-profit companies, and foundations are also potential sources of support. Cornell University Library…

Exploring Careers in International Travel, Trade and Communications.

ERIC Educational Resources Information Center

Cincinnati Public Schools, OH.

The career exploration program for grades 9 through 10, as part of a comprehensive K through 10 career development program, attempts to develop an awareness of and appreciation for work, extend knowledge of the variety of career opportunities, and provide experiences in career areas of individual interest. The document, a collection of materials…

Exploring Careers in Building and Plant Maintenance.

ERIC Educational Resources Information Center

Cincinnati Public Schools, OH.

The career exploration program for grades 9 through 10, as part of a comprehensive K through 10 career development program, attempts to develop an awareness of and appreciation for work, extend knowledge of the variety of career opportunities, and provide experiences in career areas of individual interest. The document, a collection of materials…

Speaking the Same Language: Developing a Language-Aware Feedback Culture

ERIC Educational Resources Information Center

Lazar, Gillian; Ryder, Agi

2018-01-01

Research suggests that feedback as part of assessment is often not delivered effectively. A key aspect of effective feedback delivery is that students need to understand feedback and also feel motivated to act on it. This article explores how educational developers can incorporate a language-aware approach to feedback when working with staff…

Le Francais Courant (Contemporary French), Part II.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This course has been developed basically within the limits of Units 4-6 of "A-LM French: Level 1", second edition. The primary objectives are to develop French vocabulary relative to the family, home, transportation, and foods by continuing to work with short dialogues based on everyday, teenage experiences. While reviewing previously studied…

Exploring Careers in Writing for the Market.

ERIC Educational Resources Information Center

Cincinnati Public Schools, OH.

The career exploration program for grades 9 through 10, as part of a comprehensive K through 10 career development program, attempts to develop an awareness of and appreciation for work, extend knowledge of the variety of career opportunities, and provide experiences in career areas of individual interest. The document, a collection of materials…

Family Registration Card as electronic medical carrier in Bosnia and Herzegovina.

PubMed

Novo, Ahmed; Masic, Izet; Toromanovic, Selim; Loncarevic, Nedim; Junuzovic, Dzelaludin; Dizdarevic, Jadranka

2004-01-01

Medical documentation is a very important part of the medical documentalistics and is occupies a large part of daily work of medical staff working in Primary Health Care. Paper documentation is going to be replaced by electronic cards in Bosnia and Herzegovina and a new Health Care System is under development, based on an Electronic Family Registration Card. Developed countries proceeded from the manual and semiautomatic method of medical data processing to the new method of entering, storage, transferring, searching and protecting data, using electronic equipment. Currently, many European countries have developed a Medical Card Based Electronic Information System. Three types of electronic card are currently in use: a Hybrid Card, a Smart Card and a Laser Card. The dilemma is which card should be used as a data carrier. The Electronic Family Registration Cared is a question of strategic interest for B&H, but also a great investment. We should avoid the errors of other countries that have been developing card-based system. In this article we present all mentioned cards and compare advantages and disadvantages of different technologies.

The variation of the unitary stresses occurring in the working part in relation to the type of soil, using the finite element method

NASA Astrophysics Data System (ADS)

Chiorescu, E.; Chiorescu, D.

2017-08-01

Agriculture brings a major contribution to the sustainable development of the economy, providing food to people. Because of the continuous growth of the population, there is an ever increasing need of food worldwide. For this reason, it is necessary to study the contact between the soil and the active tool of the cultivators, in relation to the type of soil and its parameters. The physical-mechanical characteristics of the soils are influenced by the moving velocity of the working part, as well as by the humidity of the soil. The humidity triggers the change of the friction coefficient at the soil-steel contact, being of significant importance for the decrease of the working resistance of the working tools and responsible for increasing exploitation costs. The model used for the soil has a non-linear plastic behavior of the Drucker Prager type, being different from the Mises model. The programming software Ansys was used for the simulation with the finite element method, allowing the study of the behavior of the active working part, the normal stress being analyzed in real conditions, at various depths and velocities for a soil with a clay-sandy texture.

Health-related Quality of Life and Related Factors in Full-time and Part-time Workers.

PubMed

Kim, Byungsung; Kim, Wonjoon; Choi, Hyunrim; Won, Changwon; Kim, Youngshin

2012-07-01

There has been a rapid increase in the number of part-time workers in Korea with little information available on associated changes in quality of life. This study was designed to compare part-time and full-time workers in terms of the quality of life and related factors. Data were extracted from the 4th Korea National Health and Nutrition Examination Survey, conducted in 2008. Of the 1,284 participants selected, 942 were females (range, 20 to 64 years). Based on the information provided by self-administered questionnaire, subjects were categorized according to the working pattern (full-time and part-time) and working hours (<30 and ≥30 hours). Differences in socio-demographic characteristics, health-related behaviors, and job characteristics were assessed by t-test and chi-square test. EuroQol-five dimensions (EQ-5D) index was implemented in order to measure the quality of life. Differences in the EQ-5D index scores between the groups were compared by t-test, stepwise multivariate logistic regression analyses. Quality of life did not differ by work patterns. In males, the Organization for Economic Cooperation and Development part-time group was associated with poorer quality of life (odds ratio [OR], 0.49; P = 0.028). For both sexes, the non-stress group was linked with superior quality of life in comparison to the stress group (OR, 2.64; P = 0.002; OR, 2.17; P < 0.001). Female employees engaged in non-manual labor had superior quality of life than those engaged in manual labor (OR, 1.40; P = 0.027). This study concludes that working less than 30 hours per week is related to lower quality of life in comparison to working 30 hours or more in male employees in Korea.

Etiology of work-related electrical injuries: a narrative analysis of workers' compensation claims.

PubMed

Lombardi, David A; Matz, Simon; Brennan, Melanye J; Smith, Gordon S; Courtney, Theodore K

2009-10-01

The purpose of this study was to provide new insight into the etiology of primarily nonfatal, work-related electrical injuries. We developed a multistage, case-selection algorithm to identify electrical-related injuries from workers' compensation claims and a customized coding taxonomy to identify pre-injury circumstances. Workers' compensation claims routinely collected over a 1-year period from a large U.S. insurance provider were used to identify electrical-related injuries using an algorithm that evaluated: coded injury cause information, nature of injury, "accident" description, and injury description narratives. Concurrently, a customized coding taxonomy for these narratives was developed to abstract the activity, source, initiating process, mechanism, vector, and voltage. Among the 586,567 reported claims during 2002, electrical-related injuries accounted for 1283 (0.22%) of nonfatal claims and 15 fatalities (1.2% of electrical). Most (72.3%) were male, average age of 36, working in services (33.4%), manufacturing (24.7%), retail trade (17.3%), and construction (7.2%). Body part(s) injured most often were the hands, fingers, or wrist (34.9%); multiple body parts/systems (25.0%); lower/upper arm; elbow; shoulder, and upper extremities (19.2%). The leading activities were conducting manual tasks (55.1%); working with machinery, appliances, or equipment; working with electrical wire; and operating powered or nonpowered hand tools. Primary injury sources were appliances and office equipment (24.4%); wires, cables/cords (18.0%); machines and other equipment (11.8%); fixtures, bulbs, and switches (10.4%); and lightning (4.3%). No vector was identified in 85% of cases. and the work process was initiated by others in less than 1% of cases. Injury narratives provide valuable information to overcome some of the limitations of precoded data, more specially for identifying additional injury cases and in supplementing traditional epidemiologic data for further understanding the etiology of work-related electrical injuries that may lead to further prevention opportunities.

Women's Status and Fertility in Developing Countries: Son Preference and Economic Security. World Bank Staff Working Papers No. 682 and Population and Development Series No. 7.

ERIC Educational Resources Information Center

Cain, Mead

The relationship between women's status--defined in terms of the degree to which they are economically dependent on men--and fertility in developing nations is examined. After a brief introduction, part 2 discusses a particular theoretical perspective regarding fertility determinants in developing countries and explores the implications of women's…

Iminopyrimidinones: A novel pharmacophore for the development of orally active renin inhibitors

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKittrick, Brian A.; Caldwell, John P.; Bara, Thomas

2015-04-01

The development of renin inhibitors with favorable oral pharmacokinetic profiles has been a longstanding challenge for the pharmaceutical industry. As part of our work to identify inhibitors of BACE1, we have previously developed iminopyrimidinones as a novel pharmacophore for aspartyl protease inhibition. In this letter we describe how we modified substitution around this pharmacophore to develop a potent, selective and orally active renin inhibitor.

Mistrust of numbers: the difficult development of psychiatric epidemiology in France, 1940-80.

PubMed

Henckes, Nicolas

2014-08-01

This article uses archival as well as published materials to trace the development of psychiatric epidemiology in France from 1945 to 1980. Although a research programme in this field was launched in the early 1960s at the National Institute of Medical Research (INH, later renamed INSERM), psychiatric epidemiology remained an embryonic field in France during the next two decades. French researchers in this field were hampered by limited resources, but their work was primarily characterized by a deep engagement with the epistemological challenges of psychiatric epidemiology. The history of French psychiatric epidemiology in the 1960s and 1970s can be seen as an attempt to create a specifically French way of doing psychiatric epidemiology research. In the first part of this article, the author relates this unique history to internal professional dynamics during the development of psychiatric research and, more broadly, to the biomedical institutional context in which epidemiological work was being done. The next part of this article examines the conditions under which the INH research team framed epidemiological research in psychiatry in the 1960s. The last part focuses on INH's flagship psychiatric epidemiology programme, developed in cooperation with pioneers of French community psychiatry in Paris's 13th arrondissement in the 1960s. © The Author 2014; all rights reserved. Published by Oxford University Press on behalf of the International Epidemiological Association.

Toward the development of a rational scale in the use of human-figure drawings as a kindergarten screening measure.

PubMed

Goldman, R K; Velasco, M M

1980-04-01

The Draw-A-Person Test was individually administered to 120 kindergartners from diverse socioeconomic backgrounds, ranging in age from 4 yr. and 10 mo. to 6 yr. and 4 mo. This study was conducted to validate and expand Goldman and Warren's earlier work (1976) on the development of a rational scale for use as a kindergarten screening measure. Correlational analyses corroborate the earlier findings that body-part omissions are the most predictive items of emotional high risk. Factor analyses of the current data also replicate earlier findings in which two underlying cohesive factors emerged. The first factor has high loadings on peripheral body-part omissions; the second factor has high loadings on central body-part omission. The results suggest that an interchangeable number of body-part omissions together, rather than any one item, predict high emotional risk. Structural and content characteristics do not contribute significantly to the development of a kindergarten screening measure.

Safeguards and security research and development: Progress report, October 1994--September 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rutherford, D.R.; Henriksen, P.W.

The primary goal of the Los Alamos Safeguards and Security Technology Development Program, International Safeguards, and other Safeguards and Security Programs is to continue to be the center of excellence in the field of Safeguards and Security. This annual report for 1995 describes those scientific and engineering projects that contribute to all of the aforementioned programs. The authors have presented the information in a different format from previous annual reports. Part I is devoted to Nuclear Material Measurement Systems. Part II contains projects that are specific to Integrated Safeguards Systems. Part III highlights Safeguards Systems Effectiveness Evaluations and Part IVmore » is a compilation of highlights from Information Assurance projects. Finally Part V highlights work on the projects at Los Alamos for International Safeguards. The final part of this annual report lists titles and abstracts of Los Alamos Safeguards and Security Technology Development reports, technical journal articles, and conference papers that were presented and published in 1995. This is the last annual report in this format. The authors wish to thank all of the individuals who have contributed to this annual report and made it so successful over the years.« less

Multi-Element Integrated Project Planning at Kennedy Space Center

NASA Technical Reports Server (NTRS)

Mullon, Robert

2008-01-01

This presentation demonstrates how the ASRC Scheduling team developed working practices to support multiple NASA and ASRC Project Managers using the enterprise capabilities of Primavera P6 and P6 Web Access. This work has proceeded as part of Kennedy Ground Systems' preparation for its transition from the Shuttle Program to the Constellation Program. The presenters will cover Primavera's enterprise-class capabilities for schedule development, integrated critical path analysis, and reporting, as well as advanced Primavera P6 Web Access tools and techniques for communicating project status.

Children Who Desperately Want To Read, But Are Not Working at Grade Level: Use Movement Patterns As "Windows" To Discover Why. Part II: The Transverse Midline.

ERIC Educational Resources Information Center

Corso, Marjorie

This paper discusses a multi-part longitudinal study which compared the developmental movement levels and the academic learning level in young children, noting that the relationship between movement education and academic education is based on the assumption that both realms of learning are dependent on the adequate development of the brain. The…

Painting with Words.

ERIC Educational Resources Information Center

Lieberman, Barry

1983-01-01

The part that words play in teaching art has been underestimated. In a good art class, there is an interplay of ideas about the ongoing work. By using the right words, the teacher can help students develop their creative faculties. (CS)

Fourth - generation languages. Volume 2. Representative 4GLs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, J.

1986-01-01

The chapters in Part II each describe one representative product marketed by a vendor other than IBM. (Volume III of this work covers IBM languages.) The chapters in Part II cover the following 4GLs: ADS/ONLINE, APPLICATION FACTORY, DATATRIEVE, FOCUS, IDEAL, INTELLECT, MANTIS, MIMER, NATURAL, NOMAD2, RAMIS II, SYSTEM W, and USE-IT. The Perspective section of Part II presents a general overview of the product and describes its role in the marketplace. The Tutorial section describes how a user employs the language in application development.

Video observation in HIT development: lessons learned on benefits and challenges.

PubMed

Høstgaard, Anna Marie; Bertelsen, Pernille

2012-08-22

Experience shows that the precondition for the development of successful health information technologies is a thorough insight into clinical work practice. In contemporary clinical work practice, clinical work and health information technology are integrated, and part of the practice is tacit. When work practice becomes routine, it slips to the background of the conscious awareness and becomes difficult to recognize without the context to support recall. This means that it is difficult to capture with traditional ethnographic research methods or in usability laboratories or clinical set ups. Observation by the use of the video technique within healthcare settings has proven to be capable of providing a thorough insight into the complex clinical work practice and its context - including parts of the tacit practice. The objective of this paper is 1) to argue for the video observation technique to inform and improve health-information-technology development and 2) to share insights and lessons learned on benefits and challenges when using the video observation technique within healthcare settings. A multiple case study including nine case studies conducted by DaCHI researchers 2004-2011 using audio-visual, non-participant video observation for data collection within different healthcare settings. In HIT development, video observation is beneficial for 1) informing and improving system design 2) studying changes in work practice 3) identifying new potentials and 4) documenting current work practices. The video observation technique used within healthcare settings is superior to other ethnographic research methods when it comes to disclosing the complexity in clinical work practice. The insights gained are far more realistic compared to traditional ethnographic studies or usability studies and studies in clinical set ups. Besides, the data generated through video recordings provide a solid basis for dialog between the health care professionals involved. The most important lessons learned are that a well considered methodology and clear formulated objectives are imperative, in order to stay focused during the data rich analysis phase. Additionally, the video observation technique is primarily recommended for studies of specific clinical work practices within delimited clinical settings. Overall, the video observation technique has proven to be capable of improving our understanding of the interwoven relation between clinical work practice and HIT and to inform us about user requirements and needs for HIT, which is a precondition for the development of more successful HIT systems in the future.

World Café: a proactive approach to working with mentors.

PubMed

O'Connor, Megan; Cotrel-Gibbons, Liz

2017-04-27

Mentors are vital for supporting nursing students' learning in practice, but increasing demands on registered nurses can make this a challenging part of their role. This article describes how a new education team in Jersey used the World Café approach to working with mentors on a mentor update day. It explains how the café environment helped mentors to share ideas, develop opportunities to support students' learning in practice areas, increase interdepartmental working and increased communication between the education department and mentors.

ED physicians group ousted, sues--power struggle with CEO blamed.

PubMed

2007-07-01

Serious contract problems with administration should never come as a surprise. The ED manager who is part of a physicians group should communicate regularly with key audiences within the hospital, and keep an ear to the ground for potential issues. Have routine meetings with senior administration, and work to gain a seat on the hospital's executive committee. Participate in community activities with hospital leadership, including family activities. Work to develop a professional working relationship with the nurse manager.

The application of symmetry and centricity to polychordal wedge harmony in "Motherchord"

NASA Astrophysics Data System (ADS)

Cathey, Tully J.

This dissertation is in two volumes. Volume I is an analytical paper in two parts. Part I presents a polychordal harmonic system called the "The Desire Matrix Harmonic System," that was used to compose a work for large orchestra called "Motherchord" (Volume II). The polychords are comprised of two triadic units and of major triads only, built on two pairs of intersecting chromatic scales. The system embraces pitch-centric characteristics as well as symmetry. Scales, or tone sets, are derived from the polychords and used for melodic and contrapuntal purposes. Compositional procedures are developed, and a matrix of polychordal wedges is assembled that serves as a further compositional device. Part II of the paper is an analysis of the formal structure of "Motherchord." "Motherchord" is a one-movement composition of approximately seventeen minutes and forty seconds duration. It is divided into seven parts, but proceeds from beginning to end without a break in sound. The title of the work derives from the central tonic polychord.

Changing Teachers, Changing Times. Teachers' Work and Culture in the Postmodern Age. Professional Development and Practice Series.

ERIC Educational Resources Information Center

Hargreaves, Andy

This book examines the personal, moral, cultural, and political dimensions of teaching in the context of rapid and far-reaching change within teachers' work and in the world beyond it. The chapters in Part One examine the powerful forces for change in society and how those forces are exerting pressure on existing institutions. Issues such as the…

Getting beneath the Veil of Effective Schools: Evidence from New York City. NBER Working Paper No. 17632

ERIC Educational Resources Information Center

Dobbie, Will; Fryer, Roland G., Jr.

2011-01-01

Charter schools were developed, in part, to serve as an R&D engine for traditional public schools, resulting in a wide variety of school strategies and outcomes. In this paper, we collect unparalleled data on the inner-workings of 35 charter schools and correlate these data with credible estimates of each school's effectiveness. We find that…

Working Respectfully with Families: A Practical Guide for Educators and Human Service Workers. Training Module I: The Child, the Family, and the Community.

ERIC Educational Resources Information Center

Connard, Christie; And Others

Educators and service providers often have little opportunity to work cooperatively with families to enhance outcomes for children. This document is the first in a four-part training module that was developed by Northwest Regional Educational Laboratory's Child, Family, and Community Program. The modules are based on an ecological, family-centered…

The Pedagogical Structure of Methods for Thinking about the Future: The Citizens Function in Planning. Working Draft.

ERIC Educational Resources Information Center

Sandow, Stuart A.

The principal problem of this work is to discover, perhaps construct, a pedagogical process for thinking about the future that makes use of the methods of forecasting, but makes use of them to create new attitudes and understandings on the part of institutional planners. The underlying concern is to develop a way for planners to address the future…

Understanding the Impact of New Technology on Life and Work. Secondary Learning Guide 12. Project Connect. Linking Self-Family-Work.

ERIC Educational Resources Information Center

Emily Hall Tremaine Foundation, Inc., Hartford, CT.

This competency-based secondary learning guide on understanding the impact of new technology is part of a series that are adaptations of guides developed for adult consumer and homemaking education programs. The guides provide students with experiences that help them learn to do the following: make decisions; use creative approaches to solve…

International Consultation on Micro-Chip Technology: Its Impact on the Lives of Women Workers. Summary of Proceedings (Manila, Philippines, October 5-15, 1986).

ERIC Educational Resources Information Center

Participatory Research Group, Toronto (Ontario).

An international consultation was attended by 40 women workers, educators, and organizers who work directly with women affected by the new "global assembly line" that has developed as a part of the microchip technology industry. The women, who represented 12 countries, shared information and organizing experiences and worked to…

Supporting self and others: from staff nurse to nurse consultant. Part 1: chocolate and Marmite!

PubMed

Fowler, John

This series of articles explores various ways of supporting staff who work in the fast-moving and ever-changing health service. In this first article, John Fowler, an experienced nursing lecturer, author and consultant, examines the importance of developing an informal working culture of support from both the individual's perspective and from the perspective of the health service management.

Supporting self and others: from staff nurse to nurse consultant. Part 5: clinical supervision.

PubMed

Fowler, John

This series of articles explores various ways of supporting staff who work in the fast-moving and ever-changing health service. In previous articles, John Fowler an experienced nursing lecturer, author and consultant examined the importance of developing a supportive working culture and the role of preceptorship and mentoring. This article examines the use of clinical supervision within nursing.

[Observational study of craniofacial growth and development in Mexican children].

PubMed

Fijikami, T K; Cedeño Pacheco, E

1991-01-01

The election of a investigation about craniofacial growing and development in Mexican children, was done due to a lack of national information in this rubric and as a fundamental part of the "growing and development in the scholastic" module of the Universidad Autónoma Metropolitana-Xochimilco, which work hypothesis was that "craniofacial growing and development in Mexican, 6 to 12 children in Xochimilco area are due to nutritional deficiency, second dentition eruption delay and dental maloclution "which was totality confirmed in a 100 Mexican facial characteristic children field work study, with cephalometric studies which permit to determine the craniofacial growing standard. This study was corroborated with a 40 children, 4 years later follow up.

Part-time work among pediatricians expands.

PubMed

Cull, William L; O'Connor, Karen G; Olson, Lynn M

2010-01-01

The objective of this study was to track trends in part-time employment among pediatricians from 2000 to 2006 and to examine differences within subgroups of pediatricians. As part of the Periodic Survey of Fellows, national random samples of American Academy of Pediatrics members were surveyed in 2000, 2003, and 2006. These surveys shared questions concerning working part-time and other practice characteristics. Roughly 1600 pediatricians were included in each random sample. Totals of 812 (51%), 1020 (63%), and 1013 (62%) pediatricians completed the surveys in 2000, 2003, and 2006, respectively. Analyses were limited to nonretired, posttrainee pediatricians. The number of pediatricians who reported that they work part-time increased from 15% in 2000, to 20% in 2003, to 23% in 2006. The pattern of increased part-time work from 2000 to 2006 held for many subgroups, including men, women, pediatricians who were younger than 40 years, pediatricians who were aged >or=50 years, pediatricians who worked in an urban inner city, pediatricians who worked in suburban areas, general pediatricians, and subspecialist pediatricians. Those who were working part-time were more satisfied within their professional and personal activities. Part-time pediatricians worked on average 14.3 fewer hours per week in direct patient care. Increases in part-time work are apparent throughout pediatrics. The possible continued growth of part-time is an important trend within the field of pediatrics that will need to be monitored.

Developing Avionics Hardware and Software for Rocket Engine Testing

NASA Technical Reports Server (NTRS)

Aberg, Bryce Robert

2014-01-01

My summer was spent working as an intern at Kennedy Space Center in the Propulsion Avionics Branch of the NASA Engineering Directorate Avionics Division. The work that I was involved with was part of Rocket University's Project Neo, a small scale liquid rocket engine test bed. I began by learning about the layout of Neo in order to more fully understand what was required of me. I then developed software in LabView to gather and scale data from two flowmeters and integrated that code into the main control software. Next, I developed more LabView code to control an igniter circuit and integrated that into the main software, as well. Throughout the internship, I performed work that mechanics and technicians would do in order to maintain and assemble the engine.

How Schools Are Using Action Research on Practical Work, New Technologies and Research and Development to Improve Student Outcomes

ERIC Educational Resources Information Center

Davenport, Carol

2013-01-01

Three methods from different schools illustrate how the cyclic process of action research can be used to develop teaching skills. The importance of learning from successful and unsuccessful lessons or parts of lessons is emphasised as the basis for development and improvement. This process can be carried out on an individual basis but development…

The Impact of Communication and Collaboration between Test Developers and Teachers on a High-Stakes ESL Exam: Aligning External Assessment and Classroom Practices

ERIC Educational Resources Information Center

Tan, May; Turner, Carolyn E.

2015-01-01

In Quebec the high-stakes Secondary Five ESL exit writing exam developed by the Education Ministry (MELS) is administered and corrected by classroom teachers. In this distinctive situation, the MELS works toward aligning classroom-based assessment (CBA) and the writing exam by making ongoing teacher involvement part of its development and…

Automated platform for designing multiple robot work cells

NASA Astrophysics Data System (ADS)

Osman, N. S.; Rahman, M. A. A.; Rahman, A. A. Abdul; Kamsani, S. H.; Bali Mohamad, B. M.; Mohamad, E.; Zaini, Z. A.; Rahman, M. F. Ab; Mohamad Hatta, M. N. H.

2017-06-01

Designing the multiple robot work cells is very knowledge-intensive, intricate, and time-consuming process. This paper elaborates the development process of a computer-aided design program for generating the multiple robot work cells which offer a user-friendly interface. The primary purpose of this work is to provide a fast and easy platform for less cost and human involvement with minimum trial and errors adjustments. The automated platform is constructed based on the variant-shaped configuration concept with its mathematical model. A robot work cell layout, system components, and construction procedure of the automated platform are discussed in this paper where integration of these items will be able to automatically provide the optimum robot work cell design according to the information set by the user. This system is implemented on top of CATIA V5 software and utilises its Part Design, Assembly Design, and Macro tool. The current outcomes of this work provide a basis for future investigation in developing a flexible configuration system for the multiple robot work cells.

Visual working memory capacity increases between ages 3 and 8 years, controlling for gains in attention, perception, and executive control.

PubMed

Pailian, Hrag; Libertus, Melissa E; Feigenson, Lisa; Halberda, Justin

2016-08-01

Research in adults has aimed to characterize constraints on the capacity of Visual Working Memory (VWM), in part because of the system's broader impacts throughout cognition. However, less is known about how VWM develops in childhood. Existing work has reached conflicting conclusions as to whether VWM storage capacity increases after infancy, and if so, when and by how much. One challenge is that previous studies did not control for developmental changes in attention and executive processing, which also may undergo improvement. We investigated the development of VWM storage capacity in children from 3 to 8 years of age, and in adults, while controlling for developmental change in exogenous and endogenous attention and executive control. Our results reveal that, when controlling for improvements in these abilities, VWM storage capacity increases across development and approaches adult-like levels between ages 6 and 8 years. More generally, this work highlights the value of estimating working memory, attention, perception, and decision-making components together.

Anthropology in a postcolonial colony: Helen I. Safa's contribution to Puerto Rican ethnography.

PubMed

Duany, Jorge

2010-01-01

This article assesses Helen I. Safa's legacy to anthropological thought in Puerto Rico. The first part of the article locates Safa's research on the Island within a long tradition of fieldwork by U.S. scholars since the early twentieth century. More recent research, conducted mostly by Puerto Rican women anthropologists and other social scientists, has expanded upon Safa's insights on gender and work. The second part of the essay analyzes Safa's major empirical work, The Urban Poor of Puerto Rico: A Study in Development and Inequality. Above all, this book helped overcome the theoretical impasse over the culture of poverty that characterized much of urban anthropology during the 1960s and 1970s. The article concludes with an appraisal of the relevance of Safa's work for the ethnography of contemporary Puerto Rico.

Asynchronous Messaging and Data Transfer in a Spacecraft: An Implementation

NASA Technical Reports Server (NTRS)

Moholt, Joseph M.

2005-01-01

Data transfer and messaging is an important part of a spacecraft. Creating a standard protocol for messaging that can be used for a variety of applications is an extremely beneficial project at the Jet Propulsion Laboratory (JPL). The Asynchronous Messaging Service (AMS) is a protocol outlining how subsystems initialize and conduct communication between each other. There are currently two implementations of AMS in the works. At JPL, my task is to get a working implementation of AMS onto vxWorks as a proof of concept. An Autocoder, a program used to convert visually created state chart diagrams to C++, has also been created to accomplish a part of the implementation. I was assigned to make the program portable on any Unix type environment. Lastly, I was to develop a program to demonstrate messaging between two FireWire cards running vxworks.

Boscovich: his geodetic and cartographic studies.

NASA Astrophysics Data System (ADS)

Crippa, B.; Forcella, V.; Mussio, L.

The name of Ruggero Giuseppe Boscovich has many spellings: the Croatian Boscovič, linked to his Dalmatian origin, becomes Boscowich in German. Ruggero Giuseppe Boscovich lived and worked in many cities: Rome, Pavia, Venice, Paris, London, Warsaw, Saint Petersburg and Constantinople, where he carried out diplomatic missions. He was a Jesuit and studied mathematics, physics, astronomy, geodesy, and cartography. His studies in geodesy and cartography were developed in Italy: he measured the meridian between Rome and Rimini, he worked on the new map of the Papal State and he designed the Brera Observatory. In the first part of the present work, we present Boscovich's activities from a chronological point of view. In the second part, we focus on two specific arguments, related to geodesy and cartography: the new map of the Papal State and an attempt to rebuild the associated triangulation.

Nurses' motivators to work part-time.

PubMed

Jamieson, Lynn N; Williams, Leonie Mosel; Lauder, William; Dwyer, Trudy

2007-04-01

There has been a trend of growth in part-time employment within the Australian nursing workforce and currently half of the profession work part-time. While the literature across disciplines has postulated reasons behind preferences for part-time employment, little is known about nurses' motivators to work part-time. In an era of nursing shortages that form considerable barriers to meeting healthcare service demands, a clear understanding of these motivators is critical for the effective planning and management of the nursing workforce. A grounded theory study that explored the phenomenon of part-time nursing found that nurses' motivators to work part-time were complex and identifiable with nursing, establishing that nurses' working time decisions are made in contexts that may be unique to the profession. This paper provides an exhaustive description and explanation of one cohort of part-time nurses that accounts for variations between nurses and provides an understanding of the complexity of factors that contribute to nurses' decisions to work part-time.

Knowledge work productivity effect on quality of knowledge work in software development process in SME

NASA Astrophysics Data System (ADS)

Yusoff, Mohd Zairol; Mahmuddin, Massudi; Ahmad, Mazida

2016-08-01

Knowledge and skill are necessary to develop the capability of knowledge workers. However, there is very little understanding of what the necessary knowledge work (KW) is, and how they influence the quality of knowledge work or knowledge work productivity (KWP) in software development process, including that in small and medium-sized (SME) enterprise. The SME constitutes a major part of the economy and it has been relatively unsuccessful in developing KWP. Accordingly, this paper seeks to explore the influencing dimensions of KWP that effect on the quality of KW in SME environment. First, based on the analysis of the existing literatures, the key characteristics of KW productivity are defined. Second, the conceptual model is proposed, which explores the dimensions of the KWP and its quality. This study analyses data collected from 150 respondents (based on [1], who involve in SME in Malaysia and validates the models by using structural equation modeling (SEM). The results provide an analysis of the effect of KWP on the quality of KW and business success, and have a significant relevance for both research and practice in the SME

Advanced thermionic converter developments with microwave external pumping

NASA Technical Reports Server (NTRS)

Chiu, H. S.; Shaw, D. T.; Manikopulos, C. N.; Lee, C. H.

1977-01-01

This work reports ion generation in a cesium thermionic converter as part of advanced-model thermionic converter development research. A microwave with frequency in the range between 1-2 GHz is used to externally pump a thermionic converter as part of our effort in the verification of Lam's theory. It is found that the motive peak as predicted in the theory disappears whenever microwave power is used to excite the cesium plasma of the converter. The electron temperature is effectively heated by the microwave and the experimental data agrees with theory in the low-power output region.

Integral habitat transport system

NASA Technical Reports Server (NTRS)

Elliott, Bill; Frazer, Scott; Higgs, Joey; Huff, Jason; Milam, Tigree

1994-01-01

In the 1993 Fall quarter, the ME 4182 design class was sponsored to study various scenarios that needed to be studied for Martian travel. The class was sponsored by NASA and there were several different design projects. The design that group three chose was an integral transport system for a Martian habitat. An integral transport system means the design had to be one that was attached to the habitat. There were several criteria that the design had to meet. Group three performed an in depth study of the Martian environment and looked at several different design ideas. The concept group three developed involved the use of kinematic linkages and the use of Martian gravity to move the habitat. The various design concepts, the criteria matrices and all other aspects that helped group three develop their design can be found in their 1993 ME 4182 design report. Now it is Winter quarter 1994 and group three is faced with another problem. The problem is building a working prototype of their Fall design. The limitations this quarter were the parts. The group had to make the prototype work with existing manufactured parts or make the parts themselves in a machine shop. The prototype was scaled down roughly about twelve times smaller than the original design. The following report describes the actions taken by group three to build a working model.

Processing of sputter targets using current activated pressure assisted densification

NASA Astrophysics Data System (ADS)

Chaney, Neil Russell

Thin Film deposition is a process that has been around since the beginning of the twentieth century and has become an integral part of the microfabrication and nanofabrication industries. Sputter deposition is a method of physical vapor deposition (PVD) in which a target is bombarded with ions and atoms are ejected and deposited as a thin film on a substrate. Despite extensive research on the direct process of sputtering thin films from targets to substrates, not much work has been done on studying the effect of processing on the microstructure of a target. In the first part of this work, the development of a PVD chamber is explored along with a few modifications and improvements developed along the way. A multiple process PVD chamber was equipped with three different types of PVD processes: sputtering, evaporation, and electron-beam deposition. In the second part of this work, the effect of processing of sputter targets on deposited films is explored. Multiple targets of Copper and yttria stabilized zirconia were produced using CAPAD. The effect of the processing on the microstructure of the targets was determined. The targets were then sputtered into films to study the effects of the target grain size on their properties. The effect of power and pressure were also measured. Increased power led to increased deposition rates while higher vacuum caused deposition rates to decrease.

Correcting Part-Time Misconceptions. Policy Watch.

ERIC Educational Resources Information Center

Employment Policies Inst., Washington, DC.

Part-time workers are those working fewer than 35 hours per week. Of the 113 million wage and salary workers in the labor force, only 17 percent are classified as part time. Four of five part-time workers choose to work part-time rather than full-time. The 3.8 million involuntary part-time workers constitute only 3.4 percent of the work force.…

Sex-role patterns, paternal rearing attitudes and child development in different social classes.

PubMed

Nettelbladt, P; Uddenberg, N; Englesson, I

1981-07-01

Sex-role patterns, the father's rearing attitude and the child's intellectual and emotional development in different social classes were studied in a randomly selected sample of 58 Swedish unbroken families of a small child. Working class men and women married younger and the women were more often house-wives. Working class men had more often been reared in an "authoritarian" way and more often reared their children in the same way. Upper middle class men had taken a more active part in the care of the child. Working class children scored lower on the intelligence tests, especially the verbal ones and were more often estimated as socially immature.

Experiences of reduced work hours for nurses and assistant nurses at a surgical department: a qualitative study.

PubMed

Gyllensten, Kristina; Andersson, Gunnar; Muller, Helena

2017-01-01

There is a shortage of registered nurses in the European Union (EU), and job dissatisfaction and perceived high work-family conflict have been identified as causes of nursing staff turnover. Reducing work hours is an organisational intervention that could have a positive effect on nurses' and assistant nurses' job satisfaction, work-life balance, and willingness to stay in the job. An orthopaedic surgery department at a large hospital in Sweden introduced reduced work hours for nurses and assistant nurses in order to improve the working situation. The aim of the study was to investigate the experiences of reduced work hours and no lunch breaks among nurses and assistant nurses at an orthopaedic surgery department at a hospital in Sweden, with a particular focus on recovery and psychosocial working environment. A qualitative design was used in the study. Eleven nurses and assistant nurses working at the particular orthopaedic department took part in the study, and semi-structured interviews were used to collect data. The interviews were analysed by interpretative phenomenological analysis. Four main themes were developed in the analysis of the data: A more sustainable working situation, Improved work-life balance, Consequences of being part of a project, and Improved quality of care. Each theme consisted of subthemes. Overall, reduced work hours appeared to have many, mainly positive, effects for the participants in both work and home life.

Applied Mycology Can Contribute to Sustainable Rural Livelihoods: Building upon China's Matsutake Management Initiatives.

PubMed

Brown, Madeline; McLellan, Timothy; Li, Huili; Karunarathna, Samantha C

2018-02-01

Matsutake mushrooms are an important part of rural livelihoods and forest ecosystems across large parts of China, as well as elsewhere in East Asia, Northern Europe and North America. Mushroom harvesters have developed sophisticated understandings of matsutake ecology and production, and are applying this knowledge in various innovative management strategies. At the same time, Chinese government agencies and scientists are promoting matsutake-based livelihoods to support development and conservation goals. We collaborated with matsutake harvesters in one Yunnan community to carry out a systematic experiment on a popular shiro-level management technique: covering matsutake shiros with either plastic or leaf litter. Our experimental results suggest that although leaf litter coverings are superior to plastic coverings, shiros that are left uncovered may produce the highest yields. Complementing our experimental work is a multi-sited household survey of existing matsutake management practices across Yunnan, which shows that a high proportion of harvesters are already engaged in a broad range of potentially beneficial management strategies. Though both findings highlight limitations of previous initiatives led by government and research actors in China, this existing body of work is an important foundation and opportunity for developing applied mycology in the region. In and beyond China, working with communities to develop site-specific management strategies through rigorous and participatory scientific inquiry can provide salient benefits for both scientists and resource users.

Applied Mycology Can Contribute to Sustainable Rural Livelihoods: Building upon China's Matsutake Management Initiatives

NASA Astrophysics Data System (ADS)

Brown, Madeline; McLellan, Timothy; Li, Huili; Karunarathna, Samantha C.

2018-02-01

Matsutake mushrooms are an important part of rural livelihoods and forest ecosystems across large parts of China, as well as elsewhere in East Asia, Northern Europe and North America. Mushroom harvesters have developed sophisticated understandings of matsutake ecology and production, and are applying this knowledge in various innovative management strategies. At the same time, Chinese government agencies and scientists are promoting matsutake-based livelihoods to support development and conservation goals. We collaborated with matsutake harvesters in one Yunnan community to carry out a systematic experiment on a popular shiro-level management technique: covering matsutake shiros with either plastic or leaf litter. Our experimental results suggest that although leaf litter coverings are superior to plastic coverings, shiros that are left uncovered may produce the highest yields. Complementing our experimental work is a multi-sited household survey of existing matsutake management practices across Yunnan, which shows that a high proportion of harvesters are already engaged in a broad range of potentially beneficial management strategies. Though both findings highlight limitations of previous initiatives led by government and research actors in China, this existing body of work is an important foundation and opportunity for developing applied mycology in the region. In and beyond China, working with communities to develop site-specific management strategies through rigorous and participatory scientific inquiry can provide salient benefits for both scientists and resource users.

Wood tie track resistance characterization and correlations study

DOT National Transportation Integrated Search

1995-01-01

The work presented here is part of a major program to evaluate lateral buckling of continuous welded rail (CWR) tracks. The program to develop the technical information to support safety guidelines and specifications for track buckling prevention is ...

On-line high-speed rail defect detection : part II.

DOT National Transportation Integrated Search

2012-03-01

The objectives of this project were (1) to improve the defect detection reliability and (2) to improve the inspection speed of conventional rail defect detection methods. The prototype developed in this work uses noncontact transducers, ultrasonic gu...

Understanding the "How" of Quality Improvement: Lessons from the Rhode Island Program Quality Intervention

ERIC Educational Resources Information Center

Devaney, Elizabeth; Smith, Charles; Wong, Kenneth

2012-01-01

Over the past 10 years, afterschool and youth development programming has moved from providing childcare for working parents to being an integral component of the learning day, supporting the academic, social, and emotional development of young people. An important part of that transition has been a growing emphasis on improving program quality.…

"Talking Tools": Sloyd Processes Become Multimodal Stories with Smartphone Documentation

ERIC Educational Resources Information Center

Wiklund-Engblom, Annika; Hiltunen, Kasper; Hartvik, Juha; Porko-Hudd, Mia; Johansson, Marléne

2014-01-01

The study presented is part of a work-in-progress project of developing a mobile application for smartphones, Talking Tools (TT). The first context TT is developed for and tested in is sloyd education [Swedish: slöjd], a compulsory subject taught in Finnish schools. In sloyd learners design and manufacture unique artifacts in various materials…

Mongolia Report No. 361.

DTIC Science & Technology

1983-04-29

Publications Research Service, 1000 North Glebe Road, Arlington, Virginia 22201. JPRS 83366 29 April 1983 Mongolia Report No. 361 FBIS FOREIGN...Installation Data WORLDWIDE Telecommunications Policy, Research and Development Nuclear Development and Proliferation Environmental Quality Epidemiology...understanding and the reinforcement of the peace. In particular, our country took active part in the work of a conference that was recently held in Mexico

Development of human factors guidelines for advanced traveler information systems and commercial vehicle operations : identification of the strengths and weaknesses of alternative information display formats

DOT National Transportation Integrated Search

1998-10-01

This report is one of a series produced as part of a contract designed to develop precise, detailed, human factors design guidelines for Advanced Traveler Information Systems (ATIS) and Commercial Vehicle Operations (CVO). The goals of the work cover...

Image analysis library software development

NASA Technical Reports Server (NTRS)

Guseman, L. F., Jr.; Bryant, J.

1977-01-01

The Image Analysis Library consists of a collection of general purpose mathematical/statistical routines and special purpose data analysis/pattern recognition routines basic to the development of image analysis techniques for support of current and future Earth Resources Programs. Work was done to provide a collection of computer routines and associated documentation which form a part of the Image Analysis Library.

Pathways to Personal Growth. Developing a Sense of Worth and Competence: A Holistic Education Approach.

ERIC Educational Resources Information Center

Witmer, J. Melvin

This book is intended to motivate persons working in the human and social service occupations toward fuller personal development as well as to improve professional competence. The first part discusses the process of becoming a more fully functioning person. Human potential, barriers to personal growth, self-fulfillment, and seeking pathways to…

Food Service Worker. Instructional Modules for Food Management, Production and Services. Modules 1-17. Competency Based Curriculum.

ERIC Educational Resources Information Center

Tennessee Univ., Knoxville. Dept. of Vocational-Technical Education.

These 17 teacher modules are part of a curriculum dealing with food management, production, and services that was developed for use in secondary and postsecondary vocational programs in Tennessee. Covered in the individual modules are food service careers, math skills, reading and converting recipes, work simplification, self-development,…

Bringing a Reading Passage to Life: A Creative Comprehension Activity.

ERIC Educational Resources Information Center

Montone, Christopher L.; Short, Deborah J.

A creative reading comprehension activity developed for multi-grade (6-8) English-as-a-Second-Language (ESL) social studies classes is described. The activity was developed as part of a project integrating language and culture in social studies instruction. Researchers worked with an ESL teacher and a social studies teacher to create a series of…

An English Teacher's Developing Self-Efficacy Beliefs in Using Groupwork

ERIC Educational Resources Information Center

Wyatt, Mark

2010-01-01

In this article, I explore how an English teacher's self-efficacy beliefs in using groupwork developed, specifically with regard to his work with young learners, while he was engaged part-time on an in-service BA TESOL programme in the Middle East. Using qualitative case study methodology, I uncover various aspects of his self-efficacy growth,…

A Part, Not Apart: A Systematic Approach to Integrated Recreation and Leisure for Developmentally Disabled Adults.

ERIC Educational Resources Information Center

Congdon, David M.; And Others

This program manual was developed by the Grant-Blackford Development Center in order to help other professionals and organizations working with developmentally disabled persons to improve their recreation and leisure programs. The manual's philosophy is to structure recreation programs for fun, not just for skill teaching: stressing abilities, not…

ESIS ions injection, holding and extraction control system

NASA Astrophysics Data System (ADS)

Donets, E. D.; Donets, E. E.; Donets, D. E.; Lyuosev, D. A.; Ponkin, D. O.; Ramsdorf, A. Yu.; Boytsov, A. Yu.; Salnikov, V. V.; Shirikov, I. V.

2018-04-01

Electron string ion source (ESIS) KRION-6T is one of the main parts of the NICA injection complex [1]. During the work on creation of a new ion source for the NICA/MPD project the new ion motion control system was developed, produced and successfully put into operation. Modules development process and operation results are described.

Evaluating an Online E-Module for Portuguese Primary Teachers: Trainees' Perceptions

ERIC Educational Resources Information Center

Pombo, L.; Smith, M.; Abelha, M.; Caixinha, H.; Costa, N.

2012-01-01

The work reported in this article is part of a wider project that aims to develop and implement a web-based, pan-European, in-service professional development platform for teachers to enhance their role in promoting education through science. This article aims to evaluate the implementation of the e-module on Assessment of Children's Learning in…

Development of an Instrument to Measure Students' Attitudes towards Piano Practice

ERIC Educational Resources Information Center

Umuzdas, Mehmet Serkan

2015-01-01

Practicing the piano is a systematic part of the instrument-learning process. It contains all development practices from the analysis of the work to the improvement of performance. Students usually practice the piano as a preparation for performing in courses, exams, or on stage and they do it individually. The mentality which emerges during the…

Words Work: Activities for Developing Vocabulary, Style, and Critical Thinking.

ERIC Educational Resources Information Center

Carnicelli, Thomas A.

This book offers integrated activities in which students explore words and, at the same time, develop their language arts and thinking skills. The book states that this way teachers can pay more attention to word study, without sacrificing other parts of the English curriculum and without resorting to word lists and memorization. In the first…

Evidence-Based Practices in Interventions for Children and Youth with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Odom, Samuel L.; Collet-Klingenberg, Lana; Rogers, Sally J.; Hatton, Deborah D.

2010-01-01

Evidence-based practices (EBPs) are the basis on which teachers and other service providers are required to design educational programs for learners with autism spectrum disorders (ASD). As part of their work with the National Professional Development Center (NPDC) on ASD, researchers developed a process for reviewing the research literature and…

How to Measure the Efficacy of VET Workplace Learning: The FET-WL Model

ERIC Educational Resources Information Center

Pineda-Herrero, Pilar; Quesada-Pallarès, Carla; Espona-Barcons, Berta; Mas-Torelló, Óscar

2015-01-01

Purpose: Workplace learning (WL) is a key part of vocational education and training (VET) because it allows students to develop their skills in a work environment, and provides important information about how well VET studies prepare skilled workers. Therefore, the purpose of this paper is to develop and validate an instrument to evaluate WL…

Real Income, Poverty, Resources. Rural Development, Poverty, and Natural Resources Working Paper Series, Part III.

ERIC Educational Resources Information Center

Hoch, Irving; And Others

This paper reports progress on the development of improved measures of income and poverty by accounting for differences in living costs between regions, and on the tracing of relationships between natural resources and income; a reviewer's comments conclude the contents of this workshop collection. The overview describes how a measure of income…

A Systematic Review of Developing Team Competencies in Information Systems Education

ERIC Educational Resources Information Center

Figl, Kathrin

2010-01-01

The ability to work effectively in teams has been a key competence for information systems engineers for a long time. Gradually, more attention is being paid to developing this generic competence as part of academic curricula, resulting in two questions: how to best promote team competencies and how to implement team projects successfully. These…

Teaching Sustainable Development Concepts in the Laboratory: A Solid-Liquid Extraction Experiment

ERIC Educational Resources Information Center

Parajo, Juan Carlos; Dominguez, Herminia; Santos, Valentin; Alonso, Jose Luis; Garrote, Gil

2008-01-01

One of the principles of sustainable development is to replace chemicals traditionally derived from oil with alternative, renewable materials. For example, phenol and phenol derivatives currently used in the manufacture of wood adhesives can be replaced (at least in part) by biopolymers extracted from biomass. In this work, pine bark (a renewable…

The influence of data curation on QSAR Modeling - examining issues of quality versus quantity of data (American Chemical Society)

EPA Science Inventory

This presentation will examine the impact of data quality on the construction of QSAR models being developed within the EPA‘s National Center for Computational Toxicology. We have developed a public-facing platform to provide access to predictive models. As part of the work we ha...

Cooperative Education in a New Era: Understanding and Strengthening the Links between College and the Workplace.

ERIC Educational Resources Information Center

Ryder, Kenneth G.; Wilson, James W.

A description of contemporary cooperative education shows how programs, policies, and practices have developed and changed to fit today's educational and work environment. Specific benefits for students, academic institutions, and employers are examined. Following a foreword by Ralph W. Tyler, four chapters in part one (the development of…

Developing an Item Bank for Use in Testing in Africa: Theory and Methodology

ERIC Educational Resources Information Center

Furtuna, Daniela

2014-01-01

The author describes the steps taken by a research team, of which she was part, to develop a specific methodology for assessing student attainment in primary school, working with the Programme for the Analysis of Education Systems (PASEC) of the Conference of Ministers of Education of French-speaking Countries (CONFEMEN). This methodology provides…

[Job-sharing in postgraduate medical training: not automatically a nice duet].

PubMed

Levi, M

2004-02-14

Part-time work is an increasingly common phenomenon amongst medical professionals. Therefore many postgraduate training programmes for resident physicians also offer the opportunity of part-time work, which is usually in the form of an 80% full-time equivalent post. A new initiative has created the possibility of job-sharing, in which each of the participants fulfills 50% of one training position. Although the experience of the participants is mainly positive, it is unclear how this development will impact the quality of patient care and how it will affect the fulfillment of the training objectives. A more systematic evaluation of job-sharing in postgraduate medical training programmes is required to clarify these points.

Summary of laser speckle photogrammetry for HOST

NASA Technical Reports Server (NTRS)

Pollack, Frank G.

1986-01-01

High temperature static strain measurement capability is important for the success of the HOST program. As part of the NASA Lewis effort to develop the technology for improved hot-section durability, the HOST instrumentation program has, as a major goal, the development of methods for measuring strain at high temperature. Development work includes both improvements in resistance strain-gauge technology and, as an alternative approach, the development of optical techniques for high temperature strain measurement.

Statistical analysis and yield management in LED design through TCAD device simulation

NASA Astrophysics Data System (ADS)

Létay, Gergö; Ng, Wei-Choon; Schneider, Lutz; Bregy, Adrian; Pfeiffer, Michael

2007-02-01

This paper illustrates how technology computer-aided design (TCAD), which nowadays is an essential part of CMOS technology, can be applied to LED development and manufacturing. In the first part, the essential electrical and optical models inherent to LED modeling are reviewed. The second part of the work describes a methodology to improve the efficiency of the simulation procedure by using the concept of process compact models (PCMs). The last part demonstrates the capabilities of PCMs using an example of a blue InGaN LED. In particular, a parameter screening is performed to find the most important parameters, an optimization task incorporating the robustness of the design is carried out, and finally the impact of manufacturing tolerances on yield is investigated. It is indicated how the concept of PCMs can contribute to an efficient design for manufacturing DFM-aware development.

Creating a culture to support patient safety. The contribution of a multidisciplinary team development programme to collaborative working.

PubMed

Benson, Anne

2010-01-01

Effective teamwork is crucial for ensuring the provision of safe high quality care. Teams whose members collaborate through questioning, reflecting on and reviewing their work, offering each other feedback and where reporting is encouraged are more likely to promote a safe environment of care. This paper describes a multidisciplinary development programme intended to increase team effectiveness. The teams that took part developed their ability to work collaboratively together with levels of open dialogue, critical reflection and direct feedback increasing. The paper goes on to discuss aspects of the programme which were helpful in enabling these positive changes and concludes with a number of recommendations for those commissioning and facilitating team development initiatives. These include: the need for people from different disciplines and different levels within the hierarchy to spend time reviewing their work together, the need to explicitly address issues of power and authority, the usefulness taking an action orientated approach and requiring participants to work on real issues together, the importance of providing sufficient time and resource to support people to work with the challenges associated with implementing change and addressing team dynamics, The importance of skilled facilitation.

Titanium Aluminide Casting Technology Development

NASA Astrophysics Data System (ADS)

Bünck, Matthias; Stoyanov, Todor; Schievenbusch, Jan; Michels, Heiner; Gußfeld, Alexander

2017-12-01

Titanium aluminide alloys have been successfully introduced into civil aircraft engine technology in recent years, and a significant order volume increase is expected in the near future. Due to its beneficial buy-to-fly ratio, investment casting bears the highest potential for cost reduction of all competing production technologies for TiAl-LPTB. However, highest mechanical properties can be achieved by TiAl forging. In view of this, Access e.V. has developed technologies for the production of TiAl investment cast parts and TiAl die cast billets for forging purposes. While these parts meet the highest requirements, establishing series production and further optimizing resource and economic efficiency are present challenges. In order to meet these goals, Access has recently been certified according to aircraft standards, aiming at qualifying parts for production on technology readiness level 6. The present work gives an overview of the phases of development and certification.

The work of the Child Accident Prevention Trust.

PubMed Central

Jackson, R H; Cooper, S; Hayes, H R

1988-01-01

In 1983 an article was published in this Journal describing the work of the Child Accident Prevention Trust. Since that time many developments have taken place in the field of child accident prevention. There has been an increased recognition of the role of accidents and injuries in child health and the importance of accident prevention at an international, national, and local level. This has, in part, been a result of work undertaken by the Child Accident Prevention Trust. Much remains to be done, however, and doctors and other health workers involved with children must recognise the part that they can play in reducing this epidemic. Mortality and morbidity from accidents is the largest single problem in the health of children after the first year of life. The aim of this article is to stimulate interest in the problem of accidents in childhood especially among community paediatricians and clinical medical officers. Hospital doctors and general practitioners also have a particular part to play in drawing the attention of appropriate authorities to factors which have led to accidents that may have been preventable (see Annotation in this issue). PMID:3355217

Final Report: Correctness Tools for Petascale Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mellor-Crummey, John

2014-10-27

In the course of developing parallel programs for leadership computing systems, subtle programming errors often arise that are extremely difficult to diagnose without tools. To meet this challenge, University of Maryland, the University of Wisconsin—Madison, and Rice University worked to develop lightweight tools to help code developers pinpoint a variety of program correctness errors that plague parallel scientific codes. The aim of this project was to develop software tools that help diagnose program errors including memory leaks, memory access errors, round-off errors, and data races. Research at Rice University focused on developing algorithms and data structures to support efficient monitoringmore » of multithreaded programs for memory access errors and data races. This is a final report about research and development work at Rice University as part of this project.« less

Importance of Eugenio Beltrami's hydroelectrodynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Filipponi, G.

1985-07-01

As part of a continuing project of bringing the works of Bernhard Riemann and his collaborators directly before the scientific community, we are happy to present translations of two papers by Eugenio Beltrami that were key in the development of hydrodynamics. We have also translated a short portion of Beltrami's attack upon the electrodynamics of James Clerk Maxwell. The first paper develops the work of Hermann Helmholtz (translated in IJFE (Helmholtz 1978)) into a generative treatment of vortices. As the note by Dan Wells in this issue illustrates in connection with his own work, Beltrami's method has proven critical tomore » the treatment of the development of vortices in plasmas, providing a crucial tool for studying what was otherwise dismissed as turbulence. In his introduction to the translations, Dr. Giuseppe Filipponi develops the connection between the discoveries of Beltrami and the Italian tradition of research in hydrodynamics begun by Leonardo da Vinci.« less

Challenges for academic accreditation: the UK experience

NASA Astrophysics Data System (ADS)

Shearman, Richard; Seddon, Deborah

2010-08-01

Several factors (government policy, demographic trends, employer pressure) are leading to new forms of degree programmes in UK universities. The government is strongly encouraging engagement between universities and employers. Work-based learning is increasingly found in first and second cycle programmes, along with modules designed by employers and increasing use of distance learning. Engineering faculties are playing a leading part in these developments, and the Engineering Council, the engineering professional bodies and some universities are collaborating to develop work-based learning programmes as a pathway to professional qualification. While potentially beneficial to the engineering profession, these developments pose a challenge to traditional approaches to programme accreditation. This paper explores how this system deals with these challenges and highlights the issues that will have to be addressed to ensure that the system can cope effectively with change, especially the development of individually tailored, work-based second cycle programmes, while maintaining appropriate standards and international confidence.

Learning from Inconsistency

NASA Technical Reports Server (NTRS)

Easterbrook, Steve

1996-01-01

This position paper argues that inconsistencies that occur during the development of a software specification offer an excellent way of learning more about the development process. We base this argument on our work on inconsistency management. Much attention has been devoted recently to the need to allow inconsistencies to occur during software development, to facilitate flexible development strategies, especially for collaborative work. Recent work has concentrated on reasoning in the presence of inconsistency, tracing inconsistencies with 'pollution markers' and supporting resolution. We argue here that one of the most important aspects of inconsistency is the learning opportunity it provides. We are therefore concerned with how to capture this learning outcome so that its significance is not lost. We present a small example of how apprentice software engineers learn from their mistakes, and outline how an inconsistency management tool could support this learning. We then argue that the approach can be used more generally as part of continuous process improvement.

Part of the job: the role of physical work conditions in the nurse turnover process.

PubMed

Vardaman, James M; Cornell, Paul T; Allen, David G; Gondo, Maria B; Muslin, Ivan S; Mobley, Robin N; Brock, Meagan E; Sigmon, Tracy L

2014-01-01

Retention of nursing staff remains an important issue for health care managers. Turnover research has focused primarily on motivational and social factors as keys to retention, whereas the role of the physical work conditions has received considerably less attention. However, work design theory suggests that physical work conditions may be an important factor in fostering retention among nursing staff. The aim of this study was to integrate work design theory with turnover process models to explore the influence of perceptions of physical work conditions on the development of turnover intentions among nursing staff. Drawing on two samples of registered nurses working in cancer units in metropolitan hospitals in the southeastern United States, this study explores the impact of perceptions of physical work conditions on turnover intentions using ordinary least squares regression. Hypotheses are tested in Study 1 and replicated in Study 2. A measure of perceptions of physical work conditions is also developed and validated using exploratory (Study 1) and confirmatory (Study 2) factor analyses. Perceptions of physical work conditions explain variance in turnover intentions above than that explained by motivational and social factors. Specifically, employee perceptions of noisy work conditions are found to significantly increase turnover intentions, whereas perceptions that work conditions facilitate tasks were found to significantly reduce turnover intentions. Perceptions of temperature and health hazard did not show significant effects. Results suggest that health care managers and scholars should re-examine the role of physical work conditions in the turnover process. Investments in upgrades that facilitate tasks may foster retention better than investments that simply improve employee comfort. Negative perceptions of work conditions may have no impact if they are considered a normal "part of the job," although negative perceptions of conditions that are viewed as under the organization's control may be important in creating a desire to leave.

Work-related fatigue and recovery: the contribution of age, domestic responsibilities and shiftwork.

PubMed

Winwood, Peter C; Winefield, Antony H; Lushington, Kurt

2006-11-01

This paper reports a study of the relationship between age, domestic responsibilities (being partnered and having dependents), recovery from shiftwork-related fatigue and the evolution of maladaptive health outcomes among full-time working female nurses. Several studies have suggested that full-time working women with family responsibilities are at greater risk of developing work-related fatigue problems than single women without these responsibilities. A questionnaire was distributed in 2004 to 2400 nurses at two hospitals in Australia, and 1280 responses were obtained (response rate 54%). The data from a purposive sample of 846 full-time working nurses are reported here. Domestic responsibilities were not related to differences in fatigue and recovery. Our results suggested that for full-time shiftworking nurses, being part of a family structure, may actually be protective against the development of maladaptive fatigue. The most important factor determining maladaptive fatigue outcome was shift pattern worked, particularly rotation including night duty. The effect of age was equivocal. The youngest age group reported the highest fatigue and poorest recovery compared to the oldest group, who reported the best characteristics. However, this latter group may represent a particularly well-adapted 'survivor cohort'. The relationship between age and fatigue was partly confounded by older, experienced, nurses with greater job responsibilities, working fewer multiple shifts including night duty. In general, increasing age was not associated with poorer recovery or higher maladaptive fatigue. Unpredictable internal shift rotations, including night duty, which are traditional and typical in nursing, are inimical to maintaining nurses' health. More creative approaches to rostering for nurses working multiple shifts are a necessary step towards reducing wastage from the profession due to chronic work-related fatigue. Younger nurses in particular, may need more support than is currently recognized if they are to be retained within the profession.

Experiencias en Lenguaje Para su Nino ed Edad Pre-escolar. Parte I: Actividades Para la Casa. (Language Experiences for Your Preschooler. Part I: Activities at Home.)

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Continuing Education Curriculum Development.

The purpose of this manuscript (written in Spanish) is to encourage the development of communication skills of preschool children by introducing their parents to a number of learning activities suitable for home use. It is written to be used by an instructor who is working with preschool parents. The activities, which are designed to be…

Comprehensive Employment and Training Act of 1973. Job Corps Health Program. A Working Document for Standing Orders. Part 1. Standing Orders for Health Personnel.

ERIC Educational Resources Information Center

Employment and Training Administration (DOL), Washington, DC.

Developed as the first of a two-part supplement to Technical Supplement Q for Standing Orders (TS-Q), this handbook of standing orders was designed to help health personnel at Comprehensive Employment and Training Act (CETA) Job Corps health centers meet the federal requirement that each center have a set of written standing orders on how to…

Microstructure Engineering in Hot Strip Mills, Part 1 of 2: Integrated mathematical Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.K. Brimacombe; I.V. Samaraseker; E.B. Hawbolt

1998-09-30

This report describes the work of developing an integrated model used to predict the thermal history, deformation, roll forces, microstructural evaluation and mechanical properties of steel strip in a hot-strip mill. This achievement results from a join research effort that is part of the American Iron and Steel Institute's (AISI) Advanced Process Control Program, a collaboration between the U.S. DOE and fifteen North American steel makers.

Social Work Education. Report of Master Plan Committee S.

ERIC Educational Resources Information Center

Illinois State Board of Higher Education, Springfield. Master Plan Committee.

This report of the Master Plan Committee on Social Work Education is part of Phase III of the Illinois Statewide Master Plan for Higher Education dealing with graduate and professional education. Part I presents an overview. Part II gives a brief description of social work and a statement of the problem. In Part III the social work manpower in the…

Space Research Institute (IKI) Exhibition as an Educational Project

NASA Astrophysics Data System (ADS)

Sadovski, Andrei; Antonenko, Elena

2016-07-01

The Exhibition "Space Science: Part and Future" in Space Research Institute (IKI) was opened in 2007 in commemoration of the 50th anniversary of the first man-made satellite launch. It covers the latest and the most important findings in space research, shows instruments which are used in space exploration, and presents past, current, and future Russian science missions. Prototypes of space instruments developed by Russian specialists and mockups of spacecraft and spaceships flown to space are displayed, together with information posters, describing space missions, their purposes and results. The Exhibition takes a great part in school space education. Its stuff actively works with schoolchildren, undergraduate students and also makes a great contribution in popularization of space researches. Moreover the possibility to learn about scientific space researches first-hand is priceless. We describe the main parts of the Exhibition and forms of it work and also describe the collaboration with other museums and educational organizations.

The legal system. Part 2: it's not just for lawyers.

PubMed

Boylan-Kemp, Jo

This is the second part of the two-part article intended to provide an introduction to the foundation elements of the English legal system. The 'English legal system' is a rather generic term that is often used to refer to the different sources of law and the court system in which the law is practised. Students of law will study the English legal system as a specific topic, but it is as equally important for those who work within a profession that is regulated by the law (as nursing is) to also develop an understanding of the legal boundaries within which such a profession works. This particular article follows on from our earlier consideration of the cornerstones of the legal system and looks at the different sources of law that can be found within the English legal system; focusing particularly on the concepts of common law, equity, and the impact of European sources on domestic law.

Applications for Gradient Metal Alloys Fabricated Using Additive Manufacturing

NASA Technical Reports Server (NTRS)

Hofmann, Douglas C.; Borgonia, John Paul C.; Dillon, Robert P.; Suh, Eric J.; Mulder, jerry L.; Gardner, Paul B.

2013-01-01

Recently, additive manufacturing (AM) techniques have been developed that may shift the paradigm of traditional metal production by allowing complex net-shaped hardware to be built up layer-by-layer, rather than being machined from a billet. The AM process is ubiquitous with polymers due to their low melting temperatures, fast curing, and controllable viscosity, and 3D printers are widely available as commercial or consumer products. 3D printing with metals is inherently more complicated than with polymers due to their higher melting temperatures and reactivity with air, particularly when heated or molten. The process generally requires a high-power laser or other focused heat source, like an electron beam, for precise melting and deposition. Several promising metal AM techniques have been developed, including laser deposition (also called laser engineered net shaping or LENS® and laser deposition technology (LDT)), direct metal laser sintering (DMLS), and electron beam free-form (EBF). These machines typically use powders or wire feedstock that are melted and deposited using a laser or electron beam. Complex net-shape parts have been widely demonstrated using these (and other) AM techniques and the process appears to be a promising alternative to machining in some cases. Rather than simply competing with traditional machining for cost and time savings, the true advantage of AM involves the fabrication of hardware that cannot be produced using other techniques. This could include parts with "blind" features (like foams or trusses), parts that are difficult to machine conventionally, or parts made from materials that do not exist in bulk forms. In this work, the inventors identify that several AM techniques can be used to develop metal parts that change composition from one location in the part to another, allowing for complete control over the mechanical or physical properties. This changes the paradigm for conventional metal fabrication, which relies on an assortment of "post-processing" methods to locally alter properties (such as coating, heat treating, work hardening, shot peening, etching, anodizing, among others). Building the final part in an additive process allows for the development of an entirely new class of metals, so-called "functionally graded metals" or "gradient alloys." By carefully blending feedstock materials with different properties in an AM process, hardware can be developed with properties that cannot be obtained using other techniques but with the added benefit of the net-shaped fabrication that AM allows.

Development of 6-DOF painting robot control system

NASA Astrophysics Data System (ADS)

Huang, Junbiao; Liu, Jianqun; Gao, Weiqiang

2017-01-01

With the development of society, the spraying technology of manufacturing industry in China has changed from the manual operation to the 6-DOF (Degree Of Freedom)robot automatic spraying. Spraying painting robot can not only complete the work which does harm to human being, but also improve the production efficiency and save labor costs. Control system is the most critical part of the 6-DOF robots, however, there is still a lack of relevant technology research in China. It is very necessary to study a kind of control system of 6-DOF spraying painting robots which is easy to operation, and has high efficiency and stable performance. With Googol controller platform, this paper develops programs based on Windows CE embedded systems to control the robot to finish the painting work. Software development is the core of the robot control system, including the direct teaching module, playback module, motion control module, setting module, man-machine interface, alarm module, log module, etc. All the development work of the entire software system has been completed, and it has been verified that the entire software works steady and efficient.

Occupational Injuries in a Commune in Rural Vietnam Transitioning From Agriculture to New Industries

PubMed Central

Leamon, Tom B.; Willetts, Joanna L.; Binh, Ta Thi Tuyet; Diep, Nguyen Bich; Wegman, David H.; Kriebel, David

2011-01-01

Objectives. We explored the impact on work-related injuries of workers splitting time between industry and agriculture, a common situation in developing countries. Methods. In 2005, we administered a cross-sectional survey to 2615 households of Xuan Tien, a developing rural community of Vietnam, regarding self-reported injuries and hours worked for 1 year. We defined groups as working in industry, agriculture, or a mix of both. Results. Overlapping employment (part time in agriculture and up to full time in industry) increased the risk of injury in both agricultural and industrial work. This pattern held across all work groups defined by the relative amount of time worked in agriculture. Those working fewer than 500 hours annually in agriculture had an agricultural injury rate (872 per 1000 full-time equivalents) that was more than 4 times higher than the average rate overall (203 per 1000) and the rate for workers employed only in industry (178 per 1000). Conclusions. Working in agriculture for short durations while working in industry increased the risk of injury substantially in both types of work. PMID:21490336

Occupational injuries in a commune in rural Vietnam transitioning from agriculture to new industries.

PubMed

Marucci-Wellman, Helen; Leamon, Tom B; Willetts, Joanna L; Binh, Ta Thi Tuyet; Diep, Nguyen Bich; Wegman, David H; Kriebel, David

2011-05-01

We explored the impact on work-related injuries of workers splitting time between industry and agriculture, a common situation in developing countries. In 2005, we administered a cross-sectional survey to 2615 households of Xuan Tien, a developing rural community of Vietnam, regarding self-reported injuries and hours worked for 1 year. We defined groups as working in industry, agriculture, or a mix of both. Overlapping employment (part time in agriculture and up to full time in industry) increased the risk of injury in both agricultural and industrial work. This pattern held across all work groups defined by the relative amount of time worked in agriculture. Those working fewer than 500 hours annually in agriculture had an agricultural injury rate (872 per 1000 full-time equivalents) that was more than 4 times higher than the average rate overall (203 per 1000) and the rate for workers employed only in industry (178 per 1000). Working in agriculture for short durations while working in industry increased the risk of injury substantially in both types of work.

Flexible Work Schedules. ERIC Digest.

ERIC Educational Resources Information Center

Kerka, Sandra

Flexible work schedules are one response to changes in the composition of the work force, new life-styles, and changes in work attitudes. Types of alternative work schedules are part-time and temporary employment, job sharing, and flextime. Part-time workers are a diverse group--women, the very young, and older near-retirees. Although part-time…

Developing Professional Learning for Staff Working with Children with Speech, Language and Communication Needs Combined with Moderate-Severe Learning Difficulties

ERIC Educational Resources Information Center

Anderson, Carolyn

2011-01-01

This article presents research undertaken as part of a PhD by Carolyn Anderson who is a senior lecturer on the BSc (Hons) in Speech and Language Pathology at the University of Strathclyde. The study explores the professional learning experiences of 49 teachers working in eight schools and units for children with additional support needs in…

Empirical simulations of materials

NASA Astrophysics Data System (ADS)

Jogireddy, Vasantha

2011-12-01

Molecular dynamics is a specialized discipline of molecular modelling and computer techniques. In this work, first we presented simulation results from a study carried out on silicon nanowires. In the second part of the work, we presented an electrostatic screened coulomb potential developed for studying metal alloys and metal oxides. In particular, we have studied aluminum-copper alloys, aluminum oxides and copper oxides. Parameter optimization for the potential is done using multiobjective optimization algorithms.

Project CHOICE: #170. A Career Education Unit for Grades 1 and 2. We Work with Animals. (Agriculture and Ecological Studies Career Cluster).

ERIC Educational Resources Information Center

Kern County Superintendent of Schools, Bakersfield, CA.

This teaching unit on working with animals is part of the Agriculture and Biological Studies Career Cluster included in a series of career guidebooks developed by Project CHOICE (Children Have Options in Career Education). The units are designed to provide the classroom teacher with a source of career-related activities linking first and second…

Continuity and Respect for Diversity: Strengthening Early Transitions in Peru. Working Papers in Early Childhood Development, No. 56. Studies in Early Childhood Transitions

ERIC Educational Resources Information Center

Ames, Patricia; Rojas, Vanessa; Portugal, Tamia

2010-01-01

This working paper is part of a series on early transitions from "Young Lives," a 15-year longitudinal study of childhood poverty in Ethiopia, India, Peru and Vietnam. It explores the diverse experiences of 28 children from four contrasting communities in Peru as they start school. These detailed case studies highlight common problems:…

The Work of the Civilian Conservation Corps: Pioneering Conservation in Louisiana

Treesearch

James P. Barnett; Anna C. Burns

2016-01-01

The Civilian Conservation Corps (CCC) was a public work relief program that operated from 1933 to 1942 in the United States for unemployed, unmarried men from relief families, ages 18-25. A part of the New Deal of U.S. President Franklin D. Roosevelt, it provided unskilled manual labor jobs related to the conservation and development of natural resources on the Nation’...

Pushing for Part Time.

ERIC Educational Resources Information Center

Geber, Beverly

1987-01-01

More employees are choosing to work part time. Although this trend started because of working women, some men are choosing part-time positions. Part-time employees forfeit salary and promotion potential, yet most feel the trade is fair and that they are more productive during their working hours. (CH)

Job Sharing for Women Pharmacists in Academia

PubMed Central

Finks, Shannon W.

2009-01-01

The pharmacist shortage, increasing numbers of female pharmacy graduates, more pharmacy schools requiring faculty members, and a lower percentage of female faculty in academia are reasons to develop unique arrangements for female academic pharmacists who wish to work part-time. Job sharing is an example of a flexible alternative work arrangement that can be successful for academic pharmacists who wish to continue in a part-time capacity. Such partnerships have worked for other professionals but have not been widely adopted in pharmacy academia. Job sharing can benefit the employer through retention of experienced employees who collectively offer a wider range of skills than a single employee. Benefits to the employee include balanced work and family lives with the ability to maintain their knowledge and skills by remaining in the workforce. We discuss the additional benefits of job-sharing as well as our experience in a non-tenure track job-sharing position at the University of Tennessee College of Pharmacy. PMID:19960092

Learning That Lasts: Integrating Learning, Development, and Performance in College and Beyond. The Jossey-Bass Higher and Adult Education Series.

ERIC Educational Resources Information Center

Mentkowski, Marcia

"Learning That Lasts" is defined as an integration of learning, development, and performance. This four-part book attempts to clarify how this kind of learning is understood by the learner, how it contributes to the development of the person, and how it is realized through effective performance in work, personal, and civic life. The chapters are:…

The Determinants of School Achievement in Developing Countries: The Educational Production Function. International Bank for Reconstruction and Development Staff Working Paper No. 201.

ERIC Educational Resources Information Center

Alexander, Leigh; Simmons, John

A number of studies are reviewed in an attempt to identify those schooling inputs that affect schooling outcomes, specifically cognitive achievement of students, in developing countries. Part 1 of the paper outlines the nature of the major tool of analysis, the educational production function (EPF), and the problems associated with its use as a…

"Analysis of Leadership Styles Developed by Teachers and Administrators in Technical-Technological Programs: The Case of The Cooperative University of Colombia"

ERIC Educational Resources Information Center

Cuadros, María del Pilar Jaime; Cáceres Reche, María Pilar; Lucena, Francisco Javier Hinojo

2018-01-01

This work is part of a wider research effort in the field of leadership and organizational development, coordinated by the University of Granada and the A.R.E.A Research Group (Analysis of Educational Reality in Andaluz), HUM/672. It was developed in the Cooperative University of Colombia, a country where technical and technological programmes…

Professional Values: Key to Professional Development.

ERIC Educational Resources Information Center

Weis, Darlene; Schank, Mary Jane

2002-01-01

Affective domain learning, including values formation, is an important part of humanistic nursing education. The American Nurses Association code of ethics articulates professional values. For full embodiment of these values to occur, educators and the profession must work together. (Contains 30 references.) (SK)

Analysis and recommendation of separation requirements for rotorcraft operation at airports and heliports

DOT National Transportation Integrated Search

1986-09-01

The analysis work presented in this report is part of an ongoing effort by the Federal Aviation Administration (FAA) to develop improved rotorcraft separation standards. The subject of this report, Analysis and Recommendation of Separation Requiremen...

Impact of lane closures on roadway capacity, phase 2.

DOT National Transportation Integrated Search

2014-01-01

This project is a follow-up to Florida Department of Transportation (FDOT) research project BD545-61, Impact of : Lane Closures on Roadway Capacity (specifically, Part A: Development of a Two-Lane Work Zone Lane Closure : Analysis Procedure and...

Characteristics of the Roof Behaviors and Mine Pressure Manifestations During the Mining of Steep Coal Seam

NASA Astrophysics Data System (ADS)

Hong-Sheng, Tu; Shi-Hao, Tu; Cun, Zhang; Lei, Zhang; Xiao-Gang, Zhang

2017-12-01

A steep seam similar simulation system was developed based on the geological conditions of a steep coal seam in the Xintie Coal Mine. Basing on similar simulation, together with theoretical analysis and field measurement, an in-depth study was conducted to characterize the fracture and stability of the roof of steep working face and calculate the width of the region backfilled with gangue in the goaf. The results showed that, as mining progressed, the immediate roof of the steep face fell upon the goaf and backfilled its lower part due to gravity. As a result, the roof in the lower part had higher stability than the roof in the upper part of the working face. The deformation and fracture of main roof mainly occurred in the upper part of the working face; the fractured main roof then formed a "voussoir beam" structure in the strata's dip direction, which was subjected to the slip- and deformation-induced instability. The stability analysis indicated that, when the dip angle increased, the rock masses had greater capacity to withstand slip-induced instability but smaller capacity to withstand deformation-induced instability. Finally, the field measurement of the forces exerted on the hydraulic supports proved the characteristics of the roof's behaviors during the mining of a steep seam.

Opening up mental health service delivery to cultural diversity: current situation, development and examples from three northern European countries.

PubMed

Bäärnhielm, Sofie; Jávo, Cecilie; Mösko, Mike-Oliver

2013-01-01

There are inequalities in health among migrants and local populations in Europe. Due to migration, Germany, Norway and Sweden have become ethnic culturally diverse nations. There are barriers to mental health care access for refugees, migrants and minorities, and problems with quality of culturally sensitive care in the three countries. This is despite tax-funded health care systems based on equity in service provision. There is a need to develop culturally sensitive mental health services that respond to the increasing diversity of the populations. In this chapter, we will take a closer look at cultural diversity in the countries in question, discuss challenges and give examples of current work to open up mental health services to cultural diversity. The German example will focus on the movement of Interkulturelle Öffnung (cross-cultural opening of the health care system) and work on creating national guidelines and quality standards. From Norway, the work of the National Centre for Mental Health for the indigenous Sámi population will be presented. The Swedish example will focus on the work carried out by the Transcultural Centre. The latter is a competence centre supporting development of culturally sensitive care as an integrated part of the regional health and mental health care system in Stockholm. Finally, the relevance of mental health care for a culturally diverse population, as a part of the larger social project of building tolerant multicultural societies, will be discussed. Copyright © 2013 S. Karger AG, Basel.

[Mass casualty incidents - current concepts and developments].

PubMed

Savinsky, Godo; Stuhr, Markus; Kappus, Stefan; Trümpler, Stefan; Wenderoth, Stephan; Wohlers, Jan-Hauke; Paschen, Hans-Richard; Kerner, Thoralf

2014-12-01

Medical concepts and strategies are permanently changing. Due to the emergency response in a mass casualty incident everyone who is involved has to work together with different organisations and public authorities, which are not part of the regular emergency medical service. Within the last 25 years throughout the whole country of Germany the role of a "chief emergency physician" has been implemented and in preparation for the FIFA World Cup 2006 mobile treatment units were set up. In 2007, special units of the "Medical Task Force" - funded by the german state - were introduced and have been established by now. They will be a permanent part of regional plannings for mass casualty incidents. This article highlights current concepts and developments in different parts of Germany. © Georg Thieme Verlag Stuttgart · New York.

Establishment of a Bioenergy-Focused Microalgae Strain Collection Using Rapid, High-Throughput Methodologies: Cooperative Research and Development Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pienkos, Philip T.

2013-11-01

This project is part of the overall effort by and among NREL, Colorado State University, University of Colorado, and Colorado School of Mines known as the Colorado Center for Biorefining and Biofuels. This is part of a larger statewide effort provided for in House Bill 06-1322, establishing a Colorado Collaboratory that envisions these four institutions working together as part of the state'senergy plan. This individual project with Colorado School of Mines is the first of many envisioned in this overall effort. The project focuses on development of high throughput procedures aimed at rapidly isolating and purifying novel microalgal strains (specificallymore » green alga and diatoms) from water samples obtained from unique aquatic environments.« less

Prevalence of and Factors Associated with Work-Related Musculoskeletal Symptoms in Nursing Assistants Working in Nursing Homes

PubMed Central

Szeto, Grace; Lai, Godfrey Kin Bun

2018-01-01

The prevalence of work-related musculoskeletal symptoms (WRMSs) in different body parts for nursing assistants (NAs) working in nursing homes is currently unknown. The aim of this study was to determine the extent of WRMSs in nursing assistants and the factors associated with them. Four hundred and forty NAs from 52 nursing homes, recruited by convenience sampling, participated in this cross-sectional study in 2014–2015. A valid and reliable study questionnaire was used to collect data. The results of our study found that 88.4% of NAs reported at least one body part with WRMSs. These NAs reported more symptoms in the shoulders than lower back. Adverse workstyle (OR = 1.04, 95% CI = 1.01–1.08) was the only factor associated with WRMSs after adjustment for potential confounders using multivariable logistic regression. This adverse workstyle could be developed because of physical and psychological work demands. Efforts should be directed at integrating “workstyle intervention” into lifestyle physical activity training to this group of healthcare workers. PMID:29401700

Barriers and enablers to returning to work from long-term sickness absence: Part I-A quantitative perspective.

PubMed

Board, Belinda J; Brown, Jennifer

2011-04-01

Long-term sickness absence (LTSA) in the United Kingdom labor market has become a major health issue in recent years. In contrast to short-term sickness absence, rates for LTSA have been on the increase. This paper, part 1 of a two-part paper, identifies individual domain barriers to returning to work (RTW) from LTSA across the work disability timeline in the UK labor market. This is a retrospective cohort study of 6,246 workers from an occupationally diverse Police Force within the UK using a large administrative database. A series of chi-squared analyses were conducted to analyze the between and within group associations. Next, multiple logistic regression analyses using the Enter method were performed to develop a predictive model for RTW and Absence Phase. Findings substantiated the presence of individual domain barriers to RTW and predictors of RTW outcome and established the absence phase specificity of a number of risk factors of prolonged work disability. In particular, injury/illness especially mental ill health (MIH), physical job demands, sex, and number of episodes of LTSA are significant individual domain barriers to RTW and represent important risk factors for prolonged work disability. Duration of work disability is associated with medical diagnosis, especially MIH, physical job demands, sex, and number of LTSA episodes. Findings also support the importance of using the outcome measure of absence phase of risk factors in addition to RTW outcome. Copyright © 2010 Wiley-Liss, Inc.

[Family and career planning in young physicians].

PubMed

Buddeberg-Fischer, Barbara; Stamm, Martina; Klaghofer, Richard

2008-01-01

The study investigates in what way physicians integrate their desire to have children into their career planning. Within the framework of a prospective cohort study of Swiss medical school graduates on career development of young physicians, beginning in 2001, 534 participants (285 women, 249 men) were assessed in January 2007, in terms of having children, planning to have children, the career aspired to and the work-family balance used or planned. Among the study participants, 19% (54) of the women and 24% (59) of the men have children. Of the others 88% plan to start a family in the future. Female physicians with children are less advanced in their careers than women without children; for male physicians no such difference can be observed. Of the female physicians with children or the desire for children 42% aspire to work in a practice, 28% to a clinical and only 4% to an academic career. Of the male physicians with children or the desire for children one third aspire to work in a practice, one third to a clinical and 14% to an academic career. The preferred model of work repartition of female physicians with children is father full time/mother part time or both parents part time; the preferred model of male physicians is father full time/mother part time or not working. Children are an important factor in the career and life planning of physicians, female physicians paying more attention to an even work-family balance than male physicians. Copyright 2008 S. Karger AG, Basel.

Work conditions and socioeconomic inequalities in work ability.

PubMed

Aittomäki, Akseli; Lahelma, Eero; Roos, Eva

2003-04-01

The objective of this study was to investigate socioeconomic inequalities in work ability among municipal employees and the contribution of work conditions to these inequalities. The subjects were employees of the City of Helsinki and were all over 40 years of age. Data (N=1,827) were collected in the age-group-based medical check-ups by occupational health personnel. Work ability was measured with a work ability index. The association between the work ability index with socioeconomic status was examined by fitting logistic regression models. There was a consistent gradient in work ability, lower socioeconomic groups having poorer work ability. Adjusting for physical stress accounted for a substantial part of the socioeconomic inequalities. Adjusting for possibilities for influence and development at work accounted for some of the difference between white-collar and blue-collar employees, but not for differences between the white-collar subgroups among the women. Mental stress and problems in the social environment were not clearly associated with the inequalities. Socioeconomic inequalities in work ability among municipal employees correspond to the inequalities in ill health found in general populations. Physical stress at work explained a large part of the inequality. Poor possibilities to influence one's work contributed to the excess of lowered work ability among the blue-collar employees, but not to the inequalities between white-collar subgroups of women. Apart from physical workload, work conditions did not explain socioeconomic inequalities between white-collar subgroups of women.

Latest Researches Advances of Plasma Spraying: From Splat to Coating Formation

NASA Astrophysics Data System (ADS)

Fauchais, P.; Vardelle, M.; Goutier, S.

2016-12-01

The plasma spray process with solid feedstock, mainly ceramics powders, studied since the sixties is now a mature technology. The plasma jet and particle in-flight characterizations are now well established. The use of computer-aided robot trajectory allows spraying on industrial parts with complex geometries. Works about splat formation have shown the importance of: the substrate preheating over the transition temperature to get rid of adsorbates and condensates, substrate chemistry, crystal structure and substrate temperature during the whole coating process. These studies showed that coating properties strongly depend on the splat formation and layering. The first part of this work deals with a summary of conventional plasma spraying key points. The second part presents the current knowledge in plasma spraying with liquid feedstock, technology developed for about two decades with suspensions of particles below micrometers or solutions of precursors that form particles a few micrometers sized through precipitation. Coatings are finely structured and even nanostructured with properties arousing the interest of researchers. However, the technology is by far more complex than the conventional ones. The main conclusions are that models should be developed further, plasma torches and injection setups adapted, and new measuring techniques to reliably characterize these small particles must be designed.

Views of UK medical graduates about flexible and part-time working in medicine: a qualitative study.

PubMed

Evans, J; Goldacre, M J; Lambert, T W

2000-05-01

To report on the views of doctors about flexible and part-time working in medicine. As part of ongoing studies of doctors' careers, postal questionnaires were sent in 1995 and 1996 to all doctors who qualified from UK medical schools in 1977, 1988 and 1993. Structured questions about recipients' careers were accompanied by a form which invited free-text comment. Comments about flexible and part-time working were extracted for analysis. All respondents who commented on flexible and part-time working. Most doctors who commented believed there were insufficient opportunities to meet demand. They also commonly commented that there was not enough information about flexible training opportunities. Some men, as well as women, expressed a wish to work part-time. The most frequently cited reasons for part-time working were to balance career with family responsibilities, and to reduce work-related stress. Cited disadvantages of part-time working were mainly financial and included the problems of paying for childcare and professional subscriptions when on a reduced income. Some respondents perceived negative attitudes towards doctors in part-time jobs. It is well-recognised that more flexible medical career structures are needed so that doctors can vary their time commitment according to their needs at particular stages in their lives. Until recently, needs have not been adequately met. Changes in arrangements for flexible training accompanying the implementation of the specialist registrar grade may have begun to alleviate some of the problems, but others, such as negative attitudes towards part-time work, may take time to change.