A low cost mobile phone dark-field microscope for nanoparticle-based quantitative studies.

PubMed

Sun, Dali; Hu, Tony Y

2018-01-15

Dark-field microscope (DFM) analysis of nanoparticle binding signal is highly useful for a variety of research and biomedical applications, but current applications for nanoparticle quantification rely on expensive DFM systems. The cost, size, limited robustness of these DFMs limits their utility for non-laboratory settings. Most nanoparticle analyses use high-magnification DFM images, which are labor intensive to acquire and subject to operator bias. Low-magnification DFM image capture is faster, but is subject to background from surface artifacts and debris, although image processing can partially compensate for background signal. We thus mated an LED light source, a dark-field condenser and a 20× objective lens with a mobile phone camera to create an inexpensive, portable and robust DFM system suitable for use in non-laboratory conditions. This proof-of-concept mobile DFM device weighs less than 400g and costs less than $2000, but analysis of images captured with this device reveal similar nanoparticle quantitation results to those acquired with a much larger and more expensive desktop DFMM system. Our results suggest that similar devices may be useful for quantification of stable, nanoparticle-based activity and quantitation assays in resource-limited areas where conventional assay approaches are not practical. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparative effects of direct-fed microbials alone or with a trace minerals supplements on the productive performance, blood metabolites, and antioxidant status in grazing Awassi lambs.

PubMed

Alhidary, I A; Abdelrahman, M M; Khan, R U

2016-12-01

Twenty Awassi lambs were used to find the effects of direct-fed microbials (DFM) and long-acting trace minerals rumen bolus (TMB) supplements on performance, blood biochemical variables, and antioxidant status of the lambs under grazing conditions. The lambs were randomly distributed into four groups as follows: (1) untreated, (2) oral dose of 5 mL DFM, (3) TMB, or (4) oral dose of 5 mL DFM and TMB. The treatments were carried out for 90 days. Supplementation with TMB significantly increased (P < 0.05) average daily gain (ADG) and feed efficiency compared with the control. A significant (P < 0.05) increase in blood albumin in the DFM and a significant (P < 0.05) decrease in aspartate aminotrasferase were found in the lambs supplemented with TMB alone or in combination with DFM. Supplementing lambs with TMB resulted in higher glutathione peroxidase, total antioxidant capacity (P < 0.001) and activity of superoxide dismutase (P < 0.05) compared with no supplementation and supplementation with DFM only. In conclusion, TMB supplementation had a positive impact on performance traits and the antioxidant system of the lambs under grazing condition.

Performance and carcass characteristics of commercial feedlot cattle from a study of vaccine and direct-fed microbial effects on Escherichia col O157:H7 fecal shedding.

PubMed

Cull, C A; Renter, D G; Bello, N M; Ives, S E; Babcock, A H

2015-06-01

The objective of this study was to quantify cattle performance and carcass characteristics associated with administration of a siderophore receptor and porin proteins-based vaccine (VAC) and a direct-fed microbial (DFM), which were originally evaluated for their impact on O157:H7 fecal shedding in a commercial feedlot population. Cattle (P = 17,148) were randomly allocated into 40 pens grouped by allocation dates into 10 complete blocks; pens within block were randomly allocated to control, VAC, DFM, or VAC + DFM treatment groups in a 2 × 2 factorial design. The DFM (Bovamine) was fed daily at the labeled dose of 10 cfu/animal of Lactobacillus acidophilus for the duration of the intervention period (mean = 86.6 d). The VAC cattle were vaccinated on Days 0 and 21 whereas unvaccinated cattle were not given a placebo or rehandled on Day 21. Data were analyzed using general and generalized linear mixed models that accounted for the study design. Main effects of DFM and VAC are reported as there were no significant treatment interactions for any of the outcomes evaluated. Vaccinated cattle had lower total weight gain (P < 0.01), ADG (P = 0.03), and cumulative DMI during the intervention period (P < 0.01) compared with unvaccinated cattle, whereas the DFM increased total weight gain (P = 0.03) and G:F (P = 0.05) during the intervention period. Daily DMI was decreased (P < 0.01) in vaccinated pens compared with unvaccinated pens during a 5-d period immediately following revaccination. After the intervention period was completed, cattle were sorted following the standard operating procedure for the feedlot and all cattle were fed the DFM from that point until harvest. Each steer was individually identified through harvest. At harvest, vaccinated cattle had more total days on feed (P < 0.01) with a larger HCW (P = 0.01) than nonvaccinated cattle, whereas cattle not fed the DFM during the intervention period had a significantly larger HCW (P < 0.01) than those fed the DFM during the intervention period. We conclude that the use of these DFM and vaccine products have differential and independent effects on cattle performance and carcass characteristics in a commercial feedlot setting. Although the magnitude of these effects may vary among production systems, a more comprehensive understanding of the potential production costs of preharvest food safety pathogen control programs is essential if such programs are to be fully adopted in the industry.

Comparative effects of two multi-enzyme combinations and a Bacillus probiotic on growth performance, digestibility of energy and nutrients, disappearance of non-starch polysaccharides, and gut microflora in broiler chickens.

PubMed

Wealleans, A L; Walsh, M C; Romero, L F; Ravindran, V

2017-12-01

The efficacy of two exogenous enzyme combinations and a multi-strain Bacillus probiotic (DFM) on the growth performance, nutrient digestibility, disappearance of non-starch polysaccharides (NSP) and gut microbial composition was investigated in broilers. One-day old Ross 308 chicks were assigned to 36 pens with 22 birds/pen and 6 pens/treatment (Experiment 1) or 36 cages with 8 birds/cage and 6 cages/treatment (Experiment 2). Treatment additives were added to nutritionally complete corn/soy based starter (d 1 to 21) and finisher (d 22 to 42) diets. Treatments included 1) a control diet containing 500 FTU/kg phytase (CTL), 2) CTL + xylanase (2,000 U/kg) and amylase (200 U/kg; XA), 3) CTL+XA + protease (4000 U/g; XAP), 4) CTL+DFM (150,000 cfu/g of 3 strains of Bacillus spp), 5) CTL+DFM+XA, and 6) CTL+DFM+XAP. Supplementation with DFM increased BW, BWG, and FI compared with the CTL (P < 0.05); XAP, but not XA, resulted in increased final BW, BWG and FI compared to the control (P < 0.05). XA and XAP improved apparent ileal digestibility (AID) of starch and fat on d 22 to 42 with XAP improving AMEn (by ∼82 kcal) compared with CTL birds (P < 0.01). DFM+XAP improved apparent ileal digestible energy (AIDE), AID of fat and starch on d 22 to 42, and additionally had a greater than additive effect on AIDE and AMEn. Supplementation with DFM+XAP reduced the ileal and total tract flow of insoluble arabinose and additionally total tract flow of soluble and insoluble xylose and total galactose (P < 0.05); similar effects of XA+DFM were not seen or were lower in magnitude, suggesting that the protease component plays an important role in increasing the availability of NSP for hydrolysis. Supplementation with DFM alone did not affect gut bacterial populations, but XA and XAP reduced numbers of Campylobacter species (by > 2.5 log cfu/g; P < 0.001) and Bacteroides (P < 0.02) in the cecum compared with CTL birds. © The Author 2017. Published by Oxford University Press on behalf of Poultry Science Association.

Comparative effects of two multi-enzyme combinations and a Bacillus probiotic on growth performance, digestibility of energy and nutrients, disappearance of non-starch polysaccharides, and gut microflora in broiler chickens

PubMed Central

Walsh, M C; Romero, L F; Ravindran, V

2017-01-01

Abstract The efficacy of two exogenous enzyme combinations and a multi-strain Bacillus probiotic (DFM) on the growth performance, nutrient digestibility, disappearance of non-starch polysaccharides (NSP) and gut microbial composition was investigated in broilers. One-day old Ross 308 chicks were assigned to 36 pens with 22 birds/pen and 6 pens/treatment (Experiment 1) or 36 cages with 8 birds/cage and 6 cages/treatment (Experiment 2). Treatment additives were added to nutritionally complete corn/soy based starter (d 1 to 21) and finisher (d 22 to 42) diets. Treatments included 1) a control diet containing 500 FTU/kg phytase (CTL), 2) CTL + xylanase (2,000 U/kg) and amylase (200 U/kg; XA), 3) CTL+XA + protease (4000 U/g; XAP), 4) CTL+DFM (150,000 cfu/g of 3 strains of Bacillus spp), 5) CTL+DFM+XA, and 6) CTL+DFM+XAP. Supplementation with DFM increased BW, BWG, and FI compared with the CTL (P < 0.05); XAP, but not XA, resulted in increased final BW, BWG and FI compared to the control (P < 0.05). XA and XAP improved apparent ileal digestibility (AID) of starch and fat on d 22 to 42 with XAP improving AMEn (by ∼82 kcal) compared with CTL birds (P < 0.01). DFM+XAP improved apparent ileal digestible energy (AIDE), AID of fat and starch on d 22 to 42, and additionally had a greater than additive effect on AIDE and AMEn. Supplementation with DFM+XAP reduced the ileal and total tract flow of insoluble arabinose and additionally total tract flow of soluble and insoluble xylose and total galactose (P < 0.05); similar effects of XA+DFM were not seen or were lower in magnitude, suggesting that the protease component plays an important role in increasing the availability of NSP for hydrolysis. Supplementation with DFM alone did not affect gut bacterial populations, but XA and XAP reduced numbers of Campylobacter species (by > 2.5 log cfu/g; P < 0.001) and Bacteroides (P < 0.02) in the cecum compared with CTL birds. PMID:29053809

Comparative effect of direct-fed microbials on fecal shedding of Escherichia coli O157:H7 and Salmonella in naturally infected feedlot cattle.

PubMed

Tabe, Ebot S; Oloya, James; Doetkott, Dawn K; Bauer, Marc L; Gibbs, Penelope S; Khaitsa, Margaret L

2008-03-01

The effect of direct-fed microbials (DFM) on fecal shedding of Escherichia coli O157:H7 and Salmonella in naturally infected feedlot cattle was evaluated in a clinical trial involving 138 feedlot steers. Following standard laboratory methods, fecal samples collected from steers were evaluated for change in the detectable levels of E. coli O157:H7 and Salmonella shed in feces after DFM treatment. Sampling of steers was carried out every 3 weeks for 84 days. A significant reduction (32%) in fecal shedding of E. coli O157:H7 (P < 0.001), but not Salmonella (P = 0.24), was observed among the treatment steers compared with the control group during finishing. The probability of recovery of E. coli O157:H7 from the feces of treated and control steers was 34.0 and 66.0%, respectively. Steers placed on DFM supplement were almost three times less likely to shed E. coli O157:H7 (odds ratio, 0.36; 95% confidence interval, 0.25 to 0.53; P < 0.001) in their feces as opposed to their control counterparts. The probability of recovery of Salmonella from the feces of the control (14.0%) and the treated (11.3%) steers was similar. However, the DFM significantly reduced probability of new infections with Salmonella among DFM-treated cattle compared with controls (nontreated ones). It appears that DFM as applied in our study are capable of significantly reducing fecal shedding of E. coli O157:H7 in naturally infected cattle but not Salmonella. The factors responsible for the observed difference in the effects of DFM on E. coli O157:H7 and Salmonella warrants further investigation.

Design process optimization, virtual prototyping of manufacturing, and foundry-portable DFM (Invited Paper)

NASA Astrophysics Data System (ADS)

Hogan, James; Progler, Christopher; Chatila, Ahmad; Bruggeman, Bert; Heins, Mitchell; Pack, Robert; Boksha, Victor

2005-05-01

We consider modern design for manufacturing (DFM) as a manifestation of IC industry re-integration and intensive cost management dynamics. In that regard DFM is somewhat different from so-called design for yield (DFY) which essentially focuses on productivity (yield) management (that is not to say that DFM and DFY do not have significant overlaps and interactions). We clearly see the shaping of a new "full-chip DFM" infrastructure on the background of the "back to basics" design-manufacturing re-integration dynamics. In the presented work we are focusing on required DFM-efficiencies in a "foundry-fabless" link. Concepts of "virtual prototyping of manufacturing", "design process optimization", and "foundry-portable DFM" models are explored. Both senior management of the industry and leading design groups finally realize the need for a radical change of design styles. Some of the DFM super-goals are to isolate designers from process details and to make designs foundry portable. It requires qualification of designs at different foundries. In their turn, foundries specified and are implementing a set of DFM rules: "action-required", "recommended", and "guidelines" while asking designers to provide netlist and testing information. Also, we observe strong signs of innovation coming back to the mask industry. Powerful solutions are emerging and shaping up toward mask-centered IP as a business. While it seems that pure-play foundries have found their place for now in the "IDM+" model (supporting manufacturing capacity of IDMs) it is not obvious how sustainable the model is. Wafer as a production unit is not sufficient anymore; foundries are being asked by large customers to price products in terms of good die. It brings back the notion of the old ASIC business model where the foundry is responsible for dealing with both random and systematic yield issues for a given design. One scenario of future development would be that some of the leading foundries might eventually transform themselves into IDMs. Another visible trend: some of the manufacturing capacities started to diversify business by providing services for new emerging markets (for example, new energy and medicine applications). Finally it is very unclear what"s going to happen to fabless players. We continue building on the "Think SPICE again!" methodology introduced last year and expanding on previous platforms' discussion. Model expression of DFM, most probably, will be supplied by the equipment suppliers and yield management community. Actual content for a design intent model will be provided by manufacturing. Much like SPICE it describes the behavior and not what the actual measurement in manufacturing is. When the model is available and populated, a design automation solution can be created that will allow a designer to extract, analyze, simulate, and optimize the circuit prior to handoff to manufacturing.

Occupational exposure to nitrous oxide during procedural pain control in children: a comparison of different inhalation techniques and scavenging systems.

PubMed

Messeri, Andrea; Amore, Elena; Dugheri, Stefano; Bonari, Alessandro; Pompilio, Ilenia; Arcangeli, Giulio; Rizzo, Giuliana

2016-09-01

Nitrous oxide (N2 O 50% in oxygen) is commonly used for painful procedures in children. Potential negative health effects associated with chronic workplace exposure limit its use. Safe occupational N2 O exposure concentrations are below 25 ppm environmental concentration as a time-weighted average (TWA) and below 200 ppm as a short-time exposure level (STEL) of 15 min. The aim was to assess occupational exposure of staff during nitrous oxide administration to children using different inhalation delivery devices and scavenging systems. Staff nitrous oxide exposure during use of a double face mask (DFM) with or without a demand valve (DV) was compared with a conventional single face mask (FM). We also compared exposure using the hospital central scavenging system with a portable evacuation system. N2 O concentrations, representing exposure values, were monitored within proximity to staff. Urine N2 O concentration was measured in staff administering the N2 O at the end of the procedural session. The mean and median values of TWA and STEL within the working area were lower than recommended values in the DFM (10.8, 11.6 ppm for TWA; 13.9, 11.0 ppm for STEL) and DFM-DV groups (2.3, 2.8 ppm for TWA; 4.4, 3.5 ppm for STEL) using the portable evacuation system. The N2 O urine exposure in DFM-DV group was lower than DFM group: a mean difference of 9.56 ppm (95% CI 2.65-16.46). Staff N2 O urinary concentrations were within safe biological limits in both the DFM and DFM-DV groups. High exposure concentrations to N2 O were recorded in all FM and FM-DV environmental and biological samples. The DFM system, with or without a DV, connected to a portable evacuation system during N2 O administration to children for painful procedures kept N2 O levels within the local environment below recommended limits. © 2016 John Wiley & Sons Ltd.

Performance of broiler chickens fed diets supplemented with a direct-fed microbial.

PubMed

Angel, R; Dalloul, R A; Doerr, J

2005-08-01

From hatch to 18 d of age broilers were fed starter diets with (0.9 kg/ton) or without direct fed microbial (DFM). At 18 d, birds were weighed and, within DFM treatment (trt), randomly assigned to battery pens. In Exp 1, a 2 x 2 factorial arrangement of nutrient density [control (C, 19.3% protein (CP), 0.84%, Ca 0.37% nonphytin P (nPP); and 17.1% CP, 0.8% Ca, and 0.3% nPP in the grower (Gr) and finisher (Fn) diets, respectively) and moderate (M) (17% CP, 0.69% Ca, 0.30% nPP; 15% CP, 0.66% Ca, 0.25% nPP in the Gr and Fn diets, respectively)] and DFM concentration [0 or 0.9 kg/ton (++)] was used. Exp 2 was a 2 (DSM at 0 and 0.45 kg/ton) x 3 (nutrient densities) factorial. Exp 2 included a low (L) nutrient density that differed from diet M only in Ca and nPP concentrations and an added trt, diet M with 0.45 kg/ ton DFM as in Exp 1. At the end of the Gr and Fn weight, feed efficiency, apparent nutrient retention were determined, and 4 birds per pen were sampled for tibia ash. In Exp 2, gains in the Gr phase were 1,122.0, 983.7, 1,121.5, 930.7, and 1,151.5 g in birds fed the C, M, M+, L, and L+ diets, respectively. Addition of DFM to the M diet overcame the negative effect of nutrient concentration on performance but not when the L diet was fed. Nutrient level and DFM affected apparent protein, Ca, and P retention at 32 or 42 d of age with retention increasing as nutrient level decreased and with DFM added to the diet. Ca and P retention at 28 d (Exp 1) was higher in birds fed M++ (45.8 and 46%, respectively) than in those fed the C diet (38.7 and 40.0%, respectively). Feeding the M and L diets resulted in lower tibia ash than that of birds fed the C diet, but the addition of DFM to low nutrient diets overcame this negative effect.

Application of data fusion modeling (DFM) to site characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Porter, D.W.; Gibbs, B.P.; Jones, W.F.

1996-01-01

Subsurface characterization is faced with substantial uncertainties because the earth is very heterogeneous, and typical data sets are fragmented and disparate. DFM removes many of the data limitations of current methods to quantify and reduce uncertainty for a variety of data types and models. DFM is a methodology to compute hydrogeological state estimates and their uncertainties from three sources of information: measured data, physical laws, and statistical models for spatial heterogeneities. The benefits of DFM are savings in time and cost through the following: the ability to update models in real time to help guide site assessment, improved quantification ofmore » uncertainty for risk assessment, and improved remedial design by quantifying the uncertainty in safety margins. A Bayesian inverse modeling approach is implemented with a Gauss Newton method where spatial heterogeneities are viewed as Markov random fields. Information from data, physical laws, and Markov models is combined in a Square Root Information Smoother (SRIS). Estimates and uncertainties can be computed for heterogeneous hydraulic conductivity fields in multiple geological layers from the usually sparse hydraulic conductivity data and the often more plentiful head data. An application of DFM to the Old Burial Ground at the DOE Savannah River Site will be presented. DFM estimates and quantifies uncertainty in hydrogeological parameters using variably saturated flow numerical modeling to constrain the estimation. Then uncertainties are propagated through the transport modeling to quantify the uncertainty in tritium breakthrough curves at compliance points.« less

Application of data fusion modeling (DFM) to site characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Porter, D.W.; Gibbs, B.P.; Jones, W.F.

1996-12-31

Subsurface characterization is faced with substantial uncertainties because the earth is very heterogeneous, and typical data sets are fragmented and disparate. DFM removes many of the data limitations of current methods to quantify and reduce uncertainty for a variety of data types and models. DFM is a methodology to compute hydrogeological state estimates and their uncertainties from three sources of information: measured data, physical laws, and statistical models for spatial heterogeneities. The benefits of DFM are savings in time and cost through the following: the ability to update models in real time to help guide site assessment, improved quantification ofmore » uncertainty for risk assessment, and improved remedial design by quantifying the uncertainty in safety margins. A Bayesian inverse modeling approach is implemented with a Gauss Newton method where spatial heterogeneities are viewed as Markov random fields. Information from data, physical laws, and Markov models is combined in a Square Root Information Smoother (SRIS). Estimates and uncertainties can be computed for heterogeneous hydraulic conductivity fields in multiple geological layers from the usually sparse hydraulic conductivity data and the often more plentiful head data. An application of DFM to the Old Burial Ground at the DOE Savannah River Site will be presented. DFM estimates and quantifies uncertainty in hydrogeological parameters using variably saturated flow numerical modeling to constrain the estimation. Then uncertainties are propagated through the transport modeling to quantify the uncertainty in tritium breakthrough curves at compliance points.« less

Software to model AXAF image quality

NASA Technical Reports Server (NTRS)

Ahmad, Anees

1993-01-01

This draft final report describes the work performed under this delivery order from May 1992 through June 1993. The purpose of this contract was to enhance and develop an integrated optical performance modeling software for complex x-ray optical systems such as AXAF. The GRAZTRACE program developed by the MSFC Optical Systems Branch for modeling VETA-I was used as the starting baseline program. The original program was a large single file program and, therefore, could not be modified very efficiently. The original source code has been reorganized, and a 'Make Utility' has been written to update the original program. The new version of the source code consists of 36 small source files to make it easier for the code developer to manage and modify the program. A user library has also been built and a 'Makelib' utility has been furnished to update the library. With the user library, the users can easily access the GRAZTRACE source files and build a custom library. A user manual for the new version of GRAZTRACE has been compiled. The plotting capability for the 3-D point spread functions and contour plots has been provided in the GRAZTRACE using the graphics package DISPLAY. The Graphics emulator over the network has been set up for programming the graphics routine. The point spread function and the contour plot routines have also been modified to display the plot centroid, and to allow the user to specify the plot range, and the viewing angle options. A Command Mode version of GRAZTRACE has also been developed. More than 60 commands have been implemented in a Code-V like format. The functions covered in this version include data manipulation, performance evaluation, and inquiry and setting of internal parameters. The user manual for these commands has been formatted as in Code-V, showing the command syntax, synopsis, and options. An interactive on-line help system for the command mode has also been accomplished to allow the user to find valid commands, command syntax, and command function. A translation program has been written to convert FEA output from structural analysis to GRAZTRACE surface deformation file (.dfm file). The program can accept standard output files and list files from COSMOS/M and NASTRAN finite analysis programs. Some interactive options are also provided, such as Cartesian or cylindrical coordinate transformation, coordinate shift and scale, and axial length change. A computerized database for technical documents relating to the AXAF project has been established. Over 5000 technical documents have been entered into the master database. A user can now rapidly retrieve the desired documents relating to the AXAF project. The summary of the work performed under this contract is shown.

The use of direct-fed microbials for mitigation of ruminant methane emissions: a review.

PubMed

Jeyanathan, J; Martin, C; Morgavi, D P

2014-02-01

Concerns about the environmental effect and the economic burden of methane (CH4) emissions from ruminants are driving the search for ways to mitigate rumen methanogenesis. The use of direct-fed microbials (DFM) is one possible option to decrease CH4 emission from ruminants. Direct-fed microbials are already used in ruminants mainly to increase productivity and to improve health, and are readily accepted by producers and consumers alike. However, studies on the use of DFM as rumen CH4 mitigants are scarce. A few studies using Saccharomyces cerevisiae have shown a CH4-decreasing effect but, to date, there has not been a systematic exploration of DFM as modulators of rumen methanogenesis. In this review, we explored biochemical pathways competing with methanogenesis that, potentially, could be modulated by the use of DFM. Pathways involving the redirection of H2 away from methanogenesis and pathways producing less H2 during feed fermentation are the preferred options. Propionate formation is an example of the latter option that in addition to decrease CH4 formation increases the retention of energy from the diet. Homoacetogenesis is a pathway using H2 to produce acetate, however up to now no acetogen has been shown to efficiently compete with methanogens in the rumen. Nitrate and sulphate reduction are pathways competing with methanogenesis, but the availability of these substances in the rumen is limited. Although there were studies using nitrate and sulphate as chemical additives, use of DFM for improving these processes and decrease the accumulation of toxic metabolites needs to be explored more. There are some other pathways such as methanotrophy and capnophily or modes of action such as inhibition of methanogens that theoretically could be provided by DFM and affect methanogenesis. We conclude that DFM is a promising alternative for rumen methane mitigation that should be further explored for their practical usage.

Screening of bacterial direct-fed microbials for their antimethanogenic potential in vitro and assessment of their effect on ruminal fermentation and microbial profiles in sheep.

PubMed

Jeyanathan, J; Martin, C; Morgavi, D P

2016-02-01

Direct-fed microbials (DFM) are used to modulate ruminal function and induce beneficial effects on ruminants. The objectives of this work were to 1) screen bacterial strains for their antimethanogenic potential in vitro and 2) assess the effect of 3 selected DFM on ruminal methane (CH) emissions, fermentation parameters, and microbial profiles in sheep. Forty-five bacterial strains were preselected based on their metabolism and fermentation characteristics. These bacteria were screened for their ability to reduce ruminal methanogenesis using 24-h batch incubations and an inoculum of 10 cfu/mL of medium. The addition of bacterial strains stimulated ruminal fermentation with increases in total gas production for 41 strains ( < 0.05) without a concomitant increase in CH production (only 9 strains had higher CH than the controls without DFM; < 0.05). 53-W, D31, and D1 had the greatest difference between total gas and CH production and were selected for further in vivo testing. Twelve rumen-cannulated Texel wethers were divided into 3 groups and were treated daily for 4 wk with 6 × 10 cfu/animal for and and 3 × 10 cfu/animal for . Measures of enteric CH, ruminal fermentation, and ruminal microbial traits were performed before, at 2 and 4 wk during the treatment period, and at 2 wk after the DFM treatment stopped. Methane production was reduced by 13% ( < 0.05) with after 2 wk of DFM administration, and this effect was maintained throughout the treatment and posttreatment periods. In contrast, had no effect on CH production, and increased it by 16% ( < 0.05) after 4 wk of DFM administration. There was no effect on other fermentation parameters or on the bacterial, archaeal, and protozoal numbers monitored by quantitative PCR. However, denaturing gradient gel electrophoresis profiles indicated changes in bacterial and archaeal diversity in the and groups. Although added bacteria were unable to permanently colonize the rumen, had a greater 24-h survival rate than the others, implying that the persistence of DFM may be important for modulating ruminal traits of interest. These results suggest that bacterial DFM used in this trial were able to modify CH emissions, although correlated changes in other ruminal parameters studied were minor.

Effects of the inclusion of a Bacillus direct-fed microbial on performance parameters, bone quality, recovered gut microflora, and intestinal morphology in broilers consuming a grower diet containing corn distillers dried grains with solubles

PubMed Central

Latorre, J. D.; Hernandez-Velasco, X.; Vicente, J. L.; Wolfenden, R.; Hargis, B. M.; Tellez, G.

2017-01-01

Abstract Distillers dried grains with solubles (DDGS) have increasingly been used in poultry diets as a consequence of rising grain costs. Some, but not all, sources of DDGS have a variable compositional value, and a high inclusion of this by-product could be considered a risk factor for presentation of enteric diseases. Presently, 2 experiments were conducted using a starter corn-soybean diet (zero to 7 d) and a corn-DDGS-soybean grower diet (8 to 28 d) with or without inclusion of a Bacillus-direct-fed microbial (DFM). In both experiments, day-of-hatch chicks were randomly assigned to 2 different groups: control group without DFM or Bacillus-DFM group, containing 106 spores/g of feed. In each experiment, 8 pens of 20 chicks (n = 160/group) were used. Performance parameters of BW, BW gain (BWG), feed intake (FI), and feed conversion (FCR) were evaluated in each growth phase. Additionally, in experiment 2, intestinal samples were collected to determine duodenal and ileal morphology (n = 8/group), as well as the microbiota population of total lactic acid bacteria (TLAB), total Gram-negative bacteria (TGNB), and total anaerobic bacteria (TAB) on d 28 (n = 16/group). Furthermore, both tibias were evaluated for bone strength and bone composition (n = 16/group). In both experiments BW, BWG, and FCR were improved by the DFM when compared to the control group (P < 0.05). In experiment 2, chickens supplemented with the DFM had less TGNB in the foregut intestinal segment and higher TLAB counts in both foregut and hindgut sections (P < 0.05). In addition significant increases in tibia breaking strength and bone mineralization were observed in the DFM group when compared with the control. In the case of intestinal morphology, DFM dietary inclusion increased villus height (VH), villus width, villus area, muscular thickness, and the VH to crypt depth ratio (VH:CD) in both duodenum and ileum sections. Results of the present study suggest that consumption of a selected Bacillus-DFM producing a variable set of enzymes could contribute to enhanced performance, intestinal microbial balance, and bone quality in broiler chickens consuming a grower diet that contains corn-DDGS. PMID:28419329

Short communication: Effects of increasing protein and energy in the milk replacer with or without direct-fed microbial supplementation on growth and performance of preweaned Holstein calves.

PubMed

Geiger, A J; Ward, S H; Williams, C C; Rude, B J; Cabrera, C J; Kalestch, K N; Voelz, B E

2014-11-01

Forty-four Holstein calves were fed a direct-fed microbial (DFM) and 1 of 2 milk replacers to evaluate calf performance and growth. Treatments were (1) a control milk replacer [22:20; 22% crude protein (CP) and 20% fat], (2) an accelerated milk replacer (27:10; 27% CP and 10% fat), (3) the control milk replacer with added DFM (22:20+D), and (4) the accelerated milk replacer with added DFM (27:10+D). Dry matter intake, rectal temperatures, respiration scores and rates, and fecal scores were collected daily. Body weight, hip and withers height, heart girth, blood, and rumen fluid samples were collected weekly. Effects of treatment, sex, week, and their interactions were analyzed. Calves fed an accelerated milk replacer, regardless of DFM supplementation, consumed more CP and metabolizable energy in the milk replacer. No treatment differences were found for starter intake or intake of neutral detergent fiber or acid detergent fiber in the starter. Calves fed the accelerated milk replacer had greater preweaning and weaning body weight compared with calves fed the control milk replacer. Average daily gain was greater during the preweaning period for calves fed the accelerated milk replacer, but the same pattern did not hold true during the postweaning period. Feed efficiency did not differ among treatments. Hip height tended to be and withers height and heart girth were greater at weaning for calves fed the accelerated milk replacer compared with calves fed the control milk replacer. Fecal scores were greatest in calves fed DFM. Overall acetate, propionate, butyrate, and n-valerate concentrations were lower in calves fed the accelerated milk replacer, but DFM did not have an effect. Rumen pH was not different. Blood metabolites were unaffected by DFM supplementation, but calves fed the accelerated milk replacer had increased partial pressure of CO2, bicarbonate, and total bicarbonate in the blood. Direct-fed microbial supplementation did not appear to benefit the calf in this trial. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Effects of a 3 strain -based direct-fed microbial and dietary fiber concentration on growth performance and expression of genes related to absorption and metabolism of volatile fatty acids in weanling pigs.

PubMed

Jaworski, N W; Owusu-Asiedu, A; Walsh, M C; McCann, J C; Loor, J J; Stein, H H

2017-01-01

Effects of a -based direct-fed microbial (DFM) on growth performance, plasma tumor necrosis factor ɑ (TNFɑ), relative gene expression, and intestinal VFA concentrations in weanling pigs fed low- or high-fiber diets were evaluated. Two hundred pigs (initial BW: 6.31 ± 0.73 kg) were allotted to 1 of 4 dietary treatments (5 pigs per pen and 10 pens per treatment). Treatments were arranged in a 2 × 2 factorial design with 2 diet types [low-fiber (LF) or high-fiber (HF)] and 2 concentrations of DFM (0 or 60 g DFM/t of feed). The DFM contained 1.5 × 10 cfu/g and was obtained from Danisco Animal Nutrition-DuPont Industrial Biosciences, Marlborough, UK. Phase 1 diets were fed for 2 wk post-weaning and phase 2 diets were fed over the following 29 d. Low fiber diets contained corn and soybean meal as main ingredients and HF diets contained corn, soybean meal, corn distillers dried grains with solubles (7.5 and 15.0% in phase 1 and 2, respectively), and wheat middlings (10.0%). Pigs and feed were weighed at the start and at the end of each phase, and ADG, ADFI, and G:F were calculated. At the conclusion of phase 2, blood was collected from 1 pig per pen and 1 pig per pen was sacrificed. Cecum and rectum contents were analyzed for VFA, and tissue samples were collected from the ileum, cecum, rectum, and liver to determine expression of genes related to absorption and metabolism of VFA using quantitative reverse transcription-PCR. Results indicated that feeding HF diets reduced ( ≤ 0.05) ADFI and ADG of pigs compared with feeding LF diets. Pigs fed DFM diets had improved ( ≤ 0.05) G:F compared with pigs fed non-DFM diets. Pigs fed LF diets had greater ( ≤ 0.05) BW at the end of phase 2 compared with pigs fed HF diets. The concentration of VFA in rectum contents was greater ( ≤ 0.05) in pigs fed LF diets than in pigs fed HF diets. The expression of in the rectum of pigs fed HF diets was greater ( ≤ 0.05) than for pigs fed LF diets, and pigs fed DFM-containing diets had an increased ( ≤ 0.05) expression of in the liver. Pigs fed HF diets had greater ( ≤ 0.05) concentrations of urea N in plasma compared with pigs fed LF diets, but dietary fiber and DFM had no effect on plasma concentration of TNF-ɑ. In conclusion, the -based DFM improved overall G:F of weanling pigs, but pigs fed LF diets had greater final BW than pigs fed HF diets.

Transcriptome profiles of chicken intestinal intraepithelial lymphocytes altered by the intake of a multi-strain direct-fed microbials

USDA-ARS?s Scientific Manuscript database

The current study was conducted to investigate the effects of the direct-fed microbials (DFM) including three Bacillus subtilis strains on the modulation of transcriptional profile in chicken intestinal intraepithelial lymphocytes (IEL). The multiple-strain DFM product modified 453 probes from 1,98...

Longitudinal Study of a Dual-Factor Model of Mental Health in Chinese Youth

ERIC Educational Resources Information Center

Xiong, Junmei; Qin, Yi; Gao, Miaomiao; Hai, Man

2017-01-01

By incorporating psychopathology and subjective well-being (SWB), the dual-factor model of mental health (DFM) can comprehensively measure psychological health. We examined the utility of the DFM among 1,293 Chinese adolescents (Grades 7-12). Furthermore, we examined the dynamics of mental health group membership via a two-wave longitudinal study…

Post-decomposition optimizations using pattern matching and rule-based clustering for multi-patterning technology

NASA Astrophysics Data System (ADS)

Wang, Lynn T.-N.; Madhavan, Sriram

2018-03-01

A pattern matching and rule-based polygon clustering methodology with DFM scoring is proposed to detect decomposition-induced manufacturability detractors and fix the layout designs prior to manufacturing. A pattern matcher scans the layout for pre-characterized patterns from a library. If a pattern were detected, rule-based clustering identifies the neighboring polygons that interact with those captured by the pattern. Then, DFM scores are computed for the possible layout fixes: the fix with the best score is applied. The proposed methodology was applied to two 20nm products with a chip area of 11 mm2 on the metal 2 layer. All the hotspots were resolved. The number of DFM spacing violations decreased by 7-15%.

Finding the right way: DFM versus area efficiency for 65 nm gate layer lithography

NASA Astrophysics Data System (ADS)

Sarma, Chandra S.; Scheer, Steven; Herold, Klaus; Fonseca, Carlos; Thomas, Alan; Schroeder, Uwe P.

2006-03-01

DFM (Design for Manufacturing) has become a buzzword for lithography since the 90nm node. Implementing DFM intelligently can boost yield rates and reliability in semiconductor manufacturing significantly. However, any restriction on the design space will always result in an area loss, thus diminishing the effective shrink factor for a given technology. For a lithographer, the key task is to develop a manufacturable process, while not sacrificing too much area. We have developed a high performing lithography process for attenuated gate level lithography that is based on aggressive illumination and a newly optimized SRAF placement schemes. In this paper we present our methodology and results for this optimization, using an anchored simulation model. The wafer results largely confirm the predictions of the simulations. The use of aggressive SRAF (Sub Resolution Assist Features) strategy leads to reduction of forbidden pitch regions without any SRAF printing. The data show that our OPC is capable of correcting the PC tip to tip distance without bridging between the tips in dense SRAM cells. SRAF strategy for various 2D cases has also been verified on wafer. We have shown that aggressive illumination schemes yielding a high performing lithography process can be employed without sacrificing area. By carefully choosing processing conditions, we were able develop a process that has very little restrictions for design. In our approach, the remaining issues can be addressed by DFM, partly in data prep procedures, which are largely area neutral and transparent to the designers. Hence, we have shown successfully, that DFM and effective technology shrinks are not mutually exclusive.

Nuclear power plant digital system PRA pilot study with the dynamic flow-graph methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yau, M.; Motamed, M.; Guarro, S.

2006-07-01

Current Probabilistic Risk Assessment (PRA) methodology is well established in analyzing hardware and some of the key human interactions. However processes for analyzing the software functions of digital systems within a plant PRA framework, and accounting for the digital system contribution to the overall risk are not generally available nor are they well understood and established. A recent study reviewed a number of methodologies that have potential applicability to modeling and analyzing digital systems within a PRA framework. This study identified the Dynamic Flow-graph Methodology (DFM) and the Markov Methodology as the most promising tools. As a result of thismore » study, a task was defined under the framework of a collaborative agreement between the U.S. Nuclear Regulatory Commission (NRC) and the Ohio State Univ. (OSU). The objective of this task is to set up benchmark systems representative of digital systems used in nuclear power plants and to evaluate DFM and the Markov methodology with these benchmark systems. The first benchmark system is a typical Pressurized Water Reactor (PWR) Steam Generator (SG) Feedwater System (FWS) level control system based on an earlier ASCA work with the U.S. NRC 2, upgraded with modern control laws. ASCA, Inc. is currently under contract to OSU to apply DFM to this benchmark system. The goal is to investigate the feasibility of using DFM to analyze and quantify digital system risk, and to integrate the DFM analytical results back into the plant event tree/fault tree PRA model. (authors)« less

Evaluation of a Direct-Fed Microbial Product Effect on the Prevalence and Load of Escherichia coli O157:H7 in Feedlot Cattle

USDA-ARS?s Scientific Manuscript database

Direct fed microbials (DFM) have been identified as potential pre-harvest interventions for the reduction of foodborne bacterial pathogens such as E. coli O157:H7. This study evaluated the efficacy of a direct fed microbial (DFM) consisting of Bacillus subtilis strain 166 as an antimicrobial interve...

The effects of the DFM CLOSTAT® and experimental Salmonella challenge on the microbiome of the ileum in weaned Holstein steer calves

USDA-ARS?s Scientific Manuscript database

Direct Fed Microbials (DFM) are probiotic-type compounds that are utilized in calf feeding operations as novel, non-antibiotic technologies to improve health and performance. The modes of action of most probiotics remain unknown, but their impacts on the microbial ecology of the GI tract may be res...

Atomic force microscopy studies of human rhinovirus topology and molecular forces.

PubMed

Kienberger, Ferry; Zhu, Rong; Rankl, Christian; Gruber, Hermann J; Blaas, Dieter; Hinterdorfer, Peter

2010-01-01

Dynamic force microscopy (DFM) allows for imaging of the structure and assessment of the function of biological specimens in their physiological environment. In DFM, the cantilever is oscillated at a given frequency and touches the sample only at the end of its downward movement. Accordingly, the problem of lateral forces displacing or even destroying biomolecules is virtually inexistent as the contact time and friction forces are greatly reduced. Here, we describe the use of DFM in studies of human rhinovirus serotype 2 (HRV2). The capsid of HRV2 was reproducibly imaged without any displacement of the virus. Release of the genomic RNA from the virions was initiated by exposure to low-pH buffer and snapshots of the extrusion process were obtained. DFM of the single-stranded RNA genome of an HRV showed loops protruding from a condensed RNA core, 20-50 nm in height. The mechanical rigidity of the RNA was determined by single molecule pulling experiments. From fitting RNA stretching curves to the worm-like-chain (WLC) model a persistence length of 1.0+/-0.17 nm was obtained. Copyright (c) 2010 Elsevier Inc. All rights reserved.

DfM requirements and ROI analysis for system-on-chip

NASA Astrophysics Data System (ADS)

Balasinski, Artur

2005-11-01

DfM (Design-for-Manufacturability) has become staple requirement beyond 100 nm technology node for efficient generation of mask data, cost reduction, and optimal circuit performance. Layout pattern has to comply to many requirements pertaining to database structure and complexity, suitability for image enhancement by the optical proximity correction, and mask data pattern density and distribution over the image field. These requirements are of particular complexity for Systems-on-Chip (SoC). A number of macro-, meso-, and microscopic effects such as reticle macroloading, planarization dishing, and pattern bridging or breaking would compromise fab yield, device performance, or both. In order to determine the optimal set of DfM rules applicable to the particular designs, Return-on-Investment and Failure Mode and Effect Analysis (FMEA) are proposed.

The impacts of dental filling materials on RapidArc treatment planning and dose delivery: Challenges and solution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mail, Noor; Al-Ghamdi, S.; Saoudi, A.

Purpose: The presence of high-density material in the oral cavity creates dose perturbation in both downstream and upstream directions at the surfaces of dental filling materials (DFM). In this study, the authors have investigated the effect of DFM on head and neck RapidArc treatment plans and delivery. Solutions are proposed to address (1) the issue of downstream dose perturbation, which might cause target under dosage, and (2) to reduce the upstream dose from DFM which may be the primary source of mucositis. In addition, an investigation of the clinical role of a custom-made plastic dental mold/gutter (PDM) in sparing themore » oral mucosa and tongue reaction is outlined.Methods: The influence of the dental filling artifacts on dose distribution was investigated using a geometrically well-defined head and neck intensity modulated radiation therapy (IMRT) verification phantom (PTW, Freiberg, Germany) with DFM inserts called amalgam, which contained 50% mercury, 25% silver, 14% tin, 8% copper, and 3% other trace metals. Three RapidArc plans were generated in the Varian Eclipse System to treat the oral cavity using the same computer tomography (CT) dataset, including (1) a raw CT image, (2) a streaking artifacts region, which was replaced with a mask of 10 HU, and (3) a 2 cm-thick 6000 HU virtual filter [a volume created in treatment planning system to compensate for beam attenuation, where the thickness of this virtual filter is based on the measured percent depth dose (PDD) data and Eclipse calculation]. The dose delivery for the three plans was verified using Gafchromic-EBT2 film measurements. The custom-made PDM technique to reduce backscatter dose was clinically tested on four head and neck cancer patients (T3, N1, M0) with DFM, two patients with PDM and the other two patients without PDM. The thickness calculation of the PDM toward the mucosa and tongue was purely based on the measured upstream dose. Patients’ with oral mucosal reaction was clinically examined initially and weekly during the course of radiotherapy.Results: For a RapidArc treatment technique, the backscatter dose from the DFM insert was measured to be 9.25 ± 2.17 in the IMRT-verification-phantom. The measured backscatter upstream dose from DFM for a single-field was 22% higher than without the DFM, whereas the downstream dose was lower by 14%. The values of homogeneity index for the plans with and without the application of mask were 0.09 and 0.14, respectively. The calculated mean treatment planning volume (PTV) dose differed from the delivered dose by 13% and was reduced to 2% when using the mask and virtual filter together. A grade 3 mucosa reaction was observed in the control group after 22–24 fractions (44–48 Gy). In contrast, no grade 3 mucositis was observed in the patients wearing the PDM after 25–26 fractions (50–52 Gy).Conclusions: The backscatter from the DFM for a single, parallel-opposed fields, and RapidArc treatment technique was found significant. The application of mask in replacing streaking artifacts can be useful in improving dose homogeneity in the PTV. The use of a virtual filter around the teeth during the planning phase reduces the target underdosage issue in the phantom. Furthermore, a reduction in mucositis is observed in the head and neck patients with the use of PDM.« less

Investigation of the effect of physical parameters on the design of tumour targeting agents

NASA Astrophysics Data System (ADS)

Casey, Joanne Lois

Tumour targeting using radiolabelled antibodies for radioimmunodetection (RAID) and radioimmunotherapy (RIT) has been studied for many years. The main factors that have limited clinical success are low tumour uptake, immunogenicity and poor therapeutic ratios. This thesis has applied current technology to make advances in this area of research. The effect of physical parameters (antibody size, valency, affinity and charge) on the design of tumour targeting agents was studied by constructing divalent (DFM) and trivalent (TFM) forms of the murine anti-CEA antibody A5B7 Fab' by chemical cross-linking. This involves partial reduction of the hinge disulphides to expose thiol (-SH) groups and subsequent reaction with a maleimide cross-linker to form a thioether bond at the hinge region. Previous studies have suggested that the stability of thioether bonds is superior to naturally occurring disulphide bonds present at the hinge region of IgG and F(ab')2. The aim was to compare the functional affinities and in vivo tumour targeting in nude mice bearing human tumour xenografts of DFM and TFM to similar sized parent IgG and F(ab')2. Radiolabelling with 131I and 90Y was also compared with a view to determine which combination would be optimal for RIT. Results clearly demonstrated a significantly faster on-rate of DFM compared to all other antibody forms and estimated dosimetry analysis suggested that DFM would be the most suitable antibody form radiolabelled with 131I for RIT. Both F(ab')2 and DFM showed high kidney uptake levels on labelling with which is unacceptable for RIT. Despite the improved tumour: blood ratios for TFM, the increased estimated dose to normal tissues and lower therapeutic effect in RIT studies suggests that the most promising combination with the radionuclide appears to be IgG. A humanised version of A5B7 hFab' has been constructed previously in order to reduce its immunogenicity in man. The in vivo stability of hDFM proved to be superior to hF(ab')2 in the nude mouse xenograft model. To study the safety, stability and tumour targeting of hDFM a clinical trial using 131I was described here including details of production, characterisation, pharmacokinetics and dosimetry. ScFv's are known to have favourable tumour targeting characteristics compared to whole antibodies for RAID. To evaluate the clinical potential of a scFv, the methodology to prepare a phage derived scFv with the aid of a subcloned hexahistidine tail was described here. To enhance the clinical potential of scFv's a construct consisting of a hinge region containing a single cysteine residue was constructed. This enabled site-specific 99mTc-labelling and could facilitate multimerisation. One of the major limitations revealed by this and other studies is the problem associated with renal accretion of antibody fragments. Various modification techniques and blocking effects were used here in attempt to reduce the kidney uptake levels in mouse models. Reduction of the pi of A5B7 Fab by attachment of NHS-ester groups was effective in lowering kidney uptake levels, but losses in immunoreactivity could limit this approach. Attachment of PEG (5kD) to DFM did not adversely affect immunoreactivity and increased the circulation time of DFM in vivo. This has implications for reducing kidney uptake levels at early time points, in addition PEG is known to reduce immunogenicity of proteins.

A new method for calculating ecological flow: Distribution flow method

NASA Astrophysics Data System (ADS)

Tan, Guangming; Yi, Ran; Chang, Jianbo; Shu, Caiwen; Yin, Zhi; Han, Shasha; Feng, Zhiyong; Lyu, Yiwei

2018-04-01

A distribution flow method (DFM) and its ecological flow index and evaluation grade standard are proposed to study the ecological flow of rivers based on broadening kernel density estimation. The proposed DFM and its ecological flow index and evaluation grade standard are applied into the calculation of ecological flow in the middle reaches of the Yangtze River and compared with traditional calculation method of hydrological ecological flow, method of flow evaluation, and calculation result of fish ecological flow. Results show that the DFM considers the intra- and inter-annual variations in natural runoff, thereby reducing the influence of extreme flow and uneven flow distributions during the year. This method also satisfies the actual runoff demand of river ecosystems, demonstrates superiority over the traditional hydrological methods, and shows a high space-time applicability and application value.

Data flow manager for DART

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, D.; Black, D.; Slimmer, D.

1994-04-01

The DART Data Flow Manager (dfm) integrates a buffer manager with a requester/provider model for scheduling work on buffers. Buffer lists, representing built events or other data, are queued by service requesters to service providers. Buffers may be either internal (reside on the local node), or external (located elsewhere, e.g., dual ported memory). Internal buffers are managed locally. Wherever possible, dfm moves only addresses of buffers rather than buffers themselves.

Data flow manager for DART

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, D.; Black, D.; Slimmer, D.

1994-12-31

The DART Data Flow Manager (dfm) integrates a buffer manager with a requester/provider model for scheduling work on buffers. Buffer lists, representing built events or other data, are queued by service requesters to service providers. Buffers may be either internal (reside on the local node), or external (located elsewhere, e.g., dual ported memory). Internal buffers are managed locally. Wherever possible, dfm moves only addresses of buffers rather than buffers themselves.

Aircraft Anomaly Detection Using Performance Models Trained on Fleet Data

NASA Technical Reports Server (NTRS)

Gorinevsky, Dimitry; Matthews, Bryan L.; Martin, Rodney

2012-01-01

This paper describes an application of data mining technology called Distributed Fleet Monitoring (DFM) to Flight Operational Quality Assurance (FOQA) data collected from a fleet of commercial aircraft. DFM transforms the data into aircraft performance models, flight-to-flight trends, and individual flight anomalies by fitting a multi-level regression model to the data. The model represents aircraft flight performance and takes into account fixed effects: flight-to-flight and vehicle-to-vehicle variability. The regression parameters include aerodynamic coefficients and other aircraft performance parameters that are usually identified by aircraft manufacturers in flight tests. Using DFM, the multi-terabyte FOQA data set with half-million flights was processed in a few hours. The anomalies found include wrong values of competed variables, (e.g., aircraft weight), sensor failures and baises, failures, biases, and trends in flight actuators. These anomalies were missed by the existing airline monitoring of FOQA data exceedances.

Analysis of the effects of growth hormone, exercise and food restriction on cancellous bone in different bone sites in middle-aged female rats.

PubMed

Banu, J; Orhii, P B; Okafor, M C; Wang, L; Kalu, D N

2001-06-01

The aim of this study is to determine the effects of growth hormone (GH), exercise (EX), GH+EX and food restriction on cancellous bone in middle-aged female rats. Female F344 rats aged 13 months were divided into (1) age-matched controls; (2) GH treated (2.5 mg/kg. 5 day/week); (3) EX (voluntary wheel running); (4) GH+EX; and (5) food restricted (FR) (fed 60% of the ad libitum food intake). The animals were treated for 18 weeks, at the end of which they were sacrificed. Cancellous bone and cortical bone in the fourth lumbar vertebra, proximal tibial metaphysis (PTM), distal femoral metaphysis (DFM) and femoral neck (NF) were analyzed using peripheral quantitative computerized tomography (pQCT) densitometry. Growth hormone increased cancellous bone area, cancellous bone mineral content, cortical bone area and cortical bone mineral content in the vertebra, PTM, DFM and NF. The tibial muscle wet weight was increased significantly after GH treatment. Exercise increased the cancellous bone area in the vertebra, PTM and DFM. Cortical bone area and cortical bone mineral content increased after EX in the vertebra, PTM, DFM and NF. No significant change was seen in the tibial muscle wet weight after EX. Growth hormone+EX increased cancellous bone area in the vertebra PTM and DFM but had no effect in neck of the femur. Cancellous bone mineral content, cortical bone area and cortical bone mineral content increased with GH+EX in the vertebra, PTM, DFM and NF. The tibial muscle wet weight was increased significantly with GH+EX. Food restriction decreased cancellous bone area and cancellous bone mineral content in all the bones studied. The decrease was statistically significant only at the distal femoral metaphysis. The tibial muscle wet weight decreased when compared with the age-matched control, but this decrease was not statistically significant. We conclude that the effect of the dose of GH used and the levels of voluntary wheel running EX used increased cancellous bone in intact rats; the effect of GH is much greater and different bones respond with varying intensities. The effects of combined treatment of GH and EX on cancellous bone are not always significantly higher than those of GH alone. FR at the level studied has a mostly negative effect on cancellous bone.

A multicentre European registry to evaluate the Direct Flow Medical transcatheter aortic valve system for the treatment of patients with severe aortic stenosis.

PubMed

Naber, Christoph K; Pyxaras, Stylianos A; Ince, Hüseyin; Frambach, Peter; Colombo, Antonio; Butter, Christian; Gatto, Fernando; Hink, Ulrich; Nickenig, Georg; Bruschi, Giuseppe; Brueren, Guus; Tchétché, Didier; Den Heijer, Peter; Schillinger, Wolfgang; Scholtz, Smita; Van der Heyden, Jan; Lefèvre, Thierry; Gilard, Martine; Kuck, Karl-Heinz; Schofer, Joachim; Divchev, Dimitar; Baumgartner, Helmut; Asch, Federico; Wagner, Daniel; Latib, Azeem; De Marco, Federico; Kische, Stephan

2016-12-10

Our aim was to assess the clinical outcomes of the Direct Flow Medical Transcatheter Aortic Valve System (DFM-TAVS), when used in routine clinical practice. This is a prospective, open-label, multicentre, post-market registry of patients treated with DFM-TAVS according to approved commercial indications. Echocardiographic and angiographic data were evaluated by an independent core laboratory and adverse events were adjudicated and classified according to VARC-2 criteria by an independent clinical events committee. The primary endpoint was freedom from all-cause mortality at 30 days post procedure. Secondary endpoints included procedural, early safety and efficacy endpoints at 30 days. Two hundred and fifty patients with severe aortic stenosis undergoing transcatheter aortic valve implantation (TAVI) with the DFM-TAVS were enrolled in 21 European centres. The primary endpoint, freedom from all-cause mortality at 30 days, was met in 98% (245/250) of patients. Device success was 83.8%. Moderate or severe aortic regurgitation was reported in 3% of patients, and none/trace regurgitation in 73% of patients. Post-procedural permanent pacemaker implantation was performed in 30 patients (12.0%). The DFM-TAVS was associated with good short-term outcomes in this real-world registry. The low pacemaker and aortic regurgitation rates confirm the advantages of this next-generation transcatheter heart valve (THV).

Effect of a direct-fed microbial (Primalac) on structure and ultrastructure of small intestine in turkey poults.

PubMed

Rahimi, S; Grimes, J L; Fletcher, O; Oviedo, E; Sheldon, B W

2009-03-01

The effects of dietary supplementation of the direct-fed microbial (DFM) Primalac in mash or crumbled feed on histological and ultrastructural changes of intestinal mucosa was determined in 2 populations of poults; 1 with and 1 without a Salmonella spp. challenge. Three hundred thirty-six 1-d-old female Large White turkey poults were randomly distributed into 8 treatment groups with 6 replicates of 7 poults in each pen. The poults were placed on 1 of 4 dietary treatments in a 2 x 2 x 2 factorial arrangement (mash or crumble feed, with or without DFM, not-challenged or challenged at 3 d of age). The DFM groups were fed a Primalac-supplemented diet from d 1 until the last day of the experiment (d 21). At 3 d of age, 50% of the poults were challenged with 1 mL of 10(10) cfu/ mL of Salmonella spp. (Salmonella enterica serovar Typhimurium, Salmonella Heidelberg, and Salmonella Kentucky) by oral gavage. The inoculated poults were housed in a separate room from nonchallenged controls. Feed and water were provided ad libitum for all birds. At d 21, 1 poult per pen (total of 6 poults per treatment) was randomly selected and killed humanely by cervical dislocation. After necropsy, the small intestine was removed, and tissue samples from duodenum, jejunum, and ileum were taken for light and electron microscopic evaluation. The DFM birds showed increased goblet cell (GC) numbers, total GC area, GC mean size, mucosal thickness, and a greater number of segmented filamentous bacteria compared with controls. Changes in intestinal morphology as observed in this study support the concept that poultry gut health and function, and ultimately bird performance, can be improved by dietary supplementation with DFM products such as Primalac as used in this study.

Demonstration of the Dynamic Flowgraph Methodology using the Titan 2 Space Launch Vehicle Digital Flight Control System

NASA Technical Reports Server (NTRS)

Yau, M.; Guarro, S.; Apostolakis, G.

1993-01-01

Dynamic Flowgraph Methodology (DFM) is a new approach developed to integrate the modeling and analysis of the hardware and software components of an embedded system. The objective is to complement the traditional approaches which generally follow the philosophy of separating out the hardware and software portions of the assurance analysis. In this paper, the DFM approach is demonstrated using the Titan 2 Space Launch Vehicle Digital Flight Control System. The hardware and software portions of this embedded system are modeled in an integrated framework. In addition, the time dependent behavior and the switching logic can be captured by this DFM model. In the modeling process, it is found that constructing decision tables for software subroutines is very time consuming. A possible solution is suggested. This approach makes use of a well-known numerical method, the Newton-Raphson method, to solve the equations implemented in the subroutines in reverse. Convergence can be achieved in a few steps.

Predicting muscularity-related behavior, emotions, and cognitions in men: The role of psychological need thwarting, drive for muscularity, and mesomorphic internalization.

PubMed

Edwards, Christian; Tod, David; Molnar, Gyozo; Markland, David

2016-09-01

We examine the relationships that internalization, need thwarting (NT), and drive for muscularity (DFM), along with their interactions, had with weightlifting, muscle dissatisfaction (MD), and muscle-related-worry (MRW). A sample of 552 men (MAge=20.5 years, SD=3.1) completed the Psychological Need Thwarting Scale, the Internalization subscale of the male version of the Sociocultural Attitudes Towards Appearance Questionnaire, the Drive for Muscularity Scale-Attitudes subscale, the Male Body Attitudes Scale-Muscularity subscale, the Body Change Inventory-Worry subscale, and an inventory assessing weightlifting behavior. DFM significantly predicted weightlifting, MRW, and MD. Internalization significantly predicted weightlifting and MRW. NT significantly predicted weightlifting and MD, and its relationship with MRW approached significance. The interaction terms did not predict weightlifting or MRW. The NT/DFM and NT/Internalization interaction terms predicted MD. These results highlight the role of NT in predicting appearance variables in men. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluation of a direct-fed microbial product effect on the prevalence and load of Escherichia coli O157:H7 in feedlot cattle.

PubMed

Arthur, Terrance M; Bosilevac, Joseph M; Kalchayanand, Norasak; Wells, James E; Shackelford, Steven D; Wheeler, Tommy L; Koohmaraie, Mohammad

2010-02-01

Direct-fed microbials (DFM) have been identified as potential preharvest interventions for the reduction of foodborne bacterial pathogens such as Escherichia coli O157:H7. This study evaluated the efficacy of a DFM consisting of Bacillus subtilis strain 166 as an antimicrobial intervention strategy for the reduction of prevalence and load of E. coli O157:H7 in feces and on hides of feedlot cattle. Cattle (n = 526) were divided among 16 feedlot pens. Half of the pens received the DFM, and the other half did not. Hide and fecal samples were collected from each animal on days 28, 63, and 84 of the feeding trial. Over the course of the 84-day feeding period, there were no significant differences observed between treatments for either hide or fecal prevalence of E. coli O157:H7, or for the percentage of animals that were shedding E. coli O157:H7 at high levels (> or =200 CFU/g) in their feces or harboring E. coli O157:H7 at high levels (> or =40 CFU/cm(2)) on their hides. In addition, there was no significant difference between the average daily gains for the treated and control groups, with both groups averaging 1.3 kg/day. We concluded that the DFM tested would not be an effective preharvest intervention against E. coli O157:H7.

Development of a dust deposition forecast model for a mine tailings impoundment

NASA Astrophysics Data System (ADS)

Stovern, Michael

Wind erosion, transport and deposition of particulate matter can have significant impacts on the environment. It is observed that about 40% of the global land area and 30% of the earth's population lives in semiarid environments which are especially susceptible to wind erosion and airborne transport of contaminants. With the increased desertification caused by land use changes, anthropogenic activities and projected climate change impacts windblown dust will likely become more significant. An important anthropogenic source of windblown dust in this region is associated with mining operations including tailings impoundments. Tailings are especially susceptible to erosion due to their fine grain composition, lack of vegetative coverage and high height compared to the surrounding topography. This study is focused on emissions, dispersion and deposition of windblown dust from the Iron King mine tailings in Dewey-Humboldt, Arizona, a Superfund site. The tailings impoundment is heavily contaminated with lead and arsenic and is located directly adjacent to the town of Dewey-Humboldt. The study includes in situ field measurements, computational fluid dynamic modeling and the development of a windblown dust deposition forecasting model that predicts deposition patterns of dust originating from the tailings impoundment. Two instrumented eddy flux towers were setup on the tailings impoundment to monitor the aeolian and meteorological conditions. The in situ observations were used in conjunction with a computational fluid dynamic (CFD) model to simulate the transport of windblown dust from the mine tailings to the surrounding region. The CFD model simulations include gaseous plume dispersion to simulate the transport of the fine aerosols, while individual particle transport was used to track the trajectories of larger particles and to monitor their deposition locations. The CFD simulations were used to estimate deposition of tailings dust and identify topographic mechanisms that influence deposition. Simulation results indicated that particles preferentially deposit in regions of topographic upslope. In addition, turbulent wind fields enhanced deposition in the wake region downwind of the tailings. This study also describes a deposition forecasting model (DFM) that can be used to forecast the transport and deposition of windblown dust originating from a mine tailings impoundment. The DFM uses in situ observations from the tailings and theoretical simulations of aerosol transport to parameterize the model. The model was verified through the use of inverted-disc deposition samplers. The deposition forecasting model was initialized using data from an operational Weather Research and Forecasting (WRF) model and the forecast deposition patterns were compared to the inverted-disc samples through gravimetric, chemical composition and lead isotopic analysis. The DFM was verified over several month-long observing periods by comparing transects of arsenic and lead tracers measured by the samplers to the DFM PM27 forecast. Results from the sampling periods indicated that the DFM was able to accurately capture the regional deposition patterns of the tailings dust up to 1 km. Lead isotopes were used for source apportionment and showed spatial patterns consistent with the DFM and the observed weather conditions. By providing reasonably accurate estimates of contaminant deposition rates, the DFM can improve the assessment of human health impacts caused by windblown dust from the Iron King tailings impoundment.

Reduced Burden of Salmonella enterica in Bovine Subiliac Lymph Nodes Associated with Administration of a Direct-fed Microbial.

PubMed

Vipham, J L; Loneragan, G H; Guillen, L M; Brooks, J C; Johnson, B J; Pond, A; Pond, N; Brashears, M M

2015-12-01

Despite effective food safety interventions within abattoirs, Salmonella enterica remains a common contaminant of raw ground beef. Research has recently implicated peripheral lymph nodes (PLNs) as a potential route by which Salmonella contaminates ground beef. This study examined the efficacy of using Lactobacillus animalis (formerly designated Lactobacillus acidophilus; NP51) and Propionibacterium freudenreichii (NP24), at 10(9) cfu/head/day, as a direct-fed microbial (DFM) in feedlot cattle diets to control Salmonella within PLNs. Two studies were conducted in which cattle were randomly allocated into either control or DFM treatment groups. Diets of treated cattle were supplemented with 10(9) cfu/head/day of the DFM, while control groups received no DFM supplementation. During slaughter at abattoirs, one subiliac lymph node (SLN) per carcass was collected from 627 carcasses from one study and 99 carcasses from the second study. Lymph nodes were cultured to estimate the presence and concentration of Salmonella. In the first study, effects of DFM supplementation varied across slaughter days. On the first and second slaughter days, prevalence was reduced by 50% (P = 0.0072) and 31% (P = 0.0093), respectively. No significant difference was observed on slaughter day three (P = 0.1766). In the second study, Salmonella was 82% less likely (P = 0.008) to be recovered from SLNs of treatment cattle. While a greater relative risk reduction was observed in the latter study, absolute risk reductions were similar across studies. A significant reduction in the concentration of Salmonella in SLNs (P < 0.0001) on a cfu/g and cfu/node basis was also observed in cattle administered NP51 and NP24 in the first study; in the second study, too few quantifiable SLNs were observed to facilitate meaningful comparisons. The results indicate that NP51 and NP24 supplementation may aid in reducing the prevalence and concentration of Salmonella in SLNs and, therefore, serve as an effective control measure to reduce Salmonella in ground beef products. © 2015 Blackwell Verlag GmbH.

Effects of bacterial direct-fed microbials on ruminal fermentation, blood variables, and the microbial populations of feedlot cattle.

PubMed

Ghorbani, G R; Morgavi, D P; Beauchemin, K A; Leedle, J A Z

2002-07-01

A study was conducted to determine whether bacterial direct-fed microbials (DFM) could be used to minimize the risk of acidosis in feedlot cattle receiving high concentrate diets. Six ruminally cannulated steers, previously adapted to a high concentrate diet, were used in a double 3 x 3 Latin square to study the effects of DFM on feed intake, ruminal pH, and ruminal and blood characteristics. Steers were provided ad libitum access to a diet containing steam-rolled barley, barley silage, and a protein-mineral supplement at 87, 9, and 4% (DM basis), respectively. Treatments were as follows: control, Propionibacterium P15 (P15), and Propionibacterium P15 and Enterococcus faecium EF212 (PE). The bacterial treatments (10(9) cfu/g) plus whey powder carrier, or whey powder alone for control, were top-dressed once daily at the time of feeding (10 g/[steer/d]). Periods consisted of 2 wk of adaptation and 1 wk of measurements. Ruminal pH was continuously measured for 6 d using indwelling electrodes. Dry matter intake and ruminal pH (mean, minimum, hours, and area pH < 5.8 or < 5.5) were not affected by treatment (P > 0.05). However, supplementation with P15 increased protozoal numbers (P < 0.05) with a concomitant increase in ruminal NH3 concentration (P < 0.01) and a decrease in the number of amylolytic bacteria (P < 0.05) compared with the control. Streptococcus bovis, enumerated using a selective medium, was numerically reduced with supplementation of PE. Although blood pH and blood glucose were not affected by DFM supplementation, steers fed PE had numerically lower concentrations of blood CO2 than control steers, which is consistent with a reduced risk of metabolic acidosis. Although the bacterial DFM used in this study did not induce changes in DMI or ruminal and blood pH, some rumen and blood variables indicated that the bacterial DFM used in this study may decrease the risk of acidosis in feedlot cattle.

Effects of bacterial direct-fed microbials on ruminal characteristics, methane emission, and milk fatty acid composition in cows fed high- or low-starch diets.

PubMed

Philippeau, C; Lettat, A; Martin, C; Silberberg, M; Morgavi, D P; Ferlay, A; Berger, C; Nozière, P

2017-04-01

This study investigated the effects of bacterial direct-fed microbials (DFM) on ruminal fermentation and microbial characteristics, methane (CH 4 ) emission, diet digestibility, and milk fatty acid (FA) composition in dairy cows fed diets formulated to induce different ruminal volatile fatty acid (VFA) profiles. Eight ruminally cannulated dairy cows were divided into 2 groups based on parity, days in milk, milk production, and body weight. Cows in each group were fed either a high-starch (38%, HS) or a low-starch (2%, LS) diet in a 55:45 forage-to-concentrate ratio on a dry matter (DM) basis. For each diet, cows were randomly assigned to 1 of 4 treatments in a Latin square design of (1) control (CON); (2) Propionibacterium P63 (P63); (3) P63 plus Lactobacillus plantarum 115 (P63+Lp); (4) P63 plus Lactobacillus rhamnosus 32 (P63+Lr). Strains of DFM were administered at 10 10 cfu/d. Methane emission (using the sulfur hexafluoride tracer technique), total-tract digestibility, dry matter intake, and milk production and composition were quantified in wk 3. Ruminal fermentation and microbial characteristics were measured in wk 4. Data were analyzed using the mixed procedure of SAS (SAS Institute Inc., Cary, NC). The 2 diets induced different ruminal VFA profiles, with a greater proportion of propionate at the expense of acetate and butyrate for the HS diet. Greater concentrations of total bacteria and selected bacterial species of methanogenic Archaea were reported for the HS diet, whereas the protozoa concentration in HS decreased. For both diets, bacterial DFM supplementation raised ruminal pH (+0.18 pH units, on average) compared with CON. Irrespective of diet, P63+Lp and P63+Lr increased ruminal cellulase activity (3.8-fold, on average) compared with CON, but this effect was not associated with variations in ruminal microbial numbers. Irrespective of diet, no effect of bacterial DFM on ruminal VFA was observed. For the LS diet, supplementing cows with P63+Lr tended to decrease CH 4 emission (26.5%, on average, when expressed per kilogram of milk or 4% fat-corrected milk). Only P63 supplementation to cows fed the HS diet affected the concentration of some milk FA, such as cis isomers of 18:1 and intermediates of ruminal biohydrogenation of polyunsaturated FA. Overall, bacterial DFM could be useful to stabilize ruminal pH. Their effects on CH 4 production mitigation and milk FA profile depended on DFM strain and diet and should be confirmed under a greater variation of dietary conditions. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Effect of Direct-Fed Microbial Dosage on the Fecal Concentrations of Enterohemorrhagic Escherichia coli in Feedlot Cattle.

PubMed

Luedtke, Brandon E; Bosilevac, Joseph M; Harhay, Dayna M; Arthur, Terrance M

2016-04-01

Contamination of beef products by Shiga toxin-producing Escherichia coli is a concern for food safety with a particular subset, the enterohemorrhagic E. coli (EHEC), being the most relevant to human disease. To mitigate food safety risks, preharvest intervention strategies have been implemented with the aim to reduce EHEC in cattle. One class of interventions that has been widely used in feedlots is direct-fed microbials (DFMs), which can contain various dosing rates of probiotic bacteria. Here we compare the use of two different doses of a commercially available DFM on total EHEC load in a commercial feedlot setting. The DFMs used were the standard 10(9) Propionibacterium freudenreichii and 10(6) Lactobacillus acidophilus colony forming units (CFUs)/head/day dose of Bovamine(®) (Nutrition Physiology Company, Guymon, OK) and the higher dose, Bovamine Defend™ (Nutrition Physiology Company), which is dosed at 10(9) P. freudenreichii and 10(9) Lactobacillus acidophilus CFUs/head/day. To analyze the total EHEC fecal concentration, 2200 head of cattle were assigned a DFM feed regimen lasting approximately 5 months. At harvest, 480 head of cattle were sampled using rectoanal mucosal swabs. A quantitative polymerase chain reaction assay targeting ecf1 was used to enumerate the total EHEC fecal concentration for 240 head fed the low-dose DFM and 240 head fed the high-dose DFM. No significant difference (p > 0.05) in the fecal concentration of total EHEC was observed between the two doses. This suggests that using an increased dosage provides no additional reduction in the total EHEC fecal concentration of feedlot cattle compared to the standard dosage.

Effects of added chelated trace minerals, organic selenium, yeast culture, direct-fed microbials, and Yucca schidigera extract in horses: II. Nutrient excretion and potential environmental impact.

PubMed

Gordon, M E; Edwards, M S; Sweeney, C R; Jerina, M L

2013-08-01

The objective of this study was to test the hypothesis that an equine diet formulated with chelated trace minerals, organic selenium, yeast culture, direct-fed microbials (DFM) and Yucca schidigera extract would decrease excretion of nutrients that have potential for environmental impact. Horses were acclimated to 100% pelleted diets formulated with (ADD) and without (CTRL) the aforementioned additives. Chelated sources of Cu, Zn, Mn, and Co were included in the ADD diet at a 100% replacement rate of sulfate forms used in the CTRL diet. Additionally, the ADD diet included organic selenium yeast, DFM, and Yucca schidigera extract. Ten horses were fed the 2 experimental diets during two 42-d periods in a crossover design. Total fecal and urine collection occurred during the last 14 d of each period. Results indicate no significant differences between Cu, Zn, Mn, and Co concentrations excreted via urine (P > 0.05) due to dietary treatment. There was no difference between fecal Cu and Mn concentrations (P > 0.05) based on diet consumed. Mean fecal Zn and Co concentrations excreted by horses consuming ADD were greater than CTRL (P < 0.003). Differences due to diet were found for selenium fecal (P < 0.0001) and urine (P < 0.0001) excretions, with decreased concentrations found for horses consuming organic selenium yeast (ADD). In contrast, fecal K (%) was greater (P = 0.0421) for horses consuming ADD, whereas concentrations of fecal solids, total N, ammonia N, P, total ammonia, and fecal output did not differ between dietary treatments (P > 0.05). In feces stockpiled to simulate a crude composting method, no differences (P > 0.05) due to diet were detected for particle size, temperature, moisture, OM, total N, P, phosphate, K, moisture, potash, or ammonia N (P > 0.05). Although no difference (P = 0.2737) in feces stockpile temperature due to diet was found, temperature differences over time were documented (P < 0.0001). In conclusion, the addition of certain chelated mineral sources, organic Se yeast, DFM, and Yucca schidigera extract did not decrease most nutrient concentrations excreted. Horses consuming organic selenium as part of the additive diet had lower fecal and urine Se concentrations, as well as greater fecal K concentrations.

Windblown Dust Deposition Forecasting and Spread of Contamination around Mine Tailings.

PubMed

Stovern, Michael; Guzmán, Héctor; Rine, Kyle P; Felix, Omar; King, Matthew; Ela, Wendell P; Betterton, Eric A; Sáez, Avelino Eduardo

2016-02-01

Wind erosion, transport and deposition of windblown dust from anthropogenic sources, such as mine tailings impoundments, can have significant effects on the surrounding environment. The lack of vegetation and the vertical protrusion of the mine tailings above the neighboring terrain make the tailings susceptible to wind erosion. Modeling the erosion, transport and deposition of particulate matter from mine tailings is a challenge for many reasons, including heterogeneity of the soil surface, vegetative canopy coverage, dynamic meteorological conditions and topographic influences. In this work, a previously developed Deposition Forecasting Model (DFM) that is specifically designed to model the transport of particulate matter from mine tailings impoundments is verified using dust collection and topsoil measurements. The DFM is initialized using data from an operational Weather Research and Forecasting (WRF) model. The forecast deposition patterns are compared to dust collected by inverted-disc samplers and determined through gravimetric, chemical composition and lead isotopic analysis. The DFM is capable of predicting dust deposition patterns from the tailings impoundment to the surrounding area. The methodology and approach employed in this work can be generalized to other contaminated sites from which dust transport to the local environment can be assessed as a potential route for human exposure.

Windblown Dust Deposition Forecasting and Spread of Contamination around Mine Tailings

PubMed Central

Stovern, Michael; Guzmán, Héctor; Rine, Kyle P.; Felix, Omar; King, Matthew; Ela, Wendell P.; Betterton, Eric A.; Sáez, Avelino Eduardo

2017-01-01

Wind erosion, transport and deposition of windblown dust from anthropogenic sources, such as mine tailings impoundments, can have significant effects on the surrounding environment. The lack of vegetation and the vertical protrusion of the mine tailings above the neighboring terrain make the tailings susceptible to wind erosion. Modeling the erosion, transport and deposition of particulate matter from mine tailings is a challenge for many reasons, including heterogeneity of the soil surface, vegetative canopy coverage, dynamic meteorological conditions and topographic influences. In this work, a previously developed Deposition Forecasting Model (DFM) that is specifically designed to model the transport of particulate matter from mine tailings impoundments is verified using dust collection and topsoil measurements. The DFM is initialized using data from an operational Weather Research and Forecasting (WRF) model. The forecast deposition patterns are compared to dust collected by inverted-disc samplers and determined through gravimetric, chemical composition and lead isotopic analysis. The DFM is capable of predicting dust deposition patterns from the tailings impoundment to the surrounding area. The methodology and approach employed in this work can be generalized to other contaminated sites from which dust transport to the local environment can be assessed as a potential route for human exposure. PMID:29082035

Escherichia coli O26 in feedlot cattle: fecal prevalence, isolation, characterization, and effects of an E. coli O157 vaccine and a direct-fed microbial.

PubMed

Paddock, Zac D; Renter, David G; Cull, Charley A; Shi, Xiarong; Bai, Jianfa; Nagaraja, Tiruvoor G

2014-03-01

Escherichia coli O26 is second only to O157 in causing foodborne, Shiga toxin-producing E. coli (STEC) infections. Our objectives were to determine fecal prevalence and characteristics of E. coli O26 in commercial feedlot cattle (17,148) that were enrolled in a study to evaluate an E. coli O157:H7 siderophore receptor and porin (SRP(®)) vaccine (VAC) and a direct-fed microbial (DFM; 10(6) colony-forming units [CFU]/animal/day of Lactobacillus acidophilus and 10(9) CFU/animal/day of Propionibacterium freudenreichii). Cattle were randomly allocated to 40 pens within 10 complete blocks; pens were randomly assigned to control, VAC, DFM, or VAC+DFM treatments. Vaccine was administered on days 0 and 21, and DFM was fed throughout the study. Pen-floor fecal samples (30/pen) were collected weekly for the last 4 study weeks. Samples were enriched in E. coli broth and subjected to a multiplex polymerase chain reaction (PCR) designed to detect O26-specific wzx gene and four major virulence genes (stx1, stx2, eae, and ehxA) and to a culture-based procedure that involved immunomagnetic separation and plating on MacConkey agar. Ten presumptive E. coli colonies were randomly picked, pooled, and tested by the multiplex PCR. Pooled colonies positive for O26 serogroup were streaked on sorbose MacConkey agar, and 10 randomly picked colonies per sample were tested individually by the multiplex PCR. The overall prevalence of E. coli O26 was higher (p<0.001) by the culture-based method compared to the PCR assay (22.7 versus 10.5%). The interventions (VAC and or DFM) had no impact on fecal shedding of O26. Serogroup O26 was recovered in pure culture from 23.9% (260 of 1089) of O26 PCR-positive pooled colonies. Only 7 of the 260 isolates were positive for the stx gene and 90.1% of the isolates possessed an eaeβ gene that codes for intimin subtype β, but not the bfpA gene, which codes for bundle-forming pilus. Therefore, the majority of the O26 recovered from feedlot cattle feces was atypical enteropathogenic E. coli, and not STEC.

GLOFRIM v1.0 - A globally applicable computational framework for integrated hydrological-hydrodynamic modelling

NASA Astrophysics Data System (ADS)

Hoch, Jannis M.; Neal, Jeffrey C.; Baart, Fedor; van Beek, Rens; Winsemius, Hessel C.; Bates, Paul D.; Bierkens, Marc F. P.

2017-10-01

We here present GLOFRIM, a globally applicable computational framework for integrated hydrological-hydrodynamic modelling. GLOFRIM facilitates spatially explicit coupling of hydrodynamic and hydrologic models and caters for an ensemble of models to be coupled. It currently encompasses the global hydrological model PCR-GLOBWB as well as the hydrodynamic models Delft3D Flexible Mesh (DFM; solving the full shallow-water equations and allowing for spatially flexible meshing) and LISFLOOD-FP (LFP; solving the local inertia equations and running on regular grids). The main advantages of the framework are its open and free access, its global applicability, its versatility, and its extensibility with other hydrological or hydrodynamic models. Before applying GLOFRIM to an actual test case, we benchmarked both DFM and LFP for a synthetic test case. Results show that for sub-critical flow conditions, discharge response to the same input signal is near-identical for both models, which agrees with previous studies. We subsequently applied the framework to the Amazon River basin to not only test the framework thoroughly, but also to perform a first-ever benchmark of flexible and regular grids on a large-scale. Both DFM and LFP produce comparable results in terms of simulated discharge with LFP exhibiting slightly higher accuracy as expressed by a Kling-Gupta efficiency of 0.82 compared to 0.76 for DFM. However, benchmarking inundation extent between DFM and LFP over the entire study area, a critical success index of 0.46 was obtained, indicating that the models disagree as often as they agree. Differences between models in both simulated discharge and inundation extent are to a large extent attributable to the gridding techniques employed. In fact, the results show that both the numerical scheme of the inundation model and the gridding technique can contribute to deviations in simulated inundation extent as we control for model forcing and boundary conditions. This study shows that the presented computational framework is robust and widely applicable. GLOFRIM is designed as open access and easily extendable, and thus we hope that other large-scale hydrological and hydrodynamic models will be added. Eventually, more locally relevant processes would be captured and more robust model inter-comparison, benchmarking, and ensemble simulations of flood hazard on a large scale would be allowed for.

Variable efficacy of a vaccine and direct-fed microbial for controlling Escherichia coli O157:H7 in feces and on hides of feedlot cattle.

PubMed

Stanford, Kim; Hannon, Sherry; Booker, Calvin W; Jim, G Kee

2014-05-01

To evaluate the efficacy of a type-III secreted proteins vaccine and a Lactobacillus-acidophilus-based direct-fed microbial (DFM) for controlling Escherichia coli O157:H7, cattle (n=864) were allocated to the following groups: DFM, finishing diets containing 10(9) colony-forming units (CFU)/animal/day L. acidophilus and Propionibacterium freudenreichii; VAC, finishing diets and 2 mL intramuscular injection of vaccine at allocation and 28 days later; or CON, finishing diets only. Cattle within replicates were stratified by initial levels of E. coli O157:H7 and randomized to experimental groups, with 30 pens allocated on June 15, 2011 (AS1), 18 pens allocated on June 28, 2011 (AS2), and 18 cattle per pen. Rectal fecal samples and perineal swabs were collected at 28-day intervals until shipment to slaughter (103-145 days on trial). Numbers of cattle with enumerable E. coli O157:H7 (≥1.6 CFU/g feces) were reduced in AS1 and AS2 by VAC (p=0.008), although interventions had no impact on numbers of E. coli O157:H7 shed. For AS1, VAC reduced prevalence of E. coli O157:H7 in feces (p=0.03) and perineal swabs (p=0.04) in the feeding period but not at shipment to slaughter. For AS2, prevalence of E. coli O157:H7 was not reduced in either feces or perineal swabs by VAC at any time. For AS1, DFM reduced prevalence of E. coli O157:H7 in perineal swabs (p=0.01) during the feeding period. For AS2, DFM increased E. coli O157:H7 detection in feces (p=0.03) and perineal swabs (p=0.01) at shipment to slaughter. Seventy-five percent of AS1 E. coli O157:H7 isolates had only stx1, while 87% of AS2 isolates had stx1 and stx2 genes. Of the two interventions, VAC shows the most potential for pre-harvest control of E. coli O157:H7, but due to variable efficacy of both DFM and VAC, additional product development is necessary to ensure more consistent pre-harvest control of E. coli O157:H7.

Efficacy of a vaccine and a direct-fed microbial against fecal shedding of Escherichia coli O157:H7 in a randomized pen-level field trial of commercial feedlot cattle.

PubMed

Cull, Charley A; Paddock, Zachary D; Nagaraja, T G; Bello, Nora M; Babcock, Abram H; Renter, David G

2012-09-21

Our primary objective was to determine the efficacy of a siderophore receptor and porin proteins-based vaccine (VAC) and a Lactobacillus acidophilus-based direct-fed microbial (DFM) against fecal shedding of Escherichia coli O157:H7 in commercial feedlot cattle fed a corn grain-based diet with 25% distiller's grains. Cattle projected to be on a finishing diet during the summer were randomly allocated into 40 study pens within ten blocks based on allocation dates. Blocks were complete; each of the four pens within a block was randomly assigned one treatment: control, VAC, DFM, or VAC+DFM. The DFM was fed (10⁶CFU/animal/day of Lactobacillus) throughout the study periods (84-88 days) and cattle were vaccinated at enrollment and again three weeks later. Fresh fecal samples (30/pen) from pen floors were collected weekly for four consecutive weeks (study days 52-77). Two concurrent culture procedures were used to enable estimates of E. coli O157:H7 shedding prevalence and prevalence of high shedders. From 4800 total samples, 1522 (31.7%) were positive for E. coli O157:H7 and 169 (3.5%) were considered high shedders. Pen-level linear mixed models were used for data analyses. There were no significant interactions among treatments and time of sampling. However, vaccinated pens had lower (P<0.01) overall prevalence of E. coli O157:H7 (model-adjusted mean ± SEM=17.4 ± 3.95%) and lower (P<0.01) prevalence of high shedders (0.95 ± 0.26%) than unvaccinated pens (37.0 ± 6.32% and 4.19 ± 0.81%, respectively). There was no evidence of a DFM effect on either measure of E. coli O157:H7 shedding. Results indicate that a two-dose regimen of the vaccine significantly reduces fecal prevalence of E. coli O157:H7 (vaccine efficacy of 53.0%) and prevalence of E. coli O157:H7 high shedders (vaccine efficacy of 77.3%) in commercial feedlot cattle reared in the summer on a finishing diet with 25% distiller's grains. Copyright © 2012 Elsevier Ltd. All rights reserved.

WinTICS-24 --- A Telescope Control Interface for MS Windows

NASA Astrophysics Data System (ADS)

Hawkins, R. Lee

1995-12-01

WinTICS-24 is a telescope control system interface and observing assistant written in Visual Basic for MS Windows. It provides the ability to control a telescope and up to 3 other instruments via the serial ports on an IBM-PC compatible computer, all from one consistent user interface. In addition to telescope control, WinTICS contains an observing logbook, trouble log (which can automatically email its entries to a responsible person), lunar phase display, object database (which allows the observer to type in the name of an object and automatically slew to it), a time of minimum calculator for eclipsing binary stars, and an interface to the Guide CD-ROM for bringing up finder charts of the current telescope coordinates. Currently WinTICS supports control of DFM telescopes, but is easily adaptable to other telescopes and instrumentation.

Dark field microscopic analysis of discrete Au nanostructures: Understanding the correlation of scattering with stoichiometry

NASA Astrophysics Data System (ADS)

Wang, Guoqing; Bu, Tong; Zako, Tamotsu; Watanabe-Tamaki, Ryoko; Tanaka, Takuo; Maeda, Mizuo

2017-09-01

Due to the potential of gold nanoparticle (AuNP)-based trace analysis, the discrimination of small AuNP clusters with different assembling stoichiometry is a subject of fundamental and technological importance. Here we prepare oligomerized AuNPs with controlled stoichiometry through DNA-directed assembly, and demonstrate that AuNP monomers, dimers and trimers can be clearly distinguished using dark field microscopy (DFM). The scattering intensity for of AuNP structures with stoichiometry ranging from 1 to 3 agrees well with our theoretical calculations. This study demonstrates the potential of utilizing the DFM approach in ultra-sensitive detection as well as the use of DNA-directed assembly for plasmonic nano-architectures.

[Binocular functions in amblyopia and strabismus].

PubMed

Awaya, S; Sato, M; Tsuzuki, K; Takara, T; Hiraiwa, S; Ota, K; Arai, M; Yoshida, M; Miyake, Y; Terasaki, H; Horiguchi, M; Hirano, K; Hirose, H; Uno, Y; Suzuki, Y; Iwata, M; Takai, Y; Maeda, M; Hisano, S; Kawakita, T; Omura, T; Ota, Y; Kondo, N; Takashi, A; Kawakami, O

1997-12-01

Regarding the changing trends in the concept, definition, etiological classification, and criteria for diagnosis of amblyopia, we reviewed a total of 4,693 cases of amblyopia seen during the past 37 years. The amblyopia was divided into four types: strabismic, anisometropic, ametropic, and form vision deprivative. There was a definite trend for the incidence to decrease and for the diagnosis to be made during earlier age in recent years. Although favorable recovery of visual acuity is obtained after treatment of amblyopia and strabismus, there are difficulties in obtaining good binocular functions in early-onset amblyopia and strabismus. This feature was evaluated in regard to motion perception asymmetry (MPA) and binocular depth from motion (DFM). Many cases of early-onset amblyopia and strabismus showed no disparity stereopsis, or position stereopsis, in spite of the presence of DFM. The MPA appeared to be closely related to early-onset esotropia regardless of age, while it disappeared and motion perception became symmetric 4 to 5 months after birth in normal infants. The DFM seemed to play an important role in maintaining good motor alignment for several years after surgery. I developed a checkerboard pattern stimulator in 1978. This method proved to be useful in developing binocular functions and motor alignment by applying simultaneous bifoveolar stimulation and anti-suppression. Extensive exposure to the stimulation was essential for therapeutic success.

Visualizing dopamine released from living cells using a nanoplasmonic probe

NASA Astrophysics Data System (ADS)

Qin, W. W.; Wang, S. P.; Li, J.; Peng, T. H.; Xu, Y.; Wang, K.; Shi, J. Y.; Fan, C. H.; Li, D.

2015-09-01

We report the development of an ultrasensitive nanoplasmonic probe for discriminative detection and imaging of dopamine released from living cells. The sensing mechanism is based on the dopamine-induced seeded-growth of Au nanoparticles (Au NPs) that leads to the shift of the plasmon band. This platform allows for the detection of dopamine with a detection limit down to 0.25 pM within 1 min. This nanoplasmonic assay is further applied to visualize the release of dopamine from living rat pheochromocytoma (PC12) cells under ATP-stimulation with dark-field microscopy (DFM). The DFM results together with real time fluorescence imaging of PC12 cells stained with the Fluo calcium indicator, suggested that ATP stimulated-release of dopamine is concomitant with the Ca2+ influx, and the influx of Ca2+ is through ATP-activated channels instead of the voltage-gated Ca2+ channel (VGC).We report the development of an ultrasensitive nanoplasmonic probe for discriminative detection and imaging of dopamine released from living cells. The sensing mechanism is based on the dopamine-induced seeded-growth of Au nanoparticles (Au NPs) that leads to the shift of the plasmon band. This platform allows for the detection of dopamine with a detection limit down to 0.25 pM within 1 min. This nanoplasmonic assay is further applied to visualize the release of dopamine from living rat pheochromocytoma (PC12) cells under ATP-stimulation with dark-field microscopy (DFM). The DFM results together with real time fluorescence imaging of PC12 cells stained with the Fluo calcium indicator, suggested that ATP stimulated-release of dopamine is concomitant with the Ca2+ influx, and the influx of Ca2+ is through ATP-activated channels instead of the voltage-gated Ca2+ channel (VGC). Electronic supplementary information (ESI) available: Fig. S1-S4 and Table S1. See DOI: 10.1039/c5nr04433b

Discrete fracture modeling of multiphase flow and hydrocarbon production in fractured shale or low permeability reservoirs

NASA Astrophysics Data System (ADS)

Hao, Y.; Settgast, R. R.; Fu, P.; Tompson, A. F. B.; Morris, J.; Ryerson, F. J.

2016-12-01

It has long been recognized that multiphase flow and transport in fractured porous media is very important for various subsurface applications. Hydrocarbon fluid flow and production from hydraulically fractured shale reservoirs is an important and complicated example of multiphase flow in fractured formations. The combination of horizontal drilling and hydraulic fracturing is able to create extensive fracture networks in low permeability shale rocks, leading to increased formation permeability and enhanced hydrocarbon production. However, unconventional wells experience a much faster production decline than conventional hydrocarbon recovery. Maintaining sustainable and economically viable shale gas/oil production requires additional wells and re-fracturing. Excessive fracturing fluid loss during hydraulic fracturing operations may also drive up operation costs and raise potential environmental concerns. Understanding and modeling processes that contribute to decreasing productivity and fracturing fluid loss represent a critical component for unconventional hydrocarbon recovery analysis. Towards this effort we develop a discrete fracture model (DFM) in GEOS (LLNL multi-physics computational code) to simulate multiphase flow and transfer in hydraulically fractured reservoirs. The DFM model is able to explicitly account for both individual fractures and their surrounding rocks, therefore allowing for an accurate prediction of impacts of fracture-matrix interactions on hydrocarbon production. We apply the DFM model to simulate three-phase (water, oil, and gas) flow behaviors in fractured shale rocks as a result of different hydraulic stimulation scenarios. Numerical results show that multiphase flow behaviors at the fracture-matrix interface play a major role in controlling both hydrocarbon production and fracturing fluid recovery rates. The DFM model developed in this study will be coupled with the existing hydro-fracture model to provide a fully integrated geomechanical and reservoir simulation capability for an accurate prediction and assessment of hydrocarbon production and hydraulic fracturing performance. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Quantifying electrical impacts on redundant wire insertion in 7nm unidirectional designs

NASA Astrophysics Data System (ADS)

Mohyeldin, Ahmed; Schroeder, Uwe Paul; Srinivasan, Ramya; Narisetty, Haritez; Malik, Shobhit; Madhavan, Sriram

2017-04-01

In nano-meter scale Integrated Circuits, via fails due to random defects is a well-known yield detractor, and via redundancy insertion is a common method to help enhance semiconductors yield. For the case of Self Aligned Double Patterning (SADP), which might require unidirectional design layers as in the case of some advanced technology nodes, the conventional methods of inserting redundant vias don't work any longer. This is because adding redundant vias conventionally requires adding metal shapes in the non-preferred direction, which will violate the SADP design constraints in that case. Therefore, such metal layers fabricated using unidirectional SADP require an alternative method for providing the needed redundancy. This paper proposes a post-layout Design for Manufacturability (DFM) redundancy insertion method tailored for the design requirements introduced by unidirectional metal layers. The proposed method adds redundant wires in the preferred direction - after searching for nearby vacant routing tracks - in order to provide redundant paths for electrical signals. This method opportunistically adds robustness against failures due to silicon defects without impacting area or incurring new design rule violations. Implementation details of this redundancy insertion method will be explained in this paper. One known challenge with similar DFM layout fixing methods is the possible introduction of undesired electrical impact, causing other unintentional failures in design functionality. In this paper, a study is presented to quantify the electrical impacts of such redundancy insertion scheme and to examine if that electrical impact can be tolerated. The paper will show results to evaluate DFM insertion rates and corresponding electrical impact for a given design utilization and maximum inserted wire length. Parasitic extraction and static timing analysis results will be presented. A typical digital design implemented using GLOBALFOUNDRIES 7nm technology is used for demonstration. The provided results can help evaluate such extensive DFM insertion method from an electrical standpoint. Furthermore, the results could provide guidance on how to implement the proposed method of adding electrical redundancy such that intolerable electrical impacts could be avoided.

Repulsive nature of optical potentials for high-energy heavy-ion scattering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Furumoto, T.; Sakuragi, Y.; Yamamoto, Y.

2010-10-15

The recent works by the present authors predicted that the real part of heavy-ion optical potentials changes its character from attraction to repulsion around the incident energy per nucleon E/A=200-300 MeV on the basis of the complex G-matrix interaction and the double-folding model (DFM) and revealed that the three-body force plays an important role there. In the present paper, we have precisely analyzed the energy dependence of the calculated DFM potentials and its relation to the elastic-scattering angular distributions in detail in the case of the {sup 12}C+{sup 12}C system in the energy range of E/A=100-400 MeV. The tensor forcemore » contributes substantially to the energy dependence of the real part of the DFM potentials and plays an important role to lower the attractive-to-repulsive transition energy. The nearside and farside (N/F) decompositions of the elastic-scattering amplitudes clarify the close relation between the attractive-to-repulsive transition of the potentials and the characteristic evolution of the calculated angular distributions with the increase of the incident energy. Based on the present analysis, we propose experimental measurements for the predicted strong diffraction phenomena of the elastic-scattering angular distribution caused by the N/F interference around the attractive-to-repulsive transition energy together with the reduced diffractions below and above the transition energy.« less

Modelling of high-frequency structure-borne sound transmission on FEM grids using the Discrete Flow Mapping technique

NASA Astrophysics Data System (ADS)

Hartmann, Timo; Tanner, Gregor; Xie, Gang; Chappell, David; Bajars, Janis

2016-09-01

Dynamical Energy Analysis (DEA) combined with the Discrete Flow Mapping technique (DFM) has recently been introduced as a mesh-based high frequency method modelling structure borne sound for complex built-up structures. This has proven to enhance vibro-acoustic simulations considerably by making it possible to work directly on existing finite element meshes circumventing time-consuming and costly re-modelling strategies. In addition, DFM provides detailed spatial information about the vibrational energy distribution within a complex structure in the mid-to-high frequency range. We will present here progress in the development of the DEA method towards handling complex FEM-meshes including Rigid Body Elements. In addition, structure borne transmission paths due to spot welds are considered. We will present applications for a car floor structure.

An Observation of Diamond-Shaped Particle Structure in a Soya Phosphatidylcohline and Bacteriorhodopsin Composite Langmuir Blodgett Film Fabricated by Multilayer Molecular Thin Film Method

NASA Astrophysics Data System (ADS)

Tsujiuchi, Y.; Makino, Y.

A composite film of soya phosphatidylcohline (soya PC) and bacteriorhodopsin (BR) was fabricated by the multilayer molecular thin film method using fatty acid and lipid on a quartz substrate. Direct Force Microscopy (DFM), UV absorption spectra and IR absorption spectra of the film were characterized on the detail of surface structure of the film. The DFM data revealed that many rhombus (diamond-shaped) particles were observed in the film. The spectroscopic data exhibited the yield of M-intermediate of BR in the film. On our modelling of molecular configuration indicate that the coexistence of the strong inter-molecular interaction and the strong inter-molecular interaction between BR trimmers attributed to form the particles.

THz-wave generation via difference frequency mixing in strained silicon based waveguide utilizing its second order susceptibility χ((2)).

PubMed

Saito, Kyosuke; Tanabe, Tadao; Oyama, Yutaka

2014-07-14

Terahertz (THz) wave generation via difference frequency mixing (DFM) process in strain silicon membrane waveguides by introducing the straining layer is theoretically investigated. The Si(3)N(4) straining layer induces anisotropic compressive strain in the silicon core and results in the appearance of the bulk second order nonlinear susceptibility χ((2)) by breaking the crystal symmetry. We have proposed waveguide structures for THz wave generation under the DFM process by .using the modal birefringence in the waveguide core. Our simulations show that an output power of up to 0.95 mW can be achieved at 9.09 THz. The strained silicon optical device may open a widow in the field of the silicon-based active THz photonic device applications.

Effects of live cultures of Lactobacillus acidophilus (strains NP45 and NP51) and Propionibacterium freudenreichii on performance, carcass, and intestinal characteristics, and Escherichia coli strain O157 shedding of finishing beef steers.

PubMed

Elam, N A; Gleghorn, J F; Rivera, J D; Galyean, M L; Defoor, P J; Brashears, M M; Younts-Dahl, S M

2003-11-01

In Exp. 1, 240 beef steers (initial BW = 332.8 kg) were used to determine the effects of Lactobacillus acidophilus (LA) plus Propionibacterium freudenreichii (PF) on performance, carcass, and intestinal characteristics; serum IgA concentrations; and the prevalence of Escherichia coli O157 (EC). Cattle were fed a steam-flaked corn-based, 92% concentrate diet, and the four direct-fed microbial (DFM) treatments (12 pens/treatment) included in a randomized complete block design were as follows: 1) control, lactose carrier only (CON); 2) 1 x 10(9) cfu of LA NP51 plus 1 x 10(6) cfu of LA NP45 plus 1 x 10(9) cfu of PF NP24 per animal daily (LA45-51H); 3) 1 x 10(9) cfu of LA NP51 plus 1 x 10(9) cfu of PF NP24 per animal daily (LA51); and 4) 1 x 10(6) cfu of LA NP51 plus 1 x 10(6) cfu of LA NP45 plus 1 x 10(9) cfu of PF NP24 per animal daily (LA45-51L). No differences (P > 0.10) were detected for pen-based performance data. The average lamina propria thickness for LA51 and LA45-51H steers was less (P = 0.02) than the average for CON and LA45-51L steers. Moreover, LA51 and LA45-51H steers had a lower (P = 0.06) prevalence of EC shedding than CON and LA45-51L steers. In Exp. 2, 660 steers fed 91% concentrate, steam-flaked corn-based diets were used to determine the effects of the following DFM treatments (10 pens/treatment) on performance, carcass, and intestinal characteristics: 1) control, lactose carrier only (CON); 2) 5 x 10(6) cfu of LA NP51 plus 5 x 10(6) cfu of LA NP45 plus 1 x 10(9) cfu of PF NP24 per animal daily (LA45-51L); and 3) 1 x 10(9) cfu of LA NP51 plus 5 x 10(6) cfu of LA NP45 plus 1 x 10(9) cfu of PF NP24 per animal daily (LA45-51H). Steers were from two weight groups (WG). One group (SDOF; BW at arrival = 351.5 kg) had grazed before arrival, and the other group (LDOF; BW at arrival = 314 kg) had been in a grower yard. A split plot was used with WG as the whole-plot factor and DFM in the split plot. There was an interaction of WG and DFM for ADG (P = 0.05) and for carcass-adjusted ADG (P = 0.08). The simple-effect ADG and carcass-adjusted ADG means for DFM treatments differed (P < or = 0.01) between WG classifications. Within SDOF, ADG for CON and LA45-51L did not differ (P = 0.70), but both were less (P < or = 0.08) than for LA45-51H. Overall, these data indicate that live cultures of LA plus PF did not greatly affect feedlot performance and carcass characteristics. Some of the DFM used decreased fecal EC shedding, which might be related to the results for ileal lamina propria thickness.

Model-based approach for design verification and co-optimization of catastrophic and parametric-related defects due to systematic manufacturing variations

NASA Astrophysics Data System (ADS)

Perry, Dan; Nakamoto, Mark; Verghese, Nishath; Hurat, Philippe; Rouse, Rich

2007-03-01

Model-based hotspot detection and silicon-aware parametric analysis help designers optimize their chips for yield, area and performance without the high cost of applying foundries' recommended design rules. This set of DFM/ recommended rules is primarily litho-driven, but cannot guarantee a manufacturable design without imposing overly restrictive design requirements. This rule-based methodology of making design decisions based on idealized polygons that no longer represent what is on silicon needs to be replaced. Using model-based simulation of the lithography, OPC, RET and etch effects, followed by electrical evaluation of the resulting shapes, leads to a more realistic and accurate analysis. This analysis can be used to evaluate intelligent design trade-offs and identify potential failures due to systematic manufacturing defects during the design phase. The successful DFM design methodology consists of three parts: 1. Achieve a more aggressive layout through limited usage of litho-related recommended design rules. A 10% to 15% area reduction is achieved by using more aggressive design rules. DFM/recommended design rules are used only if there is no impact on cell size. 2. Identify and fix hotspots using a model-based layout printability checker. Model-based litho and etch simulation are done at the cell level to identify hotspots. Violations of recommended rules may cause additional hotspots, which are then fixed. The resulting design is ready for step 3. 3. Improve timing accuracy with a process-aware parametric analysis tool for transistors and interconnect. Contours of diffusion, poly and metal layers are used for parametric analysis. In this paper, we show the results of this physical and electrical DFM methodology at Qualcomm. We describe how Qualcomm was able to develop more aggressive cell designs that yielded a 10% to 15% area reduction using this methodology. Model-based shape simulation was employed during library development to validate architecture choices and to optimize cell layout. At the physical verification stage, the shape simulator was run at full-chip level to identify and fix residual hotspots on interconnect layers, on poly or metal 1 due to interaction between adjacent cells, or on metal 1 due to interaction between routing (via and via cover) and cell geometry. To determine an appropriate electrical DFM solution, Qualcomm developed an experiment to examine various electrical effects. After reporting the silicon results of this experiment, which showed sizeable delay variations due to lithography-related systematic effects, we also explain how contours of diffusion, poly and metal can be used for silicon-aware parametric analysis of transistors and interconnect at the cell-, block- and chip-level.

Integration of mask and silicon metrology in DFM

NASA Astrophysics Data System (ADS)

Matsuoka, Ryoichi; Mito, Hiroaki; Sugiyama, Akiyuki; Toyoda, Yasutaka

2009-03-01

We have developed a highly integrated method of mask and silicon metrology. The method adopts a metrology management system based on DBM (Design Based Metrology). This is the high accurate contouring created by an edge detection algorithm used in mask CD-SEM and silicon CD-SEM. We have inspected the high accuracy, stability and reproducibility in the experiments of integration. The accuracy is comparable with that of the mask and silicon CD-SEM metrology. In this report, we introduce the experimental results and the application. As shrinkage of design rule for semiconductor device advances, OPC (Optical Proximity Correction) goes aggressively dense in RET (Resolution Enhancement Technology). However, from the view point of DFM (Design for Manufacturability), the cost of data process for advanced MDP (Mask Data Preparation) and mask producing is a problem. Such trade-off between RET and mask producing is a big issue in semiconductor market especially in mask business. Seeing silicon device production process, information sharing is not completely organized between design section and production section. Design data created with OPC and MDP should be linked to process control on production. But design data and process control data are optimized independently. Thus, we provided a solution of DFM: advanced integration of mask metrology and silicon metrology. The system we propose here is composed of followings. 1) Design based recipe creation: Specify patterns on the design data for metrology. This step is fully automated since they are interfaced with hot spot coordinate information detected by various verification methods. 2) Design based image acquisition: Acquire the images of mask and silicon automatically by a recipe based on the pattern design of CD-SEM.It is a robust automated step because a wide range of design data is used for the image acquisition. 3) Contour profiling and GDS data generation: An image profiling process is applied to the acquired image based on the profiling method of the field proven CD metrology algorithm. The detected edges are then converted to GDSII format, which is a standard format for a design data, and utilized for various DFM systems such as simulation. Namely, by integrating pattern shapes of mask and silicon formed during a manufacturing process into GDSII format, it makes it possible to bridge highly accurate pattern profile information over to the design field of various EDA systems. These are fully integrated into design data and automated. Bi-directional cross probing between mask data and process control data is allowed by linking them. This method is a solution for total optimization that covers Design, MDP, mask production and silicon device producing. This method therefore is regarded as a strategic DFM approach in the semiconductor metrology.

Management and Outcome of Reduced Fetal Movements-is Ultrasound Necessary?

PubMed

Awad, Nasser Abu; Jordan, Thomas; Mundle, Robert; Farine, Dan

2018-04-01

To review the management and outcome of pregnancies of women presenting to obstetrical triage with decreased fetal movements (DFM). A retrospective review of women presenting with DFMs to two large Canadian obstetrical centres with a combined 9490 deliveries per year. The charts were reviewed for compliance with the Canadian guidelines for demographics (age, parity, GA, comorbidities, etc.), pregnancy management (admission vs. discharge, need to deliver), and pregnancy outcomes (mortality, morbidity, GA at delivery, Apgar scores, etc.). Patients who did not comply with the Canadian guidelines (requiring the patient to count six movements within two hours) were not excluded. The charts of 579 patients who self-reported DFMs between January 2012 and December 2012 were reviewed. The distribution of ages was between 18 and 47 year old. The majority of these patients had no comorbidities (454/579). A significant minority of patients had FM in the triage area (231/579). The Canadian guidelines were interpreted differently in the two centres. In one (level 3), the protocol was to have a biophysical profile (BPP) on all patients prior to discharge, whereas in the other (level 2), only patients with a non-reactive non-stress test (NST) and/or oligohydramnios or intrauterine growth restriction (IUGR) underwent a BPP. All patients had an evaluation by an RN and MD and had a NST on arrival. A combination of NST and BPP was performed on 235/579. The frequency of DFM was 6.1% (level 3 centre: 5.6%, level 2 centre: 7.8%). There were 8 stillbirths on arrival. The 187 patients who had a reactive NST and a normal BPP and were sent home did not have a single stillbirth within 2 weeks. In the level 3 centre, 19 patients were sent home without a BPP and one had a stillbirth within 2 days (5%); in the level 2 hospital, there was only one stillbirth among the NST-only group (0.35%). There were 65 admissions; 46 of them (71%) were delivered, and 50% of them had a Caesarean delivery (baseline around 30%). This is the first study looking at the performance of the Canadian guidelines of 2007. We found that the DFM rate was compatible with the literature (6.1% vs. 5%). The frequency of stillbirth on arrival was 1.4% (8/579). Patients discharged after normal NST and BPP did extremely well (no stillbirths), whereas those admitted following DFM had a relatively high Caesarean delivery rate (50%). This study was not designed to address changes in stillbirth rate, but it outlines the patients who experience DFM and their eventual outcomes. Copyright © 2018 Society of Obstetricians and Gynaecologists of Canada. Published by Elsevier Inc. All rights reserved.

Prevalence of Escherichia coli O157:H7 and performance by beef feedlot cattle given Lactobacillus direct-fed microbials.

PubMed

Brashears, M M; Galyean, M L; Loneragan, G H; Mann, J E; Killinger-Mann, K

2003-05-01

Fecal shedding of Escherichia coli O157:H7, the prevalence of Escherichia coli O157:H7 in pens and on carcasses and hides, and cattle performance as a result of daily dietary supplementation with Lactobacillus-based direct-fed microbials (DFMs) were evaluated in a feeding trial involving 180 beef steers. Steers were evaluated for shedding of E. coli O157:H7 by an immunomagnetic separation technique on arrival at the feedlot, just before treatment with the DFMs, and every 14 days thereafter until slaughter. Composite pen fecal samples were collected every 14 days (alternating weeks with animal testing), and prevalence on hides and carcasses at slaughter was also evaluated. Feedlot performance (body weight gain and feed intake) was measured for the period during which the DFMs were fed. Gain efficiency was calculated as the ratio of weight gain to feed intake. Lactobacillus acidophilus NPC 747 decreased (P < 0.01) the shedding of E. coli O157:H7 in the feces of individual cattle during the feeding period. E. coli O157:H7 was approximately twice as likely to be detected in control animal samples as in samples from animals receiving L. acidophilus NPC 747. In addition, DFM supplementation decreased (P < 0.05) the number of E. coli O157:H7-positive hide samples at harvest and the number of pens testing positive for the pathogen. Body weight gains (on a live or carcass basis) and feed intakes during the DFM supplementation period did not differ among treatments. Gain efficiencies on a live-weight basis did not differ among treatments, but carcass-based gain/feed ratios tended (P < 0.06) to be better for animals receiving the two DFM treatments than for control animals. The results of this study suggest that the feeding of a Lactobacillus-based DFM to cattle will decrease, but not eliminate, fecal shedding of E. coli O157:H7, as well as contamination on hides, without detrimental effects on performance.

A fast and efficient method for device level layout analysis

NASA Astrophysics Data System (ADS)

Dong, YaoQi; Zou, Elaine; Pang, Jenny; Huang, Lucas; Yang, Legender; Zhang, Chunlei; Du, Chunshan; Hu, Xinyi; Wan, Qijian

2017-03-01

There is an increasing demand for device level layout analysis, especially as technology advances. The analysis is to study standard cells by extracting and classifying critical dimension parameters. There are couples of parameters to extract, like channel width, length, gate to active distance, and active to adjacent active distance, etc. for 14nm technology, there are some other parameters that are cared about. On the one hand, these parameters are very important for studying standard cell structures and spice model development with the goal of improving standard cell manufacturing yield and optimizing circuit performance; on the other hand, a full chip device statistics analysis can provide useful information to diagnose the yield issue. Device analysis is essential for standard cell customization and enhancements and manufacturability failure diagnosis. Traditional parasitic parameters extraction tool like Calibre xRC is powerful but it is not sufficient for this device level layout analysis application as engineers would like to review, classify and filter out the data more easily. This paper presents a fast and efficient method based on Calibre equation-based DRC (eqDRC). Equation-based DRC extends the traditional DRC technology to provide a flexible programmable modeling engine which allows the end user to define grouped multi-dimensional feature measurements using flexible mathematical expressions. This paper demonstrates how such an engine and its programming language can be used to implement critical device parameter extraction. The device parameters are extracted and stored in a DFM database which can be processed by Calibre YieldServer. YieldServer is data processing software that lets engineers query, manipulate, modify, and create data in a DFM database. These parameters, known as properties in eqDRC language, can be annotated back to the layout for easily review. Calibre DesignRev can create a HTML formatted report of the results displayed in Calibre RVE which makes it easy to share results among groups. This method has been proven and used in SMIC PDE team and SPICE team.

Development of a methodology for assessing the safety of embedded software systems

NASA Technical Reports Server (NTRS)

Garrett, C. J.; Guarro, S. B.; Apostolakis, G. E.

1993-01-01

A Dynamic Flowgraph Methodology (DFM) based on an integrated approach to modeling and analyzing the behavior of software-driven embedded systems for assessing and verifying reliability and safety is discussed. DFM is based on an extension of the Logic Flowgraph Methodology to incorporate state transition models. System models which express the logic of the system in terms of causal relationships between physical variables and temporal characteristics of software modules are analyzed to determine how a certain state can be reached. This is done by developing timed fault trees which take the form of logical combinations of static trees relating the system parameters at different point in time. The resulting information concerning the hardware and software states can be used to eliminate unsafe execution paths and identify testing criteria for safety critical software functions.

Modelling CO2 flow in naturally fractured geological media using MINC and multiple subregion upscaling procedure

NASA Astrophysics Data System (ADS)

Tatomir, Alexandru Bogdan A. C.; Flemisch, Bernd; Class, Holger; Helmig, Rainer; Sauter, Martin

2017-04-01

Geological storage of CO2 represents one viable solution to reduce greenhouse gas emission in the atmosphere. Potential leakage of CO2 storage can occur through networks of interconnected fractures. The geometrical complexity of these networks is often very high involving fractures occurring at various scales and having hierarchical structures. Such multiphase flow systems are usually hard to solve with a discrete fracture modelling (DFM) approach. Therefore, continuum fracture models assuming average properties are usually preferred. The multiple interacting continua (MINC) model is an extension of the classic double porosity model (Warren and Root, 1963) which accounts for the non-linear behaviour of the matrix-fracture interactions. For CO2 storage applications the transient representation of the inter-porosity two phase flow plays an important role. This study tests the accuracy and computational efficiency of the MINC method complemented with the multiple sub-region (MSR) upscaling procedure versus the DFM. The two phase flow MINC simulator is implemented in the free-open source numerical toolbox DuMux (www.dumux.org). The MSR (Gong et al., 2009) determines the inter-porosity terms by solving simplified local single-phase flow problems. The DFM is considered as the reference solution. The numerical examples consider a quasi-1D reservoir with a quadratic fracture system , a five-spot radial symmetric reservoir, and a completely random generated fracture system. Keywords: MINC, upscaling, two-phase flow, fractured porous media, discrete fracture model, continuum fracture model

Reading, Writing, and Documentation and Managing the Development of User Documentation.

ERIC Educational Resources Information Center

Lindberg, Wayne; Hoffman, Terrye

1987-01-01

The first of two articles addressing the issue of user documentation for computer software discusses the need to teach users how to read documentation. The second presents a guide for writing documentation that is based on the instructional systems design model, and makes suggestions for the desktop publishing of user manuals. (CLB)

Risk-Informed Safety Assurance and Probabilistic Assessment of Mission-Critical Software-Intensive Systems

NASA Technical Reports Server (NTRS)

Guarro, Sergio B.

2010-01-01

This report validates and documents the detailed features and practical application of the framework for software intensive digital systems risk assessment and risk-informed safety assurance presented in the NASA PRA Procedures Guide for Managers and Practitioner. This framework, called herein the "Context-based Software Risk Model" (CSRM), enables the assessment of the contribution of software and software-intensive digital systems to overall system risk, in a manner which is entirely compatible and integrated with the format of a "standard" Probabilistic Risk Assessment (PRA), as currently documented and applied for NASA missions and applications. The CSRM also provides a risk-informed path and criteria for conducting organized and systematic digital system and software testing so that, within this risk-informed paradigm, the achievement of a quantitatively defined level of safety and mission success assurance may be targeted and demonstrated. The framework is based on the concept of context-dependent software risk scenarios and on the modeling of such scenarios via the use of traditional PRA techniques - i.e., event trees and fault trees - in combination with more advanced modeling devices such as the Dynamic Flowgraph Methodology (DFM) or other dynamic logic-modeling representations. The scenarios can be synthesized and quantified in a conditional logic and probabilistic formulation. The application of the CSRM method documented in this report refers to the MiniAERCam system designed and developed by the NASA Johnson Space Center.

Analyzing Carbohydrate-Protein Interaction Based on Single Plasmonic Nanoparticle by Conventional Dark Field Microscopy.

PubMed

Jin, Hong-Ying; Li, Da-Wei; Zhang, Na; Gu, Zhen; Long, Yi-Tao

2015-06-10

We demonstrated a practical method to analyze carbohydrate-protein interaction based on single plasmonic nanoparticles by conventional dark field microscopy (DFM). Protein concanavalin A (ConA) was modified on large sized gold nanoparticles (AuNPs), and dextran was conjugated on small sized AuNPs. As the interaction between ConA and dextran resulted in two kinds of gold nanoparticles coupled together, which caused coupling of plasmonic oscillations, apparent color changes (from green to yellow) of the single AuNPs were observed through DFM. Then, the color information was instantly transformed into a statistic peak wavelength distribution in less than 1 min by a self-developed statistical program (nanoparticleAnalysis). In addition, the interaction between ConA and dextran was proved with biospecific recognition. This approach is high-throughput and real-time, and is a convenient method to analyze carbohydrate-protein interaction at the single nanoparticle level efficiently.

Identified research directions for using manufacturing knowledge earlier in the product lifecycle

PubMed Central

Hedberg, Thomas D.; Hartman, Nathan W.; Rosche, Phil; Fischer, Kevin

2016-01-01

Design for Manufacturing (DFM), especially the use of manufacturing knowledge to support design decisions, has received attention in the academic domain. However, industry practice has not been studied enough to provide solutions that are mature for industry. The current state of the art for DFM is often rule-based functionality within Computer-Aided Design (CAD) systems that enforce specific design requirements. That rule-based functionality may or may not dynamically affect geometry definition. And, if rule-based functionality exists in the CAD system, it is typically a customization on a case-by-case basis. Manufacturing knowledge is a phrase with vast meanings, which may include knowledge on the effects of material properties decisions, machine and process capabilities, or understanding the unintended consequences of design decisions on manufacturing. One of the DFM questions to answer is how can manufacturing knowledge, depending on its definition, be used earlier in the product lifecycle to enable a more collaborative development environment? This paper will discuss the results of a workshop on manufacturing knowledge that highlights several research questions needing more study. This paper proposes recommendations for investigating the relationship of manufacturing knowledge with shape, behavior, and context characteristics of product to produce a better understanding of what knowledge is most important. In addition, the proposal includes recommendations for investigating the system-level barriers to reusing manufacturing knowledge and how model-based manufacturing may ease the burden of knowledge sharing. Lastly, the proposal addresses the direction of future research for holistic solutions of using manufacturing knowledge earlier in the product lifecycle. PMID:27990027

Identified research directions for using manufacturing knowledge earlier in the product lifecycle.

PubMed

Hedberg, Thomas D; Hartman, Nathan W; Rosche, Phil; Fischer, Kevin

2017-01-01

Design for Manufacturing (DFM), especially the use of manufacturing knowledge to support design decisions, has received attention in the academic domain. However, industry practice has not been studied enough to provide solutions that are mature for industry. The current state of the art for DFM is often rule-based functionality within Computer-Aided Design (CAD) systems that enforce specific design requirements. That rule-based functionality may or may not dynamically affect geometry definition. And, if rule-based functionality exists in the CAD system, it is typically a customization on a case-by-case basis. Manufacturing knowledge is a phrase with vast meanings, which may include knowledge on the effects of material properties decisions, machine and process capabilities, or understanding the unintended consequences of design decisions on manufacturing. One of the DFM questions to answer is how can manufacturing knowledge, depending on its definition, be used earlier in the product lifecycle to enable a more collaborative development environment? This paper will discuss the results of a workshop on manufacturing knowledge that highlights several research questions needing more study. This paper proposes recommendations for investigating the relationship of manufacturing knowledge with shape, behavior, and context characteristics of product to produce a better understanding of what knowledge is most important. In addition, the proposal includes recommendations for investigating the system-level barriers to reusing manufacturing knowledge and how model-based manufacturing may ease the burden of knowledge sharing. Lastly, the proposal addresses the direction of future research for holistic solutions of using manufacturing knowledge earlier in the product lifecycle.

DFMSPH14: A C-code for the double folding interaction potential of two spherical nuclei

NASA Astrophysics Data System (ADS)

Gontchar, I. I.; Chushnyakova, M. V.

2016-09-01

This is a new version of the DFMSPH code designed to obtain the nucleus-nucleus potential by using the double folding model (DFM) and in particular to find the Coulomb barrier. The new version uses the charge, proton, and neutron density distributions provided by the user. Also we added an option for fitting the DFM potential by the Gross-Kalinowski profile. The main functionalities of the original code (e.g. the nucleus-nucleus potential as a function of the distance between the centers of mass of colliding nuclei, the Coulomb barrier characteristics, etc.) have not been modified. Catalog identifier: AEFH_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFH_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland. Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 7211 No. of bytes in distributed program, including test data, etc.: 114404 Distribution format: tar.gz Programming language: C Computer: PC and Mac Operation system: Windows XP and higher, MacOS, Unix/Linux Memory required to execute with typical data: below 10 Mbyte Classification: 17.9 Catalog identifier of previous version: AEFH_v1_0 Journal reference of previous version: Comp. Phys. Comm. 181 (2010) 168 Does the new version supersede the previous version?: Yes Nature of physical problem: The code calculates in a semimicroscopic way the bare interaction potential between two colliding spherical nuclei as a function of the center of mass distance. The height and the position of the Coulomb barrier are found. The calculated potential is approximated by an analytical profile (Woods-Saxon or Gross-Kalinowski) near the barrier. Dependence of the barrier parameters upon the characteristics of the effective NN forces (like, e.g. the range of the exchange part of the nuclear term) can be investigated. Method of solution: The nucleus-nucleus potential is calculated using the double folding model with the Coulomb and the effective M3Y NN interactions. For the direct parts of the Coulomb and the nuclear terms, the Fourier transform method is used. In order to calculate the exchange parts, the density matrix expansion method is applied. Typical running time: less than 1 minute. Reason for new version: Many users asked us how to implement their own density distributions in the DFMSPH. Now this option has been added. Also we found that the calculated Double-Folding Potential (DFP) is approximated more accurately by the Gross-Kalinowski (GK) profile. This option has been also added.

KEY COMPARISON: Final report on CCQM-K9.2: Subsequent key comparison on pH determination of phosphate buffer by Harned cell measurements

NASA Astrophysics Data System (ADS)

Spitzer, Petra; Giera, Janine; Fraga, Isabel C.; Tønnes Jakobsen, Pia; Jensen, Hans D.; Hyllested, Peter; Karpov, Oleg; Kutovoy, Viatcheslav; Nakamura, Susumu; Vospelova, Alena; Zvezdina, Valentina

2008-01-01

CCQM-K9.2 was performed supplementary to the key comparison CCQM-K9 on the pH determination of a phosphate buffer with nominal pH ~ 6.9 (at 25 °C). The sample composition was very similar in both comparisons. Only the source of the starting material used for sample preparation was different. The comparison was restricted to the use of the primary method for pH (Harned cell measurement) as defined in the IUPAC Recommendations [2]. The measurement temperatures were 15 °C, 25 °C, 37 °C. CCQM-K9.2, CCQM-K.9 and the first supplementary comparison CCQM-K9.1 [5] are activities of the Electrochemical Working Group (EAWG) of the CCQM. All three comparisons were coordinated by the PTB, Germany. The Danish Primary Laboratory (DPL) successfully took part in the CCQM-K9. Meanwhile the primary set-up for pH in Denmark moved from DPL affiliated to Radiometer Medical to DFM, Denmark. The subsequent comparison allows assessing the degree of equivalence for the measurement of pH at DFM after the move. Due to the interest of other laboratories in demonstrating their progress in pH measurements on the primary level the CCQM-K9.2 supplementary comparison was extended to other participants than DFM, namely NMIJ, VNIIFTRI, INMETRO and CMI. The reported quantity for CCQM-K9.2 was not the pH of the sample but the acidity function at zero chloride molality (see chapter 12). To calculate the pH value from the acidity function it is necessary to know the ionic strength of the sample buffer solution, which was undisclosed by the coordinator. With the exception of the Czech Metrology Institute, CMI, good agreement in the determined acidity function is found between the participants. The results reported by DFM and by PTB agree within their measurement uncertainty at all measurement temperatures. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

Fecal shedding of non-O157 serogroups of Shiga toxin-producing Escherichia coli in feedlot cattle vaccinated with an Escherichia coli O157:H7 SRP vaccine or fed a Lactobacillus-based direct-fed microbial.

PubMed

Cernicchiaro, N; Renter, D G; Cull, C A; Paddock, Z D; Shi, X; Nagaraja, T G

2014-05-01

The objectives of this study were to determine whether fecal shedding of non-O157 Shiga toxin-producing Escherichia coli (STEC) in feedlot cattle was affected by the use of an E. coli O157:H7 vaccine or a direct-fed microbial (DFM) and whether the shedding of a particular non-O157 STEC serogroup within feces was associated with shedding of O157 or other non-O157 STEC serogroups. A total of 17,148 cattle in 40 pens were randomized to receive one, both, or neither (control) of the two interventions: a vaccine based on the siderophore receptor and porin proteins (E. coli SRP vaccine, two doses) and a DFM product (low-dose Bovamine). Fresh fecal samples (30 samples per pen) were collected weekly from pen floors for four consecutive weeks beginning approximately 56 days after study allocation. DNA extracted from enriched samples was tested for STEC O157 and non-O157 serogroups O26, O45, O103, O111, O121, and O145 and for four major virulence genes (stx1, stx2, eae, and ehxA) using an 11-gene multiplex PCR assay. Generalized linear mixed models were used to analyze the effects of treatments and make within-sample comparisons of the presence of O-serogroup-specific genes. Results of cumulative prevalence measures indicated that O157 (14.6%), O26 (10.5%), and O103 (10.3%) were the most prevalent STEC O serogroups. However, the vaccine, DFM, or both had no significant effect (P > 0.05) on fecal prevalence of the six non-O157 STEC serogroups in feedlot cattle. Within-sample comparisons of the presence of STEC serogroup-specific genes indicated that fecal shedding of E. coli O157 in cattle was associated with an increased probability (P < 0.05) of fecal shedding of STEC O26, O45, O103, and O121. Our study revealed that neither the E. coli O157:H7 vaccine, which reduced STEC O157 fecal shedding, nor the DFM significantly affected fecal shedding of non-O157 STEC serogroups, despite the fact that the most prevalent non-O157 STEC serogroups tended to occur concurrently with O157 STEC strains within fecal samples.

Quality in End User Documentation.

ERIC Educational Resources Information Center

Morrison, Ronald

1994-01-01

Discusses quality in end-user documentation for computer applications and explains four approaches to improving quality in end-user documents. Highlights include online help, usability testing, technical writing elements, statistical approaches, and concepts relating to software quality that are also applicable to user manuals. (LRW)

Document creation, linking, and maintenance system

DOEpatents

Claghorn, Ronald [Pasco, WA

2011-02-15

A document creation and citation system designed to maintain a database of reference documents. The content of a selected document may be automatically scanned and indexed by the system. The selected documents may also be manually indexed by a user prior to the upload. The indexed documents may be uploaded and stored within a database for later use. The system allows a user to generate new documents by selecting content within the reference documents stored within the database and inserting the selected content into a new document. The system allows the user to customize and augment the content of the new document. The system also generates citations to the selected content retrieved from the reference documents. The citations may be inserted into the new document in the appropriate location and format, as directed by the user. The new document may be uploaded into the database and included with the other reference documents. The system also maintains the database of reference documents so that when changes are made to a reference document, the author of a document referencing the changed document will be alerted to make appropriate changes to his document. The system also allows visual comparison of documents so that the user may see differences in the text of the documents.

Development and evaluation of nutritional, sensory and glycemic properties of finger millet (Eleusine coracana L.) based food products.

PubMed

Shobana, Shanmugam; Selvi, Ravi Poovizhi; Kavitha, Vasudevan; Gayathri, Nagamuthu; Geetha, Gunasekaran; Gayathri, Rajagopal; Vijayalakshmi, Parthasarthy; Balasubramaniam, K Kandappa Gounder; Ruchi, Vaidya; Sudha, Vasudevan; Anjana, Ranjit Mohan; Unnikrishnan, Ranjit; Malleshi, Nagappa Gurusiddappa; Henry, C Jk; Krishnaswamy, Kamala; Mohan, Viswanathan

2018-01-01

Finger millet (Eleusine coracana L.) (FM) is rich in dietary fibre and is therefore expected to elicit a lower glycemic response compared to other grains. However, there is little data on the glycemic properties of FM-based products. We evaluated the nutritional, sensory and glycemic properties of decorticated millet with lower polish (DFM-LDP), flakes (FMF), vermicelli (FMV) and extruded snack (FMES) (both FMV and FMES with 7-8% added soluble fibre). The nutrient contents of the FM products were evaluated by standard AOAC (Association of Official Analytical Chemists) and AACC (American Association of Cereal Chemists) methods. Sensory evaluation was conducted monadically using a 9-point hedonic scale using untrained panel members. GI testing was conducted using a standardized validated protocol. The study was conducted according to the guidelines laid down by the Declaration of Helsinki, and was approved by the Ethics Committee of the Madras Diabetes Research Foundation. The products had dietary fibre (DF) content between 5.8-15.6 g%. FMES was unique in having a very low fat content (0.17%). Evaluation of sensory perception revealed moderate acceptance of millet based products. The glycemic indices (GI) (mean±SEM) of the products were 84.7±7.7%, 82.3±6.4%, 65.5±5.1% and 65.0±6.6% for DFM-LDP, FMF, FMV and FMES respectively. DFM-LDP and FMF (purely finger millet based products) elicited higher glycemic responses. Comparatively, FMV and FMES (with added functional ingredients) exhibited medium GI values and, are healthier dietary options. It is possible to prepare FM products with lower GI by utilizing functional ingredients.

Transfemoral Implantation of a Fully Repositionable and Retrievable Transcatheter Valve for Noncalcified Pure Aortic Regurgitation.

PubMed

Schofer, Joachim; Nietlispach, Fabian; Bijuklic, Klaudija; Colombo, Antonio; Gatto, Fernando; De Marco, Federico; Mangieri, Antonio; Hansen, Lorenz; Bruschi, Giuseppe; Ruparelia, Neil; Rieß, Friedrich-Christian; Maisano, Franscesco; Latib, Azeem

2015-12-21

This study sought to evaluate the use of the Direct Flow Medical (DFM) transcatheter heart valve (Direct Flow Medical, Santa Rosa, California) for the treatment of noncalcific pure aortic regurgitation (AR). The treatment of noncalcific AR has remained a relative contraindication with transcatheter heart valves due to challenges in anchoring devices in the absence of calcium, concerns of valve embolization, and the high risk of significant residual paravalvular leak. The study population consisted of patients treated for severe noncalcific pure AR with transfemoral implantation of a DFM transcatheter heart valve at 6 European centers. The primary endpoint was the composite endpoint of device success and the secondary endpoint was the composite early safety endpoint (according to the VARC-2 criteria). Eleven high-risk (STS score 8.84 ± 8.9, Logistic EuroSCORE 19.9 ± 7.1) patients (mean age 74.7 ± 12.9 years) were included. Device success was achieved in all patients. In 1 patient, the initial valve prosthesis was retrieved after pull-through, and a second valve was successfully deployed. The early safety endpoint was reached in 91% of the patients, with 1 patient requiring surgical aortic valve replacement secondary to downward dislocation of the prosthesis that was successfully managed with surgical aortic valve replacement. DFM implantation resulted in excellent hemodynamics with none or trivial paravalvular regurgitation in 9 patients and a transprosthetic gradient of 7.7 ± 5.1 mm Hg at 30-day follow up. All patients derived symptomatic benefit following the procedure, with 72% in New York Heart Association functional class I or II. This study reports the feasibility of treating severe noncalcific AR with the Direct Flow prosthesis via the transfemoral route. Copyright © 2015 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

ITS user services document

DOT National Transportation Integrated Search

2005-01-01

Intelligent Transportation System (ITS) user services are surface transportation services that can be provided by some aspect of ITS. These ITS user services document what ITS should do from the user's perspective. A broad range of users are consider...

Secure content objects

DOEpatents

Evans, William D [Cupertino, CA

2009-02-24

A secure content object protects electronic documents from unauthorized use. The secure content object includes an encrypted electronic document, a multi-key encryption table having at least one multi-key component, an encrypted header and a user interface device. The encrypted document is encrypted using a document encryption key associated with a multi-key encryption method. The encrypted header includes an encryption marker formed by a random number followed by a derivable variation of the same random number. The user interface device enables a user to input a user authorization. The user authorization is combined with each of the multi-key components in the multi-key encryption key table and used to try to decrypt the encrypted header. If the encryption marker is successfully decrypted, the electronic document may be decrypted. Multiple electronic documents or a document and annotations may be protected by the secure content object.

Mapping the force field of a hydrogen-bonded assembly

NASA Astrophysics Data System (ADS)

Sweetman, A. M.; Jarvis, S. P.; Sang, Hongqian; Lekkas, I.; Rahe, P.; Wang, Yu; Wang, Jianbo; Champness, N. R.; Kantorovich, L.; Moriarty, P.

2014-05-01

Hydrogen bonding underpins the properties of a vast array of systems spanning a wide variety of scientific fields. From the elegance of base pair interactions in DNA to the symmetry of extended supramolecular assemblies, hydrogen bonds play an essential role in directing intermolecular forces. Yet fundamental aspects of the hydrogen bond continue to be vigorously debated. Here we use dynamic force microscopy (DFM) to quantitatively map the tip-sample force field for naphthalene tetracarboxylic diimide molecules hydrogen-bonded in two-dimensional assemblies. A comparison of experimental images and force spectra with their simulated counterparts shows that intermolecular contrast arises from repulsive tip-sample interactions whose interpretation can be aided via an examination of charge density depletion across the molecular system. Interpreting DFM images of hydrogen-bonded systems therefore necessitates detailed consideration of the coupled tip-molecule system: analyses based on intermolecular charge density in the absence of the tip fail to capture the essential physical chemistry underpinning the imaging mechanism.

Phase modulation atomic force microscope with true atomic resolution

NASA Astrophysics Data System (ADS)

Fukuma, Takeshi; Kilpatrick, Jason I.; Jarvis, Suzanne P.

2006-12-01

We have developed a dynamic force microscope (DFM) working in a novel operation mode which is referred to as phase modulation atomic force microscopy (PM-AFM). PM-AFM utilizes a fixed-frequency excitation signal to drive a cantilever, which ensures stable imaging even with occasional tip crash and adhesion to the surface. The tip-sample interaction force is detected as a change of the phase difference between the cantilever deflection and excitation signals and hence the time response is not influenced by the Q factor of the cantilever. These features make PM-AFM more suitable for high-speed imaging than existing DFM techniques such as amplitude modulation and frequency modulation atomic force microscopies. Here we present the basic principle of PM-AFM and the theoretical limit of its performance. The design of the developed PM-AFM is described and its theoretically limited noise performance is demonstrated. Finally, we demonstrate the true atomic resolution imaging capability of the developed PM-AFM by imaging atomic-scale features of mica in water.

Comparing two anesthesia information management system user interfaces: a usability evaluation.

PubMed

Wanderer, Jonathan P; Rao, Anoop V; Rothwell, Sarah H; Ehrenfeld, Jesse M

2012-11-01

Anesthesia information management systems (AIMS) have been developed by multiple vendors and are deployed in thousands of operating rooms around the world, yet not much is known about measuring and improving AIMS usability. We developed a methodology for evaluating AIMS usability in a low-fidelity simulated clinical environment and used it to compare an existing user interface with a revised version. We hypothesized that the revised user interface would be more useable. In a low-fidelity simulated clinical environment, twenty anesthesia providers documented essential anesthetic information for the start of the case using both an existing and a revised user interface. Participants had not used the revised user interface previously and completed a brief training exercise prior to the study task. All participants completed a workload assessment and a satisfaction survey. All sessions were recorded. Multiple usability metrics were measured. The primary outcome was documentation accuracy. Secondary outcomes were perceived workload, number of documentation steps, number of user interactions, and documentation time. The interfaces were compared and design problems were identified by analyzing recorded sessions and survey results. Use of the revised user interface was shown to improve documentation accuracy from 85.1% to 92.4%, a difference of 7.3% (95% confidence interval [CI] for the difference 1.8 to 12.7). The revised user interface decreased the number of user interactions by 6.5 for intravenous documentation (95% CI 2.9 to 10.1) and by 16.1 for airway documentation (95% CI 11.1 to 21.1). The revised user interface required 3.8 fewer documentation steps (95% CI 2.3 to 5.4). Airway documentation time was reduced by 30.5 seconds with the revised workflow (95% CI 8.5 to 52.4). There were no significant time differences noted in intravenous documentation or in total task time. No difference in perceived workload was found between the user interfaces. Two user interface design problems were identified in the revised user interface. The usability of anesthesia information management systems can be evaluated using a low-fidelity simulated clinical environment. User testing of the revised user interface showed improvement in some usability metrics and highlighted areas for further revision. Vendors of AIMS and those who use them should consider adopting methods to evaluate and improve AIMS usability.

Section 4 User Guide – Primary Support

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics (OPPT) Section 4 application submission process. This document is the user guide for the Primary Support user of the Section 4 tool.

2016 eCDRweb User Guide–Primary Support

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics’ (OPPT) 2016 e-CDR web tool. This document is the user guide for the Primary Support user of the 2016 e-CDRweb tool.

Section 8(d) Health Safety Data Reporting User Guide – Primary Support

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics (OPPT) Section 8(d) Health & Safety Data Reporting application. This document is the user guide for the Primary Support user.

2016 eCDRweb User Guide–Primary Authorized Official

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics’ (OPPT) 2016 e-CDRweb tool. This document is the user guide for the Primary Authorized Official (AO) user of the 2016 e-CDR web tool.

User Manuals for a Primary Care Electronic Medical Record System: A Mixed Methods Study of User- and Vendor-Generated Documents.

PubMed

Shachak, Aviv; Dow, Rustam; Barnsley, Jan; Tu, Karen; Domb, Sharon; Jadad, Alejandro R; Lemieux-Charles, Louise

2013-06-04

Tutorials and user manuals are important forms of impersonal support for using software applications including electronic medical records (EMRs). Differences between user- and vendor documentation may indicate support needs, which are not sufficiently addressed by the official documentation, and reveal new elements that may inform the design of tutorials and user manuals. What are the differences between user-generated tutorials and manuals for an EMR and the official user manual from the software vendor? Effective design of tutorials and user manuals requires careful packaging of information, balance between declarative and procedural texts, an action and task-oriented approach, support for error recognition and recovery, and effective use of visual elements. No previous research compared these elements between formal and informal documents. We conducted an mixed methods study. Seven tutorials and two manuals for an EMR were collected from three family health teams and compared with the official user manual from the software vendor. Documents were qualitatively analyzed using a framework analysis approach in relation to the principles of technical documentation described above. Subsets of the data were quantitatively analyzed using cross-tabulation to compare the types of error information and visual cues in screen captures between user- and vendor-generated manuals. The user-developed tutorials and manuals differed from the vendor-developed manual in that they contained mostly procedural and not declarative information; were customized to the specific workflow, user roles, and patient characteristics; contained more error information related to work processes than to software usage; and used explicit visual cues on screen captures to help users identify window elements. These findings imply that to support EMR implementation, tutorials and manuals need to be customized and adapted to specific organizational contexts and workflows. The main limitation of the study is its generalizability. Future research should address this limitation and may explore alternative approaches to software documentation, such as modular manuals or participatory design.

Longitudinal Surveys of Australian Youth (LSAY) 2009 Cohort User Guide: Data Elements B1--Education (School and School Transition). Technical Paper 74B1

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2012

2012-01-01

This is a support document to the "Longitudinal Surveys of Australian Youth (LSAY) 2009 Cohort User Guide" report. Developed for users of LSAY, the user guide consolidates information about the LSAY 2009 cohort into one document. This support document provides school and school transition information for the guide. [For the main report,…

2016 e-CDRweb User Guide – Secondary Authorized Official

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics’ (OPPT) 2016 e-CDRweb tool. This document is the user guide for the Secondary Authorized Official (AO) user of the 2016 e-CDR web tool.

Xyce Parallel Electronic Simulator : reference guide, version 2.0.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoekstra, Robert John; Waters, Lon J.; Rankin, Eric Lamont

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide.

Xyce™ Parallel Electronic Simulator Reference Guide Version 6.8

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, Eric R.; Aadithya, Karthik Venkatraman; Mei, Ting

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce . This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide.

Airport Performance Model : Volume 2 - User's Manual and Program Documentation

DOT National Transportation Integrated Search

1978-10-01

Volume II contains a User's manual and program documentation for the Airport Performance Model. This computer-based model is written in FORTRAN IV for the DEC-10. The user's manual describes the user inputs to the interactive program and gives sample...

Capturing User Reading Behaviors for Personalized Document Summarization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Songhua; Jiang, Hao; Lau, Francis

2011-01-01

We propose a new personalized document summarization method that observes a user's personal reading preferences. These preferences are inferred from the user's reading behaviors, including facial expressions, gaze positions, and reading durations that were captured during the user's past reading activities. We compare the performance of our algorithm with that of a few peer algorithms and software packages. The results of our comparative study show that our algorithm can produce more superior personalized document summaries than all the other methods in that the summaries generated by our algorithm can better satisfy a user's personal preferences.

Poisoning deaths in Central China (Hubei): A 10-year retrospective study of forensic autopsy cases.

PubMed

Zhou, Lan; Liu, Liang; Chang, Lin; Li, Ling

2011-01-01

A retrospective study of autopsy cases was conducted at the Department of Forensic Medicine, Tongji Medical College (DFM-TMC), in Hubei, China to describe the characteristics of poisoning deaths from 1999 to 2008. A total of 212 poisoning deaths were investigated by DFM-TMC during the 10-year period. The poisoning deaths ranged from 17 cases in 1999 to 27 cases in 2008. Of the 212 cases, 82 deaths (38.7%) were from pesticides, 36 deaths (17.0%) from carbon monoxide, 34 deaths (16.0%) from drugs, 22 deaths (10.4%) from alcohol, 17 deaths (8.0%) from other chemicals, 15 deaths (7.1%) from poisonous plants and animals, and six deaths (2.8%) from heavy metals. Of the 82 pesticide poisoning deaths, 43 (52.4%) cases were caused by rodenticides, mainly tetramine (N = 39). The majority of poisoning deaths were accidents (63.7%), followed by suicides (25.9%) and homicides (3.8%). The manner of death could not be determined in 14 cases (6.6%). © 2010 American Academy of Forensic Sciences.

Duplex communicable implanted antenna for magnetic direct feeding method: Functional electrical stimulation

NASA Astrophysics Data System (ADS)

Kato, Kentaro; Matsuki, Hidetoshi; Sato, Fumihiro; Satoh, Tadakuni; Handa, Nobuyasu

2009-04-01

Functional electrical stimulation (FES) is the therapy used for the rehabilitation of lost movement function by applying electrical stimulation (ES) to paralyzed extremities. To realize ES, we adapted the implanted direct feeding method (DFM). In this method, small implanted stimulators are placed under the skin at a depth of 10-20 mm and stimulus energy and signals for controlling devices are applied to them by a mounted system using magnetic coupling. This method has the merits of having no percutaneous points and high-precision stimulation. However, since the mounted system and implanted elements are separated, it is necessary to add feedback information from inside the body to confirm the system operation for safety therapy or to rehabilitate motor function smoothly. Satisfying both restrictions, we propose the magnetic connective dual resonance (MCDR) antenna, which has two resonance circuits. Adding the LC serial circuit to the LC parallel circuit gives the sending function. In this paper, we report the principle of the MCDR antenna and verify its duplex communication ability through communication experiment. This antenna enables DFM of FES to rehabilitate more complex movements.

Design for manufacturability production management activity report

NASA Astrophysics Data System (ADS)

Miyazaki, Norihiko; Sato, T.; Honma, M.; Yoshioka, N.; Hosono, K.; Onodera, T.; Itoh, H.; Suzuki, H.; Uga, T.; Kadota, K.; Iriki, N.

2006-05-01

Design For Manufacturability Production Management (DFM-PM) Subcommittee has been started in succession to Reticle Management Subcommittee (RMS) in Semiconductor Manufacturing Technology Committee for Japan (SMTCJ) from 2005. Our activity focuses on the SoC (System On Chip) Business, and it pursues the improvement of communication in manufacturing technique. The first theme of activity is the investigation and examination of the new trends about production (manufacturer) technology and related information, and proposals of business solution. The second theme is the standardization activity about manufacture technology and the cooperation with related semiconductors' organizations. And the third theme is holding workshop and support for promotion and spread of the standardization technology throughout semiconductor companies. We expand a range of scope from design technology to wafer pattern reliability and we will propose the competition domain, the collaboration area and the standardization technology on DFM. Furthermore, we will be able to make up a SoC business model as the 45nm node technology beyond manufacturing platform in cooperating with the design information and the production information by utilizing EDA technology.

Revision of laser-induced damage threshold evaluation from damage probability data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bataviciute, Gintare; Grigas, Povilas; Smalakys, Linas

2013-04-15

In this study, the applicability of commonly used Damage Frequency Method (DFM) is addressed in the context of Laser-Induced Damage Threshold (LIDT) testing with pulsed lasers. A simplified computer model representing the statistical interaction between laser irradiation and randomly distributed damage precursors is applied for Monte Carlo experiments. The reproducibility of LIDT predicted from DFM is examined under both idealized and realistic laser irradiation conditions by performing numerical 1-on-1 tests. A widely accepted linear fitting resulted in systematic errors when estimating LIDT and its error bars. For the same purpose, a Bayesian approach was proposed. A novel concept of parametricmore » regression based on varying kernel and maximum likelihood fitting technique is introduced and studied. Such approach exhibited clear advantages over conventional linear fitting and led to more reproducible LIDT evaluation. Furthermore, LIDT error bars are obtained as a natural outcome of parametric fitting which exhibit realistic values. The proposed technique has been validated on two conventionally polished fused silica samples (355 nm, 5.7 ns).« less

Xyce parallel electronic simulator reference guide, Version 6.0.1.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, Eric R; Mei, Ting; Russo, Thomas V.

2014-01-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide [1] .

Xyce parallel electronic simulator reference guide, version 6.0.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, Eric R; Mei, Ting; Russo, Thomas V.

2013-08-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide [1] .

Section 8(a) PAIR User Guide – Primary Authorized Official

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics (OPPT) ‘Section 8(a) PAIR’ application submission process. This document is the user guide for the Primary Authorized Official (AO) user of the Section 8(a) PAIR tool.

Historical evolution and present status of family medicine in sri lanka.

PubMed

Ramanayake, R P J C

2013-04-01

Sri Lankan health system consists of Allopathic, Ayurvedic, Unani, and several other systems of medicine and allopathic medicine is catering to the majority of the health needs of the people. As in many other countries, Sri Lankan health system consists of both the state and the private sector General practitioners, MOs in OPDs of hospitals and MOs of central dispensaries, provide primary medical care in Sri Lanka. Most of the general practices are solo practices. One does not need postgraduate qualification or training in general practice to start a general practice. There is no registered population for any particular health care institution in the state sector or in the private sector and there is no strict referral procedure from primary care to secondary or tertiary care. Family doctors have been practicing in Sri Lanka for well over 150 years. The first national organization of general practitioners was Independent Medical Practitioner (IMPA)'s organization which was founded in 1929 and the College of General Practitioners of Sri Lanka was founded in 1974. College conducts its own Membership Course and Examination (MCGP) since 1999. Family Medicine was introduced to undergraduate curriculum in Sri Lanka in early 1980s and now almost all the medical faculties in the country have included Family Medicine in their curricula. In 1979, General Practice/Family Medicine was recognized as a specialty in Sri Lanka by the postgraduate institute of Medicine. Diploma in Family Medicine (DFM) and MD Family Medicine are the pathways for postgraduate training in Sri Lanka. At present 50 to 60 doctors enroll for DFM every year and the country has about 20 specialists (with MD) in Family Medicine. The author's vision for the future is that all the primary care doctors to have a postgraduate qualification in Family Medicine either DFM, MD, or MCGP which is a far cry from the present status.

New method of contour-based mask-shape compiler

NASA Astrophysics Data System (ADS)

Matsuoka, Ryoichi; Sugiyama, Akiyuki; Onizawa, Akira; Sato, Hidetoshi; Toyoda, Yasutaka

2007-10-01

We have developed a new method of accurately profiling a mask shape by utilizing a Mask CD-SEM. The method is intended to realize high accuracy, stability and reproducibility of the Mask CD-SEM adopting an edge detection algorithm as the key technology used in CD-SEM for high accuracy CD measurement. In comparison with a conventional image processing method for contour profiling, it is possible to create the profiles with much higher accuracy which is comparable with CD-SEM for semiconductor device CD measurement. In this report, we will introduce the algorithm in general, the experimental results and the application in practice. As shrinkage of design rule for semiconductor device has further advanced, an aggressive OPC (Optical Proximity Correction) is indispensable in RET (Resolution Enhancement Technology). From the view point of DFM (Design for Manufacturability), a dramatic increase of data processing cost for advanced MDP (Mask Data Preparation) for instance and surge of mask making cost have become a big concern to the device manufacturers. In a sense, it is a trade-off between the high accuracy RET and the mask production cost, while it gives a significant impact on the semiconductor market centered around the mask business. To cope with the problem, we propose the best method for a DFM solution in which two dimensional data are extracted for an error free practical simulation by precise reproduction of a real mask shape in addition to the mask data simulation. The flow centering around the design data is fully automated and provides an environment where optimization and verification for fully automated model calibration with much less error is available. It also allows complete consolidation of input and output functions with an EDA system by constructing a design data oriented system structure. This method therefore is regarded as a strategic DFM approach in the semiconductor metrology.

A Two-Step Method to Select Major Surge-Producing Extratropical Cyclones from a 10,000-Year Stochastic Catalog

NASA Astrophysics Data System (ADS)

Keshtpoor, M.; Carnacina, I.; Yablonsky, R. M.

2016-12-01

Extratropical cyclones (ETCs) are the primary driver of storm surge events along the UK and northwest mainland Europe coastlines. In an effort to evaluate the storm surge risk in coastal communities in this region, a stochastic catalog is developed by perturbing the historical storm seeds of European ETCs to account for 10,000 years of possible ETCs. Numerical simulation of the storm surge generated by the full 10,000-year stochastic catalog, however, is computationally expensive and may take several months to complete with available computational resources. A new statistical regression model is developed to select the major surge-generating events from the stochastic ETC catalog. This regression model is based on the maximum storm surge, obtained via numerical simulations using a calibrated version of the Delft3D-FM hydrodynamic model with a relatively coarse mesh, of 1750 historical ETC events that occurred over the past 38 years in Europe. These numerically-simulated surge values were regressed to the local sea level pressure and the U and V components of the wind field at the location of 196 tide gauge stations near the UK and northwest mainland Europe coastal areas. The regression model suggests that storm surge values in the area of interest are highly correlated to the U- and V-component of wind speed, as well as the sea level pressure. Based on these correlations, the regression model was then used to select surge-generating storms from the 10,000-year stochastic catalog. Results suggest that roughly 105,000 events out of 480,000 stochastic storms are surge-generating events and need to be considered for numerical simulation using a hydrodynamic model. The selected stochastic storms were then simulated in Delft3D-FM, and the final refinement of the storm population was performed based on return period analysis of the 1750 historical event simulations at each of the 196 tide gauges in preparation for Delft3D-FM fine mesh simulations.

Evaluation and Selection of Bacillus Species Based on Enzyme Production, Antimicrobial Activity, and Biofilm Synthesis as Direct-Fed Microbial Candidates for Poultry

PubMed Central

Latorre, Juan D.; Hernandez-Velasco, Xochitl; Wolfenden, Ross E.; Vicente, Jose L.; Wolfenden, Amanda D.; Menconi, Anita; Bielke, Lisa R.; Hargis, Billy M.; Tellez, Guillermo

2016-01-01

Social concern about misuse of antibiotics as growth promoters (AGP) and generation of multidrug-resistant bacteria have restricted the dietary inclusion of antibiotics in livestock feed in several countries. Direct-fed microbials (DFM) are one of the multiple alternatives commonly evaluated as substitutes of AGP. Sporeformer bacteria from the genus Bacillus have been extensively investigated because of their extraordinary properties to form highly resistant endospores, produce antimicrobial compounds, and synthesize different exogenous enzymes. The purpose of the present study was to evaluate and select Bacillus spp. from environmental and poultry sources as DFM candidates, considering their enzyme production profile, biofilm synthesis capacity, and pathogen-inhibition activity. Thirty-one Bacillus isolates were screened for in vitro relative enzyme activity of amylase, protease, lipase, and phytase using a selective media for each enzyme, with 3/31 strains selected as superior enzyme producers. These three isolates were identified as Bacillus subtilis (1/3), and Bacillus amyloliquefaciens (2/3), based on biochemical tests and 16S rRNA sequence analysis. For evaluation of biofilm synthesis, the generation of an adherent crystal violet-stained ring was determined in polypropylene tubes, resulting in 11/31 strains showing a strong biofilm formation. Moreover, all Bacillus strains were evaluated for growth inhibition activity against Salmonella enterica serovar Enteritidis (26/31), Escherichia coli (28/31), and Clostridioides difficile (29/31). Additionally, in previous in vitro and in vivo studies, these selected Bacillus strains have shown to be resistant to different biochemical conditions of the gastrointestinal tract of poultry. Results of the present study suggest that the selection and consumption of Bacillus-DFM, producing a variable set of enzymes and antimicrobial compounds, may contribute to enhanced performance through improving nutrient digestibility, reducing intestinal viscosity, maintaining a beneficial gut microbiota, and promoting healthy intestinal integrity in poultry. PMID:27812526

Validation of an arterial tortuosity measure with application to hypertension collection of clinical hypertensive patients

PubMed Central

2011-01-01

Background Hypertension may increase tortuosity or twistedness of arteries. We applied a centerline extraction algorithm and tortuosity metric to magnetic resonance angiography (MRA) brain images to quantitatively measure the tortuosity of arterial vessel centerlines. The most commonly used arterial tortuosity measure is the distance factor metric (DFM). This study tested a DFM based measurement’s ability to detect increases in arterial tortuosity of hypertensives using existing images. Existing images presented challenges such as different resolutions which may affect the tortuosity measurement, different depths of the area imaged, and different artifacts of imaging that require filtering. Methods The stability and accuracy of alternative centerline algorithms was validated in numerically generated models and test brain MRA data. Existing images were gathered from previous studies and clinical medical systems by manually reading electronic medical records to identify hypertensives and negatives. Images of different resolutions were interpolated to similar resolutions. Arterial tortuosity in MRA images was measured from a DFM curve and tested on numerically generated models as well as MRA images from two hypertensive and three negative control populations. Comparisons were made between different resolutions, different filters, hypertensives versus negatives, and different negative controls. Results In tests using numerical models of a simple helix, the measured tortuosity increased as expected with more tightly coiled helices. Interpolation reduced resolution-dependent differences in measured tortuosity. The Korean hypertensive population had significantly higher arterial tortuosity than its corresponding negative control population across multiple arteries. In addition one negative control population of different ethnicity had significantly less arterial tortuosity than the other two. Conclusions Tortuosity can be compared between images of different resolutions by interpolating from lower to higher resolutions. Use of a universal negative control was not possible in this study. The method described here detected elevated arterial tortuosity in a hypertensive population compared to the negative control population and can be used to study this relation in other populations. PMID:22166145

Validation of an arterial tortuosity measure with application to hypertension collection of clinical hypertensive patients.

PubMed

Diedrich, Karl T; Roberts, John A; Schmidt, Richard H; Kang, Chang-Ki; Cho, Zang-Hee; Parker, Dennis L

2011-10-18

Hypertension may increase tortuosity or twistedness of arteries. We applied a centerline extraction algorithm and tortuosity metric to magnetic resonance angiography (MRA) brain images to quantitatively measure the tortuosity of arterial vessel centerlines. The most commonly used arterial tortuosity measure is the distance factor metric (DFM). This study tested a DFM based measurement's ability to detect increases in arterial tortuosity of hypertensives using existing images. Existing images presented challenges such as different resolutions which may affect the tortuosity measurement, different depths of the area imaged, and different artifacts of imaging that require filtering. The stability and accuracy of alternative centerline algorithms was validated in numerically generated models and test brain MRA data. Existing images were gathered from previous studies and clinical medical systems by manually reading electronic medical records to identify hypertensives and negatives. Images of different resolutions were interpolated to similar resolutions. Arterial tortuosity in MRA images was measured from a DFM curve and tested on numerically generated models as well as MRA images from two hypertensive and three negative control populations. Comparisons were made between different resolutions, different filters, hypertensives versus negatives, and different negative controls. In tests using numerical models of a simple helix, the measured tortuosity increased as expected with more tightly coiled helices. Interpolation reduced resolution-dependent differences in measured tortuosity. The Korean hypertensive population had significantly higher arterial tortuosity than its corresponding negative control population across multiple arteries. In addition one negative control population of different ethnicity had significantly less arterial tortuosity than the other two. Tortuosity can be compared between images of different resolutions by interpolating from lower to higher resolutions. Use of a universal negative control was not possible in this study. The method described here detected elevated arterial tortuosity in a hypertensive population compared to the negative control population and can be used to study this relation in other populations.

Petrological Geodynamics of Mantle Melting II. AlphaMELTS + Multiphase Flow: Dynamic Fractional Melting

NASA Astrophysics Data System (ADS)

Tirone, Massimiliano

2018-03-01

In this second installment of a series that aims to investigate the dynamic interaction between the composition and abundance of the solid mantle and its melt products, the classic interpretation of fractional melting is extended to account for the dynamic nature of the process. A multiphase numerical flow model is coupled with the program AlphaMELTS, which provides at the moment possibly the most accurate petrological description of melting based on thermodynamic principles. The conceptual idea of this study is based on a description of the melting process taking place along a 1-D vertical ideal column where chemical equilibrium is assumed to apply in two local sub-systems separately on some spatial and temporal scale. The solid mantle belongs to a local sub-system (ss1) that does not interact chemically with the melt reservoir which forms a second sub-system (ss2). The local melt products are transferred in the melt sub-system ss2 where the melt phase eventually can also crystallize into a different solid assemblage and will evolve dynamically. The main difference with the usual interpretation of fractional melting is that melt is not arbitrarily and instantaneously extracted from the mantle, but instead remains a dynamic component of the model, hence the process is named dynamic fractional melting (DFM). Some of the conditions that may affect the DFM model are investigated in this study, in particular the effect of temperature, mantle velocity at the boundary of the mantle column. A comparison is made with the dynamic equilibrium melting (DEM) model discussed in the first installment. The implications of assuming passive flow or active flow are also considered to some extent. Complete data files of most of the DFM simulations, four animations and two new DEM simulations (passive/active flow) are available following the instructions in the supplementary material.

Xyce parallel electronic simulator reference guide, version 6.1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, Eric R; Mei, Ting; Russo, Thomas V.

2014-03-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide [1] .

Genetics and imaging to assess oocyte and preimplantation embryo health.

PubMed

Warner, C M; Newmark, J A; Comiskey, M; De Fazio, S R; O'Malley, D M; Rajadhyaksha, M; Townsend, D J; McKnight, S; Roysam, B; Dwyer, P J; DiMarzio, C A

2004-01-01

Two major criteria are currently used in human assisted reproductive technologies (ART) to evaluate oocyte and preimplantation embryo health: (1) rate of preimplantation embryonic development; and (2) overall morphology. A major gene that regulates the rate of preimplantation development is the preimplantation embryo development (Ped) gene, discovered in our laboratory. In mice, presence of the Ped gene product, Qa-2 protein, results in a fast rate of preimplantation embryonic development, compared with a slow rate of preimplantation embryonic development for embryos that are lacking Qa-2 protein. Moreover, mice that express Qa-2 protein have an overall reproductive advantage that extends beyond the preimplantation period, including higher survival to birth, higher birthweight, and higher survival to weaning. Data are presented that suggest that Qa-2 increases the rate of development of early embryos by acting as a cell-signalling molecule and that phosphatidylinositol-32 kinase is involved in the cell-signalling pathway. The most likely human homologue of Qa-2 has recently been identified as human leukocyte antigen (HLA)-G. Data are presented which show that HLA-G, like Qa-2, is located in lipid rafts, implying that HLA-G also acts as a signalling molecule. In order to better evaluate the second criterion used in ART (i.e. overall morphology), a unique and innovative imaging microscope has been constructed, the Keck 3-D fusion microscope (Keck 3DFM). The Keck 3DFM combines five different microscopic modes into a single platform, allowing multi-modal imaging of the specimen. One of the modes, the quadrature tomographic microscope (QTM), creates digital images of non-stained transparent cells by measuring changes in the index of refraction. Quadrature tomographic microscope images of oocytes and preimplantation mouse embryos are presented for the first time. The digital information from the QTM images should allow the number of cells in a preimplantation embryo to be counted non-invasively. The Keck 3DFM is also being used to assess mitochondrial distribution in mouse oocytes and embryos by using the k-means clustering algorithm. Both the number of cells in preimplantation embryos and mitochondrial distribution are related to oocyte and embryo health. New imaging data obtained from the Keck 3DFM, combined with genetic and biochemical approaches, have the promise of being able to distinguish healthy from unhealthy oocytes and embryos in a non-invasive manner. The goal is to apply the information from our mouse model system to the clinic in order to identify one and only one healthy embryo for transfer back to the mother undergoing an ART procedure. This approach has the potential to increase the success rate of ART and to decrease the high, and undesirable, multiple birth rate presently associated with ART.

Representation-based user interfaces for the audiovisual library of the year 2000

NASA Astrophysics Data System (ADS)

Aigrain, Philippe; Joly, Philippe; Lepain, Philippe; Longueville, Veronique

1995-03-01

The audiovisual library of the future will be based on computerized access to digitized documents. In this communication, we address the user interface issues which will arise from this new situation. One cannot simply transfer a user interface designed for the piece by piece production of some audiovisual presentation and make it a tool for accessing full-length movies in an electronic library. One cannot take a digital sound editing tool and propose it as a means to listen to a musical recording. In our opinion, when computers are used as mediations to existing contents, document representation-based user interfaces are needed. With such user interfaces, a structured visual representation of the document contents is presented to the user, who can then manipulate it to control perception and analysis of these contents. In order to build such manipulable visual representations of audiovisual documents, one needs to automatically extract structural information from the documents contents. In this communication, we describe possible visual interfaces for various temporal media, and we propose methods for the economically feasible large scale processing of documents. The work presented is sponsored by the Bibliotheque Nationale de France: it is part of the program aiming at developing for image and sound documents an experimental counterpart to the digitized text reading workstation of this library.

Software Document Inventory Program

NASA Technical Reports Server (NTRS)

Merwarth, P. D.

1984-01-01

Program offers ways to file and locate sources of reference. DOCLIB system consists of two parts to serve needs of two type of users: general user and librarian. DOCLIB systems provides user with interactive, menudriven document inventory capability.

Can Visualizing Document Space Improve Users' Information Foraging?

ERIC Educational Resources Information Center

Song, Min

1998-01-01

This study shows how users access relevant information in a visualized document space and determine whether BiblioMapper, a visualization tool, strengthens an information retrieval (IR) system and makes it more usable. BiblioMapper, developed for a CISI collection, was evaluated by accuracy, time, and user satisfaction. Users' navigation…

User Manuals for a Primary Care Electronic Medical Record System: A Mixed Methods Study of User- and Vendor-Generated Documents

PubMed Central

Dow, Rustam; Barnsley, Jan; Tu, Karen; Domb, Sharon; Jadad, Alejandro R.; Lemieux-Charles, Louise

2015-01-01

Research problem Tutorials and user manuals are important forms of impersonal support for using software applications including electronic medical records (EMRs). Differences between user- and vendor documentation may indicate support needs, which are not sufficiently addressed by the official documentation, and reveal new elements that may inform the design of tutorials and user manuals. Research question What are the differences between user-generated tutorials and manuals for an EMR and the official user manual from the software vendor? Literature review Effective design of tutorials and user manuals requires careful packaging of information, balance between declarative and procedural texts, an action and task-oriented approach, support for error recognition and recovery, and effective use of visual elements. No previous research compared these elements between formal and informal documents. Methodology We conducted an mixed methods study. Seven tutorials and two manuals for an EMR were collected from three family health teams and compared with the official user manual from the software vendor. Documents were qualitatively analyzed using a framework analysis approach in relation to the principles of technical documentation described above. Subsets of the data were quantitatively analyzed using cross-tabulation to compare the types of error information and visual cues in screen captures between user- and vendor-generated manuals. Results and discussion The user-developed tutorials and manuals differed from the vendor-developed manual in that they contained mostly procedural and not declarative information; were customized to the specific workflow, user roles, and patient characteristics; contained more error information related to work processes than to software usage; and used explicit visual cues on screen captures to help users identify window elements. These findings imply that to support EMR implementation, tutorials and manuals need to be customized and adapted to specific organizational contexts and workflows. The main limitation of the study is its generalizability. Future research should address this limitation and may explore alternative approaches to software documentation, such as modular manuals or participatory design. PMID:26190888

User Modeling in Adaptive Hypermedia Educational Systems

ERIC Educational Resources Information Center

Martins, Antonio Constantino; Faria, Luiz; Vaz de Carvalho, Carlos; Carrapatoso, Eurico

2008-01-01

This document is a survey in the research area of User Modeling (UM) for the specific field of Adaptive Learning. The aims of this document are: To define what it is a User Model; To present existing and well known User Models; To analyze the existent standards related with UM; To compare existing systems. In the scientific area of User Modeling…

Use of Electronic Documentation for Quality Improvement in Hospice

PubMed Central

Cagle, John G.; Rokoske, Franziska S.; Durham, Danielle; Schenck, Anna P.; Spence, Carol; Hanson, Laura C.

2015-01-01

Little evidence exists on the use of electronic documentation in hospice and its relationship to quality improvement practices. The purposes of this study were to: (1) estimate the prevalence of electronic documentation use in hospice; (2) identify organizational characteristics associated with use of electronic documentation; and (3) determine whether quality measurement practices differed based on documentation format (electronic vs. nonelectronic). Surveys concerning the use of electronic documentation for quality improvement practices and the monitoring of quality-related care and outcomes were collected from 653 hospices. Users of electronic documentation were able to monitor a wider range of quality-related data than users of nonelectronic documentation. Quality components such as advanced care planning, cultural needs, experience during care of the actively dying, and the number/types of care being delivered were more likely to be documented by users of electronic documentation. Use of electronic documentation may help hospices to monitor quality and compliance. PMID:22267819

School Survey on Crime and Safety (SSOCS) 2000 Public-Use Data Files, User's Manual, and Detailed Data Documentation. [CD-ROM].

ERIC Educational Resources Information Center

National Center for Education Statistics (ED), Washington, DC.

This CD-ROM contains the raw, public-use data from the 2000 School Survey on Crime and Safety (SSOCS) along with a User's Manual and Detailed Data Documentation. The data are provided in SAS, SPSS, STATA, and ASCII formats. The User's Manual and the Detailed Data Documentation are provided as .pdf files. (Author)

A hypertext system that learns from user feedback

NASA Technical Reports Server (NTRS)

Mathe, Nathalie

1994-01-01

Retrieving specific information from large amounts of documentation is not an easy task. It could be facilitated if information relevant in the current problem solving context could be automatically supplied to the user. As a first step towards this goal, we have developed an intelligent hypertext system called CID (Computer Integrated Documentation). Besides providing an hypertext interface for browsing large documents, the CID system automatically acquires and reuses the context in which previous searches were appropriate. This mechanism utilizes on-line user information requirements and relevance feedback either to reinforce current indexing in case of success or to generate new knowledge in case of failure. Thus, the user continually augments and refines the intelligence of the retrieval system. This allows the CID system to provide helpful responses, based on previous usage of the documentation, and to improve its performance over time. We successfully tested the CID system with users of the Space Station Freedom requirements documents. We are currently extending CID to other application domains (Space Shuttle operations documents, airplane maintenance manuals, and on-line training). We are also exploring the potential commercialization of this technique.

How Analysts Cognitively “Connect the Dots”

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bradel, Lauren; Self, Jessica S.; Endert, Alexander

2013-06-04

As analysts attempt to make sense of a collection of documents, such as intelligence analysis reports, they may wish to “connect the dots” between pieces of information that may initially seem unrelated. This process of synthesizing information between information requires users to make connections between pairs of documents, creating a conceptual story. We conducted a user study to analyze the process by which users connect pairs of documents and how they spatially arrange information. Users created conceptual stories that connected the dots using organizational strategies that ranged in complexity. We propose taxonomies for cognitive connections and physical structures used whenmore » trying to “connect the dots” between two documents. We compared the user-created stories with a data-mining algorithm that constructs chains of documents using co-occurrence metrics. Using the insight gained into the storytelling process, we offer design considerations for the existing data mining algorithm and corresponding tools to combine the power of data mining and the complex cognitive processing of analysts.« less

eCDRweb User Guide–Primary Support

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics’ (OPPT) e-CDR web tool. E-CDRweb is the electronic, web-based tool provided by the Environmental Protection Agency (EPA) for the submission of Chemical Data Reporting (CDR) information. This document is the user guide for the Primary Support user of the e-CDRweb tool.

eCDRweb User Guide–Primary Authorized Official

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics’ (OPPT) e-CDRweb tool. E-CDRweb is the electronic, web-based tool provided by the Environmental Protection Agency (EPA) for the submission of Chemical Data Reporting (CDR) information. This document is the user guide for the Primary Authorized Official (AO) user of the e-CDR webtool

eCDRweb User Guide–Secondary Support

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics’ (OPPT) e-CDR web tool. E-CDRweb is the electronic, web-based tool provided by the Environmental Protection Agency (EPA) for the submission of Chemical Data Reporting (CDR) information. This document is the user guide for the Secondary Support user of the e-CDRweb tool.

Automating testbed documentation and database access using World Wide Web (WWW) tools

NASA Technical Reports Server (NTRS)

Ames, Charles; Auernheimer, Brent; Lee, Young H.

1994-01-01

A method for providing uniform transparent access to disparate distributed information systems was demonstrated. A prototype testing interface was developed to access documentation and information using publicly available hypermedia tools. The prototype gives testers a uniform, platform-independent user interface to on-line documentation, user manuals, and mission-specific test and operations data. Mosaic was the common user interface, and HTML (Hypertext Markup Language) provided hypertext capability.

A Compositional Relevance Model for Adaptive Information Retrieval

NASA Technical Reports Server (NTRS)

Mathe, Nathalie; Chen, James; Lu, Henry, Jr. (Technical Monitor)

1994-01-01

There is a growing need for rapid and effective access to information in large electronic documentation systems. Access can be facilitated if information relevant in the current problem solving context can be automatically supplied to the user. This includes information relevant to particular user profiles, tasks being performed, and problems being solved. However most of this knowledge on contextual relevance is not found within the contents of documents, and current hypermedia tools do not provide any easy mechanism to let users add this knowledge to their documents. We propose a compositional relevance network to automatically acquire the context in which previous information was found relevant. The model records information on the relevance of references based on user feedback for specific queries and contexts. It also generalizes such information to derive relevant references for similar queries and contexts. This model lets users filter information by context of relevance, build personalized views of documents over time, and share their views with other users. It also applies to any type of multimedia information. Compared to other approaches, it is less costly and doesn't require any a priori statistical computation, nor an extended training period. It is currently being implemented into the Computer Integrated Documentation system which enables integration of various technical documents in a hypertext framework.

An Organizational Effectiveness Officer Tackles a Management Job: A follow-Up OE Case Study

DTIC Science & Technology

1981-06-01

time, the COPPER "users manual " had not been updated to reflect the current methods and procedures of the PPSD. RAJ Johnson felt that documentation of...Users’ Manual , now known as PPSD Users’ Manual , to document every action and show document ilow with a flow chart. Also prior to implementing the change...comments is a document to work from. I’ll use it from my level, but let’s push it down in the organizacion ." When interviewed in December, RAJ Johnson was

An Inter-Personal Information Sharing Model Based on Personalized Recommendations

NASA Astrophysics Data System (ADS)

Kamei, Koji; Funakoshi, Kaname; Akahani, Jun-Ichi; Satoh, Tetsuji

In this paper, we propose an inter-personal information sharing model among individuals based on personalized recommendations. In the proposed model, we define an information resource as shared between people when both of them consider it important --- not merely when they both possess it. In other words, the model defines the importance of information resources based on personalized recommendations from identifiable acquaintances. The proposed method is based on a collaborative filtering system that focuses on evaluations from identifiable acquaintances. It utilizes both user evaluations for documents and their contents. In other words, each user profile is represented as a matrix of credibility to the other users' evaluations on each domain of interests. We extended the content-based collaborative filtering method to distinguish other users to whom the documents should be recommended. We also applied a concept-based vector space model to represent the domain of interests instead of the previous method which represented them by a term-based vector space model. We introduce a personalized concept-base compiled from each user's information repository to improve the information retrieval in the user's environment. Furthermore, the concept-spaces change from user to user since they reflect the personalities of the users. Because of different concept-spaces, the similarity between a document and a user's interest varies for each user. As a result, a user receives recommendations from other users who have different view points, achieving inter-personal information sharing based on personalized recommendations. This paper also describes an experimental simulation of our information sharing model. In our laboratory, five participants accumulated a personal repository of e-mails and web pages from which they built their own concept-base. Then we estimated the user profiles according to personalized concept-bases and sets of documents which others evaluated. We simulated inter-personal recommendation based on the user profiles and evaluated the performance of the recommendation method by comparing the recommended documents to the result of the content-based collaborative filtering.

e-CDRweb User Guide – Secondary Authorized Official

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics’ (OPPT) e-CDRweb tool. E-CDRweb is the electronic, web-based tool provided by the Environmental Protection Agency (EPA) for the submission of Chemical Data Reporting (CDR) information. This document is the user guide for the Secondary Authorized Official (AO) user of the e-CDR web tool.

Mining User Dwell Time for Personalized Web Search Re-Ranking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Songhua; Jiang, Hao; Lau, Francis

We propose a personalized re-ranking algorithm through mining user dwell times derived from a user's previously online reading or browsing activities. We acquire document level user dwell times via a customized web browser, from which we then infer conceptword level user dwell times in order to understand a user's personal interest. According to the estimated concept word level user dwell times, our algorithm can estimate a user's potential dwell time over a new document, based on which personalized webpage re-ranking can be carried out. We compare the rankings produced by our algorithm with rankings generated by popular commercial search enginesmore » and a recently proposed personalized ranking algorithm. The results clearly show the superiority of our method. In this paper, we propose a new personalized webpage ranking algorithmthrough mining dwell times of a user. We introduce a quantitative model to derive concept word level user dwell times from the observed document level user dwell times. Once we have inferred a user's interest over the set of concept words the user has encountered in previous readings, we can then predict the user's potential dwell time over a new document. Such predicted user dwell time allows us to carry out personalized webpage re-ranking. To explore the effectiveness of our algorithm, we measured the performance of our algorithm under two conditions - one with a relatively limited amount of user dwell time data and the other with a doubled amount. Both evaluation cases put our algorithm for generating personalized webpage rankings to satisfy a user's personal preference ahead of those by Google, Yahoo!, and Bing, as well as a recent personalized webpage ranking algorithm.« less

3D Visualization of Earthquake Focal Mechanisms Using ArcScene

USGS Publications Warehouse

Labay, Keith A.; Haeussler, Peter J.

2007-01-01

In addition to the default settings, there are several other options in 3DFM that can be adjusted. The appearance of the symbols can be changed by (1) creating rings around the fault planes that are colored based on magnitude, (2) showing only the fault planes instead of a sphere, (3) drawing a flat disc that identifies the primary nodal plane, (4) or by displaying the null, pressure, and tension axes. The size of the symbols can be changed by adjusting their diameter, scaling them based on the magnitude of the earthquake, or scaling them by the estimated size of the rupture patch based on earthquake magnitude. It is also possible to filter the data using any combination of the strike, dip, rake, magnitude, depth, null axis plunge, pressure axis plunge, tension axis plunge, or fault type values of the points. For a large dataset, these filters can be used to create different subsets of symbols. Symbols created by 3DFM are stored in graphics layers that appear in the ArcScene® table of contents. Multiple graphics layers can be created and saved to preserve the output from different symbol options.

[Wear behavior of enamel and veneering ceramics].

PubMed

Gao, Qing-ping; Chao, Yong-lie; Jian, Xin-chun; Guo, Feng; Meng, Yu-kun

2007-10-01

To compare the wear between the enamel and two types of dental decoration porcelains for all-ceramic restorations (Vita-alpha, Vintage AL). Friction coefficients, wear scar width, element concentrations and wear surface evolution were considered relatively to the tribology of that in vivo situation. The wear scars of the samples were characterized by means of dynamic atomic force microscopy (DFM). The different element concentrations of the surface before/after the wear test were determined with energy dispersion spectrometry (EDS). The friction coefficient varied from time in each kind of material. The statistical differences between materials were observed in wear scar width and properties of materials (P<0.05). DFM results showed wear surface of natural tooth full of abrasive particles and denaturation of dental texture. Wear surface of veneering ceramics consisted mainly of abrasive particles, plough and microcracking. EDS results showed that the element concentration of Fe was obviously found on the samples after wear. The main underlying mechanisms of natural teeth wear are abrasive, and denaturation of dental texture. Abrasive wear, adhesion and fatigue of veneering ceramics characterize the wear patterns which plays different role in Vita-alpha and Vintage AL. The wear patterns of veneering ceramics can be described as mild wear.

[Development of an ophthalmological clinical information system for inpatient eye clinics].

PubMed

Kortüm, K U; Müller, M; Babenko, A; Kampik, A; Kreutzer, T C

2015-12-01

In times of increased digitalization in healthcare, departments of ophthalmology are faced with the challenge of introducing electronic clinical health records (EHR); however, specialized software for ophthalmology is not available with most major EHR sytems. The aim of this project was to create specific ophthalmological user interfaces for large inpatient eye care providers within a hospitalwide EHR. Additionally the integration of ophthalmic imaging systems, scheduling and surgical documentation should be achieved. The existing EHR i.s.h.med (Siemens, Germany) was modified using advanced business application programming (ABAP) language to create specific ophthalmological user interfaces for reproduction and moreover optimization of the clinical workflow. A user interface for documentation of ambulatory patients with eight tabs was designed. From June 2013 to October 2014 a total of 61,551 patient contact details were documented. For surgical documentation a separate user interface was set up. Digital clinical orders for documentation of registration and scheduling of operations user interfaces were also set up. A direct integration of ophthalmic imaging modalities could be established. An ophthalmologist-orientated EHR for outpatient and surgical documentation for inpatient clinics was created and successfully implemented. By incorporation of imaging procedures the foundation of future smart/big data analyses was created.

Development and evaluation of nursing user interface screens using multiple methods.

PubMed

Hyun, Sookyung; Johnson, Stephen B; Stetson, Peter D; Bakken, Suzanne

2009-12-01

Building upon the foundation of the Structured Narrative Electronic Health Record (EHR) model, we applied theory-based (combined Technology Acceptance Model and Task-Technology Fit Model) and user-centered methods to explore nurses' perceptions of functional requirements for an electronic nursing documentation system, design user interface screens reflective of the nurses' perspectives, and assess nurses' perceptions of the usability of the prototype user interface screens. The methods resulted in user interface screens that were perceived to be easy to use, potentially useful, and well-matched to nursing documentation tasks associated with Nursing Admission Assessment, Blood Administration, and Nursing Discharge Summary. The methods applied in this research may serve as a guide for others wishing to implement user-centered processes to develop or extend EHR systems. In addition, some of the insights obtained in this study may be informative to the development of safe and efficient user interface screens for nursing document templates in EHRs.

Software Manuals: Where Instructional Design and Technical Writing Join Forces.

ERIC Educational Resources Information Center

Thurston, Walter, Ed.

1986-01-01

Presents highlights from a panel discussion by well known San Francisco Bay area documentation writers, instructional designers, and human performance technologists. Three issues on user performance and documentation are addressed: whether people avoid reading user manuals and why; major human factors influencing documentation use; and…

DocCube: Multi-Dimensional Visualization and Exploration of Large Document Sets.

ERIC Educational Resources Information Center

Mothe, Josiane; Chrisment, Claude; Dousset, Bernard; Alaux, Joel

2003-01-01

Describes a user interface that provides global visualizations of large document sets to help users formulate the query that corresponds to their information needs. Highlights include concept hierarchies that users can browse to specify and refine information needs; knowledge discovery in databases and texts; and multidimensional modeling.…

WASP7 Stream Transport - Model Theory and User's Guide: Supplement to Water Quality Analysis Simulation Program (WASP) User Documentation

EPA Science Inventory

The standard WASP7 stream transport model calculates water flow through a branching stream network that may include both free-flowing and ponded segments. This supplemental user manual documents the hydraulic algorithms, including the transport and hydrogeometry equations, the m...

Acceptance of Cloud Services in Face-to-Face Computer-Supported Collaborative Learning: A Comparison between Single-User Mode and Multi-User Mode

ERIC Educational Resources Information Center

Wang, Chia-Sui; Huang, Yong-Ming

2016-01-01

Face-to-face computer-supported collaborative learning (CSCL) was used extensively to facilitate learning in classrooms. Cloud services not only allow a single user to edit a document, but they also enable multiple users to simultaneously edit a shared document. However, few researchers have compared student acceptance of such services in…

Application of Discrete Fracture Modeling and Upscaling Techniques to Complex Fractured Reservoirs

NASA Astrophysics Data System (ADS)

Karimi-Fard, M.; Lapene, A.; Pauget, L.

2012-12-01

During the last decade, an important effort has been made to improve data acquisition (seismic and borehole imaging) and workflow for reservoir characterization which has greatly benefited the description of fractured reservoirs. However, the geological models resulting from the interpretations need to be validated or calibrated against dynamic data. Flow modeling in fractured reservoirs remains a challenge due to the difficulty of representing mass transfers at different heterogeneity scales. The majority of the existing approaches are based on dual continuum representation where the fracture network and the matrix are represented separately and their interactions are modeled using transfer functions. These models are usually based on idealized representation of the fracture distribution which makes the integration of real data difficult. In recent years, due to increases in computer power, discrete fracture modeling techniques (DFM) are becoming popular. In these techniques the fractures are represented explicitly allowing the direct use of data. In this work we consider the DFM technique developed by Karimi-Fard et al. [1] which is based on an unstructured finite-volume discretization. The mass flux between two adjacent control-volumes is evaluated using an optimized two-point flux approximation. The result of the discretization is a list of control-volumes with the associated pore-volumes and positions, and a list of connections with the associated transmissibilities. Fracture intersections are simplified using a connectivity transformation which contributes considerably to the efficiency of the methodology. In addition, the method is designed for general purpose simulators and any connectivity based simulator can be used for flow simulations. The DFM technique is either used standalone or as part of an upscaling technique. The upscaling techniques are required for large reservoirs where the explicit representation of all fractures and faults is not possible. Karimi-Fard et al. [2] have developed an upscaling technique based on DFM representation. The original version of this technique was developed to construct a dual-porosity model from a discrete fracture description. This technique has been extended and generalized so it can be applied to a wide range of problems from reservoirs with a few or no fracture to highly fractured reservoirs. In this work, we present the application of these techniques to two three-dimensional fractured reservoirs constructed using real data. The first model contains more than 600 medium and large scale fractures. The fractures are not always connected which requires a general modeling technique. The reservoir has 50 wells (injectors and producers) and water flooding simulations are performed. The second test case is a larger reservoir with sparsely distributed faults. Single-phase simulations are performed with 5 producing wells. [1] Karimi-Fard M., Durlofsky L.J., and Aziz K. 2004. An efficient discrete-fracture model applicable for general-purpose reservoir simulators. SPE Journal, 9(2): 227-236. [2] Karimi-Fard M., Gong B., and Durlofsky L.J. 2006. Generation of coarse-scale continuum flow models from detailed fracture characterizations. Water Resources Research, 42(10): W10423.

Development of multiple user AMTRAN on the Datacraft DC6024

NASA Technical Reports Server (NTRS)

Austin, S. L.

1973-01-01

A multiple user version of AMTRAn was implemented on the Datacraft DC6024 computer is reported. The major portion of the multiple user logic is incorporated in the main program which remains in core during all AMTRAN processes. A detailed flowchart of the main program is provided as documentation of the multiple user capability. Activities are directed toward perfecting its capability, providing new features in response to user needs and requests, providing a two-dimensional array AMTRAN containing multiple user logic, and providing documentation as the tasks progress.

Minimum Hamiltonian ascent trajectory evaluation (MASTRE) program (update to automatic flight trajectory design, performance prediction, and vehicle sizing for support of shuttle and shuttle derived vehicles) users manual

NASA Technical Reports Server (NTRS)

Lyons, J. T.; Borchers, William R.

1993-01-01

Documentation for the User Interface Program for the Minimum Hamiltonian Ascent Trajectory Evaluation (MASTRE) is provided. The User Interface Program is a separate software package designed to ease the user input requirements when using the MASTRE Trajectory Program. This document supplements documentation on the MASTRE Program that consists of the MASTRE Engineering Manual and the MASTRE Programmers Guide. The User Interface Program provides a series of menus and tables using the VAX Screen Management Guideline (SMG) software. These menus and tables allow the user to modify the MASTRE Program input without the need for learning the various program dependent mnemonics. In addition, the User Interface Program allows the user to modify and/or review additional input Namelist and data files, to build and review command files, to formulate and calculate mass properties related data, and to have a plotting capability.

NASA Docking System (NDS) Users Guide: International Space Station Program. Type 4

NASA Technical Reports Server (NTRS)

Tabakman, Alexander

2010-01-01

The NASA Docking System (NDS) Users Guide provides an overview of the basic information needed to integrate the NDS onto a Host Vehicle (HV). This Users Guide is intended to provide a vehicle developer with a fundamental understanding of the NDS technical and operations information to support their program and engineering integration planning. The Users Guide identifies the NDS Specification, Interface Definition or Requirement Documents that contain the complete technical details and requirements that a vehicle developer must use to design, develop and verify their systems will interface with NDS. This Guide is an initial reference and must not be used as a design document. In the event of conflict between this Users Guide and other applicable interface definition or requirements documents; the applicable document will take precedence. This Users Guide is organized in three main sections. Chapter 1 provides an overview of the NDS and CDA hardware and the operations concepts for the NDS. Chapter 2 provides information for Host Vehicle Program integration with the NDS Project Office. Chapter 2 describes the NDS Project organization, integration and verification processes, user responsibilities, and specification and interface requirement documents. Chapter 3 provides a summary of basic technical information for the NDS design. Chapter 3 includes NDS hardware component descriptions, physical size and weight characteristics, and summary of the capabilities and constraints for the various NDS sub-systems.

RH Packaging Program Guidance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Washington TRU Solutions, LLC

The purpose of this program guidance document is to provide technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the SARP and/or C of C shall govern. The C of C states: ''...each package must be prepared for shipment and operated in accordance with themore » procedures described in Chapter 7.0, ''Operating Procedures,'' of the application.'' It further states: ''...each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, ''Acceptance Tests and Maintenance Program of the Application.'' Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M&O) contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC approved, users need to be familiar with 10 CFR {section} 71.11, ''Deliberate Misconduct.'' Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. This document details the instructions to be followed to operate, maintain, and test the RH-TRU 72-B packaging. This Program Guidance standardizes instructions for all users. Users shall follow these instructions. Following these instructions assures that operations are safe and meet the requirements of the SARP. This document is available on the Internet at: ttp://www.ws/library/t2omi/t2omi.htm. Users are responsible for ensuring they are using the current revision and change notices. Sites may prepare their own document using the word-for-word steps in th is document, in sequence, including Notes and cautions. Site specific information may be included as necessary. The document, and revisions, must then be submitted to CBFO at sitedocuments@wipp.ws for approval. A copy of the approval letter from CBFO shall be available for audit purposes. Users may develop site-specific procedures addressing preoperational activities, quality assurance (QA), hoisting and rigging, and radiation health physics to be used with the instructions contained in this document. Users may recommend changes to this document by submitting their recommendations (in writing) to the WIPP M&O Contractor RH Packaging Maintenance Engineer for evaluation. If approved, the change(s) will be incorporated into this document for use by ALL users. Before first use and every 12 months after, user sites will be audited to this document to ensure compliance. They will also be audited within one year from the effective date of revisions to this document.« less

Mask Analysis Program (MAP) reference manual

NASA Technical Reports Server (NTRS)

Mitchell, C. L.

1976-01-01

A document intended to serve as a User's Manual and a Programmer's Manual for the Mask Analysis Program is presented. The first portion of the document is devoted to the user. It contains all of the information required to execute MAP. The remainder of the document describes the details of MAP software logic. Although the information in this portion is not required to run the program, it is recommended that every user review it to gain an appreciation for the program functions.

User Problems Associated with the Services of Federal and Quasi-Federal Technical Information Producing Agencies.

ERIC Educational Resources Information Center

Los Angeles Regional Technical Information Users Council, CA.

Nine reports of the Los Angeles Regional Technical Information Users Council, which identify and discuss user problem areas and recommend solutions, comprise this document. The topics of the reports are: (1) Air Force Technical Objective Document Release Program (AFTOD); (2) Army Qualitative Requirements Information Program (QDRI); (3)…

LANES 1 Users' Guide

NASA Technical Reports Server (NTRS)

Jordan, J.

1985-01-01

This document is intended for users of the Local Area Network Extensible Simulator, version I. This simulator models the performance of a Fiber Optic network under a variety of loading conditions and network characteristics. The options available to the user for defining the network conditions are described in this document. Computer hardware and software requirements are also defined.

An Efficiency Comparison of Document Preparation Systems Used in Academic Research and Development

PubMed Central

Knauff, Markus; Nejasmic, Jelica

2014-01-01

The choice of an efficient document preparation system is an important decision for any academic researcher. To assist the research community, we report a software usability study in which 40 researchers across different disciplines prepared scholarly texts with either Microsoft Word or LaTeX. The probe texts included simple continuous text, text with tables and subheadings, and complex text with several mathematical equations. We show that LaTeX users were slower than Word users, wrote less text in the same amount of time, and produced more typesetting, orthographical, grammatical, and formatting errors. On most measures, expert LaTeX users performed even worse than novice Word users. LaTeX users, however, more often report enjoying using their respective software. We conclude that even experienced LaTeX users may suffer a loss in productivity when LaTeX is used, relative to other document preparation systems. Individuals, institutions, and journals should carefully consider the ramifications of this finding when choosing document preparation strategies, or requiring them of authors. PMID:25526083

Collaborative Platform for DFM

DTIC Science & Technology

2007-12-20

generation litho hotspot checkers have also been implemented in automated hotspot fixers that can automatically fix designs by making small changes...processing side (ex. new CMP models, etch models, litho models) and on the circuit side (ex. Process aware circuit analysis or yield optimization...Since final gate CD is a function of not only litho , but Post Exposure Bake, ashing, and etch, the processing module can be augmented with more

Unifying the RET design flow with portable modeling information

NASA Astrophysics Data System (ADS)

Sweis, Jason; Staud, Wolf; Naber, Bob; Laidig, Tom; Van Denbroeke, Doug

2006-05-01

The RET Design Flow has become a conglomeration of various point tools and methodologies. Deep sub-wavelength DFM requirements have forced the design and manufacturing communities into very tight collaboration. EDA is also driven to provide an infrastructure to facilitate communication for these communities. Having this infrastructure in place has a direct impact on productivity and quality for which the value added is emphasized here.

GLOFRIM - A globally applicable framework for integrated hydrologic-hydrodynamic inundation modelling

NASA Astrophysics Data System (ADS)

Hoch, J. M.; Neal, J. C.; Baart, F.; Van Beek, L. P.; Winsemius, H.; Bates, P. D.; Bierkens, M. F.

2017-12-01

Currently, many approaches to provide detailed flood hazard and risk estimates are built upon specific hydrologic or hydrodynamic model routines. By applying these routines in stand-alone mode important processes can however not accurately be described. For instance, global hydrologic models run at coarse spatial resolution, not supporting the detailed simulation of flood hazard. Hydrodynamic models excel in the computations of open water flow dynamics, but dependent on specific runoff or observed discharge as input. In most cases hydrodynamic models are forced at the boundaries and thus cannot account for water sources within the model domain, limiting the simulation of inundation dynamics to reaches fed by upstream boundaries. Recently, Hoch et al. (HESS, 2017) coupled PCR-GLOBWB (PCR) with the hydrodynamic model Delft3D Flexible Mesh (DFM). By means of the Basic Model Interface both models were connected on a cell-by-cell basis, allowing for spatially explicit coupling. Model results showed that discharge simulations can profit from model coupling compared to stand-alone runs. As model results of a coupled simulation depend on the quality of the models, it would be worthwhile to allow a suite of models to be coupled. To facilitate this, we present GLOFRIM, a globally applicable framework for integrated hydrologic-hydrodynamic inundation modelling. In the current version coupling between PCR and both DFM and LISFLOOD-FP (LFP) can be established (Hoch et al., GMDD, 2017). First results show that differences between both hydrodynamic models are present in the timing of peak discharge which is most likely due to differences in channel-floodplain interactions and bathymetry processing. Having benchmarked inundation extent, LFP and DFM agree for around half of the inundated area which is attributable to variations in grid size. Results also indicate that, despite using identical boundary conditions and forcing, the schematization itself as well as internal processes can still greatly influence results. In general, the application of GLOFRIM brings several advantages. For example, with PCR being a global model, it is possible to reduce the dependency of observation data for discharge boundaries, and benchmarking of hydrodynamic models is greatly facilitated by employing identical hydrologic forcing.

Relation between brain architecture and mathematical ability in children: a DBM study.

PubMed

Han, Zhaoying; Davis, Nicole; Fuchs, Lynn; Anderson, Adam W; Gore, John C; Dawant, Benoit M

2013-12-01

Population-based studies indicate that between 5 and 9 percent of US children exhibit significant deficits in mathematical reasoning, yet little is understood about the brain morphological features related to mathematical performances. In this work, deformation-based morphometry (DBM) analyses have been performed on magnetic resonance images of the brains of 79 third graders to investigate whether there is a correlation between brain morphological features and mathematical proficiency. Group comparison was also performed between Math Difficulties (MD-worst math performers) and Normal Controls (NC), where each subgroup consists of 20 age and gender matched subjects. DBM analysis is based on the analysis of the deformation fields generated by non-rigid registration algorithms, which warp the individual volumes to a common space. To evaluate the effect of registration algorithms on DBM results, five nonrigid registration algorithms have been used: (1) the Adaptive Bases Algorithm (ABA); (2) the Image Registration Toolkit (IRTK); (3) the FSL Nonlinear Image Registration Tool; (4) the Automatic Registration Tool (ART); and (5) the normalization algorithm available in SPM8. The deformation field magnitude (DFM) was used to measure the displacement at each voxel, and the Jacobian determinant (JAC) was used to quantify local volumetric changes. Results show there are no statistically significant volumetric differences between the NC and the MD groups using JAC. However, DBM analysis using DFM found statistically significant anatomical variations between the two groups around the left occipital-temporal cortex, left orbital-frontal cortex, and right insular cortex. Regions of agreement between at least two algorithms based on voxel-wise analysis were used to define Regions of Interest (ROIs) to perform an ROI-based correlation analysis on all 79 volumes. Correlations between average DFM values and standard mathematical scores over these regions were found to be significant. We also found that the choice of registration algorithm has an impact on DBM-based results, so we recommend using more than one algorithm when conducting DBM studies. To the best of our knowledge, this is the first study that uses DBM to investigate brain anatomical features related to mathematical performance in a relatively large population of children. © 2013.

Atomic Layer Deposition of GeSe Films Using HGeCl3 and [(CH3)3Si]2Se with the Discrete Feeding Method for the Ovonic Threshold Switch.

PubMed

Kim, Woohyun; Yoo, Sijung; Yoo, Chanyoung; Park, Eui-Sang; Jeon, Jeongwoo; Kwon, Young Jae; Woo, Kyung Seok; Kim, Han Joon; Lee, Yoon Kyeung; Hwang, Cheol Seong

2018-06-19

The ovonic threshold switch (OTS) based on the voltage snapback of amorphous chalcogenides possesses several desirable characteristics for passive memory array. Among the materials that can be used as OTS, GeSe has a strong glass-forming ability (~350°C crystallization temperature), with a simple binary composition. Described herein is a new method of depositing GeSe films through atomic layer deposition (ALD), in which HGeCl3 and [(CH3)3Si]2Se are used as Ge and Se precursors, respectively. The stoichiometric GeSe thin films were formed through a ligand exchange reaction between the two precursor molecules, without the adoption of an additional reaction gas, at low substrate temperatures ranging from 70 to 150°C. The pseudo-saturation behavior of ALD, however, which requires a long time to achieve the saturation growth rate, was observed. This was due to the adverse influence of the physisorbed precursor and byproduct molecules on the efficient chemical adsorption reaction between the precursors and reaction sites. To overcome the slow saturation and excessive use of the Ge precursor, the discrete feeding method (DFM), where HGeCl3 is supplied multiple times consecutively with subdivided pulse times, was adopted. DFM led to the saturation of the GeSe growth rate at a much shorter total injection time of the Ge precursor, and improved the film density and oxidation resistance properties. The GeSe film grown via DFM exhibited a short OTS time of ~40 ns, a ~107 ON/OFF current ratio, and ~104 selectivity. The OTS behavior was consistent with the modified Poole-Frenkel (PF) mechanism in the OFF state. In contrast, the similar GeSe film grown through the conventional ALD showed a low density and high vulnerability to oxidation, which prevented the OTS performance. The ALD method of GeSe films introduced here will contribute to the fabrication of a three-dimensionally integrated memory as a selector device for preventing sneak current. © 2018 IOP Publishing Ltd.

User-documented food consumption data from publicly available apps: an analysis of opportunities and challenges for nutrition research.

PubMed

Maringer, Marcus; Van't Veer, Pieter; Klepacz, Naomi; Verain, Muriel C D; Normann, Anne; Ekman, Suzanne; Timotijevic, Lada; Raats, Monique M; Geelen, Anouk

2018-06-09

The need for a better understanding of food consumption behaviour within its behavioural context has sparked the interest of nutrition researchers for user-documented food consumption data collected outside the research context using publicly available nutrition apps. The study aims to characterize the scientific, technical, legal and ethical features of this data in order to identify the opportunities and challenges associated with using this data for nutrition research. A search for apps collecting food consumption data was conducted in October 2016 against UK Google Play and iTunes storefronts. 176 apps were selected based on user ratings and English language support. Publicly available information from the app stores and app-related websites was investigated and relevant data extracted and summarized. Our focus was on characteristics related to scientific relevance, data management and legal and ethical governance of user-documented food consumption data. Food diaries are the most common form of data collection, allowing for multiple inputs including generic food items, packaged products, or images. Standards and procedures for compiling food databases used for estimating energy and nutrient intakes remain largely undisclosed. Food consumption data is interlinked with various types of contextual data related to behavioural motivation, physical activity, health, and fitness. While exchange of data between apps is common practise, the majority of apps lack technical documentation regarding data export. There is a similar lack of documentation regarding the implemented terms of use and privacy policies. While users are usually the owners of their data, vendors are granted irrevocable and royalty free licenses to commercially exploit the data. Due to its magnitude, diversity, and interconnectedness, user-documented food consumption data offers promising opportunities for a better understanding of habitual food consumption behaviour and its determinants. Non-standardized or non-documented food data compilation procedures, data exchange protocols and formats, terms of use and privacy statements, however, limit possibilities to integrate, process and share user-documented food consumption data. An ongoing research effort is required, to keep pace with the technical advancements of food consumption apps, their evolving data networks and the legal and ethical regulations related to protecting app users and their personal data.

Xyce parallel electronic simulator : reference guide.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mei, Ting; Rankin, Eric Lamont; Thornquist, Heidi K.

2011-05-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide. The Xyce Parallel Electronic Simulator has been written to support, in a rigorous manner, the simulation needs of the Sandia National Laboratories electrical designers. It is targeted specifically to runmore » on large-scale parallel computing platforms but also runs well on a variety of architectures including single processor workstations. It also aims to support a variety of devices and models specific to Sandia needs. This document is intended to complement the Xyce Users Guide. It contains comprehensive, detailed information about a number of topics pertinent to the usage of Xyce. Included in this document is a netlist reference for the input-file commands and elements supported within Xyce; a command line reference, which describes the available command line arguments for Xyce; and quick-references for users of other circuit codes, such as Orcad's PSpice and Sandia's ChileSPICE.« less

ascii2gdocs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nightingale, Trever

2011-11-30

Enables UNIX and Mac OS X command line users to put (individually or batch mode) local ascii files into Google Documents, where the ascii is converted to Google Document format using formatting the user can specify.

Features: Real-Time Adaptive Feature and Document Learning for Web Search.

ERIC Educational Resources Information Center

Chen, Zhixiang; Meng, Xiannong; Fowler, Richard H.; Zhu, Binhai

2001-01-01

Describes Features, an intelligent Web search engine that is able to perform real-time adaptive feature (i.e., keyword) and document learning. Explains how Features learns from users' document relevance feedback and automatically extracts and suggests indexing keywords relevant to a search query, and learns from users' keyword relevance feedback…

Designing Better Camels: Developing Effective Documentation for Computer Software.

ERIC Educational Resources Information Center

Zacher, Candace M.

This guide to the development of effective documentation for users of computer software begins by identifying five types of documentation, i.e., training manuals, user guides, tutorials, on-screen help comments, and troubleshooting manuals. Six steps in the development process are then outlined and briefly described: (1) planning and preparation;…

Effects of Document Holder on Postural Neck Muscles Activity among Computer Users: A Preliminary Study.

PubMed

Ambusam, Subramaniam; Omar, Baharudin; Joseph, Leonard; Deepashini, Harithasan

2015-01-01

Computer users are exposed to work related neck disorders due to repetitive movement and static posture for prolonged period. Viewing document and typing simultaneously are one of the contributing factors for neck disorders. This preliminary study was conducted to evaluate the effects of the document holder on the postural neck muscles activity among computer users. Nine healthy participants with pre-defined inclusion and exclusion criteria were recruited for the study. Neck muscles activity were analyzed using the surface electromyography (EMG) in five different document location such as flat right, flat left, flat center, stand right and stand left during a 5 min typing task. The mean and standard deviation results showed a least amount of muscles activity using a document holder compared to without document holder. Nevertheless, the statistical analysis showed no significant differences between the using of a document holder. The effects of document holder on head excursion and neck muscle activity is recommended in clinical neck pain population.

EMAP Users Manual.

ERIC Educational Resources Information Center

Kotz, Arnold; Redondo, Rory

Presented is the user's manual for the Educational Manpower Information Sources Project (EMAP), an information file containing approximately 325 document abstracts related to the field of educational planning. (The EMAP file is described in document SP 006 747.) (JB)

A Proposed Integration Environment for Enhanced User Interaction and Value-Adding of Electronic Documents: An Empirical Evaluation.

ERIC Educational Resources Information Center

Liew, Chern Li; Chennupati, K. R.; Foo, Schubert

2001-01-01

Explores the potential and impact of an innovative information environment in enhancing user activities in using electronic documents for various tasks, and to support the value-adding of these e-documents. Discusses the conceptual design and prototyping of a proposed environment, PROPIE. Presents an empirical and formative evaluation of the…

Project Turnover Deliverables for the SY Farm Enraf Annulus Leak Detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

SCAIEF, C.C.

2000-09-19

This document identifies the deliverables that ensure the end user of the SY Farm Enraf Annulus Leak Detectors (ALD) has all the documentation and training required for operating and maintaining the new system. All deliverable items checked on the Acceptance For Beneficial Use (ABU) form have been completed and are available to the end user. This document was written as required by HNF-IP-0842, Volume IV section 3.12 Acceptance of Structures, Systems, and Components for Beneficial Use. This document applies to the deliverable documentation required to operate and maintain the SY Farm Enraf ALD System. Appendix A provides a copy ofmore » the ABU form as listed in the appendix of TWR-4092, Engineering Task Plan for the New SY Farm Annulus Leak Detectors. This document attests that all required deliverable items checked on the ABU have been completed and are available to the end user.« less

A knowledge-driven approach to biomedical document conceptualization.

PubMed

Zheng, Hai-Tao; Borchert, Charles; Jiang, Yong

2010-06-01

Biomedical document conceptualization is the process of clustering biomedical documents based on ontology-represented domain knowledge. The result of this process is the representation of the biomedical documents by a set of key concepts and their relationships. Most of clustering methods cluster documents based on invariant domain knowledge. The objective of this work is to develop an effective method to cluster biomedical documents based on various user-specified ontologies, so that users can exploit the concept structures of documents more effectively. We develop a flexible framework to allow users to specify the knowledge bases, in the form of ontologies. Based on the user-specified ontologies, we develop a key concept induction algorithm, which uses latent semantic analysis to identify key concepts and cluster documents. A corpus-related ontology generation algorithm is developed to generate the concept structures of documents. Based on two biomedical datasets, we evaluate the proposed method and five other clustering algorithms. The clustering results of the proposed method outperform the five other algorithms, in terms of key concept identification. With respect to the first biomedical dataset, our method has the F-measure values 0.7294 and 0.5294 based on the MeSH ontology and gene ontology (GO), respectively. With respect to the second biomedical dataset, our method has the F-measure values 0.6751 and 0.6746 based on the MeSH ontology and GO, respectively. Both results outperforms the five other algorithms in terms of F-measure. Based on the MeSH ontology and GO, the generated corpus-related ontologies show informative conceptual structures. The proposed method enables users to specify the domain knowledge to exploit the conceptual structures of biomedical document collections. In addition, the proposed method is able to extract the key concepts and cluster the documents with a relatively high precision. Copyright 2010 Elsevier B.V. All rights reserved.

Controlling Salmonella infection in weanling pigs through water delivery of direct-fed microbials or organic acids: Part II. Effects on intestinal histology and active nutrient transport

USDA-ARS?s Scientific Manuscript database

The objective of this study was to evaluate the effects of water-delivered direct-fed microbials (DFM) or organic acids on intestinal morphology and active nutrient absorption in weanling pigs following deliberate Salmonella infection. Pigs (n = 88) were weaned at 19 ± 2 d of age and assigned to one...

The Metabolism of Tetralin in Fischer 344 Rats

DTIC Science & Technology

1986-04-01

evaluated petroleum and shale-derived JP-5, a jet fuel composed of aliphatic and aromatic hydrocarbons with the majority of the straight-chain...much like gasoline. JP-8 is a mixture of hydrocarbons of intermediate boiling point and volatility and is similar to the civilian jet fuel , A-1. DFM...toxicity of conventional versus shale-derived JP-5 jet fuel : Light microscopy, hematologic, and serum chemistry studies. Toxicol Appl Pharmacol, 57

Impact of eliminating fracture intersection nodes in multiphase compositional flow simulation

NASA Astrophysics Data System (ADS)

Walton, Kenneth M.; Unger, Andre J. A.; Ioannidis, Marios A.; Parker, Beth L.

2017-04-01

Algebraic elimination of nodes at discrete fracture intersections via the star-delta technique has proven to be a valuable tool for making multiphase numerical simulations more tractable and efficient. This study examines the assumptions of the star-delta technique and exposes its effects in a 3-D, multiphase context for advective and dispersive/diffusive fluxes. Key issues of relative permeability-saturation-capillary pressure (kr-S-Pc) and capillary barriers at fracture-fracture intersections are discussed. This study uses a multiphase compositional, finite difference numerical model in discrete fracture network (DFN) and discrete fracture-matrix (DFM) modes. It verifies that the numerical model replicates analytical solutions and performs adequately in convergence exercises (conservative and decaying tracer, one and two-phase flow, DFM and DFN domains). The study culminates in simulations of a two-phase laboratory experiment in which a fluid invades a simple fracture intersection. The experiment and simulations evoke different invading fluid flow paths by varying fracture apertures as oil invades water-filled fractures and as water invades air-filled fractures. Results indicate that the node elimination technique as implemented in numerical model correctly reproduces the long-term flow path of the invading fluid, but that short-term temporal effects of the capillary traps and barriers arising from the intersection node are lost.

Evaluating the Informative Quality of Documents in SGML Format from Judgements by Means of Fuzzy Linguistic Techniques Based on Computing with Words.

ERIC Educational Resources Information Center

Herrera-Viedma, Enrique; Peis, Eduardo

2003-01-01

Presents a fuzzy evaluation method of SGML documents based on computing with words. Topics include filtering the amount of information available on the Web to assist users in their search processes; document type definitions; linguistic modeling; user-system interaction; and use with XML and other markup languages. (Author/LRW)

Addition of flexible body option to the TOLA computer program. Part 2: User and programmer documentation

NASA Technical Reports Server (NTRS)

Dick, J. W.; Benda, B. J.

1975-01-01

User and programmer oriented documentation for the flexible body option of the Takeoff and Landing Analysis (TOLA) computer program are provided. The user information provides sufficient knowledge of the development and use of the option to enable the engineering user to successfully operate the modified program and understand the results. The programmer's information describes the option structure and logic enabling a programmer to make major revisions to this part of the TOLA computer program.

VOLTTRON 3.0: User Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lutes, Robert G.; Haack, Jereme N.; Katipamula, Srinivas

This document is a user guide for the deployment of the transactional network platform and agent/application development within VOLTTRON. The intent of this user guide is to provide a description of the functionality of the transactional network platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

VOLTTRON 2.0: User Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lutes, Robert G.; Haack, Jereme N.; Katipamula, Srinivas

This document is a user guide for the deployment of the transactional network platform and agent/application development within VOLTTRON. The intent of this user guide is to provide a description of the functionality of the transactional network platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

Space Segment (SS) and the Navigation User Segment (US) Interface Control Document (ICD)

DOT National Transportation Integrated Search

1993-10-10

This Interface Control Document (ICD) defines the requirements related to the interface between the Space Segment (SS) of the Global Positioning System (GPS) and the Navigation Users Segment of the GPS. 2880k, 154p.

Documentation requirements for Applications Systems Verification and Transfer projects (ASVTs)

NASA Technical Reports Server (NTRS)

Suchy, J. T.

1977-01-01

NASA's Application Systems Verification and Transfer Projects (ASVTs) are deliberate efforts to facilitate the transfer of applications of NASA-developed space technology to users such as federal agencies, state and local governments, regional planning groups, public service institutions, and private industry. This study focused on the role of documentation in facilitating technology transfer both to primary users identified during project planning and to others with similar information needs. It was understood that documentation can be used effectively when it is combined with informal (primarily verbal) communication within each user community and with other formal techniques such as organized demonstrations and training programs. Documentation examples from eight ASVT projects and one potential project were examined to give scope to the investigation.

Poster — Thur Eve — 52: A Web-based Platform for Collaborative Document Management in Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kildea, J.; Joseph, A.

We describe DepDocs, a web-based platform that we have developed to manage the committee meetings, policies, procedures and other documents within our otherwise paperless radiotherapy clinic. DepDocs is essentially a document management system based on the popular Drupal content management software. For security and confidentiality, it is hosted on a linux server internal to our hospital network such that documents are never sent to the cloud or outside of the hospital firewall. We used Drupal's in-built role-based user rights management system to assign a role, and associated document editing rights, to each user. Documents are accessed for viewing using eithermore » a simple Google-like search or by generating a list of related documents from a taxonomy of categorization terms. Our system provides document revision tracking and an document review and approval mechanism for all official policies and procedures. Committee meeting schedules, agendas and minutes are maintained by committee chairs and are restricted to committee members. DepDocs has been operational within our department for over six months and has already 45 unique users and an archive of over 1000 documents, mostly policies and procedures. Documents are easily retrievable from the system using any web browser within our hospital's network.« less

Digitization of medical documents: an X-Windows application for fast scanning.

PubMed

Muñoz, A; Salvador, C H; Gonzalez, M A; Dueñas, A

1992-01-01

This paper deals with digitization, using a commercial scanner, of medical documents as still images for introduction into a computer-based Information System. Document management involves storing, editing and transmission. This task has usually been approached from the perspective of the difficulties posed by radiologic images because of their indisputable qualitative and quantitative significance. However, healthcare activities require the management of many other types of documents and involve the requirements of numerous users. One key to document management will be the availability of a digitizer to deal with the greatest possible number of different types of documents. This paper describes the relevant aspects of documents and the technical specifications that digitizers must fulfill. The concept of document type is introduced as the ideal set of digitizing parameters for a given document. The use of document type parameters can drastically reduce the time the user spends in scanning sessions. Presentation is made of an application based on Unix, X-Windows and OSF/Motif, with a GPIB interface, implemented around the document type concept. Finally, the results of the evaluation of the application are presented, focusing on the user interface, as well as on the viewing of color images in an X-Windows environment and the use of lossy algorithms in the compression of medical images.

Magnetic Signature: Small Arms Testing of Multiple Examples of Same Model Weapons

DTIC Science & Technology

2009-04-01

inside the wooden building, showing a three-axis fluxgate magnetometer , north-south path lines, and instrumentation system...the FVM-400 Vector Fluxgate Magnetometer by Macintyre Electronics Design Associates, Inc. (MEDA) was used and in other cases two DFM100G2 Digital... Fluxgate Magnetometers made by Billingsley Magnetics were used. The majority of the data obtained was done with the latter. The MEDA has a 1 nT

COAL UTILITY EVIRONMENTAL COST (CUECOST) WORKBOOK USER'S MANUAL

EPA Science Inventory

The document is a user's manual for the Coal Utility Environmental Cost (CUECost) workbook (an interrelated set of spreadsheets) and documents its development and the validity of methods used to estimate installed capital ad annualize costs. The CUECost workbook produces rough-or...

Rural applications of advanced traveler information systems : user needs and technology assessment

DOT National Transportation Integrated Search

1997-07-01

The User Needs and Technology Assessment Report is one in a series of interim documents for the Rural Applications of Advanced Traveler Information Systems (ATIS) project. The document describes the research design and findings from rural traveler su...

Biblio-MetReS: A bibliometric network reconstruction application and server

PubMed Central

2011-01-01

Background Reconstruction of genes and/or protein networks from automated analysis of the literature is one of the current targets of text mining in biomedical research. Some user-friendly tools already perform this analysis on precompiled databases of abstracts of scientific papers. Other tools allow expert users to elaborate and analyze the full content of a corpus of scientific documents. However, to our knowledge, no user friendly tool that simultaneously analyzes the latest set of scientific documents available on line and reconstructs the set of genes referenced in those documents is available. Results This article presents such a tool, Biblio-MetReS, and compares its functioning and results to those of other user-friendly applications (iHOP, STRING) that are widely used. Under similar conditions, Biblio-MetReS creates networks that are comparable to those of other user friendly tools. Furthermore, analysis of full text documents provides more complete reconstructions than those that result from using only the abstract of the document. Conclusions Literature-based automated network reconstruction is still far from providing complete reconstructions of molecular networks. However, its value as an auxiliary tool is high and it will increase as standards for reporting biological entities and relationships become more widely accepted and enforced. Biblio-MetReS is an application that can be downloaded from http://metres.udl.cat/. It provides an easy to use environment for researchers to reconstruct their networks of interest from an always up to date set of scientific documents. PMID:21975133

Mission and data operations IBM 360: User's guide

NASA Technical Reports Server (NTRS)

Balakirsky, J.

1971-01-01

The purpose of this manual is to serve as an introduction to the M&DO computer systems and to supplement all other relevant documentation to be referenced. Because of its index structure, the user will be able to reference those sections pertinent to his needs. This is not a programming manual; where a user needs to learn a language or a system, it will be necessary to review the referenced documents.

TORO II: A finite element computer program for nonlinear quasi-static problems in electromagnetics: Part 2, User`s manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gartling, D.K.

User instructions are given for the finite element, electromagnetics program, TORO II. The theoretical background and numerical methods used in the program are documented in SAND95-2472. The present document also describes a number of example problems that have been analyzed with the code and provides sample input files for typical simulations. 20 refs., 34 figs., 3 tabs.

An automatically updateable web publishing solution: taking document sharing and conversion to enterprise level

NASA Astrophysics Data System (ADS)

Rahman, Fuad; Tarnikova, Yuliya; Hartono, Rachmat; Alam, Hassan

2006-01-01

This paper presents a novel automatic web publishing solution, Pageview (R). PageView (R) is a complete working solution for document processing and management. The principal aim of this tool is to allow workgroups to share, access and publish documents on-line on a regular basis. For example, assuming that a person is working on some documents. The user will, in some fashion, organize his work either in his own local directory or in a shared network drive. Now extend that concept to a workgroup. Within a workgroup, some users are working together on some documents, and they are saving them in a directory structure somewhere on a document repository. The next stage of this reasoning is that a workgroup is working on some documents, and they want to publish them routinely on-line. Now it may happen that they are using different editing tools, different software, and different graphics tools. The resultant documents may be in PDF, Microsoft Office (R), HTML, or Word Perfect format, just to name a few. In general, this process needs the documents to be processed in a fashion so that they are in the HTML format, and then a web designer needs to work on that collection to make them available on-line. PageView (R) takes care of this whole process automatically, making the document workflow clean and easy to follow. PageView (R) Server publishes documents, complete with the directory structure, for online use. The documents are automatically converted to HTML and PDF so that users can view the content without downloading the original files, or having to download browser plug-ins. Once published, other users can access the documents as if they are accessing them from their local folders. The paper will describe the complete working system and will discuss possible applications within the document management research.

Document similarity measures and document browsing

NASA Astrophysics Data System (ADS)

Ahmadullin, Ildus; Fan, Jian; Damera-Venkata, Niranjan; Lim, Suk Hwan; Lin, Qian; Liu, Jerry; Liu, Sam; O'Brien-Strain, Eamonn; Allebach, Jan

2011-03-01

Managing large document databases is an important task today. Being able to automatically com- pare document layouts and classify and search documents with respect to their visual appearance proves to be desirable in many applications. We measure single page documents' similarity with respect to distance functions between three document components: background, text, and saliency. Each document component is represented as a Gaussian mixture distribution; and distances between dierent documents' components are calculated as probabilistic similarities between corresponding distributions. The similarity measure between documents is represented as a weighted sum of the components' distances. Using this document similarity measure, we propose a browsing mechanism operating on a document dataset. For these purposes, we use a hierarchical browsing environment which we call the document similarity pyramid. It allows the user to browse a large document dataset and to search for documents in the dataset that are similar to the query. The user can browse the dataset on dierent levels of the pyramid, and zoom into the documents that are of interest.

[Development and integration of the Oncological Documentation System ODS].

PubMed

Raab, G; van Den Bergh, M

2001-08-01

To simplify clinical routine and to improve medical quality without exceeding the existing resources. Intensifying communication and cooperation between all institutions of patients' health care. The huge amount of documentation work of physicians can no longer be done without modern tools of paperless data processing. The development of ODS was a tight cooperation between physician and technician which resulted in a mutual understanding and led to a high level of user convenience. - At present all cases of gynecology, especially gynecologic oncology can be documented and processed by ODS. Users easily will adopt the system as data entry within different program areas follows the same rules. In addition users can choose between an individual input of data and assistants guiding them through highly specific areas of documentation. ODS is a modern, modular structured and very fast multiuser database environment for in- and outpatient documentation. It automatically generates a lot of reports for clinical day to day business. Statistical routines will help the user reflecting his work and its quality. Documentation of clinical trials according to the GCP guidelines can be done by ODS using the internet or offline datasharing. As ODS is the synthesis of a computer based patient administration system and an oncological documentation database, it represents the basis for the construction of the electronical patient chart as well as the digital documentation of clinical trials. The introduction of this new technology to physicians and nurses has to be done slowly and carefully, in order to increase motivation and to improve the results.

VisIRR: A Visual Analytics System for Information Retrieval and Recommendation for Large-Scale Document Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choo, Jaegul; Kim, Hannah; Clarkson, Edward

In this paper, we present an interactive visual information retrieval and recommendation system, called VisIRR, for large-scale document discovery. VisIRR effectively combines the paradigms of (1) a passive pull through query processes for retrieval and (2) an active push that recommends items of potential interest to users based on their preferences. Equipped with an efficient dynamic query interface against a large-scale corpus, VisIRR organizes the retrieved documents into high-level topics and visualizes them in a 2D space, representing the relationships among the topics along with their keyword summary. In addition, based on interactive personalized preference feedback with regard to documents,more » VisIRR provides document recommendations from the entire corpus, which are beyond the retrieved sets. Such recommended documents are visualized in the same space as the retrieved documents, so that users can seamlessly analyze both existing and newly recommended ones. This article presents novel computational methods, which make these integrated representations and fast interactions possible for a large-scale document corpus. We illustrate how the system works by providing detailed usage scenarios. Finally, we present preliminary user study results for evaluating the effectiveness of the system.« less

VisIRR: A Visual Analytics System for Information Retrieval and Recommendation for Large-Scale Document Data

DOE PAGES

Choo, Jaegul; Kim, Hannah; Clarkson, Edward; ...

2018-01-31

In this paper, we present an interactive visual information retrieval and recommendation system, called VisIRR, for large-scale document discovery. VisIRR effectively combines the paradigms of (1) a passive pull through query processes for retrieval and (2) an active push that recommends items of potential interest to users based on their preferences. Equipped with an efficient dynamic query interface against a large-scale corpus, VisIRR organizes the retrieved documents into high-level topics and visualizes them in a 2D space, representing the relationships among the topics along with their keyword summary. In addition, based on interactive personalized preference feedback with regard to documents,more » VisIRR provides document recommendations from the entire corpus, which are beyond the retrieved sets. Such recommended documents are visualized in the same space as the retrieved documents, so that users can seamlessly analyze both existing and newly recommended ones. This article presents novel computational methods, which make these integrated representations and fast interactions possible for a large-scale document corpus. We illustrate how the system works by providing detailed usage scenarios. Finally, we present preliminary user study results for evaluating the effectiveness of the system.« less

HKHC Community Dashboard: design, development, and function of a Web-based performance monitoring system.

PubMed

Bors, Philip A; Kemner, Allison; Fulton, John; Stachecki, Jessica; Brennan, Laura K

2015-01-01

As part of Robert Wood Johnson Foundation's Healthy Kids, Healthy Communities (HKHC) national grant program, a technical assistance team designed the HKHC Community Dashboard, an online progress documentation and networking system. The Dashboard was central to HKHC's multimethod program evaluation and became a communication interface for grantees and technical assistance providers. The Dashboard was designed through an iterative process of identifying needs and priorities; designing the user experience, technical development, and usability testing; and applying visual design. The system was created with an open-source content management system and support for building an online community of users. The site developer trained technical assistance providers at the national program office and evaluators, who subsequently trained all 49 grantees. Evaluators provided support for Dashboard users and populated the site with the bulk of its uploaded tools and resource documents. The system tracked progress through an interactive work plan template, regular documentation by local staff and partners, and data coding and analysis by the evaluation team. Other features included the ability to broadcast information to Dashboard users via e-mail, event calendars, discussion forums, private messaging, a resource clearinghouse, a technical assistance diary, and real-time progress reports. The average number of Dashboard posts was 694 per grantee during the grant period. Technical assistance providers and grantees uploaded a total of 1304 resource documents. The Dashboard functions with the highest grantee satisfaction were its interfaces for sharing and progress documentation. A majority of Dashboard users (69%) indicated a preference for continued access to the Dashboard's uploaded resource documents. The Dashboard was a useful and innovative tool for participatory evaluation of a large national grant program. While progress documentation added some burden to local project staff, the system proved to be a useful resource-sharing technology.

Purple Computational Environment With Mappings to ACE Requirements for the General Availability User Environment Capabilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barney, B; Shuler, J

2006-08-21

Purple is an Advanced Simulation and Computing (ASC) funded massively parallel supercomputer located at Lawrence Livermore National Laboratory (LLNL). The Purple Computational Environment documents the capabilities and the environment provided for the FY06 LLNL Level 1 General Availability Milestone. This document describes specific capabilities, tools, and procedures to support both local and remote users. The model is focused on the needs of the ASC user working in the secure computing environments at Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and Sandia National Laboratories, but also documents needs of the LLNL and Alliance users working in the unclassified environment. Additionally,more » the Purple Computational Environment maps the provided capabilities to the Trilab ASC Computing Environment (ACE) Version 8.0 requirements. The ACE requirements reflect the high performance computing requirements for the General Availability user environment capabilities of the ASC community. Appendix A lists these requirements and includes a description of ACE requirements met and those requirements that are not met for each section of this document. The Purple Computing Environment, along with the ACE mappings, has been issued and reviewed throughout the Tri-lab community.« less

Putting Home Data Management into Perspective

DTIC Science & Technology

2009-12-01

approaches. However, users of home and personal storage live it. Popular interfaces (e.g., iTunes , iPhoto, and even drop-down lists of recently...users of home and personal storage live it. Popular interfaces (e.g., iTunes , iPhoto, and even drop-down lists of recently-opened Word documents...live it. Popular interfaces (e.g., iTunes , iPhoto, and even drop- down lists of recently-opened Word documents) allow users to navigate file

Documenting clinical pharmacist intervention before and after the introduction of a web-based tool.

PubMed

Nurgat, Zubeir A; Al-Jazairi, Abdulrazaq S; Abu-Shraie, Nada; Al-Jedai, Ahmed

2011-04-01

To develop a database for documenting pharmacist intervention through a web-based application. The secondary endpoint was to determine if the new, web-based application provides any benefits with regards to documentation compliance by clinical pharmacists and ease of calculating cost savings compared with our previous method of documenting pharmacist interventions. A tertiary care hospital in Saudi Arabia. The documentation of interventions using a web-based documentation application was retrospectively compared with previous methods of documentation of clinical pharmacists' interventions (multi-user PC software). The number and types of interventions recorded by pharmacists, data mining of archived data, efficiency, cost savings, and the accuracy of the data generated. The number of documented clinical interventions increased from 4,926, using the multi-user PC software, to 6,840 for the web-based application. On average, we observed 653 interventions per clinical pharmacist using the web-based application, which showed an increase compared to an average of 493 interventions using the old multi-user PC software. However, using a paired Student's t-test there was no statistical significance difference between the two means (P = 0.201). Using a χ² test, which captured management level and the type of system used, we found a strong effect of management level (P < 2.2 × 10⁻¹⁶) on the number of documented interventions. We also found a moderately significant relationship between educational level and the number of interventions documented (P = 0.045). The mean ± SD time required to document an intervention using the web-based application was 66.55 ± 8.98 s. Using the web-based application, 29.06% of documented interventions resulted in cost-savings, while using the multi-user PC software only 4.75% of interventions did so. The majority of cost savings across both platforms resulted from the discontinuation of unnecessary drugs and a change in dosage regimen. Data collection using the web-based application was consistently more complete when compared to the multi-user PC software. The web-based application is an efficient system for documenting pharmacist interventions. Its flexibility and accessibility, as well as its detailed report functionality is a useful tool that will hopefully encourage other primary and secondary care facilities to adopt similar applications.

LLCEDATA and LLCECALC for Windows version 1.0, Volume 1: User`s manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

McFadden, J.G.

LLCEDATA and LLCECALC for Windows are user-friendly computer software programs that work together to determine the proper waste designation, handling, and disposition requirements for Long Length Contaminated Equipment (LLCE). LLCEDATA reads from a variety of data bases to produce an equipment data file (EDF) that represents a snapshot of both the LLCE and the tank it originates from. LLCECALC reads the EDF and a gamma assay (AV2) file that is produced by the Flexible Receiver Gamma Energy Analysis System. LLCECALC performs corrections to the AV2 file as it is being read and characterizes the LLCE. Both programs produce a varietymore » of reports, including a characterization report and a status report. The status report documents each action taken by the user, LLCEDATA, and LLCECALC. Documentation for LLCEDATA and LLCECALC for Windows is available in three volumes. Volume 1 is a user`s manual, which is intended as a quick reference for both LLCEDATA and LLCECALC. Volume 2 is a technical manual, and Volume 3 is a software verification and validation document.« less

BASINs 4.0 Climate Assessment Tool (CAT): Supporting Documentation and User's Manual (Final Report)

EPA Science Inventory

EPA announced the availability of the report, BASINS 4.0 Climate Assessment Tool (CAT): Supporting Documentation and User's Manual. This report was prepared by the EPA's Global Change Research Program (GCRP), an assessment-oriented program, that sits within the Office of R...

STEVE -- User Guide and Reference Manual

NASA Astrophysics Data System (ADS)

Fish, Adrian

This document describes an extended version of the EVE editor that has been tailored to the general Starlink user's requirements. This extended editor is STarlink Eve or STEve, and this document (along with it's introductory companion SUN/125) describes this editor, and offers additional help, advice and tips on general EVE usage.

Lehigh River Basin, Trexler Lake, Jordan Creek, Pennsylvania. Final Environmental Impact Statement.

DTIC Science & Technology

1973-01-01

InI w-.ater table elevations in the project arra . A lmg in lnn( uti lization from prim-arily private ag-ricultural and] res ident iil.rr’ to nubli c...AND ADDRESS 10. PROGRAM ELEMENT, PROJECT , TASK U.S. Army Engineer District Philadelphia AREA & WORK UNIT NUMBERS 2nd & Chestnut Sts. / I Philadelphia...Administrative ( ) Legislative 2. Description of Action. The Trexler project is located in Lehigh County in southeastern Pennsylvania. The dfm site is

Photoacoustic infrared spectroscopy for conducting gas tracer tests and measuring water saturations in landfills.

PubMed

Jung, Yoojin; Han, Byunghyun; Mostafid, M Erfan; Chiu, Pei; Yazdani, Ramin; Imhoff, Paul T

2012-02-01

Gas tracer tests can be used to determine gas flow patterns within landfills, quantify volatile contaminant residence time, and measure water within refuse. While gas chromatography (GC) has been traditionally used to analyze gas tracers in refuse, photoacoustic spectroscopy (PAS) might allow real-time measurements with reduced personnel costs and greater mobility and ease of use. Laboratory and field experiments were conducted to evaluate the efficacy of PAS for conducting gas tracer tests in landfills. Two tracer gases, difluoromethane (DFM) and sulfur hexafluoride (SF(6)), were measured with a commercial PAS instrument. Relative measurement errors were invariant with tracer concentration but influenced by background gas: errors were 1-3% in landfill gas but 4-5% in air. Two partitioning gas tracer tests were conducted in an aerobic landfill, and limits of detection (LODs) were 3-4 times larger for DFM with PAS versus GC due to temporal changes in background signals. While higher LODs can be compensated by injecting larger tracer mass, changes in background signals increased the uncertainty in measured water saturations by up to 25% over comparable GC methods. PAS has distinct advantages over GC with respect to personnel costs and ease of use, although for field applications GC analyses of select samples are recommended to quantify instrument interferences. Copyright © 2011 Elsevier Ltd. All rights reserved.

Evaluation of a PCR Test for Detection of Treponema pallidum in Swabs and Blood

PubMed Central

Grange, P. A.; Gressier, L.; Dion, P. L.; Farhi, D.; Benhaddou, N.; Gerhardt, P.; Morini, J. P.; Deleuze, J.; Pantoja, C.; Bianchi, A.; Lassau, F.; Avril, M. F.; Janier, M.

2012-01-01

Syphilis diagnosis is based on clinical observation, serological analysis, and dark-field microscopy (DFM) detection of Treponema pallidum subsp. pallidum, the etiological agent of syphilis, in skin ulcers. We performed a nested PCR (nPCR) assay specifically amplifying the tpp47 gene of T. pallidum from swab and blood specimens. We studied a cohort of 294 patients with suspected syphilis and 35 healthy volunteers. Eighty-seven of the 294 patients had primary syphilis, 103 had secondary syphilis, 40 had latent syphilis, and 64 were found not to have syphilis. The T. pallidum nPCR results for swab specimens were highly concordant with syphilis diagnosis, with a sensitivity of 82% and a specificity of 95%. Reasonable agreement was observed between the results obtained with the nPCR and DFM methods (kappa = 0.53). No agreement was found between the nPCR detection of T. pallidum in blood and the diagnosis of syphilis, with sensitivities of 29, 18, 14.7, and 24% and specificities of 96, 92, 93, and 97% for peripheral blood mononuclear cell (PBMC), plasma, serum, and whole-blood fractions, respectively. HIV status did not affect the frequency of T. pallidum detection in any of the specimens tested. Swab specimens from mucosal or skin lesions seemed to be more useful than blood for the efficient detection of the T. pallidum genome and, thus, for the diagnosis of syphilis. PMID:22219306

Confocal Raman microspectroscopic study of folate receptor-targeted delivery of 6-mercaptopurine-embedded gold nanoparticles in a single cell.

PubMed

Park, Jin; Jeon, Won Il; Lee, So Yeong; Ock, Kwang-Su; Seo, Ji Hye; Park, Jinho; Ganbold, Erdene-Ochir; Cho, Keunchang; Song, Nam Woong; Joo, Sang-Woo

2012-05-01

We investigate the cellular uptake behaviors and efficacy of folate-coated gold nanoparticles (AuNPs) for the targeted drug delivery system in human cancer cells. Folate-conjugated AuNPs embedded with a purine analogue cancer drug of 6-mercaptopurine (6MP) were assembled via a 1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride (EDC) coupling reaction between the amino group of 4-aminobenzenethiol (ABT) and the carboxyl group of folic acid. The assembly of folate and 6MP on AuNPs has been examined by absorption spectroscopy, transmission electron microscopy (TEM), and confocal Raman spectroscopy. The internalization of the conjugated AuNPs inside the folate receptor-positive HeLa and KB cells was checked by TEM and dark-field microscopy (DFM) combined with label-free confocal spectroscopy over the depth variable z at a micrometer resolution. DFM live cell imaging of folate-conjugated AuNPs in HeLa cells indicated that the targeted AuNPs appeared to attach on the cell surfaces and enter into the cell with an hour. The cell viability was also compared to estimate the efficacy of folate-conjugated AuNP delivery systems. Folate receptor-targeted AuNP systems appeared to decrease cancer cell viability both in vitro and in vivo more than did the use of the 6MP-coated AuNPs drug without any targeting systems. Copyright © 2012 Wiley Periodicals, Inc.

Numerical study of single and two interacting turbulent plumes in atmospheric cross flow

NASA Astrophysics Data System (ADS)

Mokhtarzadeh-Dehghan, M. R.; König, C. S.; Robins, A. G.

The paper presents a numerical study of two interacting full-scale dry plumes issued into neutral boundary layer cross flow. The study simulates plumes from a mechanical draught cooling tower. The plumes are placed in tandem or side-by-side. Results are first presented for plumes with a density ratio of 0.74 and plume-to-crosswind speed ratio of 2.33, for which data from a small-scale wind tunnel experiment were available and were used to assess the accuracy of the numerical results. Further results are then presented for the more physically realistic density ratio of 0.95, maintaining the same speed ratio. The sensitivity of the results with respect to three turbulence models, namely, the standard k- ɛ model, the RNG k- ɛ model and the Differential Flux Model (DFM) is presented. Comparisons are also made between the predicted rise height and the values obtained from existing integral models. The formation of two counter-rotating vortices is well predicted. The results show good agreement for the rise height predicted by different turbulence models, but the DFM predicts temperature profiles more accurately. The values of predicted rise height are also in general agreement. However, discrepancies between the present results for the rise height for single and multiple plumes and the values obtained from known analytical relations are apparent and possible reasons for these are discussed.

Fabrication of a highly oriented line structure on an aluminum surface and the nanoscale patterning on the nanoscale structure using highly functional molecules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watanabe, Y.; Kato, H.; Takemura, S.

2009-07-15

The surface of an Al plate was treated with a combination of chemical and electrochemical processes for fabrication of surface nanoscale structures on Al plates. Chemical treatments by using acetone and pure water under supersonic waves were conducted on an Al surface. Additional electrochemical process in H{sub 2}SO{sub 4} solution created a finer and oriented nanoscale structure on the Al surface. Dynamic force microscopy (DFM) measurement clarified that the nanoscale highly oriented line structure was successfully created on the Al surface. The line distance was estimated approximately 30-40 nm. At the next stage, molecular patterning on the highly oriented linemore » structure by functional molecules such as copper phthalocyanine (CuPc) and fullerene C{sub 60} was also conducted. CuPc or C{sub 60} molecules were deposited on the highly oriented line structure on Al. A toluene droplet containing CuPc molecules was cast on the nanostructured Al plate and was extended on the surface. CuPc or C{sub 60} deposition on the nanostructured Al surface proceeded by evaporation of toluene. DFM and x-ray photoemission spectroscopy measurements demonstrated that a unique molecular pattern was fabricated so that the highly oriented groove channels were filled with the functional molecules.« less

Ground Software Maintenance Facility (GSMF) user's manual

NASA Technical Reports Server (NTRS)

Aquila, V.; Derrig, D.; Griffith, G.

1986-01-01

Instructions for the Ground Software Maintenance Facility (GSMF) system user is provided to operate the GSMF in all modes. The GSMF provides the resources for the Automatic Test Equipment (ATE) computer program maintenance (GCOS and GOAL). Applicable reference documents are listed. An operational overview and descriptions of the modes in terms of operator interface, options, equipment, material utilization, and operational procedures are contained. Test restart procedures are described. The GSMF documentation tree is presented including the user manual.

Space Communication Artificial Intelligence for Link Evaluation Terminal (SCAILET)

NASA Technical Reports Server (NTRS)

Shahidi, Anoosh K.; Schlegelmilch, Richard F.; Petrik, Edward J.; Walters, Jerry L.

1992-01-01

A software application to assist end-users of the high burst rate (HBR) link evaluation terminal (LET) for satellite communications is being developed. The HBR LET system developed at NASA Lewis Research Center is an element of the Advanced Communications Technology Satellite (ACTS) Project. The HBR LET is divided into seven major subsystems, each with its own expert. Programming scripts, test procedures defined by design engineers, set up the HBR LET system. These programming scripts are cryptic, hard to maintain and require a steep learning curve. These scripts were developed by the system engineers who will not be available for the end-users of the system. To increase end-user productivity a friendly interface needs to be added to the system. One possible solution is to provide the user with adequate documentation to perform the needed tasks. With the complexity of this system the vast amount of documentation needed would be overwhelming and the information would be hard to retrieve. With limited resources, maintenance is another reason for not using this form of documentation. An advanced form of interaction is being explored using current computer techniques. This application, which incorporates a combination of multimedia and artificial intelligence (AI) techniques to provided end-users with an intelligent interface to the HBR LET system, is comprised of an intelligent assistant, intelligent tutoring, and hypermedia documentation. The intelligent assistant and tutoring systems address the critical programming needs of the end-user.

Software Tools Streamline Project Management

NASA Technical Reports Server (NTRS)

2009-01-01

Three innovative software inventions from Ames Research Center (NETMARK, Program Management Tool, and Query-Based Document Management) are finding their way into NASA missions as well as industry applications. The first, NETMARK, is a program that enables integrated searching of data stored in a variety of databases and documents, meaning that users no longer have to look in several places for related information. NETMARK allows users to search and query information across all of these sources in one step. This cross-cutting capability in information analysis has exponentially reduced the amount of time needed to mine data from days or weeks to mere seconds. NETMARK has been used widely throughout NASA, enabling this automatic integration of information across many documents and databases. NASA projects that use NETMARK include the internal reporting system and project performance dashboard, Erasmus, NASA s enterprise management tool, which enhances organizational collaboration and information sharing through document routing and review; the Integrated Financial Management Program; International Space Station Knowledge Management; Mishap and Anomaly Information Reporting System; and management of the Mars Exploration Rovers. Approximately $1 billion worth of NASA s projects are currently managed using Program Management Tool (PMT), which is based on NETMARK. PMT is a comprehensive, Web-enabled application tool used to assist program and project managers within NASA enterprises in monitoring, disseminating, and tracking the progress of program and project milestones and other relevant resources. The PMT consists of an integrated knowledge repository built upon advanced enterprise-wide database integration techniques and the latest Web-enabled technologies. The current system is in a pilot operational mode allowing users to automatically manage, track, define, update, and view customizable milestone objectives and goals. The third software invention, Query-Based Document Management (QBDM) is a tool that enables content or context searches, either simple or hierarchical, across a variety of databases. The system enables users to specify notification subscriptions where they associate "contexts of interest" and "events of interest" to one or more documents or collection(s) of documents. Based on these subscriptions, users receive notification when the events of interest occur within the contexts of interest for associated document or collection(s) of documents. Users can also associate at least one notification time as part of the notification subscription, with at least one option for the time period of notifications.

Information Management Platform for Data Analytics and Aggregation (IMPALA) System Design Document

NASA Technical Reports Server (NTRS)

Carnell, Andrew; Akinyelu, Akinyele

2016-01-01

The System Design document tracks the design activities that are performed to guide the integration, installation, verification, and acceptance testing of the IMPALA Platform. The inputs to the design document are derived from the activities recorded in Tasks 1 through 6 of the Statement of Work (SOW), with the proposed technical solution being the completion of Phase 1-A. With the documentation of the architecture of the IMPALA Platform and the installation steps taken, the SDD will be a living document, capturing the details about capability enhancements and system improvements to the IMPALA Platform to provide users in development of accurate and precise analytical models. The IMPALA Platform infrastructure team, data architecture team, system integration team, security management team, project manager, NASA data scientists and users are the intended audience of this document. The IMPALA Platform is an assembly of commercial-off-the-shelf (COTS) products installed on an Apache-Hadoop platform. User interface details for the COTS products will be sourced from the COTS tools vendor documentation. The SDD is a focused explanation of the inputs, design steps, and projected outcomes of every design activity for the IMPALA Platform through installation and validation.

Long Duration Exposure Facility Mini-Data Base User`s Guide: Macintosh version. (Diskette)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bohnhoff-Hlavacek, G.; Pippin, H.G.; Dursch, H.W.

1995-04-01

One of the objectives of the LDEF Special Investigation Group (SIG) was to develop a LDEF data base that identifies the experiment objectives and hardware flown, summarizes results and conclusions, and provides a system analysis overview, including spacecraft design guidelines and space environmental effects. Compiling the information into an easily accessible data base format, and making it available to the space community was a major task accomplished by the System and Materials SIG effort beginning in 1981. Included in this document is a short user`s manual for the LDEF Mini-Data Bases. The user`s manual contains pertinent examples from the datamore » base on specifically how to access and work with the LDEF information. Accompanying this document are the mini-data bases on disk.« less

Aviation System Analysis Capability Quick Response System Report Server User’s Guide.

DTIC Science & Technology

1996-10-01

primary data sources for the QRS Report Server are the following: ♦ United States Department of Transportation airline service quality per- formance...and to cross-reference sections of this document. is used to indicate quoted text messages from WWW pages. is used for WWW page and section titles...would link the user to another document or another section of the same document. ALL CAPS is used to indicate Report Server variables for which the

Tags Extarction from Spatial Documents in Search Engines

NASA Astrophysics Data System (ADS)

Borhaninejad, S.; Hakimpour, F.; Hamzei, E.

2015-12-01

Nowadays the selective access to information on the Web is provided by search engines, but in the cases which the data includes spatial information the search task becomes more complex and search engines require special capabilities. The purpose of this study is to extract the information which lies in spatial documents. To that end, we implement and evaluate information extraction from GML documents and a retrieval method in an integrated approach. Our proposed system consists of three components: crawler, database and user interface. In crawler component, GML documents are discovered and their text is parsed for information extraction; storage. The database component is responsible for indexing of information which is collected by crawlers. Finally the user interface component provides the interaction between system and user. We have implemented this system as a pilot system on an Application Server as a simulation of Web. Our system as a spatial search engine provided searching capability throughout the GML documents and thus an important step to improve the efficiency of search engines has been taken.

Human computer interface guide, revision A

NASA Technical Reports Server (NTRS)

1993-01-01

The Human Computer Interface Guide, SSP 30540, is a reference document for the information systems within the Space Station Freedom Program (SSFP). The Human Computer Interface Guide (HCIG) provides guidelines for the design of computer software that affects human performance, specifically, the human-computer interface. This document contains an introduction and subparagraphs on SSFP computer systems, users, and tasks; guidelines for interactions between users and the SSFP computer systems; human factors evaluation and testing of the user interface system; and example specifications. The contents of this document are intended to be consistent with the tasks and products to be prepared by NASA Work Package Centers and SSFP participants as defined in SSP 30000, Space Station Program Definition and Requirements Document. The Human Computer Interface Guide shall be implemented on all new SSFP contractual and internal activities and shall be included in any existing contracts through contract changes. This document is under the control of the Space Station Control Board, and any changes or revisions will be approved by the deputy director.

Payload Documentation Enhancement Project

NASA Technical Reports Server (NTRS)

Brown, Betty G.

1999-01-01

In late 1998, the Space Shuttle Program recognized a need to revitalize its payload accommodations documentation. As a result a payload documentation enhancement project was initiated to review and update payload documentation and improve the accessibility to that documentation by the Space Shuttle user community.

Applying Minimal Manual Principles for Documentation of Graphical User Interfaces.

ERIC Educational Resources Information Center

Nowaczyk, Ronald H.; James, E. Christopher

1993-01-01

Investigates the need to include computer screens in documentation for software using a graphical user interface. Describes the uses and purposes of "minimal manuals" and their principles. Studies student reaction to their use of one of three on-screen manuals: screens, icon, and button. Finds some benefit for including icon and button…

A User-Centered View of Document Delivery and Interlibrary Loan.

ERIC Educational Resources Information Center

Martin, Harry S., III; Kendrick, Curtis L.

1994-01-01

Discusses reasons why libraries are being forced to seek new forms of information storage. A hypothetical scenario of user-initiated document delivery alternatives integrated with a search process used by a professor using the Harvard OnLine Library Information System is presented. Extensive notes elaborate on the process and the technology…

26 CFR 1.861-18 - Classification of transactions involving computer programs.

Code of Federal Regulations, 2014 CFR

2014-04-01

... income. In the case of a transfer of a copyrighted article, this section provides rules for determining... purposes of this paragraph (a)(3), a computer program includes any media, user manuals, documentation, data base or similar item if the media, user manuals, documentation, data base or similar item is incidental...

26 CFR 1.861-18 - Classification of transactions involving computer programs.

Code of Federal Regulations, 2013 CFR

2013-04-01

... income. In the case of a transfer of a copyrighted article, this section provides rules for determining... purposes of this paragraph (a)(3), a computer program includes any media, user manuals, documentation, data base or similar item if the media, user manuals, documentation, data base or similar item is incidental...

26 CFR 1.861-18 - Classification of transactions involving computer programs.

Code of Federal Regulations, 2012 CFR

2012-04-01

... income. In the case of a transfer of a copyrighted article, this section provides rules for determining... purposes of this paragraph (a)(3), a computer program includes any media, user manuals, documentation, data base or similar item if the media, user manuals, documentation, data base or similar item is incidental...

Global Document Delivery, User Studies, and Service Evaluation: The Gateway Experience

ERIC Educational Resources Information Center

Miller, Rush; Xu, Hong; Zou, Xiuying

2008-01-01

This study examines user and service data from 2002-2006 at the East Asian Gateway Service for Chinese and Korean Academic Journal Publications (Gateway Service), the University of Pittsburgh. Descriptive statistical analysis reveals that the Gateway Service has been consistently playing the leading role in global document delivery service as well…

Tools Used to Evaluate Written Medicine and Health Information: Document and User Perspectives

ERIC Educational Resources Information Center

Luk, Alice; Aslani, Parisa

2011-01-01

This study aims to identify and review tools used to evaluate consumer-oriented written medicine (WMI) and health (WHI) information from a document and user perspective. Articles that met the following inclusion criteria were reviewed: studies evaluating readability, presentation, suitability, quality of WMI/WHI. A total of 152 articles were…

MAMA- User Feedback and Training Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Porter, Reid B.; Ruggiero, Christy E.

2014-05-21

This document describes the current state of the MAMA (Morphological Analysis of Materials) software user identified bugs, issues, and requests for improvements. It also lists Current users and current training methods.

Analysis of PubMed User Sessions Using a Full-Day PubMed Query Log: A Comparison of Experienced and Nonexperienced PubMed Users

PubMed Central

2015-01-01

Background PubMed is the largest biomedical bibliographic information source on the Internet. PubMed has been considered one of the most important and reliable sources of up-to-date health care evidence. Previous studies examined the effects of domain expertise/knowledge on search performance using PubMed. However, very little is known about PubMed users’ knowledge of information retrieval (IR) functions and their usage in query formulation. Objective The purpose of this study was to shed light on how experienced/nonexperienced PubMed users perform their search queries by analyzing a full-day query log. Our hypotheses were that (1) experienced PubMed users who use system functions quickly retrieve relevant documents and (2) nonexperienced PubMed users who do not use them have longer search sessions than experienced users. Methods To test these hypotheses, we analyzed PubMed query log data containing nearly 3 million queries. User sessions were divided into two categories: experienced and nonexperienced. We compared experienced and nonexperienced users per number of sessions, and experienced and nonexperienced user sessions per session length, with a focus on how fast they completed their sessions. Results To test our hypotheses, we measured how successful information retrieval was (at retrieving relevant documents), represented as the decrease rates of experienced and nonexperienced users from a session length of 1 to 2, 3, 4, and 5. The decrease rate (from a session length of 1 to 2) of the experienced users was significantly larger than that of the nonexperienced groups. Conclusions Experienced PubMed users retrieve relevant documents more quickly than nonexperienced PubMed users in terms of session length. PMID:26139516

Impact of incomplete correspondence between document titles and texts on users' representations: a cognitive and linguistic analysis based on 25 technical documents.

PubMed

Eyrolle, Hélène; Virbel, Jacques; Lemarié, Julie

2008-03-01

Based on previous research in the field of cognitive psychology, highlighting the facilitatory effects of titles on several text-related activities, this paper looks at the extent to which titles reflect text content. An exploratory study of real-life technical documents investigated the content of their Subject lines, which linguistic analyses had led us to regard as titles. The study showed that most of the titles supplied by the writers failed to represent the documents' contents and that most users failed to detect this lack of validity.

Disk Operating System User's Guide

DOT National Transportation Integrated Search

1972-05-01

This document serves the purpose of bringing together in one place most of the information a user needs to use the DDP-516 Disk Operating System, (DOS). DOS is a core resident, one user, console-oriented operating system which allows the user to cont...

User's guide to the MESOI diffusion model and to the utility programs UPDATE and LOGRVU

DOE Office of Scientific and Technical Information (OSTI.GOV)

Athey, G.F.; Allwine, K.J.; Ramsdell, J.V.

MESOI is an interactive, Lagrangian puff trajectory diffusion model. The model is documented separately (Ramsdell and Athey, 1981); this report is intended to provide MESOI users with the information needed to successfully conduct model simulations. The user is also provided with guidance in the use of the data file maintenance and review programs; UPDATE and LOGRVU. Complete examples are given for the operaton of all three programs and an appendix documents UPDATE and LOGRVU.

Kepler Data Release 4 Notes

NASA Technical Reports Server (NTRS)

Van Cleve, Jeffrey (Editor); Jenkins, Jon; Caldwell, Doug; Allen, Christopher L.; Batalha, Natalie; Bryson, Stephen T.; Chandrasekaran, Hema; Clarke, Bruce D.; Cote, Miles T.; Dotson, Jessie L.;

Breaking the Silos: The art Documentation Suite

NASA Astrophysics Data System (ADS)

Kutschke, Robert K.

2015-12-01

The art event-processing framework is used by almost all new experiments at Fermilab, and by several outside of Fermilab. All use art as an external product in the same sense that the compiler, ROOT, Geant4, CLHEP and boost are external products. The art team has embarked on a campaign to document art and develop training materials for new users. Many new users of art have little or no knowledge of C++, software engineering, build systems or the many external packages used by art or their experiments, such as ROOT, CLHEP, HEPPDT, and boost. To effectively teach art requires that the training materials include appropriate introductions to these topics as they are encountered. Experience has shown that simply referring readers to the existing native documentation does not work; too often a simple idea that they need to understand is described in a context that presumes prerequisites that are unimportant for a beginning user of art. There is the additional complication that the training materials must be presented in a way that does not presume knowledge of any of the experiments using art. Finally, new users of art arrive at random times throughout the year and the training materials must allow them to start to learn art at any time. This presentation will explain the strategies adopted by the art team to develop a documentation suite that complies with these boundary conditions. It will also show the present status of the documentation suite, including feedback the art team has received from pilot users.

Marky: a tool supporting annotation consistency in multi-user and iterative document annotation projects.

PubMed

Pérez-Pérez, Martín; Glez-Peña, Daniel; Fdez-Riverola, Florentino; Lourenço, Anália

2015-02-01

Document annotation is a key task in the development of Text Mining methods and applications. High quality annotated corpora are invaluable, but their preparation requires a considerable amount of resources and time. Although the existing annotation tools offer good user interaction interfaces to domain experts, project management and quality control abilities are still limited. Therefore, the current work introduces Marky, a new Web-based document annotation tool equipped to manage multi-user and iterative projects, and to evaluate annotation quality throughout the project life cycle. At the core, Marky is a Web application based on the open source CakePHP framework. User interface relies on HTML5 and CSS3 technologies. Rangy library assists in browser-independent implementation of common DOM range and selection tasks, and Ajax and JQuery technologies are used to enhance user-system interaction. Marky grants solid management of inter- and intra-annotator work. Most notably, its annotation tracking system supports systematic and on-demand agreement analysis and annotation amendment. Each annotator may work over documents as usual, but all the annotations made are saved by the tracking system and may be further compared. So, the project administrator is able to evaluate annotation consistency among annotators and across rounds of annotation, while annotators are able to reject or amend subsets of annotations made in previous rounds. As a side effect, the tracking system minimises resource and time consumption. Marky is a novel environment for managing multi-user and iterative document annotation projects. Compared to other tools, Marky offers a similar visually intuitive annotation experience while providing unique means to minimise annotation effort and enforce annotation quality, and therefore corpus consistency. Marky is freely available for non-commercial use at http://sing.ei.uvigo.es/marky. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

k2photometry: Read, reduce and detrend K2 photometry

NASA Astrophysics Data System (ADS)

Van Eylen, Vincent; Nowak, Grzegorz; Albrecht, Simon; Palle, Enric; Ribas, Ignasi; Bruntt, Hans; Perger, Manuel; Gandolfi, Davide; Hirano, Teriyuki; Sanchis-Ojeda, Roberto; Kiilerich, Amanda; Arranz, Jorge P.; Badenas, Mariona; Dai, Fei; Deeg, Hans J.; Guenther, Eike W.; Montanes-Rodriguez, Pilar; Narita, Norio; Rogers, Leslie A.; Bejar, Victor J. S.; Shrotriya, Tushar S.; Winn, Joshua N.; Sebastian, Daniel

2016-02-01

k2photometry reads, reduces and detrends K2 photometry and searches for transiting planets. MAST database pixel files are used as input; the output includes raw lightcurves, detrended lightcurves and a transit search can be performed as well. Stellar variability is not typically well-preserved but parameters can be tweaked to change that. The BLS algorithm used to detect periodic events is a Python implementation by Ruth Angus and Dan Foreman-Mackey (https://github.com/dfm/python-bls).

TechTuning: Stress Management For 3D Through-Silicon-Via Stacking Technologies

NASA Astrophysics Data System (ADS)

Radojcic, Riko; Nowak, Matt; Nakamoto, Mark

2011-09-01

The concerns with managing mechanical stress distributions and the consequent effects on device performance and material integrity, for advanced TSV based technologies 3D are outlined. A model and simulation based Design For Manufacturability (DFM) type of a flow for managing the mechanical stresses throughout Si die, stack and package design is proposed. The key attributes of the models and simulators required to fuel the proposed flow are summarized. Finally, some of the essential infrastructure and the Supply Chain support items are described.

Fuel Properties Effect on the Performance of a Small High Temperature Rise Combustor

DTIC Science & Technology

1989-01-01

Center Cleveland, Ohio and DTIC S h cELECTStephen A. Beckel DEC 3 11990Pat Whn iraf Pratt & Whitney Aircraft West Palm Beach, Florida Ea: D S Prepared...Beckel Government Products Division Pratt & Whitney Aircraft Nest Palm Beach, Florida Abstract Fuel physical properties that govern atomiz- ation and...fuels used were JP-5, a blend of Diesel Fuel actual combustion process, there is only a slight Marine/Home Hea.ing Oil (DFM/HHO), and a blend of

Field Studies of Exercise and Food Deprivation

DTIC Science & Technology

2006-08-01

Metabolic and structural changes in skeletal muscle during hypocaloric dieting . Am J Clin Nutr 1984; 39: 503–513.32 Opstad PK. Alterations in the morning...day 25.1 MJ/day DBW 1.1, 8.6 kg Strenuous activity can be sustained with adequate food and sleepRugged terrain: 28.3, 34.6 MJ/day High fat diet (60...fat) DFM 1.6, 7.0 kg Body composition of subjects converged with common tasks & diet DFFM 0.6, 1.4 kg %BFfinal 12.7, 13.5 (DEXA) Zimbabwean

A Study of the Nephrotoxicity and Metabolism of Tetralin and Indan in Fischer 344 Rats

DTIC Science & Technology

1989-05-01

5, a jet fuel composed of aliphatic and aromatic hydrocarbons with the majority of the straight-chain hydrocarbons being between C10 and C15...hydrocarbon of intermediate boiling point and volatility and is similar to the civilian jet fuel , A-1. DFM is a mixture of long chain aliphatic...to compliment earlier research on jet fuel , JP-10, cis- and trans- decalin, and tetralin, it was anticipated some enlightenment could be obtained on

A Study of the Nephrotoxicity and Metabolism of Tetralin and Indan in Fischer 344 Rats.

DTIC Science & Technology

1988-02-08

evaluated petroleum and shale-derived JP-5, a jet fuel composed of aliphatic and aromatic hydrocarbons with the majority of the straight-chain hydrocarbons...much like gasoline. JP-8 is a mixture of hydrocarbon of intermediate boiling point and volatility and is similar to the civilian jet fuel , A-1. DFM is a...conventional versus shale-derived JP-5 jet fuel : Light microscopy, hematologic, and serum chemistry studies. Toxicol Appl Pharmacol, 57, 302-317 (1981

Integrated Information Support System (IISS). Volume 8. User Interface Subsystem. Part 39. Electronic Documentation System (EDS) User’s Manual

DTIC Science & Technology

1990-09-30

conveying any rights or permission to manufacture, use, or market any patented invention that may in any way be related thereto. This technical report...Definition - Select .... 7-9 7-6 Character Class Definition - Other Options 7-10 7-7 Pattern/Action/State Defintion -Select 7-11 7-8 Pattern/Action/State...representation. Compound Document: A document which may contain mixed content i.e. text, graphics, etc. Conforming SGML Application: An SGML application that

Registration System's User Guide for the Renewable Fuel Standard Program

EPA Pesticide Factsheets

This EPA document is the User Guide for the OTAQ Fuels Program Registration (OTAQReg) online application describing the processes a user must follow to register; update their user profile; associate to companies as well as create, view and edit companies.

User-Centered Indexing for Adaptive Information Access

NASA Technical Reports Server (NTRS)

Chen, James R.; Mathe, Nathalie

1996-01-01

We are focusing on information access tasks characterized by large volume of hypermedia connected technical documents, a need for rapid and effective access to familiar information, and long-term interaction with evolving information. The problem for technical users is to build and maintain a personalized task-oriented model of the information to quickly access relevant information. We propose a solution which provides user-centered adaptive information retrieval and navigation. This solution supports users in customizing information access over time. It is complementary to information discovery methods which provide access to new information, since it lets users customize future access to previously found information. It relies on a technique, called Adaptive Relevance Network, which creates and maintains a complex indexing structure to represent personal user's information access maps organized by concepts. This technique is integrated within the Adaptive HyperMan system, which helps NASA Space Shuttle flight controllers organize and access large amount of information. It allows users to select and mark any part of a document as interesting, and to index that part with user-defined concepts. Users can then do subsequent retrieval of marked portions of documents. This functionality allows users to define and access personal collections of information, which are dynamically computed. The system also supports collaborative review by letting users share group access maps. The adaptive relevance network provides long-term adaptation based both on usage and on explicit user input. The indexing structure is dynamic and evolves over time. Leading and generalization support flexible retrieval of information under similar concepts. The network is geared towards more recent information access, and automatically manages its size in order to maintain rapid access when scaling up to large hypermedia space. We present results of simulated learning experiments.

Documentation of pharmaceutical care: Validation of an intervention oriented classification system.

PubMed

Maes, Karen A; Studer, Helene; Berger, Jérôme; Hersberger, Kurt E; Lampert, Markus L

2017-12-01

During the dispensing process, pharmacists may come across technical and clinical issues requiring a pharmaceutical intervention (PI). An intervention-oriented classification system is a helpful tool to document these PIs in a structured manner. Therefore, we developed the PharmDISC classification system (Pharmacists' Documentation of Interventions in Seamless Care). The aim of this study was to evaluate the PharmDISC system in the daily practice environment (in terms of interrater reliability, appropriateness, interpretability, acceptability, feasibility, and validity); to assess its user satisfaction, the descriptive manual, and the online training; and to explore first implementation aspects. Twenty-one pharmacists from different community pharmacies each classified 30 prescriptions requiring a PI with the PharmDISC system on 5 selected days within 5 weeks. Interrater reliability was determined using model PIs and Fleiss's kappa coefficients (κ) were calculated. User satisfaction was assessed by questionnaire with a 4-point Likert scale. The main outcome measures were interrater reliability (κ); appropriateness, interpretability, validity (ratio of completely classified PIs/all PIs); feasibility, and acceptability (user satisfaction and suggestions). The PharmDISC system reached an average substantial agreement (κ = 0.66). Of documented 519 PIs, 430 (82.9%) were completely classified. Most users found the system comprehensive (median user agreement 3 [2/3.25 quartiles]) and practical (3[2.75/3]). The PharmDISC system raised the awareness regarding drug-related problems for most users (n = 16). To facilitate its implementation, an electronic version that automatically connects to the prescription together with a task manager for PIs needing follow-up was suggested. Barriers could be time expenditure and lack of understanding the benefits. Substantial interrater reliability and acceptable user satisfaction indicate that the PharmDISC system is a valid system to document PIs in daily community pharmacy practice. © 2017 John Wiley & Sons, Ltd.

Online NASTRAN documentation

NASA Technical Reports Server (NTRS)

Turner, Horace Q.; Harper, David F.

1991-01-01

The distribution of NASTRAN User Manual information has been difficult because of the delay in printing and difficulty in identification of all the users. This has caused many users not to have the current information for the release of NASTRAN that could be available to them. The User Manual updates have been supplied with the NASTRAN Releases, but distribution within organizations was not coordinated with access to releases. The Executive Control, Case Control, and Bulk Data sections are supplied in machine readable format with the 91 Release of NASTRAN. This information is supplied on the release tapes in ASCII format, and a FORTRAN program to access this information is supplied on the release tapes. This will allow each user to have immediate access to User Manual level documentation with the release. The sections on utilities, plotting, and substructures are expected to be prepared for the 92 Release.

Long Duration Exposure Facility mini-data base user`s guide: IBM-compatible PC computer version. (Diskette)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bohnhoff-Hlavacek, G.; Pippin, G.; Dursch, H.

1995-04-01

One of the objectives of the LDEF Special Investigation Group (SIG) was to develop a LDEF data base that identifies the experiment objectives and hardware flown, summarizes results and conclusions, and provides a system analysis overview which would include spacecraft design guidelines and space environmental effects. Compiling this information into an easily accessible data base format and making it available to the space community was a major task accomplished by the System and Materials SIG effort beginning in 1991. Included in this document is a short user`s manual for the LDEF Mini-Data Bases. The user`s manual contains pertinent examples frommore » the data base on specifically how to access and work with the LDEF information. Accompanying this document are the mini-data bases on disk.« less

Position of document holder and work related risk factors for neck pain among computer users: a narrative review.

PubMed

Ambusam, S; Baharudin, O; Roslizawati, N; Leonard, J

2015-01-01

Document holder is used as a remedy to address occupational neck pain among computer users. An understanding on the effects of the document holder along with other work related risk factors while working in computer workstation requires attention. A comprehensive knowledge on the optimal location of the document holder in computer use and associated work related factors that may contribute to neck pain reviewed in this article. A literature search has been conducted over the past 14 years based on the published articles from January 1990 to January 2014 in both Science Direct and PubMed databases. Medical Subject Headings (MeSH) keywords for search were neck muscle OR head posture OR muscle tension' OR muscle activity OR work related disorders OR neck pain AND/OR document location OR document holder OR source document OR copy screen holder.Document holder placed lateral to the screen was most preferred to reduce neck discomfort among occupational typists. Document without a holder was placed flat on the surface is least preferred. The head posture and muscle activity increases when the document is placed flat on the surface compared to when placed on the document holder. Work related factors such as static posture, repetitive movement, prolong sitting and awkward positions were the risk factors for chronic neck pain. This review highlights the optimal location for document holder for computer users to reduce neck pain. Together, the importance of work related risk factors for to neck pain on occupational typist is emphasized for the clinical management.

Factors affecting and affected by user acceptance of computer-based nursing documentation: results of a two-year study.

PubMed

Ammenwerth, Elske; Mansmann, Ulrich; Iller, Carola; Eichstädter, Ronald

2003-01-01

The documentation of the nursing process is an important but often neglected part of clinical documentation. Paper-based systems have been introduced to support nursing process documentation. Frequently, however, problems such as low quality of documentation are reported. It is unclear whether computer-based documentation systems can reduce these problems and which factors influence their acceptance by users. We introduced a computer-based nursing documentation system on four wards of the University Hospitals of Heidelberg and systematically evaluated its preconditions and its effects in a pretest-posttest intervention study. For the analysis of user acceptance, we concentrated on subjective data drawn from questionnaires and interviews. A questionnaire was developed using items from published questionnaires and items that had to be developed for the special purpose of this study. The quantitative results point to two factors influencing the acceptance of a new computer-based documentation system: the previous acceptance of the nursing process and the previous amount of self-confidence when using computers. On one ward, the diverse acceptance scores heavily declined after the introduction of the nursing documentation system. Explorative qualitative analysis on this ward points to further success factors of computer-based nursing documentation systems. Our results can be used to assist the planning and introduction of computer-based nursing documentation systems. They demonstrate the importance of computer experience and acceptance of the nursing process on a ward but also point to other factors such as the fit between nursing workflow and the functionality of a nursing documentation system.

Repetition and Diversification in Multi-Session Task Oriented Search

ERIC Educational Resources Information Center

Tyler, Sarah K.

2013-01-01

As the number of documents and the availability of information online grows, so to can the difficulty in sifting through documents to find what we're searching for. Traditional Information Retrieval (IR) systems consider the query as the representation of the user's needs, and as such are limited to the user's ability to describe the information…

User Evaluation of Automatically Generated Semantic Hypertext Links in a Heavily Used Procedural Manual.

ERIC Educational Resources Information Center

Tebbutt, John

1999-01-01

Discusses efforts at National Institute of Standards and Technology (NIST) to construct an information discovery tool through the fusion of hypertext and information retrieval that works by parsing a contiguous document base into smaller documents and inserting semantic links between them. Also presents a case study that evaluated user reactions.…

The FORTRAN static source code analyzer program (SAP) user's guide, revision 1

NASA Technical Reports Server (NTRS)

Decker, W.; Taylor, W.; Eslinger, S.

1982-01-01

The FORTRAN Static Source Code Analyzer Program (SAP) User's Guide (Revision 1) is presented. SAP is a software tool designed to assist Software Engineering Laboratory (SEL) personnel in conducting studies of FORTRAN programs. SAP scans FORTRAN source code and produces reports that present statistics and measures of statements and structures that make up a module. This document is a revision of the previous SAP user's guide, Computer Sciences Corporation document CSC/TM-78/6045. SAP Revision 1 is the result of program modifications to provide several new reports, additional complexity analysis, and recognition of all statements described in the FORTRAN 77 standard. This document provides instructions for operating SAP and contains information useful in interpreting SAP output.

An Intelligent System for Document Retrieval in Distributed Office Environments.

ERIC Educational Resources Information Center

Mukhopadhyay, Uttam; And Others

1986-01-01

MINDS (Multiple Intelligent Node Document Servers) is a distributed system of knowledge-based query engines for efficiently retrieving multimedia documents in an office environment of distributed workstations. By learning document distribution patterns and user interests and preferences during system usage, it customizes document retrievals for…

A User-Centered Approach to Adaptive Hypertext Based on an Information Relevance Model

NASA Technical Reports Server (NTRS)

Mathe, Nathalie; Chen, James

1994-01-01

Rapid and effective to information in large electronic documentation systems can be facilitated if information relevant in an individual user's content can be automatically supplied to this user. However most of this knowledge on contextual relevance is not found within the contents of documents, it is rather established incrementally by users during information access. We propose a new model for interactively learning contextual relevance during information retrieval, and incrementally adapting retrieved information to individual user profiles. The model, called a relevance network, records the relevance of references based on user feedback for specific queries and user profiles. It also generalizes such knowledge to later derive relevant references for similar queries and profiles. The relevance network lets users filter information by context of relevance. Compared to other approaches, it does not require any prior knowledge nor training. More importantly, our approach to adaptivity is user-centered. It facilitates acceptance and understanding by users by giving them shared control over the adaptation without disturbing their primary task. Users easily control when to adapt and when to use the adapted system. Lastly, the model is independent of the particular application used to access information, and supports sharing of adaptations among users.

Computer-Assisted Search Of Large Textual Data Bases

NASA Technical Reports Server (NTRS)

Driscoll, James R.

1995-01-01

"QA" denotes high-speed computer system for searching diverse collections of documents including (but not limited to) technical reference manuals, legal documents, medical documents, news releases, and patents. Incorporates previously available and emerging information-retrieval technology to help user intelligently and rapidly locate information found in large textual data bases. Technology includes provision for inquiries in natural language; statistical ranking of retrieved information; artificial-intelligence implementation of semantics, in which "surface level" knowledge found in text used to improve ranking of retrieved information; and relevance feedback, in which user's judgements of relevance of some retrieved documents used automatically to modify search for further information.

78 FR 53702 - User Fees for Processing Installment Agreements and Offers in Compromise

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-30

... User Fees for Processing Installment Agreements and Offers in Compromise AGENCY: Internal Revenue... document contains proposed amendments to the regulations that provide user fees for installment agreements... agencies to prescribe regulations that establish charges for services provided by the agencies (user fees...

Automated software system for checking the structure and format of ACM SIG documents

NASA Astrophysics Data System (ADS)

Mirza, Arsalan Rahman; Sah, Melike

2017-04-01

Microsoft (MS) Office Word is one of the most commonly used software tools for creating documents. MS Word 2007 and above uses XML to represent the structure of MS Word documents. Metadata about the documents are automatically created using Office Open XML (OOXML) syntax. We develop a new framework, which is called ADFCS (Automated Document Format Checking System) that takes the advantage of the OOXML metadata, in order to extract semantic information from MS Office Word documents. In particular, we develop a new ontology for Association for Computing Machinery (ACM) Special Interested Group (SIG) documents for representing the structure and format of these documents by using OWL (Web Ontology Language). Then, the metadata is extracted automatically in RDF (Resource Description Framework) according to this ontology using the developed software. Finally, we generate extensive rules in order to infer whether the documents are formatted according to ACM SIG standards. This paper, introduces ACM SIG ontology, metadata extraction process, inference engine, ADFCS online user interface, system evaluation and user study evaluations.

Rooftop Unit Comparison Calculator User Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, James D.

This document serves as a user manual for the Packaged rooftop air conditioners and heat pump units comparison calculator (RTUCC) and is an aggregation of the calculator’s website documentation. Content ranges from new-user guide material like the “Quick Start” to the more technical/algorithmic descriptions of the “Methods Pages.” There is also a section listing all the context-help topics that support the features on the “Controls” page. The appendix has a discussion of the EnergyPlus runs that supported the development of the building-response models.

Smart gun technology requirements preliminary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weiss, D.R.; Brandt, D.J.; Tweet, K.D.

Goal of the Smart Gun Technology project is to eliminate the capability of an unauthorized user from firing a law enforcement officer`s firearm by implementing user-recognizing-and-authorizing surety technologies. This project is funded by the National Institute of Justice. This document reports the projects first objective: to find and document the requirements for a user-recognizing-and-authorizing firearm technology that law enforcement officers will value. This report details the problem of firearm takeaways in law enforcement, the methodology used to develop the law enforcement officers` requirements, and the requirements themselves.

First Steps in Government Documents: A Basic Guide.

ERIC Educational Resources Information Center

Sears, Jean L.; Moody, Marilyn K.

Designed to aid users in locating materials in the government documents department at Miami University in Oxford Ohio, this guide contains general information on the documents collection, a floor plan of the documents department, an introduction to U.S. government document finding aids, an introduction to U.S. Congressional and legislative…

Breaking the silos: The art documentation suite

DOE PAGES

Kutschke, Robert K.

2015-12-23

The art event-processing framework is used by almost all new experiments at Fermilab, and by several outside of Fermilab. All use art as an external product in the same sense that the compiler, ROOT, Geant4, CLHEP and boost are external products. The art team has embarked on a campaign to document art and develop training materials for new users. Many new users of art have little or no knowledge of C++, software engineering, build systems or the many external packages used by art or their experiments, such as ROOT, CLHEP, HEPPDT, and boost. To effectively teach art requires that themore » training materials include appropriate introductions to these topics as they are encountered. Experience has shown that simply referring readers to the existing native documentation does not work, too often a simple idea that they need to understand is described in a context that presumes prerequisites that are unimportant for a beginning user of art. There is the additional complication that the training materials must be presented in a way that does not presume knowledge of any of the experiments using art. Finally, new users of art arrive at random times throughout the year and the training materials must allow them to start to learn art at any time. This presentation will explain the strategies adopted by the art team to develop a documentation suite that complies with these boundary conditions. It will also show the present status of the documentation suite, including feedback the art team has received from pilot users.« less

Knowledge Workshop Development

DTIC Science & Technology

1976-01-30

priorities. The mechanism also seems to act as a buffer between developer and user, softening the negative aspects of user frustration while still...structure ’ programming methods. 4) Documentation: Effective documentation methods must be developed and used since undocumented programs are virtually...1-W.,U1..W1 . II I u KNOWLEDGE WORKSHOP DEVELOPMENT Douglas C. Engelbart Stanford Research Institute AD-A022 997 Prepared for: Rome

Professional Writing in the English Classroom: Let's Get Real--Using Usability to Connect Writers, Readers, and Texts

ERIC Educational Resources Information Center

Bush, Jonathan, Ed.; Zuidema, Leah, Ed.

2012-01-01

In professional writing, usability testing investigates how well users can find, understand, and use a document (Lannon). Usability testing involves gathering feedback from users, analyzing how successfully they used the document, and drawing on the test results to change or refine the design. From the authors' experiences as writers and teachers,…

Annotating Atomic Components of Papers in Digital Libraries: The Semantic and Social Web Heading towards a Living Document Supporting eSciences

NASA Astrophysics Data System (ADS)

García Castro, Alexander; García-Castro, Leyla Jael; Labarga, Alberto; Giraldo, Olga; Montaña, César; O'Neil, Kieran; Bateman, John A.

Rather than a document that is being constantly re-written as in the wiki approach, the Living Document (LD) is one that acts as a document router, operating by means of structured and organized social tagging and existing ontologies. It offers an environment where users can manage papers and related information, share their knowledge with their peers and discover hidden associations among the shared knowledge. The LD builds upon both the Semantic Web, which values the integration of well-structured data, and the Social Web, which aims to facilitate interaction amongst people by means of user-generated content. In this vein, the LD is similar to a social networking system, with users as central nodes in the network, with the difference that interaction is focused on papers rather than people. Papers, with their ability to represent research interests, expertise, affiliations, and links to web based tools and databanks, represent a central axis for interaction amongst users. To begin to show the potential of this vision, we have implemented a novel web prototype that enables researchers to accomplish three activities central to the Semantic Web vision: organizing, sharing and discovering. Availability: http://www.scientifik.info/

Quantifying the Causes and Propogation of the 2015 Washington Wildfires

NASA Astrophysics Data System (ADS)

Engel, R.; Marlier, M. E.; Lettenmaier, D. P.

2017-12-01

In the summer of 2015, Washington state experienced wildfires that burned over 450,000 ha, more than five times the average and more than three times the next-most severe fire season in the 30-year record. We examine the confluence of factors that led to the extreme fire season, and evaluate whether 2015 can be used as a predictor of possible future conditions that will be affected by climate warming. In previous work, we have found that 2015 was an extremely warm summer (nearly 1 degree C warmer than the previous year in the 30-year record) but was not particularly anomalous in terms of many other climatic indicators, including reconstructed soil moisture, the Palmer Drought Severity Index (PDSI), and the Canadian Fire Weather Index. However, according to the Dead Fuel Moisture (DFM), a drying index used by the US Forest Service, 2015 was an extreme year of record. The DFM relies on temperature, precipitation, and relative humidity to establish a daily equilibrium moisture content of dead material. We examine both Washington's 2015 fire season and the 30-year fire record with respect to climatology and other potential drivers of fire (e.g. forest health, ignition). Additionally, we explore the role of land cover with respect to fire propagation through the season. While too many potential causes of extreme fires exist to establish a concrete long-term relationship at such a fine scale, we find that the 2015 fire anomaly was at least partially climatically driven.

For Your Information (FYI) User Guide – Primary Support

EPA Pesticide Factsheets

This document is the user guide for the Primary Support user of the FYI tool which is part of the Office of Pollution Prevention and Toxics (OPPT) ‘For Your Information (FYI)’ application submission process.

User's manual for the National Water Information Systemof the U.S. Geological Survey Water-Quality System

USGS Publications Warehouse

Gellenbeck, Dorinda J.; Oblinger, Carolyn J.; Runkle, Donna L.; Schertz, Terry L.; Scott, Jonathon C.; Stoker, Yvonne E.; Taylor, Robert L.

2006-01-01

This user documentation is designed to be a reference for the Water-Quality System (QWDATA) within the National Water Information System (NWIS). For the new user, the 'Introduction' and 'Getting Started' sections are the recommended places to begin. The experienced user may want to go straight to the details provided in the program section (section 3). Code lists and some miscellaneous reference materials are provided in the Appendices. The last section, 'Tip Sheets,' is a collection of suggestions for accomplishing selected tasks, some of which are basic and some of which are advanced. Where appropriate, these Tip Sheets are referenced in the main text of the documentation.

User's manual for the National Water Information System of the U.S. Geological Survey (USGS), Water-quality System (QWDATA)

USGS Publications Warehouse

Gellenbeck, Dorinda; Oblinger, Carolyn J.; Runkle, Donna L.; Schertz, Terry L.; Scott, Jonathon C.; Taylor, Robert L.

2005-01-01

This user documentation is designed to be a reference for the Water-Quality System (QWDATA) within the National Water Information System (NWIS). For the new user, the 'Introduction' and 'Getting Started' sections are the recommended places to begin. The experienced user may want to go straight to the details provided in the program section (section 3). Code lists and some miscellaneous reference materials are provided in the Appendices. The last section, 'Tip Sheets,' is a collection of suggestions for accomplishing selected tasks, some of which are basic and some of which are advanced. Where appropriate, these Tip Sheets are referenced in the main text of the documentation.

Issues in Commercial Document Delivery.

ERIC Educational Resources Information Center

Marcinko, Randall Wayne

1997-01-01

Discusses (1) the history of document delivery; (2) the delivery process--end-user request, intermediary request, vendor reference, citation verification, obtaining document and source relations, quality control, transferring document to client, customer service and status, invoicing and billing, research and development, and copyright; and (3)…

Facilitating access to information in large documents with an intelligent hypertext system

NASA Technical Reports Server (NTRS)

Mathe, Nathalie

1993-01-01

Retrieving specific information from large amounts of documentation is not an easy task. It could be facilitated if information relevant in the current problem solving context could be automatically supplied to the user. As a first step towards this goal, we have developed an intelligent hypertext system called CID (Computer Integrated Documentation) and tested it on the Space Station Freedom requirement documents. The CID system enables integration of various technical documents in a hypertext framework and includes an intelligent context-sensitive indexing and retrieval mechanism. This mechanism utilizes on-line user information requirements and relevance feedback either to reinforce current indexing in case of success or to generate new knowledge in case of failure. This allows the CID system to provide helpful responses, based on previous usage of the documentation, and to improve its performance over time.

Repository-based software engineering program: Concept document

NASA Technical Reports Server (NTRS)

1992-01-01

This document provides the context for Repository-Based Software Engineering's (RBSE's) evolving functional and operational product requirements, and it is the parent document for development of detailed technical and management plans. When furnished, requirements documents will serve as the governing RBSE product specification. The RBSE Program Management Plan will define resources, schedules, and technical and organizational approaches to fulfilling the goals and objectives of this concept. The purpose of this document is to provide a concise overview of RBSE, describe the rationale for the RBSE Program, and define a clear, common vision for RBSE team members and customers. The document also provides the foundation for developing RBSE user and system requirements and a corresponding Program Management Plan. The concept is used to express the program mission to RBSE users and managers and to provide an exhibit for community review.

78 FR 18353 - Guidance for Industry: Blood Establishment Computer System Validation in the User's Facility...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

...; (Formerly FDA-2007D-0393)] Guidance for Industry: Blood Establishment Computer System Validation in the User... Industry: Blood Establishment Computer System Validation in the User's Facility'' dated April 2013. The... document entitled ``Guidance for Industry: Blood Establishment Computer System Validation in the User's...

78 FR 19714 - User Fees and Refunds for Premarket Approval Applications and Device Biologics License...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-02

...] User Fees and Refunds for Premarket Approval Applications and Device Biologics License Applications... availability of the guidance entitled ``User Fees and Refunds for Premarket Approval Applications (PMAs) and... for single copies of the guidance document entitled ``User Fees and Refunds for Premarket Approval...

TOPEX Software Document Series. Volume 5; Rev. 1; TOPEX GDR Processing

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis; Hancock, David W., III

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Geophysical Data Record (GDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Interference of age and supplementation of direct-fed microbial and essential oil in the activity of digestive enzymes and expression of genes related to transport and digestion of carbohydrates and proteins in the small intestine of broilers.

PubMed

Fernandez-Alarcon, M F; Trottier, N; Steibel, J P; Lunedo, R; Campos, D M B; Santana, A M; Pizauro, J M; Furlan, R L; Furlan, L R

2017-08-01

The objectives of this study were to describe alterations that age and dietary inclusion of direct-fed microbial (DFM) Bacillus subtilis (BS) and a specific essential oil (EO) blend (carvacrol, cinnamaldehyde, cineol, and pepper extract) causes in the activity of digestive enzymes (maltase: MALT; aminopeptidase-N: APN; intestinal alkaline phosphate: IAP) and expression patterns of genes related to transport (oligopeptide transporter gene: SLC15A1; Na+-dependent glucose and galactose transporter gene: SLC5A1; Na+-independent glucose, galactose, and fructose transporter gene: SLC2A2; ATPase, Na+/K+ transporting gene: ATP1A1) and digestion (aminopeptidase-N gene: ANPEP; maltase-glucoamylase gene: MGAM; Sucrase-isomaltase gene: SI) of carbohydrates and proteins in the small intestine of broilers. Also, the objective was to analyze if growth performance of broilers is affected by supplementation (BS and EO blend). Day-old male broiler chicks (n = 1,320) were assigned to 5 treatments. Diets included a basal diet (BD) as a negative control (CON); experimental diets were BD + BS; BD + BS + EO; BD + EO; BD + antibiotic growth promoter (AGP) avilamycin was the positive control. Performance was evaluated between 1 to 42 d. Transcript abundance of transport-related genes and digestion-related genes were assayed by RT-qPCR and determined at d 7, 21, and 42. MALT-, APN-, and IAP-specific activities were determined at d 7, 21, and 42. Broilers fed BS had greater SLC15A1 mRNA abundance compared to CON, while EO and AGP were related to higher activities of IAP and APN. Analysis over time revealed higher abundance of MGAM, SLC2A2, SLC15A1, SLC5A1 and SI mRNA at d 42 when compared to d 7. Activity of IAP decreased after d 7 and activity of MALT increased with age. The current study suggests that age had effect over carbohydrate and protein transport and carbohydrate digestion. The supplementation of BS DFM hade evident effect over protein transport and that the use of EO in the diet enhanced the activities of carbohydrate and protein digestion, reflecting improvement in digestive and transport physiology of birds. Changes performed by BS DFM and EO did not favor performance. © 2017 Poultry Science Association Inc.

Documentation of and satisfaction with the service delivery process of electric powered scooters among adult users in different national contexts.

PubMed

Sund, Terje; Iwarsson, Susanne; Andersen, Mette C; Brandt, Åse

2013-03-01

The purpose of this study was to investigate how different service delivery systems for assistive devices were associated with the service delivery process (SDP) and user satisfaction in two national contexts when electric powered scooters were provided. The study had a follow-up design based on a consecutive inclusion of 50 Danish and 86 Norwegian adults as they were about to be provided a scooter. A study-specific structured questionnaire for documentation of the SDP was administered. The Satisfaction with Assistive Technology Services was used for documenting user satisfaction with the SDP. Besides descriptive statistics, regression analysis was used to identify contributors of variance and predictors of user satisfaction. The various steps of the SDP were carried out to a various degree. Significantly more total time was spent in the SDP in the Danish sample (p < 0.001). About 80% of the informants were satisfied/very satisfied with different aspects of the SDP. Time spent in the different steps was not associated with user satisfaction with the SDP. This study supports the assumption that structure of the service impacts on the SDP, but not that the process impacts on outcomes in terms of user satisfaction with the SDP. It may, however, be questioned whether this actually is an outcome.

For Your Information (FYI) User Guide–Primary Authorized Official

EPA Pesticide Factsheets

This document is the user guide for the Primary Authorized Official (AO) user of the FYI tool which is part of the Office of Pollution Prevention and Toxics (OPPT) ‘For Your Information (FYI)’ application submission process.

Section 8(e) Notice User Guide – Primary Support

EPA Pesticide Factsheets

This document is the user guide for the Primary Support user of the Section 8(e) Notice tool which is part of the Office of Pollution Prevention and Toxics (OPPT) ‘Section 8(e) Notice’ application submission process.

MorphoSaurus--design and evaluation of an interlingua-based, cross-language document retrieval engine for the medical domain.

PubMed

Markó, K; Schulz, S; Hahn, U

2005-01-01

We propose an interlingua-based indexing approach to account for the particular challenges that arise in the design and implementation of cross-language document retrieval systems for the medical domain. Documents, as well as queries, are mapped to a language-independent conceptual layer on which retrieval operations are performed. We contrast this approach with the direct translation of German queries to English ones which, subsequently, are matched against English documents. We evaluate both approaches, interlingua-based and direct translation, on a large medical document collection, the OHSUMED corpus. A substantial benefit for interlingua-based document retrieval using German queries on English texts is found, which amounts to 93% of the (monolingual) English baseline. Most state-of-the-art cross-language information retrieval systems translate user queries to the language(s) of the target documents. In contra-distinction to this approach, translating both documents and user queries into a language-independent, concept-like representation format is more beneficial to enhance cross-language retrieval performance.

TOPEX SDR Processing, October 1998. Volume 4

NASA Technical Reports Server (NTRS)

Lee, Jeffrey E.; Lockwood, Dennis W.

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Progressive Learning of Topic Modeling Parameters: A Visual Analytics Framework.

PubMed

El-Assady, Mennatallah; Sevastjanova, Rita; Sperrle, Fabian; Keim, Daniel; Collins, Christopher

2018-01-01

Topic modeling algorithms are widely used to analyze the thematic composition of text corpora but remain difficult to interpret and adjust. Addressing these limitations, we present a modular visual analytics framework, tackling the understandability and adaptability of topic models through a user-driven reinforcement learning process which does not require a deep understanding of the underlying topic modeling algorithms. Given a document corpus, our approach initializes two algorithm configurations based on a parameter space analysis that enhances document separability. We abstract the model complexity in an interactive visual workspace for exploring the automatic matching results of two models, investigating topic summaries, analyzing parameter distributions, and reviewing documents. The main contribution of our work is an iterative decision-making technique in which users provide a document-based relevance feedback that allows the framework to converge to a user-endorsed topic distribution. We also report feedback from a two-stage study which shows that our technique results in topic model quality improvements on two independent measures.

BioTextQuest: a web-based biomedical text mining suite for concept discovery.

PubMed

Papanikolaou, Nikolas; Pafilis, Evangelos; Nikolaou, Stavros; Ouzounis, Christos A; Iliopoulos, Ioannis; Promponas, Vasilis J

2011-12-01

BioTextQuest combines automated discovery of significant terms in article clusters with structured knowledge annotation, via Named Entity Recognition services, offering interactive user-friendly visualization. A tag-cloud-based illustration of terms labeling each document cluster are semantically annotated according to the biological entity, and a list of document titles enable users to simultaneously compare terms and documents of each cluster, facilitating concept association and hypothesis generation. BioTextQuest allows customization of analysis parameters, e.g. clustering/stemming algorithms, exclusion of documents/significant terms, to better match the biological question addressed. http://biotextquest.biol.ucy.ac.cy vprobon@ucy.ac.cy; iliopj@med.uoc.gr Supplementary data are available at Bioinformatics online.

Miami Valley ITS : early deployment plan : final user service plan

DOT National Transportation Integrated Search

1997-07-01

This User Service Plan is the first major product of the process to develop an Intelligent Transportation System (ITS) Early Deployment Plan (EDP) for the Miami Valley. This User Service Plan documents the travel environment, growth trends and transp...

WFF TOPEX Software Documentation Altimeter Instrument File (AIF) Processing, October 1998. Volume 3

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Implementation of a School-wide Clinical Intervention Documentation System

PubMed Central

Stevenson, T. Lynn; Fox, Brent I.; Andrus, Miranda; Carroll, Dana

2011-01-01

Objective. To evaluate the effectiveness and impact of a customized Web-based software program implemented in 2006 for school-wide documentation of clinical interventions by pharmacy practice faculty members, pharmacy residents, and student pharmacists. Methods. The implementation process, directed by a committee of faculty members and school administrators, included preparation and refinement of the software, user training, development of forms and reports, and integration of the documentation process within the curriculum. Results. Use of the documentation tool consistently increased from May 2007 to December 2010. Over 187,000 interventions were documented with over $6.2 million in associated cost avoidance. Conclusions. Successful implementation of a school-wide documentation tool required considerable time from the oversight committee and a comprehensive training program for all users, with ongoing monitoring of data collection practices. Data collected proved to be useful to show the impact of faculty members, residents, and student pharmacists at affiliated training sites. PMID:21829264

User's guide for FRMOD, a zero dimensional FRM burn code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Driemeryer, D.; Miley, G.H.

1979-10-15

The zero-dimensional FRM plasma burn code, FRMOD is written in the FORTRAN language and is currently available on the Control Data Corporation (CDC) 7600 computer at the Magnetic Fusion Energy Computer Center (MFECC), sponsored by the US Department of Energy, in Livermore, CA. This guide assumes that the user is familiar with the system architecture and some of the utility programs available on the MFE-7600 machine, since online documentation is available for system routines through the use of the DOCUMENT utility. Users may therefore refer to it for answers to system related questions.

The computer integrated documentation project: A merge of hypermedia and AI techniques

NASA Technical Reports Server (NTRS)

Mathe, Nathalie; Boy, Guy

1993-01-01

To generate intelligent indexing that allows context-sensitive information retrieval, a system must be able to acquire knowledge directly through interaction with users. In this paper, we present the architecture for CID (Computer Integrated Documentation). CID is a system that enables integration of various technical documents in a hypertext framework and includes an intelligent browsing system that incorporates indexing in context. CID's knowledge-based indexing mechanism allows case based knowledge acquisition by experimentation. It utilizes on-line user information requirements and suggestions either to reinforce current indexing in case of success or to generate new knowledge in case of failure. This allows CID's intelligent interface system to provide helpful responses, based on previous experience (user feedback). We describe CID's current capabilities and provide an overview of our plans for extending the system.

Documentation of the GLAS fourth order general circulation model. Volume 1: Model documentation

NASA Technical Reports Server (NTRS)

Kalnay, E.; Balgovind, R.; Chao, W.; Edelmann, J.; Pfaendtner, J.; Takacs, L.; Takano, K.

1983-01-01

The volume 1, of a 3 volume technical memoranda which contains a documentation of the GLAS Fourth Order General Circulation Model is presented. Volume 1 contains the documentation, description of the stratospheric/tropospheric extension, user's guide, climatological boundary data, and some climate simulation studies.

Section 8(e) Notice User Guide – Primary Authorized Official

EPA Pesticide Factsheets

This document is the user guide for the Primary Authorized Official (AO) user of the Section 8(e) Notice tool which is part of the Office of Pollution Prevention and Toxics (OPPT) ‘Section 8(e) Notice’ application submission process.

CRAY mini manual. Revision D

NASA Technical Reports Server (NTRS)

Tennille, Geoffrey M.; Howser, Lona M.

1993-01-01

This document briefly describes the use of the CRAY supercomputers that are an integral part of the Supercomputing Network Subsystem of the Central Scientific Computing Complex at LaRC. Features of the CRAY supercomputers are covered, including: FORTRAN, C, PASCAL, architectures of the CRAY-2 and CRAY Y-MP, the CRAY UNICOS environment, batch job submittal, debugging, performance analysis, parallel processing, utilities unique to CRAY, and documentation. The document is intended for all CRAY users as a ready reference to frequently asked questions and to more detailed information contained in the vendor manuals. It is appropriate for both the novice and the experienced user.

G-Bean: an ontology-graph based web tool for biomedical literature retrieval

PubMed Central

2014-01-01

Background Currently, most people use NCBI's PubMed to search the MEDLINE database, an important bibliographical information source for life science and biomedical information. However, PubMed has some drawbacks that make it difficult to find relevant publications pertaining to users' individual intentions, especially for non-expert users. To ameliorate the disadvantages of PubMed, we developed G-Bean, a graph based biomedical search engine, to search biomedical articles in MEDLINE database more efficiently. Methods G-Bean addresses PubMed's limitations with three innovations: (1) Parallel document index creation: a multithreaded index creation strategy is employed to generate the document index for G-Bean in parallel; (2) Ontology-graph based query expansion: an ontology graph is constructed by merging four major UMLS (Version 2013AA) vocabularies, MeSH, SNOMEDCT, CSP and AOD, to cover all concepts in National Library of Medicine (NLM) database; a Personalized PageRank algorithm is used to compute concept relevance in this ontology graph and the Term Frequency - Inverse Document Frequency (TF-IDF) weighting scheme is used to re-rank the concepts. The top 500 ranked concepts are selected for expanding the initial query to retrieve more accurate and relevant information; (3) Retrieval and re-ranking of documents based on user's search intention: after the user selects any article from the existing search results, G-Bean analyzes user's selections to determine his/her true search intention and then uses more relevant and more specific terms to retrieve additional related articles. The new articles are presented to the user in the order of their relevance to the already selected articles. Results Performance evaluation with 106 OHSUMED benchmark queries shows that G-Bean returns more relevant results than PubMed does when using these queries to search the MEDLINE database. PubMed could not even return any search result for some OHSUMED queries because it failed to form the appropriate Boolean query statement automatically from the natural language query strings. G-Bean is available at http://bioinformatics.clemson.edu/G-Bean/index.php. Conclusions G-Bean addresses PubMed's limitations with ontology-graph based query expansion, automatic document indexing, and user search intention discovery. It shows significant advantages in finding relevant articles from the MEDLINE database to meet the information need of the user. PMID:25474588

G-Bean: an ontology-graph based web tool for biomedical literature retrieval.

PubMed

Wang, James Z; Zhang, Yuanyuan; Dong, Liang; Li, Lin; Srimani, Pradip K; Yu, Philip S

2014-01-01

Currently, most people use NCBI's PubMed to search the MEDLINE database, an important bibliographical information source for life science and biomedical information. However, PubMed has some drawbacks that make it difficult to find relevant publications pertaining to users' individual intentions, especially for non-expert users. To ameliorate the disadvantages of PubMed, we developed G-Bean, a graph based biomedical search engine, to search biomedical articles in MEDLINE database more efficiently. G-Bean addresses PubMed's limitations with three innovations: (1) Parallel document index creation: a multithreaded index creation strategy is employed to generate the document index for G-Bean in parallel; (2) Ontology-graph based query expansion: an ontology graph is constructed by merging four major UMLS (Version 2013AA) vocabularies, MeSH, SNOMEDCT, CSP and AOD, to cover all concepts in National Library of Medicine (NLM) database; a Personalized PageRank algorithm is used to compute concept relevance in this ontology graph and the Term Frequency - Inverse Document Frequency (TF-IDF) weighting scheme is used to re-rank the concepts. The top 500 ranked concepts are selected for expanding the initial query to retrieve more accurate and relevant information; (3) Retrieval and re-ranking of documents based on user's search intention: after the user selects any article from the existing search results, G-Bean analyzes user's selections to determine his/her true search intention and then uses more relevant and more specific terms to retrieve additional related articles. The new articles are presented to the user in the order of their relevance to the already selected articles. Performance evaluation with 106 OHSUMED benchmark queries shows that G-Bean returns more relevant results than PubMed does when using these queries to search the MEDLINE database. PubMed could not even return any search result for some OHSUMED queries because it failed to form the appropriate Boolean query statement automatically from the natural language query strings. G-Bean is available at http://bioinformatics.clemson.edu/G-Bean/index.php. G-Bean addresses PubMed's limitations with ontology-graph based query expansion, automatic document indexing, and user search intention discovery. It shows significant advantages in finding relevant articles from the MEDLINE database to meet the information need of the user.

National Practitioner Data Bank; change in user fee and elimination of diskette queries--HRSA. Withdrawal.

PubMed

1998-02-13

National Practitioner Data Bank; Change in User Fee and Elimination of Diskette Queries notice, document 98-2637, pages 5811-5812, Volume 63, Number 23, in the issue of Wednesday, February 4, 1998, was published in error and is withdrawn from publication. The correct version of the notice was published on Thursday, January 29, 1998, Document No. 98-2116, Volume 63, Number 19, page 4460.

Magnetic tape user guide

NASA Technical Reports Server (NTRS)

Evans, A. B.; Lee, L. L.

1985-01-01

This User Guide provides a general introduction to the structure, use, and handling of magnetic tapes at Langley Research Center (LaRC). The topics covered are tape terminology, physical characteristics, error prevention and detection, and creating, using, and maintaining tapes. Supplementary documentation is referenced where it might be helpful. The documentation is included for the tape utility programs, BLOCK, UNBLOCK, and TAPEDMP, which are available at the Central Scientific Computing Complex at LaRC.

Documentation--INFO: A Small Computer Data Base Management System for School Applications. The Illinois Series on Educational Application of Computers, No. 24e.

ERIC Educational Resources Information Center

Cox, John

This paper documents the program used in the application of the INFO system for data storage and retrieval in schools, from the viewpoints of both the unsophisticated user and the experienced programmer interested in using the INFO system or modifying it for use within an existing school's computer system. The opening user's guide presents simple…

76 FR 31823 - Technical Amendment to List of User Fee Airports: Addition of Dallas Love Field Municipal Airport...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-02

...] Technical Amendment to List of User Fee Airports: Addition of Dallas Love Field Municipal Airport, Dallas... fee airport designation for Dallas Love Field Municipal Airport, in Dallas, Texas. User fee airports... Love Field Municipal Airport. This document updates the list of user fee airports by adding Dallas Love...

78 FR 53152 - Prescription Drug User Fee Rates for Fiscal Year 2014; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-28

...] Prescription Drug User Fee Rates for Fiscal Year 2014; Correction AGENCY: Food and Drug Administration, HHS... ``Prescription Drug User Fee Rates for Fiscal Year 2014'' that appeared in the Federal Register of August 2, 2013 (78 FR 46980). The document announced the Fiscal Year 2014 fee rates for the Prescription Drug User...

MADS Users' Guide

NASA Technical Reports Server (NTRS)

Moerder, Daniel D.

2014-01-01

MADS (Minimization Assistant for Dynamical Systems) is a trajectory optimization code in which a user-specified performance measure is directly minimized, subject to constraints placed on a low-order discretization of user-supplied plant ordinary differential equations. This document describes the mathematical formulation of the set of trajectory optimization problems for which MADS is suitable, and describes the user interface. Usage examples are provided.

Advancing User Supports with a Structured How-To Knowledge Base for Earth Science Data

NASA Technical Reports Server (NTRS)

Shen, Suhung; Acker, James G.; Lynnes, Christopher S.; Beaty, Tammy; Lighty, Luther; Kempler, Steven J.

2016-01-01

It is a challenge to access and process fast growing Earth science data from satellites and numerical models, which may be archived in very different data format and structures. NASA data centers, managed by the Earth Observing System Data and Information System (EOSDIS), have developed a rich and diverse set of data services and tools with features intended to simplify finding, downloading, and working with these data. Although most data services and tools have user guides, many users still experience difficulties with accessing or reading data due to varying levels of familiarity with data services, tools, and/or formats. A type of structured online document, data recipe, were created in beginning 2013 by Goddard Earth Science Data and Information Services Center (GES DISC). A data recipe is the How-To document created by using the fixed template, containing step-by-step instructions with screenshots and examples of accessing and working with real data. The recipes has been found to be very helpful, especially to first-time-users of particular data services, tools, or data products. Online traffic to the data recipe pages is significant to some recipes. In 2014, the NASA Earth Science Data System Working Group (ESDSWG) for data recipes was established, aimed to initiate an EOSDIS-wide campaign for leveraging the distributed knowledge within EOSDIS and its user communities regarding their respective services and tools. The ESDSWG data recipe group started with inventory and analysis of existing EOSDIS-wide online help documents, and provided recommendations and guidelines and for writing and grouping data recipes. This presentation will overview activities of creating How-To documents at GES DISC and ESDSWG. We encourage feedback and contribution from users for improving the data How-To knowledge base.

Advancing User Supports with Structured How-To Knowledge Base for Earth Science Data

NASA Astrophysics Data System (ADS)

Shen, S.; Acker, J. G.; Lynnes, C.; Lighty, L.; Beaty, T.; Kempler, S.

2016-12-01

It is a challenge to access and process fast growing Earth science data from satellites and numerical models, which may be archived in very different data format and structures. NASA data centers, managed by the Earth Observing System Data and Information System (EOSDIS), have developed a rich and diverse set of data services and tools with features intended to simplify finding, downloading, and working with these data. Although most data services and tools have user guides, many users still experience difficulties with accessing or reading data due to varying levels of familiarity with data services, tools, and/or formats. A type of structured online document, "data recipe", were created in beginning 2013 by Goddard Earth Science Data and Information Services Center (GES DISC). A data recipe is the "How-To" document created by using the fixed template, containing step-by-step instructions with screenshots and examples of accessing and working with real data. The recipes has been found to be very helpful, especially to first-time-users of particular data services, tools, or data products. Online traffic to the data recipe pages is significant to some recipes. In 2014, the NASA Earth Science Data System Working Group (ESDSWG) for data recipes was established, aimed to initiate an EOSDIS-wide campaign for leveraging the distributed knowledge within EOSDIS and its user communities regarding their respective services and tools. The ESDSWG data recipe group started with inventory and analysis of existing EOSDIS-wide online help documents, and provided recommendations and guidelines and for writing and grouping data recipes. This presentation will overview activities of creating How-To documents at GES DISC and ESDSWG. We encourage feedback and contribution from users for improving the data How-To knowledge base.

Coordinating Council. Sixth Meeting: Who Are Our Key Users?

NASA Technical Reports Server (NTRS)

1991-01-01

This NASA Scientific and Technical Information Program Coordinating Council meeting deals with the topic 'Who are our key users?' Presentations were made on the following subtopics: Key users: Who uses the system the most, Who orders the most documents, Users: What do we know about them?, NASA/DOD Aerospace Knowledge Diffusion research project on 'Potential key users', How we meet the user's needs, and STI Council user requirements update. Summaries of discussions after the presentations are included along with visuals for the presentations.

OpenEIS. Users Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Woohyun; Lutes, Robert G.; Katipamula, Srinivas

This document is a users guide for OpenEIS, a software code designed to provide standard methods for authoring, sharing, testing, using and improving algorithms for operational building energy efficiency.

Enhancing User Customization through Novel Software Architecture for Utility Scale Solar Siting Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brant Peery; Sam Alessi; Randy Lee

2014-06-01

There is a need for a spatial decision support application that allows users to create customized metrics for comparing proposed locations of a new solar installation. This document discusses how PVMapper was designed to overcome the customization problem through the development of loosely coupled spatial and decision components in a JavaScript plugin architecture. This allows the user to easily add functionality and data to the system. The paper also explains how PVMapper provides the user with a dynamic and customizable decision tool that enables them to visually modify the formulas that are used in the decision algorithms that convert datamore » to comparable metrics. The technologies that make up the presentation and calculation software stack are outlined. This document also explains the architecture that allows the tool to grow through custom plugins created by the software users. Some discussion is given on the difficulties encountered while designing the system.« less

[Implementation of joint-crisis plans--a study of health care users and professionals].

PubMed

Grätz, Juliane; Brieger, Peter

2012-11-01

To study effects of the implementation of joint-crisis plans (JCP) on health-care users and professionals. The first 3 years of the implementation of JCP were followed with structured interviews with health-care users and professionals. Legal and administrative complications were documented. 36 of 44 subjects with JCP were assessed. Most of them had learned of JCP through other users or self-help. 55 % had prior experience with compulsory treatment. Better communication and self-determination were main goals of JCP. A relevant change in hospital treatment through JCP was not observed. Only few professionals had made direct experience with JCP. They valued JCP mildly positive. No legal and administrative complications were documented. Only a small minority of users signed JCP. JCP were easily employed and improved communication and self-determination. © Georg Thieme Verlag KG Stuttgart · New York.

14 CFR 1215.103 - Services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... White Sands, Goddard Space Flight Center (GSFC), and Johnson Space Center (JSC). (5) A weekly user...-launch support planning and documentation. (9) Scheduling user services via TDRSS. (10) Access to...

14 CFR 1215.103 - Services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... White Sands, Goddard Space Flight Center (GSFC), and Johnson Space Center (JSC). (5) A weekly user...-launch support planning and documentation. (9) Scheduling user services via TDRSS. (10) Access to...

14 CFR 1215.103 - Services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... White Sands, Goddard Space Flight Center (GSFC), and Johnson Space Center (JSC). (5) A weekly user...-launch support planning and documentation. (9) Scheduling user services via TDRSS. (10) Access to...

Databases post-processing in Tensoral

NASA Technical Reports Server (NTRS)

Dresselhaus, Eliot

1994-01-01

The Center for Turbulent Research (CTR) post-processing effort aims to make turbulence simulations and data more readily and usefully available to the research and industrial communities. The Tensoral language, introduced in this document and currently existing in prototype form, is the foundation of this effort. Tensoral provides a convenient and powerful protocol to connect users who wish to analyze fluids databases with the authors who generate them. In this document we introduce Tensoral and its prototype implementation in the form of a user's guide. This guide focuses on use of Tensoral for post-processing turbulence databases. The corresponding document - the Tensoral 'author's guide' - which focuses on how authors can make databases available to users via the Tensoral system - is currently unwritten. Section 1 of this user's guide defines Tensoral's basic notions: we explain the class of problems at hand and how Tensoral abstracts them. Section 2 defines Tensoral syntax for mathematical expressions. Section 3 shows how these expressions make up Tensoral statements. Section 4 shows how Tensoral statements and expressions are embedded into other computer languages (such as C or Vectoral) to make Tensoral programs. We conclude with a complete example program.

ShakeMap manual: technical manual, user's guide, and software guide

USGS Publications Warehouse

Wald, David J.; Worden, Bruce C.; Quitoriano, Vincent; Pankow, Kris L.

2005-01-01

ShakeMap (http://earthquake.usgs.gov/shakemap) --rapidly, automatically generated shaking and intensity maps--combines instrumental measurements of shaking with information about local geology and earthquake location and magnitude to estimate shaking variations throughout a geographic area. The results are rapidly available via the Web through a variety of map formats, including Geographic Information System (GIS) coverages. These maps have become a valuable tool for emergency response, public information, loss estimation, earthquake planning, and post-earthquake engineering and scientific analyses. With the adoption of ShakeMap as a standard tool for a wide array of users and uses came an impressive demand for up-to-date technical documentation and more general guidelines for users and software developers. This manual is meant to address this need. ShakeMap, and associated Web and data products, are rapidly evolving as new advances in communications, earthquake science, and user needs drive improvements. As such, this documentation is organic in nature. We will make every effort to keep it current, but undoubtedly necessary changes in operational systems take precedence over producing and making documentation publishable.

Understanding Clinician Information Demands and Synthesis of Clinical Documents in Electronic Health Record Systems

ERIC Educational Resources Information Center

Farri, Oladimeji Feyisetan

2012-01-01

Large quantities of redundant clinical data are usually transferred from one clinical document to another, making the review of such documents cognitively burdensome and potentially error-prone. Inadequate designs of electronic health record (EHR) clinical document user interfaces probably contribute to the difficulties clinicians experience while…

Reading and Writing in the 21st Century.

ERIC Educational Resources Information Center

Soloway, Elliot; And Others

1993-01-01

Describes MediaText, a multimedia document processor developed at the University of Michigan that allows the incorporation of video, music, sound, animations, still images, and text into one document. Interactive documents are discussed, and the need for users to be able to write documents as well as read them is emphasized. (four references) (LRW)

Generating Hierarchical Document Indices from Common Denominators in Large Document Collections.

ERIC Educational Resources Information Center

O'Kane, Kevin C.

1996-01-01

Describes an algorithm for computer generation of hierarchical indexes for document collections. The resulting index, when presented with a graphical interface, provides users with a view of a document collection that permits general browsing and informal search activities via an access method that requires no keyboard entry or prior knowledge of…

Fee Based Document Delivery by a National Library: Publishing in the New Millennium.

ERIC Educational Resources Information Center

Smith, Malcolm D.

1996-01-01

An overview of the development of document supply relationships between libraries and publishers, based on the British Library's Document Supply Centre, reveals four areas leading to fee based (copyright) document delivery: libraries as markets for publishers; making users aware of what is published; making publications more accessible; and the…

ANOPP2 User's Manual: Version 1.2

NASA Technical Reports Server (NTRS)

Lopes, L. V.; Burley, C. L.

2016-01-01

This manual documents the Aircraft NOise Prediction Program 2 (ANOPP2). ANOPP2 is a toolkit that includes a framework, noise prediction methods, and peripheral software to aid a user in predicting and understanding aircraft noise. This manual includes an explanation of the overall design and structure of ANOPP2, including a brief introduction to aircraft noise prediction and the ANOPP2 background, philosophy, and architecture. The concept of nested acoustic data surfaces and its application to a mixed-fidelity noise prediction are presented. The structure and usage of ANOPP2, which includes the communication between the user, the ANOPP2 framework, and noise prediction methods, are presented for two scenarios: wind-tunnel and flight. These scenarios serve to provide the user with guidance and documentation references for performing a noise prediction using ANOPP2.

How to Create, Modify, and Interface Aspen In-House and User Databanks for System Configuration 1:

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camp, D W

2000-10-27

The goal of this document is to provide detailed instructions to create, modify, interface, and test Aspen User and In-House databanks with minimal frustration. The level of instructions are aimed at a novice Aspen Plus simulation user who is neither a programming nor computer-system expert. The instructions are tailored to Version 10.1 of Aspen Plus and the specific computing configuration summarized in the Title of this document and detailed in Section 2. Many details of setting up databanks depend on the computing environment specifics, such as the machines, operating systems, command languages, directory structures, inter-computer communications software, the version ofmore » the Aspen Engine and Graphical User Interface (GUI), and the directory structure of how these were installed.« less

VIEWCACHE: An incremental pointer-base access method for distributed databases. Part 1: The universal index system design document. Part 2: The universal index system low-level design document. Part 3: User's guide. Part 4: Reference manual. Part 5: UIMS test suite

NASA Technical Reports Server (NTRS)

Kelley, Steve; Roussopoulos, Nick; Sellis, Timos

1992-01-01

The goal of the Universal Index System (UIS), is to provide an easy-to-use and reliable interface to many different kinds of database systems. The impetus for this system was to simplify database index management for users, thus encouraging the use of indexes. As the idea grew into an actual system design, the concept of increasing database performance by facilitating the use of time-saving techniques at the user level became a theme for the project. This Final Report describes the Design, the Implementation of UIS, and its Language Interfaces. It also includes the User's Guide and the Reference Manual.

An electronic registry for physiotherapists in Belgium.

PubMed

Buyl, Ronald; Nyssen, Marc

2008-01-01

This paper describes the results of the KINELECTRICS project. Since more and more clinical documents are stored and transmitted in an electronic way, the aim of this project was to design an electronic version of the registry that contains all acts of physiotherapists. The solution we present here, not only meets all legal constraints, but also enables to verify the traceability and inalterability of the generated documents, by means of SHA-256 codes. The proposed structure, using XML technology can also form a basis for the development of tools that can be used by the controlling authorities. By means of a certification procedure for software systems, we succeeded in developing a user friendly system that enables end-users that use a quality labeled software package, to automatically produce all the legally necessary documents concerning the registry. Moreover, we hope that this development will be an incentive for non-users to start working in an electronic way.

A Generic Approach for Pen-Based User Interface Development

NASA Astrophysics Data System (ADS)

Macé, Sébastien; Anquetil, Éric

Pen-based interaction is an intuitive way to realize hand drawn structured documents, but few applications take advantage of it. Indeed, the interpretation of the user hand drawn strokes in the context of document is a complex problem. In this paper, we propose a new generic approach to develop such systems based on three independent components. The first one is a set of graphical and editing functions adapted to pen interaction. The second one is a rule-based formalism that models structured document composition and the corresponding interpretation process. The last one is a hand drawn stroke analyzer that is able to interpret strokes progressively, directly while the user is drawing. We highlight in particular the human-computer interaction induced from this progressive interpretation process. Thanks to this generic approach, three pen-based system prototypes have already been developed, for musical score editing, for graph editing, and for UML class diagram editing

Self-esteem and trait anxiety in relation to drug misuse in Kuwait.

PubMed

al-Najjar, M; Clarke, D D

1996-05-01

This study was designed to document knowledge about Kuwaiti drug users and to investigate whether or not there is an association between their poor self-concept and high level of anxiety. One hundred and seven incarcerated drug users, 107 individuals serving prison terms for offenses other than drug use, and 107 "normal" individuals were included in this pilot study. The Arabic version of Rosenberg's Self-Esteem Scale and Spielberger's State-Trait Anxiety Inventory were used to measure the subjects' self-esteem and state-trait anxiety, respectively. The results documented revealed that there is a relationship between levels of self-esteem and anxiety in Kuwaiti drug user behavior.

An Evaluation and Redesign of the Conflict Prediction and Trial Planning Planview Graphical User Interface

NASA Technical Reports Server (NTRS)

Laudeman, Irene V.; Brasil, Connie L.; Stassart, Philippe

1998-01-01

The Planview Graphical User Interface (PGUI) is the primary display of air traffic for the Conflict Prediction and Trial Planning, function of the Center TRACON Automation System. The PGUI displays air traffic information that assists the user in making decisions related to conflict detection, conflict resolution, and traffic flow management. The intent of this document is to outline the human factors issues related to the design of the conflict prediction and trial planning portions of the PGUI, document all human factors related design changes made to the PGUI from December 1996 to September 1997, and outline future plans for the ongoing PGUI design.

Plasmonic-based nanoprobes for dynamic sensing of single tumor cells (Conference Presentation)

NASA Astrophysics Data System (ADS)

Chen, Zixuan

2017-02-01

We described here two plasmonic-based nanoprobes with purpose of imaging dynamic biologic process of single tumor cells. At first, we proposed a multi-modified core-shell gold@silver nanorods for real-time monitoring the entire autophagy process at single-cell level. Autophagy is vital for understanding the mechanisms of human pathologies, developing novel drugs and exploring approaches for autophagy controlling. The plasmon resonance scattering spectra of the nanoprobes was superoxide radicals (O2•-)-dependent, a major indicator of cell autophagy, and suitable for real-time monitoring at single-cell level. More importantly, with the introduction of `relay probe' operation, two types of O2•-regulating autophagy processes were successfully traced from the beginning to the end, and the possible mechanism was also proposed. According to our results, intracellular O2•- level controlled the autophagy process by mediating the autolysosome generation. Different starvation approaches can induce different autophagy processes, such as diverse steady state time-consuming. In addition, a plasmonic-based nanothermometer was prepared via dense thermosensitive polymer (pNIPAAm) capping on gold nanorods, of which the plasmon resonance spectra was linearly dependent on adjacent temperature. In this work, the white light transmitted dark-field illuminator was replaced by a laser total internal reflection dark-field microscope (LTIR-DFM) system in order to overcome the low-throughput and inexorable biological scattering background of DFM, as well as interference from mechanic noise, nanoprobe direction, optical system drift, etc. With this nanothermometer, we have successfully captured temporal biological thermal process (thermogenesis) occurred in single tumor cells, providing a new potential strategy for in-situ cellular analysis.

GEOSAT Follow-On (GFO) Altimeter Document Series. Volume 5; Version 1; GFO Radar Altimeter Processing at Wallops Flight Facility

NASA Technical Reports Server (NTRS)

Lockwood, Dennis W.; Conger, A. M.

2003-01-01

This document is a compendium of the WFF GFO Software Development Team's knowledge regarding of GDO CAL/VAL Data. It includes many elements of a requirements document, a software specification document, a software design document, and a user's guide. In the more technical sections, this document assumes the reader is familiar with GFO and its CAL/VAL Data.

Using Induction to Refine Information Retrieval Strategies

NASA Technical Reports Server (NTRS)

Baudin, Catherine; Pell, Barney; Kedar, Smadar

1994-01-01

Conceptual information retrieval systems use structured document indices, domain knowledge and a set of heuristic retrieval strategies to match user queries with a set of indices describing the document's content. Such retrieval strategies increase the set of relevant documents retrieved (increase recall), but at the expense of returning additional irrelevant documents (decrease precision). Usually in conceptual information retrieval systems this tradeoff is managed by hand and with difficulty. This paper discusses ways of managing this tradeoff by the application of standard induction algorithms to refine the retrieval strategies in an engineering design domain. We gathered examples of query/retrieval pairs during the system's operation using feedback from a user on the retrieved information. We then fed these examples to the induction algorithm and generated decision trees that refine the existing set of retrieval strategies. We found that (1) induction improved the precision on a set of queries generated by another user, without a significant loss in recall, and (2) in an interactive mode, the decision trees pointed out flaws in the retrieval and indexing knowledge and suggested ways to refine the retrieval strategies.

User's Guide for ERB 7 SEFDT. Volume 1: User's Guide. Volume 2: Quality Control Report, Year 1

NASA Technical Reports Server (NTRS)

Ray, S. N.; Tighe, R. J.; Scherrer, S. A.

1984-01-01

The Nimbus-7 ERB SEFDT Data User's Guide is presented. The guide consists of four subsections which describe: (1) the scope of the data User's Guide; (2) the background on Nimbus-7 Spacecraft and the ERB experiment; (3) the SEFDT data product and processing scenario; and (4) other related products and documents.

User Delay Cost Model and Facilities Maintenance Cost Model for a Terminal Control Area : Volume 2. User's Manual and Program Documentation for the User Delay Cost Model

DOT National Transportation Integrated Search

1978-05-01

The User Delay Cost Model (UDCM) is a Monte Carlo simulation of certain classes of movement of air traffic in the Boston Terminal Control Area (TCA). It incorporates a weather module, an aircraft generation module, a facilities module, and an air con...

Smart roadside initiative : user manual.

DOT National Transportation Integrated Search

2015-09-01

This document provides the user instructions for the Smart Roadside Initiative (SRI) applications including mobile and web-based SRI applications. These applications include smartphone-enabled information exchange and notification, and software compo...

The CloudBoard Research Platform: an interactive whiteboard for corporate users

NASA Astrophysics Data System (ADS)

Barrus, John; Schwartz, Edward L.

2013-03-01

Over one million interactive whiteboards (IWBs) are sold annually worldwide, predominantly for classroom use with few sales for corporate use. Unmet needs for IWB corporate use were investigated and the CloudBoard Research Platform (CBRP) was developed to investigate and test technology for meeting these needs. The CBRP supports audio conferencing with shared remote drawing activity, casual capture of whiteboard activity for long-term storage and retrieval, use of standard formats such as PDF for easy import of documents via the web and email and easy export of documents. Company RFID badges and key fobs provide secure access to documents at the board and automatic logout occurs after a period of inactivity. Users manage their documents with a web browser. Analytics and remote device management is provided for administrators. The IWB hardware consists of off-the-shelf components (a Hitachi UST Projector, SMART Technologies, Inc. IWB hardware, Mac Mini, Polycom speakerphone, etc.) and a custom occupancy sensor. The three back-end servers provide the web interface, document storage, stroke and audio streaming. Ease of use, security, and robustness sufficient for internal adoption was achieved. Five of the 10 boards installed at various Ricoh sites have been in daily or weekly use for the past year and total system downtime was less than an hour in 2012. Since CBRP was installed, 65 registered users, 9 of whom use the system regularly, have created over 2600 documents.

Integrated Baseline System (IBS), Version 1.03. User guide: Chemical Stockpile Emergency Preparedness Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, B.M.; Burford, M.J.; Downing, T.R.

The Integrated Baseline System (IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planing and analysis. This document is the user guide for the IBS and explains how to operate the IBS system. The fundamental function of the IBS is to provide tools that civilian emergency management personnel can use in developing emergency plans and in supporting emergency management activities to cope with a chemical-releasing event at a military chemical stockpile. Emergency management planners can evaluate concepts and ideas using the IBS system. The results of that experience can then be factoredmore » into refining requirements and plans. This document provides information for the general system user, and is the primary reference for the system features of the IBS. It is designed for persons who are familiar with general emergency management concepts, operations, and vocabulary. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other LBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary. IBS is a dynamic system. Its capabilities are in a state of continuing expansion and enhancement.« less

USER'S GUIDE FOR GLOED VERSION 1.0 - THE GLOBAL EMISSIONS DATABASE

EPA Science Inventory

The document is a user's guide for the EPA-developed, powerful software package, Global Emissions Database (GloED). GloED is a user-friendly, menu-driven tool for storing and retrieving emissions factors and activity data on a country-specific basis. Data can be selected from dat...

14 CFR 1215.110 - User cancellation of all services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false User cancellation of all services. 1215.110 Section 1215.110 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION TRACKING AND DATA...-launch activities, services, and mission documentation not included in that charge. The user will remain...

14 CFR 1215.110 - User cancellation of all services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false User cancellation of all services. 1215.110 Section 1215.110 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION TRACKING AND DATA...-launch activities, services, and mission documentation not included in that charge. The user will remain...

14 CFR 1215.110 - User cancellation of all services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false User cancellation of all services. 1215.110 Section 1215.110 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION TRACKING AND DATA...-launch activities, services, and mission documentation not included in that charge. The user will remain...

14 CFR 1215.110 - User cancellation of all services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true User cancellation of all services. 1215.110 Section 1215.110 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION TRACKING AND DATA...-launch activities, services, and mission documentation not included in that charge. The user will remain...

AF-Shell 1.0 User Guide

NASA Technical Reports Server (NTRS)

McElroy, Mark W.

2017-01-01

This document serves as a user guide for the AF-Shell 1.0 software, an efficient tool for progressive damage simulation in composite laminates. This guide contains minimal technical material and is meant solely as a guide for a new user to apply AF-Shell 1.0 to laminate damage simulation problems.

STS ancillary equipment study. [user reference book for multimission modular spacecraft missions

NASA Technical Reports Server (NTRS)

Plough, J. A.

1977-01-01

Spaceborne and ground ancillary equipment for multimission module spacecraft are listed to provide documentation for potential users interested in utilizing existing equipment rather than developing payload unique designs. The format of the data form contained in the Ancillary Equipment user reference book is discussed.

Designing Privacy Notices: Supporting User Understanding and Control

ERIC Educational Resources Information Center

Kelley, Patrick Gage

2013-01-01

Users are increasingly expected to manage complex privacy settings in their normal online interactions. From shopping to social networks, users make decisions about sharing their personal information with corporations and contacts, frequently with little assistance. Current solutions require consumers to read long documents or go out of their way…

On-demand hypermedia/multimedia service over broadband networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bouras, C.; Kapoulas, V.; Spirakis, P.

1996-12-31

In this paper we present a unified approach for delivering hypermedia/multimedia objects over broadband networks. Documents are stored in various multimedia servers, while the inline data may reside in their own media servers, attached to the multimedia servers. The described service consists of several multimedia servers and a set of functions that intend to present to the end user interactive information in real-time. Users interact with the service requesting multimedia documents on demand. Various media streams are transmitted over different parallel connections according lo their transmission requirements. The hypermedia documents are structured using a hypermedia markup language that keeps informationmore » of the spatiotemporal relationships among document`s media components. In order to deal with the variant network behavior, buffering manipulation mechanisms and grading of the transmitted media quality techniques are proposed to smooth presentation and synchronization anomalies.« less

Mental health first aid guidelines: an evaluation of impact following download from the World Wide Web.

PubMed

Hart, Laura M; Jorm, Anthony F; Paxton, Susan J; Cvetkovski, Stefan

2012-11-01

Mental health first aid guidelines provide the public with consensus-based information about how to assist someone who is developing a mental illness or experiencing a mental health crisis. The aim of the current study was to evaluate the usefulness and impact of the guidelines on web users who download them. Web users who downloaded the documents were invited to respond to an initial demographic questionnaire, then a follow up about how the documents had been used, their perceived usefulness, whether first-aid situations had been encountered and if these were influenced by the documents. Over 9.8 months, 706 web users responded to the initial questionnaire and 154 responded to the second. A majority reported downloading the document because their job involved contact with people with mental illness. Sixty-three web users reported providing first aid, 44 of whom reported that the person they were assisting had sought professional care as a result of their suggestion. Twenty-three web users reported seeking care themselves. A majority of those who provided first aid reported feeling that they had been successful in helping the person, that they had been able to assist in a way that was more knowledgeable, skilful and supportive, and that the guidelines had contributed to these outcomes. Information made freely available on the Internet, about how to provide mental health first aid to someone who is developing a mental health problem or experiencing a mental health crisis, is associated with more positive, empathic and successful helping behaviours. © 2012 Wiley Publishing Asia Pty Ltd.

Modeling Guru: Knowledge Base for NASA Modelers

NASA Astrophysics Data System (ADS)

Seablom, M. S.; Wojcik, G. S.; van Aartsen, B. H.

2009-05-01

Modeling Guru is an on-line knowledge-sharing resource for anyone involved with or interested in NASA's scientific models or High End Computing (HEC) systems. Developed and maintained by the NASA's Software Integration and Visualization Office (SIVO) and the NASA Center for Computational Sciences (NCCS), Modeling Guru's combined forums and knowledge base for research and collaboration is becoming a repository for the accumulated expertise of NASA's scientific modeling and HEC communities. All NASA modelers and associates are encouraged to participate and provide knowledge about the models and systems so that other users may benefit from their experience. Modeling Guru is divided into a hierarchy of communities, each with its own set forums and knowledge base documents. Current modeling communities include those for space science, land and atmospheric dynamics, atmospheric chemistry, and oceanography. In addition, there are communities focused on NCCS systems, HEC tools and libraries, and programming and scripting languages. Anyone may view most of the content on Modeling Guru (available at http://modelingguru.nasa.gov/), but you must log in to post messages and subscribe to community postings. The site offers a full range of "Web 2.0" features, including discussion forums, "wiki" document generation, document uploading, RSS feeds, search tools, blogs, email notification, and "breadcrumb" links. A discussion (a.k.a. forum "thread") is used to post comments, solicit feedback, or ask questions. If marked as a question, SIVO will monitor the thread, and normally respond within a day. Discussions can include embedded images, tables, and formatting through the use of the Rich Text Editor. Also, the user can add "Tags" to their thread to facilitate later searches. The "knowledge base" is comprised of documents that are used to capture and share expertise with others. The default "wiki" document lets users edit within the browser so others can easily collaborate on the same document, even allowing the author to select those who may edit and approve the document. To maintain knowledge integrity, all documents are moderated before they are visible to the public. Modeling Guru, running on Clearspace by Jive Software, has been an active resource to the NASA modeling and HEC communities for more than a year and currently has more than 100 active users. SIVO will soon install live instant messaging support, as well as a user-customizable homepage with social-networking features. In addition, SIVO plans to implement a large dataset/file storage capability so that users can quickly and easily exchange datasets and files with one another. Continued active community participation combined with periodic software updates and improved features will ensure that Modeling Guru remains a vibrant, effective, easy-to-use tool for the NASA scientific community.

Document Design: A Review of the Relevant Research.

ERIC Educational Resources Information Center

Felker, Daniel B., Ed.

Research from several disciplines has been examined to create this literature review of information on document design, the overall movement toward producing public documents that the intended users can understand. Six chapters review appropriate research from the areas of psycholinguistics, cognitive psychology, instructional research,…

48 CFR 352.227-14 - Rights in Data-Exceptional Circumstances.

Code of Federal Regulations, 2014 CFR

2014-10-01

....] Computer database or database means a collection of recorded information in a form capable of, and for the... databases or computer software documentation. Computer software documentation means owner's manuals, user's... nature (including computer databases and computer software documentation). This term does not include...

Relevance of health level 7 clinical document architecture and integrating the healthcare enterprise cross-enterprise document sharing profile for managing chronic wounds in a telemedicine context.

PubMed

Finet, Philippe; Gibaud, Bernard; Dameron, Olivier; Le Bouquin Jeannès, Régine

2016-03-01

The number of patients with complications associated with chronic diseases increases with the ageing population. In particular, complex chronic wounds raise the re-admission rate in hospitals. In this context, the implementation of a telemedicine application in Basse-Normandie, France, contributes to reduce hospital stays and transport. This application requires a new collaboration among general practitioners, private duty nurses and the hospital staff. However, the main constraint mentioned by the users of this system is the lack of interoperability between the information system of this application and various partners' information systems. To improve medical data exchanges, the authors propose a new implementation based on the introduction of interoperable clinical documents and a digital document repository for managing the sharing of the documents between the telemedicine application users. They then show that this technical solution is suitable for any telemedicine application and any document sharing system in a healthcare facility or network.

Automatic public access to documents and maps stored on and internal secure system.

NASA Astrophysics Data System (ADS)

Trench, James; Carter, Mary

2013-04-01

The Geological Survey of Ireland operates a Document Management System for providing documents and maps stored internally in high resolution and in a high level secure environment, to an external service where the documents are automatically presented in a lower resolution to members of the public. Security is devised through roles and Individual Users where role level and folder level can be set. The application is an electronic document/data management (EDM) system which has a Geographical Information System (GIS) component integrated to allow users to query an interactive map of Ireland for data that relates to a particular area of interest. The data stored in the database consists of Bedrock Field Sheets, Bedrock Notebooks, Bedrock Maps, Geophysical Surveys, Geotechnical Maps & Reports, Groundwater, GSI Publications, Marine, Mine Records, Mineral Localities, Open File, Quaternary and Unpublished Reports. The Konfig application Tool is both an internal and public facing application. It acts as a tool for high resolution data entry which are stored in a high resolution vault. The public facing application is a mirror of the internal application and differs only in that the application furnishes high resolution data into low resolution format which is stored in a low resolution vault thus, making the data web friendly to the end user for download.

Classification of document page images based on visual similarity of layout structures

NASA Astrophysics Data System (ADS)

Shin, Christian K.; Doermann, David S.

1999-12-01

Searching for documents by their type or genre is a natural way to enhance the effectiveness of document retrieval. The layout of a document contains a significant amount of information that can be used to classify a document's type in the absence of domain specific models. A document type or genre can be defined by the user based primarily on layout structure. Our classification approach is based on 'visual similarity' of the layout structure by building a supervised classifier, given examples of the class. We use image features, such as the percentages of tex and non-text (graphics, image, table, and ruling) content regions, column structures, variations in the point size of fonts, the density of content area, and various statistics on features of connected components which can be derived from class samples without class knowledge. In order to obtain class labels for training samples, we conducted a user relevance test where subjects ranked UW-I document images with respect to the 12 representative images. We implemented our classification scheme using the OC1, a decision tree classifier, and report our findings.

Hazardous Waste Generator Regulations: A User-Friendly Reference Document

EPA Pesticide Factsheets

User-friendly reference to assist EPA and state staff, industrial facilities generating and managing hazardous wastes as well as the general public, in locating and understanding RCRA hazardous waste generator regulations.

Teaching Documentation Writing: What Else Students--And Instructors--Should Know.

ERIC Educational Resources Information Center

Boiarsky, Carolyn; Dobberstein, Michael

1998-01-01

Discusses the knowledge, problem-solving strategies, and desktop publishing skills students need to learn about documentation writing. Describes a course developed by the authors that provides these skills, focusing on strategies for problem solving, user analysis, conventions, document design and desktop publishing, and using authentic…

27 CFR 20.45 - Organizational documents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... and Users Application for Permit, Form 5150.22 § 20.45 Organizational documents. The supporting... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Organizational documents. 20.45 Section 20.45 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU...

Astronomy for Everyone: Harvard's Move Toward an All-Inclusive Astronomy Lab and Telescope

NASA Astrophysics Data System (ADS)

Bieryla, Allyson

2016-01-01

Harvard University has a growing astronomy program that offers various courses to the undergraduate concentrators, secondaries and non-majors. Many of the courses involve labs that use the 16-inch DFM Clay Telescope for night-time observations and the heliostat for observing the Sun. The goal is to proactively adapt the lab and telescope facilities to accommodate all students with disabilities. The current focus is converting the labs to accommodate visually impaired students. Using tactile images and sound, the intention is to create an experience equivalent to that of a student with full sight.

Power enhanced frequency conversion system

NASA Technical Reports Server (NTRS)

Sanders, Steven (Inventor); Lang, Robert J. (Inventor); Waarts, Robert G. (Inventor)

2001-01-01

A frequency conversion system includes at least one source providing a first near-IR wavelength output including a gain medium for providing high power amplification, such as double clad fiber amplifier, a double clad fiber laser or a semiconductor tapered amplifier to enhance the power output level of the near-IR wavelength output. The NFM device may be a difference frequency mixing (DFM) device or an optical parametric oscillation (OPO) device. Pump powers are gain enhanced by the addition of a rare earth amplifier or oscillator, or a Ra-man/Brillouin amplifier or oscillator between the high power source and the NFM device.

NPARC v3.1 User's Guide: A Companion to the NPARC v3.0 User's Guide

NASA Technical Reports Server (NTRS)

Chung, Joongkee; Slater, John W.; Suresh, Ambady; Townsend, Scott

1999-01-01

NPARC v3.1 is a modification to the NPARC v3.0 computer program which expands the capabilities for time-accurate computations through the use of a Newton iterative implicit method, time-varying boundary conditions, and planar dynamic grids. This document discusses some of the changes from the NPARC v3.0, specifically: changes to the directory structure and execution, changes to the input format. background on new methods, new boundary conditions. dynamic grids, new options for output, usage concepts, and some test cases to serve as tutorials. This document is intended to be used in conjunction with the NPARC v3.0 user's guide.

USER'S GUIDE TO THE PERSONAL COMPUTER VERSION OF THE BIOGENIC EMISSIONS INVENTORY SYSTEM (PC-BEIS2)

EPA Science Inventory

The document is a user's guide for an updated Personal Computer version of the Biogenic Emissions Inventory System (PC-BEIS2), allowing users to estimate hourly emissions of biogenic volatile organic compounds (BVOCs) and soil nitrogen oxide emissions for any county in the contig...

14 CFR § 1215.110 - User cancellation of all services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false User cancellation of all services. § 1215.110 Section § 1215.110 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION TRACKING... of pre-launch activities, services, and mission documentation not included in that charge. The user...

Library Automation Alternatives in 1996 and User Satisfaction Ratings of Library Users by Operating System.

ERIC Educational Resources Information Center

Cibbarelli, Pamela

1996-01-01

Examines library automation product introductions and conversions to new operating systems. Compares user satisfaction ratings of the following library software packages: DOS/Windows, UNIX, Macintosh, and DEC VAX/VMS. Software is rated according to documentation, service/support, training, product reliability, product capabilities, ease of use,…

Sesame IO Library User Manual Version 8

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abhold, Hilary; Young, Ginger Ann

This document is a user manual for SES_IO, a low-level library for reading and writing sesame files. The purpose of the SES_IO library is to provide a simple user interface for accessing and creating sesame files that does not change across sesame format type (such as binary, ascii, and xml).

Section 4. The GIS Weasel User's Manual

USGS Publications Warehouse

Viger, Roland J.; Leavesley, George H.

2007-01-01

INTRODUCTION The GIS Weasel was designed to aid in the preparation of spatial information for input to lumped and distributed parameter hydrologic or other environmental models. The GIS Weasel provides geographic information system (GIS) tools to help create maps of geographic features relevant to a user's model and to generate parameters from those maps. The operation of the GIS Weasel does not require the user to be a GIS expert, only that the user have an understanding of the spatial information requirements of the environmental simulation model being used. The GIS Weasel software system uses a GIS-based graphical user interface (GUI), the C programming language, and external scripting languages. The software will run on any computing platform where ArcInfo Workstation (version 8.0.2 or later) and the GRID extension are accessible. The user controls the processing of the GIS Weasel by interacting with menus, maps, and tables. The purpose of this document is to describe the operation of the software. This document is not intended to describe the usage of this software in support of any particular environmental simulation model. Such guides are published separately.

A medical digital library to support scenario and user-tailored information retrieval.

PubMed

Chu, W W; Johnson, D B; Kangarloo, H

2000-06-01

Current large-scale information sources are designed to support general queries and lack the ability to support scenario-specific information navigation, gathering, and presentation. As a result, users are often unable to obtain desired specific information within a well-defined subject area. Today's information systems do not provide efficient content navigation, incremental appropriate matching, or content correlation. We are developing the following innovative technologies to remedy these problems: 1) scenario-based proxies, enabling the gathering and filtering of information customized for users within a pre-defined domain; 2) context-sensitive navigation and matching, providing approximate matching and similarity links when an exact match to a user's request is unavailable; 3) content correlation of documents, creating semantic links between documents and information sources; and 4) user models for customizing retrieved information and result presentation. A digital medical library is currently being constructed using these technologies to provide customized information for the user. The technologies are general in nature and can provide custom and scenario-specific information in many other domains (e.g., crisis management).

The Software Design Document: More than a User's Manual.

ERIC Educational Resources Information Center

Bowers, Dennis

1989-01-01

Discusses the value of creating design documentation for computer software so that it may serve as a model for similar design efforts. Components of the software design document are described, including program flowcharts, graphic representation of screen displays, storyboards, and evaluation procedures. An example is given using HyperCard. (three…

Basins 4.0 Climate Assessment Tool (Cat): Supporting Documentation and User Manual (External Review Draft)

EPA Science Inventory

EPA has released of the draft document solely for the purpose of pre-dissemination peer review under applicable Information Quality Guidelines (IQGs). This document has not been formally disseminated by EPA. It does not represent and should not be construed to represent any Agenc...

A Structured Model for Software Documentation.

ERIC Educational Resources Information Center

Swigger, Keith

The concept of "structured programming" was developed to facilitate software production, but it has not carried over to documentation design. Two concepts of structure are relevant to user documentation for computer programs. The first is based on programming techniques that emphasize decomposition of tasks into discrete modules, while the second…

SPEAKEASY HELP documents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fink, J.K.

1972-07-01

The HELP documents provide SPEAKEASY users with concise definitions of most of the words available in the current processors. In this report, the documents are given in a variety of formats to enable one to find specific information quickly. The bulk of this report consists of computer read-out of the HELP library via SPEAKEASY.

NASA STI Program Seminar: Electronic documents

NASA Technical Reports Server (NTRS)

1994-01-01

The theme of this NASA Scientific and Technical Information Program Seminar was electronic documents. Topics covered included Electronic Documents Management at the CASI, the Impact of Electronic Publishing on User Expectations and Searching Image Record Management, Secondary Publisher Considerations for Electronic Journal Literature, and the Technical Manual Publishing On Demand System (TMPODS).

Telecommunications Systems Design Techniques Handbook

NASA Technical Reports Server (NTRS)

Edelson, R. E. (Editor)

1972-01-01

The Deep Space Network (DSN) increasingly supports deep space missions sponsored and managed by organizations without long experience in DSN design and operation. The document is intended as a textbook for those DSN users inexperienced in the design and specification of a DSN-compatible spacecraft telecommunications system. For experienced DSN users, the document provides a reference source of telecommunication information which summarizes knowledge previously available only in a multitude of sources. Extensive references are quoted for those who wish to explore specific areas more deeply.

Space Launch System (SLS) Mission Planner's Guide

NASA Technical Reports Server (NTRS)

Smith, David Alan

2017-01-01

The purpose of this Space Launch System (SLS) Mission Planner's Guide (MPG) is to provide future payload developers/users with sufficient insight to support preliminary SLS mission planning. Consequently, this SLS MPG is not intended to be a payload requirements document; rather, it organizes and details SLS interfaces/accommodations in a manner similar to that of current Expendable Launch Vehicle (ELV) user guides to support early feasibility assessment. Like ELV Programs, once approved to fly on SLS, specific payload requirements will be defined in unique documentation.

Software Management Environment (SME) release 9.4 user reference material

NASA Technical Reports Server (NTRS)

Hendrick, R.; Kistler, D.; Manter, K.

1992-01-01

This document contains user reference material for the Software Management Environment (SME) prototype, developed for the Systems Development Branch (Code 552) of the Flight Dynamics Division (FDD) of Goddard Space Flight Center (GSFC). The SME provides an integrated set of management tools that can be used by software development managers in their day-to-day management and planning activities. This document provides an overview of the SME, a description of all functions, and detailed instructions concerning the software's installation and use.

AIDPRF/PRFAID user's manual

NASA Technical Reports Server (NTRS)

Buck, C. H.

1975-01-01

The program documentation for the PRF ARTWORK/AIDS conversion program, which serves as the interface between the outputs of the PRF ARTWORK and AIDS programs, was presented. The document has a two-fold purpose, the first of which is a description of the software design including flowcharts of the design at the functional level. The second purpose is to provide the user with a detailed description of the input parameters and formats necessary to execute the program and a description of the output produced when the program is executed.

ACCESS 1: Approximation Concepts Code for Efficient Structural Synthesis program documentation and user's guide

NASA Technical Reports Server (NTRS)

Miura, H.; Schmit, L. A., Jr.

1976-01-01

The program documentation and user's guide for the ACCESS-1 computer program is presented. ACCESS-1 is a research oriented program which implements a collection of approximation concepts to achieve excellent efficiency in structural synthesis. The finite element method is used for structural analysis and general mathematical programming algorithms are applied in the design optimization procedure. Implementation of the computer program, preparation of input data and basic program structure are described, and three illustrative examples are given.

Visual design for the user interface, Part 1: Design fundamentals.

PubMed

Lynch, P J

1994-01-01

Digital audiovisual media and computer-based documents will be the dominant forms of professional communication in both clinical medicine and the biomedical sciences. The design of highly interactive multimedia systems will shortly become a major activity for biocommunications professionals. The problems of human-computer interface design are intimately linked with graphic design for multimedia presentations and on-line document systems. This article outlines the history of graphic interface design and the theories that have influenced the development of today's major graphic user interfaces.

SMM-UVSP ozone profile inversion programs

NASA Technical Reports Server (NTRS)

Smith, H. J. P.

1983-01-01

The documentation and user manual for the software used to invert the UVSP aeronomy data taken by the SMM are provided. The programs are described together with their interfaces and what inputs are required from the user.

Computer program documentation user information for the RSO-tape print program (RSOPRNT)

NASA Technical Reports Server (NTRS)

Gibbs, P. M. (Principal Investigator)

1980-01-01

A user's guide for the RSOPRNT, a TRASYS Master Restart Output Tape (RSO) reader is presented. Background information and sample runstreams, as well as, references, input requirements and options, are included.

PHYSICO2: an UNIX based standalone procedure for computation of physicochemical, window-dependent and substitution based evolutionary properties of protein sequences along with automated block preparation tool, version 2.

PubMed

Banerjee, Shyamashree; Gupta, Parth Sarthi Sen; Nayek, Arnab; Das, Sunit; Sur, Vishma Pratap; Seth, Pratyay; Islam, Rifat Nawaz Ul; Bandyopadhyay, Amal K

2015-01-01

Automated genome sequencing procedure is enriching the sequence database very fast. To achieve a balance between the entry of sequences in the database and their analyses, efficient software is required. In this end PHYSICO2, compare to earlier PHYSICO and other public domain tools, is most efficient in that it i] extracts physicochemical, window-dependent and homologousposition-based-substitution (PWS) properties including positional and BLOCK-specific diversity and conservation, ii] provides users with optional-flexibility in setting relevant input-parameters, iii] helps users to prepare BLOCK-FASTA-file by the use of Automated Block Preparation Tool of the program, iv] performs fast, accurate and user-friendly analyses and v] redirects itemized outputs in excel format along with detailed methodology. The program package contains documentation describing application of methods. Overall the program acts as efficient PWS-analyzer and finds application in sequence-bioinformatics. PHYSICO2: is freely available at http://sourceforge.net/projects/physico2/ along with its documentation at https://sourceforge.net/projects/physico2/files/Documentation.pdf/download for all users.

PHYSICO2: an UNIX based standalone procedure for computation of physicochemical, window-dependent and substitution based evolutionary properties of protein sequences along with automated block preparation tool, version 2

PubMed Central

Banerjee, Shyamashree; Gupta, Parth Sarthi Sen; Nayek, Arnab; Das, Sunit; Sur, Vishma Pratap; Seth, Pratyay; Islam, Rifat Nawaz Ul; Bandyopadhyay, Amal K

2015-01-01

Automated genome sequencing procedure is enriching the sequence database very fast. To achieve a balance between the entry of sequences in the database and their analyses, efficient software is required. In this end PHYSICO2, compare to earlier PHYSICO and other public domain tools, is most efficient in that it i] extracts physicochemical, window-dependent and homologousposition-based-substitution (PWS) properties including positional and BLOCK-specific diversity and conservation, ii] provides users with optional-flexibility in setting relevant input-parameters, iii] helps users to prepare BLOCK-FASTA-file by the use of Automated Block Preparation Tool of the program, iv] performs fast, accurate and user-friendly analyses and v] redirects itemized outputs in excel format along with detailed methodology. The program package contains documentation describing application of methods. Overall the program acts as efficient PWS-analyzer and finds application in sequence-bioinformatics. Availability PHYSICO2: is freely available at http://sourceforge.net/projects/physico2/ along with its documentation at https://sourceforge.net/projects/physico2/files/Documentation.pdf/download for all users. PMID:26339154

Save medical personnel's time by improved user interfaces.

PubMed

Kindler, H

1997-01-01

Common objectives in the industrial countries are the improvement of quality of care, clinical effectiveness, and cost control. Cost control, in particular, has been addressed through the introduction of case mix systems for reimbursement by social-security institutions. More data is required to enable quality improvement, increases in clinical effectiveness and for juridical reasons. At first glance, this documentation effort is contradictory to cost reduction. However, integrated services for resource management based on better documentation should help to reduce costs. The clerical effort for documentation should be decreased by providing a co-operative working environment for healthcare professionals applying sophisticated human-computer interface technology. Additional services, e.g., automatic report generation, increase the efficiency of healthcare personnel. Modelling the medical work flow forms an essential prerequisite for integrated resource management services and for co-operative user interfaces. A user interface aware of the work flow provides intelligent assistance by offering the appropriate tools at the right moment. Nowadays there is a trend to client/server systems with relational databases or object-oriented databases as repository. The work flows used for controlling purposes and to steer the user interfaces must be represented in the repository.

Home Computer and Internet User Security

DTIC Science & Technology

2005-01-01

Information Security Model © 2005 Carnegie Mellon University (Lawrence R. Rogers, Author) Home Computer and Internet User Security...Carnegie Mellon University (Lawrence R. Rogers, Author) Home Computer and Internet User Security Version 1.0.4 – slide 50 Contact Information Lawrence R. Rogers • Email: cert@cert.org CERT website: http://www.cert.org/ ...U.S. Patent and Trademark Office Home Computer and Internet User Security Report Documentation Page Form ApprovedOMB

Information Hang-Ups; Problems Encountered by Users of the Technical Information Services Offered by DDC and CFSTI, with Recommendations for the Future.

ERIC Educational Resources Information Center

Committee of DDC Users in the Greater Washington, DC. Area, Washington, DC.

A change in policy of the Defense Documentation Center (DDC) with regard to supplying hard copy and/or microforms of reports caused problems to users of the DDC Technical Report Service. Discussions among users of the service, a questionnaire survey and committee reports summarized basic user concerns, provided selected statistics and a look at…

User documentation for the FHWA Carpool Matching Program (second edition)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1975-01-01

This document provides persons interested in computerized carpool/buspool matching programs a complete description of the user documentation for the FHWA Carpool Matching Program. The FHWA program is written in American National Standard COBOL and thus should be readily transferable to environments other than the IBM 360/65 (OS) under which it has been developed and tested. The program has a compiled time core requirement of 110K and a maximum execution time core requirement of 110K. While considerable effort has been made to test the program in several applications and to achieve accuracy and completeness in the program and supporting documentation, themore » FHWA cannot guarantee the proper operation of this program by any user nor can it assume liability for any damage, loss, or inconvenience resulting from the operation of this program or the results obtained thereby. This present version of the carpool matching program represents the latest version of the first generation of an ongoing multi-phase process of improvements and refinements. The ultimate goal is an effective carpool and transit information system that will produce individualized information covering not only carpooling opportunities, but also transit routing, scheduling, and other identifying information for the commuter. (MCW)« less

Xyce Parallel Electronic Simulator Reference Guide Version 6.7.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keiter, Eric R.; Aadithya, Karthik Venkatraman; Mei, Ting

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce . This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide [1] . The information herein is subject to change without notice. Copyright c 2002-2017 Sandia Corporation. All rights reserved. Trademarks Xyce TM Electronic Simulator and Xyce TMmore » are trademarks of Sandia Corporation. Orcad, Orcad Capture, PSpice and Probe are registered trademarks of Cadence Design Systems, Inc. Microsoft, Windows and Windows 7 are registered trademarks of Microsoft Corporation. Medici, DaVinci and Taurus are registered trademarks of Synopsys Corporation. Amtec and TecPlot are trademarks of Amtec Engineering, Inc. All other trademarks are property of their respective owners. Contacts World Wide Web http://xyce.sandia.gov https://info.sandia.gov/xyce (Sandia only) Email xyce@sandia.gov (outside Sandia) xyce-sandia@sandia.gov (Sandia only) Bug Reports (Sandia only) http://joseki-vm.sandia.gov/bugzilla http://morannon.sandia.gov/bugzilla« less

Life Cycle Management Considerations of Remotely Sensed Geospatial Data and Documentation for Long Term Preservation

NASA Technical Reports Server (NTRS)

Khayat, Mohammad G.; Kempler, Steven J.

2015-01-01

As geospatial missions age, one of the challenges for the usability of data is the availability of relevant and updated metadata with sufficient documentation that can be used by future generations of users to gain knowledge from the original data. Given that remote sensing data undergo many intermediate processing steps, for example, an understanding of the exact algorithms employed and the quality of that data produced, could be key considerations for these users. As interest in global climate data is increasing, documentation about older data, their origins, and provenance are valuable to first time users attempting to perform historical climate research or comparative analysis of global change. Incomplete or missing documentation could be what stands in the way of a new researcher attempting to use the data. Therefore, preservation of documentation and related metadata is sometimes just as critical as the preservation of the original observational data. The Goddard Earth Sciences - Data and Information Service Center (GES DISC), a NASA Earth science Distributed Active Archive Center (DAAC), that falls under the management structure of the Earth Science Data and Information System (ESDIS), is actively pursuing the preservation of all necessary artifacts needed by future users. In this paper we will detail the data custodial planning and the data lifecycle process developed for content preservation, our implementation of a Preservation System to safeguard documents and associated artifacts from legacy (older) missions, as well as detail lessons learned regarding access rights and confidentiality of information issues. We also elaborate on key points that made our preservation effort successful; the primary points being: the drafting of a governing baseline for historical data preservation from satellite missions, and using the historical baseline as a guide to content filtering of what documents to preserve. The Preservation System currently archives documentation content for High Resolution Dynamics Limb Sounder (HIRDLS), Upper Atmosphere Research Satellite (UARS), Total Ozone Mapping Spectrometer (TOMS), and the 1960's era Nimbus mission. Documentation from other missions like the Tropical Rainfall Measuring Mission (TRMM), the Ozone Monitoring Instrument (OMI), and the Atmospheric Infra-Red Sounder (AIRS) are also slated to be added to this repository, as well as the other mission datasets to be preserved at the GES DISC.

DOS-32 User's Manual

DOT National Transportation Integrated Search

1973-01-01

This manual describes the internal workings of the Disk Operating System (DOS-32 for the Noneywell H - 632 computer. DOS - 32 is a core resident, one user, console oriented operating system written primarily in FORTRAN. A companion document DOS - 32 ...

Efficient Verification of Holograms Using Mobile Augmented Reality.

PubMed

Hartl, Andreas Daniel; Arth, Clemens; Grubert, Jens; Schmalstieg, Dieter

2016-07-01

Paper documents such as passports, visas and banknotes are frequently checked by inspection of security elements. In particular, optically variable devices such as holograms are important, but difficult to inspect. Augmented Reality can provide all relevant information on standard mobile devices. However, hologram verification on mobiles still takes long and provides lower accuracy than inspection by human individuals using appropriate reference information. We aim to address these drawbacks by automatic matching combined with a special parametrization of an efficient goal-oriented user interface which supports constrained navigation. We first evaluate a series of similarity measures for matching hologram patches to provide a sound basis for automatic decisions. Then a re-parametrized user interface is proposed based on observations of typical user behavior during document capture. These measures help to reduce capture time to approximately 15 s with better decisions regarding the evaluated samples than what can be achieved by untrained users.

Waste treatability guidance program. User`s guide. Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toth, C.

1995-12-21

DOE sites across the country generate and manage radioactive, hazardous, mixed, and sanitary wastes. It is necessary for each site to find the technologies and associated capacities required to manage its waste. One role of DOE HQ Office of Environmental Restoration and Waste Management is to facilitate the integration of the site- specific plans into coherent national plans. DOE has developed a standard methodology for defining and categorizing waste streams into treatability groups based on characteristic parameters that influence waste management technology needs. This Waste Treatability Guidance Program automates the Guidance Document for the categorization of waste information into treatabilitymore » groups; this application provides a consistent implementation of the methodology across the National TRU Program. This User`s Guide provides instructions on how to use the program, including installations instructions and program operation. This document satisfies the requirements of the Software Quality Assurance Plan.« less

Databank Software for the 1990s and Beyond--Part 1: The User's Wish List.

ERIC Educational Resources Information Center

Basch, Reva

1990-01-01

Describes desired software enhancements identified by the Southern California Online Users Group in the areas of search language, database selection, document retrieval and display, user interface, customer support, and cost and economic issues. The need to prioritize these wishes and to determine whether features should reside in the mainframe or…

Longitudinal Surveys of Australian Youth (LSAY) 2003 Cohort: User Guide. Technical Report 54

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

The Longitudinal Surveys of Australian Youth (LSAY) is a research program that tracks young people as they move from school into further study, work and other destinations. This "User guide" has been developed for users of the LSAY data. The guide endeavours to consolidate existing technical documentation and other relevant information…

Analyses of User Rationality and System Learnability: Performing Task Variants in User Tests

ERIC Educational Resources Information Center

Law, Effie Lai-Chong; Blazic, Borka Jerman; Pipan, Matic

2007-01-01

No systematic empirical study on investigating the effects of performing task variants on user cognitive strategy and behaviour in usability tests and on learnability of the system being tested has been documented in the literature. The current use-inspired basic research work aims to identify the underlying cognitive mechanisms and the practical…

User Choice Resourcing Arrangements in Australia in March 2004. Working Paper No. 57

ERIC Educational Resources Information Center

Selby Smith, C.

2005-01-01

As part of a charge to assist the Australian National Training Authority (ANTA) to co-ordinate the development of relevant User Choice resourcing arrangements, CEET documented existing User Choice resourcing arrangements in each jurisdiction as of March 31, 2004. Emails were sent to each jurisdiction asking them to provide information on the User…

Assessment of the Adequacy of U.S.-Canadian Infrastructure to Accommodate Trade through Eastern Border Crossings. Appendix 1. Descriptive Profiles of Maine Frontier

DOT National Transportation Integrated Search

1999-06-08

This document describes the process used in developing a list of rural Intelligent Transportation Systems (ITS) user needs. It gives information on a workshop focusing on rural ITS user needs, and it also presents a list of rural ITS user needs based...

78 FR 46970 - Medical Device User Fee Rates for Fiscal Year 2014

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

...] Medical Device User Fee Rates for Fiscal Year 2014 AGENCY: Food and Drug Administration, HHS. ACTION... procedures for medical device user fees for fiscal year (FY) 2014. The Federal Food, Drug, and Cosmetic Act.... The FY 2014 fee rates are provided in this document. These fees apply from October 1, 2013, through...

ADP (Automated Data Processing) Requirements Definition and Documentation through User-Developed Prototypes.

DTIC Science & Technology

1988-04-01

devices of the language. When you think of a television show, a mental picture quickly flashes in your mind of the actor or actress who represents that...iteratively determine and validate what data the user needs displayed, how should will look ( i.e. color vs black and while and resolution) to the user and

What Friends Are For: Collaborative Intelligence Analysis and Search

DTIC Science & Technology

2014-06-01

14. SUBJECT TERMS Intelligence Community, information retrieval, recommender systems , search engines, social networks, user profiling, Lucene...improvements over existing search systems . The improvements are shown to be robust to high levels of human error and low similarity between users ...precision NOLH nearly orthogonal Latin hypercubes P@ precision at documents RS recommender systems TREC Text REtrieval Conference USM user

PIMS-Universal Payload Information Management

NASA Technical Reports Server (NTRS)

Elmore, Ralph; McNair, Ann R. (Technical Monitor)

2002-01-01

As the overall manager and integrator of International Space Station (ISS) science payloads and experiments, the Payload Operations Integration Center (POIC) at Marshall Space Flight Center had a critical need to provide an information management system for exchange and management of ISS payload files as well as to coordinate ISS payload related operational changes. The POIC's information management system has a fundamental requirement to provide secure operational access not only to users physically located at the POIC, but also to provide collaborative access to remote experimenters and International Partners. The Payload Information Management System (PIMS) is a ground based electronic document configuration management and workflow system that was built to service that need. Functionally, PIMS provides the following document management related capabilities: 1. File access control, storage and retrieval from a central repository vault. 2. Collect supplemental data about files in the vault. 3. File exchange with a PMS GUI client, or any FTP connection. 4. Files placement into an FTP accessible dropbox for pickup by interfacing facilities, included files transmitted for spacecraft uplink. 5. Transmission of email messages to users notifying them of new version availability. 6. Polling of intermediate facility dropboxes for files that will automatically be processed by PIMS. 7. Provide an API that allows other POIC applications to access PIMS information. Functionally, PIMS provides the following Change Request processing capabilities: 1. Ability to create, view, manipulate, and query information about Operations Change Requests (OCRs). 2. Provides an adaptable workflow approval of OCRs with routing through developers, facility leads, POIC leads, reviewers, and implementers. Email messages can be sent to users either involving them in the workflow process or simply notifying them of OCR approval progress. All PIMS document management and OCR workflow controls are coordinated through and routed to individual user's "to do" list tasks. A user is given a task when it is their turn to perform some action relating to the approval of the Document or OCR. The user's available actions are restricted to only functions available for the assigned task. Certain actions, such as review or action implementation by non-PIMS users, can also be coordinated through automated emails.

Photoacoustic infrared spectroscopy for conducting gas tracer tests and measuring water saturations in landfills

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jung, Yoojin; Han, Byunghyun; Mostafid, M. Erfan

2012-02-15

Highlights: Black-Right-Pointing-Pointer Photoacoustic infrared spectroscopy tested for measuring tracer gas in landfills. Black-Right-Pointing-Pointer Measurement errors for tracer gases were 1-3% in landfill gas. Black-Right-Pointing-Pointer Background signals from landfill gas result in elevated limits of detection. Black-Right-Pointing-Pointer Technique is much less expensive and easier to use than GC. - Abstract: Gas tracer tests can be used to determine gas flow patterns within landfills, quantify volatile contaminant residence time, and measure water within refuse. While gas chromatography (GC) has been traditionally used to analyze gas tracers in refuse, photoacoustic spectroscopy (PAS) might allow real-time measurements with reduced personnel costs and greater mobilitymore » and ease of use. Laboratory and field experiments were conducted to evaluate the efficacy of PAS for conducting gas tracer tests in landfills. Two tracer gases, difluoromethane (DFM) and sulfur hexafluoride (SF{sub 6}), were measured with a commercial PAS instrument. Relative measurement errors were invariant with tracer concentration but influenced by background gas: errors were 1-3% in landfill gas but 4-5% in air. Two partitioning gas tracer tests were conducted in an aerobic landfill, and limits of detection (LODs) were 3-4 times larger for DFM with PAS versus GC due to temporal changes in background signals. While higher LODs can be compensated by injecting larger tracer mass, changes in background signals increased the uncertainty in measured water saturations by up to 25% over comparable GC methods. PAS has distinct advantages over GC with respect to personnel costs and ease of use, although for field applications GC analyses of select samples are recommended to quantify instrument interferences.« less

FPGA chip performance improvement with gate shrink through alternating PSM 90nm process

NASA Astrophysics Data System (ADS)

Yu, Chun-Chi; Shieh, Ming-Feng; Liu, Erick; Lin, Benjamin; Ho, Jonathan; Wu, Xin; Panaite, Petrisor; Chacko, Manoj; Zhang, Yunqiang; Lei, Wen-Kang

2005-11-01

In the post-physical verification space called 'Mask Synthesis' a key component of design-for-manufacturing (DFM), double-exposure based, dark-field, alternating PSM (Alt-PSM) is being increasingly applied at the 90nm node in addition with other mature resolution enhancement techniques (RETs) such as optical proximity correction (OPC) and sub-resolution assist features (SRAF). Several high-performance IC manufacturers already use alt-PSM technology in 65nm production. At 90nm having strong control over the lithography process is a critical component in meeting targeted yield goals. However, implementing alt-PSM in production has been challenging due to several factors such as phase conflict errors, mask manufacturing, and the increased production cost due to the need for two masks in the process. Implementation of Alt-PSM generally requires phase compliance rules and proper phase topology in the layout and this has been successful for the technology node with these rules implemented. However, this may not be true for a mature, production process technology, in this case 90 nm. Especially, in the foundry-fabless business model where the foundry provides a standard set of design rules to its customers for a given process technology, and where not all the foundry customers require Alt-PSM in their tapeout flow. With minimum design changes, design houses usually are motivated by higher product performance for the existing designs. What follows is an in-depth review of the motivation to apply alt-PSM on a production FPGA, the DFM challenges to each partner faced, its effect on the tapeout flow, and how design, manufacturing, and EDA teams worked together to resolve phase conflicts, tapeout the chip, and finally verify the silicon results in production.

Surveillance for microbes and range expansion in house sparrows

PubMed Central

Martin, Lynn B.; Coon, Courtney A. C.; Liebl, Andrea L.; Schrey, Aaron W.

2014-01-01

Interactions between hosts and parasites influence the success of host introductions and range expansions post-introduction. However, the physiological mechanisms mediating these outcomes are little known. In some vertebrates, variation in the regulation of inflammation has been implicated, perhaps because inflammation imparts excessive costs, including high resource demands and collateral damage upon encounter with novel parasites. Here, we tested the hypothesis that variation in the regulation of inflammation contributed to the spread of house sparrows (Passer domesticus) across Kenya, one of the world's most recent invasions of this species. Specifically, we asked whether inflammatory gene expression declines with population age (i.e. distance from Mombasa (dfM), the site of introduction around 1950). We compared expression of two microbe surveillance molecules (Toll-like receptors, TLRs-2 and 4) and a proinflammatory cytokine (interleukin-6, IL-6) before and after an injection of an immunogenic component of Gram-negative bacteria (lipopolysaccharide, LPS) among six sparrow populations. We then used a best-subset model selection approach to determine whether population age (dfM) or other factors (e.g. malaria or coccidian infection, sparrow density or genetic group membership) best-explained gene expression. For baseline expression of TLR-2 and TLR-4, population age tended to be the best predictor with expression decreasing with population age, although other factors were also important. Induced expression of TLRs was affected by LPS treatment alone. For induced IL-6, only LPS treatment reliably predicted expression; baseline expression was not explained by any factor. These data suggest that changes in microbe surveillance, more so than downstream control of inflammation via cytokines, might have been important to the house sparrow invasion of Kenya. PMID:24258722

New method of 2-dimensional metrology using mask contouring

NASA Astrophysics Data System (ADS)

Matsuoka, Ryoichi; Yamagata, Yoshikazu; Sugiyama, Akiyuki; Toyoda, Yasutaka

2008-10-01

We have developed a new method of accurately profiling and measuring of a mask shape by utilizing a Mask CD-SEM. The method is intended to realize high accuracy, stability and reproducibility of the Mask CD-SEM adopting an edge detection algorithm as the key technology used in CD-SEM for high accuracy CD measurement. In comparison with a conventional image processing method for contour profiling, this edge detection method is possible to create the profiles with much higher accuracy which is comparable with CD-SEM for semiconductor device CD measurement. This method realizes two-dimensional metrology for refined pattern that had been difficult to measure conventionally by utilizing high precision contour profile. In this report, we will introduce the algorithm in general, the experimental results and the application in practice. As shrinkage of design rule for semiconductor device has further advanced, an aggressive OPC (Optical Proximity Correction) is indispensable in RET (Resolution Enhancement Technology). From the view point of DFM (Design for Manufacturability), a dramatic increase of data processing cost for advanced MDP (Mask Data Preparation) for instance and surge of mask making cost have become a big concern to the device manufacturers. This is to say, demands for quality is becoming strenuous because of enormous quantity of data growth with increasing of refined pattern on photo mask manufacture. In the result, massive amount of simulated error occurs on mask inspection that causes lengthening of mask production and inspection period, cost increasing, and long delivery time. In a sense, it is a trade-off between the high accuracy RET and the mask production cost, while it gives a significant impact on the semiconductor market centered around the mask business. To cope with the problem, we propose the best method of a DFM solution using two-dimensional metrology for refined pattern.

DFM flow by using combination between design based metrology system and model based verification at sub-50nm memory device

NASA Astrophysics Data System (ADS)

Kim, Cheol-kyun; Kim, Jungchan; Choi, Jaeseung; Yang, Hyunjo; Yim, Donggyu; Kim, Jinwoong

2007-03-01

As the minimum transistor length is getting smaller, the variation and uniformity of transistor length seriously effect device performance. So, the importance of optical proximity effects correction (OPC) and resolution enhancement technology (RET) cannot be overemphasized. However, OPC process is regarded by some as a necessary evil in device performance. In fact, every group which includes process and design, are interested in whole chip CD variation trend and CD uniformity, which represent real wafer. Recently, design based metrology systems are capable of detecting difference between data base to wafer SEM image. Design based metrology systems are able to extract information of whole chip CD variation. According to the results, OPC abnormality was identified and design feedback items are also disclosed. The other approaches are accomplished on EDA companies, like model based OPC verifications. Model based verification will be done for full chip area by using well-calibrated model. The object of model based verification is the prediction of potential weak point on wafer and fast feed back to OPC and design before reticle fabrication. In order to achieve robust design and sufficient device margin, appropriate combination between design based metrology system and model based verification tools is very important. Therefore, we evaluated design based metrology system and matched model based verification system for optimum combination between two systems. In our study, huge amount of data from wafer results are classified and analyzed by statistical method and classified by OPC feedback and design feedback items. Additionally, novel DFM flow would be proposed by using combination of design based metrology and model based verification tools.

Evaluating Combinations of Ranked Lists and Visualizations of Inter-Document Similarity.

ERIC Educational Resources Information Center

Allan, James; Leuski, Anton; Swan, Russell; Byrd, Donald

2001-01-01

Considers how ideas from document clustering can be used to improve retrieval accuracy of ranked lists in interactive systems and how to evaluate system effectiveness. Describes a TREC (Text Retrieval Conference) study that constructed and evaluated systems that present the user with ranked lists and a visualization of inter-document similarities.…

VET in Schools 2016: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2017

2017-01-01

This document covers the data terms used in the "VET in Schools 2016" summary publication. The primary purpose of this document is to assist users to understand the specific data terms. Terms that appear in the publication are listed in alphabetical order with the following information provided for each: (1) definition: a brief…

Apprentices and Trainees: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2017

2017-01-01

This document covers the data terms used in publications sourced from the National Apprentice and Trainee Collection and their associated data tables. The primary purpose of this document is to assist users of the publications to understand the specific data terms used within them. Terms are listed in alphabetical order with the following…

Students and Courses--Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2014

2014-01-01

This document covers the data terms used in publications sourced from the National VET Provider Collection and their associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within them. Terms that appear in the publications and data items are listed in…

Document Concurrence System

NASA Technical Reports Server (NTRS)

Muhsin, Mansour; Walters, Ian

2004-01-01

The Document Concurrence System is a combination of software modules for routing users expressions of concurrence with documents. This system enables determination of the current status of concurrences and eliminates the need for the prior practice of manually delivering paper documents to all persons whose approvals were required. This system runs on a server, and participants gain access via personal computers equipped with Web-browser and electronic-mail software. A user can begin a concurrence routing process by logging onto an administration module, naming the approvers and stating the sequence for routing among them, and attaching documents. The server then sends a message to the first person on the list. Upon concurrence by the first person, the system sends a message to the second person, and so forth. A person on the list indicates approval, places the documents on hold, or indicates disapproval, via a Web-based module. When the last person on the list has concurred, a message is sent to the initiator, who can then finalize the process through the administration module. A background process running on the server identifies concurrence processes that are overdue and sends reminders to the appropriate persons.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trott, Christian Robert; Lopez, Graham; Shipman, Galen

This report documents the completion of milestone STPM12-2 Kokkos User Support Infrastructure. The goal of this milestone was to develop and deploy an initial Kokkos support infrastructure, which facilitates communication and growth of the user community, adds a central place for user documentation and manages access to technical experts. Multiple possible support infrastructure venues were considered and a solution was put into place by Q1 of FY 18 consisting of (1) a Wiki programming guide, (2) github issues and projects for development planning and bug tracking and (3) a “Slack” channel for low latency support communications with the Kokkos usermore » community. Furthermore, the desirability of a cloud based training infrastructure was recognized and put in place in order to support training events.« less

Investigations into mirror fabrication metrology analysis

NASA Technical Reports Server (NTRS)

Dimmock, John O.

1994-01-01

This final report describes the work performed under this delivery order from June 1993 through August 1994. The scope of work included three distinct tasks in support of the AXAF-I program. The objective of the first task was to perform investigations of the grinding and polishing characteristics of the zerodur material by fabricating several samples. The second task was to continue the development of the integrated optical performance modeling software for AXAF-I. The purpose of third and final task was to develop and update the database of AXAF technical documents for an easy and rapid access. The MSFC optical and metrology shops were relocated from the B-wing of Building 4487 to Room BC 144 of Building 4466 in the beginning of this contract. This included dismantling, packing, and moving the equipment from its old location, and then reassembling it at the new location. A total of 65 zerodur samples, measuring 1 inch x 2 inches x 6 inches were ground and polished to a surface figure of lambda/10 p-v, and a surface finish of 5A rms were fabricated for coating tests. A number of special purpose tools and metal mirrors were also fabricated to support various AXAF-I development activities. In the metrology area, the ZYGO Mark 4 interferometer was relocated and also upgraded with a faster and more powerful processor. Surface metrology work was also performed on the coating samples and other optics using ZYGO interferometer and WYKO profilometer. A number of new features have been added to the GRAZTRACE program to enhance its analysis and modeling capabilities. A number of new commands have been added to the command mode GRAZTRACE program to provide a better control to the user on the program execution and data manipulation. Some commands and parameter entries have been reorganized for a uniform format. The command mode version of the convolution program CONVOLVE has been developed. An on-line help system and a user's manual have also been developed for the benefit of the users. The database of AXAF technical documents continues to progress. The titles, company name, date, and location of over 390 documents have been entered in this database. This database provides both a data search and retrieval function, and a data adding function. These functions allow a user to quickly search the data files for documents or add new information. A detailed user's guide has also been prepared. This user guide includes a document classification guide, a list of abbreviations, and a list of acronyms, which have been used in compiling this database of AXAF-I technical documents.

NREL: U.S. Life Cycle Inventory Database - Publications

Science.gov Websites

Publications Planning Documents U.S. Life Cycle Inventory Database Roadmap, February 2009 U.S. Life Cycle Inventory User Survey, February 2009 U.S. LCI Database Factsheet, March 2005 User's Guide for Life

Your Travtek Driving Experience -- Rental Users Study Data Summary

DOT National Transportation Integrated Search

1993-11-01

THIS REPORT DOCUMENTS THE QUESTIONNAIRE DATA COLLECTED AND THE INSTRUMENTS USED FOR THE TRAVTEK EVALUATION TASK BL - RENTAL USERS STUDY. IT PRESENTS SUMMARY STATISTICS FOR THE PRIMARY DRIVERS DERIVED FROM THE RENTER STUDY, WHICH WAS CONDUCTED FROM MA...

C-TIC Console Operator's User Manual

DOT National Transportation Integrated Search

1996-07-01

The C-TIC Console Operator's User Manual is designed to assist the operator at : the Corridor Transportation Information Center with the navigation and use of : the application programs in the C-TIC. This document will concentrate solely on : the ext...

Birth/death process model

NASA Technical Reports Server (NTRS)

Solloway, C. B.; Wakeland, W.

1976-01-01

First-order Markov model developed on digital computer for population with specific characteristics. System is user interactive, self-documenting, and does not require user to have complete understanding of underlying model details. Contains thorough error-checking algorithms on input and default capabilities.

Prototype road weather performance management (RWPM) tool installation instructions & user manual.

DOT National Transportation Integrated Search

2016-07-20

This document is the Installation Instructions and User Manual for the Road Weather Performance Management (RW-PM) Tool developed for the project on Development and Demonstration of a Prototype Road Weather Performance Management Application that Use...

Prototype road weather performance management tool : installation instructions & user manual.

DOT National Transportation Integrated Search

2016-07-20

This document is the Installation Instructions and User Manual for the Road Weather Performance Management (RW-PM) Tool developed for the project on Development and Demonstration of a Prototype Road Weather Performance Management Application that Use...

Semantic Similarity between Web Documents Using Ontology

NASA Astrophysics Data System (ADS)

Chahal, Poonam; Singh Tomer, Manjeet; Kumar, Suresh

2018-06-01

The World Wide Web is the source of information available in the structure of interlinked web pages. However, the procedure of extracting significant information with the assistance of search engine is incredibly critical. This is for the reason that web information is written mainly by using natural language, and further available to individual human. Several efforts have been made in semantic similarity computation between documents using words, concepts and concepts relationship but still the outcome available are not as per the user requirements. This paper proposes a novel technique for computation of semantic similarity between documents that not only takes concepts available in documents but also relationships that are available between the concepts. In our approach documents are being processed by making ontology of the documents using base ontology and a dictionary containing concepts records. Each such record is made up of the probable words which represents a given concept. Finally, document ontology's are compared to find their semantic similarity by taking the relationships among concepts. Relevant concepts and relations between the concepts have been explored by capturing author and user intention. The proposed semantic analysis technique provides improved results as compared to the existing techniques.

Semantic Similarity between Web Documents Using Ontology

NASA Astrophysics Data System (ADS)

Chahal, Poonam; Singh Tomer, Manjeet; Kumar, Suresh

2018-03-01

The World Wide Web is the source of information available in the structure of interlinked web pages. However, the procedure of extracting significant information with the assistance of search engine is incredibly critical. This is for the reason that web information is written mainly by using natural language, and further available to individual human. Several efforts have been made in semantic similarity computation between documents using words, concepts and concepts relationship but still the outcome available are not as per the user requirements. This paper proposes a novel technique for computation of semantic similarity between documents that not only takes concepts available in documents but also relationships that are available between the concepts. In our approach documents are being processed by making ontology of the documents using base ontology and a dictionary containing concepts records. Each such record is made up of the probable words which represents a given concept. Finally, document ontology's are compared to find their semantic similarity by taking the relationships among concepts. Relevant concepts and relations between the concepts have been explored by capturing author and user intention. The proposed semantic analysis technique provides improved results as compared to the existing techniques.

Development of Methodologic Tools for Planning and Managing Library Services: II. Measuring a Library's Capability for Providing Documents *

PubMed Central

Orr, Richard H.; Pings, Vern M.; Pizer, Irwin H.; Olson, Edwin E.; Spencer, Carol C.

1968-01-01

A method of measuring a library's capability for providing the documents its users need has been developed. The library is tested with a representative sample of such documents to determine how long would be required for users to obtain these documents. Test results are expressed in terms of a Capability Index, which has a maximal value of 100 only if all the sample documents are found “on shelf.” Specific tests employing samples of 300 documents have been developed that are appropriate for academic and for “reservoir” biomedical libraries. Realistic field trials have demonstrated that these two tests are practical to administer and that test results are adequately reproducible. When strict comparability is not important, a library can test itself. In assessing a reservoir library, test results are supplemented by data on its typical processing time for interlibrary loan requests. Currently these tests are being used in a national survey. The general method is applicable to other types of libraries, provided appropriate test samples are established. If their limitations are clearly understood, these “Document Delivery Tests” can be valuable tools for planning and managing library services. PMID:5665969

Social tagging in the life sciences: characterizing a new metadata resource for bioinformatics.

PubMed

Good, Benjamin M; Tennis, Joseph T; Wilkinson, Mark D

2009-09-25

Academic social tagging systems, such as Connotea and CiteULike, provide researchers with a means to organize personal collections of online references with keywords (tags) and to share these collections with others. One of the side-effects of the operation of these systems is the generation of large, publicly accessible metadata repositories describing the resources in the collections. In light of the well-known expansion of information in the life sciences and the need for metadata to enhance its value, these repositories present a potentially valuable new resource for application developers. Here we characterize the current contents of two scientifically relevant metadata repositories created through social tagging. This investigation helps to establish how such socially constructed metadata might be used as it stands currently and to suggest ways that new social tagging systems might be designed that would yield better aggregate products. We assessed the metadata that users of CiteULike and Connotea associated with citations in PubMed with the following metrics: coverage of the document space, density of metadata (tags) per document, rates of inter-annotator agreement, and rates of agreement with MeSH indexing. CiteULike and Connotea were very similar on all of the measurements. In comparison to PubMed, document coverage and per-document metadata density were much lower for the social tagging systems. Inter-annotator agreement within the social tagging systems and the agreement between the aggregated social tagging metadata and MeSH indexing was low though the latter could be increased through voting. The most promising uses of metadata from current academic social tagging repositories will be those that find ways to utilize the novel relationships between users, tags, and documents exposed through these systems. For more traditional kinds of indexing-based applications (such as keyword-based search) to benefit substantially from socially generated metadata in the life sciences, more documents need to be tagged and more tags are needed for each document. These issues may be addressed both by finding ways to attract more users to current systems and by creating new user interfaces that encourage more collectively useful individual tagging behaviour.

Exploring driver acceptance of in-vehicle information systems

DOT National Transportation Integrated Search

1998-01-01

This document is part of an integrated program to develop human factors guidelines for advanced in-vehicle information systems. This document provides both an analytic and empirical determination of the human factors issues specific to user acceptanc...

Specification of the Transmitted Signal of the Omega Navigation System.

DOT National Transportation Integrated Search

1984-01-01

This report documents the specification of the transmitted signal to the OMEGA Navigation System. It is intended as a reference document consisting of specifications, definitions, and explanations for general use by designers, manufacturers, and user...

PHABSIM for Windows User's Manual and Exercises

USGS Publications Warehouse

Waddle, Terry

2001-01-01

This document is a combined self-study textbook and reference manual. The material is presented in the general order of a PHABSIM study placed within the context of an IFIM application. The document may also be used as reading material for a lecture-based course. This manual provides documentation of the various PHABSIM programs so every option of each program is treated.This text is not a guidebook for organization and implementation of a PHABSIM study. Use of PHABSIM should take place in the context of an IFIM application. See Bovee et al. (1998) for guidance in designing and performing a PHABSIM study as part of a larger IFIM application.The document concludes with a set of 12 laboratory exercises. Users are strongly encouraged to work through the laboratory exercises prior to applying the software to a study. Working through the exercises will enhance familiarity with the programs and answer many questions that may arise during a PHABSIM analysis.

Considerations regarding the deployment of hypermedia at JSC

NASA Technical Reports Server (NTRS)

Kacmar, Charles J.

1993-01-01

Electronic documents and systems are becoming the primary means of managing information for ground and space operations at NASA. These documents will utilize hypertext and hypermedia technologies to aid users in structuring and accessing information. Documents will be composed of static and dynamic data consisting of user-defined annotations and hypermedia links. The report consists of three major sections. First, it provides an overview of hypermedia and surveys the use of hypermedia throughout JSC. Second, it briefly describes a prototypical hypermedia system that was developed in conjunction with this work. This system was constructed to demonstrate various hypermedia features and to serve as a platform for supporting the electronic documentation needs for the MIDAS system developed by the Intelligent Systems Branch of the Automation and Robotics Division (Pac92). Third, it discusses emerging hypermedia technologies which have either been untapped by vendors or present significant challenges to the Agency.

DEVA: An extensible ontology-based annotation model for visual document collections

NASA Astrophysics Data System (ADS)

Jelmini, Carlo; Marchand-Maillet, Stephane

2003-01-01

The description of visual documents is a fundamental aspect of any efficient information management system, but the process of manually annotating large collections of documents is tedious and far from being perfect. The need for a generic and extensible annotation model therefore arises. In this paper, we present DEVA, an open, generic and expressive multimedia annotation framework. DEVA is an extension of the Dublin Core specification. The model can represent the semantic content of any visual document. It is described in the ontology language DAML+OIL and can easily be extended with external specialized ontologies, adapting the vocabulary to the given application domain. In parallel, we present the Magritte annotation tool, which is an early prototype that validates the DEVA features. Magritte allows to manually annotating image collections. It is designed with a modular and extensible architecture, which enables the user to dynamically adapt the user interface to specialized ontologies merged into DEVA.

Data Center Energy Practitioner (DCEP) Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Traber, Kim; Salim, Munther; Sartor, Dale A.

2016-02-02

The main objective for the DCEP program is to raise the standards of those involved in energy assessments of data centers to accelerate energy savings. The program is driven by the fact that significant knowledge, training, and skills are required to perform accurate energy assessments. The program will raise the confidence level in energy assessments in data centers. For those who pass the exam, the program will recognize them as Data Center Energy Practitioners (DCEPs) by issuing a certificate. Hardware req.: PC, MAC; Software Req.: Windows; Related/Auxiliary software--MS Office; Type of files: executable modules, user guide; Documentation: e-user manual; Documentation:more » http://www.1.eere.energy.gov/industry/datacenters/ 12/10/15-New Documentation URL: https://datacenters.lbl.gov/dcep« less

Human factors aspects of control room design

NASA Technical Reports Server (NTRS)

Jenkins, J. P.

1983-01-01

A plan for the design and analysis of a multistation control room is reviewed. It is found that acceptance of the computer based information system by the uses in the control room is mandatory for mission and system success. Criteria to improve computer/user interface include: match of system input/output with user; reliability, compatibility and maintainability; easy to learn and little training needed; self descriptive system; system under user control; transparent language, format and organization; corresponds to user expectations; adaptable to user experience level; fault tolerant; dialog capability user communications needs reflected in flexibility, complexity, power and information load; integrated system; and documentation.

Understanding Providers' Interaction with Graphical User Interface Pertaining to Clinical Document Usage in an Electronic Health Record System

ERIC Educational Resources Information Center

Rizvi, Rubina Fatima

2017-01-01

Despite high Electronic Health Record (EHR) system adoption rates by hospital and office-based practices, many users remain highly dissatisfied with the current state of EHRs. Sub-optimal EHR usability as a result of insufficient incorporation of User-Centered Design (UCD) approach during System Development Life Cycle process (SDLC) is considered…

High School and Beyond Transcripts Survey (1982). Data File User's Manual. Contractor Report.

ERIC Educational Resources Information Center

Jones, Calvin; And Others

This data file user's manual documents the procedures used to collect and process high school transcripts for a large sample of the younger cohort (1980 sophomores) in the High School and Beyond survey. The manual provides the user with the technical assistance needed to use the computer file and also discusses the following: (1) sample design for…

Computer User's Guide to the Protection of Information Resources. NIST Special Publication 500-171.

ERIC Educational Resources Information Center

Helsing, Cheryl; And Others

Computers have changed the way information resources are handled. Large amounts of information are stored in one central place and can be accessed from remote locations. Users have a personal responsibility for the security of the system and the data stored in it. This document outlines the user's responsibilities and provides security and control…

User Manual for the AZ-101 Data Acquisition System (AS-101 DAS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

BRAYTON, D.D.

2000-02-17

User manual for the TK AZ-101 Waste Retrieval System Data Acquisition System. The purpose of this document is to describe use of the AZ-101 Data Acquisition System (AZ-101 DAS). The AZ-101 DAS is provided to fulfill the requirements for data collection and monitoring as defined in Letters of Instruction (LOI) from Numatec Hanford Corporation (NHC) to Fluor Federal Services (FFS). For a complete description of the system, including design, please refer to the AZ-101 DAS System Description document, RPP-5572.

Computer Program and User Documentation Medical Data Input System

NASA Technical Reports Server (NTRS)

Anderson, J.

1971-01-01

Several levels of documentation are presented for the program module of the NASA medical directorate minicomputer storage and retrieval system. The biomedical information system overview gives reasons for the development of the minicomputer storage and retrieval system. It briefly describes all of the program modules which constitute the system. A technical discussion oriented to the programmer is given. Each subroutine is described in enough detail to permit in-depth understanding of the routines and to facilitate program modifications. The program utilization section may be used as a users guide.

Security for Telecommuting and Broadband Communications: Recommendations of the National Institute of Standards and Technology

NASA Astrophysics Data System (ADS)

Kuhn, D. R.; Tracy, Miles C.; Frankel, Sheila E.

2002-08-01

This document is intended to assist those responsible - users, system administrators, and management - for telecommuting security, by providing introductory information about broadband communication security and policy, security of home office systems, and considerations for system administrators in the central office. It addresses concepts relating to the selection, deployment, and management of broadband communications for a telecommuting user. This document is not intended to provide a mandatory framework for telecommuting or home office broadband communication environments, but rather to present suggested approaches to the topic.

New GES DISC Services Shortening the Path in Science Data Discovery

NASA Technical Reports Server (NTRS)

Li, Angela; Shie, Chung-Lin; Petrenko, Maksym; Hegde, Mahabaleshwa; Teng, William; Liu, Zhong; Bryant, Keith; Shen, Suhung; Hearty, Thomas; Wei, Jennifer;

Mexico: Centro de Documentacion e Informacion Educativa. Seminario de Documentacion e Informacion Pedagogica en America Latina (The Mexican Center for Educational Documentation and Information. Working Paper for the Seminar on Educational Documentation and Information in Latin America).

ERIC Educational Resources Information Center

Secretaria de Educacion Publica, Mexico City (Mexico). Centro de Documentacion e Informacion Educativa.

This document describes the Center for Documentation and Educational Information in Mexico City. Background information on similar services in Mexico is provided and a detailed description of the Center is presented, covering organization, objectives, administration, users, activities, services, and publications. (VM)

U.S. Coast Guard radionavigation system user survey

DOT National Transportation Integrated Search

1990-02-01

This report documents the findings of a national mail survey of civilian marine and terrestrial users of federally-operated Radionavigation Systems (RNS). The main objectives of the survey were to gather empirical data on the use pattern of current R...

UNSODA UNSATURATED SOIL HYDRAULIC DATABASE USER'S MANUAL VERSION 1.0

EPA Science Inventory

This report contains general documentation and serves as a user manual of the UNSODA program. UNSODA is a database of unsaturated soil hydraulic properties (water retention, hydraulic conductivity, and soil water diffusivity), basic soil properties (particle-size distribution, b...

User documentation for the MSK and OMS intelligent tutoring systems

NASA Technical Reports Server (NTRS)

Fink, Pamela K.; Herren, L. Tandy; Lincoln, David T.

1991-01-01

This user's guide describes how to use the Intelligent Tutoring Systems for the Manual Select Keyboard (MSK) and the Orbital Maneuvering System (OMS) and how to use the C code that runs the mockup version of the MSK.

Your TravTek driving experience : rental users study : data summary

DOT National Transportation Integrated Search

1993-11-01

This report documents the questionnaire data collected and the instruments used for the TravTek : Evaluation Task Bl - Rental Users Study. It presents summary statistics for the primary drivers : derived from the renter study, which was conducted fro...

Evaluation of the MAYDAY/9-1-1 field operational test

DOT National Transportation Integrated Search

2001-01-26

The primary purpose of this User Service document is to address the needs of the relevant stakeholders within the maintenance and construction operations community. Based on these needs, the MCO User Service further describes the services it should p...

EMPHASIS™/Nevada UTDEM User Guide Version 2.1.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, C. David; Pasik, Michael F.; Seidel, David B.

The Unstructured Time-Domain ElectroMagnetics (UTDEM) portion of the EMPHASIS suite solves Maxwell’s equations using finite-element techniques on unstructured meshes. This document provides user-specific information to facilitate the use of the code for applications of interest.

Data Link Test and Analysis System/TCAS Monitor User's Guide

DOT National Transportation Integrated Search

1991-02-01

This document is a user's guide for the Data Link Test and Analysis System : (DATAS) Traffic Alert and Collision Avoidance System (TCAS) monitor application. : It provides a brief overall hardware description of DATAS configured as a TCAS : Monitor, ...

ARTVAL user guide : user guide for the ARTerial eVALuation computational engine.

DOT National Transportation Integrated Search

2015-06-01

This document provides guidance on the use of the ARTVAL (Arterial Evaluation) computational : engine. The engine implements the Quick Estimation Method for Urban Streets (QEM-US) : described in Highway Capacity Manual (HCM2010) as the core computati...

Developing the Multimedia User Interface Component (MUSIC) for the Icarus Presentation System (IPS)

DTIC Science & Technology

1993-12-01

AD-A276 341 In-House Report December 1993 DEVELOPING THE MULTIMEDIA USER INTERFACE COMPONENT ( MUSIC ) FOR THE ICARUS PRESENTATION SYSTEM (IPS) Ingrid...DATEs COVERED 7 December 1993 Ina-House Jun - Aug 93 4 TWLE AM SL1sM1E & FUNDING NUMBERS DEVELOPING THE MULTIMEDIA USER INTERFACE COMPONENT ( MUSIC ) PE...the Multimedia User Interface Component ( MUSIC ). This report documents the initial research, design and implementation of a prototype of the MUSIC

An interactive program to display user-generated or file-based maps on a personal computer monitor

USGS Publications Warehouse

Langer, W.H.; Stephens, R.W.

1987-01-01

PC MAP-MAKER is an ADVANCED BASIC program written to provide users of IBM XT, IBM AT, and compatible computers with a straight-forward, flexible method to display geographical data on a color or monochrome PC (personal computer) monitor. Data can be political boundaries such as State and county boundaries; natural curvilinear features such as rivers, drainage areas, and geological contacts; and points such as well locations and mineral localities. Essentially any point defined by a latitude and longitude and any line defined by a series of latitude and longitude values can be displayed using the program. PC MAP MAKER allows users to view tabular data from U.S. Geological Survey files such as WATSTORE (National Water Data Storage and Retrieval System) in a map format in a time much shorter than required by sending the data to a line plotter. The screen image can be saved to disk for recall at a later date, and hard copies can be printed with a dot matrix printer. The program is user-friendly, using menus or prompts to guide user input. It is fully documented and structured to allow the user to tailor the program to the user 's specific needs. The documentation includes a tutorial designed to introduce users to the capabilities of the program using the State of Colorado as a demonstration map area. (Author 's abstract)

Transport Modeling of Hydrogen in Metals for Application to Hydrogen Assisted Cracking of Metals.

DTIC Science & Technology

1995-04-04

34 consists of a Fortran "user element" subroutine for use with the ABAQUS 2 finite element program. Documentation of the 1-D user element subroutine is...trapping theory. The use of the ABAQUS finite element "User Element" subroutines for solving 1-D problems is then outlined in full detail. This is followed...reflect the new ordering given by Eq. (57). ABAOUS User Element Subroutines ABAQUS executes a Fortran subroutine named UEL for each "user defined" finite

7 CFR 400.712 - Research and development reimbursement, maintenance reimbursement, and user fees.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... Documentation of actual costs allowed under this section will be used to determine any reimbursement. (c) To be... requested, and all supporting documentation, must be submitted to FCIC by electronic method or by hard copy... supporting documentation, must be submitted to FCIC by electronic method or by hard copy and received by FCIC...

7 CFR 400.712 - Research and development reimbursement, maintenance reimbursement, and user fees.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Documentation of actual costs allowed under this section will be used to determine any reimbursement. (c) To be... requested, and all supporting documentation, must be submitted to FCIC by electronic method or by hard copy... supporting documentation, must be submitted to FCIC by electronic method or by hard copy and received by FCIC...

7 CFR 400.712 - Research and development reimbursement, maintenance reimbursement, and user fees.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... Documentation of actual costs allowed under this section will be used to determine any reimbursement. (c) To be... requested, and all supporting documentation, must be submitted to FCIC by electronic method or by hard copy... supporting documentation, must be submitted to FCIC by electronic method or by hard copy and received by FCIC...

VET in Schools 2009: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "VET in Schools 2009" report. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the following information provided for each: (1) Definition: a…

Apprentice and Trainee Destinations 2010: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "Apprentice and Trainee Destinations Survey, 2010" report and its associated data tables. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the…

Apprentices and Trainees: Early Trend Estimates, December 2010: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2011

2011-01-01

This document covers the data terms used in the "Australian Vocational Education and Training Statistics: Apprentices and Trainees--Early Trend Estimates December 2010" publication. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report…

Apprentices and Trainees: March Quarter 2010. Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "Apprentices and Trainees: March quarter 2010" publication and its associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within it. Terms that appear in the publication are listed in alphabetical order…

Students and Courses 2009: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "Students and Courses 2009" publication and its associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within it. Terms that appear in the publication are listed in alphabetical order with the following…

VET in Schools 2008: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "VET in Schools 2008" report. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the following information provided for each: (1) Definition: a…

VET in Schools, 2007: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2009

2009-01-01

This document covers the data terms used in the "VET in Schools, 2007" report. The primary purpose of this document is to help users of the report understand the specific data terms used in it. Terms that appear in the report are listed in alphabetical order with the following information provided for each: (1) Definition: a brief…

VET in Schools, 2006: Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2008

2008-01-01

This document covers the data terms used in the "VET in Schools, 2006" report. The primary purpose of this document is to help users understand the specific data terms used in the report. Terms that appear in the report are listed in alphabetical order with the following information provided for each: (1) Definition: a brief explanation…

Apprentices and Trainees: September Quarter 2010. Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2011

2011-01-01

This document covers the data terms used in the "Apprentices and Trainees: September Quarter 2010" publication and its associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within it. Terms that appear in the publication are listed in alphabetical…

Apprentices and Trainees: Annual, 2009. Terms and Definitions. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This document covers the data terms used in the "Apprentices and trainees: Annual 2009" publication and its associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within it. Terms that appear in the publication are listed in alphabetical order with the…

Visual readability analysis: how to make your writings easier to read.

PubMed

Oelke, Daniela; Spretke, David; Stoffel, Andreas; Keim, Daniel A

2012-05-01

We present a tool that is specifically designed to support a writer in revising a draft version of a document. In addition to showing which paragraphs and sentences are difficult to read and understand, we assist the reader in understanding why this is the case. This requires features that are expressive predictors of readability, and are also semantically understandable. In the first part of the paper, we, therefore, discuss a semiautomatic feature selection approach that is used to choose appropriate measures from a collection of 141 candidate readability features. In the second part, we present the visual analysis tool VisRA, which allows the user to analyze the feature values across the text and within single sentences. Users can choose between different visual representations accounting for differences in the size of the documents and the availability of information about the physical and logical layout of the documents. We put special emphasis on providing as much transparency as possible to ensure that the user can purposefully improve the readability of a sentence. Several case studies are presented that show the wide range of applicability of our tool. Furthermore, an in-depth evaluation assesses the quality of the measure and investigates how well users do in revising a text with the help of the tool.

UTOPIAN: user-driven topic modeling based on interactive nonnegative matrix factorization.

PubMed

Choo, Jaegul; Lee, Changhyun; Reddy, Chandan K; Park, Haesun

2013-12-01

Topic modeling has been widely used for analyzing text document collections. Recently, there have been significant advancements in various topic modeling techniques, particularly in the form of probabilistic graphical modeling. State-of-the-art techniques such as Latent Dirichlet Allocation (LDA) have been successfully applied in visual text analytics. However, most of the widely-used methods based on probabilistic modeling have drawbacks in terms of consistency from multiple runs and empirical convergence. Furthermore, due to the complicatedness in the formulation and the algorithm, LDA cannot easily incorporate various types of user feedback. To tackle this problem, we propose a reliable and flexible visual analytics system for topic modeling called UTOPIAN (User-driven Topic modeling based on Interactive Nonnegative Matrix Factorization). Centered around its semi-supervised formulation, UTOPIAN enables users to interact with the topic modeling method and steer the result in a user-driven manner. We demonstrate the capability of UTOPIAN via several usage scenarios with real-world document corpuses such as InfoVis/VAST paper data set and product review data sets.

Document Delivery: Evaluating the Options.

ERIC Educational Resources Information Center

Ward, Suzanne M.

1997-01-01

Discusses options available to libraries for document delivery. Topics include users' needs; cost; copyright compliance; traditional interlibrary loan; types of suppliers; selection criteria, including customer service; new developments in interlibrary loan, including outsourcing arrangements; and the need to evaluate suppliers. (LRW)

Sketchcode: A Documentation Technique for Computer Hobbyists and Programmers

ERIC Educational Resources Information Center

Voros, Todd, L.

1978-01-01

Sketchcode is a metaprograming pseudo-language documentation technique intended to simplify the process of program writing and debugging for both high and low-level users. Helpful hints and examples for the use of the technique are included. (CMV)

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANUP OF AUTOMOTIVE RECYCLING BROWNFIELDS

EPA Science Inventory

The guidance document gives assistance to communities, decision-makers, states and municipalities, academia, and the private sector to address issues related to the redevelopment of Brownfields sites, specifically automotive recycling sites. The document helps users to understand...

Guidance Documents and Sample Forms for Central Data Exchange (CDX) Registration and e-PMN Software (Thin Client)

EPA Pesticide Factsheets

For users submitting electronic notices through CDX, this page contains guidance documents and sample forms to help you, submit Premanufacture Notices (PMN), Bona Fide and biotechnology notices, among others.

PMJ panel discussion overview on mask complexities, cost, and cycle time in 32-nm system LSI generation: conflict or concurrent?

NASA Astrophysics Data System (ADS)

Hosono, Kunihiro; Kato, Kokoro

2008-10-01

This is a report on a panel discussion organized in Photomask Japan 2008, where the challenges about "Mask Complexities, Cost, and Cycle Time in 32-nm System LSI Generation" were addressed to have a look over the possible solutions from the standpoints of chipmaker, commercial mask shop, DA tool vendor and equipments makers. The wrap-up is as follows: Mask complexities justify the mask cost, while the acceptable increase rate of 32nm-mask cost significantly differs between mask suppliers or users side. The efficiency progress by new tools or DFM has driven their cycle-time reductions. Mask complexities and cost will be crucial issues prior to cycle time, and there seems to be linear correlation between them. Controlling complexity and cycle time requires developing a mix of advanced technologies, and especially for cost reduction, shot prices in writers and processing rates in inspection tools have been improved remarkably by tool makers. In addition, activities of consortium in Japan (Mask D2I) are expected to enhance the total optimization of mask design, writing and inspection. The cycle-time reduction potentially drives the lowering of mask cost, and, on the other, the pattern complexities and tighter mask specifications get in the way to 32nm generation as well as the nano-economics and market challenges. There are still many difficult problems in mask manufacturing now, and we are sure to go ahead to overcome a 32nm hurdle with the advances of technologies and collaborations by not only technologies but also finance.

Cielo Computational Environment Usage Model With Mappings to ACE Requirements for the General Availability User Environment Capabilities Release Version 1.1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vigil,Benny Manuel; Ballance, Robert; Haskell, Karen

Cielo is a massively parallel supercomputer funded by the DOE/NNSA Advanced Simulation and Computing (ASC) program, and operated by the Alliance for Computing at Extreme Scale (ACES), a partnership between Los Alamos National Laboratory (LANL) and Sandia National Laboratories (SNL). The primary Cielo compute platform is physically located at Los Alamos National Laboratory. This Cielo Computational Environment Usage Model documents the capabilities and the environment to be provided for the Q1 FY12 Level 2 Cielo Capability Computing (CCC) Platform Production Readiness Milestone. This document describes specific capabilities, tools, and procedures to support both local and remote users. The model ismore » focused on the needs of the ASC user working in the secure computing environments at Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory, or Sandia National Laboratories, but also addresses the needs of users working in the unclassified environment. The Cielo Computational Environment Usage Model maps the provided capabilities to the tri-Lab ASC Computing Environment (ACE) Version 8.0 requirements. The ACE requirements reflect the high performance computing requirements for the Production Readiness Milestone user environment capabilities of the ASC community. A description of ACE requirements met, and those requirements that are not met, are included in each section of this document. The Cielo Computing Environment, along with the ACE mappings, has been issued and reviewed throughout the tri-Lab community.« less

DAKOTA JAGUAR 3.0 user's manual.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, Brian M.; Bauman, Lara E; Chan, Ethan

2013-05-01

JAGUAR (JAva GUi for Applied Research) is a Java software tool providing an advanced text editor and graphical user interface (GUI) to manipulate DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) input specifications. This document focuses on the features necessary to use JAGUAR.

Front-End/Gateway Software: Availability and Usefulness.

ERIC Educational Resources Information Center

Kesselman, Martin

1985-01-01

Reviews features of front-end software packages (interface between user and online system)--database selection, search strategy development, saving and downloading, hardware and software requirements, training and documentation, online systems and database accession, and costs--and discusses gateway services (user searches through intermediary…

National Stormwater Calculator User's Guide – VERSION 1.1

EPA Science Inventory

This document is the user's guide for running EPA's National Stormwater Calculator (http://www.epa.gov/nrmrl/wswrd/wq/models/swc/). The National Stormwater Calculator is a simple to use tool for computing small site hydrology for any location within the US.

Data link test and analysis system/TCAS monitor user's guide

NASA Astrophysics Data System (ADS)

Vandongen, John; Wapelhorst, Leo

1991-02-01

This document is a user's guide for the Data Link Test and Analysis System (DATAS) Traffic Alert and Collision Avoidance System (TCAS) monitor. It provides a brief overall hardware description of DATAS configured as a TCAS monitor, and the applications software.

User Instructions for the Systems Assessment Capability, Rev. 1, Computer Codes Volume 3: Utility Codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eslinger, Paul W.; Aaberg, Rosanne L.; Lopresti, Charles A.

2004-09-14

This document contains detailed user instructions for a suite of utility codes developed for Rev. 1 of the Systems Assessment Capability. The suite of computer codes for Rev. 1 of Systems Assessment Capability performs many functions.

Patriot Script 1.0.13 User Guide for PEM 1.3.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cleland, Timothy James; Kubicek, Deborah Ann; Stroud, Phillip David

2015-11-02

This document provides an updated user guide for Patriot Script Version 1.0.13, for release with PEM 1.3.1 (LAUR-1422817) that adds description and instructions for the new excursion capability (see section 4.5.1).

Screening and Evaluation Tool (SET) Users Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pincock, Layne

This document is the users guide to using the Screening and Evaluation Tool (SET). SET is a tool for comparing multiple fuel cycle options against a common set of criteria and metrics. It does this using standard multi-attribute utility decision analysis methods.

Reporting Codes and Fuel Pathways for the EPA Moderated Transaction System (EMTS)

EPA Pesticide Factsheets

Users should reference this document for a complete list of all reporting codes and all possible fuel pathways for Renewable Fuel Standard (RFS) and Fuels Averaging, Banking and Trading (ABT) users of the EPA Moderated Transaction System (EMTS).

User’s manual for the National Water Information System of the U.S. Geological Survey: Water-Quality System

USGS Publications Warehouse

Dupré, David H.; Scott, Jonathon C.; Clark, Melanie L.; Canova, Michael G.; Stoker, Yvonne E.

2013-01-01

This user documentation is designed to be a reference for the quality of water (QW) programs within the National Water Information System (NWIS). If you are a new user, the “Introduction” and “Getting Started” sections may be the right place for you to start. If you are an experienced user, you may want to go straight to the details provided in the “Program” section (section 3). Code lists and some miscellaneous reference materials are provided in the Appendices. The last section, “Tip Sheets,” is a collection of suggestions for accomplishing selected tasks, some of which are basic and some are advanced. These tip sheets are referenced in the main text of the documentation where appropriate.

Personalization of Rule-based Web Services.

PubMed

Choi, Okkyung; Han, Sang Yong

2008-04-04

Nowadays Web users have clearly expressed their wishes to receive personalized services directly. Personalization is the way to tailor services directly to the immediate requirements of the user. However, the current Web Services System does not provide any features supporting this such as consideration of personalization of services and intelligent matchmaking. In this research a flexible, personalized Rule-based Web Services System to address these problems and to enable efficient search, discovery and construction across general Web documents and Semantic Web documents in a Web Services System is proposed. This system utilizes matchmaking among service requesters', service providers' and users' preferences using a Rule-based Search Method, and subsequently ranks search results. A prototype of efficient Web Services search and construction for the suggested system is developed based on the current work.

Archiving of HEAO-1 data products and the creation of a general user's guide to the archive

NASA Technical Reports Server (NTRS)

Nousek, John A.

1993-01-01

The activities at Penn State University are described. Initiated at Penn State in Jan. 1989, the goal of this program was to preserve the results of the HEAO-1 mission by transforming the obsolete and disorganized data products into modern and documented forms. The result of this effort was an archive of top level data products, totalling 70 Mbytes; a general User's Guide to the archive, which is attached; and a hardcopy archive containing standardized plots and output of fits made to all the pointing data taken by the HEAO-1 A-2 LED experiment. A more detailed description of these activities is found in the following sections. Accompanying this document is a copy of the User's Guide which may provide additional detail.

Format( )MEDIC( )Input

NASA Astrophysics Data System (ADS)

Foster, K.

1994-09-01

This document is a description of a computer program called Format( )MEDIC( )Input. The purpose of this program is to allow the user to quickly reformat wind velocity data in the Model Evaluation Database (MEDb) into a reasonable 'first cut' set of MEDIC input files (MEDIC.nml, StnLoc.Met, and Observ.Met). The user is cautioned that these resulting input files must be reviewed for correctness and completeness. This program will not format MEDb data into a Problem Station Library or Problem Metdata File. A description of how the program reformats the data is provided, along with a description of the required and optional user input and a description of the resulting output files. A description of the MEDb is not provided here but can be found in the RAS Division Model Evaluation Database Description document.

Augmented Citizen Science for Environmental Monitoring and Education

NASA Astrophysics Data System (ADS)

Albers, B.; de Lange, N.; Xu, S.

2017-09-01

Environmental monitoring and ecological studies detect and visualize changes of the environment over time. Some agencies are committed to document the development of conservation and status of geotopes and geosites, which is time-consuming and cost-intensive. Citizen science and crowd sourcing are modern approaches to collect data and at the same time to raise user awareness for environmental changes. Citizen scientists can take photographs of point of interests (POI) with smartphones and the PAN App, which is presented in this article. The user is navigated to a specific point and is then guided with an augmented reality approach to take a photo in a specific direction. The collected photographs are processed to time-lapse videos to visualize environmental changes. Users and experts in environmental agencies can use this data for long-term documentation.

The AE-8 trapped electron model environment

NASA Technical Reports Server (NTRS)

Vette, James I.

1991-01-01

The machine sensible version of the AE-8 electron model environment was completed in December 1983. It has been sent to users on the model environment distribution list and is made available to new users by the National Space Science Data Center (NSSDC). AE-8 is the last in a series of terrestrial trapped radiation models that includes eight proton and eight electron versions. With the exception of AE-8, all these models were documented in formal reports as well as being available in a machine sensible form. The purpose of this report is to complete the documentation, finally, for AE-8 so that users can understand its construction and see the comparison of the model with the new data used, as well as with the AE-4 model.

WikiHyperGlossary (WHG): an information literacy technology for chemistry documents.

PubMed

Bauer, Michael A; Berleant, Daniel; Cornell, Andrew P; Belford, Robert E

2015-01-01

The WikiHyperGlossary is an information literacy technology that was created to enhance reading comprehension of documents by connecting them to socially generated multimedia definitions as well as semantically relevant data. The WikiHyperGlossary enhances reading comprehension by using the lexicon of a discipline to generate dynamic links in a document to external resources that can provide implicit information the document did not explicitly provide. Currently, the most common method to acquire additional information when reading a document is to access a search engine and browse the web. This may lead to skimming of multiple documents with the novice actually never returning to the original document of interest. The WikiHyperGlossary automatically brings information to the user within the current document they are reading, enhancing the potential for deeper document understanding. The WikiHyperGlossary allows users to submit a web URL or text to be processed against a chosen lexicon, returning the document with tagged terms. The selection of a tagged term results in the appearance of the WikiHyperGlossary Portlet containing a definition, and depending on the type of word, tabs to additional information and resources. Current types of content include multimedia enhanced definitions, ChemSpider query results, 3D molecular structures, and 2D editable structures connected to ChemSpider queries. Existing glossaries can be bulk uploaded, locked for editing and associated with multiple social generated definitions. The WikiHyperGlossary leverages both social and semantic web technologies to bring relevant information to a document. This can not only aid reading comprehension, but increases the users' ability to obtain additional information within the document. We have demonstrated a molecular editor enabled knowledge framework that can result in a semantic web inductive reasoning process, and integration of the WikiHyperGlossary into other software technologies, like the Jikitou Biomedical Question and Answer system. Although this work was developed in the chemical sciences and took advantage of open science resources and initiatives, the technology is extensible to other knowledge domains. Through the DeepLit (Deeper Literacy: Connecting Documents to Data and Discourse) startup, we seek to extend WikiHyperGlossary technologies to other knowledge domains, and integrate them into other knowledge acquisition workflows.

Children of female sex workers and drug users: a review of vulnerability, resilience and family-centred models of care.

PubMed

Beard, Jennifer; Biemba, Godfrey; Brooks, Mohamad I; Costello, Jill; Ommerborn, Mark; Bresnahan, Megan; Flynn, David; Simon, Jonathon L

2010-06-23

Injection drug users and female sex workers are two of the populations most at risk for becoming infected with HIV in countries with concentrated epidemics. Many of the adults who fall into these categories are also parents, but little is known about the vulnerabilities faced by their children, their children's sources of resilience, or programmes providing services to these often fragile families. This review synthesizes evidence from disparate sources describing the vulnerabilities and resilience of the children of female sex workers and drug users, and documents some models of care that have been put in place to assist them. A large literature assessing the vulnerability and resilience of children of drug users and alcoholics in developed countries was found. Research on the situation of the children of sex workers is extremely limited. Children of drug users and sex workers can face unique risks, stigma and discrimination, but both child vulnerability and resilience are associated in the drug use literature with the physical and mental health of parents and family context. Family-centred interventions have been implemented in low- and middle-income contexts, but they tend to be small, piecemeal and struggling to meet demand; they are poorly documented, and most have not been formally evaluated. We present preliminary descriptive data from an organization working with pregnant and new mothers who are drug users in Ukraine and from an organization providing services to sex workers and their families in Zambia. Because parents' drug use or sex work is often illegal and hidden, identifying their children can be difficult and may increase children's vulnerability and marginalization. Researchers and service providers, therefore, need to proceed with caution when attempting to reach these populations, but documentation and evaluation of current programmes should be prioritized.

The LHEA PDP 11/70 graphics processing facility users guide

NASA Technical Reports Server (NTRS)

1978-01-01

A compilation of all necessary and useful information needed to allow the inexperienced user to program on the PDP 11/70. Information regarding the use of editing and file manipulation utilities as well as operational procedures are included. The inexperienced user is taken through the process of creating, editing, compiling, task building and debugging his/her FORTRAN program. Also, documentation on additional software is included.

National Household Education Surveys Program of 2012: Data File User's Manual. Parent and Family Involvement in Education Survey. Early Childhood Program Participation Survey. NCES 2015-030

ERIC Educational Resources Information Center

McPhee, C.; Bielick, S.; Masterton, M.; Flores, L.; Parmer, R.; Amchin, S.; Stern, S.; McGowan, H.

2015-01-01

The 2012 National Household Education Surveys Program (NHES:2012) Data File User's Manual provides documentation and guidance for users of the NHES:2012 data files. The manual provides information about the purpose of the study, the sample design, data collection procedures, data processing procedures, response rates, imputation, weighting and…

Editors on Unix

NASA Astrophysics Data System (ADS)

Clayton, C. A.

The purpose of this document is to give new users advice on how to choose which editor to use on Unix machines. Under Unix the default editors are considered to be unfriendly and many users prefer to use other more sophisticated alternatives. However, many such alternatives exist; there is not one single editor that everyone finds acceptable and hence each user must decide for himself or herself which to adopt.

Waste Management Information System (WMIS) User Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. E. Broz

2008-12-22

This document provides the user of the Waste Management Information System (WMIS) instructions on how to use the WMIS software. WMIS allows users to initiate, track, and close waste packages. The modular design supports integration and utilization of data throuh the various stages of waste management. The phases of the waste management work process include generation, designation, packaging, container management, procurement, storage, treatment, transportation, and disposal.

Autocorrelation and Regularization of Query-Based Information Retrieval Scores

DTIC Science & Technology

2008-02-01

of the most general information retrieval models [ Salton , 1968]. By treating a query as a very short document, documents and queries can be rep... Salton , 1971]. In the context of single link hierarchical clustering, Jardine and van Rijsbergen showed that ranking all k clusters and retrieving a...a document about “dogs”, then the system will always miss this document when a user queries “dog”. Salton recognized that a document’s representation

End-User Imaging DISKussions.

ERIC Educational Resources Information Center

McConnell, Pamela Jean

1993-01-01

This third in a series of articles on EDIS (Electronic Document Imaging System) technology focuses on organizational issues. Highlights include computer platforms; management information systems; computer-based skills of staff; new technology and change; time factors; financial considerations; document conversion costs; the benefits of EDIS…

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP BROWNFIELDS SITES: RAILROAD YARDS

EPA Science Inventory

This guidance document gives assistance to communities, decision-makers, states and municipalities, academia, and the private sector to address issues related to the redevelopment of Brownfields sites, specifically railroad yards. The document helps users to understand the proble...

Oil and Gas Supply Module - NEMS Documentation

EIA Publications

2017-01-01

Defines the objectives of the Oil and Gas Supply Model (OGSM), to describe the model's basic approach, and to provide detail on how the model works. This report is intended as a reference document for model analysts, users, and the public.

Managing Underground Storage Tank Data Using dBASE III PLUS.

DTIC Science & Technology

1987-06-01

create a more user friendly environment that will simplify the process of using the UST data. For example, using the Assistant facility a user can delete... for the novice user. Approved for public release; distribution is unlimited. t6 The contents of this report are not to be used for advertising...Al jther ed.lons are Obsolete U11class if iC( %J %. % FOREWORD The programs which this user’s manual documents were developed for the Office of the

AFTER: Batch jobs on the Apollo ring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hofstadler, P.

1987-07-01

This document describes AFTER, a system that allows users of an Apollo ring to submit batch jobs to run without leaving themselves logged in to the ring. Jobs may be submitted to run at a later time or on a different node. Results from the batch job are mailed to the user through some designated mail system. AFTER features an understandable user interface, good on line help, and site customization. This manual serves primarily as a user's guide to AFTER although administration and installation are covered for completeness.

Model Description and Proposed Application for the Enlisted Personnel Inventory, Cost, and Compensation Model

DTIC Science & Technology

1994-07-01

provide additional information for the user / policy analyst: Eichers, D., Sola, M., McLernan, G., EPICC User’s Manual , Systems Research and Applications...maintenance, and a set of on-line help screens. Each are further discussed below and a full discussion is included in the EPICC User’s Manual . Menu Based...written documentation (user’s manual ) that will be provided with the model. 55 The next chapter discusses the validation of the inventory projection and

TKKMOD: A computer simulation program for an integrated wind diesel system. Version 1.0: Document and user guide

NASA Astrophysics Data System (ADS)

Manninen, L. M.

1993-12-01

The document describes TKKMOD, a simulation model developed at Helsinki University of Technology for a specific wind-diesel system layout, with special emphasis on the battery submodel and its use in simulation. The model has been included into the European wind-diesel modeling software package WDLTOOLS under the CEC JOULE project 'Engineering Design Tools for Wind-Diesel Systems' (JOUR-0078). WDLTOOLS serves as the user interface and processes the input and output data of different logistic simulation models developed by the project participants. TKKMOD cannot be run without this shell. The report only describes the simulation principles and model specific parameters of TKKMOD and gives model specific user instructions. The input and output data processing performed outside this model is described in the documentation of the shell. The simulation model is utilized for calculation of long-term performance of the reference system configuration for given wind and load conditions. The main results are energy flows, losses in the system components, diesel fuel consumption, and the number of diesel engine starts.

Seismology software: state of the practice

NASA Astrophysics Data System (ADS)

Smith, W. Spencer; Zeng, Zheng; Carette, Jacques

2018-05-01

We analyzed the state of practice for software development in the seismology domain by comparing 30 software packages on four aspects: product, implementation, design, and process. We found room for improvement in most seismology software packages. The principal areas of concern include a lack of adequate requirements and design specification documents, a lack of test data to assess reliability, a lack of examples to get new users started, and a lack of technological tools to assist with managing the development process. To assist going forward, we provide recommendations for a document-driven development process that includes a problem statement, development plan, requirement specification, verification and validation (V&V) plan, design specification, code, V&V report, and a user manual. We also provide advice on tool use, including issue tracking, version control, code documentation, and testing tools.

Seismology software: state of the practice

NASA Astrophysics Data System (ADS)

Smith, W. Spencer; Zeng, Zheng; Carette, Jacques

2018-02-01

We analyzed the state of practice for software development in the seismology domain by comparing 30 software packages on four aspects: product, implementation, design, and process. We found room for improvement in most seismology software packages. The principal areas of concern include a lack of adequate requirements and design specification documents, a lack of test data to assess reliability, a lack of examples to get new users started, and a lack of technological tools to assist with managing the development process. To assist going forward, we provide recommendations for a document-driven development process that includes a problem statement, development plan, requirement specification, verification and validation (V&V) plan, design specification, code, V&V report, and a user manual. We also provide advice on tool use, including issue tracking, version control, code documentation, and testing tools.

Survey of users of earth resources remote sensing data

NASA Technical Reports Server (NTRS)

Wukelic, G. E.; Stephan, J. G.; Smail, H. E.; Landis, L.; Ebbert, T. F.

1976-01-01

A user survey was conducted to determine current earth resources survey (ERS) data use/user status and recommendations for strengthening use. Only high-altitude aircraft and satellite (primarily LANDSAT) data were included. Emphasis was placed on the private sector/industrial user. Objectives of the survey included: who is using ERS data, how they are using the data, the relative value of current data use as well as obtaining user views as to possible ways of strengthening future ERS data use. The survey results are documented and should provide relevant decision making information for developing future programs of maximum benefit to all end users of satellite ERS data.

The emergence of Zipf's law - Spontaneous encoding optimization by users of a command language

NASA Technical Reports Server (NTRS)

Ellis, S. R.; Hitchcock, R. J.

1986-01-01

The distribution of commands issued by experienced users of a computer operating system allowing command customization tends to conform to Zipf's law. This result documents the emergence of a statistical property of natural language as users master an artificial language. Analysis of Zipf's law by Mandelbrot and Cherry shows that its emergence in the computer interaction of experienced users may be interpreted as evidence that these users optimize their encoding of commands. Accordingly, the extent to which users of a command language exhibit Zipf's law can provide a metric of the naturalness and efficiency with which that language is used.

3DFATMIC: THREE DIMENSIONAL SUBSURFACE FLOW, FATE AND TRANSPORT OF MICROBES AND CHEMICALS MODEL - USER'S MANUAL VERSION 1.0

EPA Science Inventory

This document is the user's manual of 3DFATMIC, a 3-Dimensional Subsurface Flow, Fate and Transport of Microbes and Chemicals Model using a Lagrangian-Eulerian adapted zooming and peak capturing (LEZOOMPC) algorithm.

ESPVI 4.0 ELECTROSTATIS PRECIPITATOR V-1 AND PERFORMANCE MODEL: USER'S MANUAL

EPA Science Inventory

The manual is the companion document for the microcomputer program ESPVI 4.0, Electrostatic Precipitation VI and Performance Model. The program was developed to provide a user- friendly interface to an advanced model of electrostatic precipitation (ESP) performance. The program i...

TRACI: USER'S GUIDE AND SYSTEM DOCUMENTATION

EPA Science Inventory

TRACI allows the examination of the potential for impacts associated with the raw material usage and chemical releases resulting from the processes involved in producing a product. TRACI allows the user to examine the potential for impacts for a single life cycle stage, or the w...

Waterway User Groups Characterized According to the Navigational Requirements of the Vessel Operators

DOT National Transportation Integrated Search

1996-06-01

The primary objective of this project memorandum is to document our hypotheses of how : mariners use aids to navigation, how use varies among the various categories of waterway : users and how use varies with meteorological and other conditions. Anot...