An integrated approach to system design, reliability, and diagnosis

NASA Astrophysics Data System (ADS)

Patterson-Hine, F. A.; Iverson, David L.

1990-12-01

The requirement for ultradependability of computer systems in future avionics and space applications necessitates a top-down, integrated systems engineering approach for design, implementation, testing, and operation. The functional analyses of hardware and software systems must be combined by models that are flexible enough to represent their interactions and behavior. The information contained in these models must be accessible throughout all phases of the system life cycle in order to maintain consistency and accuracy in design and operational decisions. One approach being taken by researchers at Ames Research Center is the creation of an object-oriented environment that integrates information about system components required in the reliability evaluation with behavioral information useful for diagnostic algorithms. Procedures have been developed at Ames that perform reliability evaluations during design and failure diagnoses during system operation. These procedures utilize information from a central source, structured as object-oriented fault trees. Fault trees were selected because they are a flexible model widely used in aerospace applications and because they give a concise, structured representation of system behavior. The utility of this integrated environment for aerospace applications in light of our experiences during its development and use is described. The techniques for reliability evaluation and failure diagnosis are discussed, and current extensions of the environment and areas requiring further development are summarized.

The Impact of Theoretical Orientation and Training on Preference for Diagnostic Models of Personality Pathology.

PubMed

Paggeot, Amy; Nelson, Sharon; Huprich, Steven

2017-01-01

The role of theoretical orientation in determining preference for different methods of diagnosis has been largely unexplored. The goal of the present study was to explore ratings of the usefulness of 4 diagnostic methods after applying them to a patient: prototype ratings derived from the SWAP-II, the DSM-5 Section III specific personality disorders, the DSM-5 Section III trait model, and prototype ratings derived from the Psychodynamic Diagnostic Manual (PDM). Three hundred and twenty-nine trainees in APA-accredited doctoral programs and internships rated one of their current patients with each of the 4 diagnostic methods. Individuals who classified their theoretical orientation as "cognitive- behavioral" displayed a significantly greater preference for the proposed DSM-5 personality disorder prototypes when compared to individuals who classified their orientation as "psychodynamic/psychoanalytic," while individuals who considered themselves psychodynamic or psychoanalytic rated the PDM as significantly more useful than those who considered themselves cognitive-behavioral. Individuals who classified their graduate program as a PsyD program were also more likely to rate the DSM-5 Section III and PDM models as more useful diagnostic methods than individuals who classified their graduate program as a PhD program. Implications and future directions will be discussed. © 2017 S. Karger AG, Basel.

Gender Identity, Sexual Orientation, and Eating-related Pathology in a National Sample of College Students

PubMed Central

Diemer, Elizabeth W.; Grant, Julia D.; Munn-Chernoff, Melissa A.; Patterson, David A.; Duncan, Alexis E.

2015-01-01

Purpose This study examined associations of gender identity and sexual orientation with self-reported eating disorder (SR-ED) diagnosis and compensatory behaviors (CB) in trans- and cis-gender college students. Methods Data came from 289,024 students from 223 U.S. universities participating in The American College Health Association – National College Health Assessment II (median age 20 years). Rates of self-reported past year SR-ED diagnosis and past month use of diet pills and vomiting or laxatives were compared among transgender students (n=479) and cisgender sexual minority male (n=5,977) and female (n=9,445), unsure male (n=1,662) and female (n=3,395), and heterosexual male (n=91,599) and female (n=176,467) students using chi-squared tests. Logistic regression models were used to estimate the odds of eating-related pathology outcomes after adjusting for covariates. Results Rates of past year SR-ED diagnosis and past month use of diet pills and vomiting or laxatives were highest among transgender students and lowest cisgender heterosexual men. Compared to cisgender heterosexual women, transgender students had greater odds of past year SR-ED diagnosis (OR: 4.62, 95% CI: 3.41-6.26) and past month use of diet pills (OR: 2.05, 95% CI: 1.48-2.83) and vomiting or laxatives (OR: 2.46, 95% CI: 1.83-3.30). Although cisgender sexual minority men and unsure men and women also had elevated rates of SR-ED diagnosis than heterosexual women, the magnitudes of these associations were lower than for transgender individuals (ORs: 1.40-1.54). Conclusions Transgender and cisgender sexual minority young adults have elevated rates of CB and SR-ED diagnosis. Appropriate interventions for these populations are urgently needed. PMID:25937471

Extracting cardiac myofiber orientations from high frequency ultrasound images

NASA Astrophysics Data System (ADS)

Qin, Xulei; Cong, Zhibin; Jiang, Rong; Shen, Ming; Wagner, Mary B.; Kirshbom, Paul; Fei, Baowei

2013-03-01

Cardiac myofiber plays an important role in stress mechanism during heart beating periods. The orientation of myofibers decides the effects of the stress distribution and the whole heart deformation. It is important to image and quantitatively extract these orientations for understanding the cardiac physiological and pathological mechanism and for diagnosis of chronic diseases. Ultrasound has been wildly used in cardiac diagnosis because of its ability of performing dynamic and noninvasive imaging and because of its low cost. An extraction method is proposed to automatically detect the cardiac myofiber orientations from high frequency ultrasound images. First, heart walls containing myofibers are imaged by B-mode high frequency (<20 MHz) ultrasound imaging. Second, myofiber orientations are extracted from ultrasound images using the proposed method that combines a nonlinear anisotropic diffusion filter, Canny edge detector, Hough transform, and K-means clustering. This method is validated by the results of ultrasound data from phantoms and pig hearts.

Peer influence as a potential magnifier of ADHD diagnosis.

PubMed

Aronson, Brian

2016-11-01

The prevalence of Attention Deficit and Hyperactivity Disorder (ADHD) is growing in America, but its cause is unclear. Scholars have identified many environmental factors that can cause or confound ADHD diagnosis, but epidemiological studies that try to control for confounding factors still find evidence that rates of ADHD diagnosis are increasing. As a preliminary explanation to ADHD's increasing prevalence, this article examines whether core ADHD diagnostic traits are subject to peer influence. If ADHD diagnosis can be confounded by peer influence, there are several mechanisms that could have caused increased rates of diagnosis. With data drawn from two schools across three waves in the National Longitudinal Survey of Adolescent Health (n = 2193), the author uses a stochastic actor oriented model to estimate the effect of peer influence on inattention, controlling for alternative network and behavioral causes. Results indicate that respondents have a strong likelihood to modify their self-reports of inattention, a core ADHD trait, to resemble that of their friends. Copyright © 2016 Elsevier Ltd. All rights reserved.

Domains of distress among people with sexual orientation obsessions.

PubMed

Williams, Monnica T; Wetterneck, Chad; Tellawi, Ghazel; Duque, Gerardo

2015-04-01

Although sexual obsessions in obsessive-compulsive disorder (OCD) are not uncommon, obsessions about sexual orientation have not been well studied. These obsessions focus on issues such as the fear of being or becoming gay, fear of being perceived by others as gay, and unwanted mental images involving homosexual acts. Sexual orientation obsessions in OCD are particularly distressing due to the ego-dystonic nature of the obsessions and, often, stigma surrounding a same-sex orientation. The purpose of this study was to better understand distress in people suffering from sexual orientation obsessions in OCD. Data were collected online (n = 1,176) and subjects were 74.6% male, 72.0% heterosexual, and 26.4% with an OCD diagnosis from a professional. The survey consisted of 70 novel questions that were assessed using a principal components analysis and the items separated into six components. These components were then correlated to distress among those with a prior OCD diagnosis and sexual orientation obsessions. Results indicated that sexual orientation obsessions in OCD were related to severe distress, including suicidal ideation. Implications of these findings and future directions for research are discussed.

A Computationally-Efficient Inverse Approach to Probabilistic Strain-Based Damage Diagnosis

NASA Technical Reports Server (NTRS)

Warner, James E.; Hochhalter, Jacob D.; Leser, William P.; Leser, Patrick E.; Newman, John A

2016-01-01

This work presents a computationally-efficient inverse approach to probabilistic damage diagnosis. Given strain data at a limited number of measurement locations, Bayesian inference and Markov Chain Monte Carlo (MCMC) sampling are used to estimate probability distributions of the unknown location, size, and orientation of damage. Substantial computational speedup is obtained by replacing a three-dimensional finite element (FE) model with an efficient surrogate model. The approach is experimentally validated on cracked test specimens where full field strains are determined using digital image correlation (DIC). Access to full field DIC data allows for testing of different hypothetical sensor arrangements, facilitating the study of strain-based diagnosis effectiveness as the distance between damage and measurement locations increases. The ability of the framework to effectively perform both probabilistic damage localization and characterization in cracked plates is demonstrated and the impact of measurement location on uncertainty in the predictions is shown. Furthermore, the analysis time to produce these predictions is orders of magnitude less than a baseline Bayesian approach with the FE method by utilizing surrogate modeling and effective numerical sampling approaches.

The fiber orientation in the coronary arterial wall at physiological loading evaluated with a two-fiber constitutive model.

PubMed

van der Horst, Arjen; van den Broek, Chantal N; van de Vosse, Frans N; Rutten, Marcel C M

2012-03-01

A patient-specific mechanical description of the coronary arterial wall is indispensable for individualized diagnosis and treatment of coronary artery disease. A way to determine the artery's mechanical properties is to fit the parameters of a constitutive model to patient-specific experimental data. Clinical data, however, essentially lack information about the stress-free geometry of an artery, which is necessary for constitutive modeling. In previous research, it has been shown that a way to circumvent this problem is to impose extra modeling constraints on the parameter estimation procedure. In this study, we propose a new modeling constraint concerning the in-situ fiber orientation (β (phys)). β (phys), which is a major contributor to the arterial stress-strain behavior, was determined for porcine and human coronary arteries using a mixed numerical-experimental method. The in-situ situation was mimicked using in-vitro experiments at a physiological axial pre-stretch, in which pressure-radius and pressure-axial force were measured. A single-layered, hyperelastic, thick-walled, two-fiber material model was accurately fitted to the experimental data, enabling the computation of stress, strain, and fiber orientation. β (phys) was found to be almost equal for all vessels measured (36.4 ± 0.3)°, which theoretically can be explained using netting analysis. In further research, this finding can be used as an extra modeling constraint in parameter estimation from clinical data.

A service oriented approach for guidelines-based clinical decision support using BPMN.

PubMed

Rodriguez-Loya, Salvador; Aziz, Ayesha; Chatwin, Chris

2014-01-01

Evidence-based medical practice requires that clinical guidelines need to be documented in such a way that they represent a clinical workflow in its most accessible form. In order to optimize clinical processes to improve clinical outcomes, we propose a Service Oriented Architecture (SOA) based approach for implementing clinical guidelines that can be accessed from an Electronic Health Record (EHR) application with a Web Services enabled communication mechanism with the Enterprise Service Bus. We have used Business Process Modelling Notation (BPMN) for modelling and presenting the clinical pathway in the form of a workflow. The aim of this study is to produce spontaneous alerts in the healthcare workflow in the diagnosis of Chronic Obstructive Pulmonary Disease (COPD). The use of BPMN as a tool to automate clinical guidelines has not been previously employed for providing Clinical Decision Support (CDS).

Support vector machine in machine condition monitoring and fault diagnosis

NASA Astrophysics Data System (ADS)

Widodo, Achmad; Yang, Bo-Suk

2007-08-01

Recently, the issue of machine condition monitoring and fault diagnosis as a part of maintenance system became global due to the potential advantages to be gained from reduced maintenance costs, improved productivity and increased machine availability. This paper presents a survey of machine condition monitoring and fault diagnosis using support vector machine (SVM). It attempts to summarize and review the recent research and developments of SVM in machine condition monitoring and diagnosis. Numerous methods have been developed based on intelligent systems such as artificial neural network, fuzzy expert system, condition-based reasoning, random forest, etc. However, the use of SVM for machine condition monitoring and fault diagnosis is still rare. SVM has excellent performance in generalization so it can produce high accuracy in classification for machine condition monitoring and diagnosis. Until 2006, the use of SVM in machine condition monitoring and fault diagnosis is tending to develop towards expertise orientation and problem-oriented domain. Finally, the ability to continually change and obtain a novel idea for machine condition monitoring and fault diagnosis using SVM will be future works.

[Subtainable health promotion via organisational development--a model project for teachers in professional training schools].

PubMed

Schumacher, L; Nieskens, B; Bräuer, H; Sieland, B

2005-02-01

The goal of this project is the development, implementation and evaluation of a concept designed for sustainable health promotion among occupational and trade school teachers. We assume that for sustainable health promotion -- along with a behavioral prevention program -- a change is necessary in the structure, as well as, the working and communication processes within schools. The realization of early teacher participation and self regulated cooperative groups initiates comprehensive and goal-oriented developmental processes in the project schools. The organizational development process was accomplished in the following way: At the beginning we conducted a diagnosis of school-specific and individual health risks and the resources available to the project schools. The results were reported for both the individual and for the teacher group. This was intended to clarify the potential for improvement and, thus, strengthen the teachers' motivation toward processes of change. Following the diagnosis, the teachers chose areas of stress-related strain and then worked in groups to develop and implement behaviour and working condition-oriented intervention strategies for health promotion. The diagnosis results confirm the necessity of school-specific health promotion: the schools demonstrate very different demand and resource profiles. Furthermore, is has become evident that the central success factor for health promotion in schools is the teachers' willingness for change. The individual and group reports of the diagnosis results seem to have made clear how essential individual and organisational changes are.

Polarization-resolved second-harmonic generation imaging for liver fibrosis assessment without labeling

NASA Astrophysics Data System (ADS)

Lin, Jian; Pan, Shiying; Zheng, Wei; Huang, Zhiwei

2013-10-01

We apply the polarization-resolved second-harmonic generation (PR-SHG) microscopy to investigate the changes of collagen typings (type I vs type III) and collagen fibril orientations of liver tissue in bile-duct-ligation (BDL) rat models. The PR-SHG results show that the second-order susceptibility tensor ratios (χ31/χ15 and χ33/χ15) of collagen fibers increase with liver fibrotic progression after BDL surgery, reflecting an increase of the type III collagen component with the severity of liver fibrosis; and the square root of the collagen type III to type I ratio linearly correlates (R2 = 0.98) with histopathological scores. Furthermore, the collagen fibril orientations become more random with liver fibrosis transformation as compared to normal liver tissue. This work demonstrates that PR-SHG microscopy has the potential for label-free diagnosis and characterization of liver fibrosis based on quantitative analysis of collagen typings and fibril orientations.

Disclosure of HIV-positive status to Latino gay men's social networks.

PubMed

Zea, María Cecilia; Reisen, Carol A; Poppen, Paul J; Echeverry, John J; Bianchi, Fernanda T

2004-03-01

This study explored disclosure of serostatus in a sample of 155 HIV-positive Latino gay men from New York City and Washington, DC. We examined rates of disclosure to different members of the social network: mothers, fathers, close friends, and primary sexual partners. There were high rates of disclosure of HIV-positive serostatus to main partners and closest friends and lower rates to fathers and mothers. We examined the role of 3 contextual target-dependent factors (emotional closeness to target, anticipated reactions from target, and target's knowledge of sexual orientation), as well as acculturation and time since diagnosis. Three separate logistic regression models were performed to predict disclosure of HIV-positive status to 3 targets: mothers, fathers, and closest friends. We found that disclosure was not a generalized tendency, but rather different factors were influential depending on the target. Whether the target was aware of participant's sexual orientation was associated with disclosure in all 3 models. Greater emotional closeness also predicted disclosure to mother and father; greater U.S. acculturation was associated with disclosure to father and marginally to mother. A longer time since diagnosis was associated with disclosure to the closest friend. These findings highlight the importance of taking into account roles and relationships, and their effect on disclosure.

Audit method suited for DSS in clinical environment.

PubMed

Vicente, Javier

2015-01-01

This chapter presents a novel online method to audit predictive models using a Bayesian perspective. The auditing model has been specifically designed for Decision Support Systems (DSSs) suited for clinical or research environments. Taking as starting point the working diagnosis supplied by the clinician, this method compares and evaluates the predictive skills of those models able to answer to that diagnosis. The approach consists in calculating the posterior odds of a model through the composition of a prior odds, a static odds, and a dynamic odds. To do so, this method estimates the posterior odds from the cases that the comparing models had in common during the design stage and from the cases already viewed by the DSS after deployment in the clinical site. In addition, if an ontology of the classes is available, this method can audit models answering related questions, which offers a reinforcement to the decisions the user already took and gives orientation on further diagnostic steps.The main technical novelty of this approach lies in the design of an audit model adapted to suit the decision workflow of a clinical environment. The audit model allows deciding what is the classifier that best suits each particular case under evaluation and allows the detection of possible misbehaviours due to population differences or data shifts in the clinical site. We show the efficacy of our method for the problem of brain tumor diagnosis with Magnetic Resonance Spectroscopy (MRS).

Utilizing DMAIC six sigma and evidence-based medicine to streamline diagnosis in chest pain.

PubMed

Kumar, Sameer; Thomas, Kory M

2010-01-01

The purpose of this study was to quantify the difference between the current process flow model for a typical patient workup for chest pain and development of a new process flow model that incorporates DMAIC (define, measure, analyze, improve, control) Six Sigma and evidence-based medicine in a best practices model for diagnosis and treatment. The first stage, DMAIC Six Sigma, is used to highlight areas of variability and unnecessary tests in the current process flow for a patient presenting to the emergency department or physician's clinic with chest pain (also known as angina). The next stage, patient process flow, utilizes DMAIC results in the development of a simulated model that represents real-world variability in the diagnosis and treatment of a patient presenting with angina. The third and final stage is used to analyze the evidence-based output and quantify the factors that drive physician diagnosis accuracy and treatment, as well as review the potential for a broad national evidence-based database. Because of the collective expertise captured within the computer-oriented evidence-based model, the study has introduced an innovative approach to health care delivery by bringing expert-level care to any physician triaging a patient for chest pain anywhere in the world. Similar models can be created for other ailments as well, such as headache, gastrointestinal upset, and back pain. This updated way of looking at diagnosing patients stemming from an evidence-based best practice decision support model may improve workflow processes and cost savings across the health care continuum.

Model-Based Fault Diagnosis: Performing Root Cause and Impact Analyses in Real Time

NASA Technical Reports Server (NTRS)

Figueroa, Jorge F.; Walker, Mark G.; Kapadia, Ravi; Morris, Jonathan

2012-01-01

Generic, object-oriented fault models, built according to causal-directed graph theory, have been integrated into an overall software architecture dedicated to monitoring and predicting the health of mission- critical systems. Processing over the generic fault models is triggered by event detection logic that is defined according to the specific functional requirements of the system and its components. Once triggered, the fault models provide an automated way for performing both upstream root cause analysis (RCA), and for predicting downstream effects or impact analysis. The methodology has been applied to integrated system health management (ISHM) implementations at NASA SSC's Rocket Engine Test Stands (RETS).

Development of an integrated Sasang constitution diagnosis method using face, body shape, voice, and questionnaire information

PubMed Central

2012-01-01

Background Sasang constitutional medicine (SCM) is a unique form of traditional Korean medicine that divides human beings into four constitutional types (Tae-Yang: TY, Tae-Eum: TE, So-Yang: SY, and So-Eum: SE), which differ in inherited characteristics, such as external appearance, personality traits, susceptibility to particular diseases, drug responses, and equilibrium among internal organ functions. According to SCM, herbs that belong to a certain constitution cannot be used in patients with other constitutions; otherwise, this practice may result in no effect or in an adverse effect. Thus, the diagnosis of SC type is the most crucial step in SCM practice. The diagnosis, however, tends to be subjective due to a lack of quantitative standards for SC diagnosis. Methods We have attempted to make the diagnosis method as objective as possible by basing it on an analysis of quantitative data from various Oriental medical clinics. Four individual diagnostic models were developed with multinomial logistic regression based on face, body shape, voice, and questionnaire responses. Inspired by SCM practitioners’ holistic diagnostic processes, an integrated diagnostic model was then proposed by combining the four individual models. Results The diagnostic accuracies in the test set, after the four individual models had been integrated into a single model, improved to 64.0% and 55.2% in the male and female patient groups, respectively. Using a cut-off value for the integrated SC score, such as 1.6, the accuracies increased by 14.7% in male patients and by 4.6% in female patients, which showed that a higher integrated SC score corresponded to a higher diagnostic accuracy. Conclusions This study represents the first trial of integrating the objectification of SC diagnosis based on quantitative data and SCM practitioners’ holistic diagnostic processes. Although the diagnostic accuracy was not great, it is noted that the proposed diagnostic model represents common rules among practitioners who have various points of view. Our results are expected to contribute as a desirable research guide for objective diagnosis in traditional medicine, as well as to contribute to the precise diagnosis of SC types in an objective manner in clinical practice. PMID:22762505

Development of an integrated Sasang constitution diagnosis method using face, body shape, voice, and questionnaire information.

PubMed

Do, Jun-Hyeong; Jang, Eunsu; Ku, Boncho; Jang, Jun-Su; Kim, Honggie; Kim, Jong Yeol

2012-07-04

Sasang constitutional medicine (SCM) is a unique form of traditional Korean medicine that divides human beings into four constitutional types (Tae-Yang: TY, Tae-Eum: TE, So-Yang: SY, and So-Eum: SE), which differ in inherited characteristics, such as external appearance, personality traits, susceptibility to particular diseases, drug responses, and equilibrium among internal organ functions. According to SCM, herbs that belong to a certain constitution cannot be used in patients with other constitutions; otherwise, this practice may result in no effect or in an adverse effect. Thus, the diagnosis of SC type is the most crucial step in SCM practice. The diagnosis, however, tends to be subjective due to a lack of quantitative standards for SC diagnosis. We have attempted to make the diagnosis method as objective as possible by basing it on an analysis of quantitative data from various Oriental medical clinics. Four individual diagnostic models were developed with multinomial logistic regression based on face, body shape, voice, and questionnaire responses. Inspired by SCM practitioners' holistic diagnostic processes, an integrated diagnostic model was then proposed by combining the four individual models. The diagnostic accuracies in the test set, after the four individual models had been integrated into a single model, improved to 64.0% and 55.2% in the male and female patient groups, respectively. Using a cut-off value for the integrated SC score, such as 1.6, the accuracies increased by 14.7% in male patients and by 4.6% in female patients, which showed that a higher integrated SC score corresponded to a higher diagnostic accuracy. This study represents the first trial of integrating the objectification of SC diagnosis based on quantitative data and SCM practitioners' holistic diagnostic processes. Although the diagnostic accuracy was not great, it is noted that the proposed diagnostic model represents common rules among practitioners who have various points of view. Our results are expected to contribute as a desirable research guide for objective diagnosis in traditional medicine, as well as to contribute to the precise diagnosis of SC types in an objective manner in clinical practice.

Detection, modeling and matching of pleural thickenings from CT data towards an early diagnosis of malignant pleural mesothelioma

NASA Astrophysics Data System (ADS)

Chaisaowong, Kraisorn; Kraus, Thomas

2014-03-01

Pleural thickenings can be caused by asbestos exposure and may evolve into malignant pleural mesothelioma. While an early diagnosis plays the key role to an early treatment, and therefore helping to reduce morbidity, the growth rate of a pleural thickening can be in turn essential evidence to an early diagnosis of the pleural mesothelioma. The detection of pleural thickenings is today done by a visual inspection of CT data, which is time-consuming and underlies the physician's subjective judgment. Computer-assisted diagnosis systems to automatically assess pleural mesothelioma have been reported worldwide. But in this paper, an image analysis pipeline to automatically detect pleural thickenings and measure their volume is described. We first delineate automatically the pleural contour in the CT images. An adaptive surface-base smoothing technique is then applied to the pleural contours to identify all potential thickenings. A following tissue-specific topology-oriented detection based on a probabilistic Hounsfield Unit model of pleural plaques specify then the genuine pleural thickenings among them. The assessment of the detected pleural thickenings is based on the volumetry of the 3D model, created by mesh construction algorithm followed by Laplace-Beltrami eigenfunction expansion surface smoothing technique. Finally, the spatiotemporal matching of pleural thickenings from consecutive CT data is carried out based on the semi-automatic lung registration towards the assessment of its growth rate. With these methods, a new computer-assisted diagnosis system is presented in order to assure a precise and reproducible assessment of pleural thickenings towards the diagnosis of the pleural mesothelioma in its early stage.

The nursing process in crisis-oriented psychiatric home care.

PubMed

Boomsma, J; Dingemans, C A; Dassen, T W

1997-08-01

Crisis-oriented psychiatric home care is a recent development in the Dutch mental health care system. Because of the difference between psychiatric care in the home and in the hospital, an action research project was initiated. This project was directed at the nursing process and the nurses' role and skills in psychiatric home care. The main goal of the project was to describe and to standardize nursing diagnoses and interventions used in crisis-oriented and long-term psychiatric home care. The development of supporting methods of assessment and intervention were also important aspects of this project. In this article a crisis-oriented psychiatric home care programme and the first developmental research activities within this programme are described. To support the nursing process, the development of a nursing record and an assessment-format, based on Gordon's Functional Health Patterns (FHP), took place. By means of content analysis of 61 nursing records, the most frequently stated nursing diagnoses, based upon the North American Nursing Diagnosis Association (NANDA) taxonomy, were identified. The psychiatric diagnostic categories of the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV) were also collected. The most common categories found were those of mood disorders and schizophrenia or psychotic disorders. Seventy-five per cent of the nursing diagnoses showed up within four FHP: role-relationship, coping-stress tolerance, self-perception/self-concept and activity-exercise. The nursing diagnosis of 'ineffective individual coping' was stated most frequently. This is not surprising because of the similarities in the definitions of this nursing diagnosis and the concept of 'crisis' to which the psychiatric home care programme is oriented. Further research activities will be focused on standardization of nursing diagnosis and the interventions that nurses undertake in this type of care.

Analysis of Italian regulations on pathways of care for patients in a vegetative or minimally conscious state

PubMed Central

Sattin, Davide; De Torres, Laura; Dolce, Giuliano; Arcuri, Francesco; Estraneo, Anna; Cardinale, Viviana; Piperno, Roberto; Zavatta, Elena; Formisano, Rita; D’Ippolito, Mariagrazia; Vassallo, Claudio; Dessi, Barbara; Lamberti, Gianfranco; Antoniono, Elena; Lanzillotti, Crocifissa; Navarro, Jorge; Bramanti, Placido; Marino, Silvia; Zampolini, Mauro; Scarponi, Federico; Avesani, Renato; Salvi, Luca; Ferro, Salvatore; Mazza, Luigi; Fogar, Paolo; Feller, Sandro; De Nigris, Fulvio; Martinuzzi, Andrea; Buffoni, Mara; Pessina, Adriano; Corsico, Paolo; Leonardi, Matilde

2017-01-01

Summary Different rehabilitation models for persons diagnosed with disorders of consciousness have been proposed in Europe during the last decade. In Italy, the Ministry of Health has defined a national healthcare model, although, to date, there is a lack of information on how this has been implemented at regional level. The INCARICO project collected information on different regional regulations, analysing ethical aspects and mapping care facilities (numbers of beds and medical units) in eleven regional territories. The researchers found a total of 106 laws; differences emerged both between regions and versus the national model, showing that patients with the same diagnosis may follow different pathways of care. An ongoing cultural shift from a treatment-oriented medical approach towards a care-oriented integrated biopsychosocial approach was found in all the welfare and healthcare systems analysed. Future studies are needed to explore the relationship between healthcare systems and the quality of services provided. PMID:29042005

[Current informational technologies in the structure of medical and psychological tasks of school education].

PubMed

Sukhareva, L M; Pavlovich, K E; Druzhinin, P V; Sakharova, V G; Kvasov, G I

2000-01-01

Prospects for equipment of present-day school with computing machinery allow fresh approaches to be applied to the improvement of means for diagnosis and health prophylaxis in children and to professional orientation. Automatic systems have been developed for diagnosing diseases and monitoring the sociomental health of children and the adaptation of junior and middle schoolchildren to school activities. The systems provide a real way of successfully following the development of major mental functions for prenosological diagnosis of detected abnormalities and their subsequent correction. An automatic system for professional orientation of middle- and senior-form pupils has been devised on the basis of mental diagnostic testing of the schoolchildren's professional orientation, interests, inclinations, psychophysiological and personality traits.

NARDAC Civilian DP Training: A Need for Management Attention.

DTIC Science & Technology

1982-12-01

POSITION DESCRIPTIONS ------------------------ 28 D. TRAINING ------------------------------------- 31 IV. NARDAC ORGANIZATIONAL DIAGNOSIS ------------------ 32...the production schedule. 31 IV. NARDAC ORGANIZATIONAL DIAGNOSIS The upper level manager of a highly sophisticated, production oriented ADP facility...14 September 1982. 22. Preziosi, R.C., " Organizational Diagnosis Questicnnaire", The 1990 Annual Handbook for Group Facilitators, p. 112, University

Gender Identity, Sexual Orientation, and Eating-Related Pathology in a National Sample of College Students.

PubMed

Diemer, Elizabeth W; Grant, Julia D; Munn-Chernoff, Melissa A; Patterson, David A; Duncan, Alexis E

2015-08-01

This study examined associations of gender identity and sexual orientation with self-reported eating disorder (SR-ED) diagnosis and compensatory behaviors in transgender and cisgender college students. Data came from 289,024 students from 223 U.S. universities participating in the American College Health Association-National College Health Assessment II (median age, 20 years). Rates of past-year SR-ED diagnosis and past-month use of diet pills and vomiting or laxatives were compared among transgender students (n = 479) and cisgender sexual minority (SM) male (n = 5,977) and female (n = 9,445), unsure male (n = 1,662) and female (n = 3,395), and heterosexual male (n = 91,599) and female (n = 176,467) students using chi-square tests. Logistic regression models were used to estimate the odds of eating-related pathology outcomes after adjusting for covariates. Rates of past-year SR-ED diagnosis and past-month use of diet pills and vomiting or laxatives were highest among transgender students and lowest among cisgender heterosexual men. Compared to cisgender heterosexual women, transgender students had greater odds of past-year SR-ED diagnosis (odds ratio [OR], 4.62; 95% confidence interval [CI], 3.41-6.26) and past-month use of diet pills (OR, 2.05; 95% CI, 1.48-2.83) and vomiting or laxatives (OR, 2.46; 95% CI, 1.83-3.30). Although cisgender SM men and unsure men and women also had elevated rates of SR-ED diagnosis than heterosexual women, the magnitudes of these associations were lower than those for transgender individuals (ORs; 1.40-1.54). Transgender and cisgender SM young adults have elevated rates of compensatory behavior and SR-ED diagnosis. Appropriate interventions for these populations are urgently needed. Copyright © 2015 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Combined expert system/neural networks method for process fault diagnosis

DOEpatents

Reifman, Jaques; Wei, Thomas Y. C.

1995-01-01

A two-level hierarchical approach for process fault diagnosis is an operating system employs a function-oriented approach at a first level and a component characteristic-oriented approach at a second level, where the decision-making procedure is structured in order of decreasing intelligence with increasing precision. At the first level, the diagnostic method is general and has knowledge of the overall process including a wide variety of plant transients and the functional behavior of the process components. An expert system classifies malfunctions by function to narrow the diagnostic focus to a particular set of possible faulty components that could be responsible for the detected functional misbehavior of the operating system. At the second level, the diagnostic method limits its scope to component malfunctions, using more detailed knowledge of component characteristics. Trained artificial neural networks are used to further narrow the diagnosis and to uniquely identify the faulty component by classifying the abnormal condition data as a failure of one of the hypothesized components through component characteristics. Once an anomaly is detected, the hierarchical structure is used to successively narrow the diagnostic focus from a function misbehavior, i.e., a function oriented approach, until the fault can be determined, i.e., a component characteristic-oriented approach.

Combined expert system/neural networks method for process fault diagnosis

DOEpatents

Reifman, J.; Wei, T.Y.C.

1995-08-15

A two-level hierarchical approach for process fault diagnosis of an operating system employs a function-oriented approach at a first level and a component characteristic-oriented approach at a second level, where the decision-making procedure is structured in order of decreasing intelligence with increasing precision. At the first level, the diagnostic method is general and has knowledge of the overall process including a wide variety of plant transients and the functional behavior of the process components. An expert system classifies malfunctions by function to narrow the diagnostic focus to a particular set of possible faulty components that could be responsible for the detected functional misbehavior of the operating system. At the second level, the diagnostic method limits its scope to component malfunctions, using more detailed knowledge of component characteristics. Trained artificial neural networks are used to further narrow the diagnosis and to uniquely identify the faulty component by classifying the abnormal condition data as a failure of one of the hypothesized components through component characteristics. Once an anomaly is detected, the hierarchical structure is used to successively narrow the diagnostic focus from a function misbehavior, i.e., a function oriented approach, until the fault can be determined, i.e., a component characteristic-oriented approach. 9 figs.

Application of the human needs conceptual model to dental hygiene practice.

PubMed

Darby, M L; Walsh, M M

2000-01-01

The Human Needs Conceptual Model is relevant to dental hygiene because of the need for dental hygienists to be client focused, humanistic, and accountable in practice. Application of the Human Needs Conceptual Model provides a formal framework for identifying and understanding the unique needs of the client that can be met through dental hygiene care. Practitioners find that the Human Needs Conceptual Model can not only help them in assessment and diagnosis, but also in client education, decision-making, care implementation, and the evaluation of treatment outcomes. By using the model, the dental hygienist is able to manage client care humanistically and holistically, and ensure that care is client-centered rather than task-oriented. With the model, a professional practice can be made operational.

[Emotional burnout syndrome and pedagogical styles in teachers of a medical high school].

PubMed

Ivanova, E I; Ivanov, I V; Serdakova, K G

2011-01-01

The study involved 20 teachers of medical institutions who gave consent to be examined for emotional burnout syndrome (EBS). Diagnosis of moderate EBS was confirmed by relevant clinical tests and analysis of pedagogical communication style in 30% of the participants. The pedagogical style of teachers exhibiting no signs of burnout is characterized by personality-oriented model of communication with differential attitudes toward students and active interaction with them. Teachers presenting with EBS relied on the disciplinary model of communication prevailed by authoritarian and dictatorial behaviour lacking communicability and flexibility; these persons showed pronounced hyperreflexia.

A hierarchical distributed control model for coordinating intelligent systems

NASA Technical Reports Server (NTRS)

Adler, Richard M.

1991-01-01

A hierarchical distributed control (HDC) model for coordinating cooperative problem-solving among intelligent systems is described. The model was implemented using SOCIAL, an innovative object-oriented tool for integrating heterogeneous, distributed software systems. SOCIAL embeds applications in 'wrapper' objects called Agents, which supply predefined capabilities for distributed communication, control, data specification, and translation. The HDC model is realized in SOCIAL as a 'Manager'Agent that coordinates interactions among application Agents. The HDC Manager: indexes the capabilities of application Agents; routes request messages to suitable server Agents; and stores results in a commonly accessible 'Bulletin-Board'. This centralized control model is illustrated in a fault diagnosis application for launch operations support of the Space Shuttle fleet at NASA, Kennedy Space Center.

Gun orientation in self-inflicted craniomaxillofacial gunshot wounds: risk factors associated with fatality.

PubMed

Johnson, J; Markiewicz, M R; Bell, R B; Potter, B E; Dierks, E J

2012-08-01

The purpose of this study was to evaluate whether orientation of a firearm predicts survival, and to identify risk factors associated with fatality in subjects with self-inflicted craniomaxillofacial gunshot wounds. A retrospective cohort study design was used. The primary predictor variable was orientation of the weapon, defined as in the coronal (lateral) or sagittal (anterior-posterior) trajectory pattern. The primary outcome variable was death for subjects on arrival or during their hospital stay. Other covariates measured include demographic, firearm-related, and psychosocial variables. Risk factors for fatality were identified using multivariate logistic regression. Of the 92 subjects that met study inclusion criteria, 47 (67.2) held the firearm in the coronal position. In the full multivariate model, coronal gun orientation (OR=7.7, 95% CI: 2.0, 30.1, p=0.003) and the absence of a psychiatric diagnosis were associated with an increased risk of fatality (OR=0.1, 95% CI: 0.04, 0.5, p=0.002). Coronal firearm orientation was associated with an increased risk of fatality following self-inflicted craniomaxillofacial gunshot injuries. A patient with a documented psychiatric disorder was not found to be more likely to succumb to this type of injury. Copyright © 2012 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Mapping cardiac fiber orientations from high-resolution DTI to high-frequency 3D ultrasound

NASA Astrophysics Data System (ADS)

Qin, Xulei; Wang, Silun; Shen, Ming; Zhang, Xiaodong; Wagner, Mary B.; Fei, Baowei

2014-03-01

The orientation of cardiac fibers affects the anatomical, mechanical, and electrophysiological properties of the heart. Although echocardiography is the most common imaging modality in clinical cardiac examination, it can only provide the cardiac geometry or motion information without cardiac fiber orientations. If the patient's cardiac fiber orientations can be mapped to his/her echocardiography images in clinical examinations, it may provide quantitative measures for diagnosis, personalized modeling, and image-guided cardiac therapies. Therefore, this project addresses the feasibility of mapping personalized cardiac fiber orientations to three-dimensional (3D) ultrasound image volumes. First, the geometry of the heart extracted from the MRI is translated to 3D ultrasound by rigid and deformable registration. Deformation fields between both geometries from MRI and ultrasound are obtained after registration. Three different deformable registration methods were utilized for the MRI-ultrasound registration. Finally, the cardiac fiber orientations imaged by DTI are mapped to ultrasound volumes based on the extracted deformation fields. Moreover, this study also demonstrated the ability to simulate electricity activations during the cardiac resynchronization therapy (CRT) process. The proposed method has been validated in two rat hearts and three canine hearts. After MRI/ultrasound image registration, the Dice similarity scores were more than 90% and the corresponding target errors were less than 0.25 mm. This proposed approach can provide cardiac fiber orientations to ultrasound images and can have a variety of potential applications in cardiac imaging.

Factors influencing superimposition error of 3D cephalometric landmarks by plane orientation method using 4 reference points: 4 point superimposition error regression model.

PubMed

Hwang, Jae Joon; Kim, Kee-Deog; Park, Hyok; Park, Chang Seo; Jeong, Ho-Gul

2014-01-01

Superimposition has been used as a method to evaluate the changes of orthodontic or orthopedic treatment in the dental field. With the introduction of cone beam CT (CBCT), evaluating 3 dimensional changes after treatment became possible by superimposition. 4 point plane orientation is one of the simplest ways to achieve superimposition of 3 dimensional images. To find factors influencing superimposition error of cephalometric landmarks by 4 point plane orientation method and to evaluate the reproducibility of cephalometric landmarks for analyzing superimposition error, 20 patients were analyzed who had normal skeletal and occlusal relationship and took CBCT for diagnosis of temporomandibular disorder. The nasion, sella turcica, basion and midpoint between the left and the right most posterior point of the lesser wing of sphenoidal bone were used to define a three-dimensional (3D) anatomical reference co-ordinate system. Another 15 reference cephalometric points were also determined three times in the same image. Reorientation error of each landmark could be explained substantially (23%) by linear regression model, which consists of 3 factors describing position of each landmark towards reference axes and locating error. 4 point plane orientation system may produce an amount of reorientation error that may vary according to the perpendicular distance between the landmark and the x-axis; the reorientation error also increases as the locating error and shift of reference axes viewed from each landmark increases. Therefore, in order to reduce the reorientation error, accuracy of all landmarks including the reference points is important. Construction of the regression model using reference points of greater precision is required for the clinical application of this model.

Automated knowledge generation

NASA Technical Reports Server (NTRS)

Myler, Harley R.; Gonzalez, Avelino J.

1988-01-01

The general objectives of the NASA/UCF Automated Knowledge Generation Project were the development of an intelligent software system that could access CAD design data bases, interpret them, and generate a diagnostic knowledge base in the form of a system model. The initial area of concentration is in the diagnosis of the process control system using the Knowledge-based Autonomous Test Engineer (KATE) diagnostic system. A secondary objective was the study of general problems of automated knowledge generation. A prototype was developed, based on object-oriented language (Flavors).

Effects of tracheal orientation on development of ventilator-associated pneumonia: an experimental study.

PubMed

Zanella, Alberto; Cressoni, Massimo; Epp, Myra; Hoffmann, Viktoria; Stylianou, Mario; Kolobow, Theodor

2012-04-01

Orientation of the trachea and tracheal tube below horizontal may prevent aspiration of oropharyngeal secretions into the lungs, which is a pivotal pathway in the pathogenesis of ventilator-associated pneumonia (VAP). The incidence of VAP was evaluated in swine with orientation of trachea and tracheal tube above horizontal (model of semirecumbent position, currently recommended in patients) and below horizontal. Twenty-six mini-pigs were randomized into four groups: (A) eight mechanically ventilated with orientation of trachea 45° above horizontal for 72 h. In the remaining groups (B, C, D) the trachea was oriented 10° below horizontal, with (B) six mechanically ventilated for 72 h, (C) six mechanically ventilated for 72 h with enteral feeding, and (D) six mechanically ventilated for 168 h with enteral feeding. At the end of the study period, all pigs were sacrificed and the clinical diagnosis of VAP was microbiologically evaluated. No antibiotics were administered. All eight pigs kept orientated with the trachea 45° above horizontal developed VAP and respiratory failure (PaO(2)/F(i)O(2) = 132 ± 139 mmHg) with a median of 5.5 pulmonary lobes out of 6 colonized with average colonization of 9.3 × 10(7) CFU/g. None of the 18 pigs kept oriented with the trachea below horizontal developed VAP; 16 had sterile lungs, while 2, ventilated for 7 days, developed a low level of colonization. Orientation of the trachea above horizontal was uniformly associated with VAP and respiratory failure; positioning the trachea below horizontal consistently prevented development of VAP.

Introduction to the JPA special issue: Can the Psychodynamic Diagnostic Manual put the complex person back at the center-stage of personality assessment?

PubMed

Huprich, Steven K; Meyer, Gregory J

2011-03-01

We briefly introduce this special issue, which focuses both on the Psychodynamic Diagnostic Manual (PDM) and the practice of idiographic, depth-oriented personality assessment. The 7 articles in this issue are diverse in scope but all address these 2 important topics. To set the stage, the special issue opens with a description of the history behind, the purposes of, and the steps taken to develop the PDM, and the next article provides a compelling illustration of depth-oriented personality assessment in the context of a long-term course of psychodynamic treatment. The third and fourth articles describe how the PDM model fosters attention to dynamic processes, not just overt symptoms, and they articulate the challenges and benefits of integrating this model into both the revitalized practice of assessment and diagnosis and the research avenues that will evaluate its validity and utility. The fifth article provides a broad overview of interesting experimental research on implicit processes from personality, social, and cognitive psychology, with implications for understanding and assessing dynamic processes. The sixth article illustrates how a PDM-based assessment of an adolescent boy helpfully contributed to his psychodynamic therapy. Finally, the issue closes with an illuminating article describing a PDM-based training model for the graduated development of assessment and diagnosis skills in a doctoral program. Overall, this special issue helps show how the PDM can invigorate multimethod personality assessment by placing the complex idiographic understanding of a person at the center-stage in the assessment process.

STD and HIV risk factors among U.S. young adults: variations by gender, race, ethnicity and sexual orientation.

PubMed

Mojola, Sanyu A; Everett, Bethany

2012-06-01

STDs, including HIV, disproportionately affect individuals who have multiple minority identities. Understanding differences in STD risk factors across racial, ethnic and sexual minority groups, as well as genders, is important for tailoring public health interventions. Data from Waves 3 (2001-2002) and 4 (2007-2008) of the National Longitudinal Study of Adolescent Health were used to develop population-based estimates of STD and HIV risk factors among 11,045 young adults (mean age, 29 at Wave 4), by gender, race and ethnicity, and sexual orientation (heterosexual, mixed-oriented, gay). Regression analyses were conducted to examine associations between risk factors and young adults' characteristics. Overall, sexual-minority women in each racial or ethnic group had a higher prevalence of sexual risk behaviors-including a history of multiple partners, forced sex and incarceration-than their heterosexual counterparts. Mixed-oriented women in each racial or ethnic group were more likely than heterosexual white women to have received an STD diagnosis (odds ratios, 1.8-6.4). Black men and sexual-minority men also appeared to be at heightened risk. Gay men in all racial and ethnic groups were significantly more likely than heterosexual white men to report having received an STD diagnosis (2.3-8.3); compared with heterosexual white men, mixed-oriented black men had the highest odds of having received such a diagnosis (15.2). Taking account of multiple minority identities should be an important part of future research and intervention efforts for STD and HIV prevention. Copyright © 2012 by the Guttmacher Institute.

Longitudinal patient-oriented outcomes in neuropathy

PubMed Central

Kerber, Kevin; Langa, Kenneth M.; Banerjee, Mousumi; Rodgers, Ann; McCammon, Ryan; Burke, James; Feldman, Eva

2015-01-01

Objective: To evaluate longitudinal patient-oriented outcomes in peripheral neuropathy over a 14-year time period including time before and after diagnosis. Methods: The 1996–2007 Health and Retirement Study (HRS)–Medicare Claims linked database identified incident peripheral neuropathy cases (ICD-9 codes) in patients ≥65 years. Using detailed demographic information from the HRS and Medicare claims, a propensity score method identified a matched control group without neuropathy. Patient-oriented outcomes, with an emphasis on self-reported falls, pain, and self-rated health (HRS interview), were determined before and after neuropathy diagnosis. Generalized estimating equations were used to assess differences in longitudinal outcomes between cases and controls. Results: We identified 953 peripheral neuropathy cases and 953 propensity-matched controls. The mean (SD) age was 77.4 (6.7) years for cases, 76.9 (6.6) years for controls, and 42.1% had diabetes. Differences were detected in falls 3.0 years before neuropathy diagnosis (case vs control; 32% vs 25%, p = 0.008), 5.0 years for pain (36% vs 27%, p = 0.002), and 5.0 years for good to excellent self-rated health (61% vs 74%, p < 0.0001). Over time, the proportion of fallers increased more rapidly in neuropathy cases compared to controls (p = 0.002), but no differences in pain (p = 0.08) or self-rated health (p = 0.9) were observed. Conclusions: In older persons, differences in falls, pain, and self-rated health can be detected 3–5 years prior to peripheral neuropathy diagnosis, but only falls deteriorates more rapidly over time in neuropathy cases compared to controls. Interventions to improve early peripheral neuropathy detection are needed, and future clinical trials should incorporate falls as a key patient-oriented outcome. PMID:26019191

[A symptom oriented diagnostic approach to the workup of secondary forms of uveitis -- an internet based program for better and easier orientation in differential diagnosis].

PubMed

Wiehler, U; Schmidt, R; Skonetzki, S; Becker, M

2006-05-01

The long list of ophthalmologic findings and symptoms at a baseline examination of a patient with uveitis can have an impact on further laboratory workup and differential diagnosis. Based on publications and previous work, a decision tree was transformed into the expert system shell D3. A web-based Java Servlet was then programmed and published on our website (http://www.uveitiscenter.de at DiagnoseFinder). Ophthalmologic findings and symptoms of the patient can be checked with this online questionnaire, and recommendations for further laboratory tests and further care of the patient received. Retrospective analysis of 62 patients with characteristic features of secondary uveitis showed a good correlation between the actual diagnosis of the patient and the diagnosis found by the program. In 74% of cases, the correct diagnosis was found among other options. In 37%, only the correct diagnosis was found, while in 37% the correct diagnosis was found among other probable diagnoses. Not all forms of secondary uveitis were found easily by the software. This program is meant to be an easily accessible and simply employable help for the care of patients with a secondary form of uveitis. It is intended to be a support not only for residents in particular, but also for ophthalmologists in private practice who rarely treat patients with uveitis.

Muscular MRI-based algorithm to differentiate inherited myopathies presenting with spinal rigidity.

PubMed

Tordjman, Mickael; Dabaj, Ivana; Laforet, Pascal; Felter, Adrien; Ferreiro, Ana; Biyoukar, Moustafa; Law-Ye, Bruno; Zanoteli, Edmar; Castiglioni, Claudia; Rendu, John; Beroud, Christophe; Chamouni, Alexandre; Richard, Pascale; Mompoint, Dominique; Quijano-Roy, Susana; Carlier, Robert-Yves

2018-05-25

Inherited myopathies are major causes of muscle atrophy and are often characterized by rigid spine syndrome, a clinical feature designating patients with early spinal contractures. We aim to present a decision algorithm based on muscular whole body magnetic resonance imaging (mWB-MRI) as a unique tool to orientate the diagnosis of each inherited myopathy long before the genetically confirmed diagnosis. This multicentre retrospective study enrolled 79 patients from referral centres in France, Brazil and Chile. The patients underwent 1.5-T or 3-T mWB-MRI. The protocol comprised STIR and T1 sequences in axial and coronal planes, from head to toe. All images were analyzed manually by multiple raters. Fatty muscle replacement was evaluated on mWB-MRI using both the Mercuri scale and statistical comparison based on the percentage of affected muscle. Between February 2005 and December 2015, 76 patients with genetically confirmed inherited myopathy were included. They were affected by Pompe disease or harbored mutations in RYR1, Collagen VI, LMNA, SEPN1, LAMA2 and MYH7 genes. Each myopathy had a specific pattern of affected muscles recognizable on mWB-MRI. This allowed us to create a novel decision algorithm for patients with rigid spine syndrome by segregating these signs. This algorithm was validated by five external evaluators on a cohort of seven patients with a diagnostic accuracy of 94.3% compared with the genetic diagnosis. We provide a novel decision algorithm based on muscle fat replacement graded on mWB-MRI that allows diagnosis and differentiation of inherited myopathies presenting with spinal rigidity. • Inherited myopathies are rare, diagnosis is challenging and genetic tests require specialized centres and often take years. • Inherited myopathies are often characterized by spinal rigidity. • Whole body magnetic resonance imaging is a unique tool to orientate the diagnosis of each inherited myopathy presenting with spinal rigidity. • Each inherited myopathy in this study has a specific pattern of affected muscles that orientate diagnosis. • A novel MRI-based algorithm, usable by every radiologist, can help the early diagnosis of these myopathies.

Reduced orienting to audiovisual synchrony in infancy predicts autism diagnosis at 3 years of age.

PubMed

Falck-Ytter, Terje; Nyström, Pär; Gredebäck, Gustaf; Gliga, Teodora; Bölte, Sven

2018-01-23

Effective multisensory processing develops in infancy and is thought to be important for the perception of unified and multimodal objects and events. Previous research suggests impaired multisensory processing in autism, but its role in the early development of the disorder is yet uncertain. Here, using a prospective longitudinal design, we tested whether reduced visual attention to audiovisual synchrony is an infant marker of later-emerging autism diagnosis. We studied 10-month-old siblings of children with autism using an eye tracking task previously used in studies of preschoolers. The task assessed the effect of manipulations of audiovisual synchrony on viewing patterns while the infants were observing point light displays of biological motion. We analyzed the gaze data recorded in infancy according to diagnostic status at 3 years of age (DSM-5). Ten-month-old infants who later received an autism diagnosis did not orient to audiovisual synchrony expressed within biological motion. In contrast, both infants at low-risk and high-risk siblings without autism at follow-up had a strong preference for this type of information. No group differences were observed in terms of orienting to upright biological motion. This study suggests that reduced orienting to audiovisual synchrony within biological motion is an early sign of autism. The findings support the view that poor multisensory processing could be an important antecedent marker of this neurodevelopmental condition. © 2018 Association for Child and Adolescent Mental Health.

Register cardiac fiber orientations from 3D DTI volume to 2D ultrasound image of rat hearts

NASA Astrophysics Data System (ADS)

Qin, Xulei; Wang, Silun; Shen, Ming; Zhang, Xiaodong; Lerakis, Stamatios; Wagner, Mary B.; Fei, Baowei

2015-03-01

Two-dimensional (2D) ultrasound or echocardiography is one of the most widely used examinations for the diagnosis of cardiac diseases. However, it only supplies the geometric and structural information of the myocardium. In order to supply more detailed microstructure information of the myocardium, this paper proposes a registration method to map cardiac fiber orientations from three-dimensional (3D) magnetic resonance diffusion tensor imaging (MR-DTI) volume to the 2D ultrasound image. It utilizes a 2D/3D intensity based registration procedure including rigid, log-demons, and affine transformations to search the best similar slice from the template volume. After registration, the cardiac fiber orientations are mapped to the 2D ultrasound image via fiber relocations and reorientations. This method was validated by six images of rat hearts ex vivo. The evaluation results indicated that the final Dice similarity coefficient (DSC) achieved more than 90% after geometric registrations; and the inclination angle errors (IAE) between the mapped fiber orientations and the gold standards were less than 15 degree. This method may provide a practical tool for cardiologists to examine cardiac fiber orientations on ultrasound images and have the potential to supply additional information for diagnosis of cardiac diseases.

[Low Fidelity Simulation of a Zero-Y Robot

NASA Technical Reports Server (NTRS)

Sweet, Adam

2001-01-01

The item to be cleared is a low-fidelity software simulation model of a hypothetical freeflying robot designed for use in zero gravity environments. This simulation model works with the HCC simulation system that was developed by Xerox PARC and NASA Ames Research Center. HCC has been previously cleared for distribution. When used with the HCC software, the model computes the location and orientation of the simulated robot over time. Failures (such as a broken motor) can be injected into the simulation to produce simulated behavior corresponding to the failure. Release of this simulation will allow researchers to test their software diagnosis systems by attempting to diagnose the simulated failure from the simulated behavior. This model does not contain any encryption software nor can it perform any control tasks that might be export controlled.

Anisotropic Shear Dispersion Parameterization for Mesoscale Eddy Transport

NASA Astrophysics Data System (ADS)

Reckinger, S. J.; Fox-Kemper, B.

2016-02-01

The effects of mesoscale eddies are universally treated isotropically in general circulation models. However, the processes that the parameterization approximates, such as shear dispersion, typically have strongly anisotropic characteristics. The Gent-McWilliams/Redi mesoscale eddy parameterization is extended for anisotropy and tested using 1-degree Community Earth System Model (CESM) simulations. The sensitivity of the model to anisotropy includes a reduction of temperature and salinity biases, a deepening of the southern ocean mixed-layer depth, and improved ventilation of biogeochemical tracers, particularly in oxygen minimum zones. The parameterization is further extended to include the effects of unresolved shear dispersion, which sets the strength and direction of anisotropy. The shear dispersion parameterization is similar to drifter observations in spatial distribution of diffusivity and high-resolution model diagnosis in the distribution of eddy flux orientation.

Mental-orientation: A new approach to assessing patients across the Alzheimer's disease spectrum.

PubMed

Peters-Founshtein, Gregory; Peer, Michael; Rein, Yanai; Kahana Merhavi, Shlomzion; Meiner, Zeev; Arzy, Shahar

2018-05-21

This study aims to assess the role of mental-orientation in the diagnosis of mild cognitive impairment and Alzheimer's disease using a novel task. A behavioral study (Experiment 1) compared the mental-orientation task to standard neuropsychological tests in patients across the Alzheimer's disease spectrum. A functional MRI study (Experiment 2) in young adults compared activations evoked by the mental-orientation and standard-orientation tasks as well as their overlap with brain regions susceptible to Alzheimer's disease pathology. The mental-orientation task differentiated mild cognitively impaired and healthy controls at 95% accuracy, while the Addenbrooke's Cognitive Examination, Mini-Mental State Examination and standard-orientation achieved 74%, 70% and 50% accuracy, respectively. Functional MRI revealed the mental-orientation task to preferentially recruit brain regions exhibiting early Alzheimer's-related atrophy, unlike the standard-orientation test. Mental-orientation is suggested to play a key role in Alzheimer's disease, and consequently in early detection and follow-up of patients along the Alzheimer's disease spectrum. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Integrated Approach To Design And Analysis Of Systems

NASA Technical Reports Server (NTRS)

Patterson-Hine, F. A.; Iverson, David L.

1993-01-01

Object-oriented fault-tree representation unifies evaluation of reliability and diagnosis of faults. Programming/fault tree described more fully in "Object-Oriented Algorithm For Evaluation Of Fault Trees" (ARC-12731). Augmented fault tree object contains more information than fault tree object used in quantitative analysis of reliability. Additional information needed to diagnose faults in system represented by fault tree.

Socially Prescribed and Self-Oriented Perfectionism as Predictors of Depressive Diagnosis in Preadolescents

ERIC Educational Resources Information Center

Huggins, Lauren; Davis, Melissa C.; Rooney, Rosanna; Kane, Robert

2008-01-01

Perfectionism has been shown to be related to depressive symptomatology in both adult and child populations. However, there are no known studies of levels of socially prescribed (SPP) and self-oriented perfectionism (SOP) in nonclinical children versus those with a clinically diagnosed depressive disorder. Therefore, the aim of the current study…

Assessment of sexual orientation using the hemodynamic brain response to visual sexual stimuli.

PubMed

Ponseti, Jorge; Granert, Oliver; Jansen, Olav; Wolff, Stephan; Mehdorn, Hubertus; Bosinski, Hartmut; Siebner, Hartwig

2009-06-01

The assessment of sexual orientation is of importance to the diagnosis and treatment of sex offenders and paraphilic disorders. Phallometry is considered gold standard in objectifying sexual orientation, yet this measurement has been criticized because of its intrusiveness and limited reliability. To evaluate whether the spatial response pattern to sexual stimuli as revealed by a change in blood oxygen level-dependent (BOLD) signal can be used for individual classification of sexual orientation. We used a preexisting functional MRI (fMRI) data set that had been acquired in a nonclinical sample of 12 heterosexual men and 14 homosexual men. During fMRI, participants were briefly exposed to pictures of same-sex and opposite-sex genitals. Data analysis involved four steps: (i) differences in the BOLD response to female and male sexual stimuli were calculated for each subject; (ii) these contrast images were entered into a group analysis to calculate whole-brain difference maps between homosexual and heterosexual participants; (iii) a single expression value was computed for each subject expressing its correspondence to the group result; and (iv) based on these expression values, Fisher's linear discriminant analysis and the kappa-nearest neighbor classification method were used to predict the sexual orientation of each subject. Sensitivity and specificity of the two classification methods in predicting individual sexual orientation. Both classification methods performed well in predicting individual sexual orientation with a mean accuracy of >85% (Fisher's linear discriminant analysis: 92% sensitivity, 85% specificity; kappa-nearest neighbor classification: 88% sensitivity, 92% specificity). Despite the small sample size, the functional response patterns of the brain to sexual stimuli contained sufficient information to predict individual sexual orientation with high accuracy. These results suggest that fMRI-based classification methods hold promise for the diagnosis of paraphilic disorders (e.g., pedophilia).

PSG-EXPERT. An expert system for the diagnosis of sleep disorders.

PubMed

Fred, A; Filipe, J; Partinen, M; Paiva, T

2000-01-01

This paper describes PSG-EXPERT, an expert system in the domain of sleep disorders exploring polysomnographic data. The developed software tool is addressed from two points of view: (1)--as an integrated environment for the development of diagnosis-oriented expert systems; (2)--as an auxiliary diagnosis tool in the particular domain of sleep disorders. Developed over a Windows platform, this software tool extends one of the most popular shells--CLIPS (C Language Integrated Production System) with the following features: backward chaining engine; graph-based explanation facilities; knowledge editor including a fuzzy fact editor and a rules editor, with facts-rules integrity checking; belief revision mechanism; built-in case generator and validation module. It therefore provides graphical support for knowledge acquisition, edition, explanation and validation. From an application domain point of view, PSG-Expert is an auxiliary diagnosis system for sleep disorders based on polysomnographic data, that aims at assisting the medical expert in his diagnosis task by providing automatic analysis of polysomnographic data, summarising the results of this analysis in terms of a report of major findings and possible diagnosis consistent with the polysomnographic data. Sleep disorders classification follows the International Classification of Sleep Disorders. Major features of the system include: browsing on patients data records; structured navigation on Sleep Disorders descriptions according to ASDA definitions; internet links to related pages; diagnosis consistent with polysomnographic data; graphical user-interface including graph-based explanatory facilities; uncertainty modelling and belief revision; production of reports; connection to remote databases.

Vertical and horizontal integration of knowledge and skills - a working model.

PubMed

Snyman, W D; Kroon, J

2005-02-01

The new integrated outcomes-based curriculum for dentistry was introduced at the University of Pretoria in 1997. The first participants graduated at the end of 2001. Educational principles that underpin the new innovative dental curriculum include vertical and horizontal integration, problem-oriented learning, student-centred learning, a holistic attitude to patient care and the promotion of oral health. The aim of this research project was to develop and assay a model to facilitate vertical integration of knowledge and skills thereby justifying the above mentioned action. The learning methodology proposed for the specific outcome of the Odontology module, namely the diagnosis of dental caries and the design of a primary preventive programme, included problem-solving as the driving force for the facilitation of vertical and horizontal integration, and an instructional design for the integration of the basic knowledge and clinical skills into a single learning programme. The paper describes the methodology of problem-oriented learning as applied in this study together with the detail of the programme. The consensus of those teachers who represent the basic and clinical sciences and who participate in this learning programme is that this model is practical and can assist vertical as well as horizontal integration of knowledge.

An integrated approach to system design, reliability, and diagnosis

NASA Technical Reports Server (NTRS)

Patterson-Hine, F. A.; Iverson, David L.

1990-01-01

The requirement for ultradependability of computer systems in future avionics and space applications necessitates a top-down, integrated systems ingeneering approach for design, implementation, testing, and operation. The functional analyses of hardware and software systems must be combined by models that are flexible enough to represent their interactions and behavior. The information contained in these models must be accessible throughout all phases of the system life cycle in order to maintain consistency and accuracy in design and operational decisions. One approach being taken by researchers at Ames Research Center is the creation of an object-oriented environment that integrates information about system components required in the reliability evaluation with behavioral information useful for diagnostic algorithms.

Computer tomographic evaluation of digestive tract non-Hodgkin lymphomas.

PubMed

Lupescu, Ioana G; Grasu, Mugur; Goldis, Gheorghe; Popa, Gelu; Gheorghe, Cristian; Vasilescu, Catalin; Moicean, Andreea; Herlea, Vlad; Georgescu, Serban A

2007-09-01

Computer Tomographic (CT) study is crucial for defining distribution, characteristics and staging of primary gastrointestinal lymphomas. The presence of multifocal sites, the wall thickening with diffuse infiltration of the affected gastrointestinal (GI) segment in association with regional adenopathies, permit the orientation of the CT diagnosis for primary GI lymphomas. The gold standard for diagnosis remains, in all cases of digestive tract non-Hodgkin lymphomas (NHL), the histological examination, which allows a tissue diagnosis, performed preferably by transmural biopsy.

MJO simulation in CMIP5 climate models: MJO skill metrics and process-oriented diagnosis

NASA Astrophysics Data System (ADS)

Ahn, Min-Seop; Kim, Daehyun; Sperber, Kenneth R.; Kang, In-Sik; Maloney, Eric; Waliser, Duane; Hendon, Harry

2017-12-01

The Madden-Julian Oscillation (MJO) simulation diagnostics developed by MJO Working Group and the process-oriented MJO simulation diagnostics developed by MJO Task Force are applied to 37 Coupled Model Intercomparison Project phase 5 (CMIP5) models in order to assess model skill in representing amplitude, period, and coherent eastward propagation of the MJO, and to establish a link between MJO simulation skill and parameterized physical processes. Process-oriented diagnostics include the Relative Humidity Composite based on Precipitation (RHCP), Normalized Gross Moist Stability (NGMS), and the Greenhouse Enhancement Factor (GEF). Numerous scalar metrics are developed to quantify the results. Most CMIP5 models underestimate MJO amplitude, especially when outgoing longwave radiation (OLR) is used in the evaluation, and exhibit too fast phase speed while lacking coherence between eastward propagation of precipitation/convection and the wind field. The RHCP-metric, indicative of the sensitivity of simulated convection to low-level environmental moisture, and the NGMS-metric, indicative of the efficiency of a convective atmosphere for exporting moist static energy out of the column, show robust correlations with a large number of MJO skill metrics. The GEF-metric, indicative of the strength of the column-integrated longwave radiative heating due to cloud-radiation interaction, is also correlated with the MJO skill metrics, but shows relatively lower correlations compared to the RHCP- and NGMS-metrics. Our results suggest that modifications to processes associated with moisture-convection coupling and the gross moist stability might be the most fruitful for improving simulations of the MJO. Though the GEF-metric exhibits lower correlations with the MJO skill metrics, the longwave radiation feedback is highly relevant for simulating the weak precipitation anomaly regime that may be important for the establishment of shallow convection and the transition to deep convection.

MJO simulation in CMIP5 climate models: MJO skill metrics and process-oriented diagnosis

DOE PAGES

Ahn, Min-Seop; Kim, Daehyun; Sperber, Kenneth R.; ...

2017-03-23

The Madden-Julian Oscillation (MJO) simulation diagnostics developed by MJO Working Group and the process-oriented MJO simulation diagnostics developed by MJO Task Force are applied to 37 Coupled Model Intercomparison Project phase 5 (CMIP5) models in order to assess model skill in representing amplitude, period, and coherent eastward propagation of the MJO, and to establish a link between MJO simulation skill and parameterized physical processes. Process-oriented diagnostics include the Relative Humidity Composite based on Precipitation (RHCP), Normalized Gross Moist Stability (NGMS), and the Greenhouse Enhancement Factor (GEF). Numerous scalar metrics are developed to quantify the results. Most CMIP5 models underestimate MJOmore » amplitude, especially when outgoing longwave radiation (OLR) is used in the evaluation, and exhibit too fast phase speed while lacking coherence between eastward propagation of precipitation/convection and the wind field. The RHCP-metric, indicative of the sensitivity of simulated convection to low-level environmental moisture, and the NGMS-metric, indicative of the efficiency of a convective atmosphere for exporting moist static energy out of the column, show robust correlations with a large number of MJO skill metrics. The GEF-metric, indicative of the strength of the column-integrated longwave radiative heating due to cloud-radiation interaction, is also correlated with the MJO skill metrics, but shows relatively lower correlations compared to the RHCP- and NGMS-metrics. Our results suggest that modifications to processes associated with moisture-convection coupling and the gross moist stability might be the most fruitful for improving simulations of the MJO. Though the GEF-metric exhibits lower correlations with the MJO skill metrics, the longwave radiation feedback is highly relevant for simulating the weak precipitation anomaly regime that may be important for the establishment of shallow convection and the transition to deep convection.« less

MJO simulation in CMIP5 climate models: MJO skill metrics and process-oriented diagnosis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahn, Min-Seop; Kim, Daehyun; Sperber, Kenneth R.

The Madden-Julian Oscillation (MJO) simulation diagnostics developed by MJO Working Group and the process-oriented MJO simulation diagnostics developed by MJO Task Force are applied to 37 Coupled Model Intercomparison Project phase 5 (CMIP5) models in order to assess model skill in representing amplitude, period, and coherent eastward propagation of the MJO, and to establish a link between MJO simulation skill and parameterized physical processes. Process-oriented diagnostics include the Relative Humidity Composite based on Precipitation (RHCP), Normalized Gross Moist Stability (NGMS), and the Greenhouse Enhancement Factor (GEF). Numerous scalar metrics are developed to quantify the results. Most CMIP5 models underestimate MJOmore » amplitude, especially when outgoing longwave radiation (OLR) is used in the evaluation, and exhibit too fast phase speed while lacking coherence between eastward propagation of precipitation/convection and the wind field. The RHCP-metric, indicative of the sensitivity of simulated convection to low-level environmental moisture, and the NGMS-metric, indicative of the efficiency of a convective atmosphere for exporting moist static energy out of the column, show robust correlations with a large number of MJO skill metrics. The GEF-metric, indicative of the strength of the column-integrated longwave radiative heating due to cloud-radiation interaction, is also correlated with the MJO skill metrics, but shows relatively lower correlations compared to the RHCP- and NGMS-metrics. Our results suggest that modifications to processes associated with moisture-convection coupling and the gross moist stability might be the most fruitful for improving simulations of the MJO. Though the GEF-metric exhibits lower correlations with the MJO skill metrics, the longwave radiation feedback is highly relevant for simulating the weak precipitation anomaly regime that may be important for the establishment of shallow convection and the transition to deep convection.« less

The value of ultrasounds exam correlated with frozen section diagnosis in the breast tumors.

PubMed

Venter, Alina; Roşca, Elena; Muţiu, Gabriela; Pirte, Adriana; Roşca, D M

2010-01-01

The paper represents a parallel study regarding the harmony between the ultrasounds and the frozen section diagnosis in the breast cancer. We examined at an ultrasounds machine a group of 146 women aged between 16-73-year-old, which came presenting palpable formations at the level of breasts, in the Pelican Medical Centre from Oradea. The suspect lesions were subject to excisional biopsy or surgical intervention. The elements followed at the ultrasounds exam were: echogenicity, echostructure, contour, presence and absence of posterior shadowing, microcalcifiation, orientation of lesion, compressibility, aspect of adjacent structures. Histopathological diagnosis of suspect lesions emphasized malignant lesions in a percentage of 64.86% of cases; the frozen section exam diagnosed invasive ductal carcinoma in 86% of the cases, invasive lobular carcinoma 8%, medullar carcinoma 2%, and benign lesions 4%. The clinical-anatomopathological collaboration is absolutely compulsory for a correct microscopic diagnosis. The ultrasounds modifications separated after the criteria taken into account allow the orientation of diagnosis to malignant-benign. At 14% of the women examined, additional lesions were identified in comparison to those palpated, the ultrasounds having a role in detecting the multifocality and muticentricity of lesions. At 29.05% from the identified lesions, malignant lesions were histopathologically identified. The frozen section diagnosis in the breast cancer allows a rapid diagnosis, correct in high percentage of cases, allowing taking an intra-surgery therapeutic attitude in only one surgical intervention, thus reducing the costs. The anatomopathologist's experience reduces the diagnosis risk in excess and÷or in minus.

Proceedings of the First NASA Formal Methods Symposium

NASA Technical Reports Server (NTRS)

Denney, Ewen (Editor); Giannakopoulou, Dimitra (Editor); Pasareanu, Corina S. (Editor)

2009-01-01

Topics covered include: Model Checking - My 27-Year Quest to Overcome the State Explosion Problem; Applying Formal Methods to NASA Projects: Transition from Research to Practice; TLA+: Whence, Wherefore, and Whither; Formal Methods Applications in Air Transportation; Theorem Proving in Intel Hardware Design; Building a Formal Model of a Human-Interactive System: Insights into the Integration of Formal Methods and Human Factors Engineering; Model Checking for Autonomic Systems Specified with ASSL; A Game-Theoretic Approach to Branching Time Abstract-Check-Refine Process; Software Model Checking Without Source Code; Generalized Abstract Symbolic Summaries; A Comparative Study of Randomized Constraint Solvers for Random-Symbolic Testing; Component-Oriented Behavior Extraction for Autonomic System Design; Automated Verification of Design Patterns with LePUS3; A Module Language for Typing by Contracts; From Goal-Oriented Requirements to Event-B Specifications; Introduction of Virtualization Technology to Multi-Process Model Checking; Comparing Techniques for Certified Static Analysis; Towards a Framework for Generating Tests to Satisfy Complex Code Coverage in Java Pathfinder; jFuzz: A Concolic Whitebox Fuzzer for Java; Machine-Checkable Timed CSP; Stochastic Formal Correctness of Numerical Algorithms; Deductive Verification of Cryptographic Software; Coloured Petri Net Refinement Specification and Correctness Proof with Coq; Modeling Guidelines for Code Generation in the Railway Signaling Context; Tactical Synthesis Of Efficient Global Search Algorithms; Towards Co-Engineering Communicating Autonomous Cyber-Physical Systems; and Formal Methods for Automated Diagnosis of Autosub 6000.

Reducing the orientation influence of Mueller matrix measurements for anisotropic scattering media

NASA Astrophysics Data System (ADS)

Sun, Minghao; He, Honghui; Zeng, Nan; Du, E.; He, Yonghong; Ma, Hui

2014-09-01

Mueller matrix polarimetry techniques contain rich micro-structural information of samples, such as the sizes and refractive indices of scatterers. Recently, Mueller matrix imaging methods have shown great potentials as powerful tools for biomedical diagnosis. However, the orientations of anisotropic fibrous structures in tissues have prominent influence on Mueller matrix measurements, resulting in difficulties for extracting micro-structural information effectively. In this paper, we apply the backscattering Mueller matrix imaging technique to biological samples with different microstructures, such as chicken heart muscle, bovine skeletal muscle, porcine liver and fat tissues. Experimental results show that the directions of the muscle fibers have prominent influence on the Mueller matrix elements. In order to reduce the orientation influence, we adopt the rotation-independent MMT and RLPI parameters, which were proposed in our previous studies, to the tissue samples. Preliminary results in this paper show that the orientation-independent parameters and their statistic features are helpful for analyzing the tissues to obtain their micro-structural properties. Since the micro-structure variations are often related to the pathological changes, the method can be applied to microscope imaging techniques and used to detect abnormal tissues such as cancer and other lesions for diagnosis purposes.

Cooperation between mental health professionals and doctors in a Balint-oriented supervision group.

PubMed

Keinänen, M

2001-01-01

A Balint-oriented supervision group for physicians is described concentrating on the study of the patient-doctor relationship, the recognition and diagnosis of psychiatric problems, and the planning of psychiatric treatment. The group includes five general practitioners, a gynecologist, a dermatologist, a psychiatrist and a psychologist, who have met once a month for an hour over a period of 12 years. Interaction between the physicians and the mental health professionals is illustrated by two clinical examples. The group helps the physician recognize, tolerate and use his countertransference feelings, and facilitates the examination and treatment of patients suffering from psychiatric problems. In Balint-oriented group work, the focus can be moved from physical symptoms to include observation of the patient's emotional life and significant object relations, to the factors that are crucial for his psychological balance. This kind of holistic observation in the examination and treatment of psychiatric problems is as important as appropriate laboratory investigations in the diagnosis and care of physical diseases.

The role of clinical experience, diagnosis, and theoretical orientation in the treatment of posttraumatic and dissociative disorders: A vignette and survey investigation.

PubMed

Dorahy, Martin J; Lewis-Fernández, Roberto; Krüger, Christa; Brand, Bethany L; Şar, Vedat; Ewing, Jan; Martínez-Taboas, Alfonso; Stavropoulos, Pam; Middleton, Warwick

2017-01-01

Controversy exists regarding the merits of exposure-based treatments for posttraumatic stress disorder (PTSD) versus a phased approach when prominent dissociative symptoms are present. The first aim of this study was to examine the degree to which diagnosing dissociation in two traumatized patients' vignettes influenced clinicians' preference for phase-oriented treatment and whether clinicians' treatment experience contributed to their treatment preference. The second aim was to assess the extent to which participants had observed traumatized patients worsen when treated with exposure therapy or phase-oriented therapy and whether the theoretical orientation and treatment experience of the clinician were related to the observed deterioration. In the tradition of expert and practitioner surveys, 263 clinicians completed a survey of their diagnoses and treatment preferences for two vignettes and their treatment experience, theoretical orientation, and observations of patients' deterioration. When a marked degree of dissociation was noted in the PTSD vignette, respondents favored phased approaches regardless of the diagnosis given. Reports of having observed patient deterioration during both exposure and phased therapy were predicted by years of experience. Psychodynamic therapists reported more observations of worsening during exposure therapy than cognitive behavior therapy therapists. Clinical experience treating PTSD may heighten awareness of negative therapeutic effects, potentially because experienced clinicians have a lower threshold for detecting such effects and because they are referred more challenging cases.

[Business organization theory: its potential use in the organization of the operating room].

PubMed

Bartz, H-J

2005-07-01

The paradigm of patient care in the German health system is changing. The introduction of German Diagnosis Related Groups (G-DRGs), a diagnosis-related coding system, has made process-oriented thinking increasingly important. The treatment process is viewed and managed as a whole from the admission to the discharge of the patient. The interfaces of departments and sectors are diminished. A main objective of these measures is to render patient care more cost efficient. Within the hospital, the operating room (OR) is the most expensive factor accounting for 25 - 50 % of the costs of a surgical patient and is also a bottleneck in the surgical patient care. Therefore, controlling of the perioperative treatment process is getting more and more important. Here, the business organisation theory can be a very useful tool. Especially the concepts of process organisation and process management can be applied to hospitals. Process-oriented thinking uncovers and solves typical organisational problems. Competences, responsibilities and tasks are reorganised by process orientation and the enterprise is gradually transformed to a process-oriented system. Process management includes objective-oriented controlling of the value chain of an enterprise with regard to quality, time, costs and customer satisfaction. The quality of the process is continuously improved using process-management techniques. The main advantage of process management is consistent customer orientation. Customer orientation means to be aware of the customer's needs at any time during the daily routine. The performance is therefore always directed towards current market requirements. This paper presents the basics of business organisation theory and to point out its potential use in the organisation of the OR.

The role of skin and muscle biopsy in the diagnosis of main connective tissue diseases.

PubMed

Firulescu, Sineta Cristina; Tudoraşcu, Diana Rodica; Pârvănescu, Cristina Dorina; Chisălău, Andreea Beatrice; Bastian, Alexandra Eugenia; Efrem, Ion Cristian; Bărbulescu, Andreea Lili; Forţofoiu, Mircea Cătălin; Criveanu, Cristina; Ionescu, Petronela; Dinescu, Ştefan Cristian; Tudorancea, Andreea Daniela; Ciurea, Paulina Lucia; Vreju, Ananu Florentin

2018-01-01

Systemic involvement in autoimmune diseases is often unclear and organ changes are confounding, thus making it difficult to have an early accurate diagnosis. In those situations, both clinical and paraclinical findings might orientate the diagnosis, but only histological or immunohistochemistry changes might be accurate enough. The skin histological changes are relevant and sometimes might have a tremendous role in the accurate diagnosis of autoimmune rheumatic diseases, due to the correlation with the clinical systemic manifestations of the diseases and through the accessibility of biopsy. In the same time, muscle biopsy can provide important support for physicians improving diagnosis and optimizing management of connective tissue diseases.

Segmentation of prostate biopsy needles in transrectal ultrasound images

NASA Astrophysics Data System (ADS)

Krefting, Dagmar; Haupt, Barbara; Tolxdorff, Thomas; Kempkensteffen, Carsten; Miller, Kurt

2007-03-01

Prostate cancer is the most common cancer in men. Tissue extraction at different locations (biopsy) is the gold-standard for diagnosis of prostate cancer. These biopsies are commonly guided by transrectal ultrasound imaging (TRUS). Exact location of the extracted tissue within the gland is desired for more specific diagnosis and provides better therapy planning. While the orientation and the position of the needle within clinical TRUS image are limited, the appearing length and visibility of the needle varies strongly. Marker lines are present and tissue inhomogeneities and deflection artefacts may appear. Simple intensity, gradient oder edge-detecting based segmentation methods fail. Therefore a multivariate statistical classificator is implemented. The independent feature model is built by supervised learning using a set of manually segmented needles. The feature space is spanned by common binary object features as size and eccentricity as well as imaging-system dependent features like distance and orientation relative to the marker line. The object extraction is done by multi-step binarization of the region of interest. The ROI is automatically determined at the beginning of the segmentation and marker lines are removed from the images. The segmentation itself is realized by scale-invariant classification using maximum likelihood estimation and Mahalanobis distance as discriminator. The technique presented here could be successfully applied in 94% of 1835 TRUS images from 30 tissue extractions. It provides a robust method for biopsy needle localization in clinical prostate biopsy TRUS images.

A mediational model of self-esteem and social problem-solving in anorexia nervosa.

PubMed

Paterson, Gillian; Power, Kevin; Collin, Paula; Greirson, David; Yellowlees, Alex; Park, Katy

2011-01-01

Poor problem-solving and low self-esteem are frequently cited as significant factors in the development and maintenance of anorexia nervosa. The current study examines the multi-dimensional elements of these measures and postulates a model whereby self-esteem mediates the relationship between social problems-solving and anorexic pathology and considers the implications of this pathway. Fifty-five inpatients with a diagnosis of anorexia nervosa and 50 non-clinical controls completed three standardised multi-dimensional questionnaires pertaining to social problem-solving, self-esteem and eating pathology. Significant differences were yielded between clinical and non-clinical samples on all measures. Within the clinical group, elements of social problem-solving most significant to anorexic pathology were positive problem orientation, negative problem orientation and avoidance. Components of self-esteem most significant to anorexic pathology were eating, weight and shape concern but not eating restraint. The mediational model was upheld with social problem-solving impacting on anorexic pathology through the existence of low self-esteem. Problem orientation, that is, the cognitive processes of social problem-solving appear to be more significant than problem-solving methods in individuals with anorexia nervosa. Negative perceptions of eating, weight and shape appear to impact on low self-esteem but level of restriction does not. Finally, results indicate that self-esteem is a significant factor in the development and execution of positive or negative social problem-solving in individuals with anorexia nervosa by mediating the relationship between those two variables. Copyright © 2010 John Wiley & Sons, Ltd and Eating Disorders Association.

Associations Between Sexual Orientation and Overall and Site-Specific Diagnosis of Cancer: Evidence From Two National Patient Surveys in England.

PubMed

Saunders, Catherine L; Meads, Catherine; Abel, Gary A; Lyratzopoulos, Georgios

2017-11-10

Purpose To address gaps in evidence on the risk of cancer in people from sexual minorities. Patients and Methods We used data from 796,594 population-based English General Practice Patient Survey responders to explore the prevalence of self-reported diagnoses of cancer in the last 5 years among sexual minorities compared with heterosexual women and men. We analyzed data from 249,010 hospital-based English Cancer Patient Experience Survey responders with sexual orientation as a binary outcome, and International Classification of Diseases, Tenth, Revision, diagnosis as covariate-38 different common and rarer cancers, with breast and prostate cancer as baseline categories for women and men, respectively-to examine whether people from sexual minorities are over- or under-represented among different cancer sites. For both analyses, we used logistic regression, stratified by sex and adjusted for age. Results A diagnosis of cancer in the past 5 years was more commonly reported by male General Practice Patient Survey responders who endorsed gay or bisexual orientation compared with heterosexual men (odds ratio [OR], 1.31; 95% CI, 1.15 to 1.49; P < .001) without evidence of a difference between lesbian or bisexual compared with heterosexual women (OR, 1.14; 95% CI, 0.94 to 1.37; P = .19). For most common and rarer cancer sites (30 of 33 in women, 28 of 32 in men), the odds of specific cancer site diagnosis among Cancer Patient Experience Survey respondents seemed to be independent of sexual orientation; however, there were notable differences in infection-related (HIV and human papillomavirus [HPV]) cancers. Gay or bisexual men were over-represented among men with Kaposi's sarcoma (OR, 48.2; 95% CI, 22.0 to 105.6), anal (OR, 15.5; 95% CI, 11.0 to 21.9), and penile cancer (OR, 1.8; 95% CI, 0.9 to 3.7). Lesbian or bisexual women were over-represented among women with oropharyngeal cancer (OR, 3.2; 95% CI, 1.7 to 6.0). Conclusion Large-scale evidence indicates that the distribution of cancer sites does not vary substantially by sexual orientation, with the exception of some HPV- and HIV-associated cancers. These findings highlight the importance of HPV vaccination in heterosexual and sexual minority populations.

Methods in preimplantation genetic diagnosis.

PubMed

Lizcano Gil, Luis Arturo; Lucena, Carolina; Lucena, Elkin

2001-01-01

Preimplantation genetic diagnosis (PGD) is a new strategy, orientated toward primary prevention of congenital anomalies in couples with reproductive risk, such as advanced maternal age, carriers of chromosomal abnormalities, and carriers of monogenic conditions. For these patients, PGD is an acceptable alternative to prenatal diagnosis, mainly in those countries where pregnancy interruption is forbidden by law. PGD effectively avoids the implications linked to traditional prenatal diagnosis. Centres that provide medical servicies on reproductive biomedicine are responsible for the development and improvement of this new prevention strategy. Thanks to advances in micromanipulation techniques, associated with recent progress in molecular genetics, PGD may be employed for any genetic condition in the future.

Looking around: 35 years of oculomotor modeling

NASA Technical Reports Server (NTRS)

Young, L. R.

1995-01-01

Eye movements have attracted an unusually large number of researchers from many disparate fields, especially over the past 35 years. The lure of this system stemmed from its apparent simplicity of description, measurement, and analysis, as well as the promise of providing a "window in the mind." Investigators in areas ranging from biological control systems and neurological diagnosis to applications in advertising and flight simulation expected eye movements to provide clear indicators of what the sensory-motor system was accomplishing and what the brain found to be of interest. The parallels between compensatory eye movements and perception of spatial orientation have been a subject for active study in visual-vestibular interaction, where substantial knowledge has accumulated through experiments largely guided by the challenge of proving or disproving model predictions. Even though oculomotor control has arguably benefited more from systems theory than any other branch of motor control, many of the original goals remain largely unfulfilled. This paper considers some of the promising potential benefits of eye movement research and compares accomplishments with anticipated results. Four topics are considered in greater detail: (i) the definition of oculomotor system input and output, (ii) optimization of the eye movement system, (iii) the relationship between compensatory eye movements and spatial orientation through the "internal model," and (iv) the significance of eye movements as measured in (outer) space.

Looking around: 35 years of oculomotor modeling.

PubMed

Young, L R

1995-01-01

Eye movements have attracted an unusually large number of researchers from many disparate fields, especially over the past 35 years. The lure of this system stemmed from its apparent simplicity of description, measurement, and analysis, as well as the promise of providing a "window in the mind." Investigators in areas ranging from biological control systems and neurological diagnosis to applications in advertising and flight simulation expected eye movements to provide clear indicators of what the sensory-motor system was accomplishing and what the brain found to be of interest. The parallels between compensatory eye movements and perception of spatial orientation have been a subject for active study in visual-vestibular interaction, where substantial knowledge has accumulated through experiments largely guided by the challenge of proving or disproving model predictions. Even though oculomotor control has arguably benefited more from systems theory than any other branch of motor control, many of the original goals remain largely unfulfilled. This paper considers some of the promising potential benefits of eye movement research and compares accomplishments with anticipated results. Four topics are considered in greater detail: (i) the definition of oculomotor system input and output, (ii) optimization of the eye movement system, (iii) the relationship between compensatory eye movements and spatial orientation through the "internal model," and (iv) the significance of eye movements as measured in (outer) space.

Use of Tethered Enzymes as a Platform Technology for Rapid Analyte Detection

PubMed Central

Cohen, Roy; Lata, James P.; Lee, Yurim; Hernández, Jean C. Cruz; Nishimura, Nozomi; Schaffer, Chris B.; Mukai, Chinatsu; Nelson, Jacquelyn L.; Brangman, Sharon A.; Agrawal, Yash; Travis, Alexander J.

2015-01-01

Background Rapid diagnosis for time-sensitive illnesses such as stroke, cardiac arrest, and septic shock is essential for successful treatment. Much attention has therefore focused on new strategies for rapid and objective diagnosis, such as Point-of-Care Tests (PoCT) for blood biomarkers. Here we use a biomimicry-based approach to demonstrate a new diagnostic platform, based on enzymes tethered to nanoparticles (NPs). As proof of principle, we use oriented immobilization of pyruvate kinase (PK) and luciferase (Luc) on silica NPs to achieve rapid and sensitive detection of neuron-specific enolase (NSE), a clinically relevant biomarker for multiple diseases ranging from acute brain injuries to lung cancer. We hypothesize that an approach capitalizing on the speed and catalytic nature of enzymatic reactions would enable fast and sensitive biomarker detection, suitable for PoCT devices. Methods and findings We performed in-vitro, animal model, and human subject studies. First, the efficiency of coupled enzyme activities when tethered to NPs versus when in solution was tested, demonstrating a highly sensitive and rapid detection of physiological and pathological concentrations of NSE. Next, in rat stroke models the enzyme-based assay was able in minutes to show a statistically significant increase in NSE levels in samples taken 1 hour before and 0, 1, 3 and 6 hours after occlusion of the distal middle cerebral artery. Finally, using the tethered enzyme assay for detection of NSE in samples from 20 geriatric human patients, we show that our data match well (r = 0.815) with the current gold standard for biomarker detection, ELISA—with a major difference being that we achieve detection in 10 minutes as opposed to the several hours required for traditional ELISA. Conclusions Oriented enzyme immobilization conferred more efficient coupled activity, and thus higher assay sensitivity, than non-tethered enzymes. Together, our findings provide proof of concept for using oriented immobilization of active enzymes on NPs as the basis for a highly rapid and sensitive biomarker detection platform. This addresses a key challenge in developing a PoCT platform for time sensitive and difficult to diagnose pathologies. PMID:26605916

Effect of resonant magnetic perturbations on three dimensional equilibria in the Madison Symmetric Torus reversed-field pinch

NASA Astrophysics Data System (ADS)

Munaretto, S.; Chapman, B. E.; Nornberg, M. D.; Boguski, J.; DuBois, A. M.; Almagri, A. F.; Sarff, J. S.

2016-05-01

The orientation of 3D equilibria in the Madison Symmetric Torus (MST) [R. N. Dexter et al., Fusion Technol. 19, 131 (1991)] reversed-field pinch can now be controlled with a resonant magnetic perturbation (RMP). Absent the RMP, the orientation of the stationary 3D equilibrium varies from shot to shot in a semi-random manner, making its diagnosis difficult. Produced with a poloidal array of saddle coils at the vertical insulated cut in MST's thick conducting shell, an m = 1 RMP with an amplitude br/B ˜ 10% forces the 3D structure into any desired orientation relative to MST's diagnostics. This control has led to improved diagnosis, revealing enhancements in both the central electron temperature and density. With sufficient amplitude, the RMP also inhibits the generation of high-energy (>20 keV) electrons, which otherwise emerge due to a reduction in magnetic stochasticity in the core. Field line tracing reveals that the RMP reintroduces stochasticity to the core. A m = 3 RMP of similar amplitude has little effect on the magnetic topology or the high-energy electrons.

Design and analysis of a tendon-based computed tomography-compatible robot with remote center of motion for lung biopsy.

PubMed

Yang, Yunpeng; Jiang, Shan; Yang, Zhiyong; Yuan, Wei; Dou, Huaisu; Wang, Wei; Zhang, Daguang; Bian, Yuan

2017-04-01

Nowadays, biopsy is a decisive method of lung cancer diagnosis, whereas lung biopsy is time-consuming, complex and inaccurate. So a computed tomography-compatible robot for rapid and precise lung biopsy is developed in this article. According to the actual operation process, the robot is divided into two modules: 4-degree-of-freedom position module for location of puncture point is appropriate for patient's almost all positions and 3-degree-of-freedom tendon-based orientation module with remote center of motion is compact and computed tomography-compatible to orientate and insert needle automatically inside computed tomography bore. The workspace of the robot surrounds patient's thorax, and the needle tip forms a cone under patient's skin. A new error model of the robot based on screw theory is proposed in view of structure error and actuation error, which are regarded as screw motions. Simulation is carried out to verify the precision of the error model contrasted with compensation via inverse kinematics. The results of insertion experiment on specific phantom prove the feasibility of the robot with mean error of 1.373 mm in laboratory environment, which is accurate enough to replace manual operation.

Improving Visibility of Stereo-Radiographic Spine Reconstruction with Geometric Inferences.

PubMed

Kumar, Sampath; Nayak, K Prabhakar; Hareesha, K S

2016-04-01

Complex deformities of the spine, like scoliosis, are evaluated more precisely using stereo-radiographic 3D reconstruction techniques. Primarily, it uses six stereo-corresponding points available on the vertebral body for the 3D reconstruction of each vertebra. The wireframe structure obtained in this process has poor visualization, hence difficult to diagnose. In this paper, a novel method is proposed to improve the visibility of this wireframe structure using a deformation of a generic spine model in accordance with the 3D-reconstructed corresponding points. Then, the geometric inferences like vertebral orientations are automatically extracted from the radiographs to improve the visibility of the 3D model. Biplanar radiographs are acquired from five scoliotic subjects on a specifically designed calibration bench. The stereo-corresponding point reconstruction method is used to build six-point wireframe vertebral structures and thus the entire spine model. Using the 3D spine midline and automatically extracted vertebral orientation features, a more realistic 3D spine model is generated. To validate the method, the 3D spine model is back-projected on biplanar radiographs and the error difference is computed. Though, this difference is within the error limits available in the literature, the proposed work is simple and economical. The proposed method does not require more corresponding points and image features to improve the visibility of the model. Hence, it reduces the computational complexity. Expensive 3D digitizer and vertebral CT scan models are also excluded from this study. Thus, the visibility of stereo-corresponding point reconstruction is improved to obtain a low-cost spine model for a better diagnosis of spinal deformities.

Computer-aided diagnosis of cavernous malformations in brain MR images.

PubMed

Wang, Huiquan; Ahmed, S Nizam; Mandal, Mrinal

2018-06-01

Cavernous malformation or cavernoma is one of the most common epileptogenic lesions. It is a type of brain vessel abnormality that can cause serious symptoms such as seizures, intracerebral hemorrhage, and various neurological disorders. Manual detection of cavernomas by physicians in a large set of brain MRI slices is a time-consuming and labor-intensive task and often delays diagnosis. In this paper, we propose a computer-aided diagnosis (CAD) system for cavernomas based on T2-weighted axial plane MRI image analysis. The proposed technique first extracts the brain area based on atlas registration and active contour model, and then performs template matching to obtain candidate cavernoma regions. Texture, the histogram of oriented gradients and local binary pattern features of each candidate region are calculated, and principal component analysis is applied to reduce the feature dimensionality. Support vector machines (SVMs) are finally used to classify each region into cavernoma or non-cavernoma so that most of the false positives (obtained by template matching) are eliminated. The performance of the proposed CAD system is evaluated and experimental results show that it provides superior performance in cavernoma detection compared to existing techniques. Copyright © 2018 Elsevier Ltd. All rights reserved.

[Ultrasound findings in rhabdomyolysis].

PubMed

Carrillo-Esper, Raúl; Galván-Talamantes, Yazmin; Meza-Ayala, Cynthia Margarita; Cruz-Santana, Julio Alberto; Bonilla-Reséndiz, Luis Ignacio

Rhabdomyolysis is defined as skeletal muscle necrosis. Ultrasound assessment has recently become a useful tool for the diagnosis and monitoring of muscle diseases, including rhabdomyolysis. A case is presented on the ultrasound findings in a patient with rhabdomyolysis. To highlight the importance of ultrasound as an essential part in the diagnosis in rhabdomyolysis, to describe the ultrasound findings, and review the literature. A 30 year-old with post-traumatic rhabdomyolysis of both thighs. Ultrasound was performed using a Philips Sparq model with a high-frequency linear transducer (5-10MHz), in low-dimensional scanning mode (2D), in longitudinal and transverse sections at the level of both thighs. The images obtained showed disorganisation of the orientation of the muscle fibres, ground glass image, thickening of the muscular fascia, and the presence of anechoic areas. Ultrasound is a useful tool in the evaluation of rhabdomyolysis. Copyright © 2015 Academia Mexicana de Cirugía A.C. Publicado por Masson Doyma México S.A. All rights reserved.

42 CFR 482.61 - Condition of participation: Special medical record requirements for psychiatric hospitals.

Code of Federal Regulations, 2010 CFR

2010-10-01

...— (i) A substantiated diagnosis; (ii) Short-term and long-range goals; (iii) The specific treatment...) Describe attitudes and behavior; (6) Estimate intellectual functioning, memory functioning, and orientation...

Integrating nursing diagnostic concepts into the medical entities dictionary using the ISO Reference Terminology Model for Nursing Diagnosis.

PubMed

Hwang, Jee-In; Cimino, James J; Bakken, Suzanne

2003-01-01

The purposes of the study were (1) to evaluate the usefulness of the International Standards Organization (ISO) Reference Terminology Model for Nursing Diagnoses as a terminology model for defining nursing diagnostic concepts in the Medical Entities Dictionary (MED) and (2) to create the additional hierarchical structures required for integration of nursing diagnostic concepts into the MED. The authors dissected nursing diagnostic terms from two source terminologies (Home Health Care Classification and the Omaha System) into the semantic categories of the ISO model. Consistent with the ISO model, they selected Focus and Judgment as required semantic categories for creating intensional definitions of nursing diagnostic concepts in the MED. Because the MED does not include Focus and Judgment hierarchies, the authors developed them to define the nursing diagnostic concepts. The ISO model was sufficient for dissecting the source terminologies into atomic terms. The authors identified 162 unique focus concepts from the 266 nursing diagnosis terms for inclusion in the Focus hierarchy. For the Judgment hierarchy, the authors precoordinated Judgment and Potentiality instead of using Potentiality as a qualifier of Judgment as in the ISO model. Impairment and Alteration were the most frequently occurring judgments. Nursing care represents a large proportion of health care activities; thus, it is vital that terms used by nurses are integrated into concept-oriented terminologies that provide broad coverage for the domain of health care. This study supports the utility of the ISO Reference Terminology Model for Nursing Diagnoses as a facilitator for the integration process.

Integrating Nursing Diagnostic Concepts into the Medical Entities Dictionary Using the ISO Reference Terminology Model for Nursing Diagnosis

PubMed Central

Hwang, Jee-In; Cimino, James J.; Bakken, Suzanne

2003-01-01

Objective: The purposes of the study were (1) to evaluate the usefulness of the International Standards Organization (ISO) Reference Terminology Model for Nursing Diagnoses as a terminology model for defining nursing diagnostic concepts in the Medical Entities Dictionary (MED) and (2) to create the additional hierarchical structures required for integration of nursing diagnostic concepts into the MED. Design and Measurements: The authors dissected nursing diagnostic terms from two source terminologies (Home Health Care Classification and the Omaha System) into the semantic categories of the ISO model. Consistent with the ISO model, they selected Focus and Judgment as required semantic categories for creating intensional definitions of nursing diagnostic concepts in the MED. Because the MED does not include Focus and Judgment hierarchies, the authors developed them to define the nursing diagnostic concepts. Results: The ISO model was sufficient for dissecting the source terminologies into atomic terms. The authors identified 162 unique focus concepts from the 266 nursing diagnosis terms for inclusion in the Focus hierarchy. For the Judgment hierarchy, the authors precoordinated Judgment and Potentiality instead of using Potentiality as a qualifier of Judgment as in the ISO model. Impairment and Alteration were the most frequently occurring judgments. Conclusions: Nursing care represents a large proportion of health care activities; thus, it is vital that terms used by nurses are integrated into concept-oriented terminologies that provide broad coverage for the domain of health care. This study supports the utility of the ISO Reference Terminology Model for Nursing Diagnoses as a facilitator for the integration process. PMID:12668692

Semi-automated detection of anterior cruciate ligament injury from MRI.

PubMed

Štajduhar, Ivan; Mamula, Mihaela; Miletić, Damir; Ünal, Gözde

2017-03-01

A radiologist's work in detecting various injuries or pathologies from radiological scans can be tiresome, time consuming and prone to errors. The field of computer-aided diagnosis aims to reduce these factors by introducing a level of automation in the process. In this paper, we deal with the problem of detecting the presence of anterior cruciate ligament (ACL) injury in a human knee. We examine the possibility of aiding the diagnosis process by building a decision-support model for detecting the presence of milder ACL injuries (not requiring operative treatment) and complete ACL ruptures (requiring operative treatment) from sagittal plane magnetic resonance (MR) volumes of human knees. Histogram of oriented gradient (HOG) descriptors and gist descriptors are extracted from manually selected rectangular regions of interest enveloping the wider cruciate ligament area. Performance of two machine-learning models is explored, coupled with both feature extraction methods: support vector machine (SVM) and random forests model. Model generalisation properties were determined by performing multiple iterations of stratified 10-fold cross validation whilst observing the area under the curve (AUC) score. Sagittal plane knee joint MR data was retrospectively gathered at the Clinical Hospital Centre Rijeka, Croatia, from 2007 until 2014. Type of ACL injury was established in a double-blind fashion by comparing the retrospectively set diagnosis against the prospective opinion of another radiologist. After clean up, the resulting dataset consisted of 917 usable labelled exam sequences of left or right knees. Experimental results suggest that a linear-kernel SVM learned from HOG descriptors has the best generalisation properties among the experimental models compared, having an area under the curve of 0.894 for the injury-detection problem and 0.943 for the complete-rupture-detection problem. Although the problem of performing semi-automated ACL-injury diagnosis by observing knee-joint MR volumes alone is a difficult one, experimental results suggest potential clinical application of computer-aided decision making, both for detecting milder injuries and detecting complete ruptures. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Signal processing and neural network toolbox and its application to failure diagnosis and prognosis

NASA Astrophysics Data System (ADS)

Tu, Fang; Wen, Fang; Willett, Peter K.; Pattipati, Krishna R.; Jordan, Eric H.

2001-07-01

Many systems are comprised of components equipped with self-testing capability; however, if the system is complex involving feedback and the self-testing itself may occasionally be faulty, tracing faults to a single or multiple causes is difficult. Moreover, many sensors are incapable of reliable decision-making on their own. In such cases, a signal processing front-end that can match inference needs will be very helpful. The work is concerned with providing an object-oriented simulation environment for signal processing and neural network-based fault diagnosis and prognosis. In the toolbox, we implemented a wide range of spectral and statistical manipulation methods such as filters, harmonic analyzers, transient detectors, and multi-resolution decomposition to extract features for failure events from data collected by data sensors. Then we evaluated multiple learning paradigms for general classification, diagnosis and prognosis. The network models evaluated include Restricted Coulomb Energy (RCE) Neural Network, Learning Vector Quantization (LVQ), Decision Trees (C4.5), Fuzzy Adaptive Resonance Theory (FuzzyArtmap), Linear Discriminant Rule (LDR), Quadratic Discriminant Rule (QDR), Radial Basis Functions (RBF), Multiple Layer Perceptrons (MLP) and Single Layer Perceptrons (SLP). Validation techniques, such as N-fold cross-validation and bootstrap techniques, are employed for evaluating the robustness of network models. The trained networks are evaluated for their performance using test data on the basis of percent error rates obtained via cross-validation, time efficiency, generalization ability to unseen faults. Finally, the usage of neural networks for the prediction of residual life of turbine blades with thermal barrier coatings is described and the results are shown. The neural network toolbox has also been applied to fault diagnosis in mixed-signal circuits.

Presenting Symptoms of Women With Depression in an Obstetrics and Gynecology Setting

PubMed Central

Cerimele, Joseph M.; Vanderlip, Erik R.; Croicu, Carmen A.; Melville, Jennifer L.; Russo, Joan; Reed, Susan D.; Katon, Wayne

2014-01-01

OBJECTIVE To describe the presenting symptoms of women with depression in two obstetrics and gynecology clinics, determine depression diagnosis frequency, and examine factors associated with depression diagnosis. METHODS Data were extracted from charts of women screening positive for depression in a clinical trial testing a collaborative care depression intervention. Bivariate and multivariable analyses examined patient factors associated with the diagnosis of depression by an obstetrician–gynecologist (ob-gyn). RESULTS Eleven percent of women with depression presented with a psychologic chief complaint but another 30% mentioned psychologic distress. All others noted physical symptoms only or presented for preventive care. Ob-gyns did not identify 60% of women with a depression diagnosis. Depression severity was similar in women who were or were not diagnosed by their ob-gyns. Bivariate analyses showed four factors significantly associated with depression diagnosis: reporting a psychologic symptom as the chief complaint or associated symptom (72% compared with 18.6%, P<.001), younger age (35.5 years compared with 40.8 years, P<.005), being within 12 months postpartum (13.9% compared with 2.8%, P<.005), and a primary care-oriented visit (72% compared with 30%, P<.001). Multivariable analysis showed that reporting a psychologic symptom (adjusted odds ratio [OR] 8.90, 95% confidence interval [CI] 4.15–19.10, P<.001), a primary care oriented visit (adjusted OR 2.46, 95% CI 1.14–5.29, P=.03), and each year of increasing age (adjusted OR 0.96, 95% CI 0.93–0.96, P=.02) were significantly associated with a depression diagnosis. CONCLUSION The majority of women with depression presented with physical symptoms; most women with depression were not diagnosed by their ob-gyn, and depression severity was similar in those diagnosed and those not diagnosed. PMID:23969800

Effect of resonant magnetic perturbations on three dimensional equilibria in the Madison Symmetric Torus reversed-field pinch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Munaretto, S., E-mail: smunaretto@wisc.edu; Chapman, B. E.; Nornberg, M. D.

2016-05-15

The orientation of 3D equilibria in the Madison Symmetric Torus (MST) [R. N. Dexter et al., Fusion Technol. 19, 131 (1991)] reversed-field pinch can now be controlled with a resonant magnetic perturbation (RMP). Absent the RMP, the orientation of the stationary 3D equilibrium varies from shot to shot in a semi-random manner, making its diagnosis difficult. Produced with a poloidal array of saddle coils at the vertical insulated cut in MST's thick conducting shell, an m = 1 RMP with an amplitude b{sub r}/B ∼ 10% forces the 3D structure into any desired orientation relative to MST's diagnostics. This control has led to improvedmore » diagnosis, revealing enhancements in both the central electron temperature and density. With sufficient amplitude, the RMP also inhibits the generation of high-energy (>20 keV) electrons, which otherwise emerge due to a reduction in magnetic stochasticity in the core. Field line tracing reveals that the RMP reintroduces stochasticity to the core. A m = 3 RMP of similar amplitude has little effect on the magnetic topology or the high-energy electrons.« less

A characterization of Parkinson's disease by describing the visual field motion during gait

NASA Astrophysics Data System (ADS)

Trujillo, David; Martínez, Fabio; Atehortúa, Angélica; Alvarez, Charlens; Romero, Eduardo

2015-12-01

An early diagnosis of Parkinson's Disease (PD) is crucial towards devising successful rehabilitation programs. Typically, the PD diagnosis is performed by characterizing typical symptoms, namely bradykinesia, rigidity, tremor, postural instability or freezing gait. However, traditional examination tests are usually incapable of detecting slight motor changes, specially for early stages of the pathology. Recently, eye movement abnormalities have correlated with early onset of some neurodegenerative disorders. This work introduces a new characterization of the Parkinson disease by describing the ocular motion during a common daily activity as the gait. This paper proposes a fully automatic eye motion analysis using a dense optical flow that tracks the ocular direction. The eye motion is then summarized using orientation histograms constructed during a whole gait cycle. The proposed approach was evaluated by measuring the χ2 distance between the orientation histograms, showing substantial differences between control and PD patients.

Anatomy and histology of the sacroiliac joints.

PubMed

Egund, Niels; Jurik, Anne Grethe

2014-07-01

The anatomy of joints provides an important basis for understanding the nature and imaging of pathologic lesions and their imaging appearance. This applies especially to the sacroiliac (SI) joints, which play a major role in the diagnosis of spondyloarthritis. They are composed of two different joint portions, a cartilage-covered portion ventrally and a ligamentous portion dorsally, and thus rather complex anatomically. Knowledge of anatomy and the corresponding normal imaging findings are important in the imaging diagnosis of sacroiliitis, especially by MR imaging. A certain distinction between the two joint portions by MR imaging is only obtainable by axial slice orientation. Together with a perpendicular coronal slice orientation, it provides adequate anatomical information and thereby a possibility for detecting the anatomical site of disease-specific characteristics and normal variants simulating disease. This overview describes current knowledge about the normal macroscopic and microscopic anatomy of the SI joints. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Texture feature extraction based on a uniformity estimation method for local brightness and structure in chest CT images.

PubMed

Peng, Shao-Hu; Kim, Deok-Hwan; Lee, Seok-Lyong; Lim, Myung-Kwan

2010-01-01

Texture feature is one of most important feature analysis methods in the computer-aided diagnosis (CAD) systems for disease diagnosis. In this paper, we propose a Uniformity Estimation Method (UEM) for local brightness and structure to detect the pathological change in the chest CT images. Based on the characteristics of the chest CT images, we extract texture features by proposing an extension of rotation invariant LBP (ELBP(riu4)) and the gradient orientation difference so as to represent a uniform pattern of the brightness and structure in the image. The utilization of the ELBP(riu4) and the gradient orientation difference allows us to extract rotation invariant texture features in multiple directions. Beyond this, we propose to employ the integral image technique to speed up the texture feature computation of the spatial gray level dependent method (SGLDM). Copyright © 2010 Elsevier Ltd. All rights reserved.

An object-oriented description method of EPMM process

NASA Astrophysics Data System (ADS)

Jiang, Zuo; Yang, Fan

2017-06-01

In order to use the object-oriented mature tools and language in software process model, make the software process model more accord with the industrial standard, it’s necessary to study the object-oriented modelling of software process. Based on the formal process definition in EPMM, considering the characteristics that Petri net is mainly formal modelling tool and combining the Petri net modelling with the object-oriented modelling idea, this paper provides this implementation method to convert EPMM based on Petri net into object models based on object-oriented description.

Stacked thin layers of metaphase chromatin explain the geometry of chromosome rearrangements and banding.

PubMed

Daban, Joan-Ramon

2015-10-08

The three-dimensional organization of tightly condensed chromatin within metaphase chromosomes has been one of the most challenging problems in structural biology since the discovery of the nucleosome. This study shows that chromosome images obtained from typical banded karyotypes and from different multicolour cytogenetic analyses can be used to gain information about the internal structure of chromosomes. Chromatin bands and the connection surfaces in sister chromatid exchanges and in cancer translocations are planar and orthogonal to the chromosome axis. Chromosome stretching produces band splitting and even the thinnest bands are orthogonal and well defined, indicating that short stretches of DNA can occupy completely the chromosome cross-section. These observations impose strong physical constraints on models that attempt to explain chromatin folding in chromosomes. The thin-plate model, which consists of many stacked layers of planar chromatin perpendicular to the chromosome axis, is compatible with the observed orientation of bands, with the existence of thin bands, and with band splitting; it is also compatible with the orthogonal orientation and planar geometry of the connection surfaces in chromosome rearrangements. The results obtained provide a consistent interpretation of the chromosome structural properties that are used in clinical cytogenetics for the diagnosis of hereditary diseases and cancers.

Cloud-Based NoSQL Open Database of Pulmonary Nodules for Computer-Aided Lung Cancer Diagnosis and Reproducible Research.

PubMed

Ferreira Junior, José Raniery; Oliveira, Marcelo Costa; de Azevedo-Marques, Paulo Mazzoncini

2016-12-01

Lung cancer is the leading cause of cancer-related deaths in the world, and its main manifestation is pulmonary nodules. Detection and classification of pulmonary nodules are challenging tasks that must be done by qualified specialists, but image interpretation errors make those tasks difficult. In order to aid radiologists on those hard tasks, it is important to integrate the computer-based tools with the lesion detection, pathology diagnosis, and image interpretation processes. However, computer-aided diagnosis research faces the problem of not having enough shared medical reference data for the development, testing, and evaluation of computational methods for diagnosis. In order to minimize this problem, this paper presents a public nonrelational document-oriented cloud-based database of pulmonary nodules characterized by 3D texture attributes, identified by experienced radiologists and classified in nine different subjective characteristics by the same specialists. Our goal with the development of this database is to improve computer-aided lung cancer diagnosis and pulmonary nodule detection and classification research through the deployment of this database in a cloud Database as a Service framework. Pulmonary nodule data was provided by the Lung Image Database Consortium and Image Database Resource Initiative (LIDC-IDRI), image descriptors were acquired by a volumetric texture analysis, and database schema was developed using a document-oriented Not only Structured Query Language (NoSQL) approach. The proposed database is now with 379 exams, 838 nodules, and 8237 images, 4029 of them are CT scans and 4208 manually segmented nodules, and it is allocated in a MongoDB instance on a cloud infrastructure.

[Vulvar plethysmographic findings in transsexual women].

PubMed

Tichý, P

1994-05-02

Transsexualism is a complicated diagnostic category. From the differential diagnostic aspect it is necessary, among others, to rule out homosexuality. The objective of the present work was to express objectively vulvo-plethysmographic reactions in transsexual women and to assess whether (or how) these reactions differ from findings in women with a homosexual orientation and to evaluate subsequently possibilities of vulvo-plethysmography in the differential diagnosis of homosexuality and transsexualism. Using an electro-capacitance vulvo-plethysmographic apparatus (designed by Figar et al.), 25 women (mean age 27.6 years, range 18-39 years) with an inverse sexual orientation--transsexuals--were examined. The results were compared with a group of 50 women, matched for age, who reported a homosexual orientation. On evaluation of the total number of recorded positive reactions to heterosexual and homosexual categories of exposed erotic stimuli the difference between the two groups on projection of 3 from 4 categories of these stimuli was highly significant (p < 0.001, chi 2 test). The differences were revealed in particular when evaluating preferences of pictures of sexual activities of partners. While in homosexually oriented women, as expected, preference of homosexual activities was recorded (74%) or a not clear-cut differentiation of these stimuli (26%), in 88% of transsexual women there was a more or less markedly expressed preference of heterosexual activities. Significant differences were found in results of vulvo-plethysmographic examinations of transsexual and homosexual women. This confirmed the expedience of using electro-capacitance vulvo-plethysmography for the differential diagnosis of homosexual and transsexual women.

Generalizable items of quantitative and qualitative cornerstones for personnel requirement of physicians in anesthesia

PubMed Central

Weiss, Manfred; Rossaint, Rolf; Iber, Thomas

2017-01-01

Anesthesiologists perform a broad spectrum of tasks. However, in many countries, there is no legal basis for personnel staffing of physicians in anesthesia. Also, the German diagnosis related groups system for refunding does not deliver such a basis. Thus, in 2006 a new calculation base for the personnel requirement that included an Excel calculation sheet was introduced by the German Board of Anesthesiologists (BDA) and the German Society of Anesthesiology and Intensive Care Medicine (DGAI), and updated in 2009 and 2015. Oriented primarily to organizational needs, in 2015, BDA/DGAI defined quantitative and qualitative cornerstones for personnel requirement of physicians in anesthesia, especially reflecting recent laws governing physician’s working conditions and competence in the field of anesthesia, as well as demands of strengthened legal rights of patients, patient care and safety. We present a workload-oriented model, integrating core working hours, shift work or standby duty, quality of care, efficiency of processes, legal, educational, controlling, local, organizational and economic aspects for calculating personnel demands. Auxiliary tables enable physicians to calculate personnel demands due to differing employee workload, non-patient oriented tasks and reimbursement of full-equivalents due to parental leave, prohibition of employment, or long-term illness. After 10 years of experience with the first calculation tool, we report the generalizable key aspects and items of a necessary calculation tool which may help physicians to justify realistic workload-oriented personnel staffing demands in anesthesia. A modular, flexible nature of a calculation tool should allow adaption to the respective legal and organizational demands of different countries. PMID:28529910

Outcome evaluation of a new model of critical care orientation.

PubMed

Morris, Linda L; Pfeifer, Pamela; Catalano, Rene; Fortney, Robert; Nelson, Greta; Rabito, Robb; Harap, Rebecca

2009-05-01

The shortage of critical care nurses and the service expansion of 2 intensive care units provided a unique opportunity to create a new model of critical care orientation. The goal was to design a program that assessed critical thinking, validated competence, and provided learning pathways that accommodated diverse experience. To determine the effect of a new model of critical care orientation on satisfaction, retention, turnover, vacancy, preparedness to manage patient care assignment, length of orientation, and cost of orientation. A prospective, quasi-experimental design with both quantitative and qualitative methods. The new model improved satisfaction scores, retention rates, and recruitment of critical care nurses. Length of orientation was unchanged. Cost was increased, primarily because a full-time education consultant was added. A new model for nurse orientation that was focused on critical thinking and competence validation improved retention and satisfaction and serves as a template for orientation of nurses throughout the medical center.

Second-order oriented partial-differential equations for denoising in electronic-speckle-pattern interferometry fringes.

PubMed

Tang, Chen; Han, Lin; Ren, Hongwei; Zhou, Dongjian; Chang, Yiming; Wang, Xiaohang; Cui, Xiaolong

2008-10-01

We derive the second-order oriented partial-differential equations (PDEs) for denoising in electronic-speckle-pattern interferometry fringe patterns from two points of view. The first is based on variational methods, and the second is based on controlling diffusion direction. Our oriented PDE models make the diffusion along only the fringe orientation. The main advantage of our filtering method, based on oriented PDE models, is that it is very easy to implement compared with the published filtering methods along the fringe orientation. We demonstrate the performance of our oriented PDE models via application to two computer-simulated and experimentally obtained speckle fringes and compare with related PDE models.

MEDRIS: The Problem Oriented Electronic Medical Record in Medical Education

PubMed Central

Rifat, Sami F.; Robert, Shanthi; Trace, David; Prakash, Sanjeev; Naeymi-Rad, Frank; Barnett, David; Pannicia, Gregory; Hammergren, David; Carmony, Lowell; Evens, Martha

1990-01-01

MEDRIS (The Medical Record Interface System) is an object oriented HyperCard interface designed to help physicians enter patient information as comfortably and naturally as possible. It can function as a stand alone system producing its own reports or serve as an interface to a medical expert system (e.g., MEDAS). MEDRIS plays an important role in the clinical education of medical students at the Chicago Medical School. MEDRIS portrays an intuitive, graphically oriented system that will provide a learning environment for the problem oriented medical record (POMR) that forms the basis of the structure of the history and physical exam. The enthusiasm shown by the medical students for this project has garnered support for including MEDRIS in the curriculum of the Introduction to Clinical Medicine course this semester. MEDRIS, developed using HyperCard, can be used as a tool not only for teaching POMR and physical diagnosis, but also computer literacy.

Requirements Modeling with the Aspect-oriented User Requirements Notation (AoURN): A Case Study

NASA Astrophysics Data System (ADS)

Mussbacher, Gunter; Amyot, Daniel; Araújo, João; Moreira, Ana

The User Requirements Notation (URN) is a recent ITU-T standard that supports requirements engineering activities. The Aspect-oriented URN (AoURN) adds aspect-oriented concepts to URN, creating a unified framework that allows for scenario-based, goal-oriented, and aspect-oriented modeling. AoURN is applied to the car crash crisis management system (CCCMS), modeling its functional and non-functional requirements (NFRs). AoURN generally models all use cases, NFRs, and stakeholders as individual concerns and provides general guidelines for concern identification. AoURN handles interactions between concerns, capturing their dependencies and conflicts as well as the resolutions. We present a qualitative comparison of aspect-oriented techniques for scenario-based and goal-oriented requirements engineering. An evaluation carried out based on the metrics adapted from literature and a task-based evaluation suggest that AoURN models are more scalable than URN models and exhibit better modularity, reusability, and maintainability.

[Process-oriented cost calculation in interventional radiology. A case study].

PubMed

Mahnken, A H; Bruners, P; Günther, R W; Rasche, C

2012-01-01

Currently used costing methods such as cost centre accounting do not sufficiently reflect the process-based resource utilization in medicine. The goal of this study was to establish a process-oriented cost assessment of percutaneous radiofrequency (RF) ablation of liver and lung metastases. In each of 15 patients a detailed task analysis of the primary process of hepatic and pulmonary RF ablation was performed. Based on these data a dedicated cost calculation model was developed for each primary process. The costs of each process were computed and compared with the revenue for in-patients according to the German diagnosis-related groups (DRG) system 2010. The RF ablation of liver metastases in patients without relevant comorbidities and a low patient complexity level results in a loss of EUR 588.44, whereas the treatment of patients with a higher complexity level yields an acceptable profit. The treatment of pulmonary metastases is profitable even in cases of additional expenses due to complications. Process-oriented costing provides relevant information that is needed for understanding the economic impact of treatment decisions. It is well suited as a starting point for economically driven process optimization and reengineering. Under the terms of the German DRG 2010 system percutaneous RF ablation of lung metastases is economically reasonable, while RF ablation of liver metastases in cases of low patient complexity levels does not cover the costs.

Object oriented fault diagnosis system for space shuttle main engine redlines

NASA Technical Reports Server (NTRS)

Rogers, John S.; Mohapatra, Saroj Kumar

1990-01-01

A great deal of attention has recently been given to Artificial Intelligence research in the area of computer aided diagnostics. Due to the dynamic and complex nature of space shuttle red-line parameters, a research effort is under way to develop a real time diagnostic tool that will employ historical and engineering rulebases as well as a sensor validity checking. The capability of AI software development tools (KEE and G2) will be explored by applying object oriented programming techniques in accomplishing the diagnostic evaluation.

Automatic anatomical structures location based on dynamic shape measurement

NASA Astrophysics Data System (ADS)

Witkowski, Marcin; Rapp, Walter; Sitnik, Robert; Kujawinska, Malgorzata; Vander Sloten, Jos; Haex, Bart; Bogaert, Nico; Heitmann, Kjell

2005-09-01

New image processing methods and active photonics apparatus have made possible the development of relatively inexpensive optical systems for complex shape and object measurements. We present dynamic 360° scanning method for analysis of human lower body biomechanics, with an emphasis on the analysis of the knee joint. The anatomical structure (of high medical interest) that is possible to scan and analyze, is patella. Tracking of patella position and orientation under dynamic conditions may lead to detect pathological patella movements and help in knee joint disease diagnosis. The processed data is obtained from a dynamic laser triangulation surface measurement system, able to capture slow to normal movements with a scan frequency between 15 and 30 Hz. These frequency rates are enough to capture controlled movements used e.g. for medical examination purposes. The purpose of the work presented is to develop surface analysis methods that may be used as support of diagnosis of motoric abilities of lower limbs. The paper presents algorithms used to process acquired lower limbs surface data in order to find the position and orientation of patella. The algorithms implemented include input data preparation, curvature description methods, knee region discrimination and patella assumed position/orientation calculation. Additionally, a method of 4D (3D + time) medical data visualization is proposed. Also some exemplary results are presented.

The bubbles or the boiling pot? An ecosystemic approach to culture, environment and quality of life

NASA Astrophysics Data System (ADS)

Pilon, André Francisco

2009-03-01

For the diagnosis and prognosis of the problems of quality of life, a multidisciplinary ecosystemic approach encompasses four dimensions of being-in-the-world, as donors and recipients: intimate, interactive, social and biophysical. Social, cultural and environmental vulnerabilities are understood and dealt with, in different circumstances of space and time, as the conjugated effect of all dimensions of being-in-the-world, as they induce the events (deficits and assets), cope with consequences (desired or undesired) and contribute for change. Instead of fragmented and reduced representations of reality, diagnosis and prognosis of cultural, educational, environmental and health problems considers the connections (assets) and ruptures (deficits) between the different dimensions, providing a planning model to develop and evaluate research, teaching programmes, public policies and field projects. The methodology is participatory, experiential and reflexive; heuristic-hermeneutic processes unveil cultural and epistemic paradigms that orient subject-object relationships; giving people the opportunity to reflect on their own realities, engage in new experiences and find new ways to live better in a better world. The proposal is a creative model for thought and practice, providing many opportunities for discussion, debate and development of holistic projects integrating different scientific domains (social sciences, psychology, education, philosophy, etc.).

[A computer-aided image diagnosis and study system].

PubMed

Li, Zhangyong; Xie, Zhengxiang

2004-08-01

The revolution in information processing, particularly the digitizing of medicine, has changed the medical study, work and management. This paper reports a method to design a system for computer-aided image diagnosis and study. Combined with some good idea of graph-text system and picture archives communicate system (PACS), the system was realized and used for "prescription through computer", "managing images" and "reading images under computer and helping the diagnosis". Also typical examples were constructed in a database and used to teach the beginners. The system was developed by the visual developing tools based on object oriented programming (OOP) and was carried into operation on the Windows 9X platform. The system possesses friendly man-machine interface.

Action versus Result-Oriented Schemes in a Grassland Agroecosystem: A Dynamic Modelling Approach

PubMed Central

Sabatier, Rodolphe; Doyen, Luc; Tichit, Muriel

2012-01-01

Effects of agri-environment schemes (AES) on biodiversity remain controversial. While most AES are action-oriented, result-oriented and habitat-oriented schemes have recently been proposed as a solution to improve AES efficiency. The objective of this study was to compare action-oriented, habitat-oriented and result-oriented schemes in terms of ecological and productive performance as well as in terms of management flexibility. We developed a dynamic modelling approach based on the viable control framework to carry out a long term assessment of the three schemes in a grassland agroecosystem. The model explicitly links grazed grassland dynamics to bird population dynamics. It is applied to lapwing conservation in wet grasslands in France. We ran the model to assess the three AES scenarios. The model revealed the grazing strategies respecting ecological and productive constraints specific to each scheme. Grazing strategies were assessed by both their ecological and productive performance. The viable control approach made it possible to obtain the whole set of viable grazing strategies and therefore to quantify the management flexibility of the grassland agroecosystem. Our results showed that habitat and result-oriented scenarios led to much higher ecological performance than the action-oriented one. Differences in both ecological and productive performance between the habitat and result-oriented scenarios were limited. Flexibility of the grassland agroecosystem in the result-oriented scenario was much higher than in that of habitat-oriented scenario. Our model confirms the higher flexibility as well as the better ecological and productive performance of result-oriented schemes. A larger use of result-oriented schemes in conservation may also allow farmers to adapt their management to local conditions and to climatic variations. PMID:22496746

The Biopsychosocial Model 25 Years Later: Principles, Practice, and Scientific Inquiry

PubMed Central

Borrell-Carrió, Francesc; Suchman, Anthony L.; Epstein, Ronald M.

2004-01-01

The biopsychosocial model is both a philosophy of clinical care and a practical clinical guide. Philosophically, it is a way of understanding how suffering, disease, and illness are affected by multiple levels of organization, from the societal to the molecular. At the practical level, it is a way of understanding the patient’s subjective experience as an essential contributor to accurate diagnosis, health outcomes, and humane care. In this article, we defend the biopsychosocial model as a necessary contribution to the scientific clinical method, while suggesting 3 clarifications: (1) the relationship between mental and physical aspects of health is complex—subjective experience depends on but is not reducible to laws of physiology; (2) models of circular causality must be tempered by linear approximations when considering treatment options; and (3) promoting a more participatory clinician-patient relationship is in keeping with current Western cultural tendencies, but may not be universally accepted. We propose a biopsychosocial-oriented clinical practice whose pillars include (1) self-awareness; (2) active cultivation of trust; (3) an emotional style characterized by empathic curiosity; (4) self-calibration as a way to reduce bias; (5) educating the emotions to assist with diagnosis and forming therapeutic relationships; (6) using informed intuition; and (7) communicating clinical evidence to foster dialogue, not just the mechanical application of protocol. In conclusion, the value of the biopsychosocial model has not been in the discovery of new scientific laws, as the term “new paradigm” would suggest, but rather in guiding parsimonious application of medical knowledge to the needs of each patient. PMID:15576544

Validation of the Sexual Orientation Microaggression Inventory In Two Diverse Samples of LGBTQ Youth

PubMed Central

Swann, Gregory; Minshew, Reese; Newcomb, Michael E.; Mustanski, Brian

2016-01-01

Critical race theory asserts that microaggressions, or low-level, covert acts of aggression, are commonplace in the lives of people of color. These theorists also assert a taxonomy of microaggressions, which includes “microassaults,” “microinsults,” and “microinvalidations.” The theory of microaggressions has been adopted by researchers of LGBTQ communities. This study investigated the three-factor taxonomy as it relates to a diverse sample of LGBTQ youth using the newly developed Sexual Orientation Microaggression Inventory (SOMI). Exploratory factor analysis was used to determine the number of factors that exist in SOMI in a sample of 206 LGBTQ-identifying youth. Follow up confirmatory factor analyses (CFAs) were conducted in order to compare single factor, unrestricted four factor, second order, and bi-factor models in a separate sample of 363 young men who have sex with men. The best fitting model was used to predict victimization, depressive symptoms, and depression diagnosis in order to test validity. The best fitting model was a bi-factor model utilizing 19 of the original 26 items with a general factor and four specific factors representing anti-gay attitudes (“microinsults”), denial of homosexuality, heterosexism (“microinvalidations”), and societal disapproval (“microassaults”). Reliability analyses found that the majority of reliable variance was accounted for by the general factor. The general factor was a significant predictor of victimization and depressive symptoms, as well as unrelated to social desirability, suggesting convergent, criterion-related, and discriminant validity. SOMI emerged as a scale with evidence of validity for assessing exposure to microaggressions in a diverse sample of LGBTQ youth. PMID:27067241

Validation of the Sexual Orientation Microaggression Inventory in Two Diverse Samples of LGBTQ Youth.

PubMed

Swann, Gregory; Minshew, Reese; Newcomb, Michael E; Mustanski, Brian

2016-08-01

Critical race theory asserts that microaggressions, or low-level, covert acts of aggression, are commonplace in the lives of people of color. These theorists also assert a taxonomy of microaggressions, which includes "microassaults," "microinsults," and "microinvalidations". The theory of microaggressions has been adopted by researchers of LGBTQ communities. This study investigated the three-factor taxonomy as it relates to a diverse sample of LGBTQ youth using the newly developed Sexual Orientation Microaggression Inventory (SOMI). Exploratory factor analysis was used to determine the number of factors that exist in SOMI in a sample of 206 LGBTQ-identifying youth. Follow up confirmatory factor analyses were conducted in order to compare single-factor, unrestricted four-factor, second-order, and bi-factor models in a separate sample of 363 young men who have sex with men. The best fitting model was used to predict victimization, depressive symptoms, and depression diagnosis in order to test validity. The best fitting model was a bi-factor model utilizing 19 of the original 26 items with a general factor and four specific factors representing anti-gay attitudes ("microinsults"), denial of homosexuality, heterosexism ("microinvalidations"), and societal disapproval ("microassaults"). Reliability analyses found that the majority of reliable variance was accounted for by the general factor. The general factor was a significant predictor of victimization and depressive symptoms, as well as unrelated to social desirability, suggesting convergent, criterion-related, and discriminant validity. SOMI emerged as a scale with evidence of validity for assessing exposure to microaggressions in a diverse sample of LGBTQ youth.

Modification of the Integrated Sasang Constitutional Diagnostic Model

PubMed Central

Nam, Jiho

2017-01-01

In 2012, the Korea Institute of Oriental Medicine proposed an objective and comprehensive physical diagnostic model to address quantification problems in the existing Sasang constitutional diagnostic method. However, certain issues have been raised regarding a revision of the proposed diagnostic model. In this paper, we propose various methodological approaches to address the problems of the previous diagnostic model. Firstly, more useful variables are selected in each component. Secondly, the least absolute shrinkage and selection operator is used to reduce multicollinearity without the modification of explanatory variables. Thirdly, proportions of SC types and age are considered to construct individual diagnostic models and classify the training set and the test set for reflecting the characteristics of the entire dataset. Finally, an integrated model is constructed with explanatory variables of individual diagnosis models. The proposed integrated diagnostic model significantly improves the sensitivities for both the male SY type (36.4% → 62.0%) and the female SE type (43.7% → 64.5%), which were areas of limitation of the previous integrated diagnostic model. The ideas of these new algorithms are expected to contribute not only to the scientific development of Sasang constitutional medicine in Korea but also to that of other diagnostic methods for traditional medicine. PMID:29317897

Somatosensory attention identifies both overt and covert awareness in disorders of consciousness.

PubMed

Gibson, Raechelle M; Chennu, Srivas; Fernández-Espejo, Davinia; Naci, Lorina; Owen, Adrian M; Cruse, Damian

2016-09-01

Some patients diagnosed with disorders of consciousness retain sensory and cognitive abilities beyond those apparent from their overt behavior. Characterizing these covert abilities is crucial for diagnosis, prognosis, and medical ethics. This multimodal study investigates the relationship between electroencephalographic evidence for perceptual/cognitive preservation and both overt and covert markers of awareness. Fourteen patients with severe brain injuries were evaluated with an electroencephalographic vibrotactile attention task designed to identify a hierarchy of residual somatosensory and cognitive abilities: (1) somatosensory steady-state evoked responses, (2) bottom-up attention orienting (P3a event-related potential), and (3) top-down attention (P3b event-related potential). Each patient was also assessed with a clinical behavioral scale and 2 functional magnetic resonance imaging assessments of covert command following. Six patients produced only sensory responses, with no evidence of cognitive event-related potentials. A further 8 patients demonstrated reliable bottom-up attention-orienting responses (P3a). No patient showed evidence of top-down attention (P3b). Only those patients who followed commands, whether overtly with behavior or covertly with functional neuroimaging, also demonstrated event-related potential evidence of attentional orienting. Somatosensory attention-orienting event-related potentials differentiated patients who could follow commands from those who could not. Crucially, this differentiation was irrespective of whether command following was evident through overt external behavior, or through covert functional neuroimaging methods. Bedside electroencephalographic methods may corroborate more expensive and challenging methods such as functional neuroimaging, and thereby assist in the accurate diagnosis of awareness. Ann Neurol 2016;80:412-423. © 2016 American Neurological Association.

Anisotropic shear dispersion parameterization for ocean eddy transport

NASA Astrophysics Data System (ADS)

Reckinger, Scott; Fox-Kemper, Baylor

2015-11-01

The effects of mesoscale eddies are universally treated isotropically in global ocean general circulation models. However, observations and simulations demonstrate that the mesoscale processes that the parameterization is intended to represent, such as shear dispersion, are typified by strong anisotropy. We extend the Gent-McWilliams/Redi mesoscale eddy parameterization to include anisotropy and test the effects of varying levels of anisotropy in 1-degree Community Earth System Model (CESM) simulations. Anisotropy has many effects on the simulated climate, including a reduction of temperature and salinity biases, a deepening of the southern ocean mixed-layer depth, impacts on the meridional overturning circulation and ocean energy and tracer uptake, and improved ventilation of biogeochemical tracers, particularly in oxygen minimum zones. A process-based parameterization to approximate the effects of unresolved shear dispersion is also used to set the strength and direction of anisotropy. The shear dispersion parameterization is similar to drifter observations in spatial distribution of diffusivity and high-resolution model diagnosis in the distribution of eddy flux orientation.

Estimating cardiac fiber orientations in pig hearts using registered ultrasound and MR image volumes

NASA Astrophysics Data System (ADS)

Dormer, James D.; Meng, Yuguang; Zhang, Xiaodong; Jiang, Rong; Wagner, Mary B.; Fei, Baowei

2017-03-01

Heart fiber mechanics can be important predictors in current and future cardiac function. Accurate knowledge of these mechanics could enable cardiologists to provide a diagnosis before conditions progress. Magnetic resonance diffusion tensor imaging (MR-DTI) has been used to determine cardiac fiber orientations. Ultrasound is capable of providing anatomical information in real time, enabling a physician to quickly adjust parameters to optimize image scans. If known fiber orientations from a template heart measured using DTI can be accurately deformed onto a cardiac ultrasound volume, fiber orientations could be estimated for the patient without the need for a costly MR scan while still providing cardiologists valuable information about the heart mechanics. In this study, we apply the method to pig hearts, which are a close representation of human heart anatomy. Experiments from pig hearts show that the registration method achieved an average Dice similarity coefficient (DSC) of 0.819 +/- 0.050 between the ultrasound and deformed MR volumes and that the proposed ultrasound-based method is able to estimate the cardiac fiber orientation in pig hearts.

The effect of collagen fibril orientation on the biphasic mechanics of articular cartilage.

PubMed

Meng, Qingen; An, Shuqiang; Damion, Robin A; Jin, Zhongmin; Wilcox, Ruth; Fisher, John; Jones, Alison

2017-01-01

The highly inhomogeneous distribution of collagen fibrils may have important effects on the biphasic mechanics of articular cartilage. However, the effect of the inhomogeneity of collagen fibrils has mainly been investigated using simplified three-layered models, which may have underestimated the effect of collagen fibrils by neglecting their realistic orientation. The aim of this study was to investigate the effect of the realistic orientation of collagen fibrils on the biphasic mechanics of articular cartilage. Five biphasic material models, each of which included a different level of complexity of fibril reinforcement, were solved using two different finite element software packages (Abaqus and FEBio). Model 1 considered the realistic orientation of fibrils, which was derived from diffusion tensor magnetic resonance images. The simplified three-layered orientation was used for Model 2. Models 3-5 were three control models. The realistic collagen orientations obtained in this study were consistent with the literature. Results from the two finite element implementations were in agreement for each of the conditions modelled. The comparison between the control models confirmed some functions of collagen fibrils. The comparison between Models 1 and 2 showed that the widely-used three-layered inhomogeneous model can produce similar fluid load support to the model including the realistic fibril orientation; however, an accurate prediction of the other mechanical parameters requires the inclusion of the realistic orientation of collagen fibrils. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Death Orientation and Communication with the Terminally Ill.

ERIC Educational Resources Information Center

Eggerman, Sinda; Dustin, Dick

1986-01-01

Examined relationship betwen attitude toward death and the terminal patient and communication with terminally ill in 103 medical students and 15 family physicians. Relationships were found between indices (Terminal Illness Questionnaire, Threat Index) and factors used in determining whether to reveal a terminal diagnosis. (Author/NRB)

Semantic extraction and processing of medical records for patient-oriented visual index

NASA Astrophysics Data System (ADS)

Zheng, Weilin; Dong, Wenjie; Chen, Xiangjiao; Zhang, Jianguo

2012-02-01

To have comprehensive and completed understanding healthcare status of a patient, doctors need to search patient medical records from different healthcare information systems, such as PACS, RIS, HIS, USIS, as a reference of diagnosis and treatment decisions for the patient. However, it is time-consuming and tedious to do these procedures. In order to solve this kind of problems, we developed a patient-oriented visual index system (VIS) to use the visual technology to show health status and to retrieve the patients' examination information stored in each system with a 3D human model. In this presentation, we present a new approach about how to extract the semantic and characteristic information from the medical record systems such as RIS/USIS to create the 3D Visual Index. This approach includes following steps: (1) Building a medical characteristic semantic knowledge base; (2) Developing natural language processing (NLP) engine to perform semantic analysis and logical judgment on text-based medical records; (3) Applying the knowledge base and NLP engine on medical records to extract medical characteristics (e.g., the positive focus information), and then mapping extracted information to related organ/parts of 3D human model to create the visual index. We performed the testing procedures on 559 samples of radiological reports which include 853 focuses, and achieved 828 focuses' information. The successful rate of focus extraction is about 97.1%.

Processing-microstructure relationships in thermotropic liquid crystalline polymers: Experimental and numerical modeling studies

NASA Astrophysics Data System (ADS)

Fang, Jun

Thermotropic liquid crystalline polymers (TLCPs) are a class of promising engineering materials for high-demanding structural applications. Their excellent mechanical properties are highly correlated to the underlying molecular orientation states, which may be affected by complex flow fields during melt processing. Thus, understanding and eventually predicting how processing flows impact molecular orientation is a critical step towards rational design work in order to achieve favorable, balanced physical properties in finished products. This thesis aims to develop deeper understanding of orientation development in commercial TLCPs during processing by coordinating extensive experimental measurements with numerical computations. In situ measurements of orientation development of LCPs during processing are a focal point of this thesis. An x-ray capable injection molding apparatus is enhanced and utilized for time-resolved measurements of orientation development in multiple commercial TLCPs during injection molding. Ex situ wide angle x-ray scattering is also employed for more thorough characterization of molecular orientation distributions in molded plaques. Incompletely injection molded plaques ("short shots") are studied to gain further insights into the intermediate orientation states during mold filling. Finally, two surface orientation characterization techniques, near edge x-ray absorption fine structure (NEXAFS) and infrared attenuated total reflectance (FTIR-ATR) are combined to investigate the surface orientation distribution of injection molded plaques. Surface orientation states are found to be vastly different from their bulk counterparts due to different kinematics involved in mold filling. In general, complex distributions of orientation in molded plaques reflect the spatially varying competition between shear and extension during mold filling. To complement these experimental measurements, numerical calculations based on the Larson-Doi polydomain model are performed. The implementation of the Larson-Doi in complex processing flows is performed using a commercial process modeling software suite (MOLDFLOWRTM), exploiting a nearly exact analogy between the Larson-Doi model and a fiber orientation model that has been widely used in composites processing simulations. The modeling scheme is first verified by predicting many qualitative and quantitative features of molecular orientation distributions in isothermal extrusion-fed channel flows. In coordination with experiments, the model predictions are found to capture many qualitative features observed in injection molded plaques (including short shots). The final, stringent test of Larson-Doi model performance is prediction of in situ transient orientation data collected during mold filling. The model yields satisfactory results, though certain numerical approximations limit performance near the mold front.

Common and specific impairments in attention functioning in girls with chromosome 22q11.2 deletion, fragile X or Turner syndromes

PubMed Central

2014-01-01

Background Chromosome 22q11.2 deletion syndrome (22q11.2DS), fragile X syndrome (FXS), and Turner syndrome (TS) are complex and variable developmental syndromes caused by different genetic abnormalities; yet, they share similar cognitive impairments in the domains of numbers, space, and time. The atypical development of foundational neural networks that underpin the attentional system is thought to result in further impairments in higher-order cognitive functions. The current study investigates whether children with similar higher-order cognitive impairments but different genetic disorders also show similar impairments in alerting, orienting, and executive control of attention. Methods Girls with 22q11.2DS, FXS, or TS and typically developing (TD) girls, aged 7 to 15 years, completed an attention network test, a flanker task with alerting and orienting cues. Exploration of reaction times and accuracy allowed us to test for potential commonalities in attentional functioning in alerting, orienting, and executive control. Linear regression models were used to test whether the predictors of group and chronological age were able to predict differences in attention indices. Results Girls with 22q11.2DS, FXS, or TS demonstrated unimpaired function of the alerting system and impaired function of the executive control system. Diagnosis-specific impairments were found such that girls with FXS made more errors and had a reduced orienting index, while girls with 22q11.2DS showed specific age-related deficits in the executive control system. Conclusions These results suggest that the control but not the implementation of attention is selectively impaired in girls with 22q11.2DS, TS or FXS. Additionally, the age effect on executive control in girls with 22q11.2DS implies a possible altered developmental trajectory. PMID:24628892

Low emotion-oriented coping and informal help-seeking behaviour as major predictive factors for improvement in major depression at 5-year follow-up in the adult community.

PubMed

Rodgers, S; Vandeleur, C L; Strippoli, M-P F; Castelao, E; Tesic, A; Glaus, J; Lasserre, A M; Müller, M; Rössler, W; Ajdacic-Gross, V; Preisig, M

2017-09-01

Given the broad range of biopsychosocial difficulties resulting from major depressive disorder (MDD), reliable evidence for predictors of improved mental health is essential, particularly from unbiased prospective community samples. Consequently, a broad spectrum of potential clinical and non-clinical predictors of improved mental health, defined as an absence of current major depressive episode (MDE) at follow-up, were examined over a 5-year period in an adult community sample. The longitudinal population-based PsyCoLaus study from the city of Lausanne, Switzerland, was used. Subjects having a lifetime MDD with a current MDE at baseline assessment were selected, resulting in a subsample of 210 subjects. Logistic regressions were applied to the data. Coping styles were the most important predictive factors in the present study. More specifically, low emotion-oriented coping and informal help-seeking behaviour at baseline were associated with the absence of an MDD diagnosis at follow-up. Surprisingly, neither formal help-seeking behaviour, nor psychopharmacological treatment, nor childhood adversities, nor depression subtypes turned out to be relevant predictors in the current study. The paramount role of coping styles as predictors of improvement in depression found in the present study might be a valuable target for resource-oriented therapeutic models. On the one hand, the positive impact of low emotion-oriented coping highlights the utility of clinical interventions interrupting excessive mental ruminations during MDE. On the other hand, the importance of informal social networks raises questions regarding how to enlarge the personal network of affected subjects and on how to best support informal caregivers.

Using temporal orientation, category fluency, and word recall for detecting cognitive impairment: the 10-point cognitive screener (10-CS).

PubMed

Apolinario, Daniel; Lichtenthaler, Daniel Gomes; Magaldi, Regina Miksian; Soares, Aline Thomaz; Busse, Alexandre Leopold; Amaral, Jose Renato das Gracas; Jacob-Filho, Wilson; Brucki, Sonia Maria Dozzi

2016-01-01

A screening strategy composed of three-item temporal orientation and three-word recall has been increasingly used for detecting cognitive impairment. However, the intervening task administered between presentation and recall has varied. We evaluated six brief tasks that could be useful as intervening distractors and possibly provide incremental accuracy: serial subtraction, clock drawing, category fluency, letter fluency, timed visual detection, and digits backwards. Older adults (n = 230) consecutively referred for suspected cognitive impairment underwent a comprehensive assessment for gold-standard diagnosis, of whom 56 (24%) presented cognitive impairment not dementia and 68 (30%) presented dementia. Among those with dementia, 87% presented very mild or mild stages (Clinical Dementia Rating 0.5 or 1). The incremental value of each candidate intervening task in a model already containing orientation and word recall was assessed. Category fluency (animal naming) presented the highest incremental value among the six candidate intervening tasks. Reclassification analyses revealed a net gain of 12% among cognitively impaired and 17% among normal participants. A four-point scaled score of the animal naming task was added to three-item temporal orientation and three-word recall to compose the 10-point Cognitive Screener. The education-adjusted 10-point Cognitive Screener outperformed the longer Mini-Mental State Examination for detecting both cognitive impairment (area under the curve 0.85 vs 0.77; p = 0.027) and dementia (area under the curve 0.90 vs 0.83; p = 0.015). Based on empirical data, we have developed a brief and easy-to-use screening strategy with higher accuracy and some practical advantages compared with commonly used tools. Copyright © 2015 John Wiley & Sons, Ltd.

V1 orientation plasticity is explained by broadly tuned feedforward inputs and intracortical sharpening.

PubMed

Teich, Andrew F; Qian, Ning

2010-03-01

Orientation adaptation and perceptual learning change orientation tuning curves of V1 cells. Adaptation shifts tuning curve peaks away from the adapted orientation, reduces tuning curve slopes near the adapted orientation, and increases the responses on the far flank of tuning curves. Learning an orientation discrimination task increases tuning curve slopes near the trained orientation. These changes have been explained previously in a recurrent model (RM) of orientation selectivity. However, the RM generates only complex cells when they are well tuned, so that there is currently no model of orientation plasticity for simple cells. In addition, some feedforward models, such as the modified feedforward model (MFM), also contain recurrent cortical excitation, and it is unknown whether they can explain plasticity. Here, we compare plasticity in the MFM, which simulates simple cells, and a recent modification of the RM (MRM), which displays a continuum of simple-to-complex characteristics. Both pre- and postsynaptic-based modifications of the recurrent and feedforward connections in the models are investigated. The MRM can account for all the learning- and adaptation-induced plasticity, for both simple and complex cells, while the MFM cannot. The key features from the MRM required for explaining plasticity are broadly tuned feedforward inputs and sharpening by a Mexican hat intracortical interaction profile. The mere presence of recurrent cortical interactions in feedforward models like the MFM is insufficient; such models have more rigid tuning curves. We predict that the plastic properties must be absent for cells whose orientation tuning arises from a feedforward mechanism.

A linear model fails to predict orientation selectivity of cells in the cat visual cortex.

PubMed Central

Volgushev, M; Vidyasagar, T R; Pei, X

1996-01-01

1. Postsynaptic potentials (PSPs) evoked by visual stimulation in simple cells in the cat visual cortex were recorded using in vivo whole-cell technique. Responses to small spots of light presented at different positions over the receptive field and responses to elongated bars of different orientations centred on the receptive field were recorded. 2. To test whether a linear model can account for orientation selectivity of cortical neurones, responses to elongated bars were compared with responses predicted by a linear model from the receptive field map obtained from flashing spots. 3. The linear model faithfully predicted the preferred orientation, but not the degree of orientation selectivity or the sharpness of orientation tuning. The ratio of optimal to non-optimal responses was always underestimated by the model. 4. Thus non-linear mechanisms, which can include suppression of non-optimal responses and/or amplification of optimal responses, are involved in the generation of orientation selectivity in the primary visual cortex. PMID:8930828

Runtime Verification in Context : Can Optimizing Error Detection Improve Fault Diagnosis

NASA Technical Reports Server (NTRS)

Dwyer, Matthew B.; Purandare, Rahul; Person, Suzette

2010-01-01

Runtime verification has primarily been developed and evaluated as a means of enriching the software testing process. While many researchers have pointed to its potential applicability in online approaches to software fault tolerance, there has been a dearth of work exploring the details of how that might be accomplished. In this paper, we describe how a component-oriented approach to software health management exposes the connections between program execution, error detection, fault diagnosis, and recovery. We identify both research challenges and opportunities in exploiting those connections. Specifically, we describe how recent approaches to reducing the overhead of runtime monitoring aimed at error detection might be adapted to reduce the overhead and improve the effectiveness of fault diagnosis.

HIV Diagnosis, Linkage to Care, and Retention among Men Who Have Sex with Men and Transgender Women in Guatemala City

PubMed Central

Barrington, Clare; Knudston, Kelly; Bailey, Olga Alicia Paz; Aguilar, Jose Manuel; Loya-Montiel, Marilu Itzel; Morales-Miranda, Sonia

2017-01-01

Men who have sex with men (MSM) and transgender women are disproportionately affected by HIV in Guatemala, yet little is known about their experiences with diagnosis, linkage to care, and retention. We conducted qualitative interviews with 26 MSM and transgender women living with HIV in Guatemala City. HIV diagnosis experiences changed over time with increasing asymptomatic testing at non-governmental organizations. Fear of the physical and social impacts of HIV delayed testing, acceptance of diagnosis, and linkage to HIV care. These fears were driven by layered stigma and discrimination due to non-normative gender expressions and/or sexual orientation. Retention-specific determinants included HIV clinic dynamics and limited employment opportunities. There is an urgent need to improve support systems for early testing and linkage to care and to expand employment opportunities. Stigma and discrimination must be addressed at the family, clinic and contextual levels to reduce fear of diagnosis and improve access to care. PMID:27818436

Automatic estimation of retinal nerve fiber bundle orientation in SD-OCT images using a structure-oriented smoothing filter

NASA Astrophysics Data System (ADS)

Ghafaryasl, Babak; Baart, Robert; de Boer, Johannes F.; Vermeer, Koenraad A.; van Vliet, Lucas J.

2017-02-01

Optical coherence tomography (OCT) yields high-resolution, three-dimensional images of the retina. A better understanding of retinal nerve fiber bundle (RNFB) trajectories in combination with visual field data may be used for future diagnosis and monitoring of glaucoma. However, manual tracing of these bundles is a tedious task. In this work, we present an automatic technique to estimate the orientation of RNFBs from volumetric OCT scans. Our method consists of several steps, starting from automatic segmentation of the RNFL. Then, a stack of en face images around the posterior nerve fiber layer interface was extracted. The image showing the best visibility of RNFB trajectories was selected for further processing. After denoising the selected en face image, a semblance structure-oriented filter was applied to probe the strength of local linear structure in a discrete set of orientations creating an orientation space. Gaussian filtering along the orientation axis in this space is used to find the dominant orientation. Next, a confidence map was created to supplement the estimated orientation. This confidence map was used as pixel weight in normalized convolution to regularize the semblance filter response after which a new orientation estimate can be obtained. Finally, after several iterations an orientation field corresponding to the strongest local orientation was obtained. The RNFB orientations of six macular scans from three subjects were estimated. For all scans, visual inspection shows a good agreement between the estimated orientation fields and the RNFB trajectories in the en face images. Additionally, a good correlation between the orientation fields of two scans of the same subject was observed. Our method was also applied to a larger field of view around the macula. Manual tracing of the RNFB trajectories shows a good agreement with the automatically obtained streamlines obtained by fiber tracking.

Distributed health literacy among people living with type 2 diabetes in Portugal: Defining levels of awareness and support.

PubMed

Abreu, Liliana; Nunes, João Arriscado; Taylor, Peter; Silva, Susana

2018-01-01

This study embraces a patient-centred and narrative-oriented notion of health literacy, exploring how social networks and personal experiences constitute distributed health literacy (DHL) by mapping out health literacy mediators of each individual and how they enable self-management skills and knowledge of health conditions. Semi-structured interviews with 26 patients with type 2 diabetes were conducted in a Primary Care Center of Porto (Portugal) from October 2014 to December 2015. Data were collected based on McGill Illness Narrative Interview (MINI). Following the grounded theory, interviews were analysed as case-based and process-tracing-oriented. Three awareness narratives emerged: (i) a narrative of minimisation revealing minimal impact of diabetes in patients' lives and daily routines, resignation towards "inevitable" consequences of the diagnosis and dependence of a large network of health literacy mediators; (ii) a narrative of empathy, where patients tended to mention readjustments in their lives by following medical recommendations regarding medication without criticism and with few health literacy mediators; (iii) a narrative of disruption, with patients highlighting the huge impact of diabetes on their lives and their individual responsibility and autonomy with respect to the management of diabetes and the search for alternatives to medication, relying on a very restrictive network of mediators. Exploring meanings given to diagnosis, identifying health mediators and analysing the structure of social networks can contribute to understand the distributed nature of health literacy. Assessing DHL can assist health professionals and those providing care in the community in promoting health literacy and providing models for a more patient-centred health system. © 2017 John Wiley & Sons Ltd.

Parameterized hardware description as object oriented hardware model implementation

NASA Astrophysics Data System (ADS)

Drabik, Pawel K.

2010-09-01

The paper introduces novel model for design, visualization and management of complex, highly adaptive hardware systems. The model settles component oriented environment for both hardware modules and software application. It is developed on parameterized hardware description research. Establishment of stable link between hardware and software, as a purpose of designed and realized work, is presented. Novel programming framework model for the environment, named Graphic-Functional-Components is presented. The purpose of the paper is to present object oriented hardware modeling with mentioned features. Possible model implementation in FPGA chips and its management by object oriented software in Java is described.

Fiber orientation interpolation for the multiscale analysis of short fiber reinforced composite parts

NASA Astrophysics Data System (ADS)

Köbler, Jonathan; Schneider, Matti; Ospald, Felix; Andrä, Heiko; Müller, Ralf

2018-06-01

For short fiber reinforced plastic parts the local fiber orientation has a strong influence on the mechanical properties. To enable multiscale computations using surrogate models we advocate a two-step identification strategy. Firstly, for a number of sample orientations an effective model is derived by numerical methods available in the literature. Secondly, to cover a general orientation state, these effective models are interpolated. In this article we develop a novel and effective strategy to carry out this interpolation. Firstly, taking into account symmetry arguments, we reduce the fiber orientation phase space to a triangle in R^2 . For an associated triangulation of this triangle we furnish each node with an surrogate model. Then, we use linear interpolation on the fiber orientation triangle to equip each fiber orientation state with an effective stress. The proposed approach is quite general, and works for any physically nonlinear constitutive law on the micro-scale, as long as surrogate models for single fiber orientation states can be extracted. To demonstrate the capabilities of our scheme we study the viscoelastic creep behavior of short glass fiber reinforced PA66, and use Schapery's collocation method together with FFT-based computational homogenization to derive single orientation state effective models. We discuss the efficient implementation of our method, and present results of a component scale computation on a benchmark component by using ABAQUS ®.

Fiber orientation interpolation for the multiscale analysis of short fiber reinforced composite parts

NASA Astrophysics Data System (ADS)

Köbler, Jonathan; Schneider, Matti; Ospald, Felix; Andrä, Heiko; Müller, Ralf

2018-04-01

For short fiber reinforced plastic parts the local fiber orientation has a strong influence on the mechanical properties. To enable multiscale computations using surrogate models we advocate a two-step identification strategy. Firstly, for a number of sample orientations an effective model is derived by numerical methods available in the literature. Secondly, to cover a general orientation state, these effective models are interpolated. In this article we develop a novel and effective strategy to carry out this interpolation. Firstly, taking into account symmetry arguments, we reduce the fiber orientation phase space to a triangle in R^2 . For an associated triangulation of this triangle we furnish each node with an surrogate model. Then, we use linear interpolation on the fiber orientation triangle to equip each fiber orientation state with an effective stress. The proposed approach is quite general, and works for any physically nonlinear constitutive law on the micro-scale, as long as surrogate models for single fiber orientation states can be extracted. To demonstrate the capabilities of our scheme we study the viscoelastic creep behavior of short glass fiber reinforced PA66, and use Schapery's collocation method together with FFT-based computational homogenization to derive single orientation state effective models. We discuss the efficient implementation of our method, and present results of a component scale computation on a benchmark component by using ABAQUS ®.

Therapists' Use of DBT: A Survey Study of Clinical Practice

ERIC Educational Resources Information Center

DiGiorgio, Kimberly E.; Glass, Carol R.; Arnkoff, Diane B.

2010-01-01

The purpose of this study was to examine how therapists conduct Dialectical Behavior Therapy (DBT) individual psychotherapy with clients, focusing on clinical factors that could account for decisions regarding modifications of DBT (e.g., client diagnosis, therapist theoretical orientation, and intensity of DBT training). Additionally, the study…

Learner Support Services for Online Students: Scaffolding for Success.

ERIC Educational Resources Information Center

Ludwig-Hardman, Stacey; Dunlap, Joanna C.

2003-01-01

Effective retention for online students requires learner support services. Based on the principle of scaffolding, these services include intake and diagnosis during recruitment and admission, orientation to online learning, one-to-one advising, and access to a learning community. These supports can help overcome isolation, lack of self-direction…

Neuropsychological Evaluation in the Diagnosis and Treatment of Tourette's Syndrome

ERIC Educational Resources Information Center

Osmon, David C.; Smerz, Jessica M.

2005-01-01

The neurobiological basis of Tourettes syndrome is reviewed for the purpose of presenting a clinically relevant account of the neuropsychology of the disorder for the clinician who is behaviorally oriented. The neuropathology and neuropsychological deficits typically found in Tourettes are reviewed, and a neuropsychological test battery is…

Impact of Remembering Childhood Sexual Abuse on Addiction Recovery for Young Adult Lesbians

ERIC Educational Resources Information Center

Galvin, Christina R.; Brooks-Livingston, Angela

2011-01-01

This article examines the impact of childhood sexual abuse on young adult lesbians' sexual identity and their recovery from chemical dependency. The authors recommend that counselors assess for sexual orientation (past and present), sexual abuse, and possible dual diagnosis. Implications for counselors are discussed.

Efficient numerical modeling of the cornea, and applications

NASA Astrophysics Data System (ADS)

Gonzalez, L.; Navarro, Rafael M.; Hdez-Matamoros, J. L.

2004-10-01

Corneal topography has shown to be an essential tool in the ophthalmology clinic both in diagnosis and custom treatments (refractive surgery, keratoplastia), having also a strong potential in optometry. The post processing and analysis of corneal elevation, or local curvature data, is a necessary step to refine the data and also to extract relevant information for the clinician. In this context a parametric cornea model is proposed consisting of a surface described mathematically by two terms: one general ellipsoid corresponding to a regular base surface, expressed by a general quadric term located at an arbitrary position and free orientation in 3D space and a second term, described by a Zernike polynomial expansion, which accounts for irregularities and departures from the basic geometry. The model has been validated obtaining better adjustment of experimental data than other previous models. Among other potential applications, here we present the determination of the optical axis of the cornea by transforming the general quadric to its canonical form. This has permitted us to perform 3D registration of corneal topographical maps to improve the signal-to-noise ratio. Other basic and clinical applications are also explored.

Developing Formal Object-oriented Requirements Specifications: A Model, Tool and Technique.

ERIC Educational Resources Information Center

Jackson, Robert B.; And Others

1995-01-01

Presents a formal object-oriented specification model (OSS) for computer software system development that is supported by a tool that automatically generates a prototype from an object-oriented analysis model (OSA) instance, lets the user examine the prototype, and permits the user to refine the OSA model instance to generate a requirements…

Firm performance model in small and medium enterprises (SMEs) based on learning orientation and innovation

NASA Astrophysics Data System (ADS)

Lestari, E. R.; Ardianti, F. L.; Rachmawati, L.

2018-03-01

This study investigated the relationship between learning orientation, innovation, and firm performance. A conceptual model and hypothesis were empirically examined using structural equation modelling. The study involved a questionnaire-based survey of owners of small and medium enterprises (SMEs) operating in Batu City, Indonesia. The results showed that both variables of learning orientation and innovation effect positively on firm performance. Additionally, learning orientation has positive effect innovation. This study has implication for SMEs aiming at increasing their firm performance based on learning orientation and innovation capability.

Model Driven Development of Web Services and Dynamic Web Services Composition

DTIC Science & Technology

2005-01-01

27 2.4.1 Feature-Oriented Domain Analysis ( FODA ).......................................27 2.4.2 The need of automation for Feature-Oriented...Diagram Algebra FDL Feature Description Language FODA Feature-Oriented Domain Analysis FSM Finite State Machine GDM Generative Domain...Oriented Domain Analysis ( FODA ) in Section 2.4 and Aspect-Oriented Generative Do- main Modeling (AOGDM) in Section 2.5, which not only represent two

Examining, Documenting, and Modeling the Problem Space of a Variable Domain

DTIC Science & Technology

2002-06-14

Feature-Oriented Domain Analysis ( FODA ) .............................................................................................. 9...development of this proposed process include: Feature-Oriented Domain Analysis ( FODA ) [3,4], Organization Domain Modeling (ODM) [2,5,6], Family-Oriented...configuration knowledge using generators [2]. 8 Existing Methods of Domain Engineering Feature-Oriented Domain Analysis ( FODA ) FODA is a domain

Final Thesis Models in European Teacher Education and Their Orientation towards the Academy and the Teaching Profession

ERIC Educational Resources Information Center

Råde, Anders

2014-01-01

This study concerns different final thesis models in the research on teacher education in Europe and their orientation towards the academy and the teaching profession. In scientific journals, 33 articles support the occurrence of three models: the portfolio model, with a mainly teaching-professional orientation; the thesis model, with a mainly…

Multiscale Shannon's Entropy Modeling of Orientation and Distance in Steel Fiber Micro-Tomography Data.

PubMed

Chiverton, John P; Ige, Olubisi; Barnett, Stephanie J; Parry, Tony

2017-11-01

This paper is concerned with the modeling and analysis of the orientation and distance between steel fibers in X-ray micro-tomography data. The advantage of combining both orientation and separation in a model is that it helps provide a detailed understanding of how the steel fibers are arranged, which is easy to compare. The developed models are designed to summarize the randomness of the orientation distribution of the steel fibers both locally and across an entire volume based on multiscale entropy. Theoretical modeling, simulation, and application to real imaging data are shown here. The theoretical modeling of multiscale entropy for orientation includes a proof showing the final form of the multiscale taken over a linear range of scales. A series of image processing operations are also included to overcome interslice connectivity issues to help derive the statistical descriptions of the orientation distributions of the steel fibers. The results demonstrate that multiscale entropy provides unique insights into both simulated and real imaging data of steel fiber reinforced concrete.

Associates of Engagement in Adult-Oriented Follow-Up Care for Childhood Cancer Survivors.

PubMed

Szalda, Dava; Piece, Lisa; Brumley, Lauren; Li, Yimei; Schapira, Marilyn M; Wasik, Monika; Hobbie, Wendy L; Ginsberg, Jill P; Schwartz, Lisa A

2017-02-01

Understanding how to predict appropriate uptake of adult-oriented medical care is important for adult patients with pediatric-onset chronic health conditions with continued health vulnerability. We examined associates of engagement in adult survivors of childhood cancer following transfer to adult-oriented care. Adult survivors of childhood cancer (N = 80), within 1-5 years post transfer from pediatric to adult-oriented follow-up care, completed assessments of engagement with recommended adult-oriented follow-up care and psychosocial and transition readiness measures. Measures were validated with adolescent and young adults and/or intended to measure readiness to transition to adult care. Earlier age at diagnosis, parental involvement in health care decision-making, higher motivation, and increased comfort speaking to providers about health concerns were significantly associated with attendance at adult-oriented follow-up care visits. Associates of engagement in adult care are complex, representing social-ecological variables. Current measures of transition readiness or adolescent and young adult health-related measures may not adequately capture the associates of engagement in care or identify targets of intervention to promote successful transfer of care. Identifying patients at risk for loss to follow-up will be useful to design interventions for young adult survivors of childhood cancer and other young adults with pediatric-onset chronic conditions who require ongoing adult-oriented care. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Sexual health behaviors and sexual orientation in a U.S. national sample of college students.

PubMed

Oswalt, Sara B; Wyatt, Tammy J

2013-11-01

Many studies have examined differences in sexual behavior based on sexual orientation with results often indicating that those with same-sex partners engage in higher risk sexual behavior than people with opposite sex partners. However, few of these studies were large, national sample studies that also include those identifying as unsure. To address that gap, this study examined the relationship of sexual orientation and sexual health outcomes in a national sample of U.S. college students. The Fall 2009 American College Health Association-National College Health Assessment was used to examine sexual health related responses from heterosexual, gay, lesbian, bisexual, and unsure students (N = 25,553). Responses related to sexual behavior, safer sex behaviors, prevention and screening behaviors, and diagnosis of sexual health related conditions were examined. The findings indicated that sexual orientation was significantly associated with engaging in sexual behavior in the last 30 days. Sexual orientation was also significantly associated with the number of sexual partners in the previous 12 months, with unsure men having significantly more partners than gay, bisexual and heterosexual men and heterosexual men having significantly less partners than gay, bisexual and unsure men. Bisexual women had significantly more partners than females reporting other sexual orientations. Results examining the associations between sexual orientation and safer sex, prevention behaviors, and screening behaviors were mixed. Implications for practice, including specific programmatic ideas, were discussed.

Hails from the crypt: a terror management health model investigation of the effectiveness of health-oriented versus celebrity-oriented endorsements.

PubMed

McCabe, Simon; Vail, Kenneth E; Arndt, Jamie; Goldenberg, Jamie L

2014-03-01

Interfacing the terror management health model with the meaning transfer model, we offer novel hypotheses concerning the effectiveness of celebrity and medical endorsements for consumer products and health behavior decisions. Studies 1 and 2 revealed that, compared with control topic primes, death thoughts in focal attention increased the effectiveness of health-oriented (doctor) endorsers but not culture-oriented (celebrity) endorsers, whereas death thoughts outside of focal attention increased the effectiveness of culture-oriented endorsers but not health-oriented endorsers. Studies 3 and 4 then focus more specifically on the valence and specificity of culture-oriented endorsements, revealing that death thoughts outside focal attention increase the effectiveness of culture-oriented endorsers only on the behaviors specifically endorsed and only when the endorser is characterized as possessing cultural value. Discussion focuses on everyday management of existential concerns and implications for persuasive communications in the health domain.

The impact of client sexual orientation and gender on clinical judgments and diagnosis of borderline personality disorder.

PubMed

Eubanks-Carter, Catherine; Goldfried, Marvin R

2006-06-01

Concerns have been raised that individuals who are having difficulty coming out as gay or bisexual may be misdiagnosed with borderline personality disorder. In this analogue study, 141 psychologists evaluated a hypothetical client with problems that resembled borderline symptoms but were also consistent with a sexual identity crisis. Client descriptions varied by sexual orientation and gender. Results revealed an effect of sexual orientation for male clients, but not female clients. Male clients whom therapists perceived likely to be gay or bisexual, and male clients with partners of unspecified gender, were more likely to be diagnosed with borderline personality disorder. Therapists were more confident and willing to work with female clients and gave them a better prognosis. Therapists' responses are discussed in light of gender role bias and social desirability.

Coronary Heart Disease Preoperative Gesture Interactive Diagnostic System Based on Augmented Reality.

PubMed

Zou, Yi-Bo; Chen, Yi-Min; Gao, Ming-Ke; Liu, Quan; Jiang, Si-Yu; Lu, Jia-Hui; Huang, Chen; Li, Ze-Yu; Zhang, Dian-Hua

2017-08-01

Coronary heart disease preoperative diagnosis plays an important role in the treatment of vascular interventional surgery. Actually, most doctors are used to diagnosing the position of the vascular stenosis and then empirically estimating vascular stenosis by selective coronary angiography images instead of using mouse, keyboard and computer during preoperative diagnosis. The invasive diagnostic modality is short of intuitive and natural interaction and the results are not accurate enough. Aiming at above problems, the coronary heart disease preoperative gesture interactive diagnostic system based on Augmented Reality is proposed. The system uses Leap Motion Controller to capture hand gesture video sequences and extract the features which that are the position and orientation vector of the gesture motion trajectory and the change of the hand shape. The training planet is determined by K-means algorithm and then the effect of gesture training is improved by multi-features and multi-observation sequences for gesture training. The reusability of gesture is improved by establishing the state transition model. The algorithm efficiency is improved by gesture prejudgment which is used by threshold discriminating before recognition. The integrity of the trajectory is preserved and the gesture motion space is extended by employing space rotation transformation of gesture manipulation plane. Ultimately, the gesture recognition based on SRT-HMM is realized. The diagnosis and measurement of the vascular stenosis are intuitively and naturally realized by operating and measuring the coronary artery model with augmented reality and gesture interaction techniques. All of the gesture recognition experiments show the distinguish ability and generalization ability of the algorithm and gesture interaction experiments prove the availability and reliability of the system.

BPMN as a Communication Language for the Process- and Event-Oriented Perspectives in Fact-Oriented Conceptual Models

NASA Astrophysics Data System (ADS)

Bollen, Peter

In this paper we will show how the OMG specification of BPMN (Business Process Modeling Notation) can be used to model the process- and event-oriented perspectives of an application subject area. We will illustrate how the fact-oriented conceptual models for the information-, process- and event perspectives can be used in a 'bottom-up' approach for creating a BPMN model in combination with other approaches, e.g. the use of a textual description. We will use the common doctor's office example as a running example in this article.

Heterogeneous nucleation of polymorphs on polymer surfaces: polymer-molecule interactions using a heterogeneous dielectric solvation model.

PubMed

Wahlberg, Nanna; Madsen, Anders Ø; Mikkelsen, Kurt V

2018-06-09

We have investigated the mechanism of the nucleation of acetaminophen on poly(methyl-methacrylate) and poly(vinyl-acetate) utilizing a combination of quantum mechanical computations and electrostatic models. We have used a heterogeneous dielectric solvation model to determine the stability of different orientations of acetaminophen on polymer surfaces. We find that for the nucleation of acetaminophen on the polymer surfaces in vacuum, the most stable orientation is a flat orientation. For the nucleation process in solution where acetaminophen and the polymer surface are surrounded by a solvent, we find that the heterogeneous dielectric solvation model predicts that a sideways orientation is the most stable orientation.

The Impact of Sexual Orientation on Women's Midlife Experience: A Transition Model Approach

ERIC Educational Resources Information Center

Boyer, Carol Anderson

2007-01-01

Sexual orientation is an integral part of identity affecting every stage of an individual's development. This literature review examines women's cultural experiences based on sexual orientation and their effect on midlife experience. A developmental model is offered that incorporates sexual orientation as a contextual factor in this developmental…

A theoretical model for optical oximetry at the capillary-level by optical coherence tomography (Conference Presentation)

NASA Astrophysics Data System (ADS)

Liu, Rongrong; Spicer, Graham; Chen, Siyu; Zhang, Hao F.; Yi, Ji; Backman, Vadim

2017-02-01

Oxygen saturation (sO2) of RBCs in capillaries can indirectly assess local tissue oxygenation and metabolic function. For example, the altered retinal oxygenation in diabetic retinopathy and local hypoxia during tumor development in cancer are reflected by abnormal sO2 of local capillary networks. However, it is far from clear whether accurate label-free optical oximetry (i.e. measuring hemoglobin sO2) is feasible from dispersed red blood cells (RBCs) at the single-capillary level. The sO2-dependent hemoglobin absorption contrast present in optical scattering signal is complicated by geometry-dependent scattering from RBCs. Here we provide a theoretical model to calculate the backscattering spectra of single RBCs based on the first-order Born approximation, considering the orientation, size variation, and deformation of RBCs. We show that the oscillatory spectral behavior of RBC geometries is smoothed by variations in cell size and orientation, resulting in clear sO2-dependent spectral contrast. In addition, this spectral contrast persists with different deformations of RBCs, allowing the sO2 of individual RBCs in capillaries to be characterized. The theoretical model is verified by Mie theory and experiments using visible light optical coherence tomography (vis-OCT). Thus, this study shows for the first time the feasibility of, and provides a theoretical model for, label-free optical oximetry at the single-capillary level by backscattering-based imaging modalities, challenging the popular view that such measurements are impossible at the single-capillary level. This is promising for in vivo backscattering-based optical oximetry at the single-capillary level, to measure local capillary sO2 for early diagnosis, progression monitoring, and treatment evaluation of diabetic retinopathy and cancer.

Application of the critical pathway and integrated case teaching method to nursing orientation.

PubMed

Goodman, D

1997-01-01

Nursing staff development programs must be responsive to current changes in healthcare. New nursing staff must be prepared to manage continuous change and to function competently in clinical practice. The orientation pathway, based on a case management model, is used as a structure for the orientation phase of staff development. The integrated case is incorporated as a teaching strategy in orientation. The integrated case method is based on discussion and analysis of patient situations with emphasis on role modeling and integration of theory and skill. The orientation pathway and integrated case teaching method provide a useful framework for orientation of new staff. Educators, preceptors and orientees find the structure provided by the orientation pathway very useful. Orientation that is developed, implemented and evaluated based on a case management model with the use of an orientation pathway and incorporation of an integrated case teaching method provides a standardized structure for orientation of new staff. This approach is designed for the adult learner, promotes conceptual reasoning, and encourages the social and contextual basis for continued learning.

Automated database-guided expert-supervised orientation for immunophenotypic diagnosis and classification of acute leukemia

PubMed Central

Lhermitte, L; Mejstrikova, E; van der Sluijs-Gelling, A J; Grigore, G E; Sedek, L; Bras, A E; Gaipa, G; Sobral da Costa, E; Novakova, M; Sonneveld, E; Buracchi, C; de Sá Bacelar, T; te Marvelde, J G; Trinquand, A; Asnafi, V; Szczepanski, T; Matarraz, S; Lopez, A; Vidriales, B; Bulsa, J; Hrusak, O; Kalina, T; Lecrevisse, Q; Martin Ayuso, M; Brüggemann, M; Verde, J; Fernandez, P; Burgos, L; Paiva, B; Pedreira, C E; van Dongen, J J M; Orfao, A; van der Velden, V H J

2018-01-01

Precise classification of acute leukemia (AL) is crucial for adequate treatment. EuroFlow has previously designed an AL orientation tube (ALOT) to guide towards the relevant classification panel (T-cell acute lymphoblastic leukemia (T-ALL), B-cell precursor (BCP)-ALL and/or acute myeloid leukemia (AML)) and final diagnosis. Now we built a reference database with 656 typical AL samples (145 T-ALL, 377 BCP-ALL, 134 AML), processed and analyzed via standardized protocols. Using principal component analysis (PCA)-based plots and automated classification algorithms for direct comparison of single-cells from individual patients against the database, another 783 cases were subsequently evaluated. Depending on the database-guided results, patients were categorized as: (i) typical T, B or Myeloid without or; (ii) with a transitional component to another lineage; (iii) atypical; or (iv) mixed-lineage. Using this automated algorithm, in 781/783 cases (99.7%) the right panel was selected, and data comparable to the final WHO-diagnosis was already provided in >93% of cases (85% T-ALL, 97% BCP-ALL, 95% AML and 87% mixed-phenotype AL patients), even without data on the full-characterization panels. Our results show that database-guided analysis facilitates standardized interpretation of ALOT results and allows accurate selection of the relevant classification panels, hence providing a solid basis for designing future WHO AL classifications. PMID:29089646

A practical approach to fibromyalgia.

PubMed Central

Cymet, Tyler Childs

2003-01-01

Fibromyalgia is the name given to a collection of symptoms with no clear physiologic cause, The constellation of symptoms are clearly recognizable as a distinct pathologic entity. The diagnosis is made through clinical observations made by the examiner. Differential diagnosis must include other somatic syndromes as well as disease entities like hepatitis, hypothyroidism, diabetes mellitus, electrolyte imbalance, multiple sclerosis, and cancer. Diagnostic criteria are given as guidelines for the diagnosis, not as absolute requirements. Treatment of this condition remains individualized and relies heavily on having a therapeutic relationship with a provider. Treatment of this syndrome needs to be looked at as an ongoing process. Goal oriented treatment aimed at maintaining specific functions can be directed at helping a patient get restorative sleep, alleviating the somatic pains that ail the patient, keeping a person productive, regulating schedules or through goal oriented agreements made with the patient. Since this syndrome is chronic and may effect all areas of a persons functioning the family and social support system of the person being treated need to be evaluated. Patients often seek alternative medical treatments for this problem including diet therapy, acupuncture, and herbal therapy. Treatment must involve more than just the symptoms presented and the patient can only be treated successfully if they are willing to work at changing their own perceptions, and ways of relating to stressors in their world. PMID:12749618

[The literature of diagnosis and therapy].

PubMed

Schubert, András

2014-09-28

This analysis is based on papers published in periodicals, in the period 1975-2013 with title words referring to diagnosis or therapy. The literature of both topics is growing dynamically and in an ever accelerating pace. At the same time, the two topics appear to get more and more separated, except for a part of the German-language literature. The share of therapy-oriented literature is increasing and its citation rate is higher, although 9 of the 10 most cited papers are from the topic of diagnostics. The Hungarian literature (papers having at least one Hungarian author) appeared to be proportional and balanced.

Colors and contact dermatitis.

PubMed

Bonamonte, Domenico; Foti, Caterina; Romita, Paolo; Vestita, Michelangelo; Angelini, Gianni

2014-01-01

The diagnosis of skin diseases relies on several clinical signs, among which color is of paramount importance. In this review, we consider certain clinical presentations of both eczematous and noneczematous contact dermatitis in which color plays a peculiar role orientating toward the right diagnosis. The conditions that will be discussed include specific clinical-morphologic subtypes of eczematous contact dermatitis, primary melanocytic, and nonmelanocytic contact hyperchromia, black dermographism, contact chemical leukoderma, and others. Based on the physical, chemical, and biologic factors underlying a healthy skin color, the various skin shades drawing a disease picture are thoroughly debated, stressing their etiopathogenic origins and histopathologic aspects.

Procedure for the systematic orientation of digitised cranial models. Design and validation.

PubMed

Bailo, M; Baena, S; Marín, J J; Arredondo, J M; Auría, J M; Sánchez, B; Tardío, E; Falcón, L

2015-12-01

Comparison of bony pieces requires that they are oriented systematically to ensure that homologous regions are compared. Few orientation methods are highly accurate; this is particularly true for methods applied to three-dimensional models obtained by surface scanning, a technique whose special features make it a powerful tool in forensic contexts. The aim of this study was to develop and evaluate a systematic, assisted orientation method for aligning three-dimensional cranial models relative to the Frankfurt Plane, which would be produce accurate orientations independent of operator and anthropological expertise. The study sample comprised four crania of known age and sex. All the crania were scanned and reconstructed using an Eva Artec™ portable 3D surface scanner and subsequently, the position of certain characteristic landmarks were determined by three different operators using the Rhinoceros 3D surface modelling software. Intra-observer analysis showed a tendency for orientation to be more accurate when using the assisted method than when using conventional manual orientation. Inter-observer analysis showed that experienced evaluators achieve results at least as accurate if not more accurate using the assisted method than those obtained using manual orientation; while inexperienced evaluators achieved more accurate orientation using the assisted method. The method tested is a an innovative system capable of providing very precise, systematic and automatised spatial orientations of virtual cranial models relative to standardised anatomical planes independent of the operator and operator experience. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Multi-model stereo restitution

USGS Publications Warehouse

Dueholm, K.S.

1990-01-01

Methods are described that permit simultaneous orientation of many small-frame photogrammetric models in an analytical plotter. The multi-model software program enables the operator to move freely between the oriented models during interpretation and mapping. Models change automatically when the measuring mark is moved from one frame to another, moving to the same ground coordinates in the neighboring model. Thus, data collection and plotting can be performed continuously across model boundaries. The orientation of the models is accomplished by a bundle block adjustment. -from Author

A Four-Component Model of Sexual Orientation & Its Application to Psychotherapy.

PubMed

Bowins, Brad

Distress related to sexual orientation is a common focus in psychotherapy. In some instances the distress is external in nature as with persecution, and in others it is internal as with self-acceptance issues. Complicating matters, sexual orientation is a very complex topic producing a great deal of confusion for both clients and therapists. The current paper provides a four component model-sexual orientation dimensions, activation of these dimensions, the role of erotic fantasy, and social construction of sexual orientation-that in combination provide a comprehensive perspective. Activation of dimensions is a novel contribution not proposed in any other model. With improved understanding of sexual orientation issues, and utilization of this knowledge to guide interventions, psychotherapists can improve outcomes with their clients. Also described is how dimensions of sexual orientation relate to transgender. In addition to improving psychotherapy outcomes, the fourcomponent model presented can help reduce discrimination and persecution, by demonstrating that the capacity for both homoerotic and heteroerotic behavior is universal.

FIBER ORIENTATION IN INJECTION MOLDED LONG CARBON FIBER THERMOPLASTIC COMPOSITES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Jin; Nguyen, Ba Nghiep; Mathur, Raj N.

2015-03-23

A set of edge-gated and center-gated plaques were injection molded with long carbon fiber-reinforced thermoplastic composites, and the fiber orientation was measured at different locations of the plaques. Autodesk Simulation Moldflow Insight (ASMI) software was used to simulate the injection molding of these plaques and to predict the fiber orientation, using the anisotropic rotary diffusion and the reduced strain closure models. The phenomenological parameters of the orientation models were carefully identified by fitting to the measured orientation data. The fiber orientation predictions show very good agreement with the experimental data.

Reliability and Validity of the SPAID-G Checklist for Detecting Psychiatric Disorders in Adults with Intellectual Disability

ERIC Educational Resources Information Center

Bertelli, Marco; Scuticchio, Daniela; Ferrandi, Angela, Lassi, Stefano; Mango, Francesco; Ciavatta, Claudio; Porcelli, Cesare; Bianco, Annamaria; Monchieri, Sergio

2012-01-01

SPAID (Psychiatric Instrument for the Intellectually Disabled Adult) is the first Italian tool-package for carrying out psychiatric diagnosis in adults with Intellectual Disabilities (ID). It includes the "G" form, for general diagnostic orientation, and specific checklists for all groups of syndromes stated by the available…

Training and Development Professionals and Mergers and Acquisitions: What Is the Story on Their Involvement?

ERIC Educational Resources Information Center

Rifai, Rana; Waight, Consuelo L.

2006-01-01

This study explored the involvement of 15 training and development (T & D) professionals during mergers and acquisitions (M & A). The study found that T & D professionals are highly involved in orientation and management training and organization development related activities such as communication and diagnosis and blending of organizational…

Biologically Inspired Model for Inference of 3D Shape from Texture

PubMed Central

Gomez, Olman; Neumann, Heiko

2016-01-01

A biologically inspired model architecture for inferring 3D shape from texture is proposed. The model is hierarchically organized into modules roughly corresponding to visual cortical areas in the ventral stream. Initial orientation selective filtering decomposes the input into low-level orientation and spatial frequency representations. Grouping of spatially anisotropic orientation responses builds sketch-like representations of surface shape. Gradients in orientation fields and subsequent integration infers local surface geometry and globally consistent 3D depth. From the distributions in orientation responses summed in frequency, an estimate of the tilt and slant of the local surface can be obtained. The model suggests how 3D shape can be inferred from texture patterns and their image appearance in a hierarchically organized processing cascade along the cortical ventral stream. The proposed model integrates oriented texture gradient information that is encoded in distributed maps of orientation-frequency representations. The texture energy gradient information is defined by changes in the grouped summed normalized orientation-frequency response activity extracted from the textured object image. This activity is integrated by directed fields to generate a 3D shape representation of a complex object with depth ordering proportional to the fields output, with higher activity denoting larger distance in relative depth away from the viewer. PMID:27649387

Intergenerational Transmission of Tridimensional Cultural Orientations in Chinese American Families: The Role of Bicultural Socialization

PubMed Central

Kim, Su Yeong; Hou, Yang

2016-01-01

It is important to understand the acculturation process of ethnic minority youth: To which cultures do they orient, and how do their cultural orientations develop? The present study tests a tridimensional acculturation model in Chinese American families and examines a potential mechanism through which parental cultural orientations may relate to adolescent cultural orientations. Participants were 350 Chinese American adolescents (Mage =17.04, 58% female) and their parents in Northern California. Results support the tridimensional acculturation model by demonstrating moderate associations among Chinese American orientation, Chinese orientation, and American orientation; our findings also point to a unique effect of parental Chinese American orientation on parental bicultural socialization beliefs. Most importantly, we identified an indirect pathway from parental to adolescents’ Chinese American orientation through adolescents’ internalization of parental bicultural socialization beliefs. PMID:26781739

DIORAMA Model of Satellite Body Orientation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Werley, Kenneth Alan

2016-03-04

The DIORAMA GPS satellite platform orientation model is described. Satellites need to keep sensors pointed towards the earth and solar panels oriented to face the sun (when not in the earth’s shadow) while they orbit the earth.

Development and matching of binocular orientation preference in mouse V1.

PubMed

Bhaumik, Basabi; Shah, Nishal P

2014-01-01

Eye-specific thalamic inputs converge in the primary visual cortex (V1) and form the basis of binocular vision. For normal binocular perceptions, such as depth and stereopsis, binocularly matched orientation preference between the two eyes is required. A critical period of binocular matching of orientation preference in mice during normal development is reported in literature. Using a reaction diffusion model we present the development of RF and orientation selectivity in mouse V1 and investigate the binocular orientation preference matching during the critical period. At the onset of the critical period the preferred orientations of the modeled cells are mostly mismatched in the two eyes and the mismatch decreases and reaches levels reported in juvenile mouse by the end of the critical period. At the end of critical period 39% of cells in binocular zone in our model cortex is orientation selective. In literature around 40% cortical cells are reported as orientation selective in mouse V1. The starting and the closing time for critical period determine the orientation preference alignment between the two eyes and orientation tuning in cortical cells. The absence of near neighbor interaction among cortical cells during the development of thalamo-cortical wiring causes a salt and pepper organization in the orientation preference map in mice. It also results in much lower % of orientation selective cells in mice as compared to ferrets and cats having organized orientation maps with pinwheels.

Role of Gist and PHOG Features in Computer-Aided Diagnosis of Tuberculosis without Segmentation

PubMed Central

Chauhan, Arun; Chauhan, Devesh; Rout, Chittaranjan

2014-01-01

Purpose Effective diagnosis of tuberculosis (TB) relies on accurate interpretation of radiological patterns found in a chest radiograph (CXR). Lack of skilled radiologists and other resources, especially in developing countries, hinders its efficient diagnosis. Computer-aided diagnosis (CAD) methods provide second opinion to the radiologists for their findings and thereby assist in better diagnosis of cancer and other diseases including TB. However, existing CAD methods for TB are based on the extraction of textural features from manually or semi-automatically segmented CXRs. These methods are prone to errors and cannot be implemented in X-ray machines for automated classification. Methods Gabor, Gist, histogram of oriented gradients (HOG), and pyramid histogram of oriented gradients (PHOG) features extracted from the whole image can be implemented into existing X-ray machines to discriminate between TB and non-TB CXRs in an automated manner. Localized features were extracted for the above methods using various parameters, such as frequency range, blocks and region of interest. The performance of these features was evaluated against textural features. Two digital CXR image datasets (8-bit DA and 14-bit DB) were used for evaluating the performance of these features. Results Gist (accuracy 94.2% for DA, 86.0% for DB) and PHOG (accuracy 92.3% for DA, 92.0% for DB) features provided better results for both the datasets. These features were implemented to develop a MATLAB toolbox, TB-Xpredict, which is freely available for academic use at http://sourceforge.net/projects/tbxpredict/. This toolbox provides both automated training and prediction modules and does not require expertise in image processing for operation. Conclusion Since the features used in TB-Xpredict do not require segmentation, the toolbox can easily be implemented in X-ray machines. This toolbox can effectively be used for the mass screening of TB in high-burden areas with improved efficiency. PMID:25390291

Automated synthesis, insertion and detection of polyps for CT colonography

NASA Astrophysics Data System (ADS)

Sezille, Nicolas; Sadleir, Robert J. T.; Whelan, Paul F.

2003-03-01

CT Colonography (CTC) is a new non-invasive colon imaging technique which has the potential to replace conventional colonoscopy for colorectal cancer screening. A novel system which facilitates automated detection of colorectal polyps at CTC is introduced. As exhaustive testing of such a system using real patient data is not feasible, more complete testing is achieved through synthesis of artificial polyps and insertion into real datasets. The polyp insertion is semi-automatic: candidate points are manually selected using a custom GUI, suitable points are determined automatically from an analysis of the local neighborhood surrounding each of the candidate points. Local density and orientation information are used to generate polyps based on an elliptical model. Anomalies are identified from the modified dataset by analyzing the axial images. Detected anomalies are classified as potential polyps or natural features using 3D morphological techniques. The final results are flagged for review. The system was evaluated using 15 scenarios. The sensitivity of the system was found to be 65% with 34% false positive detections. Automated diagnosis at CTC is possible and thorough testing is facilitated by augmenting real patient data with computer generated polyps. Ultimately, automated diagnosis will enhance standard CTC and increase performance.

Iron-oxide colloidal nanoclusters: from fundamental physical properties to diagnosis and therapy

NASA Astrophysics Data System (ADS)

Kostopoulou, Athanasia; Brintakis, Konstantinos; Lascialfari, Alessandro; Angelakeris, Mavroeidis; Vasilakaki, Marianna; Trohidou, Kalliopi; Douvalis, Alexios P.; Psycharakis, Stylianos; Ranella, Anthi; Manna, Liberato; Lappas, Alexandros

2014-03-01

Research on magnetic nanocrystals attracts wide-spread interest because of their challenging fundamental properties, but it is also driven by problems of practical importance to the society, ranging from electronics (e.g. magnetic recording) to biomedicine. In that respect, iron oxides are model functional materials as they adopt a variety of oxidation states and coordinations that facilitate their use. We show that a promising way to engineer further their technological potential in diagnosis and therapy is the assembly of primary nanocrystals into larger colloidal entities, possibly with increased structural complexity. In this context, elevated-temperature nanochemistry (c.f. based on a polyol approach) permitted us to develop size-tunable, low-cytotoxicity iron-oxide nanoclusters, entailing iso-oriented nanocrystals, with enhanced magnetization. Experimental (magnetometry, electron microscopy, Mössbauer and NMR spectroscopies) results supported by Monte Carlo simulations are reviewed to show that such assemblies of surface-functionalized iron oxide nanocrystals have a strong potential for innovation. The clusters' optimized magnetic anisotropy (including microscopic surface spin disorder) and weak ferrimagnetism at room temperature, while they do not undermine colloidal stability, endow them a profound advantage as efficient MRI contrast agents and hyperthermic mediators with important biomedical potential.

Automated software for analysis of ciliary beat frequency and metachronal wave orientation in primary ciliary dyskinesia.

PubMed

Mantovani, Giulia; Pifferi, Massimo; Vozzi, Giovanni

2010-06-01

Patients with primary ciliary dyskinesia (PCD) have structural and/or functional alterations of cilia that imply deficits in mucociliary clearance and different respiratory pathologies. A useful indicator for the difficult diagnosis is the ciliary beat frequency (CBF) that is significantly lower in pathological cases than in physiological ones. The CBF computation is not rapid, therefore, the aim of this study is to propose an automated method to evaluate it directly from videos of ciliated cells. The cells are taken from inferior nasal turbinates and videos of ciliary movements are registered and eventually processed by the developed software. The software consists in the extraction of features from videos (written with C++ language) and the computation of the frequency (written with Matlab language). This system was tested both on the samples of nasal cavity and software models, and the results were really promising because in a few seconds, it can compute a reliable frequency if compared with that measured with visual methods. It is to be noticed that the reliability of the computation increases with the quality of acquisition system and especially with the sampling frequency. It is concluded that the developed software could be a useful mean for PCD diagnosis.

A Computational Study of How Orientation Bias in the Lateral Geniculate Nucleus Can Give Rise to Orientation Selectivity in Primary Visual Cortex

PubMed Central

Kuhlmann, Levin; Vidyasagar, Trichur R.

2011-01-01

Controversy remains about how orientation selectivity emerges in simple cells of the mammalian primary visual cortex. In this paper, we present a computational model of how the orientation-biased responses of cells in lateral geniculate nucleus (LGN) can contribute to the orientation selectivity in simple cells in cats. We propose that simple cells are excited by lateral geniculate fields with an orientation-bias and disynaptically inhibited by unoriented lateral geniculate fields (or biased fields pooled across orientations), both at approximately the same retinotopic co-ordinates. This interaction, combined with recurrent cortical excitation and inhibition, helps to create the sharp orientation tuning seen in simple cell responses. Along with describing orientation selectivity, the model also accounts for the spatial frequency and length–response functions in simple cells, in normal conditions as well as under the influence of the GABAA antagonist, bicuculline. In addition, the model captures the response properties of LGN and simple cells to simultaneous visual stimulation and electrical stimulation of the LGN. We show that the sharp selectivity for stimulus orientation seen in primary visual cortical cells can be achieved without the excitatory convergence of the LGN input cells with receptive fields along a line in visual space, which has been a core assumption in classical models of visual cortex. We have also simulated how the full range of orientations seen in the cortex can emerge from the activity among broadly tuned channels tuned to a limited number of optimum orientations, just as in the classical case of coding for color in trichromatic primates. PMID:22013414

Cardinal rules: Visual orientation perception reflects knowledge of environmental statistics

PubMed Central

Girshick, Ahna R.; Landy, Michael S.; Simoncelli, Eero P.

2011-01-01

Humans are remarkably good at performing visual tasks, but experimental measurements reveal substantial biases in the perception of basic visual attributes. An appealing hypothesis is that these biases arise through a process of statistical inference, in which information from noisy measurements is fused with a probabilistic model of the environment. But such inference is optimal only if the observer’s internal model matches the environment. Here, we provide evidence that this is the case. We measured performance in an orientation-estimation task, demonstrating the well-known fact that orientation judgements are more accurate at cardinal (horizontal and vertical) orientations, along with a new observation that judgements made under conditions of uncertainty are strongly biased toward cardinal orientations. We estimate observers’ internal models for orientation and find that they match the local orientation distribution measured in photographs. We also show how a neural population could embed probabilistic information responsible for such biases. PMID:21642976

Origin and Function of Tuning Diversity in Macaque Visual Cortex

PubMed Central

Goris, Robbe L.T.; Simoncelli, Eero P.; Movshon, J. Anthony

2016-01-01

SUMMARY Neurons in visual cortex vary in their orientation selectivity. We measured responses of V1 and V2 cells to orientation mixtures and fit them with a model whose stimulus selectivity arises from the combined effects of filtering, suppression, and response nonlinearity. The model explains the diversity of orientation selectivity with neuron-to-neuron variability in all three mechanisms, of which variability in the orientation bandwidth of linear filtering is the most important. The model also accounts for the cells’ diversity of spatial frequency selectivity. Tuning diversity is matched to the needs of visual encoding. The orientation content found in natural scenes is diverse, and neurons with different selectivities are adapted to different stimulus configurations. Single orientations are better encoded by highly selective neurons, while orientation mixtures are better encoded by less selective neurons. A diverse population of neurons therefore provides better overall discrimination capabilities for natural images than any homogeneous population. PMID:26549331

Obtaining short-fiber orientation model parameters using non-lubricated squeeze flow

NASA Astrophysics Data System (ADS)

Lambert, Gregory; Wapperom, Peter; Baird, Donald

2017-12-01

Accurate models of fiber orientation dynamics during the processing of polymer-fiber composites are needed for the design work behind important automobile parts. All of the existing models utilize empirical parameters, but a standard method for obtaining them independent of processing does not exist. This study considers non-lubricated squeeze flow through a rectangular channel as a solution. A two-dimensional finite element method simulation of the kinematics and fiber orientation evolution along the centerline of a sample is developed as a first step toward a fully three-dimensional simulation. The model is used to fit to orientation data in a short-fiber-reinforced polymer composite after squeezing. Fiber orientation model parameters obtained in this study do not agree well with those obtained for the same material during startup of simple shear. This is attributed to the vastly different rates at which fibers orient during shearing and extensional flows. A stress model is also used to try to fit to experimental closure force data. Although the model can be tuned to the correct magnitude of the closure force, it does not fully recreate the transient behavior, which is attributed to the lack of any consideration for fiber-fiber interactions.

Variables influencing food perception reviewed for consumer-oriented product development.

PubMed

Sijtsema, Siet; Linnemann, Anita; van Gaasbeek, Ton; Dagevos, Hans; Jongen, Wim

2002-01-01

Consumer wishes have to be translated into product characteristics to implement consumer-oriented product development. Before this step can be made, insight in food-related behavior and perception of consumers is necessary to make the right, useful, and successful translation. Food choice behavior and consumers' perception are studied in many disciplines. Models of food behavior and preferences therefore were studied from a multidisciplinary perspective. Nearly all models structure the determinants related to the person, the food, and the environment. Consequently, the overview of models was used as a basis to structure the variables influencing food perception into a model for consumer-oriented product development. To this new model, referred to as food perception model, other variables like time and place as part of consumption moment were added. These are important variables influencing consumers' perception, and therefore of increasing importance to consumer-oriented product development nowadays. In further research, the presented food perception model is used as a tool to implement successful consumer-oriented product development.

Contrast Gain Control Model Fits Masking Data

NASA Technical Reports Server (NTRS)

Watson, Andrew B.; Solomon, Joshua A.; Null, Cynthia H. (Technical Monitor)

1994-01-01

We studied the fit of a contrast gain control model to data of Foley (JOSA 1994), consisting of thresholds for a Gabor patch masked by gratings of various orientations, or by compounds of two orientations. Our general model includes models of Foley and Teo & Heeger (IEEE 1994). Our specific model used a bank of Gabor filters with octave bandwidths at 8 orientations. Excitatory and inhibitory nonlinearities were power functions with exponents of 2.4 and 2. Inhibitory pooling was broad in orientation, but narrow in spatial frequency and space. Minkowski pooling used an exponent of 4. All of the data for observer KMF were well fit by the model. We have developed a contrast gain control model that fits masking data. Unlike Foley's, our model accepts images as inputs. Unlike Teo & Heeger's, our model did not require multiple channels for different dynamic ranges.

Registering myocardial fiber orientations with heart geometry using iterative closest points algorithms

NASA Astrophysics Data System (ADS)

Deng, Dongdong; Jiao, Peifeng; Shou, Guofa; Xia, Ling

2009-10-01

Myocardial electrical excitation propagation is anisotropic, with the most rapid spread of current along the direction of the long axis of the fiber. Fiber orientation is also an important determinant of myocardial mechanics. So myocardial fiber orientations are very important to heart modeling and simulation. Accurately construction of myocardial fiber orientations, however, is still a challenge. The purpose of this paper is to construct a heart geometrical model with myocardial fiber orientations based on CT and 3D laser scanned pictures. The iterative closest points (ICP) algorithms were used to register the fiber orientations with the heart geometry.

Unified modeling language and design of a case-based retrieval system in medical imaging.

PubMed Central

LeBozec, C.; Jaulent, M. C.; Zapletal, E.; Degoulet, P.

1998-01-01

One goal of artificial intelligence research into case-based reasoning (CBR) systems is to develop approaches for designing useful and practical interactive case-based environments. Explaining each step of the design of the case-base and of the retrieval process is critical for the application of case-based systems to the real world. We describe herein our approach to the design of IDEM--Images and Diagnosis from Examples in Medicine--a medical image case-based retrieval system for pathologists. Our approach is based on the expressiveness of an object-oriented modeling language standard: the Unified Modeling Language (UML). We created a set of diagrams in UML notation illustrating the steps of the CBR methodology we used. The key aspect of this approach was selecting the relevant objects of the system according to user requirements and making visualization of cases and of the components of the case retrieval process. Further evaluation of the expressiveness of the design document is required but UML seems to be a promising formalism, improving the communication between the developers and users. Images Figure 6 Figure 7 PMID:9929346

Unified modeling language and design of a case-based retrieval system in medical imaging.

PubMed

LeBozec, C; Jaulent, M C; Zapletal, E; Degoulet, P

1998-01-01

One goal of artificial intelligence research into case-based reasoning (CBR) systems is to develop approaches for designing useful and practical interactive case-based environments. Explaining each step of the design of the case-base and of the retrieval process is critical for the application of case-based systems to the real world. We describe herein our approach to the design of IDEM--Images and Diagnosis from Examples in Medicine--a medical image case-based retrieval system for pathologists. Our approach is based on the expressiveness of an object-oriented modeling language standard: the Unified Modeling Language (UML). We created a set of diagrams in UML notation illustrating the steps of the CBR methodology we used. The key aspect of this approach was selecting the relevant objects of the system according to user requirements and making visualization of cases and of the components of the case retrieval process. Further evaluation of the expressiveness of the design document is required but UML seems to be a promising formalism, improving the communication between the developers and users.

Bullying victimisation and risk of psychotic phenomena: analyses of British national survey data.

PubMed

Catone, Gennaro; Marwaha, Steven; Kuipers, Elizabeth; Lennox, Belinda; Freeman, Daniel; Bebbington, Paul; Broome, Matthew

2015-07-01

Being bullied is an aversive experience with short-term and long-term consequences, and is incorporated in biopsychosocial models of psychosis. We used the 2000 and the 2007 British Adult Psychiatric Morbidity Surveys to test the hypothesis that bullying is associated with individual psychotic phenomena and with psychosis, and predicts the later emergence of persecutory ideation and hallucinations. We analysed two nationally representative surveys of individuals aged 16 years or older in Great Britain (2000) and England (2007). Respondents were presented with a card listing stressful events to identify experiences of bullying over the entire lifespan. We assessed associations with the dependent variables persecutory ideation, auditory and visual hallucinations, and diagnosis of probable psychosis. All analyses were controlled for sociodemographic confounders, intelligence quotient (IQ), and other traumas. We used data for 8580 respondents from 2000 and 7403 from 2007. Bullying was associated with presence of persecutory ideation and hallucinations, remaining so after adjustment for sociodemographic factors, IQ, other traumas, and childhood sexual abuse. Bullying was associated with a diagnosis of probable psychosis. If reported at baseline, bullying predicted emergence and maintenance of persecutory ideation and hallucinations during 18 months of follow-up in the 2000 survey. Controlling for other traumas and childhood sexual abuse did not affect the association between bullying and psychotic symptoms, but reduced the significance of the association with diagnosis of probable psychosis. Bullying was most strongly associated with the presence of concurrent persecutory ideation and hallucinations. Bullying victimisation increases the risk of individual psychotic symptoms and of a diagnosis of probable psychosis. Early detection of bullying and use of treatments oriented towards its psychological consequences might ameliorate the course of psychosis. None. Copyright © 2015 Elsevier Ltd. All rights reserved.

A regression-based 3-D shoulder rhythm.

PubMed

Xu, Xu; Lin, Jia-hua; McGorry, Raymond W

2014-03-21

In biomechanical modeling of the shoulder, it is important to know the orientation of each bone in the shoulder girdle when estimating the loads on each musculoskeletal element. However, because of the soft tissue overlying the bones, it is difficult to accurately derive the orientation of the clavicle and scapula using surface markers during dynamic movement. The purpose of this study is to develop two regression models which predict the orientation of the clavicle and the scapula. The first regression model uses humerus orientation and individual factors such as age, gender, and anthropometry data as the predictors. The second regression model includes only the humerus orientation as the predictor. Thirty-eight participants performed 118 static postures covering the volume of the right hand reach. The orientation of the thorax, clavicle, scapula and humerus were measured with a motion tracking system. Regression analysis was performed on the Euler angles decomposed from the orientation of each bone from 26 randomly selected participants. The regression models were then validated with the remaining 12 participants. The results indicate that for the first model, the r(2) of the predicted orientation of the clavicle and the scapula ranged between 0.31 and 0.65, and the RMSE obtained from the validation dataset ranged from 6.92° to 10.39°. For the second model, the r(2) ranged between 0.19 and 0.57, and the RMSE obtained from the validation dataset ranged from 6.62° and 11.13°. The derived regression-based shoulder rhythm could be useful in future biomechanical modeling of the shoulder. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Motivational Antecedents of Preventive Proactivity in Late Life: Linking Future Orientation and Exercise1

PubMed Central

Kahana, Eva; Kahana, Boaz; Zhang, Jianping

2007-01-01

Future orientation is considered as a motivational antecedent of late-life proactivity. In a panel study of 453 old-old adults, we linked future orientation to exercise, a key component of late-life proactivity. Findings based on hierarchical linear modeling reveal that future orientation at baseline predicts changes in exercise during the subsequent four years. Whereas exercise behavior generally declined over time, future orientation and female gender were associated with smaller decline. These results suggest that future-oriented thinking has a lasting impact on health promotion behavior. Future orientation thus represents a dispositional antecedent of preventive proactivity as proposed in our successful aging model. PMID:18080009

Experiences in teaching of modeling and simulation with emphasize on equation-based and acausal modeling techniques.

PubMed

Kulhánek, Tomáš; Ježek, Filip; Mateják, Marek; Šilar, Jan; Kofránek, Jří

2015-08-01

This work introduces experiences of teaching modeling and simulation for graduate students in the field of biomedical engineering. We emphasize the acausal and object-oriented modeling technique and we have moved from teaching block-oriented tool MATLAB Simulink to acausal and object oriented Modelica language, which can express the structure of the system rather than a process of computation. However, block-oriented approach is allowed in Modelica language too and students have tendency to express the process of computation. Usage of the exemplar acausal domains and approach allows students to understand the modeled problems much deeper. The causality of the computation is derived automatically by the simulation tool.

Constitutive Modeling of Nanotube/Polymer Composites with Various Nanotube Orientations

NASA Technical Reports Server (NTRS)

Odegard, Gregory M.; Gates, Thomas S.

2002-01-01

In this study, a technique has been proposed for developing constitutive models for polymer composite systems reinforced with single-walled carbon nanotubes (SWNT) with various orientations with respect to the bulk material coordinates. A nanotube, the local polymer adjacent to the nanotube, and the nanotube/polymer interface have been modeled as an equivalent-continuum fiber by using an equivalent-continuum modeling method. The equivalent-continuum fiber accounts for the local molecular structure and bonding information and serves as a means for incorporating micromechanical analyses for the prediction of bulk mechanical properties of SWNT/polymer composite. As an example, the proposed approach is used for the constitutive modeling of a SWNT/LaRC-SI (with a PmPV interface) composite system, with aligned nanotubes, three-dimensionally randomly oriented nanotubes, and nanotubes oriented with varying degrees of axisymmetry. It is shown that the Young s modulus is highly dependent on the SWNT orientation distribution.

Feasibility of observer system for determining orientation of balloon borne observational platforms

NASA Technical Reports Server (NTRS)

Nigro, N. J.; Gagliardi, J. C.

1982-01-01

An observer model for predicting the orientation of balloon borne research platforms was developed. The model was employed in conjunction with data from the LACATE mission in order to determine the platform orientation as a function of time.

Neural field model to reconcile structure with function in primary visual cortex.

PubMed

Rankin, James; Chavane, Frédéric

2017-10-01

Voltage-sensitive dye imaging experiments in primary visual cortex (V1) have shown that local, oriented visual stimuli elicit stable orientation-selective activation within the stimulus retinotopic footprint. The cortical activation dynamically extends far beyond the retinotopic footprint, but the peripheral spread stays non-selective-a surprising finding given a number of anatomo-functional studies showing the orientation specificity of long-range connections. Here we use a computational model to investigate this apparent discrepancy by studying the expected population response using known published anatomical constraints. The dynamics of input-driven localized states were simulated in a planar neural field model with multiple sub-populations encoding orientation. The realistic connectivity profile has parameters controlling the clustering of long-range connections and their orientation bias. We found substantial overlap between the anatomically relevant parameter range and a steep decay in orientation selective activation that is consistent with the imaging experiments. In this way our study reconciles the reported orientation bias of long-range connections with the functional expression of orientation selective neural activity. Our results demonstrate this sharp decay is contingent on three factors, that long-range connections are sufficiently diffuse, that the orientation bias of these connections is in an intermediate range (consistent with anatomy) and that excitation is sufficiently balanced by inhibition. Conversely, our modelling results predict that, for reduced inhibition strength, spurious orientation selective activation could be generated through long-range lateral connections. Furthermore, if the orientation bias of lateral connections is very strong, or if inhibition is particularly weak, the network operates close to an instability leading to unbounded cortical activation.

Development and matching of binocular orientation preference in mouse V1

PubMed Central

Bhaumik, Basabi; Shah, Nishal P.

2014-01-01

Eye-specific thalamic inputs converge in the primary visual cortex (V1) and form the basis of binocular vision. For normal binocular perceptions, such as depth and stereopsis, binocularly matched orientation preference between the two eyes is required. A critical period of binocular matching of orientation preference in mice during normal development is reported in literature. Using a reaction diffusion model we present the development of RF and orientation selectivity in mouse V1 and investigate the binocular orientation preference matching during the critical period. At the onset of the critical period the preferred orientations of the modeled cells are mostly mismatched in the two eyes and the mismatch decreases and reaches levels reported in juvenile mouse by the end of the critical period. At the end of critical period 39% of cells in binocular zone in our model cortex is orientation selective. In literature around 40% cortical cells are reported as orientation selective in mouse V1. The starting and the closing time for critical period determine the orientation preference alignment between the two eyes and orientation tuning in cortical cells. The absence of near neighbor interaction among cortical cells during the development of thalamo-cortical wiring causes a salt and pepper organization in the orientation preference map in mice. It also results in much lower % of orientation selective cells in mice as compared to ferrets and cats having organized orientation maps with pinwheels. PMID:25104927

On the Selection of Non-Invasive Methods Based on Speech Analysis Oriented to Automatic Alzheimer Disease Diagnosis

PubMed Central

López-de-Ipiña, Karmele; Alonso, Jesus-Bernardino; Travieso, Carlos Manuel; Solé-Casals, Jordi; Egiraun, Harkaitz; Faundez-Zanuy, Marcos; Ezeiza, Aitzol; Barroso, Nora; Ecay-Torres, Miriam; Martinez-Lage, Pablo; de Lizardui, Unai Martinez

2013-01-01

The work presented here is part of a larger study to identify novel technologies and biomarkers for early Alzheimer disease (AD) detection and it focuses on evaluating the suitability of a new approach for early AD diagnosis by non-invasive methods. The purpose is to examine in a pilot study the potential of applying intelligent algorithms to speech features obtained from suspected patients in order to contribute to the improvement of diagnosis of AD and its degree of severity. In this sense, Artificial Neural Networks (ANN) have been used for the automatic classification of the two classes (AD and control subjects). Two human issues have been analyzed for feature selection: Spontaneous Speech and Emotional Response. Not only linear features but also non-linear ones, such as Fractal Dimension, have been explored. The approach is non invasive, low cost and without any side effects. Obtained experimental results were very satisfactory and promising for early diagnosis and classification of AD patients. PMID:23698268

Sexual Orientation Disparities in Sexually Transmitted Infections: Examining the Intersection Between Sexual Identity and Sexual Behavior

PubMed Central

Everett, Bethany G.

2013-01-01

The terms MSM (men who have sex with men) and WSW (women who have sex with women) have been used with increasing frequency in the public health literature to examine sexual orientation disparities in sexual health. These categories, however, do not allow researchers to examine potential differences in sexually transmitted infection (STI) risk by sexual orientation identity. Using data from the National Longitudinal Survey of Adolescent Health, this study investigated the relationship between self-reported STIs and both sexual orientation identity and sexual behaviors. Additionally, this study examined the mediating role of victimization and STI risk behaviors on the relationship between sexual orientation and self-reported STIs. STI risk was found to be elevated among heterosexual-WSW and bisexual women, whether they report same-sex partners or not, whereas gay-identified WSW were less likely to report an STI compared to heterosexual women with opposite sex relationships only. Among males, heterosexual-identified MSM did not have a greater likelihood of reporting an STI diagnosis; rather, STI risk was concentrated among gay and bisexual identified men who reported both male and female sexual partners. STI risk behaviors mediated the STI disparities among both males and females, and victimization partially mediated STI disparities among female participants. These results suggest that relying solely on behavior-based categories, such as MSM and WSW, may mischaracterize STI disparities by sexual orientation. PMID:22350122

Sexual orientation disparities in sexually transmitted infections: examining the intersection between sexual identity and sexual behavior.

PubMed

Everett, Bethany G

2013-02-01

The terms MSM (men who have sex with men) and WSW (women who have sex with women) have been used with increasing frequency in the public health literature to examine sexual orientation disparities in sexual health. These categories, however, do not allow researchers to examine potential differences in sexually transmitted infection (STI) risk by sexual orientation identity. Using data from the National Longitudinal Survey of Adolescent Health, this study investigated the relationship between self-reported STIs and both sexual orientation identity and sexual behaviors. Additionally, this study examined the mediating role of victimization and STI risk behaviors on the relationship between sexual orientation and self-reported STIs. STI risk was found to be elevated among heterosexual-WSW and bisexual women, whether they reported same-sex partners or not, whereas gay-identified WSW were less likely to report an STI compared to heterosexual women with opposite sex relationships only. Among males, heterosexual-identified MSM did not have a greater likelihood of reporting an STI diagnosis; rather, STI risk was concentrated among gay and bisexual identified men who reported both male and female sexual partners. STI risk behaviors mediated the STI disparities among both males and females, and victimization partially mediated STI disparities among female participants. These results suggest that relying solely on behavior-based categories, such as MSM and WSW, may mischaracterize STI disparities by sexual orientation.

Child's Positive and Negative Impacts on Parents--A Person-Oriented Approach to Understanding Temperament in Preschool Children with Intellectual Disabilities

ERIC Educational Resources Information Center

Bostrom, P. K.; Broberg, M.; Bodin, L.

2011-01-01

Background: Despite previous efforts to understand temperament in children with intellectual disability (ID), and how child temperament may affect parents, the approach has so far been unidimensional. Child temperament has been considered in relation to diagnosis, with the inherent risk of overlooking individual variation of children's temperament…

Patterns of Time Processing Ability in Children with and without Developmental Disabilities

ERIC Educational Resources Information Center

Janeslatt, Gunnel; Granlund, Mats; Kottorp, Anders; Almqvist, Lena

2010-01-01

Background: Children with developmental disabilities, e.g. intellectual disability or autism, are reported to have problems in time perception, time orientation or time management, i.e. in time-processing ability (TPA). The aim was to investigate whether the problems described are diagnosis specific or reflect differences in age or in level of…

A conceptual model of nurses' goal orientation, service behavior, and service performance.

PubMed

Chien, Chun-Cheng; Chou, Hsin-Kai; Hung, Shuo-Tsung

2008-01-01

Based on the conceptual framework known as the "service triangle," the authors constructed a model of nurses' goal orientation, service behavior, and service performance to investigate the antecedents and consequences of the medical service behavior provided by nurses. This cross-sectional study collected data from 127 nurses in six hospitals using a mail-in questionnaire. Analysis of the model revealed that the customer-oriented behavior of nurses had a positive influence on organizational citizenship behavior; and both of these behaviors had a significant positive influence on service performance. The results also indicate that a higher learning goal orientation among nurses was associated with the performance of both observable customer-oriented behavior and organizational-citizenship behavior.

Intraoperative assisting diagnosis of esophageal submucosal cancer using multiphoton microscopy

NASA Astrophysics Data System (ADS)

Zeng, Yaping; Xu, Jian; Zhou, Qun; Kang, Deyong; Zhuo, Shuangmu; Zhu, Xiaoqin; Lin, Jiangbo; Chen, Jianxin

2018-07-01

Multiphoton microscopy (MPM) based on two-photon excited fluorescence and second harmonic generation can achieve high-resolution images of biological tissues at the cellular and subcellular levels. In this work, we used MPM imaging of intraoperative hematoxylin and eosin (H&E)-stained frozen sections (FSs) of esophagus to explore whether MPM can provide complementary information to the auxiliary diagnosis of esophageal submucosal cancer during the intraoperative period. It was found that MPM has the ability not only to clearly reveal biological tissue microstructure and its morphological changes, but can reveal information not distinguishable in H&E-stained images. The complementary information of nonlinear spectral analysis, orientation and morphology changes in the collagen showed that MPM has important accessory diagnostic value for the differential diagnosis of submucosal carcinoma of the esophagus during the intraoperative period.

Description and status update on GELLO: a proposed standardized object-oriented expression language for clinical decision support.

PubMed

Sordo, Margarita; Boxwala, Aziz A; Ogunyemi, Omolola; Greenes, Robert A

2004-01-01

A major obstacle to sharing computable clinical knowledge is the lack of a common language for specifying expressions and criteria. Such a language could be used to specify decision criteria, formulae, and constraints on data and action. Al-though the Arden Syntax addresses this problem for clinical rules, its generalization to HL7's object-oriented data model is limited. The GELLO Expression language is an object-oriented language used for expressing logical conditions and computations in the GLIF3 (GuideLine Interchange Format, v. 3) guideline modeling language. It has been further developed under the auspices of the HL7 Clinical Decision Support Technical Committee, as a proposed HL7 standard., GELLO is based on the Object Constraint Language (OCL), because it is vendor-independent, object-oriented, and side-effect-free. GELLO expects an object-oriented data model. Although choice of model is arbitrary, standardization is facilitated by ensuring that the data model is compatible with the HL7 Reference Information Model (RIM).

Self-Reported Mental Disorders and Distress by Sexual Orientation

PubMed Central

Przedworski, Julia M.; VanKim, Nicole A.; Eisenberg, Marla E.; McAlpine, Donna D.; Lust, Katherine A.; Laska, Melissa N.

2015-01-01

Introduction Sexual minority college students (i.e., those not identifying as heterosexual, or those reporting same-sex sexual activity) may be at increased risk of poor mental health, given factors such as minority stress, stigma, and discrimination. Such disparities could have important implications for students’ academic achievement, future health, and social functioning. This study compares reports of mental disorder diagnoses, stressful life events, and frequent mental distress across five gender-stratified sexual orientation categories. Methods Data were from the 2007–2011 College Student Health Survey, which surveyed a random sample of college students (N=34,324) at 40 Minnesota institutions. Data analysis was conducted in 2013–2014. The prevalence of mental disorder diagnoses, frequent mental distress, and stressful life events were calculated for heterosexual, discordant heterosexual, gay or lesbian, bisexual, and unsure students. Logistic regression models were fit to estimate the association between sexual orientation and mental health outcomes. Results Lesbian, gay, and bisexual students were more likely to report any mental health disorder diagnosis than heterosexual students (p<0.05). Lesbian, gay, bisexual, and unsure students were significantly more likely to report frequent mental distress compared to heterosexual students (OR range, 1.6–2.7). All sexual minority groups, with the exception of unsure men, had significantly greater odds of experiencing two or more stressful life events (OR range, 1.3–2.8). Conclusions Sexual minority college students experience worse mental health than their heterosexual peers. These students may benefit from interventions that target the structural and social causes of these disparities, and individual-level interventions that consider their unique life experiences. PMID:25997903

Sclerodermatomyositis, ocular manifestations.

PubMed

Pedroza-Seres, M; Serna-Ojeda, J C; Flores-Suárez, L F

2017-07-01

Sclerodermatomyositis is an overlap syndrome of myositis and scleroderma, with dermatological, muscular and joint involvement, but may also present with ocular manifestations. A 57 year-old woman presented with ophthalmological manifestations, including scleral thinning 360°, and the presence of cells in the anterior and posterior chamber. Oriented physical examination and laboratory studies led to the diagnosis, with the need for systemic treatment. Sclerodermatomyositis is a rare disease. Its diagnosis needs thorough clinical and laboratory studies, and its management should be multidisciplinary when inflammatory ocular manifestations may be present. Copyright © 2016 Sociedad Española de Oftalmología. Publicado por Elsevier España, S.L.U. All rights reserved.

Long-term pruritus as the initial and sole clinical manifestation of occult Hodgkin's disease.

PubMed

Omidvari, Shapour H; Khojasteh, Habib Noorani; Mohammadianpanah, Mohammad; Monabati, Ahmad; Mosalaei, Ahmad; Ahmadloo, Niloofar

2004-06-01

Pruritus or itch is a frequent symptom of patients with Hodgkin's disease. It often occurs during the clinical course of the disease and rarely may precede the diagnosis of underlying disease. In this report, we present a 16-year-old patient who had history of generalized pruritus without any skin rash for 4 years before the diagnosis of Hodgkin's disease. Within that period, she had received symptom-oriented medications, with no significant effect. After the first cycle of chemotherapy, her pruritus resolved completely. This case suggests that long-term generalized pruritus may be indicative of a significant underlying problem like Hodgkin's disease.

Variations in Titan's dune orientations as a result of orbital forcing

NASA Astrophysics Data System (ADS)

McDonald, George D.; Hayes, Alexander G.; Ewing, Ryan C.; Lora, Juan M.; Newman, Claire E.; Tokano, Tetsuya; Lucas, Antoine; Soto, Alejandro; Chen, Gang

2016-05-01

Wind-blown dunes are a record of the climatic history in Titan's equatorial region. Through modeling of the climatic conditions associated with Titan's historical orbital configurations (arising from apsidal precessions of Saturn's orbit), we present evidence that the orientations of the dunes are influenced by orbital forcing. Analysis of 3 Titan general circulation models (GCMs) in conjunction with a sediment transport model provides the first direct intercomparison of results from different Titan GCMs. We report variability in the dune orientations predicted for different orbital epochs of up to 70°. Although the response of the GCMs to orbital forcing varies, the orbital influence on the dune orientations is found to be significant across all models. Furthermore, there is near agreement among the two models run with surface topography, with 3 out of the 5 dune fields matching observation for the most recent orbital cycle. Through comparison with observations by Cassini, we find situations in which the observed dune orientations are in best agreement with those modeled for previous orbital configurations or combinations thereof, representing a larger portion of the cycle. We conclude that orbital forcing could be an important factor in governing the present-day dune orientations observed on Titan and should be considered when modeling dune evolution.

Proceedings of the First Workshop on Service-Oriented Architectures and Software Product Lines

DTIC Science & Technology

2008-05-01

Addison-Wesley, Har- low, 2000. [8] Kang, K., Cohen, S., Hess, J., Novak, W., & Peterson, S. Feature-Oriented Domain Analysis ( FODA ) Feasibility...Intensive Systems-Description, 2000. [17] K. Kang, S. Cohen, J. Hess, W. No- vak, and S. Peterson. Feature- Oriented Domain Analysis ( FODA ...product models. SPF modeling employs many approaches such as Feature- Oriented Domain Analysis and extensions to existing approaches such as UML

Molecular orientation distributions during injection molding of liquid crystalline polymers: Ex situ investigation of partially filled moldings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fang, Jun; Burghardt, Wesley R.; Bubeck, Robert A.

The development of molecular orientation in thermotropic liquid crystalline polymers (TLCPs) during injection molding has been investigated using two-dimensional wide-angle X-ray scattering coordinated with numerical computations employing the Larson-Doi polydomain model. Orientation distributions were measured in 'short shot' moldings to characterize structural evolution prior to completion of mold filling, in both thin and thick rectangular plaques. Distinct orientation patterns are observed near the filling front. In particular, strong extension at the melt front results in nearly transverse molecular alignment. Far away from the flow front shear competes with extension to produce complex spatial distributions of orientation. The relative influence ofmore » shear is stronger in the thin plaque, producing orientation along the filling direction. Exploiting an analogy between the Larson-Doi model and a fiber orientation model, we test the ability of process simulation tools to predict TLCP orientation distributions during molding. Substantial discrepancies between model predictions and experimental measurements are found near the flow front in partially filled short shots, attributed to the limits of the Hele-Shaw approximation used in the computations. Much of the flow front effect is however 'washed out' by subsequent shear flow as mold filling progresses, leading to improved agreement between experiment and corresponding numerical predictions.« less

Aspect-Oriented Model-Driven Software Product Line Engineering

NASA Astrophysics Data System (ADS)

Groher, Iris; Voelter, Markus

Software product line engineering aims to reduce development time, effort, cost, and complexity by taking advantage of the commonality within a portfolio of similar products. The effectiveness of a software product line approach directly depends on how well feature variability within the portfolio is implemented and managed throughout the development lifecycle, from early analysis through maintenance and evolution. This article presents an approach that facilitates variability implementation, management, and tracing by integrating model-driven and aspect-oriented software development. Features are separated in models and composed of aspect-oriented composition techniques on model level. Model transformations support the transition from problem to solution space models. Aspect-oriented techniques enable the explicit expression and modularization of variability on model, template, and code level. The presented concepts are illustrated with a case study of a home automation system.

Optimal estimator model for human spatial orientation

NASA Technical Reports Server (NTRS)

Borah, J.; Young, L. R.; Curry, R. E.

1979-01-01

A model is being developed to predict pilot dynamic spatial orientation in response to multisensory stimuli. Motion stimuli are first processed by dynamic models of the visual, vestibular, tactile, and proprioceptive sensors. Central nervous system function is then modeled as a steady-state Kalman filter which blends information from the various sensors to form an estimate of spatial orientation. Where necessary, this linear central estimator has been augmented with nonlinear elements to reflect more accurately some highly nonlinear human response characteristics. Computer implementation of the model has shown agreement with several important qualitative characteristics of human spatial orientation, and it is felt that with further modification and additional experimental data the model can be improved and extended. Possible means are described for extending the model to better represent the active pilot with varying skill and work load levels.

An Investigation of the Connection between Outdoor Orientation and Thriving

ERIC Educational Resources Information Center

Rude, Wally James; Bobilya, Andrew J.; Bell, Brent J.

2017-01-01

This study explored the contribution of outdoor orientation experiences to student thriving. Participants included 295 first-year college students from three institutions across North America. A thriving model was tested using structural equation modeling and included the following variables: outdoor orientation, thriving, involvement,…

The Role of Goal Orientation in Leadership Development

ERIC Educational Resources Information Center

DeGeest, David; Brown, Kenneth G.

2011-01-01

Goal-orientation theory and research offer a lens to better understand the mechanisms of experiential learning in developmental assignments for managers. This study presents a research model that depicts how goal orientations influence the development of leadership skills from experience. The model indicates how individual and situational…

Heterogeneous nucleation of polymorphs on polymer surfaces: polymer-molecule interactions using a Coulomb and van der Waals model.

PubMed

Wahlberg, Nanna; Madsen, Anders Ø; Mikkelsen, Kurt V

2018-06-09

The nucleation processes of acetaminophen on poly(methyl methacrylate) and poly(vinyl acetate) have been investigated and the mechanisms of the processes are studied. This is achieved by a combination of theoretical models and computational investigations within the framework of a modified QM/MM method; a Coulomb-van der Waals model. We have combined quantum mechanical computations and electrostatic models at the atomistic level for investigating the stability of different orientations of acetaminophen on the polymer surfaces. Based on the Coulomb-van der Waals model, we have determined the most stable orientation to be a flat orientation, and the strongest interaction is seen between poly(vinyl acetate) and the molecule in a flat orientation in vacuum.

Orofacial pain: a guide for the headache physician.

PubMed

Shephard, Martina K; Macgregor, E Anne; Zakrzewska, Joanna M

2014-01-01

Orofacial pain represents a significant burden in terms of morbidity and health service utilization. It includes very common disorders such as toothache and temporomandibular disorders, as well as rare orofacial pain syndromes. Many orofacial pain conditions have overlapping presentations, and diagnostic uncertainty is frequently encountered in clinical practice. This review provides a clinically orientated overview of common and uncommon orofacial pain presentations and diagnoses, with an emphasis on conditions that may be unfamiliar to the headache physician. A holistic approach to orofacial pain management is important, and the social, cultural, psychological and cognitive context of each patient needs to be considered in the process of diagnostic formulation, as well as in the development of a pain management plan according to the biopsychosocial model. Recognition of psychological comorbidities will assist in diagnosis and management planning. © 2013 American Headache Society.

Development towards Compact Nitrocellulose-Based Interferometric Biochips for Dry Eye MMP9 Label-Free In-Situ Diagnosis

PubMed Central

Santamaría, Beatriz; Laguna, María F.; López-Romero, David; Hernandez, Ana L.; Sanza, Francisco J.; Lavín, Álvaro; Casquel, Rafael; Maigler, María V.; Espinosa, Rocío L.; Holgado, Miguel

2017-01-01

A novel compact optical biochip based on a thin layer-sensing surface of nitrocellulose is used for in-situ label-free detection of metalloproteinase (MMP9) related to dry eye disease. In this article, a new integrated chip with different interferometric transducers layout with an optimal sensing surface is reported for the first time. We demonstrate that specific antibodies can be immobilized onto these transducers with a very low volume of sample and with good orientation. Many sensing transducers constitute the presented biochip in order to yield statistical data and stability in the acquired measurements. As a result, we report the recognition curve for pure recombinant MMP9, tests of model tears with MMP9, and real tear performance from patients, with a promising limit of detection. PMID:28534808

The Effect of Molecular Orientation to Solid-Solid and Melting Transitions

NASA Astrophysics Data System (ADS)

Yazici, Mustafa; Özgan, Şükrü

The thermodynamics of solid-solid and solid-liquid transitions are investigated with an account of the number of molecular orientation. The variations of the positional and orientational orders with the reduced temperature are studied. It is found out that orientational order parameter is very sensitive to the number of allowed orientation. The reduced transition temperatures, volume changes and entropy changes of the phase transitions and theoretical phase diagrams are obtained. The entropy changes of melting transitions for different numbers of allowed orientation of the present model are compared with the theoretical results and some experimental data. The quantitative predictions of the model are compared with experimental results for plastic crystals and agreement between predictions of the model and the experimental results are approximately good. Also, different numbers of allowed orientation D correspond to different experimental results HI, HBr, H2S for D = 2; HBr, CCl4, HI for D = 4; C2H12 for D = 6; CH4, PH3 for D = 20.

Origin and Function of Tuning Diversity in Macaque Visual Cortex.

PubMed

Goris, Robbe L T; Simoncelli, Eero P; Movshon, J Anthony

2015-11-18

Neurons in visual cortex vary in their orientation selectivity. We measured responses of V1 and V2 cells to orientation mixtures and fit them with a model whose stimulus selectivity arises from the combined effects of filtering, suppression, and response nonlinearity. The model explains the diversity of orientation selectivity with neuron-to-neuron variability in all three mechanisms, of which variability in the orientation bandwidth of linear filtering is the most important. The model also accounts for the cells' diversity of spatial frequency selectivity. Tuning diversity is matched to the needs of visual encoding. The orientation content found in natural scenes is diverse, and neurons with different selectivities are adapted to different stimulus configurations. Single orientations are better encoded by highly selective neurons, while orientation mixtures are better encoded by less selective neurons. A diverse population of neurons therefore provides better overall discrimination capabilities for natural images than any homogeneous population. Copyright © 2015 Elsevier Inc. All rights reserved.

Radiation-Induced Organizing Pneumonia: A Characteristic Disease that Requires Symptom-Oriented Management.

PubMed

Otani, Keisuke; Seo, Yuji; Ogawa, Kazuhiko

2017-01-27

Radiation-induced organizing pneumonia (RIOP) is an inflammatory lung disease that is occasionally observed after irradiation to the breast. It is a type of secondary organizing pneumonia that is characterized by infiltrates outside the irradiated volume that are sometimes migratory. Corticosteroids work acutely, but relapse of pneumonia is often experienced. Management of RIOP should simply be symptom-oriented, and the use of corticosteroids should be limited to severe symptoms from the perspective not only of cost-effectiveness but also of cancer treatment. Once steroid therapy is started, it takes a long time to stop it due to frequent relapses. We review RIOP from the perspective of its diagnosis, epidemiology, molecular pathogenesis, and patient management.

Contribution of parents' adult attachment and separation attitudes to parent-adolescent conflict resolution.

PubMed

García-Ruiz, Marta; Rodrigo, María José; Hernández-Cabrera, Juan A; Máiquez, María Luisa

2013-12-01

This study examined the contribution to parent-adolescent conflict resolution of parental adult attachment styles and attitudes toward adolescent separation. Questionnaires were completed by 295 couples with early to late adolescent children. Structural equation models were used to test self and partner influences on conflict resolution for three attachment orientations: confidence (model A), anxiety (model B) and avoidance (model C). Model A showed self influences between parents' confidence orientation and negotiation and also via positive attitudes towards separation. Also, the fathers' use of negotiation was facilitated by the mothers' confidence orientation and vice versa, indicating partner influences as well. Model B showed self influences between parents' anxiety orientation and the use of dominance and withdrawal and also via negative attitudes towards separation. Model C showed self influences between parents' avoidance orientation and dominance and withdrawal, and a partner influence between fathers' avoidance and mothers' use of dominance. The results indicated that the parents' adult attachment system and the parenting system were related in the area of conflict resolution, and that self influences were stronger than partner influences. © 2013 The Scandinavian Psychological Associations.

[Orientation hypercolumns of the visual cortex: ring model].

PubMed

Smirnova, E Iu; Chizhov, A V

2011-01-01

A hypercolumn of the visual cortex is a functional unit formed of the neighbouring columns whose neurons respond to a stimulus of particular orientation. The function of the hypercolumn is to amplify the orientation tuning of visually evoked responses. According to the conventional simple model of a hypercolumn, neuronal populations with different orientation preferences are distributed on a ring. Every population is described by the frequency (FR) model. To determine the limitations of the FR-ring model, it was compared with a more detailed ring model, which takes into account the distribution of neurons of each population according to their voltage values. In the case of the leaky integrate-and-fire neurons, every neural population is described by the Fokker-Planck (FP) equation. The mapping of parameters was obtained. The simulations revealed differences in the behaviour of the two models. Contrary to the FR model, the model based on the Fokker-Planck equation reacts faster to a change in stimulus orientation. The Fokker-Planck ring model gives a steady-state solution in the form of waves of activity travelling on the ring, whereas the FR ring model presents amplitude instability for the same parameter set. The FR ring model reproduces the characteristic effects of the ring model: the virtual rotation and the symmetry breaking.

Redesigning Orientation in an Intensive Care Unit Using 2 Theoretical Models.

PubMed

Kozub, Elizabeth; Hibanada-Laserna, Maribel; Harget, Gwen; Ecoff, Laurie

2015-01-01

To accommodate a higher demand for critical care nurses, an orientation program in a surgical intensive care unit was revised and streamlined. Two theoretical models served as a foundation for the revision and resulted in clear clinical benchmarks for orientation progress evaluation. The purpose of the project was to integrate theoretical frameworks into practice to improve the unit orientation program. Performance improvement methods served as a framework for the revision, and outcomes were measured before and after implementation. The revised orientation program increased 1- and 2-year nurse retention and decreased turnover. Critical care knowledge increased after orientation for both the preintervention and postintervention groups. Incorporating a theoretical basis for orientation has been shown to be successful in increasing the number of nurses completing orientation and improving retention, turnover rates, and knowledge gained.

A Rationale for Participant Evaluation

ERIC Educational Resources Information Center

Boody, Robert M.

2009-01-01

There are many different models or approaches to doing program evaluation. Fitzpatrick, Sanders, and Worthen classify them into five general approaches: (a) objectives oriented, (b) management oriented, (c) consumer oriented, (d) expertise oriented, and (e) participant oriented. Within each of these general categories, of course, reside many…

Relationship between weight-related behavioral profiles and health outcomes by sexual orientation and gender.

PubMed

VanKim, Nicole A; Erickson, Darin J; Eisenberg, Marla E; Lust, Katherine; Rosser, B R Simon; Laska, Melissa N

2016-07-01

Examine relationships between weight-related factors and weight status, body dissatisfaction, chronic health conditions, and quality of life across sexual orientation and gender. Two- and four-year college students participated in the College Student Health Survey (n = 28,703; 2009-2013). Risk differences were calculated to estimate relationships between behavioral profiles and weight status, body satisfaction, diagnosis of a chronic condition, and quality of life, stratified by gender and sexual orientation. Four behavioral profiles, characterized as "healthier eating habits, more physically active," "healthier eating habits," "moderate eating habits," and "unhealthy weight control," were utilized based on latent class analyses, estimated from nine weight-related behavioral survey items. Sexual orientation differences in weight and quality of life were identified. For example, sexual minority groups reported significantly poorer quality of life than their heterosexual counterparts (females: 22.5%-38.6% (sexual minority) vs. 19.8% (heterosexual); males: 14.3%-26.7% (sexual minority) vs. 11.8% (heterosexual)). Compared with the "healthier eating habits, more physically active" profile, the "unhealthy weight control" profile was associated with obesity, poor body satisfaction, and poor quality of life in multiple gender/sexual orientation subgroups. Interventions are needed to address obesity, body dissatisfaction, and poor quality of life among sexual minority college students. © 2016 The Obesity Society.

Object Oriented Modeling and Design

NASA Technical Reports Server (NTRS)

Shaykhian, Gholam Ali

2007-01-01

The Object Oriented Modeling and Design seminar is intended for software professionals and students, it covers the concepts and a language-independent graphical notation that can be used to analyze problem requirements, and design a solution to the problem. The seminar discusses the three kinds of object-oriented models class, state, and interaction. The class model represents the static structure of a system, the state model describes the aspects of a system that change over time as well as control behavior and the interaction model describes how objects collaborate to achieve overall results. Existing knowledge of object oriented programming may benefit the learning of modeling and good design. Specific expectations are: Create a class model, Read, recognize, and describe a class model, Describe association and link, Show abstract classes used with multiple inheritance, Explain metadata, reification and constraints, Group classes into a package, Read, recognize, and describe a state model, Explain states and transitions, Read, recognize, and describe interaction model, Explain Use cases and use case relationships, Show concurrency in activity diagram, Object interactions in sequence diagram.

Object-Oriented Dynamic Bayesian Network-Templates for Modelling Mechatronic Systems

DTIC Science & Technology

2002-05-04

daimlerchrysler.com Abstract are widespread. For modelling mechanical systems The object-oriented paradigma is a new but proven technol- ADAMS [31 or...hardware (sub-)systems. On the Software side thermal flow or hydraulics, see Figure 1. It also contains a the object-oriented paradigma is by now (at

A Model of Parental Achievement-Oriented Psychological Control in Academically Gifted Students

ERIC Educational Resources Information Center

Garn, Alex C.; Jolly, Jennifer L.

2015-01-01

This study investigated achievement-oriented parent socialization as it pertains to school avoidance in a sample of gifted students. A serial mediation model examining relationships among parental achievement-oriented psychological control (APC), fear of academic failure, academic amotivation, and school avoidance was tested. The sample included…

Model-based diagnosis through Structural Analysis and Causal Computation for automotive Polymer Electrolyte Membrane Fuel Cell systems

NASA Astrophysics Data System (ADS)

Polverino, Pierpaolo; Frisk, Erik; Jung, Daniel; Krysander, Mattias; Pianese, Cesare

2017-07-01

The present paper proposes an advanced approach for Polymer Electrolyte Membrane Fuel Cell (PEMFC) systems fault detection and isolation through a model-based diagnostic algorithm. The considered algorithm is developed upon a lumped parameter model simulating a whole PEMFC system oriented towards automotive applications. This model is inspired by other models available in the literature, with further attention to stack thermal dynamics and water management. The developed model is analysed by means of Structural Analysis, to identify the correlations among involved physical variables, defined equations and a set of faults which may occur in the system (related to both auxiliary components malfunctions and stack degradation phenomena). Residual generators are designed by means of Causal Computation analysis and the maximum theoretical fault isolability, achievable with a minimal number of installed sensors, is investigated. The achieved results proved the capability of the algorithm to theoretically detect and isolate almost all faults with the only use of stack voltage and temperature sensors, with significant advantages from an industrial point of view. The effective fault isolability is proved through fault simulations at a specific fault magnitude with an advanced residual evaluation technique, to consider quantitative residual deviations from normal conditions and achieve univocal fault isolation.

Exact solution of a model DNA-inversion genetic switch with orientational control.

PubMed

Visco, Paolo; Allen, Rosalind J; Evans, Martin R

2008-09-12

DNA inversion is an important mechanism by which bacteria and bacteriophage switch reversibly between phenotypic states. In such switches, the orientation of a short DNA element is flipped by a site-specific recombinase enzyme. We propose a simple model for a DNA-inversion switch in which recombinase production is dependent on the switch state (orientational control). Our model is inspired by the fim switch in E. coli. We present an exact analytical solution of the chemical master equation for the model switch, as well as stochastic simulations. Orientational control causes the switch to deviate from Poissonian behavior: the distribution of times in the on state shows a peak and successive flip times are correlated.

Systems, methods and apparatus for modeling, specifying and deploying policies in autonomous and autonomic systems using agent-oriented software engineering

NASA Technical Reports Server (NTRS)

Sterritt, Roy (Inventor); Hinchey, Michael G. (Inventor); Penn, Joaquin (Inventor)

2011-01-01

Systems, methods and apparatus are provided through which in some embodiments, an agent-oriented specification modeled with MaCMAS, is analyzed, flaws in the agent-oriented specification modeled with MaCMAS are corrected, and an implementation is derived from the corrected agent-oriented specification. Described herein are systems, method and apparatus that produce fully (mathematically) tractable development of agent-oriented specification(s) modeled with methodology fragment for analyzing complex multiagent systems (MaCMAS) and policies for autonomic systems from requirements through to code generation. The systems, method and apparatus described herein are illustrated through an example showing how user formulated policies can be translated into a formal mode which can then be converted to code. The requirements-based programming systems, method and apparatus described herein may provide faster, higher quality development and maintenance of autonomic systems based on user formulation of policies.

Modeling of magnetic particle orientation in magnetic powder injection molding

NASA Astrophysics Data System (ADS)

Doo Jung, Im; Kang, Tae Gon; Seul Shin, Da; Park, Seong Jin

2018-03-01

The magnetic micro powder orientation under viscous shear flow has been analytically understood and characterized into a new analytical orientation model for a powder injection molding process. The effects of hydrodynamic force from the viscous flow, external magnetic force and internal dipole-dipole interaction were considered to predict the orientation under given process conditions. Comparative studies with a finite element method proved the calculation validity with a partial differential form of the model. The angular motion, agglomeration and magnetic chain formation have been simulated, which shows that the effect of dipole-dipole interaction among powders on the orientation state becomes negligible at a high Mason number condition and at a low λ condition (the ratio of external magnetic field strength and internal magnetic moment of powder). Our developed model can be very usefully employed in the process analysis and design of magnetic powder injection molding.

Experimental study and modeling of atomic-scale friction in zigzag and armchair lattice orientations of MoS2.

PubMed

Li, Meng; Shi, Jialin; Liu, Lianqing; Yu, Peng; Xi, Ning; Wang, Yuechao

2016-01-01

Physical properties of two-dimensional materials, such as graphene, black phosphorus, molybdenum disulfide (MoS 2 ) and tungsten disulfide, exhibit significant dependence on their lattice orientations, especially for zigzag and armchair lattice orientations. Understanding of the atomic probe motion on surfaces with different orientations helps in the study of anisotropic materials. Unfortunately, there is no comprehensive model that can describe the probe motion mechanism. In this paper, we report a tribological study of MoS 2 in zigzag and armchair orientations. We observed a characteristic power spectrum and friction force values. To explain our results, we developed a modified, two-dimensional, stick-slip Tomlinson model that allows simulation of the probe motion on MoS 2 surfaces by combining the motion in the Mo layer and S layer. Our model fits well with the experimental data and provides a theoretical basis for tribological studies of two-dimensional materials.

A resource oriented webs service for environmental modeling

NASA Astrophysics Data System (ADS)

Ferencik, Ioan

2013-04-01

Environmental modeling is a largely adopted practice in the study of natural phenomena. Environmental models can be difficult to build and use and thus sharing them within the community is an important aspect. The most common approach to share a model is to expose it as a web service. In practice the interaction with this web service is cumbersome due to lack of standardized contract and the complexity of the model being exposed. In this work we investigate the use of a resource oriented approach in exposing environmental models as web services. We view a model as a layered resource build atop the object concept from Object Oriented Programming, augmented with persistence capabilities provided by an embedded object database to keep track of its state and implementing the four basic principles of resource oriented architectures: addressability, statelessness, representation and uniform interface. For implementation we use exclusively open source software: Django framework, dyBase object oriented database and Python programming language. We developed a generic framework of resources structured into a hierarchy of types and consequently extended this typology with recurses specific to the domain of environmental modeling. To test our web service we used cURL, a robust command-line based web client.

Group-oriented coordination models for distributed client-server computing

NASA Technical Reports Server (NTRS)

Adler, Richard M.; Hughes, Craig S.

1994-01-01

This paper describes group-oriented control models for distributed client-server interactions. These models transparently coordinate requests for services that involve multiple servers, such as queries across distributed databases. Specific capabilities include: decomposing and replicating client requests; dispatching request subtasks or copies to independent, networked servers; and combining server results into a single response for the client. The control models were implemented by combining request broker and process group technologies with an object-oriented communication middleware tool. The models are illustrated in the context of a distributed operations support application for space-based systems.

Aspect-Oriented Business Process Modeling with AO4BPMN

NASA Astrophysics Data System (ADS)

Charfi, Anis; Müller, Heiko; Mezini, Mira

Many crosscutting concerns in business processes need to be addressed already at the business process modeling level such as compliance, auditing, billing, and separation of duties. However, existing business process modeling languages including OMG's Business Process Modeling Notation (BPMN) lack appropriate means for expressing such concerns in a modular way. In this paper, we motivate the need for aspect-oriented concepts in business process modeling languages and propose an aspect-oriented extension to BPMN called AO4BPMN. We also present a graphical editor supporting that extension.

Refinement of the magnetic composite model of type 304 stainless steel by considering misoriented ferromagnetic martensite particles

NASA Astrophysics Data System (ADS)

Kinoshita, Katsuyuki

2017-05-01

We improved a magnetic composite model that combines the Jiles-Atherton model and Eshelby's equivalent inclusion method to consider misoriented martensite particles. The magnetic permeability of type 304 stainless steel were analyzed by using both experimental data on the orientation distribution of type 304 stainless steel specimens and the improved model. We found that the model is able to qualitatively explain the variation of permeability with the orientation angle and orientation distribution, an effect that depends on the direction of the excitation magnetic field.

A semi-empirical model for the complete orientation dependence of the growth rate for vapor phase epitaxy - Chloride VPE of GaAs

NASA Technical Reports Server (NTRS)

Seidel-Salinas, L. K.; Jones, S. H.; Duva, J. M.

1992-01-01

A semi-empirical model has been developed to determine the complete crystallographic orientation dependence of the growth rate for vapor phase epitaxy (VPE). Previous researchers have been able to determine this dependence for a limited range of orientations; however, our model yields relative growth rate information for any orientation. This model for diamond and zincblende structure materials is based on experimental growth rate data, gas phase diffusion, and surface reactions. Data for GaAs chloride VPE is used to illustrate the model. The resulting growth rate polar diagrams are used in conjunction with Wulff constructions to simulate epitaxial layer shapes as grown on patterned substrates. In general, this model can be applied to a variety of materials and vapor phase epitaxy systems.

A New Method for Conceptual Modelling of Information Systems

NASA Astrophysics Data System (ADS)

Gustas, Remigijus; Gustiene, Prima

Service architecture is not necessarily bound to the technical aspects of information system development. It can be defined by using conceptual models that are independent of any implementation technology. Unfortunately, the conventional information system analysis and design methods cover just a part of required modelling notations for engineering of service architectures. They do not provide effective support to maintain semantic integrity between business processes and data. Service orientation is a paradigm that can be applied for conceptual modelling of information systems. The concept of service is rather well understood in different domains. It can be applied equally well for conceptualization of organizational and technical information system components. This chapter concentrates on analysis of the differences between service-oriented modelling and object-oriented modelling. Service-oriented method is used for semantic integration of information system static and dynamic aspects.

Testing comprehensive models of disclosure of sexual orientation in HIV-positive Latino men who have sex with men (MSM).

PubMed

García, Luis I; Lechuga, Julia; Zea, María Cecilia

2012-01-01

Individuals who disclose their sexual orientation are more likely to also disclose their HIV status. Disclosure of HIV-serostatus is associated with better health outcomes. The goal of this study was to build and test comprehensive models of sexual orientation that included eight theory-informed predictors of disclosure to mothers, fathers, and closest friends in a sample of HIV-positive Latino gay and bisexual men. US acculturation, gender nonconformity to hegemonic masculinity in self-presentation, comfort with sexual orientation, gay community involvement, satisfaction with social support, sexual orientation and gender of the closest friend emerged as significant predictors of disclosure of sexual orientation.

Testing Comprehensive Models of Disclosure of Sexual Orientation in HIV-Positive Latino Men Who Have Sex with Men (MSM)

PubMed Central

Lechuga, Julia; Zea, María Cecilia

2012-01-01

Individuals who disclose their sexual orientation are more likely to also disclose their HIV status. Disclosure of HIV-serostatus is associated with better health outcomes. The goal of this study was to build and test comprehensive models of sexual orientation that included 8 theory-informed predictors of disclosure to mothers, fathers, and closest friends in a sample of HIV-positive Latino gay and bisexual men. US acculturation, gender non-conformity to hegemonic masculinity in self-presentation, comfort with sexual orientation, gay community involvement, satisfaction with social support, sexual orientation and gender of the closest friend emerged as significant predictors of disclosure of sexual orientation. PMID:22690708

Integration of the Gene Ontology into an object-oriented architecture.

PubMed

Shegogue, Daniel; Zheng, W Jim

2005-05-10

To standardize gene product descriptions, a formal vocabulary defined as the Gene Ontology (GO) has been developed. GO terms have been categorized into biological processes, molecular functions, and cellular components. However, there is no single representation that integrates all the terms into one cohesive model. Furthermore, GO definitions have little information explaining the underlying architecture that forms these terms, such as the dynamic and static events occurring in a process. In contrast, object-oriented models have been developed to show dynamic and static events. A portion of the TGF-beta signaling pathway, which is involved in numerous cellular events including cancer, differentiation and development, was used to demonstrate the feasibility of integrating the Gene Ontology into an object-oriented model. Using object-oriented models we have captured the static and dynamic events that occur during a representative GO process, "transforming growth factor-beta (TGF-beta) receptor complex assembly" (GO:0007181). We demonstrate that the utility of GO terms can be enhanced by object-oriented technology, and that the GO terms can be integrated into an object-oriented model by serving as a basis for the generation of object functions and attributes.

Integration of the Gene Ontology into an object-oriented architecture

PubMed Central

Shegogue, Daniel; Zheng, W Jim

2005-01-01

Background To standardize gene product descriptions, a formal vocabulary defined as the Gene Ontology (GO) has been developed. GO terms have been categorized into biological processes, molecular functions, and cellular components. However, there is no single representation that integrates all the terms into one cohesive model. Furthermore, GO definitions have little information explaining the underlying architecture that forms these terms, such as the dynamic and static events occurring in a process. In contrast, object-oriented models have been developed to show dynamic and static events. A portion of the TGF-beta signaling pathway, which is involved in numerous cellular events including cancer, differentiation and development, was used to demonstrate the feasibility of integrating the Gene Ontology into an object-oriented model. Results Using object-oriented models we have captured the static and dynamic events that occur during a representative GO process, "transforming growth factor-beta (TGF-beta) receptor complex assembly" (GO:0007181). Conclusion We demonstrate that the utility of GO terms can be enhanced by object-oriented technology, and that the GO terms can be integrated into an object-oriented model by serving as a basis for the generation of object functions and attributes. PMID:15885145

Object-oriented models of cognitive processing.

PubMed

Mather, G

2001-05-01

Information-processing models of vision and cognition are inspired by procedural programming languages. Models that emphasize object-based representations are closely related to object-oriented programming languages. The concepts underlying object-oriented languages provide a theoretical framework for cognitive processing that differs markedly from that offered by procedural languages. This framework is well-suited to a system designed to deal flexibly with discrete objects and unpredictable events in the world.

Effects and feasibility of a multi-disciplinary orientation program for newly registered cancer patients: design of a randomised controlled trial.

PubMed

Chan, Raymond; Webster, Joan; Bennett, Linda

2009-11-11

Diagnosis and treatment of cancer can contribute to psychological distress and anxiety amongst patients. Evidence indicates that information giving can be beneficial in reducing patient anxiety, so oncology specific information may have a major impact on this patient group. This study investigates the effects of an orientation program on levels of anxiety and self-efficacy amongst newly registered cancer patients who are about to undergo chemotherapy and/or radiation therapy in the cancer care centre of a large tertiary Australian hospital. The concept of interventions for orienting new cancer patients needs revisiting due to the dynamic health care system. Historically, most orientation programs at this cancer centre were conducted by one nurse. A randomised controlled trial has been designed to test the effectiveness of an orientation program with bundled interventions; a face-to-face program which includes introduction to the hospital facilities, introduction to the multi-disciplinary team and an overview of treatment side effects and self care strategies. The aim is to orientate patients to the cancer centre and to meet the health care team. We hypothesize that patients who receive this orientation will experience lower levels of anxiety and distress, and a higher level of self-efficacy. An orientation program is a common health care service provided by cancer care centres for new cancer patients. Such programs aim to give information to patients at the beginning of their encounter at a cancer care centre. It is clear in the literature that interventions that aim to improve self-efficacy in patients may demonstrate potential improvement in health outcomes. Yet, evidence on the effects of orientation programs for cancer patients on self-efficacy remains scarce, particularly with respect to the use of multidisciplinary team members. This paper presents the design of a randomised controlled trial that will evaluate the effects and feasibility of a multidisciplinary orientation program for new cancer patients. Current Controlled Trials ACTRN12609000018213.

Formal Methods for Automated Diagnosis of Autosub 6000

NASA Technical Reports Server (NTRS)

Ernits, Juhan; Dearden, Richard; Pebody, Miles

2009-01-01

This is a progress report on applying formal methods in the context of building an automated diagnosis and recovery system for Autosub 6000, an Autonomous Underwater Vehicle (AUV). The diagnosis task involves building abstract models of the control system of the AUV. The diagnosis engine is based on Livingstone 2, a model-based diagnoser originally built for aerospace applications. Large parts of the diagnosis model can be built without concrete knowledge about each mission, but actual mission scripts and configuration parameters that carry important information for diagnosis are changed for every mission. Thus we use formal methods for generating the mission control part of the diagnosis model automatically from the mission script and perform a number of invariant checks to validate the configuration. After the diagnosis model is augmented with the generated mission control component model, it needs to be validated using verification techniques.

DSM-5, ICD-10, ICD-11, the Psychodynamic Diagnostic Manual, and Person-Centered Integrative Diagnosis: An Overview for College Mental Health Therapists

ERIC Educational Resources Information Center

Cooper, Stewart E.

2014-01-01

Therapists in the field of college mental health counseling commonly voice an ambivalent orientation towards the utilization of formal psychological diagnostic systems yet often use diagnostic terms. Knowledge of the current and emerging diagnostic systems may contribute to greater syntheses of these differing approaches. This article will first…

Phototactic orientation mechanism in the ciliate Fabrea salina, as inferred from numerical simulations.

PubMed

Marangoni, R; Preosti, G; Colombetti, G

2000-02-01

The marine ciliate Fabrea salina shows a clear positive phototaxis, but the mechanism by which a single cell is able to detect the direction of light and orient its swimming accordingly is still unknown. A simple model of phototaxis is that of a biased random walk, where the bias due to light can affect one or more of the parameters that characterize a random walk, i.e., the mean speed, the frequency distribution of the angles of directional changes and the frequency of directional changes. Since experimental evidence has shown no effect of light on the mean speed of Fabrea salina, we have excluded models depending on this parameter. We have, therefore, investigated the phototactic orientation of Fabrea salina by computer simulation of two simple models, the first where light affects the frequency distribution of the angles of directional changes (model M1) and the second where the light bias modifies the frequency of directional changes (model M2). Simulated M1 cells directly orient their swimming towards the direction of light, regardless of their current swimming orientation; simulated M2 cells, on the contrary, are unable to actively orient their motion, but remain locked along the light direction once they find it by chance. The simulations show that these two orientation models lead to different macroscopic behaviours of the simulated cell populations. By comparing the results of the simulations with the experimental ones, we have found that the phototactic behaviour of real cells is more similar to that of the M2 model.

A Framework to Move Forward on the Path to Eco-innovation in the Construction Industry: Implications to Improve Firms' Sustainable Orientation.

PubMed

Segarra-Oña, María-del-Val; Peiró-Signes, Angel; Cervelló-Royo, Roberto

2015-12-01

This paper examines key aspects in the innovative behavior of the construction firms that determine their environmental orientation while innovating. Structural equation modeling was used and data of 222 firms retrieved from the Spanish Technological Innovation Panel (PITEC) for 2010 to analyse the drivers of environmental orientation of the construction firms during the innovation process. The results show that the environmental orientation is positively affected by the product and process orientation of construction firms during the innovation process. Furthermore, the positive relation between the importance of market information sources and environmental orientation, mediated by process and product orientation, is discussed. Finally, a model that explains these relations is proposed and validated. Results have important managerial implications for those companies worried about their eco-innovative focus as the types of actions and relations within firms most suitable for improving their eco-innovative orientation are highlighted.

Improved prediction of antibody VL–VH orientation

PubMed Central

Marze, Nicholas A.; Lyskov, Sergey; Gray, Jeffrey J.

2016-01-01

Antibodies are important immune molecules with high commercial value and therapeutic interest because of their ability to bind diverse antigens. Computational prediction of antibody structure can quickly reveal valuable information about the nature of these antigen-binding interactions, but only if the models are of sufficient quality. To achieve high model quality during complementarity-determining region (CDR) structural prediction, one must account for the VL–VH orientation. We developed a novel four-metric VL–VH orientation coordinate frame. Additionally, we extended the CDR grafting protocol in RosettaAntibody with a new method that diversifies VL–VH orientation by using 10 VL–VH orientation templates rather than a single one. We tested the multiple-template grafting protocol on two datasets of known antibody crystal structures. During the template-grafting phase, the new protocol improved the fraction of accurate VL–VH orientation predictions from only 26% (12/46) to 72% (33/46) of targets. After the full RosettaAntibody protocol, including CDR H3 remodeling and VL–VH re-orientation, the new protocol produced more candidate structures with accurate VL–VH orientation than the standard protocol in 43/46 targets (93%). The improved ability to predict VL–VH orientation will bolster predictions of other parts of the paratope, including the conformation of CDR H3, a grand challenge of antibody homology modeling. PMID:27276984

Anatomical modeling of the bronchial tree

NASA Astrophysics Data System (ADS)

Hentschel, Gerrit; Klinder, Tobias; Blaffert, Thomas; Bülow, Thomas; Wiemker, Rafael; Lorenz, Cristian

2010-02-01

The bronchial tree is of direct clinical importance in the context of respective diseases, such as chronic obstructive pulmonary disease (COPD). It furthermore constitutes a reference structure for object localization in the lungs and it finally provides access to lung tissue in, e.g., bronchoscope based procedures for diagnosis and therapy. This paper presents a comprehensive anatomical model for the bronchial tree, including statistics of position, relative and absolute orientation, length, and radius of 34 bronchial segments, going beyond previously published results. The model has been built from 16 manually annotated CT scans, covering several branching variants. The model is represented as a centerline/tree structure but can also be converted in a surface representation. Possible model applications are either to anatomically label extracted bronchial trees or to improve the tree extraction itself by identifying missing segments or sub-trees, e.g., if located beyond a bronchial stenosis. Bronchial tree labeling is achieved using a naïve Bayesian classifier based on the segment properties contained in the model in combination with tree matching. The tree matching step makes use of branching variations covered by the model. An evaluation of the model has been performed in a leaveone- out manner. In total, 87% of the branches resulting from preceding airway tree segmentation could be correctly labeled. The individualized model enables the detection of missing branches, allowing a targeted search, e.g., a local rerun of the tree-segmentation segmentation.

Effects of orientation on acoustic scattering from Antarctic krill at 120 kHz

NASA Astrophysics Data System (ADS)

McGehee, D. E.; O'Driscoll, R. L.; Traykovski, L. V. Martin

Backscattering measurements of 14 live individual Antarctic krill ( Euphausia superba) were made at a frequency of 120 kHz in a chilled insulated tank at the Long Marine Laboratory in Santa Cruz, CA. Individual animals were suspended in front of the transducers, were only loosely constrained, had substantial freedom to move, and showed more or less random orientation. One thousand echoes were collected per animal. Orientation data were recorded on video. The acoustic data were analyzed and target strengths determined from each echo. A method was developed for estimating the three-dimensional orientation of the krill based on the video images and was applied to five of them, giving their target strengths as functions of orientation. Scattering models based on a simplified distorted-wave Born approximation (DWBA) method were developed for five animals and compared with the measurements. Both measured and modeled scattering patterns showed that 120 kHz acoustic scattering levels are highly dependent on animal orientation. Use of these scattering patterns with orientation data from shipboard studies of E. superba gave mean scattering levels approximately 12 dB lower than peak levels. These results underscore the need for better in situ behavioral data to properly interpret acoustic survey results. A generic E. superba DWBA scattering model is proposed that is scalable by animal length. With good orientation information, this model could significantly improve the precision and accuracy of krill acoustic surveys.

A Global Orientation Map in the Primary Visual Cortex (V1): Could a Self Organizing Model Reveal Its Hidden Bias?

PubMed Central

Philips, Ryan T.; Chakravarthy, V. Srinivasa

2017-01-01

A remarkable accomplishment of self organizing models is their ability to simulate the development of feature maps in the cortex. Additionally, these models have been trained to tease out the differential causes of multiple feature maps, mapped on to the same output space. Recently, a Laterally Interconnected Synergetically Self Organizing Map (LISSOM) model has been used to simulate the mapping of eccentricity and meridional angle onto orthogonal axes in the primary visual cortex (V1). This model is further probed to simulate the development of the radial bias in V1, using a training set that consists of both radial (rectangular bars of random size and orientation) as well as non-radial stimuli. The radial bias describes the preference of the visual system toward orientations that match the angular position (meridional angle) of that orientation with respect to the point of fixation. Recent fMRI results have shown that there exists a coarse scale orientation map in V1, which resembles the meridional angle map, thereby providing a plausible neural basis for the radial bias. The LISSOM model, trained for the development of the retinotopic map, on probing for orientation preference, exhibits a coarse scale orientation map, consistent with these experimental results, quantified using the circular cross correlation (rc). The rc between the orientation map developed on probing with a thin annular ring containing sinusoidal gratings with a spatial frequency of 0.5 cycles per degree (cpd) and the corresponding meridional map for the same annular ring, has a value of 0.8894. The results also suggest that the radial bias goes beyond the current understanding of a node to node correlation between the two maps. PMID:28111542

A Global Orientation Map in the Primary Visual Cortex (V1): Could a Self Organizing Model Reveal Its Hidden Bias?

PubMed

Philips, Ryan T; Chakravarthy, V Srinivasa

2016-01-01

A remarkable accomplishment of self organizing models is their ability to simulate the development of feature maps in the cortex. Additionally, these models have been trained to tease out the differential causes of multiple feature maps, mapped on to the same output space. Recently, a Laterally Interconnected Synergetically Self Organizing Map (LISSOM) model has been used to simulate the mapping of eccentricity and meridional angle onto orthogonal axes in the primary visual cortex (V1). This model is further probed to simulate the development of the radial bias in V1, using a training set that consists of both radial (rectangular bars of random size and orientation) as well as non-radial stimuli. The radial bias describes the preference of the visual system toward orientations that match the angular position (meridional angle) of that orientation with respect to the point of fixation. Recent fMRI results have shown that there exists a coarse scale orientation map in V1, which resembles the meridional angle map, thereby providing a plausible neural basis for the radial bias. The LISSOM model, trained for the development of the retinotopic map, on probing for orientation preference, exhibits a coarse scale orientation map, consistent with these experimental results, quantified using the circular cross correlation ( r c ). The r c between the orientation map developed on probing with a thin annular ring containing sinusoidal gratings with a spatial frequency of 0.5 cycles per degree (cpd) and the corresponding meridional map for the same annular ring, has a value of 0.8894. The results also suggest that the radial bias goes beyond the current understanding of a node to node correlation between the two maps.

The Student-Customer Orientation Questionnaire (SCOQ): Application of Customer Metaphor to Higher Education

ERIC Educational Resources Information Center

Koris, Riina; Nokelainen, Petri

2015-01-01

Purpose: The purpose of this paper is to study Bayesian dependency modelling (BDM) to validate the model of educational experiences and the student-customer orientation questionnaire (SCOQ), and to identify the categories of educatonal experience in which students expect a higher educational institutions (HEI) to be student-customer oriented.…

Binocular combination of stimulus orientation.

PubMed

Yehezkel, O; Ding, J; Sterkin, A; Polat, U; Levi, D M

2016-11-01

When two sine waves that differ slightly in orientation are presented to the two eyes separately, a single cyclopean sine wave is perceived. However, it is unclear how the brain calculates its orientation. Here, we used a signal detection rating method to estimate the perceived orientation when the two eyes were presented with Gabor patches that differed in both orientation and contrast. We found a nearly linear combination of orientation when both targets had the same contrast. However, the binocular percept shifted away from the linear prediction towards the orientation with the higher contrast, depending on both the base contrast and the contrast ratio. We found that stimuli that differ slightly in orientation are combined into a single percept, similarly for monocular and binocular presentation, with a bias that depends on the interocular contrast ratio. Our results are well fitted by gain-control models, and are consistent with a previous study that favoured the DSKL model that successfully predicts binocular phase and contrast combination and binocular contrast discrimination. In this model, the departures from linearity may be explained on the basis of mutual suppression and mutual enhancement, both of which are stronger under dichoptic than monocular conditions.

The Observed Longitudinal Relationship between Future Orientation and Substance Use Among a Cohort of Youth with Serious Criminal Offenses.

PubMed

Brooks, Merrian; Miller, Elizabeth; Abebe, Kaleab; Mulvey, Edward

2018-03-06

Future orientation (FO), an essential construct in youth development, encompassing goals, expectations for life, and ability to plan for the future. This study uses a multidimensional measure of future orientation to assess the relationship between change in future orientation and change in substance use over time. Data were from the Pathways to Desistence study. Justice involved youth (n = 1,354), ages 14 to 18 at time of recruitment, completed interviews every six months for three years. Multiple measures were chosen a priori as elements of future orientation. After evaluating the psychometrics of a new measure for future orientation, we ran mixed effects cross-lagged panel models to assess the relationship between changes in future orientation and substance use (tobacco, marijuana, hard drugs, and alcohol). There was a significant bidirectional relationship between future orientation and all substance use outcomes. Adjusted models accounted for different sites, sex, age, ethnicity, parental education, and proportion of time spent in a facility. In adjusted models, higher levels of future orientation resulted in smaller increases in substance use at future time points. Future orientation and substance use influence each other in this sample of adolescent offenders. Treating substance use disorders is also likely to increase future orientation, promoting positive youth development more generally. This study expands our understanding of the longitudinal relationship between changes in future orientation and changes in levels of substance use in a sample of justice involved youth with high levels of substance use, a group of considerable clinical and policy interest.

The language of uncertainty in genetic risk communication: framing and verbal versus numerical information.

PubMed

Welkenhuysen, M; Evers-Kiebooms, G; d'Ydewalle, G

2001-05-01

Within a group of 300 medical students, two characteristics of risk communication in the context of a decision regarding prenatal diagnosis for cystic fibrosis are manipulated: verbal versus numerical probabilities and the negative versus positive framing of the problem (having a child with versus without cystic fibrosis). Independently of the manipulations, most students were in favor of prenatal diagnosis. The effect of framing was only significant in the conditions with verbal information: negative framing produced a stronger choice in favor of prenatal diagnosis than positive framing. The framing effect in the verbal conditions and its absence in the numerical conditions are explained by the dominance of the problem-occurrence orientation in health matters as well as a recoding process which is more likely to occur in the numerical (the probability "1-P" switches to its counterpart "P") than in the verbal conditions. The implications for the practice of genetic counseling are discussed.

Three-dimensional visual feature representation in the primary visual cortex

PubMed Central

Tanaka, Shigeru; Moon, Chan-Hong; Fukuda, Mitsuhiro; Kim, Seong-Gi

2011-01-01

In the cat primary visual cortex, it is accepted that neurons optimally responding to similar stimulus orientations are clustered in a column extending from the superficial to deep layers. The cerebral cortex is, however, folded inside a skull, which makes gyri and fundi. The primary visual area of cats, area 17, is located on the fold of the cortex called the lateral gyrus. These facts raise the question of how to reconcile the tangential arrangement of the orientation columns with the curvature of the gyrus. In the present study, we show a possible configuration of feature representation in the visual cortex using a three-dimensional (3D) self-organization model. We took into account preferred orientation, preferred direction, ocular dominance and retinotopy, assuming isotropic interaction. We performed computer simulation only in the middle layer at the beginning and expanded the range of simulation gradually to other layers, which was found to be a unique method in the present model for obtaining orientation columns spanning all the layers in the flat cortex. Vertical columns of preferred orientations were found in the flat parts of the model cortex. On the other hand, in the curved parts, preferred orientations were represented in wedge-like columns rather than straight columns, and preferred directions were frequently reversed in the deeper layers. Singularities associated with orientation representation appeared as warped lines in the 3D model cortex. Direction reversal appeared on the sheets that were delimited by orientation-singularity lines. These structures emerged from the balance between periodic arrangements of preferred orientations and vertical alignment of same orientations. Our theoretical predictions about orientation representation were confirmed by multi-slice, high-resolution functional MRI in the cat visual cortex. We obtained a close agreement between theoretical predictions and experimental observations. The present study throws a doubt about the conventional columnar view of orientation representation, although more experimental data are needed. PMID:21724370

Three-dimensional visual feature representation in the primary visual cortex.

PubMed

Tanaka, Shigeru; Moon, Chan-Hong; Fukuda, Mitsuhiro; Kim, Seong-Gi

2011-12-01

In the cat primary visual cortex, it is accepted that neurons optimally responding to similar stimulus orientations are clustered in a column extending from the superficial to deep layers. The cerebral cortex is, however, folded inside a skull, which makes gyri and fundi. The primary visual area of cats, area 17, is located on the fold of the cortex called the lateral gyrus. These facts raise the question of how to reconcile the tangential arrangement of the orientation columns with the curvature of the gyrus. In the present study, we show a possible configuration of feature representation in the visual cortex using a three-dimensional (3D) self-organization model. We took into account preferred orientation, preferred direction, ocular dominance and retinotopy, assuming isotropic interaction. We performed computer simulation only in the middle layer at the beginning and expanded the range of simulation gradually to other layers, which was found to be a unique method in the present model for obtaining orientation columns spanning all the layers in the flat cortex. Vertical columns of preferred orientations were found in the flat parts of the model cortex. On the other hand, in the curved parts, preferred orientations were represented in wedge-like columns rather than straight columns, and preferred directions were frequently reversed in the deeper layers. Singularities associated with orientation representation appeared as warped lines in the 3D model cortex. Direction reversal appeared on the sheets that were delimited by orientation-singularity lines. These structures emerged from the balance between periodic arrangements of preferred orientations and vertical alignment of the same orientations. Our theoretical predictions about orientation representation were confirmed by multi-slice, high-resolution functional MRI in the cat visual cortex. We obtained a close agreement between theoretical predictions and experimental observations. The present study throws a doubt about the conventional columnar view of orientation representation, although more experimental data are needed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Iris features-based heart disease diagnosis by computer vision

NASA Astrophysics Data System (ADS)

Nguchu, Benedictor A.; Li, Li

2017-07-01

The study takes advantage of several new breakthroughs in computer vision technology to develop a new mid-irisbiomedical platform that processes iris image for early detection of heart-disease. Guaranteeing early detection of heart disease provides a possibility of having non-surgical treatment as suggested by biomedical researchers and associated institutions. However, our observation discovered that, a clinical practicable solution which could be both sensible and specific for early detection is still lacking. Due to this, the rate of majority vulnerable to death is highly increasing. The delayed diagnostic procedures, inefficiency, and complications of available methods are the other reasons for this catastrophe. Therefore, this research proposes the novel IFB (Iris Features Based) method for diagnosis of premature, and early stage heart disease. The method incorporates computer vision and iridology to obtain a robust, non-contact, nonradioactive, and cost-effective diagnostic tool. The method analyzes abnormal inherent weakness in tissues, change in color and patterns, of a specific region of iris that responds to impulses of heart organ as per Bernard Jensen-iris Chart. The changes in iris infer the presence of degenerative abnormalities in heart organ. These changes are precisely detected and analyzed by IFB method that includes, tensor-based-gradient(TBG), multi orientations gabor filters(GF), textural oriented features(TOF), and speed-up robust features(SURF). Kernel and Multi class oriented support vector machines classifiers are used for classifying normal and pathological iris features. Experimental results demonstrated that the proposed method, not only has better diagnostic performance, but also provides an insight for early detection of other diseases.

Validation of the relative 3D orientation of vertebrae reconstructed by bi-planar radiography.

PubMed

Dumas, R; Le Bras, A; Champain, N; Savidan, M; Mitton, D; Kalifa, G; Steib, J-P; de Guise, J A; Skalli, W

2004-06-01

The three dimensional (3D) reconstruction of the spine can be obtained by stereoradiographic techniques. To be safely used on a routine clinics basis, stereoradiography must provide both accurate vertebral shape and coherent position. Although the accuracy of the reconstructed morphology of the vertebrae is well documented, only few authors studied the accuracy of the vertebral orientation. Therefore, this paper focuses on the evaluation of the orientation accuracy of the reconstructed vertebrae (obtained by non-stereo corresponding point technique) considering either a 178 point vertebral model or a 6 point vertebral model (previously proposed in the literature). Five dried vertebrae were fixed on holders containing four markers each. The 3D reconstruction of both vertebrae and markers were obtained by stereoradiographic techniques. Using least square method matching from one position to another, the relative orientation was computed for the vertebral models (6 or 178 points) and the four markers. These vertebral and holder orientations were compared (considering the holder's one as reference). The repeatability of these relative orientations (vertebrae and holders) was also evaluated. The mean (RMS) orientation error of 178 point vertebral model was 0.6 degrees (0.8 degrees ), for lateral rotation, 0.7 degrees (1.0 degrees ) for sagittal rotation and 1.4 degrees (1.9 degrees ) for axial rotation. The intra-observer repeatability was 0.5 degrees (0.7 degrees ) for lateral rotation, 0.7 degrees (0.8 degrees ) for sagittal rotation and 0.9 degrees (1.2 degrees ) for axial rotation. The orientation was found more accurate and precise when using the 178 point vertebral model than when using the basic 6 point vertebral model. The relative orientation (in post-operative follow-up with respect to the pre-operative examination) of the vertebrae of one scoliotic patient was performed as an example of clinical application. The stereoradiographic method is a reliable 3D quantitative tool to assess the spine deformity, that can be used in clinics for the follow-up of scoliotic patients.

Training Plan. Central Archive for Reusable Defense Software (CARDS)

DTIC Science & Technology

1994-01-29

Modeling Software Reuse Technology: Feature Oriented Domain Analysis ( FODA ). SEI, Carnegie Mellon University, May 1992. 8. Component Provider’s...events to the services of the domain. 4. Feature Oriented Domain Analysis ( FODA ) [COHEN92] The FODA method produces feature models. Feature models provide...Architecture FODA Feature-Oriented Domain Analysis GOTS Government-Off-The-Shelf Pap A-49 STARS-VC-B003/001/00 29 imaty 1994 MS Master of Science NEC

Work experiences among attendees of day centres for people with psychiatric disabilities.

PubMed

Eklund, Mona; Sandlund, Mikael

2015-01-01

It is possible that people with psychiatric disabilities who visit day centres have previous work experiences that may be seen as resources for their current engagement in day centre activities. Research in this respect seems to lack, however. To investigate work experiences among attendees at day centres for people with psychiatric disabilities and relationships with current type of day centre (work-oriented, meeting place-oriented or mixed), engagement in day centre activities, motivation and socio-demographic and health-related factors. Seventy-seven attendees responded to questionnaires. Global Assessment of Functioning, GAF, was also used. Work was categorised into Group I (professionals, semi-professionals), Group II (clerical support, services workers) and Group III (e.g. craft workers, elementary occupations). Almost everyone had previously had open-market employment; more than half for ≥ 10 years. Group I was more common in mixed centres, Group II in meeting place-oriented ones and Group III in work-oriented ones. Group I more frequently had college degree and was rated high on GAF functioning. Women were over-represented in Group II, and men in Group III and in meeting place-oriented centres. Attending mixed centres was more likely when having a college degree, scoring high on GAF functioning and being highly engaged in activities. Attendees at work-oriented day centres were characterised by being motivated for spending time alone and reporting a diagnosis of psychosis. The participants had unused working capacity. No clear-cut relationships were found between work experiences and the investigated correlates.

Prediction of protein orientation upon immobilization on biological and nonbiological surfaces

NASA Astrophysics Data System (ADS)

Talasaz, Amirali H.; Nemat-Gorgani, Mohsen; Liu, Yang; Ståhl, Patrik; Dutton, Robert W.; Ronaghi, Mostafa; Davis, Ronald W.

2006-10-01

We report on a rapid simulation method for predicting protein orientation on a surface based on electrostatic interactions. New methods for predicting protein immobilization are needed because of the increasing use of biosensors and protein microarrays, two technologies that use protein immobilization onto a solid support, and because the orientation of an immobilized protein is important for its function. The proposed simulation model is based on the premise that the protein interacts with the electric field generated by the surface, and this interaction defines the orientation of attachment. Results of this model are in agreement with experimental observations of immobilization of mitochondrial creatine kinase and type I hexokinase on biological membranes. The advantages of our method are that it can be applied to any protein with a known structure; it does not require modeling of the surface at atomic resolution and can be run relatively quickly on readily available computing resources. Finally, we also propose an orientation of membrane-bound cytochrome c, a protein for which the membrane orientation has not been unequivocally determined. electric double layer | electrostatic simulations | orientation flexibility

Development of Academic Goal Orientation Inventory for Senior Secondary School Students of Kerala

ERIC Educational Resources Information Center

Gafoor, K. Abdul; Abidha, Kurukkan

2015-01-01

Research interest in achievement motivation and its correlates has grown in recent years. Though there are thousands of studies on goal orientation, the number of instruments to identify goal orientation based on four-fold model viz., performance approach goal orientation (PAP), performance avoidance goal orientation (PAV), mastery approach goal…

Quantitative Diagnosis of Continuous-Valued, Stead-State Systems

NASA Technical Reports Server (NTRS)

Rouquette, N.

1995-01-01

Quantitative diagnosis involves numerically estimating the values of unobservable parameters that best explain the observed parameter values. We consider quantitative diagnosis for continuous, lumped- parameter, steady-state physical systems because such models are easy to construct and the diagnosis problem is considerably simpler than that for corresponding dynamic models. To further tackle the difficulties of numerically inverting a simulation model to compute a diagnosis, we propose to decompose a physical system model in terms of feedback loops. This decomposition reduces the dimension of the problem and consequently decreases the diagnosis search space. We illustrate this approach on a model of thermal control system studied in earlier research.

The comprehensive health care orientation process indicators explain hospital organisation's attractiveness: a Bayesian analysis of newly hired nurse and physician survey data.

PubMed

Peltokoski, Jaana; Vehviläinen-Julkunen, Katri; Pitkäaho, Taina; Mikkonen, Santtu; Miettinen, Merja

2015-10-01

To examine the relationship of a comprehensive health care orientation process with a hospital's attractiveness. Little is known about indicators of the employee orientation process that most likely explain a hospital organisation's attractiveness. Empirical data collected from registered nurses (n = 145) and physicians (n = 37) working in two specialised hospital districts. A Naive Bayes Classification was applied to examine the comprehensive orientation process indicators that predict hospital's attractiveness. The model was composed of five orientation process indicators: the contribution of the orientation process to nurses' and physicians' intention to stay; the defined responsibilities of the orientation process; interaction between newcomer and colleagues; responsibilities that are adapted for tasks; and newcomers' baseline knowledge assessment that should be done before the orientation phase. The Naive Bayes Classification was used to explore employee orientation process and related indicators. The model constructed provides insight that can be used in designing and implementing the orientation process to promote the hospital organisation's attractiveness. Managers should focus on developing fluently organised orientation practices based on the indicators that predict the hospital's attractiveness. For the purpose of personalised orientation, employees' baseline knowledge and competence level should be assessed before the orientation phase. © 2014 John Wiley & Sons Ltd.

Fusing modeling techniques to support domain analysis for reuse opportunities identification

NASA Technical Reports Server (NTRS)

Hall, Susan Main; Mcguire, Eileen

1993-01-01

Functional modeling techniques or object-oriented graphical representations, which are more useful to someone trying to understand the general design or high level requirements of a system? For a recent domain analysis effort, the answer was a fusion of popular modeling techniques of both types. By using both functional and object-oriented techniques, the analysts involved were able to lean on their experience in function oriented software development, while taking advantage of the descriptive power available in object oriented models. In addition, a base of familiar modeling methods permitted the group of mostly new domain analysts to learn the details of the domain analysis process while producing a quality product. This paper describes the background of this project and then provides a high level definition of domain analysis. The majority of this paper focuses on the modeling method developed and utilized during this analysis effort.

Manager personality, manager service quality orientation, and service climate: test of a model.

PubMed

Salvaggio, Amy Nicole; Schneider, Benjamin; Nishii, Lisa H; Mayer, David M; Ramesh, Anuradha; Lyon, Julie S

2007-11-01

This article conceptually and empirically explores the relationships among manager personality, manager service quality orientation, and climate for customer service. Data were collected from 1,486 employees and 145 managers in grocery store departments (N = 145) to test the authors' theoretical model. Largely consistent with hypotheses, results revealed that core self-evaluations were positively related to managers' service quality orientation, even after dimensions of the Big Five model of personality were controlled, and that service quality orientation fully mediated the relationship between personality and global service climate. Implications for personality and organizational climate research are discussed. (c) 2007 APA

Factors Affecting Parent-Child Relationships One Year After Positive Newborn Screening for Cystic Fibrosis or Congenital Hypothyroidism

PubMed Central

Tluczek, Audrey; Clark, Roseanne; McKechnie, Anne Chevalier; Brown, Roger L.

2014-01-01

Objective Examine factors that mediate parent-infant relationships 12 months after positive newborn screening (NBS). Method We examined effects of infant diagnosis, parents’ perceptions of child vulnerability and child attachment, parental depression and anxiety on parent-infant feeding interactions for 131 mothers and 118 fathers of 131 infants whose NBS and diagnostics confirmed cystic fibrosis (CF, n=23), congenital hypothyroidism (CH, n=35), CF carrier status (CF-C, n=38), or healthy, normal NBS (H, n=35). Results Separate composite indicator structural equation models for mothers and fathers showed neonatal diagnosis was not associated with increased anxiety or depression. In comparison to the H group, CF group parents reported higher perceptions of child vulnerability (p< 0.001, p=0.002); and CF-C group fathers viewed their children as more attached (p=0.021). High maternal perception of child vulnerability was associated with low perceptions of child attachment (p=0.001) which was associated with task-oriented feeding behavior (p=0.016, p=0.029). Parental task-oriented feeding behavior was associated with less positive (p< 0.001, p< 0.001) and more negative interactions (p< 0.001, p= 0.001) with their infants. High paternal perception of child vulnerability was associated with negative parent interactions (p< 0.001). High parental affective involvement and verbalization was associated with high infant affective expressiveness, communicative skills, and social responsiveness (mothers’ p< 0.001, fathers’ p< 0.001). High parental negative affect and/or inconsistent and intrusive behavior was associated with infant dysregulation and irritability (mothers’ p< 0.001, fathers’ p< 0.001). Conclusion The severity of conditions identified through NBS can affect parents’ perceptions of their child’s vulnerability and attachment. Infant feeding problems in the context of chronic health conditions, like CF, could represent signs of more deeply rooted concerns regarding the parent-child relationship that merit additional clinical evaluation. PMID:25493463

[Spontaneous splenic rupture as complication of infective mononucleosis: a clinical case].

PubMed

Delle Monache, Guido; Orlando, Dante; Frassanito, Salvatore; Sciarra, Roberto; Rinaldi, Manlio Tullio

2003-01-01

Spontaneous splenic rupture is a very rare complication of infectious mononucleosis, already described by other authors. In this case report we show the findings occurring in a young man who presented with sudden left thoracic pain and dyspnea. The initial work-up was oriented towards a suspected diagnosis of left spontaneous pneumothorax. Initially, little attention was paid to the clinical history that was characterized by flu-like symptoms during the previous 2 weeks; this, along with a rushed physical examination, could have had dramatic consequences, due to the unavoidable diagnostic delay. A thorough clinical evaluation by Internists, coupled with the essential ultrasonographic diagnostic support, allowed an earlier diagnosis followed by definitive cure, i.e. splenectomy.

Coeliac disease: the histology report.

PubMed

Villanacci, Vincenzo; Ceppa, Paola; Tavani, Enrico; Vindigni, Carla; Volta, Umberto

2011-03-01

To this day intestinal biopsy is justly considered the "gold standard" for the diagnosis of coeliac disease (CD). The aim of the authors in setting up these guidelines was to assist pathologists in formulating a more precise morphological evaluation of a duodenal biopsy in the light of clinical and laboratory data, to prepare histological samples with correctly oriented biopsies and in the differential diagnosis with other pathological entities and complications of the disease. A further intention was to promote the conviction for the need of a close collaborative relationship between different specialists namely the concept of a "multidisciplinary team". Copyright © 2011 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd.. All rights reserved.

Muscular hypertrophy of the left diaphragmatic crus: an unusual cause of a paraspinal "mass".

PubMed

Woodring, J H; Bognar, B

1998-04-01

We present a case of marked muscular hypertrophy of the muscular portion of the diaphragm and of the diaphragmatic crura in a professional opera singer. In this case the right and left crus each measured 20 mm in maximum thickness. The left crus, by nature of its vertical orientation in the sagittal plane, produced marked deviation of the inferior left paraspinal line near the diaphragm mimicking a retrocrural or paraspinal mass on the posteroanterior chest radiograph. The correct diagnosis was made by computed tomography. Muscular hypertrophy of the diaphragmatic crura should be included in the differential diagnosis of retrocrural or paraspinal masses at the level of the diaphragm.

Salt geometry influence on present-day stress orientations in the Nile Delta: Insights from numerical modeling

NASA Astrophysics Data System (ADS)

Eckert, Andreas; Zhang, Weicheng

2016-02-01

The offshore Nile Delta displays sharply contrasting orientations of the maximum horizontal stress, SH, in regions above Messinian evaporites (suprasalt) and regions below Messinian evaporites (subsalt). Published stress orientation data predominantly show margin-normal suprasalt SH orientations but a margin-parallel subsalt SH orientation. While these data sets provide the first major evidence that evaporite sequences can act as mechanical detachment horizons, the cause for the stress orientation contrast remains unclear. In this study, 3D finite element analysis is used to investigate the causes for stress re-orientation based on two different hypotheses. The modeling study evaluates the influence of different likely salt geometries and whether stress reorientations are the result of basal drag forces induced by gravitational gliding or whether they represent localized variations due to mechanical property contrasts. The modeling results show that when salt is present as a continuous layer, gravitational gliding occurs and basal drag forces induced in the suprasalt layers result in the margin-normal principal stress becoming the maximum horizontal stress. With the margin-normal stress increase being confined to the suprasalt layers, the salt acts as a mechanical detachment horizon, resulting in different SH orientations in the suprasalt compared to the subsalt layers. When salt is present as isolated bodies localized stress variations occur due to the mechanical property contrasts imposed by the salt, also resulting in different SH orientations in the suprasalt compared to the subsalt layers. The modeling results provide additional quantitative evidence to confirm the role of evaporite sequences as mechanical detachment horizons.

Crystallographic orientation of the c-axis of biological apatite as a new index of the quality of subchondral bone in knee joint osteoarthritis.

PubMed

Lee, Jee-Wook; Kobayashi, Akio; Nakano, Takayoshi

2017-05-01

The aim of the present study was to investigate the preferred orientation of biological apatite (BAp) as a new index of the quality of subchondral bone (SB) in knee joint osteoarthritis (OA). Ten OA and five normal knee joints were obtained. Thickness, quantity and bone mineral density (BMD) of SB were analyzed at the medial condyle of the femur in dry conditions by peripheral quantitative computed tomography. In addition, the preferred crystallographic orientation of the c-axis of BAp was evaluated as bone quality parameter using a microbeam X-ray diffractometer technique. BMD and thickness of SB were significantly increased in OA specimens compared to normal knee specimens (P < 0.01), and the preferred orientation of the c-axis of BAp along the normal direction of SB surface was significantly higher in OA specimens (P < 0.01), reflecting the change in stress of concentration in the pathological portion without cartilage. SB sclerosis in OA results in both proliferation of bone tissues and enhanced degree of preferential alignment of the c-axis of BAp. Our findings could have major implications for the diagnosis of clinical studies, including pathologic elucidation in OA.

Situation analysis of prenatal diagnosis technology utilization in China: current situation, main issues, and policy implications.

PubMed

Chen, Yingyao; Qian, Xu; Tang, Zhiliu; Banta, H David; Hu, Fangfang; Cao, Jianwen; Huang, Jiayan; Wang, Qian; Lv, Jun; Ying, Xianghua; Chen, Jie

2004-01-01

The purpose of this study is to describe the situation with the distribution and utilization of prenatal diagnosis technology in China, to identify some important barriers to prenatal diagnosis use, and to suggest changes to improve the present situation. The study uses cross-sectional surveys to capture quantitative data from both providers and consumers. Qualitative information based on focus group discussions is also presented. A mail survey of the provincial Bureaus of Health (BOHs) reveals that sixteen provincial prenatal diagnosis centers and twelve city level centers were accredited by the BOHs by July of 2001. These centers were located in thirteen provinces, of thirty in all of China. Of 147 selected institutions surveyed separately, 90.5 percent offer ultrasound examination, 72.1 percent provide pathogen tests (mainly Toxoplasma, rubella virus, cytomegalovirus, and herpes simplex or TORCH), 57.1 percent do biochemical tests, 21.8 percent have genetic counseling, 13.6 percent do karyotype testing, 7.5 percent do enzymology testing, and 5.4 percent carry out molecular genetic testing. Chromosome diseases, congenital diseases, and several gene diseases are the target diseases. According to qualitative data, macromanagement for prenatal diagnosis, supplier provision of tests, and population demand are the main influences on prenatal diagnosis use. From the quantitative and qualitative analysis, it is clear that the technology of prenatal diagnosis is not diffusing well throughout China and is apparently not appropriately used. The situation of prenatal diagnosis has implications for policy-makers, including identification of priorities, regulation of prenatal diagnosis, strategic planning, development of guidelines based on health technology assessment, and consumer orientation.

Specimen Orientation by Marking the Peripheral End: (Potential) Clinical Advantages in Prostate Biopsy

PubMed Central

Galosi, Andrea Benedetto; Muzzonigro, Giovanni; Lacetera, Vito; Mazzucchelli, Roberta

2011-01-01

The aim of this paper is to identify advantages that could be obtained by orientation of the biopsy specimen using the marking technique. We reviewed our experience (4,500 cases) and the published literature. The peripheral (proximal) end of the fresh specimen is marked with ink soon after needle delivering in a few minutes. It is performed easily in association with pre-embedding method. Five potential clinical advantages were identified: (1) tumor localization, (2) atypical lesions localization and planning rebiopsy strategy, (3) planning surgical strategy, (4) selection criteria for focal therapy and active surveillance, and (5) cost reduction. Peripheral end marking is low cost, easy and reproducible. It drives several potential advantages in cancer diagnosis or isolated atypical lesions, in particular, spatial localization within the biopsy (transition versus peripheral zone, anterior versus posterior, subcapsular versus intraparenchima, and extraprostatic extension) should be easy and reliable. We can add a new pathological parameter: pathological orientation or biopsy polarity. PMID:22096654

Object-orientated DBMS techniques for time-oriented medical record.

PubMed

Pinciroli, F; Combi, C; Pozzi, G

1992-01-01

In implementing time-orientated medical record (TOMR) management systems, use of a relational model played a big role. Many applications have been developed to extend query and data manipulation languages to temporal aspects of information. Our experience in developing TOMR revealed some deficiencies inside the relational model, such as: (a) abstract data type definition; (b) unified view of data, at a programming level; (c) management of temporal data; (d) management of signals and images. We identified some first topics to face by an object-orientated approach to database design. This paper describes the first steps in designing and implementing a TOMR by an object-orientated DBMS.

Orientation of three-component geophones in the San Andreas Fault observatory at depth Pilot Hole, Parkfield, California

USGS Publications Warehouse

Oye, V.; Ellsworth, W.L.

2005-01-01

To identify and constrain the target zone for the planned SAFOD Main Hole through the San Andreas Fault (SAF) near Parkfield, California, a 32-level three-component (3C) geophone string was installed in the Pilot Hole (PH) to monitor and improve the locations of nearby earthquakes. The orientation of the 3C geophones is essential for this purpose, because ray directions from sources may be determined directly from the 3D particle motion for both P and S waves. Due to the complex local velocity structure, rays traced from explosions and earthquakes to the PH show strong ray bending. Observed azimuths are obtained from P-wave polarization analysis, and ray tracing provides theoretical estimates of the incoming wave field. The differences between the theoretical and the observed angles define the calibration azimuths. To investigate the process of orientation with respect to the assumed velocity model, we compare calibration azimuths derived from both a homogeneous and 3D velocity model. Uncertainties in the relative orientation between the geophone levels were also estimated for a cluster of 36 earthquakes that was not used in the orientation process. The comparison between the homogeneous and the 3D velocity model shows that there are only minor changes in these relative orientations. In contrast, the absolute orientations, with respect to global North, were significantly improved by application of the 3D model. The average data residual decreased from 13?? to 7??, supporting the importance of an accurate velocity model. We explain the remaining residuals by methodological uncertainties and noise and with errors in the velocity model.

Radiation-Induced Organizing Pneumonia: A Characteristic Disease that Requires Symptom-Oriented Management

PubMed Central

Otani, Keisuke; Seo, Yuji; Ogawa, Kazuhiko

2017-01-01

Radiation-induced organizing pneumonia (RIOP) is an inflammatory lung disease that is occasionally observed after irradiation to the breast. It is a type of secondary organizing pneumonia that is characterized by infiltrates outside the irradiated volume that are sometimes migratory. Corticosteroids work acutely, but relapse of pneumonia is often experienced. Management of RIOP should simply be symptom-oriented, and the use of corticosteroids should be limited to severe symptoms from the perspective not only of cost-effectiveness but also of cancer treatment. Once steroid therapy is started, it takes a long time to stop it due to frequent relapses. We review RIOP from the perspective of its diagnosis, epidemiology, molecular pathogenesis, and patient management. PMID:28134830

Orientation distribution and process modeling of thermotropic liquid crystalline copolyester (TLCP) injection-moldings

NASA Astrophysics Data System (ADS)

Bubeck, Robert; Fang, Jun; Burghardt, Wesley; Burgard, Susan; Fischer, Daniel

2009-03-01

The influence of melt processing conditions upon mechanical properties and degrees of compound molecular orientation have been thoroughly studied for a series of well-defined injection molded samples fabricated from VECTRA (TM) A950 and 4,4'-dihydroxy-a-methylstilbene TLCPs. Fracture and tensile data were correlated with processing conditions, orientation, and molecular weight. Mechanical properties for both TLCPs were found to follow a ``universal'' Anisotropy Factor (AF) associated with the bimodal orientation states in the plaques determined from 2-D WAXS. Surface orientations were globally surveyed using Attenuated Total Reflectance -- Fourier Transform Infrared (ATR-FTIR) spectroscopy and C K edge Near-Edge X-ray Absorption Fine Structure (NEXAFS). The results derived from the two spectroscopy techniques confirmed each other well. These results along with those from 2-D WAXS in transmission were compared with the results of process modeling using a commercial program, MOLDFLOW(TM). The agreement between model predictions and the measured orientation states was gratifyingly good.

The Relationship between Goal Orientations, Motivational Climate and Selfreported Discipline in Physical Education

PubMed Central

Moreno-Murcia, Juan A.; Sicilia, Alvaro; Cervelló, Eduardo; Huéscar, Elisa; Dumitru, Delia C.

2011-01-01

The purpose of this study was to test a motivational model on the links between situational and dispositional motivation and self-reported indiscipline/discipline based on the achievement goals theory. The model postulates that a task-involving motivational climate facilitates self-reported discipline, either directly or mediated by task orientation. In contrast, an ego-involving motivational climate favors self-reported indiscipline, either directly or by means of ego orientation. An additional purpose was to examine gender differences according to the motivational model proposed. Children (n = 565) from a large Spanish metropolitan school district were participants in this study and completed questionnaires assessing goal orientations, motivational climates and self-reported discipline. The results from the analysis of structural equation model showed the direct effect of motivational climates on self-reported discipline and provided support to the model. Furthermore, the gender differences found in self-reported discipline were associated with the differences found in the students’ dispositional and situational motivation pursuant to the model tested. The implications of these results with regard to teaching instructional actions in physical education classes are discussed. Key points A task-involving motivational climate predicts self-reported discipline behaviors, either directly or mediated by task orientation. An ego-involving motivational climate favors self-reported undisciplined, either directly or mediated by ego orientation. A significant gender difference was found in the motivational disposition perceived climate and self-reported discipline. PMID:24149304

Geometric Modeling of Inclusions as Ellipsoids

NASA Technical Reports Server (NTRS)

Bonacuse, Peter J.

2008-01-01

Nonmetallic inclusions in gas turbine disk alloys can have a significant detrimental impact on fatigue life. Because large inclusions that lead to anomalously low lives occur infrequently, probabilistic approaches can be utilized to avoid the excessively conservative assumption of lifing to a large inclusion in a high stress location. A prerequisite to modeling the impact of inclusions on the fatigue life distribution is a characterization of the inclusion occurrence rate and size distribution. To help facilitate this process, a geometric simulation of the inclusions was devised. To make the simulation problem tractable, the irregularly sized and shaped inclusions were modeled as arbitrarily oriented, three independent dimensioned, ellipsoids. Random orientation of the ellipsoid is accomplished through a series of three orthogonal rotations of axes. In this report, a set of mathematical models for the following parameters are described: the intercepted area of a randomly sectioned ellipsoid, the dimensions and orientation of the intercepted ellipse, the area of a randomly oriented sectioned ellipse, the depth and width of a randomly oriented sectioned ellipse, and the projected area of a randomly oriented ellipsoid. These parameters are necessary to determine an inclusion s potential to develop a propagating fatigue crack. Without these mathematical models, computationally expensive search algorithms would be required to compute these parameters.

Progress in modeling and simulation.

PubMed

Kindler, E

1998-01-01

For the modeling of systems, the computers are more and more used while the other "media" (including the human intellect) carrying the models are abandoned. For the modeling of knowledges, i.e. of more or less general concepts (possibly used to model systems composed of instances of such concepts), the object-oriented programming is nowadays widely used. For the modeling of processes existing and developing in the time, computer simulation is used, the results of which are often presented by means of animation (graphical pictures moving and changing in time). Unfortunately, the object-oriented programming tools are commonly not designed to be of a great use for simulation while the programming tools for simulation do not enable their users to apply the advantages of the object-oriented programming. Nevertheless, there are exclusions enabling to use general concepts represented at a computer, for constructing simulation models and for their easy modification. They are described in the present paper, together with true definitions of modeling, simulation and object-oriented programming (including cases that do not satisfy the definitions but are dangerous to introduce misunderstanding), an outline of their applications and of their further development. In relation to the fact that computing systems are being introduced to be control components into a large spectrum of (technological, social and biological) systems, the attention is oriented to models of systems containing modeling components.

Sexual orientation and self-rated health: the role of social capital, offence, threat of violence, and violence.

PubMed

Axelsson, Jakob; Modén, Birgit; Rosvall, Maria; Lindström, Martin

2013-07-01

To study the association between sexual orientation and self-rated health, including trust, offence, threat of violence, and violence. DESIGN/SETTING/PARTICIPANTS/MEASUREMENT: The 2008 Public Health Survey in Skåne is a cross-sectional postal questionnaire study. A total of 28,198 persons aged 18-80 years responded (55%). Logistic regressions analysed the association between sexual orientation and self-rated health. 27.4% of all men and 30.0% of all women rated their health as poor. Poor self-rated health was significantly more prevalent in higher age, among immigrants, people with lower education, low social support, low trust, experience of being offended, experience of threat of violence and violence, and bisexual and other orientation. Homosexual and bisexual men and women had higher age-adjusted odds ratios of having felt offended compared to heterosexual respondents. The odds ratios of low trust, threat of violence (men), and experience of violence (women) were significant for respondents with bisexual orientation but not for respondents with homosexual orientation. In the age-adjusted model, no significant association was observed between homosexual orientation and poor self-rated health among women. All other associations between sexual orientation and health were significant in the age-adjusted model but non-significant in the multiple models. Associations between sexual orientation and health disappear after multiple adjustments including trust and experience of offence, threat of violence, and violence. The study suggests that the group with bisexual orientation seems to be more exposed to low social capital (trust), threat of violence, and violence than the group with homosexual orientation.

Mathematical modeling and numerical simulation of the mitotic spindle orientation system.

PubMed

Ibrahim, Bashar

2018-05-21

The mitotic spindle orientation and position is crucial for the fidelity of chromosome segregation during asymmetric cell division to generate daughter cells with different sizes or fates. This mechanism is best understood in the budding yeast Saccharomyces cerevisiae, named the spindle position checkpoint (SPOC). The SPOC inhibits cells from exiting mitosis until the mitotic spindle is properly oriented along the mother-daughter polarity axis. Despite many experimental studies, the mechanisms underlying SPOC regulation remains elusive and unexplored theoretically. Here, a minimal mathematical is developed to describe SPOC activation and silencing having autocatalytic feedback-loop. Numerical simulations of the nonlinear ordinary differential equations (ODEs) model accurately reproduce the phenotype of SPOC mechanism. Bifurcation analysis of the nonlinear ODEs reveals the orientation dependency on spindle pole bodies, and how this dependence is altered by parameter values. These results provide for systems understanding on the molecular organization of spindle orientation system via mathematical modeling. The presented mathematical model is easy to understand and, within the above mentioned context, can be used as a base for further development of quantitative models in asymmetric cell-division. Copyright © 2018. Published by Elsevier Inc.

Reappraising entrapment neuropathies--mechanisms, diagnosis and management.

PubMed

Schmid, Annina B; Nee, Robert J; Coppieters, Michel W

2013-12-01

The diagnosis of entrapment neuropathies can be difficult because symptoms and signs often do not follow textbook descriptions and vary significantly between patients with the same diagnosis. Signs and symptoms which spread outside of the innervation territory of the affected nerve or nerve root are common. This Masterclass provides insight into relevant mechanisms that may account for this extraterritorial spread in patients with entrapment neuropathies, with an emphasis on neuroinflammation at the level of the dorsal root ganglia and spinal cord, as well as changes in subcortical and cortical regions. Furthermore, we describe how clinical tests and technical investigations may identify these mechanisms if interpreted in the context of gain or loss of function. The management of neuropathies also remains challenging. Common treatment strategies such as joint mobilisation, neurodynamic exercises, education, and medications are discussed in terms of their potential to influence certain mechanisms at the site of nerve injury or in the central nervous system. The mechanism-oriented approach for this Masterclass seems warranted given the limitations in the current evidence for the diagnosis and management of entrapment neuropathies. Copyright © 2013 Elsevier Ltd. All rights reserved.

How the 'warped' relationships between nurses' emotions, attitudes, social support and perceived organizational conditions impact customer orientation.

PubMed

Gountas, Sandra; Gountas, John

2016-02-01

Much research focuses on organizational culture and its impact on customer orientation or emotional states and their impact on job satisfaction and well-being. This study aims to combine the complex roles of nurses' emotion states and job satisfaction in a model that identifies the effects of standards for service delivery (organizational culture), supervisor and co-worker support and the development of customer orientation. A previous study examined the relationships between nurses' personal resources, job satisfaction and customer orientation. This study examines how these variables relate to organizational standards and social support. A cross-sectional survey using a self-completion questionnaire with validated, existing scales to measure standards for service delivery, supervisor and co-worker support, job satisfaction, empathic concern, emotional exhaustion and customer orientation. Nurses (159) completed the questionnaire in 2010. The data were analysed using WarpPLS, a structural equation modelling software package. The results indicate that the final model fits the data well and explains 84% of the variance in customer orientation. The findings show the importance of standard for service delivery (organizational culture), supervisor and co-worker support on customer orientation. Nurses' personal resources interact with these, particularly supervisor and co-worker support, to develop staff job satisfaction and empathy. The need for support mechanisms in stressful times is discussed. We propose that training in compassion and empathy would help leaders to model desirable attributes that contribute towards customer orientation. © 2015 John Wiley & Sons Ltd.

A focused ethnography of a Child and Adolescent Mental Health Service: factors relevant to the implementation of a depression trial.

PubMed

Kitchen, C E W; Lewis, S; Tiffin, P A; Welsh, P R; Howey, L; Ekers, D

2017-05-25

Prior to commencing a randomised controlled trial, we conducted a focused ethnography to ensure that the trial was well suited to the proposed setting. A six-month observation of a Child and Adolescent Mental Health Service site in the North-East of England was undertaken to observe the site procedures, staff culture and patient care pathways. During this period, documentary data were collected and interviews were conducted with key informants to provide insight into staff perceptions of the proposed trial. The data were coded using thematic analysis and the resulting themes were verified by a second coder. Seventeen documents were collected, 158 h of observation and six formal staff interviews were undertaken. Four themes emerged from the data; non-clinically orientated variation in practice, diagnosis, capacity and staff economy. Non-clinically orientated variation in practice occurred when staff decisions were based upon resource availability rather than on clinical judgement. Diagnosis demonstrated differing staff confidence in making diagnoses and in the treatment of patients who had received a diagnosis. Capacity consisted of the time to attend training and the psychological capacity to consider or incorporate learning into practice. Staff economy was characterised by staff changes and shortages. There was significant interaction between the themes, with staff economy emerging as a central barrier to research. The results directly informed adaptations to the trial protocol. An ethnographic approach has provided important insights into the individual, practical and organisational boundaries into which a trial would need to be implemented.

Orientation estimation of anatomical structures in medical images for object recognition

NASA Astrophysics Data System (ADS)

Bağci, Ulaş; Udupa, Jayaram K.; Chen, Xinjian

2011-03-01

Recognition of anatomical structures is an important step in model based medical image segmentation. It provides pose estimation of objects and information about "where" roughly the objects are in the image and distinguishing them from other object-like entities. In,1 we presented a general method of model-based multi-object recognition to assist in segmentation (delineation) tasks. It exploits the pose relationship that can be encoded, via the concept of ball scale (b-scale), between the binary training objects and their associated grey images. The goal was to place the model, in a single shot, close to the right pose (position, orientation, and scale) in a given image so that the model boundaries fall in the close vicinity of object boundaries in the image. Unlike position and scale parameters, we observe that orientation parameters require more attention when estimating the pose of the model as even small differences in orientation parameters can lead to inappropriate recognition. Motivated from the non-Euclidean nature of the pose information, we propose in this paper the use of non-Euclidean metrics to estimate orientation of the anatomical structures for more accurate recognition and segmentation. We statistically analyze and evaluate the following metrics for orientation estimation: Euclidean, Log-Euclidean, Root-Euclidean, Procrustes Size-and-Shape, and mean Hermitian metrics. The results show that mean Hermitian and Cholesky decomposition metrics provide more accurate orientation estimates than other Euclidean and non-Euclidean metrics.

Identifying Solution Paths in Cognitive Diagnosis.

DTIC Science & Technology

1985-03-01

the clinical tradi- tion. Psychoanalysis gets its distinctive flavor to a large extent from the various diagnostic techniques pioneered by Freud and...his disciples: free association, dream analysis, and pro- jective tests. These methods are content-oriented, and aim at a detailed description of the...Also, Psychoanalysis shares with Test Psychology the ambition to find out about stable properties of the individual, properties of his mental life

Problem Oriented Differential Diagnosis of Tropical Diseases

DTIC Science & Technology

1989-09-01

glomerulonephritis. 13. Varicella ( chicken pox ): rare complication. II. Nephrotic syndrome A distinctive lesion associated with nephrotic syndrome in West...hypersensitivity reactions, Stevens-Johnson syndrome, toxic nephrosis, and hypoglycemia. Studies in Mexico have shown that bismuth subsalicylate tablets are...typhus fever 7 14 Murine typhus 14 26 Q fever 10 21 Rickettsial pox 3 14 Rocky mountain spotted fever 6 21 Scrub typhus 2 10 Tick-borne rickettsioses

Anatomy of the ankle ligaments: a pictorial essay.

PubMed

Golanó, Pau; Vega, Jordi; de Leeuw, Peter A J; Malagelada, Francesc; Manzanares, M Cristina; Götzens, Víctor; van Dijk, C Niek

2016-04-01

Understanding the anatomy of the ankle ligaments is important for correct diagnosis and treatment. Ankle ligament injury is the most frequent cause of acute ankle pain. Chronic ankle pain often finds its cause in laxity of one of the ankle ligaments. In this pictorial essay, the ligaments around the ankle are grouped, depending on their anatomic orientation, and each of the ankle ligaments is discussed in detail.

Experimental study and modeling of atomic-scale friction in zigzag and armchair lattice orientations of MoS2

PubMed Central

Li, Meng; Shi, Jialin; Liu, Lianqing; Yu, Peng; Xi, Ning; Wang, Yuechao

2016-01-01

Abstract Physical properties of two-dimensional materials, such as graphene, black phosphorus, molybdenum disulfide (MoS2) and tungsten disulfide, exhibit significant dependence on their lattice orientations, especially for zigzag and armchair lattice orientations. Understanding of the atomic probe motion on surfaces with different orientations helps in the study of anisotropic materials. Unfortunately, there is no comprehensive model that can describe the probe motion mechanism. In this paper, we report a tribological study of MoS2 in zigzag and armchair orientations. We observed a characteristic power spectrum and friction force values. To explain our results, we developed a modified, two-dimensional, stick-slip Tomlinson model that allows simulation of the probe motion on MoS2 surfaces by combining the motion in the Mo layer and S layer. Our model fits well with the experimental data and provides a theoretical basis for tribological studies of two-dimensional materials. PMID:27877869

Self-Reported Mental Disorders and Distress by Sexual Orientation: Results of the Minnesota College Student Health Survey.

PubMed

Przedworski, Julia M; VanKim, Nicole A; Eisenberg, Marla E; McAlpine, Donna D; Lust, Katherine A; Laska, Melissa N

2015-07-01

Sexual minority college students (i.e., those not identifying as heterosexual, or those reporting same-sex sexual activity) may be at increased risk of poor mental health, given factors such as minority stress, stigma, and discrimination. Such disparities could have important implications for students' academic achievement, future health, and social functioning. This study compares reports of mental disorder diagnoses, stressful life events, and frequent mental distress across five gender-stratified sexual orientation categories. Data were from the 2007-2011 College Student Health Survey, which surveyed a random sample of college students (N=34,324) at 40 Minnesota institutions. Data analysis was conducted in 2013-2014. The prevalence of mental disorder diagnoses, frequent mental distress, and stressful life events were calculated for heterosexual, discordant heterosexual, gay or lesbian, bisexual, and unsure students. Logistic regression models were fit to estimate the association between sexual orientation and mental health outcomes. Lesbian, gay, and bisexual students were more likely to report any mental health disorder diagnosis than were heterosexual students (p<0.05). Lesbian, gay, bisexual, and unsure students were significantly more likely to report frequent mental distress compared to heterosexual students (OR range, 1.6-2.7). All sexual minority groups, with the exception of unsure men, had significantly greater odds of experiencing two or more stressful life events (OR range, 1.3-2.8). Sexual minority college students experience worse mental health than their heterosexual peers. These students may benefit from interventions that target the structural and social causes of these disparities, and individual-level interventions that consider their unique life experiences. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Parents Taking Action: A Psycho-Educational Intervention for Latino Parents of Children With Autism Spectrum Disorder.

PubMed

Magaña, Sandra; Lopez, Kristina; Machalicek, Wendy

2017-03-01

The increased prevalence of autism spectrum disorder (ASD) among Latino children, later diagnosis, limited access to bicultural specialist support, and worsened health outcomes when compared to non-Latinos points to the need for a culturally relevant parent education intervention. This pilot study examined the feasibility, acceptability, and preliminary outcomes of a culturally derived intervention, Parents Taking Action, for 19 Spanish-speaking mothers of children with ASD. This study introduces the Promotora de Salud Model of intervention delivery to the autism field. A mixed-methods design including one group pre- and posttest design and focus groups was used to evaluate the outcomes of PTA. We found that the intervention was both feasible to implement and acceptable to participants. We also found significant increases in empowerment oriented outcomes for parents between pre- and posttest suggesting that the intervention is promising. Suggestions for future research and practice are offered. © 2015 Family Process Institute.

[Child sexual abuse. Epidemiology, clinical diagnostics, therapy, and prevention].

PubMed

Fegert, J M; Hoffmann, U; Spröber, N; Liebhardt, H

2013-02-01

The article provides an overview of the research on sexual abuse and the current political developments in Germany. First, the terminology of sexual child abuse is discussed, followed by the presentation of epidemiological data. The section on diagnostics and therapy shows that--because of mostly nonspecific indicators--the diagnosis of child sexual abuse is very difficult to define. Child sexual abuse is discussed as a traumatic experience for children and adolescents with different psychiatric and physical diseases. Current studies have shown that especially cognitive behavioral therapeutic-oriented approaches are effective in curing posttraumatic stress disorders. Based on the new German Child Protection Act, the focus lies on the clarification of confidentiality for medical professionals and their right to consulting services for child protection. In conclusion, guidelines and minimum standards for a child prevention and protection model are presented as well as institutional recommendations addressed to all institutions (also clinical) that take care of or treat children and adolescents.

[Research on direct forming of comminuted fracture surgery orienting model by selective laser melting].

PubMed

He, Xingrong; Yang, Yongqiang; Wu, Weihui; Wang, Di; Ding, Huanwen; Huang, Weihong

2010-06-01

In order to simplify the distal femoral comminuted fracture surgery and improve the accuracy of the parts to be reset, a kind of surgery orienting model for the surgery operation was designed according to the scanning data of computer tomography and the three-dimensional reconstruction image. With the use of DiMetal-280 selective laser melting rapid prototyping system, the surgery orienting model of 316L stainless steel was made through orthogonal experiment for processing parameter optimization. The technology of direct manufacturing of surgery orienting model by selective laser melting was noted to have obvious superiority with high speed, precise profile and good accuracy in size when compared with the conventional one. The model was applied in a real surgical operation for thighbone replacement; it worked well. The successful development of the model provides a new method for the automatic manufacture of customized surgery model, thus building a foundation for more clinical applications in the future.

Recovery orientation of treatment, consumer empowerment, and satisfaction with services: a mediational model.

PubMed

Barrett, Blake; Young, M Scott; Teague, Gregory B; Winarski, James T; Moore, Kathleen A; Ochshorn, Ezra

2010-01-01

This study explores the relationship between the recovery orientation of treatment and subjective experiences of consumer empowerment and satisfaction with services for individuals with severe and persistent mental illness. Instruments measuring perceptions of empowerment, recovery orientation of treatment, and satisfaction with services were administered to 45 participants enrolled in two demographically similar mental health treatment programs in Tampa, Florida - a community mental health center and an Assertive Community Treatment team. Analyses were conducted according to traditional mediation models. Empowerment was expected to mediate the relationship between the recovery orientation of treatment and consumer satisfaction with services. A recovery-based treatment orientation significantly predicted both consumer empowerment and satisfaction with services. Empowerment mediated the relationship between treatment orientation and consumer satisfaction. These preliminary findings highlight the impact of the recovery orientation of treatment on empowerment and satisfaction with services among individuals with severe and persistent mental illness.

Using VCL as an Aspect-Oriented Approach to Requirements Modelling

NASA Astrophysics Data System (ADS)

Amálio, Nuno; Kelsen, Pierre; Ma, Qin; Glodt, Christian

Software systems are becoming larger and more complex. By tackling the modularisation of crosscutting concerns, aspect orientation draws attention to modularity as a means to address the problems of scalability, complexity and evolution in software systems development. Aspect-oriented modelling (AOM) applies aspect-orientation to the construction of models. Most existing AOM approaches are designed without a formal semantics, and use multi-view partial descriptions of behaviour. This paper presents an AOM approach based on the Visual Contract Language (VCL): a visual language for abstract and precise modelling, designed with a formal semantics, and comprising a novel approach to visual behavioural modelling based on design by contract where behavioural descriptions are total. By applying VCL to a large case study of a car-crash crisis management system, the paper demonstrates how modularity of VCL's constructs, at different levels of granularity, help to tackle complexity. In particular, it shows how VCL's package construct and its associated composition mechanisms are key in supporting separation of concerns, coarse-grained problem decomposition and aspect-orientation. The case study's modelling solution has a clear and well-defined modular structure; the backbone of this structure is a collection of packages encapsulating local solutions to concerns.

Topographic instructions, Book 3, multiplex procedure; Chapter 3 C7a-e

USGS Publications Warehouse

Loud, Edward I.

1952-01-01

By direct projection of overlapping photographs, printed on glass plates, the multiplex produces an exact optical model, in miniature, of the terrain to be mapped. To create the model, the multiplex projectors must be properly positioned and oriented so that they duplicate the orientation of the aerial camera at the instant of each exposure. By means of a floating mark, horizontal and vertical measurements can be made in the model, and planimetry and contours can be drawn. The applicability of the multiplex to a given mapping project depends largely on the contour interval and compilation scale required, and also depends, to a lesser extent, on the vegetation and terrain cover as it may affect accuracy requirements. The steps in multiplex procedure are orientation, stereotriangulation, and compilation of detail. In orientation, the projectors are arranged so that the projected images form a stereoscopic model which can be adjusted to fit horizontal and vertical control points. In stereotriangulation, three or more multiplex projectors are oriented so that the consecutive models fit existing control, permitting the establishment of additional or intermediate control. In compilation, the features appearing in the model are delineated on the map manuscript.

Modeling ground-based timber harvesting systems using computer simulation

Treesearch

Jingxin Wang; Chris B. LeDoux

2001-01-01

Modeling ground-based timber harvesting systems with an object-oriented methodology was investigated. Object-oriented modeling and design promote a better understanding of requirements, cleaner designs, and better maintainability of the harvesting simulation system. The model developed simulates chainsaw felling, drive-to-tree feller-buncher, swing-to-tree single-grip...

Experimental and modelling study of the effect of airflow orientation with respect to strip electrode on ozone production of surface dielectric barrier discharge

NASA Astrophysics Data System (ADS)

Mikeš, J.; Pekárek, S.; Soukup, I.

2016-11-01

This study examines the effect of airflow orientation with respect to the strip active electrode on concentration of ozone and nitrogen dioxide produced in a planar generator based on the surface dielectric barrier discharge. The orientation of the airflow was tested in parallel and perpendicular with respect to the strips. It was found that in the investigated range of average discharge power, the ozone concentration increases approximately by 25% when airflow was oriented in parallel with respect to the strips in comparison with perpendicular orientation of the airflow. Similarly the increase of nitrogen dioxide concentration was observed for parallel orientation of the airflow with respect to the strips in comparison with the perpendicular orientation of the airflow. Within the range of wavelengths from 250 to 1100 nm, the changes of intensities of spectral lines associated with airflow orientation have been observed. A 3D numerical model describing ion trajectories and airflow patterns have also been developed.

Towards an Object-Oriented Model for the Design and Development of Learning Objects

ERIC Educational Resources Information Center

Chrysostomou, Chrysostomos; Papadopoulos, George

2008-01-01

This work introduces the concept of an Object-Oriented Learning Object (OOLO) that is developed in a manner similar to the one that software objects are developed through Object-Oriented Software Engineering (OO SWE) techniques. In order to make the application of the OOLO feasible and efficient, an OOLO model needs to be developed based on…

A Confirmatory Factor Analytic Study of the Goal Orientation Theory of Motivation in Educational Leadership

ERIC Educational Resources Information Center

McCollum, Daniel L.; Kajs, Lawrence T.

2009-01-01

The goal orientation theory of motivation posits sets of beliefs people hold regarding their goals. The 2 x 2 model of goal orientations has received almost no attention in the domain of educational leadership. The present researchers used a confirmatory factor analysis to test a measure based on the hypothesized 2 x 2 model in educational…

Development of the PRO-SDLS: A Measure of Self-Direction in Learning Based on the Personal Responsibility Orientation Model

ERIC Educational Resources Information Center

Stockdale, Susan L.; Brockett, Ralph G.

2011-01-01

The purpose of this study was to develop a reliable and valid instrument to measure self-directedness in learning among college students based on an operationalization of the personal responsibility orientation (PRO) model of self-direction in learning. The resultant 25-item Personal Responsibility Orientation to Self-Direction in Learning Scale…

The individual-oriented and social-oriented Chinese bicultural self: testing the theory.

PubMed

Lu, Luo

2008-06-01

The author proposes a bicultural self theory for contemporary Chinese individuals, encompassing 2 main components: the individual-oriented self and the social-oriented self. The social orientation is rooted in traditional Chinese conceptualization of the self, whereas the individual orientation has evolved and developed under Western influences along with recent societal modernization. The author conducted a series of 5 studies to test the theory and relate the model to important issues in current personality and social psychological research, such as cultural individualism-collectivism, self-construals, motivation, cognition, emotion, and well-being. A total of 977 university students in Taiwan participated. The author found that contrasting self-aspects were differentially associated with the aforementioned constructs, as theoretically predicted. This evidence thus generally supported the bicultural self model.

A test of the double-shearing model of flow for granular materials

USGS Publications Warehouse

Savage, J.C.; Lockner, D.A.

1997-01-01

The double-shearing model of flow attributes plastic deformation in granular materials to cooperative slip on conjugate Coulomb shears (surfaces upon which the Coulomb yield condition is satisfied). The strict formulation of the double-shearing model then requires that the slip lines in the material coincide with the Coulomb shears. Three different experiments that approximate simple shear deformation in granular media appear to be inconsistent with this strict formulation. For example, the orientation of the principal stress axes in a layer of sand driven in steady, simple shear was measured subject to the assumption that the Coulomb failure criterion was satisfied on some surfaces (orientation unspecified) within the sand layer. The orientation of the inferred principal compressive axis was then compared with the orientations predicted by the double-shearing model. The strict formulation of the model [Spencer, 1982] predicts that the principal stress axes should rotate in a sense opposite to that inferred from the experiments. A less restrictive formulation of the double-shearing model by de Josselin de Jong [1971] does not completely specify the solution but does prescribe limits on the possible orientations of the principal stress axes. The orientations of the principal compression axis inferred from the experiments are probably within those limits. An elastoplastic formulation of the double-shearing model [de Josselin de Jong, 1988] is reasonably consistent with the experiments, although quantitative agreement was not attained. Thus we conclude that the double-shearing model may be a viable law to describe deformation of granular materials, but the macroscopic slip surfaces will not in general coincide with the Coulomb shears.

Modeling the directional reflectance from complete homogeneous vegetation canopies with various leaf-orientation distributions

NASA Technical Reports Server (NTRS)

Kimes, D. S.

1984-01-01

The directional-reflectance distributions of radiant flux from homogeneous vegetation canopies with greater than 90 percent ground cover are analyzed with a radiative-transfer model. The model assumes that the leaves consist of small finite planes with Lambertian properties. Four theoretical canopies with different leaf-orientation distributions were studied: erectophile, spherical, planophile, and heliotropic canopies. The directional-reflectance distributions from the model closely resemble reflectance distributions measured in the field. The physical scattering mechanisms operating in the model explain the variations observed in the reflectance distributions as a function of leaf-orientation distribution, solar zenith angle, and leaf transmittance and reflectance. The simulated reflectance distribution show unique characteristics for each canopy. The basic understanding of the physical scattering properties of the different canopy geometries gained in this study provide a basis for developing techniques to infer leaf-orientation distributions of vegetation canopies from directional remote-sensing measurements.

Gravitational orientation of the orbital complex, Salyut-6--Soyuz

NASA Technical Reports Server (NTRS)

Grecho, G. M.; Sarychev, V. A.; Legostayev, V. P.; Sazonov, V. V.; Gansvind, I. N.

1983-01-01

A simple mathematical model is proposed for the Salyut-6-Soyuz orbital complex motion with respect to the center of mass under the one-axis gravity-gradient orientation regime. This model was used for processing the measurements of the orbital complex motion parameters when the above orientation region was implemented. Some actual satellite motions are simulated and the satellite's aerodynamic parameters are determined. Estimates are obtained for the accuracy of measurements as well as that of the mathematical model.

The effect of integrated emotion-oriented care versus usual care on elderly persons with dementia in the nursing home and on nursing assistants: a randomized clinical trial.

PubMed

Finnema, Evelyn; Dröes, Rose-Marie; Ettema, Teake; Ooms, Marcel; Adèr, Herman; Ribbe, Miel; van Tilburg, Willem

2005-04-01

To examine the effect of integrated emotion-oriented care on nursing home residents with dementia and nursing assistants. A multi-site randomized clinical trial with matched groups, and measurements at baseline and after seven months. Sixteen psychogeriatric wards in fourteen nursing homes in the Netherlands. One hundred and forty-six elderly residents with the diagnosis dementia of the Alzheimer (DAT) type, mixed DAT and vascular dementia, and dementia syndrome (NAO) and 99 nursing assistants. Integrated emotion-oriented care and usual care. MESUREMENTS: Demented elderly: Behaviour and mood related to adaptation to the illness and the institutionalization. Nursing assistants: General health as measured by feelings of stress, stress reactions, feeling of competence and illness. Positive effects in favour of the integrated emotion-oriented care were found in mild to moderately demented residents on two adaptive tasks: maintaining an emotional balance (less anxiety) and preserving a positive self-image (less dissatisfaction). In the trained group of nursing assistants fewer stress reactions were found only in those who perceived improvement in their emotion-oriented care skills after training. Emotion-oriented care is more effective with regard to the emotional adaptation in nursing homes of persons with a mild to moderate dementia. For the severely demented elderly we did not find this surplus value. This outcome is of clinical importance for elderly persons with dementia who are cared for in nursing homes. With respect to the nursing assistants it is concluded that emotion-oriented care has a positive influence on stress reactions in some of them. Copyright 2005 John Wiley & Sons, Ltd.

Initiating Formal Requirements Specifications with Object-Oriented Models

NASA Technical Reports Server (NTRS)

Ampo, Yoko; Lutz, Robyn R.

1994-01-01

This paper reports results of an investigation into the suitability of object-oriented models as an initial step in developing formal specifications. The requirements for two critical system-level software modules were used as target applications. It was found that creating object-oriented diagrams prior to formally specifying the requirements enhanced the accuracy of the initial formal specifications and reduced the effort required to produce them. However, the formal specifications incorporated some information not found in the object-oriented diagrams, such as higher-level strategy or goals of the software.

Orientation masking and cross-orientation suppression (XOS): implications for estimates of filter bandwidth.

PubMed

Meese, Tim S; Holmes, David J

2010-10-01

Most contemporary models of spatial vision include a cross-oriented route to suppression (masking from a broadly tuned inhibitory pool), which is most potent at low spatial and high temporal frequencies (T. S. Meese & D. J. Holmes, 2007). The influence of this pathway can elevate orientation-masking functions without exciting the target mechanism, and because early psychophysical estimates of filter bandwidth did not accommodate this, it is likely that they have been overestimated for this corner of stimulus space. Here we show that a transient 40% contrast mask causes substantial binocular threshold elevation for a transient vertical target, and this declines from a mask orientation of 0° to about 40° (indicating tuning), and then more gently to 90°, where it remains at a factor of ∼4. We also confirm that cross-orientation masking is diminished or abolished at high spatial frequencies and for sustained temporal modulation. We fitted a simple model of pedestal masking and cross-orientation suppression (XOS) to our data and those of G. C. Phillips and H. R. Wilson (1984) and found the dependency of orientation bandwidth on spatial frequency to be much less than previously supposed. An extension of our linear spatial pooling model of contrast gain control and dilution masking (T. S. Meese & R. J. Summers, 2007) is also shown to be consistent with our results using filter bandwidths of ±20°. Both models include tightly and broadly tuned components of divisive suppression. More generally, because XOS and/or dilution masking can affect the shape of orientation-masking curves, we caution that variations in bandwidth estimates might reflect variations in processes that have nothing to do with filter bandwidth.

Developing a semantic web model for medical differential diagnosis recommendation.

PubMed

Mohammed, Osama; Benlamri, Rachid

2014-10-01

In this paper we describe a novel model for differential diagnosis designed to make recommendations by utilizing semantic web technologies. The model is a response to a number of requirements, ranging from incorporating essential clinical diagnostic semantics to the integration of data mining for the process of identifying candidate diseases that best explain a set of clinical features. We introduce two major components, which we find essential to the construction of an integral differential diagnosis recommendation model: the evidence-based recommender component and the proximity-based recommender component. Both approaches are driven by disease diagnosis ontologies designed specifically to enable the process of generating diagnostic recommendations. These ontologies are the disease symptom ontology and the patient ontology. The evidence-based diagnosis process develops dynamic rules based on standardized clinical pathways. The proximity-based component employs data mining to provide clinicians with diagnosis predictions, as well as generates new diagnosis rules from provided training datasets. This article describes the integration between these two components along with the developed diagnosis ontologies to form a novel medical differential diagnosis recommendation model. This article also provides test cases from the implementation of the overall model, which shows quite promising diagnostic recommendation results.

On the connection between the Koppel-Young and the Nelkin Models for thermal neutron scattering in water molecules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Markovic, M.I.

1982-10-01

A critical analysis of the Koppel-Young model is presented and compared with Nelkin's model and their equivalence is asserted. It is shown that the only distinction between the two models is in the orientational averaging of the rotational-vibrational intermedial scattering function. Based on total cross sections, the Krieger-Nelkin orientation averaging has been confirmed to give excellent agreement with the Koppel-Young orientation averaging. However, significant quasi-periodical differences are observed when calculating differential cross sections. As a result of these insights, a new unified model is proposed for microdynamics of water molecules.

Concerning the Motion of FTEs and Attendant Signatures

NASA Technical Reports Server (NTRS)

Sibeck, David G.

2010-01-01

We employ the Cooling et al. [2001] model to predict the location, orientation, and motion of flux transfer events (FTEs) generated along finite length component and anti parallel reconnection lines for typical solar wind plasma conditions and various interplanetary magnetic field (IMF) orientations in the plane perpendicular to the SunEarth line at the solstices and equinoxes. For duskward and northward or southward IMF orientations, events formed by component reconnection originate along reconnection curves passing through the sub solar point that tilt from southern dawn to northern dusk. They maintain this orientation as they move either northward into the northern dawn quadrant or southward into the southern dusk quadrant. By contrast, events formed by antiparallel reconnection originate along reconnection curves running from northern dawn to southern dusk in the southern dawn and northern dusk quadrants and maintain these orientations as they move anti sunward into both these quadrants. Although both the component and antiparallel reconnection models can explain previously reported event orientations on the southern dusk magnetopause during intervals of northward and dawn ward IMF orientation, only the component model explains event occurrence near the subsolar magnetopause during intervals when the IMF does not point due southward.

Sampling and modeling of rock discontinuities by terrestrial laser scanning and photogrammetry in railway environment

NASA Astrophysics Data System (ADS)

Assali, P.; Grussenmeyer, P.; Pollet, N.; Viguier, F.; Villemin, T.

2012-04-01

In order to increase its knowledge of rock slope stability along the French national rail network, the SNCF Engineering Management is developing a new approach for sampling and modeling rock discontinuities. The rock face diagnosis is a follow-up and check operation of the field works. This operation allowed to optimize the rock risk treatment at the best price in respect with safety requirements. These operations require the measurement of orientation and location of rock discontinuities at the surface of the rock mass and is followed by a structural modeling in order to extrapolate the data collected at the surface to the inner part of the massif. At present, this work is completed manually with a compass-clinometer, in a simplified way mainly based on the specialist's experience. The analysis remains empirical, and most of the time restricted to the most fractured zone, whereas safety requirements ask for an exhaustive study on the whole of the site. Filling these gaps, the combined use of dense three-dimensional measurement techniques, associating both terrestrial laser scanning and optical imaging, makes it possible to obtain a more complete structural statement. The data acquisition and processing need protocols adapted to the railway environment for obtaining suitable 3D models. Then the exploitation of these models requires the development of semi-automatic process, with an aim of, to support the geologist's on-site expertise with a digital model exploitation. The geometrical characterization of the rock mass is undertaken thanks to a classification of the model in several subsets corresponding to the main directional families. The data on these planar discontinuities, traditionally acquired manually in certain points necessarily accessible of the rock face, result now from dense 3D models covering the whole of the work. Therefore, statistical sampling is stronger, while the time of the on-site survey is reduced. By these means, the diagnosis should be made reliable and the recommendations optimized with the unfavourable sectors. Then, risk analysis can be targeted on the potential disorders zones and not on the whole of the studied sector. Keywords : Discontinuities, fractures, railway exploitation, terrestrial laser-scanner, dense image matching, rock mass characterization, directional families, data processing

Object-oriented biomedical system modelling--the language.

PubMed

Hakman, M; Groth, T

1999-11-01

The paper describes a new object-oriented biomedical continuous system modelling language (OOBSML). It is fully object-oriented and supports model inheritance, encapsulation, and model component instantiation and behaviour polymorphism. Besides the traditional differential and algebraic equation expressions the language includes also formal expressions for documenting models and defining model quantity types and quantity units. It supports explicit definition of model input-, output- and state quantities, model components and component connections. The OOBSML model compiler produces self-contained, independent, executable model components that can be instantiated and used within other OOBSML models and/or stored within model and model component libraries. In this way complex models can be structured as multilevel, multi-component model hierarchies. Technically the model components produced by the OOBSML compiler are executable computer code objects based on distributed object and object request broker technology. This paper includes both the language tutorial and the formal language syntax and semantic description.

Snow Crystal Orientation Effects on the Scattering of Passive Microwave Radiation

NASA Technical Reports Server (NTRS)

Foster, J. L.; Barton, J. S.; Chang, A. T. C.; Hall, D. K.

1999-01-01

For this study, consideration is given to the role crystal orientation plays in scattering and absorbing microwave radiation. A discrete dipole scattering model is used to measure the passive microwave radiation, at two polarizations (horizontal and vertical), scattered by snow crystals oriented in random and non random positions, having various sizes (ranging between 1 micrometers to 10,000 micrometers in radius), and shapes (including spheroids, cylinders, hexagons). The model results demonstrate that for the crystal sizes typically found in a snowpack, crystal orientation is insignificant compared to crystal size in terms of scattering microwave energy in the 8,100 gm (37 GHz) region of the spectrum. Therefore, the assumption used in radiative transfer approaches, where snow crystals are modeled as randomly oriented spheres, is adequate to account for the transfer of microwave energy emanating from the ground and passing through a snowpack.

A New Unified Analysis of Estimate Errors by Model-Matching Phase-Estimation Methods for Sensorless Drive of Permanent-Magnet Synchronous Motors and New Trajectory-Oriented Vector Control, Part II

NASA Astrophysics Data System (ADS)

Shinnaka, Shinji

This paper presents a new unified analysis of estimate errors by model-matching extended-back-EMF estimation methods for sensorless drive of permanent-magnet synchronous motors. Analytical solutions about estimate errors, whose validity is confirmed by numerical experiments, are rich in universality and applicability. As an example of universality and applicability, a new trajectory-oriented vector control method is proposed, which can realize directly quasi-optimal strategy minimizing total losses with no additional computational loads by simply orienting one of vector-control coordinates to the associated quasi-optimal trajectory. The coordinate orientation rule, which is analytically derived, is surprisingly simple. Consequently the trajectory-oriented vector control method can be applied to a number of conventional vector control systems using model-matching extended-back-EMF estimation methods.

Anisotropy model for modern grain oriented electrical steel based on orientation distribution function

NASA Astrophysics Data System (ADS)

Jiang, Fan; Rossi, Mathieu; Parent, Guillaume

2018-05-01

Accurately modeling the anisotropic behavior of electrical steel is mandatory in order to perform good end simulations. Several approaches can be found in the literature for that purpose but the more often those methods are not able to deal with grain oriented electrical steel. In this paper, a method based on orientation distribution function is applied to modern grain oriented laminations. In particular, two solutions are proposed in order to increase the results accuracy. The first one consists in increasing the decomposition number of the cosine series on which the method is based. The second one consists in modifying the determination method of the terms belonging to this cosine series.

On the engineering design for systematic integration of agent-orientation in industrial automation.

PubMed

Yu, Liyong; Schüller, Andreas; Epple, Ulrich

2014-09-01

In today's automation industry, agent-oriented development of system functionalities appears to have a great potential for increasing autonomy and flexibility of complex operations, while lowering the workload of users. In this paper, we present a reference model for the harmonious and systematical integration of agent-orientation in industrial automation. Considering compatibility with existing automation systems and best practice, this model combines advantages of function block technology, service orientation and native description methods from the automation standard IEC 61131-3. This approach can be applied as a guideline for the engineering design of future agent-oriented automation systems. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Assessing Change in Latent Skills across Time with Longitudinal Cognitive Diagnosis Modeling: An Evaluation of Model Performance

ERIC Educational Resources Information Center

Kaya, Yasemin; Leite, Walter L.

2017-01-01

Cognitive diagnosis models are diagnostic models used to classify respondents into homogenous groups based on multiple categorical latent variables representing the measured cognitive attributes. This study aims to present longitudinal models for cognitive diagnosis modeling, which can be applied to repeated measurements in order to monitor…

An Efficient Model-based Diagnosis Engine for Hybrid Systems Using Structural Model Decomposition

NASA Technical Reports Server (NTRS)

Bregon, Anibal; Narasimhan, Sriram; Roychoudhury, Indranil; Daigle, Matthew; Pulido, Belarmino

2013-01-01

Complex hybrid systems are present in a large range of engineering applications, like mechanical systems, electrical circuits, or embedded computation systems. The behavior of these systems is made up of continuous and discrete event dynamics that increase the difficulties for accurate and timely online fault diagnosis. The Hybrid Diagnosis Engine (HyDE) offers flexibility to the diagnosis application designer to choose the modeling paradigm and the reasoning algorithms. The HyDE architecture supports the use of multiple modeling paradigms at the component and system level. However, HyDE faces some problems regarding performance in terms of complexity and time. Our focus in this paper is on developing efficient model-based methodologies for online fault diagnosis in complex hybrid systems. To do this, we propose a diagnosis framework where structural model decomposition is integrated within the HyDE diagnosis framework to reduce the computational complexity associated with the fault diagnosis of hybrid systems. As a case study, we apply our approach to a diagnostic testbed, the Advanced Diagnostics and Prognostics Testbed (ADAPT), using real data.

Transmural variation in elastin fiber orientation distribution in the arterial wall.

PubMed

Yu, Xunjie; Wang, Yunjie; Zhang, Yanhang

2018-01-01

The complex three-dimensional elastin network is a major load-bearing extracellular matrix (ECM) component of an artery. Despite the reported anisotropic behavior of arterial elastin network, it is usually treated as an isotropic material in constitutive models. Our recent multiphoton microscopy study reported a relatively uniform elastin fiber orientation distribution in porcine thoracic aorta when imaging from the intima side (Chow et al., 2014). However it is questionable whether the fiber orientation distribution obtained from a small depth is representative of the elastin network structure in the arterial wall, especially when developing structure-based constitutive models. To date, the structural basis for the anisotropic mechanical behavior of elastin is still not fully understood. In this study, we examined the transmural variation in elastin fiber orientation distribution in porcine thoracic aorta and its association with elastin anisotropy. Using multi-photon microscopy, we observed that the elastin fibers orientation changes from a relatively uniform distribution in regions close to the luminal surface to a more circumferential distribution in regions that dominate the media, then to a longitudinal distribution in regions close to the outer media. Planar biaxial tensile test was performed to characterize the anisotropic behavior of elastin network. A new structure-based constitutive model of elastin network was developed to incorporate the transmural variation in fiber orientation distribution. The new model well captures the anisotropic mechanical behavior of elastin network under both equi- and nonequi-biaxial loading and showed improvements in both fitting and predicting capabilities when compared to a model that only considers the fiber orientation distribution from the intima side. We submit that the transmural variation in fiber orientation distribution is important in characterizing the anisotropic mechanical behavior of elastin network and should be considered in constitutive modeling of an artery. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mentat: An object-oriented macro data flow system

NASA Technical Reports Server (NTRS)

Grimshaw, Andrew S.; Liu, Jane W. S.

1988-01-01

Mentat, an object-oriented macro data flow system designed to facilitate parallelism in distributed systems, is presented. The macro data flow model is a model of computation similar to the data flow model with two principal differences: the computational complexity of the actors is much greater than in traditional data flow systems, and there are persistent actors that maintain state information between executions. Mentat is a system that combines the object-oriented programming paradigm and the macro data flow model of computation. Mentat programs use a dynamic structure called a future list to represent the future of computations.

Market Orientation in Managing Relationships with Multiple Constituencies of Croatian Higher Education

ERIC Educational Resources Information Center

Pavicic, Jurica; Alfirevic, Niksa; Mihanovic, Zoran

2009-01-01

In this paper, market orientation in Croatian higher education (HE) is discussed within the context of stakeholder-oriented management. Drawing on existing studies, the "classical" empirical model, describing the market orientation of generic nonprofit organisations, has been adapted to the contingencies of the Croatian HE sector.…

Feasibility of observer system for determining orientation of balloon borne observational platforms

NASA Technical Reports Server (NTRS)

Nigro, N. J.; Gagliardi, J. C.

1982-01-01

The instantaneous orientation (i.e., the attitude) of the LACATE instrumentation platform with respect to a local vertical is discussed. An observer model for predicting the orientation of balloon-borne research platforms is described. Determination of the platform orientation as a function of time is addressed.

Attentional Control in Visual Signal Detection: Effects of Abrupt-Onset and No-Onset Stimuli

ERIC Educational Resources Information Center

Sewell, David K.; Smith, Philip L.

2012-01-01

The attention literature distinguishes two general mechanisms by which attention can benefit performance: gain (or resource) models and orienting (or switching) models. In gain models, processing efficiency is a function of a spatial distribution of capacity or resources; in orienting models, an attentional spotlight must be aligned with the…

The Spiral-Interactive Program Evaluation Model.

ERIC Educational Resources Information Center

Khaleel, Ibrahim Adamu

1988-01-01

Describes the spiral interactive program evaluation model, which is designed to evaluate vocational-technical education programs in secondary schools in Nigeria. Program evaluation is defined; utility oriented and process oriented models for evaluation are described; and internal and external evaluative factors and variables that define each…

MODELING DISPERSANT INTERACTIONS WITH OIL SPILLS

EPA Science Inventory

EPA is developing a model called the EPA Research Object-Oriented Oil Spill Model (ERO3S) and associated databases to simulate the impacts of dispersants on oil slicks. Because there are features of oil slicks that align naturally with major concepts of object-oriented programmi...

Consulting Basics for the Teacher-Turned-Technology Consultant.

ERIC Educational Resources Information Center

Stager, Sue; Green, Kathy

1988-01-01

Discusses the role of educational technology consultants who may be classroom teachers with no formal training in consulting. Consulting models are described, including content-oriented and process-oriented approaches; Schein's process facilitator model is examined; and Kurpius' consulting model is explained and expanded. (LRW)

Educators' Experiences Learning to Meet Adaptive Challenges Involving English Learners within the Learning-Oriented Leadership Model: A Qualitative Study

ERIC Educational Resources Information Center

Benis Scheier-Dolberg, Sarah Elizabeth.

2014-01-01

Little is known about how engaging in the learning-oriented leadership model (Drago-Severson, 2004b, 2009, 2012a) can support educators to address the adaptive challenges they encounter in their day-to-day work teaching English learners. My qualitative study examined how 11 educators whose school leaders implement the learning-oriented leadership…

A Logical Account of Diagnosis with Multiple Theories

NASA Technical Reports Server (NTRS)

Pandurang, P.; Lum, Henry Jr. (Technical Monitor)

1994-01-01

Model-based diagnosis is a powerful, first-principles approach to diagnosis. The primary drawback with model-based diagnosis is that it is based on a system model, and this model might be inappropriate. The inappropriateness of models usually stems from the fundamental tradeoff between completeness and efficiency. Recently, Struss has developed an elegant proposal for diagnosis with multiple models. Struss characterizes models as relations and develops a precise notion of abstraction. He defines relations between models and analyzes the effect of a model switch on the space of possible diagnoses. In this paper we extend Struss's proposal in three ways. First, our account of diagnosis with multiple models is based on representing models as more expressive first-order theories, rather than as relations. A key technical contribution is the use of a general notion of abstraction based on interpretations between theories. Second, Struss conflates component modes with models, requiring him to define models relations such as choices which result in non-relational models. We avoid this problem by differentiating component modes from models. Third, we present a more general account of simplifications that correctly handles situations where the simplification contradicts the base theory.

Learning Oriented Region-based Convolutional Neural Networks for Building Detection in Satellite Remote Sensing Images

NASA Astrophysics Data System (ADS)

Chen, C.; Gong, W.; Hu, Y.; Chen, Y.; Ding, Y.

2017-05-01

The automated building detection in aerial images is a fundamental problem encountered in aerial and satellite images analysis. Recently, thanks to the advances in feature descriptions, Region-based CNN model (R-CNN) for object detection is receiving an increasing attention. Despite the excellent performance in object detection, it is problematic to directly leverage the features of R-CNN model for building detection in single aerial image. As we know, the single aerial image is in vertical view and the buildings possess significant directional feature. However, in R-CNN model, direction of the building is ignored and the detection results are represented by horizontal rectangles. For this reason, the detection results with horizontal rectangle cannot describe the building precisely. To address this problem, in this paper, we proposed a novel model with a key feature related to orientation, namely, Oriented R-CNN (OR-CNN). Our contributions are mainly in the following two aspects: 1) Introducing a new oriented layer network for detecting the rotation angle of building on the basis of the successful VGG-net R-CNN model; 2) the oriented rectangle is proposed to leverage the powerful R-CNN for remote-sensing building detection. In experiments, we establish a complete and bran-new data set for training our oriented R-CNN model and comprehensively evaluate the proposed method on a publicly available building detection data set. We demonstrate State-of-the-art results compared with the previous baseline methods.

Eating disorders among professional fashion models.

PubMed

Preti, Antonio; Usai, Ambra; Miotto, Paola; Petretto, Donatella Rita; Masala, Carmelo

2008-05-30

Fashion models are thought to be at an elevated risk for eating disorders, but few methodologically rigorous studies have explored this assumption. We have investigated the prevalence of eating disorders in a group of 55 fashion models born in Sardinia, Italy, comparing them with a group of 110 girls of the same age and of comparable social and cultural backgrounds. The study was based on questionnaires and face-to-face interviews, to reduce the bias due to symptom under-reporting and to social desirability responding. When compared on three well-validated self-report questionnaires (the EAT, BITE, BAT), the models and controls did not differ significantly. However, in a detailed interview (the Eating Disorder Examination), models reported significantly more symptoms of eating disorders than controls, and a higher prevalence of partial syndromes of eating disorders was found in models than in controls. A body mass index below 18 was found for 34 models (54.5%) as compared with 14 controls (12.7%). Three models (5%) and no controls reported an earlier clinical diagnosis of anorexia nervosa. Further studies will be necessary to establish whether the slight excess of partial syndromes of eating disorders among fashion models was a consequence of the requirement in the profession to maintain a slim figure or if the fashion modeling profession is preferably chosen by girls already oriented towards symptoms of eating disorders, since the pressure to be thin imposed by this profession can be more easily accepted by people predisposed to eating disorders.

Polarized skylight navigation in insects: model and electrophysiology of e-vector coding by neurons in the central complex.

PubMed

Sakura, Midori; Lambrinos, Dimitrios; Labhart, Thomas

2008-02-01

Many insects exploit skylight polarization for visual compass orientation or course control. As found in crickets, the peripheral visual system (optic lobe) contains three types of polarization-sensitive neurons (POL neurons), which are tuned to different ( approximately 60 degrees diverging) e-vector orientations. Thus each e-vector orientation elicits a specific combination of activities among the POL neurons coding any e-vector orientation by just three neural signals. In this study, we hypothesize that in the presumed orientation center of the brain (central complex) e-vector orientation is population-coded by a set of "compass neurons." Using computer modeling, we present a neural network model transforming the signal triplet provided by the POL neurons to compass neuron activities coding e-vector orientation by a population code. Using intracellular electrophysiology and cell marking, we present evidence that neurons with the response profile of the presumed compass neurons do indeed exist in the insect brain: each of these compass neuron-like (CNL) cells is activated by a specific e-vector orientation only and otherwise remains silent. Morphologically, CNL cells are tangential neurons extending from the lateral accessory lobe to the lower division of the central body. Surpassing the modeled compass neurons in performance, CNL cells are insensitive to the degree of polarization of the stimulus between 99% and at least down to 18% polarization and thus largely disregard variations of skylight polarization due to changing solar elevations or atmospheric conditions. This suggests that the polarization vision system includes a gain control circuit keeping the output activity at a constant level.

Modelling approach for anisotropic inter-ply slippage in finite element forming simulation of thermoplastic UD-tapes

NASA Astrophysics Data System (ADS)

Dörr, Dominik; Faisst, Markus; Joppich, Tobias; Poppe, Christian; Henning, Frank; Kärger, Luise

2018-05-01

Finite Element (FE) forming simulation offers the possibility of a detailed analysis of thermoforming processes by means of constitutive modelling of intra- and inter-ply deformation mechanisms, which makes manufacturing defects predictable. Inter-ply slippage is a deformation mechanism, which influences the forming behaviour and which is usually assumed to be isotropic in FE forming simulation so far. Thus, the relative (fibre) orientation between the slipping plies is neglected for modelling of frictional behaviour. Characterization results, however, reveal a dependency of frictional behaviour on the relative orientation of the slipping plies. In this work, an anisotropic model for inter-ply slippage is presented, which is based on an FE forming simulation approach implemented within several user subroutines of the commercially available FE solver Abaqus. This approach accounts for the relative orientation between the slipping plies for modelling frictional behaviour. For this purpose, relative orientation of the slipping plies is consecutively evaluated, since it changes during forming due to inter-ply slipping and intra-ply shearing. The presented approach is parametrized based on characterization results with and without relative orientation for a thermoplastic UD-tape (PA6-CF) and applied to forming simulation of a generic geometry. Forming simulation results reveal an influence of the consideration of relative fibre orientation on the simulation results. This influence, however, is small for the considered geometry.

Orientation Modeling for Amateur Cameras by Matching Image Line Features and Building Vector Data

NASA Astrophysics Data System (ADS)

Hung, C. H.; Chang, W. C.; Chen, L. C.

2016-06-01

With the popularity of geospatial applications, database updating is getting important due to the environmental changes over time. Imagery provides a lower cost and efficient way to update the database. Three dimensional objects can be measured by space intersection using conjugate image points and orientation parameters of cameras. However, precise orientation parameters of light amateur cameras are not always available due to their costliness and heaviness of precision GPS and IMU. To automatize data updating, the correspondence of object vector data and image may be built to improve the accuracy of direct georeferencing. This study contains four major parts, (1) back-projection of object vector data, (2) extraction of image feature lines, (3) object-image feature line matching, and (4) line-based orientation modeling. In order to construct the correspondence of features between an image and a building model, the building vector features were back-projected onto the image using the initial camera orientation from GPS and IMU. Image line features were extracted from the imagery. Afterwards, the matching procedure was done by assessing the similarity between the extracted image features and the back-projected ones. Then, the fourth part utilized line features in orientation modeling. The line-based orientation modeling was performed by the integration of line parametric equations into collinearity condition equations. The experiment data included images with 0.06 m resolution acquired by Canon EOS Mark 5D II camera on a Microdrones MD4-1000 UAV. Experimental results indicate that 2.1 pixel accuracy may be reached, which is equivalent to 0.12 m in the object space.

College Students' Physical Activity and Health-Related Quality of Life: An Achievement Goal Perspective.

PubMed

Zhang, Tao; Xiang, Ping; Gu, Xiangli; Rose, Melanie

2016-06-01

The 2 × 2 achievement goal model, including the mastery-approach, mastery-avoidance, performance-approach, and performance-avoidance goal orientations, has recently been used to explain motivational outcomes in physical activity. This study attempted to examine the relationships among 2 × 2 achievement goal orientations, physical activity, and health-related quality of life (HRQOL) in college students. Participants were 325 students (130 men and 195 women; Mage = 21.4 years) enrolled in physical activity classes at a Southern university. They completed surveys validated in previous research assessing achievement goal orientations, physical activity, and HRQOL. Path analyses revealed a good fit between the model and data (root mean square error of approximation = .06; Comparative Fit Index = .99; Bentler-Bonett Nonnormed Fit Index = .98; Incremental Fit Index = .99), but the model explained small variances in the current study. Mastery-approach and performance-approach goal orientations only had low or no relationships with physical activity. Mastery-approach goal orientation and physical activity also had low positive relationships with HRQOL, but mastery-avoidance and performance-avoidance goal orientations had low negative relationships with HRQOL. The hypothesized mediational role of physical activity in the relationship between mastery-approach and performance-approach goal orientations and HRQOL was not supported in this study. Although the data fit the proposed model well, only small variance was explained by the model. The relationship between physical activity and HRQOL of the college students and other related correlates should be further studied.

Structure-oriented versus process-oriented approach to enhance efficiency for emergency room operations: what lessons can we learn?

PubMed

Hwang, Taik Gun; Lee, Younsuk; Shin, Hojung

2011-01-01

The efficiency and quality of a healthcare system can be defined as interactions among the system structure, processes, and outcome. This article examines the effect of structural adjustment (change in floor plan or layout) and process improvement (critical pathway implementation) on performance of emergency room (ER) operations for acute cerebral infarction patients. Two large teaching hospitals participated in this study: Korea University (KU) Guro Hospital and KU Anam Hospital. The administration of Guro adopted a structure-oriented approach in improving its ER operations while the administration of Anam employed a process-oriented approach, facilitating critical pathways and protocols. To calibrate improvements, the data for time interval, length of stay, and hospital charges were collected, before and after the planned changes were implemented at each hospital. In particular, time interval is the most essential measure for handling acute stroke patients because patients' survival and recovery are affected by the promptness of diagnosis and treatment. Statistical analyses indicated that both redesign of layout at Guro and implementation of critical pathways at Anam had a positive influence on most of the performance measures. However, reduction in time interval was not consistent at Guro, demonstrating delays in processing time for a few processes. The adoption of critical pathways at Anam appeared more effective in reducing time intervals than the structural rearrangement at Guro, mainly as a result of the extensive employee training required for a critical pathway implementation. Thus, hospital managers should combine structure-oriented and process-oriented strategies to maximize effectiveness of improvement efforts.

Separating the Laparoscopic Camera Cord From the Monopolar "Bovie" Cord Reduces Unintended Thermal Injury From Antenna Coupling: A Randomized Controlled Trial.

PubMed

Robinson, Thomas N; Jones, Edward L; Dunn, Christina L; Dunne, Bruce; Johnson, Elizabeth; Townsend, Nicole T; Paniccia, Alessandro; Stiegmann, Greg V

2015-06-01

The monopolar "Bovie" is used in virtually every laparoscopic operation. The active electrode and its cord emit radiofrequency energy that couples (or transfers) to nearby conductive material without direct contact. This phenomenon is increased when the active electrode cord is oriented parallel to another wire/cord. The parallel orientation of the "Bovie" and laparoscopic camera cords cause transfer of energy to the camera cord resulting in cutaneous burns at the camera trocar incision. We hypothesized that separating the active electrode/camera cords would reduce thermal injury occurring at the camera trocar incision in comparison to parallel oriented active electrode/camera cords. In this prospective, blinded, randomized controlled trial, patients undergoing standardized laparoscopic cholecystectomy were randomized to separated active electrode/camera cords or parallel oriented active electrode/camera cords. The primary outcome variable was thermal injury determined by histology from skin biopsied at the camera trocar incision. Eighty-four patients participated. Baseline demographics were similar in the groups for age, sex, preoperative diagnosis, operative time, and blood loss. Thermal injury at the camera trocar incision was lower in the separated versus parallel group (31% vs 57%; P = 0.027). Separation of the laparoscopic camera cord from the active electrode cord decreases thermal injury from antenna coupling at the camera trocar incision in comparison to the parallel orientation of these cords. Therefore, parallel orientation of these cords (an arrangement promoted by integrated operating rooms) should be abandoned. The findings of this study should influence the operating room setup for all laparoscopic cases.

[AIT (Adolescent Identity Treatment) - an Integrative Treatment Model for the Treatment of Personality Disorders].

PubMed

Schlüter-Müller, Susanne

2017-07-01

AIT (Adolescent Identity Treatment) - an Integrative Treatment Model for the Treatment of Personality Disorders Personality disorders are patterns of maladaptive personality traits that have an impact on the individual throughout the life span. Borderline Personality Disorder (BPD) is a very severe, but treatable mental disorder. Identity disturbance is seen as the central construct for detecting severe personality pathology - and, most notably, borderline personality disorder - in adults and adolescents. Crises in the development of identity usually resolve into a normal and consolidated identity with flexible and adaptive functioning whereas identity diffusion is viewed as a lack of integration of the concept of the self and significant others. It is seen as the basis for subsequent personality pathology, including that of borderline personality disorder. Although BPD has its onset in adolescence and emerging adulthood the diagnosis is often delayed. In most cases, specific treatment is only offered late in the course of the disorder and to relatively few individuals. Adolescent Identity Treatment (AIT) is a treatment model that focuses on identity pathology as the core characteristic of personality disorders. This model integrates specific techniques for the treatment of adolescent personality pathology on the background of object-relation theories and modified elements of Transference-Focused Psychotherapy. Moreover, psychoeducation, a behavior-oriented homeplan and intensive family work is part of AIT.

Computer modeling of lung cancer diagnosis-to-treatment process

PubMed Central

Ju, Feng; Lee, Hyo Kyung; Osarogiagbon, Raymond U.; Yu, Xinhua; Faris, Nick

2015-01-01

We introduce an example of a rigorous, quantitative method for quality improvement in lung cancer care-delivery. Computer process modeling methods are introduced for lung cancer diagnosis, staging and treatment selection process. Two types of process modeling techniques, discrete event simulation (DES) and analytical models, are briefly reviewed. Recent developments in DES are outlined and the necessary data and procedures to develop a DES model for lung cancer diagnosis, leading up to surgical treatment process are summarized. The analytical models include both Markov chain model and closed formulas. The Markov chain models with its application in healthcare are introduced and the approach to derive a lung cancer diagnosis process model is presented. Similarly, the procedure to derive closed formulas evaluating the diagnosis process performance is outlined. Finally, the pros and cons of these methods are discussed. PMID:26380181

Accuracy of magnetic resonance based susceptibility measurements

NASA Astrophysics Data System (ADS)

Erdevig, Hannah E.; Russek, Stephen E.; Carnicka, Slavka; Stupic, Karl F.; Keenan, Kathryn E.

2017-05-01

Magnetic Resonance Imaging (MRI) is increasingly used to map the magnetic susceptibility of tissue to identify cerebral microbleeds associated with traumatic brain injury and pathological iron deposits associated with neurodegenerative diseases such as Parkinson's and Alzheimer's disease. Accurate measurements of susceptibility are important for determining oxygen and iron content in blood vessels and brain tissue for use in noninvasive clinical diagnosis and treatment assessments. Induced magnetic fields with amplitude on the order of 100 nT, can be detected using MRI phase images. The induced field distributions can then be inverted to obtain quantitative susceptibility maps. The focus of this research was to determine the accuracy of MRI-based susceptibility measurements using simple phantom geometries and to compare the susceptibility measurements with magnetometry measurements where SI-traceable standards are available. The susceptibilities of paramagnetic salt solutions in cylindrical containers were measured as a function of orientation relative to the static MRI field. The observed induced fields as a function of orientation of the cylinder were in good agreement with simple models. The MRI susceptibility measurements were compared with SQUID magnetometry using NIST-traceable standards. MRI can accurately measure relative magnetic susceptibilities while SQUID magnetometry measures absolute magnetic susceptibility. Given the accuracy of moment measurements of tissue mimicking samples, and the need to look at small differences in tissue properties, the use of existing NIST standard reference materials to calibrate MRI reference structures is problematic and better reference materials are required.

Generative models for clinical applications in computational psychiatry.

PubMed

Frässle, Stefan; Yao, Yu; Schöbi, Dario; Aponte, Eduardo A; Heinzle, Jakob; Stephan, Klaas E

2018-05-01

Despite the success of modern neuroimaging techniques in furthering our understanding of cognitive and pathophysiological processes, translation of these advances into clinically relevant tools has been virtually absent until now. Neuromodeling represents a powerful framework for overcoming this translational deadlock, and the development of computational models to solve clinical problems has become a major scientific goal over the last decade, as reflected by the emergence of clinically oriented neuromodeling fields like Computational Psychiatry, Computational Neurology, and Computational Psychosomatics. Generative models of brain physiology and connectivity in the human brain play a key role in this endeavor, striving for computational assays that can be applied to neuroimaging data from individual patients for differential diagnosis and treatment prediction. In this review, we focus on dynamic causal modeling (DCM) and its use for Computational Psychiatry. DCM is a widely used generative modeling framework for functional magnetic resonance imaging (fMRI) and magneto-/electroencephalography (M/EEG) data. This article reviews the basic concepts of DCM, revisits examples where it has proven valuable for addressing clinically relevant questions, and critically discusses methodological challenges and recent methodological advances. We conclude this review with a more general discussion of the promises and pitfalls of generative models in Computational Psychiatry and highlight the path that lies ahead of us. This article is categorized under: Neuroscience > Computation Neuroscience > Clinical Neuroscience. © 2018 Wiley Periodicals, Inc.

Surface immobilized antibody orientation determined using ToF-SIMS and multivariate analysis.

PubMed

Welch, Nicholas G; Madiona, Robert M T; Payten, Thomas B; Easton, Christopher D; Pontes-Braz, Luisa; Brack, Narelle; Scoble, Judith A; Muir, Benjamin W; Pigram, Paul J

2017-06-01

Antibody orientation at solid phase interfaces plays a critical role in the sensitive detection of biomolecules during immunoassays. Correctly oriented antibodies with solution-facing antigen binding regions have improved antigen capture as compared to their randomly oriented counterparts. Direct characterization of oriented proteins with surface analysis methods still remains a challenge however surface sensitive techniques such as Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) provide information-rich data that can be used to probe antibody orientation. Diethylene glycol dimethyl ether plasma polymers (DGpp) functionalized with chromium (DGpp+Cr) have improved immunoassay performance that is indicative of preferential antibody orientation. Herein, ToF-SIMS data from proteolytic fragments of anti-EGFR antibody bound to DGpp and DGpp+Cr are used to construct artificial neural network (ANN) and principal component analysis (PCA) models indicative of correctly oriented systems. Whole antibody samples (IgG) test against each of the models indicated preferential antibody orientation on DGpp+Cr. Cross-reference between ANN and PCA models yield 20 mass fragments associated with F(ab') 2 region representing correct orientation, and 23 mass fragments associated with the Fc region representing incorrect orientation. Mass fragments were then compared to amino acid fragments and amino acid composition in F(ab') 2 and Fc regions. A ratio of the sum of the ToF-SIMS ion intensities from the F(ab') 2 fragments to the Fc fragments demonstrated a 50% increase in intensity for IgG on DGpp+Cr as compared to DGpp. The systematic data analysis methodology employed herein offers a new approach for the investigation of antibody orientation applicable to a range of substrates. Controlled orientation of antibodies at solid phases is critical for maximizing antigen detection in biosensors and immunoassays. Surface-sensitive techniques (such as ToF-SIMS), capable of direct characterization of surface immobilized and oriented antibodies, are under-utilized in current practice. Selection of a small number of mass fragments for analysis, typically pertaining to amino acids, is commonplace in literature, leaving the majority of the information-rich spectra unanalyzed. The novelty of this work is the utilization of a comprehensive, unbiased mass fragment list and the employment of principal component analysis (PCA) and artificial neural network (ANN) models in a unique methodology to prove antibody orientation. This methodology is of significant and broad interest to the scientific community as it is applicable to a range of substrates and allows for direct, label-free characterization of surface bound proteins. Copyright © 2017 Acta Materialia Inc. All rights reserved.

The implementation of contour-based object orientation estimation algorithm in FPGA-based on-board vision system

NASA Astrophysics Data System (ADS)

Alpatov, Boris; Babayan, Pavel; Ershov, Maksim; Strotov, Valery

2016-10-01

This paper describes the implementation of the orientation estimation algorithm in FPGA-based vision system. An approach to estimate an orientation of objects lacking axial symmetry is proposed. Suggested algorithm is intended to estimate orientation of a specific known 3D object based on object 3D model. The proposed orientation estimation algorithm consists of two stages: learning and estimation. Learning stage is devoted to the exploring of studied object. Using 3D model we can gather set of training images by capturing 3D model from viewpoints evenly distributed on a sphere. Sphere points distribution is made by the geosphere principle. Gathered training image set is used for calculating descriptors, which will be used in the estimation stage of the algorithm. The estimation stage is focusing on matching process between an observed image descriptor and the training image descriptors. The experimental research was performed using a set of images of Airbus A380. The proposed orientation estimation algorithm showed good accuracy in all case studies. The real-time performance of the algorithm in FPGA-based vision system was demonstrated.

Contour-based object orientation estimation

NASA Astrophysics Data System (ADS)

Alpatov, Boris; Babayan, Pavel

2016-04-01

Real-time object orientation estimation is an actual problem of computer vision nowadays. In this paper we propose an approach to estimate an orientation of objects lacking axial symmetry. Proposed algorithm is intended to estimate orientation of a specific known 3D object, so 3D model is required for learning. The proposed orientation estimation algorithm consists of 2 stages: learning and estimation. Learning stage is devoted to the exploring of studied object. Using 3D model we can gather set of training images by capturing 3D model from viewpoints evenly distributed on a sphere. Sphere points distribution is made by the geosphere principle. It minimizes the training image set. Gathered training image set is used for calculating descriptors, which will be used in the estimation stage of the algorithm. The estimation stage is focusing on matching process between an observed image descriptor and the training image descriptors. The experimental research was performed using a set of images of Airbus A380. The proposed orientation estimation algorithm showed good accuracy (mean error value less than 6°) in all case studies. The real-time performance of the algorithm was also demonstrated.

Prediction of intention to continue sport in athlete students: A self-determination theory approach

PubMed Central

Keshtidar, Mohammad; Behzadnia, Behzad

2017-01-01

Grounded on the self-determination theory (Deci & Ryan, 1985, 2000) and achievement goals theory (Ames, 1992; Nicholls, 1989), this study via structural equation modelling, predicted intention to continue in sport from goal orientations and motivations among athlete students. 268 athlete students (Mage = 21.9), in Iranian universities completed a multi-section questionnaire tapping the targeted variables. Structural equation modelling (SEM) offered an overall support for the proposed model. The results showed that there are positive relationships between intention to continue in sport and both orientations as well as both motivations. A task-involving orientation emerged as a positive predictor of the autonomous motivation, while an ego-involving orientation was a positive predictor controlled motivation as well as autonomous motivation. The results also support positive paths between autonomous motivation and future intention to participate in sport. Autonomous motivation also was a positive mediator in relationship between task orientation and the intentions. As a conclusion, the implications of the task-involving orientation are discussabled in the light of its importance for the quality and potential maintenance of sport involvement among athlete students. PMID:28178308

Prediction of intention to continue sport in athlete students: A self-determination theory approach.

PubMed

Keshtidar, Mohammad; Behzadnia, Behzad

2017-01-01

Grounded on the self-determination theory (Deci & Ryan, 1985, 2000) and achievement goals theory (Ames, 1992; Nicholls, 1989), this study via structural equation modelling, predicted intention to continue in sport from goal orientations and motivations among athlete students. 268 athlete students (Mage = 21.9), in Iranian universities completed a multi-section questionnaire tapping the targeted variables. Structural equation modelling (SEM) offered an overall support for the proposed model. The results showed that there are positive relationships between intention to continue in sport and both orientations as well as both motivations. A task-involving orientation emerged as a positive predictor of the autonomous motivation, while an ego-involving orientation was a positive predictor controlled motivation as well as autonomous motivation. The results also support positive paths between autonomous motivation and future intention to participate in sport. Autonomous motivation also was a positive mediator in relationship between task orientation and the intentions. As a conclusion, the implications of the task-involving orientation are discussabled in the light of its importance for the quality and potential maintenance of sport involvement among athlete students.

A Re-Unification of Two Competing Models for Document Retrieval.

ERIC Educational Resources Information Center

Bodoff, David

1999-01-01

Examines query-oriented versus document-oriented information retrieval and feedback learning. Highlights include a reunification of the two approaches for probabilistic document retrieval and for vector space model (VSM) retrieval; learning in VSM and in probabilistic models; multi-dimensional scaling; and ongoing field studies. (LRW)

Anatomy of the ankle ligaments: a pictorial essay

PubMed Central

Vega, Jordi; de Leeuw, Peter A. J.; Malagelada, Francesc; Manzanares, M. Cristina; Götzens, Víctor; van Dijk, C. Niek

2010-01-01

Understanding the anatomy of the ankle ligaments is important for correct diagnosis and treatment. Ankle ligament injury is the most frequent cause of acute ankle pain. Chronic ankle pain often finds its cause in laxity of one of the ankle ligaments. In this pictorial essay, the ligaments around the ankle are grouped, depending on their anatomic orientation, and each of the ankle ligaments is discussed in detail. PMID:20309522

[Aroma and perfume allergy: anathema for some epicurean appeal?].

PubMed

Goffin, V; Nikkels, A F; Cornil, F; Deleixhe-Mauhin, F; Piérard-Franchimont, C; Piérard, G E

2002-09-01

Aromas and fragrances are present in many cosmetics, some topical drugs, food and various hygiene, household and industrial products. They can be responsible for contact dermatitis. Multiple sensitizations can even involve in various combinations some fragrance compounds, a given degradation product or a contaminant. The diagnosis relies on clinical examination and oriented anamnesis. A histological examination is sometimes necessary. Specific path testing brings insight on the culprit chemical compounds.

An exploration for research-oriented teaching model in biology teaching.

PubMed

Xing, Wanjin; Mo, Morigen; Su, Huimin

2014-07-01

Training innovative talents, as one of the major aims for Chinese universities, needs to reform the traditional teaching methods. The research-oriented teaching method has been introduced and its connotation and significance for Chinese university teaching have been discussed for years. However, few practical teaching methods for routine class teaching were proposed. In this paper, a comprehensive and concrete research-oriented teaching model with contents of reference value and evaluation method for class teaching was proposed based on the current teacher-guiding teaching model in China. We proposed that the research-oriented teaching model should include at least seven aspects on: (1) telling the scientific history for the skills to find out scientific questions; (2) replaying the experiments for the skills to solve scientific problems; (3) analyzing experimental data for learning how to draw a conclusion; (4) designing virtual experiments for learning how to construct a proposal; (5) teaching the lesson as the detectives solve the crime for learning the logic in scientific exploration; (6) guiding students how to read and consult the relative references; (7) teaching students differently according to their aptitude and learning ability. In addition, we also discussed how to evaluate the effects of the research-oriented teaching model in examination.

Characterizing the Pain Narratives of Parents of Youth With Chronic Pain.

PubMed

Noel, Melanie; Beals-Erickson, Sarah E; Law, Emily F; Alberts, Nicole M; Palermo, Tonya M

2016-10-01

Questionnaire-based research has shown that parents exert a powerful influence on and are profoundly influenced by living with a child with chronic pain. Examination of parents' pain narratives through an observational lens offers an alternative approach to understanding the complexity of pediatric chronic pain; however, the narratives of parents of youth with chronic pain have been largely overlooked. The present study aimed to characterize the vulnerability-based and resilience-based aspects of the pain narratives of parents of youth with chronic pain. Pain narratives of 46 parents were recorded during the baseline session as part of 2 clinical trials evaluating a behavioral intervention for parents of youth with chronic pain. The narratives were coded for aspects of pain-related vulnerability and resilience. Using exploratory cluster analysis, 2 styles of parents' pain narratives were identified. Distress narratives were characterized by more negative affect and an exclusively unresolved orientation toward the child's diagnosis of chronic pain, whereas resilience narratives were characterized by positive affect and a predominantly resolved orientation toward the child's diagnosis. Preliminary support for the validity of these clusters was provided through our finding of differences between clusters in parental pain catastrophizing about child pain (helplessness). Findings highlight the multidimensional nature of parents' experience of their child's pain problem. Clinical implications in terms of assessment and treatment are discussed.

Continued family smoking after lung cancer diagnosis: the patient's perspective.

PubMed

Bottorff, Joan L; Robinson, Carole A; Sullivan, Kelli M; Smith, Michelle L

2009-05-01

To explore the influence of lung cancer diagnosis on interpersonal dynamics in families in which one or more members continue to smoke following diagnosis. Descriptive, qualitative. Three cancer care sites in western Canada. 16 participants from 8 family dyads. Patients with lung cancer receiving treatment and immediate family members were recruited to participate in individual or conjoint semistructured interviews. Thematic analysis was conducted on transcribed interviews. Intrafamily interaction patterns, smoking and smoking cessation, lung cancer diagnosis. Following diagnosis, patients with lung cancer experienced considerable distress as they struggled to understand family members' continued smoking. Patient orientations to family members who smoked included preserving relationships (maintaining harmony and connection with family members took priority over directly intervening with smokers) and risking relationships (patients repeatedly confronted family members about continued smoking to influence their cessation despite the impact on relationships). Neither pattern was successful in engaging relatives in smoking reduction or cessation, and the risking relationships approach resulted in conflict and strained family relationships. The findings provide additional support for examining family dynamics related to tobacco reduction and cessation as well as directions for future research. Nurses should encourage tobacco reduction as a supportive intervention for patients with lung cancer and their families to eliminate smoking-related distress.

Pattern Adaptation and Normalization Reweighting.

PubMed

Westrick, Zachary M; Heeger, David J; Landy, Michael S

2016-09-21

Adaptation to an oriented stimulus changes both the gain and preferred orientation of neural responses in V1. Neurons tuned near the adapted orientation are suppressed, and their preferred orientations shift away from the adapter. We propose a model in which weights of divisive normalization are dynamically adjusted to homeostatically maintain response products between pairs of neurons. We demonstrate that this adjustment can be performed by a very simple learning rule. Simulations of this model closely match existing data from visual adaptation experiments. We consider several alternative models, including variants based on homeostatic maintenance of response correlations or covariance, as well as feedforward gain-control models with multiple layers, and we demonstrate that homeostatic maintenance of response products provides the best account of the physiological data. Adaptation is a phenomenon throughout the nervous system in which neural tuning properties change in response to changes in environmental statistics. We developed a model of adaptation that combines normalization (in which a neuron's gain is reduced by the summed responses of its neighbors) and Hebbian learning (in which synaptic strength, in this case divisive normalization, is increased by correlated firing). The model is shown to account for several properties of adaptation in primary visual cortex in response to changes in the statistics of contour orientation. Copyright © 2016 the authors 0270-6474/16/369805-12$15.00/0.

A scattering model for forested area

NASA Technical Reports Server (NTRS)

Karam, M. A.; Fung, A. K.

1988-01-01

A forested area is modeled as a volume of randomly oriented and distributed disc-shaped, or needle-shaped leaves shading a distribution of branches modeled as randomly oriented finite-length, dielectric cylinders above an irregular soil surface. Since the radii of branches have a wide range of sizes, the model only requires the length of a branch to be large compared with its radius which may be any size relative to the incident wavelength. In addition, the model also assumes the thickness of a disc-shaped leaf or the radius of a needle-shaped leaf is much smaller than the electromagnetic wavelength. The scattering phase matrices for disc, needle, and cylinder are developed in terms of the scattering amplitudes of the corresponding fields which are computed by the forward scattering theorem. These quantities along with the Kirchoff scattering model for a randomly rough surface are used in the standard radiative transfer formulation to compute the backscattering coefficient. Numerical illustrations for the backscattering coefficient are given as a function of the shading factor, incidence angle, leaf orientation distribution, branch orientation distribution, and the number density of leaves. Also illustrated are the properties of the extinction coefficient as a function of leaf and branch orientation distributions. Comparisons are made with measured backscattering coefficients from forested areas reported in the literature.

A dynamic integrated fault diagnosis method for power transformers.

PubMed

Gao, Wensheng; Bai, Cuifen; Liu, Tong

2015-01-01

In order to diagnose transformer fault efficiently and accurately, a dynamic integrated fault diagnosis method based on Bayesian network is proposed in this paper. First, an integrated fault diagnosis model is established based on the causal relationship among abnormal working conditions, failure modes, and failure symptoms of transformers, aimed at obtaining the most possible failure mode. And then considering the evidence input into the diagnosis model is gradually acquired and the fault diagnosis process in reality is multistep, a dynamic fault diagnosis mechanism is proposed based on the integrated fault diagnosis model. Different from the existing one-step diagnosis mechanism, it includes a multistep evidence-selection process, which gives the most effective diagnostic test to be performed in next step. Therefore, it can reduce unnecessary diagnostic tests and improve the accuracy and efficiency of diagnosis. Finally, the dynamic integrated fault diagnosis method is applied to actual cases, and the validity of this method is verified.

A Dynamic Integrated Fault Diagnosis Method for Power Transformers

PubMed Central

Gao, Wensheng; Liu, Tong

2015-01-01

In order to diagnose transformer fault efficiently and accurately, a dynamic integrated fault diagnosis method based on Bayesian network is proposed in this paper. First, an integrated fault diagnosis model is established based on the causal relationship among abnormal working conditions, failure modes, and failure symptoms of transformers, aimed at obtaining the most possible failure mode. And then considering the evidence input into the diagnosis model is gradually acquired and the fault diagnosis process in reality is multistep, a dynamic fault diagnosis mechanism is proposed based on the integrated fault diagnosis model. Different from the existing one-step diagnosis mechanism, it includes a multistep evidence-selection process, which gives the most effective diagnostic test to be performed in next step. Therefore, it can reduce unnecessary diagnostic tests and improve the accuracy and efficiency of diagnosis. Finally, the dynamic integrated fault diagnosis method is applied to actual cases, and the validity of this method is verified. PMID:25685841

Future Orientation in Times of Threat and Challenge: How Resilient Adolescents Construct Their Future

ERIC Educational Resources Information Center

Seginer, Rachel

2008-01-01

Drawing on the importance of future orientation for adolescent development this analysis presents a model describing how future orientation is affected by high challenge (or resilience) in the face of political violence. The analysis consists of three parts. The first two present future orientation conceptualization and the psychological processes…

Personality Patterns of Physicians in Person-Oriented and Technique-Oriented Specialties

ERIC Educational Resources Information Center

Borges, Nicole J.; Gibson, Denise D.

2005-01-01

This study investigated differences in personality patterns between person-oriented and technique-oriented physicians. It tested an integrative framework by converting the scores on the Personality Research Form (PRF) to the Big-Five factors and built a predictive model of group membership in clinical specialty area. PRF scores from 238 physicians…

An object-oriented computational model to study cardiopulmonary hemodynamic interactions in humans.

PubMed

Ngo, Chuong; Dahlmanns, Stephan; Vollmer, Thomas; Misgeld, Berno; Leonhardt, Steffen

2018-06-01

This work introduces an object-oriented computational model to study cardiopulmonary interactions in humans. Modeling was performed in object-oriented programing language Matlab Simscape, where model components are connected with each other through physical connections. Constitutive and phenomenological equations of model elements are implemented based on their non-linear pressure-volume or pressure-flow relationship. The model includes more than 30 physiological compartments, which belong either to the cardiovascular or respiratory system. The model considers non-linear behaviors of veins, pulmonary capillaries, collapsible airways, alveoli, and the chest wall. Model parameters were derisved based on literature values. Model validation was performed by comparing simulation results with clinical and animal data reported in literature. The model is able to provide quantitative values of alveolar, pleural, interstitial, aortic and ventricular pressures, as well as heart and lung volumes during spontaneous breathing and mechanical ventilation. Results of baseline simulation demonstrate the consistency of the assigned parameters. Simulation results during mechanical ventilation with PEEP trials can be directly compared with animal and clinical data given in literature. Object-oriented programming languages can be used to model interconnected systems including model non-linearities. The model provides a useful tool to investigate cardiopulmonary activity during spontaneous breathing and mechanical ventilation. Copyright © 2018 Elsevier B.V. All rights reserved.

Measurement of Psychological Disorders Using Cognitive Diagnosis Models

ERIC Educational Resources Information Center

Templin, Jonathan L.; Henson, Robert A.

2006-01-01

Cognitive diagnosis models are constrained (multiple classification) latent class models that characterize the relationship of questionnaire responses to a set of dichotomous latent variables. Having emanated from educational measurement, several aspects of such models seem well suited to use in psychological assessment and diagnosis. This article…

Pattern formation of microtubules and motors: inelastic interaction of polar rods.

PubMed

Aranson, Igor S; Tsimring, Lev S

2005-05-01

We derive a model describing spatiotemporal organization of an array of microtubules interacting via molecular motors. Starting from a stochastic model of inelastic polar rods with a generic anisotropic interaction kernel we obtain a set of equations for the local rods concentration and orientation. At large enough mean density of rods and concentration of motors, the model describes orientational instability. We demonstrate that the orientational instability leads to the formation of vortices and (for large density and/or kernel anisotropy) asters seen in recent experiments.

Modeling of layered anisotropic composite material based on effective medium theory

NASA Astrophysics Data System (ADS)

Bao, Yang; Song, Jiming

2018-04-01

In this paper, we present an efficient method to simulate multilayered anisotropic composite material with effective medium theory. Effective permittivity, permeability and orientation angle for a layered anisotropic composite medium are extracted with this equivalent model. We also derive analytical expressions for effective parameters and orientation angle with low frequency (LF) limit, which will be shown in detail. Numerical results are shown in comparing extracted effective parameters and orientation angle with analytical results from low frequency limit. Good agreements are achieved to demonstrate the accuracy of our efficient model.

Model-based analysis of multi-shell diffusion MR data for tractography: How to get over fitting problems

PubMed Central

Jbabdi, Saad; Sotiropoulos, Stamatios N; Savio, Alexander M; Graña, Manuel; Behrens, Timothy EJ

2012-01-01

In this article, we highlight an issue that arises when using multiple b-values in a model-based analysis of diffusion MR data for tractography. The non-mono-exponential decay, commonly observed in experimental data, is shown to induce over-fitting in the distribution of fibre orientations when not considered in the model. Extra fibre orientations perpendicular to the main orientation arise to compensate for the slower apparent signal decay at higher b-values. We propose a simple extension to the ball and stick model based on a continuous Gamma distribution of diffusivities, which significantly improves the fitting and reduces the over-fitting. Using in-vivo experimental data, we show that this model outperforms a simpler, noise floor model, especially at the interfaces between brain tissues, suggesting that partial volume effects are a major cause of the observed non-mono-exponential decay. This model may be helpful for future data acquisition strategies that may attempt to combine multiple shells to improve estimates of fibre orientations in white matter and near the cortex. PMID:22334356

Community-orientated primary health care. The responsibility of the team for the health of the total population.

PubMed

Epstein, L; Eshed, H

1988-02-20

Community-orientated primary health care (COPHC) is presented as a framework for the delivery of primary health care based on the epidemiologically assessed needs of the population. It requires that the health team and the responsible agencies or institutions take upon themselves responsibility for the provision of care in relation to these measured needs of all those persons entitled to the service. This epidemiological diagnosis of community health conditions will include both the measurement of the distribution of health and disease states in the community as well as the possible causes for this distribution--this is in order to plan possible intervention adequately. It is concluded that COPHC is to the advantage of the community, the health team and the health care system.

A history of drug advertising: the evolving roles of consumers and consumer protection.

PubMed

Donohue, Julie

2006-01-01

Direct-to-consumer advertising (DTCA) of prescription drugs in the United States is controversial. Underlying the debate are disagreements over the role of consumers in medical decision making, the appropriateness of consumers engaging in self-diagnosis, and the ethics of an industry promoting potentially dangerous drugs. Drug advertising and federal policy governing drug advertising have both responded to and reinforced changes in the consumer's role in health care and in the doctor-patient relationship over time. This article discusses the history of DTCA in the context of social movements to secure rights for health care patients and consumers, the modern trend toward consumer-oriented medicine, and the implications of DTCA and consumer-oriented medicine for contemporary health policy debates about improving the health care system.

A History of Drug Advertising: The Evolving Roles of Consumers and Consumer Protection

PubMed Central

Donohue, Julie

2006-01-01

Direct-to-consumer advertising (DTCA) of prescription drugs in the United States is controversial. Underlying the debate are disagreements over the role of consumers in medical decision making, the appropriateness of consumers engaging in self-diagnosis, and the ethics of an industry promoting potentially dangerous drugs. Drug advertising and federal policy governing drug advertising have both responded to and reinforced changes in the consumer's role in health care and in the doctor-patient relationship over time. This article discusses the history of DTCA in the context of social movements to secure rights for health care patients and consumers, the modern trend toward consumer-oriented medicine, and the implications of DTCA and consumer-oriented medicine for contemporary health policy debates about improving the health care system. PMID:17096638

A web-based knowledge management system integrating Western and Traditional Chinese Medicine for relational medical diagnosis.

PubMed

Herrera-Hernandez, Maria C; Lai-Yuen, Susana K; Piegl, Les A; Zhang, Xiao

2016-10-26

This article presents the design of a web-based knowledge management system as a training and research tool for the exploration of key relationships between Western and Traditional Chinese Medicine, in order to facilitate relational medical diagnosis integrating these mainstream healing modalities. The main goal of this system is to facilitate decision-making processes, while developing skills and creating new medical knowledge. Traditional Chinese Medicine can be considered as an ancient relational knowledge-based approach, focusing on balancing interrelated human functions to reach a healthy state. Western Medicine focuses on specialties and body systems and has achieved advanced methods to evaluate the impact of a health disorder on the body functions. Identifying key relationships between Traditional Chinese and Western Medicine opens new approaches for health care practices and can increase the understanding of human medical conditions. Our knowledge management system was designed from initial datasets of symptoms, known diagnosis and treatments, collected from both medicines. The datasets were subjected to process-oriented analysis, hierarchical knowledge representation and relational database interconnection. Web technology was implemented to develop a user-friendly interface, for easy navigation, training and research. Our system was prototyped with a case study on chronic prostatitis. This trial presented the system's capability for users to learn the correlation approach, connecting knowledge in Western and Traditional Chinese Medicine by querying the database, mapping validated medical information, accessing complementary information from official sites, and creating new knowledge as part of the learning process. By addressing the challenging tasks of data acquisition and modeling, organization, storage and transfer, the proposed web-based knowledge management system is presented as a tool for users in medical training and research to explore, learn and update relational information for the practice of integrated medical diagnosis. This proposal in education has the potential to enable further creation of medical knowledge from both Traditional Chinese and Western Medicine for improved care providing. The presented system positively improves the information visualization, learning process and knowledge sharing, for training and development of new skills for diagnosis and treatment, and a better understanding of medical diseases. © IMechE 2016.

Understanding the oriented-attachment growth of nanocrystals from an energy point of view: a review

NASA Astrophysics Data System (ADS)

Lv, Weiqiang; He, Weidong; Wang, Xiaoning; Niu, Yinghua; Cao, Huanqi; Dickerson, James H.; Wang, Zhiguo

2014-02-01

Since Penn et al. first discovered the oriented attachment growth of crystals, the oriented attachment mechanism has now become a major research focus in the crystal field, and extensive efforts have been carried out over the past decade to systematically investigate the growth mechanism and the statistical kinetic models. However, most of the work mainly focuses on the experimental results on the oriented attachment growth. In contrast to the previous reviews, our review provides an overview of the recent theoretical advances in oriented attachment kinetics combined with experimental evidences. After a brief introduction to the van der Waals interaction and Coulombic interaction in a colloidal system, the correlation between the kinetic models of oriented attachment growth and the interactions is then our focus. The impact of in situ experimental observation techniques on the study of oriented attachment growth is examined with insightful examples. In addition, the advances in theoretical simulations mainly investigating the thermodynamic origin of these interactions at the atomic level are reviewed. This review seeks to understand the oriented attachment crystal growth from a kinetic point of view and provide a quantitative methodology to rationally design an oriented attachment system with pre-evaluated crystal growth parameters.

A COMPARISON OF THE UCD/CIT AIR QUALITY MODEL AND THE CMB SOURCE-RECEPTOR MODEL FOR PRIMARY AIRBORNE PARTICULATE MATTER. (R831082)

EPA Science Inventory

Source contributions to primary airborne particulate matter calculated using the source-oriented UCD/CIT air quality model and the receptor-oriented chemical mass balance (CMB) model are compared for two air quality episodes in different parts of California. The first episode ...

An object-oriented forest landscape model and its representation of tree species

Treesearch

Hong S. He; David J. Mladenoff; Joel Boeder

1999-01-01

LANDIS is a forest landscape model that simulates the interaction of large landscape processes and forest successional dynamics at tree species level. We discuss how object-oriented design (OOD) approaches such as modularity, abstraction and encapsulation are integrated into the design of LANDIS. We show that using OOD approaches, model decisions (olden as model...

Loneliness and Suicidal Risk in Young Adults: Does Believing in a Changeable Future Help Minimize Suicidal Risk Among the Lonely?

PubMed

Chang, Edward C; Wan, Liangqiu; Li, Pengzi; Guo, Yuncheng; He, Jiaying; Gu, Yu; Wang, Yingjie; Li, Xiaoqing; Zhang, Zhan; Sun, Yingrui; Batterbee, Casey N-H; Chang, Olivia D; Lucas, Abigael G; Hirsch, Jameson K

2017-07-04

This study examined loneliness and future orientation as predictors of suicidal risk, namely, depressive symptoms and suicide ideation, in a sample of 228 college students (54 males and 174 females). Results of regression analyses indicated that loneliness was a significant predictor of both indices of suicidal risk. The inclusion of future orientation was found to significantly augment the prediction model of both depressive symptoms and suicide ideation, even after accounting for loneliness. Noteworthy, beyond loneliness and future orientation, the Loneliness × Future Orientation interaction term was found to further augment both prediction models of suicidal risk. Consistent with the notion that future orientation is an important buffer of suicidal risk, among lonely students, those with high future orientation, compared to low future orientation, were found to report significantly lower levels of depressive symptoms and suicide ideation. Some implications of the present findings for studying both risk and protective factors associated with suicidal risk in young adults are discussed.

Mechanical Forces Program the Orientation of Cell Division during Airway Tube Morphogenesis.

PubMed

Tang, Zan; Hu, Yucheng; Wang, Zheng; Jiang, Kewu; Zhan, Cheng; Marshall, Wallace F; Tang, Nan

2018-02-05

Oriented cell division plays a key role in controlling organogenesis. The mechanisms for regulating division orientation at the whole-organ level are only starting to become understood. By combining 3D time-lapse imaging, mouse genetics, and mathematical modeling, we find that global orientation of cell division is the result of a combination of two types of spindles with distinct spindle dynamic behaviors in the developing airway epithelium. Fixed spindles follow the classic long-axis rule and establish their division orientation before metaphase. In contrast, rotating spindles do not strictly follow the long-axis rule and determine their division orientation during metaphase. By using both a cell-based mechanical model and stretching-lung-explant experiments, we showed that mechanical force can function as a regulatory signal in maintaining the stable ratio between fixed spindles and rotating spindles. Our findings demonstrate that mechanical forces, cell geometry, and oriented cell division function together in a highly coordinated manner to ensure normal airway tube morphogenesis. Copyright © 2017 Elsevier Inc. All rights reserved.

Modeling Gameplay Enjoyment, Goal Orientations, and Individual Characteristics

ERIC Educational Resources Information Center

Quick, John M.; Atkinson, Robert K.

2014-01-01

The purpose of this study was to investigate the relationships between gameplay enjoyment, gaming goal orientations, and individual characteristics. A total of 301 participants were surveyed and the data were analyzed using structural equation modeling. This led to an expanded Gameplay Enjoyment Model (GEM) with 41 game design features that…

A Model of Metacognition, Achievement Goal Orientation, Learning Style and Self-Efficacy

ERIC Educational Resources Information Center

Coutinho, Savia A.; Neuman, George

2008-01-01

Structural equation modelling was used to test a model integrating achievement goal orientation, learning style, self-efficacy and metacognition into a single framework that explained and predicted variation in performance. Self-efficacy was the strongest predictor of performance. Metacognition was a weak predictor of performance. Deep processing…

Modeling human perception of orientation in altered gravity

PubMed Central

Clark, Torin K.; Newman, Michael C.; Oman, Charles M.; Merfeld, Daniel M.; Young, Laurence R.

2015-01-01

Altered gravity environments, such as those experienced by astronauts, impact spatial orientation perception, and can lead to spatial disorientation and sensorimotor impairment. To more fully understand and quantify the impact of altered gravity on orientation perception, several mathematical models have been proposed. The utricular shear, tangent, and the idiotropic vector models aim to predict static perception of tilt in hyper-gravity. Predictions from these prior models are compared to the available data, but are found to systematically err from the perceptions experimentally observed. Alternatively, we propose a modified utricular shear model for static tilt perception in hyper-gravity. Previous dynamic models of vestibular function and orientation perception are limited to 1 G. Specifically, they fail to predict the characteristic overestimation of roll tilt observed in hyper-gravity environments. To address this, we have proposed a modification to a previous observer-type canal-otolith interaction model based upon the hypothesis that the central nervous system (CNS) treats otolith stimulation in the utricular plane differently than stimulation out of the utricular plane. Here we evaluate our modified utricular shear and modified observer models in four altered gravity motion paradigms: (a) static roll tilt in hyper-gravity, (b) static pitch tilt in hyper-gravity, (c) static roll tilt in hypo-gravity, and (d) static pitch tilt in hypo-gravity. The modified models match available data in each of the conditions considered. Our static modified utricular shear model and dynamic modified observer model may be used to help quantitatively predict astronaut perception of orientation in altered gravity environments. PMID:25999822

The Use of Object-Oriented Analysis Methods in Surety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard L.; Funkhouser, Donald R.; Wyss, Gregory D.

1999-05-01

Object-oriented analysis methods have been used in the computer science arena for a number of years to model the behavior of computer-based systems. This report documents how such methods can be applied to surety analysis. By embodying the causality and behavior of a system in a common object-oriented analysis model, surety analysts can make the assumptions that underlie their models explicit and thus better communicate with system designers. Furthermore, given minor extensions to traditional object-oriented analysis methods, it is possible to automatically derive a wide variety of traditional risk and reliability analysis methods from a single common object model. Automaticmore » model extraction helps ensure consistency among analyses and enables the surety analyst to examine a system from a wider variety of viewpoints in a shorter period of time. Thus it provides a deeper understanding of a system's behaviors and surety requirements. This report documents the underlying philosophy behind the common object model representation, the methods by which such common object models can be constructed, and the rules required to interrogate the common object model for derivation of traditional risk and reliability analysis models. The methodology is demonstrated in an extensive example problem.« less

A spherical model for orientation and spatial-frequency tuning in a cortical hypercolumn.

PubMed Central

Bressloff, Paul C; Cowan, Jack D

2003-01-01

A theory is presented of the way in which the hypercolumns in primary visual cortex (V1) are organized to detect important features of visual images, namely local orientation and spatial-frequency. Given the existence in V1 of dual maps for these features, both organized around orientation pinwheels, we constructed a model of a hypercolumn in which orientation and spatial-frequency preferences are represented by the two angular coordinates of a sphere. The two poles of this sphere are taken to correspond, respectively, to high and low spatial-frequency preferences. In Part I of the paper, we use mean-field methods to derive exact solutions for localized activity states on the sphere. We show how cortical amplification through recurrent interactions generates a sharply tuned, contrast-invariant population response to both local orientation and local spatial frequency, even in the case of a weakly biased input from the lateral geniculate nucleus (LGN). A major prediction of our model is that this response is non-separable with respect to the local orientation and spatial frequency of a stimulus. That is, orientation tuning is weaker around the pinwheels, and there is a shift in spatial-frequency tuning towards that of the closest pinwheel at non-optimal orientations. In Part II of the paper, we demonstrate that a simple feed-forward model of spatial-frequency preference, unlike that for orientation preference, does not generate a faithful representation when amplified by recurrent interactions in V1. We then introduce the idea that cortico-geniculate feedback modulates LGN activity to generate a faithful representation, thus providing a new functional interpretation of the role of this feedback pathway. Using linear filter theory, we show that if the feedback from a cortical cell is taken to be approximately equal to the reciprocal of the corresponding feed-forward receptive field (in the two-dimensional Fourier domain), then the mismatch between the feed-forward and cortical frequency representations is eliminated. We therefore predict that cortico-geniculate feedback connections innervate the LGN in a pattern determined by the orientation and spatial-frequency biases of feed-forward receptive fields. Finally, we show how recurrent cortical interactions can generate cross-orientation suppression. PMID:14561324

Cross-orientation suppression in human visual cortex

PubMed Central

Heeger, David J.

2011-01-01

Cross-orientation suppression was measured in human primary visual cortex (V1) to test the normalization model. Subjects viewed vertical target gratings (of varying contrasts) with or without a superimposed horizontal mask grating (fixed contrast). We used functional magnetic resonance imaging (fMRI) to measure the activity in each of several hypothetical channels (corresponding to subpopulations of neurons) with different orientation tunings and fit these orientation-selective responses with the normalization model. For the V1 channel maximally tuned to the target orientation, responses increased with target contrast but were suppressed when the horizontal mask was added, evident as a shift in the contrast gain of this channel's responses. For the channel maximally tuned to the mask orientation, a constant baseline response was evoked for all target contrasts when the mask was absent; responses decreased with increasing target contrast when the mask was present. The normalization model provided a good fit to the contrast-response functions with and without the mask. In a control experiment, the target and mask presentations were temporally interleaved, and we found no shift in contrast gain, i.e., no evidence for suppression. We conclude that the normalization model can explain cross-orientation suppression in human visual cortex. The approach adopted here can be applied broadly to infer, simultaneously, the responses of several subpopulations of neurons in the human brain that span particular stimulus or feature spaces, and characterize their interactions. In addition, it allows us to investigate how stimuli are represented by the inferred activity of entire neural populations. PMID:21775720

VAS: A Vision Advisor System combining agents and object-oriented databases

NASA Technical Reports Server (NTRS)

Eilbert, James L.; Lim, William; Mendelsohn, Jay; Braun, Ron; Yearwood, Michael

1994-01-01

A model-based approach to identifying and finding the orientation of non-overlapping parts on a tray has been developed. The part models contain both exact and fuzzy descriptions of part features, and are stored in an object-oriented database. Full identification of the parts involves several interacting tasks each of which is handled by a distinct agent. Using fuzzy information stored in the model allowed part features that were essentially at the noise level to be extracted and used for identification. This was done by focusing attention on the portion of the part where the feature must be found if the current hypothesis of the part ID is correct. In going from one set of parts to another the only thing that needs to be changed is the database of part models. This work is part of an effort in developing a Vision Advisor System (VAS) that combines agents and objected-oriented databases.

Mixture modeling methods for the assessment of normal and abnormal personality, part I: cross-sectional models.

PubMed

Hallquist, Michael N; Wright, Aidan G C

2014-01-01

Over the past 75 years, the study of personality and personality disorders has been informed considerably by an impressive array of psychometric instruments. Many of these tests draw on the perspective that personality features can be conceptualized in terms of latent traits that vary dimensionally across the population. A purely trait-oriented approach to personality, however, might overlook heterogeneity that is related to similarities among subgroups of people. This article describes how factor mixture modeling (FMM), which incorporates both categories and dimensions, can be used to represent person-oriented and trait-oriented variability in the latent structure of personality. We provide an overview of different forms of FMM that vary in the degree to which they emphasize trait- versus person-oriented variability. We also provide practical guidelines for applying FMM to personality data, and we illustrate model fitting and interpretation using an empirical analysis of general personality dysfunction.

Integrated care: wellness-oriented peer approaches: a key ingredient for integrated care.

PubMed

Swarbrick, Margaret A

2013-08-01

People with lived experience of mental illness have become leaders of an influential movement to help the mental health system embrace the notion of whole health and wellness in the areas of advocacy, policy, and care delivery. Wellness-oriented peer approaches delivered by peer-support whole-health specialists and wellness coaches can play an important role in integrated care models. This column examines the wellness definitions and peer models and some specific benefits and tensions between the peer-oriented wellness approach and the medical model. These models can work in unison to improve health and wellness among people with mental and substance use disorders.

Diagnosing Students' Mental Models via the Web-Based Mental Models Diagnosis System

ERIC Educational Resources Information Center

Wang, Tzu-Hua; Chiu, Mei-Hung; Lin, Jing-Wen; Chou, Chin-Cheng

2013-01-01

Mental models play an important role in science education research. To extend the effectiveness of conceptual change research and to improve mental model identi?cation and diagnosis, the authors developed and tested the Web-Based Mental Models Diagnosis (WMMD) system. In this article, they describe their WMMD system, which goes beyond the…

Simulation of Orientation in Injection Molding of High Aspect Ratio Particle Thermoplastic Composites

NASA Astrophysics Data System (ADS)

Vélez-García, Gregorio M.; Ortman, Kevin C.; Eberle, Aaron P. R.; Wapperom, Peter; Baird, Donald G.

2008-07-01

A 2D coupled Hele-Shaw flow approximation for predicting the flow-induced orientation of high aspect ratio particles in injection molded composite parts is presented. For a highly concentrated short glass fiber PBT suspension, the impact of inter-particle interactions and the orientation at the gate is investigated for a center-gated disk using material parameters determined from rheometry. Experimental orientation is determined from confocal laser micrographs using the methods of ellipses. The constitutive equations are discretized using discontinuous Galerkin Finite Elements. Model predictions are significantly improved by using a localized orientation measured experimentally at the gate region instead of random or averaged gapwise measured orientation assumed in previous studies. The predicted profile in different radial positions can be related to the layered structure along the gapwise direction. Model modifications including interactions have lower impact than the initial conditions.

Processing-microstructure models for short- and long-fiber thermoplastic composites

NASA Astrophysics Data System (ADS)

Phelps, Jay H.

The research for this thesis has explored the important microstructural variables for injection-molded thermoplastic composites with discontinuous fiber reinforcement. Two variables, the distributions of fiber orientation and fiber length after processing, have proven to be not only important for correct material property prediction but also difficult to predict using currently available modeling and simulation techniques. In this work, we develop new models for the prediction of these two microstructural variables. Previously, the Folgar-Tucker model has been widely used to predict fiber orientation in injection molded SFT composites. This model accounts for the effects of both hydrodynamics and fiber-fiber interactions in order to give a prediction for a tensorial measure of fiber orientation. However, when applied to at least some classes of LFTs, this model does not match all components of experimental fiber orientation tensor data. In order to address this shortcoming of the model, we hypothesize that Folgar and Tucker's phenomenological treatment of the effects of fiber-fiber interactions with an isotropic rotary diffusion contribution to the rate of change of orientation is insufficient for materials with longer fibers. Instead, this work develops a fiber orientation model that incorporates anisotropic rotary diffusion (ARD). From kinetic theory we derive a general family of evolution equations for the second-order orientation tensor, correcting errors in earlier treatments, and identify a specific equation that is useful for predicting orientation in LFTs. The amount of diffusivity in this model used to approximate the effect of fiber-fiber interactions in each direction is assumed to depend on a second-order space tensor, which is taken to be a function of the orientation state and the rate of deformation. Also, concentrated fiber suspensions align more slowly with respect to strain than the Folgar-Tucker model predicts. Here, we borrow the technique of Wang et al. (2008) to incorporate this behavior in an objective fashion in this new model. Model parameters are selected by matching the experimental steady-state orientation in simple shear flow, and by requiring stable steady states and physically realizable solutions. Utilizing two separate techniques, we identify model parameters for three different materials. We then show that once a set of parameters that meets all previously established criteria has been identified, the differences in model behavior are negligible within that set of parameters. The final model with the proper parameter set is suitable for use in mold filling and other flow simulations, and does give improved predictions of fiber orientation for injection molded LFTs. Although significant fiber length degradation in LFTs has been observed both in literature and in this work, there are no quantitative fiber breakage models to predict either fiber length distributions or average fiber length measures. This work reviews the suspected causes of fiber breakage during the processing of discontinuously-reinforced thermoplastics, specifically LFTs, and introduces a phenomenological fiber breakage model based on the buckling force in a hydrodynamically loaded fiber. This breakage model is incorporated into a conservation equation for total fiber length, and a phenomenological model for the evolution of the fiber length distribution is developed. From this model, we also develop separate, approximate models for the evolution of both the number-average and weight-average fiber length measures. By applying these models to both a simple numerical example and a more complex mold-filling simulation, a qualitative agreement between experiment and prediction is observed. Although these results are promising, the breakage models have only been applied to the mold cavity in injection molding simulation. Both a literature review and our experimental data strongly suggest that the majority of fiber length degradation occurs in the earlier stages of injection molding, in the screw nozzle, runners, and gate. A better understanding of the melting and flow conditions upstream of the mold cavity, the simulation of which is beyond the scope of this work, is needed before these breakage models can be properly applied to the entire injection molding process. (Abstract shortened by UMI.)

Proposed declassification of disease categories related to sexual orientation in the International Statistical Classification of Diseases and Related Health Problems (ICD-11).

PubMed

Cochran, Susan D; Drescher, Jack; Kismödi, Eszter; Giami, Alain; García-Moreno, Claudia; Atalla, Elham; Marais, Adele; Vieira, Elisabeth Meloni; Reed, Geoffrey M

2014-09-01

The World Health Organization is developing the 11th revision of the International Statistical Classification of Diseases and Related Health Problems (ICD-11), planned for publication in 2017. The Working Group on the Classification of Sexual Disorders and Sexual Health was charged with reviewing and making recommendations on disease categories related to sexuality in the chapter on mental and behavioural disorders in the 10th revision (ICD-10), published in 1990. This chapter includes categories for diagnoses based primarily on sexual orientation even though ICD-10 states that sexual orientation alone is not a disorder. This article reviews the scientific evidence and clinical rationale for continuing to include these categories in the ICD. A review of the evidence published since 1990 found little scientific interest in these categories. In addition, the Working Group found no evidence that they are clinically useful: they neither contribute to health service delivery or treatment selection nor provide essential information for public health surveillance. Moreover, use of these categories may create unnecessary harm by delaying accurate diagnosis and treatment. The Working Group recommends that these categories be deleted entirely from ICD-11. Health concerns related to sexual orientation can be better addressed using other ICD categories.

Time Orientation and 10 Years Risk of Dementia in Elderly Adults: The Three-City Study.

PubMed

Dumurgier, Julien; Dartigues, Jean-François; Gabelle, Audrey; Paquet, Claire; Prevot, Magali; Hugon, Jacques; Tzourio, Christophe

2016-07-01

Time disorientation is commonly observed in dementia, however very little is known about the pathological significance of minor time errors in community-dwelling population. Our objective was to investigate the relationship between time orientation and risk of dementia in a population of older adults. Analyses relies on 8611 dementia-free subjects from the Three-City Study, France. Participants were followed up for 10 years for incident dementia. Time orientation was assessed by asking for the date, the day of the week, the month, the season and the year. At baseline, 905 subjects made at least one error in time orientation. During 57,073 person-years of follow-up, 827 participants developed dementia. After controlling for age, gender and education level, subjects with one error in time had a greater risk of dementia (hazard ratio [HR] 1.44 [1.18-1.77]), while those with at least 2 errors had a more than three-fold increased risk (HR 3.10 [1.98-4.83]). This association was particularly marked for the diagnosis of probable Alzheimer's disease. Time disorientation was associated with an increased risk of dementia in a large population of cognitively normal older people followed during up to 10 years and should not be underestimated in clinical setting.

Proposed declassification of disease categories related to sexual orientation in the International Statistical Classification of Diseases and Related Health Problems (ICD-11)

PubMed Central

Drescher, Jack; Kismödi, Eszter; Giami, Alain; García-Moreno, Claudia; Atalla, Elham; Marais, Adele; Vieira, Elisabeth Meloni; Reed, Geoffrey M

2014-01-01

Abstract The World Health Organization is developing the 11th revision of the International Statistical Classification of Diseases and Related Health Problems (ICD-11), planned for publication in 2017. The Working Group on the Classification of Sexual Disorders and Sexual Health was charged with reviewing and making recommendations on disease categories related to sexuality in the chapter on mental and behavioural disorders in the 10th revision (ICD-10), published in 1990. This chapter includes categories for diagnoses based primarily on sexual orientation even though ICD-10 states that sexual orientation alone is not a disorder. This article reviews the scientific evidence and clinical rationale for continuing to include these categories in the ICD. A review of the evidence published since 1990 found little scientific interest in these categories. In addition, the Working Group found no evidence that they are clinically useful: they neither contribute to health service delivery or treatment selection nor provide essential information for public health surveillance. Moreover, use of these categories may create unnecessary harm by delaying accurate diagnosis and treatment. The Working Group recommends that these categories be deleted entirely from ICD-11. Health concerns related to sexual orientation can be better addressed using other ICD categories. PMID:25378758

A new service-oriented grid-based method for AIoT application and implementation

NASA Astrophysics Data System (ADS)

Zou, Yiqin; Quan, Li

2017-07-01

The traditional three-layer Internet of things (IoT) model, which includes physical perception layer, information transferring layer and service application layer, cannot express complexity and diversity in agricultural engineering area completely. It is hard to categorize, organize and manage the agricultural things with these three layers. Based on the above requirements, we propose a new service-oriented grid-based method to set up and build the agricultural IoT. Considering the heterogeneous, limitation, transparency and leveling attributes of agricultural things, we propose an abstract model for all agricultural resources. This model is service-oriented and expressed with Open Grid Services Architecture (OGSA). Information and data of agricultural things were described and encapsulated by using XML in this model. Every agricultural engineering application will provide service by enabling one application node in this service-oriented grid. Description of Web Service Resource Framework (WSRF)-based Agricultural Internet of Things (AIoT) and the encapsulation method were also discussed in this paper for resource management in this model.

Study and application of acoustic emission testing in fault diagnosis of low-speed heavy-duty gears.

PubMed

Gao, Lixin; Zai, Fenlou; Su, Shanbin; Wang, Huaqing; Chen, Peng; Liu, Limei

2011-01-01

Most present studies on the acoustic emission signals of rotating machinery are experiment-oriented, while few of them involve on-spot applications. In this study, a method of redundant second generation wavelet transform based on the principle of interpolated subdivision was developed. With this method, subdivision was not needed during the decomposition. The lengths of approximation signals and detail signals were the same as those of original ones, so the data volume was twice that of original signals; besides, the data redundancy characteristic also guaranteed the excellent analysis effect of the method. The analysis of the acoustic emission data from the faults of on-spot low-speed heavy-duty gears validated the redundant second generation wavelet transform in the processing and denoising of acoustic emission signals. Furthermore, the analysis illustrated that the acoustic emission testing could be used in the fault diagnosis of on-spot low-speed heavy-duty gears and could be a significant supplement to vibration testing diagnosis.

Resilience in Patients With Recent Diagnosis of a Schizophrenia Spectrum Disorder.

PubMed

Bozikas, Vasilis P; Parlapani, Eleni; Holeva, Vasiliki; Skemperi, Eleni; Bargiota, Stavroula I; Kirla, Danai; Rera, Eirini; Garyfallos, Georgios

2016-08-01

This study focused on resilience in patients who recently received a diagnosis of schizophrenia spectrum disorder (SSD). Psychopathological symptoms, depressive symptoms, and hopelessness were considered as sources of stress in the context of psychosis. Forty-eight SSD patients (mean period between diagnosis and recruitment, 20.79 months) were enrolled. Psychopathological symptoms were assessed by the Positive and Negative Syndrome Scale, depression by the Calgary Depression Scale for Schizophrenia, hopelessness by the Beck Hopelessness Scale, and functioning by the Social and Occupational Functioning Scale. Resilience was evaluated by the Connor-Davidson Resilience Scale, which was additionally completed by 81 healthy controls. Patients demonstrated less resilience than did healthy participants. Female patients showed higher resilience levels and functioning than did males. High resilience levels were associated with less severe positive symptoms, general psychopathological symptoms, depression, and hopelessness. Apart from negative symptoms, results indicated that resilience may be a potential moderator of functioning. Thus, resilience-oriented interventions might constitute an additional therapeutic approach for SSD patients.

A study of thermographic diagnosis system and imaging algorithm by distributed thermal data using single infrared sensor.

PubMed

Yoon, Se Jin; Noh, Si Cheol; Choi, Heung Ho

2007-01-01

The infrared diagnosis device provides two-dimensional images and patient-oriented results that can be easily understood by the inspection target by using infrared cameras; however, it has disadvantages such as large size, high price, and inconvenient maintenance. In this regard, this study has proposed small-sized diagnosis device for body heat using a single infrared sensor and implemented an infrared detection system using a single infrared sensor and an algorithm that represents thermography using the obtained data on the temperature of the point source. The developed systems had the temperature resolution of 0.1 degree and the reproducibility of +/-0.1 degree. The accuracy was 90.39% at the error bound of +/-0 degree and 99.98% at that of +/-0.1 degree. In order to evaluate the proposed algorithm and system, the infrared images of camera method was compared. The thermal images that have clinical meaning were obtained from a patient who has lesion to verify its clinical applicability.

Study and Application of Acoustic Emission Testing in Fault Diagnosis of Low-Speed Heavy-Duty Gears

PubMed Central

Gao, Lixin; Zai, Fenlou; Su, Shanbin; Wang, Huaqing; Chen, Peng; Liu, Limei

2011-01-01

Most present studies on the acoustic emission signals of rotating machinery are experiment-oriented, while few of them involve on-spot applications. In this study, a method of redundant second generation wavelet transform based on the principle of interpolated subdivision was developed. With this method, subdivision was not needed during the decomposition. The lengths of approximation signals and detail signals were the same as those of original ones, so the data volume was twice that of original signals; besides, the data redundancy characteristic also guaranteed the excellent analysis effect of the method. The analysis of the acoustic emission data from the faults of on-spot low-speed heavy-duty gears validated the redundant second generation wavelet transform in the processing and denoising of acoustic emission signals. Furthermore, the analysis illustrated that the acoustic emission testing could be used in the fault diagnosis of on-spot low-speed heavy-duty gears and could be a significant supplement to vibration testing diagnosis. PMID:22346592

The impact of machine learning techniques in the study of bipolar disorder: A systematic review.

PubMed

Librenza-Garcia, Diego; Kotzian, Bruno Jaskulski; Yang, Jessica; Mwangi, Benson; Cao, Bo; Pereira Lima, Luiza Nunes; Bermudez, Mariane Bagatin; Boeira, Manuela Vianna; Kapczinski, Flávio; Passos, Ives Cavalcante

2017-09-01

Machine learning techniques provide new methods to predict diagnosis and clinical outcomes at an individual level. We aim to review the existing literature on the use of machine learning techniques in the assessment of subjects with bipolar disorder. We systematically searched PubMed, Embase and Web of Science for articles published in any language up to January 2017. We found 757 abstracts and included 51 studies in our review. Most of the included studies used multiple levels of biological data to distinguish the diagnosis of bipolar disorder from other psychiatric disorders or healthy controls. We also found studies that assessed the prediction of clinical outcomes and studies using unsupervised machine learning to build more consistent clinical phenotypes of bipolar disorder. We concluded that given the clinical heterogeneity of samples of patients with BD, machine learning techniques may provide clinicians and researchers with important insights in fields such as diagnosis, personalized treatment and prognosis orientation. Copyright © 2017 Elsevier Ltd. All rights reserved.

The development of personal models of diabetes in the first 2 years after diagnosis: a prospective longitudinal study.

PubMed

Lawson, V L; Bundy, C; Harvey, J N

2008-04-01

Personal models of diabetes comprise beliefs about symptoms, treatment effectiveness, consequences and emotional responses to possible future complications. They are associated with, and influence, self-care behaviour. Little work has examined potential influences on the development and maintenance of personal models. The aims of this study were: (i) to assess changes in personal models over 2 years from diagnosis of diabetes; and (ii) to examine the relative contributions of health threat communication (at diagnosis, since diagnosis, during follow-up care) and personality to personal models of diabetes 2 years post-diagnosis. Newly diagnosed patients were interviewed at diagnosis (< 3 months; time 1) and 6 months (time 2), 1 year (time 3) and 2 years (time 4) after diagnosis. Data were available for 158 patients at time 1 (32 Type 1 patients and 126 Type 2 patients), 147 at time 2, 142 at time 3 and 138 at time 4. Perceptions of symptoms, consequences, course and control of diabetes remained stable over time. Emotional responses decreased and illness coherence (perceived understanding) increased over time. Health threat communication was a stronger predictor of personal models than personality. Emotional responses to diabetes 2 years after diagnosis were predicted by perceptions of a threatening health message (at diagnosis 18%, at follow-up 5%). Health threat communication predicted perceptions of serious consequences (at diagnosis 5%, at follow-up 9%). Perceptions of a reassuring message during follow-up were related to beliefs of treatment effectiveness (26%). The communication of information and the way it is perceived is an important determinant of the patient's view of their diabetes. The initial effects of the education process at diagnosis persisted 2 years after diagnosis.

Attitudes of palliative care clinical staff toward prolonged grief disorder diagnosis and grief interventions.

PubMed

Davis, Esther L; Deane, Frank P; Barclay, Gregory D; Bourne, Joan; Connolly, Vivienne

2017-07-03

The provision of psychological support to caregivers is an important part of the role of the clinical staff working in palliative care. Staff knowledge and attitudes may determine their openness to referring caregivers to a psychological intervention. We recently developed a self-help intervention for grief and psychological distress among caregivers and were interested in exploring the extent to which staff knowledge and attitudes might affect future implementation. The aims of our study were to: (1) examine the acceptability of self-help psychological intervention for caregivers among palliative care clinical staff; (2) examine potential attitudinal barriers toward prolonged grief disorder (PGD) as a diagnosis and interventions for grief; and (3) bolster staff confidence in skills and knowledge in identifying and managing caregiver psychological distress. An anonymous survey was distributed among clinical staff at two inpatient units and two community health services that assessed the acceptability of self-help interventions for caregivers, attitudes about PGD diagnosis and grief intervention, and staff confidence in skills and knowledge in assessing caregiver psychological distress. Overall, clinical staff were positively oriented toward self-help for caregivers and intervention for grief. They were also basically confident in their skills and knowledge. While it was positive PGD attitudes that were associated with acceptability of self-help for caregivers, it was both positive and negative PGD attitudes that were associated more specifically with a willingness to refer caregivers to such an intervention. Our findings are useful in highlighting the issues to be considered in the implementation of a self-help intervention within the healthcare service. Clinical staff seemed positively oriented toward engaging with a psychological intervention for caregivers and likely to act as key allies in implementation.

Fear of cancer progression and cancer-related intrusive cognitions in breast cancer survivors.

PubMed

Mehnert, Anja; Berg, Petra; Henrich, Gerhard; Herschbach, Peter

2009-12-01

To assess the character and frequency of fear of progression (FoP) and to clarify its relationship with cancer-related intrusive cognitions in breast cancer survivors. A sample of 1083 patients was recruited in this cross-sectional study through a population-based Cancer Registry an average of 47 month following diagnosis (66% response rate). Participants completed self-report measures assessing fear of cancer progression (FoP-Q-SF), posttraumatic stress-disorder symptoms (PCL-C), coping strategies (DWI) and quality of life (QoL) (SF-8). In total, 23.6% of women were classified as having moderate to high FoP. Being nervous prior to doctors' appointments or examinations and being afraid of relying on strangers for activities of daily living were the most frequent fears. FoP was significantly associated with younger age, having children, disease progress, chemotherapy, perceived amount of impairments, physical and mental QoL, but not with time since initial diagnosis. Intrusive cognitions were screened in 37% of the sample. We found significant correlations between FoP and intrusive thoughts (r=0.63), avoidance (r=0.57), hyperarousal (r=0.54) and posttraumatic stress disorder diagnosis (r=0.42). Factors significantly associated with moderate and high FoP included a depressive coping style as well as an active problem-oriented coping style, intrusion, avoidance and hyperarousal symptoms (Nagelkerke's R(2)=0.44). Findings of this study give information regarding the frequency and the character of anxiety in breast cancer survivors and underline the relation of FoP to the reality of living with breast cancer. Results suggest that intrusive cognitions as well as avoidance and hyperarousal symptoms seem to be closely related to future-oriented fears of cancer recurrence.

Implementation of warm-cloud processes in a source-oriented WRF/Chem model to study the effect of aerosol mixing state on fog formation in the Central Valley of California

NASA Astrophysics Data System (ADS)

Lee, H.-H.; Chen, S.-H.; Kleeman, M. J.; Zhang, H.; DeNero, S. P.; Joe, D. K.

2015-11-01

The source-oriented Weather Research and Forecasting chemistry model (SOWC) was modified to include warm cloud processes and applied to investigate how aerosol mixing states influence fog formation and optical properties in the atmosphere. SOWC tracks a 6-dimensional chemical variable (X, Z, Y, Size Bins, Source Types, Species) through an explicit simulation of atmospheric chemistry and physics. A source-oriented cloud condensation nuclei module was implemented into the SOWC model to simulate warm clouds using the modified two-moment Purdue Lin microphysics scheme. The Goddard shortwave and longwave radiation schemes were modified to interact with source-oriented aerosols and cloud droplets so that aerosol direct and indirect effects could be studied. The enhanced SOWC model was applied to study a fog event that occurred on 17 January 2011, in the Central Valley of California. Tule fog occurred because an atmospheric river effectively advected high moisture into the Central Valley and nighttime drainage flow brought cold air from mountains into the valley. The SOWC model produced reasonable liquid water path, spatial distribution and duration of fog events. The inclusion of aerosol-radiation interaction only slightly modified simulation results since cloud optical thickness dominated the radiation budget in fog events. The source-oriented mixture representation of particles reduced cloud droplet number relative to the internal mixture approach that artificially coats hydrophobic particles with hygroscopic components. The fraction of aerosols activating into CCN at a supersaturation of 0.5 % in the Central Valley decreased from 94 % in the internal mixture model to 80 % in the source-oriented model. This increased surface energy flux by 3-5 W m-2 and surface temperature by as much as 0.25 K in the daytime.

Robotic virtual reality simulation plus standard robotic orientation versus standard robotic orientation alone: a randomized controlled trial.

PubMed

Vaccaro, Christine M; Crisp, Catrina C; Fellner, Angela N; Jackson, Christopher; Kleeman, Steven D; Pavelka, James

2013-01-01

The objective of this study was to compare the effect of virtual reality simulation training plus robotic orientation versus robotic orientation alone on performance of surgical tasks using an inanimate model. Surgical resident physicians were enrolled in this assessor-blinded randomized controlled trial. Residents were randomized to receive either (1) robotic virtual reality simulation training plus standard robotic orientation or (2) standard robotic orientation alone. Performance of surgical tasks was assessed at baseline and after the intervention. Nine of 33 modules from the da Vinci Skills Simulator were chosen. Experts in robotic surgery evaluated each resident's videotaped performance of the inanimate model using the Global Rating Scale (GRS) and Objective Structured Assessment of Technical Skills-modified for robotic-assisted surgery (rOSATS). Nine resident physicians were enrolled in the simulation group and 9 in the control group. As a whole, participants improved their total time, time to incision, and suture time from baseline to repeat testing on the inanimate model (P = 0.001, 0.003, <0.001, respectively). Both groups improved their GRS and rOSATS scores significantly (both P < 0.001); however, the GRS overall pass rate was higher in the simulation group compared with the control group (89% vs 44%, P = 0.066). Standard robotic orientation and/or robotic virtual reality simulation improve surgical skills on an inanimate model, although this may be a function of the initial "practice" on the inanimate model and repeat testing of a known task. However, robotic virtual reality simulation training increases GRS pass rates consistent with improved robotic technical skills learned in a virtual reality environment.

Orientation of airborne laser scanning point clouds with multi-view, multi-scale image blocks.

PubMed

Rönnholm, Petri; Hyyppä, Hannu; Hyyppä, Juha; Haggrén, Henrik

2009-01-01

Comprehensive 3D modeling of our environment requires integration of terrestrial and airborne data, which is collected, preferably, using laser scanning and photogrammetric methods. However, integration of these multi-source data requires accurate relative orientations. In this article, two methods for solving relative orientation problems are presented. The first method includes registration by minimizing the distances between of an airborne laser point cloud and a 3D model. The 3D model was derived from photogrammetric measurements and terrestrial laser scanning points. The first method was used as a reference and for validation. Having completed registration in the object space, the relative orientation between images and laser point cloud is known. The second method utilizes an interactive orientation method between a multi-scale image block and a laser point cloud. The multi-scale image block includes both aerial and terrestrial images. Experiments with the multi-scale image block revealed that the accuracy of a relative orientation increased when more images were included in the block. The orientations of the first and second methods were compared. The comparison showed that correct rotations were the most difficult to detect accurately by using the interactive method. Because the interactive method forces laser scanning data to fit with the images, inaccurate rotations cause corresponding shifts to image positions. However, in a test case, in which the orientation differences included only shifts, the interactive method could solve the relative orientation of an aerial image and airborne laser scanning data repeatedly within a couple of centimeters.

Orientation of Airborne Laser Scanning Point Clouds with Multi-View, Multi-Scale Image Blocks

PubMed Central

Rönnholm, Petri; Hyyppä, Hannu; Hyyppä, Juha; Haggrén, Henrik

2009-01-01

Comprehensive 3D modeling of our environment requires integration of terrestrial and airborne data, which is collected, preferably, using laser scanning and photogrammetric methods. However, integration of these multi-source data requires accurate relative orientations. In this article, two methods for solving relative orientation problems are presented. The first method includes registration by minimizing the distances between of an airborne laser point cloud and a 3D model. The 3D model was derived from photogrammetric measurements and terrestrial laser scanning points. The first method was used as a reference and for validation. Having completed registration in the object space, the relative orientation between images and laser point cloud is known. The second method utilizes an interactive orientation method between a multi-scale image block and a laser point cloud. The multi-scale image block includes both aerial and terrestrial images. Experiments with the multi-scale image block revealed that the accuracy of a relative orientation increased when more images were included in the block. The orientations of the first and second methods were compared. The comparison showed that correct rotations were the most difficult to detect accurately by using the interactive method. Because the interactive method forces laser scanning data to fit with the images, inaccurate rotations cause corresponding shifts to image positions. However, in a test case, in which the orientation differences included only shifts, the interactive method could solve the relative orientation of an aerial image and airborne laser scanning data repeatedly within a couple of centimeters. PMID:22454569

Action-Oriented Research: Models and Methods.

ERIC Educational Resources Information Center

Small, Stephen A.

1995-01-01

Four models of action-oriented research, a research approach that can inform policy and practice, are described: action, participatory, empowerment, and feminism research. Discusses historical roots, epistemological assumptions, agendas, and methodological strategies of each, and presents implications for family researchers. (JPS)

Numerical prediction of fiber orientation in injection-molded short-fiber/thermoplastic composite parts with experimental validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thi, Thanh Binh Nguyen; Morioka, Mizuki; Yokoyama, Atsushi

Numerical prediction of the fiber orientation in the short-glass fiber (GF) reinforced polyamide 6 (PA6) composites with the fiber weight concentration of 30%, 50%, and 70% manufactured by the injection molding process is presented. And the fiber orientation was also directly observed and measured through X-ray computed tomography. During the injection molding process of the short-fiber/thermoplastic composite, the fiber orientation is produced by the flow states and the fiber-fiber interaction. Folgar and Tucker equation is the well known for modeling the fiber orientation in a concentrated suspension. They included into Jeffrey’s equation a diffusive type of term by introducing amore » phenomenological coefficient to account for the fiber-fiber interaction. Our developed model for the fiber-fiber interaction was proposed by modifying the rotary diffusion term of the Folgar-Tucker equation. This model was presented in a conference paper of the 29{sup th} International Conference of the Polymer Processing Society published by AIP conference proceeding. For modeling fiber interaction, the fiber dynamic simulation was introduced in order to obtain a global fiber interaction coefficient, which is sum function of the fiber concentration, aspect ratio, and angular velocity. The fiber orientation is predicted by using the proposed fiber interaction model incorporated into a computer aided engineering simulation package C-Mold. An experimental program has been carried out in which the fiber orientation distribution has been measured in 100 x 100 x 2 mm injection-molded plate and 100 x 80 x 2 mm injection-molded weld by analyzed with a high resolution 3D X-ray computed tomography system XVA-160α, and calculated by X-ray computed tomography imaging. The numerical prediction shows a good agreement with experimental validation. And the complex fiber orientation in the injection-molded weld was investigated.« less

Numerical prediction of fiber orientation in injection-molded short-fiber/thermoplastic composite parts with experimental validation

NASA Astrophysics Data System (ADS)

Thi, Thanh Binh Nguyen; Morioka, Mizuki; Yokoyama, Atsushi; Hamanaka, Senji; Yamashita, Katsuhisa; Nonomura, Chisato

2015-05-01

Numerical prediction of the fiber orientation in the short-glass fiber (GF) reinforced polyamide 6 (PA6) composites with the fiber weight concentration of 30%, 50%, and 70% manufactured by the injection molding process is presented. And the fiber orientation was also directly observed and measured through X-ray computed tomography. During the injection molding process of the short-fiber/thermoplastic composite, the fiber orientation is produced by the flow states and the fiber-fiber interaction. Folgar and Tucker equation is the well known for modeling the fiber orientation in a concentrated suspension. They included into Jeffrey's equation a diffusive type of term by introducing a phenomenological coefficient to account for the fiber-fiber interaction. Our developed model for the fiber-fiber interaction was proposed by modifying the rotary diffusion term of the Folgar-Tucker equation. This model was presented in a conference paper of the 29th International Conference of the Polymer Processing Society published by AIP conference proceeding. For modeling fiber interaction, the fiber dynamic simulation was introduced in order to obtain a global fiber interaction coefficient, which is sum function of the fiber concentration, aspect ratio, and angular velocity. The fiber orientation is predicted by using the proposed fiber interaction model incorporated into a computer aided engineering simulation package C-Mold. An experimental program has been carried out in which the fiber orientation distribution has been measured in 100 x 100 x 2 mm injection-molded plate and 100 x 80 x 2 mm injection-molded weld by analyzed with a high resolution 3D X-ray computed tomography system XVA-160α, and calculated by X-ray computed tomography imaging. The numerical prediction shows a good agreement with experimental validation. And the complex fiber orientation in the injection-molded weld was investigated.

Predictors of Online Cancer Prevention Information Seeking Among Patients and Caregivers Across the Digital Divide: A Cross-Sectional, Correlational Study.

PubMed

Ginossar, Tamar

2016-03-09

The digital divide is a recognized public health problem caused by social determinants that exacerbate health disparities. Despite the "tectonic shift" in how most of the public obtains cancer information, underserved communities are at increased risk of being digitally marginalized. However, research that examines factors underlying eHealth information seeking in diverse health contexts is lacking. The aim of this paper is to explore preferences and use of eHealth cancer prevention information (CPI) among patients and caregivers attending a minority-serving oncology clinic using the comprehensive model of information seeking as a theoretical framework. Specifically, the study examined the role of social determinants and prevention orientation in differences in preference and use of the Internet for CPI seeking among this diverse sample. Survey methodology was used to identify social determinants and behavioral factors, including prevention orientation as correlates and predictors of respondents' (n=252) preferences and use of eHealth for CPI seeking. Less than half (112/252, 44.4%) of respondents said that if faced with the need to seek CPI, they would seek this information online. In the final logistic regression model, education, ethnicity, age, and prevention orientation made significant contributions to the model (P<.05). Specifically, for each year increase in age, participants were 3% less likely to use the Internet for CPI seeking (P=.011). Compared to college graduates, respondents who did not complete high school were 11.75 times less likely to cite the Internet as a CPI carrier (P<.001) and those with a high school education were 3 times (2.99, P=.015) less likely. In addition, the odds that a Spanish speaker would cite the Internet as a CPI carrier were one-fifth (22%) of non-Hispanic whites (P=.032) and about one-quarter (26%) of English-speaking Latinos (P=.036). Finally, with each one point increase on the prevention orientation scale, respondents were 1.83 times less likely to cite online CPI seeking (P=.05). Social determinants to health have profound influence on eHealth CPI seeking. Providers and policy makers should focus on meeting patients and family members' CPI needs following diagnosis and increase eHealth accessibility and availability of evidence-based CPI to diverse populations. Future research is needed to unravel further differences in eHealth CPI seeking, including those among Native Americans that emerged as an additional digitally underserved racial/ethnic group. Finally, additional factors underlying these differences should be explored to better tailor CPI eHealth information to diverse communities' information needs. ©Tamar Ginossar. Originally published in JMIR Cancer (http://cancer.jmir.org), 09.03.2016.

Virtual and flexible digital signal processing system based on software PnP and component works

NASA Astrophysics Data System (ADS)

He, Tao; Wu, Qinghua; Zhong, Fei; Li, Wei

2005-05-01

An idea about software PnP (Plug & Play) is put forward according to the hardware PnP. And base on this idea, a virtual flexible digital signal processing system (FVDSPS) is carried out. FVDSPS is composed of a main control center, many sub-function modules and other hardware I/O modules. Main control center sends out commands to sub-function modules, and manages running orders, parameters and results of sub-functions. The software kernel of FVDSPS is DSP (Digital Signal Processing) module, which communicates with the main control center through some protocols, accept commands or send requirements. The data sharing and exchanging between the main control center and the DSP modules are carried out and managed by the files system of the Windows Operation System through the effective communication. FVDSPS real orients objects, orients engineers and orients engineering problems. With FVDSPS, users can freely plug and play, and fast reconfigure a signal process system according to engineering problems without programming. What you see is what you get. Thus, an engineer can orient engineering problems directly, pay more attention to engineering problems, and promote the flexibility, reliability and veracity of testing system. Because FVDSPS orients TCP/IP protocol, through Internet, testing engineers, technology experts can be connected freely without space. Engineering problems can be resolved fast and effectively. FVDSPS can be used in many fields such as instruments and meter, fault diagnosis, device maintenance and quality control.

Neonatal care of infants with cleft lip and/or palate: feeding orientation and evolution of weight gain in a nonspecialized Brazilian hospital.

PubMed

Amstalden-Mendes, Lívia Gobby; Magna, Luis Alberto; Gil-da-Silva-Lopes, Vera Lúcia

2007-05-01

To survey the feeding orientation received during the postnatal period by the parents of cleft babies, as well as the location where they receive the orientation; to identify resources used in feeding; and to assess the correlation of the child's weight with the surgical procedure schedule. During consultation for diagnosis and genetic counseling in a general tertiary hospital, 26 parents of cleft babies born in different hospitals were interviewed based on a semistructured protocol and spontaneous reports. Cleft palate was present in 42.31% (11/26), cleft lip/palate in 50% (13/26), and cleft lip in 7.69% (2/26) of the cases. Feeding orientation was given in maternities to 72% (18/25) and in specific rehabilitation centers to 24% (6/ 25) of the parents. Breast-feeding was encouraged in every case. Nevertheless, other feeding resources were necessary, especially bottles. Surgical procedure delays caused by poor weight gain occurred in 66.7% (12/18). Neonatal feeding orientation was not systematically given in every case. Because it is an important way to achieve an effective weight gain, educational programs for nonspecialized health professionals, as well as regular pediatric follow-up and specialized multi-professional teams, could improve nutritional intake and could move the schedule for surgical procedures forward. The results also suggest that specific neonatal health care for cleft babies should be part of health policy.

Evaluating a Practice-Oriented Service Model to Increase the Use of Respite Services among Minorities and Rural Caregivers

ERIC Educational Resources Information Center

Montoro-Rodriguez, Julian; Kosloski, Karl; Montgomery, Rhonda J. V.

2003-01-01

Purpose: The goal of this study was to evaluate the practice-oriented model of service use (Yeatts, Crow, & Folts, 1992) relative to the more widely used behavioral model (Andersen, 1968) in its ability to explain the use of respite services by caregivers of Alzheimer's patients. Unlike the behavioral model, which focuses primarily on…

A New Unified Analysis of Estimate Errors by Model-Matching Phase-Estimation Methods for Sensorless Drive of Permanent-Magnet Synchronous Motors and New Trajectory-Oriented Vector Control, Part I

NASA Astrophysics Data System (ADS)

Shinnaka, Shinji; Sano, Kousuke

This paper presents a new unified analysis of estimate errors by model-matching phase-estimation methods such as rotor-flux state-observers, back EMF state-observers, and back EMF disturbance-observers, for sensorless drive of permanent-magnet synchronous motors. Analytical solutions about estimate errors, whose validity is confirmed by numerical experiments, are rich in universality and applicability. As an example of universality and applicability, a new trajectory-oriented vector control method is proposed, which can realize directly quasi-optimal strategy minimizing total losses with no additional computational loads by simply orienting one of vector-control coordinates to the associated quasi-optimal trajectory. The coordinate orientation rule, which is analytically derived, is surprisingly simple. Consequently the trajectory-oriented vector control method can be applied to a number of conventional vector control systems using one of the model-matching phase-estimation methods.

Orientation-dependent integral equation theory for a two-dimensional model of water

NASA Astrophysics Data System (ADS)

Urbič, T.; Vlachy, V.; Kalyuzhnyi, Yu. V.; Dill, K. A.

2003-03-01

We develop an integral equation theory that applies to strongly associating orientation-dependent liquids, such as water. In an earlier treatment, we developed a Wertheim integral equation theory (IET) that we tested against NPT Monte Carlo simulations of the two-dimensional Mercedes Benz model of water. The main approximation in the earlier calculation was an orientational averaging in the multidensity Ornstein-Zernike equation. Here we improve the theory by explicit introduction of an orientation dependence in the IET, based upon expanding the two-particle angular correlation function in orthogonal basis functions. We find that the new orientation-dependent IET (ODIET) yields a considerable improvement of the predicted structure of water, when compared to the Monte Carlo simulations. In particular, ODIET predicts more long-range order than the original IET, with hexagonal symmetry, as expected for the hydrogen bonded ice in this model. The new theoretical approximation still errs in some subtle properties; for example, it does not predict liquid water's density maximum with temperature or the negative thermal expansion coefficient.

Object-oriented design and programming in medical decision support.

PubMed

Heathfield, H; Armstrong, J; Kirkham, N

1991-12-01

The concept of object-oriented design and programming has recently received a great deal of attention from the software engineering community. This paper highlights the realisable benefits of using the object-oriented approach in the design and development of clinical decision support systems. These systems seek to build a computational model of some problem domain and therefore tend to be exploratory in nature. Conventional procedural design techniques do not support either the process of model building or rapid prototyping. The central concepts of the object-oriented paradigm are introduced, namely encapsulation, inheritance and polymorphism, and their use illustrated in a case study, taken from the domain of breast histopathology. In particular, the dual roles of inheritance in object-oriented programming are examined, i.e., inheritance as a conceptual modelling tool and inheritance as a code reuse mechanism. It is argued that the use of the former is not entirely intuitive and may be difficult to incorporate into the design process. However, inheritance as a means of optimising code reuse offers substantial technical benefits.

Beyond Authoritarian Personality: The Culture-Inclusive Theory of Chinese Authoritarian Orientation.

PubMed

Chien, Chin-Lung

2016-01-01

In a dyad interaction, respecting and obeying those with high status (authority) is highly valued in Chinese societies. Regarding explicit behaviors, Chinese people usually show respect to and obey authority, which we call authoritarian orientation. Previous literature has indicated that Chinese people have a high degree of authoritarian personality, which was considered a national character. However, under Confucian relationalism (Hwang, 2012a), authoritarian orientation is basically an ethical issue, and thus, should not be reduced to the contention of authoritarian personality. Based on Yang's (1993) indigenous conceptualization, Chien (2013) took an emic bottom-up approach to construct an indigenous model of Chinese authoritarian orientation; it represents a "culture-inclusive theory." However, Chien's model lacks the role of agency or intentionality. To resolve this issue and to achieve the epistemological goal of indigenous psychology (that is, "one mind, many mentalities"), this paper took the "cultural system approach" (Hwang, 2015b) to construct a culture-inclusive theory of authoritarian orientation in order to represent the universal mind of human beings as well as the mentalities of people in a particular culture. Two theories that reflect the universal mind, the "Face and Favor model" (Hwang, 1987) and the "Mandala Model of Self" (Hwang, 2011a,c), were used as analytical frameworks for interpreting Chien's original model. The process of constructing the culture-inclusive theory of authoritarian orientation may represent a paradigm for the construction of indigenous culture-inclusive theories while inspiring further development. Some future research directions are proposed herein.

Observation-Oriented Modeling: Going beyond "Is It All a Matter of Chance"?

ERIC Educational Resources Information Center

Grice, James W.; Yepez, Maria; Wilson, Nicole L.; Shoda, Yuichi

2017-01-01

An alternative to null hypothesis significance testing is presented and discussed. This approach, referred to as observation-oriented modeling, is centered on model building in an effort to explicate the structures and processes believed to generate a set of observations. In terms of analysis, this novel approach complements traditional methods…

Learning Goal Orientation, Formal Mentoring, and Leadership Competence in HRD: A Conceptual Model

ERIC Educational Resources Information Center

Kim, Sooyoung

2007-01-01

Purpose: The purpose of this paper is to suggest a conceptual model of formal mentoring as a leadership development initiative including "learning goal orientation", "mentoring functions", and "leadership competencies" as key constructs of the model. Design/methodology/approach: Some empirical studies, though there are not many, will provide…

A Theoretical Model of Children's Storytelling Using Physically-Oriented Technologies (SPOT)

ERIC Educational Resources Information Center

Guha, Mona Leigh; Druin, Allison; Montemayor, Jaime; Chipman, Gene; Farber, Allison

2007-01-01

This paper develops a model of children's storytelling using Physically-Oriented Technology (SPOT). The SPOT model draws upon literature regarding current physical storytelling technologies and was developed using a grounded theory approach to qualitative research. This empirical work focused on the experiences of 18 children, ages 5-6, who worked…

Models of Sexual and Relational Orientation: A Critical Review and Synthesis

ERIC Educational Resources Information Center

Moe, Jeffry L.; Reicherzer, Stacee; Dupuy, Paula J.

2011-01-01

Many frameworks exist to explain and describe the phenomenon of same-sex sexuality as it applies to human development. This conceptual article provides a critical overview and synthesis of previous models to serve as a theoretical bridge for the suggested multiple continua model of sexual and relational orientations. Recommendations for how…

Comment on “Models of stochastic, spatially varying stress in the crust compatible with focal‐mechanism data, and how stress inversions can be biased toward the stress rate” by Deborah Elaine Smith and Thomas H. Heaton

USGS Publications Warehouse

Hardebeck, Jeanne L.

2015-01-01

This model makes specific predictions about the orientations and heterogeneity of earthquake focal mechanisms. Smith and Heaton (2011) attempt to validate this heterogeneous stress model using observations of earthquake focal‐mechanism variability from Hardebeck (2006). They then demonstrate that the model predicts a bias in the orientations of earthquake focal mechanisms, which are biased away from the background stress and toward the stressing rate. They suggest the focal‐mechanism bias in this model invalidates the large body of work over the last several decades, that has inferred stress orientations from the inversion of earthquake focal mechanisms. The question of whether or not the Smith and Heaton (2011) model is applicable to the real Earth is therefore important not only for understanding spatial stress variability but also for evaluating the numerous studies that have inferred crustal stress orientations from earthquake focal mechanisms (e.g., as compiled by Heidbach et al., 2008).

Hybrid Orientation Based Human Limbs Motion Tracking Method

PubMed Central

Glonek, Grzegorz; Wojciechowski, Adam

2017-01-01

One of the key technologies that lays behind the human–machine interaction and human motion diagnosis is the limbs motion tracking. To make the limbs tracking efficient, it must be able to estimate a precise and unambiguous position of each tracked human joint and resulting body part pose. In recent years, body pose estimation became very popular and broadly available for home users because of easy access to cheap tracking devices. Their robustness can be improved by different tracking modes data fusion. The paper defines the novel approach—orientation based data fusion—instead of dominating in literature position based approach, for two classes of tracking devices: depth sensors (i.e., Microsoft Kinect) and inertial measurement units (IMU). The detailed analysis of their working characteristics allowed to elaborate a new method that let fuse more precisely limbs orientation data from both devices and compensates their imprecisions. The paper presents the series of performed experiments that verified the method’s accuracy. This novel approach allowed to outperform the precision of position-based joints tracking, the methods dominating in the literature, of up to 18%. PMID:29232832

Focusing and alignment of erythrocytes in a viscoelastic medium

NASA Astrophysics Data System (ADS)

Go, Taesik; Byeon, Hyeokjun; Lee, Sang Joon

2017-01-01

Viscoelastic fluid flow-induced cross-streamline migration has recently received considerable attention because this process provides simple focusing and alignment over a wide range of flow rates. The lateral migration of particles depends on the channel geometry and physicochemical properties of particles. In this study, digital in-line holographic microscopy (DIHM) is employed to investigate the lateral migration of human erythrocytes induced by viscoelastic fluid flow in a rectangular microchannel. DIHM provides 3D spatial distributions of particles and information on particle orientation in the microchannel. The elastic forces generated in the pressure-driven flows of a viscoelastic fluid push suspended particles away from the walls and enforce erythrocytes to have a fixed orientation. Blood cell deformability influences the lateral focusing and fixed orientation in the microchannel. Different from rigid spheres and hardened erythrocytes, deformable normal erythrocytes disperse from the channel center plane, as the flow rate increases. Furthermore, normal erythrocytes have a higher angle of inclination than hardened erythrocytes in the region near the side-walls of the channel. These results may guide the label-free diagnosis of hematological diseases caused by abnormal erythrocyte deformability.

An assembly process model based on object-oriented hierarchical time Petri Nets

NASA Astrophysics Data System (ADS)

Wang, Jiapeng; Liu, Shaoli; Liu, Jianhua; Du, Zenghui

2017-04-01

In order to improve the versatility, accuracy and integrity of the assembly process model of complex products, an assembly process model based on object-oriented hierarchical time Petri Nets is presented. A complete assembly process information model including assembly resources, assembly inspection, time, structure and flexible parts is established, and this model describes the static and dynamic data involved in the assembly process. Through the analysis of three-dimensional assembly process information, the assembly information is hierarchically divided from the whole, the local to the details and the subnet model of different levels of object-oriented Petri Nets is established. The communication problem between Petri subnets is solved by using message database, and it reduces the complexity of system modeling effectively. Finally, the modeling process is presented, and a five layer Petri Nets model is established based on the hoisting process of the engine compartment of a wheeled armored vehicle.

Computational modeling and analysis for left ventricle motion using CT/Echo image fusion

NASA Astrophysics Data System (ADS)

Kim, Ji-Yeon; Kang, Nahyup; Lee, Hyoung-Euk; Kim, James D. K.

2014-03-01

In order to diagnose heart disease such as myocardial infarction, 2D strain through the speckle tracking echocardiography (STE) or the tagged MRI is often used. However out-of-plane strain measurement using STE or tagged MRI is inaccurate. Therefore, strain for whole organ which are analyzed by simulation of 3D cardiac model can be applied in clinical diagnosis. To simulate cardiac contraction in a cycle, cardiac physical properties should be reflected in cardiac model. The myocardial wall in left ventricle is represented as a transversely orthotropic hyperelastic material, with the fiber orientation varying sequentially from the epicardial surface, through about 0° at the midwall, to the endocardial surface. A time-varying elastance model is simulated to contract myocardial fiber, and physiological intraventricular systolic pressure curves are employed for the cardiac dynamics simulation in a cycle. And an exact description of the cardiac motion should be acquired in order that essential boundary conditions for cardiac simulation are obtained effectively. Real time cardiac motion can be acquired by using echocardiography and exact cardiac geometrical 3D model can be reconstructed using 3D CT data. In this research, image fusion technology from CT and echocardiography is employed in order to consider patient-specific left ventricle movement. Finally, longitudinal strain from speckle tracking echocardiography which is known to fit actual left ventricle deformation relatively well is used to verify these results.

Right Lower Quadrant Pain in a Young Female: Ultrasound Diagnosis of Rectus Abdominis Tear.

PubMed

Minardi, Joseph; Shaver, Erica; Monseau, Aaron; Pratt, Adam; Layman, Shelley M

2015-11-01

Right lower quadrant pain in young females presents a frequent diagnostic challenge for emergency physicians, with a broad differential and several important diagnoses. Using an "ultrasound first" imaging strategy can help decrease the use of computed tomography scans, with associated savings in radiation exposure, cost, and other resource use. We report a case of right lower quadrant pain in a young woman. After her initial history and physical examination, appendicitis was the leading differential. A bedside ultrasound was performed, leading to the uncommon diagnosis of rectus abdominis muscle tear. The sonographic findings of a muscle tear include increase in size, loss of linear, homogeneous architecture, and decreased echogenicity. Making this diagnosis at the bedside using ultrasound obviated the need for further imaging, avoiding unnecessary radiation exposure, and decreasing emergency department length of stay and overall cost, while leading to a tailored treatment plan. Why Should an Emergency Physician Be Aware of This? Rectus abdominis tear is a cause of right lower quadrant pain that may mimic appendicitis and should be considered in patients with this complaint. The ability to make this diagnosis with bedside ultrasound may assist in several important patient-oriented outcomes. Copyright © 2015 Elsevier Inc. All rights reserved.

Navigation-supported diagnosis of the substantia nigra by matching midbrain sonography and MRI

NASA Astrophysics Data System (ADS)

Salah, Zein; Weise, David; Preim, Bernhard; Classen, Joseph; Rose, Georg

2012-03-01

Transcranial sonography (TCS) is a well-established neuroimaging technique that allows for visualizing several brainstem structures, including the substantia nigra, and helps for the diagnosis and differential diagnosis of various movement disorders, especially in Parkinsonian syndromes. However, proximate brainstem anatomy can hardly be recognized due to the limited image quality of B-scans. In this paper, a visualization system for the diagnosis of the substantia nigra is presented, which utilizes neuronavigated TCS to reconstruct tomographical slices from registered MRI datasets and visualizes them simultaneously with corresponding TCS planes in realtime. To generate MRI tomographical slices, the tracking data of the calibrated ultrasound probe are passed to an optimized slicing algorithm, which computes cross sections at arbitrary positions and orientations from the registered MRI dataset. The extracted MRI cross sections are finally fused with the region of interest from the ultrasound image. The system allows for the computation and visualization of slices at a near real-time rate. Primary tests of the system show an added value to the pure sonographic imaging. The system also allows for reconstructing volumetric (3D) ultrasonic data of the region of interest, and thus contributes to enhancing the diagnostic yield of midbrain sonography.

Volumetric image classification using homogeneous decomposition and dictionary learning: A study using retinal optical coherence tomography for detecting age-related macular degeneration.

PubMed

Albarrak, Abdulrahman; Coenen, Frans; Zheng, Yalin

2017-01-01

Three-dimensional (3D) (volumetric) diagnostic imaging techniques are indispensable with respect to the diagnosis and management of many medical conditions. However there is a lack of automated diagnosis techniques to facilitate such 3D image analysis (although some support tools do exist). This paper proposes a novel framework for volumetric medical image classification founded on homogeneous decomposition and dictionary learning. In the proposed framework each image (volume) is recursively decomposed until homogeneous regions are arrived at. Each region is represented using a Histogram of Oriented Gradients (HOG) which is transformed into a set of feature vectors. The Gaussian Mixture Model (GMM) is then used to generate a "dictionary" and the Improved Fisher Kernel (IFK) approach is used to encode feature vectors so as to generate a single feature vector for each volume, which can then be fed into a classifier generator. The principal advantage offered by the framework is that it does not require the detection (segmentation) of specific objects within the input data. The nature of the framework is fully described. A wide range of experiments was conducted with which to analyse the operation of the proposed framework and these are also reported fully in the paper. Although the proposed approach is generally applicable to 3D volumetric images, the focus for the work is 3D retinal Optical Coherence Tomography (OCT) images in the context of the diagnosis of Age-related Macular Degeneration (AMD). The results indicate that excellent diagnostic predictions can be produced using the proposed framework. Copyright © 2016 Elsevier Ltd. All rights reserved.

Weight fluctuation during adulthood and weight gain since breast cancer diagnosis predict multiple dimensions of body image among rural breast cancer survivors.

PubMed

Fazzino, Tera L; Hunter, Rebecca Clausius; Sporn, Nora; Christifano, Danielle N; Befort, Christie A

2017-03-01

Obesity and weight gain after breast cancer treatment are common among survivors, yet the relationship between weight and body image has received little attention. The purpose of the current study was to examine the relationship between current body mass index, weight gain since diagnosis, and largest weight fluctuation in adulthood with six dimensions of body image among overweight/obese breast cancer survivors. The current study used data obtained from a weight control trial with 210 rural overweight/obese breast cancer survivors. Using data collected at baseline, multiple regression models were constructed to examine the relative association of the three weight variables with breast cancer-specific dimensions of body image while controlling for demographic characteristics and cancer treatment-related variables. Largest weight fluctuation in adulthood significantly predicted overall body image (p = 0.01) and was associated with the three socially oriented dimensions of body image: social activity restriction, embarrassment about appearance, and sexuality (all ps = 0.01). Weight gain since diagnosis approached statistical significance in predicting overall body image (p = 0.05) and was associated with embarrassment about appearance (p = 0.03). Current body mass index was not significantly associated with overall body image when controlling for the other weight variables (p = 0.07) and was negatively associated with social activity restriction (p = 0.01) and sexuality (p = 0.01). Obese breast cancer survivors with a history of a large weight fluctuation in adulthood may be prone to poorer breast cancer-specific body image several years after treatment. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Problems and Limitations of Satellite Image Orientation for Determination of Height Models

NASA Astrophysics Data System (ADS)

Jacobsen, K.

2017-05-01

The usual satellite image orientation is based on bias corrected rational polynomial coefficients (RPC). The RPC are describing the direct sensor orientation of the satellite images. The locations of the projection centres today are without problems, but an accuracy limit is caused by the attitudes. Very high resolution satellites today are very agile, able to change the pointed area over 200km within 10 to 11 seconds. The corresponding fast attitude acceleration of the satellite may cause a jitter which cannot be expressed by the third order RPC, even if it is recorded by the gyros. Only a correction of the image geometry may help, but usually this will not be done. The first indication of jitter problems is shown by systematic errors of the y-parallaxes (py) for the intersection of corresponding points during the computation of ground coordinates. These y-parallaxes have a limited influence to the ground coordinates, but similar problems can be expected for the x-parallaxes, determining directly the object height. Systematic y-parallaxes are shown for Ziyuan-3 (ZY3), WorldView-2 (WV2), Pleiades, Cartosat-1, IKONOS and GeoEye. Some of them have clear jitter effects. In addition linear trends of py can be seen. Linear trends in py and tilts in of computed height models may be caused by limited accuracy of the attitude registration, but also by bias correction with affinity transformation. The bias correction is based on ground control points (GCPs). The accuracy of the GCPs usually does not cause some limitations but the identification of the GCPs in the images may be difficult. With 2-dimensional bias corrected RPC-orientation by affinity transformation tilts of the generated height models may be caused, but due to large affine image deformations some satellites, as Cartosat-1, have to be handled with bias correction by affinity transformation. Instead of a 2-dimensional RPC-orientation also a 3-dimensional orientation is possible, respecting the object height more as by 2-dimensional orientation. The 3-dimensional orientation showed advantages for orientation based on a limited number of GCPs, but in case of poor GCP distribution it may cause also negative effects. For some of the used satellites the bias correction by affinity transformation showed advantages, but for some other the bias correction by shift was leading to a better levelling of the generated height models, even if the root mean square (RMS) differences at the GCPs were larger as for bias correction by affinity transformation. The generated height models can be analyzed and corrected with reference height models. For the used data sets accurate reference height models are available, but an analysis and correction with the free of charge available SRTM digital surface model (DSM) or ALOS World 3D (AW3D30) is also possible and leads to similar results. The comparison of the generated height models with the reference DSM shows some height undulations, but the major accuracy influence is caused by tilts of the height models. Some height model undulations reach up to 50 % of the ground sampling distance (GSD), this is not negligible but it cannot be seen not so much at the standard deviations of the height. In any case an improvement of the generated height models is possible with reference height models. If such corrections are applied it compensates possible negative effects of the type of bias correction or 2-dimensional orientations against 3-dimensional handling.

Three-dimensional analysis of dislocation multiplication during thermal process of grown silicon with different orientations

NASA Astrophysics Data System (ADS)

Gao, B.; Nakano, S.; Harada, H.; Miyamura, Y.; Kakimoto, K.

2017-09-01

We used an advanced 3D model to study the effect of crystal orientation on the dislocation multiplication in single-crystal silicon under accurate control of the cooling history of temperature. The incorporation of the anisotropy effect of the crystal lattice into the model has been explained in detail, and an algorithm for accurate control of the temperature in the furnace has also been presented. This solver can dynamically track the history of dislocation generation for different orientations during thermal processing of single-crystal silicon. Four orientations, [001], [110], [111], and [112], have been examined, and the comparison of dislocation distributions has been provided.

Occupational dreams, choices and aspirations: adolescents' entrepreneurial prospects and orientations.

PubMed

Schmitt-Rodermund, Eva; Vondracek, Fred W

2002-02-01

The present study examined possible early antecedents of entrepreneurship of 14-17-year-old 10th grade students (n=320). We hypothesized that Entrepreneurial Orientation (interest and self-efficacy), together with Willingness to Expend Effort, would be an important predictor of an adolescent's Entrepreneurial Prospects, i.e. prospects of becoming self-employed in the future. Furthermore, personality and the model of self-employed family were expected to predict the level of Entrepreneurial Orientation. The same relationships were investigated separately for students who were more or less willing to expend effort. Among students more willing to expend effort, levels of Entrepreneurial Orientation were higher for those who were conscientious, self-efficient, open to new experiences, and low in agreeableness. Among students less willing to expend effort, a high need for social recognition predicted higher levels of Entrepreneurial Orientation. In addition, parents' model for them was connected with lower levels of Entrepreneurial Orientation. A moderating effect of Willingness to Expend Effort was supported by the results for parents' model and need for social recognition. Copyright 2002 Published by Elsevier Science Ltd on behalf of The Association for Professionals in Services for Adolescents.

A Crystal Plasticity Model of Fatigue of Dissimilar Magnesium Alloy Bi-Crystals

NASA Astrophysics Data System (ADS)

Knight, Simon

A crystal plasticity finite element (CPFE) model was applied to the fatigue deformation of dissimilar Mg alloy bi-crystals. The mesoscopic stress-strain and microscopic slip and twinning behaviour of the model were first validated with experimental tension and compression data of pure Mg single crystals. High-cycle fatigue (HCF) simulations up to 1000 cycles were then used to systematically examine the effect of different textures on the cyclic deformation behavior of Mg AZ31-AZ80 bi-crystals at room-temperature. Fatigue behaviour was characterized in terms of the mesoscopic average stress-strain response and the evolution of the microscopic deformation (slip/twin activity). The model captures load asymmetry, cyclic hardening/softening and ratcheting. However, the model did not capture stress concentrations at the grain boundary (GB) for the grain shapes considered. Either basal slip or tensile twinning was activated for any given orientation. When the soft AZ31 grain is oriented for basal slip almost all the shear strain is contained in that grain and has approximately ten times more accumulated shear strain than the other orientations. The results reveal there is a strong effect from orientation combinations on the cyclic deformation wherein a "hard" orientation shields a "soft" orientation from strain. When the AZ80 grain is oriented for basal slip and the AZ31 grain is oriented for tensile twinning the bi-crystal is soft, but only in one direction since twinning is a polar mechanism. Approximately half as much accumulated shear strain occurs when both grains are oriented for twinning. The slip and twinning systems quickly harden in AZ31 in the first few hundred cycles and the shear strain amplitudes quickly devolve from values between 10-6 - 10-4 to around 10-7; values which would be difficult to resolve experimentally. The results were then extended to the possible effects on the fatigue behaviour of an AZ31-AZ80 dissimilar weld idealized as an AZ31-AZ80 bi-crystal. It is predicted that the worst fatigue behaviour would occur when one grain is oriented for basal slip: AZ31 grain, results in strain localization; AZ80 grain, results in an increase in twin boundaries and irreversible deformation in an AZ31 grain.

The Winds of Change: Thomas Kuhn and the Revolution in the Teaching of Writing.

ERIC Educational Resources Information Center

Hairston, Maxine

1982-01-01

Uses Thomas Kuhn's hypothesis on paradigm shifts--changes in a discipline from established models to newer ones--to examine the developing shift in writing instruction from the product-oriented to the process-oriented model. (RL)

Towards aspect-oriented functional--structural plant modelling.

PubMed

Cieslak, Mikolaj; Seleznyova, Alla N; Prusinkiewicz, Przemyslaw; Hanan, Jim

2011-10-01

Functional-structural plant models (FSPMs) are used to integrate knowledge and test hypotheses of plant behaviour, and to aid in the development of decision support systems. A significant amount of effort is being put into providing a sound methodology for building them. Standard techniques, such as procedural or object-oriented programming, are not suited for clearly separating aspects of plant function that criss-cross between different components of plant structure, which makes it difficult to reuse and share their implementations. The aim of this paper is to present an aspect-oriented programming approach that helps to overcome this difficulty. The L-system-based plant modelling language L+C was used to develop an aspect-oriented approach to plant modelling based on multi-modules. Each element of the plant structure was represented by a sequence of L-system modules (rather than a single module), with each module representing an aspect of the element's function. Separate sets of productions were used for modelling each aspect, with context-sensitive rules facilitated by local lists of modules to consider/ignore. Aspect weaving or communication between aspects was made possible through the use of pseudo-L-systems, where the strict-predecessor of a production rule was specified as a multi-module. The new approach was used to integrate previously modelled aspects of carbon dynamics, apical dominance and biomechanics with a model of a developing kiwifruit shoot. These aspects were specified independently and their implementation was based on source code provided by the original authors without major changes. This new aspect-oriented approach to plant modelling is well suited for studying complex phenomena in plant science, because it can be used to integrate separate models of individual aspects of plant development and function, both previously constructed and new, into clearly organized, comprehensive FSPMs. In a future work, this approach could be further extended into an aspect-oriented programming language for FSPMs.

Towards aspect-oriented functional–structural plant modelling

PubMed Central

Cieslak, Mikolaj; Seleznyova, Alla N.; Prusinkiewicz, Przemyslaw; Hanan, Jim

2011-01-01

Background and Aims Functional–structural plant models (FSPMs) are used to integrate knowledge and test hypotheses of plant behaviour, and to aid in the development of decision support systems. A significant amount of effort is being put into providing a sound methodology for building them. Standard techniques, such as procedural or object-oriented programming, are not suited for clearly separating aspects of plant function that criss-cross between different components of plant structure, which makes it difficult to reuse and share their implementations. The aim of this paper is to present an aspect-oriented programming approach that helps to overcome this difficulty. Methods The L-system-based plant modelling language L+C was used to develop an aspect-oriented approach to plant modelling based on multi-modules. Each element of the plant structure was represented by a sequence of L-system modules (rather than a single module), with each module representing an aspect of the element's function. Separate sets of productions were used for modelling each aspect, with context-sensitive rules facilitated by local lists of modules to consider/ignore. Aspect weaving or communication between aspects was made possible through the use of pseudo-L-systems, where the strict-predecessor of a production rule was specified as a multi-module. Key Results The new approach was used to integrate previously modelled aspects of carbon dynamics, apical dominance and biomechanics with a model of a developing kiwifruit shoot. These aspects were specified independently and their implementation was based on source code provided by the original authors without major changes. Conclusions This new aspect-oriented approach to plant modelling is well suited for studying complex phenomena in plant science, because it can be used to integrate separate models of individual aspects of plant development and function, both previously constructed and new, into clearly organized, comprehensive FSPMs. In a future work, this approach could be further extended into an aspect-oriented programming language for FSPMs. PMID:21724653

A scattering model for defoliated vegetation

NASA Technical Reports Server (NTRS)

Karam, M. A.; Fung, A. K.

1986-01-01

A scattering model for defoliated vegetation is conceived as a layer of dielectric, finite-length cylinders with specified size and orientation distributions above an irregular ground surface. The scattering phase matrix of a single cylinder is computed, then the radiative transfer technique is applied to link volume scattering from vegetation to surface scattering from the soil surface. Polarized and depolarized scattering are computed and the effects of the cylinder size and orientation distributions are illustrated. It is found that size and orientation distributions have significant effects on the backscattered signal. The model is compared with scattering from defoliated trees and agricultural crops.

Properties of Vector Preisach Models

NASA Technical Reports Server (NTRS)

Kahler, Gary R.; Patel, Umesh D.; Torre, Edward Della

2004-01-01

This paper discusses rotational anisotropy and rotational accommodation of magnetic particle tape. These effects have a performance impact during the reading and writing of the recording process. We introduce the reduced vector model as the basis for the computations. Rotational magnetization models must accurately compute the anisotropic characteristics of ellipsoidally magnetizable media. An ellipticity factor is derived for these media that computes the two-dimensional magnetization trajectory for all applied fields. An orientation correction must be applied to the computed rotational magnetization. For isotropic materials, an orientation correction has been developed and presented. For anisotropic materials, an orientation correction is introduced.

Theoretical characterization of a model of aragonite crystal orientation in red abalone nacre

NASA Astrophysics Data System (ADS)

Coppersmith, S N; Gilbert, P U P A; Metzler, R A

2009-03-01

Nacre, commonly known as mother-of-pearl, is a remarkable biomineral that in red abalone consists of layers of 400 nm thick aragonite crystalline tablets confined by organic matrix sheets, with the [0 0 1] crystal axes of the aragonite tablets oriented to within ±12° from the normal to the layer planes. Recent experiments demonstrate that greater orientational order develops over a distance of tens of layers from the prismatic boundary at which nacre formation begins. Our previous simulations of a model in which the order develops because of differential tablet growth rates (oriented tablets growing faster than misoriented ones) yield patterns of tablets that agree qualitatively and quantitatively with the experimental measurements. This paper presents an analytical treatment of this model, focusing on how the dynamical development and eventual degree of order depend on model parameters. Dynamical equations for the probability distributions governing tablet orientations are introduced whose form can be determined from symmetry considerations and for which substantial analytic progress can be made. Numerical simulations are performed to relate the parameters used in the analytic theory to those in the microscopic growth model. The analytic theory demonstrates that the dynamical mechanism is able to achieve a much higher degree of order than naive estimates would indicate.

The IPM Wheat Model--results of a three-year study in North Rhine-Westphalia, Lower Saxony and Schleswig-Holstein.

PubMed

Verreet, J A; Heger, M; Oerke, E; Dehne, H W; Finger, I; Busse, C; Klink, H

2003-01-01

Under the primary utilisation of phytosanitary production factors such as selection of variety, crop rotation and N fertilisation according to plant requirements, the IPM Wheat Model comprises the elements diagnosis (qualitative = type of pathogen, quantitative = disease severity), scientifically grounded treatment thresholds which, as critical values in pathogen development, can be applied to define the optimum time of fungicide application, and pathogen-specific effective fungicides and application amounts. This leads to the location and year-specific optimised control of the pathogen and of the associated yield performance. After several years of development in Bavaria (from 1985 on) and Schleswig-Holstein (1993-1999), the model was tested as part of a project involving the Universities of Bonn and Kiel and the plant protection services of the German states of Lower Saxony, North Rhine-Westphalia and Schleswig-Holstein in a three-year study (1999-2001) in interregional locations (usually nine per state) with the winter wheat variety Ritmo (interregional indicator variety) and a further variety of regional importance in different variations (untreated control, three to four times growth stage-oriented variants for the determination of the absolute damage potential, IPM-variant). In exact records (approx. 12 dates per vegetation period), the disease epidemics were recorded weekly. With the genetically uniform indicator variety Ritmo, the results documented substantially differing year- and location-specific disease and yield patterns. Interregionally, a broad wheat pathogen spectrum (Puccinia striiformis, P. recondita, Septoria tritici, Stagonospora (syn. Septoria) nodorum, Blumeria (syn. Erysiphe) graminis, Pseudocercosporella herpotrichoides, Drechslera tritici-repentis) in differing composition, disease severity and damage effect was demonstrated. The heterogeneity of the infection and damage patterns was increased in the case of the second variety, in association with the genetic variability. The epidemiologically-orientated indications (average two, reduced application amounts) according to the IPM Wheat Model in association with time-diverging progressions led, on an interregional basis, with minimum input and in association with the diverging dynamics, to a biologically and economically optimised fungicide application. In the context of economic and ecological performance, the comprehensive results of the project demonstrated the valuable functionality of the IPM Wheat Model.

Creating continuity out of the disruption of a diagnosis of HIV during pregnancy.

PubMed

Kelly, Carmel; Alderdice, Fiona; Lohan, Maria; Spence, Dale

2012-06-01

To understand the uniqueness of the experience of testing HIV positive from the perspective of pregnant women. As more people learn of their HIV diagnosis through routine screening processes, it is timely to reflect on the impact of receiving an unexpected positive result. A prospective qualitative study. This paper draws on the case studies of four women who were participating in a larger prospective qualitative study of reproductive decision-making, pregnancy and childbirth following HIV diagnosis. Multiple interviews were conducted following diagnosis during pregnancy, and, after the birth of their babies. Thematic data analysis was undertaken. Drawing on Becker's theory of disruption, we document the 'sudden disjuncture' of their antenatal diagnosis and the embodied emotional struggle the women engaged in to create continuity in their lives. A diagnosis of HIV disrupted the women's biographies in terms of their health, relationships and social identity. As pregnant women, the threat of HIV was experienced most significantly in relation to their unborn child. However, their narratives also revealed how a diagnosis of HIV in the context of pregnancy, whilst traumatic, provided a focus for regaining continuity in their lives, as the baby became a metaphor for hope and orientation toward the future. As HIV testing becomes more 'routine', the findings of this study serve to remind health professionals that a positive diagnosis continues to constitute a major trauma to individuals and families. We propose that appropriately educated nursing and midwifery staff could facilitate the 'meaning making' process that is required for newly diagnosed HIV positive persons to find a subjective sense of well-being in their lives. © 2012 Blackwell Publishing Ltd.

Applying a Qualitative Modeling Shell to Process Diagnosis: The Caster System.

DTIC Science & Technology

1986-03-01

Process Diagnosis: The Caster System by Timothy F. Thompson and William J. Clancey Department of Computer Science Stanford University Stanford, CA 94303...MODELING SHELL TO PROCESS DIAGNOSIS: THE CASTER SYSTEM 12 PERSONAL AUTHOR(S) TIMOTHY F. THOMPSON. WESTINGHOUSE R&D CENTER, WILLIAM CLANCEY, STANFORD...editions are obsolete. Applying a Qualitative Modeling Shell to Process Diagnosis: The Caster System by Timothy F. Thompson, Westinghouse R&D Center

A systematic composite service design modeling method using graph-based theory.

PubMed

Elhag, Arafat Abdulgader Mohammed; Mohamad, Radziah; Aziz, Muhammad Waqar; Zeshan, Furkh

2015-01-01

The composite service design modeling is an essential process of the service-oriented software development life cycle, where the candidate services, composite services, operations and their dependencies are required to be identified and specified before their design. However, a systematic service-oriented design modeling method for composite services is still in its infancy as most of the existing approaches provide the modeling of atomic services only. For these reasons, a new method (ComSDM) is proposed in this work for modeling the concept of service-oriented design to increase the reusability and decrease the complexity of system while keeping the service composition considerations in mind. Furthermore, the ComSDM method provides the mathematical representation of the components of service-oriented design using the graph-based theoryto facilitate the design quality measurement. To demonstrate that the ComSDM method is also suitable for composite service design modeling of distributed embedded real-time systems along with enterprise software development, it is implemented in the case study of a smart home. The results of the case study not only check the applicability of ComSDM, but can also be used to validate the complexity and reusability of ComSDM. This also guides the future research towards the design quality measurement such as using the ComSDM method to measure the quality of composite service design in service-oriented software system.

A Systematic Composite Service Design Modeling Method Using Graph-Based Theory

PubMed Central

Elhag, Arafat Abdulgader Mohammed; Mohamad, Radziah; Aziz, Muhammad Waqar; Zeshan, Furkh

2015-01-01

The composite service design modeling is an essential process of the service-oriented software development life cycle, where the candidate services, composite services, operations and their dependencies are required to be identified and specified before their design. However, a systematic service-oriented design modeling method for composite services is still in its infancy as most of the existing approaches provide the modeling of atomic services only. For these reasons, a new method (ComSDM) is proposed in this work for modeling the concept of service-oriented design to increase the reusability and decrease the complexity of system while keeping the service composition considerations in mind. Furthermore, the ComSDM method provides the mathematical representation of the components of service-oriented design using the graph-based theoryto facilitate the design quality measurement. To demonstrate that the ComSDM method is also suitable for composite service design modeling of distributed embedded real-time systems along with enterprise software development, it is implemented in the case study of a smart home. The results of the case study not only check the applicability of ComSDM, but can also be used to validate the complexity and reusability of ComSDM. This also guides the future research towards the design quality measurement such as using the ComSDM method to measure the quality of composite service design in service-oriented software system. PMID:25928358

Couples coping with cardiovascular disease: A systematic review.

PubMed

Trump, Lisa J; Mendenhall, Tai J

2017-03-01

Cardiovascular disease (CVD) is the leading cause of death for both men and women. Its potential ramifications on all aspects of life, for patients and partners, are just beginning to be understood. Although research has focused on the individual who has received the diagnosis, relatively little is known about how couples manage CVD. This article presents a systematic review of literature that focuses on how couples cope with one partner's CVD diagnosis. A systematic review is warranted to orient practitioners, policy makers, and researchers to the state of existing knowledge and its gaps and to identify what still needs to be done. Data were extracted from 25 peer-reviewed articles that met our inclusion criteria. Content examined included theory integration, coping constructs and instruments, samples, analyses, and findings. Most articles successfully integrated theory in the studies' respective conceptualizations and designs. Most used valid and reliable instruments to measure coping. Principal limitations included problematic sampling strategies and analysis techniques, thereby limiting external validity. Principal implications of this review's findings relate to our fields' need to provide more care focused on dyads (vs. individual patients), adopt an integrated model in health care, and conduct systemic, longitudinal research to gain a better grasp on how coping changes over time. Doing so will serve to better equip providers in the support of patients and partners living with CVD. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Employee customer orientation in manufacturing organizations: joint influences of customer proximity and the senior leadership team.

PubMed

Liao, Hui; Subramony, Mahesh

2008-03-01

Pursuing a customer-focused strategy in manufacturing organizations requires employees across functions to embrace the importance of understanding customer needs and to align their everyday efforts with the goal of satisfying and retaining customers. Little prior research has examined what factors influence employee customer orientation in manufacturing settings. Drawing on the attraction-selection-attrition model, upper-echelons theory, and contingency theories of leadership, this study investigated the joint influences of functional roles' proximity to external customers and the senior leadership team's customer orientation on employee customer orientation. Hierarchical linear modeling results based on data obtained from 4,299 employees and 403 senior leaders from 42 facilities of a global manufacturer operating in 16 countries revealed that employees occupying customer-contact roles had the highest level of customer orientation, followed by employees occupying production roles, and then by those in support roles. In addition, there was a positive relationship between the senior leadership team's customer orientation and employee customer orientation for all 3 functional roles. The positive relationship between the senior leadership team and employee customer orientation was the strongest for employees in support roles, suggesting that lower levels of proximity to external customers may create a greater need for leadership in developing employees' customer-oriented attitudes. Copyright 2008 APA

Neural network configuration and efficiency underlies individual differences in spatial orientation ability.

PubMed

Arnold, Aiden E G F; Protzner, Andrea B; Bray, Signe; Levy, Richard M; Iaria, Giuseppe

2014-02-01

Spatial orientation is a complex cognitive process requiring the integration of information processed in a distributed system of brain regions. Current models on the neural basis of spatial orientation are based primarily on the functional role of single brain regions, with limited understanding of how interaction among these brain regions relates to behavior. In this study, we investigated two sources of variability in the neural networks that support spatial orientation--network configuration and efficiency--and assessed whether variability in these topological properties relates to individual differences in orientation accuracy. Participants with higher accuracy were shown to express greater activity in the right supramarginal gyrus, the right precentral cortex, and the left hippocampus, over and above a core network engaged by the whole group. Additionally, high-performing individuals had increased levels of global efficiency within a resting-state network composed of brain regions engaged during orientation and increased levels of node centrality in the right supramarginal gyrus, the right primary motor cortex, and the left hippocampus. These results indicate that individual differences in the configuration of task-related networks and their efficiency measured at rest relate to the ability to spatially orient. Our findings advance systems neuroscience models of orientation and navigation by providing insight into the role of functional integration in shaping orientation behavior.

Conductivity of Nanowire Arrays under Random and Ordered Orientation Configurations

PubMed Central

Jagota, Milind; Tansu, Nelson

2015-01-01

A computational model was developed to analyze electrical conductivity of random metal nanowire networks. It was demonstrated for the first time through use of this model that a performance gain in random metal nanowire networks can be achieved by slightly restricting nanowire orientation. It was furthermore shown that heavily ordered configurations do not outperform configurations with some degree of randomness; randomness in the case of metal nanowire orientations acts to increase conductivity. PMID:25976936

Statistical-mechanical analysis of self-organization and pattern formation during the development of visual maps

NASA Astrophysics Data System (ADS)

Obermayer, K.; Blasdel, G. G.; Schulten, K.

1992-05-01

We report a detailed analytical and numerical model study of pattern formation during the development of visual maps, namely, the formation of topographic maps and orientation and ocular dominance columns in the striate cortex. Pattern formation is described by a stimulus-driven Markovian process, the self-organizing feature map. This algorithm generates topologically correct maps between a space of (visual) input signals and an array of formal ``neurons,'' which in our model represents the cortex. We define order parameters that are a function of the set of visual stimuli an animal perceives, and we demonstrate that the formation of orientation and ocular dominance columns is the result of a global instability of the retinoptic projection above a critical value of these order parameters. We characterize the spatial structure of the emerging patterns by power spectra, correlation functions, and Gabor transforms, and we compare model predictions with experimental data obtained from the striate cortex of the macaque monkey with optical imaging. Above the critical value of the order parameters the model predicts a lateral segregation of the striate cortex into (i) binocular regions with linear changes in orientation preference, where iso-orientation slabs run perpendicular to the ocular dominance bands, and (ii) monocular regions with low orientation specificity, which contain the singularities of the orientation map. Some of these predictions have already been verified by experiments.

Sparse Bayesian Inference of White Matter Fiber Orientations from Compressed Multi-resolution Diffusion MRI

PubMed Central

Pisharady, Pramod Kumar; Duarte-Carvajalino, Julio M; Sotiropoulos, Stamatios N; Sapiro, Guillermo; Lenglet, Christophe

2017-01-01

The RubiX [1] algorithm combines high SNR characteristics of low resolution data with high spacial specificity of high resolution data, to extract microstructural tissue parameters from diffusion MRI. In this paper we focus on estimating crossing fiber orientations and introduce sparsity to the RubiX algorithm, making it suitable for reconstruction from compressed (under-sampled) data. We propose a sparse Bayesian algorithm for estimation of fiber orientations and volume fractions from compressed diffusion MRI. The data at high resolution is modeled using a parametric spherical deconvolution approach and represented using a dictionary created with the exponential decay components along different possible directions. Volume fractions of fibers along these orientations define the dictionary weights. The data at low resolution is modeled using a spatial partial volume representation. The proposed dictionary representation and sparsity priors consider the dependence between fiber orientations and the spatial redundancy in data representation. Our method exploits the sparsity of fiber orientations, therefore facilitating inference from under-sampled data. Experimental results show improved accuracy and decreased uncertainty in fiber orientation estimates. For under-sampled data, the proposed method is also shown to produce more robust estimates of fiber orientations. PMID:28845484

Sparse Bayesian Inference of White Matter Fiber Orientations from Compressed Multi-resolution Diffusion MRI.

PubMed

Pisharady, Pramod Kumar; Duarte-Carvajalino, Julio M; Sotiropoulos, Stamatios N; Sapiro, Guillermo; Lenglet, Christophe

2015-10-01

The RubiX [1] algorithm combines high SNR characteristics of low resolution data with high spacial specificity of high resolution data, to extract microstructural tissue parameters from diffusion MRI. In this paper we focus on estimating crossing fiber orientations and introduce sparsity to the RubiX algorithm, making it suitable for reconstruction from compressed (under-sampled) data. We propose a sparse Bayesian algorithm for estimation of fiber orientations and volume fractions from compressed diffusion MRI. The data at high resolution is modeled using a parametric spherical deconvolution approach and represented using a dictionary created with the exponential decay components along different possible directions. Volume fractions of fibers along these orientations define the dictionary weights. The data at low resolution is modeled using a spatial partial volume representation. The proposed dictionary representation and sparsity priors consider the dependence between fiber orientations and the spatial redundancy in data representation. Our method exploits the sparsity of fiber orientations, therefore facilitating inference from under-sampled data. Experimental results show improved accuracy and decreased uncertainty in fiber orientation estimates. For under-sampled data, the proposed method is also shown to produce more robust estimates of fiber orientations.

Edge-Related Activity Is Not Necessary to Explain Orientation Decoding in Human Visual Cortex.

PubMed

Wardle, Susan G; Ritchie, J Brendan; Seymour, Kiley; Carlson, Thomas A

2017-02-01

Multivariate pattern analysis is a powerful technique; however, a significant theoretical limitation in neuroscience is the ambiguity in interpreting the source of decodable information used by classifiers. This is exemplified by the continued controversy over the source of orientation decoding from fMRI responses in human V1. Recently Carlson (2014) identified a potential source of decodable information by modeling voxel responses based on the Hubel and Wiesel (1972) ice-cube model of visual cortex. The model revealed that activity associated with the edges of gratings covaries with orientation and could potentially be used to discriminate orientation. Here we empirically evaluate whether "edge-related activity" underlies orientation decoding from patterns of BOLD response in human V1. First, we systematically mapped classifier performance as a function of stimulus location using population receptive field modeling to isolate each voxel's overlap with a large annular grating stimulus. Orientation was decodable across the stimulus; however, peak decoding performance occurred for voxels with receptive fields closer to the fovea and overlapping with the inner edge. Critically, we did not observe the expected second peak in decoding performance at the outer stimulus edge as predicted by the edge account. Second, we evaluated whether voxels that contribute most to classifier performance have receptive fields that cluster in cortical regions corresponding to the retinotopic location of the stimulus edge. Instead, we find the distribution of highly weighted voxels to be approximately random, with a modest bias toward more foveal voxels. Our results demonstrate that edge-related activity is likely not necessary for orientation decoding. A significant theoretical limitation of multivariate pattern analysis in neuroscience is the ambiguity in interpreting the source of decodable information used by classifiers. For example, orientation can be decoded from BOLD activation patterns in human V1, even though orientation columns are at a finer spatial scale than 3T fMRI. Consequently, the source of decodable information remains controversial. Here we test the proposal that information related to the stimulus edges underlies orientation decoding. We map voxel population receptive fields in V1 and evaluate orientation decoding performance as a function of stimulus location in retinotopic cortex. We find orientation is decodable from voxels whose receptive fields do not overlap with the stimulus edges, suggesting edge-related activity does not substantially drive orientation decoding. Copyright © 2017 the authors 0270-6474/17/371187-10$15.00/0.

The DSM diagnostic criteria for gender identity disorder in adolescents and adults.

PubMed

Cohen-Kettenis, Peggy T; Pfäfflin, Friedemann

2010-04-01

Apart from some general issues related to the Gender Identity Disorder (GID) diagnosis, such as whether it should stay in the DSM-V or not, a number of problems specifically relate to the current criteria of the GID diagnosis for adolescents and adults. These problems concern the confusion caused by similarities and differences of the terms transsexualism and GID, the inability of the current criteria to capture the whole spectrum of gender variance phenomena, the potential risk of unnecessary physically invasive examinations to rule out intersex conditions (disorders of sex development), the necessity of the D criterion (distress and impairment), and the fact that the diagnosis still applies to those who already had hormonal and surgical treatment. If the diagnosis should not be deleted from the DSM, most of the criticism could be addressed in the DSM-V if the diagnosis would be renamed, the criteria would be adjusted in wording, and made more stringent. However, this would imply that the diagnosis would still be dichotomous and similar to earlier DSM versions. Another option is to follow a more dimensional approach, allowing for different degrees of gender dysphoria depending on the number of indicators. Considering the strong resistance against sexuality related specifiers, and the relative difficulty assessing sexual orientation in individuals pursuing hormonal and surgical interventions to change physical sex characteristics, it should be investigated whether other potentially relevant specifiers (e.g., onset age) are more appropriate.

Mechanical model of suture joints with fibrous connective layer

NASA Astrophysics Data System (ADS)

Miroshnichenko, Kateryna; Liu, Lei; Tsukrov, Igor; Li, Yaning

2018-02-01

A composite model for suture joints with a connective layer of aligned fibers embedded in soft matrix is proposed. Based on the principle of complementary virtual work, composite cylinder assemblage (CCA) approach and generalized self-consistent micro-mechanical models, a hierarchical homogenization methodology is developed to systematically quantify the synergistic effects of suture morphology and fiber orientation on the overall mechanical properties of sutures. Suture joints with regular triangular wave-form serve as an example material system to apply this methodology. Both theoretical and finite element mechanical models are developed and compared to evaluate the overall normal stiffness of sutures as a function of wavy morphology of sutures, fiber orientation, fiber volume fraction, and the mechanical properties of fibers and matrix in the interfacial layer. It is found that generally due to the anisotropy-induced coupling effects between tensile and shear deformation, the effective normal stiffness of sutures is highly dependent on the fiber orientation in the connective layer. Also, the effective shear modulus of the connective layer and the stiffness ratio between the fiber and matrix significantly influence the effects of fiber orientation. In addition, optimal fiber orientations are found to maximize the stiffness of suture joints.

Neuropsychological development of cognitive abilities: a new research strategy and some preliminary evidence for a sexual orientation model.

PubMed

Sanders, G; Ross-Field, L

1987-09-01

The organizing action that prenatal sex hormones exert on the brain has been implicated in the aetiology of sex differences in cognitive abilities and cerebral asymmetries. Prenatal sex hormones are known to determine neuroendocrine responses and subsequent adult sexual behaviour in nonhuman animals and these hormones may also influence human sexual orientation. To unify these observations, we elaborate a sexual orientation model of neuropsychological development which predicts that sex differences in neuroendocrine responses, cerebral asymmetries, and cognitive abilities are related to sexual orientation rather than to sex per se. A common problem in the study of sex differences is that biological and sociocultural explanations are confounded. The sexual orientation model suggests a new research strategy, the comparison of homosexual and heterosexual groups, for which explanations in terms of sociocultural factors would be more difficult to sustain. The available evidence supports the model: In terms of a neuroendocrine response, cerebral asymmetry, and cognitive abilities, homosexual males resemble heterosexual females rather than heterosexual males. Our conclusions lead to questions that further research in this area should address, and to a consideration of problems which such research may have to face.

Bundle Block Adjustment of Airborne Three-Line Array Imagery Based on Rotation Angles

PubMed Central

Zhang, Yongjun; Zheng, Maoteng; Huang, Xu; Xiong, Jinxin

2014-01-01

In the midst of the rapid developments in electronic instruments and remote sensing technologies, airborne three-line array sensors and their applications are being widely promoted and plentiful research related to data processing and high precision geo-referencing technologies is under way. The exterior orientation parameters (EOPs), which are measured by the integrated positioning and orientation system (POS) of airborne three-line sensors, however, have inevitable systematic errors, so the level of precision of direct geo-referencing is not sufficiently accurate for surveying and mapping applications. Consequently, a few ground control points are necessary to refine the exterior orientation parameters, and this paper will discuss bundle block adjustment models based on the systematic error compensation and the orientation image, considering the principle of an image sensor and the characteristics of the integrated POS. Unlike the models available in the literature, which mainly use a quaternion to represent the rotation matrix of exterior orientation, three rotation angles are directly used in order to effectively model and eliminate the systematic errors of the POS observations. Very good experimental results have been achieved with several real datasets that verify the correctness and effectiveness of the proposed adjustment models. PMID:24811075

Bundle block adjustment of airborne three-line array imagery based on rotation angles.

PubMed

Zhang, Yongjun; Zheng, Maoteng; Huang, Xu; Xiong, Jinxin

2014-05-07

In the midst of the rapid developments in electronic instruments and remote sensing technologies, airborne three-line array sensors and their applications are being widely promoted and plentiful research related to data processing and high precision geo-referencing technologies is under way. The exterior orientation parameters (EOPs), which are measured by the integrated positioning and orientation system (POS) of airborne three-line sensors, however, have inevitable systematic errors, so the level of precision of direct geo-referencing is not sufficiently accurate for surveying and mapping applications. Consequently, a few ground control points are necessary to refine the exterior orientation parameters, and this paper will discuss bundle block adjustment models based on the systematic error compensation and the orientation image, considering the principle of an image sensor and the characteristics of the integrated POS. Unlike the models available in the literature, which mainly use a quaternion to represent the rotation matrix of exterior orientation, three rotation angles are directly used in order to effectively model and eliminate the systematic errors of the POS observations. Very good experimental results have been achieved with several real datasets that verify the correctness and effectiveness of the proposed adjustment models.

Identification and Modelling of the In-Plane Reinforcement Orientation Variations in a CFRP Laminate Produced by Manual Lay-Up

NASA Astrophysics Data System (ADS)

Davila, Yves; Crouzeix, Laurent; Douchin, Bernard; Collombet, Francis; Grunevald, Yves-Henri

2017-08-01

Reinforcement angle orientation has a significant effect on the mechanical properties of composite materials. This work presents a methodology to introduce variable reinforcement angles into finite element (FE) models of composite structures. The study of reinforcement orientation variations uses meta-models to identify and control a continuous variation across the composite ply. First, the reinforcement angle is measured through image analysis techniques of the composite plies during the lay-up phase. Image analysis results show that variations in the mean ply orientations are between -0.5 and 0.5° with standard deviations ranging between 0.34 and 0.41°. An automatic post-treatment of the images determines the global and local angle variations yielding good agreements visually and numerically between the analysed images and the identified parameters. A composite plate analysed at the end of the cooling phase is presented as a case of study. Here, the variation in residual strains induced by the variability in the reinforcement orientation are up to 28% of the strain field of the homogeneous FE model. The proposed methodology has shown its capabilities to introduce material and geometrical variability into FE analysis of layered composite structures.

Identification and Modelling of the In-Plane Reinforcement Orientation Variations in a CFRP Laminate Produced by Manual Lay-Up

NASA Astrophysics Data System (ADS)

Davila, Yves; Crouzeix, Laurent; Douchin, Bernard; Collombet, Francis; Grunevald, Yves-Henri

2018-06-01

Reinforcement angle orientation has a significant effect on the mechanical properties of composite materials. This work presents a methodology to introduce variable reinforcement angles into finite element (FE) models of composite structures. The study of reinforcement orientation variations uses meta-models to identify and control a continuous variation across the composite ply. First, the reinforcement angle is measured through image analysis techniques of the composite plies during the lay-up phase. Image analysis results show that variations in the mean ply orientations are between -0.5 and 0.5° with standard deviations ranging between 0.34 and 0.41°. An automatic post-treatment of the images determines the global and local angle variations yielding good agreements visually and numerically between the analysed images and the identified parameters. A composite plate analysed at the end of the cooling phase is presented as a case of study. Here, the variation in residual strains induced by the variability in the reinforcement orientation are up to 28% of the strain field of the homogeneous FE model. The proposed methodology has shown its capabilities to introduce material and geometrical variability into FE analysis of layered composite structures.

WaLA, a versatile model for the life cycle assessment of urban water systems: Formalism and framework for a modular approach.

PubMed

Loubet, Philippe; Roux, Philippe; Bellon-Maurel, Véronique

2016-01-01

The emphasis on the sustainable urban water management has increased over the last decades. In this context decision makers need tools to measure and improve the environmental performance of urban water systems (UWS) and their related scenarios. In this paper, we propose a versatile model, named WaLA (Water system Life cycle Assessment), which reduces the complexity of the UWS while ensuring a good representation of water issues and fulfilling life cycle assessment (LCA) requirements. Indeed, LCAs require building UWS models, which can be tedious if several scenarios are to be compared. The WaLA model is based on a framework that uses a "generic component" representing alternately water technology units and water users, with their associated water flows, and the associated impacts due to water deprivation, emissions, operation and infrastructure. UWS scenarios can be built by inter-operating and connecting the technologies and users components in a modular and integrated way. The model calculates life cycle impacts at a monthly temporal resolution for a set of services provided to users, as defined by the scenario. It also provides the ratio of impacts to amount of services provided and useful information for UWS diagnosis or comparison of different scenarios. The model is implemented in a Matlab/Simulink interface thanks to object-oriented programming. The applicability of the model is demonstrated using a virtual case study based on available life cycle inventory data. Copyright © 2015 Elsevier Ltd. All rights reserved.

Enhanced cellulose orientation analysis in complex model plant tissues.

PubMed

Rüggeberg, Markus; Saxe, Friederike; Metzger, Till H; Sundberg, Björn; Fratzl, Peter; Burgert, Ingo

2013-09-01

The orientation distribution of cellulose microfibrils in the plant cell wall is a key parameter for understanding anisotropic plant growth and mechanical behavior. However, precisely visualizing cellulose orientation in the plant cell wall has ever been a challenge due to the small size of the cellulose microfibrils and the complex network of polymers in the plant cell wall. X-ray diffraction is one of the most frequently used methods for analyzing cellulose orientation in single cells and plant tissues, but the interpretation of the diffraction images is complex. Traditionally, circular or square cells and Gaussian orientation of the cellulose microfibrils have been assumed to elucidate cellulose orientation from the diffraction images. However, the complex tissue structures of common model plant systems such as Arabidopsis or aspen (Populus) require a more sophisticated approach. We present an evaluation procedure which takes into account the precise cell geometry and is able to deal with complex microfibril orientation distributions. The evaluation procedure reveals the entire orientation distribution of the cellulose microfibrils, reflecting different orientations within the multi-layered cell wall. By analyzing aspen wood and Arabidopsis stems we demonstrate the versatility of this method and show that simplifying assumptions on geometry and orientation distributions can lead to errors in the calculated microfibril orientation pattern. The simulation routine is intended to be used as a valuable tool for nanostructural analysis of plant cell walls and is freely available from the authors on request. Copyright © 2013 Elsevier Inc. All rights reserved.

Motivation and Performance within a Collaborative Computer-Based Modeling Task: Relations between Students' Achievement Goal Orientation, Self-Efficacy, Cognitive Processing, and Achievement

ERIC Educational Resources Information Center

Sins, Patrick H. M.; van Joolingen, Wouter R.; Savelsbergh, Elwin R.; van Hout-Wolters, Bernadette

2008-01-01

Purpose of the present study was to test a conceptual model of relations among achievement goal orientation, self-efficacy, cognitive processing, and achievement of students working within a particular collaborative task context. The task involved a collaborative computer-based modeling task. In order to test the model, group measures of…

A Model of Human Orientation and Self Motion Perception during Body Acceleration: The Orientation Modeling System

DTIC Science & Technology

2016-09-28

previous research and modeling results. The OMS and Perception Toolbox were used to perform a case study of an F18 mishap. Model results imply that...request documents from DTIC. Change of Address Organizations receiving reports from the U.S. Army Aeromedical Research Laboratory on automatic...54  Coriolis head movement during a coordinated turn. .............................................55  Case Study

Modeling and Predicting the Stress Relaxation of Composites with Short and Randomly Oriented Fibers

PubMed Central

Obaid, Numaira; Sain, Mohini

2017-01-01

The addition of short fibers has been experimentally observed to slow the stress relaxation of viscoelastic polymers, producing a change in the relaxation time constant. Our recent study attributed this effect of fibers on stress relaxation behavior to the interfacial shear stress transfer at the fiber-matrix interface. This model explained the effect of fiber addition on stress relaxation without the need to postulate structural changes at the interface. In our previous study, we developed an analytical model for the effect of fully aligned short fibers, and the model predictions were successfully compared to finite element simulations. However, in most industrial applications of short-fiber composites, fibers are not aligned, and hence it is necessary to examine the time dependence of viscoelastic polymers containing randomly oriented short fibers. In this study, we propose an analytical model to predict the stress relaxation behavior of short-fiber composites where the fibers are randomly oriented. The model predictions were compared to results obtained from Monte Carlo finite element simulations, and good agreement between the two was observed. The analytical model provides an excellent tool to accurately predict the stress relaxation behavior of randomly oriented short-fiber composites. PMID:29053601

Modeling Adaptable Business Service for Enterprise Collaboration

NASA Astrophysics Data System (ADS)

Boukadi, Khouloud; Vincent, Lucien; Burlat, Patrick

Nowadays, a Service Oriented Architecture (SOA) seems to be one of the most promising paradigms for leveraging enterprise information systems. SOA creates opportunities for enterprises to provide value added service tailored for on demand enterprise collaboration. With the emergence and rapid development of Web services technologies, SOA is being paid increasing attention and has become widespread. In spite of the popularity of SOA, a standardized framework for modeling and implementing business services are still in progress. For the purpose of supporting these service-oriented solutions, we adopt a model driven development approach. This paper outlines the Contextual Service Oriented Modeling and Analysis (CSOMA) methodology and presents UML profiles for the PIM level service-oriented architectural modeling, as well as its corresponding meta-models. The proposed PIM (Platform Independent Model) describes the business SOA at a high level of abstraction regardless of techniques involved in the application employment. In addition, all essential service-specific concerns required for delivering quality and context-aware service are covered. Some of the advantages of this approach are that it is generic and thus not closely allied with Web service technology as well as specifically treating the service adaptability during the design stage.

A Model Counting Characterization of Diagnoses

DTIC Science & Technology

2002-05-04

Hamscher et al., 1992] Hamscher W., Console L., and de [ Shanahan , 1993] Shanahan M. Explanation in the Situa- Kleer J. Readings in Model-Based Diagnosis...1998] Kohlas J., Anrig B., Haenni R., and ing: Diagnosis and Learning, Southampton, 1988. Monney P. A. Model-Based Diagnosis and Probabilistic [Struss

Benefits of object-oriented models and ModeliChart: modern tools and methods for the interdisciplinary research on smart biomedical technology.

PubMed

Gesenhues, Jonas; Hein, Marc; Ketelhut, Maike; Habigt, Moriz; Rüschen, Daniel; Mechelinck, Mare; Albin, Thivaharan; Leonhardt, Steffen; Schmitz-Rode, Thomas; Rossaint, Rolf; Autschbach, Rüdiger; Abel, Dirk

2017-04-01

Computational models of biophysical systems generally constitute an essential component in the realization of smart biomedical technological applications. Typically, the development process of such models is characterized by a great extent of collaboration between different interdisciplinary parties. Furthermore, due to the fact that many underlying mechanisms and the necessary degree of abstraction of biophysical system models are unknown beforehand, the steps of the development process of the application are iteratively repeated when the model is refined. This paper presents some methods and tools to facilitate the development process. First, the principle of object-oriented (OO) modeling is presented and the advantages over classical signal-oriented modeling are emphasized. Second, our self-developed simulation tool ModeliChart is presented. ModeliChart was designed specifically for clinical users and allows independently performing in silico studies in real time including intuitive interaction with the model. Furthermore, ModeliChart is capable of interacting with hardware such as sensors and actuators. Finally, it is presented how optimal control methods in combination with OO models can be used to realize clinically motivated control applications. All methods presented are illustrated on an exemplary clinically oriented use case of the artificial perfusion of the systemic circulation.

Orientation/Time Management Skill Training Lesson: Development and Evaluation

DTIC Science & Technology

1979-07-01

instructional environment. This Orientation/ Time Management lesson provides students with appropriate role models for increasing acceptance of their...time savings can be obtained by a combination of this type of orientation and time management skill training with a computer-based progress targeting

Predicting bending stiffness of randomly oriented hybrid panels

Treesearch

Laura Moya; William T.Y. Tze; Jerrold E. Winandy

2010-01-01

This study was conducted to develop a simple model to predict the bending modulus of elasticity (MOE) of randomly oriented hybrid panels. The modeling process involved three modules: the behavior of a single layer was computed by applying micromechanics equations, layer properties were adjusted for densification effects, and the entire panel was modeled as a three-...

Rethinking Classroom-Oriented Instructional Development Models to Mediate Instructional Planning in Technology-Enhanced Learning Environments

ERIC Educational Resources Information Center

Lim, Cher Ping; Chai, Ching Sing

2008-01-01

Although classroom-oriented instructional development (ID) models have the potential to help teachers think and plan for effective instruction with technology, research studies have shown that they are not widely employed. Many of these models have not factored in the complexities that teachers faced when planning for instruction in…

A Cognitive Model of How Interactive Multimedia Authoring Facilitates Conceptual Understanding of Object-Oriented Programming in Novices

ERIC Educational Resources Information Center

Yuen, Timothy; Liu, Min

2011-01-01

This paper presents a cognitive model of how interactive multimedia authoring (IMA) affect novices' cognition in object-oriented programming. This model was generated through an empirical study of first year computer science students at the university level being engaged in interactive multimedia authoring of a role-playing game. Clinical…

Adolescent Decision-Making Processes regarding University Entry: A Model Incorporating Cultural Orientation, Motivation and Occupational Variables

ERIC Educational Resources Information Center

Jung, Jae Yup

2013-01-01

This study tested a newly developed model of the cognitive decision-making processes of senior high school students related to university entry. The model incorporated variables derived from motivation theory (i.e. expectancy-value theory and the theory of reasoned action), literature on cultural orientation and occupational considerations. A…

Effect of Solvent and Substrate on the Surface Binding Mode of Carboxylate-Functionalized Aromatic Molecules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Domenico, Janna; Foster, Michael E.; Spoerke, Erik D.

Here, the efficiency of dye-sensitized solar cells (DSSCs) is strongly influenced by dye molecule orientation and interactions with the substrate. Understanding the factors controlling the surface orientation of sensitizing organic molecules will aid in the improvement of both traditional DSSCs and other devices that integrate molecular linkers at interfaces. Here, we describe a general approach to understand relative dye–substrate orientation and provide analytical expressions predicting orientation. We consider the effects of substrate, solvent, and protonation state on dye molecule orientation. In the absence of solvent, our model predicts that most carboxylic acid-functionalized molecules prefer to lie flat (parallel) on themore » surface, due to van der Waals interactions, as opposed to a tilted orientation with respect to the surface that is favored by covalent bonding of the carboxylic acid group to the substrate. When solvation effects are considered, however, the molecules are predicted to orient perpendicular to the surface. We extend this approach to help understand and guide the orientation of metal–organic framework (MOF) thin-film growth on various metal–oxide substrates. A two-part analytical model is developed on the basis of the results of DFT calculations and ab initio MD simulations that predicts the binding energy of a molecule by chemical and dispersion forces on rutile and anatase TiO 2 surfaces, and quantifies the dye solvation energy for two solvents. The model is in good agreement with the DFT calculations and enables rapid prediction of dye molecule and MOF linker binding preference on the basis of the size of the adsorbing molecule, identity of the surface, and the solvent environment. We establish the threshold molecular size, governing dye molecule orientation, for each condition.« less

Effect of Solvent and Substrate on the Surface Binding Mode of Carboxylate-Functionalized Aromatic Molecules

DOE PAGES

Domenico, Janna; Foster, Michael E.; Spoerke, Erik D.; ...

2018-04-25

Here, the efficiency of dye-sensitized solar cells (DSSCs) is strongly influenced by dye molecule orientation and interactions with the substrate. Understanding the factors controlling the surface orientation of sensitizing organic molecules will aid in the improvement of both traditional DSSCs and other devices that integrate molecular linkers at interfaces. Here, we describe a general approach to understand relative dye–substrate orientation and provide analytical expressions predicting orientation. We consider the effects of substrate, solvent, and protonation state on dye molecule orientation. In the absence of solvent, our model predicts that most carboxylic acid-functionalized molecules prefer to lie flat (parallel) on themore » surface, due to van der Waals interactions, as opposed to a tilted orientation with respect to the surface that is favored by covalent bonding of the carboxylic acid group to the substrate. When solvation effects are considered, however, the molecules are predicted to orient perpendicular to the surface. We extend this approach to help understand and guide the orientation of metal–organic framework (MOF) thin-film growth on various metal–oxide substrates. A two-part analytical model is developed on the basis of the results of DFT calculations and ab initio MD simulations that predicts the binding energy of a molecule by chemical and dispersion forces on rutile and anatase TiO 2 surfaces, and quantifies the dye solvation energy for two solvents. The model is in good agreement with the DFT calculations and enables rapid prediction of dye molecule and MOF linker binding preference on the basis of the size of the adsorbing molecule, identity of the surface, and the solvent environment. We establish the threshold molecular size, governing dye molecule orientation, for each condition.« less

The effect of synaptic plasticity on orientation selectivity in a balanced model of primary visual cortex

PubMed Central

Gonzalo Cogno, Soledad; Mato, Germán

2015-01-01

Orientation selectivity is ubiquitous in the primary visual cortex (V1) of mammals. In cats and monkeys, V1 displays spatially ordered maps of orientation preference. Instead, in mice, squirrels, and rats, orientation selective neurons in V1 are not spatially organized, giving rise to a seemingly random pattern usually referred to as a salt-and-pepper layout. The fact that such different organizations can sharpen orientation tuning leads to question the structural role of the intracortical connections; specifically the influence of plasticity and the generation of functional connectivity. In this work, we analyze the effect of plasticity processes on orientation selectivity for both scenarios. We study a computational model of layer 2/3 and a reduced one-dimensional model of orientation selective neurons, both in the balanced state. We analyze two plasticity mechanisms. The first one involves spike-timing dependent plasticity (STDP), while the second one considers the reconnection of the interactions according to the preferred orientations of the neurons. We find that under certain conditions STDP can indeed improve selectivity but it works in a somehow unexpected way, that is, effectively decreasing the modulated part of the intracortical connectivity as compared to the non-modulated part of it. For the reconnection mechanism we find that increasing functional connectivity leads, in fact, to a decrease in orientation selectivity if the network is in a stable balanced state. Both counterintuitive results are a consequence of the dynamics of the balanced state. We also find that selectivity can increase due to a reconnection process if the resulting connections give rise to an unstable balanced state. We compare these findings with recent experimental results. PMID:26347615

A clinically oriented comprehensive pictorial review of canine elbow anatomy.

PubMed

Constantinescu, Gheorghe M; Constantinescu, Ileana A

2009-02-01

The clinically oriented canine elbow anatomy in its complexity earned a high importance in surgery especially after multiple imaging modalities have been used in the benefit of diagnosis and treatment of canine elbow disorders. The bony, joint, and muscular structures, the arteries, the veins and the nerves supplying the elbow are described and illustrated in textbooks and atlases in the context of the comparative anatomy. Nevertheless, there is no publication focused on all of these structures described together from the skin to the bones in a systematic and topographic order, nor through cross and/or sagittal and coronal sections. The figures used in this article are original and drawn after dissection, cross, sagittal, and coronal sections of the elbow structures. The sections are correlated to the multiple imaging modalities shown in the next article.

Clinical engineering in Romania. The coming of age.

PubMed

Naianu, B P; Negoescu, R

Biomedical engineering (BME) includes clinical engineering and bioengineering. Bioengineering is academically oriented towards theory and research in biology using the methods of exact sciences such as maths and physics, while clinical engineering (CE) has a rather practical orientation focusing on the general management of clinic/hospital equipment and providing aid to the medical staff in the use of advanced technologies for diagnosis and therapy purposes. The Romanian physiological community has been closely involved in the growth of BME that has now come of age in this country. Radu Vrâncianu's great intuition in opening the door to this science and its practical application in an institution created by Daniel Danielopolu definitely represented a good chance for Romanian public health. Recently, both clinical engineering and medical bioengineering have been introduced into the Romanian Classification of Occupations.

Systematics and Taxonomy of the Long-horned Caddisfly Genus Tagalopsyche (Trichoptera: Leptoceridae)

NASA Astrophysics Data System (ADS)

Andersen, T.; Holzenthal, R. W.

2005-05-01

The long-horned caddisfly genus Tagalopsyche Banks 1913 contains 4 described species from the Oriental and Afrotropical regions: T. aethiopica Kimmins (Ethiopia), T. brunnea (Ulmer) (Indonesia), T. fletcheri Kimmins (India), and T. sisyroides Banks (Philippines), the type species. In addition, at least 6 new species are known from Ghana, India, Sri Lanka, and Malaysia, more than doubling the known species diversity. Diagnoses, descriptions, and illustrations of males and known females are provided for all species as well as a re-diagnosis of generic characters and a key to species. The genus is most closely related to Mystacides, with 19 species in the Nearctic, Palearctic and Oriental regions, with which is shares the synapomorpy: abdominal sternum IX of the male genitalia produced posteriorly. Little is known of the biology or ecology of the species.

A Note on Comparing Examinee Classification Methods for Cognitive Diagnosis Models

ERIC Educational Resources Information Center

Huebner, Alan; Wang, Chun

2011-01-01

Cognitive diagnosis models have received much attention in the recent psychometric literature because of their potential to provide examinees with information regarding multiple fine-grained discretely defined skills, or attributes. This article discusses the issue of methods of examinee classification for cognitive diagnosis models, which are…

Online model-based diagnosis to support autonomous operation of an advanced life support system.

PubMed

Biswas, Gautam; Manders, Eric-Jan; Ramirez, John; Mahadevan, Nagabhusan; Abdelwahed, Sherif

2004-01-01

This article describes methods for online model-based diagnosis of subsystems of the advanced life support system (ALS). The diagnosis methodology is tailored to detect, isolate, and identify faults in components of the system quickly so that fault-adaptive control techniques can be applied to maintain system operation without interruption. We describe the components of our hybrid modeling scheme and the diagnosis methodology, and then demonstrate the effectiveness of this methodology by building a detailed model of the reverse osmosis (RO) system of the water recovery system (WRS) of the ALS. This model is validated with real data collected from an experimental testbed at NASA JSC. A number of diagnosis experiments run on simulated faulty data are presented and the results are discussed.

Online model-based diagnosis to support autonomous operation of an advanced life support system

NASA Technical Reports Server (NTRS)

Biswas, Gautam; Manders, Eric-Jan; Ramirez, John; Mahadevan, Nagabhusan; Abdelwahed, Sherif

2004-01-01

This article describes methods for online model-based diagnosis of subsystems of the advanced life support system (ALS). The diagnosis methodology is tailored to detect, isolate, and identify faults in components of the system quickly so that fault-adaptive control techniques can be applied to maintain system operation without interruption. We describe the components of our hybrid modeling scheme and the diagnosis methodology, and then demonstrate the effectiveness of this methodology by building a detailed model of the reverse osmosis (RO) system of the water recovery system (WRS) of the ALS. This model is validated with real data collected from an experimental testbed at NASA JSC. A number of diagnosis experiments run on simulated faulty data are presented and the results are discussed.

Qualitative Event-Based Diagnosis: Case Study on the Second International Diagnostic Competition

NASA Technical Reports Server (NTRS)

Daigle, Matthew; Roychoudhury, Indranil

2010-01-01

We describe a diagnosis algorithm entered into the Second International Diagnostic Competition. We focus on the first diagnostic problem of the industrial track of the competition in which a diagnosis algorithm must detect, isolate, and identify faults in an electrical power distribution testbed and provide corresponding recovery recommendations. The diagnosis algorithm embodies a model-based approach, centered around qualitative event-based fault isolation. Faults produce deviations in measured values from model-predicted values. The sequence of these deviations is matched to those predicted by the model in order to isolate faults. We augment this approach with model-based fault identification, which determines fault parameters and helps to further isolate faults. We describe the diagnosis approach, provide diagnosis results from running the algorithm on provided example scenarios, and discuss the issues faced, and lessons learned, from implementing the approach

AN/SLQ-32 EW System Model: and Expandable, Object-Oriented, Process- Based Simulation

DTIC Science & Technology

1992-09-01

CONST threshold = 0.1; timetol = 0.01; orientol = 5.8; VAR rec, recLast :BufferBeamRecType; time,power : REAL; powerl,orientation : REAL; BEGIN NEW...PulseGroup); rec:-ASK BufferBeam Removed; time: =rec. time; orientation: =rec. orientation; OUTPUT ( "ORIENREFI, orientation); recLast :=ASK BufferBeam Last...TO Add(rec); IF (rec= recLast ) EXIT; END IF; rec :=ASK BufferBeam Remove o; ELSE ASK BufferBeam TO Add(rec); IF (rec = recLast ) EXIT; END IF; rec

Measuring market orientation: further evidence on Narver and Slater's three-component scale.

PubMed

Chakrabarty, Subhra; Rogé, Joseph N

2003-12-01

A mail survey of a national random sample of 2,000 marketing managers was conducted. The data provided by 222 respondents were analyzed to assess the dimensionality of Narver and Slater's 15-item measure of market orientation. A confirmatory factor analysis, using LISREL 8.53, provided support for each of the separate dimensions of customer orientation, competitor orientation, and interfunctional coordination. However, a combined 3-factor model of market orientation was not supported. Directions for research are suggested.

"On solid ground": family and school connectedness promotes adolescents' future orientation.

PubMed

Crespo, Carla; Jose, Paul E; Kielpikowski, Magdalena; Pryor, Jan

2013-10-01

The present study investigated the role of connectedness to the family and school contexts on future orientation of New Zealand adolescents. Participants were 1774 young people (51.9% female) aged between 9 and 16 years at time 1 of the study, who reported their connectedness to family and school and their perceptions of future orientation at three times of measurement one year apart. Structural equation modelling was used to test the combined role of family and school connectedness on future orientation over time. Findings supported a multiple mediation model in that adolescents' connectedness to family and school predicted more positive perceptions of future orientation both directly and indirectly via the effect of the context variables on each other. Copyright © 2013 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

C++, objected-oriented programming, and astronomical data models

NASA Technical Reports Server (NTRS)

Farris, A.

1992-01-01

Contemporary astronomy is characterized by increasingly complex instruments and observational techniques, higher data collection rates, and large data archives, placing severe stress on software analysis systems. The object-oriented paradigm represents a significant new approach to software design and implementation that holds great promise for dealing with this increased complexity. The basic concepts of this approach will be characterized in contrast to more traditional procedure-oriented approaches. The fundamental features of objected-oriented programming will be discussed from a C++ programming language perspective, using examples familiar to astronomers. This discussion will focus on objects, classes and their relevance to the data type system; the principle of information hiding; and the use of inheritance to implement generalization/specialization relationships. Drawing on the object-oriented approach, features of a new database model to support astronomical data analysis will be presented.

The impact of transit-oriented development on housing prices in San Diego, CA.

PubMed

Duncan, Michael

2011-01-01

This research measures the influence of transit-oriented development (TOD) on the San Diego, CA, condominium market. Many view TOD as a key element in creating a less auto dependent and more sustainable transport system. Price premiums indicate a potential for a market-driven expansion of TOD inventory. A hedonic price model is estimated to isolate statistically the effect of TOD. This includes interaction terms between station distance and various measures of pedestrian orientation. The resulting model shows that station proximity has a significantly stronger impact when coupled with a pedestrian-oriented environment. Conversely, station area condominiums in more auto-oriented environments may sell at a discount. This indicates that TOD has a synergistic value greater than the sum of its parts. It also implies a healthy demand for more TOD housing in San Diego.

Scrutinizing UML Activity Diagrams

NASA Astrophysics Data System (ADS)

Al-Fedaghi, Sabah

Building an information system involves two processes: conceptual modeling of the “real world domain” and designing the software system. Object-oriented methods and languages (e.g., UML) are typically used for describing the software system. For the system analysis process that produces the conceptual description, object-oriented techniques or semantics extensions are utilized. Specifically, UML activity diagrams are the “flow charts” of object-oriented conceptualization tools. This chapter proposes an alternative to UML activity diagrams through the development of a conceptual modeling methodology based on the notion of flow.

ENHANCED AIR POLLUTION EPIDEMIOLOGY USING A SOURCE-ORIENTED CHEMICAL TRANSPORT MODEL

EPA Science Inventory

Air quality model predictions describing source-oriented PM component concentrations in multiple size cuts will provide new inputs to examine the effects of acute and chronic PM exposure on mortality and morbidity. Associations between adverse health effects and PM sources/com...

A Review & Critique of Trainee-Oriented Training Programs.

ERIC Educational Resources Information Center

Klein-Konz, Ann; Todd-Mancillas, William R.

This paper reviews literature on trainee-oriented training programs, which assign to individual employees predominant responsibility for diagnosing organizational problems requiring changes in employees' behaviors. A Self-Change, Adaption, and Modification (SCAM) Model is developed. The literature support for the model is written in similar…

Exploring Learning-Oriented Assessment Processes

ERIC Educational Resources Information Center

Carless, David

2015-01-01

This paper proposes a model of learning-oriented assessment to inform assessment theory and practice. The model focuses on three interrelated processes: the assessment tasks which students undertake; students' development of self-evaluative capacities; and student engagement with feedback. These three strands are explored through the analysis of…

A comparison of two coaching approaches to enhance implementation of a recovery-oriented service model.

PubMed

Deane, Frank P; Andresen, Retta; Crowe, Trevor P; Oades, Lindsay G; Ciarrochi, Joseph; Williams, Virginia

2014-09-01

Moving to recovery-oriented service provision in mental health may entail retraining existing staff, as well as training new staff. This represents a substantial burden on organisations, particularly since transfer of training into practice is often poor. Follow-up supervision and/or coaching have been found to improve the implementation and sustainment of new approaches. We compared the effect of two coaching conditions, skills-based and transformational coaching, on the implementation of a recovery-oriented model following training. Training followed by coaching led to significant sustained improvements in the quality of care planning in accordance with the new model over the 12-month study period. No interaction effect was observed between the two conditions. However, post hoc analyses suggest that transformational coaching warrants further exploration. The results support the provision of supervision in the form of coaching in the implementation of a recovery-oriented service model, and suggest the need to better elucidate the mechanisms within different coaching approaches that might contribute to improved care.

Numerical simulation of fiber interaction in short-fiber injection-molded composite using different cavity geometries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thi, Thanh Binh Nguyen, E-mail: nttbinh@kit.ac.jp; Yokoyama, Atsushi, E-mail: yokoyama@kit.ac.jp; Hamanaka, Senji

The theoretical fiber-interaction model for calculating the fiber orientation in the injection molded short fiber/thermoplastic composite parts was proposed. The proposed model included the fiber dynamics simulation in order to obtain an equation of the global interaction coefficient and accurate estimate of the fiber interacts at all orientation states. The steps to derive the equation for this coefficient in short fiber suspension as a function of the fiber aspect ratio, volume fraction and general shear rate are delineated. Simultaneously, the high-resolution 3D X-ray computed tomography system XVA-160α was used to observe fiber distribution of short-glass-fiber-reinforced polyamide specimens using different cavitymore » geometries. The fiber orientation tensor components are then calculated. Experimental orientation measurements of short-glass-fiber-reinforced polyamide is used to check the ability of present theory for predicting orientation. The experiments and predictions show a quantitative agreement and confirm the basic understanding of fiber orientation in injection-molded composites.« less

X-ray absorption spectroscopy and EPR studies of oriented spinach thylakoid preparations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrews, J.C.

In this study, oriented Photosystem II (PS II) particles from spinach chloroplasts are studied with electron paramagnetic resonance (EPR) and x-ray absorption spectroscopy (XAS) to determine more details of the structure of the oxygen evolving complex (OEC). The nature of halide binding to Mn is also studied with Cl K-edge and Mn EXAFS (extended x-ray absorption fine structure) of Mn-Cl model compounds, and with Mn EXAFS of oriented PS II in which Br has replaced Cl. Attention is focused on the following: photosynthesis and the oxygen evolving complex; determination of mosaic spread in oriented photosystem II particles from signal IImore » EPR measurement; oriented EXAFS--studies of PS II in the S{sub 2} state; structural changes in PS II as a result of treatment with ammonia: EPR and XAS studies; studies of halide binding to Mn: Cl K-edge and Mn EXAFS of Mn-Cl model compounds and Mn EXAFS of oriented Br-treated photosystem II.« less

Numerical simulation of fiber interaction in short-fiber injection-molded composite using different cavity geometries

NASA Astrophysics Data System (ADS)

Thi, Thanh Binh Nguyen; Yokoyama, Atsushi; Hamanaka, Senji; Yamashita, Katsuhisa; Nonomura, Chisato

2016-03-01

The theoretical fiber-interaction model for calculating the fiber orientation in the injection molded short fiber/thermoplastic composite parts was proposed. The proposed model included the fiber dynamics simulation in order to obtain an equation of the global interaction coefficient and accurate estimate of the fiber interacts at all orientation states. The steps to derive the equation for this coefficient in short fiber suspension as a function of the fiber aspect ratio, volume fraction and general shear rate are delineated. Simultaneously, the high-resolution 3D X-ray computed tomography system XVA-160α was used to observe fiber distribution of short-glass-fiber-reinforced polyamide specimens using different cavity geometries. The fiber orientation tensor components are then calculated. Experimental orientation measurements of short-glass-fiber-reinforced polyamide is used to check the ability of present theory for predicting orientation. The experiments and predictions show a quantitative agreement and confirm the basic understanding of fiber orientation in injection-molded composites.

Predicted contextual modulation varies with distance from pinwheel centers in the orientation preference map

PubMed Central

Okamoto, Tsuyoshi; Ikezoe, Koji; Tamura, Hiroshi; Watanabe, Masataka; Aihara, Kazuyuki; Fujita, Ichiro

2011-01-01

In the primary visual cortex (V1) of some mammals, columns of neurons with the full range of orientation preferences converge at the center of a pinwheel-like arrangement, the ‘pinwheel center' (PWC). Because a neuron receives abundant inputs from nearby neurons, the neuron's position on the cortical map likely has a significant impact on its responses to the layout of orientations inside and outside its classical receptive field (CRF). To understand the positional specificity of responses, we constructed a computational model based on orientation preference maps in monkey V1 and hypothetical neuronal connections. The model simulations showed that neurons near PWCs displayed weaker but detectable orientation selectivity within their CRFs, and strongly reduced contextual modulation from extra-CRF stimuli, than neurons distant from PWCs. We suggest that neurons near PWCs robustly extract local orientation within their CRF embedded in visual scenes, and that contextual information is processed in regions distant from PWCs. PMID:22355631

Drug Distribution. Part 1. Models to Predict Membrane Partitioning.

PubMed

Nagar, Swati; Korzekwa, Ken

2017-03-01

Tissue partitioning is an important component of drug distribution and half-life. Protein binding and lipid partitioning together determine drug distribution. Two structure-based models to predict partitioning into microsomal membranes are presented. An orientation-based model was developed using a membrane template and atom-based relative free energy functions to select drug conformations and orientations for neutral and basic drugs. The resulting model predicts the correct membrane positions for nine compounds tested, and predicts the membrane partitioning for n = 67 drugs with an average fold-error of 2.4. Next, a more facile descriptor-based model was developed for acids, neutrals and bases. This model considers the partitioning of neutral and ionized species at equilibrium, and can predict membrane partitioning with an average fold-error of 2.0 (n = 92 drugs). Together these models suggest that drug orientation is important for membrane partitioning and that membrane partitioning can be well predicted from physicochemical properties.

Model of human dynamic orientation. Ph.D. Thesis; [associated with vestibular stimuli

NASA Technical Reports Server (NTRS)

Ormsby, C. C.

1974-01-01

The dynamics associated with the perception of orientation were modelled for near-threshold and suprathreshold vestibular stimuli. A model of the information available at the peripheral sensors which was consistent with available neurophysiologic data was developed and served as the basis for the models of the perceptual responses. The central processor was assumed to utilize the information from the peripheral sensors in an optimal (minimum mean square error) manner to produce the perceptual estimates of dynamic orientation. This assumption, coupled with the models of sensory information, determined the form of the model for the central processor. The problem of integrating information from the semi-circular canals and the otoliths to predict the perceptual response to motions which stimulated both organs was studied. A model was developed which was shown to be useful in predicting the perceptual response to multi-sensory stimuli.