Science.gov

Sample records for diagnostic dental radiography

  1. Clinical feline dental radiography.

    PubMed

    Lemmons, Matthew

    2013-05-01

    Dental radiography is a necessary diagnostic modality in small animal practice. It is not possible to accurately assess and diagnose tooth resorption, periodontal disease, endodontic disease, neoplasia and injury without it. Dental radiography is also necessary for treatment and assessment of the patient postoperatively.

  2. Intracranial arachnoid cyst on dental radiography: a diagnostic challenge.

    PubMed

    Sun, Lisha; Sun, Zhipeng; Ma, Xuchen

    2013-03-01

    Intracranial arachnoid cysts (IACs) can present as congenital asymptomatic lesions that may predispose them to present as an incidental finding during radiographic examination. On the other hand, IACs may also give rise to a series of neurologic symptoms depending on their size and location, such as vomiting, seizures, headache, and ataxia. Skull deformities, including macrocephaly, may occur and become remarkable on dental radiology. We report 2 patients who were identified with IAC before orthodontic treatment. The dental radiologic appearance of IAC is discussed and may constitute a diagnostic challenge to both the dentist and radiologist.

  3. Establishment of diagnostic reference levels for dental intraoral radiography.

    PubMed

    Manousaridis, G; Koukorava, C; Hourdakis, C J; Kamenopoulou, V; Yakoumakis, E; Tsiklakis, K

    2013-10-01

    Diagnostic reference levels (DRLs) is a tool for the optimisation of radiological procedures. Establishment of a DRL is a requirement of national regulations. Measurements performed by the Greek Atomic Energy Commission on 529 dental intraoral radiographic facilities have been used in order to define DRLs for digital and film imaging modalities, taking into account the region of the mouth to be imaged. Thus, different DRL values have been proposed for minimum (usually incisors), maximum (usually maxillary molars) and average exposure settings, both for film and digital imaging. The results have been compared with similar studies performed in Europe and the USA and are in line with the most recent ones.

  4. Establishment of diagnostic reference levels for dental panoramic radiography in Greece.

    PubMed

    Manousaridis, G; Koukorava, C; Hourdakis, C J; Kamenopoulou, V; Yakoumakis, E; Tsiklakis, K

    2015-07-01

    The purpose of the present study was to present the national diagnostic reference levels (DRL) established for panoramic dental examinations in Greece. The establishment of DRL, as a tool for the optimisation of radiological procedures, is a requirement of national regulations. Measurements performed by the Greek Atomic Energy Commission on 90 panoramic systems have been used for the derivation of DRL values. DRL values have been proposed for exposure settings of different patient types (child, small adult and standard adult), both for film and digital imaging. The DRLs for different patient types are grouped in three categories: children, small adults (corresponding to female) and average adults (corresponding to male). Proposed DRLs for these groups are 2.2, 3.3 and 4.1 mGy, respectively. In order to investigate the correlation of DRLs with the available imaging modalities (CR, DR and film), this parameter was taken into account. DR imaging DRL is the lowest at 3.5 mGy, CR imaging the highest at 4.2 mGy and film imaging at 3.7 mGy. In order to facilitate comparison with other studies, kerma-width product values were calculated from Ki, air and field size.

  5. Clinical canine dental radiography.

    PubMed

    Bannon, Kristin M

    2013-05-01

    The purpose of this article is to provide small animal veterinarians in private practice a guideline for interpretation of the most common findings in canine intraoral radiology. Normal oral and dental anatomy is presented. A brief review of variations of normal, common periodontal and endodontic pathology findings and developmental anomalies is provided.

  6. 42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section... individual State licensure processes, all of which include assessment of competence in dental radiography....

  7. 42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section... individual State licensure processes, all of which include assessment of competence in dental radiography....

  8. 42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section... individual State licensure processes, all of which include assessment of competence in dental radiography....

  9. 42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section... individual State licensure processes, all of which include assessment of competence in dental radiography....

  10. Thyroid dose distribution in dental radiography

    SciTech Connect

    Bristow, R.G.; Wood, R.E.; Clark, G.M. )

    1989-10-01

    The anatomic position and proven radiosensitivity of the thyroid gland make it an organ of concern in dental radiography. A calibrated thermoluminescent dosimetry system was used to investigate the absorbed dose (microGy) to the thyroid gland resultant from a minimum irradiated volume, intraoral full-mouth radiography technique with the use of rectangular collimation with a lead-backed image receptor, and conventional panoramic radiography performed with front and rear lead aprons. Use of the minimum irradiated volume technique resulted in a significantly decreased absorbed dose over the entire thyroid region ranging from 100% to 350% (p less than 0.05). Because this intraoral technique results in radiographs with greater image quality and also exposes the thyroid gland to less radiation than the panoramic, this technique may be an alternative to the panoramic procedure.

  11. A dose monitoring system for dental radiography

    PubMed Central

    Lee, Chena; Kim, Jo-Eun; Symkhampha, Khanthaly; Lee, Woo-Jin; Huh, Kyung-Hoe; Yi, Won-Jin; Heo, Min-Suk; Choi, Soon-Chul; Yeom, Heon-Young

    2016-01-01

    Purpose The current study investigates the feasibility of a platform for a nationwide dose monitoring system for dental radiography. The essential elements for an unerring system are also assessed. Materials and Methods An intraoral radiographic machine with 14 X-ray generators and five sensors, 45 panoramic radiographic machines, and 23 cone-beam computed tomography (CBCT) models used in Korean dental clinics were surveyed to investigate the type of dose report. A main server for storing the dose data from each radiographic machine was prepared. The dose report transfer pathways from the radiographic machine to the main sever were constructed. An effective dose calculation method was created based on the machine specifications and the exposure parameters of three intraoral radiographic machines, five panoramic radiographic machines, and four CBCTs. A viewing system was developed for both dentists and patients to view the calculated effective dose. Each procedure and the main server were integrated into one system. Results The dose data from each type of radiographic machine was successfully transferred to the main server and converted into an effective dose. The effective dose stored in the main server is automatically connected to a viewing program for dentist and patient access. Conclusion A patient radiation dose monitoring system is feasible for dental clinics. Future research in cooperation with clinicians, industry, and radiologists is needed to ensure format convertibility for an efficient dose monitoring system to monitor unexpected radiation dose. PMID:27358817

  12. Comparison of state dental radiography safety regulations.

    PubMed

    McDaniel, Thomas F; Parashar, Vijay

    2015-01-01

    The aim of this study was to compare and provide an overview of state policies on occupational exposure, dosimetry, collimation, patient protection, and the use of portable handheld X-ray machines in dentistry. State government webpages containing radiation protection rules and regulations were scanned. The contents were compared against current federal regulations established by the Nuclear Regulatory Commission (NRC) and the US Food and Drug Administration (FDA). They were further evaluated in light of current recommendations from the National Council on Radiation Protection & Measurements (NCRP) and the American Dental Association (ADA). Most states' regulations mirror the exposure limits set forth by the NRC and FDA. Nonregulatory recommendations regarding use of dental radiography are periodically put forth by the NCRP and the ADA. State and federal agencies often follow recommendations from these scientific organizations when creating regulations. Clinicians must be aware of their state's radiation protection rules, as variations among states exist. In addition, recommendations published by organizations such as the NCRP and the ADA, while not legally binding, contribute significantly to the reduction of radiation risks for operators and patients alike.

  13. 42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Standards for Licensing Dental Hygienists and...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section... personnel who perform radiologic procedures. Currently, Dental Hygienists are credentialed...

  14. Leaded apron for use in panoramic dental radiography

    SciTech Connect

    Whitcher, B.L.; Gratt, B.M.; Sickles, E.A.

    1980-05-01

    The leaded aprons currently available for use during dental radiography do not protect the thyroid gland from radiation. Conventional aprons may produce artifacts when used with panoramic dental x-ray units. This study measures the dose reduction obtained with an experimental leaded apron designed for use with panoramic dental x-ray units. Skin exposures measured at the thyroid and at the sternum were reduced with the use of the apron. Films produced during the study were free from apron artifacts.

  15. A benchmark for comparison of dental radiography analysis algorithms.

    PubMed

    Wang, Ching-Wei; Huang, Cheng-Ta; Lee, Jia-Hong; Li, Chung-Hsing; Chang, Sheng-Wei; Siao, Ming-Jhih; Lai, Tat-Ming; Ibragimov, Bulat; Vrtovec, Tomaž; Ronneberger, Olaf; Fischer, Philipp; Cootes, Tim F; Lindner, Claudia

    2016-07-01

    Dental radiography plays an important role in clinical diagnosis, treatment and surgery. In recent years, efforts have been made on developing computerized dental X-ray image analysis systems for clinical usages. A novel framework for objective evaluation of automatic dental radiography analysis algorithms has been established under the auspices of the IEEE International Symposium on Biomedical Imaging 2015 Bitewing Radiography Caries Detection Challenge and Cephalometric X-ray Image Analysis Challenge. In this article, we present the datasets, methods and results of the challenge and lay down the principles for future uses of this benchmark. The main contributions of the challenge include the creation of the dental anatomy data repository of bitewing radiographs, the creation of the anatomical abnormality classification data repository of cephalometric radiographs, and the definition of objective quantitative evaluation for comparison and ranking of the algorithms. With this benchmark, seven automatic methods for analysing cephalometric X-ray image and two automatic methods for detecting bitewing radiography caries have been compared, and detailed quantitative evaluation results are presented in this paper. Based on the quantitative evaluation results, we believe automatic dental radiography analysis is still a challenging and unsolved problem. The datasets and the evaluation software will be made available to the research community, further encouraging future developments in this field. (http://www-o.ntust.edu.tw/~cweiwang/ISBI2015/).

  16. Dental radiography exposure of the Hiroshima and Nagasaki populations

    SciTech Connect

    Antoku, S.; Hoshi, M.; Russell, W.J.; Kihara, T.; Sawada, S.; Takeshita, K.; Otake, M.; Yoshinaga, H.; Beach, D.R.

    1989-03-01

    Dental radiography doses in Hiroshima and Nagasaki were estimated on the basis of survey data from dental hospitals and clinics in Hiroshima and Nagasaki, and doses were measured by thermoluminescent dosimeters and a phantom. Doses to organs, including the lens, pituitary fossa, thyroid gland, and skin were calculated from data obtained during a 2-week survey in both cities. The mean caput doses were calculated from the data indicating frequency per year and were tabulated by organs, age, teeth examined, type of examination, population, sex, and city. No significant difference was observed by age, population, sex, or city. Currently the doses incurred during dental radiography may not be sufficiently high to cause bias in the assessments for late radiation effects among atomic-bomb survivors. However, the mean caput thyroid doses of 62 mrad and 67 mrad in Hiroshima and Nagasaki, respectively, cannot be ignored from the standpoint of their potential in contributing to radiation-induced carcinogenesis.

  17. Computers in dental radiography: a scenario for the future

    SciTech Connect

    Webber, R.L.

    1985-09-01

    The recent emergence of cost-effective computing power makes it possible to integrate sophisticated data-sampling and image-interpretation techniques into dental radiography for the first time. A prototype system is being developed to permit clinical information expressed in three dimensions--plus time--to be made visible almost instantly. The associated X-ray dose for a complete three-dimensional survey of a selected dental region is predicted to be less than that required for a single conventional periapical radiograph exposed on D-speed film.

  18. A note on digital dental radiography in forensic odontology.

    PubMed

    Chiam, Sher-Lin

    2014-09-01

    Digital dental radiography, intraoral and extraoral, is becoming more popular in dental practice. It offers convenience, such as lower exposure to radiation, ease of storing of images, and elimination of chemical processing. However, it also has disadvantages and drawbacks. One of these is the potential for confusion of the orientation of the image. This paper outlines one example of this, namely, the lateral inversion of the image. This source of confusion is partly inherent in the older model of phosphor storage plates (PSPs), as they allow both sides to be exposed without clue to the fact that the image is acquired on the wrong side. The native software allows digital manipulation of the X-ray image, permitting both rotation and inversion. Attempts to orientate the X-ray according to the indicator incorporated on the plate can then sometimes lead to inadvertent lateral inversion of the image. This article discusses the implications of such mistakes in dental digital radiography to forensic odontology and general dental practice.

  19. Diagnostic Imaging of Dental Disease in Pet Rabbits and Rodents.

    PubMed

    Capello, Vittorio

    2016-09-01

    Diagnostic imaging techniques are of paramount importance for dentistry and oral disorders of rabbits, rodents, and other exotic companion mammals. Aside from standard radiography, stomatoscopy is a complementary tool allowing a thorough and detailed inspection of the oral cavity. Computed tomography (CT) generates multiple 2-dimensional views and 3-dimensional reconstructions providing superior diagnostic accuracy also useful for prognosis and treatment of advanced dental disease and its related complications. MRI is a diagnostic imaging technique additional to CT used primarily to enhance soft tissues, including complex odontogenic abscesses.

  20. The quality of dental radiography in the Czech Republic--results of a TLD and film postal audit.

    PubMed

    Novák, Leos

    2006-01-01

    Since 2002, the postal audit in dental radiography has been supplementing standard quality control (QC) tools for dental intraoral X-ray machines. An aim of the audit is to check basic X-ray machine parameters (field size, exposure reproducibility), and a quality of the whole process of diagnostic imaging (entrance surface air-kerma measurement, a check of film processing and an image quality evaluation). The standard QC tests, performed by private companies, check mainly the X-ray unit. Conversely, the audit gives better information about the patient examination practices. During the period of January 2002 to May 2004 approximately 4000 audits were performed. The results confirmed that main problems in dental radiography are due to incorrect film processing, non-optimised setting of the exposure parameters and use of obsolete X-ray machines. Only approximately 30% of performed audits were satisfactory with respect to all checked parameters.

  1. Patient exposure trends in medical and dental radiography

    SciTech Connect

    Johnson, D.W.; Goetz, W.A.

    1986-01-01

    Patient exposure to medical and dental x rays has long been of interest to the radiological health community. With the cooperation of state and local agencies and professional groups, the Center for Devices and Radiological Health has conducted three major surveys of patient exposure to x rays. The latest of these surveys, the Nationwide Evaluation of X-ray Trends (NEXT), collected x-ray exposure data for each year starting in 1972. Two earlier studies, the 1964 and 1970 X-ray Exposure Studies collected x-ray data during the years these surveys were conducted. Exposure trends presented are based on results of all three studies. Major improvements in beam limitation are seen for medical and dental radiography. Since 1964, when the first nationwide survey was conducted, dental exposures have decreased about 75%. Decreases of up to one-third occurred in exposures for medical examinations. The current exposure data presented continue to show a wide variation in medical exposures. Also presented are organ doses for four organs (ovaries, testes, thyroid and active bone marrow).

  2. DDS: The Dental Diagnostic Simulation System.

    ERIC Educational Resources Information Center

    Tira, Daniel E.

    The Dental Diagnostic Simulation (DDS) System provides an alternative to simulation systems which represent diagnostic case studies of relatively limited scope. It may be used to generate simulated case studies in all of the dental specialty areas with case materials progressing through the gamut of the diagnostic process. The generation of a…

  3. Development of Compton Radiography Diagnostics for Inertial Confinement Fusion Implosions

    SciTech Connect

    Tommasini, R; Hatchett, S P; Hey, D S; Izumi, N; Koch, J A; Landen, O L; Mackinnon, A J; Delettrez, J; Glebov, V; Stoeckl, C

    2010-11-16

    An important diagnostic tool for inertial confinement fusion will be time-resolved radiographic imaging of the dense cold fuel surrounding the hot spot. The measurement technique is based on point-projection radiography at photon energies from 60-200 keV where the Compton effect is the dominant contributor to the opacity of the fuel or pusher. We have successfully applied this novel Compton Radiography technique to the study of the final compression of directly driven plastic capsules at the OMEGA facility. The radiographs have a spatial and temporal resolution of {approx}10 {micro}m and {approx}10ps, respectively. A statistical accuracy of {approx}0.5% in transmission per resolution element is achieved, allowing localized measurements of areal mass densities to 7% accuracy. The experimental results show 3D non-uniformities and lower than 1D expected areal densities attributed to drive asymmetries and hydroinstabilities.

  4. Quality assurance in dental radiography: intra-oral image quality analysis.

    PubMed

    Bolas, Andrew; Fitzgerald, Maurice

    With the introduction of criteria for clinical audit by the Irish Dental Council, and the statutory requirement on dentists to introduce this into their practice, this article will introduce the basic concepts of quality standards in intra-oral radiography and the subsequent application of these standards in an image quality audit cycle. Subjective image quality analysis is not a new concept, but its application can prove beneficial to both patient and dental practitioner. The ALARA (as low as reasonably achievable) principle is fundamental in radiation protection, and therefore the prevention of repeat exposures demonstrates one facet of this that the dental practitioner can employ within daily practice.

  5. General Dental Practitioners’ Concept towards Using Radiography and Apex-Locators in Endodontics

    PubMed Central

    Raoof, Maryam; Heidaripour, Maryam; Shahravan, Arash; Haghani, Jahangir; Afkham, Arash; Razifar, Mahsa; Mohammadizadeh, Sakineh

    2014-01-01

    Introduction: Despite being the gold standard as well as a routine technique in endodontics, radiographic working length (WL) determination owns many drawbacks. Electronic apex-locators (EALs) are recommended to complement radiographies. The aim of this study was to evaluate the perceptions of Iranian general dental practitioners (GDPs) towards using radiography and EAL. Methods and Materials: Three hundred and ninety one GDPs attending the 53th Iranian Dental Association Congress completed a questionnaire focusing on the use of radiography and EALs during the various stages of root canal treatment. The data was analyzed with the chi-square test with the level of significance set at 0.05. The results were then calculated as frequencies and percentages. Results: More than half of the GDPs reported using radiographs as the sole method for WL determination. A total of 30.4% of the practitioners were using the combined approach during root canal therapy of a single-rooted tooth, while 38.9% used this method in multi-rooted teeth. Approximately half of the respondents would not order follow-up radiographies after root canal treatment. Conclusion: Radiography continues to be the most common method for WL determination in Iran. PMID:25386209

  6. Diagnostics of coated fuel particles by neutron and synchrotron radiography

    SciTech Connect

    Momot, G. V.; Podurets, K. M.; Pogorelyi, D. K.; Somenkov, V. A.; Yakovenko, E. V.

    2011-12-15

    The nondestructive monitoring of coated fuel particles has been performed using contact neutron radiography and refraction radiography based on synchrotron radiation. It is shown that these methods supplement each other and have a high potential for determining the sizes, densities, and isotopic composition of the particle components.

  7. Biological effects of radiation from dental radiography. Council on Dental Materials, Instruments, and Equipment

    SciTech Connect

    Gibbs, S.J.

    1982-08-01

    Clearly, there is ample evidence of adverse effects of radiation in sufficient doses. There is at present no proof of such effects from doses commonly employed in dental practice; however, it has not been possible to prove the absence of such effects. Most experts now agree that there may be a small, difficult to quantify risk of cancer or genetic mutation from diagnostic exposure in patients and in personnel exposed during work. Prudence dictates acceptance of this position until proof to the contrary is available. This report has presented recent attempts to quantify the risk to patients based on speculative calculations and extrapolations. Indices of population risks indicate that medical radiology is the largest source of human-made genetic and leukemogenic radiation burden to the American public. Dental radiology contributes a small-but not necessarily insignificant-portion. Of major concern is the increasing use of radiation for diagnostic purposes in both medicine and dentistry. Technological advances have reduced exposure per examination; presumably this trend will continue so that total exposure of populations to radiation in the healing arts will not increase. Recent analyses suggest that the cancer risk to a patient from a dental radiographic examination is of the order of one in a million; the genetic risk is substantially less, about one in a billion. The risks appear to be essentially equal for full-mouth intraoral and for panoramic examinations. These estimates are numerically quite small, but the effects are severe. Thus, these risks cannot be ignored. However, we currently accept risks of similar magnitude in our daily lives (Table 9)50,51 In addition, the risk of failure to make an accurate diagnosis may be greater than the risk from exposure to the radiation from a justified and properly conducted radiographic examination.

  8. High-speed dental radiography achieved with a kilohertz-range pulsed x-ray generator

    SciTech Connect

    Takabe, Akihito; Yamamoto, Mariko; Sakamaki, Kimio

    1995-12-31

    The development of a high-intensity kilohertz-range pulsed x-ray generator and its application to dental radiography are described. The pulsed x-ray generator consisted of the following major components: a constant high-voltage power supply, a high-voltage main condenser, a hot-cathode triode, a DC power supply for the filament (hot cathode), and a grid controller. The main condenser of 0.5 {micro}F-100 kV in the pulser was charged from 50 to 70 kV by the power supply, and the electric charges in the condenser were discharged to the triode by the grid controller. To be exact, the tube voltage decreased during the discharging for generating pulsed x-rays, yet the maximum value was equivalent to the initial charging voltage of the main condenser. The maximum values of the tube current and the repetition rate were about 0.5 A and 30 kHz, respectively. The pulse width of the x-rays ranged from approximately 20 to 400 {micro}s, and the x-ray intensity with a charging voltage of 70 kV and a total resistance of 5.1 M{Omega} was about 0.83 {micro}C/kg at 1.0 m per pulse. Using this generator, high-speed dental radiography, e.g., delayed radiography and multiple-shot radiography, was performed.

  9. Digital radiography in the dental practice: an update.

    PubMed

    Makdissi, Jimmy; Pawar, Ravikiran

    2013-01-01

    The implementation of digital imaging in dental practice should be considered. The vast number of advantages of digital imaging include time saving and image manipulation. Dose reduction is a big attraction but in practical terms this might not be fully taken advantage of, as a number of studies suggest. Challenges of images storage, back-up and exchange should be taken into account. Careful planning and integration with practice software should lead to a smooth transition. Remember, computer systems sometimes fail and contingency plans should be in place to avoid disruption to the workflow of the practice.

  10. The development of a dental diagnostic terminology.

    PubMed

    Kalenderian, Elsbeth; Ramoni, Rachel L; White, Joel M; Schoonheim-Klein, Meta E; Stark, Paul C; Kimmes, Nicole S; Zeller, Gregory G; Willis, George P; Walji, Muhammad F

    2011-01-01

    There is no commonly accepted standardized terminology for oral diagnoses. The purpose of this article is to report the development of a standardized dental diagnostic terminology by a work group of dental faculty members. The work group developed guiding principles for decision making and adhered to principles of terminology development. The members used an iterative process to develop a terminology incorporating concepts represented in the Toronto/University of California, San Francisco/Creighton University and International Classification of Diseases (ICD)-9/10 codes and periodontal and endodontic diagnoses. Domain experts were consulted to develop a final list of diagnostic terms. A structure was developed, consisting of thirteen categories, seventy-eight subcategories, and 1,158 diagnostic terms, hierarchically organized and mappable to other terminologies and ontologies. Use of this standardized diagnostic terminology will reinforce the diagnosis-treatment link and will facilitate clinical research, quality assurance, and patient communication. Future work will focus on implementation and approaches to enhance the validity and reliability of diagnostic term utilization.

  11. [The exposure dose of the sella turcica in panoramic dental radiography with an intraoral radiogenic source].

    PubMed

    Pastremoli, A; Cucchi, G; Ciminari, R

    1991-06-01

    Panoramic dental radiography using an intraoral X-ray source exposes critical organs, such as the crystalline and the thyroid, as well as organs of fundamental importance such as the pituitary gland, to X-rays. An experimental study was carried out to assess the exposure dose to the sella turcica during the radiological examination of the upper and lower dental arches using an X-ray source within the oral cavity. The comprehensive exposure dose for the upper and lower dental arches exceeded that found in orthopantomography (110 micro Gy/examination vs 47 micro Gy/examination) with errors which are respectively inferior to 15% and 30%. The authors conclude that the risk of provoking anatomical or functional changes of the pituitary gland is extremely remote using this type of examination.

  12. Diagnostic Accuracy of Cone-Beam Computed Tomography and Periapical Radiography in Internal Root Resorption

    PubMed Central

    Madani, Zahrasadat; Moudi, Ehsan; Bijani, Ali; Mahmoudi, Elham

    2016-01-01

    Introduction: The aim of this study was to compare the diagnostic value of cone-beam computed tomography (CBCT) and periapical (PA) radiography in detecting internal root resorption. Methods and Materials: Eighty single rooted human teeth with visible pulps in PA radiography were split mesiodistally along the coronal plane. Internal resorption like lesions were created in three areas (cervical, middle and apical) in labial wall of the canals in different diameters. PA radiography and CBCT images were taken from each tooth. Two observers examined the radiographs and CBCT images to evaluate the presence of resorption cavities. The data were statistically analyzed and degree of agreement was calculated using Cohen’s kappa (k) values. Results: The mean±SD of agreement coefficient of kappa between the two observers of the CBCT images was calculated to be 0.681±0.047. The coefficients for the direct, mesial and distal PA radiography were 0.405±0.059, 0.421±0.060 and 0.432±0.056, respectively (P=0.001). The differences in the diagnostic accuracy of resorption of different sizes were statistically significant (P<0.05); however, the PA radiography and CBCT, had no statistically significant differences in detection of internal resorption lesions in the cervical, middle and apical regions. Conclusion: Though, CBCT has a higher sensitivity, specificity, positive predictive value and negative predictive value in comparison with conventional radiography, this difference was not significant. PMID:26843878

  13. Panoramic dental radiography image intensification employing minification techniques

    SciTech Connect

    Cushman, R.H.

    1981-09-01

    Panoramic dental x-ray machine wherein an x-ray source-camera assembly orbits a seated patient is described. A slot in the camera assembly collimates the x-rays which are continuously generated by the x-ray source, which x-rays are converted to light images of the patient's dental arch structure by only a single intensifying screen which remains stationary. This screen comprises about 1/40 the area of conventional intensifying screens and is made thicker for providing improved detection efficiency. A fiber optic minifying lens reduces the size of the image from the screen while proportionately increasing the light intensity of the image, thus making it possible to provide useable film images at reduced x-ray exposures due to non-linear film exposure versus optical density characteristics. The resultant minified, light-intensified image may now be recorded on 35 mm roll film, for example, as opposed to standard radiographic film of 5'' X 12'' size, or 12.70 cm X 30.48 cm.

  14. Dental diagnostics using optical coherence techniques

    SciTech Connect

    Nathel, H.; Colston, B.; Armitage, G.

    1994-11-15

    Optical radiation can be used for diagnostic purposes in oral medicine. However, due to the turbid, amorphous, and inhomogeneous nature of dental tissue conventional techniques used to transilluminate materials are not well suited to dental tissues. Optical coherence techniques either in the time- of frequency-domain offer the capabilities of discriminating scattered from unscattered light, thus allowing for imaging through turbid tissue. Currently, using optical time-domain reflectometry we are able to discriminate specular from diffuse reflections occurring at tissue boundaries. We have determined the specular reflectivity of enamel and dentin to be approximately 6.6 x 10{sup -5} and 1.3 x 10{sup -6}, respectively. Implications to periodontal imaging will be discussed.

  15. Chemical intensification of dental radiographs

    SciTech Connect

    Price, C.

    1983-04-01

    The potential applications of chemical intensification in dental radiography are explored. Three standard photographic intensifiers and three methods designed for radiographic use are evaluated. One of these methods is shown to be capable of reducing radiation dose to one half, without loss of diagnostic quality. Further work is necessary to achieve a system sufficiently practicable to deserve widespread use in routine clinical dental radiography.

  16. Development of backlighting sources for a Compton Radiography diagnostic of Inertial Confinement Fusion targets

    SciTech Connect

    Tommasini, R

    2010-04-23

    An important diagnostic tool for inertial confinement fusion is time-resolved imaging of the dense cold fuel surrounding the hot spot. Here we report on the source and diagnostic development of hard x-ray radiography and on the first radiographs of direct drive implosions obtained at photon energies up to about 100keV, where the Compton effect is the dominant contributor to the shell opacity. The radiographs of direct drive, plastic shell implosions obtained at the OMEGA laser facility have a spatial resolution of {approx}10um and a temporal resolution of {approx}10ps. This novel Compton Radiography is an invaluable diagnostic tool for Inertial Confinement Fusion targets, and will be integrated at the National Ignition Facility (NIF).

  17. Effective dose equivalent to the operator in intra-oral dental radiography

    SciTech Connect

    de Haan, R.A.; van Aken, J. )

    1990-08-01

    The effective dose equivalent to the operator in intra-oral dental radiography has been determined. The exposure from a bitewing radiograph and periapical views of the left maxillary incisors and first molar was measured at nine heights and 16 positions, all 1 m from the patient. The effective dose equivalent was determined using data from ICRP 51 (International Commission on Radiological Protection: Data for Use in Protection Against External Radiation). The values presented are related to an exposure of 1 C kg-1 (3876 R) measured free in air at the tube-end. They thus constitute ratios which are not influenced by the sensitivity of the film or other detector used and form standard tables which permit the calculation of the effective dose equivalent in clinical situations.

  18. Curricular Guidelines for Clinical Competency by Dental Auxiliaries in Dental Radiography.

    ERIC Educational Resources Information Center

    Journal of Dental Education, 1984

    1984-01-01

    Guidelines developed for educational institutions as curriculum development aids are presented. They are the result of efforts within the American Association of Dental Schools (AADS) by the Section on Oral Radiology. Their use as course development aids is suggested by AADS policy. (MLW)

  19. Comparison of radiography and scintigraphy in the diagnosis of dental disorders in the horse.

    PubMed

    Weller, R; Livesey, L; Maierl, J; Nuss, K; Bowen, I M; Cauvin, E R; Weaver, M; Schumacher, J; May, S A

    2001-01-01

    Scintigraphy, with 99mTechnetium methylenediphosphonate (99mTc-MDP) and 99mTc-labelled leucocytes, was compared to radiography in the diagnosis of dental disease in the horse in a prospective case-controlled study, comprising 30 horses with clinical signs of dental disease and 30 control horses. In each case, right and left lateral, ventral and dorsal soft tissue and bone phase scintigraphic images were obtained after i.v. injection of 1 GBq/100 kg bwt 99mTc-MDP, using a gamma camera. The same views were acquired in 10 horses with clinical signs of dental disease and 12 control horses after injection of 99mTc-labelled leucocytes. Standard radiographic projections of the paranasal sinuses and of the apices of the maxillary and mandibular teeth were obtained. The scintigraphs and radiographs were assessed subjectively by 2 board-certified surgeons and one board-certified radiologist, with extensive experience of equine radiology, from who the clinical history was withheld. Sensitivity, specificity and kappa, as a measure of agreement, were calculated for the different methods. Bone phase images were also scored subjectively on a scale from 0 to 3 on the basis of isotope uptake over the teeth. Regions of interest were defined over the teeth, and normal teeth compared to diseased counterparts. Total scintigraphic counts were related to the age of the animal and to the disease process. Differences in density ratios between left and right teeth were evaluated using the Mann-Whitney Test. Dental disease was confirmed in 22 horses at surgery or postmortem examination. Horses with dental disease showed a significant increase in scintigraphic activity over the affected tooth compared to the contralateral tooth, with a typical pattern for different diseases. The sensitivity of scintigraphy with 99mTc-MDP proved to be excellent (95.5%), whereas the specificity was moderate (86.4%). In contrast, radiography had excellent specificity (95.0%) and a low sensitivity (51.5%). The

  20. Diagnostic sensitivity of ultrasound, radiography and computed tomography for gender determination in four species of lizards.

    PubMed

    Di Ianni, Francesco; Volta, Antonella; Pelizzone, Igor; Manfredi, Sabrina; Gnudi, Giacomo; Parmigiani, Enrico

    2015-01-01

    Gender determination is frequently requested by reptile breeders, especially for species with poor or absent sexual dimorphism. The aims of the current study were to describe techniques and diagnostic sensitivities of ultrasound, radiography, and computed tomography for gender determination (identification of hemipenes) in four species of lizards. Nineteen lizards of known sex, belonging to four different species (Pogona vitticeps, Uromastyx aegyptia, Tiliqua scincoides, Gerrhosaurus major) were prospectively enrolled. With informed owner consent, ultrasound, noncontrast CT, contrast radiography, and contrast CT (with contrast medium administered into the cloaca) were performed in conscious animals. Imaging studies were reviewed by three different operators, each unaware of the gender of the animals and of the results of the other techniques. The lizard was classified as a male when hemipenes were identified. Nineteen lizards were included in the study, 10 females and nine males. The hemipenes were seen on ultrasound in only two male lizards, and appeared as oval hypoechoic structures. Radiographically, hemipenes filled with contrast medium appeared as spindle-shaped opacities. Noncontrast CT identified hemipenes in only two lizards, and these appeared as spindle-shaped kinked structures with hyperattenuating content consistent with smegma. Hemipenes were correctly identified in all nine males using contrast CT (accuracy of 100%). Accuracy of contrast radiography was excellent (94.7%). Accuracy of ultrasound and of noncontrast CT was poor (64.3% and 63.1%, respectively). Findings from the current study supported the use of contrast CT or contrast radiography for gender determination in lizards.

  1. A prospective study of medical diagnostic radiography and risk of thyroid cancer.

    PubMed

    Neta, Gila; Rajaraman, Preetha; Berrington de Gonzalez, Amy; Doody, Michele M; Alexander, Bruce H; Preston, Dale; Simon, Steven L; Melo, Dunstana; Miller, Jeremy; Freedman, D Michal; Linet, Martha S; Sigurdson, Alice J

    2013-04-15

    Although diagnostic x-ray procedures provide important medical benefits, cancer risks associated with their exposure are also possible, but not well characterized. The US Radiologic Technologists Study (1983-2006) is a nationwide, prospective cohort study with extensive questionnaire data on history of personal diagnostic imaging procedures collected prior to cancer diagnosis. We used Cox proportional hazard regressions to estimate thyroid cancer risks related to the number and type of selected procedures. We assessed potential modifying effects of age and calendar year of the first x-ray procedure in each category of procedures. Incident thyroid cancers (n = 251) were diagnosed among 75,494 technologists (1.3 million person-years; mean follow-up = 17 years). Overall, there was no clear evidence of thyroid cancer risk associated with diagnostic x-rays except for dental x-rays. We observed a 13% increase in thyroid cancer risk for every 10 reported dental radiographs (hazard ratio = 1.13, 95% confidence interval: 1.01, 1.26), which was driven by dental x-rays first received before 1970, but we found no evidence that the relationship between dental x-rays and thyroid cancer was associated with childhood or adolescent exposures as would have been anticipated. The lack of association of thyroid cancer with x-ray procedures that expose the thyroid to higher radiation doses than do dental x-rays underscores the need to conduct a detailed radiation exposure assessment to enable quantitative evaluation of risk.

  2. Comparative evaluation of the sensitometric properties of screen-film systems and conventional dental receptors for intraoral radiography

    SciTech Connect

    Kircos, L.T.; Staninec, M.; Chou, L.

    1989-12-01

    This investigation determined the sensitometric properties of 27 rare-earth screen-film combinations and compared them to E- and D-speed films and xeroradiography, the current standards for intraoral radiography. A series of exposures from base plus fog to film saturation were made to determine the Hurter and Driffield curve of each image receptor. The base plus fog, film saturation, speed, gamma, average gradient, and resolution were determined. When dental receptors and screen-film systems are compared on the basis of radiographic quality (contrast and resolution), many screen-film systems have similar resolution (greater than 10 line pairs/mm), significantly greater contrast (greater than 2.0), and a substantial speed advantage (greater than 10). Thus selected screen-film systems may be an alternative to conventional dental receptors for intraoral radiography.

  3. Dental radiography: efficacy in the assessment of intraosseous lesions of the face and jaws in asymptomatic patients

    SciTech Connect

    Zeichner, S.J.; Ruttimann, U.E.; Webber, R.L.

    1987-03-01

    In this investigation the efficacy of dental radiography for the detection of occult intraosseous lesions of the face and jaws was evaluated. An analysis of 30 million health insurance records indicated that the period prevalence of malignant lesions was less than 5 cases/million/year, and for benign lesions approximately 100 cases/million/year. Data from a controlled observer-performance study showed that radiographic sensitivities ranged between 50% and 80%. The cost per true-positive finding was estimated to be +8.6 million per malignant case and +430,000 per benign case. An assessment of the dosimetric literature indicated that the benefits of radiographic screening as a means for early detection of a malignancy appear to be counterbalanced by the risk of causing a radiation-induced malignancy. Taken together, these data demonstrate that dental radiography is not efficacious for the purpose of detecting occult lesions.

  4. Removing Distortion of Periapical Radiographs in Dental Digital Radiography Using Embedded Markers in an External frame

    PubMed Central

    Kafieh, Rahele; Shahamoradi, Mahdi; Hekmatian, Ehsan; Foroohandeh, Mehrdad; Emamidoost, Mostafa

    2012-01-01

    To carry out in vivo and in vitro comparative pilot study to evaluate the preciseness of a newly proposed digital dental radiography setup. This setup was based on markers placed on an external frame to eliminate the measurement errors due to incorrect geometry in relative positioning of cone, teeth and the sensor. Five patients with previous panoramic images were selected to undergo the proposed periapical digital imaging for in vivo phase. For in vitro phase, 40 extracted teeth were replanted in dry mandibular sockets and periapical digital images were prepared. The standard reference for real scales of the teeth were obtained through extracted teeth measurements for in vitro application and were calculated through panoramic imaging for in vivo phases. The proposed image processing thechnique was applied on periapical digital images to distinguish the incorrect geometry. The recognized error was inversely applied on the image and the modified images were compared to the correct values. The measurement findings after the distortion removal were compared to our gold standards (results of panoramic imaging or measurements from extracted teeth) and showed the accuracy of 96.45% through in vivo examinations and 96.0% through in vitro tests. The proposed distortion removal method is perfectly able to identify the possible inaccurate geometry during image acquisition and is capable of applying the inverse transform to the distorted radiograph to obtain the correctly modified image. This can be really helpful in applications like root canal therapy, implant surgical procedures and digital subtraction radiography, which are essentially dependent on precise measurements. PMID:23724372

  5. Diagnostic Ultrasonography of an Ankle Fracture Undetectable by Conventional Radiography: A Case Report

    PubMed Central

    Daniels, Clinton J.; Welk, Aaron B.; Enix, Dennis E.

    2016-01-01

    Objective The purpose of this study is to present diagnostic ultrasonography assessment of an occult fracture in a case of persistent lateral ankle pain. Clinical Features A 35-year-old woman presented to a chiropractic clinic with bruising, swelling, and pain along the distal fibula 3 days following an inversion ankle trauma. Prior radiographic examination at an urgent care facility was negative for fracture. Conservative care over the next week noted improvement in objective findings, but the pain persisted. Intervention and Outcome Diagnostic ultrasonography was ordered to assess her persistent ankle pain and showed a minimally displaced fracture of the fibula 4 cm proximal to the lateral malleolus. The patient was referred to her primary care physician and successfully managed with conservative care. Conclusion In this case, diagnostic ultrasonography was able to identify a Danis-Weber subtype B1 fracture that was missed by plain film radiography. PMID:27069430

  6. Attitudes and beliefs toward the use of a dental diagnostic terminology A survey of dental providers in a dental practice

    PubMed Central

    Ramoni, Rachel B.; Walji, Muhammad F.; Kim, Soyun; Tokede, Oluwabunmi; McClellan, Lyle; Simmons, Kristen; Skourtes, Eugene; Yansane, Alfa; White, Joel M.; Kalenderian, Elsbeth

    2015-01-01

    Background Attitudes and views are critical to the adoption of innovation. While there have been broadening calls for a standardized dental diagnostic terminology, little is known about the views of private practice dental team members towards the adoption of such a terminology. Methods A survey was developed using validated questions identified through literature review. Domain experts’ input allowed for further modifications. The final survey was administered electronically to 814 team members at a multi-office practice based in the Pacific Northwest. Results Response proportion was 92%. The survey had excellent reliability (Cronbach alpha coefficient = 0.87). Results suggested that participants showed, in general, positive attitudes and beliefs towards using a standardized diagnostic terminology in their practices. Additional written comments by participants highlighted the potential for improved communication with use of the terminology. Conclusions Dental providers and staff in one multi-office practice showed positive attitudes towards the use of a diagnostic terminology, specifically they believed it would improve communication between the dentist and patient as well as among providers, while expressing some concerns if using standardized dental diagnostic terms helps clinicians to deliver better dental care. Practical Implications As the dental profession is advancing towards the use of standardized diagnostic terminologies, successful implementation will require that dental team leaders prepare their dental teams by gauging their attitude toward the use of such a terminology. PMID:26025826

  7. Dental radiology for children

    SciTech Connect

    Myers, D.R.

    1984-01-01

    The benefit for the child from the judicious use of diagnostic dental radiography is improved dental health. The risk to the child from dental diagnostic radiation exposure appears to be extremely low. Despite the low risk, the dentist must minimize the child's exposure to ionizing radiation by using sound clinical judgment to determine what radiographs are necessary and to provide children with optimal protection from ionizing radiation.

  8. Dosimetric study of the effective doses resulting during dental X-ray and panoramic radiography

    NASA Astrophysics Data System (ADS)

    Shousha, Hany A.; Abd-El Hafez, A. I.; Ahmad, Fawzia

    2011-01-01

    The panoramic image is one of the most commonly used radiographic examinations in dentistry, owing to its low dose and large area for evaluation, including bone and teeth in the same image. Although digital images are usually reported to deliver a lower radiation dose to the patient, conventional images are still available, especially in countries where digital systems are not widely economically available. Dentists should weigh the benefits of dental radiographs against the consequences of increasing a patient's exposure to radiation, the effects of which accumulate from multiple sources over time. The "as low as reasonably achievable" principle should be followed to minimize the exposure to radiation. The purpose of this investigation is to measure the absorbed radiation doses at 12 anatomical sites of a Rando-phantom and calculate the effective doses result from a full-mouth survey and panoramic radiography. Organ-absorbed doses are measured using thermoluminescent dosimeters (TLD 100) and effective organ doses (μ Sv) are estimated according to the International Commission on Radiological Protection in 2007. The total effective dose results from the panoramic imaging system have so far been below those obtained using the full-mouth survey technique used in intra-oral radiographic examination.

  9. Diagnostic imaging for dental implant therapy.

    PubMed

    Nagarajan, Aishwarya; Perumalsamy, Rajapriya; Thyagarajan, Ramakrishnan; Namasivayam, Ambalavanan

    2014-01-01

    Dental implant is a device made of alloplastic (foreign) material implanted into the jaw bone beneath the mucosal layer to support a fixed or removable dental prosthesis. Dental implants are gaining immense popularity and wide acceptance because they not only replace lost teeth but also provide permanent restorations that do not interfere with oral function or speech or compromise the self-esteem of a patient. Appropriate treatment planning for replacement of lost teeth is required and imaging plays a pivotal role to ensure a satisfactory outcome. The development of pre-surgical imaging techniques and surgical templates helps the dentist place the implants with relative ease. This article focuses on various types of imaging modalities that have a pivotal role in implant therapy.

  10. Digital radiography: an overview.

    PubMed

    Parks, Edwin T; Williamson, Gail F

    2002-11-15

    Since the discovery of X-rays in 1895, film has been the primary medium for capturing, displaying, and storing radiographic images. It is a technology that dental practitioners are the most familiar and comfortable with in terms of technique and interpretation. Digital radiography is the latest advancement in dental imaging and is slowly being adopted by the dental profession. Digital imaging incorporates computer technology in the capture, display, enhancement, and storage of direct radiographic images. Digital imaging offers some distinct advantages over film, but like any emerging technology, it presents new and different challenges for the practitioner to overcome. This article presents an overview of digital imaging including basic terminology and comparisons with film-based imaging. The principles of direct and indirect digital imaging modalities, intraoral and extraoral applications, image processing, and diagnostic efficacy will be discussed. In addition, the article will provide a list of questions dentists should consider prior to purchasing digital imaging systems for their practice.

  11. Integrating Research-Informed Teaching within an Undergraduate Level 4 (Year 1) Diagnostic Radiography Curriculum: A Pilot Study

    ERIC Educational Resources Information Center

    Higgins, Robert; Hogg, Peter; Robinson, Leslie

    2013-01-01

    This article discusses the piloting and evaluation of the Research-informed Teaching experience (RiTe) project. The aim of RiTe was to link teaching and learning with research within an undergraduate diagnostic radiography curriculum. A preliminary pilot study of RiTe was undertaken with a group of level 4 (year 1) volunteer BSc (Hons) diagnostic…

  12. Comparison of Diagnostic Performance of Semi-Quantitative Knee Ultrasound and Knee Radiography with MRI: Oulu Knee Osteoarthritis Study.

    PubMed

    Podlipská, Jana; Guermazi, Ali; Lehenkari, Petri; Niinimäki, Jaakko; Roemer, Frank W; Arokoski, Jari P; Kaukinen, Päivi; Liukkonen, Esa; Lammentausta, Eveliina; Nieminen, Miika T; Tervonen, Osmo; Koski, Juhani M; Saarakkala, Simo

    2016-03-01

    Osteoarthritis (OA) is a common degenerative musculoskeletal disease highly prevalent in aging societies worldwide. Traditionally, knee OA is diagnosed using conventional radiography. However, structural changes of articular cartilage or menisci cannot be directly evaluated using this method. On the other hand, ultrasound is a promising tool able to provide direct information on soft tissue degeneration. The aim of our study was to systematically determine the site-specific diagnostic performance of semi-quantitative ultrasound grading of knee femoral articular cartilage, osteophytes and meniscal extrusion, and of radiographic assessment of joint space narrowing and osteophytes, using MRI as a reference standard. Eighty asymptomatic and 79 symptomatic subjects with mean age of 57.7 years were included in the study. Ultrasound performed best in the assessment of femoral medial and lateral osteophytes, and medial meniscal extrusion. In comparison to radiography, ultrasound performed better or at least equally well in identification of tibio-femoral osteophytes, medial meniscal extrusion and medial femoral cartilage morphological degeneration. Ultrasound provides relevant additional diagnostic information on tissue-specific morphological changes not depicted by conventional radiography. Consequently, the use of ultrasound as a complementary imaging tool along with radiography may enable more accurate and cost-effective diagnostics of knee osteoarthritis at the primary healthcare level.

  13. Free focus radiography with miniaturized dental x-ray machines: a comparison of ''midline'' and ''lateral'' techniques

    SciTech Connect

    Jensen, T.W.

    1983-08-01

    The use of free focus radiography (FFR) employing miniaturized dental x-ray machines with radiation probes has never been generally accepted in dentistry despite its recognized radiographic potential. The present investigation studied ways to improve imaging and lower radiation burdens in dental free focus radiography. Relatively high air exposures ranging from 42,050 mR per film for high-resolution images to 3,214 mR per film for lower-resolution images using a current midline radiographic technique for panoramic FFR were found. In a proposed lateral FFR panoramic technique, reduced exposures ranged from 420 mR per film for high-resolution images to 14 mR per film for lower-resolution images. In each technique the lower exposure was obtained with a rare earth imaging system. A proposed modification of the current midline FFR technique using a rare earth imaging system and heavy added copper filtration was found to produce exposures in the range normally used in dentistry (207 mr), and the resultant image was high in contrast with relatively low detail. A comparison of essential characteristics of midline and lateral FFR techniques failed to identify specific advantages for the midline technique in current use. Lateral exposure modes in dental FFR should receive increased attention in the interest of good imaging and radiation control. It was noted that existing miniaturized dental x-ray machines may have been designed specifically for use of the midline FFR exposure technique, and modification of this equipment to support reliable lateral exposure modes was recommended.

  14. Dental and dental hygiene students' diagnostic accuracy in oral radiology: effect of diagnostic strategy and instructional method.

    PubMed

    Baghdady, Mariam T; Carnahan, Heather; Lam, Ernest W N; Woods, Nicole N

    2014-09-01

    There has been much debate surrounding diagnostic strategies and the most appropriate training models for novices in oral radiology. It has been argued that an analytic approach, using a step-by-step analysis of the radiographic features of an abnormality, is ideal. Alternative research suggests that novices can successfully employ non-analytic reasoning. Many of these studies do not take instructional methodology into account. This study evaluated the effectiveness of non-analytic and analytic strategies in radiographic interpretation and explored the relationship between instructional methodology and diagnostic strategy. Second-year dental and dental hygiene students were taught four radiographic abnormalities using basic science instructions or a step-by-step algorithm. The students were tested on diagnostic accuracy and memory immediately after learning and one week later. A total of seventy-three students completed both immediate and delayed sessions and were included in the analysis. Students were randomly divided into two instructional conditions: one group provided a diagnostic hypothesis for the image and then identified specific features to support it, while the other group first identified features and then provided a diagnosis. Participants in the diagnosis-first condition (non-analytic reasoning) had higher diagnostic accuracy then those in the features-first condition (analytic reasoning), regardless of their learning condition. No main effect of learning condition or interaction with diagnostic strategy was observed. Educators should be mindful of the potential influence of analytic and non-analytic approaches on the effectiveness of the instructional method.

  15. X-ray vector radiography for bone micro-architecture diagnostics.

    PubMed

    Potdevin, Guillaume; Malecki, Andreas; Biernath, Thomas; Bech, Martin; Jensen, Torben H; Feidenhans'l, Robert; Zanette, Irene; Weitkamp, Timm; Kenntner, Johannes; Mohr, Jürgen; Roschger, Paul; Kerschnitzki, Michael; Wagermaier, Wolfgang; Klaushofer, Klaus; Fratzl, Peter; Pfeiffer, Franz

    2012-06-07

    The understanding of large biophysical systems at the systems level often depends on a precise knowledge of their microstructure. This is difficult to obtain, especially in vivo, because most imaging methods are either limited in terms of achievable field of view, or make use of penetrating ionizing radiations such as x-rays, in which case the resolution is severely limited by the deposited dose. Here, we describe a new method, x-ray vector radiography (XVR), which yields various types of information about the local orientation, anisotropy and average size of the sample microstructures. We demonstrate the feasibility by showing first experimental XVRs of human vertebra bone samples, giving information on the trabecular structures even with a pixel resolution of half a millimetre, much larger than the structures themselves. This last point is critical for the development of low-dose measurement methods which will allow for in vivo studies and potentially in the future for new medical diagnostics methods of bone metabolic disorder diseases such as osteoporosis.

  16. Forensic age diagnostics using projection radiography of the clavicle: a prospective multi-center validation study.

    PubMed

    Wittschieber, Daniel; Ottow, Christian; Schulz, Ronald; Püschel, Klaus; Bajanowski, Thomas; Ramsthaler, Frank; Pfeiffer, Heidi; Vieth, Volker; Schmidt, Sven; Schmeling, Andreas

    2016-01-01

    The radiological investigation of the ossification stage of the medial clavicular epiphysis represents the crucial tool for assessing whether a living individual has completed the age of 18 years. However, exposure to radiation cannot always be accepted due to legal reasons and radiation-free methods still lack reference data or are not available. Therefore, this study examines the role of pre-existing radiographic material of the clavicles, making it necessary to prospectively validate the established five-stage classification system for evaluating the clavicular ossification process as well as to enlarge the so far very limited pool of available reference data. Accordingly, standard posterior-anterior projection radiographs of 836 sternoclavicular joints prospectively obtained during 418 forensic autopsies (age range 15-30 years) were analyzed. Stage III was first found at ages 16 and 15 (males/females), stage IV at ages 22 and 21 (males/females), and stage V at age 26 in both sexes. The presented results principally corroborate the previous reference data from 2004, suggesting reliability of the five-stage classification system. In conclusion, chest radiographs may still be useful for forensic age diagnostics in living individuals but only in certain cases. In age estimations which can be planned in advance, projection radiography of the clavicle must still be considered obsolete.

  17. X-ray vector radiography for bone micro-architecture diagnostics

    NASA Astrophysics Data System (ADS)

    Potdevin, Guillaume; Malecki, Andreas; Biernath, Thomas; Bech, Martin; Jensen, Torben H.; Feidenhans'l, Robert; Zanette, Irene; Weitkamp, Timm; Kenntner, Johannes; Mohr, Jürgen; Roschger, Paul; Kerschnitzki, Michael; Wagermaier, Wolfgang; Klaushofer, Klaus; Fratzl, Peter; Pfeiffer, Franz

    2012-06-01

    The understanding of large biophysical systems at the systems level often depends on a precise knowledge of their microstructure. This is difficult to obtain, especially in vivo, because most imaging methods are either limited in terms of achievable field of view, or make use of penetrating ionizing radiations such as x-rays, in which case the resolution is severely limited by the deposited dose. Here, we describe a new method, x-ray vector radiography (XVR), which yields various types of information about the local orientation, anisotropy and average size of the sample microstructures. We demonstrate the feasibility by showing first experimental XVRs of human vertebra bone samples, giving information on the trabecular structures even with a pixel resolution of half a millimetre, much larger than the structures themselves. This last point is critical for the development of low-dose measurement methods which will allow for in vivo studies and potentially in the future for new medical diagnostics methods of bone metabolic disorder diseases such as osteoporosis.

  18. Diagnostic accuracy and added value of dual-energy subtraction radiography compared to standard conventional radiography using computed tomography as standard of reference

    PubMed Central

    Martini, Katharina; Baessler, Marco; Baumueller, Stephan; Frauenfelder, Thomas

    2017-01-01

    Purpose To retrospectively evaluate diagnostic performance of dual-energy subtraction radiography (DESR) for interpretation of chest radiographs compared to conventional radiography (CR) using computed tomography (CT) as standard of reference. Material and methods A total of 199 patients (75 female, median age 67) were included in this institutional review board (IRB)-approved clinical trial. All patients were scanned in posteroanterior and lateral direction with dual-shot DE-technique. Chest CT was performed within ±72 hours. The system provides three types of images: bone weighted-image, soft tissue weighted-image, herein termed as DESR-images, and a standard image, termed CR-image (marked as CR-image). Images were evaluated by two radiologists for presence of inserted life support lines, pneumothorax, pleural effusion, infectious consolidation, interstitial lung changes, tumor, skeletal alterations, soft tissue alterations, aortic or tracheal calcification and pleural thickening. Inter-observer agreement between readers and diagnostic performance were calculated. McNemar’s test was used to test for significant differences. Results Mean inter-observer agreement throughout the investigated parameters was higher in DESR images compared to CR-images (kDESR = 0.935 vs. kCR = 0.858). DESR images provided significantly increased sensitivity compared to CR-images for the detection of infectious consolidations (42% vs. 62%), tumor (46% vs. 57%), interstitial lung changes (69% vs. 87%) and aortic or tracheal calcification (25 vs. 73%) (p<0.05). There were no significant differences in sensitivity for the detection of inserted life support lines, pneumothorax, pleural effusion, skeletal alterations, soft tissue alterations or pleural thickening (p>0.05). Conclusion DESR increases significantly the sensibility without affecting the specificity evaluating chest radiographs, with emphasis on the detection of interstitial lung diseases. PMID:28301584

  19. Comparison of Diagnostic Accuracy of Radiation Dose-Equivalent Radiography, Multidetector Computed Tomography and Cone Beam Computed Tomography for Fractures of Adult Cadaveric Wrists

    PubMed Central

    Neubauer, Jakob; Benndorf, Matthias; Reidelbach, Carolin; Krauß, Tobias; Lampert, Florian; Zajonc, Horst; Kotter, Elmar; Langer, Mathias; Fiebich, Martin; Goerke, Sebastian M.

    2016-01-01

    Purpose To compare the diagnostic accuracy of radiography, to radiography equivalent dose multidetector computed tomography (RED-MDCT) and to radiography equivalent dose cone beam computed tomography (RED-CBCT) for wrist fractures. Methods As study subjects we obtained 10 cadaveric human hands from body donors. Distal radius, distal ulna and carpal bones (n = 100) were artificially fractured in random order in a controlled experimental setting. We performed radiation dose equivalent radiography (settings as in standard clinical care), RED-MDCT in a 320 row MDCT with single shot mode and RED-CBCT in a device dedicated to musculoskeletal imaging. Three raters independently evaluated the resulting images for fractures and the level of confidence for each finding. Gold standard was evaluated by consensus reading of a high-dose MDCT. Results Pooled sensitivity was higher in RED-MDCT with 0.89 and RED-MDCT with 0.81 compared to radiography with 0.54 (P = < .004). No significant differences were detected concerning the modalities’ specificities (with values between P = .98). Raters' confidence was higher in RED-MDCT and RED-CBCT compared to radiography (P < .001). Conclusion The diagnostic accuracy of RED-MDCT and RED-CBCT for wrist fractures proved to be similar and in some parts even higher compared to radiography. Readers are more confident in their reporting with the cross sectional modalities. Dose equivalent cross sectional computed tomography of the wrist could replace plain radiography for fracture diagnosis in the long run. PMID:27788215

  20. Preliminary Evaluation of an Educational Outcomes Assessment Process for Dental Interpretive Radiography.

    ERIC Educational Resources Information Center

    Weems, Richard A.; And Others

    1992-01-01

    A procedure for testing the ability of dental students to detect presence and depth of dental caries was evaluated. Students (n=40) from four experience groups examined radiographs obtained from a model. Results indicated that this method of assessing student competence in radiographic interpretation is valid. (MSE)

  1. The iliac crest in forensic age diagnostics: evaluation of the apophyseal ossification in conventional radiography.

    PubMed

    Wittschieber, Daniel; Vieth, Volker; Domnick, Christoph; Pfeiffer, Heidi; Schmeling, Andreas

    2013-03-01

    Due to the increasing significance of forensic age estimations in the age of globalisation, novel radiographic criteria besides clavicles and hand bones may provide additional certainty for forensic age expertises. The present study analyses the suitability of the iliac crest apophysis by means of 643 pelvic radiographs of patients between 10 and 30 years of age. Retrospective assessments were carried out according to the forensically established classification and sub-classification systems modified after Kreitner et al. (Rofo 166(6):481-486, 1997) and Kellinghaus et al. (Int J Legal Med 124(4):321-325, 2010). The basic ossification stages range from 1 to 4, and the sub-stages of stage 2 and 3 range from a to c. While stage 3c was first achieved at the age of 15 by both sexes, stage 4 was first observed in females at the age of 16 and in males at the age of 17. This indicates the possibility of a valid diagnosis of both the age of 14 and the age of 16 years which represent legally relevant age thresholds in numerous countries. Applied as targeted radiography on the iliac crest, the exposure to radiation would range between other radiographic techniques recently applied. Therefore, the iliac crest apophysis appears principally suitable as novel possible criterion for forensic age estimation in the living. However, for the establishment of the iliac crest apophysis in routine diagnostics, further studies are needed focussing on the comparison of different grading systems and different radiological techniques.

  2. Pulse oximetry as a diagnostic tool in dental medicine

    NASA Astrophysics Data System (ADS)

    Kosturkov, D.; Uzunov, Ts.; Uzunova, P.

    2016-01-01

    One of the most widespread optical methods used in biophotonics is the pulse oximetry, which is based on the measurement of light-modulated pulse wave of blood. This is a non-invasive, objective method for evaluation of the blood supply. Recently it has become very popular in dental medicine for the measurement of the condition of pulp microcirculation. The aim of our research is to evaluate the possibilities of pulse oximetry for estimation the pulp microcirculation in intact teeth among young patients. Results obtained clearly show that this method can be applied to assess the pulp condition and could be used in clinical practice in combination with other diagnostic methods.

  3. Assessing use of a standardized dental diagnostic terminology in an electronic health record.

    PubMed

    Tokede, Oluwabunmi; White, Joel; Stark, Paul C; Vaderhobli, Ram; Walji, Muhammad F; Ramoni, Rachel; Schoonheim-Klein, Meta; Kimmes, Nicole; Tavares, Anamaria; Kalenderian, Elsbeth

    2013-01-01

    Although standardized terminologies such as the International Classification of Diseases have been in use in medicine for over a century, efforts in the dental profession to standardize dental diagnostic terms have not achieved widespread acceptance. To address this gap, a standardized dental diagnostic terminology, the EZCodes, was developed in 2009. Fifteen dental education institutions in the United States and Europe have implemented the EZCodes dental diagnostic terminology. This article reports on the utilization and valid entry of the EZCodes at three of the dental schools that have adopted this standardized dental diagnostic terminology. Electronic data on the use of procedure codes with diagnostic terms from the three schools over a period from July 2010 to June 2011 were aggregated. The diagnostic term and procedure code pairs were adjudicated by three calibrated dentists. Analyses were conducted to gain insight into the utilization and valid entry of the EZCodes diagnostic terminology in the one-year period. Error proportions in the entry of diagnostic term (and by diagnostic category) were also computed. In the twelve-month period, 29,965 diagnostic terms and 249,411 procedure codes were entered at the three institutions resulting in a utilization proportion of 12 percent. Caries and periodontics were the most frequently used categories. More than 1,000 of the available 1,321 diagnostic terms were never used. Overall, 60.5 percent of the EZCodes entries were found to be valid. The results demonstrate low utilization of EZCodes in an electronic health record and raise the need for specific training of dental providers on the importance of using dental diagnostic terminology and specifically how to use the terms in the electronic record. These findings will serve to increase the use/correct use of the EZCodes dental diagnostic terminology and ultimately create a reliable platform for undertaking clinical, outcomes, and quality improvement-related research.

  4. The current status of panoramic radiography.

    PubMed

    Hirschmann, P N

    1987-03-01

    The current status of dental panoramic tomography (rotational panoramic radiography) is reviewed. This technique is based on a combination of tomography and slit-beam radiography to provide an image of both jaws on a single film. There is a greater degree of image degradation when compared with conventional radiographic techniques due to tomographic blurring, magnification and distortion, secondary images and burn-out. Meticulous patient position is essential to accommodate their jaws to the image layer determined by the manufacturers. The absorbed doses from panoramic radiography are of a similar order to that from bitewing radiography and lower than those from a full-mouth periapical series. The individual risk of 1.3 X 10(-6) is compared with that from other radiographic examinations and smoking. The collective risk, 1.04 deaths in the UK in 1981, is relatively insignificant as is the genetic dose. The risk to the dentist and his staff is also low compared to other risks. The methods of dose limitation currently available are reviewed. The clinical indications are considered in relation to the guidelines of the American Dental Association and the Dental Estimates Board in the UK. The problems associated with attempts to measure diagnostic yield are considered. In view of the world-wide public concern at the potential dangers of ionising radiation, dentists are urged to maximize the diagnostic yield from their panoramic radiography by taking such radiographs only when clinically necessary, ensuring meticulous positioning and processing, followed by scrupulous assessment of the radiography for any sign of pathological change.

  5. Determining the age of cats by pulp cavity/tooth width ratio using dental radiography.

    PubMed

    Park, Kyoungsun; Ahn, Jaesang; Kang, Sunmee; Lee, Euiri; Kim, Soohyun; Park, Sangwan; Park, Sungwon; Noh, Hyunwoo; Seo, Kangmoon

    2014-12-01

    The purpose of this study was to evaluate the effect of age on the ratio of pulp cavity/tooth width (P/T ratio) in healthy cats. The dental radiographs of 32 cats (16 males and 16 females) were generated with a digital dental X-ray unit with the animals under general anesthesia. Standardized measurement of the canine teeth was performed by drawing a line on the radiograph perpendicular to the cemento- enamel junction (CEJ) of the tooth. There was an inversely proportional correlation between chronological age and the P/T ratio. Moreover, a strong Pearson squared correlation (γ(2) = 0.92) was identified by the curved regression model. No significant differences in the P/T ratio based on gender or breed were found. These results suggest that determination of age by P/T ratio could be clinically useful for estimating the chronological age of cats.

  6. Assessment of dental abnormalities by full-mouth radiography in small breed dogs.

    PubMed

    Kim, Chun-Geun; Lee, So-Young; Kim, Ju-Won; Park, Hee-Myung

    2013-01-01

    This study was performed to evaluate full-mouth radiographic findings to determine the prevalence of dental abnormalities and analyze the relationship between dental abnormalities and age in small breed dogs. Sixteen predetermined categories of abnormal radiographic findings were evaluated in 233 small breed dogs. In total, 9,786 possible permanent teeth could be evaluated. Of those, 8,308 teeth were evaluated and abnormal radiographic findings were found in 2,458 teeth (29.6%). The most common teeth with abnormal radiographic findings were the mandibular first molars (74.5% on the left and 63.9% on the right) and the maxillary fourth premolars (40.5% on the left and 38.2% on the right). Bone loss of any type (15.8%) was the most commonly detected radiographic abnormal finding among the 16 categories. Dental conditions with a genetic predisposition were frequently occurred in the mandibular premolar teeth. Shih tzu frequently had unerupted teeth and dentigerous cysts. Among the teeth with abnormal radiographic findings, 4.5%, 19.8%, and 5.3% were considered incidental, additional, and important, respectively. Findings that were only detected on radiographs, which were not noted on routine oral examination, were more common in older dogs. Full-mouth radiographic evaluation should be performed to obtain important information for making accurate diagnoses.

  7. Technique-dependent decrease in thyroid absorbed dose for dental radiography.

    PubMed

    Wood, R E; Bristow, R G; Clark, G M; Nussbaum, C; Taylor, K W

    1989-06-01

    A LiF thermoluminescent dosimetry (TLD) system, calibrated in the tissue of interest with the beam used for experimentation, was employed to investigate dosages (muGy) to the thyroid region of an anthropomorphic phantom resultant from two dental complete-mouth radiographic procedures. Both techniques were compared in terms of dosages associated with combinations of lead apron and thyroid collar shielding while using a 70-kVp or 90-kVp x-ray beam for a 20-film complete-mouth series. Lead shielding significantly decreased the dose to the thyroid using both techniques (p less than 0.05). The use of the 90-kVp beam resulted in a significant reduction in the thyroid absorbed dose when using the bisecting angle technique (p less than 0.05) but caused a significant increase in the thyroid absorbed dose when the paralleling technique was used (p less than 0.05). The implementation of higher kilovoltage techniques in dental offices must therefore be dependent on the radiographic technique employed.

  8. Technique-dependent decrease in thyroid absorbed dose for dental radiography

    SciTech Connect

    Wood, R.E.; Bristow, R.G.; Clark, G.M.; Nussbaum, C.; Taylor, K.W.

    1989-06-01

    A LiF thermoluminescent dosimetry (TLD) system, calibrated in the tissue of interest with the beam used for experimentation, was employed to investigate dosages (muGy) to the thyroid region of an anthropomorphic phantom resultant from two dental complete-mouth radiographic procedures. Both techniques were compared in terms of dosages associated with combinations of lead apron and thyroid collar shielding while using a 70-kVp or 90-kVp x-ray beam for a 20-film complete-mouth series. Lead shielding significantly decreased the dose to the thyroid using both techniques (p less than 0.05). The use of the 90-kVp beam resulted in a significant reduction in the thyroid absorbed dose when using the bisecting angle technique (p less than 0.05) but caused a significant increase in the thyroid absorbed dose when the paralleling technique was used (p less than 0.05). The implementation of higher kilovoltage techniques in dental offices must therefore be dependent on the radiographic technique employed.

  9. Stitched large format CMOS image sensors for dental x-ray digital radiography

    NASA Astrophysics Data System (ADS)

    Liu, Xinqiao (Chiao); Fowler, Boyd; Do, Hung; Jaffe, Mark; Rassel, Richard; Leidy, Bob

    2012-10-01

    In this paper, we present a family of large format CIS's designed for dental x-ray applications. The CIS areas vary from small 31.5mm x 20.1mm, to medium 34.1mm x 26.3mm, to large 37.1mm x 26.3mm. Pixel size is 19.5um x 19.5um. The sensor family was fabricated in a 0.18um CIS process. Stitching is used in the CIS fabrication for the medium and large size sensors. We present the CIS and detector system design that includes pixel circuitry, readout circuitry, x-ray trigger mechanism, scintillator, and the camera electronics. We also present characterization results including the detector performances under both visible light and x-ray radiation.

  10. Exposure Geometry And Film Contrast Differences As Bases For Incomplete Cancellation Of Irrelevant Structures In Dental Subtraction Radiography

    NASA Astrophysics Data System (ADS)

    Ruttimann, Urs E.; Okano, Tomohiro; Grondahl, Hans-Goran; Grondahl, Kerstin; Webber, Richard L.

    1981-11-01

    Subtraction radiography for longitudinal studies requires both reproducible imaging geometry and film contrast characteristics to permit perfect alignment of the radiographs, and achieve good cancellation of diagnostically irrelevant background structures. The standard deviation (SD) of gray levels about the mean in a subtraction image was used as a relative measure of the residual structured noise. In order to estimate the effects of improperly standardized radiographs on SD in the subtraction image, both the imaging angle and film exposure time were systematically varied. The results showed that SD changed linear for small misalignment angles of the central beam, the variance attributable to this error source reaching about the same magnitude as the variance due to anatomical differences for angulation errors within ±20. The SD increase due to large film contrast disparity could be partly reverted for angulation errors within this bound by using a quadratic transformation which matched the first two moments of the gray level distributions in the two parent radiographs. Therefore, in order to use some of the retrospective data obtained under less stringent standardizations for subtraction imagery, it appears possible to adjust for differences in film contrast, and, perhaps, correct for geometric misalignment by a separate algorithm.

  11. [The diagnostic value of oblique technique for periapical radiography and its usefulness in endodontic treatment].

    PubMed

    Mikołajczak, Teresa; Wilk, Grazyna

    2008-01-01

    The applicability of the intraoral X-rays in the oblique projection during the endodontic treatment is described in this study. The rules concerning the positioning of the X-ray tube, intraoral film and the examined tooth, necessary to obtain images in mesial and distal oblique projections are discussed. The usefulness of the aforementioned projections in visualizing the anatomy, anomalies as well as periapical changes of the dental roots and canals during the endodontic treatment is presented.

  12. Development of backlighting sources for a Compton radiography diagnostic of inertial confinement fusion targets (invited)

    SciTech Connect

    Tommasini, R.; MacPhee, A.; Hey, D.; Ma, T.; Chen, C.; Izumi, N.; Unites, W.; MacKinnon, A.; Hatchett, S. P.; Remington, B. A.; Park, H. S.; Springer, P.; Koch, J. A.; Landen, O. L.; Seely, John; Holland, Glenn; Hudson, Larry

    2008-10-15

    We present scaled demonstrations of backlighter sources, emitting bremsstrahlung x rays with photon energies above 75 keV, that we will use to record x-ray Compton radiographic snapshots of cold dense DT fuel in inertial confinement fusion implosions at the National Ignition Facility (NIF). In experiments performed at the Titan laser facility at Lawrence Livermore National Laboratory, we measured the source size and the bremsstrahlung spectrum as a function of laser intensity and pulse length from solid targets irradiated at 2x10{sup 17}-5x10{sup 18} W/cm{sup 2} using 2-40 ps pulses. Using Au planar foils we achieved source sizes down to 5.5 {mu}m and conversion efficiencies of about 1x10{sup -13} J/J into x-ray photons with energies in the 75-100 keV spectral range. We can now use these results to design NIF backlighter targets and shielding and to predict Compton radiography performance as a function of the NIF implosion yield and associated background.

  13. Development of backlighting sources for a Compton radiography diagnostic of Inertial Confinement Fusion targets

    SciTech Connect

    Tommasini, R; MacPhee, A; Hey, D; Ma, T; Chen, C; Izumi, N; Unites, W; MacKinnon, A; Hatchett, S P; Remington, B A; Park, H S; Springer, P; Koch, J A; Landen, O L; Seely, J; Holland, G; Hudson, L

    2008-05-07

    We present scaled demonstrations of backlighter sources, emitting Bremsstrahlung x-rays with photon energies above 75 keV, that we will use to record x-ray Compton radiographic snapshots of cold dense DT fuel in inertial confinement fusion implosions at the National Ignition Facility (NIF). In experiments performed at the Titan laser facility at Lawrence Livermore National Laboratory, we measured the source size and the Bremsstrahlung spectrum as a function of laser intensity and pulse length, from solid targets irradiated at 2e17-5e18 W/cm{sup 2} using 2-40 ps pulses. Using Au planar foils we achieved source sizes down to 5.5 {micro}m, and conversion efficiencies of about 1e-3 J/J into x-ray photons with energies in the 75-100 keV spectral range. We can now use these results to design NIF backlighter targets and shielding, and to predict Compton radiography performance as a function of the NIF implosion yield and associated background.

  14. Projection radiography of the clavicle: still recommendable for forensic age diagnostics in living individuals?

    PubMed

    Wittschieber, Daniel; Ottow, Christian; Vieth, Volker; Küppers, Martin; Schulz, Ronald; Hassu, Juan; Bajanowski, Thomas; Püschel, Klaus; Ramsthaler, Frank; Pfeiffer, Heidi; Schmidt, Sven; Schmeling, Andreas

    2015-01-01

    As superimposition effects often impede the evaluation of the ossification status of the medial clavicular epiphysis in standard posterior-anterior (PA) radiographs, additional oblique images (right anterior oblique, RAO, and left anterior oblique, LAO) are currently recommended to allow for reliable stage assessments. The present study examines the influence of the radiographic projection type on stage determination. To this end, 836 sternoclavicular joints were prospectively obtained during forensic autopsies of bodies aged between 15 and 30 years. Subsequently, three different radiographs (PA, RAO, and LAO) were taken from each specimen and separately evaluated as to the developmental stage of the medial clavicular epiphysis. A forensically established five-stage classification system was used. In 25 % of the cases, the medial clavicular epiphysis depicted in an oblique projection showed a different ossification stage than in the PA projection. In at least 10 % of the cases, a higher ossification stage was observed which would have significant disadvantages in criminal proceedings (ethically unacceptable error). In conclusion, the usage of the current radiographic reference data, which rely upon chest radiographs taken as PA projections, appears to be inadmissible for oblique projections. Projection radiography of the clavicle can therefore no longer be recommended for forensic age estimation practice. As to the question of whether an individual has achieved the age of 18 or 21, computed tomography of the clavicle must be regarded as the exclusive method of choice.

  15. Real-Time X-ray Radiography Diagnostics of Components in Solid Rocket Motors

    NASA Technical Reports Server (NTRS)

    Cortopassi, A. C.; Martin, H. T.; Boyer, E.; Kuo, K. K.

    2012-01-01

    the recession of the solid propellant grain can drastically alter the flow-field and effect the recession of internal insulation and nozzle materials. Simultaneous measurement of the overall erosion rate, the development of the char layer, and the recession of the char-virgin interface during the motor operation can be rather difficult. While invasive techniques have been used with limited success, they have serious drawbacks. Break wires or make wire sensors can be installed into a sufficient number of locations in the charring material from which a time history of the charring surface can be deduced. These sensors fundamentally alter the local structure of the material in which they are imbedded. Also, the location of these sensors within the material is not known precisely without the use of an X-ray. To determine instantaneous recession rates, real-time X-ray radiography (X-ray RTR) has been utilized in several SRM experiments at PSU. The X-ray RTR system discussed in this paper consists of an X-ray source, X-ray image intensifier, and CCD camera connected to a capture computer. The system has been used to examine the ablation process of internal insulation as well as nozzle material erosion in a subscale SRM. The X-ray source is rated to 320 kV at 10 mA and has both a large (5.5 mm) and small (3.0 mm) focal spot. The lead-lined cesium iodide X-ray image intensifier produces an image which is captured by a CCD camera with a 1,000 x 1,000 pixel resolution. To produce accurate imagery of the object of interest, the alignment of the X-ray source to the X-ray image intensifier is crucial. The image sequences captured during the operation of an SRM are then processed to enhance the quality of the images. This procedure allows for computer software to extract data on the total erosion rate and the char layer thickness. Figure 1 Error! Reference source not found.shows a sequence of images captured during the operation the subscale SRM with the X-ray RTR system. The X

  16. Phase-contrast and magnification radiography at diagnostic X-ray energies using a pseudo-microfocus X-ray source

    PubMed Central

    Robson, K J

    2014-01-01

    Objective: To investigate the use of conventional diagnostic X-ray tubes for applications in which specialist microfocus sources are normally required. Methods: A conventional diagnostic X-ray tube was used in conjunction with a range of apertures to investigate improvements in spatial resolution using a line-pairs test object. Phase-contrast effects were investigated by varying source-to-object and object-to-receptor distances using a 2-French catheter as a clinically realistic test object. Results: For magnification radiography using a computed radiography receptor and conventional X-ray tube with a 1-mm nominal focus size, the limiting spatial resolution was improved from 3.55 line-pairs per millimetre, for a conventional contact image, to 5.6 line-pairs per millimetre, for a ×2 magnified view with a 250-µm aperture. For inline phase-contrast radiography, phase contrast enhancement of a 2-French catheter was demonstrated, and the expected trends with variations in source-to-object and object-to-receptor distances were found. Images of a neonatal phantom demonstrated a subtle improvement in visibility of a superimposed 1-French catheter simulating a percutaneously inserted central catheter for no increase in patient radiation dose. Conclusion: Spatial resolution improvement and visible phase contrast can be produced in clinically relevant objects using a pseudo-microfocus geometry at X-ray energies in the normal diagnostic range, using conventional diagnostic X-ray tubes and image receptors. The disadvantages of the proposal are the large distances required to produce phase contrast and limitations imposed by the resulting tube loading. Advances in knowledge: It is possible to use conventional diagnostic X-ray equipment in applications that normally require microfocus X-ray sources. This presents some possibilities for clinical applications. PMID:24779409

  17. Neutron imaging and tomography with Medipix2 and dental micro-roentgenography

    NASA Astrophysics Data System (ADS)

    Jakubek, J.; Granja, C.; Holy, T.; Lehmann, E.; Linhart, V.; Pospisil, S.; Rypar, V.; Uher, J.; Vacik, J.; Vavrik, D.; Vykydal, Z.; Cevallos, M.

    2006-12-01

    The position-sensitive semiconductor Medipix2 detector has been adapted for high-resolution dental X-ray and neutron imaging. As a fully electronic, low-dose and high spatial resolution digital dental-imaging device the system aims to observe the bone-to-implant tissue of order of tens of microns. Neutron radiography is proposed as a complementary diagnostic method to standard X-ray radiography as it can produce contrast images of materials which are otherwise indistinguishable in X-ray images. Neutron radiography and tomography tests have been carried out. Results are compared with other techniques. A review of recent developments and current status is presented.

  18. Strategic Shift to a Diagnostic Model of Care in a Multi-Site Group Dental Practice

    PubMed Central

    Kalenderian, E; Maramaldi, P; Kim, S; Etolue, J; McClellan, L; Simmons, K; Yansane, A; White, JM; Walji, MF; Ramoni, RB

    2016-01-01

    Background Documenting standardized dental diagnostic terms represents an emerging change for how dentistry is practiced. We focused on a mid-sized dental group practice as it shifted to a policy of documenting patients’ diagnoses using standardized terms in the electronic health record. Methods Kotter’s change framework was translated into interview questions posed to the senior leadership in a mid-size dental group practice. In addition, quantitative content analyses were conducted on the written policies and forms before and after the implementation of standardized diagnosis documentation to assess the extent to which the forms and policies reflected the shift. Three reviewers analyzed the data individually and reached consensuses where needed. Results Kotter’s guiding change framework explained the steps taken to 97 percent utilization rate of the Electronic Health Record and Dental Diagnostic Code. Of the 96 documents included in the forms and policy analysis, 31 documents were officially updated but only two added a diagnostic element. Conclusion Change strategies established in the business literature hold utility for dental practices seeking diagnosis-centered care. Practical Implications A practice that shifts to a diagnosis-driven care philosophy would be best served by ensuring that the change process follows a leadership framework that is calibrated to the organization’s culture. PMID:28042605

  19. Does use of an electronic health record with dental diagnostic system terminology promote dental students' critical thinking?

    PubMed

    Reed, Susan G; Adibi, Shawn S; Coover, Mullen; Gellin, Robert G; Wahlquist, Amy E; AbdulRahiman, Anitha; Hamil, Lindsey H; Walji, Muhammad F; O'Neill, Paula; Kalenderian, Elsbeth

    2015-06-01

    The Consortium for Oral Health Research and Informatics (COHRI) is leading the way in use of the Dental Diagnostic System (DDS) terminology in the axiUm electronic health record (EHR). This collaborative pilot study had two aims: 1) to investigate whether use of the DDS terms positively impacted predoctoral dental students' critical thinking skills measured by the Health Sciences Reasoning Test (HSRT), and 2) to refine study protocols. The study design was a natural experiment with cross-sectional data collection using the HSRT for 15 classes (2013-17) of students at three dental schools. Characteristics of students who had been exposed to the DDS terms were compared with students who had not, and the differences were tested by t-tests or chi-square tests. Generalized linear models were used to evaluate the relationship between exposure and outcome on the overall critical thinking score. The results showed that exposure was significantly related to overall score (p=0.01), with not-exposed students having lower mean overall scores. This study thus demonstrated a positive impact of using the DDS terminology in an EHR on the critical thinking skills of predoctoral dental students in three COHRI schools as measured by their overall score on the HSRT. These preliminary findings support future research to further evaluate a proposed model of critical thinking in clinical dentistry.

  20. Using the Monte Carlo method for assessing the tissue and organ doses of patients in dental radiography

    NASA Astrophysics Data System (ADS)

    Makarevich, K. O.; Minenko, V. F.; Verenich, K. A.; Kuten, S. A.

    2016-05-01

    This work is dedicated to modeling dental radiographic examinations to assess the absorbed doses of patients and effective doses. For simulating X-ray spectra, the TASMIP empirical model is used. Doses are assessed on the basis of the Monte Carlo method by using MCNP code for voxel phantoms of ICRP. The results of the assessment of doses to individual organs and effective doses for different types of dental examinations and features of X-ray tube are presented.

  1. The value of high resolution computed tomography in the diagnostics of small opacities and complications of silicosis in mine machinery manufacturing workers, compared to radiography.

    PubMed

    Sun, Jinkai; Weng, Dong; Jin, Changshan; Yan, Bo; Xu, Guihua; Jin, Bo; Xia, Shenning; Chen, Jie

    2008-01-01

    The purpose of this study was to assess the value and usefulness of high resolution computed tomography (HRCT) in the diagnostics of small opacities and complications of silicosis in mine machinery manufacturing workers, compared to conventional radiograms. The diagnosis of silicosis is mainly based on the radiological findings of workers exposed to the dust causing lung fibrosis. However, on radiograms many parenchymal structures overlap, which limits the sensitivity and specificity of the method. Difficulties in accurate interpretation of conventional radiograms in silicosis also result from their relatively low resolution. We randomly selected 30 I period silicosis patients from 77 I period silicosis patients working at a mine machinery manufacturing company. Out of 1078 non-silicosis and 162 0+ period silicosis subjects, 30 non-silicosis and 30 0+ period silicosis subjects were randomly selected and matched with the 30 I period silicosis subjects by age (+/- 3.0 yr) and occupational exposure time (+/- 2.0 yr). Chest X-rays were taken at maximal inspiration. For the HRCT examination, the GE Somatom plus apparatus was used. Eight, five and six subjects were respectively diagnosed as 0+, I or I+ period silicosis based on HRCT among 90 subjects whose original diagnoses were non-silicosis, 0+ or I period silicosis based on radiography. The numbers of small opacities in HRCT scans were significantly higher than those seen in radiography in all lung zones (p<0.01). HRCT was more sensitive than radiography in detecting small opacities of mid-out zones of the lung, but no statistical significance was found between the two methods in the detection of small opacities of lower zones of the lung. A statistically significant increase in the detectability of bulla, emphysema, pleural, mediastinal and hilar changes was observed (p<0.05). HRCT might be more sensitive than radiography in detecting lung parenchymal changes suggestive of silicosis.

  2. Dental diagnostic radiology in the forensic sciences: two case presentations.

    PubMed

    Nicopoulou-Karayianni, K; Mitsea, A G; Horner, K

    2007-06-01

    Dentomaxillofacial radiology is a useful tool in forensic science to reveal characteristics of the structures of the dentomaxillofacial region. Postmortem radiographs are valuable to the forensic odontologist for comparison with antemortem radiographs, which are the most consistent part of the antemortem records that can be transmitted during forensic examination procedures. By using dentomaxillofacial radiology we can, therefore, give answers to problems dealing with identification cases, mass disasters and dental age estimation. We present the contribution of dentomaxillofacial radiology to the forensic sciences through two cases of deceased persons, where identification was based on information provided by radiographs. The right performance, interpretation and reportage of dentomaxillofacial radiological examination and procedures can be extremely valuable in solving forensic problems.

  3. Cone-beam computed tomography versus digital periapical radiography in the detection of artificially created periapical lesions: A pilot study of the diagnostic accuracy of endodontists using both techniques

    PubMed Central

    Campello, Andrea Fagundes; Gonçalves, Lucio Souza; Guedes, Fábio Ribeiro

    2017-01-01

    Purpose The aim of this study was to compare the diagnostic accuracy of previously trained endodontists in the detection of artificially created periapical lesions using cone-beam computed tomography (CBCT) and digital periapical radiography (DPR). Materials and Methods An ex vivo model using dry skulls was used, in which simulated apical lesions were created and then progressively enlarged using #1/2, #2, #4, and #6 round burs. A total of 11 teeth were included in the study, and 110 images were obtained with CBCT and with an intraoral digital periapical radiographic sensor (Instrumentarium dental, Tuusula, Finland) initially and after each bur was used. Specificity and sensitivity were calculated. All images were evaluated by 10 previously trained, certified endodontists. Agreement was calculated using the kappa coefficient. The accuracy of each method in detecting apical lesions was calculated using the chi-square test. Results The kappa coefficient between examiners showed low agreement (range, 0.17-0.64). No statistical difference was found between CBCT and DPR in teeth without apical lesions (P=.15). The accuracy for CBCT was significantly higher than for DPR in all corresponding simulated lesions (P<.001). The correct diagnostic rate for CBCT ranged between 56.9% and 73.6%. The greatest difference between CBCT and DPR was seen in the maxillary teeth (CBCT, 71.4%; DPR, 28.6%; P<.01) and multi-rooted teeth (CBCT, 83.3%; DPR, 33.3%; P<.01). Conclusion CBCT allowed higher accuracy than DPR in detecting simulated lesions for all simulated lesions tested. Endodontists need to be properly trained in interpreting CBCT scans to achieve higher diagnostic accuracy. PMID:28361026

  4. Evaluation of different Diagnostic Modalities for Diagnosis of Dental Caries: An in vivo Study

    PubMed Central

    Somani, Rani; Jaidka, Shipra; Nishad, Muhamad; Singh, Shikha; Tomar, Divya

    2016-01-01

    Aim The aim of this study was to compare and evaluate the efficacy of different diagnostic aids for diagnosis of dental caries and to compare the validity in terms of sensitivity and specificity of all four diagnostic modalities for diagnosis of caries. Materials and methods Occlusal surfaces of 100 primary and permanent molars were examined using the four diagnostic systems (visual, intraoral camera, DIAGNOdent, and DIAGNOdent with dye). These results were compared with operative intervention gold standard. Sensitivity and specificity were calculated for each diagnostic system for both enamel and dentin caries. Interrater agreement was calculated for each diagnostic system using kappa statistics. Results For both enamel and dentin caries, the highest sensitivity values were provided by DIAGNOdent (0.91 and 0.72) and lowest for visual examination on wet surface (0.60 and 0.50). For both enamel and dentin caries, the specificity was found to be highest for intraoral camera on dry surface and lowest for visual examination. The DIAGNOdent gave the highest value of interrater agreement (kappa), i.e., 0.816 as compared with 0.03 for visual examination. Conclusion The study clearly demonstrated that DIAGNO-dent was the most accurate and valid system tested for the detection of occlusal caries. It has the advantage of quantifying the mineral content, helping to improve the diagnostic efficacy and treatment and accurate assessment of fissures where the visual examination alone is not adequate, thus complementing the traditional dental examination. How to cite this article Zaidi I, Somani R, Jaidka S, Nishad M, Singh S, Tomar D. Evaluation of different Diagnostic Modalities for Diagnosis of Dental Caries: An in vivo Study. Int J Clin Pediatr Dent 2016;9(4):320-325. PMID:28127163

  5. Assessment of digital panoramic radiography's diagnostic value in angular bony lesions with 5 mm or deeper pocket depth in mandibular molars

    PubMed Central

    Saberi, Bardia Vadiati; Nemati, Somayeh; Malekzadeh, Meisam; Javanmard, Afrooz

    2017-01-01

    Background: Assessment of alveolar bone level in periodontitis is very important in determining prognosis and treatment plan. Panoramic radiography is a diagnostic tool used to screen patients. The aim of the present study was to assess the diagnostic value of digital panoramic radiography in angular bony defects with 5 mm or deeper pocket depth in mandibular molars. Materials and Methods: In this cross-sectional study, ninety angular bony defects in mandibular molars teeth with 5 mm or deeper pocket depth were selected in sixty patients with the diagnosis of chronic periodontitis. Before surgery, bone probing was performed. During the surgery, the vertical distance from cementoenamel junction to the most apical part of bony defect was measured using a Williams probe and this measurements were employed as gold standard. This distance was measured on the panoramic radiographs by a Digital Calliper and Digital Ruler. All data were compare dusing independent samples t-test and Pearson's correlation coefficient. Results: No significant difference was found between the results of bone probing and intra-surgical measurements (P = 0.377). The mean defect depth determined by Digital Caliper and Digital Ruler on panoramic radiographs was significantly less than surgical measurements (P < 0.001). The correlation between bone probing and surgical measurements in determining the defect depth was strong (r = 0.98, P < 0.001). Radiographic measurements made by Digital Ruler (r = 0.86), comparing to Digital Caliper (r = 0.79), showed a higher degree of correlation with surgical measurements. Conclusion: Based on this study, bone probing is a reliable method in vertical alveolar bone defect measurements. While the information obtained from digital panoramic radiographs should be used with caution and the ability of digital panoramic radiography in the determination of defect depth is limited. PMID:28348615

  6. Conventional radiography and cross-sectional imaging when planning dental implants in the anterior edentulous mandible to support an overdenture: a systematic review.

    PubMed

    Shelley, A M; Glenny, A-M; Goodwin, M; Brunton, P; Horner, K

    2014-01-01

    The objectives for this systematic review were to determine if the pre-operative availability of cross-sectional imaging, such as cone beam CT, has a diagnostic impact, therapeutic impact or impact on patients' outcome when placing two dental implants in the anterior mandible to support an overdenture. The Cochrane Oral Health Group's Trials Register (CENTRAL), MEDLINE® and Embase were searched up to, and including, February 2013. Studies were considered eligible for inclusion if they compared the impact of conventional and cross-sectional imaging when placing dental implants in sites including the anterior mandible. An adapted quality assessment tool was used for the assessment of the risk of bias in included studies. Pooled quantitative analysis was not possible and, therefore, synthesis was qualitative. Of 2374 potentially eligible papers, 5 studies were included. Little can be determined from a synthesis of these studies because of their small number, clinical diversity and high risks of bias. Notwithstanding, it may be tentatively inferred that cross-sectional imaging has a therapeutic impact in the more challenging cases. In terms of impact, this review has found no evidence to support any specific imaging modality when planning dental implant placement in any region of the mouth. Therefore, those who argue that cross-sectional imaging should be used for the assessment of all dental implant sites are unsupported by evidence.

  7. Diagnostic performance of dental maturity for identification of skeletal maturation phase.

    PubMed

    Perinetti, G; Contardo, L; Gabrieli, P; Baccetti, T; Di Lenarda, R

    2012-08-01

    The objective of this study is to analyse the diagnostic performance of the circumpubertal dental maturation phases for the identification of individual-specific skeletal maturation phases. A total of 354 healthy subjects, 208 females and 146 males (mean age, 11.1 ± 2.4 years; range, 6.8-17.1 years), were enrolled in the study. Dental maturity was assessed through the calcification stages from panoramic radiographs of the mandibular canine, the first and second premolars, and the second molar. Determination of skeletal maturity was according to the cervical vertebra maturation (CVM) method on lateral cephalograms. Diagnostic performances were evaluated according to the dental maturation stages for each tooth for the identification of the CVM stages and growth phases (as pre-pubertal, pubertal, and post-pubertal) using positive likelihood ratios (LHRs). A positive LHR threshold of 10 or more was considered for satisfactory reliability of any dental maturation stage for the identification of any of the CVM stages or growth phases. The positive LHRs were generally less than 2.0, with a few exceptions. These four teeth showed positive LHRs greater than 10 only for the identification of the pre-pubertal growth phase, with values from 10.8 for the second molar (stage E) to 39.3 for the first premolar (stage E). Dental maturation assessment is only useful for diagnosis of the pre-pubertal growth phase, and thus, precise information in relation to the timing of the onset of the growth spurt is not provided by these indices.

  8. Radiation absorbed from dental implant radiography: a comparison of linear tomography, CT scan, and panoramic and intra-oral techniques

    SciTech Connect

    Clark, D.E.; Danforth, R.A.; Barnes, R.W.; Burtch, M.L. )

    1990-01-01

    Absorbed radiation dose in bone marrow, thyroid, salivary gland, eye, and skin entrance was determined by placement of lithium fluoride thermoluminescent dosimeters (TLD's) at selected anatomical sites within and on a human-like x-ray phantom. The phantom was exposed to radiation from linear tomographic and computer-assisted tomographic (CT) simulated dental implant radiographic examinations. The mean dose was determined for each anatomical site. Resulting dose measurements from linear tomography and computer-assisted tomography are compared with reported panoramic and intra-oral doses. CT examination delivered the greatest dose, while linear tomography was generally lowest. Panoramic and intra-oral doses were similar to those of linear tomography.

  9. Accuracy of direct digital radiography for detecting occlusal caries in primary teeth compared with conventional radiography and visual inspection: an in vitro study

    PubMed Central

    Dias da Silva, P R; Martins Marques, M; Steagall, W; Medeiros Mendes, F; Lascala, C A

    2010-01-01

    Objectives The diagnosis of caries lesions is still a matter of concern in dentistry. The diagnosis of dental caries by digital radiography has a number of advantages over conventional radiography; however, this method has not been explored fully in the field of paediatric dentistry. This in vitro research evaluated the accuracy of direct digital radiography compared with visual inspection and conventional radiography in the diagnosis of occlusal caries lesions in primary molars. Methods 50 molars were selected and evaluated under standardized conditions by 2 previously calibrated examiners according to 3 diagnostic methods (visual inspection, conventional radiography and direct digital radiography). Direct digital radiographs were obtained with the Dixi3 system (Planmeca, Helsinki, Finland) and the conventional radiographs with InSight film (Kodak Eastman Co., Rochester, NY). The images were scored and a reference standard was obtained histologically. The interexaminer reliability was calculated using Cohen's kappa test and the specificity, sensitivity and accuracy of the methods were calculated. Results Examiner reliability was good. For lesions limited to the enamel, visual inspection showed significantly higher sensitivity and accuracy than both radiographic methods, but no significant difference was found in specificity. For teeth with dentinal caries, no significant differences were found for any parameter when comparing visual and radiographic evaluation. Conclusions Although less accurate than the visual method for detecting caries lesions confined to the enamel, the direct digital radiographic method is as effective as conventional radiographic examination and visual inspection of primary teeth with occlusal caries when the dentine is involved. PMID:20729186

  10. Automated chest-radiography as a triage for Xpert testing in resource-constrained settings: a prospective study of diagnostic accuracy and costs

    NASA Astrophysics Data System (ADS)

    Philipsen, R. H. H. M.; Sánchez, C. I.; Maduskar, P.; Melendez, J.; Peters-Bax, L.; Peter, J. G.; Dawson, R.; Theron, G.; Dheda, K.; van Ginneken, B.

    2015-07-01

    Molecular tests hold great potential for tuberculosis (TB) diagnosis, but are costly, time consuming, and HIV-infected patients are often sputum scarce. Therefore, alternative approaches are needed. We evaluated automated digital chest radiography (ACR) as a rapid and cheap pre-screen test prior to Xpert MTB/RIF (Xpert). 388 suspected TB subjects underwent chest radiography, Xpert and sputum culture testing. Radiographs were analysed by computer software (CAD4TB) and specialist readers, and abnormality scores were allocated. A triage algorithm was simulated in which subjects with a score above a threshold underwent Xpert. We computed sensitivity, specificity, cost per screened subject (CSS), cost per notified TB case (CNTBC) and throughput for different diagnostic thresholds. 18.3% of subjects had culture positive TB. For Xpert alone, sensitivity was 78.9%, specificity 98.1%, CSS $13.09 and CNTBC $90.70. In a pre-screening setting where 40% of subjects would undergo Xpert, CSS decreased to $6.72 and CNTBC to $54.34, with eight TB cases missed and throughput increased from 45 to 113 patients/day. Specialists, on average, read 57% of radiographs as abnormal, reducing CSS ($8.95) and CNTBC ($64.84). ACR pre-screening could substantially reduce costs, and increase daily throughput with few TB cases missed. These data inform public health policy in resource-constrained settings.

  11. Polarization sensitive camera for the in vitro diagnostic and monitoring of dental erosion

    NASA Astrophysics Data System (ADS)

    Bossen, Anke; Rakhmatullina, Ekaterina; Lussi, Adrian; Meier, Christoph

    Due to a frequent consumption of acidic food and beverages, the prevalence of dental erosion increases worldwide. In an initial erosion stage, the hard dental tissue is softened due to acidic demineralization. As erosion progresses, a gradual tissue wear occurs resulting in thinning of the enamel. Complete loss of the enamel tissue can be observed in severe clinical cases. Therefore, it is essential to provide a diagnosis tool for an accurate detection and monitoring of dental erosion already at early stages. In this manuscript, we present the development of a polarization sensitive imaging camera for the visualization and quantification of dental erosion. The system consists of two CMOS cameras mounted on two sides of a polarizing beamsplitter. A horizontal linearly polarized light source is positioned orthogonal to the camera to ensure an incidence illumination and detection angles of 45°. The specular reflected light from the enamel surface is collected with an objective lens mounted on the beam splitter and divided into horizontal (H) and vertical (V) components on each associate camera. Images of non-eroded and eroded enamel surfaces at different erosion degrees were recorded and assessed with diagnostic software. The software was designed to generate and display two types of images: distribution of the reflection intensity (V) and a polarization ratio (H-V)/(H+V) throughout the analyzed tissue area. The measurements and visualization of these two optical parameters, i.e. specular reflection intensity and the polarization ratio, allowed detection and quantification of enamel erosion at early stages in vitro.

  12. Suresh K. AggarwalQuantified Analysis of a Production Diesel Injector Using X-Ray Radiography and Engine Diagnostics

    NASA Astrophysics Data System (ADS)

    Ramirez, Anita I.

    The work presented in this thesis pursues further the understanding of fuel spray, combustion, performance, and emissions in an internal combustion engine. Various experimental techniques including x-ray radiography, injection rate measurement, and in-cylinder endoscopy are employed in this work to characterize the effects of various upstream conditions such as injection rate profile and fuel physical properties. A single non-evaporating spray from a 6-hole full-production Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) nozzle is studied under engine-like ambient densities with x-ray radiography at the Advanced Photon Source (APS) of Argonne National Laboratory (ANL). Two different injection pressures were investigated and parameters such as fuel mass distribution, spray penetration, cone angle, and spray velocity were obtained. The data acquired with x-ray radiography is used for the development and validation of improved Computational Fluid Dynamic (CFD) models. Rate of injection is studied using the same HEUI in a single cylinder Caterpillar test engine. The injection rate profile is altered to have three levels of initial injection pressure rise. Combustion behavior, engine performance, and emissions information was acquired for three rate profile variations. It is found that NOx emission reduction is achieved when the SOI timing is constant at the penalty of lower power generated in the cycle. However, if CA50 is aligned amongst the three profiles, the NOx emissions and power are constant with a slight penalty in CO emissions. The influence of physical and chemical parameters of fuel is examined in a study of the heavy alcohol, phytol (C20H40O), in internal combustion engine application. Phytol is blended with diesel in 5%, 10%, and 20% by volume. Combustion behavior is similar between pure diesel and the phytol/diesel blends with small differences noted in peak cylinder pressure, ignition delay, and heat release rate in the premix burn

  13. Diagnostic methods for assessing maxillary skeletal and dental transverse deficiencies: A systematic review

    PubMed Central

    Sawchuk, Dena; Currie, Kris; Vich, Manuel Lagravere; Palomo, Juan Martin

    2016-01-01

    Objective To evaluate the accuracy and reliability of the diagnostic tools available for assessing maxillary transverse deficiencies. Methods An electronic search of three databases was performed from their date of establishment to April 2015, with manual searching of reference lists of relevant articles. Articles were considered for inclusion if they reported the accuracy or reliability of a diagnostic method or evaluation technique for maxillary transverse dimensions in mixed or permanent dentitions. Risk of bias was assessed in the included articles, using the Quality Assessment of Diagnostic Accuracy Studies tool-2. Results Nine articles were selected. The studies were heterogeneous, with moderate to low methodological quality, and all had a high risk of bias. Four suggested that the use of arch width prediction indices with dental cast measurements is unreliable for use in diagnosis. Frontal cephalograms derived from cone-beam computed tomography (CBCT) images were reportedly more reliable for assessing intermaxillary transverse discrepancies than posteroanterior cephalograms. Two studies proposed new three-dimensional transverse analyses with CBCT images that were reportedly reliable, but have not been validated for clinical sensitivity or specificity. No studies reported sensitivity, specificity, positive or negative predictive values or likelihood ratios, or ROC curves of the methods for the diagnosis of transverse deficiencies. Conclusions Current evidence does not enable solid conclusions to be drawn, owing to a lack of reliable high quality diagnostic studies evaluating maxillary transverse deficiencies. CBCT images are reportedly more reliable for diagnosis, but further validation is required to confirm CBCT's accuracy and diagnostic superiority. PMID:27668196

  14. Image post-processing in dental practice.

    PubMed

    Gormez, Ozlem; Yilmaz, Hasan Huseyin

    2009-10-01

    Image post-processing of dental digital radiographs, a function which used commonly in dental practice is presented in this article. Digital radiography has been available in dentistry for more than 25 years and its use by dental practitioners is steadily increasing. Digital acquisition of radiographs enables computer-based image post-processing to enhance image quality and increase the accuracy of interpretation. Image post-processing applications can easily be practiced in dental office by a computer and image processing programs. In this article, image post-processing operations such as image restoration, image enhancement, image analysis, image synthesis, and image compression, and their diagnostic efficacy is described. In addition this article provides general dental practitioners with a broad overview of the benefits of the different image post-processing operations to help them understand the role of that the technology can play in their practices.

  15. Accuracy of cone beam dental CT, intraoral digital and conventional film radiography for the detection of periapical lesions. An ex vivo study in pig jaws.

    PubMed

    Stavropoulos, Andreas; Wenzel, Ann

    2007-03-01

    To compare the accuracy of cone beam CT scanning (NewTom 3G) with intraoral periapical radiography (Dixi2, Planmeca CCD sensor and Insight film) for the detection of periapical bone defects. Ten frozen pig mandibles were used. All soft tissues were removed and the jaws were sagittally sectioned to obtain three blocks from each side of the jaw containing the premolars and the molars with surrounding jaw bone. All teeth with intact roots were then "extracted". First, 15 blocks were used to define defect size and exposure parameters; then, the remaining 45 blocks were divided into three equal groups. In one group, cylindrical defects of 1 x 1 mm were prepared beyond the apices of the extraction sockets, in another group defects of 2 x 2 mm were similarly prepared, while no defects were prepared in the last group. The teeth were replaced into their sockets and digital and conventional radiographs of all blocks were taken under reproducible conditions. In addition, all blocks were CT scanned with the same volumetric data and then reconstructed to provide sagittal and coronal 2-D sections. Masked evaluation of the images (defect present vs no defect) was performed by four calibrated examiners. Statistical analysis was performed with ANOVA and the significance level was set to P < 0.05. NewTom 3G was statistically significantly better in terms of sensitivity (54%), positive (82.6%) and negative (44.5%) predictive values, and diagnostic accuracy (61%) when compared with digital radiographs (23%, 60%, 31%, 39%), and with conventional ones (28%, 70%, 35%, 44%)-except in the positive predictive value. Specificity was similar for all three methods. No difference was observed between the two periapical (digital vs conventional) radiographs. NewTom 3G may be useful in cases of immediate implants intended to replace teeth with suspicion for possible existing endodontic pathology, or in candidate implant sites neighboring such teeth.

  16. Impact of iterative metal artifact reduction on diagnostic image quality in patients with dental hardware.

    PubMed

    Weiß, Jakob; Schabel, Christoph; Bongers, Malte; Raupach, Rainer; Clasen, Stephan; Notohamiprodjo, Mike; Nikolaou, Konstantin; Bamberg, Fabian

    2017-03-01

    Background Metal artifacts often impair diagnostic accuracy in computed tomography (CT) imaging. Therefore, effective and workflow implemented metal artifact reduction algorithms are crucial to gain higher diagnostic image quality in patients with metallic hardware. Purpose To assess the clinical performance of a novel iterative metal artifact reduction (iMAR) algorithm for CT in patients with dental fillings. Material and Methods Thirty consecutive patients scheduled for CT imaging and dental fillings were included in the analysis. All patients underwent CT imaging using a second generation dual-source CT scanner (120 kV single-energy; 100/Sn140 kV in dual-energy, 219 mAs, gantry rotation time 0.28-1/s, collimation 0.6 mm) as part of their clinical work-up. Post-processing included standard kernel (B49) and an iterative MAR algorithm. Image quality and diagnostic value were assessed qualitatively (Likert scale) and quantitatively (HU ± SD) by two reviewers independently. Results All 30 patients were included in the analysis, with equal reconstruction times for iMAR and standard reconstruction (17 s ± 0.5 vs. 19 s ± 0.5; P > 0.05). Visual image quality was significantly higher for iMAR as compared with standard reconstruction (3.8 ± 0.5 vs. 2.6 ± 0.5; P < 0.0001, respectively) and showed improved evaluation of adjacent anatomical structures. Similarly, HU-based measurements of degree of artifacts were significantly lower in the iMAR reconstructions as compared with the standard reconstruction (0.9 ± 1.6 vs. -20 ± 47; P < 0.05, respectively). Conclusion The tested iterative, raw-data based reconstruction MAR algorithm allows for a significant reduction of metal artifacts and improved evaluation of adjacent anatomical structures in the head and neck area in patients with dental hardware.

  17. Diagnostic accuracy of chest radiography for the diagnosis of tuberculosis (TB) and its role in the detection of latent TB infection: a systematic review.

    PubMed

    Piccazzo, Riccardo; Paparo, Francesco; Garlaschi, Giacomo

    2014-05-01

    In this systematic review we evaluate the role of chest radiography (CXR) in the diagnostic flow chart for tuberculosis (TB) infection, focusing on latent TB infection (LTBI) in patients requiring medical treatment with biological drugs. In recent findings, patients scheduled for immunomodulatory therapy with biologic drugs are a group at risk of TB reactivation and, in such patients, detection of LTBI is of great importance. CXR for diagnosis of pulmonary TB has good sensitivity, but poor specificity. Radiographic diagnosis of active disease can only be reliably made on the basis of temporal evolution of pulmonary lesions. In vivo tuberculin skin test and ex vivo interferon-γ release assays are designed to identify development of an adaptive immune response, but not necessarily LTBI. Computed tomography (CT) is able to distinguish active from inactive disease. CT is considered a complementary imaging modality to CXR in the screening procedure to detect past and LTBI infection in specific subgroups of patients who have increased risk for TB reactivation, including those scheduled for medical treatment with biological drugs.

  18. Radiological protection in equine radiography and radiotherapy.

    PubMed

    Yoxall, A T

    1977-10-01

    The principles of radiological protection are summarised and consideration is then given to problems, which may confront the equine practitioner, in the fulfillment of these principles during diagnostic radiography of the limbs, head, and spine of the horse. The place of anaesthesia in such procedures is discussed and the special problems associated with therapeutic radiography of the horse are considered.

  19. Apparatus for proton radiography

    DOEpatents

    Martin, Ronald L.

    1976-01-01

    An apparatus for effecting diagnostic proton radiography of patients in hospitals comprises a source of negative hydrogen ions, a synchrotron for accelerating the negative hydrogen ions to a predetermined energy, a plurality of stations for stripping extraction of a radiography beam of protons, means for sweeping the extracted beam to cover a target, and means for measuring the residual range, residual energy, or percentage transmission of protons that pass through the target. The combination of information identifying the position of the beam with information about particles traversing the subject and the back absorber is performed with the aid of a computer to provide a proton radiograph of the subject. In an alternate embodiment of the invention, a back absorber comprises a plurality of scintillators which are coupled to detectors.

  20. Evaluation of a Computer-Assisted Dental Diagnostic System by Navy Hospital Corpsmen

    DTIC Science & Technology

    1989-06-23

    computer-assisted dental program valuable to the diagnosis and management of patients with dental pain . They would use the dental program in their...A computer-assisted dental program to assist independent duty corpsmen in the diagnosis and management of patients who are present at sea with dental ... pain produced diagnosis which were exact or logically consistent with the diagnosis made by the dentists 83% of the time. The corpsmen found the

  1. Improved Diagnostics by Assessing the Micromorphology of Breast Calcifications via X-Ray Dark-Field Radiography

    NASA Astrophysics Data System (ADS)

    Scherer, Kai; Braig, Eva; Ehn, Sebastian; Schock, Jonathan; Wolf, Johannes; Birnbacher, Lorenz; Chabior, Michael; Herzen, Julia; Mayr, Doris; Grandl, Susanne; Sztrókay-Gaul, Anikó; Hellerhoff, Karin; Pfeiffer, Franz

    2016-11-01

    Breast microcalcifications play an essential role in the detection and evaluation of early breast cancer in clinical diagnostics. However, in digital mammography, microcalcifications are merely graded with respect to their global appearance within the mammogram, while their interior microstructure remains spatially unresolved and therefore not considered in cancer risk stratification. In this article, we exploit the sub-pixel resolution sensitivity of X-ray dark-field contrast for clinical microcalcification assessment. We demonstrate that the micromorphology, rather than chemical composition of microcalcification clusters (as hypothesised by recent literature), determines their absorption and small-angle scattering characteristics. We show that a quantitative classification of the inherent microstructure as ultra-fine, fine, pleomorphic and coarse textured is possible. Insights underlying the micromorphological nature of breast calcifications are verified by comprehensive high-resolution micro-CT measurements. We test the determined microtexture of microcalcifications as an indicator for malignancy and demonstrate its potential to improve breast cancer diagnosis, by providing a non-invasive tool for sub-resolution microcalcification assessment. Our results indicate that dark-field imaging of microcalcifications may enhance the diagnostic validity of current microcalcification analysis and reduce the number of invasive procedures.

  2. Improved Diagnostics by Assessing the Micromorphology of Breast Calcifications via X-Ray Dark-Field Radiography

    PubMed Central

    Scherer, Kai; Braig, Eva; Ehn, Sebastian; Schock, Jonathan; Wolf, Johannes; Birnbacher, Lorenz; Chabior, Michael; Herzen, Julia; Mayr, Doris; Grandl, Susanne; Sztrókay-Gaul, Anikó; Hellerhoff, Karin; Pfeiffer, Franz

    2016-01-01

    Breast microcalcifications play an essential role in the detection and evaluation of early breast cancer in clinical diagnostics. However, in digital mammography, microcalcifications are merely graded with respect to their global appearance within the mammogram, while their interior microstructure remains spatially unresolved and therefore not considered in cancer risk stratification. In this article, we exploit the sub-pixel resolution sensitivity of X-ray dark-field contrast for clinical microcalcification assessment. We demonstrate that the micromorphology, rather than chemical composition of microcalcification clusters (as hypothesised by recent literature), determines their absorption and small-angle scattering characteristics. We show that a quantitative classification of the inherent microstructure as ultra-fine, fine, pleomorphic and coarse textured is possible. Insights underlying the micromorphological nature of breast calcifications are verified by comprehensive high-resolution micro-CT measurements. We test the determined microtexture of microcalcifications as an indicator for malignancy and demonstrate its potential to improve breast cancer diagnosis, by providing a non-invasive tool for sub-resolution microcalcification assessment. Our results indicate that dark-field imaging of microcalcifications may enhance the diagnostic validity of current microcalcification analysis and reduce the number of invasive procedures. PMID:27841341

  3. Dental flossing as a diagnostic method for proximal gingivitis: a validation study.

    PubMed

    Grellmann, Alessandra Pascotini; Kantorski, Karla Zanini; Ardenghi, Thiago Machado; Moreira, Carlos Heitor Cunha; Danesi, Cristiane Cademartori; Zanatta, Fabricio Batistin

    2016-05-20

    This study evaluated the clinical diagnosis of proximal gingivitis by comparing two methods: dental flossing and the gingival bleeding index (GBI). One hundred subjects (aged at least 18 years, with 15% of positive proximal sites for GBI, without proximal attachment loss) were randomized into five evaluation protocols. Each protocol consisted of two assessments with a 10-minute interval between them: first GBI/second floss, first floss/second GBI, first GBI/second GBI, first tooth floss/second floss, and first gum floss-second floss. The dental floss was slid against the tooth surface (TF) and the gingival tissue (GF). The evaluated proximal sites should present teeth with established point of contact and probing depth ≤ 3mm. One trained and calibrated examiner performed all the assessments. The mean percentages of agreement and disagreement were calculated for the sites with gingival bleeding in both evaluation methods (GBI and flossing). The primary outcome was the percentage of disagreement between the assessments in the different protocols. The data were analyzed by one-way ANOVA, McNemar, chi-square and Tukey's post hoc tests, with a 5% significance level. When gingivitis was absent in the first assessment (negative GBI), bleeding was detected in the second assessment by TF and GF in 41.7% (p < 0.001) and 50.7% (p < 0.001) of the sites, respectively. In the absence of gingivitis in the second assessment (negative GBI), TF and GF detected bleeding in the first assessment in 38.9% (p = 0.004) and 58.3% (p < 0.001) of the sites, respectively. TF and GF appears to be a better diagnostic indicator of proximal gingivitis than GBI.

  4. Particle Beam Radiography

    NASA Astrophysics Data System (ADS)

    Peach, Ken; Ekdahl, Carl

    2014-02-01

    Particle beam radiography, which uses a variety of particle probes (neutrons, protons, electrons, gammas and potentially other particles) to study the structure of materials and objects noninvasively, is reviewed, largely from an accelerator perspective, although the use of cosmic rays (mainly muons but potentially also high-energy neutrinos) is briefly reviewed. Tomography is a form of radiography which uses multiple views to reconstruct a three-dimensional density map of an object. There is a very wide range of applications of radiography and tomography, from medicine to engineering and security, and advances in instrumentation, specifically the development of electronic detectors, allow rapid analysis of the resultant radiographs. Flash radiography is a diagnostic technique for large high-explosive-driven hydrodynamic experiments that is used at many laboratories. The bremsstrahlung radiation pulse from an intense relativistic electron beam incident onto a high-Z target is the source of these radiographs. The challenge is to provide radiation sources intense enough to penetrate hundreds of g/cm2 of material, in pulses short enough to stop the motion of high-speed hydrodynamic shocks, and with source spots small enough to resolve fine details. The challenge has been met with a wide variety of accelerator technologies, including pulsed-power-driven diodes, air-core pulsed betatrons and high-current linear induction accelerators. Accelerator technology has also evolved to accommodate the experimenters' continuing quest for multiple images in time and space. Linear induction accelerators have had a major role in these advances, especially in providing multiple-time radiographs of the largest hydrodynamic experiments.

  5. Digital Radiography

    NASA Technical Reports Server (NTRS)

    1986-01-01

    System One, a digital radiography system, incorporates a reusable image medium (RIM) which retains an image. No film is needed; the RIM is read with a laser scanner, and the information is used to produce a digital image on an image processor. The image is stored on an optical disc. System allows the radiologist to "dial away" unwanted images to compare views on three screens. It is compatible with existing equipment and cost efficient. It was commercialized by a Stanford researcher from energy selective technology developed under a NASA grant.

  6. Dental biothermophotonics: How photothermal methods are winning the race with X-rays for dental caries diagnostic needs of clinical dentistry

    NASA Astrophysics Data System (ADS)

    Mandelis, A.; Jeon, R.; Matvienko, A.; Abrams, S. H.; Amaechi, B. T.

    2008-01-01

    Recent trends in biothermophotonics of teeth are presented. The presentation is centered on the development of clinical-level frequency-domain photothermal radiometry and modulated luminescence to address issues associated with the early diagnosis of demineralization caries in human teeth. Biothermophotonic principles and applications to the detection of the carious state in human teeth as embodied by laser photothermal radiometry are presented and further supported by modulated luminescence. The emphasis is on recent developments with regard to abilities of these techniques to diagnose interproximal lesions between teeth, etching with phosphoric acid and with an artificial demineralization gel in order to simulate early demineralization, as well as demineralization and remineralization of dental crown enamel and root dentin. These are lesions which normally go undetected by X-ray radiographs. Comparisons with X rays, Micro-Computed Tomography (μ-CT) and Transverse Micro-Radiography (TMR) are discussed. A theoretical model involving coupled diffuse photon density and thermal-wave fields is developed and applied to frequency scans from demineralized artificial lesions to produce quantitative values for optical and thermophysical parameters of teeth as well as the thickness of the induced lesion.

  7. Dental anomalies in the primary dentition and their repetition in the permanent dentition: a diagnostic performance study.

    PubMed

    Marinelli, Andrea; Giuntini, Veronica; Franchi, Lorenzo; Tollaro, Isabella; Baccetti, Tiziano; Defraia, Efisio

    2012-01-01

    This study investigated the recurrence in the permanent dentition of dental anomalies of the primary dentition. A sample of 189 subjects (100 males, 89 females, mean age of 5 years and 7 months) with anomalies of primary teeth (tooth hypodontia, supernumerary teeth, geminated teeth, and fused teeth) was selected and re-analyzed at a mean age of 11 years and 2 months for the recurrence of the dental anomalies in the permanent dentition. As a control group, 271 subjects (123 males, 148 females) without dental anomalies in the primary dentition were selected. The recurrence in the permanent dentition of the dental anomalies in the primary dentition was evaluated by measures of diagnostic performance. The results showed high values for the repetition of hypodontia (positive likelihood ratio = 102.0); low score for the repetition of hyperdontia (positive likelihood ratio = 6.5); low positive likelihood ratio (9.1) for gemination of primary teeth resulting in supernumerary permanent teeth; high positive likelihood ratio (47.0) for fusion of primary teeth followed by missing permanent teeth. Dental anomalies in the primary dentition are associated with an increased likelihood of anomalies of the succedaneous permanent.

  8. Acquired Wharton's duct stenosis after dental radiographs treated with sialendoscopy.

    PubMed

    Kieliszak, Christopher R; Shokri, Tom; Joshi, Arjun S

    2015-04-26

    Salivary gland trauma may result in ductal stenosis and chronic sialadenitis. We describe a case of an 81-year-old woman with a history of intermittent left submandibular swelling that began after recent dental examination and radiographs. Diagnostic sialendoscopy was performed and demonstrated a near complete distal stenosis. It was determined that trauma experienced during dental radiography may have resulted in the patient's ductal obstruction and subsequent sialadenitis. This case illustrates an unusual presentation of non-sialolith-related ductal obstruction in the submandibular gland, treated with sialendoscopic-assisted sialodochoplasty.

  9. [Digital radiography].

    PubMed

    Haendle, J

    1983-03-01

    Digital radiography is a generally accepted term comprising all x-ray image systems producing a projected image which resembles the conventional x-ray film image, and which are linked to any type of digital image processing. Fundamental criteria of differentiation are based on the production and detection method of the x-ray image. Various systems are employed, viz. the single-detector, line-detector or fanbeam detector and the area-beam or area-detector image converters, which differ from one another mainly in the manner of conversion of the radiation produced by the x-ray tube. The article also deals with the pros and cons of the various principles, the multitude of systems employed, and the varying frequency of their use in x-ray diagnosis work.

  10. Oro-facio-dental findings of rubinstein-taybi syndrome as a useful diagnostic feature.

    PubMed

    Tirali, R Ebru; Sar, Cagla; Cehreli, S Burcak

    2014-01-01

    Rubinstein-Taybi Syndrome (RTS) is a rare multiple congenital syndrome characterized by distinctive facial features, mental and growth retardation, broad thumbs and great toes. This case report describes the oro-dental manifestations, as well as, orthodontic evaluation of a 9-year-old male patient who had RTS. The remarkable oro-dental features were talon-like cingulum on maxillary central incisors, unerupted supernumerary teeth. Cone-beam computerized tomography was taken in order to identify his skeletal anomalies, bilateral cross-bite and a narrow maxilla were diagnosed. Dental treatments were completed under i.v sedation due to the patient's inability to cooperate during dental treatment. Perioparetive and postoperative courses were uneventful. Following dental treatments, orthodontic therapy was initiated with a fixed rapid maxillary expansion appliance.

  11. Patient risk from interproximal radiography

    SciTech Connect

    Gibbs, S.J.; Pujol, A. Jr.; Chen, T.S.; Malcolm, A.W.; James, A.E. Jr.

    1984-09-01

    Computer simulation methods for determining patient dose from dental radiography have demonstrated that patient risk from a two-film interproximal examination ranges from 1.1 X 10(-8) to 3.4 X 10(-7) using 90-kVp beams, depending on film speed, projection technique, and age and sex of the patient. Further, changing from a short-cone round-beam to a long-cone technique with rectangular collimation reduces risk by a factor of 2.9, independent of other factors.

  12. Paroxysmal neuralgia in pediatric population--a diagnostic dilemma for physicians and dental practioners.

    PubMed

    Dubey, A; Mujoo, S; Sakarde, S B; Dubey, A K

    2012-01-01

    Paroxysmal neuralgia is relatively uncommon in children. Neuropathic orofacial pain is a challenge for the clinician, as no obvious dental pathology exists either clinically or radiographically. Dentist and physician should be able to recognize the characteristics of neuropathic pain so as to correctly diagnose these conditions hence avoid unnecessary dental intervention. This article reviews the conditions with paroxysmal neuralgia in children and available treatment strategies.

  13. Non-Destructive Measurement Methods (Neutron-, X-ray Radiography, Vibration Diagnostics and Ultrasound) in the Inspection of Helicopter Rotor Blades

    DTIC Science & Technology

    2005-04-01

    the radiography gauging. In addition to the Statistical Energy Analysis (SEA) measurement a small exciter table (BK4810) and impedance head (BK 8000... Statistical Energy Analysis ; 7th Conf. on Vehicle System Dynamics, Identification and Anomalies (VSDIA2000), 6-8 Nov. 2000 Budapest, Proc. pp. 491-493... Energy Analysis (SEA) and Ultrasound Test. (UT) were concurrently applied. These methods collect accessory information on the objects under inspection

  14. Wireless networking for the dental office: current wireless standards and security protocols.

    PubMed

    Mupparapu, Muralidhar; Arora, Sarika

    2004-11-15

    Digital radiography has gained immense popularity in dentistry today in spite of the early difficulty for the profession to embrace the technology. The transition from film to digital has been happening at a faster pace in the fields of Orthodontics, Oral Surgery, Endodontics, Periodontics, and other specialties where the radiographic images (periapical, bitewing, panoramic, cephalometric, and skull radiographs) are being acquired digitally, stored within a server locally, and eventually accessed for diagnostic purposes, along with the rest of the patient data via the patient management software (PMS). A review of the literature shows the diagnostic performance of digital radiography is at least comparable to or even better than that of conventional radiography. Similarly, other digital diagnostic tools like caries detectors, cephalometric analysis software, and digital scanners were used for many years for the diagnosis and treatment planning purposes. The introduction of wireless charged-coupled device (CCD) sensors in early 2004 (Schick Technologies, Long Island City, NY) has moved digital radiography a step further into the wireless era. As with any emerging technology, there are concerns that should be looked into before adapting to the wireless environment. Foremost is the network security involved in the installation and usage of these wireless networks. This article deals with the existing standards and choices in wireless technologies that are available for implementation within a contemporary dental office. The network security protocols that protect the patient data and boost the efficiency of modern day dental clinics are enumerated.

  15. Digital Radiography: A Technology Overview

    NASA Astrophysics Data System (ADS)

    Arnold, Ben A.

    1982-12-01

    Digital radiography, a term hardly recognized two years ago, has grown to become the talk of the radiology community and the excitement of many commercial companies. M2st of this attention has been directed toward digital subtraction intravenous angiography), although during this same time period, a variety of digital radiography apparatus and image processing techniques have been under development. In November of 1980 at the RSNA Conference in Chicago, three commercial digital angiography systems were announced by Philips, Technicare and ADAC Corporations. During this same time period, the University of Arizona was discussing the concept of a photo electronic radiology department2, the University of Pittsburg and Stanford University were investigating line scan radiography3,4 and approximately five laboratories were carrying out clinical IV angiography with digital video systems.5-9 These developments followed basic research programs in digital electronic and computerized imaging at various locations around the world. 10-18 In the spring of 1981 we attempted to review the state of digital radiography, focusing on the various detector systems and image acquisition approaches.19 Since that time, rapid advancements in digital radiography have occurred. A major conference was held on digital radiography at Stanford UniversityzO, a new area detector system for digital radiography was announced by Fuji Film Corporation, clinical testing began on the Picker line scan digital chest unit21, and improvements were made in selenium detectors for digital radiography. Several additional companies announced digital video angiography systems, bringing the total now to approximately 15 companies worldwide. Digital video subtraction angiography is now well established as an important clinical diagnostic procedure and a variety of improvements and extensions of digital angiography systems are now ongoing. Digital acquisition and storage systems are increasing in both speed and

  16. INDUSTRIAL RADIOGRAPHY INSTRUCTOR'S GUIDE.

    ERIC Educational Resources Information Center

    Bureau of Adult, Vocational, and Technical Education (DHEW/OE), Washington, DC. Div. of Vocational and Technical Education.

    THIS LABORATORY GUIDE WAS DEVELOPED FOR AN 80-HOUR COURSE IN INDUSTRIAL RADIOGRAPHY FOR HIGH SCHOOL GRADUATES TRAINING TO BECOME BEGINNING RADIOGRAPHERS. IT IS USED IN CONJUNCTION WITH TWO OTHER VOLUMES--(1) INDUSTRIAL RADIOGRAPHY INSTRUCTOR'S GUIDE, AND (2) INUDSTRIAL RADIOGRAPHY MANUAL. THE PROGRAM WAS DEVELOPED BY A COMMITTEE OF REPRESENTATIVES…

  17. Increasing mobile radiography productivity.

    PubMed

    Wong, Edward; Lung, Ngan Tsz; Ng, Kris; Jeor, Patrick

    2013-01-01

    Mobile radiography using computed radiography (CR) cassettes is a common equipment combination with a workflow bottleneck limited by location of CR readers. Advent of direct digital radiography (DDR) mobile x-ray machines removes this limitation by immediate image review and quality control. Through the use of key performance indicators (KPIs), the increase in efficiency can be quantified.

  18. An investigation of potential applications of intensifying screens in intraoral radiography

    SciTech Connect

    Stephens, R.G.; Kogon, S.L.; Reid, J.A.

    1982-11-01

    In medicine, the somewhat degraded image from the screen/film system is accepted for most diagnostic purposes in the interest of radiation thrift. In dentistry, however, the superb image resolution and sharpness of the radiation-intensive, direct-exposure film is the standard for intraoral radiography. There may be occasions in dental practice where such quality is not necessary, thus making the high level of exposure difficult to justify. In a laboratory study, screen-type radiographs were effectively substituted for ultraspeed film in the monitoring stages of endodontic therapy and as posttreatment films in operative dentistry. Even with a slow system, the radiation exposure was one sixteenth of the usual periapical dose. If clinical trials support these conclusions, only the lack of a practical periapical cassette limits the application of this significant method of radiation reduction to dental practice.

  19. Fraudulent use of digital radiography: methods to detect and protect digital radiographs.

    PubMed

    Calberson, Filip L G; Hommez, Geert M; De Moor, Roeland J

    2008-05-01

    Digital radiography has become an indispensable diagnostic tool in dentistry today. To improve vision and diagnosis, dental x-ray software allows image enhancement (eg, adjusting color, density, sharpness, brightness, or contrast). Exporting digital radiographs to a file format compatible with commercial graphic software increases chances that information can be altered, added, or removed in an unethical manner. Dental radiographs are easily duplicated, stored, or distributed in digital format. It is difficult to guarantee the authenticity of digital images, which is especially important in insurance or juridic cases. Image-enhancement features applied to digital radiographs allow mishandling or potential abuse. This has been illustrated by several recently published studies. A standard authentication procedure for digital radiographs is needed. A number of manipulated radiographic images are presented to show concerns about security, reliability, and the potential for fraud. Antitampering techniques and methods of detecting manipulations in digital medical images are discussed.

  20. The Use of Audiovisual Procedures in Evaluating Oral Diagnostic and Treatment Planning Skills of Dental Students.

    ERIC Educational Resources Information Center

    Silberman, Stephen L.; And Others

    1980-01-01

    A new test developed by the University of Mississippi School of Dentistry that included videotape, visual aids, and relevant dental data as part of the exam is reported. The degree of student anxiety before, during, and after the examination was measured. A videotaped segment simulating a case history was used. (Author/MLW)

  1. A mini-OSCE for formative assessment of diagnostic and radiographic skills at a dental college in India.

    PubMed

    Lele, Shailesh M

    2011-12-01

    The objective structured clinical examination (OSCE) is being widely used for assessment of skills in dental education around the world. In India, OSCE awareness is rising, and a few exploratory attempts have been made in its implementation. This article describes use of a five-station mini-OSCE for formative assessment of dental diagnostic and radiographic skills in an undergraduate curriculum. Besides gaining experience in OSCEs, the purpose of this project was to study their validity, objectivity, feasibility, acceptability to students and faculty, and impact on student performance. The mini-OSCE was found to be a fairly valid and reliable tool for formative assessment, though it required more planning, preparation, and resources than other means of assessment. A specially developed orientation module improved its feasibility. The nineteen students perceived it to be a meaningful examination and a fair method due to uniformity of tasks and time allocation; they found the scoring to be transparent and objective. The specific and immediate feedback received was appreciated by both students and faculty members.

  2. Using fiber-optic transillumination as a diagnostic aid in dental practice.

    PubMed

    Strassler, Howard E; Pitel, Mark L

    2014-02-01

    Fiber-optic transillumination (FOTI) is a well-accepted and valuable adjunctive diagnostic tool with a wide range of clinical applications. In dentistry, FOTI has been primarily associated with caries diagnosis and has been corroborated through research studies to be a valid indicator of the histological presence or absence of bacterially infected tooth structure. In this review, techniques for using FOTI for tooth evaluation are presented along with examples of how FOTI can be effectively used as a supplemental diagnostic aid.

  3. Free-focus radiography using conventional films: Radiation exposures in a simulated clinical study

    SciTech Connect

    Jensen, T.W.; Randall, G.J.; Goldberg, A.J.

    1980-07-01

    This study compared air exposures during conventional dental and maxillofacial radiography and similar views using free-focus radiography with conventional image receptors. The results show that periapical type surveys on nonscreen film placed extraorally or in the buccal fold may be carried out with an exposure to the surface tissues, which is similar to or less than conventional dental radiography. Extraoral survey type radiographs of the jaws may be carried out with significantly less surface exposure than lateral oblique views of the jaws. The least exposure was required, when the film was placed in the buccla fold instead of against the face during free-focus radiography. The exposures with film screen combinations were reduced by an order of magnitude when compared to the nonscreen techniques. Proper filtration of the beam of the miniaturized x-ray machines radiography in dentistry may thus be desirable and applications in other parts of the body encouraged.

  4. High energy neutron radiography

    SciTech Connect

    Gavron, A.; Morley, K.; Morris, C.; Seestrom, S.; Ullmann, J.; Yates, G.; Zumbro, J.

    1996-06-01

    High-energy spallation neutron sources are now being considered in the US and elsewhere as a replacement for neutron beams produced by reactors. High-energy and high intensity neutron beams, produced by unmoderated spallation sources, open potential new vistas of neutron radiography. The authors discuss the basic advantages and disadvantages of high-energy neutron radiography, and consider some experimental results obtained at the Weapons Neutron Research (WNR) facility at Los Alamos.

  5. Phase-contrast radiography.

    PubMed

    Gao, D; Pogany, A; Stevenson, A W; Wilkins, S W

    1998-01-01

    For the past 100 years, the paradigm for radiography has been premised on absorption as the sole means of contrast formation and on ray optics as the basis for image interpretation. A new conceptual approach to radiography has been developed that includes phase (ie, refractive) contrast and requires wave optics for proper treatment. This new approach greatly increases the amount of information that can be obtained with radiographic techniques and is particularly well suited to the imaging of soft tissue and of very small features in biologic samples. A key feature of the present technique of phase-contrast radiography is the use of a microfocus x-ray source about an order of magnitude (< or = 20 microm) smaller than that used in conventional radiography. Phase-contrast radiography offers a number of improvements over conventional radiography in a clinical setting, especially in soft-tissue imaging. These improvements include increased contrast resulting in improved visualization of anatomic detail, reduced absorbed dose to the patient, inherent image magnification and high spatial resolution, use of harder x rays, and relative ease of implementation. More technologically advanced detectors are currently being developed and commercialized, which will help fully realize the considerable potential of phase-contrast imaging.

  6. Implementation of a PACS for radiography training and clinical service in a university setting through a multinational effort

    NASA Astrophysics Data System (ADS)

    Tang, Fuk-hay; Law, Yuen Y.; Zhang, Jianguo; Liu, Hai L.; Chang, Tony; Matsuda, Koyo; Cao, Fei

    2001-08-01

    The Hong Kong Polytechnic University has a Radiography Division under the Development of Optometry and Radiography. The Division trains both diagnostic and therapeutic radiographers with 60 students/year and offers a B.Sc. degree. In addition the Division together with the University Health Service operates a radiography clinic with radiology consultation from radiologists from other hospitals and clinics. This paper describers the implementation of a PACS in the Division for radiography training, and for clinical service.

  7. Dental OCT

    NASA Astrophysics Data System (ADS)

    Wilder-Smith, Petra; Otis, Linda; Zhang, Jun; Chen, Zhongping

    This chapter describes the applications of OCT for imaging in vivo dental and oral tissue. The oral cavity is a diverse environment that includes oral mucosa, gingival tissues, teeth and their supporting structures. Because OCT can image both hard and soft tissues of the oral cavity at high resolution, it offers the unique capacity to identity dental disease before destructive changes have progressed. OCT images depict clinically important anatomical features such as the location of soft tissue attachments, morphological changes in gingival tissue, tooth decay, enamel thickness and decay, as well as the structural integrity of dental restorations. OCT imaging allows for earlier intervention than is possible with current diagnostic modalities.

  8. 8. VIEW OF RADIOGRAPHY EQUIPMENT, TEST METHODS INCLUDED RADIOGRAPHY AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. VIEW OF RADIOGRAPHY EQUIPMENT, TEST METHODS INCLUDED RADIOGRAPHY AND BETA BACKSCATTERING. (7/13/56) - Rocky Flats Plant, Non-Nuclear Production Facility, South of Cottonwood Avenue, west of Seventh Avenue & east of Building 460, Golden, Jefferson County, CO

  9. Real-time radiography

    SciTech Connect

    Bossi, R.H.; Oien, C.T.

    1981-02-26

    Real-time radiography is used for imaging both dynamic events and static objects. Fluorescent screens play an important role in converting radiation to light, which is then observed directly or intensified and detected. The radiographic parameters for real-time radiography are similar to conventional film radiography with special emphasis on statistics and magnification. Direct-viewing fluoroscopy uses the human eye as a detector of fluorescent screen light or the light from an intensifier. Remote-viewing systems replace the human observer with a television camera. The remote-viewing systems have many advantages over the direct-viewing conditions such as safety, image enhancement, and the capability to produce permanent records. This report reviews real-time imaging system parameters and components.

  10. Phosphor plate radiography: an integral component of the filmless practice.

    PubMed

    Benjamin, Scott

    2010-11-01

    The federal government has mandated that all dental and medical patient records be electronic in 3 years. Practices using film radiography will be unable to comply with this mandate. PSP radiography is not only a surprisingly convenient way to transition from film to digital imaging, it can also greatly enhance the practice's productivity, profitability, and patient satisfaction. Modern, forward-thinking practices will want to take full advantage of PSP's superiority by making this transition now rather than waiting until they are forced to.

  11. Radiography and computed tomography in the diagnosis of nonneoplastic equine mandibular disease.

    PubMed

    Huggons, Nick A; Bell, Robin J W; Puchalski, Sarah M

    2011-01-01

    We compared the information gained from computed tomography (CT) vs. radiography in horses with nonneoplastic disease of the mandible. We hypothesized that CT would provide additional diagnostic information. Medical records, radiographs, and CT images of horses with nonneoplastic mandibular disease evaluated between 1994 and 2008 were reviewed. Nineteen horses were identified; 11 had a tooth root abscess and related disease, four had a fracture of the teeth and/or mandible, and four had a nonneoplastic mass. Both CT images and radiographs allowed identification of diseased teeth that appeared clinically normal otherwise. CT allowed identification of teeth that were clinically affected but appeared normal radiographically. Parameters such as tooth pulp involvement, lamina dura destruction, presence of bone fragments, lingual and buccal mandibular bone periosteal reaction, and cortical bone destruction were more conspicuous with CT. Performing radiography and CT in horses with nonneoplastic mandibular disease provides a more complete evaluation than either technique alone. CT contributes additional information that could otherwise be overlooked with radiographs alone in horses with a mandibular fracture. CT provides ancillary information to radiographs in horses with dental infection or a nonneoplastic mass of the mandible.

  12. Biomedical radiography: radiation protection and safety. (latest citations from the NTIS data base). Published Search

    SciTech Connect

    Not Available

    1992-04-01

    The bibliography contains citations concerning the safety of biomedical radiography. Radiation protection methods and techniques are described for both patients and operators. Safety techniques for dental radiology, routine x-rays, radiotherapy, thoracic radiography and other radiology procedures are included. Radiation exposure limits for patients and healthcare workers are defined. (Contains a minimum of 247 citations and includes a subject term index and title list.)

  13. A diagnostic and therapeutic challenge involving a case of dysphagia in association with cervical osteophytosis and a dental pain.

    PubMed

    Dable, Rajani A; Wasnik, Pradnya B; Nagmode, Sunilkumar L; Ali, Mukkaram Faridi

    2013-07-01

    Herein, presenting a case of a 42-year-old female with the chief complaint of dysphagia. The problem was assumed to be of dental origin, due to the onset of dental pain followed by dysphagia. A cervical radiograph revealed the presence of osteophytic lipping which proved to be the cause of dysphagia. Confusing and overlapping disease entities showing similar symptoms need thorough investigation. Dysphagia related to cervical spondylosis may have a direct connection with the person's occupation. Dentistry is considered a potentially hazardous occupation with regard to musculoskeletal disorders. However, additional studies are required to understand the occupational hazards faced by dentists.

  14. Forensic radiography: an overview.

    PubMed

    Reynolds, April

    2010-01-01

    Perhaps the first instance of forensic radiography occurred in the 1890s when Professor AW Wright of Yale University tested Wilhelm Roentgen's newly discovered x-ray photography on a deceased rabbit. Of interest were small, round objects inside the rabbit that appeared as dark spots on the positive film. The objects were extracted and identified as bullets, thereby helping to determine the cause of the rabbit's death. In the years since Roentgen's discovery, the use of radiography and other medical imaging specialties to aid in investigating civil and criminal matters has increased as investigators realize how radiologic technology can yield information that otherwise is unavailable. Radiologic technologists can play a key role in forensic investigations.

  15. Patient care in radiography

    SciTech Connect

    Ehrlich, R.A.; McCloskey, E.D.

    1989-01-01

    This book focuses on patient care procedures for radiographers. The authors focus on the role of the radiographer as a member of the health care team. The authors report on such topics as communication in patient care: safety, medico-legal considerations, transfer and positioning; physical needs; infection control; medication; CPR standards, acute situations; examination of the GI tract; contrast media; special imaging techniques and bedside radiography.

  16. Predictability of Dental Emergencies by Panography.

    DTIC Science & Technology

    1981-09-30

    population (recruits with little or no prior dental care) demonstrate a high incidence of 1,2dental disease . Various epidemiologic studies have shown the...Medical Center, Washington, DC 20012 I Abstract: A study was undertaken to evaluate the effectiveness and reliability of panoramic radiography for...dental complaints ranked second only to upper respiratory infections. The purpose of this study was to evaluate the effectiveness and reliability of

  17. Comparison of the diagnostic value of CBCT and Digital Panoramic Radiography with surgical findings to determine the proximity of an impacted third mandibular molar to the inferior alveolar nerve canal

    PubMed Central

    Saraydar-Baser, R; Dehghani-Tafti, M; Navab-Azam, A; Ezoddini-Ardakani, F; Nayer, S; Safi, Y; Shamloo, N

    2015-01-01

    Background: This study evaluated and determined the proximity of an impacted third mandibular molar (TMM) to the inferior alveolar canal (IAC) by using CBCT and digital panoramic radiography. Materials and Methods: This descriptive-analytic research applied CBCT and panoramic radiographs for 60 subjects (28 men, 32 women). Subjects selected showed a close proximity about the TMM to the inferior nerve canal on panoramic radiographs; these subjects then received CBCT radiographs. The CBCT findings for the proximity of the TMM to inferior nerve canal used the outcomes of surgical findings as the standard of comparison. Results: Eight cases showed positive surgical findings indicating vicinity of the third molar and the mandibular nerve canal. Only 13.3% of the cases in which panoramic views showed the proximity of the TMM and the IAC were confirmed during surgery. The result for CBCT radiographic diagnosis was 95%. Conclusion: It can be concluded that CBCT is preferred over panoramic radiography to determine the proximity of the impacted TMM to the IAC. Narrowing of the mandibular canal or root canal, disconnection of root borders in panoramic radiography, and the inferior-lingual proximity of the tooth to the root in CBCT strongly indicated the close nearness of the impacted TMM to the IAC. PMID:28316671

  18. Dental caries detection by optical spectroscopy: a polarized Raman approach with fibre-optic coupling

    NASA Astrophysics Data System (ADS)

    Ko, A. C.-T.; Choo-Smith, L.-P.; Werner, J.; Hewko, M.; Sowa, M. G.; Dong, C.; Cleghorn, B.

    2006-09-01

    Incipient dental caries lesions appear as white spots on the tooth surface; however, accurate detection of early approximal lesions is difficult due to limited sensitivity of dental radiography and other traditional diagnostic tools. A new fibre-optic coupled spectroscopic method based on polarized Raman spectroscopy (P-RS) with near-IR laser excitation is introduced which provides contrast for detecting and characterizing incipient caries. Changes in polarized Raman spectra are observed in PO 4 3- vibrations arising from hydroxyapatite of mineralized tooth tissue. Demineralization-induced morphological/orientational alteration of enamel crystallites is believed to be responsible for the reduction of Raman polarization anisotropy observed in the polarized Raman spectra of caries lesions. Supporting evidence obtained by polarized Raman spectral imaging is presented. A specially designed fibre-optic coupled setup for simultaneous measurement of parallel- and cross-polarized tooth Raman spectra is demonstrated in this study.

  19. Dental Assisting Program Guide.

    ERIC Educational Resources Information Center

    Georgia Univ., Athens. Dept. of Vocational Education.

    This program guide contains the standard dental assisting curriculum for technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level dental assistants, and includes job skills in the technical areas of preventive dentistry; four-handed dentistry; chairside assisting with emphasis in diagnostics,…

  20. Dental Amalgam

    MedlinePlus

    ... Products and Medical Procedures Dental Devices Dental Amalgam Dental Amalgam Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Dental amalgam is a dental filling material which is ...

  1. Advances in diagnostic imaging for pathologic conditions of the jaws.

    PubMed

    Benson, Byron W; Flint, Diane J; Liang, Hui; Opatowsky, Michael J

    2014-12-01

    Advances in dental and maxillofacial imaging are delineated along with the advantages and disadvantages of each imaging modality. The imaging modalities that are included are intraoral radiography, panoramic radiography, cone-beam computed tomography, multidetector computed tomography, magnetic resonance imaging, nuclear medicine, and ultrasound.

  2. Survey of radiographic requirements and techniques in United States dental assisting programs, 1982

    SciTech Connect

    Farman, A.G.; Grammer, S.; Hunter, N.; Baker, C.

    1983-10-01

    A survey of dental assisting programs revealed little standardization of student requirements for dental radiography in the United States. Areas for concern were: the high proportion of programs in which classmates exposed one another to ionizing radiation for training purposes; and the continued use of closed cones in some cases. Preclinical laboratories in radiography were, on average, of considerably longer duration than those previously reported for dental students. Conversely, clinical requirements in intraoral techniques were less for dental assisting students than is the case for dental students. Available methods of reducing patient exposure to ionizing radiation are not being fully implemented.

  3. A Taxonomy of Functions of Dental X-Ray Technologists.

    ERIC Educational Resources Information Center

    Doty, Charles R.; And Others

    The taxonomy of the functions of dental x-ray technologists presented in this report resulted from a dental radiography curriculum development project undertaken at Middlesex County College (MCC) in 1981. After an introductory section citing arguments for creating taxonomies of objectives, the report explains the impetus for the curriculum…

  4. Dental prosthesis aspiration: An uncommon cause of respiratory distress.

    PubMed

    De Wilde, Belphine A L; Malfait, Thomas L; Bonte, Katrien; Malfait, Thomas L A

    2016-12-01

    We present a case of a 66-year-old Caucasian man with acute respiratory distress. The patient had a history of multiple cerebrovascular accidents which resulted in left hemiplegia, swallowing problems, and aphasia. He was tentatively diagnosed with aspiration pneumonia. However, because of clinical deterioration further investigations concluded to the aspiration of a dental prosthesis. After intubation and stabilization, the prosthesis could be manually extracted. However, the patient developed a Staphylococcus epidermidis sepsis and despite adequate antibiotic therapy, he eventually died. Dental prosthesis aspiration is a medical situation associated with a higher morbidity and mortality rate compared to ingested foreign bodies. It requires a high level of suspicion to ensure a timely diagnosis and life-saving treatment. Thorough history taking is of great importance in case of tracheobronchial aspiration, which is in the adult population mostly secondary to an underlying disorder. In impaired adults with missing dental prostheses there should be extra awareness for this problem. This case report illustrates the importance of a detailed history in case of tracheobronchial aspiration and shows the limitations in the diagnostic usefulness of bedside chest radiography.

  5. Utility of thyroid collars in cephalometric radiography

    PubMed Central

    Sansare, KP; Khanna, V; Karjodkar, F

    2011-01-01

    Objective A study was carried out to investigate the rationale that use of a thyroid collar (TC) in cephalometric radiography hampers the diagnostic and descriptive quality of lateral cephalogram. Methods A randomized observer blinded study was designed. The study consisted of two groups. The first group data were retrieved from the oral radiology archival system having lateral cephalogram without a TC. The second group was selected from the oral radiology department of patients where lateral cephalogram was taken using a TC. Lateral cephalogram was taken on direct digital system, the Kodak 9000 unit (Eastman Kodak, Rochester, NY). 2 observers blinded about the aim of the study were appointed to identify 15 sets of landmarks on the lateral cephalogram. Interobserver variance was also analysed for the study. Results 50 lateral cephalograms in each group were studied. Out of 15 sets of landmarks, 12 were identified consistent with the TC group. Three landmarks, namely the hyoid bone, second cervical vertebra and third cervical vertebra could not be identified on the TC group. There was no significant difference in the interobserver markings on lateral cephalogram. Conclusions TCs do mask a few landmarks on the lateral cephalogram. These landmarks are mainly used for analysis of skeletal maturity index (SMI). Lead TCs are probably the most convenient and easily available means to protect the thyroid from unwanted radiation while taking lateral cephalogram. It is therefore encouraged to use a TC during routine cephalometric radiography where SMI information is not needed. PMID:22065795

  6. Application of the specular and diffuse reflection analysis for in vitro diagnostics of dental erosion: correlation with enamel softening, roughness, and calcium release

    NASA Astrophysics Data System (ADS)

    Rakhmatullina, Ekaterina; Bossen, Anke; Höschele, Christoph; Wang, Xiaojie; Beyeler, Barbara; Meier, Christoph; Lussi, Adrian

    2011-10-01

    We present assembly and application of an optical reflectometer for the analysis of dental erosion. The erosive procedure involved acid-induced softening and initial substance loss phases, which are considered to be difficult for visual diagnosis in a clinic. Change of the specular reflection signal showed the highest sensitivity for the detection of the early softening phase of erosion among tested methods. The exponential decrease of the specular reflection intensity with erosive duration was compared to the increase of enamel roughness. Surface roughness was measured by optical analysis, and the observed tendency was correlated with scanning electron microscopy images of eroded enamel. A high correlation between specular reflection intensity and measurement of enamel softening (r2 >= -0.86) as well as calcium release (r2 >= -0.86) was found during erosion progression. Measurement of diffuse reflection revealed higher tooth-to-tooth deviation in contrast to the analysis of specular reflection intensity and lower correlation with other applied methods (r2 = 0.42-0.48). The proposed optical method allows simple and fast surface analysis and could be used for further optimization and construction of the first noncontact and cost-effective diagnostic tool for early erosion assessment in vivo.

  7. Application of the specular and diffuse reflection analysis for in vitro diagnostics of dental erosion: correlation with enamel softening, roughness, and calcium release.

    PubMed

    Rakhmatullina, Ekaterina; Bossen, Anke; Höschele, Christoph; Wang, Xiaojie; Beyeler, Barbara; Meier, Christoph; Lussi, Adrian

    2011-10-01

    We present assembly and application of an optical reflectometer for the analysis of dental erosion. The erosive procedure involved acid-induced softening and initial substance loss phases, which are considered to be difficult for visual diagnosis in a clinic. Change of the specular reflection signal showed the highest sensitivity for the detection of the early softening phase of erosion among tested methods. The exponential decrease of the specular reflection intensity with erosive duration was compared to the increase of enamel roughness. Surface roughness was measured by optical analysis, and the observed tendency was correlated with scanning electron microscopy images of eroded enamel. A high correlation between specular reflection intensity and measurement of enamel softening (r(2) ≥ -0.86) as well as calcium release (r(2) ≥ -0.86) was found during erosion progression. Measurement of diffuse reflection revealed higher tooth-to-tooth deviation in contrast to the analysis of specular reflection intensity and lower correlation with other applied methods (r(2) = 0.42-0.48). The proposed optical method allows simple and fast surface analysis and could be used for further optimization and construction of the first noncontact and cost-effective diagnostic tool for early erosion assessment in vivo.

  8. Musculoskeletal injuries in a resource-constrained environment: comparing diagnostic accuracy of on-the-spot ultrasonography and conventional radiography for bone fracture screening during the Paris–Dakar rally raid

    PubMed Central

    Larbi, Ahmed; Lefere, Mathieu; Perozziello, Anne; Hauger, Olivier; Pommerie, Florence; Fraboulet, Bénédicte; Jacob, Denis

    2015-01-01

    Background Ultrasound (US) is a good first-line alternative for the diagnosis of bone fractures in adults as well as children. Our study shows that, compared to X-ray, in a resource-constrained environment, on-site US has a high sensitivity (98%) and specificity (96%) in the diagnosis of bone fractures. Purpose To compare the accuracy of on-the-spot US with conventional radiography in the screening for bone fractures during the Paris–Dakar rally raid. Material and Methods Eighty-three patients (81 men, 2 women) with clinically suspected bone fractures were included in 2013 and 2014. They underwent X-ray and US on the spot, blindly interpreted by two musculoskeletal radiologists. Using X-ray as gold standard, we calculated sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) for US, for each anatomic location. The accuracy of US and radiography were also assessed, as were the number of fragments and their degree of displacement (Student’s t-test). Results Compared with X-ray, sensitivity, specificity, PPV, and NPV of on-site US were, respectively, for the presence (or absence) of fractures: 98%, 98%, 100%, and 95%. The accuracy of US was 99%. Only one radial styloid process fracture was misdiagnosed with US. There was no significant difference between US and X-ray (P > 0.93) concerning the number of fragments and their degree of displacement. Conclusion Bedside musculoskeletal ultrasound performed by trained musculoskeletal radiologists is a useful method in determining and assessing bone fractures in a resource constrained environment. PMID:26034643

  9. Lower Gastrointestinal (GI) Tract X-Ray (Radiography)

    MedlinePlus

    ... Site Index A-Z X-ray (Radiography) - Lower GI Tract Lower gastrointestinal tract radiography or lower GI ... of Lower GI Tract Radiography? What is Lower GI Tract X-ray Radiography (Barium Enema)? Lower gastrointestinal ( ...

  10. Lasers In Dental Diagnosis

    NASA Astrophysics Data System (ADS)

    Everse, K. E.; Sinor, T. W.; Menzel, E. R.

    1987-01-01

    We have investigated the potential of lasers for real time in situ dental diagnosis via transillumination of teeth and gums and via fluorescence. Not surprisingly, absorption and/or scattering of light by teeth was found to be insensitive to light color. However, monochromatic transillumination revealed detail better than white light. Transillumination of gums was best performed with orange-red light because of tissue absorption. Illumination of oral structures by 488 nm Ar-laser light was effective in revealing diagnosis detail by fluorescence. Incipient caries and fine tooth fracture lines that are generally not revealed by radiography were observable by laser.

  11. Is radiography justified for the evaluation of patients presenting with cervical spine trauma?

    SciTech Connect

    Theocharopoulos, Nicholas; Chatzakis, Georgios; Damilakis, John

    2009-10-15

    Conventional radiography has been for decades the standard method of evaluation for cervical spine trauma patients. However, currently available helical multidetector CT scanners allow multiplanar reconstruction of images, leading to increased diagnostic accuracy. The purpose of this study was to determine the relative benefit/risk ratio between cervical spine CT and cervical spine radiography and between cervical spine CT and cervical spine radiography, followed by CT as an adjunct for positive findings. A decision analysis model for the determination of the optimum imaging technique was developed. The sensitivity and specificity of CT and radiography were obtained by dedicated meta-analysis. Lifetime attributable risk of mortal cancer from CT and radiography was calculated using updated organ-specific risk coefficients and organ-absorbed doses. Patient organ doses from radiography were calculated using Monte Carlo techniques, simulated exposures performed on an anthropomorphic phantom, and thermoluminescence dosimetry. A prospective patient study was performed regarding helical CT scans of the cervical spine. Patient doses were calculated based on the dose-length-product values and Monte Carlo-based CT dosimetry software program. Three groups of patient risk for cervical spine fracture were incorporated in the decision model on the basis of hypothetical trauma mechanism and clinical findings. Radiation effects were assessed separately for males and females for four age groups (20, 40, 60, and 80 yr old). Effective dose from radiography amounts to 0.050 mSv and from a typical CT scan to 3.8 mSv. The use of CT in a hypothetical cohort of 10{sup 6} patients prevents approximately 130 incidents of paralysis in the low risk group (a priori fracture probability of 0.5%), 500 in the moderate risk group (a priori fracture probability of 2%), and 5100 in the high risk group (a priori fracture probability of 20%). The expense of this CT-based prevention is 15-32 additional

  12. The implementation of digital sensors in maxillofacial radiography

    NASA Astrophysics Data System (ADS)

    van der Stelt, Paul F.

    2001-03-01

    Systems for intra-oral digital radiography in dentistry can be divided into two main groups: direct sensor systems and semi-direct or indirect sensor systems. Direct imaging is performed by a two-dimensional array of sensor elements. The size of a typical intra-oral CCD-sensor is approximately from 18 mm×24 mm to 30 mm×40 mm; the active area is somewhat smaller, because of the thickness of the packaging of the sensor. CCD-based imaging is now also available for panoramic and cephalometric radiography. Indirect (semi-direct) imaging is based on storage phosphor plates (SPP) imaging. The plate is positioned in the mouth of the patient behind the teeth, and exposed to radiation. The positioning of the sensor plate resembles very much the way conventional radiographic films are handled. SPP technology is also available for panoramic and cephalometric imaging. The purpose of radiography is to provide information to solve a particular diagnostic task. It is therefore very likely that the role of dedicated diagnostic software will become essential in the near future. The importance of dedicated software for diagnostic imaging will increase. As a result of worldwide research, more procedures will become available, for research as well as for use in general practice.

  13. Industrial Radiography | Radiation Protection | US EPA

    EPA Pesticide Factsheets

    2016-12-09

    Manufacturers use a method called industrial radiography to check for cracks or flaws in materials. Radiation is used in industrial radiography to show problems not visible from the outside without damaging the material.

  14. Accelerator system for neutron radiography

    SciTech Connect

    Rusnak, B; Hall, J

    2000-09-21

    The field of x-ray radiography is well established for doing non-destructive evaluation of a vast array of components, assemblies, and objects. While x-rays excel in many radiography applications, their effectiveness diminishes rapidly if the objects of interest are surrounded by thick, high-density materials that strongly attenuate photons. Due to the differences in interaction mechanisms, neutron radiography is highly effective in imaging details inside such objects. To obtain a high intensity neutron source suitable for neutron imaging a 9-MeV linear accelerator is being evaluated for putting a deuteron beam into a high-pressure deuterium gas cell. As a windowless aperture is needed to transport the beam into the gas cell, a low-emittance is needed to minimize losses along the high-energy beam transport (HEBT) and the end station. A description of the HEBT, the transport optics into the gas cell, and the requirements for the linac will be presented.

  15. Radiographic signs and diagnosis of dental disease.

    PubMed

    Bellows, J

    1993-08-01

    Dental radiographs are critical for the complete assessment and treatment of dental diseases. Dental radiography is commonly used to evaluate congenital dental defects, periodontal disease, orthodontic manipulations, oral tumors, endodontic treatments, oral trauma, and any situation where an abnormality is suspected. Although standard radiographic equipment and film can be used to produce dental radiographs, dental X-ray equipment and film provide superior quality images and greater convenience of animal patient positioning. An understanding of normal dental radiographic anatomy is important when interpreting dental radiographs. Stage III periodontitis is the earliest stage of periodontal disease at which radiographic abnormalities become apparent. Bone loss associated with periodontal disease can be classified as either horizontal or vertical. Periapical radiolucencies can represent granulomas, cysts, or abscesses, whereas periapical radiodensities may represent sclerotic bone or condensing osteitis. Lytic lesions of the bone of the jaw often represent oral neoplasms. Neoplasms also can displace or disrupt teeth in the dental arch. Resorptive lesions can be external or internal and appear as radiolucent areas involving the external surface of the root or the pulp cavity, respectively. Feline dental resorptive lesions, also known as odontoclastic resorptions, are a specific form of dental resorptive lesions unique to cats.

  16. On the sensitivity of thermophotonic lock-in imaging and polarized Raman spectroscopy to early dental caries diagnosis.

    PubMed

    Tabatabaei, Nima; Mandelis, Andreas; Dehghany, Mehdi; Michaelian, Kirk H; Amaechi, Bennet T

    2012-02-01

    Dental caries is the leading cause of tooth loss, which can promptly be prevented if detected in early stages of progression. Unfortunately, conventional diagnostic modalities currently used in dentistry lack the sensitivity to detect early caries. The authors' intention is to compare the ability of polarized Raman spectroscopy and thermophotonic imaging to make early caries diagnosis. Extracted human teeth with no visible stain or defects were artificially demineralized in accordance to a well-known protocol in dentistry for simulated early caries development at several demineralization stages. Samples were then inspected using polarized Raman spectroscopy and thermophotonic imaging. The sensitivities of these two diagnostic modalities are compared, and the results are verified using transverse micro-radiography. It was found that compared to polarized Raman spectroscopy, thermophotonic imaging exhibits superior sensitivity to very early stages of demineralization.

  17. On the sensitivity of thermophotonic lock-in imaging and polarized Raman spectroscopy to early dental caries diagnosis

    NASA Astrophysics Data System (ADS)

    Tabatabaei, Nima; Mandelis, Andreas; Dehghany, Mehdi; Michaelian, Kirk H.; Amaechi, Bennet T.

    2012-02-01

    Dental caries is the leading cause of tooth loss, which can promptly be prevented if detected in early stages of progression. Unfortunately, conventional diagnostic modalities currently used in dentistry lack the sensitivity to detect early caries. The authors' intention is to compare the ability of polarized Raman spectroscopy and thermophotonic imaging to make early caries diagnosis. Extracted human teeth with no visible stain or defects were artificially demineralized in accordance to a well-known protocol in dentistry for simulated early caries development at several demineralization stages. Samples were then inspected using polarized Raman spectroscopy and thermophotonic imaging. The sensitivities of these two diagnostic modalities are compared, and the results are verified using transverse micro-radiography. It was found that compared to polarized Raman spectroscopy, thermophotonic imaging exhibits superior sensitivity to very early stages of demineralization.

  18. Spatial resolution measurements of the advanced radiographic capability x-ray imaging system at energies relevant to Compton radiography

    NASA Astrophysics Data System (ADS)

    Hall, G. N.; Izumi, N.; Landen, O. L.; Tommasini, R.; Holder, J. P.; Hargrove, D.; Bradley, D. K.; Lumbard, A.; Cruz, J. G.; Piston, K.; Lee, J. J.; Romano, E.; Bell, P. M.; Carpenter, A. C.; Palmer, N. E.; Felker, B.; Rekow, V.; Allen, F. V.

    2016-11-01

    Compton radiography provides a means to measure the integrity, ρR and symmetry of the DT fuel in an inertial confinement fusion implosion near peak compression. Upcoming experiments at the National Ignition Facility will use the ARC (Advanced Radiography Capability) laser to drive backlighter sources for Compton radiography experiments and will use the newly commissioned AXIS (ARC X-ray Imaging System) instrument as the detector. AXIS uses a dual-MCP (micro-channel plate) to provide gating and high DQE at the 40-200 keV x-ray range required for Compton radiography, but introduces many effects that contribute to the spatial resolution. Experiments were performed at energies relevant to Compton radiography to begin characterization of the spatial resolution of the AXIS diagnostic.

  19. Spatial resolution measurements of the advanced radiographic capability x-ray imaging system at energies relevant to Compton radiography.

    PubMed

    Hall, G N; Izumi, N; Landen, O L; Tommasini, R; Holder, J P; Hargrove, D; Bradley, D K; Lumbard, A; Cruz, J G; Piston, K; Lee, J J; Romano, E; Bell, P M; Carpenter, A C; Palmer, N E; Felker, B; Rekow, V; Allen, F V

    2016-11-01

    Compton radiography provides a means to measure the integrity, ρR and symmetry of the DT fuel in an inertial confinement fusion implosion near peak compression. Upcoming experiments at the National Ignition Facility will use the ARC (Advanced Radiography Capability) laser to drive backlighter sources for Compton radiography experiments and will use the newly commissioned AXIS (ARC X-ray Imaging System) instrument as the detector. AXIS uses a dual-MCP (micro-channel plate) to provide gating and high DQE at the 40-200 keV x-ray range required for Compton radiography, but introduces many effects that contribute to the spatial resolution. Experiments were performed at energies relevant to Compton radiography to begin characterization of the spatial resolution of the AXIS diagnostic.

  20. Dosimetric considerations in dental applications

    NASA Technical Reports Server (NTRS)

    Goble, J. C.

    1978-01-01

    The integration of the Lixiscope into dental procedures was studied and compared with conventional dental radiographic techniques. It was found that through the use of intraoral sealed sources in conjunction with microchannel plate technology, the Lixiscope gives increased diagnostic information with decreased radiation dosage.

  1. Hardware Accelerated Simulated Radiography

    SciTech Connect

    Laney, D; Callahan, S; Max, N; Silva, C; Langer, S; Frank, R

    2005-04-12

    We present the application of hardware accelerated volume rendering algorithms to the simulation of radiographs as an aid to scientists designing experiments, validating simulation codes, and understanding experimental data. The techniques presented take advantage of 32 bit floating point texture capabilities to obtain validated solutions to the radiative transport equation for X-rays. An unsorted hexahedron projection algorithm is presented for curvilinear hexahedra that produces simulated radiographs in the absorption-only regime. A sorted tetrahedral projection algorithm is presented that simulates radiographs of emissive materials. We apply the tetrahedral projection algorithm to the simulation of experimental diagnostics for inertial confinement fusion experiments on a laser at the University of Rochester. We show that the hardware accelerated solution is faster than the current technique used by scientists.

  2. Development of Compton radiography of inertial confinement fusion implosions

    SciTech Connect

    Tommasini, R.; Hatchett, S. P.; Hey, D. S.; Iglesias, C.; Izumi, N.; Koch, J. A.; Landen, O. L.; MacKinnon, A. J.; Sorce, C.; Delettrez, J. A.; Glebov, V. Yu.; Sangster, T. C.; Stoeckl, C.

    2011-05-15

    An important diagnostic tool for inertial confinement fusion will be time-resolved radiographic imaging of the dense cold fuel surrounding the hot spot. The measurement technique is based on point-projection radiography at photon energies from 60 to 200 keV where the Compton effect is the dominant contributor to the opacity of the fuel or pusher. We have successfully applied this novel Compton radiography technique to the study of the final compression of directly driven plastic capsules at the OMEGA facility [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)]. The radiographs have a spatial and temporal resolution of {approx}10 {mu}m and {approx}10 ps, respectively. A statistical accuracy of {approx}0.5% in transmission per resolution element is achieved, allowing localized measurements of areal mass densities to 7% accuracy. The experimental results show 3D nonuniformities and lower than 1D expected areal densities attributed to drive asymmetries and hydroinstabilities.

  3. Proton radiography of a shock-compressed target

    SciTech Connect

    Ravasio, A.; Benuzzi-Mounaix, A.; Loupias, B.; Ozaki, N.; Vinci, T.; Koenig, M.; Romagnani, L.; Cecchetti, C.; Borghesi, M.; Le Pape, S.; Hicks, D.; MacKinnon, A.; Park, H. S.; Patel, P.; Batani, D.; Dezulian, R.; Boehly, T.; Gremillet, L.; Henry, E.; Schiavi, A.

    2010-07-15

    In this paper we report on the radiography of a shock-compressed target using laser produced proton beams. A low-density carbon foam target was shock compressed by long pulse high-energy laser beams. The shock front was transversally probed with a proton beam produced in the interaction of a high intensity laser beam with a gold foil. We show that from radiography data, the density profile in the shocked target can be deduced using Monte Carlo simulations. By changing the delay between long and short pulse beams, we could probe different plasma conditions and structures, demonstrating that the details of the steep density gradient can be resolved. This technique is validated as a diagnostic for the investigation of warm dense plasmas, allowing an in situ characterization of high-density contrasted plasmas.

  4. Exposure reduction of 96% in intraoral radiography

    SciTech Connect

    Kircos, L.T.; Vandre, R.H.; Lorton, L.

    1986-11-01

    This study compared the diagnostic quality of E-speed film, xeroradiographic cassettes, and a screen-film imaging system used in medical radiology. The surfaces of defects simulating caries were scored for the presence and depth of the defects under ideal viewing conditions by independent observers. Receiver Operator Characteristics analysis of the data showed no significant differences regarding diagnostic potential among the three systems. The true-positive fraction was 1.00 for all systems and all operators, and the false-positive fraction was .011, .011, and .007, respectively. An exposure of 5.5 mR was used to produce images with the screen-film combination, and 150 mR was used for standard dental systems. This study showed that an exposure reduction of 96% is possible while maintaining high-quality radiographs for the diagnosis of caries.

  5. Dental Procedures.

    PubMed

    Ramponi, Denise R

    2016-01-01

    Dental problems are a common complaint in emergency departments in the United States. There are a wide variety of dental issues addressed in emergency department visits such as dental caries, loose teeth, dental trauma, gingival infections, and dry socket syndrome. Review of the most common dental blocks and dental procedures will allow the practitioner the opportunity to make the patient more comfortable and reduce the amount of analgesia the patient will need upon discharge. Familiarity with the dental equipment, tooth, and mouth anatomy will help prepare the practitioner for to perform these dental procedures.

  6. System for uncollimated digital radiography

    DOEpatents

    Wang, Han; Hall, James M.; McCarrick, James F.; Tang, Vincent

    2015-08-11

    The inversion algorithm based on the maximum entropy method (MEM) removes unwanted effects in high energy imaging resulting from an uncollimated source interacting with a finitely thick scintillator. The algorithm takes as input the image from the thick scintillator (TS) and the radiography setup geometry. The algorithm then outputs a restored image which appears as if taken with an infinitesimally thin scintillator (ITS). Inversion is accomplished by numerically generating a probabilistic model relating the ITS image to the TS image and then inverting this model on the TS image through MEM. This reconstruction technique can reduce the exposure time or the required source intensity without undesirable object blurring on the image by allowing the use of both thicker scintillators with higher efficiencies and closer source-to-detector distances to maximize incident radiation flux. The technique is applicable in radiographic applications including fast neutron, high-energy gamma and x-ray radiography using thick scintillators.

  7. Dynamic chest radiography: flat-panel detector (FPD) based functional X-ray imaging.

    PubMed

    Tanaka, Rie

    2016-07-01

    Dynamic chest radiography is a flat-panel detector (FPD)-based functional X-ray imaging, which is performed as an additional examination in chest radiography. The large field of view (FOV) of FPDs permits real-time observation of the entire lungs and simultaneous right-and-left evaluation of diaphragm kinetics. Most importantly, dynamic chest radiography provides pulmonary ventilation and circulation findings as slight changes in pixel value even without the use of contrast media; the interpretation is challenging and crucial for a better understanding of pulmonary function. The basic concept was proposed in the 1980s; however, it was not realized until the 2010s because of technical limitations. Dynamic FPDs and advanced digital image processing played a key role for clinical application of dynamic chest radiography. Pulmonary ventilation and circulation can be quantified and visualized for the diagnosis of pulmonary diseases. Dynamic chest radiography can be deployed as a simple and rapid means of functional imaging in both routine and emergency medicine. Here, we focus on the evaluation of pulmonary ventilation and circulation. This review article describes the basic mechanism of imaging findings according to pulmonary/circulation physiology, followed by imaging procedures, analysis method, and diagnostic performance of dynamic chest radiography.

  8. Dental Optical Coherence Tomography

    PubMed Central

    Hsieh, Yao-Sheng; Ho, Yi-Ching; Lee, Shyh-Yuan; Chuang, Ching-Cheng; Tsai, Jui-che; Lin, Kun-Feng; Sun, Chia-Wei

    2013-01-01

    This review paper describes the applications of dental optical coherence tomography (OCT) in oral tissue images, caries, periodontal disease and oral cancer. The background of OCT, including basic theory, system setup, light sources, spatial resolution and system limitations, is provided. The comparisons between OCT and other clinical oral diagnostic methods are also discussed. PMID:23857261

  9. Thoracic radiography in the cat: Identification of cardiomegaly and congestive heart failure.

    PubMed

    Guglielmini, Carlo; Diana, Alessia

    2015-12-01

    Thoracic radiography is one of the most commonly employed diagnostic tools for the clinical evaluation of cats with suspected heart disease and is the standard diagnostic method in the confirmation of cardiogenic pulmonary edema. In the past, interpretation of feline radiographs focused on a description of the qualitative radiographic features of feline heart disease or the measurement of the cardiac silhouette in healthy cats and cats with different cardiovascular disorders. More recently, studies have begun to critically address the issue of the diagnostic accuracy of thoracic radiography in the diagnostic work-up of cats with heart disease. In these studies, qualitative and quantitative radiographic parameters were compared to echocardiographic findings to evaluate the usefulness of thoracic radiography for the identification of cardiac enlargement and pulmonary edema in the cat. Thoracic radiography is reasonably specific but has a low sensitivity when identifying cardiomegaly in cats with mild structural heart disease. Feline cardiogenic pulmonary edema has a variable radiographic presentation and several specific radiographic findings (i.e., enlargement of the left atrium and the pulmonary veins) can be absent or non-recognizable in affected cats.

  10. [Information technologies for scanning X-ray radiography].

    PubMed

    Kretov, V V; Ukraintsev, Iu G

    2005-01-01

    Digital technologies have been widely used in X-rays diagnostics, including computer tomography, magnetic-resonance tomography, digital radiography etc. Digital technologies for image analysis essentially change all arrangements and procedures of preventive examinations made at patient-care facilities. As for digital fluorography, the basic principles of fluorography diagnostic room are standard but for one arrangement-the unit is controlled via a computer-assisted working place (CAWP) by the radiologist assistant; the room of radiologist is also equipped with CAWP. Admittedly, a key issue in general fluorographic examinations is registration of patients and preparation of them for the procedure. Contemplated in the paper are new potentialities of digital fluorography of big number of patients by low-dose fluorography (LDF, equipment manufacturer/Orel, Russia) which enhance the rate and quality of diagnostics.

  11. Clinical utility of dental cone-beam computed tomography: current perspectives

    PubMed Central

    Jaju, Prashant P; Jaju, Sushma P

    2014-01-01

    Panoramic radiography and computed tomography were the pillars of maxillofacial diagnosis. With the advent of cone-beam computed tomography, dental practice has seen a paradigm shift. This review article highlights the potential applications of cone-beam computed tomography in the fields of dental implantology and forensic dentistry, and its limitations in maxillofacial diagnosis. PMID:24729729

  12. Clinical validation of the use of fluorescence for the early detection of dental caries

    NASA Astrophysics Data System (ADS)

    Stookey, George K.; Isaacs, Roger L.; Ferreira Zandona, Andrea G.; Ando, Masatoshi; Gonzalez, Carlos; Mau, Melissa S.; Kelly, Sue A.; Analoui, Mostafa

    1999-05-01

    A clinical investigation was conducted in children to validate the use of fluorescence for the early detection of dental caries. A total of 150 children were examined for the presence of dental caries at baseline and at 4-month intervals for one year using conventional visual-tactile with and without a dental explorer, electrical conductivity and light fluorescence methods on the occlusal, buccal and lingual tooth surfaces. Interproximal tooth surfaces were examined using conventional film and direct digital radiography at baseline and 12 months. Validation of the clinical methods was performed by the histologic examination of exfoliated primary teeth. The results indicate that visual-tactile examinations with an explorer detected more carious lesions than similar examinations without an explorer. The use of quantitative light fluorescence permitted the detection of a substantially greater number of enamel lesions or demineralized areas than the conventional visual-tactile-radiographic diagnostic procedure. Further, the use of the quantitative light fluorescence permitted the monitoring of both the progression of regression of early carious lesions.

  13. Management of pediatric radiation dose using Agfa computed radiography.

    PubMed

    Schaetzing, R

    2004-10-01

    Radiation dose to patients and its management have become important considerations in modern radiographic imaging procedures, but they acquire particular significance in the imaging of children. Because of their longer life expectancy, children exposed to radiation are thought to have a significantly increased risk of radiation-related late sequelae compared to adults first exposed to radiation later in life. Therefore, current clinical thinking dictates that dose in pediatric radiography be minimized, while simultaneously ensuring sufficient diagnostic information in the image, and reducing the need for repeat exposures. Dose management obviously starts with characterization and control of the exposure technique. However, it extends farther through the imaging chain to the acquisition system, and even to the image processing techniques used to optimize acquired images for display. Further, other factors, such as quality control procedures and the ability to handle special pediatric procedures, like scoliosis exams, also come into play. The need for dose management in modern radiography systems has spawned a variety of different solutions, some of which are similar across different manufacturers, and some of which are unique. This paper covers the techniques used in Agfa Computed Radiography (CR) systems to manage dose in a pediatric environment.

  14. X-ray vector radiography imaging for biomedical applications

    SciTech Connect

    Potdevin, Guillaume; Malecki, Andreas; Biernath, Thomas; Bech, Martin; Pfeiffer, Franz

    2012-07-31

    The non-invasive estimation of fracture risk in osteoporosis remains a challenge in the clinical routine and is mainly based on an assessment of bone density by dual X-ray absorption (DXA) although bone micro-architecture is known to play an important role for bone fragility. Here we report on 'X-ray vector Radiography' measurements able to provide a direct bone microstructure diagnostics on human bone samples, which we compare qualitatively and quantitatively with numerical analysis of high resolution radiographs.

  15. X-ray vector radiography imaging for biomedical applications

    NASA Astrophysics Data System (ADS)

    Potdevin, Guillaume; Malecki, Andreas; Biernath, Thomas; Bech, Martin; Pfeiffer, Franz

    2012-07-01

    The non-invasive estimation of fracture risk in osteoporosis remains a challenge in the clinical routine and is mainly based on an assessment of bone density by dual X-ray absorption (DXA) although bone micro-architecture is known to play an important role for bone fragility. Here we report on 'X-ray vector Radiography' measurements able to provide a direct bone microstructure diagnostics on human bone samples, which we compare qualitatively and quantitatively with numerical analysis of high resolution radiographs.

  16. Lesion detectability in digital radiography

    NASA Astrophysics Data System (ADS)

    Gagne, Robert M.; Boswell, Jonathan S.; Myers, Kyle J.; Peter, Guillaume

    2001-06-01

    The usefulness of Fourier-based measures of imaging performance has come into question for the evaluation of digital imaging systems. Figures of merit such as detective quantum efficiency are relevant for linear, shift-invariant systems with stationary noise. However, no digital imaging system is shift invariant, and realistic images do not satisfy the stationarity condition. Our methods for task- based evaluation of imaging systems, based on lesion detectability, do not require such assumptions. We have computed the performance of Hotelling and nonprewhitening matched-filter observers for the task of lesion detection in digital radiography.

  17. Dental Hygienists

    MedlinePlus

    ... years to complete, and offer laboratory, clinical, and classroom instruction. Areas of study include anatomy, physiology, nutrition, radiography, pathology, medical ethics, head and neck anatomy, patient management, and periodontics, which is the study of gum ...

  18. ARG portable neutron radiography. Final report

    SciTech Connect

    Barton, J.P.

    1995-04-01

    In this report all available neutron radiographic data, including results of tests run at LANL, McClellan AFB, and University of Virginia, will be combined to outline specific transportable neutron radiography systems that could achieve the desired results as a complement to x-radiography capabilities for the Accident Response Group (ARG).

  19. INDUSTRIAL RADIOGRAPHY STUDENT GUIDE AND LABORATORY EXERCISES.

    ERIC Educational Resources Information Center

    Bureau of Adult, Vocational, and Technical Education (DHEW/OE), Washington, DC. Div. of Vocational and Technical Education.

    THIS INSTRUCTOR'S GUIDE TO AN 80-HOUR COURSE IN INDUSTRIAL RADIOGRAPHY IS COORDINATED WITH LESSONS IN THE STUDENT GUIDE AND LABORATORY EXERCISES AND IS BASED ON MATERIAL IN THE COURSE MANUAL, INDUSTRIAL RADIOGRAPHY. THE COURSE IS INTENDED TO TRAIN HIGH SCHOOL GRADUATES AS BEGINNING RADIOGRAPHERS WHO ARE EXPECTED TO BE ABLE TO EXTEND THEIR…

  20. PROTON RADIOGRAPHY FOR AN ADVANCED HYDROTEST FACILITY

    SciTech Connect

    C. MORRIS

    2000-11-01

    Analysis of data from BNL experiment 933 is presented. Results demonstrate that proton radiography can meet many of the requirements for an Advanced Hydrotest Facility (AHF). Results for background, position resolution, metrology, quantitative radiography, material identification, and edge resolution are presented.

  1. Process waste assessment for the Radiography Laboratory

    SciTech Connect

    Phillips, N.M.

    1994-07-01

    This Process Waste Assessment was conducted to evaluate the Radiography Laboratory, located in Building 923. It documents the processes, identifies the hazardous chemical waste streams generated by these processes, recommends possible ways to minimize waste, and serves as a reference for future assessments of this facility. The Radiography Laboratory provides film radiography or radioscopy (electronic imaging) of weapon and nonweapon components. The Radiography Laboratory has six x-ray machines and one gamma ray source. It also has several other sealed beta- and gamma-ray isotope sources of low microcurie ({mu}Ci) activity. The photochemical processes generate most of the Radiography Laboratory`s routinely generated hazardous waste, and most of that is generated by the DuPont film processor. Because the DuPont film processor generates the most photochemical waste, it was selected for an estimated material balance.

  2. Dose measurements in intraoral radiography using thermoluminescent dosimeters

    NASA Astrophysics Data System (ADS)

    Azorín, C.; Azorín, J.; Aguirre, F.; Rivera, T.

    2015-01-01

    The use of X-ray in medicine demands to expose the patient and the professional to the lowest radiation doses available in agreement with ALARA philosophy. The reference level for intraoral dental radiography is 7 mGy and, in Mexico, a number of examinations of this type are performed annually. It is considered that approximately 25% of all the X-rays examinations carried out in our country correspond to intraoral radiographies. In other hand, most of the intraoral X-ray equipment correspond to conventional radiological systems using film, which are developed as much manual as automatically. In this work the results of determining the doses received by the patients in intraoral radiological examinations made with different radiological systems using LiF:Mg,Cu,P+PTFE thermoluminescent dosimeters are presented. In some conventional radiological systems using film, when films are developed manual or automatically, incident kerma up to 10.61 ± 0.74 mGv were determined. These values exceed that reference level suggested by the IAEA and in the Mexican standards for intraoral examinations.

  3. Quality assurance in film radiography

    SciTech Connect

    Van Bellegem, L.; Vaessen, B.

    1993-12-31

    The ISO 9000 standards were originally developed during the 1980`s to provide uniform, worldwide quality assurance requirements. The EC (European Communities) adopted these standards as part of their modular approach to ``conformity assessment`` procedures, for several product categories. This includes the development of standards (specifications) which define what the purchaser wants and what the supplier agrees to provide, as well as quality system registration (certification) which increases confidence in the supplier`s ability to produce consistently. The requirements are typically most rigorous for regulated products that have a major impact on health and safety i.e film radiographic systems. This is the main reason for making available the necessary Q.C. tools in film radiography to comply with Q.A. specifications and guarantee the required consistent performance. These tools can only give satisfying support if they are dedicated, easy to use, precise and cost effective at the user`s level. The main topics for such a Q.A. package are: (1) standard for Film System classification for industrial radiography; (2) film system certification; and (3) standard for control of film processing by means of reference values i.e. pre-exposed film wedges and archiving quality control method.

  4. Plasma-flash radiography utilizing a molybdenum target in dentistry

    NASA Astrophysics Data System (ADS)

    Yamamoto, Mariko; Takabe, Akihito; Sakamaki, Kimio; Sato, Eiichi; Takahashi, Kei; Sagae, Michiaki; Oizumi, Teiji; Hayasi, Yasuomi; Sasaki, Katsuaki; Tamakawa, Yoshiharu; Yanagisawa, Toru

    1995-09-01

    The construction and the radiographic characteristics of a plasma flash x-ray generator having a molybdenum-target (anode tip) triode are described. This generator was primarily designed in order to perform soft radiography in dental medicine and employed the following essential components: a high-voltage power supply, a low-impedance coaxial transmission line with a gap switch, a coaxial oil condenser of 0.2 (mu) F, a turbo-molecular pump, a Krytron pulser as a trigger device, and a flash x-ray tube. The high-voltage main condenser of 0.2 (mu) F was charged from 40 to 60 kV by the power supply, and the electric charges in the condenser were discharged to the tube after closing the gap switch. Because this tube employed a long target, the plasma x-ray source which consists of molybdenum ions and electrons was easily produced by the target evaporating. The maximum tube voltage was nearly equivalent to the initial charge voltage of the main condenser, and the maximum current had a value of about 25 kA with a charging voltage of 60 kV. The average width of flash x rays was less than 1 microsecond(s) , and the time-integrated x-ray intensity with a charging voltage of 60 kV was approximately 20 (mu) C/kg at 1.0 m per pulse. The characteristic K-series intensity substantially increased according to increases in the charged voltage. High-speed dental radiography was performed using a laser timing switch and a trigger-delay device.

  5. Plasma-flash radiography utilizing a molybdenum target in dentistry

    SciTech Connect

    Yamamoto, Mariko; Takabe, Akihito; Sakamaki, Kimio

    1995-12-31

    The construction and the radiographic characteristics of a plasma flash x-ray generator having a molybdenum-target (anode tip) triode are described. This generator was primarily designed in order to perform soft radiography in dental medicine and employed the following essential components: a high-voltage power supply, a low-impedance coaxial transmission line with a gap switch, a coaxial oil condenser of 0.2 {micro}F, a turbo-molecular pump, a Krytron pulser as a trigger device, and a flash x-ray tube. The high-voltage main condenser of 0.2 {micro}F was charged from 40 to 60 kV by the power supply, and the electric charges in the condenser were discharged to the tube after closing the gap switch. Because this tube employed a long target, the plasma x-ray source which consists of molybdenum ions and electrons was easily produced by the target evaporating. The maximum tube voltage was nearly equivalent to the initial charging voltage of the main condenser, and the maximum current had a value of about 25 kA with a charging voltage of 60 kV. The average width of flash x rays was less than 1 {micro}s, and the time-integrated x-ray intensity with a charging voltage of 60 kV was approximately 20 {micro}C/kg at 1.0 m per pulse. The characteristic K-series intensity substantially increased according to increases in the charging voltage. High-speed dental radiography was performed by using a laser timing switch and a trigger-delay device.

  6. Dental Assistants

    MedlinePlus

    ... help keep the dental office running smoothly. Important Qualities Detail oriented. Dental assistants must follow specific rules and protocols, such as infection control procedures, when helping dentists treat patients. Assistants also ...

  7. Usefulness of an energy-binned photon-counting x-ray detector for dental panoramic radiographs

    NASA Astrophysics Data System (ADS)

    Fukui, Tatsumasa; Katsumata, Akitoshi; Ogawa, Koichi; Fujiwara, Shuu

    2015-03-01

    A newly developed dental panoramic radiography system is equipped with a photon-counting semiconductor detector. This photon-counting detector acquires transparent X-ray beams by dividing them into several energy bands. We developed a method to identify dental materials in the patient's teeth by means of the X-ray energy analysis of panoramic radiographs. We tested various dental materials including gold alloy, dental amalgam, dental cement, and titanium. The results of this study suggest that X-ray energy scattergram analysis could be used to identify a range of dental materials in a patient's panoramic radiograph.

  8. Advances in equine dental radiology.

    PubMed

    Baratt, Robert

    2013-08-01

    Although diagnostic images can be obtained with traditional rare-earth film-screen combinations, digital radiography (DR) has enhanced the ability of the general practitioner to obtain diagnostic radiographs of the equine head. With the widespread availability of DR in equine practices, the practitioner can more readily learn the correct positioning for the various projections of the equine head that are used to evaluate the dentition and sinuses. Digital systems provide rapid processing of the image, enabling the practitioner to correct positioning errors and retake the image without significant delay.

  9. Image enhancement for radiography inspection

    NASA Astrophysics Data System (ADS)

    Wang, Xin; Wong, Brian Stephen; Guan, Tui Chen

    2005-04-01

    The x-ray radiographic testing method is often used for detecting defects as a non-destructive testing method (NDT). In many cases, NDT is used for aircraft components, welds, etc. Hence, the backgrounds are always more complex than a piece of steel. Radiographic images are low contrast, dark and high noise image. It is difficult to detect defects directly. So, image enhancement is a significant part of automated radiography inspection system. Histogram equalization and median filter are the most frequently used techniques to enhance the radiographic images. In this paper, the adaptive histogram equalization and contrast limited histogram equalization are compared with histogram equalization. The adaptive wavelet thresholding is compared with median filter. Through comparative analysis, the contrast limited histogram equalization and adaptive wavelet thresholding can enhance perception of defects better.

  10. Dental OCT

    NASA Astrophysics Data System (ADS)

    Colston, Bill W.; Sathyam, Ujwal S.; Dasilva, Luiz B.; Everett, Matthew J.; Stroeve, Pieter; Otis, L. L.

    1998-09-01

    We present here the first in vivo optical coherence tomography (OCT) images of human dental tissue. A novel dental optical coherence tomography system has been developed. This system incorporates the interferometer sample arm and transverse scanning optics into a handpiece that can be used intraorally to image human dental tissues. The average imaging depth of this system varied from 3 mm in hard tissues to 1.5 mm in soft tissues. We discuss the application of this imaging system for dentistry and illustrate the potential of our dental OCT system for diagnosis of periodontal disease, detection of caries, and evaluation of dental restorations.

  11. Design of a streaked radiography instrument for ICF ablator tuning measurements.

    PubMed

    Olson, R E; Hicks, D G; Spears, B K; Celliers, P M; Holder, J P; Landen, O L; Geissel, M; Kellogg, J W; Bennett, G R; Edens, A D; Atherton, B W; Leeper, R J

    2008-10-01

    A streaked radiography diagnostic has been proposed as a technique to determine the ablator mass remaining in an inertial confinement fusion ignition capsule at peak velocity. This instrument, the "HXRI-5," has been designed to fit within a National Ignition Facility Diagnostic Instrument Manipulator. The HXRI-5 will be built at Sandia National Laboratories (SNL), and initial testing will be done at the SNL Z-Beamlet Facility. In this paper, we will describe the National Ignition Campaign requirements for this diagnostic, the instrument design, and the planned test experiments.

  12. Multi-purpose neutron radiography system

    SciTech Connect

    Barton, J.P.; Bryant, L.E.; Berry, P.

    1996-07-01

    A conceptual design is given for a low cost, multipurpose radiography system suited for the needs of the Los Alamos National Laboratory (LANL). The proposed neutron source is californium-252. One purpose is to provide an in-house capability for occasional, reactor quality, neutron radiography thus replacing the recently closed Omega-West Reactor. A second purpose is to provide a highly reliable standby transportable neutron radiography system. A third purpose is to provide for transportable neutron probe gamma spectroscopy techniques. The cost is minimized by shared use of an existing x-ray facility, and by use of an existing transport cask. The achievable neutron radiography and radioscopy performance characteristics have been verified. The demonstrated image qualities range from high resolution gadolinium - SR film, with L:D = 100:1, to radioscopy using a LIXI image with L:D = 30:1 and neutron fluence 3.4 x 10{sup 5} n/cm{sup 2}.

  13. Information extraction from muon radiography data

    SciTech Connect

    Borozdin, K. N.; Asaki, T. J.; Chartrand, R.; Hengartner, N. W.; Hogan, G. E.; Morris, C. L.; Priedhorsky, W. C.; Schirato, R.C.; Schultz, L. J.; Sottile, M. J.; Vixie, K. R.; Wohlberg, B. E.; Blanpied, G.

    2004-01-01

    Scattering muon radiography was proposed recently as a technique of detection and 3-d imaging for dense high-Z objects. High-energy cosmic ray muons are deflected in matter in the process of multiple Coulomb scattering. By measuring the deflection angles we are able to reconstruct the configuration of high-Z material in the object. We discuss the methods for information extraction from muon radiography data. Tomographic methods widely used in medical images have been applied to a specific muon radiography information source. Alternative simple technique based on the counting of high-scattered muons in the voxels seems to be efficient in many simulated scenes. SVM-based classifiers and clustering algorithms may allow detection of compact high-Z object without full image reconstruction. The efficiency of muon radiography can be increased using additional informational sources, such as momentum estimation, stopping power measurement, and detection of muonic atom emission.

  14. Corrosion Inhibitors as Penetrant Dyes for Radiography

    NASA Technical Reports Server (NTRS)

    Novak, Howard L.; Hall, Phillip B.

    2003-01-01

    Liquid/vapor-phase corrosion inhibitors (LVCIs) have been found to be additionally useful as penetrant dyes for neutron radiography (and perhaps also x-radiography). Enhancement of radiographic contrasts by use of LVCIs can reveal cracks, corrosion, and other defects that may be undetectable by ultrasonic inspection, that are hidden from direct optical inspection, and/or that are difficult or impossible to detect in radiographs made without dyes.

  15. Motivations for muon radiography of active volcanoes

    NASA Astrophysics Data System (ADS)

    Macedonio, G.; Martini, M.

    2010-02-01

    Muon radiography represents an innovative tool for investigating the interior of active volcanoes. This method integrates the conventional geophysical techniques and provides an independent way to estimate the density of the volcano structure and reveal the presence of magma conduits. The experience from the pioneer experiments performed at Mt. Asama, Mt. West Iwate, and Showa-Shinzan (Japan) are very encouraging. Muon radiography could be applied, in principle, at any stratovolcano. Here we focus our attention on Vesuvius and Stromboli (Italy).

  16. Validation of a computed radiography device to monitor the HIV-1 RNase H activity

    NASA Astrophysics Data System (ADS)

    Esposito, F.; Fanti, V.; Marzeddu, R.; Randaccio, P.; Tramontano, E.; Zinzula, L.

    2009-08-01

    A commercially available computed radiography (CR) system for dental radiography was used to produce images from radiolabeled polyacrilamide gel electrophoresis (PAGE) assays. Typically, similar investigations require specific and expensive autoradiography devices. The CR unit was characterized in terms of sensitivity and fading by means of a 90Sr source that well simulates the experimental conditions, and then used for quantitative analyses of the human immunodeficiency virus type 1 (HIV-1) reverse transcriptase (RT) polymerase-independent ribonuclease H (RNase H) activity monitored by PAGE analysis. The results showed that the present methodology allows quantifying effectively the RNase H catalyses and that the obtained data are in good agreement with previous reference works. Finally, in order to further validate the present method in terms of relationship between enzyme activity, the rate of products formation and signal intensity, a PAGE analyses of the HIV-1 RNase H inhibition by the known diketo acid derivative RDS1643 was carried out.

  17. Patient dose monitoring in Dubai in radiography and interventional procedures.

    PubMed

    AlSuwaidi, J S; AlMazrouei, N K; Pottybindu, S; Siraj, M; Mathew, D; Al Blooshi, A A; Kuriakose, V P

    2015-06-01

    This paper presents ongoing actions in Dubai on patient dose monitoring in digital radiographic examinations, mammography, interventional procedures, and dental radiological procedures. The aim of Dubai Health Authority (DHA) is to move towards the establishment of local diagnostic reference levels. DHA has participated in national and regional projects under the umbrella of the International Atomic Energy Agency. The need for local radiation protection educational programmes and wider patient dosimetry monitoring and recording emerged from this work.

  18. Bone X-Ray (Radiography)

    MedlinePlus Videos and Cool Tools

    ... procedure. You may experience discomfort from the cool temperature in the examination room. You may also find ... the individual patient's condition. Ultrasound imaging, which uses sound waves instead of ionizing radiation to create diagnostic ...

  19. Effective exposure level and diagnostic performance in endodontic radiography

    SciTech Connect

    Okano, T.; Wiebe, J.D.; Webber, R.L.; Wagner, R.F.

    1983-05-01

    Image quality is limited by the information capacity of the image-forming system and can be computed from three parameters: contrast, resolution, and noise. These parameters can be combined to yield a single measure which determines the maximum amount of information obtainable from any x-ray system and is called the noise-equivalent number of quanta (NEQ) per unit area. The effects of image quality, expressed as noise-equivalent number of quanta (NEQ) per unit area, on the radiographic performance by dentists reading the position of an endodontic file in a root canal were studied. Three different speed films were used in conjunction with a fixed screen. Components of variance associated with the position of the tooth apex and the tip of an endodontic file in a root canal were compared for the effect of different NEQs and observers. Results show that the standard deviation in locating a file tip and tooth apex may be a linear function of log NEQ. These findings indicate that a significant reduction in exposure would have a relatively small effect on the precision of endodontic distance measurements.

  20. Diagnostic imaging in pediatric emergencies

    SciTech Connect

    Heller, R.M.; Coulam, C.M.; Allen, J.H.; Fleischer, A.; Lee, G.S.; Kirchner, S.G.; James A.E. Jr.

    1980-07-01

    Evaluation of pediatric emergencies by diagnostic imaging technics can involve both invasive and noninvasive procedures. Nuclear medicine, conventional radiography, ultrasound, computerized axial tomography, and xeroradiography are the major nonangiographic diagnostic technics available for patient evaluation. We will emphasize the use of computerized axial tomography, nuclear medicine, xeroradiography, and ultrasound in the evaluation of emergencies in the pediatric age group. Since the radiologist is the primary consultant with regard to diagnostic imaging, his knowledge of these modulities can greatly influence patient care and clinical results.

  1. Proton radiography for clinical applications

    NASA Astrophysics Data System (ADS)

    Talamonti, C.; Reggioli, V.; Bruzzi, M.; Bucciolini, M.; Civinini, C.; Marrazzo, L.; Menichelli, D.; Pallotta, S.; Randazzo, N.; Sipala, V.; Cirrone, G. A. P.; Petterson, M.; Blumenkrantz, N.; Feldt, J.; Heimann, J.; Lucia, D.; Seiden, A.; Williams, D. C.; Sadrozinski, H. F.-W.; Bashkirov, V.; Schulte, R.

    2010-01-01

    Proton imaging is not yet applied as a clinical routine, although its advantages have been demonstrated. In the context of quality assurance in proton therapy, proton images can be used to verify the correct positioning of the patient and to control the range of protons. Proton computed tomography (pCT) is a 3D imaging method appropriate for planning and verification of proton radiation treatments, because it allows evaluating the distributions of proton stopping power within the tissues and can be directly utilized when the patient is in the actual treatment position. The aim of the PRoton IMAging experiment, supported by INFN, and the PRIN 2006 project, supported by MIUR, is to realize a proton computed radiography (pCR) prototype for reconstruction of proton images from a single projection in order to validate the technique with pre-clinical studies and, eventually, to conceive the configuration of a complete pCT system. A preliminary experiment performed at the 250 MeV proton synchrotron of Loma Linda University Medical Center (LLUMC) allowed acquisition of experimental data before the completion of PRIMA project's prototype. In this paper, the results of the LLUMC experiment are reported and the reconstruction of proton images of two phantoms is discussed.

  2. Mobile real time radiography system

    SciTech Connect

    Vigil, J.; Taggart, D.; Betts, S.

    1997-11-01

    A 450-keV Mobile Real Time Radiography (RTR) System was delivered to Los Alamos National Laboratory (LANL) in January 1996. It was purchased to inspect containers of radioactive waste produced at (LANL). Since its delivery it has been used to radiograph more than 600 drums of radioactive waste at various LANL sites. It has the capability of inspecting waste containers of various sizes from <1-gal. buckets up to standard waste boxes (SWB, dimensions 54.5 in. x 71 in. x 37 in.). It has three independent x-ray acquisition formats. The primary system used is a 12- in. image intensifier, the second is a 36-in. linear diode array (LDA) and the last is an open system. It is fully self contained with on board generator, HVAC, and a fire suppression system. It is on a 53-ft long x 8-ft. wide x 14-ft. high trailer that can be moved over any highway requiring only an easily obtainable overweight permit because it weights {approximately}38 tons. It was built to conform to industry standards for a cabinet system which does not require an exclusion zone. The fact that this unit is mobile has allowed us to operate where the waste is stored, rather than having to move the waste to a fixed facility.

  3. Thorium-uranium fission radiography

    NASA Technical Reports Server (NTRS)

    Haines, E. L.; Weiss, J. R.; Burnett, D. S.; Woolum, D. S.

    1976-01-01

    Results are described for studies designed to develop routine methods for in-situ measurement of the abundance of Th and U on a microscale in heterogeneous samples, especially rocks, using the secondary high-energy neutron flux developed when the 650 MeV proton beam of an accelerator is stopped in a 42 x 42 cm diam Cu cylinder. Irradiations were performed at three different locations in a rabbit tube in the beam stop area, and thick metal foils of Bi, Th, and natural U as well as polished silicate glasses of known U and Th contents were used as targets and were placed in contact with mica which served as a fission track detector. In many cases both bare and Cd-covered detectors were exposed. The exposed mica samples were etched in 48% HF and the fission tracks counted by conventional transmitted light microscopy. Relative fission cross sections are examined, along with absolute Th track production rates, interaction tracks, and a comparison of measured and calculated fission rates. The practicality of fast neutron radiography revealed by experiments to data is discussed primarily for Th/U measurements, and mixtures of other fissionable nuclei are briefly considered.

  4. Correlation of the clinical and physical image quality in chest radiography for average adults with a computed radiography imaging system

    PubMed Central

    Wood, T J; Beavis, A W; Saunderson, J R

    2013-01-01

    Objective: The purpose of this study was to examine the correlation between the quality of visually graded patient (clinical) chest images and a quantitative assessment of chest phantom (physical) images acquired with a computed radiography (CR) imaging system. Methods: The results of a previously published study, in which four experienced image evaluators graded computer-simulated postero-anterior chest images using a visual grading analysis scoring (VGAS) scheme, were used for the clinical image quality measurement. Contrast-to-noise ratio (CNR) and effective dose efficiency (eDE) were used as physical image quality metrics measured in a uniform chest phantom. Although optimal values of these physical metrics for chest radiography were not derived in this work, their correlation with VGAS in images acquired without an antiscatter grid across the diagnostic range of X-ray tube voltages was determined using Pearson’s correlation coefficient. Results: Clinical and physical image quality metrics increased with decreasing tube voltage. Statistically significant correlations between VGAS and CNR (R=0.87, p<0.033) and eDE (R=0.77, p<0.008) were observed. Conclusion: Medical physics experts may use the physical image quality metrics described here in quality assurance programmes and optimisation studies with a degree of confidence that they reflect the clinical image quality in chest CR images acquired without an antiscatter grid. Advances in knowledge: A statistically significant correlation has been found between the clinical and physical image quality in CR chest imaging. The results support the value of using CNR and eDE in the evaluation of quality in clinical thorax radiography. PMID:23568362

  5. 3D imaging of dental hard tissues with Fourier domain optical coherence tomography

    NASA Astrophysics Data System (ADS)

    Chen, Yueli L.; Yang, Yi; Ma, Jing; Yan, Jun; Shou, Yuanxin; Wang, Tianheng; Ramesh, Aruna; Zhao, Jing; Zhu, Quing

    2011-03-01

    A fiber optical coherence tomography (OCT) probe is used for three dimensional dental imaging. The probe has a lightweight miniaturized design with a size of a pen to facilitate clinic in vivo diagnostics. The probe is interfaced with a swept-source / Fourier domain optical coherence tomography at 20K axial scanning rate. The tooth samples were scanned from occlusal, buccal, lingual, mesial, and distal orientations. Three dimensional imaging covers tooth surface area up to 10 mm x 10 mm with a depth about 5 mm, where a majority of caries affection occurs. OCT image provides better resolution and contrast compared to gold standard dental radiography (X-ray). In particular, the technology is well suited for occlusal caries detection. This is complementary to X-ray as occlusal caries affection is difficult to be detected due to the X-ray projectile scan geometry. The 3D topology of occlusal surface as well as the dentin-enamel junction (DEJ) surface inside the tooth can be visualized. The lesion area appears with much stronger back scattering signal intensity.

  6. Dental sepsis.

    PubMed

    Mueller, P O; Lowder, M Q

    1998-08-01

    Dental sepsis or periapical abscess formation constitutes a large percentage of dental conditions that afflict horses. Dental sepsis occurs when the pulp chamber of the tooth is exposed to the oral cavity or external environment, allowing bacterial localization with resulting infection. Although acute, primary, septic pulpitis in horses is rare, dental sepsis often results from colonization of the pulp chamber with pathogenic bacteria secondary to maleruption or impaction of teeth with secondary alveolar bone lysis, primary fractures of the tooth, mandible, or maxilla, periodontal disease, or infundibular necrosis. The sequela to pulpal infection are extensions into the periradicular tissues and mandibular or maxillary periapical abscess formation.

  7. The need for skull radiography in patients presenting for CT

    SciTech Connect

    Tress, B.M.

    1983-01-01

    One thousand patients had both CT of the head and a conventional skull series of radiographs. Radiographic findings were abnormal in 250 patients (25%), but only 64 patients (6.4%) had diagnostically significant abnormalities at radiography that were not detected by CT. If the 163 patients who presented after acute trauma were excluded from the series, only 39 (4.7%) of the remaining patients had radiographically significant abnormal findings that were not seen at CT, and only two (0.2%) of these abnormalities could not be diagnosed by a lateral skull radiograph alone. In only five patients (0.5%) was the management actively changed because an abnormaltiy that was detected at skull radiography was not detected at CT. Thus, in nontrauma patients who have stroke, epilepsy, dementia, or non-specific symptoms without focal signs, or have recently undergone craniotomy, and who have been referred for CT, skull radiographs are not justified. In the patient with a history and findings that are strongly suggestive of a pathological disorder anywhere other than in the sella turcica, cerebello-pontine angle, and paranasal sinuses, only the lateral skull radiograph should be obtained after CT, and only if CT is equivocal.

  8. Subtraction radiography for the diagnosis of bone lesions in dogs. Report for 1982-1984

    SciTech Connect

    Rethman, M.P.; Ruttiman, U.E.; O'Neal, R.B.; Webber, R.L.; Davis, A.A.

    1984-05-31

    Resolution of osseous wounds utilizing conventional radiographic techniques is dependent upon favorable angulation without superimposition of dense anatomical structures. A technique of computer subtraction utilizing sequential radiographs has been demonstrated to enhance visualization of such defects in dry skulls, but usefulness in live animals had heretofore not been demonstrated. This investigation demonstrated the usefulness of computer subtraction radiography in live animals, both error rate and diagnostic time being reduced significantly.

  9. 21 CFR 872.1820 - Dental x-ray exposure alignment device.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Dental x-ray exposure alignment device. 872.1820... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1820 Dental x-ray exposure alignment device. (a) Identification. A dental x-ray exposure alignment device is a device intended to position...

  10. 21 CFR 872.1840 - Dental x-ray position indicating device.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Dental x-ray position indicating device. 872.1840... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1840 Dental x-ray position indicating device. (a) Identification. A dental x-ray position indicating device is a device, such as a...

  11. 21 CFR 872.1820 - Dental x-ray exposure alignment device.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Dental x-ray exposure alignment device. 872.1820... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1820 Dental x-ray exposure alignment device. (a) Identification. A dental x-ray exposure alignment device is a device intended to position...

  12. 21 CFR 872.1820 - Dental x-ray exposure alignment device.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Dental x-ray exposure alignment device. 872.1820... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1820 Dental x-ray exposure alignment device. (a) Identification. A dental x-ray exposure alignment device is a device intended to position...

  13. 21 CFR 872.1840 - Dental x-ray position indicating device.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Dental x-ray position indicating device. 872.1840... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1840 Dental x-ray position indicating device. (a) Identification. A dental x-ray position indicating device is a device, such as a...

  14. 21 CFR 872.1840 - Dental x-ray position indicating device.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental x-ray position indicating device. 872.1840... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1840 Dental x-ray position indicating device. (a) Identification. A dental x-ray position indicating device is a device, such as a...

  15. 21 CFR 872.1840 - Dental x-ray position indicating device.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Dental x-ray position indicating device. 872.1840... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1840 Dental x-ray position indicating device. (a) Identification. A dental x-ray position indicating device is a device, such as a...

  16. 21 CFR 872.1820 - Dental x-ray exposure alignment device.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Dental x-ray exposure alignment device. 872.1820... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1820 Dental x-ray exposure alignment device. (a) Identification. A dental x-ray exposure alignment device is a device intended to position...

  17. 21 CFR 872.1840 - Dental x-ray position indicating device.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Dental x-ray position indicating device. 872.1840... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1840 Dental x-ray position indicating device. (a) Identification. A dental x-ray position indicating device is a device, such as a...

  18. 21 CFR 872.1820 - Dental x-ray exposure alignment device.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental x-ray exposure alignment device. 872.1820... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1820 Dental x-ray exposure alignment device. (a) Identification. A dental x-ray exposure alignment device is a device intended to position...

  19. Muon radiography for exploration of Mars geology

    NASA Astrophysics Data System (ADS)

    Kedar, S.; Tanaka, H. K. M.; Naudet, C. J.; Jones, C. E.; Plaut, J. P.; Webb, F. H.

    2013-06-01

    Muon radiography is a technique that uses naturally occurring showers of muons (penetrating particles generated by cosmic rays) to image the interior of large-scale geological structures in much the same way as standard X-ray radiography is used to image the interior of smaller objects. Recent developments and application of the technique to terrestrial volcanoes have demonstrated that a low-power, passive muon detector can peer deep into geological structures up to several kilometers in size, and provide crisp density profile images of their interior at ten meter scale resolution. Preliminary estimates of muon production on Mars indicate that the near horizontal Martian muon flux, which could be used for muon radiography, is as strong or stronger than that on Earth, making the technique suitable for exploration of numerous high priority geological targets on Mars. The high spatial resolution of muon radiography also makes the technique particularly suited for the discovery and delineation of Martian caverns, the most likely planetary environment for biological activity. As a passive imaging technique, muon radiography uses the perpetually present background cosmic ray radiation as the energy source for probing the interior of structures from the surface of the planet. The passive nature of the measurements provides an opportunity for a low power and low data rate instrument for planetary exploration that could operate as a scientifically valuable primary or secondary instrument in a variety of settings, with minimal impact on the mission's other instruments and operation.

  20. Muon radiography for exploration of Mars geology

    NASA Astrophysics Data System (ADS)

    Kedar, S.; Tanaka, H. K. M.; Naudet, C. J.; Jones, C. E.; Plaut, J. P.; Webb, F. H.

    2012-10-01

    Muon radiography is a technique that uses naturally occurring showers of muons (penetrating particles generated by cosmic rays) to image the interior of large scale geological structures in much the same way as standard X-ray radiography is used to image the interior of smaller objects. Recent developments and application of the technique to terrestrial volcanoes have demonstrated that a low-power, passive muon detector can peer deep into geological structures up to several kilometers in size, and provide crisp density profile images of their interior at ten meter scale resolution. Preliminary estimates of muon production on Mars indicate that the near horizontal Martian muon flux, which could be used for muon radiography, is as strong or stronger than that on Earth, making the technique suitable for exploration of numerous high priority geological targets on Mars. The high spatial resolution of muon radiography also makes the technique particularly suited for the discovery and delineation of Martian caverns, the most likely planetary environment for biological activity. As a passive imaging technique, muon radiography uses the perpetually present background cosmic ray radiation as the energy source for probing the interior of structures from the surface of the planet. The passive nature of the measurements provides an opportunity for a low power and low data rate instrument for planetary exploration that could operate as a scientifically valuable primary or secondary instrument in a variety of settings, with minimal impact on the mission's other instruments and operation.

  1. Dental Hygienist.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of dental hygienist, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general and 9 units specific to the occupation of dental hygienist. The following skill areas are covered in…

  2. Dental Implants.

    PubMed

    Zohrabian, Vahe M; Sonick, Michael; Hwang, Debby; Abrahams, James J

    2015-10-01

    Dental implants restore function to near normal in partially or completely edentulous patients. A root-form implant is the most frequently used type of dental implant today. The basis for dental implants is osseointegration, in which osteoblasts grow and directly integrate with the surface of titanium posts surgically embedded into the jaw. Radiologic assessment is critical in the preoperative evaluation of the dental implant patient, as the exact height, width, and contour of the alveolar ridge must be determined. Moreover, the precise locations of the maxillary sinuses and mandibular canals, as well as their relationships to the site of implant surgery must be ascertained. As such, radiologists must be familiar with implant design and surgical placement, as well as augmentation procedures utilized in those patients with insufficient bone in the maxilla and mandible to support dental implants.

  3. Dental MRI using wireless intraoral coils

    PubMed Central

    Ludwig, Ute; Eisenbeiss, Anne-Katrin; Scheifele, Christian; Nelson, Katja; Bock, Michael; Hennig, Jürgen; von Elverfeldt, Dominik; Herdt, Olga; Flügge, Tabea; Hövener, Jan-Bernd

    2016-01-01

    Currently, the gold standard for dental imaging is projection radiography or cone-beam computed tomography (CBCT). These methods are fast and cost-efficient, but exhibit poor soft tissue contrast and expose the patient to ionizing radiation (X-rays). The need for an alternative imaging modality e.g. for soft tissue management has stimulated a rising interest in dental magnetic resonance imaging (MRI) which provides superior soft tissue contrast. Compared to X-ray imaging, however, so far the spatial resolution of MRI is lower and the scan time is longer. In this contribution, we describe wireless, inductively-coupled intraoral coils whose local sensitivity enables high resolution MRI of dental soft tissue. In comparison to CBCT, a similar image quality with complementary contrast was obtained ex vivo. In-vivo, a voxel size of the order of 250∙250∙500 μm3 was achieved in 4 min only. Compared to dental MRI acquired with clinical equipment, the quality of the images was superior in the sensitive volume of the coils and is expected to improve the planning of interventions and monitoring thereafter. This method may enable a more accurate dental diagnosis and avoid unnecessary interventions, improving patient welfare and bringing MRI a step closer to becoming a radiation-free alternative for dental imaging. PMID:27021387

  4. Dental MRI using wireless intraoral coils

    NASA Astrophysics Data System (ADS)

    Ludwig, Ute; Eisenbeiss, Anne-Katrin; Scheifele, Christian; Nelson, Katja; Bock, Michael; Hennig, Jürgen; von Elverfeldt, Dominik; Herdt, Olga; Flügge, Tabea; Hövener, Jan-Bernd

    2016-03-01

    Currently, the gold standard for dental imaging is projection radiography or cone-beam computed tomography (CBCT). These methods are fast and cost-efficient, but exhibit poor soft tissue contrast and expose the patient to ionizing radiation (X-rays). The need for an alternative imaging modality e.g. for soft tissue management has stimulated a rising interest in dental magnetic resonance imaging (MRI) which provides superior soft tissue contrast. Compared to X-ray imaging, however, so far the spatial resolution of MRI is lower and the scan time is longer. In this contribution, we describe wireless, inductively-coupled intraoral coils whose local sensitivity enables high resolution MRI of dental soft tissue. In comparison to CBCT, a similar image quality with complementary contrast was obtained ex vivo. In-vivo, a voxel size of the order of 250•250•500 μm3 was achieved in 4 min only. Compared to dental MRI acquired with clinical equipment, the quality of the images was superior in the sensitive volume of the coils and is expected to improve the planning of interventions and monitoring thereafter. This method may enable a more accurate dental diagnosis and avoid unnecessary interventions, improving patient welfare and bringing MRI a step closer to becoming a radiation-free alternative for dental imaging.

  5. Dental abscess: A microbiological review

    PubMed Central

    Shweta; Prakash, S Krishna

    2013-01-01

    Dental abscess is a frequently occurring infectious process known to the health practice. The fate of the infection depends on the virulence of the bacteria, host resistance factors, and regional anatomy. Serious consequences arising from the spread of a dental abscess lead to significant morbidity and mortality. Acute dental abscess is polymicrobial, comprising of strict anaerobes, such as anaerobic cocci, Prevotella, Fusobacterium species, and facultative anaerobes, such as viridans group streptococci and the Streptococcus anginosus group. Numerous novel, uncultivable and fastidious organisms have been identified as potential pathogens with the use of non-culture techniques. The majority of localized dental abscesses respond to surgical treatment while the use of antimicrobials is limited to severe spreading infections. There is a need for good-quality clinical trials of sufficient size to identify the ideal treatment. The microbiology of the acute dentoalveolar abscess and its treatment in the light of improved culture and diagnostic methods are reviewed. PMID:24348613

  6. Mosquitoes, flies and dental cavities: Dr. Howard Riley Raper's public campaign to prevent toothache.

    PubMed

    Christen, Arden G; Christen, Joan A

    2010-01-01

    Dr. Howard Riley Raper (1886-1978) was an early oral health pioneer and dental roentgenology faculty member of the Indiana Dental College (IDC) who single-handedly introduced key concepts in radiology to dentistry. Due to his efforts, IDC became in 1910-11 the first dental school to have a regular course in dental radiology. Virtually all American dental schools soon added this subject to their regular curriculum. Raper's text, Elementary and Dental Radiography (1913) became the first comprehensive student textbook of dental X-ray diagnosis. In his 1933 Blue Book entitled, The New Aim in the Care of the Teeth, Raper elaborated upon his mission to prevent caries, by comparing the insidious damages of tooth decay with the threat of insect-borne disease.

  7. Mobile waste inspection real time radiography system

    SciTech Connect

    Vigil, J.; Taggart, D.; Betts, S.; Rael, C.; Martinez, F.; Mendez, J.

    1995-10-01

    The 450-KeV Mobile Real Time Radiography System was designed and purchased to inspect containers of radioactive waste produced at Los Alamos National Laboratory (LANL). The Mobile Real Time Radiography System has the capability of inspecting waste containers of various sizes from 5-gal. buckets to standard waste boxes (SWB, dimensions 54.5 in. x 71 in. x 37 in.). The fact that this unit is mobile makes it an attractive alternative to the costly road closures associated with moving waste from the waste generator to storage or disposal facilities.

  8. Proton Radiography: Its uses and Resolution Scaling

    SciTech Connect

    Mariam, Fesseha G.

    2012-08-09

    Los Alamos National Laboratory has used high energy protons as a probe in flash radiography for over a decade. In this time the proton radiography project has used 800 MeV protons, provided by the LANSCE accelerator facility at LANL, to diagnose over five-hundred dynamic experiments in support of stockpile stewardship programs as well as basic materials science. Through this effort significant experience has been gained in using charged particles as direct radiographic probes to diagnose transient systems. The results of this experience will be discussed through the presentation of data from experiments recently performed at the LANL pRad.

  9. Californium-252: A New Isotopic Source for Neutron Radiography

    SciTech Connect

    Reinig, W.C.

    2001-08-29

    This report discusses a new isotopic source for neutron radiography, Californium-252. Nuclear reactors are the usual source of neutrons for radiography, primarily because of their intense neutron beams. If neutron radiography is to have widespread use, intense transportable neutron sources are required that can be used in plants, in laboratories and in the field.

  10. Digital radiography. A comparison with modern conventional imaging

    PubMed Central

    Bansal, G J

    2006-01-01

    The development of computed radiography over the past two decades has transformed radiological imaging. The radiology departments in the 21st century will look very different from those in the preceding period. In this review, the development of digital radiography is presented with a description of its various forms and a comparison with screen film radiography. PMID:16822918

  11. Sensitometric characteristics of dental xeroradiography

    SciTech Connect

    Gratt, B.M.; Sickles, E.A.

    1983-11-01

    Dental xeroradiography is a high-quality intraoral imaging system which provides a potentially convenient, rapid, low-dose alternative to conventional film radiography. In this study the sensitometric properties of dental xeroradiography were investigated via assessment of high- and low-contrast xeroradiographic processor settings, transmission versus reflection densitometry, reciprocity-law failure, and kVp (tube voltage) plate dependence. Findings of the study indicated that imaging at high-contrast processor settings results in greater dynamic range but less exposure latitude than imaging at low-contrast processor settings. Determination of characteristic curves demonstrated greater contrast in reflection mode than imaging by transillumination for all but the very densest of images (greater than 1.6 O.D.). There was also little difference in characteristic curves produced from 50 to 90 kVp, indicating that the xeroradiographic plate exhibits a relatively constant sensitivity over the tube voltages tested if exposure is expressed in roentgens. Finally, no substantial reciprocity-law failure was observed for dental xeroradiography over a clinically relevant range of exposure times.

  12. Comparison between DICOM-calibrated and uncalibrated consumer grade and 6-MP displays under different lighting conditions in panoramic radiography

    PubMed Central

    Haapea, M; Liukkonen, E; Huumonen, S; Tervonen, O; Nieminen, M T

    2015-01-01

    Objectives: To compare observer performance in the detection of anatomical structures and pathology in panoramic radiographs using consumer grade with and without digital imaging and communication in medicine (DICOM)-calibration and 6-megapixel (6-MP) displays under different lighting conditions. Methods: 30 panoramic radiographs were randomly evaluated on three displays under bright (510 lx) and dim (16 lx) ambient lighting by two observers with different years of experience. Dentinoenamel junction, dentinal caries and periapical inflammatory lesions, visibility of cortical border of the floor and pathological lesions in maxillary sinus were evaluated. Consensus between the observers was considered as reference. Intraobserver agreement was determined. Proportion of equivalent ratings and weighted kappa were used to assess reliability. The level of significance was set to p < 0.05. Results: The proportion of equivalent ratings with consensus differed between uncalibrated and DICOM-calibrated consumer grade displays in dentinal caries in the lower molar in dim lighting (p = 0.021) and between DICOM-calibrated consumer grade and 6-MP display in bright lighting (p = 0.038) for an experienced observer. Significant differences were found between uncalibrated and DICOM-calibrated consumer grade displays in dentinal caries in bright lighting (p = 0.044) and periapical lesions in the upper molar in dim lighting (p = 0.008) for a less experienced observer. Intraobserver reliability was better at detecting dentinal caries than at detecting periapical and maxillary sinus pathology. Conclusions: DICOM calibration may improve observer performance in panoramic radiography in different lighting conditions. Therefore, a DICOM-calibrated consumer grade display can be used instead of a medical display in dental practice without compromising the diagnostic quality. PMID:25564888

  13. Optical detection dental disease using polarized light

    DOEpatents

    Everett, Matthew J.; Colston, Jr., Billy W.; Sathyam, Ujwal S.; Da Silva, Luiz B.; Fried, Daniel

    2003-01-01

    A polarization sensitive optical imaging system is used to detect changes in polarization in dental tissues to aid the diagnosis of dental disease such as caries. The degree of depolarization is measured by illuminating the dental tissue with polarized light and measuring the polarization state of the backscattered light. The polarization state of this reflected light is analyzed using optical polarimetric imaging techniques. A hand-held fiber optic dental probe is used in vivo to direct the incident beam to the dental tissue and collect the reflected light. To provide depth-resolved characterization of the dental tissue, the polarization diagnostics may be incorporated into optical coherence domain reflectometry and optical coherence tomography (OCDR/OCT) systems, which enables identification of subsurface depolarization sites associated with demineralization of enamel or bone.

  14. Registered Dental Hygienists as Dental Students.

    ERIC Educational Resources Information Center

    Arnold, Janet; Shugars, Daniel A.

    1985-01-01

    Surveys conducted to (1) investigate why dental hygienists choose to become dentists, (2) evaluate their success in dental school, (3) assess the experience of those who had entered dental school, and (4) gauge the level of interest among dental hygienists in applying to dental school are discussed. (Author/MLW)

  15. Dental sealants

    MedlinePlus

    ... few quick steps. There is no drilling or scraping of the molars. Your dentist will: Clean the ... Dental sealants. Updated October 19, 2016. ADA.org Web site. www.ada.org/en/member-center/oral- ...

  16. Dental Sealants

    MedlinePlus

    ... form does not collect any actual information. External Web Site Policy This graphic notice ( ) means that you are ... the link. Home Contact Us Viewers and Players Site Map FOIA Web Policies Privacy Policy National Institute of Dental and ...

  17. Monochromatic x-ray radiography for areal-density measurement of inertial fusion energy fuel in fast ignition experiment.

    PubMed

    Fujioka, Shinsuke; Fujiwara, Takashi; Tanabe, Minoru; Nishimura, Hiroaki; Nagatomo, Hideo; Ohira, Shinji; Inubushi, Yuichi; Shiraga, Hiroyuki; Azechi, Hiroshi

    2010-10-01

    Ultrafast, two-dimensional x-ray imaging is an important diagnostics for the inertial fusion energy research, especially in investigating implosion dynamics at the final stage of the fuel compression. Although x-ray radiography was applied to observing the implosion dynamics, intense x-rays emitted from the high temperature and dense fuel core itself are often superimposed on the radiograph. This problem can be solved by coupling the x-ray radiography with monochromatic x-ray imaging technique. In the experiment, 2.8 or 5.2 keV backlight x-rays emitted from laser-irradiated polyvinyl chloride or vanadium foils were selectively imaged by spherically bent quartz crystals with discriminating the out-of-band emission from the fuel core. This x-ray radiography system achieved 24 μm and 100 ps of spatial and temporal resolutions, respectively.

  18. Monochromatic x-ray radiography for areal-density measurement of inertial fusion energy fuel in fast ignition experiment

    SciTech Connect

    Fujioka, Shinsuke; Fujiwara, Takashi; Tanabe, Minoru; Nishimura, Hiroaki; Nagatomo, Hideo; Ohira, Shinji; Shiraga, Hiroyuki; Azechi, Hiroshi; Inubushi, Yuichi

    2010-10-15

    Ultrafast, two-dimensional x-ray imaging is an important diagnostics for the inertial fusion energy research, especially in investigating implosion dynamics at the final stage of the fuel compression. Although x-ray radiography was applied to observing the implosion dynamics, intense x-rays emitted from the high temperature and dense fuel core itself are often superimposed on the radiograph. This problem can be solved by coupling the x-ray radiography with monochromatic x-ray imaging technique. In the experiment, 2.8 or 5.2 keV backlight x-rays emitted from laser-irradiated polyvinyl chloride or vanadium foils were selectively imaged by spherically bent quartz crystals with discriminating the out-of-band emission from the fuel core. This x-ray radiography system achieved 24 {mu}m and 100 ps of spatial and temporal resolutions, respectively.

  19. 75 FR 16511 - Pentron Clinical Technologies, a Wholly-Owned Subsidiary of Kerr Dental/Sybron Dental...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-01

    ... such as dental prosthetics, dental composites, dental impressions, dental adhesives, and other dental... prosthetics, dental composites, dental impressions, dental adhesives, and other dental materials to...

  20. Safety Testing of Industrial Radiography Devices

    SciTech Connect

    Trapp, D.J.

    1999-09-29

    The Nuclear Regulatory Commission contracted the Savannah River Technology Center to verify the relevancy of the 10 CFR Part 34 requirements for the normal use of portable gamma radiography systems and to propose recommendations for changes or modifications to the requirements.

  1. INDUSTRIAL RADIOGRAPHY COURSE, INSTRUCTORS' GUIDE. VOLUME 2.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Engineering Extension Service.

    INFORMATION RELATIVE TO THE LESSON PLANS IN "INDUSTRIAL RADIOGRAPHY COURSE, INSTRUCTOR'S GUIDE, VOLUME I" (VT 003 565) IS PRESENTED ON 52 INFORMATION SHEETS INCLUDING THE SUBJECTS SHIELDING EQUATIONS AND LOGARITHMS, METAL PROPERTIES, FIELD TRIP INSTRUCTIONS FOR STUDENTS, WELDING SYMBOLS AND SIZES, SAMPLE REPORT FORMS, AND TYPICAL SHIPPING…

  2. Film radiography -- The lone star of quality

    SciTech Connect

    Kochakian, R.

    1995-12-31

    In this year of 1995, 100 years of x-ray photography are being celebrated. The reason film radiography is still the number one NDT technique is because of its quality. In this paper the author discusses: (1) fundamentals of image quality and (2) status of new draft ASRM film system classification standard.

  3. Dental Emergencies

    PubMed Central

    Symington, J.M.

    1988-01-01

    Patients with dental emergencies sometimes present to their physician. This article outlines the role of the physician in the management of dental patients who have suffered traumatic injuries, postoperative hemorrhage, pain, and infection. It deals with those difficulties for which the physician may easily prescribe treatment and outlines the treatment that would be undertaken by a dentist who receives such a patient on referral. PMID:21253249

  4. Advanced imaging in equine dental disease.

    PubMed

    Selberg, Kurt; Easley, Jeremiah T

    2013-08-01

    Dental and sinus disorders are relatively common and of major clinical importance in equine medicine. Advanced diagnostic imaging has become an integral part of equine veterinary medicine. Advanced imaging has progressed the understanding, diagnosis, and treatment of dental- and sinus-related diseases. As a clinician, it is important to realize the value of advanced diagnostic imaging. Although computed tomography and magnetic resonance imaging are both significantly more expensive compared with other diagnostic tools, the financial cost of inaccurate diagnosis and treatment can often result in higher overall costs.

  5. Source characterization and modeling development for monoenergetic-proton radiography experiments on OMEGA

    SciTech Connect

    Manuel, M. J.-E.; Zylstra, A. B.; Rinderknecht, H. G.; Casey, D. T.; Rosenberg, M. J.; Sinenian, N.; Li, C. K.; Frenje, J. A.; Seguin, F. H.; Petrasso, R. D.

    2012-06-15

    A monoenergetic proton source has been characterized and a modeling tool developed for proton radiography experiments at the OMEGA [T. R. Boehly et al., Opt. Comm. 133, 495 (1997)] laser facility. Multiple diagnostics were fielded to measure global isotropy levels in proton fluence and images of the proton source itself provided information on local uniformity relevant to proton radiography experiments. Global fluence uniformity was assessed by multiple yield diagnostics and deviations were calculated to be {approx}16% and {approx}26% of the mean for DD and D{sup 3}He fusion protons, respectively. From individual fluence images, it was found that the angular frequencies of Greater-Than-Or-Equivalent-To 50 rad{sup -1} contributed less than a few percent to local nonuniformity levels. A model was constructed using the Geant4 [S. Agostinelli et al., Nuc. Inst. Meth. A 506, 250 (2003)] framework to simulate proton radiography experiments. The simulation implements realistic source parameters and various target geometries. The model was benchmarked with the radiographs of cold-matter targets to within experimental accuracy. To validate the use of this code, the cold-matter approximation for the scattering of fusion protons in plasma is discussed using a typical laser-foil experiment as an example case. It is shown that an analytic cold-matter approximation is accurate to within Less-Than-Or-Equivalent-To 10% of the analytic plasma model in the example scenario.

  6. Source characterization and modeling development for monoenergetic-proton radiography experiments on OMEGA

    NASA Astrophysics Data System (ADS)

    Manuel, M. J.-E.; Zylstra, A. B.; Rinderknecht, H. G.; Casey, D. T.; Rosenberg, M. J.; Sinenian, N.; Li, C. K.; Frenje, J. A.; Séguin, F. H.; Petrasso, R. D.

    2012-06-01

    A monoenergetic proton source has been characterized and a modeling tool developed for proton radiography experiments at the OMEGA [T. R. Boehly et al., Opt. Comm. 133, 495 (1997)], 10.1016/S0030-4018(96)00325-2 laser facility. Multiple diagnostics were fielded to measure global isotropy levels in proton fluence and images of the proton source itself provided information on local uniformity relevant to proton radiography experiments. Global fluence uniformity was assessed by multiple yield diagnostics and deviations were calculated to be ˜16% and ˜26% of the mean for DD and D3He fusion protons, respectively. From individual fluence images, it was found that the angular frequencies of ≳50 rad-1 contributed less than a few percent to local nonuniformity levels. A model was constructed using the Geant4 [S. Agostinelli et al., Nuc. Inst. Meth. A 506, 250 (2003)], 10.1016/S0168-9002(03)01368-8 framework to simulate proton radiography experiments. The simulation implements realistic source parameters and various target geometries. The model was benchmarked with the radiographs of cold-matter targets to within experimental accuracy. To validate the use of this code, the cold-matter approximation for the scattering of fusion protons in plasma is discussed using a typical laser-foil experiment as an example case. It is shown that an analytic cold-matter approximation is accurate to within ≲10% of the analytic plasma model in the example scenario.

  7. A computer-assisted systematic quality monitoring method for cervical hip fracture radiography

    PubMed Central

    Laurin, Olof; Johnsson, Ragnar; Laurin, Sven

    2016-01-01

    Background A thorough quality analysis of radiologic performance is cumbersome. Instead, the prevalence of missed cervical hip fractures might be used as a quality indicator. Purpose To validate a computer-based quality study of cervical hip fracture radiography. Material and Methods True and false negative and positive hip trauma radiography during 6 years was assessed manually. Patients with two or more radiologic hip examinations before surgery were selected by computer analysis of the databases. The first of two preoperative examinations might constitute a missed fracture. These cases were reviewed. Results Out of 1621 cervical hip fractures, manual perusal found 51 (3.1%) false negative radiographic diagnoses. Among approximately 14,000 radiographic hip examinations, there were 27 (0.2%) false positive diagnoses. Fifty-seven percent of false negative reports were occult fractures, the other diagnostic mistakes. There were no significant differences over the years. Diagnostic sensitivity was 96.9% and specificity 99.8%. Computer-assisted analysis with a time interval of at least 120 days between the first and the second radiographic examination discovered 39 of the 51 false negative reports. Conclusion Cervical hip trauma radiography has high sensitivity and specificity. With computer-assisted analysis, 76% of false negative reports were found. PMID:27994880

  8. Source characterization and modeling development for monoenergetic-proton radiography experiments on OMEGA.

    PubMed

    Manuel, M J-E; Zylstra, A B; Rinderknecht, H G; Casey, D T; Rosenberg, M J; Sinenian, N; Li, C K; Frenje, J A; Séguin, F H; Petrasso, R D

    2012-06-01

    A monoenergetic proton source has been characterized and a modeling tool developed for proton radiography experiments at the OMEGA [T. R. Boehly et al., Opt. Comm. 133, 495 (1997)] laser facility. Multiple diagnostics were fielded to measure global isotropy levels in proton fluence and images of the proton source itself provided information on local uniformity relevant to proton radiography experiments. Global fluence uniformity was assessed by multiple yield diagnostics and deviations were calculated to be ∼16% and ∼26% of the mean for DD and D(3)He fusion protons, respectively. From individual fluence images, it was found that the angular frequencies of ≳50 rad(-1) contributed less than a few percent to local nonuniformity levels. A model was constructed using the Geant4 [S. Agostinelli et al., Nuc. Inst. Meth. A 506, 250 (2003)] framework to simulate proton radiography experiments. The simulation implements realistic source parameters and various target geometries. The model was benchmarked with the radiographs of cold-matter targets to within experimental accuracy. To validate the use of this code, the cold-matter approximation for the scattering of fusion protons in plasma is discussed using a typical laser-foil experiment as an example case. It is shown that an analytic cold-matter approximation is accurate to within ≲10% of the analytic plasma model in the example scenario.

  9. Conventional Versus Digital Radiography in Detecting Root Canal Type in Maxillary Premolars: An in Vitro Study

    PubMed Central

    Moshfeghi, Mahkameh; Sajadi, Soodabeh Sadat; Sajadi, Sepideh; Shahbazian, Majid

    2013-01-01

    Objective: Successful endodontic therapy depends on adequate mechanical and chemical debridement of the canal which requires knowledge of the canal morphology. Conventional radiography has been used to evaluate the canal type; however, direct digital radiography has recently been practiced for this purpose due to the shortcomings of conventional radiography. The aim of the present study was to compare the accuracy of digital and conventional radiography taken at 0° and 30° angles in the diagnosis of the canal type of extracted maxillary premolars. Materials and Methods: This diagnostic study was performed on 90 extracted maxillary premolars. Conventional and digital radiographies were taken of all teeth at 0° and 30° horizontal angles. The images were assessed by an oral and maxillofacial radiologist. The clearing technique was used as the gold standard. The canal type was determined using Weine classification. The agreement between each one of the 4 radiographic modalities and gold standard was determined by kappa statistics. Results: The kappa values for the agreement of parallel conventional, 30° conventional, parallel digital and 30° digital modalities with the clearing technique were 0.059, 0.215, 0.043 and 0.391, respectively. Parallel modalities were unable to determine the tooth canal type. Radiographic images taken at 30° significantly determined the canal type, although only a poor level of agreement was noted between the two modalities and the clearing technique. Conclusion: All modalities had limited value to determine the root canal type in maxillary premolars. However, direct digital imaging taken at 30° angle showed the highest accuracy for canal type assessment. PMID:23724205

  10. Salivary diagnostics

    PubMed Central

    Lee, J.M.; Garon, E.; Wong, D.T.

    2010-01-01

    The ability to monitor health status, disease onset and progression, and treatment outcome through non-invasive means is a most desirable goal in the health care promotion and delivery. There are three prerequisites to materialize this goal: specific biomarkers associated with a health or disease state; a non-invasive approach to detect and monitor the biomarkers; and the technologies to discriminate the biomarkers. A national initiative catalyzed by the National Institute of Dental & Craniofacial Research (NIDCR) has created a roadmap to achieve these goals through the use of oral fluids as the diagnostic medium to scrutinize the health and/or disease status of individuals. Progress has shown this is an ideal opportunity to bridge state of the art saliva-based biosensors, optimized to disease discriminatory salivary biomarkers, for diagnostic applications. Oral fluid being the ‘mirror of body’ is a perfect medium to be explored for health and disease surveillance. The translational applications and opportunities are enormous. PMID:19627522

  11. Oral and dental imaging equipment and techniques for small animals.

    PubMed

    Coffman, Curt R; Brigden, Glenn M

    2013-05-01

    In the diagnosis and treatment of oral and dental diseases in dogs and cats, digital intraoral radiography offers many advantages over the use of standard dental radiographic film, including rapid image generation, easier exposure correction, enhancement, and paperless storage. Digital image receptors can be divided into 2 main types, direct digital systems using charged coupled devices and complementary metal oxide semiconductor sensors, and indirect digital systems using phosphor plates with a computerized scanner. Each system is paired with a computer software system to allow handling, visualization, enhancement, sharing, and archiving of the images.

  12. Use of Digital Technology and Support Software Programs in the Private Dental Offices in Nevada

    ERIC Educational Resources Information Center

    Fattore-Bruno, LaDeane

    2009-01-01

    The purpose of this survey research was to determine the diffusion of digital radiography, the electronic oral health record (EOHR), digital intraoral photography, and diagnosis and clinical decision-making support software into the dental offices of Nevada. A cross-sectional survey design was utilized with a random sample of 600 Nevada dentists.…

  13. Hardware-Accelerated Simulated Radiography

    SciTech Connect

    Laney, D; Callahan, S; Max, N; Silva, C; Langer, S; Frank, R

    2005-08-04

    We present the application of hardware accelerated volume rendering algorithms to the simulation of radiographs as an aid to scientists designing experiments, validating simulation codes, and understanding experimental data. The techniques presented take advantage of 32-bit floating point texture capabilities to obtain solutions to the radiative transport equation for X-rays. The hardware accelerated solutions are accurate enough to enable scientists to explore the experimental design space with greater efficiency than the methods currently in use. An unsorted hexahedron projection algorithm is presented for curvilinear hexahedral meshes that produces simulated radiographs in the absorption-only regime. A sorted tetrahedral projection algorithm is presented that simulates radiographs of emissive materials. We apply the tetrahedral projection algorithm to the simulation of experimental diagnostics for inertial confinement fusion experiments on a laser at the University of Rochester.

  14. Assessing the current state of dental informatics in saudi arabia: the new frontier.

    PubMed

    Al-Nasser, Lubna; Al-Ehaideb, Ali; Househ, Mowafa

    2014-01-01

    Dental informatics is an emerging field that has the potential to transform the dental profession. This study aims to summarize the current applications of dental informatics in Saudi Arabia and to identify the challenges facing expansion of dental informatics in the Saudi context. Search for published articles and specialized forum entries was conducted, as well as interviews with dental professionals familiar with the topic. Results indicated that digital radiography/analysis and administrative management of dental practice are the commonest applications used. Applications in Saudi dental education included: web-based learning systems, computer-based assessments and virtual technology for clinical skills' teaching. Patients' education software, electronic dental/oral health records and the potential of dental research output from electronic databases are yet to be achieved in Saudi Arabia. Challenges facing Saudi dental informatics include: lack of IT infrastructure/support, social acceptability and financial cost. Several initiatives are taken towards the research in dental informatics. Still, more investments are needed to fully achieve the potential of various application of informatics in dental education, practice and research.

  15. Diagnosis of simulated condylar bone defects using panoramic radiography, spiral tomography and cone-beam computed tomography: A comparison study

    PubMed Central

    Salemi, Fatemeh; Shokri, Abbas; Baharvand, Maryam

    2015-01-01

    Objectives: Radiographic examination is one of the most important parts of the clinical assessment routine for temporomandibular disorders. The aim of this study was to compare the diagnostic accuracy of cone-beam computed tomography(CBCT) with panoramic radiography and spiral computed tomography for the detection of the simulated mandibular condyle bone lesions. Study Design: The sample consisted of 10 TMJs from 5 dried human skulls. Simulated erosive and osteophytic lesions were created in 3 different sizes using round diamond bur and bone chips, respectively. Panoramic radiography, spiral tomography and cone-beam computed tomography were used in defect detection. Data were statistically analyzed with the Mann-Whitney test. The reliability and degrees of agreement between two observers were also determined by the mean of Cohen’s Kappa analysis. Results: CBCT had a statistically significant superiority than other studied techniques in detection of both erosive and osteophytic lesions with different sizes. There were significant differences between tomography and panoramic in correct detection of both erosive and osteophytic lesions with 1mm and 1.5 mm in size. However, there were no significant differences between Tomography and Panoramic in correct detection of both erosive and osteophytic lesions with 0.5 mm in size. Conclusions: CBCT images provide a greater diagnostic accuracy than spiral tomography and panoramic radiography in the detection of condylar bone erosions and osteophytes. Key words:Bone defect, Condyle, CBCT, Panoramic, radiography. PMID:25810839

  16. Quantitative studies on inner interfaces in conical metal joints using hard x-ray inline phase contrast radiography

    NASA Astrophysics Data System (ADS)

    Zabler, S.; Rack, T.; Rack, A.; Nelson, K.

    2010-10-01

    Quantitative investigation of micrometer and submicrometer gaps between joining metal surfaces is applied to conical plug-socket connections in dental titanium implants. Microgaps of widths well beyond the resolving power of industrial x-ray systems are imaged by synchrotron phase contrast radiography. Furthermore, by using an analytical model for the relatively simple sample geometry and applying it to numerical forward simulations of the optical Fresnel propagation, we show that quantitative measurements of the microgap width down to 0.1 μm are possible. Image data recorded at the BAMline (BESSY-II light source, Germany) are presented, with the resolving power of the imaging system being 4 μm in absorption mode and ˜14 μm in phase contrast mode (z2=0.74 m). Thus, phase contrast radiography, combined with numerical forward simulations, is capable of measuring the widths of gaps that are two orders of magnitude thinner than the conventional detection limit.

  17. Dental Calculus Arrest of Dental Caries

    PubMed Central

    Keyes, Paul H.; Rams, Thomas E.

    2016-01-01

    Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993

  18. Monte Carlo calculation for microplanar beam radiography.

    PubMed

    Company, F Z; Allen, B J; Mino, C

    2000-09-01

    In radiography the scattered radiation from the off-target region decreases the contrast of the target image. We propose that a bundle of collimated, closely spaced, microplanar beams can reduce the scattered radiation and eliminate the effect of secondary electron dose, thus increasing the image dose contrast in the detector. The lateral and depth dose distributions of 20-200 keV microplanar beams are investigated using the EGS4 Monte Carlo code to calculate the depth doses and dose profiles in a 6 cm x 6 cm x 6 cm tissue phantom. The maximum dose on the primary beam axis (peak) and the minimum inter-beam scattered dose (valley) are compared at different photon energies and the optimum energy range for microbeam radiography is found. Results show that a bundle of closely spaced microplanar beams can give superior contrast imaging to a single macrobeam of the same overall area.

  19. Contrast enhancement in microplanar beam radiography.

    PubMed

    Company, F Z; Allen, B J; Mino, C

    1999-12-01

    In x-ray radiography, the target produces a useful shadow from absorption of the primary beam, while the scattered radiation into the off-target region decreases the contrast of the target image. A bundle of closely spaced microplanar beams can reduce the scattered radiation and give superior image contrast compared with a single macrobeam of the same dimensions. To further reduce the scattered radiation and increase the image contrast, we place an air gap between the tissue phantom and the detector. The primary and scattered photon flux of a single microplanar beam is measured as a function of thickness inside the phantom and in the air gap. Results show that a bundle of closely spaced, microplanar beams increase the image contrast by 22% and a 2 cm air gap decreases the scattered photon flux by about half, improving the contrast by an additional 16%. Thus an overall improvement of 41% in contrast can be achieved with microplanar beam radiography.

  20. A system for fast neutron radiography

    SciTech Connect

    Klann, R.T.

    1996-05-01

    A system has been designed and a neutron generator installed to perform fast neutron radiography. With this sytem, objects as small as a coin or as large as a waste drum can be radiographed. The neutron source is an MF Physics A-711 neutron generator which produces 3x10{sup 10} neutrons/second with an average energy of 14.5 MeV. The radiography system uses x-ray scintillation screens and film in commercially available cassettes. The cassettes have been modified to include a thin sheet of plastic to convert neutrons to protons through elastic scattering from hydrogen and other low Z materials in the plastic. For film densities from 1.8 to 3.0, exposures range from 1.9x10{sup 7} to 3.8x10{sup 8} n/cm{sup 2} depending on the type of screen and film.

  1. Dental Caries

    PubMed Central

    Burgess, Ralph C.

    1988-01-01

    Dental caries is one of the most prevalent diseases afflicting mankind. It reached a peak in the 1950s but has been declining drastically in recent years in children and young adults. This article describes the three contributing factors in dental caries: microbial plaque, tooth susceptibility, and diet, and discusses practical preventive measures which help to reduce caries incidence. Some of these, such as vaccines and antimicrobial varnishes, are still in the research stages, while others, such as sucrose substitutes, low-calorie sweeteners, and limitation of frequency of sugar snacks are well established and can be promoted by family physicians. PMID:21253193

  2. Digital radiography: Present detectors and future developments

    SciTech Connect

    Perez-Mendez, V.

    1990-08-01

    Present detectors for digital radiography are of two classes: real time detectors and storage (non real time) types. Present real time detectors consist of image intensifier tubes with an internal cesium iodide layer x-ray converter. Non real time detectors involve linear sweep arrays or storage detectors such as film. Future detectors discussed here can be of both types utilizing new technologies such as hydrogenated amorphous silicon photodiode arrays coupled to thin film transistor arrays. 17 refs., 10 figs.

  3. [Syncope in the dental environment].

    PubMed

    Findler, M; Elad, S; Garfunkel, A; Zusman, S P; Malamed, S F; Galili, D; Kaufman, E

    2002-01-01

    Syncope or Fainting is, by far, the most common emergency situation in the dental practice. Syncope is defined as an abrupt, transient, short term loss of consciousness and postural tone, followed by spontaneous and complete recovery. The pathophysiology of syncope consists of a sudden cessation or decrease in cerebral perfusion. Differential diagnosis of these medical conditions is of paramount importance in uncovering unrecognized systemic diseases. The dental team plays an important role in the process of establishing the correct diagnosis by its ability to recognize and document all the clinical symptoms and signs evident at the time of fainting. The dental surgeon is expected to be familiar with the various etiologies of syncope and should be able to differentiate between them. This article provides the essentials of the diagnostic procedure and an approach to the evaluation of the unconscious patient.

  4. Proton Radiography Peers into Metal Solidification

    DOE PAGES

    Clarke, Amy J.; Imhoff, Seth D.; Gibbs, Paul J.; ...

    2013-06-19

    Historically, metals are cut up and polished to see the structure and to infer how processing influences the evolution. We can now peer into a metal during processing without destroying it using proton radiography. Understanding the link between processing and structure is important because structure profoundly affects the properties of engineering materials. Synchrotron x-ray radiography has enabled real-time glimpses into metal solidification. However, x-ray energies favor the examination of small volumes and low density metals. In this study, we use high energy proton radiography for the first time to image a large metal volume (>10,000 mm3) during melting and solidification.more » We also show complementary x-ray results from a small volume (<1mm3), bridging four orders of magnitude. In conclusion, real-time imaging will enable efficient process development and the control of the structure evolution to make materials with intended properties; it will also permit the development of experimentally informed, predictive structure and process models.« less

  5. Newer imaging methods in chest radiography.

    PubMed

    Wandtke, J C

    1990-01-01

    In recent years the application of computers to chest radiography has resulted in a wide variety of innovative research. Major research efforts have resulted in the development of new types of x-ray detectors, such as storage phosphor technology, for use with computers. Storage phosphor imaging is one of the most promising new techniques, and almost 100 systems have been installed worldwide. Radiologists are quickly evaluating the image quality provided by this new detector system, which has the potential to improve image quality. It has wide latitude and is coupled with a computer to perform image processing. Another promising technology, originally studied in the form of scan equalization radiography, is now commercially available in the form of advanced multiple-beam equalization radiography. This film technique uses computers to modulate the x-ray exposure to take maximum advantage of the imaging capabilities of radiographic film. Digital solid-state detectors have been studied in conjunction with computerized image enhancement systems. These currently show improvement in nodule detection and quantification of the calcium content of a lesion. Application of large image intensifiers to a digital image system is being studied, but there are currently limitations on spatial resolution.

  6. Proton Radiography Peers into Metal Solidification

    SciTech Connect

    Clarke, Amy J.; Imhoff, Seth D.; Gibbs, Paul J.; Cooley, Jason C.; Morris, Christopher; Merrill, Frank E.; Hollander, Brian J.; Mariam, Fesseha G.; Ott, Thomas J.; Barker, Martha R.; Tucker, Tim J.; Lee, Wah-Keat; Fezzaa, Kamel; Deriy, Alex; Patterson, Brian M.; Clarke, Kester D.; Montalvo, Joel D.; Field, Robert D.; Thoma, Dan J.; Smith, James L.; Teter, David F.

    2013-06-19

    Historically, metals are cut up and polished to see the structure and to infer how processing influences the evolution. We can now peer into a metal during processing without destroying it using proton radiography. Understanding the link between processing and structure is important because structure profoundly affects the properties of engineering materials. Synchrotron x-ray radiography has enabled real-time glimpses into metal solidification. However, x-ray energies favor the examination of small volumes and low density metals. In this study, we use high energy proton radiography for the first time to image a large metal volume (>10,000 mm3) during melting and solidification. We also show complementary x-ray results from a small volume (<1mm3), bridging four orders of magnitude. In conclusion, real-time imaging will enable efficient process development and the control of the structure evolution to make materials with intended properties; it will also permit the development of experimentally informed, predictive structure and process models.

  7. Dual energy scanning beam X-radiography

    NASA Astrophysics Data System (ADS)

    Wojcik, Randolph Frank

    Dual energy X-radiography is a method first developed in the mid-1970's by which one uses the information contained in the energy spectrum of the transmitted X-ray flux through an object. With this information one can distinguish the types of materials present in a radiograph and thus allow a computer to subtract them from the image enhancing the contrast of the remaining materials. Using this method, one can see details, which would have been hidden by overlying structures of other materials such as seen in radiographs of parts, made up of mixtures of metals and composites. There is also great interest in this technique for medical imaging of the chest where images of the organs are significantly improved by subtracting the bones. However, even with the enhanced capabilities realized with this technique, the majority of X-radiography systems only measures the bulk transmitted X-ray intensity and ignores the information contained in the energy spectrum. This is due to the added expense, time requirements, and registration problems incurred using standard radiographic methods to obtain dual energy radiographs. This dissertation describes a novel method which overcomes these problems and allows one to perform inexpensive, near real time, single shot dual energy X-radiography. The work of this thesis resulted in US patent #5,742,660.

  8. Impact of digital radiography on clinical workflow.

    PubMed

    May, G A; Deer, D D; Dackiewicz, D

    2000-05-01

    It is commonly accepted that digital radiography (DR) improves workflow and patient throughput compared with traditional film radiography or computed radiography (CR). DR eliminates the film development step and the time to acquire the image from a CR reader. In addition, the wide dynamic range of DR is such that the technologist can perform the quality-control (QC) step directly at the modality in a few seconds, rather than having to transport the newly acquired image to a centralized QC station for review. Furthermore, additional workflow efficiencies can be achieved with DR by employing tight radiology information system (RIS) integration. In the DR imaging environment, this provides for patient demographic information to be automatically downloaded from the RIS to populate the DR Digital Imaging and Communications in Medicine (DICOM) image header. To learn more about this workflow efficiency improvement, we performed a comparative study of workflow steps under three different conditions: traditional film/screen x-ray, DR without RIS integration (ie, manual entry of patient demographics), and DR with RIS integration. This study was performed at the Cleveland Clinic Foundation (Cleveland, OH) using a newly acquired amorphous silicon flat-panel DR system from Canon Medical Systems (Irvine, CA). Our data show that DR without RIS results in substantial workflow savings over traditional film/screen practice. There is an additional 30% reduction in total examination time using DR with RIS integration.

  9. Hand skeletal maturity and its correlation with mandibular dental development

    PubMed Central

    Pousti, Maryam; Adelianfar, Elahe

    2014-01-01

    Objectives: Assessment of pubertal status and pubertal growth spurt in orthodontic patients has a considerable impact on the diagnosis, treatment plan and the outcome of orthodontic treatments. Hand-wrist radiography is routinely used to evaluate skeletal development. Some studies have shown that there is an association between bone development and different stages of dental calcification; therefore, the stages of dental calcification can be used as the first tool for diagnosis, in case there is an association. This study was performed with the aim to evaluate the association between the phases of dental development and the stages of skeletal maturity. Study design: In this study, a total of 52 patients (26 males and 26 females), referring to Mashhad School of Dentistry for orthodontic treatment, were evaluated; the subjects were within the age range of 9-14 years. Hand-wrist radiographic evaluation of skeletal maturation was performed using Fishman method. Also, the Demirjian method was used to identify the stages of dental calcification by panoramic radiographs. Independent t-test and Spearman correlation coefficient were used for data analyses. Results: The mean age of males and females was 11.05 ± 1.05 and 10.62 ± 1.12 years, respectively (p=0.156). The Spearman correlation coefficients between skeletal maturity indicators (SMIs) and developmental stages of mandibular left and right canines and second molars were significant in males only (p<0.05). Also, correlation coefficients were significant between adductor sesamoid ossification and mandibular right and left canines developmental stages in males (p<0.05). Conclusions: Findings of this study showed that the correlation between dental developmental stages and skeletal maturity only were significant in males; thus, different skeletal maturity patterns in males and females might be perceptible. Key words:Skeletal maturation, hand-wrist radiography, panoramic radiography. PMID:25136430

  10. [Phenomenon of dental fear].

    PubMed

    Moore, R; Birn, H

    1990-01-01

    Odontophobia is a rather unique phobia with special psychosomatic components that impact on the dental health of odontophobic persons. It also has psychosocial components largely as a result of destruction of the teeth and subsequent embarrassment that can affect a person and cause a vicious cycle of dental fear. The phenomenon is facilitated by misunderstandings and myths generated by both patients and dentists. The most common reasons given in the literature for such strong fears of dental treatment are: 1) bad experiences in childhood for 85% of cases, 2) feeling of powerlessness and lack of control over personal emotional reactions and over the social situation in the dental chair, 3) social learning processes in which the image of the dentist is cast in a negative light by the mass media or by the person's relatives or friends and 4) that the person has other psychologic problems (in 20% of cases), such as serious phobias and/or neuroses. A strategy of researching and thus tackling the problem is presented which focuses on three essential targets that require studying and change: 1) the community at large and their image of the dentist, 2) the patient role and 3) the dentist role. Various model projects are presented along with their diagnostic systems. These are seen to focus in varying degrees on different elements of the target groups that effect the dentist-patient relationship but the need to come out into the community and make the social environment right for these patients is an important factor in all strategies.(ABSTRACT TRUNCATED AT 250 WORDS)

  11. Emergency skull radiography: the effect of restrictive criteria on skull radiography and CT use

    SciTech Connect

    Baker, S.R.; Gaylord, G.M.; Lantos, G.; Tabaddor, K.; Gallagher, E.J.

    1985-08-01

    A prospective study was performed to determine the effect of restrictive criteria on the use of emergency skull radiography and computed tomography (CT) of the head. Emergency skull radiography required the completion of a special requisition form. Emergency CT of the head was done at the request of senior consultants and was available on a full-time basis. Over 1 year, 2758 skull studies were performed, a decrease of 39.1% when compared with the year before restrictive criteria were instituted, during which 4587 skull examinations were done. In the same period, the number of emergency CT scans of the head increased by 45.7%, from 471 in the control year to 686 in the experimental year. With the use of restrictive criteria, a net savings of $164,000 was achieved. Our results suggest that the use of restrictive criteria is a cost-effective means of limiting skull radiography when CT of the head is readily available.

  12. Clinical Application of Cone Beam Computed Tomography of the Rabbit Head: Part 2—Dental Disease

    PubMed Central

    Riggs, G. G.; Cissell, Derek D.; Arzi, Boaz; Hatcher, David C.; Kass, Philip H.; Zhen, Amy; Verstraete, Frank J. M.

    2017-01-01

    Domestic rabbits are increasing in popularity as household pets; therefore, veterinarians need to be familiar with the most common diseases afflicting rabbits including dental disease. Current diagnostic approaches include gross oral examination, endoscopic oral examination, skull radiography, and computed tomography (CT). Cone beam computed tomography (CBCT), a new oral and maxillofacial imaging modality that has the capability to produce high-resolution images, has not yet been described for use in evaluating dental disease in rabbits. A total of 15 client-owned rabbits had CBCT, oral examination, dental charting, and dental treatment performed under general anesthesia. Images were evaluated using transverse and custom multiplanar (MPR), 3D, and panoramic reconstructed images. The CBCT findings were grouped into abnormalities that could be detected on conscious oral examination vs. abnormalities that could not be detected by conscious oral examination. Potential associations between the two categories were examined by pairwise Fisher’s exact test with statistical significance determined by P < 0.05. The most common findings identified on CBCT images were periodontal ligament space widening (14/15), premolar and molar malocclusion (13/15), apical elongation (13/15), coronal elongation (12/15), inflammatory tooth resorption (12/15), periapical lucency (11/15), moth-eaten pattern of osteolysis of the alveolar bone (9/15), ventral mandibular border contour changes (9/15), and missing teeth (8/15). Of the CBCT abnormalities likely to be observed on oral examination, coronal elongation (detectable on oral examination) was significantly associated with apical elongation (P = 0.029). There were no other significant associations between CBCT findings that are also clinically detectable and CBCT findings that are not be detectable on oral examination. This suggests that pathology often exists that is not apparent upon oral examination. This study establishes the

  13. Inter-observer reproducibility of diagnosis of diabetic foot osteomyelitis based on a combination of probe-to-bone test and simple radiography.

    PubMed

    Álvaro-Afonso, Francisco Javier; Lázaro-Martínez, José Luis; Aragón-Sánchez, Javier; García-Morales, Esther; García-Álvarez, Yolanda; Molines-Barroso, Raúl J

    2014-07-01

    Probe-to-bone test and simple X-rays are both standard tests for the diagnosis of diabetic foot osteomyelitis. This study demonstrates the importance of considering jointly clinical information (probe-to-bone test) and diagnostic tests (simple radiography) to increase agreement among clinicians on diagnosis of diabetic foot osteomyelitis.

  14. Dental Training Films.

    ERIC Educational Resources Information Center

    Veterans Administration Medical Center, Washington, DC.

    This dental training films catalog is organized into two sections. Section I is a category listing of the films by number and title, indexed according to generalized headings; categories are as follow: anatomy, articulator systems, complete dentures, dental assisting, dental laboratory technology, dental materials, dental office emergencies,…

  15. Finding Dental Care

    MedlinePlus

    ... Finding Dental Care Where can I find low-cost dental care? Dental schools often have clinics that allow dental ... can I find more information? See Finding Low Cost Dental Care . ​​​​ WWNRightboxRadEditor2 Contact Us 1-866-232-4528 nidcrinfo@ ...

  16. Intraoral Treatment of Dental Disease in Pet Rabbits.

    PubMed

    Capello, Vittorio

    2016-09-01

    The intraoral treatment of dental disease in pet rabbits follows a complete clinical examination, intraoral inspection under general anesthesia, and diagnostic imaging. It also implies thorough knowledge of dental disease in this species. The most common intraoral procedures are extraction of incisor teeth, coronal reduction, and extraction of cheek teeth. These dental procedures require specific instruments and equipment. They should be performed in conjunction with supportive and medical treatment followed by appropriate nutrition.

  17. AXIS: an instrument for imaging Compton radiographs using the Advanced Radiography Capability on the NIF.

    PubMed

    Hall, G N; Izumi, N; Tommasini, R; Carpenter, A C; Palmer, N E; Zacharias, R; Felker, B; Holder, J P; Allen, F V; Bell, P M; Bradley, D; Montesanti, R; Landen, O L

    2014-11-01

    Compton radiography is an important diagnostic for Inertial Confinement Fusion (ICF), as it provides a means to measure the density and asymmetries of the DT fuel in an ICF capsule near the time of peak compression. The AXIS instrument (ARC (Advanced Radiography Capability) X-ray Imaging System) is a gated detector in development for the National Ignition Facility (NIF), and will initially be capable of recording two Compton radiographs during a single NIF shot. The principal reason for the development of AXIS is the requirement for significantly improved detection quantum efficiency (DQE) at high x-ray energies. AXIS will be the detector for Compton radiography driven by the ARC laser, which will be used to produce Bremsstrahlung X-ray backlighter sources over the range of 50 keV-200 keV for this purpose. It is expected that AXIS will be capable of recording these high-energy x-rays with a DQE several times greater than other X-ray cameras at NIF, as well as providing a much larger field of view of the imploded capsule. AXIS will therefore provide an image with larger signal-to-noise that will allow the density and distribution of the compressed DT fuel to be measured with significantly greater accuracy as ICF experiments are tuned for ignition.

  18. AXIS: An instrument for imaging Compton radiographs using the Advanced Radiography Capability on the NIF

    SciTech Connect

    Hall, G. N. Izumi, N.; Tommasini, R.; Carpenter, A. C.; Palmer, N. E.; Zacharias, R.; Felker, B.; Holder, J. P.; Allen, F. V.; Bell, P. M.; Bradley, D.; Montesanti, R.; Landen, O. L.

    2014-11-15

    Compton radiography is an important diagnostic for Inertial Confinement Fusion (ICF), as it provides a means to measure the density and asymmetries of the DT fuel in an ICF capsule near the time of peak compression. The AXIS instrument (ARC (Advanced Radiography Capability) X-ray Imaging System) is a gated detector in development for the National Ignition Facility (NIF), and will initially be capable of recording two Compton radiographs during a single NIF shot. The principal reason for the development of AXIS is the requirement for significantly improved detection quantum efficiency (DQE) at high x-ray energies. AXIS will be the detector for Compton radiography driven by the ARC laser, which will be used to produce Bremsstrahlung X-ray backlighter sources over the range of 50 keV–200 keV for this purpose. It is expected that AXIS will be capable of recording these high-energy x-rays with a DQE several times greater than other X-ray cameras at NIF, as well as providing a much larger field of view of the imploded capsule. AXIS will therefore provide an image with larger signal-to-noise that will allow the density and distribution of the compressed DT fuel to be measured with significantly greater accuracy as ICF experiments are tuned for ignition.

  19. Dental pathology in conventionally fed and pasture managed dairy cattle.

    PubMed

    Fadden, A N; Poulsen, K P; Vanegas, J; Mecham, J; Bildfell, R; Stieger-Vanegas, S M

    2016-01-02

    Healthy teeth are important in the first stages of digestion for dairy cattle, yet little is known about bovine dental disease. This study aimed to investigate dental pathology of dairy cattle in two parts. First dairy cattle cadaver heads (n=11) were examined at the time of culling. Second, the authors performed oral exams in cattle fed a total mixed ration (TMR) (n=200) and pasture-based (n=71) grazing cattle. Cadaver heads were imaged using radiography and computed tomography before gross dissection to study dental anatomy and pathology. The most prevalent dental abnormalities were excessive transverse ridging of the occlusal surface, the presence of diastemas and third molar dental overgrowths (M3DO) in cadaver heads. Average thickness of subocclusal dentine ranged from 3.5 mm to 5.8 mm in cheek teeth but was >10 mm in maxillary teeth with M3DO. Radiographic findings were compared with oral examinations in live cattle. Prevalence of M3DO upon oral examination was 19 per cent and 28 per cent in herds of cattle fed a TMR diet and 0 per cent in a herd of grazing cattle. Dental abnormalities are prevalent in dairy cattle but due to thin subocclusal dentine in the cheek teeth, established equine dental treatment methodology is not appropriate for bovine cheek teeth with the exception of those that have developed M3DO.

  20. Dental education and dental practice.

    PubMed Central

    Moore, J R

    1984-01-01

    This paper relates recent modes of dental practice to changes that the public and government are likely to ask the health care professions to make in the future. As usual they are asking for the best of all worlds. First, that we maintain the clinical model to the highest standards of personal dental care based and tested against the best research at our disposal, whilst we ensure there is no reduction in the high technical standards for which british dentists have a reputation. Second, that the profession is required to consider ways of providing care on the medicosocial model for the whole community at an economic level the country will afford. The broad changes in dental education have been reviewed, from the technical apprenticeship to the establishment of strong university departments in teaching hospitals. The importance of a sound biomedical foundation and of research both to education and the credibility of dental practice as a primary health care profession is stressed if the profession is to retain its position as a sister to medicine and not slide down to that of a technical ancillary. PMID:6374141

  1. An unexpected cause of vaginal bleeding: the role of pelvic radiography

    PubMed Central

    Kyrgios, Ioannis; Emmanouilidou, Eleftheria; Theodoridis, Theodoros; Galli-Tsinopoulou, Assimina

    2014-01-01

    Vaginal bleeding and/or discharge in young girls may result from infection, urological problems, endocrine causes, bleeding disorders, dermatological conditions, trauma, sexual abuse, masses or foreign bodies. We report a case of excessive vaginal bleeding caused by a foreign body in a prepubertal girl with emphasis on the diagnostic challenges and pitfalls regarding imaging techniques. In our patient, although invasive and expensive investigations had been initially made, the foreign body was last detected only when a plain pelvic radiography was performed. PMID:24532235

  2. Clinical performance of a prototype flat-panel digital detector for general radiography

    NASA Astrophysics Data System (ADS)

    Huda, Walter; Scalzetti, Ernest M.; Roskopf, Marsha L.; Geiger, Robert

    2001-08-01

    Digital radiographs obtained using a prototype Digital Radiography System (Stingray) were compared with those obtained using conventional screen-film. Forty adult volunteers each had two identical radiographs taken at the same level of radiation exposure, one using screen-film and the other the digital detector. Each digital image was processed by hand to ensure that the printed quality was optimal. Ten radiologists compared the diagnostic image quality of the digital images with the corresponding film radiographs using a seven point ranking scheme.

  3. The Past and Future of the Electronic Dental Record from the Practitioners' View.

    ERIC Educational Resources Information Center

    Neiburger, E. J.; Diehl, M. C.

    1991-01-01

    Future dental practice is seen to include not only the electronic dental record (EDR) but a fully electronic clinical dental documentation package, computer-assisted diagnostic support, and digital imaging. The EDR's development since the 1970s is reviewed. Specific suggestions are made concerning hardware, software, administration, and practical…

  4. Improvement of material decomposition and image quality in dual-energy radiography by reducing image noise

    NASA Astrophysics Data System (ADS)

    Lee, D.; Kim, Y.-s.; Choi, S.; Lee, H.; Choi, S.; Jo, B. D.; Jeon, P.-H.; Kim, H.; Kim, D.; Kim, H.; Kim, H.-J.

    2016-08-01

    Although digital radiography has been widely used for screening human anatomical structures in clinical situations, it has several limitations due to anatomical overlapping. To resolve this problem, dual-energy imaging techniques, which provide a method for decomposing overlying anatomical structures, have been suggested as alternative imaging techniques. Previous studies have reported several dual-energy techniques, each resulting in different image qualities. In this study, we compared three dual-energy techniques: simple log subtraction (SLS), simple smoothing of a high-energy image (SSH), and anti-correlated noise reduction (ACNR) with respect to material thickness quantification and image quality. To evaluate dual-energy radiography, we conducted Monte Carlo simulation and experimental phantom studies. The Geant 4 Application for Tomographic Emission (GATE) v 6.0 and tungsten anode spectral model using interpolation polynomials (TASMIP) codes were used for simulation studies and digital radiography, and human chest phantoms were used for experimental studies. The results of the simulation study showed improved image contrast-to-noise ratio (CNR) and coefficient of variation (COV) values and bone thickness estimation accuracy by applying the ACNR and SSH methods. Furthermore, the chest phantom images showed better image quality with the SSH and ACNR methods compared to the SLS method. In particular, the bone texture characteristics were well-described by applying the SSH and ACNR methods. In conclusion, the SSH and ACNR methods improved the accuracy of material quantification and image quality in dual-energy radiography compared to SLS. Our results can contribute to better diagnostic capabilities of dual-energy images and accurate material quantification in various clinical situations.

  5. Dental Implant Surgery

    MedlinePlus

    Dental implant surgery Overview By Mayo Clinic Staff Dental implant surgery is a procedure that replaces tooth roots with ... look and function much like real ones. Dental implant surgery can offer a welcome alternative to dentures ...

  6. Axial Tomography from Digitized Real Time Radiography

    DOE R&D Accomplishments Database

    Zolnay, A. S.; McDonald, W. M.; Doupont, P. A.; McKinney, R. L.; Lee, M. M.

    1985-01-18

    Axial tomography from digitized real time radiographs provides a useful tool for industrial radiography and tomography. The components of this system are: x-ray source, image intensifier, video camera, video line extractor and digitizer, data storage and reconstruction computers. With this system it is possible to view a two dimensional x-ray image in real time at each angle of rotation and select the tomography plane of interest by choosing which video line to digitize. The digitization of a video line requires less than a second making data acquisition relatively short. Further improvements on this system are planned and initial results are reported.

  7. Digital Radiography Qualification of Tube Welding

    NASA Technical Reports Server (NTRS)

    Carl, Chad

    2012-01-01

    The Orion Project will be directing Lockheed Martin to perform orbital arc welding on commodities metallic tubing as part of the Multi Purpose Crew Vehicle assembly and integration process in the Operations and Checkout High bay at Kennedy Space Center. The current method of nondestructive evaluation is utilizing traditional film based x-rays. Due to the high number of welds that are necessary to join the commodities tubing (approx 470), a more efficient and expeditious method of nondestructive evaluation is desired. Digital radiography will be qualified as part of a broader NNWG project scope.

  8. Axial tomography from digitized real time radiography

    SciTech Connect

    Zolnay, A.S.; McDonald, W.M.; Doupont, P.A.; McKinney, R.L.; Lee, M.M.

    1985-01-18

    Axial tomography from digitized real time radiographs provides a useful tool for industrial radiography and tomography. The components of this system are: x-ray source, image intensifier, video camera, video line extractor and digitizer, data storage and reconstruction computers. With this system it is possible to view a two dimensional x-ray image in real time at each angle of rotation and select the tomography plane of interest by choosing which video line to digitize. The digitization of a video line requires less than a second making data acquisition relatively short. Further improvements on this system are planned and initial results are reported.

  9. Dental Holography

    NASA Astrophysics Data System (ADS)

    Dirtoft, Ingegerd

    1983-12-01

    Ten years have passed since the first articles appeared in this new field. The qualities of the laser light together with the need of contactless 3-D measurements for different dental purposes seemed to be extremely promising, but still just a few scientists have used the method and mostly for laboratory studies. For some reason there has been a preponderance for orthodontic measurements. This seems to be a bit peculiar from holographic view compared with measurements for engineering purposes, which usually are made on metals. So naturally holography can become a clinical tool for measurements in the field of fixed bridges, removable partial dentures and implants. One of the problems is that the need for holography in dental research must be fulfilled in collaboration with physicists. Only a two-way communication during an entire experiment can balance both technical and odontological demands and thus give practical and clinical important results. The need for an easy way of handling the evaluation to get all required information is another problem and of course the holographic equipment must be converted to a box easy to handle for everyone. At last the position of dental holography today is going to be carefully examined together with an attempt to look into the hopefully exciting and not to utopic future for this research field.

  10. Evaluation of entrance surface air kerma in pediatric chest radiography

    NASA Astrophysics Data System (ADS)

    Porto, L.; Lunelli, N.; Paschuk, S.; Oliveira, A.; Ferreira, J. L.; Schelin, H.; Miguel, C.; Denyak, V.; Kmiecik, C.; Tilly, J.; Khoury, H.

    2014-11-01

    The objective of this study was to evaluate the entrance surface air kerma in pediatric chest radiography. An evaluation of 301 radiographical examinations in anterior-posterior (AP) and posterior-anterior (PA) (166 examinations) and lateral (LAT) (135 examinations) projections was performed. The analyses were performed on patients grouped by age; the groups included ages 0-1 y, 1-5 y, 5-10 y, and 10-15 y. The entrance surface air kerma was determined with DoseCal software (Radiological Protection Center of Saint George's Hospital, London) and thermoluminescent dosimeters. Two different exposure techniques were compared. The doses received by patients who had undergone LAT examinations were 40% higher, on average, those in AP/PA examinations because of the difference in tube voltage. A large high-dose “tail” was observed for children up to 5 y old. An increase in tube potential and corresponding decrease in current lead to a significant dose reduction. The difference between the average dose values for different age ranges was not practically observed, implying that the exposure techniques are still not optimal. Exposure doses received using the higher tube voltage and lower current-time product correspond to the international diagnostic reference levels.

  11. Optimization of the radiological protection of patients undergoing digital radiography.

    PubMed

    Zhang, Menglong; Chu, Cunkun

    2012-02-01

    Because of a much higher dynamic range of flat panel detectors, patient dose can vary without change of image quality being perceived by radiologists. This condition makes optimization (OT) of radiation protection undergoing digital radiography (DR) more complex, while a chance to reduced patient dose also exists. In this study, we evaluated the difference of patient radiation and image rejection before and after OT to identify if it is necessary to carry out an OT procedure in a routine task with DR. The study consisted of a measurement of the dose area product (DAP) and entrance surface dose (ESD) received by a reference group of patients for eight common radiographic procedures using the DR system before and after OT. Meanwhile image rejection data during two 2-month periods were collected and sorted according to reason. For every radiographic procedure, t tests showed significant difference in average ESD and DAP before and after OT (p < 0.005). The ESDs from most examinations before OT were three times higher than that after OT. For DAPs, the difference is more significant. Image rejection rate after OT is significantly lower than that before OT (χ (2) = 36.5, p < 0.005). The substantial reductions of dose after OT resulted from appropriate mAs and exposure field. For DR patient dose, less than recommended diagnostic reference level can meet quality criteria and clinic diagnosis.

  12. Dental x-ray diagnostic installation

    SciTech Connect

    Grassme, U.

    1985-02-19

    An exemplary embodiment comprises an exposure unit including an X-ray tube and a cassette holder rotatable about vertical axes and between which the head of the patient is disposed. A radiation detector is disposed at the cassette holder for supplying an electrical signal corresponding to the dose rate when it is struck by X-rays and being interconnected with an X-ray tube voltage controller and a dose rate regulator in such manner that the X-ray tube voltage is influenced by the output of the radiation detector to control the dose rate to a value producing an optimum film blackening. A function generator determining the speed of the exposure unit is provided in which a speed curve is stored given which the radiation dose influencing the film is approximately constant.

  13. Advances in digital radiography: physical principles and system overview.

    PubMed

    Körner, Markus; Weber, Christof H; Wirth, Stefan; Pfeifer, Klaus-Jürgen; Reiser, Maximilian F; Treitl, Marcus

    2007-01-01

    During the past two decades, digital radiography has supplanted screen-film radiography in many radiology departments. Today, manufacturers provide a variety of digital imaging solutions based on various detector and readout technologies. Digital detectors allow implementation of a fully digital picture archiving and communication system, in which images are stored digitally and are available anytime. Image distribution in hospitals can now be achieved electronically by means of web-based technology with no risk of losing images. Other advantages of digital radiography include higher patient throughput, increased dose efficiency, and the greater dynamic range of digital detectors with possible reduction of radiation exposure to the patient. The future of radiography will be digital, and it behooves radiologists to be familiar with the technical principles, image quality criteria, and radiation exposure issues associated with the various digital radiography systems that are currently available.

  14. Using ytterbium-169 for safe and economical industrial radiography

    SciTech Connect

    Dowalo, J.A.

    1994-01-01

    Safety has become an issue of paramount importance for industrial radiography. Many NDE facilities and suppliers are finding the cost of performing radiography Prohibitive due to heightened safety concerns for radiation area protection. The most common sources used in radiography, Iridium-192 and Cobalt-60, result in high radiation fields over a large area. Even when collimators are used large radiation fields can result from multicurie source radiography. Radiographic operations are being forced to find alternative test methods and techniques to the use of the old stand-by sources. These alternate methods are not always as comprehensive a test as full volumetric examination with radiography. Since Iridium and Cobalt are in such wide spread use, they are sometimes called upon to perform test of materials which are not in their optimum sensitivity range.

  15. Simulation of computed radiography with imaging plate detectors

    SciTech Connect

    Tisseur, D.; Costin, M.; Mathy, F.; Schumm, A.

    2014-02-18

    Computed radiography (CR) using phosphor imaging plate detectors is taking an increasing place in Radiography Testing. CR uses similar equipment as conventional radiography except that the classical X-ray film is replaced by a numerical detector, called image plate (IP), which is made of a photostimulable layer and which is read by a scanning device through photostimulated luminescence. Such digital radiography has already demonstrated important benefits in terms of exposure time, decrease of source energies and thus reduction of radioprotection area besides being a solution without effluents. This paper presents a model for the simulation of radiography with image plate detectors in CIVA together with examples of validation of the model. The study consists in a cross comparison between experimental and simulation results obtained on a step wedge with a classical X-ray tube. Results are proposed in particular with wire Image quality Indicator (IQI) and duplex IQI.

  16. Neutron radiography of irradiated nuclear fuel at Idaho National Laboratory

    SciTech Connect

    Craft, Aaron E.; Wachs, Daniel M.; Okuniewski, Maria A.; Chichester, David L.; Williams, Walter J.; Papaioannou, Glen C.; Smolinski, Andrew T.

    2015-09-10

    Neutron radiography of irradiated nuclear fuel provides more comprehensive information about the internal condition of irradiated nuclear fuel than any other non-destructive technique to date. Idaho National Laboratory (INL) has multiple nuclear fuels research and development programs that routinely evaluate irradiated fuels using neutron radiography. The Neutron Radiography reactor (NRAD) sits beneath a shielded hot cell facility where neutron radiography and other evaluation techniques are performed on these highly radioactive objects. The NRAD currently uses the foil-film transfer technique for imaging fuel that is time consuming but provides high spatial resolution. This study describes the NRAD and hot cell facilities, the current neutron radiography capabilities available at INL, planned upgrades to the neutron imaging systems, and new facilities being brought online at INL related to neutron imaging.

  17. Neutron Radiography of Irradiated Nuclear Fuel at Idaho National Laboratory

    NASA Astrophysics Data System (ADS)

    Craft, Aaron E.; Wachs, Daniel M.; Okuniewski, Maria A.; Chichester, David L.; Williams, Walter J.; Papaioannou, Glen C.; Smolinski, Andrew T.

    Neutron radiography of irradiated nuclear fuel provides more comprehensive information about the internal condition of irradiated nuclear fuel than any other non-destructive technique to date. Idaho National Laboratory (INL) has multiple nuclear fuels research and development programs that routinely evaluate irradiated fuels using neutron radiography. The Neutron Radiography reactor (NRAD) sits beneath a shielded hot cell facility where neutron radiography and other evaluation techniques are performed on these highly radioactive objects. The NRAD currently uses the foil-film transfer technique for imaging fuel that is time consuming but provides high spatial resolution. This paper describes the NRAD and hot cell facilities, the current neutron radiography capabilities available at INL, planned upgrades to the neutron imaging systems, and new facilities being brought online at INL related to neutron imaging.

  18. Neutron radiography of irradiated nuclear fuel at Idaho National Laboratory

    DOE PAGES

    Craft, Aaron E.; Wachs, Daniel M.; Okuniewski, Maria A.; ...

    2015-09-10

    Neutron radiography of irradiated nuclear fuel provides more comprehensive information about the internal condition of irradiated nuclear fuel than any other non-destructive technique to date. Idaho National Laboratory (INL) has multiple nuclear fuels research and development programs that routinely evaluate irradiated fuels using neutron radiography. The Neutron Radiography reactor (NRAD) sits beneath a shielded hot cell facility where neutron radiography and other evaluation techniques are performed on these highly radioactive objects. The NRAD currently uses the foil-film transfer technique for imaging fuel that is time consuming but provides high spatial resolution. This study describes the NRAD and hot cell facilities,more » the current neutron radiography capabilities available at INL, planned upgrades to the neutron imaging systems, and new facilities being brought online at INL related to neutron imaging.« less

  19. Walking on thin ice! Identifying methamphetamine “drug mules” on digital plain radiography

    PubMed Central

    Abdul Rashid, S N; Mohamad Saini, S B; Abdul Hamid, S; Muhammad, S J; Mahmud, R; Thali, M J

    2014-01-01

    Objective: The purpose of this study was to retrospectively evaluate the sensitivity, specificity and accuracy of identifying methamphetamine (MA) internal payloads in “drug mules” by plain abdominal digital radiography (DR). Methods: The study consisted of 35 individuals suspected of internal MA drug containers. A total of 59 supine digital radiographs were collected. An overall calculation regarding the diagnostic accuracy for all “drug mules” and a specific evaluation concerning the radiological appearance of drug packs as well as the rate of clearance and complications in correlation with the reader's experience were performed. The gold standard was the presence of secured drug packs in the faeces. Results: There were 16 true-positive “drug mules” identified. DR of all drug carriers for Group 1 (forensic imaging experienced readers, n = 2) exhibited a sensitivity of 100%, a mean specificity of 76.3%, positive predictive value (PPV) of 78.5%, negative predictive value (NPV) of 100% and a mean accuracy 87.2%. Group 2 (inexperienced readers, n = 3) showed a lower sensitivity (93.7%), a mean specificity of 86%, a PPV of 86.5%, an NPV of 94.1% and a mean accuracy of 89.5%. The interrater agreement within Group 1 was 0.72 and within Group 2 averaged to 0.79, indicating a fair to very good agreement. Conclusion: DR is a valuable screening tool in cases of MA body packers with huge internal payloads being associated with a high diagnostic insecurity. Diagnostic insecurity on plain films may be overcome by low-dose CT as a cross-sectional imaging modality and addressed by improved radiological education in reporting drug carriers on imaging. Advances in knowledge: Diagnostic signs (double-condom and halo signs) on digital plain radiography are specific in MA “drug mules”, although DR is associated with high diagnostic insecurity and underreports the total internal payload. PMID:24472728

  20. Digital panoramic radiography versus cone beam computed tomography in the delineation of maxillomandibular tumors.

    PubMed

    Almeida-Barros, Renata Quirino de; Abilio, Vanessa Maria Freire; Yamamoto, Angela Toshie Araki; Melo, Daniela Pita de; Godoy, Gustavo Pina; Bento, Patricia Meira

    2015-01-01

    This research aimed to compare the efficacy of digital panoramic radiography (DPR) with that of cone beam computed tomography (CBCT) for delineation of odontogenic and nonodontogenic tumors. From November 2009 through March 2011, 23 tumors in the maxillomandibular complex were diagnosed by histopathological examination. All DPRs and CBCTs were obtained and analyzed by a single previously calibrated radiologist, who considered the following radiographic aspects: clarity of the lesion edges, relation with dental elements, involvement of adjacent anatomical structures, cortical bone expansion and disruption, and, if present, type of involved anatomical structures and site of bone expansion and disruption. Of 23 patients, 15 (65.2%) were male and 8 (34.8%) were female. The tumor was classified as odontogenic in 73.9% of patients and nonodontogenic in 26.1% of patients. Analysis revealed that 56.5% of the tumors were located in the mandible, 34.8% in the maxilla, and 8.7% in both arches. For all analyzed variables, CBCTs offered more accurate details than did DPRs. Panoramic radiography should not be the examination of choice to visualize lesions in the maxillomandibular complex.

  1. Accuracy of digital periapical radiography and cone-beam computed tomography in detecting external root resorption

    PubMed Central

    Geha, Hassem; Sankar, Vidya; Teixeira, Fabricio B.; McMahan, Clyde Alex; Noujeim, Marcel

    2015-01-01

    Purpose The purpose of this study was to evaluate and compare the efficacy of cone-beam computed tomography (CBCT) and digital intraoral radiography in diagnosing simulated small external root resorption cavities. Materials and Methods Cavities were drilled in 159 roots using a small spherical bur at different root levels and on all surfaces. The teeth were imaged both with intraoral digital radiography using image plates and with CBCT. Two sets of intraoral images were acquired per tooth: orthogonal (PA) which was the conventional periapical radiograph and mesioangulated (SET). Four readers were asked to rate their confidence level in detecting and locating the lesions. Receiver operating characteristic (ROC) analysis was performed to assess the accuracy of each modality in detecting the presence of lesions, the affected surface, and the affected level. Analysis of variation was used to compare the results and kappa analysis was used to evaluate interobserver agreement. Results A significant difference in the area under the ROC curves was found among the three modalities (P=0.0002), with CBCT (0.81) having a significantly higher value than PA (0.71) or SET (0.71). PA was slightly more accurate than SET, but the difference was not statistically significant. CBCT was also superior in locating the affected surface and level. Conclusion CBCT has already proven its superiority in detecting multiple dental conditions, and this study shows it to likewise be superior in detecting and locating incipient external root resorption. PMID:26389057

  2. Pediatric diagnostic imaging

    SciTech Connect

    Gyll, C.; Blake, N.S.

    1986-01-01

    This book treats the practical problems of pediatric radiography and radiological procedures. Written jointly by a radiographer and a radiologist, it covers pediatric positioning and procedures. An extended chapter covers neonatal radiography and radiology.

  3. Diagnostic imaging for aortic dissection.

    PubMed

    Kapustin, Andrew J; Litt, Harold I

    2005-01-01

    Diagnostic imaging for aortic dissection has dramatically changed in recent years. Previously, imaging consisted of conventional X-ray radiography, followed by invasive catheter angiography. Now imaging of dissection is performed primarily with multidetector CT, and to a lesser extent, with ultrasound and MRI. Catheter angiography is used primarily as a means of treating complications. Which modality to choose depends on patient factors, physician preference, and differences in availability of state-of-the-art equipment. All three modalities are highly accurate in experienced hands and have revolutionized the detection and evaluation of this condition.

  4. Beam characterization at the Neutron Radiography Reactor

    SciTech Connect

    Sarah W. Morgan; Jeffrey C. King; Chad L. Pope

    2013-12-01

    The quality of a neutron-imaging beam directly impacts the quality of radiographic images produced using that beam. Fully characterizing a neutron beam, including determination of the beam's effective length-to-diameter ratio, neutron flux profile, energy spectrum, potential image quality, and beam divergence, is vital for producing quality radiographic images. This paper provides a characterization of the east neutron imaging beamline at the Idaho National Laboratory Neutron Radiography Reactor (NRAD). The experiments which measured the beam's effective length-to-diameter ratio and potential image quality are based on American Society for Testing and Materials (ASTM) standards. An analysis of the image produced by a calibrated phantom measured the beam divergence. The energy spectrum measurements consist of a series of foil irradiations using a selection of activation foils, compared to the results produced by a Monte Carlo n-Particle (MCNP) model of the beamline. The NRAD has an effective collimation ratio greater than 125, a beam divergence of 0.3 +_ 0.1 degrees, and a gold foil cadmium ratio of 2.7. The flux profile has been quantified and the facility is an ASTM Category 1 radiographic facility. Based on bare and cadmium covered foil activation results, the neutron energy spectrum used in the current MCNP model of the radiography beamline over-samples the thermal region of the neutron energy spectrum.

  5. A system for fast neutron radiography

    SciTech Connect

    Klann, R.T.

    1997-04-01

    A system has been designed and a neutron generator installed to perform fast neutron radiography. With this system, objects as small as a coin and as large as a 19 liter container have been radiographed. The neutron source is an MF Physics A-711 neutron generator which produces 3 x 10[sup 10] neutrons/second with an average energy of 14. 5 MeV. The radiography system uses x-ray scintillation screens and film in commercially available light-tight cassettes. The cassettes have been modified to include a thin sheet of plastic to produce protons from the neutron beam through elastic scattering from hydrogen and other low Z materials in the plastic. For film densities from 1.8 to 3.0, exposures range from 1.9 x 10[sup 7] n/cm[sup 2] to 3.8 x 10[sup 8] n/cm[sup 2] depending on the type of screen and film. The optimum source-to-film distance was found to be 150 cm. At this distance, the geometric unsharpness was determined to be approximately 2.2-2.3 mm and the smallest hole that could be resolved in a 1.25 cm thick sample had a diameter of 0.079 cm.

  6. Positioning long lines: contrast versus plain radiography

    PubMed Central

    Reece, A; Ubhi, T; Craig, A; Newell, S

    2001-01-01

    AIM—To assess the value of contrast versus plain radiography in determining radio-opaque long line tip position in neonates.
METHODS—In a prospective study, plain radiography was performed after insertion of radio-opaque long lines. If the line tip was not visible on the plain film, a second film with contrast was obtained in an attempt to visualise the tip.
RESULTS—Sixty eight lines were inserted during the study period, 62 of which were included in the study. In 31, a second radiographic examination with contrast was necessary to determine position of the tip. In 29 of these, the line tip was clearly visualised with contrast. On two occasions, the line tip could not be seen because the contrast had filled the vein and obscured the tip from view. Eight of the lines that required a second radiograph with contrast were repositioned.
CONCLUSION—Intravenous contrast should be routinely used in the assessment of long line position in the neonate.

 PMID:11207231

  7. Neutron Radiography Reactor Reactivity -- Focused Lessons Learned

    SciTech Connect

    Eric Woolstenhulme; Randal Damiana; Kenneth Schreck; Ann Marie Phillips; Dana Hewit

    2010-11-01

    As part of the Global Threat Reduction Initiative, the Neutron Radiography Reactor (NRAD) at the Idaho National Laboratory (INL) was converted from using highly enriched uranium (HEU) to low enriched uranium (LEU) fuel. After the conversion, NRAD resumed operations and is meeting operational requirements. Radiography image quality and the number of images that can be produced in a given time frame match pre-conversion capabilities. However, following the conversion, NRAD’s excess reactivity with the LEU fuel was less than it had been with the HEU fuel. Although some differences between model predictions and actual performance are to be expected, the lack of flexibility in NRAD’s safety documentation prevented adjusting the reactivity by adding more fuel, until the safety documentation could be modified. To aid future reactor conversions, a reactivity-focused Lessons Learned meeting was held. This report summarizes the findings of the lessons learned meeting and addresses specific questions posed by DOE regarding NRAD’s conversion and reactivity.

  8. EOS imaging versus current radiography: A health technology assessment study

    PubMed Central

    Mahboub-Ahari, Alireza; Hajebrahimi, Sakineh; Yusefi, Mahmoud; Velayati, Ashraf

    2016-01-01

    Background: EOS is a 2D/3D muscle skeletal diagnostic imaging system. The device has been developed to produce a high quality 2D, full body radiographs in standing, sitting and squatting positions. Three dimensional images can be reconstructed via sterEOS software. This Health Technology Assessment study aimed to investigate efficacy, effectiveness and cost-effectiveness of new emerged EOS imaging system in comparison with conventional x-ray radiographic techniques. Methods: All cost and outcome data were assessed from Iran's Ministry of Health Perspective. Data for clinical effectiveness was extracted using a rigorous systematic review. As clinical outcomes the rate of x-ray emission and related quality of life were compared with Computed Radiography (CR) and Digital Radiography (DR). Standard costing method was conducted to find related direct medical costs. In order to examine robustness of the calculated Incremental Cost Effectiveness Ratios (ICERs) we used two-way sensitivity analysis. GDP Per capita of Islamic Republic of Iran (2012) adopted as cost-effectiveness threshold. Results: Review of related literature highlighted the lack of rigorous evidence for clinical outcomes. Ultra low dose EOS imaging device is known as a safe intervention because of FDA, CE and CSA certificates. The rate of emitted X-ray was 2 to 18 fold lower for EOS compared to the conventional techniques (p<0.001). The Incremental Cost Effectiveness Ratio for EOS relative to CR calculated $50706 in baseline analysis (the first scenario) and $50714, $9446 respectively for the second and third scenarios. Considering the value of neither $42146 as upper limit, nor the first neither the second scenario could pass the cost-effectiveness threshold for Iran. Conclusion: EOS imaging technique might not be considered as a cost-effective intervention in routine practice of health system, especially within in-patient wards. Scenario analysis shows that, only in an optimum condition such as lower

  9. Imaging properties of digital magnification radiography.

    PubMed

    Boyce, Sarah J; Samei, Ehsan

    2006-04-01

    Flat panel detectors exhibit improved signal-to-noise ratio (SNR) and display capabilities compared to film. This improvement necessitates a new evaluation of optimal geometry for conventional projection imaging applications such as digital projection mammography as well as for advanced x-ray imaging applications including cone-beam computed tomography (CT), tomosynthesis, and mammotomography. Such an evaluation was undertaken in this study to examine the effects of x-ray source distribution, inherent detector resolution, magnification, scatter rejection, and noise characteristics including noise aliasing. A model for x-ray image acquisition was used to develop generic results applicable to flat panel detectors with similar x-ray absorption characteristics. The model assumed a Gaussian distribution for the focal spot and a rectangular distribution for a pixel. A generic model for the modulated transfer function (MTF) of indirect flat panel detectors was derived by a nonlinear fit of empirical receptor data to the Burgess model for phosphor MTFs. Noise characteristics were investigated using a generic noise power spectrum (NPS) model for indirect phosphor-based detectors. The detective quantum efficiency (DQE) was then calculated from the MTF and NPS models. The results were examined as a function of focal spot size (0.1, 0.3, and 0.6 mm) and pixel size (50, 100, 150, and 200 microm) for magnification ranges 1 to 3. Mammography, general radiography (also applicable to mammotomography), and chest radiography applications were explored using x-ray energies of 28, 74, and 120 kVp, respectively. Nodule detection was examined using the effective point source scatter model, effective DQE, and the Hotelling SNR2 efficiency. Results indicate that magnification can potentially improve the signal and noise performance of digital images. Results also show that a cross over point occurs in the spatial frequency above and below which the effects of magnification differ

  10. High Brightness Neutron Source for Radiography

    SciTech Connect

    Cremer, J. T.; Piestrup, Melvin, A.; Gary, Charles, K.; Harris, Jack, L. Williams, David, J.; Jones, Glenn, E.; Vainionpaa, J. , H.; Fuller, Michael, J.; Rothbart, George, H.; Kwan, J., W.; Ludewigt, B., A.; Gough, R.., A..; Reijonen, Jani; Leung, Ka-Ngo

    2008-12-08

    This research and development program was designed to improve nondestructive evaluation of large mechanical objects by providing both fast and thermal neutron sources for radiography. Neutron radiography permits inspection inside objects that x-rays cannot penetrate and permits imaging of corrosion and cracks in low-density materials. Discovering of fatigue cracks and corrosion in piping without the necessity of insulation removal is possible. Neutron radiography sources can provide for the nondestructive testing interests of commercial and military aircraft, public utilities and petrochemical organizations. Three neutron prototype neutron generators were designed and fabricated based on original research done at the Lawrence Berkeley National Laboratory (LBNL). The research and development of these generators was successfully continued by LBNL and Adelphi Technology Inc. under this STTR. The original design goals of high neutron yield and generator robustness have been achieved, using new technology developed under this grant. In one prototype generator, the fast neutron yield and brightness was roughly 10 times larger than previously marketed neutron generators using the same deuterium-deuterium reaction. In another generator, we integrate a moderator with a fast neutron source, resulting in a high brightness thermal neutron generator. The moderator acts as both conventional moderator and mechanical and electrical support structure for the generator and effectively mimics a nuclear reactor. In addition to the new prototype generators, an entirely new plasma ion source for neutron production was developed. First developed by LBNL, this source uses a spiral antenna to more efficiently couple the RF radiation into the plasma, reducing the required gas pressure so that the generator head can be completely sealed, permitting the possible use of tritium gas. This also permits the generator to use the deuterium-tritium reaction to produce 14-MeV neutrons with increases

  11. Optimization of exposure in panoramic radiography while maintaining image quality using adaptive filtering.

    PubMed

    Svenson, Björn; Larsson, Lars; Båth, Magnus

    2016-01-01

    Objective The purpose of the present study was to investigate the potential of using advanced external adaptive image processing for maintaining image quality while reducing exposure in dental panoramic storage phosphor plate (SPP) radiography. Materials and methods Thirty-seven SPP radiographs of a skull phantom were acquired using a Scanora panoramic X-ray machine with various tube load, tube voltage, SPP sensitivity and filtration settings. The radiographs were processed using General Operator Processor (GOP) technology. Fifteen dentists, all within the dental radiology field, compared the structural image quality of each radiograph with a reference image on a 5-point rating scale in a visual grading characteristics (VGC) study. The reference image was acquired with the acquisition parameters commonly used in daily operation (70 kVp, 150 mAs and sensitivity class 200) and processed using the standard process parameters supplied by the modality vendor. Results All GOP-processed images with similar (or higher) dose as the reference image resulted in higher image quality than the reference. All GOP-processed images with similar image quality as the reference image were acquired at a lower dose than the reference. This indicates that the external image processing improved the image quality compared with the standard processing. Regarding acquisition parameters, no strong dependency of the image quality on the radiation quality was seen and the image quality was mainly affected by the dose. Conclusions The present study indicates that advanced external adaptive image processing may be beneficial in panoramic radiography for increasing the image quality of SPP radiographs or for reducing the exposure while maintaining image quality.

  12. Pain Sensation and Postsurgical Complications in Posterior Mandibular Implant Placement Using Ridge Mapping, Panoramic Radiography, and Infiltration Anesthesia

    PubMed Central

    2013-01-01

    Objectives. The aim of this study was to investigate intrasurgical and after surgical, pain and the incidence of after surgical alteration of sensation in the mandible and lower lip when placing implants in the posterior mandible using ridge mapping, panoramic radiography, and infiltration anesthesia. Methods. This was a longitudinal clinical study of healthy patients needing implant placement in the posterior mandible. After thorough examination and treatment plan using ridge mapping and panoramic radiography, all patients received dental implants under local infiltration anesthesia. The patients were then given a questionnaire to assess the pain during anesthesia and implant surgery. Change of sensation in the lower lip was evaluated by standard neurosensory examination tests at 7 days and 1 and 4 months. Prosthetic treatment was carried out 4 months postsurgery and the patients were followed for an average of 28.5 months afterwards. Results. A total of 103 implants were placed in 62 patients. Patients reported very minor pain during injection. No pain was reported during either implant placement or bone grafting procedures. No alteration of sensation in the mandible or lower lip was recorded postsurgery. Conclusion. In most cases, ridge mapping, panoramic radiography, and infiltration anesthesia are sufficient for posterior mandibular implant placement without pain or complications. PMID:23762571

  13. 21 CFR 872.1905 - Dental x-ray film holder.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Dental x-ray film holder. 872.1905 Section 872...) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1905 Dental x-ray film holder. (a) Identification. A dental x-ray film holder is a device intended to position and to hold x-ray film inside the...

  14. 21 CFR 872.1905 - Dental x-ray film holder.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Dental x-ray film holder. 872.1905 Section 872...) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1905 Dental x-ray film holder. (a) Identification. A dental x-ray film holder is a device intended to position and to hold x-ray film inside the...

  15. 21 CFR 872.1905 - Dental x-ray film holder.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Dental x-ray film holder. 872.1905 Section 872...) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1905 Dental x-ray film holder. (a) Identification. A dental x-ray film holder is a device intended to position and to hold x-ray film inside the...

  16. 21 CFR 872.1905 - Dental x-ray film holder.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Dental x-ray film holder. 872.1905 Section 872...) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1905 Dental x-ray film holder. (a) Identification. A dental x-ray film holder is a device intended to position and to hold x-ray film inside the...

  17. 21 CFR 872.1905 - Dental x-ray film holder.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental x-ray film holder. 872.1905 Section 872...) MEDICAL DEVICES DENTAL DEVICES Diagnostic Devices § 872.1905 Dental x-ray film holder. (a) Identification. A dental x-ray film holder is a device intended to position and to hold x-ray film inside the...

  18. Methods used by Dental Practice-Based Research Network (DPBRN) dentists to diagnose dental caries

    PubMed Central

    Gordan, Valeria V.; Riley, Joseph L; Carvalho, Ricardo M.; Snyder, John; Sanderson, James L; Anderson, Mary; Gilbert, Gregg H.

    2010-01-01

    Objectives To (1) identify the methods that dentists in The Dental Practice-Based Research Network (DPBRN) use to diagnose dental caries; (2) quantify their frequency of use; and (3) test the hypothesis that certain dentist and dental practice characteristics are significantly associated with their use. Methods A questionnaire about methods used for caries diagnosis was sent to DPBRN dentists who reported doing at least some restorative dentistry; 522 dentists participated. Questions included use of dental radiographs, dental explorer, laser fluorescence, air-drying, fiber optic devices, and magnification, as used when diagnosing primary, secondary/recurrent, or non-specific caries lesions. Variations on the frequency of their use were tested using multivariate analysis and Bonferroni tests. Results Overall, the dental explorer was the instrument most commonly used to detect primary occlusal caries as well as to detect caries at the margins of existing restorations. In contrast, laser fluorescence was rarely used to help diagnose occlusal primary caries. For proximal caries, radiographs were used to help diagnose 75-100% of lesions by 96% of the DPBRN dentists. Dentists who use radiographs most often to assess proximal surfaces of posterior teeth, were significantly more likely to also report providing a higher percentage of patients with individualized caries prevention (p = .040) and seeing a higher percentage of pediatric patients (p = .001). Conclusion Use of specific diagnostic methods varied substantially. The dental explorer and radiographs are still the most commonly used diagnostic methods. PMID:21488724

  19. Computerized Tool to Manage Dental Anxiety: A Randomized Clinical Trial.

    PubMed

    Tellez, M; Potter, C M; Kinner, D G; Jensen, D; Waldron, E; Heimberg, R G; Myers Virtue, S; Zhao, H; Ismail, A I

    2015-09-01

    Anxiety regarding dental and physical health is a common and potentially distressing problem, for both patients and health care providers. Anxiety has been identified as a barrier to regular dental visits and as an important target for enhancement of oral health-related quality of life. The study aimed to develop and evaluate a computerized cognitive-behavioral therapy dental anxiety intervention that could be easily implemented in dental health care settings. A cognitive-behavioral protocol based on psychoeducation, exposure to feared dental procedures, and cognitive restructuring was developed. A randomized controlled trial was conducted (N = 151) to test its efficacy. Consenting adult dental patients who met inclusion criteria (e.g., high dental anxiety) were randomized to 1 of 2 groups: immediate treatment (n = 74) or a wait-list control (n = 77). Analyses of covariance based on intention-to-treat analyses were used to compare the 2 groups on dental anxiety, fear, avoidance, and overall severity of dental phobia. Baseline scores on these outcomes were entered into the analyses as covariates. Groups were equivalent at baseline but differed at 1-mo follow-up. Both groups showed improvement in outcomes, but analyses of covariance demonstrated significant differences in dental anxiety, fear, avoidance, and overall severity of dental phobia in favor of immediate treatment at the follow-up assessment. Of the patients who met diagnostic criteria for phobia at baseline, fewer patients in the immediate treatment group continued to meet criteria for dental phobia at follow-up as compared with the wait-list group. A new computer-based tool seems to be efficacious in reducing dental anxiety and fear/avoidance of dental procedures. Examination of its effectiveness when administered in dental offices under less controlled conditions is warranted (ClinicalTrials.gov NCT02081365).

  20. A long-term study of 277 cases of equine sinonasal disease. Part 1: details of horses, historical, clinical and ancillary diagnostic findings.

    PubMed

    Tremaine, W H; Dixon, P M

    2001-05-01

    The clinical and ancillary diagnostic findings in equine sinnasal disease were studied. The diagnoses in 277 referred (1984-1996) cases of equine sinonasal disease included the following (% all cases): 67 cases (24.2%) primary sinusitis, 61 (22.0%) dental sinusitis, 37 (13.4%) sinus cysts, 22 (7.9%) sinonasal neoplasia, 21 (7.6%) progressive ethmoid haematoma, 17 (6.1%) sinonasal trauma, 13 (4.7%) sinonasal mycosis, 11 (4.0%) rostral maxillary cheek tooth infection, 7 (2.5%) sinonasal polyps, 7 (2.5%) cases of nasal epidermal inclusion cysts and 14 (5.1%) miscellaneous sinonasal disorders. Many disorders showed similar clinical signs including nasal discharge (present in 88% of all cases) and facial swelling (46%). Most disorders were chronic, with a median duration of signs of 12 weeks (range 3 days- 6 years) prior to referral. Sinus cysts and sinonasal neoplasia were significantly (P<0.05) more frequently associated with gross distortion of the nasal passages and facial bones than the other sinonasal disorders. Endoscopic changes were detected per nasum in 91% of cases, but contributed to the exact diagnosis in only 20%. Radiography revealed abnormalities in 81% of cases but was diagnostically useful in only 36%. Sinoscopy was diagnostically useful in 70% of the 61 cases where used.

  1. Accuracy in the Diagnosis of the Mental Nerve Loop. A Comparative Study Between Panoramic Radiography and Cone Beam Computed Tomography

    PubMed Central

    do Couto-Filho, Carlos Eduardo Gomes; de Moraes, Paulo Hemerson; Alonso, Maria Beatriz Carrazzone; Haiter-Neto, Francisco; Olate, Sergio; de Albergaria-Barbosa, José Ricardo

    2016-01-01

    Summary Dental implant and chin osteotomy are executed on the mandible body and the mental nerve is an important anatomical limit. The aim of this research was to know the position of the mental nerve loop comparing result in panoramic radiography and cone beam computed tomography. We analyzed 94 hemimandibles and the patient sample comprised female and male subjects of ages ranging from 18 to 52 years (mean age, 35 years) selected randomly from the database of patients at the Division of Oral Radiology at Piracicaba Dental School State University of Campinas; the anterior loop (AL) of the mental nerve was evaluated regarding the presence or absence, which was classified as rectilinear or curvilinear and measurement of its length was obtained. The observations were made in the digital panoramic radiography (PR) and the cone beam computed tomography (CBCT) according to a routine technique. The frequencies of the AL identified through PR and CBCT were different: in PR the loop was identified in 42.6% of cases, and only 12.8% were bilateral. In contrast, the AL was detected in 29.8% of the samples using CBCT, with 6.4% being bilateral; Statistical comparison between PR and CBCT showed that the PR led to false-positive diagnosis of the AL in this sample. According to the results of this study, the frequency of AL is low. Thus, it can be assumed that it is not a common condition in this population. PMID:27667898

  2. Child Indicators: Dental Health.

    ERIC Educational Resources Information Center

    Lewit, Eugene M.; Kerrebrock, Nancy

    1998-01-01

    Reviews measures of dental health in children and the evidence on child dental health. Although children's dental health has improved over the past two decades, many poor children do not receive necessary dental health services, and reasons for this failure are summarized. (SLD)

  3. Weaker dental enamel explains dental decay.

    PubMed

    Vieira, Alexandre R; Gibson, Carolyn W; Deeley, Kathleen; Xue, Hui; Li, Yong

    2015-01-01

    Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is "weaker" while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution.

  4. An explanation for the extremely low, but variable, radiation dosages measured in a linear slit scanning radiography system

    NASA Astrophysics Data System (ADS)

    Potgieter, J. H.; de Villiers, Mattieu; Scheelke, Martin; de Jager, Gerhard

    2005-04-01

    Clinical trials performed for the FDA"s Section 510k compliance submission of the Statscan digital, full-body, linear slit scanning diagnostic radiography system revealed that comparable diagnostic results with a commercial full-field screen film device were obtained with the Statscan using much lower radiation doses. For certain imaging procedures the doses for Statscan were as much as twenty to thirty times lower. However the results varied by a large amount and in particular the results for chest radiographs were anomalous in that the Statscan dose was less reduced. Whilst it is well known that slit scanning radiography has considerably lower radiation exposure than full-field devices due to its much lower scatter to primary ratio and also that digital radiography has the potential for lower radiation dosages, it was thought that that this alone did not fully account for the dose differences. This paper suggests that these dose differences, including the anomaly mentioned above, can be explained by considering the unique way that slit scanning is undertaken by Statscan i.e. by scanning the tube, detector, slit and collimators together along a linear path. The effect on measured skin entrance doses is explained and the dosage differences as affected by digital technology, higher DQE, slit scanning (low scatter to primary ratio) and linear slit scanning methods are quantified. Furthermore it is explained how the Statscan geometry leads an improved "skin sparing" effect.

  5. Dental education in Colombia

    PubMed Central

    Jaramillo, Jorge A.; Pulido, Jairo H. Ternera; Núñez, Jaime A. Castro; Bird, William F.; Komabayashi, Takashi

    2014-01-01

    This article describes Colombia's development of formal dentistry, its dental school system, curriculum, and dental licensure, and current issues in oral health care. In 1969, there were only 4 dental schools in Colombia; at this writing there are 21. Five dental schools are public and the other 16 are private. Nearly all classes are conducted in Spanish. Undergraduate pre-dental coursework is not a prerequisite for dental school in Colombia. To obtain licensure, Colombian dental students must complete 5 years of study in dental school, earn a diploma, and work for the government for 1 year. There are approximately 41,400 dentists in Colombia, and the number is increasing quickly. However, the unemployment rate among dentists is very high, even though graduation from dental school is extremely difficult. Although the 1,100:1 ratio of citizens to dentists is considered satisfactory, access to dental care is limited due to the high rate of poverty. PMID:20339245

  6. Effective doses from panoramic radiography and CBCT (cone beam CT) using dose area product (DAP) in dentistry

    PubMed Central

    Shin, H S; Nam, K C; Park, H; Choi, H U; Kim, H Y

    2014-01-01

    Objectives: We compared the effective dose from panoramic radiography with that from cone beam CT (CBCT) using dose area product under adult and child exposure conditions. Methods: The effective doses of the cephalo, panorama, implant and dental modes of Alphard 3030 (Asahi Roentgen Ind., Co. Ltd, Kyoto, Japan) CBCT and the Jaw, Wide, Facial and temporomandibular joint modes of Rayscan Symphony (RAY Co., Ltd, Hwaseong, Republic of Korea) CBCT were compared with those of CRANEX® 3+ CEPH (Soredex Orion Corporation, Helsinki, Finland) panoramic radiography equipment under adult and child exposure conditions. Each effective dose was calculated using a conversion formula from dose area product meter measured values (VacuTec Messtechnik GmbH, Dresden, Germany). The conversion formulae used were suggested by Helmrot and Alm Carlsson and Batista et al, and they were applied with the tube voltage taken into consideration. Results: The maximum effective doses from the Alphard 3030 and Rayscan Symphony were 67 and 21 times greater than that from panoramic radiography, respectively. The ratios of the effective dose under the child setting to that under the adult condition were 0.60–0.62 and 0.84–0.95, and the maximum differences in effective doses between the adult and child exposure settings were equivalent to 27 and 4 times greater than a panoramic examination in the Alphard 3030 and Rayscan Symphony, respectively. Conclusions: The effective CBCT doses were higher than those of panoramic radiography. The differences in effective doses between the adult and child CBCT settings were dependent on equipment type and exposure parameters. Therefore, adequate mode selection and control of exposure as well as further research are necessary to minimize the effective dose to patients, especially for radiosensitive children. PMID:24845340

  7. Digital mammography performed with computed radiography technology.

    PubMed

    Jouan, B

    1999-07-01

    Introduced by Fuji Photo Film Japan in the early 1980s, computed radiography (CR) technology has developed considerably since then to become the mature widely installed technology it is today (about 7500 systems worldwide). Various mammographic examinations require high performance results to which CR complies on demand or following some procedures such as geometrical magnification carried out during the examination. The basic CR principles and digital image processing as well as technical improvements are detailed in this study, which also includes a synthesis of the articles on CR mammographic applications referenced in the bibliography, focusing on strong points, limits and current methods of surpassing these limits. New CR technology development perspectives in mammography and computed assisted diagnosis (CAD) algorithms will allow wider use of this method in the near future.

  8. Measuring microfocus focal spots using digital radiography

    SciTech Connect

    Fry, David A

    2009-01-01

    Measurement of microfocus spot size can be important for several reasons: (1) Quality assurance during manufacture of microfocus tubes; (2) Tracking performance and stability of microfocus tubes; (3) Determining magnification (especially important for digital radiography where the native spatial resolution of the digital system is not adequate for the application); (4) Knowledge of unsharpness from the focal spot alone. The European Standard EN 12543-5 is based on a simple geometrical method of calculating focal spot size from unsharpness of high magnification film radiographs. When determining microfocus focal spot dimensions using unsharpness measurements both signal-to-noise (SNR) and magnification can be important. There is a maximum accuracy that is a function of SNR and therefore an optimal magnification. Greater than optimal magnification can be used but it will not increase accuracy.

  9. Polarized neutron radiography with a periscope

    NASA Astrophysics Data System (ADS)

    Schulz, Michael; Neubauer, Andreas; Mühlbauer, Martin; Calzada, Elbio; Schillinger, Burkhard; Pfleiderer, Christian; Böni, Peter

    2010-01-01

    The interaction of the magnetic moment of the neutron with magnetic fields provides a powerful probe for spatially resolved magnetisation measurements in magnetic materials. We have tested a periscope as a new type of polarizer providing neutron beams with a high polarization and a low divergence. The observed inhomogeneity of the beam caused by the waviness of the glass substrates was quantified by means of Monte-Carlo simulations using the software package McStas. The results show that beams of high homogeneity can be produced if the waviness is reduced to below 1.0·10-5 rad. Finally, it is shown that radiography with polarized neutrons is a powerful method for measuring the spatially resolved magnetisation in optically float-zoned samples of the weak itinerant ferromagnet Ni3Al, thereby aiding the identification of the appropriate growth parameters.

  10. Direct magnification radiography of the newborn infant

    SciTech Connect

    Brasch, R.C.; Gould, R.G.

    1982-03-01

    Recent advances in technology have made direct radiographic magnification of the newborn infant clinically feasible. A microfocus radiographic tube and a rare-earth, high-speed recording system were combined to obtain more than 2,000 radiographs at magnifications of 2-2.5. Special positioning devices permitted imaging of even those infants confined to incubators and connected to life-supporting systems. When quantitatively compared with three conventional contact radiographic systems with respect to resolution, contrast, and noise, magnification radiography showed overall superiority of image characteristics. Definition of subtle abnormalities and anatomically small structures permitted diagnoses which could not be made from conventional images. Furthermore, infant radiation exposure was markedly less (15 mR (3.9 mC/kg) maximum skin exposure) as compared with conventional contact radiographic systems (24 mR (6.1 mC/kg) to 45 mR (11.6 mC/kg)).

  11. Direct magnification radiography of the newborn infant

    SciTech Connect

    Brasch, R.C.; Gould, R.G.

    1982-03-01

    Recent advances in technology have made direct radiographic magnification of the newborn infant clinically feasible. A microfocus radiographic tube and a rare-earth, high-speed recording system were combined to obtain more than 2,000 radiographs at magnifications of 2 to 2.5. Special positioning devices permitted imaging of even those infants confined to incubators and connected to life-supporting systems. When quantitatively compared with three conventional contact radiographic systems with respect to resolution, contrast, and noise, magnification radiography showed overall superiority of image characteristics. Definition of subtle abnormalities and anatomically small structures permitted diagnoses which could not be made from conventional images. Furthermore, infant radiation exposure was markedly less (15 mR (3.9 mC/kg) maximum skin exposure) as compared with conventional contact radiographic systems (24 mR(6.1 mC/kg) to 45 mR (11.6 mC/kg)).

  12. Digital radiography exposure indices: A review

    SciTech Connect

    Mothiram, Ursula; Brennan, Patrick C; Lewis, Sarah J; Moran, Bernadette; Robinson, John

    2014-06-15

    Digital radiography (DR) technologies have the advantage of a wide dynamic range compared to their film-screen predecessors, however, this poses a potential for increased patient exposure if left unchecked. Manufacturers have developed the exposure index (EI) to counter this, which provides radiographers with feedback on the exposure reaching the detector. As these EIs were manufacturer-specific, a wide variety of EIs existed. To offset this, the international standardised EI has been developed by the International Electrotechnical Commission (IEC) and the American Association of Physicists in Medicine (AAPM). The purpose of this article is to explore the current literature relating to EIs, beginning with the historical development of the EI, the development of the standardised EI and an exploration of common themes and studies as evidenced in the research literature. It is anticipated that this review will provide radiographers with a useful guide to understanding EIs, their application in clinical practice, limitations and suggestions for further research.

  13. Fragile X syndrome: panoramic radiographic evaluation of dental anomalies, dental mineralization stage, and mandibular angle

    PubMed Central

    Sabbagh-Haddad, Aida; Haddad, Denise Sabbagh; Michel-Crosato, Edgard; Arita, Emiko Saito

    2016-01-01

    ABSTRACT Fragile X syndrome (FXS) is a disorder linked to the chromosome X long arm (Xq27.3), which is identified by a constriction named fragile site. It determines various changes, such as behavioral or emotional problems, learning difficulties, and intellectual disabilities. Craniofacial abnormalities such as elongated and narrow face, prominent forehead, broad nose, large and prominent ear pavilions, strabismus, and myopia are frequent characteristics. Regarding the oral aspects, deep and high-arched palate, mandibular prognathism, and malocclusion are also observed. Objective: The purpose of this study was to evaluate the dental radiographic characteristics as described in 40 records of patients with panoramic radiography. Material and Methods: The patients were in the range of 6–17 years old, and were divided into two groups (20 subjects who were compatible with the normality standard and 20 individuals diagnosed with the FXS), which were matched for gender and age. Analysis of the panoramic radiographic examination involved the evaluation of dental mineralization stage, mandibular angle size, and presence of dental anomalies in both deciduous and permanent dentitions. Results: The results of radiographic evaluation demonstrated that the chronology of tooth eruption of all third and second lower molars is anticipated in individuals with FXS (p<0.05). In this group, supernumerary deciduous teeth (2.83%), giroversion of permanent teeth (2.31%), and partial anodontia (1.82%) were the most frequent dental anomalies. In addition, an increase was observed in the mandibular angle size in the FXS group (p<0.05). Conclusion: We conclude that knowledge of dental radiographic changes is of great importance for dental surgeons to plan the treatment of these individuals. PMID:27812623

  14. Atypical Forensic Dental Identifications.

    PubMed

    Cardoza, Anthony R; Wood, James D

    2015-06-01

    Forensic dental identification specialists are typically the last conventional option for postmortem identification. Forensic dental identification is most often accomplished by comparing radiographs of the decedent's teeth with the dental radiographs obtained from the dentist of the suspected victim. Unfortunately, antemortem dental radiographs are not always available. When presented with this challenge, the authors of this article have been successful in completing identifications using means other than dental radiographic comparison.

  15. Muscle parameters estimation based on biplanar radiography.

    PubMed

    Dubois, G; Rouch, P; Bonneau, D; Gennisson, J L; Skalli, W

    2016-11-01

    The evaluation of muscle and joint forces in vivo is still a challenge. Musculo-Skeletal (musculo-skeletal) models are used to compute forces based on movement analysis. Most of them are built from a scaled-generic model based on cadaver measurements, which provides a low level of personalization, or from Magnetic Resonance Images, which provide a personalized model in lying position. This study proposed an original two steps method to access a subject-specific musculo-skeletal model in 30 min, which is based solely on biplanar X-Rays. First, the subject-specific 3D geometry of bones and skin envelopes were reconstructed from biplanar X-Rays radiography. Then, 2200 corresponding control points were identified between a reference model and the subject-specific X-Rays model. Finally, the shape of 21 lower limb muscles was estimated using a non-linear transformation between the control points in order to fit the muscle shape of the reference model to the X-Rays model. Twelfth musculo-skeletal models were reconstructed and compared to their reference. The muscle volume was not accurately estimated with a standard deviation (SD) ranging from 10 to 68%. However, this method provided an accurate estimation the muscle line of action with a SD of the length difference lower than 2% and a positioning error lower than 20 mm. The moment arm was also well estimated with SD lower than 15% for most muscle, which was significantly better than scaled-generic model for most muscle. This method open the way to a quick modeling method for gait analysis based on biplanar radiography.

  16. [Dental survey of Down syndrome patients. Reflections and synthesis].

    PubMed

    Bianchi, A M; Cuevas, A; Jaramillo, R J

    1991-01-01

    This article presents a work made in year 1990 in the Asociación Odontológica Argentina, in a population of 192 persons with Down's Syndrome. The results were controlled with other Group (Control Group), taken as reference, same number of people, sex and age, not Down's Syndrome diagnostic. Age between 3 and 26 years-old. The examination evaluates: dental caries occurrence, filling and lost teeth, oral hygiene, diet and type of dental treatment received. The report illustrates the differences between the dental health care and dental treatment, in the population with Down's Syndrome and the control Group. The author calls the attention to dental profession to colaborate in the dental health care of Down's Syndrome population.

  17. Patient exposures in Saudi diagnostic radiology

    NASA Astrophysics Data System (ADS)

    Ayad, M.; Melibary, Abdulrahman; Malabary, Tajuddin

    1994-07-01

    Diagnostic X-ray radiography patients exposures have been studied during 1412 (H) (1992) in the Riyadh area, Kingdom of Saudi Arabia. Dose imparted as well as doses to the thyroid, breast, lung, bone marrow, ovary and testis have been calculated for many types of radiographic examinations, Collective doses have been calculated. The dose imparted corresponds to an annual absorbed dose to the Saudi population, in the Riyadh area, of about 280 μGy, and a genetically significant dose of 108.8 μGy per person per year due to diagnostic radiology.

  18. The Enhanced Workflow and Efficiency of the Wireless Local Area Network (WLAN)-Based Direct Digital Radiography (DDR) Portable Radiography.

    PubMed

    Ngan, Tsz-Lung; Wong, Edward Ting-Hei; Ng, Kris Lap-Shun; Jeor, Patrick Kwok-Shing; Lo, Gladys Goh

    2015-06-01

    With the implementation of the PACS in the hospital, there is an increasing demand from the clinicians for immediate access and display of radiological images. Recently, our hospital has installed the first wireless local area network (WLAN)-based direct digital radiography (DDR) portable radiography system. The DDR portable radiography system allows wireless retrieval of modality worklist and wireless transmission of portable X-ray image on the console to the Picture Archiving and Communication System (PACS), via WLAN connection of wireless fidelity (Wi-Fi). The aim of this study was to analyze the workflow and performance between the WLAN-based DDR portable radiography system and the old practice using conventional portable X-ray machine with computed radiography (CR) system. A total of 190 portable chest X-ray examinations were evaluated and timed, using the conventional portable X-ray machine with CR from March to April of 2012 and using the new DDR portable radiography system on December of 2012 (n = 97 for old system and n = 93 for DDR portable system). The time interval of image becoming available to the PACS using the WLAN-based DDR portable radiography system was significantly shorter than that of the old practice using the conventional portable X-ray machine with CR (6.8 ± 2.6 min for DDR portable system; 23 ± 10.2 min for old system; p < 0.0001), with the efficiency improved by 70 %. The implementation of the WLAN-based DDR portable radiography system can enhance the workflow of portable radiography by reduction of procedural steps.

  19. Dosimetric analysis of the use of CBCT in diagnostic radiology: sinus and middle ear.

    PubMed

    Dierckx, D; Saldarriaga Vargas, C; Rogge, F; Lichtherte, S; Struelens, L

    2015-01-01

    The use of cone beam computed tomography (CBCT) in diagnostic radiology departments is increasing. Several discussions arise whether with the CBCT application, some multi-slice CT (MSCT) examinations can be replaced by it. High hopes are set regarding the dosimetric aspects of CBCT: are patient doses in between those of conventional X-rays and MSCT? In this study, effective dose and organ doses were evaluated for two non-dental CBCT examinations: sinus and middle ear. A comparison with the dose obtained with a MSCT protocol was performed. Moreover, the sinus examination was also compared with the dose obtained by projection radiography (RX). Effective doses were estimated from thermoluminescent detector dose measurements in an anthropomorphic phantom and were compared against Monte Carlo simulations. Results show that the effective dose for the sinus examination is more than three times higher with MSCT than with CBCT and about five times lower with RX compared with CBCT, whereas for the middle ear examination, the effective dose obtained with MSCT is almost six times higher than that of CBCT. Finally, a sensitivity study on the size and position of the CBCT field of view showed the influence of these two factors on the dose received by the patient.

  20. 5. INTERIOR VIEW, SHOWING A CONTROL ROOM INSIDE THE RADIOGRAPHY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. INTERIOR VIEW, SHOWING A CONTROL ROOM INSIDE THE RADIOGRAPHY ROOM; PASS-THROUGH FOR EXPOSED FILM ON RIGHT - Fort McCoy, Building No. T-1031, North side of South Tenth Avenue, Block 10, Sparta, Monroe County, WI

  1. Radiography with the Fission Neutrons from Californium-252

    DTIC Science & Technology

    1977-07-01

    iftD-Ao45 3^ m-77-B1i2i TECHNICAL 7󈧖 LIBRARY lADfto^^^ RADIOGRAPHY WITH THE FISSION NEUTRONS FROM CALIFORNIUM -252 JOHN J. ANTAL and...TITLE C«id Sub(l(/«J RADIOGRAPHY WITH THE FISSION NEUTRONS FROM CALIFORNIUM -252 5. TYPE OF REPORT it PERIOD COVERED Final Report 6...Cellulose nitrate Californium -252 20. ABSTRACT (Continue on reverse aide 11 necessary and identity by block number) (SEE REVERSE SIDE) DD 1

  2. Electronic intraoral dental x-ray imaging system employing a direct sensing CCD array

    SciTech Connect

    Cox, J.D.; Langford, D.S.; Williams, D.W.

    1993-12-31

    A commercial prototype intraoral radiography system has been developed that can provide digital x-ray images for diagnosis. The system consists of an intraoral detector head, an intermediate drive electronics package, a main drive electronics package and a PC-based digital image management system. The system has the potential to replace the use of dental film in intraoral radiographic examinations. High-resolution images are acquired, then displayed on a CRT within seconds of image acquisition.

  3. Ultrasonography in the diagnosis of nasal bone fractures: a comparison with conventional radiography and computed tomography.

    PubMed

    Lee, In Sook; Lee, Jung-Hoon; Woo, Chang-Ki; Kim, Hak Jin; Sol, Yu Li; Song, Jong Woon; Cho, Kyu-Sup

    2016-02-01

    The purpose of this study was to evaluate and compare the diagnostic efficacy of ultrasonography (US) with radiography and multi-detector computed tomography (CT) for the detection of nasal bone fractures. Forty-one patients with a nasal bone fracture who underwent prospective US examinations were included. Plain radiographs and CT images were obtained on the day of trauma. For US examinations, radiologist used a linear array transducer (L17-5 MHz) in 24 patients and hockey-stick probe (L15-7 MHz) in 17. The bony component of the nose was divided into three parts (right and left lateral nasal walls, and midline of nasal bone). Fracture detection by three modalities was subjected to analysis. Furthermore, findings made by each modality were compared with intraoperative findings. Nasal bone fractures were located in the right lateral wall (n = 28), midline of nasal bone (n = 31), or left lateral wall (n = 31). For right and left lateral nasal walls, CT had greater sensitivity and specificity than US or radiography, and better agreed with intraoperative findings. However, for midline fractures of nasal bone, US had higher specificity, positive predictive value, and negative predictive value than CT. Although two US evaluations showed good agreements at all three sites, US findings obtained by the hockey-stick probe showed closer agreement with intraoperative findings for both lateral nasal wall and midline of nasal bone. Although CT showed higher sensitivity and specificity than US or radiography, US found to be helpful for evaluating the midline of nasal bone. Furthermore, for US examinations of the nasal bone, a smaller probe and higher frequency may be required.

  4. Neutron radiography inspection of investment castings.

    PubMed

    Richards, W J; Barrett, J R; Springgate, M E; Shields, K C

    2004-10-01

    Investment casting, also known as the lost wax process, is a manufacturing method employed to produce near net shape metal articles. Traditionally, investment casting has been used to produce structural titanium castings for aero-engine applications with wall thickness less than 1 in (2.54 cm). Recently, airframe manufacturers have been exploring the use of titanium investment casting to replace components traditionally produced from forgings. Use of titanium investment castings for these applications reduces weight, cost, lead time, and part count. Recently, the investment casting process has been selected to produce fracture critical structural titanium airframe components. These airframe components have pushed the traditional inspection techniques to their physical limits due to cross sections on the order of 3 in (7.6 cm). To overcome these inspection limitations, a process incorporating neutron radiography (n-ray) has been developed. In this process, the facecoat of the investment casting mold material contains a cocalcined mixture of yttrium oxide and gadolinium oxide. The presence of the gadolinium oxide, allows for neutron radiographic imaging (and eventual removal and repair) of mold facecoat inclusions that remain within these thick cross sectional castings. Probability of detection (POD) studies have shown a 3 x improvement of detecting a 0.050 x 0.007 in2 (1.270 x 0.178 mm2) inclusion of this cocalcined material using n-ray techniques when compared to the POD using traditional X-ray techniques. Further, it has been shown that this n-ray compatible mold facecoat material produces titanium castings of equal metallurgical quality when compared to the traditional materials. Since investment castings can be very large and heavy, the neutron radiography facilities at the University of California, Davis McClellan Nuclear Radiation Center (UCD/MNRC) were used to develop the inspection techniques. The UCD/MNRC has very unique facilities that can handle large

  5. Team approach between prosthodontics and dental technology.

    PubMed

    Pietrobon, Nicola; Malament, Kenneth A

    2007-01-01

    A collaborative relationship between prosthodontists and dental technicians can greatly improve the esthetic and functional results of restorations. When each discipline takes the time to understand the strengths and challenges of the other, together they can formulate a treatment plan that will culminate in a successful result. The diagnostic waxup gives the dental team a three-dimensional illustration of the problem and allows the patient to view the problem and discuss solutions. Intraoral records taken by the prosthodontist are used with the technician's centric relation jigs to properly mount the casts. When the prosthodontist and technician agree on materials to be used in the fabrication of the provisional prosthesis and master dies, more accurate and functional results are achieved. Of special interest are the tooth preparations: The shape of the margins can enable the dental technician to easily create an accurate restoration. A treatment waxup allows full communication of information about the restoration between the prosthodontist, dental technician, and patient, ensuring that all three parties are satisfied with the look and function before the definitive restoration is made. The type of material and the color properties for the definitive restoration are of utmost importance, and the combined skills and experience of the prosthodontist and dental technician can create an excellent result. This article defines specific points in the restorative process when a collaborative effort between the prosthodontist and the dental technician dramatically improve the end result.

  6. Dental Auxiliary Occupations. Interim Report.

    ERIC Educational Resources Information Center

    Kingston, Richard D.

    As part of a dental auxiliaries project, a Dental Auxiliary National Technical Advisory Committee was established, and its major undertaking was to assist in the development of a functional inventory for each of the three dental auxiliary occupations (dental assisting, dental hygiene, and dental laboratory technology). The analysis consisted of…

  7. Fuel-motion diagnostics and cineradiography

    SciTech Connect

    DeVolpi, A.

    1982-09-01

    Nuclear and non-nuclear applications of cineradiography are reviewed, with emphasis on diagnostic instrumentation for in-pile transient-reactor safety testing of nuclear fuel motion. The primary instrument for this purpose has been the fast-neutron hodoscope, which has achieved quantitative monitoring of time, location, mass, and velocity of fuel movement under the difficult conditions associated with transient-reactor experiments. Alternative diagnostic devices that have been developed have not matched the capabilities of the hodoscope. Other applications for the fuel-motion diagnostic apparatus are also evolving, including time-integrated radiography and direct time- and space-resolved fuel-pin power monitoring. Although only two reactors are now actively equipped with high-resolution fuel-motion diagnostic systems, studies and tests have been carried out in and for many other reactors.

  8. [Dental caries of the developmental age as a civilization disease].

    PubMed

    Wójcicka, Anna; Zalewska, Magdalena; Czerech, Ewa; Jabłoński, Robert; Grabowska, Stanisława Zyta; Maciorkowska, Elzbieta

    2012-01-01

    According to the definition of the World Health Organization (WHO), dental caries is a local pathological process of the extrasomatic background, leading to enamel decalcification, decomposition of dental hard tissue, and in consequence to formation of a dental cavity. Morbidity of dental caries increases with age, reaching 100% of children, aged from 6 to 7. Poland is one of few European countries where the incidence of dental caries in children did not decrease, despite recommendations of WHO for 2000 year, aimed at the decrease in the incidence of dental caries among 6-year-old children to the level of 50%. The recommendation of WHO for 2015 year is to reduce the incidence of dental caries to 30% among 6-year-olds, i.e., 70% of 6 year-old children should be free of dental caries. Apart from genetic conditioning, inappropriate health behaviors, nutritional habits and gastroesophageal reflux disease influence the development of dental caries. Consumption of 'fast food' and drinking sweetened beverages of low pH contribute markedly to the development of dental caries, decreasing simultaneously consumption of pro healthy foods, including milk and cereals. Taking into consideration perspective clinical examinations of children and adolescents, evaluating the relationship between dental caries and nutritional habits as well as environmental conditioning, the study shows current data about factors, contributing to the incidence of dental caries in children, collected from the literature. The attention was paid to the relationship between dental caries and gastroesophageal reflux disease and the necessity of its early diagnostics and proper treatment.

  9. Patient information extraction in digitized radiography.

    PubMed

    Wu, Hsien-Huang P

    2002-03-01

    Digital imagery is gradually replacing the traditional radiograph with the development of digital radiography and film scanner. This report presents a new method to extract the patient information number (PIN) field automatically from the film-scanned image using image analysis technique. To evaluate the PIN field extraction algorithm, 2 formats of label acquired from 2 different hospitals are tested. Given the available films with no constraints on the way the labels are written and positioned, the correct extraction rates are 73% and 84%, respectively. This extracted PIN information can link with Radiology Information System (RIS) or Hospital Information System (HIS), and the image scanned from the film then can be filed into the database automatically. The efficiency this method offers can simplify greatly the image filing process and improve the user friendliness of the overall image digitization system. Moreover, compared with the bar code reader, it solves the automatic information input problem in a very economical way. The authors believe the success of this technique will benefit the development of the PACS (Picture Archiving and Communication System) and teleradiology.

  10. Developments in digital radiography: an equipment update.

    PubMed

    James, J J; Davies, A G; Cowen, A R; O'Connor, P J

    2001-01-01

    Digital X-ray imaging technology has advanced rapidly over the past few years. This review, particularly aimed at those involved in using and purchasing such technology, is an attempt to unravel some of the complexities of this potentially confusing subject. The main groups of X-ray imaging devices that are considered are digitisers of conventional radiographs, image-intensifier-based fluorography systems, photostimulable phosphor computed radiography, amorphous selenium-based technology for thorax imaging and flat-panel systems. As well as describing these different systems, we look at ways of objectively assessing their image quality. Concepts that are used and explained include spatial resolution, grey-scale bit resolution, signal-to-noise ratio and detective quantum efficiency. An understanding of these basic parameters is vital in making a scientific assessment of a system's performance. Image processing and techniques are also briefly discussed, particularly with reference to their potential effects on image quality. This review aims to provide a basic understanding of digital X-ray imaging technology and enables the reader to make an independent and educated assessment of the relative merits of each system.

  11. Applications of Cosmic Ray Muon Radiography

    NASA Astrophysics Data System (ADS)

    Guardincerri, E.; Durham, J. M.; Morris, C. L.; Rowe, C. A.; Poulson, D. C.; Bacon, J. D.; Plaud-Ramos, K.; Morley, D. J.

    2015-12-01

    The Dome of Santa Maria del Fiore, Florence Cathedral, was built between 1420 and 1436 by architect Filippo Brunelleschi and it is now cracking under its own weight. Engineering efforts are underway to model the dome's structure and reinforce it against further deterioration. According to some scholars, Brunelleschi might have built reinforcement structures into the dome itself; however, the only confirmed known subsurface reinforcement is a chain of iron and stone around the dome's base. Tomography with cosmic ray muons is a non-destructive imaging method that can be used to image the interior of the wall and therefore ascertain the layout and status of any iron substructure in the dome. We will show the results from a muon tomography measurement of iron hidden in a mockup of the dome's wall performed at Los Alamos National Lab in 2015. The sensitivity of this technique, and the status of this project will be also discussed. At last, we will show results on muon attenuation radiography of larger shallow targets.

  12. Portable Digital Radiography and Computed Tomography Manual

    SciTech Connect

    Not Available

    2007-11-01

    This user manual describes the function and use of the portable digital radiography and computed tomography (DRCT) scanner. The manual gives a general overview of x-ray imaging systems along with a description of the DRCT system. An inventory of the all the system components, organized by shipping container, is also included. In addition, detailed, step-by-step procedures are provided for all of the exercises necessary for a novice user to successfully collect digital radiographs and tomographic images of an object, including instructions on system assembly and detector calibration and system alignment. There is also a short section covering the limited system care and maintenance needs. Descriptions of the included software packages, the DRCT Digital Imager used for system operation, and the DRCT Image Processing Interface used for image viewing and tomographic data reconstruction are given in the appendixes. The appendixes also include a cheat sheet for more experienced users, a listing of known system problems and how to mitigate them, and an inventory check-off sheet suitable for copying and including with the machine for shipment purposes.

  13. Beam Characterization at the Neutron Radiography Facility

    SciTech Connect

    Sarah Morgan; Jeffrey King

    2013-01-01

    The quality of a neutron imaging beam directly impacts the quality of radiographic images produced using that beam. Fully characterizing a neutron beam, including determination of the beam’s effective length-to-diameter ratio, neutron flux profile, energy spectrum, image quality, and beam divergence, is vital for producing quality radiographic images. This project characterized the east neutron imaging beamline at the Idaho National Laboratory Neutron Radiography Reactor (NRAD). The experiments which measured the beam’s effective length-to-diameter ratio and image quality are based on American Society for Testing and Materials (ASTM) standards. An analysis of the image produced by a calibrated phantom measured the beam divergence. The energy spectrum measurements consist of a series of foil irradiations using a selection of activation foils, compared to the results produced by a Monte Carlo n-Particle (MCNP) model of the beamline. Improvement of the existing NRAD MCNP beamline model includes validation of the model’s energy spectrum and the development of enhanced image simulation methods. The image simulation methods predict the radiographic image of an object based on the foil reaction rate data obtained by placing a model of the object in front of the image plane in an MCNP beamline model.

  14. TU-F-9A-01: Balancing Image Quality and Dose in Radiography

    SciTech Connect

    Peck, D; Pasciak, A

    2014-06-15

    Emphasis is often placed on minimizing radiation dose in diagnostic imaging without a complete consideration of the effect on image quality, especially those that affect diagnostic accuracy. This session will include a patient image-based review of diagnostic quantities important to radiologists in conventional radiography, including the effects of body habitus, age, positioning, and the clinical indication of the exam. The relationships between image quality, radiation dose, and radiation risk will be discussed, specifically addressing how these factors are affected by image protocols and acquisition parameters and techniques. This session will also discuss some of the actual and perceived radiation risk associated with diagnostic imaging. Regardless if the probability for radiation-induced cancer is small, the fear associated with radiation persists. Also when a risk has a benefit to an individual or to society, the risk may be justified with respect to the benefit. But how do you convey the risks and the benefits to people? This requires knowledge of how people perceive risk and how to communicate the risk and the benefit to different populations. In this presentation the sources of errors in estimating risk from radiation and some methods used to convey risks are reviewed. Learning Objectives: Understand the image quality metrics that are clinically relevant to radiologists. Understand how acquisition parameters and techniques affect image quality and radiation dose in conventional radiology. Understand the uncertainties in estimates of radiation risk from imaging exams. Learn some methods for effectively communicating radiation risk to the public.

  15. Dental Exam for Children

    MedlinePlus

    ... and thumb sucking Toddlers, school-age children and adolescents During each regular checkup, the dentist or hygienist ... dental hygienist about proper oral health care for adolescents. American Dental Hygienists' Association. http://www.adha.org/ ...

  16. About Dental Amalgam Fillings

    MedlinePlus

    ... documents in the Related Resources section. Why is mercury used in dental amalgam? Approximately half of a ... about bioaccumulation, please see Related Resources. Is the mercury in dental amalgam the same as the mercury ...

  17. 75 FR 33169 - Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-11

    ...-AG21 Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation of Special Controls for Dental Amalgam, Mercury, and Amalgam Alloy; Technical Amendment AGENCY: Food... classified dental amalgam as a class II device, reclassified dental mercury from class I to class II,...

  18. Dental Pulp Testing: A Review

    PubMed Central

    Chen, Eugene; Abbott, Paul V.

    2009-01-01

    Dental pulp testing is a useful and essential diagnostic aid in endodontics. Pulp sensibility tests include thermal and electric tests, which extrapolate pulp health from sensory response. Whilst pulp sensibility tests are the most commonly used in clinical practice, they are not without limitations and shortcomings. Pulp vitality tests attempt to examine the presence of pulp blood flow, as this is viewed as a better measure of true health than sensibility. Laser Doppler flowmetry and pulse oximetry are examples of vitality tests. Whilst the prospect is promising, there are still many practical issues that need to be addressed before vitality tests can replace sensibility tests as the standard clinical pulp diagnostic test. With all pulp tests, the results need to be carefully interpreted and closely scrutinised as false results can lead to misdiagnosis which can then lead to incorrect, inappropriate, or unnecessary treatment. PMID:20339575

  19. Computerized scheme for lung nodule detection in multi-projection chest radiography

    NASA Astrophysics Data System (ADS)

    Guo, Wei; Li, Qiang; Boyce, Sarah J.; McAdams, H. Page; Shiraishi, Junji; Doi, Kunio; Samei, Ehsan

    2012-03-01

    Our purposes are to develop a conventional computer-aided diagnostic (CAD) scheme and a new fusion CAD scheme for the detection of lung nodules in multi-projection chest radiography, and to verify that information fused from the multi-projection chest radiography can greatly improve the performance of the conventional CAD scheme. The conventional CAD scheme processed each of the three projection images of a subject independently, and discarded the correlation information between the three images. The fusion CAD scheme registered all candidates detected by the conventional CAD scheme in the three images of a subject, and integrated the correlation information between the registered candidates to remove false positives. The CAD schemes were trained and evaluated on a database with 97 subjects. At the sensitivities of 70%, 65% and 60%, the conventional CAD scheme reported 20.4, 13.6 and 8.8 false positives per image, respectively, whereas the fusion CAD scheme reported 4.5, 2.8 and 1.2 false positives per image, respectively. The fusion of correlation information can markedly improve the performance of CAD scheme for lung nodule detection.

  20. Ultrasound versus conventional radiography in the assessment of bone erosions in rheumatoid arthritis.

    PubMed

    Salaffi, Fausto; Gutierrez, Marwin; Carotti, Marina

    2014-01-01

    Bone erosions are the hallmark of joint damage in rheumatoid arthritis and both their detection and increase in number and/or in size are indicative of a poor outcome. To date, conventional radiography is still the most common imaging tool adopted for detecting and scoring joint damage in daily clinical practice, in spite of its low sensitivity with respect computerised tomography, magnetic resonance imaging or ultrasound. Ultrasound is a rapidly evolving technique that is gaining an increasing success in the assessment of patients with rheumatoid arthritis. It permits an early detection and careful characterisation of bone erosions playing a key role in both diagnostic and therapeutic procedures. Ultrasound presents several advantages over other imaging techniques: it is patient-friendly, safe and non-invasive, free of ionising radiation, less expensive, and permit multiple target assessment in real time without the need for external referral. The aim of this review is to compare conventional radiography and ultrasound in the assessment of bone erosions in RA in daily rheumatology practice and to provide insights into which modality can provide the optimal information for a desired outcome in a given clinical trial or practice situation.

  1. Effects of dose reduction on the detectability of standardized radiolucent lesions in digital panoramic radiography.

    PubMed

    Dula, K; Sanderink, G; van der Stelt, P F; Mini, R; Buser, D

    1998-08-01

    Dose reduction in digital panoramic radiography was studied. Intentional underexposure was performed with the Orthophos DS while six different human mandibles were radiographed. Exposure settings were 69 kV/15 mA (standard), 64 kV/16 mA, and 60 kV/16 mA. Standardized spherical defects, each either 1 or 1.25 mm in diameter, were simulated in 288 of 432 images, and seven observers decided whether defects were present or not. Areas under the receiver operating characteristics curves were calculated. They showed no significant differences in the detectability of the 1-mm defect at 69, 64, or 60 kV. For the 1.25-mm defect, no difference was found between the 69 and 60 kV images, but a statistically significant different detectability was found for 64 kV images in comparison with both 69 and 60 kV images. A dose reduction of up to 43% was ascertained with a Pedo-RT-Humanoid phantom when panoramic radiography was performed at 60 kV/16 mA. The conclusion is that with the Orthophos DS, it seems possible to reduce the dose rate of x-rays without loss of diagnostic quality in the case of radiolucent changes.

  2. Digital chest radiography: an update on modern technology, dose containment and control of image quality

    PubMed Central

    Neitzel, Ulrich; Venema, Henk W.; Uffmann, Martin; Prokop, Mathias

    2008-01-01

    The introduction of digital radiography not only has revolutionized communication between radiologists and clinicians, but also has improved image quality and allowed for further reduction of patient exposure. However, digital radiography also poses risks, such as unnoticed increases in patient dose and suboptimum image processing that may lead to suppression of diagnostic information. Advanced processing techniques, such as temporal subtraction, dual-energy subtraction and computer-aided detection (CAD) will play an increasing role in the future and are all targeted to decrease the influence of distracting anatomic background structures and to ease the detection of focal and subtle lesions. This review summarizes the most recent technical developments with regard to new detector techniques, options for dose reduction and optimized image processing. It explains the meaning of the exposure indicator or the dose reference level as tools for the radiologist to control the dose. It also provides an overview over the multitude of studies conducted in recent years to evaluate the options of these new developments to realize the principle of ALARA. The focus of the review is hereby on adult applications, the relationship between dose and image quality and the differences between the various detector systems. PMID:18431577

  3. Sensitivity study of proton radiography and comparison with kV and MV x-ray imaging using GEANT4 Monte Carlo simulations.

    PubMed

    Depauw, Nicolas; Seco, Joao

    2011-04-21

    The imaging sensitivity of proton radiography has been studied and compared with kV and MV x-ray imaging using Monte Carlo simulations. A phantom was specifically modeled using 21 different material inserts with densities ranging from 0.001 to 1.92 g cm(-3). These simulations were run using the MGH double scattered proton beam, scanned pencil proton beams from 200 to 490 MeV, as well as pure 50 keV, 100 keV, 1 MeV and 2 MeV gamma x-ray beams. In order to compare the physics implied in both proton and photon radiography without being biased by the current state of the art in detector technology, the detectors were considered perfect. Along with spatial resolution, the contrast-to-noise ratio was evaluated and compared for each material. These analyses were performed using radiographic images that took into account the following: only primary protons, both primary and secondary protons, and both contributions while performing angular and energetic cuts. Additionally, tissue-to-tissue contrasts in an actual lung cancer patient case were studied for simulated proton radiographs and compared against the original kV x-ray image which corresponds to the current patient set-up image in the proton clinic. This study highlights the poorer spatial resolution of protons versus x-rays for radiographic imaging purposes, and the excellent density resolution of proton radiography. Contrasts around the tumor are higher using protons in a lung cancer patient case. The high-density resolution of proton radiography is of great importance for specific tumor diagnostics, such as in lung cancer, where x-ray radiography operates poorly. Furthermore, the use of daily proton radiography prior to proton therapy would ameliorate patient set-up while reducing the absorbed dose delivered through imaging.

  4. Sensitivity study of proton radiography and comparison with kV and MV x-ray imaging using GEANT4 Monte Carlo simulations

    NASA Astrophysics Data System (ADS)

    Depauw, Nicolas; Seco, Joao

    2011-04-01

    The imaging sensitivity of proton radiography has been studied and compared with kV and MV x-ray imaging using Monte Carlo simulations. A phantom was specifically modeled using 21 different material inserts with densities ranging from 0.001 to 1.92 g cm-3. These simulations were run using the MGH double scattered proton beam, scanned pencil proton beams from 200 to 490 MeV, as well as pure 50 keV, 100 keV, 1 MeV and 2 MeV gamma x-ray beams. In order to compare the physics implied in both proton and photon radiography without being biased by the current state of the art in detector technology, the detectors were considered perfect. Along with spatial resolution, the contrast-to-noise ratio was evaluated and compared for each material. These analyses were performed using radiographic images that took into account the following: only primary protons, both primary and secondary protons, and both contributions while performing angular and energetic cuts. Additionally, tissue-to-tissue contrasts in an actual lung cancer patient case were studied for simulated proton radiographs and compared against the original kV x-ray image which corresponds to the current patient set-up image in the proton clinic. This study highlights the poorer spatial resolution of protons versus x-rays for radiographic imaging purposes, and the excellent density resolution of proton radiography. Contrasts around the tumor are higher using protons in a lung cancer patient case. The high-density resolution of proton radiography is of great importance for specific tumor diagnostics, such as in lung cancer, where x-ray radiography operates poorly. Furthermore, the use of daily proton radiography prior to proton therapy would ameliorate patient set-up while reducing the absorbed dose delivered through imaging.

  5. A method to optimize the processing algorithm of a computed radiography system for chest radiography.

    PubMed

    Moore, C S; Liney, G P; Beavis, A W; Saunderson, J R

    2007-09-01

    A test methodology using an anthropomorphic-equivalent chest phantom is described for the optimization of the Agfa computed radiography "MUSICA" processing algorithm for chest radiography. The contrast-to-noise ratio (CNR) in the lung, heart and diaphragm regions of the phantom, and the "system modulation transfer function" (sMTF) in the lung region, were measured using test tools embedded in the phantom. Using these parameters the MUSICA processing algorithm was optimized with respect to low-contrast detectability and spatial resolution. Two optimum "MUSICA parameter sets" were derived respectively for maximizing the CNR and sMTF in each region of the phantom. Further work is required to find the relative importance of low-contrast detectability and spatial resolution in chest images, from which the definitive optimum MUSICA parameter set can then be derived. Prior to this further work, a compromised optimum MUSICA parameter set was applied to a range of clinical images. A group of experienced image evaluators scored these images alongside images produced from the same radiographs using the MUSICA parameter set in clinical use at the time. The compromised optimum MUSICA parameter set was shown to produce measurably better images.

  6. Accreditation in Dental Hygiene.

    ERIC Educational Resources Information Center

    National Commission on Accrediting, Washington, DC.

    The Council on Dental Education cooperates with the American Dental Hygienists' Association in developing educational requirements for schools of dental hygiene. To be eligible for accreditation, schools must operate on a non-profit basis. A school applying for accreditation completes a previsitation questionnaire concerning its program. The…

  7. Dental Manpower Fact Book.

    ERIC Educational Resources Information Center

    Ake, James N.; Johnson, Donald W.

    Statistical data on many aspects of dental and allied dental personnel supply, distribution, characteristics, and education and on certain other aspects of dental services are presented and discussed. The data on dentist supply show the national trend in the supply of active dentists since 1950 and the concurrent changes in dentist-to-population…

  8. Dental Laboratory Technology.

    ERIC Educational Resources Information Center

    Department of the Air Force, Washington, DC.

    The Air Force dental laboratory technology manual is designed as a basic training text as well as a reference source for dental laboratory technicians, a specialty occupation concerned with the design, fabrication, and repair of dental prostheses. Numerous instructive diagrams and photographs are included throughout the manual. The comprehensive…

  9. DENTAL SCHOOL PLANNING.

    ERIC Educational Resources Information Center

    GALAGAN, DONALD J.

    THIS DISCUSSION PRESENTS A COMPLETE PICTURE OF THE CURRENT STATE OF DENTAL EDUCATION WITH SUGGESTIONS FOR MEETING THE DEMANDS FOR DENTAL STAFF AND FACILITIES. THE AREAS INVESTIGATED ARE (1) OBJECTIVES IN DENTAL EDUCATION--COURSES, TEACHING MODES, INNOVATIONS IN CURRICULUM, COORDINATION OF BASIC AND CLINICAL INSTRUCTION, (2) FACILITY…

  10. Dental Assisting Laboratory Manual.

    ERIC Educational Resources Information Center

    Thiel, Sandra J.

    Compiled to introduce the dental assisting student to various techniques used in the dental office and to present theoretical information essential for the student's professional development, this laboratory guide consists of three units of instruction. The first unit is an introduction to dental assisting and contains five topics of study. The…

  11. Perspectives from Dental Research.

    ERIC Educational Resources Information Center

    Baum, Bruce J.

    1996-01-01

    This paper responds to the Institute of Medicine's 1995 report concerning the present status and future needs of dental education in the United States. It examines whether real reform is occurring at the National Institute of Dental Research, within the academic dental community, and within the practicing profession. It concludes that very little…

  12. Xeroradiography for intraoral dental radiology. A process description.

    PubMed

    Jeromin, L S; Geddes, G F; White, S C; Gratt, B M

    1980-02-01

    A novel x-ray imaging system for intraoral dental radiography is described. The imaging process is based on xeroradiographic principles. The surface of a small selenium photoreceptor is electrically charged. After insertion into a light-tight cassette, the photoreceptor is placed intraorally and x-ray exposed like film. The resultant electrostatic charge image is developed in a processor using liquid toner. The toner image is then transferred from the photoreceptor and fixed to a white plastic substrate for viewing. After cleaning, the photoreceptor is available for reuse. In contrast to film images, xeroradiographic images are exposed and processed sequentially. Processing time is approximately 20 seconds. Two image characteristics--edge enhancement and deletion--are primarily responsible for many advantageous qualities of xeroradiographic images over film images. An experimental processor was tested successfully at two dental schools.

  13. A computerized scheme for lung nodule detection in multiprojection chest radiography

    SciTech Connect

    Guo Wei; Li Qiang; Boyce, Sarah J.; McAdams, H. Page; Shiraishi, Junji; Doi, Kunio; Samei, Ehsan

    2012-04-15

    Purpose: Our previous study indicated that multiprojection chest radiography could significantly improve radiologists' performance for lung nodule detection in clinical practice. In this study, the authors further verify that multiprojection chest radiography can greatly improve the performance of a computer-aided diagnostic (CAD) scheme. Methods: Our database consisted of 59 subjects, including 43 subjects with 45 nodules and 16 subjects without nodules. The 45 nodules included 7 real and 38 simulated ones. The authors developed a conventional CAD scheme and a new fusion CAD scheme to detect lung nodules. The conventional CAD scheme consisted of four steps for (1) identification of initial nodule candidates inside lungs, (2) nodule candidate segmentation based on dynamic programming, (3) extraction of 33 features from nodule candidates, and (4) false positive reduction using a piecewise linear classifier. The conventional CAD scheme processed each of the three projection images of a subject independently and discarded the correlation information between the three images. The fusion CAD scheme included the four steps in the conventional CAD scheme and two additional steps for (5) registration of all candidates in the three images of a subject, and (6) integration of correlation information between the registered candidates in the three images. The integration step retained all candidates detected at least twice in the three images of a subject and removed those detected only once in the three images as false positives. A leave-one-subject-out testing method was used for evaluation of the performance levels of the two CAD schemes. Results: At the sensitivities of 70%, 65%, and 60%, our conventional CAD scheme reported 14.7, 11.3, and 8.6 false positives per image, respectively, whereas our fusion CAD scheme reported 3.9, 1.9, and 1.2 false positives per image, and 5.5, 2.8, and 1.7 false positives per patient, respectively. The low performance of the conventional

  14. Comparison of radiography and ultrasonography in the detection of lung and liver cysts in cattle and buffaloes

    PubMed Central

    Kumar, Ashwani; Saini, Narinder Singh; Mohindroo, Jitender; Singh, Balbir Bagicha; Sangwan, Vandana; Sood, Naresh Kumar

    2016-01-01

    Aim: Echinococcosis is the major cause of lung and liver cysts in ruminants. This study compared usefulness of radiography and ultrasonography (USG) in the detection of lung and/or liver cysts in sick bovine animals. The study also worked out cooccurrence of lung and liver cysts, and whether these cysts were primary cause of sickness or not. Materials and Methods: This study was conducted on 45 sick bovine (37 buffaloes and 8 cattle) suffering from lung and liver cysts. A complete history of illness and clinical examination was carried out. Lateral radiographs of chest and reticular region were taken. In radiographically positive or suspected cases of cysts, USG of the lung and liver region was done. Depending on the location of cyst and clinical manifestations of the animal, the cysts were categorized as primary or secondary causes of sickness. Results: Using either imaging technique, it was observed that 46.7% of the animals had both lung and liver cysts, whereas 33.3% had only lung and 20% had only liver cyst. Cysts were identified as primary cause of sickness in 31.1% animals only. For diagnosing lung cysts, radiography (71.1%) and USG (62.2%) had similar diagnostic utility. However, for detecting liver cysts, USG was the only imaging tool. Conclusion: The lung and liver cysts, depending on their number and size may be a primary cause of sickness in bovine. Radiography and USG are recommended, in combination, as screening tools to rule out echinococcosis. PMID:27847421

  15. Weaker Dental Enamel Explains Dental Decay

    PubMed Central

    Vieira, Alexandre R.; Gibson, Carolyn W.; Deeley, Kathleen; Xue, Hui; Li, Yong

    2015-01-01

    Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is “weaker” while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution. PMID:25885796

  16. Integrated diagnostics

    NASA Technical Reports Server (NTRS)

    Hunthausen, Roger J.

    1988-01-01

    Recently completed projects in which advanced diagnostic concepts were explored and/or demonstrated are summarized. The projects begin with the design of integrated diagnostics for the Army's new gas turbine engines, and advance to the application of integrated diagnostics to other aircraft subsystems. Finally, a recent project is discussed which ties together subsystem fault monitoring and diagnostics with a more complete picture of flight domain knowledge.

  17. Recent advances in fast neutron radiography for cargo inspection

    NASA Astrophysics Data System (ADS)

    Sowerby, B. D.; Tickner, J. R.

    2007-09-01

    Fast neutron radiography techniques are attractive for screening cargo for contraband such as narcotics and explosives. Neutrons have the required penetration, they interact with matter in a manner complementary to X-rays and they can be used to determine elemental composition. Compared to neutron interrogation techniques that measure secondary radiation (neutron or gamma-rays), neutron radiography systems are much more efficient and rapid and they are much more amenable to imaging. However, for neutron techniques to be successfully applied to cargo screening, they must demonstrate significant advantages over well-established X-ray techniques. This paper reviews recent developments and applications of fast neutron radiography for cargo inspection. These developments include a fast neutron and gamma-ray radiography system that utilizes a 14 MeV neutron generator as well as fast neutron resonance radiography systems that use variable energy quasi-monoenergetic neutrons and pulsed broad energy neutron beams. These systems will be discussed and compared with particular emphasis on user requirements, sources, detector systems, imaging ability and performance.

  18. Evaluation of a Noise Reduction Procedure for Chest Radiography

    PubMed Central

    Fukui, Ryohei; Ishii, Rie; Kodani, Kazuhiko; Kanasaki, Yoshiko; Suyama, Hisashi; Watanabe, Masanari; Nakamoto, Masaki; Fukuoka, Yasushi

    2013-01-01

    Background The aim of this study was to evaluate the usefulness of noise reduction procedure (NRP), a function in the new image processing for chest radiography. Methods A CXDI-50G Portable Digital Radiography System (Canon) was used for X-ray detection. Image noise was analyzed with a noise power spectrum (NPS) and a burger phantom was used for evaluation of density resolution. The usefulness of NRP was evaluated by chest phantom images and clinical chest radiography. We employed the Bureau of Radiological Health Method for scoring chest images while carrying out our observations. Results NPS through the use of NRP was improved compared with conventional image processing (CIP). The results in image quality showed high-density resolution through the use of NRP, so that chest radiography examination can be performed with a low dose of radiation. Scores were significantly higher than for CIP. Conclusion In this study, use of NRP led to a high evaluation in these so we are able to confirm the usefulness of NRP for clinical chest radiography. PMID:24574577

  19. High-energy synchrotron X-ray radiography of shock-compressed materials

    NASA Astrophysics Data System (ADS)

    Rutherford, Michael E.; Chapman, David J.; Collinson, Mark A.; Jones, David R.; Music, Jasmina; Stafford, Samuel J. P.; Tear, Gareth R.; White, Thomas G.; Winters, John B. R.; Drakopoulos, Michael; Eakins, Daniel E.

    2015-06-01

    This presentation will discuss the development and application of a high-energy (50 to 250 keV) synchrotron X-ray imaging method to study shock-compressed, high-Z samples at Beamline I12 at the Diamond Light Source synchrotron (Rutherford-Appleton Laboratory, UK). Shock waves are driven into materials using a portable, single-stage gas gun designed by the Institute of Shock Physics. Following plate impact, material deformation is probed in-situ by white-beam X-ray radiography and complimentary velocimetry diagnostics. The high energies, large beam size (13 x 13 mm), and appreciable sample volumes (~ 1 cm3) viable for study at Beamline I12 compliment existing in-house pulsed X-ray capabilities and studies at the Dynamic Compression Sector. The authors gratefully acknowledge the ongoing support of Imperial College London, EPSRC, STFC and the Diamond Light Source, and AWE Plc.

  20. Development of a fast proton range radiography system for quality assurance in hadrontherapy

    NASA Astrophysics Data System (ADS)

    Bucciantonio, M.; Amaldi, U.; Kieffer, R.; Sauli, F.; Watts, D.

    2013-12-01

    We describe the development of a Proton Range Radiography system with an imaging area of 30×30 cm2 for two dimensional mapping of the integrated density in a target. Proton transmission radiographic images are produced by measuring, with a pair of position-sensitive detectors (GEM chambers), the direction of the protons transmitted through the patient and, with a stack of scintillators, the residual range of the protons leaving the patient. To match the data rate requirements of an in-beam diagnostic, a novel data acquisition system for the tracking detectors has been designed to operate at 1 MHz data flow. Laboratory tests exposing the GEM detector with high flux X-rays confirm the fast response of the new data acquisition system. Images of several phantoms have been recorded to demonstrate the GEM position accuracy.

  1. 42 CFR Appendix C to Part 75 - Standards for Accreditation of Dental Radiography Training for Dental Assistants

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... areas: radiation physics; radiation biology; radiation health, safety, and protection; X-ray films and...-radiation; and X-radiation units, detection and monitoring devices. —Radiation Biology. Curriculum...

  2. 42 CFR Appendix C to Part 75 - Standards for Accreditation of Dental Radiography Training for Dental Assistants

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... areas: radiation physics; radiation biology; radiation health, safety, and protection; X-ray films and...-radiation; and X-radiation units, detection and monitoring devices. —Radiation Biology. Curriculum...

  3. 42 CFR Appendix B to Part 75 - Standards for Accreditation of Dental Radiography Training for Dental Hygienists

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... must include content in seven areas: radiation physics; radiation biology; radiation health, safety... devices. —Radiation Biology. Curriculum content should include: Interaction of ionizing radiation...

  4. 42 CFR Appendix B to Part 75 - Standards for Accreditation of Dental Radiography Training for Dental Hygienists

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... must include content in seven areas: radiation physics; radiation biology; radiation health, safety... devices. —Radiation Biology. Curriculum content should include: Interaction of ionizing radiation...

  5. 42 CFR Appendix C to Part 75 - Standards for Accreditation of Dental Radiography Training for Dental Assistants

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... areas: radiation physics; radiation biology; radiation health, safety, and protection; X-ray films and...-radiation; and X-radiation units, detection and monitoring devices. —Radiation Biology. Curriculum...

  6. 42 CFR Appendix B to Part 75 - Standards for Accreditation of Dental Radiography Training for Dental Hygienists

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... must include content in seven areas: radiation physics; radiation biology; radiation health, safety... devices. —Radiation Biology. Curriculum content should include: Interaction of ionizing radiation...

  7. 42 CFR Appendix B to Part 75 - Standards for Accreditation of Dental Radiography Training for Dental Hygienists

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... must include content in seven areas: radiation physics; radiation biology; radiation health, safety... devices. —Radiation Biology. Curriculum content should include: Interaction of ionizing radiation...

  8. 42 CFR Appendix C to Part 75 - Standards for Accreditation of Dental Radiography Training for Dental Assistants

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... areas: radiation physics; radiation biology; radiation health, safety, and protection; X-ray films and...-radiation; and X-radiation units, detection and monitoring devices. —Radiation Biology. Curriculum...

  9. 42 CFR Appendix C to Part 75 - Standards for Accreditation of Dental Radiography Training for Dental Assistants

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... areas: radiation physics; radiation biology; radiation health, safety, and protection; X-ray films and...-radiation; and X-radiation units, detection and monitoring devices. —Radiation Biology. Curriculum...

  10. 42 CFR Appendix B to Part 75 - Standards for Accreditation of Dental Radiography Training for Dental Hygienists

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... must include content in seven areas: radiation physics; radiation biology; radiation health, safety... devices. —Radiation Biology. Curriculum content should include: Interaction of ionizing radiation...

  11. Antibiotic resistance in general dental practice--a cause for concern?

    PubMed

    Sweeney, Louise C; Dave, Jayshree; Chambers, Philip A; Heritage, John

    2004-04-01

    This review examines the contribution dental prescribing makes to the selection of antibiotic resistance in bacteria of the oral flora. The antibiotics commonly used in dental prescribing in the UK are discussed, together with the problems of resistance in members of the oral flora. The antibiotic prescribing habits of general dental practitioners are then reviewed with respect to therapeutic prescriptions and those drugs that are prescribed prophylactically. Not all antibiotic prescriptions for dental problems are written by dentists; prescribing outside the dental profession is also considered. The review then considers the support available to dentists from clinical diagnostic microbiology laboratories. It concludes that better use of diagnostic services, surveillance and improvements in dental education are required now to lessen the impact of antibiotic resistance in the future.

  12. NEUTRON RADIOGRAPHY (NRAD) REACTOR 64-ELEMENT CORE UPGRADE

    SciTech Connect

    John D. Bess

    2014-03-01

    The neutron radiography (NRAD) reactor is a 250 kW TRIGA (registered) (Training, Research, Isotopes, General Atomics) Mark II , tank-type research reactor currently located in the basement, below the main hot cell, of the Hot Fuel Examination Facility (HFEF) at the Idaho National Laboratory (INL). It is equipped with two beam tubes with separate radiography stations for the performance of neutron radiography irradiation on small test components. The interim critical configuration developed during the core upgrade, which contains only 62 fuel elements, has been evaluated as an acceptable benchmark experiment. The final 64-fuel-element operational core configuration of the NRAD LEU TRIGA reactor has also been evaluated as an acceptable benchmark experiment. Calculated eigenvalues differ significantly (approximately +/-1%) from the benchmark eigenvalue and have demonstrated sensitivity to the thermal scattering treatment of hydrogen in the U-Er-Zr-H fuel.

  13. Limiting the use of routine radiography for acute ankle injuries.

    PubMed Central

    Cockshott, W. P.; Jenkin, J. K.; Pui, M.

    1983-01-01

    In the diagnosis of ankle injuries routine radiography is often productive. An international survey of the average number of radiographs made of injured ankles suggested that two projections are adequate to detect fractures. This was confirmed in a prospective study of 242 patients coming to a hospital emergency department with recent ankle injuries. All the fractures could be identified on an anteroposterior or a lateral projection, although some were more obvious on an oblique view. As well, all the fractures were associated with malleolar soft-tissue swelling. Thus, radiography for acute ankle injuries could safely be restricted to patients with soft-tissue swelling, and fractures could be diagnosed using only two routine projections, though for management purposes additional projections might be needed. With a policy of limiting the use of radiography substantial cost reductions are possible. Images FIG. 1 PMID:6407744

  14. Studies of solid propellant combustion with pulsed radiography

    NASA Technical Reports Server (NTRS)

    Godai, T.; Tanemura, T.; Fujiwara, T.; Shimizu, M.

    1987-01-01

    Pulsed radiography was applied to observe solid propellant surface regression during rocket motor operation. Using a 150 KV flash X-ray system manufactured by the Field Emission Corporation and two kinds of film suppliers, images of the propellant surface of a 5 cm diameter end burning rocket motor were recorded on film. The repetition frame rate of 8 pulses per second and the pulse train length of 10 pulses are limited by the capability of the power supply and the heat build up within the X-ray tube, respectively. The experiment demonstrated the effectiveness of pulsed radiography for observing solid propellant surface regression. Measuring the position of burning surface images on film with a microdensitometer, quasi-instantaneous burning rate as a function of pressure and the variation of characteristic velocity with pressure and gas stay time were obtained. Other research items to which pulsed radiography can be applied are also suggested.

  15. [Significance of plain radiography in shoulder pain diagnosis].

    PubMed

    Botser, Itamar Busheri; Shapira, Shachar; Oran, Ariel; Avivi, Eran; Pritsch, Moshe

    2011-09-01

    Shoulder pain is a common complaint--almost 20% of the population will suffer shoulder pain during their life time. Despite the availability of newer imaging techniques for evaluation of the shoulder, the first imaging study should be radiography. Recently, ultrasonography of the shoulder has become one of the first studies performed. Sometimes, ultrasonography is conducted before radiography; moreover, many patients are being referred to a shoulder specialist without performing an X-ray. There is a plethora of pathologies that can cause shoulder pain--rotator cuff tears, impingement syndrome, calcified tendinitis, osteoarthritis, rheumatoid arthritis, neoplasms and more. This review aims to show the significance of plain radiography in the diagnosis of shoulder pathologies, in order to encourage the use of this modality. In this paper we shall review the different causes of shoulder pain and their radiographic characteristics.

  16. Pressure Indication of 3013 Inner Containers Using Digital Radiography

    SciTech Connect

    HENSEL, SJ

    2004-04-15

    Plutonium bearing materials packaged for long term storage per the Department of Energy Standard 3013 (DOE-STD-3013) are required to be examined periodically in a non-destructive manner (i.e. without compromising the storage containers) for pressure buildup. Radiography is the preferred technology for performing the examinations. The concept is to measure and record the container lid position. As a can pressurizes the lid will deflect outward and thus provide an indication of the internal pressure. A radiograph generated within 30 days of creation of each storage container serves as the baseline from which future surveillance examinations will be compared. A problem with measuring the lid position was discovered during testing of a digital radiography system. The solution was to provide a distinct feature upon the lower surface of the container lid from which the digital radiography system could easily track the lid position.

  17. The use of low-level laser therapy for controlling the gag reflex in children during intraoral radiography.

    PubMed

    Elbay, Mesut; Tak, Önjen; Şermet Elbay, Ülkü; Kaya, Can; Eryılmaz, Kubilay

    2016-02-01

    The current literature suggests that low-level laser stimulation of the PC 6 acupuncture points may prevent gagging. This study aimed to determine if low-level laser therapy (LLLT) can reduce the gag reflex in children undergoing intraoral maxillary radiography. This randomized, controlled, double-blind clinical trial was conducted with 25 children with moderate-to-very severe gag reflexes who required bilateral periapical radiographic examination of the maxillary molar region. Children's anxiety levels were initially evaluated using Corah's Dental Anxiety Scale (DAS) to identify any possible relationship between gagging and anxiety. A control radiograph was taken of one randomly selected side in each patient after simulated laser application so that the patient was blinded to the experimental conditions (control group). Laser stimulation was then performed for the experimental side. A laser probe was placed on the Pericardium 6 (PC 6) acupuncture point on each wrist, and laser energy was delivered for 14 s (300 mW, energy density 4 J/cm(2)) at a distance of 1 cm from the target tissue. Following laser stimulation, the experimental radiograph was taken (experimental group). Gagging responses were measured using the Gagging Severity Criteria for each group. Data were analyzed using Spearman's rho correlations and Mann-Whitney U tests. Both mean and median gagging scores were higher in the control group than in the experimental group. Patients who were unable to tolerate the intraoral control radiography were able to tolerate the procedure after LLLT. Differences between gagging scores of the control and experimental groups were statistically significant (P = .000). There was no significant correlation between gagging severity and anxiety score (P > .05). A negative correlation was found between age and gagging score in the control group (P ˂ .05). Within the limitations of this study, LLLT of the PC 6 acupuncture points appears to be a useful technique

  18. Pilot study of bovine interdigital cassetteless computed radiography.

    PubMed

    El-Shafaey, El-Sayed Ahmed Awad; Aoki, Takahiro; Ishii, Mitsuo; Yamada, Kazutaka

    2013-11-01

    Twenty-one limbs of bovine cadavers (42 digits) were exposed to interdigital cassetteless imaging plate using computed radiography. The radiographic findings included exostosis, a rough planta surface, osteolysis of the apex of the distal phalanx and widening of the laminar zone between the distal phalanx and the hoof wall. All these findings were confirmed by computed tomography. The hindlimbs (19 digits) showed more changes than the forelimbs (10 digits), particularly in the lateral distal phalanx. The cassetteless computed radiography technique is expected to be an easily applicable method for the distal phalanx rather than a conventional cassette-plate and/or the film-screen cassetteless methods.

  19. Californium Multiplier Part I: design for neutron radiography

    SciTech Connect

    Crosbie, K.L.; Preskitt, C.A.; John, J.; Hastings, J.D.

    1982-01-01

    The Californium Multiplier (CFX) is a subcritical assembly of enriched uranium surrounding a californium-252 neutron source. The function of the CFX is to multiply the neutrons emitted by the source to a number sufficient for neutron radiography. The CFX is designed to provide a collimated beam of thermal neutrons from which the gamma radiation is filtered, and the scattered neutrons are reduced to make it suitable for high resolution radiography. The entire system has inherent safety features, which provide for system and personnel safety, and it operates at moderate cost. In Part I, the CFX and the theory of its operation are described in detail.

  20. Proton radiography, nuclear cross sections and multiple Coulomb scattering

    SciTech Connect

    Sjue, Sky K.

    2015-11-04

    The principles behind proton radiography including multiple Coulomb scattering are discussed for a purely imaginary square well nucleus in the eikonal approximation. It is found that a very crude model can reproduce the angular dependence of the cross sections measured at 24 GeV/c. The largest differences are ~3% for the 4.56 mrad data, and ~4% for the 6.68 mrad data. The prospect of understanding how to model deterministically high-energy proton radiography over a very large range of energies is promising, but it should be tested more thoroughly.

  1. Quantitative studies on inner interfaces in conical metal joints using hard x-ray inline phase contrast radiography

    SciTech Connect

    Zabler, S.; Rack, T.; Nelson, K.; Rack, A.

    2010-10-15

    Quantitative investigation of micrometer and submicrometer gaps between joining metal surfaces is applied to conical plug-socket connections in dental titanium implants. Microgaps of widths well beyond the resolving power of industrial x-ray systems are imaged by synchrotron phase contrast radiography. Furthermore, by using an analytical model for the relatively simple sample geometry and applying it to numerical forward simulations of the optical Fresnel propagation, we show that quantitative measurements of the microgap width down to 0.1 {mu}m are possible. Image data recorded at the BAMline (BESSY-II light source, Germany) are presented, with the resolving power of the imaging system being 4 {mu}m in absorption mode and {approx}14 {mu}m in phase contrast mode (z{sub 2}=0.74 m). Thus, phase contrast radiography, combined with numerical forward simulations, is capable of measuring the widths of gaps that are two orders of magnitude thinner than the conventional detection limit.

  2. Measuring microfocal spots using digital radiography

    SciTech Connect

    Fry, David A; Ewert, Uwe

    2009-01-01

    Measurement of microfocus spot size can be important for several reasons: (1) Quality assurance during manufacture of microfocus tubes; (2) Tracking performance and stability of microfocus tubes; (3) Determining magnification is especially important for digital radiography where the native spatial resolution of the digital system is not adequate for the application; and (4) Knowledge of unsharpness from the focal spot alone. The European Standard EN 12543-5 is based on a simple geometrical method of calculating focal spot size from unsharpness of high magnification film radiographs. The following equations are used for the focal spot size measurement: By similar triangles the following equations are presupposed: f/a = U/b and M = (a+b)/a. These equations can be combined to yield the well known expression: U = f(M - 1). Solving for f, f = U/(M-1). Therefore, the focal spot size, f, can be calculated by measuring the radiographic unsharpness and magnification of a known object. This is the basis for these tests. The European standard actually uses one-half of the unsharpness (which are then added together) from both sides of the object to avoid additional unsharpness contributions due to edge transmission unsharpness of the round test object (the outside of the object is measured). So the equation becomes f = (1/2 U{sub 1} + 1/2 U{sub 2})/(M-1). In practice 1/2 U is measured from the 50% to the 90% signal points on the transition profile from ''black'' to ''white,'' (positive image) or attenuated to unattenuated portion of the image. The 50% to 90% points are chosen as a best fit to an assumed Gaussian radiation distribution from the focal spot and to avoid edge transmission effects. 1/2 U{sub 1} + 1/2 U{sub 2} corresponds about to the full width at half height of a Gaussian focal spot. A highly absorbing material (Tungsten, Tungsten Alloy, or Platinum) is used for the object. Either wires or a sphere are used as the object to eliminate alignment issues. One

  3. [Aplication of demineralized human bone matrix in the surgical dental fusion treatment. Report of a case].

    PubMed

    Mora-Rincones, Oscar A; Corona-Rodríguez, Julio C; Díaz-Carvajal, Alvaro L; Franco-Carrero, Isabel C

    2008-06-01

    The purpose of this work is to present a surgical alternative in the treatment of the dental fusions through the placement of demineralized human bone matrix (DHBM) (Grafton Putty)*, immediately after the separation and extraction of the fused tooth to the permanent one. The dental fusion is a dental anomaly of union, that consists in the union of two dental germs during development. It could happen at any of the dental germ evolution stages from the dental sheet or from more advanced processes of differentiation. For the clinical treatment, an allograft of DHBM with osteoinductive and osteoconductive properties was used. This had several factors of bone growth, it allowed the gradual growth of a new bone that helped to correct the bone defects post-extraction and to cover the exposed distal wall of the remaining permanent tooth. The clinic evaluation and the periapical and panoramic radiographies images were used for the clinical control. It can be concluded that the surgical separation and the extraction of the tooth with less anatomical likeness to the contralateral and the placement of the DHBM, represent a surgical treatment alternative of the dental fusion.

  4. 42 CFR 37.51 - Interpreting and classifying chest radiographs-digital radiography systems.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...-digital radiography systems. 37.51 Section 37.51 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH... of Chest Radiographs § 37.51 Interpreting and classifying chest radiographs—digital radiography systems. (a) For each chest radiograph obtained at an approved facility using a digital radiography...

  5. What is dental ecology?

    PubMed

    Cuozzo, Frank P; Sauther, Michelle L

    2012-06-01

    Teeth have long been used as indicators of primate ecology. Early work focused on the links between dental morphology, diet, and behavior, with more recent years emphasizing dental wear, microstructure, development, and biogeochemistry, to understand primate ecology. Our study of Lemur catta at the Beza Mahafaly Special Reserve, Madagascar, has revealed an unusual pattern of severe tooth wear and frequent tooth loss, primarily the result of consuming a fallback food for which these primates are not dentally adapted. Interpreting these data was only possible by combining our areas of expertise (dental anatomy [FC] and primate ecology [MS]). By integrating theoretical, methodological, and applied aspects of both areas of research, we adopted the term "dental ecology"-defined as the broad study of how teeth respond to the environment. Specifically, we view dental ecology as an interpretive framework using teeth as a vehicle for understanding an organism's ecology, which builds upon earlier work, but creates a new synthesis of anatomy and ecology that is only possible with detailed knowledge of living primates. This framework includes (1) identifying patterns of dental pathology and tooth use-wear, within the context of feeding ecology, behavior, habitat variation, and anthropogenic change, (2) assessing ways in which dental development and biogeochemical signals can reflect habitat, environmental change and/or stress, and (3) how dental microstructure and macro-morphology are adapted to, and reflect feeding ecology. Here we define dental ecology, provide a short summary of the development of this perspective, and place our new work into this context.

  6. Dental hygiene in Slovakia.

    PubMed

    Luciak-Donsberger, C; Krizanová, M

    2004-08-01

    This article reports on the development of the dental hygiene profession in Slovakia from a global perspective. The aim is to inform about current developments and to examine, how access to qualified dental hygiene care might be improved and how professional challenges might be met. For an international study on dental hygiene, secondary source data were obtained from members of the House of Delegates of the International Federation of Dental Hygienists (IFDH) or by fax and e-mail from experts involved in the national professional and educational organization of dental hygiene in non-IFDH member countries, such as Slovakia. Responses were followed-up by interviews, e-mail correspondence, visits to international universities, and a review of supporting studies and reference literature. Results show that the introduction of dental hygiene in Slovakia in 1992 was inspired by the delivery of preventive care in Switzerland. Initiating local dentists and dental hygienists strive to attain a high educational level, equitable to that of countries in which dental hygiene has an established tradition of high quality care. Low access to qualified dental hygiene care may be a result of insufficient funding for preventive services, social and cultural lack of awareness of the benefits of preventive care, and of limitations inherent in the legal constraints preventing unsupervised dental hygiene practice. These may be a result of gender politics affecting a female-dominated profession and of a perception that dental hygiene is auxiliary to dental care. International comparison show that of all Eastern European countries, the dental hygiene profession appears most advanced in Slovakia. This is expressed in high evidence-based academic goals, in extensive work with international consultants from the Netherlands and Switzerland, in annual congresses of high professional quality, and in the establishment of a profession, which has not been introduced in all Western EU countries.

  7. Employment of Dental Hygienists as Dental Educators.

    ERIC Educational Resources Information Center

    Fong, Cynthia; Odrich, Johanna

    1987-01-01

    A study of the use of dental hygienists to teach periodontics, preventive dentistry, community dentistry, and public health courses looked at employment patterns and practices and the qualifications of the teachers. (MSE)

  8. The Role of Online Learning in Radiographic Diagnosis in Dental Education

    ERIC Educational Resources Information Center

    Tsao, Ariel; Park, Sang E.

    2016-01-01

    The purpose of the pilot study was to investigate whether an interactive online module improved third-year dental students' radiographic caries diagnosis abilities and conceptual understanding. Third year dental students were given online tutoring modules and assessed afterward to determine whether their diagnostic skills improved, whether they…

  9. On dental wear, dental work, and oral health in the type specimen (LB1) of Homo floresiensis.

    PubMed

    Jungers, William L; Kaifu, Yousuke

    2011-06-01

    The claim that the lower left first mandibular molar of LB1, the type specimen of Homo floresiensis, displays endodontic work, and a filling is assessed by digital radiography and micro-CT scanning. The M(1) tooth crown is heavily worn and exhibits extensive dentine exposure that is stained white, but there is no trace of endodontic treatment or a dental filling in this Indonesian fossil dated to 17.1-19.0 kya. Dental calculus (commonly observed in foragers) is present on the teeth of LB1, but there are no observable caries. The pattern of dental attrition in the mandibles of both LB1/2 and LB6/1 (moderate to extensive flat wear across the entire arch) is consistent with that seen in Plio-Pleistocene Homo fossils and in modern hunter-gatherers, and is not typical of most agriculturalists. We conclude that the dental-work and farming hypotheses are falsified and therefore irrelevant to the debate over the taxonomy and phylogeny of H. floresiensis.

  10. A back projection dosimetry method for diagnostic and orthovoltage x-ray from 40 to 140 kVp for patients and phantoms

    NASA Astrophysics Data System (ADS)

    Afrashteh, Hossein

    2005-07-01

    Patient dosimetry in practice is involved with time consuming, tedious calculations during the measurement process. There is a need for a straight forward and accurate method to perform patient dosimetry when required. A back projection dosimetry method for patient/phantom using Entrance Surface Dose (ESD) and its corresponding Exit Surface Dose with an average value for attenuation coefficient (mu), (e.g., mean effective attenuation coefficient (mu`)), was developed. The method focused on low energy X-ray units (40--140 kVp), primarily for conventional diagnostic radiography and low energy radiation therapy procedures. The assumption is that it may be used for similar concepts and modalities within the same energy range, (e.g., fluoroscopy, where the skin injuries have been common in the past, or mammography, where the radiation carcinogenesis has been a matter of concern). A new Gafchromic film, XR-QA, as a precision dosimeter was assessed and used with this algorithm. Due to the fact that the dose range often seen in conventional radiography exams in most cases is not high enough to activate the sensitive layer of this film sufficiently, the measured net Optical Density (OD) changes were not substantial enough. Therefore, a conventional and relatively low speed dental film, DF58 Ultra, was used. Various thicknesses of Acrylic, a tissue equivalent material, were used with the algorithm. When compared with the other sources and reference data, the results from the developed mathematical algorithm are in a reasonable agreement with these values. The developed method is straight forward, and within the acceptable accuracy range. The back projection dosimetry method is effective and may be used individually for the desired body parts or fetus areas, depending on the clinical practice and interests.

  11. The optimum circular field size for dental radiography with intraoral films

    SciTech Connect

    van Straaten, F.J.; van Aken, J.

    1982-09-01

    Intraoral radiographs are often made with circular fields to irradiate the film, and in many instances these fields are much larger than the film. The feasibility of reducing a circular radiation field without increasing the probability of excessive cone cutting was evaluated clinically, and an optimum field size was determined. A circular radiation field 4.5 cm. at the tube end was found to minimize cone cutting and reduce the area of tissue irradiated by at least 44 percent. Findings suggest that current I.C.R.P. recommendations for a 6 to 7.5 cm. diameter circular field may be too liberal.

  12. Diagnostic imaging of the acutely injured patient

    SciTech Connect

    Berquist, T.H.

    1985-01-01

    This book provides an analysis of pathophysiologic concepts of trauma and reviews the effectiveness of the available imaging modalities in acute trauma of various organ system. Topics covered are chest injuries; abdominal trauma; fractures of long bones; the foot and ankle; the knee; hand and wrist; the elbow; the shoulder; the pelvis hips; the spine; the skull and facial trauma and the clinical assessment of multiple injuries patients. Comparative evaluation of diagnostic techniques of radiography is discussed. Normal anatomy and bone fractures along with soft-tissue injuries are described.

  13. Pathways in dental public health.

    PubMed

    Silverstein, Steven J

    2005-07-01

    Dental public health is one of the nine specialties of dentistry recognized by the American Dental Association Commission on Dental Accreditation. Dental public health has been defined as the "science and art of preventing and controlling dental diseases and promoting dental health through organized community efforts. It is that form of dental practice which serves the community as a patient rather than as an individual. It is concerned with the dental health education of the public, with applied dental research, and with the administration of group dental care programs as well as the prevention and control of dental diseases on a community basis." This article will describe the many career and educational pathways dentists may follow to become irvolved in the practice of dental public health.

  14. International dental standards.

    PubMed

    Jones, Derek W

    2007-09-22

    International dental standards are vital in maintaining the safety and quality of both the products and materials used by dental professionals and the many oral health products used by members of the general public, yet many dentists will be unaware of the role standards play in their daily practice. In this article, Derek W. Jones outlines the vital work of the International Standards Organization and highlights how standards pervade nearly every dental procedure.

  15. Guidelines for use of lumbar spine radiography

    SciTech Connect

    Kelen, G.D.; Noji, E.K.; Doris, P.E.

    1986-03-01

    In deciding whether to obtain lumbosacral spine films, the emergency physician must not ask whether a diagnosis can be established, but whether obtaining films will affect management. Low back pain is a considerable problem for society with cost in billions of dollars. Gonadal radiation from lumbosacral radiographs is significant, and thus ordering films should be minimized. Plain radiographs are rarely indicated in otherwise healthy patients 20 to 50 years old with mechanical or root pain on initial presentation. In other patients alternative diagnostic methodologies such as computed tomography may be superior, with less radiation risk. Specific recommendations for emergency radiographic evaluation of the lumbosacral spine are offered.68 references.

  16. Trichobezoars Detected and Treated Based on Plain Radiography.

    PubMed

    Barrows, Amy; Vachon, Tyler; Campin, Richard C; Ignacio, Romeo C

    2015-10-01

    Bezoars are conglomerations of indigestible material that become trapped in the gastrointestinal tract. We present a case of an 8-year-old female child diagnosed with a gastric bezoar solely on plain radiography and treated with abdominal surgical exploration and removal. In addition, traditional characteristic radiographic findings and treatment options for bezoars found in the current literature are reviewed.

  17. 10 CFR 34.13 - Specific license for industrial radiography.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 34.13 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY... may affirm that all individuals acting as industrial radiographers will be certified in radiation... submits a description of the applicant's overall organizational structure as it applies to the...

  18. 10 CFR 34.13 - Specific license for industrial radiography.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 34.13 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY... may affirm that all individuals acting as industrial radiographers will be certified in radiation... submits a description of the applicant's overall organizational structure as it applies to the...

  19. 10 CFR 34.13 - Specific license for industrial radiography.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 34.13 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY... may affirm that all individuals acting as industrial radiographers will be certified in radiation... submits a description of the applicant's overall organizational structure as it applies to the...

  20. Beam Physics in X-Ray Radiography Facilities

    SciTech Connect

    Chen, Y J; Caporaso, G J; Chambers, F W; Falabella, S; Goldin, F J; Guethlein, G; Lauer, E L; McCarrick, J F; Neurath, R; Richardson, R A; Sampayan, S; Weir, J T

    2002-12-02

    Performance of x-ray radiography facilities requires focusing the electron beams to sub-millimeter spots on the x-ray converters. Ions extracted from a converter by impact of a high intensity beam can partially neutralize the beam space charge and change the final focusing system. We will discuss these ion effects and mitigation.

  1. Method and Apparatus for Computed Imaging Backscatter Radiography

    NASA Technical Reports Server (NTRS)

    Shedlock, Daniel (Inventor); Meng, Christopher (Inventor); Sabri, Nissia (Inventor); Dugan, Edward T. (Inventor); Jacobs, Alan M. (Inventor)

    2013-01-01

    Systems and methods of x-ray backscatter radiography are provided. A single-sided, non-destructive imaging technique utilizing x-ray radiation to image subsurface features is disclosed, capable of scanning a region using a fan beam aperture and gathering data using rotational motion.

  2. Radiography Capabilities for Matter-Radiation Interactions in Extremes

    SciTech Connect

    Walstrom, Peter Lowell; Garnett, Robert William; Chapman, Catherine A. B; Salazar, Harry Richard; Otoole, Joseph Alfred; Barber, Ronald L.; Gomez, Tony Simon

    2015-04-28

    The Matter-Radiation Interactions in Extremes (MaRIE) experimental facility will be used to discover and design the advanced materials needed to meet 21st century national security and energy security challenges. This new facility will provide the new tools scientists need to develop next-generation materials that will perform predictably and on-demand for currently unattainable lifetimes in extreme environments. The MaRIE facility is based on upgrades to the existing LANSCE 800-MeV proton linac and a new 12-GeV electron linac and associated X-ray FEL to provide simultaneous multiple probe beams, and new experimental areas. In addition to the high-energy photon probe beam, both electron and proton radiography capabilities will be available at the MaRIE facility. Recently, detailed radiography system studies have been performed to develop conceptual layouts of high-magnification electron and proton radiography systems that can meet the experimental requirements for the expected first experiments to be performed at the facility. A description of the radiography systems, their performance requirements, and a proposed facility layout are presented.

  3. Common positioning errors in panoramic radiography: A review

    PubMed Central

    Rondon, Rafael Henrique Nunes; Pereira, Yamba Carla Lara

    2014-01-01

    Professionals performing radiographic examinations are responsible for maintaining optimal image quality for accurate diagnoses. These professionals must competently execute techniques such as film manipulation and processing to minimize patient exposure to radiation. Improper performance by the professional and/or patient may result in a radiographic image of unsatisfactory quality that can also lead to a misdiagnosis and the development of an inadequate treatment plan. Currently, the most commonly performed extraoral examination is panoramic radiography. The invention of panoramic radiography has resulted in improvements in image quality with decreased exposure to radiation and at a low cost. However, this technique requires careful, accurate positioning of the patient's teeth and surrounding maxillofacial bone structure within the focal trough. Therefore, we reviewed the literature for the most common types of positioning errors in panoramic radiography to suggest the correct techniques. We would also discuss how to determine if the most common positioning errors occurred in panoramic radiography, such as in the positioning of the patient's head, tongue, chin, or body. PMID:24701452

  4. Point Scattered Function (PScF) for fast neutron radiography

    NASA Astrophysics Data System (ADS)

    Hassan, Mohamed H.

    2009-08-01

    Fast neutron radiography opened up a new range of possibilities to image extremely dense objects. The removal of the scattering effect is one of the most challenging problems in neutron imaging. Neutron scattering in fast neutron radiography did not receive much attention compared with X-ray and thermal neutron radiography. The purpose of this work is to investigate the behavior of the Point Scattered Function (PScF) as applied in fast neutron radiography. The PScF was calculated using MCNP as a spatial distribution of scattered neutrons over the detector surface for one emitting source element. Armament and explosives materials, namely, Rifle steel, brass, aluminum and trinitrotoluene (TNT) were simulated. Effect of various sample thickness and sample-to-detector distance were considered. Simulated sample geometries included a slab with varying thickness, a sphere with varying radii, and a cylinder with varying base radii. Different neutron sources, namely, Cf-252, DT as well as DD neutron sources were considered. Neutron beams with zero degree divergence angle; and beams with varying angles related to the normal to the source plane were simulated. Curve fitting of the obtained PScF, in the form of Gaussian function, were given to be used in future work using image restoration codes. Analytical representation of the height as well as the Full Width at Half Maximum (FWHM) of the obtained Gaussian functions eliminates the need to calculate the PScF for sample parameters that were not investigated in this study.

  5. Dental erosion, summary.

    PubMed

    ten Cate, J M; Imfeld, T

    1996-04-01

    Although reports on dental erosion have always appeared in the dental literature, there is currently a growing interest among researchers and clinicians. Potential risk factors for dental erosion are changed lifestyle and eating patterns, with increased consumption of acidic foods and beverages. Various gastrointestinal and eating disorders expose the dentition to frequent contacts with very acidic gastric content, which may lead to erosion. Whether these factors indeed lead, on a population scale, to a higher prevalence and incidence of erosion is yet to be established. This article summarizes the different aspects of the prevalence, pathology, etiology, assessment, prevention and treatment of dental erosion, and concludes with recommendations for future research.

  6. Dental Implant Systems

    PubMed Central

    Oshida, Yoshiki; Tuna, Elif B.; Aktören, Oya; Gençay, Koray

    2010-01-01

    Among various dental materials and their successful applications, a dental implant is a good example of the integrated system of science and technology involved in multiple disciplines including surface chemistry and physics, biomechanics, from macro-scale to nano-scale manufacturing technologies and surface engineering. As many other dental materials and devices, there are crucial requirements taken upon on dental implants systems, since surface of dental implants is directly in contact with vital hard/soft tissue and is subjected to chemical as well as mechanical bio-environments. Such requirements should, at least, include biological compatibility, mechanical compatibility, and morphological compatibility to surrounding vital tissues. In this review, based on carefully selected about 500 published articles, these requirements plus MRI compatibility are firstly reviewed, followed by surface texturing methods in details. Normally dental implants are placed to lost tooth/teeth location(s) in adult patients whose skeleton and bony growth have already completed. However, there are some controversial issues for placing dental implants in growing patients. This point has been, in most of dental articles, overlooked. This review, therefore, throws a deliberate sight on this point. Concluding this review, we are proposing a novel implant system that integrates materials science and up-dated surface technology to improve dental implant systems exhibiting bio- and mechano-functionalities. PMID:20480036

  7. Diagnostic imaging for temporomandibular disorders and orofacial pain.

    PubMed

    Hunter, Allison; Kalathingal, Sajitha

    2013-07-01

    The focus of this article is diagnostic imaging used for the evaluation of temporomandibular disorders and orofacial pain patients. Imaging modalities discussed include conventional panoramic radiography, panoramic temporomandibular joint imaging mode, cone beam computed tomography, and magnetic resonance imaging. The imaging findings associated with common diseases of the temporomandibular joint are presented and indications for brain imaging are discussed. Advantages and disadvantages of each imaging modality are presented as well as illustrations of the various imaging techniques.

  8. Is dosimetry still a necessity in current dental practice?

    PubMed

    Reddy, S S; Rakesh, N; Chauhan, Pallavi; Clint, Joseph Ben; Sharma, Shivani

    2015-12-01

    Today, dentists have a wide range of imaging modalities to choose from, the film based techniques, digital techniques, and the recent introduction of 3D volumetric or cone beam computed tomography (CBCT). The inherent design features of the new generation dental x-ray equipment has significantly improved over the years with no evidence of substandard x-ray units in operation. In dental facilities radiological workload is comparatively low, newer radiation equipments and accessories follow safety guidelines and employ better radiation protection measures for the patient and the operator. Dentists' knowledge and expertise in radiation protection measures is good, enabling them to carry out riskfree radiation procedures in their practice. Therefore, the present study is aimed at assessing the need for dosimeters in current dental scenario. 'Is there currently a significant risk from dental radiography to merit the use of personal dosimetery in dental practice. 'Dental health professionals (Oral radiologists) and radiographic assistants of fourteen dental colleges in Karnataka state participated in this questionnaire study. The questionnaire consisted of the following questions--the make, type, year of manufacture of radiographic machines used in their setup, number of radiographs made per day in the institution, type of receptors used, number of personnel at risk for radiation exposure, radiation protection measures used, regular monitoring by personal dosimeters, equivalent dosage readings for the past 12 months and whether the reading of thermoluminescent dosimeters (TLD) for any personnel had exceeded the recommended exposure value in the last 3 years. Dosimetry records of the radiology staff in the last three years shows doses no more than 1.50 mSv per year. The various institutions' dose (person mSv) was in the range of 3.70 mSv-3.90 mSv. Personal monitoring for Dentists can be omitted in the dental colleges since the estimated dose of oral radiologists

  9. Education About Dental Hygienists' Roles in Public Dental Prevention Programs: Dental and Dental Hygiene Students' and Faculty Members' and Dental Hygienists' Perspectives.

    PubMed

    Pervez, Anushey; Kinney, Janet S; Gwozdek, Anne; Farrell, Christine M; Inglehart, Marita R

    2016-09-01

    In 2005, Public Act No. 161 (PA 161) was passed in Michigan, allowing dental hygienists to practice in approved public dental prevention programs to provide services for underserved populations while utilizing a collaborative agreement with a supervising dentist. The aims of this study were to assess how well dental and dental hygiene students and faculty members and practicing dental hygienists have been educated about PA 161, what attitudes and knowledge about the act they have, and how interested they are in additional education about it. University of Michigan dental and dental hygiene students and faculty members, students in other Michigan dental hygiene programs, and dental hygienists in the state were surveyed. Respondents (response rate) were 160 dental students (50%), 63 dental hygiene students (82%), 30 dental faculty members (26%), and 12 dental hygiene faculty members (52%) at the University of Michigan; 143 dental hygiene students in other programs (20%); and 95 members of the Michigan Dental Hygienists' Association (10%). The results showed that the dental students were less educated about PA 161 than the dental hygiene students, and the dental faculty members were less informed than the dental hygiene faculty members and dental hygienists. Responding dental hygiene faculty members and dental hygienists had more positive attitudes about PA 161 than did the students and dental faculty members. Most of the dental hygiene faculty members and dental hygienists knew a person providing services in a PA 161 program. Most dental hygiene students, faculty members, and dental hygienists wanted more education about PA 161. Overall, the better educated about the program the respondents were, the more positive their attitudes, and the more interested they were in learning more.

  10. Dental Laboratory Technician.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. Center on Education and Training for Employment.

    This document, which is designed for use in developing a tech prep competency profile for the occupation of dental laboratory technician, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general and 8 units to the occupation of dental laboratory technician. The following skill areas…

  11. Dental Charting. Student's Manual.

    ERIC Educational Resources Information Center

    Weaver, Trudy Karlene; Apfel, Maura

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: dental anatomical terminology; tooth numbering systems;…

  12. Workbook for Dental Records.

    ERIC Educational Resources Information Center

    Carpenter, Corinne K.; Volpe, Margaret E.

    This workbook contains l8 units of instruction for dental assistant students, each designed to give students practical experience in completing forms that simulate realistic situations in a dental office. Units are: (1) The Appointment Record, (2) The Recall System, (3) Clinical Records, (4) Estimates, (5) Daily Record Sheet, (6) Patient's…

  13. Computer-aided diagnosis of pulmonary diseases using x-ray darkfield radiography.

    PubMed

    Einarsdóttir, Hildur; Yaroshenko, Andre; Velroyen, Astrid; Bech, Martin; Hellbach, Katharina; Auweter, Sigrid; Yildirim, Önder; Meinel, Felix G; Eickelberg, Oliver; Reiser, Maximilian; Larsen, Rasmus; Ersbøll, Bjarne Kjær; Pfeiffer, Franz

    2015-12-21

    In this work we develop a computer-aided diagnosis (CAD) scheme for classification of pulmonary disease for grating-based x-ray radiography. In addition to conventional transmission radiography, the grating-based technique provides a dark-field imaging modality, which utilizes the scattering properties of the x-rays. This modality has shown great potential for diagnosing early stage emphysema and fibrosis in mouse lungs in vivo. The CAD scheme is developed to assist radiologists and other medical experts to develop new diagnostic methods when evaluating grating-based images. The scheme consists of three stages: (i) automatic lung segmentation; (ii) feature extraction from lung shape and dark-field image intensities; (iii) classification between healthy, emphysema and fibrosis lungs. A study of 102 mice was conducted with 34 healthy, 52 emphysema and 16 fibrosis subjects. Each image was manually annotated to build an experimental dataset. System performance was assessed by: (i) determining the quality of the segmentations; (ii) validating emphysema and fibrosis recognition by a linear support vector machine using leave-one-out cross-validation. In terms of segmentation quality, we obtained an overlap percentage (Ω) 92.63  ±  3.65%, Dice Similarity Coefficient (DSC) 89.74  ±  8.84% and Jaccard Similarity Coefficient 82.39  ±  12.62%. For classification, the accuracy, sensitivity and specificity of diseased lung recognition was 100%. Classification between emphysema and fibrosis resulted in an accuracy of 93%, whilst the sensitivity was 94% and specificity 88%. In addition to the automatic classification of lungs, deviation maps created by the CAD scheme provide a visual aid for medical experts to further assess the severity of pulmonary disease in the lung, and highlights regions affected.

  14. Computer-aided diagnosis of pulmonary diseases using x-ray darkfield radiography

    NASA Astrophysics Data System (ADS)

    Einarsdóttir, Hildur; Yaroshenko, Andre; Velroyen, Astrid; Bech, Martin; Hellbach, Katharina; Auweter, Sigrid; Yildirim, Önder; Meinel, Felix G.; Eickelberg, Oliver; Reiser, Maximilian; Larsen, Rasmus; Kjær Ersbøll, Bjarne; Pfeiffer, Franz

    2015-12-01

    In this work we develop a computer-aided diagnosis (CAD) scheme for classification of pulmonary disease for grating-based x-ray radiography. In addition to conventional transmission radiography, the grating-based technique provides a dark-field imaging modality, which utilizes the scattering properties of the x-rays. This modality has shown great potential for diagnosing early stage emphysema and fibrosis in mouse lungs in vivo. The CAD scheme is developed to assist radiologists and other medical experts to develop new diagnostic methods when evaluating grating-based images. The scheme consists of three stages: (i) automatic lung segmentation; (ii) feature extraction from lung shape and dark-field image intensities; (iii) classification between healthy, emphysema and fibrosis lungs. A study of 102 mice was conducted with 34 healthy, 52 emphysema and 16 fibrosis subjects. Each image was manually annotated to build an experimental dataset. System performance was assessed by: (i) determining the quality of the segmentations; (ii) validating emphysema and fibrosis recognition by a linear support vector machine using leave-one-out cross-validation. In terms of segmentation quality, we obtained an overlap percentage (Ω) 92.63  ±  3.65%, Dice Similarity Coefficient (DSC) 89.74  ±  8.84% and Jaccard Similarity Coefficient 82.39  ±  12.62%. For classification, the accuracy, sensitivity and specificity of diseased lung recognition was 100%. Classification between emphysema and fibrosis resulted in an accuracy of 93%, whilst the sensitivity was 94% and specificity 88%. In addition to the automatic classification of lungs, deviation maps created by the CAD scheme provide a visual aid for medical experts to further assess the severity of pulmonary disease in the lung, and highlights regions affected.

  15. Detectability of regional lung ventilation with flat-panel detector-based dynamic radiography.

    PubMed

    Tanaka, Rie; Sanada, Shigeru; Okazaki, Nobuo; Kobayashi, Takeshi; Suzuki, Masayuki; Matsui, Takeshi; Matsui, Osamu

    2008-03-01

    This study was performed to investigate the ability of breathing chest radiography using flat-panel detector (FPD) to quantify relative local ventilation. Dynamic chest radiographs during respiration were obtained using a modified FPD system. Imaging was performed in three different positions, ie, standing and right and left decubitus positions, to change the distribution of local ventilation. We measured the average pixel value in the local lung area. Subsequently, the interframe differences, as well as difference values between maximum inspiratory and expiratory phases, were calculated. The results were visualized as images in the form of a color display to show more or less x-ray translucency. Temporal changes and spatial distribution of the results were then compared to lung physiology. In the results, the average pixel value in each lung was associated with respiratory phase. In all positions, respiratory changes of pixel value in the lower area were greater than those in the upper area (P < 0.01), which was the same tendency as the regional differences in ventilation determined by respiratory physiology. In addition, in the decubitus position, it was observed that areas with large respiratory changes in pixel value moved up in the vertical direction during expiration, which was considered to be airway closure. In conclusion, breathing chest radiography using FPD was shown to be capable of quantifying relative ventilation in local lung area and detecting regional differences in ventilation and timing of airway closure. This method is expected to be useful as a new diagnostic imaging modality for evaluating relative local ventilation.

  16. Dental Fear Among University Employees: Implications for Dental Education.

    ERIC Educational Resources Information Center

    Kaakko, Tarja; Milgrom, Peter; Coldwell, Susan E.; Getz, Tracy; Weinstein, Philip; Ramsay, Douglas S.

    1998-01-01

    A survey of 270 University of Washington permanent employees who were potential candidates for teaching clinics, found dental anxiety prevalent, correlating with poorer perceived dental health, longer intervals between dental appointments, higher frequency of past fear behaviors, more physical symptoms during last dental injection, and more…

  17. Storage phosphor radiography of wrist fractures: a subjective comparison of image quality at varying exposure levels.

    PubMed

    Peer, Regina; Lanser, Anton; Giacomuzzi, Salvatore M; Pechlaner, Sigurd; Künzel, Heinz; Bodner, Gerd; Gaber, O; Jaschke, Werner; Peer, Siegfried

    2002-06-01

    Image quality of storage phosphor radiographs acquired at different exposure levels was compared to define the minimal radiation dose needed to achieve images which allow for reliable detection of wrist fractures. In a study on 33 fractured anatomical wrist specimens image quality of storage phosphor radiographs was assessed on a diagnostic PACS workstation by three observers. Images were acquired at exposure levels corresponding to a speed classes 100, 200, 400 and 800. Cortical bone surface, trabecular bone, soft tissues and fracture delineation were judged on a subjective basis. Image quality was rated according to a standard protocol and statistical evaluation was performed based on an analysis of variance (ANOVA). Images at a dose reduction of 37% were rated sufficient quality without loss in diagnostic accuracy. Sufficient trabecular and cortical bone presentation was still achieved at a dose reduction of 62%. The latter images, however, were considered unacceptable for fracture detection. To achieve high-quality storage phosphor radiographs, which allow for a reliable evaluation of wrist fractures, a minimum exposure dose equivalent to a speed class of 200 is needed. For general-purpose skeletal radiography, however, a dose reduction of up to 62% can be achieved. A choice of exposure settings according to the clinical situation (ALARA principle) is recommended to achieve possible dose reductions.

  18. Application of a novel confocal imaging technique for early the detection of dental decay

    NASA Astrophysics Data System (ADS)

    Rousseau, Christel; Girkin, John M.; Vaidya, Shilpa; Hall, Andrew F.; Whitters, C. J.; Creanor, Steve L.

    2002-06-01

    In order to stop or prevent the progression of dental disease, early detection and quantification of decay are crucially important. Dental decay (caries) detection methods have traditionally involved clinical examination by eye, using probes and dental radiography, but up to 60% of lesions are missed. What the dentist requires is a cheap, reliable method of detection of early disease, ideally with information on the depth and rate of growth or healing. Conventional commercial scanning confocal microscopes are unsuitable for use on dental patients. We report on a fibre optic based confocal microscope designed for in vivo examination of caries lesions. The system utilizes a common fibre both as the source and to detect the reflected confocal signal. The initial system has been optimized using dielectric mirrors and the thickness of the stack has been measured with high precision. Dental samples have been examined and the system has been demonstrated to provide information on the depth and mineral loss of a lesion. Fibre optic microscopy (FOCM) demonstrates a practical route to developing an in vivo caries profiler. In this paper, the FOCM and its applications in caries detection are described and the potential of this scheme as a practical dental probe is discussed.

  19. [Thalassaemia diagnostics].

    PubMed

    Kusters, Elske; Kerkhoffs, Jean-Louis H; van Rossum, André P

    2014-01-01

    The thalassaemias are characterised by quantitative aberrations in the production of the globin chains that make up haemoglobin, and are a subgroup of the haemoglobinopathies. In this LabQuiz we show how thalassaemia carrier status can be indicated in the results of regular laboratory tests, and discuss the laboratory diagnostics that can confirm or rule out thalassaemia. In these two cases we will present a man of Moroccan descent, and two brothers of Filipino descent, all with anaemia and microcytosis. We show it is possible to differentiate between iron-deficiency anaemia and thalassaemia carrier status on the basis of a complete blood count and measurement of ferritin levels, and which laboratory diagnostics can be subsequently performed in order to confirm a suspicion of thalassaemia. The background section discusses the properties and pitfalls of routine laboratory diagnostics for the thalassaemias, and thalassaemia diagnostics in the Dutch newborn screening programme.

  20. Proton Radiography: Cross Section Measurements and Detector Development

    SciTech Connect

    Michael J. Longo; H. R. Gustafson: Durga Rajaram; Turgun Nigmanov

    2010-04-16

    Proton radiography has become an important tool for predicting the performance of stockpiled nuclear weapons. Current proton radiography experiments at LANSCE are confined to relatively small targets on the order of centimeters in size because of the low beam energy. LANL scientists have made radiographs with 12 and 24 GeV protons produced by the accelerator at Brookhaven National Laboratory. These energies are in the range required for hydrotest radiography. The design of a facility for hydrotest radiography requires knowledge of the cross sections for producing high-energy particles in the forward direction, which are incorporated into the Monte Carlo simulation used in designing the beam and detectors. There are few existing measurements of neutron production cross sections for proton-nuclei interactions in the 50 GeV range, and almost no data exist for forward neutron production, especially for heavy target nuclei. Thus the data from the MIPP EMCAL and HCAL, for which our group was responsible, are critical to proton radiography. Since neutrons and photons cannot be focused by magnets, they cause a background “fog” on the images. This problem can be minimized by careful design of the focusing system and detectors. The purpose of our research was to measure forward production of neutrons produced by high-energy proton beams striking a variety of targets. The forward-going particles carry most of the energy from a high-energy proton interaction, so these are the most important to proton radiography. This work was carried out in conjunction with the Fermilab E-907 (MIPP) collaboration. Our group was responsible for designing and building the E907 forward neutron and photon calorimeters. With the support of our Stewardship Science Academic Alliances grants, we were able to design, build, and commission the calorimeters on budget and ahead of schedule. The MIPP experiment accumulated a large amount of data in the first run that ended in early 2006. Our group has

  1. Utilization of dental services as a risk factor for periodontitis.

    PubMed

    Brown, L J; Garcia, R

    1994-05-01

    The relation between utilization of dental services from community dentists and the extent and severity of alveolar bone loss is reported for a panel of men followed for over 6 years. Oral health data were collected by the Department of Veterans Affairs, Dental Longitudinal Study, which began in 1969 and still continues. Participants have received regular oral examinations approximately every 3 years. A variety of oral health conditions were assessed, including plaque, calculus, gingival inflammation, probing depth, tooth mobility, clinical attachment level, and alveolar bone loss. Utilization data were abstracted from the dental records of dental offices that participants attended from 1979 through 1988. Multivariate modeling as well as comparisons of high utilizers and non-utilizers indicate that utilization of routine diagnostic and preventive services was not predictive of the extent and severity of periodontitis.

  2. Dental Wear: A Scanning Electron Microscope Study

    PubMed Central

    Levrini, Luca; Di Benedetto, Giulia

    2014-01-01

    Dental wear can be differentiated into different types on the basis of morphological and etiological factors. The present research was carried out on twelve extracted human teeth with dental wear (three teeth showing each type of wear: erosion, attrition, abrasion, and abfraction) studied by scanning electron microscopy (SEM). The study aimed, through analysis of the macro- and micromorphological features of the lesions (considering the enamel, dentin, enamel prisms, dentinal tubules, and pulp), to clarify the different clinical and diagnostic presentations of dental wear and their possible significance. Our results, which confirm current knowledge, provide a complete overview of the distinctive morphology of each lesion type. It is important to identify the type of dental wear lesion in order to recognize the contributing etiological factors and, consequently, identify other more complex, nondental disorders (such as gastroesophageal reflux, eating disorders). It is clear that each type of lesion has a specific morphology and mechanism, and further clinical studies are needed to clarify the etiological processes, particularly those underlying the onset of abfraction. PMID:25548769

  3. Dental wear: a scanning electron microscope study.

    PubMed

    Levrini, Luca; Di Benedetto, Giulia; Raspanti, Mario

    2014-01-01

    Dental wear can be differentiated into different types on the basis of morphological and etiological factors. The present research was carried out on twelve extracted human teeth with dental wear (three teeth showing each type of wear: erosion, attrition, abrasion, and abfraction) studied by scanning electron microscopy (SEM). The study aimed, through analysis of the macro- and micromorphological features of the lesions (considering the enamel, dentin, enamel prisms, dentinal tubules, and pulp), to clarify the different clinical and diagnostic presentations of dental wear and their possible significance. Our results, which confirm current knowledge, provide a complete overview of the distinctive morphology of each lesion type. It is important to identify the type of dental wear lesion in order to recognize the contributing etiological factors and, consequently, identify other more complex, nondental disorders (such as gastroesophageal reflux, eating disorders). It is clear that each type of lesion has a specific morphology and mechanism, and further clinical studies are needed to clarify the etiological processes, particularly those underlying the onset of abfraction.

  4. Genetic factors affecting dental caries risk.

    PubMed

    Opal, S; Garg, S; Jain, J; Walia, I

    2015-03-01

    This article reviews the literature on genetic aspects of dental caries and provides a framework for the rapidly changing disease model of caries. The scope is genetic aspects of various dental factors affecting dental caries. The PubMed database was searched for articles with keywords 'caries', 'genetics', 'taste', 'diet' and 'twins'. This was followed by extensive handsearching using reference lists from relevant articles. The post-genomic era will present many opportunities for improvement in oral health care but will also present a multitude of challenges. We can conclude from the literature that genes have a role to play in dental caries; however, both environmental and genetic factors have been implicated in the aetiology of caries. Additional studies will have to be conducted to replicate the findings in a different population. Identification of genetic risk factors will help screen and identify susceptible patients to better understand the contribution of genes in caries aetiopathogenesis. Information derived from these diverse studies will provide new tools to target individuals and/or populations for a more efficient and effective implementation of newer preventive measures and diagnostic and novel therapeutic approaches in the management of this disease.

  5. Diagnostics and Ancillary Tests of Neurologic Dysfunction in the Ruminant.

    PubMed

    Nagy, Dusty W

    2017-03-01

    A variety of diagnostic tests can be used to help further characterize and diagnose neurologic disease in ruminant species. Cerebrospinal fluid is easily collected, and analysis can help in defining the broad category of disease. Diagnostic imaging, including radiography, myelography, ultrasonography, computed tomography, and MRI, have all been used to varying degrees in ruminants. Advanced cross-sectional imaging techniques have the capacity to aid greatly in diagnosis, but their cost can often be prohibitive. Currently, electrodiagnostic tests are not well evaluated or used in the diagnosis of neurologic disease in ruminants.

  6. Health Instruction Packages: Permanent Teeth, Dental Deposits, and Dental Instruments. Dientes Permanentes, Depositos Dentales y Instrumentos Dentales.

    ERIC Educational Resources Information Center

    Lind, Patricia; Germano, Catherine

    These five learning modules use text interspersed with illustrations and reinforcement exercises to instruct dental aide and dental hygiene students about jaw bones and gums, dental deposits, and dental instruments. The first four modules were prepared by Patricia Lind in both Spanish and English. "The Gum and Bone of Permanent Teeth"…

  7. Teledentistry-assisted, affiliated practice for dental hygienists: an innovative oral health workforce model.

    PubMed

    Summerfelt, Fred F

    2011-06-01

    The 2010 U.S. Patient Protection and Affordable Care Act (PPACA) calls for training programs to develop mid-level dental health care providers to work in areas with underserved populations. In 2004, legislation was passed in Arizona allowing qualified dental hygienists to enter into an affiliated practice relationship with a dentist to provide oral health care services for underserved populations without general or direct supervision in public health settings. In response, the Northern Arizona University (NAU) Dental Hygiene Department developed a teledentistry-assisted, affiliated practice dental hygiene model that places a dental hygienist in the role of the mid-level practitioner as part of a digitally linked oral health care team. Utilizing current technologies, affiliated practice dental hygienists can digitally acquire and transmit diagnostic data to a distant dentist for triage, diagnosis, and patient referral in addition to providing preventive services permitted within the dental hygiene scope of practice. This article provides information about the PPACA and the Arizona affiliated practice dental hygiene model, defines teledentistry, identifies the digital equipment used in NAU's teledentistry model, give an overview of NAU's teledentistry training, describes NAU's first teledentistry clinical experience, presents statistical analyses and evaluation of NAU students' ability to acquire diagnostically efficacious digital data from remote locations, and summarizes details of remote applications of teledentistry-assisted, affiliated practice dental hygiene workforce model successes.

  8. A new scanner for in situ digital radiography of paintings

    NASA Astrophysics Data System (ADS)

    Impallaria, Anna; Evangelisti, Federico; Petrucci, Ferruccio; Tisato, Flavia; Castelli, Lisa; Taccetti, Francesco

    2016-12-01

    X-ray radiography is one of the most widely used imaging techniques in the field of cultural heritage, both for conservation and for investigation purposes. Performing radiographies in museums, thus avoiding movements of works of art, has been recently made easy by digital acquisition of images, but when the whole scan of a large painting is required, technical solutions for a portable device are still not at hand. The inherent weight of the X-ray tube and of the high-voltage generator makes the design of a portable device very difficult. In this project, the solution of the puzzle was separating devices devoted to different tasks, in order to maintain each item under 60 kg weight, thus being transportable with reasonable effort.

  9. Human performance analysis of industrial radiography radiation exposure events

    SciTech Connect

    Reece, W.J.; Hill, S.G.

    1995-12-01

    A set of radiation overexposure event reports were reviewed as part of a program to examine human performance in industrial radiography for the US Nuclear Regulatory Commission. Incident records for a seven year period were retrieved from an event database. Ninety-five exposure events were initially categorized and sorted for further analysis. Descriptive models were applied to a subset of severe overexposure events. Modeling included: (1) operational sequence tables to outline the key human actions and interactions with equipment, (2) human reliability event trees, (3) an application of an information processing failures model, and (4) an extrapolated use of the error influences and effects diagram. Results of the modeling analyses provided insights into the industrial radiography task and suggested areas for further action and study to decrease overexposures.

  10. Californium Multiplier. Part I. Design for neutron radiography

    SciTech Connect

    Crosbie, K.L.; Preskitt, C.A.; John, J.; Hastings, J.D.

    1982-04-01

    The Californium Multiplier (CFX) is a subcritical assembly of enriched uranium surrounding a californium-252 neutron source. The function of the CFX is to multiply the neutrons emitted by the source to a number sufficient for neutron radiography. The CFX is designed to provide a collimated beam of thermal neutrons from which the gamma radiation is filtered, and the scattered neutrons are reduced to make it suitable for high resolution radiography. The entire system has inherent safety features, which provide for system and personnel safety, and it operates at moderate cost. In Part I, the CFX and the theory of its operation are described in detail. Part II covers the performance of the Mound Facility CFX.

  11. Radiography and ultrasonic calculation workbooks: installation and use

    SciTech Connect

    Rikard, D; Dolan, K

    2000-03-24

    The radiography and ultrasonic calculation workbooks are intended to assist Level I, II and III NDE personnel in calculations used in routine job applications. These workbooks are an upgraded version of Microsoft Excel{reg_sign} spreadsheets, which were originally set up in October 1988, using a Macintosh Plus{reg_sign} computer and Microsoft Excel{reg_sign} version 1.5. A description of these was released as ''Computerized Calculations for Radiography and Ultrasonics'', UCRL-JC-105419 in November 1990 and published in Materials Evaluation, Volume 49/Number 4, in April 1991. Over the years as Microsoft improved the capabilities of the Excel program to include the abilities to make sketches and to have multiple tabbed pages in a document called a ''workbook'' we have now modified the calculation spreadsheets to include these enhancements. Following is a short description on how to install and use these workbooks on a Macintosh or PC.

  12. Proton radiography and tomography with application to proton therapy.

    PubMed

    Poludniowski, G; Allinson, N M; Evans, P M

    2015-09-01

    Proton radiography and tomography have long promised benefit for proton therapy. Their first suggestion was in the early 1960s and the first published proton radiographs and CT images appeared in the late 1960s and 1970s, respectively. More than just providing anatomical images, proton transmission imaging provides the potential for the more accurate estimation of stopping-power ratio inside a patient and hence improved treatment planning and verification. With the recent explosion in growth of clinical proton therapy facilities, the time is perhaps ripe for the imaging modality to come to the fore. Yet many technical challenges remain to be solved before proton CT scanners become commonplace in the clinic. Research and development in this field is currently more active than at any time with several prototype designs emerging. This review introduces the principles of proton radiography and tomography, their historical developments, the raft of modern prototype systems and the primary design issues.

  13. The MU-RAY detector for muon radiography of volcanoes

    NASA Astrophysics Data System (ADS)

    Anastasio, A.; Ambrosino, F.; Basta, D.; Bonechi, L.; Brianzi, M.; Bross, A.; Callier, S.; Caputo, A.; Ciaranfi, R.; Cimmino, L.; D'Alessandro, R.; D'Auria, L.; de La Taille, C.; Energico, S.; Garufi, F.; Giudicepietro, F.; Lauria, A.; Macedonio, G.; Martini, M.; Masone, V.; Mattone, C.; Montesi, M. C.; Noli, P.; Orazi, M.; Passeggio, G.; Peluso, R.; Pla-Dalmau, A.; Raux, L.; Rubinov, P.; Saracino, G.; Scarlini, E.; Scarpato, G.; Sekhniaidze, G.; Starodubtsev, O.; Strolin, P.; Taketa, A.; Tanaka, H. K. M.; Vanzanella, A.

    2013-12-01

    The MU-RAY detector has been designed to perform muon radiography of volcanoes. The possible use on the field introduces several constraints. First the electric power consumption must be reduced to the minimum, so that the detector can be solar-powered. Moreover it must be robust and transportable, for what concerns the front-end electronics and data acquisition. A 1 m2 prototype has been constructed and is taking data at Mt. Vesuvius. The detector consists of modules of 32 scintillator bars with wave length shifting fibers and silicon photomultiplier read-out. A dedicated front-end electronics has been developed, based on the SPIROC ASIC. An introduction to muon radiography principles, the MU-RAY detector description and results obtained in laboratory will be presented.

  14. Comparison of Digital Imaging Systems for Neutron Radiography

    NASA Astrophysics Data System (ADS)

    Pugliesi, R.; Pugliesi, Fábio; Stanojev Pereira, M. A.

    2011-09-01

    The characteristics of three digital imaging systems for neutron radiography purposes have been compared. Two of them make use of films, CR-39 and Kodak AA, and the third makes use of a LiF scintillator, for image registration. The irradiations were performed in the neutron radiography facility installed at the IEA-R1 nuclear research reactor of IPEN-CNEN/SP. According to the obtained results, the system based on CR-39 is the slowest to obtain an image, and the best in terms of resolution but the worse in terms of contrast. The system based on Kodak AA is faster than the prior, exhibits good resolution and contrast. The system based on the scintillator is the fastest to obtain an image, and best in terms of contrast but the worse in terms of resolution.

  15. Monte Carlo Modeling of High-Energy Film Radiography

    SciTech Connect

    Miller, A.C., Jr.; Cochran, J.L.; Lamberti, V.E.

    2003-03-28

    High-energy film radiography methods, adapted in the past to performing specific tasks, must now meet increasing demands to identify defects and perform critical measurements in a wide variety of manufacturing processes. Although film provides unequaled resolution for most components and assemblies, image quality must be enhanced with much more detailed information to identify problems and qualify features of interest inside manufactured items. The work described is concerned with improving current 9 MeV nondestructive practice by optimizing the important parameters involved in film radiography using computational methods. In order to follow important scattering effects produced by electrons, the Monte Carlo N-Particle (MCNP) transport code was used with advanced, highly parallel computer systems. The work has provided a more detailed understanding of latent image formation at high X-ray energies, and suggests that improvements can be made in our ability to identify defects and to obtain much more detail in images of fine features.

  16. Lung nodules detection in chest radiography: image components analysis

    NASA Astrophysics Data System (ADS)

    Luo, Tao; Mou, Xuanqin; Yang, Ying; Yan, Hao

    2009-02-01

    We aimed to evaluate the effect of different components of chest image on performances of both human observer and channelized Fisher-Hotelling model (CFH) in nodule detection task. Irrelevant and relevant components were separated from clinical chest radiography by employing Principal Component Analysis (PCA) methods. Human observer performance was evaluated in two-alternative forced-choice (2AFC) on original clinical images and anatomical structure only images obtained by PCA methods. Channelized Fisher-Hotelling model with Laguerre-Gauss basis function was evaluated to predict human performance. We show that relevant component is the primary factor influencing on nodule detection in chest radiography. There is obvious difference of detectability between human observer and CFH model for nodule detection in images only containing anatomical structure. CFH model should be used more carefully.

  17. Study of a Loop Heat Pipe Using Neutron Radiography

    SciTech Connect

    C. Thomas Conroy; A. A. El-Ganayni; David R. Riley; John M. Cimbala; Jack S. Brenizer, Jr.; Abel Po-Ya Chuang; Shane Hanna

    2001-08-01

    An explanation is given of what a loop heat pipe (LHP) is, and how it works. It is then shown that neutron imaging (both real time neutron radioscopy and single exposure neutron radiography) is an effective experimental tool for the study of LHPs. Specifically, neutron imaging has helped to identify and correct a cooling water distribution problem in the condenser, and has enabled visualization of two-phase flow (liquid and vapor) in various components of the LHP. In addition, partial wick dry-out, a phenomenon of great importance in the effective operation of LHPs, has been identified with neutron imaging. It is anticipated that neutron radioscopy and radiography will greatly contribute to our understanding of LHP operation, and will lead to improvement of LHP modeling and design.

  18. Flash radiography with 24 GeV/c protons

    SciTech Connect

    Morris, C. L.; Alrick, K. R.; Buescher, K. L.; Cagliostro, D. J.; Clark, D. A.; Clark, D. J.; Espinoza, C. J.; Ferm, E. N.; Gallegos, R. A.; Gomez, J. J.; Hogan, G. E.; King, N. S. P.; Kwiatkowski, K.; Liljestrand, R. P.; Mariam, F. G.; Merrill, F. E.; Morley, K. B.; Mottershead, C. T.; Murray, M. M.; Pazuchanics, P. D.

    2011-05-15

    The accuracy of density measurements and position resolution in flash (40 ns) radiography of thick objects with 24 Gev/c protons is investigated. A global model fit to step wedge data is shown to give a good description spanning the periodic table. The parameters obtained from the step wedge data are used to predict transmission through the French Test Object (FTO), a test object of nested spheres, to a precision better than 1%. Multiple trials have been used to show that the systematic errors are less than 2%. Absolute agreement between the average radiographic measurements of the density and the known density is 1%. Spatial resolution has been measured to be 200 {mu}m at the center of the FTO. These data verify expectations of the benefits provided by high energy hadron radiography for thick objects.

  19. [Development of breathing chest radiography: study of exposure timing].

    PubMed

    Tanaka, Rie; Sanada, Shigeru; Kobayashi, Takeshi; Suzuki, Masayuki; Matsui, Takeshi; Inoue, Hitoshi

    2003-08-01

    The flat-panel detector (FPD) has been introduced into clinical practice. A modified FPD, which has the ability to obtain dynamic chest radiographs, was introduced into our hospital, and clinical testing is ongoing. Both the inspiratory and expiratory phases have to be included in dynamic chest radiographs. The purpose of this study was to investigate the most appropriate chest radiography signal for observation of the respiratory process. We prepared ten protocol patterns that differed in terms of respiratory phase at X-ray exposure, exposure duration, and signal multiplicity. We also performed preliminary experiments and administered several questionnaires to ten volunteers. The volunteers breathed according to vocal and visual signals, and their respiratory waves were recorded by spirometer. The most appropriate protocol was similar to the method used for conventional chest radiography.

  20. Proton radiography and tomography with application to proton therapy

    PubMed Central

    Allinson, N M; Evans, P M

    2015-01-01

    Proton radiography and tomography have long promised benefit for proton therapy. Their first suggestion was in the early 1960s and the first published proton radiographs and CT images appeared in the late 1960s and 1970s, respectively. More than just providing anatomical images, proton transmission imaging provides the potential for the more accurate estimation of stopping-power ratio inside a patient and hence improved treatment planning and verification. With the recent explosion in growth of clinical proton therapy facilities, the time is perhaps ripe for the imaging modality to come to the fore. Yet many technical challenges remain to be solved before proton CT scanners become commonplace in the clinic. Research and development in this field is currently more active than at any time with several prototype designs emerging. This review introduces the principles of proton radiography and tomography, their historical developments, the raft of modern prototype systems and the primary design issues. PMID:26043157

  1. An improved method for profile radiography of piping

    SciTech Connect

    Bell, M.S.; Haupt, J.D.

    1996-07-01

    The Petro-Chemical industry has used profile radiography for more than thirty years to find, and evaluate, corrosion in piping systems. The technique offers a method of ``seeing into`` a piece of pipe. This allows the inspector to see the ``whole picture``. Single point ultrasonic measurements cannot provide this degree of information. Shell`s objective for studying the use of this method centered on optimizing their profile radiography technique to improve accuracy and reproducibility of wall thickness measurements. Accuracy and reproducibility of measurements are particularly important when used to determine corrosion rates. To help achieve this objective, the authors developed an inspection procedure to minimize the more prominent sources of inaccuracies associated with this technique. Along with this procedure, they also developed an associated training program. All of Shell Oil`s Pressure Equipment inspectors and key contract employees have received this training.

  2. Study of a loop heat pipe using neutron radiography.

    PubMed

    Cimbala, John M; Brenizer, Jack S; Chuang, Abel Po-Ya; Hanna, Shane; Thomas Conroy, C; El-Ganayni, A A; Riley, David R

    2004-10-01

    An explanation is given of what a loop heat pipe (LHP) is, and how it works. It is then shown that neutron imaging (both real time neutron radioscopy and single exposure neutron radiography) is an effective experimental tool for the study of LHPs. Specifically, neutron imaging has helped to identify and correct a cooling water distribution problem in the condenser, and has enabled visualization of two-phase flow (liquid and vapor) in various components of the LHP. In addition, partial wick dry-out, a phenomenon of great importance in the effective operation of LHPs, is potentially identifiable with neutron imaging. It is anticipated that neutron radioscopy and radiography will greatly contribute to our understanding of LHP operation, and will lead to improvement of LHP modeling and design.

  3. Diagnostic problems in oral pathology.

    PubMed

    Dunlap, C L; Barker, B F

    1985-02-01

    Diagnostic problems within the oral cavity may be associated with lesions of the odontogenic apparatus, salivary glands, bone, mucosa, and connective tissue. Some lesions are unique to the oral cavity, others have a systemic distribution. Several unique and controversial lesions have been selected for discussion, including (1) necrotizing sialometaplasia, a benign salivary gland disease easily mistaken for malignancy; (2) verrucous lesions including verrucous carcinoma, verrucous hyperplasia, and papillary carcinoma; (3) spindle-cell carcinoma, which is often confused with sarcoma; (4) named and unnamed embryonic rests, which may resemble metastatic carcinomas; (5) dental pulp mistaken for odontogenic myxoma; and (6) granular cell tumor with associated pseudoepitheliomatous hyperplasia.

  4. Subtraction Radiography for the Diagnosis of Bone Lesions in Dogs.

    DTIC Science & Technology

    1984-05-31

    Avail ander Journal of Periodontology Dist Special Ř 211 East Chicago Avenue Room 924 Chicago, IL 60611 Dear Sirs: I m submitting an original...research article titled "Subtraction Radiography for the Diagnosis of Bone Lesions in Dogs" solely to the Journal of Periodontology for review and... clinical practice in our area. 60-70 Kvp would have produced more contrast in the radiographic films used for the conventional technique, but likely

  5. Absorbed radiation by various tissues during simulated endodontic radiography

    SciTech Connect

    Torabinejad, M.; Danforth, R.; Andrews, K.; Chan, C.

    1989-06-01

    The amount of absorbed radiation by various organs was determined by placing lithium fluoride thermoluminescent chip dosimeters at selected anatomical sites in and on a human-like X-ray phantom and exposing them to radiation at 70- and 90-kV X-ray peaks during simulated endodontic radiography. The mean exposure dose was determined for each anatomical site. The results show that endodontic X-ray doses received by patients are low when compared with other radiographic procedures.

  6. PyRAT - python radiography analysis tool (u)

    SciTech Connect

    Temple, Brian A; Buescher, Kevin L; Armstrong, Jerawan C

    2011-01-14

    PyRAT is a radiography analysis tool used to reconstruction images of unknown 1-0 objects. The tool is written in Python and developed for use on LINUX and Windows platforms. The tool is capable of performing nonlinear inversions of the images with minimal manual interaction in the optimization process. The tool utilizes the NOMAD mixed variable optimization tool to perform the optimization.

  7. Non-damaging, portable radiography: Applications in arms control verification

    SciTech Connect

    Morris, R.A.; Butterfield, K.B.; Apt, K.E.

    1992-08-01

    The state-of-the-technology necessary to perform portable radiography in support of arms control verification is evaluated. Specific requirements, such as accurate measurements of the location of features in a treaty-limited object and the detection of deeply imbedded features, are defined in three scenarios. Sources, detectors, portability, mensuration, and safety are discussed in relation to the scenarios. Examples are given of typical radiographic systems that would be capable of addressing the inspection problems associated with the three scenarios.

  8. X-Ray Radiography of Gas Turbine Ceramics.

    DTIC Science & Technology

    1979-10-20

    Microfocus X - ray equipment. 1a4ihe definition of equipment concepts for a computer assisted tomography (CAT) system; and 4ffthe development of a CAT...were obtained from these test coupons using Microfocus X - ray and image en- hancement techniques. A Computer Assisted Tomography (CAT) design concept...conventional ultrasonics (45 MHz), very high frequency ultrasonics (250 MHz), neutron radiography, Microfocus X - ray , image enhancement, microwave

  9. Imaging Brunelleschi's cupola wall using muon scattering radiography

    SciTech Connect

    Guardincerri, Elena

    2015-09-16

    This PowerPoint presentation describes the cupola's structure and current reinforcements, reasoning behind why muon radiography would be helpful. A demonstration project is described where a similar wall was constructed to illustrate the potential benefits to Italian authorities; Requirements and a potential plan were created and collaboration to make it happen was deemed to be possible among LANL, Toshiba, the Parma and Florence Universities and the Opera del Duomo,

  10. Applying high frame-rate digital radiography and dual-energy distributed-sources for advanced tomosynthesis

    NASA Astrophysics Data System (ADS)

    Travish, Gil; Rangel, Felix J.; Evans, Mark A.; Schmiedehausen, Kristin

    2013-09-01

    Conventional radiography uses a single point x-ray source with a fan or cone beam to visualize various areas of the human body. An imager records the transmitted photons—historically film and now increasingly digital radiography (DR) flat panel detectors—followed by optional image post-processing. Some post-processing techniques of particular interest are tomosynthesis, and dual energy subtraction. Tomosynthesis adds the ability to recreate quasi-3D images from a series of 2D projections. These exposures are typically taken along an arc or other path; and, tomosynthesis reconstruction is used to form a three-dimensional representation of the area of interest. Dual-energy radiography adds the ability to enhance or "eliminate" structures based on their different attenuation of well-separated end-point energies in two exposures. These advanced capabilities come at a high cost in terms of complexity, imaging time, capital equipment, space, and potentially reduced image quality due to motion blur if acquired sequentially. Recently, the prospect of creating x-ray sources, which are composed of arrays of micro-emitters, has been put forward. These arrays offer a flat-panel geometry and may afford advantages in fabrication methodology, size and cost. They also facilitate the use of the dual energy technology. Here we examine the possibility of using such an array of x-ray sources combined with high frame-rate (~kHz) DR detectors to produce advanced medical images without the need for moving gantries or other complex motion systems. Combining the advantages of dual energy imaging with the ability to determine the relative depth location of anatomical structures or pathological findings from imaging procedures should prove to be a powerful diagnostic tool. We also present use cases that would benefit from the capabilities of this modality.

  11. Z-petawatt driven ion beam radiography development.

    SciTech Connect

    Schollmeier, Marius; Geissel, Matthias; Rambo, Patrick K.; Schwarz, Jens; Sefkow, Adam B.

    2013-09-01

    Laser-driven proton radiography provides electromagnetic field mapping with high spatiotemporal resolution, and has been applied to many laser-driven High Energy Density Physics (HEDP) experiments. Our report addresses key questions about the feasibility of ion radiography at the Z-Accelerator (%E2%80%9CZ%E2%80%9D), concerning laser configuration, hardware, and radiation background. Charged particle tracking revealed that radiography at Z requires GeV scale protons, which is out of reach for existing and near-future laser systems. However, it might be possible to perform proton deflectometry to detect magnetic flux compression in the fringe field region of a magnetized liner inertial fusion experiment. Experiments with the Z-Petawatt laser to enhance proton yield and energy showed an unexpected scaling with target thickness. Full-scale, 3D radiation-hydrodynamics simulations, coupled to fully explicit and kinetic 2D particle-in-cell simulations running for over 10 ps, explain the scaling by a complex interplay of laser prepulse, preplasma, and ps-scale temporal rising edge of the laser.

  12. A New Neutron Radiography / Tomography / Imaging Station DINGO at OPAL

    NASA Astrophysics Data System (ADS)

    Garbe, U.; Randall, T.; Hughes, C.; Davidson, G.; Pangelis, S.; Kennedy, S. J.

    A new neutron radiography / tomography / imaging instrument DINGO was built to support the area of neutron imaging research (neutron radiography/tomography) at ANSTO. The instrument is designed for an international user community and for routine quality control for defense, industrial, cultural heritage and archaeology applications. In the industrial field it provides a useful tool for studying cracking and defects in steel or other metals. The instrument construction was completed at the end of June 2013 and it is currently in the hot commissioning stage. The usable neutron flux is mainly determined by the neutron source, but it depends on the instrument position and the resolution. The instrument position for DINGO is the thermal neutron beam port HB-2 in the reactor hall. The measured flux (using gold foil) for an L/D of approximately 500 at HB-2 is 5.3*107 [n/cm2s], which is in a similar range to other facilities. A special feature of DINGO is the in-pile collimator position in front of the main shutter at HB-2. The collimator offers two pinholes with a possible L/D of 500 and 1000. A secondary collimator separates the two beams by blocking one and positions another aperture for the other beam. The whole instrument operates in two different positions, one for high resolution and one for high speed. In the current configuration DINGO measured first radiography and tomography data sets on friendly user test samples.

  13. Detection of gastritis by single- and double-contrast radiography

    SciTech Connect

    Thoeni, R.F.; Goldberg, H.I.; Ominsky, S.; Cello, J.P.

    1983-09-01

    Sixty-eight patients with various types of gastritis, 23 patients with normal stomachs, and four patients with other gastric diseases were examined in a prospective study to assess the sensitivity and specificity of single-contrast (SC) and double-contrast (DC) upper gastrointestinal examinations in the evaluation of gastritis. All patients underwent endoscopy with biopsy followed first by DC and then by SC radiography. The respective sensitivities of SC and DC radiography were 58% and 72% for all examinations and 59% and 77% for adequate examinations only. The respective specificities were 59% and 55% based on all examinations. Useful radiographic features included polypoid defects and erosions detected by both methods, abnormal folds and flattened margins detected by the SC technique, and narrowed lumen and crenulated margins detected by the DC technique. In 93% of all cases, the correct diagnosis was based on two or more of these radiographic features. According to this study, the radiographic sensitivity in the detection of gastritis is reliable only in cases of moderate-to-severe disease and only when based on findings of the DC examination. Neither SC nor DC radiography should be used as the primary screening method for patients with suspected gastritis, and the radiographic diagnosis should be restricted to the terms ''erosive'' or ''nonerosive gastritis.''

  14. Proton radiography based on near-threshold Cerenkov radiation

    DOEpatents

    van Bibber, Karl A.; Dietrich, Frank S.

    2003-01-01

    A Cerenkov imaging system for charged particle radiography that determines the energy loss of the charged particle beam passing through an object. This energy loss information provides additional detail on target densities when used with traditional radiographic techniques like photon or x-ray radiography. In this invention a probe beam of 800 MeV to 50 GeV/c charged particles is passed through an object to be imaged, an imaging magnetic spectrometer, to a silicon aerogel Cerenkov radiator where the charged particles emitted Cerenkov light proportional to their velocity. At the same beam focal plane, a particle scintillator produces a light output proportional to the incident beam flux. Optical imaging systems relay the Cerenkov and scintillator information to CCD's or other measurement equipment. A ratio between the Cerenkov and scintillator is formed, which is directly proportional to the line density of the object for each pixel measured. By rotating the object, tomographic radiography may be performed. By applying pulses of beam, discrete time-step movies of dynamic objects may be made.

  15. Advances in computed radiography systems and their physical imaging characteristics.

    PubMed

    Cowen, A R; Davies, A G; Kengyelics, S M

    2007-12-01

    Radiological imaging is progressing towards an all-digital future, across the spectrum of medical imaging techniques. Computed radiography (CR) has provided a ready pathway from screen film to digital radiography and a convenient entry point to PACS. This review briefly revisits the principles of modern CR systems and their physical imaging characteristics. Wide dynamic range and digital image enhancement are well-established benefits of CR, which lend themselves to improved image presentation and reduced rates of repeat exposures. However, in its original form CR offered limited scope for reducing the radiation dose per radiographic exposure, compared with screen film. Recent innovations in CR, including the use of dual-sided image readout and channelled storage phosphor have eased these concerns. For example, introduction of these technologies has improved detective quantum efficiency (DQE) by approximately 50 and 100%, respectively, compared with standard CR. As a result CR currently affords greater scope for reducing patient dose, and provides a more substantive challenge to the new solid-state, flat-panel, digital radiography detectors.

  16. Dental Compressed Air Systems.

    DTIC Science & Technology

    1992-03-01

    I AL-TR-IWI-0uuu AD-A249 954 DENTAL COMPRESSED AIMYTM R Curtis D. Weyrmuch, Mejor, USAP, D Samuel P.Dvs iueatclpi SF.O N AEROSPACE MwaEDIN mwr~ComA G...FUNDING NUMBERS Dental Compressed Air Systems PE - 87714F PR - 7350 TA - 22 D. Weyrauch WU - XX Samuel P. Davis George W. Gaines 7. PERFORMING...words) The purpose of this report is to update guidelines on dental compressed air systems (DCA). Much of the information was obtained from a survey

  17. Standing equine dental surgery.

    PubMed

    Menzies, Robert A; Easley, Jack

    2014-04-01

    Dental surgeries refer to procedures that affect the dental tissues or their supporting structures. With the development of specific, efficacious, and conservative treatments, morbidity risks have been lowered and chances of benefiting the health of equids improved. Advances in quality of sedation, analgesia, and locoregional anesthesia allow a majority of dental surgeries to be performed in the standing patient. This update focuses on an orthograde endodontic technique, a minimally invasive buccotomy technique, with the potential to combine it with a transbuccal screw extraction technique, and revisits the AO pinless external fixator for fractures of the body of the mandible.

  18. Feline dental disease.

    PubMed

    Frost, P; Williams, C A

    1986-09-01

    Periodontal disease and chronic gingivitis/stomatitis are the most common feline dental diseases. With routine dental care and increased emphasis on home oral hygiene, these diseases can be controlled. Cats can be seen with a number of other dental disorders, and improved treatment methods such as restorations of early subgingival resorptive lesions, endodontic therapy, and orthodontic therapy can be performed successfully. More study and research are necessary about the gingivitis/stomatitis syndrome and subgingival resorptive lesions so that improved prevention and treatment recommendations can be made.

  19. Economic impact of dental hygienists on solo dental practices.

    PubMed

    Lazar, Vickie F; Guay, Albert H; Beazoglou, Tryfon J

    2012-08-01

    The fact that a significant percentage of dentists employ dental hygienists raises an important question: Are dental practices that utilize a dental hygienist structurally and operationally different from practices that do not? This article explores differences among dental practices that operate with and without dental hygienists. Using data from the American Dental Association's 2003 Survey of Dental Practice, a random sample survey of U.S. dentists, descriptive statistics were used to compare selected characteristics of solo general practitioners with and without dental hygienists. Multivariate regression analysis was used to estimate the effect of dental hygienists on the gross billings and net incomes of solo general practitioners. Differences in practice characteristics--such as hours spent in the practice and hours spent treating patients, wait time for a recall visit, number of operatories, square feet of office space, net income, and gross billings--were found between solo general practitioners who had dental hygienists and those who did not. Solo general practitioners with dental hygienists had higher gross billings. Higher gross billings would be expected, as would higher expenses. However, net incomes of those with dental hygienists were also higher. In contrast, the mean waiting time for a recall visit was higher among dentists who employed dental hygienists. Depending on personal preferences, availability of qualified personnel, etc., dentists who do not employ dental hygienists but have been contemplating that path may want to further research the benefits and opportunities that may be realized.

  20. Astrovirus Diagnostics

    PubMed Central

    Pérot, Philippe; Lecuit, Marc; Eloit, Marc

    2017-01-01

    Various methods exist to detect an astrovirus infection. Current methods include electron microscopy (EM), cell culture, immunoassays, polymerase chain reaction (PCR) and various other molecular approaches that can be applied in the context of diagnostic or in surveillance studies. With the advent of metagenomics, novel human astrovirus (HAstV) strains have been found in immunocompromised individuals in association with central nervous system (CNS) infections. This work reviews the past and current methods for astrovirus detection and their uses in both research laboratories and for medical diagnostic purposes. PMID:28085120

  1. Determination of diagnostic reference levels in general radiography in Latin America.

    PubMed

    Blanco, Susana; Mora, Patricia; Almonte, Narkiss; Benavente, Tony; Benson, Nadja; Blanco, Daniel; Cárdenas, Juan; Defaz Gómez, Yolanda; Edding, Oscar; Escobar, Carolina; Fonseca, María; Gamarra, Mirtha; García Aguilar, Juan; Khoury, Helen Jamil; Quintero, Ana Rosa; Roas Zuniga, Norma; Zaire, Edgar; Nader, Alejandro

    2013-09-01

    The International Atomic Energy Agency (IAEA) through the International Action Plan on Radiation Protection of Patients and the International Commission on Radiological Protection have for some time carried out important efforts to assure that in the medical applications of the ionising radiations, the optimisation of radiological protection of patients is fundamental, to such a point that the IAEA includes it directly as a requirement for these practices (in its International Basic Safety Standards for Protection against Ionising Radiation and for the Safety of Radiation Sources (BSS)-GSR Part 1, 2011). For this reason, among the objectives of Regional Project RLA/9/057 and Regional Project RLA/9/067, the intention was to establish the dose references in conventional radiology for Latin America, for the purposes of determining whether these doses comply with the requirements of the BSS and to tend to improve practices, in order to minimise the dose received by the patients.

  2. Glossary of Dental Terms

    MedlinePlus

    ... of entire communities, and can design and administer large-scale prevention and dental care programs by compiling and analyzing statistics Radiosurgery surgery technique that uses radio waves to produce a pressureless, ...

  3. Interpretation of dental radiographs.

    PubMed

    Woodward, Tony M

    2009-02-01

    Interpretation of dental radiographs is fairly straightforward, with a handful of common patterns making up the majority of pathology. This article covers normal radiographic anatomy, endodontic disease, periodontal disease, neoplastic changes, tooth resorption, caries, and radiographic signs of oral trauma.

  4. Dental Care in Scleroderma

    MedlinePlus

    ... a side effect • Avoid the spiral of depression – depression causes worse oral health and poor oral health worsens depression. Suggestions for your dental appointments: • Tell the dentist ...

  5. American Dental Education Association

    MedlinePlus

    ... ADEA Application Services ADEA AADSAS® ADEA CAAPID® ADEA PASS® ADEA DHCAS® Career Resources DentEd Jobs Placing Ads ... Students & Residents Prospective Students Application Services AADSAS CAAPID PASS DHCAS ADEA AADSAS Applicants Prospective applicants to dental ...

  6. American Dental Hygienists' Association

    MedlinePlus

    ... Working Column Journal of Dental Hygiene Author Guidelines Advertising Subscribe Resources Resources About ADHA About Promo (DO ... Member Benefits Footer Copy Legal Inquiries | Contact Us | Advertising | Media Inquiries | Staff / Board Login ©2012-2017 ADHA. ...

  7. Dental Treatment Considerations

    MedlinePlus

    ... and modifying dental treatment to accommodate altered muscle strength. Appointment Scheduling It is important to realize that ... and take advantage of the typically greater muscle strength during the morning hours. Appointments are best scheduled ...

  8. Dental Caries (Tooth Decay)

    MedlinePlus

    ... form does not collect any actual information. External Web Site Policy This graphic notice ( ) means that you are ... the link. Home Contact Us Viewers and Players Site Map FOIA Web Policies Privacy Policy National Institute of Dental and ...

  9. Diabetes: Dental Tips

    MedlinePlus

    ... form does not collect any actual information. External Web Site Policy This graphic notice ( ) means that you are ... the link. Home Contact Us Viewers and Players Site Map FOIA Web Policies Privacy Policy National Institute of Dental and ...

  10. Factors associated with no dental treatment in preschoolers with toothache: a cross-sectional study in outpatient public emergency services.

    PubMed

    Machado, Geovanna C M; Daher, Anelise; Costa, Luciane R

    2014-08-08

    Many parents rely on emergency services to deal with their children's dental problems, mostly pain and infection associated with dental caries. This cross-sectional study analyzed the factors associated with not doing an oral procedure in preschoolers with toothache attending public dental emergency services. Data were obtained from the clinical files of preschoolers treated at all nine dental emergency centers in Goiania, Brazil, in 2011. Data were children's age and sex, involved teeth, oral procedures, radiography request, medications prescribed and referrals. A total of 531 files of children under 6 years old with toothache out of 1,108 examined were selected. Children's mean age was 4.1 (SD 1.0) years (range 1-5 years) and 51.6% were girls. No oral procedures were performed in 49.2% of cases; in the other 50.8%, most of the oral procedures reported were endodontic intervention and temporary restorations. Primary molars were involved in 48.4% of cases. With the exception of "sex", the independent variables tested in the regression analysis significantly associated with non-performance of oral procedures: age (OR 0.7; 95% CI 0.5-0.8), radiography request (OR 3.8; 95% CI 1.7-8.2), medication prescribed (OR 7.5; 95% CI 4.9-11.5) and patient referred to another service (OR 5.7; 3.0-10.9). Many children with toothache received no oral procedure for pain relief.

  11. Design of a 7-MV Linear Transformer Driver (LTD) for down-hole flash x-ray radiography.

    SciTech Connect

    Cordova, Steve Ray; Welch, Dale Robert; Oliver, Bryan Velten; Rose, David Vincent; Johnson, David Lee; Bruner, Nichelle Lee; Leckbee, Joshua J.

    2008-09-01

    Pulsed power driven flash x-ray radiography is a valuable diagnostic for subcritical experiments at the Nevada Test Site. The existing dual-axis Cygnus system produces images using a 2.25 MV electron beam diode to produce intense x-rays from a small source. Future hydrodynamic experiments will likely use objects with higher areal mass, requiring increased x-ray dose and higher voltages while maintaining small source spot size. A linear transformer driver (LTD) is a compact pulsed power technology with applications ranging from pulsed power flash x-ray radiography to high current Z-pinch accelerators. This report describes the design of a 7-MV dual-axis system that occupies the same lab space as the Cygnus accelerators. The work builds on a design proposed in a previous report [1]. This new design provides increased diode voltage from a lower impedance accelerator to improve coupling to low impedance diodes such as the self magnetic pinch (SMP) diode. The design also improves the predicted reliability by operating at a lower charge voltage and removing components that have proven vulnerable to failure. Simulations of the new design and experimental results of the 1-MV prototype are presented.

  12. Portable Dental System

    NASA Technical Reports Server (NTRS)

    1980-01-01

    Portable dental system provides dental care in isolated communities. System includes a patient's chair and a dentist's stool, an X-ray machine and a power unit, all of which fold into compact packages. A large yellow "pumpkin" is a collapsible compressed air tank. Portable system has been used successfully in South America in out of the way communities with this back-packable system, and in American nursing homes. This product is no longer manufactured.

  13. Dental physical examination.

    PubMed

    Baker, G J

    1998-08-01

    The objectives of the equine dental physical examination are to detect and quantify oral and dental disorders, to propose and carry out their treatment, and to implement management programs. The veterinarian should be able to offer a prognosis and to detail any future treatment or management plans that may be required. These objectives should take into account the cost of these procedures, and the veterinarian should be prepared to offer a cost-benefit analysis of the problem and the proposed cures.

  14. Dental considerations in anaesthesia

    PubMed Central

    2016-01-01

    Dental trauma as a result of anaesthesia practice is a relevant issue concerning morbidity and litigation. The investigator aimed to consolidate pertinent information on this issue to aid in the redressal of such an occurrence. A review of this relevant literature alongwith the author’s suggestions towards the management of the various kinds of dental trauma sustained as a result of anaesthesia practice is presented. PMID:27974970

  15. TRICARE Dental Programs

    DTIC Science & Technology

    2011-01-01

    enrollee – $1,500 lifetime maximum for orthodontics – Contractor: Delta Dental of California 2011 MHS Conference TRICARE Retiree Dental Program...Benefits Comprehensive benefits 12-month waiting period for crowns, prosthetics and orthodontics No waiting period if enroll within 120 days of...retiring from active duty or transfer to Retired Reserve status from National Guard or Reserve  Orthodontics for children and adults Accident coverage

  16. Dental arch asymmetry

    PubMed Central

    Al-Zubair, Nabil Muhsen

    2014-01-01

    Objective: This study was conducted to assess the dental arch asymmetry in a Yemeni sample aged (18-25) years. Materials and Methods: The investigation involved clinical examination of 1479 adults; only 253 (129 females, 124 males) out of the total sample were selected to fulfill the criteria for the study sample. Study models were constructed and evaluated to measure mandibular arch dimensions. Three linear distances were utilized on each side on the dental arch: Incisal-canine distance, canine-molar distance and incisal-molar distance, which represent the dental arch segmental measurements. Results: When applying “t-test” at P < 0.05, no significant differences were found between the right and left canine-molar, incisal-canine and incisal-molar distances in both dental arches for both sexes. The greater variation (0.30 mm) was observed between right and left canine-molar distance in the maxillary dental arch in male and the smaller (0.04 mm) in the mandibular dental arch between the right and left canine-molar distance in females. Conclusion: The findings of the present study revealed a symmetrical pattern of dental arches, since the right and left sides showed no statistically significant difference. In general, it can be observed that the measurements related to the central incisors and canines have the widest range of reading and give the impression that the location of central incisor and canines to each other and to other teeth is the strongest factor in determining the dental arch asymmetry. PMID:24966774

  17. Methodology for digital radiography simulation using the Monte Carlo code MCNPX for industrial applications.

    PubMed

    Souza, E M; Correa, S C A; Silva, A X; Lopes, R T; Oliveira, D F

    2008-05-01

    This work presents a methodology for digital radiography simulation for industrial applications using the MCNPX radiography tally. In order to perform the simulation, the energy-dependent response of a BaFBr imaging plate detector was modeled and introduced in the MCNPX radiography tally input. In addition, a post-processing program was used to convert the MCNPX radiography tally output into 16-bit digital images. Simulated and experimental images of a steel pipe containing corrosion alveoli and stress corrosion cracking were compared, and the results showed good agreement between both images.

  18. Saliva and dental erosion

    PubMed Central

    BUZALAF, Marília Afonso Rabelo; HANNAS, Angélicas Reis; KATO, Melissa Thiemi

    2012-01-01

    Dental erosion is a multifactorial condition. The consideration of chemical, biological and behavioral factors is fundamental for its prevention and therapy. Among the biological factors, saliva is one of the most important parameters in the protection against erosive wear. Objective This review discusses the role of salivary factors on the development of dental erosion. Material and Methods A search was undertaken on MEDLINE website for papers from 1969 to 2010. The keywords used in the research were "saliva", "acquired pellicle", "salivary flow", "salivary buffering capacity" and "dental erosion". Inclusion of studies, data extraction and quality assessment were undertaken independently and in duplicate by two members of the review team. Disagreements were solved by discussion and consensus or by a third party. Results Several characteristics and properties of saliva play an important role in dental erosion. Salivary clearance gradually eliminates the acids through swallowing and saliva presents buffering capacity causing neutralization and buffering of dietary acids. Salivary flow allows dilution of the acids. In addition, saliva is supersaturated with respect to tooth mineral, providing calcium, phosphate and fluoride necessary for remineralization after an erosive challenge. Furthermore, many proteins present in saliva and acquired pellicle play an important role in dental erosion. Conclusions Saliva is the most important biological factor affecting the progression of dental erosion. Knowledge of its components and properties involved in this protective role can drive the development of preventive measures targeting to enhance its known beneficial effects. PMID:23138733

  19. Liner Stability Experiments at Pegasus: Diagnostics and Experimental Results

    SciTech Connect

    Clark, D.A.; Morgan, D.V.; Rodriguez, G.

    1998-10-18

    A series of experiments to compare imploding liner performance with magneto-hydrodynamic (MHD) modeling has been performed at the Los Alamos National Laboratory Pegasus II pulse power machine. Liner instability growth originating from initial perturbations machined into the liner has been observed with high resolution. Three major diagnostics were used: radiography, Velocity Interferometer for a Surface of Any Reflector (VISAR), and fiber optic impact pins. For radiography, three flash x-ray units were mounted radially to observe liner shape at three different times during the implosion. Liner velocity was measured continuously with the VISAR for the entire distance traveled in two experiments. Optical impact pins provide a high-resolution measure of liner symmetry and shape near the end of travel. Liner performance has compared well with predictions.

  20. Influence of dental materials on dental MRI

    PubMed Central

    Tymofiyeva, O; Vaegler, S; Rottner, K; Boldt, J; Hopfgartner, AJ; Proff, PC; Richter, E-J; Jakob, PM

    2013-01-01

    Objectives: To investigate the potential influence of standard dental materials on dental MRI (dMRI) by estimating the magnetic susceptibility with the help of the MRI-based geometric distortion method and to classify the materials from the standpoint of dMRI. Methods: A series of standard dental materials was studied on a 1.5 T MRI system using spin echo and gradient echo pulse sequences and their magnetic susceptibility was estimated using the geometric method. Measurements on samples of dental materials were supported by in vivo examples obtained in dedicated dMRI procedures. Results: The tested materials showed a range of distortion degrees. The following materials were classified as fully compatible materials that can be present even in the tooth of interest: the resin-based sealer AH Plus® (Dentsply, Maillefer, Germany), glass ionomer cement, gutta-percha, zirconium dioxide and composites from one of the tested manufacturers. Interestingly, composites provided by the other manufacturer caused relatively strong distortions and were therefore classified as compatible I, along with amalgam, gold alloy, gold–ceramic crowns, titanium alloy and NiTi orthodontic wires. Materials, the magnetic susceptibility of which differed from that of water by more than 200 ppm, were classified as non-compatible materials that should not be present in the patient’s mouth for any dMRI applications. They included stainless steel orthodontic appliances and CoCr. Conclusions: A classification of the materials that complies with the standard grouping of materials according to their magnetic susceptibility was proposed and adopted for the purposes of dMRI. The proposed classification can serve as a guideline in future dMRI research. PMID:23610088