Science.gov

Sample records for die basis der

  1. Die molekulare Basis der Heterogenität der Phenylketonurie

    NASA Astrophysics Data System (ADS)

    Bartholomé, K.

    1980-10-01

    The heterogeneity of phenylketonuria can be explained on the molecular basis. Because the phenylalanine-hydroxylating system consists of more than one enzyme, each enzyme can be mutated. Different mutations of the phenylalanine hydroxylase molecule resulting in a lack or reduction of enzyme activity can be anticipated. Enzyme activity lower than 1 % compared to normals is correlated to the severe form; enzyme activity higher than 5% is correlated to the mild form of the disease. Phenylketonuria can also be caused by a defective synthesis or defective reduction of the cofactor. Patients suffer severe neurological symptoms, because of an impaired synthesis of dopamine and serotonin.

  2. Die Kosmologie der Griechen.

    NASA Astrophysics Data System (ADS)

    Mittelstraß, J.

    Contents: 1. Mythische Eier. 2. Thales-Welten. 3. "Alles ist voller Götter". 4. Griechische Astronomie. 5. "Rettung der Phänomene". 6. Aristotelische Kosmololgie. 7. Aristoteles-Welt und Platon-Welt. 8. Noch einmal: die Göttlichkeit der Welt. 9. Griechischer Idealismus.

  3. Die Arbeitsunfähigkeit in der Statistik der GKV

    NASA Astrophysics Data System (ADS)

    Busch, Klaus

    Der vorliegende Beitrag gibt anhand der Statistiken des Bundesministeriums für Gesundheit (BMG) einen Überblick über die Arbeitsunfähigkeitsdaten der Gesetzlichen Krankenkassen (GKV). Zunächst werden die Arbeitsunfähigkeitsstatistiken der Krankenkassen und die Erfassung der Arbeitsunfähigkeit erläutert. Hiernach wird auf die Entwicklung der Fehlzeiten auf GKV-Ebene eingegangen. Ebenfalls wird Bezug auf die Unterschiede der Fehlzeiten zwischen den verschiedenen Kassen genommen.

  4. Die Evolution der Religiosität

    NASA Astrophysics Data System (ADS)

    Voland, Eckart

    Ein konsequent darwinischer Blick auf den Menschen bedeutet, auch im Denken, Fühlen und Handeln biologische Anpassungsgeschichte zu suchen, denn auch die psychischen und mentalen Eigenheiten des Homo sapiens unterliegen der natürlichen Selektion. Lässt sich die religiöse Lebenspraxis von Menschen daher auch aus einer Fitnessperspektive betrachten?

  5. Darwin, Engels und die Rolle der Arbeit in der biologischen und kulturellen Evolution des Menschen

    NASA Astrophysics Data System (ADS)

    Reichholf, Josef H.

    Im Jahre 1876, 5 Jahre nach Erscheinen von Darwins Buch über die Evolution des Menschen und die sexuelle Selektion (Darwin 1871), veröffentlichte Friedrich Engels den berühmt gewordenen Essay "Anteil der Arbeit an der Menschwerdung des Affen“ (Engels 1876). Die Kernfrage darin lautet in Kurzform: Warum hat der Mensch eigentlich ein Bedürfnis nach Arbeit? Engels Antwort wird nachfolgend näher betrachtet und vom gegenwärtigen Kenntnisstand aus beurteilt. Wie sich zeigen wird, beantworten seine Überlegungen die Frage nicht wirklich. Sie ist weiterhin offen. Es können lediglich einige zusätzliche Anhaltspunkte zur Diskussion gestellt werden. Angesichts des drängenden Problems millionenfacher Arbeitslosigkeit und der Forderungen nach einem "Grundrecht auf Arbeit“ kommt den Überlegungen zum möglichen Ursprung des Bedürfnisses nach Arbeit mehr als nur akademisches Interesse zu.

  6. Herschel und die Zukunft der Fern-Infrarot-Astronomie

    NASA Astrophysics Data System (ADS)

    Linz, Hendrik

    2015-06-01

    Schon lange ist die beobachtende Astronomie den engen Grenzen des optisch Sichbaren entwachsen und hat fast alle Bereiche des elektromagnetischen Spektrums für sich dienstbar gemacht. Im sogenannten nahen und mittleren Infrarot (Wellenlängen zwischen 1-30 μm) sowie im Millimeter- und Radio-Regime (Wellenlängen zwischen 1 mm und 10 m) ist die Erdatmosphäre relativ gut durchlässig für elektromagnetische Signale oder hat zumindest eine Vielzahl von spektral begrenzten Transmissionsfenstern, die astronomische Beobachtungen zumindest von höheren Bergen aus möglich machen. Allerdings ist das sogenannte Ferne Infrarot (FIR, 30-300 μm Wellenlänge) von der Erde aus fast völlig unzugänglich für astronomische Beobachtungen. Selbst für die besten Beobachtungsplätze der Erde bleibt die atmosphärische Transmission durch die immense Wasserdampf- Absorption auf ein absolutes Minimum beschränkt. Jedoch erlaubt uns das FIR Zugang zu Informationen, die sehr nützlich sind für die astrophysikalische Forschung und komplementär zu anderen Wellenlängen-Bereichen.

  7. Die Deutsche Statistische Gesellschaft in der Weimarer Republik und während der Nazidiktatur

    NASA Astrophysics Data System (ADS)

    Wilke, Jürgen

    Nach anfänglichen Schwierigkeiten durch den 1. Weltkrieg erlangte die Deutsche Statistische Gesellschaft (DStatG) unter dem renommierten Statistiker und Vorsitzenden der DStatG, Friedrich Zahn, durch eine Vielzahl von Aktivitäten hohes Ansehen. Es gab Bestrebungen, Statistiker aus allen Arbeitsfeldern der Statistik in die DStatG zu integrieren, wobei die "Mathematische Statistik" nur zögerlich akzeptiert wurde (Konjunkturforschung, Zeitreihenanalyse). Nach der Machtübernahme 1933 durch Adolf Hitler geriet die DStatG in das Fahrwasser nationalsozialistischer Ideologie und Politik (Führerprinzip, Gleichschaltung des Vereinswesens). Damit war eine personelle Umstrukturierung in der DStatG verbunden. Politisch Missliebige und rassisch Verfolgte mussten die DStatG verlassen (Bernstein, Freudenberg, Gumbel u.a.). Unter den Statistikern gab es alle Abstufungen im Verhalten zum Regime von Ablehnung und zwangsweiser Anpassung über bereitwilliges Mitläufertum bis zu bewusster Täterschaft. Besonders die Bevölkerungsstatistik wurde durch die NS- Rassenpolitik auf lange Sicht diskreditiert. Im Rahmen von Wirtschaftsplanung und Aufrüstung wurden neue zukunftsträchtige statistische Modelle (Grünig, Bramstedt, Leisse) entwickelt.

  8. Der Physik-Nobelpreis vor 100 Jahren Die Entdeckung des trägen Gases

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2004-11-01

    Im Jahr 1904 erhielt der britische Physiker Lord Rayleigh (John William Strutt, 1842 bis 1919) den Nobelpreis für seine Untersuchungen über die Dichte von Gasen und die Entdeckung des Edelgases Argon.

  9. Die Anfaenge der Melker Bibliothek - Neue Erkenntnisse zu Handschriften und Fragmenten aus der Zeit vor 1200

    NASA Astrophysics Data System (ADS)

    Glaßner, Christine; Haidinger, Alois

    1996-04-01

    Shortly after Benedictine monks started monastic life in Melk in 1089 the scriptorium was flourishing under abbot Erchenfried (1121-1164). Noteworthy is Cod. 391, a manuscript written in its main part in 1123, but used by the monks as a yearbook with handwritten entries up to the 16th century. This manuscript was also an important source for the publication which dealt with the history of the scriptorium in 12th century. By examining the entries in this book the period of the activity of at least three unknwon writers in this era could be identified. It was the first time that not only the intact volumes but also the manuscripts preserved as fragments in the binding were examined. At the beginning of th 13th century the number of books held in the collection according to the result of this examination was 68. Another remarkable point of the exhibition and of the publication refering to the exhibition was Cod. 412, the oldest manuscript of the monastery, written in early 9th century and containing texts on natural sciences and astronomy by Venerable Bede. Three copies of this manuscript were done during 12th century, one of them probably in Melk, all of them with nearly identical consistency except the catalogue of signs of the zodiac which was ascribed erroneously to Venerable Bede in the Middle Ages: Vatican, Cod. Vat. lat. 643, Zwettl, Cod. 296 (copy of the Vatican manuscript), Klosterneuburg, Cod. 685 (copy of the Zwettl manuscript done in Klosterneuburg). Kurz nach Einführung der Benediktiner in Melk im Jahr 1089 erlebte das Melker Skriptorium unter Abt Erchenfried (1121-1163) seine erste Blüte. Hervorzuheben ist eine im Jahr 1123 angelegte Chronik, die bis in das 16. Jahrhundert durch Annaleneintragungen und andere wichtige Texte zur Geschichte des Klosters ergänzt wurde (Cod. 391). Diese Handschrift ist zugleich eine der wichtigsten Quellen zur Geschichte des Melker Skriptoriums im 12. Jahrhundert, dem sich die Publikation widmet. Mit Hilfe einer genaueren

  10. Online Condition Monitoring mit der Stresswellenanalyse

    NASA Astrophysics Data System (ADS)

    Bruderreck, Frank

    Die Anforderungen des heutigen Energiemarkts und damit einhergehende veränderte Einsatzbedingungen für ältere Kraftwerksblöcke haben unvorhergesehene Produktionsausfälle in den letzten Jahren erheblich verteuert. Nach der Optimierung der Kraftwerksprozesse und der Steigerung der Wirkungsgrade richten die Energieversorger ihren Blick daher nun verstärkt auch auf die Verfügbarkeit ihrer Anlagen. Zur Verbesserung der Anlagenverfügbarkeit und der Minimierung der Instandhaltungskosten bietet sich der Einsatz von Condition Monitoring Systemen an. Nach der Erprobung eines Systems zur Vibrationsanalyse setzt die Evonik Steag GmbH jetzt in einem Pilotprojekt die Stresswellenanalyse ein, ein Online Condition Monitoring System auf der Basis von Ultraschallsensoren. Dieser Beitrag erläutert an einem Beispiel die Methode und grenzt sie gegen den De-facto-Standard Vibrationsanalyse ab.

  11. Sitzungsberichte der Heidelberger Akademie der Wissenschaften> " Jahrgang 1990 Sitzungsber.Heidelberg 90 " "Gott hat die Natur einfältig gemacht, sie aber suchen viel Künste"

    NASA Astrophysics Data System (ADS)

    Zehe, Horst

    Der Aufsatz demonstriert anhand ausgiebig kommentierter zeitgenössischer Zeugnisse Goethes Reaktion auf die Arbeiten Fraunhofers, insbesondere auf die Entdeckung der dunklen Linien im Sonnenspektrum. Den Fehlurteilen Goethes werden dabei die Urteile zeitgenössischer Physiker wie Chladni und J.F.W. Herschel gegenübergestellt. Bislang noch ungedruckte Dokumente aus dem Weimarer Goethe- und Schiller-Archiv belegen, daß sich Goethe nicht nur literarisch mit Fraunhofer beschäftigte, sondern daß er auch dessen Versuche mit Hilfe des Jenaer Universitätsmechanikers Körner getreulich zu wiederholen suchte.

  12. Gesellschaft, Lebensgemeinschaft, Ökosystem - Über die Kongruenz von politischen und ökologischen Theorien der Entwicklung

    NASA Astrophysics Data System (ADS)

    Voigt, Annette

    Im Jahr 1859 veröffentlichte Charles Darwin "On the Origin of Species“. Seine Evolutionstheorie ist das wohl spektakulärste Beispiel einer naturwissenschaftlichen Theorie großer gesellschaftlicher Relevanz. Ihre verschiedenen Facetten wurden in der Öffentlichkeit kontrovers diskutiert, unter anderem auch ihre Anwendung zur Erklärung von Zuständen und Prozessen menschlicher Gesellschaften. Zum Teil wurde die Seiensweise der Natur - scheinbar unabhängig von gesellschaftlichen Interessen - für die Erklärung und Legitimation gesellschaftlicher Zustände oder die Legitimation von politischen Ideologien herangezogen (Sozialdarwinismus). Denn Gesellschaft funktioniere ja so, wie Darwin die Natur erklärt habe: es herrsche z. B. Konkurrenzkampf, Auslese und Arbeitsteilung, Erfolg hätten diejenigen, die sich an die Bedingungen am Besten anpassten.

  13. Wirkungen biogener Amine auf die Erregungs-Sekretions-Kopplung in der Speicheldrüse von Periplaneta americana (L.)

    NASA Astrophysics Data System (ADS)

    Rietdorf, Katja

    2003-07-01

    In der vorliegenden Arbeit habe ich wichtige Teilmechanismen der Erregungs-Sekretionskopplung in der Speicheldrüse der Schabe Periplaneta americana (L.) untersucht. Die Speicheldrüse ist von dopaminergen und serotonergen Fasern innerviert (Baumann et al., 2002). Beide Transmitter stimulieren eine unterschiedliche Reaktion der Drüse: Dopamin (DA) stimuliert die P-Zellen der Acini und die Ausführgangzellen, während Serotonin (5-HT) die P- und C-Zellen der Acini stimuliert, nicht jedoch die Ausführgangzellen. Der Endspeichel ist nach einer DA-Stimulierung proteinfrei. Dagegen enthält er nach einer 5-HT-Stimulierung Proteine, die von den C-Zellen sezerniert werden (Just & Walz, 1996). Im ersten Teil meiner Arbeit habe ich mittels Kapillarelektrophoretischer Analyse (CE-Analyse) die Elektrolytkonzentrationen im Endspeichel untersucht sowie die Raten der Flüssigkeitssekretion gemessen. Damit wollte ich klären, welche Transporter an der Sekretion des Primärspeichels und an dessen Modifikation beteiligt sind. Ausserdem wollte ich die Rolle der transportaktiven Epithelzellen der Ausführgänge für die Modifikation des Primärspeichels untersuchen. Dafür habe ich einen Vergleich der Elektrolytkonzentrationen im DA- und 5-HT-stimulierten Endspeichel durchgeführt. Der Elektrolytgehalt des DA- und 5-HT-stimulierten Endspeichels unterscheidet sich nicht signifikant voneinander. Er ist nach beiden Stimulierungen hypoosmotisch zum verwendeten Ringer. Die Ausführgangzellen werden durch DA stimuliert und modifizieren den Primärspeichel durch eine netto-Ionenreabsorption. Meine Versuche zeigen jedoch, dass auch die während einer 5-HT-Stimulierung der Drüse unstimulierten Ausführgangzellen den Primärspeichel modifizieren. In einer nachfolgenden Versuchsreihe habe ich den Einfluss von Ouabain, einem Hemmstoff der Na+-K+-ATPase, und Bumetanid, einem Hemmstoff des NKCC, auf die Raten der Flüssigkeitssekretion sowie den Elektrolytgehalt des Endspeichels untersucht. Ich

  14. Die Pugwash Conferences on Science and World Affairs Ein Beispiel für erfolgreiche „Track-II-Diplomacy“ der Naturwissenschaftler im Kalten Krieg

    NASA Astrophysics Data System (ADS)

    Neuneck, Götz

    "Kein Zeitalter der Geschichte ist stärker von den Naturwissenschaften durchdrungen und abhängiger von ihnen als das 20. Jahrhundert" schreibt Eric Hobsbawn im Kapitel "Zauberer und Lehrlinge: Die Naturwissenschaften" seines Buches "Zeitalter der Extreme".

  15. Schlüsselkomponenten für Roboter in der Produktion Roboterhaut und Sicherheitskonzept für die Mensch-Roboter Kooperation

    NASA Astrophysics Data System (ADS)

    Denkena, B.; Hesse, P.; Friederichs, J.; Wedler, A.

    Vorgestellt wird der Aufbau einer aktiven Sensor-Matrix zur Abstands- und Kontaktdetektion in der Robotik. Diese besteht aus einem Sensornetzwerk zur Fusion und Überlagerung differenter physikalischer Wirkprinzipien. Die Sicherheit der I2C-Bus Kommunikation, der Aufbau der Roboterhaut, Ergebnisse der Abstandsdetektion mit Infrarot-, und Ultraschallsensorik werden dargestellt. Ferner wurden Temperatur-, und Beschleunigungssensoren auf die Oberfläche der Roboterhaut aufgebracht um Informationen über die Umgebung sicher an ein übergeordnetes Leitsystem zu übertragen. Eine unterlagerte sichere Roboterhaut mit Kontaktdetektion zeigt als einfache Schlüsselkomponente ein analoges Ausschaltverhalten für geringe Latenzzeiten. Als Schluss wird auf den Einsatz an einem Industrieroboter in der Produktion ohne trennende Schutzeinrichtungen (OTS) eingegangen.

  16. Regionale Meeresschutzkooperation und die EU-Gratwanderung der Helsinki-Kommission imOsterweiterungsprozess der EU

    NASA Astrophysics Data System (ADS)

    Imhoff, Heike

    1999-12-01

    The purpose of the lecture is to describe the role of regional marine protection cooperation in the context of international cooperation. My intention is to provide evidence that regional forms of cooperation are an indispensable instrument, in particular against the backdrop of the EU enlargement to the east. Signed at times when the iron curtain still existed, the Baltic Marine Environment Protection Convention was the basis of a first reluctant cooperation between Western and Eastem states bordering on the Baltic Sea. As a result of the fall of the iron curtain and of the accession of Finland and Sweden to the European Union there was a shift in the political structure of the Baltic Sea cooperation. 4 EU member states are represented in the Helsinki Commission. As there is a total of 10 Parties (one of them the Commission of the European Communities) this means that EU countries currently already make up 50% of the Commission. The regulatory instruments of the Helsinki Commission (legally non-binding, yet politically appellative recommendations) and of the EU (directives, regulations etc. which are binding by international law) make it clear that there are serious differences. From the point of view of regional marine protection cooperation, the EC Commission’s involvement in issues of regional marine protection has been linked to both advantages and disadvantages. The pressure created by the EC’s involvement in certain issues can be considered an advantage, since it requires that certain issues are continually addressed in the framework of regional marine protection cooperation. For example, in the wake of the adoption of the nitrates directive special rules were established in the framework of the Helsinki Commission. However, the exclusive competence for individual areas (e.g. fisheries) claimed by the EC Commission sometimes has negative effects. Those member states of the Helsinki Commission which are also EU member states may formally only accept rules

  17. „Überholen ohne einzuholen“ Die Entwicklung von Technologien für übermorgen in Kernenergie und Mikroelektronik der DDR

    NASA Astrophysics Data System (ADS)

    Barkleit, Gerhard

    Dem nuklearen Patt zwischen Ostblock und westlichem Staatenbündnis ist es nach weitgehend übereinstimmender Auffassung von Politik und Wissenschaft zu danken, dass der "Kalte Krieg" in der zweiten Hälfte des 20. Jahrhunderts nicht zum weltumfassenden Flächenbrand eskalierte. An der raschen Herstellung dieses Patts waren zwei Dresdner Physiker maßgeblich beteiligt, deren einer im Manhattan-Projekt in den USA gearbeitet hatte und später in England der Spionage für die Sowjetunion und des Verrats des Know-how der Atombombe überführt wurde.

  18. Wege in die Zukunft

    NASA Astrophysics Data System (ADS)

    Kauermann, Göran; Mosler, Karl

    Die Zukunft stellt große Herausforderungen an die Arbeit der Deutschen Statistischen Gesellschaft. Sie betreffen die gestiegenen Anforderungen der Nutzer von Statistik, die Kommunikationsmöglichkeiten des Internets sowie die Dynamik der statistischen Wissenschaften und ihrer Anwendungsgebiete. Das Kapitel 5 beschreibt, wie sich die Gesellschaft diesen Herausforderungen stellt und welche Ziele sie sich in der wissenschaftlichen Zusammenarbeit und im Kampf gegen das Innumeratentum gesetzt hat.

  19. Sitzungsberichte der Heidelberger Akademie der Wissenschaften¬Jahrgang 1990 Sitzungsber.Heidelberg 90¬"Gott hat die Natur einfältig gemacht, sie aber suchen viel Künste"

    NASA Astrophysics Data System (ADS)

    Zehe, Horst

    Der Aufsatz demonstriert anhand ausgiebig kommentierter zeitgenössischer Zeugnisse Goethes Reaktion auf die Arbeiten Fraunhofers, insbesondere auf die Entdeckung der dunklen Linien im Sonnenspektrum. Den Fehlurteilen Goethes werden dabei die Urteile zeitgenössischer Physiker wie Chladni und J.F.W. Herschel gegenübergestellt. Bislang noch ungedruckte Dokumente aus dem Weimarer Goethe- und Schiller-Archiv belegen, daß sich Goethe nicht nur literarisch mit Fraunhofer beschäftigte, sondern daß er auch dessen Versuche mit Hilfe des Jenaer Universitätsmechanikers Körner getreulich zu wiederholen suchte.

  20. Matthias Falter und die frühe Halbleitertechnik in der DDR

    NASA Astrophysics Data System (ADS)

    Dittmann, Frank

    Nach einer ganzen Reihe von Vorarbeiten weltweit1 konnten im Dezember 1947 die amerikanischen Physiker Walter H. Brattain, John Bardeen und William Shockley in den Bell Laboratories den Transistoreffekt demonstrieren. Damit legten sie den Grundstein für die Mikroelektronik als Basistechnologie des Informationszeitalters.

  1. [Mathematics, natural sciences and technology--parts of the encyclopedia Die Kultur der Gegenwart (The culture of today)].

    PubMed

    Tobies, Renate

    2008-03-01

    The paper explores the trend of the early 20th century to consolidate mathematics, natural sciences, medicine and technology under the umbrella of one integrative culture--a tendency which contrasts with the increasing mainstream trend of separating the humanities from the natural sciences. The unifying umbrella was framed by the great encyclopedia Die Kultur der Gegenwart which was published by B. G. Teubner from 1905 to 1925 and was planned to run up to 62 volumes. We analyze the quantitative rate of the parts devoted to the humanities, the natural sciences and technology, respectively, the degree to which these parts were completed in this encyclopedia. In particular, we investigate the role of mathematicians and their reasons to find a classification for the mathematical, natural scientific and engineering parts of culture as well as their reasons, to win Nobel prize winners and other famous scientists to become co-editors and authors. We examine the published volumes in the fields of mathematics, chemistry, physics, astronomy and technology in order to show what type of publication--professional or popular--was intended. Furthermore, we illuminate how the educational reform of mathematics, natural sciences and technology of this period--which included a reform of girls' and women's education--was reflected in the encyclopedia Die Kultur der Gegenwart.

  2. Die Milchstraße.

    NASA Astrophysics Data System (ADS)

    Henbest, N.; Couper, H.

    This book is a German translation, by M. Röser, from the English original "The guide to the Galaxy", published in 1994 (see Abstr. 61.003.065). Contents: 1. Die Entdeckung unserer Galaxis. 2. Die Lokale Gruppe. 3. Die Geographie der Galaxis. 4. Der Perseus-Arm. 5. Der Orion-Arm. 6. Unsere lokale Nachbarschaft: ein typischer Winkel der Galaxis. 7. Der Sagittarius-Arm: innerhalb der Sonnenumlaufbahn. 8. Das Zentrum der Galaxis.

  3. BOOK REVIEW: Astronomie und Anschaulichkeit. Die Bilder der populaeren Astronomie des 19. Jahrhunderts

    NASA Astrophysics Data System (ADS)

    Duerbeck, H. W.; Utzt, S.

    2004-12-01

    Today, popularisation of science also means "pretty pictures": images that accompany articles in magazines and webpages, or are squeezed between the covers of so-called coffee-table books, and the reviewer pleads guilty to having added to this growing pile. But how did this "disease" came into existence? Susanne Utzt, a manager, journalist and student in the history of sciences, has dedicated her master thesis to the investigation of the growing influence of such pictures in the popularisation of astronomy. She has analyzed French and German popular texts by Arago, Guillemin, Flammarion, as well as Littrow, Maedler and Max Wilhelm Meyer that mainly appeared in the second half of the 19th century. Earlier astronomy books just had a few foldout pages with mathematical figures, as the author exemplifies by Littrow's first edition of "Die Wunder des Himmels" of 1834-36. But Flammarion with his "Astronomie Populaire", changed everything: 51 "art pages" and more than 300 figures in the text made it a true picture book, and about a third of Utzt's work is dedicated to its analysis. (In passing, it should be noted that the first 1880 edition of Flammarion's book did not yet contain the "art pages"; the author quotes such pages and text figures according to a German edition of 1907). Besides sober diagrams illustrating the solar system, and telescope drawings showing planetary surfaces and the structure of the solar photosphere, Flammarion includes poetic illustrations like a couple at the seashore at sunset; a scene showing dying Copernicus, already flanked by two angels, as he receives a copy of his De Revolutionibus; or a painting showing a flock of mammoths in an ancient landscape. In most cases, the images are chosen to illustrate the text, but sometimes the text "makes a detour" to permit the inclusion of a pretty picture. Flammarion's book contains drawings illustrating the sphericity of the earth, which appeared in almost identical form in Apian's Cosmography of

  4. elecTUM: Umsetzung der eLearning-Strategie der Technischen Universität München

    NASA Astrophysics Data System (ADS)

    Rathmayer, Sabine; Gergintchev, Ivan

    An der TUM wurde ein umfassendes und integriertes eLearning-Konzept umgesetzt, welches Präsenzstudium und eLearning in allen Leistungsbereichen der Universität miteinander verzahnt. Ein besonderer Schwerpunkt lag dabei in der Schaffung einer effizienten und wettbewerbsfähigen integrierten eLearning Infrastruktur in Hinblick auf die noch weiter steigenden Studienanfängerzahlen ab dem Jahr 2011 sowie die Umsetzung von eBologna. Die Etablierung einer hochschulweiten Lernplattform stellte eine wesentliche Basis für die Umsetzung der eLearning-Strategie dar. Die wissenschaftliche und wirtschaftliche Anschlussfähigkeit im Hinblick auf eine Verwertung der Projektergebnisse wurde durch die aktive Beteiligung an einer Vielzahl hochschulübergreifender Arbeitskreise, Fachtagungen und Kooperationen, vor allem über Organisations- und Dienstleistungsmodelle sowie innovative technische Entwicklungen, sichergestellt.

  5. Herausforderungen durch die deutsche Wiedervereinigung

    NASA Astrophysics Data System (ADS)

    Stäglin, Reiner

    Die Wiedervereinigung stellte auch die Statistik vor große Aufgaben. Die als Organ der staatlichen Planung staatsnah orientierte Statistik der DDR musste auf das zur Neutralität und wissenschaftlichen Unabhängigkeit verpflichtete System der Bundesrepublik umgestellt werden. Ebenso verlangten die Universitäten eine Neuorientierung. Die Deutsche Statistische Gesellschaft hat sich vor allem dreier Aufgaben mit großem Engagement, aber auch mit Bedachtsamkeit angenommen: Aufnahme und Integration der Statistiker aus den neuen Bundesländern in die Gesellschaft, Begleitung der Neuausrichtung des Faches Statistik an deren Hochschulen und Sicherung sowie Nutzung von Datenbeständen der ehemaligen DDR.

  6. Full CI calibration of model hamiltonian, large basis set studies of the H 2-H 2 van der Waals interaction.

    NASA Astrophysics Data System (ADS)

    Burton, P. G.

    1983-08-01

    The non-variational CEPA2 PNO ansatz, recently employed in detailed studies of the H 2-H 2 van der Waals interaction by Burton and Senff and the full CI extrapolation studies on the same system by Burton are discussed in relation to the explicit full CI study of Harrison and Handy for the planar T configuration of H 2-H 2 ( R = 6.5 ao) in a basis of 80 functions.

  7. Umsetzung der Unternehmensstrategie mit der Balanced Scorecard

    NASA Astrophysics Data System (ADS)

    Crespo, Isabel; Bergmann, Lars; Portmann, Stefan; Lacker, Thomas; Lacker, Michael; Fleischmann, Jürgen; Kozó, Hans

    Die Balanced Scorecard (BSC) ist ein Ansatz zum strategischen Management, der neben der Ausrichtung des Unternehmens auf finanzielle Zielwerte ebenso großes Gewicht auf so genannte weiche Faktoren legt, die den wirtschaftlichen Erfolg eines Unternehmens erst ermöglichen. Das entscheidende Merkmal der Balanced Scorecard ist dabei, dass sie ein ausgewogenes System strategischer Ziele herstellt, welches das Unternehmen hinsichtlich der vier Perspektiven Finanzen, Kunden, interne Prozesse und Mitarbeiter und Potenziale strategisch ausrichtet (Kaplan u. Norton 1997).

  8. Akustikgestaltung in der Fahrzeugentwicklung

    NASA Astrophysics Data System (ADS)

    Pletschen, Bernd

    Die zielgerichtete Entwicklung der Fahrzeugakustik stellt eine hochkomplexe, integrative Aufgabenstellung im Rahmen der Fahrkomfortgestaltung des Automobils dar. Die Wahrnehmung der Komforteigenschaften eines Fahrzeugs erfolgt grundsätzlich als Wahrnehmung der Wirkung dieser Eigenschaften über einen oder mehrere Wahrnehmungskanäle des Menschen: visuell, auditiv, haptisch, olfaktorisch. Die individuelle Wahrnehmung ist hierbei subjektiv und daher mit rein physikalisch objektiven Messgrößen allein nur unvollständig zu beschreiben. Sie hängt einerseits von den Eigenschaften des betrachteten Fahrzeugs oder einer erlebten Situation ab und andererseits außerdem von der Sozialisation des Bewertenden und der Umgebung, in der die Bewertung stattfindet (Wikipedia). Der Fahrkomfort, den ein Fahrzeug Fahrer und Beifahrern bietet, wird also wegen unterschiedlicher Erwartungen des Kunden in den verschiedenen Weltmärkten sehr unterschiedlich erlebt.

  9. Grundlagen und Vollzug der amtlichen Lebensmittelkontrolle in der Schweiz

    NASA Astrophysics Data System (ADS)

    Hübner, Philipp; Spinner, Christoph

    In der Schweiz wird die Mehrheit der hoheitlichen Aufgaben von den 26 Kantonen, die zusammen die schweizerische Eidgenossenschaft bilden, autonom vollzogen. So liegt zum Beispiel die Kompetenz in den Bereichen Steuern, Gesundheit, Schulen oder Polizei grundsätzlich bei den Kantonen. Im Gegensatz dazu ist die Lebensmittelgesetzgebung national durch eidgenössische Erlasse harmonisiert. Die Vollzugsaufgaben liegen aber auch in diesem Bereich, abgesehen vom Vollzug an der Grenze und von einer nationalen Vollzugsaufsicht und Weisungsberechtigung, in kantonaler Kompetenz. Die Kantone können anhand kantonaler Erlasse das Bundesrecht präzisieren - insbesondere die organisatorischen Aspekte - und Regelungen im nicht harmonisierten Bereich treffen.

  10. Kants Theorie der Sonne: Physikgeschichte

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2005-01-01

    Im Rahmen seiner Kosmogonie entwickelte der junge Immanuel Kant eine Theorie der Sonne. Sie ist ein einzigartiges Zeugnis seiner intuitiven Vorstellungskraft und beweist auch die Leistungsfähigkeit der damaligen, vorwiegend von Newton geprägten Weltsicht. Entstehung, Aufbau und Dynamik der Sonne werden in Kants Theorie ebenso erklärt wie etwa das Phänomen der Sonnenflecken.

  11. Evaluation der zentralen TUM-Lernplattform

    NASA Astrophysics Data System (ADS)

    Schulze, Elvira; Baume, Matthias; Graf, Stephan; Gergintchev, Ivan

    Die Notwendigkeit der Qualitätssicherung und -kontrolle für innovative universitäre Lehr-/Lernszenarien ist in der Praxis unbestritten. Die Wirksamkeit der Einführung der zentralen Lernplattform CLIX Campus der imc AG an der TUM wurde mittels quantitativer und qualitativer Evaluation überprüft. Als statistische Bewertungsgrundlage wurde der Erreichungsgrad bestimmter Projektziele herangezogen. Aufbauend auf den theoretischen Grundlagen der Evaluation von Bildungsangeboten gibt diese Studie Aufschluss über die Ergebnisse der Datenerhebungen sowie die Einschätzung der Plattform aus Nutzersicht und belegt die wesentliche Bedeutung der durchgängigen IT-Infrastruktur und speziell der einheitlichen Verfügbarkeit der eLearning Angebote.

  12. Zum Stellenwert der Unterdruck-Instillationstherapie in der Dermatologie.

    PubMed

    Müller, Cornelia Sigrid Lissi; Burgard, Barbara; Zimmerman, Monika; Vogt, Thomas; Pföhler, Claudia

    2016-08-01

    Die Methoden zur Behandlung akuter und chronischer Wunden unterliegen einer steten Weiterentwicklung, Reevaluierung und Anwendung innovativer Therapieformen. Die Vakuumtherapie zur Wundbehandlung gehört zu den etablierten Behandlungsmodalitäten. Ein innovatives Verfahren kombiniert die Vakuumtherapie mit der automatisierten, kontrollierten Zufuhr und Drainage wirkstoffhaltiger Lösungen zur topischen Wundbehandlung im Wundbett und auch wirkstofffrei durch Instillation physiologischer Kochsalzlösung (Unterdruck-Instillationstherapie). Hierdurch können die Effekte der konventionellen Vakuumtherapie mit denen der lokalen Antisepsis kombiniert werden. Hierdurch kommt es zu einer Reduktion der Wundfläche, einer Induktion von Granulationsgewebe sowie einer Reduktion der Keimbesiedelung der Wunden. Bisher publizierte Studien konzentrieren sich auf die Anwendung dieses Therapieverfahrens zur Behandlung orthopädisch-chirurgischer Krankheiten. Die Datenlage bezüglich der Vakuum-Instillationstherapie in der Dermatochirurgie beschränkt sich derzeit auf Fallberichte und Einzelfallerfahrungen. Randomisierte, prospektive Studien zum Vergleich der Vakuum-Instillationstherapie zur Behandlung dermatologischer Krankheitsbilder existieren bislang nicht. Ziele des vorliegenden Artikels sind die Vorstellung der Vakuumtherapie mit Instillation einschließlich ihres Wirkprinzips, deren mögliche Komplikationen, die Diskussion erdenklicher Kontraindikationen sowie eine Übersicht über die aktuell verfügbare Datenlage. Zusammenfassend scheint sich die Evidenz zu verdichten, dass mittels Unterdruck-Instillationstherapie sowohl einfache als auch komplizierte Wunden effizient behandelt werden können, was sich in einer deutlichen Beschleunigung der Wundgranulation mit konsekutiv früher möglichem Defektverschluss äußert.

  13. Kosmische Katastrophen und der Ursprung der Religion.

    NASA Astrophysics Data System (ADS)

    Hoyle, F.

    This book is a German translation, by V. Delavre, from the English original "The origin of the Universe and the origin of religion", published in 1993. Contents: E. Sens: Die unterbrochene Musikstunde. Einleitung zur deutschen Ausgabe. C. Ryskamp: Einführung. R. N. Anshen: Vorwort. F. Hoyle: Kosmische Katastrophen und der Ursprung der Religion - Die Folgen der Respektabilität; Eiszeiten und Kometen; Die allgemeine Situation in den Nacheiszeiten; Kometen und der Ursprung der Religionen; Der Übergang zu Mittelalter und Neuzeit. Diskussionsbeiträge: Ruth Nanda Anshen, Freeman Dyson, Paul Oscar Kristeller, John Archibald Wheeler, James Schwartz, Roger Shinn, Milton Gatch, Philip Solomon, Norman Newell. F. Hoyle: Schlußwort. A. Tollmann: Nachwort zur deutschen Ausgabe.

  14. Der II. Hauptsatz der Wärmelehre

    NASA Astrophysics Data System (ADS)

    Heintze, Joachim

    Wir haben in (4.44) den II. Hauptsatz als empirische Tatsache folgendermaßen formuliert: (i) Wärmeenergie geht von selbst nur von einem wärmeren Körper auf einen kälteren über, niemals in der umgekehrten Richtung. Nun werden wir beweisen, dass sich aus diesem Prinzip folgende äquivalente Formulierungen für den II. Hauptsatz ableiten lassen: (ii) Es ist unmöglich, ein Perpetuum mobile zweiter Art zu bauen, d. h. eine Maschine, die fortlaufend Wärmeenergie vollständig in mechanische Arbeit umsetzen kann. Eine Wärmekraftmaschine, die einen Kreisprozess mit der höchsten Temperatur Tw und der niedrigsten Temperatur Tk durchläuft, hat höchstens den Carnotschen Wirkungsgrad c = (Tw - Tk)/Tw. Wenn in der Maschine nur reversible Prozesse ablaufen, die gesamte Wärmezufuhr bei der Temperatur Tw erfolgt und ausschließlich bei der Temperatur Tw gekühlt wird, ist ihr Wirkungsgrad = C. Es gibt keine Wärmekraftmaschine, die eine bessere Ausnutzung der Wärmeenergie ermöglicht. (iv) In jedem thermodynamischen System existiert die Zustandsgröße Entropie, definiert durch ihr Differential dS = (dQrev)/T . Entropie kann erzeugt, aber nicht vernichtet werden. Bei Zustandsänderungen, die in einem abgeschlossenen System ablaufen, nimmt die Entropie entweder zu (irreversible Prozesse), oder sie bleibt konstant (reversible Prozesse). Im Anschluss an (iii) werden wir zur Definition der thermodynamischen Temperatur und bei der Diskussion von (iv) zu einem tieferen Verständnis der Entropie gelangen. Es zeigt sich, dass die Entropie das eigentliche Bindeglied zwischen Mechanik und Wärmelehre darstellt. Am Ende des Kapitels werden wir einige Anwendungen des II. Hauptsatzes betrachten.

  15. Charakterisierung von Sulfotransferasen im Gastrointestinaltrakt von Mensch und Ratte und Aktivierung von Promutagenen in V79-Zellen, die eine intestinale Form (1B1) des Menschen und der Ratte exprimieren

    NASA Astrophysics Data System (ADS)

    Teubner, Wera

    2001-05-01

    Die Ausstattung der gastrointestinalen Mukosa des Menschen und der Ratte mit Sulfotransferasen wurde mit Hilfe von Immunodetektion und Enzymaktivitätsmessungen untersucht. In Proben aus Colon und Rektum von 39 Personen wurden die Formen h1A1, h1A3 und h1B1 identifiziert, wobei in einer weiteren Probe, die als einzige von einem an Colitis Ulcerosa erkrankten Patienten stammte, keine Sulfotransferasen nachgewiesen werden konnten. Bei der Immunblot-Analyse war das Expressionsmuster der einzelnen Formen in allen Proben ähnlich. In wenigen Proben waren die relativen Signalintensitäten der h1A1 und der h1B1 um die Hälfte erniedrigt. Der Gehalt von SULT an zytosolischem Protein zeigte einen bis zu 8 - 10fachen Unterschied, er betrug jedoch bei zwei Dritteln der Proben zwischen 0,15 und 0,3 (h1A1 und h1A3) bzw. 0,6 und 0,8 Promille (h1B1). Die Variation konnte nicht auf Alter, Geschlecht oder Krankheitsbild der Patienten zurückgeführt werden. Auch der für die allelischen Varianten der h1A1 beschriebene Effekt auf die Enzymaktiviät bzw. Stabilität konnte in der Menge an immunreaktivem Protein nicht in diesem Ausma detektiert werden. Die Allelhäufigkeit von h1A1*R und h1A1*H war gegenüber der gesunden Bevölkerung nicht verändert. In den sieben Proben aus dem Dünndarm (Coecum, viermal Ileum, Jejunum) konnten zusätzlich die Formen h1E1 und h2A1 identifiziert werden. Ein möglicherweise der Form h1C1 entsprechendes Protein wurde im Magen detektiert. Im Vergleich zum Menschen war die Expression in der Ratte stärker auf die Leber konzentriert. Während beim Menschen in allen untersuchten Abschnitten Sulfotransferasen in Mengen detektiert wurden, die in zwei Fällen (h1B1 und h1A3) sogar den Gehalt in der Leber überstiegen, beschränkte sich die Expression in der Ratte auf im Vergleich zur Leber geringe Mengen im Magen und Dickdarm. Nachgewiesen wurden die r1B1, r1A1 sowie eine nicht identifizierte Form von 35kD, bei der es sich vermutlich um die r1C2 handelt. Im

  16. Verbesserung der Symmetrie von Hirnaufnahmen entlang der Sagittalebene

    NASA Astrophysics Data System (ADS)

    Ens, Konstantin; Wenzel, Fabian; Fischer, Bernd

    Die lokale Symmetrie von Hirnscans entlang der Sagittalebene zu ermitteln und zu modizifieren, ist für eine Reihe neurologischer Anwendungen interessant. Beispielsweise kann der voxelweise Vergleich von rechter und linker Hirnhälfte nur dann Aufschluss über die Lokalisierung von Läsionen geben, wenn durch Transformation ein Hirnscan eine möglichst hohe Symmetrie aufweist. Ein weiteres Anwendungsgebiet ist die Visualisierung von medialen Hirnschnitten, für die die Trennfläche beider Hirnhälfte möglichst eben sein sollte. Diese Arbeit stellt die Entwicklung eines Verfahrens vor, mit dessen Hilfe die Symmetrie von Hirnaufnahmen entlang der Sagittalebene verbessert werden kann. Dies geschieht unter Verwendung von aktiven Konturen, die mit Hilfe einer neuartigen Kostenfunktion gesteuert werden. Experimente am Ende der Arbeit mit strukturellen Kernspinaufnahmen demonstrieren die Leistungsfähigkeit des Verfahrens.

  17. Die Behandlung des Wilden Westerns auf der Mittelstufe (Treatment of the Wild West in the Intermediate Grades).

    ERIC Educational Resources Information Center

    Omasreiter, Ria

    1979-01-01

    Presents a 2- to 3-hour teaching unit dealing with conflict between Whites and Indians, taking as an example the Black Hawk War. The reports of Chief Black Hawk and of historian Billington (sources for both are given) are taken as a basis for discussion. (IFS/WGA)

  18. Die Kometenmission Rosetta

    NASA Astrophysics Data System (ADS)

    Krüger, Harald

    2016-11-01

    Die Rosetta-Mission ist ein Meilenstein in der Erforschung der Kometen und ihrer Entstehung. Eine der größten üerraschungen war die unregelmäßge hantelförmige Gestalt des Zielkometen 67P/Tschurjumow-Gerassimenko. Er besteht wahrscheinlich aus zwei Einzelkörpern, die durch ihre Schwerkraft aneinander gehalten werden. Seine Oberfläche ist sehr rau und zeigt eine sehr vielf ältige Morphologie, die auf eine Vielzahl von ablaufenden Prozessen hindeutet. Der Kometenkern ist vermutlich auf Gr ößnskalen von mehr als etwa 10 bis 100 Metern homogen, Inhomogenitäten auf kleineren Skalen k nnten f r seine Aktivä t verantwortlich sein. Diese ist auf kleine Gebiete konzentriert, und auch Oberflächenveränderungen, die sich innerhalb von einigen Tagen bis wenigen Wochen abspielen, sind lokal. Im Kometenmaterial wurde eine Vielzahl an organischen Substanzen gemessen, die zum Teil als Schlüsselmoleküle für die Synthese der Grundbausteine des Lebens gelten, wie wir es kennen.

  19. Von Humboldt bis Einstein. Berlin als Weltzentrum der exakten Wissenschaften.

    NASA Astrophysics Data System (ADS)

    Meschkowski, H.

    Contents: 1. Die Anfänge. 2. Die Ära Dirichlet-Jacobi. 3. Der Ausbau der experimentellen Naturwissenschaften. 4. Alexander von Humboldt. 5. Berlin wird "Weltzentrum" der Mathematik. 6. Die Ära Helmholtz. 7. Neue Arbeitsweisen der Astronomie. 8. Chemie: Forschung und Industrie. 9. Max Planck. 10. Ins technische Zeitalter. 11. Zur Mathematik der zwanziger Jahre. 12. Albert Einstein. 13. Fortschritte der Grundlagenforschung. 14. Erwin Schrödinger: Physiker, Philosoph und Poet. 15. Zum Schluß.

  20. Use of Two-Body Correlated Basis Functions with van der Waals Interaction to Study the Shape-Independent Approximation for a Large Number of Trapped Interacting Bosons

    NASA Astrophysics Data System (ADS)

    Lekala, M. L.; Chakrabarti, B.; Das, T. K.; Rampho, G. J.; Sofianos, S. A.; Adam, R. M.; Haldar, S. K.

    2017-01-01

    We study the ground-state and the low-lying excitations of a trapped Bose gas in an isotropic harmonic potential for very small (˜ 3) to very large (˜ 10^7 ) particle numbers. We use the two-body correlated basis functions and the shape-dependent van der Waals interaction in our many-body calculations. We present an exhaustive study of the effect of inter-atomic correlations and the accuracy of the mean-field equations considering a wide range of particle numbers. We calculate the ground-state energy and the one-body density for different values of the van der Waals parameter C6 . We compare our results with those of the modified Gross-Pitaevskii results, the correlated Hartree hypernetted-chain equations (which also utilize the two-body correlated basis functions), as well as of the diffusion Monte Carlo for hard sphere interactions. We observe the effect of the attractive tail of the van der Waals potential in the calculations of the one-body density over the truly repulsive zero-range potential as used in the Gross-Pitaevskii equation and discuss the finite-size effects. We also present the low-lying collective excitations which are well described by a hydrodynamic model in the large particle limit.

  1. Update: Therapie der Necrobiosis lipoidica.

    PubMed

    Peckruhn, Melanie; Tittelbach, Jörg; Elsner, Peter

    2017-02-01

    Die Necrobiosis lipoidica ist eine seltene granulomatöse Erkrankung von bisher unzureichend geklärter Ätiologie. Häufig stellt die bei Diabetikern gehäuft zu beobachtende und zur Ulzeration neigende Dermatose eine starke Belastung für die Patienten dar. Bezüglich der Therapie existieren aktuell keine deutschen oder europäischen Leitlinien. Gleichzeitig lässt sich unter der aktuellen Standardtherapie, der lokalen oder intraläsionalen Anwendung von Glukokortikoiden, nicht immer ein zufriedenstellendes Ansprechen beobachten. Daher wurde untersucht, ob seit dem Jahr 2000 publizierte Therapiemodalitäten das Therapiespektrum relevant und erfolgversprechend erweitern. Es erfolgte eine Betrachtung aller Arbeiten im oben genannten Zeitraum, bei denen mehr als ein Einzelfallbericht je Therapiemodalität publiziert wurde. Insgesamt wurden in einem systematischen Review die Daten von 16 verschiedenen, seit 2000 publizierten Therapieverfahren in 49 Publikationen analysiert. Im Ergebnis zeigte sich, dass die meisten Erfahrungen bezüglich der topischen PUVA-Therapie, der photodynamischen Therapie (PDT) und der systemischen Therapie mit Fumarsäureestern vorliegen. Allerdings ist auffällig, dass mit steigender Zahl der pro Behandlungsmodalität behandelten Patienten der Anteil der Patienten, bei denen eine Abheilung bzw. eine teilweise Abheilung berichtet wurde, sinkt. Wir interpretieren diese Beobachtung als Publikationsbias. Daher kann für keines der besprochenen Verfahren eine klare Empfehlung als Therapie der zweiten Wahl nach Versagen der lokalen bzw. intraläsionalen Steroidtherapie gegeben werden.

  2. Bifurkationsanalyse eines LC Tank VCOs unter Berücksichtigung der variablen Kapazität

    NASA Astrophysics Data System (ADS)

    Bremer, J.-K.; Zorn, C.; Mathis, W.

    2009-05-01

    In dieser Arbeit präsentieren wir einen neuartigen Ansatz für den systematischen Entwurf von integrierten LC Tank VCO-Schaltungen basierend auf dem Andronov Hopf Theorem und der Störungstheorie. Der Ansatz ermöglicht es, eine Abschätzung des resultierenden Abstimmbereichs, eine Stabilitätsanalyse und eine Berechnung der Amplitude des VCOs im Vorfeld des eigentlichen Entwurfs durchzuführen. Des Weiteren erlaubt die vorgestellte Methode eine Optimierung des VCOs hinsichtlich der in den Spezifikationen geforderte Amplitude und eine Minimierung der höheren Harmonischen. Mit Hilfe eines ladungsbasierten MOS-Modells ist es möglich die spannungsabhängige Kapazität der Varaktortransistoren durch einen analytischen Ausdruck zu beschreiben. Auf Basis dieses analytischen Ausdrucks wird die amplitudenabhängige Großsignalkapazität des VCOs in Abhängigkeit von Designparametern und der Tuningspannung modelliert. Die Gültigkeit der vorgestellte Entwurfsmethode wird anhand eines Beispielentwurfes eines 2.4 GHz VCO unter Verwendung einer 0.25 μm HF-CMOS Technologie verifiziert.

  3. Auf der Suche nach dem Unendlichen.

    NASA Astrophysics Data System (ADS)

    Fraser, G.; Lillestøl, E.; Sellevåg, I.

    This book is a German translation by C. Ascheron and J. Urbahn, of "The search for infinity: solving the mysteries of the universe", published in 1994. Diese Buch beschreibt anschaulich die Meilensteine, die der Mensch seit der Antike auf der Suche nach dem Unendlichen erreicht und hinter sich gelassen hat. Es enthält Kurzbiographien der wichtigsten Forscher, verständlich geschriebene Texte sowie Erläuterungen der entscheidenen Fachtermini.

  4. Die aerobe Glykolyse der Tumorzelle

    NASA Astrophysics Data System (ADS)

    Schneider, Friedhelm

    1981-01-01

    A high aerobic glycolysis (aerobic lactate production) is the most significant feature of the energy metabolism of rapidly growing tumor cells. Several mechanisms, which may be different in different cell lines, seem to be involved in this characteristic of energy metabolism of the tumor cell. Changes in the cell membrane leading to increased uptake and utilization of glucose, a high level of fetal types of isoenzymes, a decreased number of mitochondria and a reduced capacity to metabolize pyruvate are some factors which must be taken into consideration. It is not possible to favour one of them at the present time.

  5. Europäisches Organ der Festkörperforschung und DDR-Devisenbringer Die Zeitschrift Physica Status Solidi im Kalten Krieg

    NASA Astrophysics Data System (ADS)

    Hoffmann, Dieter

    Mit dem Ziele, ein einheitliches internationales Organ der Festkörperphysik für den europäischen Raum zu schaffen, das eine rasche Publikation der für das Festkörpergebiet repräsentative Arbeiten ermöglicht, wird durch ein internationales Herausgebergremium eine neue wissenschaftliche Zeitschrift gegründet.

  6. Basis sets for the evaluation of van der Waals complex interaction energies: Ne-N2 intermolecular potential and microwave spectrum.

    PubMed

    Baranowska-Łączkowska, Angelika; Fernández, Berta

    2014-01-30

    In order to obtain efficient basis sets for the evaluation of van der Waals complex intermolecular potentials, we carry out systematic basis set studies. For this, interaction energies at representative geometries on the potential energy surfaces are evaluated using the CCSD(T) correlation method and large polarized LPol-n and augmented polarization-consistent aug-pc-2 basis sets extended with different sets of midbond functions. On the basis of the root mean square errors calculated with respect to the values for the most accurate potentials available, basis sets are selected for fitting the corresponding interaction energies and getting analytical potentials. In this work, we study the Ne-N2 van der Waals complex and after the above procedure, the aug-pc-2-3321 and the LPol-ds-33221 basis set results are fitted. The obtained potentials are characterized by T-shaped global minima at distances between the Ne atom and the N2 center of mass of 3.39 Å, with interaction energies of -49.36 cm(-1) for the aug-pc-2-3321 surface and -50.28 cm(-1) for the LPol-ds-33221 surface. Both sets of results are in excellent agreement with the reference surface. To check the potentials further microwave transition frequencies are calculated that agree well with the experimental and the aV5Z-33221 values. The success of this study suggests that it is feasible to carry out similar accurate calculations of interaction energies and ro-vibrational spectra at reduced cost for larger complexes than has been possible hitherto.

  7. Die Sonne, Stern unserer Erde

    NASA Astrophysics Data System (ADS)

    Lang, Kenneth R.; Ehlers, A.

    Dieses reich bebilderte Buch gibt eine Einführung in die Physik der Sonne und ihre Bedeutung für die Erde. Gestützt auf neueste Forschungsergebnisse aus Radioteleskop- und Satellitenbeobachtungen beschreibt der Autor die gewaltigen atomenergetischen Prozesse der Sonne, ihren geheimnisvollen Neutrinofluß, ihre seismischen Aktivitäten, Magnetfelder und Sonnenflecke, Korona, Sonnenausbrüche und Protuberanzen, den Sonnenwind, und die außerordentlich wichtige und vielfältige Bedeutung des Sonnenlichts, das Leben auf der Erde entstehen läßt und es auch gefährdet. Gut verständlich und in ansprechender Sprache geschrieben ist es ein wunderbares Buch für den Leser populärwissenschaftlicher Literatur, ein wertvolles Geschenk für Studenten der Astronomie und verwandter Disziplinen sowie Amateurastronomen.

  8. Reinraumtechnik für die Medizintechnik

    NASA Astrophysics Data System (ADS)

    Petek, Max; Jungbluth, Martin; Krampe, Erhard

    Die Reinraumtechnik ist heute ein unverzichtbarer Bestandteil bei der Fertigung von Produkten der Life Sciences, den Bereichen Pharma, Lebensmittel, Kosmetik und Medizintechnik. In Anbetracht der langen Historie der Medizintechnik ist sie jedoch eine sehr junge Disziplin. Die Bedeutung von Keimen und die richtige Einschätzung ihrer Größe wurden zwar sehr früh bereits durch Paracelsus erkannt, jedoch wurden daraus noch keine speziellen oder kontinuierlich umgesetzten Hygienevorschriften abgeleitet. Die erste bekannte technische Umsetzung von Hygieneempfehlungen geht auf den Franzosen François Nicolas Appert zurück, der eine aseptische Abfüllmethode für Lebensmittel entwickelte und diese 1810 veröffentlichte [1]. Die erste dokumentierte medizinische Umsetzung stellten Hygienevorschriften für Ärzte dar, die Ignaz Philipp Semmelweis nach 1847 in der Wiener Klinik für Geburtshilfe einführte [2].

  9. Die kalte Zunge

    NASA Astrophysics Data System (ADS)

    Bartels, Sören; Müller, Rüdiger

    Gefühlte Temperaturen. Ist ein Null Grad Celsius kalter Metallstab eigentlich kälter als ein Holzstab mit der selben Temperatur? Rein physikalisch gesehen natürlich nicht, aber wenn wir beide Stäbe anfassen, kommt uns der Metallstab deutlich kälter vor. Und wer kennt nicht die Szene aus dem Film Dumm und Dümmer in der Harry mit seiner Zunge am Metallrahmen des Skilifts hängen bleibt.Würde das auch passieren, wenn man an einem eiskalten Stück Holz lecken würde? Wohl kaum, doch woran liegt das eigentlich? Unterschiedliche Materialien haben verschiedene Fähigkeiten, Wärme zu übertragen und zu leiten. So transportiert Metall die von der Zunge ausgehende Wärme sehr schnell weiter und verändert seine Temperatur kaum, während die Zunge abkühlt. Holz hingegen leitet Wärme fast gar nicht und daher wird der Teil, der von der Zunge berührt wird, aufgewärmt.

  10. Physik-Nobelpreis 2004 Von der Freiheit in der Welt der Quarks

    NASA Astrophysics Data System (ADS)

    Bartels, Jochen

    2004-11-01

    Die Schwedische Akademie der Wissenschaften vergab in diesem Jahr den Physik-Nobelpreis zu gleichen Teilen an die amerikanischen Physiker David Gross, David Politzer und Frank Wilczek. Sie würdigte damit ihre theoretischen Arbeiten zur asymptotischen Freiheit in der starken Wechselwirkung.

  11. Entwicklung und Formulierung der Unternehmensstrategie

    NASA Astrophysics Data System (ADS)

    Crespo, Isabel; Bergmann, Lars; Lacker, Thomas

    Ursprünglich stammt der Begriff "Strategie“ aus dem Altgriechischen: "strategos“ bedeutete "Heer“, "Heeresmacht“ und damit auch "konzentrierte Kraft“; das Wort "agein“ bedeutete "tun, machen, treiben“. Ein Stratege war also eine Person, die ein Heer führte und damit Kraft, Macht und Stärke konzentrierte und einsetzen konnte. Strategie bezeichnete dementsprechend die Maßnahmen, die in dieser Funktion entwickelt wurden. Daher ist es leicht verständlich, dass der Begriff Strategie bis in die Mitte des letzten Jahrhunderts in erster Linie militärisch verstanden wurde. Anschließend wurde der Begriff in weiteren Bereichen, wie beispielsweise der Unternehmensführung, verwendet. Im betriebswirtschaftlichen Sinne bedeutet der Begriff Strategie die langfristig geplante Verhaltensweise eines Unternehmens zur Erreichung seiner Ziele.

  12. Die Herz-Lungen-Maschine

    NASA Astrophysics Data System (ADS)

    Krane, Markus; Bauernschmitt, Robert; Lange, Rüdiger

    Das Kapitel der modernen Herzchirurgie mit Einsatz der Herz-Lungen-Maschine am Menschen beginnt am 6. Mai 1953, als J. Gibbon bei einer 18-jährigen Patientin einen angeborenen Defekt in der Vorhofscheidewand verschließt [1]. Mit ersten experimentellen Versuchen zur extrakorporalen Zirkulation begann Gibbon bereits in den 30er Jahren des 20. Jahrhunderts. Die Grundlage für die heute gebräuchliche Rollerpumpe schufen Porter und Bradley mit ihrer "rotary pump“, welche sie 1855 zum Patent anmeldeten. Diese Pumpe wurde von DeBakey und Schmidt modifiziert und entspricht im Wesentlichen noch der heute sich im Routinebetrieb befindlichen Rollerpumpe [2].

  13. Die Gasultrazentrifuge als mediale Projektion des Kalten Krieges

    NASA Astrophysics Data System (ADS)

    Helmbold, Bernd

    Studien der letzten Dekaden nach der Wiedervereinigung von BRD und DDR erweitern die Perspektive der Wissenschaftsgeschichte vom Fokus des Big Science und der technisch-militärisch-industriellen Auseinandersetzung zwischen den zwei Blöcken zu einer globalen Transformation im Konflikt der Supermächte geprägt durch lokale und auch interne Ausformungen.

  14. Nomogramme der Sickerwasserprognose

    NASA Astrophysics Data System (ADS)

    Schneider, Wilfried; Stöfen, Heinke

    Kurzfassung Modelle zur Sickerwasserprognose stehen in unterschiedlicher Komplexität zur Verfügung. Komplexe Modelle werden aufgrund der schwierigen Handhabung und des enormen Eingabedatenumfangs in der Praxis kaum angewandt. Grobe Abschätzmethoden sind dagegen nicht ausreichend wissenschaftlich fundiert, um damit justiziable Ergebnisse erzielen zu können. Um die Kluft zwischen komplexer und einfacher, jedoch justiziabler sowie wissenschaftlich fundierter Methode zu schmälern, wurden Nomogramme für Sickerwasserprognosen zur Berücksichtigung der Endlichkeit der Quelle entwickelt. Mithilfe der Nomogramme können ohne Modellierungserfahrung schnell und einfach die zu erwartenden Schadstoffkonzentrationen am Ort der Beurteilung abgeschätzt werden, falls die Endlichkeit der Quelle der hauptsächlich zur Abminderung führende Prozess ist. Die Nomogramme basieren auf analytischen Lösungen der eindimensionalen Advektions-Dispersions-Gleichung. Sie berücksichtigen die Prozesse Advektion, Diffusion in Bodenwasser und -luft, Dispersion, lineare Sorption, Abbau 1. Ordnung innerhalb einer aus mehreren Bodenschichten bestehenden Sickerwasserzone, wobei die Endlichkeit der Schadstoffmasse in der Bodenkontamination einbezogen wird. Die Genauigkeit der Nomogramme wird dargestellt. Models of different complexity are available for groundwater risk assessment. In practice complex models are hardly used, due to their difficult handling and large data requirement. Rough estimation methods are not sufficiently scientifically founded to produce justiciable results. To reduce the gap between complex and easy to use but justiciable and scientifically founded methods we developed nomograms for groundwater risk assessment which take into account the finite mass of contaminant in the source. With the help of the nomograms the expected concentrations at the point of compliance (transition between the unsaturated and saturated zone) can be estimated easily, fast and without any

  15. Numerische Berechnung von Wirbelstromproblemen mit der Cell-Methode

    NASA Astrophysics Data System (ADS)

    Frenner, K.; Rucker, W. M.

    2006-09-01

    In dieser Arbeit wird die Cell-Methode auf die quasistatischen Maxwellgleichungen angewendet. Dabei werden für die notwendige Transformation vom Primärgitter auf das duale Gitter reziproke Basisvektoren verwendet. Anhand der Felddiffusion der magnetischen Induktion in einen zylindrischen Leiter werden Ergebnisse der Cell-Methode mit einer analytischen Vergleichsrechnung präsentiert.

  16. Haftung in der Medizintechnik

    NASA Astrophysics Data System (ADS)

    Müller, Ute; Lücker, Volker

    Die Unversehrtheit von Leib und Leben ist das größte Rechtsgut unserer Gesellschaft. Dies macht schon das Grundgesetz in Art. 2 Abs. Satz 1 GG deutlich. Die Öffentlichkeit zeigt daher größtes Interesse an Produkten, welche der Gesundheit dienen und Leben retten oder erhalten. Dieses Interesse gilt einerseits der Entwicklung und Bereitstellung leistungsfähiger Medizinprodukte, andererseits zielt es auf deren Sicherheit. Um vor allem letztere zu gewährleisten, nimmt der Gesetzgeber alle Beteiligten in die Pflicht, die auftretenden Risiken auf das geringstmögliche Maß zu begrenzen. Dies spiegelt sich in den rechtlichen Vorgaben ebenso wie in den Haftungsfolgen, die bei Verletzung dieser Vorgaben greifen, wieder. Diese Folgen können dementsprechend gravierend ausfallen, von Geldstrafen bis zu Freiheitsstrafen, von Bußgeldzahlungen bis zum Schadenersatzansprüchen, die schnell ein wirtschaftliches Aus bedeuten können. Den Beteiligten, allen voran den Herstellern, muss deshalb daran gelegen sein, nicht nur die Produkte, sondern auch deren Sicherheit stetig weiter zu entwickeln.

  17. Der Kalte Krieg in der Peripherie Griechische Physiker und Atomenergie nach dem Zweiten Weltkrieg

    NASA Astrophysics Data System (ADS)

    Vlahakis, George N.

    Die vorliegende Arbeit analysiert Ansichten griechischer Physiker zur Atomenergie und deren mögliche Anwendung nach dem Zweiten Weltkrieg, insbesondere während des Kalten Kriegs. Einerseits werden Ansichten von Physik- Professoren griechischer Universitäten präsentiert - beispielsweise von Dimitrios Hondros, der Student von Arnold Sommerfeld und Mitarbeiter von Peter Debye in München war, und andererseits wird die Politik der griechischen Regierung für die Etablierung eines Forschungsinstitutes diskutiert, das der Entwicklung der Atomenergie dienen sollte; ebenfalls wird eine öffentliche Meinungsumfrage zu diesen Thema, die in den Tageszeitungen der damaligen Zeit präsentiert wurde, diskutiert.

  18. Werner Heisenberg zum 100. Geburtstag: Pionier der Quantenmechanik

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2001-11-01

    Werner Heisenberg war eine der prägendsten Gestalten der Physik des 20. Jahrhunderts. Zu seinen wichtigsten Verdiensten gehören die Grundlegung der Quantenmechanik, die Formulierung der Unschärferelationen sowie die Beteiligung an der Ausarbeitung der Kopenhagener Deutung der Quantenmechanik. Darüber hinaus lieferte er Arbeiten von fundamentalem Charakter zur Theorie des Atomkerns, zur kosmischen Strahlung und zur Quantenfeldtheorie. Während des Krieges war er an den Arbeiten des Uranvereins beteiligt, der die Möglichkeit einer Entwicklung von Kernwaffen untersuchte, jedoch über Vorarbeiten zur Reaktorphysik nicht hinauskam. Wegen dieser Tätigkeit wurde er bei Kriegsende für einige Monate in England interniert. Nach seiner Rückkehr widmete er sich vor allem dem Aufbau der Physik in Deutschland, die während der NS-Zeit nahezu ihrer gesamten Substanz beraubt worden war.

  19. Untersuchung der Richtwirkung der Einkopplung von ebenen Wellen in eine Leitung

    NASA Astrophysics Data System (ADS)

    Magdowski, M.; Vick, R.

    2013-07-01

    Elektrische Leitungen und Kabel stellen häufig die Haupteinfallstore für elektromagnetische Felder in die daran angeschlossenen Geräte und Systeme dar. Für die Einkopplung einer ebenen Welle kann der in eine Leitung eingekoppelte Strom unter bestimmten Voraussetzungen mit Hilfe der Leitungstheorie sehr effizient bestimmt werden. Er hängt dabei von den Abmessungen der Leitung, den Leitungsabschlüssen sowie der Amplitude, der Wellenlänge und der Einfallsrichtung der ebenen Welle ab. In dieser Arbeit wird die Abhängigkeit der Einkopplung von der Einfallsrichtung näher untersucht. Dazu werden Richtdiagramme der Einkopplung berechnet, dargestellt und hinsichtlich der mittleren und maximalen Einkopplung über alle Einfallsrichtungen und Polarisationen ausgewertet. Die Ergebnisse werden genutzt, um die maximale Direktivität der Einkopplung in eine Leitung zu bestimmen. Fasst man die Einkopplung externer Felder in eine Leitung als einen Störfestigkeitstest auf, so kann die maximale Direktivität benutzt werden, um einen Vergleich zwischen unterschiedlichen Messumgebungen wie Absorberhallen und Modenverwirbelungskammern herzustellen.

  20. Zeit im Wandel der Zeit.

    NASA Astrophysics Data System (ADS)

    Aichelburg, P. C.

    Contents: Einleitung(P. C. Aichelburg). 1. Über Zeit, Bewegung und Veränderung (Aristoteles). 2. Ewigkeit und Zeit (Plotin). 3. Was ist die Zeit? (Augustinus). 4. Von der Zeit (Immanuel Kant). 5. Newtons Ansichten über Zeit, Raum und Bewegung (Ernst Mach). 6. Über die mechanische Erklärung irreversibler Vorgänge (Ludwig Boltzmann). 7. Das Maß der Zeit (Henri Poincaré). 8. Dauer und Intuition (Henri Bergson). 9. Die Geschichte des Unendlichkeitsproblems (Bertrand Russell). 10. Raum und Zeit (Hermann Minkowski). 11. Der Unterschied von Zeit und Raum (Hans Reichenbach). 12. Newtonscher und Bergsonscher Zeitbegriff (Norbert Wiener). 13. Die Bildung des Zeitbegriffs beim Kinde (JeanPiaget).14. Eine Bemerkung über die Beziehungen zwischen Relativitätstheorie und der idealistischen Philosophie (Kurt Gödel). 15. Der zweite Hauptsatz und der Unterschied von Vergangenheit und Zukunft (Carl Friedrich v. Weizsäcker). 16. Zeit als physikalischer Begriff (Friedrich Hund). 17. Zeitmessung und Zeitbegriff in der Astronomie (Otto Heckmann). 18. Kann die Zeit rückwärts gehen? (Martin Gardner). 19. Zeit und Zeiten (Ilya Prigogine, Isabelle Stengers). 20. Zeit als dynamische Größe in der Relativitätstheorie (P. C. Aichelburg).

  1. Der evolutionäre Naturalismus in der Ethik

    NASA Astrophysics Data System (ADS)

    Kaiser, Marie I.

    Charles Darwin hat eindrucksvoll gezeigt, dass der Mensch ebenso wie alle anderen Lebewesen ein Produkt der biologischen Evolution ist. Die sich an Darwin anschließende Forschung hat außerdem plausibel gemacht, dass sich nicht nur viele der körperlichen Merkmale des Menschen, sondern auch (zumindest einige) seiner Verhaltensdispositionen in adaptiven Selektionsprozessen herausgebildet haben. Die Vorstellung, dass auch die menschliche Moralität evolutionär bedingt ist, scheint daher auf den ersten Blick ganz überzeugend. Schließlich hat die Evolutionstheorie in den vergangenen Jahrzehnten in vielen Bereichen (auch außerhalb der Biologie) ihre weitreichende Bedeutung unter Beweis gestellt. Warum sollte, so könnte man beispielsweise fragen, gerade die Fähigkeit des Menschen, moralische Normen aufzustellen und gemäß ihnen zu handeln, nicht evolutionär erklärt werden können? Und warum sollte eine solche evolutionäre Erklärung der menschlichen Moralität irrelevant für die Rechtfertigung moralischer Normen sein? Warum sollte die Ethik eine Bastion der Philosophen bleiben, für die evolutionsbiologische Forschungsergebnisse über den Menschen und seine nächsten Verwandten keinerlei Relevanz besitzen?

  2. The Political Views of Students at the Universities of the Armed Forces in Comparison to Those of Students at Public Institutions (Die politischen Orientierungen der Studenten an den Universitaeten der Bundeswehr im Vergleich zu den Studenten an oeffentlichen Hochschulen)

    DTIC Science & Technology

    2001-12-01

    zu sein scheint" ( Noelle - Neumann , E. und Petersen, Th., S. 40).5 4 Gerade auch bei den rasant zunehmenden Aufgaben der Bundeswehr bei...Bonnemann A., Hoffmann-Broll U., 1999 Studentische Orientierungen zwischen akademischer und soldatischer Lebenswelt. Noelle - Neumann E., Petersen Th

  3. Quantitative Analyse und Visualisierung der Herzfunktionen

    NASA Astrophysics Data System (ADS)

    Sauer, Anne; Schwarz, Tobias; Engel, Nicole; Seitel, Mathias; Kenngott, Hannes; Mohrhardt, Carsten; Loßnitzer, Dirk; Giannitsis, Evangelos; Katus, Hugo A.; Meinzer, Hans-Peter

    Die computergestützte bildbasierte Analyse der Herzfunktionen ist mittlerweile Standard in der Kardiologie. Die verfügbaren Produkte erfordern meist ein hohes Maß an Benutzerinteraktion und somit einen erhöhten Zeitaufwand. In dieser Arbeit wird ein Ansatz vorgestellt, der dem Kardiologen eine größtenteils automatische Analyse der Herzfunktionen mittels MRT-Bilddaten ermöglicht und damit Zeitersparnis schafft. Hierbei werden alle relevanten herzphysiologsichen Parameter berechnet und mithilfe von Diagrammen und Graphen visualisiert. Diese Berechnungen werden evaluiert, indem die ermittelten Werte mit manuell vermessenen verglichen werden. Der hierbei berechnete mittlere Fehler liegt mit 2,85 mm für die Wanddicke und 1,61 mm für die Wanddickenzunahme immer noch im Bereich einer Pixelgrösse der verwendeten Bilder.

  4. Coronellis Cosmos in der Melker Stiftsbibliothek.

    NASA Astrophysics Data System (ADS)

    Glaßner, Gottfried; Pärr, Nora

    2009-06-01

    Die Melker Stiftsbibliothek besitzt ein Globenpaar des berühmten venezianischen Globenbauers Vincenzo Coronelli (1650-1718), einen Erdglobus von 1688 und einen Himmelsglobus von 1693. Wie und wann die beiden Globen nach Melk gekommen sind, ist nicht bekannt. Dass sie zur ursprünglichen Ausstattung der 1735 fertig gestellten Barockbibliothek gehörten, wird aber aus der zentralen Stellung deutlich, die dem Globus (Erdglobus und Armillarphäre) in dem von Paul Troger 1732 gemalten Deckenfresko zukommt. Mehrfach begegnet das Motiv des Globus als Attribut der Weisheit bzw. Philosophie, der Geographie bzw. Geometrie und der Astronomie in den beiden Hauptsälen wie auch in der Deckenmalerei von Johann Bergl in der Oberen Bibliothek (1768) und in der Kuppel des Gartenpavillons (1764).

  5. Optoelektronik Infrarotlicht für die Faseroptik

    NASA Astrophysics Data System (ADS)

    Drach, Volker

    2003-07-01

    Die Eigenschaften der kondensierten Materie sind durch die elektronische Bandstruktur bestimmt. Daher sind sie in Raumladungszonen an Oberflächen abhängig von der Ladungsdichte. Ein Team des Forschungszentrums Karlsruhe machte sich nun diesen Effekt zu Nutze und induzierte in metallischen Nanostrukturen durch eine elektrische Spannung reversible Änderungen der makroskopischen Eigenschaften [1].

  6. Segmentierung der Papille in Fundusaufnahmen Aktives Kreisbogen-Modell

    NASA Astrophysics Data System (ADS)

    Schmidt, Torsten; Doering, Axel

    In der vorliegenden Arbeit präsentieren wir einen praxistauglichen Algorithmus zur automatischen Segmentierung der Disc-Grenze der Papille in Fundusaufnahmen. Ausgehend von einem lokalisierten Papillenpunkt werden Grauwertverläufe in horizontaler und vertikaler Richtung mittels einer Energiefunktion ausgewertet. In einem iterativen Prozess wird die Ellipse der tatsächlichen Disc-Grenze angenähert. Der Papillenrand konnte im Testdatensatz in 88% der Aufnahmen erfolgreich segmentiert werden. Der Algorithmus ist robust gegenüber der Lage des Startpunktes innerhalb der Papille und soll als Unterstützung bei der Glaukombefundung eingesetzt werden.

  7. Grundbegriffe der Thermodynamik

    NASA Astrophysics Data System (ADS)

    Heintze, Joachim

    In diesem Kapitel geht es darum, Vorgänge zu analysieren, bei denen der thermische Zustand eines Systems verändert wird: Daher der Name "Thermodynamik". Wir werden zunächst untersuchen, unter welchen Umständen man eine Zustandsänderung im Detail beschreiben kann. Hierbei werden wir zwei grundsätzlich verschiedene Arten, Zustandsänderungen herbeizuführen, kennenlernen: reversible und irreversible Prozesse. Sodann werden wir die Eigenschaften von Zustandsgrößen allgemein definieren und dabei auf eine überaus wichtige neue Zustandsgröße, die Entropie, stoßen.

  8. Theoretische Konzepte der Physik

    NASA Astrophysics Data System (ADS)

    Longair, Malcolm S.; Simon, B.; Simon, H.

    "Dies ist kein Lehrbuch der theoretischen Physik, auch kein Kompendium der Physikgeschichte ... , vielmehr eine recht anspruchsvolle Sammlung historischer Miniaturen zur Vergangenheit der theoretischen Physik - ihrer "Sternstunden", wenn man so will. Frei vom Zwang, etwas Erschöpfendes vorlegen zu müssen, gelingt dem Autor etwas Seltenes: einen "lebendigen" Zugang zum Ideengebäude der modernen Physik freizulegen, ... zu zeigen, wie Physik in praxi entsteht... Als Vehikel seiner Absichten dienen dem Autor geschichtliche Fallstudien, insgesamt sieben an der Zahl. Aus ihnen extrahiert er das seiner Meinung nach Lehrhafte, dabei bestrebt, mathematische Anachronismen womöglich zu vermeiden... Als Student hätte ich mir diese gescheiten Essays zum Werden unserer heutigen physikalischen Weltsicht gewünscht. Sie sind originell, didaktisch klug und genieren sich auch nicht, von der Faszination zu sprechen, die ... von der Physik ausgeht. Unnötig darauf hinzuweisen, das sie ein gründliches "konventionelles" Studium weder ersetzen wollen noch können, sie vermögen aber, dazu zu ermuntern." #Astronomische Nachrichten (zur englischen Ausgabe)#1

  9. Darwin als Sehhilfe für die Psychologie - Evolutionspsychologie

    NASA Astrophysics Data System (ADS)

    Schwab, Frank

    Im Folgenden geht es um Einäugige, stereoskopisches Sehen, weite und enge Horizonte, Monokel und Sonnenbrillen. Der Beitrag versucht die Metapher des Sehens und der Sehhilfen anzuwenden, um so zu verdeutlichen, welchen Gewinn die herkömmliche Psychologie durch die Verwendung einer Darwin'schen Brille erlangen kann.

  10. Wissenschaft, die unsere Kultur verändert. Tiefenschichten des Streits um die Evolutionstheorie

    NASA Astrophysics Data System (ADS)

    Patzelt, Werner J.

    Die Evolutionstheorie ist eine der erfolgreichsten wissenschaftlichen Theorien. Sie erlaubt es, unsere Herkunft zu verstehen und riskante Merkmale gerade der menschlichen Spezies zu begreifen. Zugleich ist die Evolutionstheorie eine der umstrittensten Theorien. Das liegt nicht an ihrer empirischen Tragfähigkeit, sondern an ihrem Gegenstand. Sie handelt nämlich nicht nur - wie Hunderte andere wissenschaftliche Theorien - von der "Welt da draußen“, sondern vor allem auch von uns selbst und von unserem Platz in dieser Welt. Den einen gilt sie obendrein als Überwinderin religiösen Aberglaubens, den anderen als neuer Zugang zu Gott und seinem Wirken in der Welt. Ferner sehen die einen in der Evolution eine unbezweifelbare Tatsache gleich der Schwerkraft oder dem Holocaust, die anderen aber eine - noch oder dauerhaft - unbewiesene Hypothese oder gar eine falsche Schöpfungslehre. Und während die meisten Streitfragen solcher Art nach wechselseitig akzeptierten Regeln ‚normaler Wissenschaft‘ geklärt werden, wird bei der Frage nach dem Woher unserer Spezies und Kultur die intellektuelle Zuständigkeit von Wissenschaft mitunter überhaupt bezweifelt. Anscheinend geht es schon um recht tiefe Schichten unserer Kultur und nicht nur der wissenschaftlichen, wenn - wie seit 150 Jahren - um die Evolutionstheorie gestritten wird. Wie sehen diese Schichten aus?

  11. Warum Normen für die Instandhaltung?

    NASA Astrophysics Data System (ADS)

    Tschuschke, Werner E.

    Viele kennen Normen wie Konstruktionsnormen, in denen z. B. der Außendurchmesser, die Steigung, der Flankenwinkel und andere Maße eines Gewindes festgelegt sind. Es gibt Prüfnormen aber auch Normen eines Managementsystems wie des Qualitätsmanagements in der DIN-EN-ISO-9000-Familie. Aber warum Normen für die Instandhaltung? Begonnen hat es mit der DIN 31051, die 1985 veröffentlicht wurde. Es war die erste Instandhaltungsnorm weltweit und sie wurde von der Schweiz und Österreich übernommen. In ihr sind Begriffe der Instandhaltung, Grundlagen zum Abnutzungsprozess und Aktivitäten der Instandhaltung beschrieben. Es wurde der Begriff Instandsetzung statt Reparatur publiziert: Nicht mehr Flickschustern sondern einen funktionsfähigen Anlagenzustand möglichst erhalten.

  12. Qualitätsmanagement in der Lebensmittelindustrie

    NASA Astrophysics Data System (ADS)

    Thorn, Volker

    Die wesentlichen Kunden der Lebensmittelindustrie sind der Einzel- und Großhandel und die Verbraucher. Jedes Unternehmen kann mittel- und langfristig nur existieren, wenn seine Kunden zufrieden sind. Kunden sind zufrieden, wenn ihre Erwartungen, die sie an Produkt, Service und Preis stellen, erfüllt werden. Also die bestimmte erwartete Qualität (Leistung) sichergestellt wird. Trotz aller Bemühungen und Anstrengungen der Anbieter, Qualitätsprodukte auf den Markt zu bringen, kames in den letzten Jahren immer wieder zu Lebensmittelskandalen.

  13. Dialektischer Materialismus in der Quantentheorie

    NASA Astrophysics Data System (ADS)

    Fuchs, Klaus

    Der absolute Determinismus der klassischen Mechanik bietet keine Ansatzpunkte für eine befriedigende Naturphilosophie. Mit der Quantenmechanik werden nicht lediglich die Unzulänglichkeiten einzelner klassischer Begriffe, sondern die des gesamten klassischen Begriffssystems beseitigt.Translated AbstractDialectical Materialism in Quantum TheoryThe absolute determinism of classical mechanics does not provide any base for a satisfactory philosophy of nature. In quantum mechanics the shortcomings of not only some single classical concepts but of the classical description as a whole are removed.

  14. Stufenweise Integration von eLearning an der Technischen Universität München

    NASA Astrophysics Data System (ADS)

    Pätzold, Sebastian; Graf, Stephan; Gergintchev, Ivan; Pongratz, Hans; Rathmayer, Sabine

    Der vorliegende Beitrag beschreibt als Best Practice Beispiel die stufenweise Integration eines Learning Management Systems (LMS) in die Infrastruktur von Information und Kommunikation (IuK) der Technischen Universität München (TUM). Dabei wird sowohl die Konsolidierung mehrfach angebotener Funktionalitäten und Dienste in den verschiedenen Portalen der Universität als auch die sukzessive Optimierung der Abläufe aufgezeigt. Gleichzeitig wird auf zukünftige weitere Entwicklungen hin zu einer vollständigen Integration der IuK, aber auch auf die Probleme in den unterschiedlichen Stadien der Entwicklung eingegangen.

  15. Grundlagen der Organisationsgestaltung

    NASA Astrophysics Data System (ADS)

    Spath, Dieter; Koch, Steffen

    In diesem Kapitel werden Grundlagen der Organisationsgestaltung dargestellt. Es scheint nahe liegend, diese Inhalte wie in einem Lehrbuch aufzubereiten. Schließlich handelt es sich um grundlegende Inhalte. Die Neufassung dieses Abschnitts ist aber stärker für Verantwortliche in Unternehmen geschrieben und weniger wissenschaftlich geprägt. Das "Lehrbuchwissen“ wird daher bewusst knapp gehalten. Das betrifft z.B. die Klärung des Organisationsbegriffes und die Fragen nach den Zielsetzungen und den Gestaltungsbereichen von Organisation. Stattdessen widmet sich das Kapitel ausführlicher den Fragen, ob es Trends in der Organisationsgestaltung gibt, welche wichtigen Einflussgrößen existieren und welche übergeordneten und beständigen Leitlinien es gibt.

  16. Interaktive Visualisierung von Abständen und Ausdehnungen anatomischer Strukturen für die Interventionsplanung

    NASA Astrophysics Data System (ADS)

    Rössling, Ivo; Cyrus, Christian; Dornheim, Lars; Hahn, Peter; Preim, Bernhard; Boehm, Andreas

    Im Rahmen der Interventionsplanung muss der Chirurg therapierelevante Entscheidungen auf Basis räumlicher Relationen anatomischer Strukturen treffen. Interaktive 3D-Visualisierungen unterstützen diesen Prozess qualitativ. Quantitative Fragestellungen (Tumorausdehnung, Infiltrationstiefe, etc.) erfordern die Integration einer Bemaßung, deren Nutzen wesentlich von einer geeigneten Darstellung abhängt. In dieser Arbeit haben wir allgemeine Kriterien für die Eignung von Visualisierungen von Bemaßungen in interaktiven 3D-Szenen erarbeitet. Daran orientierend haben wir verschiedene Varianten der Darstellung von Abständen und Ausdehnungen anatomischer Strukturen betrachtet und ihr Erscheinungsbild hierzu zweckmäßig parametrisiert. Die Ausprägungen dieser Darstellungsparameter wurden in einer Studie auf ihre visuellen Wirkung hin an Chirurgen evaluiert. Es zeigte sich, dass die befragten Mediziner höchsten Wert auf Kohärenz und klare Zuordnung der Bemaßung setzten und überraschenderweise dafür sogar Abstriche in der direkten Lesbarkeit in Kauf nahmen.

  17. Die Besonderheiten der Aussprache des amerikanischen Englisch und ihre Vermittlung in Lehrwerken (Peculiarities of American English Pronunciation and their Treatment in Teaching Texts)

    ERIC Educational Resources Information Center

    Dahlmann-Resing, Guenther

    1978-01-01

    Divides American (Midwestern) sounds into 10 categories, and describes their pronunciation on the basis of Daniel Jones'"English Pronuncing Dictionary." Also describes American peculiarities of intonation, rhythm and nasalization. A list of words differing in pronunciation from British is added. (Text is in German.) (IFS/WGA)

  18. Modellbasierte interindividuelle Registrierung an der lateralen Schädelbasis

    NASA Astrophysics Data System (ADS)

    Riechmann, M.; Lohnstein, P. U.; Raczkowsky, J.; Klenzner, T.; Schipper, J.; Wörn, H.

    Bei chirurgischen Eingriffen an der lateralen Schädelbasis wird in der zur Zeit gängigen Praxis das Knochengewebe unter optischer Kontrolle großflächig ablativ entfernt, um den Operationssitus freizulegen und konventionell operieren zu können. Prinzipiell soll dabei die Schonung vital und funktional bedeutender Strukturen berücksichtigt werden. Zur weiteren Minimierung der Traumatisierung und zur Erhaltung der strukturellen anatomischen Integrität soll eine alternative endoskopische Operationstechnik entwickelt werden, bei der der Situs durch dünne im Knochen liegende Bohrkanäle erreicht wird. Im Rahmen der Evaluierung der generellen Eignung der geometrischen Ausprägungen der humanen lateralen Schädelbasis wurden Methoden entwickelt, die anhand virtueller Modelle die Zugänglichkeit der anatomischen Zielstrukturen bestimmen können. Ein dabei auftretendes Problem ist die interindividuelle Vergleichbarkeit der Ergebnisse, da aufgrund der anatomischen Variationen eine zuverlässige interindividuelle Registrierung nicht trivial ist. Diese Arbeit beschreibt ein modellbasiertes Verfahren zur automatischen Registrierung mehrerer Felsenbeine zu einander über die prägnante Geometrie der Cochlea.

  19. Zum Wissenschaftsverständnis der modernen Evolutionsbiologie

    NASA Astrophysics Data System (ADS)

    Sommer, Ralf J.

    Die moderne Evolutionsbiologie hat ihren Ursprung in den Arbeiten von Charles Darwin und Alfred Wallace (Darwin 1963). Der gemeinsame Ausgangspunkt des Evolutionsgedanken ist dabei die Beobachtung, dass die biologische Welt nicht konstant ist. Biologische Systeme und alle darin lebenden Organismen unterliegen über längere Zeiträume hinweg einer stetigen Veränderung. Diese grundlegende Eigenschaft biologischer Systeme macht die Biologie zu einer historischen Wissenschaft und stellt einen wichtigen Gegensatz zu großen Teilen der Physik dar. Obwohl die Aussage von der Veränderlichkeit der Arten heute trivial klingt, war sie im 19. Jahrhundert eine Revolution, da die Konstanz der Arten und der Welt eine vorherrschende Stellung im damaligen Weltbild hatte (Amundson 2005).

  20. Topika und deren Einsatz in der Dermatologie.

    PubMed

    Wohlrab, Johannes

    2016-11-01

    Grundkenntnisse zur Zusammensetzung und den regulatorischen Hintergründen von Topika gehören zu den alltäglich benötigten Herausforderungen dermatologisch-ärztlichen Handelns. Ein professioneller und indikationsgerechter Umgang bei der Auswahl, Verordnung und Anwendung topischer Präparate ist somit Voraussetzung für eine verantwortungsvolle fachärztliche Tätigkeit. Dabei bereiten die regulatorische Zuordnung (Arzneimittel, Medizinprodukt, Kosmetikum), die Feststellung der Erstattungsfähigkeit durch die GKV und die unzureichende Kennzeichnung des Vehikelsystems einzelner Präparate nicht selten Probleme. Bestreben sollte es sein, neben der Wahl des geeigneten Wirkstoffs und der geeigneten Konzentration ein an die Indikation der Therapie angepasstes galenisches System auszuwählen, um dessen Eigenwirkung für den therapeutischen Effekt nutzen zu können. Bei der Verschreibung von Rezepturarzneimitteln sollte nach Möglichkeit immer auf eine standardisierte Rezeptur (Magistralrezeptur) zurückgegriffen werden. Durch die Vielzahl der möglichen Inhaltsstoffe und der sich daraus ergebenden Komplexität eines galenischen Systems ist eine willkürliche Manipulation durch qualitative oder quantitative Veränderungen einzelner Komponenten mit hohen Risiken für eine Instabilität und damit für Sicherheit und Sinnhaftigkeit verbunden. Eine optimierte Anwendung von Topika setzt zudem Grundlagenkenntnisse zur Pharmakokinetik und zur evidenzbasierten Therapieplanung voraus.

  1. Tycho Brahe - Instrumentenbauer und Meister der Beobachtungstechnik

    NASA Astrophysics Data System (ADS)

    Wolfschmidt, Gudrun

    Vor der Erfindung des Fernrohrs war der dänische Astronom Tycho Brahe (1546 - 1601) der bedeutendste beobachtende Astronom. Von seinem Observatorium Uraniborg auf der - damals dänischen - Insel Hven ist heute noch der Grundriß erkennbar, von Stjerneborg sind die Fundamente erhalten, die Kuppeln in den 1950er Jahren ergänzt. In der Astronomie-Ausstellung im Deutschen Museum gibt es ein Modell der Sternwarte Uraniborg und der zugehörigen Instrumente (Maßstab 1:10); das größere Modell wurde dem Technischen Museum in Malmö geschenkt. Die Instrumente, die er in den Observatorien Uraniborg und Stjerneborg benutzte, sind nicht erhalten. Aber es gibt gute Beschreibungen der Instrumente (Halbkreis, Quadranten, Sextanten, Armillarsphären, Triquetrum, Himmelsglobus) in seinem Buch Astronomiae instauratae mechanica (Wandsbek 1598). Eine Nachbildung des großen hölzernen Quadranten kann man im Runden Turm in Kopenhagen sehen. Zwei Sextanten, hergestellt für Tycho um 1600 von Jost Bürgi und Erasmus Habermel, gibt es noch im Nationalmuseum für Technik in Prag. Ähnlichkeiten von Tychos Instrumenten mit Groß-Instrumenten aus dem islamischen Kulturkreis sind auffällig. Tycho Brahes Meßgeräte markieren einen großen Fortschritt in der Entwicklung astronomischer Instrumente und Meßtechniken und bilden die Grundlage für den weiteren Fortschritt der Positionsastronomie und der damit verbundenen Tabellenwerke. Die Nachwirkungen sind bis ins 17. und 18. Jahrhundert nachweisbar.

  2. Quantenphysikalischer Ursprung der Eichidee

    NASA Astrophysics Data System (ADS)

    Bopp, Fritz

    Betrachtet man die Quantenphysik als Zusammenspiel von elementaren Erzeugungs- und Vernichtungsprozessen, so sind Eichfeldtheorien nicht nur möglich, sondern auch notwendig. Die komplex konjugierten Phasenfaktoren jedes Paares von Erzeugungs- und Vernichtungsoperatoren sind nämlich. willkürlich wählbar. Darum müssen Quantenfeldtheorien vollständig phaseninvariant sein. Das ist ohne Eichfelder nicht möglich.Dem steht im Wege, daß die Diracgleichung nicht einmal global vollständig phaseninvariant ist. Multipliziert man nämlich die Komponenten der Erzeugungs- und Vernichtungsoperatoren mit verschiedenen konstanten Phasenfaktoren, so ändern sich die Diracmatrizen. Nur die Diracschen Vertauschungsrelationen bleiben invariant. Doch sind die Diracgleichungen vor und nach der Transformation physikalisch äquivalent. Man kann also sagen: Systeme freier Fermionen werden erst durch die Klasse aller äquivalenten Diracgleichungen vollständig dargestellt.Da die Diracschen Vertauschungsrelationen gegen beliebige unitäre Transformationen invariant sind, ist die Klasse äquivalenter Diracgleichungen U 4-invariant. Unitäre Diagonalmatrizen liefern willkürliche Phasentransformationen der Spinorkomponenten, so daß die zur Gruppe U 4 gehörigen Eichfelder zu eine allgemein phaseninvarianten Theorie führen. Sie ist so eng mit der QED verwandt, daß wir von einer erweiterten Quantenelektrodynamik, EQE, sprechen können.Hier soll nur gezeigt werden, daß die EQE existiert. Dabei liefert die invariante Untergruppe U 1 von U 4 die QED. Die komplementäre Untergruppe SU 4 umschließt vier Untergruppen SU 3, drei Untergruppen O 4 und sechs Untergruppen SU 2. Letztere könnten den drei Paaren von Quarks und den drei Paaren von Leptonen entsprechen, wobei sich die Quarkpaare zu einer Gruppe SU 3 zusammenschließen. Mehr als zweimal drei Paare von elementaren Fermionen gibt es in der EQE nicht. Sie wird zwar kaum mit der vereinigten QED und QCD identisch sein. Doch sollte sie

  3. Physikgeschichte Die Anfänge des Physik-Nobelpreises

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2003-09-01

    Durch Absorption von zwei Laserstrahlen mit unterschiedlichen Wellenlängen können in Halbleitern makroskopische Ströme erzeugt werden. Die Ausbreitungsrichtung der Elektronen und insbesondere die Ausrichtung ihrer Spins lassen sich über die relative Phase der beiden Laserfelder kohärent kontrollieren, wie kürzlich zwei Gruppen an den Universitäten von Marburg und Iowa demonstrierten [1, 2]. Genutzt wird bei diesem Experiment der Effekt der Quanteninterferenz zur Erzeugung von elektrischen Spinströmen.

  4. Aufbau und Anpassung der Motorsteuerungs-Software für Otto- und Dieselmotoren

    NASA Astrophysics Data System (ADS)

    Stuhler, Harald; Ricken, Volker; Diener, René

    Die Erfüllung steigender Kundenansprüche und strenger gesetzlicher Vorgaben hinsichtlich der Verringerung des Kraftstoffverbrauchs, der Reduzierung von Schadstoffemissionen, der Erhöhung von Fahrsicherheit, Fahrleistung und Fahrkomfort ist untrennbar mit dem Einzug elektronischer Systeme in moderne Kraftfahrzeuge verbunden. Die elektronischen Systeme bestimmen zunehmend den Kundennutzen und werden für die Differenzierung der Automobilhersteller untereinander immer wichtiger. Daher sind sie ein wesentlicher Erfolgsfaktor moderner Kraftfahrzeuge.

  5. Friedrich Möglich - sein Beitrag zum Aufbau der Physik in der DDR. Friedrich Möglich - langjähriger Mitherausgeber und Chefredakteur der Annalen der Physik

    NASA Astrophysics Data System (ADS)

    Rompe, Robert

    Friedrich Möglich, ein Schüler von Max von Laue und Erwin Schrödinger, übernahm 1947 die Chefredaktion der Annalen der Physik.Translated AbstractFriedrich Möglich - His Contributions to the Formation of Physics in GDRFriedrich Möglich a student of Max von Laue and Erwin Schrödinger took over as editor in chief of Annalen der Physik in 1947.

  6. Physik gestern und heute: Visualisierung mit der Schlierenmethode

    NASA Astrophysics Data System (ADS)

    Heering, Peter

    2006-07-01

    Der Name des österreichischen Forschers Ernst Mach ist heute noch mit der Schallgeschwindigkeit verbunden. Diese Auszeichnung resultiert aus Machs Untersuchungen, wie sich Projektile mit Überschallgeschwindigkeit durch die Luft bewegen. Gerade in jüngster Zeit hat die Anwendung derartiger Methoden durch technische Modifikationen wieder einen Aufschwung erfahren.

  7. Die Liberalisierung de Telekommunikationsbranche in Deutschland( The Liberalization of the Telecommunication-Industry in Germany)

    DTIC Science & Technology

    2004-03-01

    anderen europdischen Ldndern - eine dramatische Entwick- lung erlebt: Zahlreiche neue Anbieter von Telekommunikationsdienstleistungen haben den Markt ...AG (DTAG), zweitens die Liberalisierung des Marktzutritts bzw. Offfiung des Marktes , und drittens die Deregulierung. Wdhrend also mit Liberalisierung...die Offnung des Marktes ffir neue Anbieter gemeint ist, wird unter Deregulierung der Abbau staatlicher Vorschriften iiber das Verhalten der Markt

  8. SPHERICAL DIE

    DOEpatents

    Livingston, J.P.

    1959-01-27

    A die is presented for pressing powdered materials into a hemispherical shape of uniforin density and wall thickness comprising a fcmale and male die element held in a stationary spaced relation with the space being equivalent to the wall thickness and defining the hemispherical shape, a pressing ring linearly moveable along the male die element, an inlet to fill the space with powdered materials, a guiding system for moving the pressing ring along the male die element so as to press the powdered material and a heating system for heating the male element so that the powdered material is heated while being pressed.

  9. Helgoland und die Erforschung der marinen Benthosalgen

    NASA Astrophysics Data System (ADS)

    Mollenhauer, D.; Lüning, K.

    1988-09-01

    Early phycological research on the island of Helgoland was performed by amateur phycologists from the adjacent coastal regions of Germany (Bremen, Hamburg, Lower Saxony and Schleswig-Holstein). These pioneers were followed by professionals, and by collectors from the mainland universities, particularly from Berlin. This second phase group includes the naturalist Christian Gottfried Ehrenberg, the zoologists Johannes Müller, Ernst Haeckel and Anton Dohrn, and the botanists Alexander Braun, Nathanael Pringsheim, and Ferdinand Cohn. The leading marine phycologist in Germany, towards the end of the 19th century, was Johannes Reinke, who finally worked at the University of Kiel. Paul Kuckuck's doctoral thesis had been supervised by Reinke who recommended him for the post of the first curator of botany at the Biological Station of Helgoland, which was founded in 1892. Kuckuck worked on the island from 1892 to 1914. After World War I, and after Kuckuck's untimely death, Wilhelm Nienburg became the second curator of botany on Helgoland, from 1921 to 1923. The next permanent phycologist on the island, from 1925 to 1936, was Ernst Schreiber. He was followed in 1936 by Peter Kornmann, who retired in 1972 but still continues as a research worker, together with Paul-Heinz Sahling, who started to work as a technical assistant under the guidance of Ernst Schreiber in 1927.

  10. Organe der Osmoregulation und Exkretion

    NASA Astrophysics Data System (ADS)

    Møbjerg, Nadja

    Die meisten Schädeltiere sind in der Lage, die Wasser- und Ionenkonzentration ihres Innenmilieus zu regulieren, sind also im Hinblick auf ihren Ionenhaushalt weitgehend unabhängig von der Umgebung. Sie halten die Konzentration von Wasser und anorganischen Ionen in ihren Körperflüssigkeiten (interstitielle Flüssigkeit und Blut) innerhalb enger Grenzen konstant (Osmoregulierer). Schleim aale (Myxinoida) können zwar die Konzentration einzelner anorganischer Ionen regulieren, sind aber insgesamt der hohen Osmolarität des Meerwassers angepasst, also isoosmostisch zu diesem. Isoosmotisch oder leic ht hyperosmostisch zur Umgebung sind auch marine Neoselachier und Latimeria chalumnae (Actinistia), die dazu organische Osmolyte (Harnstoff und Trimethylaminoxid) im Blut akkumulieren (Osmokonformer). Bei anderen aquatischen Schädeltieren sind die Körperflüssigkeiten zur Umgebung hypoosmotisch (im Meerwasser) — sie halten Wasser zurück und scheiden anorganiche Ionen aus — oder hyperosmotisch (im Süßwasser), indem sie Wasser abgeben und anorganische Ionen aufnehmen.

  11. Checkpoint-Inhibitoren in der Immuntherapie: Ein Meilenstein in der Behandlung des malignen Melanoms.

    PubMed

    Wilden, Sophia M; Lang, Berenice M; Mohr, Peter; Grabbe, Stephan

    2016-07-01

    Seit Jahrzehnten ist bekannt, dass Tumoren vom Immunsystem erkannt und zerstört werden können. Diese, vor allem in Tierversuchen gewonnene Erkenntnis konnte jedoch in der Vergangenheit nicht zum Nutzen unserer Patienten umgesetzt werden, da immunonkologische Therapieansätze in den letzten Jahrzehnten in der Anwendung beim Menschen stets versagt haben. Daher hat, mit Ausnahme der adjuvanten Interferontherapie, keines dieser Verfahren den Einzug in die klinische Versorgung gefunden. Langzeitüberleben unter guter Lebensqualität war dabei sehr wenigen Patienten vorbehalten. Mit den neuen immunologischen Therapieansätzen wird jedoch sowohl das Langzeitüberleben als auch die Lebensqualität onkologischer Patienten neu definiert. Auf die neuen "Immun-Checkpoint-Inhibitoren" spricht erstmals ein relevanter Teil der behandelten Patienten an und diese zeigen in der Regel langandauernde Remissionen bis hin zur Heilung. Schon jetzt ist klar, dass die Immuntherapie in Zukunft eine der wesentlichen Therapiesäulen bei der Behandlung des metastasierten Melanoms und auch vieler anderer fortgeschrittener Tumoren bilden wird. In dieser Übersicht werden die wichtigsten neuen Therapiemodalitäten besprochen und sowohl deren Wirkprinzip als auch klinische Daten zum Therapieansprechen und zu erwartenden Nebenwirkungen der Therapie referiert.

  12. Amplituden der Kernphasen im Bereich der Kaustik B und Untersuchung der Struktur der Übergangszone zum inneren Erdkern mit spektralen Amplituden der diffraktierten Phase PKP(BC)

    NASA Astrophysics Data System (ADS)

    Wolf, Michael D. C.

    2002-04-01

    Das Ziel dieser Arbeit ist es, die Strukturen im äueren Erdkern zu untersuchen und Rückschlüsse auf die sich daraus ergebenden Konsequenzen für geodynamische Modellvorstellungen zu ziehen. Die Untersuchung der Kernphasenkaustik B mit Hilfe einer kumulierten Amplituden-Entfernungskurve ist Gegenstand des ersten Teils. Dazu werden die absoluten Amplituden der PKP-Phasen im Entfernungsbereich von 142 ° bis 147 ° bestimmt und mit den Amplituden synthetischer Seismogramme verglichen. Als Datenmaterial dienen die Breitbandregistrierungen des Deutschen Seismologischen Re-gionalnetzes (GRSN 1 ) und des Arrays Gräfenberg (GRF). Die verwendeten Wellen-formen werden im WWSSN-SP-Frequenzbereich gefiltert. Als Datenbasis dienen vier Tiefherdbeben der Subduktionszone der Neuen Hebriden (Vanuatu Island) und vier Nuklearexplosionen, die auf dem Mururoa und Fangataufa Atoll im Südpazifik stattgefunden haben. Beide Regionen befinden sich vom Regionalnetz aus gesehen in einer Epizentraldistanz von ungefähr 145 °. Die Verwendung eines homogen instrumentierten Netzes von Detektoren und die Anwendung von Stations- und Magnitudenkorrekturen verringern den Hauptteil der Streuung bei den Amplitudenwerten. Dies gilt auch im Vergleich zu Untersuchungen von langperiodischen Amplituden im Bereich der Kernphasenkaustik (Häge, 1981). Ein weiterer Grund für die geringe Streuung ist die ausschlieliche Verwendung von Ereignissen mit kurzer impulsiver Herdzeitfunktion. Erst die geringe Streuung der Amplitudenwerte ermöglicht eine Interpretation der Daten. Die theoretischen Amplitudenkurven der untersuchten Erdmodelle zeigen im Bereich der Kaustik B einen gleichartigen Kurvenverlauf. Bei allen Berechnungen wird ein einheitliches Modell für die Güte der P- und S-Wellen verwendet, das sich aus den Q-Werten der Modelle CIT112 und PREM 2 zusammensetzt. Die mit diesem Q-Modell berechneten Amplituden liegen in geringem Mae oberhalb der gemessenen Amplituden. Dies braucht nicht ber

  13. Einsteins Spuren in den Archiven der Wissenschaft: Physikgeschichte

    NASA Astrophysics Data System (ADS)

    Marx, Werner

    2005-07-01

    Die Erwähnungen und Zitierungen von Einsteins Arbeiten dokumentieren lediglich den quantifizierbaren Anteil von Einsteins Beitrag zur Physik. Gleichwohl belegen sie die außergewöhnliche Resonanz und Langzeitwirkung seiner Arbeiten. Die Häufigkeit der Zitierungen entspricht nicht der allgemeinen Einschätzung ihrer Bedeutung. Insbesondere die Pionierarbeiten werden inzwischen als bekannt vorausgesetzt und nicht mehr explizit zitiert. Interessanterweise ist seine nach 1945 meist zitierte Arbeit nicht eine der Pionierarbeiten zur Quantenphysik oder Relativitätstheorie, sondern jene aus dem Jahr 1935 zum berühmten Einstein-Podolsky-Rosen-Paradoxon.

  14. Verbesserte Ausbildung für neue Betriebsleiter und -ingenieure - eine wichtige Investition in die Zukunft

    NASA Astrophysics Data System (ADS)

    Franta, Oliver

    Bedingt durch die Globalisierung und die damit einhergehende Verschärfung des Wettbewerbs befinden sich die Produktionsbetriebe der chemischen Industrie in stetigem Wandel. Für Betriebsleiter und Betriebsingenieure werden damit Fähigkeiten wie Kostenmanagement, Sozial- und Organisationskompetenz, Führungsqualifikationen und unternehmerisches Handeln immer wichtiger. Neben den Anforderungsprofilen bei Neueinstellungen ist dies auch bei der Fortbildung zu berücksichtigen. Das Trainingsprogramm der Evonik Degussa wurde daher durch die Konzeption neuer Seminare und die Anpassung bestehender Weiterbildungsmaßnahmen weiterentwickelt. Neben Vorträgen und Fallbeispielen sind ebenfalls die Durchführung von Planspielen sowie das Kennenlernen eines Produktionsbetriebes einer anderen Organisationseinheit enthalten. Ziel ist es vor allem die unternehmerische Orientierung neuer Betriebsleiter und -ingenieure zu fördern, die Innovationsgeschwindigkeit zu erhöhen und durch Kenntnis und Nutzung bereits anderweitig entwickelter Lösungen und Methoden die Produktivität zu steigern. Die Produktionsmeister werden aufgrund der Bedeutung dieser Funktion für die Führung der Mitarbeiter und bei der Umsetzung von Veränderungsprojekten in das Ausbildungsprogramm einbezogen. Der Erfolg des Trainingsprogramms zeigt sich an den Teilnehmerzahlen und den ausgesprochen positiven Rückmeldungen.

  15. Kanban - der Weg ist das Ziel

    NASA Astrophysics Data System (ADS)

    Aull, Florian; Berlak, Joachim; Dickmann, Eva; Dickmann, Philipp; Fischäder, Holm; Gerlach, Joachim; Henneberg, Jens; Kapalla, Klaus; Kress, Oliver; Kuttler, Robert; Schneider, Herfried M.; Schürle, Philipp; Stellpflug, Franz-Josef; Wannenwetsch, Ralph; Wulz, Johannes; Zäh, Michael F.

    Wenn man aktuell Produktionsbereiche in Deutschland und Europa besucht, fallen im Zusammenhang mit modernen Produktionsmethoden immer öfter die Begriffe Kanban (jap. Karte, Signal) und Pull-Produktion, und dies nicht ohne Stolz, da diese mit dem schillernden Vorbild des Toyota Produktionssystems in Zusammenhang stehen. Tatsächlich ist Kanban ein integraler Bestandteil moderner Produktionssysteme. Blickt man aber im Rahmen von Prozessanalysen hinter die Fassaden", d. h. in die tägliche Praxis der Arbeitsprozesse, wird man schnell desillusioniert - die viel gepriesenen klassischen Kanban-Regeln werden im Tagesgeschäft nicht eingehalten.

  16. Komplexität der Geographie

    NASA Astrophysics Data System (ADS)

    Diekert, Volker; Hertrampf, Ulrich

    Das allgemein als Prototyp eines PSPACE-vollständigen Spiels gesehene Geographiespiel wird bezüglich seiner Komplexität genauer untersucht. Das Interesse der theoretischen Informatik an diesem Spiel wurde sehr durch die Darstellung in dem Lehrbuch von Papadimitriou [Pap94] gefördert. Allerdings bestimmt dieses Lehrbuch nicht die Komplexität des Standardspiels sondern verwendet eine Verallgemeinerung. Die Aussage in dem Lehrbuch bleibt damit etwas unbefriedigend und hinter den Möglichkeiten. Wir zeigen hier, dass die komplexitätstheoretische Charakterisierung schon für die Standardvariante des Spiels gilt.

  17. Jahre Entwicklung der Instandhaltung - von der ausfallorientierten Instandhaltung zum gemeinsamen TPM und RCM

    NASA Astrophysics Data System (ADS)

    Iske, Friedhelm

    Zur Einleitung meines Beitrages möchte ich von einem Gespräch mit einem Mitarbeiter berichten, das ich als junger Vorgesetzter einer Instandhaltungsgruppe 1988 führte. Der engagierte Mitarbeiter feierte damals sein vierzigjähriges Dienstjubiläum und war stolz auf das von ihm Geleistete sowie auf den besonderen Einsatz seiner Altersgruppe, die nach dem Zweiten Weltkrieg das Werk wieder aufgebaut hatte. Auf meine Frage, was denn damals die erste Aufgabe in der Firma war, bekam ich kurz und knapp und mit einer Selbstverständlichkeit die selbstbewusste Antwort: "Unser Pferd füttern und mit dem Pferd die innerbetrieblichen Transporte erledigen“. Als junger, technisch orientierter Vorgesetzter war ich über diese Antwort sehr überrascht. Gedanklich weit entfernt war die Vorstellung, dass in der Vergangenheit Transporte mit einem Pferd erledigt wurden.

  18. Wer entdeckte die Allgemeine Relativitätstheorie? Prioritätsstreit zwischen Hilbert und Einstein

    NASA Astrophysics Data System (ADS)

    Sommer, Klaus P.

    2005-09-01

    Im November 1915 arbeiteten Albert Einstein und David Hilbert an den Feldgleichungen der Gravitationstheorie. Im Jahre 1997 behaupteten die Wissenschaftshistoriker Corry, Renn und Stachel in einer viel beachteten Arbeit, Hilbert habe die entscheidenden Formeln von Einstein gestohlen. Grundlage ihrer Argumentation war eine wieder gefundene Korrekturfahne von Hilberts entscheidender Arbeit. Die Physikhistorikerin Daniela Wuensch bringt jedoch detaillierte Argumente dafür vor, dass die entscheidende Quelle, nämlich die Korrekturfahne, in neuerer Zeit manipuliert worden ist, um Einsteins Priorität unangetastet zu lassen. Einstein bleibt aber der Entdecker der Allgemeinen Relativitätstheorie.

  19. Sichere Sprachkenntnisse als Grundlage fuer eine hoehere Qualitaet der Koennensentwicklung. 1 (Secure Language Knowledge as a Basis for a Higher Quality of Skill Development. 1)

    ERIC Educational Resources Information Center

    Guenther, Klaus

    1974-01-01

    Topics are: aspects in the systematic acquisition of firm, lasting and ready-to-use knowledge and skill as a basis of instruction; nature of language knowledge; the dialectic of knowledge acquisition and the development of skill; intensive learning; and the design of vocabulary drill units. (Text is in German.) (IFS/WGA)

  20. Vorausschauend Planen, Gezielt Handeln — Über Die Regelung Und Steuerung Technischer Prozesse

    NASA Astrophysics Data System (ADS)

    Grüne, Lars; Sager, Sebastian; Allgöwer, Frank; Bock, Hans Georg; Diehl, Moritz

    Seit Beginn der industriellen Revolution nimmt die Steuerungs- und Regelungstechnik eine Schlüsselstellung in vielen technischen Bereichen ein. James Watts Fliehkraftregler für Dampfmaschinen ist eines der frühen Beispiele eines extrem erfolgreichen Reglerkonzepts, von dem Ende der 1860er Jahre geschätzte 75000 Exemplare allein in England im Einsatz waren [2, S. 24]. Etwa um diese Zeit begannen Ingenieure, motiviert durch die immer höhere Komplexität der zu regelnden Maschinen, sich systematisch mit theoretischen Grundlagen der Regelung zu beschäftigen. Dies führte unausweichlich zu der Einsicht, dass das dynamische Verhalten der geregelten Systeme nur mit Hilfe der Mathematikverstanden und weiterentwickelt werden konnte, oder wie Werner von Siemens, ein weiterer technischer Pionier in diesem Bereich es formulierte: "Ohne Mathematik tappt man doch immer im Dunkeln.“

  1. Die Schokoladen-Diät

    NASA Astrophysics Data System (ADS)

    Ehrhardt, Matthias

    Schlankheitskuren sind einerseits ein soziales Phänomen, aber auch ein großer Zweig der Nahrungsmittelindustrie. Die Industrie bietet dabei verschiedene Produkte an, wie Diätlebensmittel, Nahrungsergänzungsmittel, Sportkleidung und -ausrüstung, Übungsvideos und -bücher, usw. Allerdings ist es bekanntermaßen sehr schwer, das einmal erreichte Wunschgewicht auch langfristig zu halten. Häufig tritt dabei der so genannte Jojo-Effekt auf, so dass man schließlich nach der Diät mehr wiegt als vorher.

  2. Kernschmelze Der nachhaltige Einfluss von Nuklearwaffen auf Politik und Wirtschaft

    NASA Astrophysics Data System (ADS)

    Greiner, Bernd

    "Was sollen wir von einer Kultur halten, der die Ethik stets als wesentliches Element des menschlichen Lebens galt, die aber - außer in fachlicher oder spieltheoretischer Terminologie - nicht in der Lage war, über die Möglichkeit zu sprechen, nahezu alle Menschen zu töten?" Der Fragesteller gehört zu den berühmtesten Physikern des 20. Jahrhunderts und zu den nach wie vor Umstrittensten. über ihn wurde in den 1960er Jahren ein international viel beachtetes Theaterstück geschrieben, vor wenigen Jahren gar eine Oper.

  3. Nanophysik: Wärmeübertrag auf der Nanometerskala

    NASA Astrophysics Data System (ADS)

    Kittel, Achim

    2006-01-01

    Gegen Ende des 19. Jahrhunderts waren die grundlegenden Prozesse des Wärmeaustauschs verstanden. Die Gesetze dienten dann als Grundlage für die Quantenmechanik. Doch gelten diese Gesetze auch auf der Nanometerskala? In den 1970er-Jahren wurde eine Theorie für den Wärmeübertrag im atomaren Bereich entwickelt. Physiker der Universität Oldenburg überprüften deren Vorhersagen und stießen dabei auf signifikante Abweichungen, welche auf einen Zusammenbruch der klassischen, makroskopischen Elektrodynamik hindeuten.

  4. Schönheit und andere Provokationen - Eine neue evolutionsbiologische Theorie der Kunst

    NASA Astrophysics Data System (ADS)

    Junker, Thomas

    Die Evolution hat viele spektakuläre Phänomene hervorgebracht - von der Eleganz des Vogelflugs über die gigantischen Körper der Dinosaurier und die farbenprächtige Vielfalt der Korallenriffe bis hin zu ihrem jüngsten Geniestreich - der menschlichen Kunst. Die schönen Künste - Malerei, Bildhauerei und Architektur, Theater, Tanz, Oper und Filmkunst, Musik und Literatur - Produkte der Evolution? Diese Vorstellung mutet vielen Menschen fremd an, aber wie könnte es anders sein? Denn wenn Charles Darwin recht hat, dann sind nicht nur die körperlichen Merkmale der Menschen als Antworten auf die Erfordernisse des Lebens entstanden, sondern auch ihre geistigen Fähigkeiten und Verhaltensweisen. Im Jahr 1859 hatte er auf den letzten Seiten seines berühmten Buches über die Entstehung der Arten eine kühne Prophezeiung gemacht: Durch die Evolutionstheorie werde es "zu einer bemerkenswerten Revolution in der Naturwissenschaft kommen […]. Die Psychologie wird auf die neue Grundlage gestellt, dass jede geistige Kraft und Fähigkeit notwendigerweise durch graduelle Übergänge erworben wird“ (Darwin 1859, S. 484, 488; Junker 2008).

  5. Networking as a Seismograph for Social Development. A Contribution to the Function Expansion of Networks Using the Example of Health Promotion of the Socially Disadvantaged (Netzwerkbildung als Seismograph gesellschaftlicher Entwicklungen: Ein Beitrag zur Funktionserweiterung von Netzwerken am Beispiel der Gesundheitsfoerderung von sozial Benachteiligten)

    DTIC Science & Technology

    2008-03-01

    vollzieht sich in den letzten Jahren Ober eine Vielzahl von Netzwerken, uber die sich unterschiedlichste Akteure miteinander verknQ~pft haben. In...indirekt, politische 2 Akteure zu adressieren und bisherige Handlungsdefizite der Gesundheitsf6rderung bei sozial Benachteiligten auch uber neue...klassischen Sinne der Korporatismusanalyse impliziert, sondern gar eine Form der Einwandvorwegnahme darsteilt. Auf der Grundlage der durch die bislang uber

  6. Regenerative Energieträger im Aufwind: Entwicklung der erneuerbaren Energien

    NASA Astrophysics Data System (ADS)

    Kohl, Harald

    2006-05-01

    2005 kam 4,6 % des deutschen Primär-Energieverbrauchs aus erneuerbaren Energiequellen, bei der Stromproduktion lag ihr Anteil bei 10,2 %. Wesentliche Ursache ist der Boom bei der Windkraft, die vor allem durch Offshore-Windparks auf See weiter ausbaubar ist. Die Wasserkraft lieferte in Deutschland traditionell einen großen Beitrag zur Stromerzeugung, doch ihr Ausbaupotenzial ist gering. Die Photovoltaik, die solar- und die geothermische Stromerzeugung spielen derzeit noch eine kleine Rolle. Den deutschen Bedarf an Wärmeenergie deckten 2004 die erneuerbaren Energien zu 5,4 %, vor allem aus Biomasse. Die solarthermische Wärmeerzeugung hat sich gegenüber 2000 mehr als verdoppelt. Im Straßenverkehr spielen biogene Kraftstoffe mit 5,4 % noch eine untergeordnete Rolle. Bis 2050 könnte in Deutschland der Anteil regenerativer Energien am Primär-Energieverbrauch die Fünfzigprozentmarke überschreiten.

  7. Implantate und Verfahren in der Augenheilkunde

    NASA Astrophysics Data System (ADS)

    Neuhann, Tobias H.

    Das in der Medizin mit am häufigsten verwendete Implantat weltweit ist die Intraokulare Linse (IOL). Die Gründe hierfür sind vielschichtig: einmal haben die Operationstechniken in den letzten 30 Jahren eine wesentliche Steigerung an Gleichmäßigkeit, Erfolg und Effizienz erfahren, zum anderen verursachen die gestiegenen Anforderungen des Alltags in den Industrienationen und im Berufsleben den höheren Anspruch an das Sehvermögen. Ist die menschliche Linse Ursache für schlechtes Sehvermögen, besteht meist eine Trübung des Linsenproteins. Diese Trübung nennt wird Volksmund Grauer Star genannt, wissenschaftlich die Katarakt (cataracta). Es gibt unterschiedliche Formen wie angeborene (congenita) oder erworbene, traumatische, krankheitsoder altersbedingte Formen [45]. Wird die eingetrübte Linse nun mittels moderner Operationsverfahren entfernt, muss für Ersatz dieses lichtbrechenden Mediums gesorgt werden [2].

  8. Die Kometen der Jahre 1531 bis 1539 und ihre Bedeutung fur die spatere Entwicklung der Kometenforschung

    NASA Astrophysics Data System (ADS)

    Kokott, Wolfgang

    The apparition of P/Halley in 1531 is known mostly for Peter Apian's statement of the antisolar direction of cometary tails and for Edmond Halley's discovery of its periodicity following its 1682 return. However, the 1531 event and the four comets of subsequent years are also remarkable for the first attempts, by several observers, to record and investigate their apparent orbits in a quantitative way with an accuracy making modern treatment feasible. Thus, the decade in question may be regarded as the beginning of modern cometary research. Within a broader historical context, the book outlines the significance of this series of comets w.r.t. the change of theory and observational practice prior to Tycho Brahe. It also documents the secondary sources throughout the following centuries and later attempts at interpreting the material. The possibilities inherent in the re-evaluation of historical observations by modern methods in the light of collateral evidence become transparent by means of the results of some recent orbit determinations.

  9. Kommunikationsanforderungen an verteilte Echtzeitsysteme in der Fertigungsautomatisierung

    NASA Astrophysics Data System (ADS)

    Just, Roman; Trsek, Henning

    Kommunikationssysteme der Automatisierung müssen hohe zeitliche Anforderungen erfüllen, damit die entsprechenden industriellen Anwendungen realisiert werden können. Im Gegensatz zum IT-Bereich sind diese Anforderungen jedoch häufig nicht genau bekannt, was insbesondere beim Einsatz von drahtlosen Technologien Probleme bereiten kann1. In dieser Arbeit werden Verkehrsmuster einer realen Anlage aus dem Bereich der Fertigungsautomatisierung bestimmt. Die Zwischenankunfts- und Latenzzeiten einzelner Sensorund Aktorsignale ermöglichen Rückschlüsse auf zeitliche Anforderungen und Charakteristiken der untersuchten Anwendung. Im Anschluss werden die erzielten Erkenntnisse hinsichtlich ausgewählter Kommunikationsanforderungen analysiert und aktuell gültige Anforderungen von realen Automatisierungsanlagen abgeleitet. Weiterhin werden sie zukünftig zur Entwicklung realitätsnaher Simulationsmodelle genutzt.

  10. Ein routine-integrierbares Planungswerkzeug zur operativen Rekonstruktion der Orbita

    NASA Astrophysics Data System (ADS)

    Kleiner, Melanie; Schulze, Dirk; Voss, Pit Jakob; Deserno, Thomas M.

    Bei Frakturen des Orbitabodens kann ein Titangitter zur Rekonstruktion operativ eingesetzt werden. In dieser Arbeit wird ein Planungswerkzeug entwickelt, welches mit Hilfe eines aktiven Konturmodells die Orbita in CT Daten segmentiert, ihr Volumen berechnet und visualisiert. Neben den technischen Integrationsstufen der Funktions- und Präsentationsintegration, welche durch den Einsatz des Medical Imaging Interaction Toolkit (MITK) erreicht werden, sowie der Daten-, und Kontextintegration ist vor allem die Stabilität der eingesetzten Algorithmik für die Routine-Integrierbarkeit wichtig. Erste Stabilitätsuntersuchungen basieren auf 3 von 100 zufällig ausgewählten CT-Datensätzen, wobei das Volumen mit je 50 verschiedenen Startpunkten berechnet wurde. Die so ermittelten Variationskoeffizienten liegen deutlich unterhalb der kritischen 5 % Schwelle.

  11. Kopplung eines auf der Momentenmethode basierenden Computerprogramms mit einem FEM-Algorithmus zur Berechnung von elektromagnetischen Streuproblemen im medizinischen Bereich

    NASA Astrophysics Data System (ADS)

    Schick, M.; Landstorfer, F. M.

    2004-05-01

    Am Beispiel der Verkopplung von medizinischen Geräten über den menschlichen Körper werden elektromagnetische Störphänomene im Klinikbereich betrachtet. Für die Berechnung dieser komplexen Szenarien wird zum einen die Momentenmethode (MoM) verwendet, die sich in besonderem Maße für die Berücksichtigung metallischer Strukturen und offener Streuprobleme eignet, und zum anderen die Methode der Finiten Elemente (FEM), mit der die Eigenschaften des menschlichen Körpers besser berücksichtigt werden können. Mit Hilfe des Äquivalenzprinzips lässt sich das Gesamtproblem in zwei Teile zerlegen, in ein inneres und in ein äußeres. Der Außenraum wird dabei mit der MoM behandelt und das Innere, d.h. der Körper mit der FEM. Die Kopplung der beiden Methoden erfolgt an der Körperoberfläche über äquivalente Oberflächenströme. Durch Lösen des resultierenden linearen Gleichungssystems für das gesamte Problem lassen sich dann die Oberflächenströme und die über die Kontinuitätsgleichung miteinander verknüpften elektromagnetischen Felder bestimmen.

  12. Der Begriff mathematischer Schönheit in einer empirisch informierten Ästhetik der Mathematik

    NASA Astrophysics Data System (ADS)

    Müller-Hill, Eva; Spies, Susanne

    Dieses Zitat des britischen Mathematikers G. H. Hardy bringt pointiert die unter praktizierenden Mathematikern, aber auch unter Philosophen der Mathematik weithin akzeptierte Ansicht zum Ausdruck, dass mathematische Schönheit eine nicht zu vernachlässigende Rolle in der mathematischen Forschungspraxis spielt und sowohl interessante ästhetiktheoretische, epistemische als auch ontologische Aspekte aufweist. Danach beeinflusst also das Verständnis dessen, was mathematische Schönheit ist, auch das Verständnis dessen, was Mathematik ist: "Was sind die Träger mathematischer Schönheit?" ist die Frage nach der Art der Gegenstände, für deren Schönheit Mathematiker sich begeistern und nach der sie streben. "Was sind die Kriterien für mathematische Schönheit?" ist die Frage nach den Kategorien, unter denen Mathematiker ihre Arbeit bewerten. Egal, ob sich das Phänomen mathematischer Schönheit als Ausnahmemerkmal oder als ständiger Begleiter mathematischen Tuns erweist - ein adäquates allgemeines Mathematikverständnis sollte dieses Phänomen berücksichtigen und bestenfalls auch erklären können.

  13. Evolutionäre Algorithmen zur Topologieentwicklung von Neuronalen Netzen für die Roboter-Navigation im praktischen Einsatz

    NASA Astrophysics Data System (ADS)

    Köpsel, T.; Noglik, A.; Pauli, J.

    Eine wichtige Frage in der mobilen Robotik ist die sichere Navigation in unbekannten Umgebungen unter der Anwendung preiswerter Sensorik. Solch eine Navigation kann ein künstliches Neuronales Netz (kNN) übernehmen, welches die Kopplung der Sensoren des Roboters mit dessen Antriebssystem herstellt. "Neuro Evolution of Augmenting Topologies“ (NEAT) von Stanley und Miikkulainen [1] verwendet den Evolutionären Ansatz sowohl für die Topologieentwicklung, als auch für die Bestimmung der Gewichte eines kNN. NEAT hat sich als sehr gut, anpassungsfähig und relativ einfach in der Anwendung gezeigt. In diesem Beitrag wird NEAT in der Simulation angewendet, um ein kNN, das die Navigation des Roboters übernimmt, zu erhalten. Der Fokus liegt dabei auf der Erstellung der Fitnessfunktion und die Spezifikation und Durchführung einer realitätstreuen Simulation für den praktischen Einsatz. Die enge Verknüpfung von Realität und Simulationswelt hat entscheidend dazu beigetragen, dass der Umstieg aus der Simulation in die reale Welt ein Erfolg (höhere Anpassungsfähigkeit) wird. Dieser Artikel basiert auf der Diplomarbeit von [2].

  14. Demographische Entwicklung in der Metropolregion Berlin-Brandenburg

    NASA Astrophysics Data System (ADS)

    Beyer, Wolf; Bluth, Friedrich

    〝Denn eins ist sicher: Die Rente.`` Der vielzitierte Satz des früheren Arbeits- und Sozialministers Norbert Blüm klingt heute vielen wie Hohn. Der Altersaufbau der deutschen Bevölkerung erinnert grafisch immer mehr an einen Baum auf dünnem Stämmchen als an eine Pyramide. Angesichts dessen rücken demographische Entwicklungen mehr und mehr in den Fokus der Öffentlichkeit. Besonders die neuen Bundesländer sind massiv von Abwanderung und einem nie dagewesenen Geburtenrückgang betroffen.DIPL.-GEOGR. UTE C. BAUERsprach mitFRIEDRICH BLUTHundWOLF BEYERüber die Besonderheiten der demographischen Prozesse in Berlin und Brandenburg. Beyer leitete bis Anfang 2004 das brandenburgische Referat für Raumbeobachtung. Seine Aufgabe bestand darin, Planungsgrundlagen für die Gemeinsame Landesplanung Berlin-Brandenburg(GL) zu schaffen. Dazu zählen auch Bevölkerungsprognosen für die Kreise und Städte Brandenburgs. Bluth ist in der Senatsverwaltung für Stadtentwicklung Berlin beschäftigt und leitet dort die Gruppe 〝Stadtwissen, Stadtentwicklungsmonitoring, Bevölkerungsprognose.``

  15. Datenkompression, Prozessoptimierung, Aerodynamik: Eine Tour Durch die Skalen

    NASA Astrophysics Data System (ADS)

    Dahmen, Wolfgang; Marquardt, Wolfgang

    Enorm gestiegene Rechnerkapazitäten ermutigen zu einer immer genaueren Erschließung komplexer Prozesse in Natur- und Ingenieurwissenschaften durch numerische Simulation. Die Mathematik als Schnittstelle zwischen realer und digitaler Welt liefert einerseits die Grundlagen zur Formulierung notwendigerweise vereinfachter Modelle der Realität. Andererseits bietet sie aber auch die methodischen Grundlagen für den Entwurf effizienter Algorithmen, die aus solchen Modellen quantitative Information gewinnen können. Eine zentrale Herausforderung liegt dabei in der Tatsache, dass reale Prozesse meist durch relevante Anteile auf einer riesigen Spannweite von Längenskalen getrieben werden. Die Entwicklung mathematischer Methoden zur Behandlung von Mehrskaligkeit ist daher von wesentlicher Bedeutung. In diesem Artikel wird dies anhand jüngster Entwicklungen in ganz unterschiedlichen Anwendungsbereichen erklärt und illustriert, auch um deutlich zu machen, wieviele "Fliegen“ man mit einer "mathematischen Klappe“ schlagen kann. Insbesondere werden grundlegende, auf Waveletzerlegung beruhende Prinzipien zunächst im Rahmen der Bildkompression und -kodierung auf weitgehend elementare Weise erklärt. Es wird dann aufgezeigt, dass diese Konzepte in ganz ähnlicher Weise bei der Datenanalyse im Zusammenhang mit verfahrenstechnischen Anwendungen, bei großskaligen Optimierungsproblemen der Prozessindustrie sowie bei komplexen Strömungsproblemen wie in aerodynamischen Anwendungen zum Tragen kommen. Stabile Zerlegungen in Anteile unterschiedlicher Längenskalen eröffnen dabei einen Zugang zu adaptiven Lösungskonzepten, die in der Lage sind, automatisch Rechnerresourcen dort zu plazieren, wo sie zu einer ökonomischen Realisierung der gewünschten Lösungsqualität, etwa in Form von Genauigkeitstoleranzen, benötigt werden.

  16. Web-gestütztes Social Networking am Beispiel der Plattform Wissensmanagement"

    NASA Astrophysics Data System (ADS)

    Lindstaedt, Stefanie; Thurner, Claudia

    Anhand der Plattform Wissensmanagement, der größten deutschsprachigen Community im Themenfeld Wissensmanagement, werden organisationale Rahmenbedingungen, technische Werkzeuge und Rollen der Moderatorin diskutiert, die Bedingungen für den erfolgreichen Betrieb einer Community im Web 2.0 sind. Weiters wird dargestellt, wie Communities für das betriebliche Wissensmanagement eingesetzt werden können.

  17. Modellierungskonzept für MOS Varaktoren zur Minimierung der AM-FM Konversion in VCOs

    NASA Astrophysics Data System (ADS)

    Peikert, T.; Bremer, J.-K.; Mathis, W.

    2010-10-01

    In dieser Arbeit wird ein analytisches Simulationsmodell für MOS Varaktoren zur Entwurfsunterstützung von integrierten CMOS LC-Tank VCO-Schaltungen präsentiert. Das analytische Simulationsmodell wurde auf Basis des EKV-Transistormodells implementiert und beinhaltet ausschließlich Design- und Prozessparameter für die Berechnung der Varaktorkapazität. Dieses Simulationsmodell ermöglicht es, die verwendeten Varaktoren im Vorfeld des VCO-Entwurfs zu dimensionieren, die effektive Großsignalkapazität in Abhängigkeit des Ausgangssignals zu berechnen und einzelne Eigenschaften der Varaktoren, wie z.B. das AM-FM Konversionsverhalten zu optimieren. Die Gültigkeit des vorgestellten analytischen Simulationsmodells zur Beschreibung der Varaktorkapazität in CMOS LC-Tank VCOs, wird anhand von Spectre (Cadence) Simulationen auf Basis eines 0.25 μm CMOS Prozesses der Firma IHP (SGB25) und eines 0.35 μm CMOS Prozesses der Firma AMS (C35) verifiziert. In this work an analytical simulation model for MOS varactors, that can be used in a systematically VCO design flow, is presented. The simulation model is based on the EKV transistor model and includes only design and process parameters of the used CMOS technology. The proposed simulation model allows calculating the required design parameters and the effective large signal capacitance of the varactors incorporated into the VCO as a function of the output signal of the VCO. Based on the expression for the effective large signal capacitance it is possible to optimize the AM-FM conversion behavior of the used varactors. The validity and accuracy of the simulation model is verified by Spectre simulations which are based on a 0.25 μm CMOS process (SGB25) from the company IHP and a 0.35 μm CMOS process (C35) from the company AMS. The simulation results show a good accordance in all transistor operating regions for NMOS varactors as well as PMOS varactors.

  18. Auf der Suche nach dem Codierungs-Gral für genetische Algorithmen

    NASA Astrophysics Data System (ADS)

    Weicker, Karsten

    Die umstrittene Frage nach dem "wichtigsten" Operator im genetischen Algorithmus - Mutation oder Crossover - hängt eng zusammen mit der Frage nach der richtigen binären Codierung. Gray- und standardbinärer Code bringen unterschiedliche Vor- und Nachteile in einen genetischen Algorithmus ein. Diese Arbeit beschäftigt sich mit der Suche nach einer Codierung, welche die Vorteile beider Codes vereinbart, und berichtet von einem Teilerfolg für mit 4 Bits encodierten Zahlen.

  19. Sputtered protective coatings for die casting dies

    NASA Technical Reports Server (NTRS)

    Mirtich, M. J.; Nieh, C. Y.; Wallace, J. F.

    1981-01-01

    This investigation determined whether selected ion beam sputtered coatings on H-13 die steel would have the potential of improving the thermal fatigue behavior of the steel used as a die in aluminum die casting. The coatings were selected to test candidate insulators and metals capable of providing protection of the die surface. The studies indicate that 1 micrometer thick W and Pt coatings reduced the thermal fatigue more than any other coating tested and are candidates to be used on a die surface to increase die life.

  20. Zellulare Nichtlineare Netzwerke: Anwendungen in der Informationstechnologie

    NASA Astrophysics Data System (ADS)

    Tetzlaff, R.

    2007-06-01

    Zellulare Nichtlineare Netzwerke (CNN) wurden 1988 von Chua und Yang (Chua und Yang, 1988) eingeführt. Diese Netzwerke sind dadurch gekennzeichnet, dass eine Zelle, die die kleinste Einheit eines CNN darstellt, nur mit Zellen innerhalb einer bestimmten Umgebung verbunden ist. üblicherweise sind Art und Stärke der Wechselwirkung zwischen zwei Zellen eines CNN translationsinvariant, d.h. sie hängen nur von der relativen Lage beider Zellen zueinander ab. Im Vordergrund aktueller Arbeiten stehen auf derartigen Netzwerken basierende schaltungstechnische Realisierungen mit bis zu 176x144 Zellen, die eine direkte Verbindung zu zweidimensionalen optischen Sensor-Anordnungen aufweisen. Über einen separaten Speicherbereich können die Zellkopplungen eines Netzwerks verändert werden, wodurch eine adaptive Verarbeitung von mehrdimensionalen Sensorsignalen ermöglicht wird. Das kürzlich vorgestellte so genannte EyeRis System (Anafocus Ltd.) enthält zusätzlich noch einen Standardprozessor und stellt (bei einer Größe vergleichbar mit der einer Kreditkarte) daher ein vollständiges superschnelles System zur Informationsverarbeitung dar. In diesem Beitrag sollen, nach einem kurzen Überblick über die Eigenschaften von CNN, aktuelle Realisierungen und exemplarisch eine neuere eigene Anwendung vorgestellt und besprochen werden.

  1. Vollautomatische Segmentierung der Prostata aus 3D-Ultraschallbildern

    NASA Astrophysics Data System (ADS)

    Heimann, Tobias; Simpfendörfer, Tobias; Baumhauer, Matthias; Meinzer, Hans-Peter

    Diese Arbeit beschreibt ein modellbasiertes Verfahren zur Segmentierung der Prostata aus 3D-Ultraschalldaten. Kern der Methode ist ein statistisches Formmodell, das auf Beispieldaten der Prostata trainiert wird. Erster Schritt der Segmentierung ist ein evolutionärer Algorithmus, mit dem das Modell grob im zu segmentierenden Bild positioniert wird. Für die darauf folgende lokale Suche wurden mehrere Varianten des Algorithmus evaluiert, unter anderem Ausreißer-Unterdrückung, freie Deformation und Gewichtung der verwendeten Erscheinungsmodelle nach ihrer Zuverlässigkeit. Alle Varianten wurden auf 35 Ultraschallbildern getestet und mit manuellen Referenzsegmentierungen verglichen. Die beste Variante erreichte eine durchschnittliche Oberflächenabweichung von 1.1 mm.

  2. Astronomen bei der Arbeit - Live-Konferenz mit La Palma

    NASA Astrophysics Data System (ADS)

    Beck, Paul G.

    2012-02-01

    "Wie kann man sich die nächtliche Arbeit eines Astronomen am Teleskop vorstellen?" Diese Frage stellen sich viele wissenschaftlich interessierte Menschen, die noch kein professionelles Observatorium besuchen konnten. Das multimediale Experiment "Call a Scientist" verband Besucher einer österreichischen Amateursternwarte live mit dem Großobservatorium in La Palma und brachte damit einer interessierten Öffentlichkeit seltene Einblicke in die Arbeitsweise der modernen Astronomie nahe.

  3. Herausforderungen für künftige Lernumgebungen am Beispiel der Fakultät für Medizin

    NASA Astrophysics Data System (ADS)

    Gergintchev, Ivan; Graf, Stephan

    Nach der weit reichenden Etablierung von eLearning in den letzten Jahren stehen nahezu alle deutschen Hochschulen vor der Aufgabe, wettbewerbsfähige hochschulübergreifende Mechanismen sowie entsprechende organisatorische Rahmenbedingungen zu schaffen. Vor allem die Umsetzung von EBologna und die Unterstützung kooperativer Bildungsangebote verstärken diese Notwendigkeit. Motiviert durch die Veränderungen im Bereich der Hochschullehre und die Herausforderungen für künftige Lernumgebungen schlagen wir eine Integrationslösung im Sinne eines Learning Gateway vor, die zur webgestützten Abwicklung von kooperativen Bildungsangeboten in heterogen Lernumgebungen eingesetzt werden kann. Ihre Praxisanwendung verdeutlichen wir anschließend im komplexen Szenario der Medizin an der TUM. Die Evaluierung der Umsetzung belegt den deutlichen Mehrwert des Ansatzes.

  4. Auf dem Weg zu einem neuen Weltcurriculum? Zum Grundbildungskonzept von PISA und der Aufgabenzuweisung an die Schule (Towards a World Curriculum? -- The Concept of Basic Education (Literacy) underlying PISA and the tasks allocated to Schooling).

    ERIC Educational Resources Information Center

    Fuchs, Hans-Werner

    2003-01-01

    Recognizes that the debate on the Program for International Student Assessment 2000 (PISA) has been dominated by comparisons of the ranks achieved and by the question of the consequences to be drawn from the results. Discusses the educational concept forming the basis for the investigation and aims of PISA. (CAJ)

  5. Approximation dreidimensionaler Oberflächenmodelle der Lippen-Kiefer-Gaumen-Region durch aktive Polygonnetze

    NASA Astrophysics Data System (ADS)

    Weichert, Frank; Ewerlin, Christoph; Büttner, Christian; Shamaa, Ali; Landes, Constantin; Linder, Roland; Wagner, Mathias

    In dieser Arbeit wird ein Verfahren zur Rekonstruktion eines dreidimensionalen Oberflächenmodells aus Serienschnitten vorgestellt, die sich von Lippen-Kiefer-Gaumenspalten (kurz LKG) ableiten und insbesondere die in der chirurgischen Behandlung relevanten medizinischen Strukturen berücksichtigen. Die Intention ist, ein aktives Polygonnetz (deformierbares Oberflächennetz) zur Rekonstruktion der Struktur zu verwenden. Initial wird ein Netzprototyp als grobe Approximation der Struktur erstellt und dann mithilfe eines Gradient Vector Flow (GVF)-Kraftfeldes deformiert. Inhärenter Aspekt der Deformation ist die Beachtung eines resultierenden überschneidungsfreien Oberflächennetzes. Die rekonstruierte Oberfläche eignet sich aufgrund ausgezeichneter Eigenschaften als Eingabe für eine Kräftesimulation mittels Finite-Elemente-Methoden.

  6. Der Telemanipulator daVinci als mechanisches Trackingsystem

    NASA Astrophysics Data System (ADS)

    Käst, Johannes; Neuhaus, Jochen; Nickel, Felix; Kenngott, Hannes; Engel, Markus; Short, Elaine; Reiter, Michael; Meinzer, Hans-Peter; Maier-Hein, Lena

    Der Telemanipulator daVinci (Intuitive Surgical, Sunnyvale, Kalifornien) ist ein M aster-Slave System für roboterassistierte minimalinvasive Chirurgie. Da er über integrierte Gelenksensoren verfügt, kann er unter Verwendung der daVinci-API als mechanisches Trackingsystem verwendet werden. In dieser Arbeit evaluieren wir die Präzision und Genauigkeit eines daVinci mit Hilfe eines Genauigkeitsphantoms mit bekannten Maßen. Der ermittelte Positionierungsfehler liegt in der Größenordnung von 6 mm und ist somit für einen Großteil der medizinischen Fragestellungen zu hoch. Zur Reduktion des Fehlers schlagen wir daher eine Kalibrierung der Gelenksensoren vor.

  7. Unterstützung der IT-Service-Management-Prozesse an der Technischen Universität München durch eine Configuration-Management-Database

    NASA Astrophysics Data System (ADS)

    Knittl, Silvia

    Hochschulprozesse in Lehre und Verwaltung erfordern durch die steigende Integration und IT-Unterstützung ein sogenanntes Business Alignment der IT und damit auch ein professionelleres IT-Service-Management (ITSM). Die IT Infrastructure Library (ITIL) mit ihrer Beschreibung von in der Praxis bewährten Prozessen hat sich zum de-facto Standard im ITSM etabliert. Ein solcher Prozess ist das Konfigurationsmanagement. Es bildet die IT-Infrastruktur als Konfigurationselemente und deren Beziehungen in einem Werkzeug, genannt Configuration Management Database (CMDB), ab und unterstützt so das ITSM. Dieser Bericht beschreibt die Erfahrungen mit der prototypischen Einführung einer CMDB an der Technischen Universität München.

  8. Workflow-Management für organisationsübergreifende Datenübertragung am Beispiel des E-Learning-Systems der TUM

    NASA Astrophysics Data System (ADS)

    Boursas, Latifa

    In diesem Paper werden im ersten Schritt die Voraussetzungen und Anforderungen für Workflow-Management zur Bereitstellung einer organisationsübergreifenden Datenübertragung ausgeführt. Weiter werden auf einfache Art und Weise die Grundlagen des Identity Managements (IDM) und der Provisionierung von Zielsystemen erläutert sowie die technischen Lösungsideen für die genannten Anforderungen eingeführt. Am Beispiel des E-Learning-Systems der TU München zeigen wir zwei Lösungsansätze. Zu jedem Lösungsansatz werden die technischen Workflows genauer betrachtet und der Funktionsumfang erläutert. Ein paar Uses Cases bei den Datenkonvertierungen, die sich auf die verschiedenen Identity-Management-Schnittstellen beziehen werden auch präsentiert. Am Ende schließt ein Vergleich der beiden Lösungsansätze die Analyse ab.

  9. Berechnung der auftretenden lokalen Kräfte auf der magnetischen Beschichtung eines magnetischen Rasterkraftmikroskops

    NASA Astrophysics Data System (ADS)

    Preisner, T.; Mathis, W.

    2009-05-01

    Die numerische Berechnung entstehender Kraftwirkungen auf Körper aufgrund magnetischer Wechselwirkungen zwischen diesen, ist in Bezug auf die mechanische Deformation dieser Körper ein noch nicht vollständig gelöstes Problem. In dieser Arbeit wird ein Vergleich vorhandener Kraftberechnungsmethoden hinsichtlich der totalen Kraft anhand eines analytisch berechenbaren Beispiels vorgestellt, sowie Unterschiede der lokalen Kraftdichten dieser Methoden in Anwendung auf die magnetische Beschichtung eines magnetischen Rasterkraftmikroskops aufgezeigt. Due to magnetic interactions between magnetic field inducing bodies, force effects occur on the materials. The numerical computation of those occuring forces with respect to a subsequent structural analysis of a deformable material is still a topic of interest in research. In this paper a comparison between several existent force calculation methods regarding the total force is given for an example with two magnetic cubes. Furthermore, differences are shown concerning the local force densities on the magnetic coating of a magnetic force microscope.

  10. Molekulare Methoden zum Nachweis, zur Quantifizierung und zum Monitoring der Mykotoxinbildung lebensmittelrelevanter Pilze

    NASA Astrophysics Data System (ADS)

    Geisen, Rolf

    Schimmelpilze kommen ubiquitär vor und spielen besonders bei pflanzlichen Lebensmitteln und Rohprodukten eine besondere Rolle als Verderbsorganismen. Es wird geschätzt, dass 20-25 % der jährlichen Produktion an pflanzlichen Produkten durch Schimmelpilze verdorben werden (Smith et al., 1994). Viele der lebensmittelrelevanten Schimmelpilze sind zudem in der Lage, Mykotoxine, toxische Sekundärmetabolite, zu bilden, was das Ausmaß des Problems deutlich macht. Die wichtigsten mykotoxinbildenden Spezies gehören zu den Fusarien (Trichothecene, Fumonisine, Zearalenon), Aspergillen (Aflatoxin, Ochratoxin, Cyclopiazonsäure) und Penicillien (Patulin, Ochratoxin). Für viele Mykotoxine, wie die Aflatoxine, Ochratoxin, Fumonisine und Trichothecene sind Grenzwerte erlassen worden, die die Verkehrsfähigkeit betroffener Produkte regeln. Die Einhaltung der Grenzwerte kann sehr genau durch offizielle chemisch-analytische Methoden, wie HPLC, GC-MS etc. kontrolliert werden. Diese analytischen Methoden sind aber für die Anwendung eines HACCP-Ansatzes zur Kontrolle der Mykotoxinbildung nur bedingt geeignet, da sie Endpunktkontrollen darstellen und nur das über eine längere Zeit gebildete Mykotoxin bestimmen. Sie sagen daher nichts über die biologischen Bedingungen zur Zeit der Bildung durch den Pilz aus.

  11. Untersuchung der Störwirkung von LTE auf SRD Anwendungen bei 868 MHz

    NASA Astrophysics Data System (ADS)

    Welpot, M.; Wunderlich, S.; Gaspard, I.

    2014-11-01

    Moderne Hausautomatisierungssysteme, Alarmanlagen oder auch Funk-Zugangssysteme in Haus und Automobil setzen auf frei nutzbare Frequenzen in ISM/SRD-Bändern. Die rasante Zunahme an privaten und kommerziell genutzten Applikationen im SRD-Band bei 868 MHz und der Ausbau der LTE-Mobilfunknetze im Frequenzbereich unterhalb von 1 GHz ("Digital Dividend") wirft zunehmend die Frage nach der Funkverträglichkeit dieser Systeme untereinander auf. Während die SRD-Funkmodule auf eine geringe Sendeleistung von ~ +14 dBm beschränkt sind (Ralf and Thomas, 2009), beträgt die maximale LTE-Sendeleistung im Uplink nach (ETSI-Norm, 2011) +23 dBm. Zusammen mit der Einführung von LTE im Frequenzbereich unterhalb 1 GHz als DSL-Ersatz vor allem in ländlichen Gebieten, ergibt sich damit als mögliches Störszenario, dass durch die Aussendung des LTE-Endgerätes im Bereich von ca. 850 MHz die SRD-Funkverbindungen bei 868 MHz insbesondere dann gestört werden, wenn die Antennen beider Funksysteme räumlich nahe zueinander angeordnet sind und folglich nur eine geringe zusätzliche Entkopplung der Systeme bieten. In der vorliegenden Arbeit wird das LTE-Störpotential auf SRD-Empfänger praxisnah untersucht.

  12. Analyse unterschiedlicher Modellierungsvarianten des "Direct Power Injection" Verfahrens für die EMV Charakterisierung integrierter Schaltungen

    NASA Astrophysics Data System (ADS)

    Stürmer, U.; Ritzmann, S.; Jovic, O.; Wilkening, W.

    2009-05-01

    Dieser Beitrag analysiert zwei Ansätze zur Modellierung eines Teststandes zur Charakterisierung von integrierten Schaltungen mittels Direct Power Injection (DPI) auf einem Wafer. Die erste Variante ist zur Analyse bereits vorliegender integrierter Schaltungen nutzbar. Sie benötigt gemessene S-Parameterdaten, mit denen die an einem realen Messobjekt anliegenden Störspannungen frequenzabhängig bestimmt werden können. Die zweite Variante ist bereits anwendbar, bevor Silizium gefertigt worden ist. Sie modelliert einen Netzwerkanalysatorkanal der aus einer Signalquelle, einem Leistungsmesser und einem Verstärker mit nachgeschaltetem Richtkoppler und Entkoppelnetzwerken besteht. Zunächst werden die oben genannten verschiedenen Varianten der DPI-Streckenmodellierung dargestellt. Sie werden miteinander und anhand von Messdaten einer einfachen Teststruktur verglichen. Die Teststruktur besteht aus einem MOS-Transistor mit Arbeitswiderstand. Der Beitrag diskutiert Vor- und Nachteile der Varianten einschließlich Modellierungsaufwand und Simulationsgeschwindigkeit.

  13. “&ldots;how the right technique emerged at the right time” Zur Geschichte der fotografischen Methode im Kalten Krieg

    NASA Astrophysics Data System (ADS)

    Fengler, Silke

    Die Frühgeschichte der fotografischen Methode, die als Nachweisinstrument kernphysikalischer und kosmischer Strahlung in den 1950er Jahren zur Blüte kam, hat das Interesse vieler Wissenschaftshistoriker gefunden. Peter Galison hat gezeigt, wie fragil das Experimentalsystem lange Zeit war, das sich um die Methode bildete, und wie prekär die mit ihr aufgezeichneten Ergebnisse.

  14. Displaced capillary dies

    DOEpatents

    Kalejs, Juris P.; Chalmers, Bruce; Surek, Thomas

    1984-01-01

    An asymmetrical shaped capillary die made exclusively of graphite is used to grow silicon ribbon which is capable of being made into solar cells that are more efficient than cells produced from ribbon made using a symmetrically shaped die.

  15. Displaced capillary dies

    DOEpatents

    Kalejs, Juris P.; Chalmers, Bruce; Surek, Thomas

    1982-01-01

    An asymmetrical shaped capillary die made exclusively of graphite is used to grow silicon ribbon which is capable of being made into solar cells that are more efficient than cells produced from ribbon made using a symmetrically shaped die.

  16. Melker Meilensteine auf dem Weg in ein naturwissenschaftliches Zeitalter - Glanzlichter der Ausstellung zum Internationalen Astronomiejahr 2009 in der Melker Stiftsbibliothek.

    NASA Astrophysics Data System (ADS)

    Beck, Paul G.; Zotti, Georg

    2009-06-01

    Das Mittelalter wird weithin als die dunkle Epoche in der Geschichte der Europäischen Wissenschaften betrachtet, und insbesondere das Leben in den Klöstern galt lange Zeit als frei von jeglichem Interesse für Naturwissenschaften abseits der Medizin. Im Mittelalter galt die Astronomie bloß als Mittel zum Zweck, um religiöse und zivile Kalender erstellen zu können. Durch den Bestand der Handschriftenkammer der Melker Stiftsbibliothek eröffnet sich uns eine neue Sichtweise auf das gegen Ende des Mittelalters wachsende Interesse an den Naturwissenschaften. Dies wurde durch die starke Aufwertung der Klosterbibliothek im Rahmen der 'Melker Reform' im 15. Jahrhundert noch weiter verstärkt. Diese Epoche fällt mit der Frühphase der Universität Wien und der 'ersten Wiener Schule der Astronomie' zusammen. Dieser Artikel beleuchtet ausgewählte astronomischen Werke in der Melker Stiftsbibliothek zwischen dem frühen 9 und dem 18. Jahrhundert. Einen Schwerpunkt stellt das Wirken der Wiener Schule der Astronomie dar, wobei wir u.a. die Melker Abschrift von Peuerbachs Gutachten über den Kometen von 1456 sowie die im Stift Melk durchgeführte Beobachtung der Mondfinsternis von 1457 durch Regiomontanus und Peuerbach beleuchten. Dieser Beitrag ist der einführende Übersichtsartikel zum Ausstellungsprojekt in der Melker Stiftsbibliothek im Rahmen des Internationalen Jahres der Astronomie 2009. The medieval period is commonly seen as a dark epoch for science in Europe. Especially monasteries were seen as institutions without interest in natural sciences except for medicine. Astronomy was allegedly only a tool to construct religious and civil calendars. The inventory of the medieval manuscript collection of the library of the Abbey of Melk allows a new view on the growing interest in the exact sciences towards the end of the medieval ages. This interest was intensified through the increased importance of the monastery library due to the monastery reform

  17. The Ambiguous Dying Syndrome

    ERIC Educational Resources Information Center

    Bern-Klug, Mercedes

    2004-01-01

    More than one-half of the 2.4 million deaths that will occur in the United States in 2004 will be immediately preceded by a time in which the likelihood of dying can best be described as "ambiguous." Many people die without ever being considered "dying" or "at the end of life." These people may miss out on the…

  18. Die Tabellen von Ulugh Beg. Die Sternkataloge des Ptolemäus, Ulugh Beg und Tycho Brahe im Vergleich

    NASA Astrophysics Data System (ADS)

    Schwan, Heiner

    2002-09-01

    Im 15. Jahrhundert schuf Ulugh Beg, der Herrscher von Samarkand (1394 - 1449), ein wichtiges Tabellenwerk. Das Kernstück dieses Werks (Zij Ulugh Beg, "Tabellen Ulugh Begs") ist ein Katalog mit 1018 Sternen, ihren Helligkeiten und Positionen. In diesem Bericht werden die Zij Ulugh Beg mit den großen Katalogen von Ptolemäus und Tycho Brahe verglichen.

  19. Die Welt des Herrn Kuhn

    NASA Astrophysics Data System (ADS)

    Kern, Daniela

    Eines Morgens erwachte Herr Kuhn fröstelnd und staunte darüber, dass es in seinerWohnung eiskalt war. Dennoch quälte er sich aus seiner kuscheligen Bettdecke heraus und schlurfte ins Bad. "Hoffentlich wird wenigstens das Wasser warm", dachte er sich, als er den Wasserhahn betätigte - aber es kam nicht nur kein warmesWasser, außer einem unheilvollen Gluckser kam gar nichts aus der Leitung. "Dann werde ich wohl mal den Klempner anrufen", sprach er sich leise in den Bart und griff zu seinem Handy - doch das Netz war tot! Herr Kuhn begann nun, sich ernsthaft Sorgen zu machen, "Oje, was ist denn heute nur los? Ist irgendetwas Schlimmes passiert?" Um einen besseren Überblick über die Lage zu bekommen und sich austauschen zu können, brannte er nun förmlich darauf, rauszugehen und zur Arbeit zu fahren. An anderen Tagen, die er frisch geduscht und mit Kaffee und Marmeladen-Brot begann, war er selten so motiviert. So ging er also nun mit leerem Magen aus dem Haus. Hätte er den Versuch unternommen, sein tägliches Marmeladenbrot zuzubereiten, und dafür den Kühlschrank geöffnet, um das Marmeladenglas herauszunehmen, wäre ihm aufgefallen, dass auch die Stromversorgung Störungen unterworfen war, unschön zu erkennen an den ersten grünen, felligen Inseln auf seinem Lieblingskäse.

  20. HIGH PRESSURE DIES

    DOEpatents

    Wilson, W.B.

    1960-05-31

    A press was invented for subjecting specimens of bismuth, urania, yttria, or thoria to high pressures and temperatures. The press comprises die parts enclosing a space in which is placed an electric heater thermally insulated from the die parts so as not to damage them by heat. The die parts comprise two opposed inner frustoconical parts and an outer part having a double frustoconical recess receiving the inner parts. The die space decreases in size as the inner die parts move toward one another against the outer part and the inner parts, though very hard, do not fracture because of the mode of support provided by the outer part.

  1. Systemlieferant und OEM Hersteller für die Medizintechnik und Pharmabranche

    NASA Astrophysics Data System (ADS)

    Jakob, Thomas; Reichenberger, Robert

    Unter einem Original Equipment Manufacturer (OEM) versteht man einen Hersteller fertiger Komponenten oder Produkte, der diese in seinen eigenen Produktionsfabriken produziert, sie aber anschließend nicht selbst in den Handel bringt. Die Anforderungen an einen OEM für die Medizintechnik- und Pharmabranche sind weitaus komplexer und umfangreicher als in anderen Branchen. Diese zusätzlichen Anforderungen haben schließlich auch ihre Berechtigung, da es letztendlich immer um die Gesundheit und das Leben von Menschen geht. Ein OEM muss neben der heute immer stärker geforderten Flexibilität, Schnelligkeit und Wettbewerbsfähigkeit sämtliche für die Medizintechnik- und Pharmabranche erforderlichen Qualitäts- und Prozesssicherheitskriterien erfüllen. Entsprechende Nachweise sind durch regelmäßige Kunden- und Überwachungsaudits zu erbringen. Das Arbeitsumfeld eines OEM für die Medizintechnik- und Pharmabranche bezieht sich somit nicht nur auf die Herstellung der Produkte für seine Kunden, sondern auch auf die Einhaltung sämtlicher Normen, Sicherheitskriterien, regulatorischen Voraussetzungen und Gesetze die zur Herstellung der Produkte notwendig sind.

  2. Neue biosensorische Prinzipien für die Hämoglobin-A1c Bestimmung

    NASA Astrophysics Data System (ADS)

    Stöllner, Daniela

    2002-06-01

    Fructosyl-Valin-Histidin-Leucin-Threonin-Prolin (glkPP) als Kompetitor und Affinitätsligand immobilisiert und so eine regenerierfähige Oberfläche geschaffen. Beim Sandwich-Immunoassay wurde im ersten Schritt Gesamt-Hämoglobin an die mit Haptoglobin (Hp) modifizierte Festphase angereichert und im zweiten Schritt der gebundene HbA1c-Anteil nachgewiesen. Für die Konstruktion des HbA1c-Immunosensors wurden Affinitätsmatrizen durch Modifizierung von Cellulose-Dialysemembranen mit glkPP bzw. Hp hergestellt. Grundlegend studiert wurde die Aktivierung der Cellulose-Membranen mit 1,1'-Carbonyldiimidazol (CDI) und 1-Cyano-4-dimethylaminopyridintetrafluoroborat (CDAP) als Aktivierungsagenzien. Eine gerichtete Immobilisierung der Liganden wurde realisiert, indem glkPP über dessen C-Terminus (einzige Carboxylatgruppe) und Hp über dessen periodat-oxidiertem Kohlenhydratrest an die amino- oder hydrazidfunktionalisierte Membranen kovalent gekoppelt wurden. Mit dem Einsatz der glkPP- und Hp-modifizierten Membranen in der elektrochemischen Messzelle war erstmalig der biosensorische Nachweis von HbA1c möglich. Als Transduktor diente eine Pt-Elektrode, an der das von der GOD generierte H2O2 umgesetzt und ein mit der HbA1c-Konzentration korrelierendes Stromsignal erzeugt wurde. Die Immunosensoren zeigten Ansprechzeiten von 3 s. Mit dem Immunosensor auf Basis des indirekt-kompetitiven Testprinzips wurde eine Kalibrationskurve für HbA1c im Bereich von 0,25-30 µg/ml (3,9-465 nM, CV 3-9 %) mit Assayzeiten von 60 min und mit dem Immunosensor im Sandwich-Format eine Kalibrationskurve im Bereich von 0,5-5 µg/ml (7,8-78 nM; 5-50 % HbA1c vom Gesamt-Hb, CV 6-10 %, 3 h) aufgenommen. Hemoglobin-A1c (HbA1c) is a hemoglobin subtype formed by non-enzymatic reaction of glucose with the N-terminus of the beta-polypeptide chains. As it reflects the glycemic status of diabetics over the preceding 8-12 weeks, the determination of HbA1c has become an established procedure in the management of diabetes

  3. Die Quantenwelt - unbestimmt und nichtlokal?: Interpretation verschränkter Zustände

    NASA Astrophysics Data System (ADS)

    Fink, Helmut

    2004-07-01

    Das aufblühende Gebiet der Quanteninformationsverarbeitung belebt die alte Frage, wie das Phänomen der quantenphysikalischen Verschränktheit zu interpretieren sei. Besonders das berühmte Gedankenexperiment von Einstein, Podolsky und Rosen rückt wieder in das Zentrum der Aufmerksamkeit, seit Laborexperimente an verschränkten Quantensystemen durchgeführt werden, deren Teile räumlich weit von einander entfernt sind. Kann ein Teil eines solchen verschränkten Systems mit Überlichtgeschwindigkeit spüren, dass an einem weit entfernten anderen Teil gemessen wird? Hinter dieser Frage steckt die Vorstellung, es gebe einen nichtlokalen Mechanismus in der Natur. Diese Vorstellung erweist sich jedoch als keineswegs zwingend und sogar als irreführend, wenn man akzeptiert, dass die Werte von Beobachtungsgrößen in Quantenzuständen objektiv unbestimmt sind. Sie entstehen erst dort, wo wirklich gemessen wird.

  4. Increasing Pragmatic Awareness: Die Vagheit der Sprache "und so"

    ERIC Educational Resources Information Center

    Overstreet, Maryann; Tran, Jennie; Zietze, Sylvia

    2006-01-01

    This article presents a description of some pragmatic expressions ("oder so," "und so," "oder wie") rarely found in textbooks, but common in everyday conversation. Though often treated as vague or superfluous, these expressions perform important functions in interpersonal communication. Focusing on these easily identifiable phrases can help…

  5. Einsatz einer Echtzeit-Publish/Subscribe-Kommunikation für die Teleoperation mobiler Roboter

    NASA Astrophysics Data System (ADS)

    Lindhorst, Timo; Herms, André; Schulze, Michael

    In der Telerobotik werden mobile Roboter über ein Kommunikationsnetz durch einen Operator ferngesteuert. Um interaktiv zu operieren, mussen Daten in beide Richtungen in Echtzeit kommuniziert werden. Zusätzlich ist eine hohe Ausfallsicherheit des Systems zu gewährleisten. Diese Arbeit beschreibt die Umsetzung ernes solchen Szenarios unter Verwendung einer Echtzeit-Publish/Subscribe-Kommunikation. Ein drahtloses Mesh-Netzwerk erfüllt durch redundante Verbindungen die Anforderungen an die Kommunikation. Eine Publish/Subscribe-Middleware ermöglicht eine inhaltsbasierte Kommunikation und erlaubt dadurch eine hohe Flexibilität der Teilnehmer. Durch die modulare Software-Architektur der Applikationen entsteht ein verteiltes System, in dem mobile Roboter durch netzwerktransparente Kommunikation gesteuert werden.

  6. Die singulation method

    DOEpatents

    Swiler, Thomas P.; Garcia, Ernest J.; Francis, Kathryn M.

    2013-06-11

    A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with an HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

  7. Die singulation method

    DOEpatents

    Swiler, Thomas P [Albuquerque, NM; Garcia, Ernest J [Albuquerque, NM; Francis, Kathryn M [Rio Rancho, NM

    2014-01-07

    A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with a HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

  8. Sputtered protective coatings for die casting dies

    NASA Technical Reports Server (NTRS)

    Mirtich, M. J.; Nieh, C.-Y.; Wallace, J. F.

    1981-01-01

    Three experimental research designs investigating candidate materials and processes involved in protective die surface coating procedures by sputter deposition, using ion beam technologies, are discussed. Various pre-test results show that none of the coatings remained completely intact for 15,000 test cycles. The longest lifetime was observed for coatings such as tungsten, platinum, and molybdenum which reduced thermal fatigue, but exhibited oxidation and suppressed crack initiation only as long as the coating did not fracture. Final test results confirmed earlier findings and coatings with Pt and W proved to be the candidate materials to be used on a die surface to increase die life. In the W-coated specimens, which remained intact on the surface after thermal fatigue testing, no oxidation was found under the coating, although a few cracks formed on the surface where the coating broke down. Further research is planned.

  9. Extrusion die and method

    DOEpatents

    Lipp, G. Daniel

    1994-04-26

    A method and die apparatus for manufacturing a honeycomb body of rhombic cell cross-section by extrusion through an extrusion die of triangular cell discharge slot configuration, the die incorporating feedholes at selected slot intersections only, such that slot segments communicating directly with the feedholes discharge web material and slot segments not so connected do not discharge web material, whereby a rhombic cell cross-section in the extruded body is provided.

  10. The Angry Dying Patient.

    PubMed

    Houston, Robert E.

    1999-02-01

    Over 25 years ago, Kubler-Ross identified anger as a predictable part of the dying process. When the dying patient becomes angry in the clinical setting, all types of communication become strained. Physicians can help the angry dying patient through this difficult time by using 10 rules of engagement. When physicians engage and empathize with these patients, they improve the patient's response to pain and they reduce patient suffering. When physicians educate patients on their normal responses to dying and enlist them in the process of family reconciliation, they can impact the end-of-life experience in a positive way.

  11. Mit Mathematik zu Mehr Intelligenz in der Logistik

    NASA Astrophysics Data System (ADS)

    Möhring, Rolf H.; Schenk, Michael

    Die Lösung logistischer Probleme ist ein wichtiger Aspekt menschlichen Handelns seit Menschen gemeinsam zielgerichtet tätig wurden. Die Grundlagen dessen, was wir heute Logistik nennen, entstammen dem militärischen Bereich. So basierte z. B. das römische Imperium in starkem Maße auf militärisch-logistischen Glanzleistungen. Ob damals bereits mathematische Überlegungen eine Rolle spielten, wissen wir heute nicht. Jedoch versuchte z. B. Napoleon, der mit den bedeutendsten Mathematikern seiner Zeit befreundet war, den Transport seiner Truppen und die Verbreitung von Informationen zu optimieren und strategisch einzusetzen.1,2

  12. Die Soldering in Aluminium Die Casting

    SciTech Connect

    Han, Q.; Kenik, E.A.; Viswanathan, S.

    2000-03-15

    Two types of tests, dipping tests and dip-coating tests were carried out on small steel cylinders using pure aluminum and 380 alloy to investigate the mechanism of die soldering during aluminum die casting. Optical and scanning electron microscopy were used to study the morphology and composition of the phases formed during soldering. A soldering mechanism is postulated based on experimental observations. A soldering critical temperature is postulated at which iron begins to react with aluminum to form an aluminum-rich liquid phase and solid intermetallic compounds. When the temperature at the die surface is higher than this critical temperature, the aluminum-rich phase is liquid and joins the die with the casting during the subsequent solidification. The paper discusses the mechanism of soldering for the case of pure aluminum and 380 alloy casting in a steel mold, the factors that promote soldering, and the strength of the bond formed when soldering occurs. conditions, an aluminum-rich soldering layer may also form over the intermetallic layer. Although a significant amount of research has been conducted on the nature of these intermetallics, little is known about the conditions under which soldering occurs.

  13. Is Dying Young Worse than Dying Old?

    ERIC Educational Resources Information Center

    Jecker, Nancy S.; Schneiderman, Lawrence J.

    1994-01-01

    Notes that, in contemporary Western society, people feel death of small child is greater injustice than death of older adult and experience correspondingly greater sorrow, anger, regret, or bitterness when very young person dies. Contrasts these attitudes with those of ancient Greece and shows relevance that different attitudes toward death have…

  14. Micromechanical die attachment surcharge

    DOEpatents

    Filter, William F.; Hohimer, John P.

    2002-01-01

    An attachment structure is disclosed for attaching a die to a supporting substrate without the use of adhesives or solder. The attachment structure, which can be formed by micromachining, functions purely mechanically in utilizing a plurality of shaped pillars (e.g. round, square or polygonal and solid, hollow or slotted) that are formed on one of the die or supporting substrate and which can be urged into contact with various types of mating structures including other pillars, a deformable layer or a plurality of receptacles that are formed on the other of the die or supporting substrate, thereby forming a friction bond that holds the die to the supporting substrate. The attachment structure can further include an alignment structure for precise positioning of the die and supporting substrate to facilitate mounting the die to the supporting substrate. The attachment structure has applications for mounting semiconductor die containing a microelectromechanical (MEM) device, a microsensor or an integrated circuit (IC), and can be used to form a multichip module. The attachment structure is particularly useful for mounting die containing released MEM devices since these devices are fragile and can otherwise be damaged or degraded by adhesive or solder mounting.

  15. Extrusion die and method

    DOEpatents

    Lipp, G. Daniel

    1994-05-03

    A method and die apparatus for manufacturing a honeycomb body of triangular cell cross-section and high cell density, the die having a combination of (i) feedholes feeding slot intersections and (ii) feedholes feeding slot segments not supplied from slot intersections, whereby a reduction in feedhole count is achieved while still retaining good extrusion efficiency and extrudate uniformity.

  16. Erfahrungen im Aufbau des IT Service Desks der Technischen Universität München

    NASA Astrophysics Data System (ADS)

    Vellguth, Karmela

    Durch das Projekt IntegraTUM und die darin eingebettete Einrichtung eines IT Service Desks mit 1st, 2nd und 3rd Level Support gelang eine an ITIL orientierte Neuausrichtung der internen IT-Dienstleistungen. Die vormals existierende Struktur mit einer Vielzahl an Ansprechpartnern bei auftretenden IT-Problemen wurde aufgelöst. Die Nutzer haben nun eine Anlaufstelle erhalten, die sich für die Beantwortung aller Incidents in kürzester Zeit und mit qualitativ hohem Niveau zuständig fühlt.

  17. Amerikas Einschätzung der deutschen Atomforschung: Das deutsche Uranprojekt

    NASA Astrophysics Data System (ADS)

    Walker, Mark

    2002-07-01

    Die amerikanischen Wissenschaftler und ihre emigrierten Kollegen, die am Bau der Atombombe beteiligt waren, verfügten über sehr widersprüchliche und großteils falsche Informationen über den Fortschritt des deutschen Uranprogramms. Noch nach Kriegsende lässt sich dies an Aussagen des Leiters der amerikanischen Alsos-Mission, Samuel Goudsmit, festmachen. Tatsächlich war das deutsche Programm hinsichtlich seiner wissenschaftlichen Grundlagen und des Managements nicht so unterlegen, wie vielfach behauptet wurde. Aber die deutschen Behörden waren nicht in der Lage, Geld und Ressourcen in gleichem Maße in das Uranprojekt zu investieren, wie etwa in das Peenemünder Raketenprojekt.

  18. Death, dying, and domination.

    PubMed

    Spindelman, Marc

    2008-06-01

    This Article critiques conventional liberal arguments for the right to die on liberal grounds. It contends that these arguments do not go far enough to recognize and address private, and in particular structural, forms of domination. It presents an alternative that does, which is thus more respectful of true freedom in the context of death and dying, and also more consistent with liberalism. After discussing obstacles to the achievement of a right to die that encompasses freedom from both public and private domination, the Article closes with a significant reform project within bioethics that might help bring it about.

  19. Leistungsmessungen zum Einsatz der J2EE Technologie für Feldbussimulationen

    NASA Astrophysics Data System (ADS)

    Garreis, Thorsten; Jürgens, Hendrik; Schmidtmann, Uwe; von Cölin, Gerd

    Die Flexibilisierung der Fertigung und kurze Produktzyklen setzen einen beschleunigten, möglichst fehlerfreien Entwicklungsprozess voraus. Dieses Ziel kann jedoch nur erreicht werden, wenn bereits parallel zur Hardwareentwicklung die Software mit Hilfe einer Simulation der Hardware entwickelt und getestet werden kann. Darüber hinaus können mit Simulationen alternative Lösungen studiert werden, die zu optimierten Verfahren führen. In dieser Arbeit werden Leistungstests an der Simulationsumgebung drd-Simulator präsentiert, die auf der J2EE-Technologie1 basiert. Für die Messungen wird eine Soft-SPS eingesetzt, deren Feldbus vom Typ ModbusTCP simuliert wird. Erste Messungen zeigen, dass J2EE eine leistungsstarke und skalierbare Plattform für die Realisierung von Feldbussimulationen ist. In einem Zyklusbereich ab 100 ms ist das E/A-Verhalten echtzeitfähig, wobei meherere Steuerungen auf den Bus zugreifen können. Die J2EE-Technologie zeichnet sich zudem durch eine gute Ausfallsicherheit und dynamische Rekonfigurier-barkeit aus, so dass Tests dynamisch zur Laufzeit ergänzt oder verändert werden können.

  20. Epigenetische Aspekte bei Karzinomen der Kopf-Hals-Region

    PubMed Central

    Schmezer, Peter; Plass, Christoph

    2009-01-01

    Zusammenfassung Plattenepithelkarzinome der Kopf-Hals-Region (HNSCC) zählen seit Jahren zu den weltweit häufigsten Krebsarten. Trotz vieler Bemühungen hat sich das 5-Jahres-Überleben bei Patienten mit HNSCC kaum verbessert. Um einen Fortschritt zu erzielen, ist es notwendig, die der Erkrankung zugrunde liegenden biologischen Prozesse besser zu verstehen. Neben den bekannten genetischen Veränderungen haben molekular-zytogenetische Untersuchungen bei HNSCC gezeigt, dass es weitere Veränderungen gibt, die mit Vermehrung und Verlust chromosomaler Bereiche einhergehen, für die jedoch die krankheitsverursachenden Gene bisher nicht identifiziert wurden. Darüberhinaus haben jüngste Forschungsergebnisse verdeutlicht, dass epigenetische Modifikationen wie die DNA Methylierung eine wichtige Rolle spielen. So konnte gezeigt werden, dass bei HNSCC eine Reihe von Genen (z.B. das Tumorsuppressorgen CDKN2A sowie DAPK1, MGMT, TIMP3, TCF21, und C/EBPα) hypermethylierte Bereiche in regulatorischen DNA Sequenzen aufweisen, wodurch ihre Expression verringert oder unterbunden wird. Die Hypermethylierung solcher Gene könnte als Biomarker zur Früherkennung von HNSCC genutzt werden und nicht zuletzt dadurch zur Verbesserung von Prävention und Therapieerfolg beitragen. PMID:18483718

  1. Der Einfluß des Prostomiums auf die Entwicklung der Geschlechtsprodukte des Polychaeten Anaitides mucosa (Phyllodocidae)

    NASA Astrophysics Data System (ADS)

    Röhrkasten, A.

    1983-03-01

    Spermatogenesis and especially oogenesis have been investigated in decerebrate and intact specimens of Anaitides mucosa. The results indicate, in contrast to similar experiments on the related species Eulalia viridis, that decerebration causes an accelerated, but nevertheless qualitative normal growth of coelomic oocytes. The implantation of whole prostomia into the coelom of decerebrate females has no counteractive effects. It is likely that the prostomium exerts its influence via the ventral nerve cord.

  2. Literaturrecherchen online — die neue Dimension in der Bewältigung der Informationslawine?

    NASA Astrophysics Data System (ADS)

    Zass, Engelbert

    1982-06-01

    Several examples of online literature searches in the Chemical Abstracts, Science Citation Index, and Biological Abstracts data bases are discussed to demonstrate that online searching is a powerful and very useful tool for retrieving information faster and more efficiently than before. This article attempts to stimulate scientists to familiarize themselves with this new technique and gain some personal experience, because online searching for information will probably become indispensable in scientific research and teaching in the near future.

  3. Die Bedeutung des "Orbis Sensualium Pictus" fur Schulbucher im Kontext der Geschichte der Schule.

    ERIC Educational Resources Information Center

    Michel, Gerhard

    1992-01-01

    Investigates the impact of Comenius' textbook "Orbis Sensualium Pictus" on eighteenth-century German textbooks. Examines his textbook theory and the structure and function of the book. Reports influence on the illustration of textbooks, function and structure of an introductory book, the correlation of verbal and real elements, and…

  4. Die Struktur von schlankem Materialfluss mit Lean Production Kanban und Innovationen

    NASA Astrophysics Data System (ADS)

    Scheid, Wolf-Michael

    In der Literatur wird Materialfluss überwiegend in Spezialdisziplinen betrachtet, etwa der Steuerungslogik, der Logistiktechnik oder dem Supply Chain Management. Ein charakterisierendes Merkmal des Materialflusses ist jedoch, dass er sich aus vielfältigen Einzelbausteinen zusammensetzt, die alle harmonisch abgestimmt sein müssen. Die maximal erreichbare Effizienz wird nicht durch Höchstleistungen in dem einen oder anderen Spezialthema bestimmt, sondern durch das schwächste Glied im gesamten komplexen Netzwerk. Den Schnittstellen zwischen den betroffenen Fachbereichen in einem Unternehmen kommt hier eine ganz besondere Bedeutung zu: Erst ein harmonischer Einklang ermöglicht hohe Effektivität. Dies setzt umfassendes Verständnis für interdisziplinäre Notwendigkeiten, ein hohes Maß an Abstimmung mit den operativen Prozessen und letztlich einen einvernehmlichen Umgang und den Respekt vor den Problemstellungen des Anderen voraus.

  5. Reisen im freien Fall - Teil 2: Das Zwillingsparadoxon aus dem Blickwinkel der ART

    NASA Astrophysics Data System (ADS)

    Sonne, Bernd; Weiß, Reinhard

    2013-07-01

    Nachdem wir uns mit den Prinzipien der ART und einigen Beispielen vertraut gemacht haben, kommen wir nun zur Berechnung des Zwillingsparadoxons aus Sicht des reisenden Zwillings. Dabei spielt das Äquivalenzprinzip eine große Rolle. Deshalb wird die Bewegungssituation noch einmal erläutert, diesmal aus Sicht von Katrin. Sie befindet sich in ihrem System S'in Ruhe. In ihrem System läuft die Zeit t'ab. Nach dem Start fühlt Katrin jedoch eine Kraft, die sie als Gravitationskraft interpretieren kann. Sie merkt es daran, dass sie in den Sitz gedrückt wird. Nach einiger Zeit werden die Triebwerke abgeschaltet, und das Raumschiff fliegt mit konstanter Geschwindigkeit weiter, Phase 2. Anschließend wird der Schub der Triebwerke solange umgekehrt, bis das Raumschiff irgendwo mit der Geschwindigkeit null am Umkehrpunkt U landet, Phase 3 (Abb. 15.1). Die Erde, auf der sich Michael befindet, bewegt sich mit x'(t') aus Sicht von Katrin im freien Fall von ihr weg, s. das Experiment mit dem steigenden Fahrstuhl in Abschn. 13.2.1.

  6. [DER ANFANG IST DIE HALFTE DES GANZEN (PLATON) Konzept der psychosomatischen Abteilung an der Landes-Nervenklinik Wagner-Jauregg.].

    PubMed

    Mezgolich, Helga

    2003-12-01

    The psychosomatic department is the first institution of this kind in Upper-Austria. Our intention is to present a competence center for the treatment of mind and body. In interdisciplinary co-operation we want to create a field of learning based on the bio-psycho-social model of disease, which provides a possibility for patients to improve their quality of life and therefore helps to soothe the symptoms of illness or to avoid its worsening.

  7. Nichtrigide Bildregistrierung für die adaptive Strahlentherapie mittels Free Form Deformation

    NASA Astrophysics Data System (ADS)

    Wurst, Gernot; Bendl, Rolf

    Im Rahmen der Adaptiven Strahlentherapie müssen zum Behandlungszeitpunkt Abweichungen der aktuellen Patientengeometrie von den Planungsdaten bekannt sein, damit eine Anpassung des Bestrahlungsplans vorgenommen werden kann. State of the Art ist in diesem Zusammenhang die rigide Registrierung von Planungs- und Kontrolldaten. Hierbei werden jedoch komplexere, nichtrigide Deformationen nicht angemessen berücksichtigt. Daher wurde ein Verfahren entwickelt, das diese komplexen Deformationen durch ein Free Form-Deformationsmodell beschreibt. Die dafür vorzugebenden Translationsvektoren wurden durch Template Matching bestimmt. Es zeigte sich, dass die vorhandenen Deformationen weitgehend erkannt werden. Weiterhin ist das Verfahren aufgrund seines günstigen Laufzeitverhaltens prädestiniert für die Adaptive Strahlentherapie.

  8. Killing, letting die and moral perception.

    PubMed

    Gillett, Grant

    1994-10-01

    There are a number of arguments that purport to show, in general terms, that there is no difference between killing and letting die. These are used to justify active euthanasia on the basis of the reasons given for allowing patients to die. I argue that the general and abstract arguments fail to take account of the complex and particular situations which are found in the care of those with terminal illness. When in such situations, there are perceptions and intuitions available that do not easily find propositional form but lead most of those whose practice is in the care of the dying to resist active euthanasia. I make a plea for their intuitions to be heeded above the sterile voice of abstract premises and arguments by examining the completeness of the outline form of the pro-euthanasia argument. In doing so, I make use of Nussbaum's discussion of moral perception and general claims to be found in the literature of moral particularism.

  9. When a Baby Dies.

    ERIC Educational Resources Information Center

    Church, Martha Jo; And Others

    Written especially for grieving mothers whose babies have died, this booklet offers an overview of stages and experiences through which bereaved parents commonly pass. Specifically, the text is intended to give comfort to bereaved parents, offer insight into the grieving process, and provide thoughts on leave-taking ceremonies. The first section…

  10. When Somebody Dies

    MedlinePlus

    ... to have fun with. That absence leaves a big hole in our lives. Maybe you had a pet that died . Remember the first few times you walked into the house after your dog or cat was gone? It was strange not to have ...

  11. When Somebody Dies

    MedlinePlus

    ... A A What's in this article? When — and How — Does It Happen? Where Do Dead People Go? What Does Grieving Mean? What About Me? If I'm Going to Die Someday, What Should I Do Now? en español ...

  12. Nutzergerechte Entwicklung der Mensch-Maschine-Interaktion von Fahrerassistenzsystemen

    NASA Astrophysics Data System (ADS)

    König, Winfried

    Durch langjährige Forschungen bei Kfz-Herstellern, Zulieferfirmen und an Hochschulen sind umfangreiche, aber dennoch lückenhafte Erkenntnisse über das Zusammenspiel zwischen FAS und Nutzer gewonnen worden. In deutschen und internationalen Projekten wie z. B. PROMETHEUS, DRIVE, MOTIV, INVENT, RESPONSE und AKTIV haben sich Kfz-Hersteller, Zulieferfirmen, Hochschulen und weitere staatliche und private Forschungseinrichtungen zusammengefunden, um die vorwettbewerbliche Forschung für derartige Systeme voranzutreiben. Im folgenden Kapitel sollen einige der gewonnenen Kenntnisse dargelegt werden, um die Entwicklung des HMI von FAS zu erleichtern.

  13. Reduktion der Invasivität bei nadelbasierter Bewegungskompensation für navigierte Eingriffe im Abdomen

    NASA Astrophysics Data System (ADS)

    Maier-Hein, L.; Tekbas, A.; Franz, A. M.; Tetzlaff, R.; Müller, S. A.; Pianka, F.; Wolf, I.; Kauczor, H.-U.; Schmied, B. M.; Meinzer, H.-P.

    Diese Arbeit stellt eine in-vivo Genauigkeitsstudie über das Kombinieren interner und externer Marker für die Bewegungskompensation bei Leberinterventionen vor. Abhängig von der Anzahl und Anordnung der verwendeten Marker sowie der angewandten Echtzeittransformation wurde bei kontinuierlicher Atmung eine Schätzgenauigkeit der Zielposition zwischen 1 und 5 mm erreicht. Das Hinzufügen einer einzigen Hilfsnadel zu einer Menge von Hautmarkern führte zu einer Fehlerreduktion von über 50%. Die Ergebnisse dieser Studie können in der Praxis verwendet werden, um basierend auf dem Tradeoff zwischen geringer Invasivität und hoher Genauigkeit eine geeignete Kombination von internen und externen Markern für eine gegebene Fragestellung zu wählen.

  14. Optimierung von FSS-Bandpassfiltern mit Hilfe der Schwarmintelligenz (Particle Swarm Optimization)

    NASA Astrophysics Data System (ADS)

    Wu, G.; Hansen, V.; Kreysa, E.; Gemünd, H.-P.

    2006-09-01

    In diesem Beitrag wird ein neues Verfahren zur Optimierung von Bandpassfiltern aus mehrlagigen frequenzselektiven Schirmen (FSS), die in ein Dielektrikum eingebettet sind, vorgestellt. Das Ziel ist es, die Parameter der gesamten Struktur so zu optimieren, dass ihre Transmissionseigenschaften hohe Filteranforderungen erfüllen. Als Optimierungsverfahren wird die Particle Swarm Optimization (PSO) eingesetzt. PSO ist eine neue stochastische Optimierungsmethode, die in verschieden Gebieten, besonders aber bei der Optimierung nicht linearer Probleme mit mehreren Zielfunktionen erfolgreich eingesetzt wird. In dieser Arbeit wird die PSO in die Spektralbereichsanalyse zur Berechnung komplexer FSS-Strukturen integriert. Die numerische Berechnung basiert auf einer Integralgleichungsformulierung mit Hilfe der spektralen Greenschen Funktion für geschichtete Strukturen. This paper presents a novel procedure for the optimization of band-pass filters consisting of frequency selective surfaces (FSS) embedded in a dielectric. The aim is to optimize the parameters of the complete structure so that the transmission characteristics of the filters fulfill the demanding requirements. The Particle Swarm Optimization (PSO) is used as the optimization procedure. PSO is a new stochastic optimization method that is successfully applied in different areas for the optimization of non-linear problems with several object-functions. In this work, PSO is integrated into the spectral domain analysis for the calculation of the complex FSS structures. The numerical computation is based on the formulation of an integral equation with the help of the spectral Green's function for layered media.

  15. Modeling the Mechanical Performance of Die Casting Dies

    SciTech Connect

    R. Allen Miller

    2004-02-27

    The following report covers work performed at Ohio State on modeling the mechanical performance of dies. The focus of the project was development and particularly verification of finite element techniques used to model and predict displacements and stresses in die casting dies. The work entails a major case study performed with and industrial partner on a production die and laboratory experiments performed at Ohio State.

  16. Heated die facilitates tungsten forming

    NASA Technical Reports Server (NTRS)

    Chattin, J. H.; Haystrick, J. E.; Laughlin, J. C.; Leidy, R. A.

    1966-01-01

    Tungsten forming in a press brake employs a bottom die assembly with a heating manifold between two water-cooled die sections. The manifold has hydrogen-oxygen burners spaced along its length for even heat during forming.

  17. Designing a Die for Hydroforming

    NASA Astrophysics Data System (ADS)

    Vasile, Radu

    2016-12-01

    Designing a die is in every application field an intensive process of bringing together know how from design, testing and every-day use from previous dies with the new application requirements. Contribution deals with a knowledge oriented, modular and feature integrated computer aided design system for die development. This paper describes the concepts behind designing a hydroforming die for sheet metal forming, with easy application-use in small workshops for testing hydroforming capabilities of different materials.

  18. Fehler begehen - Mathematik verstehen Über die Bedeutung von Fehlern für das Verstehen

    NASA Astrophysics Data System (ADS)

    Käser, Udo

    Auch wenn eine historisch oder systematisch umfassende Darstellung zur Fehlerthematik bislang nicht vorliegt, ist die Idee, einer Fehleranalyse unter der Leitfrage, welche Fehler von Schülerinnen und Schülern aufgrund welcher epistemologischen Überzeugungen begangen werden, zentralen Raum für die Betrachtung von Verstehensprozessen einzuräumen, nicht neu. So ist es geradezu ein Charakteristikum einer modernen konstruktivistischen Didaktik, die eigenen Fehler von Lernenden als ihre individuellen Lerngelegenheiten zu begreifen, die einen wichtigen Motor für den subjektiven Lernfortschritt bilden. Diese Sichtweise wurzelt aus psychologischer Perspektive in Analysen in der Tradition Piagets, der in Abkehr von einer quantitativen, psychometrischen Beschreibung kognitiver Prozesse, wie sie sich zum Beispiel in Intelligenztheorien nach Binet findet, qualitativ zu beschreiben versuchte, in welcher Weise Kinder und Jugendliche denken und urteilen. Doch auch schon in der klassischen Philosophie sind entsprechende Ansätze zu finden. Prominente Beispiele hierfür sind die Idolenlehre Bacons und die Ideenlehre Platons.

  19. Combined Therapy of Septicemia with Ofloxacin and/or Synthetic Trehalose Dicorynomycolate (S-TDCM) in Irradiated and Wounded Mice (Die Kombinierte Therapie der Septikaemie mit Ofloxacin und/oder Synthetischem Trehalose- Dicorynomycolat (S-TDCM) bei Bestrahlten und Verwundeten Maeusen)

    DTIC Science & Technology

    1989-01-01

    for effective therapy of polymicrobic infections in irradiated/wounded mice. ZUSAMMENFASSUNG Im Gefolge letaler Bestrahlung fallen MAuse normalerweise...durch die Inhalation von Methoxyfluran andsthetisiert wurden. Eine Stunde nach 8.0 G.- Germma- Bestrahlung wurden dorsal Haut- und Muskelgewebe in Ent

  20. Fragwuerdige Luxussteuern: Statusstreben und Demonstratives Konsumverhalten in der Geschichte Oekonomischen Denkens (Questionable Luxury Taxes: Status Seeking and Conspicuous Consumption in the History of Economic Thought)

    DTIC Science & Technology

    2008-05-01

    England immer mehr, und der Markt ffir Luxusgiiter und Mode begann zu florieren. Die Kommerzialisierung des Handels im England des 18. Jahrhunderts...der insbesondere Hirsch (1976) in seinen Social Limits to Growth wieder Nachdruck verleihen sollte. Siehe hierzu Abschnitt 2.9. 5 auf seinen...klassischen Schule ibertriebenes statusbedingtes Konsumverhalten als social waste an und pladiert fdr eine Lenkung statusbedingten Konsumverhaltens in

  1. Dying with dignity.

    PubMed

    Madan, T N

    1992-08-01

    Death is a theme of central importance in all cultures, but the manner in which it is interpreted varies from society to society. Even so, traditional cultures, including Christian, Hindu and Jain religious traditions, exhibited a positive attitude to death and did not look upon it in a dualistic framework of good vs bad, or desirable vs undesirable. Nor was pessimism the dominant mood in their thinking about death itself. A fundamental paradigm shift occurred in the West in the eighteenth century when death was desacralized and transformed into a secular event amenable to human manipulation. From those early beginnings, dying and death have been thoroughly medicalized and brought under the purview of high technology in the twentieth century. Once death is seen as a problem for professional management, the hospital displaces the home, and specialists with different kinds and degrees of expertise take over from the family. Everyday speech and the religious idiom yield place to medical jargon. The subject (an ageing, sick or dying person) becomes the object of this make-believe yet real world. As the object of others' professional control, he or she loses the freedom of self-assessment, expression and choice. Or, he or she may be expected to choose when no longer able to do so. Thus, not only freedom but dignity also is lost, and lawyers join doctors in crisis manipulation and perpetuation. Although the modern medical culture has originated in the West, it has gradually spread to all parts of the world, subjugating other kinds of medical knowledge and other attitudes to dying and death.(ABSTRACT TRUNCATED AT 250 WORDS)

  2. Ökologische Grundlagen und limitierende Faktoren der Renaturierung

    NASA Astrophysics Data System (ADS)

    Hölzel, N.; Rebele, F.; Rosenthal, G.; Eichberg, C.

    In den dicht besiedelten und agrarisch besonders intensiv genutzten Regionen Mittel- und Westeuropas ist seit Ende des Zweiten Weltkrieges ein fortschreitender Verlust an naturnahen ökosystemen mit hoher biologischer Vielfalt zu verzeichnen. Spätestens seit den 1970er-Jahren ist daher die Neuschaffung und Wiederherstellung gefährdeter Lebensräume und Biozönosen zunehmend in den Mittelpunkt von Naturschutzmaßnahmen gerückt (Bakker 1989, Muller et al. 1998, Bakker und Berendse 1999). Aufgrund fehlender wissenschaftlicher Grundlagen und praktischer Erfahrungen wurden Renaturierungsmaßnahmen anfangs fast durchweg nach dem trial and error-Prinzip durchgeführt. Im Vordergrund standen dabei zunächst die Wiederherstellung adäquater abiotischer Standortbedingungen sowie die Reorganisation traditioneller Nutzungsmanagements. Bei Ersterem ging es neben der Wiedervernässung entwässerter Feuchtgebiete (Pfadenhauer und Grootjans 1999) vor allem darum, Eutrophierungseffekte zu beseitigen und die Produktivität des Standortes auf das Niveau der Zielgemeinschaft zurückzuführen (Gough und Marrs 1990, Oomes et al. 1996, Snow et al. 1997, Tallowin et al. 1998).

  3. Understandings of death and dying for people of Chinese origin.

    PubMed

    Hsu, Chiung-yin; O'Connor, Margaret; Lee, Susan

    2009-02-01

    This article introduces the primary beliefs about ancestor worship, Taoism, Confucianism, Buddhism and traditional Chinese medicine that have influenced Chinese people for thousands of years, particularly in relation to death and dying. These cultures and traditions remain important for Chinese people wherever they live. Over a long period, Chinese people have integrated these philosophies and religions to form the basis of their culture and traditions. Although they agree that death is a natural part of the life span, a unique belief about death and dying has emerged among the Chinese from this integration. From this, the people find a significant definition of death and dying.

  4. Über die Kleinsignalgewinnmessung nach Ladenburg-Levy

    NASA Astrophysics Data System (ADS)

    Grunwald, R.; Hertz, J. H.

    Es werden die Möglichkeiten und Probleme der Anwendung einer alten Methode von Ladenburg-Levy zur Kleinsignalgewinnmessung in Niederdruck-Impulsgasentladungen diskutiert. Als Beispiel werden Ergebnisse der zeitaufgelösten Gewinnmessung am 2. Pos. System des Stickstoff ( = 337 nm) mitgeteilt.Translated AbstractOn the Small-Signal Gain Measurement According to Ladenburg-LevyThe application of an old method of Ladenburg-Levy to small-signal gain measurement in pulsed low pressure gas discharges as well as the problems connected with this method are discussed. As an example experimental results of time resolved gain measurements in the 2nd positive system of nitrogen ( = 337 nm) are presented.

  5. Accurate defect die placement and nuisance defect reduction for reticle die-to-die inspections

    NASA Astrophysics Data System (ADS)

    Wen, Vincent; Huang, L. R.; Lin, C. J.; Tseng, Y. N.; Huang, W. H.; Tuo, Laurent C.; Wylie, Mark; Chen, Ellison; Wang, Elvik; Glasser, Joshua; Kelkar, Amrish; Wu, David

    2015-10-01

    Die-to-die reticle inspections are among the simplest and most sensitive reticle inspections because of the use of an identical-design neighboring-die for the reference image. However, this inspection mode can have two key disadvantages: (1) The location of the defect is indeterminate because it is unclear to the inspector whether the test or reference image is defective; and (2) nuisance and false defects from mask manufacturing noise and tool optical variation can limit the usable sensitivity. The use of a new sequencing approach for a die-to-die inspection can resolve these issues without any additional scan time, without sacrifice in sensitivity requirement, and with a manageable increase in computation load. In this paper we explore another approach for die-to-die inspections using a new method of defect processing and sequencing. Utilizing die-to-die double arbitration during defect detection has been proven through extensive testing to generate accurate placement of the defect in the correct die to ensure efficient defect disposition at the AIMS step. The use of this method maintained the required inspection sensitivity for mask quality as verified with programmed-defectmask qualification and then further validated with production masks comparing the current inspection approach to the new method. Furthermore, this approach can significantly reduce the total number of defects that need to be reviewed by essentially eliminating the nuisance and false defects that can result from a die-to-die inspection. This "double-win" will significantly reduce the effort in classifying a die-to-die inspection result and will lead to improved cycle times.

  6. Where people die.

    PubMed Central

    Katz, B P; Zdeb, M S; Therriault, G D

    1979-01-01

    Death certificates for 1977 filed with the New York State Department of Health were studied to determine where people died. Data were examined by the location and cause of death and by the age, sex, race, and marital status of the decedent. Comparisons were made with a similar study in which U.S. data were used for 1958 events. Approximately 60 percent of all the 1977 deaths in upstate New York occurred in hospitals; only 27 percent occurred outside an institution. The location of death varied by all the factors studied. Within all age categories, males had a higher percentage of hospital deaths. In those age categories in which nursing home deaths comprised a significant proportion of total deaths, females had a higher percentage of such deaths than males. Differences in the location of death according to its cause reflect the nature of the cause of death, for example, whether it was of sudden onset or the result of chronic disease. Most people do not consider in advance where they might die. The idea that age, sex, and marital status, as well as the more obvious cause, all play a part in the location may seem surprising. Yet all these factors were found to be associated withe location of deaths in upstate New York, and there is no reason to believe that this association does not hold true for the entire nation. More research, however, needs to be done based on more years and other geographic artal stutus may be instructive as to the present state of health resources. PMID:515338

  7. Maintaining Low Voiding Solder Die Attach for Power Die While Minimizing Die Tilt

    SciTech Connect

    Hamm, Randy; Peterson, Kenneth A.

    2015-10-01

    This paper addresses work to minimize voiding and die tilt in solder attachment of a large power die, measuring 9.0 mm X 6.5 mm X 0.1 mm (0.354” x 0.256” x 0.004”), to a heat spreader. As demands for larger high power die continue, minimizing voiding and die tilt is of interest for improved die functionality, yield, manufacturability, and reliability. High-power die generate considerable heat, which is important to dissipate effectively through control of voiding under high thermal load areas of the die while maintaining a consistent bondline (minimizing die tilt). Voiding was measured using acoustic imaging and die tilt was measured using two different optical measurement systems. 80Au-20Sn solder reflow was achieved using a batch vacuum solder system with optimized fixturing. Minimizing die tilt proved to be the more difficult of the two product requirements to meet. Process development variables included tooling, weight and solder preform thickness.

  8. Graphite/Thermoplastic-Pultrusion Die

    NASA Technical Reports Server (NTRS)

    Wilson, Maywood L.; Frye, Mark W.; Johnson, Gary S.; Stanfield, Clarence E.

    1990-01-01

    Attachment to extruder produces thermoplastic-impregnated graphite tape. Consists of profile die, fiber/resin collimator, and crosshead die body. Die designed to be attached to commercially available extrusion machine capable of extruding high-performance thermoplastics. Simple attachment to commercial extruder enables developers of composites to begin experimenting with large numbers of proprietary resins, fibers, and hybrid composite structures. With device, almost any possible fiber/resin combination fabricated.

  9. van der Waals torque

    NASA Astrophysics Data System (ADS)

    Esquivel-Sirvent, Raul; Schatz, George

    2014-03-01

    The theory of generalized van der Waals forces by Lifshtz when applied to optically anisotropic media predicts the existence of a torque. In this work we present a theoretical calculation of the van der Waals torque for two systems. First we consider two isotropic parallel plates where the anisotropy is induced using an external magnetic field. The anisotropy will in turn induce a torque. As a case study we consider III-IV semiconductors such as InSb that can support magneto plasmons. The calculations of the torque are done in the Voigt configuration, that occurs when the magnetic field is parallel to the surface of the slabs. The change in the dielectric function as the magnetic field increases has the effect of decreasing the van der Waals force and increasing the torque. Thus, the external magnetic field is used to tune both the force and torque. The second example we present is the use of the torque in the non retarded regime to align arrays of nano particle slabs. The torque is calculated within Barash and Ginzburg formalism in the nonretarded limit, and is quantified by the introduction of a Hamaker torque constant. Calculations are conducted between anisotropic slabs of materials including BaTiO3 and arrays of Ag nano particles. Depending on the shape and arrangement of the Ag nano particles the effective dielectric function of the array can be tuned as to make it more or less anisotropic. We show how this torque can be used in self assembly of arrays of nano particles. ref. R. Esquivel-Sirvent, G. C. Schatz, Phys. Chem C, 117, 5492 (2013). partial support from DGAPA-UNAM.

  10. I Could Have Died Laughing.

    ERIC Educational Resources Information Center

    Maher, Michael Forrest; Smith, Douglas

    1993-01-01

    Notes that caregivers of the dying would do well to consider the prescriptive power of humor when confronting the challenges of healthy care for the terminally ill. Addresses laughter as the best medicine not only for the dying person but also for family and principal caregivers. Includes examples of therapeutic use of humor with the terminally…

  11. Adapt or die?

    PubMed

    Visser, S S; Nel, A H

    1996-12-01

    The worldwide economic recession and the concomitant limited stock of finances have had an influence on the available money of every household and have also inhibited the improvement of socio-economic conditions and medicine. The Reconstruction and Development Programme (RDP) has the objective of improving the living conditions of the people with regard to housing, education, training and health care. The latter seems to be a major problem which has to be addressed with the emphasis on the preventive and promotional aspects of health care. A comprehensive health care system did not come into being property in the past because of the maldistribution of health care services, personnel and differences in culture and health care beliefs and values. The question that now arises, is how to render a quality health care service within the constraints of inadequate financing and resources. A comprehensive literature study has been done with reference to quality health care and financing followed by a survey of existing health services and finances. Recommendations are made about minimum requirements to be accepted if one were to adapt rather than die in terms of the provision of healthcare: the decentralization and rationalization of the administration of health care, the stress on and realization of effective and efficient primary health care, the acceptance of participative management in health providing organizations, the provision of financial management training for health care managers and the application of management accounting principles for the improvement of the efficiency and effectiveness of management.

  12. Two Piece Compaction Die Design

    SciTech Connect

    Coffey, Ethan N

    2010-03-01

    Compaction dies used to create europium oxide and tantalum control plates were modeled using ANSYS 11.0. Two-piece designs were considered in order to make the dies easier to assemble than the five-piece dies that were previously used. The two areas of concern were the stresses at the interior corner of the die cavity and the distortion of the cavity wall due to the interference fit between the two pieces and the pressure exerted on the die during the compaction process. A successful die design would have stresses less than the yield stress of the material and a maximum wall distortion on the order of 0.0001 in. Design factors that were investigated include the inner corner radius, the value of the interference fit, the compaction force, the size of the cavity, and the outer radius and geometry of the outer ring. The results show that for the europium oxide die, a 0.01 in. diameter wire can be used to create the cavity, leading to a 0.0055 in. radius corner, if the radial interference fit is 0.003 in. For the tantalum die, the same wire can be used with a radial interference fit of 0.001 in. Also, for the europium oxide die with a 0.003 in. interference fit, it is possible to use a wire with a diameter of 0.006 in. for the wire burning process. Adding a 10% safety factor to the compaction force tends to lead to conservative estimates of the stresses but not for the wall distortion. However, when the 10% safety factor is removed, the wall distortion is not affected enough to discard the design. Finally, regarding the europium oxide die, when the cavity walls are increased by 0.002 in. per side or the outer ring is made to the same geometry as the tantalum die, all the stresses and wall distortions are within the desired range. Thus, the recommendation is to use a 0.006 in. diameter wire and a 0.003 in. interference fit for the europium oxide die and a 0.01 in. diameter wire and a 0.001 in. interference fit for the tantalum die. The dies can also be made to have the

  13. Planeten beobachten. Praktische Anleitung für Amateurbeobachter und solche, die es werden wollen.

    NASA Astrophysics Data System (ADS)

    Roth, G. D.

    Contents: 1. Amateurastronomie und Planetenbeobachtung (H.-J. Mettig, G. D. Roth). 2. Die visuelle Beobachtung (G. D. Roth). 3. Mond- und Planetenphotographie (B. Koch). 4. Die CCD-Bildbearbeitung (R. A. Hillebrecht). 5. Tabellen zur Ermittlung der Belichtungszeiten für Mond- und Planetenaufnahmen (W. Gruschel). 6. Die lichtelektrische Beobachtung (G. D. Roth). 7. Die Objekte in Einzeldarstellungen: Merkur (D. Niechoy); Venus (D. Niechoy); Erdmond (G. D. Roth); Mars (C. M. Schambeck); Kleine Planeten (M. Hoffmann, G. D. Roth, J. Meeus); Jupiter (H.-J. Mettig, R. C. Stoyan, A. Nikolai, C. Kowalec, G. Hahn); Saturn (R. C. Stoyan, G. Hahn, H.-J. Mettig); Uranus (R. C. Stoyan); Neptun (R. C. Stoyan); Pluto (R. C. Stoyan). 8. Adressen, Literaturhinweise, Register.

  14. Dying: A universal human experience?

    PubMed

    Bregman, L

    1989-03-01

    This paper explores the question, "Is there a universal psychological experience suffered by all dying persons?" a question to which the popular theory of Kübler-Ross presupposes an affirmative answer. Our answer takes three steps: first, a comparison between the Kübler-Ross model of dying and that of the late medievalBook of the Craft of Dying centered upon the five Kübler-Ross "stages"; second, a philosophical critique of the terms of this comparison; and third, a revised look at the alleged similarities between the two models, providing a deeper look at the moral and spiritual assumptions behind each.

  15. Werk und Leben Walter Christallers . Auszüge aus der Festrede anläßlich der Verleihung des Walter-Christaller-Preises 1996

    NASA Astrophysics Data System (ADS)

    Hottes, Ruth

    1997-03-01

    Unter der Betreuung und Federführung von Robert Gradmann promovierte am Erlanger Geographischen Institut 1932 Walter Christaller mit seiner Dissertation `Die Zentralen Orte in Süddeutschland'. Diese mit summa cum laude bewertete Monographie sollte die vielleicht berühmteste geographische Doktorarbeit unseres Jahrhunderts werden. Sie hat in den vergangenen Jahrzehnten einen beispiellosen Siegeszug angetreten. Heute gilt sie für Geographie, Raumwirtschaftslehre, Stadtforschung und Standorttheorie als eine bahnbrechende Grundkonzeption, und sie ist von größter Bedeutung für Raumordnungspolitik und Planungspraxis."

  16. REFRACTORY DIE FOR EXTRUDING URANIUM

    DOEpatents

    Creutz, E.C.

    1959-08-11

    A die is presented for the extrusion of metals, said die being formed of a refractory complex oxide having the composition M/sub n/O/sub m/R/sub x/O/sub y/ where M is magnesium, zinc, manganese, or iron, R is aluminum, chromic chromium, ferric iron, or manganic manganese, and m, n, x, and y are whole numbers. Specific examples are spinel, magnesium aluminate, magnetite, magnesioferrite, chromite, and franklinite.

  17. Imaging van der Waals Interactions.

    PubMed

    Han, Zhumin; Wei, Xinyuan; Xu, Chen; Chiang, Chi-Lun; Zhang, Yanxing; Wu, Ruqian; Ho, W

    2016-12-15

    The van der Waals interactions are responsible for a large diversity of structures and functions in chemistry, biology, and materials. Discussion of van der Waals interactions has focused on the attractive potential energy that varies as the inverse power of the distance between the two interacting partners. The origin of the attractive force is widely discussed as being due to the correlated fluctuations of electron charges that lead to instantaneous dipole-induced dipole attractions. Here, we use the inelastic tunneling probe to image the potential energy surface associated with the van der Waals interactions of xenon atoms.

  18. Implication of Two-Coupled Differential Van der Pol Duffing Oscillator in Weak Signal Detection

    NASA Astrophysics Data System (ADS)

    Peng, Hang-hang; Xu, Xue-mei; Yang, Bing-chu; Yin, Lin-zi

    2016-04-01

    The principle of the Van der Pol Duffing oscillator for state transition and for determining critical value is described, which has been studied to indicate that the application of the Van der Pol Duffing oscillator in weak signal detection is feasible. On the basis of this principle, an improved two-coupled differential Van der Pol Duffing oscillator is proposed which can identify signals under any frequency and ameliorate signal-to-noise ratio (SNR). The analytical methods of the proposed model and the construction of the proposed oscillator are introduced in detail. Numerical experiments on the properties of the proposed oscillator compared with those of the Van der Pol Duffing oscillator are carried out. Our numerical simulations have confirmed the analytical treatment. The results demonstrate that this novel oscillator has better detection performance than the Van der Pol Duffing oscillator.

  19. Physik gestern und heute Die Messung elektrostatischer Kräfte

    NASA Astrophysics Data System (ADS)

    Heering, Peter

    2002-11-01

    Im Jahre 1785 veröffentlichte der französische Militäringenieur Charles Augustin Coulomb das Kraft-Abstand-Gesetz für elektrische Ladungen. Bereits zuvor hatte Henry Cavendish auf andere Art und Weise diese Beziehung nachgewiesen, aber nicht publiziert. Entsprechende Experimente wurden auch noch in jüngerer Zeit ausgeführt, da sie eine obere Abschätzung für die Ruhemasse des Photons erlauben.

  20. Live Free or Die

    PubMed Central

    Horbinski, Craig; Mojesky, Colton; Kyprianou, Natasha

    2010-01-01

    Anoikis, programed cell death that occurs on cell detachment from the extracellular matrix, thus disrupting integrin-ligand interactions, is a critical mechanism in preventing ectopic cell growth or attachment to an inappropriate matrix. Anoikis prevents shed epithelial cells from colonizing elsewhere and is thus essential for maintaining tissue organization. Lack of integrin ligation leads to decreased focal adhesion kinase and integrin-linked kinase activity, which impairs downstream survival signaling. Consequently, targeting tumor cell survival by triggering anoikis provides a unique molecular basis for novel therapeutic targeting of tumors before initiation of metastasis. The two major cell death pathways involved in anoikis signaling are apoptosis and autophagy; growing evidence suggests an extensive cross-talk between the two killing modes as well as context-dependent cooperation and antagonism. This review discusses the functional integration between the two modes of cell death converging at anoikis, including key molecules of interaction such as Beclin 1, reactive oxygen species, extracellular signal-related kinase, and death-associated protein kinase. The involvement of other apoptotic effectors such as Bcl-2, p53, and FLICE inhibitory protein in cancer cell anoikis is also discussed. Dissecting the mechanistic players in the cellular response may be of high clinical significance in identifying effective approaches in reversing anoikis resistance in primary tumor cells and, consequently, impairing metastasis. PMID:20639456

  1. Van der Waals quintessence stars

    SciTech Connect

    Lobo, Francisco S. N.

    2007-01-15

    The van der Waals quintessence equation of state is an interesting scenario for describing the late universe, and seems to provide a solution to the puzzle of dark energy, without the presence of exotic fluids or modifications of the Friedmann equations. In this work, the construction of inhomogeneous compact spheres supported by a van der Waals equation of state is explored. These relativistic stellar configurations shall be denoted as van der Waals quintessence stars. Despite of the fact that, in a cosmological context, the van der Waals fluid is considered homogeneous, inhomogeneities may arise through gravitational instabilities. Thus, these solutions may possibly originate from density fluctuations in the cosmological background. Two specific classes of solutions, namely, gravastars and traversable wormholes are analyzed. Exact solutions are found, and their respective characteristics and physical properties are further explored.

  2. Arzt und Hobby-Astronom in stürmischen Zeiten Der Büchernachlass des Doktor Johannes Häringshauser, Viertelsmedicus in Mistelbach (1630-1641) in der Melker Stiftsbibliothek.

    NASA Astrophysics Data System (ADS)

    Davison, Giles; Glaßner, Gottfried

    2009-06-01

    Auf der Suche nach astronomischer Literatur stieß Giles Davison in der Melker Stiftsbibliothek auf den Namen "Doctor Johannes Häringshauser“ als Besitzer seltener und interessanter astronomischer Werke u.a. von Johannes Regiomontan, Georg von Peuerbach, Michael Mästlin, Johannes Kepler und Daniel Sennert. Weitere in den Jahren 2007-2009 durchgeführte Nachforschungen ergaben, dass es sich um den von 1630-1641 in Mistelbach, Niederösterreich, als Landschaftsarzt tätigen Vater des Melker Konventualen und Bibliothekars Sigismund Häringshauser (1631-1698) handelt. Er wurde 1603 als Sohn des aus Magdeburg stammenden Apothekers Johannes Häringshauser geboren und starb 1642 in Mistelbach. Johannes Häringshauser Sen. bekleidete von 1613-1640 eine Reihe wichtiger Ämter in der Wiener Stadtregierung und starb 1647. Der Studienaufenthalt von Dr. Johannes Häringshauser Jun. in Padua (1624-1626) dürfte das Interesse für Astronomie geweckt haben, das sich in seiner in die Bestände der Melker Stiftsbibliothek eingegangenen Privatbibliothek widerspiegelt. Der Großteil der 10 dem Fachbereich der Astronomie und Astrologie zuzuweisenden Titel wurde von ihm in den Jahren 1636 und 1637 erworben.

  3. On the social background of the most prominent astronomers of the 20th century - a sociological analysis of the Source Book of Astronomy and Astrophysics. (German Title: Über die soziale Herkunft der bedeutenden Astronomen des 20. Jahrhunderts - Eine soziologische Analyse des Source Book of Astronomy and Astrophysics )

    NASA Astrophysics Data System (ADS)

    Herrmann, Dieter B.

    2011-08-01

    The study investigates the social background of the most successful astronomers, astrophysicists and physicists of the 20th century. The basis for the assessment of their importance was made on grounds of their work in the "Source book of Astronomy and Astrophysics 1900-1975". The data collected presents the social situation of 202 protagonists at the time of the beginning of their career. It was gathered from relevant biographic dictionaries as well as from personal interviews. The social classification follows the "three-layers model" by Engel, Blackwell and Kellat. As a result it becomes apparent that most of the extraordinary astronomers have their roots in the upper middle class.

  4. Perspectives on Basis Sets Beautiful: Seasonal Plantings of Diffuse Basis Functions.

    PubMed

    Papajak, Ewa; Zheng, Jingjing; Xu, Xuefei; Leverentz, Hannah R; Truhlar, Donald G

    2011-10-11

    We present a perspective on the use of diffuse basis functions for electronic structure calculations by density functional theory and wave function theory. We especially emphasize minimally augmented basis sets and calendar basis sets. We base our conclusions on our previous experience with commonly computed quantities, such as bond energies, barrier heights, electron affinities, noncovalent (van der Waals and hydrogen bond) interaction energies, and ionization potentials, on Stephens et al.'s results for optical rotation and on our own new calculations (presented here) of polarizabilities and of potential energy curves of van der Waals complexes. We emphasize the benefits of partial augmentation of the higher-zeta basis sets in preference to full augmentation at a lower ζ level. Benefits and limitations of the use of fully, partially, and minimally augmented basis sets are reviewed for different electronic structure methods and molecular properties. We have found that minimal augmentation is almost always enough for density functional theory (DFT) when applied to ionization potentials, electron affinities, atomization energies, barrier heights, and hydrogen-bond energies. For electric dipole polarizabilities, we find that augmentation beyond minimal has an average effect of 8% at the polarized triple-ζ level and 5% at the polarized quadruple-ζ level. The effects are larger for potential energy curves of van der Waals complexes. The effects are also larger for wave function theory (WFT). Even for WFT though, full augmentation is not needed for most purposes, and a level of augmentation between minimal and full is optimal for most problems. The calendar basis sets named after the months provide a convergent sequence of partially augmented basis sets that can be used for such calculations. The jun-cc-pV(T+d)Z basis set is very useful for MP2-F12 calculations of barrier heights and hydrogen bond strengths.

  5. Clinical management of dying patients.

    PubMed Central

    Gavrin, J; Chapman, C R

    1995-01-01

    Dying is universal, and death should be a peaceful time. Myriad comfort measures are available in the last weeks before life ends. Discussions about end-of-life issues often suffer from lack of informed opinion. Palliative care experts have identified specific somatic and psychological sources of distress for dying patients and their loved ones. Pain, shortness of breath, nausea and vomiting, and fear of abandonment contribute substantially to both physical and psychological discomfort toward the end of life. Simple, effective methods exist for relieving those symptoms. Knowledge about the natural events associated with dying and an informed approach to medical and psychological interventions contribute to systematic and successful comfort care. We describe the origin of physical and psychological distress at the end of life and provide strategies for alleviating many of the discomforts. PMID:7571591

  6. [Dying with cancer: Hollywood lessons].

    PubMed

    Niemeyer, Fernanda; Kruse, Maria Henriqueta Luce

    2013-12-01

    The study attempts to understand how dying from cancer is portrayed by five movies produced in Hollywood between 1993 and 2006. Based on the cultural studies and their post-structuralism version and supported by the notions of discourse and subjectivity, as proposed by philosopher Michel Foucault, we suggest one of the possible readings of the movie picture corpus. We assess how the movie picture discourse acts as a cultural pedagogy that produces ways of seeing dying with cancer: immortalizing the healthy body image, silencing death, taking care of the dead body and, finally, accepting death. Our proposal is intended to stimulate reflections that may contribute to care and education in nursing.

  7. Portable punch and die jig

    DOEpatents

    Lewandowski, Edward F.; Anderson, Petrus A.

    1978-01-01

    A portable punch and die jig includes a U-shaped jig of predetermined width having a slot of predetermined width in the base thereof extending completely across the width of the jig adapted to fit over the walls of rectangular tubes and a punch and die assembly disposed in a hole extending through the base of the jig communicating with the slot in the base of the jig for punching a hole in the walls of the rectangular tubes at precisely determined locations.

  8. Dying, mourning, and spirituality: a psychological perspective.

    PubMed

    Marrone, R

    1999-09-01

    Based in an unfortunate tradition that stretches back in time to Watson's behaviorism and Freud's psychoanalysis, psychology has tended to reject and to pathologize matters of the spirit. In the past 30 years, however, with the advent of what has been termed the cognitive revolution, psychology has greatly expanded the scope of its subject matter. Psychologists and thanatologists have begun to unravel the cognitive underpinnings of our assumptive world and the transformation of those underpinnings in times of crisis and stress. This article examines the cognitive basis of the spiritual experience and the use of cognitive assimilation, accommodation strategies during the process of mourning the death of a loved one, as well as during the process of living our own dying. Of special importance to mental health professionals and clergy, new research on dying, mourning, and spirituality suggests that the specific ways in which people rediscover meaning--such as belief in traditional religious doctrine, the afterlife, reincarnation, philanthropy, or a spiritual order to the universe--may be less important than the process itself. In other words, in the midst of dealing with profound loss in our lives, the ability to reascribe meaning to a changed world through spiritual transformation, religious conversion, or existential change may be more significant than the specific content by which that need is filled.

  9. Structure and dynamics of small van der Waals complexes

    SciTech Connect

    Loreau, J.

    2014-10-06

    We illustrate computational aspects of the calculation of the potential energy surfaces of small (up to five atoms) van der Waals complexes with high-level quantum chemistry techniques such as the CCSD(T) method with extended basis sets. We discuss the compromise between the required accuracy and the computational time. Further, we show how these potential energy surfaces can be fitted and used in dynamical calculations such as non-reactive inelastic scattering.

  10. Studying at the Universities of the Armed Forces: Comparative Results from the 1999 Student Questionnaire (Studieren an den UniBw: Vergleichende Ergebnisse aus der Studentenbefragung 1999)

    DTIC Science & Technology

    2002-12-01

    distanziert kollegial UniBw Miinchen: Auf den ersten Blick scheint das allgemeine Kommunikationsgeschehen in M • nchen im Prinzip dem an der Hamburger UniBw...Hochschulforschung m )chten wir an dieser Stelle danken fMr das Oberlassen des Frageinstrumen- tariums, das dem ZHQ zur Nutzung fu-r die eigene...gerweise war schon im Grandungskonzept der UniBw diesem Moment einer m ~glichst nahen, en- gen und transparenten Kommunikation besondere Beachtung

  11. Attitudes on Death and Dying.

    ERIC Educational Resources Information Center

    Andrus, Charles E.

    This paper explored attitudes toward death and dying revealed through interviews with members of the clergy, the medical profession, funeral directors, nursing home residents, and selected others. The sampling was small and results are not intended to be representative of the groups to which these people belong. Rather, the study may be used as a…

  12. Robert Merton Dies at 92

    ERIC Educational Resources Information Center

    Snell, Joel C.

    2006-01-01

    This article features Robert Merton, who died recently at age 92. Merton came into this world as a Jewish baby named Meyer Schkolnick. He lived in South Philly where his parents wrenched a living as blue-collar workers. Merton chose an Anglicized name to move into the Yankee dominated America of the 20's and 30's. At Harvard, he studied under…

  13. Twisted Van der Waals Systems

    NASA Astrophysics Data System (ADS)

    Gani, Satrio; Rossi, Enrico

    Van der Waals systems formed by two-dimensional (2D) crystals and nanostructures possess electronic properties that make them extremely interesting for basic science and for possible technological applications. By tuning the relative angle (the twist angle) between the layers, or nanostructures, forming the Van der Waals systems experimentalists have been able to control the stacking configuration of such systems. We study the dependence on the twist angle of the electronic properties of two classes of Van der Waals systems: double layers formed by two, one-atom thick, layers of a metal dichalcogenide such as molybdenum disulfide (MoS2), and graphene nanoribbons on a hexagonal boron nitride substrate. We present results that show how, for both classes of systems, the electronic properties can be strongly tuned via the twist angle. Work supported by ACS-PRF-53581-DNI5 and NSF-DMR-1455233.

  14. The thermal fatigue resistance of H-13 Die Steel for aluminum die casting dies

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The effects of welding, five selected surface coatings, and stress relieving on the thermal fatigue resistance of H-13 Die Steel for aluminum die casting dies were studied using eleven thermal fatigue specimens. Stress relieving was conducted after each 5,000 cycle interval at 1050 F for three hours. Four thermal fatigue specimens were welded with H-13 or maraging steel welding rods at ambient and elevated temperatures and subsequently, subjected to different post-weld heat treatments. Crack patterns were examined at 5,000, 10,000, and 15,000 cycles. The thermal fatigue resistance is expressed by two crack parameters which are the average maximum crack and the average cracked area. The results indicate that a significant improvement in thermal fatigue resistance over the control was obtained from the stress-relieving treatment. Small improvements were obtained from the H-13 welded specimens and from a salt bath nitrogen and carbon-surface treatment. The other surface treatments and welded specimens either did not affect or had a detrimental influence on the thermal fatigue properties of the H-13 die steel.

  15. Should the patient be allowed to die? 1

    PubMed Central

    Nicholson, Richard

    1975-01-01

    In considering the patient's right to a certain quality of dying, this essay outlines how the legal and ethical justifications for passive euthanasia depend on the doctrine of acts and omissions. It is suggested that this doctrine is untenable and that alternative justifications are needed. The development of the modern mechanistic approach to death is traced, showing that a possible basis for an humane way of death lies in a reacceptance of a metaphysical concept of life. PMID:1100831

  16. Should assisted dying be legalised?

    PubMed

    Frost, Thomas D G; Sinha, Devan; Gilbert, Barnabas J

    2014-01-15

    When an individual facing intractable pain is given an estimate of a few months to live, does hastening death become a viable and legitimate alternative for willing patients? Has the time come for physicians to do away with the traditional notion of healthcare as maintaining or improving physical and mental health, and instead accept their own limitations by facilitating death when requested? The Universities of Oxford and Cambridge held the 2013 Varsity Medical Debate on the motion "This House Would Legalise Assisted Dying". This article summarises the key arguments developed over the course of the debate. We will explore how assisted dying can affect both the patient and doctor; the nature of consent and limits of autonomy; the effects on society; the viability of a proposed model; and, perhaps most importantly, the potential need for the practice within our current medico-legal framework.

  17. Ancillary Services Provided from DER

    SciTech Connect

    Campbell, J.B.

    2005-12-21

    Distributed energy resources (DER) are quickly making their way to industry primarily as backup generation. They are effective at starting and then producing full-load power within a few seconds. The distribution system is aging and transmission system development has not kept up with the growth in load and generation. The nation's transmission system is stressed with heavy power flows over long distances, and many areas are experiencing problems in providing the power quality needed to satisfy customers. Thus, a new market for DER is beginning to emerge. DER can alleviate the burden on the distribution system by providing ancillary services while providing a cost adjustment for the DER owner. This report describes 10 types of ancillary services that distributed generation (DG) can provide to the distribution system. Of these 10 services the feasibility, control strategy, effectiveness, and cost benefits are all analyzed as in the context of a future utility-power market. In this market, services will be provided at a local level that will benefit the customer, the distribution utility, and the transmission company.

  18. Guide for extrusion dies eliminates straightening operation

    NASA Technical Reports Server (NTRS)

    Gyorgak, C. A.; Hoover, R. J.

    1964-01-01

    To prevent distortion of extruded metal, a guidance assembly is aligned with the die. As the metal emerges from the extrusion dies, it passes directly into the receiver and straightening tube system, and the completed extrusion is withdrawn.

  19. Analyse der Störfestigkeit nichtlinearer Schaltungen gegenüber leitungsgebundenen elektromagnetischen Störungen mit multi-input Wiener/Hammerstein-Modellen

    NASA Astrophysics Data System (ADS)

    Stegemann, S.; John, W.; Mathis, W.

    2012-09-01

    In dieser Arbeit wird der Einfluss von leitungsgebundenen Störungen untersucht, welche in einen beliebigen Eingang (Signaleingang, Spannungsversorgung, Masse-Potenzial, etc.) einer Analogschaltung einkoppeln. Die zu untersuchende Schaltung wird dazu durch einen Wiener/Hammerstein-Ansatz als nichtlineares System mit zwei Eingängen modelliert. Mit Hilfe dieses Blockmodells werden analytische Ausdrücke derjenigen Frequenzanteile bestimmt, die durch Intermodulationen zwischen Stör- und Eingangssignal am Ausgang einer Schaltung entstehen.

  20. Right-Wing Extremism in Germany and the Consequences for the Armed Forces (Rechtsextreme orientierungen in deutschland und ihre folgen fuer die bundeswehr)

    DTIC Science & Technology

    2001-06-01

    religi~ iser Gruppen, von denen naturgemai3 nicht alle den Einsatz fremder Streitkrafte in ihrem Staatsgebiet begrtiffen. Ober die Untergrabung von...Miinster/Westfalen. St~Sss, Richard (1994): Forschungs- und Erklarungsansatze - emn Oberblick. In: Kowalski, Wolfgang ; Schr6der, Wolfgang (Hrsg

  1. Anthropologische Grundlegung der Leibeserziehung

    NASA Astrophysics Data System (ADS)

    Grupe, Ommo

    1989-03-01

    An anthropological basis for physical education claims to go beyond forms and rationales of physical exercise and sport that are specific to particular cultures, and to elaborate the significance of movement, games and sports for all people, deducing this from the `essence' of man. From the standpoint of modern philosophical anthropology this article attempts to treat important questions of physicalness, movement and play, starting from the principle of man's freedom of action and decision. The resultant anthropological insights alone certainly do not permit of conclusions with a practical application in the teaching of physical education. There is however no doubt that they are relevant to present-day developments — the expansion of sport, diminished physical activity in the age of technology, the lack of vital experiences and the frequent obstruction by our culture of access to all things physical.

  2. Contoured Orifice for Silicon-Ribbon Die

    NASA Technical Reports Server (NTRS)

    Mackintosh, B. H.

    1985-01-01

    Die configuration encourages purity and stable growth. Contour of die orifice changes near ribbon edges. As result, silicon ribbon has nearly constant width and little carbon contamination. Die part of furnace being developed to produce high-quality, low-cost material for solar cells.

  3. Von der Freundlichkeit in der Welt: Uber die phatische Funktion der Sprache im interkulturellen Dialog (Of Friendliness in the World: The Phatic Function of Language in Intercultural Dialogue).

    ERIC Educational Resources Information Center

    Rall, Marlene

    1996-01-01

    We humans do have a gift for bringing friendliness to this world, and this ability directly challenges the lines that Brecht wrote in which "the friendliness in this world" amounts to little more than "two handfuls of earth." With examples and thoughts from linguistics, cultural anthropology, and literature, readers are invited to reflect on how…

  4. Applying DER-CAM for IIT Microgrid Explansion Planning

    SciTech Connect

    Shahidehpour, Mohammad; Li, Zuyi; Wang, Jianhui; Chen, Chen

    2016-04-19

    consider both energy costs and CO2 emissions. On the basis of the test results, the IIT Microgrid has the potential to benefit from investments in more DER technologies. The current annual energy costs and CO2 emissions for the IIT Microgrid are 6,495.1 k$ and 39,838.5 metric tons, respectively. This represents the baseline for this project.

  5. Die Cnidogenese der Octocorallia (Anthozoa, Cnidaria): II. Reifung, Wanderung und Zerfall von Cnidoblast und Nesselkapsel

    NASA Astrophysics Data System (ADS)

    Schmidt, H.; Moraw, B.

    1982-03-01

    Migration of cnidoblasts has never been observed in Anthozoa. In contrast to hydrozoans, anthozoans are repeatedly reported to develop nematocysts locally without migration in the entoderm as well as in the ectoderm. The majority of the nematocysts studied in different Octocorallia species (Alcyonaria: Alcyonarium digitatum, Parerythropodium coralloides; Gorgonaria: Pseudopterogorgia aerosa; Pennatularia: Veretillum cynomorium) originate from the ectoderm of the scapus, where, however, no mature nematocysts occur. Cnidoblasts containing immature nematocysts accumulate in the distal scapus, from where they migrate singly like amoebae into the pinnulae of the tentacles. The nematocysts mature during migration, during which the capsular matrix becomes completely electron-translucent. Only in the oral disc, where few nematocysts occur, do they mature locally without migration. In the Octocorallia, nematocyst development and maturation takes places only in the ectoderm. Development of nematocysts has never been observed in the entoderm, nor in the pharynx; this demonstrates its entodermal origin. The entoderm contains only degenerated or phagocytized nematocysts. Contrary to hydrozoans, the mature anthozoan cnidocyte is rounded and has no processes to the mesogloea. Instead of a cnidocil it has a ciliary cone consisting of a normal flagellum, stereocilia and macrovilli. The cnidocyte is characterised by abundant electron-translucent cytoplasm and nematocyst-anchoring structures made up of cross-striated, collagen-like fibrillae and a fibrous basal ring. The position of the cross-striated fibrillae is distally similar to that of the supportive rods in hydrozoan cnidoblasts. The present study clearly demonstrates that structure and, possibly, function of an octocorallian cnidocyte is much simpler than that of a hydrozoan cnidocyte. On the other hand, cnidoblast migration, occurring in Hydrozoa as well in Octocorallia, turned out to be a much older phylogenetic character than was formerly believed.

  6. Die Stimmhaftigkeitskorrelation der deutschen Verschlusslautphoneme (The Voiced Correlation of the German Stop Phoneme)

    ERIC Educational Resources Information Center

    Ezawa, Kennosuke

    1973-01-01

    Article based on the author's report, Sprachnorm und Sprechnorm,'' presented at the Sixth International Congress of Phonetic Sciences, September 1967, Prague, Czechoslovakia. Present version read at the Fourth Czechoslovakia. Present version read at the Fourth Annual Conference of the Societas Linguistica Europaea, October 9-11, 1970, Prague,…

  7. Commemorating the 1913 Michaelis-Menten paper Die Kinetik der Invertinwirkung: three perspectives.

    PubMed

    Deichmann, Ute; Schuster, Stefan; Mazat, Jean-Pierre; Cornish-Bowden, Athel

    2014-01-01

    Methods and equations for analysing the kinetics of enzyme-catalysed reactions were developed at the beginning of the 20th century in two centres in particular; in Paris, by Victor Henri, and, in Berlin, by Leonor Michaelis and Maud Menten. Henri made a detailed analysis of the work in this area that had preceded him, and arrived at a correct equation for the initial rate of reaction. However, his approach was open to the important objection that he took no account of the hydrogen-ion concentration (a subject largely undeveloped in his time). In addition, although he wrote down an expression for the initial rate of reaction and described the hyperbolic form of its dependence on the substrate concentration, he did not appreciate the great advantages that would come from analysis in terms of initial rates rather than time courses. Michaelis and Menten not only placed Henri's analysis on a firm experimental foundation, but also defined the experimental protocol that remains standard today. Here, we review this development, and discuss other scientific contributions of these individuals. The three parts have different authors, as indicated, and do not necessarily agree on all details, in particular about the relative importance of the contributions of Michaelis and Menten on the one hand and of Henri on the other. Rather than force the review into an unrealistic consensus, we consider it appropriate to leave the disagreements visible.

  8. Die Cnidogenese der Octocorallia (Anthozoa, Cnidaria): I. Sekretionund Differenzierung von Kapsel und Schlauch

    NASA Astrophysics Data System (ADS)

    Schmidt, H.

    1981-12-01

    The ultrastructural differentiation of capsule and its relation to tube development is described in several Octocorallia species (Alcyonaria: Alcyonium digitatum, Parerythropodium coralloides, Cornularia cornucopiae, Paralcyonium elegans; Pennatularia: Pteroeides spinosum, Veretillum cynomorium; Gorgonaria: Pseudopterogorgia aerosa), all of which have only one type nematocyst. In the Octocorallia, capsule and tube are secreted successively by the Golgi apparatus associated with a primary centriolar complex. During the secretion of the external tube, the outer capsular wall (sclera) is structurally differentiated; inside the capsule the material of the inner capsular wall is separated from the later capsular content (matrix). The primary wall differentiation enables the capsules to “grow” after capsular secretion has been completed. Following tube secretion, the external tube is completely transferred into the capsule, without the tube wall being transformed into capsular wall, as previously suggested (Westfall, 1966; Ivester, 1977). During early invagination of the tube wall, the coarse, granulated matrix of the external tube is transferred into the internal tube. From this material the spines are developed, which are observed before the tube is completely transferred into the capsule. By a secondary wall differentiation the previously structureless inner capsular wall changes to a complex structure, extending again the capsule, thus mixing the capsular content and enabling the tube to shift to a position, which corresponds with that of mature capsules. These observations demonstrate for the first time the differentiation of the capsule and its close relationship to the differentiation of the tube in nematocysts of Octocorallia.

  9. Die Gesamtschule als Erziehungsprinzip der Kibbuzgemeinschaft (The Comprehensive School as the Educational Principle of the Kibbutz).

    ERIC Educational Resources Information Center

    Meronn, M.

    1972-01-01

    Following the general conference theme of "Education for Solidarity," this report describes the educational principle and framework within the Kibbutz. The "Mossad" or Community School shelters the Kibbutz child and supervises his development from 12 to 18. The great formative factors, as seen by the Kibbutz, are communal…

  10. Ausländische Direktinvestitionen - bleibt die Sozialpartnerschaft auf der Strecke?

    NASA Astrophysics Data System (ADS)

    Jansen, Peter; Weingarten, Jörg

    2017-03-01

    Germany attracts ever higher levels of foreign direct investment. This raises the question how these investments affect labour relations, which in this country are characterized by a high importance of co-determination and social partnership. Foreign investors are often perceived as a threat, amongst other things, for co-determination or the rights of the workforce. There is also empirical evidence that points to a negative impact of foreign direct investment on the social partnership model. In contrast, other studies conclude that foreign investors value co-determination. Correspondingly, it is not plausible to consider foreign direct investment generally as threat for the social partnership model.

  11. Evaluation of permanent die coatings to improve the wear resistance of die casting dies. Final project report, January 1, 1995--April 30, 1997

    SciTech Connect

    Shivpuri, R.

    1997-09-18

    Die Casting dies are subject to severe service conditions during the die casting operation. While these severe conditions are necessary to achieve high production rates, they cause the dies which are commonly made of H13 die steel, to suffer frequent failures. The major die failure mechanisms are erosion or washout, Heat checking, soldering and corrosion. Due to their geometrical complexity, die casting dies are very expensive (some dies cost over a million dollars), and thus a large number of parts have to be produced by a die, to justify this cost and leverage the advantages of the die casting process (high production rates, low manpower costs). A potential increase in the die service life, thus has a significant impact on the economics of the die; casting operation. There are many ways to extend die life: developing new wear resistant die materials, developing new surface treatments including coatings, improving heat treatment of existing H13 dies, using better lubricants that can protect the die material, or modifying the die geometry and process parameters to reduce the intensity of wear. Of these the use of coatings to improve the wear resistance of the die surface has shown a lot of promise. Consequently, use of coatings in the die casting industry and their wide use to decrease die wear can improve significantly the productivity of shop operations resulting in large savings in material and energy usage.

  12. She's going to die: the case of Angela C.

    PubMed

    Annas, G J

    1988-01-01

    Annas criticizes the legal reasoning in a District of Columbia Superior Court case, In re A.C. (1987). A dying woman who was 26 weeks pregnant agreed to attempts to prolong her life to give her fetus a better chance to be born healthy. When death seemed imminent, she appeared to refuse a cesarean section, and a Superior Court judge was called to the hospital on the advice of its legal counsel. After hearing from lawyers for the hospital, the patient, and the fetus, the judge ordered the surgery, and an appeals court concurred. The infant died two hours after delivery, the mother two days later. Annas argues that the decision rested on several false assumptions about the legal rights and obligations of pregnant women. In his view, the judges "justified their brutal and unprincipled opinion on the basis that [A.C.] was almost dead," and therefore the fetus's interests outweighed hers.

  13. Die singulation method and package formed thereby

    DOEpatents

    Anderson, Robert C [Tucson, AZ; Shul, Randy J [Albuquerque, NM; Clews, Peggy J [Tijeras, NM; Baker, Michael S [Albuquerque, NM; De Boer, Maarten P [Albuquerque, NM

    2012-08-07

    A method is disclosed for singulating die from a substrate having a sacrificial layer and one or more device layers, with a retainer being formed in the device layer(s) and anchored to the substrate. Deep Reactive Ion Etching (DRIE) etching of a trench through the substrate from the bottom side defines a shape for each die. A handle wafer is then attached to the bottom side of the substrate, and the sacrificial layer is etched to singulate the die and to form a frame from the retainer and the substrate. The frame and handle wafer, which retain the singulated die in place, can be attached together with a clamp or a clip and to form a package for the singulated die. One or more stops can be formed from the device layer(s) to limit a sliding motion of the singulated die.

  14. Vacuum die attach for integrated circuits

    DOEpatents

    Schmitt, E.H.; Tuckerman, D.B.

    1991-09-10

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

  15. Vacuum die attach for integrated circuits

    DOEpatents

    Schmitt, Edward H.; Tuckerman, David B.

    1991-01-01

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required.

  16. Sequence polymorphisms of Der f 1, Der p 1, Der f 2 and Der p 2 from Korean house dust mite isolates.

    PubMed

    Jeong, Kyoung Yong; Lee, In-Yong; Yong, Tai-Soon; Lee, Jae-Hyun; Kim, Eun-Jin; Lee, Joo-Shil; Hong, Chein-Soo; Park, Jung-Won

    2012-09-01

    Amino acid sequence variations have possible influences on the allergenicity of allergens and may be important factors in allergen standardization. This study was undertaken to investigate the sequence polymorphisms of group 1 and 2 allergens from Korean isolates of the house dust mites Dermatophagoides farinae and D. pteronyssinus. cDNA sequences encoding group 1 and 2 allergens were amplified by RT-PCR and compared the deduced amino acid sequences. Der f 1.0101, which appeared in 64.0 % of the 50 sequences analyzed, was found to be predominant. Among the Der p 1 sequences, Der p 1.0102 and 1.0105 were predominant (58 %). Among the Der f 2 sequences, Der f 2.0102 (40.7 %) and a new variant with Gly at position 42 (27.8 %) were predominant. The deduced amino acid sequences of 60 Der p 2 clones were examined, and 28 variants with 1-5 amino acid substitutions were found. Interestingly, all of the Der p 2 sequences had Thr instead of Lys at position 49. Two variants (Leu40, Thr49, and Asn114 (26.6 %); Val40, Thr49, and Asn114 (20.0 %)) were found to be the most predominant forms of Der p 2. Der p 1 has a high rate of sporadic substitutions and the group 2 allergens show a more regular pattern with orderly associations of amino acid substitutions. Der f 1 and Der p 2 from Korean mite isolates have unique amino acid sequence polymorphisms. These findings provide important data for house dust mite allergen standardization.

  17. The Right To Die. Public Talk Series.

    ERIC Educational Resources Information Center

    Pasquerella, Lynn

    This program guide on the right to die provides policy issue information where ethical concerns have a prominent place. Three positions about the right to die are presented: (1) mercy killing and assisted suicide should be legally permitted in certain cases; (2) legal status should be given to living wills and other advance directives that would…

  18. Energy Consumption of Die Casting Operations

    SciTech Connect

    Jerald Brevick; clark Mount-Campbell; Carroll Mobley

    2004-03-15

    Molten metal processing is inherently energy intensive and roughly 25% of the cost of die-cast products can be traced to some form of energy consumption [1]. The obvious major energy requirements are for melting and holding molten alloy in preparation for casting. The proper selection and maintenance of melting and holding equipment are clearly important factors in minimizing energy consumption in die-casting operations [2]. In addition to energy consumption, furnace selection also influences metal loss due to oxidation, metal quality, and maintenance requirements. Other important factors influencing energy consumption in a die-casting facility include geographic location, alloy(s) cast, starting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting machine, related equipment (robots, trim presses), and downstream processing (machining, plating, assembly, etc.). Each of these factors also may influence the casting quality and productivity of a die-casting enterprise. In a die-casting enterprise, decisions regarding these issues are made frequently and are based on a large number of factors. Therefore, it is not surprising that energy consumption can vary significantly from one die-casting enterprise to the next, and within a single enterprise as function of time.

  19. Prediction of Part Distortion in Die Casting

    SciTech Connect

    R. Allen Miller

    2005-03-30

    The die casting process is one of the net shape manufacturing techniques and is widely used to produce high production castings with tight tolerances for many industries. An understanding of the stress distribution and the deformation pattern of parts produced by die casting will result in less deviation from the part design specification, a better die design and eventually more productivity and cost savings. This report presents methods that can be used to simulate the die casting process in order to predict the deformation and stresses in the produced part and assesses the degree to which distortion modeling is practical for die casting at the current time. A coupled thermal-mechanical finite elements model was used to simulate the die casting process. The simulation models the effect of thermal and mechanical interaction between the casting and the die. It also includes the temperature dependant material properties of the casting. Based on a designed experiment, a sensitivity analysis was conducted on the model to investigate the effect of key factors. These factors include the casting material model, material properties and thermal interaction between casting and dies. To verify the casting distortion predictions, it was compared against the measured dimensions of produced parts. The comparison included dimensions along and across the parting plane and the flatness of one surface.

  20. Death and Dying: Issues for Educational Gerontologists.

    ERIC Educational Resources Information Center

    Wass, Hannelore, Myers, Jane E.

    1984-01-01

    Reviews research on death orientations, the dying process, and bereavement, with a major focus on the elderly. Suggests that relevant knowledge about death and dying are important for gerontological practitioners and proposes that death-related content be systematically integrated into academic curricula at the preservice and inservice levels.…

  1. Apparatus for restraining and transporting dies

    DOEpatents

    Allison, James W.; LaBarre, Timothy L.

    1994-01-01

    Apparatus for restraining and transporting dies in punch press operations is provided. A floatation platen for supporting a die on the platen's upper surface has a plurality of recessed gas exhaust ports on the platen's lower surface. A source of pressurized gas delivers gas to a platen manifold, for delivery to orifices located in the gas exhaust ports. The flow of gas is controlled by a first valve adjacent the gas source and a second valve adjacent the manifold, with the second valve being used to control the gas flow during movement of the die. In this fashion, a die may be moved on a cushion of air from one workstation to a selected second workstation. A moveable hydraulically operated restraining fixture is also provided, for clamping the die in position during the compacting phase, and for releasing the die after completion of the compacting phase by releasing the hydraulic pressure on the restraining fixture. When pressure in the hydraulic cylinders on the restraining fixture is reversed, the restraining fixture will retract so that there is no contact between the die and the restraining fixture, thereby allowing the die to be removed from a first workstation and moved to a second selected workstation.

  2. Student Nurses' Perception of Death and Dying

    ERIC Educational Resources Information Center

    Niederriter, Joan E.

    2009-01-01

    Student nurses are involved in caring for patients who are actively dying or who have been told they have a terminal illness and are faced with the process of dying. Students encounter these patients in hospitals, nursing homes, at home or in hospice care settings. According to Robinson (2004), "nurses are the healthcare providers that are most…

  3. Heterologous Expression of Der Homologs in an Escherichia coli der Mutant and Their Functional Complementation

    PubMed Central

    Choi, Eunsil; Kang, Nalae; Jeon, Young; Pai, Hyun-Sook

    2016-01-01

    ABSTRACT The unique Escherichia coli GTPase Der (double Era-like GTPase), which contains tandemly repeated GTP-binding domains, has been shown to play an essential role in 50S ribosomal subunit biogenesis. The depletion of Der results in the accumulation of precursors of 50S ribosomal subunits that are structurally unstable at low Mg2+ concentrations. Der homologs are ubiquitously found in eubacteria. Conversely, very few are conserved in eukaryotes, and none is conserved in archaea. In the present study, to verify their conserved role in bacterial 50S ribosomal subunit biogenesis, we cloned Der homologs from two gammaproteobacteria, Klebsiella pneumoniae and Salmonella enterica serovar Typhimurium; two pathogenic bacteria, Staphylococcus aureus and Neisseria gonorrhoeae; and the extremophile Deinococcus radiodurans and then evaluated whether they could functionally complement the E. coli der-null phenotype. Only K. pneumoniae and S. Typhimurium Der proteins enabled the E. coli der-null strain to grow under nonpermissive conditions. Sucrose density gradient experiments revealed that the expression of K. pneumoniae and S. Typhimurium Der proteins rescued the structural instability of 50S ribosomal subunits, which was caused by E. coli Der depletion. To determine what allows their complementation, we constructed Der chimeras. We found that only Der chimeras harboring both the linker and long C-terminal regions could reverse the growth defects of the der-null strain. Our findings suggest that ubiquitously conserved essential GTPase Der is involved in 50S ribosomal subunit biosynthesis in various bacteria and that the linker and C-terminal regions may participate in species-specific recognition or interaction with the 50S ribosomal subunit. IMPORTANCE In Escherichia coli, Der (double Era-like GTPase) is an essential GTPase that is important for the production of mature 50S ribosomal subunits. However, to date, its precise role in ribosome biogenesis has not been

  4. Influence of die geometry and material selection on the behavior of protective die covers in closed-die forging

    NASA Astrophysics Data System (ADS)

    Yu, Yingyan; Rosenstock, Dirk; Wolfgarten, Martin; Hirt, Gerhard

    2016-10-01

    Due to the fact that tooling costs make up to 30% of total costs of the final forged part, the tool life is always one main research topic in closed-die forging [1]. To improve the wear resistance of forging dies, many methods like nitriding and deposition of ceramic layers have been used. However, all these methods will lose its effect after a certain time, then tool repair or exchange is needed, which requires additional time and costs. A new method, which applies an inexpensive and changeable sheet metal on the forging die to protect it from abrasive wear, was firstly proposed in [2]. According to the first investigation, the die cover is effective for decreasing thermal and mechanical loads, but there are still several challenges to overcome in this concept, like wrinkling and thinning of the die cover. Therefore, an experimental study using different geometries and die cover materials is presented within this work. The results indicate the existence of feasible application cases of this concept, since conditions are found under which a die cover made of 22MnB5 still keeps its original shape even after 7 forging cycles.

  5. Expression of hypoallergenic Der f 2 derivatives with altered intramolecular disulphide bonds induces the formation of novel ER-derived protein bodies in transgenic rice seeds

    PubMed Central

    Yang, Lijun; Hirose, Sakiko; Suzuki, Kazuya; Hiroi, Takachika; Takaiwa, Fumio

    2012-01-01

    House dust mites (HDM) are the most common source of indoor allergens and are associated with allergic diseases worldwide. To benefit allergic patients, safer and non-invasive mucosal routes of oral administration are considered to be the best alternative to conventional allergen-specific immunotherapy. In this study, transgenic rice was developed expressing derivatives of the major HDM allergen Der f 2 with reduced Der f 2-specific IgE reactivity by disrupting intramolecular disulphide bonds in Der f 2. These derivatives were produced specifically as secretory proteins in the endosperm tissue of seeds under the control of the endosperm-specific glutelin GluB-1 promoter. Notably, modified Der f 2 derivatives aggregated in the endoplasmic reticulum (ER) lumen and were deposited in a unique protein body (PB)-like structure tentatively called the Der f 2 body. Der f 2 bodies were characterized by their intracellular localization and physico-chemical properties, and were distinct from ER-derived PBs (PB-Is) and protein storage vacuoles (PB-IIs). Unlike ER-derived organelles such as PB-Is, Der f 2 bodies were rapidly digested in simulated gastric fluid in a manner similar to that of PB-IIs. Oral administration in mice of transgenic rice seeds containing Der f 2 derivatives encapsulated in Der f 2 bodies suppressed Der f 2-specific IgE and IgG production compared with that in mice fed non-transgenic rice seeds, and the effect was dependent on the type of Der f 2 derivative expressed. These results suggest that engineered hypoallergenic Der f 2 derivatives expressed in the rice seed endosperm could serve as a basis for the development of viable strategies for the oral delivery of vaccines against HDM allergy. PMID:22378952

  6. The Basis System

    SciTech Connect

    Dubois, P.F.

    1989-05-16

    This paper discusses the basis system. Basis is a program development system for scientific programs. It has been developed over the last five years at Lawrence Livermore National Laboratory (LLNL), where it is now used in about twenty major programming efforts. The Basis System includes two major components, a program development system and a run-time package. The run-time package provides the Basis Language interpreter, through which the user does input, output, plotting, and control of the program's subroutines and functions. Variables in the scientific packages are known to this interpreter, so that the user may arbitrarily print, plot, and calculate with, any major program variables. Also provided are facilities for dynamic memory management, terminal logs, error recovery, text-file i/o, and the attachment of non-Basis-developed packages.

  7. Clamping instability and van der Waals forces in carbon nanotube mechanical resonators.

    PubMed

    Aykol, Mehmet; Hou, Bingya; Dhall, Rohan; Chang, Shun-Wen; Branham, William; Qiu, Jing; Cronin, Stephen B

    2014-05-14

    We investigate the role of weak clamping forces, typically assumed to be infinite, in carbon nanotube mechanical resonators. Due to these forces, we observe a hysteretic clamping and unclamping of the nanotube device that results in a discrete drop in the mechanical resonance frequency on the order of 5-20 MHz, when the temperature is cycled between 340 and 375 K. This instability in the resonant frequency results from the nanotube unpinning from the electrode/trench sidewall where it is bound weakly by van der Waals forces. Interestingly, this unpinning does not affect the Q-factor of the resonance, since the clamping is still governed by van der Waals forces above and below the unpinning. For a 1 μm device, the drop observed in resonance frequency corresponds to a change in nanotube length of approximately 50-65 nm. On the basis of these findings, we introduce a new model, which includes a finite tension around zero gate voltage due to van der Waals forces and shows better agreement with the experimental data than the perfect clamping model. From the gate dependence of the mechanical resonance frequency, we extract the van der Waals clamping force to be 1.8 pN. The mechanical resonance frequency exhibits a striking temperature dependence below 200 K attributed to a temperature-dependent slack arising from the competition between the van der Waals force and the thermal fluctuations in the suspended nanotube.

  8. Safety Basis Report

    SciTech Connect

    R.J. Garrett

    2002-01-14

    As part of the internal Integrated Safety Management Assessment verification process, it was determined that there was a lack of documentation that summarizes the safety basis of the current Yucca Mountain Project (YMP) site characterization activities. It was noted that a safety basis would make it possible to establish a technically justifiable graded approach to the implementation of the requirements identified in the Standards/Requirements Identification Document. The Standards/Requirements Identification Documents commit a facility to compliance with specific requirements and, together with the hazard baseline documentation, provide a technical basis for ensuring that the public and workers are protected. This Safety Basis Report has been developed to establish and document the safety basis of the current site characterization activities, establish and document the hazard baseline, and provide the technical basis for identifying structures, systems, and components (SSCs) that perform functions necessary to protect the public, the worker, and the environment from hazards unique to the YMP site characterization activities. This technical basis for identifying SSCs serves as a grading process for the implementation of programs such as Conduct of Operations (DOE Order 5480.19) and the Suspect/Counterfeit Items Program. In addition, this report provides a consolidated summary of the hazards analyses processes developed to support the design, construction, and operation of the YMP site characterization facilities and, therefore, provides a tool for evaluating the safety impacts of changes to the design and operation of the YMP site characterization activities.

  9. Is there a moral duty to die?

    PubMed

    Corlett, J A

    2001-01-01

    In recent years, there has been a great deal of philosophical discussion about the alleged moral right to die. If there is such a moral right, then it would seem to imply a moral duty of others to not interfere with the exercise of the right. And this might have important implications for public policy insofar as public policy ought to track what is morally right. But is there a moral duty to die? If so, under what conditions, if any, ought one to have such a duty, and why? In this paper, I distinguish between different moral grounds for the putative moral duty to die: deontological, intuitionist, and contractarian. Subsequently, I argue in support of Paul Menzel's theory of health care distribution. More precisely, I concur with his claim that there is a moral duty to die inexpensively in health care contexts. Then I provide and defend a philosophical analysis of the conditions in which such a duty could exist.

  10. House of Lords debates assisted dying (again).

    PubMed

    2003-07-01

    Lord Joffe's Patient (Assisted Dying) Bill (see Bulletin 187) had its Second Reading on 6 June. The debate was lively, informed and inevitably somewhat polarised. However, some common themes emerged and are outlined below.

  11. Casting Characteristics of Aluminum Die Casting Alloys

    SciTech Connect

    Makhlouf M. Makhlouf; Diran Apelian

    2002-02-05

    The research program investigates the casting characteristics of selected aluminum die casting alloys. Specifically, the alloys' tendencies towards die soldering and sludge formation, and the alloys' fluidity and machinability are evaluated. It was found that: When the Fe and Mn contents of the alloy are low; caution has to be taken against possible die soldering. When the alloy has a high sludge factor, particularly a high level of Fe, measures must be taken to prevent the formation of large hardspots. For this kind of alloy, the Fe content should be kept at its lowest allowable level and the Mn content should be at its highest possible level. If there are problems in die filling, measures other than changing the alloy chemistry need to be considered first. In terms of alloy chemistry, the elements that form high temperature compounds must be kept at their lowest allowable levels. The alloys should not have machining problems when appropriate machining techniques and machining parameters are used.

  12. Thick film silicon growth techniques. [die materials

    NASA Technical Reports Server (NTRS)

    Bates, H. E.; Mlavsky, A. I.; Jewett, D. N.; White, V. E.

    1973-01-01

    The research which was directed toward finding an improved die material is reported. Wetting experiments were conducted with various materials to determine their compatibility with silicon. Work has also continued toward the development of quartz as a die material as new techniques have provided more optimistic results than observed in the past. As a result of the thermal modification previously described, improvements in growth stability have contributed to an increase in ribbon quality.

  13. Machining of Silicon-Ribbon-Forming Dies

    NASA Technical Reports Server (NTRS)

    Menna, A. A.

    1985-01-01

    Carbon extension for dies used in forming silicon ribbon crystals machined precisely with help of special tool. Die extension has edges beveled toward narrow flats at top, with slot precisely oriented and centered between flats and bevels. Cutting tool assembled from standard angle cutter and circular saw or saws. Angle cutters cuts bevels while slot saw cuts slot between them. In alternative version, custom-ground edges or additional circular saws also cut flats simultaneously.

  14. Technische Systeme für den Herzersatz und die Herzunterstützung

    NASA Astrophysics Data System (ADS)

    Schöb, Reto; Loree, Howard M.

    Herzkrankheiten verursachen allein in den Vereinigten Staaten jährlich mehr als 700’000 Todesfälle. Ungefähr 3 Millionen Patienten in den U.S.A. leiden gemäss der American Heart Association (AHA) und dem National Heart, Lung and Blood Institute (NHLBI) an kongestivem Herzversagen (Congestive Heart Failure, CHF), welches eine chronische, sehr entkräftende und degenerative Krankheit ist: Das Herz ist dabei unfähig, hinreichend Blut zu den Organen des Körpers zu pumpen. Über 400’000 Fälle von CHF werden jedes Jahr diagnostiziert. Ähnliche Zahlen werden für Europa und Japan zusammen geschätzt. Basierend auf Daten vom AHA und NHLBI beträgt die fünfjährige Überlebensrate für CHF-Patienten lediglich etwa 50% [1]. 70’000-120’000 dieser Patienten könnten von einer Herzverpflanzung profitieren. 1999 wurden in den USA aber nur 2185 Herztransplantationen durchgeführt während die Warteliste über 4000 Patienten beträgt [2]. Ein akuter Mangel an Spenderherzen und die enormen Kosten (250’000-400’000 USD pro Patient) sind die begrenzenden Faktoren für Herztransplantationen [3]. Dies bedeutet, dass eine riesige Anzahl von Patienten durch ein zuverlässiges und verschleissfreies, nichtthrombotisches, total implantierbares, künstliches Herz gerettet werden könnten. Bis heute jedoch kein derartiges Implantat kommerziell verfügbar.

  15. Celestial Fireworks from Dying Stars

    NASA Astrophysics Data System (ADS)

    2011-04-01

    This image of the nebula NGC 3582, which was captured by the Wide Field Imager on the MPG/ESO 2.2-metre telescope at ESO's La Silla Observatory in Chile, shows giant loops of gas bearing a striking resemblance to solar prominences. These loops are thought to have been ejected by dying stars, but new stars are also being born within this stellar nursery. These energetic youngsters emit intense ultraviolet radiation that makes the gas in the nebula glow, producing the fiery display shown here. NGC 3582 is part of a large star-forming region in the Milky Way, called RCW 57. It lies close to the central plane of the Milky Way in the southern constellation of Carina (The Keel of Jason's ship, the Argo). John Herschel first saw this complex region of glowing gas and dark dust clouds in 1834, during his stay in South Africa. Some of the stars forming in regions like NGC 3582 are much heavier than the Sun. These monster stars emit energy at prodigious rates and have very short lives that end in explosions as supernovae. The material ejected from these dramatic events creates bubbles in the surrounding gas and dust. This is the probable cause of the loops visible in this picture. This image was taken through multiple filters. From the Wide Field Imager, data taken through a red filter are shown in green and red, and data taken through a filter that isolates the red glow characteristic of hydrogen are also shown in red. Additional infrared data from the Digitized Sky Survey are shown in blue. The image was processed by ESO using the observational data identified by Joe DePasquale, from the United States [1], who participated in ESO's Hidden Treasures 2010 astrophotography competition [2]. The competition was organised by ESO in October-November 2010, for everyone who enjoys making beautiful images of the night sky using astronomical data obtained using professional telescopes. Notes [1] Joe searched through ESO's archive and identified datasets that he used to compose his

  16. Living until we die: reflections on the dying person's spiritual agenda.

    PubMed

    Anderson, Herbert

    2006-03-01

    The spiritual agenda for the dying presumes a willingness to face the reality of imminent death. It also depends on support from caregivers who will encourage whatever agency is possible for the one who is dying. The spiritual practices that will enhance agency for the dying include remembering, thanking, relinquishing, waiting, and trusting. The absence of abandonment and the dependable presence of caregivers are essential to create communities and relationships in which hope can be found and sustained.

  17. Thermal Modelling In Pressure Die Casting

    NASA Astrophysics Data System (ADS)

    Rasgado, M. T. Alonso; Davey, K.; Watari, H.

    2004-06-01

    The pressure die casting process is cyclic and the temperature levels in the die are principally dictated by the total energy received from the casting. It is thus extremely important that any solidification model for the casting is able to predict energy extraction rates to a high degree of accuracy. In this paper an efficient three dimensional hybrid thermal model for the pressure die casting process is described. The finite element method (FEM) is used for modelling heat transfer in the casting, coupled to a boundary element (BE) model for the die. The FEM can efficiently account for the non-linearity introduced by the release of latent heat on solidification, whereas the BEM is ideally suited for modelling linear heat conduction in the die, as surface temperatures are of principal importance. The FE formulation for the casting is based on a control volume capacitance method, which is shown to provide high accuracy and stability. This method is similar to the apparent and effective heat capacitance methods, which are popular approaches used where conduction predominates over other heat transfer mechanisms. These methods involve the specification of element or nodal capacitances to accommodate for the release of latent heat. Unfortunately they suffer from a major drawback in that energy is not correctly transported through elements and so providing a source of inaccuracy. The control volume capacitance method allows for the transport of mass arising from volumetric shrinkage and ensures that energy is correctly transported. The BE model caters for surface phenomena such as boiling in the cooling channels, which is important, as this effectively controls the manner in which energy is extracted. The die temperature is decomposed into two components, one a steady-state part and the other a time-dependent perturbation. This approach enables the transient die temperatures to be calculated in an efficient way, since only die surfaces close to the die cavity are

  18. Simulationsbasierte Multisensorsystemauslegung

    NASA Astrophysics Data System (ADS)

    Denkena, B.; Möhring, H.-C.; Litwinski, K. M.

    Die vorliegende Arbeit beschreibt einen Aspekt der Entwicklung vernetzter Sensorsysteme: Die Multisensorsystemauslegung auf der Basis von FE-Simulationen. Es wird ein Konzept beschrieben, welches optimale Sensorkonfigurationen bestehend aus Sensoren verschiedener Bauart zur Überwachung verschiedenartiger Größen bestimmt. Darge-stellt sind die Ergebnisse der Anwendung an einem Element eines Werk-stückspannbaukastens.

  19. IntegraTUM Teilprojekt E-Mail: Aufbau eines mandantenfähigen Groupware-Services und seine Integration in Identity Management und E-Mail Infrastruktur der Technischen Universität München

    NASA Astrophysics Data System (ADS)

    Diehn, Max

    Die E-Mail-Infrastruktur an der Technischen Universität München (TUM) ist historisch bedingt sehr heterogen und komplex. Viele Einrichtungen müssen wertvolle Arbeitskraft auf die Administration eigener Mailserver verwenden. Auf der anderen Seite wird bei einigen Einrichtungen der Ruf nach Groupware-Funktionalitäten wie z.B. gemeinsame Kalender immer lauter. Das Teilprojekt E-Mail stellt einen zentralen Mail- und Groupware-Service bereit, der den Einrichtungen ermöglichen soll, den Betrieb eigener Server und zugehöriger Systeme (etwa lokaler Benutzerverwaltungen) für diesen Zweck aufzugeben und diese Dienste an das Teilprojekt E-Mail zu migrieren, ohne ihre Verwaltungshoheit oder ihre Maildomains aufgeben zu müssen. Dieser Service versteht sich als eine Ergänzung zur bestehenden Grundversorgung der TUM mit den Maildiensten des myTUM-Mailers, ist mandantenfähig aufgebaut und kann daher künftig neben der TUM auch weiteren Organisationen im Münchner Wissenschaftsnetz zur Verfügung gestellt werden.

  20. Compassionate community networks: supporting home dying.

    PubMed

    Abel, Julian; Bowra, Jon; Walter, Tony; Howarth, Glennys

    2011-09-01

    How may communities be mobilised to help someone dying at home? This conceptual article outlines the thinking behind an innovative compassionate community project being developed at Weston-super-Mare, UK. In this project, a health professional mentors the dying person and their carer to identify and match: (a) the tasks that need to be done and (b) the members of their social network who might help with these tasks. Network members may subsequently join a local volunteer force to assist others who are network poor. Performing practical tasks may be more acceptable to some family, friends and neighbours than having to engage in a conversation about dying, and provides a familiarity with dying that is often lacking in modern societies, so in this model, behavioural change precedes attitudinal change. The scheme rejects a service delivery model of care in favour of a community development model, but differs from community development schemes in which the mentor is a volunteer rather than a health professional, and also from those approaches that strive to build community capacity before any one individual dying person is helped. The pros and cons of each approach are discussed. There is a need for evaluation of this and similar schemes, and for basic research into naturally occurring resource mobilisation at the end of life.

  1. Highly sensitive measurements of substrates and inhibitors on the basis of tyrosinase sensors and recycling systems

    NASA Astrophysics Data System (ADS)

    Streffer, Katrin

    2002-12-01

    ötigten Probenvolumina sind klein und eine spezielle Probenvorbereitung ist nicht erforderlich. Ausserdem sind die Geräte einfach zu handhaben, billig sowohl in ihrer Herstellung als auch im Gebrauch und meist erlauben sie sogar eine kontinuierliche Messwerterfassung. Zahlreiche dieser in den letzten Jahren entwickelten Geräte greifen zurück auf 40 Jahre Forschung auf dem Gebiet der Biosensorik. Seit Clark und Lyons im Jahr 1962 in der Lage waren, mit einer einfachen Sauerstoffelektrode, ergänzt durch ein Enzym, Glucose zu messen, war die Entwicklung neuer Messtechnik nicht mehr aufzuhalten. Biosensoren, spezielle Messfühler, die aus einer Kombination aus biologischer Komponente (erlaubt eine spezifische Erkennung des Analyten auch ohne vorherige Reinigung der Probe) und einem physikalischen Messfühler (wandelt den primären physikochemischen Effekt in ein elektronisch messbares Signal um) bestehen, eroberten den Markt. Im Rahmen dieser Doktorarbeit wurden verschiedene Tyrosinasesensoren entwickelt, die je nach Herkunft und Eigenschaften der verwendeten Tyrosinase unterschiedliche Anforderungen erfüllen. Beispielsweise wurde einer dieser Tyrosinasesensoren für die Bestimmung phenolischer Verbindungen in Fluss- und Seewasserproben eingesetzt, und die mit diesem Sensor gemessenen Ergebnisse konnten sehr gut mit dem entsprechenden DIN-Test zur Bestimmung phenolischer Verbindungen korreliert werden. Ein anderer entwickelter Sensor zeigte eine sehr hohe Empfindlichkeit für Catecholamine, Substanzen die speziell in der medizinischen Diagnostik von Wichtigkeit sind. Ausserdem zeigten die ebenfalls im Rahmen dieser Doktorarbeit durchgeführten Untersuchungen zweier verschiedener Tyrosinasen, dass, will man in Zukunft noch empfindlichere Tyrosinasesensoren entwickeln, eine spezielle Tyrosinase (Tyrosinase aus Streptomyces antibioticus) die bessere Wahl sein wird, als die bisher im Bereich der Biosensorforschung verwendete Tyrosinase aus Agaricus bisporus. Desweiteren wurden erste

  2. Neuromechanical Basis of Kinesiology.

    ERIC Educational Resources Information Center

    Enoka, Roger M.

    This textbook provides a scientific basis for the study of human motion. The eight chapters are organized under three major sections. Part One--The Force-Motion Relationship--contains chapters on (1) motion; (2) force; (3) types of movement analysis. In Part Two--The Simple Joint System--chapters concern (4) simple joint system components; (5)…

  3. Electron acceleration at localized wave structures in the solar corona (German Title: Elektronenbeschleunigung an lokalen Wellenstrukturen in der Sonnenkorona)

    NASA Astrophysics Data System (ADS)

    Miteva, Rositsa Stoycheva

    2007-07-01

    in the electric and magnetic wave field within just several whistler periods. While gaining energy from the whistler wave field, the electrons reach the shock front and, subsequently, a major part of them are reflected back into the upstream region, since the shock accompanied with a jump of the magnetic field acts as a magnetic mirror. Co-moving with the whistlers now, the reflected electrons are out of resonance and hence can propagate undisturbed into the far upstream region, where they are detected in terms of type II metric radio bursts. In summary, the kinetic energy of protons is transfered into electrons by the action of localized wave structures in both cases, i.e., at jets outflowing from the magnetic reconnection site and at shock waves in the corona. Die Sonne ist ein aktiver Stern, was sich nicht nur in den allseits bekannten Sonnenflecken, sondern auch in Flares manifestiert. Während Flares wird eine große Menge gespeicherter, magnetischer Energie in einer kurzen Zeit von einigen Sekunden bis zu wenigen Stunden in der Sonnenkorona freigesetzt. Dabei werden u.a. energiereiche Elektronen erzeugt, die ihrerseits nichtthermische Radio- und Röntgenstrahlung, wie sie z.B. am Observatorium für solare Radioastronomie des Astrophysikalischen Instituts Potsdam (AIP) in Tremsdorf und durch den NASA-Satelliten RHESSI beobachtet werden, erzeugen. Da diese Elektronen einen beträchtlichen Anteil der beim Flare freigesetzten Energie tragen, ist die Frage, wie Elektronen in kurzer Zeit auf hohe Energien in der Sonnenkorona beschleunigt werden, von generellem astrophysikalischen Interesse, da solche Prozesse auch in anderen Sternatmosphären und kosmischen Objekten, wie z.B. Supernova-Überresten, stattfinden. In der vorliegenden Dissertation wird die Elektronenbeschleunigung an lokalen Wellenstrukturen im Plasma der Sonnenkorona untersucht. Solche Wellen treten in der Umgebung der magnetischen Rekonnektion, die als ein wichtiger Auslöser von Flares angesehen wird

  4. CAE Based Die Face Engineering Development to Contribute to the Revitalization of the Tool & Die Industry

    NASA Astrophysics Data System (ADS)

    Tang, Arthur; Lee, Wing C.; St. Pierre, Shawn; He, Jeanne; Liu, Kesu; Chen, Chin C.

    2005-08-01

    Over the past two decades, the Computer Aided Engineering (CAE) tools have emerged as one of the most important engineering tools in various industries, due to its flexibility and accuracy in prediction. Nowadays, CAE tools are widely used in the sheet metal forming industry to predict the forming feasibility of a wide variety of complex components, ranging from aerospace and automotive components to household products. As the demand of CAE based formability accelerates, the need for a robust and streamlined die face engineering tool becomes more crucial, especially in the early stage when the tooling layout is not available, but a product design decision must be made. Ability to generate blank, binder and addendum surfaces with an appropriate layout of Drawbead, Punch Opening Line, Trim Line are the primary features and functions of a CAE based die face engineering tool. Once the die face layout is ready, a formability study should be followed to verify the die face layout is adequate to produce a formable part. If successful, the established die face surface should be exported back to the CAD/CAM environment to speed up the tooling and manufacturing design process with confidence that this particular part is formable with this given die face. With a CAE tool as described above, the tool & die industry will be greatly impacted as the processes will enable the bypass of hardware try-out and shorten the overall vehicle production timing. The trend has shown that OEMs and first tiers will source to low cost producers in the world which will have a negative impact to the traditional tool & die makers in the developed countries. CAE based tool as described should be adopted, along with many other solutions, in order to maintain efficiency of producing high quality product and meeting time-to-market requirements. This paper will describe how a CAE based die face engineering (DFE) tool could be further developed to enable the traditional tool & die makers to meet the

  5. Helmholtz's early empiricism and the Erhaltung der Kraft.

    PubMed

    Jurkowitz, Edward

    2010-01-01

    Hermann Helmholtz has often been understood to have started research under the influence of Kant, and then to have made a transition to a later mature empiricist phase. Without claiming that in 1847 Helmholtz held the same positions that he later espoused, I suggest that already in his 1847 'Uber die Erhaltung der Kraft' one may find important aspects of his later empiricism. I highlight the ways in which, from early on, Helmholtz turned Kant to use in developing an empirical program of inquiry into possible basic natural causes. To that end, I indicate how, throughout his arguments, Helmholtz employed, sometimes explicitly, but often tacitly, an empiricist logic, one that ran contrary to any form of transcendental deduction, and even to all a priori knowledge. Instead of deriving aspects about the ultimate constituents of nature, Helmholtz aimed to define the proper project for physical natural science. The first part of the paper describes the context of discussion in which Helmholtz entered. The bulk of the paper then analyzes Helmholtz's arguments in order to make space between (1) Kantian, and other, deductions of characteristics that must be true of nature and (2) Helmholtz's delineation of empirically determinable characteristics of presumed ultimate elements of nature, ones that he meant to be specified and delimited through future experimental research. The paper highlights that throughout his discussion Helmholtz meant to define the proper project for physical natural science, a project rife with empiricist aspects.

  6. Integrable extended van der Waals model

    NASA Astrophysics Data System (ADS)

    Giglio, Francesco; Landolfi, Giulio; Moro, Antonio

    2016-10-01

    Inspired by the recent developments in the study of the thermodynamics of van der Waals fluids via the theory of nonlinear conservation laws and the description of phase transitions in terms of classical (dissipative) shock waves, we propose a novel approach to the construction of multi-parameter generalisations of the van der Waals model. The theory of integrable nonlinear conservation laws still represents the inspiring framework. Starting from a macroscopic approach, a four parameter family of integrable extended van der Waals models is indeed constructed in such a way that the equation of state is a solution to an integrable nonlinear conservation law linearisable by a Cole-Hopf transformation. This family is further specified by the request that, in regime of high temperature, far from the critical region, the extended model reproduces asymptotically the standard van der Waals equation of state. We provide a detailed comparison of our extended model with two notable empirical models such as Peng-Robinson and Soave's modification of the Redlich-Kwong equations of state. We show that our extended van der Waals equation of state is compatible with both empirical models for a suitable choice of the free parameters and can be viewed as a master interpolating equation. The present approach also suggests that further generalisations can be obtained by including the class of dispersive and viscous-dispersive nonlinear conservation laws and could lead to a new type of thermodynamic phase transitions associated to nonclassical and dispersive shock waves.

  7. Dogmatic Basis of Jihad and Martyrdom

    DTIC Science & Technology

    2011-07-06

    drowning, killed by a collapsing building, die in the path of (the Deity)ccxlviii,ccxlix; die of pleurisy , in a fire, or a woman who dies in child...killed in the way of Allah. Someone who is killed by the plague is a martyr, someone who drowns is a martyr, someone who dies of pleurisy is a martyr

  8. High moisture corn stover pelleting in a flat die pellet mill fitted with a 6 mm die: physical properties and specific energy consumption

    SciTech Connect

    Tumuluru, Jaya Shankar

    2015-06-15

    The quality and specific energy consumption (SEC) of the biomass pellets produced depend upon pelleting process conditions. The present study includes understanding the effect of feedstock moisture in the range of 28–38% (wet basis [w.b.]) and preheating in the range of 30–110°C at two die speeds of 40 and 60 Hz on the physical properties and SEC. A flat die pellet mill fitted with a 6 mm die was used in the present study. The physical properties of pellets such as moisture content, unit, bulk and tapped density, durability, and expansion ratio and SEC of the pelleting process are measured. The results indicate that the pellets produced have durability values in the range of 87–98%, and unit bulk and tapped density in the range of 670–1100, 375–575, and 420–620 kg/m³. Increasing the feedstock moisture content from 33% to 38% (w.b) decreased the unit, bulk and tapped density by about 30–40%. Increasing feedstock moisture content increased the expansion ratio and decreased the density values. A higher feedstock moisture content of 38% (w.b.) and higher preheating temperature of 110°C resulted in lower density and a higher expansion ratio, which can be attributed to flash off of moisture as the material extrudes out of the die. The SEC was in the range of 75–275 kWh/ton. Higher feedstock moisture content of 38% (w.b.) and a lower die speed of 40 Hz increased the SEC, whereas lower to medium preheating temperature (30–70°C), medium feedstock moisture content of 33% (w.b.), and a higher die speed of 60 Hz minimized the SEC to <100 kWh/ton.

  9. High moisture corn stover pelleting in a flat die pellet mill fitted with a 6 mm die: physical properties and specific energy consumption

    DOE PAGES

    Tumuluru, Jaya Shankar

    2015-06-15

    The quality and specific energy consumption (SEC) of the biomass pellets produced depend upon pelleting process conditions. The present study includes understanding the effect of feedstock moisture in the range of 28–38% (wet basis [w.b.]) and preheating in the range of 30–110°C at two die speeds of 40 and 60 Hz on the physical properties and SEC. A flat die pellet mill fitted with a 6 mm die was used in the present study. The physical properties of pellets such as moisture content, unit, bulk and tapped density, durability, and expansion ratio and SEC of the pelleting process are measured.more » The results indicate that the pellets produced have durability values in the range of 87–98%, and unit bulk and tapped density in the range of 670–1100, 375–575, and 420–620 kg/m³. Increasing the feedstock moisture content from 33% to 38% (w.b) decreased the unit, bulk and tapped density by about 30–40%. Increasing feedstock moisture content increased the expansion ratio and decreased the density values. A higher feedstock moisture content of 38% (w.b.) and higher preheating temperature of 110°C resulted in lower density and a higher expansion ratio, which can be attributed to flash off of moisture as the material extrudes out of the die. The SEC was in the range of 75–275 kWh/ton. Higher feedstock moisture content of 38% (w.b.) and a lower die speed of 40 Hz increased the SEC, whereas lower to medium preheating temperature (30–70°C), medium feedstock moisture content of 33% (w.b.), and a higher die speed of 60 Hz minimized the SEC to <100 kWh/ton.« less

  10. Effect of Die Strength and Work Piece Strength on the Wear of Hot Forging Dies

    NASA Astrophysics Data System (ADS)

    Levy, B. S.; Van Tyne, C. J.

    2015-01-01

    The effect of the strength ratio extracted from an Archard model for wear is used to describe the wear rates expected in hot forging dies. In the current study, the strength ratio is the strength of the hot forging die to the strength of the work piece. Three hot forging die steels are evaluated. The three die steels are FX, 2714, and WF. To determine the strength of the forging die, a continuous function has been developed that describes the yield strength of three die steels for temperatures from 600 to 700 °C and for times up to 20 h (i.e., tempering times of up to 20 h). The work piece material is assumed to be AISI 1045. Based on the analysis, the wear resistance of WF should be superior and FX should be slightly better than 2714. Decreasing the forging temperature increases the strength ratio, because the strength of the die surface increases faster than the flow strength of AISI 1045. The increase in the strength ratio indicates a decrease in the expected wear rate.

  11. Investigation of Die Stress Profiles during Powder Compaction using Instrumented Die

    SciTech Connect

    Hong, Sung-tae; Hovanski, Yuri; Lavender, Curt A.; Weil, K. Scott

    2008-06-01

    The radial stress profile in a cylindrical die during compaction of titanium (Ti) powder was investigated by experiments. The concept of an instrumented die was extended to design an enhanced instrumented die. Custom-made strain gage pins were used to measure the radial stress during powder compaction. The test fixture was designed to simulate double-action pressing. The measured die stress profile for Ti powder was compared with that for a commercially available iron (Fe) powder. The stress history shows that an appreciable residual stress remains in the die in the radial direction after the axial compaction stress is removed from the powder. Furthermore, the radial stress profile in the die, while under maximum axial compaction stress, is more uniform across the height of the Fe compact than that of the Ti compact. In addition, the residual stress profile in the die in the radial direction reduces symmetrically in both directions beyond the height of the compact for both powders. Finally, the Ti powder shows a significantly higher frictional coefficient at the maximum axial compaction stress, and consequently a higher maximum axial ejection stress than the Fe powder.

  12. A profile of silicosis cases who died.

    PubMed

    Phoon, W H

    1982-01-01

    Silicosis cases which had been notified by doctors and confirmed after investigations were followed up by the Industrial Health Division. Up to August 1981, a total of 313 persons were confirmed as having the disease. Of these, 59 had died. The majority of these 59 persons had had their silica exposure in the granite quarries. 13 had been exposed to "rubber powder" which contained a high percentage of free silica. 52 of those who died were male, and their average age at death was 60.87 years. This did not appear to be significantly shorter than their life expectancy of 65.1 years. But the average age of death for the 7 women was 58.86 years, which was much shorter than their life expectancy of 70 years. Many of the men died from causes unrelated to silicosis. But 6 of the 7 women had progressive massive fibrosis (PMF) and they apparently died of the disease or complications arising from it.

  13. Expectation and Variation with a Virtual Die

    ERIC Educational Resources Information Center

    Watson, Jane; English, Lyn

    2015-01-01

    By the time students reach the middle years they have experienced many chance activities based on dice. Common among these are rolling one die to explore the relationship of frequency and theoretical probability, and rolling two dice and summing the outcomes to consider their probabilities. Although dice may be considered overused by some, the…

  14. Stamping Die Making. 439-318/320.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on stamping die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 29 units in this guide, dealing with the following topics: EZ-MILL programming; EZ-MILL BATT; print of punch and EZ-MILL part programming; download to Computer Numerical…

  15. Care of the Dying: A Swedish Perspective

    ERIC Educational Resources Information Center

    Feigenberg, Loma; Fulton, Robert

    1977-01-01

    This article illustrates various aspects of terminal care, and shows that rules and norms for such care do not exist today. The authors advocate the formulation of an aim for humane treatment of dying patients, and its application in a manner appropriate to Swedish medical concepts and Swedish conditions. (Author)

  16. Asymmetric Die Grows Purer Silicon Ribbon

    NASA Technical Reports Server (NTRS)

    Kalejs, J. P.; Chalmers, B.; Surek, T.

    1983-01-01

    Concentration of carbide impurities in silicon ribbon is reduced by growing crystalline ribbon with die one wall higher than other. Height difference controls shape of meniscus at liquid/crystal interface and concentrates silicon carbide impurity near one of broad faces. Opposite face is left with above-average purity. Significantly improves efficiency of solar cells made from ribbon.

  17. Ceramic for Silicon-Shaping Dies

    NASA Technical Reports Server (NTRS)

    Sekercioglu, I.; Wills, R. R.

    1982-01-01

    Silicon beryllium oxynitride (SiBON) is a promising candidate material for manufacture of shaping dies used in fabricating ribbons or sheets of silicon. It is extremely stable, resists thermal shock, and has excellent resistance to molten silicon. SiBON is a solid solution of beryllium silicate in beta-silicon nitride.

  18. The Onion and "When Legends Die."

    ERIC Educational Resources Information Center

    Bell, Loren C.

    1984-01-01

    Describes the eight layers in Thomas Black Bull's ("When the Legends Die") journey to spiritual rebirth and stresses that students can easily identify these layers and can thereby achieve a clearer understanding of the relationship between structure and meaning in fiction. (CRH)

  19. Counseling Older Persons: Careers, Retirement, Dying.

    ERIC Educational Resources Information Center

    Sinick, Daniel

    The focus of this monograph is on three areas of counseling with older clients: career counseling, retirement counseling, and counseling regarding death and dying. The portion on career counseling includes reasons older persons change careers, obstacles they are likely to face when seeking employment, myths surrounding the employability of older…

  20. Mold Die Making. 439-322/324.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on mold die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 10 units in this guide: (1) introduction to Electrical Discharge Machining (EDM); (2) EDM principles; (3) the single pulse; (4) EDM safety; (5) electrode material; (6) electrode…

  1. [Companionship for women dying of AIDS].

    PubMed

    Gerlach, E

    1999-01-01

    This report reflects the experience of accompanying HIV-infected women during the process of dying using their curriculi vitae as examples of different modes of dealing with fatal illness. The text contains paintings of past and contemporary art concerning death and eros and poetry as a form of therapy.

  2. The Academic Study of Death and Dying.

    ERIC Educational Resources Information Center

    Amend, Edward W.

    The current study of death and dying is an example of constant change and development in academic disciplines. While the discussion of death in time of crisis is hard, if not impossible, youthful undergraduates find this topic to be of considerable interest. For them, a course can be organized effectively as a small and intimate seminar, which…

  3. Efficient thermoelectric van der Pauw measurements

    NASA Astrophysics Data System (ADS)

    de Boor, Johannes; Schmidt, Volker

    2011-07-01

    The development of powerful thermoelectric materials requires fast and simple characterization techniques. We combine three measurements to obtain a complete thermoelectric characterization. The electrical conductivity is measured by the van der Pauw method, while ZT is determined directly by means of a Harman measurement. Finally, exploiting the analogy between electrical and thermal physics, a thermal van der Pauw measurement is performed and the sample Seebeck coefficient and thermal conductivity can be determined. No temperature differences need to be measured; all quantities can be deduced from voltage measurements concurrently on the same sample which allows for quick and convenient material screening.

  4. Dynamical screening of the van der Waals interaction between graphene layers.

    PubMed

    Dappe, Y J; Bolcatto, P G; Ortega, J; Flores, F

    2012-10-24

    The interaction between graphene layers is analyzed combining local orbital DFT and second order perturbation theory. For this purpose we use the linear combination of atomic orbitals-orbital occupancy (LCAO-OO) formalism, that allows us to separate the interaction energy as the sum of a weak chemical interaction between graphene layers plus the van der Waals interaction (Dappe et al 2006 Phys. Rev. B 74 205434). In this work, the weak chemical interaction is calculated by means of corrected-LDA calculations using an atomic-like sp(3)d(5) basis set. The van der Waals interaction is calculated by means of second order perturbation theory using an atom-atom interaction approximation and the atomic-like-orbital occupancies. We also analyze the effect of dynamical screening in the van der Waals interaction using a simple model. We find that this dynamical screening reduces by 40% the van der Waals interaction. Taking this effect into account, we obtain a graphene-graphene interaction energy of 70 ± 5 meV/atom in reasonable agreement with the experimental evidence.

  5. [The shipwreck of "Der Brandtaucher" in the then territory of the Danish monarchy - in Kiel's harbor - February 1, 1851].

    PubMed

    Brorson, I

    1997-01-01

    This article describes the first German submarine - "Der Brandtaucher" - constructed in Schleswig-Holstein by Wilhelm V. Bauer in 1850. The submarine was built as a special weapon to attack the Danish blokading warships of the harbour of Kiel during the First Danish-German War 1848-51. The military-medical aspects are dealing with the shipwreck of a submarine because of an overpressure during submerge, and the rescue of its crew of 3 men through a "free ascent" of 52 feet - followed by comments of today. As for the description of the construction of "Der Brandtaucher", the shipwreck and the "free ascent", it was originally retold in German by Gerd Stolz in his book: "Die Schleswig-Holsteinische Marine 1848-1852". (1987).

  6. TÜV - Zertifizierungen in der Life Science Branche

    NASA Astrophysics Data System (ADS)

    Schaff, Peter; Gerbl-Rieger, Susanne; Kloth, Sabine; Schübel, Christian; Daxenberger, Andreas; Engler, Claus

    Life Sciences [1] (Lebenswissenschaften) sind ein globales Innovationsfeld mit Anwendungen der Bio- und Medizinwissenschaften, der Pharma-, Chemie-, Kosmetik- und Lebensmittelindustrie. Diese Branche zeichnet sich durch eine stark interdisziplinäre Ausrichtung aus, mit Anwendung wissenschaftlicher Erkenntnisse und Einsatz von Ausgangsstoffen aus der modernen Biologie, Chemie und Humanmedizin sowie gezielter marktwirtschaftlich orientierter Arbeit.

  7. Radioactive Waste Management Basis

    SciTech Connect

    Perkins, B K

    2009-06-03

    The purpose of this Radioactive Waste Management Basis is to describe the systematic approach for planning, executing, and evaluating the management of radioactive waste at LLNL. The implementation of this document will ensure that waste management activities at LLNL are conducted in compliance with the requirements of DOE Order 435.1, Radioactive Waste Management, and the Implementation Guide for DOE Manual 435.1-1, Radioactive Waste Management Manual. Technical justification is provided where methods for meeting the requirements of DOE Order 435.1 deviate from the DOE Manual 435.1-1 and Implementation Guide.

  8. Note on a van der Waals Gas.

    ERIC Educational Resources Information Center

    Bauman, Robert P.; Harrison, Joseph G.

    1996-01-01

    Discusses the difficulties with the standard model for introduction of attractive forces into the van der Waals equation. Presents an analysis in terms of force and time delays and an alternative analysis for more advanced students in terms of energy. (JRH)

  9. The Forced van der Pol Equation

    ERIC Educational Resources Information Center

    Fay, Temple H.

    2009-01-01

    We report on a study of the forced van der Pol equation x + [epsilon](x[superscript 2] - 1)x + x = F cos[omega]t, by solving numerically the differential equation for a variety of values of the parameters [epsilon], F and [omega]. In doing so, many striking and interesting trajectories can be discovered and phenomena such as frequency entrainment,…

  10. Die regionalökonomische Bedeutung der Wissenschaft für das Ruhrgebiet. Hochschulen und außeruniversitäre Forschungseinrichtungen als Motor der regionalen Entwicklung

    NASA Astrophysics Data System (ADS)

    Kriegesmann, Bernd; Böttcher, Matthias; Lippmann, Torben

    2016-09-01

    The Ruhr area has advanced to the largest university region in Germany - often unnoticed within and outside. At the same time scientific institutions have become a major economic factor. Because of the higher and extra-university research institutions about 2.5 billion euros are effective as a demand potential in the region. 1.7 billion euros of this amount are directly associated with investments and operating expenditures of the scientific institutions as well as consumptions of employees and students. Additional 770 million euros result in revenues of many branches such as trade, housing, gastronomy sector, handcraft industry etc. It should not be underestimated that higher and extra-university research institutions generate with their research activities particular funding from the European Union or the rest of Germany for benefit of the region. Each euro spent by the state government for basic funding creates 39 cents third-party funding. These regional-economic effects result in noticeable employment impacts within the region. Around 25,000 people are directly employed in higher and extra-university research institutes or student unions (Studierendenwerke), about 22,000 jobs in other economic sectors are ensured or created by the induced demand. Science has thus become an important economic factor and represents an essential counterbalance to employment decline in shrinking industries of the region. The specific inclusion of science in a regional development strategy and targeted relining with appropriate measures to strengthen the science creates therefore an effective starting point for the design of structural change.

  11. The Influence of Surface Roughness and Bubbles on Sea Surface Acoustic Backscattering (Der Einfluss von Seegangsrauhigkeit und Blasen auf die Akustischen Rueckstreueigen-Schaften der Meeresoberflaeche)

    DTIC Science & Technology

    1987-11-12

    s’.gn,,ficant waveheight H1/3 (longer average times arn seicctable), * a plot of the power spectral density averaged over 0.5 hour- or 4 hours...America, vol. 61, no.2, February 1977, pp. 325-337. 5. B. Nuetzel and R. Jacobsen , Beschreibung des Nachhall-Messplatzes, Interner FWG-Bericht 1985-7

  12. Die Biomasse mariner Makrobenthos-Gesellschaften im Einflußbereich der Klärschlammverklappung vor der Elbemündung

    NASA Astrophysics Data System (ADS)

    Mühlenhardt-Siegel, U.

    1981-12-01

    The macrofauna of a dumping area in the eastern part of the German Bight (North Sea) was investigated in July, August and November, 1978 at five stations situated on a transect including central and peripheral areas of the dumping region. Abundance and biomass (ash free dry weight) of the macrofauna and its variation from July to November were analysed as well as the biomass of different taxa. Molluscs dominated over polychaetes, crustaceans and echinoderms. A positive correlation seemed to exist between mud content and biomass at the peripherally situated stations. In the central sewage sludge area, however, the biomass values were reduced. In late autumn the biomass decreased in the entire area due to the death of Diastylis rathkei, Abra alba and Pectinaria koreni. These species were replaced by the mollusc Nucula turgida and polychaete Nephtys hombergii. In autumn the biomass values also showed a distinct minimum at the central stations.

  13. Der Wissenstransfer von Innovationen--Die Perspektive der Schulen als Aktive Handlungseinheiten (The Transfer of Knowledge on Innovations--The Perspective of Schools as Active Units of Action).

    ERIC Educational Resources Information Center

    Wiechmann, Jurgen

    2003-01-01

    Evaluates German schools (n=402) that provide general education. Documents different ways of knowledge transfer in these schools. Examines the impact of different influence factors on the use of these transfer examples. Discusses the model of active use of knowledge and the transfer of knowledge throughout the school system. (CAJ)

  14. Spiritual aspects of death and dying.

    PubMed Central

    Mermann, A. C.

    1992-01-01

    Dying is an event beyond our comprehension, an experience that can only be imagined. Patients with cancer have a gift denied many others: some time to prepare for the approaching end of life. This time can be used to bring old conflicts to a close, to say goodbye and seek forgiveness from others, to express love and gratitude for the gifts of a life. Physicians can help patients by being aware of the spiritual dimensions to life that many patients have. In major religious traditions, death is accepted as the natural end of the gift of life and as a point of transition to another, yet unknown, existence. For many patients, it is not death that is feared, but abandonment. The physician's awareness of the spiritual needs of patients can make care of the dying more rewarding and fulfilling for all concerned. PMID:1519377

  15. Architecture for on-die interconnect

    SciTech Connect

    Khare, Surhud; More, Ankit; Somasekhar, Dinesh; Dunning, David S.

    2016-03-15

    In an embodiment, an apparatus includes: a plurality of islands configured on a semiconductor die, each of the plurality of islands having a plurality of cores; and a plurality of network switches configured on the semiconductor die and each associated with one of the plurality of islands, where each network switch includes a plurality of output ports, a first set of the output ports are each to couple to the associated network switch of an island via a point-to-point interconnect and a second set of the output ports are each to couple to the associated network switches of a plurality of islands via a point-to-multipoint interconnect. Other embodiments are described and claimed.

  16. Clayton's compromises and the assisted dying debate.

    PubMed

    Parker, Malcolm

    2015-03-01

    Richard Huxtable has recently argued that while assisted dying has been both repeatedly condemned and commended, a compromise resolution is possible. Following critique of other purported solutions, he argues for a new legal offence of "compassionate killing" as a plausible compromise between supporters and opponents of legalised assisted dying, because it offers something of significance to both sides. However, it turns out that "compassionate killing" would leave both sides with insufficient net benefit for the proposal to qualify as a compromise between them. By analogy with another apparently intractable bioethical debate, concerning destructive embryo research, this column rejects Huxtable's solution as another "Clayton's compromise". True compromise is not possible in bioethical debates involving divisions over deeply held values and world views. Resolving such debates inevitably involves the substitution of one dominant world view with another.

  17. Fewer Patients Die During Hospital Inspection Weeks: Study

    MedlinePlus

    ... 164254.html Fewer Patients Die During Hospital Inspection Weeks: Study Slight differences in death rates were possibly ... likely to die if they are treated during weeks that inspectors are checking on the staff, a ...

  18. Historical review of die drool phenomenon during plastics extrusion

    NASA Astrophysics Data System (ADS)

    Musil, Jan; Zatloukal, Martin

    2013-04-01

    Die drool phenomenon is defined as unwanted spontaneous accumulation of extruded polymer melt on open faces of extrusion die during extrusion process. Such accumulated material builds up on the die exit and frequently or continually sticks onto the extruded product and thus damages it. Since die drool appears, extrusion process must be shut down and die exit must be manually cleaned which is time and money consuming. Although die drool is complex phenomenon and its formation mechanism is not fully understood yet, variety of proposed explanations of its formation mechanism and also many ways to its elimination can be found in open literature. Our review presents in historical order breakthrough works in the field of die drool research, shows many ways to suppress it, introduces methods for its quantitative evaluation and composition analysis and summarizes theories of die drool formation mechanism which can be helpful for extrusion experts.

  19. Crystallization and Preliminary X-ray Analysis of Der f 2, a Potent Allergen Derived from the House Dust Mite

    NASA Technical Reports Server (NTRS)

    Roeber, Dana; Achari, Aniruddha; Takai, Toshiro; Okumura, Yasushi; Scott, David L.; Curreri, Peter (Technical Monitor)

    2002-01-01

    Although a number of allergens have been identified and isolated, the underlying molecular basis for the potent immune response is poorly understood. House dust mites (Dermatophugoides sp.) are particularly ubiquitous contributors to atopy in developed countries. The rhinitis, dermatitis, and asthma associated with allergic reactions to these arthropods are often caused by relatively small (125-129 amino acids) mite proteins of unclear biological function. Der f 2, a major allergen from the mite Dermatophagoides farinae, has been recombinantly expressed and characterized. The Der f 2 protein has been crystallized in our laboratory and a native data set collected at a synchrotron source. The crystals belong to the orthorhombic space group I422 with unit cell parameters of a = 95.2 Angstroms, b = 95.2 Angstroms, and c = 103.3 Angstroms. An essentially complete (97.2%) data set has been collected to 2.4 Angstroms. Attempts to solve the crystal structure of Der f 2 by molecular replacement using the available NMR coordinates for either Der f 2 or Der p 2 (the homologous protein from D. pterovssinus) failed to reveal a creditable solution.

  20. FAST TRACK COMMUNICATION: A variational principle behind the van der Waals picture of strongly coupled plasmas

    NASA Astrophysics Data System (ADS)

    Frusawa, Hiroshi

    2009-02-01

    Various strong coupling theories of the one-component plasma have successfully predicted the thermodynamic and structural properties by separating the Coulomb potential into short- and long-ranged parts in ad hoc ways. Moreover, it has been demonstrated that the density-density correlation function in a mimic system with only short-ranged interactions resembles that of the full Coulomb system, revealing that the van der Waals picture applies to the strongly coupled Coulomb systems. Here we present a variational theory forming the basis of the van der Waals picture. Our approach provides hybrid formulations which combine both the liquid state theory and statistical field theory; essential use is made of the coarse-grained system with only the long-ranged part of Coulomb interactions as a reference system in introducing both the lower bound variational principle and strong coupling expansion.

  1. A Contextualist Thanatology: A Pragmatic Approach to Death and Dying

    ERIC Educational Resources Information Center

    Reck, Andrew J.

    1977-01-01

    Denying the value of death but accepting its reality, the author points to dying, not death, as the problematic phenomenon with which a pragmatist thanatology must deal. It is suggested that dying contains opportunities for growth--for the dying as well as for their surviving friends and relatives. (Author)

  2. A Contingency Framework for Listening to the Dying

    ERIC Educational Resources Information Center

    Vora, Erika; Vora, Ariana

    2008-01-01

    Listening to the dying poses special challenges. This paper proposes a contingency framework for describing and assessing various circumstances when listening to the dying. It identifies current approaches to listening, applies the contingency framework toward effectively listening to the dying, and proposes a new type of listening called…

  3. Die and telescoping punch form convolutions in thin diaphragm

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Die and punch set forms convolutions in thin dished metal diaphragm without stretching the metal too thin at sharp curvatures. The die corresponds to the metal shape to be formed, and the punch consists of elements that progressively slide against one another under the restraint of a compressed-air cushion to mate with the die.

  4. 5 Ways to Cope When a Loved One Dies

    MedlinePlus

    ... Week of Healthy Breakfasts Shyness 5 Ways to Cope When a Loved One Dies KidsHealth > For Teens > 5 Ways to Cope When a Loved One Dies Print A A ... Here are 5 ideas that might help you cope when someone you love has died: Join in ...

  5. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  6. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  7. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  8. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  9. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  10. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  11. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  12. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  13. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  14. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  15. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  16. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  17. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  18. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  19. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  20. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  1. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  2. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  3. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  4. Differentiating suicide decedents who died using firearms from those who died using other methods.

    PubMed

    Anestis, Michael D; Khazem, Lauren R; Anestis, Joye C

    2017-02-22

    Studies have documented a link between gun ownership and suicide, but little is known about characteristics of those most likely to use a gun in a suicide attempt rather than alternative methods. We examined which factors differentiate suicide decedents who died using a gun from those who died by other methods. We further examined whether such findings are consistent within the subcomponent of our larger sample comprised entirely of gun owning suicide decedents. Data reflect 267 suicide decedents, with data provided by individuals who identified as having lost someone to suicide (loss survivors). Within the full sample, a higher proportion of gun-owning and male suicide decedents died by firearm. Further, individuals who had previously discussed suicide or engaged in one or more non-lethal suicide attempts were less likely to die by suicide using a gun. Within the subsample of gun owning suicide decedents, a greater proportion of decedents who stored guns at home and in unsecure locations died from self-inflected gunshot wounds. These findings add clarity to the relationship between firearm ownership and death by suicide at the individual level. Furthermore, these findings are consistent with the notion that means safety implementation may represent a vital suicide prevention tool.

  5. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Development of Surface Engineered Coating Systems for Aluminum Pressure Die Casting Dies: Towards a 'Smart' Die Coating

    SciTech Connect

    Dr. John J. Moore; Dr. Jianliang Lin,

    2012-07-31

    The main objective of this research program was to design and develop an optimal coating system that extends die life by minimizing premature die failure. In high-pressure aluminum die-casting, the die, core pins and inserts must withstand severe processing conditions. Many of the dies and tools in the industry are being coated to improve wear-resistance and decrease down-time for maintenance. However, thermal fatigue in metal itself can still be a major problem, especially since it often leads to catastrophic failure (i.e. die breakage) as opposed to a wear-based failure (parts begin to go out of tolerance). Tooling costs remain the largest portion of production costs for many of these parts, so the ability prevent catastrophic failures would be transformative for the manufacturing industry.The technology offers energy savings through reduced energy use in the die casting process from several factors, including increased life of the tools and dies, reuse of the dies and die components, reduction/elimination of lubricants, and reduced machine down time, and reduction of Al solder sticking on the die. The use of the optimized die coating system will also reduce environmental wastes and scrap parts. Current (2012) annual energy saving estimates, based on initial dissemination to the casting industry in 2010 and market penetration of 80% by 2020, is 3.1 trillion BTU's/year. The average annual estimate of CO2 reduction per year through 2020 is 0.63 Million Metric Tons of Carbon Equivalent (MM TCE).

  6. Accurate Die Design for Automotive Panel Stamping Considering the Compensation Related with Die Deflection and Blank Thinning

    NASA Astrophysics Data System (ADS)

    Chen, Jun; Xu, Dongkai; Xia, Guodong; Li, Xifeng; Chen, Jieshi; Zhang, Jian; Yan, Wei; Li, Yue

    2011-08-01

    In order to improve assembly accuracy, automotive body panels have to be fabricated with higher dimensional and surface quality requirements, therefore the die faces should be designed more accurately to consider more relevant factors. In the presented study, we proposed algorithms to realize the following functions: through forming process simulation, the thinning distribution on the deformed blank was extracted as first kind of compensation; through die structural CAE analysis which automatically mapped the boundary contact forces onto the die surfaces from process simulation results, the die deflection was calculated as second kind of compensation. These two quantitative contributions were added together to compensate the die face. The proposed methodologies were programmed and integrated with LS-Dyna and HyperWorks, and also integrated with Autoform and CATIA linear CAE functionalities separately. In addition, a software toolkit to calculate the contacting ratio was also developed to evaluate the effectiveness of die face compensation. The second toolkit developed was verified by an automotive structural part forming die design, through die compensation and geometric optimization, the predicted contact ratio between the die face and formed blank was improved a lot, and the first toolkit was testified by a fender drawing die design. It shows that the die face compensation can be realized and integrated seamlessly between CAD model, process simulation model and die structural CAE model with the help of data I/O tools developed by the authors.

  7. Thermal response in van der Waals heterostructures

    NASA Astrophysics Data System (ADS)

    Naidu Gandi, Appala; Alshareef, Husam N.; Schwingenschlögl, Udo

    2017-01-01

    We solve numerically the Boltzmann transport equations of the phonons and electrons to understand the thermoelectric response in heterostructures of M2CO2 (M: Ti, Zr, Hf) MXenes with transition metal dichalcogenide monolayers. Low frequency optical phonons are found to occur as a consequence of the van der Waals bonding, contribute significantly to the thermal transport, and compensate for the reduced contributions of the acoustic phonons (increased scattering cross-sections in heterostructures), such that the thermal conductivities turn out to be similar to those of the bare MXenes. Our results indicate that the important superlattice design approach of thermoelectrics (to reduce the thermal conductivity) may be effective for two-dimensional van der Waals materials when used in conjunction with intercalation.

  8. Thermal response in van der Waals heterostructures.

    PubMed

    Gandi, Appala Naidu; Alshareef, Husam N; Schwingenschlögl, Udo

    2017-01-25

    We solve numerically the Boltzmann transport equations of the phonons and electrons to understand the thermoelectric response in heterostructures of M2CO2 (M: Ti, Zr, Hf) MXenes with transition metal dichalcogenide monolayers. Low frequency optical phonons are found to occur as a consequence of the van der Waals bonding, contribute significantly to the thermal transport, and compensate for the reduced contributions of the acoustic phonons (increased scattering cross-sections in heterostructures), such that the thermal conductivities turn out to be similar to those of the bare MXenes. Our results indicate that the important superlattice design approach of thermoelectrics (to reduce the thermal conductivity) may be effective for two-dimensional van der Waals materials when used in conjunction with intercalation.

  9. Superlubricity using repulsive van der Waals forces.

    PubMed

    Feiler, Adam A; Bergström, Lennart; Rutland, Mark W

    2008-03-18

    Using colloid probe atomic force microscopy, we show that if repulsive van der Waals forces exist between two surfaces prior to their contact then friction is essentially precluded and supersliding is achieved. The friction measurements presented here are of the same order as the lowest ever recorded friction coefficients in liquid, though they are achieved by a completely different approach. A gold sphere attached to an AFM cantilever is forced to interact with a smooth Teflon surface (templated on mica). In cyclohexane, a repulsive van der Waals force is observed that diverges at short separations. The friction coefficient associated with this system is on the order of 0.0003. When the refractive index of the liquid is changed, the force can be tuned from repulsive to attractive and adhesive. The friction coefficient increases as the Hamaker constant becomes more positive and the divergent repulsive force, which prevents solid-solid contact, gets switched off.

  10. Method and apparatus for die forming metal sheets and extrusions

    NASA Astrophysics Data System (ADS)

    Darter, John L.

    1986-06-01

    The invention comprises an apparatus for die forming metal sheets and extrusions which utilizes die blocks of low melting temperature metallic material. The die blocks are formed in an adjustable mold which comprises a mold box, a pivotable dam within the mold box and blocking means for locking the pivotable dam member in a desired angular position. Once a desired die block angle is ascertained for a particular joggle, the pivotable member of the mold box is adjusted to produce the desired angle in the die casting made in the mold box.

  11. Sheet metal stamping die design for warm forming

    DOEpatents

    Ghosh, Amit K.

    2003-04-22

    In metal stamping dies, by taking advantage of improved material flow by selectively warming the die, flat sections of the die can contribute to the flow of material throughout the workpiece. Local surface heating can be accomplished by placing a heating block in the die. Distribution of heating at the flat lower train central regions outside of the bend region allows a softer flow at a lower stress to enable material flow into the thinner, higher strain areas at the bend/s. The heating block is inserted into the die and is powered by a power supply.

  12. Euthanasia, assisted dying and the right to die in Ghana: a socio-legal analysis.

    PubMed

    Owusu-Dapaa, Ernest

    2013-12-01

    There is unanimity among states to protect the continuation of life of the individual as a safeguard against their collective extinction. The right to life is accordingly guaranteed but its antithesis, the right to die is the subject of an unending debate. The controversy over the right to die is deepened by rapid advances in medicine, creating the capability for prolongation of life beyond the span which one's natural strength can endure. Ghana's supreme law explicitly guarantees the right to life but remains ambiguous on right to die, particularly euthanasia and assisted dying. Thus, some of the other rights, such as the right to dignity and not to be tortured, can creatively be exploited to justify some instances of euthanasia. Ghana's criminal code largely proscribes euthanasia. Notwithstanding, proscription of euthanasia and assisted dying by the law, in Ghana's empirical work undertaken in some of the communities in Ghana, suggests that euthanasia is quietly practisedin health facilities and private homes, especially in the rural areas. Contrary to the popular reasons assigned in the literature of the Western world, with respect to the practice or quest for legalization of euthanasia as being a necessity for providing relief from pain or hopeless quality of life, empirical data from social and anthropological studies conducted in Ghana reveal that poverty is the motivation for informal euthanasia practice in Ghana rather than genuine desire on part of patients to die or their relatives to see to their accelerated death. Apart from poverty, traditional cultural values of African societies consider non-natural death as a taboo and ignominy to the victim and his family. Thus, any move by the government to legalize euthanasia will need to be informed by widely held consultations and a possible referendum; otherwise the law may be just a mere transplant of Western models of legislation on euthanasia without reflecting the ethos of the African people.

  13. Dying cancer patients talk about euthanasia.

    PubMed

    Eliott, Jaklin A; Olver, Ian N

    2008-08-01

    Within developed nations, there is increasing public debate about and apparent endorsement of the appropriateness of euthanasia as an autonomous choice to die in the face of intolerable suffering. Surveys report socio-demographic differences in rates of acceptance of euthanasia, but there is little in-depth analysis of how euthanasia is understood and positioned within the social and moral lives of individuals, particularly those who might be considered suitable candidates-for example, terminally-ill cancer patients. During discussions with 28 such patients in Australia regarding medical decisions at the end of life, euthanasia was raised by 13 patients, with the others specifically asked about it. Twenty-four patients spoke positively of euthanasia, 19 of these voicing some concerns. None identified euthanasia as a currently favoured option. Four were completely against it. Endorsement for euthanasia was in the context of a hypothetical future or for a hypothetical other person, or temporally associated with acute pain. Arguments supporting euthanasia framed the issue as a matter of freedom of choice, as preserving dignity in death, and as curbing intolerable pain and suffering, both of the patient and of those around them. A common analogy featured was that of euthanising a dog. These arguments were typically presented as self-evident justification for euthanasia, construed as an appropriate choice to die, with opposers positioned as morally inferior or ignorant. The difficulties of ensuring 'choice' and the moral connotations of 'choosing to die,' however, worked to problematise the appropriateness of euthanising specific individuals. We recommend further empirical investigation of the moral and social meanings associated with euthanasia.

  14. Implementing California's Law on Assisted Dying.

    PubMed

    Mishra, Ruchika

    2017-03-01

    On October 5, 2015, Governor Jerry Brown approved bill ABX2 15, the End of Life Option Act, making California the fifth state in the country to allow physician-assisted dying. The law was modeled after Oregon's 1997 Death with Dignity Act. When the legislative special session ended on March 10, 2016, California health care providers had only ninety days to respond to the state mandate before the law would take effect, on June 9, 2016. Experience with the law so far suggests several challenges with implementation.

  15. Do imaginary companions die? An exploratory study.

    PubMed

    Kastenbaum, Robert; Fox, Lynn

    Adults in this exploratory study usually recalled that their childhood imaginary companions faded away or were dismissed as other options for social interaction became more appealing. However, eight participants reported that their IC had died. Analysis of these deaths offers a glimpse of the child's talent for transitional thought processes that navigate between the emerging constraints of logic and the continuing appeal of fantasy. It is suggested that young children are testing the limits and possibilities of what it means to be "real" at the same time they are trying to puzzle out "alive" and "dead."

  16. Die swell as an objective in the design of polymer extrusion dies

    NASA Astrophysics Data System (ADS)

    Siegbert, Roland; Behr, Marek; Elgeti, Stefanie

    2016-10-01

    This paper focuses on developing a suitable objective function for the inverse form of profile extrusion die design. First, the problem is motivated by introducing the extrusion die design process. After describing how Computer Aided Engineering enhances the traditional design process, a set of applicable objective functions is introduced. The main criteria for identifying the most suitable are computational applicability, robustness and smoothness of the functional. After discussing the results of several simulations, an objective function is proposed for the implementation in an existing optimization framework utilizing parameter-based optimization.

  17. Theory of coherent van der Waals matter.

    PubMed

    Kulić, Igor M; Kulić, Miodrag L

    2014-12-01

    We explain in depth the previously proposed theory of the coherent van der Waals (cvdW) interaction, the counterpart of van der Waals (vdW) force, emerging in spatially coherently fluctuating electromagnetic fields. We show that cvdW driven matter is dominated by many-body interactions, which are significantly stronger than those found in standard van der Waals (vdW) systems. Remarkably, the leading two- and three-body interactions are of the same order with respect to the distance (∝R(-6)), in contrast to the usually weak vdW three-body effects (∝R(-9)). From a microscopic theory we show that the anisotropic cvdW many-body interactions drive the formation of low-dimensional structures such as chains, membranes, and vesicles with very unusual, nonlocal properties. In particular, cvdW chains display a logarithmically growing stiffness with the chain length, while cvdW membranes have a bending modulus growing linearly with their size. We argue that the cvdW anisotropic many-body forces cause local cohesion but also a negative effective "surface tension." We conclude by deriving the equation of state for cvdW materials and propose experiments to test the theory, in particular the unusual three-body nature of cvdW.

  18. Theory of coherent van der Waals matter

    NASA Astrophysics Data System (ADS)

    Kulić, Igor M.; Kulić, Miodrag L.

    2014-12-01

    We explain in depth the previously proposed theory of the coherent van der Waals (cvdW) interaction, the counterpart of van der Waals (vdW) force, emerging in spatially coherently fluctuating electromagnetic fields. We show that cvdW driven matter is dominated by many-body interactions, which are significantly stronger than those found in standard van der Waals (vdW) systems. Remarkably, the leading two- and three-body interactions are of the same order with respect to the distance (∝R-6) , in contrast to the usually weak vdW three-body effects (∝R-9 ). From a microscopic theory we show that the anisotropic cvdW many-body interactions drive the formation of low-dimensional structures such as chains, membranes, and vesicles with very unusual, nonlocal properties. In particular, cvdW chains display a logarithmically growing stiffness with the chain length, while cvdW membranes have a bending modulus growing linearly with their size. We argue that the cvdW anisotropic many-body forces cause local cohesion but also a negative effective "surface tension." We conclude by deriving the equation of state for cvdW materials and propose experiments to test the theory, in particular the unusual three-body nature of cvdW.

  19. DIE Deflection Modeling: Empirical Validation and Tech Transfer

    SciTech Connect

    R. Allen Miller

    2003-05-28

    This report summarizes computer modeling work that was designed to help understand how the die casting die and machine contribute to parting plane separation during operation. Techniques developed in earlier research (8) were applied to complete a large computational experiment that systematically explored the relationship between the stiffness of the machine platens and key dimensional and structural variables (platen area covered, die thickness, platen thickness, thickness of insert and the location of the die with respect to the platen) describing the die/machine system. The results consistently show that there are many significant interactions among the variables and it is the interactions, more than the individual variables themselves, which determine the performance of the machine/die system. That said, the results consistently show that it is the stiffness of the machine platens that has the largest single impact on die separation.

  20. Die Sprache der Hande zu den Handen sprechen (Talking the Language of the Hands to the Hands). DB-LINK.

    ERIC Educational Resources Information Center

    Miles, Barbara

    This paper examines the importance of hands for the person who is deafblind, reviews hand development, and identifies specific teaching skills that facilitate hand development and expressiveness in persons who are deafblind. It notes that the hands of a deafblind individual serve not only as tools but also as sense organs (to compensate for their…

  1. Bedeutung kleinräumiger Daten für die Evaluation von Bildungsprojekten. Das Beispiel der Junior Uni Wuppertal

    NASA Astrophysics Data System (ADS)

    Makles, Anna

    2016-12-01

    The Junior University, a University for children and youth in the city of Wuppertal, offers science courses that target children and youth from all socioeconomic backgrounds. The first evaluation study done by the University of Wuppertal in 2013 aimed at examining whether the Junior University has achieved this goal. The main challenge of our analysis was to approximate missing individual information on socioeconomic status by using spatial data. Therefore, we georeferenced address information of the Junior University students and linked those results to different characteristics available for about 2800 city blocks in the city of Wuppertal. We found out that indeed the Junior University succeeds in attracting children and youth from all socioeconomic backgrounds. The results show that many of the students live in poor neighborhoods or in neighborhoods with a high share of immigrants.

  2. Der unberechenbare Kunde. Wie paradoxes Einkaufsverhalten unsere Konsumlandschaft verändert und die Standortentwicklung darauf reagieren kann

    NASA Astrophysics Data System (ADS)

    David, Thomas; Hilpert, Markus

    2016-09-01

    This article summarizes the evolution of consumption in Germany in the last decades with special focus on the intricacy of demand. The authors discuss some established approaches of marketing and compare it with the actual impact of basic meta trends. Further, the impact of consumption on establish retail locations and new areas to supply is discussed.

  3. Die-target for dynamic powder consolidation

    DOEpatents

    Flinn, J.E.; Korth, G.E.

    1985-06-27

    A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block. 4 figs.

  4. Die-target for dynamic powder consolidation

    DOEpatents

    Flinn, John E.; Korth, Gary E.

    1986-01-01

    A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block.

  5. The dying child and surviving family members.

    PubMed

    Shrier, D K

    1980-12-01

    This overview of death and dying focuses on the dying child and surviving family members. Children's concepts of death at different developmental stages are reviewed. These range from an inability to distinguish death from other forms of separation prior to age 3, through partial concepts of death until, by age 10 to 15 years, children are able to conceptualize death as universal, inevitable and final. The importance of adults assisting in the child's growing comprehension of death is stressed. The stages of grief and mourning, as outlined by Kubler-Ross, are reviewed from the perspective of the child and family: denial, anger, bargaining, depression and acceptance. Recognition is given to the variations in coping styles among different family members. The special circumstances related to the death of an infant and the impact of the death of a child on the surviving siblings are discussed. Specific helpful interventions to assist families in coping with mourning are described. The death of a child remains one of the most painful and difficult events for a family and its physician to accept.

  6. Dying or living?: The double bind.

    PubMed

    Longhofer, J

    1980-06-01

    Describing the behaviors of terminally ill patients, their families and those charged with their care has received considerable attention during the past decade. This study of comprehensive cancer treatment and research facility indicates that the prevailing theory is limited to explanation at the intra-psychic level. In her work with hundreds of terminal cases, Dr. Elizabeth Kubler-Ross found that patients typically progress through five stages: 1) denial, 2) anger, 3) bargaining, 4) depression, and 5) acceptance. She concludes that the majority of her patients die in a stage of acceptance--a state of equanimity. Recently, scholars have claimed that this five stage scheme has limited applicability and may in fact contribute to the formalization of a dying person's behavior. This preliminary report proposes that the stage theory, if it has any descriptive validity, becomes meaningful only when used to describe behaviors occurring among patients, families, and medical practitioners. A plausible explanation of these behaviors is accomplished by examination of communication patterns containing the structure of paradox or double bind. Patients are forced to perceive realities about their physical conditions not as they appear to them, but as they are defined by those in their environment. This paper explores these communication patterns in relation to the structure of social relationships and the specific contents of messages being transmitted and received.

  7. [The debate about the right to die].

    PubMed

    Beca, Juan Pablo; Ortiz, Armando; Solar, Sebastián

    2005-05-01

    The Right to Die is a debatable issue and some basic notions need to be clarified to discuss it. Death needs to be recognized as part of human life. The goal of medicine is to avoid pain and alleviate suffering, to prevent premature death and when this is not possible, to let it occur peacefully. The concept of euthanasia is unclear, which increases the confusion on end-of-life topics. The term euthanasia should be used only when referring to medical acts performed to produce the patient's death, with the intention of terminating his/her suffering. It is what is usually called "active" euthanasia, which can be voluntary or involuntary. It is essential to understand the difference between producing and allowing death. This will permit timely decisions about limiting or withdrawing treatments, that can be disproportionate or that are only prolonging suffering. Limiting treatments does not mean to abandon the patient but rather to redefine his needs, such as pain treatment, prevention of complications, and relief of suffering. The ethic rationale for these decisions is the respect to the dignity of human life, and the estimation of proportionality or futility of each treatment. The physician's duty with the patient at the end of his life is to assist him in dying according to his values and to minimize his distress.

  8. Die casting die deflections: Prediction and attenuation. Final report, July 1, 1995--September 30, 1997

    SciTech Connect

    Miller, R.Allen; Ahuett-Garza, Horacio; Choudhury, Aswin K.; Dedhia, Sanjay

    1998-05-01

    The objective of this work was to develop and test die casting design evaluation techniques based on the visualization of geometric data that is related to potential defects or problems. Specifically, thickness information is used to provide insight into potential thermal problems in the part and die. Distance from the gate and a special type of animation of the fill pattern is used to provide an assessment of gate, vent and overflow locations. Techniques have been developed to convert part design information in the form of STL files to a volume-based representation called a voxel model. The use of STL files makes the process CAD system independent. Once in voxel form, methods that were developed in this work are used to identify thick regions in the part, thin regions in the part and/or die, distance from user specified entry locations (gates), and the qualitative depiction of the fill pattern. The methods were tested with a prototype implementation on the UNIX platform. The results of comparisons with numerical simulation and field reported defects were surprisingly good. The fill-related methods were also compared against short-shots and a water analog study using high speed video. The report contains the results of the testing plus detailed background material on the construction of voxel models, the methods used for displaying results, and the computational geometric reasoning methods used to create die casting-related information from the voxel model for display to the user.

  9. [From absolute necessity of dying to preventive planning of dying? The change of social and medicine debates on dying in the 1980s].

    PubMed

    Jordan, I

    2010-04-01

    International euthanasia debates focussing on "autonomous dying" in the 1980s corresponded with a general change in the health-care system: availability of new technical means with an analogous medical-ethic understanding of human suffering and dying. This change is part of a general development from "passive health consumption" to "active prevention" in our society.

  10. The dying role: its relevance to improved patient care.

    PubMed

    Noyes, R; Clancy, J

    1977-02-01

    Society is failing to meet the obligation it has to its dying members. Persons with terminal illnesses suffer isolation and neglect in hospitals, receive overzealous treatment by physicians, and are kept in ignorance of their situation by families and medical personnel. Evidence for these statements has come from observers of the medical care system and from dying patients themselves (Kübler-Ross, 1969; Reynolds and Kalish, 1974; Sudnow, 1967); In the nineteenth century it was common for persons to die in the familiar environs of their homes, surrounded by grieving families from whom they parted in a meaningful manner (Blauner, 1966). Dying persons of today no longer fill a well-defined social role. Instead, the distinction between the roles of sick and dying persons has been lost and, in the resulting confusion, the care of dying people has suffered. The purpose of this article is to clarify the distinction between the dying and sick roles, identify the signs of existing role confusion, suggest ways in which this confusion may be corrected, and show how reestablishment of the dying role can result in improved care of dying people. The important part physicians play in defining sick and dying roles will be emphasized.

  11. The Dying Role: Its Relevance to Improved Patient Care.

    PubMed

    Noyes, Russell; Clancy, John

    2016-01-01

    SOCIETY is failing to meet the obligation it has to its dying members. Persons with terminal illnesses suffer isolation and neglect in hospitals, receive overzealous treatment by physicians, and are kept in ignorance of their situation by families and medical personnel. Evidence for these statements has come from observers of the medical care system and from dying patients themselves (Kübler-Ross, 1969; Reynolds and Kalish, 1974; Sudnow, 1967). In the nineteenth century it was common for persons to die in the familiar environs of their homes, surrounded by grieving families from whom they parted in a meaningful manner (Blauner, 1966). Dying persons of today no longer fill a well-defined social role. Instead, the distinction between the roles of sick and dying persons has been lost and, in the resulting confusion, the care of dying people has suffered. The purpose of this article is to clarify the distinction between the dying and sick roles, identify the signs of existing role confusion, suggest ways in which this confusion may be corrected, and show how reestablishment of the dying role can result in improved care of dying people. The important part physicians play in defining sick and dying roles will be emphasized.

  12. Devices and applications of van der Waals heterostructures

    NASA Astrophysics Data System (ADS)

    Li, Chao; Zhou, Peng; Zhang, David Wei

    2017-03-01

    Van der Waals heterostructures, composed of individual two-dimensional material have been developing extremely fast. Synthesis of van der Waals heterostructures without the constraint of lattice matching and processing compatibility provides an ideal platform for fundamental research and new device exploitation. We review the approach of synthesis of van der Waals heterostructures, discuss the property of heterostructures and thoroughly illustrate the functional van der Waals heterostructures used in novel electronic and photoelectronic device. Project supported by the National Key Research and Development Program (No. 2016YFA0203900) and the National Natural Science Foundation of China (Nos. 61376093, 61622401).

  13. National Metal Casting Research Institute final report. Volume 2, Die casting research

    SciTech Connect

    Jensen, D.

    1994-06-01

    Four subprojects were completed: development and evaluation of die coatings, accelerated die life characterization of die materials, evaluation of fluid flow and solidification modeling programs, selection and characterization of Al-based die casting alloys, and influence of die materials and coatings on die casting quality.

  14. CMAC with General Basis Functions.

    PubMed

    Chun-Shin, Lin; Ching-Tsan, Chiang

    1996-10-01

    The cerebellar model articulation controller (CMAC) is often used in learning control. It can be viewed as a basis function network (BFN). The conventional CMAC uses local constant basis functions. A disadvantage is that its output is constant within each quantized state and the derivative information is not preserved. If the constant basis functions are replaced by non-constant differentiable basis functions, the derivative information will be able to be stored into the structure as well. In this paper, the generalized scheme that uses general basis functions is investigated. The conventional CMAC is a special case of the generalized technique. The mathematical foundation for the modified scheme is derived and the convergence of learning is proved. Simulations for the CMAC with Gaussian basis functions (GBFs) are performed to demonstrate the improvement of accuracy in modeling, and the capability in providing derivative information. Copyright 1996 Elsevier Science Ltd

  15. Necroptosis: A new way of dying?

    PubMed

    Hanson, Britt

    2016-09-01

    This review embarks upon a cell death journey from the discovery of apoptosis and necrosis through to the coalescence of these: necroptosis. The mechanisms of 2 emerging necrotic cell death pathways, pyroptosis and ferroptosis, will be explored before delving into apoptotic and necroptotic signaling cascades, highlighting the complex interplay between molecular players. The involvement of the ripoptosome, interferon signaling and DNA damage in necroptosis will be discussed briefly. The major focus is on necroptosis initiation by tumor necrosis factor-α (TNFα) and its cognate receptor TNFR1, caspase-independent RIP1/RIP3/MLKL necrosome activation and cell death propagation by damage-associated molecular pattern (DAMP) release. Finally, the implications of a complex cell death signaling network will be revealed in the context of cancer biology and therapy. The clinical contribution of the discovery of necroptosis as an unequivocally new way of dying is monumental and could drastically alter cancer therapy strategies in the future.

  16. HIV transcription is induced in dying cells

    SciTech Connect

    Woloschak, G.E.; Chang-Liu, Chin-Mei; Schreck, S. |; Panozzo, J.; Libertin, C.R.

    1996-02-01

    Using HeLa cells stably transfected with an HIV-LTR-CAT construct, we demonstrated a peak in CAT induction that occurs in viable (but not necessarily cell-division-competent) cells 24 h following exposure to some cell-killing agents. {gamma} rays were the only cell-killing agent which did not induce HIV transcription; this can be attributed to the fact that {gamma}-ray-induced apoptotic death requires functional p53, which is not present in HeLa cells. For all other agents, HIV-LTR induction was dose-dependent and correlated with the amount of cell killing that occurred in the culture. Doses which caused over 99% cell killing induced HIV-LTR transcription maximally, demonstrating that cells that will go on to die by 14 days are the cells expressing HIV-LTR-CAT.

  17. Autonomy, rationality and the wish to die.

    PubMed Central

    Clarke, D M

    1999-01-01

    Although suicide has traditionally carried a negative sanction in Western societies, this is now being challenged, and while there remains substantial public concern surrounding youth and elder suicide, there is a paradoxical push to relax the prohibition under certain circumstances. Central to the arguments behind this are the principles of respect for autonomy and the importance of rationality. It is argued here that the concepts of rationality and autonomy, while valuable, are not strong enough to substantiate a categorical "right to suicide" and that the concepts of "understandability" and "respect" are more useful and able to provide the foundation for responding to a person expressing a wish to die. Roman suicide, sometimes held as an example of "rational suicide", illustrates the effects of culture, tradition and values on the attitudes to, and the practice of, suicide. PMID:10635498

  18. Paradoxical contributions of EEG during protracted dying.

    PubMed

    Spudis, E V; Penry, J K; Link, A S

    1984-02-01

    Estimates of the potential for recovery from severe brain damage have become more accurate as EEG and imaging techniques evolve. When all modern electrical criteria for brain death are satisfied, useful recovery is probably impossible. Many patients who have no reasonable chance of returning to a cognitive, sapient, or useful state may be nurtured throughout a prolonged final illness primarily because of brain waves that fluctuate in the 2- to 5-microV range. The incidence of such protracted dying is unknown. We illustrate diffuse low-amplitude wave forms and regional fragments recorded from a 27-year-old woman maintained on a respirator for six months after loss of brain-stem reflexes. Considering the limited noise-signal ratio of modern equipment, popular EEG criteria for death may be prematurely rigid, prolonging death in tragic circumstances.

  19. Death and dying anxiety among bereaved and nonbereaved elderly parents.

    PubMed

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Tinsky-Roimi, Tal

    2011-08-01

    This study examines differences in death and dying anxiety between bereaved and nonbereaved elderly Israeli parents, as well as correlates of these factors among bereaved parents. A total of 97 parents (49 bereaved, 48 nonbereaved) completed measures of death and dying anxiety and religiosity. Bereaved parents reported significantly higher dying anxiety scores than nonbereaved parents, but there were no significant differences between the 2 groups in death anxiety. Religiosity was unrelated to death and dying anxiety. Dying anxiety was higher among bereaved mothers than bereaved fathers. Death and dying anxiety were not associated with the length of time since the loss of the child or the nature of the child's death. Results are discussed in light of the difficulties that bereaved parents experience after the loss of their child. Implications for theory, for health and welfare professionals, and for policy are suggested.

  20. Clinical Criteria for Physician Aid in Dying

    PubMed Central

    Pope, Thaddeus Mason; Rich, Ben A.

    2016-01-01

    Abstract More than 20 years ago, even before voters in Oregon had enacted the first aid in dying (AID) statute in the United States, Timothy Quill and colleagues proposed clinical criteria AID. Their proposal was carefully considered and temperate, but there were little data on the practice of AID at the time. (With AID, a physician writes a prescription for life-ending medication for a terminally ill, mentally capacitated adult.) With the passage of time, a substantial body of data on AID has developed from the states of Oregon and Washington. For more than 17 years, physicians in Oregon have been authorized to provide a prescription for AID. Accordingly, we have updated the clinical criteria of Quill, et al., based on the many years of experience with AID. With more jurisdictions authorizing AID, it is critical that physicians can turn to reliable clinical criteria. As with any medical practice, AID must be provided in a safe and effective manner. Physicians need to know (1) how to respond to a patient's inquiry about AID, (2) how to assess patient decision making capacity, and (3) how to address a range of other issues that may arise. To ensure that physicians have the guidance they need, Compassion & Choices convened the Physician Aid-in-Dying Clinical Criteria Committee, in July 2012, to create clinical criteria for physicians who are willing to provide AID to patients who request it. The committee includes experts in medicine, law, bioethics, hospice, nursing, social work, and pharmacy. Using an iterative consensus process, the Committee drafted the criteria over a one-year period. PMID:26539979

  1. van der Waals Heterostructures Grown by MBE

    NASA Astrophysics Data System (ADS)

    Hinkle, Christopher

    In this work, we demonstrate the high-quality MBE heterostructure growth of various layered 2D materials by van der Waals epitaxy (VDWE). The coupling of different types of van der Waals materials including transition metal dichalcogenide thin films (e.g., WSe2, WTe2, HfSe2) , insulating hexagonal boron nitride (h-BN), and topological insulators (e.g., Bi2Se3) allows for the fabrication of novel electronic devices that take advantage of unique quantum confinement and spin-based characteristics. The relaxed lattice-matching criteria of van der Waals epitaxy has allowed for high-quality heterostructure growth with atomically abrupt interfaces, allowing us to couple these materials based primarily on their band alignment and electronic properties. We will discuss the impact of sample preparation, surface reactivity, and lattice mismatch of various substrates (sapphire, graphene, TMDs, Bi2Se3) on the growth mode and quality of the films and will discuss our studies of substrate temperature and flux rates on the resultant growth and grain size. Structural and chemical characterization was conducted via reflection high energy electron diffraction (RHEED, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning tunneling microscopy/spectroscopy (STM/S), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. Experimentally determined band alignments have been determined and compared with first-principles calculations allowing the design of novel low-power logic and magnetic memory devices. Initial results from the electrical characterization of these grown thin films and some simple devices will also be presented. These VDWE grown layered 2D materials show significant potential for fabricating novel heterostructures with tunable band alignments and magnetic properties for a variety of nanoelectronic and optoelectronic applications.

  2. HUBBLE SURVEYS DYING STARS IN NEARBY GALAXY

    NASA Technical Reports Server (NTRS)

    2002-01-01

    From ground-based telescopes, the glowing gaseous debris surrounding dying, sun-like stars in a nearby galaxy, called the Large Magellanic Cloud, appear as small, shapeless dots of light. But through the 'eyes' of NASA's Hubble Space Telescope, these bright dots take on a variety of shapes, from round- to pinwheel-shaped clouds of gas. Using Hubble's Space Telescope Imaging Spectrograph, scientists probed the glowing gas surrounding 27 dying stars, called planetary nebulae, in the Large Magellanic Cloud. The observations represent the most detailed study of planetary nebulae outside the Milky Way. The six objects in the picture illustrate the assortment of planetary nebulae identified in the galaxy. SMP 16, 30, and 93 are examples of a bipolar nebula, twin lobes of gas projecting away from a dying star. SMP 10 has a pinwheel shape and is known as a 'point-symmetric' nebula. SMP 4 has an elliptical appearance, and SMP 27, consisting of four lobes of gas, is called a 'quadrupolar' nebula. The lines point to the objects' locations in the Large Magellanic Cloud. A ground-based observatory snapped the picture of this galaxy. In the pictures of the planetary nebulae, color corresponds to temperature. Blue represents hotter regions of the nebulae and red, cooler. Scientists are probing these illuminated stellar relics in our neighboring galaxy because they are at relatively the same distance - about 168,000 light-years -- from Earth. Knowing the distance to these objects allows scientists to compare their shapes and sizes, and precisely determine the brightness of their central stars. For this reason, even though these glowing remains of dying stars are about 50 times farther away than the stunning planetary nebulae photographed in the Milky Way, they are of invaluable importance. By sampling this population, scientists noticed that the bipolar nebulae are richer in some heavier elements, such as neon, than those with a more spherical shape. At the dawn of the universe

  3. Thermal Hotspots in CPU Die and It's Future Architecture

    NASA Astrophysics Data System (ADS)

    Wang, Jian; Hu, Fu-Yuan

    Owing to the increasing core frequency and chip integration and the limited die dimension, the power densities in CPU chip have been increasing fastly. The high temperature on chip resulted by power densities threats the processor's performance and chip's reliability. This paper analyzed the thermal hotspots in die and their properties. A new architecture of function units in die - - hot units distributed architecture is suggested to cope with the problems of high power densities for future processor chip.

  4. BOOK REVIEW: Meilensteine der Astronomie - Von Aristoteles bis Hawking

    NASA Astrophysics Data System (ADS)

    Duerbeck, H. W.; Hamel, J.

    2006-12-01

    neglected, other astronomers? Before the chapter dealing with Aristoteles and other Greek thinkers, the author presents a very good introduction to prehistoric astronomy. Subsequent chapters cover medieval times (Sacrobosco), Copernicus, instruments (Apian), calendars and their makers, telescopes and theological conflicts, women in astronomy and celestial mechanics, "amateur" astronomers (Herschel and Bessel), philosophy and science (Kant and successors). "At the limits of knowledge" is the title of the last, somewhat scanty chapter on 20th century astronomy. The only confusing text is found on p. 43: Die exzentrische Lage der Spharen wurde von Hipparch im 2. Jahrhundert v. Chr. eingefuhrt. Cum grano salis, this is correct; Hipparchos assumed an eccentric orbit for the Sun. Furthermore, die Erde steht im Mittelpunkt des Deferenten, jedoch um den Betrag der Exzentrizitat E vom Mittelpunkt des Exzenters entfernt. A figure showing a deferent circle (and attached epicycle) with center M, and a lower point E called center of world = center of Earth in the caption, tries to illustrate this. The desperate reader does not find the eccenter in the figure, and also does not appreciate why the Earth is in the center of the deferent M when the caption says it is in E. The explanation is that for a planet, having two anomalies, the epicycle does not run on a concentric circle, usually called deferent, but on an eccenter. Thus, in the figure, the circle labelled deferent is the eccenter. In Cellarius' Harmonia Macrocosmica, Table 14, a similar figure explains it all: Eccentricus deferens epicyclum - the eccenter that carries around the epicycle. Since we have switched to Latin, we should mention that on p. 158, we encountered the sentence "in dubia pro res". Perhaps we are permitted to reply "si tacuisses, philosophus mansisses". The reader is cautioned: if this book is used as a road atlas for the history of astronomy, the reader will often find very rough sketches of the progress of

  5. Amor und der Abstand zur Sonne. Geschichten aus meinem Kosmos

    NASA Astrophysics Data System (ADS)

    Kippenhahn, Rudolf

    2001-10-01

    R. Kippenhahn hat in vielen Büchern die Astronomie populär gemacht. Ihn interessieren dabei immer auch die kuriosen Aspekte seiner Wissenschaft. Von ihnen erzählt er in den kleinen Geschichten dieses Buches.

  6. The pathological basis for skeletal scintigraphy.

    PubMed

    Galasko, C S

    1975-08-01

    Skeletal scintigraphy, which has now been established as a useful and accurate method of detecting early skeletal metastases and assessing their response to treatment, has been investigated for its pathological basis. Histological examination of several hyndred necropsy specimens, from sixty-eight patients who died from malignant disease, showed a significant increase of osteoid and immature woven bone in the presence of metastatic cancer. Tumour-cell suspensions of the VX2 carcinoma were injected into the medullary cavity or on to the periosteal surface of the ilia or tibiae of New Zealand white rabbits. A combination of bone destruction and new bone formation, similar to the autopsy material, was seen. There were at least two mechanisms for the new bone production. Initially, intramembranous ossification was seen in the fibrous stroma surrounding the tumour. Once the cortex was involved and cortical bone destruction had occurred, large amounts of woven bone resembling fracture callus were laid down. The new bone had a markedly increased avidity for bone-seeking isotopes, indicating why skeletal scintigraphy was useful. A further twenty rabbits, in whose ilia the VX2 carcinoma was growing, were treated by local irradiation. When treatment was successful the tumour was destroyed, the production of new bone ceased, and the lesion lost its increased avidity for bone-seeking isotopes, indicating that skeletal scintigraphy could be used to assess the response of skeletal metastases to therapy.

  7. L-connect routing of die surface pads to the die edge for stacking in a 3D array

    DOEpatents

    Petersen, Robert W.

    2000-01-01

    Integrated circuit chips and method of routing the interface pads from the face of the chip or die to one or more sidewall surfaces of the die. The interconnection is routed from the face of the die to one or more edges of the die, then routed over the edge of the die and onto the side surface. A new pad is then formed on the sidewall surface, which allows multiple die or chips to be stacked in a three-dimensional array, while enabling follow-on signal routing from the sidewall pads. The routing of the interconnects and formation of the sidewall pads can be carried out in an L-connect or L-shaped routing configuration, using a metalization process such as laser pantography.

  8. "Dying is dying, that's all": Structural violence and cultural projects in Malawian AIDS proverbs.

    PubMed

    Hayes, Nicole C

    2015-01-01

    This paper examines three Malawian proverbs about AIDS: "AIDS came for people", "Dying is dying, that's all" and "It's in the flour". Proverbs permit Malawians to discuss the otherwise taboo topic of AIDS because they offer a special register and perform a footing shift, a rhetorical manoeuvre that allows the speaker to attribute problematic speech to someone else. The proverbs under consideration convey a sense of powerless in the face of the AIDS epidemic, which is an indicator of the effects of structural violence on the everyday lives of most Malawians. Despite the aura of timeless tradition generally conveyed by proverbs, the author argues that individual Malawians are actually using AIDS proverbs to align themselves with the pursuit of gendered cultural projects, such as multiple concurrent partner sex and transactional sex, which are not traditional at all.

  9. Crystal Structures of Mite Allergens Der f 1 and Der p 1 Reveal Differences in Surface-Exposed Residues that May Influence Antibody Binding

    SciTech Connect

    Chruszcz, Maksymilian; Chapman, Martin D.; Vailes, Lisa D.; Stura, Enrico A.; Saint-Remy, Jean-Marie; Minor, Wladek; Pomés, Anna

    2009-12-01

    The Group 1 mite allergens, Der f 1 and Der p 1, are potent allergens excreted by Dermatophagoides farinae and Dermatophagoides pteronyssinus, respectively. The human IgE antibody responses to the Group 1 allergens show more cross-reactivity than the murine IgG antibody responses which are largely species-specific. Here, we report the crystal structure of the mature form of Der f 1, which was isolated from its natural source, and a new, high-resolution structure of mature recombinant Der p 1. Unlike Der p 1, Der f 1 is monomeric both in the crystalline state and in solution. Moreover, no metal binding is observed in the structure of Der f 1, despite the fact that all amino acids involved in Ca{sup 2+} binding in Der p 1 are completely conserved in Der f 1. Although Der p 1 and Der f 1 share extensive sequence identity, comparison of the crystal structures of both allergens revealed structural features which could explain the differences in murine and human IgE antibody responses to these allergens. There are structural differences between Der f 1 and Der p 1 which are unevenly distributed on the allergens' surfaces. This uneven spatial arrangement of conserved versus altered residues could explain both the specificity and cross-reactivity of antibodies against Der f 1 and Der p 1.

  10. Remote thermal neutron die-away measurements to improve Differential Die-Away Analysis

    NASA Astrophysics Data System (ADS)

    Jordan, Kelly A.; Vujic, Jasmina; Gozani, Tsahi

    2007-08-01

    Differential Die-away Analysis (DDAA) is a very effective detection technique of special nuclear material (SNM). It is based on the detection of fast fission neutrons that decay with a time constant characteristic of the thermal neutron that created them. The presence of fast neutrons with this slow die-away time is a positive, sensitive indication of the presence of SNM in the inspected cargo. The thermal decay time of an inspected medium is not known before a DDAA measurement is taken. The choice of when, from the end of a neutron pulse, data are to be acquired must be taken conservatively. If the thermal decay time of an inspected medium can be determined, a priori, then a better estimate of the expected time of separation between the intrinsic detector signal and the fission signal can be achieved. With a better estimate of this time, the choice of times after the end of the pulse to perform signal integration can be optimized. A more optimal choice for this time will result in higher detection sensitivity. This paper describes a method of remotely assessing the thermal die-away properties of an interrogated cargo, and grossly characterizes the class of material being inspected in terms of neutron attenuation and moderation properties.

  11. Diagnose

    NASA Astrophysics Data System (ADS)

    Schauer, Wolfgang

    Die Zunahme der Elektronik im Kraftfahrzeug, die Nutzung von Software zur Steuerung des Fahrzeugs und die erhöhte Komplexität moderner Einspritzsysteme stellen hohe Anforderungen an das Diagnosekonzept, die Überwachung im Fahrbetrieb (On-Board-Diagnose) und die Werkstattdiagnose (Bild 1). Basis der Werkstattdiagnose ist die geführte Fehlersuche, die verschiedene Möglichkeiten von Onboard- und Offboard-Prüfmethoden und Prüfgeräten verknüpft. Im Zuge der Verschärfung der Abgasgesetzgebung und der Forderung nach laufender Überwachung hat auch der Gesetzgeber die On-Board-Diagnose als Hilfsmittel zur Abgasüberwachung erkannt und eine herstellerunabhängige Standardisierung geschaffen. Dieses zusätzlich installierte System wird OBD-System (On Board Diagnostic System) genannt.

  12. Scaling laws for van der Waals interactions in nanostructured materials.

    PubMed

    Gobre, Vivekanand V; Tkatchenko, Alexandre

    2013-01-01

    Van der Waals interactions have a fundamental role in biology, physics and chemistry, in particular in the self-assembly and the ensuing function of nanostructured materials. Here we utilize an efficient microscopic method to demonstrate that van der Waals interactions in nanomaterials act at distances greater than typically assumed, and can be characterized by different scaling laws depending on the dimensionality and size of the system. Specifically, we study the behaviour of van der Waals interactions in single-layer and multilayer graphene, fullerenes of varying size, single-wall carbon nanotubes and graphene nanoribbons. As a function of nanostructure size, the van der Waals coefficients follow unusual trends for all of the considered systems, and deviate significantly from the conventionally employed pairwise-additive picture. We propose that the peculiar van der Waals interactions in nanostructured materials could be exploited to control their self-assembly.

  13. Positionsbestimmung des Unternehmens: Interne und externe Analyse

    NASA Astrophysics Data System (ADS)

    Bergmann, Lars; Crespo, Isabel; Portmann, Stefan

    Die Initiierung und Lenkung von Maßnahmen zur integrierten Modernisierung zielen auf die Verbesserung der Wettbewerbsfähigkeit eines Unternehmens ab. Damit diese Maßnahmen zielgerichtet die Wettbewerbsfähigkeit verbessern können, ist Wissen über die bestehende Wettbewerbsfähigkeit sowie über die bestehenden Fähigkeiten eine zentrale Voraussetzung. Eine zielgerichtete Auswahl problemadäquater Maßnahmen zur Verbesserung der Wettbewerbsfähigkeit bedarf daher im Vorfeld einer Bewertung der aktuellen Situation des Unternehmens im Sinne einer Positionsbestimmung. Erst wenn die internen Stärken und Schwächen sowie die externen Chancen und Risiken identifiziert sind, kann ein ganzheitliches Bild von der Position eines Unternehmens in seiner Umwelt gewonnen werden. Auf Basis der Kenntnisse über die Position des Unternehmens können anschließend zielgerichtet Maßnahmen ausgewählt werden, die einen Beitrag zur Verbesserung der Wettbewerbsfähigkeit des Unternehmens haben. Damit kommt der Positionsbestimmung als initialer Schritt des Prozesses der strategischen Unternehmensplanung eine zentrale Bedeutung im Rahmen der integrierten Modernisierung zu. Erfolgt die Auswahl von Maßnahmen ohne eine vorherige Positionsbestimmung, also lediglich auf Basis drängender Probleme, so besteht die Gefahr einer unbedachten und nur auf das "hier und heute“ bezogenen Schwerpunktbildung ohne Berücksichtigung der mittel- und langfristigen Ziele des Unternehmens.

  14. [Analysis of public quality reports for home care and long-term care with respect to their usefulness for the customer].

    PubMed

    Sünderkamp, Susanne; Weiß, Christian; Rothgang, Heinz

    2014-10-01

    Hintergrund: Seit dem Pflege-Weiterentwicklungsgesetz von 2008 und der Entwicklung der Pflegetransparenzvereinbarungen sollen Verbraucher die Möglichkeit erhalten, auf Basis einer flächendeckenden Qualitätsbeurteilung von ambulanten Pflegediensten und stationären Pflegeeinrichtungen eine informierte Wahl ihres Pflegeanbieters vorzunehmen. Ziel: Diese Studie prüft die Pflegenoten auf Basis einer empirischen Analyse der veröffentlichten MDK-Qualitätsberichte von 11 884 ambulanten Pflegediensten und 10 310 Pflegeheimen, was einer erstmaligen Vollerhebung aller bundesdeutschen Pflegeanbieter gleichkommt. Methoden: Auswertungen der deskriptiven Statistik und Diskussion der Ergebnisse in Hinblick auf die Nützlichkeit der Noten für den Verbraucher. Ergebnisse: Die Auswertungen zeigen eine begrenzte Aussagekraft der Pflegenoten für den Verbraucher. Ursächlich dafür sind insbesondere die durchschnittlich sehr guten Noten bei geringer Streuung und die großen Lücken in der Bewertung der einzelnen Kriterien, vor allem im ambulanten Bereich. Sie verstärken den Einfluss pflegeferner Kriterien auf die Gesamtnote und begünstigen den Ausgleich von Pflegemängeln durch guten Service. Dies kommt aber sehr selten vor. Eine stärkere Bewertung von Risikokriterien würde die Aussagekraft derzeit kaum erhöhen. Schlussfolgerungen: Die Konzeption der Pflegenoten bedarf einer gründlichen Optimierung, um die Nützlichkeit für den Verbraucher zu erhöhen.

  15. Regional ontogeny of New England salt marsh die-off.

    PubMed

    Coverdale, Tyler C; Bertness, Mark D; Altieri, Andrew H

    2013-10-01

    Coastal areas are among the world's most productive and highly affected ecosystems. Centuries of human activity on coastlines have led to overexploitation of marine predators, which in turn has led to cascading ecosystem-level effects. Human effects and approaches to mediating them, however, differ regionally due to gradients in biotic and abiotic factors. Salt marsh die-off on Cape Cod, Massachusetts (U.S.A.), triggered by a recreational-fishing-induced trophic cascade that has released herbivorous crabs from predator control, has been ongoing since 1976. Similar salt marsh die-offs have been reported in Long Island Sound and Narragansett Bay (U.S.A.), but the driving mechanism of these die-offs has not been examined. We used field experiments to assess trophic interactions and historical reconstructions of 24 New England marshes to test the hypotheses that recreational fishing and predator depletion are a regional trigger of salt marsh die-off in New England and that die-offs in Long Island Sound and Narragansett Bay are more recent than those on Cape Cod. Predator depletion was the general trigger of marsh die-off and explained differences in herbivorous crab abundance and the severity of die-off across regions. Die-offs in Long Island Sound and Narragansett Bay are following a trajectory similar to die-off on Cape Cod, but are approximately 20 years behind those on Cape Cod. As a result, die-off currently affects 31.2% (SE 2.2) of low-marsh areas in Long Island Sound and Narragansett Bay, less than half the severity of die-off on Cape Cod. Our results contribute to the growing evidence that recreational fishing is an increasing threat to coastal ecosystems and that studying the effects of human activity at regional scales can provide insight into local effects and aid in early detection and potential remediation.

  16. Die Materials for Critical Applications and Increased Production Rates

    SciTech Connect

    David Schwam; John Wallace; Sebastian Birceanu

    2002-11-30

    Die materials for aluminum die-casting need to be resistant to heat checking, and have good resistance to washout and to soldering in a fast flow of molten aluminum. To resist heat checking, die materials should have a low coefficient of thermal expansion, high thermal conductivity, high hot yield strength, good temper softening resistance, high creep strength, and adequate ductility. To resist the washout and soldering, die materials should have high hot hardness, good temper resistance, low solubility in molten aluminum and good oxidation resistance. It is difficult for one material to satisfy with all above requirements. In practice, H13 steel is the most popular material for aluminum die casting dies. While it is not an ideal choice, it is substantially less expensive to use than alternative materials. However, in very demanding applications, it is sometimes necessary to use alternative materials to ensure a reasonable die life. Copper-base, nickel-base alloys and superalloys, titanium-,molybdenum-, tungsten-base alloys, and to some extent yttrium and niobium alloys, have all been considered as potential materials for demanding die casting applications. Most of these alloys exhibit superior thermal fatigue resistance, but suffer from other shortcomings.

  17. Potato Early Dying: Molecular Perspectives on Pathogenicity and Host Resistance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Potato early dying has not received the reputation of being a particularly devastating disease of potato. However, the interaction between the vascular fungus Verticillium dahliae and the root lesion nematode Pratylenchus penetrans to form the early dying complex makes studying this disease very in...

  18. Can We Humanize Dying in the General Hospital?

    ERIC Educational Resources Information Center

    Fleming, Stephen

    This paper reviews the literature on the behavior and attitudes of medical-nursing personnel toward the dying person and illustrates the frequent conflict between hospital staff and the needs of dying. Inner perturbation stemming from feelings of vicarious suffering, vicarious disintegration, or personal anxiety about death, education deficiencies…

  19. The Myriad Strategies for Seeking Control in the Dying Process

    ERIC Educational Resources Information Center

    Schroepfer, Tracy A.; Noh, Hyunjin; Kavanaugh, Melinda

    2009-01-01

    Purpose: This study explored the role control plays in the dying process of terminally ill elders by investigating the aspects of the dying process over which they seek to exercise control, the strategies they use, and whether they desire to exercise more control. Design and Methods: In-depth face-to-face interviews were conducted with 84…

  20. Death and Dying Anxiety among Elderly Arab Muslims in Israel

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Gigini, Ibrahim

    2010-01-01

    Death and dying anxiety were examined among elderly Arab Muslims in Israel. A total of 145 people aged 60 and over were interviewed using a standardized questionnaire. Nursing home residents reported higher death anxiety than others; women and uneducated participants reported greater levels of fear of death and dying than others. There were no…

  1. Death and Dying Anxiety among Bereaved and Nonbereaved Elderly Parents

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Tinsky-Roimi, Tal

    2011-01-01

    This study examines differences in death and dying anxiety between bereaved and nonbereaved elderly Israeli parents, as well as correlates of these factors among bereaved parents. A total of 97 parents (49 bereaved, 48 nonbereaved) completed measures of death and dying anxiety and religiosity. Bereaved parents reported significantly higher dying…

  2. A Study of the Training of Tool and Die Makers.

    ERIC Educational Resources Information Center

    Horowitz, Morris A.; Herrnstadt, Irwin L.

    To develop and test a methodology which would help determine the combination of education, training, and experience that is most likely to yield highly qualified workers in specific occupations, the tool and die maker trade was selected for examination in the Boston Metropolitan Area. Tool and die making was chosen because it is a clearly…

  3. Compassion in Dying v. State of Washington.

    PubMed

    1996-03-06

    The U.S. Court of Appeals for the Ninth Circuit, sitting en banc, affirmed a district court judgment that ruled unconstitutional a Washington statute banning assisted suicide, as applied to competent, terminally ill adults who wish to obtain prescription medication to hasten their deaths. The statute, which was challenged by a group of patients, physicians, and the nonprofit organization Compassion in Dying, was held to be unconstitutional because it violated the due process clause of the U.S. Constitution. The court took into consideration the interests of the state in protecting life, preventing suicides, preventing undue, arbitrary, or unfair influences on an individual's decision to end his life, and ensuring the integrity of the medical profession. These interests were balanced against an individual's strong liberty interest in determining how and when one's life should end. The court recognized this interest after assessing the growing public support for assisted suicide, changes in the causes of death and medical advances, and Supreme Court cases addressing due process liberty interests. The court then determined that the state's interest, which could be protected by adopting sufficient safeguards, did not outweigh the severe burden placed on the terminally ill, and thus the statute as applied was unconstitutional.

  4. Sonnet XXX: Love, dignity, and dying.

    PubMed

    Ely, E Wesley

    2016-05-01

    All of us in medicine who care for patients who are chronically critically ill, dying of incurable illnesses, will be faced with discussions about the value of their lives and about the appropriateness of ongoing supportive care. Such discussions are good and true, and they must always be done within the context of the sanctity of every human life and the promise of God that we are His children, each and every one of us. In this article, I explore the end-of-life path of a patient with amyotrophic lateral sclerosis (ALS) and the courageous faith that she demonstrated in the face of her illness. I explore with you, the reader, the hard-core conversations that took place at her bedside and their meaning in light of Catholic moral teaching. This story is not meant to indicate that we should always do all interventions at all times for all patients. That would be a teaching counter to Evangelium vitae. This story is meant to help you think through the path of your patients and of you as a physician or other type of healthcare professional in serving your patients. Primum non nocere. Ad majorem Dei gloriam.

  5. NICMOS PEERS INTO HEART OF DYING STAR

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The Egg Nebula, also known as CRL 2688, is shown on the left as it appears in visible light with the Hubble Space Telescope's Wide Field and Planetary Camera 2 (WFPC2) and on the right as it appears in infrared light with Hubble's Near Infrared Camera and Multi-Object Spectrometer (NICMOS). Since infrared light is invisible to humans, the NICMOS image has been assigned colors to distinguish different wavelengths: blue corresponds to starlight reflected by dust particles, and red corresponds to heat radiation emitted by hot molecular hydrogen. Objects like the Egg Nebula are helping astronomers understand how stars like our Sun expel carbon and nitrogen -- elements crucial for life -- into space. Studies on the Egg Nebula show that these dying stars eject matter at high speeds along a preferred axis and may even have multiple jet-like outflows. The signature of the collision between this fast-moving material and the slower outflowing shells is the glow of hydrogen molecules captured in the NICMOS image. The distance between the tip of each jet is approximately 200 times the diameter of our solar system (out to Pluto's orbit). Credits: Rodger Thompson, Marcia Rieke, Glenn Schneider, Dean Hines (University of Arizona); Raghvendra Sahai (Jet Propulsion Laboratory); NICMOS Instrument Definition Team; and NASA Image files in GIF and JPEG format and captions may be accessed on the Internet via anonymous ftp from ftp.stsci.edu in /pubinfo.

  6. The right to die: beyond academia.

    PubMed

    Ramsey, Carole

    2016-03-01

    The world's first legal euthanasia death occurred in the Australian City of Darwin on Sunday 22 September 1996 when Bob Dent ended his life under the Northern Territory's short-lived Rights of the Terminally Ill Act 1995. Dent's death intensified argument about euthanasia in Australia, transforming the debate from a textbook discussion in social ethics into a vigorous and divisive social dispute. The day before he ended his life, Dent dictated a letter, written down by his wife. This description of his experience with terminal illness is graphic-the letter, his last effort to bring the plight of those living with terminal illness to public consciousness. In this paper I outline issues from the perspective of those, who like Bob Dent, the choice to die with dignity is personal and urgent. Rather than approach the issue purely from the theoretical, academic debate therefore, I present aspects that are largely unknown unless the experience of life-denying symptoms becomes real. From these aspects, dilemmas and consequences emerge that are not framed through the academic debate and in this way, I argue for the possibility of a framework that could change the law.

  7. Catholic theology and the "right to die".

    PubMed

    Coleman, G D

    1985-03-01

    Catholic moral theology teaches that life is sacred but not absolute. Because life and all activities are subordinated to spiritual ends, it is moral to allow oneself to die when efforts to prolong life will bring no significant benefit and may even make it more difficult to finish life in peace, composure, and union with God. This is not the moral equivalent of suicide, but rather an acceptance of the human condition. In making such a decision, the distinction between morally ordinary and extraordinary means is crucial and based on the patient's total good. Ordinary means are those which offer a reasonable hope of benefit without excessive expense, pain, or other inconvenience. Extraordinary means are those which cannot be obtained without excessive burden or which, if used, would not offer a reasonable hope of benefit. Whether a medical procedure is standard or experimental does not, from a moral viewpoint, affect whether it is ordinary or extraordinary. In Catholic teaching, the patient has the paramount right to decide whether life-preserving measures will be used. If the patient is unable to make this decision, then the family should make it as the patient's representative.

  8. [To die alone, a big city problem?].

    PubMed

    Smith, E; Larsen, D F; Rosdahl, N

    2001-05-28

    The question whether being found dead is a problem related to living in a big city was examined by using death certificates from a 3-month period in 1994. The rates of persons found dead were higher for both sexes in the City of Copenhagen than in the rural County of Storstrøm. The age distribution showed that the rate increased with advancing age. The vast majority were found dead in their own home, although the rate was higher in Copenhagen than in Storstrøm. Whereas the manner of death was natural for the majority of cases in both areas, more deaths with an uncertain manner of death were recorded in Copenhagen than in Storstrøm (32% vs 9%). In general, suicide or accident was more often reported in those found dead in the County of Storstrøm than in those in Copenhagen. The cause of death was unknown in 46% of deaths in Copenhagen where 16% had died from external causes, proportions that were 58% and 21%, respectively, in Storstrøm. The rate of legal autopsies was higher in subjects with an uncertain manner of death than in the rest, and was also associated with an age below 40 years. We conclude that being found dead is related to living in a big city, although the reason(s) for this remains unidentified.

  9. Including die and press deformations in sheet metal forming simulations

    NASA Astrophysics Data System (ADS)

    Pilthammar, Johan; Sigvant, Mats; Kao-Walter, Sharon

    2016-08-01

    Structural analysis, in Abaqus, of a stamping die and subsequent morphing of the tool surfaces in AutoForm were performed to improve a sheet metal forming simulation. First, the tool surfaces of the XC90 rear door inner were scanned. They were not matching when the die was unloaded and could therefore not give any satisfying results in sheet metal forming simulations. Scanned surface geometries were then added to a structural FE-model of the complete stamping die and some influential parts of the production press. The structural FE- model was analysed with Abaqus to obtain the structural deformations of the die. The calculated surface shapes were then transferred to AutoForm where a forming simulation was performed. Results from the different sheet metal forming simulations were compared to measured draw in curves and showed a substantial increase in accuracy and ability to analyse dies in running production when the morphed surfaces were used.

  10. Der f 21, a novel allergen from dermatophagoides farina.

    PubMed

    Wu, Yulan; Jiang, Congli; Li, Meng; Yu, Haiqiong; Xiao, Xiaojun; Fan, Xiaoqin; Lin, Jianli; Liu, Xiaoyu; Zhang, Min; Yang, Pingchang; Liu, Zhigang

    2016-01-01

    The Dermatophagoides farina (D. farina) allergens are an important factor contributing to allergic disease. To identify new allergens is important for diagnosis and treatment of allergic diseases. In this study, we sought to characterize the biological activity of Der f 21 of D. farina. The recombinant Der f 21 protein was characterized by western-blot, ELISA and Skin prick test using clinic patient's serum.An allergic asthma mouse model was established with the rDer f 21 as a specific antigen. The results showed that the sera from 28.9% in 38 dust mite allergic children displayed positive results in response to rDer f 21, and 42% in 98 dust mite allergic patients displayed positive response in skin prick test. In addition, Immune inhibition assays showed there was IgE cross-reactivity between rDer f 21 and rDer f 5. Moreover, an allergic asthma mouse model was established. Airway hyperresponsiveness, serum specific IgE, IgG1, eosinophil infiltration in the allergic mice, interleukin-4(IL-4) and interferon-γ (INF-γ) from spleen cells were markedly increased in the allergic mice. The results demonstrate that Der f 21 is a novel allergen.

  11. Direct synthesis of van der Waals solids.

    PubMed

    Lin, Yu-Chuan; Lu, Ning; Perea-Lopez, Nestor; Li, Jie; Lin, Zhong; Peng, Xin; Lee, Chia Hui; Sun, Ce; Calderin, Lazaro; Browning, Paul N; Bresnehan, Michael S; Kim, Moon J; Mayer, Theresa S; Terrones, Mauricio; Robinson, Joshua A

    2014-04-22

    The stacking of two-dimensional layered materials, such as semiconducting transition metal dichalcogenides (TMDs), insulating hexagonal boron nitride (hBN), and semimetallic graphene, has been theorized to produce tunable electronic and optoelectronic properties. Here we demonstrate the direct growth of MoS2, WSe2, and hBN on epitaxial graphene to form large-area van der Waals heterostructures. We reveal that the properties of the underlying graphene dictate properties of the heterostructures, where strain, wrinkling, and defects on the surface of graphene act as nucleation centers for lateral growth of the overlayer. Additionally, we show that the direct synthesis of TMDs on epitaxial graphene exhibits atomically sharp interfaces. Finally, we demonstrate that direct growth of MoS2 on epitaxial graphene can lead to a 10(3) improvement in photoresponse compared to MoS2 alone.

  12. Hyperdislocations in van der Waals Layered Materials.

    PubMed

    Ly, Thuc Hue; Zhao, Jiong; Keum, Dong Hoon; Deng, Qingming; Yu, Zhiyang; Lee, Young Hee

    2016-12-14

    Dislocations are one-dimensional line defects in three-dimensional crystals or periodic structures. It is common that the dislocation networks made of interactive dislocations be generated during plastic deformation. In van der Waals layered materials, the highly anisotropic nature facilitates the formation of such dislocation networks, which is critical for the friction or exfoliation behavior for these materials. By transmission electron microscopy analysis, we found the topological defects in such dislocation networks can be perfectly rationalized in the framework of traditional dislocation theory, which we applied the name "hyperdislocations". Due to the strong pinning effect of hyperdislocations, the state of exfoliation can be easily triggered by 1° twisting between two layers, which also explains the origin of disregistry and frictionlessness for all of the superlubricants that are widely used for friction reduction and wear protection.

  13. De-tabooing dying control - a grounded theory study

    PubMed Central

    2013-01-01

    Background Dying is inescapable yet remains a neglected issue in modern health care. The research question in this study was “what is going on in the field of dying today?” What emerged was to eventually present a grounded theory of control of dying focusing specifically on how people react in relation to issues about euthanasia and physician-assisted suicide (PAS). Methods Classic grounded theory was used to analyze interviews with 55 laypersons and health care professionals in North America and Europe, surveys on attitudes to PAS among physicians and the Swedish general public, and scientific literature, North American discussion forum websites, and news sites. Results Open awareness of the nature and timing of a patient’s death became common in health care during the 1960s in the Western world. Open dying awareness contexts can be seen as the start of a weakening of a taboo towards controlled dying called de-tabooing. The growth of the hospice movement and palliative care, but also the legalization of euthanasia and PAS in the Benelux countries, and PAS in Montana, Oregon and Washington further represents de-tabooing dying control. An attitude positioning between the taboo of dying control and a growing taboo against questioning patient autonomy and self-determination called de-paternalizing is another aspect of de-tabooing. When confronted with a taboo, people first react emotionally based on “gut feelings” - emotional positioning. This is followed by reasoning and label wrestling using euphemisms and dysphemisms - reflective positioning. Rarely is de-tabooing unconditional but enabled by stipulated positioning as in soft laws (palliative care guidelines) and hard laws (euthanasia/PAS legislation). From a global perspective three shapes of dying control emerge. First, suboptimal palliative care in closed awareness contexts seen in Asian, Islamic and Latin cultures, called closed dying. Second, palliative care and sedation therapy, but not euthanasia

  14. Enhancements in Magnesium Die Casting Impact Properties

    SciTech Connect

    David Schwam; John F. Wallace; Yulong Zhu; Srinath Viswanathan; Shafik Iskander

    2000-06-30

    % in AM50 to over 9% in AZ91, more of the intermetallic Mg17Al12 is formed in the microstructure. For instance, for 15 increase in the aluminum content from AM50 to AM60, the volume fraction of eutectic present in the microstructure increases by 35%! Eventually, the brittle Mg17Al12 compound forms an interconnected network that reduces ductility and impact resistance. The lower aluminum in AM50 and AM60 are therefore a desirable feature in applications that call for higher impact resistance. Further improvement in impact resistance depends on the processing condition of the casting. Sound castings without porosity and impurities will have better mechanical properties. Since magnesium oxidizes readily, good melting and metal transfer practices are essential. The liquid metal has to be protected from oxidation at all times and entrainment of oxide films in the casting needs to be prevented. In this regard, there is evidence that us of vacuum to evacuate air from the die casting cavity can improve the quality of the castings. Fast cooling rates, leading to smaller grain size are beneficial and promote superior mechanical properties. Micro-segregation and banding are two additional defect types often encountered in magnesium alloys, in particular in AZ91D. While difficult to eliminate, segregation can be minimized by careful thermal management of the dies and the shot sleeve. A major source of segregation is the premature solidification in the shot sleeve. The primary solid dendrites are carried into the casting and form a heterogeneous structure. Furthermore, during the shot, segregation banding can occur. The remedies for this kind of defects include a hotter shot sleeve, use of insulating coatings on the shot sleeve and a short lag time between pouring into the shot sleeve and the shot.

  15. Optimization of Composition and Heat Treating of Die Steels for Extended Lifetime

    SciTech Connect

    David Schwam; John F. Wallace; Quanyou Zhou

    2002-01-30

    An ''average'' die casting die costs fifty thousand dollars. A die used in making die cast aluminum engine blocks can cost well over one million dollars. These costs provide a strong incentive for extension of die life. While vacuum quenched Premium Grade H13 dies have become the most widely used in the United States, tool makers and die casters are constantly searching for new steels and heat treating procedures to extend die life. This project was undertaken to investigate the effects of composition and heat treating on die life and optimize these parameters.

  16. [Why do Hungarian men die early?].

    PubMed

    Kopp, Mária; Skrabski, Arpád

    2009-09-01

    The mortality rate for 40- 69-year-old men was 12.2/thousand males of corresponding age in 1960 and 16.2 in 2005: it increased by 33%, while among 40- 69-year-old women it decreased from 9.6 0/thousand females of corresponding age to 7.8. The aim of the present follow up study was to analyze which psychosocial risk factors might explain the high premature mortality rates among Hungarian men. Participants in the Hungarostudy 2002 study, a nationally representative sample, 1130 men and 1529 women were contacted again in the follow up study in 2006, who in 2002 were between the age of 40-69 years. By 2006, 99 men (8.8%) and 53 women (3.5%) died in this age group. Socio-economic, psychosocial and work-related measures, self-rated health, chronic disorders, depressive symptoms (BDI), WHO well-being, negative affect, self-efficacy, meaning in life and health behavioral factors were included in the analysis. After adjustment according to smoking, alcohol abuse, BMI, education and age, a number of variables were significant predictors of mortality only in men: low education, low subjective social status, low personal and family income, insecurity of work, no control in work, severe depression, no meaning in life, low social support from spouse, low social support from child. Socio-economic and work related risk factors predicted only male premature death. Among women dissatisfaction with personal relations was the most important risk factor. Among men depression seems to mediate between these chronic stress factors and premature death.

  17. A DYING STAR IN GLOBULAR CLUSTER

    NASA Technical Reports Server (NTRS)

    2002-01-01

    A DYING STAR IN GLOBULAR CLUSTER M15 The globular cluster Messier 15 is shown in this color image obtained with the NASA Hubble Space Telescope's Wide Field Planetary Camera 2 (WFPC2). Lying some 40,000 light-years from Earth in the direction of the constellation Pegasus, M15 is one of nearly 150 known globular clusters that form a vast halo surrounding our Milky Way galaxy. Each of these clusters is a spherical association of hundreds of thousands of ancient stars. The image, prepared by the Hubble Heritage team, attempts to show the stars in M15 in their true colors. The brightest cluster stars are red giants, with an orange color due to surface temperatures lower than our Sun's. Most of the fainter stars are hotter, giving them a bluish-white color. If we lived in the core of M15, our sky would blaze with tens of thousands of brilliant stars both day and night! Nestled among the myriads of stars visible in the Hubble image is an astronomical oddity. The pinkish object to the upper left of the cluster's core is a gas cloud surrounding a dying star. Known as Kuestner 648, this was the first planetary nebula to be identified in a globular cluster. In 1928, F. G. Pease, working at the 100-inch telescope of California's Mount Wilson Observatory, photographed the spectrum of K 648 and discovered the telltale bright emission of a nebular gas cloud rather than a normal star. In the ensuing 70 years, only three more planetary nebulae have been discovered in globular clusters. The stars in M15 and other globular clusters are estimated to be about 12 billion years old. They were among the first generations of stars to form in the Milky Way. Our Sun, by comparison, is a youthful 4.6 billion years old. As a star like the Sun ages, it exhausts the hydrogen that fuels its nuclear fusion, and increases in size to become a red giant. Then it ejects its outer layers into space, producing a planetary nebula. The remnant star at the center of the nebula gradually dies away as a

  18. A DYING STAR IN GLOBULAR CLUSTER

    NASA Technical Reports Server (NTRS)

    2002-01-01

    A DYING STAR IN GLOBULAR CLUSTER M15 The globular cluster Messier 15 is shown in this color image obtained with the NASA Hubble Space Telescope's Wide Field Planetary Camera 2 (WFPC2). Lying some 40,000 light-years from Earth in the direction of the constellation Pegasus, M15 is one of nearly 150 known globular clusters that form a vast halo surrounding our Milky Way galaxy. Each of these clusters is a spherical association of hundreds of thousands of ancient stars. The image, prepared by the Hubble Heritage team, attempts to show the stars in M15 in their true colors. The brightest cluster stars are red giants, with an orange color due to surface temperatures lower than our Sun's. Most of the fainter stars are hotter, giving them a bluish-white color. If we lived in the core of M15, our sky would blaze with tens of thousands of brilliant stars both day and night! Nestled among the myriads of stars visible in the Hubble image is an astronomical oddity. The pinkish object to the upper left of the cluster's core is a gas cloud surrounding a dying star. Known as Kuestner 648, this was the first planetary nebula to be identified in a globular cluster. In 1928, F. G. Pease, working at the 100-inch telescope of California's Mount Wilson Observatory, photographed the spectrum of K 648 and discovered the telltale bright emission of a nebular gas cloud rather than a normal star. In the ensuing 70 years, only three more planetary nebulae have been discovered in globular clusters. The stars in M15 and other globular clusters are estimated to be about 12 billion years old. They were among the first generations of stars to form in the Milky Way. Our Sun, by comparison, is a youthful 4.6 billion years old. As a star like the Sun ages, it exhausts the hydrogen that fuels its nuclear fusion, and increases in size to become a red giant. Then it ejects its outer layers into space, producing a planetary nebula. The remnant star at the center of the nebula gradually dies away as a

  19. Compaction die for forming a solid annulus on a right circular cylinder. [Patent application

    DOEpatents

    Harlow, J.L.

    1981-09-14

    A compacting die is disclosed wherein the improvement comprises providing a screen in the die cavity, the screen being positioned parallel to the side walls of said die and dividing the die cavity into center and annular compartments. In addition, the use of this die in a method for producing an annular clad ceramic fuel material is disclosed.

  20. Crystallization and preliminary X-ray analysis of Der f 2, a potent allergen derived from the house dust mite (Dermatophagoides farinae)

    NASA Technical Reports Server (NTRS)

    Roeber, Dana; Achari, Aniruddha; Takai, Toshiro; Okumura, Yasushi; Scott, David L.

    2003-01-01

    Although a number of allergens have been identified and isolated, the underlying molecular basis for the potent immune response is poorly understood. House dust mites (Dermatophagoides sp.) are ubiquitous contributors to atopy in developed countries. The rhinitis, dermatitis and asthma associated with allergic reactions to these arthropods are frequently caused by relatively small (125-129 amino acids) mite proteins of unknown biological function. Der f 2, a major allergen from the mite D. farinae, has been recombinantly expressed, characterized and crystallized. The crystals belong to the tetragonal space group I4(1)22, with unit-cell parameters a = b = 95.2, c = 103.3 A. An essentially complete (97.2%) data set has been collected to 2.4 A at a synchrotron source. Attempts to solve the crystal structure of Der f 2 by molecular replacement using the NMR coordinates for either Der f 2 or Der p 2 (the homologous protein from D. pteronyssinus) failed, but preliminary searches using the crystalline Der p 2 atomic coordinates appear to be promising.

  1. Experiences of Living and Dying With COPD

    PubMed Central

    Giacomini, M; DeJean, D; Simeonov, D; Smith, A

    2012-01-01

    Executive Summary In July 2010, the Medical Advisory Secretariat (MAS) began work on a Chronic Obstructive Pulmonary Disease (COPD) evidentiary framework, an evidence-based review of the literature surrounding treatment strategies for patients with COPD. This project emerged from a request by the Health System Strategy Division of the Ministry of Health and Long-Term Care that MAS provide them with an evidentiary platform on the effectiveness and cost-effectiveness of COPD interventions. After an initial review of health technology assessments and systematic reviews of COPD literature, and consultation with experts, MAS identified the following topics for analysis: vaccinations (influenza and pneumococcal), smoking cessation, multidisciplinary care, pulmonary rehabilitation, long-term oxygen therapy, noninvasive positive pressure ventilation for acute and chronic respiratory failure, hospital-at-home for acute exacerbations of COPD, and telehealth (including telemonitoring and telephone support). Evidence-based analyses were prepared for each of these topics. For each technology, an economic analysis was also completed where appropriate. In addition, a review of the qualitative literature on patient, caregiver, and provider perspectives on living and dying with COPD was conducted, as were reviews of the qualitative literature on each of the technologies included in these analyses. The Chronic Obstructive Pulmonary Disease Mega-Analysis series is made up of the following reports, which can be publicly accessed at the MAS website at: http://www.hqontario.ca/en/mas/mas_ohtas_mn.html. Chronic Obstructive Pulmonary Disease (COPD) Evidentiary Framework Influenza and Pneumococcal Vaccinations for Patients With Chronic Obstructive Pulmonary Disease (COPD): An Evidence-Based Analysis Smoking Cessation for Patients With Chronic Obstructive Pulmonary Disease (COPD): An Evidence-Based Analysis Community-Based Multidisciplinary Care for Patients With Stable Chronic Obstructive

  2. Isotope separation by photodissociation of Van der Waal's molecules

    DOEpatents

    Lee, Yuan T.

    1977-01-01

    A method of separating isotopes based on the dissociation of a Van der Waal's complex. A beam of molecules of a Van der Waal's complex containing, as one partner of the complex, a molecular species in which an element is present in a plurality of isotopes is subjected to radiation from a source tuned to a frequency which will selectively excite vibrational motion by a vibrational transition or through electronic transition of those complexed molecules of the molecular species which contain a desired isotope. Since the Van der Waal's binding energy is much smaller than the excitational energy of vibrational motion, the thus excited Van der Waal's complex dissociate into molecular components enriched in the desired isotope. The recoil velocity associated with vibrational to translational and rotational relaxation will send the separated molecules away from the beam whereupon the product enriched in the desired isotope can be separated from the constituents of the beam.

  3. Drought's legacy: multiyear hydraulic deterioration underlies widespread aspen forest die-off and portends increased future risk.

    PubMed

    Anderegg, William R L; Plavcová, Lenka; Anderegg, Leander D L; Hacke, Uwe G; Berry, Joseph A; Field, Christopher B

    2013-04-01

    Forest mortality constitutes a major uncertainty in projections of climate impacts on terrestrial ecosystems and carbon-cycle feedbacks. Recent drought-induced, widespread forest die-offs highlight that climate change could accelerate forest mortality with its diverse and potentially severe consequences for the global carbon cycle, ecosystem services, and biodiversity. How trees die during drought over multiple years remains largely unknown and precludes mechanistic modeling and prediction of forest die-off with climate change. Here, we examine the physiological basis of a recent multiyear widespread die-off of trembling aspen (Populus tremuloides) across much of western North America. Using observations from both native trees while they are dying and a rainfall exclusion experiment on mature trees, we measure hydraulic performance over multiple seasons and years and assess pathways of accumulated hydraulic damage. We test whether accumulated hydraulic damage can predict the probability of tree survival over 2 years. We find that hydraulic damage persisted and increased in dying trees over multiple years and exhibited few signs of repair. This accumulated hydraulic deterioration is largely mediated by increased vulnerability to cavitation, a process known as cavitation fatigue. Furthermore, this hydraulic damage predicts the probability of interyear stem mortality. Contrary to the expectation that surviving trees have weathered severe drought, the hydraulic deterioration demonstrated here reveals that surviving regions of these forests are actually more vulnerable to future droughts due to accumulated xylem damage. As the most widespread tree species in North America, increasing vulnerability to drought in these forests has important ramifications for ecosystem stability, biodiversity, and ecosystem carbon balance. Our results provide a foundation for incorporating accumulated drought impacts into climate-vegetation models. Finally, our findings highlight the

  4. Reaktive Tracer zur Bestimmung der sedimentären Aquifer-Oxidationskapazität im Labor- und Feldversuch

    NASA Astrophysics Data System (ADS)

    Dethlefsen, Frank; Bliss, Fabian; Wachter, Thorsten; Dahmke, Andreas

    Kurzfassung Mikrobiell reduzierbares Eisen(III) im Aquifer kann als Elektronenakzeptor von großer Bedeutung für Natural Attenuation (NA) von aromatischen Kohlenwasserstoffen sein und bildet den Hauptbestandteil der sedimentären Oxidationskapazität (OXC) des Aquifers. Untersuchungsgegenstand war der Vergleich traditioneller, nasschemischer Methoden mit neuentwickelten, reaktiven Tracerverfahren zur Bestimmung der sedimentären OXC. Die innovativen Tracermethoden haben gegenüber nasschemischen Extraktionsverfahren den prinzipiellen Vorteil, dass sie einen integralen Ansatz zur Bestimmung der sedimentären OXC bilden, weil geochemische und hydraulische Heterogenitäten des Aquifers berücksichtigt werden. Daher wurden am RETZINA-Standort Zeitz einerseits herkömmliche Säure-Extraktionsmethoden (bestimmter Eisen(III)-Gehalt: 0,43 +/- 0,07 mg/g Aquifermaterial) und andererseits reaktive Tracertests mit Phosphat-(Eisen(III): 1,0 mg/g) und Sulfidtracern (Eisen(III): 0,31 +/- 0,02 mg/g) in Laborversuchen sowie Bioabbauversuche mit Toluol als Kohlenstoffquelle undGeobacter metallireducensals Eisen(III)-Reduzierer (Eisen(III): 1,0 mg/g) durchgeführt. Sulfid als reaktiver Tracer wurde in Form eines 〝Push-Pull-Tests`` im Feldversuch eingesetzt (Eisen(III): 1,1 mg/g). Zudem bedeutet die Anwendung des Feld-Tracerverfahrens deutlich weniger Zeitaufwand in der Durchführung als die Anwendung traditioneller Extraktionsmethoden. Microbially reducible iron(III) is important as a terminal electron acceptor for the Natural Attenuation (NA) of aromatic hydrocarbons and forms the balance of the aquifer's sedimentary oxidation capacity (OXC). It was the aim of this investigation to compare traditional acid extraction methods to reactive tracer methods in quantifying the sedimentary OXC. The sedimentary OXC at the RETZINA test site in Zeitz was therefore determined through traditional acid extraction methods (determined Iron(III)-content: 0.43 +/- 0.07 mg/g aquifer material) and

  5. Physik gestern und heute Von der Metallstange zum Hochenergielaser

    NASA Astrophysics Data System (ADS)

    Heering, Peter

    2002-05-01

    Im Mai 1752 wurde in Marly bei Paris auf Anregung des amerikanischen Forschers und Politikers Benjamin Franklin erstmals die elektrische Natur des Blitzes nachgewiesen. Damals beschrieb Franklin auch eine technische Vorrichtung, die als Schutz von Gebäuden vor Blitzschlägen dienen sollte: den Blitzableiter. Diese aus heutiger Sicht scheinbar triviale Vorrichtung wurde aber keineswegs unmittelbar akzeptiert. Und bis heute ist die Forschung zum Schutz von Einrichtungen vor Blitzschlägen nicht abgeschlossen.

  6. Characterization of Spray Lubricants for the Die Casting Process

    SciTech Connect

    Sabau, Adrian S

    2008-01-01

    During the die casting process, lubricants are sprayed in order to cool the dies and facilitate the ejection of the casting. The cooling effects of the die lubricant were investigated using Thermogravimetric analysis (TGA), heat flux sensors (HFS), and infrared imaging. The evolution of the heat flux and pictures taken using a high speed infrared camera revealed that lubricant application was a transient process. The short time response of the HFS allows the monitoring and data acquisition of the surface temperature and heat flux without additional data processing. A similar set of experiments was performed with deionized water in order to assess the lubricant effect. The high heat flux obtained at 300 C was attributed to the wetting and absorbant properties of the lubricant. Pictures of the spray cone and lubricant flow on the die were also used to explain the heat flux evolution.

  7. 8. INTERIOR BEADED WALL BOARDING SHOWING TRIAL MARKS FROM DIES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. INTERIOR BEADED WALL BOARDING SHOWING TRIAL MARKS FROM DIES MADE IN CARPENTER'S SHOP Ph: Jack E, Boucher - March 1961 - Joseph Carpenter Silversmith Shop, 71 East Town Street, Norwichtown, New London County, CT

  8. Method and Apparatus for Die Forming Metal Sheets and Extrusions.

    DTIC Science & Technology

    of a variety of die blocks for introducing a variety of angled joggles in the metal sheets and extrusions. Relatively low melting temperature material is used for the castings. Keywords: Patents; Aircraft parts. (kt)

  9. MICROORGANISMS DIE-OFF RATES IN URBAN STORMWATER RUNOFF 2007

    EPA Science Inventory

    Stormwater best management practices (BMPs) are often considered effective tools to mitigate the effects of stormwater pollutants before they are discharged to receiving waters. However, BMP performance for microorganisms removal is not well documented. Microorganisms die-off in...

  10. MICROORGANISMS DIE-OFF RATES IN URBAN STORMWATER RUNOFF 2007

    EPA Science Inventory

    Stormwater best management practices (BMPs) are often considered effective tools to mitigate the effects of stormwater pollutants before they are discharged to receiving waters. However, BMP performance for microorganisms removal is not well documented. Microorganisms die-off in ...

  11. Chemical strategies for die/wafer submicron alignment and bonding.

    SciTech Connect

    Martin, James Ellis; Baca, Alicia I.; Chu, Dahwey; Rohwer, Lauren Elizabeth Shea

    2010-09-01

    This late-start LDRD explores chemical strategies that will enable sub-micron alignment accuracy of dies and wafers by exploiting the interfacial energies of chemical ligands. We have micropatterned commensurate features, such as 2-d arrays of micron-sized gold lines on the die to be bonded. Each gold line is functionalized with alkanethiol ligands before the die are brought into contact. The ligand interfacial energy is minimized when the lines on the die are brought into registration, due to favorable interactions between the complementary ligand tails. After registration is achieved, standard bonding techniques are used to create precision permanent bonds. We have computed the alignment forces and torque between two surfaces patterned with arrays of lines or square pads to illustrate how best to maximize the tendency to align. We also discuss complex, aperiodic patterns such as rectilinear pad assemblies, concentric circles, and spirals that point the way towards extremely precise alignment.

  12. Compassion in Dying v. State of Washington.

    PubMed

    1995-03-09

    The U.S. Court of Appeals, Ninth Circuit, reversed a district court decision that had declared unconstitutional a Washington state statute making it a felony knowingly to cause or aid another person to attempt suicide. The lower court had invalidated the statute on the basis that it violated the plaintiffs' Fourteenth Amendment liberty and equal protection rights and had likened the right to commit suicide to the right to an abortion. The district court also found that no constitutional distinction could be made between the competent terminally ill who could elect to end their lives by having life support discontinued and the terminally ill seeking physician assistance to commit suicide. The Court of Appeals held that the statute did not deprive persons seeking physician-assisted suicide of constitutionally protected liberty interest and that facial invalidation of the statute was unwarranted.

  13. Modified Van der Waals equation and law of corresponding states

    NASA Astrophysics Data System (ADS)

    Zhong, Wei; Xiao, Changming; Zhu, Yongkai

    2017-04-01

    It is well known that the Van der Waals equation is a modification of the ideal gas law, yet it can be used to describe both gas and liquid, and some important messages can be obtained from this state equation. However, the Van der Waals equation is not a precise state equation, and it does not give a good description of the law of corresponding states. In this paper, we expand the Van der Waals equation into its Taylor's series form, and then modify the fourth order expansion by changing the constant Virial coefficients into their analogous ones. Via this way, a more precise result about the law of corresponding states has been obtained, and the law of corresponding states can then be expressed as: in terms of the reduced variables, all fluids should obey the same equation with the analogous Virial coefficients. In addition, the system of 3 He with quantum effects has also been taken into consideration with our modified Van der Waals equation, and it is found that, for a normal system without quantum effect, the modification on ideal gas law from the Van der Waals equation is more significant than the real case, however, for a system with quantum effect, this modification is less significant than the real case, thus a factor is introduced in this paper to weaken or strengthen the modification of the Van der Waals equation, respectively.

  14. A Molecular Basis of Cancer.

    ERIC Educational Resources Information Center

    Weinberg, Robert A.

    1983-01-01

    Discusses the molecular basis of cancer, focusing on genetics of the disease. Indicates that human cancers are initiated by oncogenes (altered versions of normal genes) and that in one case the critical alteration is a single point mutation that changes one amino acid in the protein encoded by the gene. (JN)

  15. GASB's Basis of Accounting Project.

    ERIC Educational Resources Information Center

    Kovlak, Daniel L.

    1986-01-01

    In July 1984, the Governmental Accounting Standards Board began its "Measurement Focus/Basis of Accounting" project, which addresses measurement issues and revenue and expenditure recognition problems involving governmental funds. This article explains the project's background, alternatives discussed by the board, and tentative…

  16. Cost analysis of medical assistance in dying in Canada

    PubMed Central

    Trachtenberg, Aaron J.; Manns, Braden

    2017-01-01

    BACKGROUND: The legalization of medical assistance in dying will affect health care spending in Canada. Our aim was to determine the potential costs and savings associated with the implementation of medical assistance in dying. METHODS: Using published data from the Netherlands and Belgium, where medically assisted death is legal, we estimated that medical assistance in dying will account for 1%–4% of all deaths; 80% of patients will have cancer; 50% of patients will be aged 60–80 years; 55% will be men; 60% of patients will have their lives shortened by 1 month; and 40% of patients will have their lives shortened by 1 week. We combined current mortality data for the Canadian population with recent end-of-life cost data to calculate a predicted range of savings associated with the implementation of medical assistance in dying. We also estimated the direct costs associated with offering medically assisted death, including physician consultations and drug costs. RESULTS: Medical assistance in dying could reduce annual health care spending across Canada by between $34.7 million and $138.8 million, exceeding the $1.5–$14.8 million in direct costs associated with its implementation. In sensitivity analyses, we noted that even if the potential savings are overestimated and costs underestimated, the implementation of mdedical assistance in dying will likely remain at least cost neutral. INTERPRETATION: Providing medical assistance in dying in Canada should not result in any excess financial burden to the health care system, and could result in substantial savings. Additional data on patients who choose medical assistance in dying in Canada should be collected to enable more precise estimates of the impact of medically assisted death on health care spending and to enable further economic evaluation. PMID:28246154

  17. Consortia for Known Good Die (KGD). Phase 1

    DTIC Science & Technology

    1994-02-01

    were being actively developed for test and bum-in of bare die or minimally packaged die. The companies plan to make the technology available to the...lifetime (up to the consensus single best technology for making temporary 1000 cycle limit) reducing cost. Cost impact of caner probe contact to...model and develop the system specification for Im oe _ side 40O extensions to make this a useful tool for industrial users 2 CPU 10 mm on each side 2001

  18. Microstructures and properties of aluminum die casting alloys

    SciTech Connect

    M. M. Makhlouf; D. Apelian; L. Wang

    1998-10-01

    This document provides descriptions of the microstructure of different aluminum die casting alloys and to relate the various microstructures to the alloy chemistry. It relates the microstructures of the alloys to their main engineering properties such as ultimate tensile strength, yield strength, elongation, fatigue life, impact resistance, wear resistance, hardness, thermal conductivity and electrical conductivity. Finally, it serves as a reference source for aluminum die casting alloys.

  19. Complete Basis Set Model Chemistries

    NASA Astrophysics Data System (ADS)

    Ochterski, Joseph Wallace

    1994-01-01

    The major source of error in most ab initio calculations of molecular energies is the truncation of the one-electron basis set. Extrapolation to the complete basis set second -order (CBS2) limit using the N^{-1 } asymptotic convergence of N-configuration pair natural orbital (PNO) expansions can be combined with the use of relatively small basis sets for the higher-order correlation energy to develop cost effective computational models. Following this strategy, four new computational models denoted CBS-4, CBS-q, CBS-Q, and CBS-QCI/APNO are introduced. The mean absolute deviations (MAD) from experiment for the 125 energies of the G2 test set are 2.0, 1.7, 1.0 and 0.5 kcal/mol, respectively. The error distributions for all six models are indistinguishable from Gaussian distribution functions. Calculations on the cyclopropenyl radical and cyclopropenylidene provide new dissociation energies which are in accord with an interpretation of the thermochemistry emphasizing aromaticity. Several levels of theory are examined as candidates for the routine calculation of molecular geometries. The very simple UHF/3-21G* model gives bond lengths to an accuracy of +/-0.027 A compared with experiment for a test set of 69 small molecules. The commonly used MP2/6-31G* model (RMS error 0.025 A) offers virtually no improvement and use of the considerably more expensive QCISD calculations with the same basis set provides only a modest reduction to 0.020 A. However, spin projected MP3 calculations with a modified basis set including f -functions on Si, P, S, and Cl, reduce the RMS error to 0.010 A. This PMP3/6-31Gdf* model is recommended as a general scheme of geometry optimization for small molecules. The equilibrium structure and binding energy of the water dimer have been determined for several levels of ab initio theory. The basis set convergence of the SCF energy, the intramolecular and intermolecular MP2 energy, and higher-order effects, are examined separately and realistic error

  20. Herbivory drives the spread of salt marsh die-off.

    PubMed

    Bertness, Mark D; Brisson, Caitlin P; Bevil, Matthew C; Crotty, Sinead M

    2014-01-01

    Salt marsh die-off is a Western Atlantic conservation problem that has recently spread into Narragansett Bay, Rhode Island, USA. It has been hypothesized to be driven by: 1) eutrophication decreasing plant investment into belowground biomass causing plant collapse, 2) boat wakes eroding creek banks, 3) pollution or disease affecting plant health, 4) substrate hardness controlling herbivorous crab distributions and 5) trophic dysfunction releasing herbivorous crabs from predator control. To distinguish between these hypotheses we quantified these variables at 14 Narragansett Bay salt marshes where die-off intensity ranged from <5% to nearly 98%. Nitrogen availability, wave intensity and plant growth did not explain any variation in die-off. Herbivory explained 73% of inter-site variation in die-off and predator control of herbivores and substrate hardness also varied significantly with die-off. This suggests that salt marsh die-off is being largely driven by intense herbivory via the release of herbivorous crabs from predator control. Our results and those from other marsh systems suggest that consumer control may not simply be a factor to consider in marsh conservation, but with widespread predator depletion impacting near shore habitats globally, trophic dysfunction and runaway consumption may be the largest and most urgent management challenge for salt marsh conservation.

  1. SiC Die Attach for High-Temperature Applications

    NASA Astrophysics Data System (ADS)

    Drevin-Bazin, A.; Lacroix, F.; Barbot, J.-F.

    2013-11-01

    Eutectic solders AuIn19 and AuGe12 and nanosilver paste were investigated for SiC die attach in high-temperature (300°C) applications. The soldering or sintering conditions were optimized through die shear tests performed at room temperature. In particular, application of static pressure (3.5 MPa) during sintering resulted in greatly improved mechanical behavior of the nanosilver-based joint. Microstructural study of the eutectic solders showed formation of Au-rich grains in AuGe die attach and significant diffusion of Au and In through the Ni layer in AuIn19 die attach, which could lead to formation of intermetallic compounds. Die shear tests versus temperature showed that the behaviors of the studied die attaches are different; nevertheless they present suitable shear strengths required for high-temperature applications. The mechanical behavior of joints under various levels of thermal and mechanical stress was also studied. Creep experiments were carried out on the eutectic solders to describe the thermomechanical behavior of the complete module; only one creep mechanism was observed in the working range.

  2. Dying while living: a critique of allowing-to-die legislation.

    PubMed Central

    Lappé, M

    1978-01-01

    Several US states are enacting 'right-to-die' laws, in the wake of the Karen Quinlan case. But the way such a law is drafted may cast doubt on a patient's existing common law right to control all aspects of his own treatment; it may give legal sanction to a lower standard of medical care that society at present expects from doctors; and it may lead to conflict between the patient's directive and his doctor's clinical judgement which cannot readily be resolved. The laws themselves are categorised as a) legalising active killing or b) defining rights of patients to control treatment or c) assigning to others the rights to control treatment where the patient is not competent. The California law is discussed critically. The conclusion is that such legislation is not a satisfactory answer to the ethical problem of euthanasia. PMID:739516

  3. Grote Reber, Radio Astronomy Pioneer, Dies

    NASA Astrophysics Data System (ADS)

    2002-12-01

    Grote Reber, one of the earliest pioneers of radio astronomy, died in Tasmania on December 20, just two days shy of his 91st birthday. Reber was the first person to build a radio telescope dedicated to astronomy, opening up a whole new "window" on the Universe that eventually produced such landmark discoveries as quasars, pulsars and the remnant "afterglow" of the Big Bang. His self- financed experiments laid the foundation for today's advanced radio-astronomy facilities. Grote Reber Grote Reber NRAO/AUI photo "Radio astronomy has changed profoundly our understanding of the Universe and has earned the Nobel Prize for several major contributions. All radio astronomers who have followed him owe Grote Reber a deep debt for his pioneering work," said Dr. Fred Lo, director of the National Radio Astronomy Observatory (NRAO). "Reber was the first to systematically study the sky by observing something other than visible light. This gave astronomy a whole new view of the Universe. The continuing importance of new ways of looking at the Universe is emphasized by this year's Nobel Prizes in physics, which recognized scientists who pioneered X-ray and neutrino observations," Lo added. Reber was a radio engineer and avid amateur "ham" radio operator in Wheaton, Illinois, in the 1930s when he read about Karl Jansky's 1932 discovery of natural radio emissions coming from outer space. As an amateur operator, Reber had won awards and communicated with other amateurs around the world, and later wrote that he had concluded "there were no more worlds to conquer" in radio. Learning of Jansky's discovery gave Reber a whole new challenge that he attacked with vigor. Analyzing the problem as an engineer, Reber concluded that what he needed was a parabolic-dish antenna, something quite uncommon in the 1930s. In 1937, using his own funds, he constructed a 31.4-foot-diameter dish antenna in his back yard. The strange contraption attracted curious attention from his neighbors and became

  4. Van der Waals Effects on semiconductor clusters.

    PubMed

    Li, Haisheng; Chen, Weiguang; Han, Xiaoyu; Li, Liben; Sun, Qiang; Guo, Zhengxiao; Jia, Yu

    2015-09-30

    Van der Waals (vdW) interactions play an important role on semiconductors in nanoscale. Here, we utilized first-principles calculations based on density functional theory to demonstrate the growth mode transition from prolate to multiunit configurations for Gen (n = 10-50) clusters. In agreement with the injected ion drift tube techniques that "clusters with n < 70 can be thought of as loosely bound assemblies of small strongly bound fragments (such as Ge7 and Ge10 )," we found these stable fragments are connected by Ge6 , Ge9 , or Ge10 unit (from bulk diamond), via strong covalent bonds. Our calculated cations usually fragment to Ge7 and Ge10 clusters, in accordance with the experiment results that the spectra Ge7 and Ge10 correspond to the mass abundance spectra. By controlling a germanium cluster with vdW interactions parameters in the program or not, we found that the vdW effects strengthen the covalent bond from different units more strikingly than that in a single unit. With more bonds between units than the threadlike structures, the multiunit structures have larger vdW energies, explaining why the isolated nanowires are harder to produce. © 2015 Wiley Periodicals, Inc.

  5. Van der Waals Interactions Involving Proteins

    NASA Technical Reports Server (NTRS)

    Roth, Charles M.; Neal, Brian L.; Lenhoff, Abraham M.

    1996-01-01

    Van der Waals (dispersion) forces contribute to interactions of proteins with other molecules or with surfaces, but because of the structural complexity of protein molecules, the magnitude of these effects is usually estimated based on idealized models of the molecular geometry, e.g., spheres or spheroids. The calculations reported here seek to account for both the geometric irregularity of protein molecules and the material properties of the interacting media. Whereas the latter are found to fall in the generally accepted range, the molecular shape is shown to cause the magnitudes of the interactions to differ significantly from those calculated using idealized models. with important consequences. First, the roughness of the molecular surface leads to much lower average interaction energies for both protein-protein and protein-surface cases relative to calculations in which the protein molecule is approximated as a sphere. These results indicate that a form of steric stabilization may be an important effect in protein solutions. Underlying this behavior is appreciable orientational dependence, one reflection of which is that molecules of complementary shape are found to exhibit very strong attractive dispersion interactions. Although this has been widely discussed previously in the context of molecular recognition processes, the broader implications of these phenomena may also be important at larger molecular separations, e.g., in the dynamics of aggregation, precipitation, and crystal growth.

  6. Van der Waals Interactions in Aspirin

    NASA Astrophysics Data System (ADS)

    Reilly, Anthony; Tkatchenko, Alexandre

    2015-03-01

    The ability of molecules to yield multiple solid forms, or polymorphs, has significance for diverse applications ranging from drug design and food chemistry to nonlinear optics and hydrogen storage. In particular, aspirin has been used and studied for over a century, but has only recently been shown to have an additional polymorphic form, known as form II. Since the two observed solid forms of aspirin are degenerate in terms of lattice energy, kinetic effects have been suggested to determine the metastability of the less abundant form II. Here, first-principles calculations provide an alternative explanation based on free-energy differences at room temperature. The explicit consideration of many-body van der Waals interactions in the free energy demonstrates that the stability of the most abundant form of aspirin is due to a subtle coupling between collective electronic fluctuations and quantized lattice vibrations. In addition, a systematic analysis of the elastic properties of the two forms of aspirin rules out mechanical instability of form II as making it metastable.

  7. Van der Waals Force Assisted Heat Transfer

    NASA Astrophysics Data System (ADS)

    Sasihithlu, K.; Pendry, J. B.; Craster, R. V.

    2017-02-01

    Phonons (collective atomic vibrations in solids) are more effective in transporting heat than photons. This is the reason why the conduction mode of heat transport in nonmetals (mediated by phonons) is dominant compared to the radiation mode of heat transport (mediated by photons). However, since phonons are unable to traverse a vacuum gap (unlike photons), it is commonly believed that two bodies separated by a gap cannot exchange heat via phonons. Recently, a mechanism was proposed [J. B. Pendry, K. Sasihithlu, and R. V. Craster, Phys. Rev. B 94, 075414 (2016)] by which phonons can transport heat across a vacuum gap - through the Van der Waals interaction between two bodies with gap less than the wavelength of light. Such heat transfer mechanisms are highly relevant for heating (and cooling) of nanostructures; the heating of the flying heads in magnetic storage disks is a case in point. Here, the theoretical derivation for modelling phonon transmission is revisited and extended to the case of two bodies made of different materials separated by a vacuum gap. Magnitudes of phonon transmission, and hence the heat transfer, for commonly used materials in the micro- and nano-electromechanical industry are calculated and compared with the calculation of conduction heat transfer through air for small gaps as well as the heat transfer calculation due to photon exchange.

  8. Van der Waals interactions involving proteins.

    PubMed Central

    Roth, C M; Neal, B L; Lenhoff, A M

    1996-01-01

    Van der Waals (dispersion) forces contribute to interactions of proteins with other molecules or with surfaces, but because of the structural complexity of protein molecules, the magnitude of these effects is usually estimated based on idealized models of the molecular geometry, e.g., spheres or spheroids. The calculations reported here seek to account for both the geometric irregularity of protein molecules and the material properties of the interacting media. Whereas the latter are found to fall in the generally accepted range, the molecular shape is shown to cause the magnitudes of the interactions to differ significantly from those calculated using idealized models, with important consequences. First, the roughness of the molecular surface leads to much lower average interaction energies for both protein-protein and protein-surface cases relative to calculations in which the protein molecule is approximated as a sphere. These results indicate that a form of steric stabilization may be an important effect in protein solutions. Underlying this behavior is appreciable orientational dependence, one reflection of which is that molecules of complementary shape are found to exhibit very strong attractive dispersion interactions. Although this has been widely discussed previously in the context of molecular recognition processes, the broader implications of these phenomena may also be important at larger molecular separations, e.g., in the dynamics of aggregation, precipitation, and crystal growth. Images FIGURE 3 PMID:8789115

  9. Exciting Message from a Dying Monster Star

    NASA Astrophysics Data System (ADS)

    1996-03-01

    this is radiation from a SiO maser in the atmosphere of the star. If it would not have been a maser, it would have been far too weak to have been detected. Although we know several hundred masers of this type in the Milky Way, this is the first discovery of a SiO maser in another galaxy than our own . Since then, the observations have been continued in collaboration with Australian astronomers, using radio telescopes at Parkes and Mopra on that continent. A most unusual star When Swedish astronomer Bengt Westerlund and his colleagues first observed this LMC maser star in 1981 with optical telescopes, they thought that it was a rather normal, cool and not particularly bright star. However, a few years later, the Dutch-British-USA InfraRed Astronomical Satellite (IRAS) revealed its true nature. The IRAS measurements showed that the star radiates most of its light in the form of infrared radiation [4], making it one of the most powerful stars in the LMC; in fact, it emits about half a million times more energy than the Sun. On this occasion, it was given the designation IRAS 04553-6825 , the number indicating its position in the sky. IRAS 04553-6825 is unusual in other ways. It is some fifty times as heavy as our Sun, and it is the biggest known star in the LMC: if it were to take the place of our Sun, it would fill the solar system out to the planet Neptune, thirty times the distance from the Earth to the Sun. It is rather cool when compared to other stars - although it still has a temperature of about 2,000 C - and it therefore has a very red colour [5]. This Press Release is accompanied by ESO Press Photo 15/96 which demonstrates that while the star is hardly visible in blue light, it shines brightly in red and infrared light. Stars like IRAS 04553-6825 are known as red supergiants. It has been unofficially dubbed `The Monster', and having reached the end of a short and hectic life, it is now dying. The nuclear reactions deep inside are undergoing important changes at

  10. Perceptual basis for reactive teleoperation.

    SciTech Connect

    Park, Y. S.; Ewing, T. F.; Boyle, J. M.; Yule, T. J.

    2001-08-28

    To enhance task performance in partially structured environment, enhancement of teleoperation was proposed by introducing autonomous behaviors. Such autonomy is implemented based on reactive robotic architecture, where reactive motor agents that directly couples sensory inputs and motor actions become the building blocks. To this end, presented in this paper is a perceptual basis for the motor agents. The perceptual basis consists of perceptual agents that extracts environmental information from a structured light vision system and provide action oriented perception for the corresponding motor agents. Rather than performing general scene reconstruction, a perceptual agent directly provides the motion reference for the motor behavior. Various sensory mechanisms--sensor fission, fusion, and fashion--becomes basic building blocks of the perception process. Since perception is a process deeply intertwined with the motor actions, active perception may also incorporate motor behaviors as an integral perceptual process.

  11. Authorization basis requirements comparison report

    SciTech Connect

    Brantley, W.M.

    1997-08-18

    The TWRS Authorization Basis (AB) consists of a set of documents identified by TWRS management with the concurrence of DOE-RL. Upon implementation of the TWRS Basis for Interim Operation (BIO) and Technical Safety Requirements (TSRs), the AB list will be revised to include the BIO and TSRs. Some documents that currently form part of the AB will be removed from the list. This SD identifies each - requirement from those documents, and recommends a disposition for each to ensure that necessary requirements are retained when the AB is revised to incorporate the BIO and TSRs. This SD also identifies documents that will remain part of the AB after the BIO and TSRs are implemented. This document does not change the AB, but provides guidance for the preparation of change documentation.

  12. Perceptual basis for reactive teleoperation

    NASA Astrophysics Data System (ADS)

    Park, Young S.; Ewing, Thomas F.; Boyle, James M.; Yule, Thomas J.

    2001-10-01

    To improve task performance in partially structured environments, enhancements to teleoperation have been proposed by introducing autonomous behaviors. Such autonomy is implemented based on a reactive robotic architecture, where reactive motor agents that directly couple sensory inputs and motor actions become the building blocks. To this end, a perceptual basis for the motor agents is presented in this paper. The perceptual basis consists of perceptual agents that extract environmental information from a structured light vision system and provide action-oriented perception for the corresponding motor agents. Rather than performing general scene reconstruction, a perceptual agent directly provides the motion reference for the motor behavior. Various sensory mechanisms - sensor fission, fusion, and fashion - become basic building blocks of the perception process. Since perception is a process deeply intertwined with the motor actions, active perception may also incorporate motor behaviors as an integral perceptual process.

  13. Thermal transport in van der Waals solids from first-principles calculations

    NASA Astrophysics Data System (ADS)

    Lindroth, Daniel O.; Erhart, Paul

    2016-09-01

    The lattice thermal expansion and conductivity in bulk Mo and W-based transition metal dichalcogenides are investigated by means of density functional and Boltzmann transport theory calculations. To this end, a recent van der Waals density functional (vdW-DF-CX) is employed, which is shown to yield excellent agreement with reference data for the structural parameters. The calculated in-plane thermal conductivity compares well with experimental room-temperature values, when phonon-phonon and isotopic scattering are included. To explain the behavior over the entire available temperature range one must, however, include additional (temperature independent) scattering mechanisms that limit the mean free path. Generally, the primary heat carrying modes have mean free paths of 1 μ m or more, which makes these materials very susceptible to structural defects. The conductivity of Mo- and W-based transition metal dichalcogenides is primarily determined by the chalcogenide species and increases in the order Te-Se-S. While for the tellurides and selenides the transition metal element has a negligible effect, the conductivity of WS2 is notably higher than for MoS2, which may be traced to the much larger phonon band gap of the former. Overall, the present study provides a consistent set of thermal conductivities that reveal chemical trends and constitute the basis for future investigations of van der Waals solids.

  14. TCAP Aluminium Dissolution Flowsheet Basis

    SciTech Connect

    PIERCE, ROBERTA.

    2004-03-01

    The Actinide Technology Section has proposed the use of an nitric acid HNO3 and potassium fluoride KF flowsheet for stripping palladium Pd from palladium-coated kieselguhr Pd/K and removing aluminum (Al) metal foam from the TCAP coils. The basis for the HNO3-KF flowsheet is drawn from many sources. A brief review of the sources will be presented. The basic flowsheet involves three process steps, each with its own chemistry.

  15. Hanford Generic Interim Safety Basis

    SciTech Connect

    Lavender, J.C.

    1994-09-09

    The purpose of this document is to identify WHC programs and requirements that are an integral part of the authorization basis for nuclear facilities that are generic to all WHC-managed facilities. The purpose of these programs is to implement the DOE Orders, as WHC becomes contractually obligated to implement them. The Hanford Generic ISB focuses on the institutional controls and safety requirements identified in DOE Order 5480.23, Nuclear Safety Analysis Reports.

  16. Performance Basis for Airborne Separation

    NASA Technical Reports Server (NTRS)

    Wing, David J.

    2008-01-01

    Emerging applications of Airborne Separation Assistance System (ASAS) technologies make possible new and powerful methods in Air Traffic Management (ATM) that may significantly improve the system-level performance of operations in the future ATM system. These applications typically involve the aircraft managing certain components of its Four Dimensional (4D) trajectory within the degrees of freedom defined by a set of operational constraints negotiated with the Air Navigation Service Provider. It is hypothesized that reliable individual performance by many aircraft will translate into higher total system-level performance. To actually realize this improvement, the new capabilities must be attracted to high demand and complexity regions where high ATM performance is critical. Operational approval for use in such environments will require participating aircraft to be certified to rigorous and appropriate performance standards. Currently, no formal basis exists for defining these standards. This paper provides a context for defining the performance basis for 4D-ASAS operations. The trajectory constraints to be met by the aircraft are defined, categorized, and assessed for performance requirements. A proposed extension of the existing Required Navigation Performance (RNP) construct into a dynamic standard (Dynamic RNP) is outlined. Sample data is presented from an ongoing high-fidelity batch simulation series that is characterizing the performance of an advanced 4D-ASAS application. Data of this type will contribute to the evaluation and validation of the proposed performance basis.

  17. Advanced Communication and Control Solutions of Distributed Energy Resources (DER)

    SciTech Connect

    Asgeirsson, Haukur; Seguin, Richard; Sherding, Cameron; de Bruet, Andre, G.; Broadwater, Robert; Dilek, Murat

    2007-01-10

    This report covers work performed in Phase II of a two phase project whose objective was to demonstrate the aggregation of multiple Distributed Energy Resources (DERs) and to offer them into the energy market. The Phase I work (DE-FC36-03CH11161) created an integrated, but distributed, system and procedures to monitor and control multiple DERs from numerous manufacturers connected to the electric distribution system. Procedures were created which protect the distribution network and personnel that may be working on the network. Using the web as the communication medium for control and monitoring of the DERs, the integration of information and security was accomplished through the use of industry standard protocols such as secure SSL,VPN and ICCP. The primary objective of Phase II was to develop the procedures for marketing the power of the Phase I aggregated DERs in the energy market, increase the number of DER units, and implement the marketing procedures (interface with ISOs) for the DER generated power. The team partnered with the Midwest Independent System Operator (MISO), the local ISO, to address the energy market and demonstrate the economic dispatch of DERs in response to market signals. The selection of standards-based communication technologies offers the ability of the system to be deployed and integrated with other utilities’ resources. With the use of a data historian technology to facilitate the aggregation, the developed algorithms and procedures can be verified, audited, and modified. The team has demonstrated monitoring and control of multiple DERs as outlined in phase I report including procedures to perform these operations in a secure and safe manner. In Phase II, additional DER units were added. We also expanded on our phase I work to enhance communication security and to develop the market model of having DERs, both customer and utility owned, participate in the energy market. We are proposing a two-part DER energy market model--a utility

  18. Phagocytosis of dying tumor cells by human peritoneal mesothelial cells.

    PubMed

    Wagner, Britta Janina; Lindau, Dennis; Ripper, Dagmar; Stierhof, York-Dieter; Glatzle, Jörg; Witte, Maria; Beck, Henning; Keppeler, Hildegard; Lauber, Kirsten; Rammensee, Hans-Georg; Königsrainer, Alfred

    2011-05-15

    Peritoneal carcinomatosis is an advanced form of metastatic disease characterized by cancer cell dissemination onto the peritoneum. It is commonly observed in ovarian and colorectal cancers and is associated with poor patient survival. Novel therapies consist of cytoreductive surgery in combination with intraperitoneal chemotherapy, aiming at tumor cell death induction. The resulting dying tumor cells are considered to be eliminated by professional as well as semi-professional phagocytes. In the present study, we have identified a hitherto unknown type of 'amateur' phagocyte in this environment: human peritoneal mesothelial cells (HMCs). We demonstrate that HMCs engulf corpses of dying ovarian and colorectal cancer cells, as well as other types of apoptotic cells. Flow cytometric, confocal and electron microscopical analyses revealed that HMCs ingest dying cell fragments in a dose- and time-dependent manner and the internalized material subsequently traffics into late phagolysosomes. Regarding the mechanisms of prey cell recognition, our results show that HMCs engulf apoptotic corpses in a serum-dependent and -independent fashion and quantitative real-time PCR (qRT-PCR) analyses revealed that diverse opsonin receptor systems orchestrating dying cell clearance are expressed in HMCs at high levels. Our data strongly suggest that HMCs contribute to dying cell removal in the peritoneum, and future studies will elucidate in what manner this influences tumor cell dissemination and the antitumor immune response.

  19. Acceptance of dying: a discourse analysis of palliative care literature.

    PubMed

    Zimmermann, Camilla

    2012-07-01

    The subject of death denial in the West has been examined extensively in the sociological literature. However, there has not been a similar examination of its "opposite", the acceptance of death. In this study, I use the qualitative method of discourse analysis to examine the use of the term "acceptance" of dying in the palliative care literature from 1970 to 2001. A Medline search was performed by combining the text words "accept or acceptance" with the subject headings "terminal care or palliative care or hospice care", and restricting the search to English language articles in clinical journals discussing acceptance of death in adults. The 40 articles were coded and analysed using a critical discourse analysis method. This paper focuses on the theme of acceptance as integral to palliative care, which had subthemes of acceptance as a goal of care, personal acceptance of healthcare workers, and acceptance as a facilitator of care. For patients and families, death acceptance is a goal that they can be helped to attain; for palliative care staff, acceptance of dying is a personal quality that is a precondition for effective practice. Acceptance not only facilitates the dying process for the patient and family, but also renders care easier. The analysis investigates the intertextuality of these themes with each other and with previous texts. From a Foucauldian perspective, I suggest that the discourse on acceptance of dying represents a productive power, which disciplines patients through apparent psychological and spiritual gratification, and encourages participation in a certain way to die.

  20. ["... mein Recht muss mir werden!" Hermann Bahr's tragicomedy Der Querulant (1914)].

    PubMed

    Gaderer, Rupert

    2014-12-01

    At the end of the eighteenth century, people who became notorious for their excessive engagement in legal proceedings started being labeled as "querulents" or "paranoid litigants". The term "querulents" first appeared in the General Order of the Court for the Prussian States (Allgemeine Gerichtsardnung für die Preussischen Staaten) from July 6, 1793. From there on, the spectrum of juridical measures undertaken against the so-labeled litigators included classifying these persons as ineligible for legal action and psychiatric hospitalization. The paper discusses to what extent Hermann Bahr rearranges psychiatric and legal knowledge about this special type of the complainer in his tragi- comedy Der Querulant, premiered in 1914. This concerns, first, the theatricality of the body and speech, secondly, the use of cultural techniques of writing and, thirdly, conflict- ing notions of justice. Therefore, the paper analyzes the aesthetic function of querulous behavior in the dramatic structure of the play from the point of view of both media theory and literary theory.

  1. Van der Waals interaction in uniaxial anisotropic media.

    PubMed

    Kornilovitch, Pavel E

    2013-01-23

    Van der Waals interactions between flat surfaces in uniaxial anisotropic media are investigated in the nonretarded limit. The main focus is the effect of nonzero tilt between the optical axis and the surface normal on the strength of the van der Waals attraction. General expressions for the van der Waals free energy are derived using the surface mode method and the transfer-matrix formalism. To facilitate numerical calculations a temperature-dependent three-band parameterization of the dielectric tensor of the liquid crystal 5CB is developed. A solid slab immersed in a liquid crystal experiences a van der Waals torque that aligns the surface normal relative to the optical axis of the medium. The preferred orientation is different for different materials. Two solid slabs in close proximity experience a van der Waals attraction that is strongest for homeotropic alignment of the intervening liquid crystal for all the materials studied. The results have implications for the stability of plate-like colloids in liquid crystal hosts.

  2. Evolutionary design of interfacial phase change van der Waals heterostructures.

    PubMed

    Kalikka, Janne; Zhou, Xilin; Behera, Jitendra; Nannicini, Giacomo; Simpson, Robert E

    2016-10-27

    We use an evolutionary algorithm to explore the design space of hexagonal Ge2Sb2Te5; a van der Waals layered two dimensional crystal heterostructure. The Ge2Sb2Te5 structure is more complicated than previously thought. Predominant features include layers of Ge3Sb2Te6 and Ge1Sb2Te4 two dimensional crystals that interact through Te-Te van der Waals bonds. Interestingly, (Ge/Sb)-Te-(Ge/Sb)-Te alternation is a common feature for the most stable structures of each generation's evolution. This emergent rule provides an important structural motif that must be included in the design of high performance Sb2Te3-GeTe van der Waals heterostructure superlattices with interfacial atomic switching capability. The structures predicted by the algorithm agree well with experimental measurements on highly oriented, and single crystal Ge2Sb2Te5 samples. By analysing the evolutionary algorithm optimised structures, we show that diffusive atomic switching is probable by Ge atoms undergoing a transition at the van der Waals interface from layers of Ge3Sb2Te6 to Ge1Sb2Te4 thus producing two blocks of Ge2Sb2Te5. Evolutionary methods present an efficient approach to explore the enormous multi-dimensional design parameter space of van der Waals bonded heterostructure superlattices.

  3. Materials perspective on Casimir and van der Waals interactions

    NASA Astrophysics Data System (ADS)

    Woods, L. M.; Dalvit, D. A. R.; Tkatchenko, A.; Rodriguez-Lopez, P.; Rodriguez, A. W.; Podgornik, R.

    2016-10-01

    Interactions induced by electromagnetic fluctuations, such as van der Waals and Casimir forces, are of universal nature present at any length scale between any types of systems. Such interactions are important not only for the fundamental science of materials behavior, but also for the design and improvement of micro- and nanostructured devices. In the past decade, many new materials have become available, which has stimulated the need for understanding their dispersive interactions. The field of van der Waals and Casimir forces has experienced an impetus in terms of developing novel theoretical and computational methods to provide new insights into related phenomena. The understanding of such forces has far reaching consequences as it bridges concepts in materials, atomic and molecular physics, condensed-matter physics, high-energy physics, chemistry, and biology. This review summarizes major breakthroughs and emphasizes the common origin of van der Waals and Casimir interactions. Progress related to novel ab initio modeling approaches and their application in various systems, interactions in materials with Dirac-like spectra, force manipulations through nontrivial boundary conditions, and applications of van der Waals forces in organic and biological matter are examined. The outlook of the review is to give the scientific community a materials perspective of van der Waals and Casimir phenomena and stimulate the development of experimental techniques and applications.

  4. The development of two dimensional group IV chalcogenides, blocks for van der Waals heterostructures

    NASA Astrophysics Data System (ADS)

    Sa, Baisheng; Sun, Zhimei; Wu, Bo

    2015-12-01

    In this work, we introduce a series of two dimensional (2D) group IV chalcogenides (AX)2 with the building block X-A-A-X (A = Si, Ge, Sn, and Pb, and X = Se and Te) on the basis of ab initio calculations. The analysis of energy evaluation, lattice vibration as well as the chemical bonding demonstrate the good stability of these 2D materials. Furthermore, the pictures for the chemical bonding and electronic features of the 2D (AX)2 are drawn. Their narrow gapped semiconducting nature is unraveled. Especially, strong interactions between the electrons and phonons as well as the topological insulating nature in (SiTe)2 are observed. The present results indicate that such remarkable artificial 2D (AX)2 are building blocks for van der Waals heterostructure engineering, which shows potential applications in nanoscaled electronics and optoelectronics.

  5. Comparative dielectric studies on two hydrogen-bonded and van der Waals liquids

    NASA Astrophysics Data System (ADS)

    Kaminski, K.; Wlodarczyk, P.; Hawelek, L.; Adrjanowicz, K.; Wojnarowska, Z.; Paluch, M.; Kaminska, E.

    2011-06-01

    Broadband dielectric measurements were performed in a wide range of temperatures on glucose, maltose, and their acetyl derivatives. We have indicated that molecular dynamics above and below the glass transition temperature differ considerably for the hydrogen-bonded and van der Waals systems. We have shown that structural relaxation dispersions of D-glucose and maltose are broader than those obtained for peracetyl carbohydrates. Moreover, glass transition temperatures of the former systems are much higher than for the latter ones. In the glassy state of both glucose and its acetyl derivatives only one well-separated secondary relaxation process was identified. In the case of maltose and peracetyl maltose a completely different situation was observed. In the former carbohydrate two secondary modes were detected, whereas in the latter one only a faster relaxation process was visible in the glassy state. This finding is discussed in greater detail on the basis of density functional theory calculations.

  6. 9 CFR 325.20 - Transportation and other transactions concerning dead, dying, disabled, or diseased livestock...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died... other transactions concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of... transporting in commerce, or importing any dead, dying, disabled or diseased animals or parts of the...

  7. 9 CFR 325.20 - Transportation and other transactions concerning dead, dying, disabled, or diseased livestock...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died... other transactions concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of... transporting in commerce, or importing any dead, dying, disabled or diseased animals or parts of the...

  8. 9 CFR 325.20 - Transportation and other transactions concerning dead, dying, disabled, or diseased livestock...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of livestock that died... other transactions concerning dead, dying, disabled, or diseased livestock, and parts of carcasses of... transporting in commerce, or importing any dead, dying, disabled or diseased animals or parts of the...

  9. Is "healthy dying" a paradox? revisiting an early Kastenbaum challenge.

    PubMed

    Kellehear, Allan

    This article is a review of Robert Kastenbaum's 1979 essay entitled "Healthy dying: A paradoxical quest continues." It begins with a summary of the arguments and challenges in the original essay. This is followed by an evaluation of his original claims in the light of contemporary insights in modern public health history and empirical studies of near-death experiences and death bed visions. The recent development of health promotion in palliative care is described in relation to these developments and Kastenbaum's early question about the paradoxical quest for health while dying is again posed against this background. Given our modern understanding of "health" in current global health policy and debates, it is argued that "healthy dying" is no paradox. Instead, the pursuit of health at the end of life represents a realistic modern desire to compress morbidity, minimize unnecessary suffering, and enhance quality of life at this time.

  10. Phenomenological study of ICU nurses' experiences caring for dying patients.

    PubMed

    King, Phyllis Ann; Thomas, Sandra P

    2013-11-01

    This existential phenomenological study explored caring for the dying based on the philosophical works of Merleau-Ponty. Fourteen critical care nurses were asked to describe lived experiences of caring for dying patients. An encompassing theme of Promises to Keep emerged, with five subthemes, including the following: (a) promise to be truthful: "Nurses are in the game of reality," (b) promise to provide comfort: "I'll make him comfortable," (c) promise to be an advocate: "Just one more day," (d) "Promise that couldn't be kept," and (e) "Promise to remain connected." The essence of intensive care nurses' lived experience of caring for dying patients is captured in the theme Promises to Keep. Nurses accept the reality of death and express strong commitment to making it as comfortable, peaceful, and dignified as possible, despite critical care unit environments that foster a "paradigm of curing" rather than a "paradigm of caring.".

  11. Optimization of an Extrusion Die for Polymer Flow

    NASA Astrophysics Data System (ADS)

    Ridene, Y. Chahbani; Graebling, D.; Boujelbene, M.

    2011-01-01

    In this work, we used the CFD software PolyFlow to optimize the extrusion process of polystyrene flow. In this process, the flow of the molten polymer through the die can be viewed as a critical step for the material in terms of shear rate, self heating by viscous dissipation and temperature reached. The simulation is focused on the flow and heat transfer in the die to obtain a uniform velocity profile and a uniform temperature profile. The rheological behavior of polymer melt was described by the nonlinear Giesekus model. The dependence of the viscosity has also to be taken into account for a correct description of the flow. The design of the die has been validated by our numerical simulation.

  12. Death and dying anxiety among elderly Arab Muslims in Israel.

    PubMed

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Gigini, Ibrahim

    2010-04-01

    Death and dying anxiety were examined among elderly Arab Muslims in Israel. A total of 145 people aged 60 and over were interviewed using a standardized questionnaire. Nursing home residents reported higher death anxiety than others; women and uneducated participants reported greater levels of fear of death and dying than others. There were no differences based on religiosity. Death anxiety was related to gender and education for elderly living in the community, but social support and self-esteem were additional correlates for those living in nursing homes. The results of this study indicate that fostering a sense that one has a supportive social and familial network is important in decreasing death and dying anxiety among elderly Arab people. It would also be beneficial to provide information and knowledge that might relieve some of the anxiety they experience.

  13. Hospice nurses’ emotional challenges in their encounters with the dying

    PubMed Central

    Ingebretsen, Lina Paola; Sagbakken, Mette

    2016-01-01

    The purpose of this study was to explore nurses’ emotional challenges when caring for the dying in hospices. The study has a qualitative design, and knowledge was developed through a dialectical exchange between theory and data. Ten individual in-depth interviews were conducted with nurses recruited from two hospices in Denmark. Although all of the nurses said that they experienced emotional challenges or felt emotionally touched during their work, the study found a variety of opinions related to the extent to which their emotional reactions should be revealed in their role as a hospice professional. The participants described their emotional challenges as being simultaneously draining and enriching experiences leading to personal and professional growth and development. The study may contribute to increased awareness of emotional challenges for hospice nurses, which involve continuous reflection and balancing between meeting the dying as a human being and meeting the dying as a hospice professional. PMID:27258584

  14. Campus Single Sign-On und hochschulübergreifendes Identity Management

    NASA Astrophysics Data System (ADS)

    Hommel, Wolfgang

    Das im Rahmen von IntegraTUM für die TUM geschaffene Identity & Access Management System setzt das Paradigma unified login um, d. h. ein Benutzer kann alle für ihn relevanten Dienste innerhalb der Hochschule mit derselben Loginname-/Passwortkombination nutzen. Dieser Artikel zeigt, wie auf Basis der Software Shibboleth und der deutschlandweiten Hochschulföderation DFN-AAI als weitere Mehrwerte das campusweite web single sign-on und die nahtlose Nutzung zahlreicher externer Web-Anwendungen erreicht werden. Als Beispiel für die Abläufe bei der Erschließung neuer Dienste für die hochschulübergreifende Nutzung wird die Anbindung von Learning Management Systemen auf Basis des DFN-AAI E-Learning-Profils diskutiert. Den umfassenden Vorteilen werden schließlich die aktuellen technischen Grenzen bei der Umsetzung des hochschulübergreifenden Identity Management gegenübergestellt.

  15. A cartography of the van der Waals territories.

    PubMed

    Alvarez, Santiago

    2013-06-28

    The distribution of distances from atoms of a particular element E to a probe atom X (oxygen in most cases), both bonded and intermolecular non-bonded contacts, has been analyzed. In general, the distribution is characterized by a maximum at short E···X distances corresponding to chemical bonds, followed by a range of unpopulated distances--the van der Waals gap--and a second maximum at longer distances--the van der Waals peak--superimposed on a random distribution function that roughly follows a d(3) dependence. The analysis of more than five million interatomic "non-bonded" distances has led to the proposal of a consistent set of van der Waals radii for most naturally occurring elements, and its applicability to other element pairs has been tested for a set of more than three million data, all of them compared to over one million bond distances.

  16. The case for a sociology of dying, death, and bereavement.

    PubMed

    Thompson, Neil; Allan, June; Carverhill, Philip A; Cox, Gerry R; Davies, Betty; Doka, Kenneth; Granek, Leeat; Harris, Darcy; Ho, Andy; Klass, Dennis; Small, Neil; Wittkowski, Joachim

    2016-01-01

    Dying, death, and bereavement do not occur in a social vacuum. How individuals and groups experience these phenomena will be largely influenced by the social context in which they occur. To develop an adequate understanding of dying, death, and bereavement we therefore need to incorporate a sociological perspective into our analysis. This article examines why a sociological perspective is necessary and explores various ways in which sociology can be of practical value in both intellectual and professional contexts. A case study comparing psychological and sociological perspectives is offered by way of illustration.

  17. Do people whose names begin with "D" really die young?

    PubMed

    Smith, Gary

    2012-02-01

    It has been reported that professional baseball players whose first names begin with the letter "D" tend to die relatively young (E. L. Abel & M. L. Kruger, 2010). However, the statistical evidence for this claim is based on selective data and a statistical test that ignores important confounding influences. A valid test applied to more comprehensive data from the same source does not show a statistically significant relationship between initials and longevity. In addition, data for the years 1960 through 2004 for 6.7 million White, non-Hispanic California decedents do not replicate the claim that D's die young.

  18. A Basis for Evoked Potential Assessment of Certain Visual Functions.

    DTIC Science & Technology

    1981-06-30

    evoked potentials. 1982, in preparation. (4) Tweel , L.H. van der, Regan, D. & Spekreijse, H. Some aspects of poten- tials evoked by changes in spatial...brightness contrast. 7th ISCERG Symp., Istanbul (1969), pub. by Univ. of Istanbul (1971), pp. 1-11. (5) Spekreijse, H., van der Tweel , L.H. & Regan, D...ponIses to pattern reversal. References (8) Tweel , L.11. van der & Spekreijse, H. Signal transport and rectifica- tion in the human evoked response

  19. Terminology for interprofessional collaboration: definition and current practice.

    PubMed

    Mahler, Cornelia; Gutmann, Thomas; Karstens, Sven; Joos, Stefanie

    2014-01-01

    Hintergrund: Interprofessionelle Zusammenarbeit führt zu einer verbesserten Gesundheitsversorgung. Die Forderung nach interprofessioneller Zusammenarbeit geht einher mit nationalen und internationalen Empfehlungen für interprofessionelles Lernen und Ausbildungssequenzen. Die GMA nimmt sich dieser nationalen und internationalen Herausforderungen an und hat den Ausschuss „Interprofessionelle Ausbildung in den Gesundheitsberufen“ ins Leben gerufen, um dieser neuen Entwicklung Nachdruck zu verleihen und konkrete Empfehlungen zu entwickeln. Die Verwendung von Begrifflichkeiten zur Zusammenarbeit der Gesundheitsberufe scheint dabei vielgestaltig und wenig abgestimmt zu sein. Ziel des Beitrags ist die Klärung unterschiedlich verwendeter Begriffe im Bereich der Zusammenarbeit der Gesundheitsberufe und die Analyse der verwendeten Begriffe in deutschen Fachzeitschriften. Methodik: Häufig verwendete Begriffe zur Zusammenarbeit der Gesundheitsberufe wurden identifiziert und anschließend eine nicht systematische Analyse deutschsprachiger medizinischen Fachzeitschriften, zur Verwendung der Begrifflichkeiten „interprof*“ und „interdiszip*“ durchgeführt.Ergebnisse: Die Begriffe „interprofessionell“ und „interdisziplinär“ wurden in den begutachteten Fachzeitschriften uneinheitlich und zum Teil synonym verwendet. Schlussfolgerung: Derzeit werden Begrifflichkeiten zur Zusammenarbeit der Gesundheitsberufe wenig abgestimmt genutzt und zum Teil beliebig verwendet. Die Begriffe „professionell“ und „disziplinär“ werden aus Sicht der Medizin und der Sozialwissenschaften unterschiedlich verwendet. Als Basis für eine erfolgreiche Weiterentwicklung der Zusammenarbeit innerhalb der Gesundheitsberufe und für ein besseres Verständnis füreinander sollte die Terminologie einheitlich verwendet werden.

  20. The Economics of van der Waals Force Engineering

    NASA Astrophysics Data System (ADS)

    Pinto, Fabrizio

    2008-01-01

    As micro-electro-mechanical system (MEMS) fabrication continues on an ever-decreasing scale, new technological challenges must be successfully negotiated if Moore's Law is to be an even approximately valid model of the future of device miniaturization. Among the most significant obstacles is the existence of strong surface forces related to quantum mechanical van der Waals interatomic interactions, which rapidly diverge as the distance between any two neutral boundaries decreases. The van der Waals force is a contributing factor in several device failures and limitations, including, for instance, stiction and oscillator non-linearities. In the last decade, however, it has been conclusively shown that van der Waals forces are not just a MEMS limitation but can be engineered in both magnitude and sign so as to enable classes of proprietary inventions which either deliver novel capabilities or improve upon existing ones. The evolution of van der Waals force research from an almost exclusively theoretical field in quantum-electro-dynamics to an enabling nanotechnology discipline represents a useful example of the ongoing paradigm shift from government-centered to private-capital funded R&D in cutting-edge physics leading to potentially profitable products. In this paper, we discuss the reasons van der Waals force engineering may lead to the creation of thriving markets both in the short and medium terms by highlighting technical challenges that can be competitively addressed by this novel approach. We also discuss some notable obstacles to the cultural transformation of the academic research community required for the emergence of a functional van der Waals force engineering industry worldwide.

  1. Pultrusion dies -- From massive and power hungry to lean and smart

    SciTech Connect

    Awa, T.W.; Price, H.L.

    1996-11-01

    A lean and smart pultrusion die is proposed. The concept arose from a thermal analysis which showed that present dies involve large heat losses balancing large power inputs with temperature excursions being damped by high die mass. As power costs increase and control costs decrease, pultrusion dies may evolve toward low mass, highly insulated dies with a computer for monitoring and control purposes as well as for heat transfer estimates.

  2. 14 CFR 400.1 - Basis.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Basis. 400.1 Section 400.1 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL BASIS AND SCOPE § 400.1 Basis. The basis for the regulations in this chapter is the...

  3. 14 CFR 400.1 - Basis.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Basis. 400.1 Section 400.1 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL BASIS AND SCOPE § 400.1 Basis. The basis for the regulations in this chapter is the...

  4. 14 CFR 400.1 - Basis.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Basis. 400.1 Section 400.1 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL BASIS AND SCOPE § 400.1 Basis. The basis for the regulations in this chapter is the...

  5. 14 CFR 400.1 - Basis.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Basis. 400.1 Section 400.1 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL BASIS AND SCOPE § 400.1 Basis. The basis for the regulations in this chapter is the...

  6. 14 CFR 400.1 - Basis.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Basis. 400.1 Section 400.1 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GENERAL BASIS AND SCOPE § 400.1 Basis. The basis for the regulations in this chapter is the...

  7. 10 CFR 830.202 - Safety basis.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Safety basis. 830.202 Section 830.202 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.202 Safety basis. (a) The contractor... in the safety basis any changes, conditions, or hazard controls directed by DOE....

  8. 10 CFR 830.202 - Safety basis.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Safety basis. 830.202 Section 830.202 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.202 Safety basis. (a) The contractor... in the safety basis any changes, conditions, or hazard controls directed by DOE....

  9. 10 CFR 830.202 - Safety basis.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Safety basis. 830.202 Section 830.202 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.202 Safety basis. (a) The contractor... in the safety basis any changes, conditions, or hazard controls directed by DOE....

  10. 10 CFR 830.202 - Safety basis.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Safety basis. 830.202 Section 830.202 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.202 Safety basis. (a) The contractor... in the safety basis any changes, conditions, or hazard controls directed by DOE....

  11. Curves of growth for van der Waals broadened spectral lines

    NASA Technical Reports Server (NTRS)

    Park, C.

    1980-01-01

    Curves of growth are evaluated for a spectral line broadened by the van der Waals interactions during collisions. The growth of the equivalent widths of such lines is shown to be dependent on the product of the perturber density and the 6/10 power of the van der Waals potential coefficient. When the parameter is small, the widths grow as the 1/2 power of the optical depth as they do for the Voigt profile: but when the parameter is large, they grow as 2/3 power and, hence, faster than the Voigt profile. An approximate analytical expression for the computed growth characteristics is given.

  12. Internal dosimetry technical basis manual

    SciTech Connect

    Not Available

    1990-12-20

    The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.

  13. Experimental Damage Criterion for Static and Fatigue Life Assessment of Commercial Aluminum Alloy Die Castings

    NASA Astrophysics Data System (ADS)

    Battaglia, Eleonora; Bonollo, Franco; Ferro, Paolo

    2017-03-01

    Defects, particularly porosity and oxides, in high-pressure die casting can seriously compromise the in-service behavior and durability of products subjected to static or cyclic loadings. In this study, the influence of dimension, orientation, and position of casting defects on the mechanical properties of an AlSi12(b) (EN-AC 44100) aluminum alloy commercial component has been studied. A finite element model has been carried out in order to calculate the stress distribution induced by service loads and identify the crack initiation zones. Castings were qualitatively classified on the basis of porosities distribution detected by X-ray technique and oxides observed on fracture surfaces of specimens coming from fatigue and tensile tests. A damage criterion has been formulated which considers the influence of defects position and orientation on the mechanical strength of the components. Using the proposed damage criterion, it was possible to describe the mechanical behavior of the castings with good accuracy.

  14. Barriers to Quality Care for Dying Patients in Rural Communities

    ERIC Educational Resources Information Center

    Van Vorst, Rebecca F.; Crane, Lori A.; Barton, Phoebe Lindsey; Kutner, Jean S.; Kallail, K. James; Westfall, John M.

    2006-01-01

    Context: Barriers to providing optimal palliative care in rural communities are not well understood. Purpose: To identify health care personnel's perceptions of the care provided to dying patients in rural Kansas and Colorado and to identify barriers to providing optimal care. Methods: An anonymous self-administered survey was sent to health care…

  15. Consumer Aspects of Death and Dying. The Forgotten Dimension.

    ERIC Educational Resources Information Center

    Eddy, James M.; And Others

    1980-01-01

    The consumer aspects of death and dying are discussed as part of a comprehensive death education program. Suggested areas to be covered include traditional funeral procedures and costs; alternatives including cremation, body donation, and funeral and memorial societies; and drawing up a will. Some suggested teaching strategies are outlined. (JMF)

  16. Learning To Say Goodbye: Dealing with Death and Dying.

    ERIC Educational Resources Information Center

    Peck, Rosalie; Stefanics, Charlotte

    This book is intended to help the counselor learn to work with terminal patients. The first part presents historical and cultural attitudes toward death and dying. Fear of death, the role of religion, and common myths about terminal cancer patients are discussed. The second part deals with care and treatment of terminal patients. The significance…

  17. Attitudes of Dental and Medical Students toward Death and Dying.

    ERIC Educational Resources Information Center

    Sundin, Robert H.; And Others

    1979-01-01

    Explores attitudes of dental and medical students toward death and dying. Attitudes toward death influencing choice between dental school and medical school are latent. Attitudes of dental and medical students toward death may be differentially affected by their professional experiences. (Author/BEF)

  18. Technological Change in Michigan's Tool and Die Industry.

    ERIC Educational Resources Information Center

    Smith, Donald N.

    This study was conducted to answer four questions about the tool and die industry in Michigan. These were: (1) What are the current production techniques? (2) To what extent are these industrialists aware of new technologies? (3) What technical and economic factors affect technological change? and (4) To what extent will new technologies replace…

  19. View west of small tooling and forging dies in Blacksmith ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View west of small tooling and forging dies in Blacksmith Shop, Boilermakers Department, east side of building 57; during World War II approximately forty women were employed as blacksmith's forging a variety of small tools; these may be the tools they used. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

  20. Preventive Therapy with Siblings of a Dying Child.

    ERIC Educational Resources Information Center

    Feinberg, Daniel

    A case study of psychiatric intervention for two sisters whose brother is dying of leukemia is presented. The therapeutic technique attempted to deal with the threatened loss by a forthright approach to the reality situation, encouraging "immunizing" discussions, allowance for catharsis without severe regression, emphasis on reality orientation,…

  1. Media constructions of dying alone: a form of 'bad death'.

    PubMed

    Seale, Clive

    2004-03-01

    In this study, newspaper accounts of people who die alone are analysed, drawing on a sample of 90 articles in the anglophone press that appeared in October 1999. Dying alone is represented as a fearful fate and a moral affair, often being the outcome of an undesirable personal character, either of the deceased or of onlookers, or involving the failings of society at large. It is frequently portrayed as occurring to people who are either geographically or socially distant from 'home', so that an imagined community of readers is encouraged to contemplate a death alone as the consequence of personal or societal breakdown. A degree of stigmatisation, sometimes of those who die alone, sometimes of those perceived to have caused this event, was evident. The negative evaluation of death alone parallels that found in some traditional societies where a death far from home is considered 'bad'. Dying alone contrasts significantly with the sociable, 'good', confessional deaths of newspaper columnists and other media celebrities facing terminal illness.

  2. Death and Dying as a Controversial Issue in Health Education.

    ERIC Educational Resources Information Center

    Russell, Robert D.; And Others

    1982-01-01

    Various perspectives on the inclusion of death education in health education curricula are offered. Discussed are: (1) positive and negative attitudes toward death; (2) teacher competence, qualifications, and skills; (3) religious beliefs about death; (4) Kubler-Ross's Five Stages of Dying; and (5) political implications of teaching about death.…

  3. Dying with Dementia in Long-Term Care

    ERIC Educational Resources Information Center

    Sloane, Philip D.; Zimmerman, Sheryl; Williams, Christianna S.; Hanson, Laura C.

    2008-01-01

    Purpose: To better understand the experiences and potential unmet need of persons who die in long-term care. Design and Methods: We conducted after-death interviews with staff who had cared for 422 decedents with dementia and 159 who were cognitively intact and received terminal care in U.S. nursing homes (NHs) or residential care-assisted living…

  4. Do People Whose Names Begin with "D" Really Die Young?

    ERIC Educational Resources Information Center

    Smith, Gary

    2012-01-01

    It has been reported that professional baseball players whose first names begin with the letter "D" tend to die relatively young (E. L. Abel & M. L. Kruger, 2010). However, the statistical evidence for this claim is based on selective data and a statistical test that ignores important confounding influences. A valid test applied to…

  5. Where a Cancer Patient Dies: The Effect of Rural Residency

    ERIC Educational Resources Information Center

    Burge, Frederick I.; Lawson, Beverley; Johnston, Grace

    2005-01-01

    Context: Surveys indicate 50% to 80% of cancer patients would choose to die at home if possible, although far fewer actually do. In Nova Scotia (NS), cancer deaths occurring out-of-hospital increased from 19.8% in 1992 to 30.2% in 1997. The impact of rural residency on this trend has not been studied. Purpose: To determine the association between…

  6. A Simulation Based on Goldratt's Matchstick/Die Game

    ERIC Educational Resources Information Center

    Martin, Clarence H.

    2007-01-01

    This teaching brief presents a Microsoft® Excel simulation designed to complement and expand upon the well-known matchstick/die game introduced by Goldratt in "The Goal." This simulation performs 100 replications of a 40-period processing run for low, medium, and high levels of process variation and displays the comparative results…

  7. Understandings of Death and Dying for People of Chinese Origin

    ERIC Educational Resources Information Center

    Hsu, Chiung-Yin; O'Connor, Margaret; Lee, Susan

    2009-01-01

    This article introduces the primary beliefs about ancestor worship, Taoism, Confucianism, Buddhism and traditional Chinese medicine that have influenced Chinese people for thousands of years, particularly in relation to death and dying. These cultures and traditions remain important for Chinese people wherever they live. Over a long period,…

  8. Dreams of the Dying Patient: An Exploration of Content.

    ERIC Educational Resources Information Center

    Prince, Pamela N.; Hoffmann, Robert F.

    1991-01-01

    Examined 25 dream reports of individuals in Palliative Care Unit. Content analysis of dream reports supports hypothesis that continuity exists between dreaming and waking experience. Results did not indicate that themes of death and aggression, negative emotion, or infant and child characters were more prevalent among the dying. (Author/NB)

  9. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF... owned by the Indian Arts and Crafts Board....

  10. A Framework for Ethical Decision-Making with Dying Patients.

    ERIC Educational Resources Information Center

    Lafer, Barbara H.; Lee, Sandra S.

    The field of death and dying has become an important area for the development of both research and clinical technique. Psychologists in increasing numbers work in hospital and hospice settings, and therapists treat terminally ill patients and/or their families. Greater attention is being paid to the needs and rights of these patients and families,…

  11. A Membrane Process for Recycling Die Lube from Wastewater Solutions

    SciTech Connect

    Eric S. Peterson; Jessica Trudeau; Bill Cleary; Michael Hackett; William A. Greene

    2003-04-01

    An active-surface membrane technology was used to separate a die lube manufacturing wastewater stream consisting of various oils, hydrocarbons, heavy metals, and silicones. The ultrafiltration membranes reduced organics from initial oil and grease contents by 20–25X, carbon oxygen demand (COD) by 1.5 to 2X, and total organic carbon (TOC) by 0.6, while the biological oxygen demand (BOD) remained constant. The active-surface membranes were not fouled as badly as non-active-surface systems and the active-surface membrane flux levels were consistently higher and more stable than those of the non-active-surface membranes tested. Field testing demonstrated that the rotary microfilter can concentrate the die lube, i.e. remove the glycerin component, and produce a die lube suitable for recycling. The recycling system operated for six weeks with only seven cleaning cycles and no mechanical or electrical failures. Test data and quality records indicate that the die casting scrap was reduced from 8.4 to 7.8%. There is no doubt that this test yielded tremendous results. This separation process presents significant opportunities that can be evaluated further.

  12. A Membrane Process for Recycling Die Lube from Wastewater Solutions

    SciTech Connect

    Peterson, E. S.; Trudeau, J.; Cleary, B.; Hackett, M.; Greene, W. A.

    2003-04-30

    An active-surface membrane technology was used to separate a die lube manufacturing wastewater stream consisting of various oils, hydrocarbons, heavy metals, and silicones. The ultrafiltration membranes reduced organics from initial oil and grease contents by 20-25X, carbon oxygen demand (COD) by 1.5 to 2X, and total organic carbon (TOC) by 0.6, while the biological oxygen demand (BOD) remained constant. The active-surface membranes were not fouled as badly as non-active-surface systems and the active-surface membrane flux levels were consistently higher and more stable than those of the non-active-surface membranes tested. Field testing demonstrated that the rotary microfilter can concentrate the die lube, i.e. remove the glycerin component, and produce a die lube suitable for recycling. The recycling system operated for six weeks with only seven cleaning cycles and no mechanical or electrical failures. Test data and quality records indicate that the die casting scrap was reduced from 8.4 to 7.8%. There is no doubt that this test yielded tremendous results. This separation process presents significant opportunities that can be evaluated further.

  13. Dying and death in some Roma communities: ethical challenges.

    PubMed

    Roman, Gabriel; Gramma, Rodica; Enache, Angela; Pârvu, Andrada; Ioan, Beatrice; Moisa, Ştefana Maria; Dumitraş, Silvia; Chirita, Radu

    2014-04-01

    The Roma people have specific values, therefore their views and beliefs about illness, dying and death are important to be known for health care providers caring for members of this community. The aim of this qualitative study based on 48 semi-structured interviews with Roma patients and caregivers in communities in two regions of Romania was to examine their selfdescribed behaviors and practices, their experiences and perceptions of illness, dying and death. Five more important themes about the Roma people facing dying and death have been identified: (1) The perception of illness in the community as reason for shame and the isolation that results from this, as well as the tendency for Roma people to take this on in their self image; (2) The importance of the family as the major support for the ill/dying individual, including the social requirement that family gather when someone is ill/dying; (3) The belief that the patient should not be told his/her diagnosis for fear it will harm him/her and that the family should be informed of the diagnosis as the main decision maker regarding medical treatment; (4) The reluctance of the Roma to decide on stopping life prolonging treatment; (5) The view of death as 'impure'. These results can be useful for health care providers working with members of the Roma community. By paying attention to and respecting the Roma patients' values, spirituality, and relationship dynamics, the medical staff can provide the most suitable healthcare by respecting the patients' wishes and expectations.

  14. Molecular Basis of the Apparent Near Ideality of Urea Solutions

    PubMed Central

    Kokubo, Hironori; Rösgen, Jörg; Bolen, D. Wayne; Pettitt, B. Montgomery

    2007-01-01

    Activity coefficients of urea solutions are calculated to explore the mechanism of its solution properties, which form the basis for its well-known use as a strong protein denaturant. We perform free energy simulations of urea solutions in different urea concentrations using two urea models (OPLS and KBFF models) to calculate and decompose the activity coefficients. For the case of urea, we clarify the concept of the ideal solution in different concentration scales and standard states and its effect on our subsequent analysis. The analytical form of activity coefficients depends on the concentration units and standard states. For both models studied, urea displays a weak concentration dependence for excess chemical potential. However, for the OPLS force-field model, this results from contributions that are independent of concentration to the van der Waals and electrostatic components whereas for the KBFF model those components are nontrivial but oppose each other. The strong ideality of urea solutions in some concentration scales (incidentally implying a lack of water perturbation) is discussed in terms of recent data and ideas on the mechanism of urea denaturation of proteins. PMID:17693466

  15. Molecular Basis of the Apparent Near Ideality of Urea Solutions.

    SciTech Connect

    Kokubo, Hironori; Rosgen, Jorg; Bolen, D Wayne; Pettitt, Bernard M.

    2007-11-01

    The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. Activity coefficients of urea solutions are calculated to explore the mechanism of its solution properties, which form the basis for its well-known use as a strong protein denaturant. We perform free energy simulations of urea solutions in different urea concentrations using two urea models (OPLS and KBFF models) to calculate and decompose the activity coefficients. For the case of urea, we clarify the concept of the ideal solution in different concentration scales and standard states and its effect on our subsequent analysis. The analytical form of activity coefficients depends on the concentration units and standard states. For both models studied, urea displays a weak concentration dependence for excess chemical potential. However, for the OPLS force-field model, this results from contributions that are independent of concentration to the van der Waals and electrostatic components whereas for the KBFF model those components are nontrivial but oppose each other. The strong ideality of urea solutions in some concentration scales (incidentally implying a lack of water perturbation) is discussed in terms of recent data and ideas on the mechanism of urea denaturation of proteins.

  16. Molecular Basis of Ligand Dissociation in β-Adrenergic Receptors

    PubMed Central

    González, Angel; Perez-Acle, Tomas; Pardo, Leonardo; Deupi, Xavier

    2011-01-01

    The important and diverse biological functions of β-adrenergic receptors (βARs) have promoted the search for compounds to stimulate or inhibit their activity. In this regard, unraveling the molecular basis of ligand binding/unbinding events is essential to understand the pharmacological properties of these G protein-coupled receptors. In this study, we use the steered molecular dynamics simulation method to describe, in atomic detail, the unbinding process of two inverse agonists, which have been recently co-crystallized with β1 and β2ARs subtypes, along four different channels. Our results indicate that this type of compounds likely accesses the orthosteric binding site of βARs from the extracellular water environment. Importantly, reconstruction of forces and energies from the simulations of the dissociation process suggests, for the first time, the presence of secondary binding sites located in the extracellular loops 2 and 3 and transmembrane helix 7, where ligands are transiently retained by electrostatic and Van der Waals interactions. Comparison of the residues that form these new transient allosteric binding sites in both βARs subtypes reveals the importance of non-conserved electrostatic interactions as well as conserved aromatic contacts in the early steps of the binding process. PMID:21915263

  17. Converging Nuclear Magnetic Shielding Calculations with Respect to Basis and System Size in Protein Systems

    PubMed Central

    Hartman, Joshua D.; Neubauer, Thomas J.; Caulkins, Bethany G.; Mueller, Leonard J.; Beran, Gregory J. O.

    2015-01-01

    Ab initio chemical shielding calculations greatly facilitate the interpretation of nuclear magnetic resonance (NMR) chemical shifts in biological systems, but the large sizes of these systems requires approximations in the chemical models used to represent them. Achieving good convergence in the predicted chemical shieldings is necessary before one can unravel how other complex structural and dynamical factors affect the NMR measurements. Here, we investigate how to balance trade-offs between using a better basis set or a larger cluster model for predicting the chemical shieldings of the substrates in two representative examples of protein-substrate systems involving different domains in tryptophan synthase: the N-(4′-trifluoromethoxybenzoyl)-2-aminoethyl phosphate (F9) ligand which binds in the α active site, and the 2-aminophenol (2AP) quinonoid intermediate formed in the β active site. We first demonstrate that a chemically intuitive three-layer, locally dense basis model that uses a large basis on the substrate, a medium triple-zeta basis to describe its hydrogen-bonding partners and/or surrounding van derWaals cavity, and a crude basis set for more distant atoms provides chemical shieldings in good agreement with much more expensive large basis calculations. Second, long-range quantum mechanical interactions are important, and one can accurately estimate them as a small-basis correction to larger-basis calculations on a smaller cluster. The combination of these approaches enables one to perform density functional theory NMR chemical shift calculations in protein systems that are well-converged with respect to both basis set and cluster size. PMID:25993979

  18. Van der Waals forces in pNRQED

    SciTech Connect

    Shtabovenko, Vladyslav

    2016-01-22

    We report on the calculation of electromagnetic van der Waals forces [1] between two hydrogen atoms using non-relativistic effective field theories (EFTs) of QED for large and small momentum transfers with respect to the intrinsic energy scale of the hydrogen atom. Our results reproduce the well known London and Casimir-Polder forces.

  19. Nonadiabatic corrections to the van der Waals potential

    NASA Technical Reports Server (NTRS)

    Au, C. K.

    1988-01-01

    Closed-form expressions are derived for the finite-mass nonadiabatic corrections to the van der Waals potential in the electric-dipole approximations in terms of London-analog two-center atomic spectral sums. The nonadiabatic corrections to all orders at threshold energy and also those with first-order energy dependence are given.

  20. Excited nucleon as a van der Waals system of partons

    SciTech Connect

    Jenkovszky, L. L.; Muskeyev, A. O. Yezhov, S. N.

    2012-06-15

    Saturation in deep inelastic scattering (DIS) and deeply virtual Compton scattering (DVCS) is associated with a phase transition between the partonic gas, typical of moderate x and Q{sup 2}, and partonic fluid appearing at increasing Q{sup 2} and decreasing Bjorken x. We suggest the van der Waals equation of state to describe properly this phase transition.