Science.gov

Sample records for die bedeutung von

  1. Fehler begehen - Mathematik verstehen Über die Bedeutung von Fehlern für das Verstehen

    NASA Astrophysics Data System (ADS)

    Käser, Udo

    Auch wenn eine historisch oder systematisch umfassende Darstellung zur Fehlerthematik bislang nicht vorliegt, ist die Idee, einer Fehleranalyse unter der Leitfrage, welche Fehler von Schülerinnen und Schülern aufgrund welcher epistemologischen Überzeugungen begangen werden, zentralen Raum für die Betrachtung von Verstehensprozessen einzuräumen, nicht neu. So ist es geradezu ein Charakteristikum einer modernen konstruktivistischen Didaktik, die eigenen Fehler von Lernenden als ihre individuellen Lerngelegenheiten zu begreifen, die einen wichtigen Motor für den subjektiven Lernfortschritt bilden. Diese Sichtweise wurzelt aus psychologischer Perspektive in Analysen in der Tradition Piagets, der in Abkehr von einer quantitativen, psychometrischen Beschreibung kognitiver Prozesse, wie sie sich zum Beispiel in Intelligenztheorien nach Binet findet, qualitativ zu beschreiben versuchte, in welcher Weise Kinder und Jugendliche denken und urteilen. Doch auch schon in der klassischen Philosophie sind entsprechende Ansätze zu finden. Prominente Beispiele hierfür sind die Idolenlehre Bacons und die Ideenlehre Platons.

  2. Das Blüte-Bestäuber-Netz auf Brachflächen : biozönologische Untersuchung zur Bedeutung von Brachen in einer intensiv genutzten Agrarlandschaft

    NASA Astrophysics Data System (ADS)

    Hahn, Robert

    2002-11-01

    In der vorliegenden Dissertation wird die Bedeutung von Brachen für Artenvielfalt und Stabilität von Blüte-Bestäuber-Nahrungsnetzen in agrarisch genutzten Landschaften anhand ausgewählter blütenbesuchender Insektengruppen (Syrphidae, Lepidoptera) untersucht. Die Freilandarbeiten fanden von 1998-2000 im Raum der Feldberger Seenlandschaft, Mecklenburg-Vorpommern, statt. Es werden die beiden Hauptnahrungsquellen Nektar und Pollen betrachtet, dabei fanden Untersuchungen zur Intensität der Blüte-Bestäuber-Interaktion auf Stilllegungsflächen, zum flächenbezogenen quantitativen Nektarangebot im Jahresverlauf, zur individuellen Pollennutzung bei Syrphiden und zur Breite und Überlappung der Nahrungsnischen bei den dominanten Arten Episyrphus balteatus, Metasyrphus corollae, Syritta pipiens und Sphaerophoria scripta statt. Im Ergebnis zeigt sich eine hohe Bedeutung der Brachflächen für die Stabilität des Blüte-Bestäuber-Netzes, während die Diversität von anderen, eher landschaftsbezogenen Faktoren abhängig ist. This dissertation examines the importance of fallow land for the diversity and stability of pollination webs in agricultural landscapes as exemplified by selected groups of anthophilous insects (syrphidae and lepidoptera). The field studies were carried out between 1998 and 2000 in the Feldberg lakeland area in the north-east German State of Mecklenburg-Western Pomerania. Observations were made of nectar and pollen as the two main sources of food. Studies were conducted into the intensity of plant-pollinator interaction in set-aside areas, the site-specific quantity of nectar available during the vegetation period and the individual pollen intake of syrphid flies. Different methods were employed to establish the breadth of the trophic niches among the predominant species (Episyrphus balteatus, Metasyrphus corollae, Syritta pipiens and Sphaerophoria scripta) and the extent to which they overlapped. The studies showed that, while fallow land is very

  3. Einblicke in die Dynamik von Quantensystemen: Elektrostatische Speicherringe

    NASA Astrophysics Data System (ADS)

    Welsch, Carsten P.

    2005-03-01

    Elektrostatische Speicherringe kombinieren die Vorteile elektrostatischer Fallen und klassischer magnetischer Speicherringe. Kompaktheit, gute Zugänglichkeit sämtlicher Elemente, hohe Flexibilität in der Wahl möglicher Experimente und die Eigenschaft, alle Teilchen unabhängig von ihrer Masse über einen weiten Geschwindigkeitsbereich zu speichern, bieten Zugang zu einem weiten experimentellen Spektrum. Insbesondere das Potenzial, das in neuartigen, energievariablen Maschinen in Kombination mit Elektronenkühlung, internen Targets und hochauflösenden Reaktionsmikroskopen steckt, verspricht hochinteressante Ergebnisse mit den unterschiedlichsten Teilchen - von exotischen Antiprotonen oder schweren radioaktiven Ionen bis hin zu einfachen und komplexen Molekülen oder Biosystemen.

  4. Grundsätze über die Anlagen neuer Sternwarten mit Beziehung auf die Sternwarte der Universität Göttingen. Von Georg Heinrich Borheck

    NASA Astrophysics Data System (ADS)

    Beuermann, Klaus; Borheck, Georg Heinrich

    Die Göttinger Sternwarte, Wirkungsstätte des berühmten Gelehrten Carl Friedrich Gauß, ist ein bedeutendes Baudenkmal. Im Jahre 2005 wird sie gemeinsam von der Georg-August-Universität und der Akademie der Wissenschaften zu Göttingen renoviert, um dann als repräsentatives Gebäude der Universität und Arbeitsstätte der Akademie zu dienen. Die Nutzung der historischen Räume für Ausstellungen macht diesen imposanten Bau erstmals der Öffentlichkeit zugänglich. Die Sternwarte war bei ihrer Errichtung vor 200 Jahren ein nach seinerzeit neuesten wissenschaftlichen Erkenntnissen konzipierter Bau, der die Universität Göttingen in eine der vordersten Stellen Europa rückte. Auch aufgrund ihrer Architektur ist sie ein großer Wurf des Göttinger Universitätsbaumeisters Georg Heinrich Borheck. Durch die Kriegswirren der Napoleonischen Zeit zerschlug sich Borhecks Versuch einer Publikation seiner Beschreibung des Baus der Göttinger Sternwarte 1805. Doch seine Schrift ist auch heute noch aktuell und wird mit diesem Band erstmals einer breiten Öffentlichkeit zugängig gemacht. Er zeigt die Grundsätze, nach denen damals öffentliche Bauten konzipiert wurden, erläutert die Bedeutung des Baus aus kunst- und wissenschaftshistorischer Sicht und informiert über die Pläne zur Restaurierung der Sternwarte in einem separaten Beitrag und im Geleitwort des Präsidenten der Georg-August Universität Prof. Dr. Dr. h. c. Kurt von Figura.

  5. Bewertung von Fahrzeuggeräuschen

    NASA Astrophysics Data System (ADS)

    Genuit, Klaus; Schulte-Fortkamp, Brigitte; Fiebig, André; Haverkamp, Michael

    Bei der Wahrnehmung und Beurteilung eines Automobils sind unzählige Merkmale und Eigenschaften von Bedeutung. Dabei können Merkmale objektiv-technisch beschrieben werden, wie Angaben zur Motorisierung, Höchstgeschwindigkeit, Drehmoment, zulässige Zuladung, Verbrauch usw. Daneben sind weitere Eigenschaften von Bedeutung, die sich einer einfachen objektiv-technischen Beschreibung entziehen. Hier sind Begriffe zu nennen, wie Sicherheit, allgemeine Qualitätsanmutung, Design, Ergonomie, Komfort, Haptik, Fahrdynamik, Zuverlässigkeit, die deutlich schwieriger objektiv erfassbar und beschreibbar sind (Abb. 4.1).

  6. Wilhelm Julius Foerster und die "Vereinigung von Freunden der Astronomie und kosmischen Physik" (1891 bis 1914).

    NASA Astrophysics Data System (ADS)

    Tiemann, K.-H.

    Am 19. Mai 1891 wurde ins Leben gerufen die "Vereinigung von Freunden der Astronomie und der kosmischen Physik (nachfolg.: V.A.P.) - eine der beiden institutionellen Vorläufer der sich 1953 konstituierenden "Vereinigung der Sternfreunde".

  7. Die Struktur von schlankem Materialfluss mit Lean Production Kanban und Innovationen

    NASA Astrophysics Data System (ADS)

    Scheid, Wolf-Michael

    In der Literatur wird Materialfluss überwiegend in Spezialdisziplinen betrachtet, etwa der Steuerungslogik, der Logistiktechnik oder dem Supply Chain Management. Ein charakterisierendes Merkmal des Materialflusses ist jedoch, dass er sich aus vielfältigen Einzelbausteinen zusammensetzt, die alle harmonisch abgestimmt sein müssen. Die maximal erreichbare Effizienz wird nicht durch Höchstleistungen in dem einen oder anderen Spezialthema bestimmt, sondern durch das schwächste Glied im gesamten komplexen Netzwerk. Den Schnittstellen zwischen den betroffenen Fachbereichen in einem Unternehmen kommt hier eine ganz besondere Bedeutung zu: Erst ein harmonischer Einklang ermöglicht hohe Effektivität. Dies setzt umfassendes Verständnis für interdisziplinäre Notwendigkeiten, ein hohes Maß an Abstimmung mit den operativen Prozessen und letztlich einen einvernehmlichen Umgang und den Respekt vor den Problemstellungen des Anderen voraus.

  8. Die nuklearen Anlagen von Hanford (1943-1987) Eine Fallstudie über die Schnittstellen von Physik, Biologie und die US-amerikanische Gesellschaft zur Zeit des Kalten Krieges

    NASA Astrophysics Data System (ADS)

    Macuglia, Daniele

    Die Geschichte des Kalten Krieges eröffnet viele Möglichkeiten, sich näher mit den Schnittstellen von Physik und Biologie während des 20. Jahrhunderts zu befassen. Nicht nur das Unglück in Tschernobyl aus dem Jahr 1986, auch das Beispiel der nuklearen Anlagen in Hanford in den Vereinigten Staaten zeigt die biologischen Folgen von nuklearer Physik.

  9. Die neue Kosmologie. Von Dunkelmaterie, GUTs und Superhaufen.

    NASA Astrophysics Data System (ADS)

    Cornell, J.

    This book is a German translation, by M. Röser, of the American original "Bubbles, voids, and bumps in time: the new cosmology", published 1989 (see 49.003.045). Contents: 1. Die Entdeckung des Weltalls: Eine Einleitung (A. P. Lightman). 2. Die Vermessung des Weltalls: Rotverschiebungen und Standardkerzen (R. P. Kirshner). 3. Die Kartierung des Weltalls: Scheiben und Blasen (M. J. Geller). 4. Die Bestimmung der Masse im Weltall: Dunkelmaterie und fehlende Masse (V. C. Rubin). 5. Der Beginn des Weltalls: Urknall und kosmische Inflation (A. H. Guth). 6. Die Ausweitung des Weltalls: Das Weltraumteleskop und Perspektiven für die nächsten 20 Jahre (J. E. Gunn).

  10. Wirkungen biogener Amine auf die Erregungs-Sekretions-Kopplung in der Speicheldrüse von Periplaneta americana (L.)

    NASA Astrophysics Data System (ADS)

    Rietdorf, Katja

    2003-07-01

    habe gefunden, dass die Aktivität der Na+-K+-ATPase wichtig für die Modifikation des DA-stimulierten Primärspeichels ist. Im Gegensatz dazu ist sie für die Modifikation des 5-HT-stimulierten Primärspeichels nicht von Bedeutung. Bezüglich der Flüssigkeitssekretion habe ich keinen Einfluss der Na+-K+-ATPase-Aktivität auf die DA-stimulierten Sekretionsraten gefunden, dagegen ist die 5-HT-stimulierte Sekretionsrate in Anwesenheit von Ouabain gesteigert. Die Aktivität des NKCC ist für beide sekretorische Prozesse, die Ionen- und die Flüssigkeitssekretion, wichtig. Eine Hemmung des NKCC bewirkt eine signifikante Verringerung der Raten der Flüssigkeitssekretion nach DA- und 5-HT-Stimulierung sowie in beiden Fällen einen signifikanten Abfall der Ionenkonzentrationen im Endspeichel. Im zweiten Teil meiner Arbeit habe ich versucht, Änderungen der intrazellulären Ionenkonzentrationen in den Acinuszellen während einer DA- oder 5-HT-Stimulierung zu messen. Diese Experimente sollten mit der Methode des "ratiometric imaging" durchgeführt werden. Messungen mit dem Ca2+-sensitiven Fluoreszenzfarbstoff Fura-2 zeigten keinen globalen Anstieg in der intrazellulären Ca2+-Konzentration der P-Zellen. Aufgrund von Problemen mit einer schlechten Beladung der Zellen, einer starken und sich während der Stimulierung ändernden Autofluoreszenz der Zellen sowie Änderungen im Zellvolumen wurden keine Messungen mit Na+- und K+-sensitiven Fluoreszenzfarbstoffen durchgeführt. Im dritten Teil dieser Arbeit habe ich die intrazellulären Signalwege untersucht, die zwischen einer 5-HT-Stimulierung der Drüse und der Proteinsekretion vermitteln. Dazu wurde der Proteingehalt im Endspeichel biochemisch mittels eines modifizierten Bradford Assay gemessen. Eine erstellte Dosis-Wirkungskurve zeigt, dass die Rate der Proteinsekretion von der zur Stimulierung verwendeten 5-HT-Konzentration abhängt. In einer Serie von Experimenten habe ich die intrazellulären Konzentrationen von Ca2+, c

  11. Reinraumtechnik für die Medizintechnik

    NASA Astrophysics Data System (ADS)

    Petek, Max; Jungbluth, Martin; Krampe, Erhard

    Die Reinraumtechnik ist heute ein unverzichtbarer Bestandteil bei der Fertigung von Produkten der Life Sciences, den Bereichen Pharma, Lebensmittel, Kosmetik und Medizintechnik. In Anbetracht der langen Historie der Medizintechnik ist sie jedoch eine sehr junge Disziplin. Die Bedeutung von Keimen und die richtige Einschätzung ihrer Größe wurden zwar sehr früh bereits durch Paracelsus erkannt, jedoch wurden daraus noch keine speziellen oder kontinuierlich umgesetzten Hygienevorschriften abgeleitet. Die erste bekannte technische Umsetzung von Hygieneempfehlungen geht auf den Franzosen François Nicolas Appert zurück, der eine aseptische Abfüllmethode für Lebensmittel entwickelte und diese 1810 veröffentlichte [1]. Die erste dokumentierte medizinische Umsetzung stellten Hygienevorschriften für Ärzte dar, die Ignaz Philipp Semmelweis nach 1847 in der Wiener Klinik für Geburtshilfe einführte [2].

  12. [Beweggründe von Krebspatienten für und gegen die Inanspruchnahme der Misteltherapie].

    PubMed

    Gschwendtner, Kathrin M; Holmberg, Christine; Weis, Joachim

    2016-01-01

    Einleitung: Die Misteltherapie ist im deutschsprachigen Raum ein häufig angewandtes komplementärmedizinisches Verfahren (KM) in der Onkologie. Diese Studie hatte das Ziel, die Beweggründe für oder gegen eine Inanspruchnahme der Misteltherapie zu untersuchen und Themenfeldern zuzuordnen. Patienten und Methoden: Es wurden qualitative leitfadengestützte Interviews mit Krebspatienten geführt. Der Interviewleitfaden fragte nach der Inanspruchnahme von KM, der Motivation zur Inanspruchnahme, Informationsverhalten und -bedürfnissen zu KM sowie nach der Krebserkrankung. Um die Beweggründe für die Inanspruchnahme oder Nichtinanspruchnahme der Misteltherapie zu verstehen, wurden die Interviews inhaltsanalytisch ausgewertet. Ergebnisse: Insgesamt wurden Interviews mit 88 Krebspatienten geführt, davon nutzen 18 (20,5%) die Misteltherapie. Die Beweggründe für oder gegen eine Inanspruchnahme der Misteltherapie ließen sich den 2 Themenfeldern «Wahrgenommene Indikation» und «Abwägungen bei der Entscheidungsfindung» zuordnen. Diskussion und Schlussfolgerungen: Mit der Misteltherapie wird sowohl ein Einfluss auf das Tumorwachstum als auch eine supportive Wirkung assoziiert. Anwender sehen die Misteltherapie als sicheres Verfahren; Nichtnutzer befürchten eher Neben- oder Wechselwirkungen. Die Empfehlung von Fachpersonal spielt eine wichtige Rolle bei der Inanspruchnahme. Zum Teil waren die Nichtnutzer interessiert an der Anwendung der Misteltherapie, befanden sich jedoch noch im Klärungsprozess.

  13. [Beweggründe von Krebspatienten für und gegen die Inanspruchnahme der Misteltherapie].

    PubMed

    Gschwendtner, Kathrin M; Holmberg, Christine; Weis, Joachim

    2016-01-01

    Einleitung: Die Misteltherapie ist im deutschsprachigen Raum ein häufig angewandtes komplementärmedizinisches Verfahren (KM) in der Onkologie. Diese Studie hatte das Ziel, die Beweggründe für oder gegen eine Inanspruchnahme der Misteltherapie zu untersuchen und Themenfeldern zuzuordnen. Patienten und Methoden: Es wurden qualitative leitfadengestützte Interviews mit Krebspatienten geführt. Der Interviewleitfaden fragte nach der Inanspruchnahme von KM, der Motivation zur Inanspruchnahme, Informationsverhalten und -bedürfnissen zu KM sowie nach der Krebserkrankung. Um die Beweggründe für die Inanspruchnahme oder Nichtinanspruchnahme der Misteltherapie zu verstehen, wurden die Interviews inhaltsanalytisch ausgewertet. Ergebnisse: Insgesamt wurden Interviews mit 88 Krebspatienten geführt, davon nutzen 18 (20,5%) die Misteltherapie. Die Beweggründe für oder gegen eine Inanspruchnahme der Misteltherapie ließen sich den 2 Themenfeldern «Wahrgenommene Indikation» und «Abwägungen bei der Entscheidungsfindung» zuordnen. Diskussion und Schlussfolgerungen: Mit der Misteltherapie wird sowohl ein Einfluss auf das Tumorwachstum als auch eine supportive Wirkung assoziiert. Anwender sehen die Misteltherapie als sicheres Verfahren; Nichtnutzer befürchten eher Neben- oder Wechselwirkungen. Die Empfehlung von Fachpersonal spielt eine wichtige Rolle bei der Inanspruchnahme. Zum Teil waren die Nichtnutzer interessiert an der Anwendung der Misteltherapie, befanden sich jedoch noch im Klärungsprozess. PMID:27606463

  14. Charakterisierung von Sulfotransferasen im Gastrointestinaltrakt von Mensch und Ratte und Aktivierung von Promutagenen in V79-Zellen, die eine intestinale Form (1B1) des Menschen und der Ratte exprimieren

    NASA Astrophysics Data System (ADS)

    Teubner, Wera

    2001-05-01

    als bei V79-r1B1/A. Die zytosolische Fraktion aus V79-r1B1/B-Zellen enthielt in etwa die dreifache Menge an r1B1-Protein wie die aus Colonmucosa der Ratte. Da zumindest für die humane Mukosa gezeigt wurde, da die 1B1 nur im einschichtigen Epithel, nicht aber in allen Zellen der Mukosa exprimiert wird, repräsentiert die zytosolische Fraktion aus der Mukosa nur bedingt die Expression in den Epithelzellen und der Vergleich mit den V79-1B1-Zellen ist grob. Im Gegensatz zu V79-r1B1/B war die Zellinie V79-h1B1, die ebenfalls nur mit Darm und Leber vergleichbare Mengen an h1B1 exprimierte, in der Lage, beide benzylischen Alkohole zu aktivieren. Der Erhöhung der Mutantenfrequenz im Vergleich zur KontrollZellinie war ähnlich wie bei der stark exprimierenden Zellinie V79-r1B1/A, erforderte aber 10fach höhere Konzentrationen. Somit unterscheiden sich Mensch und Ratte nicht nur insgesamt in ihrer Ausstattung des Gastrointestinaltrakts mit Sulfotransferasen, auch bei Betrachtung einer einzelnen Form zeigten sich deutliche Unterschiede in der Aktivierung von zwei Promutagenen. Die Ratte ist daher ein ungeeignetes Modell, um die Rolle von Sulfotransferasen bei tumorinitiierenden Prozessen im Darm zu untersuchen. Dies unterstreicht die Bedeutung von rekombinanten in-vitro-Systemen für die Erfassung des humanen Metabolismus von Fremdstoffen. Insgesamt kennt man nur eine geringe Anzahl von Substanzen, die im Tierexperiment Colontumore erzeugen, und mit Ausnahme der heterozyklischen aromatischen Amine sind diese lediglich von experimenteller Bedeutung. Dies spricht für effiziente Schutzmechanismen der Darmmukosa gegenüber Mutagenen und lät die Frage nach der hohen Inzidenz des Kolorektalkarzinoms offen. Cytosolic fractions of human and rat gastro-intestinal mucosa were electrophoresed, blotted and probed with six antibodies with differing specificities for sulfotransferase (SULT) forms. Using SULTs heterologously expressed in bacteria for comparison of electrophoretic and

  15. Gesellschaft, Lebensgemeinschaft, Ökosystem - Über die Kongruenz von politischen und ökologischen Theorien der Entwicklung

    NASA Astrophysics Data System (ADS)

    Voigt, Annette

    Im Jahr 1859 veröffentlichte Charles Darwin "On the Origin of Species“. Seine Evolutionstheorie ist das wohl spektakulärste Beispiel einer naturwissenschaftlichen Theorie großer gesellschaftlicher Relevanz. Ihre verschiedenen Facetten wurden in der Öffentlichkeit kontrovers diskutiert, unter anderem auch ihre Anwendung zur Erklärung von Zuständen und Prozessen menschlicher Gesellschaften. Zum Teil wurde die Seiensweise der Natur - scheinbar unabhängig von gesellschaftlichen Interessen - für die Erklärung und Legitimation gesellschaftlicher Zustände oder die Legitimation von politischen Ideologien herangezogen (Sozialdarwinismus). Denn Gesellschaft funktioniere ja so, wie Darwin die Natur erklärt habe: es herrsche z. B. Konkurrenzkampf, Auslese und Arbeitsteilung, Erfolg hätten diejenigen, die sich an die Bedingungen am Besten anpassten.

  16. Über den Einfluß von Wirbelströmen auf die Frequenzabhängigkeit der komplexen Permeabilität hochpermeabler Mangan-Zink-Ferrite

    NASA Astrophysics Data System (ADS)

    Dietzmann, G.; Schaefer, M.

    Nach der Einleitung, in der die Bedeutung der Wirbelströme für den Anstieg der Verluste mit der Frequenz in hochpermeablen Mn-Zn-Ferriten dargelegt wird, werden in Abschn. 2 gemessene Ortskurven der komplexen Permeabilität von Mn-Zn-Ferriten mit Werten der Anfangspermeabilität von 4000 bis 8000 und des spezifischen Widerstandes von 7 bis 138 cm (bei R. T.) vorgestellt. In Abschn. 3 wird der Versuch erläutert, einen gewissen Anfangsteil dieser Ortskurve durch theoretische Wirbelstromortskurven der komplexen Permeabilität, bei denen die Relaxation der komplexen Leitfähigkeit in Form eines von GRANT angegebenen Ausdruckes berücksichtigt ist, wiederzugeben. Die Ergebnisse, die in Abschn. 4 diskutiert werden, erlauben den Schluß, daß die mit der Relaxation der Leitfähigkeit verknüpften kapazitiven Wirbelströme für den Charakter des Anfangsverlaufes der an Ringkernen gemessenen Ortskurven der komplexen Permeabilität von hochpermeablen Mn-Zn-Ferriten bestimmend sein können.Translated AbstractOn the Effect of Eddy Currents on the Magnetic Spectra of High-permeability Manganese-zinc FerritesAfter stressing the importance of eddy currents on the increase of magnetic losses with frequency on high-permeability Mn-Zn-ferrites (in the introduction), experimental curves in the complex plane of the variation of the complex permeability with frequency of Mn-Zn-Ferrites with an initial permeability of 4000 up to 8000 and resistivity of 7 up to 130 ohm . cm are presented in section 2. In section 3 the attempt is stated of reproducing a certain initial part of the curve of complex permeability by theoretical eddy current curves, taking into account the relaxation of complex conductivity in form of an expression given by GRANT. The results discussed in section 4 permit the conclusion, that the capacitive eddy currents due to the relaxation of conductivity may be the essential factor determining the character of the initial turn of the complex magnetic dispersion curve

  17. Renaturierung von Waldökosystemen

    NASA Astrophysics Data System (ADS)

    Zerbe, Stefan

    Wälder sind neben der Landwirtschaft und den urban-industriellen Siedlungsflächen flächenmäßig die Hauptnutzungstypen in Mitteleuropa und stellen heute multifunktionale ökosysteme dar. Zusätzlich zur Holzproduktion kommt ihnen eine Regulations-(z.B.Wasserhaushalt), Schutz (z.B. von Biodiversität und gegen Erosion, Lawinen, Immissionen und Lärm) und Erholungsfunktion zu. Zudem haben Wälder als Kohlenstoffsenken auch eine besondere Bedeutung für den Klimaschutz.

  18. Charakterisierung von Sulfotransferasen im Gastrointestinaltrakt von Mensch und Ratte und Aktivierung von Promutagenen in V79-Zellen, die eine intestinale Form (1B1) des Menschen und der Ratte exprimieren

    NASA Astrophysics Data System (ADS)

    Teubner, Wera

    2001-05-01

    Die Ausstattung der gastrointestinalen Mukosa des Menschen und der Ratte mit Sulfotransferasen wurde mit Hilfe von Immunodetektion und Enzymaktivitätsmessungen untersucht. In Proben aus Colon und Rektum von 39 Personen wurden die Formen h1A1, h1A3 und h1B1 identifiziert, wobei in einer weiteren Probe, die als einzige von einem an Colitis Ulcerosa erkrankten Patienten stammte, keine Sulfotransferasen nachgewiesen werden konnten. Bei der Immunblot-Analyse war das Expressionsmuster der einzelnen Formen in allen Proben ähnlich. In wenigen Proben waren die relativen Signalintensitäten der h1A1 und der h1B1 um die Hälfte erniedrigt. Der Gehalt von SULT an zytosolischem Protein zeigte einen bis zu 8 - 10fachen Unterschied, er betrug jedoch bei zwei Dritteln der Proben zwischen 0,15 und 0,3 (h1A1 und h1A3) bzw. 0,6 und 0,8 Promille (h1B1). Die Variation konnte nicht auf Alter, Geschlecht oder Krankheitsbild der Patienten zurückgeführt werden. Auch der für die allelischen Varianten der h1A1 beschriebene Effekt auf die Enzymaktiviät bzw. Stabilität konnte in der Menge an immunreaktivem Protein nicht in diesem Ausma detektiert werden. Die Allelhäufigkeit von h1A1*R und h1A1*H war gegenüber der gesunden Bevölkerung nicht verändert. In den sieben Proben aus dem Dünndarm (Coecum, viermal Ileum, Jejunum) konnten zusätzlich die Formen h1E1 und h2A1 identifiziert werden. Ein möglicherweise der Form h1C1 entsprechendes Protein wurde im Magen detektiert. Im Vergleich zum Menschen war die Expression in der Ratte stärker auf die Leber konzentriert. Während beim Menschen in allen untersuchten Abschnitten Sulfotransferasen in Mengen detektiert wurden, die in zwei Fällen (h1B1 und h1A3) sogar den Gehalt in der Leber überstiegen, beschränkte sich die Expression in der Ratte auf im Vergleich zur Leber geringe Mengen im Magen und Dickdarm. Nachgewiesen wurden die r1B1, r1A1 sowie eine nicht identifizierte Form von 35kD, bei der es sich vermutlich um die r1C2 handelt. Im

  19. Digitale Subtraktion von kontrastiertem Stuhlmaterial für die virtuelle CT-Koloskopie

    NASA Astrophysics Data System (ADS)

    Mostarkic, Zvonimir; Gündel, Lutz; Freisleben, Bernd

    In der virtuellen Koloskopie mittels CT-Daten werden Stuhlreste durch oral zugeführte Kontrastmittel hervorgehoben, um diese vom umliegenden Darmgewebe des Patienten abzugrenzen. Eine eindeutige 3D Befundung wird für den Radiologen ermöglicht, nachdem die Stuhlreste aus den Bilddaten entfernt und die Darmwände für den virtuellen Darmdurchflug nicht verdeckt werden. In diesem Beitrag wird ein Verfahren vorgestellt, welches ermöglicht, Stuhl- und Flüssigkeitsreste nachträglich aus Computertomographien zu subtrahieren, ohne dabei falscherweise Darmgewebe zu entfernen. Zum einen kommen dabei adaptive Schwellwerte zum Einsatz, die aus dem Histogramm des CTDatensatzes gewonnen werden, und zum anderen werden mit einer Eigenwertanalyse der Hesse'schen Matrix Darmfaltenperforationen vermieden.

  20. Restaurierung von Seen und Renaturierung von Seeufern

    NASA Astrophysics Data System (ADS)

    Grüneberg, Björn; Ostendorp, Wolfgang; Leßmann, Dieter; Wauer, Gerlinde; Nixdorf, Brigitte

    Süßwasserseen haben als ökosysteme und Lebensraum für Pflanzen und Tiere eine herausragende Bedeutung für die Artenvielfalt auf der Erde und prägen als Landschaftselemente unsere natürliche Umwelt. Seen fungieren als natürliche Stoffsenken, vor allem für Kohlenstoff und Nährstoffe, aber auch als Senken für in ihren Einzugsgebieten emittierte gelöste und feste Schadstoffe. Darüber hinaus ist Wasser eine wichtige Naturressource. Süßwasserseen stellen in den meisten Regionen der Erde lebenswichtige Quellen für die Versorgung mit Trinkwasser und tierischem Eiweiß (Fischfang) dar. Sie dienen als Wasserspeicher für die landwirtschaftliche und industrielle Nutzung. Auch für Erholungsaktivitäten des Menschen kommt ihnen eine große Bedeutung zu.

  1. DIE BEWERTUNG VON OZONREAKTOREN

    EPA Science Inventory

    Evaluation of Ozone Reactors
    The use of lake water as drinking water resource involves a multistage treatment procedure. Food-related laws and regulations, in particular the food ordinance and the hygiene ordinance, require the identification and assessment of health risks, ...

  2. Claudius Ptolemäus: Der Sternkatalog des Almagest. Die arabisch-mittelalterliche Tradition. II. Die lateinische Übersetzung Gerhards von Cremona.

    NASA Astrophysics Data System (ADS)

    Kunitzsch, P.

    This book is the second volume in P. Kunitzsch's Ptolemy project. It presents the text edition of Ptolemy's star catalogue in the Latin translation from the Arabic of Gerhard von Cremona (Toledo, ca. 1150 - 1180). The first volume, containing a German translation and the Arabic text of the catalogue, was published in 1986 (42.003.021).

  3. „Überholen ohne einzuholen“ Die Entwicklung von Technologien für übermorgen in Kernenergie und Mikroelektronik der DDR

    NASA Astrophysics Data System (ADS)

    Barkleit, Gerhard

    Dem nuklearen Patt zwischen Ostblock und westlichem Staatenbündnis ist es nach weitgehend übereinstimmender Auffassung von Politik und Wissenschaft zu danken, dass der "Kalte Krieg" in der zweiten Hälfte des 20. Jahrhunderts nicht zum weltumfassenden Flächenbrand eskalierte. An der raschen Herstellung dieses Patts waren zwei Dresdner Physiker maßgeblich beteiligt, deren einer im Manhattan-Projekt in den USA gearbeitet hatte und später in England der Spionage für die Sowjetunion und des Verrats des Know-how der Atombombe überführt wurde.

  4. Programmierung von Werkzeugmaschinen

    NASA Astrophysics Data System (ADS)

    Ahrberg, Rainer; Barfels, Lutz; Voss, Jürgen

    In den 1950-er Jahren wurde am Bostoner MIT (Massachusetts Institute of Technology) die Grundlage der modernen CNC-Technik gelegt. Für die spanende Herstellung von Rotorprofilen für Hubschrauber auf Basis vorab berechneter Konturverläufe wurden erstmalig Steuerungen auf Basis diskreter elektronischer Bauelemente entwickelt. Mit der Einführung integrierter elektronischer Schaltkreise (ICs) begann diese Technologie schrittweise Einzug in die Werkzeugmaschinenindustrie zu halten. Neben der Entwicklung der Hardware wurde die Programmierung und die Entwicklung von entsprechenden Programmiersprachen ein für die Akzeptanz dieser Technologie entscheidende Größe.

  5. Die qualitätskontrolle als hilfsmittel zur festlegung der produktionsparameter bei der herstellung von lwr-brennstoffen

    NASA Astrophysics Data System (ADS)

    Sondermann, T.

    1982-04-01

    ZusammenfassungDer bekannte Vorteil des AUC-Verfahrens, ein UO 2-Pulver zu liefern, das ohne Zwischenschritte direkt zu Tabletten verpreβt werden kann, geht mit einer weiteren, weniger bekannten positiven Eigenschaft einher: Mit der Wahl der Produktionsparameter bei der UO 2-Pulverherstellung können die Qualitätsmerkmale der Brennstofftabletten direkt gesteuert werden. Wie umfangreiche Untersuchungen gezeigt haben, besteht ein mathematisch formulierbarer Zusammenhang zwischen den Produktionsparametern und den Pulver-bzw. Tablettenqualitäten. Das so erhaltene mathematische Modell gestattet es nun, exakt die Produktionsparameter einzustellen, die zur gewünschten Qualität führen, wobei gleichzeitig die wirtschaftliche Fahrweise gewählt werden kann.

  6. Die moralischen Rechte von Kindern

    NASA Astrophysics Data System (ADS)

    Giesinger, Johannes

    2007-01-01

    THE MORAL RIGHTS OF CHILDREN - Most people today believe that children should be accorded legal or moral rights. In the course of the past few decades, however, objections to this view have been repeatedly raised. According to one objection, it is inappropriate for children to be the bearers of rights. Another group of objectors say that children's interests are not being served if rights are allocated to them. This paper acknowledges that rights alone are not enough to protect children's basic needs and interests in full. It is therefore inappropriate to resort to exclusively rights-based language when referring to the relationship between parents and children. Nevertheless, as this paper argues, it is advisable to provide children with moral rights. In response to the initial objection, a concept of rights is put forward which enables children, like adults, to be considered as the bearers of rights.

  7. Die Kometen der Jahre 1531 bis 1539 und ihre Bedeutung fur die spatere Entwicklung der Kometenforschung

    NASA Astrophysics Data System (ADS)

    Kokott, Wolfgang

    The apparition of P/Halley in 1531 is known mostly for Peter Apian's statement of the antisolar direction of cometary tails and for Edmond Halley's discovery of its periodicity following its 1682 return. However, the 1531 event and the four comets of subsequent years are also remarkable for the first attempts, by several observers, to record and investigate their apparent orbits in a quantitative way with an accuracy making modern treatment feasible. Thus, the decade in question may be regarded as the beginning of modern cometary research. Within a broader historical context, the book outlines the significance of this series of comets w.r.t. the change of theory and observational practice prior to Tycho Brahe. It also documents the secondary sources throughout the following centuries and later attempts at interpreting the material. The possibilities inherent in the re-evaluation of historical observations by modern methods in the light of collateral evidence become transparent by means of the results of some recent orbit determinations.

  8. Entwicklung von umwelt- und naturschutzgerechten Verfahren der landwirtschaftlichen Landnutzung für das Biosphärenreservat Schorfheide-Chorin

    NASA Astrophysics Data System (ADS)

    Meyer-Aurich, Andreas

    1999-11-01

    Mit der vorliegenden Arbeit werden exemplarisch Chancen und Grenzen der Integration von Umwelt- und Naturschutz in Verfahren der ackerbaulichen Landnutzung aufgezeigt. Die Umsetzung von Zielen des Umwelt- und Naturschutzes in Verfahren der Landnutzung ist mit verschiedenen Schwierigkeiten verbunden. Diese liegen zum einen in der Konkretisierung der Ziele, um diese umsetzen zu können, zum anderen in vielfach unzulänglichem Wissen über den Zusammenhang zwischen unterschiedlichen Formen der Landnutzung und insbesondere den biotischen Naturschutzzielen. Zunächst wird die Problematik der Zielfestlegung und Konkretisierung erörtert. Das Umweltqualitätszielkonzept von Fürst et al. (1992) stellt einen Versuch dar, Ziele des Umwelt- und Naturschutzes zu konkretisieren. Dieses Konzept haben Heidt et al. (1997) auf einen Landschaftsausschnitt von ca. 6000 ha im Biosphärenreservat Schorfheide-Chorin im Nordosten Brandenburgs angewendet. Eine Auswahl der von Heidt et al. (1997) formulierten Umweltqualitätsziele bildet die Basis dieser Arbeit. Für die ausgewählten Umweltqualitätsziele wurden wesentliche Einflussfaktoren der Landnutzung identifiziert und ein Bewertungssystem entwickelt, mit dem die Auswirkungen von landwirtschaftlichen Anbauverfahren auf diese Umweltqualitätsziele abgebildet werden können. Die praktizierte Landnutzung von 20 Betrieben im Biosphärenreservat Schorfheide-Chorin wurde von 1994 bis 1997 hinsichtlich ihrer Auswirkungen auf die Umweltqualitätsziele analysiert. Die Analyse ergab ein sehr differenziertes Bild, das zum Teil Unterschiede in der Auswirkung auf die Umweltqualitätsziele für den Anbau einzelner Kulturen oder für bestimmte Betriebstypen zeigte. Es zeigte sich aber auch, dass es bei der Gestaltung des Anbaus einzelner Kulturarten große Unterschiede gab, die für Umweltqualitätsziele Bedeutung haben. Neben der Analyse der Landnutzung im Biosphärenreservat Schorfheide-Chorin wurde ein System entwickelt, mit dem die modellhafte

  9. Reflexionseigenschaften von Windenergieanlagen im Funkfeld von Funknavigations- und Radarsystemen

    NASA Astrophysics Data System (ADS)

    Sandmann, S.; Divanbeigi, S.; Garbe, H.

    2015-11-01

    Die hier behandelte Untersuchung befasst sich mit den Störungen des elektrischen Feldes einer Doppler Very High Frequency Omnidirectional Radio Range Navigationsanlage (DVOR) in der Gegenwart von Windenergieanlagen (WEA). Hierfür wird die Feldstärke auf 25 konzentrischen Kreisbahnen, sog. Orbit Flights verschiedener Höhen und mit verschiedenen Radien rund um die DVOR-Anlage numerisch simuliert. Insbesondere werden die Einflüsse diverser Parameter der WEA wie deren Anzahl, Position, Rotorwinkel, Turmhöhe und Rotordurchmesser auf die Feldverteilung herausgestellt, sowie die Anwendbarkeit der Simulationsmethode Physical Optics (PO) durch Vergleich der Simulationsergebnisse mit denen der Multi Level Fast Multipol Method (MLFMM) untersucht.

  10. Optimierung von Kommunikationsnetzen

    NASA Astrophysics Data System (ADS)

    Eberspächer, Jörg; Kiese, Moritz; Wessäly, Roland

    Die weltweiten Telekommunikationsnetze (Telefon-, Mobilfunknetze, Internet) bilden heute das Nervensystem von Wirtschaft und Gesellschaft. Durch den anhaltenden technologischen Fortschritt in der Elektronik, der Computer- und Kommunikationstechnik steigt nicht nur die Zahl der Teilnehmer in den Netzen ständig, sondern es entstehen auch laufend neue Anwendungen, wie Radio und Fernsehen im Internet, elektronischer Handel und interaktive Spiele im Internet. Auf den Kupfer- und Glasfaserkabeln sowie den Funkstrecken werden gigantische Informationsmengen transportiert. Das Verkehrs-wachstum ist nach wie vor exponentiell.

  11. Energetische Verwertung von Biomasse

    NASA Astrophysics Data System (ADS)

    Zahoransky, Richard; Allelein, Hans-Josef; Bollin, Elmar; Oehler, Helmut; Schelling, Udo

    Etwa 0,1% der Solarenergie wandeln sich durch Photosynthese aus dem Kohlendioxid der Luft in Biomasse um. Die Biomassen sind als Festbrennstoff nutzbar oder zu gasförmigen Brennstoffen weiterverarbeitbar. Zwei Arten von Biomassen sind zu unterscheiden: Anfallende Biomasse

  12. Herausforderungen durch die deutsche Wiedervereinigung

    NASA Astrophysics Data System (ADS)

    Stäglin, Reiner

    Die Wiedervereinigung stellte auch die Statistik vor große Aufgaben. Die als Organ der staatlichen Planung staatsnah orientierte Statistik der DDR musste auf das zur Neutralität und wissenschaftlichen Unabhängigkeit verpflichtete System der Bundesrepublik umgestellt werden. Ebenso verlangten die Universitäten eine Neuorientierung. Die Deutsche Statistische Gesellschaft hat sich vor allem dreier Aufgaben mit großem Engagement, aber auch mit Bedachtsamkeit angenommen: Aufnahme und Integration der Statistiker aus den neuen Bundesländern in die Gesellschaft, Begleitung der Neuausrichtung des Faches Statistik an deren Hochschulen und Sicherung sowie Nutzung von Datenbeständen der ehemaligen DDR.

  13. Die Amtliche Sammlung von Untersuchungsverfahren nach § 64 LFGB, § 35 Vorläufiges Tabakgesetz und § 28b Gentechnikgesetz - ein Instrument der amtlichen Lebensmittelüberwachung

    NASA Astrophysics Data System (ADS)

    Renger, Silke; Stachel, Carolin

    Immer wieder werden Skandale in Zusammenhang mit Lebensmitteln bekannt. Schlagworte wie BSE, Gammelfleisch, Acrylamid, Cumarin oder auch Melamin, Dioxin sind den Verbrauchern geläufig und erschüttern das Vertrauen in ein gesundes und ernährungsphysiologisch wertvolles Lebensmittel. Das Bewusstsein des Verbrauchers hinsichtlich der Ernährung und der Auswahl beim Kauf der Lebensmittel hat sich in den vergangenen Jahren deutlich verändert. Bei der Auswahl seiner Lebensmittel liegt sein Augenmerk verstärkt auf gesunden, qualitativ hochwertigen und vor allem sicheren Lebensmitteln. Dies wurde insbesondere bei dem verhaltenen Kauf von Fleisch und Fleischerzeugnissen während der BSE-Krise oder auch dem kürzlich aufgetretenen Gammelfleischskandal deutlich.

  14. Analytik von Lebensmittelallergenen

    NASA Astrophysics Data System (ADS)

    Demmel, Anja; Hahn, Alexandra

    Ansonsten harmlose Lebensmittel oder deren Bestandteile können bei von Lebensmittelallergien betroffenen Personen Überempfindlichkeitsreaktionen auslösen. Hierbei kann es sich um immunvermittelte Lebensmittelallergien oder um Intoleranzen gegenüber bestimmten Lebensmittelbestandteilen handeln. Ein Beispiel für Letzteres ist die Laktoseintoleranz, welche durch einen Enzymdefekt hervorgerufen wird [1]. Im Gegensatz hierzu handelt es sich bei Lebensmittelallergien um Sofortreaktionen, die durch IgE-Antikörper gegen Antigene aus den Lebensmitteln hervorgerufen werden und zu verschiedenen körperlichen Beschwerden führen können. Bei den Antigenen, welche von den von Allergikern produzierten IgE-Antikörpern erkannt werden, handelt es sich vor allem um Proteine [2]. Symptome IgE-vermittelter Reaktionen können zum Beispiel Hautausschlag, eine Schwellung der Schleimhäute oder das sogenannte orale Allergiesyndrom mit allergischen Reaktionen an der Mundschleimhaut und im Magen-Darm-Trakt sein [3]. Die hierbei auftretenden Beschwerden reichen von einem Brennen im Mund und einer Schwellung der Lippen und der Zunge bis zu Atemnot verursachenden Schwellungen im Kehlkopfbereich. In besonders schlimmen Fällen können allergische Reaktionen zu einem anaphylaktischen Schock und zum Tod durch Kreislaufversagen führen [4]. Während klassische Nahrungsallergene häufig komplexe Reaktionen zur Folge haben, ist bei Pollen-assoziierten Nahrungsmittelallergien das orale Allergiesyndrom vorherrschend.

  15. Zur Bedeutung von ausserschulischen Bildungsmassnahmen bei der Arbeitsplatzsuche in zwei brasilianischen Industriezentren

    NASA Astrophysics Data System (ADS)

    Lehmann, Rainer H.; Verhine, Robert E.

    1982-03-01

    In view of the high cost and the often disappointing results achieved by the massive extension of general education in developing countries, this article investigates the extent to which out-of-school education and training courses assist workers in Brazilian industrial centres in obtaining employment. By discriminant analysis, information on the education and training of 149 applicants for industrial jobs in João Pessoa and Salvador is related to the success rate of their applications. It is shown that, while formal school education raises the vocational expectations of the workers in both towns, it does not coincide with a higher probability of securing employment. On the other hand, participation in out-of-school education or training correlates positively with employment opportunities, for different reasons according to the context. In João Pessoa, where industry is only in the early stages of development, programmes which appear to have no direct relation to the hoped-for job seem to be as useful in the search for employment as specific professional training courses. This indicates the economic importance of participation in out-of-school courses. In Salvador, however, which is economically more highly developed, out-of-school vocational training alone appears to have a positive influence on the chances of finding employment. Apparently, decision criteria here are oriented more to consideration of usable skills, as they are in Western countries.

  16. Herstellung von Chitosan und einige Anwendungen

    NASA Astrophysics Data System (ADS)

    Struszczyk, Marcin Henryk

    2001-05-01

    1. Die Deacetylierung von crabshell - Chitosan führte gleichzeitig zu einem drastischen Abfall der mittleren viscosimetrischen Molmasse ( Mv), insbesondere wenn die Temperatur und die Konzentration an NaOH erhöht werden. Diese Parameter beeinflussten jedoch nicht den Grad der Deacetylierung (DD). Wichtig ist jedoch die Quelle des Ausgangsmaterials: Chitin aus Pandalus borealis ist ein guter Rohstoff für die Herstellung von Chitosan mit niedrigem DD und gleichzeitig hoher mittlerer Mv, während Krill-Chitin (Euphausia superba) ein gutes Ausgangsmaterial zur Herstellung von Chitosan mit hohem DD und niedrigem Mv ist. Chitosan, das aus Insekten (Calliphora erythrocephala), unter milden Bedingungen (Temperatur: 100°C, NaOH-Konzentration: 40 %, Zeit: 1-2h ) hergestellt wurde, hatte die gleichen Eigenschaften hinsichtlich DD und Mv wie das aus Krill hergestellte Chitosan. Der Bedarf an Zeit, Energie und NaOH ist für die Herstellung von Insekten-Chitosan geringer als für crabshell-Chitosan vergleichbare Resultaten für DD und Mv. 2. Chitosan wurde durch den Schimmelpilz Aspergillus fumigatus zu Chitooligomeren fermentiert. Die Ausbeute beträgt 25%. Die Chitooligomere wurden mit Hilfe von HPLC und MALDI-TOF-Massenspektrmetrie identifiziert. Die Fermentationsmischung fördert die Immunität von Pflanzen gegen Bakterien und Virusinfektion. Die Zunahme der Immunität schwankt jedoch je nach System Pflanze-Pathogen. Die Fermentation von Chitosan durch Aspergillus fumigatus könnte eine schnelle und billige Methode zur Herstellung von Chitooligomeren mit guter Reinheit und Ausbeute sein. Eine partiell aufgereinigte Fermentationsmischung dieser Art könnte in der Landwirtschaft als Pathogeninhibitor genutzt werden. Durch kontrollierte Fermentation, die Chitooligomere in definierter Zusammensetzung (d.h. definierter Verteilung des Depolymerisationsgrades) liefert, könnte man zu Mischungen kommen, die für die jeweilige Anwendung eine optimale Bioaktivität besitzen. 3

  17. Physik gestern und heute Von der Metallstange zum Hochenergielaser

    NASA Astrophysics Data System (ADS)

    Heering, Peter

    2002-05-01

    Im Mai 1752 wurde in Marly bei Paris auf Anregung des amerikanischen Forschers und Politikers Benjamin Franklin erstmals die elektrische Natur des Blitzes nachgewiesen. Damals beschrieb Franklin auch eine technische Vorrichtung, die als Schutz von Gebäuden vor Blitzschlägen dienen sollte: den Blitzableiter. Diese aus heutiger Sicht scheinbar triviale Vorrichtung wurde aber keineswegs unmittelbar akzeptiert. Und bis heute ist die Forschung zum Schutz von Einrichtungen vor Blitzschlägen nicht abgeschlossen.

  18. GEO 600 spitzt die Ohren. Der deutsche Gravitationswellendetektor erreicht seine geplante Empfindlichkeit

    NASA Astrophysics Data System (ADS)

    Borgeest, Ulf

    2005-04-01

    Die Physiker und Astronomen betreiben weltweit fünf große Laserinterferometer zur Messung von Gravitationswellen, darunter GEO 600 bei Hannover. Die hochempfindlichen Detektoren sollen helfen, die energiereichsten Vorgänge im Weltall aufzuklären und fundamentale physikalische Probleme zu lösen. Zur Zeit beginnen die ersten Messungen mit einer Empfindlichkeit, die astronomische Beobachtungen erlaubt.

  19. Die kalte Zunge

    NASA Astrophysics Data System (ADS)

    Bartels, Sören; Müller, Rüdiger

    Gefühlte Temperaturen. Ist ein Null Grad Celsius kalter Metallstab eigentlich kälter als ein Holzstab mit der selben Temperatur? Rein physikalisch gesehen natürlich nicht, aber wenn wir beide Stäbe anfassen, kommt uns der Metallstab deutlich kälter vor. Und wer kennt nicht die Szene aus dem Film Dumm und Dümmer in der Harry mit seiner Zunge am Metallrahmen des Skilifts hängen bleibt.Würde das auch passieren, wenn man an einem eiskalten Stück Holz lecken würde? Wohl kaum, doch woran liegt das eigentlich? Unterschiedliche Materialien haben verschiedene Fähigkeiten, Wärme zu übertragen und zu leiten. So transportiert Metall die von der Zunge ausgehende Wärme sehr schnell weiter und verändert seine Temperatur kaum, während die Zunge abkühlt. Holz hingegen leitet Wärme fast gar nicht und daher wird der Teil, der von der Zunge berührt wird, aufgewärmt.

  20. Die Europäische Union, die Europäische Gemeinschaft und ihre Rechtsordnung, die Europäische Lebensmittelkontrolle

    NASA Astrophysics Data System (ADS)

    Gallhoff, Gudrun; Rimkus, Gerhard G.

    Die Europäische Union (EU) ist ein Zusammenschluss von siebenundzwanzig unabhängigen Staaten, um deren wirtschaftliche, politische und soziale Zusammenarbeit zu verstärken. Seit 1. Mai 2007 hat sie die folgenden Mitglieder: Österreich, Belgien, Bulgarien, Dänemark, Finnland, Frankreich, Deutschland, Griechenland, Irland, Italien, Luxemburg, die Niederlande, Portugal, Spanien, Schweden, das Vereinigte Königreich von Großbritannien und Nordirland, Zypern, die Tschechische Republik, Estland, Ungarn, Lettland, Litauen, Malta, Polen, Rumänien, die Slowakei und Slowenien [1]. (Hinweis: Die Republik Zypern hat juristisch Souveränität über die ganze Insel, da die Türkische Republik Nordzypern international nicht anerkannt wird.)

  1. Dr. Wernher von Braun Laid to Rest

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Dr. Wernher von Braun served as Marshall Space Flight Center's first director from July 1, 1960 until January 27, 1970, when he was appointed NASA Deputy Associate Administrator for Planning. Following World War II, Dr. von Braun and his German colleagues arrived in the United States under Project Paper Clip to continue their rocket development work. In 1950, von Braun and his rocket team were transferred from Ft. Bliss, Texas to Huntsville, Alabama to work for the Army's rocket program at Redstone Arsenal and later, NASA's Marshall Space Flight Center. Under von Braun's leadership, Marshall developed the Saturn V launch vehicle which took Apollo astronauts to the moon. Dr. von Braun died in Alexandria, Va., on June 16, 1977, seven years after his NASA appointment. This photo was taken at the site where he was laid to rest.

  2. Der Physik-Nobelpreis vor 100 Jahren Die Entdeckung des trägen Gases

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2004-11-01

    Im Jahr 1904 erhielt der britische Physiker Lord Rayleigh (John William Strutt, 1842 bis 1919) den Nobelpreis für seine Untersuchungen über die Dichte von Gasen und die Entdeckung des Edelgases Argon.

  3. Einführung in die Astronomie.

    NASA Astrophysics Data System (ADS)

    Winnenburg, W.

    Contents: 1. Forschungbereich Astronomie. 2. Astronomische Beobachtungstechnik. 3. Bewegungen am Sternenhimmel. 4. Dynamik im Planetensystem. 5. Aufbau des Planetensystems. 6. Die Sonne. 7. Meßbare Eigenschaften der Sterne. 8. Aufbau von Sternen. 9. Veränderliche Sterne und Sonderfälle. 10. Der interstellare Raum. 11. Ko-Evolution von Sternen und Materie. 12. Astronomische Entfernungsbestimmung. 13. Milchstraßensystem. 14. Extragalaktische Systeme. 15. Das Weltall. 16. Grenzfragen.

  4. Entwicklungsperspektiven von Social Software und dem Web 2.0

    NASA Astrophysics Data System (ADS)

    Raabe, Alexander

    Der Artikel beschäftigt sich zunächst mit dem derzeitigen und zukünftigen Einsatz von Social Software in Unternehmen. Nach dem großen Erfolg von Social Software im Web beginnen viele Unternehmen eigene Social Software-Initiativen zu entwickeln. Der Artikel zeigt die derzeit wahrgenommenen Einsatzmöglichkeiten von Social Software im Unternehmen auf, erörtert Erfolgsfaktoren für die Einführung und präsentiert mögliche Wege für die Zukunft. Nach der Diskussion des Spezialfalles Social Software in Unternehmen werden anschließend die globalen Trends und Zukunftsperspektiven des Web 2.0 in ihren technischen, wirtschaftlichen und sozialen Dimensionen dargestellt. Wie aus den besprochenen Haupttrends hervorgeht, wird die Masse an digital im Web verfügbaren Informationen stetig weiterwachsen. So stellt sich die Frage, wie es in Zukunft möglich sein wird, die Qualität der Informationssuche und der Wissensgenerierung zu verbessern. Mit dem Einsatz von semantischen Technologien im Web wird hier eine revolutionäre Möglichkeit geboten, Informationen zu filtern und intelligente, gewissermaßen verstehende" Anwendungen zu entwerfen. Auf dem Weg zu einem intelligenten Web werden sich das Semantic Web und Social Software annähern: Anwendungen wie Semantic Wikis, Semantic Weblogs, lightweight Semantic Web-Sprachen wie Microformats oder auch kommerzielle Angebote wie Freebase von Metaweb werden die ersten Vorzeichen einer dritten Generation des Webs sein.

  5. Wissenschaft, die unsere Kultur verändert. Tiefenschichten des Streits um die Evolutionstheorie

    NASA Astrophysics Data System (ADS)

    Patzelt, Werner J.

    Die Evolutionstheorie ist eine der erfolgreichsten wissenschaftlichen Theorien. Sie erlaubt es, unsere Herkunft zu verstehen und riskante Merkmale gerade der menschlichen Spezies zu begreifen. Zugleich ist die Evolutionstheorie eine der umstrittensten Theorien. Das liegt nicht an ihrer empirischen Tragfähigkeit, sondern an ihrem Gegenstand. Sie handelt nämlich nicht nur - wie Hunderte andere wissenschaftliche Theorien - von der "Welt da draußen“, sondern vor allem auch von uns selbst und von unserem Platz in dieser Welt. Den einen gilt sie obendrein als Überwinderin religiösen Aberglaubens, den anderen als neuer Zugang zu Gott und seinem Wirken in der Welt. Ferner sehen die einen in der Evolution eine unbezweifelbare Tatsache gleich der Schwerkraft oder dem Holocaust, die anderen aber eine - noch oder dauerhaft - unbewiesene Hypothese oder gar eine falsche Schöpfungslehre. Und während die meisten Streitfragen solcher Art nach wechselseitig akzeptierten Regeln ‚normaler Wissenschaft‘ geklärt werden, wird bei der Frage nach dem Woher unserer Spezies und Kultur die intellektuelle Zuständigkeit von Wissenschaft mitunter überhaupt bezweifelt. Anscheinend geht es schon um recht tiefe Schichten unserer Kultur und nicht nur der wissenschaftlichen, wenn - wie seit 150 Jahren - um die Evolutionstheorie gestritten wird. Wie sehen diese Schichten aus?

  6. Die Herz-Lungen-Maschine

    NASA Astrophysics Data System (ADS)

    Krane, Markus; Bauernschmitt, Robert; Lange, Rüdiger

    Das Kapitel der modernen Herzchirurgie mit Einsatz der Herz-Lungen-Maschine am Menschen beginnt am 6. Mai 1953, als J. Gibbon bei einer 18-jährigen Patientin einen angeborenen Defekt in der Vorhofscheidewand verschließt [1]. Mit ersten experimentellen Versuchen zur extrakorporalen Zirkulation begann Gibbon bereits in den 30er Jahren des 20. Jahrhunderts. Die Grundlage für die heute gebräuchliche Rollerpumpe schufen Porter und Bradley mit ihrer "rotary pump“, welche sie 1855 zum Patent anmeldeten. Diese Pumpe wurde von DeBakey und Schmidt modifiziert und entspricht im Wesentlichen noch der heute sich im Routinebetrieb befindlichen Rollerpumpe [2].

  7. SPHERICAL DIE

    DOEpatents

    Livingston, J.P.

    1959-01-27

    A die is presented for pressing powdered materials into a hemispherical shape of uniforin density and wall thickness comprising a fcmale and male die element held in a stationary spaced relation with the space being equivalent to the wall thickness and defining the hemispherical shape, a pressing ring linearly moveable along the male die element, an inlet to fill the space with powdered materials, a guiding system for moving the pressing ring along the male die element so as to press the powdered material and a heating system for heating the male element so that the powdered material is heated while being pressed.

  8. Herstellung von Chitosan und einige Anwendungen

    NASA Astrophysics Data System (ADS)

    Struszczyk, Marcin Henryk

    2001-05-01

    1. Die Deacetylierung von crabshell - Chitosan führte gleichzeitig zu einem drastischen Abfall der mittleren viscosimetrischen Molmasse ( Mv), insbesondere wenn die Temperatur und die Konzentration an NaOH erhöht werden. Diese Parameter beeinflussten jedoch nicht den Grad der Deacetylierung (DD). Wichtig ist jedoch die Quelle des Ausgangsmaterials: Chitin aus Pandalus borealis ist ein guter Rohstoff für die Herstellung von Chitosan mit niedrigem DD und gleichzeitig hoher mittlerer Mv, während Krill-Chitin (Euphausia superba) ein gutes Ausgangsmaterial zur Herstellung von Chitosan mit hohem DD und niedrigem Mv ist. Chitosan, das aus Insekten (Calliphora erythrocephala), unter milden Bedingungen (Temperatur: 100°C, NaOH-Konzentration: 40 %, Zeit: 1-2h ) hergestellt wurde, hatte die gleichen Eigenschaften hinsichtlich DD und Mv wie das aus Krill hergestellte Chitosan. Der Bedarf an Zeit, Energie und NaOH ist für die Herstellung von Insekten-Chitosan geringer als für crabshell-Chitosan vergleichbare Resultaten für DD und Mv. 2. Chitosan wurde durch den Schimmelpilz Aspergillus fumigatus zu Chitooligomeren fermentiert. Die Ausbeute beträgt 25%. Die Chitooligomere wurden mit Hilfe von HPLC und MALDI-TOF-Massenspektrmetrie identifiziert. Die Fermentationsmischung fördert die Immunität von Pflanzen gegen Bakterien und Virusinfektion. Die Zunahme der Immunität schwankt jedoch je nach System Pflanze-Pathogen. Die Fermentation von Chitosan durch Aspergillus fumigatus könnte eine schnelle und billige Methode zur Herstellung von Chitooligomeren mit guter Reinheit und Ausbeute sein. Eine partiell aufgereinigte Fermentationsmischung dieser Art könnte in der Landwirtschaft als Pathogeninhibitor genutzt werden. Durch kontrollierte Fermentation, die Chitooligomere in definierter Zusammensetzung (d.h. definierter Verteilung des Depolymerisationsgrades) liefert, könnte man zu Mischungen kommen, die für die jeweilige Anwendung eine optimale Bioaktivität besitzen. 3

  9. Klassifikation von Standardebenen in der 2D-Echokardiographie mittels 2D-3D-Bildregistrierung

    NASA Astrophysics Data System (ADS)

    Bergmeir, Christoph; Subramanian, Navneeth

    Zum Zweck der Entwicklung eines Systems, das einen unerfahrenen Anwender von Ultraschall (US) zur Aufnahme relevanter anatomischer Strukturen leitet, untersuchen wir die Machbarkeit von 2D-US zu 3D-CT Registrierung. Wir verwenden US-Aufnahmen von Standardebenen des Herzens, welche zu einem 3D-CT-Modell registriert werden. Unser Algorithmus unterzieht sowohl die US-Bilder als auch den CT-Datensatz Vorverarbeitungsschritten, welche die Daten durch Segmentierung auf wesentliche Informationen in Form von Labein für Muskel und Blut reduzieren. Anschließend werden diese Label zur Registrierung mittels der Match-Cardinality-Metrik genutzt. Durch mehrmaliges Registrieren mit verschiedenen Initialisierungen ermitteln wir die im US-Bild sichtbare Standardebene. Wir evaluierten die Methode auf sieben US-Bildern von Standardebenen. Fünf davon wurden korrekt zugeordnet.

  10. Stabile Expression von Sulfotransferasen - allein oder in Kombination mit Cytochrom P450 - in Zelllinien für Mutagenitätsuntersuchungen

    NASA Astrophysics Data System (ADS)

    Pabel, Ulrike

    2003-10-01

    Aromatische Amine und Amide (aAA) sind aufgrund ihrer starken Verbreitung in der menschlichen Umwelt und ihres kanzerogenen Potenzials von groer toxikologischer Bedeutung. Die Kanzerogenität der aAA wird durch die Mutagenität hochreaktiver Stoffwechselprodukte vermittelt, die in zwei sequenziellen katalytischen Reaktionen entstehen. Die erste ist meistens eine N-Hydroxylierung, die oft durch Cytochrom P450 1A2 (CYP1A2) katalysiert wird. Daran schliet sich eine O-Konjugation durch Sulfotransferasen (SULT) oder N-Acetyltransferasen (NAT) an. Die Bioaktivierung ist ein kritischer Parameter für die Übertragbarkeit von Ergebnissen aus Tiermodellen auf den Menschen. Rekombinante in vitro Systeme, die fremdstoffmetabolisierende Enzyme verschiedener Spezies exprimieren, ermöglichen die vergleichende Untersuchung der Bioaktivierung im Menschen und in Versuchstieren. Ziel des Projektes war die Aufklärung der Bioaktivierung der aAA durch humane Enzyme. Im Vordergrund stand die Untersuchung der Rolle humaner SULT in diesem Prozess. Es wurden rekombinante in vitro Systeme, konstruiert, die CYP1A2 und SULT des Menschen koexprimieren. SULT-cDNAs wurden in den Säugerzell Expressionsvektor pMPSV kloniert und in Standardindikatorzellen für Mutagenitätsuntersuchungen (V79 Zellen aus dem Chinesischen Hamster) transfiziert. Das Expressionsniveau von CYP1A2 und SULT wurde mittels Immunblotanalyse und radiometrischen Aktivitätsmessungen charakterisiert. In den rekombinanten Zellen wurden vier aAA als Modellsubstanzen (2-Acetylaminofluoren, 2-Aminoanthracen, 3′-Methyl-4-dimethylaminoazobenzol, 2,4-Diaminotoluol) auf ihre Mutagenität am hprt-Locus hin untersucht.Die aAA waren in Zellen, die keine rekombinanten Enzyme oder lediglich CYP1A2 exprimierten, nicht mutagen. In Zellen, die CYP1A2 und SULT der Subfamilie 1A koexprimierten, erzeugten sie bereits in geringen Konzentrationen klare mutagene Effekte (0,3 µM für 2-Acetylaminofluoren und 3′-Methyl-4

  11. Quantenphysik Interferometrie von C70-Molekülen

    NASA Astrophysics Data System (ADS)

    Ziegler, Thomas

    2002-05-01

    Interferenzversuche mit Neutronen und schweren Atomen stellen kein großes Problem mehr dar, selbst die Welleneigenschaften von C60-und C70-Molekülen wurden bereits nachgewiesen. Allerdings stößt man bei der Realisation immer feinerer Gitter mit Gitterkonstanten von etwa 100 nm im Fall dieser Moleküle auf technische Probleme. Wissenschaftlern der Universität Wien ist es jüngst gelungen, ein so genanntes Talbot-Lau-Interferometer zu realisieren und die Welleneigenschaften von C70 mit einer bislang unerreichten Qualität nachzuweisen [1].

  12. Renaturierung von Tagebaufolgeflächen

    NASA Astrophysics Data System (ADS)

    Tischew, Sabine

    Der Abbau von Rohstoffen im Tagebauverfahren bedingt einen tief greifenden Landschafts- und Strukturwandel in den betroffenen Regionen. In der Abbauphase hat vor allem der Braunkohleabbau mit den tagebauübergreifenden Grundwasserabsenkungstrichtern, der Zerstörung oder Beeinträchtigung von ausgedehnten naturnahen Auenökosystemen sowie Wäldern und Elementen der Kulturlandschaft aus der Sicht des Naturschutzes überwiegend negative landschaftsökologische Folgen. Vor allem der Eingriff in Ökosysteme mit langen Entwicklungszeiten (alte Wälder, Moore) oder in die Dynamik von Auensystemen ist nicht oder nur in sehr langen Zeiträumen wieder ausgleichbar. Für letztere ist auch langfristig die Durchgängigkeit für viele Tierarten (Arten der Fließgewässer) nicht wieder vollständig herstellbar. Oft ist es zudem schwierig, traditionelle Landnutzungen (z. B. Wanderschäferei, Nutzung von Streuobstwiesen) nach der langen Abbauphase wieder aufzugreifen. Es ist deshalb eine wichtige Aufgabe, nach dem Abbauprozess auf der Grundlage der vorhandenen Potenziale eine nachhaltige Entwicklung der Bergbaufolgelandschaft zu unterstützen und von den Betreibern des Abbaus und von den Sanierungsgesellschaften auch einzufordern (z. B. Bauer 1998).

  13. Die Pugwash Conferences on Science and World Affairs Ein Beispiel für erfolgreiche „Track-II-Diplomacy“ der Naturwissenschaftler im Kalten Krieg

    NASA Astrophysics Data System (ADS)

    Neuneck, Götz

    "Kein Zeitalter der Geschichte ist stärker von den Naturwissenschaften durchdrungen und abhängiger von ihnen als das 20. Jahrhundert" schreibt Eric Hobsbawn im Kapitel "Zauberer und Lehrlinge: Die Naturwissenschaften" seines Buches "Zeitalter der Extreme".

  14. Marathon in All. Die einzigartige Reise des Raumschiffes Voyager 2.

    NASA Astrophysics Data System (ADS)

    Klingholz, R.

    Contents: 1. Die sieben Milliarden Kilometer Tour. 2. Aufbruch ins Unendliche. 3. Wirbelstürme und Vulkane. 4. Der Herr der Ringe. 5. Helden, die keiner braucht. 6. Der Planet der Neuzeit. 7. Von Parkfield zum Pluto. 8. Der blaue Gott der Meere. 9. Ist da wer? 10. Who ist who im Weltall?

  15. Von Humboldt bis Einstein. Berlin als Weltzentrum der exakten Wissenschaften.

    NASA Astrophysics Data System (ADS)

    Meschkowski, H.

    Contents: 1. Die Anfänge. 2. Die Ära Dirichlet-Jacobi. 3. Der Ausbau der experimentellen Naturwissenschaften. 4. Alexander von Humboldt. 5. Berlin wird "Weltzentrum" der Mathematik. 6. Die Ära Helmholtz. 7. Neue Arbeitsweisen der Astronomie. 8. Chemie: Forschung und Industrie. 9. Max Planck. 10. Ins technische Zeitalter. 11. Zur Mathematik der zwanziger Jahre. 12. Albert Einstein. 13. Fortschritte der Grundlagenforschung. 14. Erwin Schrödinger: Physiker, Philosoph und Poet. 15. Zum Schluß.

  16. Konstruieren von Pkw-Karosserien: Grundlagen, Elemente und Baugruppen, Vorschriftenübersicht, Beispiele mit CATIA V4 und V5

    NASA Astrophysics Data System (ADS)

    Grabner, Jörg; Nothhaft, Richard

    Die Faszination, die vom Auto ausgeht, ist und bleibt ungebrochen. Entsprechend interessant ist es, sich vor dem Hintergrund konventioneller Konstruktionstechniken über die virtuelle Produktentwicklung von Pkw-Karosserien an modernen CAD-Arbeitsplätzen informieren zu können. Die Autoren führen in die Grundlagen ein und zeigen anhand von Beispielen und zahlreichen Abbildungen, wie mit dem System CATIA der Rohbau sowie die Ausstattung innen und au=C3=9Fen konstruiert werden. Darüber hinaus wird das so genannte "Package" an Beispielen beschrieben, also das Management und die Harmonisierung der Anforderungen an die Bauräume (z.

  17. Ein stochastisches Modell zur Beschreibung von Signalen in digitalen Schaltungen basierend auf quadratischer Optimierung

    NASA Astrophysics Data System (ADS)

    Kleeberger, V. B.; Maier, P.; Schlichtmann, U.

    2013-07-01

    Die kontinuierlich fortschreitende Miniaturisierung in integrierten Schaltungen führt zu einem erhöhten Modellierungsbedarf verschiedenster Effekte, wie z.B. Alterung oder Stromverbrauch. Diese hängen von den auftretenden Signalen innerhalb der Schaltung ab, wodurch deren statistische Modellierung ein zentrales Problem darstellt. Dieser Beitrag stellt eine neue Methode zur stochastischen Signalmodellierung basierend auf quadratischer Optimierung vor. Die Methode wird mit Hilfe von realen Daten mit existierenden Ansätzen verglichen. Die Testergebnisse zeigen hierbei im vorgestellten Modell einen Genauigkeitszuwachs von bis zu einem Faktor 10 im Vergleich zu bereits existierenden Modellen.

  18. Von eingebetteten Systemen zu Cyber-Physical Systems

    NASA Astrophysics Data System (ADS)

    Wedde, Rorst F.; Lehnhoff, Sebastian; Rehtanz, Christian; Krause, Olav

    Das Hauptanliegen des Papiers ist, ein Paradigma für Probleme mit neuartigen Integrationsanforderungen für Forschung und Entwicklung in verteilten eingebetteten Echtzeitsystemen zu motivieren und vorzustellen, nämlich den Begriff Cyber-Physical Systems. Bei einer in letzter Zeit stark zunehmenden Anzahl von Realzeitanwendungen können ohne die Berücksichtigung solcher Forderungen keine praktisch brauchbaren Lösungen erwartet werden. Einige Anwendungsfelder werden angesprochen. Im Einzelnen werden dann für Elektroautos, die mit erneuerbaren Energien betrieben werden sollen, einerseits die Management-, verteilte Verhandlungs- und Verteilungsprobleme der benötigten Energie in einem bottom-up Ansatz gelöst. Andererseits wird als Teil unserer Projektarbeit die Bereitstellung von Reserveenergie für den allgemeinen Bedarf durch Autobatterien vorgestellt. Es zeigt sich, dass dies effizienter und wesentlich kurzfristiger in unserem verteilten Vorgehen geschehen kann als in traditionellen Verfahren.

  19. Hepatologie Neuere Forschungsergebnisse in ihrer Bedeutung für das Verständnis von Leberkrankheiten

    NASA Astrophysics Data System (ADS)

    Gerok, W.; Blum, H. E.; Offensperger, W.; Offensperger, S.; Andus, T.; Groß, V.; Heinrich, P. C.

    1991-06-01

    By two exemplary clinical situations — acute viral hepatitis, acute-phase reaction of the liver — the significance of basic research for the understanding of clinical phenomena and for the development of new diagnostic and therapeutic procedures is demonstrated. The very different phenomena following infection with the hepatitis-B-virus can be explained by the variation in the interactions of virus and liver cell, by the immune reaction of the host, and by mutants of the virus. The reaction of the liver to an extrahepatic infection is mediated by interleukin-6, and characterized by an alteration in protein metabolism. The synthesis of acute-phase proteins is increased. The proteins confine the local injury and establish the homeostasis of the organism.

  20. Vergleichende Ultrastrukturuntersuchungen der Eu- und Paraspermien von 13 Protodrilus-Arten (Polychaeta, Annelida) und ihre taxonomische und phylogenetische Bedeutung

    NASA Astrophysics Data System (ADS)

    von Nordheim, Henning

    1989-06-01

    The morphology of the slender, filiform spermatozoa of 13 Protodrilus species of 22 different populations is investigated by light and transmission electron microscopy. All species have two types of spermatoza: fertile euspermatozoa, and paraspermatozoa, which are probably infertile and may comprise up to 20% of the total number of mature gametes. This is the first record of sperm dimorphism in polychaetes. The general construction pattern of the euspermatozoa is very complex. It shows a longish tapering acrosomal vesicle with an internal acrosomal rod, a rod-like conical nucleus, and a midpiece with numerous very complex supporting elements and two thin mitochondrial derivatives. Further, it has a ‘peribasal body’ surrounding the basal body of the axoneme, an anulus region with an ‘anchoring apparatus’ and an anulus cuff. Posteriorly, the tail region proper contains in some species 2 to 9 supporting rods. In several species the euspermatozoon shows very distinct and species-specific alternations of this ‘general pattern’ relating to e.g. size of sperm elements, structure of acrosome and nucleus, presence or absence of axial rod, and number, shape and size of supporting elements in midpiece and tail. In a number of species some sections of the euspermatozoon overlap with each other more or less strongly. The paraspermatozoon has a comparatively simple construction pattern and possesses no supporting structures in midpiece and tail region. The midpiece is very short and, in some species, entirely surrounded by its two thin and elongate mitochondrial derivatives. An axial rod is often missing or reduced; different sperm sections never overlap each other. In contrast to the euspermatozoa, the paraspermatozoa of the different species have a very similar ultrastructure. Their possible function in spermatophore transfer and histolytical opening of the female epidermis is discussed. A comparison of the different forms of euspermatozoa in Protodrilus elucidates possible plesiomorphous and apomorphous sperm traits. Very likely, the hypothetical plesiomorphous type of spermatozoa in Protodrilus has a very similar morphology to that of the paraspermatozoa, which for this reason are considered to be a sort of persisting representatives of the ancient Protodrilus sperm type. In Protodrilus, the different traits of the euspermatozoa represent excellent taxonomic characters for distinguishing species (e.g. ‘sibling species’). They can also be used well for phylogenetics within the genus, whereas the relations of Protodrilus to other polychaete groups cannot be clarified solely on the basis of sperm characters, since in all groups the sperm structure is primarily an adaptation to a specific mode of reproduction. Generally, the value of sperm characters in phylogenetic considerations at higher taxonomic levels seems to be very limited due to the surprisingly wide range of different sperm structures within a single genus as is demonstrated in the present paper.

  1. Sinn und Möglichkeiten der Theoretischen Physik. Zum 300. Jahrestag von Newtons Philosophiae Naturalis Principia Mathematica

    NASA Astrophysics Data System (ADS)

    Rompe, R.; Thiessen, P. A.; Treder, H.-J.

    Die Newtonschen Prinzipien und die aus ihnen gewonnene Erkenntnis der Existenz von Elementarkonstanten nach Planck, Einstein und Bohr erweisen sich zunehmend als tragfähiges Fundament nicht nur der Physik und ihrer Anwendung in der Technik, sondern überhaupt aller exakten Wissenschaften in breitestem Sinne des Wortes.Die physikalisch inhaltliche Klärung der Begriffe erfolgt seit Newton in engem Verbund mit der Entwicklung mathematischer Methoden. Diese Kombination erweist sich weiterhin als produktiv und sichert den Fortschritt der Physik und der exakten Wissenschaften.Wohl alle Probleme, die im Bereich der Technik Bedeutung haben können, lassen sich bei entsprechendem Aufwand bereits mit dem vorhandenen Fundus an Erkenntnissen und Methoden erfolgreich angehen.Der in der Wirklichkeit verankerte Zusammenhang von Gesetz und Zufall erweist sich als eine Manifestation der Dialektik in der Natur. Es gibt keinen absoluten Zufall. Sie kommt in allen Zweigen der Physik, nicht nur in der Thermodynamik und Quantenphysik, zutage, und muß bereits auf dem Niveau der Newtonschen Prinzipien und der Elementarkonstanten behandelt werden.Die theoretische Physik, so wie sie von Newton initiiert worden ist, wurde so angelegt, daß sie alle Seiten der Wirklichkeit, so weit sie in die Kompetenz der Physik fallen, umfaßt. Es besteht darum kein Gegensatz zwischen der klassischen Physik und der Quantenphysik. Es handelt sich lediglich um eine Differenzierung nach den unterschiedlichen physikalischen Inhalten und den angemessenen mathematischen Methoden, die natürlich von der Wahl der Probleme abhängen.Die theoretische Physik stellt eine allgemein zugängliche Zusammenfassung des gesicherten Wissens der Physik dar, das zugleich das Fundament der exakten Wissenschaften ist.Die theoretische Physik ist damit das Mittel der Verständigung innerhalb der Kooperation, die notwendig ist zur Lösung der großen komplexen Aufgaben der Wissenschaft und Technik.

  2. Dr. Wernher Von Braun

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Dr. Wernher von Braun with Dr. Eberhard Rees and R.W. Cook at a press conference concerning Dr. Von Braun's assignment to NASA headquarters and Dr. Rees' subsequent assignment as Marshall Center director.

  3. Herschel und die Zukunft der Fern-Infrarot-Astronomie

    NASA Astrophysics Data System (ADS)

    Linz, Hendrik

    2015-06-01

    Schon lange ist die beobachtende Astronomie den engen Grenzen des optisch Sichbaren entwachsen und hat fast alle Bereiche des elektromagnetischen Spektrums für sich dienstbar gemacht. Im sogenannten nahen und mittleren Infrarot (Wellenlängen zwischen 1-30 μm) sowie im Millimeter- und Radio-Regime (Wellenlängen zwischen 1 mm und 10 m) ist die Erdatmosphäre relativ gut durchlässig für elektromagnetische Signale oder hat zumindest eine Vielzahl von spektral begrenzten Transmissionsfenstern, die astronomische Beobachtungen zumindest von höheren Bergen aus möglich machen. Allerdings ist das sogenannte Ferne Infrarot (FIR, 30-300 μm Wellenlänge) von der Erde aus fast völlig unzugänglich für astronomische Beobachtungen. Selbst für die besten Beobachtungsplätze der Erde bleibt die atmosphärische Transmission durch die immense Wasserdampf- Absorption auf ein absolutes Minimum beschränkt. Jedoch erlaubt uns das FIR Zugang zu Informationen, die sehr nützlich sind für die astrophysikalische Forschung und komplementär zu anderen Wellenlängen-Bereichen.

  4. Neuere Untersuchungen zur Prädiktion von EEG-Signalen bei Epilepsie

    NASA Astrophysics Data System (ADS)

    Niederhöfer, C.; Tetzlaff, R.

    2007-06-01

    Seit einigen Jahren ist die Analyse von EEG-Signalen bei Epilepsie Gegenstand zahlreicher wissenschaftlicher Arbeiten; Zielvorstellung ist dabei die Entwicklung von Verfahren zur Erkennung eines möglichen Voranfallszustandes. Im Vordergrund steht beispielsweise die Approximation einer so genannten effektiven Korrelationsdimension, die Bestimmung der maximalen Lyapunov-Exponenten, Detektionsverfahren für Muster bei Zellularen Nichtlinearen Netzwerken, die Bestimmung der mittleren Phasenkohärenz und Verfahren zur nichtlinearen Prädiktion von EEG-Signalen. Trotz umfangreicher Bemühungen kann bis heute eine Erkennung von Anfallsvorboten mit einer Sensitivität und Spezifität, die eine automatisierte Anfallsvorhersage ermöglichen würde, noch nicht durchgeführt werden. In diesem Beitrag werden neue Ergebnisse zur Prädiktion von EEG-Signalen bei Epilepsie vorgestellt. Dabei werden Signale, welche mittels intrakranieller electrocorticographischer (ECoG) und stereoelectroencephalographischer (SEEG) Ableitungen registriert wurden, segmentweise analysiert. Unter der Annahme, dass sich Änderungen des Systems ,,Gehirn" als Änderungen im Prädiktor, d.h. in seinen Systemparametern widerspiegeln, könnte eine nähere Betrachtung der Prädiktoreigenschaften zu einer Erkennung von Anfallsvorboten führen.

  5. Sputtered protective coatings for die casting dies

    NASA Technical Reports Server (NTRS)

    Mirtich, M. J.; Nieh, C. Y.; Wallace, J. F.

    1981-01-01

    This investigation determined whether selected ion beam sputtered coatings on H-13 die steel would have the potential of improving the thermal fatigue behavior of the steel used as a die in aluminum die casting. The coatings were selected to test candidate insulators and metals capable of providing protection of the die surface. The studies indicate that 1 micrometer thick W and Pt coatings reduced the thermal fatigue more than any other coating tested and are candidates to be used on a die surface to increase die life.

  6. Renaturierung und Management von Heiden

    NASA Astrophysics Data System (ADS)

    Härdtle, Werner; Assmann, Thorsten; van Diggelen, Rudy; von Oheimb, Goddert

    Heiden zählen zu den ältesten und besonders reizvollen Kulturlandschaften Nordwesteuropas. Sie sind bezeichnend für nährstoffarme Böden in wintermilden Gebieten mit hohen Sommerniederschlägen. Während Heiden vor wenigen Jahrhunderten noch weit verbreitet und für manche Landschaften sogar prägend waren, hat sich ihr Areal heute auf wenige, meist in Naturschutzgebieten gelegene Restbestände verkleinert. Zu diesem Rückgang haben maßgeblich Änderungen der Landnutzung, aber auch Nährstoffeinträge aus umgebenden Agrarflächen und atmogene Depositionen beigetragen. In den meisten Ländern der Europäischen Union sind Heiden heute gesetzlich geschützte Ökosysteme, da diese, neben ihrem Erholungswert für den Menschen, Pflanzen- und Tierarten beherbergen, die außerhalb von Heiden nicht oder kaum überlebensfähig sind.

  7. Renaturierung von subalpinen und alpinen Ökosystemen

    NASA Astrophysics Data System (ADS)

    Krautzer, B.; Klug, Brigitte

    Die große Vielfalt an alpinen und subalpinen Ökosystemen auf waldfreien Standorten stellt besonders hohe Anforderungen an Planung und Durchführung von Renaturierungsmaßnahmen. Zunehmende Meereshöhe, starke Hangneigungen und extreme klimatische Verhältnisse im Gebirge bedingen zudem seit jeher natürliche Erosionsprozesse. Die zahllosen menschlichen Aktivitäten der letzten Jahrzehnte, gepaart mit unzureichenden Begrünungsmaßnahmen, erhöhen dieses Risiko noch um ein Vielfaches: Geländekorrekturen im Zuge von Skipistenbauten, Almrevitalisierungen, Forst- und Almwegebauten, Maßnahmen zur Verbesserung der touristischen Infrastruktur oder Wildbach- und Lawinenverbauungen. Nur durch Verwendung von hochwertigem, dem Standort angepasstem Pflanzen-oder Saatgutmaterial in Kombination mit der passenden Begrünungstechnik kann dieser Bedrohung dauerhaft entgegengewirkt werden. Dabei sind folgende limitierende Faktoren besonders zu beachten.

  8. Zelltyp-spezifische Mikroanalyse von Arabidopsis thaliana-Blättern

    NASA Astrophysics Data System (ADS)

    Brandt, Stephan Peter

    2002-04-01

    Im ersten Teil der Arbeit wurden Strategien zur Analyse von Transkripten erarbeitet. Die ersten Versuche zielten darauf ab, in mit Glaskapillaren genommenen Einzelzellproben verschiedener Gewebeschichten RT-PCR durchzuführen, um spezifische Transkripte nachweisen zu können. Dies gelang für eine Reihe von Genen aus verschiedenen Pflanzenspezies. Dabei konnten sowohl Transkripte stark wie auch schwach exprimierter Gene nachgewiesen werden. Für die Erstellung von Gewebe-spezifischen Expressionsprofilen war es notwendig, die in vereinigten Zellproben enthaltene mRNA zunächst zu amplifizieren, um eine ausreichende Menge für Arrayhybridisierungen zu erhalten. Vor der Vermehrung wurde die mRNA revers transkribiert. Es wurden daran anschließend verschiedene Amplifikationsstrategien getestet: Die neben Tailing, Adapterligation und anderen PCR-basierenden Protokollen getestete Arbitrary-PCR hat sich in dieser Arbeit als einfache und einzige Methode herausgestellt, die mit so geringen cDNA-Mengen reproduzierbar arbeitet. Durch Gewebe-spezifische Array-hybridisierungen mit der so amplifizierten RNA konnten schon bekannte Expressionsmuster verschiedener Gene, vornehmlich solcher, die an der Photosynthese beteiligt sind, beobachtet werden. Es wurden aber auch eine ganze Reihe neuer offensichtlich Gewebe-spezifisch exprimierter Gene gefunden. Exemplarisch für die differentiell exprimierten Gene konnte das durch Arrayhybridisierungen gefundene Expressionsmuster der kleinen Untereinheit von Rubisco verifiziert werden. Hierzu wurden Methoden zum Gewebe-spezifischen Northernblot sowie semiquantitativer und Echtzeit-Einzelzell-RT-PCR entwickelt. Im zweiten Teil der Arbeit wurden Methoden zur Analyse von Metaboliten einschließlich anorganischer Ionen verwendet. Es stellte sich heraus, daß die multiparallele Methode der Gaschromatographie-Massenspektrometrie keine geeignete Methode für die Analyse selbst vieler vereinigter Zellinhalte ist. Daher wurde auf

  9. Zuverlässigkeit digitaler Schaltungen unter Einfluss von intrinsischem Rauschen

    NASA Astrophysics Data System (ADS)

    Kleeberger, V. B.; Schlichtmann, U.

    2011-08-01

    Die kontinuierlich fortschreitende Miniaturisierung in integrierten Schaltungen führt zu einem Anstieg des intrinsischen Rauschens. Um den Einfluss von intrinsischem Rauschen auf die Zuverlässigkeit zukünftiger digitaler Schaltungen analysieren zu können, werden Methoden benötigt, die auf CAD-Verfahren wie Analogsimulation statt auf abschätzenden Berechnungen beruhen. Dieser Beitrag stellt eine neue Methode vor, die den Einfluss von intrinsischem Rauschen in digitalen Schaltungen für eine gegebene Prozesstechnologie analysieren kann. Die Amplituden von thermischen, 1/f und Schrotrauschen werden mit Hilfe eines SPICE Simulators bestimmt. Anschließend wird der Einfluss des Rauschens auf die Schaltungszuverlässigkeit durch Simulation analysiert. Zusätzlich zur Analyse werden Möglichkeiten aufgezeigt, wie die durch Rauschen hervorgerufenen Effekte im Schaltungsentwurf mit berücksichtigt werden können. Im Gegensatz zum Stand der Technik kann die vorgestellte Methode auf beliebige Logikimplementierungen und Prozesstechnologien angewendet werden. Zusätzlich wird gezeigt, dass bisherige Ansätze den Einfluss von Rauschen bis um das Vierfache überschätzen.

  10. Dr. Wernher Von Braun

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Dr. Wernher Von Braun (left) and Fred W. Kelley examine a ST-100 Stellar Instrument Platform in the astrionics lab. Dr. Von Braun, then deputy associate administrator for planning, NASA, was visiting on the anniversary of the establishment of the Marshall Space Flight Center.

  11. Dr. Wernher Von Braun

    NASA Technical Reports Server (NTRS)

    1968-01-01

    Dr. Wernher Von Braun, stands in front of a Saturn IB Launch Vehicle at Kennedy Space Center (KSC). Dr. Von Braun was Marshall's first Center Director (1960-1970). Under his leadership Marshall was responsible for the development of the Saturn rockets, the Skylab project and getting the United States into Space and landing on the moon with the Apollo missions.

  12. Kernschmelze Der nachhaltige Einfluss von Nuklearwaffen auf Politik und Wirtschaft

    NASA Astrophysics Data System (ADS)

    Greiner, Bernd

    "Was sollen wir von einer Kultur halten, der die Ethik stets als wesentliches Element des menschlichen Lebens galt, die aber - außer in fachlicher oder spieltheoretischer Terminologie - nicht in der Lage war, über die Möglichkeit zu sprechen, nahezu alle Menschen zu töten?" Der Fragesteller gehört zu den berühmtesten Physikern des 20. Jahrhunderts und zu den nach wie vor Umstrittensten. über ihn wurde in den 1960er Jahren ein international viel beachtetes Theaterstück geschrieben, vor wenigen Jahren gar eine Oper.

  13. Dr. Wernher von Braun

    NASA Technical Reports Server (NTRS)

    2004-01-01

    Dr. von Braun is looking out from a 10th floor window of building 4200 at the Marshall Space Flight Center (MSFC). He was the first Center Director and served as the Director from July 1960 through February 1970. Following World War II, Dr. von Braun and his German colleagues arrived in the United States under the Project Paperclip (American acquisition of German rocket experts) to continue their rocket development work. In 1950, von Braun and his German Rocket Team (also called the Peenemuende Team) were transferred from Ft. Bliss, Texas to Huntsville, Alabama to work for the Army's rocket program at Redstone Arsenal and later, NASA's Marshall Space Flight Center (MSFC). Under Dr. von Braun's leadership, MSFC developed the Saturn V launch vehicle, which placed the first men, two American astronauts, on the Moon. Wernher von Braun's life was dedicated to expanding man's knowledge through the exploration of space.

  14. Matthias Falter und die frühe Halbleitertechnik in der DDR

    NASA Astrophysics Data System (ADS)

    Dittmann, Frank

    Nach einer ganzen Reihe von Vorarbeiten weltweit1 konnten im Dezember 1947 die amerikanischen Physiker Walter H. Brattain, John Bardeen und William Shockley in den Bell Laboratories den Transistoreffekt demonstrieren. Damit legten sie den Grundstein für die Mikroelektronik als Basistechnologie des Informationszeitalters.

  15. IntegraTUM Teilprojekt E-Mail: Rezentralisierung von E-Mail-Services

    NASA Astrophysics Data System (ADS)

    Diehn, Max; Haarer, Ado; Schreiner, Alexander; Storz, Michael

    Das Teilprojekt E-Mail hatte ursprünglich die Aufgabe einen zentralen Mailservice mit verteilter Administration der Mailadressen für die TUM aufzubauen und diesen durch Anti-Spam- und Anti-Viren-Maßnahmen zu schützen. Auf diesen Mailservice sollten sowohl die am LRZ gehosteten Maildomains als auch die vielen lokal betriebenen Mailserver - soweit von deren Betreibern gewünscht - migriert werden. Neben einigen Rückschlägen und Hindernissen kam es im Laufe des Projektes auch zu einer Änderung der Anforderungen, sodass zum Ende des Projektes statt eines reinen Mailsystems ein Doppelsystem mit "shared SMTP address space" bestehend aus einem klassischen Message-Store mit POP/IMAP-Zugriff auf Basis von Postfix + Dovecot und einem Groupware-System auf Basis von Microsoft Exchange in Produktion ging, wobei jeder Mitarbeiter und Student der TUM wählen kann, auf welchem der beiden Systeme sich seine Mailbox befindet.

  16. Stufenweise Integration von eLearning an der Technischen Universität München

    NASA Astrophysics Data System (ADS)

    Pätzold, Sebastian; Graf, Stephan; Gergintchev, Ivan; Pongratz, Hans; Rathmayer, Sabine

    Der vorliegende Beitrag beschreibt als Best Practice Beispiel die stufenweise Integration eines Learning Management Systems (LMS) in die Infrastruktur von Information und Kommunikation (IuK) der Technischen Universität München (TUM). Dabei wird sowohl die Konsolidierung mehrfach angebotener Funktionalitäten und Dienste in den verschiedenen Portalen der Universität als auch die sukzessive Optimierung der Abläufe aufgezeigt. Gleichzeitig wird auf zukünftige weitere Entwicklungen hin zu einer vollständigen Integration der IuK, aber auch auf die Probleme in den unterschiedlichen Stadien der Entwicklung eingegangen.

  17. Untersuchung der Störwirkung von LTE auf SRD Anwendungen bei 868 MHz

    NASA Astrophysics Data System (ADS)

    Welpot, M.; Wunderlich, S.; Gaspard, I.

    2014-11-01

    Moderne Hausautomatisierungssysteme, Alarmanlagen oder auch Funk-Zugangssysteme in Haus und Automobil setzen auf frei nutzbare Frequenzen in ISM/SRD-Bändern. Die rasante Zunahme an privaten und kommerziell genutzten Applikationen im SRD-Band bei 868 MHz und der Ausbau der LTE-Mobilfunknetze im Frequenzbereich unterhalb von 1 GHz ("Digital Dividend") wirft zunehmend die Frage nach der Funkverträglichkeit dieser Systeme untereinander auf. Während die SRD-Funkmodule auf eine geringe Sendeleistung von ~ +14 dBm beschränkt sind (Ralf and Thomas, 2009), beträgt die maximale LTE-Sendeleistung im Uplink nach (ETSI-Norm, 2011) +23 dBm. Zusammen mit der Einführung von LTE im Frequenzbereich unterhalb 1 GHz als DSL-Ersatz vor allem in ländlichen Gebieten, ergibt sich damit als mögliches Störszenario, dass durch die Aussendung des LTE-Endgerätes im Bereich von ca. 850 MHz die SRD-Funkverbindungen bei 868 MHz insbesondere dann gestört werden, wenn die Antennen beider Funksysteme räumlich nahe zueinander angeordnet sind und folglich nur eine geringe zusätzliche Entkopplung der Systeme bieten. In der vorliegenden Arbeit wird das LTE-Störpotential auf SRD-Empfänger praxisnah untersucht.

  18. Identifikationsverfahren zur Analyse von EEG-Signalen bei Epilepsie mit Reaktions-Diffusions Netzwerken

    NASA Astrophysics Data System (ADS)

    Gollas, F.; Tetzlaff, R.

    2007-06-01

    Partielle Differentialgleichungen des Reaktions-Diffusions-Typs beschreiben Phänomene wie Musterbildung, nichtlineare Wellenausbreitung und deterministisches Chaos und werden oft zur Untersuchung komplexer Vorgänge auf den Gebieten der Biologie, Chemie und Physik herangezogen. Zellulare Nichtlineare Netzwerke (CNN) sind eine räumliche Anordnung vergleichsweise einfacher dynamischer Systeme, die eine lokale Kopplung untereinander aufweisen. Durch eine Diskretisierung der Ortsvariablen können Reaktions-Diffusions-Gleichungen häufig auf CNN mit nichtlinearen Gewichtsfunktionen abgebildet werden. Die resultierenden Reaktions-Diffusions-CNN (RD-CNN) weisen dann in ihrer Dynamik näherungsweise gleiches Verhalten wie die zugrunde gelegten Reaktions-Diffusions-Systeme auf. Werden RD-CNN zur Identifikation neuronaler Strukturen anhand von EEG-Signalen herangezogen, so besteht die Möglichkeit festzustellen, ob das gefundene Netzwerk lokale Aktivität aufweist. Die von Chua eingeführte Theorie der lokalen Aktivität Chua (1998); Dogaru und Chua (1998) liefert eine notwendige Bedingung für das Auftreten von emergentem Verhalten in zellularen Netzwerken. Änderungen in den Parametern bestimmter RD-CNN könnten auf bevorstehende epileptische Anfälle hinweisen. In diesem Beitrag steht die Identifikation neuronaler Strukturen anhand von EEG-Signalen durch Reaktions-Diffusions-Netzwerke im Vordergrund der dargestellten Untersuchungen. In der Ergebnisdiskussion wird insbesondere auch die Frage nach einer geeigneten Netzwerkstruktur mit minimaler Komplexität behandelt.

  19. Einstellung und Wissen von Lehramtsstudierenden zur Evolution - ein Vergleich zwischen Deutschland und der Türkei

    NASA Astrophysics Data System (ADS)

    Graf, Dittmar; Soran, Haluk

    Es wird eine Untersuchung vorgestellt, in der Wissen und Überzeugungen von Lehramtsstudierenden aller Fächer zum Thema Evolution an zwei Universitäten in Deutschland und der Türkei erhoben worden sind. Die Befragung wurde in Dortmund und in Ankara durchgeführt. Es stellte sich heraus, dass ausgeprägte Defizite im Verständnis der Evolutionsmechanismen herrschen. Viele Studierende, insbesondere aus der Türkei, sind nicht von der Faktizität der Evolution überzeugt. Dies gilt sowohl für Studierende mit Fach Biologie als auch für Studierende mit anderen Fächern. Näher untersucht worden sind die Faktoren, die die Überzeugungen zur Evolution beeinflussen können, was ja in Anbetracht der hohen Ablehnungsrate der Evolution von besonderem Interesse ist. Das Vertrauen in die Wissenschaft spielt hierbei eine besondere Rolle: Wer der Wissenschaft vertraut, ist auch eher von der Evolution überzeugt, als diejenigen, die skeptisch gegenüber der Wissenschaft sind.

  20. Die Meteoritenkrater von Morasko in der VR Polen.

    NASA Astrophysics Data System (ADS)

    Classen, J.

    Already in 1914, in Morasko near Poznań an iron meteorite was found. Soon followed further discoveries. In 1955, in the literature were announced seven crater-similar structures which are situated in the neighbourhood of the discovery places. The newest investigations let no doubt that the meteorite discoveries and the craters can be attributed to one and the same event, i.e. to the fall of a great meteorite shower.

  1. Renaturierung von Fließgewässern

    NASA Astrophysics Data System (ADS)

    Lüderitz, Volker; Jüpner, Robert

    Beim Umgang mit den Gewässern wurde der wasserbaulichen Durchsetzung bestimmter Nutzungsansprüche, vor allem der Landwirtschaft, dem Hochwasserschutz, der Wassergewinnung, der Schifffahrt und der Energiegewinnung über Jahrhunderte absoluter Vorrang vor den Belangen des ökologischen Zustandes der Gewässer selbst und damit auch ihrer multifunktionalen Nutzbarkeit eingeräumt. Die daraus resultierenden Umweltauswirkungen wurden oft billigend in Kauf genommen. Gezielte Verbesserungen der ökologischen Situation von Gewässern bzw. Gewässerabschnitten, wie z.B. der Einsatz ingenieurbiologischer Bauweisen oder der Einbau von Fischwanderhilfen an Mühlenstauen, blieben auf Ausnahmen beschränkt.

  2. Dr. Wernher Von Braun

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Dr. Wernher Von Braun (right), Deputy Associate Administrator for planning, National Aeronautics and Space Administration, inspects the mockup of the Saturn Workshop during a visit marking the 10th anniversary of the Marshall Center. Shown with Dr. Von Braun, from left to right, are Karl Heimburg, Director of the astronautics lab; Herman K. Weidner, Director of Science and Engineering, and George Hardy of the Astronautics lab.

  3. Dr. Wernher Von Braun

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Dr. Wernher Von Braun (right), Deputy Associate Administrator for Planning, National Aeronautics and Space Administration, inspects the mockup of the Saturn Workshop during a visit marking the 10th anniversary of the Marshall Center. Shown with Dr. Von Braun, from left to right, are Karl Heimburg, Director of the Astronautics Lab; Herman K. Weidner, Director of Science and Engineering, and George Hardy of the Astronautics Lab.

  4. Einführung in die Technische Chemie

    NASA Astrophysics Data System (ADS)

    Behr, Arno; Agar, David W.; Jörissen, Jakob

    Die "Technische Chemie" ist ein Lehrfach an Universitäten und Hochschulen. Nach dem die Studierenden der Chemie in den ersten Semestern ihres Studiums ausrei chen de theoretische Kenntnisse in Allgemeiner, Anorganischer, Organischer und Physikalischer Chemie erlangt haben, soll die Technische Chemie einen Blick auf die praktische Anwendung dieser Naturwissenschaft in unserer Wirtschaft lenken. Es gibt keine "biologische Industrie", "physikalische Industrie" oder "mathematische Industrie", wohl aber seit über 150 Jahren eine "chemische Industrie", die in dieser lan gen Zeit zahlreiche chemische Prozesse entwickelt und dazu vielfältige Methoden erarbeitet hat. Das Lehrfach Technische Chemie gibt einen Überblick über diese Pro zesse und Methoden und erleichtert dadurch den Schritt von der Universität zur be ruflichen Praxis.

  5. Jahre Entwicklung der Instandhaltung - von der ausfallorientierten Instandhaltung zum gemeinsamen TPM und RCM

    NASA Astrophysics Data System (ADS)

    Iske, Friedhelm

    Zur Einleitung meines Beitrages möchte ich von einem Gespräch mit einem Mitarbeiter berichten, das ich als junger Vorgesetzter einer Instandhaltungsgruppe 1988 führte. Der engagierte Mitarbeiter feierte damals sein vierzigjähriges Dienstjubiläum und war stolz auf das von ihm Geleistete sowie auf den besonderen Einsatz seiner Altersgruppe, die nach dem Zweiten Weltkrieg das Werk wieder aufgebaut hatte. Auf meine Frage, was denn damals die erste Aufgabe in der Firma war, bekam ich kurz und knapp und mit einer Selbstverständlichkeit die selbstbewusste Antwort: "Unser Pferd füttern und mit dem Pferd die innerbetrieblichen Transporte erledigen“. Als junger, technisch orientierter Vorgesetzter war ich über diese Antwort sehr überrascht. Gedanklich weit entfernt war die Vorstellung, dass in der Vergangenheit Transporte mit einem Pferd erledigt wurden.

  6. Displaced capillary dies

    DOEpatents

    Kalejs, Juris P.; Chalmers, Bruce; Surek, Thomas

    1984-01-01

    An asymmetrical shaped capillary die made exclusively of graphite is used to grow silicon ribbon which is capable of being made into solar cells that are more efficient than cells produced from ribbon made using a symmetrically shaped die.

  7. Displaced capillary dies

    DOEpatents

    Kalejs, Juris P.; Chalmers, Bruce; Surek, Thomas

    1982-01-01

    An asymmetrical shaped capillary die made exclusively of graphite is used to grow silicon ribbon which is capable of being made into solar cells that are more efficient than cells produced from ribbon made using a symmetrically shaped die.

  8. Packaged die heater

    SciTech Connect

    Spielberger, Richard; Ohme, Bruce Walker; Jensen, Ronald J.

    2011-06-21

    A heater for heating packaged die for burn-in and heat testing is described. The heater may be a ceramic-type heater with a metal filament. The heater may be incorporated into the integrated circuit package as an additional ceramic layer of the package, or may be an external heater placed in contact with the package to heat the die. Many different types of integrated circuit packages may be accommodated. The method provides increased energy efficiency for heating the die while reducing temperature stresses on testing equipment. The method allows the use of multiple heaters to heat die to different temperatures. Faulty die may be heated to weaken die attach material to facilitate removal of the die. The heater filament or a separate temperature thermistor located in the package may be used to accurately measure die temperature.

  9. Untersuchungen zur Entwicklung von Satellitengalaxien

    NASA Astrophysics Data System (ADS)

    Seidel, Björn

    2002-01-01

    Gleichgewichtsmodelle ein- und zweikomponentiger Satellitengalaxien werden erzeugt und die Gezeiteneinwirkungen der als starres äußeres Potential angenommenen Milchstraße auf sie betrachtet. Eine erste Reihe von Simulationen mit anfänglich kugelsymmetrischen einkomponentigen Satelliten zeigt, daß sich nach elliptischer Deformation ein Balken und Schweife ungleicher Länge ausbilden, deren Aussehen sich periodisch ändert. Mithilfe von Vergleichssimulationen wurden folgende Phänomene am Satelliten entdeckt: (1) Hochdichtebereiche in den Schweifen, (2) Niedrigdichtebereiche um den Kern bzw. Balken und (3) ein oft verdeckter Balken. Analysiert wird das Erscheinungsbild in Zeitabhängigkeit. Die Teilchen gehen dem Kern über den Balken verloren und bewegen sich entlang gewisser stets gleich aussehender charakteristischer Strukturen in die Schweife. Nach einer Herleitung allgemeiner Größen des mehrkomponentigen Kingprofils werden drei stabile Standardmodelle zweikomponentiger Satellitengalaxien mit Massenverhältnis 1:10 (baryonische zu dunkle Materie) und unterschiedlicher Verteilung der dunklen und sichtbaren Materie gefunden. Ohne die Allgemeinheit der Ergebnisse zu beeinträchtigen, wurde dabei die Große Magellanische Wolke als Grundlage der Modelle genommen. Nach geeigneter Wahl der Bahn, zu der der Gezeitenradius des verwendeten dreikomponentigen Milchstraßenpotentials sowohl analytisch als auch numerisch berechnet wird, werden Simulationen der Modelle analysiert. Hauptaugenmerk ist das unterschiedliche Verhalten der Komponenten. Hauptergebnisse: (1) Es ist möglich, große Anteile dunkler, jedoch nur geringe sichtbarer Materie abzulösen. Dunkle und sichtbare Materie können unterschiedliche morphologische Strukturen bilden. (2) Je nach Konzentration der Komponenten ist die Eigengravitation der Teilchen mehr oder weniger für das Aussehen bestimmend. (3) Die Kernauflösung des Satelliten findet im Perigalaktikum (PG), sein Zerfall aber erst im

  10. Sind die klassischen Methoden zur mykologischen Diagnostik noch "State-of-the-Art"?

    PubMed

    Wiegand, Cornelia; Bauer, Andrea; Brasch, Jochen; Nenoff, Pietro; Schaller, Martin; Mayser, Peter; Hipler, Uta-Christina; Elsner, Peter

    2016-05-01

    Die Labordiagnose einer Pilzinfektion der Haut basiert traditionell auf dem Nativpräparat und der Anzucht des Erregers aus dem klinischen Material. Auch der dermato- histologischer Nachweis von Pilzelementen ist möglich. Diese Methoden sind, sofern sie korrekt ausgeführt werden, in der Regel zum Pilznachweis geeignet. Im Zuge der personalisierten Medizin und den daraus erwachsenden Aufgaben werden jedoch neue Verfahren erforderlich, welche einfach, spezifisch und schnell sind. Der zusätzliche Einsatz von DNA-basierten molekularen Methoden erhöht die Empfindlichkeit sowie die diagnostische Spezifität und reduziert die zum Teil wochenlange Durchführungszeit der konventionellen mykologischen Diagnostik auf 24 bis 48 Stunden. Im Zuge der stetigen Weiterentwicklung im Bereich der personalisierten Medizin sind einfache Analysensysteme auf PCR-Basis denkbar, die in der Hautarztpraxis eine Dermatophyten-Sofort-Diagnostik erlauben (Point-of-Care-Tests).

  11. Diagnose und Therapie einer Depression im höheren Lebensalter – Einflüsse von Patienten- und Arztmerkmalen

    PubMed Central

    von dem Knesebeck, Olaf; Bönte, Markus; Siegrist, Johannes; Marceau, Lisa; Link, Carol; McKinlay, John

    2013-01-01

    Zusammenfassung Studienergebnissee aus dem englischsprachigen Raum zeigen, dass diagnostische und therapeutische Entscheidungen von Hausärzten bei der Versorgung von depressiven Patienten systematischen Einflüssen unterliegen, und dass sowohl Merkmale des Arztes als auch des Patienten unabhängig vom Krankheitsbild Einfluss auf diese Entscheidungen haben. In der vorliegenden Arbeit werden Ergebnisse einer deutschen Studie präsentiert, in der die Einflüsse von Patienten- und Arztmerkmalen auf diagnostische und therapeutische ärztliche Entscheidungen bei einer Depression untersucht wurden. Unter Anwendung eines faktoriellen Experimentaldesigns spielten professionelle Schauspieler in Videofilmen die Rolle von Patienten, die Symptome für eine depressive Erkrankung äußern. In den Videofilmen, die alle auf einem identischen Skript basieren, wurden systematisch die Patientenmerkmale Alter (55 vs. 75 Jahre), Geschlecht und sozialer Status (Hausmeister vs. Lehrer) variiert. Die randomisierte Ärztestichprobe wurde nach dem Arztgeschlecht und professioneller Erfahrung (< 5 vs. > 15 Jahre) geschichtet. Der Videofilm wurde insgesamt 128 niedergelassenen Ärzten für Allgemeinmedizin und hausärztlich tätigen Internisten in ihrer Praxis vorgespielt. Danach wurden die Ärzte zu unterschiedlichen Aspekten von Diagnose und Therapie befragt. Es wurde erhoben, ob der Arzt dem Patienten über das gezeigte Gespräch hinausgehende Fragen stellen würde, welche Diagnosen er für wahrscheinlich hält, wie sicher er sich mit seiner Diagnose ist, welche diagnostischen Tests er anordnen würde, ob er den Patienten überweisen würde oder ob er Medikamente verordnen oder ihm Empfehlungen zur Änderung seines Lebensstils geben würde. Die Ergebnisse weisen darauf hin, dass sowohl die Diagnose als auch die Therapie einer Depression durch niedergelassene Hausärzte in Deutschland nur geringfügig durch die untersuchten Merkmale der Patienten und der behandelnden Ärzte beeinflusst wird

  12. HIGH PRESSURE DIES

    DOEpatents

    Wilson, W.B.

    1960-05-31

    A press was invented for subjecting specimens of bismuth, urania, yttria, or thoria to high pressures and temperatures. The press comprises die parts enclosing a space in which is placed an electric heater thermally insulated from the die parts so as not to damage them by heat. The die parts comprise two opposed inner frustoconical parts and an outer part having a double frustoconical recess receiving the inner parts. The die space decreases in size as the inner die parts move toward one another against the outer part and the inner parts, though very hard, do not fracture because of the mode of support provided by the outer part.

  13. [Harmony in dying].

    PubMed

    Meyer, H

    1990-02-13

    Dying and death have scarcely before our time preoccupied so many. Some even seem to thrive from thanatology. Do we physicians however consecrate patience and time to the dying of our next or our patients? Did we learn in medical school or with our patients to assist a dying person? Did we search for answers to death and dying by asking philosophers, physicians or musicians? Can we follow their reasoning in profit for our patients or for ourselves? Harmony in death can possibly be found in a harmonious life in our splendid and humane profession. Modest personal experience enriched by reflections tries imperfectly to bring harmony as hope to our dying.

  14. Renaturierung von Sandökosystemen im Binnenland

    NASA Astrophysics Data System (ADS)

    Schwabe-Kratochwil, Angelika; Kratochwil, Anselm

    Das Vorkommen von Sandökosystemen im Binnenland (Flugsand- und Decksandfelder, Dünen) ist vor allem an Sand-Akkumulationen der vorletzten Eiszeit (in Nordeuropa: Saaleeiszeit und Sand-Ablagerungen an größeren Flüssen gebunden. So finden wir die Verbreitungsschwerpunkte von binnenländischen Sandökosystemen in Mitteleuropa einerseits vor allem im Bereich der flächenhaften saalezeitlichen Ablagerungen in den Niederlanden und in Norddeutschland (Castel et al. 1989), andererseits kommen Sandökosysteme des Binnenlandes linear in den Flussgebieten z.B. von Maas, Rhein, Ems, Elbe, Oder und Regnitz vor. In Niederösterreich fanden sich einst großflächige Dünen- und Flugsandgebiete im Marchfeld östlich von Wien (Wiesbauer et al. 1997). Die Flugsandbildung setzte bereits im Spätglazial ca. 11000 v. Chr. ein, als eine den Sand fixierende Vegetation noch fehlte. Es bildeten sich im norddeutschen Raum aus den leicht verwehbaren Talsanden bereits um 9000 v. Chr.

  15. Die Metamorphose des Polypen von Tripedalia cystophora (Cubozoa, Carybdeidae) in die Meduse

    NASA Astrophysics Data System (ADS)

    Werner, B.

    1983-09-01

    The life cycle of the Cubozoa is unique due to the complete metamorphosis of the sessible solitary polyp into one single medusa which starts a pelagic way of life. Contrary to the other metagenetic classes of Scyphozoa and Hydrozoa, the cubozoan polyp terminates its polypoid existence definitely when it metamorphosizes. Generally, the metamorphosis of the cubopolyp is characterized by the transformation of its simple, sac-like multiradial body into the tetraradial structures of the much more complicated medusa. The macroscopic phases of the metamorphosis of Tripedalia cystophora Conant are reviewed, and the internal developmental processes which effect and underlie the transformation are described in detail from new histological investigations. Only the oral pole of the polyp is involved in the active processes of transformation whereas the basal pole follows in a more passive way. The most important process is the invagination of a quadrangular furrow around the hypostome of the polyp by which (a) the subumbrellar room (bell cavity) of the developing medusa is formed, and (b) the four gastric pockets within the wall of the bell are folded off from the polyp's simple stomach. The description of the metamorphosis on the whole and the detailed comparison of the principal developmental processes provide evidence that medusa formation of Cubozoa is different from that of the other metagenetic classes of Scyphozoa and Hydrozoa. The systematic and evolutionary consequences as well as general aspects of medusa formation in the phylum Cnidaria are discussed in detail. In conclusion, the pelagic medusa generation has been “invented” by the ancestors of the recent metagenetic cnidarian classes three times independently.

  16. Dr. Wernher Von Braun

    NASA Technical Reports Server (NTRS)

    1999-01-01

    A camerman catches Dr. Wernher Von Braun, Director of the Marshall Space Flight Center, his son, Peter, and daughter, Martgrit, as they arrive at the employee picnic held to celebrate man's first landing on the moon 6 days earlier. In the foreground is David R. Newby, Director of Administration and Technical Services at the Marshall Space Flight Center.

  17. Dr. Wernher Von Braun

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Shown viewing the Apollo telescope mockup are, from left to right, Charles Donlan, deputy associate administrator for manned space flight; Dr. Wernher Von Braun, Marshall Space Flight Center director; William Horton, astrionics lab; Dr. Thomas Paine, NASA deputy administrator; Warner Kuers, director of the ME lab.

  18. Dr. Wernher Von Braun

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Marshall Space Flight Center director Wernher Von Braun and his family were honored with a series of events prior to his relocation to Washington, D.C. where he was assigned duties at NASA headquarters as deputy associate administrator for planning. Here he is shown with General Richard Drury and Hazel Toftoy, widow of General H.N. Toftoy.

  19. Dr. Wernher Von Braun

    NASA Technical Reports Server (NTRS)

    1968-01-01

    Dr. Wernher von Braun, Director of the Marshall Space Flight Center, explains the purpose of a thermal curtain in the mockup of a Saturn I workshop to U.S. Representative Armistead Seldon of Alabama. The Congressman visited the Marshall Center on March 2, 1968 to tour the workshop and to visit Marshall Center facilities.

  20. Dr. Wernher Von Braun

    NASA Technical Reports Server (NTRS)

    1968-01-01

    U.S. Representative Armistead Seldon (D.-Al) inspects the food preparation area of the Saturn I workshop mockup during a visit to the Marshall Space Flight Center. Explaining the operation of the food preparation area to the congressman is Dr. Wernher Von Braun, Marshall Space Flight Center director.

  1. Chaos für die Schule!: Nichtlinearität und Strukturbildung

    NASA Astrophysics Data System (ADS)

    Nordmeier, Volkhard; Schlichting, Hans Joachim

    2003-01-01

    Modellsysteme können Schülern die Grundlagen der nichtlinearen Physik anschaulich vermitteln. Sie schlagen so einen Bogen von der Schulphysik zur aktuellen Forschung. Ein solches Modellsystem ist das chaotische Wasserrad, das Lehrer auf einfache Weise für den Schulunterricht nachbauen können. Im Wesentlichen steuert der Zufluss des Wassers das Verhalten des Wasserrads. Wächst er, so durchläuft das Rad von der geordneten, gleichförmigen Drehung bis zum Chaos verschiedene Phasen von Bewegungsfiguren. Das Experiment kann grundlegende Modelle und Begriffe der Chaostheorie demonstrieren: lokale und globale Bifurkationen und verschiedene Übergänge ins Chaos.

  2. Die singulation method

    DOEpatents

    Swiler, Thomas P [Albuquerque, NM; Garcia, Ernest J [Albuquerque, NM; Francis, Kathryn M [Rio Rancho, NM

    2014-01-07

    A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with a HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

  3. Die singulation method

    DOEpatents

    Swiler, Thomas P.; Garcia, Ernest J.; Francis, Kathryn M.

    2013-06-11

    A method is disclosed for singulating die from a semiconductor substrate (e.g. a semiconductor-on-insulator substrate or a bulk silicon substrate) containing an oxide layer (e.g. silicon dioxide or a silicate glass) and one or more semiconductor layers (e.g. monocrystalline or polycrystalline silicon) located above the oxide layer. The method etches trenches through the substrate and through each semiconductor layer about the die being singulated, with the trenches being offset from each other around at least a part of the die so that the oxide layer between the trenches holds the substrate and die together. The trenches can be anisotropically etched using a Deep Reactive Ion Etching (DRIE) process. After the trenches are etched, the oxide layer between the trenches can be etched away with an HF etchant to singulate the die. A release fixture can be located near one side of the substrate to receive the singulated die.

  4. Extrusion die and method

    DOEpatents

    Lipp, G. Daniel

    1994-04-26

    A method and die apparatus for manufacturing a honeycomb body of rhombic cell cross-section by extrusion through an extrusion die of triangular cell discharge slot configuration, the die incorporating feedholes at selected slot intersections only, such that slot segments communicating directly with the feedholes discharge web material and slot segments not so connected do not discharge web material, whereby a rhombic cell cross-section in the extruded body is provided.

  5. The Ambiguous Dying Syndrome

    ERIC Educational Resources Information Center

    Bern-Klug, Mercedes

    2004-01-01

    More than one-half of the 2.4 million deaths that will occur in the United States in 2004 will be immediately preceded by a time in which the likelihood of dying can best be described as "ambiguous." Many people die without ever being considered "dying" or "at the end of life." These people may miss out on the opportunity to close important…

  6. Sputtered protective coatings for die casting dies

    NASA Technical Reports Server (NTRS)

    Mirtich, M. J.; Nieh, C.-Y.; Wallace, J. F.

    1981-01-01

    Three experimental research designs investigating candidate materials and processes involved in protective die surface coating procedures by sputter deposition, using ion beam technologies, are discussed. Various pre-test results show that none of the coatings remained completely intact for 15,000 test cycles. The longest lifetime was observed for coatings such as tungsten, platinum, and molybdenum which reduced thermal fatigue, but exhibited oxidation and suppressed crack initiation only as long as the coating did not fracture. Final test results confirmed earlier findings and coatings with Pt and W proved to be the candidate materials to be used on a die surface to increase die life. In the W-coated specimens, which remained intact on the surface after thermal fatigue testing, no oxidation was found under the coating, although a few cracks formed on the surface where the coating broke down. Further research is planned.

  7. Die Deutsche Statistische Gesellschaft in der Weimarer Republik und während der Nazidiktatur

    NASA Astrophysics Data System (ADS)

    Wilke, Jürgen

    Nach anfänglichen Schwierigkeiten durch den 1. Weltkrieg erlangte die Deutsche Statistische Gesellschaft (DStatG) unter dem renommierten Statistiker und Vorsitzenden der DStatG, Friedrich Zahn, durch eine Vielzahl von Aktivitäten hohes Ansehen. Es gab Bestrebungen, Statistiker aus allen Arbeitsfeldern der Statistik in die DStatG zu integrieren, wobei die "Mathematische Statistik" nur zögerlich akzeptiert wurde (Konjunkturforschung, Zeitreihenanalyse). Nach der Machtübernahme 1933 durch Adolf Hitler geriet die DStatG in das Fahrwasser nationalsozialistischer Ideologie und Politik (Führerprinzip, Gleichschaltung des Vereinswesens). Damit war eine personelle Umstrukturierung in der DStatG verbunden. Politisch Missliebige und rassisch Verfolgte mussten die DStatG verlassen (Bernstein, Freudenberg, Gumbel u.a.). Unter den Statistikern gab es alle Abstufungen im Verhalten zum Regime von Ablehnung und zwangsweiser Anpassung über bereitwilliges Mitläufertum bis zu bewusster Täterschaft. Besonders die Bevölkerungsstatistik wurde durch die NS- Rassenpolitik auf lange Sicht diskreditiert. Im Rahmen von Wirtschaftsplanung und Aufrüstung wurden neue zukunftsträchtige statistische Modelle (Grünig, Bramstedt, Leisse) entwickelt.

  8. Is Dying Young Worse than Dying Old?

    ERIC Educational Resources Information Center

    Jecker, Nancy S.; Schneiderman, Lawrence J.

    1994-01-01

    Notes that, in contemporary Western society, people feel death of small child is greater injustice than death of older adult and experience correspondingly greater sorrow, anger, regret, or bitterness when very young person dies. Contrasts these attitudes with those of ancient Greece and shows relevance that different attitudes toward death have…

  9. Dr. von Braun at 'Wernher von Braun Day' Celebration

    NASA Technical Reports Server (NTRS)

    1970-01-01

    In 1970 Marshall Space Flight Center (MSFC) Director Dr. Wernher von Braun (right) was reassigned to NASA Headquarters to serve as Deputy Associate Administrator for Plarning. Prior to his transfer, Dr. von Braun was honored for his career in Huntsville, Alabama, with the celebration of 'Wernher von Braun Day.' Among those participating were Alabama Governor Albert Brewer (left) and Alabama Senator John Sparkman (center). (Courtesy of Huntsville/Madison County Public library)

  10. Micromechanical die attachment surcharge

    DOEpatents

    Filter, William F.; Hohimer, John P.

    2002-01-01

    An attachment structure is disclosed for attaching a die to a supporting substrate without the use of adhesives or solder. The attachment structure, which can be formed by micromachining, functions purely mechanically in utilizing a plurality of shaped pillars (e.g. round, square or polygonal and solid, hollow or slotted) that are formed on one of the die or supporting substrate and which can be urged into contact with various types of mating structures including other pillars, a deformable layer or a plurality of receptacles that are formed on the other of the die or supporting substrate, thereby forming a friction bond that holds the die to the supporting substrate. The attachment structure can further include an alignment structure for precise positioning of the die and supporting substrate to facilitate mounting the die to the supporting substrate. The attachment structure has applications for mounting semiconductor die containing a microelectromechanical (MEM) device, a microsensor or an integrated circuit (IC), and can be used to form a multichip module. The attachment structure is particularly useful for mounting die containing released MEM devices since these devices are fragile and can otherwise be damaged or degraded by adhesive or solder mounting.

  11. Extrusion die and method

    DOEpatents

    Lipp, G. Daniel

    1994-05-03

    A method and die apparatus for manufacturing a honeycomb body of triangular cell cross-section and high cell density, the die having a combination of (i) feedholes feeding slot intersections and (ii) feedholes feeding slot segments not supplied from slot intersections, whereby a reduction in feedhole count is achieved while still retaining good extrusion efficiency and extrudate uniformity.

  12. Kosteneffiziente Honbearbeitung durch intelligente und flexible Verknüpfung von autarken Honzentren

    NASA Astrophysics Data System (ADS)

    Roth, Günther

    Die Planungsabteilungen in der Automobilindustrie werden vor immer größere Herausforderungen gestsellt. Der zur Verfügung stehende Zeitraum zu einer seriensicheren Umsetzung der entwicklungs- und produktionstechnischen Forderungen wird von Projekt zu Projekt kürzer. Aufgrund des hohen Wettbewerbsdrucks und daraus resultierenden erforderlichen Kostenoptimierungen, die schnelleren Timeto-market-und Innovationszyklen und die vermeintlich zur Kundenbindung erforderlichen, kaum mehr überschaubaren Diversifizierungen in den Modellpaletten lassen den Planungshorizont immer kürzer werden. Die zu beschaffenden Fertigungsanlagen sollen aber in den nächsten 8-12 Jahren all die Varianten produzieren können, die heute nur teilweise oder noch gar nicht bekannt sind.

  13. Dorfentwicklung und Dorferneuerung . Die neuen Bundesländer

    NASA Astrophysics Data System (ADS)

    Bender, Oliver; Richter, Horst P.

    1997-03-01

    Das 1975 in Kraft getretene Bundesraumordnungsprogramm forderte, in allen Landesteilen angemessene und gleichwertige Lebensbedingungen herzustellen. Mit der Novellierung des Flurbereinigungsgesetzes 1976 bzw. dem Zukunftsinvestitionsprogramm 1977 bis 1980 startete die Dorfentwicklung/Dorferneuerung nicht zuletzt als Initiative zur Konjunkturbelebung im ländlichen Raum. Seit 1984 ist sie Bestandteil der von Bund und Ländern getragenen Gemeinschaftsaufgabe "Verbesserung der Agrarstruktur und des Küstenschutzes" (GAK) und liegt im Zuständigkeitsbereich der Landwirtschaftsministerien. Die Dorferneuerungsprogramme der Länder werden aus Mitteln der GAK, der EU und des Landes finanziert. Neben Ortssanierungen nach dem Städtebauförderungsgesetz bzw. Baugesetzbuch stellen sie das wichtigste Instrument zur Förderung von ländlichen Orten und Gemeinden dar. Nach der Vereinigung wurde das Dorferneuerungsrecht auf die neuen Bundesländer übertragen, indem man sich zunächst an den Regelungen der jeweiligen Partnerländer im Westen orientierte. Doch hatten sich die Dörfer in Ost- und Westdeutschland nach dem Zweiten Weltkrieg völlig unterschiedlich entwickelt, so dass sich im Osten ein erweiterter Handlungsbedarf zeigte. Für Fachleute aus Politik, Verwaltung, Wissenschaft und freien Planungsberufen, nicht zuletzt für angewandt arbeitende Geographen, stellten sich neue Herausforderungen.

  14. Comparative study of the influence of friction forces on cold forming processes in conventional ECAP die and ECAP die with low friction, by numerical simulation methods

    NASA Astrophysics Data System (ADS)

    Dragnea, D.; Lixandru, P.; Chereches, T.; Velicu, S.

    2016-08-01

    In the process of severe plastic deformation in the ECAP dies, the frictional forces between the blank and the walls of the dies play a determinant role on forming technologies. Due to the great length of the workpiece subjected to forming (in die), high frictional forces are developing, which can lead to blocking the forming process or even to the cracking of the dies. Two sets of numerical simulations were carried out for two coefficients of friction µ = 0.08 and µ = 0.10. There were analysed the following elements comparatively: the structure of the deformed mesh of the finished piece; the effective plastic strain fields; the Von Misses effective stress fields; the actuation forces on the die punch. The results of the numerical simulations showed: uniform structure of slipped layers in central areas of the finished parts, obtained by the two processes; the effective plastic strain field is uniformly at the process with low friction Von Misses effective stresses were significantly lower at the numerical simulation for the process with low friction; the application forces occurring in the processes carried out in the ECAP die with low friction are significantly lower than those obtained in conventional ECAP die.

  15. When Somebody Dies

    MedlinePlus

    ... alguien muere All living things — including bugs and fish and people — die. It's difficult, even for grownups, ... kind of death for families and friends to deal with because it happens so fast. There is ...

  16. Herausforderungen und Best Practices bei der Speicherung von multi-valued Attributen in LDAP-basierten Verzeichnisdiensten

    NASA Astrophysics Data System (ADS)

    Hommel, Wolfgang; Pluta, Daniel

    LDAP-basierte Verzeichnisdienste unterscheiden sich von relationalen Datenbankmanagementsystemen unter anderem stark bezüglich der Datenmodellierung. Dieser Artikel vertieft eingangs die Herausforderungen bei der LDAP-spezifischen Abbildung von Relationen zwischen mehreren multivalued Attributen. Die Diskussion erfolgt vor dem Hintergrund, dass einerseits Verzeichnisdienste generell nur bedingt zur Speicherung von Relationen geeignet sind und dass andererseits multi-valued Attribute ein mächtiges LDAP-Instrument sind, zu dem es in relationalen Datenbanksystemen keine direkte Entsprechung gibt. Anschließend werden Lösungskonzepte vorgestellt und mögliche Weiterentwicklungen des IntegraTUM-LDAP-Schemas zu deren Umsetzung skizziert, eine exemplarische Implementierung präsentiert und die Ergebnisse der bisherigen Entwicklung des IntegraTUM-Schemas gegenübergestellt.

  17. Theodore von Karman

    NASA Technical Reports Server (NTRS)

    1950-01-01

    Dr. Theodore von Karman, co-founder of the Jet Propulsion Laboratory (JPL) Pasadena, California was an aeronautical theoretician. His contributions in the fields of aerodynamics and aeronautical engineering are well documented and well known to every aerospace engineer. He was the first winner of the prestigious U.S. Medal of Science presented to him by President John F. Kennedy. As well as being co-founder of JPL, he also was principal founder of a major rocket propulsion firm (Aerojet-General Corp.), the top science advisor to the U.S. Air Force during its transition to jet propulsion aircraft and the top science advisor to NATO. He was, during much of this time, the fountainhead of aerodynamic thought as head of the Guggenheim Aeronautical Laboratory at the California Institute of Technology (GALCIT) in Pasadena, California. In the May 1956 issue of the Journal of Aeronautical Sciences, it was said of him that 'No other man has had so great an impact on the development of aeronautical science in this country. Hundreds of young men became his students and scientific collaborators and were inspired to greater effort.' Dr. William H. Pickering, then director of JPL said in 1960 'We wouldn't have an aeronautical science as we know it today, if it weren't for Dr. Thoedore von Karman.' Under his guidance, Caltech's 10 foot wind tunnel was designed, built and operated. Industry firms such as Douglas, Northrop, Hughes, Lockheed, North American, Vultee and Consolidated all tested new aeronautical designs and concepts in GALCIT's tunnel. Even Boeing's own high-speed wind tunnel was heavily influenced by suggestions from von Karman. The National Advisory Committee for Aeronautics (NACA) became so concerned about GALCIT's growing influence over West coast aviation, it erected the Ames Laboratory in Sunnyvale, California in part to deter an ever widening aeronautical gap that had formed between NACA and GALCIT. From 1936 to 1940, Caltech stood alone as the only university

  18. Über die Perihelzeit des Halleyschen Kometen bei seiner Erscheinung im Jahre 837

    NASA Astrophysics Data System (ADS)

    Landgraf, Werner

    1983-07-01

    837 erfolgte ein naher Vorübergang des Halleyschen Kometen an der Erde. Bei kleiner Verfrühung oder Verspätung ist aufgrund der Differenz seiner gravitativen Ablenkung seine Bahn vor 837 unterschiedlich. Aus den früheren Beobachtungen ergibt sich daher sehr genau die Zeit von Vorbeiflug und Periheldurchgang 837 .

  19. Aufbau von organisationsübergreifenden Fehlermanagementprozessen im Projekt IntegraTUM

    NASA Astrophysics Data System (ADS)

    Hommel, Wolfgang; Knittl, Silvia

    Das Projekt IntegraTUM wird in enger Kooperation zwischen der Technischen Universität München (TUM) und dem Leibniz-Rechenzentrum (LRZ) durchgeführt. In diesem Projekt werden Dienste gemeinsam entwickelt, die nachhaltig vom LRZ betrieben werden sollen. Die damit verbundene Rezentralisierung erfordert auch eine enge Kooperation im Falle von technischen Störungen und Fehlern im Betriebsablauf bei diesen Diensten über die Organisationsgrenzen hinweg. Unsere Aktivitäten in diesem organisationsübergreifenden Fehlermanagement werden hier beschrieben.

  20. Verfahrenstechnische Grundlagen des Coatings

    NASA Astrophysics Data System (ADS)

    Mörl, Lothar

    Die Ummantelung von Feststoffteilchen mit Hüllsubstanzen hat in verschiednen Industriezweigen in der letzten Zeit an Bedeutung gewonnen. Eine wichtige Ursache dafür dürfte in den immer höheren Anforderungen begründet sein, die an Feststoffformulierungen gestellt werden. Neben den hohen Ansprüchen an die Rezepturgenauigkeit wird es immer interessanter, die Freisetzung bestimmter in den Feststoffformulierungen enthaltener Wirkstoffe voraussagen zu können. So ist es zum Beispiel insbesondere in der pharmazeutischen Industrie von entscheidender Bedeutung, wann und unter welchem Milieu die in einer Tablette oder in einem Dragee enthaltenen Wirkstoffe freigesetzt werden und wie schnell diese Freisetzung geschieht. Aber auch in anderen Industriezweigen wie z. B. der Landwirtschaft können durch die Ummantelung von pflanzlichen Samen (Samenpillierung) mit Herbiziden, Fungiziden, Wachstumsstimulatoren, Düngemitteln und anderen Substanzen erhebliche Effekte bei der Einsparung von Schädlingsbekämpfungsmitteln und beim Schutz der Keimlinge bei gleichzeitiger Optimierung der Gestalt der Samenpille erreicht werden. Auch die Entwicklung von sphärisch aufgebauten Düngemittelgranulaten mit definierter Wirkstofffreisetzung und optimalen Eigenschaften der Partikel für die Ausbringung in der Landwirtschaft ist auf diese Art möglich. Auch in der Nahrungs- und Genussmittelindustrie lassen sich eine Reihe von Anwendungsgebieten nennen, wie zum Beispiel die Kandierung von Bohnenkaffe, die Verkapselung von Vitaminen u. a [1].

  1. Dr. Wernher Von Braun

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Dr. Thomas Paine, Deputy Administrator of the National Aeronautics and Space Administration, examines an ordinary man's shoe outfitted for use in the Saturn I workshop. Pictured from the left in the Saturn I workshop mockup are William Brooksbank, propulsion and vehicle engineering laboratory; Dr. Paine; Dr. Wernher Von Braun, Marshall Center director; Colonel Clare F. Farley, Executive Officer in the Office Of The Administrator; and Charles J. Donlan, Deputy Associate Administrator for Manned Space Flight, Technical. the shoe Dr. Paine is holding has a unique fastener built into the sole to allow an astronaut to move about on the workshop floor and to remain in one position if he desires.

  2. Die Bedeutung Subjektiver Elternschaftskonzepte fur Erziehungsverhalten und elterliche Partnerschaft. Ein Uberblick uber neuere Forschungsergebnisse (The Significance of Subjective Concepts of Parenthood for Educational Behavior and Parental Partnership).

    ERIC Educational Resources Information Center

    Kalicki, Bernhard

    2003-01-01

    Outlines the subjective concept of parenthood as the personal interpretation of parental responsibility, distinguishing it from related theoretical concepts. Discusses, against the background of theoretical models and empirical findings, the relationship of the parenthood concept with the parents' actual educational behavior. Suggests ways to…

  3. Die regionalökonomische Bedeutung der Wissenschaft für das Ruhrgebiet - Hochschulen und außeruniversitäre Forschungseinrichtungen als Motor der regionalen Entwicklung

    NASA Astrophysics Data System (ADS)

    Kriegesmann, Bernd; Böttcher, Matthias; Lippmann, Torben

    2016-08-01

    The Ruhr area has advanced to the largest university region in Germany - often unnoticed within and outside. At the same time scientific institutions have become a major economic factor. Because of the higher and extra-university research institutions about 2.5 billion euros are effective as a demand potential in the region. 1.7 billion euros of this amount are directly associated with investments and operating expenditures of the scientific institutions as well as consumptions of employees and students. Additional 770 million euros result in revenues of many branches such as trade, housing, gastronomy sector, handcraft industry etc. It should not be underestimated that higher and extra-university research institutions generate with their research activities particular funding from the European Union or the rest of Germany for benefit of the region. Each euro spent by the state government for basic funding creates 39 cents third-party funding. These regional-economic effects result in noticeable employment impacts within the region. Around 25,000 people are directly employed in higher and extra-university research institutes or student unions (Studierendenwerke), about 22,000 jobs in other economic sectors are ensured or created by the induced demand. Science has thus become an important economic factor and represents an essential counterbalance to employment decline in shrinking industries of the region. The specific inclusion of science in a regional development strategy and targeted relining with appropriate measures to strengthen the science creates therefore an effective starting point for the design of structural change.

  4. Is dying young worse than dying old?

    PubMed

    Jecker, N S; Schneiderman, L J

    1994-02-01

    In contemporary Western society, people experience the deaths of older and younger persons differently. We are disposed to feel that the death of a small child is a greater injustice than the death of an older adult, and we experience correspondingly greater sorrow, anger, regret or bitterness when a very young person dies. This article examines these responses critically to determine whether they are backed by ethical considerations that reason can discern and defend. We contrast contemporary attitudes with those of ancient Greece and show the relevance that different attitudes toward death have for health care decision making.

  5. Renaturierung von Kalkmagerrasen

    NASA Astrophysics Data System (ADS)

    Kiehl, Kathrin

    Mitteleuropäische Kalkmagerrasen sind überwiegend durch jahrhundertelange extensive Nutzung auf trockenen kalkreichen Böden im Bereich der Mittelgebirge und der Flussschottergebiete der großen Alpenflüsse entstanden (Wilmanns 1997, Poschlod und WallisDeVries 2002). Außerhalb der Alpen kommen natürliche Kalkmagerrasen nur kleinräumig an wenigen Standorten vor. Bei den Böden natürlicher und nutzungsbedingter Kalkmagerrasen handelt es sich meistens um flachgründige Rendzinen oder Pararendzinen, die sich durch hohe pH-Werte, ein geringes Wasserspeichervermögen und eine schlechte Nährstoffverfügbarkeit auszeichnen (Scheffer und Schachtschabel 2002). Phosphat ist aufgrund des hohen Kalziumkarbonat-Gehalts großenteils als Kalziumphosphat festgelegt. Die für die Stickstoffversorgung notwendige Stickstoffmineralisation wird bei günstigen C/N-Verhältnissen häufig durch Trockenheit limitiert, da die mineralisierenden Bodenbakterien Wasser benötigen (Leuschner 1989, Neitzke 1998).

  6. Renaturierung von Ökosystemen in urban-industriellen Landschaften

    NASA Astrophysics Data System (ADS)

    Rebele, Franz

    Die Urbanisierung ist ein weltweit stattfindender Prozess mit weitreichenden Auswirkungen auf Mensch und Natur. In Mitteleuropa leben heute etwa 80% aller Bewohner in Städten. Urban-industrielle Landschaften gehören deshalb zur unmittelbaren Lebensumwelt der meisten Menschen. Allein in Deutschland wird heute täglich eine Fläche von 120 ha neu für Siedlungs- und Verkehrszwecke in Anspruch genommen. Zu den Siedlungs- und Verkehrsflächen zählen Gebäude-und gebäudebezogene Freiflächen, Verkehrsflächen, Erholungsflächen und Friedhöfe sowie Betriebsflächen für Industrie und Gewerbe. Nicht enthalten sind Tagebauflächen zum Abbau von Bodenschätzen (Kapitel 13). In Deutschland liegt der Anteil der Siedlungs- und Verkehrsflächen an der Gesamtfläche derzeit bei ca. 13%, in Österreich bei 5 % und in der Schweiz bei knapp 7 %. Charakteristisch für die heutige Entwicklung in Mitteleuropa ist, dass die Prozesse der Urbanisierung und der Flächeninanspruchnahme für Siedlung und Verkehr nicht ursächlich mit einem Bevölkerungswachstum verbunden sind, d. h. dass Freiflächen auch bei stagnierender oder in manchen Regionen sogar bei sinkender Einwohnerzahl bebaut werden.

  7. Vorausschauend Planen, Gezielt Handeln — Über Die Regelung Und Steuerung Technischer Prozesse

    NASA Astrophysics Data System (ADS)

    Grüne, Lars; Sager, Sebastian; Allgöwer, Frank; Bock, Hans Georg; Diehl, Moritz

    Seit Beginn der industriellen Revolution nimmt die Steuerungs- und Regelungstechnik eine Schlüsselstellung in vielen technischen Bereichen ein. James Watts Fliehkraftregler für Dampfmaschinen ist eines der frühen Beispiele eines extrem erfolgreichen Reglerkonzepts, von dem Ende der 1860er Jahre geschätzte 75000 Exemplare allein in England im Einsatz waren [2, S. 24]. Etwa um diese Zeit begannen Ingenieure, motiviert durch die immer höhere Komplexität der zu regelnden Maschinen, sich systematisch mit theoretischen Grundlagen der Regelung zu beschäftigen. Dies führte unausweichlich zu der Einsicht, dass das dynamische Verhalten der geregelten Systeme nur mit Hilfe der Mathematikverstanden und weiterentwickelt werden konnte, oder wie Werner von Siemens, ein weiterer technischer Pionier in diesem Bereich es formulierte: "Ohne Mathematik tappt man doch immer im Dunkeln.“

  8. Experiences of the dying.

    PubMed

    Schoenbeck, Susan L

    2011-01-01

    It is often a mystery to us how we have come to know and believe in certain things. Beliefs are like guests who come up to a door. They come in only if the host opens it and invites them in. Otherwise they are turned away, unable to enter. LPNs/LVNs are invited to reflect on their experiences and expand their knowledge and beliefs. There is growing recognition that bedside talks of the dying, spirit travel and near-death events are real events for the people who experience them. LPNs/ LVNs are encouraged to expand their knowledge and beliefs about dying.

  9. [Human dying has changed].

    PubMed

    Llano Escobar, A

    1990-01-01

    In the modern era, the act of dying, at least in the West, presents a series of new characteristics resulting from scientific and technological progress and social changes. More and more frequently, humans die in the strange surroundings of medical establishments without the support of their loved ones and without the opportunity of taking part in decisions related to their own deaths. In the light of the serious personal and social problems caused by this transformation of human death, bioethics emerges as an attempt to uncover options that are more humane.

  10. Renaturierung von Salzgrasländern bzw. Salzwiesen der Küsten

    NASA Astrophysics Data System (ADS)

    Seiberling, Stefan; Stock, Martin

    Die deutschen Meeresküsten werden im übergang vom Land zum Meer weitgehend von zwei ökosystemtypen geprägt. Auf die augenfälligeren, die Dünen, gehen wir hier nicht ein (siehe v. a.Grootjans et al. 2001, 2002, Rozé und Lemauviel 2004, Ketner-Oostra et al. 2006, Aptroot et al. 2007, Bossuyt et al. 2007). Gegenstand dieses Kapitels sind vielmehr die Salzwiesen, die im Wattenmeer der Nordsee als natürlicher Lebensraum auftreten und an der Ostseeküste — hier werden sie Salzgrasländer genannt — zu den ältesten Bestandteilen der Kulturlandschaft zählen. Naturnahe Küstensalzwiesen sind nicht nur Lebensraum für speziell angepasste Pflanzenund Tierarten, sondern tragen auch zur Regulation des marinen Stoffhaushalts und zum Küstenschutz bei.

  11. Schirmwirkung von Hochfrequenz (HF)-Schutzkleidung: Untersuchung verschiedener Konstruktionsmerkmale

    NASA Astrophysics Data System (ADS)

    Arps, V.; Scheibe, K.

    2005-05-01

    Die Messverfahren zur Bestimmung der Schutzwirkung von HF-Schutzkleidung sind in der Norm DIN 32780-100 festgelegt. Entsprechend diesen Anforderungen wird die elektrische und magnetische Schirmdämpfung bestimmt und daraus als Maß für die Schutzwirkung die elektromagnetische Schirmdämpfung berechnet. Diese ist eine der SAR vergleichbare Größe. In diesem Beitrag werden die Einflüsse verschiedener Konstruktionsmerkmale von HF-Schutzanzügen auf die elektromagnetische Schirmdämpfung untersucht. Zu diesen gehören die nach MIL STD 285 vermessene elektrische Schirmdämpfung der verwendeten Gewebe. Weiter werden verschiedene Teilbereiche der HF-Schutzkleidung auf ihre Schutzwirkung untersucht. Der Schwerpunkt liegt hierbei auf der Fragestellung inwieweit Verschlüsse, Reißverschlüsse oder leitfähiges Klettband, die Schutzwirkung beeinträchtigen. Zu diesem Zweck werden zwei Schutzanzüge unterschiedlicher Konstruktion vergleichend vermessen. Es handelt sich dabei um einen bereits im Handel befindlichen und entsprechend der Norm zertifizierten Anzug und einen neuen Prototyp, welcher nach verschiedenen Gesichtspunkten optimiert wurde. Schwachstellen der Konstruktion werden herausgearbeitet und Ansatzpunkte für weitere Verbesserungen erarbeitet. The measuring methods for determining the shielding effectiveness of radiofrequency (RF)-protective clothing are defined in German Standard DIN 32780-100. According to this standard, both the electric and the magnetic shielding effectiveness are measured in order to calculate the electromagnetic shielding effectiveness. The electromagnetic shielding effectiveness is an adequate quality criterion for the degree of protection and also compares well with the Specific Absorption Rate (SAR). In this article, the impact of different design features on the electromagnetic shielding effectiveness is analyzed. The electric shielding effectiveness of the used shielding materials is measured according to MIL STD 285 and thereupon

  12. Wolfgang von Ohnesorge

    NASA Astrophysics Data System (ADS)

    McKinley, Gareth H.; Renardy, Michael

    2011-12-01

    This manuscript got started when one of us (G.H.M.) presented a lecture at the Institute of Mathematics and its Applications at the University of Minnesota. The presentation included a photograph of Rayleigh and made frequent mention of the Ohnesorge number. When the other of us (M.R.) enquired about a picture of Ohnesorge, we found out that none were readily available on the web. Indeed, little about Ohnesorge is available from easily accessible public sources. A good part of the reason is certainly that, unlike other "numbermen" of fluid mechanics, Ohnesorge did not pursue an academic career. The purpose of this article is to fill the gap and shed some light on the life of Wolfgang von Ohnesorge. We shall discuss the highlights of his biography, his scientific contributions, their physical significance, and their impact today.

  13. Die andere Revolution

    NASA Astrophysics Data System (ADS)

    Kippenhahn, Rudolf

    2005-05-01

    War Kopernikus der größte Revolutionär des naturwissenschaftlichen Weltbildes? Seine Erkenntnisse waren der Beginn eines jahrhundertelangen Denkprozesses, welcher zur Einsicht führte, dass im Weltall die gleichen physikalischen Gesetze gelten wie auf der Erde.

  14. Die Kosmologie der Griechen.

    NASA Astrophysics Data System (ADS)

    Mittelstraß, J.

    Contents: 1. Mythische Eier. 2. Thales-Welten. 3. "Alles ist voller Götter". 4. Griechische Astronomie. 5. "Rettung der Phänomene". 6. Aristotelische Kosmololgie. 7. Aristoteles-Welt und Platon-Welt. 8. Noch einmal: die Göttlichkeit der Welt. 9. Griechischer Idealismus.

  15. Von Hippel-Lindau Disease.

    PubMed

    Findeis-Hosey, Jennifer J; McMahon, Kelly Q; Findeis, Sarah K

    2016-06-01

    Von Hippel-Lindau disease is an autosomal dominant syndrome which occurs secondary to germline mutations in the VHL tumor suppressor gene, located on chromosome 3. Clinically von Hippel-Lindau disease is characterized by an increased risk of developing simple visceral cysts, most commonly in the pancreas and kidneys, in addition to an increased risk of developing neoplasms, often with clear cell features, in a multitude of organ systems. The most common neoplasms are cerebellar and retinal hemangioblastomas, adrenal pheochromocytomas, clear cell renal cell carcinomas, pancreatic neuroendocrine tumors, pancreatic serous cystadenomas, and endolymphatic sac tumors. These lesions most commonly present during adulthood; however, screening and surveillance for the development of these lesions should begin in the pediatric years for patients with von Hippel-Lindau disease. In this review article, the genetics and most common neoplasms of von Hippel-Lindau disease are reviewed, with an eye towards implications for the pediatric patient. PMID:27617152

  16. Pregnancy and von Gierke's disease.

    PubMed

    Farber, M; Knuppel, R A; Binkiewicz, A; Kennison, R D

    1976-02-01

    A detailed description of the course of pregnancy in a patient with von Gierke's disease is presented. Careful dietary control together with proper management of the hematologic complications of the disease led to a successful outcome. PMID:1061911

  17. von Braun and German Publisher

    NASA Technical Reports Server (NTRS)

    1969-01-01

    In this photograph, Guenter Ogger of Capitol Magazine, West Germany, greets Marshall Space Flight Center Director, Dr. Wernher von Braun. Mr. Ogger interviewed the famous rocket scientist for his magazine.

  18. Navigating "Assisted Dying".

    PubMed

    Schipper, Harvey

    2016-02-01

    Carter is a bellwether decision, an adjudication on a narrow point of law whose implications are vast across society, and whose impact may not be realized for years. Coupled with Quebec's Act Respecting End-of-life Care it has sharply changed the legal landscape with respect to actively ending a person's life. "Medically assisted dying" will be permitted under circumstances, and through processes, which have yet to be operationally defined. This decision carries with it moral assumptions, which mean that it will be difficult to reach a unifying consensus. For some, the decision and Act reflect a modern acknowledgement of individual autonomy. For others, allowing such acts is morally unspeakable. Having opened the Pandora's Box, the question becomes one of navigating a tolerable societal path. I believe it is possible to achieve a workable solution based on the core principle that "medically assisted dying" should be a very rarely employed last option, subject to transparent ongoing review, specifically as to why it was deemed necessary. My analysis is based on 1. The societal conditions in which have fostered demand for "assisted dying", 2. Actions in other jurisdictions, 3. Carter and Quebec Bill 52, 4. Political considerations, 5. Current medical practice. Leading to a series of recommendations regarding. 1. Legislation and regulation, 2. The role of professional regulatory agencies, 3. Medical professions education and practice, 4. Public education, 5. Health care delivery and palliative care. Given the burden of public opinion, and the legal steps already taken, a process for assisted-dying is required. However, those legal and regulatory steps should only be considered a necessary and defensive first step in a two stage process. The larger goal, the second step, is to drive the improvement of care, and thus minimize assisted-dying. PMID:27169205

  19. Von Donuts und Zucker: Mit Neutronen biologische Makromoleküle erforschen

    NASA Astrophysics Data System (ADS)

    May, Roland P.

    2003-05-01

    Für die Erforschung von Biomolekülen bieten Neutronen einzigartige Eigenschaften. Vor allem ihre unterschiedliche Wechselwirkung mit dem natürlichen Wasserstoff und seinem schweren Isotop Deuterium ermöglicht tiefe Einblicke in Struktur, Funktion und Dynamik von Proteinen, Nukleinsäuren und Biomembranen. Bei vielen Fragestellungen zur Strukturaufklärung gibt es kaum oder keine Alternative zum Neutron. Das Institut Laue-Langevin trägt Bahnbrechendes zum Erfolg der Neutronen-Methoden in der Biologie bei.

  20. Von Karman and JATO Team

    NASA Technical Reports Server (NTRS)

    1940-01-01

    Dr. Theodore von Karman (black coat) sketches out a plan on the wing of an airplane as his JATO engineering team looks on. From left to right: Dr. Clark B. Millikan, Dr.Martin Summerfield, Dr. Theodore von Karman, Dr. Frank J. Malina and pilot, Capt. Homer Boushey. Captain Boushey would become the first American to pilot an airplane that used JATO (Jet Assisted Take-Off) solid propellent rockets.

  1. Modeling the Mechanical Performance of Die Casting Dies

    SciTech Connect

    R. Allen Miller

    2004-02-27

    The following report covers work performed at Ohio State on modeling the mechanical performance of dies. The focus of the project was development and particularly verification of finite element techniques used to model and predict displacements and stresses in die casting dies. The work entails a major case study performed with and industrial partner on a production die and laboratory experiments performed at Ohio State.

  2. Heated die facilitates tungsten forming

    NASA Technical Reports Server (NTRS)

    Chattin, J. H.; Haystrick, J. E.; Laughlin, J. C.; Leidy, R. A.

    1966-01-01

    Tungsten forming in a press brake employs a bottom die assembly with a heating manifold between two water-cooled die sections. The manifold has hydrogen-oxygen burners spaced along its length for even heat during forming.

  3. Richard von Volkmann

    PubMed Central

    Willy, Christian; Schneider, Peter; Engelhardt, Michael; Hargens, Alan R.

    2008-01-01

    Richard von Volkmann (1830–1889), one of the most important surgeons of the 19th century, is regarded as one of the fathers of orthopaedic surgery. He was a contemporary of Langenbeck, Esmarch, Lister, Billroth, Kocher, and Trendelenburg. He was head of the Department of Surgery at the University of Halle, Germany (1867–1889). His popularity attracted doctors and patients from all over the world. He was the lead physician for the German military during two wars. From this experience, he compared the mortality of civilian and war injuries and investigated the general poor hygienic conditions in civilian hospitals. This led him to introduce the “antiseptic technique” to Germany that was developed by Lister. His powers of observation and creativity led him to findings and achievements that to this day bear his name: Volkmann’s contracture and the Hueter-Volkmann law. Additionally, he was a gifted writer; he published not only scientific literature but also books of children’s fairy tales and poems under the pen name of Richard Leander, assuring him a permanent place in the world of literature as well as orthopaedics. PMID:18196438

  4. Psychotherapy with Older Dying Persons.

    ERIC Educational Resources Information Center

    Dye, Carol J.

    Psychotherapy with older dying patients can lead to problems of countertransference for the clinician. Working with dying patients requires flexibility to adapt basic therapeutics to the institutional setting. Goals of psychotherapy must be reconceptualized for dying clients. The problems of countertransference arise because clinicians themselves…

  5. Psychotherapy with the dying patient.

    PubMed

    Schwartz, A M; Karasu, T B

    1977-01-01

    This paper develops and describes encounters with dying patients and their families and looks for consesus of patterns and responses of possible help in confronting this situation. It offers positive suggestions for those providing care for dying patients but also acknowledges that only an intellectual grasp of the situation is not sufficient qualification for caring for the dying.

  6. Allgemeine Relativitätstheorie. Eine Einführung in die Theorie des Gravitationsfeldes.

    NASA Astrophysics Data System (ADS)

    Stephani, H.

    Contents:Einführung:1. Die kräftefreie Bewegung von Massenpunkten in der Newtonschen Mechanik.Grundlagen der Riemannschen Geometrie:2. Warum überhaupt Riemannsche Geometrie? 3. Der Riemannsche Raum. 4. Tensoralgebra. 5. Kovariante Ableitung und Parallelverschiebung. 6. Der Krümmungstensor. 7. Differentialoperatoren, Integrale und Integralsätze. 8. Grundgesetze der Physik in Riemannschen Räumen.Grundlagen der Einsteinschen Gravitationstheorie:9. Die Grundgleichungen der Einsteinschen Gravitationstheorie. 10. DieSchwarzschild-Lösung. 11. Die innere Schwarzschild-Lösung. 12. Die Reissner-Weyl-Lösung.Linearisierte Gravitationstheorie,Fernfelder und Gravitationswellen:13. Die linearisierte Einsteinsche Gravitationstheorie. 14. Fernfelder beliebiger Materieverteilungen und Bilanzgleichungen für Impuls und Drehimpuls. 15. Gravitationswellen. 16. Das Cauchy-Problem der Einsteinschen Feldgleichungen.Invariante Charakterisierung strenger Lösungen:17. Ausgezeichnete Vektorfelder und ihre Eigenschaften. 18. Die Petrow-Klassifizierung. 19. Killing-Vektoren und Bewegungsgruppen. 20. Die Einbettung Riemannscher Räume in flache Räume höherer Dimension. 21. Übersicht über einige ausgewählte Lösungsklassen.Gravitationskollaps und schwarze Löcher:22. Die Schwarzschild-Singularität. 23. Gravitationskollaps - die mögliche Lebensgeschichte eines kugelsymmetrischen Sterns. 24. Rotierende schwarze Löcher.Kosmologie:25. Die Robertson-Walker-Metriken und ihre Eigenschaften. 26. Die Dynamik der Robertson-Walker-Metriken und die Friedmannschen Weltmodelle. 27. Unsere Welt als Friedmann-Kosmos. 28. Allgemeinere kosmologische Modelle.Nichteinsteinsche Gravitationstheorien:29. Klassische Feldtheorien. 30. Relativitätstheorie und Quantentheorie.

  7. Der vollständige Brief Brahes an Sørensen über das Erscheinen des Kometen von 1577

    NASA Astrophysics Data System (ADS)

    Kirschner, Stefan

    Es ist erstaunlich, daß sowohl Friis als auch Dreyer in ihrer Ausgabe der Briefe Tycho Brahes den Brief vom 14. November 1577 an Peter Sørensen, die erste bekannte Nachricht Brahes von seiner Entdeckung des Kometen von 1577, nur unvollständig, und zwar ohne den astronomischen Inhalt, ediert haben. Der Brief, dessen Original sehr wahrscheinlich nicht mehr existiert, wurde von dem Kieler Arzt und Medizinprofessor Johann Daniel Major (1634 - 1693) in Kopenhagen in sein Reisetagebuch kopiert. Das Original des Majorschen Reisetagebuches ist verschollen, doch es existieren zwei Abschriften davon (Kopenhagen, Königl. Bibl., Ny Kgl. Sml., 365, Fol. u. Ledreborg, 410, Fol.). Im folgenden wird nach einer kurzen Beschreibung des Stellenwerts, den der Komet von 1577 für Brahe besaß, der Brief nach diesen beiden Abschriften kritisch ediert, mit einer deutschen Übersetzung versehen und kurz kommentiert.

  8. Variabilität des Reviergesangs des Buchfinken (Fringilla coelebs) zur Raum-Zeit-Beschreibung von Metapopulationen

    NASA Astrophysics Data System (ADS)

    Nolte, Björn

    2003-10-01

    Der Buchfinkengesang wurde in Potsdam in zwei Hauptpopulationen über drei Jahre aufgenommen. Jedes Individuum wurde eindeutig am individuellen Strophentypenrepertoire identifiziert. Ein weiterer Punkt der die individuelle Wiedererkennung bestätigt ist die hohe Standorttreue der adulten Männchen. Die beschriebene Methode eignet sich für die Untersuchung von gesamten Populationen, um den Wandel des Gesangs von Populationen in Raum und Zeit zu beschreiben. Die Haupterkenntnisse der Arbeit sind: - Die Gesamtanzahl der Grundstrophentypen innerhalb einer Population bleibt über Jahre konstant. - Die relative Häufigkeit jedes einzelnen Strophentyps variiert von Jahr zu Jahr und von Population zu Population. - Gesangslernen erfolgt exakt mit einem Korrektheitsgrad von mindestens 96%. - Das Song-Sharing ist innerhalb der Population hoch. Die diskutierten Mechanismen für das Song-Sharing sind: Die Lebenserwartung, das Zugverhalten, das Lernverhalten, die Etabliertheit von Strophentypen, Weibchenpräferenzen und die Reaktionen der territorialen Männchen. - Weiterhin wurde ein Modell zur kulturellen Evolution des Buchfinkengesangs programmiert, um die Rolle der Einflussfaktoren, wie Fehlerquote, Abwanderungsrate und Laufzeit zu ermitteln. Der Wandel des Dialektes erfolgt graduell in Raum und Zeit. Daher sind keine scharfen Dialektgrenzen anzutreffen. Trotz dieser Tatsache markieren die etablierten Strophentypen die Population. 50 % der Juvenilen siedeln am Geburtsort, auf diese Weise bleibt der Dialekt erhalten und Inzest wird vermieden. -Analysiert man das Repertoire benachbarten Männchen bei isolierten Alleen, so entspricht die Gesangsangleichung in etwa dem Zufall. -Intraindividuelle Vergleiche der quantitativen Parameter des jeweiligen Strophentyps wurden saisonal und annuell durchgeführt. Saisonal konnten für einen Strophentyp ein Trend ermittelt werden. Bei jährlichen Vergleichen konnten intraindividuell ausschließlich nicht signifikante Ergebnisse ermittelt

  9. Variabilität des Reviergesangs des Buchfinken (Fringilla coelebs) zur Raum-Zeit-Beschreibung von Metapopulationen

    NASA Astrophysics Data System (ADS)

    Nolte, Björn

    2003-10-01

    Der Buchfinkengesang wurde in Potsdam in zwei Hauptpopulationen über drei Jahre aufgenommen. Jedes Individuum wurde eindeutig am individuellen Strophentypenrepertoire identifiziert. Ein weiterer Punkt der die individuelle Wiedererkennung bestätigt ist die hohe Standorttreue der adulten Männchen. Die beschriebene Methode eignet sich für die Untersuchung von gesamten Populationen, um den Wandel des Gesangs von Populationen in Raum und Zeit zu beschreiben. Die Haupterkenntnisse der Arbeit sind: - Die Gesamtanzahl der Grundstrophentypen innerhalb einer Population bleibt über Jahre konstant. - Die relative Häufigkeit jedes einzelnen Strophentyps variiert von Jahr zu Jahr und von Population zu Population. - Gesangslernen erfolgt exakt mit einem Korrektheitsgrad von mindestens 96%. - Das Song-Sharing ist innerhalb der Population hoch. Die diskutierten Mechanismen für das Song-Sharing sind: Die Lebenserwartung, das Zugverhalten, das Lernverhalten, die Etabliertheit von Strophentypen, Weibchenpräferenzen und die Reaktionen der territorialen Männchen. - Weiterhin wurde ein Modell zur kulturellen Evolution des Buchfinkengesangs programmiert, um die Rolle der Einflussfaktoren, wie Fehlerquote, Abwanderungsrate und Laufzeit zu ermitteln. Der Wandel des Dialektes erfolgt graduell in Raum und Zeit. Daher sind keine scharfen Dialektgrenzen anzutreffen. Trotz dieser Tatsache markieren die etablierten Strophentypen die Population. 50 % der Juvenilen siedeln am Geburtsort, auf diese Weise bleibt der Dialekt erhalten und Inzest wird vermieden. -Analysiert man das Repertoire benachbarten Männchen bei isolierten Alleen, so entspricht die Gesangsangleichung in etwa dem Zufall. -Intraindividuelle Vergleiche der quantitativen Parameter des jeweiligen Strophentyps wurden saisonal und annuell durchgeführt. Saisonal konnten für einen Strophentyp ein Trend ermittelt werden. Bei jährlichen Vergleichen konnten intraindividuell ausschließlich nicht signifikante Ergebnisse ermittelt

  10. Modulare LDAP-Server-, -Protokoll und - Funktionserweiterungen am Beispiel von OpenLDAP

    NASA Astrophysics Data System (ADS)

    Pluta, Daniel

    In diesem Artikel wird ein Standardisierungsvorschlag für eine LDAP-Protokollerweiterung und deren Referenzimplementierung in Form einer modularen Erweiterung für die LDAP-Software-Suite des OpenLDAPProjektes vorgestellt. Nach einer Einführung in und einem Überblick über die wichtigsten OpenLDAP-Komponenten stellen wir unseren Lösungsansatz vor und gehen auf seine technischen Details ein. Ziel dieses Overlays ist die Implementierung einer neuen Funktionalität, die vom LDAP-Protokoll bisher nicht vorgesehen ist: Der Umfang der Suchergebnismenge soll serverseitig, dezentral und in der Granularität ganzer Objekte in Abhängigkeit von der aktuellen Serverzeit (konfigurierbar) eingeschränkt werden.

  11. Nitriding of Aluminum Extrusion Die: Effect of Die Geometry

    NASA Astrophysics Data System (ADS)

    Akhtar, S. S.; Arif, A. F. M.; Yilbas, B. S.

    2010-04-01

    Nitriding of complex-shaped extrusion dies may result in non-uniform nitride layers and hence a required hardness may not be achieved in some regions of the bearing area. The present study is carried out to assess the effect of extrusion die profile on the characteristics and growth behavior of nitride layers so that the critical die design feature can be identified to enhance the uniformity of the nitride layer. For this purpose, AISI H13 steel samples have been manufactured with profiles similar to those of hot extrusion dies. The samples were then gas nitrided under controlled nitriding potential. The uniformity and depth of nitride layers have been investigated in terms of compound layer and total nitride case depth for selected die features. The results of this study indicated the need to include the effect of profile on the nitride layer for the optimal die design with improved service life.

  12. Bemerkungen zur Relativitätstheorie und zu den Quanten

    NASA Astrophysics Data System (ADS)

    Bergmann, Peter G.

    Die theoretischen und experimentellen Grundlagen von Gravitations- und Quantenphysik, die Beziehung beider Theorien und die Bedeutung wesentlicher Begriffe, wie Observable, werden diskutiert.Translated AbstractRemarks on Relativity and on Quantum TheoryThe theoretical and experimental foundations of gravitation and quantum physics are discussed as well as the relation of these two theories and the role of basic notions like observables.

  13. Accurate defect die placement and nuisance defect reduction for reticle die-to-die inspections

    NASA Astrophysics Data System (ADS)

    Wen, Vincent; Huang, L. R.; Lin, C. J.; Tseng, Y. N.; Huang, W. H.; Tuo, Laurent C.; Wylie, Mark; Chen, Ellison; Wang, Elvik; Glasser, Joshua; Kelkar, Amrish; Wu, David

    2015-10-01

    Die-to-die reticle inspections are among the simplest and most sensitive reticle inspections because of the use of an identical-design neighboring-die for the reference image. However, this inspection mode can have two key disadvantages: (1) The location of the defect is indeterminate because it is unclear to the inspector whether the test or reference image is defective; and (2) nuisance and false defects from mask manufacturing noise and tool optical variation can limit the usable sensitivity. The use of a new sequencing approach for a die-to-die inspection can resolve these issues without any additional scan time, without sacrifice in sensitivity requirement, and with a manageable increase in computation load. In this paper we explore another approach for die-to-die inspections using a new method of defect processing and sequencing. Utilizing die-to-die double arbitration during defect detection has been proven through extensive testing to generate accurate placement of the defect in the correct die to ensure efficient defect disposition at the AIMS step. The use of this method maintained the required inspection sensitivity for mask quality as verified with programmed-defectmask qualification and then further validated with production masks comparing the current inspection approach to the new method. Furthermore, this approach can significantly reduce the total number of defects that need to be reviewed by essentially eliminating the nuisance and false defects that can result from a die-to-die inspection. This "double-win" will significantly reduce the effort in classifying a die-to-die inspection result and will lead to improved cycle times.

  14. Darwin, Engels und die Rolle der Arbeit in der biologischen und kulturellen Evolution des Menschen

    NASA Astrophysics Data System (ADS)

    Reichholf, Josef H.

    Im Jahre 1876, 5 Jahre nach Erscheinen von Darwins Buch über die Evolution des Menschen und die sexuelle Selektion (Darwin 1871), veröffentlichte Friedrich Engels den berühmt gewordenen Essay "Anteil der Arbeit an der Menschwerdung des Affen“ (Engels 1876). Die Kernfrage darin lautet in Kurzform: Warum hat der Mensch eigentlich ein Bedürfnis nach Arbeit? Engels Antwort wird nachfolgend näher betrachtet und vom gegenwärtigen Kenntnisstand aus beurteilt. Wie sich zeigen wird, beantworten seine Überlegungen die Frage nicht wirklich. Sie ist weiterhin offen. Es können lediglich einige zusätzliche Anhaltspunkte zur Diskussion gestellt werden. Angesichts des drängenden Problems millionenfacher Arbeitslosigkeit und der Forderungen nach einem "Grundrecht auf Arbeit“ kommt den Überlegungen zum möglichen Ursprung des Bedürfnisses nach Arbeit mehr als nur akademisches Interesse zu.

  15. Der neue Kosmos. Einführung in die Astronomie und Astrophysik

    NASA Astrophysics Data System (ADS)

    Unsöld, Albrecht; Baschek, Bodo

    Der neue Kosmos bietet in überschaubarem Umfang eine zusammenhängende Einführung in das Gesamtgebiet der Astronomie und Astrophysik. Aus den Bereichen: Klassische Astronomie und Planetensystem, Instrumente und Beobachtungsverfahren, Sonne und Sterne, Milchstraße und Galaxien, Kosmologie, Entstehung des Planetensystems, Entwicklung der Erde und des Lebens werden die Beobachtungsmethoden und die Ergebnisse astronomischer Forschung sowie deren theoretische Grundlagen und wechselseitigen Zusammenhänge vermittelt. Die aktualisierte 7. Auflage berücksichtigt den raschen Fortschritt astronomischer Forschung der letzten drei Jahre von unserem Planetensystem und den Entdeckungen zahlreicher Planeten bei anderen Sternen, über die fernsten Galaxien und Quasare bis zur Entwicklung der modernen Kosmologie.

  16. von Willebrand Disease (For Parents)

    MedlinePlus

    ... Type 2A or Type 2B. People with Type 3 (and some with Type 2A and 2B) will need treatment with Humate-P, an intravenous medication derived from human plasma that contains factor VIII and von Willebrand factor. ...

  17. Graphite/Thermoplastic-Pultrusion Die

    NASA Technical Reports Server (NTRS)

    Wilson, Maywood L.; Frye, Mark W.; Johnson, Gary S.; Stanfield, Clarence E.

    1990-01-01

    Attachment to extruder produces thermoplastic-impregnated graphite tape. Consists of profile die, fiber/resin collimator, and crosshead die body. Die designed to be attached to commercially available extrusion machine capable of extruding high-performance thermoplastics. Simple attachment to commercial extruder enables developers of composites to begin experimenting with large numbers of proprietary resins, fibers, and hybrid composite structures. With device, almost any possible fiber/resin combination fabricated.

  18. Die Milchstraße.

    NASA Astrophysics Data System (ADS)

    Henbest, N.; Couper, H.

    This book is a German translation, by M. Röser, from the English original "The guide to the Galaxy", published in 1994 (see Abstr. 61.003.065). Contents: 1. Die Entdeckung unserer Galaxis. 2. Die Lokale Gruppe. 3. Die Geographie der Galaxis. 4. Der Perseus-Arm. 5. Der Orion-Arm. 6. Unsere lokale Nachbarschaft: ein typischer Winkel der Galaxis. 7. Der Sagittarius-Arm: innerhalb der Sonnenumlaufbahn. 8. Das Zentrum der Galaxis.

  19. Homeopathy as elective in undergraduate medical education--an opportunity for teaching professional core skills.

    PubMed

    Lehmann, Bianca; Krémer, Brigitte; Werwick, Katrin; Herrmann, Markus

    2014-01-01

    Zielsetzung: In der Evaluation des seit sechs Jahren regelmäßig stattfindenden klinischen Wahlfachs Homöopathie am Institut für Allgemeinmedizin der Universität Magdeburg wurden sowohl die studentische Einschätzung des Seminarkonzepts und der -durchführung als auch die Bedeutung für die professionelle Sozialisation der Studierenden erfragt.Methodik: Im Rahmen des seit dem Wintersemester 2008/2009 jährlich stattfindenden Wahlfachs wurden für drei Veranstaltungen leitfadengestützte Gruppendiskussionen mit insgesamt 30 Teilnehmern des Wahlfachs durchgeführt. Die Auswertung dieser erfolgte in Anlehnung an die qualitative Inhaltsanalyse nach Mayring.Ergebnisse: Seminarkonzept und -durchführung haben sich bewährt. Die Lern- und Erlebenserfahrungen durch das Wahlfach, v.a. hinsichtlich eines holistischen, individualisierten Blicks auf die Person des Patienten sowie der Bedeutung einer partnerschaftlichen Arzt-Patient-Beziehung, werden von den Studierenden – unabhängig von ihrer persönlichen Einstellung zur Homöopathie – als positiv gewertet. Diese Einschätzung erfolgt gerade auch mit Blick auf ihre bisherige konventionell medizinisch geprägte Ausbildung.Schlussfolgerung: Das Wahlfach vermittelt den Studierenden neben dem spezifischen Fachwissen für eine integrative Medizin auch wichtige ärztliche Basiskompetenzen, welche unabhängig von einer komplementärmedizinischen Ausrichtung von Bedeutung sind.

  20. Where people die.

    PubMed

    Katz, B P; Zdeb, M S; Therriault, G D

    1979-01-01

    Death certificates for 1977 filed with the New York State Department of Health were studied to determine where people died. Data were examined by the location and cause of death and by the age, sex, race, and marital status of the decedent. Comparisons were made with a similar study in which U.S. data were used for 1958 events. Approximately 60 percent of all the 1977 deaths in upstate New York occurred in hospitals; only 27 percent occurred outside an institution. The location of death varied by all the factors studied. Within all age categories, males had a higher percentage of hospital deaths. In those age categories in which nursing home deaths comprised a significant proportion of total deaths, females had a higher percentage of such deaths than males. Differences in the location of death according to its cause reflect the nature of the cause of death, for example, whether it was of sudden onset or the result of chronic disease. Most people do not consider in advance where they might die. The idea that age, sex, and marital status, as well as the more obvious cause, all play a part in the location may seem surprising. Yet all these factors were found to be associated withe location of deaths in upstate New York, and there is no reason to believe that this association does not hold true for the entire nation. More research, however, needs to be done based on more years and other geographic artal stutus may be instructive as to the present state of health resources.

  1. Neue biosensorische Prinzipien für die Hämoglobin-A1c Bestimmung

    NASA Astrophysics Data System (ADS)

    Stöllner, Daniela

    2002-06-01

    Hämoglobin-A1c (HbA1c) ist ein Hämoglobin (Hb)-Subtypus, der durch nicht-enzymatische Glykierung des N-terminalen Valinrestes der Hämoglobin-beta-Kette entsteht. Das gemessene Verhältnis von HbA1c zum Gesamt-Hämoglobin (5-20 % bei Diabetikern) repräsentiert den Mittelwert der Blutglucosekonzentration über einen zweimonatigen Zeitraum und stellt zur Beurteilung der diabetischen Stoffwechsellage eine Ergänzung zur Akutkontrolle der Glukosekonzentration dar. Ziel der vorliegenden Arbeit war es, einen amperometrischen Biosensor für die Bestimmung des medizinisch relevanten Parameters HbA1c zu entwickeln. Durch Selektion geeigneter Bioerkennungselemente und deren Immobilisierung unter Erhalt der Bindungsfunktion für die Zielmoleküle Hämoglobin bzw. HbA1c wurden spezifische, hochaffine und regenerationsstabile Sensoroberflächen geschaffen. Für die Entwicklung des HbA1c-Biosensors wurden zwei Konzepte - Enzymsensor und Immunosensor - miteinander verglichen. Die enzymatische Umsetzung von HbA1c erfolgte mit der Fructosylamin Oxidase (FAO) aus Pichia pastoris N 1-1 unter Freisetzung von H2O2, welches sowohl optisch über eine Indikatorreaktion als auch elektrochemisch nach Einschluss der FAO in PVA-SbQ und Fixierung des Immobilisats vor einer H2O2-Elektrode nachgewiesen wurde. Die Kalibration des Enzymsensors mit der HbA1c-Modellsubstanz Fructosyl-Valin ergab Nachweisgrenzen, die ausserhalb des physiologisch relevanten HbA1c-Konzentrationsbereich lagen. Aus der Umsetzung von glykierten Peptiden mit einer nicht HbA1c analogen Aminosäurensequenz, z.B. Fructosyl-Valin-Glycin wurde zudem eine geringe HbA1c-Spezifität abgeleitet. Für den Immunosensor wurden zwei heterogene Immunoassay-Formate unter Verwendung von hochaffinen und spezifischen Antikörpern in Kombination mit Glucose Oxidase (GOD) als Markerenzym zum Nachweis von HbA1c untersucht. Beim indirekt-kompetitiven Immunoassay wurde anstelle des kompletten HbA1c-Moleküls das glykierte Pentapeptid

  2. Front End Schaltung zur Online Auswertung von EKG-Signalen

    NASA Astrophysics Data System (ADS)

    Ayari, E.; Tielert, R.

    2007-06-01

    Ein mobiles EKG-System zur Online Auswertung von EKG-Signalen wird dargestellt. Die Auswertung beruht auf ein energiesparendes Verfahren, das den Vorteil einer zulässigen Unterabtastung des Signals bietet und eine Interaktion zwischen der messenden Elektronik und dem funkgebundenen Auswertungsrechner ermöglicht. Diese Interaktion besteht darin, sowohl die Front End Schaltung im EKG-Sensor als auch den im ATmega8L eingebetteten A/D-Wandler vom Auswertungsrechner zu steuern und den Datenbedarf des Rechners dynamisch an die Erfordernisse des Analyseprogramms anzupassen. Das entwickelte EKG-System liefert erfolgreiche Charakterisierungen erfasster Elektrokardiogramme. A mobile ecg-system for an online analysis of electrocardiogram signals is presented. The analysis is based on an energy-saving procedure, which offers the advantage of an acceptable undersampling of the signal, and which allows an interaction between the measuring electronic and the radio-bound analysis-computer. In this interaction both the front-end circuit in the ecg-sensor and the A/D converter, which is embedded in the ATmega8L, are steered by the analysis computer. The data requirement of the computer is also dynamically adapted to the requirements of the analysis-program. The developed ecg-system supplies successful characterisations of measured electrocardiograms.

  3. Einsteins Spuren in den Archiven der Wissenschaft: Physikgeschichte

    NASA Astrophysics Data System (ADS)

    Marx, Werner

    2005-07-01

    Die Erwähnungen und Zitierungen von Einsteins Arbeiten dokumentieren lediglich den quantifizierbaren Anteil von Einsteins Beitrag zur Physik. Gleichwohl belegen sie die außergewöhnliche Resonanz und Langzeitwirkung seiner Arbeiten. Die Häufigkeit der Zitierungen entspricht nicht der allgemeinen Einschätzung ihrer Bedeutung. Insbesondere die Pionierarbeiten werden inzwischen als bekannt vorausgesetzt und nicht mehr explizit zitiert. Interessanterweise ist seine nach 1945 meist zitierte Arbeit nicht eine der Pionierarbeiten zur Quantenphysik oder Relativitätstheorie, sondern jene aus dem Jahr 1935 zum berühmten Einstein-Podolsky-Rosen-Paradoxon.

  4. Two Piece Compaction Die Design

    SciTech Connect

    Coffey, Ethan N

    2010-03-01

    Compaction dies used to create europium oxide and tantalum control plates were modeled using ANSYS 11.0. Two-piece designs were considered in order to make the dies easier to assemble than the five-piece dies that were previously used. The two areas of concern were the stresses at the interior corner of the die cavity and the distortion of the cavity wall due to the interference fit between the two pieces and the pressure exerted on the die during the compaction process. A successful die design would have stresses less than the yield stress of the material and a maximum wall distortion on the order of 0.0001 in. Design factors that were investigated include the inner corner radius, the value of the interference fit, the compaction force, the size of the cavity, and the outer radius and geometry of the outer ring. The results show that for the europium oxide die, a 0.01 in. diameter wire can be used to create the cavity, leading to a 0.0055 in. radius corner, if the radial interference fit is 0.003 in. For the tantalum die, the same wire can be used with a radial interference fit of 0.001 in. Also, for the europium oxide die with a 0.003 in. interference fit, it is possible to use a wire with a diameter of 0.006 in. for the wire burning process. Adding a 10% safety factor to the compaction force tends to lead to conservative estimates of the stresses but not for the wall distortion. However, when the 10% safety factor is removed, the wall distortion is not affected enough to discard the design. Finally, regarding the europium oxide die, when the cavity walls are increased by 0.002 in. per side or the outer ring is made to the same geometry as the tantalum die, all the stresses and wall distortions are within the desired range. Thus, the recommendation is to use a 0.006 in. diameter wire and a 0.003 in. interference fit for the europium oxide die and a 0.01 in. diameter wire and a 0.001 in. interference fit for the tantalum die. The dies can also be made to have the

  5. Technische Systeme für den Herzersatz und die Herzunterstützung

    NASA Astrophysics Data System (ADS)

    Schöb, Reto; Loree, Howard M.

    Herzkrankheiten verursachen allein in den Vereinigten Staaten jährlich mehr als 700’000 Todesfälle. Ungefähr 3 Millionen Patienten in den U.S.A. leiden gemäss der American Heart Association (AHA) und dem National Heart, Lung and Blood Institute (NHLBI) an kongestivem Herzversagen (Congestive Heart Failure, CHF), welches eine chronische, sehr entkräftende und degenerative Krankheit ist: Das Herz ist dabei unfähig, hinreichend Blut zu den Organen des Körpers zu pumpen. Über 400’000 Fälle von CHF werden jedes Jahr diagnostiziert. Ähnliche Zahlen werden für Europa und Japan zusammen geschätzt. Basierend auf Daten vom AHA und NHLBI beträgt die fünfjährige Überlebensrate für CHF-Patienten lediglich etwa 50% [1]. 70’000-120’000 dieser Patienten könnten von einer Herzverpflanzung profitieren. 1999 wurden in den USA aber nur 2185 Herztransplantationen durchgeführt während die Warteliste über 4000 Patienten beträgt [2]. Ein akuter Mangel an Spenderherzen und die enormen Kosten (250’000-400’000 USD pro Patient) sind die begrenzenden Faktoren für Herztransplantationen [3]. Dies bedeutet, dass eine riesige Anzahl von Patienten durch ein zuverlässiges und verschleissfreies, nichtthrombotisches, total implantierbares, künstliches Herz gerettet werden könnten. Bis heute jedoch kein derartiges Implantat kommerziell verfügbar.

  6. Dying and multiplying life.

    PubMed

    Rodríguez-Arias, David

    2014-09-01

    It was only after James P. Lovette's death, in 2006, that I discovered that the twenty-four-year-old colleague and friend with whom I had spent so many afternoons debating issues in organ transplantation had been the first successful child heart transplantee in the world and one of the longest-living survivors of a second transplant. During the years we met, he never even hinted at the fact that three different hearts had beaten in his chest. The revelation that his life had been an almost uninterrupted chain of medical challenges suddenly made me appreciate his quirkiness in a whole new light. Organ transplantation crudely exemplifies a traditional moral dilemma between means and ends: in order to save a life, someone else has to die. Bioethicists involved in this field have the role of identifying the ethical issues surrounding organ donation and helping others to argue in an intelligible and convincing way. In my view, bioethicists have the obligation to foster a discussion as open and transparent as possible on these matters. Still, I sometimes fear that I may be helping to cause unnecessary harms to potential recipients who are desperately waiting for a vital organ. Scholars would be chillingly cold if their quest for truth systematically came at the cost of lives lost. Every life can be meaningful and provide meaning to many others. This is true even with organ recipients, who often have short lives full of considerable suffering. PMID:25231665

  7. The Dying Day

    NASA Astrophysics Data System (ADS)

    Heiles, Carl

    1993-05-01

    The 85-foot telescope's dying day was part of a week of memorably unusual weather---which, in turn, was part of a memorable winter in California (and elsewhere!). On this day, it spent several hours finishing a months-long, apparently successful observation of Zeeman splitting of the 18-cm OH lines in absorption against the Galactic center continuum source Sgr A. Later, it continued a survey of weak diffuse radio recombination lines near the Galactic plane---observations that were interrupted by strong winds, which made the telescope move to the stow position. We know the rest. Had the telescope not been destroyed, it would have been reconfigured the following day to observe the 21-cm line. It would have continued an ongoing survey of interstellar magnetic fields using Zeeman splitting of the 21-cm line. It would have begun a search for broad, weak line wings, which had been previously discovered in association with supernova remnants. It would have been involved in a number of H I mapping projects. And it would have continued its measurements of diffuse radio recombination lines. Had it not been for the inclement weather, the weekend would have seen it being used in laboratory exercises for undergraduates at UC Berkeley.

  8. Zelltyp-spezifische Mikroanalyse von Arabidopsis thaliana-Blättern

    NASA Astrophysics Data System (ADS)

    Brandt, Stephan Peter

    2002-04-01

    Im ersten Teil der Arbeit wurden Strategien zur Analyse von Transkripten erarbeitet. Die ersten Versuche zielten darauf ab, in mit Glaskapillaren genommenen Einzelzellproben verschiedener Gewebeschichten RT-PCR durchzuführen, um spezifische Transkripte nachweisen zu können. Dies gelang für eine Reihe von Genen aus verschiedenen Pflanzenspezies. Dabei konnten sowohl Transkripte stark wie auch schwach exprimierter Gene nachgewiesen werden. Für die Erstellung von Gewebe-spezifischen Expressionsprofilen war es notwendig, die in vereinigten Zellproben enthaltene mRNA zunächst zu amplifizieren, um eine ausreichende Menge für Arrayhybridisierungen zu erhalten. Vor der Vermehrung wurde die mRNA revers transkribiert. Es wurden daran anschließend verschiedene Amplifikationsstrategien getestet: Die neben Tailing, Adapterligation und anderen PCR-basierenden Protokollen getestete Arbitrary-PCR hat sich in dieser Arbeit als einfache und einzige Methode herausgestellt, die mit so geringen cDNA-Mengen reproduzierbar arbeitet. Durch Gewebe-spezifische Array-hybridisierungen mit der so amplifizierten RNA konnten schon bekannte Expressionsmuster verschiedener Gene, vornehmlich solcher, die an der Photosynthese beteiligt sind, beobachtet werden. Es wurden aber auch eine ganze Reihe neuer offensichtlich Gewebe-spezifisch exprimierter Gene gefunden. Exemplarisch für die differentiell exprimierten Gene konnte das durch Arrayhybridisierungen gefundene Expressionsmuster der kleinen Untereinheit von Rubisco verifiziert werden. Hierzu wurden Methoden zum Gewebe-spezifischen Northernblot sowie semiquantitativer und Echtzeit-Einzelzell-RT-PCR entwickelt. Im zweiten Teil der Arbeit wurden Methoden zur Analyse von Metaboliten einschließlich anorganischer Ionen verwendet. Es stellte sich heraus, daß die multiparallele Methode der Gaschromatographie-Massenspektrometrie keine geeignete Methode für die Analyse selbst vieler vereinigter Zellinhalte ist. Daher wurde auf

  9. Renaturierung von Feuchtgrünland, Auengrünland und mesophilem Grünland

    NASA Astrophysics Data System (ADS)

    Rosenthal, Gert; Hölzel, Norbert

    Grünland stellt in Mitteleuropa fast ausschließlich eine Kulturformation dar, die in der Naturlandschaft abgesehen von extremen Trocken- und Nassstandorten sowie klimatisch ungünstigen Gebieten oberhalb der alpinen Waldgrenze nur kleinflächig vertreten war.Die natürlichen Standorte der heutigen Grünlandarten waren in Mitteleuropa bis in das Atlantikum hinein Wälder oder natürlicherweise waldfreie ökosysteme, wie z.B. Röhricht- und Ufervegetation sowie Biberwiesen in Flussauen, Niedermoore, Randlaggs von Regenmooren, Waldlichtungen oder Lawinenbahnen (Ellenberg 1952, 1996). Die Naturlandschaft der heutigen Grünlandstandorte war durch die natürliche Dynamik der vorherrschenden Waldökosysteme mit ihren Entwicklungsstadien und natürlichen Störungsereignissen (Stürme, überschwemmungen etc.) geprägt. Der Flächenanteil des Grünlandes vergrößerte sich erst durch Beweidung und Heumahd durch den Menschen und seine Haustiere.

  10. Dr. von Braun Briefing Walt Disney

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Dr. von Braun began his association with Walt Disney in the 1950s when the rocket scientist appeared in three Disney television productions related to the exploration of space. Years later, Dr. von Braun invited Disney and his associates to tour the Marshall Space Flight Center (MSFC) in Huntsville, Alabama. This photograph is dated April 13, 1965. From left are R.J. Schwinghamer from the MSFC, Disney, B.J. Bernight, and Dr. von Braun.

  11. Versuche zur Gewinnung von katalytischen Antikörpern zur Hydrolyse von Arylcarbamaten und Arylharnstoffen. (English Title: Attempts to produce catalytic antibodies for hydrolysis of arylcarbamates and arylureas)

    NASA Astrophysics Data System (ADS)

    Werner, Deljana

    2002-05-01

    Im Rahmen dieser Arbeit gelang es, katalytische Antikörper zur Hydrolyse von Benzylphenylcarbamaten sowie zahlreiche monoklonale Antikörper gegen Haptene herzustellen. Es wurden verschiedene Hapten-Protein-Konjugate unter Verwendung unterschiedlicher Kopplungsmethoden hergestellt und charakterisiert. Zur Generierung der hydrolytisch aktiven Antikörper wurden Inzuchtmäuse mit KLH-Konjugaten von 4 Übergangszustandsanaloga (ÜZA) immunisiert. Mit Hilfe der Hybridomtechnik wurden verschiedene monoklonale Antikörper gegen diese ÜZA gewonnen. Dabei wurden sowohl verschiedene Immunisierungsschemata als auch verschiedene Inzuchtmausstämme und Fusionstechniken verwendet. Insgesamt wurden 32 monoklonale Antikörper gegen die verwendeten ÜZA selektiert. Diese Antikörper wurden in groen Mengen hergestellt und gereinigt. Zum Nachweis der Antikörper-vermittelten Katalyse wurden verschiedene Methoden entwickelt und eingesetzt, darunter immunologische Nachweismethoden mit Anti-Substrat- und Anti-Produkt-Antikörpern und eine photometrische Methode mit Dimethylaminozimtaldehyd. Der Nachweis der hydrolytischen Aktivität gelang mit Hilfe eines Enzymsensors, basierend auf immobilisierter Tyrosinase. Die Antikörper N1-BC1-D11, N1-FA7-C4, N1-FA7-D12 und R3-LG2-F9 hydrolysierten die Benzylphenylcarbamate POCc18, POCc19 und Substanz 27. Der Nachweis der hydrolytischen Aktivität dieser Antikörper gelang auch mit Hilfe der HPLC. Der katalytische Antikörper N1-BC1-D11 wurde kinetisch und thermodynamisch untersucht. Es wurde eine Michaelis-Menten-Kinetik mit Km von 210 µM, vmax von 3 mM/min und kcat von 222 min-1 beobachtet. Diese Werte korrelieren mit den Werten der wenigen bekannten Diphenylcarbamat-spaltenden Abzyme. Die Beschleunigungsrate des Antikörpers N1-BC1-D11 betrug 10. Das ÜZA Hei3 hemmte die hydrolytische Aktivität. Dies beweist, dass die Hydrolyse in der Antigenbindungsstelle stattfindet. Weiter wurde zwischen der Antikörperkonzentration und der

  12. Franz von Leydig (1821-1908), pioneer of comparative histology.

    PubMed

    Schneider, Marlon R

    2012-05-01

    Franz von Leydig, a German histologist and zoologist, is known to every student of human or animal anatomy because of the testicular testosterone-producing cells carrying his name. However, he made many contributions to our knowledge of the fine structure of animal tissues, including more than 200 scientific articles and several books. His most important work, the book Lehrbuch der Histologie des Menschen und der Thiere, established him as a pioneer if not the founder of comparative histology. Leydig taught at three different universities (Würzburg, Tübingen and Bonn) and received many honours from scientific organizations worldwide, including the Royal Society. He died in Rothenburg ob der Tauber, the town of his birth, aged 86 years.

  13. Improving care of dying children.

    PubMed Central

    Martinson, I M

    1995-01-01

    Every year about 5,000 children aged 0 to 14 years need hospice care in the United States. Children seem to know that they are dying, although this is difficult for parents to accept. Clear, empathic understanding is needed. Communication with clarity and understanding is imperative with the changes in goals from cure to palliation to comfort. The ideal place for most dying children is at home, where symptoms can be managed as effectively as in a hospital. PMID:7571589

  14. REFRACTORY DIE FOR EXTRUDING URANIUM

    DOEpatents

    Creutz, E.C.

    1959-08-11

    A die is presented for the extrusion of metals, said die being formed of a refractory complex oxide having the composition M/sub n/O/sub m/R/sub x/O/sub y/ where M is magnesium, zinc, manganese, or iron, R is aluminum, chromic chromium, ferric iron, or manganic manganese, and m, n, x, and y are whole numbers. Specific examples are spinel, magnesium aluminate, magnetite, magnesioferrite, chromite, and franklinite.

  15. Dying at the best time.

    PubMed

    Seale, C; Addington-Hall, J

    1995-03-01

    These are the results of two surveys of relatives, and others who knew people who had died, describing events in the year before death and their views on the time of the person's death. Those surveyed were identified from death certificates in England. The main focus is on a sample of 3696 people dying in 1990 in 20 health authorities, with supporting analysis from an earlier national sample of 639 people dying in 1987. Variation in peoples' views about whether an earlier death would have been better is reported, in the context of debate about euthanasia. Spouses were less likely than others to feel that it would have been better if the person had died earlier, and this held true even when controlling for the deceaseds' levels of pain, distress, dependency and age. Spouses were more likely than others to say that a later death would have been better, though not in cases where the deceased was reported as having said they wanted to die sooner. Spouses were influenced by the loss which the death of the person represented for them, being more likely than others to say they missed the person who died a great deal, and feel loneliness was a big problem. Non spouses (children and other relatives of the deceased, friends, neighbours and a few officials) on the other hand were more likely than spouses to say an earlier death would have been better, even when levels of pain, distress, dependency and age were controlled for.(ABSTRACT TRUNCATED AT 250 WORDS)

  16. Automatische Lokalisation und hämodynamische Charakterisierung von Gefäßstrukturen bei arteriovenösen Malformationen

    NASA Astrophysics Data System (ADS)

    Forkert, Nils Daniel; Säring, Dennis; Fiehler, Jens; Illies, Till; Handels, Heinz

    Im Beitrag werden Verfahren zur automatischen Detektion des Kerns der Arteriovenösen Malformation (AVM) sowie der zuleitenden (Feeder), ableitenden (Drainagevenen) und en passge" Blutgef äße präsentiert. Als Eingabe hierfür dienen hochaufgelöste 3D- sowie zeitlich-räumliche 4D-MRT-Bildsequenzen. Durch eine kombinierte Analyse der Intensität, der Geschwindigkeit und des relativen Einflusszeitpunktes des Blutes werden Gefäßstrukturen automatisch charakterisiert. Die vorgestellte Methode zur Detektion des Kerns wurde anhand von manuellen Segmentierungen validiert und ergab eine mittlere Volumen- übereinstimmung von ca. 88%. Drainagevenen und Feeder konnten mit einer Genauigkeit von 95% detektiert werden.

  17. Dr. Wernher Von Braun greeting dignitaries.

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Dr. Wernher Von Braun, left, greets vice president Spiro T. Agnew in the Launch Control Center for the Apollo 14 mission. Between Dr. Von Braun and Mr. Agnew are their Royal Highnesses, The Prince and Princess of Spain. The royal visitors greeted the launch control team in th enter after the launch of Apollo 14.

  18. Dr. Wernher Von Braun at a picnic.

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Dr. Wernher Von Braun, director of the Marshall Space Flight Center, stakes claim to a table for the picnic celebrating man's first lunar landing. With Dr. Von Braun are his wife, Maria (seated, right), and son, Peter (back to camera). His daughter, Margrit, was also present, but is hidden from view by friends in this view.

  19. Walt Disney and Dr. Wernher von Braun

    NASA Technical Reports Server (NTRS)

    1954-01-01

    Dr. Werhner von Braun, then Chief, Guided Missile Development Operation Division at Army Ballistic Missile Agency (ABMA) in Redstone Arsenal, Alabama, was visited by Walt Disney in 1954. In the 1950's, von Braun worked with Disney Studio as a technical director, making three films about space exploration for television. A model of the V-2 rocket is in background.

  20. Ludwig von Mises: An Annotated Bibliography.

    ERIC Educational Resources Information Center

    Gordon, David

    A 117-item annotated bibliography of books, articles, essays, lectures, and reviews by economist Ludwig von Mises is presented. The bibliography is arranged chronologicaly, and is followed by an alphabetical listing of the citations, excluding books. An index and information on the Ludwig von Mises Institute at Auburn University (Alabama) are…

  1. Internet-Einzelhandel bei Multi-Channel-Unternehmen

    NASA Astrophysics Data System (ADS)

    Breidenbach, Petra; Rauh, Jürgen

    Die unterschiedliche Bedeutung des Internets zu Informations- und Kaufzwecken konnte anhand von quantitativen Online-Befragungen von Konsumenten bei Multi-Channel-Anbietern verschiedener Bedarfsfristigkeitsstufen aufgezeigt werden. Insbesondere der Wechsel zwischen verschiedenen Vertriebskanälen (Multi-Channel-Verhalten) ist sowohl mit verkehrsubstituierenden als auch verkehrgenerierenden Effekten verbunden.Dabei können von der reinen Virtualisierung von Konsumtätigkeiten durch das Internet bei Informationsprozessen Einsparungspotenziale von Informations-(such-)-Verkehr abgeleitet werden. Einsparungseffekte aufgrund von Online-Käufen stehen in Zusammenhang mit den Wechselwirkungen zwischen unternehmerischen Maßnahmen sowie vertriebskanal- und produktspezifische Akzeptanz der Konsumenten zur Nutzung des Internets. Die siedlungsstrukturelle Einordnung der Wohnorte der Konsumenten sowie unternehmerische Vertriebsnetzstrukturensind bei der Bewertung verkehrlicher Wirkung von hoher Relevanz.

  2. Das Universum der Sterne. Himmelsbeobachtungen und Streifzüge durch die moderne Astronomie.

    NASA Astrophysics Data System (ADS)

    Rowan-Robinson, M.

    This book is a German translation, by M. Röser, of the English original published in 1990 (see 52.003.046). Contents: 1. Der Halleysche Komet. 2. Alpha Centauri - Der sonnennächste Stern. 3. Sirius und sein Begleiter, ein Weißer Zwerg. 4. Polaris - Der Polarstern. 5. Wega - Ein Planetensystem im Entstehen? 6. Mira - Der erste bekannte veränderliche Stern. 7. Der Ring-Nebel - "Todeskampf" eines sonnenähnlichen Sterns. 8. Der Orion-Nebel - Die Geburt neuer Sterne. 9. Delta Cephei - Die Meßlatte des Weltalls. 10. Algol - Der Teufelsstern. 11. Nova Aquilae - Der neue Stern von 1918. 12. Der Krebs-Nebel - Die Supernova des Jahres 1054. 13. Die Hyaden und Plejaden - Sternhaufen. 14. Die Milchstraße - Unsere Galaxis. 15. Die Magellanschen Wolken - Unsere Nachbarn im Weltall. 16. Der Andromeda-Nebel - Zwilling unserer Galaxis. 17. Messier 87 - Eine Radiogalaxie. 18. 3C 273 - Rätselhafter Quasar. 19. Messier 82 - Eine "Starburst"-Galaxie. 20. Der Virgo-Haufen - Ein reicher Galaxienhaufen. 21. Das Universum.

  3. Dr. Wernher von Braun In His Office

    NASA Technical Reports Server (NTRS)

    1964-01-01

    Dr. Wernher von Braun served as Marshall Space Flight Center's first director from July 1, 1960 until January 27, 1970, when he was appointed NASA Deputy Associate Administrator for Planning. Following World War II, Dr. von Braun and his German colleagues arrived in the United States under Project Paperclip to continue their rocket development work. In 1950, von Braun and his rocket team were transferred from Ft. Bliss, Texas to Huntsville, Alabama to work for the Army's rocket program at Redstone Arsenal and later, NASA's Marshall Space Flight Center. Under von Braun's leadership, Marshall developed the Saturn V launch vehicle which took Apollo astronauts to the moon. This photo depicts von Braun in his office at MSFC.

  4. Use of RSP Tooling to Manufacture Die Casting Dies

    SciTech Connect

    Kevin McHugh

    2004-07-01

    The technology and art used to construct die casting dies has seen many improvements over the years. However, the time lag from when a design is finalized to the time a tool is in production has remained essentially the same. The two main causes for the bottleneck are the need to qualify a part design by making prototypes (usually from an alternative process), and the production tooling lead time after the prototypes are approved. Production tooling costs are high due to the labor and equipment costs associated with transforming a forged block of tool steel into a finished tool. CNC machining, sink EDM, benching, engraving and heat treatment unit operations are typically involved. As a result, there is increasing interest in rapid tooling (RT) technologies that shorten the design-to-part cycle and reduce the cost of dies. There are currently more than 20 RT methods being developed and refined around the world (1). The "rapid" in rapid tooling suggests time compression for tool delivery, but does not address robustness as nearly all RT approaches are intended for low-volume prototype work, primarily for molding plastics. Few options exist for die casting. An RT technology suitable for production-quality tooling in the time it normally takes for prototype tooling is highly desirable. In fact, there would be no need for a distinction between prototype and production tooling. True prototype parts could be made using the same processing conditions and materials intended for production. Qualification of the prototype part would allow the manufacturer to go directly into production with the same tool. A relatively new RT technology, Rapid Solidification Process (RSP) Tooling, is capable of making production-quality tooling in an RT timeframe for die casting applications. RSP Tooling, was developed at the Idaho National Engineering and Environmental Laboratory (INEEL), and commercialized with the formation of RSP Tooling, LLC (2). This paper describes the process, and

  5. Clinical management of dying patients.

    PubMed Central

    Gavrin, J; Chapman, C R

    1995-01-01

    Dying is universal, and death should be a peaceful time. Myriad comfort measures are available in the last weeks before life ends. Discussions about end-of-life issues often suffer from lack of informed opinion. Palliative care experts have identified specific somatic and psychological sources of distress for dying patients and their loved ones. Pain, shortness of breath, nausea and vomiting, and fear of abandonment contribute substantially to both physical and psychological discomfort toward the end of life. Simple, effective methods exist for relieving those symptoms. Knowledge about the natural events associated with dying and an informed approach to medical and psychological interventions contribute to systematic and successful comfort care. We describe the origin of physical and psychological distress at the end of life and provide strategies for alleviating many of the discomforts. PMID:7571591

  6. Acting to let someone die.

    PubMed

    McGee, Andrew

    2015-02-01

    This paper examines the recent prominent view in medical ethics that withdrawing life-sustaining treatment (LST) is an act of killing. I trace this view to the rejection of the traditional claim that withdrawing LST is an omission rather than an act. Although that traditional claim is not as problematic as this recent prominent view suggests, my main claim is that even if we accepted that withdrawing LST should be classified as an act rather than as an omission, it could still be classified as letting die rather than killing. Even though omissions are contrasted with acts, letting die need not be, for one can let die by means of acts. The remainder of the paper is devoted to establishing this claim and addresses certain objections to it.

  7. On dying and human suffering.

    PubMed

    Kellehear, A

    2009-07-01

    This review compares and contrasts the major reoccurring themes in two sources of research literature - social studies of dying and human suffering. The purpose of such a comparison is to employ the major insights of each field as a useful method of critically evaluating the insights of the other. Critical exchanges and comparisons between the research area of dying studies and on human suffering have been modest to date. This article will explain that the experience of dying benefits from being situated and analysed in a broader context of cultural experience, as suggested by the theory and study of human suffering. Conversely, the theory and methods involved in studies of human suffering can gain from a mortal view of vulnerability, grief, social ambiguity and identity changes characteristic of experiences at the end of life.

  8. Clinical management of dying patients.

    PubMed

    Gavrin, J; Chapman, C R

    1995-09-01

    Dying is universal, and death should be a peaceful time. Myriad comfort measures are available in the last weeks before life ends. Discussions about end-of-life issues often suffer from lack of informed opinion. Palliative care experts have identified specific somatic and psychological sources of distress for dying patients and their loved ones. Pain, shortness of breath, nausea and vomiting, and fear of abandonment contribute substantially to both physical and psychological discomfort toward the end of life. Simple, effective methods exist for relieving those symptoms. Knowledge about the natural events associated with dying and an informed approach to medical and psychological interventions contribute to systematic and successful comfort care. We describe the origin of physical and psychological distress at the end of life and provide strategies for alleviating many of the discomforts.

  9. Care of the Dying Adolescent

    PubMed Central

    MacDonald, Faye

    1979-01-01

    This is a description of the obstacles encountered in the management of one 17 year old patient dying with malignant melanoma. Various areas are seen to contribute to the difficulties including the “health care system” (specifically the hospital environment), the patient himself, his family, his disease and its treatment, and his physician(s). An increased awareness of the difficulties would be helpful to those of us not frequently encountering the responsibility of caring for a dying adolescent. The details have been left vague or slightly changed in this real case to respect the privacy of those involved. PMID:21297759

  10. [Dying with cancer: Hollywood lessons].

    PubMed

    Niemeyer, Fernanda; Kruse, Maria Henriqueta Luce

    2013-12-01

    The study attempts to understand how dying from cancer is portrayed by five movies produced in Hollywood between 1993 and 2006. Based on the cultural studies and their post-structuralism version and supported by the notions of discourse and subjectivity, as proposed by philosopher Michel Foucault, we suggest one of the possible readings of the movie picture corpus. We assess how the movie picture discourse acts as a cultural pedagogy that produces ways of seeing dying with cancer: immortalizing the healthy body image, silencing death, taking care of the dead body and, finally, accepting death. Our proposal is intended to stimulate reflections that may contribute to care and education in nursing.

  11. Portable punch and die jig

    DOEpatents

    Lewandowski, Edward F.; Anderson, Petrus A.

    1978-01-01

    A portable punch and die jig includes a U-shaped jig of predetermined width having a slot of predetermined width in the base thereof extending completely across the width of the jig adapted to fit over the walls of rectangular tubes and a punch and die assembly disposed in a hole extending through the base of the jig communicating with the slot in the base of the jig for punching a hole in the walls of the rectangular tubes at precisely determined locations.

  12. [Von Hippel-Lindau syndrome].

    PubMed

    Reich, H; Hollwich, F

    1984-06-01

    The von Hippel-Lindau syndrome is an autosomal dominant condition that comprises, apart from angiomas of the retina, the cerebellum, the spinal cord, and the cerebrum, also cystic and blastomatous dysplasias resulting from maldevelopment, namely cystic kidney and pancreas, hypernephroma, and pheochromocytoma. Early observers of the syndrome were the English neurologist John Hughlings Jackson (1872) and the German ophthalmologist Hugo Magnus (1874). The typical association of angiomas of the retina with the cerebellum was first described in 1905 by the Prague ophthalmologist Wilhelm Czermak, long before Lindau (1926). The fact that hypernephromas and pheochromocytomas may form parts of it characterizes the syndrome as a polyneoplastic hereditary disease and the sufferers as members of families at risk. Since the ophthalmologist is often the first to recognize this disease by direct inspection of the fundi, he is responsible for ensuring proper medical care for the affected person and his or her entire family.

  13. A good way to die.

    PubMed

    Trueland, Jennifer

    2016-03-23

    An end of life care service is providing joined-up care for patients. Care co-ordinators arrange packages of care so patients can die in the place of their choice – often at home. The result is high satisfaction rates among patients, families and staff.

  14. Attitudes on Death and Dying.

    ERIC Educational Resources Information Center

    Andrus, Charles E.

    This paper explored attitudes toward death and dying revealed through interviews with members of the clergy, the medical profession, funeral directors, nursing home residents, and selected others. The sampling was small and results are not intended to be representative of the groups to which these people belong. Rather, the study may be used as a…

  15. Robert Merton Dies at 92

    ERIC Educational Resources Information Center

    Snell, Joel C.

    2006-01-01

    This article features Robert Merton, who died recently at age 92. Merton came into this world as a Jewish baby named Meyer Schkolnick. He lived in South Philly where his parents wrenched a living as blue-collar workers. Merton chose an Anglicized name to move into the Yankee dominated America of the 20's and 30's. At Harvard, he studied under…

  16. Bewertung von Fahrerassistenzsystemen mittels der Vehicle in the Loop-Simulation

    NASA Astrophysics Data System (ADS)

    Bock, Thomas

    Mit der Vehicle in the Loop-Simulation hat Audi eine Test- und Simulationsumgebung für Fahrerassistenzsysteme entwickelt, welche die Vorzüge eines realen Versuchsfahrzeugs mit der Sicherheit und Reproduzierbarkeit von Fahrsimulatoren kombiniert. Virtueller Fremdverkehr, Straßenbegrenzungen oder sonstige simulierte Gegenstände werden durch ein "Optical see through Head Mounted Display“ während der Fahrt realitätsnah und kontaktanalog für den Fahrer eingeblendet. Besonders bei der Erprobung aktiver Fahrerassistenzsysteme eröffnen sich durch das Konzept des virtuellen Fremdverkehrs im realen Versuchsfahrzeug neue Möglichkeiten.

  17. [Johannes Anton von Mikulicz-Radecki (1850-1905). His contributions to the development of urology].

    PubMed

    Zajaczkowski, T; Zamann, A M

    2010-02-01

    On June 14, 1905, Johann Anton von Mikulicz-Radecki, one of the most famous surgeons of the time, died. He was a disciple of famous Theodor Billroth of Vienna and the teacher of Ferdinand Sauerbruch in Breslau. Mikulicz-Radecki's merits in the field of the history of medicine are based on his achievements in developing the system of antisepsis and asepsis. He also devoted himself to urological surgery, and his name is linked with diseases, operations, and construction of new medical instruments. Mikulicz-Radecki created two surgical schools, one in Cracow and a second one in Breslau, where he worked for over 15 years until his death.

  18. The photographers of the Venus transit of 1874 (German Title: Die Photographen des Venusdurchgangs von 1874)

    NASA Astrophysics Data System (ADS)

    Duerbeck, Hilmar W.

    Apart from the photo-pioneer Hermann Krone from Dresden, little is known about the photographers who took part in the German expeditions for the observation of the Venus transit of 1874. We give a short overview of the photographic methods and instruments employed at that time, present biographic details about O. Eschke, G. Fritsch, C. Kardaetz. F. Stolze, Th. Studer and G. Wolfram, give some details on the expeditions and their final destinations, and show a few rare photographic documents. We also give a transcription of the letters of G. Fritsch written to Wilhelm Foerster in the course of the Persian expedition.

  19. Die Cnidogenese der Octocorallia (Anthozoa, Cnidaria): II. Reifung, Wanderung und Zerfall von Cnidoblast und Nesselkapsel

    NASA Astrophysics Data System (ADS)

    Schmidt, H.; Moraw, B.

    1982-03-01

    Migration of cnidoblasts has never been observed in Anthozoa. In contrast to hydrozoans, anthozoans are repeatedly reported to develop nematocysts locally without migration in the entoderm as well as in the ectoderm. The majority of the nematocysts studied in different Octocorallia species (Alcyonaria: Alcyonarium digitatum, Parerythropodium coralloides; Gorgonaria: Pseudopterogorgia aerosa; Pennatularia: Veretillum cynomorium) originate from the ectoderm of the scapus, where, however, no mature nematocysts occur. Cnidoblasts containing immature nematocysts accumulate in the distal scapus, from where they migrate singly like amoebae into the pinnulae of the tentacles. The nematocysts mature during migration, during which the capsular matrix becomes completely electron-translucent. Only in the oral disc, where few nematocysts occur, do they mature locally without migration. In the Octocorallia, nematocyst development and maturation takes places only in the ectoderm. Development of nematocysts has never been observed in the entoderm, nor in the pharynx; this demonstrates its entodermal origin. The entoderm contains only degenerated or phagocytized nematocysts. Contrary to hydrozoans, the mature anthozoan cnidocyte is rounded and has no processes to the mesogloea. Instead of a cnidocil it has a ciliary cone consisting of a normal flagellum, stereocilia and macrovilli. The cnidocyte is characterised by abundant electron-translucent cytoplasm and nematocyst-anchoring structures made up of cross-striated, collagen-like fibrillae and a fibrous basal ring. The position of the cross-striated fibrillae is distally similar to that of the supportive rods in hydrozoan cnidoblasts. The present study clearly demonstrates that structure and, possibly, function of an octocorallian cnidocyte is much simpler than that of a hydrozoan cnidocyte. On the other hand, cnidoblast migration, occurring in Hydrozoa as well in Octocorallia, turned out to be a much older phylogenetic character than was formerly believed.

  20. Die Cnidogenese der Octocorallia (Anthozoa, Cnidaria): I. Sekretionund Differenzierung von Kapsel und Schlauch

    NASA Astrophysics Data System (ADS)

    Schmidt, H.

    1981-12-01

    The ultrastructural differentiation of capsule and its relation to tube development is described in several Octocorallia species (Alcyonaria: Alcyonium digitatum, Parerythropodium coralloides, Cornularia cornucopiae, Paralcyonium elegans; Pennatularia: Pteroeides spinosum, Veretillum cynomorium; Gorgonaria: Pseudopterogorgia aerosa), all of which have only one type nematocyst. In the Octocorallia, capsule and tube are secreted successively by the Golgi apparatus associated with a primary centriolar complex. During the secretion of the external tube, the outer capsular wall (sclera) is structurally differentiated; inside the capsule the material of the inner capsular wall is separated from the later capsular content (matrix). The primary wall differentiation enables the capsules to “grow” after capsular secretion has been completed. Following tube secretion, the external tube is completely transferred into the capsule, without the tube wall being transformed into capsular wall, as previously suggested (Westfall, 1966; Ivester, 1977). During early invagination of the tube wall, the coarse, granulated matrix of the external tube is transferred into the internal tube. From this material the spines are developed, which are observed before the tube is completely transferred into the capsule. By a secondary wall differentiation the previously structureless inner capsular wall changes to a complex structure, extending again the capsule, thus mixing the capsular content and enabling the tube to shift to a position, which corresponds with that of mature capsules. These observations demonstrate for the first time the differentiation of the capsule and its close relationship to the differentiation of the tube in nematocysts of Octocorallia.

  1. Hydrogeologisches Konzeptmodell von München: Grundlage für die thermische Grundwassernutzung

    NASA Astrophysics Data System (ADS)

    Kerl, Marco; Runge, Nicolas; Tauchmann, Horst; Goldscheider, Nico

    2012-09-01

    The Munich Gravel Plain has been studied under various aspects, but there has been no detailed hydrogeological underground model of the entire city area. As a result of the "urban heat-island" effect, groundwater temperatures reach 18 °C and locally exceed 20 °C. This aquifer is therefore suitable for systematic and large-scale near-surface geothermal energy exploitation. The goal of this study was to establish the first detailed hydrogeological model of the city of Munich, as a basis for estimating the geothermal potential. A database of more than 20,000 drill holes was available, of which 730 were selected, interpreted and processed. As a result, 26 east-west cross sections were constructed, showing the geometry and structure of the aquifer and the position of the unconfined water table during low, average and high-water conditions. Based on these profiles and basic hydraulic considerations, a groundwater flow rate of about 3 m3/s was established. Results of this study indicate a high potential for thermal groundwater use and corresponding reductions of heating oil consumption and CO2 emissions. At the same time, thermal rehabilitation of the overheated urban groundwater could be achieved. The quantification of this geothermal potential and the space-time optimisation of thermal groundwater use for heating and cooling require a detailed analysis of groundwater temperatures and numerical groundwater flow and heat transport modelling.

  2. Die Makrofauna und ihre Verteilung im Nordost-Felswatt von Helgoland

    NASA Astrophysics Data System (ADS)

    Janke, Klaus

    1986-03-01

    The macrofauna and its distribution in the sheltered, rocky intertidal zone of Helgoland (North Sea) was studied at 9 vertically and/or morphologically different stations from March to September in 1984. Seasonal variations in the communities were described based on each species' “conspicuousness”. A total of 172 species was found. The macrofauna shows a zoned pattern, but also the different substrata, for example, affect its distribution. The number of species increases from the upper intertidal to the upper sublittoral zone from 23 to 133 species. The upper intertidal is characterized by Littorina saxatilis, Chaetogrammarus marinus and Hyale nilssonii. Typical and abundant species of the middle and lower intertidal are Flustrellidra hispida, Littorina mariae/obtusata, Littorina littorea, Mytilus edulis and Spirorbis spirorbis. The upper sublittoral zone is characterized by Gibbula cineraria and increasing species numbers of Bryozoa, Nemertini and Opisthobranchia. Only few species (e.g. Dynamena pumila, Laomedea flexuosa, Polydora ciliata, Fabricia sabella, Jaera albifrons, Carcinus maenas) occur in the entire intertidal zone. In comparison to other very sheltered shores in Great Britain, which are also dominated by Fucaceae, the macrofauna in the Helgoland intertidal zone lacks several littoral species, such as Patella spp., Monodonta lineata, Gibbula umbilicalis, Littorina neritoides, Chthamalus spp., whereas Littorina littorea and Gibbula cineraria are highly abundant.

  3. Einfluss von Methaneinträgen auf die Hydrochemie des Münsterländer Kiessandzuges

    NASA Astrophysics Data System (ADS)

    Strobel, M.; Wisotzky, F.

    2009-03-01

    The Münsterländer Kiessandzug, a Quaternary trench structure, forms an important groundwater reservoir and is of great importance for the regional drinking water supply in north-west Germany (“Münsterland”). Since 2004, the Ruhr-University Bochum has been investigating the Aldruper Mark, evaluating the quantitative and qualitative potential for drinking water abstraction in the area. Due to intensive agricultural utilisation, a high nitrate influx into groundwater is expected. Therefore, this study was focused on contamination of groundwater with nitrate as well as on the nitrate degradation capacity of the sediments. However, present analyses show low nitrate concentrations and a reductive groundwater environment. To find the causes of these reducing conditions, it is necessary to examine the geological and hydrochemical situation with respect to the environment and the substratum of the investigated area: the MünsterländerCretaceous basin is underlain by Carboniferous sand- and mudstones which are degasing methane to some extent. This methane was detected in deep observation wells in the second aquifer of the Münsterländer Kiessandzug. In its central area, low concentrations of nitrate as well as low sulphate concentrations and positive δ34Ssulfate-isotope data indicate active sulphate reduction is occurring in the groundwater. Furthermore, a corresponding sulphide content was found in these Quaternary soils (“secondary pyrite”). An input of methane in the aquifer is discussed as a possible reason for sulphate reduction in the deep aquifer.

  4. Vergleich von rekombinanten Vaccinia- und DNA-Vektoren zur Tumorimmuntherapie im C57BL/6-Mausmodell

    NASA Astrophysics Data System (ADS)

    Johnen, Heiko

    2002-10-01

    In der vorliegenden Arbeit wurden Tumorimpfstoffe auf der Basis des Plasmid-Vektors pCI, modified vaccinia virus Ankara (MVA) und MVA-infizierten dendritischen Zellen entwickelt und durch Sequenzierung, Western blotting und durchflußzytometrische Analyse überprüft. Die in vivo Wirksamkeit der Vakzinen wurde in verschiedenen Tumormodellen in C57BL/6 Mäusen verglichen. Die auf dem eukaryotischen Expressionsvektor pCI basierende DNA-Vakzinierung induzierte einen sehr wirksamen, antigenspezifischen und langfristigen Schutz vor Muzin, CEA oder beta-Galactosidase exprimierenden Tumoren. Eine MVA-Vakzinierung bietet in den in dieser Arbeit durchgeführten Tumormodellen keinen signifikanten Schutz vor Muzin oder beta-Galactosidase exprimierenden Tumoren. Sowohl humane, als auch murine in vitro generierte dendritische Zellen lassen sich mit MVA – im Vergleich zu anderen viralen Vektoren – sehr gut infizieren. Die Expressionsrate der eingefügten Gene ist aber gering im Vergleich zur Expression in permissiven Wirtszellen des Virus (embryonale Hühnerfibroblasten). Es konnte gezeigt werden, daß eine MVA-Infektion dendritischer Zellen ähnliche Auswirkungen auf den Reifezustand humaner und muriner dendritischer Zellen hat, wie eine Infektion mit replikationskompetenten Vakzinia-Stämmen, und außerdem die Hochregulation von CD40 während der terminalen Reifung von murinen dendritischen Zellen inhibiert wird. Die während der langfristigen in vitro Kultur auf CEF-Zellen entstandenen Deletionen im MVA Genom führten zu einer starken Attenuierung und dem Verlust einiger Gene, die immunmodulatorische Proteine kodieren, jedoch nicht zu einer Verminderung des zytopathischen Effekts in dendritischen Zellen. Die geringe Expressionsrate und die beobachtete Inhibition der Expression kostimulatorischer Moleküle auf dendritischen Zellen kann für eine wenig effektive Induktion einer Immunantwort in MVA vakzinierten Tieren durch cross priming oder die direkte Infektion

  5. Vergleich von rekombinanten Vaccinia- und DNA-Vektoren zur Tumorimmuntherapie im C57BL/6-Mausmodell

    NASA Astrophysics Data System (ADS)

    Johnen, Heiko

    2002-10-01

    In der vorliegenden Arbeit wurden Tumorimpfstoffe auf der Basis des Plasmid-Vektors pCI, modified vaccinia virus Ankara (MVA) und MVA-infizierten dendritischen Zellen entwickelt und durch Sequenzierung, Western blotting und durchflußzytometrische Analyse überprüft. Die in vivo Wirksamkeit der Vakzinen wurde in verschiedenen Tumormodellen in C57BL/6 Mäusen verglichen. Die auf dem eukaryotischen Expressionsvektor pCI basierende DNA-Vakzinierung induzierte einen sehr wirksamen, antigenspezifischen und langfristigen Schutz vor Muzin, CEA oder beta-Galactosidase exprimierenden Tumoren. Eine MVA-Vakzinierung bietet in den in dieser Arbeit durchgeführten Tumormodellen keinen signifikanten Schutz vor Muzin oder beta-Galactosidase exprimierenden Tumoren. Sowohl humane, als auch murine in vitro generierte dendritische Zellen lassen sich mit MVA – im Vergleich zu anderen viralen Vektoren – sehr gut infizieren. Die Expressionsrate der eingefügten Gene ist aber gering im Vergleich zur Expression in permissiven Wirtszellen des Virus (embryonale Hühnerfibroblasten). Es konnte gezeigt werden, daß eine MVA-Infektion dendritischer Zellen ähnliche Auswirkungen auf den Reifezustand humaner und muriner dendritischer Zellen hat, wie eine Infektion mit replikationskompetenten Vakzinia-Stämmen, und außerdem die Hochregulation von CD40 während der terminalen Reifung von murinen dendritischen Zellen inhibiert wird. Die während der langfristigen in vitro Kultur auf CEF-Zellen entstandenen Deletionen im MVA Genom führten zu einer starken Attenuierung und dem Verlust einiger Gene, die immunmodulatorische Proteine kodieren, jedoch nicht zu einer Verminderung des zytopathischen Effekts in dendritischen Zellen. Die geringe Expressionsrate und die beobachtete Inhibition der Expression kostimulatorischer Moleküle auf dendritischen Zellen kann für eine wenig effektive Induktion einer Immunantwort in MVA vakzinierten Tieren durch cross priming oder die direkte Infektion

  6. Wally Schirra Greets Dr. Wernher von Braun

    NASA Technical Reports Server (NTRS)

    1968-01-01

    Apollo 7 Commander Walter M. Schirra, Jr., left, greets Dr. Wernher Von Braun, Director, Marshall Space Flight Center and Dr. Kurt Debus, Right, KSC Director, during a prelaunch mission briefing held at the Florida Spaceport.

  7. Von Hippel-Lindau Disease (VHL)

    MedlinePlus

    ... Funding Information Research Programs Training & Career Awards Enhancing Diversity Find People About NINDS NINDS Von Hippel-Lindau ... News From NINDS | Find People | Training | Research | Enhancing Diversity Careers@NINDS | FOIA | Accessibility Policy | Contact Us | Privacy ...

  8. Dr. von Braun With German Rocket Experimenters

    NASA Technical Reports Server (NTRS)

    1930-01-01

    Dr. von Braun was among a famous group of rocket experimenters in Germany in the 1930s. This photograph is believed to be made on the occasion of Herman Oberth's Kegelduese liquid rocket engine being certified as to performance during firing. From left to right are R. Nebel, Dr. Ritter, Mr. Baermueller, Kurt Heinish, Herman Oberth, Klaus Riedel, Wernher von Braun, and an unidentified person.

  9. The thermal fatigue resistance of H-13 Die Steel for aluminum die casting dies

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The effects of welding, five selected surface coatings, and stress relieving on the thermal fatigue resistance of H-13 Die Steel for aluminum die casting dies were studied using eleven thermal fatigue specimens. Stress relieving was conducted after each 5,000 cycle interval at 1050 F for three hours. Four thermal fatigue specimens were welded with H-13 or maraging steel welding rods at ambient and elevated temperatures and subsequently, subjected to different post-weld heat treatments. Crack patterns were examined at 5,000, 10,000, and 15,000 cycles. The thermal fatigue resistance is expressed by two crack parameters which are the average maximum crack and the average cracked area. The results indicate that a significant improvement in thermal fatigue resistance over the control was obtained from the stress-relieving treatment. Small improvements were obtained from the H-13 welded specimens and from a salt bath nitrogen and carbon-surface treatment. The other surface treatments and welded specimens either did not affect or had a detrimental influence on the thermal fatigue properties of the H-13 die steel.

  10. [Dying with cancer: Hollywood lessons].

    PubMed

    Niemeyer, Fernanda; Kruse, Maria Henriqueta Luce

    2013-12-01

    The study attempts to understand how dying from cancer is portrayed by five movies produced in Hollywood between 1993 and 2006. Based on the cultural studies and their post-structuralism version and supported by the notions of discourse and subjectivity, as proposed by philosopher Michel Foucault, we suggest one of the possible readings of the movie picture corpus. We assess how the movie picture discourse acts as a cultural pedagogy that produces ways of seeing dying with cancer: immortalizing the healthy body image, silencing death, taking care of the dead body and, finally, accepting death. Our proposal is intended to stimulate reflections that may contribute to care and education in nursing. PMID:25080714

  11. Guide for extrusion dies eliminates straightening operation

    NASA Technical Reports Server (NTRS)

    Gyorgak, C. A.; Hoover, R. J.

    1964-01-01

    To prevent distortion of extruded metal, a guidance assembly is aligned with the die. As the metal emerges from the extrusion dies, it passes directly into the receiver and straightening tube system, and the completed extrusion is withdrawn.

  12. Killing, letting die and euthanasia.

    PubMed

    Husak, D N

    1979-12-01

    Medical ethicists debate whether or not the moral assessment of cases of euthanasia should depend on whether the patient is 'killed' or 'allowed to die'. The usual presupposition is that a clear distinction between killing and letting die can be drawn so that this substantive question is not begged. I contend that the categorisation of cases of instances of killing rather than as instances of letting die depends in part on a prior moral assessment of the case. Hence is it trivially rather than substantively true that the distinction has moral significance. But even if a morally neutral (ie non-question begging) distinction could be drawn, its application to the euthanasia controversy is problematic. I illustrate the difficulties of employing this distinction to reach moral conclusions by critically discussing Philippa Foot's recent treatment of euthanasia. I conclude that even if an act of euthanasia is an instance of killing, and there exists a prima facie moral duty not to kill, and no more stringent duty overrides this duty, one still cannot determine such an act to be morally impermissible.

  13. Jewish tradition in death and dying.

    PubMed

    Ross, H M

    1998-10-01

    Death is often a spiritually difficult time for the dying and their families. Judaism approaches dying with some unique views that can differ from other religious traditions. Through an understanding of Jewish tradition, nurses can ease the dying process for Jewish patients and their families.

  14. Contoured Orifice for Silicon-Ribbon Die

    NASA Technical Reports Server (NTRS)

    Mackintosh, B. H.

    1985-01-01

    Die configuration encourages purity and stable growth. Contour of die orifice changes near ribbon edges. As result, silicon ribbon has nearly constant width and little carbon contamination. Die part of furnace being developed to produce high-quality, low-cost material for solar cells.

  15. Satellitengeodäsie und Langbasis-Interferometrie auf der Fundamentalstation Wettzell. Kolloquiumsvorträge anläßlich des 60sten Geburtstages von Prof. Manfred Schneider.

    NASA Astrophysics Data System (ADS)

    Ilk, K.-H.

    Contents: Die krumme Geodäte (H. Ruder, M. Ruder). Zur Geschichte der Fundamentalstation Wettzell (H. Seeger et al.). Newtons Philosophiae naturalis principia mathematica (M. Schramm). Von Newton zu Einstein (M. H. Soffel). Geodäsie und Physik (S. Heitz). Erdbebenvorhersage mit SEISMOLAP (J. Zschau).

  16. von Willebrand factor in plasma: a novel risk factor for recurrent myocardial infarction and death.

    PubMed Central

    Jansson, J H; Nilsson, T K; Johnson, O

    1991-01-01

    OBJECTIVE--To evaluate as predictors of reinfarction and mortality tissue plasminogen activator antigen and activity before and after venous occlusion, plasminogen activator inhibitor, von Willebrand factor, and established risk factors. DESIGN--Prospective study with a mean observation time of 4.9 years. SETTING--Secondary referral centre, the Department of Internal Medicine, University Hospital of Umeå. PATIENTS--123 consecutive survivors of myocardial infarction under the age of 70 years. MAIN OUTCOME MEASURES--Reinfarction and deaths from all causes. RESULTS--23 patients died and 36 patients had at least one reinfarction. High concentrations of von Willebrand factor were independently associated with both reinfarction and mortality. A history of angina at entry into the study was also independently associated with reinfarction and mortality. Hypertension was independently associated with mortality but not with reinfarction. None of the fibrinolytic or lipid variables was associated with reinfarction or death. CONCLUSION--A high concentration of von Willebrand factor was a novel index of increased risk for reinfarction and mortality in survivors of myocardial infarction. PMID:1747294

  17. Dr. Wernher Von Braun with Dr. Christian Barnard.

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Dr. Christian Barnard Tours Marshall Space Flight Center. Shown in Dr. Von Braun's office are (left to right): Dr. Ernst Sthulinger, a representative from General Electric, Dr. Wernher Von Braun, Dr. Christian Barnard, and Dr. Eberhard Rees.

  18. Geoinformation und Staat

    NASA Astrophysics Data System (ADS)

    Zypries, Brigitte

    2002-09-01

    Geoinformationen besaßen als Grundlage militärischer Interventionen schon immer einen hohen Stellenwert für den Staat. Im Zeitalter der modernen Informations- und Kommunikationstechnologien wächst in demokratischen Staaten die Bedeutung von Geodaten weit über den Verteidigungsbereich hinaus. Brigitte Zypries, Staatssekretärin im Bundesministerium des Innern (BMI) und Vorsitzende des Interministeriellen Ausschusses für Geoinformationswesen (IMAGI), sprach mit Dipl.-Geogr. Ute C. Bauerüber die Anwendung und Koordinierung von Geodaten in Politik und Staat.

  19. von Braun 1952 Space Station Concept

    NASA Technical Reports Server (NTRS)

    1952-01-01

    This is a von Braun 1952 space station concept. In a 1952 series of articles written in Collier's, Dr. Wernher von Braun, then Technical Director of the Army Ordnance Guided Missiles Development Group at Redstone Arsenal, wrote of a large wheel-like space station in a 1,075-mile orbit. This station, made of flexible nylon, would be carried into space by a fully reusable three-stage launch vehicle. Once in space, the station's collapsible nylon body would be inflated much like an automobile tire. The 250-foot-wide wheel would rotate to provide artificial gravity, an important consideration at the time because little was known about the effects of prolonged zero-gravity on humans. Von Braun's wheel was slated for a number of important missions: a way station for space exploration, a meteorological observatory and a navigation aid. This concept was illustrated by artist Chesley Bonestell.

  20. Dr. Wernher Von Braun talkes with George Hardy.

    NASA Technical Reports Server (NTRS)

    1999-01-01

    George Hardy of the Marshall Space Flight center's Astronautics Laboratory, talks with Dr. Wernher Von Braun (right), deputy associate administrator for planning. Dr. Von Braun was inspecting the mockup of the Saturn workshop during a visit to the Marshall Center. The visit coincided with the 10th anniversary celebration of the center of which Dr. Von Braun was director until March 1, 1970.

  1. Chest wall angiolipoma complicating von Recklinghausen disease.

    PubMed

    Komatsu, Teruya; Takahashi, Koji; Fujinaga, Takuji

    2013-09-01

    We present the case of an 18-year-old man with chest wall angiolipoma and a medical history of von Recklinghausen neurofibromatosis. The chest wall tumor was originally detected during an evaluation for chest pain. For diagnostic and therapeutic purposes, video-assisted thoracoscopic resection was performed, and the tumor was histopathologically confirmed to be an angiolipoma. Chest wall angiolipoma is exceptionally rare. Only two cases have been reported in the English literature, with no reports regarding chest wall angiolipoma in a patient with von Recklinghausen disease.

  2. Rotary press utilizing a flexible die wall.

    PubMed

    Amidon, G E; Smith, D P; Hiestand, E N

    1981-06-01

    A die with a flexible wall was constructed and evaluated on a specially modified instrumented rotary tablet press. The design permits an inward deflection of the die wall by a side punch, which rolls past a side compression roll during compression-decompression. The side compression roll is instrumented to monitor the applied side compression roll forces. On decompression, return of the die wall to its original position permits release of residual die wall pressure. The decreased residual die wall pressure can decrease fracture and capping of tablets for problem formulations. The performance was tested on three experimental formulations. For these formulations, tablets made in a conventional die exhibited severe capping problems. However, most tablets compressed in the special die were superior. With proper adjustment of punch and die wall compression forces, excellent tablets could be manufactured. The merits of the special die and modified tablet machine are substantiated, although this initial design did not provide adequate die wall pressure for all formulations. Further engineering efforts could result in practical production equipment.

  3. Evaluation of permanent die coatings to improve the wear resistance of die casting dies. Final project report, January 1, 1995--April 30, 1997

    SciTech Connect

    Shivpuri, R.

    1997-09-18

    Die Casting dies are subject to severe service conditions during the die casting operation. While these severe conditions are necessary to achieve high production rates, they cause the dies which are commonly made of H13 die steel, to suffer frequent failures. The major die failure mechanisms are erosion or washout, Heat checking, soldering and corrosion. Due to their geometrical complexity, die casting dies are very expensive (some dies cost over a million dollars), and thus a large number of parts have to be produced by a die, to justify this cost and leverage the advantages of the die casting process (high production rates, low manpower costs). A potential increase in the die service life, thus has a significant impact on the economics of the die; casting operation. There are many ways to extend die life: developing new wear resistant die materials, developing new surface treatments including coatings, improving heat treatment of existing H13 dies, using better lubricants that can protect the die material, or modifying the die geometry and process parameters to reduce the intensity of wear. Of these the use of coatings to improve the wear resistance of the die surface has shown a lot of promise. Consequently, use of coatings in the die casting industry and their wide use to decrease die wear can improve significantly the productivity of shop operations resulting in large savings in material and energy usage.

  4. Das singuläre Modell der über der Oberfläche von Kryodielektrikas lokalisierten Elektronenzustände

    NASA Astrophysics Data System (ADS)

    Dorofeyev, O. F.; Lysov, B. A.; Pavlova, O. S.; Ternov, I. M.

    Wir schlagen ein neues Modell zur Beschreibung der in der Nähe der Oberfläche von Kryodielektrika lokalisierten Elektronenzustände vor. Dabei wird die Nichteindeutigkeit der selbstadjungierten Erweiterung des Hamilton-Operators der elektrostatischen Bildkräfte an der flachen Grenze Dielektrikum-Vakuum benutzt. Im Unterschied zum bekannten Modell von Grimes enthält das von uns vorgeschlagene Modell nur einen einzigen phänomenologischen Parameter, den Vermischungswinkel. Es zeigt sich, daß die entsprechende Wahl des Vermischungswinkels es erlaubt, die spektroskopischen Daten von elektrischen Dipolübergängen zwischen den Einteilchen-Elektronenzuständen, die über der Oberfläche flüssigen 4He und 3He sowie festen Wasserstoffe lokalisiert sind, vollständig zu beschreiben.Translated AbstractA Singular Model of Electronic States, Localized over the Surface of Cryogenized DielectricA new model for the description of localized electronic states near the surface of a cryogenized dielectric is proposed. In this model an ambiguity of the self-adjoined extention of the Hamiltonian for the problem of the motion of an electron in the field of the electrostatic image at flat boundary dielectric-vacuum is used. The proposed model, in contrast with the well known model of Grimes, contains as only phenomenological parameter the mixing angle. It is shown that the proper choise of the mixing angle makes it possible to completely account for the spectroscopic data on electric dipole transitions between singleparticle electronic states localized over the surfaces of 4He, 3He and also solid hydrogen.

  5. Vacuum die attach for integrated circuits

    DOEpatents

    Schmitt, E.H.; Tuckerman, D.B.

    1991-09-10

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

  6. Die singulation method and package formed thereby

    SciTech Connect

    Anderson, Robert C.; Shul, Randy J.; Clews, Peggy J.; Baker, Michael S.; De Boer, Maarten P.

    2012-08-07

    A method is disclosed for singulating die from a substrate having a sacrificial layer and one or more device layers, with a retainer being formed in the device layer(s) and anchored to the substrate. Deep Reactive Ion Etching (DRIE) etching of a trench through the substrate from the bottom side defines a shape for each die. A handle wafer is then attached to the bottom side of the substrate, and the sacrificial layer is etched to singulate the die and to form a frame from the retainer and the substrate. The frame and handle wafer, which retain the singulated die in place, can be attached together with a clamp or a clip and to form a package for the singulated die. One or more stops can be formed from the device layer(s) to limit a sliding motion of the singulated die.

  7. Vacuum die attach for integrated circuits

    DOEpatents

    Schmitt, Edward H.; Tuckerman, David B.

    1991-01-01

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required.

  8. Should assisted dying be legalised?

    PubMed Central

    2014-01-01

    When an individual facing intractable pain is given an estimate of a few months to live, does hastening death become a viable and legitimate alternative for willing patients? Has the time come for physicians to do away with the traditional notion of healthcare as maintaining or improving physical and mental health, and instead accept their own limitations by facilitating death when requested? The Universities of Oxford and Cambridge held the 2013 Varsity Medical Debate on the motion “This House Would Legalise Assisted Dying”. This article summarises the key arguments developed over the course of the debate. We will explore how assisted dying can affect both the patient and doctor; the nature of consent and limits of autonomy; the effects on society; the viability of a proposed model; and, perhaps most importantly, the potential need for the practice within our current medico-legal framework. PMID:24423249

  9. Alexander von Humboldt: a revolutionary explorer.

    PubMed

    Fara, Patricia

    2008-03-01

    After he returned from his five-year expedition to the New World, Alexander von Humboldt promoted himself as a Romantic explorer. Although this image pervades British perceptions, political movements have fashioned different heroic versions of Humboldt in Germany and South America.

  10. Dr. von Braun Visits Huntsville Boys Club

    NASA Technical Reports Server (NTRS)

    1961-01-01

    Dr. von Braun, Director of Marshall Space Flight Center (MSFC) and chairman of this year's United Givers Fund (UGF) drive at MSFC, takes time out from the problems of sending a man to the Moon to talk baseball with 11-year-old Randy Smith at the Huntsville Boys Club.

  11. Dr. Wernher Von Braun presents a certificate

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Dr. Wernher Von Braun (left), director of the Marshall Space Flight Center, presents a humorous certificate to Major General Charles W. Eifler, commanding general of Redstone Arsenal, at the close of a farewell luncheon for the general prior to General Eifler moving to a new European duty station.

  12. Dr. von Braun Discusses 'Bottle Suit' Concept

    NASA Technical Reports Server (NTRS)

    1954-01-01

    Dr. Wernher von Braun (center), then Chief of the Guided Missile Development Division at Redstone Arsenal, Alabama, discusses a 'bottle suit' model with Dr. Heinz Haber (left), an expert on aviation medicine, and Willey Ley, a science writer on rocketry and space exploration. The three men were at the Disney studios appearing in the motion picture, entitled 'Man in Space.'

  13. Von Gierke's disease: report of case.

    PubMed

    Cudzinowski, L

    1979-01-01

    Von Gierke's disease, or hepatorenal glycogenesis, type I, presents an interesting challenge to the dental practitioner. Showing an incidence of 1/400,000, it is a fairly rare occurrence. It indicates the importance of proper medical consultation in treating these children, and proper dental treatment and preventive programs to alleviate what could be dangerous for these patients. PMID:289662

  14. A note on derivations of Murray–von Neumann algebras

    PubMed Central

    Kadison, Richard V.; Liu, Zhe

    2014-01-01

    A Murray–von Neumann algebra is the algebra of operators affiliated with a finite von Neumann algebra. In this article, we first present a brief introduction to the theory of derivations of operator algebras from both the physical and mathematical points of view. We then describe our recent work on derivations of Murray–von Neumann algebras. We show that the “extended derivations” of a Murray–von Neumann algebra, those that map the associated finite von Neumann algebra into itself, are inner. In particular, we prove that the only derivation that maps a Murray–von Neumann algebra associated with a factor of type II1 into that factor is 0. Those results are extensions of Singer’s seminal result answering a question of Kaplansky, as applied to von Neumann algebras: The algebra may be noncommutative and may even contain unbounded elements. PMID:24469831

  15. Patentierung und Patentlage

    NASA Astrophysics Data System (ADS)

    Herrmann, Uwe

    Gewerbliche Schutzrechte nehmen in der nationalen Rechts- und Wirtschaftsordnung sowie auch auf internationaler Ebene stetig an Bedeutung zu. Sie dienen dem Schutz geistigen Eigentums und sind für jeden Gewerbetreibenden nicht nur im Hinblick darauf von Bedeutung, eigene Rechte zu sichern, sondern auch insofern von Relevanz, dass ein Verstoß gegen Rechte Dritter zu vermeiden ist. Zu den gewerblichen Schutzrechten gehören unter anderem Kennzeichenrechte, Geschmacksmusterrechte sowie die sogenannten technischen Schutzrechte in Form des Patents sowie des Gebrauchsmusters. Die folgenden Ausführungen befassen sich ausschließlich mit den technischen Schutzrechten und geben eine kurze Einführung in die Voraussetzungen, das Entstehen und den Wegfall sowie in die Wirkungen technischer Schutzrechte. Beleuchtet wird die Situation im Wesentlichen im Hinblick auf nationale technische Schutzrechte, d. h. auf Deutsche Patente und Gebrauchsmuster sowie auf Europäische Patente, die Schutz in Deutschland entfalten. Die Möglichkeit der Erlangung von Schutzrechten im außereuropäischen Ausland wird nur am Rande gestreift.

  16. Student Nurses' Perception of Death and Dying

    ERIC Educational Resources Information Center

    Niederriter, Joan E.

    2009-01-01

    Student nurses are involved in caring for patients who are actively dying or who have been told they have a terminal illness and are faced with the process of dying. Students encounter these patients in hospitals, nursing homes, at home or in hospice care settings. According to Robinson (2004), "nurses are the healthcare providers that are most…

  17. Energy Consumption of Die Casting Operations

    SciTech Connect

    Jerald Brevick; clark Mount-Campbell; Carroll Mobley

    2004-03-15

    Molten metal processing is inherently energy intensive and roughly 25% of the cost of die-cast products can be traced to some form of energy consumption [1]. The obvious major energy requirements are for melting and holding molten alloy in preparation for casting. The proper selection and maintenance of melting and holding equipment are clearly important factors in minimizing energy consumption in die-casting operations [2]. In addition to energy consumption, furnace selection also influences metal loss due to oxidation, metal quality, and maintenance requirements. Other important factors influencing energy consumption in a die-casting facility include geographic location, alloy(s) cast, starting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting form of alloy (solid or liquid), overall process flow, casting yield, scrap rate, cycle times, number of shifts per day, days of operation per month, type and size of die-casting machine, related equipment (robots, trim presses), and downstream processing (machining, plating, assembly, etc.). Each of these factors also may influence the casting quality and productivity of a die-casting enterprise. In a die-casting enterprise, decisions regarding these issues are made frequently and are based on a large number of factors. Therefore, it is not surprising that energy consumption can vary significantly from one die-casting enterprise to the next, and within a single enterprise as function of time.

  18. Apparatus for restraining and transporting dies

    DOEpatents

    Allison, James W.; LaBarre, Timothy L.

    1994-01-01

    Apparatus for restraining and transporting dies in punch press operations is provided. A floatation platen for supporting a die on the platen's upper surface has a plurality of recessed gas exhaust ports on the platen's lower surface. A source of pressurized gas delivers gas to a platen manifold, for delivery to orifices located in the gas exhaust ports. The flow of gas is controlled by a first valve adjacent the gas source and a second valve adjacent the manifold, with the second valve being used to control the gas flow during movement of the die. In this fashion, a die may be moved on a cushion of air from one workstation to a selected second workstation. A moveable hydraulically operated restraining fixture is also provided, for clamping the die in position during the compacting phase, and for releasing the die after completion of the compacting phase by releasing the hydraulic pressure on the restraining fixture. When pressure in the hydraulic cylinders on the restraining fixture is reversed, the restraining fixture will retract so that there is no contact between the die and the restraining fixture, thereby allowing the die to be removed from a first workstation and moved to a second selected workstation.

  19. Prediction of Part Distortion in Die Casting

    SciTech Connect

    R. Allen Miller

    2005-03-30

    The die casting process is one of the net shape manufacturing techniques and is widely used to produce high production castings with tight tolerances for many industries. An understanding of the stress distribution and the deformation pattern of parts produced by die casting will result in less deviation from the part design specification, a better die design and eventually more productivity and cost savings. This report presents methods that can be used to simulate the die casting process in order to predict the deformation and stresses in the produced part and assesses the degree to which distortion modeling is practical for die casting at the current time. A coupled thermal-mechanical finite elements model was used to simulate the die casting process. The simulation models the effect of thermal and mechanical interaction between the casting and the die. It also includes the temperature dependant material properties of the casting. Based on a designed experiment, a sensitivity analysis was conducted on the model to investigate the effect of key factors. These factors include the casting material model, material properties and thermal interaction between casting and dies. To verify the casting distortion predictions, it was compared against the measured dimensions of produced parts. The comparison included dimensions along and across the parting plane and the flatness of one surface.

  20. Assisted dying: a review of international legislation.

    PubMed

    Field, Charlotte; Curtice, Martin

    2009-05-01

    The issue of assisted dying in the UK is increasingly receiving media and academic journal attention. Such reporting often cites, but in little depth, existing legislation in other countries. Such international legislation may also shape future UK assisted dying legislation. PMID:19451872

  1. The Right To Die. Public Talk Series.

    ERIC Educational Resources Information Center

    Pasquerella, Lynn

    This program guide on the right to die provides policy issue information where ethical concerns have a prominent place. Three positions about the right to die are presented: (1) mercy killing and assisted suicide should be legally permitted in certain cases; (2) legal status should be given to living wills and other advance directives that would…

  2. Goethe almost died of urosepsis.

    PubMed

    Gross, A J; Hummel, G

    1999-12-01

    In the year of 1805, Goethe almost died of urosepsis. His urological problems were not diseases arising from full health but a new variation in a life accompanied by illnesses. Some sources date the first colics he experienced to the year 1795 and others say 1805. The most dramatic period in the course of his illness was in February, when he suffered from fever of such an extent that one could speak of urosepsis. Recovery took place slowly and was accompanied by minor relapses. Nothing about this is written down in his work. On the advice of his doctors, Goethe undertook a cure in Lauchstädt in July and August. The report of his consultant, Professor Johann Christian Reil, on his problems in the field of urology remained undiscovered until 1937. Professor Reil recommended treatment with thermae carolinae, aqua calcis, soap soda crystallisata, herbae subastringentes, and uva ursi, among other measures. With increasing age, Goethe's colics disappeared. The passing of a stone has never been described. Whereas Goethe hinted about medical problem other than those reported herein, the urological problems discussed in this article were left unmentioned. Nonetheless, literature that deals with Goethe's diseases is interesting from the aspect of both the history of medicine and the history of culture.

  3. Dying to go to school.

    PubMed

    Shearar, A

    1997-01-01

    In southern Sudan, the recent war sparked a mass migration of boys aged 5-18 who traveled through perilous terrain to the borders of Ethiopia in search of promised security and schooling. Thousands of these children died from hardships suffered in the wild, from the inadvertent or deliberate attacks of warriors, from hunger, from thirst, or from disease. Those who endured the hardships and arrived at their destination were shocked to find only military training centers or rudimentary schooling for those who were too weak or too young to be trained for battle. Eventually, the refugees were forced back into Sudan, and today about 20,000 of these unaccompanied children are displaced. Several nongovernmental organizations are running family reunification projects, and follow-up activities carried out among the reunified children reveal that they carry the scars of their trauma. The drawings the children produce as art therapy usually include the image of a young child holding a school book. While these children have a constant struggle with their memories, those who have not returned home or who have lost their families to war or disease are even more forlorn. As food rations have been halved in the refugee camps, many children are pursuing any possible alternative living arrangement. Some attempt to travel to South Africa or Egypt and some join an army in an effort to overcome the desperation of their present situation. PMID:12294200

  4. From the classical to the generalized von Karman and Marguerre-von Karman equations

    NASA Astrophysics Data System (ADS)

    Ciarlet, Philippe G.; Gratie, Liliana

    2006-06-01

    In this work, we describe and analyze two models that were recently proposed for modeling generalized von Karman plates and generalized Marguerre-von Karman shallow shells.First, we briefly review the "classical" von Karman and Marguerre-von Karman equations, their physical meaning, and their mathematical justification. We then consider the more general situation where only a portion of the lateral face of a nonlinearly elastic plate or shallow shell is subjected to boundary conditions of von Karman type, while the remaining portion is free. Using techniques from formal asymptotic analysis, we obtain in each case a two-dimensional boundary value problem that is analogous to, but is more general than, the classical equations.In particular, it is remarkable that the boundary conditions for the Airy function can still be determined on the entire boundary of the nonlinearly elastic plate or shallow shell solely from the data.Following recent joint works, we then reduce these more general equations to a single "cubic" operator equation, which generalizes an equation introduced by Berger and Fife, and whose sole unknown is the vertical displacement of the shell. We next adapt an elegant compactness method due to Lions for establishing the existence of a solution to this operator equation.

  5. Inattentional blindness and the von Restorff effect.

    PubMed

    Schmidt, Stephen R; Schmidt, Constance R

    2015-02-01

    Sometimes we fail to notice distinctive or unusual items (inattentional blindness), while other times we remember distinctive items more than expected items (the von Restorff effect). A three-factor framework is presented and tested in two experiments in an attempt to reconcile these seemingly contradictory phenomena. Memory for different types of unexpected stimuli was tested after an easy or difficult Stroop color-naming task. Highly arousing taboo words were well remembered even when the difficult Stroop task limited attentional resources. However, a conceptual isolation effect was only observed when the nature of the category change was highlighted by the Stroop task, the Stroop task was easy, and/or the isolated targets enjoyed a retrieval advantage relative to comparison targets. As proposed in the three-factor framework, the arousing qualities of the stimuli, the attentional demands of the primary task, and the relevance of isolated features at encoding and retrieval combine to produce inattentional blindness and the von Restorff effect.

  6. Epithelial cells and Von Gierke's disease.

    PubMed

    Negishi, H; Benke, P J

    1977-08-01

    Epithelial cells and not fibroblasts from human liver and amniotic fluid contain inducible glucose-6-phosphatase (G-6-Pase) activity. The diagnosis of Von Gierke's disease has been made in a patient with hepatomegaly utilizing cultured epithelial cells grown from a liver biopsy. G-6-Pase activity in epithelial cells from this patient could not be induced by dibutyryl cyclic AMP and theophylline. This is the first use of epithelial cells for diagnosis of a metabolic disease. G-6-Pase activity in cloned epithelial cells from amniotic fluid increases 2- to 3-fold after 24-hr exposure to dibutyryl cyclic AMP and theophylline. The prenatal diagnosis of Von Gierke's disease may be possible in a laboratory experienced with these techniques if epithelial cell growth is obtained from amniotic fluid. PMID:196249

  7. The von Nardroff Color Mixing Apparatus

    NASA Astrophysics Data System (ADS)

    Greenslade, Thomas B.

    2005-12-01

    Ernest von Nardroff gave his name to the color mixing apparatus shown in Fig. 1. The basic idea behind this demonstration is to produce three beams of colored light that may be projected onto a white surface. If beams of red, blue, and green are overlapped to produce a figure like a three leaf clover or a Venn diagram, the region of complete overlap will appear white, and the three regions of overlap of two colors produce the three false primaries: yellow, magenta, and cyan. A straightforward technique is to use three slide projectors, each with a colored filter. Von Nardroff's apparatus, displayed at the educational exhibit of Erasmus Hall High School at the Louisiana Purchase Exposition in St. Louis in 1904, permits the use of only one projector.

  8. Neue biosensorische Prinzipien für die Hämoglobin-A1c Bestimmung

    NASA Astrophysics Data System (ADS)

    Stöllner, Daniela

    2002-06-01

    Hämoglobin-A1c (HbA1c) ist ein Hämoglobin (Hb)-Subtypus, der durch nicht-enzymatische Glykierung des N-terminalen Valinrestes der Hämoglobin-beta-Kette entsteht. Das gemessene Verhältnis von HbA1c zum Gesamt-Hämoglobin (5-20 % bei Diabetikern) repräsentiert den Mittelwert der Blutglucosekonzentration über einen zweimonatigen Zeitraum und stellt zur Beurteilung der diabetischen Stoffwechsellage eine Ergänzung zur Akutkontrolle der Glukosekonzentration dar. Ziel der vorliegenden Arbeit war es, einen amperometrischen Biosensor für die Bestimmung des medizinisch relevanten Parameters HbA1c zu entwickeln. Durch Selektion geeigneter Bioerkennungselemente und deren Immobilisierung unter Erhalt der Bindungsfunktion für die Zielmoleküle Hämoglobin bzw. HbA1c wurden spezifische, hochaffine und regenerationsstabile Sensoroberflächen geschaffen. Für die Entwicklung des HbA1c-Biosensors wurden zwei Konzepte - Enzymsensor und Immunosensor - miteinander verglichen. Die enzymatische Umsetzung von HbA1c erfolgte mit der Fructosylamin Oxidase (FAO) aus Pichia pastoris N 1-1 unter Freisetzung von H2O2, welches sowohl optisch über eine Indikatorreaktion als auch elektrochemisch nach Einschluss der FAO in PVA-SbQ und Fixierung des Immobilisats vor einer H2O2-Elektrode nachgewiesen wurde. Die Kalibration des Enzymsensors mit der HbA1c-Modellsubstanz Fructosyl-Valin ergab Nachweisgrenzen, die ausserhalb des physiologisch relevanten HbA1c-Konzentrationsbereich lagen. Aus der Umsetzung von glykierten Peptiden mit einer nicht HbA1c analogen Aminosäurensequenz, z.B. Fructosyl-Valin-Glycin wurde zudem eine geringe HbA1c-Spezifität abgeleitet. Für den Immunosensor wurden zwei heterogene Immunoassay-Formate unter Verwendung von hochaffinen und spezifischen Antikörpern in Kombination mit Glucose Oxidase (GOD) als Markerenzym zum Nachweis von HbA1c untersucht. Beim indirekt-kompetitiven Immunoassay wurde anstelle des kompletten HbA1c-Moleküls das glykierte Pentapeptid

  9. BOOK REVIEW: Meilensteine der Astronomie - Von Aristoteles bis Hawking

    NASA Astrophysics Data System (ADS)

    Duerbeck, H. W.; Hamel, J.

    2006-12-01

    neglected, other astronomers? Before the chapter dealing with Aristoteles and other Greek thinkers, the author presents a very good introduction to prehistoric astronomy. Subsequent chapters cover medieval times (Sacrobosco), Copernicus, instruments (Apian), calendars and their makers, telescopes and theological conflicts, women in astronomy and celestial mechanics, "amateur" astronomers (Herschel and Bessel), philosophy and science (Kant and successors). "At the limits of knowledge" is the title of the last, somewhat scanty chapter on 20th century astronomy. The only confusing text is found on p. 43: Die exzentrische Lage der Spharen wurde von Hipparch im 2. Jahrhundert v. Chr. eingefuhrt. Cum grano salis, this is correct; Hipparchos assumed an eccentric orbit for the Sun. Furthermore, die Erde steht im Mittelpunkt des Deferenten, jedoch um den Betrag der Exzentrizitat E vom Mittelpunkt des Exzenters entfernt. A figure showing a deferent circle (and attached epicycle) with center M, and a lower point E called center of world = center of Earth in the caption, tries to illustrate this. The desperate reader does not find the eccenter in the figure, and also does not appreciate why the Earth is in the center of the deferent M when the caption says it is in E. The explanation is that for a planet, having two anomalies, the epicycle does not run on a concentric circle, usually called deferent, but on an eccenter. Thus, in the figure, the circle labelled deferent is the eccenter. In Cellarius' Harmonia Macrocosmica, Table 14, a similar figure explains it all: Eccentricus deferens epicyclum - the eccenter that carries around the epicycle. Since we have switched to Latin, we should mention that on p. 158, we encountered the sentence "in dubia pro res". Perhaps we are permitted to reply "si tacuisses, philosophus mansisses". The reader is cautioned: if this book is used as a road atlas for the history of astronomy, the reader will often find very rough sketches of the progress of

  10. Portrait of Dr. Von Braun with Walt Disney, 1954.

    NASA Technical Reports Server (NTRS)

    1954-01-01

    Marshall Center Director Dr. Wernher Von Braun is pictured with Walt Disney during a visit to the Marshall Space Flight Center in 1954. In the 1950s, Dr. Von Braun while working in California on the Saturn project, also worked with Disney studios as a technical director in making three films about Space Exploration for television. Disney's tour of Marshall in 1965 was Von Braun's hope for a renewed public interest in the future of the Space Program at NASA.

  11. Implementation of "social and communicative competencies" in medical education. The importance of curriculum, organisational and human resource development.

    PubMed

    Pruskil, Susanne; Deis, Nicole; Druener, Susanne; Kiessling, Claudia; Philipp, Swetlana; Rockenbauch, Katrin

    2015-01-01

    Zielsetzung: Ziel dieser Arbeit ist es, Lehrenden und Curriculumsplanern die Bedeutung der Curriculums- (CE), Personal- (PE) und Organisationsentwicklung (OE), bereits in der Planungsphase eines Projekts aufzuzeigen. Diese können dann gezielt genutzt werden um Veränderungsprozesse bei der Einführung und Etablierung von Curricula im Bereich kommunikativer und sozialer Kompetenzen im Medizinstudium erfolgreich zu beeinflussen und zu steuern.Vorgehen und Ergebnisse: Im Rahmen eines mehrstufigen Entwicklungsprozesses, in dem insbesondere zwei interfakultäre Workshops des GMA-Ausschusses „Kommunikative und soziale Kompetenzen“ im Zentrum standen, wurde aufbauend auf die verfügbare Literatur und den Erfahrungen von Kommunikationsexperten eine Empfehlung zur CE im Bereich „Kommunikativer und sozialer Kompetenzen“ erarbeitet. Die „Undeloher-Empfehlung“ (siehe Anhang ) beinhaltet eine Zusammenstellung von Empfehlungen und Leitfragen, die sich an den verschiedenen Phasen der CE orientiert. Zusätzlich wurden allgemeine Herangehensweisen und Empfehlungen der Organisations- und Personalorganisation integriert, die sich im Prozess der CE als besonders relevant herausstellten. Damit beinhaltet die „Undeloher-Empfehlung“ für jede einzelne Phase der Curriculumsentwicklung eine Orientierung, was in bezug auf das Curriculum, die Organisation und das Personal für eine erfolgreiche Implementierung von longitudinalen Curricula zu beachten ist. Neben theoretischen Modellen fließen insbesondere der langjährige Diskussionsprozess und die persönlichen Erfahrungen einer Vielzahl von Curriculumsplanern und Lehrenden ein. Fazit: Die „Undeloher-Empfehlung“ kann die Vorbereitung und Begleitung von Implementierungsprozessen von Curricula im Bereich kommunikative und soziale Kompetenzen unterstützen. Ihre Anwendung wurde im Rahmen der Workshops auf konkrete Beispiele überprüft und wurde von den beteiligten Lehrenden und Curriculumsplanern als sehr hilfreich

  12. Die Evolution des Universums. Eine Geschichte der Kosmologie.

    NASA Astrophysics Data System (ADS)

    Hiller, H.

    This volume covers in an elementary course a historical overview on cosmology ranging from the ancient aspects up to big bang theory and the concepts of inflationary universe and grand unified theories. Contents: 1. Auf dem Wege zur Wissenschaft. 2. Die neue Kosmologie. 3. Die Struktur des Weltalls. 4. Dramatik im Weltall. 5. Die endliche Welt. 6. Die Evolution des frühen Universums. 7. Die Zukunft. 8. Die neue Teleologie. 9. Das Leben.

  13. CEU your jewish patient is dying....

    PubMed

    Schwartz, E A

    1989-01-01

    This article offers the nurse information needed for planning the care of Jewish patients and their families during the dying and mourning process - whether that patient is Orthodox, Conservative, or Reform.

  14. Casting Characteristics of Aluminum Die Casting Alloys

    SciTech Connect

    Makhlouf M. Makhlouf; Diran Apelian

    2002-02-05

    The research program investigates the casting characteristics of selected aluminum die casting alloys. Specifically, the alloys' tendencies towards die soldering and sludge formation, and the alloys' fluidity and machinability are evaluated. It was found that: When the Fe and Mn contents of the alloy are low; caution has to be taken against possible die soldering. When the alloy has a high sludge factor, particularly a high level of Fe, measures must be taken to prevent the formation of large hardspots. For this kind of alloy, the Fe content should be kept at its lowest allowable level and the Mn content should be at its highest possible level. If there are problems in die filling, measures other than changing the alloy chemistry need to be considered first. In terms of alloy chemistry, the elements that form high temperature compounds must be kept at their lowest allowable levels. The alloys should not have machining problems when appropriate machining techniques and machining parameters are used.

  15. Supporting dignified dying in the Philippines

    PubMed Central

    Doorenbos, Ardith Z; Abaquin, Carmencita; Perrin, Margot E; Eaton, Linda; Balabagno, Araceli O; Rue, Tessa; Ramos, Rita

    2011-01-01

    Purpose This study aimed to assess the appropriateness of the International Classification for Nursing Practice (ICNP) Palliative Care for Dignified Dying catalogue for palliative nursing in the Philippines. Methods The study recruited 230 nurses to complete the ICNP Dignified Dying survey. Participants rated ICNP nursing intervention items and identified additional interventions for promoting dignified dying. Results All of the intervention items were scored on average as being at least ‘slightly important’. The three top-ranked nursing intervention categories were providing social support, maintaining privacy boundaries, and relieving psychological distress. Conclusions The ICNP Palliative Care for Dignified Dying catalogue lists nursing interventions that are appropriate to promoting dignity at the end of life in the Philippines. PMID:21471908

  16. Is there a moral duty to die?

    PubMed

    Corlett, J A

    2001-01-01

    In recent years, there has been a great deal of philosophical discussion about the alleged moral right to die. If there is such a moral right, then it would seem to imply a moral duty of others to not interfere with the exercise of the right. And this might have important implications for public policy insofar as public policy ought to track what is morally right. But is there a moral duty to die? If so, under what conditions, if any, ought one to have such a duty, and why? In this paper, I distinguish between different moral grounds for the putative moral duty to die: deontological, intuitionist, and contractarian. Subsequently, I argue in support of Paul Menzel's theory of health care distribution. More precisely, I concur with his claim that there is a moral duty to die inexpensively in health care contexts. Then I provide and defend a philosophical analysis of the conditions in which such a duty could exist.

  17. Understanding Dying Patients and Their Families

    PubMed Central

    Librach, S.L.; Talbot, Yves

    1991-01-01

    Caring for dying patients and their families presents unique opportunities and challenges for the family physician. The family FIRO model provides a simple way of assessing families and providing appropriate, individualized care. This article outlines the model, discusses the care of dying patients and their families from the FIRO perspective, and provides a guideline for the family physician. A framework is suggested for teaching residents to support families. PMID:21228989

  18. Machining of Silicon-Ribbon-Forming Dies

    NASA Technical Reports Server (NTRS)

    Menna, A. A.

    1985-01-01

    Carbon extension for dies used in forming silicon ribbon crystals machined precisely with help of special tool. Die extension has edges beveled toward narrow flats at top, with slot precisely oriented and centered between flats and bevels. Cutting tool assembled from standard angle cutter and circular saw or saws. Angle cutters cuts bevels while slot saw cuts slot between them. In alternative version, custom-ground edges or additional circular saws also cut flats simultaneously.

  19. Thick film silicon growth techniques. [die materials

    NASA Technical Reports Server (NTRS)

    Bates, H. E.; Mlavsky, A. I.; Jewett, D. N.; White, V. E.

    1973-01-01

    The research which was directed toward finding an improved die material is reported. Wetting experiments were conducted with various materials to determine their compatibility with silicon. Work has also continued toward the development of quartz as a die material as new techniques have provided more optimistic results than observed in the past. As a result of the thermal modification previously described, improvements in growth stability have contributed to an increase in ribbon quality.

  20. Manufacture of die casting dies by hot isostatic pressing. CRADA final report

    SciTech Connect

    Viswanathan, S.; Ren, W.; Luk, K.; Brucher, H.G.

    1998-09-01

    The reason for this Cooperative Research and Development Agreement (CRADA) between the Oak Ridge National Laboratory (ORNL) and Doehler-Jarvis was to investigate the manufacture die-casting dies with internal water-cooling lines by hot-isostatic pressing (HIPing) of H13 tool steel powder. The use of HIPing will allow the near-net-shape manufacture of dies and the strategic placement of water-cooling lines during manufacture. The production of near-net-shape dies by HIPing involves the generation of HIPing diagrams, the design of the can that can be used for HIPing a die with complex details, strategic placement of water-cooling lines in the die, computer modeling to predict movement of the water lines during HIPing, and the development of strategies for placing water lines in the appropriate locations. The results presented include a literature review, particle analysis and characterization of H13 tool steel powder, and modeling of the HIPing process.

  1. IQM-Reifegradmodell für die Bewertung und Verbesserung des Information Lifecycle Management Prozesses

    NASA Astrophysics Data System (ADS)

    Baškarada, Saša; Gebauer, Marcus; Koronios, Andy; Gao, Jing

    Heutige Organisationen produzieren und speichern mehr Informationen als je zuvor. Der resultierende Informationsüberfluss, zusammen mit einem Mangel an Qualitätssicherung für das Information Lifecycle Management, führt zu einem unsicheren Status der Informationsqualität in vielen Organisationen. Weiterhin hat sich herausgestellt, dass das Bewerten, Verbessern und Steuern der Informationsqualität ein offenkundig schwieriges Unterfangen ist. Dieses Kapitel stellt ein Modell zur Bewertung und Verbesserung der Information Quality Management Capability Maturity (IQM-Reifegrad) vor. Es wird ein Satz von Kriterien vorgestellt, der aus Literaturrecherche und Fallstudien abgeleitet wurde. Die Reifegradindikatoren werden validiert und in einem mehrstufigen Reifegradmodell durch eine Delphi-Studie gruppiert. Das abgeleitete IQM-Reifegradmodell hilft Organisationen ihre bestehenden Praktiken im IQM zu bewerten und potentielle Lücken und Verbesserungsstrategien zu ermitteln.

  2. Celestial Fireworks from Dying Stars

    NASA Astrophysics Data System (ADS)

    2011-04-01

    This image of the nebula NGC 3582, which was captured by the Wide Field Imager on the MPG/ESO 2.2-metre telescope at ESO's La Silla Observatory in Chile, shows giant loops of gas bearing a striking resemblance to solar prominences. These loops are thought to have been ejected by dying stars, but new stars are also being born within this stellar nursery. These energetic youngsters emit intense ultraviolet radiation that makes the gas in the nebula glow, producing the fiery display shown here. NGC 3582 is part of a large star-forming region in the Milky Way, called RCW 57. It lies close to the central plane of the Milky Way in the southern constellation of Carina (The Keel of Jason's ship, the Argo). John Herschel first saw this complex region of glowing gas and dark dust clouds in 1834, during his stay in South Africa. Some of the stars forming in regions like NGC 3582 are much heavier than the Sun. These monster stars emit energy at prodigious rates and have very short lives that end in explosions as supernovae. The material ejected from these dramatic events creates bubbles in the surrounding gas and dust. This is the probable cause of the loops visible in this picture. This image was taken through multiple filters. From the Wide Field Imager, data taken through a red filter are shown in green and red, and data taken through a filter that isolates the red glow characteristic of hydrogen are also shown in red. Additional infrared data from the Digitized Sky Survey are shown in blue. The image was processed by ESO using the observational data identified by Joe DePasquale, from the United States [1], who participated in ESO's Hidden Treasures 2010 astrophotography competition [2]. The competition was organised by ESO in October-November 2010, for everyone who enjoys making beautiful images of the night sky using astronomical data obtained using professional telescopes. Notes [1] Joe searched through ESO's archive and identified datasets that he used to compose his

  3. A comparison of the accuracy of three removable die systems and two die materials.

    PubMed

    Sivakumar, I; Mohan, J; Arunachalam, K S; Zankari, V

    2013-09-01

    The purpose of this study was to evaluate the dimensional shift of three commonly used die systems (Conventional system, Pindex system, Di-Lok tray system) with two commercially available type IV die stones (Ultra rock and Pearl stone). Under controlled conditions, ten casts, each with two removable dies, were constructed for each system for a total of 30 casts and 60 removable dies. Before and after sectioning measurements to within 0.01 mm in horizontal and vertical planes were recorded and differences calculated. Data were analyzed with 't' tests, one way analysis of variance and post hoc Tukey test. The results demonstrated that among the die systems compared, no single system was superior to the others in all respects. But among the die materials, dies poured in Pearl stone exhibited more dimensional changes than Ultra rock (p<0.05). Selection of die material is as critical as selection of any particular die system for successful fabrication of fixed partial denture and implant prosthesis.

  4. Victor or Villain? Wernher von Braun and the Space Race

    ERIC Educational Resources Information Center

    O'Brien, Jason L.; Sears, Christine E.

    2011-01-01

    Set during the Cold War and space race, this historical role-play focuses on Wernher von Braun's involvement in and culpability for the use of slave laborers to produce V-2 rockets for Nazi Germany. Students will grapple with two central questions. Should von Braun have been allowed to emigrate to the United States given his affiliation with the…

  5. Group Theoretical Interpretation of von Neumann's Theorem on Composite Systems.

    ERIC Educational Resources Information Center

    Bergia, S.; And Others

    1979-01-01

    Shows that von Neumann's mathematical theorem on composite systems acquires a transparent physical meaning with reference to a suitable physical example; a composite system in a state of definite angular momentum. Gives an outline of the theorem, and the results are restated in Dirac's notation, thus generalizing von Neumann's results which were…

  6. DEBUS, KURT H. AND WERNHER VON BRAUN IN SATURN BLOCKHOUSE

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Cape Kennedy - Dr. Wernher von Braun, director of the National Aeronautics and Space Administration's Marshall Space Flight Center, points to a television screen in the Saturn blockhouse. The screen showed Saturn I vehicle, carrying Pegasus satellite into orbit, during launch. Dr. Kurt Debus, director of NASA's Kennedy Space Center, is seated at Dr. von Braun's right.

  7. Key contributors: Ernst von Glasersfeld's radical constructivism

    NASA Astrophysics Data System (ADS)

    Tobin, Kenneth

    2007-07-01

    This article reviews the significance of the contributions of Ernst von Glasersfeld to research in science education, especially through his theoretical contributions on radical constructivism. As a field shaper, Glasersfeld's subversive ideas catalyzed debate in the science education community and fuelled transformation of many facets including research methods, ways of thinking about teaching and learning, curriculum, and science teacher education. Perturbations emanating from the debates on constructivism forged new pathways that led to the development and use of many of the sociocultural frameworks employed by authors in Cultural Studies of Science Education.

  8. Approximating incompatible von Neumann measurements simultaneously

    SciTech Connect

    Heinosaari, Teiko; Jivulescu, Maria Anastasia; Reitzner, Daniel; Ziman, Mario

    2010-09-15

    We study the problem of performing orthogonal qubit measurements simultaneously. Since these measurements are incompatible, one has to accept additional imprecision. An optimal joint measurement is the one with the least possible imprecision. All earlier considerations of this problem have concerned only joint measurability of observables, while in this work we also take into account conditional state transformations (i.e., instruments). We characterize the optimal joint instrument for two orthogonal von Neumann instruments as being the Lueders instrument of the optimal joint observable.

  9. Wernher von Braun and Saturn IB on Launch Pad

    NASA Technical Reports Server (NTRS)

    1968-01-01

    Dr. Wernher von Braun stands in front of a Saturn IB launch vehicle at Kennedy Space Flight Center. Dr. von Braun led a team of German rocket scientists, called the Rocket Team, to the United States, first to Fort Bliss/White Sands, later being transferred to the Army Ballistic Missile Agency at Redstone Arsenal in Huntsville, Alabama. They were further transferred to the newly established NASA/Marshall Space Flight Center (MSFC) in Huntsville, Alabama in 1960, and Dr. von Braun became the first Center Director. Under von Braun's direction, MSFC developed the Mercury-Redstone, which put the first American in space; and later the Saturn rockets, Saturn I, Saturn IB, and Saturn V. The Saturn V launch vehicle put the first human on the surface of the Moon, and a modified Saturn V vehicle placed Skylab, the first United States' experimental space station, into Earth orbit. Dr. von Braun was MSFC Director from July 1960 to February 1970.

  10. Exploring the case for assisted dying in the UK.

    PubMed

    Haigh, Carol

    This article discusses the concepts of euthanasia, assisted suicide and physician-assisted suicide, under the umbrella term of assisted dying, from a pro-assisted dying perspective. It outlines the key principles underpinning the debate around assisted dying and refutes the main arguments put forward by those opposing legalisation of assisted dying in the UK.

  11. Neuroanatomical Correlates of Suicide in Psychosis: The Possible Role of von Economo Neurons

    PubMed Central

    Schöbel, Andreas; Karau, Ramona; Faustmann, Pedro M.; Dermietzel, Rolf; Juckel, Georg

    2011-01-01

    Suicide is the most important incident in psychiatric disorders. Psychological pain and empathy to pain involves a neural network that involves the anterior cingulate cortex (ACC) and the anterior insula (AI). At the neuronal level, little is known about how complex emotions such as shame, guilt, self-derogation and social isolation, all of which feature suicidal behavior, are represented in the brain. Based on the observation that the ACC and the AI contain a large spindle-shaped cell type, referred to as von Economo neuron (VEN), which has dramatically increased in density during human evolution, and on growing evidence that VENs play a role in the pathophysiology of various neuropsychiatric disorders, including autism, psychosis and dementia, we examined the density of VENs in the ACC of suicide victims. The density of VENs was determined using cresyl violet-stained sections of the ACC of 39 individuals with psychosis (20 cases with schizophrenia, 19 with bipolar disorder). Nine subjects had died from suicide. Twenty specimen were available from the right, 19 from the left ACC. The density of VENs was significantly greater in the ACC of suicide victims with psychotic disorders compared with psychotic individuals who died from other causes. This effect was restricted to the right ACC. VEN density in the ACC seems to be increased in suicide victims with psychosis. This finding may support the assumption that VEN have a special role in emotion processing and self-evaluation, including negative self-appraisal. PMID:21731632

  12. Report on von Willebrand Disease in Malaysia

    PubMed Central

    Periayah, Mercy Halleluyah; Halim, Ahmad Sukari; Saad, Arman Zaharil Mat; Yaacob, Nik Soriani; Karim, Faraizah Abdul

    2016-01-01

    BACKGROUND: Von Willebrand disease (vWD) is an inherited hemostatic disorder that affects the hemostasis pathway. The worldwide prevalence of vWD is estimated to be 1% of the general population but only 0.002% in Malaysia. AIM: Our present paper has been written to disclose the statistical counts on the number of vWD cases reported from 2011 to 2013. MATERIAL AND METHODS: This article is based on sociodemographic data, diagnoses and laboratory findings of vWD in Malaysia. A total of 92 patients were reported to have vWD in Malaysia from 2011 to 2013. RESULTS: Sociodemographic-analysis revealed that 60% were females, 63% were of the Malay ethnicity, 41.3% were in the 19-44 year old age group and 15.2% were from Sabah, with the East region having the highest registered number of vWD cases. In Malaysia, most patients are predominately affected by vWD type 1 (77.2%). Factor 8, von Willebrand factor: Antigen and vWF: Collagen-Binding was the strongest determinants in the laboratory profiles of vWD. CONCLUSION: This report has been done with great interest to provide an immense contribution from Malaysia, by revealing the statistical counts on vWD from 2011-2013. PMID:27275342

  13. Killing, letting die and moral perception.

    PubMed

    Gillett, Grant

    1994-10-01

    There are a number of arguments that purport to show, in general terms, that there is no difference between killing and letting die. These are used to justify active euthanasia on the basis of the reasons given for allowing patients to die. I argue that the general and abstract arguments fail to take account of the complex and particular situations which are found in the care of those with terminal illness. When in such situations, there are perceptions and intuitions available that do not easily find propositional form but lead most of those whose practice is in the care of the dying to resist active euthanasia. I make a plea for their intuitions to be heeded above the sterile voice of abstract premises and arguments by examining the completeness of the outline form of the pro-euthanasia argument. In doing so, I make use of Nussbaum's discussion of moral perception and general claims to be found in the literature of moral particularism.

  14. CAE Based Die Face Engineering Development to Contribute to the Revitalization of the Tool & Die Industry

    NASA Astrophysics Data System (ADS)

    Tang, Arthur; Lee, Wing C.; St. Pierre, Shawn; He, Jeanne; Liu, Kesu; Chen, Chin C.

    2005-08-01

    Over the past two decades, the Computer Aided Engineering (CAE) tools have emerged as one of the most important engineering tools in various industries, due to its flexibility and accuracy in prediction. Nowadays, CAE tools are widely used in the sheet metal forming industry to predict the forming feasibility of a wide variety of complex components, ranging from aerospace and automotive components to household products. As the demand of CAE based formability accelerates, the need for a robust and streamlined die face engineering tool becomes more crucial, especially in the early stage when the tooling layout is not available, but a product design decision must be made. Ability to generate blank, binder and addendum surfaces with an appropriate layout of Drawbead, Punch Opening Line, Trim Line are the primary features and functions of a CAE based die face engineering tool. Once the die face layout is ready, a formability study should be followed to verify the die face layout is adequate to produce a formable part. If successful, the established die face surface should be exported back to the CAD/CAM environment to speed up the tooling and manufacturing design process with confidence that this particular part is formable with this given die face. With a CAE tool as described above, the tool & die industry will be greatly impacted as the processes will enable the bypass of hardware try-out and shorten the overall vehicle production timing. The trend has shown that OEMs and first tiers will source to low cost producers in the world which will have a negative impact to the traditional tool & die makers in the developed countries. CAE based tool as described should be adopted, along with many other solutions, in order to maintain efficiency of producing high quality product and meeting time-to-market requirements. This paper will describe how a CAE based die face engineering (DFE) tool could be further developed to enable the traditional tool & die makers to meet the

  15. [The search for "od." Karl Ludwig Freiheer von Reichenbach (1788-1869) and Karl Wilhelm Mayrhofer (1806-1853), two joined against Justus von Liebig].

    PubMed

    Habacher, M

    1980-05-01

    The author describes the controversy between Justus von Liebig on one side and Reichenbach and Mayrhofer on the other side. It is a controversy about problems of science and medicine which are characteristic for the late 18th and the first half of the 19th century, when Mesmerism and similar ideas of occultic and comparative phenomenona were discussed and often refused as being "not scientific". Justus von Liebig and Karl Ludwig Freiherr von Reichenbach were both chemists, both interested in scientific progress and working in this field. They were friends in the years 1830 to 1848. But later on this friendship ended when Reichenbach--who in the mean time moved to Vienna--became more and more interested in phenomenons seen by sensitive persons concerning effects of light. Although Reichenbach himself was not able to recognize the phenomenons he was sure that other persons had this ability. He had the impression that there is a special force floating through the universe, and this force he called "od". Liebig, who was not able to follow this theory and rejected it has speculation, turned against Reichenbach in 1852-3. So the controversy began and their old friendship came to an end. Reichenbach's theory of the "od", characteristic for the time of the romanticism and leading back to Mesmerism was accepted and supported by the Austrian physician Dr. Karl Wilhelm Mayrhofer who had aroused his interest by describing similar phenomenos some of this patients had. The letters of both men, the chemist and the doctor, which are well preserved (Technical Museum of Vienna) and discussed here, give a good impression of Reichenbach's ideas concerning his theory of the "od" and his philosophical ideas. As Reichenbach tried to find a philosophy corresponding to his theory and as he meant to have found this in the philosophy of Friedrich Eduard Beneke his remarks in those letters give a good information about Beneke's discussion of Reichenbach's theory. Mayrhofer, on the other hand

  16. [The search for "od." Karl Ludwig Freiheer von Reichenbach (1788-1869) and Karl Wilhelm Mayrhofer (1806-1853), two joined against Justus von Liebig].

    PubMed

    Habacher, M

    1980-05-01

    The author describes the controversy between Justus von Liebig on one side and Reichenbach and Mayrhofer on the other side. It is a controversy about problems of science and medicine which are characteristic for the late 18th and the first half of the 19th century, when Mesmerism and similar ideas of occultic and comparative phenomenona were discussed and often refused as being "not scientific". Justus von Liebig and Karl Ludwig Freiherr von Reichenbach were both chemists, both interested in scientific progress and working in this field. They were friends in the years 1830 to 1848. But later on this friendship ended when Reichenbach--who in the mean time moved to Vienna--became more and more interested in phenomenons seen by sensitive persons concerning effects of light. Although Reichenbach himself was not able to recognize the phenomenons he was sure that other persons had this ability. He had the impression that there is a special force floating through the universe, and this force he called "od". Liebig, who was not able to follow this theory and rejected it has speculation, turned against Reichenbach in 1852-3. So the controversy began and their old friendship came to an end. Reichenbach's theory of the "od", characteristic for the time of the romanticism and leading back to Mesmerism was accepted and supported by the Austrian physician Dr. Karl Wilhelm Mayrhofer who had aroused his interest by describing similar phenomenos some of this patients had. The letters of both men, the chemist and the doctor, which are well preserved (Technical Museum of Vienna) and discussed here, give a good impression of Reichenbach's ideas concerning his theory of the "od" and his philosophical ideas. As Reichenbach tried to find a philosophy corresponding to his theory and as he meant to have found this in the philosophy of Friedrich Eduard Beneke his remarks in those letters give a good information about Beneke's discussion of Reichenbach's theory. Mayrhofer, on the other hand

  17. Die casting die deflections: Prediction and attenuation. Final report, July 1, 1995--September 30, 1997

    SciTech Connect

    Miller, R.A.; Ahuett-Garza, H.; Choudhury, A.K.; Dedhia, S.

    1998-05-01

    This report summarizes two years of research intended to develop methods to model and predict the deflection patterns in die casting dies. No comprehensive analysis of this type had previously been completed. The die casting process is complex and involves numerous mechanical and thermal phenomena that effect the mechanical behavior of the die. A critical activity in this work was sorting out and evaluating the relative contributions of the various mechanisms to die deflections. This evaluation was accomplished through a series of simple engineering analyses based primarily on the order of magnitude of the influence of each load considered on die deflections. A modeling approach incorporating commercially available finite element analysis software was developed and tested. The model evolved by testing simple models against more comprehensive models and against the limited experimental data that is available. The development of the modeling approach lead to consideration of the die casting machine in more detail than was originally anticipated. The machine is critical and cannot be ignored. A simplified model described as a spring/platen model was developed to account for the machine platens, tie bars, and toggles. The characteristics of this model are described and predictions based on this model are compared against full machine models and measured deflections of machine platens. Details of the modeling approach and the various case studies are provided in the report and in several publications that have resulted from the work.

  18. Effect of Die Strength and Work Piece Strength on the Wear of Hot Forging Dies

    NASA Astrophysics Data System (ADS)

    Levy, B. S.; Van Tyne, C. J.

    2015-01-01

    The effect of the strength ratio extracted from an Archard model for wear is used to describe the wear rates expected in hot forging dies. In the current study, the strength ratio is the strength of the hot forging die to the strength of the work piece. Three hot forging die steels are evaluated. The three die steels are FX, 2714, and WF. To determine the strength of the forging die, a continuous function has been developed that describes the yield strength of three die steels for temperatures from 600 to 700 °C and for times up to 20 h (i.e., tempering times of up to 20 h). The work piece material is assumed to be AISI 1045. Based on the analysis, the wear resistance of WF should be superior and FX should be slightly better than 2714. Decreasing the forging temperature increases the strength ratio, because the strength of the die surface increases faster than the flow strength of AISI 1045. The increase in the strength ratio indicates a decrease in the expected wear rate.

  19. Investigation of Die Stress Profiles during Powder Compaction using Instrumented Die

    SciTech Connect

    Hong, Sung-tae; Hovanski, Yuri; Lavender, Curt A.; Weil, K. Scott

    2008-06-01

    The radial stress profile in a cylindrical die during compaction of titanium (Ti) powder was investigated by experiments. The concept of an instrumented die was extended to design an enhanced instrumented die. Custom-made strain gage pins were used to measure the radial stress during powder compaction. The test fixture was designed to simulate double-action pressing. The measured die stress profile for Ti powder was compared with that for a commercially available iron (Fe) powder. The stress history shows that an appreciable residual stress remains in the die in the radial direction after the axial compaction stress is removed from the powder. Furthermore, the radial stress profile in the die, while under maximum axial compaction stress, is more uniform across the height of the Fe compact than that of the Ti compact. In addition, the residual stress profile in the die in the radial direction reduces symmetrically in both directions beyond the height of the compact for both powders. Finally, the Ti powder shows a significantly higher frictional coefficient at the maximum axial compaction stress, and consequently a higher maximum axial ejection stress than the Fe powder.

  20. Deformation properties of pharmaceutical excipients determined using an in-die and out-die method.

    PubMed

    Ilić, Ilija; Govedarica, Biljana; Šibanc, Rok; Dreu, Rok; Srčič, Stane

    2013-03-25

    This study investigated deformation mechanisms of some commonly used pharmaceutical fillers, such as microcrystalline cellulose, lactose, dicalcium phosphate, isomalt and cornstarch, using a combination of the in-die and out-die method with the Heckel and Walker models. The tableting mixtures contained of 98.5% (w/w) filler, the rest consisted of dry binder and an antiadhesive agent. Our results showed that plasticity and elasticity may be considered independent deformation properties as highly plastic materials (microcrystalline cellulose, cornstarch) also exhibited high elasticity. Particular emphasis was placed on explaining the differences observed between the in-die and out-die method-comparison revealed that the differences are a consequence of the material's elastic properties. Larger error of in-die results can be expected for more elastic materials, and thus in-die Heckel should be used with some considerations. In contrast, the Walker model was found to be more robust and smaller differences were observed between the two methods. We consider the most correct results to have been obtained by the out-die approach, which excludes the elastic properties of the material evaluated. An excellent correlation between elastic determination at the single-particle level and multiple-particle scale was demonstrated, suggesting a great potential of nanoscale determination of a material's mechanical properties for better elucidation of deformation mechanisms.

  1. Von Neumann's growth model: Statistical mechanics and biological applications

    NASA Astrophysics Data System (ADS)

    De Martino, A.; Marinari, E.; Romualdi, A.

    2012-09-01

    We review recent work on the statistical mechanics of Von Neumann's growth model and discuss its application to cellular metabolic networks. In this context, we present a detailed analysis of the physiological scenario underlying optimality à la Von Neumann in the metabolism of the bacterium E. coli, showing that optimal solutions are characterized by a considerable microscopic flexibility accompanied by a robust emergent picture for the key physiological functions. This suggests that the ideas behind optimal economic growth in Von Neumann's model can be helpful in uncovering functional organization principles of cell energetics.

  2. A von Bertalanffy growth model with a seasonally varying coefficient

    USGS Publications Warehouse

    Cloern, James E.; Nichols, Frederic H.

    1978-01-01

    The von Bertalanffy model of body growth is inappropriate for organisms whose growth is restricted to a seasonal period because it assumes that growth rate is invariant with time. Incorporation of a time-varying coefficient significantly improves the capability of the von Bertalanffy equation to describe changing body size of both the bivalve mollusc Macoma balthicain San Francisco Bay and the flathead sole, Hippoglossoides elassodon, in Washington state. This simple modification of the von Bertalanffy model should offer improved predictions of body growth for a variety of other aquatic animals.

  3. The Biodemography of Fertility: A Review and Future Research Frontiers.

    PubMed

    Mills, Melinda C; Tropf, Felix C

    In sozialwissenschaftlichen Untersuchungen von Fertilitätsentscheidungen und –verhalten sind biodemographische Ansätze bislang kaum integriert worden, was zu überwiegend sozial-deterministischen Theorien und Befunden geführt hat. Der vorliegende Beitrag diskutiert zunächst die Gründe für diese weitgehend fehlende Integration, gibt dann einen Überblick über frühere Untersuchungen, fasst die bisher vorliegenden Erkenntnisse zusammen und zeigt schließlich Perspektiven zukünftiger Forschung auf. Ausgehend von grundlegenden Arbeiten zu den proximalen Determinanten der Fertilität werden verhaltensgenetische (Familien- und Zwillings-)Studien besprochen, die das Ausmaß genetischer Einflüsse auf Fertilitätsmerkmale isolieren konnten. Anschließend wird die Forschung zur Gen-Umwelt-Interaktion, zur Bedeutung von kohorten- und länderspezifischen Analysen sowie von Modellen, die Bildung und Fertilitätsentscheidungen vorausgehende Motivlagen berücksichtigen, betrachtet. Darüber hinaus werden Möglichkeiten und Grenzen molekulargenetischer Studien besprochen, bevor schließlich ein kurzer Überblick über Arbeiten aus der evolutionären Anthropologie und Biologie mit einem Fokus auf den Aspekt der natürlichen Auslese gegeben wird. Es zeigt sich, dass biologische und genetische Faktoren für das Verständnis und die Vorhersage von Fertilitätsmerkmalen relevant sind und dass ihre Interaktion mit sozialen Umweltfaktoren zentral für das Verständnis von Fertilitätsoutcomes ist. Für die Vorhersage zukünftiger Fertilitätstrends wird die Untersuchung des Zusammenspiels von Gen-Umwelt-Faktoren sowie die Nutzbarmachung neuer Datenquellen und die Integration neuer Methoden eine wesentliche Rolle spielen.

  4. A profile of silicosis cases who died.

    PubMed

    Phoon, W H

    1982-01-01

    Silicosis cases which had been notified by doctors and confirmed after investigations were followed up by the Industrial Health Division. Up to August 1981, a total of 313 persons were confirmed as having the disease. Of these, 59 had died. The majority of these 59 persons had had their silica exposure in the granite quarries. 13 had been exposed to "rubber powder" which contained a high percentage of free silica. 52 of those who died were male, and their average age at death was 60.87 years. This did not appear to be significantly shorter than their life expectancy of 65.1 years. But the average age of death for the 7 women was 58.86 years, which was much shorter than their life expectancy of 70 years. Many of the men died from causes unrelated to silicosis. But 6 of the 7 women had progressive massive fibrosis (PMF) and they apparently died of the disease or complications arising from it.

  5. The Onion and "When Legends Die."

    ERIC Educational Resources Information Center

    Bell, Loren C.

    1984-01-01

    Describes the eight layers in Thomas Black Bull's ("When the Legends Die") journey to spiritual rebirth and stresses that students can easily identify these layers and can thereby achieve a clearer understanding of the relationship between structure and meaning in fiction. (CRH)

  6. Weltall im Wandel. Die neue Astronomie.

    NASA Astrophysics Data System (ADS)

    Elsässer, H.

    Contents: Alte und neue Astronomie. Die Sterne des Milchstraßensystems. Sternentstehung und interstellare Materie. Unser Sonnensystem und seine Geschichte. Interplanetarer Staub. Vom Sterben der Sterne. Arbeitsmittel der optischen Astronomie. Ein neues Zentrum astronomischer Forschung. Galaxien. Ursprung und Entwicklung des Weltalls.

  7. Expectation and Variation with a Virtual Die

    ERIC Educational Resources Information Center

    Watson, Jane; English, Lyn

    2015-01-01

    By the time students reach the middle years they have experienced many chance activities based on dice. Common among these are rolling one die to explore the relationship of frequency and theoretical probability, and rolling two dice and summing the outcomes to consider their probabilities. Although dice may be considered overused by some, the…

  8. The Academic Study of Death and Dying.

    ERIC Educational Resources Information Center

    Amend, Edward W.

    The current study of death and dying is an example of constant change and development in academic disciplines. While the discussion of death in time of crisis is hard, if not impossible, youthful undergraduates find this topic to be of considerable interest. For them, a course can be organized effectively as a small and intimate seminar, which…

  9. Mold Die Making. 439-322/324.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on mold die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 10 units in this guide: (1) introduction to Electrical Discharge Machining (EDM); (2) EDM principles; (3) the single pulse; (4) EDM safety; (5) electrode material; (6) electrode…

  10. Continuing Education on Dying and Death.

    ERIC Educational Resources Information Center

    Chodil, Judith J.; Dulaney, Peggy E.

    1984-01-01

    "Dying and Death in Critical Care Practice" was a one-day continuing education offering designed for registered nurses who practiced in settings such as emergency rooms, intensive care units, coronary care units, and operating rooms. The workshop was part of a continuing education curriculum in critical care nursing. (SSH)

  11. Care of the Dying: A Swedish Perspective

    ERIC Educational Resources Information Center

    Feigenberg, Loma; Fulton, Robert

    1977-01-01

    This article illustrates various aspects of terminal care, and shows that rules and norms for such care do not exist today. The authors advocate the formulation of an aim for humane treatment of dying patients, and its application in a manner appropriate to Swedish medical concepts and Swedish conditions. (Author)

  12. Asymmetric Die Grows Purer Silicon Ribbon

    NASA Technical Reports Server (NTRS)

    Kalejs, J. P.; Chalmers, B.; Surek, T.

    1983-01-01

    Concentration of carbide impurities in silicon ribbon is reduced by growing crystalline ribbon with die one wall higher than other. Height difference controls shape of meniscus at liquid/crystal interface and concentrates silicon carbide impurity near one of broad faces. Opposite face is left with above-average purity. Significantly improves efficiency of solar cells made from ribbon.

  13. Ceramic for Silicon-Shaping Dies

    NASA Technical Reports Server (NTRS)

    Sekercioglu, I.; Wills, R. R.

    1982-01-01

    Silicon beryllium oxynitride (SiBON) is a promising candidate material for manufacture of shaping dies used in fabricating ribbons or sheets of silicon. It is extremely stable, resists thermal shock, and has excellent resistance to molten silicon. SiBON is a solid solution of beryllium silicate in beta-silicon nitride.

  14. Flexible, Ultra-Thin, Embedded Die Packaging

    NASA Astrophysics Data System (ADS)

    McPherson, Ryan J.

    As thin, flexible electronics solutions become more robust, their integration into everyday life becomes more likely. With possible applications in wearable electronics, biomedical sensors, or 'peel and stick' sensors, the reliability of these ultra-thin packages becomes paramount. Likewise, the density achievable with stacked packages benefits greatly from thinner die stacks. To this end, techniques previously developed have demonstrated packages with die thinned to approximately 20mum. Covered in this work are methods for thinning and packaging silicon die, as well as information on common materials used in these processes. The author's contribution is a fabrication process for embedding ultra-thin (approximately 10mum) silicon die in polyimide substrates. This method is fully illustrated in Chapter 3 and enumerated in the Appendix as a quick reference. Additionally, thermal cycle testing of passive daisy chain assemblies has shown promising reliability data. Packages were mounted in three alignments: flat, concave, and convex, and placed into thermal shock testing. Finally, the author discusses possible applications for this fabrication process, including the fabrication of multi-chip-modules.

  15. Stamping Die Making. 439-318/320.

    ERIC Educational Resources Information Center

    Yunke, P.; And Others

    Each unit in this curriculum guide on stamping die making contains an introduction, objectives, materials required, lessons, space for notes, figures, and diagrams. There are 29 units in this guide, dealing with the following topics: EZ-MILL programming; EZ-MILL BATT; print of punch and EZ-MILL part programming; download to Computer Numerical…

  16. Hermann von Helmholtz and the empiricist vision.

    PubMed

    Turner, R S

    1977-01-01

    The philosophical convictions of Hermann von Helmholtz and the empiricist psychology he developed have been extensively discussed in historical literature. This literature has not usually emphasized the tacti assumptions about human physiology that underlaid these convictions nor the way in which Helmholtz's epistemology served as a methodological directive in his research. Helmholtz assumed nerve transmission between sense organs and the mind to be a passive process. Distortion in stimulus patterns occurs physically in the sense organs, which can therefore be treated through mechanical analogies. Stimuli become converted to the perceptions of consciousness through mental processes that are essentially analogous to conscious, inductive inference and that are therefore susceptible, in principle, to introspective investigation. This view of mental function reflected Helmholtz's intellectual debt to German idealism, especially to the philosophical views of J.G. Fichte.

  17. Hermann von Helmholtz and his students

    NASA Astrophysics Data System (ADS)

    Mulligan, Joseph F.

    1989-01-01

    During the years 1871-1888, when Hermann von Helmholtz was professor of physics at the University of Berlin, physicists from all over the world flocked to Berlin to study and do research with him. Among these were the German physicists Max Planck, Heinrich Kayser, Eugen Goldstein, Wilhelm Wien, and Heinrich Hertz, and Americans Henry Rowland, A. A. Michelson, and Michael Pupin. Examples of Helmholtz's scientific and personal interactions with these students and research associates show why he is justly considered the outstanding physics mentor of the 19th century. Both his ideas and his students played a major role in the development of physics in the late 19th and early 20th centuries.

  18. Organisationsübergreifendes Management von Föderations-Sicherheitsmetadaten auf Basis einer Service-Bus-Architektur

    NASA Astrophysics Data System (ADS)

    Graf, Stephan; Hommel, Wolfgang

    In service-orientierten Architekturen wird die herkömmliche web-service-basierte Punkt-zu-Punkt-Kommunikation zunehmend durch den Einsatz eines Enterprise Service Bus (ESB) abgelöst, der den sicheren und zuverlässigen Nachrichtentransport realisiert. Der Einsatzbereich eines ESB endet jedoch an den Grenzen der ihn einsetzenden Institution. In diesem Artikel analysieren wir aktuelle Herausforderungen bei der organisationsübergreifenden Verwaltung von Sicherheitsmetadaten, zu denen insbesondere Serverzertifikate und Privacy Policies gehören. Als konkretes Szenario wird dabei das Federated Identity Management im Rahmen der deutschen Hochschulföderation DFN-AAI aufgegriffen. Als standardbasierte, einheitliche Lösung, die proprietäre sowie metadatentyp-spezifische Ansätze integriert und den damit verbundenen Administrationsaufwand reduziert, schlagen wir einen organisationsübergreifenden ESB vor, den wir als Federation Service Bus (FedSB) bezeichnen. Wir diskutieren seine technischen Eigenschaften, das zugrunde liegende Kommunikationsmodell und die organisatorischen Schritte zur Einführung.

  19. Director von Braun Presents General Medaris With Golf Bag

    NASA Technical Reports Server (NTRS)

    1959-01-01

    Marshall Space Flight Center Director Wernher von Braun presents General J.B. Medaris with a new golf bag. General Medaris, (left) was a Commander of the Army Ballistic Missile Agency (ABMA) in Redstone Arsenal, Alabama during 1955 to 1958.

  20. 1. Historic American Buildings Survey David von Riesen, Photographer July ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Historic American Buildings Survey David von Riesen, Photographer July 1965 BARRACKS (West), Left - BARRACKS (East), Right (Combined into New Barn) - Fort Larned, Barracks (West), Larned, Pawnee County, KS

  1. 1. Historic American Buildings Survey David von Riesen, Photographer July ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Historic American Buildings Survey David von Riesen, Photographer July 1965 BARRACKS (West), Left - BARRACKS (East), Right (Combined into New Barn) - Fort Larned, Barracks (East), Larned, Pawnee County, KS

  2. A proof of von Neumann's postulate in Quantum Mechanics

    SciTech Connect

    Conte, Elio

    2010-05-04

    A Clifford algebraic analysis is explained. It gives proof of von Neumann's postulate on quantum measurement. It is of basic significance to explain the problem of quantum wave function reduction in quantum mechanics.

  3. 33. HISTORIC VIEW OF WERNHER VON BRAUN LOOKS THROUGH THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. HISTORIC VIEW OF WERNHER VON BRAUN LOOKS THROUGH THE PERISCOPE FROM THE CONTROL ROOM AT TEST STAND NO. 1, PEENEMUENDE. - Marshall Space Flight Center, Redstone Rocket (Missile) Test Stand, Dodd Road, Huntsville, Madison County, AL

  4. Dr. Wernher Von Braun examines a ruby crystal.

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Dr. Wernher Von Braun (right), director of the Marshall Space Flight Center, and Dr. Eberhard Rees (left), deputy director, technical, examine a ruby crystal used in laser experiments in the Marshall Center's Space Sciences Laboratory.

  5. Computed tomography of the liver in von Gierke's disease.

    PubMed

    Biondetti, P R; Fiore, D; Muzzio, P C

    1980-10-01

    The computed tomography findings in the liver of a patient with von Gierke's disease are presented. Precontrast scans demonstrated diffuse decreased density throughout the liver. In the postcontrast scans, a focal right sided hyperdense area was visualized. PMID:6931833

  6. Dr. von Braun Escorts President Kennedy and Vice President Johnson

    NASA Technical Reports Server (NTRS)

    1962-01-01

    Marshall Space Flight Center Director Dr. Wernher von Braun explains a detail from a Saturn IB mockup and engine to President John F. Kennedy, Vice President Lyndon Johnson and other guests, September 11, 1962.

  7. [Anguish about death and fear of dying, supportive care for the dying].

    PubMed

    Bouregba, A; Lebret, T

    2008-11-01

    During metastatic patient follow up, anguish about death is different from the fear of dying. In fact anguish is unconscious and associated with anxiety, on the other hand the fear of dying is a reaction to the threat of imminent death. Physical pain and isolation are factors that increase the pangs of death. The support of friends and family constitutes a real benefit for the treatment of patients during this period.

  8. Wernher von Braun with German Officers and Others

    NASA Technical Reports Server (NTRS)

    1942-01-01

    General Erich Fellgiebel, head of the German Army Information Service during World War II, congratulates members of the von Braun rocket team from Peenemunde for their October 3, 1942 A4 flight. Pictured front center is General Erich Fellgiebel. Shaking hands are General Walter Dornberger (left) and General Janssen, commanding officer of Peenemuende with Rudolph Hermarn to their right. Picture left to right in the back row are Wernher von Braun, Captain Stoelzel, Luftwaffe, and Dr. Gerhard Reisig.

  9. Neurological Management of Von Hippel-Lindau Disease.

    PubMed

    Hodgson, Trent S; Nielsen, Sarah M; Lesniak, Maciej S; Lukas, Rimas V

    2016-09-01

    Von Hippel-Lindau disease is a genetic condition due to mutation of the Von Hippel-Lindau gene, which leads to an increased risk in the development of hemangioblastomas of the brain and spinal cord. The pathophysiology of disease and its clinical manifestations, as they pertain to the general neurologist, are discussed. Therapeutic management of central nervous system hemangioblastomas ranging from neurosurgical resection, radiation therapy, and systemic therapies is reviewed. PMID:27564075

  10. Communicative positioning of one's own profession in interprofessional settings.

    PubMed

    Posenau, André; Peters, Tim

    2016-01-01

    Zielsetzung: Interprofessional Education (IPE) ist im sich ausdifferenzierenden Gesundheitssystem von wachsender Bedeutung und nimmt bei der Lehre in Gesundheitsberufen einen immer größeren Raum ein. Der Großteil der Konzepte und Verfahren in diesem Bereich basiert auf normativen Vorstellungen über interprofessionelle Kooperation und ist selten empirisch fundiert. Dieser Beitrag ist ein erster Versuch, die deduktive Herangehensweise mit einer induktiven Perspektive zu ergänzen, um didaktische Konzepte des IPE anschließend empirisch zu untermauern. Methodik: Mithilfe des qualitativen Ansatzes der linguistischen Gesprächsanalyse werden explorativ anhand von im Unterricht aufgezeichneten Simulationen mit Studierenden der Pflege und Hebammenkunde sprachliche Professionsmarker herausgearbeitet, von denen ausgegangen wird, dass sie für relevante interprofessionelle Kommunikationsprozesse von Bedeutung sind und damit die konkrete Zusammenarbeit von Gesundheitsberufen beeinflussen. Diese werden kategorisiert, kommentiert und ihre Bedeutung für die Lehre und die praktische Umsetzung in interprofessionellen Interaktionen herausgestellt. Ergebnisse: Die Studierenden nutzen verschiedene Professionsmarker regelmäßig in den Simulationen. Allerdings treten diese - außer bei der Abgrenzung zu Ärzten - nicht so häufig wie zunächst erwartet auf. Gleichzeitig sind alle Interaktionen von starker Imagearbeit zwischen den Studierenden geprägt, die einen großen Raum in den beobachteten Interaktionen einnimmt. Auch bei der Aufgabendelegation und -beanspruchung scheinen die professionsspezifischen Kommunikations- und Abgrenzungsverfahren sich erst langsam zu etablierenden. Zudem spielt die Studierendenrolle eine nicht zu unterschätzende Funktion in den Interaktionen.Schlussfolgerung: Professionsmarkierungen sind ein wesentlicher Bestandteil interprofessionelle Kommunikation und basieren auf einer (hier nur ausschnitthaft präsentierten) Vielzahl beobachtbarer sprachlicher

  11. BOOK REVIEW: Meilensteine der Astronomie - Von Aristoteles bis Hawking

    NASA Astrophysics Data System (ADS)

    Duerbeck, H. W.; Hamel, J.

    2006-12-01

    neglected, other astronomers? Before the chapter dealing with Aristoteles and other Greek thinkers, the author presents a very good introduction to prehistoric astronomy. Subsequent chapters cover medieval times (Sacrobosco), Copernicus, instruments (Apian), calendars and their makers, telescopes and theological conflicts, women in astronomy and celestial mechanics, "amateur" astronomers (Herschel and Bessel), philosophy and science (Kant and successors). "At the limits of knowledge" is the title of the last, somewhat scanty chapter on 20th century astronomy. The only confusing text is found on p. 43: Die exzentrische Lage der Spharen wurde von Hipparch im 2. Jahrhundert v. Chr. eingefuhrt. Cum grano salis, this is correct; Hipparchos assumed an eccentric orbit for the Sun. Furthermore, die Erde steht im Mittelpunkt des Deferenten, jedoch um den Betrag der Exzentrizitat E vom Mittelpunkt des Exzenters entfernt. A figure showing a deferent circle (and attached epicycle) with center M, and a lower point E called center of world = center of Earth in the caption, tries to illustrate this. The desperate reader does not find the eccenter in the figure, and also does not appreciate why the Earth is in the center of the deferent M when the caption says it is in E. The explanation is that for a planet, having two anomalies, the epicycle does not run on a concentric circle, usually called deferent, but on an eccenter. Thus, in the figure, the circle labelled deferent is the eccenter. In Cellarius' Harmonia Macrocosmica, Table 14, a similar figure explains it all: Eccentricus deferens epicyclum - the eccenter that carries around the epicycle. Since we have switched to Latin, we should mention that on p. 158, we encountered the sentence "in dubia pro res". Perhaps we are permitted to reply "si tacuisses, philosophus mansisses". The reader is cautioned: if this book is used as a road atlas for the history of astronomy, the reader will often find very rough sketches of the progress of

  12. Non-isothermal analysis of die corner gap formation for materials deformed by multi-pass ECAP

    NASA Astrophysics Data System (ADS)

    Medeiros, N.; Moreira, L. P.

    2014-08-01

    In this paper, the upper-bound solutions proposed by Eivani and Karimi Taheri [Comp. Mater. Sci. 42 (2008) 14] to calculate processing force and evaluate die corner angle Ψ formation in terms of tribology and die configurations during cold single pass equal channels angular pressed metals with constant flow stress were extended to work-hardening metals processed by two passes according to route A by using the Swift model combined to von Mises isotropic plasticity criterion. Also, adiabatic heat equation was coupled to solutions to express the final temperature of the workpiece. For that, thermomechanical properties of a hot-dip galvanized interstitial-free (IF) were considered and its behavior under pressing was evaluated to non-hardening and work-hardening conditions in all performed analyses. By including work-hardening in the models and for the critical friction factor of 0.4, theoretical predictions after single pass showed a decreasing of die corner angle and pressing force predictions and increasing of effective plastic strain and end temperature for all friction conditions and tooling geometries evaluated. In addition, after second pass, these responses showed higher values. Finally, with the proposed upper-bound models it was possible to analyze the dependency of angle Ψ, effective plastic strain, pressing load and sample temperature with the instantaneous workpiece height at the entry surface of deformation zone.

  13. Spiritual aspects of death and dying.

    PubMed Central

    Mermann, A. C.

    1992-01-01

    Dying is an event beyond our comprehension, an experience that can only be imagined. Patients with cancer have a gift denied many others: some time to prepare for the approaching end of life. This time can be used to bring old conflicts to a close, to say goodbye and seek forgiveness from others, to express love and gratitude for the gifts of a life. Physicians can help patients by being aware of the spiritual dimensions to life that many patients have. In major religious traditions, death is accepted as the natural end of the gift of life and as a point of transition to another, yet unknown, existence. For many patients, it is not death that is feared, but abandonment. The physician's awareness of the spiritual needs of patients can make care of the dying more rewarding and fulfilling for all concerned. PMID:1519377

  14. Architecture for on-die interconnect

    DOEpatents

    Khare, Surhud; More, Ankit; Somasekhar, Dinesh; Dunning, David S.

    2016-03-15

    In an embodiment, an apparatus includes: a plurality of islands configured on a semiconductor die, each of the plurality of islands having a plurality of cores; and a plurality of network switches configured on the semiconductor die and each associated with one of the plurality of islands, where each network switch includes a plurality of output ports, a first set of the output ports are each to couple to the associated network switch of an island via a point-to-point interconnect and a second set of the output ports are each to couple to the associated network switches of a plurality of islands via a point-to-multipoint interconnect. Other embodiments are described and claimed.

  15. Fatigue of die cast zinc alloys

    SciTech Connect

    Schrems, K.K.; Dogan, O.N.; Goodwin, F.E.

    2006-04-01

    The rotating bending fatigue limit of die cast zinc alloy 2, alloy 3, alloy 5, AcuZinc 5, and ZA-8 were determined as a part of an on-going program by ILZRO into the mechanical properties of die cast zinc. The stress-life (S-N) curves of alloys 3, 5, AcuZinc 5, and ZA-8 were determined previously. This presentation reports the results of the S-N curve for Alloy 2 and the calculated fatigue limits for all five alloys. During the previous stress-life testing, the samples were stopped at 10 million cycles and the fatigue limit for alloy 3, alloy 5, and AcuZinc 5 appeared to be higher and the fatigue limit for ZA-8 appeared to be lower than the values reported in the literature. This was further investigated in alloy 5 and ZA-8 by testing continuous cast bulk alloy 5 and ZA-8.

  16. Spiritual aspects of death and dying.

    PubMed

    Mermann, A C

    1992-01-01

    Dying is an event beyond our comprehension, an experience that can only be imagined. Patients with cancer have a gift denied many others: some time to prepare for the approaching end of life. This time can be used to bring old conflicts to a close, to say goodbye and seek forgiveness from others, to express love and gratitude for the gifts of a life. Physicians can help patients by being aware of the spiritual dimensions to life that many patients have. In major religious traditions, death is accepted as the natural end of the gift of life and as a point of transition to another, yet unknown, existence. For many patients, it is not death that is feared, but abandonment. The physician's awareness of the spiritual needs of patients can make care of the dying more rewarding and fulfilling for all concerned.

  17. Dying in hospital: the residents' viewpoint

    PubMed Central

    Ahmedzai, S

    1982-01-01

    A survey of residents' (junior house officers') experiences and attitudes to the terminal care part of their work in four Glasgow teaching hospitals showed that even a month after starting work one-fifth of the respondents had not actively managed a dying patient. Sixty-four per cent thought that they had received inadequate teaching in terminal care. Depression and anxiety had been the most difficult symptoms encountered. The residents thought that the ward nursing staff contributed much more than their senior medical colleagues to both the medical and psychological aspects of terminal care. The results indicate a need for more undergraduate education in the most relevant areas, such as coping with the psychological problems of dying patients and their relatives. Newly qualified residents require more support from senior medical staff in looking after the terminally ill. PMID:6809204

  18. Historical review of die drool phenomenon during plastics extrusion

    NASA Astrophysics Data System (ADS)

    Musil, Jan; Zatloukal, Martin

    2013-04-01

    Die drool phenomenon is defined as unwanted spontaneous accumulation of extruded polymer melt on open faces of extrusion die during extrusion process. Such accumulated material builds up on the die exit and frequently or continually sticks onto the extruded product and thus damages it. Since die drool appears, extrusion process must be shut down and die exit must be manually cleaned which is time and money consuming. Although die drool is complex phenomenon and its formation mechanism is not fully understood yet, variety of proposed explanations of its formation mechanism and also many ways to its elimination can be found in open literature. Our review presents in historical order breakthrough works in the field of die drool research, shows many ways to suppress it, introduces methods for its quantitative evaluation and composition analysis and summarizes theories of die drool formation mechanism which can be helpful for extrusion experts.

  19. Euthanasia: why people want to die earlier.

    PubMed

    Seale, C; Addington-Hall, J

    1994-09-01

    The results from two surveys in England of relatives and others who knew people in samples drawn from death certificates are reported. The main focus is on a sample of 3696 people dying in 1990 in 20 health authorities, with supporting analysis from an earlier national sample of 639 people dying in 1987. The incidence of people saying they wanted to die sooner, and of requests for euthanasia are reported. Excluding a proportion who did not wish to express a view, or did not know the answer, about a quarter of both respondents and the people who died expressed the view that an earlier death would be, or would have been, preferable. 3.6% of people in the 1990 study were said to have asked for euthanasia at some point in the last year of life. The extent to which such views were determined by the experience of pain, other distressing symptoms, dependency and social and cultural factors such as religious belief and social class is explored. The finding that dependency was important in causing the feeling that an earlier death would have been better, as well as requests for euthanasia, is related to the public debate about euthanasia, which often contains the assertion that fear of pain is a dominant factor. Pain was found to be a significant factor in death from cancer, but not as important for other causes of death. Social class, place of residence of the deceased, and strength and type of religious faith were found to be largely insignificant in influencing feelings about an earlier death and requests for euthanasia.

  20. Diagnosing dying: an integrative literature review

    PubMed Central

    Kennedy, Catriona; Brooks-Young, Patricia; Brunton Gray, Carol; Larkin, Phil; Connolly, Michael; Wilde-Larsson, Bodil; Larsson, Maria; Smith, Tracy; Chater, Susie

    2014-01-01

    Background To ensure patients and families receive appropriate end-of-life care pathways and guidelines aim to inform clinical decision making. Ensuring appropriate outcomes through the use of these decision aids is dependent on timely use. Diagnosing dying is a complex clinical decision, and most of the available practice checklists relate to cancer. There is a need to review evidence to establish diagnostic indicators that death is imminent on the basis of need rather than a cancer diagnosis. Aim To examine the evidence as to how patients are judged by clinicians as being in the final hours or days of life. Design Integrative literature review. Data sources Five electronic databases (2001–2011): Cochrane Central Register of Controlled Trials (CENTRAL) on The Cochrane Library, MEDLINE, EMBASE, PsycINFO and CINAHL. The search yielded a total of 576 hits, 331 titles and abstracts were screened, 42 papers were retrieved and reviewed and 23 articles were included. Results Analysis reveals an overarching theme of uncertainty in diagnosing dying and two subthemes: (1) ‘characteristics of dying’ involve dying trajectories that incorporate physical, social, spiritual and psychological decline towards death; (2) ‘treatment orientation’ where decision making related to diagnosing dying may remain focused towards biomedical interventions rather than systematic planning for end-of-life care. Conclusions The findings of this review support the explicit recognition of ‘uncertainty in diagnosing dying’ and the need to work with and within this concept. Clinical decision making needs to allow for recovery where that potential exists, but equally there is the need to avoid futile interventions. PMID:24780536

  1. On dying more than one death.

    PubMed

    Shrader, D

    1986-02-01

    Death (with a capital D) can best be understood as a series of distinct but related deaths. For example, a pregnant woman was found to be brain-dead but her vital functions were artificially sustained for nine weeks until her fetus could be delivered, after which the machines were removed and she died a second, conceptually distinct death. This procedure is probably justifiable, but any legislation or policy regarding such cases should be flexible and should require consent.

  2. Medical futility and care of dying patients.

    PubMed Central

    Jecker, N S

    1995-01-01

    In this article, I address ethical concerns related to forgoing futile medical treatment in terminally ill and dying patients. Any discussion of medical futility should emphasize that health professionals and health care institutions have ethical responsibilities regarding medical futility. Among the topics I address are communicating with patients and families, resolving possible conflicts, and developing professional standards. Finally, I explore why acknowledging the futility of life-prolonging medical interventions can be so difficult for patients, families, and health professionals. PMID:7571593

  3. [Sudden die-off of honeybee colonies].

    PubMed

    Muz, Mustafa N

    2008-01-01

    Apis mellifera is used for honeybee keeping all over Turkey. Recently, honeybees have been suddenly disappearing for no apparent reason. It is presumed that some viral and parasitic honeybee pathogens are responsible for this. No medical research has been conducted to determine the pathologic causes of the sudden die-off of the honeybee colonies in Turkey as yet. This is of urgent importance for future of the honeybee industry.

  4. Dying, sudden cardiac death and resuscitation technology.

    PubMed

    Walker, Wendy M

    2008-04-01

    Many nurses will be familiar with the demanding role of caring for a patient who requires cardiopulmonary resuscitation following a sudden, life-threatening illness or event. This paper examines the phenomenon of sudden cardiac death and in particular, focuses on the medical-technical discourse of dying and death in the context of resuscitation for the victims of sudden cardiac arrest. The process of dying is distinguished from the end point of death by drawing upon biomedical determinants and definitions of death. Comparison is made between the use of resuscitation techniques in an attempt to reverse 'clinical death' and the notion of a 'natural death' that is proffered as a means to a 'good' or 'ideal' death. The humanistic versus technological imperative is further deliberated by examining the role of the emergency team in end of life care and includes consideration of the effects that medical dominance may have on the dying process. The practice of family witnessed resuscitation is recognised as one way in which a holistic approach to emergency resuscitative care may be achieved.

  5. Assisted dying - should the UK change its stance?

    PubMed

    Gordon, Daniel; Raphael, Claire E; Vassiliou, Vassilios

    2015-04-01

    Along with an increasing interest in assisted dying by many European and North American countries, some of which have already modified their existing laws to accommodate this, the interest in assisted dying in the UK has increased once again following Lord Falconer's Assisted Dying for the Terminally Ill Bill. Drawing on examples from countries where similar assisted dying laws are already in place, this article analyses and contextualises the proposed bill and discusses its potential pitfalls and benefits for the UK. PMID:25628340

  6. Impact of Temperature on Cooling Structural Variation of Forging Dies

    NASA Astrophysics Data System (ADS)

    Piesova, Marianna; Czan, Andrej

    2014-12-01

    The article is focused on the issue of die forging in the automotive industry. The cooling effect of temperature on the structure of forged die are under review. In the article, there is elaborated the analysis of theoretical knowledge in the field, focusing on die forging and experimentally proven effect of the cooling rate on the final structure of forged dies made of hypoeutectic carbon steel C56E2.

  7. Die and telescoping punch form convolutions in thin diaphragm

    NASA Technical Reports Server (NTRS)

    1965-01-01

    Die and punch set forms convolutions in thin dished metal diaphragm without stretching the metal too thin at sharp curvatures. The die corresponds to the metal shape to be formed, and the punch consists of elements that progressively slide against one another under the restraint of a compressed-air cushion to mate with the die.

  8. A Contextualist Thanatology: A Pragmatic Approach to Death and Dying

    ERIC Educational Resources Information Center

    Reck, Andrew J.

    1977-01-01

    Denying the value of death but accepting its reality, the author points to dying, not death, as the problematic phenomenon with which a pragmatist thanatology must deal. It is suggested that dying contains opportunities for growth--for the dying as well as for their surviving friends and relatives. (Author)

  9. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  10. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  11. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  12. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  13. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  14. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  15. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  16. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  17. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  18. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  19. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  20. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  1. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  2. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  3. 25 CFR 301.3 - Specifications of dies.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Specifications of dies. 301.3 Section 301.3 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.3 Specifications of dies. Dies used are to be entirely hand-made, with no...

  4. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  5. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  6. 25 CFR 304.2 - Marking and ownership of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Marking and ownership of dies. 304.2 Section 304.2 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.2 Marking and ownership of dies. All dies used to mark silver will be provided by...

  7. 25 CFR 301.4 - Application of dies.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Application of dies. 301.4 Section 301.4 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER AND TURQUOISE PRODUCTS; STANDARDS § 301.4 Application of dies. Dies are to be applied to the object with the aid...

  8. 25 CFR 304.5 - Dies to identify tribe.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Dies to identify tribe. 304.5 Section 304.5 Indians INDIAN ARTS AND CRAFTS BOARD, DEPARTMENT OF THE INTERIOR NAVAJO, PUEBLO, AND HOPI SILVER, USE OF GOVERNMENT MARK § 304.5 Dies to identify tribe. Dies are marked with name of tribe. A Navajo stamp will...

  9. Darwin als Sehhilfe für die Psychologie - Evolutionspsychologie

    NASA Astrophysics Data System (ADS)

    Schwab, Frank

    Im Folgenden geht es um Einäugige, stereoskopisches Sehen, weite und enge Horizonte, Monokel und Sonnenbrillen. Der Beitrag versucht die Metapher des Sehens und der Sehhilfen anzuwenden, um so zu verdeutlichen, welchen Gewinn die herkömmliche Psychologie durch die Verwendung einer Darwin'schen Brille erlangen kann.

  10. [Transition from childhood to adolescence-a qualitative study on experiences of adolescents with type 1 diabetes mellitus and their mothers].

    PubMed

    Gabele, Angela; Budde, Jörg; Spichiger, Elisabeth

    2015-04-01

    Hintergrund: In Deutschland erkranken jährlich etwa 2 200 Kinder unter 14 Jahren an Typ 1 Diabetes mellitus (T1DM). Bei Kleinkindern führen die Eltern das Diabetes-Management durch, später übernehmen Kinder einzelne Aufgaben. Während der Transition von der Kindheit zur Adoleszenz, im Alter von 8 – 13 Jahren, lernen Kinder selbstständiger zu werden. Kinder mit T1DM bewältigen eine weitere Transition im Diabetes-Management. Bislang fokussierte die Forschung jedoch auf die Transition Adoleszenz – Volljährigkeit. Fragestellung: Mit der Studie wurden das Erleben von Jugendlichen mit T1DM und ihrer Mütter während der Transition von der Kindheit zur Adoleszenz und die Bedeutung von Selbstständigkeit exploriert. Methode: Die interpretierende phänomenologische Studie fand in zwei süddeutschen Diabetes-Ambulanzen statt. Sechs Jugendliche und ihre Mütter nahmen an Interviews mit offenen Fragen teil. Daten wurden mittels Fall- und thematischer Analyse ausgewertet. Ergebnisse: Jugendliche erlebten die Übernahme der Diabetes-Aufgaben für immer längere Zeiträume und die damit verbundene größere Selbstständigkeit als befreiend. Mütter lernten ihren Kindern dies zuzutrauen. Ihre größte Sorge blieb eine mögliche Hypoglykämie. Familienmitglieder und Lehrer(innen) waren unterschiedlich in das Diabetes-Management involviert. Die kontinuierliche Betreuung durch dieselben Ärzte/Ärztinnen der Ambulanzen wurde als unterstützend erlebt. Schlussfolgerung: Eine kontinuierliche Betreuung durch dieselben Fachpersonen kann sich positiv auf die Transition Kindheit – Adoleszenz von Kindern mit T1DM auswirken.

  11. [Determination of von Willebrand factor multimers in Mexican population].

    PubMed

    Hernández-Zamora, Edgar; Zavala-Hernández, Cesar; Viveros-Sandoval, Martha Eva; Ochoa-Rico, Angeles; Martínez-Murillo, Carlos; Reyes-Maldonado, Elba

    2014-01-01

    Antecedentes: la enfermedad de von Willebrand es un padecimiento hereditario en el que la estructura, función y concentración del factor de von Willebrand están alteradas y, en consecuencia, también la interacción plaqueta-factor de von Willebrand-endotelio. En México no hay registros epidemiológicos de la enfermedad, sólo se han efectuado algunos estudios aislados desde el punto de vista clínico y hematológico. Material y métodos: estudio retrospectivo efectuado en 155 mexicanos mestizos, 75 de ellos con diagnóstico presuntivo de enfermedad de von Willebrand, 15 con sospecha de hemofilia A y 65 donadores sanos (testigos). Se realizaron pruebas: básicas de coagulación, especiales y de clasificación: análisis de la composición multimérica. Resultados: 15 pacientes se diagnosticaron con hemofilia A; de los 75 sujetos con sospecha de enfermedad de von Willebrand se diagnosticaron 50 de la manera siguiente: tipo 1 (62%), tipo 2 (22%) [subtipos: 2A (14%), 2B (2%) y 2N (6%)] y tipo 3 (16%). Conclusión: el análisis de los multímeros del factor de von Willebrand es un método que cumple con las características adecuadas para el diagnóstico de la enfermedad de von Willebrand, por lo que es necesario implementar esta metodología para su estudio y mejorar su diagnóstico específico.

  12. von Willebrand disease in the developing world.

    PubMed

    Srivastava, Alok

    2005-01-01

    von Willebrand disease (VWD) is considered to be the most common inherited bleeding disorder. Data on its epidemiology and impact in developing countries are limited. The biologic heterogeneity and variable presentation of VWD make diagnosis difficult. Although there is no accurate estimate of the prevalence of VWD in developing countries, available data suggest that the proportion of diagnosed cases is lower than the expected number, often accounting for only 6% to 13% of patients with hereditary bleeding disorders. Although accurate subtyping is often not possible, the number with severe disease tends to be much higher, particularly in those parts of the world where consanguinity is common. Agents used to treat patients with VWD range from plasma to purified factor concentrates. Desmopressin (DDAVP) is commonly used. Preliminary data on molecular genetics suggests that there are significant population differences. There is inadequate awareness of this condition and lack of support for these patients from the health care system in many developing countries. Concerted efforts are needed at the scientific and social levels to improve this situation. PMID:15662614

  13. The von Neumann Triple Point Paradox

    NASA Astrophysics Data System (ADS)

    Sanders, Richard; Tesdall, Allen M.

    We describe the problem of weak shock reflection off a wedge and discuss the triple point paradox that arises. When the shock is sufficiently weak and the wedge is thin, Mach reflection appears to be observed but is impossible according to what von Neumann originally showed in 1943. We summarize some recent numerical results for weak shock reflection problems for the unsteady transonic small disturbance equations, the nonlinear wave system, and the Euler equations. Rather than finding a standard but mathematically inadmissible Mach reflection with a shock triple point, the solutions contain a complex structure: there is a sequence of triple points and supersonic patches in a tiny region behind the leading triple point, with an expansion fan originating at each triple point. The sequence of patches may be infinite, and we refer to this structure as Guderley Mach reflection. The presence of the expansion fans at the triple points resolves the paradox. We describe some recent experimental evidence which is consistent with these numerical findings.

  14. Richard von Volkmann: surgeon and Renaissance man.

    PubMed

    Willy, Christian; Schneider, Peter; Engelhardt, Michael; Hargens, Alan R; Mubarak, Scott J

    2008-02-01

    Richard von Volkmann (1830-1889), one of the most important surgeons of the 19(th) century, is regarded as one of the fathers of orthopaedic surgery. He was a contemporary of Langenbeck, Esmarch, Lister, Billroth, Kocher, and Trendelenburg. He was head of the Department of Surgery at the University of Halle, Germany (1867-1889). His popularity attracted doctors and patients from all over the world. He was the lead physician for the German military during two wars. From this experience, he compared the mortality of civilian and war injuries and investigated the general poor hygienic conditions in civilian hospitals. This led him to introduce the "antiseptic technique" to Germany that was developed by Lister. His powers of observation and creativity led him to findings and achievements that to this day bear his name: Volkmann's contracture and the Hueter-Volkmann law. Additionally, he was a gifted writer; he published not only scientific literature but also books of children's fairy tales and poems under the pen name of Richard Leander, assuring him a permanent place in the world of literature as well as orthopaedics.

  15. Richard von Volkmann: surgeon and Renaissance man.

    PubMed

    Willy, Christian; Schneider, Peter; Engelhardt, Michael; Hargens, Alan R; Mubarak, Scott J

    2008-02-01

    Richard von Volkmann (1830-1889), one of the most important surgeons of the 19(th) century, is regarded as one of the fathers of orthopaedic surgery. He was a contemporary of Langenbeck, Esmarch, Lister, Billroth, Kocher, and Trendelenburg. He was head of the Department of Surgery at the University of Halle, Germany (1867-1889). His popularity attracted doctors and patients from all over the world. He was the lead physician for the German military during two wars. From this experience, he compared the mortality of civilian and war injuries and investigated the general poor hygienic conditions in civilian hospitals. This led him to introduce the "antiseptic technique" to Germany that was developed by Lister. His powers of observation and creativity led him to findings and achievements that to this day bear his name: Volkmann's contracture and the Hueter-Volkmann law. Additionally, he was a gifted writer; he published not only scientific literature but also books of children's fairy tales and poems under the pen name of Richard Leander, assuring him a permanent place in the world of literature as well as orthopaedics. PMID:18196438

  16. Exponential Size Distribution of von Willebrand Factor

    PubMed Central

    Lippok, Svenja; Obser, Tobias; Müller, Jochen P.; Stierle, Valentin K.; Benoit, Martin; Budde, Ulrich; Schneppenheim, Reinhard; Rädler, Joachim O.

    2013-01-01

    Von Willebrand Factor (VWF) is a multimeric protein crucial for hemostasis. Under shear flow, it acts as a mechanosensor responding with a size-dependent globule-stretch transition to increasing shear rates. Here, we quantify for the first time, to our knowledge, the size distribution of recombinant VWF and VWF-eGFP using a multilateral approach that involves quantitative gel analysis, fluorescence correlation spectroscopy, and total internal reflection fluorescence microscopy. We find an exponentially decaying size distribution of multimers for recombinant VWF as well as for VWF derived from blood samples in accordance with the notion of a step-growth polymerization process during VWF biosynthesis. The distribution is solely described by the extent of polymerization, which was found to be reduced in the case of the pathologically relevant mutant VWF-IIC. The VWF-specific protease ADAMTS13 systematically shifts the VWF size distribution toward smaller sizes. This dynamic evolution is monitored using fluorescence correlation spectroscopy and compared to a computer simulation of a random cleavage process relating ADAMTS13 concentration to the degree of VWF breakdown. Quantitative assessment of VWF size distribution in terms of an exponential might prove to be useful both as a valuable biophysical characterization and as a possible disease indicator for clinical applications. PMID:24010664

  17. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Development of Surface Engineered Coating Systems for Aluminum Pressure Die Casting Dies: Towards a 'Smart' Die Coating

    SciTech Connect

    Dr. John J. Moore; Dr. Jianliang Lin,

    2012-07-31

    The main objective of this research program was to design and develop an optimal coating system that extends die life by minimizing premature die failure. In high-pressure aluminum die-casting, the die, core pins and inserts must withstand severe processing conditions. Many of the dies and tools in the industry are being coated to improve wear-resistance and decrease down-time for maintenance. However, thermal fatigue in metal itself can still be a major problem, especially since it often leads to catastrophic failure (i.e. die breakage) as opposed to a wear-based failure (parts begin to go out of tolerance). Tooling costs remain the largest portion of production costs for many of these parts, so the ability prevent catastrophic failures would be transformative for the manufacturing industry.The technology offers energy savings through reduced energy use in the die casting process from several factors, including increased life of the tools and dies, reuse of the dies and die components, reduction/elimination of lubricants, and reduced machine down time, and reduction of Al solder sticking on the die. The use of the optimized die coating system will also reduce environmental wastes and scrap parts. Current (2012) annual energy saving estimates, based on initial dissemination to the casting industry in 2010 and market penetration of 80% by 2020, is 3.1 trillion BTU's/year. The average annual estimate of CO2 reduction per year through 2020 is 0.63 Million Metric Tons of Carbon Equivalent (MM TCE).

  18. Accurate Die Design for Automotive Panel Stamping Considering the Compensation Related with Die Deflection and Blank Thinning

    NASA Astrophysics Data System (ADS)

    Chen, Jun; Xu, Dongkai; Xia, Guodong; Li, Xifeng; Chen, Jieshi; Zhang, Jian; Yan, Wei; Li, Yue

    2011-08-01

    In order to improve assembly accuracy, automotive body panels have to be fabricated with higher dimensional and surface quality requirements, therefore the die faces should be designed more accurately to consider more relevant factors. In the presented study, we proposed algorithms to realize the following functions: through forming process simulation, the thinning distribution on the deformed blank was extracted as first kind of compensation; through die structural CAE analysis which automatically mapped the boundary contact forces onto the die surfaces from process simulation results, the die deflection was calculated as second kind of compensation. These two quantitative contributions were added together to compensate the die face. The proposed methodologies were programmed and integrated with LS-Dyna and HyperWorks, and also integrated with Autoform and CATIA linear CAE functionalities separately. In addition, a software toolkit to calculate the contacting ratio was also developed to evaluate the effectiveness of die face compensation. The second toolkit developed was verified by an automotive structural part forming die design, through die compensation and geometric optimization, the predicted contact ratio between the die face and formed blank was improved a lot, and the first toolkit was testified by a fender drawing die design. It shows that the die face compensation can be realized and integrated seamlessly between CAD model, process simulation model and die structural CAE model with the help of data I/O tools developed by the authors.

  19. Blogging medical students: a qualitative analysis.

    PubMed

    Pinilla, Severin; Weckbach, Ludwig T; Alig, Stefan K; Bauer, Helen; Noerenberg, Daniel; Singer, Katharina; Tiedt, Steffen

    2013-01-01

    Einleitung: Bloggen ist eine unter Medizinstudierenden zunehmend verbreitete Methode, Erfahrungen über das Internet mit einer weltweiten „Learning Community“ auszutauschen. Trotz intensiver Recherche sind den Autoren keine Studien bekannt, in denen spezifisch Blogs von Medizinstudierenden qualitativ analysiert wurden. Im Folgenden werden Kategorien und Themen aus diesen Blogeinträgen beschrieben und ihre medizindidaktische Bedeutung für Medizinstudierende und Lehrende diskutiert.Methoden: In der vorliegenden qualitativen Studie wurden ursprünglich 75 von Medizinstudierenden verfasste Blogs identifiziert. 33 Blogs mit insgesamt 1228 englischen und 337 deutschen Einträgen erfüllten die Einschlusskriterien und wurden analysiert. Mit Hilfe einer komparativen Analysemethode wurden die Blogeinträge zunächst Zeile für Zeile und anschließend fokussiert kodiert. Die emergierenden Themen und Unterthemen wurden in übergeordneten Kategorien zusammengefasst.Ergebnisse: Medizinstudierende verwenden Blogs, um über eine große Vielfalt an Erfahrungen während des Medizinstudiums zu berichten und diese zu reflektieren. Vorbereitung auf schriftliche und mündliche Examina, Erfahrungen während klinischer Praktika, der Umgang mit belastenden Situationen während des Studiums und das Sozialleben jenseits des Studiums waren Hauptthemen.Schlussfolgerung: Unsere Ergebnisse weisen darauf hin, dass Blogs für Medizinstudierende möglicherweise hilfreich sind, um Erfahrungen zu reflektieren. Zusätzlich können Lehrende auf diesem Weg wertvolle Einblicke in die studentische Wahrnehmung der medizinischen Ausbildung erhalten.Die Bedeutung von Blogs in der medizinischen Ausbildung könnte durch gezieltes Kommentieren von Blogeinträgen durch Lehrende erhöht werden. Von diesem Dialog könnte auch eine örtlich unabhängige „Learning Community“ profitieren.

  20. Sheet metal stamping die design for warm forming

    DOEpatents

    Ghosh, Amit K.

    2003-04-22

    In metal stamping dies, by taking advantage of improved material flow by selectively warming the die, flat sections of the die can contribute to the flow of material throughout the workpiece. Local surface heating can be accomplished by placing a heating block in the die. Distribution of heating at the flat lower train central regions outside of the bend region allows a softer flow at a lower stress to enable material flow into the thinner, higher strain areas at the bend/s. The heating block is inserted into the die and is powered by a power supply.

  1. Diagnostic Value of Measuring Platelet Von Willebrand Factor in Von Willebrand Disease

    PubMed Central

    Casonato, Alessandra; Cattini, Maria Grazia; Daidone, Viviana; Pontara, Elena; Bertomoro, Antonella; Prandoni, Paolo

    2016-01-01

    Von Willebrand disease (VWD) may be caused by an impaired von Willebrand factor (VWF) synthesis, its increased clearance or abnormal function, or combinations of these factors. It may be difficult to recognize the different contributions of these anomalies. Here we demonstrate that VWD diagnostics gains from measuring platelet VWF, which can reveal a defective VWF synthesis. Measuring platelet VWF revealed that: severe type 1 VWD always coincided with significantly lower platelet and plasma VWF levels, whereas mild forms revealed low plasma VWF levels associated with low or normal platelet VWF levels, and the latter were associated with a slightly shorter VWF survival; type Vicenza (the archetype VWD caused by a reduced VWF survival) featured normal platelet VWF levels despite significantly reduced plasma VWF levels; type 2B patients could have either normal platelet VWF levels associated with abnormal multimer patterns, or reduced platelet VWF levels associated with normal multimer patterns; type 2A patients could have reduced or normal platelet VWF levels, the former associated mainly with type 2A-I, the latter with type 2A-II; plasma and platelet VWF levels were normal in type 2N, except when the defect was associated with a quantitative VWF mutation. Our findings show that measuring platelet VWF helps to characterize VWD, especially the ambiguous phenotypes, shedding light on the mechanisms underlying the disorder. PMID:27532107

  2. Characterization of aberrant splicing of von Willebrand factor in von Willebrand disease: an underrecognized mechanism.

    PubMed

    Hawke, Lindsey; Bowman, Mackenzie L; Poon, Man-Chiu; Scully, Mary-Frances; Rivard, Georges-Etienne; James, Paula D

    2016-07-28

    Approximately 10% of von Willebrand factor (VWF) gene mutations are thought to alter messenger RNA (mRNA) splicing through disruption of consensus splice sites. This mechanism is likely underrecognized and affected by mutations outside consensus splice sites. During VWF synthesis, splicing abnormalities lead to qualitative defects or quantitative deficiencies in VWF. This study investigated the pathologic mechanism acting in 3 von Willebrand disease (VWD) families with putative splicing mutations using patient-derived blood outgrowth endothelial cells (BOECs) and a heterologous human embryonic kidney (HEK 293(T)) cell model. The exonic mutation c.3538G>A causes 3 in-frame splicing variants (23del, 26del, and 23/26del) which cannot bind platelets, blood coagulation factor VIII, or collagen, causing VWD through dominant-negative intracellular retention of coexpressed wild-type (WT) VWF, and increased trafficking to lysosomes. Individuals heterozygous for the c.5842+1G>C mutation produce exon 33 skipping, exons 33-34 skipping, and WT VWF transcripts. Pathogenic intracellular retention of VWF lacking exons 33-34 causes their VWD. The branch site mutation c.6599-20A>T causes type 1 VWD through mRNA degradation of exon 38 skipping transcripts. Splicing ratios of aberrant transcripts and coexpressed WT were altered in the BOECs with exposure to shear stress. This study provides evidence of mutations outside consensus splice sites disrupting splicing and introduces the concept that VWF splicing is affected by shear stress on endothelial cells. PMID:27317792

  3. Lebensmittelzusatzstoffe

    NASA Astrophysics Data System (ADS)

    von Rymon Lipinski, Gert-Wolfhard; Lück, Erich

    Bis etwa zum 18. Jahrhundert war die Zahl der verwendeten Zusatzstoffe gering. Sie beschränkte sich auf Salz, Räucherrauch, Essig, Gewürze, Zucker, Hefe und schweflige Säure. Eine Wende zeichnete sich mit dem Beginn der Industrialisierung ab. Die Menschen wohnten mehr und mehr in Städten, wo es nicht mehr möglich ist, in größerem Umfang selbst Nahrungsmittel anzubauen oder zu gewinnen. Die fabrikmäßige Herstellung von haltbaren Lebensmitteln machte den verstärkten Gebrauch von Zusatzstoffen notwendig. Einige der im 19. Jahrhundert aufgekommenen Zusatzstoffe haben bis heute ihre Bedeutung behalten, z. B. Backpulver, Benzoesäure und Saccharin. Andere verschwanden bald wieder vom Markt,weil sie den steigenden Ansprüchen an gesundheitliche Unbedenklichkeit und geschmackliche Neutralität nicht Stand halten konnten.

  4. Locally Compact Quantum Groups. A von Neumann Algebra Approach

    NASA Astrophysics Data System (ADS)

    Van Daele, Alfons

    2014-08-01

    In this paper, we give an alternative approach to the theory of locally compact quantum groups, as developed by Kustermans and Vaes. We start with a von Neumann algebra and a comultiplication on this von Neumann algebra. We assume that there exist faithful left and right Haar weights. Then we develop the theory within this von Neumann algebra setting. In [Math. Scand. 92 (2003), 68-92] locally compact quantum groups are also studied in the von Neumann algebraic context. This approach is independent of the original C^*-algebraic approach in the sense that the earlier results are not used. However, this paper is not really independent because for many proofs, the reader is referred to the original paper where the C^*-version is developed. In this paper, we give a completely self-contained approach. Moreover, at various points, we do things differently. We have a different treatment of the antipode. It is similar to the original treatment in [Ann. Sci. & #201;cole Norm. Sup. (4) 33 (2000), 837-934]. But together with the fact that we work in the von Neumann algebra framework, it allows us to use an idea from [Rev. Roumaine Math. Pures Appl. 21 (1976), 1411-1449] to obtain the uniqueness of the Haar weights in an early stage. We take advantage of this fact when deriving the other main results in the theory. We also give a slightly different approach to duality. Finally, we collect, in a systematic way, several important formulas. In an appendix, we indicate very briefly how the C^*-approach and the von Neumann algebra approach eventually yield the same objects. The passage from the von Neumann algebra setting to the C^*-algebra setting is more or less standard. For the other direction, we use a new method. It is based on the observation that the Haar weights on the C^*-algebra extend to weights on the double dual with central support and that all these supports are the same. Of course, we get the von Neumann algebra by cutting down the double dual with this unique

  5. ["Good dying"--definition and current state of research].

    PubMed

    Hutter, Nico; Stößel, Ulrich; Meffert, Cornelia; Körner, Mirjam; Bozzaro, Claudia; Becker, Gerhild; Baumeister, Harald

    2015-08-01

    The advances of modern medicine did not only result in prolongation of life expectancy, but also led to a shift from dying at home to dying in public institutions. In western countries most people die at advanced age in medical facilities. Hence, the question regarding the conditions, which should be provided by society and especially medicine, to allow terminally ill people to experience "good dying" is substantial. For this purpose, an examination of patients', family members' and health care providers' understanding of the term " good dying" is required. The present paper aims at shedding light on the term "good dying" and to summarize the current state of research. Therefore, the attributes of "good dying" will be described from the perspectives of patients, family members and health care providers, which are discussed and examined in current medical-sociological research. These attributes can be illustrated on three dimensions: Quality of life at the end of life (e. g. pain relief, mental well-being), quality of dying (e. g. avoiding prolonged dying, autonomy, presence of relatives) and quality of health care at the end of life (e. g. patient-oriented health care, positive communication between health care providers and patients, availability of guidelines). Although the attributes of "good dying" are described in detail in the existing literature, further studies have to clarify the relevance and impact of these attributes as predictors of "good dying". PMID:26306020

  6. Euthanasia, assisted dying and the right to die in Ghana: a socio-legal analysis.

    PubMed

    Owusu-Dapaa, Ernest

    2013-12-01

    There is unanimity among states to protect the continuation of life of the individual as a safeguard against their collective extinction. The right to life is accordingly guaranteed but its antithesis, the right to die is the subject of an unending debate. The controversy over the right to die is deepened by rapid advances in medicine, creating the capability for prolongation of life beyond the span which one's natural strength can endure. Ghana's supreme law explicitly guarantees the right to life but remains ambiguous on right to die, particularly euthanasia and assisted dying. Thus, some of the other rights, such as the right to dignity and not to be tortured, can creatively be exploited to justify some instances of euthanasia. Ghana's criminal code largely proscribes euthanasia. Notwithstanding, proscription of euthanasia and assisted dying by the law, in Ghana's empirical work undertaken in some of the communities in Ghana, suggests that euthanasia is quietly practisedin health facilities and private homes, especially in the rural areas. Contrary to the popular reasons assigned in the literature of the Western world, with respect to the practice or quest for legalization of euthanasia as being a necessity for providing relief from pain or hopeless quality of life, empirical data from social and anthropological studies conducted in Ghana reveal that poverty is the motivation for informal euthanasia practice in Ghana rather than genuine desire on part of patients to die or their relatives to see to their accelerated death. Apart from poverty, traditional cultural values of African societies consider non-natural death as a taboo and ignominy to the victim and his family. Thus, any move by the government to legalize euthanasia will need to be informed by widely held consultations and a possible referendum; otherwise the law may be just a mere transplant of Western models of legislation on euthanasia without reflecting the ethos of the African people.

  7. Simulation of Stamping Process of Automotive Panel Considering Die Deformation

    SciTech Connect

    Keum, Y.T.; Ahn, I.H.; Lee, I.K.; Song, M.H.; Kwon, S.O.; Park, J.S.

    2005-08-05

    In order to see the effect of die deformation on the forming of sheet metals, the draw-ins, strains, and spring-backs of an automotive fender panels are numerically simulated considering the die deformation, which is found by the simultaneous structural analysis of press and dies. By coupling the forming analysis and the structural analysis, the die deformation is simultaneously taken into account in the forming process. Furthermore, for the consideration of load difference transferred among the upper die, punch, and blank holder due to the changes in sheet thickness, the gap elements are employed instead of the blank sheet in the structural analysis. The numerical simulation results of an automotive fender draw panel are compared with the measurements. The comparison of the forming and spring-back analysis results between the rigid die and the deformed die shows that the deformed tool provides more accurate forming and spring-back prediction.

  8. DIE Deflection Modeling: Empirical Validation and Tech Transfer

    SciTech Connect

    R. Allen Miller

    2003-05-28

    This report summarizes computer modeling work that was designed to help understand how the die casting die and machine contribute to parting plane separation during operation. Techniques developed in earlier research (8) were applied to complete a large computational experiment that systematically explored the relationship between the stiffness of the machine platens and key dimensional and structural variables (platen area covered, die thickness, platen thickness, thickness of insert and the location of the die with respect to the platen) describing the die/machine system. The results consistently show that there are many significant interactions among the variables and it is the interactions, more than the individual variables themselves, which determine the performance of the machine/die system. That said, the results consistently show that it is the stiffness of the machine platens that has the largest single impact on die separation.

  9. Simulation of Stamping Process of Automotive Panel Considering Die Deformation

    NASA Astrophysics Data System (ADS)

    Keum, Y. T.; Ahn, I. H.; Lee, I. K.; Song, M. H.; Kwon, S. O.; Park, J. S.

    2005-08-01

    In order to see the effect of die deformation on the forming of sheet metals, the draw-ins, strains, and spring-backs of an automotive fender panels are numerically simulated considering the die deformation, which is found by the simultaneous structural analysis of press and dies. By coupling the forming analysis and the structural analysis, the die deformation is simultaneously taken into account in the forming process. Furthermore, for the consideration of load difference transferred among the upper die, punch, and blank holder due to the changes in sheet thickness, the gap elements are employed instead of the blank sheet in the structural analysis. The numerical simulation results of an automotive fender draw panel are compared with the measurements. The comparison of the forming and spring-back analysis results between the rigid die and the deformed die shows that the deformed tool provides more accurate forming and spring-back prediction.

  10. Biographical sketch: Georg Hermann von Meyer (1815-1892).

    PubMed

    Skedros, John G; Brand, Richard A

    2011-11-01

    This biographical sketch on Georg Hermann von Meyer highlights the interactions in the 1860s that von Meyer, a famous anatomist, had with Karl Culmann, a famous structural engineer and mathematician. The published papers from this interaction caught the attention of Julius Wolff and stimulated his development of the trajectorial hypothesis of bone adaptation--now called "Wolff's Law." The corresponding translations are provided: (1) von Meyer's 1867 paper that highlights the regularity of arched trabecular patterns in various human bones, and his discussions with Culmann about their possible mechanical relevance; and (2) Wolff's 1869 paper that first mentions the correspondence of stress trajectories in a solid, crane-like structure to the arched trabecular patterns in the proximal human femur. This biographical sketch on Georg Hermann von Meyer corresponds to the historic texts, The Classic: The Architecture of the Trabecular bone (by von Meyer), and The Classic: On the Significance of the Architecture of the Spongy Substance for the Question of Bone Growth. A preliminary publication (by Wolff) available at DOIs 10.1007/s11999-011-2041-5 , 10.1007/s11999-011-2042-4 . PMID:21901583

  11. Dying cancer patients talk about euthanasia.

    PubMed

    Eliott, Jaklin A; Olver, Ian N

    2008-08-01

    Within developed nations, there is increasing public debate about and apparent endorsement of the appropriateness of euthanasia as an autonomous choice to die in the face of intolerable suffering. Surveys report socio-demographic differences in rates of acceptance of euthanasia, but there is little in-depth analysis of how euthanasia is understood and positioned within the social and moral lives of individuals, particularly those who might be considered suitable candidates-for example, terminally-ill cancer patients. During discussions with 28 such patients in Australia regarding medical decisions at the end of life, euthanasia was raised by 13 patients, with the others specifically asked about it. Twenty-four patients spoke positively of euthanasia, 19 of these voicing some concerns. None identified euthanasia as a currently favoured option. Four were completely against it. Endorsement for euthanasia was in the context of a hypothetical future or for a hypothetical other person, or temporally associated with acute pain. Arguments supporting euthanasia framed the issue as a matter of freedom of choice, as preserving dignity in death, and as curbing intolerable pain and suffering, both of the patient and of those around them. A common analogy featured was that of euthanising a dog. These arguments were typically presented as self-evident justification for euthanasia, construed as an appropriate choice to die, with opposers positioned as morally inferior or ignorant. The difficulties of ensuring 'choice' and the moral connotations of 'choosing to die,' however, worked to problematise the appropriateness of euthanising specific individuals. We recommend further empirical investigation of the moral and social meanings associated with euthanasia.

  12. Zur Elektronenstruktur hochsymmetrischer Verbindungen der f-Elemente 28. Experimentelle Erfassung und Simulation des Kristallfeld-Aufspaltungsmusters von Tris(bis(trimethylsilyl)amido)neodym(III) [Nd(Btmsa)3

    NASA Astrophysics Data System (ADS)

    Amberger, Von H.-D.; Jank, S.; Reddmann Und, H.; Edelstein, N. M.

    Die sigma- und pi-Absorptionsspektren eines orientierten Nd(Btmsa)3-Einkristalls wurden bei Raumtemperatur sowie bei tiefen Temperaturen vermessen. Auf der Basis der beobachteten Spektren wurde das zugrundeliegende partielle Kristallfeld (KF)-Aufspaltungsmuster abgeleitet und durch Anpassung der offenen Operators simuliert. Bei 84 Zuordnungen wurde eine RMS-Abweichung von 35.2cm erzielt. Auf der Grundlage der erhaltenen Wellenfunktionen des KF-Grundzustandes konnte das bei 5K aufgenommene ESR-Spektrum von gelostem Nd(Btmsa)3 erklart werden. Unter Verwendung der berechneten Wellenfunktionen und Eigenwerte sowie eines Orbitalreduktions 2faktors k = 0.975konnte die hangigkeit von eff einer gepulverten Nd(Btmsa)3-Probe reproduziert werden. The sigma and pi absorption spectra of an oriented single crystal of Nd(btmsa)3 were measured at room and low temperatures. From the spectra obtained a truncated crystal field (CF) splitting pattern is derived, and simulated by fitting the fr-e1 e parameters of an empirical Hamiltonian. For 84 assignments an RMS deviation of 35.2cm tions of the CF ground state obtained from these calculations the 5K EPR spectrum of dissolved Nd(btmsa)3 could be explained. Making use of the calculated wav 2efunctions and eigenvalues the experimentally determined temperature dependence of eff of powdered Nd(btmsa)3 could be reproduced by adopting an orbital reduction factor k = 0.975. Parameter eines empirischen H-a 1miltonexperimentell bestimmte Temperaturabis achieved. On the basis of the wavefuncplexe

  13. When a partner dies: lesbian widows.

    PubMed

    Bent, Katherine N; Magilvy, J Kathy

    2006-06-01

    Death of a life partner and the subsequent bereavement are profound experiences for an individual. By far, the majority of bereavement research reported is focused on heterosexual couples, primarily married and often in the later years of life. The purpose of this study was to describe the bereavement experiences of lesbians whose life partners have died. The study used a descriptive, qualitative design informed by feminist scholarship and phenomenology to access the depth of personal experiences, as well as internally interpreted meanings of those experiences, among lesbian widows. PMID:16613798

  14. Palliative Care and legislation around dying.

    PubMed

    Baroness Finlay of Llandaff; Lancaster, Harriet

    2015-01-01

    Around the world forty million people a year need palliative care yet more than four in five of these have no access to basic analgesia with morphine. 6% of those dying with no pain relief are children. Those left behind carry with them the memory of the death and it can colour their future lives, making good palliative care an urgent public health issue around the world. Everyone providing healthcare needs core training in palliative care, including the fundamentals of pain and symptom relief. Governments must urgently address barriers to morphine availability and educators of health care professionals must eliminate myths and phobias, and teach good end of life care. PMID:26867342

  15. [The issue of death and dying].

    PubMed

    de Araújo, Paula Vanêssa Rodrigues; Vieira, Maria Jésia

    2004-01-01

    This study brings about a reflection on death and dying, commented as if they had the same meaning. Nowadays, one talks about death as seldom as possible and, by its negation, there appeared the negation of diseases, thus causing the diseased people to become totally dependant on health teams. Technological and scientific advances led to postponing death, and it is possible to temporarily extend what humans decided to call life. This has become the great piece of criticism by scholars that seek to lead death again to its place by trying to bring it again into the center of reflections, analyses and discussions within the most diverse areas.

  16. Models of physician-assisted dying.

    PubMed

    Girsh, F

    1996-12-01

    Repeated surveys have shown that more than 70% of Americans support physician aid in dying for terminally ill mentally competent adults. Recent polls of physicians in Oregon and Michigan demonstrate majority support of those doctors for such a law while 25% of physicians surveyed in Washington admitted to already providing help. Models of how that would work have been spelled out in proposed legislation in the United States since 1988, other models come from the Northern Territory in Australia, from Holland, and from Jack Kevorkian's writing and actions as well as from other writers such as Dr Timothy Quill. PMID:9009461

  17. Ernährungswissenschaften

    NASA Astrophysics Data System (ADS)

    Bitsch, Irmgard; Bitsch, Roland

    Seit etlichen Jahren sind Grundlagen und Teilbereiche des Faches "Ernährungswissenschaften" in die Studienordnungen für Lebensmittelchemiker und -technologen aufgenommen worden. Hierzu hat man sich unter anderem deshalb entschlossen, weil ernährungsbezogene Aussagen im Verkehr mit Lebensmitteln und bei deren Beurteilung eine immer größere Bedeutung für die genannten Berufsgruppen gewinnen. Darüber hinaus liegen inzwischen immer mehr Erkenntnisse vor, wonach die Ernährungsweise einen wichtigen und gleichzeitig weitgehend vermeidbaren Risikofaktor für die Mortalität an chronischen Erkrankungen darstellt. Dies gilt z. B. für die häufigsten Todesursachen in Deutschland, die Herz-Kreislauferkrankungen und die bösartigen Tumore (Ernährungsbericht 2004). Im Folgenden wird daher ein kurzer Überblick über einige zentrale Aspekte dieser komplexen und zukunftsträchtigen Disziplin gegeben. Ziel dieser Fachrichtung, deren Wurzeln in Medizin, Natur- und Agrarwissenschaften liegen, ist die Erforschung von Nutzen und Risiken, die sich für den Menschen durch die von ihm praktizierte Ernährungsweise ergeben.

  18. Evaluation der zentralen TUM-Lernplattform

    NASA Astrophysics Data System (ADS)

    Schulze, Elvira; Baume, Matthias; Graf, Stephan; Gergintchev, Ivan

    Die Notwendigkeit der Qualitätssicherung und -kontrolle für innovative universitäre Lehr-/Lernszenarien ist in der Praxis unbestritten. Die Wirksamkeit der Einführung der zentralen Lernplattform CLIX Campus der imc AG an der TUM wurde mittels quantitativer und qualitativer Evaluation überprüft. Als statistische Bewertungsgrundlage wurde der Erreichungsgrad bestimmter Projektziele herangezogen. Aufbauend auf den theoretischen Grundlagen der Evaluation von Bildungsangeboten gibt diese Studie Aufschluss über die Ergebnisse der Datenerhebungen sowie die Einschätzung der Plattform aus Nutzersicht und belegt die wesentliche Bedeutung der durchgängigen IT-Infrastruktur und speziell der einheitlichen Verfügbarkeit der eLearning Angebote.

  19. Gunther von Hagens' BODY WORLDS: selling beautiful education.

    PubMed

    Burns, Lawrence

    2007-04-01

    In the BODY WORLDS exhibitions currently touring the United States, Gunther von Hagens displays human cadavers preserved through plastination. Whole bodies are playfully posed and exposed to educate the public. However, the educational aims are ambiguous, and some aspects of the exhibit violate human dignity. In particular, the signature cards attached to the whole-body plastinates that bear the title, the signature of Gunther von Hagens, and the date of creation mark the plastinates as artwork and von Hagens as the artist in a gesture that strips the personal dignity from the donors. I conclude that the educational use of cadavers is compatible with respect for dignity if: 1) the utility of such use is great enough; 2) there are no other ways of achieving these ends; and 3) every effort is made to honor the dignity of the donors.

  20. Asymptotic structure of free product von Neumann algebras

    NASA Astrophysics Data System (ADS)

    Houdayer, Cyril; Ueda, Yoshimichi

    2016-11-01

    Let $(M, \\varphi) = (M_1, \\varphi_1) \\ast (M_2, \\varphi_2)$ be the free product of any $\\sigma$-finite von Neumann algebras endowed with any faithful normal states. We show that whenever $Q \\subset M$ is a von Neumann subalgebra with separable predual such that both $Q$ and $Q \\cap M_1$ are the ranges of faithful normal conditional expectations and such that both the intersection $Q \\cap M_1$ and the central sequence algebra $Q' \\cap M^\\omega$ are diffuse (e.g. $Q$ is amenable), then $Q$ must sit inside $M_1$. This result generalizes the previous results of the first named author in [Ho14] and moreover completely settles the questions of maximal amenability and maximal property Gamma of the inclusion $M_1 \\subset M$ in arbitrary free product von Neumann algebras.

  1. Die-target for dynamic powder consolidation

    DOEpatents

    Flinn, J.E.; Korth, G.E.

    1985-06-27

    A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block. 4 figs.

  2. Die-target for dynamic powder consolidation

    DOEpatents

    Flinn, John E.; Korth, Gary E.

    1986-01-01

    A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block.

  3. Dying, mourning, and spirituality: a psychological perspective.

    PubMed

    Marrone, R

    1999-09-01

    Based in an unfortunate tradition that stretches back in time to Watson's behaviorism and Freud's psychoanalysis, psychology has tended to reject and to pathologize matters of the spirit. In the past 30 years, however, with the advent of what has been termed the cognitive revolution, psychology has greatly expanded the scope of its subject matter. Psychologists and thanatologists have begun to unravel the cognitive underpinnings of our assumptive world and the transformation of those underpinnings in times of crisis and stress. This article examines the cognitive basis of the spiritual experience and the use of cognitive assimilation, accommodation strategies during the process of mourning the death of a loved one, as well as during the process of living our own dying. Of special importance to mental health professionals and clergy, new research on dying, mourning, and spirituality suggests that the specific ways in which people rediscover meaning--such as belief in traditional religious doctrine, the afterlife, reincarnation, philanthropy, or a spiritual order to the universe--may be less important than the process itself. In other words, in the midst of dealing with profound loss in our lives, the ability to reascribe meaning to a changed world through spiritual transformation, religious conversion, or existential change may be more significant than the specific content by which that need is filled.

  4. Die casting die deflections: Prediction and attenuation. Final report, July 1, 1995--September 30, 1997

    SciTech Connect

    Miller, R.Allen; Ahuett-Garza, Horacio; Choudhury, Aswin K.; Dedhia, Sanjay

    1998-05-01

    The objective of this work was to develop and test die casting design evaluation techniques based on the visualization of geometric data that is related to potential defects or problems. Specifically, thickness information is used to provide insight into potential thermal problems in the part and die. Distance from the gate and a special type of animation of the fill pattern is used to provide an assessment of gate, vent and overflow locations. Techniques have been developed to convert part design information in the form of STL files to a volume-based representation called a voxel model. The use of STL files makes the process CAD system independent. Once in voxel form, methods that were developed in this work are used to identify thick regions in the part, thin regions in the part and/or die, distance from user specified entry locations (gates), and the qualitative depiction of the fill pattern. The methods were tested with a prototype implementation on the UNIX platform. The results of comparisons with numerical simulation and field reported defects were surprisingly good. The fill-related methods were also compared against short-shots and a water analog study using high speed video. The report contains the results of the testing plus detailed background material on the construction of voxel models, the methods used for displaying results, and the computational geometric reasoning methods used to create die casting-related information from the voxel model for display to the user.

  5. The smooth entropy formalism for von Neumann algebras

    NASA Astrophysics Data System (ADS)

    Berta, Mario; Furrer, Fabian; Scholz, Volkher B.

    2016-01-01

    We discuss information-theoretic concepts on infinite-dimensional quantum systems. In particular, we lift the smooth entropy formalism as introduced by Renner and collaborators for finite-dimensional systems to von Neumann algebras. For the smooth conditional min- and max-entropy, we recover similar characterizing properties and information-theoretic operational interpretations as in the finite-dimensional case. We generalize the entropic uncertainty relation with quantum side information of Tomamichel and Renner and discuss applications to quantum cryptography. In particular, we prove the possibility to perform privacy amplification and classical data compression with quantum side information modeled by a von Neumann algebra.

  6. Henry Cavendish, Johann von Soldner, and the deflection of light

    NASA Astrophysics Data System (ADS)

    Will, Clifford M.

    1988-05-01

    The gravitational deflection of light based on Newtonian theory and the corpuscular model of light was calculated, but never published, around 1784 by Henry Cavendish, almost 20 years earlier than the first published calculation by Johann Georg von Soldner. The two results are slightly different because, while Cavendish treated a light ray emitted from infinity, von Soldner treated a light ray emitted from the surface of the gravitating body. At the first order of approximation, they agree with each other; both are one-half the value predicted by general relativity and confirmed by experiment.

  7. An Accurate von Neumann's Law for Three-Dimensional Foams

    SciTech Connect

    Hilgenfeldt, Sascha; Kraynik, Andrew M.; Koehler, Stephan A.; Stone, Howard A.

    2001-03-19

    The diffusive coarsening of 2D soap froths is governed by von Neumann's law. A statistical version of this law for dry 3D foams has long been conjectured. A new derivation, based on a theorem by Minkowski, yields an explicit analytical von Neumann's law in 3D which is in very good agreement with detailed simulations and experiments. The average growth rate of a bubble with F faces is shown to be proportional to F{sup 1/2} for large F , in contrast to the conjectured linear dependence. Accounting for foam disorder in the model further improves the agreement with data.

  8. National Metal Casting Research Institute final report. Volume 2, Die casting research

    SciTech Connect

    Jensen, D.

    1994-06-01

    Four subprojects were completed: development and evaluation of die coatings, accelerated die life characterization of die materials, evaluation of fluid flow and solidification modeling programs, selection and characterization of Al-based die casting alloys, and influence of die materials and coatings on die casting quality.

  9. [Quality of life and health - individual perspectives of nursing home residents who were able to answer questions - a qualitative research].

    PubMed

    Behr, Anja; Meyer, Roger; Holzhausen, Martin; Kuhlmey, Adelheid; Schenk, Liane

    2014-12-01

    Hintergrund: Ein Ziel von Forschung und Pflegepraxis ist die Aufrechterhaltung der Lebensqualität von Bewohner(inne)n stationärer Langzeitpflegeeinrichtungen. Gesundheit, als ein wichtiger Teilbereich von Lebensqualität, gewinnt mit steigendem Alter an Bedeutung. Ziel: Die vorliegende Arbeit verfolgt das Ziel, die Aspekte «Intakte geistige Fähigkeiten» und «Mobil sein» eingehender zu analysieren. Methode: Es wurden neun Männer und 33 Frauen aus acht verschiedenen Pflegeheimen in Berlin und Umland mittels narrativer Leitfadeninterviews befragt. Die selbstauskunftsfähigen Interviewpartner waren im direkten Gespräch durch die Interviewer gewonnen worden. Die Auswertung der Interviews erfolgte in Anlehnung an die dokumentarische Methode nach Bohnsack. Ergebnisse: Für die Befragten ist es wichtig, bis ins hohe Alter geistig leistungsfähig zu sein, um selbstbestimmt handeln, und eigenständig das Leben kontrollieren zu können. Als problematisch sehen die Befragten nicht nur den Verlust eigener, sondern auch den Verlust der kognitiven Fähigkeiten von Mitbewohnern an. Als eine weitere zentrale Komponente von Gesundheit wird die Fähigkeit des «Laufen Könnens» erachtet, um Selbstbestimmung zu wahren und an den Aktivitäten des (Heim-)Lebens teilzuhaben. Schlussfolgerungen: Pflegeheimbewohner(innen) sollten eine gezielte und individuelle Förderung kognitiver Fähigkeiten erhalten. Interessierte Bewohner(innen) sollten verstärkt Informationen zum Krankheitsbild der Demenz erhalten. Alltagsnahe Bewegungsangebote können zum Erhalt der Mobilität beitragen.

  10. Thermal Hotspots in CPU Die and It's Future Architecture

    NASA Astrophysics Data System (ADS)

    Wang, Jian; Hu, Fu-Yuan

    Owing to the increasing core frequency and chip integration and the limited die dimension, the power densities in CPU chip have been increasing fastly. The high temperature on chip resulted by power densities threats the processor's performance and chip's reliability. This paper analyzed the thermal hotspots in die and their properties. A new architecture of function units in die - - hot units distributed architecture is suggested to cope with the problems of high power densities for future processor chip.

  11. HIV transcription is induced in dying cells

    SciTech Connect

    Woloschak, G.E.; Chang-Liu, Chin-Mei; Schreck, S. |; Panozzo, J.; Libertin, C.R.

    1996-02-01

    Using HeLa cells stably transfected with an HIV-LTR-CAT construct, we demonstrated a peak in CAT induction that occurs in viable (but not necessarily cell-division-competent) cells 24 h following exposure to some cell-killing agents. {gamma} rays were the only cell-killing agent which did not induce HIV transcription; this can be attributed to the fact that {gamma}-ray-induced apoptotic death requires functional p53, which is not present in HeLa cells. For all other agents, HIV-LTR induction was dose-dependent and correlated with the amount of cell killing that occurred in the culture. Doses which caused over 99% cell killing induced HIV-LTR transcription maximally, demonstrating that cells that will go on to die by 14 days are the cells expressing HIV-LTR-CAT.

  12. Der Weltraum. Die Originalfotografien der NASA.

    NASA Astrophysics Data System (ADS)

    Klotz, H.

    This book is based on an exhibition in 1985 of many of the spectacular images obtainedby NASA's planetary missions and Earth reconnaissance satellites during the past two decades. The exhibition was organized by the Baxter Art Gallery, California Institute of Technology, Pasadena. The photographs have been prepared by the Jet Propulsion Laboratory, Pasadena.Contents: Das Sonnensystem - eine geowissenschaftliche Betrachtung (W. Ziegler). Der beharrliche Beobachter (C. Knight).Der Weltraum. Ranger - Der Mond. Surveyor - Der Mond. Lunar-Orbiter -Der Mond. Mariner 4, 6, 7 - Mars. Mariner 10 - Venus, Merkur. Viking - Mars. Voyager - Jupiter. Voyager - Saturn. Voyager - Uranus. Voyager - Neptun. Seasat. IRAS. SIR-A und SIR-B. Galileo. Beta Pictoris. Laufende Weltraumprojekte. Zukünftige Weltraumprojekte. Ein Blick zurück... und nach vorn (M. Maegraith). Anhang - Die Probleme der Bildübertragung. Chronologie der Weltraumflüge.

  13. Clinical Criteria for Physician Aid in Dying.

    PubMed

    Orentlicher, David; Pope, Thaddeus Mason; Rich, Ben A

    2016-03-01

    More than 20 years ago, even before voters in Oregon had enacted the first aid in dying (AID) statute in the United States, Timothy Quill and colleagues proposed clinical criteria AID. Their proposal was carefully considered and temperate, but there were little data on the practice of AID at the time. (With AID, a physician writes a prescription for life-ending medication for a terminally ill, mentally capacitated adult.) With the passage of time, a substantial body of data on AID has developed from the states of Oregon and Washington. For more than 17 years, physicians in Oregon have been authorized to provide a prescription for AID. Accordingly, we have updated the clinical criteria of Quill, et al., based on the many years of experience with AID. With more jurisdictions authorizing AID, it is critical that physicians can turn to reliable clinical criteria. As with any medical practice, AID must be provided in a safe and effective manner. Physicians need to know (1) how to respond to a patient's inquiry about AID, (2) how to assess patient decision making capacity, and (3) how to address a range of other issues that may arise. To ensure that physicians have the guidance they need, Compassion & Choices convened the Physician Aid-in-Dying Clinical Criteria Committee, in July 2012, to create clinical criteria for physicians who are willing to provide AID to patients who request it. The committee includes experts in medicine, law, bioethics, hospice, nursing, social work, and pharmacy. Using an iterative consensus process, the Committee drafted the criteria over a one-year period.

  14. Hubble's View of a Dying Star

    NASA Technical Reports Server (NTRS)

    2003-01-01

    A recent image of a dying star containing strange, complex structures may help explain the death throes of stars and defy our current understanding of physics. The image of protoplanetary nebula IRAS22036+5306 (in the Infrared Astronomical Satellite Point Source Catalog) was taken on Dec. 15, 2001, by the Wide Field and Planetary Camera 2, designed and built by NASA's Jet Propulsion Laboratory, onboard NASA's Hubble Space Telescope. It is one of the best images yet to capture a fleeting period at the end of a Sun-like star's life, called the protoplanetary nebula phase.

    This phase, which looks like a beautiful cloud of glowing gas lit up by ultraviolet light from the star's core, results when a star evolves into a bloated red giant and sheds its outer layers. 'Protoplanetary nebulas are rare objects with short lifetimes,' said JPL astrophysicist Dr. Raghvendra Sahai. 'It has generally been very difficult to obtain images of such objects in which their structure can be resolved in detail.'

    This image is particularly important because it contains a series of what Sahai and his colleagues call 'knotty jets,' blob-like objects emerging along roughly straight lines from the center of the cigar-shaped, bipolar nebula (See insets). There are various theories about what may produce such jets, though it is hard to prove their existence due to their short-lived, episodic nature. Detailed multi-wavelength studies of these nebulas with NASA's Great Observatories are being carried out to understand the nature and origin of these enigmatic jets, and how they may be sculpting shrouds of dying stars into exotic shapes. The Hubble Space Telescope is one of NASA's Great Observatories.

  15. MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), DETAIL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), DETAIL SHOWING INSCRIPTION ON FRONT ELEVATION. VIEW TO NORTHEAST. - Leavenworth National Cemetery, 150 Muncie Road, Leavenworth, Leavenworth County, KS

  16. HUBBLE SURVEYS DYING STARS IN NEARBY GALAXY

    NASA Technical Reports Server (NTRS)

    2002-01-01

    From ground-based telescopes, the glowing gaseous debris surrounding dying, sun-like stars in a nearby galaxy, called the Large Magellanic Cloud, appear as small, shapeless dots of light. But through the 'eyes' of NASA's Hubble Space Telescope, these bright dots take on a variety of shapes, from round- to pinwheel-shaped clouds of gas. Using Hubble's Space Telescope Imaging Spectrograph, scientists probed the glowing gas surrounding 27 dying stars, called planetary nebulae, in the Large Magellanic Cloud. The observations represent the most detailed study of planetary nebulae outside the Milky Way. The six objects in the picture illustrate the assortment of planetary nebulae identified in the galaxy. SMP 16, 30, and 93 are examples of a bipolar nebula, twin lobes of gas projecting away from a dying star. SMP 10 has a pinwheel shape and is known as a 'point-symmetric' nebula. SMP 4 has an elliptical appearance, and SMP 27, consisting of four lobes of gas, is called a 'quadrupolar' nebula. The lines point to the objects' locations in the Large Magellanic Cloud. A ground-based observatory snapped the picture of this galaxy. In the pictures of the planetary nebulae, color corresponds to temperature. Blue represents hotter regions of the nebulae and red, cooler. Scientists are probing these illuminated stellar relics in our neighboring galaxy because they are at relatively the same distance - about 168,000 light-years -- from Earth. Knowing the distance to these objects allows scientists to compare their shapes and sizes, and precisely determine the brightness of their central stars. For this reason, even though these glowing remains of dying stars are about 50 times farther away than the stunning planetary nebulae photographed in the Milky Way, they are of invaluable importance. By sampling this population, scientists noticed that the bipolar nebulae are richer in some heavier elements, such as neon, than those with a more spherical shape. At the dawn of the universe

  17. HUBBLE SURVEYS DYING STARS IN NEARBY GALAXY

    NASA Technical Reports Server (NTRS)

    2002-01-01

    From ground-based telescopes, the glowing gaseous debris surrounding dying, sun-like stars in a nearby galaxy, called the Large Magellanic Cloud, appear as small, shapeless dots of light. But through the 'eyes' of NASA's Hubble Space Telescope, these bright dots take on a variety of shapes, from round- to pinwheel-shaped clouds of gas. Using Hubble's Space Telescope Imaging Spectrograph, scientists probed the glowing gas surrounding 27 dying stars, called planetary nebulae, in the Large Magellanic Cloud. The observations represent the most detailed study of planetary nebulae outside the Milky Way. The six objects in the picture illustrate the assortment of planetary nebulae identified in the galaxy. SMP 16, 30, and 93 are examples of a bipolar nebula, twin lobes of gas projecting away from a dying star. SMP 10 has a pinwheel shape and is known as a 'point-symmetric' nebula. SMP 4 has an elliptical appearance, and SMP 27, consisting of four lobes of gas, is called a 'quadrupolar' nebula. The lines point to the objects' locations in the Large Magellanic Cloud. A ground-based observatory snapped the picture of this galaxy. In the pictures of the planetary nebulae, color corresponds to temperature. Blue represents hotter regions of the nebulae and red, cooler. Scientists are probing these illuminated stellar relics in our neighboring galaxy because they are at relatively the same distance - about 168,000 light-years -- from Earth. Knowing the distance to these objects allows scientists to compare their shapes and sizes, and precisely determine the brightness of their central stars. For this reason, even though these glowing remains of dying stars are about 50 times farther away than the stunning planetary nebulae photographed in the Milky Way, they are of invaluable importance. By sampling this population, scientists noticed that the bipolar nebulae are richer in some heavier elements, such as neon, than those with a more spherical shape. At the dawn of the universe

  18. [In Process Citation].

    PubMed

    Bieri, Andreas; Kamber, Matthias; Sterchi, Martin; Mullis, Primus E

    2014-04-01

    In der Schweiz werden jährlich rund 2000 – 3000 Dopingkontrollen bei Athletinnen und Athleten durchgeführt. Unlängst ist aber bekannt, dass der Gebrauch von Anabolika und andern Dopingsubstanzen ein nicht mehr auf den Spitzensport begrenztes Phänomen darstellt. Auch im ambitionierten Breitensport, insbesondere im Fitnessbereich, ist der Gebrauch von Anabolika zur Leistungssteigerung verbreitet. Die Abgabe und Verschreibung von Substanzen auf der Dopingliste an Athleten des reglementierten Wettkampfsports ist strafbar, außer es stehen keine Alternativen zur Verfügung. In diesen Fällen können sogenannte Ausnahmebewilligungen zu therapeutischen Zwecken beantragt werden. Für Hausärzte in der Praxis, die Sportler mitbetreuen, ist es daher einerseits von größter Bedeutung, die rechtliche Situation im Umgang mit Doping zu kennen. Andererseits können auch schwerwiegende unerwünschte Wirkungen durch den Konsum von Anabolika auftreten, die es frühzeitig zu erkennen gilt.

  19. Multi-strata subsurface laser die singulation to enable defect-free ultra-thin stacked memory dies

    NASA Astrophysics Data System (ADS)

    Teh, W. H.; Boning, D.; Welsch, R.

    2015-05-01

    We report the extension of multi-strata subsurface infrared (1.342 μm) pulsed laser die singulation to the fabrication of defect-free ultra-thin stacked memory dies. We exploit the multi-strata interactions between generated thermal shockwaves and the preceding high dislocation density layers formed to initiate crack fractures that separate the individual dies from within the interior of the die. We show that optimized inter-strata distances between the high dislocation density layers together with effective laser energy dose can be used to compensate for the high backside reflectance (up to ˜ 82%) wafers. This work has successfully demonstrated defect-free eight die stacks of 25 μm thick mechanically functional and 46 μm thick electrically functional memory dies.

  20. L-connect routing of die surface pads to the die edge for stacking in a 3D array

    DOEpatents

    Petersen, Robert W.

    2000-01-01

    Integrated circuit chips and method of routing the interface pads from the face of the chip or die to one or more sidewall surfaces of the die. The interconnection is routed from the face of the die to one or more edges of the die, then routed over the edge of the die and onto the side surface. A new pad is then formed on the sidewall surface, which allows multiple die or chips to be stacked in a three-dimensional array, while enabling follow-on signal routing from the sidewall pads. The routing of the interconnects and formation of the sidewall pads can be carried out in an L-connect or L-shaped routing configuration, using a metalization process such as laser pantography.

  1. Pseudotumour of the Mandible Associated with von Willebrand's Disease.

    PubMed

    Daniel Sathiya, S S; Pari Selvakumar, P; Singh, Mandeep; Abraham, Aby; Koshy, Santosh

    2015-03-01

    Patients with bleeding disorders may occasionally present with pseudotumours. Most commonly these occur in the soft tissues and long bones, and are very rare in the maxillofacial region. We present the clinical details and management of a pseudotumour of the mandible in a 12-year-old girl with von Willebrand's disease.

  2. Treasure in the Library Attic: Von Ranke at Syracuse.

    ERIC Educational Resources Information Center

    Coville, Bruce

    1984-01-01

    Traces history of private library of German scholar, Leopold von Ranke, which was purchased by Syracuse University in 1888. Efforts of librarian Charles W. Bennett in 1870s and Professor James Powell beginning in late 1960s, and restoration and cataloging of collection are highlighted. Items from the collection are noted. (EJS)

  3. Dr. Wernher Von Braun near the mobile launcher.

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Dr. George Mueller, NASA associate administrator for manned space flight, and Dr. Wernher Von Braun (right), director of the Marshall Space Flight Center, are seen near the mobile launcher carrying a 363 foot tall Saturn V space launch vehicle as the rocket is rolled from the vehicle assembly building at KSC for its three mile trip to the launch pad.

  4. Dr. Wernher Von Braun with Congressman Gerald R. fod

    NASA Technical Reports Server (NTRS)

    1999-01-01

    On a visit to the Marshall Space Flight Center in April, 1964, Congressman Gerald R. Ford, Jr. Republican of Michigan, was warmly greeted by Dr. Wernher Von Braun, Marshall Space Flight Center director. Ford, along with two other congressmen, visited the center for a briefing on the Saturn program and for a tour of the facilities.

  5. Dr. von Braun With a Model of a Launch Vehicle

    NASA Technical Reports Server (NTRS)

    1950-01-01

    Dr. von Braun stands beside a model of the upper stage (Earth-returnable stage) of the three-stage launch vehicle built for the series of the motion picture productions of space flight produced by Walt Disney in the mid-1950's.

  6. Anaesthesia in Von Gierke's disease. Current approach to management.

    PubMed

    Bevan, J C

    1980-07-01

    A case report of a patient with Von Gierke's (glycogen storage disease Cori type (1)1 disease who required femoral osteotomy is presented. Current techniques of management of this condition which are likely to improve the outcome of general anaesthesia and surgery are discussed. PMID:6933867

  7. Von Kármán between Aachen and Pasadena

    NASA Astrophysics Data System (ADS)

    Krause, Egon; Kalkmann, Ulrich

    2013-05-01

    In the Introduction the reader is referred back to the academic ceremonials held after Theodore von Kármán's death in Aachen in May 1963. His work as the first director of the Aerodynamisches Institut (Institute of Aerodynamics) of the RWTH Aachen University of Technology from 1913 on and his initiative to re-establish international cooperation after World War I, resulting in the International Union of Theoretical and Applied Mechanics (IUTAM), are commented on. The following chapter describes von Kármán's relation to his former teacher Ludwig Prandtl. Some of von Kármán's scientific contributions during his time in Aachen are briefly reviewed. Thereafter, his first contacts to the California Institute of Technology are covered. Finally, the scientific and political circumstances, which led to von Kármán's decision to leave Germany in the early thirties, are elucidated in some detail. The English translation of the titles of the Aachen papers is given in Appendix I.

  8. The education of Ehrenfried Walther von Tschirnhaus (1651-1708).

    PubMed

    Adler, Jacob

    2015-02-01

    Ehrenfried Walther von Tschirnhaus, mathematician, inventor, and correspondent of Spinoza, is often thought to have studied medicine at Leiden, though documentation of this fact has been lacking. Tschirnhaus' medical education is here documented, along with the nature of his medical practice. PMID:24585587

  9. Ernst von Glasersfeld's Radical Constructivism and Truth as Disclosure

    ERIC Educational Resources Information Center

    Joldersma, Clarence W.

    2011-01-01

    In this essay Clarence Joldersma explores radical constructivism through the work of its most well-known advocate, Ernst von Glasersfeld, who combines a sophisticated philosophical discussion of knowledge and truth with educational practices. Joldersma uses Joseph Rouse's work in philosophy of science to criticize the antirealism inherent in…

  10. Wernher von Braun: Reflections on His Contributions to Space Exploration

    NASA Technical Reports Server (NTRS)

    Goldman, Arthur E.

    2012-01-01

    In 1950, Dr. Wernher von Braun and approximately 100 of his team members came to Huntsville, Alabama, to begin work with the Army on what would later become America's historic space program. He would later serve as the first director of the Marshall Space Flight Center and led the development of the Saturn V launch vehicle that launched seven crewed American mission to the moon, as well as America s first space station, Skylab. Von Braun is best known for his team s technical achievements. He realized his dream of exploring outer space by helping place humans on the moon. His engineering and managerial talent during the Apollo era had contributed to a technological revolution. He was by all accounts a good engineer, but he was only one among many. What set Von Braun apart were his charisma, his vision, and his leadership skills. He inspired loyalty and dedication in the people around him. He understood the importance of communicating his vision to his team, to political and business leaders and the public. Today, the Marshall Center continues his vision by pursuing engineering and scientific projects that will continue to open space to exploration. This presentation will discuss Von Braun's impact on Huntsville, the Marshall Center, the nation and the world and look at his contributions in context of where world space exploration is today.

  11. The education of Ehrenfried Walther von Tschirnhaus (1651-1708).

    PubMed

    Adler, Jacob

    2015-02-01

    Ehrenfried Walther von Tschirnhaus, mathematician, inventor, and correspondent of Spinoza, is often thought to have studied medicine at Leiden, though documentation of this fact has been lacking. Tschirnhaus' medical education is here documented, along with the nature of his medical practice.

  12. Development of a competency-based formative progress test with student-generated MCQs: Results from a multi-centre pilot study.

    PubMed

    Wagener, Stefan; Möltner, Andreas; Tımbıl, Sevgi; Gornostayeva, Maryna; Schultz, Jobst-Hendrik; Brüstle, Peter; Mohr, Daniela; Vander Beken, Anna; Better, Julian; Fries, Martin; Gottschalk, Marc; Günther, Janine; Herrmann, Laura; Kreisel, Christian; Moczko, Tobias; Illg, Claudius; Jassowicz, Adam; Müller, Andreas; Niesert, Moritz; Strübing, Felix; Jünger, Jana

    2015-01-01

    Einleitung: Progresstests geben Studierenden Feedback über ihren Wissenszuwachs im Verlauf ihres Studiums. In der medizinischen Ausbildung haben Peer-assisted-learning und kompetenzbasierte Ausbildung zunehmend Bedeutung erlangt. Während Progresstests sich als longitudinales Feedback-Instrument bewährt haben, gibt es bisher keine Progresstests, die in Zusammenarbeit mit Studierenden erstellt wurden und die die Kompetenzorientierung der medizinischen Ausbildung aufgreifen.In dieser Studie soll zum einen untersucht werden, inwieweit Studierende in die Prüfungsentwicklung eines Progresstests eingebunden werden können und zum anderen soll gezeigt werden, dass sich die Wissensaspekte von Kompetenzen in einem kompetenzorientierten Progresstest abbilden lassen.Methoden: Für den kompetenzorientierten Progresstest wurde ein zweidimensionaler „Blueprint“ für 144 MC-Fragen mit gruppierten medizinischen Fächern und gruppierten Kompetenzbereichen von drei Expertengruppen erstellt. An der Entwicklung des kompetenzorientierten Progresstests haben sich 31 Studierende aus sieben medizinischen Fakultäten in Deutschland aktiv beteiligt. Nach einem intensiven und umfassenden Schulungsprogramm erstellen und reviewten die Studierenden unter Nutzung einer eigenständigen Plattform des ItemManagementSystems die Prüfungsfragen des kompetenzorientierten Progresstests. Der kompetenzorientierte Progresstest wurde im November 2013 an acht medizinischen Fakultäten in Deutschland als formativer Test im Rahmen einer Pilotstudie durchgeführt, an dem 469 Studierende teilnahmen. Die erzielten Punktwerte wurden für den Gesamttest sowie in differenzierter Form für die „Fächergruppen“ und „Kompetenzbereiche“ analysiert. Ergebnisse: Für den Piloteinsatz im Jahr 2013 wurde von den Studierenden ein MC-Fragenpool von über 200 MC-Fragen entwickelt. 118 MC-Fragen von Studierenden wurden im Progresstest verwendet. 26 MC-Fragen wurden von Dozenten insbesondere im Bereich

  13. Regional ontogeny of New England salt marsh die-off.

    PubMed

    Coverdale, Tyler C; Bertness, Mark D; Altieri, Andrew H

    2013-10-01

    Coastal areas are among the world's most productive and highly affected ecosystems. Centuries of human activity on coastlines have led to overexploitation of marine predators, which in turn has led to cascading ecosystem-level effects. Human effects and approaches to mediating them, however, differ regionally due to gradients in biotic and abiotic factors. Salt marsh die-off on Cape Cod, Massachusetts (U.S.A.), triggered by a recreational-fishing-induced trophic cascade that has released herbivorous crabs from predator control, has been ongoing since 1976. Similar salt marsh die-offs have been reported in Long Island Sound and Narragansett Bay (U.S.A.), but the driving mechanism of these die-offs has not been examined. We used field experiments to assess trophic interactions and historical reconstructions of 24 New England marshes to test the hypotheses that recreational fishing and predator depletion are a regional trigger of salt marsh die-off in New England and that die-offs in Long Island Sound and Narragansett Bay are more recent than those on Cape Cod. Predator depletion was the general trigger of marsh die-off and explained differences in herbivorous crab abundance and the severity of die-off across regions. Die-offs in Long Island Sound and Narragansett Bay are following a trajectory similar to die-off on Cape Cod, but are approximately 20 years behind those on Cape Cod. As a result, die-off currently affects 31.2% (SE 2.2) of low-marsh areas in Long Island Sound and Narragansett Bay, less than half the severity of die-off on Cape Cod. Our results contribute to the growing evidence that recreational fishing is an increasing threat to coastal ecosystems and that studying the effects of human activity at regional scales can provide insight into local effects and aid in early detection and potential remediation.

  14. Patients' perspectives on dying and on the care of dying patients.

    PubMed

    McCormick, T R; Conley, B J

    1995-09-01

    Dying patients have much to teach us about their preferences for care. Although caring for dying patients is a major responsibility of physicians, the current curriculum in medical education emphasizes the pathophysiology and treatment of disease, with scarce time and emphasis for developing attitudes and skills essential to caring for persons in the final stage of life. Barriers to satisfactory communication may arise from either the physician or the patient, or both. Patients and physicians sometimes attach different meanings to words that are commonly used in discussing treatment. Barriers can be diminished or resolved by applying good communication skills, including attending to both verbal and nonverbal signals, exploring incongruent affect, and empathically eliciting patients' perspectives about illness, treatment plans, and end-of-life issues. The competent care of dying patients must extent beyond the management of physical symptoms because patients may experience their gravest suffering from fears and anxieties that go unaddressed in conversations with their physician. Conflicts arise when the disease progresses and the end of life approaches if the physician and patient have not reached agreement on their expectations. Physicians may initiate life-prolonging mechanisms when patients actually prefer palliative care. Patients experience a reduction in both physical and psychological aspects of suffering when physicians use good communication skills, are sensitive to patients' perspectives, and actively work to reduce barriers to mutual understanding.

  15. Expression of abnormal von Willebrand factor by endothelial cells from a patient with type IIA von Willebrand disease.

    PubMed Central

    Levene, R B; Booyse, F M; Chediak, J; Zimmerman, T S; Livingston, D M; Lynch, D C

    1987-01-01

    Studies were conducted to characterize the biosynthesis of von Willebrand factor (vWf) by cultured endothelial cells (EC) derived from the umbilical vein of a patient with type IIA von Willebrand disease. The patient's EC, compared with those from normal individuals, produced vWf that had decreased amounts of large multimers and an increase in rapidly migrating satellite species, features characteristic of plasma vWf from patients with type IIA von Willebrand disease. The type IIA EC did produce a full spectrum of vWf multimers in both cell lysates and postculture medium, although the relative amounts of the largest species were decreased. The large multimers were degraded in conjunction with the appearance of rapidly migrating satellites that contained approximately equal to 170-kDa proteolytic fragments, suggesting that this patient's functional defect is due to abnormal proteolysis and not to a primary failure of vWf subunit oligomerization. Moreover, the observed degradation appears to result from an abnormal vWf molecule and not elevated protease levels. These results suggest that this patient's von Willebrand disease phenotype is caused by increased proteolytic sensitivity of his vWf protein. Images PMID:3306682

  16. Hemostatic efficacy, safety, and pharmacokinetics of a recombinant von Willebrand factor in severe von Willebrand disease

    PubMed Central

    Gill, Joan C.; Castaman, Giancarlo; Windyga, Jerzy; Kouides, Peter; Ragni, Margaret; Leebeek, Frank W. G.; Obermann-Slupetzky, Ortrun; Chapman, Miranda; Fritsch, Sandor; Pavlova, Borislava G.; Presch, Isabella

    2015-01-01

    This phase 3 trial evaluated the safety and hemostatic efficacy of a recombinant von Willebrand factor (rVWF) for treatment of bleeds in severe von Willebrand disease (VWD). rVWF was initially administered together with recombinant factor VIII (rFVIII) and subsequently alone, as long as hemostatic factor VIII activity (FVIII:C) levels were maintained. Pharmacokinetics (PK) were evaluated in a randomized cross-over design (rVWF vs rVWF:rFVIII at 50 IU VWF:ristocetin cofactor activity [RCo]/kg). Bleed control for all treated bleeds (N = 192 bleeds in 22 subjects) was rated good or excellent (96.9% excellent; 119 of 122 minor, 59 of 61 moderate, and 6 of 7 major bleeds) on a 4-point scale (4 = none to 1 = excellent). A single infusion was effective in 81.8% of bleeds. Treatment success, defined as the number of subjects with a mean efficacy rating of <2.5, was 100%. The PK profile of rVWF was not influenced by rFVIII (mean VWF:RCo terminal half-life: 21.9 hours for rVWF and 19.6 hours for rVWF:rFVIII). FVIII:C levels increased rapidly after rVWF alone, with hemostatic levels achieved within 6 hours and sustained through 72 hours after infusion. Eight adverse events (AEs; 6 nonserious AEs in 4 subjects and 2 serious AEs [chest discomfort and increased heart rate, without cardiac symptomatology] concurrently in 1 subject) were associated with rVWF. There were no thrombotic events or severe allergic reactions. No VWF or FVIII inhibitors, anti-VWF binding antibodies, or antibodies against host cell proteins were detected. These results show that rVWF was safe and effective in treating bleeds in VWD patients and stabilizes endogenous FVIII:C, which may eliminate the need for rFVIII after the first infusion. This trial was registered at www.clinicaltrials.gov as #NCT01410227. PMID:26239086

  17. Mathematik semantologisch verstehen

    NASA Astrophysics Data System (ADS)

    Wille, Rudolf

    Um zu verstehen, was Mathematik ist und bedeutet, reicht es nicht aus, mathematisches Denken und Wissen vielseitig zu erwerben. Hinzukommen muss stets ein angemessenes Verständnis der jeweiligen Bedeutungen mathematischer Denkformen, die in der aktual-realen Welt wirksam werden können. Beim Mathematik-Verstehen sollte es vor allem um ein Vermitteln des Selbstverständnisses der Mathematik, um ein Reflektieren des Bezugs der Mathematik zur realen Welt und um ein Beurteilen von Sinn, Bedeutung und Zusammenhang des Mathematischen in der Welt gehen.

  18. Die Materials for Critical Applications and Increased Production Rates

    SciTech Connect

    David Schwam; John Wallace; Sebastian Birceanu

    2002-11-30

    Die materials for aluminum die-casting need to be resistant to heat checking, and have good resistance to washout and to soldering in a fast flow of molten aluminum. To resist heat checking, die materials should have a low coefficient of thermal expansion, high thermal conductivity, high hot yield strength, good temper softening resistance, high creep strength, and adequate ductility. To resist the washout and soldering, die materials should have high hot hardness, good temper resistance, low solubility in molten aluminum and good oxidation resistance. It is difficult for one material to satisfy with all above requirements. In practice, H13 steel is the most popular material for aluminum die casting dies. While it is not an ideal choice, it is substantially less expensive to use than alternative materials. However, in very demanding applications, it is sometimes necessary to use alternative materials to ensure a reasonable die life. Copper-base, nickel-base alloys and superalloys, titanium-,molybdenum-, tungsten-base alloys, and to some extent yttrium and niobium alloys, have all been considered as potential materials for demanding die casting applications. Most of these alloys exhibit superior thermal fatigue resistance, but suffer from other shortcomings.

  19. Einführung in die Relativitätstheorie.

    NASA Astrophysics Data System (ADS)

    D'Inverno, R.

    This book is a German translation, by O. Richter, of the English original "Introducing Einstein's relativity", published in 1992 (see Abstr. 55.003.063). Contents: Überblick. A. Die Spezielle Relativitätstheorie. B. Der Tensorformalismus. C. Die Allgemeine Relativitätstheorie. D. Schwarze Löcher. E. Gravitationswellen. F. Kosmologie.

  20. A Study of the Training of Tool and Die Makers.

    ERIC Educational Resources Information Center

    Horowitz, Morris A.; Herrnstadt, Irwin L.

    To develop and test a methodology which would help determine the combination of education, training, and experience that is most likely to yield highly qualified workers in specific occupations, the tool and die maker trade was selected for examination in the Boston Metropolitan Area. Tool and die making was chosen because it is a clearly…

  1. Death and Dying Anxiety among Bereaved and Nonbereaved Elderly Parents

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Tinsky-Roimi, Tal

    2011-01-01

    This study examines differences in death and dying anxiety between bereaved and nonbereaved elderly Israeli parents, as well as correlates of these factors among bereaved parents. A total of 97 parents (49 bereaved, 48 nonbereaved) completed measures of death and dying anxiety and religiosity. Bereaved parents reported significantly higher dying…

  2. 5 Ways to Cope When a Loved One Dies

    MedlinePlus

    ... Cuts? 5 Ways to Cope When a Loved One Dies KidsHealth > For Teens > 5 Ways to Cope When a Loved One Dies Print A A A Text Size en ... presence of other people who knew your loved one can be comforting. Let your emotions be expressed ...

  3. Can We Humanize Dying in the General Hospital?

    ERIC Educational Resources Information Center

    Fleming, Stephen

    This paper reviews the literature on the behavior and attitudes of medical-nursing personnel toward the dying person and illustrates the frequent conflict between hospital staff and the needs of dying. Inner perturbation stemming from feelings of vicarious suffering, vicarious disintegration, or personal anxiety about death, education deficiencies…

  4. Death and Dying Anxiety among Elderly Arab Muslims in Israel

    ERIC Educational Resources Information Center

    Azaiza, Faisal; Ron, Pnina; Shoham, Meyrav; Gigini, Ibrahim

    2010-01-01

    Death and dying anxiety were examined among elderly Arab Muslims in Israel. A total of 145 people aged 60 and over were interviewed using a standardized questionnaire. Nursing home residents reported higher death anxiety than others; women and uneducated participants reported greater levels of fear of death and dying than others. There were no…

  5. The design of a die with a vacuum thermal insulation

    NASA Astrophysics Data System (ADS)

    Baginski, A. G.; Utyev, O. M.; Kondratyeva, Y. M.

    2016-04-01

    A new design of a die for the polymer underwater granulation plants has been developed. It differs from similar plants in the design of heat-insulating elements. Vacuum hollows are used as a heat insulator. A vacuumization process does not require a separate operation, and it is conducted simultaneously with connection of all the elements of the die by a brazing method.

  6. Thoughts about Death and Dying in an African Sample.

    ERIC Educational Resources Information Center

    Gijana, E. W. M.; And Others

    1990-01-01

    Examined attitudes toward death and dying among 163 Xhosa-speaking children and adults in South Africa. Found age, gender, belief in life after death, educational level, and exposure to death and dying were critical factors in formation of attitudes. Findings were similar to those from previous studies in African and western societies. (Author/NB)

  7. The Myriad Strategies for Seeking Control in the Dying Process

    ERIC Educational Resources Information Center

    Schroepfer, Tracy A.; Noh, Hyunjin; Kavanaugh, Melinda

    2009-01-01

    Purpose: This study explored the role control plays in the dying process of terminally ill elders by investigating the aspects of the dying process over which they seek to exercise control, the strategies they use, and whether they desire to exercise more control. Design and Methods: In-depth face-to-face interviews were conducted with 84…

  8. Personality Correlates of the Fear of Death and Dying Scale.

    ERIC Educational Resources Information Center

    Loo, Robert

    1984-01-01

    Examined personality dimensions of the Fear of Death and Dying Scale compared to the Eysenck Personality Questionnaire in a study of 88 students. Findings supported the validity of the Fear of Death and Dying Scale and its independence of social desirability. (JAC)

  9. Living and Dying: A Window on (Christian) Children's Spirituality

    ERIC Educational Resources Information Center

    Champagne, Elaine

    2008-01-01

    Faith and beliefs about living and dying are fundamental constituents of spiritual development. However, children are seldom asked to talk about their experiences of life and death. This article has a twofold purpose. It first describes children's expressions on living and dying, as heard during a newly developed programme which encourages…

  10. Including die and press deformations in sheet metal forming simulations

    NASA Astrophysics Data System (ADS)

    Pilthammar, Johan; Sigvant, Mats; Kao-Walter, Sharon

    2016-08-01

    Structural analysis, in Abaqus, of a stamping die and subsequent morphing of the tool surfaces in AutoForm were performed to improve a sheet metal forming simulation. First, the tool surfaces of the XC90 rear door inner were scanned. They were not matching when the die was unloaded and could therefore not give any satisfying results in sheet metal forming simulations. Scanned surface geometries were then added to a structural FE-model of the complete stamping die and some influential parts of the production press. The structural FE- model was analysed with Abaqus to obtain the structural deformations of the die. The calculated surface shapes were then transferred to AutoForm where a forming simulation was performed. Results from the different sheet metal forming simulations were compared to measured draw in curves and showed a substantial increase in accuracy and ability to analyse dies in running production when the morphed surfaces were used.

  11. Will the UK Supreme Court allow assisted dying?

    PubMed

    Griffith, Richard

    MPs overwhelmingly voted against passing the Assisted Dying Bill into law in September 2015. The Bill was defeated by a majority of 212, despite the heartfelt pleas of many MPs to pass it into law. The size of the defeat means that it is unlikely that Parliament will consider a similar law for many years. Yet many considered the Bill their last opportunity to make assisted dying lawful. There is, however, one further possible way assisted dying could become lawful in the UK--and that would be where the Supreme Court allowed it. In this article, the author reviews the Supreme Court's decision in R (on the application of Nicklinson v Ministry of Justice [2014] and considers how likely it is that the Supreme Court will now sanction assisted dying following Parliament's refusal to enact an assisted dying law. PMID:26500128

  12. Will the UK Supreme Court allow assisted dying?

    PubMed

    Griffith, Richard

    MPs overwhelmingly voted against passing the Assisted Dying Bill into law in September 2015. The Bill was defeated by a majority of 212, despite the heartfelt pleas of many MPs to pass it into law. The size of the defeat means that it is unlikely that Parliament will consider a similar law for many years. Yet many considered the Bill their last opportunity to make assisted dying lawful. There is, however, one further possible way assisted dying could become lawful in the UK--and that would be where the Supreme Court allowed it. In this article, the author reviews the Supreme Court's decision in R (on the application of Nicklinson v Ministry of Justice [2014] and considers how likely it is that the Supreme Court will now sanction assisted dying following Parliament's refusal to enact an assisted dying law.

  13. [Death and dying in the nurse formation process].

    PubMed

    de Oliveira, Wilker Invenção Azevedo; Amorim, Rita de Cruz

    2008-06-01

    Death is one of the great mysteries of life. We live in a death denying-society. This aim of the present qualitative study was to see if undergraduate Nursing students are prepared to face death and dying during training. Seven students enrolled in the discipline "Supervised Training II", the last discipline of the course were interviewed using a semi-structured script, and the collected data were submitted to content analysis. The following categories were discussed: facing death in daily life, reaction to death, and dying in training. It was observed that the process of death and dying is not approached in a manner that supplies the students' needs in routine situations that require them to provide dying patients humane conditions to die.

  14. Akteure in der Renaturierung

    NASA Astrophysics Data System (ADS)

    Wiegleb, Gerhard; Lüderitz, Volker

    Dieses Kapitel behandelt die Bedeutung von Akteuren in Renaturierungsprojekten. Renaturierung ist die absichtliche Veränderung der Umwelt in Richtung auf einen von den Akteuren als "naturnäher“ erachteten Zustand (Kapitel 1). Betroffen davon ist nicht nur die Umwelt der Akteure, sondern auch die Umwelt anderer. Daraus ergeben sich sowohl aktive wie passive Bezüge zur Renaturierung. Aktive und passive Rollen sind je nach Ausdehnung, Zeithorizont und Trägerschaft nicht immer trennbar, sodass die Unterscheidung in Akteure und Betroffene nur begrenzte Gültigkeit hat. Methodisch basiert die Untersuchung der Teilhabe an Renaturierung auf Akteurs- und Akzeptanzanalysen (vgl. Segert und Zierke 2004, Newig 2004). Die vorliegenden Ausführungen befassen sich schwerpunktmäßig mit dem Aspekt der Akteursanalyse. Die Frage der Akzeptanz wird kurz angesprochen (Kapitel 15, Umweltethische Aspekte). Anhand der Analyse zweier Fallstudien werden dann einige Schlussfolgerungen gezogen. Die Darstellung soll im Wesentlichen das Feld für zukünftig nötige Forschungsarbeiten strukturieren.

  15. When does a human being die?

    PubMed

    Schofield, G M; Urch, C E; Stebbing, J; Giamas, G

    2015-08-01

    For most of human history there has been no particular importance of establishing the exact time of a person's death, only whether the person is alive or dead. With modern medical advances, however, more precise answers are looked for. For a definition of death to succeed is important that it is a universal definition and that under it, all human beings are correctly identified as alive or dead. This article initially examines the most commonly proposed positions on when a human being dies those of cardiopulmonary death, whole brain death, brainstem death and higher brain death and for each describes scenarios that provide counter-intuitive results. Intuition is used as a benchmark as this is what our patients most commonly use. The second part of the article seeks to establish a more robust definition of death. We argue that death is an event that takes place at a set point in time, when the collection of bodily processes that maintains homoeostasis finally cease. Based upon defining 'human being' as being in possession of human DNA and Olsen's Animalism, the model is applicable to a full lifespan and maintains personal identity throughout the course of life. That this conclusion will interfere with clinical practice concerning organ transplantation is considered, but countered with the argument that there has been a conflation of the normative question of timing of organ retrieval for transplantation with the metaphysical question of what is death.

  16. NICMOS PEERS INTO HEART OF DYING STAR

    NASA Technical Reports Server (NTRS)

    2002-01-01

    The Egg Nebula, also known as CRL 2688, is shown on the left as it appears in visible light with the Hubble Space Telescope's Wide Field and Planetary Camera 2 (WFPC2) and on the right as it appears in infrared light with Hubble's Near Infrared Camera and Multi-Object Spectrometer (NICMOS). Since infrared light is invisible to humans, the NICMOS image has been assigned colors to distinguish different wavelengths: blue corresponds to starlight reflected by dust particles, and red corresponds to heat radiation emitted by hot molecular hydrogen. Objects like the Egg Nebula are helping astronomers understand how stars like our Sun expel carbon and nitrogen -- elements crucial for life -- into space. Studies on the Egg Nebula show that these dying stars eject matter at high speeds along a preferred axis and may even have multiple jet-like outflows. The signature of the collision between this fast-moving material and the slower outflowing shells is the glow of hydrogen molecules captured in the NICMOS image. The distance between the tip of each jet is approximately 200 times the diameter of our solar system (out to Pluto's orbit). Credits: Rodger Thompson, Marcia Rieke, Glenn Schneider, Dean Hines (University of Arizona); Raghvendra Sahai (Jet Propulsion Laboratory); NICMOS Instrument Definition Team; and NASA Image files in GIF and JPEG format and captions may be accessed on the Internet via anonymous ftp from ftp.stsci.edu in /pubinfo.

  17. The right to die: beyond academia.

    PubMed

    Ramsey, Carole

    2016-03-01

    The world's first legal euthanasia death occurred in the Australian City of Darwin on Sunday 22 September 1996 when Bob Dent ended his life under the Northern Territory's short-lived Rights of the Terminally Ill Act 1995. Dent's death intensified argument about euthanasia in Australia, transforming the debate from a textbook discussion in social ethics into a vigorous and divisive social dispute. The day before he ended his life, Dent dictated a letter, written down by his wife. This description of his experience with terminal illness is graphic-the letter, his last effort to bring the plight of those living with terminal illness to public consciousness. In this paper I outline issues from the perspective of those, who like Bob Dent, the choice to die with dignity is personal and urgent. Rather than approach the issue purely from the theoretical, academic debate therefore, I present aspects that are largely unknown unless the experience of life-denying symptoms becomes real. From these aspects, dilemmas and consequences emerge that are not framed through the academic debate and in this way, I argue for the possibility of a framework that could change the law.

  18. Home care for the dying child.

    PubMed

    Gyulay, J E

    1989-01-01

    The death of a child suffering from a terminal illness or congenital anomalies incompatible with life is the most painful life experience a family has to face. We, as health-care providers, cannot always prevent the death or cure the disease process. However, we can allow the family appropriate decision-making processes, such as allowing the child to die at home. We cannot take the death away, but we can walk the child's and family's journey toward his transition. Few persons in life are as privileged to share such a depth of intimacy in life as we in health care do when living the life experience of death. Death can be likened to shedding or releasing of our physical earth coats toward physical death and individual family beliefs of transition. This journey is a sacred, private, individual, and painful experience. Fear and anxiety can be decreased with appropriate education, and providing an environment of excellent clinical expertise, support, compassion, trust, and love.

  19. Compassion in Dying v. State of Washington.

    PubMed

    1996-03-01

    The U.S. Court of Appeals for the Ninth Circuit, sitting en banc, affirmed a district court judgment that ruled unconstitutional a Washington statute banning assisted suicide, as applied to competent, terminally ill adults who wish to obtain prescription medication to hasten their deaths. The statute, which was challenged by a group of patients, physicians, and the nonprofit organization Compassion in Dying, was held to be unconstitutional because it violated the due process clause of the U.S. Constitution. The court took into consideration the interests of the state in protecting life, preventing suicides, preventing undue, arbitrary, or unfair influences on an individual's decision to end his life, and ensuring the integrity of the medical profession. These interests were balanced against an individual's strong liberty interest in determining how and when one's life should end. The court recognized this interest after assessing the growing public support for assisted suicide, changes in the causes of death and medical advances, and Supreme Court cases addressing due process liberty interests. The court then determined that the state's interest, which could be protected by adopting sufficient safeguards, did not outweigh the severe burden placed on the terminally ill, and thus the statute as applied was unconstitutional. PMID:11648417

  20. Optimization of Composition and Heat Treating of Die Steels for Extended Lifetime

    SciTech Connect

    David Schwam; John F. Wallace; Quanyou Zhou

    2002-01-30

    An ''average'' die casting die costs fifty thousand dollars. A die used in making die cast aluminum engine blocks can cost well over one million dollars. These costs provide a strong incentive for extension of die life. While vacuum quenched Premium Grade H13 dies have become the most widely used in the United States, tool makers and die casters are constantly searching for new steels and heat treating procedures to extend die life. This project was undertaken to investigate the effects of composition and heat treating on die life and optimize these parameters.

  1. Determination of the metal/die interfacial heat transfer coefficient of high pressure die cast B390 alloy

    NASA Astrophysics Data System (ADS)

    Cao, Yongyou; Guo, Zhipeng; Xiong, Shoumei

    2012-07-01

    High-pressure die cast B390 alloy was prepared on a 350 ton cold chamber die casting machine. The metal/die interfacial heat transfer coefficient of the alloy was investigated. Considering the filling process, a "finger"-shaped casting was designed for the experiments. This casting consisted of five plates with different thicknesses (0.05 inch or 1.27 mm to 0.25 inch or 6.35 mm) as well as individual ingates and overflows. Experiments under various operation conditions were conducted, and temperatures were measured at various specific locations inside the die. Based on the results, the interfacial heat transfer coefficient and heat flux were determined by solving the inverse heat transfer problem. The influence of the mold-filling sequence, sensor locations, as well as processing parameters including the casting pressure, die temperature, and fast/slow shot speeds on the heat transfer coefficient were discussed.

  2. De-tabooing dying control - a grounded theory study

    PubMed Central

    2013-01-01

    Background Dying is inescapable yet remains a neglected issue in modern health care. The research question in this study was “what is going on in the field of dying today?” What emerged was to eventually present a grounded theory of control of dying focusing specifically on how people react in relation to issues about euthanasia and physician-assisted suicide (PAS). Methods Classic grounded theory was used to analyze interviews with 55 laypersons and health care professionals in North America and Europe, surveys on attitudes to PAS among physicians and the Swedish general public, and scientific literature, North American discussion forum websites, and news sites. Results Open awareness of the nature and timing of a patient’s death became common in health care during the 1960s in the Western world. Open dying awareness contexts can be seen as the start of a weakening of a taboo towards controlled dying called de-tabooing. The growth of the hospice movement and palliative care, but also the legalization of euthanasia and PAS in the Benelux countries, and PAS in Montana, Oregon and Washington further represents de-tabooing dying control. An attitude positioning between the taboo of dying control and a growing taboo against questioning patient autonomy and self-determination called de-paternalizing is another aspect of de-tabooing. When confronted with a taboo, people first react emotionally based on “gut feelings” - emotional positioning. This is followed by reasoning and label wrestling using euphemisms and dysphemisms - reflective positioning. Rarely is de-tabooing unconditional but enabled by stipulated positioning as in soft laws (palliative care guidelines) and hard laws (euthanasia/PAS legislation). From a global perspective three shapes of dying control emerge. First, suboptimal palliative care in closed awareness contexts seen in Asian, Islamic and Latin cultures, called closed dying. Second, palliative care and sedation therapy, but not euthanasia

  3. Compaction die for forming a solid annulus on a right circular cylinder. [Patent application

    DOEpatents

    Harlow, J.L.

    1981-09-14

    A compacting die is disclosed wherein the improvement comprises providing a screen in the die cavity, the screen being positioned parallel to the side walls of said die and dividing the die cavity into center and annular compartments. In addition, the use of this die in a method for producing an annular clad ceramic fuel material is disclosed.

  4. You can only die thrice: death and dying of a human body in psychoanalytical perspective.

    PubMed

    Sterk, Karmen

    2010-12-01

    This paper compares the (cultural) necessity of death/dying, perceived as a sequence of Imaginary--Real--Symbolic, to Van Gennep's three-staged rite of passage. If this logic is disrupted, the subject responsible necessitates attribution of special social status and can come to embody the imagery of a life worth living. This philosophical framework, which includes epistemologies borrowed from medical anthropology, demonstrates there is more for humans to lose than biological (Real) life; a far greater loss is to exist without (Symbolic) reason to live. A critique of prevalent quantitative methodology in assessing links between spirituality and the human body is added.

  5. Enhancements in Magnesium Die Casting Impact Properties

    SciTech Connect

    David Schwam; John F. Wallace; Yulong Zhu; Srinath Viswanathan; Shafik Iskander

    2000-06-30

    % in AM50 to over 9% in AZ91, more of the intermetallic Mg17Al12 is formed in the microstructure. For instance, for 15 increase in the aluminum content from AM50 to AM60, the volume fraction of eutectic present in the microstructure increases by 35%! Eventually, the brittle Mg17Al12 compound forms an interconnected network that reduces ductility and impact resistance. The lower aluminum in AM50 and AM60 are therefore a desirable feature in applications that call for higher impact resistance. Further improvement in impact resistance depends on the processing condition of the casting. Sound castings without porosity and impurities will have better mechanical properties. Since magnesium oxidizes readily, good melting and metal transfer practices are essential. The liquid metal has to be protected from oxidation at all times and entrainment of oxide films in the casting needs to be prevented. In this regard, there is evidence that us of vacuum to evacuate air from the die casting cavity can improve the quality of the castings. Fast cooling rates, leading to smaller grain size are beneficial and promote superior mechanical properties. Micro-segregation and banding are two additional defect types often encountered in magnesium alloys, in particular in AZ91D. While difficult to eliminate, segregation can be minimized by careful thermal management of the dies and the shot sleeve. A major source of segregation is the premature solidification in the shot sleeve. The primary solid dendrites are carried into the casting and form a heterogeneous structure. Furthermore, during the shot, segregation banding can occur. The remedies for this kind of defects include a hotter shot sleeve, use of insulating coatings on the shot sleeve and a short lag time between pouring into the shot sleeve and the shot.

  6. 41 CFR 303-70.3 - Must we pay death-related expenses for an employee who dies while on leave, or who dies on a non...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-related expenses for an employee who dies while on leave, or who dies on a non-workday, while on temporary... MEMBERS General Policies § 303-70.3 Must we pay death-related expenses for an employee who dies while on leave, or who dies on a non-workday, while on temporary duty (TDY) or stationed OCONUS? Yes,...

  7. Cometary Knots Around A Dying Star

    NASA Technical Reports Server (NTRS)

    1994-01-01

    These gigantic, tadpole-shaped objects are probably the result of a dying star's last gasps. Dubbed 'cometary knots' because their glowing heads and gossamer tails resemble comets, the gaseous objects probably were formed during a star's final stages of life. Hubble astronomer C. Robert O'Dell and graduate student Kerry P. Handron of Rice University in Houston, Texas discovered thousands of these knots with the Hubble Space Telescope while exploring the Helix nebula, the closest planetary nebula to Earth at 450 light-years away in the constellation Aquarius. Although ground-based telescopes have revealed such objects, astronomers have never seen so many of them. The most visible knots all lie along the inner edge of the doomed star's ring, trillions of miles away from the star's nucleus. Although these gaseous knots appear small, they're actually huge. Each gaseous head is at least twice the size of our solar system; each tail stretches for 100 billion miles, about 1,000 times the distance between the Earth and the Sun. Astronomers theorize that the doomed star spews hot, lower-density gas from its surface, which collides with cooler, higher-density gas that had been ejected 10,000 years before. The crash fragments the smooth cloud surrounding the star into smaller, denser finger-like droplets, like dripping paint. This image was taken in August, 1994 with Hubble's Wide Field Planetary Camera 2. The red light depicts nitrogen emission ([NII] 6584A); green, hydrogen (H-alpha, 6563A); and blue, oxygen (5007A).

  8. Bleeding in renal failure: is von Willebrand factor implicated?

    PubMed Central

    Remuzzi, G; Livio, M; Roncaglioni, M C; Mecca, G; Donati, M B; de Gaetano, G

    1977-01-01

    Normal or increased concentrations of factor VIII procoagulant activity (VIIIC), factor VIII-related antigen (VIIIRA), and factor VIII-von Willebrand activity (VIIIVWF) were found in the predialysis plasma of 10 out of 11 patients with chronic renal failure (CRF). All patients had a bleeding time longer than 15 minutes and platelet retention to glass beads lower than 40%. The only patient who had reduced concentrations of all three factor VIII complex components was subsequently shown to have von Willebrand's disease. In four patients with CRF, very low platelet retention, and slightly prolonged bleeding time none of the three factor VIII COMPLEX COMPONENTS WERE SELECTIVely modified in predialysis samples. These findings suggest that the bleeding tendency common in CRF is not necessarily linked to defective plasma factor VIII-related activities. PMID:302134

  9. Marshall-Stickler phenotype associated with von Willebrand disease

    SciTech Connect

    MacDonald, M.R.; Baker, K.S.; Schaefer, G.B.

    1997-01-20

    We report on 6 individuals from three different kindreds with Marshall-Stickler (MS) phenotype, with characteristic orofacial abnormalities, arthropathy, deafness, and eye findings, all of whom were discovered to have a mild bleeding diathesis and coagulation-study findings consistent with mild von Willebrand disease (vWD). MS syndrome has been linked in some cases to the type II procollagen gene (COL2A1) on chromosome 12q, and to the collagen XI gene (COL11A2) on chromosome 6. The von Willebrand factor (vWF) is encoded by a 180-Kb gene located on the short arm of chromosome 12. This is the first reported association of these two disorders. 26 refs., 5 figs., 1 tab.

  10. Lipid storage myopathy in von Gierke's disease: a case report.

    PubMed

    Yamaguchi, K; Santa, T; Inoue, K; Omae, T

    1978-09-01

    An 18-year-old girl with von Gierke's disease associated with a lipid storage myopathy is reported. The diagnosis of von Gierke's disease was made from decreased activity in glucose-6-phosphatase in the jejunal biopsy specimen. Neurologically she showed generalized hypotonia of the muscles, atrophy of bilateral proximal muscles of the lower extremities, weakness in neck flexors, deltoid and lumbar girdle muscles, and a positive Gower's sign. Muscle biopsy from flexor femoris muscle revealed fatty deposition in type 1 fibers and atrophy of type 2 fibers and the diagnosis of an accompanying lipid storage myopathy was made. This case also had a ventricular septal defect confirmed by right cardiac catheterization. PMID:213538

  11. Water Experiments Related To The "Von Karman Sodium" Dynamo Project

    NASA Astrophysics Data System (ADS)

    Marie, L.; Bourgoin, M.; Petrelis, F.; Roy, J.; Burguete, J.; Chiffaudel, A.; Daviaud, F.; Fauve, S.; Odier, P.; Pinton, J.-F.

    2002-07-01

    The purpose of the "Von Karman Sodium" (V.K.S.) experiment is to study the "Dynamo Effect," namely the spontaneous generation of magnetic field in a flow of electrically conducting fluid. The device has been built at CEA / Cadarache, in collaboration with CEA / Saclay, Ecole Normale Superieure de Lyon and Ecole Normale Superieure de Paris. It consists of a cylindrical vessel, filled with liquid Sodium, in which two coaxial rotating disks induce a Von-Karman type flow. Several experimental runs have taken place since June 2000. In order to optimize the V.K.S. set-up, a half-scale water prototype has also been built. It has allowed us to measure mean velocity profiles, as well as pressure fluctuations and mechanical power dissipation. We have observed that under certain circumstances the mean component of the turbulent flow can undergo a global bifurcation.

  12. A DYING STAR IN GLOBULAR CLUSTER

    NASA Technical Reports Server (NTRS)

    2002-01-01

    A DYING STAR IN GLOBULAR CLUSTER M15 The globular cluster Messier 15 is shown in this color image obtained with the NASA Hubble Space Telescope's Wide Field Planetary Camera 2 (WFPC2). Lying some 40,000 light-years from Earth in the direction of the constellation Pegasus, M15 is one of nearly 150 known globular clusters that form a vast halo surrounding our Milky Way galaxy. Each of these clusters is a spherical association of hundreds of thousands of ancient stars. The image, prepared by the Hubble Heritage team, attempts to show the stars in M15 in their true colors. The brightest cluster stars are red giants, with an orange color due to surface temperatures lower than our Sun's. Most of the fainter stars are hotter, giving them a bluish-white color. If we lived in the core of M15, our sky would blaze with tens of thousands of brilliant stars both day and night! Nestled among the myriads of stars visible in the Hubble image is an astronomical oddity. The pinkish object to the upper left of the cluster's core is a gas cloud surrounding a dying star. Known as Kuestner 648, this was the first planetary nebula to be identified in a globular cluster. In 1928, F. G. Pease, working at the 100-inch telescope of California's Mount Wilson Observatory, photographed the spectrum of K 648 and discovered the telltale bright emission of a nebular gas cloud rather than a normal star. In the ensuing 70 years, only three more planetary nebulae have been discovered in globular clusters. The stars in M15 and other globular clusters are estimated to be about 12 billion years old. They were among the first generations of stars to form in the Milky Way. Our Sun, by comparison, is a youthful 4.6 billion years old. As a star like the Sun ages, it exhausts the hydrogen that fuels its nuclear fusion, and increases in size to become a red giant. Then it ejects its outer layers into space, producing a planetary nebula. The remnant star at the center of the nebula gradually dies away as a

  13. A DYING STAR IN GLOBULAR CLUSTER

    NASA Technical Reports Server (NTRS)

    2002-01-01

    A DYING STAR IN GLOBULAR CLUSTER M15 The globular cluster Messier 15 is shown in this color image obtained with the NASA Hubble Space Telescope's Wide Field Planetary Camera 2 (WFPC2). Lying some 40,000 light-years from Earth in the direction of the constellation Pegasus, M15 is one of nearly 150 known globular clusters that form a vast halo surrounding our Milky Way galaxy. Each of these clusters is a spherical association of hundreds of thousands of ancient stars. The image, prepared by the Hubble Heritage team, attempts to show the stars in M15 in their true colors. The brightest cluster stars are red giants, with an orange color due to surface temperatures lower than our Sun's. Most of the fainter stars are hotter, giving them a bluish-white color. If we lived in the core of M15, our sky would blaze with tens of thousands of brilliant stars both day and night! Nestled among the myriads of stars visible in the Hubble image is an astronomical oddity. The pinkish object to the upper left of the cluster's core is a gas cloud surrounding a dying star. Known as Kuestner 648, this was the first planetary nebula to be identified in a globular cluster. In 1928, F. G. Pease, working at the 100-inch telescope of California's Mount Wilson Observatory, photographed the spectrum of K 648 and discovered the telltale bright emission of a nebular gas cloud rather than a normal star. In the ensuing 70 years, only three more planetary nebulae have been discovered in globular clusters. The stars in M15 and other globular clusters are estimated to be about 12 billion years old. They were among the first generations of stars to form in the Milky Way. Our Sun, by comparison, is a youthful 4.6 billion years old. As a star like the Sun ages, it exhausts the hydrogen that fuels its nuclear fusion, and increases in size to become a red giant. Then it ejects its outer layers into space, producing a planetary nebula. The remnant star at the center of the nebula gradually dies away as a

  14. Chromosome number and ploidy level of balm (Melissa officinalis).

    PubMed

    Kittler, J; Schrader, O; Kästner, U; Marthe, F

    2015-01-01

    Die wachsende Bedeutung von Zitronenmelisse (Melissa officinalis L.) führt zur Ausdehnung des hierfür erforderlichen Anbauumfanges. Ein verbesserter Kenntnisstand der Genomstruktur, der Chromosomenzahl und der hiermit in Zusammenhang stehenden taxonomischen Struktur der Melisse sind unerlässliche Voraussetzungen für verbesserte, neue Sorten.Eine Kollektion von 40 Melisseherkünften (M. officinalis) wurde durchflusszytometrisch und durch FISH (18/25S and 5S rDNA) untersucht, um den Ploidiegrad und die Chromosomenzahl zu ermitteln. Drei unterschiedliche Typen wurden konnten bestimmt werden: diploide Genotypen mit 2n = 2× = 32 Chromosomen; tetraploide mit 2n = 4× = 64 Chromosomen und triploide mit 2n = 3× = 48 Chromosomen. Die haploide Chromosomenzahl ist mit x = 16 anzunehmen. Die erstmalig beschriebenen triploiden Herkünfte sind steril aber zytologisch und morphologisch über viele Jahre stabil. Sie zeigen eine bessere Winterhärte und einen schnelleren Wiederaufwuchs nach Ernteschnitten, wie auch größere Blätter und Internodien.Die Basischromosomenzahl von x = 16 wird erstmalig für die Art M. officinalis beschrieben.

  15. Dr. von Braun In Front of a Display of Missiles

    NASA Technical Reports Server (NTRS)

    1960-01-01

    In this photo, Director of the US Army Ballistic Missile Agency (ABMA) Development Operations Division, Dr. Wernher von Braun, is standing before a display of Army missiles celebrating ABMA's Fourth Open House. The missiles in the background include (left to right) a satellite on a Juno II shroud with a Nike Ajax pointing left in front of a Jupiter missile. The Lacrosse is in front of the Juno II. The Nike Hercules points skyward in front of the Juno II and the Redstone.

  16. Dr. Wernher Von Braun at the launch of Apollo 11.

    NASA Technical Reports Server (NTRS)

    1999-01-01

    Mission officials relax, all smiles, a few moments after the successful launch of the Apollo 11 spacecraft by Saturn V vehicle AS-506. Relieved of the tension of waiting through the countdown are (left to right) Charles W. Matthews, NASA deputy associate administrator for manned space flight; Dr. Wernher Von Braun, Director of the Marshall Space Flight Center; Dr. George E. Meuller, NASA associate administrator for manned spaceflight, and Lt. General Samuel C. Phillips, director of the Apollo program.

  17. Von Gierke's disease adopts an orphan (and its partner).

    PubMed

    Cheng, Alan; Saltiel, Alan R

    2009-01-01

    The enzyme glucose-6-phosphatase is critical for maintaining fasting blood sugar levels by increasing hepatic glucose production. Its absence in patients with von Gierke's disease leads to severe hypoglycemia and abnormal accumulation of glycogen (glycogenosis) in the liver. New players that control the expression of glucose-6-phosphatase have been identified that may provide insight into this metabolic disorder, as well as type 2 diabetes. PMID:19224896

  18. Baron von Zach's business relations with the Munich entrepreneur Joseph von Utzschneider (German Title: Geschäftsbeziehungen des Barons von Zach zu dem Münchner Unternehmer Joseph von Utzschneider)

    NASA Astrophysics Data System (ADS)

    Schneider, Ivo

    The relationship between the astronomer von Zach on the one side and the entrepreneur Joseph von Utzschneider and his partner Georg von Reichenbach on the other dates presumably from the year 1807 when Zach spent two months in Munich. Already in the same year Zach had ordered an instrument for himself and began to solicit business for the institute of Reichenbach, Utzschneider, and Liebherr, which was founded in 1804. One of the clients canvassed by Zach was the director of the observatory in Naples Zuccari. Zuccari had ordered the whole equipment for the new observatory from this institute in 1813. The instruments for Naples, which were completed in 1814, were sent accompanied by Reichenbach by land and sea to their destination where Reichenbach supervised their setup. At that time Reichenbach had separated from Utzschneider who kept the optical institute in Benediktbeuern with his new partner Joseph von Fraunhofer whereas Reichenbach became owner of the mathematical-mechanical institute in Munich. For personal and economical reasons Utzschneider began soon after to produce not only optical glass but also optical devices similar to those offered by Reichenbach. As soon as two institutes in Munich competed against each other on the market for sophisticated geodetical and astronomical instruments Zach sided with Utzschneider. Zach's main professional argument for this decision was that both competitors got the optical glass for their instruments from Utzschneider's optical institute in Benediktbeuern. This meant that Utzschneider had first choice and so the optical part of his instruments could be considered as better than that of Reichenbach`s instruments. Zach's role as an agent in Italy and France for the sale of products coming from Utzschneider's manufactories is highlighted by three of Zach's letters to Utzschneider from 1817 and 1818, two of which are reproduced here for the first time.

  19. Interpolatability distinguishes LOCC from separable von Neumann measurements

    SciTech Connect

    Childs, Andrew M.; Leung, Debbie; Mančinska, Laura; Ozols, Maris

    2013-11-15

    Local operations with classical communication (LOCC) and separable operations are two classes of quantum operations that play key roles in the study of quantum entanglement. Separable operations are strictly more powerful than LOCC, but no simple explanation of this phenomenon is known. We show that, in the case of von Neumann measurements, the ability to interpolate measurements is an operational principle that sets apart LOCC and separable operations.

  20. Canary Island Group and von Karman Cloud Vortices.

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Tis image shows a part of the Canary Island Group (28.0N, 16.0W) located just west of the NW coast of Africa. Low level stratus clouds often form here and become trapped in vertical movement because of an overlaying temperature inversion. The islands create a disturbance in the wind flow, generally from the north or northeast, that create distinctive cloud swirls known as von Karman Cloud Vortices on the downstream side of the island.

  1. von Braun and Buckbee View Demonstration at Space Science Center

    NASA Technical Reports Server (NTRS)

    1960-01-01

    Edward O. Buckbee, the first Director of the Alabama Space Science Center (left), and Dr. Wernher von Braun (right) view a demonstration of a simulated spacecraft which uses an actual hybrid rocket engine for liftoff, hover, and landing. The display was presented to the Alabama Space Science Center, later renamed the U.S. Space and Rocket Center, by United Technology Center, a division of United Aircraft.

  2. "The high cost of dying": what do the data show?

    PubMed

    Scitovsky, A A

    1984-01-01

    Assertions that we now spend too much of our medical dollar on the dying often imply a ready target for cost-containment efforts: frequency and intensity of expenditures at the end of life, especially for the aged. But available, although meager data suggest there has been neither a dramatic rise in the last 20 years in the use of the hospital as a place to die, nor of widespread use of "heroic" interventions on behalf of those who die. Rather, very sick patients receive intensive and expensive care; our ability to project rates of survival vs. terminal patient status warrants caution in approaches to medical economy.

  3. The British Interplanetary Society - Val Cleaver and Wernher von Braun

    NASA Astrophysics Data System (ADS)

    Willhite, I. P.

    This article is concerned with the early relationship between Wernher von Braun and the British Interplanetary Society (BIS). The BIS/Wernher von Braun/Val Cleaver correspondence files located here at the US Space & Rocket Center in Huntsville, Alabama are unparalleled. As one reads the stimulating comments between Cleaver and von Braun, the need to share their thoughts prevails. Following is an excerpt from one letter that whets ones appetite for more. 10 June 1951 Cleaver writes, “I'm so glad you enjoyed my last letter, and look forward to your promised further contribution to our discussion of the ethics of science in general and astronautics in particu- lar. As regards the one particular point on which you found yourself unable to hold your fire, I should say there are really two distinct issues at stake:. . .” This article attempts to represent the best of the letters as they goad each other on scientific principles, means to prevent wars, and other philosophic ideas.

  4. Disseminated cerebellar hemangioblastoma in two patients without von Hippel–Lindau disease

    PubMed Central

    Akimoto, Jiro; Fukuhara, Hirokazu; Suda, Tomohiro; Nagai, Kenta; Hashimoto, Ryo; Michihiro, Kohno

    2014-01-01

    Background: Two patients who had received a total resection of cerebellar hemangioblastoma developed cerebrospinal fluid dissemination during a long-term follow-up period. We present this rare disease with discussion based on the literature. Case Description: The patients were two women aged 45 and 57 years. In the cerebellar hemisphere, one patient had cystic hemangioblastoma of mural nodule type and the other had solid type. Both the patients successfully underwent total resection by craniotomy. They presented no mutations in the von Hippel-Lindau disease (VHL) gene or lesions in the other organs. One patient developed local recurrence 38 months after the initial surgery, and received stereotactic radiosurgery. Three spinal cord tumors developed 91 months later, and the tumors were disseminated to the entire cerebrospinal cavity 107 months later. The other patient developed hydrocephalus 53 months after the initial surgery with tumor tissues disseminated in the intracranial subarachnoid space. The conditions of the two patients gradually aggravated despite treatment with ventriculo-peritoneal shunt and irradiation to the whole brain and whole spinal cord. Conclusion: Cerebrospinal fluid dissemination of cerebellar hemangioblastoma was found dominantly in non-VHL patients. The diagnosis was made 10 years after the initial surgery. Irradiation therapy was performed, but the patients died about 2 years after the diagnosis was given. Molecular targeted therapies including vascular proliferation suppression have been attempted lately, but no effective therapy has been established. Early diagnosis of dissemination as well as combination of aggressive excision and stereotactic radiosurgery are considered to be appropriate for current interventions. PMID:25324974

  5. Disappearance of extrusion instabilities in brass capillary dies

    SciTech Connect

    Ghanta, V.G.; Riise, B.L.; Denn, M.M. |

    1999-03-01

    We have extruded a linear low-density polyethylene through capillary dies fabricated from stainless steel and brass. We confirm a result first reported by Ramamurthy [Ramamurthy, A. V., {open_quotes}Wall Slip in Viscous Fluids and Influence of Materials of Construction,{close_quotes} J. Rheol. {bold 30}, 337{endash}357 (1986)]: sharkskin can be eliminated by the use of a brass die. We also find a substantially enhanced throughput from the brass die relative to the stainless-steel die at stresses in the range where sharkskin is observed with the latter. Finally, the large pressure oscillations and periodic extrudate distortions observed in the {open_quotes}slip{endash}stick{close_quotes} region with stainless steel are absent with brass, where the transition to the {open_quotes}upper branch{close_quotes} of the flow curve is more gradual. {copyright} {ital 1999 Society of Rheology.}

  6. MICROORGANISMS DIE-OFF RATES IN URBAN STORMWATER RUNOFF 2007

    EPA Science Inventory

    Stormwater best management practices (BMPs) are often considered effective tools to mitigate the effects of stormwater pollutants before they are discharged to receiving waters. However, BMP performance for microorganisms removal is not well documented. Microorganisms die-off in...

  7. Characterization of Spray Lubricants for the Die Casting Process

    SciTech Connect

    Sabau, Adrian S

    2008-01-01

    During the die casting process, lubricants are sprayed in order to cool the dies and facilitate the ejection of the casting. The cooling effects of the die lubricant were investigated using Thermogravimetric analysis (TGA), heat flux sensors (HFS), and infrared imaging. The evolution of the heat flux and pictures taken using a high speed infrared camera revealed that lubricant application was a transient process. The short time response of the HFS allows the monitoring and data acquisition of the surface temperature and heat flux without additional data processing. A similar set of experiments was performed with deionized water in order to assess the lubricant effect. The high heat flux obtained at 300 C was attributed to the wetting and absorbant properties of the lubricant. Pictures of the spray cone and lubricant flow on the die were also used to explain the heat flux evolution.

  8. Laser and focused ion beam combined machining for micro dies.

    PubMed

    Yoshida, Y; Okazaki, W; Uchida, T

    2012-02-01

    We have developed a laser and focused ion beam (FIB) compound process for press mold dies of a micro lens array (MLA) and a micro needle array (MNA) in a glassy carbon (GC). The press mold die of the MLA was roughly fabricated by UV-YAG laser. After this process, we finished this surface by scanning FIB. As a result, higher accuracy and good roughness of surface profile can be realized. An optical glass is used to confirm the shape of lens. Moreover, we fabricated 6 × 6 through-holes in the GC by the spiral drilling in addition to the focus position movement of the UV laser for press mold die of the MNA. After the FIB process, we were able to make the needle die of surface and hole wall roughness less than 0.9 μm. A silicon rubber is used to confirm the shape of the holes.

  9. Child Dies in Hot Car Almost Once a Week

    MedlinePlus

    ... gov/news/fullstory_160479.html Child Dies in Hot Car Almost Once a Week Safe Kids Worldwide ... being left in a car that got too hot, according to Safe Kids Worldwide. Sometimes parents forget ...

  10. MICROORGANISMS DIE-OFF RATES IN URBAN STORMWATER RUNOFF 2007

    EPA Science Inventory

    Stormwater best management practices (BMPs) are often considered effective tools to mitigate the effects of stormwater pollutants before they are discharged to receiving waters. However, BMP performance for microorganisms removal is not well documented. Microorganisms die-off in ...

  11. REAR ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    REAR ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), SECTION 43A, LOOKING SOUTH ALONG EAST OBELISK ROAD. VIEW TO SOUTH. - Leavenworth National Cemetery, 150 Muncie Road, Leavenworth, Leavenworth County, KS

  12. 33. HISTORIC PLAQUE MARKING WHERE JOHNSTON DIED, ADJACENT TO PATHWAY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    33. HISTORIC PLAQUE MARKING WHERE JOHNSTON DIED, ADJACENT TO PATHWAY WITH CONCRETE CULVERT LEADING NORTH OUT OF RAVINE TOWARD JOHNSTON MEMORIAL SITE. VIEW NW. - Shiloh National Military Park Tour Roads, Shiloh, Hardin County, TN

  13. FRONT ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    FRONT ELEVATION OF MEMORIAL TO SOLDIERS WHO DIED FOR THIS COUNTRY (OBELISK), SECTION 43A, WITH HEADSTONES IN FOREGROUND. VIEW TO NORTHEAST. - Leavenworth National Cemetery, 150 Muncie Road, Leavenworth, Leavenworth County, KS

  14. Coping with Grief: When a Loved One Dies

    MedlinePlus

    ... remarkably well after their loved one died. “Their level of depression, which was very high during the caregiving phase before the death, returned to almost normal levels within 6 months after the death,” Schulz says. ...

  15. Einführung in die Renaturierungsökologie

    NASA Astrophysics Data System (ADS)

    Zerbe, Stefan; Wiegleb, Gerhard; Rosenthal, Gert

    Durch die übernutzung der Naturressourcen sind heute weltweit viele natürliche wie auch durch Kultur entstandene ökosysteme und Landschaften in ihren Funktionen und Leistungen stark beeinträchtigt oder sogar völlig zerstört. Bereits vor mehr als einem Jahrzehnt konstatierte (1995), dass ca. 45 % der terrestrischen Landoberfläche nur eine reduzierte Kapazität für die zukünftige Landnutzung haben. Als Grund hob er eine in der Vergangenheit nicht nachhaltige Landbewirtschaftung hervor. Mit einer gezielten Renaturierung der betroffenen ökosysteme soll dieser Trend umgekehrt werden (Harris und van Diggelen 2006). Vor diesem Hintergrund ist die ökosystemrenaturierung (ecological restoration) wichtiger Bestandteil der Planungs- und Naturschutzpraxis in Mitteleuropa und die Renaturierungsökologie (restoration ecology) zu einer eigenen wissenschaftlichen Arbeitsrichtung geworden.

  16. Chemical strategies for die/wafer submicron alignment and bonding.

    SciTech Connect

    Martin, James Ellis; Baca, Alicia I.; Chu, Dahwey; Rohwer, Lauren Elizabeth Shea

    2010-09-01

    This late-start LDRD explores chemical strategies that will enable sub-micron alignment accuracy of dies and wafers by exploiting the interfacial energies of chemical ligands. We have micropatterned commensurate features, such as 2-d arrays of micron-sized gold lines on the die to be bonded. Each gold line is functionalized with alkanethiol ligands before the die are brought into contact. The ligand interfacial energy is minimized when the lines on the die are brought into registration, due to favorable interactions between the complementary ligand tails. After registration is achieved, standard bonding techniques are used to create precision permanent bonds. We have computed the alignment forces and torque between two surfaces patterned with arrays of lines or square pads to illustrate how best to maximize the tendency to align. We also discuss complex, aperiodic patterns such as rectilinear pad assemblies, concentric circles, and spirals that point the way towards extremely precise alignment.

  17. 8. INTERIOR BEADED WALL BOARDING SHOWING TRIAL MARKS FROM DIES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. INTERIOR BEADED WALL BOARDING SHOWING TRIAL MARKS FROM DIES MADE IN CARPENTER'S SHOP Ph: Jack E, Boucher - March 1961 - Joseph Carpenter Silversmith Shop, 71 East Town Street, Norwichtown, New London County, CT

  18. A discussion on the proposed assisted dying law.

    PubMed

    Griffith, Richard

    2014-08-01

    Having failed in their attempt to persuade the United Kingdom Supreme Court to allow health professionals to participate in assisting patients to end their lives, the hopes of campaigners now lie with Parliament passing Lord Falconer's private members' Assisted Dying Bill. This article reviews the Supreme Court's decision in R (on the application of Nicklinson) v Ministry of Justice [2014] and considers how likely it is that Parliament will enact an assisted dying law. PMID:25089754

  19. Talking with patients. Is it different when they are dying?

    PubMed Central

    Coulombe, L.

    1995-01-01

    Talking with dying patients is different in some ways from talking with patients who do not have life-threatening illness; it can be frightening for physicians who have little experience. It is important to realize that, ultimately, the principles remain the same, and that the differences arise in the context and goals of the intervention. This article draws upon bedside experience to define several principles useful in talking with dying patients. Case examples illustrate each principle. PMID:7539652

  20. Moral dilemma: to kill or allow to die?

    PubMed

    Cole, J J

    1989-01-01

    The thesis of this paper is that while allowing a person to die with care can be morally justified in particular cases, the option of mercy killing can never be morally defended. There is a significant moral difference between these two concepts. Furthermore, the wedge argument, the medical fallibility argument, and the medical care and trust argument provide cogent and convincing reasons for maintaining a legal distinction between mercy killing and letting a person die.

  1. Microstructures and properties of aluminum die casting alloys

    SciTech Connect

    M. M. Makhlouf; D. Apelian; L. Wang

    1998-10-01

    This document provides descriptions of the microstructure of different aluminum die casting alloys and to relate the various microstructures to the alloy chemistry. It relates the microstructures of the alloys to their main engineering properties such as ultimate tensile strength, yield strength, elongation, fatigue life, impact resistance, wear resistance, hardness, thermal conductivity and electrical conductivity. Finally, it serves as a reference source for aluminum die casting alloys.

  2. Death and help expected from nurses when dying.

    PubMed

    Shih, Fu-Jin; Gau, Meei-Ling; Lin, Yaw-Sheng; Pong, Suang-Jing; Lin, Hung-Ru

    2006-07-01

    This project was undertaken to ascertain the perceptions of a group of Taiwan's fourth-year bachelor of science in nursing (BSN) students regarding death and help expected from nurses during the dying process. Within the Chinese culture, death is one of the most important life issues. However, in many Chinese societies it is difficult for people to reveal their deepest feelings to their significant others or loved ones. It was in this context that this project was developed because little is known about how Taiwan's nursing students perceive death and the dying process. Using an open-ended, self-report questionnaire, 110 senior BSN students recorded their thoughts on: (1) their fears before physical death; (2) afterlife destinations; and (3) the help they would expect from nurses when dying. The data were analyzed using a three-layer qualitative thematic analysis. The students' reported needs during the dying process were directed towards three main goals: (1) help in reaching the 'triple targets of individual life'; (2) help in facilitating in-depth support so that both the dying person and significant others can experience a blessed farewell; and (3) help in reaching a destination in the afterlife. The results support the belief of dying as a transition occurring when life weans itself from the mortal world and prepares for an afterlife.

  3. Die Face Engineering based Springback Compensation Strategy and Implementation

    NASA Astrophysics Data System (ADS)

    Tang, Arthur; Lee, Wing; He, Jeanne; Xu, Jinbo; Liu, Kesu; Chen, Chin Chun

    2005-08-01

    Springback or shape change has been one of the major challenges in sheet metal fabrication, particularly with increase application of high strength steel (HSS) and aluminum alloys in automotive stamping. Springback, an elastic material recovery after the unloading of stamping tools, causes variations and inconsistencies of final part dimensions. Minor or mild springback usually can be corrected in the re-strike process. Excessive springback must be corrected so the part will be produced within the given design tolerance and dimension. The commonly used Spring Forward approaches and shape compensations such as over-crown and over-bending are proven effective to alleviate excessive springback. To enhance these approaches, a new strategy of Die Face Engineering (DFE) based processing is proposed to quickly and easily to achieve the maximum allowable compensation using the under cut (or die lock) as the primary criteria. The implementation of the die face compensation through iterative FEA calculation, automatic surface mapping, projection and manual morphing are crucial to meet production environment requirements in terms of generating NC quality CAD surfaces of the compensated or morphed die face. In this paper, the strategy of the die face compensation with the consideration of the under cut criteria is presented. The implementation of various processes to enable user to perform the die face compensation task in a production environment is also discussed. Finally, two examples are shown to demonstrate the implementation of the proposed springback compensation scheme based on the combined CAE/CAD methodology.

  4. SiC Die Attach for High-Temperature Applications

    NASA Astrophysics Data System (ADS)

    Drevin-Bazin, A.; Lacroix, F.; Barbot, J.-F.

    2013-11-01

    Eutectic solders AuIn19 and AuGe12 and nanosilver paste were investigated for SiC die attach in high-temperature (300°C) applications. The soldering or sintering conditions were optimized through die shear tests performed at room temperature. In particular, application of static pressure (3.5 MPa) during sintering resulted in greatly improved mechanical behavior of the nanosilver-based joint. Microstructural study of the eutectic solders showed formation of Au-rich grains in AuGe die attach and significant diffusion of Au and In through the Ni layer in AuIn19 die attach, which could lead to formation of intermetallic compounds. Die shear tests versus temperature showed that the behaviors of the studied die attaches are different; nevertheless they present suitable shear strengths required for high-temperature applications. The mechanical behavior of joints under various levels of thermal and mechanical stress was also studied. Creep experiments were carried out on the eutectic solders to describe the thermomechanical behavior of the complete module; only one creep mechanism was observed in the working range.

  5. Herbivory Drives the Spread of Salt Marsh Die-Off

    PubMed Central

    Bertness, Mark D.; Brisson, Caitlin P.; Bevil, Matthew C.; Crotty, Sinead M.

    2014-01-01

    Salt marsh die-off is a Western Atlantic conservation problem that has recently spread into Narragansett Bay, Rhode Island, USA. It has been hypothesized to be driven by: 1) eutrophication decreasing plant investment into belowground biomass causing plant collapse, 2) boat wakes eroding creek banks, 3) pollution or disease affecting plant health, 4) substrate hardness controlling herbivorous crab distributions and 5) trophic dysfunction releasing herbivorous crabs from predator control. To distinguish between these hypotheses we quantified these variables at 14 Narragansett Bay salt marshes where die-off intensity ranged from <5% to nearly 98%. Nitrogen availability, wave intensity and plant growth did not explain any variation in die-off. Herbivory explained 73% of inter-site variation in die-off and predator control of herbivores and substrate hardness also varied significantly with die-off. This suggests that salt marsh die-off is being largely driven by intense herbivory via the release of herbivorous crabs from predator control. Our results and those from other marsh systems suggest that consumer control may not simply be a factor to consider in marsh conservation, but with widespread predator depletion impacting near shore habitats globally, trophic dysfunction and runaway consumption may be the largest and most urgent management challenge for salt marsh conservation. PMID:24651837

  6. Herbivory drives the spread of salt marsh die-off.

    PubMed

    Bertness, Mark D; Brisson, Caitlin P; Bevil, Matthew C; Crotty, Sinead M

    2014-01-01

    Salt marsh die-off is a Western Atlantic conservation problem that has recently spread into Narragansett Bay, Rhode Island, USA. It has been hypothesized to be driven by: 1) eutrophication decreasing plant investment into belowground biomass causing plant collapse, 2) boat wakes eroding creek banks, 3) pollution or disease affecting plant health, 4) substrate hardness controlling herbivorous crab distributions and 5) trophic dysfunction releasing herbivorous crabs from predator control. To distinguish between these hypotheses we quantified these variables at 14 Narragansett Bay salt marshes where die-off intensity ranged from <5% to nearly 98%. Nitrogen availability, wave intensity and plant growth did not explain any variation in die-off. Herbivory explained 73% of inter-site variation in die-off and predator control of herbivores and substrate hardness also varied significantly with die-off. This suggests that salt marsh die-off is being largely driven by intense herbivory via the release of herbivorous crabs from predator control. Our results and those from other marsh systems suggest that consumer control may not simply be a factor to consider in marsh conservation, but with widespread predator depletion impacting near shore habitats globally, trophic dysfunction and runaway consumption may be the largest and most urgent management challenge for salt marsh conservation.

  7. [The traditional and the technological way to die].

    PubMed

    Mendez Baiges, Victor

    2003-12-01

    The process of dying is that which takes a living organism from a state of life to one of death. This process can be adequately described as part of the process and transformation of organic material. But the act of dying for a human being, just as a human being's process of life, is not something merely biological; it also has an element essential in humans: a social aspect. When a human being meets death, various people are involved: the person who dies who is said to leave, who goes somewhere, and those who remain, who perhaps have to help this first person at a moment when that person might require collaboration. Both the person who dies and those who remain must come to terms, must assimilate, the act of dying. All participants in the process of death have to come to grasp with the reality that by this event one of them abandons his/her place in their social relation network. Associated with this radical abandonment, one comes face to face with a tradition which relates this parting with the ideas of a soul, God and immortality. One also faces how to socially organize the process of death, the direct meeting of man with death, which we call the way of dying, as part of this final event in one's life.

  8. Die Face Engineering based Springback Compensation Strategy and Implementation

    SciTech Connect

    Tang, Arthur; Lee Wing; He, Jeanne; Xu Jinbo; Liu Kesu; Chen Chinchun

    2005-08-05

    Springback or shape change has been one of the major challenges in sheet metal fabrication, particularly with increase application of high strength steel (HSS) and aluminum alloys in automotive stamping. Springback, an elastic material recovery after the unloading of stamping tools, causes variations and inconsistencies of final part dimensions. Minor or mild springback usually can be corrected in the re-strike process. Excessive springback must be corrected so the part will be produced within the given design tolerance and dimension. The commonly used Spring Forward approaches and shape compensations such as over-crown and over-bending are proven effective to alleviate excessive springback. To enhance these approaches, a new strategy of Die Face Engineering (DFE) based processing is proposed to quickly and easily to achieve the maximum allowable compensation using the under cut (or die lock) as the primary criteria. The implementation of the die face compensation through iterative FEA calculation, automatic surface mapping, projection and manual morphing are crucial to meet production environment requirements in terms of generating NC quality CAD surfaces of the compensated or morphed die face. In this paper, the strategy of the die face compensation with the consideration of the under cut criteria is presented. The implementation of various processes to enable user to perform the die face compensation task in a production environment is also discussed. Finally, two examples are shown to demonstrate the implementation of the proposed springback compensation scheme based on the combined CAE/CAD methodology.

  9. Implementation of reflected light die-to-die inspection and ReviewSmart to improve 65nm DRAM mask fabrication

    NASA Astrophysics Data System (ADS)

    Kim, Do Young; Cho, Won Il; Park, Jin Hyung; Chung, Dong Hoon; Cha, Byung Chul; Choi, Seong Woon; Han, Woo Sung; Park, Ki Hun; Kim, Nam Wook; Hess, Carl; Ma, Weimin; Kim, David

    2005-11-01

    As the design rule continues to shrink towards 65nm size and beyond the defect criteria are becoming ever more challenging. Pattern fidelity and reticle defects that were once considered as insignificant or nuisance are now becoming significant yield impacting defects. The intent of this study is to utilize the new generation DUV system to compare Die-to-Die Reflected Light inspection and Die-to-Die Transmitted Light Inspection to increase defect detection for optimization of the 65nm node process. In addition, the ReviewSmart will be implemented to help categorically identify systematic tool and process variations and thus allowing user to expedite the learning process to develop a production worthy 65nm node mask process. The learning will be applied to Samsung's pattern inspection strategy, complementing Transmitted Light Inspection, on critical layers of 65 nm node to gain ability to find defects that adversely affect process window.

  10. More great saphenous vein valves - less varicose veins?

    PubMed

    Gräub, Anna-Barbara; Naef, Markus; Wagner, Hans E; Mouton, Wolfgang G

    2014-07-01

    Hintergrund: Die Bedeutung der Anzahl der Venenklappen und derer degenerativen Veränderungen sind bei der Krampfadererkrankungen weder umfassend dokumentiert noch erforscht. Ziel dieser prospektiven Studie ist die quantitative und qualitative Erfassung und Beschreibung der Venenklappen bei Venenerkrankungen der CEAP Stadien C2 bis C6. Patienten und Methoden: Innerhalb von zwei Jahren wurden 152 Patienten (entsprechend 223 Beinen) mit Primäroperation der Vena saphena magna in die Studie eingeschlossen. Bei allen Patienten wurde das CEAP Stadium präoperativ für jedes Bein bestimmt (C2 bis C6). Die Klappen wurden nach der Entfernung der Vena saphena magna quantitativ und qualitativ erfasst. Die qualitative Erfassung erfolgte makroskopisch mittels sechs Klappenerkrankungsklassen (0 bis 5). Ergebnisse: Es bestand eine negative Korrelation zwischen dem Patientenalter und der Anzahl der Klappen (p = 0.0035). Die C-Klasse der CEAP-Einteilung stieg mit zunehmendem Patientenalter. Es fand sich keine statistisch signifikante Korrelation zwischen der Anzahl der Klappen pro Meter und der C-Klasse der CEAP-Einteilung. Bei allen CEAP-Klassen wurden zwischen vier und fünf Klappen pro Meter gezählt. Die Klappenerkrankungsklasse war positiv zur CEAP-Klasse korreliert, wenn auch die Klappenerkrankungsklasse die CEAP-Klasse nie überschritt (p < 0.05). Schlussfolgerungen: Die Venenklappenklasse korreliert in unserer Studie mit der klinischen CEAP-Klasse; die Anzahl der Klappen korreliert nicht mit der klinischen CEAP-Klasse.

  11. BOOK REVIEW: Die Universitäts-Sternwarte München im Wandel ihrer Geschichte

    NASA Astrophysics Data System (ADS)

    Duerbeck, H. W.; Haefner, R.

    2003-01-01

    This concise history of Munich Observatory, written by a staff member, is actually the second, enlarged and updated edition of a brochure that was based on a pair of articles in the now defunct journal Die Sterne (Vol. 68, 263 and 340, 1992). First attempts to establish an observatory in Munich date back to 1759, when the Bavarian Academy of Sciences was founded and a topographic survey was begun; but these private attempts did not lead to a permanent installation. A more official interest arose when a topographic bureau was opened under French direction in 1801, and when the prince-elect Max IV Joseph planned a new land tax which required precise mapping. The collapse of the French rule also meant a collapse of the plans for the new observatory. In 1816, however, things began to develop with an unprecedented speed. The astronomer and surveyor Johann Georg von Soldner was appointed to become observatory director, and king Max I Joseph gave the order to erect the new observatory, which was completed near the end of 1817. The location was chosen near the the village of Bogenhausen (now a suburb of Munich). It took a little longer to install the instrumentation; first observations started in early 1819. Soldner's circle of friends comprised local instrument makers, including Fraunhofer and Reichenbach. With the former, he completed a new apparatus for experiments on the nature of the light of the fixed stars, a refractor of 10 cm aperture equipped with an objective prism. The study of sunlight, began by Fraunhofer, was now extended to the light of planets and fixed stars. Soldner also started a continuous meteorological record. But his name will always be remembered in the annals of science because of a short note, published in 1801 when he was still a student of Bode in Berlin, his On the deviation of a light ray from its rectilinear motion by the attraction of a celestial body which it passes at short distance. Soldner's last years were darkened by illness and

  12. BOOK REVIEW: Die Universitäts-Sternwarte München im Wandel ihrer Geschichte

    NASA Astrophysics Data System (ADS)

    Duerbeck, H. W.; Haefner, R.

    2003-01-01

    This concise history of Munich Observatory, written by a staff member, is actually the second, enlarged and updated edition of a brochure that was based on a pair of articles in the now defunct journal Die Sterne (Vol. 68, 263 and 340, 1992). First attempts to establish an observatory in Munich date back to 1759, when the Bavarian Academy of Sciences was founded and a topographic survey was begun; but these private attempts did not lead to a permanent installation. A more official interest arose when a topographic bureau was opened under French direction in 1801, and when the prince-elect Max IV Joseph planned a new land tax which required precise mapping. The collapse of the French rule also meant a collapse of the plans for the new observatory. In 1816, however, things began to develop with an unprecedented speed. The astronomer and surveyor Johann Georg von Soldner was appointed to become observatory director, and king Max I Joseph gave the order to erect the new observatory, which was completed near the end of 1817. The location was chosen near the the village of Bogenhausen (now a suburb of Munich). It took a little longer to install the instrumentation; first observations started in early 1819. Soldner's circle of friends comprised local instrument makers, including Fraunhofer and Reichenbach. With the former, he completed a new apparatus for experiments on the nature of the light of the fixed stars, a refractor of 10 cm aperture equipped with an objective prism. The study of sunlight, began by Fraunhofer, was now extended to the light of planets and fixed stars. Soldner also started a continuous meteorological record. But his name will always be remembered in the annals of science because of a short note, published in 1801 when he was still a student of Bode in Berlin, his On the deviation of a light ray from its rectilinear motion by the attraction of a celestial body which it passes at short distance. Soldner's last years were darkened by illness and

  13. Grote Reber, Radio Astronomy Pioneer, Dies

    NASA Astrophysics Data System (ADS)

    2002-12-01

    Grote Reber, one of the earliest pioneers of radio astronomy, died in Tasmania on December 20, just two days shy of his 91st birthday. Reber was the first person to build a radio telescope dedicated to astronomy, opening up a whole new "window" on the Universe that eventually produced such landmark discoveries as quasars, pulsars and the remnant "afterglow" of the Big Bang. His self- financed experiments laid the foundation for today's advanced radio-astronomy facilities. Grote Reber Grote Reber NRAO/AUI photo "Radio astronomy has changed profoundly our understanding of the Universe and has earned the Nobel Prize for several major contributions. All radio astronomers who have followed him owe Grote Reber a deep debt for his pioneering work," said Dr. Fred Lo, director of the National Radio Astronomy Observatory (NRAO). "Reber was the first to systematically study the sky by observing something other than visible light. This gave astronomy a whole new view of the Universe. The continuing importance of new ways of looking at the Universe is emphasized by this year's Nobel Prizes in physics, which recognized scientists who pioneered X-ray and neutrino observations," Lo added. Reber was a radio engineer and avid amateur "ham" radio operator in Wheaton, Illinois, in the 1930s when he read about Karl Jansky's 1932 discovery of natural radio emissions coming from outer space. As an amateur operator, Reber had won awards and communicated with other amateurs around the world, and later wrote that he had concluded "there were no more worlds to conquer" in radio. Learning of Jansky's discovery gave Reber a whole new challenge that he attacked with vigor. Analyzing the problem as an engineer, Reber concluded that what he needed was a parabolic-dish antenna, something quite uncommon in the 1930s. In 1937, using his own funds, he constructed a 31.4-foot-diameter dish antenna in his back yard. The strange contraption attracted curious attention from his neighbors and became

  14. Celestial paleontology: The legacy of dying stars

    NASA Astrophysics Data System (ADS)

    Hart, Alexa H.

    2013-03-01

    In their death throes, stars dole out their atmospheric material to the interstellar medium in dramatic stellar winds and spectacular explosions. The details of this profound metamorphosis, from star to remnant, play a key role in the next generation of star formation as well as the energetic and chemical evolution of galaxies and the universe as a whole. Dying stars are thought to be the source of all of the nuclei heavier than iron in the universe, as well as more complex molecules, such as carbon chains, which form the backbone of life as we know it. High mass Wolf-Rayet stars are likely progenitors of many types of Supernova, yet due to observational constraints we lack the most basic information about most of them: rather they are part of binary systems. This information is key to the determination of rather or not these stars will go supernova, since depending on its nature the companion can either draw mass off the Wolf-Rayet star, effectively quenching the march to explosion, or feed material onto the Wolf-Rayet star, speeding its demise as a supernova. Models of galactic evolution depend sensitively on the frequency of supernova for several reasons: they inject a great deal of energy into the Interstellar medium, they are the only known producers of nuclei heavier than nickel, and the shock waves that they create can stimulate star formation. In turn, the energy generated by supernova explosions drives the galactic wind, the heavier elements now present in the Interstellar Medium increase the efficiency of star formation, and the groups of new stars formed in the wake of a shock are thought to lead to the development of spiral arms in galaxies. In addition, because high mass stars are so short-lived, they can cycle through hundreds of generations in the time it takes one solar-type star's to evolve. Though intermediate mass stars merely fizzle out in comparison, they are pivotal to the evolution of the universe because they make up over 97% of the stars

  15. Exciting Message from a Dying Monster Star

    NASA Astrophysics Data System (ADS)

    1996-03-01

    this is radiation from a SiO maser in the atmosphere of the star. If it would not have been a maser, it would have been far too weak to have been detected. Although we know several hundred masers of this type in the Milky Way, this is the first discovery of a SiO maser in another galaxy than our own . Since then, the observations have been continued in collaboration with Australian astronomers, using radio telescopes at Parkes and Mopra on that continent. A most unusual star When Swedish astronomer Bengt Westerlund and his colleagues first observed this LMC maser star in 1981 with optical telescopes, they thought that it was a rather normal, cool and not particularly bright star. However, a few years later, the Dutch-British-USA InfraRed Astronomical Satellite (IRAS) revealed its true nature. The IRAS measurements showed that the star radiates most of its light in the form of infrared radiation [4], making it one of the most powerful stars in the LMC; in fact, it emits about half a million times more energy than the Sun. On this occasion, it was given the designation IRAS 04553-6825 , the number indicating its position in the sky. IRAS 04553-6825 is unusual in other ways. It is some fifty times as heavy as our Sun, and it is the biggest known star in the LMC: if it were to take the place of our Sun, it would fill the solar system out to the planet Neptune, thirty times the distance from the Earth to the Sun. It is rather cool when compared to other stars - although it still has a temperature of about 2,000 C - and it therefore has a very red colour [5]. This Press Release is accompanied by ESO Press Photo 15/96 which demonstrates that while the star is hardly visible in blue light, it shines brightly in red and infrared light. Stars like IRAS 04553-6825 are known as red supergiants. It has been unofficially dubbed `The Monster', and having reached the end of a short and hectic life, it is now dying. The nuclear reactions deep inside are undergoing important changes at

  16. The role of surface disinfection in infection prevention.

    PubMed

    Gebel, Jürgen; Exner, Martin; French, Gary; Chartier, Yves; Christiansen, Bärbel; Gemein, Stefanie; Goroncy-Bermes, Peter; Hartemann, Philippe; Heudorf, Ursel; Kramer, Axel; Maillard, Jean-Yves; Oltmanns, Peter; Rotter, Manfred; Sonntag, Hans-Günther

    2013-01-01

    Hintergrund: Die Rudolf-Schülke-Stiftung unterstützt die Forschung und Entwicklung von Strategien zur Hygiene, Infektionsprävention und Öffentlichen Gesundheit. In diesem Rahmen diskutierten Fachleute aus mehreren europäischen Staaten im Rahmen eines Arbeitsgesprächs den „Stellenwert der Flächendesinfektion in der Infektionsprävention“. Die wichtigsten Ergebnisse und Schlussfolgerungen aus diesem Arbeitsgespräch sind im folgenden Konsensuspapier zusammengefasst.Zielsetzung: Wenngleich die Bedeutung der Flächendesinfektion in den letzten Jahren gestiegen ist, gibt es noch eine Reihe von Themen, die kontrovers diskutiert werden. Im Einzelnen sind dies: die Übertragung von Mikroorganismen von der Fläche auf Patienten als Infektionsursache, Anforderungen an Flächendesinfektionsmittel, Resistenz und Toxizität von Bioziden, zukünftige Strategien.Methode und Ergebnisse: Nach Diskussion und Sichtung der aktuellen wissenschaftlichen Literatur steht für die Autoren zweifelsfrei fest, dass pathogene Mikroorganismen über kontaminierte Oberflächen übertragen werden und Flächen somit ein Infektionsrisiko darstellen können. Gezielte Flächendesinfektion auf der Grundlage eines Risikoprofils ist als ein fester Bestandteil eines Multibarriereansatzes der allgemein anzuwendenden Schutzmaßnahmen zur Infektionsprävention anzusehen. Resistenzen und Kreuzresistenzen hängen sowohl vom einzelnen Desinfektionswirkstoff als auch vom jeweiligen Mikroorganismus ab. Darüber hinaus kann die sachgerechte Umsetzung von geprüften Maßnahmen zur Flächendesinfektion negative Auswirkungen verhindern oder minimieren.Schlussfolgerungen: Die Desinfektion muss als Prozess betrachtet werden. Es sollten Standards für die Reinigung und Desinfektion erarbeitet werden und die sachgerechte Umsetzung dieser Maßnahmen durch schriftlich fixierte Standardarbeitsanweisungen, fundierte Aus-, Fort- und Weiterbildung und geeignete Auditsysteme sichergestellt werden. Zusätzlich m

  17. 78 FR 61948 - Culturally Significant Objects Imported for Exhibition Determinations: “Franz von Stuck”

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-07

    ... Culturally Significant Objects Imported for Exhibition Determinations: ``Franz von Stuck'' SUMMARY: Notice is..., I hereby determine that the objects to be included in the exhibition ``Franz von Stuck,'' imported... objects are imported pursuant to loan agreements with the foreign owners or custodians. I also...

  18. 76 FR 36166 - Culturally Significant Objects Imported for Exhibition; Determinations: “Gabriel von Max: Be...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-21

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF STATE Culturally Significant Objects Imported for Exhibition; Determinations: ``Gabriel von Max: Be-Tailed Cousins... the exhibition ``Gabriel von Max: Be-Tailed Cousins and Phantasms of the Soul,'' imported from...

  19. The Fate of Western Civilization: G. H. von Wright's Reflections on Science, Technology, and Global Society

    ERIC Educational Resources Information Center

    Heikkero, Topi

    2004-01-01

    This article introduces the central ideas of G. H. von Wright's cultural philosophy concerning the techno-scientific form of life. Georg Henrik von Wright (1916-2003) was best known for his achievements in the field of modal logic and for his association with Ludwig Wittgenstein. However, his work also included a critical analysis of science and…

  20. Spin torque oscillator neuroanalog of von Neumann's microwave computer.

    PubMed

    Hoppensteadt, Frank

    2015-10-01

    Frequency and phase of neural activity play important roles in the behaving brain. The emerging understanding of these roles has been informed by the design of analog devices that have been important to neuroscience, among them the neuroanalog computer developed by O. Schmitt and A. Hodgkin in the 1930s. Later J. von Neumann, in a search for high performance computing using microwaves, invented a logic machine based on crystal diodes that can perform logic functions including binary arithmetic. Described here is an embodiment of his machine using nano-magnetics. Electrical currents through point contacts on a ferromagnetic thin film can create oscillations in the magnetization of the film. Under natural conditions these properties of a ferromagnetic thin film may be described by a nonlinear Schrödinger equation for the film's magnetization. Radiating solutions of this system are referred to as spin waves, and communication within the film may be by spin waves or by directed graphs of electrical connections. It is shown here how to formulate a STO logic machine, and by computer simulation how this machine can perform several computations simultaneously using multiplexing of inputs, that this system can evaluate iterated logic functions, and that spin waves may communicate frequency, phase and binary information. Neural tissue and the Schmitt-Hodgkin, von Neumann and STO devices share a common bifurcation structure, although these systems operate on vastly different space and time scales; namely, all may exhibit Andronov-Hopf bifurcations. This suggests that neural circuits may be capable of the computational functionality as described by von Neumann.