Remote sensing study of the impact of vegetation on thermal environment in different contexts

NASA Astrophysics Data System (ADS)

Xie, Qijiao; Wu, Yingjiao; Zhou, Zhixiang; Wang, Zhengxiang

2018-02-01

Satellite remote sensing technology provides informative data for detecting the land surface temperature (LST) distribution and urban heat island (UHI) effect remotely and regionally. In this study, two Landsat Thematic Mapper (TM) images acquired on September 26, 1987 and September 17, 2013 were used to derive LST and the normalized difference vegetation index (NDVI) values in Wuhan, China. The relationships between NDVI and LST were examined in different contexts, namely built-up area, farmland, grassland and forest. Results showed that negative correlations between the mean NDVI and LST were detected in all observed land covers, which meant that vegetation was efficient in decreasing surface temperatures and mitigating UHI effect. The cooling efficiency of vegetation on thermal environment varied with different contexts. As mean NDVI increased at each 0.1, the decreased LST values in built-up area, farmland, grassland and forest were 1.4 °C, 1.4 °C, 1.1 °C, 1.9 °C in 1987 and 1.4 °C, 1.7 °C, 1.3 °C, 1.8 °C in 2013, respectively. This finding encourages urban planners and greening designers to devote more efforts in protecting urban forests.

Comparison Between Spectral, Spatial and Polarimetric Classification of Urban and Periurban Landcover Using Temporal Sentinel - 1 Images

NASA Astrophysics Data System (ADS)

Roychowdhury, K.

2016-06-01

Landcover is the easiest detectable indicator of human interventions on land. Urban and peri-urban areas present a complex combination of landcover, which makes classification challenging. This paper assesses the different methods of classifying landcover using dual polarimetric Sentinel-1 data collected during monsoon (July) and winter (December) months of 2015. Four broad landcover classes such as built up areas, water bodies and wetlands, vegetation and open spaces of Kolkata and its surrounding regions were identified. Polarimetric analyses were conducted on Single Look Complex (SLC) data of the region while ground range detected (GRD) data were used for spectral and spatial classification. Unsupervised classification by means of K-Means clustering used backscatter values and was able to identify homogenous landcovers over the study area. The results produced an overall accuracy of less than 50% for both the seasons. Higher classification accuracy (around 70%) was achieved by adding texture variables as inputs along with the backscatter values. However, the accuracy of classification increased significantly with polarimetric analyses. The overall accuracy was around 80% in Wishart H-A-Alpha unsupervised classification. The method was useful in identifying urban areas due to their double-bounce scattering and vegetated areas, which have more random scattering. Normalized Difference Built-up index (NDBI) and Normalized Difference Vegetation Index (NDVI) obtained from Landsat 8 data over the study area were used to verify vegetation and urban classes. The study compares the accuracies of different methods of classifying landcover using medium resolution SAR data in a complex urban area and suggests that polarimetric analyses present the most accurate results for urban and suburban areas.

The effects of green areas on air surface temperature of the Kuala Lumpur city using WRF-ARW modelling and Remote Sensing technique

NASA Astrophysics Data System (ADS)

Isa, N. A.; Mohd, W. M. N. Wan; Salleh, S. A.; Ooi, M. C. G.

2018-02-01

Matured trees contain high concentration of chlorophyll that encourages the process of photosynthesis. This process produces oxygen as a by-product and releases it into the atmosphere and helps in lowering the ambient temperature. This study attempts to analyse the effect of green area on air surface temperature of the Kuala Lumpur city. The air surface temperatures of two different dates which are, in March 2006 and March 2016 were simulated using the Weather Research and Forecasting (WRF) model. The green area in the city was extracted using the Normalized Difference Vegetation Index (NDVI) from two Landsat satellite images. The relationship between the air surface temperature and the green area were analysed using linear regression models. From the study, it was found that, the green area was significantly affecting the distribution of air temperature within the city. A strong negative correlation was identified through this study which indicated that higher NDVI values tend to have lower air surface temperature distribution within the focus study area. It was also found that, different urban setting in mixed built-up and vegetated areas resulted in different distributions of air surface temperature. Future studies should focus on analysing the air surface temperature within the area of mixed built-up and vegetated area.

The adaption of coal quality to furnace structure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Z.; Shun, X.

1996-12-31

This paper gives the research result of coal quality adaption to furnace structure. The designing of a furnace is based on the coal quality that the furnace would fire. If the coal fired in the furnace differs from the design coal, there would be a lot of problems such as flame stability, coal burn-out rate and slagging problem for the furnace during its operation. In order to know the adaptional range of coal quality for an existing furnace the authors had chosen three different furnaces and 18 kinds of coals in their research work. To understand the coal combustion characteristicsmore » they introduce different indexes to show different processes of coal combustion. These indexes include Fz index which demonstrates the coal combustion based on its utility analyzed result, flame stability index, combustion characteristic index and char burn-out index which are based on the analyzed result of thermogravimetric characteristic. As a furnace is built up and set into operation its flame stability, burn-out rate and ash deposition are definite. If a furnace`s fuel changes its structure characteristics and operation condition will change. A relation between coal quality to furnace structure is based on a lot of regressional analysis results of existing furnaces and their fuels. Based on this relation the adaption of coal quality for a furnace are defined and the kinds of coal furnace fired are optimized to its design fuel.« less

[Research on developping the spectral dataset for Dunhuang typical colors based on color constancy].

PubMed

Liu, Qiang; Wan, Xiao-Xia; Liu, Zhen; Li, Chan; Liang, Jin-Xing

2013-11-01

The present paper aims at developping a method to reasonably set up the typical spectral color dataset for different kinds of Chinese cultural heritage in color rendering process. The world famous wall paintings dating from more than 1700 years ago in Dunhuang Mogao Grottoes was taken as typical case in this research. In order to maintain the color constancy during the color rendering workflow of Dunhuang culture relics, a chromatic adaptation based method for developping the spectral dataset of typical colors for those wall paintings was proposed from the view point of human vision perception ability. Under the help and guidance of researchers in the art-research institution and protection-research institution of Dunhuang Academy and according to the existing research achievement of Dunhuang Research in the past years, 48 typical known Dunhuang pigments were chosen and 240 representative color samples were made with reflective spectral ranging from 360 to 750 nm was acquired by a spectrometer. In order to find the typical colors of the above mentioned color samples, the original dataset was devided into several subgroups by clustering analysis. The grouping number, together with the most typical samples for each subgroup which made up the firstly built typical color dataset, was determined by wilcoxon signed rank test according to the color inconstancy index comprehensively calculated under 6 typical illuminating conditions. Considering the completeness of gamut of Dunhuang wall paintings, 8 complementary colors was determined and finally the typical spectral color dataset was built up which contains 100 representative spectral colors. The analytical calculating results show that the median color inconstancy index of the built dataset in 99% confidence level by wilcoxon signed rank test was 3.28 and the 100 colors are distributing in the whole gamut uniformly, which ensures that this dataset can provide reasonable reference for choosing the color with highest color constancy during the color rendering process of Dunhuang cultural heritage.

Effect of land cover and green space on land surface temperature of a fast growing economic region in Malaysia

NASA Astrophysics Data System (ADS)

Sheikhi, A.; Kanniah, K. D.; Ho, C. H.

2015-10-01

Green space must be increased in the development of new cities as green space can moderate temperature in the cities. In this study we estimated the land surface temperature (LST) and established relationships between LST and land cover and various vegetation and urban surface indices in the Iskandar Malaysia (IM) region. IM is one of the emerging economic gateways of Malaysia, and is envisaged to transform into a metropolis by 2025. This change may cause increased temperature in IM and therefore we conducted a study by using Landsat 5 image covering the study region (2,217 km2) to estimate LST, classify different land covers and calculate spectral indices. Results show that urban surface had highest LST (24.49 °C) and the lowest temperature was recorded in, forest, rubber and water bodies ( 20.69 to 21.02°C). Oil palm plantations showed intermediate mean LST values with 21.65 °C. We further investigated the relationship between vegetation and build up densities with temperature. We extracted 1000 collocated pure pixels of Normalized Difference Vegetation Index (NDVI), Normalized Difference Water Index (NDWI), Normalized Difference Built-up Index (NDBI), Urban Index (UI) and LST in the study area. Results show a strong and significant negative correlation with (R2= -0.74 and -0.79) respectively between NDVI, NDWI and LST . Meanwhile a strong positive correlation (R2=0.8 and 0.86) exists between NDBI, UI and LST. These results show the importance of increasing green cover in urban environment to combat any adverse effects of climate change.

Built environment change and change in BMI and waist circumference: Multi-ethnic Study of Atherosclerosis.

PubMed

Hirsch, Jana A; Moore, Kari A; Barrientos-Gutierrez, Tonatiuh; Brines, Shannon J; Zagorski, Melissa A; Rodriguez, Daniel A; Diez Roux, Ana V

2014-11-01

To examine longitudinal associations of the neighborhood built environment with objectively measured body mass index (BMI) and waist circumference (WC) in a geographically and racial/ethnically diverse group of adults. This study used data from 5,506 adult participants in the Multi-Ethnic Study of Atherosclerosis, aged 45-84 years in 2000 (baseline). BMI and WC were assessed at baseline and four follow-up visits (median follow-up 9.1 years). Time-varying built environment measures (population density, land-use, destinations, bus access, and street characteristics) were created using Geographic Information Systems. Principal components analysis was used to derive composite scores for three built environment factors. Fixed-effects models, tightly controlling for all time-invariant characteristics, estimated associations between change in the built environment, and change in BMI and WC. Increases in the intensity of development (higher density of walking destinations and population density, and lower percent residential) were associated with less pronounced increases or decreases over time in BMI and WC. Changes in connected retail centers (higher percent retail, higher street connectivity) and public transportation (distance to bus) were not associated with changes in BMI or WC. Longitudinal changes in the built environment, particularly increased density, are associated with decreases in BMI and WC. © 2014 The Obesity Society.

The changing patterns of cropland conversion to built-up land in China from 1987 to 2010

NASA Astrophysics Data System (ADS)

Ju, H.; Zhang, Z.; Zhao, X.; Wu, W.; Wang, X.; Zuo, L.

2017-12-01

With the rapid urbanization, industrialization and rural area construction in China, the expansions of built-up land encroached upon a large amount of cropland, and thus placed great challenges on national food security. Previous studies have primarily been focused on the whole effects of built-up land expansion, however, the individual effect of different types of built-up land (urban areas, rural settlements and industrial/transportation land) on cropland loss remains unclear. Based on land use maps interpreted from remote sensing imagery in 1987-2010, we illustrated the spatio-temporal patterns of the speed and the structure of cropland conversion to built-up land. Then, we quantitatively measured the influence of different built-up land on cropland loss from three aspects: the contribution of built-up land expansion to cropland loss, the dependence of built-up land expansion on cropland loss and the conversion's impacts on cropland quality. It was found 42,822 km2 of cropland were converted into built-up land in China, accounting for 43.8% of total cropland loss during 1987-2010. Before 2000, the expansion of rural settlements had the largest influence on cropland loss, however, urban growth showed a greater impact on cropland loss after 2000. Although the effects of rural settlements expansion decreased, rural settlements still saw the highest percentage of the loss of traditional cropland which is generally in high quality. In addition, the impacts of industrial/transportation land expansion increased dramatically and was mainly distributed in major food production regions. These changes were closely related to the economic restructuring, urban-rural transformation and government policies in China. These findings demonstrate that Chinese cropland conservation in both amount and quality should focus not only on finding a reasonable urbanization mode, but also solving the "hollowing village" problem and balancing the industrial transformations in the future.

Built-Up Area Detection from High-Resolution Satellite Images Using Multi-Scale Wavelet Transform and Local Spatial Statistics

NASA Astrophysics Data System (ADS)

Chen, Y.; Zhang, Y.; Gao, J.; Yuan, Y.; Lv, Z.

2018-04-01

Recently, built-up area detection from high-resolution satellite images (HRSI) has attracted increasing attention because HRSI can provide more detailed object information. In this paper, multi-resolution wavelet transform and local spatial autocorrelation statistic are introduced to model the spatial patterns of built-up areas. First, the input image is decomposed into high- and low-frequency subbands by wavelet transform at three levels. Then the high-frequency detail information in three directions (horizontal, vertical and diagonal) are extracted followed by a maximization operation to integrate the information in all directions. Afterward, a cross-scale operation is implemented to fuse different levels of information. Finally, local spatial autocorrelation statistic is introduced to enhance the saliency of built-up features and an adaptive threshold algorithm is used to achieve the detection of built-up areas. Experiments are conducted on ZY-3 and Quickbird panchromatic satellite images, and the results show that the proposed method is very effective for built-up area detection.

Landcover change and light pollution in Kota Bandarlampung

NASA Astrophysics Data System (ADS)

Rohman, Akmal F.; Hafidz, Muhammad; Hazairin, Azra Q.; Riadini, Fitri

2016-10-01

Excessive emission of light or light pollution at night is one of the elements of environmental pollution. Indirectly light pollution causes increase of fossil fuel use, greenhouse gasses and pollution in the atmosphere. Direct effects of light pollution including: disturbance of animals life, human's psychology and environmental degradation. Light pollution in an area is related with the existence of built-up area and the lack of vegetation as a manifestation of economic and population growth. This research aims to know the relation of land cover changes with light pollution in Bandar Lampung and surrounding with 40 km radius over the last ten years. This research used satellite imagery to obtained data and later does the verification and accuracy tests on the field. The variables used in this research include light pollution radiance value, percentages in the built-up area and vegetation density. Light pollution radiance value is obtained from DMSP-OLS Version 4 satellite images, while the changes of built up and vegetation density data obtained from NDBI dan NDVI from Landsat 8 satellite images. The research area is divided into a grid with a size of 30"×30" which is the same as spatial resolution of DMSP. From sample grids, regression analysis between the percentage of light pollution radiance value with the percentage of NDVI and NDBI index on each grids. The percentages of built up areas and vegetation has 58 % of fair correlation with light emission.

The potential benefits of location-specific biometeorological indexes

NASA Astrophysics Data System (ADS)

Wong, Ho Ting; Wang, Jinfeng; Yin, Qian; Chen, Si; Lai, Poh Chin

2017-09-01

It is becoming popular to use biometeorological indexes to study the effects of weather on human health. Most of the biometeorological indexes were developed decades ago and only applicable to certain locations because of different climate types. Merely using standard biometeorological indexes to replace typical weather factors in biometeorological studies of different locations may not be an ideal research direction. This research is aimed at assessing the difference of statistical power between using standard biometeorological indexes and typical weather factors on describing the effects of extreme weather conditions on daily ambulance demands in Hong Kong. Results showed that net effective temperature and apparent temperature did not perform better than typical weather factors in describing daily ambulance demands in this study. The maximum adj- R 2 improvement was only 0.08, whereas the maximum adj- R 2 deterioration was 0.07. In this study, biometeorological indexes did not perform better than typical weather factors, possibly due to the differences of built environments and lifestyles in different locations and eras. Regarding built environments, the original parameters for calculating the index values may not be applicable to Hong Kong as buildings in Hong Kong are extremely dense and most are equipped with air conditioners. Regarding lifestyles, the parameters, which were set decades ago, may be outdated and not suitable to modern lifestyles as using hand-held electrical fans on the street to help reduce heat stress are popular. Hence, it is ideal to have tailor-made updated location-specific biometeorological indexes to study the effects of weather on human health.

Ultimate Strength of Ferro-Geopolymer Composite Built-Up I Joist

NASA Astrophysics Data System (ADS)

Vipin, K. T.; Ganesan, N.; Indira, P. V.

2017-07-01

An experimental study was carried out to study the behaviour of ferro-geopolymer built-up I- joist with different types of mesh reinforcements under flexure. Mesh reinforcements considered in this study are square welded meshes, square woven meshes and hexagonal meshes. First crack load as well as ultimate strength of ferro-geopolymer built-up I-joist in flexure was obtained. An attempt was made to predict the first crack load and ultimate moment capacity of the specimen.

Spatiotemporal Changes of Built-Up Land Expansion and Carbon Emissions Caused by the Chinese Construction Industry.

PubMed

Chuai, Xiaowei; Huang, Xianjin; Lu, Qinli; Zhang, Mei; Zhao, Rongqin; Lu, Junyu

2015-11-03

China is undergoing rapid urbanization, enlarging the construction industry, greatly expanding built-up land, and generating substantial carbon emissions. We calculated both the direct and indirect carbon emissions from energy consumption (anthropogenic emissions) in the construction sector and analyzed built-up land expansion and carbon storage losses from the terrestrial ecosystem. According to our study, the total anthropogenic carbon emissions from the construction sector increased from 3,905×10(4) to 103,721.17×10(4) t from 1995 to 2010, representing 27.87%-34.31% of the total carbon emissions from energy consumption in China. Indirect carbon emissions from other industrial sectors induced by the construction sector represented approximately 97% of the total anthropogenic carbon emissions of the sector. These emissions were mainly concentrated in seven upstream industry sectors. Based on our assumptions, built-up land expansion caused 3704.84×10(4) t of carbon storage loss from vegetation between 1995 and 2010. Cropland was the main built-up land expansion type across all regions. The study shows great regional differences. Coastal regions showed dramatic built-up land expansion, greater carbon storage losses from vegetation, and greater anthropogenic carbon emissions. These regional differences were the most obvious in East China followed by Midsouth China. These regions are under pressure for strong carbon emissions reduction.

Urban biophysical composition and its impact on thermal changes and ecosystem production

NASA Astrophysics Data System (ADS)

Sannigrahi, Srikanta; Rahmat, Shahid; Bhatt, Sandeep

2017-04-01

Human driving forces, especially, urbanization, population pressure, and socioeconomic development are significantly changing the efficiency of ecosystem service provision in an urban ecosystem. Greater Hyderabad Municipal Corporation (GHMC) is the sixth largest urban metropolitan region in India had faced an alarming pace of urban expansion from 1973 to 2015. MODerate Resolution Imaging Spectroradiometer (MODIS) thermal products MOD11A2 and surface reflectance products MOD09A1 were employed in this work to simulate areal and temporal dynamics of Urban Heat Island (UHI) and Diurnal Temperature Range (DTR) of the GHMC region from 2002 to 2015. A Light Use Efficiency (LUE) based Vegetation Photosynthesis Model (VPM) was adopted in this work to quantify Net Primary Production (NPP) and to assess the spatiotemporal changes of NPP during 2002 to 2015. MODIS yearly NPP products MOD17A3 were applied here for the purpose of model validation. Linear Spectral Mixture Analysis (LSMA) technique was employed in this research to generate impervious surface fraction image of GHMC. Spatially explicit gas regulation service included as a regulatory ecosystem service to assess the trade-off between economic viability and ecosystem conservation. Acute urban expansion (over 200%) is mainly accounted to changes the Land Surface Temperature (LST) over 3°C to 4°C in the inner city region during 1991 to 2015. Surface vegetation and moisture dynamics have been evaluated by incorporating Normalized Difference Vegetation Index (NDVI), Normalized Difference Built-up Index (NDBI), Normalized Difference Bareness Index (NDBaI) and Land Surface Water Index (LSWI) for the year of 2002, 2011 and 2015, respectively. The four distinct UHI cluster, i.e. H-H, H-L, L-H & L-L were retrieved from the segmentation of estimated LST using Local Indicators Spatial Autocorrelation (LISA) technique. Further, the Getis-Ord-Gi hotspot analysis method has been employed to identify the local proximity of spatial hot and cold UHI clusters. The areal coverage of built-up urban class was changed from 208.11sq.km in 1973 to 419.55 sq.km in 2015 with 5.03 sq.km/year expansion rate. The selected biophysical indices are found highly sensitive to the changes in land use and land cover (LULC). LST hotspot (H-H) in 2002 was observed in the central and the southeast portion of the region due to the presence of higher thermal anomalies and high concentration of LST (°C). The Island (H-L) part of the city was mostly covered by the built-up urban area in 2002 exhibiting the highest concentration of LST, whereas the mean LST (°C) of the neighboring region is below than the average. GiZScore with low standard deviation value proven the existence of active hotspot of LST and UHI over the central urbanized area in GHMC.A strong negative correlation has found between the selected human driving forces: UHI, LST, population density, settlement density and impervious fraction with NPP ensembles the facts of human control in an urban ecosystem. This study demonstrated the necessity of proper quantification and valuation of urban ecosystem services to achieve effective and efficient decision for urban ecosystem management.

Urban green and grey space in relation to respiratory health in children.

PubMed

Tischer, Christina; Gascon, Mireia; Fernández-Somoano, Ana; Tardón, Adonina; Lertxundi Materola, Aitana; Ibarluzea, Jesus; Ferrero, Amparo; Estarlich, Marisa; Cirach, Marta; Vrijheid, Martine; Fuertes, Elaine; Dalmau-Bueno, Albert; Nieuwenhuijsen, Mark J; Antó, Josep M; Sunyer, Jordi; Dadvand, Payam

2017-06-01

We assessed the effect of three different indices of urban built environment on allergic and respiratory conditions.This study involved 2472 children participating in the ongoing INMA birth cohort located in two bio-geographic regions (Euro-Siberian and Mediterranean) in Spain. Residential surrounding built environment was characterised as 1) residential surrounding greenness based on satellite-derived normalised difference vegetation index (NDVI), 2) residential proximity to green spaces and 3) residential surrounding greyness based on urban land use patterns. Information on wheezing, bronchitis, asthma and allergic rhinitis up to age 4 years was obtained from parent-completed questionnaires. Logistic regression and generalised estimating equation modelling were performed.Among children from the Euro-Siberian region, higher residential surrounding greenness and higher proximity to green spaces were negatively associated with wheezing. In the Mediterranean region, higher residential proximity to green spaces was associated with a reduced risk for bronchitis. A higher amount of residential surrounding greyness was found to increase the risk for bronchitis in this region.Associations between indices of urban residential greenness and greyness with respiratory diseases differ by region. The pathways underlying these associations require further exploration. Copyright ©ERS 2017.

a New Multi-Spectral Threshold Normalized Difference Water Index Mst-Ndwi Water Extraction Method - a Case Study in Yanhe Watershed

NASA Astrophysics Data System (ADS)

Zhou, Y.; Zhao, H.; Hao, H.; Wang, C.

2018-05-01

Accurate remote sensing water extraction is one of the primary tasks of watershed ecological environment study. Since the Yanhe water system has typical characteristics of a small water volume and narrow river channel, which leads to the difficulty for conventional water extraction methods such as Normalized Difference Water Index (NDWI). A new Multi-Spectral Threshold segmentation of the NDWI (MST-NDWI) water extraction method is proposed to achieve the accurate water extraction in Yanhe watershed. In the MST-NDWI method, the spectral characteristics of water bodies and typical backgrounds on the Landsat/TM images have been evaluated in Yanhe watershed. The multi-spectral thresholds (TM1, TM4, TM5) based on maximum-likelihood have been utilized before NDWI water extraction to realize segmentation for a division of built-up lands and small linear rivers. With the proposed method, a water map is extracted from the Landsat/TM images in 2010 in China. An accuracy assessment is conducted to compare the proposed method with the conventional water indexes such as NDWI, Modified NDWI (MNDWI), Enhanced Water Index (EWI), and Automated Water Extraction Index (AWEI). The result shows that the MST-NDWI method generates better water extraction accuracy in Yanhe watershed and can effectively diminish the confusing background objects compared to the conventional water indexes. The MST-NDWI method integrates NDWI and Multi-Spectral Threshold segmentation algorithms, with richer valuable information and remarkable results in accurate water extraction in Yanhe watershed.

Impact of Policy and Built Environment Changes on Obesity-related Outcomes: A Systematic Review of Naturally-Occurring Experiments

PubMed Central

Mayne, Stephanie L.; Auchincloss, Amy H.; Michael, Yvonne L.

2016-01-01

Policies and changes to the built environment are promising targets for obesity prevention efforts and can be evaluated as “natural”- or “quasi”-experiments. This systematic review examined the use of natural- or quasi-experiments to evaluate the efficacy of policy and built environment changes on obesity-related outcomes (body mass index, diet, or physical activity). PubMed (Medline) was searched for studies published 2005–2013; 1,175 abstracts and 115 articles were reviewed. Of the 37 studies included, 18 studies evaluated impacts on nutrition/diet, 17 on physical activity, and 3 on body mass index. Nutrition-related studies found greater effects due to bans/restrictions on unhealthy foods, mandates offering healthier foods, and altering purchase/payment rules on foods purchased using low-income food vouchers compared to other interventions (menu labeling, new supermarkets). Physical activity-related studies generally found stronger impacts when the intervention involved improvements to active transportation infrastructure, longer follow-up time, or measured process outcomes (e.g., cycling rather than total physical activity) compared to other studies. Only three studies directly assessed body mass index or weight, and only one (installing light-rail system) observed a significant effect. Studies varied widely in the strength of their design and studies with weaker designs were more likely to report associations in the positive direction. PMID:25753170

Effects of Buffer Size and Shape on Associations between the Built Environment and Energy Balance

PubMed Central

Berrigan, David; Hart, Jaime E.; Hipp, J. Aaron; Hoehner, Christine M.; Kerr, Jacqueline; Major, Jacqueline M.; Oka, Masayoshi; Laden, Francine

2014-01-01

Uncertainty in the relevant spatial context may drive heterogeneity in findings on the built environment and energy balance. To estimate the effect of this uncertainty, we conducted a sensitivity analysis defining intersection and business densities and counts within different buffer sizes and shapes on associations with self-reported walking and body mass index. Linear regression results indicated that the scale and shape of buffers influenced study results and may partly explain the inconsistent findings in the built environment and energy balance literature. PMID:24607875

Effects of Land Use/Cover Changes and Urban Forest Configuration on Urban Heat Islands in a Loess Hilly Region: Case Study Based on Yan'an City, China.

PubMed

Zhang, Xinping; Wang, Dexiang; Hao, Hongke; Zhang, Fangfang; Hu, Youning

2017-07-26

In this study Yan'an City, a typical hilly valley city, was considered as the study area in order to explain the relationships between the surface urban heat island (SUHI) and land use/land cover (LULC) types, the landscape pattern metrics of LULC types and land surface temperature (LST) and remote sensing indexes were retrieved from Landsat data during 1990-2015, and to find factors contributed to the green space cool island intensity (GSCI) through field measurements of 34 green spaces. The results showed that during 1990-2015, because of local anthropogenic activities, SUHI was mainly located in lower vegetation cover areas. There was a significant suburban-urban gradient in the average LST, as well as its heterogeneity and fluctuations. Six landscape metrics comprising the fractal dimension index, percentage of landscape, aggregation index, division index, Shannon's diversity index, and expansion intensity of the classified LST spatiotemporal changes were paralleled to LULC changes, especially for construction land, during the past 25 years. In the urban area, an index-based built-up index was the key positive factor for explaining LST increases, whereas the normalized difference vegetation index and modified normalized difference water index were crucial factors for explaining LST decreases during the study periods. In terms of the heat mitigation performance of green spaces, mixed forest was better than pure forest, and the urban forest configuration had positive effects on GSCI. The results of this study provide insights into the importance of species choice and the spatial design of green spaces for cooling the environment.

Effects of Land Use/Cover Changes and Urban Forest Configuration on Urban Heat Islands in a Loess Hilly Region: Case Study Based on Yan’an City, China

PubMed Central

Zhang, Xinping; Hao, Hongke; Zhang, Fangfang; Hu, Youning

2017-01-01

In this study Yan’an City, a typical hilly valley city, was considered as the study area in order to explain the relationships between the surface urban heat island (SUHI) and land use/land cover (LULC) types, the landscape pattern metrics of LULC types and land surface temperature (LST) and remote sensing indexes were retrieved from Landsat data during 1990–2015, and to find factors contributed to the green space cool island intensity (GSCI) through field measurements of 34 green spaces. The results showed that during 1990–2015, because of local anthropogenic activities, SUHI was mainly located in lower vegetation cover areas. There was a significant suburban-urban gradient in the average LST, as well as its heterogeneity and fluctuations. Six landscape metrics comprising the fractal dimension index, percentage of landscape, aggregation index, division index, Shannon’s diversity index, and expansion intensity of the classified LST spatiotemporal changes were paralleled to LULC changes, especially for construction land, during the past 25 years. In the urban area, an index-based built-up index was the key positive factor for explaining LST increases, whereas the normalized difference vegetation index and modified normalized difference water index were crucial factors for explaining LST decreases during the study periods. In terms of the heat mitigation performance of green spaces, mixed forest was better than pure forest, and the urban forest configuration had positive effects on GSCI. The results of this study provide insights into the importance of species choice and the spatial design of green spaces for cooling the environment. PMID:28933770

a Free and Open Source Tool to Assess the Accuracy of Land Cover Maps: Implementation and Application to Lombardy Region (italy)

NASA Astrophysics Data System (ADS)

Bratic, G.; Brovelli, M. A.; Molinari, M. E.

2018-04-01

The availability of thematic maps has significantly increased over the last few years. Validation of these maps is a key factor in assessing their suitability for different applications. The evaluation of the accuracy of classified data is carried out through a comparison with a reference dataset and the generation of a confusion matrix from which many quality indexes can be derived. In this work, an ad hoc free and open source Python tool was implemented to automatically compute all the matrix confusion-derived accuracy indexes proposed by literature. The tool was integrated into GRASS GIS environment and successfully applied to evaluate the quality of three high-resolution global datasets (GlobeLand30, Global Urban Footprint, Global Human Settlement Layer Built-Up Grid) in the Lombardy Region area (Italy). In addition to the most commonly used accuracy measures, e.g. overall accuracy and Kappa, the tool allowed to compute and investigate less known indexes such as the Ground Truth and the Classification Success Index. The promising tool will be further extended with spatial autocorrelation analysis functions and made available to researcher and user community.

The Co-Influence of the Natural, Built, and Linguistic Landscape: Indexing Security

ERIC Educational Resources Information Center

Vickers, Caroline H.; Lindfelt, Christopher; Greer, Marsha

2015-01-01

This study examines physical aspects of place and how such visible aspects work to index a discourse of insecurity, including an insider-outsider binary, particularly through security signs in the linguistic landscape (LL). Our main focus is the relationship between policy and the uses of written language that appear in the LL in different census…

[Comparition of ecological security stress effects of artificial landscapes on natural landscapes in different rapid urban sprawl areas].

PubMed

Lin, Mei Xia; Lin, Tao; Qiu, Quan Yi; Sun, Cai Ge; Deng, Fu Liang; Zhang, Guo Qin

2017-04-18

The expansion of built-up area will cause stress effect on the regional natural ecological security pattern during urbanization process. Taking rapid expanding regions of four inland and coastal cities as study areas, including Tongzhou in Beijing, Zhengding in Hebei, Tanggu in Tianjin and Xiamen in Fujian, we constructed regional landscape stress indexes according to the principle of landscape ecology and comparatively analyzed the landscape pattern characteristics of rapid expanding regions and the differences of stress effect of artificial landscapes on four natural landscapes ecological security pattern in the process of rapid urbanization. Results showed that landscape erosion indexes of Tongzhou, Zhengding, Tanggu and Xiamen in 2015 were 1.039, 0.996, 1.239 and 0.945, respectively, which indicated that the natural landscapes were eroded significantly. Natural landscape types of those four regions presented different threatened levels. Among all natural landscape types, unused land and waters were worst threatened in Tongzhou, Zhengding and Tanggu, while in Xiamen cultivated land and waters showed the highest threat levels. The waters threat indexes of those four areas were all more than 0.743. Landscape isolation indexes of waters and unused land of the inland cities were greater than those of coastal cities, which meant water distribution of inland cities in the space was less gathered than that of coastal cities. Besides, compared with the other natural landscape, unused land and waters suffered the largest stress from artificial landscapes.

Understanding heterogeneity in metropolitan India: The added value of remote sensing data for analyzing sub-standard residential areas

NASA Astrophysics Data System (ADS)

Baud, Isa; Kuffer, Monika; Pfeffer, Karin; Sliuzas, Richard; Karuppannan, Sadasivam

2010-10-01

Analyzing the heterogeneity in metropolitan areas of India utilizing remote sensing data can help to identify more precise patterns of sub-standard residential areas. Earlier work analyzing inequalities in Indian cities employed a constructed index of multiple deprivations (IMDs) utilizing data from the Census of India 2001 ( http://censusindia.gov.in). While that index, described in an earlier paper, provided a first approach to identify heterogeneity at the citywide scale, it neither provided information on spatial variations within the geographical boundaries of the Census database, nor about physical characteristics, such as green spaces and the variation in housing density and quality. In this article, we analyze whether different types of sub-standard residential areas can be identified through remote sensing data, combined, where relevant, with ground-truthing and local knowledge. The specific questions address: (1) the extent to which types of residential sub-standard areas can be drawn from remote sensing data, based on patterns of green space, structure of layout, density of built-up areas, size of buildings and other site characteristics; (2) the spatial diversity of these residential types for selected electoral wards; and (3) the correlation between different types of sub-standard residential areas and the results of the index of multiple deprivations utilized at electoral ward level found previously. The results of a limited number of test wards in Delhi showed that it was possible to extract different residential types matching existing settlement categories using the physical indicators structure of layout, built-up density, building size and other site characteristics. However, the indicator 'amount of green spaces' was not useful to identify informal areas. The analysis of heterogeneity showed that wards with higher IMD scores displayed more or less the full range of residential types, implying that visual image interpretation is able to zoom in on clusters of deprivation of varying size. Finally, the visual interpretation of the diversity of residential types matched the results of the IMD analysis quite well, although the limited number of test wards would need to be expanded to strengthen this statement. Visual image analysis strengthens the robustness of the IMD, and in addition, gives a better idea of the degree of heterogeneity in deprivations within a ward.

Urban sprawl and body mass index among displaced Hurricane Katrina survivors.

PubMed

Arcaya, Mariana; James, Peter; Rhodes, Jean E; Waters, Mary C; Subramanian, S V

2014-08-01

Existing research suggests that walkable environments are protective against weight gain, while sprawling neighborhoods may pose health risks. Using prospective data on displaced Hurricane Katrina survivors, we provide the first natural experimental data on sprawl and body mass index (BMI). The analysis uses prospectively collected pre- (2003-2005) and post-hurricane (2006-2007) data from the Resilience in Survivors of Katrina (RISK) project on 280 displaced Hurricane Katrina survivors who had little control over their neighborhood placement immediately after the disaster. The county sprawl index, a standardized measure of built environment, was used to predict BMI at follow-up, adjusted for baseline BMI and sprawl; hurricane-related trauma; and demographic and economic characteristics. Respondents from 8 New Orleans-area counties were dispersed to 76 counties post-Katrina. Sprawl increased by an average of 1.5 standard deviations (30 points) on the county sprawl index. Each one point increase in sprawl was associated with approximately .05kg/m(2) higher BMI in unadjusted models (95%CI: .01-.08), and the relationship was not attenuated after covariate adjustment. We find a robust association between residence in a sprawling county and higher BMI unlikely to be caused by self-selection into neighborhoods, suggesting that the built environment may foster changes in weight. Copyright © 2014 Elsevier Inc. All rights reserved.

Urban Sprawl and Body Mass Index Among Displaced Hurricane Katrina Survivors

PubMed Central

Arcaya, Mariana; James, Peter; Rhodes, Jean; Waters, Mary C; Subramanian, S V

2014-01-01

Objective Existing research suggests that walkable environments are protective against weight gain, while sprawling neighborhoods may pose health risks. Using prospective data on displaced Hurricane Katrina survivors, we provide the first natural experimental data on sprawl and body mass index (BMI). Methods The analysis uses prospectively collected pre- (2003–2005) and post-hurricane (2006–2007) data from the Resilience in Survivors of Katrina (RISK) project on 280 displaced Hurricane Katrina survivors who had little control over their neighborhood placement immediately after the disaster. The county sprawl index, a standardized measure of built environment, was used to predict BMI at follow-up, adjusted for baseline BMI and sprawl; Hurricane-related trauma; and demographic and economic characteristics. Results Respondents from 8 New Orleans-area counties were dispersed to 76 counties post-Katrina. Sprawl increased by an average of 1.5 standard deviations (30 points) on the county sprawl index. Each one point increase in sprawl was associated with approximately .05 kg/m2 higher BMI in unadjusted models (95%CI: .01–.08), and the relationship was not attenuated after covariate adjustment. Conclusions We find a robust association between residence in a sprawling county and higher BMI unlikely to be caused by self-selection into neighborhoods, suggesting that the built environment may foster changes in weight. PMID:24732717

Urban-rural differences in environmental quality and associations with adverse birth outcomes

EPA Science Inventory

Exposures affecting human health differ across environmental media and level of urbanicity. To address this, we constructed an Environmental Quality Index (EQI) with data representing five domains (air, water, land, built, sociodemographic) for each United States (U.S.) county. F...

Effects of buffer size and shape on associations between the built environment and energy balance.

PubMed

James, Peter; Berrigan, David; Hart, Jaime E; Hipp, J Aaron; Hoehner, Christine M; Kerr, Jacqueline; Major, Jacqueline M; Oka, Masayoshi; Laden, Francine

2014-05-01

Uncertainty in the relevant spatial context may drive heterogeneity in findings on the built environment and energy balance. To estimate the effect of this uncertainty, we conducted a sensitivity analysis defining intersection and business densities and counts within different buffer sizes and shapes on associations with self-reported walking and body mass index. Linear regression results indicated that the scale and shape of buffers influenced study results and may partly explain the inconsistent findings in the built environment and energy balance literature. Copyright © 2014 Elsevier Ltd. All rights reserved.

HOTEX: An Approach for Global Mapping of Human Built-Up and Settlement Extent

NASA Technical Reports Server (NTRS)

Wang, Panshi; Huang, Chengquan; Tilton, James C.; Tan, Bin; Brown De Colstoun, Eric C.

2017-01-01

Understanding the impacts of urbanization requires accurate and updatable urban extent maps. Here we present an algorithm for mapping urban extent at global scale using Landsat data. An innovative hierarchical object-based texture (HOTex) classification approach was designed to overcome spectral confusion between urban and nonurban land cover types. VIIRS nightlights data and MODIS vegetation index datasets are integrated as high-level features under an object-based framework. We applied the HOTex method to the GLS-2010 Landsat images to produce a global map of human built-up and settlement extent. As shown by visual assessments, our method could effectively map urban extent and generate consistent results using images with inconsistent acquisition time and vegetation phenology. Using scene-level cross validation for results in Europe, we assessed the performance of HOTex and achieved a kappa coefficient of 0.91, compared to 0.74 from a baseline method using per-pixel classification using spectral information.

Quantifying landscape pattern and connectivity in a Mediterranean coastal settlement: the case of the Urla district, Turkey.

PubMed

Coskun Hepcan, Cigdem

2013-01-01

This study was aimed at analyzing and interpreting changes in landscape pattern and connectivity in the Urla district, Turkey using core landscape metrics based on a 42-year data derived from 1963 CORONA and 2005 ASTER satellite images and ten 1/25,000 topographical maps (1963-2005). The district represents a distinctive example of re-emerged suburbanization in the Izmir metropolitan area. In order to explore landscape characteristics of the study area, nine landscape composition and configuration metrics were chosen as follows: class area, percentage of landscape, number of patches, patch density, largest patch index, landscape shape index, mean patch size, perimeter area fractal dimension, and connectance index. The landscape configurations in the Urla district changed significantly by 2005 in that the process of (sub-)urbanization in the study area evolved from a rural, monocentric urban typology to a more suburban, polycentric morphology. Agricultural, maquis-phrygana, and forest areas decreased, while the built-up, olive plantation and phrygana areas increased. There was nearly a fivefold increase in the built-up areas during the study period, and the connectivity of the natural landscape declined. To prevent further fragmentation, it is important to keep the existing natural land cover types and agricultural areas intact. More importantly, a sustainable development scenario is required that contains a green infrastructure, or an ecological network planning for conservation and rehabilitation of the vital natural resources in the study area.

Built-up Land Expansion in Urban China

NASA Astrophysics Data System (ADS)

Chen, Yi; Chen, Zhigang; Huang, Xianjin

2017-04-01

Since the implementation of the reform and opening-up, rapid expansion of built-up land has caused a rapid reduction of arable land. The Ministry of Land and Resources of the People' s Republic of China has strengthened the management of built-up land through the basic arable land protection and the quota allocation of built-up land to control the urban sprawl. In addition, the general land use planning and the annual land use plan have been used to further ensure the effectiveness of land use management and control. However, the trend of built-up land expansion has not been effectively restrained. The built-up land expansion increased from 31.92 × 106 hm2 in 2005 to 38.89 × 106 hm2 in 2012. The rapid expansion of built-up land has been the major feature of land use changes in China and has led to built-up land vacancy and inefficient land use. This paper used a Data Envelopment Analysis (DEA) model to analyze the changes in built-up land efficiency in 336 cities in China from 2005 to 2012 during the implementation of National General Land Use Plan (2006-2020) (NGLUP). The results showed that the built-up land input-output efficiency of most cities declined, and more than half of the cities had excessive inputs of built-up land. Even in the most developed region of China, the built-up land efficiency was relatively low. The paper argues that the NGLUP failed to control the expansion of built-up land and to promote intensive land use. The allocation of built-up land designated by the Plan was not reasonable, and economic development has greatly relied on land inputs, which need to be improved. The paper finally suggests that the built-up land indices should be appropriately directed toward economically underdeveloped regions in central and western China, and the establishment of a withdrawal mechanism for inefficient land would better promote the efficient allocation of built-up land.

Analysis of vegetation recovery surrounding a restored wetland using the normalized difference infrared index (NDII) and normalized difference vegetation index (NDVI)

USGS Publications Warehouse

Wilson, Natalie R.; Norman, Laura

2018-01-01

Watershed restoration efforts seek to rejuvenate vegetation, biological diversity, and land productivity at Cienega San Bernardino, an important wetland in southeastern Arizona and northern Sonora, Mexico. Rock detention and earthen berm structures were built on the Cienega San Bernardino over the course of four decades, beginning in 1984 and continuing to the present. Previous research findings show that restoration supports and even increases vegetation health despite ongoing drought conditions in this arid watershed. However, the extent of restoration impacts is still unknown despite qualitative observations of improvement in surrounding vegetation amount and vigor. We analyzed spatial and temporal trends in vegetation greenness and soil moisture by applying the normalized difference vegetation index (NDVI) and normalized difference infrared index (NDII) to one dry summer season Landsat path/row from 1984 to 2016. The study area was divided into zones and spectral data for each zone was analyzed and compared with precipitation record using statistical measures including linear regression, Mann– Kendall test, and linear correlation. NDVI and NDII performed differently due to the presence of continued grazing and the effects of grazing on canopy cover; NDVI was better able to track changes in vegetation in areas without grazing while NDII was better at tracking changes in areas with continued grazing. Restoration impacts display higher greenness and vegetation water content levels, greater increases in greenness and water content through time, and a decoupling of vegetation greenness and water content from spring precipitation when compared to control sites in nearby tributary and upland areas. Our results confirm the potential of erosion control structures to affect areas up to 5 km downstream of restoration sites over time and to affect 1 km upstream of the sites.

Predicting fiber refractive index from a measured preform index profile

NASA Astrophysics Data System (ADS)

Kiiveri, P.; Koponen, J.; Harra, J.; Novotny, S.; Husu, H.; Ihalainen, H.; Kokki, T.; Aallos, V.; Kimmelma, O.; Paul, J.

2018-02-01

When producing fiber lasers and amplifiers, silica glass compositions consisting of three to six different materials are needed. Due to the varying needs of different applications, substantial number of different glass compositions are used in the active fiber structures. Often it is not possible to find material parameters for theoretical models to estimate thermal and mechanical properties of those glass compositions. This makes it challenging to predict accurately fiber core refractive index values, even if the preform index profile is measured. Usually the desired fiber refractive index value is achieved experimentally, which is expensive. To overcome this problem, we analyzed statistically the changes between the measured preform and fiber index values. We searched for correlations that would help to predict the Δn-value change from preform to fiber in a situation where we don't know the values of the glass material parameters that define the change. Our index change models were built using the data collected from preforms and fibers made by the Direct Nanoparticle Deposition (DND) technology.

Influences of different land use spatial control schemes on farmland conversion and urban development.

PubMed

Zhou, Min; Tan, Shukui; Zhang, Lu

2015-01-01

Land use planning is always officially implemented as an effective tool to control urban development and protect farmland. However, its impact on land use change remains untested in China. Using a case study of Hang-Jia-Hu region, the main objective of this paper was to investigate the influence of different land use spatial control schemes on farmland conversion and urban development. Comparisons of farmland conversion and urban development patterns between the urban planning area and the non-urban planning area were characterized by using remote sensing, geographical information systems, and landscape metrics. Results indicated that farmland conversion in the non-urban planning area was more intensive than that in the urban planning area, and that farmland patterns was more fragmented in the non-urban planning area. Built-up land patterns in the non-urban planning area showed a trend of aggregation, while those in the urban planning area had a dual trend of fragmentation and aggregation. Existing built-up areas had less influence on built-up land sprawl in the non-urban planning area than that in the urban planning area. Built-up land sprawl in the form of continuous development in the urban planning area led to farmland conversion; and in the non-urban planning area, built-up land sprawl in the form of leapfrogging development resulted in farmland areal declines and fragmentation. We argued that it is a basic requirement to integrate land use plans in urban and non-urban planning areas for land use planning and management.

Influences of Different Land Use Spatial Control Schemes on Farmland Conversion and Urban Development

PubMed Central

Zhou, Min; Tan, Shukui; Zhang, Lu

2015-01-01

Land use planning is always officially implemented as an effective tool to control urban development and protect farmland. However, its impact on land use change remains untested in China. Using a case study of Hang-Jia-Hu region, the main objective of this paper was to investigate the influence of different land use spatial control schemes on farmland conversion and urban development. Comparisons of farmland conversion and urban development patterns between the urban planning area and the non-urban planning area were characterized by using remote sensing, geographical information systems, and landscape metrics. Results indicated that farmland conversion in the non-urban planning area was more intensive than that in the urban planning area, and that farmland patterns was more fragmented in the non-urban planning area. Built-up land patterns in the non-urban planning area showed a trend of aggregation, while those in the urban planning area had a dual trend of fragmentation and aggregation. Existing built-up areas had less influence on built-up land sprawl in the non-urban planning area than that in the urban planning area. Built-up land sprawl in the form of continuous development in the urban planning area led to farmland conversion; and in the non-urban planning area, built-up land sprawl in the form of leapfrogging development resulted in farmland areal declines and fragmentation. We argued that it is a basic requirement to integrate land use plans in urban and non-urban planning areas for land use planning and management. PMID:25915897

Microclimate Evaluation of the Hradec Králové City using HUMIDEX

NASA Astrophysics Data System (ADS)

Rožnovský, Jaroslav; Litschmann, Tomáš; Středová, Hana; Středa, Tomáš; Salaš, Petr; Horká, Marie

2017-09-01

Urban environment differs from the surrounding landscape in terms of the values of meteorological parameters. This is often referred to as the urban heat island (UHI), which in simple terms means higher air temperatures in cities. The cause of these changes lies in the different active surfaces in cities, which subsequently results in a different radiation balance. The higher temperatures, however, also affect the living conditions in the city and during very high temperature periods can have negative effects on the health of the city inhabitants. The results presented in this paper are based on measurements taken over several years at locations near Hradec Králové, which is surrounded by different surface areas. Environment analysis was performed using the Humidex index. The obtained results show that replacing green areas with built-up areas affects temperatures in the city, when air temperatures are very high they significantly increase the discomfort of the inhabitants. Differences in the frequency of discomfort levels are observed especially during periods of high temperatures, at lower temperatures these differences are not significant. Higher frequencies of discomfort are observed at locations with artificial surfaces (asphalt, cobblestones, concrete) and in closed spaces. In contrast, locations with lots of green areas almost always have the value of this index lower or more balanced. The results should therefore be a valid argument for maintaining and extending green areas in cities.

Urbanization Process Monitoring in Northwest China based on DMSP/OLS Nighttime Light Data

NASA Astrophysics Data System (ADS)

Wang, K.; Bai, L. Y.; Feng, J. Z.

2017-02-01

In recent years, the DMSP/OLS nighttime light data have been widely applied to various fields such as monitoring and evaluation of urbanization, estimation of social economy, economical environment and health effects, hazards analysis, and fisheries research. The general urbanized level in China has rapidly developed since the 1990s, and the cities in northwest China, which were important population centres of the ancient silk road, have also been developed in a high speed thanks to China’s national strategy of Western Development. Given the Xinjiang autonomous region as a core area of One Belt and One Road, it is very necessary to study the urbanization processes and changes of its urban system and the whole northwest region of China. In this paper, we extracted built-up areas of the cities in northwest China in 1992, 1997, 2002, 2007, and 2012, evaluated urban expansion and spatial pattern through appropriate indexes, and also quantitatively analyzed the urbanized level of each city. The results showed that the cities in northwest China generally presented high strong and rapid expansion, but there were some large differences among cities. Urban expansion forms alternate with exterior expansion and interior filling, in general, the cities externally expandedafter 2002 and internally filledbefore 2002, meanwhile, there were a high positive correlation between urban built-up areas and population growth in Xinjiang autonomous.

Modelled spatiotemporal variability of outdoor thermal comfort in local climate zones of the city of Brno, Czech Republic.

PubMed

Geletič, Jan; Lehnert, Michal; Savić, Stevan; Milošević, Dragan

2018-05-15

This study uses the MUKLIMO_3 urban climate model (in German, Mikroskaliges Urbanes KLImaMOdell in 3-Dimensionen) and measurements from an urban climate network in order to simulate, validate and analyse the spatiotemporal pattern of human thermal comfort outdoors in the city of Brno (Czech Republic) during a heat-wave period. HUMIDEX, a heat index designed to quantify human heat exposure, was employed to assess thermal comfort, employing air temperature and relative humidity data. The city was divided into local climate zones (LCZs) in order to access differences in intra-urban thermal comfort. Validation of the model results, based on the measurement dates within the urban monitoring network, confirmed that the MUKLIMO_3 micro-scale model had the capacity to simulate the main spatiotemporal patterns of thermal comfort in an urban area and its vicinity. The results suggested that statistically significant differences in outdoor thermal comfort exist in the majority of cases between different LCZs. The most built-up LCZ types (LCZs 2, 3, 5, 8 and 10) were disclosed as the most uncomfortable areas of the city. Hence, conditions of great discomfort (HUMIDEX >40) were recorded in these areas, mainly in the afternoon hours (from 13.00 to 18.00 CEST), while some thermal discomfort continued overnight. In contrast, HUMIDEX values in sparsely built-up LCZ 9 and non-urban LCZs were substantially lower and indicated better thermal conditions for the urban population. Interestingly, the model captured a local increase of HUMIDEX values arising out of air humidity in LCZs with the presence of more vegetation (LCZs A and B) and in the vicinity of larger bodies of water (LCZ G). Copyright © 2017 Elsevier B.V. All rights reserved.

Research on safety evaluation model for in-vehicle secondary task driving.

PubMed

Jin, Lisheng; Xian, Huacai; Niu, Qingning; Bie, Jing

2015-08-01

This paper presents a new method for evaluating in-vehicle secondary task driving safety. There are five in-vehicle distracter tasks: tuning the radio to a local station, touching the touch-screen telephone menu to a certain song, talking with laboratory assistant, answering a telephone via Bluetooth headset, and finding the navigation system from Ipad4 computer. Forty young drivers completed the driving experiment on a driving simulator. Measures of fixations, saccades, and blinks are collected and analyzed. Based on the measures of driver eye movements which have significant difference between the baseline and secondary task driving conditions, the evaluation index system is built. The Analytic Network Process (ANP) theory is applied for determining the importance weight of the evaluation index in a fuzzy environment. On the basis of the importance weight of the evaluation index, Fuzzy Comprehensive Evaluation (FCE) method is utilized to evaluate the secondary task driving safety. Results show that driving with secondary tasks greatly distracts the driver's attention from road and the evaluation model built in this study could estimate driving safety effectively under different driving conditions. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

Monitoring the transformation of Yogyakarta’s urban form using remote sensing and Geographic Information System

NASA Astrophysics Data System (ADS)

Rozano, B.; Yan, W.

2018-04-01

Urban form transformation can be seen as the results of urbanization spatially, where the land changed into an urbanized one. Monitoring its changes, however, require many human and financial resources. Accordingly, this research aims to identify urban form transformation using GIS/remote sensing and its spatial implications to the peri-urban area. In order to analyze the land cover changes, this research uses multispectral images from 1990-2016 for built-up extraction using New Built Up Index (NBUI) analysis and population data 1996-2015 combined with primary data from the respondents and key informants. Based on the analysis, it is seen that the compacted Yogyakarta Urban Area scattered predominantly to the Northern part of its periphery with the increase of urban area from 21.19% in 1990 to 50.91% in 2017. While this urbanization is an on-going process, the population of urban core showed a de-concentration phenomenon in 2015, spreading to its periphery causing some negative implications to the peri-urban area.

Automated Text Markup for Information Retrieval from an Electronic Textbook of Infectious Disease

PubMed Central

Berrios, Daniel C.; Kehler, Andrew; Kim, David K.; Yu, Victor L.; Fagan, Lawrence M.

1998-01-01

The information needs of practicing clinicians frequently require textbook or journal searches. Making these sources available in electronic form improves the speed of these searches, but precision (i.e., the fraction of relevant to total documents retrieved) remains low. Improving the traditional keyword search by transforming search terms into canonical concepts does not improve search precision greatly. Kim et al. have designed and built a prototype system (MYCIN II) for computer-based information retrieval from a forthcoming electronic textbook of infectious disease. The system requires manual indexing by experts in the form of complex text markup. However, this mark-up process is time consuming (about 3 person-hours to generate, review, and transcribe the index for each of 218 chapters). We have designed and implemented a system to semiautomate the markup process. The system, information extraction for semiautomated indexing of documents (ISAID), uses query models and existing information-extraction tools to provide support for any user, including the author of the source material, to mark up tertiary information sources quickly and accurately.

[Ecological risk assessment of human activity of rapid economic development regions in southern Jiangsu, China: a case study of Dantu District of Zhenjiang City].

PubMed

Fang, Guang-Ling; Xiang, Bao; Wang, Bao-Liang; Jin, Xia; Hu, Yu; Zhang, Li-Kun

2014-04-01

This article investigated the spatiotemporal variation of landscape ecological risk in Dantu District of Zhenjiang City with statistical method based on the ETM remote sensing data in 2000 and 2005, and the TM remote sensing data in 2010, and quantitative index of regional ecological risk assessment was established with the employment of landscape index, so as to enhance the ecosystem management, prevent and reduce the regional ecological risk in southern Jiangsu with rapid economic development. The results showed that the fragmentations, divergence, and ecological losses of natural landscape types, such as forestland, wetland, waters, etc., were deteriorated with the expansion of built-up lands from 2000 to 2010. The higher ecological risk zone took up 5.7%, 9.0%, and 10.2% of the whole region in 2000, 2005, and 2010, respectively, which mainly distributed in the plain hilly region. During the study period, the area aggravating to the higher ecological risk zone was approximately 296.2 km2, 48% of the whole region. The ecological risk rose up in most of the region. The interference of rapid economic development to landscape patterns was even more intensive, with obvious spatial differences in ecological risk distribution. The measures of exploiting resources near the port, utilizing natural wetlands, constructing industrial parks, and rapid urbanization, etc., intensified the ecological risk and accelerated the conversion rate. Prompt strategies should be established to manage the ecological risk of this region.

The impact of urban planning on land use and land cover in Pudong of Shanghai, China.

PubMed

Zhao, Bin; Nakagoshi, Nobukazu; Chen, Jia-kuan; Kong, Ling-yi

2003-03-01

Functional zones in cities constitute the most conspicuous components of newly developed urban area, and have been a hot spot for domestic and foreign investors in China, which not only show the expanse of urban space accompanied by the shifts both in landscape (from rural to urban) and land use (from less extensive to extensive), but also display the transformation of regional ecological functions. By using the theories and methods of landscape ecology, the structure of landscape and landscape ecological planning can be analyzed and evaluated for studying the urban functional zones' layout. In 1990, the Central Government of China declared to develop and open up Pudong New Area so as to promote economic development in Shanghai. Benefited from the advantages of Shanghai's location and economy, the government of Pudong New Area has successively built up 7 different functional zones over the past decade according to their functions and strategic goals. Based on the multi-spectral satellite imageries taken in 1990, 1997 and 2000, a landscape ecology analysis was carried out for Pudong New Area of Shanghai, supported by GIS technology. Green space (including croplands) and built-up area are the major factors considered in developing urban landscape. This paper was mainly concerned with the different spatial patterns and dynamic of green space, built-up areas and new buildings in different functional zones, influenced by different functional layouts and development strategies. The rapid urbanization in Pudong New Area resulted in a more homogeneous landscape. Agricultural landscape and suburban landscape were gradually replaced by urban landscape as the degree of urbanization increased. As consequence of urbanization in Pudong, not only built-up patches, but also newly-built patches and green patches merged into one large patch, which should be attributed to the construction policy of extensive green space as the urban development process in Pudong New Area. The shape of green area of 7 functional zones became more and more regular because of the horticultural needs in Shanghai urban planning. Some suggestions were finally made for the study of future urban planning and layout.

Influence of core design, production technique, and material selection on fracture behavior of yttria-stabilized tetragonal zirconia polycrystal fixed dental prostheses produced using different multilayer techniques: split-file, over-pressing, and manually built-up veneers.

PubMed

Mahmood, Deyar Jallal Hadi; Linderoth, Ewa H; Wennerberg, Ann; Vult Von Steyern, Per

2016-01-01

To investigate and compare the fracture strength and fracture mode in eleven groups of currently, the most commonly used multilayer three-unit all-ceramic yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) fixed dental prostheses (FDPs) with respect to the choice of core material, veneering material area, manufacturing technique, design of connectors, and radii of curvature of FDP cores. A total of 110 three-unit Y-TZP FDP cores with one intermediate pontic were made. The FDP cores in groups 1-7 were made with a split-file design, veneered with manually built-up porcelain, computer-aided design-on veneers, and over-pressed veneers. Groups 8-11 consisted of FDPs with a state-of-the-art design, veneered with manually built-up porcelain. All the FDP cores were subjected to simulated aging and finally loaded to fracture. There was a significant difference (P<0.05) between the core designs, but not between the different types of Y-TZP materials. The split-file designs with VITABLOCS(®) (1,806±165 N) and e.max(®) ZirPress (1,854±115 N) and the state-of-the-art design with VITA VM(®) 9 (1,849±150 N) demonstrated the highest mean fracture values. The shape of a split-file designed all-ceramic reconstruction calls for a different dimension protocol, compared to traditionally shaped ones, as the split-file design leads to sharp approximal indentations acting as fractural impressions, thus decreasing the overall strength. The design of a framework is a crucial factor for the load bearing capacity of an all-ceramic FDP. The state-of-the-art design is preferable since the split-file designed cores call for a cross-sectional connector area at least 42% larger, to have the same load bearing capacity as the state-of-the-art designed cores. All veneering materials and techniques tested in the study, split-file, over-press, built-up porcelains, and glass-ceramics are, with a great safety margin, sufficient for clinical use both anteriorly and posteriorly. Analysis of the fracture pattern shows differences between the milled veneers and over-pressed or built-up veneers, where the milled ones show numerically more veneer cracks and the other groups only show complete connector fractures.

Air Pollution Abatement Performances of Green Infrastructure in Open Road and Built-up Street Canyon Environments – A Review

EPA Science Inventory

Intensifying the proportion of urban green infrastructure has been considered as one of the remedies for air pollution levels in cities, yet the impact of numerous vegetation types deployed in different built environments has to be fully synthesised and quantified. This review ex...

The Bionic Clicker Mark I & II

PubMed Central

Magee, Elliott G.; Ourselin, S.; Nikitichev, Daniil; Vercauteren, T.; Vanhoestenberghe, Anne

2017-01-01

In this manuscript, we present two 'Bionic Clicker' systems, the first designed to demonstrate electromyography (EMG) based control systems for educational purposes and the second for research purposes. EMG based control systems pick up electrical signals generated by muscle activation and use these as inputs for controllers. EMG controllers are widely used in prosthetics to control limbs. The Mark I (MK I) clicker allows the wearer to change the slide of a presentation by raising their index finger. It is built around a microcontroller and a bio-signals shield. It generated a lot of interest from both the public and research community. The Mark II (MK II) device presented here was designed to be a cheaper, sleeker, and more customizable system that can be easily modified and directly transmit EMG data. It is built using a wireless capable microcontroller and a muscle sensor. PMID:28829413

The Bionic Clicker Mark I & II.

PubMed

Magee, Elliott G; Ourselin, S; Nikitichev, Daniil; Vercauteren, T; Vanhoestenberghe, Anne

2017-08-14

In this manuscript, we present two 'Bionic Clicker' systems, the first designed to demonstrate electromyography (EMG) based control systems for educational purposes and the second for research purposes. EMG based control systems pick up electrical signals generated by muscle activation and use these as inputs for controllers. EMG controllers are widely used in prosthetics to control limbs. The Mark I (MK I) clicker allows the wearer to change the slide of a presentation by raising their index finger. It is built around a microcontroller and a bio-signals shield. It generated a lot of interest from both the public and research community. The Mark II (MK II) device presented here was designed to be a cheaper, sleeker, and more customizable system that can be easily modified and directly transmit EMG data. It is built using a wireless capable microcontroller and a muscle sensor.

Using linear algebra for protein structural comparison and classification

PubMed Central

2009-01-01

In this article, we describe a novel methodology to extract semantic characteristics from protein structures using linear algebra in order to compose structural signature vectors which may be used efficiently to compare and classify protein structures into fold families. These signatures are built from the pattern of hydrophobic intrachain interactions using Singular Value Decomposition (SVD) and Latent Semantic Indexing (LSI) techniques. Considering proteins as documents and contacts as terms, we have built a retrieval system which is able to find conserved contacts in samples of myoglobin fold family and to retrieve these proteins among proteins of varied folds with precision of up to 80%. The classifier is a web tool available at our laboratory website. Users can search for similar chains from a specific PDB, view and compare their contact maps and browse their structures using a JMol plug-in. PMID:21637532

Using linear algebra for protein structural comparison and classification.

PubMed

Gomide, Janaína; Melo-Minardi, Raquel; Dos Santos, Marcos Augusto; Neshich, Goran; Meira, Wagner; Lopes, Júlio César; Santoro, Marcelo

2009-07-01

In this article, we describe a novel methodology to extract semantic characteristics from protein structures using linear algebra in order to compose structural signature vectors which may be used efficiently to compare and classify protein structures into fold families. These signatures are built from the pattern of hydrophobic intrachain interactions using Singular Value Decomposition (SVD) and Latent Semantic Indexing (LSI) techniques. Considering proteins as documents and contacts as terms, we have built a retrieval system which is able to find conserved contacts in samples of myoglobin fold family and to retrieve these proteins among proteins of varied folds with precision of up to 80%. The classifier is a web tool available at our laboratory website. Users can search for similar chains from a specific PDB, view and compare their contact maps and browse their structures using a JMol plug-in.

Impact factors on expansion of built-up areas in Zhejiang Province, China

NASA Astrophysics Data System (ADS)

Liu, Dong; Zhu, Qiankun; Li, Yan; Gong, Fang

2017-10-01

Built-up areas are the results of human activities. Not only are they the real reflection of human and society activities, but also one of the most important input parameters for the simulation of biogeochemical cycle. Therefore, it is very necessary to map the distribution of built-up areas and monitor their changes by using new technologies and methods at high spatiotemporal resolution. By combining technologies of GIS (Geographic Information System) and RS (Remote Sensing), this study mainly explored the expansion and driving factors of built-up areas at the beginning of the 21st century in Zhejiang Province, China. Firstly, it introduced the mapping processes of LULC (Land Use and Land Cover) based on the method which combined object-oriented method and binary decision tree. Then, it analyzed the expansion features of built-up areas in Zhejiang from 2000 to 2005 and 2005 to 2010. In addition to these, potential driving factors on the expansion of built-up areas were also explored, which contained physical geographical factors, railways, highways, rivers, urban centers, elevation, and slop. Results revealed that the expansions of built-up areas in Zhejiang from 2000 to 2005 and from 2005 to 2010 were very obvious and they showed high levels of variation in spatial heterogeneity. Except those, increased built-up areas with distance to railways, highways, rivers, and urban centers could be fitted with power function (y = a*xb ), with minimum R2 of 0.9507 for urban centers from 2000 to 2005; the increased permillages of built-up areas to mean elevation and mean slop could be fitted with exponential functions (y = a*ebx), with minimum R2 of 0.6657 for mean slop from 2005 to 2010. Besides, government policy could also impact expansion of built-up areas. In a nutshell, a series of conclusions were obtained through this study about the spatial features and driving factors of evolution of built-up areas in Zhejiang from 2000 to 2010.

Using Combination of Planar and Height Features for Detecting Built-Up Areas from High-Resolution Stereo Imagery

NASA Astrophysics Data System (ADS)

Peng, F.; Cai, X.; Tan, W.

2017-09-01

Within-class spectral variation and between-class spectral confusion in remotely sensed imagery degrades the performance of built-up area detection when using planar texture, shape, and spectral features. Terrain slope and building height are often used to optimize the results, but extracted from auxiliary data (e.g. LIDAR data, DSM). Moreover, the auxiliary data must be acquired around the same time as image acquisition. Otherwise, built-up area detection accuracy is affected. Stereo imagery incorporates both planar and height information unlike single remotely sensed images. Stereo imagery acquired by many satellites (e.g. Worldview-4, Pleiades-HR, ALOS-PRISM, and ZY-3) can be used as data source of identifying built-up areas. A new method of identifying high-accuracy built-up areas from stereo imagery is achieved by using a combination of planar and height features. The digital surface model (DSM) and digital orthophoto map (DOM) are first generated from stereo images. Then, height values of above-ground objects (e.g. buildings) are calculated from the DSM, and used to obtain raw built-up areas. Other raw built-up areas are obtained from the DOM using Pantex and Gabor, respectively. Final high-accuracy built-up area results are achieved from these raw built-up areas using the decision level fusion. Experimental results show that accurate built-up areas can be achieved from stereo imagery. The height information used in the proposed method is derived from stereo imagery itself, with no need to require auxiliary height data (e.g. LIDAR data). The proposed method is suitable for spaceborne and airborne stereo pairs and triplets.

The relationship between built-up areas and the spatial development of the mean maximum urban heat island in Debrecen, Hungary

NASA Astrophysics Data System (ADS)

Bottyán, Zsolt; Kircsi, Andrea; Szegedi, Sándor; Unger, János

2005-03-01

The climate of built-up regions differs significantly from rural regions and the most important modifying effect of urbanization on local climate is the urban temperature excess, otherwise called the urban heat island (UHI).This study examines the influence of built-up areas on the near-surface air temperature field in the case of the medium-sized city of Debrecen, Hungary. Mobile measurements were used under different weather conditions between March 2002 and March 2003. Efforts concentrated on the determination of the spatial distribution of mean maximum UHI intensity with special regard to land-use features such as built-up ratio and its areal extensions.In both (heating and non-heating) seasons the spatial distribution of the UHI intensity field showed a basically concentric shape with local anomalies. The mean maximum UHI intensity reaches more than 2.0 °C (heating season) and 2.5 °C (non-heating season) in the centre of the city. We established the relationship between the above-mentioned land-use parameters and mean maximum UHI intensity by means of multiple linear regression analysis. As the measured and predicted mean maximum UHI intensity patterns show, there is an obvious connection between the spatial distribution of urban thermal excess and the land-use parameters examined, so these parameters play a significant role in the development of the strong UHI intensity field over the city.

Establishment of a Quantitative Medical Technology Evaluation System and Indicators within Medical Institutions.

PubMed

Wu, Suo-Wei; Chen, Tong; Pan, Qi; Wei, Liang-Yu; Wang, Qin; Li, Chao; Song, Jing-Chen; Luo, Ji

2018-06-05

The development and application of medical technologies reflect the medical quality and clinical capacity of a hospital. It is also an effective approach in upgrading medical service and core competitiveness among medical institutions. This study aimed to build a quantitative medical technology evaluation system through questionnaire survey within medical institutions to perform an assessment to medical technologies more objectively and accurately, and promote the management of medical quality technologies and ensure the medical safety of various operations among the hospitals. A two-leveled quantitative medical technology evaluation system was built through a two-round questionnaire survey of chosen experts. The Delphi method was applied in identifying the structure of evaluation system and indicators. The judgment of the experts on the indicators was adopted in building the matrix so that the weight coefficient and maximum eigenvalue (λ max), consistency index (CI), and random consistency ratio (CR) could be obtained and collected. The results were verified through consistency tests, and the index weight coefficient of each indicator was conducted and calculated through analytical hierarchy process. Twenty-six experts of different medical fields were involved in the questionnaire survey, 25 of whom successfully responded to the two-round research. Altogether, 4 primary indicators (safety, effectiveness, innovativeness, and benefits), as well as 13 secondary indicators, were included in the evaluation system. The matrix is built to conduct the λ max, CI, and CR of each expert in the survey, and the index weight coefficients of primary indicators were 0.33, 0.28, 0.27, and 0.12, respectively, and the index weight coefficients of secondary indicators were conducted and calculated accordingly. As the two-round questionnaire survey of experts and statistical analysis were performed and credibility of the results was verified through consistency evaluation test, the study established a quantitative medical technology evaluation system model and assessment indicators within medical institutions based on the Delphi method and analytical hierarchy process. Moreover, further verifications, adjustments, and optimizations of the system and indicators will be performed in follow-up studies.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stanislavskii, L.Ya.

Large turbogenerators with built-up rotor designs operating in U.S.S.R. power plants were studied to obtain data on reliability, failures, and performance characteristics for normal and abnormal operating conditions. Data for 23 turbogenerators manufactured by domestic and foreign firms were analyzed. The studies showed that the reliability factor of the joints of built-up rotors should be equal to approximately 6 to provide a monolithic built-up rotor. At lower built-up rotor joint reliability factors, weakening of the joints occurred during their operation, leading to extreme generator vibration, damage to the insulating sockets at the joint, burning of the joints and sometimes breakagemore » of the screws holding the joints. When it is necessary to restore the monolithic nature of the joints of a rotor its design should permit replacement of the tightening devices (tie rods, screws). If this is not possible the built-up rotor becomes unsuitable for operation. During abnormal conditions there are maximum temperatures in the joint of a built-up rotor about 50 percent greater than in the end part of the rotor. Thus special structural measures are necessary to improve the electrical contact in the joints of the built-up parts of the rotors of large turbogenerators. In all cases where they are not dictated by construction requirements (supercooled turbogenerators), the use of built-up rotors is unfavorable. (LCL)« less

The skin aging index: a new approach for documenting anti-aging products or procedures.

PubMed

Nkengne, Alex; Roure, Romain; Rossi, Ana Beatriz; Bertin, Christiane

2013-08-01

The overall appearance of an aged skin is characterized by a combination of several attributes such as wrinkles, brown spots and sagging. Our objective was to develop and validate a statistical framework to assess the overall anti-ageing benefits of products/procedures. Different skin attributes were evaluated by a clinical grader and combined using a Principal Component Analysis (PCA). The Skin Ageing Index was defined as the normalized projection of the clinical grading values on the first PCA axis. Several Skin Indexes were built by grouping specific parameters related to a skin condition such as overall ageing, wrinkles and sagging. The method was validated following two steps. Firstly, a clinical study was performed on 173 Caucasian women and the correlation between the Skin Indexes and the volunteers' real and perceived age was estimated. Secondly, a double-blinded placebo-controlled randomized study was performed on 87 Caucasian women to assess the efficacy of an anti-wrinkle cream containing retinol, hyaluronic acid and dihydroxymethylchromone. Facial wrinkles were clinically evaluated and a Wrinkle Index was built. All indexes were highly correlated with the real and the perceived age (0.57 ≤ Pearson R ≤ 0.92, P-value ≤ 0.05). Finally, the Wrinkle Index provides documented evidence that the tested product significantly reduced the appearance of wrinkles versus the placebo and the baseline assessment (-23.53% after 4 weeks, -27.83% after 8 weeks). Skin ageing Indexes capture information relevant to the visual transformation of facial skin with age, while providing documented product benefits. These tools may enable a simpler and more consistent comparison of anti-ageing products/procedures. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Impact of aerial infrared roof moisture scans on the U.S. Army's ROOFER program

NASA Astrophysics Data System (ADS)

Knehans, Al; Ledford, Jim

1993-04-01

The ROOFER program is being used by the U.S. Army to inspect and evaluate its built-up and single-ply membrane roofs. The results of the inspection effort are used to develop an overall roof condition index. The condition of the roof insulation can greatly alter the final condition index. By using an aerial infrared (IR) roof moisture scan, all the insulated roofs at most Army installations can be effectively surveyed in a very short time. The aerial scans have detected numerous areas of wet roof insulation, which has had a profound impact on the results of the ROOFER program. The scans have also provided management personnel with more accurate analysis as to the actual condition of the installation's insulated roofs.

Modeling and Experimental Study of Fracture-Based Wellbore Strengthening

NASA Astrophysics Data System (ADS)

Zhong, Ruizhi

Measuring physical dimensions has always been one of the challenges for optical metrology. Specifically, the thickness is often a prerequisite piece of information for other optical properties when characterizing components and materials. For example, when measuring the index of refraction of materials using interferometric methods, the direct measurement is optical path length difference. To acquire index of refraction with high accuracy, the thickness must be predetermined with correspondingly high accuracy as well. In this dissertation, a prototype low-coherence interferometer system is developed through several design iterations to measure the absolute thickness map of a plane-parallel samples in a nondestructive manner. The prototype system is built with all off-the-shelf components in a configuration that combines a Twyman-Green interferometer and a Sagnac interferometer. The repeatability and accuracy of the measured thickness are characterized to be less than one micrometer. Based on the information acquired from the development of the prototype system, a permanent low-coherence interferometer system is designed and built to achieve a higher accuracy in thickness measurements, on the level of a hundred nanometers. A comprehensive uncertainty model is established for the thickness measurement using the low-coherence interferometer system. Additionally, this system is also capable of measuring the topography of both surfaces of the sample, as well as the wedge of the sample. This low-coherence dimensional metrology uses only the reflection signals from the sample surfaces. Thus, the measured physical dimensions are independent of the index of refraction, transparency, transmission, or homogeneity of the sample. In addition, a laser Sagnac interferometer is designed and built by repurposing the test arm of the low-coherence interferometer. The laser Sagnac interferometer provides a non-contact bulk index of refraction metrology for solid materials. The uncertainty model for the index of refraction measurement is detailed with analytical solutions. The laser Sagnac interferometer requires relatively simple sample preparation and fast turn-around time, which is suitable for applications in optical material research.

Structural, Culinary, Nutritional and Anti-Nutritional Properties of High Protein, Gluten Free, 100% Legume Pasta.

PubMed

Laleg, Karima; Cassan, Denis; Barron, Cécile; Prabhasankar, Pichan; Micard, Valérie

2016-01-01

Wheat pasta has a compact structure built by a gluten network entrapping starch granules resulting in a low glycemic index, but is nevertheless unsuitable for gluten-intolerant people. High protein gluten-free legume flours, rich in fibers, resistant starch and minerals are thus a good alternative for gluten-free pasta production. In this study, gluten-free pasta was produced exclusively from faba, lentil or black-gram flours. The relationship between their structure, their cooking and Rheological properties and their in-vitro starch digestion was analyzed and compared to cereal gluten-free commercial pasta. Trypsin inhibitory activity, phytic acid and α-galactosides were determined in flours and in cooked pasta. All legume pasta were rich in protein, resistant starch and fibers. They had a thick but weak protein network, which is built during the pasta cooking step. This particular structure altered pasta springiness and increased cooking losses. Black-gram pasta, which is especially rich in soluble fibers, differed from faba and lentil pasta, with high springiness (0.85 vs. 0.75) and less loss during cooking. In comparison to a commercial cereal gluten-free pasta, all the legume pasta lost less material during cooking but was less cohesive and springy. Interestingly, due to their particular composition and structure, lentil and faba pasta released their starch more slowly than the commercial gluten-free pasta during the in-vitro digestion process. Anti-nutritional factors in legumes, such as trypsin inhibitory activity and α-galactosides were reduced by up to 82% and 73%, respectively, by pasta processing and cooking. However, these processing steps had a minor effect on phytic acid. This study demonstrates the advantages of using legumes for the production of gluten-free pasta with a low glycemic index and high nutritional quality.

Structural, Culinary, Nutritional and Anti-Nutritional Properties of High Protein, Gluten Free, 100% Legume Pasta

PubMed Central

Laleg, Karima; Cassan, Denis; Barron, Cécile; Prabhasankar, Pichan

2016-01-01

Wheat pasta has a compact structure built by a gluten network entrapping starch granules resulting in a low glycemic index, but is nevertheless unsuitable for gluten-intolerant people. High protein gluten-free legume flours, rich in fibers, resistant starch and minerals are thus a good alternative for gluten-free pasta production. In this study, gluten-free pasta was produced exclusively from faba, lentil or black-gram flours. The relationship between their structure, their cooking and Rheological properties and their in-vitro starch digestion was analyzed and compared to cereal gluten-free commercial pasta. Trypsin inhibitory activity, phytic acid and α-galactosides were determined in flours and in cooked pasta. All legume pasta were rich in protein, resistant starch and fibers. They had a thick but weak protein network, which is built during the pasta cooking step. This particular structure altered pasta springiness and increased cooking losses. Black-gram pasta, which is especially rich in soluble fibers, differed from faba and lentil pasta, with high springiness (0.85 vs. 0.75) and less loss during cooking. In comparison to a commercial cereal gluten-free pasta, all the legume pasta lost less material during cooking but was less cohesive and springy. Interestingly, due to their particular composition and structure, lentil and faba pasta released their starch more slowly than the commercial gluten-free pasta during the in-vitro digestion process. Anti-nutritional factors in legumes, such as trypsin inhibitory activity and α-galactosides were reduced by up to 82% and 73%, respectively, by pasta processing and cooking. However, these processing steps had a minor effect on phytic acid. This study demonstrates the advantages of using legumes for the production of gluten-free pasta with a low glycemic index and high nutritional quality. PMID:27603917

Measuring Teachers and Learners' Perceptions of the Quality of Their Online Learning Experience

ERIC Educational Resources Information Center

Gómez-Rey, Pilar; Barbera, Elena; Fernández-Navarro, Francisco

2016-01-01

This article explores the quality of the online learning experience based on the Sloan-C framework and the Online Learning Consortium's (OLC) quality scorecard. The OLC index has been implemented to evaluate quality in online programs from different perspectives. Despite this, the opinions of learners are ignored, and it is built using feedback…

SU-F-R-18: Updates to the Computational Environment for Radiological Research for Image Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Apte, Aditya P.; Deasy, Joseph O.

2016-06-15

Purpose: To present new tools in CERR for Texture Analysis and Visualization. Method: (1) Quantitative Image Analysis: We added the ability to compute Haralick texture features based on local neighbourhood. The Texture features depend on many parameters used in their derivation. For example: (a) directionality, (b) quantization of image, (c) patch-size for the neighborhood, (d) handling of the edge voxels within the region of interest, (e) Averaging co-occurance matrix vs texture features for different directions etc. A graphical user interface was built to set these parameters and then visualize their impact on the resulting texture maps. The entire functionality wasmore » written in Matlab. Array indexing was used to speed up the texture calculation. The computation speed is very competitive with the ITK library. Moreover, our implementation works with multiple CPUs and the computation time can be further reduced by using multiple processor threads. In order to reduce the Haralick texture maps into scalar features, we propose the use of Texture Volume Histograms. This lets users make use of the entire distribution of texture values within the region of interest rather than using just the mean and the standard deviations. (2) Qualitative/Visualization tools: The derived texture maps are stored as a new scan (derived) within CERR’s planC data structure. A display that compares various scans was built to show the raw image and the derived texture maps side-by-side. These images are positionally linked and can be navigated together. CERR’s graphics handling was updated and sped-up to be compatible with the newer Matlab versions. As a result, the users can use (a) different window levels and colormaps for different viewports, (b) click-and-drag or use mouse scroll-wheel to navigate slices. Results: The new features and updates are available via https://www.github.com/adityaapte/cerr . Conclusion: Features added to CERR increase its utility in Radiomics and Outcomes modeling.« less

International variation in neighborhood walkability, transit, and recreation environments using geographic information systems: the IPEN adult study.

PubMed

Adams, Marc A; Frank, Lawrence D; Schipperijn, Jasper; Smith, Graham; Chapman, James; Christiansen, Lars B; Coffee, Neil; Salvo, Deborah; du Toit, Lorinne; Dygrýn, Jan; Hino, Adriano Akira Ferreira; Lai, Poh-chin; Mavoa, Suzanne; Pinzón, José David; Van de Weghe, Nico; Cerin, Ester; Davey, Rachel; Macfarlane, Duncan; Owen, Neville; Sallis, James F

2014-10-25

The World Health Organization recommends strategies to improve urban design, public transportation, and recreation facilities to facilitate physical activity for non-communicable disease prevention for an increasingly urbanized global population. Most evidence supporting environmental associations with physical activity comes from single countries or regions with limited variation in urban form. This paper documents variation in comparable built environment features across countries from diverse regions. The International Physical Activity and the Environment Network (IPEN) study of adults aimed to measure the full range of variation in the built environment using geographic information systems (GIS) across 12 countries on 5 continents. Investigators in Australia, Belgium, Brazil, Colombia, the Czech Republic, Denmark, China, Mexico, New Zealand, Spain, the United Kingdom, and the United States followed a common research protocol to develop internationally comparable measures. Using detailed instructions, GIS-based measures included features such as walkability (i.e., residential density, street connectivity, mix of land uses), and access to public transit, parks, and private recreation facilities around each participant's residential address using 1-km and 500-m street network buffers. Eleven of 12 countries and 15 cities had objective GIS data on built environment features. We observed a 38-fold difference in median residential densities, a 5-fold difference in median intersection densities and an 18-fold difference in median park densities. Hong Kong had the highest and North Shore, New Zealand had the lowest median walkability index values, representing a difference of 9 standard deviations in GIS-measured walkability. Results show that comparable measures can be created across a range of cultural settings revealing profound global differences in urban form relevant to physical activity. These measures allow cities to be ranked more precisely than previously possible. The highly variable measures of urban form will be used to explain individuals' physical activity, sedentary behaviors, body mass index, and other health outcomes on an international basis. Present measures provide the ability to estimate dose-response relationships from projected changes to the built environment that would otherwise be impossible.

Assessing climate change and health vulnerability at the local level: Travis County, Texas.

PubMed

Prudent, Natasha; Houghton, Adele; Luber, George

2016-10-01

We created a measure to help comprehend population vulnerability to potential flooding and excessive heat events using health, built environment and social factors. Through principal component analysis (PCA), we created non-weighted sum index scores of literature-reviewed social and built environment characteristics. We created baseline poor health measures using 1999-2005 age-adjusted cardiovascular and combined diabetes and hypertension mortality rates to correspond with social-built environment indices. We mapped US Census block groups by linked age-adjusted mortality and a PCA-created social-built environment index. The goal was to measure flooding and excessive heat event vulnerability as proxies for population vulnerability to climate change for Travis County, Texas. This assessment identified communities where baseline poor health, social marginalisation and built environmental impediments intersected. Such assessments may assist targeted interventions and improve emergency preparedness in identified vulnerable communities, while fostering resilience through the focus of climate change adaptation policies at the local level. No claim to original US government works. Journal compilation © 2016 Overseas Development Institute.

Identifying built environmental patterns using cluster analysis and GIS: relationships with walking, cycling and body mass index in French adults.

PubMed

Charreire, Hélène; Weber, Christiane; Chaix, Basile; Salze, Paul; Casey, Romain; Banos, Arnaud; Badariotti, Dominique; Kesse-Guyot, Emmanuelle; Hercberg, Serge; Simon, Chantal; Oppert, Jean-Michel

2012-05-23

Socio-ecological models suggest that both individual and neighborhood characteristics contribute to facilitating health-enhancing behaviors such as physical activity. Few European studies have explored relationships between local built environmental characteristics, recreational walking and cycling and weight status in adults. The aim of this study was to identify built environmental patterns in a French urban context and to assess associations with recreational walking and cycling behaviors as performed by middle-aged adult residents. We used a two-step procedure based on cluster analysis to identify built environmental patterns in the region surrounding Paris, France, using measures derived from Geographic Information Systems databases on green spaces, proximity facilities (destinations) and cycle paths. Individual data were obtained from participants in the SU.VI.MAX cohort; 1,309 participants residing in the Ile-de-France in 2007 were included in this analysis. Associations between built environment patterns, leisure walking/cycling data (h/week) and measured weight status were assessed using multinomial logistic regression with adjustment for individual and neighborhood characteristics. Based on accessibility to green spaces, proximity facilities and availability of cycle paths, seven built environmental patterns were identified. The geographic distribution of built environmental patterns in the Ile-de-France showed that a pattern characterized by poor spatial accessibility to green spaces and proximity facilities and an absence of cycle paths was found only in neighborhoods in the outer suburbs, whereas patterns characterized by better spatial accessibility to green spaces, proximity facilities and cycle paths were more evenly distributed across the region. Compared to the reference pattern (poor accessibility to green areas and facilities, absence of cycle paths), subjects residing in neighborhoods characterized by high accessibility to green areas and local facilities and by a high density of cycle paths were more likely to walk/cycle, after adjustment for individual and neighborhood sociodemographic characteristics (OR = 2.5 95%CI 1.4-4.6). Body mass index did not differ across patterns. Built environmental patterns were associated with walking and cycling among French adults. These analyses may be useful in determining urban and public health policies aimed at promoting a healthy lifestyle.

Implication of relationship between natural impacts and land use/land cover (LULC) changes of urban area in Mongolia

NASA Astrophysics Data System (ADS)

Gantumur, Byambakhuu; Wu, Falin; Zhao, Yan; Vandansambuu, Battsengel; Dalaibaatar, Enkhjargal; Itiritiphan, Fareda; Shaimurat, Dauryenbyek

2017-10-01

Urban growth can profoundly alter the urban landscape structure, ecosystem processes, and local climates. Timely and accurate information on the status and trends of urban ecosystems is critical to develop strategies for sustainable development and to improve the urban residential environment and living quality. Ulaanbaatar city was urbanized very rapidly caused by herders and farmers, many of them migrating from rural places, have played a big role in this urban expansion (sprawl). Today, 1.3 million residents for about 40% of total population are living in the Ulaanbaatar region. Those human activities influenced stronger to green environments. Therefore, the aim of this study is determined to change detection of land use/land cover (LULC) and estimating their areas for the trend of future by remote sensing and statistical methods. The implications of analysis were provided by change detection methods of LULC, remote sensing spectral indices including normalized difference vegetation index (NDVI), normalized difference water index (NDWI) and normalized difference built-up index (NDBI). In addition, it can relate to urban heat island (UHI) provided by Land surface temperature (LST) with local climate issues. Statistical methods for image processing used to define relations between those spectral indices and change detection images and regression analysis for time series trend in future. Remote sensing data are used by Landsat (TM/ETM+/OLI) satellite images over the period between 1990 and 2016 by 5 years. The advantages of this study are very useful remote sensing approaches with statistical analysis and important to detecting changes of LULC. The experimental results show that the LULC changes can image on the present and after few years and determined relations between impacts of environmental conditions.

Spatiotemporal Analysis of Urban Land Cover Changes in Kigali, Rwanda Using Multitemporal Landsat Data and Landscape Metrics

NASA Astrophysics Data System (ADS)

Mugiraneza, T.; Haas, J.; Ban, Y.

2017-11-01

Mapping urbanization and ensuing environmental impacts using satellite data combined with landscape metrics has become a hot research topic. The objectives of the study are to analyze the spatio-temporal evolution of urbanization patterns of Kigali, Rwanda over the last three decades (from 1984 to 2015) using multitemporal Landsat data and to assess the associated environmental impact using landscape metrics. Landsat images, Normalized Difference Vegetation Index (NDVI), Grey Level Co-occurrence Matrix (GLCM) variance texture and digital elevation model (DEM) data were classified using a support vector machine (SVM). Eight landscape indices were derived from classified images for urbanization environment impact assessment. Seven land cover classes were derived with an overall accuracy exceeding 88 % with Kappa Coefficients around 0.8. As most prominent changes, cropland was reduced considerably in favour of built-up areas that increased from 2,349 ha to 11,579 ha between 1984 and 2015. During those 31 years, the increased number of patches in most land cover classes illustrated landscape fragmentation, especially for forest. The landscape configuration indices demonstrate that in general the land cover pattern remained stable for cropland but it was highly changed in built-up areas. Satellite-based analysis and quantification of urbanization and its effects using landscape metrics are found to be interesting for grassroots and provide a cost-effective method for urban information production. This information can be used for e.g. potential design and implementation of early warning systems that cater for urbanization effects.

Air pollution abatement performances of green infrastructure in open road and built-up street canyon environments - A review

NASA Astrophysics Data System (ADS)

Abhijith, K. V.; Kumar, Prashant; Gallagher, John; McNabola, Aonghus; Baldauf, Richard; Pilla, Francesco; Broderick, Brian; Di Sabatino, Silvana; Pulvirenti, Beatrice

2017-08-01

Intensifying the proportion of urban green infrastructure has been considered as one of the remedies for air pollution levels in cities, yet the impact of numerous vegetation types deployed in different built environments has to be fully synthesised and quantified. This review examined published literature on neighbourhood air quality modifications by green interventions. Studies were evaluated that discussed personal exposure to local sources of air pollution under the presence of vegetation in open road and built-up street canyon environments. Further, we critically evaluated the available literature to provide a better understanding of the interactions between vegetation and surrounding built-up environments and ascertain means of reducing local air pollution exposure using green infrastructure. The net effects of vegetation in each built-up environment are also summarised and possible recommendations for the future design of green infrastructure are proposed. In a street canyon environment, high-level vegetation canopies (trees) led to a deterioration in air quality, while low-level green infrastructure (hedges) improved air quality conditions. For open road conditions, wide, low porosity and tall vegetation leads to downwind pollutant reductions while gaps and high porosity vegetation could lead to no improvement or even deteriorated air quality. The review considers that generic recommendations can be provided for vegetation barriers in open road conditions. Green walls and roofs on building envelopes can also be used as effective air pollution abatement measures. The critical evaluation of the fundamental concepts and the amalgamation of key technical features of past studies by this review could assist urban planners to design and implement green infrastructures in the built environment.

Mapping and Evaluating the Urbanization Process in Northeast China Using DMSP/OLS Nighttime Light Data

PubMed Central

Yi, Kunpeng; Tani, Hiroshi; Li, Qiang; Zhang, Jiquan; Guo, Meng; Bao, Yulong; Wang, Xiufeng; Li, Jing

2014-01-01

In this paper, an Urban Light Index (ULI) is constructed to facilitate analysis and quantitative evaluation of the process of urbanization and expansion rate by using DMSP/OLS Nighttime Light Data during the years from 1992 to 2010. A unit circle urbanization evaluation model is established to perform a comprehensive analysis of the urbanization process of 34 prefecture-level cities in Northeast China. Furthermore, the concept of urban light space is put forward. In this study, urban light space is divided into four types: the core urban area, the transition zone between urban and suburban areas, suburban area and fluorescent space. Proceeding from the temporal and spatial variation of the four types of light space, the pattern of morphologic change and space-time evolution of the four principal cities in Northeast China (Harbin, Changchun, Shenyang, Dalian) is analyzed and given particular attention. Through a correlation analysis between ULI and the traditional urbanization indexes (urban population, proportion of the secondary and tertiary industries in the regional GDP and the built-up area), the advantages and disadvantages as well as the feasibility of using the ULI in the study of urbanization are evaluated. The research results show that ULI has a strong correlation with urban built-up area (R2 = 0.8277). The morphologic change and history of the evolving urban light space can truly reflect the characteristics of urban sprawl. The results also indicate that DMSP/OLS Nighttime Light Data is applicable for extracting urban space information and has strong potential to urbanization research. PMID:24553086

Risk assessment of flood disaster and forewarning model at different spatial-temporal scales

NASA Astrophysics Data System (ADS)

Zhao, Jun; Jin, Juliang; Xu, Jinchao; Guo, Qizhong; Hang, Qingfeng; Chen, Yaqian

2018-05-01

Aiming at reducing losses from flood disaster, risk assessment of flood disaster and forewarning model is studied. The model is built upon risk indices in flood disaster system, proceeding from the whole structure and its parts at different spatial-temporal scales. In this study, on the one hand, it mainly establishes the long-term forewarning model for the surface area with three levels of prediction, evaluation, and forewarning. The method of structure-adaptive back-propagation neural network on peak identification is used to simulate indices in prediction sub-model. Set pair analysis is employed to calculate the connection degrees of a single index, comprehensive index, and systematic risk through the multivariate connection number, and the comprehensive assessment is made by assessment matrixes in evaluation sub-model. The comparison judging method is adopted to divide warning degree of flood disaster on risk assessment comprehensive index with forewarning standards in forewarning sub-model and then the long-term local conditions for proposing planning schemes. On the other hand, it mainly sets up the real-time forewarning model for the spot, which introduces the real-time correction technique of Kalman filter based on hydrological model with forewarning index, and then the real-time local conditions for presenting an emergency plan. This study takes Tunxi area, Huangshan City of China, as an example. After risk assessment and forewarning model establishment and application for flood disaster at different spatial-temporal scales between the actual and simulated data from 1989 to 2008, forewarning results show that the development trend for flood disaster risk remains a decline on the whole from 2009 to 2013, despite the rise in 2011. At the macroscopic level, project and non-project measures are advanced, while at the microcosmic level, the time, place, and method are listed. It suggests that the proposed model is feasible with theory and application, thus offering a way for assessing and forewarning flood disaster risk.

Development of structure-activity relationship for metal oxide nanoparticles

NASA Astrophysics Data System (ADS)

Liu, Rong; Zhang, Hai Yuan; Ji, Zhao Xia; Rallo, Robert; Xia, Tian; Chang, Chong Hyun; Nel, Andre; Cohen, Yoram

2013-05-01

Nanomaterial structure-activity relationships (nano-SARs) for metal oxide nanoparticles (NPs) toxicity were investigated using metrics based on dose-response analysis and consensus self-organizing map clustering. The NP cellular toxicity dataset included toxicity profiles consisting of seven different assays for human bronchial epithelial (BEAS-2B) and murine myeloid (RAW 264.7) cells, over a concentration range of 0.39-100 mg L-1 and exposure time up to 24 h, for twenty-four different metal oxide NPs. Various nano-SAR building models were evaluated, based on an initial pool of thirty NP descriptors. The conduction band energy and ionic index (often correlated with the hydration enthalpy) were identified as suitable NP descriptors that are consistent with suggested toxicity mechanisms for metal oxide NPs and metal ions. The best performing nano-SAR with the above two descriptors, built with support vector machine (SVM) model and of validated robustness, had a balanced classification accuracy of ~94%. An applicability domain for the present data was established with a reasonable confidence level of 80%. Given the potential role of nano-SARs in decision making, regarding the environmental impact of NPs, the class probabilities provided by the SVM nano-SAR enabled the construction of decision boundaries with respect to toxicity classification under different acceptance levels of false negative relative to false positive predictions.Nanomaterial structure-activity relationships (nano-SARs) for metal oxide nanoparticles (NPs) toxicity were investigated using metrics based on dose-response analysis and consensus self-organizing map clustering. The NP cellular toxicity dataset included toxicity profiles consisting of seven different assays for human bronchial epithelial (BEAS-2B) and murine myeloid (RAW 264.7) cells, over a concentration range of 0.39-100 mg L-1 and exposure time up to 24 h, for twenty-four different metal oxide NPs. Various nano-SAR building models were evaluated, based on an initial pool of thirty NP descriptors. The conduction band energy and ionic index (often correlated with the hydration enthalpy) were identified as suitable NP descriptors that are consistent with suggested toxicity mechanisms for metal oxide NPs and metal ions. The best performing nano-SAR with the above two descriptors, built with support vector machine (SVM) model and of validated robustness, had a balanced classification accuracy of ~94%. An applicability domain for the present data was established with a reasonable confidence level of 80%. Given the potential role of nano-SARs in decision making, regarding the environmental impact of NPs, the class probabilities provided by the SVM nano-SAR enabled the construction of decision boundaries with respect to toxicity classification under different acceptance levels of false negative relative to false positive predictions. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr01533e

Assessing opportunities for physical activity in the built environment of children: interrelation between kernel density and neighborhood scale.

PubMed

Buck, Christoph; Kneib, Thomas; Tkaczick, Tobias; Konstabel, Kenn; Pigeot, Iris

2015-12-22

Built environment studies provide broad evidence that urban characteristics influence physical activity (PA). However, findings are still difficult to compare, due to inconsistent measures assessing urban point characteristics and varying definitions of spatial scale. Both were found to influence the strength of the association between the built environment and PA. We simultaneously evaluated the effect of kernel approaches and network-distances to investigate the association between urban characteristics and physical activity depending on spatial scale and intensity measure. We assessed urban measures of point characteristics such as intersections, public transit stations, and public open spaces in ego-centered network-dependent neighborhoods based on geographical data of one German study region of the IDEFICS study. We calculated point intensities using the simple intensity and kernel approaches based on fixed bandwidths, cross-validated bandwidths including isotropic and anisotropic kernel functions and considering adaptive bandwidths that adjust for residential density. We distinguished six network-distances from 500 m up to 2 km to calculate each intensity measure. A log-gamma regression model was used to investigate the effect of each urban measure on moderate-to-vigorous physical activity (MVPA) of 400 2- to 9.9-year old children who participated in the IDEFICS study. Models were stratified by sex and age groups, i.e. pre-school children (2 to <6 years) and school children (6-9.9 years), and were adjusted for age, body mass index (BMI), education and safety concerns of parents, season and valid weartime of accelerometers. Association between intensity measures and MVPA strongly differed by network-distance, with stronger effects found for larger network-distances. Simple intensity revealed smaller effect estimates and smaller goodness-of-fit compared to kernel approaches. Smallest variation in effect estimates over network-distances was found for kernel intensity measures based on isotropic and anisotropic cross-validated bandwidth selection. We found a strong variation in the association between the built environment and PA of children based on the choice of intensity measure and network-distance. Kernel intensity measures provided stable results over various scales and improved the assessment compared to the simple intensity measure. Considering different spatial scales and kernel intensity methods might reduce methodological limitations in assessing opportunities for PA in the built environment.

The household-based socio-economic deprivation index in Setiu Wetlands, Malaysia

NASA Astrophysics Data System (ADS)

Zakaria, Syerrina; May, Chin Sin; Rahman, Nuzlinda Abdul

2017-08-01

Deprivation index usually used in public health study. At the same time, deprivation index can also use to measure the level of deprivation in an area or a village. These indices are also referred as the index of inequalities or disadvantage. Even though, there are many indices that have been built before. But it is believed to be less appropriate to use the existing indices to be applied in other countries or areas which had different socio-economic conditions and different geographical characteristics. The objective of this study is to construct the index based on the socio-economic factors in Setiu Wetlands (Jajaran Merang, Jajaran Setiu and Jajaran Kuala Besut) in Terengganu Malaysia which is defined as weighted household-based socioeconomic deprivation index. This study has employed the variables based on income level, education level and employment rate obtained from questionnaire which are acquired from 64 villages included 1024 respondents. The factor analysis is used to extract the latent variables or observed variables into smaller amount of components or factors. By using factor analysis, one factor is extracted from 3 latent variables. This factor known as socioeconomic deprivation index. Based on the result, the areas with a lower index values until high index values were identified.

Extraction of Built-Up Areas Using Convolutional Neural Networks and Transfer Learning from SENTINEL-2 Satellite Images

NASA Astrophysics Data System (ADS)

Bramhe, V. S.; Ghosh, S. K.; Garg, P. K.

2018-04-01

With rapid globalization, the extent of built-up areas is continuously increasing. Extraction of features for classifying built-up areas that are more robust and abstract is a leading research topic from past many years. Although, various studies have been carried out where spatial information along with spectral features has been utilized to enhance the accuracy of classification. Still, these feature extraction techniques require a large number of user-specific parameters and generally application specific. On the other hand, recently introduced Deep Learning (DL) techniques requires less number of parameters to represent more abstract aspects of the data without any manual effort. Since, it is difficult to acquire high-resolution datasets for applications that require large scale monitoring of areas. Therefore, in this study Sentinel-2 image has been used for built-up areas extraction. In this work, pre-trained Convolutional Neural Networks (ConvNets) i.e. Inception v3 and VGGNet are employed for transfer learning. Since these networks are trained on generic images of ImageNet dataset which are having very different characteristics from satellite images. Therefore, weights of networks are fine-tuned using data derived from Sentinel-2 images. To compare the accuracies with existing shallow networks, two state of art classifiers i.e. Gaussian Support Vector Machine (SVM) and Back-Propagation Neural Network (BP-NN) are also implemented. Both SVM and BP-NN gives 84.31 % and 82.86 % overall accuracies respectively. Inception-v3 and VGGNet gives 89.43 % of overall accuracy using fine-tuned VGGNet and 92.10 % when using Inception-v3. The results indicate high accuracy of proposed fine-tuned ConvNets on a 4-channel Sentinel-2 dataset for built-up area extraction.

Environmental Quality Index webinar

EPA Pesticide Factsheets

Environmental Quality index, data reduction approaches to help improve statistical efficiency, summarizing information on the wider environment humans are exposed to. air, water, land, built, socio-demographic, human and environmental health

Piloting a 'spatial isolation' index: the built environment and sexual and drug use risks to sex workers.

PubMed

Deering, Kathleen N; Rusch, Melanie; Amram, Ofer; Chettiar, Jill; Nguyen, Paul; Feng, Cindy X; Shannon, Kate

2014-05-01

Employing innovative mapping and spatial analyses of individual and neighbourhood environment data, we examined the social, physical and structural features of overlapping street-based sex work and drug scenes and explored the utility of a 'spatial isolation index' in explaining exchanging sex for drugs and exchanging sex while high. Analyses drew on baseline interview and geographic data (January 2010-October 2011) from a large prospective cohort of street and off-street sex workers (SWs) in Metropolitan Vancouver and external publically-available, neighbourhood environment data. An index measuring 'spatial isolation' was developed from seven indicators measuring features of the built environment within 50m buffers (e.g., industrial or commercial zoning, lighting) surrounding sex work environments. Bivariate and multivariable logistic regression was used to examine associations between the two outcomes (exchanged sex for drugs; exchanged sex while high) and the index, as well as each individual indicator. Of 510 SWs, 328 worked in street-based/outdoor environments (e.g., streets, parks, alleys) and were included in the analyses. In multivariable analysis, increased spatial isolation surrounding street-based/outdoor SWs' main places of servicing clients as measured with the index was significantly associated with exchanging sex for drugs. Exchanging sex for drugs was also significantly positively associated with an indicator of the built environment suggesting greater spatial isolation (increased percent of parks) and negatively associated with those suggesting decreased spatial isolation (increased percent commercial areas, increased count of lighting, increased building footprint). Exchanging sex while high was negatively associated with increased percent of commercial zones but this association was removed when adjusting for police harassment. The results from our exploratory study highlight how built environment shapes risks within overlapping street-based sex work and drug scenes through the development of a novel index comprised of multiple indicators of the built environment available through publicly available data, This study informs the important role that spatially-oriented responses, such as safer-environment interventions, and structural responses, such as decriminalization of sex work can play in improving the health, safety and well-being of SWs. Copyright © 2013 Elsevier B.V. All rights reserved.

Development and Applications of a Comprehensive Land Use Classification and Map for the US

PubMed Central

Theobald, David M.

2014-01-01

Land cover maps reasonably depict areas that are strongly converted by human activities, but typically are unable to resolve low-density but widespread development patterns. Data products specifically designed to resolve land uses complement land cover datasets and likely improve our ability to understand the extent and complexity of human modification. Methods for developing a comprehensive land use classification system are described, and a map of land use for the conterminous United States is presented to reveal what we are doing on the land. The comprehensive, detailed and high-resolution dataset was developed through spatial analysis of nearly two-dozen publicly-available, national spatial datasets – predominately based on census housing, employment, and infrastructure, as well as land cover from satellite imagery. This effort resulted in 79 land use classes that fit within five main land use groups: built-up, production, recreation, conservation, and water. Key findings from this study are that built-up areas occupy 13.6% of mainland US, but that the majority of this occurs as low-density exurban/rural residential (9.1% of the US), while more intensive built-up land uses occupy 4.5%. For every acre of urban and suburban residential land, there are 0.13 commercial, 0.07 industrial, 0.48 institutional, and 0.29 acres of interstates/highways. This database can be used to address a variety of natural resource applications, and I provide three examples here: an entropy index of the diversity of land uses for smart-growth planning, a power-law scaling of metropolitan area population to developed footprint, and identifying potential conflict areas by delineating the urban interface. PMID:24728210

Monitoring the expansion of built-up areas in Seberang Perai region, Penang State, Malaysia

NASA Astrophysics Data System (ADS)

Samat, N.

2014-02-01

Rapid urbanization has caused land use transformation and encroachment of built environment into arable agriculture land. Uncontrolled expansion could bring negative impacts to society, space and the environment. Therefore, information on expansion and future spatial pattern of built-up areas would be useful for planners and decision makers in formulating policies towards managing and planning for sustainable urban development. This study demonstrates the usage of Geographic Information System in monitoring the expansion of built-up area in Seberang Perai region, Penang State, Malaysia. Built-up area has increased by approximately 20% between 1990 and 2001 and further increased by 12% between 2001 and 2007. New development is expected to continue encroach into existing open space and agriculture area since those are the only available land in this study area. The information on statistics of the expansion of built-up area and future spatial pattern of urban expansion were useful in planning and managing urban spatial growth.

[Hemolysis Performance Analysis of the Centrifugal Maglev Blood Pump].

PubMed

Wang, Yiwen; Zhang, Fan; Fang, Yuan; Dong, Baichuan; Zhou, Liang

2016-05-01

In order to analyze and study the hemolysis performance of the centrifugal maglev blood pump, which was designed by ourselves, this paper built the mathematical model and computational fluid dynamics analyzed it using Fluent. Then we set up the in vitro hemolysis experiment platform, in case of the design condition, the content of free hemoglobin and hematocrit in plasma were measured in a certain time interval, and calculated the normalized index of hemolysis of the blood pump. The numerical simulation results show the internal static pressure distribution is smooth inside the pump, the wal shear stress inside the pump is less than 150 Pa. Therefore, the red blood cel damage and exposure time is independent. The normalized index of hemolysis is (0.002 9±0.000 7) mg/L, which is in accordance with human physiological requirement.

Estimation of Mangrove Net Primary Production and Carbon Sequestration service using Light Use Efficiency model in the Sunderban Biosphere region, India

NASA Astrophysics Data System (ADS)

Sannigrahi, Srikanta; Sen, Somnath; Paul, Saikat

2016-04-01

Net Primary Production (NPP) of mangrove ecosystem and its capacity to sequester carbon from the atmosphere may be used to quantify the regulatory ecosystem services. Three major group of parameters has been set up as BioClimatic Parameters (BCP): (Photosynthetically Active Radiation (PAR), Absorbed PAR (APAR), Fraction of PAR (FPAR), Photochemical Reflectance Index (PRI), Light Use Efficiency (LUE)), BioPhysical Parameters (BPP) :(Normalize Difference Vegetation Index (NDVI), scaled NDVI, Enhanced Vegetation Index (EVI), scaled EVI, Optimised and Modified Soil Adjusted Vegetation Index (OSAVI, MSAVI), Leaf Area Index (LAI)), and Environmental Limiting Parameters (ELP) (Temperature Stress (TS), Land Surface Water Index (LSWI), Normalize Soil Water Index (NSWI), Water Stress Scalar (WS), Inversed WS (iWS) Land Surface Temperature (LST), scaled LST, Vapor Pressure Deficit (VPD), scaled VPD, and Soil Water Deficit Index (SWDI)). Several LUE models namely Carnegie Ames Stanford Approach (CASA), Eddy Covariance - LUE (EC-LUE), Global Production Efficiency Model (GloPEM), Vegetation Photosynthesis Model (VPM), MOD NPP model, Temperature and Greenness Model (TG), Greenness and Radiation model (GR) and MOD17 was adopted in this study to assess the spatiotemporal nature of carbon fluxes. Above and Below Ground Biomass (AGB & BGB) was calculated using field based estimation of OSAVI and NDVI. Microclimatic zonation has been set up to assess the impact of coastal climate on environmental limiting factors. MODerate Resolution Imaging Spectroradiometer (MODIS) based yearly Gross Primary Production (GPP) and NPP product MOD17 was also tested with LUE based results with standard model validation statistics: Root Mean Square of Error (RMSE), Mean Absolute Error (MEA), Bias, Coefficient of Variation (CV) and Coefficient of Determination (R2). The performance of CASA NPP was tested with the ground based NPP with R2 = 0.89 RMSE = 3.28 P = 0.01. Among the all adopted models, EC-LUE and VPM models has explained the maximum variances (>80%) in comparison to the other model. Study result has also showed that the BPP has explained the maximum model variances (>93%) followed by BCP (>65%) and ELP (>50%). Scaled WS, iWS, LST, VPD, NDVI was performed better in a minimum ELP condition whereas surface moisture and wetness was highly correlated with the AGB and NPP (R2 = 0.86 RMSE = 1.83). During this study period (2000-2013), it was found that there was a significantly declining trend (R2 = 0.32 P = 0.05) of annual NPP and the maximum decrease was found in the eastern part where built-up area was mainly accounted for reduction of NPP. BCP are explained higher variances (>80%) in the optimum climatic condition exist along the coastal stretches in comparison to the landward extent (>45%).

Exposure to 50 Hz magnetic field in apartment buildings with built-in transformer stations in Hungary.

PubMed

Thuróczy, György; Jánossy, Gábor; Nagy, Noémi; Bakos, József; Szabó, Judit; Mezei, Gábor

2008-01-01

Exposure to 50 Hz magnetic field (MF) was evaluated in 31 multi-level apartment buildings with built-in step-down transformer stations. In each building, three apartments were selected: one apartment located immediately above the transformer room (index apartment), one located on the same floor and one on a higher floor. The mean value of measured MFs was 0.98 microT in apartments above transformers, 0.13 microT on the same floor, and 0.1 microT in on higher floors. The mean measured MF value was higher than 0.2 microT in 30 (97%) index apartments, 4 (14%) on the same floor as the index apartments and 4 (13%) on higher floors. The corresponding numbers were 25 (81%), 0 and 0, respectively, when 0.4 microT was used as cut-point. It is concluded that apartments in building with built-in transformers can be reliably classified into high and low-exposure categories based on their location in relation to transformers.

Wind energy utilization: A bibliography with abstracts - Cumulative volume 1944/1974

NASA Technical Reports Server (NTRS)

1975-01-01

Bibliography, up to 1974 inclusive, of articles and books on utilization of wind power in energy generation. Worldwide literature is surveyed, and short abstracts are provided in many cases. The citations are grouped by subject: (1) general; (2) utilization; (3) wind power plants; (4) wind power generators (rural, synchronous, remote station); (5) wind machines (motors, pumps, turbines, windmills, home-built); (6) wind data and properties; (7) energy storage; and (8) related topics (control and regulation devices, wind measuring devices, blade design and rotors, wind tunnel simulation, aerodynamics). Gross-referencing is aided by indexes of authors, corporate sources, titles, and keywords.

TREAT neutron-radiography facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, L.J.

1981-01-01

The TREAT reactor was built as a transient irradiation test reactor. By taking advantage of built-in system features, it was possible to add a neutron-radiography facility. This facility has been used over the years to radiograph a wide variety and large number of preirradiated fuel pins in many different configurations. Eight different specimen handling casks weighing up to 54.4 t (60 T) can be accommodated. Thermal, epithermal, and track-etch radiographs have been taken. Neutron-radiography service can be provided for specimens from other reactor facilities, and the capacity for storing preirradiated specimens also exists.

Liquid sinusoidal pressure measurement by laser interferometry based on the refractive index of water.

PubMed

Yang, Jun; Fan, Shangchun; Li, Cheng; Guo, Zhanshe; Li, Bo; Shi, Bo

2016-12-01

A new method with laser interferometry is used to enhance the traceability for sinusoidal pressure calibration in water. The laser vibrometer measures the dynamic pressure based on the acousto-optic effect. The relation of the refractive index of water and the optical path length with the pressure's change is built based on the Lorentz-Lorenz equation, and the conversion coefficients are tested by static calibration in situ. A device with a piezoelectric transducer and resonant pressure pipe with water is set up to generate sinusoidal pressure up to 20 kHz. With the conversion coefficients, the reference sinusoidal pressure is measured by the laser interferometer for pressure sensors' dynamic calibration. The experiment results show that under 10 kHz, the measurement results between the laser vibrometer and a piezoelectric sensor are in basic agreement and indicate that this new method and its measurement system are feasible in sinusoidal pressure calibration. Some disturbing components including small amplitude, temperature change, pressure maldistribution, and glass windows' vibration are also analyzed, especially for the dynamic calibrations above 10 kHz.

Correlations between measurement time and different expansibility of the elastic tape on the rectus femoris and body sway index with plyometric exercise.

PubMed

Yoon, Jung-Gyu

2018-01-01

[Purpose] The purpose of this study was to examine correlations between measurement time and different expansibility of the elastic tape on the rectus femoris and body sway index with plyometric exercise. [Subjects and Methods] The subjects of this study were 24 healthy men. C90 area, C90 angle, trace length, sway average velocity for body sway index were measured using a force plate by BT4. The collected data were analyzed using Kendall's coefficient of concordance. [Results] All of body sway index on measuring follow up 24 hours after removing tape were significantly decreased than before and right after plyometric exercise. No significant correlations were found between body sway index and different expansibility of the elastic tape. [Conclusion] It appears that different expansibility of the elastic tape does not affect the ability to body sway index. Carry over effect of taping was verified on measuring follow up 24 hours after removing tape through the decreasing body sway index.

Determination of the molecular weight of low-molecular-weight heparins by using high-pressure size exclusion chromatography on line with a triple detector array and conventional methods.

PubMed

Bisio, Antonella; Mantegazza, Alessandra; Vecchietti, Davide; Bensi, Donata; Coppa, Alessia; Torri, Giangiacomo; Bertini, Sabrina

2015-03-19

The evaluation of weight average molecular weight (Mw) and molecular weight distribution represents one of the most controversial aspects concerning the characterization of low molecular weight heparins (LMWHs). As the most commonly used method for the measurement of such parameters is high performance size exclusion chromatography (HP-SEC), the soundness of results mainly depends on the appropriate calibration of the chromatographic columns used. With the aim of meeting the requirement of proper Mw standards for LMWHs, in the present work the determination of molecular weight parameters (Mw and Mn) by HP-SEC combined with a triple detector array (TDA) was performed. The HP-SEC/TDA technique permits the evaluation of polymeric samples by exploiting the combined and simultaneous action of three on-line detectors: light scattering detectors (LALLS/RALLS); refractometer and viscometer. Three commercial LMWH samples, enoxaparin, tinzaparin and dalteparin, a γ-ray depolymerized heparin (γ-Hep) and its chromatographic fractions, and a synthetic pentasaccharide were analysed by HP-SEC/TDA. The same samples were analysed also with a conventional HP-SEC method employing refractive index (RI) and UV detectors and two different chromatographic column set, silica gel and polymeric gel columns. In both chromatographic systems, two different calibration curves were built up by using (i) γ-Hep chromatographic fractions and the corresponding Mw parameters obtained via HP-SEC/TDA; (ii) the whole γ-Hep preparation with broad Mw dispersion and the corresponding cumulative distribution function calculated via HP-SEC/TDA. In addition, also a chromatographic column calibration according to European Pharmacopoeia indication was built up. By comparing all the obtained results, some important differences among Mw and size distribution values of the three LMWHs were found with the five different calibration methods and with HP-SEC/TDA method. In particular, the detection of the lower molecular weight components turned out to be the most critical aspect. Whereas HP-SEC/TDA may underestimate species under 2 KDa when present in low concentration, other methods appeared to emphasize their content.

Estimating the value of a Country's built assets: investment-based exposure modelling for global risk assessment

NASA Astrophysics Data System (ADS)

Daniell, James; Pomonis, Antonios; Gunasekera, Rashmin; Ishizawa, Oscar; Gaspari, Maria; Lu, Xijie; Aubrecht, Christoph; Ungar, Joachim

2017-04-01

In order to quantify disaster risk, there is a demand and need for determining consistent and reliable economic value of built assets at national or sub national level exposed to natural hazards. The value of the built stock in the context of a city or a country is critical for risk modelling applications as it allows for the upper bound in potential losses to be established. Under the World Bank probabilistic disaster risk assessment - Country Disaster Risk Profiles (CDRP) Program and rapid post-disaster loss analyses in CATDAT, key methodologies have been developed that quantify the asset exposure of a country. In this study, we assess the complementary methods determining value of building stock through capital investment data vs aggregated ground up values based on built area and unit cost of construction analyses. Different approaches to modelling exposure around the world, have resulted in estimated values of built assets of some countries differing by order(s) of magnitude. Using the aforementioned methodology of comparing investment data based capital stock and bottom-up unit cost of construction values per square meter of assets; a suitable range of capital stock estimates for built assets have been created. A blind test format was undertaken to compare the two types of approaches from top-down (investment) and bottom-up (construction cost per unit), In many cases, census data, demographic, engineering and construction cost data are key for bottom-up calculations from previous years. Similarly for the top-down investment approach, distributed GFCF (Gross Fixed Capital Formation) data is also required. Over the past few years, numerous studies have been undertaken through the World Bank Caribbean and Central America disaster risk assessment program adopting this methodology initially developed by Gunasekera et al. (2015). The range of values of the building stock is tested for around 15 countries. In addition, three types of costs - Reconstruction cost (building back to the standard required by building codes); Replacement cost (gross capital stock) and Book value (net capital stock - depreciated value of assets) are discussed and the differences in methodologies assessed. We then examine historical costs (reconstruction and replacement) and losses (book value) of natural disasters versus this upper bound of capital stock in various locations to examine the impact of a reasonable capital stock estimate. It is found that some historic loss estimates in publications are not reasonable given the value of assets at the time of the event. This has applications for quantitative disaster risk assessment and development of country disaster risk profiles, economic analyses and benchmarking upper loss limits of built assets damaged due to natural hazards.

EPA's Environmental Quality Index Supports Public Health

EPA Pesticide Factsheets

The Environmental Quality Index (EQI) pulls data from five domains: air, water, land, built, and sociodemographic environments to provide a county-by-county snapshot of overall environmental quality across the entire U.S.

Design component method for sensitivity analysis of built-up structures

NASA Technical Reports Server (NTRS)

Choi, Kyung K.; Seong, Hwai G.

1986-01-01

A 'design component method' that provides a unified and systematic organization of design sensitivity analysis for built-up structures is developed and implemented. Both conventional design variables, such as thickness and cross-sectional area, and shape design variables of components of built-up structures are considered. It is shown that design of components of built-up structures can be characterized and system design sensitivity expressions obtained by simply adding contributions from each component. The method leads to a systematic organization of computations for design sensitivity analysis that is similar to the way in which computations are organized within a finite element code.

Identifying built environmental patterns using cluster analysis and GIS: Relationships with walking, cycling and body mass index in French adults

PubMed Central

2012-01-01

Background Socio-ecological models suggest that both individual and neighborhood characteristics contribute to facilitating health-enhancing behaviors such as physical activity. Few European studies have explored relationships between local built environmental characteristics, recreational walking and cycling and weight status in adults. The aim of this study was to identify built environmental patterns in a French urban context and to assess associations with recreational walking and cycling behaviors as performed by middle-aged adult residents. Methods We used a two-step procedure based on cluster analysis to identify built environmental patterns in the region surrounding Paris, France, using measures derived from Geographic Information Systems databases on green spaces, proximity facilities (destinations) and cycle paths. Individual data were obtained from participants in the SU.VI.MAX cohort; 1,309 participants residing in the Ile-de-France in 2007 were included in this analysis. Associations between built environment patterns, leisure walking/cycling data (h/week) and measured weight status were assessed using multinomial logistic regression with adjustment for individual and neighborhood characteristics. Results Based on accessibility to green spaces, proximity facilities and availability of cycle paths, seven built environmental patterns were identified. The geographic distribution of built environmental patterns in the Ile-de-France showed that a pattern characterized by poor spatial accessibility to green spaces and proximity facilities and an absence of cycle paths was found only in neighborhoods in the outer suburbs, whereas patterns characterized by better spatial accessibility to green spaces, proximity facilities and cycle paths were more evenly distributed across the region. Compared to the reference pattern (poor accessibility to green areas and facilities, absence of cycle paths), subjects residing in neighborhoods characterized by high accessibility to green areas and local facilities and by a high density of cycle paths were more likely to walk/cycle, after adjustment for individual and neighborhood sociodemographic characteristics (OR = 2.5 95%CI 1.4-4.6). Body mass index did not differ across patterns. Conclusions Built environmental patterns were associated with walking and cycling among French adults. These analyses may be useful in determining urban and public health policies aimed at promoting a healthy lifestyle. PMID:22620266

Simulation of imperfections in plastic lenses - transferring local refractive index changes into surface shape modifications

NASA Astrophysics Data System (ADS)

Arasa, Josep; Pizarro, Carles; Blanco, Patricia

2016-06-01

Injection molded plastic lenses have continuously improved their performance regarding optical quality and nowadays are as usual as glass lenses in image forming devices. However, during the manufacturing process unavoidable fluctuations in material density occur, resulting in local changes in the distribution of refractive index, which degrade the imaging properties of the polymer lens. Such material density fluctuations correlate to phase delays, which opens a path for their mapping. However, it is difficult to transfer the measured variations in refractive index into conventional optical simulation tool. Thus, we propose a method to convert the local variations in refractive index into local changes of one surface of the lens, which can then be described as a free-form surface, easy to introduce in conventional simulation tools. The proposed method was tested on a commercial gradient index (GRIN) lens for a set of six different object positions, using the MTF sagittal and tangential cuts to compare the differences between the real lens and a lens with homogenous refractive index, and the last surface converted into a free-form shape containing the internal refractive index changes. The same procedure was used to reproduce the local refractive index changes of an injected plastic lens with local index changes measured using an in-house built polariscopic arrangement, showing the capability of the method to provide successful results.

A New Automatic Method of Urban Areas Mapping in East Asia from LANDSAT Data

NASA Astrophysics Data System (ADS)

XU, R.; Jia, G.

2012-12-01

Cities, as places where human activities are concentrated, account for a small percent of global land cover but are frequently cited as the chief causes of, and solutions to, climate, biogeochemistry, and hydrology processes at local, regional, and global scales. Accompanying with uncontrolled economic growth, urban sprawl has been attributed to the accelerating integration of East Asia into the world economy and involved dramatic changes in its urban form and land use. To understand the impact of urban extent on biogeophysical processes, reliable mapping of built-up areas is particularly essential in eastern cities as a result of their characteristics of smaller patches, more fragile, and a lower fraction of the urban landscape which does not have natural than in the West. Segmentation of urban land from other land-cover types using remote sensing imagery can be done by standard classification processes as well as a logic rule calculation based on spectral indices and their derivations. Efforts to establish such a logic rule with no threshold for automatically mapping are highly worthwhile. Existing automatic methods are reviewed, and then a proposed approach is introduced including the calculation of the new index and the improved logic rule. Following this, existing automatic methods as well as the proposed approach are compared in a common context. Afterwards, the proposed approach is tested separately in cities of large, medium, and small scale in East Asia selected from different LANDSAT images. The results are promising as the approach can efficiently segment urban areas, even in the presence of more complex eastern cities. Key words: Urban extraction; Automatic Method; Logic Rule; LANDSAT images; East AisaThe Proposed Approach of Extraction of Urban Built-up Areas in Guangzhou, China

Interaction between heterogeneous environmental quality domains (air, water, land, socio-demographic and built environment) on preterm birth.

EPA Science Inventory

Environmental exposures are often measured individually, though many occur in tandem. To address aggregate exposures, a county-level Environmental Quality Index (EQI) representing five environmental domains (air, water, land, built and sociodemographic) was constructed. Recent st...

Inherent optical properties of the coccolithophore: Emiliania huxleyi.

PubMed

Zhai, Peng-Wang; Hu, Yongxiang; Trepte, Charles R; Winker, David M; Josset, Damien B; Lucker, Patricia L; Kattawar, George W

2013-07-29

A realistic nonspherical model for Emiliania huxleyi (EHUX) is built, based on electron micrographs of coccolithophore cells. The Inherent Optical Properties (IOP) of the EHUX are then calculated numerically by using the discrete dipole approximation. The coccolithophore model includes a near-spherical core with the refractive index of 1.04 + m(i)j, and a carbonate shell formed by smaller coccoliths with refractive index of 1.2 + m(i)j, where m(i) = 0 or 0.01 and j(2) = -1. The reported IOP are the Mueller scattering matrix, backscattering probability, and depolarization ratio. Our calculation shows that the Mueller matrices of coccolithophores show different angular dependence from those of coccoliths.

Surface plasmon resonance optical cavity enhanced refractive index sensing.

PubMed

Giorgini, A; Avino, S; Malara, P; Gagliardi, G; Casalino, M; Coppola, G; Iodice, M; Adam, P; Chadt, K; Homola, J; De Natale, P

2013-06-01

We report on a method for surface plasmon resonance (SPR) refractive index sensing based on direct time-domain measurements. An optical resonator is built around an SPR sensor, and its photon lifetime is measured as a function of loss induced by refractive index variations. The method does not rely on any spectroscopic analysis or direct intensity measurement. Time-domain measurements are practically immune to light intensity fluctuations and thus lead to high resolution. A proof of concept experiment is carried out in which a sensor response to liquid samples of different refractive indices is measured. A refractive index resolution of the current system, extrapolated from the reproducibility of cavity-decay time determinations over 133 s, is found to be about 10(-5) RIU. The possibility of long-term averaging suggests that measurements with a resolution better than 10(-7) RIU/√Hz are within reach.

Description of Dogs and Owners in Outdoor Built-Up Areas and Their More-Than-Human Issues

NASA Astrophysics Data System (ADS)

Gaunet, Florence; Pari-Perrin, Elodie; Bernardin, Geneviève

2014-09-01

Tensions are generated by the inevitable presence of dogs accompanying humans in cities. Built-up outdoor areas, spaces that are "in between" the home and dog parks, are widely frequented by dogs and their owners. The present case study, performed in Lyon (France), is the first to provide a description of these dyads in areas that vary according to terrain, district, dog legislation and use in three areas: a busy street where dogs are allowed and a park and a square where dogs are forbidden. Dog-owner profiles were identified. They adjusted their presence differently across areas and according to anthropogenic and ecological pressures, such as day of the week, time of day, weather, frequentation, and legislation. They mutually adapted their behaviors. Interactions between dogs or owners and other social agents were few; dogs primarily sniffed and urinated. There was little barking, no aggression, minor impact on the environment, and, despite instances of dogs appropriating forbidden areas and dogs off their leashes, the dogs seemed to go virtually unnoticed. The study shows how the need for more-than-human areas is evident in outdoor built-up areas (for instance, the results on types of interaction and activity across areas, absence of a leash, and appropriation of forbidden areas) as well as how the cultural and natural aspects of dogs play out. The results suggest that dog regulations should be adjusted in outdoor built-up areas and that dog parks should be developed.

Piloting a ‘Spatial Isolation’ Index: The Built Environment and Sexual and Drug Use Risks to Sex Workers

PubMed Central

Deering, Kathleen N; Rusch, Melanie; Amram, Ofer; Chettiar, Jill; Nguyen, Paul; Feng, Cindy X; Shannon, Kate

2014-01-01

Background Employing innovative mapping and spatial analyses of individual and neighborhood environment data, we examined the social, physical and structural features of overlapping street-based sex work and drug scenes and explored the utility of a ‘spatial isolation index’ in explaining exchanging sex for drugs and exchanging sex while high. Methods Analyses drew on baseline interview and geographic data (Jan/10-Oct/11) from a large prospective cohort of street and off-street sex workers (SWs) in Metropolitan Vancouver and external publically-available, neighborhood environment data. An index measuring ‘spatial isolation’ was developed from seven indicators measuring features of the built environment within 50m buffers (e.g. industrial or commercial zoning, lighting) surrounding sex work environments. Bivariate and multivariable logistic regression was used to examine associations between the two outcomes (exchanged sex for drugs; exchanged sex while high) and the index, as well as each individual indicator. Results Of 510 SWs, 328 worked in street-based/outdoor environments (e.g. streets, parks, alleys) and were included in the analyses. In multivariable analysis, increased spatial isolation surrounding street-based/outdoor SWs’ main places of servicing clients as measured with the index was significantly associated with exchanging sex for drugs. Exchanging sex for drugs was also significantly positively associated with an indicator of the built environment suggesting greater spatial isolation (increased percent of parks) and negatively associated with those suggesting decreased spatial isolation (increased percent commercial areas, increased count of lighting, increased building footprint). Exchanging sex while high was negatively associated with increased percent of commercial zones but this association was removed when adjusting for police harassment. Conclusions The results from our exploratory study highlight how built environment shapes risks within overlapping street-based sex work and drug scenes through the development of a novel index comprised of multiple indicators of the built environment available through publicly available data, This study informs the important role that spatially-oriented responses, such as safer-environment interventions, and structural responses, such as decriminalization of sex work can play in improving the health, safety and well-being of SWs. PMID:24433813

Data Sources for an Environmental Quality Index: Availability, Quality, and Utility

PubMed Central

Rappazzo, Kristen; Messer, Lynne C.

2011-01-01

Objectives. An environmental quality index (EQI) for all counties in the United States is under development to explore the relationship between environmental insults and human health. The EQI is potentially useful for investigators researching health disparities to account for other concurrent environmental conditions. This article focused on the identification and assessment of data sources used in developing the EQI. Data source strengths, limitations, and utility were addressed. Methods. Five domains were identified that contribute to environmental quality: air, water, land, built, and sociodemographic environments. An inventory of possible data sources was created. Data sources were evaluated for appropriate spatial and temporal coverage and data quality. Results. The overall data inventory identified multiple data sources for each domain. From the inventory (187 sources, 617 records), the air, water, land, built environment, and sociodemographic domains retained 2, 9, 7, 4, and 2 data sources for inclusion in the EQI, respectively. However, differences in data quality, geographic coverage, and data availability existed between the domains. Conclusions. The data sources identified for use in the EQI may be useful to researchers, advocates, and communities to explore specific environmental quality questions. PMID:21836111

The Downside of Marketization: A Multilevel Analysis of Housing Tenure and Types in Reform-era Urban China

PubMed Central

Fu, Qiang; Zhu, Yushu; Ren, Qiang

2015-01-01

Based on data from the 2005 National Population Sample Survey and compiled covariates of 205 prefectures, this research adopted principal-component and multilevel-logistic analyses to study homeownership in urban China. Although the housing reform has severed the link between work units and residence, working in state sectors (government, state-owned enterprises and collective firms) remained significant in determining a household’s entitlement to reform-era housing with heavy subsidies or better qualities. While the prefecture-level index of marketization reduced local homeownership of self-built housing, affordable housing and privatized housing, its effect is moderated by cross-level interactions with income, education and working in state sectors across different types of housing. Meanwhile, the index of political and market connections promoted all types of homeownership except for self-built housing. By situating the downside of marketization within a context of urban transformation, this research not only challenges the teleological premise of the neoliberal market transition theory but calls for research on institutional dynamics and social consequences of urban transformation in China. PMID:25432608

The downside of marketization: a multilevel analysis of housing tenure and types in reform-era urban China.

PubMed

Fu, Qiang; Zhu, Yushu; Ren, Qiang

2015-01-01

Based on data from the 2005 National Population Sample Survey and compiled covariates of 205 prefectures, this research adopted principal-component and multilevel-logistic analyses to study homeownership in urban China. Although the housing reform has severed the link between work units and residence, working in state sectors (government, state-owned enterprises and collective firms) remained significant in determining a household's entitlement to reform-era housing with heavy subsidies or better qualities. While the prefecture-level index of marketization reduced local homeownership of self-built housing, affordable housing and privatized housing, its effect is moderated by cross-level interactions with income, education and working in state sectors across different types of housing. Meanwhile, the index of political and market connections promoted all types of homeownership except for self-built housing. By situating the downside of marketization within a context of urban transformation, this research not only challenges the teleological premise of the neoliberal market transition theory but calls for research on institutional dynamics and social consequences of urban transformation in China. Copyright © 2014 Elsevier Inc. All rights reserved.

[Assessment of land use environmental impacts in urban built-up area: a case study in main built-up area of Nanchang City].

PubMed

Chen, Wen-Bo; Liu, Shi-Yu; Yu, Dun; Zou, Qiu-Ming

2009-07-01

Based on the relevant studies of land use environmental impacts and the characteristics of urban land use, a conceptual model on the assessment of land use environmental impacts in urban built-up area was established. This model grouped the land use environmental impacts in built-up area into four basic processes, i. e., detailization, abstractization, matching, and evaluation. A case study was conducted in the main built-up area of Nanchang City, with noise, smell, dust, and hazard as the impact factors. In the test area, noise had a widespread impact, its impacting area accounting for 59% of the total, smell and dust impacts centralized in the east and south parts, while hazard impact was centralized in the southeast part, an industrial area. This assessment model of four basic processes was practical, and could provide basis for the decision-making of urban land use management and planning.

Vegetation classification and soil moisture calculation using land surface temperature (LST) and vegetation index (VI)

NASA Astrophysics Data System (ADS)

Liu, Liangyun; Zhang, Bing; Xu, Genxing; Zheng, Lanfen; Tong, Qingxi

2002-03-01

In this paper, the temperature-missivity separating (TES) method and normalized difference vegetation index (NDVI) are introduced, and the hyperspectral image data are analyzed using land surface temperature (LST) and NDVI channels which are acquired by Operative Module Imaging Spectral (OMIS) in Beijing Precision Agriculture Demonstration Base in Xiaotangshan town, Beijing in 26 Apr, 2001. Firstly, the 6 kinds of ground targets, which are winter wheat in booting stage and jointing stage, bare soil, water in ponds, sullage in dry ponds, aquatic grass, are well classified using LST and NDVI channels. Secondly, the triangle-like scatter-plot is built and analyzed using LST and NDVI channels, which is convenient to extract the information of vegetation growth and soil's moisture. Compared with the scatter-plot built by red and near-infrared bands, the spectral distance between different classes are larger, and the samples in the same class are more convergent. Finally, we design a logarithm VIT model to extract the surface soil water content (SWC) using LST and NDVI channel, which works well, and the coefficient of determination, R2, between the measured surface SWC and the estimated is 0.634. The mapping of surface SWC in the wheat area are calculated and illustrated, which is important for scientific irrigation and precise agriculture.

Study on the effect of carbon nanotube coating on the refractive index sensing sensitivity of fiber modal interferometer

NASA Astrophysics Data System (ADS)

Zhang, Ya-nan; Xie, Wen-ge; Wang, Jianzhang; Wang, Pengzhao

2018-01-01

Refractive index sensing of liquid is important in the domain of chemistry and biology. Fiber optical sensors provide an excellent way to measure the refractive index due to their feasible integration to other fiber optics components, high sensitivity, small size, and distributed sensing. However, conventional optical sensors have different shortages. To find a practical way to measure the refractive index of liquid, this paper intended to combine Carbon Nanotube (CNT) with non-core fiber (NCF) to prepare a kind of modal interferometer sensor and to explore the effect of CNT coating on refractive index sensing properties of the modal interferometer. Firstly, a structure of single mode non-core single mode (SNS) fiber with a CNT film coating was proposed and simulated. The simulation results showed that the CNT coating could improve the refractive index sensitivity of the interferometer sensor. Then in the experiment part, the CNT solution was fabricated and deposited onto the NCF, and a refractive index sensing system was built to examine the property of the CNT-coated SNS interferometer sensor. During the experiment, the influence factors of sensitivity were summarized by testing the sensing performance under different conditions, and it was demonstrated that the CNT coating could improve the contrast of the interference spectrum, and also had the possibility to increase the refractive index sensitivity of the interferometer sensor.

A New MI-Based Visualization Aided Validation Index for Mining Big Longitudinal Web Trial Data

PubMed Central

Zhang, Zhaoyang; Fang, Hua; Wang, Honggang

2016-01-01

Web-delivered clinical trials generate big complex data. To help untangle the heterogeneity of treatment effects, unsupervised learning methods have been widely applied. However, identifying valid patterns is a priority but challenging issue for these methods. This paper, built upon our previous research on multiple imputation (MI)-based fuzzy clustering and validation, proposes a new MI-based Visualization-aided validation index (MIVOOS) to determine the optimal number of clusters for big incomplete longitudinal Web-trial data with inflated zeros. Different from a recently developed fuzzy clustering validation index, MIVOOS uses a more suitable overlap and separation measures for Web-trial data but does not depend on the choice of fuzzifiers as the widely used Xie and Beni (XB) index. Through optimizing the view angles of 3-D projections using Sammon mapping, the optimal 2-D projection-guided MIVOOS is obtained to better visualize and verify the patterns in conjunction with trajectory patterns. Compared with XB and VOS, our newly proposed MIVOOS shows its robustness in validating big Web-trial data under different missing data mechanisms using real and simulated Web-trial data. PMID:27482473

Correlations between measurement time and different expansibility of the elastic tape on the rectus femoris and body sway index with plyometric exercise

PubMed Central

Yoon, Jung-Gyu

2018-01-01

[Purpose] The purpose of this study was to examine correlations between measurement time and different expansibility of the elastic tape on the rectus femoris and body sway index with plyometric exercise. [Subjects and Methods] The subjects of this study were 24 healthy men. C90 area, C90 angle, trace length, sway average velocity for body sway index were measured using a force plate by BT4. The collected data were analyzed using Kendall’s coefficient of concordance. [Results] All of body sway index on measuring follow up 24 hours after removing tape were significantly decreased than before and right after plyometric exercise. No significant correlations were found between body sway index and different expansibility of the elastic tape. [Conclusion] It appears that different expansibility of the elastic tape does not affect the ability to body sway index. Carry over effect of taping was verified on measuring follow up 24 hours after removing tape through the decreasing body sway index. PMID:29410564

Forest cover change prediction using hybrid methodology of geoinformatics and Markov chain model: A case study on sub-Himalayan town Gangtok, India

NASA Astrophysics Data System (ADS)

Mukhopadhyay, Anirban; Mondal, Arun; Mukherjee, Sandip; Khatua, Dipam; Ghosh, Subhajit; Mitra, Debasish; Ghosh, Tuhin

2014-08-01

In the Himalayan states of India, with increasing population and activities, large areas of forested land are being converted into other land-use features. There is a definite cause and effect relationship between changing practice for development and changes in land use. So, an estimation of land use dynamics and a futuristic trend pattern is essential. A combination of geospatial and statistical techniques were applied to assess the present and future land use/land cover scenario of Gangtok, the subHimalayan capital of Sikkim. Multi-temporal satellite imageries of the Landsat series were used to map the changes in land use of Gangtok from 1990 to 2010. Only three major land use classes (built-up area and bare land, step cultivated area, and forest) were considered as the most dynamic land use practices of Gangtok. The conventional supervised classification, and spectral indices-based thresholding using NDVI (Normalized Difference Vegetation Index) and SAVI (Soil Adjusted Vegetation Index) were applied along with the accuracy assessments. Markov modelling was applied for prediction of land use/land cover change and was validated. SAVI provides the most accurate estimate, i.e., the difference between predicted and actual data is minimal. Finally, a combination of Markov modelling and SAVI was used to predict the probable land-use scenario in Gangtok in 2020 AD, which indicted that more forest areas will be converted for step cultivation by the year 2020.

On-chip optical mode conversion based on dynamic grating in photonic-phononic hybrid waveguide

PubMed Central

Chen, Guodong; Zhang, Ruiwen; Sun, Junqiang

2015-01-01

We present a scheme for reversible and tunable on-chip optical mode conversion based on dynamic grating in a hybrid photonic-phononic waveguide. The dynamic grating is built up through the acousto-optic effect and the theoretical model of the optical mode conversion is developed by considering the geometrical deformation and refractive index change. Three kinds of mode conversions are able to be realized using the same hybrid waveguide structure in a large bandwidth by only changing the launched acoustic frequency. The complete mode conversion can be achieved by choosing a proper acoustic power under a given waveguide length. PMID:25996236

Face recognition from unconstrained three-dimensional face images using multitask sparse representation

NASA Astrophysics Data System (ADS)

Bentaieb, Samia; Ouamri, Abdelaziz; Nait-Ali, Amine; Keche, Mokhtar

2018-01-01

We propose and evaluate a three-dimensional (3D) face recognition approach that applies the speeded up robust feature (SURF) algorithm to the depth representation of shape index map, under real-world conditions, using only a single gallery sample for each subject. First, the 3D scans are preprocessed, then SURF is applied on the shape index map to find interest points and their descriptors. Each 3D face scan is represented by keypoints descriptors, and a large dictionary is built from all the gallery descriptors. At the recognition step, descriptors of a probe face scan are sparsely represented by the dictionary. A multitask sparse representation classification is used to determine the identity of each probe face. The feasibility of the approach that uses the SURF algorithm on the shape index map for face identification/authentication is checked through an experimental investigation conducted on Bosphorus, University of Milano Bicocca, and CASIA 3D datasets. It achieves an overall rank one recognition rate of 97.75%, 80.85%, and 95.12%, respectively, on these datasets.

Four decades urban growth and land use change in Samara Russia through remote sensing and GIS techniques

NASA Astrophysics Data System (ADS)

Boori, Mukesh Singh; Choudhary, Komal; Kupriyanov, Alexander; Kovelskiy, Viktor

2015-12-01

This study illustrates the spatio-temporal dynamics of urban growth and land use changes in Samara city, Russia from 1975 to 2015. Landsat satellite imageries of five different time periods from 1975 to 2015 were acquired and quantify the changes with the help of ArcGIS 10.1 Software. By applying classification methods to the satellite images four main types of land use were extracted: water, built-up, forest and grassland. Then, the area coverage for all the land use types at different points in time were measured and coupled with population data. The results demonstrate that, over the entire study period, population was increased from 1146 thousand people to 1244 thousand from 1975 to 1990 but later on first reduce and then increase again, now 1173 thousand population. Built-up area is also change according to population. The present study revealed an increase in built-up by 37.01% from 1975 to 1995, than reduce -88.83% till 2005 and an increase by 39.16% from 2005 to 2015, along with the increase in population, migration from rural areas owing to the economic growth and technological advantages associated with urbanization. Information on urban growth, land use and land cover change study is very useful to local government and urban planners for the betterment of future plans to sustainable development of the city.

The built environment & the impact of neighborhood characteristics on youth sexual risk behavior in Cape Town, South Africa

PubMed Central

Burns, Paul A.; Snow, Rachel C.

2012-01-01

Youth sexual risk behavior is often described in social terms, and there has been limited attention to date on how measures of the built environment, including access to municipal services, impact sexual risk behavior, particularly in resource-limited countries. Using the Cape Area Panel Study, we assessed the impact of neighborhood conditions (six single items and a built environment index (BEI)), net of individual socio-demographic factors. The results suggest that built environment factors are associated with sexual risk behavior. Also, the magnitude of associations between built environment factors and sexual risk behavior was more pronounced for females than for males. PMID:22704913

Understanding the Independent and Joint Associations of the Home and Workplace Built Environments on Cardiorespiratory Fitness and Body Mass Index

PubMed Central

Hoehner, Christine M.; Allen, Peg; Barlow, Carolyn E.; Marx, Christine M.; Brownson, Ross C.; Schootman, Mario

2013-01-01

This observational study examined the associations of built environment features around the home and workplace with cardiorespiratory fitness (CRF) based on a treadmill test and body mass index (BMI) (weight (kg)/height (m)2). The study included 8,857 adults aged 20–88 years who completed a preventive medical examination in 2000–2007 while living in 12 Texas counties. Analyses examining workplace neighborhood characteristics included a subset of 4,734 participants. Built environment variables were derived around addresses by using geographic information systems. Models were adjusted for individual-level and census block group–level demographics and socioeconomic status, smoking, BMI (in CRF models), and all other home or workplace built environment variables. CRF was associated with higher intersection density, higher number of private exercise facilities around the home and workplace, larger area of vegetation around the home, and shorter distance to the closest city center. Aside from vegetation, these same built environment features around the home were also associated with BMI. Participants who lived and worked in neighborhoods in the lowest tertiles for intersection density and the number of private exercise facilities had lower CRF and higher BMI values than participants who lived and worked in higher tertiles for these variables. This study contributes new evidence to suggest that built environment features around homes and workplaces may affect health. PMID:23942215

Mueller matrix imaging study to detect the dental demineralization

NASA Astrophysics Data System (ADS)

Chen, Qingguang; Shen, Huanbo; Wang, Binqiang

2018-01-01

Mueller matrix is an optical parameter invasively to reveal the structure information of anisotropic material. Dental tissue has the ordered structure including dental enamel prism and dentinal tubule. The ordered structure of teeth surface will be destroyed by demineralization. The structure information has the possibility to reflect the dental demineralization. In the paper, the experiment setup was built to obtain the Mueller matrix images based on the dual- wave plate rotation method. Two linear polarizer and two quarter-wave plate were rotated by electric control revolving stage respectively to capture 16 images at different group of polarization states. Therefore, Mueller matrix image can be calculated from the 16 images. On this basis, depolarization index, the diattenuation index and retardance index of the Mueller matrix were analyzed by Lu-Chipman polarization decomposition method. Mueller matrix images of artificial demineralized enamels at different stages were analyzed and the results show the possibility to detect the dental demineralization using Mueller matrix imaging method.

The Better Mousetrap...Can Be Built by Engineers.

ERIC Educational Resources Information Center

McBride, Matthew

2003-01-01

Describes the growth of the INSPEC database developed by the Institution of Electrical Engineers. Highlights include an historical background of its growth from "Science Abstracts"; production methods, including computerization; indexing, including controlled (thesaurus-based), uncontrolled, chemical, and numerical indexing; and the…

A remote sensing-assisted risk rating study to predict oak decline and recovery in the Missouri Ozark Highlands, USA

Treesearch

Cuizhen Wang; Hong S. He; John M. Kabrick

2008-01-01

Forests in the Ozark Highlands underwent widespread oak decline affected by severe droughts in 1999-2000. In this study, the differential normalized difference water index was calculated to detect crown dieback. A multi-factor risk rating system was built to map risk levels of stands. As a quick response to drought, decline in 2000 mostly occurred in stands at low to...

An Evaluation of h-Index as a Measure of Research Productivity Among Canadian Academic Plastic Surgeons.

PubMed

Hu, Jiayi; Gholami, Arian; Stone, Nicholas; Bartoszko, Justyna; Thoma, Achilleas

2018-02-01

Evaluation of research productivity among plastic surgeons can be complex. The Hirsch index (h-index) was recently introduced to evaluate both the quality and quantity of one's research activity. It has been proposed to be valuable in assessing promotions and grant funding within academic medicine, including plastic surgery. Our objective is to evaluate research productivity among Canadian academic plastic surgeons using the h-index. A list of Canadian academic plastic surgeons was obtained from websites of academic training programs. The h-index was retrieved using the Scopus database. Relevant demographic and academic factors were collected and their effects on the h-index were analyzed using the t test and Wilcoxon Mann-Whitney U test. Nominal and categorical variables were analyzed using χ 2 test and 1-way analysis of variance. Univariate and multivariate models were built a priori. All P values were 2 sided, and P < .05 was considered to be significant. Our study on Canadian plastic surgeons involved 175 surgeons with an average h-index of 7.6. Over 80% of the surgeons were male. Both univariable and multivariable analysis showed that graduate degree ( P < .0001), academic rank ( P = .03), and years in practice ( P < .0001) were positively correlated with h-index. Limitations of the study include that the Scopus database and the websites of training programs were not always up-to-date. The h-index is a novel tool for evaluating research productivity in academic medicine, and this study shows that the h-index can also serve as a useful metric for measuring research productivity in the Canadian plastic surgery community. Plastic surgeons would be wise to familiarize themselves with the h-index concept and should consider using it as an adjunct to existing metrics such as total publication number.

28. MAP SHOWING LOCATION OF ARVFS FACILITY AS BUILT. SHOWS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. MAP SHOWING LOCATION OF ARVFS FACILITY AS BUILT. SHOWS LINCOLN BOULEVARD, BIG LOST RIVER, AND NAVAL REACTORS FACILITY. F.C. TORKELSON DRAWING NUMBER 842-ARVFS-101-2. DATED OCTOBER 12, 1965. INEL INDEX CODE NUMBER: 075 0101 851 151969. - Idaho National Engineering Laboratory, Advanced Reentry Vehicle Fusing System, Scoville, Butte County, ID

Developing an infrastructure-informed index for pedestrians and bicyclists.

DOT National Transportation Integrated Search

2016-01-01

In this report, an infrastructure-informed index is developed for pedestrians and bicyclists to relate the natural and built environment with its impact on perceived travel distance and time. The objective is to develop an easy-to-use metric for use ...

Comparison of Vegetation Indices from Rpas and SENTINEL-2 Imagery for Detecting Permanent Pastures

NASA Astrophysics Data System (ADS)

Piragnolo, M.; Lusiani, G.; Pirotti, F.

2018-04-01

Permanent pastures (PP) are defined as grasslands, which are not subjected to any tillage, but only to natural growth. They are important for local economies in the production of fodder and pastures (Ali et al. 2016). Under these definitions, a pasture is permanent when it is not under any crop-rotation, and its production is related to only irrigation, fertilization and mowing. Subsidy payments to landowners require monitoring activities to determine which sites can be considered PP. These activities are mainly done with visual field surveys by experienced personnel or lately also using remote sensing techniques. The regional agency for SPS subsidies, the Agenzia Veneta per i Pagamenti in Agricoltura (AVEPA) takes care of monitoring and control on behalf of the Veneto Region using remote sensing techniques. The investigation integrate temporal series of Sentinel-2 imagery with RPAS. Indeed, the testing area is specific region were the agricultural land is intensively cultivated for production of hay harvesting four times every year between May and October. The study goal of this study is to monitor vegetation presence and amount using the Normalized Difference Vegetation Index (NDVI), the Soil-adjusted Vegetation Index (SAVI), the Normalized Difference Water Index (NDWI), and the Normalized Difference Built Index (NDBI). The overall objective is to define for each index a set of thresholds to define if a pasture can be classified as PP or not and recognize the mowing.

Neighbourhood walkability, leisure-time and transport-related physical activity in a mixed urban-rural area.

PubMed

de Sa, Eric; Ardern, Chris I

2014-01-01

Objectives. To develop a walkability index specific to mixed rural/suburban areas, and to explore the relationship between walkability scores and leisure time physical activity. Methods. Respondents were geocoded with 500 m and 1,000 m buffer zones around each address. A walkability index was derived from intersections, residential density, and land-use mix according to built environment measures. Multivariable logistic regression models were used to quantify the association between the index and physical activity levels. Analyses used cross-sectional data from the 2007-2008 Canadian Community Health Survey (n = 1158; ≥18 y). Results. Respondents living in highly walkable 500 m buffer zones (upper quartiles of the walkability index) were more likely to walk or cycle for leisure than those living in low-walkable buffer zones (quartile 1). When a 1,000 m buffer zone was applied, respondents in more walkable neighbourhoods were more likely to walk or cycle for both leisure-time and transport-related purposes. Conclusion. Developing a walkability index can assist in exploring the associations between measures of the built environment and physical activity to prioritize neighborhood change.

A robust Multi-Band Water Index (MBWI) for automated extraction of surface water from Landsat 8 OLI imagery

NASA Astrophysics Data System (ADS)

Wang, Xiaobiao; Xie, Shunping; Zhang, Xueliang; Chen, Cheng; Guo, Hao; Du, Jinkang; Duan, Zheng

2018-06-01

Surface water is vital resources for terrestrial life, while the rapid development of urbanization results in diverse changes in sizes, amounts, and quality of surface water. To accurately extract surface water from remote sensing imagery is very important for water environment conservations and water resource management. In this study, a new Multi-Band Water Index (MBWI) for Landsat 8 Operational Land Imager (OLI) images is proposed by maximizing the spectral difference between water and non-water surfaces using pure pixels. Based on the MBWI map, the K-means cluster method is applied to automatically extract surface water. The performance of MBWI is validated and compared with six widely used water indices in 29 sites of China. Results show that our proposed MBWI performs best with the highest accuracy in 26 out of the 29 test sites. Compared with other water indices, the MBWI results in lower mean water total errors by a range of 9.31%-25.99%, and higher mean overall accuracies and kappa coefficients by 0.87%-3.73% and 0.06-0.18, respectively. It is also demonstrated for MBWI in terms of robustly discriminating surface water from confused backgrounds that are usually sources of surface water extraction errors, e.g., mountainous shadows and dark built-up areas. In addition, the new index is validated to be able to mitigate the seasonal and daily influences resulting from the variations of the solar condition. MBWI holds the potential to be a useful surface water extraction technology for water resource studies and applications.

Eutrophication in the Yunnan Plateau lakes: the influence of lake morphology, watershed land use, and socioeconomic factors.

PubMed

Liu, Wenzhi; Li, Siyue; Bu, Hongmei; Zhang, Quanfa; Liu, Guihua

2012-03-01

Lakes play an important role in socioeconomic development and ecological balance in China, but their water quality has deteriorated considerably in recent decades. In this study, we investigated the spatial-temporal variations of eutrophication parameters (secchi depth, total nitrogen, total phosphorus, chemical oxygen demand, chlorophyll-a, trophic level index, and trophic state index) and their relationships with lake morphology, watershed land use, and socioeconomic factors in the Yunnan Plateau lakes. Results indicated that about 77.8% of lakes were eutrophic according to trophic state index. The plateau lakes showed spatial variations in water quality and could be classified into high-nutrient and low-nutrient groups. However, because watersheds were dominated by vegetation, all eutrophication parameters except chlorophyll-a showed no significant differences between the wet and dry seasons. Lake depth, water residence time, volume, and percentage of built-up land were significantly related to several eutrophication parameters. Agricultural land use and social-economic factors had no significant correlation with all eutrophication parameters. Stepwise regression analyses demonstrated that lake depth and water residence time accounted for 73.8% to 87.6% of the spatial variation of single water quality variables, respectively. Redundancy analyses indicated that lake morphology, watershed land use, and socioeconomic factors together explained 74.3% of the spatial variation in overall water quality. The results imply that water quality degradation in the plateau lakes may be mainly due to the domestic and industrial wastewaters. This study will improve our understanding of the determinants of lake water quality and help to design efficient strategies for controlling eutrophication in the plateau region.

Standard deviation index for stimulated Brillouin scattering suppression with different homogeneities.

PubMed

Ran, Yang; Su, Rongtao; Ma, Pengfei; Wang, Xiaolin; Zhou, Pu; Si, Lei

2016-05-10

We present a new quantitative index of standard deviation to measure the homogeneity of spectral lines in a fiber amplifier system so as to find the relation between the stimulated Brillouin scattering (SBS) threshold and the homogeneity of the corresponding spectral lines. A theoretical model is built and a simulation framework has been established to estimate the SBS threshold when input spectra with different homogeneities are set. In our experiment, by setting the phase modulation voltage to a constant value and the modulation frequency to different values, spectral lines with different homogeneities can be obtained. The experimental results show that the SBS threshold increases negatively with the standard deviation of the modulated spectrum, which is in good agreement with the theoretical results. When the phase modulation voltage is confined to 10 V and the modulation frequency is set to 80 MHz, the standard deviation of the modulated spectrum equals 0.0051, which is the lowest value in our experiment. Thus, at this time, the highest SBS threshold has been achieved. This standard deviation can be a good quantitative index in evaluating the power scaling potential in a fiber amplifier system, which is also a design guideline in suppressing the SBS to a better degree.

Construction of a High Temperature Teg Measurement System for the Evaluation of Thermoelectric Oxide Modules

NASA Astrophysics Data System (ADS)

Populoh, S.; Trottmann, M.; Brunko, O. C.; Thiel, P.; Weidenkaff, A.

2013-08-01

A dedicated test stand was developed and built to characterize the efficiency, power output and open circuit voltage of various thermoelectric generators (TEGs) based on tellurides, heusler compounds and thermoelectric oxides. The test stand allows measurements of TEGs of sizes up to 4 cm × 4 cm at hot side temperatures up to 1150 K in different atmospheres. Special care was taken about the heat flux measurement by precise measurement of the temperature distribution within the reference block. In order to demonstrate the functionality of the test stand thermoelectric oxide modules (TOM) were built from n-type perovskite-type manganates and p-type cuprates. The modules were tested regarding their stability, maximum power output and efficiency at temperatures up to 1100 K. The TOMs withstand large temperature gradients and operated in ambient air yielding high power densities.

Single tapered fiber tip for simultaneous measurements of thickness, refractive index and distance to a sample.

PubMed

Moreno-Hernández, Carlos; Monzón-Hernández, David; Hernández-Romano, Iván; Villatoro, Joel

2015-08-24

We demonstrate the capability of an air cavity Fabry-Perot interferometer (FPI), built with a tapered lead-in fiber tip, to measure three parameters simultaneously, distance, group refractive index and thickness of transparent samples introduced in the cavity. Tapering the lead-in fiber enhances the light coupling back efficiency, therefore is possible to enlarge the air cavity without a significant deterioration of the fringe visibility. Fourier transformation, used to analyze the reflected optical spectrum of our FPI, simplify the calculus to determine the position, thickness and refractive index. Samples made of 7 different glasses; fused silica, BK7, BalF5, SF2, BaF51, SF15, and glass slides were used to test our FPI. Each sample was measured nine times and the results for position, thickness and refractive index showed differences of ± 0.7%, ± 0.1%, and ± 0.16% respectively. The evolution of thickness and refractive index of a block of polydimethylsiloxane (PDMS) elastomer due to temperature changes in the range of 25°C to 90°C were also measured. The coefficients of the thermal expansion and thermo-optic estimated were α = 4.71x10(-4)/°C and dn/dT = -4.66 x10(-4) RIU/°C, respectively.

Residual Strength Characterization of Unitized Structures Fabricated Using Different Manufacturing Technologies

NASA Technical Reports Server (NTRS)

Seshadri, B. R.; Smith, S. W.; Johnston, W. M.

2008-01-01

This viewgraph presentation describes residual strength analysis of integral structures fabricated using different manufacturing procedures. The topics include: 1) Built-up and Integral Structures; 2) Development of Prediction Methodology for Integral Structures Fabricated using different Manufacturing Procedures; 3) Testing Facility; 4) Fracture Parameters Definition; 5) Crack Branching in Integral Structures; 6) Results and Discussion; and 7) Concluding Remarks.

Effect of different warm-up procedures on the performance of resistance training exercises.

PubMed

Ribeiro, Alex S; Romanzini, Marcelo; Schoenfeld, Brad J; Souza, Mariana F; Avelar, Ademar; Cyrino, Edilson S

2014-08-01

Warm-up has been shown to mediate numerous acute physiological alterations that have been purported to confer beneficial effects on performance. This study investigated the acute effects of different warm-up procedures on resistance training performance. Employing a randomized, counterbalanced crossover design, 15 men performed 3 exercises (4 sets of bench press, squat, and arm curl at 80% of 1RM) to failure in 4 conditions (control, specific, aerobic, and combined). Outcome measures included the sum of repetitions and a fatigue index measuring the decline between sets. There was no significant difference for the sum of repetitions or for fatigue index among conditions for the 3 exercises. Performance in the resistance training exercises was not influenced by warm-up.

Physical and chemical characterization of representative samples of recycled rubber from end-of-life tires.

PubMed

Re Depaolini, Andrea; Bianchi, Giancarlo; Fornai, Daniele; Cardelli, Angela; Badalassi, Marco; Cardelli, Camillo; Davoli, Enrico

2017-10-01

A large number of end-of-life tires (ELTs) were sampled and classified by type, age and origin to obtain recycled rubber samples representative of the materials placed on the Italian market. The selected recycled tire rubber samples were physically and chemically characterized and a chemometric approach was used to determine correlations. The polycyclic aromatic hydrocarbons (PAHs) content was correlated to the aromaticity index and a model was built to establish the H-Bay aromaticity index (H-Bay) from the PAH concentrations. ELT of different origin and age produced in non-European countries generally had higher PAH content and a higher H-Bay index. H-Bay values of all the samples were lower than the REACH limits and old tires had higher aromatic content than recent ones, possibly due to the replacement of aromatic oils in tire production. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Study of water masses variability in the Mediterranean Sea using in-situ data / NEMO-Med12 model.

NASA Astrophysics Data System (ADS)

Margirier, Félix; Testor, Pierre; Mortier, Laurent; Arsouze, Thomas; Bosse, Anthony; Houpert, Loic; Hayes, Dan

2016-04-01

In the past 10 years, numerous observation programs in the Mediterranean deployed autonomous platforms (moorings, argo floats, gliders) and thus considerably increased the number of in-situ observations and the data coverage. In this study, we analyse time series built with profile data on interannual scales. Sorting data in regional boxes, we follow the evolution of different water masses in the basin and generate indexes to characterize their evolution. We then put those indexes in relation with external (atmospheric) forcings and present an intercomparison with the NEMO-Med12 model to estimate both the skill of the model and the relevance of the data-sampling in reproducing the evolution of water masses properties.

[Discussion on theory and indes system of Chinese material medical regionalization].

PubMed

Zhang, Xiaobo; Guo, Lanping; Zhou, Tao; Huang, Luqi

2010-09-01

The paper discusses the theory regarding to the Chinese material medical (CMM) regionalization. It is based on the studying of papers and practical experience in the field of CMM regionalization. The basic theories of CMM regionalization are laws of territorial differentiation and location theory. The basic principles are excellent quality of CMM, difference, similarity and practicability. The study objects are CMM resources, natural environment and social environment. The definition of CMM regionalization is that study on the laws of spatial pattern of resources and regional system in the field of CMM,then regionalize it based on this kind of spatial pattern and law. The index system is built based on the study of the theory,principle,object and index of CMM regionalization.

High reliability solid refractive index matching materials for field installable connections in FTTH network

NASA Astrophysics Data System (ADS)

Saito, Kotaro; Kihara, Mitsuru; Shimizu, Tomoya; Yoneda, Keisuke; Kurashima, Toshio

2015-06-01

We performed environmental and accelerated aging tests to ensure the long-term reliability of solid type refractive index matching material at a splice point. Stable optical characteristics were confirmed in environmental tests based on an IEC standard. In an accelerated aging test at 140 °C, which is very much higher than the specification test temperature, the index matching material itself and spliced fibers passing through it had steady optical characteristics. Then we performed an accelerated aging test on an index matching material attached to a built-in fiber before splicing it in the worst condition, which is different from the normal use configuration. As a result, we confirmed that the repeated insertion and removal of fiber for splicing resulted in failure. We consider that the repetition of adhesion between index matching material and fibers causes the splice to degrade. With this result, we used the Arrhenius model to estimate a median lifetime of about 68 years in a high temperature environment of 60 °C. Thus solid type index matching material at a splice point is highly reliable over long periods under normal conditions of use.

An Evaluation of Population Density Mapping and Built up Area Estimates in Sri Lanka Using Multiple Methodologies

NASA Astrophysics Data System (ADS)

Engstrom, R.; Soundararajan, V.; Newhouse, D.

2017-12-01

In this study we examine how well multiple population density and built up estimates that utilize satellite data compare in Sri Lanka. The population relationship is examined at the Gram Niladhari (GN) level, the lowest administrative unit in Sri Lanka from the 2011 census. For this study we have two spatial domains, the whole country and a 3,500km2 sub-sample, for which we have complete high spatial resolution imagery coverage. For both the entire country and the sub-sample we examine how consistent are the existing publicly available measures of population constructed from satellite imagery at predicting population density? For just the sub-sample we examine how well do a suite of values derived from high spatial resolution satellite imagery predict population density and how does our built up area estimate compare to other publicly available estimates. Population measures were obtained from the Sri Lankan census, and were downloaded from Facebook, WorldPoP, GPW, and Landscan. Percentage built-up area at the GN level was calculated from three sources: Facebook, Global Urban Footprint (GUF), and the Global Human Settlement Layer (GHSL). For the sub-sample we have derived a variety of indicators from the high spatial resolution imagery. Using deep learning convolutional neural networks, an object oriented, and a non-overlapping block, spatial feature approach. Variables calculated include: cars, shadows (a proxy for building height), built up area, and buildings, roof types, roads, type of agriculture, NDVI, Pantex, and Histogram of Oriented Gradients (HOG) and others. Results indicate that population estimates are accurate at the higher, DS Division level but not necessarily at the GN level. Estimates from Facebook correlated well with census population (GN correlation of 0.91) but measures from GPW and WorldPop are more weakly correlated (0.64 and 0.34). Estimates of built-up area appear to be reliable. In the 32 DSD-subsample, Facebook's built- up area measure is highly correlated with our built-up measure (correlation of 0.9). Preliminary regression results based on variables selected from Lasso-regressions indicate that satellite indicators have exceptionally strong predictive power in predicting GN level population level and density with an out of sample r-squared of 0.75 and 0.72 respectively.

A comparison study of convective and microphysical parameterization schemes associated with lightning occurrence in southeastern Brazil using the WRF model

NASA Astrophysics Data System (ADS)

Zepka, G. D.; Pinto, O.

2010-12-01

The intent of this study is to identify the combination of convective and microphysical WRF parameterizations that better adjusts to lightning occurrence over southeastern Brazil. Twelve thunderstorm days were simulated with WRF model using three different convective parameterizations (Kain-Fritsch, Betts-Miller-Janjic and Grell-Devenyi ensemble) and two different microphysical schemes (Purdue-Lin and WSM6). In order to test the combinations of parameterizations at the same time of lightning occurrence, a comparison was made between the WRF grid point values of surface-based Convective Available Potential Energy (CAPE), Lifted Index (LI), K-Index (KI) and equivalent potential temperature (theta-e), and the lightning locations nearby those grid points. Histograms were built up to show the ratio of the occurrence of different values of these variables for WRF grid points associated with lightning to all WRF grid points. The first conclusion from this analysis was that the choice of microphysics did not change appreciably the results as much as different convective schemes. The Betts-Miller-Janjic parameterization has generally worst skill to relate higher magnitudes for all four variables to lightning occurrence. The differences between the Kain-Fritsch and Grell-Devenyi ensemble schemes were not large. This fact can be attributed to the similar main assumptions used by these schemes that consider entrainment/detrainment processes along the cloud boundaries. After that, we examined three case studies using the combinations of convective and microphysical options without the Betts-Miller-Janjic scheme. Differently from the traditional verification procedures, fields of surface-based CAPE from WRF 10 km domain were compared to the Eta model, satellite images and lightning data. In general the more reliable convective scheme was Kain-Fritsch since it provided more consistent distribution of the CAPE fields with respect to satellite images and lightning data.

Fine-Scale Population Estimation by 3D Reconstruction of Urban Residential Buildings

PubMed Central

Wang, Shixin; Tian, Ye; Zhou, Yi; Liu, Wenliang; Lin, Chenxi

2016-01-01

Fine-scale population estimation is essential in emergency response and epidemiological applications as well as urban planning and management. However, representing populations in heterogeneous urban regions with a finer resolution is a challenge. This study aims to obtain fine-scale population distribution based on 3D reconstruction of urban residential buildings with morphological operations using optical high-resolution (HR) images from the Chinese No. 3 Resources Satellite (ZY-3). Specifically, the research area was first divided into three categories when dasymetric mapping was taken into consideration. The results demonstrate that the morphological building index (MBI) yielded better results than built-up presence index (PanTex) in building detection, and the morphological shadow index (MSI) outperformed color invariant indices (CIIT) in shadow extraction and height retrieval. Building extraction and height retrieval were then combined to reconstruct 3D models and to estimate population. Final results show that this approach is effective in fine-scale population estimation, with a mean relative error of 16.46% and an overall Relative Total Absolute Error (RATE) of 0.158. This study gives significant insights into fine-scale population estimation in complicated urban landscapes, when detailed 3D information of buildings is unavailable. PMID:27775670

Spatial generalised linear mixed models based on distances.

PubMed

Melo, Oscar O; Mateu, Jorge; Melo, Carlos E

2016-10-01

Risk models derived from environmental data have been widely shown to be effective in delineating geographical areas of risk because they are intuitively easy to understand. We present a new method based on distances, which allows the modelling of continuous and non-continuous random variables through distance-based spatial generalised linear mixed models. The parameters are estimated using Markov chain Monte Carlo maximum likelihood, which is a feasible and a useful technique. The proposed method depends on a detrending step built from continuous or categorical explanatory variables, or a mixture among them, by using an appropriate Euclidean distance. The method is illustrated through the analysis of the variation in the prevalence of Loa loa among a sample of village residents in Cameroon, where the explanatory variables included elevation, together with maximum normalised-difference vegetation index and the standard deviation of normalised-difference vegetation index calculated from repeated satellite scans over time. © The Author(s) 2013.

Setting of index system of environmental and economic accounting of water

NASA Astrophysics Data System (ADS)

Tan, Yarong

2017-10-01

To realize the quality advancement of integrated water management in China, a scientific and perfect index system of environmental and economic accounting should be built. At present, the water shortage in China becomes increasingly serious, which further highlights the importance of efficient water management and improving the index system of water economic accounting. Based on the internal structure of the new statistical method of environmental and economic accounting, this paper focuses on analyzing and discussing the index system which it should have.

A spatio-temporal index for heat vulnerability assessment.

PubMed

Kershaw, Suzanne E; Millward, Andrew A

2012-12-01

The public health consequences of extreme heat events are felt most intensely in metropolitan areas where population density is high and the presence of the urban heat island phenomenon exacerbates the potential for prolonged exposure. This research develops an approach to map potential heat stress on humans by combining temperature and relative humidity into an index of apparent temperature. We use ordinary kriging to generate hourly prediction maps describing apparent temperature across the Greater Toronto Area, Canada. Meteorological data were obtained from 65 locations for 6 days in 2008 when extreme heat alerts were issued for the City of Toronto. Apparent temperature and exposure duration were integrated in a single metric, humidex degree hours (HDH), and mapped. The results show a significant difference in apparent temperature between built and natural locations from 3 PM to 7 AM; this discrepancy was greatest at 12 AM where built locations had a mean of 2.8 index values larger, t(71) = 5.379, p < 0.001. Spatial trends in exposure to heat stress (apparent temperature, ≥ 30°C) show the downtown core of the City of Toronto and much of Mississauga (west of Toronto) as likely to experience hazardous levels of prolonged heat and humidity (HDH ≥ 72) during a heat alert. We recommend that public health officials use apparent temperature and exposure duration to develop spatially explicit heat vulnerability assessment tools; HDH is one approach that unites these risk factors into a single metric.

The Role of Neighborhood Characteristics and the Built Environment in Understanding Racial/Ethnic Disparities in Childhood Obesity

PubMed Central

Sharifi, Mona; Sequist, Thomas D; Rifas-Shiman, Sheryl L; Melly, Steven J; Duncan, Dustin T; Horan, Christine M; Smith, Renata L; Marshall, Richard; Taveras, Elsie M

2016-01-01

Background Childhood obesity prevalence remains high and racial/ethnic disparities may be widening. Studies have examined the role of health behavioral differences. Less is known regarding neighborhood and built environment mediators of disparities. The objective of this study is to examine the extent to which racial/ethnic disparities in elevated child body mass index (BMI) are explained by neighborhood socioeconomic status (SES) and built environment. Methods We collected and analyzed race/ethnicity, BMI, and geocoded address from electronic health records of 44,810 children 4 to 18 years-old seen at 14 Massachusetts pediatric practices in 2011–2012. Main outcomes were BMI z-score and BMI z-score change over time. We used multivariable linear regression to examine associations between race/ethnicity and BMI z-score outcomes, sequentially adjusting for neighborhood SES and the food and physical activity environment. Results Among 44,810 children, 13.3% were black, 5.7% Hispanic, and 65.2% white. Compared to white children, BMI z-scores were higher among black (0.43 units [95% CI: 0.40–0.45]) and Hispanic (0.38 [0.34–0.42]) children; black (0.06 [0.04–0.08]), but not Hispanic, children also had greater increases in BMI z-score over time. Adjusting for neighborhood SES substantially attenuated BMI z-score differences among black (0.30 [0.27–0.34]) and Hispanic children (0.28 [0.23–0.32]), while adjustment for food and physical activity environments attenuated the differences but to a lesser extent than neighborhood SES. Conclusions Neighborhood SES and the built environment may be important drivers of childhood obesity disparities. To accelerate progress in reducing obesity disparities, interventions must be tailored to the neighborhood contexts in which families live. PMID:27404577

Using Additive Manufacturing to Print a CubeSat Propulsion System

NASA Technical Reports Server (NTRS)

Marshall, William M.

2015-01-01

CubeSats are increasingly being utilized for missions traditionally ascribed to larger satellites CubeSat unit (1U) defined as 10 cm x 10 cm x 11 cm. Have been built up to 6U sizes. CubeSats are typically built up from commercially available off-the-shelf components, but have limited capabilities. By using additive manufacturing, mission specific capabilities (such as propulsion), can be built into a system. This effort is part of STMD Small Satellite program Printing the Complete CubeSat. Interest in propulsion concepts for CubeSats is rapidly gaining interest-Numerous concepts exist for CubeSat scale propulsion concepts. The focus of this effort is how to incorporate into structure using additive manufacturing. End-use of propulsion system dictates which type of system to develop-Pulse-mode RCS would require different system than a delta-V orbital maneuvering system. Team chose an RCS system based on available propulsion systems and feasibility of printing using a materials extrusion process. Initially investigated a cold-gas propulsion system for RCS applications-Materials extrusion process did not permit adequate sealing of part to make this a functional approach.

WHAT MAKES THINGS GO.

ERIC Educational Resources Information Center

Mobilization for Youth, Inc., New York, NY.

THE INITIAL QUESTION IN THE TITLE IS ANSWERED THROUGH SIMPLE EXPERIMENTS FOR CULTURALLY DISADVANTAGED CHILDREN IN ELEMENTARY SCHOOL. MUSCLES, RUNNING, WATER, WIND, STEAM, FAST BURNING AND ELECTRICITY ARE FOUND TO "MAKE THINGS GO." USING THESE BASIC DISCOVERIES, VOCABULARY IS BUILT UP BY WORKING WITH DIFFERENT WORDS RELATING TO THE…

Interpersonal Reactivity Index: Analysis of Invariance and Gender Differences in Spanish Youths

ERIC Educational Resources Information Center

Holgado Tello, Francisco Pablo; Delgado Egido, Begona; Carrasco Ortiz, Miguel A.; Del Barrio Gandara, M. V.

2013-01-01

Empathy is understood as a multidimensional construct involving both cognitive and emotional factors for which, traditionally, gender differences have been reported. The Interpersonal Reactivity Index (Davis in Catalog Sel Documents Psychol 10:1-19, 1980) is an instrument made up of four subscales, each measuring a different dimension of the…

Bi-Tapered Fiber Sensor Using a Supercontinuum Light Source for a Broad Spectral Range

NASA Astrophysics Data System (ADS)

Garcia Mina, Diego Felipe

We describe the fabrication bi-tapered optical fiber sensors designed for shorter wavelength operation and we study their optical properties. The new sensing system designed and built for the project is a specialty optical fiber that is single-mode in the visible/near infrared wavelength region of interest. In fabricating the tapered fiber we control the taper parameters, such as the down-taper and up-taper rate, shape and length, and the fiber waist diameter and length. The sensing is mode is via the electromagnetic field, which is evanescent outside the optical fiber and is confined close to the fiber's surface (within a couple hundred nanometers). The fiber sensor system has multiple advantages as a compact, simple device with an ability to detected tiny changes in the refractive index. We developed a supercontinuum light source to provide a wide spectral wavelength range from visible to near IR. The source design was based on coupling light from a femtosecond laser in a photonic crystal fiber designed for high nonlinearity. The output light was efficiently coupled into the bi-tapered fiber sensor and good signal to noise was achieved across the wavelength region. The bi-tapered fiber starts and ends with a single mode fiber in the waist region there are many modes with different propagation constants that couple to the environment outside the fiber. The signals have a strong periodic component as the wavelength is scanned; we exploit the periodicity in the signal using a discrete Fourier transform analysis to correlate signal phase changes with the refractive index changes in the local environment. For small index changes we also measure a strong correlation with the dominant Fourier amplitude component. Our experiments show that our phase-based signal processing technique works well at shorter wavelengths and we extract a new feature, the Fourier amplitude, to measure the refractive index difference. We conducted experiments using aqueous medium with controlled refractive index, such as water-glycerol mixtures. We find sensitivity to changes in the refractive index close to 0.00002 in so-called Refractive Index Units (RIUs). That is smaller than reported in recent literature, but by no means a limiting value. The technique is not limited to aqueous solutions surrounding the fiber, but it can also be adapted to study volatile organic compounds. Future improvements in the fiber sensing system are discussed, including adding thin films to the surface for label-free detection and to draw the electromagnetic field to the fiber's surface.

Development of a Climate Resilience Screening Index (CRSI): An Assessment of Resilience to Acute Meteorological Events and Selected Natural Hazards

EPA Science Inventory

We developed a conceptual model of climate resilience (CRSI – Climate Resilience Screening Index ) designed to be sensitive to changes in the natural environment, built environment, governance, and social structure and vulnerability or risk to climate events. CRSI has been used ...

[Physical fingerprint for quality control of traditional Chinese medicine extract powders].

PubMed

Zhang, Yi; Xu, Bing; Sun, Fei; Wang, Xin; Zhang, Na; Shi, Xin-Yuan; Qiao, Yan-Jiang

2016-06-01

The physical properties of both raw materials and excipients are closely correlated with the quality of traditional Chinese medicine preparations in oral solid dosage forms. In this paper, based on the concept of the chemical fingerprint for quality control of traditional Chinese medicine products, the method of physical fingerprint for quality evaluation of traditional Chinese medicine extract powders was proposed. This novel physical fingerprint was built by the radar map, and consisted of five primary indexes (i.e. stackablity, homogeneity, flowability, compressibility and stability) and 12 secondary indexes (i.e. bulk density, tap density, particle size<50 μm percentage, relative homogeneity index, hausner ratio, angle of repose, powder flow time, inter-particle porosity, Carr index, cohesion index, loss on drying, hygroscopicity). Panax notoginseng saponins (PNS) extract was taken for an example. This paper introduced the application of physical fingerprint in the evaluation of source-to-source and batch-to-batch quality consistence of PNS extract powders. Moreover, the physical fingerprint of PNS was built by calculating the index of parameters, the index of parametric profile and the index of good compressibility, in order to successfully predict the compressibility of the PNS extract powder and relevant formulations containing PNS extract powder and conventional pharmaceutical excipients. The results demonstrated that the proposed method could not only provide new insights into the development and process control of traditional Chinese medicine solid dosage forms. Copyright© by the Chinese Pharmaceutical Association.

Built-up Areas Extraction in High Resolution SAR Imagery based on the method of Multiple Feature Weighted Fusion

NASA Astrophysics Data System (ADS)

Liu, X.; Zhang, J. X.; Zhao, Z.; Ma, A. D.

2015-06-01

Synthetic aperture radar in the application of remote sensing technology is becoming more and more widely because of its all-time and all-weather operation, feature extraction research in high resolution SAR image has become a hot topic of concern. In particular, with the continuous improvement of airborne SAR image resolution, image texture information become more abundant. It's of great significance to classification and extraction. In this paper, a novel method for built-up areas extraction using both statistical and structural features is proposed according to the built-up texture features. First of all, statistical texture features and structural features are respectively extracted by classical method of gray level co-occurrence matrix and method of variogram function, and the direction information is considered in this process. Next, feature weights are calculated innovatively according to the Bhattacharyya distance. Then, all features are weighted fusion. At last, the fused image is classified with K-means classification method and the built-up areas are extracted after post classification process. The proposed method has been tested by domestic airborne P band polarization SAR images, at the same time, two groups of experiments based on the method of statistical texture and the method of structural texture were carried out respectively. On the basis of qualitative analysis, quantitative analysis based on the built-up area selected artificially is enforced, in the relatively simple experimentation area, detection rate is more than 90%, in the relatively complex experimentation area, detection rate is also higher than the other two methods. In the study-area, the results show that this method can effectively and accurately extract built-up areas in high resolution airborne SAR imagery.

Development of a phantom and a methodology for evaluation of depth kerma and kerma index for dental cone beam computed tomography.

PubMed

Batista, W O; Navarro, M V T; Maia, A F

2013-12-01

Basically, all modalities of diagnostic radiology require phantoms suitable for dosimetric evaluations. New technologies frequently arise unaccompanied of tools for dosimetric evaluations and quality control. In this study, a low-cost phantom and a consequent proposed methodology for dosimetric evaluations in cone beam computed tomography (CBCT) were presented. The developed phantom has typical dimensions of the human face, was built in polymethyl methacrylate and filled with water. Three devices with different technological concepts were evaluated and a proposed index, kerma index-height product (PKIH), was defined as an option to the use of air kerma-area product. The results of this study show relatively uniform kerma profiles for scanners with field of views (FOVs) of large diameters and non-uniform for FOVs of small diameters. With regard to the values obtained for the kerma indexes, much higher values were found for the equipment FOVs with small diameter compared with the values of the two other equipment that have larger diameters. The results indicate that (1) there is a need for special phantoms for use in CBCT, (2) the use of P(KA) in the evaluation of protocols on different equipment can lead to false interpretations and (3) the new index is a suitable alternative for the use of P(KA) in CBCT.

MEMS tunable optical filter based on multi-ring resonator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dessalegn, Hailu, E-mail: hailudessalegn@yahoo.com, E-mail: tsrinu@ece.iisc.ernet.in; Srinivas, T., E-mail: hailudessalegn@yahoo.com, E-mail: tsrinu@ece.iisc.ernet.in

We propose a novel MEMS tunable optical filter with a flat-top pass band based on multi-ring resonator in an electrostatically actuated microcantilever for communication application. The filter is basically structured on a microcantilever beam and built in optical integrated ring resonator which is placed in one end of the beam to gain maximum stress on the resonator. Thus, when a DC voltage is applied, the beam will bend, that induces a stress and strain in the ring, which brings a change in refractive index and perimeter of the rings leading to change in the output spectrum shift, providing the tenabilitymore » as high as 0.68nm/μN and it is capable of tuning up to 1.7nm.« less

Visible-Frequency Dielectric Metasurfaces for Multiwavelength Achromatic and Highly Dispersive Holograms.

PubMed

Wang, Bo; Dong, Fengliang; Li, Qi-Tong; Yang, Dong; Sun, Chengwei; Chen, Jianjun; Song, Zhiwei; Xu, Lihua; Chu, Weiguo; Xiao, Yun-Feng; Gong, Qihuang; Li, Yan

2016-08-10

Dielectric metasurfaces built up with nanostructures of high refractive index represent a powerful platform for highly efficient flat optical devices due to their easy-tuning electromagnetic scattering properties and relatively high transmission efficiencies. Here we show visible-frequency silicon metasurfaces formed by three kinds of nanoblocks multiplexed in a subwavelength unit to constitute a metamolecule, which are capable of wavefront manipulation for red, green, and blue light simultaneously. Full phase control is achieved for each wavelength by independently changing the in-plane orientations of the corresponding nanoblocks to induce the required geometric phases. Achromatic and highly dispersive meta-holograms are fabricated to demonstrate the wavefront manipulation with high resolution. This technique could be viable for various practical holographic applications and flat achromatic devices.

Changes Over Time in Absolute and Relative Socioeconomic Differences in Smoking: A Comparison of Cohort Studies From Britain, Finland, and Japan

PubMed Central

Pietiläinen, Olli; Ferrie, Jane; Kivimäki, Mika; Lahti, Jouni; Marmot, Michael; Rahkonen, Ossi; Sekine, Michikazu; Shipley, Martin; Tatsuse, Takashi; Lallukka, Tea

2016-01-01

Introduction: Socioeconomic differences in smoking over time and across national contexts are poorly understood. We assessed the magnitude of relative and absolute social class differences in smoking in cohorts from Britain, Finland, and Japan over 5–7 years. Methods: The British Whitehall II study (n = 4350), Finnish Helsinki Health Study (n = 6328), and Japanese Civil Servants Study (n = 1993) all included employed men and women aged 35–68 at baseline in 1997–2002. Follow-up was in 2003–2007 (mean follow-up 5.1, 6.5, and 3.6 years, respectively). Occupational social class (managers, professionals and clerical employees) was measured at baseline. Current smoking and covariates (age, marital status, body mass index, and self-rated health) were measured at baseline and follow-up. We assessed relative social class differences using the Relative Index of Inequality and absolute differences using the Slope Index of Inequality. Results: Social class differences in smoking were found in Britain and Finland, but not in Japan. Age-adjusted relative differences at baseline ranged from Relative Index of Inequality 3.08 (95% confidence interval 1.99–4.78) among Finnish men to 2.32 (1.24–4.32) among British women, with differences at follow-up greater by 8%–58%. Absolute differences remained stable and varied from Slope Index of Inequality 0.27 (0.15–0.40) among Finnish men to 0.10 (0.03–0.16) among British women. Further adjustment for covariates had modest effects on inequality indices. Conclusions: Large social class differences in smoking persisted among British and Finnish men and women, with widening tendencies in relative differences over time. No differences could be confirmed among Japanese men or women. Implications: Changes over time in social class differences in smoking are poorly understood across countries. Our study focused on employees from Britain, Finland and Japan, and found relative and absolute and class differences among British and Finnish men and women. Key covariates had modest effects on the differences. Relative differences tended to widen over the 4- to 7-year follow-up, whereas absolute differences remained stable. In contrast, class differences in smoking among Japanese men or women were not found. Britain and Finland are at the late stage of the smoking epidemic model, whereas Japan may not follow the same model. PMID:26764256

Comparison of Measured and Calculated Stresses in Built-up Beams

NASA Technical Reports Server (NTRS)

Levin, L Ross; Nelson, David H

1946-01-01

Web stresses and flange stresses were measured in three built-up beams: one of constant depth with flanges of constant cross-section, one linearly tapered in depth with flanges of constant cross section, and one linearly tapered in depth with tapered flanges. The measured stresses were compared with the calculated stresses obtained by the methods outlined in order to determine the degree of accuracy that may be expected from the stress analysis formulas. These comparisons indicated that the average measured stresses for all points in the central section of the beams did not exceed the average calculated stresses by more than 5 percent. It also indicated that the difference between average measured flange stresses and average calculated flange stresses on the net area and a fully effective web did not exceed 6.1 percent.

Investigation of current transfer in built-up superconductors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, J.R.; Dresner, L.; Lue, J.W.

1977-01-01

Superconductors carrying 10 kA or more have been widely suggested for use in fusion research and reactor magnets. Built-up or cable conductors have been proposed in which superconductor is concentrated in part of the conductor or part of the strands while the stabilizer occupies the rest. This scheme leads to substantial saving in manufacturing cost and to reduction of ac losses. Simplified analysis indicates that the current transfer from superconducting wire to normal wire takes place over a characteristic length depending on the resistivity of the contact barrier, the resistivity of the stabilizer, and the geometry of the conductor. Furthermore,more » the cold-end recovery suffers a reduction. Two types of conductors were constructed for the experimental test. Triplex conductors consisting of either three superconducting wires or two superconducting plus one copper wire were used to simulate cables. Laminated superconductor and copper strips with different soldering bonds were used for build-ups. Normal zone propagation and recovery experiments have been performed and results are compared with the theory.« less

Evaluation and Ranking of Researchers – Bh Index

PubMed Central

Bharathi, D. Gnana

2013-01-01

Evaluation and ranking of every author is very crucial as it is widely used to evaluate the performance of the researcher. This article proposes a new method, called Bh-Index, to evaluate the researchers based on the publications and citations. The method is built on h-Index and only the h-core articles are taken into consideration. The method assigns value additions to those articles that receive significantly high citations in comparison to the h-Index of the researcher. It provides a wide range of values for a given h-Index and effective evaluation even for a short period. Use of Bh-Index along with the h-Index gives a powerful tool to evaluate the researchers. PMID:24349183

National registry of patients with systemic lupus erythematosus of the Spanish Society of Rheumatology: objectives and methodology.

PubMed

Rúa-Figueroa, Iñigo; López-Longo, Francisco Javier; Calvo-Alén, Jaime; Galindo-Izquierdo, María; Loza, Estíbaliz; García de Yebenes, M Jesús; Pego-Reigosa, José M

2014-01-01

To describe the objectives, design and methods of the Spanish Society of Rheumatology systemic lupus erythematosus (SLE) registry (RELESSER). Multicenter, hospital-based registry, with retrospective collection of data from a large representative sample of adult patients with SLE (1997 ACR criteria) attending Spanish rheumatology services. The registry includes demographic data, frequent and infrequent (<1%) clinical manifestations, information about activity, damage, severity, comorbidity, treatments and mortality, collecting 359 variables per patient, with highly standardized definitions. We performed a preliminary descriptive analysis of the data. Forty-five centers were involved and 4,024 SLE patients (91% with ≥ 4 ACR criteria) have been included; 90% are women and 93% caucasians, with a median age at diagnosis of 33 years, median disease duration: 120 months, median follow-up duration: 104 months; 3,222 (81%) of the patients are in active follow-up and 591 (14%) were lost to follow-up. The median values of the SELENA-SLEDAI score, SLICC/ACR damage index and Katz severity index have been 2, 1 and 2, respectively. A total of 211 patients (6%) died. RELESSER represents the largest European SLE registry built to date, providing comprehensive and reliable information on SLE manifestations, disease status, comorbid conditions and treatments in daily clinical practice. RELESSER is constituted as a tool of great potential for multicenter clinical research in SLE. Copyright © 2013 Elsevier España, S.L. All rights reserved.

Smart Location Mapping

EPA Pesticide Factsheets

The Smart Location Database, Access to Jobs and Workers via Transit, and National Walkability Index tools can help assess indicators related to the built environment, transit accessibility, and walkability.

muBLASTP: database-indexed protein sequence search on multicore CPUs.

PubMed

Zhang, Jing; Misra, Sanchit; Wang, Hao; Feng, Wu-Chun

2016-11-04

The Basic Local Alignment Search Tool (BLAST) is a fundamental program in the life sciences that searches databases for sequences that are most similar to a query sequence. Currently, the BLAST algorithm utilizes a query-indexed approach. Although many approaches suggest that sequence search with a database index can achieve much higher throughput (e.g., BLAT, SSAHA, and CAFE), they cannot deliver the same level of sensitivity as the query-indexed BLAST, i.e., NCBI BLAST, or they can only support nucleotide sequence search, e.g., MegaBLAST. Due to different challenges and characteristics between query indexing and database indexing, the existing techniques for query-indexed search cannot be used into database indexed search. muBLASTP, a novel database-indexed BLAST for protein sequence search, delivers identical hits returned to NCBI BLAST. On Intel Haswell multicore CPUs, for a single query, the single-threaded muBLASTP achieves up to a 4.41-fold speedup for alignment stages, and up to a 1.75-fold end-to-end speedup over single-threaded NCBI BLAST. For a batch of queries, the multithreaded muBLASTP achieves up to a 5.7-fold speedups for alignment stages, and up to a 4.56-fold end-to-end speedup over multithreaded NCBI BLAST. With a newly designed index structure for protein database and associated optimizations in BLASTP algorithm, we re-factored BLASTP algorithm for modern multicore processors that achieves much higher throughput with acceptable memory footprint for the database index.

Direct Medical Costs Attributable to Cancer-Associated Venous Thromboembolism: A Population-Based Longitudinal Study.

PubMed

Cohoon, Kevin P; Ransom, Jeanine E; Leibson, Cynthia L; Ashrani, Aneel A; Petterson, Tanya M; Long, Kirsten Hall; Bailey, Kent R; Heit, John A

2016-09-01

The purpose of this study is to estimate medical costs attributable to venous thromboembolism among patients with active cancer. In a population-based cohort study, we used Rochester Epidemiology Project (REP) resources to identify all Olmsted County, Minn. residents with incident venous thromboembolism and active cancer over the 18-year period, 1988-2005 (n = 374). One Olmsted County resident with active cancer without venous thromboembolism was matched to each case on age, sex, cancer diagnosis date, and duration of prior medical history. Subjects were followed forward in REP provider-linked billing data for standardized, inflation-adjusted direct medical costs from 1 year prior to index (venous thromboembolism event date or control-matched date) to the earliest of death, emigration from Olmsted County, or December 31, 2011, with censoring on the shortest follow-up to ensure a similar follow-up duration for each case-control pair. We used generalized linear modeling to predict costs for cases and controls and bootstrapping methods to assess uncertainty and significance of mean adjusted cost differences. Outpatient drug costs were not included in our estimates. Adjusted mean predicted costs were 1.9-fold higher for cases ($49,351) than for controls ($26,529) (P < .001) from index to up to 5 years post index. Cost differences between cases and controls were greatest within the first 3 months (mean difference = $13,504) and remained significantly higher from 3 months to 5 years post index (mean difference = $12,939). Venous thromboembolism-attributable costs among patients with active cancer contribute a substantial economic burden and are highest from index to 3 months, but may persist for up to 5 years. Copyright © 2016 Elsevier Inc. All rights reserved.

Methods for slow axis beam quality improvement of high power broad area diode lasers

NASA Astrophysics Data System (ADS)

An, Haiyan; Xiong, Yihan; Jiang, Ching-Long J.; Schmidt, Berthold; Treusch, Georg

2014-03-01

For high brightness direct diode laser systems, it is of fundamental importance to improve the slow axis beam quality of the incorporated laser diodes regardless what beam combining technology is applied. To further advance our products in terms of increased brightness at a high power level, we must optimize the slow axis beam quality despite the far field blooming at high current levels. The later is caused predominantly by the built-in index step in combination with the thermal lens effect. Most of the methods for beam quality improvements reported in publications sacrifice the device efficiency and reliable output power. In order to improve the beam quality as well as maintain the efficiency and reliable output power, we investigated methods of influencing local heat generation to reduce the thermal gradient across the slow axis direction, optimizing the built-in index step and discriminating high order modes. Based on our findings, we have combined different methods in our new device design. Subsequently, the beam parameter product (BPP) of a 10% fill factor bar has improved by approximately 30% at 7 W/emitter without efficiency penalty. This technology has enabled fiber coupled high brightness multi-kilowatt direct diode laser systems. In this paper, we will elaborate on the methods used as well as the results achieved.

Investigation of index finger triggering force using a cadaver experiment: Effects of trigger grip span, contact location, and internal tendon force.

PubMed

Chang, Joonho; Freivalds, Andris; Sharkey, Neil A; Kong, Yong-Ku; Mike Kim, H; Sung, Kiseok; Kim, Dae-Min; Jung, Kihyo

2017-11-01

A cadaver study was conducted to investigate the effects of triggering conditions (trigger grip span, contact location, and internal tendon force) on index finger triggering force and the force efficiency of involved tendons. Eight right human cadaveric hands were employed, and a motion simulator was built to secure and control the specimens. Index finger triggering forces were investigated as a function of different internal tendon forces (flexor digitorum profundus + flexor digitorum superficialis = 40, 70, and 100 N), trigger grip spans (40, 50, and 60 mm), and contact locations between the index finger and a trigger. Triggering forces significantly increased when internal tendon forces increased from 40 to 100 N. Also, trigger grip spans and contact locations had significant effects on triggering forces; maximum triggering forces were found at a 50 mm span and the most proximal contact location. The results revealed that only 10-30% of internal tendon forces were converted to their external triggering forces. Copyright © 2017 Elsevier Ltd. All rights reserved.

Built-in-polarization field effect on lattice thermal conductivity of AlxGa1-xN/GaN heterostructure

NASA Astrophysics Data System (ADS)

Pansari, Anju; Gedam, Vikas; Kumar Sahoo, Bijaya

2015-12-01

The built-in-polarization field at the interface of AlxGa1-xN/GaN heterostructure enhances elastic constant, phonon velocity, Debye temperature and their bowing constants of barrier material AlxGa1-xN. The combined phonon relaxation time of acoustics phonons has been computed for with and without built-in-polarization field at room temperature for different aluminum (Al) content (x). Our result shows that the built-in-polarization field suppresses the scattering mechanisms and enhances the combined relaxation time. The thermal conductivity of AlxGa1-xN has been estimated as a function of temperature for x=0, 0.1, 0.5 and 1 for with and without polarization field. Minimum thermal conductivity has been observed for x=0.1 and 0.5. Analysis shows that up to a certain temperature (different for different x) the polarization field acts as negative effect and reduces the thermal conductivity and after this temperature thermal conductivity is significantly contributed by polarization field. This signifies pyroelectric character of AlxGa1-xN. The pyroelectric transition temperature of AlxGa1-xN alloy has been predicted for different x. Our study reports that room temperature thermal conductivity of AlxGa1-xN/GaN heterostructure is enhanced by built-in-polarization field. The temperature dependence of thermal conductivity for x=0.1 and 0.5 are in line with prior experimental studies. The method we have developed can be used for the simulation of heat transport in nitride devices to minimize the self heating processes and in polarization engineering strategies to optimize the thermoelectric performance of AlxGa1-xN/GaN heterostructures.

The effect of different trap height on the diversity of sap beetle (Coleoptera: Nitidulidae)

NASA Astrophysics Data System (ADS)

Rahim, Nor Atikah Abdul; Yaakop, Salmah

2018-04-01

This paper aim to measure the diversity and abundance of sap beetles in oil palm plantation in Malaysia on different heights, 1.5m and 2.5m above ground. A total 0f 20 baited traps were set up in Felda Lui Muda, Negeri Sembilan and located along three transects. The sap beetles collected weekly for a month and identified until species level and the diversity indexes were measured using Evenness Index (E), Shannon-Wiener Index (H'), Simpson's Index (D') and Margalef's Index (R'). All the diversity indexes indicated that the diversity on the lower height above the ground is higher than the upper height The result also shows that there are significant difference (p<0.05) when tested with t-test between the numbers of individuals on the different trap height although the number of species shows different results.

Residential greenness and birth outcomes: evaluating the influence of spatially correlated built-environment factors.

PubMed

Hystad, Perry; Davies, Hugh W; Frank, Lawrence; Van Loon, Josh; Gehring, Ulrike; Tamburic, Lillian; Brauer, Michael

2014-10-01

Half the world's population lives in urban areas. It is therefore important to identify characteristics of the built environment that are beneficial to human health. Urban greenness has been associated with improvements in a diverse range of health conditions, including birth outcomes; however, few studies have attempted to distinguish potential effects of greenness from those of other spatially correlated exposures related to the built environment. We aimed to investigate associations between residential greenness and birth outcomes and evaluate the influence of spatially correlated built environment factors on these associations. We examined associations between residential greenness [measured using satellite-derived Normalized Difference Vegetation Index (NDVI) within 100 m of study participants' homes] and birth outcomes in a cohort of 64,705 singleton births (from 1999-2002) in Vancouver, British Columbia, Canada. We also evaluated associations after adjusting for spatially correlated built environmental factors that may influence birth outcomes, including exposure to air pollution and noise, neighborhood walkability, and distance to the nearest park. An interquartile increase in greenness (0.1 in residential NDVI) was associated with higher term birth weight (20.6 g; 95% CI: 16.5, 24.7) and decreases in the likelihood of small for gestational age, very preterm (< 30 weeks), and moderately preterm (30-36 weeks) birth. Associations were robust to adjustment for air pollution and noise exposures, neighborhood walkability, and park proximity. Increased residential greenness was associated with beneficial birth outcomes in this population-based cohort. These associations did not change after adjusting for other spatially correlated built environment factors, suggesting that alternative pathways (e.g., psychosocial and psychological mechanisms) may underlie associations between residential greenness and birth outcomes.

Geospatial analysis of spaceborne remote sensing data for assessing disaster impacts and modeling surface runoff in the built-environment

NASA Astrophysics Data System (ADS)

Wodajo, Bikila Teklu

Every year, coastal disasters such as hurricanes and floods claim hundreds of lives and severely damage homes, businesses, and lifeline infrastructure. This research was motivated by the 2005 Hurricane Katrina disaster, which devastated the Mississippi and Louisiana Gulf Coast. The primary objective was to develop a geospatial decision-support system for extracting built-up surfaces and estimating disaster impacts using spaceborne remote sensing satellite imagery. Pre-Katrina 1-m Ikonos imagery of a 5km x 10km area of Gulfport, Mississippi, was used as source data to develop the built-up area and natural surfaces or BANS classification methodology. Autocorrelation of 0.6 or higher values related to spectral reflectance values of groundtruth pixels were used to select spectral bands and establish the BANS decision criteria of unique ranges of reflectance values. Surface classification results using GeoMedia Pro geospatial analysis for Gulfport sample areas, based on BANS criteria and manually drawn polygons, were within +/-7% of the groundtruth. The difference between the BANS results and the groundtruth was statistically not significant. BANS is a significant improvement over other supervised classification methods, which showed only 50% correctly classified pixels. The storm debris and erosion estimation or SDE methodology was developed from analysis of pre- and post-Katrina surface classification results of Gulfport samples. The SDE severity level criteria considered hurricane and flood damages and vulnerability of inhabited built-environment. A linear regression model, with +0.93 Pearson R-value, was developed for predicting SDE as a function of pre-disaster percent built-up area. SDE predictions for Gulfport sample areas, used for validation, were within +/-4% of calculated values. The damage cost model considered maintenance, rehabilitation and reconstruction costs related to infrastructure damage and community impacts of Hurricane Katrina. The developed models were implemented for a study area along I-10 considering the predominantly flood-induced damages in New Orleans. The BANS methodology was calibrated for 0.6-m QuickBird2 multispectral imagery of Karachi Port area in Pakistan. The results were accurate within +/-6% of the groundtruth. Due to its computational simplicity, the unit hydrograph method is recommended for geospatial visualization of surface runoff in the built-environment using BANS surface classification maps and elevations data. Key words. geospatial analysis, satellite imagery, built-environment, hurricane, disaster impacts, runoff.

Built-up Al-Li structures for cryogenic tank and dry bay applications

NASA Technical Reports Server (NTRS)

Lisagor, W. Barry

1993-01-01

The objectives are: (1) to demonstrate the cost benefits of built-up cryotank and dry bay structures; (2) to study of benefits of using Al alloys; (3) to study of benefit of using Al-Li alloys; (4) to evaluate alternative low-cost stiffener and joining concepts.

Precise and absolute measurements of complex third-order optical susceptibility

NASA Astrophysics Data System (ADS)

Santran, Stephane; Canioni, Lionel; Cardinal, Thierry; Fargin, Evelyne; Le Flem, Gilles; Rouyer, Claude; Sarger, Laurent

2000-11-01

We present precise and absolute measurements of full complex third order optical susceptibility on different fused silica and original glasses composed of tellurium, titanium, niobium erbium. These materials are designed to be the key point for applications ranging form high power laser systems to optoelectronics, their nonlinear index of refraction is a major property and thus must be accurately known. Due to the accuracy and sensitivity of our technique, we have been able to find a large dispersion (more than 30%) of the non linear index of fused silica glasses as a function of their processing mode. On the other hand, measurements on tellurium glasses have shown very strong nonlinearities (40 times higher than fused silica), to be linked to the configurations of their cations and anions. Although the titanium and niobium glasses are less nonlinear, they can be promising matrices for addition of luminescent entities like erbium leading to very interesting laser amplification materials. The experimental set-up is a collinear pump-probe (orthogonally polarized) experiment using transient absorption technique. It is built with around a 100 femtosecond laser oscillator. A fast oscillating delay between the pump and the probe allows us to measure the electronic nonlinearity in quasi real-time. This experiment has the following specifications: an absolute measurement accuracy below 10% mainly due to the laser parameters characterization, a relative measurement accuracy of 1% and a resolution less than 5.10-24m2/V2(50 times less than fused silica).

The flare-up index: a quantitative method to describe the phenomenon.

PubMed

Rimmer, A

1993-05-01

Acute exacerbation of symptoms during the inter-appointment time interval of endodontic treatment is a well-known complication. The phenomenon is termed "flare-up" by most researchers and clinicians, although the exact definition of it differs from one author to another, making it difficult to compare the results of the studies. The suggested flare-up index may be the way to build a common language that will enable the dental community to measure and study more of this phenomenon.

Rapid spectral and flux time variations in a solar burst observed at various dm-mm wavelengths and at hard X-rays

NASA Technical Reports Server (NTRS)

Zodivaz, A. M.; Kaufmann, P.; Correia, E.; Costa, J. E. R.; Takakura, T.; Cliver, E. W.; Tapping, K. F.

1986-01-01

A solar burst was observed with high sensitivity and time resolution at cm-mm wavelengths by two different radio observatories (Itapetinga and Algonquin), with high spectral time resolution at dm-mm wavelengths by patrol instruments (Sagamore Hill), and at hard X-rays (HXM Hinotori). At the onset of the major burst time structure there was a rapid rise in the spectral turnover frequency (from 5 to 15 GHz), in about 10s, coincident to a reduction of the spectral index in the optically thin part of the spectrum. The burst maxima were not time coincident at the optically thin radio frequencies and at the different hard X-ray energy ranges. The profiles at higher radio frequencies exhibited better time coincidence to the high energy X-rays. The hardest X-ray spectrum (-3) coincided with peak radio emission at the higher frequency (44 GHz). The event appeared to be built up by a first major injection of softer particles followed by other injections of harder particles. Ultrafast time structures were identified as superimposed on the burst emission at the cm-mm high sensitivity data at X-rays, with predominant repetition rates ranging from 2.0 to 3.5 Hz.

Texting atopic dermatitis patients to optimize learning and eczema area and severity index scores: A pilot randomized control trial.

PubMed

Singer, Hannah M; Levin, Laura E; Morel, Kimberly D; Garzon, Maria C; Stockwell, Melissa S; Lauren, Christine T

2018-05-02

Atopic dermatitis is a common, chronic, debilitating disease. Poor adherence to treatment is the most important preventable contributor to adverse outcomes. Thus, improving adherence can improve patient outcomes. Text message reminders with embedded condition-specific information have been shown to improve pediatric immunization adherence but have not been assessed in atopic dermatitis. The objective was to assess the effect of daily text messages on Eczema Area Severity Index scores and caregiver knowledge of atopic dermatitis. In this pilot randomized controlled trial, caregivers of children with atopic dermatitis enrolled during their initial appointment with a pediatric dermatologist and randomized 1:1 to standard care or daily text messages with patient education material and treatment reminders. Participants completed a multiple-choice atopic dermatitis knowledge quiz at initial and follow-up visits, and Eczema Area Severity Index scores were assessed. Forty-two patients enrolled, and 30 completed the study: 16 standard care group, 14 text message group. There was no significant difference in Eczema Area Severity Index score between the standard care and text message groups at follow-up, with mean decreases in Eczema Area Severity Index score of 53% and 58%, respectively. Mean score on follow-up atopic dermatitis knowledge quiz was significantly higher in the text message group (84% correct) than in the standard care group (75% correct) (P = .04). This pilot study did not demonstrate a difference in Eczema Area Severity Index scores with text message reminders. The significantly higher follow-up atopic dermatitis quiz score in the text message group indicates that participants read and retained information from text messages. Limitations include small sample size and short duration of follow-up. © 2018 Wiley Periodicals, Inc.

[Canopy vertical structure and understory plant regeneration of an evergreen broadleaved forest in Damingshan, Guangxi, China.

PubMed

Zhou, Xiao Guo; Wen, Yuan Guang; Zhu, Hong Guang; Wang, Lei; Li, Xiao Qiong

2017-02-01

In order to reveal the dynamics of canopy vertical structure and its effects on understory regeneration, we built 24 permanent plots (20 m×20 m) on the upslope, midslopeand downslope, respectively, in a typical evergreen broadleaved forest in Damingshan, Guangxi, China. We measured the crown area of each tree with diameter at breast height (DBH)≥1.0 cm, and surveyed the understory regeneration in growing season from 2009 to 2011. The results showed that the total canopy cover significantly increased from 54.0% in 2009 to 67.4% in 2011 after the frozen disaster in 2008. A significant difference existed in the cover and increment of different canopy layers. The canopy cover in the upper layers was markedly higher than that in the middle and lower layers. The increment of canopy coverage in the middle and lower layers was significantly higher than that in the upper layer. There were 55 regenerated woody plant species, and the dominant families and species of regenerated plants were in accord with those in the evergreen broadleaved forest. Biodiversity index of regenerated plants in the same slope position was significantly different among different years, and no significant difference was observed among different slope positions in the same year. The correlation between the coverage at different canopy layers and the species richness and abundance of regenerated plants was not significant. Total canopy cover and canopy coverage at the middle and lower layers were significantly negatively correlated with the Shannon index, Simpson index, and Pielou evenness index of the understory regenerated plants. It indicated that canopy coverage had a significant influence on the regeneration of understory, and the middle and lower layers had a stronger influence on the biodiversity of regenerated plants.

Predicting Intra-Urban Population Densities in Africa using SAR and Optical Remote Sensing Data

NASA Astrophysics Data System (ADS)

Linard, C.; Steele, J.; Forget, Y.; Lopez, J.; Shimoni, M.

2017-12-01

The population of Africa is predicted to double over the next 40 years, driving profound social, environmental and epidemiological changes within rapidly growing cities. Estimations of within-city variations in population density must be improved in order to take urban heterogeneities into account and better help urban research and decision making, especially for vulnerability and health assessments. Satellite remote sensing offers an effective solution for mapping settlements and monitoring urbanization at different spatial and temporal scales. In Africa, the urban landscape is covered by slums and small houses, where the heterogeneity is high and where the man-made materials are natural. Innovative methods that combine optical and SAR data are therefore necessary for improving settlement mapping and population density predictions. An automatic method was developed to estimate built-up densities using recent and archived optical and SAR data and a multi-temporal database of built-up densities was produced for 48 African cities. Geo-statistical methods were then used to study the relationships between census-derived population densities and satellite-derived built-up attributes. Best predictors were combined in a Random Forest framework in order to predict intra-urban variations in population density in any large African city. Models show significant improvement of our spatial understanding of urbanization and urban population distribution in Africa in comparison to the state of the art.

Population-Adjusted Street Connectivity, Urbanicity and Risk of Obesity in the U.S

PubMed Central

Wang, Fahui; Wen, Ming; Xu, Yanqing

2013-01-01

Street connectivity, defined as the number of (3-way or more) intersections per area unit, is an important index of built environments as a proxy for walkability in a neighborhood. This paper examines its geographic variations across the rural-urban continuum (urbanicity), major racial-ethnic groups and various poverty levels. The population-adjusted street connectivity index is proposed as a better measure than the regular index for a large area such as county due to likely concentration of population in limited space within the large area. Based on the data from the Behavioral Risk Factor Surveillance System (BRFSS), this paper uses multilevel modeling to analyze its association with physical activity and obesity while controlling for various individual and county-level variables. Analysis of data subsets indicates that the influences of individual and county-level variables on obesity risk vary across areas of different urbanization levels. The positive influence of street connectivity on obesity control is limited to the more but not the mostly urbanized areas. This demonstrates the value of obesogenic environment research in different geographic settings, helps us reconcile and synthesize some seemingly contradictory results reported in different studies, and also promotes that effective policies need to be highly sensitive to the diversity of demographic groups and geographically adaptable. PMID:23667278

Specifying, Installing and Maintaining Built-Up and Modified Bitumen Roofing Systems.

ERIC Educational Resources Information Center

Hobson, Joseph W.

2000-01-01

Examines built-up, modified bitumen, and hybrid combinations of the two roofing systems and offers advise on how to assure high- quality performance and durability when using them. Included is a glossary of commercial roofing terms and asphalt roofing resources to aid in making decisions on roofing and systems product selection. (GR)

Influence of various alternative bedding materials on pododermatitis in broilers raised in a built-up litter system

USDA-ARS?s Scientific Manuscript database

Broilers in the United States are frequently raised on built-up litter systems, primarily bedded with pine wood chips (shavings) or sawdust. There is continuing interest in alternative bedding materials as pine products are often in short supply and prices rise accordingly. Alternative bedding mat...

An Analysis of the Advantages and Disadvantages of the Air Force Standard Control Panel

DTIC Science & Technology

1989-09-01

comparativ - process. The built-up system required approximately 100 hours to design , install and calibrate. The reader is reminded that the built-up...Summary......................................... 9 Outline of Research Design .................... 9 Ii. Literature Review...133 Question 3 .......................... 133 Area 3: Design Phase ................... 134 Question 4 .......................... 134 Area 4

Helicopter support of North Sea oil exploration.

PubMed

Preston, F S

1978-04-01

Exploration for oil beneath the North Sea started in the early 1960's with the discovery of natural gas and oil in the southern part between the coasts of East Anglia and the Netherlands. Since then oil exploration has built up considerably, the main effort moving northwards between the Shetland Islands and the Norwegian coasts. The helicopter offered the most direct and rapid contact with off-shore oil rigs and since these early days and immense helicopter operation has been built up round the borders of the North Sea by all the nations involved. Flying conditions in this area, particularly in winter, are at times difficult if not to say hazardous. Nevertheless, a sophisticated helicopter support service has been built up using modern aircraft and equipment which is unique in aviation history. This paper attempts to trace the history of the service, the operational problems involved and the special needs such as survival equipment and clothing. In addition, a co-ordinated air/sea rescue service largely based on helicopters has been built up and provides not only rescue facilities for possible rig disasters but also for shipping emergencies in the area.

Assessing the impact of urbanization on urban climate by remote satellite perspective: a case study in Danang city, Vietnam

NASA Astrophysics Data System (ADS)

Hoang Khanh Linh, N.; Van Chuong, H.

2015-04-01

Urban climate, one of the challenges of human being in 21 century, is known as the results of land use/cover transformation. Its characteristics are distinguished by different varieties of climatic conditions in comparison with those of less built-up areas. The alterations lead to "Urban Heat Island", in which temperature in urban places is higher than surrounding environment. This happens not only in mega cities but also in less urbanized sites. The results determine the change of land use/cover and land surface temperature in Danang city by using multi-temporal Landsat and ASTER data for the period of 1990-2009. Based on the supervised classification method of maximum likelihood algorithm, satellite images in 1990, 2003, 2009 were classified into five classes: water, forest, shrub, agriculture, barren land and built-up area. For accuracy assessment, the error metric tabulations of mapped classes and reference classes were made. The Kappa statistics, derived from error matrices, were over 80% for all of land use maps. An comparison change detection algorithm was made in three intervals, 1990-2003, 2003-2009 and 1990-2009. The results showed that built-up area increased from 8.95% to 17.87% between 1990 and 2009, while agriculture, shrub and barren decreased from 12.98% to 7.53%, 15.72% to 9.89% and 3.88% to 1.77% due to urbanization that resulted from increasing of urban population and economic development, respectively. Land surface temperature (LST) maps were retrieved from thermal infrared bands of Landsat and ASTER data. The result indicated that the temperature in study area increased from 39oC to 41oC for the period of 1990-2009. Our analysis showed that built-up area had the highest LST values, whereas water bodies had the least LST. This study is expected to be useful for decision makers to make an appropriate land use planning which can mitigate the effect to urban climate.

Measuring Land Change in Coastal Zone around a Rapidly Urbanized Bay.

PubMed

Huang, Faming; Huang, Boqiang; Huang, Jinliang; Li, Shenghui

2018-05-23

Urban development is a major cause for eco-degradation in many coastal regions. Understanding urbanization dynamics and underlying driving factors is crucial for urban planning and management. Land-use dynamic degree indices and intensity analysis were used to measure land changes occurred in 1990, 2002, 2009, and 2017 in the coastal zone around Quanzhou bay, which is a rapidly urbanized bay in Southeast China. The comprehensive land-use dynamic degree and interval level intensity analysis both revealed that land change was accelerating across the three time intervals in a three-kilometer-wide zone along the coastal line (zone A), while land change was fastest during the second time interval 2002⁻2009 in a separate terrestrial area within coastal zone (zone B). Driven by urbanization, built-up gains and cropland losses were active for all time intervals in both zones. Mudflat losses were active except in the first time interval in zone A due to the intensive sea reclamation. The gain of mangrove was active while the loss of mangrove is dormant for all three intervals in zone A. Transition level analysis further revealed the similarities and differences in processes within patterns of land changes for both zones. The transition from cropland to built-up was systematically targeted and stationary while the transition from woodland to built-up was systematically avoiding transition in both zones. Built-up tended to target aquaculture for the second and third time intervals in zone A but avoid Aquaculture for all intervals in zone B. Land change in zone A was more significant than that in zone B during the second and third time intervals at three-level intensity. The application of intensity analysis can enhance our understanding of the patterns and processes in land changes and suitable land development plans in the Quanzhou bay area. This type of investigation is useful to provide information for developing sound land use policy to achieve urban sustainability in similar coastal areas.

Evaluating the compatibility of multi-functional and intensive urban land uses

NASA Astrophysics Data System (ADS)

Taleai, M.; Sharifi, A.; Sliuzas, R.; Mesgari, M.

2007-12-01

This research is aimed at developing a model for assessing land use compatibility in densely built-up urban areas. In this process, a new model was developed through the combination of a suite of existing methods and tools: geographical information system, Delphi methods and spatial decision support tools: namely multi-criteria evaluation analysis, analytical hierarchy process and ordered weighted average method. The developed model has the potential to calculate land use compatibility in both horizontal and vertical directions. Furthermore, the compatibility between the use of each floor in a building and its neighboring land uses can be evaluated. The method was tested in a built-up urban area located in Tehran, the capital city of Iran. The results show that the model is robust in clarifying different levels of physical compatibility between neighboring land uses. This paper describes the various steps and processes of developing the proposed land use compatibility evaluation model (CEM).

Impact of the China Healthy Cities Initiative on Urban Environment.

PubMed

Yue, Dahai; Ruan, Shiman; Xu, Jin; Zhu, Weiming; Zhang, Luyu; Cheng, Gang; Meng, Qingyue

2017-04-01

The China Healthy Cities initiative, a nationwide public health campaign, has been implemented for 25 years. As "Healthy China 2030" becomes the key national strategy for improving population health, this initiative is an important component. However, the effects of the initiative have not been well studied. This paper aims to explore its impact on urban environment using a multiple time series design. We adopted a stratified and systematic sampling method to choose 15 China healthy cities across the country. For the selected healthy cities, 1:1 matched non-healthy cities were selected as the comparison group. We collected longitudinal data from 5 years before cities achieved the healthy city title up to 2012. We used hierarchical models to calculate difference-in-differences estimates for examining the impact of the initiative. We found that the China Healthy Cities initiative was associated with increases in the proportion of urban domestic sewage treated (32 percentage points), the proportion of urban domestic garbage treated (30 percentage points), and the proportion of qualified farmers' markets (40 percentage points), all of which are statistically significant (P < 0.05). No significant change was found for increases in green coverage of urban built-up area (5 percentage points), green space per capita (2 square meter), and days with Air Quality Index/Air Pollution Index ≤ 100 (25 days). In conclusion, the China Healthy Cities initiative was associated with significant improved urban environment in terms of infrastructure construction, yet had little impact on green space and air quality.

Personal, neighbourhood and urban factors associated with obesity in the United States.

PubMed

Joshu, C E; Boehmer, T K; Brownson, R C; Ewing, R

2008-03-01

Growing evidence suggests the built environment impacts obesity within urban areas; however, little research has investigated these relationships across levels of urbanisation in diverse and representative populations. This study aimed to determine whether personal and neighbourhood barriers differ by the level of urbanisation and the relative importance of personal barriers, neighbourhood barriers and land-use development patterns measured by a county-level sprawl index. Population-based, cross-sectional telephone survey data were collected on 1818 United States adults of diverse ethnicity and income level. Primary analyses were stratified by the level of urbanisation at the county level (large metropolitan, small metropolitan, non-metro, rural). Associations between obesity and neighbourhood and personal barriers were estimated with logistic regression, controlling for demographic variables. Within metropolitan areas, the association between body mass index (BMI) and county-level sprawl was estimated using hierarchical linear modelling, controlling for individual-level neighbourhood and personal barriers and demographic variables and then assessing cross-level interaction. The prevalence of neighbourhood, but not personal, barriers differed widely across levels of urbanisation. Specific neighbourhood (eg traffic, unattended dogs) and personal (eg time, injury) barriers differentially correlated with obesity across strata. The impact of sprawl on BMI (B = -0.005) was consistent with previous findings; standardised coefficients indicate that personal (beta = 0.10) and neighbourhood (beta = 0.05) barriers had a stronger association than sprawl (beta = -0.02). Furthermore, the effect of sprawl on BMI increased by -0.006 with each additional personal barrier. Future intervention planning and policy development should consider that personal barriers and built environment characteristics may interact with each other and influence obesity differently across urbanisation levels.

Residential Greenness and Birth Outcomes: Evaluating the Influence of Spatially Correlated Built-Environment Factors

PubMed Central

Davies, Hugh W.; Frank, Lawrence; Van Loon, Josh; Gehring, Ulrike; Tamburic, Lillian; Brauer, Michael

2014-01-01

Background: Half the world’s population lives in urban areas. It is therefore important to identify characteristics of the built environment that are beneficial to human health. Urban greenness has been associated with improvements in a diverse range of health conditions, including birth outcomes; however, few studies have attempted to distinguish potential effects of greenness from those of other spatially correlated exposures related to the built environment. Objectives: We aimed to investigate associations between residential greenness and birth outcomes and evaluate the influence of spatially correlated built environment factors on these associations. Methods: We examined associations between residential greenness [measured using satellite-derived Normalized Difference Vegetation Index (NDVI) within 100 m of study participants’ homes] and birth outcomes in a cohort of 64,705 singleton births (from 1999–2002) in Vancouver, British Columbia, Canada. We also evaluated associations after adjusting for spatially correlated built environmental factors that may influence birth outcomes, including exposure to air pollution and noise, neighborhood walkability, and distance to the nearest park. Results: An interquartile increase in greenness (0.1 in residential NDVI) was associated with higher term birth weight (20.6 g; 95% CI: 16.5, 24.7) and decreases in the likelihood of small for gestational age, very preterm (< 30 weeks), and moderately preterm (30–36 weeks) birth. Associations were robust to adjustment for air pollution and noise exposures, neighborhood walkability, and park proximity. Conclusions: Increased residential greenness was associated with beneficial birth outcomes in this population-based cohort. These associations did not change after adjusting for other spatially correlated built environment factors, suggesting that alternative pathways (e.g., psychosocial and psychological mechanisms) may underlie associations between residential greenness and birth outcomes. Citation: Hystad P, Davies HW, Frank L, Van Loon J, Gehring U, Tamburic L, Brauer M. 2014. Residential greenness and birth outcomes: evaluating the influence of spatially correlated built-environment factors. Environ Health Perspect 122:1095–1102; http://dx.doi.org/10.1289/ehp.1308049 PMID:25014041

What is Urban? A study of census and satellite-derived urban classes in the United States (1990-2010) with comparisons to India and Mexico

NASA Astrophysics Data System (ADS)

Balk, D.; Leyk, S.; Jones, B.; Clark, A.; Montgomery, M.

2017-12-01

Geographers and demographers have contributed much to understanding urban population and urban place. Yet, we nevertheless remain ill-prepared to fully understand past urban processes and our urban future, and importantly, connect that knowledge to pressing concerns such as climate and environmental change. This is largely due to well-known data limitations and inherent inconsistencies in the urban definition across countries and over time and spatial scales, and because urban models and definitions arise out of disciplinary silos. This paper provides a new framework for urban inquiry in that it combines urban definitions used by the U.S. Census Bureau from 1990-2010 with newly available satellite-based (mostly Landsat) data on built-up area from the Global Human Settlement Layer (GHSL). We identify areas of agreement and disagreement, as well as the population distribution underlying various GHSL derived built-up land thresholds. Our analysis allows for a systematic means of discerning peri-urban areas from other types of urban development, as well as examines differences in these patterns at the national and Metropolitan Statistical Area (MSA)-level. While we find overwhelming areas of agreement - about 70% of the census-designated urban population can be characterized as living on land that is at least 50% built-up - we also learn much of the significant heterogeneity in levels and patterns of growth between different MSAs. We further compare the US results with those for India and Mexico. This research unlocks the potential of such alternative measures for creating globally and temporally consistent proxies of urban land and may guide further research on consistent modeling of spatial demographic urban change, highly urgent for future work to distinguish between fine-scale levels of urban development and to forecast urban expansion.

Assessment of land use and land cover change using spatiotemporal analysis of landscape: case study in south of Tehran.

PubMed

Sabr, Abutaleb; Moeinaddini, Mazaher; Azarnivand, Hossein; Guinot, Benjamin

2016-12-01

In the recent years, dust storms originating from local abandoned agricultural lands have increasingly impacted Tehran and Karaj air quality. Designing and implementing mitigation plans are necessary to study land use/land cover change (LUCC). Land use/cover classification is particularly relevant in arid areas. This study aimed to map land use/cover by pixel- and object-based image classification methods, analyse landscape fragmentation and determine the effects of two different classification methods on landscape metrics. The same sets of ground data were used for both classification methods. Because accuracy of classification plays a key role in better understanding LUCC, both methods were employed. Land use/cover maps of the southwest area of Tehran city for the years 1985, 2000 and 2014 were obtained from Landsat digital images and classified into three categories: built-up, agricultural and barren lands. The results of our LUCC analysis showed that the most important changes in built-up agricultural land categories were observed in zone B (Shahriar, Robat Karim and Eslamshahr) between 1985 and 2014. The landscape metrics obtained for all categories pictured high landscape fragmentation in the study area. Despite no significant difference was evidenced between the two classification methods, the object-based classification led to an overall higher accuracy than using the pixel-based classification. In particular, the accuracy of the built-up category showed a marked increase. In addition, both methods showed similar trends in fragmentation metrics. One of the reasons is that the object-based classification is able to identify buildings, impervious surface and roads in dense urban areas, which produced more accurate maps.

Landscape analysis of urban growth patterns in Seremban, Malaysia, using spatio-temporal data

NASA Astrophysics Data System (ADS)

Aburas, Maher M.; Abdullah, Sabrina H.; Ramli, Mohammad F.; As'shari, Zulfa H.

2016-06-01

Urban growth is one of the major issues that have played a significant role in destroying the ecosystem in recent years. Landscape analysis is an important technique widely used to evaluate urban growth patterns. In this study, four land-use maps from 1984, 1990, 2000, and 2010 have been used to analyze an urban landscape. The values of a built-up area were initially computed using a geographic information system environment based on the spatial gradient approach. Mathematical matrices were then used to determine the amount of change in urban patches in each direction. Results of the number of patches, landscape shape index, aggregation index, and total edges confirmed that the urban patches in Seremban, Malaysia, have become more dispersed from 2000 to 2010. The urban patches have also become more continuous, especially in the north-western part of Seremban as a result of the urban development in the Nilai District. These results indicate the necessity to create new policies in the city to protect the sustainability of the land use of Seremban.

extendFromReads

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Kelly P.

2013-10-03

This package assists in genome assembly. extendFromReads takes as input a set of Illumina (eg, MiSeq) DNA sequencing reads, a query seed sequence and a direction to extend the seed. The algorithm collects all seed-- ]matching reads (flipping reverse-- ]orientation hits), trims off the seed and additional sequence in the other direction, sorts the remaining sequences alphabetically, and prints them aligned without gaps from the point of seed trimming. This produces a visual display distinguishing the flanks of multi- ]copy seeds. A companion script hitMates.pl collects the mates of seed-- ]hi]ng reads, whose alignment reveals longer extensions from the seed.more » The collect/trim/sort strategy was made iterative and scaled up in the script denovo.pl, for de novo contig assembly. An index is pre-- ]built using indexReads.pl that for each unique 21-- ]mer found in all the reads, records its gfate h of extension (whether extendable, blocked by low coverage, or blocked by branching after a duplicated sequence) and other characteristics. Importantly, denovo.pl records all branchings that follow a branching contig endpoint, providing contig- ]extension information« less

High-fire-risk behavior in critical fire areas

Treesearch

William S. Folkman

1977-01-01

Observations of fire-related behavior of wildland visitors were made in three types of areas-wilderness, established campground, and built-up commercial and residential areas-within the San Bernardino National Forest, California. Interviews were conducted with all persons so observed. Types of fire-related behavior differed markedly from one area to another, as did the...

Rebalancing Resources and Incentives in Federal Student Aid

ERIC Educational Resources Information Center

Burd, Stephen; Carey, Kevin; Delisle, Jason; Fishman, Rachel; Holt, Alex; Laitinen, Amy; McCann, Clare

2013-01-01

The federal financial aid system is no longer up to today's demands. Built in a different era, its haphazard evolution over the decades has made it inefficient, poorly targeted, and overly complicated. With the need for higher education never greater and college growing increasingly unaffordable, students deserve a streamlined aid system that is…

Designing and Building a Cardboard Chair: Children's Engineering at the TECA Eastern Regional Conference

ERIC Educational Resources Information Center

Linnell, Charles C.

2007-01-01

This article describes the 2006 Technology Education Collegiate Association (TECA) Eastern Regional elementary competition, wherein teams of technology education students from nine different universities designed and built cardboard chairs. The competition required the teams (four or five to a team) from universities up and down the East Coast to…

Development of Time-Series Human Settlement Mapping System Using Historical Landsat Archive

NASA Astrophysics Data System (ADS)

Miyazaki, H.; Nagai, M.; Shibasaki, R.

2016-06-01

Methodology of automated human settlement mapping is highly needed for utilization of historical satellite data archives for urgent issues of urban growth in global scale, such as disaster risk management, public health, food security, and urban management. As development of global data with spatial resolution of 10-100 m was achieved by some initiatives using ASTER, Landsat, and TerraSAR-X, next goal has targeted to development of time-series data which can contribute to studies urban development with background context of socioeconomy, disaster risk management, public health, transport and other development issues. We developed an automated algorithm to detect human settlement by classification of built-up and non-built-up in time-series Landsat images. A machine learning algorithm, Local and Global Consistency (LLGC), was applied with improvements for remote sensing data. The algorithm enables to use MCD12Q1, a MODIS-based global land cover map with 500-m resolution, as training data so that any manual process is not required for preparation of training data. In addition, we designed the method to composite multiple results of LLGC into a single output to reduce uncertainty. The LLGC results has a confidence value ranging 0.0 to 1.0 representing probability of built-up and non-built-up. The median value of the confidence for a certain period around a target time was expected to be a robust output of confidence to identify built-up or non-built-up areas against uncertainties in satellite data quality, such as cloud and haze contamination. Four scenes of Landsat data for each target years, 1990, 2000, 2005, and 2010, were chosen among the Landsat archive data with cloud contamination less than 20%.We developed a system with the algorithms on the Data Integration and Analysis System (DIAS) in the University of Tokyo and processed 5200 scenes of Landsat data for cities with more than one million people worldwide.

Intersection of neighborhood dynamics and socioeconomic status in small-area walkability: the Heart Healthy Hoods project.

PubMed

Gullón, Pedro; Bilal, Usama; Cebrecos, Alba; Badland, Hannah M; Galán, Iñaki; Franco, Manuel

2017-06-06

Previous studies found a complex relationship between area-level socioeconomic status (SES) and walkability. These studies did not include neighborhood dynamics. Our aim was to study the association between area-level SES and walkability in the city of Madrid (Spain) evaluating the potential effect modification of neighborhood dynamics. All census sections of the city of Madrid (n = 2415) were included. Area-level SES was measured using a composite index of 7 indicators in 4 domains (education, wealth, occupation and living conditions). Two neighborhood dynamics factors were computed: gentrification, proxied by change in education levels in the previous 10 years, and neighborhood age, proxied by median year of construction of housing units in the area. Walkability was measured using a composite index of 4 indicators (Residential Density, Population Density, Retail Destinations and Street Connectivity). We modeled the association using linear mixed models with random intercepts. Area-level SES and walkability were inversely and significantly associated. Areas with lower SES showed the highest walkability. This pattern did not hold for areas with an increase in education level, where the association was flat (no decrease in walkability with higher SES). Moreover, the association was attenuated in newly built areas: the association was stronger in areas built before 1975, weaker in areas built between 1975 and 1990 and flat in areas built from 1990 on. Areas with higher neighborhood socioeconomic status had lower walkability in Madrid. This disadvantage in walkability was not present in recently built or gentrified areas.

Investigating the sources of variability in the dynamic response of built-up structures through a linear analytical model

NASA Astrophysics Data System (ADS)

Abolfathi, Ali; O'Boy, Dan J.; Walsh, Stephen J.; Fisher, Stephen A.

2017-01-01

It is well established that the dynamic response of a number of nominally identical built-up structures are often different and the variability increases with increasing complexity of the structure. Furthermore, the effects of the different parameters, for example the variation in joint locations or the range of the Young's modulus, on the dynamic response of the system are not the same. In this paper, the effects of different material and geometric parameters on the variability of a vibration transfer function are compared using an analytical model of a simple linear built-up structure that consist of two plates connected by a single mount. Similar results can be obtained if multiple mounts are used. The scope of this paper is limited to a low and medium frequency range where usually deterministic models are used for vibrational analysis. The effect of the mount position and also the global variation in the properties of the plate, such as modulus of elasticity or thickness, is higher on the variability of vibration transfer function than the effect of the mount properties. It is shown that the vibration transfer function between the plates is independent of the mount property if a stiff enough mount with a small mass is implemented. For a soft mount, there is a direct relationship between the mount impedance and the variation in the vibration transfer function. Furthermore, there are a range of mount stiffnesses between these two extreme cases at which the vibration transfer function is more sensitive to changes in the stiffness of the mount than when compared to a soft mount. It is found that the effect of variation in the mount damping and the mount mass on the variability is negligible. Similarly, the effect of the plate damping on the variability is not significant.

Temperature sensor based on an isopropanol-sealed photonic crystal fiber in-line interferometer with enhanced refractive index sensitivity.

PubMed

Qiu, Sun-jie; Chen, Ye; Xu, Fei; Lu, Yan-qing

2012-03-01

We fabricate a simple, compact, and stable temperature sensor based on a liquid-sealed photonic crystal fiber (PCF) in-line nonpolarimetric modal interferometer. Different from other reported PCF devices, it does not need expensive polarimetric devices, and the liquid is sealed in one fiber. The device consists of a stub of isopropanol-filled PCF spliced between standard single-mode fibers. The temperature sensitivity (-166 pm/°C) increases over an order of magnitude compared with those of the previous sensors based on air-sealed PCF interferometers built via fusion splicing with the same mechanism. In addition, the refractive index sensitivity also increases. Higher temperature sensitivity can be realized by infiltrating some liquid having a higher thermo-optic coefficient into the microholes of the PCF. © 2012 Optical Society of America

Risk evaluation of highway engineering project based on the fuzzy-AHP

NASA Astrophysics Data System (ADS)

Yang, Qian; Wei, Yajun

2011-10-01

Engineering projects are social activities, which integrate with technology, economy, management and organization. There are uncertainties in each respect of engineering projects, and it needs to strengthen risk management urgently. Based on the analysis of the characteristics of highway engineering, and the study of the basic theory on risk evaluation, the paper built an index system of highway project risk evaluation. Besides based on fuzzy mathematics principle, analytical hierarchy process was used and as a result, the model of the comprehensive appraisal method of fuzzy and AHP was set up for the risk evaluation of express way concessionary project. The validity and the practicability of the risk evaluation of expressway concessionary project were verified after the model was applied to the practice of a project.

Bright Solar Flare

NASA Image and Video Library

2017-12-08

A bright solar flare is captured by the EIT 195Å instrument on 1998 May 2. A solar flare (a sudden, rapid, and intense variation in brightness) occurs when magnetic energy that has built up in the solar atmosphere is suddenly released, launching material outward at millions of km per hour. The Sun’s magnetic fields tend to restrain each other and force the buildup of tremendous energy, like twisting rubber bands, so much that they eventually break. At some point, the magnetic lines of force merge and cancel in a process known as magnetic reconnection, causing plasma to forcefully escape from the Sun. Credit: NASA/GSFC/SOHO/ESA To learn more go to the SOHO website: sohowww.nascom.nasa.gov/home.html To learn more about NASA's Sun Earth Day go here: sunearthday.nasa.gov/2010/index.php

Sources of heterogeneity in studies of the BMI-mortality association.

PubMed

Peter, Raphael Simon; Nagel, Gabriele

2017-06-01

To date, the amount of heterogeneity among studies of the body mass index-mortality association attributable to differences in the age distribution and length of follow-up has not been quantified. Therefore, we wanted to quantify the amount of heterogeneity attributable to age and follow-up in results of studies on the body mass index-mortality relation. We used optima of the body mass index mortality association reported for 30 populations and performed meta-regression to estimate the amount of heterogeneity attributable to sex, ethnicity, mean age at baseline, percentage smokers, and length of follow-up. Ethnicity as single factor accounted for 36% (95% CI, 11-56%) of heterogeneity. Mean age and length of follow-up had an interactive effect and together accounted for 56% (95% CI, 24-74%) of the remaining heterogeneity. Sex did not significantly contribute to the heterogeneity, after controlling for ethnicity, age, and length of follow-up. A considerable amount of heterogeneity in studies of the body mass index-mortality association is attributable to ethnicity, age, and length of follow-up. Copyright © 2017 The Authors. Production and hosting by Elsevier B.V. All rights reserved.

Examining spring and autumn phenology in a temperate deciduous urban woodlot

NASA Astrophysics Data System (ADS)

Yu, Rong

This dissertation is an intensive phenological study in a temperate deciduous urban woodlot over six consecutive years (2007-2012). It explores three important topics related to spring and autumn phenology, as well as ground and remote sensing phenology. First, it examines key climatic factors influencing spring and autumn phenology by conducting phenological observations four days a week and recording daily microclimate measurements. Second, it investigates the differences in phenological responses between an urban woodlot and a rural forest by employing comparative basswood phenological data. Finally, it bridges ground visual phenology and remote sensing derived phenological changes by using the Normalized Difference Vegetation Index (NDVI) and Enhanced Vegetation Index (EVI) derived from the Moderate Resolution Imaging Spectro-radiometer (MODIS). The primary outcomes are as follows: 1) empirical spatial regression models for two dominant tree species - basswood and white ash - have been built and analyzed to detect spatial patterns and possible causes of phenological change; the results show that local urban settings significantly affect phenology; 2) empirical phenological progression models have been built for each species and the community as a whole to examine how phenology develops in spring and autumn; the results indicate that the critical factor influencing spring phenology is AGDD (accumulated growing degree-days) and for autumn phenology, ACDD (accumulated chilling degree-days) and day length; and 3) satellite derived phenological changes have been compared with ground visual community phenology in both spring and autumn seasons, and the results confirm that both NDVI and EVI depict vegetation dynamics well and therefore have corresponding phenological meanings.

A mobile agent-based moving objects indexing algorithm in location based service

NASA Astrophysics Data System (ADS)

Fang, Zhixiang; Li, Qingquan; Xu, Hong

2006-10-01

This paper will extends the advantages of location based service, specifically using their ability to management and indexing the positions of moving object, Moreover with this objective in mind, a mobile agent-based moving objects indexing algorithm is proposed in this paper to efficiently process indexing request and acclimatize itself to limitation of location based service environment. The prominent feature of this structure is viewing moving object's behavior as the mobile agent's span, the unique mapping between the geographical position of moving objects and span point of mobile agent is built to maintain the close relationship of them, and is significant clue for mobile agent-based moving objects indexing to tracking moving objects.

Remote sensing research on fragile ecological environment in continental river basin

NASA Astrophysics Data System (ADS)

Wang, Ranghui; Peng, Ruyan; Zhang, Huizhi

2003-07-01

Based on some remote sensing data and software platform of image processing and analysis, the standard image for ecological thematic mapping is decided. Moreover, the vegetation type maps and land sandy desertification type maps are made. Relaying on differences of natural resources and ecological environment in Tarim River Basin, the assessment indicator system and ecological fragility index (EFI) of ecological environment are built up. The assessment results are very severely. That is, EFI is only 0.08 in Akesu River Basin, it belongs to slight fragility area. EFI of Yarkant River Basin and upper reaches of Tarim River Basin are 0.23 and 0.25 respectively, both of them belong to general fragility areas. Meanwhile, EFI of Hotan River Basin and middle reaches of Tarim River Basin are 0.32 and 0.49 respectively; they all belong to middle fragility areas. However, the fragility of the lower reaches of Tarim River Basin belongs to severe fragility area that the EFI is 0.87.The maladjustment among water with hot and land as well as salt are hindrance of energy transfer and material circulation and information transmission. It is also the main reason that caused ecological environment fragility.

An Alternative Approach of Coastal Sea-Level Observation from Remote Sensing Imageries

NASA Astrophysics Data System (ADS)

Peng, H. Y.; Tseng, K. H.; Chung-Yen, K.; Lin, T. H.; Liao, W. H.; Chen, C. F.

2017-12-01

Coastal sea level can be observed as waterline changes along a coastal digital elevation model (DEM). However, most global DEMs, such as the Shuttle Radar Topography Mission (SRTM) DEM with 30 m resolution, provide limited coverage over coastal area due to the impermeability of radar signal over water and the lack of low-tide coincidence. Therefore, we aim to extend to coverage of SRTM DEM for the determination of intertidal zone and to monitor sea-level changes along the entire coastline of Taiwan (>1200km). We firstly collect historical cloud-free images since the 1980s, including Landsat series, SPOT series and Sentinel-2, and then calculate the Modified Normalized Difference Water Index (MNDWI) to identify water pixels. After computing water appearance probability of each pixel, it is converted into actual elevation by introducing the DTU10 tide model for high tide and low tide boundaries. A coastal DEM of intertidal zone is reconstructed and the accuracy is at 50 cm level as compared with in situ DEM built by an unmanned aerial vehicle (UAV). Finally, we use this product to define the up-to-date intertidal zone and estimate sea-level changes by using remote sensing snapshots.

Perceived neighborhood environmental attributes associated with adults’ transport-related walking and cycling: Findings from the USA, Australia and Belgium

PubMed Central

2012-01-01

Background Active transportation has the potential to contribute considerably to overall physical activity levels in adults and is likely to be influenced by neighborhood-related built environment characteristics. Previous studies that examined the associations between built environment attributes and active transportation, focused mainly on transport-related walking and were conducted within single countries, limiting environmental variability. We investigated the direction and shape of relationships of perceived neighborhood attributes with transport-related cycling and walking in three countries; and examined whether these associations differed by country and gender. Methods Data from the USA (Baltimore and Seattle), Australia (Adelaide) and Belgium (Ghent) were pooled. In total, 6,014 adults (20–65 years, 55.7% women) were recruited in high-/low-walkable and high-/low-income neighborhoods. All participants completed the Neighborhood Environmental Walkability Scale and the International Physical Activity Questionnaire. Generalized additive mixed models were used to estimate the strength and shape of the associations. Results Proximity to destinations, good walking and cycling facilities, perceiving difficulties in parking near local shopping areas, and perceived aesthetics were included in a ‘cyclability’ index. This index was linearly positively related to transport-related cycling and no gender- or country-differences were observed. The ‘walkability’ index consisted of perceived residential density, land use mix access, proximity of destinations and aesthetics. A non-linear positive relationship with transport-related walking was found. This association was stronger in women than in men, and country-specific associations were identified: the strongest association was observed in Seattle, the weakest in Adelaide. In Ghent, the association weakened at higher levels of walkability. Conclusions For cycling, consistent correlates were found in the three countries, but associations were less straightforward for transport-related walking. Moreover, the identified neighborhood environmental correlates were different for walking compared to cycling. In order to further clarify the shape of these associations and reach more specific international guidelines for developing walkable and bikeable neighborhoods, future studies should include even more countries to maximize environmental variability. PMID:22691723

The Built Environment and Childhood Obesity in Durham, NC

PubMed Central

Miranda, Marie Lynn; Edwards, Sharon E.; Anthopolos, Rebecca; Dolinsky, Diana H.; Kemper, Alex R.

2013-01-01

The relationship between childhood obesity and aspects of the built environment characterizing neighborhood social context is understudied. We evaluate the association between seven built environment domains and childhood obesity in Durham, NC. Measures of housing damage, property disorder, vacancy, nuisances, and territoriality were constructed using data from a 2008 community assessment. Renter-occupied housing and crime measures were developed from public databases. We linked these measures to 2008–2009 Duke University Medical Center pediatric preventive care visits. Age- and sex-specific body mass index percentiles were used to classify children as normal weight (>5th and ≤ 85th percentile), overweight (>85th and ≤ 95th percentile), or obese (> 95th percentile). Ordinal logistic regression models with cluster-corrected standard errors evaluated the association between weight status and the built environment. Adjusting for child-level socioeconomic characteristics, nuisances and crime were associated with childhood overweight/obesity (P<0.05). Built environment characteristics appear important to childhood weight status in Durham, NC. PMID:22563061

Climate Literacy: Climate.gov Follow-Up Evaluation—A Study of the Four NOAA Audiences

NASA Astrophysics Data System (ADS)

Niepold, F., III; Sullivan, S. B.; Gold, A. U.; Lynds, S. E.; Kirk, K.

2014-12-01

NOAA Climate.gov provides science and information for a climate-smart nation. Americans' health, security, and economic well-being are closely linked to climate and weather. NOAA Climate.gov's goals are to promote public understanding of climate science and climate-related events, to make our data products and services easy to access and use, to support educators in improving the nations climate literacy, and to serve people making climate-related decisions with tools and resources that help them answer specific questions.The Climate.Gov Follow-Up Study of the four NOAA Audiences (climate interested public, educators, scientists, policy-makers) built upon the previous literature review and evaluation study conducted by Mooney and Phillips in 2010 and 2012, http://tinyurl.com/ma8vo83. The CIRES Education and Outreach team at the Cooperative Institute for Research in Environmental Sciences at University of Colorado at Boulder and the NOAA Climate.gov team will present results of the new study that used the Quality of Relationship index (awareness, trust, satisfaction, usability, and control mutuality). This index was developed in the previous study and places a new emphasis on the experience of individual users from the four audiences in their regular work or home setting. This new evaluation project used mixed methods, including an online survey, usability studies, phone interviews, and web statistics, providing multiple lines of evidence from which to draw conclusion and recommendations.In the session, we will explore how the NOAA Climate.gov teams used the literature review and new CIRES research to address underlying challenges to achieving the portal's goals. The research in these studies finds that people seek information in ways that are complex and that they do so by consulting a vast array of technologies. Improved and different modes of access to information have, throughout history, been led by technological innovation, but human behavior tends to be constant. The NOAA Climate.gov portal improved its design informed by the first literature review and evaluation. We will discuss how the follow-up study will inform continual audience-focused design and innovation for maximizing the effectiveness of the multiple audience portal.

An equilibrium analysis of the land use structure in the Yunnan Province, China

NASA Astrophysics Data System (ADS)

van Aken, H. M.; van Veldhoven, A. K.; Veth, C.; de Ruijter, W. P. M.; van Leeuwen, P. J.; Drijfhout, S. S.; Whittle, C. P.; Rouault, M.

2014-06-01

Global land use structure is changing rapidly due to unceasing population growth and accelerated urbanization, which leads to fierce competition between the rigid demand for built-up area and the protection of cultivated land, forest, and grassland. It has been a great challenge to realize the sustainable development of land resources. Based on a computable general equilibrium model of land use change with a social accounting matrix dataset, this study implemented an equilibrium analysis of the land use structure in the Yunnan Province during the period of 2008-2020 under three scenarios, the baseline scenario, low TFP (total factor productivity) scenario, and high TFP scenario. The results indicated that under all three scenarios, area of cultivated land declined significantly along with a remarkable expansion of built-up area, while areas of forest, grassland, and unused land increased slightly. The growth rate of TFP had first negative and then positive effects on the expansion of built-up area and decline of cultivated land as it increased. Moreover, the simulated changes of both cultivated land and built-up area were the biggest under the low TFP scenario, and far exceeded the limit in the Overall Plan for Land Utilization in the Yunnan Province in 2020. The scenario-based simulation results are of important reference value for policy-makers in making land use decisions, balancing the fierce competition between the protection of cultivated land and the increasing demand for built-up area, and guaranteeing food security, ecological security, and the sustainable development of land resources.

An equilibrium analysis of the land use structure in the Yunnan Province, China

NASA Astrophysics Data System (ADS)

Luo, Jiao; Zhan, Jinyan; Lin, Yingzhi; Zhao, Chunhong

2014-09-01

Global land use structure is changing rapidly due to unceasing population growth and accelerated urbanization, which leads to fierce competition between the rigid demand for built-up area and the protection of cultivated land, forest, and grassland. It has been a great challenge to realize the sustainable development of land resources. Based on a computable general equilibrium model of land use change with a social accounting matrix dataset, this study implemented an equilibrium analysis of the land use structure in the Yunnan Province during the period of 2008-2020 under three scenarios, the baseline scenario, low TFP (total factor productivity) scenario, and high TFP scenario. The results indicated that under all three scenarios, area of cultivated land declined significantly along with a remarkable expansion of built-up area, while areas of forest, grassland, and unused land increased slightly. The growth rate of TFP had first negative and then positive effects on the expansion of built-up area and decline of cultivated land as it increased. Moreover, the simulated changes of both cultivated land and built-up area were the biggest under the low TFP scenario, and far exceeded the limit in the Overall Plan for Land Utilization in the Yunnan Province in 2020. The scenario-based simulation results are of important reference value for policy-makers in making land use decisions, balancing the fierce competition between the protection of cultivated land and the increasing demand for built-up area, and guaranteeing food security, ecological security, and the sustainable development of land resources.

The Campus Demotechnic Index: A comparison of technological energy consumption at U.S. colleges and universities

NASA Astrophysics Data System (ADS)

Vance, Leisha Ann

The Campus Demotechnic Index (CDI) is a normalized metric developed to provide universities with a method for tracking progress toward or retreat from sustainability in their energy consumption. The CDI is modified after the Demotechnic Index of Mata et al. (1994). CDI values assess the total campus energy consumed against the total energy required to meet the campus population's basal metabolism. Like the D-Index, the CDI is thus a measure of the scalar quantity of energy consumed in excess of the quantity of energy required for simple survival on a per capita basis. For this research, data were collected from an on-line survey designed for U.S. colleges and universities, which requested information related to campus demographics and campus built and mobile environmental energy consumption. Data were requested for the years of 2000 to 2005. Wilcoxon signed rank test analyses were conducted to determine if CDI values significantly increased over time. ANOVAs, GLMs, correlations and regressions were conducted to determine if climate and campus size significantly influenced CDI. ANOVAs, correlations and regressions were conducted to determine the effect of acreage on mobile fuel consumption and to ascertain whether differing proportions between the built and mobile environments significantly influenced CDI values. Correlations and regressions were carried out to which variables best predicted CDI, and cluster analyses were conducted to find out if any significant groups existed based on CDI values, fossil fuel consumption and population per square foot. The knowledge gained from results of these analyses not only provides a depiction of campus energy consumption, but also puts campus energy consumption into context in that CDI scores allow peer institutional comparisons. Awareness of factors that contribute to campus energy use (and CDI ranks) could also facilitate prioritization of sustainability-related issues, as well as the design and establishment of sustainable management systems.

Asymmetric nanofluidic grating detector for differential refractive index measurement and biosensing.

PubMed

Purr, F; Bassu, M; Lowe, R D; Thürmann, B; Dietzel, A; Burg, T P

2017-12-05

Measuring small changes in refractive index can provide both sensitive and contactless information on molecule concentration or process conditions for a wide range of applications. However, refractive index measurements are easily perturbed by non-specific background signals, such as temperature changes or non-specific binding. Here, we present an optofluidic device for measuring refractive index with direct background subtraction within a single measurement. The device is comprised of two interdigitated arrays of nanofluidic channels designed to form an optical grating. Optical path differences between the two sets of channels can be measured directly via an intensity ratio within the diffraction pattern that forms when the grating is illuminated by a collimated laser beam. Our results show that no calibration or biasing is required if the unit cell of the grating is designed with an appropriate built-in asymmetry. In proof-of-concept experiments we attained a noise level equivalent to ∼10 -5 refractive index units (30 Hz sampling rate, 4 min measurement interval). Furthermore, we show that the accumulation of biomolecules on the surface of the nanochannels can be measured in real-time. Because of its simplicity and robustness, we expect that this inherently differential measurement concept will find many applications in ultra-low volume analytical systems, biosensors, and portable devices.

Global empirical model of TEC response to geomagnetic activity

NASA Astrophysics Data System (ADS)

Mukhtarov, P.; Andonov, B.; Pancheva, D.

2013-10-01

global total electron content (TEC) model response to geomagnetic activity described by the Kp index is built by using the Center for Orbit Determination of Europe (CODE) TEC data for a full 13 years, January 1999 to December 2011. The model describes the most probable spatial distribution and temporal variability of the geomagnetically forced TEC anomalies assuming that these anomalies at a given modified dip latitude depend mainly on the Kp index, local time (LT), and longitude. The geomagnetic anomalies are expressed by the relative deviation of TEC from its 15 day median and are denoted as rTEC. The rTEC response to the geomagnetic activity is presented by a sum of two responses with different time delay constants and different signs of the cross-correlation function. It has been found that the mean dependence of rTEC on Kp index can be expressed by a cubic function. The LT dependence of rTEC is described by Fourier time series which includes the contribution of four diurnal components with periods 24, 12, 8, and 6 h. The rTEC dependence on longitude is presented by Fourier series which includes the contribution of zonal waves with zonal wave numbers up to 6. In order to demonstrate how the model is able to reproduce the rTEC response to geomagnetic activity, three geomagnetic storms at different seasons and solar activity conditions are presented. The model residuals clearly reveal two types of the model deviation from the data: some underestimation of the largest TEC response to the geomagnetic activity and randomly distributed errors which are the data noise or anomalies generated by other sources. The presented TEC model fits to the CODE TEC input data with small negative bias of -0.204, root mean squares error RMSE = 4.592, and standard deviation error STDE = 4.588. The model offers TEC maps which depend on geographic coordinates (5° × 5° in latitude and longitude) and universal time (UT) at given geomagnetic activity and day of the year. It could be used for both science and possible service (nowcasting and short-term prediction); for the latter, a detailed validation of the model at different geophysical conditions has to be performed in order to clarify the model predicting quality.

Nonsphericity Index and Size Ratio Identify Morphologic Differences between Growing and Stable Aneurysms in a Longitudinal Study of 93 Cases.

PubMed

Chien, A; Xu, M; Yokota, H; Scalzo, F; Morimoto, E; Salamon, N

2018-01-25

Recent studies have strongly associated intracranial aneurysm growth with increased risk of rupture. Identifying aneurysms that are likely to grow would be beneficial to plan more effective monitoring and intervention strategies. Our hypothesis is that for unruptured intracranial aneurysms of similar size, morphologic characteristics differ between aneurysms that continue to grow and those that do not. From aneurysms in our medical center with follow-up imaging dates in 2015, ninety-three intracranial aneurysms (23 growing, 70 stable) were selected. All CTA images for the aneurysm diagnosis and follow-up were collected, a total of 348 3D imaging studies. Aneurysm 3D geometry for each imaging study was reconstructed, and morphologic characteristics, including volume, surface area, nonsphericity index, aspect ratio, and size ratio were calculated. Morphologic characteristics were found to differ between growing and stable groups. For aneurysms of <3 mm, nonsphericity index ( P < .001); 3-5 mm, nonsphericity index ( P < .001); 5-7 mm, size ratio ( P = .003); >7 mm, volume ( P < .001); surface area ( P < .001); and nonsphericity index ( P = .002) were significant. Within the anterior communicating artery, the nonsphericity index ( P = .008) and, within the posterior communicating artery, size ratio ( P = .004) were significant. The nonsphericity index receiver operating characteristic area under the curve was 0.721 for discriminating growing and stable cases on the basis of initial images. Among aneurysms with similar sizes, morphologic characteristics appear to differ between those that are growing and those that are stable. The nonsphericity index, in particular, was found to be higher among growing aneurysms. The size ratio was found to be the second most significant parameter associated with growth. © 2018 by American Journal of Neuroradiology.

Complicated Politics to the Core

ERIC Educational Resources Information Center

McGuinn, Patrick

2015-01-01

People dislike the Common Core for several different reasons, and so it is important to disaggregate the sources of opposition and to assess and then to dispel some of the myths that have built up around it. It also is important to understand the unusual political alliances that have emerged in opposition to Common Core implementation and how they…

Error Analysis of p-Version Discontinuous Galerkin Method for Heat Transfer in Built-up Structures

NASA Technical Reports Server (NTRS)

Kaneko, Hideaki; Bey, Kim S.

2004-01-01

The purpose of this paper is to provide an error analysis for the p-version of the discontinuous Galerkin finite element method for heat transfer in built-up structures. As a special case of the results in this paper, a theoretical error estimate for the numerical experiments recently conducted by James Tomey is obtained.

Promises Of Political Dialogue: Changes In Myanmar’s Ceasefire Process

DTIC Science & Technology

2017-12-01

groups’ decisions of whether to sign the accord. Due to the built-up mistrust of the military government from broken ceasefire promises of economic ...the accord. Due to the built-up mistrust of the military government from broken ceasefire promises of economic development and political dialogue...1989–1995) .......................................17 A. POLITICAL- ECONOMIC CONTEXT PRIOR TO THE BILATERAL CEASEFIRES

Identification of Mobile Phones Using the Built-In Magnetometers Stimulated by Motion Patterns.

PubMed

Baldini, Gianmarco; Dimc, Franc; Kamnik, Roman; Steri, Gary; Giuliani, Raimondo; Gentile, Claudio

2017-04-06

We investigate the identification of mobile phones through their built-in magnetometers. These electronic components have started to be widely deployed in mass market phones in recent years, and they can be exploited to uniquely identify mobile phones due their physical differences, which appear in the digital output generated by them. This is similar to approaches reported in the literature for other components of the mobile phone, including the digital camera, the microphones or their RF transmission components. In this paper, the identification is performed through an inexpensive device made up of a platform that rotates the mobile phone under test and a fixed magnet positioned on the edge of the rotating platform. When the mobile phone passes in front of the fixed magnet, the built-in magnetometer is stimulated, and its digital output is recorded and analyzed. For each mobile phone, the experiment is repeated over six different days to ensure consistency in the results. A total of 10 phones of different brands and models or of the same model were used in our experiment. The digital output from the magnetometers is synchronized and correlated, and statistical features are extracted to generate a fingerprint of the built-in magnetometer and, consequently, of the mobile phone. A SVM machine learning algorithm is used to classify the mobile phones on the basis of the extracted statistical features. Our results show that inter-model classification (i.e., different models and brands classification) is possible with great accuracy, but intra-model (i.e., phones with different serial numbers and same model) classification is more challenging, the resulting accuracy being just slightly above random choice.

Identification of Mobile Phones Using the Built-In Magnetometers Stimulated by Motion Patterns

PubMed Central

Baldini, Gianmarco; Dimc, Franc; Kamnik, Roman; Steri, Gary; Giuliani, Raimondo; Gentile, Claudio

2017-01-01

We investigate the identification of mobile phones through their built-in magnetometers. These electronic components have started to be widely deployed in mass market phones in recent years, and they can be exploited to uniquely identify mobile phones due their physical differences, which appear in the digital output generated by them. This is similar to approaches reported in the literature for other components of the mobile phone, including the digital camera, the microphones or their RF transmission components. In this paper, the identification is performed through an inexpensive device made up of a platform that rotates the mobile phone under test and a fixed magnet positioned on the edge of the rotating platform. When the mobile phone passes in front of the fixed magnet, the built-in magnetometer is stimulated, and its digital output is recorded and analyzed. For each mobile phone, the experiment is repeated over six different days to ensure consistency in the results. A total of 10 phones of different brands and models or of the same model were used in our experiment. The digital output from the magnetometers is synchronized and correlated, and statistical features are extracted to generate a fingerprint of the built-in magnetometer and, consequently, of the mobile phone. A SVM machine learning algorithm is used to classify the mobile phones on the basis of the extracted statistical features. Our results show that inter-model classification (i.e., different models and brands classification) is possible with great accuracy, but intra-model (i.e., phones with different serial numbers and same model) classification is more challenging, the resulting accuracy being just slightly above random choice. PMID:28383482

Stochastic modeling of soundtrack for efficient segmentation and indexing of video

NASA Astrophysics Data System (ADS)

Naphade, Milind R.; Huang, Thomas S.

1999-12-01

Tools for efficient and intelligent management of digital content are essential for digital video data management. An extremely challenging research area in this context is that of multimedia analysis and understanding. The capabilities of audio analysis in particular for video data management are yet to be fully exploited. We present a novel scheme for indexing and segmentation of video by analyzing the audio track. This analysis is then applied to the segmentation and indexing of movies. We build models for some interesting events in the motion picture soundtrack. The models built include music, human speech and silence. We propose the use of hidden Markov models to model the dynamics of the soundtrack and detect audio-events. Using these models we segment and index the soundtrack. A practical problem in motion picture soundtracks is that the audio in the track is of a composite nature. This corresponds to the mixing of sounds from different sources. Speech in foreground and music in background are common examples. The coexistence of multiple individual audio sources forces us to model such events explicitly. Experiments reveal that explicit modeling gives better result than modeling individual audio events separately.

Upper-Level Mediterranean Oscillation index and seasonal variability of rainfall and temperature

NASA Astrophysics Data System (ADS)

Redolat, Dario; Monjo, Robert; Lopez-Bustins, Joan A.; Martin-Vide, Javier

2018-02-01

The need for early seasonal forecasts stimulates continuous research in climate teleconnections. The large variability of the Mediterranean climate presents a greater difficulty in predicting climate anomalies. This article reviews teleconnection indices commonly used for the Mediterranean basin and explores possible extensions of one of them, the Mediterranean Oscillation index (MOi). In particular, the anomalies of the geopotential height field at 500 hPa are analyzed using segmentation of the Mediterranean basin in seven spatial windows: three at eastern and four at western. That is, different versions of an Upper-Level Mediterranean Oscillation index (ULMOi) were calculated, and monthly and annual variability of precipitation and temperature were analyzed for 53 observatories from 1951 to 2015. Best versions were selected according to the Pearson correlation, its related p value, and two measures of standardized error. The combination of the Balearic Sea and Libya/Egypt windows was the best for precipitation and temperature, respectively. The ULMOi showed the highest predictive ability in combination with the Atlantic Multidecadal Oscillation index (AMOi) for the annual temperature throughout the Mediterranean basin. The best model built from the indices presented a final mean error between 15 and 25% in annual precipitation for most of the studied area.

The Effects of Landuse Changes on Osse-Ossiomo River Basin Hydrology: a Nigerian example

NASA Astrophysics Data System (ADS)

Ikhile, C. I.

2006-05-01

The Osse-Ossiomo River Basin of Edo State, Nigeria was investigated in terms of landuse changes from 1970 to 2000 using Geographic Information System (GIS). The landuse classes investigated included built-up areas, other settlements, vegetation, agriculture, transportation network and water bodies. The topography map of 1965, Landsat ETM images of 1987 and 2000 were used to investigate these changes. The AutoCAD 2000 and Arcview GIS 3.2 softwares were also used. Results obtained show that landuse in Osse-Ossiomo River Basin has changed between 1970 and 2000. The built-up area is principally Benin City. As at 1965, the areal extent was about 25 km2 or 2,500 hectares, which increased to 645 km2 or 64,500 hectares in 1987 and 804 km2 or 80,400 hectares by 2000. The other settlements, which included very many villages of different sizes (ranging from 5km to 10km) have merged with Benin City metropolis. The number of roads has increased and the original tropical rainforest vegetation has changed to a more open guinea savanna vegetation type. The very many rubber plantations that existed in the 1960's have been drastically converted to built-up areas and farm lands. These changes are occasioned by rapid population growth and have impacted seriously on the basin hydrology leading to turbid water and increased flood magnitudes. Appropriate landuse laws are recommended to check the eventual destruction of the natural ecosystem and the dynamic modification of the basin hydrology.

Zone of influence for particle number concentrations at signalised traffic intersections

NASA Astrophysics Data System (ADS)

Goel, Anju; Kumar, Prashant

2015-12-01

Estimation of zone of influences (ZoI) at signalised traffic intersections (TI) is important to accurately model particle number concentrations (PNCs) and their exposure to public at emission hotspot locations. However, estimates of ZoI for PNCs at different types of TIs are barely known. We carried out mobile measurements inside the car cabin with windows fully open for size-resolved PNCs in the 5-560 nm range on a 6 km long busy round route that had 10 TIs. These included four-way TIs without built-up area (TI4w-nb), four-way TIs with built-up area (TI4w-wb), three-way TIs without built-up area (TI3w-nb) and three-way TIs with built-up area (TI3w-wb). Mobile measurements were made with a fast response differential mobility spectrometer (DMS50). Driving speed and position of the car were recorded every second using a global positioning system (GPS). Positive matrix factorisation (PMF) modelling was applied on the data to quantify the contribution of PNCs released during deceleration, creep-idling, acceleration and cruising to total PNCs at the TIs. The objectives were to address the following questions: (i) how does ZoI vary at different types of TIs in stop- and go-driving conditions?, (ii) what is the effect of different driving conditions on ZoI of a TI?, (iii) how realistically can the PNC profiles be generalised within a ZoI of a TI?, and (iv) what is the share of emissions during different driving conditions towards the total PNCs at a TI? Average length of ZoI in longitudinal direction and along the road was found to be the highest (148 m; 89 to -59 m from the centre of a TI) at a TI3w-wb, followed by TI4w-nb (129 m; 79 to -42 m), TI3w-nb (86 m; 71 to -15 m) and TI4w-wb (79 m; 46 to -33 m) in stop- and go-driving conditions. During multiple stopping driving conditions when a vehicle stops at a TI more than once in a signal cycle due to oversaturation of vehicles, average length of ZoI increased by 55, 22 and 21% at TI4w-nb, TI3w-nb and TI3w-wb, respectively, compared with stop- and go-driving conditions. Within average length of ZoI in stop- and go- driving conditions, PNCs followed a three degree polynomial form at all TIs. Dimensional analysis suggested that coefficients of polynomial equations at both four-way and three-way TIs were mainly influenced by delay time, wind speed and particle number flux. The PMF analysis suggested that deceleration contributed the most to total PNCs at all TIs, except TI4w-wb. Findings of this study are a step forward to understand the contribution of different driving conditions towards the total PNCs and their exposure at the TIs.

TU-AB-BRC-11: Moving a GPU-OpenCL-Based Monte Carlo (MC) Dose Engine Towards Routine Clinical Use: Automatic Beam Commissioning and Efficient Source Sampling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tian, Z; Folkerts, M; Jiang, S

Purpose: We have previously developed a GPU-OpenCL-based MC dose engine named goMC with built-in analytical linac beam model. To move goMC towards routine clinical use, we have developed an automatic beam-commissioning method, and an efficient source sampling strategy to facilitate dose calculations for real treatment plans. Methods: Our commissioning method is to automatically adjust the relative weights among the sub-sources, through an optimization process minimizing the discrepancies between calculated dose and measurements. Six models built for Varian Truebeam linac photon beams (6MV, 10MV, 15MV, 18MV, 6MVFFF, 10MVFFF) were commissioned using measurement data acquired at our institution. To facilitate dose calculationsmore » for real treatment plans, we employed inverse sampling method to efficiently incorporate MLC leaf-sequencing into source sampling. Specifically, instead of sampling source particles control-point by control-point and rejecting the particles blocked by MLC, we assigned a control-point index to each sampled source particle, according to MLC leaf-open duration of each control-point at the pixel where the particle intersects the iso-center plane. Results: Our auto-commissioning method decreased distance-to-agreement (DTA) of depth dose at build-up regions by 36.2% averagely, making it within 1mm. Lateral profiles were better matched for all beams, with biggest improvement found at 15MV for which root-mean-square difference was reduced from 1.44% to 0.50%. Maximum differences of output factors were reduced to less than 0.7% for all beams, with largest decrease being from1.70% to 0.37% found at 10FFF. Our new sampling strategy was tested on a Head&Neck VMAT patient case. Achieving clinically acceptable accuracy, the new strategy could reduce the required history number by a factor of ∼2.8 given a statistical uncertainty level and hence achieve a similar speed-up factor. Conclusion: Our studies have demonstrated the feasibility and effectiveness of our auto-commissioning approach and new efficient source sampling strategy, implying the potential of our GPU-based MC dose engine goMC for routine clinical use.« less

Association Between the Built Environment in School Neighborhoods With Physical Activity Among New York City Children, 2012

PubMed Central

Gray, Heewon Lee; Quinn, James; Rundle, Andrew G.; Contento, Isobel R.; Koch, Pamela A.

2016-01-01

Introduction The benefits of physical activity for health and well-being are well established, yet built environment characteristics in the school neighborhood may constrain students’ ability to engage in physical activity and contribute to the considerable variation in physical activity among students at different schools. Methods Baseline data from the Food, Health and Choices obesity prevention trial were used to create multilevel linear models of the relationship between fifth-grade students’ (n = 952) physical activity and related psychosocial factors and characteristics of the built environment of the school’s neighborhood (park access, public transportation density, total crime, and walkability), controlling for age and body mass index z scores. Results Total crime was inversely associated with boys’ light physical activity duration (β = −0.189; P = .02) and behavioral intention for physical activity (β = −0.178; P = .03). Boys’ habit strength for physical activity was positively associated with public transportation density (β = 0.375; P = .02) and negatively associated with total crime (β = −0.216; P = .01), explaining 67% of between-school variation. Girls’ frequency of light physical activity was positively associated with park access (β = 0.188; P = .04). Built environment characteristics explained 97% of the between-school variation in girls’ self-efficacy in walking for exercise. Conclusions Characteristics of the built environment surrounding schools were associated with and explain between-school variation in students’ physical activity and several theory-based psychosocial factors. Partnerships between public health practitioners, policy makers, and school administrators may be warranted to shape the school neighborhood, specifically to decrease crime rates and increase park access, to encourage physical activity in youth. PMID:27536902

Interactions of psychosocial factors with built environments in explaining adolescents' active transportation.

PubMed

Wang, Xiaobo; Conway, Terry L; Cain, Kelli L; Frank, Lawrence D; Saelens, Brian E; Geremia, Carrie; Kerr, Jacqueline; Glanz, Karen; Carlson, Jordan A; Sallis, James F

2017-07-01

The present study examined independent and interacting associations of psychosocial and neighborhood built environment variables with adolescents' reported active transportation. Moderating effects of adolescent sex were explored. Mixed-effects regression models were conducted on data from the Teen Environment and Neighborhood observational study (N=928) in the Seattle, WA and Baltimore regions 2009-2011. Frequency index of active transportation to neighborhood destinations (dependent variable) and 7 psychosocial measures were reported by adolescents. Built environment measures included home walkability and count of nearby parks and recreation facilities using GIS procedures and streetscape quality from environmental audits. Results indicated all 3 environmental variables and 3 psychosocial variables (self-efficacy, social support from peers, and enjoyment of physical activity) had significant positive main effects with active transportation (Ps<0.05). Three of 21 two-way interactions were significant in explaining active transportation (Ps<0.1): self-efficacy×GIS-based walkability index, barriers to activity in neighborhood×MAPS streetscape scores, and self-efficacy×GIS-based counts of parks and recreation facilities. In each two-way interaction the highest active transportation was found among adolescents with the combination of activity-supportive built environment and positive psychosocial characteristics. Three-way interactions with sex indicated similar associations for girls and boys, with one exception. Results provided modest support for the ecological model principle of interactions across levels, highlight the importance of both built environment and psychosocial factors in shaping adolescents' active transportation, demonstrated the possibility of sex-specific findings, and suggested strategies for improving adolescents' active transportation may be most effective when targeting multiple levels of influence. Copyright © 2017 Elsevier Inc. All rights reserved.

Genome composition and phylogeny of microbes predict their co-occurrence in the environment

PubMed Central

2017-01-01

The genomic information of microbes is a major determinant of their phenotypic properties, yet it is largely unknown to what extent ecological associations between different species can be explained by their genome composition. To bridge this gap, this study introduces two new genome-wide pairwise measures of microbe-microbe interaction. The first (genome content similarity index) quantifies similarity in genome composition between two microbes, while the second (microbe-microbe functional association index) summarizes the topology of a protein functional association network built for a given pair of microbes and quantifies the fraction of network edges crossing organismal boundaries. These new indices are then used to predict co-occurrence between reference genomes from two 16S-based ecological datasets, accounting for phylogenetic relatedness of the taxa. Phylogenetic relatedness was found to be a strong predictor of ecological associations between microbes which explains about 10% of variance in co-occurrence data, but genome composition was found to be a strong predictor as well, it explains up to 4% the variance in co-occurrence when all genomic-based indices are used in combination, even after accounting for evolutionary relationships between the species. On their own, the metrics proposed here explain a larger proportion of variance than previously reported more complex methods that rely on metabolic network comparisons. In summary, results of this study indicate that microbial genomes do indeed contain detectable signal of organismal ecology, and the methods described in the paper can be used to improve mechanistic understanding of microbe-microbe interactions. PMID:28152007

Historical GIS Data and Changes in Urban Morphological Parameters for the Analysis of Urban Heat Islands in Hong Kong

NASA Astrophysics Data System (ADS)

Peng, F.; Wong, M. S.; Nichol, J. E.; Chan, P. W.

2016-06-01

Rapid urban development between the 1960 and 2010 decades have changed the urban landscape and pattern in the Kowloon Peninsula of Hong Kong. This paper aims to study the changes of urban morphological parameters between the 1985 and 2010 and explore their influences on the urban heat island (UHI) effect. This study applied a mono-window algorithm to retrieve the land surface temperature (LST) using Landsat Thematic Mapper (TM) images from 1987 to 2009. In order to estimate the effects of local urban morphological parameters to LST, the global surface temperature anomaly was analysed. Historical 3D building model was developed based on aerial photogrammetry technique using aerial photographs from 1964 to 2010, in which the urban digital surface models (DSMs) including elevations of infrastructures and buildings have been generated. Then, urban morphological parameters (i.e. frontal area index (FAI), sky view factor (SVF)), vegetation fractional cover (VFC), global solar radiation (GSR), Normalized Difference Built-Up Index (NDBI), wind speed were derived. Finally, a linear regression method in Waikato Environment for Knowledge Analysis (WEKA) was used to build prediction model for revealing LST spatial patterns. Results show that the final apparent surface temperature have uncertainties less than 1 degree Celsius. The comparison between the simulated and actual spatial pattern of LST in 2009 showed that the correlation coefficient is 0.65, mean absolute error (MAE) is 1.24 degree Celsius, and root mean square error (RMSE) is 1.51 degree Celsius of 22,429 pixels.

Rainfall Intensity and Frequency Explain Production Basis Risk in Cumulative Rain Index Insurance

NASA Astrophysics Data System (ADS)

Muneepeerakul, Chitsomanus P.; Muneepeerakul, Rachata; Huffaker, Ray G.

2017-12-01

With minimal moral hazard and adverse selection, weather index insurance promises financial resilience to farmers struck by harsh weather conditions through swift compensation at affordable premium. Despite these advantages, the very nature of indexing gives rise to production basis risk as the selected weather indexes do not sufficiently correspond to actual damages. To address this problem, we develop a stochastic yield model, built upon a stochastic soil moisture model driven by marked Poisson rainfall. Our analysis shows that even under similar temperature and rainfall amount yields can differ significantly; this was empirically supported by a 2-year field experiment in which rain-fed maize was grown under very similar total rainfall. Here, the year with more intense, less-frequent rainfall produces a better yield—a rare counter evidence to most climate change projections. Through a stochastic yield model, we demonstrate the crucial roles of rainfall intensity and frequency in determining the yield. Importantly, the model allows us to compute rainfall pattern-related basis risk inherent in cumulative rain index insurance. The model results and a case study herein clearly show that total rainfall is a poor indicator of yield, imposing unnecessary production basis risk on farmers and false-positive payouts on insurers. Incorporating rainfall intensity and frequency in the design of rain index insurance can offer farmers better protection, while maintaining the attractive features of the weather index insurance and thus fulfilling its promise of financial resilience.

Urbanization on the US landscape: looking ahead in the 21st century.

Treesearch

Ralph J. Alig; Jeffrey D. Kline; Mark Lichtenstein

2004-01-01

Conversion of rural lands to urban and other built-up uses affects the mix of commodities and services produced from the global land base. In the United States, there was a 34% increase in the amount of land devoted to urban and built-up uses between 1982 and 1997. This increase came predominantly from the conversion of croplands and forestland, with the largest...

Urban and built-up land area changes in the United States: an empirical investigation of determinants.

Treesearch

Ralph J. Alig; Robert G. Healy

1987-01-01

Conversion of commodity-producing rural lands to urban and other built-up uses received considerable attention in the professional literature and in the popular press in the early 1980s (U.S. Department of Agriculture and U.S. Council on Environmental Quality 1981 ; Fischel 1982; Raup 1980; Brown, et al. 1982). Although some have concluded that the forces encouraging...

Vegetation diversity protects against childhood asthma: results from a large New Zealand birth cohort

Treesearch

Geoffrey H. Donovan; Demetrios Gatziolis; Ian Longley; Jeroen Douwes

2018-01-01

We assessed the association between the natural environment and asthma in 49,956 New Zealand children born in 1998 and followed up until 2016 using routinely collected data. Children who lived in greener areas, as measured by the normalized difference vegetation index, were less likely to be asthmatic: a 1 s.d. increase in normalized difference vegetation index was...

Computational modeling of in vitro biological responses on polymethacrylate surfaces

PubMed Central

Ghosh, Jayeeta; Lewitus, Dan Y; Chandra, Prafulla; Joy, Abraham; Bushman, Jared; Knight, Doyle; Kohn, Joachim

2011-01-01

The objective of this research was to examine the capabilities of QSPR (Quantitative Structure Property Relationship) modeling to predict specific biological responses (fibrinogen adsorption, cell attachment and cell proliferation index) on thin films of different polymethacrylates. Using 33 commercially available monomers it is theoretically possible to construct a library of over 40,000 distinct polymer compositions. A subset of these polymers were synthesized and solvent cast surfaces were prepared in 96 well plates for the measurement of fibrinogen adsorption. NIH 3T3 cell attachment and proliferation index were measured on spin coated thin films of these polymers. Based on the experimental results of these polymers, separate models were built for homo-, co-, and terpolymers in the library with good correlation between experiment and predicted values. The ability to predict biological responses by simple QSPR models for large numbers of polymers has important implications in designing biomaterials for specific biological or medical applications. PMID:21779132

Design of Amphoteric Refraction Models Using WAVICA and RAYICA

NASA Technical Reports Server (NTRS)

Su, Richard

2004-01-01

The phenomenon of refraction of light is due to refractive index mismatches in two different media. However, to achieve this effect, a finite reflection loss is inevitable. A recent finding presented a unique type of interface, ferroelastic materials, that enables refraction without any reflection for either an electron or a light beam. This property is called total refraction. The same type of interface that yields total refraction can also yield amphoteric refraction, where the index of refraction can be either positive or negative depending on the incident angle. This interface could potentially be used to steer light without reflections which could have major applications in high power optics. My goal this summer is to first familiarize myself with the Mathematica software, especially the Wavica and Rayica packages. I will then model the amphoteric refraction by either modifying the Wavica and Rayica packages or using the built-in functions in these packages.

Observations on Complexity and Costs for Over Three Decades of Communications Satellites

NASA Astrophysics Data System (ADS)

Bearden, David A.

2002-01-01

This paper takes an objective look at approximately thirty communications satellites built over three decades using a complexity index as an economic model. The complexity index is derived from a number of technical parameters including dry mass, end-of-life- power, payload type, communication bands, spacecraft lifetime, and attitude control approach. Complexity is then plotted versus total satellite cost and development time (defined as contract start to first launch). A comparison of the relative cost and development time for various classes of communications satellites and conclusions regarding dependence on system complexity are presented. Observations regarding inherent differences between commercially acquired systems and those procured by government organizations are also presented. A process is described where a new communications system in the formative stage may be compared against similarly "complex" missions of the recent past to balance risk within allotted time and funds. 1

Assessing the effects of land use spatial structure on urban heat islands using HJ-1B remote sensing imagery in Wuhan, China

NASA Astrophysics Data System (ADS)

Wu, Hao; Ye, Lu-Ping; Shi, Wen-Zhong; Clarke, Keith C.

2014-10-01

Urban heat islands (UHIs) have attracted attention around the world because they profoundly affect biological diversity and human life. Assessing the effects of the spatial structure of land use on UHIs is essential to better understanding and improving the ecological consequences of urbanization. This paper presents the radius fractal dimension to quantify the spatial variation of different land use types around the hot centers. By integrating remote sensing images from the newly launched HJ-1B satellite system, vegetation indexes, landscape metrics and fractal dimension, the effects of land use patterns on the urban thermal environment in Wuhan were comprehensively explored. The vegetation indexes and landscape metrics of the HJ-1B and other remote sensing satellites were compared and analyzed to validate the performance of the HJ-1B. The results have showed that land surface temperature (LST) is negatively related to only positive normalized difference vegetation index (NDVI) but to Fv across the entire range of values, which indicates that fractional vegetation (Fv) is an appropriate predictor of LST more than NDVI in forest areas. Furthermore, the mean LST is highly correlated with four class-based metrics and three landscape-based metrics, which suggests that the landscape composition and the spatial configuration both influence UHIs. All of them demonstrate that the HJ-1B satellite has a comparable capacity for UHI studies as other commonly used remote sensing satellites. The results of the fractal analysis show that the density of built-up areas sharply decreases from the hot centers to the edges of these areas, while the densities of water, forest and cropland increase. These relationships reveal that water, like forest and cropland, has a significant effect in mitigating UHIs in Wuhan due to its large spatial extent and homogeneous spatial distribution. These findings not only confirm the applicability and effectiveness of the HJ-1B satellite system for studying UHIs but also reveal the impacts of the spatial structure of land use on UHIs, which is helpful for improving the planning and management of the urban environment.

The anesthetic action of some polyhalogenated ethers-Monte Carlo method based QSAR study.

PubMed

Golubović, Mlađan; Lazarević, Milan; Zlatanović, Dragan; Krtinić, Dane; Stoičkov, Viktor; Mladenović, Bojan; Milić, Dragan J; Sokolović, Dušan; Veselinović, Aleksandar M

2018-04-13

Up to this date, there has been an ongoing debate about the mode of action of general anesthetics, which have postulated many biological sites as targets for their action. However, postoperative nausea and vomiting are common problems in which inhalational agents may have a role in their development. When a mode of action is unknown, QSAR modelling is essential in drug development. To investigate the aspects of their anesthetic, QSAR models based on the Monte Carlo method were developed for a set of polyhalogenated ethers. Until now, their anesthetic action has not been completely defined, although some hypotheses have been suggested. Therefore, a QSAR model should be developed on molecular fragments that contribute to anesthetic action. QSAR models were built on the basis of optimal molecular descriptors based on the SMILES notation and local graph invariants, whereas the Monte Carlo optimization method with three random splits into the training and test set was applied for model development. Different methods, including novel Index of ideality correlation, were applied for the determination of the robustness of the model and its predictive potential. The Monte Carlo optimization process was capable of being an efficient in silico tool for building up a robust model of good statistical quality. Molecular fragments which have both positive and negative influence on anesthetic action were determined. The presented study can be useful in the search for novel anesthetics. Copyright © 2018 Elsevier Ltd. All rights reserved.

Additive Interaction between Heterogeneous Environmental Quality Domains (Air, Water, Land, Sociodemographic, and Built Environment) on Preterm Birth.

PubMed

Grabich, Shannon C; Rappazzo, Kristen M; Gray, Christine L; Jagai, Jyotsna S; Jian, Yun; Messer, Lynne C; Lobdell, Danelle T

2016-01-01

Environmental exposures often occur in tandem; however, epidemiological research often focuses on singular exposures. Statistical interactions among broad, well-characterized environmental domains have not yet been evaluated in association with health. We address this gap by conducting a county-level cross-sectional analysis of interactions between Environmental Quality Index (EQI) domain indices on preterm birth in the Unites States from 2000 to 2005. The EQI, a county-level index constructed for the 2000-2005 time period, was constructed from five domain-specific indices (air, water, land, built, and sociodemographic) using principal component analyses. County-level preterm birth rates ( n  = 3141) were estimated using live births from the National Center for Health Statistics. Linear regression was used to estimate prevalence differences (PDs) and 95% confidence intervals (CIs) comparing worse environmental quality to the better quality for each model for (a) each individual domain main effect, (b) the interaction contrast, and (c) the two main effects plus interaction effect (i.e., the "net effect") to show departure from additivity for the all U.S. counties. Analyses were also performed for subgroupings by four urban/rural strata. We found the suggestion of antagonistic interactions but no synergism, along with several purely additive (i.e., no interaction) associations. In the non-stratified model, we observed antagonistic interactions, between the sociodemographic/air domains [net effect (i.e., the association, including main effects and interaction effects) PD: -0.004 (95% CI: -0.007, 0.000), interaction contrast: -0.013 (95% CI: -0.020, -0.007)] and built/air domains [net effect PD: 0.008 (95% CI 0.004, 0.011), interaction contrast: -0.008 (95% CI: -0.015, -0.002)]. Most interactions were between the air domain and other respective domains. Interactions differed by urbanicity, with more interactions observed in non-metropolitan regions. Observed antagonistic associations may indicate that those living in areas with multiple detrimental domains may have other interfering factors reducing the burden of environmental exposure. This study is the first to explore interactions across different environmental domains and demonstrates the utility of the EQI to examine the relationship between environmental domain interactions and human health. While we did observe some departures from additivity, many observed effects were additive. This study demonstrated that interactions between environmental domains should be considered in future analyses.

Spatial heterogeneity and temporal evolution of malaria transmission risk in Dakar, Senegal, according to remotely sensed environmental data.

PubMed

Machault, Vanessa; Vignolles, Cécile; Pagès, Frédéric; Gadiaga, Libasse; Gaye, Abdoulaye; Sokhna, Cheikh; Trape, Jean-François; Lacaux, Jean-Pierre; Rogier, Christophe

2010-09-03

The United Nations forecasts that by 2050, more than 60% of the African population will live in cities. Thus, urban malaria is considered an important emerging health problem in that continent. Remote sensing (RS) and geographic information systems (GIS) are useful tools for addressing the challenge of assessing, understanding and spatially focusing malaria control activities. The objectives of the present study were to use high spatial resolution SPOT (Satellite Pour l'Observation de la Terre) satellite images to identify some urban environmental factors in Dakar associated with Anopheles arabiensis densities, to assess the persistence of these associations and to describe spatial changes in at-risk environments using a decadal time scale. Two SPOT images from the 1996 and 2007 rainy seasons in Dakar were processed to extract environmental factors, using supervised classification of land use and land cover, and a calculation of NDVI (Normalized Difference Vegetation Index) and distance to vegetation. Linear regressions were fitted to identify the ecological factors associated with An. arabiensis aggressiveness measured in 1994-97 in the South and centre districts of Dakar. Risk maps for populated areas were computed and compared for 1996 and 2007 using the results of the statistical models. Almost 60% of the variability in anopheline aggressiveness measured in 1994-97 was explained with only one variable: the built-up area in a 300-m radius buffer around the catching points. This association remained stable between 1996 and 2007. Risk maps were drawn by inverting the statistical association. The total increase of the built-up areas in Dakar was about 30% between 1996 and 2007. In proportion to the total population of the city, the population at high risk for malaria fell from 32% to 20%, whereas the low-risk population rose from 29 to 41%. Environmental data retrieved from high spatial resolution SPOT satellite images were associated with An. arabiensis densities in Dakar urban setting, which allowed to generate malaria transmission risk maps. The evolution of the risk was quantified, and the results indicated there are benefits of urbanization in Dakar, since the proportion of the low risk population increased while urbanization progressed.

Impacts of urban sprawl on the area of downtown lakes in a highly developing city on central China

NASA Astrophysics Data System (ADS)

Zhang, W.; Zhang, Y.

2016-12-01

Wuhan city in central China is full of water resources and numerous lakes are located. Downtown lakes have significant ecological value and ornamental value for urban inhabitants in Wuhan. Under the rapid process of urban sprawl, downtown lakes are occupied by impervious areas. This research uses Landsat images to extract land uses from 1991 to 2013 in Wuhan city , and attempts to find out how urban sprawl affects the water body area decline in space. Two largest downtown lakes in Wuhan city, Donghu Lake located in central city and Tangxunhu Lake located in suburbs, are taken as case study area. A direction change index (DCI) is proposed to evaluate the changes of a specific land use in different directions. The results reveal that two downtown lakes are undergoing rapid water body area decline from 1991 to 2013, with decline rate are -0.022 in Donghu watershed and -0.011 in Tangxunhu watershed. 68.26% and 62.50% of the reduced water body is occupied by built-up land in Donghu watershed and Tangxunhu watershed, respectively. According to DCI, the water body reduce is highly correlated with built-up land increase in all direction. Moreover, it is found that in the Donghu watershed the north-west part suffered significant water body area decline, which is close to central city. While in Tangxunhu watershed, the area of water body declined in north-west, south-west and north-east part, and the area obstructed from central city by the lake was suffering less water body area decline. It is concluded that the water body area of downtown lakes are highly affected by the process of urban sprawl, and the lakes in central districts trends to suffer higher descend than that of the downtown lake located in suburbs. Meanwhile, even for the same downtown lake, the area orientating and close to the central city may suffer more rapid decline than the area that does not orientate to the central city.

The Dynamics of Population, Built-up Areas and their Evolving Associations in Gridded Population across Time and Space

NASA Astrophysics Data System (ADS)

Stevens, F. R.; Gaughan, A. E.; Tatem, A. J.; Linard, C.; Sorichetta, A.; Nieves, J. J.; Reed, P.

2017-12-01

Gridded population data is commonly used to understand the `now' of hazard risk and mitigation management, health and disease modelling, and global change-, economic-, environmental-, and sustainability-related research. But to understand how human population change at local to global scales influences and is influenced by environmental changes requires novel ways of treating data and statistically describing associations of measured population counts with associated covariates. One of the most critical components in such gridded estimates is the relationship between built-up areas and population located in these areas. This relationship is rarely static and accurately estimating changes in built-areas through time and the changing human population around them is critical when applying gridded population datasets in studies of other environmental change. The research presented here discusses these issues in the context of multitemporal, gridded population data, using new technologies and sources of remotely-sensed and modeled built-up areas. We discuss applications of these data in environmental analyses and intercomparisons with other such data across scales.

Can preoperative detrusor underactivity influence surgical outcomes of 120 W HPS vaporization of the prostate (PVP) or holmium laser enucleation of the prostate (HoLEP)? A serial 3-year follow-up study.

PubMed

Cho, Min Chul; Park, Juhyun; Kim, Jung Kwon; Cho, Sung Yong; Jeong, Hyeon; Oh, Seung-June; Paick, Jae-Seung; Son, Hwancheol

2018-01-01

To determine the influence of preoperative detrusor underactivity (DU) on serial long-term outcomes of HPS/PVP or HoLEP for LUTS/BPH, and to compare the influence between the two surgeries. A total of 382 men, who underwent 120W-HPS/PVP or HoLEP for LUTS/BPH and for whom 36-month follow-up data were available, were classified into four groups: HPS with DU (n = 145), HPS without DU (n = 44), HoLEP with DU (n = 105), and HoLEP without DU (n = 88). DU was defined as bladder contractility index of <100. Surgical outcomes were assessed at postoperative 6, 12, 24, and 36 months using IPSS, uroflowmetry, and serum PSA. All four groups maintained improvements in voiding symptom score (VSS), storage symptom score, total-IPSS, QOL index, maximum flow rate (Qmax), post-void residual urine volume (PVR), and bladder voiding efficiency (BVE) compared with baseline up to 3 years postoperatively. There were no significant differences in improvements of postoperative IPSS parameters including QOL index between men with and without DU throughout the follow-up period after HPS or HoLEP. In men with DU, there were no significant differences in improvements of postoperative QOL index, Qmax, PVR, or BVE between HPS and HoLEP groups throughout the follow-up period, except for VSS and total IPSS. Serum PSA reductions after HoLEP were greater than after PVP. Improvements in LUTS, Qmax, and BVE can maintain up to 3 years after HPS or HoLEP for LUTS/BPH, irrespective of the presence or absence of preoperative DU. Although HoLEP may provide more durable improvement of VS in men with DU than HPS, there seems to be no difference in improvement of QOL or Qmax or BVE between HPS and HoLEP. © 2017 Wiley Periodicals, Inc.

Game analysis and benefit allocation in international projects among owner, supervisor and contractor

NASA Astrophysics Data System (ADS)

Ding, Hao; Wang, Yong; Guo, Sini; Xu, Xiaofeng; Che, Cheng

2016-04-01

International projects are different from general domestic ones. In order to analyse the differences, a tripartite game model is built up to describe the relationship among owner, supervisor and general contractor, and some measures are given for the owner to more effectively complete the project. In addition, a project schedule selection model is formulated and a new benefit allocation method is proposed by introducing a new modified Shapley value with weighted factor.

Impedance measures in analysis and characterization of multistable structures subjected to harmonic excitation

NASA Astrophysics Data System (ADS)

Harne, Ryan L.; Goodpaster, Benjamin A.

2018-01-01

Structural components susceptible to adverse, post-buckled dynamic behaviors have long challenged the success of applications requiring lightweight, slender curved structures, while researchers have begun to leverage such bistable systems in emerging applications for novel energy attenuation and shape-changing properties. To expedite development and deployment of these built-up platforms containing post-buckled constituents, efficient approaches are required to complement time-consuming full-field models in the prediction of the near- and far-from-equilibrium dynamics. This research meets the need by introducing a semi-analytical model framework to enable the characterization of steady-state responses in multi degree-of-freedom (DOF) and multistable structural systems subjected to harmonic excitation. In so doing, the pathway for assessing impedance measures is created here so as to identify how energy travels and returns within built-up multistable structures. Verified by simulations and qualitatively validated by experiments, the analysis is shown to accurately reproduce both near- and far-from-equilibrium responses including different classes of energetic snap-through dynamics that only exist in such multistable structures. A first look at the impedance measures of different dynamic regimes reveals a connection between damping in multistable structures and the sustainability of far-from-equilibrium oscillations.

Distributed Lag Models: Examining Associations between the Built Environment and Health

PubMed Central

Baek, Jonggyu; Sánchez, Brisa N.; Berrocal, Veronica J.; Sanchez-Vaznaugh, Emma V.

2016-01-01

Built environment factors constrain individual level behaviors and choices, and thus are receiving increasing attention to assess their influence on health. Traditional regression methods have been widely used to examine associations between built environment measures and health outcomes, where a fixed, pre-specified spatial scale (e.g., 1 mile buffer) is used to construct environment measures. However, the spatial scale for these associations remains largely unknown and misspecifying it introduces bias. We propose the use of distributed lag models (DLMs) to describe the association between built environment features and health as a function of distance from the locations of interest and circumvent a-priori selection of a spatial scale. Based on simulation studies, we demonstrate that traditional regression models produce associations biased away from the null when there is spatial correlation among the built environment features. Inference based on DLMs is robust under a range of scenarios of the built environment. We use this innovative application of DLMs to examine the association between the availability of convenience stores near California public schools, which may affect children’s dietary choices both through direct access to junk food and exposure to advertisement, and children’s body mass index z-scores (BMIz). PMID:26414942

[Implementation of Oncomelania hupensis monitoring system based on Baidu Map].

PubMed

Zhi-Hua, Chen; Yi-Sheng, Zhu; Zhi-Qiang, Xue; Xue-Bing, Li; Yi-Min, Ding; Li-Jun, Bi; Kai-Min, Gao; You, Zhang

2017-10-25

To construct the Oncomelania hupensis snail monitoring system based on the Baidu Map. The environmental basic information about historical snail environment and existing snail environment, etc. was collected with the monitoring data about different kinds of O. hupensis snails, and then the O. hupensis snail monitoring system was built. Geographic Information System (GIS) and the electronic fence technology and Application Program Interface (API) were applied to set up the electronic fence of the snail surveillance environments, and the electronic fence was connected to the database of the snail surveillance. The O. hupensis snail monitoring system based on the Baidu Map were built up, including three modules of O. hupensis Snail Monitoring Environmental Database, Dynamic Monitoring Platform and Electronic Map. The information about monitoring O. hupensis snails could be obtained through the computer and smartphone simultaneously. The O. hupensis snail monitoring system, which is based on Baidu Map, is a visible platform to follow the process of snailsearching and molluscaciding.

Controlled simulation of optical turbulence in a temperature gradient air chamber

NASA Astrophysics Data System (ADS)

Toselli, Italo; Wang, Fei; Korotkova, Olga

2016-05-01

Atmospheric turbulence simulator is built and characterized for in-lab optical wave propagation with controlled strength of the refractive-index fluctuations. The temperature gradients are generated by a sequence of heat guns with controlled individual strengths. The temperature structure functions are measured in two directions transverse to propagation path with the help of a thermocouple array and used for evaluation of the corresponding refractive-index structure functions of optical turbulence.

Age-related decline in bottom-up processing and selective attention in the very old.

PubMed

Zhuravleva, Tatyana Y; Alperin, Brittany R; Haring, Anna E; Rentz, Dorene M; Holcomb, Philip J; Daffner, Kirk R

2014-06-01

Previous research demonstrating age-related deficits in selective attention have not included old-old adults, an increasingly important group to study. The current investigation compared event-related potentials in 15 young-old (65-79 years old) and 23 old-old (80-99 years old) subjects during a color-selective attention task. Subjects responded to target letters in a specified color (Attend) while ignoring letters in a different color (Ignore) under both low and high loads. There were no group differences in visual acuity, accuracy, reaction time, or latency of early event-related potential components. The old-old group showed a disruption in bottom-up processing, indexed by a substantially diminished posterior N1 (smaller amplitude). They also demonstrated markedly decreased modulation of bottom-up processing based on selected visual features, indexed by the posterior selection negativity (SN), with similar attenuation under both loads. In contrast, there were no group differences in frontally mediated attentional selection, measured by the anterior selection positivity (SP). There was a robust inverse relationship between the size of the SN and SP (the smaller the SN, the larger the SP), which may represent an anteriorly supported compensatory mechanism. In the absence of a decline in top-down modulation indexed by the SP, the diminished SN may reflect age-related degradation of early bottom-up visual processing in old-old adults.

Strain dependence of perfluorinated polymer optical fiber Bragg grating measured at different wavelengths

NASA Astrophysics Data System (ADS)

Ishikawa, Ryo; Lee, Heeyoung; Lacraz, Amédée; Theodosiou, Antreas; Kalli, Kyriacos; Mizuno, Yosuke; Nakamura, Kentaro

2018-03-01

We measure the strain dependence of multiple Bragg wavelengths (corresponding to different diffraction orders) of a fiber Bragg grating (FBG) inscribed in a perfluorinated graded-index polymer optical fiber (PFGI-POF) in the wavelength range up to 1550 nm. On the basis of this result, we show that the fractional sensitivity, which has been conventionally used as a wavelength-independent index for fair comparison of the FBG performance measured at different wavelengths, is dependent on wavelength in this range. The reason for this behavior seems to originate from the non-negligible wavelength dependence of refractive index and its strain-dependence coefficient. Using the wavelength dependence of the refractive index already reported for bulk, we deduce the wavelength dependence of the strain coefficient of the refractive index. This information will be a useful archive in implementing PFGI-POF-based strain sensors based on not only FBGs but also Brillouin scattering in the future.

Analysis of the effect of local heat island in Seoul using LANDSAT image

NASA Astrophysics Data System (ADS)

Lee, K. I.; Ryu, J.; Jeon, S. W.

2017-12-01

The increase in the rate of industrialization due to urbanization has caused the Urban Heat Island phenomenon which means that the temperature of the city is higher than the surrounding area, and its intensity is increasing with climate change. Among the cities where heat island phenomenon occur, Seoul city has different degree of urbanization, green area ratio, energy consumption, and population density by each district unit. As a result, the strength of heat island phenomenon is also different. The average maximum temperature in each region may differ by more than 3 °, which is bigger than the suburbs in Seoul and it means that analysis of UHI effect by regional unit is needed. Therefore, this study is to extract the UHI Intensity of the regional unit of the Seoul Metropolitan City using the satellite image, analyzed the difference of intensity according to the regional unit. And do linear regression analysis with variables included in three categories(regional meteorological conditions, anthropogenic heat generation, land use factors). As a result, The UHI Intensity value of the Gu unit is significantly different from the UHI Intensity distribution of the Dong unit. The variable having the greatest positive correlation with UHI Intensity was NDBI(Normalized Difference Built-up Index) which shows the distribution of urban area, and Urban area ratio also has high correlation. There was a negative correlation between mean wind speed but there was no significant correlation between population density and power consumption. The result of this study is to identify the regional difference of UHI Intensity and to identify the factors inducing heat island phenomenon. so It is expected that it will provide direction in urban thermal environment design and policy development in the future.

ESO's early history, 1953 - 1975. V. Earliest developments in Chile; 24 March 1966: the road on La Silla dedicated.

NASA Astrophysics Data System (ADS)

Blaauw, A.

1989-12-01

While - as described in the previous article - in Europe Directorate and Council established ESO's administrative basis, and the first telescopes were built or acquired under the guidance of the Instrumentation Committee, work in Chile proceeded equally energetically. Under the leadership of Andre Muller, since January 1, 1964 Superintendent for Chile, a great variety of tasks had to be taken up: building up staff for administration and construction, organizing office facilities, setting up temporary camps as basis for the activities on and around La Silla, learning to know the Chilean world of government and Drovincial authorities-and of contractors, etc. A challenging but demanding assignment! For it is one thing to build up an organization in one's own country with its well-known legal structure and social traditions - but another one to do so in a foreign country with unfamiliar language, different customs and different rules.

Progressive Fracture of Fiber Composite Build-Up Structures

NASA Technical Reports Server (NTRS)

Gotsis, Pascal K.; Chamis, C. C.; Minnetyan, Levon

1997-01-01

Damage progression and fracture of built-up composite structures is evaluated by using computational simulation. The objective is to examine the behavior and response of a stiffened composite (0/ +/- 45/90)(sub s6) laminate panel by simulating the damage initiation, growth, accumulation, progression and propagation to structural collapse. An integrated computer code, CODSTRAN, was augmented for the simulation of the progressive damage and fracture of built-up composite structures under mechanical loading. Results show that damage initiation and progression have significant effect on the structural response. Influence of the type of loading is investigated on the damage initiation, propagation and final fracture of the build-up composite panel.

Progressive Fracture of Fiber Composite Build-Up Structures

NASA Technical Reports Server (NTRS)

Minnetyan, Levon; Gotsis, Pascal K.; Chamis, C. C.

1997-01-01

Damage progression and fracture of built-up composite structures is evaluated by using computational simulation. The objective is to examine the behavior and response of a stiffened composite (0 +/-45/90)(sub s6) laminate panel by simulating the damage initiation, growth, accumulation, progression and propagation to structural collapse. An integrated computer code CODSTRAN was augmented for the simulation of the progressive damage and fracture of built-up composite structures under mechanical loading. Results show that damage initiation and progression to have significant effect on the structural response. Influence of the type of loading is investigated on the damage initiation, propagation and final fracture of the build-up composite panel.

[The preliminary assessment in the B-BS protocol as a tool for the discovery of job stress symptoms and contingencies: a method under experimentation by INAIL].

PubMed

Clerici, P; Guercio, A

2010-01-01

The proposed model is aimed at assessing work-related stress and consists of a preliminary phase during which the Organization is monitored, Indexes and stressors are defined, characterized and then weighted; existing symptoms (if any) are also identified. A 'Probability vs. Severity' Matrix is then built up as a result: these tasks can profitably be performed by a technical professional, typically the Responsible of the Safety and Health Committee. According to found evidences, a second phase, strictly based upon the application of psychosocial research tools, might be needed to investigate group of workers that resulted troublesome during the preliminary phase. The preliminary phase of investigation on organizational stressors and indexes can be easily and successfully integrated with the 'Safety Assessment' steps provided for the B-BS protocol, also aimed at monitoring the organizational wellbeing and consequently acting on the workers' behavior. The model has been specifically designed for Small and Medium Enterprises, with the global objective of preventing accidents at work due to misbehavior and distraction, by correctly and safely applying operational procedures and mutual relationships.

Walkability Index

EPA Pesticide Factsheets

The Walkability Index dataset characterizes every Census 2010 block group in the U.S. based on its relative walkability. Walkability depends upon characteristics of the built environment that influence the likelihood of walking being used as a mode of travel. The Walkability Index is based on the EPA's previous data product, the Smart Location Database (SLD). Block group data from the SLD was the only input into the Walkability Index, and consisted of four variables from the SLD weighted in a formula to create the new Walkability Index. This dataset shares the SLD's block group boundary definitions from Census 2010. The methodology describing the process of creating the Walkability Index can be found in the documents located at ftp://newftp.epa.gov/EPADataCommons/OP/WalkabilityIndex.zip. You can also learn more about the Smart Location Database at https://edg.epa.gov/data/Public/OP/Smart_Location_DB_v02b.zip.

Applying Agrep to r-NSA to solve multiple sequences approximate matching.

PubMed

Ni, Bing; Wong, Man-Hon; Lam, Chi-Fai David; Leung, Kwong-Sak

2014-01-01

This paper addresses the approximate matching problem in a database consisting of multiple DNA sequences, where the proposed approach applies Agrep to a new truncated suffix array, r-NSA. The construction time of the structure is linear to the database size, and the computations of indexing a substring in the structure are constant. The number of characters processed in applying Agrep is analysed theoretically, and the theoretical upper-bound can approximate closely the empirical number of characters, which is obtained through enumerating the characters in the actual structure built. Experiments are carried out using (synthetic) random DNA sequences, as well as (real) genome sequences including Hepatitis-B Virus and X-chromosome. Experimental results show that, compared to the straight-forward approach that applies Agrep to multiple sequences individually, the proposed approach solves the matching problem in much shorter time. The speed-up of our approach depends on the sequence patterns, and for highly similar homologous genome sequences, which are the common cases in real-life genomes, it can be up to several orders of magnitude.

Monitoring Urbanization Processes from Space: Using Landsat Imagery to Detect Built-Up Areas at Scale

NASA Astrophysics Data System (ADS)

Goldblatt, R.; You, W.; Hanson, G.; Khandelwal, A. K.

2016-12-01

Urbanization is one of the most fundamental trends of the past two centuries and a key force shaping almost all dimensions of modern society. Monitoring the spatial extent of cities and their dynamics be means of remote sensing methods is crucial for many research domains, as well as to city and regional planning and to policy making. Yet the majority of urban research is being done in small scales, due, in part, to computational limitation. With the increasing availability of parallel computing platforms with large storage capacities, such as Google Earth Engine (GEE), researchers can scale up the spatial and the temporal units of analysis and investigate urbanization processes over larger areas and over longer periods of time. In this study we present a methodology that is designed to capture temporal changes in the spatial extent of urban areas at the national level. We utilize a large scale ground-truth dataset containing examples of "built-up" and "not built-up" areas from across India. This dataset, which was collected based on 2016 high-resolution imagery, is used for supervised pixel-based image classification in GEE. We assess different types of classifiers and inputs and demonstrate that with Landsat 8 as the classifier`s input, Random Forest achieves a high accuracy rate of around 87%. Although performance with Landsat 8 as the input exceeds that of Landsat 7, with the addition of several per-pixel computed indices to Landsat 7 - NDVI, NDBI, MNDWI and SAVI - the classifier`s sensitivity improves by around 10%. We use Landsat 7 to detect temporal changes in the extent of urban areas. The classifier is trained with 2016 imagery as the input - for which ground truth data is available - and is used the to detect urban areas over the historical imagery. We demonstrate that this classification produces high quality maps of urban extent over time. We compare the classification result with numerous datasets of urban areas (e.g. MODIS, DMSP-OLS and WorldPop) and show that our classification captures the fine boundaries between built-up areas and various types of land cover thus providing an accurate estimation of the extent of urban areas. The study demonstrates the potential of cloud-based platforms, such as GEE, for monitoring long-term and continuous urbanization processes at scale.

Analysis of Discrete-Source Damage Progression in a Tensile Stiffened Composite Panel

NASA Technical Reports Server (NTRS)

Wang, John T.; Lotts, Christine G.; Sleight, David W.

1999-01-01

This paper demonstrates the progressive failure analysis capability in NASA Langley s COMET-AR finite element analysis code on a large-scale built-up composite structure. A large-scale five stringer composite panel with a 7-in. long discrete source damage was analyzed from initial loading to final failure including the geometric and material nonlinearities. Predictions using different mesh sizes, different saw cut modeling approaches, and different failure criteria were performed and assessed. All failure predictions have a reasonably good correlation with the test result.

Comparison of anthropometric indices for predicting the risk of metabolic syndrome and its components in Chinese adults: a prospective, longitudinal study

PubMed Central

Wang, Haoyu; Liu, Aihua; Zhao, Tong; Gong, Xun; Pang, Tianxiao; Zhou, Yingying; Xiao, Yue; Yan, Yumeng; Fan, Chenling; Teng, Weiping; Lai, Yaxin; Shan, Zhongyan

2017-01-01

Objectives Our study aimed to distinguish the ability of anthropometric indices to assess the risk of metabolic syndrome (MetS). Design Prospective cohort study. Setting Shenyang, China. Participants A total of 379 residents aged between 40 and 65 were enrolled. 253 of them were free of MetS and had been followed up for 4.5 years. Methods At baseline, all the participants underwent a thorough medical examination. A variety of anthropometric parameters were measured and calculated, including waist circumference (WC), body mass index (BMI), a body shape index (ABSI), abdominal volume index (AVI), body adiposity index, body roundness index, conicity index, waist-to-hip ratio and visceral adiposity index (VAI). After 4.5 year follow-up, we re-examined whether participants were suffering from MetS. A receiver operating characteristic (ROC) curve was applied to examine the potential of the above indices to identify the status and risk of MetS. Outcomes Occurrence of MetS. Results At baseline, 33.2% participants suffered from MetS. All of the anthropometric indices showed clinical significance, and VAI was superior to the other indices as it was found to have the largest area under the ROC curve. After a 4.5 year follow-up, 37.8% of men and 23.9% of women developed MetS. ROC curve analysis suggested that baseline BMI was the strongest predictor of MetS for men (0.77 (0.68–0.85)), and AVI was the strongest for women (0.72 (0.64–0.79)). However, no significant difference was observed between WC and both indices. In contrast, the baseline ABSI did not predict MetS in both genders. Conclusions The present study indicated that these different indices derived from anthropometric parameters have different discriminatory abilities for MetS. Although WC did not have the largest area under the ROC curve for diagnosing and predicting MetS, it may remain a better index of MetS status and risk because of its simplicity and wide use. PMID:28928179

Determining the reliability of a custom built seated stadiometry set-up for measuring spinal height in participants with chronic low back pain.

PubMed

Steele, James; Bruce-Low, Stewart; Smith, Dave; Jessop, David; Osborne, Neil

2016-03-01

Indirect measurement of disc hydration can be obtained through measures of spinal height using stadiometry. However, specialised stadiometers for this are often custom-built and expensive. Generic wall-mounted stadiometers alternatively are common in clinics and laboratories. This study examined the reliability of a custom set-up utilising a wall-mounted stadiometer for measurement of spinal height using custom built wall mounted postural rods. Twelve participants with non-specific chronic low back pain (CLBP; females n = 5, males n = 7) underwent measurement of spinal height on three separate consecutive days at the same time of day where 10 measurements were taken at 20 s intervals. Comparisons were made using repeated measures analysis of variance for 'trial' and 'gender'. There were no significant effects by trial or interaction effects of trial x gender. Intra-individual absolute standard error of measurement (SEM) was calculated for spinal height using the first of the 10 measures, the average of 10 measures, the total shrinkage, and the rate of shrinkage across the 10 measures examined as the slope of the curve when a linear regression was fitted. SEMs were 3.1 mm, 2.8 mm, 2.6 mm and 0.212, respectively. Absence of significant differences between trials and the reported SEMs suggests this custom set-up for measuring spinal height changes is suitable use as an outcome measure in either research or clinical practice in participants with CLBP. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Validation of Sleep-Tracking Technology Compared with Polysomnography in Adolescents.

PubMed

de Zambotti, Massimiliano; Baker, Fiona C; Colrain, Ian M

2015-09-01

To evaluate the accuracy in measuring nighttime sleep of a fitness tracker (Jawbone UP) compared to polysomnography (PSG). Jawbone UP and PSG data were simultaneously collected from adolescents during an overnight laboratory recording. Agreements between Jawbone UP and PSG sleep outcomes were analyzed using paired t tests and Bland-Altman plots. Multiple regressions were used to investigate which PSG sleep measures predicted Jawbone UP "Sound sleep" and "Light sleep." SRI International Human Sleep Laboratory. Sixty-five healthy adolescents (28 females, mean age ± standard deviation [SD]: 15.8 ± 2.5 y). N/A. Outcomes showed good agreements between Jawbone UP and PSG for total sleep time (mean differences ± SD: -10.0 ± 20.5 min), sleep efficiency (mean differences ± SD: -1.9 ± 4.2 %), and wake after sleep onset (WASO) (mean differences ± SD: 10.6 ± 14.7 min). Overall, Jawbone UP overestimated PSG total sleep time and sleep efficiency and underestimated WASO but differences were small and, on average, did not exceed clinically meaningful cutoffs of > 30 min for total sleep time and > 5% for sleep efficiency. Multiple regression models showed that Jawbone UP "Sound sleep" measure was predicted by PSG time in N2 (β = 0.25), time in rapid eye movement (β = 0.29), and arousal index (β = -0.34). Jawbone UP "Light sleep" measure was predicted by PSG time in N2 (β = 0.48), time in N3 (β = 0.49), arousal index (β = 0.38) and awakening index (β = 0.28). Jawbone UP showed a progression from slight overestimation to underestimation of total sleep time and sleep efficiency with advancing age. All relationships were similar in boys and girls. Jawbone UP shows good agreement with polysomnography in measures of total sleep time and wake after sleep onset in adolescent boys and girls. Further validation is needed in other age groups and clinical populations before advocating use of these inexpensive and easy-to-use devices in clinical sleep medicine and research. © 2015 Associated Professional Sleep Societies, LLC.

Temperature independent refractive index measurement using a fiber Bragg grating on abrupt tapered tip

NASA Astrophysics Data System (ADS)

Gomes, André D.; Silveira, Beatriz; Warren-Smith, Stephen C.; Becker, Martin; Rothhardt, Manfred; Frazão, Orlando

2018-05-01

A fiber Bragg grating was inscribed in an abrupt fiber taper using a femtosecond laser and phase-mask interferometer. The abrupt taper transition allows to excite a broad range of guided modes with different effective refractive indices that are reflected at different wavelengths according to Bragg's law. The multimode-Bragg reflection expands over 30 nm in the telecom-C-band. This corresponds to a mode-field overlap of up to 30% outside of the fiber, making the device suitable for evanescent field sensing. Refractive index and temperature measurements are performed for different reflection peaks. Temperature independent refractive index measurements are achieved by considering the difference between the wavelength shifts of two measured reflection peaks. A minimum refractive index sensitivity of 16 ± 1 nm/RIU was obtained in a low refractive index regime (1.3475-1.3720) with low influence of temperature (-0.32 ± 0.06 pm/°C). The cross sensitivity for this structure is 2.0 × 10-5 RIU/°C. The potential for simultaneous measurement of refractive index and temperature is also studied.

Effectiveness of community-based rehabilitation after traumatic brain injury for 489 program completers compared with those precipitously discharged.

PubMed

Altman, Irwin M; Swick, Shannon; Parrot, Devan; Malec, James F

2010-11-01

To evaluate outcomes of home- and community-based postacute brain injury rehabilitation (PABIR). Retrospective analysis of program evaluation data for treatment completers and noncompleters. Home- and community-based PABIR conducted in 7 geographically distinct U.S. cities. Patients (N=489) with traumatic brain injury who completed the prescribed course of rehabilitation (completed-course-of-treatment [CCT] group) compared with 114 who were discharged precipitously before program completion (precipitous-discharge [PD] group). PABIR delivered in home and community settings by certified professional staff on an individualized basis. Mayo-Portland Adaptability Inventory (MPAI-4) completed by means of professional consensus on admission and at discharge; MPAI-4 Participation Index at 3- and 12-month follow-up through telephone contact. Analysis of covariance (CCT vs PD group as between-subjects variable, admission MPAI-4 score as covariate) showed significant differences between groups at discharge on the full MPAI-4 (F=82.25; P<.001), Ability Index (F=50.24; P<.001), Adjustment Index (F=81.20; P<.001), and Participation Index (F=59.48; P<.001). A large portion of the sample was lost to follow-up; however, available data showed that group differences remained statistically significant at follow-up. Results provided evidence of the effectiveness of home- and community-based PABIR and that treatment effects were maintained at follow-up. Copyright © 2010 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

[A new machinability test machine and the machinability of composite resins for core built-up].

PubMed

Iwasaki, N

2001-06-01

A new machinability test machine especially for dental materials was contrived. The purpose of this study was to evaluate the effects of grinding conditions on machinability of core built-up resins using this machine, and to confirm the relationship between machinability and other properties of composite resins. The experimental machinability test machine consisted of a dental air-turbine handpiece, a control weight unit, a driving unit of the stage fixing the test specimen, and so on. The machinability was evaluated as the change in volume after grinding using a diamond point. Five kinds of core built-up resins and human teeth were used in this study. The machinabilities of these composite resins increased with an increasing load during grinding, and decreased with repeated grinding. There was no obvious correlation between the machinability and Vickers' hardness; however, a negative correlation was observed between machinability and scratch width.

Research on Comprehensive Evaluation Method for Heating Project Based on Analytic Hierarchy Processing

NASA Astrophysics Data System (ADS)

Han, Shenchao; Yang, Yanchun; Liu, Yude; Zhang, Peng; Li, Siwei

2018-01-01

It is effective to reduce haze in winter by changing the distributed heat supply system. Thus, the studies on comprehensive index system and scientific evaluation method of distributed heat supply project are essential. Firstly, research the influence factors of heating modes, and an index system with multiple dimension including economic, environmental, risk and flexibility was built and all indexes were quantified. Secondly, a comprehensive evaluation method based on AHP was put forward to analyze the proposed multiple and comprehensive index system. Lastly, the case study suggested that supplying heat with electricity has great advantage and promotional value. The comprehensive index system of distributed heating supply project and evaluation method in this paper can evaluate distributed heat supply project effectively and provide scientific support for choosing the distributed heating project.

The Examination of Listening Anxiety Level of the Students Who Learn Turkish as a Foreign Language

ERIC Educational Resources Information Center

Halat, Sercan; Özbay, Murat

2018-01-01

In 21st century which witnesses a range of extraordinary technological improvements; along with the world's turning into global-village-like place, it is a vital need that a common communication network being built up as a result of the interaction among the people whose nation, culture, language and beliefs differ drastically. With the aim of…

Assessment of the Broadleaf Crops Leaf Area Index Product from the Terra MODIS Instrument

NASA Technical Reports Server (NTRS)

Tan, Bin; Hu, Jiannan; Huang, Dong; Yang, Wenze; Zhang, Ping; Shabanov, Nikolay V.; Knyazikhin, Yuri; Nemani, Ramakrishna R.; Myneni, Ranga B.

2005-01-01

The first significant processing of Terra MODIS data, called Collection 3, covered the period from November 2000 to December 2002. The Collection 3 leaf area index (LAI) and fraction vegetation absorbed photosynthetically active radiation (FPAR) products for broadleaf crops exhibited three anomalies (a) high LAI values during the peak growing season, (b) differences in LAI seasonality between the radiative transfer-based main algorithm and the vegetation index based back-up algorithm, and (c) too few retrievals from the main algorithm during the summer period when the crops are at full flush. The cause of these anomalies is a mismatch between reflectances modeled by the algorithm and MODIS measurements. Therefore, the Look-Up-Tables accompanying the algorithm were revised and implemented in Collection 4 processing. The main algorithm with the revised Look-Up-Tables generated retrievals for over 80% of the pixels with valid data. Retrievals from the back-up algorithm, although few, should be used with caution as they are generated from surface reflectances with high uncertainties.

Optimal design of a novel remote center-of-motion mechanism for minimally invasive surgical robot

NASA Astrophysics Data System (ADS)

Sun, Jingyuan; Yan, Zhiyuan; Du, Zhijiang

2017-06-01

Surgical robot with a remote center-of-motion (RCM) plays an important role in minimally invasive surgery (MIS) field. To make the mechanism has high flexibility and meet the demand of movements during processing of operation, an optimized RCM mechanism is proposed in this paper. Then, the kinematic performance and workspace are analyzed. Finally, a new optimization objective function is built by using the condition number index and the workspace index.

Tunnel formation by Reticulitermes flavipes and Coptotermes formosanus (Isoptera: Rhinotermitidae) in response to wood in sand.

PubMed

Puche, H; Su, N Y

2001-12-01

The tunneling responses of two subterranean termite species, Coptotermes formosanus Shiraki and Reticulitermes flavipes (Kollar), to the presence of sound wood in laboratory arenas were studied. Branching pattern and the speed of tunnel construction between R. flavipes and C. formosanus also were compared. Patlak's residence index (rho) was generated using the length, width, speed of construction, and area of the primary tunnels built by termites. In the same allotted time, C. formosanus built wider and shorter primary tunnels, whereas R. flavipes built thinner and longer primary tunnels. The presence of wood did not affect termite tunnel formation. This lack of variation in tunnel formation parameters was evidenced by the inability of the termites to locate wood sources over distance, even as short as 2.5 mm, and by the similar tunneling behaviors in areas of the arena with or without wood. Patlak's model predicted the densities of tunnels with an error between 9 and 28%. in experiments with R. flavipes exposed to a range of 0-8,000 g of wood, and between 61 and 87% in experiments with C. formosanus. These results indicated that the residence index can provide a qualitative measure of the effect of habitat heterogeneity on the individual termite tunnels. The tunneling constructions strategy of these subterranean termites is discussed.

Five domains of environmental quality and birth outcomes

EPA Science Inventory

Human health is affected by simultaneous exposure to stressors and amenities, but research employs single exposure models. To address this, we constructed a county-level Environmental Quality Index (EQI) with data representing five environmental domains (air, water, land, built a...

A new model-free index of dynamic cerebral blood flow autoregulation.

PubMed

Chacón, Max; Jara, José Luis; Panerai, Ronney B

2014-01-01

The classic dynamic autoregulatory index (ARI), proposed by Aaslid and Tiecks, is one of the most widely used methods to assess the efficiency of dynamic cerebral autoregulation. Although this index is often used in clinical research and is also included in some commercial equipment, it exhibits considerable intra-subject variability, and has the tendency to produce false positive results in clinical applications. An alternative index of dynamic cerebral autoregulation is proposed, which overcomes most of the limitations of the classic method and also has the advantage of being model-free. This new index uses two parameters that are obtained directly from the response signal of the cerebral blood flow velocity to a transient decrease in arterial blood pressure provoked by the sudden release of bilateral thigh cuffs, and a third parameter measuring the difference in slope of this response and the change in arterial blood pressure achieved. With the values of these parameters, a corresponding classic autoregulatory index value could be calculated by using a linear regression model built from theoretical curves generated with the Aaslid-Tiecks model. In 16 healthy subjects who underwent repeated thigh-cuff manoeuvres, the model-free approach exhibited significantly lower intra-subject variability, as measured by the unbiased coefficient of variation, than the classic autoregulatory index (p = 0.032) and the Rate of Return (p<0.001), another measure of cerebral autoregulation used for this type of systemic pressure stimulus, from 39.23%±41.91% and 55.31%±31.27%, respectively, to 15.98%±7.75%.

A New Model-Free Index of Dynamic Cerebral Blood Flow Autoregulation

PubMed Central

Chacón, Max; Jara, José Luis; Panerai, Ronney B.

2014-01-01

The classic dynamic autoregulatory index (ARI), proposed by Aaslid and Tiecks, is one of the most widely used methods to assess the efficiency of dynamic cerebral autoregulation. Although this index is often used in clinical research and is also included in some commercial equipment, it exhibits considerable intra-subject variability, and has the tendency to produce false positive results in clinical applications. An alternative index of dynamic cerebral autoregulation is proposed, which overcomes most of the limitations of the classic method and also has the advantage of being model-free. This new index uses two parameters that are obtained directly from the response signal of the cerebral blood flow velocity to a transient decrease in arterial blood pressure provoked by the sudden release of bilateral thigh cuffs, and a third parameter measuring the difference in slope of this response and the change in arterial blood pressure achieved. With the values of these parameters, a corresponding classic autoregulatory index value could be calculated by using a linear regression model built from theoretical curves generated with the Aaslid-Tiecks model. In 16 healthy subjects who underwent repeated thigh-cuff manoeuvres, the model-free approach exhibited significantly lower intra-subject variability, as measured by the unbiased coefficient of variation, than the classic autoregulatory index (p = 0.032) and the Rate of Return (p<0.001), another measure of cerebral autoregulation used for this type of systemic pressure stimulus, from 39.23%±41.91% and 55.31%±31.27%, respectively, to 15.98%±7.75%. PMID:25313519

Practical Approach for Hyperspectral Image Processing in Python

NASA Astrophysics Data System (ADS)

Annala, L.; Eskelinen, M. A.; Hämäläinen, J.; Riihinen, A.; Pölönen, I.

2018-04-01

Python is a very popular programming language among data scientists around the world. Python can also be used in hyperspectral data analysis. There are some toolboxes designed for spectral imaging, such as Spectral Python and HyperSpy, but there is a need for analysis pipeline, which is easy to use and agile for different solutions. We propose a Python pipeline which is built on packages xarray, Holoviews and scikit-learn. We have developed some of own tools, MaskAccessor, VisualisorAccessor and a spectral index library. They also fulfill our goal of easy and agile data processing. In this paper we will present our processing pipeline and demonstrate it in practice.

A cross-sectional survey of the relationship between walking, biking, and the built environment for adults aged over 70 years.

PubMed

Takahashi, Paul Y; Baker, Mitzi A; Cha, Stephan; Targonski, Paul V

2012-01-01

Determine the relationship between walkability scores (using the Walk Score(®)) and activity levels (both bicycle and walking) in adults aged between 70 and 85 years in Rochester, Minnesota. This was a self-reported cross-sectional survey in adults aged over 70 years living in Rochester, Minnesota. Analysis used t-tests or chi-square analysis as appropriate. The primary endpoint was bicycle use or walking. The predictor variables were the Walk Score(®) as determined by their address, Charlson index, Duke Activity Status Index (DASI), and a 12-item short-form survey (SF-12) scores. Secondary analysis used an outcome of functional status (using the DASI) and walkability scores. Fifty-three individuals completed the surveys (48% return rate). The average age in the overall cohort was 77.02 years. Eighty-nine percent of individuals could walk at least a block and 15.1% rode their bicycles. The Walk Scores(®) did not differ between those who walked (38.9 ± 27.4) and those that did not (40.0 ± 36.08; P = 0.93). In a similar fashion, the Walk Scores(®) were not different for those who biked (36.38 ± 27.68) and those that did not (39.44 ± 28.49; P = 0.78). There was no relationship between Walk Scores(®) and DASI; however, a decreased DASI score was associated with increased age and comorbid illness (Charlson Score). In this small pilot survey, there was no difference in Walk Scores(®) between those older adults who walked or biked, compared to those that did not. The Walk Scores(®) were low in both groups, which may indicate the lack of accessibility for all older adults living in Rochester, Minnesota. The functional status seemed to be more related to age or comorbid conditions than the built environment.

Characteristics, Treatment Patterns, and Economic Outcomes of Patients Initiating Injectable Medications for Management of Type 2 Diabetes Mellitus in Japan: Results from a Retrospective Claims Database Analysis.

PubMed

Suzuki, Shuichi; Desai, Urvi; Strizek, Alena; Ivanova, Jasmina; Garcia-Horton, Viviana; Cai, Zhihong; Schmerold, Luke; Liu, Xinyue; Perez-Nieves, Magaly

2018-06-01

This study's objective was to describe characteristics, treatment patterns, and economic outcomes of type 2 diabetes mellitus (T2DM) patients initiating injectable antidiabetic medications in Japan. Adults (≥ 18 years) with T2DM, ≥ 2 claims for injectable antidiabetics between 1 August 2011 and 31 July 2015 (first claim = index date), no evidence of type 1 diabetes mellitus, ≤ 1 claim for insulin, no claims for GLP-1RA before index, and continuous enrollment for 6 months before (baseline) and 12 months after index (follow-up) were selected from the Japan Medical Center Database. Patient characteristics and outcomes during the baseline and follow-up periods were described overall and by provider, using the proxy setting of index medication [hospital (including outpatient departments) for specialists; clinic for general practitioner (GP)]. Of the 2683 patients included (mean age: 50 years, 67% male), 1879 (70%) initiated injectable antidiabetics with specialists and 804 (30%) with GPs. The specialist cohort had a significantly greater comorbidity burden, but lower HbA1c levels during baseline, and was more likely to receive intensified treatment at index than the GP cohort. Almost 40% of patients (almost 30% of GP cohort) did not use antidiabetics during baseline; the remaining patients received oral medications, primarily from GPs. During follow-up, patients used the index medication for approximately 7 months. Independent of specialist vs. GP setting, patients received antidiabetics and medications for T2DM-related comorbidities and complications during the baseline and follow-up periods from the same provider, primarily GPs. The overall average healthcare costs were ¥350,404 during baseline and ¥1,856,727 during follow-up. In Japan, most T2DM patients initiated injectable antidiabetics with specialists vs. GPs. There were considerable differences in characteristics of patients treated by specialists vs. GPs. After initiation, injectable antidiabetics were largely prescribed by GPs. Future research should evaluate the factors associated with different provider practices and communication channels between specialists and GPs to improve patient management. Eli Lilly and Co.

Fuzzy interval Finite Element/Statistical Energy Analysis for mid-frequency analysis of built-up systems with mixed fuzzy and interval parameters

NASA Astrophysics Data System (ADS)

Yin, Hui; Yu, Dejie; Yin, Shengwen; Xia, Baizhan

2016-10-01

This paper introduces mixed fuzzy and interval parametric uncertainties into the FE components of the hybrid Finite Element/Statistical Energy Analysis (FE/SEA) model for mid-frequency analysis of built-up systems, thus an uncertain ensemble combining non-parametric with mixed fuzzy and interval parametric uncertainties comes into being. A fuzzy interval Finite Element/Statistical Energy Analysis (FIFE/SEA) framework is proposed to obtain the uncertain responses of built-up systems, which are described as intervals with fuzzy bounds, termed as fuzzy-bounded intervals (FBIs) in this paper. Based on the level-cut technique, a first-order fuzzy interval perturbation FE/SEA (FFIPFE/SEA) and a second-order fuzzy interval perturbation FE/SEA method (SFIPFE/SEA) are developed to handle the mixed parametric uncertainties efficiently. FFIPFE/SEA approximates the response functions by the first-order Taylor series, while SFIPFE/SEA improves the accuracy by considering the second-order items of Taylor series, in which all the mixed second-order items are neglected. To further improve the accuracy, a Chebyshev fuzzy interval method (CFIM) is proposed, in which the Chebyshev polynomials is used to approximate the response functions. The FBIs are eventually reconstructed by assembling the extrema solutions at all cut levels. Numerical results on two built-up systems verify the effectiveness of the proposed methods.

Interactions of donor sources and media influence the histo-morphological quality of full-thickness skin models.

PubMed

Lange, Julia; Weil, Frederik; Riegler, Christoph; Groeber, Florian; Rebhan, Silke; Kurdyn, Szymon; Alb, Miriam; Kneitz, Hermann; Gelbrich, Götz; Walles, Heike; Mielke, Stephan

2016-10-01

Human artificial skin models are increasingly employed as non-animal test platforms for research and medical purposes. However, the overall histopathological quality of such models may vary significantly. Therefore, the effects of manufacturing protocols and donor sources on the quality of skin models built-up from fibroblasts and keratinocytes derived from juvenile foreskins is studied. Histo-morphological parameters such as epidermal thickness, number of epidermal cell layers, dermal thickness, dermo-epidermal adhesion and absence of cellular nuclei in the corneal layer are obtained and scored accordingly. In total, 144 full-thickness skin models derived from 16 different donors, built-up in triplicates using three different culture conditions were successfully generated. In univariate analysis both media and donor age affected the quality of skin models significantly. Both parameters remained statistically significant in multivariate analyses. Performing general linear model analyses we could show that individual medium-donor-interactions influence the quality. These observations suggest that the optimal choice of media may differ from donor to donor and coincides with findings where significant inter-individual variations of growth rates in keratinocytes and fibroblasts have been described. Thus, the consideration of individual medium-donor-interactions may improve the overall quality of human organ models thereby forming a reproducible test platform for sophisticated clinical research. Copyright © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Rare-Earth Activated Nitride Phosphors: Synthesis, Luminescence and Applications

PubMed Central

Xie, Rong-Jun; Hirosaki, Naoto; Li, Yuanqiang; Takeda, Takashi

2010-01-01

Nitridosilicates are structurally built up on three-dimensional SiN4 tetrahedral networks, forming a very interesting class of materials with high thermomechanical properties, hardness, and wide band gap. Traditionally, nitridosilicates are often used as structural materials such as abrasive particles, cutting tools, turbine blade, etc. Recently, the luminescence of rare earth doped nitridosilicates has been extensively studied, and a novel family of luminescent materials has been developed. This paper reviews the synthesis, luminescence and applications of nitridosilicate phosphors, with emphasis on rare earth nitrides in the system of M-Si-Al-O-N (M = Li, Ca, Sr, Ba, La) and their applications in white LEDs. These phosphors exhibit interesting luminescent properties, such as red-shifted excitation and emission, small Stokes shift, small thermal quenching, and high conversion efficiency, enabling them to use as down-conversion luminescent materials in white LEDs with tunable color temperature and high color rendering index.

Effective phase function of light scattered at small angles by polydisperse particulate media

NASA Astrophysics Data System (ADS)

Turcu, I.

2008-06-01

Particles with typical dimensions higher than the light wavelength and relative refraction indexes close to one, scatter light mainly in the forward direction where the scattered light intensity has a narrow peak. For particulate media accomplishing these requirements the light scattered at small angles in a far-field detecting set-up can be described analytically by an effective phase function (EPF) even in the multiple scattering regime. The EPF model which was built for monodispersed systems has been extended to polydispersed media. The main ingredients consist in the replacement of the single particle phase function and of the optical thickness with their corresponding averaged values. Using a Gamma particle size distribution (PSD) as a testing model, the effect of polydispersity was systematically investigated. The increase of the average radius or/and of the PSD standard deviation leads to the decrease of the angular spreading of the small angle scattered light.

First-principles atomistic Wulff constructions for an equilibrium rutile TiO2 shape modeling

NASA Astrophysics Data System (ADS)

Jiang, Fengzhou; Yang, Lei; Zhou, Dali; He, Gang; Zhou, Jiabei; Wang, Fanhou; Chen, Zhi-Gang

2018-04-01

Identifying the exposed surfaces of rutile TiO2 crystal is crucial for its industry application and surface engineering. In this study, the shape of the rutile TiO2 was constructed by applying equilibrium thermodynamics of TiO2 crystals via first-principles density functional theory (DFT) and Wulff principles. From the DFT calculations, the surface energies of six low-index stoichiometric facets of TiO2 are determined after the calibrations of crystal structure. And then, combined surface energy calculations and Wulff principles, a geometric model of equilibrium rutile TiO2 is built up, which is coherent with the typical morphology of fully-developed equilibrium TiO2 crystal. This study provides fundamental theoretical guidance for the surface analysis and surface modification of the rutile TiO2-based materials from experimental research to industry manufacturing.

A new compact representation of morphological profiles: report on first massive VHR image processing at the JRC

NASA Astrophysics Data System (ADS)

Pesaresi, Martino; Ouzounis, Georgios K.; Gueguen, Lionel

2012-06-01

A new compact representation of dierential morphological prole (DMP) vector elds is presented. It is referred to as the CSL model and is conceived to radically reduce the dimensionality of the DMP descriptors. The model maps three characteristic parameters, namely scale, saliency and level, into the RGB space through a HSV transform. The result is a a medium abstraction semantic layer used for visual exploration, image information mining and pattern classication. Fused with the PANTEX built-up presence index, the CSL model converges to an approximate building footprint representation layer in which color represents building class labels. This process is demonstrated on the rst high resolution (HR) global human settlement layer (GHSL) computed from multi-modal HR and VHR satellite images. Results of the rst massive processing exercise involving several thousands of scenes around the globe are reported along with validation gures.

Least Square Approach for Estimating of Land Surface Temperature from LANDSAT-8 Satellite Data Using Radiative Transfer Equation

NASA Astrophysics Data System (ADS)

Jouybari-Moghaddam, Y.; Saradjian, M. R.; Forati, A. M.

2017-09-01

Land Surface Temperature (LST) is one of the significant variables measured by remotely sensed data, and it is applied in many environmental and Geoscience studies. The main aim of this study is to develop an algorithm to retrieve the LST from Landsat-8 satellite data using Radiative Transfer Equation (RTE). However, LST can be retrieved from RTE, but, since the RTE has two unknown parameters including LST and surface emissivity, estimating LST from RTE is an under the determined problem. In this study, in order to solve this problem, an approach is proposed an equation set includes two RTE based on Landsat-8 thermal bands (i.e.: band 10 and 11) and two additional equations based on the relation between the Normalized Difference Vegetation Index (NDVI) and emissivity of Landsat-8 thermal bands by using simulated data for Landsat-8 bands. The iterative least square approach was used for solving the equation set. The LST derived from proposed algorithm is evaluated by the simulated dataset, built up by MODTRAN. The result shows the Root Mean Squared Error (RMSE) is less than 1.18°K. Therefore; the proposed algorithm can be a suitable and robust method to retrieve the LST from Landsat-8 satellite data.

Hybrid method for building extraction in vegetation-rich urban areas from very high-resolution satellite imagery

NASA Astrophysics Data System (ADS)

Jayasekare, Ajith S.; Wickramasuriya, Rohan; Namazi-Rad, Mohammad-Reza; Perez, Pascal; Singh, Gaurav

2017-07-01

A continuous update of building information is necessary in today's urban planning. Digital images acquired by remote sensing platforms at appropriate spatial and temporal resolutions provide an excellent data source to achieve this. In particular, high-resolution satellite images are often used to retrieve objects such as rooftops using feature extraction. However, high-resolution images acquired over built-up areas are associated with noises such as shadows that reduce the accuracy of feature extraction. Feature extraction heavily relies on the reflectance purity of objects, which is difficult to perfect in complex urban landscapes. An attempt was made to increase the reflectance purity of building rooftops affected by shadows. In addition to the multispectral (MS) image, derivatives thereof namely, normalized difference vegetation index and principle component (PC) images were incorporated in generating the probability image. This hybrid probability image generation ensured that the effect of shadows on rooftop extraction, particularly on light-colored roofs, is largely eliminated. The PC image was also used for image segmentation, which further increased the accuracy compared to segmentation performed on an MS image. Results show that the presented method can achieve higher rooftop extraction accuracy (70.4%) in vegetation-rich urban areas compared to traditional methods.

Analysis of the role of urban vegetation in local climate of Budapest using satellite measurements

NASA Astrophysics Data System (ADS)

Pongracz, Rita; Bartholy, Judit; Dezso, Zsuzsanna; Fricke, Cathy

2016-08-01

Urban areas significantly modify the natural environment due to the concentrated presence of humans and the associated anthropogenic activities. In order to assess this effect, it is essential to evaluate the relationship between urban and vegetated surface covers. In our study we focused on the Hungarian capital, Budapest, in which about 1.7 million inhabitants are living nowadays. The entire city is divided by the river Danube into the hilly, greener Buda side on the west, and the flat, more densely built-up Pest side on the east. Most of the extended urban vegetation, i.e., forests are located in the western Buda side. The effects of the past changing of these green areas are analyzed using surface temperature data calculated from satellite measurements in the infrared channels, and NDVI (Normalized Difference Vegetation Index) derived from visible and near-infrared satellite measurements. For this purpose, data available from sensor MODIS (Moderate Resolution Imaging Spectroradiometer) of NASA satellites (i.e., Terra and Aqua) are used. First, the climatological effects of forests on the urban heat island intensity are evaluated. Then, we also aim to evaluate the relationship of surface temperature and NDVI in this urban environment with special focus on vegetation-related sections of the city where the vegetation cover either increased or decreased remarkably.

When High-Capacity Readers Slow Down and Low-Capacity Readers Speed Up: Working Memory and Locality Effects.

PubMed

Nicenboim, Bruno; Logačev, Pavel; Gattei, Carolina; Vasishth, Shravan

2016-01-01

We examined the effects of argument-head distance in SVO and SOV languages (Spanish and German), while taking into account readers' working memory capacity and controlling for expectation (Levy, 2008) and other factors. We predicted only locality effects, that is, a slowdown produced by increased dependency distance (Gibson, 2000; Lewis and Vasishth, 2005). Furthermore, we expected stronger locality effects for readers with low working memory capacity. Contrary to our predictions, low-capacity readers showed faster reading with increased distance, while high-capacity readers showed locality effects. We suggest that while the locality effects are compatible with memory-based explanations, the speedup of low-capacity readers can be explained by an increased probability of retrieval failure. We present a computational model based on ACT-R built under the previous assumptions, which is able to give a qualitative account for the present data and can be tested in future research. Our results suggest that in some cases, interpreting longer RTs as indexing increased processing difficulty and shorter RTs as facilitation may be too simplistic: The same increase in processing difficulty may lead to slowdowns in high-capacity readers and speedups in low-capacity ones. Ignoring individual level capacity differences when investigating locality effects may lead to misleading conclusions.

Query-Adaptive Hash Code Ranking for Large-Scale Multi-View Visual Search.

PubMed

Liu, Xianglong; Huang, Lei; Deng, Cheng; Lang, Bo; Tao, Dacheng

2016-10-01

Hash-based nearest neighbor search has become attractive in many applications. However, the quantization in hashing usually degenerates the discriminative power when using Hamming distance ranking. Besides, for large-scale visual search, existing hashing methods cannot directly support the efficient search over the data with multiple sources, and while the literature has shown that adaptively incorporating complementary information from diverse sources or views can significantly boost the search performance. To address the problems, this paper proposes a novel and generic approach to building multiple hash tables with multiple views and generating fine-grained ranking results at bitwise and tablewise levels. For each hash table, a query-adaptive bitwise weighting is introduced to alleviate the quantization loss by simultaneously exploiting the quality of hash functions and their complement for nearest neighbor search. From the tablewise aspect, multiple hash tables are built for different data views as a joint index, over which a query-specific rank fusion is proposed to rerank all results from the bitwise ranking by diffusing in a graph. Comprehensive experiments on image search over three well-known benchmarks show that the proposed method achieves up to 17.11% and 20.28% performance gains on single and multiple table search over the state-of-the-art methods.

When High-Capacity Readers Slow Down and Low-Capacity Readers Speed Up: Working Memory and Locality Effects

PubMed Central

Nicenboim, Bruno; Logačev, Pavel; Gattei, Carolina; Vasishth, Shravan

2016-01-01

We examined the effects of argument-head distance in SVO and SOV languages (Spanish and German), while taking into account readers' working memory capacity and controlling for expectation (Levy, 2008) and other factors. We predicted only locality effects, that is, a slowdown produced by increased dependency distance (Gibson, 2000; Lewis and Vasishth, 2005). Furthermore, we expected stronger locality effects for readers with low working memory capacity. Contrary to our predictions, low-capacity readers showed faster reading with increased distance, while high-capacity readers showed locality effects. We suggest that while the locality effects are compatible with memory-based explanations, the speedup of low-capacity readers can be explained by an increased probability of retrieval failure. We present a computational model based on ACT-R built under the previous assumptions, which is able to give a qualitative account for the present data and can be tested in future research. Our results suggest that in some cases, interpreting longer RTs as indexing increased processing difficulty and shorter RTs as facilitation may be too simplistic: The same increase in processing difficulty may lead to slowdowns in high-capacity readers and speedups in low-capacity ones. Ignoring individual level capacity differences when investigating locality effects may lead to misleading conclusions. PMID:27014113

Hierarchical Distributed-Lag Models: Exploring Varying Geographic Scale and Magnitude in Associations Between the Built Environment and Health

PubMed Central

Baek, Jonggyu; Sanchez-Vaznaugh, Emma V.; Sánchez, Brisa N.

2016-01-01

It is well known that associations between features of the built environment and health depend on the geographic scale used to construct environmental attributes. In the built environment literature, it has long been argued that geographic scales may vary across study locations. However, this hypothesized variation has not been systematically examined due to a lack of available statistical methods. We propose a hierarchical distributed-lag model (HDLM) for estimating the underlying overall shape of food environment–health associations as a function of distance from locations of interest. This method enables indirect assessment of relevant geographic scales and captures area-level heterogeneity in the magnitudes of associations, along with relevant distances within areas. The proposed model was used to systematically examine area-level variation in the association between availability of convenience stores around schools and children's weights. For this case study, body mass index (weight kg)/height (m)2) z scores (BMIz) for 7th grade children collected via California's 2001–2009 FitnessGram testing program were linked to a commercial database that contained locations of food outlets statewide. Findings suggested that convenience store availability may influence BMIz only in some places and at varying distances from schools. Future research should examine localized environmental or policy differences that may explain the heterogeneity in convenience store–BMIz associations. PMID:26888753

The built environment moderates effects of family-based childhood obesity treatment over 2 years.

PubMed

Epstein, Leonard H; Raja, Samina; Daniel, Tinuke Oluyomi; Paluch, Rocco A; Wilfley, Denise E; Saelens, Brian E; Roemmich, James N

2012-10-01

Research suggests the neighborhood built environment is related to child physical activity and eating. The purpose of this study was to determine if characteristics of the neighborhood environment moderate the relationship between obesity treatment and weight loss, and if outcomes of particular treatments are moderated by built environment characteristics. The relationship between the built environment and standardized BMI (zBMI) changes for 191 8-12-year-old children who participated in one of four randomized, controlled trials of pediatric weight management was assessed using mixed models analysis of covariance. At 2-year follow-up, greater parkland, fewer convenience stores, and fewer supermarkets were associated with greater zBMI reduction across all interventions. No treatments interacted with characteristics of the built environment. Activity- and eating-related built neighborhood characteristics are associated with child success in behavioral obesity treatments. Efficacy may be improved by individualizing treatments based on built environment characteristics.

Calibration of a Background Oriented Schlieren (BOS) Set-up

NASA Astrophysics Data System (ADS)

Porta, David; Echeverría, Carlos; Cardoso, Hiroki; Aguayo, Alejandro; Stern, Catalina

2014-11-01

We use two materials with different known indexes of refraction to calibrate a Background Oriented Schlieren (BOS) experimental set-up, and to validate the Lorenz-Lorentz equation. BOS is used in our experiments to determine local changes of density in the shock pattern of an axisymmetric supersonic air jet. It is important to validate, in particular, the Gladstone Dale approximation (index of refraction close to one) in our experimental conditions and determine the uncertainty of our density measurements. In some cases, the index of refraction of the material is well known, but in others the density is measured and related to the displacement field. We acknowledge support from UNAM through DGAPA PAPIIT IN117712 and the Graduate Program in Mechanical Engineering.

Technical Assistance for the Conservation of Built Heritage at Bagan, Myanmar

NASA Astrophysics Data System (ADS)

Mezzino, D.; Santana Quintero, M.; Ma Pwint, P.; Tin Htut Latt, W.; Rellensmann, C.

2016-06-01

Presenting the outcomes of a capacity building activity, this contribution illustrates a replicable recording methodology to obtain timely, relevant and accurate information about conditions, materials and transformations of heritage structures. The purpose of the presented training activity consisted in developing local capabilities for the documentation of the built heritage at Bagan, Myanmar, employing different IT-supported techniques. Under the Director of UNESCO, the direct supervision of the chief of the culture unit, and in close consultation and cooperation with the Association of Myanmar Architects, the Department of Archaeology National Museum and Library (DoA) a documentation strategy has been developed in order to set up a recording methodology for the over three thousand Bagan monuments. The site, located in central Myanmar, in South East Asia, was developed between the IX and the XIII century as capital of the Myanmar kingdom. In the last years, this outstanding site has been exposed to an increasing number of natural hazards including earthquakes and flooding that strongly affected its built structures. Therefore, a documentation strategy to quickly capture shape, color, geometry and conditions of the monuments, in order to develop proper conservation projects, was needed. The scope of the training activity consisted in setting up a recording strategy updating the existing Bagan inventory, using three Buddhist temples as pilot cases study. The three documented temples were different in size, construction period, conditions and shape. The documentation included several IT-supported techniques including: Electronic Distance Measurements (EDM), SFM Photogrammetry, Laser Scanning, Record Photography as well as hand measurement and field notes. The monuments' surveying has been developed in accordance with the guidelines and standards established by the ICOMOS International Committee for Documentation of Cultural Heritage (CIPA). Recommendations on how to extend the adopted methodology to the other Bagan monuments have been also elaborated.

What are hot and what are not in an urban landscape: quantifying and explaining the land surface temperature pattern in Beijing, China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuang, Wenhui; Liu, Yue; Dou, Yinyin

Understanding how landscape components affect the urban heat islands is crucial for urban ecological planning and sustainable development. The purpose of this research was to quantify the spatial pattern of land surface temperatures (LSTs) and associated heat fluxes in relation to land-cover types in Beijing, China, using portable infrared thermometers, thermal infrared imagers, and the moderate resolution imaging spectroradiometer. The spatial differences and the relationships between LSTs and the hierarchical landscape structure were analyzed with in situ observations of surface radiation and heat fluxes. Large LST differences were found among various land-use/land-cover types, urban structures, and building materials. Within themore » urban area, the mean LST of urban impervious surfaces was about 6–12°C higher than that of the urban green space. LSTs of built-up areas were on average 3–6°C higher than LSTs of rural areas. The observations for surface radiation and heat fluxes indicated that the differences were caused by different fractions of sensible heat or latent heat flux in net radiation. LSTs decreased with increasing elevation and normalized difference vegetation index. Variations in building materials and urban structure significantly influenced the spatial pattern of LSTs in urban areas. By contrast, elevation and vegetation cover are the major determinants of the LST pattern in rural areas. In summary, to alleviate urban heat island intensity, urban planners and policy makers should pay special attention to the selection of appropriate building materials, the reasonable arrangement of urban structures, and the rational design of landscape components.« less

Estimation of daily maximum and minimum air temperatures in urban landscapes using MODIS time series satellite data

NASA Astrophysics Data System (ADS)

Yoo, Cheolhee; Im, Jungho; Park, Seonyoung; Quackenbush, Lindi J.

2018-03-01

Urban air temperature is considered a significant variable for a variety of urban issues, and analyzing the spatial patterns of air temperature is important for urban planning and management. However, insufficient weather stations limit accurate spatial representation of temperature within a heterogeneous city. This study used a random forest machine learning approach to estimate daily maximum and minimum air temperatures (Tmax and Tmin) for two megacities with different climate characteristics: Los Angeles, USA, and Seoul, South Korea. This study used eight time-series land surface temperature (LST) data from Moderate Resolution Imaging Spectroradiometer (MODIS), with seven auxiliary variables: elevation, solar radiation, normalized difference vegetation index, latitude, longitude, aspect, and the percentage of impervious area. We found different relationships between the eight time-series LSTs with Tmax/Tmin for the two cities, and designed eight schemes with different input LST variables. The schemes were evaluated using the coefficient of determination (R2) and Root Mean Square Error (RMSE) from 10-fold cross-validation. The best schemes produced R2 of 0.850 and 0.777 and RMSE of 1.7 °C and 1.2 °C for Tmax and Tmin in Los Angeles, and R2 of 0.728 and 0.767 and RMSE of 1.1 °C and 1.2 °C for Tmax and Tmin in Seoul, respectively. LSTs obtained the day before were crucial for estimating daily urban air temperature. Estimated air temperature patterns showed that Tmax was highly dependent on the geographic factors (e.g., sea breeze, mountains) of the two cities, while Tmin showed marginally distinct temperature differences between built-up and vegetated areas in the two cities.

What are hot and what are not in an urban landscape: quantifying and explaining the land surface temperature pattern in Beijing, China

DOE PAGES

Kuang, Wenhui; Liu, Yue; Dou, Yinyin; ...

2014-12-06

Understanding how landscape components affect the urban heat islands is crucial for urban ecological planning and sustainable development. The purpose of this research was to quantify the spatial pattern of land surface temperatures (LSTs) and associated heat fluxes in relation to land-cover types in Beijing, China, using portable infrared thermometers, thermal infrared imagers, and the moderate resolution imaging spectroradiometer. The spatial differences and the relationships between LSTs and the hierarchical landscape structure were analyzed with in situ observations of surface radiation and heat fluxes. Large LST differences were found among various land-use/land-cover types, urban structures, and building materials. Within themore » urban area, the mean LST of urban impervious surfaces was about 6–12°C higher than that of the urban green space. LSTs of built-up areas were on average 3–6°C higher than LSTs of rural areas. The observations for surface radiation and heat fluxes indicated that the differences were caused by different fractions of sensible heat or latent heat flux in net radiation. LSTs decreased with increasing elevation and normalized difference vegetation index. Variations in building materials and urban structure significantly influenced the spatial pattern of LSTs in urban areas. By contrast, elevation and vegetation cover are the major determinants of the LST pattern in rural areas. In summary, to alleviate urban heat island intensity, urban planners and policy makers should pay special attention to the selection of appropriate building materials, the reasonable arrangement of urban structures, and the rational design of landscape components.« less

Anatomy of hierarchy: Feedforward and feedback pathways in macaque visual cortex

PubMed Central

Markov, Nikola T; Vezoli, Julien; Chameau, Pascal; Falchier, Arnaud; Quilodran, René; Huissoud, Cyril; Lamy, Camille; Misery, Pierre; Giroud, Pascale; Ullman, Shimon; Barone, Pascal; Dehay, Colette; Knoblauch, Kenneth; Kennedy, Henry

2013-01-01

The laminar location of the cell bodies and terminals of interareal connections determines the hierarchical structural organization of the cortex and has been intensively studied. However, we still have only a rudimentary understanding of the connectional principles of feedforward (FF) and feedback (FB) pathways. Quantitative analysis of retrograde tracers was used to extend the notion that the laminar distribution of neurons interconnecting visual areas provides an index of hierarchical distance (percentage of supragranular labeled neurons [SLN]). We show that: 1) SLN values constrain models of cortical hierarchy, revealing previously unsuspected areal relations; 2) SLN reflects the operation of a combinatorial distance rule acting differentially on sets of connections between areas; 3) Supragranular layers contain highly segregated bottom-up and top-down streams, both of which exhibit point-to-point connectivity. This contrasts with the infragranular layers, which contain diffuse bottom-up and top-down streams; 4) Cell filling of the parent neurons of FF and FB pathways provides further evidence of compartmentalization; 5) FF pathways have higher weights, cross fewer hierarchical levels, and are less numerous than FB pathways. Taken together, the present results suggest that cortical hierarchies are built from supra- and infragranular counterstreams. This compartmentalized dual counterstream organization allows point-to-point connectivity in both bottom-up and top-down directions. PMID:23983048

Association of weight loss with improved disease activity in patients with rheumatoid arthritis: A retrospective analysis using electronic medical record data

PubMed Central

Kreps, David J.; Halperin, Florencia; Desai, Sonali P.; Zhang, Zhi Z.; Losina, Elena; Olson, Amber T.; Karlson, Elizabeth W.; Bermas, Bonnie L.; Sparks, Jeffrey A.

2018-01-01

Objective To evaluate the association between weight loss and rheumatoid arthritis (RA) disease activity. Methods We conducted a retrospective cohort study of RA patients seen at routine clinic visits at an academic medical center, 2012–2015. We included patients who had ≥2 clinical disease activity index (CDAI) measures. We identified visits during follow-up where the maximum and minimum weights occurred and defined weight change and CDAI change as the differences of these measures at these visits. We defined disease activity improvement as CDAI decrease of ≥5 and clinically relevant weight loss as ≥5 kg. We performed logistic regression analyses to establish the association between improved disease activity and weight loss and baseline BMI category (≥25 kg/m2 or <25 kg/m2). We built linear regression models to investigate the association between continuous weight loss and CDAI change among patients who were overweight/obese at baseline and who lost weight during follow-up. Results We analyzed data from 174 RA patients with a median follow-up of 1.9 years (IQR 1.3–2.4); 117 (67%) were overweight/obese at baseline, and 53 (31%) lost ≥5 kg during follow-up. Patients who were overweight/obese and lost ≥5 kg had three-fold increased odds of disease activity improvement compared to those who did not (OR 3.03, 95%CI 1.18–7.83). Among those who were overweight/obese at baseline, each kilogram weight loss was associated with CDAI improvement of 1.15 (95%CI 0.42–1.88). Our study was limited by using clinical data from a single center without fixed intervals for assessments. Conclusion Clinically relevant weight loss (≥5 kg) was associated with improved RA disease activity in the routine clinical setting. Further studies are needed for replication and to evaluate the effect of prospective weight loss interventions on RA disease activity. PMID:29606976

The TESIS Project: Revealing Massive Early-Type Galaxies at z > 1

NASA Astrophysics Data System (ADS)

Saracco, P.; Longhetti, M.; Severgnini, P.; Della Ceca, R.; Braito, V.; Bender, R.; Drory, N.; Feulner, G.; Hopp, U.; Mannucci, F.; Maraston, C.

How and when present-day massive early-type galaxies built up and what type of evolution has characterized their growth (star formation and/or merging) still remain open issues. The different competing scenarios of galaxy formation predict much different properties of early-type galaxies at z > 1. The "monolithic" collapse predicts that massive spheroids formed at high redshift (z > 2.5-3) and that their comoving density is constant at z < 2.5-3 since they evolve only in luminosity. On the contrary, in the hierarchical scenario massive spheroids are built up through subsequent mergers reaching their final masses at z < 1.5 [3,5]. As a consequence, massive systems are very rare at z > 1, their comoving density decreases from z = 0 to z ~ 1.5 and they should experience their last burst of star formation at z < 1.5, concurrent with the merging event(s) of their formation. These opposed predicted properties of early-types at z > 1 can be probed observationally once a well defined sample of massive early-types at z > 1 is available. We are constructing such a sample through a dedicated near-IR very low resolution (λ/Δλ≃50) spectroscopic survey (TNG EROs Spectroscopic Identification Survey, TESIS, [6]) of a complete sample of 30 bright (K < 18.5) Extremely Red Objects (EROs).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, zhifeng; He, Chunyang; Zhou, Yuyu

Urbanization has transformed the world’s landscapes, resulting in a series of ecological and environmental problems. To assess urbanization impacts and improve sustainability, one of the first questions that we must address is: how much of the world’s land has been urbanized? Unfortunately, the estimates of the global urban land reported in the literature vary widely from less than 1% to 3% primarily because different definitions of urban land were used. To evade confusion, here we propose a hierarchical framework for representing and communicating the spatial extent of the world’s urbanized land at the global, regional, and more local levels. Themore » hierarchical framework consists of three spatially nested definitions: “urban area” that is delineated by administrative boundaries, “built-up area” that is dominated by artificial surfaces, and “impervious surface area” that is devoid of life. These are really three different measures of urbanization. In 2010, the global urban land was close to 3%, the global built-up area was 0.65%, and the global impervious surface area was 0.45%, of the word’s total land area (excluding Antarctica and Greenland). We argue that this hierarchy of urban land measures, in particular the ratios between them, can also facilitate better understanding the biophysical and socioeconomic processes and impacts of urbanization.« less

Effects of land-use patterns on in-stream nitrogen in a highly-polluted river basin in Northeast China.

PubMed

Bu, Hongmei; Zhang, Yuan; Meng, Wei; Song, Xianfang

2016-05-15

This study investigated the effects of land-use patterns on nitrogen pollution in the Haicheng River basin in Northeast China during 2010 by conducting statistical and spatial analyses and by analyzing the isotopic composition of nitrate. Correlation and stepwise regressions indicated that land-use types and landscape metrics were correlated well with most river nitrogen variables and significantly predicted them during different sampling seasons. Built-up land use and shape metrics dominated in predicting nitrogen variables over seasons. According to the isotopic compositions of river nitrate in different zones, the nitrogen sources of the river principally originated from synthetic fertilizer, domestic sewage/manure, soil organic matter, and atmospheric deposition. Isotope mixing models indicated that source contributions of river nitrogen significantly varied from forested headwaters to densely populated towns of the river basin. Domestic sewage/manure was a major contributor to river nitrogen with the proportions of 76.4 ± 6.0% and 62.8 ± 2.1% in residence and farmland-residence zones, respectively. This research suggested that regulating built-up land uses and reducing discharges of domestic sewage and industrial wastewater would be effective methods for river nitrogen control. Copyright © 2016 Elsevier B.V. All rights reserved.

Mapping deforestation and urban expansion in Freetown, Sierra Leone, from pre- to post-war economic recovery.

PubMed

Mansaray, Lamin R; Huang, Jingfeng; Kamara, Alimamy A

2016-08-01

Freetown, the capital of Sierra Leone has experienced vast land-cover changes over the past three decades. In Sierra Leone, however, availability of updated land-cover data is still a problem even for environmental managers. This study was therefore, conducted to provide up-to-date land-cover data for Freetown. Multi-temporal Landsat data at 1986, 2001, and 2015 were obtained, and a maximum likelihood supervised classification was employed. Eight land-cover classes or categories were recognized as follows: water, wetland, built-up, dense forest, sparse forest, grassland, barren, and mangrove. Land-cover changes were mapped via post-classification change detection. The persistence, gain, and loss of each land-cover class, and selected land conversions were also quantified. An overall classification accuracy of 87.3 % and a Kappa statistic of 0.85 were obtained for the 2015 map. From 1986 to 2015, water, built-up, grassland, and barren had net gains, whereas forests, wetlands, and mangrove had net loses. Conversion analyses among forests, grassland, and built-up show that built-up had targeted grassland and avoided forests. This study also revealed that, the overall land-cover change at 2001-2015 was higher (28.5 %) than that recorded at 1986-2001 (20.9 %). This is attributable to the population increase in Freetown and the high economic growth and infrastructural development recorded countrywide after the civil war. In view of the rapid land-cover change and its associated environmental impacts, this study recommends the enactment of policies that would strike a balance between urbanization and environmental sustainability in Freetown.

Validation Data for Mechanical System Algorithms Used in Building Energy Analysis Programs.

DTIC Science & Technology

1982-02-01

15 Zone Design 15 Built-Up Air Handler 15 Ventilation Requirements 16 The DES 16 Duct Design 17 Air -Delivery System 17 VAV Operation 17 Constant Volume...observed to operate well at reduced air flows, even at low flow in the so- called surge region. Recommendations 1. The HVAC system and component...With Inlet Guide Vanes Operating Within a Built-Up Air Handler 31 Test 2 -- Boiler Operation, Capacity, Efficiency, and Stand-By Losses 32 Test 3

Supplying the Giant

NASA Technical Reports Server (NTRS)

Lawson, Larry

2003-01-01

It was critical for our team to find a radically different way of doing business. Deciding to build the airframe out of composites was the first step, refining processes from the boat building industry was second, and the final step was choosing a supplier. Lockheed Martin built the first prototypes at our Skunk Works facility in Palmdale, California. These units were hand-built and used early prototypical tooling. They looked great but were not affordable. We had to focus on minimizing touch labor and cycle time and reducing material costs. We needed a company to produce the composite quilts we would use to avoid hand lay-ups. The company we found surprised a lot of people. We partnered with a small company outside of Boston whose primary business was making baseball bats and golf club shafts.

Beamlet diagnostics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Theys, M.

1994-05-06

Beamlet is a high power laser currently being built at Lawrence Livermore National Lab as a proof of concept for the National Ignition Facility (NIF). Beamlet is testing several areas of laser advancements, such as a 37cm Pockels cell, square amplifier, and propagation of a square beam. The diagnostics on beamlet tell the operators how much energy the beam has in different locations, the pulse shape, the energy distribution, and other important information regarding the beam. This information is being used to evaluate new amplifier designs, and extrapolate performance to the NIF laser. In my term at Lawrence Livermore Nationalmore » Laboratory I have designed and built a diagnostic, calibrated instruments used on diagnostics, setup instruments, hooked up communication lines to the instruments, and setup computers to control specific diagnostics.« less

Analysis of Water Resource Utilization Potential for Jiangsu Coastal Area ' in Nantong City

NASA Astrophysics Data System (ADS)

Ren, Li; Liu, Jin-Tao; Ni, Jian-Jun

2015-04-01

Along with the advance of the growth of population and social economy, requirements for water quality and quantity in coastal areas is getting higher and higher, but due to the uneven distribution of rainfall years and water exploitation, use and management level, the influence of the shortage of water resources is increasingly prominent, seriously restricting the social and economic sustainable development in this region. Accordingly, water resource utilization potential in Jiangsu coastal region is vital for water security in the region. Taking Nantong City as the study area, the regional water resources development and utilization status were evaluated. In this paper, the meaning of water resources, water resources development and utilization, and water resources development and utilization of the three stages of concepts such as system were discussed. Then the development and utilization of regional water resource evaluation were carried out, and the significance of regional society, economy, resources and environment and its development status quo of water resources were exploited. According to conditions and area source, an evaluation index system for development and utilization of water resources of Nantong was built up. The index layer was composed of 16 indicators. In this study, analytic hierarchy process (AHP) was used to determine of weights of indicators at all levels in the index system. Multistage fuzzy comprehensive evaluation model was selected to evaluate the water resources development and utilization status of Nantong, and then water resource utilization potential of Nantong was analyzed.

One-pot synthesis of star-shaped macromolecules containing polyglycidol and poly(ethylene oxide) arms.

PubMed

Lapienis, Grzegorz; Penczek, Stanislaw

2005-01-01

Synthesis of fully hydrophilic star-shaped macromolecules with different kinds of arms (A(x)B(y)C(z)) based on polyglycidol (PGL, A(x)) and poly(ethylene oxide) (PEO, C(z)) arms and diepoxy compounds (diglycidyl ethers of ethylene glycol (DGEG) or neopentyl glycol (DGNG) in the core, B(y)) forming the core is described. Precursors of arms were prepared by polymerization of glycidol with protected -OH groups. The first-generation stars were formed in the series of consecutive-parallel reactions of arms A(x) with diepoxy compounds (B). These first-generation stars (A(x)B(y)), having approximately O-, Mt+ groups on the cores, were used as multianionic initiators for the second generation of arms (C(z)) built by polymerization of ethylene oxide. The products with M(n) up to 10(5) and having up to approximately 40 arms were obtained. The number of arms (f) was determined by direct measurements of M(n) of the first-generation stars (M(n) of arms A(x) is known), compared with f calculated from the branching index g, determined from R(g) measured with size-exclusion chromatography (SEC) triple detection with TriSEC software. The progress of the star formation was monitored by 1H NMR and SEC. These novel water-soluble stars, having a large number of hydroxyl groups, both at the ends of PEO arms as well as within the PGL arms, can be functionalized and further used for attaching compounds of interest. This approach opens, therefore, a new way of "multiPEGylation".

Secondary Alveolar Bone Grafting in Patients Born With Unilateral Cleft Lip and Palate: A 20-Year Follow-up.

PubMed

Jabbari, Fatemeh; Wiklander, Laila; Reiser, Erika; Thor, Andreas; Hakelius, Malin; Nowinski, Daniel

2018-02-01

To identify factors of oral health important for the final outcome, after secondary alveolar bone grafting in patients born with unilateral cleft lip and palate and compare occlusal radiographs with cone beam computed tomography (CBCT) in assessment of alveolar bone height. Observational follow-up study. Cleft Lip and Palate Team, Craniofacial Center, Uppsala University Hospital, Sweden. 40 nonsyndromic, Caucasian patients with unilateral complete cleft lip and palate. Clinical examination, CBCT, and occlusal radiographs. Alveolar bone height was evaluated according to Bergland index at a 20-year follow-up. The alveolar bone height in the cleft area was significantly reduced compared to a previously reported 10-year follow-up in the same cohort by total ( P = .045) and by subgroup with dental restoration ( P = .0078). This was positively correlated with the gingival bleeding index (GBI) ( r = 0.51, P = .0008) and presence of dental restorations in the cleft area ( r = 0.45, P = .0170). There was no difference in the Bergland index generated from scoring the alveolar bone height on occlusal radiographs as with the equivalent index on CBCT. Patients rehabilitated with complex dental restoration seems to be at higher risk for progression of bone loss in the cleft area. Supportive periodontal therapy should be implemented after complex dental restorations in cleft patients. Conventional occlusal radiographs provide an adequate image for evaluating postoperative bone height in clinical follow-up.

U.S. broiler housing ammonia emissions inventory

NASA Astrophysics Data System (ADS)

Gates, R. S.; Casey, K. D.; Wheeler, E. F.; Xin, H.; Pescatore, A. J.

Using recently published baseline ammonia emissions data for U.S. broiler chicken housing, we present a method of estimating their contribution to an annual ammonia budget that is different from that used by USEPA. Emission rate increases in a linear relationship with flock age from near zero at the start of the flock to a maximum at the end of the flock, 28-65 days later. Market weight of chickens raised for meat varies from "broilers" weighing about 2 kg to "roasters" weighing about 3 kg. Multiple flocks of birds are grown in a single house annually, with variable downtime to prepare the house between flocks. The method takes into account weight and number of chickens marketed. Uncertainty in baseline emissions estimates is used so that inventory estimates are provided with error estimates. The method also incorporates the condition of litter that birds are raised upon and the varying market weight of birds grown. Using 2003 USDA data on broiler production numbers, broiler housing is estimated to contribute 8.8-11.7 kT ammonia for new and built-up litter, respectively, in Kentucky and 240-324 kT ammonia for new and built-up litter, respectively, nationally. Results suggest that a 10% uncertainty in annual emission rate is expected for the market weight categories of broilers, heavy broilers, and roasters. A 27-47% reduction in annual housing emission rate is predicted if new rather than built-up litter were used for every flock. The estimating method can be adapted to other meat bird building emissions and future ammonia emission strategies, with suitable insertion of an age-dependent emission factor or slope into a predictive model equation. The method can be readily applied and is an alternative to that used by USEPA.

Comparison of weight loss among named diet programs in overweight and obese adults: a meta-analysis.

PubMed

Johnston, Bradley C; Kanters, Steve; Bandayrel, Kristofer; Wu, Ping; Naji, Faysal; Siemieniuk, Reed A; Ball, Geoff D C; Busse, Jason W; Thorlund, Kristian; Guyatt, Gordon; Jansen, Jeroen P; Mills, Edward J

2014-09-03

Many claims have been made regarding the superiority of one diet or another for inducing weight loss. Which diet is best remains unclear. To determine weight loss outcomes for popular diets based on diet class (macronutrient composition) and named diet. Search of 6 electronic databases: AMED, CDSR, CENTRAL, CINAHL, EMBASE, and MEDLINE from inception of each database to April 2014. Overweight or obese adults (body mass index ≥25) randomized to a popular self-administered named diet and reporting weight or body mass index data at 3-month follow-up or longer. Two reviewers independently extracted data on populations, interventions, outcomes, risk of bias, and quality of evidence. A Bayesian framework was used to perform a series of random-effects network meta-analyses with meta-regression to estimate the relative effectiveness of diet classes and programs for change in weight and body mass index from baseline. Our analyses adjusted for behavioral support and exercise. Weight loss and body mass index at 6- and 12-month follow-up (±3 months for both periods). Among 59 eligible articles reporting 48 unique randomized trials (including 7286 individuals) and compared with no diet, the largest weight loss was associated with low-carbohydrate diets (8.73 kg [95% credible interval {CI}, 7.27 to 10.20 kg] at 6-month follow-up and 7.25 kg [95% CI, 5.33 to 9.25 kg] at 12-month follow-up) and low-fat diets (7.99 kg [95% CI, 6.01 to 9.92 kg] at 6-month follow-up and 7.27 kg [95% CI, 5.26 to 9.34 kg] at 12-month follow-up). Weight loss differences between individual diets were minimal. For example, the Atkins diet resulted in a 1.71 kg greater weight loss than the Zone diet at 6-month follow-up. Between 6- and 12-month follow-up, the influence of behavioral support (3.23 kg [95% CI, 2.23 to 4.23 kg] at 6-month follow-up vs 1.08 kg [95% CI, -1.82 to 3.96 kg] at 12-month follow-up) and exercise (0.64 kg [95% CI, -0.35 to 1.66 kg] vs 2.13 kg [95% CI, 0.43 to 3.85 kg], respectively) on weight loss differed. Significant weight loss was observed with any low-carbohydrate or low-fat diet. Weight loss differences between individual named diets were small. This supports the practice of recommending any diet that a patient will adhere to in order to lose weight.

Aural rehabilitation in children with cochlear implants: a study of cognition, social communication, and motor skill development.

PubMed

Jeddi, Zahra; Jafari, Zahra; Motasaddi Zarandy, Masoud; Kassani, Aziz

2014-03-01

The purpose of this study was to investigate the benefits of aural rehabilitation on the development of cognition, social communication, and motor skills in children with cochlear implants. The study examined the development of cognition, social communication, and motor skills in 15 deaf children (7 males, 8 females; mean age 45 months 27 days) using the Newsha Developmental Scale before they received the cochlear implants, and then again 2, 4, 6, and 8 months after the implantation. The developmental age, Pretest Developmental Rate, Intervention Efficiency Index, and Proportional Change Index were calculated for each skill. There were significant differences between the preintervention and four follow-up Developmental Rate assessments for cognition, social communication, and motor skills (P < 0.0001). Significant differences were also observed between the four follow-up Proportional Change Index assessments for cognition, social communication, and motor skills (P ≤ 0.005). Cochlear implantation and aural rehabilitation may result in accelerated rates of cognition, social communication, and motor skill development in deaf children.

Measurement of 3D refractive index distribution by optical diffraction tomography

NASA Astrophysics Data System (ADS)

Chi, Weining; Wang, Dayong; Wang, Yunxin; Zhao, Jie; Rong, Lu; Yuan, Yuanyuan

2018-01-01

Optical Diffraction Tomography (ODT), as a novel 3D imaging technique, can obtain a 3D refractive index (RI) distribution to reveal the important optical properties of transparent samples. According to the theory of ODT, an optical diffraction tomography setup is built based on the Mach-Zehnder interferometer. The propagation direction of object beam is controlled by a 2D translation stage, and 121 holograms based on different illumination angles are recorded by a Charge-coupled Device (CCD). In order to prove the validity and accuracy of the ODT, the 3D RI profile of microsphere with a known RI is firstly measured. An iterative constraint algorithm is employed to improve the imaging accuracy effectively. The 3D morphology and average RI of the microsphere are consistent with that of the actual situation, and the RI error is less than 0.0033. Then, an optical element fabricated by laser with a non-uniform RI is taken as the sample. Its 3D RI profile is obtained by the optical diffraction tomography system.

Finding relevant biomedical datasets: the UC San Diego solution for the bioCADDIE Retrieval Challenge

PubMed Central

Wei, Wei; Ji, Zhanglong; He, Yupeng; Zhang, Kai; Ha, Yuanchi; Li, Qi; Ohno-Machado, Lucila

2018-01-01

Abstract The number and diversity of biomedical datasets grew rapidly in the last decade. A large number of datasets are stored in various repositories, with different formats. Existing dataset retrieval systems lack the capability of cross-repository search. As a result, users spend time searching datasets in known repositories, and they typically do not find new repositories. The biomedical and healthcare data discovery index ecosystem (bioCADDIE) team organized a challenge to solicit new indexing and searching strategies for retrieving biomedical datasets across repositories. We describe the work of one team that built a retrieval pipeline and examined its performance. The pipeline used online resources to supplement dataset metadata, automatically generated queries from users’ free-text questions, produced high-quality retrieval results and achieved the highest inferred Normalized Discounted Cumulative Gain among competitors. The results showed that it is a promising solution for cross-database, cross-domain and cross-repository biomedical dataset retrieval. Database URL: https://github.com/w2wei/dataset_retrieval_pipeline PMID:29688374

[Local Regression Algorithm Based on Net Analyte Signal and Its Application in Near Infrared Spectral Analysis].

PubMed

Zhang, Hong-guang; Lu, Jian-gang

2016-02-01

Abstract To overcome the problems of significant difference among samples and nonlinearity between the property and spectra of samples in spectral quantitative analysis, a local regression algorithm is proposed in this paper. In this algorithm, net signal analysis method(NAS) was firstly used to obtain the net analyte signal of the calibration samples and unknown samples, then the Euclidean distance between net analyte signal of the sample and net analyte signal of calibration samples was calculated and utilized as similarity index. According to the defined similarity index, the local calibration sets were individually selected for each unknown sample. Finally, a local PLS regression model was built on each local calibration sets for each unknown sample. The proposed method was applied to a set of near infrared spectra of meat samples. The results demonstrate that the prediction precision and model complexity of the proposed method are superior to global PLS regression method and conventional local regression algorithm based on spectral Euclidean distance.

Built-up edge investigation in vibration drilling of Al2024-T6.

PubMed

Barani, A; Amini, S; Paktinat, H; Fadaei Tehrani, A

2014-07-01

Adding ultrasonic vibrations to drilling process results in an advanced hybrid machining process, entitled "vibration drilling". This study presents the design and fabrication of a vibration drilling tool by which both rotary and vibrating motions are applied to drill simultaneously. High frequency and low amplitude vibrations were generated by an ultrasonic transducer with frequency of 19.65 kHz. Ultrasonic transducer was controlled by a MPI ultrasonic generator with 3 kW power. The drilling tool and workpiece material were HSS two-flute twist drill and Al2024-T6, respectively. The aim of this study was investigating on the effect of ultrasonic vibrations on built-up edge, surface quality, chip morphology and wear mechanisms of drill edges. Therefore, these factors were studied in both vibration and ordinary drilling. Based on the achieved results, vibration drilling offers less built-up edge and better surface quality compared to ordinary drilling. Copyright © 2014 Elsevier B.V. All rights reserved.

Analysis of JSI TRIGA MARK II reactor physical parameters calculated with TRIPOLI and MCNP.

PubMed

Henry, R; Tiselj, I; Snoj, L

2015-03-01

New computational model of the JSI TRIGA Mark II research reactor was built for TRIPOLI computer code and compared with existing MCNP code model. The same modelling assumptions were used in order to check the differences of the mathematical models of both Monte Carlo codes. Differences between the TRIPOLI and MCNP predictions of keff were up to 100pcm. Further validation was performed with analyses of the normalized reaction rates and computations of kinetic parameters for various core configurations. Copyright © 2014 Elsevier Ltd. All rights reserved.

Influence of urbanization-driven land use/cover change on climate: The case of Addis Ababa, Ethiopia

NASA Astrophysics Data System (ADS)

Arsiso, Bisrat Kifle; Mengistu Tsidu, Gizaw; Stoffberg, Gerrit Hendrik; Tadesse, Tsegaye

2018-06-01

Land use change is the second most important anthropogenic influence on climate beside the emission of greenhouse gases. Urbanization is leading to significant land use changes in Africa since the continent is undergoing rapid urbanization and population growth in recent decades. Addis Ababa is one of these fast growing cities in the continent. Therefore, detection of land use change is very important to identify its impact on climate and sustainable land use management of the city. The study used Landsat images to generate land use/land cover change map for the city. The normalized difference vegetation index (NDVI) is used to detect the major changes of vegetation cover occurred between 1986 and 2011 as a result of land use and land cover change. Downscaled HadCM3 simulations under A2 and B2 emission scenarios is used to investigate future urban heat island (UHI) over the city of Addis Ababa. In the city, the analysis of Landsat images has shown that the built-up areas have increased by 121.88 km2 within the last 25 years. This finding is consistent with NDVI images taken over the same period that reveal a decline in vegetation cover. The impact of the urbanization-driven land use/cover change has resulted in notable nocturnal urban heat island (UHI) as revealed from an average increase in minimum temperature of 1.5 °C at the centre of the city relative to rural site over the 1960-2001 period. The mean of the 2006-2010 spatial minimum temperature anomaly with respect to the base period mean of 1981-2005 is consistent with the observed UHI. The temperature in the central areas (both commercial and residential sectors) of Addis Ababa is warmer than the surrounding areas. The thermal gradient increase from about 1.44 °C at the centre (Arada, Addis Ketema, Lideta and Kirkos) to 0.21 °C at the peripheral parts of the city (Gulele, Bole, Nefasilk-Lafto, Kolfe Keranio and east of Yeka sub-cities) transecting across the hot (high-density urban) to moderately warm to cool (non-built-up) areas. However, the maximum temperature and rainfall exhibit variability that follows topographic differences. Future urban climate change projections of urban heat island formation under A2 and B2 emission scenarios show that the nocturnal UHI will be intense in winter or dry season episodes in the city. The highest urban warming is from October to December (2.5 °C to 3.2 °C) during 2050s and 2080s.

Study on the Characteristics and Impacts of the Spatial-temporal Urban Sprawl in Chinese Coastal Cities using Ocelet

NASA Astrophysics Data System (ADS)

Li, M.; Lo Seen, D.; Zhang, Z.

2015-12-01

The urban population is expected to rise 67% in developing countries and 86% in developed regions by 2050. As the most populous country in the world, China has been experiencing a remarkable urbanization process since the initialization of the reform and opening-up policies in the late 1970s. During the past several decades, the coastal zone undergone the highest urbanization and motst rapid economic development in China. Accurately understanding the characteristics of the spatial-temporal urban sprawl is helpful for urban planning on optimal land use in the future. Ocelet is an interactive visual interpretation and dynamic coding method that has been designed for studying issues related to space, time and multiple scales that are raised when dynamic landscapes are modelled. Using Ocelet, we aim to study the characteristics of the spatial-temporal urban sprawl in thirteen major Chinese coastal cities and how urban sprawl affects the surrounding land changes. Landsat MSS/TM/ETM/OLI, the China-Brazil Earth Resources Satellite (CBERS) and Chinese HJ-1A data are adopted to acquire urban built-up areas and their dynamic changes from 1979 to 2013. The results show that the urban built-up area increased gradually from 1979 to 2002 (~105 km²/yr), then accelerated about four times from 2002 to 2010 (~396 km²/yr) in thirteen major Chinese coastal cities. Although the expansion slowed down since 2010, the urban built-up area still increased at a fairly high rate (~210 km²/yr) from 2010 to 2013. The urban sprawl speed and pattern in each coastal city has also been analyzed, and has been grouped in three costal zones geographically. As a result of urban sprawl, large areas of arable land, rural settlements and forests were lost in these coastal cities. The lost non-urban land types and areas are different in the three costal zones and quantified respectively.

Design for approaching Cicada-wing reflectance in low- and high-index biomimetic nanostructures.

PubMed

Huang, Yi-Fan; Jen, Yi-Jun; Chen, Li-Chyong; Chen, Kuei-Hsien; Chattopadhyay, Surojit

2015-01-27

Natural nanostructures in low refractive index Cicada wings demonstrate ≤ 1% reflectance over the visible spectrum. We provide design parameters for Cicada-wing-inspired nanotip arrays as efficient light harvesters over a 300-1000 nm spectrum and up to 60° angle of incidence in both low-index, such as silica and indium tin oxide, and high-index, such as silicon and germanium, photovoltaic materials. Biomimicry of the Cicada wing design, demonstrating gradient index, onto these material surfaces, either by real electron cyclotron resonance microwave plasma processing or by modeling, was carried out to achieve a target reflectance of ∼ 1%. Design parameters of spacing/wavelength and length/spacing fitted into a finite difference time domain model could simulate the experimental reflectance values observed in real silicon and germanium or in model silica and indium tin oxide nanotip arrays. A theoretical mapping of the length/spacing and spacing/wavelength space over varied refractive index materials predicts that lengths of ∼ 1.5 μm and spacings of ∼ 200 nm in high-index and lengths of ∼ 200-600 nm and spacings of ∼ 100-400 nm in low-index materials would exhibit ≤ 1% target reflectance and ∼ 99% optical absorption over the entire UV-vis region and angle of incidence up to 60°.

The Effect of Maternal Death on the Health of the Husband and Children in a Rural Area of China: A Prospective Cohort Study.

PubMed

Zhou, Hong; Zhang, Long; Ye, Fang; Wang, Hai-Jun; Huntington, Dale; Huang, Yanjie; Wang, Anqi; Liu, Shuiqing; Wang, Yan

2016-01-01

To examine the effects of maternal death on the health of the index child, the health and educational attainment of the older children, and the mental health and quality of life of the surviving husband. A cohort study including 183 households that experienced a maternal death matched to 346 households that experienced childbirth but not a maternal death was conducted prospectively between June 2009 and October 2011 in rural China. Data on household sociodemographic characteristics, physical and mental health were collected using a quantitative questionnaire and medical examination at baseline and follow-up surveys. Multivariate linear regression, logistic regression models and difference-in-difference (DID) were used to compare differences of outcomes between two groups. The index children who experienced the loss of a mother had a significantly higher likelihood of dying, abandonment and malnutrition compared to children whose mothers survived at the follow-up survey. The risk of not attending school on time and dropping out of school among older children in the affected group was higher than those in the control group during the follow-up. Husbands whose wife died had significantly lower EQ-5D index and EQ-VAS both at baseline and at follow-up surveys compared to those without experiencing a wife's death, suggesting an immediate and sustained poorer mental health quality of life among the surviving husbands. Also the prevalence of posttraumatic stress disorder (PTSD) was 72.6% at baseline and 56.2% at follow-up among husbands whose wife died. Maternal death has multifaceted and spillover effects on the physical and mental health of family members that are sustained over time. Programmes that reduce maternal mortality will mitigate repercussions on surviving family members are critical and needed.

CFD study on the effects of boundary conditions on air flow through an air-cooled condenser

NASA Astrophysics Data System (ADS)

Sumara, Zdeněk; Šochman, Michal

2018-06-01

This study focuses on the effects of boundary conditions on effectiveness of an air-cooled condenser (ACC). Heat duty of ACC is very often calculated for ideal uniform velocity field which does not correspond to reality. Therefore, this study studies the effect of wind and different landscapes on air flow through ACC. For this study software OpenFOAM was used and the flow was simulated with the use of RANS equations. For verification of numerical setup a model of one ACC cell with dimensions of platform 1.5×1.5 [m] was used. In this experiment static pressures behind fan and air flows through a model of surface of condenser for different rpm of fan were measured. In OpenFOAM software a virtual clone of this experiment was built and different meshes, turbulent models and numerical schemes were tested. After tuning up numerical setup virtual model of real ACC system was built. Influence of wind, landscape and height of ACC on air flow through ACC has been investigated.

A global fingerprint of macro-scale changes in urban structure from 1999 to 2009

NASA Astrophysics Data System (ADS)

Frolking, Steve; Milliman, Tom; Seto, Karen C.; Friedl, Mark A.

2013-06-01

Urban population now exceeds rural population globally, and 60-80% of global energy consumption by households, businesses, transportation, and industry occurs in urban areas. There is growing evidence that built-up infrastructure contributes to carbon emissions inertia, and that investments in infrastructure today have delayed climate cost in the future. Although the United Nations statistics include data on urban population by country and select urban agglomerations, there are no empirical data on built-up infrastructure for a large sample of cities. Here we present the first study to examine changes in the structure of the world’s largest cities from 1999 to 2009. Combining data from two space-borne sensors—backscatter power (PR) from NASA’s SeaWinds microwave scatterometer, and nighttime lights (NL) from NOAA’s defense meteorological satellite program/operational linescan system (DMSP/OLS)—we report large increases in built-up infrastructure stock worldwide and show that cities are expanding both outward and upward. Our results reveal previously undocumented recent and rapid changes in urban areas worldwide that reflect pronounced shifts in the form and structure of cities. Increases in built-up infrastructure are highest in East Asian cities, with Chinese cities rapidly expanding their material infrastructure stock in both height and extent. In contrast, Indian cities are primarily building out and not increasing in verticality. This new dataset will help characterize the structure and form of cities, and ultimately improve our understanding of how cities affect regional-to-global energy use and greenhouse gas emissions.

Autonomy-How much is too much

DTIC Science & Technology

2007-06-22

throughout the ages Hero of Alexandria designed a number of water- and air-powered automata[3][4] Leonardo da Vinci designed and built a number...Verlag, 2006. [6] Benedict Sweeney. “Leonardo’s Hands.” http://www.leonardoshands.com/artman2/publish/ leonardos - robot-knight/index.shtml [7] Peter

Validation of Sleep-Tracking Technology Compared with Polysomnography in Adolescents

PubMed Central

de Zambotti, Massimiliano; Baker, Fiona C.; Colrain, Ian M.

2015-01-01

Study Objectives: To evaluate the accuracy in measuring nighttime sleep of a fitness tracker (Jawbone UP) compared to polysomnography (PSG). Design: Jawbone UP and PSG data were simultaneously collected from adolescents during an overnight laboratory recording. Agreements between Jawbone UP and PSG sleep outcomes were analyzed using paired t tests and Bland-Altman plots. Multiple regressions were used to investigate which PSG sleep measures predicted Jawbone UP “Sound sleep” and “Light sleep.” Setting: SRI International Human Sleep Laboratory. Participants: Sixty-five healthy adolescents (28 females, mean age ± standard deviation [SD]: 15.8 ± 2.5 y). Interventions: N/A. Measurements and Results: Outcomes showed good agreements between Jawbone UP and PSG for total sleep time (mean differences ± SD: −10.0 ± 20.5 min), sleep efficiency (mean differences ± SD: −1.9 ± 4.2 %), and wake after sleep onset (WASO) (mean differences ± SD: 10.6 ± 14.7 min). Overall, Jawbone UP overestimated PSG total sleep time and sleep efficiency and underestimated WASO but differences were small and, on average, did not exceed clinically meaningful cutoffs of > 30 min for total sleep time and > 5% for sleep efficiency. Multiple regression models showed that Jawbone UP “Sound sleep” measure was predicted by PSG time in N2 (β = 0.25), time in rapid eye movement (β = 0.29), and arousal index (β = −0.34). Jawbone UP “Light sleep” measure was predicted by PSG time in N2 (β = 0.48), time in N3 (β = 0.49), arousal index (β = 0.38) and awakening index (β = 0.28). Jawbone UP showed a progression from slight overestimation to underestimation of total sleep time and sleep efficiency with advancing age. All relationships were similar in boys and girls. Conclusions: Jawbone UP shows good agreement with polysomnography in measures of total sleep time and wake after sleep onset in adolescent boys and girls. Further validation is needed in other age groups and clinical populations before advocating use of these inexpensive and easy-to-use devices in clinical sleep medicine and research. Citation: de Zambotti M, Baker FC, Colrain IM. Validation of sleep-tracking technology compared with polysomnography in adolescents. SLEEP 2015;38(9):1461–1468. PMID:26158896

Urban forms, physical activity and body mass index: a cross-city examination using ISS Earth Observation photographs

NASA Technical Reports Server (NTRS)

Lin, Ge

2005-01-01

Johnson Space Center has archived thousands of astronauts acquired Earth images. Some spectacular images have been widely used in news media and in k-12 class room, but their potential utilizations in health promotion and disease prevention have relatively untapped. The project uses daytime ISS photographs to define city forms and links them to city or metropolitan level health data in a multicity context. Road connectivity, landuse mix and Shannon's information indices were used in the classification of photographs. In contrast to previous remote-sensing studies, which tend to focus on a single city or a portion of a city, this project utilized photographs of 39 U.S. cities. And in contrast to previous health-promotion studies on the built environment, which tend to rely on survey respondents' responses to evaluate road connectivity or mixed land use for a single study site, the project examined the built environments of multiple cities based on ISS photos. It was found that road connectivity and landuse mix were not statistically significant by themselves, but the composite measure of the Shannon index was significantly associated with physical activity, but not BMI. Consequently, leisure-time physical activity seems to be positively associated with the urban complexity scale. It was also concluded that unless they are planned or designed in advance, photographs taken by astronauts generally are not appropriate for a study of a single-site built environment nor are they appropriate for a study of infectious diseases at a local scale. To link urban built environment with city-wide health indicators, both the traditional nadir view and oblique views should be emphasized in future astronauts' earth observation photographs.

Building a Terabyte Memory Bandwidth Compute Node with Four Consumer Electronics GPUs

NASA Astrophysics Data System (ADS)

Omlin, Samuel; Räss, Ludovic; Podladchikov, Yuri

2014-05-01

GPUs released for consumer electronics are generally built with the same chip architectures as the GPUs released for professional usage. With regards to scientific computing, there are no obvious important differences in functionality or performance between the two types of releases, yet the price can differ up to one order of magnitude. For example, the consumer electronics release of the most recent NVIDIA Kepler architecture (GK110), named GeForce GTX TITAN, performed equally well in conducted memory bandwidth tests as the professional release, named Tesla K20; the consumer electronics release costs about one third of the professional release. We explain how to design and assemble a well adjusted computer with four high-end consumer electronics GPUs (GeForce GTX TITAN) combining more than 1 terabyte/s memory bandwidth. We compare the system's performance and precision with the one of hardware released for professional usage. The system can be used as a powerful workstation for scientific computing or as a compute node in a home-built GPU cluster.

Combined laser-ray tracing and OCT system for biometry of the crystalline lens (Conference Presentation)

NASA Astrophysics Data System (ADS)

Ruggeri, Marco; Maceo Heilman, Bianca M.; Yao, Yue; Chang, Yu-Cherng; Gonzalez, Alex; Rowaan, Cornelis; Mohamed, Ashik; Williams, Siobhan; Durkee, Heather A.; Silgado, Juan; Bernal, Andres; Arrieta-Quintero, Esdras; Ho, Arthur; Parel, Jean-Marie A.; Manns, Fabrice

2017-02-01

Age-related changes in the crystalline lens shape and refractive index gradient produce changes in dioptric power and high-order aberrations that influence the optics of the whole eye and contribute to a decrease in overall visual quality. Despite their key role, the changes in lens shape and refractive index gradient with age and accommodation and their effects on high-order aberrations are still not well understood. The goal of this project was to develop a combined laser ray tracing (LRT) and optical coherence tomography (OCT) system to measure high-order aberrations, shape and refractive index gradient in non-human primate and human lenses. A miniature motorized lens stretching system was built to enable imaging and aberrometry of the lens during simulated accommodation. A positioning system was also built to enable on- and off-axis OCT imaging and aberrometry for characterization of the peripheral defocus of the lens. We demonstrated the capability of the LRT-OCT system to produce OCT images and aberration measurements of crystalline lens with age and accommodation in vitro. In future work, the information acquired with the LRT-OCT system will be used to develop an accurate age-dependent lens model to predict the role of the lens in the development of refractive error and aberrations of the whole eye.

Local descriptive norms for overweight/obesity and physical inactivity, features of the built environment, and 10-year change in glycosylated haemoglobin in an Australian population-based biomedical cohort.

PubMed

Carroll, Suzanne J; Paquet, Catherine; Howard, Natasha J; Coffee, Neil T; Taylor, Anne W; Niyonsenga, Theo; Daniel, Mark

2016-10-01

Descriptive norms vary between places. Spatial variation in health-related descriptive norms may predict individual-level health outcomes. Such relationships have rarely been investigated. This study assessed 10-year change in glycosylated haemoglobin (HbA1c) in relation to local descriptive norms for overweight/obesity (n = 1890) and physical inactivity (n = 1906) in models accounting for features of the built environment. HbA1c was measured three times over 10 years for a population-based biomedical cohort of adults in Adelaide, South Australia. Environmental exposures were expressed for cohort participants using 1600 m road-network buffers centred on participants' residential address. Local descriptive norms (prevalence of overweight/obesity [body mass index ≥25 kg/m(2)] and of physical inactivity [<150 min/week]) were aggregated from responses to a separate geocoded population survey. Built environment measures were public open space (POS) availability (proportion of buffer area) and walkability. Separate sets of multilevel models analysed different predictors of 10-year change in HbA1c. Each model featured one local descriptive norm and one built environment variable with area-level education and individual-level covariates (age, sex, employment status, education, marital status, and smoking status). Interactions between local descriptive norms and built environment measures were assessed. HbA1c increased over time. POS availability and local descriptive norms for overweight/obesity and physical inactivity were each associated with greater rates of HbA1c increase. Greater walkability was associated with a reduced rate of HbA1c increase, and reduced the influence of the overweight/obesity norm on the rate of increase in HbA1c. Local descriptive health-related norms and features of the built environment predict 10-year change in HbA1c. The impact of local descriptive norms can vary according to built environment features. Little researched thus far, local descriptive norms may play an important role in the evolution of HbA1c and thus cardiometabolic risk, over time. Further empirical research on local descriptive norms is necessary to understand how residential environments shape chronic disease risk. Copyright © 2016 Elsevier Ltd. All rights reserved.

The community distribution of bacteria and fungi on ancient wall paintings of the Mogao Grottoes

PubMed Central

Ma, Yantian; Zhang, He; Du, Ye; Tian, Tian; Xiang, Ting; Liu, Xiande; Wu, Fasi; An, Lizhe; Wang, Wanfu; Gu, Ji-Dong; Feng, Huyuan

2015-01-01

In this study, we compared the microbial communities colonising ancient cave wall paintings of the Mogao Grottoes exhibiting signs of biodeterioration. Ten samples were collected from five different caves built during different time periods and analysed using culture-independent and culture-dependent methods. The clone library results revealed high microbial diversity, including the bacterial groups Firmicutes, Proteobacteria, Actinobacteria, Acidobacteria, Cyanobacteria, Bacteroidetes, Gemmatimonadetes, Planctomycetes, and Chloroflexi and the fungal groups Euascomycetes, Dothideomycetes, Eurotiomycetes, Sordariomycetes, Saccharomycetes, Plectomycetes, Pezizomycetes, Zygomycota, and Basidiomycota. The bacterial community structures differed among the samples, with no consistent temporal or spatial trends. However, the fungal community diversity index correlated with the building time of the caves independent of environmental factors (e.g., temperature or relative humidity). The enrichment cultures revealed that many culturable strains were highly resistant to various stresses and thus may be responsible for the damage to cave paintings in the Mogao Grottoes. PMID:25583346

The community distribution of bacteria and fungi on ancient wall paintings of the Mogao Grottoes.

PubMed

Ma, Yantian; Zhang, He; Du, Ye; Tian, Tian; Xiang, Ting; Liu, Xiande; Wu, Fasi; An, Lizhe; Wang, Wanfu; Gu, Ji-Dong; Feng, Huyuan

2015-01-13

In this study, we compared the microbial communities colonising ancient cave wall paintings of the Mogao Grottoes exhibiting signs of biodeterioration. Ten samples were collected from five different caves built during different time periods and analysed using culture-independent and culture-dependent methods. The clone library results revealed high microbial diversity, including the bacterial groups Firmicutes, Proteobacteria, Actinobacteria, Acidobacteria, Cyanobacteria, Bacteroidetes, Gemmatimonadetes, Planctomycetes, and Chloroflexi and the fungal groups Euascomycetes, Dothideomycetes, Eurotiomycetes, Sordariomycetes, Saccharomycetes, Plectomycetes, Pezizomycetes, Zygomycota, and Basidiomycota. The bacterial community structures differed among the samples, with no consistent temporal or spatial trends. However, the fungal community diversity index correlated with the building time of the caves independent of environmental factors (e.g., temperature or relative humidity). The enrichment cultures revealed that many culturable strains were highly resistant to various stresses and thus may be responsible for the damage to cave paintings in the Mogao Grottoes.

Comparison between goal programming and cointegration approaches in enhanced index tracking

NASA Astrophysics Data System (ADS)

Lam, Weng Siew; Jamaan, Saiful Hafizah Hj.

2013-04-01

Index tracking is a popular form of passive fund management in stock market. Passive management is a buy-and-hold strategy that aims to achieve rate of return similar to the market return. Index tracking problem is a problem of reproducing the performance of a stock market index, without purchasing all of the stocks that make up the index. This can be done by establishing an optimal portfolio that minimizes risk or tracking error. An improved index tracking (enhanced index tracking) is a dual-objective optimization problem, a trade-off between maximizing the mean return and minimizing the tracking error. Enhanced index tracking aims to generate excess return over the return achieved by the index. The objective of this study is to compare the portfolio compositions and performances by using two different approaches in enhanced index tracking problem, which are goal programming and cointegration. The result of this study shows that the optimal portfolios for both approaches are able to outperform the Malaysia market index which is Kuala Lumpur Composite Index. Both approaches give different optimal portfolio compositions. Besides, the cointegration approach outperforms the goal programming approach because the cointegration approach gives higher mean return and lower risk or tracking error. Therefore, the cointegration approach is more appropriate for the investors in Malaysia.

From the Ground Up: Art in American Built Environment Education.

ERIC Educational Resources Information Center

Guilfoil, Joanne K.

2000-01-01

Provides a case for teaching children about local architecture. Describes a specific example called the Kentucky Project as a humanist approach to built environmental education that enabled middle and high school students to study their architectural heritage through a program of videos and related teaching materials. (CMK)

Geographic variation in the relationship between body mass index and the built environment.

PubMed

Adachi-Mejia, Anna M; Lee, Chanam; Lee, Chunkuen; Carlos, Heather A; Saelens, Brian E; Berke, Ethan M; Doescher, Mark P

2017-07-01

Studies examining associations between weight status and neighborhood built environment (BE) have shown inconsistent results and have generally focused on urban settings. However, many Americans do not live in metropolitan areas and BE impacts may be different outside of metropolitan areas. We sought to examine whether the relationship between body mass index (BMI) and neighborhood BE exists and varies by geographic region across small towns in the United States. We conducted telephone surveys with 2156 adults and geographic information systems data in nine towns located within three geographic regions (Northeast, Texas, Washington) in 2011 and 2012. Multiple regression models examined the relationship between individual BMI and BE measures. Most physical activity variables were significantly associated with lower BMI in all geographic regions. We saw variation across geographic region in the relationship between characteristics of the BE variables and BMI. Some perceived and objectively-measured characteristics of the BE were significantly associated with adult BMI, but significant relationships varied by geographic region. For example, in the Northeast, perceived attractiveness of the neighborhood as a reason for why they chose to live there was associated with lower BMI; in Texas, the perceived presence of a fast food restaurant was negatively associated with BMI; in Washington, perceived presence of trees along the streets was associated with lower BMI. Our findings suggest that regional variation plays a role in the relationship between adult BMI and BE characteristics in small towns. Regardless of geographic location, interventions should encourage utilitarian walking and other forms of physical activity. Copyright © 2017 Elsevier Inc. All rights reserved.

Explaining negative refraction without negative refractive indices.

PubMed

Talalai, Gregory A; Garner, Timothy J; Weiss, Steven J

2018-03-01

Negative refraction through a triangular prism may be explained without assigning a negative refractive index to the prism by using array theory. For the case of a beam incident upon the wedge, the array theory accurately predicts the beam transmission angle through the prism and provides an estimate of the frequency interval at which negative refraction occurs. The hypotenuse of the prism has a staircase shape because it is built of cubic unit cells. The large phase delay imparted by each unit cell, combined with the staircase shape of the hypotenuse, creates the necessary conditions for negative refraction. Full-wave simulations using the finite-difference time-domain method show that array theory accurately predicts the beam transmission angle.

The Improbable State: The Prospects for a Developmental Turn in North Korea

DTIC Science & Technology

2014-09-01

more developed than South Korea. During the Japanese occupation, North Korea was built up with the most modern industrial complex in East Asia. When...political economy as Chalmers Johnson’s writings on the developmental state. Originally written in 1982, his book MITI and the Japanese Miracle...initially coined the phrase “ Japanese developmental state.”14 His argument was essentially that Japan’s system was fundamentally different from either the

A City and National Metric measuring Isolation from the Global Market for Food Security Assessment

NASA Technical Reports Server (NTRS)

Brown, Molly E.; Silver, Kirk Coleman; Rajagopalan, Krishnan

2013-01-01

The World Bank has invested in infrastructure in developing countries for decades. This investment aims to reduce the isolation of markets, reducing both seasonality and variability in food availability and food prices. Here we combine city market price data, global distance to port, and country infrastructure data to create a new Isolation Index for countries and cities around the world. Our index quantifies the isolation of a city from the global market. We demonstrate that an index built at the country level can be applied at a sub-national level to quantify city isolation. In doing so, we offer policy makers with an alternative metric to assess food insecurity. We compare our isolation index with other indices and economic data found in the literature.We show that our Index measures economic isolation regardless of economic stability using correlation and analysis

What tools do we have to study the morphological effects of hydroelectric plants in developing countries? The Chilean case

NASA Astrophysics Data System (ADS)

Alcayaga, Hernan; Caamaño, Diego; Palma, Sebastian; Contreras, Karla

2017-04-01

Countries growing rates are directly related to energy production. Therefore, developed and developing nations are focused on hydropower and dam construction; on the contrary dam removal practices are significantly different among nations, demonstrating the former group a lesser interest on removing structures. Chiles hydropower generation corresponds to 50% of the current grid, having a potential capacity to double the current situation. Thus: ¿What tools can we apply to assess the potential impacts on our rivers? The goal of this project is to study two different reaches located in two separates streams in Central Chile. The Aconcagua River represents a mountain stream (i.e. steep, narrow, and confined) subject to the operation of a hydroelectric system composed by five diversion hydropower plants built during the 90`s. The Rapel River reach corresponds to the last 10km upstream to the outlet; it is a mild and wide stream that includes the gravel-sand transition. The Rapel dam operates about 25km upstream this second reach that is characterized by an 112m wall built in 1968. The Aconcagua hydropower system was characterized within a GIS environment and a morphological response conceptual model applied. The model uses two indexes to evaluate changes in i) channel forming discharge and ii) sediment supply. The provided response shows the trends and magnitudes of the changes, based in eighth possible directions for ten morphological responsible variables. The Rapel river system was evaluated differently and sampling of sediments characteristics (D50 and armour index), discharge index for both before and after the dam operation, Morphological Quality Index (IQM) and an analysis of aerial photography time series were performed. Results showed that the hydrology indicator impacts for the Aconcagua system were more severe than the impacts on sediments transport (typically the case for diversion type hydropower). A fine armour layer was found within the Rapel river site, also the IQM method classified it as poor quality, and the analysis of aerial photos showed three areas with significant changes in sinuosity. Although, both reaches indicated aggradation, attenuation in width, and an increment in slope. The amount and the quality of the available data on both reaches allowed assessing the basic morphological changes for the current rivers morphological stage. The next step is to transfer these methods and results to other systems that lack of these level of information, thus we could somehow diagnose and quantify impacts before the construction of the structure, and not as it is done today that impacts are not corrected within the project, but mitigated once the dam is in place and operating.

Comparison of the shock absorption capacities of different mouthguards.

PubMed

Bochnig, Melina Simonetta; Oh, Min-Jung; Nagel, Theresa; Ziegler, Fred; Jost-Brinkmann, Paul-Georg

2017-06-01

In this in vitro study, the protective qualities of different mouthguard types were examined during small hard object collisions. The aim was to investigate inconclusive aspects of hard inserts, nylon nets, and air spaces as reinforcements in the anterior region and the protection qualities of ethylene vinyl acetate (EVA). Five different mouthguards with a labial thickness between 2 mm and 11 mm made of materials of varying stiffness were investigated. As a negative control, the same experiments were performed without a mouthguard. Different combinations of EVA and labial inserts ((polyethylene terephthalate glycol-modified [PETG]), nylon mesh, air space) were tested. Using a stainless steel pendulum device, blows of different energy (0.07-2.85 joules) were applied to the center of the crown of a pivoted tooth in a custom-built jaw model. A laser Doppler vibrometer measured the tooth deflection, while an acceleration sensor attached to the pendulum measured the braking accelerations. Tooth deflection was reduced up to 99.7% compared to no mouthguard, and the braking acceleration was reduced up to 72.2% by increasing the mouthguards' labial thickness in combination with labial inserts of different stiffness and a built-in air space between the front teeth and the mouthguard. The mouthguards made of soft materials (EVA with nylon mesh) showed slightly better protection qualities than the more rigid mouthguards of similar thickness (PETG; P<.05). However, with increasing impact energy, their protective capacities decreased to a greater extent than the stiffer mouthguards. The combination of increased labial thickness and labial inserts of varying stiffness and eventually an air space offers the best protection capacities for hard, small object collisions. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Characterization of the near-term electric vehicle (ETV-1) breadboard propulsion system over the SAE J227a driving schedule D

NASA Technical Reports Server (NTRS)

Sargent, N. B.; Dustin, M. O.

1981-01-01

The electric test vehicle one (ETV-1) was built from the ground up with present state of the art technology. Two vehicles were built and are presently being evaluated by NASA's Jet Propulsion Laboratory (JPL). A duplicate set of propulsion system components was built, mounted on a breadboard, and delivered to NASA's Lewis Research Center for testing on the road load simulator (RLS). Driving cycle tests completed on the system are described.

A dictionary based informational genome analysis

PubMed Central

2012-01-01

Background In the post-genomic era several methods of computational genomics are emerging to understand how the whole information is structured within genomes. Literature of last five years accounts for several alignment-free methods, arisen as alternative metrics for dissimilarity of biological sequences. Among the others, recent approaches are based on empirical frequencies of DNA k-mers in whole genomes. Results Any set of words (factors) occurring in a genome provides a genomic dictionary. About sixty genomes were analyzed by means of informational indexes based on genomic dictionaries, where a systemic view replaces a local sequence analysis. A software prototype applying a methodology here outlined carried out some computations on genomic data. We computed informational indexes, built the genomic dictionaries with different sizes, along with frequency distributions. The software performed three main tasks: computation of informational indexes, storage of these in a database, index analysis and visualization. The validation was done by investigating genomes of various organisms. A systematic analysis of genomic repeats of several lengths, which is of vivid interest in biology (for example to compute excessively represented functional sequences, such as promoters), was discussed, and suggested a method to define synthetic genetic networks. Conclusions We introduced a methodology based on dictionaries, and an efficient motif-finding software application for comparative genomics. This approach could be extended along many investigation lines, namely exported in other contexts of computational genomics, as a basis for discrimination of genomic pathologies. PMID:22985068

Environmental quality impact on human mortality and its spatial variations in the contiguous United States 2000-2005

EPA Science Inventory

Assessing the cumulative effects of multiple environmental factors that influence mortality remains a challenging task. This study used the Environmental Quality Index (EQI), and its five domain indices (air, water, land, built and sociodemographic) as a measure of cumulative env...

A US Human Wellbeing Index (HWBI) for evaluating the influence of economic, social and ecological service flows

EPA Science Inventory

The overarching goal of USEPA’s Sustainable and Healthy Communities Research Program (SHCRP) is to inform and empower decision makers to equitably weigh and integrate human health, socio-economic, environmental, and ecological factors to foster sustainability in the built and nat...

Domains of environmental quality are differentially associated with adverse birth outcomes by levels of urban-rural status

EPA Science Inventory

Human health is affected by exposures operating from multiple domains across level of urbanicity. To accommodate this, we constructed an environmental quality index(EQI) using data from five domains (air, water, land, built, sociodemographic) for each United States (U.S.) county;...

Conceptualizing Holistic Community Resilience to Climate Events: Foundation for a Climate Resilience Screening Index

EPA Science Inventory

The concept of resilience has been evolving over the past decade as a way to address the current and future challenges nations, states, and cities face from a changing climate. Understanding how the environment (natural and built), climate event risk, societal interactions, and g...

Animation: What makes up the Space Launch System’s massive core stage

NASA Image and Video Library

2017-04-24

NASA’s new rocket, the Space Launch System, will be the most powerful rocket ever built for deep-space missions. The 212-foot core stage is the largest rocket stage ever built and will fuel four RS-25 engines that will help launch SLS. This animation depicts the parts that make up the core stage and how these parts will be joined to form the entire stage. The five major parts include: the engine section, the hydrogen tank, the intertank, the liquid oxygen tank and the forward skirt.

Comparative analysis of a jack-up drilling unit with different leg systems

NASA Astrophysics Data System (ADS)

Ren, Xiangang; Bai, Yong; Jia, Lusheng

2012-09-01

The jack-up unit is one of the best drilling platforms in offshore oil fields with water depth shallower than 150 meters. As the most pivotal component of the jack-up unit, the leg system can directly affect the global performance of a jack-up unit. Investigation shows that there are three kinds of leg structure forms in the world now: the reverse K, X, and mixing types. In order to clarify the advantage and defects of each one, as well as their effect on the global performance of the jack-up unit, this paper commenced to study performance targets of a deepwater jack-up unit with different leg systems (X type, reverse K type, and mixing type). In this paper a typical leg scantling dimension and identical external loads were selected, detailed finite element snalysis (FEA) models were built to simulate the jack-up unit's structural behavior, and the multi-point constraint (MPC) element together with the spring element was used to deal with the boundary condition. Finally, the above problems were solved by comparative analysis of their main performance targets (including ultimate static strength, dynamic response, and weight).

Ecohydrological Responses to Hurricane Harvey across South-Central Texas a Multidisciplinary Approach of the Texas Water Observatory

NASA Astrophysics Data System (ADS)

Jaimes, A.; Gaur, N.; Aparecido, L. M. T.; Everett, M. E.; Knappett, P.; Lawing, M.; Majumder, S.; Miller, G. R.; Moore, G. W.; Morgan, C.; Mitra, B.; Noormets, A.; Mohanty, B.

2017-12-01

The unprecedented destructive hurricane Harvey struck eastern Texas from August 25th to 29th, 2017. As the hurricane moved through the region, it dropped the equivalent of one year of precipitation within a five-day period, with peak accumulations near 165 cm. Rainfall intensity and distribution varied across the region but Harris County and portions of the lower Brazos River Basin experienced devastating flooding due to high run-off and water accumulation in the built-up area. In this study, we use a multidisciplinary approach to quantify the dynamics of carbon and water flux at different spatiotemporal resolution across land types both in and outside of the path of hurricane Harvey using a combination of remote sensing and fixed monitoring platforms of the Texas Water Observatory (TWO). We used LANDSAT imagery to compute Soil Adjusted Vegetation Index, Enhanced Vegetation Index, and Normalized Difference Moisture Index. MODIS ET, GPP, and sap flow data were used in combination with eddy covariance and meteorological data from seven sites of the TWO representative of biomes ranging from low tidal salt marsh of the Gulf Coastal Plain, Shrubland, Improved Pasture, Mixed and Native Prairies, and Crop sites. We hypothesize alteration in ecohydrological characteristics across land types, which were in the path of hurricane due to changes in vegetation structure. Specifically we used trend analysis to detect structural changes in temporal dynamics of sap flow, ET, and carbon to pulse response. In addition, we monitored trace metal concentration of soil and water pores before and immediately after the hurricane in order to predict the potential of any of the toxic metal (loid)s being mobilized in the natural water resources as a function of the changes in the redox gradient. Preliminary results indicated that tree water use was reduced on average 30% below normal days. Porewater concentration of some of the metal (loid) concentration increased (Fe, Mn, Co, As, Sb, Pb) from pre- to post-hurricane scenario. Overall, the integrative approach adopted by TWO in evaluating the impact of Hurricane Harvey on ecosystem structure and function has the potential to provide the baseline information to manage and mitigate the effects of future events with similar characteristics.

OTDR fiber-optical chemical sensor system for detection and location of hydrocarbon leakage.

PubMed

Buerck, J; Roth, S; Kraemer, K; Mathieu, H

2003-08-15

A distributed sensing system for apolar hydrocarbons is presented which is built from a polymer-clad silica fiber adapted to an optical time domain reflectometer (OTDR) set-up. OTDR measurements allow locating and detecting chemicals by measuring the time delay between short light pulses entering the fiber and discrete changes in the backscatter signals that are caused by local extraction of hydrocarbons into the fiber cladding. The light guiding properties of the fiber are affected by interaction of the extracted chemicals with the evanescent wave light field extending into the fiber cladding. Distributed sensing of pure liquid hydrocarbons (HC) and aqueous HC solutions with a commercially available mini-OTDR adapted to sensing fibers of up to 1km length could be demonstrated. A pulsed laser diode emitting at the 850 nm telecommunication wavelength was applied in the mini-OTDR to locate the HCs by analyzing the step drop (light loss) in the backscatter signal, which is induced by local refractive index (RI) increase in the silicone cladding due to the extracted HC. The prototype instrument can be applied for monitoring hydrocarbon leakage in large technical installations, such as tanks, chemical pipelines or chemical waste disposal containments.

Building a Digital Library from the Ground Up: an Examination of Emergent Information Resources in the Machine Learning Community

NASA Astrophysics Data System (ADS)

Cunningham, Sally Jo

The current crop of digital libraries for the computing community are strongly grounded in the conventional library paradigm: they provide indexes to support searching of collections of research papers. As such, these digital libraries are relatively impoverished; the present computing digital libraries omit many of the documents and resources that are currently available to computing researchers, and offer few browsing structures. These computing digital libraries were built 'top down': the resources and collection contents are forced to fit an existing digital library architecture. A 'bottom up' approach to digital library development would begin with an investigation of a community's information needs and available documents, and then design a library to organize those documents in such a way as to fulfill the community's needs. The 'home grown', informal information resources developed by and for the machine learning community are examined as a case study, to determine the types of information and document organizations 'native' to this group of researchers. The insights gained in this type of case study can be used to inform construction of a digital library tailored to this community.

Zygosity Differences in Height and Body Mass Index of Twins From Infancy to Old Age: A Study of the CODATwins Project.

PubMed

Jelenkovic, Aline; Yokoyama, Yoshie; Sund, Reijo; Honda, Chika; Bogl, Leonie H; Aaltonen, Sari; Ji, Fuling; Ning, Feng; Pang, Zengchang; Ordoñana, Juan R; Sánchez-Romera, Juan F; Colodro-Conde, Lucia; Burt, S Alexandra; Klump, Kelly L; Medland, Sarah E; Montgomery, Grant W; Kandler, Christian; McAdams, Tom A; Eley, Thalia C; Gregory, Alice M; Saudino, Kimberly J; Dubois, Lise; Boivin, Michel; Tarnoki, Adam D; Tarnoki, David L; Haworth, Claire M A; Plomin, Robert; Öncel, Sevgi Y; Aliev, Fazil; Stazi, Maria A; Fagnani, Corrado; D'Ippolito, Cristina; Craig, Jeffrey M; Saffery, Richard; Siribaddana, Sisira H; Hotopf, Matthew; Sumathipala, Athula; Rijsdijk, Fruhling; Spector, Timothy; Mangino, Massimo; Lachance, Genevieve; Gatz, Margaret; Butler, David A; Bayasgalan, Gombojav; Narandalai, Danshiitsoodol; Freitas, Duarte L; Maia, José Antonio; Harden, K Paige; Tucker-Drob, Elliot M; Kim, Bia; Chong, Youngsook; Hong, Changhee; Shin, Hyun Jung; Christensen, Kaare; Skytthe, Axel; Kyvik, Kirsten O; Derom, Catherine A; Vlietinck, Robert F; Loos, Ruth J F; Cozen, Wendy; Hwang, Amie E; Mack, Thomas M; He, Mingguang; Ding, Xiaohu; Chang, Billy; Silberg, Judy L; Eaves, Lindon J; Maes, Hermine H; Cutler, Tessa L; Hopper, John L; Aujard, Kelly; Magnusson, Patrik K E; Pedersen, Nancy L; Aslan, Anna K Dahl; Song, Yun-Mi; Yang, Sarah; Lee, Kayoung; Baker, Laura A; Tuvblad, Catherine; Bjerregaard-Andersen, Morten; Beck-Nielsen, Henning; Sodemann, Morten; Heikkilä, Kauko; Tan, Qihua; Zhang, Dongfeng; Swan, Gary E; Krasnow, Ruth; Jang, Kerry L; Knafo-Noam, Ariel; Mankuta, David; Abramson, Lior; Lichtenstein, Paul; Krueger, Robert F; McGue, Matt; Pahlen, Shandell; Tynelius, Per; Duncan, Glen E; Buchwald, Dedra; Corley, Robin P; Huibregtse, Brooke M; Nelson, Tracy L; Whitfield, Keith E; Franz, Carol E; Kremen, William S; Lyons, Michael J; Ooki, Syuichi; Brandt, Ingunn; Nilsen, Thomas Sevenius; Inui, Fujio; Watanabe, Mikio; Bartels, Meike; van Beijsterveldt, Toos C E M; Wardle, Jane; Llewellyn, Clare H; Fisher, Abigail; Rebato, Esther; Martin, Nicholas G; Iwatani, Yoshinori; Hayakawa, Kazuo; Sung, Joohon; Harris, Jennifer R; Willemsen, Gonneke; Busjahn, Andreas; Goldberg, Jack H; Rasmussen, Finn; Hur, Yoon-Mi; Boomsma, Dorret I; Sørensen, Thorkild I A; Kaprio, Jaakko; Silventoinen, Karri

2015-10-01

A trend toward greater body size in dizygotic (DZ) than in monozygotic (MZ) twins has been suggested by some but not all studies, and this difference may also vary by age. We analyzed zygosity differences in mean values and variances of height and body mass index (BMI) among male and female twins from infancy to old age. Data were derived from an international database of 54 twin cohorts participating in the COllaborative project of Development of Anthropometrical measures in Twins (CODATwins), and included 842,951 height and BMI measurements from twins aged 1 to 102 years. The results showed that DZ twins were consistently taller than MZ twins, with differences of up to 2.0 cm in childhood and adolescence and up to 0.9 cm in adulthood. Similarly, a greater mean BMI of up to 0.3 kg/m2 in childhood and adolescence and up to 0.2 kg/m2 in adulthood was observed in DZ twins, although the pattern was less consistent. DZ twins presented up to 1.7% greater height and 1.9% greater BMI than MZ twins; these percentage differences were largest in middle and late childhood and decreased with age in both sexes. The variance of height was similar in MZ and DZ twins at most ages. In contrast, the variance of BMI was significantly higher in DZ than in MZ twins, particularly in childhood. In conclusion, DZ twins were generally taller and had greater BMI than MZ twins, but the differences decreased with age in both sexes.

Zygosity differences in height and body mass index of twins from infancy to old age: A study of the CODATwins project

PubMed Central

Jelenkovic, Aline; Yokoyama, Yoshie; Sund, Reijo; Honda, Chika; Bogl, Leonie H; Aaltonen, Sari; Ji, Fuling; Ning, Feng; Pang, Zengchang; Ordoñana, Juan R; Sánchez-Romera, Juan F; Colodro-Conde, Lucia; Burt, S Alexandra; Klump, Kelly L; Medland, Sarah E; Montgomery, Grant W; Kandler, Christian; McAdams, Tom A; Eley, Thalia C; Gregory, Alice M; Saudino, Kimberly J; Dubois, Lise; Boivin, Michel; Tarnoki, Adam D; Tarnoki, David L; Haworth, Claire MA; Plomin, Robert; Öncel, Sevgi Y; Aliev, Fazil; Stazi, Maria A; Fagnani, Corrado; D'Ippolito, Cristina; Craig, Jeffrey M; Saffery, Richard; Siribaddana, Sisira H; Hotopf, Matthew; Sumathipala, Athula; Rijsdijk, Fruhling; Spector, Timothy; Mangino, Massimo; Lachance, Genevieve; Gatz, Margaret; Butler, David A; Bayasgalan, Gombojav; Narandalai, Danshiitsoodol; Freitas, Duarte L; Maia, José Antonio; Harden, K Paige; Tucker-Drob, Elliot M; Kim, Bia; Chong, Youngsook; Hong, Changhee; Shin, Hyun Jung; Christensen, Kaare; Skytthe, Axel; Kyvik, Kirsten O; Derom, Catherine A; Vlietinck, Robert F; Loos, Ruth JF; Cozen, Wendy; Hwang, Amie E; Mack, Thomas M; He, Mingguang; Ding, Xiaohu; Chang, Billy; Silberg, Judy L; Eaves, Lindon J; Maes, Hermine H; Cutler, Tessa L; Hopper, John L; Aujard, Kelly; Magnusson, Patrik KE; Pedersen, Nancy L; Aslan, Anna K Dahl; Song, Yun-Mi; Yang, Sarah; Lee, Kayoung; Baker, Laura A; Tuvblad, Catherine; Bjerregaard-Andersen, Morten; Beck-Nielsen, Henning; Sodemann, Morten; Heikkilä, Kauko; Tan, Qihua; Zhang, Dongfeng; Swan, Gary E; Krasnow, Ruth; Jang, Kerry L; Knafo-Noam, Ariel; Mankuta, David; Abramson, Lior; Lichtenstein, Paul; Krueger, Robert F; McGue, Matt; Pahlen, Shandell; Tynelius, Per; Duncan, Glen E; Buchwald, Dedra; Corley, Robin P; Huibregtse, Brooke M; Nelson, Tracy L; Whitfield, Keith E; Franz, Carol E; Kremen, William S; Lyons, Michael J; Ooki, Syuichi; Brandt, Ingunn; Nilsen, Thomas Sevenius; Inui, Fujio; Watanabe, Mikio; Bartels, Meike; van Beijsterveldt, Toos CEM; Wardle, Jane; Llewellyn, Clare H; Fisher, Abigail; Rebato, Esther; Martin, Nicholas G; Iwatani, Yoshinori; Hayakawa, Kazuo; Sung, Joohon; Harris, Jennifer R; Willemsen, Gonneke; Busjahn, Andreas; Goldberg, Jack H; Rasmussen, Finn; Hur, Yoon-Mi; Boomsma, Dorret I; Sørensen, Thorkild IA; Kaprio, Jaakko; Silventoinen, Karri

2015-01-01

A trend towards greater body size in dizygotic (DZ) than in monozygotic (MZ) twins has been suggested by some but not all studies, and this difference may also vary by age. We analyzed zygosity differences in means and variances of height and body mass index (BMI) among male and female twins from infancy to old age. Data were derived from an international database of 54 twin cohorts participating in the CODATwins project and included 842,951 height and BMI measurements from age 1 to 102 years. The results showed that DZ twins were consistently taller than MZ twins, with differences of up to 2.0 cm in childhood and adolescence and up to 0.9 cm in adulthood. Likewise, a greater mean BMI of up to 0.3 kg/m2 in childhood and adolescence and up to 0.2 kg/m2 in adulthood was observed in DZ twins, although the pattern was less consistent. DZ twins presented up to 1.7% greater height and 1.9% greater BMI than MZ twins; these percentage differences were largest in middle and late childhood and decreased with age in both sexes. The variance of height was similar in MZ and DZ twins at most ages. In contrast the variance of BMI was significantly higher in DZ than in MZ twins particularly in childhood. In conclusion, DZ twins were generally taller and had greater BMI than MZ twins, but the differences decreased with age in both sexes. PMID:26337138

A Stream Multimetric Macroinvertebrate Index (MMI) for the Sand Hills Ecoregion of the Southeastern Plains, USA

NASA Astrophysics Data System (ADS)

Kosnicki, Ely; Sefick, Stephen A.; Paller, Michael H.; Jerrell, Miller S.; Prusha, Blair A.; Sterrett, Sean C.; Tuberville, Tracey D.; Feminella, Jack W.

2016-10-01

A macroinvertebrate multimetric index is an effective tool for assessing the biological integrity of streams. However, data collected under a single protocol may not be available for an entire region. We sampled macroinvertebrates from the full extent of the Sand Hills ecoregion Level IV of the Southeastern Plains with a standard protocol during the summers of 2010-2012. We evaluated the performance of 94 metrics through a series of screening criteria and built 48 macroinvertebrate multimetric indexs with combinations of the best performing metrics, representing richness, habit, functional feeding guild, sensitivity, and community composition. A series of narrative-response tests for each macroinvertebrate multimetric index was used to find the best performing macroinvertebrate multimetric index which we called the Sand Hills macroinvertebrate multimetric index. The Sand Hills macroinvertebrate multimetric index consisted of the measures Biotic Index, % Shredder taxa, Clinger taxa2/total taxa, Plecoptera and Trichoptera richness, and Tanytarsini taxa2/Chironomidae taxa. Comparison of the Sand Hills macroinvertebrate multimetric index with existing assessment tools calculated with our data indicated that the Sand Hills macroinvertebrate multimetric index performs at a high level with regard to identifying degraded sites and in its response to stress gradients.

Design and Manufacturing of Extremely Low Mass Flight Systems

NASA Technical Reports Server (NTRS)

Johnson, Michael R.

2002-01-01

Extremely small flight systems pose some unusual design and manufacturing challenges. The small size of the components that make up the system generally must be built with extremely tight tolerances to maintain the functionality of the assembled item. Additionally, the total mass of the system is extremely sensitive to what would be considered small perturbations in a larger flight system. The MUSES C mission, designed, built, and operated by Japan, has a small rover provided by NASA that falls into this small flight system category. This NASA-provided rover is used as a case study of an extremely small flight system design. The issues that were encountered with the rover portion of the MUSES C program are discussed and conclusions about the recommended mass margins at different stages of a small flight system project are presented.

Thermocouples calibration and analysis of the influence of the length of the sensor coating

NASA Astrophysics Data System (ADS)

Noriega, M.; Ramírez, R.; López, R.; Vaca, M.; Morales, J.; Terres, H.; Lizardi, A.; Chávez, S.

2015-01-01

This paper presents the design and construction of a lab prototype, with a much lower cost compared to the ones commercially sold, enabling the manufacture of thermocouples which are then calibrated to verify their functionality and acceptance. We also analyze the influence of the external insulation over the wires, to determine whether it influences temperature measurement. The tested lengths ranged from 0.00 m up to 0.030 m. The thermocouple was compared against the behavior of a thermocouple of the same type that was purchased with a commercial supplier. The obtained measurement showed less than 1 °C difference in some points. This makes the built thermocouple reliable, since the standard allows a difference of up to 2.2 °C.

The impact of forest roads on understory plant diversity in temperate hornbeam-beech forests of Northern Iran.

PubMed

Deljouei, Azade; Abdi, Ehsan; Marcantonio, Matteo; Majnounian, Baris; Amici, Valerio; Sohrabi, Hormoz

2017-08-01

Forest roads alter the biotic and abiotic components of ecosystems, modifying temperature, humidity, wind speed, and light availability that, in turn, cause changes in plant community composition and diversity. We aim at investigating and comparing the diversity of herbaceous species along main and secondary forest roads in a temperate-managed hornbeam-beech forest, north of Iran. Sixteen transects along main and secondary forest roads were established (eight transects along main roads and eight along secondary roads). To eliminate the effect of forest type, all transects were located in Carpinetum-Fagetum forests, the dominant forest type in the study area. The total length of each transect was 200 m (100 m toward up slope and 100 m toward down slope), and plots were established along it at different distances from road edge. The diversity of herbaceous plant species was calculated in each plot using Shannon-Wiener index, species richness, and Pielou's index. The results showed that diversity index decreased when distance from road edge increases. This decreasing trend continued up to 60 m from forest road margin, and after this threshold, the index slightly increased. Depending on the type of road (main or secondary) as well as cut or fill slopes, the area showing a statistical different plant composition and diversity measured through Shannon-Wiener, species richness, and Pielou's index is up to 10 m. The length depth of the road edge effect found in main and secondary forest roads was small, but it could have cumulative effects on forest microclimate and forest-associated biota at the island scale. Forest managers should account for the effect of road buildings on plant communities.

The influence of local effects on thermal sensation under non-uniform environmental conditions--gender differences in thermophysiology, thermal comfort and productivity during convective and radiant cooling.

PubMed

Schellen, L; Loomans, M G L C; de Wit, M H; Olesen, B W; van Marken Lichtenbelt, W D

2012-09-10

Applying high temperature cooling concepts, i.e. high temperature cooling (T(supply) is 16-20°C) HVAC systems, in the built environment allows the reduction in the use of (high quality) energy. However, application of high temperature cooling systems can result in whole body and local discomfort of the occupants. Non-uniform thermal conditions, which may occur due to application of high temperature cooling systems, can be responsible for discomfort. Contradictions in literature exist regarding the validity of the often used predicted mean vote (PMV) index for both genders, and the index is not intended for evaluating the discomfort due to non-uniform environmental conditions. In some cases, however, combinations of local and general discomfort factors, for example draught under warm conditions, may not be uncomfortable. The objective of this study was to investigate gender differences in thermophysiology, thermal comfort and productivity in response to thermal non-uniform environmental conditions. Twenty healthy subjects (10 males and 10 females, age 20-29 years) were exposed to two different experimental conditions: a convective cooling situation (CC) and a radiant cooling situation (RC). During the experiments physiological responses, thermal comfort and productivity were measured. The results show that under both experimental conditions the actual mean thermal sensation votes significantly differ from the PMV-index; the subjects are feeling colder than predicted. Furthermore, the females are more uncomfortable and dissatisfied compared to the males. For females, the local sensations and skin temperatures of the extremities have a significant influence on whole body thermal sensation and are therefore important to consider under non-uniform environmental conditions. Copyright © 2012 Elsevier Inc. All rights reserved.

Spatial heterogeneity and temporal evolution of malaria transmission risk in Dakar, Senegal, according to remotely sensed environmental data

PubMed Central

2010-01-01

Background The United Nations forecasts that by 2050, more than 60% of the African population will live in cities. Thus, urban malaria is considered an important emerging health problem in that continent. Remote sensing (RS) and geographic information systems (GIS) are useful tools for addressing the challenge of assessing, understanding and spatially focusing malaria control activities. The objectives of the present study were to use high spatial resolution SPOT (Satellite Pour l'Observation de la Terre) satellite images to identify some urban environmental factors in Dakar associated with Anopheles arabiensis densities, to assess the persistence of these associations and to describe spatial changes in at-risk environments using a decadal time scale. Methods Two SPOT images from the 1996 and 2007 rainy seasons in Dakar were processed to extract environmental factors, using supervised classification of land use and land cover, and a calculation of NDVI (Normalized Difference Vegetation Index) and distance to vegetation. Linear regressions were fitted to identify the ecological factors associated with An. arabiensis aggressiveness measured in 1994-97 in the South and centre districts of Dakar. Risk maps for populated areas were computed and compared for 1996 and 2007 using the results of the statistical models. Results Almost 60% of the variability in anopheline aggressiveness measured in 1994-97 was explained with only one variable: the built-up area in a 300-m radius buffer around the catching points. This association remained stable between 1996 and 2007. Risk maps were drawn by inverting the statistical association. The total increase of the built-up areas in Dakar was about 30% between 1996 and 2007. In proportion to the total population of the city, the population at high risk for malaria fell from 32% to 20%, whereas the low-risk population rose from 29 to 41%. Conclusions Environmental data retrieved from high spatial resolution SPOT satellite images were associated with An. arabiensis densities in Dakar urban setting, which allowed to generate malaria transmission risk maps. The evolution of the risk was quantified, and the results indicated there are benefits of urbanization in Dakar, since the proportion of the low risk population increased while urbanization progressed. PMID:20815867

Skin care education and individual counselling versus treatment as usual in healthcare workers with hand eczema: randomised clinical trial.

PubMed

Ibler, Kristina Sophie; Jemec, Gregor B E; Diepgen, Thomas L; Gluud, Christian; Lindschou Hansen, Jane; Winkel, Per; Thomsen, Simon Francis; Agner, Tove

2012-12-12

To evaluate the effect of a secondary prevention programme with education on skin care and individual counselling versus treatment as usual in healthcare workers with hand eczema. Randomised, observer blinded parallel group superiority clinical trial. Three hospitals in Denmark. 255 healthcare workers with self reported hand eczema within the past year randomised centrally and stratified by profession, severity of eczema, and hospital. 123 were allocated to the intervention group and 132 to the control group. Education in skin care and individual counselling based on patch and prick testing and assessment of work and domestic related exposures. The control was treatment as usual. The primary outcome was clinical severity of disease at five month follow-up measured by scores on the hand eczema severity index. The secondary outcomes were scores on the dermatology life quality index, self evaluated severity of hand eczema, skin protective behaviours, and knowledge of hand eczema from onset to follow-up. Follow-up data were available for 247 of 255 participants (97%). At follow-up, the mean score on the hand eczema severity index was significantly lower (improved) in the intervention group than control group: difference of means, unadjusted -3.56 (95% confidence interval -4.92 to -2.14); adjusted -3.47 (-4.80 to -2.14), both P<0.001 for difference. The mean score on the dermatology life quality index was also significantly lower (improved) in the intervention group at follow-up: difference of means: unadjusted -0.78, non-parametric test P=0.003; adjusted -0.92, -1.48 to -0.37). Self evaluated severity and skin protective behaviour by hand washings and wearing of protective gloves were also statistically significantly better in the intervention group, whereas this was not the case for knowledge of hand eczema. A secondary prevention programme for hand eczema improved severity and quality of life and had a positive effect on self evaluated severity and skin protective behaviour by hand washings and wearing of protective gloves. ClinicalTrials.gov NCT01012453.

Developed land cover of Puerto Rico

Treesearch

William A. Gould; Sebastian Martinuzzi; Olga M. Ramos Gonzalez

2008-01-01

This map shows the distribution of developed land cover in Puerto Rico (Martinuzzi et al. 2007). Developed land cover refers to urban, built-up and non-vegetated areas that result from human activity. These typically include built structures, concrete, asphalt, and other infrastructure. The developed land cover was estimated using Landsat 7 ETM+ satellite images pan...

View of the STS-88 crew in the Node 1/Unity module

NASA Image and Video Library

2013-11-19

STS088-334-012 (4-15 Dec. 1998) --- Astronaut Frederick W. Sturckow, pilot, works with furnishings on the U.S.-built Unity module as he and five crew mates teamed up to prepare Unity and the connected Russian-built Zarya module for their International Space Station (ISS) roles.

Assessing land take by urban development and its impact on carbon storage: Findings from two case studies in Italy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sallustio, L.; Quatrini, V.; Geneletti, D., E-mail: davide.geneletti@unitn.it

Highlights: • We tested a new methodology for monitoring land take and its effects on C storage. • The ecological impact of urban growth derives from the previous land use. • C loss increases with the naturalness of the territory. • Different urban assets may imply different forms of land take containment. Land take due to urbanization triggers a series of negative environmental impacts with direct effects on quality of life for people living in cities. Changes in ecosystem services are associated with land take, among which is the immediate C loss due to land use conversion. Land use changemore » monitoring represents the first step in quantifying land take and its drivers and impacts. To this end, we propose an innovative methodology for monitoring land take and its effects on ecosystem services (in particular, C loss) under multi-scale contexts. The devised approach was tested in two areas with similar sizes, but different land take levels during the time-span 1990–2008 in Central Italy (the Province of Rome and the Molise Region). The estimates of total coverage of built up areas were calculated using point sampling. The area of the urban patches including each sampling point classified as built up areas in the year 1990 and/or in the year 2008 is used to estimate total abundance and average area of built up areas. Biophysical and economic values for carbon loss associated with land take were calculated using InVEST. Although land take was 7–8 times higher in the Province of Rome (from 15.1% in 1990 to 20.4% in 2008) than in Molise region, our findings show that its relative impact on C storage is higher in the latter, where the urban growth consistently affects not only croplands but also semi-natural land uses such as grasslands and other wooded lands. The total C loss due to land take has been estimated in 1.6 million Mg C, corresponding to almost 355 million €. Finally, the paper discusses the main characteristics of urban growth and their ecological impact leading to risks and challenges for future urban planning and land use policies.« less

Portfolio optimization in enhanced index tracking with goal programming approach

NASA Astrophysics Data System (ADS)

Siew, Lam Weng; Jaaman, Saiful Hafizah Hj.; Ismail, Hamizun bin

2014-09-01

Enhanced index tracking is a popular form of passive fund management in stock market. Enhanced index tracking aims to generate excess return over the return achieved by the market index without purchasing all of the stocks that make up the index. This can be done by establishing an optimal portfolio to maximize the mean return and minimize the risk. The objective of this paper is to determine the portfolio composition and performance using goal programming approach in enhanced index tracking and comparing it to the market index. Goal programming is a branch of multi-objective optimization which can handle decision problems that involve two different goals in enhanced index tracking, a trade-off between maximizing the mean return and minimizing the risk. The results of this study show that the optimal portfolio with goal programming approach is able to outperform the Malaysia market index which is FTSE Bursa Malaysia Kuala Lumpur Composite Index because of higher mean return and lower risk without purchasing all the stocks in the market index.

Wavefront measurements of phase plates combining a point-diffraction interferometer and a Hartmann-Shack sensor.

PubMed

Bueno, Juan M; Acosta, Eva; Schwarz, Christina; Artal, Pablo

2010-01-20

A dual setup composed of a point diffraction interferometer (PDI) and a Hartmann-Shack (HS) wavefront sensor was built to compare the estimates of wavefront aberrations provided by the two different and complementary techniques when applied to different phase plates. Results show that under the same experimental and fitting conditions both techniques provide similar information concerning the wavefront aberration map. When taking into account all Zernike terms up to 6th order, the maximum difference in root-mean-square wavefront error was 0.08 microm, and this reduced up to 0.03 microm when excluding lower-order terms. The effects of the pupil size and the order of the Zernike expansion used to reconstruct the wavefront were evaluated. The combination of the two techniques can accurately measure complicated phase profiles, combining the robustness of the HS and the higher resolution and dynamic range of the PDI.

Live cell refractometry using Hilbert phase microscopy and confocal reflectance microscopy.

PubMed

Lue, Niyom; Choi, Wonshik; Popescu, Gabriel; Yaqoob, Zahid; Badizadegan, Kamran; Dasari, Ramachandra R; Feld, Michael S

2009-11-26

Quantitative chemical analysis has served as a useful tool for understanding cellular metabolisms in biology. Among many physical properties used in chemical analysis, refractive index in particular has provided molecular concentration that is an important indicator for biological activities. In this report, we present a method of extracting full-field refractive index maps of live cells in their native states. We first record full-field optical thickness maps of living cells by Hilbert phase microscopy and then acquire physical thickness maps of the same cells using a custom-built confocal reflectance microscope. Full-field and axially averaged refractive index maps are acquired from the ratio of optical thickness to physical thickness. The accuracy of the axially averaged index measurement is 0.002. This approach can provide novel biological assays of label-free living cells in situ.

Live Cell Refractometry Using Hilbert Phase Microscopy and Confocal Reflectance Microscopy†

PubMed Central

Lue, Niyom; Choi, Wonshik; Popescu, Gabriel; Yaqoob, Zahid; Badizadegan, Kamran; Dasari, Ramachandra R.; Feld, Michael S.

2010-01-01

Quantitative chemical analysis has served as a useful tool for understanding cellular metabolisms in biology. Among many physical properties used in chemical analysis, refractive index in particular has provided molecular concentration that is an important indicator for biological activities. In this report, we present a method of extracting full-field refractive index maps of live cells in their native states. We first record full-field optical thickness maps of living cells by Hilbert phase microscopy and then acquire physical thickness maps of the same cells using a custom-built confocal reflectance microscope. Full-field and axially averaged refractive index maps are acquired from the ratio of optical thickness to physical thickness. The accuracy of the axially averaged index measurement is 0.002. This approach can provide novel biological assays of label-free living cells in situ. PMID:19803506

Follow-up of fetuses with congenital diaphragmatic hernia: The quantitative lung index.

PubMed

Rodó, Carlota; Illescas, Tamara; Arévalo, Silvia; Pérez-Hoyos, Santiago; Carreras, Elena

2018-03-26

To assess the longitudinal behavior of Quantitative Lung Index (QLI) for the follow-up of fetuses with congenital diaphragmatic hernia. Retrospective study of fetuses with isolated left congenital diaphragmatic hernia. The fetuses were assessed by ultrasound at different gestational ages and QLI was retrospectively calculated by means of previous lung-to-head ratio measurements. We used a random effects model (mixed model with repeated measurements) to compare the performance of the QLI in operated and non-operated fetuses throughout pregnancy. Fifty-eight cases of isolated left diaphragmatic hernia with complete follow-up were assessed in Hospital Universitari Vall d'Hebron in Barcelona (2003-2015). Thirty-eight of them were managed expectantly (non-TO) and the other 20 underwent tracheal occlusion (TO). All fetuses undergoing tracheal occlusion had lung-to-head ratio (LHR) <1, observed-to-expected LHR (o/eLHR) ≤45%, QLI <0.6 and liver up inside the thorax. The survival rate was 87% for the non-TO group and 60% for the TO group (p = 0.02). The QLI remained constant throughout pregnancy in both groups. The QLI in the TO group had lower values than the non-TO group (p < 0.03). The quantitative lung index was constant during pregnancy. This index was lower in fetuses undergoing tracheal occlusion but no significant changes were seen in its performance during pregnancy. Copyright © 2018 Elsevier B.V. All rights reserved.

Comparison of measured temperatures, thermal stresses and creep residues with predictions on a built-up titanium structure

NASA Technical Reports Server (NTRS)

Jenkins, Jerald M.

1987-01-01

Temperature, thermal stresses, and residual creep stresses were studied by comparing laboratory values measured on a built-up titanium structure with values calculated from finite-element models. Several such models were used to examine the relationship between computational thermal stresses and thermal stresses measured on a built-up structure. Element suitability, element density, and computational temperature discrepancies were studied to determine their impact on measured and calculated thermal stress. The optimum number of elements is established from a balance between element density and suitable safety margins, such that the answer is acceptably safe yet is economical from a computational viewpoint. It is noted that situations exist where relatively small excursions of calculated temperatures from measured values result in far more than proportional increases in thermal stress values. Measured residual stresses due to creep significantly exceeded the values computed by the piecewise linear elastic strain analogy approach. The most important element in the computation is the correct definition of the creep law. Computational methodology advances in predicting residual stresses due to creep require significantly more viscoelastic material characterization.

PLANS: A finite element program for nonlinear analysis of structures. Volume 1: Theoretical manual

NASA Technical Reports Server (NTRS)

Pifko, A.; Levine, H. S.; Armen, H., Jr.

1975-01-01

The PLANS system is described which is a finite element program for nonlinear analysis. The system represents a collection of special purpose computer programs each associated with a distinct physical problem class. Modules of PLANS specifically referenced and described in detail include: (1) REVBY, for the plastic analysis of bodies of revolution; (2) OUT-OF-PLANE, for the plastic analysis of 3-D built-up structures where membrane effects are predominant; (3) BEND, for the plastic analysis of built-up structures where bending and membrane effects are significant; (4) HEX, for the 3-D elastic-plastic analysis of general solids; and (5) OUT-OF-PLANE-MG, for material and geometrically nonlinear analysis of built-up structures. The SATELLITE program for data debugging and plotting of input geometries is also described. The theoretical foundations upon which the analysis is based are presented. Discussed are the form of the governing equations, the methods of solution, plasticity theories available, a general system description and flow of the programs, and the elements available for use.

Dosimetric and Clinical Analysis of Spatial Distribution of the Radiation Dose in Gamma Knife Radiosurgery for Vestibular Schwannoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Massager, Nicolas, E-mail: nmassage@ulb.ac.be; Neurosurgery-Department, Hospital Erasme, Brussels; Lonneville, Sarah

2011-11-15

Objectives: We investigated variations in the distribution of radiation dose inside (dose inhomogeneity) and outside (dose falloff) the target volume during Gamma Knife (GK) irradiation of vestibular schwannoma (VS). We analyzed the relationship between some parameters of dose distribution and the clinical and radiological outcome of patients. Methods and Materials: Data from dose plans of 203 patients treated for a vestibular schwannoma by GK C using same prescription dose (12 Gy at the 50% isodose) were collected. Four different dosimetric indexes were defined and calculated retrospectively in all plannings on the basis of dose-volume histograms: Paddick conformity index (PI), gradientmore » index (GI), homogeneity index (HI), and unit isocenter (UI). The different measures related to distribution of the radiation dose were compared with hearing and tumor outcome of 203 patients with clinical and radiological follow-up of minimum 2 years. Results: Mean, median, SD, and ranges of the four indexes of dose distribution analyzed were calculated; large variations were found between dose plans. We found a high correlation between the target volume and PI, GI, and UI. No significant association was found between the indexes of dose distribution calculated in this study and tumor control, tumor volume shrinkage, hearing worsening, loss of functional hearing, or complete hearing loss at last follow-up. Conclusions: Parameters of distribution of the radiation dose during GK radiosurgery for VS can be highly variable between dose plans. The tumor and hearing outcome of patients treated is not significantly related to these global indexes of dose distribution inside and around target volume. In GK radiosurgery for VS, the outcome seems more to be influenced by local radiation dose delivered to specific structures or volumes than by global dose gradients.« less

Use of indexing to update United States annual timber harvest by state

Treesearch

James Howard; Enrique Quevedo; Andrew Kramp

2009-01-01

This report provides an index method that can be used to update recent estimates of timber harvest by state to a common current year and to make 5-year projections. The Forest Service Forest Inventory and Analysis (FIA) program makes estimates of harvest for each state in differing years. The purpose of this updating method is to bring each state-level estimate up to a...

Research on Historic Bim of Built Heritage in Taiwan - a Case Study of Huangxi Academy

NASA Astrophysics Data System (ADS)

Lu, Y. C.; Shih, T. Y.; Yen, Y. N.

2018-05-01

Digital archiving technology for conserving cultural heritage is an important subject nowadays. The Taiwanese Ministry of Culture continues to try to converge the concept and technology of conservation towards international conventions. However, the products from these different technologies are not yet integrated due to the lack of research and development in this field. There is currently no effective schema in HBIM for Taiwanese cultural heritage. The aim of this research is to establish an HBIM schema for Chinese built heritage in Taiwan. The proposed method starts from the perspective of the components of built heritage buildings, up to the investigation of the important properties of the components through important international charters and Taiwanese laws of cultural heritage conservation. Afterwards, object-oriented class diagram and ontology from the scale of components were defined to clarify the concept and increase the interoperability. A historical database was then established for the historical information of components and to bring it into the concept of BIM in order to build a 3D model of heritage objects which can be used for visualization. An integration platform was developed for the users to browse and manipulate the database and 3D model simultaneously. In addition, this research also evaluated the feasibility of this method using the study case at the Huangxi academy located in Taiwan. The conclusion showed that class diagram could help the establishment of database and even its application for different Chinese built heritage objects. The establishment of ontology helped to convey knowledge and increase interoperability. In comparison to traditional documentation methods, the querying result of the platform was more accurate and less prone to human error.

Local food activity in the Republic of Ireland and Great Britain.

PubMed

Ricketts Hein, Jane; Watts, David

2010-01-01

Recent changes in local food supply systems have attracted substantial research interest, but little consideration has been paid to exactly where they occur. This article combines data from three studies to compare local food system development in England, Wales, Scotland and Ireland using a single index of food relocalisation, thereby exploring the usefulness of the Index across different social and political contexts. Four diagnostic indicators suggest that local food systems in the south west of Ireland and Britain are particularly well developed. The Index itself is a useful tool for making international comparisons, being easy to replicate and allowing the integration of different data sets. Perhaps its greatest utility is that it opens up new avenues for further research.

Interappointment emergencies in teeth with necrotic pulps.

PubMed

Alaçam, Tayfun; Tinaz, Ali Cemal

2002-05-01

The incidence of interappointment emergencies in symptomatic and asymptomatic teeth with necrotic pulps was evaluated, and severity of flare-ups was determined by a quantitative method using a flare-up index. There were no significant differences in the incidence of flare-ups attributable to gender, age, diameter of lesion, taking analgesics, placebos, or no medication, or preoperative symptomatic or asymptomatic tooth diagnoses (p > 0.05). There were significantly more painful flare-ups in mandibular teeth than in maxillary (p < 0.05).

Tissue-specific distribution of hemicelluloses in six different sugarcane hybrids as related to cell wall recalcitrance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Costa, Thales H. F.; Vega-Sánchez, Miguel E.; Milagres, Adriane M. F.

Background: Grasses are lignocellulosic materials useful to supply the billion-tons annual requirement for renewable resources that aim to produce transportation fuels and a variety of chemicals. However, the polysaccharides contained in grass cell walls are built in a recalcitrant composite. Deconstruction of these cell walls is still a challenge for the energy-efficient and economically viable transformation of lignocellulosic materials. The varied tissue-specific distribution of cell wall components adds complexity to the origins of cell wall recalcitrance in grasses. This complexity usually led to empirically developed pretreatment processes to overcome recalcitrance. A further complication is that efficient pretreatment procedures generally treatmore » the less recalcitrant tissues more than necessary, which results in the generation of undesirable biomass degradation products. Results: Six different sugarcane hybrids were used as model grasses to evaluate the tissue-specific distribution of hemicelluloses and the role of these components in cell wall recalcitrance. Acetylated glucuronoarabinoxylan (GAX) occurs in all tissues. Mixed-linkage glucan (MLG) was relevant in the innermost regions of the sugarcane internodes (up to 15.4 % w/w), especially in the low-lignin content hybrids. Immunofluorescence microscopy showed that xylans predominated in vascular bundles, whereas MLG occurred mostly in the parenchyma cell walls from the pith region of the hybrids with low-lignin content. Evaluation of the digestibility of sugarcane polysaccharides by commercial enzymes indicated that the cell wall recalcitrance varied considerably along the internode regions and in the sugarcane hybrids. Pith regions of the hybrids with high MLG and low-lignin contents reached up to 85 % cellulose conversion after 72 h of hydrolysis, without any pretreatment. Conclusions: The collective characteristics of the internode regions were related to the varied recalcitrance found in the samples. Components such as lignin and GAX were critical for the increased recalcitrance, but low cellulose crystallinity index, high MLG contents, and highly substituted GAX contributed to the generation of a less recalcitrant material.« less

Tissue-specific distribution of hemicelluloses in six different sugarcane hybrids as related to cell wall recalcitrance

DOE PAGES

Costa, Thales H. F.; Vega-Sánchez, Miguel E.; Milagres, Adriane M. F.; ...

2016-05-04

Background: Grasses are lignocellulosic materials useful to supply the billion-tons annual requirement for renewable resources that aim to produce transportation fuels and a variety of chemicals. However, the polysaccharides contained in grass cell walls are built in a recalcitrant composite. Deconstruction of these cell walls is still a challenge for the energy-efficient and economically viable transformation of lignocellulosic materials. The varied tissue-specific distribution of cell wall components adds complexity to the origins of cell wall recalcitrance in grasses. This complexity usually led to empirically developed pretreatment processes to overcome recalcitrance. A further complication is that efficient pretreatment procedures generally treatmore » the less recalcitrant tissues more than necessary, which results in the generation of undesirable biomass degradation products. Results: Six different sugarcane hybrids were used as model grasses to evaluate the tissue-specific distribution of hemicelluloses and the role of these components in cell wall recalcitrance. Acetylated glucuronoarabinoxylan (GAX) occurs in all tissues. Mixed-linkage glucan (MLG) was relevant in the innermost regions of the sugarcane internodes (up to 15.4 % w/w), especially in the low-lignin content hybrids. Immunofluorescence microscopy showed that xylans predominated in vascular bundles, whereas MLG occurred mostly in the parenchyma cell walls from the pith region of the hybrids with low-lignin content. Evaluation of the digestibility of sugarcane polysaccharides by commercial enzymes indicated that the cell wall recalcitrance varied considerably along the internode regions and in the sugarcane hybrids. Pith regions of the hybrids with high MLG and low-lignin contents reached up to 85 % cellulose conversion after 72 h of hydrolysis, without any pretreatment. Conclusions: The collective characteristics of the internode regions were related to the varied recalcitrance found in the samples. Components such as lignin and GAX were critical for the increased recalcitrance, but low cellulose crystallinity index, high MLG contents, and highly substituted GAX contributed to the generation of a less recalcitrant material.« less

The Strength of One-Piece Solid, Build-Up and Laminated Wood Airplane Wing Beams

NASA Technical Reports Server (NTRS)

Nelson, John H

1920-01-01

The purpose of this report is to summarize the results of all wood airplane wing beams tested to date in the Bureau of Standards Laboratory in order that the various kinds of wood and methods of construction may be compared. All beams tested were of an I section and the majority were somewhat similar in size and cross section to the front wing beam of the Curtiss JN-4 machine. Construction methods may be classed as (1) solid beams cut from solid stock; (2) three-piece beams, built up of three pieces, web and flanges glued together by a tongue-and-groove joint and (3) laminated beams built up of thin laminations of wood glued together.

Effect of DEM resolution and comparison between different weighting factors for hydrologic connectivity index

NASA Astrophysics Data System (ADS)

Cantreul, Vincent; Cavalli, Marco; Degré, Aurore

2016-04-01

The emerging concept of hydrological connectivity is difficult to quantify. Some indices have been proposed. The most cited is Borselli's one. It mainly uses the DEM as input. The pixel size may strongly impacts the result of the calculation. It has not been studied yet in silty areas. Another important aspect is the choice of the weighting factor which strongly influences the index value. The objective of this poster is so to compare 8 different DEM's resolutions (12, 24, 48, 72, 96, 204, 504 and 996cm) and 3 different weighting factors (factor C of Wischmeier, Manning's factor and rugosity index) in the Borselli's index calculation. The IC was calculated in a 124ha catchment (Hevillers), in the loess belt, in Belgium. The DEM used is coming from a UAV with a maximum resolution of 12 cm. Permanent covered surfaces are not considered in order to avoid artefact due to the vegetation (2% of the surface). Regarding the DEM pixel size, the IC increases for a given pixel when the pixel size decreases. That confirms some results observed in the Alpine region by Cavalli (2014). The mean difference between 12 cm and 10 m resolution is 35% with higher values up to 100% for higher connectivity zones (flow paths). Another result is the lower impact of connections in the watershed (grass strips…) at lower pixel sizes. This is linked to the small width of some connections which are sometimes comparing to cell size. Furthermore, a great loss of precision is observed from the 500 cm pixel size and upper. That remark is quite intuitive. Finally, some very well disconnected zones appear for the highest resolutions. Regarding the weighting factor, IC values calculated using C factor are lower than with the rugosity index which is only a topographic factor. With very high resolution DEM, it permits to represent the fine topography. For the C factor, the zones up to very well disconnected areas (grass strips, wood…) are well represented with lower index values than downstream zones. On the contrary, areas up to very well connected zones (roads, paths…) are higher and much more connected than downstream areas. For the Manning's factor, the values are very low and not very well contrasted. This factor is not enough discriminant for this study. In conclusion, high resolution DEM (1 meter or higher) is needed for the IC calculation (precison, impact of connections…). Very high resolution permits to identify very well disconnected areas but it multiplies the calculation time. For the weighting factor, rugosity index and C factor have each some advantages. It is planned to test other approaches for the IC calculation. Key-words: hydrological connectivity index, DEM, resolution, weighting factor, comparison

Examining the relationships among built environment, physical activity, and body mass index in El Paso, TX.

PubMed

Rutt, Candace D; Coleman, Karen J

2005-06-01

The current study examined the relationships among built environment, physical activity, and body mass index (BMI) in a primarily Hispanic border community in El Paso, TX. Data from a 2001 community-wide health survey were matched to environmental data using geocoding techniques in ARC VIEW software. A total of 996 adults were surveyed by phone and 452 were successfully geocoded. The sample was 71% female, 79% Hispanic, 42 +/- 17 years old, moderately acculturated, and had socioeconomic status (SES) levels of semi-skilled workers. Increasing BMI was related to less moderate intensity physical activity (P = 0.05), higher SES (P = 0.0003), worse overall health (P = 0.0004), and living in areas with greater land-use mix (less residential; P = 0.03). The relationship between overall health and BMI was in part mediated by higher numbers of barriers to physical activity in those with poor health, which lead to a decrease in moderate physical activity. These variables explained 20% of the variance in BMI. This is one of the first studies to find a positive relationship between land-use mix and BMI in a predominantly Hispanic, low-income community. The positive association between BMI and land-use mix may be due to the inclusion of individual SES as a controlling variable in the analyses, suggesting that SES may have a differential effect on how the built environment influences BMI in low- to moderate-income minority communities.

Clinical phenotypes and the biological parameters of Congolese patients suffering from sickle cell anemia: A first report from Central Africa.

PubMed

Mikobi, Tite M; Lukusa Tshilobo, Prosper; Aloni, Michel N; Akilimali, Pierre Z; Mvumbi-Lelo, Georges; Mbuyi-Muamba, Jean Marie

2017-11-01

The influence of phenotype on the clinical course and laboratory features of sickle cell anemia (SCA) is rarely described in sub-Saharan Africa. A cross-sectional study was conducted in Kinshasa. A clinical phenotype score was built up. The following definitions were applied: asymptomatic clinical phenotype (ACP; score≤5), moderate clinical phenotype (MCP; score between 6 and 15), and severe clinical phenotype (SCP; score≥16). ANOVA test were used to compare differences among categorical variables. We have studied 140 patients. The mean body mass index (BMI) value of three groups was lower (<25 kg/m 2 ) than the limit defining overweight. BMI of the subjects with ACP was significantly higher than those of other phenotypes (P<.05). Sickle cell patients with ACP have a high mean steady-state hemoglobin concentration compared to those with MCP and SCP (P<.001). A significant elevated baseline leukocyte count is associated with SCP (P<.001). Fetal Hemoglobin (HbF) was significantly higher in ACP. Significant elevation of alpha 1 and alpha 2 globulins in SCP were observed. In our study, fetal hemoglobin has an influence on the clinical severity and the biological parameters of SCA. The study provides data concerning the sickle cell anemia clinical and biological variability in our midst. © 2017 Wiley Periodicals, Inc.

Bioaccessibility and human health risk assessment of lead in soil from Daye City

NASA Astrophysics Data System (ADS)

Li, Q.; Li, F.; Xiao, M. S.; Cai, Y.; Xiong, L.; Huang, J. B.; Fu, J. T.

2018-01-01

Lead (Pb) in soil from 4 sampling sites of Daye City was studied. Bioaccessibilities of Pb in soil were determined by the method of simplified bioaccessible extraction test (SBET). Since traditional health risk assessment was built on the basis of metal total content, the risk may be overestimated. Modified human health risk assessment model considering bioaccessibility was built in this study. Health risk of adults and children exposure to Pb based on total contents and bioaccessible contents were evaluated. The results showed that bioaccessible content of Pb in soil was much lower than its total content, and the average bioaccessible factor (BF) was only 25.37%. The hazard indexes (HIs) for adults and children calculated by two methods were all lower than 1. It indicated that there were no no-carcinogenic risks of Pb for human in Daye. By comparing with the results, the average bioaccessible HIs for adults and children were lower than the total one, which was due to the lower hazard quotient (HQ). Proportions of non-carcinogenic risk exposure to Pb via different pathways have also changed. Particularly, the most main risk exposure pathway for adults turned from the oral ingestion to the inhalation.

A LEGO Mindstorms Brewster angle microscope

NASA Astrophysics Data System (ADS)

Fernsler, Jonathan; Nguyen, Vincent; Wallum, Alison; Benz, Nicholas; Hamlin, Matthew; Pilgram, Jessica; Vanderpoel, Hunter; Lau, Ryan

2017-09-01

A Brewster Angle Microscope (BAM) built from a LEGO Mindstorms kit, additional LEGO bricks, and several standard optics components, is described. The BAM was built as part of an undergraduate senior project and was designed, calibrated, and used to image phospholipid, cholesterol, soap, and oil films on the surface of water. A BAM uses p-polarized laser light reflected off a surface at the Brewster angle, which ideally yields zero reflectivity. When a film of different refractive index is added to the surface a small amount of light is reflected, which can be imaged in a microscope camera. Films of only one molecule (approximately 1 nm) thick, a monolayer, can be observed easily in the BAM. The BAM was used in a junior-level Physical Chemistry class to observe phase transitions of a monolayer and the collapse of a monolayer deposited on the water surface in a Langmuir trough. Using a photometric calculation, students observed a change in thickness of a monolayer during a phase transition of 7 Å, which was accurate to within 1 Å of the value determined by more advanced methods. As supplementary material, we provide a detailed manual on how to build the BAM, software to control the BAM and camera, and image processing software.

Urban structure and dengue fever in Puntarenas, Costa Rica

PubMed Central

Troyo, Adriana; Fuller, Douglas O.; Calderón-Arguedas, Olger; Solano, Mayra E.; Beier, John C.

2009-01-01

Dengue is currently the most important arboviral disease globally and is usually associated with built environments in tropical areas. Remotely sensed information can facilitate the study of urban mosquito-borne diseases by providing multiple temporal and spatial resolutions appropriate to investigate urban structure and ecological characteristics associated with infectious disease. In this study, coarse, medium and fine resolution satellite imagery (Moderate Resolution Imaging Spectrometer, Advanced Spaceborne Thermal Emission and Reflection Radiometer and QuickBird respectively) and ground-based data were analyzed for the Greater Puntarenas area, Costa Rica for the years 2002–04. The results showed that the mean normalized difference vegetation index (NDVI) was generally higher in the localities with lower incidence of dengue fever during 2002, although the correlation was statistically significant only in the dry season (r=−0.40; p=0.03). Dengue incidence was inversely correlated to built area and directly correlated with tree cover (r=0.75, p=0.01). Overall, the significant correlations between dengue incidence and urban structural variables (tree cover and building density) suggest that properties of urban structure may be associated with dengue incidence in tropical urban settings. PMID:20161131

Shape design sensitivity analysis using domain information

NASA Technical Reports Server (NTRS)

Seong, Hwal-Gyeong; Choi, Kyung K.

1985-01-01

A numerical method for obtaining accurate shape design sensitivity information for built-up structures is developed and demonstrated through analysis of examples. The basic character of the finite element method, which gives more accurate domain information than boundary information, is utilized for shape design sensitivity improvement. A domain approach for shape design sensitivity analysis of built-up structures is derived using the material derivative idea of structural mechanics and the adjoint variable method of design sensitivity analysis. Velocity elements and B-spline curves are introduced to alleviate difficulties in generating domain velocity fields. The regularity requirements of the design velocity field are studied.

Dustfall Effect on Hyperspectral Inversion of Chlorophyll Content - a Laboratory Experiment

NASA Astrophysics Data System (ADS)

Chen, Yuteng; Ma, Baodong; Li, Xuexin; Zhang, Song; Wu, Lixin

2018-04-01

Dust pollution is serious in many areas of China. It is of great significance to estimate chlorophyll content of vegetation accurately by hyperspectral remote sensing for assessing the vegetation growth status and monitoring the ecological environment in dusty areas. By using selected vegetation indices including Medium Resolution Imaging Spectrometer Terrestrial Chlorophyll Index (MTCI) Double Difference Index (DD) and Red Edge Position Index (REP), chlorophyll inversion models were built to study the accuracy of hyperspectral inversion of chlorophyll content based on a laboratory experiment. The results show that: (1) REP exponential model has the most stable accuracy for inversion of chlorophyll content in dusty environment. When dustfall amount is less than 80 g/m2, the inversion accuracy based on REP is stable with the variation of dustfall amount. When dustfall amount is greater than 80 g/m2, the inversion accuracy is slightly fluctuation. (2) Inversion accuracy of DD is worst among three models. (3) MTCI logarithm model has high inversion accuracy when dustfall amount is less than 80 g/m2; When dustfall amount is greater than 80 g/m2, inversion accuracy decreases regularly and inversion accuracy of modified MTCI (mMTCI) increases significantly. The results provide experimental basis and theoretical reference for hyperspectral remote sensing inversion of chlorophyll content.

[Application of simulated annealing method and neural network on optimizing soil sampling schemes based on road distribution].

PubMed

Han, Zong-wei; Huang, Wei; Luo, Yun; Zhang, Chun-di; Qi, Da-cheng

2015-03-01

Taking the soil organic matter in eastern Zhongxiang County, Hubei Province, as a research object, thirteen sample sets from different regions were arranged surrounding the road network, the spatial configuration of which was optimized by the simulated annealing approach. The topographic factors of these thirteen sample sets, including slope, plane curvature, profile curvature, topographic wetness index, stream power index and sediment transport index, were extracted by the terrain analysis. Based on the results of optimization, a multiple linear regression model with topographic factors as independent variables was built. At the same time, a multilayer perception model on the basis of neural network approach was implemented. The comparison between these two models was carried out then. The results revealed that the proposed approach was practicable in optimizing soil sampling scheme. The optimal configuration was capable of gaining soil-landscape knowledge exactly, and the accuracy of optimal configuration was better than that of original samples. This study designed a sampling configuration to study the soil attribute distribution by referring to the spatial layout of road network, historical samples, and digital elevation data, which provided an effective means as well as a theoretical basis for determining the sampling configuration and displaying spatial distribution of soil organic matter with low cost and high efficiency.

Review on short-wavelength infrared laser gated-viewing at Fraunhofer IOSB

NASA Astrophysics Data System (ADS)

Göhler, Benjamin; Lutzmann, Peter

2017-03-01

This paper reviews the work that has been done at Fraunhofer IOSB (and its predecessor institutes) in the past ten years in the area of laser gated-viewing (GV) in the short-wavelength infrared (SWIR) band. Experimental system demonstrators in various configurations have been built up to show the potential for different applications and to investigate specific topics. The wavelength of the pulsed illumination laser is 1.57 μm and lies in the invisible, retina-safe region allowing much higher pulse energies than for wavelengths in the visible or near-infrared band concerning eye safety. All systems built up, consist of gated Intevac LIVAR® cameras based on EBCCD/EBCMOS detectors sensitive in the SWIR band. This review comprises military and civilian applications in maritime and land domain-in particular vision enhancement in bad visibility, long-range applications, silhouette imaging, 3-D imaging by sliding gates and slope method, bistatic GV imaging, and looking through windows. In addition, theoretical studies that were conducted-e.g., estimating 3-D accuracy or modeling range performance-are presented. Finally, an outlook for future work in the area of SWIR laser GV at Fraunhofer IOSB is given.

Evaluation of maternal and neonatal hospital care: quality index of completeness

PubMed Central

da Silva, Ana Lúcia Andrade; Mendes, Antonio da Cruz Gouveia; Miranda, Gabriella Morais Duarte; de Sá, Domicio Aurélio; de Souza, Wayner Vieira; Lyra, Tereza Maciel

2014-01-01

OBJECTIVE Develop an index to evaluate the maternal and neonatal hospital care of the Brazilian Unified Health System. METHODS This descriptive cross-sectional study of national scope was based on the structure-process-outcome framework proposed by Donabedian and on comprehensive health care. Data from the Hospital Information System and the National Registry of Health Establishments were used. The maternal and neonatal network of Brazilian Unified Health System consisted of 3,400 hospitals that performed at least 12 deliveries in 2009 or whose number of deliveries represented 10.0% or more of the total admissions in 2009. Relevance and reliability were defined as criteria for the selection of variables. Simple and composite indicators and the index of completeness were constructed and evaluated, and the distribution of maternal and neonatal hospital care was assessed in different regions of the country. RESULTS A total of 40 variables were selected, from which 27 single indicators, five composite indicators, and the index of completeness of care were built. Composite indicators were constructed by grouping simple indicators and included the following variables: hospital size, level of complexity, delivery care practice, recommended hospital practice, and epidemiological practice. The index of completeness of care grouped the five variables and classified them in ascending order, thereby yielding five levels of completeness of maternal and neonatal hospital care: very low, low, intermediate, high, and very high. The hospital network was predominantly of small size and low complexity, with inadequate child delivery care and poor development of recommended and epidemiological practices. The index showed that more than 80.0% hospitals had a low index of completeness of care and that most qualified heath care services were concentrated in the more developed regions of the country. CONCLUSIONS The index of completeness proved to be of great value for monitoring the maternal and neonatal hospital care of Brazilian Unified Health System and indicated that the quality of health care was unsatisfactory. However, its application does not replace specific evaluations. PMID:25210827

The built environment and alcohol consumption in urban neighborhoods.

PubMed

Bernstein, Kyle T; Galea, Sandro; Ahern, Jennifer; Tracy, Melissa; Vlahov, David

2007-12-01

To examine the relations between characteristics of the neighborhood built environment and recent alcohol use. We recruited participants through a random digit dial telephone survey of New York City (NYC) residents. Alcohol consumption was assessed using a structured interview. All respondents were assigned to neighborhood of residence. Data on the internal and external built environment in 59 NYC neighborhoods were collected from archival sources. Multilevel models were used to assess the adjusted relations between features of the built environment and alcohol use. Of the 1355 respondents, 40% reported any alcohol consumption in the past 30 days, and 3% reported more than five drinks in one sitting (heavy drinking) in the past 30 days. Few characteristics of the built environment were associated with any alcohol use in the past 30 days. However, several features of the internal and external built environment were associated with recent heavy drinking. After adjustment, persons living in neighborhoods characterized by poorer features of the built environment were up to 150% more likely to report heavy drinking in the last 30 days compared to persons living in neighborhoods characterized by a better built environment. Quality of the neighborhood built environment may be associated with heavy alcohol consumption in urban populations, independent of individual characteristics. The role of the residential environment as a determinant of alcohol abuse warrants further examination.

Exposure to mercury in the mine of Almadén

PubMed Central

Gómez, Montserrat García; Klink, José Diego Caballero; Boffetta, Paolo; Español, Santiago; Sällsten, Gerd; Quintana, Javier Gómez

2007-01-01

Objectives To describe the process for obtaining mercury and the historical exposure of Almadén miners to mercury. Methods Information on every workplace and historical data on production, technological changes in the productive process and biological and environmental values of mercury was collected. A job‐exposure matrix was built with these values and the exposure to inorganic mercury was estimated quantitatively as μg/l of urine mercury. A cumulative exposure index was calculated for every worker by adding the estimates for every year in the different workplaces. Results In the mine, the highest exposures occurred during drilling, with values up to 2.26 mg/m3 in air, 2194 μg/l in urine and 374 μg/l in blood. Furnace operation and cleaning were the tasks with the highest values in metallurgy, peaking up to 3.37 mg/m3. The filling of bottles with mercury by free fall gave values within a range of 1.13–2.43 mg/m3 in air; these values dropped to 0.32–0.83 mg/m3 after introducing a new ventilation system. The toxicity effects of high doses of inorganic mercury on the central nervous and urinary systems have been known for decades. Conclusions The exposure of the workers in Almadén mines to mercury has been very high. The extremely high content cinnabar ore of the mine explains the increased concentrations of mercury in air at the work places. This, together with inadequate working conditions, explains the high mercury levels found in blood and urine during the study period. PMID:17227836

Pain Intensity and Opioid Utilization in Response to CPAP Therapy in Veterans with Obstructive Sleep Apnea on Chronic Opioid Treatment.

PubMed

Jaoude, Philippe; Lal, Ashima; Vermont, Leah; Porhomayon, Jahan; El-Solh, Ali A

2016-08-15

Sleep fragmentation has been linked to poor pain tolerance and lowered pain threshold. Little evidence exists on whether continuous positive airway pressure (CPAP) adherence in veterans with obstructive sleep apnea (OSA) who are taking opioids for non-malignant pain would ameliorate pain and reduce consumption of opioids. A retrospective case-control study was performed at a VA sleep center. Pain intensity was assessed using the Numerical Categorical Scale prior to CPAP treatment and 12-mo follow-up. Opioids intake was assessed using the morphine equivalent daily dose (MEDD). Adherence to CPAP was evaluated with the built-in meter. We reviewed 113 patients with OSA (apnea-hypopnea index [AHI] 35.9 ± 29.5) using a MEDD of 61.6 mg (range 5-980 mg) and a control group of 113 veterans with OSA (AHI 33.4 ± 27.3) on no opioids treatment. CPAP adherence was significantly lower at 12 mo in opioid-treated patients compared to controls (37% versus 55%; p = 0.01). Greater pain intensity was the only independent variable associated with CPAP non-adherence at 12-mo follow-up (p = 0.03). Compared to baseline, no significant difference was observed in pain intensity or consumption of opioids in CPAP adherent patients. CPAP treatment did not reduce pain intensity or consumption of opioids in veterans with chronic pain who have coexisting OSA. CPAP adherence was lower in opioid-treated veterans with OSA compared to opioid-free veterans with OSA. Pain intensity was the only determinant of CPAP adherence. Future studies are needed to evaluate pain management program on adherence to CPAP. © 2016 American Academy of Sleep Medicine.

Meta-analysis shows similar re-bleeding rates among Western and Eastern populations after index video capsule endoscopy.

PubMed

Tziatzios, Georgios; Gkolfakis, Paraskevas; Hassan, Cesare; Toth, Ervin; Zullo, Angelo; Koulaouzidis, Anastasios; Dimitriadis, George D; Triantafyllou, Konstantinos

2018-03-01

Video capsule endoscopy (VCE) is the first-line diagnostic procedure for investigating obscure gastrointestinal bleeding (OGIB). Different re-bleeding rates following index VCE have been reported among Western and Eastern studies. We conducted a comprehensive literature search to identify studies examining re-bleeding rates after VCE for OGIB. Meta-analysis assessed the pooled proportion of re-bleeding events after VCE for OGIB according to study's origin (Western vs. Eastern) and according to the length of follow-up (≥24 months vs. <24 months). We also calculated the re-bleeding odds ratios (OR; 95% CI) after positive vs. negative index VCE, overt vs. occult initial presentation of bleeding and after interventional treatment for positive index cases, according to the study's origin. We included 46 (30 Western and 16 Eastern) studies with 5796 patients. Significant heterogeneity was detected among meta-analyzed studies. Overall, the pooled re-bleeding rate was similar between Western (29%; 95% CI: 23-34) and Eastern (21%; 95% CI: 15-27) populations, irrespective of the length of follow-up. The odds of re-bleeding was significantly higher after positive as compared to negative index VCE in Eastern studies (OR: 1.77; 95% CI: 1.07-2.94). Application of specific treatment after positive index VCE was associated with lower re-bleeding odds in both Western (OR: 0.37; 95% CI: 0.16-0.87) and Eastern (OR: 0.39; 95% CI: 0.21-0.72) populations. Patients undergoing VCE for OGIB have similar re-bleeding rates in the East and the West, regardless of the length of follow-up. However, increased re-bleeding odds after positive index VCE is observed in Eastern studies. Copyright © 2018 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.

Reliability, construct validity, and responsiveness of the neck disability index, patient-specific functional scale, and numeric pain rating scale in patients with cervical radiculopathy.

PubMed

Young, Ian A; Cleland, Joshua A; Michener, Lori A; Brown, Chris

2010-10-01

To examine the psychometric properties of the Neck Disability Index, Patient-Specific Functional Scale, and the Numeric Pain Rating Scale in a cohort of patients with cervical radiculopathy. A single-group repeated-measures design. Patients (n = 165) presenting to physical therapy with cervical radiculopathy completed the Neck Disability Index, Patient-Specific Functional Scale, and Numeric Pain Rating Scale at the baseline examination and at a follow-up. At the time of follow-up, all patients also completed the Global Rating of Change, which was used to dichotomize patients as improved or stable. Baseline and follow-up scores were used to determine the test-retest reliability, construct validity, and minimal levels of detectable and clinically important change for the Neck Disability Index, Patient-Specific Functional Scale, and Numeric Pain Rating Scale. Both the Neck Disability Index and Numeric Pain Rating Scale exhibited fair test-retest reliability, whereas the Patient-Specific Functional Scale exhibited poor reliability in patients with cervical radiculopathy. All three outcome measures showed adequate responsiveness in this patient population. The minimal detectable change was 13.4 for the Neck Disability Index, 3.3 for the Patient-Specific Functional Scale, and 4.1 for the Numeric Pain Rating Scale. The threshold for the minimal clinically important difference was 8.5 for the Neck Disability Index and 2.2 for both the Patient-Specific Functional Scale and Numeric Pain Rating Scale. In light of the varied distribution of symptoms in patients with cervical radiculopathy, future studies should investigate the psychometric properties of other neck-related disability measures in this patient population.

Costs of venous thromboembolism associated with hospitalization for medical illness.

PubMed

Cohoon, Kevin P; Leibson, Cynthia L; Ransom, Jeanine E; Ashrani, Aneel A; Petterson, Tanya M; Long, Kirsten Hall; Bailey, Kent R; Heit, Johm A

2015-04-01

To determine population-based estimates of medical costs attributable to venous thromboembolism (VTE) among patients currently or recently hospitalized for acute medical illness. Population-based cohort study conducted in Olmsted County, Minnesota. Using Rochester Epidemiology Project (REP) resources, we identified all Olmsted County residents with objectively diagnosed incident VTE during or within 92 days of hospitalization for acute medical illness over the 18-year period of 1988 to 2005 (n=286). One Olmsted County resident hospitalized for medical illness without VTE was matched to each case for event date (±1 year), duration of prior medical history, and active cancer status. Subjects were followed forward in REP provider-linked billing data for standardized, inflation-adjusted direct medical costs (excluding outpatient pharmaceutical costs) from 1 year before their respective event or index date to the earliest of death, emigration from Olmsted County, or December 31, 2011 (study end date). We censored follow-up such that each case and matched control had similar periods of observation. We used generalized linear modeling (controlling for age, sex, preexisting conditions, and costs 1 year before index) to predict costs for cases and controls. Adjusted mean predicted costs were 2.5-fold higher for cases ($62,838) than for controls ($24,464) (P<.001) from index to up to 5 years post index. Cost differences between cases and controls were greatest within the first 3 months after the event date (mean difference=$16,897) but costs remained significantly higher for cases compared with controls for up to 3 years. VTE during or after recent hospitalization for medical illness contributes a substantial economic burden.

An improved method for predicting brittleness of rocks via well logs in tight oil reservoirs

NASA Astrophysics Data System (ADS)

Wang, Zhenlin; Sun, Ting; Feng, Cheng; Wang, Wei; Han, Chuang

2018-06-01

There can be no industrial oil production in tight oil reservoirs until fracturing is undertaken. Under such conditions, the brittleness of the rocks is a very important factor. However, it has so far been difficult to predict. In this paper, the selected study area is the tight oil reservoirs in Lucaogou formation, Permian, Jimusaer sag, Junggar basin. According to the transformation of dynamic and static rock mechanics parameters and the correction of confining pressure, an improved method is proposed for quantitatively predicting the brittleness of rocks via well logs in tight oil reservoirs. First, 19 typical tight oil core samples are selected in the study area. Their static Young’s modulus, static Poisson’s ratio and petrophysical parameters are measured. In addition, the static brittleness indices of four other tight oil cores are measured under different confining pressure conditions. Second, the dynamic Young’s modulus, Poisson’s ratio and brittleness index are calculated using the compressional and shear wave velocity. With combination of the measured and calculated results, the transformation model of dynamic and static brittleness index is built based on the influence of porosity and clay content. The comparison of the predicted brittleness indices and measured results shows that the model has high accuracy. Third, on the basis of the experimental data under different confining pressure conditions, the amplifying factor of brittleness index is proposed to correct for the influence of confining pressure on the brittleness index. Finally, the above improved models are applied to formation evaluation via well logs. Compared with the results before correction, the results of the improved models agree better with the experimental data, which indicates that the improved models have better application effects. The brittleness index prediction method of tight oil reservoirs is improved in this research. It is of great importance in the optimization of fracturing layer and fracturing construction schemes and the improvement of oil recovery.

Simulation of quantum dynamics with integrated photonics

NASA Astrophysics Data System (ADS)

Sansoni, Linda; Sciarrino, Fabio; Mataloni, Paolo; Crespi, Andrea; Ramponi, Roberta; Osellame, Roberto

2012-12-01

In recent years, quantum walks have been proposed as promising resources for the simulation of physical quantum systems. In fact it is widely adopted to simulate quantum dynamics. Up to now single particle quantum walks have been experimentally demonstrated by different approaches, while only few experiments involving many-particle quantum walks have been realized. Here we simulate the 2-particle dynamics on a discrete time quantum walk, built on an array of integrated waveguide beam splitters. The polarization independence of the quantum walk circuit allowed us to exploit the polarization entanglement to encode the symmetry of the two-photon wavefunction, thus the bunching-antibunching behavior of non interacting bosons and fermions has been simulated. We have also characterized the possible distinguishability and decoherence effects arising in such a structure. This study is necessary in view of the realization of a quantum simulator based on an integrated optical array built on a large number of beam splitters.

The application of quasi-steady approximation in atomic kinetics in simulation of hohlraum radiation drive

NASA Astrophysics Data System (ADS)

Ren, Guoli; Pei, Wenbing; Lan, Ke; Gu, Peijun; Li, Xin; Institute of Applied Physics; Computional Mathematics Team

2011-10-01

In current routine 2D simulation of hohlraum physics, we adopt the principal-quantum- number(n-level) average atom model(AAM). However, the experimental frequency-dependant radiative drive differs from our n-level simulated drive, which reminds us the need of a more detailed atomic kinetics description. The orbital-quantum-number(nl-level) AAM is a natural consideration but the in-line calculation consumes much more resources. We use a new method to built up a nl-level bound electron distribution using in-line n-level calculated plasma condition (such as temperature, density, average ionization degree). We name this method ``quasi-steady approximation.'' Using the re-built nl-level bound electron distribution (Pnl) , we acquire a new hohlraum radiative drive by post-processing. Comparison with the n-level post-processed hohlraum drive shows that we get an almost identical radiation flux but with more-detailed frequency-dependant structures.

Universal scaling of the distribution of land in urban areas

NASA Astrophysics Data System (ADS)

Riascos, A. P.

2017-09-01

In this work, we explore the spatial structure of built zones and green areas in diverse western cities by analyzing the probability distribution of areas and a coefficient that characterize their respective shapes. From the analysis of diverse datasets describing land lots in urban areas, we found that the distribution of built-up areas and natural zones in cities obey inverse power laws with a similar scaling for the cities explored. On the other hand, by studying the distribution of shapes of lots in urban regions, we are able to detect global differences in the spatial structure of the distribution of land. Our findings introduce information about spatial patterns that emerge in the structure of urban settlements; this knowledge is useful for the understanding of urban growth, to improve existing models of cities, in the context of sustainability, in studies about human mobility in urban areas, among other applications.

Design and research of built-in sample cell with multiple optical reflections

NASA Astrophysics Data System (ADS)

Liu, Jianhui; Wang, Shuyao; Lv, Jinwei; Liu, Shuyang; Zhou, Tao; Jia, Xiaodong

2017-10-01

In the field of trace gas measurement, with the characteristics of high sensitivity, high selectivity and rapid detection, tunable diode laser absorption spectroscopy (TDLAS) is widely used in industrial process and trace gas pollution monitoring. Herriott cell is a common form of multiple reflections of the sample cell, the structure of the Herriott cell is relatively simple, which be used to application of trace gas absorption spectroscopy. In the pragmatic situation, the gas components are complicated, and the continuous testing process for a long time can lead to different degree of pollution and corrosion for the reflector in the sample cell. If the mirror is not cleaned up in time, it will have a great influence on the detection accuracy. In order to solve this problem in the process of harsh environment detection, this paper presents a design of the built-in sample cell to avoid the contact of gas and the mirror, thereby effectively reducing corrosion pollution. If there is optical pollution, direct replacement of the built-in optical sample cell can easily to be disassembled, and cleaned. The advantage of this design is long optical path, high precision, cost savings and so on.

[Radiological study on the n-HA/PA66 cage used in the transforaminal lumbar interbody fusion].

PubMed

Sang, Pei-ming; Zhang, Ming; Chen, Bin-hui; Cai, Chang; Gu, Shi-rong; Zhou, Min

2014-08-01

To explore the effects of nano-hydroxyapatite/polyamide 66 (n-HA/PA66) cage on recovering and maintaining lumbar curvature, lumbar heights and fusion rate when used in the transforaminal lumbar interbody fusion. From February to July 2012, 50 patients with degenerative lumbar disease(lumbar disc herniation in 32 cases and lumbar spondylolisthesis in 18 cases) were treated with transforaminal lumbar interbody fusion using the n-HA/PA66 cage, and their preoperative and postoperative clinical outcomes were analyzed. The patients were followed up for 2, 4, 6 and 8 months after operation, during which the CR and CT film of lumbar vertebra were checked to get relative height of vertebral space, Taillard index,index of lumbar spinal curvature,angle of segmental and full lumbar lordosis. The data were analyzed respectively with pair t-test, analysis of variance or LSD-t-test. All the patients were followed up, and the duraion ranged from 8 to 13 months, with a mean of 11.32 months. There were significant differences in relative height of vertebral space, Taillard index, index of lumbar spinal curvature, angle of segmental and full lumbar lordosis after surgery, but there were no significant differences in different periods after operation. The fusion time of lumbar ranged from 4 to 8 months. The n-HA/PA66 cage can recover and maintain lumbar normal stability with higher rate of fusion and less complications.

Empirical prediction of the onset dates of South China Sea summer monsoon

NASA Astrophysics Data System (ADS)

Zhu, Zhiwei; Li, Tim

2017-03-01

The onset of South China Sea summer monsoon (SCSSM) signifies the commencement of the wet season over East Asia. Predicting the SCSSM onset date is of significant importance. In this study, we establish two different statistical models, namely the physical-empirical model (PEM) and the spatial-temporal projection model (STPM) to predict the SCSSM onset. The PEM is constructed from the seasonal prediction perspective. Observational diagnoses reveal that the early onset of the SCSSM is preceded by (a) a warming tendency in middle and lower troposphere (850-500 hPa) over central Siberia from January to March, (b) a La Niña-like zonal dipole sea surface temperature pattern over the tropical Pacific in March, and (c) a dipole sea level pressure pattern with negative center in subtropics and positive center over high latitude of Southern Hemisphere in January. The PEM built on these predictors achieves a cross-validated reforecast temporal correlation coefficient (TCC) skill of 0.84 for the period of 1979-2004, and an independent forecast TCC skill of 0.72 for the period 2005-2014. The STPM is built on the extended-range forecast perspective. Pentad data are used to predict a zonal wind index over the South China Sea region. Similar to PEM, the STPM is constructed using 1979-2004 data. Based on the forecasted zonal wind index, the independent forecast of the SCSSM onset dates achieves a TCC skill of 0.90 for 2005-2014. The STPM provides more detailed information for the intraseasonal evolution during the period of the SCSSM onset (pentad 25-35). The two models proposed herein are expected to facilitate the real-time prediction of the SCSSM onset.

Optical cage generated by azimuthal- and radial-variant vector beams.

PubMed

Man, Zhongsheng; Bai, Zhidong; Li, Jinjian; Zhang, Shuoshuo; Li, Xiaoyu; Zhang, Yuquan; Ge, Xiaolu; Fu, Shenggui

2018-05-01

We propose a method to generate an optical cage using azimuthal- and radial-variant vector beams in a high numerical aperture optical system. A new kind of vector beam that has azimuthal- and radial-variant polarization states is proposed and demonstrated theoretically. Then, an integrated analytical model to calculate the electromagnetic field and Poynting vector distributions of the input azimuthal- and radial-variant vector beams is derived and built based on the vector diffraction theory of Richards and Wolf. From calculations, a full polarization-controlled optical cage is obtained by simply tailoring the radial index of the polarization, the uniformity U of which is up to 0.7748, and the cleanness C is zero. Additionally, a perfect optical cage can be achieved with U=1, and C=0 by introducing an amplitude modulation; its magnetic field and energy flow are also demonstrated in detail. Such optical cages may be helpful in applications such as optical trapping and high-resolution imaging.

Urban Green Space Dynamics and Distributional Equity in Kumasi, Ghana

NASA Astrophysics Data System (ADS)

Nero, Bertrand

2016-08-01

Urban green spaces (UGS) are crucial for urban sustainability and resilience to environmental vulnerabilities but are often marginalized in cities in the global south. This paper analyzed the spatio-temporal change, extent and distributional inequities associated with UGS in Kumasi, Ghana. Spatial techniques and Gini index were deployed in the assessments.Kumasi UGS cover is currently 33 % but is declining fourfold faster in recent years (2009-2014) than previously (1986-2002). Shannon entropy for built-up sprawl and mean per capita UGS area in 2014 were 0.99 and 25 m2, respectively. Per capita UGS area for 2009 (r2 = 0.50, p=0.049) and 2014 (r2 = 0.53, p=0.0398) were moderately correlated with socioeconomic conditions of submetropolis. The Gini coefficient for both vegetation and tree cover was 0.26.Green space cover in Kumasi is plummeting and somewhat unevenly distributed. Strategic planning for UGS can ensure ample availability, equity in access, and resilience to climate related vulnerabilities.

ASPOD modifications of 1993-1994

NASA Technical Reports Server (NTRS)

Jackson, Jennifer J. (Editor); Fogarty, Paul W.; Muller, Matthew; Martucci, Thomas A., III; Williams, Daniel; Rowney, David A.

1994-01-01

ASPOD, Autonomous Space Processors for Orbital Debris, provides a unique way of collecting the space debris that has built up over the past 37 years. For the past several years, ASPOD has gone through several different modifications. This year's concentrations were on the solar cutting array, the solar tracker, the earth based main frame/tilt table, the controls for the two robotic arms, and accurate autocad drawings of ASPOD. This final report contains the reports written by the students who worked on the ASPOD project this year.

The Coast Artillery Journal. Volume 66, Number 4, April 1927

DTIC Science & Technology

1927-04-01

underpayment of college teachers-not overpayment of officers. A Short Discourse on the Japanese Language By LIEUT. THOMAS G. CRANFORD, JR., C. A. C. To a...here is one of the greatest differences, the Japanese have no grammar them- selves, it is a loosely constructed agglutinative tongue built up of words...circumstances to know several languages while we Americans in our isolation generally know only our own. As yet, the origin of the Japanese people has not been

Index of Refraction of Shock Loaded Soda-Lime Glass

NASA Astrophysics Data System (ADS)

Alexander, C. S.

2009-12-01

Soda-lime glass (SLG) is a potential low-cost VISAR window for use at moderate shock pressures (up to 2430 GPa) where the material remains transparent. In order for SLG to be practical as a VISAR window, the correction factor, which describes the frequency correction related to the strain dependence of the refractive index, and hence the index of refraction itself, must be characterized as a function of pressure. Characterization data are reported in this paper and compared to previous results. The present data show good agreement with those of Dandekar [J. Appl. Phys. 84, 6614 (1998)] and separate study results by Gibbons and Ahrens [J. Geophys. Res. 76, 5489 (1971)] up to 7 GPa. However, at stresses over 7 GPa, marked discrepancies are evident between the present data and that of Gibbons and Ahrens. Differences in test methods may explain these discrepancies.

Index of Refraction of Shock Loaded Soda-Lime Glass

NASA Astrophysics Data System (ADS)

Alexander, Scott

2009-06-01

Soda-lime glass (SLG) is a potential low-cost VISAR window for use at moderate shock pressures (up to approximately 25 GPa) where the material remains transparent. In order for SLG to be practical as a VISAR window, the correction factor, which describes the frequency correction related to the strain dependence of the refractive index, and hence the index of refraction itself, must be characterized as a function of pressure. Characterization data are reported in this paper and compared to previous results. The present data show good agreement with those of Dandekar [J. App. Physics, 84, 6614 (1998)] and separate study results by Gibbons and Ahrens [J. Geophys. Res., 76, 5489 (1971)] up to 7 GPa. However, at stresses over 7 GPa, marked discrepancies are evident between the present data and that of Gibbons and Ahrens. Differences in test methods may explain these discrepancies.

INDEX OF REFRACTION OF SHOCK LOADED SODA-LIME GLASS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alexander, C. S.

2009-12-28

Soda-lime glass (SLG) is a potential low-cost VISAR window for use at moderate shock pressures (up to 2430 GPa) where the material remains transparent. In order for SLG to be practical as a VISAR window, the correction factor, which describes the frequency correction related to the strain dependence of the refractive index, and hence the index of refraction itself, must be characterized as a function of pressure. Characterization data are reported in this paper and compared to previous results. The present data show good agreement with those of Dandekar [J. Appl. Phys. 84, 6614 (1998)] and separate study results bymore » Gibbons and Ahrens [J. Geophys. Res. 76, 5489 (1971)] up to 7 GPa. However, at stresses over 7 GPa, marked discrepancies are evident between the present data and that of Gibbons and Ahrens. Differences in test methods may explain these discrepancies.« less

Remote sensing analysis of riparian vegetation response to desert marsh restoration in the Mexican Highlands

USGS Publications Warehouse

Norman, Laura M.; Villarreal, Miguel; Pulliam, H. Ronald; Minckley, Robert L.; Gass, Leila; Tolle, Cindy; Coe, Michelle

2014-01-01

Desert marshes, or cienegas, are extremely biodiverse habitats imperiled by anthropogenic demands for water and changing climates. Given their widespread loss and increased recognition, remarkably little is known about restoration techniques. In this study, we examine the effects of gabions (wire baskets filled with rocks used as dams) on vegetation in the Cienega San Bernardino, in the Arizona, Sonora portion of the US-Mexico border, using a remote-sensing analysis coupled with field data. The Normalized Difference Vegetation Index (NDVI), used here as a proxy for plant biomass, is compared at gabion and control sites over a 27-year period during the driest months (May/June). Over this period, green-up occurred at most sites where there were gabions and at a few of the control sites where gabions had not been constructed. When we statistically controlled for differences among sites in source area, stream order, elevation, and interannual winter rainfall, as well as comparisons of before and after the initiation of gabion construction, vegetation increased around gabions yet did not change (or decreased) where there were no gabions. We found that NDVI does not vary with precipitation inputs prior to construction of gabions but demonstrates a strong response to precipitation after the gabions are built. Field data describing plant cover, species richness, and species composition document increases from 2000 to 2012 and corroborate reestablished biomass at gabions. Our findings validate that gabions can be used to restore riparian vegetation and potentially ameliorate drought conditions in a desert cienega.

SU-E-P-10: Establishment of Local Diagnostic Reference Levels of Routine Exam in Computed Tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeh, M; Wang, Y; Weng, H

Introduction National diagnostic reference levels (NDRLs) can be used as a reference dose of radiological examination can provide radiation dose as the basis of patient dose optimization. Local diagnostic reference levels (LDRLs) by periodically view and check doses, more efficiency to improve the way of examination. Therefore, the important first step is establishing a diagnostic reference level. Computed Tomography in Taiwan had been built up the radiation dose limit value,in addition, many studies report shows that CT scan contributed most of the radiation dose in different medical. Therefore, this study was mainly to let everyone understand DRL’s international status. Formore » computed tomography in our hospital to establish diagnostic reference levels. Methods and Materials: There are two clinical CT scanners (a Toshiba Aquilion and a Siemens Sensation) were performed in this study. For CT examinations the basic recommended dosimetric quantity is the Computed Tomography Dose Index (CTDI). Each exam each different body part, we collect 10 patients at least. Carried out the routine examinations, and all exposure parameters have been collected and the corresponding CTDIv and DLP values have been determined. Results: The majority of patients (75%) were between 60–70 Kg of body weight. There are 25 examinations in this study. Table 1 shows the LDRL of each CT routine examination. Conclusions: Therefore, this study would like to let everyone know DRL’s international status, but also establishment of computed tomography of the local reference levels for our hospital, and providing radiation reference, as a basis for optimizing patient dose.« less

A dynamic vulnerability evaluation model to smart grid for the emergency response

NASA Astrophysics Data System (ADS)

Yu, Zhen; Wu, Xiaowei; Fang, Diange

2018-01-01

Smart grid shows more significant vulnerability to natural disasters and external destroy. According to the influence characteristics of important facilities suffered from typical kinds of natural disaster and external destroy, this paper built a vulnerability evaluation index system of important facilities in smart grid based on eight typical natural disasters, including three levels of static and dynamic indicators, totally forty indicators. Then a smart grid vulnerability evaluation method was proposed based on the index system, including determining the value range of each index, classifying the evaluation grade standard and giving the evaluation process and integrated index calculation rules. Using the proposed evaluation model, it can identify the most vulnerable parts of smart grid, and then help adopting targeted emergency response measures, developing emergency plans and increasing its capacity of disaster prevention and mitigation, which guarantee its safe and stable operation.

USEPA Environmental Quality Index (EQI) and Associated Domain Indices by County for the United States

EPA Pesticide Factsheets

This map service displays the results data from the EPA's Environmental Quality Index. The US Environmental Protection Agency's (EPA) National Health and Environmental Effects Research Laboratory (NHEERL) in the Environmental Public Health Division (EPHD) is currently engaged in research aimed at developing a measure that estimates overall environmental quality at the county level for the United States. This work is being conducted as an effort to learn more about how various environmental factors simultaneously contribute to health disparities in low-income and minority populations, and to better estimate the total environmental and social context to which humans are exposed. This dataset contains the finalized Environmental Quality Index (EQI), and an index for each of the associated domains (air, water, land, built environment, and sociodemographic environment). Indices are at the county level for all counties in the United States.

Landscape urbanization and economic growth in China: positive feedbacks and sustainability dilemmas.

PubMed

Bai, Xuemei; Chen, Jing; Shi, Peijun

2012-01-03

Accelerating urbanization has been viewed as an important instrument for economic development and reducing regional income disparity in some developing countries, including China. Recent studies (Bloom et al. 2008) indicate that demographic urbanization level has no causal effect on economic growth. However, due to the varying and changing definition of urban population, the use of demographic indicators as a sole representing indicator for urbanization might be misleading. Here, we re-examine the causal relationship between urbanization and economic growth in Chinese cities and provinces in recent decades, using built-up areas as a landscape urbanization indicator. Our analysis shows that (1) larger cities, both in terms of population size and built-up area, and richer cities tend to gain more income, have larger built-up area expansion, and attract more population, than poorer cities or smaller cities; and (2) that there is a long-term bidirectional causality between urban built-up area expansion and GDP per capita at both city and provincial level, and a short-term bidirectional causality at provincial level, revealing a positive feedback between landscape urbanization and urban and regional economic growth in China. Our results suggest that urbanization, if measured by a landscape indicator, does have causal effect on economic growth in China, both within the city and with spillover effect to the region, and that urban land expansion is not only the consequences of economic growth in cities, but also drivers of such growth. The results also suggest that under its current economic growth model, it might be difficult for China to control urban expansion without sacrificing economic growth, and China's policy to stop the loss of agricultural land, for food security, might be challenged by its policy to promote economic growth through urbanization.

Geospatial assessment of tourism impact on land environment of Dehradun, Uttarakhand, India.

PubMed

Dey, Jaydip; Sakhre, Saurabh; Gupta, Vikash; Vijay, Ritesh; Pathak, Sunil; Biniwale, Rajesh; Kumar, Rakesh

2018-03-01

India's tourism industry has emerged as a leading industry with a potential to grow further in the next few decades. Dehradun, one of the famous tourist places in India located in the state of Uttarakhand, attracts tourist from all over the country and abroad. The surge in tourist number paved the way for new infrastructure projects like roads, buildings, and hotels, which in turn affects the topography of the mountainous region. In this study, remote sensing and GIS techniques have been used to assess the impact of tourism on the land environment of Dehradun. Satellite images of the years 1972, 2000, and 2016 were analyzed using object-based image analysis (OBIA) to derive land use and land cover (LULC) and ASTER-DEM (Digital Elevation Model) was used to determine the topography of the study area. LULC classification includes built-up, vegetation, forest, scrub, agriculture, plantation, and water body. The slope of the region was categorized as gentle, moderate, strong, extreme, steep, and very steep. To assess the sprawl of built-up on high terrain land, built-up class of LULC was overlaid on slope classes. The overlay analysis reveals that due to increase in tourism, the land use in terms of the built-up area has been extended from gentle slope to very steep slope. The haphazard construction on the extreme, steep, and very steep slope is prone to landslide and other natural disasters. For this, landslide susceptibility maps have also been generated using multicriteria evaluation (MCE) techniques to prevent haphazard construction and to assist in further planning of Dehradun City. This study suggests that a proper developmental plan of the city is essential which follows the principles of optimum use of land and sustainable tourism.

Landscape Urbanization and Economic Growth in China: Positive Feedbacks and Sustainability Dilemmas

PubMed Central

2011-01-01

Accelerating urbanization has been viewed as an important instrument for economic development and reducing regional income disparity in some developing countries, including China. Recent studies (Bloom et al. 2008) indicate that demographic urbanization level has no causal effect on economic growth. However, due to the varying and changing definition of urban population, the use of demographic indicators as a sole representing indicator for urbanization might be misleading. Here, we re-examine the causal relationship between urbanization and economic growth in Chinese cities and provinces in recent decades, using built-up areas as a landscape urbanization indicator. Our analysis shows that (1) larger cities, both in terms of population size and built-up area, and richer cities tend to gain more income, have larger built-up area expansion, and attract more population, than poorer cities or smaller cities; and (2) that there is a long-term bidirectional causality between urban built-up area expansion and GDP per capita at both city and provincial level, and a short-term bidirectional causality at provincial level, revealing a positive feedback between landscape urbanization and urban and regional economic growth in China. Our results suggest that urbanization, if measured by a landscape indicator, does have causal effect on economic growth in China, both within the city and with spillover effect to the region, and that urban land expansion is not only the consequences of economic growth in cities, but also drivers of such growth. The results also suggest that under its current economic growth model, it might be difficult for China to control urban expansion without sacrificing economic growth, and China’s policy to stop the loss of agricultural land, for food security, might be challenged by its policy to promote economic growth through urbanization. PMID:22103244

Categorisation of built environment characteristics: the trouble with tertiles.

PubMed

Lamb, Karen E; White, Simon R

2015-02-15

In the analysis of the effect of built environment features on health, it is common for researchers to categorise built environment exposure variables based on arbitrary percentile cut-points, such as median or tertile splits. This arbitrary categorisation leads to a loss of information and a lack of comparability between studies since the choice of cut-point is based on the sample distribution. In this paper, we highlight the various drawbacks of adopting percentile categorisation of exposure variables. Using data from the SocioEconomic Status and Activity in Women (SESAW) study from Melbourne, Australia, we highlight alternative approaches which may be used instead of percentile categorisation in order to assess built environment effects on health. We discuss these approaches using an example which examines the association between the number of accessible supermarkets and body mass index. We show that alternative approaches to percentile categorisation, such as transformations of the exposure variable or factorial polynomials, can be implemented easily using standard statistical software packages. These procedures utilise all of the available information available in the data, avoiding a loss of power as experienced when categorisation is adopted.We argue that researchers should retain all available information by using the continuous exposure, adopting transformations where necessary.

Systematic design of broadband path-coiling acoustic metamaterials

NASA Astrophysics Data System (ADS)

Jia, Zhetao; Li, Junfei; Shen, Chen; Xie, Yangbo; Cummer, Steven A.

2018-01-01

A design approach for acoustic metamaterial unit cells based on a coiled path with impedance matching layers (IMLs) is proposed in this paper. A theoretical approach is developed to calculate the transmission of the labyrinthine unit cells with different effective refractive indices. The IML is introduced to broaden the transmission bandwidth and produce a lower envelope boundary of transmission for unit cells of different effective refractive indices. According to the theory, cells of all effective refractive indices can be built to achieve unitary transmission at center working frequencies. The working frequency can be tuned by adjusting the length of the IML. Numerical simulations based on finite element analysis are used to validate the theoretical predictions. The high transmission and low dispersive index nature of our designs are further verified by experiments within a broad frequency band of over 1.4 kHz centered at 2.86 kHz. Our design approach can be useful in various wavefront engineering applications.

Cost estimators for construction of forest roads in the central Appalachians

Treesearch

Deborah, A. Layton; Chris O. LeDoux; Curt C. Hassler; Curt C. Hassler

1992-01-01

Regression equations were developed for estimating the total cost of road construction in the central Appalachian region. Estimators include methods for predicting total costs for roads constructed using hourly rental methods and roads built on a total-job bid basis. Results show that total-job bid roads cost up to five times as much as roads built than when equipment...

Comparison of special judo fitness test and dynamic and isometric judo chin-up tests’ performance and classificatory tables’ development for cadet and junior athletes

PubMed Central

Agostinho, Marcus Fábio; Junior, José Alfredo Olivio; Stankovic, Nemanja; Escobar-Molina, Raquel; Franchini, Emerson

2018-01-01

The aims of this work were to compare the performances of male and female cadet and junior judo athletes and to develop classificatory tables to these judo-specific tests for international-level from these ages. Data collected during training camps of male and female cadet and junior judo teams from three nations (Brazil, Serbia, and Spain) were analyzed, totalizing 252 individual results of special judo fitness test (SJFT), and 222 and 208 of dynamic and isometric judogi chin-up tests, respectively. Juniors performed better than cadets in the SJFT, with higher number of throws in A, B, C, and total (P<0.001 for all comparisons), lower final heart rate (P=0.021), and lower index (P<0.001), as well as higher relative performance in the dynamic chin-up test (P<0.001). Furthermore, male athletes presented better performance compared to female athletes in the SJFT (higher number of throws in A, B and total, and lower index) and in the isometric and dynamic chin-up tests (higher absolute and relative performances) (P<0.001 for all comparisons). Considering these differences, tables were established by sex and age groups, using percentile values. Thereby, each of the parameters of the SJFT (number of throws, heart rate after and 1 min after the test, and SJFT index), as well as absolute and relative results in chin-up judogi tests, were classified by sex and age. These classificatory tables can be useful for judo coaches to monitor specific physical performance during different phases of periodization process. PMID:29740559

The Impact of Subject Indexes on Semantic Indeterminacy in Enterprise Document Retrieval

ERIC Educational Resources Information Center

Schymik, Gregory

2012-01-01

Ample evidence exists to support the conclusion that enterprise search is failing its users. This failure is costing corporate America billions of dollars every year. Most enterprise search engines are built using web search engines as their foundations. These search engines are optimized for web use and are inadequate when used inside the…

Hans Bethe, Powering the Stars, and Nuclear Physics

Science.gov Websites

dropdown arrow Site Map A-Z Index Menu Synopsis Hans Bethe, Energy Production in Stars, and Nuclear Physics physics, built atomic weapons, and called for a halt to their proliferation. Bethe's dual legacy is one of Laboratory] from 1943 to 1946. Prior to joining the Manhattan Project, Bethe taught physics at Cornell

Diversity of tree vegetation on different slopes in Sangkulirang – Mangkalihat exokarst area

NASA Astrophysics Data System (ADS)

Suwasono, R. A.; Matius, P.; Sutedjo

2018-04-01

The Karst ecosystem in East Kalimantan is predominantly located in the Sangkulirang-Mangkalihat covering an area of 1,867,676 hectares. The exokarst are all features that may be found on a surface karst landscape. The objective of this study was to determine the diversity of tree vegetation (diameters >10 cm) on different slopes. Six study locations were selected as replications where each location consisted of the different of slopes. The sample plot was set up 15 plots in each location on quadrants of 10 m x 10 m. 538 individuals had been found in the study sites consisting of 163 species, 100 genera and 43 family. The Dipterocarpaceae was dominant on slopes and the upper ridges, while Shorea sp. has dominated on the upper ridges. The highest diversity index (H’) of 4.04were found on the slopes and valley while the Species Richness Index (R) and Evenness Index (e) were high in all three slopes. The highest Similarity Index (ISs) of41.06was in the slopes and valley, while the highest Decimilarity Index (ID) of 67.30were in the slopes and upper ridges. Meanwhile, the overall diversity of species in the Sangkulirang-Mangkalihat exokarst area is high.

Urban expansion simulation and the spatio-temporal changes of ecosystem services, a case study in Atlanta Metropolitan area, USA.

PubMed

Sun, Xiao; Crittenden, John C; Li, Feng; Lu, Zhongming; Dou, Xiaolin

2018-05-01

Urban expansion can lead to land use changes and, hence, threatens the ecosystems. Understanding the effects of urbanization on ecosystem services (ESs) can provide scientific guidance for land use planning and the protection of ESs. We established a framework to assess the spatial distributions of ESs based on land use changes in the Atlanta Metropolitan area (AMA) from 1985 to 2012. A new comprehensive ecosystem service (CES) index was developed to reflect the comprehensive level of ESs. Associated with the influential factors, we simulated the business as usual scenario in 2030. Four alternative scenarios, including more compact growth (MCG), riparian vegetation buffer (RVB), soil conservation (SC), and combined development (CD) scenarios were developed to explore the optimal land use strategies which can enhance the ESs. The results showed that forest and wetland had the greatest decreases, while low and high intensity built-up lands had the greatest increases. The values of CES and most of ESs decreased significantly due to the sprawling expansion of built-up land. The scenario analysis revealed that the CD scenario performs best in CES value, while it performs the worst in food supply. Compared with the RVB and SC scenarios, MCG scenario is a more optimal land use strategy to enhance the ESs without at the expense of food supply. To integrate multiple ESs into land use planning and decision making, corresponding land management policies and ecological engineering measures should be implemented to enhance: (1) the water yield and water purification in urban core counties, (2) the carbon storage, habitat quality, and recreational opportunity in counties around the core area, and (3) the soil conservation and food supply in surrounding suburban counties. The land use strategies and ecological engineering measures in this study can provide references for enhancing the ESs in the AMA and other metropolitan areas. Copyright © 2017 Elsevier B.V. All rights reserved.

Polychlorinated biphenyl concentrations, accumulation rates in soil from atmospheric deposition and analysis of their affecting landscape variables along an urban-rural gradient in Shanghai, China.

PubMed

Fang, Shubo; Cui, Qu; Matherne, Brian; Hou, Aixin

2017-11-01

This study initiated an in-situ soil experimental system to quantify the annual dynamics of polychlorinated biphenyl (PCB) congener's concentrations and accumulation rates in soil from atmosphere deposition in a rural-urban fringe, and correlated them by landscape physical and demographic variables in the area. The results showed that the concentrations of all PCB congeners significantly increased with the sampling time (p < 0.05); nearly all the PCB congener concentrations decreased while moving outwards from the urban center. The moderate average concentrations along the gradient for PCB 8, 18, and 28 were 31.003, 18.825, and 19.505 ng g-1, respectively. Tetra-CBs including PCB 44, 52, 66, and 77 were 10.243, 31.214, 8.330 and 9.530 ng g-1, respectively. Penta-CBs including PCB 101, 105, 118, and 126 were 9.465, 7.896, 17.703, and 6.363 ng g-1, respectively. Hexa-CBs including PCB 128, 138, 153, 170, 180, and 187 were 6.798, 11.522, 4.969, 6.722, 6.317, and 8.243 ng g-1 respectively. PCB 195, 206, and 209 were 8.259, 9.506, and 14.169 ng g-1, respectively. Most of the PCB congeners had a higher accumulation rate approximately 28 km from the urban center. The computed variables were found to affect the soil PCB concentrations with a threshold effect (p < 0.05). Regression analysis showed that the thresholds were 10-20 km, 1 km/km 2 , 30%, and 20% for distance, road density, population change index, and built-up area percentage, respectively. It was concluded that factors related to industrial development, traffic, and urban sprawling (i.e. built-up areas expanding) were the sources of PCBs. Copyright © 2017 Elsevier Ltd. All rights reserved.

Association between Neighborhood Walkability, Cardiorespiratory Fitness and Body-Mass Index

PubMed Central

Hoehner, Christine M.; Handy, Susan L.; Yan, Yan; Blair, teven N.; Berrigan, David

2011-01-01

Many studies have found cross-sectional associations between characteristics of the neighborhood built environment and physical activity (PA) behavior. However, most are based on self-reported PA, which is known to result in overestimation of PA and differential misclassification by demographic and biological characteristics. Cardiorespiratory fitness (CRF) is an objective marker of PA because it is primarily determined by PA. Furthermore, it is causally related to long-term health outcomes. Therefore, analyses of the association between CRF and built environment could strengthen arguments for the importance of built environment influences on health. We examined the association between neighborhood walkability and CRF and body-mass index (BMI). This cross-sectional analysis included 16,543 adults (5,017 women, 11,526 men) aged 18–90 years with home addresses in Texas who had a comprehensive clinical examination between 1987 and 2005. Outcomes included CRF from total duration on a maximal exercise treadmill test and measured BMI. Three neighborhood walkability factors emerged from principal components analyses of block-group measures derived from the U.S. Census. In multilevel adjusted analyses, the neighborhood walkability factors were significantly associated with CRF and BMI among men and women in the expected direction. An interaction between one of the neighborhood factors and age was also observed. The interaction suggested that living in neighborhoods with older homes and with residents traveling shorter distances to work was more strongly positively associated with CRF among younger adults and more strongly negatively associated with BMI among older adults. In conclusion, neighborhood characteristics hypothesized to support more PA and less driving were associated with higher levels of CRF and lower BMI. Demonstration of an association between built environment characteristics and CRF is a significant advance over past studies based on self-reported PA. Nevertheless, stronger causal evidence depends on more robust study designs and sophisticated measures of the environment, behavior, and their physiological consequences. PMID:22030212

Disentangling neighborhood contextual associations with child body mass index, diet, and physical activity: The role of built, socioeconomic, and social environments

PubMed Central

Carroll-Scott, Amy; Gilstad-Hayden, Kathryn; Rosenthal, Lisa; Peters, Susan M.; McCaslin, Catherine; Joyce, Rebecca; Ickovics, Jeannette R.

2014-01-01

Obesity prevalence among US children and adolescents has tripled in the past three decades. Consequently, dramatic increases in chronic disease incidence are expected, particularly among populations already experiencing health disparities. Recent evidence identifies characteristics of “obesogenic” neighborhood environments that affect weight and weight-related behaviors. This study aimed to examine associations between built, socioeconomic, and social characteristics of a child’s residential environment on body mass index (BMI), diet, and physical activity. We focused on pre-adolescent children living in New Haven, Connecticut to better understand neighborhood environments’ contribution to persistent health disparities. Participants were 1048 fifth and sixth grade students who completed school-based health surveys and physical measures in fall 2009. Student data were linked to US Census, parks, retailer, and crime data. Analyses were conducted using multilevel modeling. Property crimes and living further from a grocery store were associated with higher BMI. Students living within a 5-min walk of a fast food outlet had higher BMI, and those living in a tract with higher density of fast food outlets reported less frequent healthy eating and more frequent unhealthy eating. Students’ reported perceptions of access to parks, playgrounds, and gyms were associated with more frequent healthy eating and exercise. Students living in more affluent neighborhoods reported more frequent healthy eating, less unhealthy eating, and less screen time. Neighborhood social ties were positively associated with frequency of exercise. In conclusion, distinct domains of neighborhood environment characteristics were independently related to children’s BMI and health behaviors. Findings link healthy behaviors with built, social, and socioeconomic environment assets (access to parks, social ties, affluence), and unhealthy behaviors with built environment inhibitors (access to fast food outlets), suggesting neighborhood environments are an important level at which to intervene to prevent childhood obesity and its adverse consequences. PMID:23642646

Introducing ADS 2.0

NASA Astrophysics Data System (ADS)

Accomazzi, Alberto; Kurtz, M. J.; Henneken, E. A.; Grant, C. S.; Thompson, D.; Luker, J.; Chyla, R.; Murray, S. S.

2014-01-01

In the spring of 1993, the Smithsonian/NASA Astrophysics Data System (ADS) first launched its bibliographic search system. It was known then as the ADS Abstract Service, a component of the larger Astrophysics Data System effort which had developed an interoperable data system now seen as a precursor of the Virtual Observatory. As a result of the massive technological and sociological changes in the field of scholarly communication, the ADS is now completing the most ambitious technological upgrade in its twenty-year history. Code-named ADS 2.0, the new system features: an IT platform built on web and digital library standards; a new, extensible, industrial strength search engine; a public API with various access control capabilities; a set of applications supporting search, export, visualization, analysis; a collaborative, open source development model; and enhanced indexing of content which includes the full-text of astronomy and physics publications. The changes in the ADS platform affect all aspects of the system and its operations, including: the process through which data and metadata are harvested, curated and indexed; the interface and paradigm used for searching the database; and the follow-up analysis capabilities available to the users. This poster describes the choices behind the technical overhaul of the system, the technology stack used, and the opportunities which the upgrade is providing us with, namely gains in productivity and enhancements in our system capabilities.

Static and Vibration Analyses of General Wing Structures Using Equivalent Plate Models

NASA Technical Reports Server (NTRS)

Kapania, Rakesh K.; Liu, Youhua

1999-01-01

An efficient method, using equivalent plate model, is developed for studying the static and vibration analyses of general built-up wing structures composed of skins, spars, and ribs. The model includes the transverse shear effects by treating the built-up wing as a plate following the Reissner-Mindlin theory, the so-called First-order Shear Deformation Theory (FSDT). The Ritz method is used with the Legendre polynomials being employed as the trial functions. This is in contrast to previous equivalent plate model methods which have used simple polynomials, known to be prone to numerical ill-conditioning, as the trial functions. The present developments are evaluated by comparing the results with those obtained using MSC/NASTRAN, for a set of examples. These examples are: (i) free-vibration analysis of a clamped trapezoidal plate with (a) uniform thickness, and (b) non-uniform thickness varying as an airfoil, (ii) free-vibration and static analyses (including skin stress distribution) of a general built-up wing, and (iii) free-vibration and static analyses of a swept-back box wing. The results obtained by the present equivalent plate model are in good agreement with those obtained by the finite element method.

Hierarchical Distributed-Lag Models: Exploring Varying Geographic Scale and Magnitude in Associations Between the Built Environment and Health.

PubMed

Baek, Jonggyu; Sanchez-Vaznaugh, Emma V; Sánchez, Brisa N

2016-03-15

It is well known that associations between features of the built environment and health depend on the geographic scale used to construct environmental attributes. In the built environment literature, it has long been argued that geographic scales may vary across study locations. However, this hypothesized variation has not been systematically examined due to a lack of available statistical methods. We propose a hierarchical distributed-lag model (HDLM) for estimating the underlying overall shape of food environment-health associations as a function of distance from locations of interest. This method enables indirect assessment of relevant geographic scales and captures area-level heterogeneity in the magnitudes of associations, along with relevant distances within areas. The proposed model was used to systematically examine area-level variation in the association between availability of convenience stores around schools and children's weights. For this case study, body mass index (weight kg)/height (m)2) z scores (BMIz) for 7th grade children collected via California's 2001-2009 FitnessGram testing program were linked to a commercial database that contained locations of food outlets statewide. Findings suggested that convenience store availability may influence BMIz only in some places and at varying distances from schools. Future research should examine localized environmental or policy differences that may explain the heterogeneity in convenience store-BMIz associations. © The Author 2016. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

USEPA Environmental Quality Index (EQI) and Associated Domain Indices by County for the United States

EPA Pesticide Factsheets

The US Environmental Protection Agency's (EPA) National Health and Environmental Effects Research Laboratory (NHEERL) in the Environmental Public Health Division (EPHD) is currently engaged in research aimed at developing a measure that estimates overall environmental quality at the county level for the United States. This work is being conducted as an effort to learn more about how various environmental factors simultaneously contribute to health disparities in low-income and minority populations, and to better estimate the total environmental and social context to which humans are exposed. This dataset contains the finalized Environmental Quality Index (EQI), and an index for each of the associated domains (air, water, land, built environment, and sociodemographic environment). Indices are at the county level for all counties in the United States.

Shock response of poly[methyl methacrylate] (PMMA) measured with embedded electromagnetic gauges

NASA Astrophysics Data System (ADS)

Lacina, David; Neel, Christopher; Dattelbaum, Dana

2018-05-01

The shock response of poly[methyl methacrylate] (PMMA) acquired from two providers, Spartech and Rohm & Haas, has been measured to investigate the shock response variations related to material pedigree. These measurements have also been used to examine the effects of viscoelasticity on Spartech PMMA. Measurements of the Hugoniot curves, release wave speeds, and index of refraction have been acquired up to previously unexplored stresses, ˜10.7 GPa, for Spartech PMMA. In-situ, time-resolved particle velocity wave profiles, as a function of time and depth, were obtained using twelve separate electromagnetic gauge elements embedded at different depths in the PMMA. A comparison of the new data to the shock response data for Rohm and Haas PMMA, used as a "standard" material in shock compression studies, shows that there are no significant differences in shock response for the two materials. From the index of refraction measurements, the apparent particle velocity correction for a PMMA window exhibits an interesting oscillation, increasing at up = 0.3 km/s after decreasing up to that point. The results are generalized into guidelines for sourcing PMMA for use in shock studies.

Differences in the Community Built Environment Influence Poor Perceived Health among Persons with Spinal Cord Injury

PubMed Central

Botticello, Amanda L.; Rohrbach, Tanya; Cobbold, Nicolette

2015-01-01

Objectives To assess the association between characteristics of the built environment and differences in perceived health among persons with spinal cord injury (SCI) using objective measures of the local community derived from Geographic Information Systems (GIS) data. Design Secondary analysis of cross-sectional survey data. Setting Community. Participants 503 persons with chronic SCI enrolled in the Spinal Cord Injury Model Systems (SCIMS) database. All cases were residents of New Jersey, completed an interview during the years 2000–2012, had a complete residential address, and were community living at the time of follow-up. Intervention Not applicable. Main Outcome Measure Perceived health. Results Bivariate tests indicated that persons with SCI residing in communities with more (versus less) mixed land use and small (versus large) amounts of open space were more likely to report poor perceived health. No associations were found between perceived health and differences in the residential or destination density of the community. Adjusting for variation in demographic, impairment, quality of life, and community socioeconomic characteristics accounted for the gap in the odds of reporting poor health between persons living in areas with large versus small amounts of open space (OR 0.54; 95% CI 0.28–1.02). However, even after accounting for individual background differences, persons living in communities characterized by more heterogeneous land use were twice as likely to report poor health compared to persons living in less mixed areas (OR 2.14; 95% CI 1.12–4.08). Conclusions Differences in the built characteristics of communities may be important to the long-term health and well-being of persons with SCI who may have greater exposure to the features of their local area due to limited mobility. The results of this study suggest living in a community with more heterogeneous land use was not beneficial to the perceived health of persons with chronic SCI living in New Jersey. Further investigation is needed to assess if the relationships observed in this analysis are influenced by differences in infrastructure and resources across communities. Further research is also needed to investigate the role built environment plays in the long-term health and well-being of persons with SCI in other geographic locales. PMID:25998221

Differences in the Community Built Environment Influence Poor Perceived Health Among Persons With Spinal Cord Injury.

PubMed

Botticello, Amanda L; Rohrbach, Tanya; Cobbold, Nicolette

2015-09-01

To assess the association between characteristics of the built environment and differences in perceived health among persons with spinal cord injury (SCI) using objective measures of the local community derived from Geographic Information Systems data. Secondary analysis of cross-sectional survey data. Community. Persons with chronic SCI enrolled in the Spinal Cord Injury Model Systems database (N=503). All cases were residents of New Jersey, completed an interview during the years 2000 through 2012, had a complete residential address, and were community living at the time of follow-up. Not applicable. Perceived health. Bivariate tests indicated that persons with SCI residing in communities with more (vs less) mixed land use and small (vs large) amounts of open space were more likely to report poor perceived health. No associations were found between perceived health and differences in the residential or destination density of the community. Adjusting for variation in demographic, impairment, quality of life, and community socioeconomic characteristics accounted for the gap in the odds of reporting poor health between persons living in areas with large versus small amounts of open space (odds ratio [OR], 0.54; 95% confidence interval [CI], 0.28-1.02). However, even after accounting for individual background differences, persons living in communities characterized by more heterogeneous land use were twice as likely to report poor health compared with persons living in less mixed areas (OR, 2.14; 95% CI, 1.12-4.08). Differences in the built characteristics of communities may be important to the long-term health and well-being of persons with SCI who may have greater exposure to the features of their local area because of limited mobility. The results of this study suggest living in a community with more heterogeneous land use was not beneficial to the perceived health of persons with chronic SCI living in New Jersey. Further investigation is needed to assess if the relationships observed in this analysis are influenced by differences in infrastructure and resources across communities. Further research is also needed to investigate the role built environment plays in the long-term health and well-being of persons with SCI in other geographic locales. Copyright © 2015 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

[Frail-VIG index: Design and evaluation of a new frailty index based on the Comprehensive Geriatric Assessment].

PubMed

Amblàs-Novellas, Jordi; Martori, Joan Carles; Molist Brunet, Núria; Oller, Ramon; Gómez-Batiste, Xavier; Espaulella Panicot, Joan

Frailty is closely linked to health results. Frailty indexes (FI) and the Comprehensive Geriatric Assessment (CGA) are multidimensional tools. FI serve to quantitatively measure frailty levels. They have shown to have an excellent correlation with mortality. However, they are infrequently used in clinical practice. Given the need for new, more concise, and pragmatic FI, a new FI is proposed based on a CGA (Frail-VIG Index). A prospective, observational, longitudinal study was conducted, with cohort follow up at 12 months or death. Participants were patients admitted in the Geriatric Unit of the University Hospital of Vic (Barcelona, Spain) during 2014. Contrast of hypothesis log-rank for survival curves according to Frail-VIG index, and analysis of ROC curves were performed to assess prognostic capacity. A total of 590 patients were included (mean age=86.39). Mortality rate at 12 months was 46.4%. The comparative analysis showed statistically significant differences (P<.05) for almost all variables included in the Frail-VIG index. Survival curves also show significant differences (X 2 =445, P<.001) for the different Frail-VIG index scores. The area under the ROC curve at 12 months was 0.9 (0.88-0.92). An administration time of the Index is estimated at less than 10minutes. Results endorse the Frail-VIG index as a simple (as for contents), rapid (for administration time) tool, with discriminative (for situational diagnosis) and predictive capacity (high correlation with mortality). Copyright © 2016 SEGG. Publicado por Elsevier España, S.L.U. All rights reserved.

Current Risk Adjustment and Comorbidity Index Underperformance in Predicting Post-Acute Utilization and Hospital Readmissions After Joint Replacements: Implications for Comprehensive Care for Joint Replacement Model.

PubMed

Kumar, Amit; Karmarkar, Amol; Downer, Brian; Vashist, Amit; Adhikari, Deepak; Al Snih, Soham; Ottenbacher, Kenneth

2017-11-01

To compare the performances of 3 comorbidity indices, the Charlson Comorbidity Index, the Elixhauser Comorbidity Index, and the Centers for Medicare & Medicaid Services (CMS) risk adjustment model, Hierarchical Condition Category (HCC), in predicting post-acute discharge settings and hospital readmission for patients after joint replacement. A retrospective study of Medicare beneficiaries with total knee replacement (TKR) or total hip replacement (THR) discharged from hospitals in 2009-2011 (n = 607,349) was performed. Study outcomes were post-acute discharge setting and unplanned 30-, 60-, and 90-day hospital readmissions. Logistic regression models were built to compare the performance of the 3 comorbidity indices using C statistics. The base model included patient demographics and hospital use. Subsequent models included 1 of the 3 comorbidity indices. Additional multivariable logistic regression models were built to identify individual comorbid conditions associated with high risk of hospital readmissions. The 30-, 60-, and 90-day unplanned hospital readmission rates were 5.3%, 7.2%, and 8.5%, respectively. Patients were most frequently discharged to home health (46.3%), followed by skilled nursing facility (40.9%) and inpatient rehabilitation facility (12.7%). The C statistics for the base model in predicting post-acute discharge setting and 30-, 60-, and 90-day readmission in TKR and THR were between 0.63 and 0.67. Adding the Charlson Comorbidity Index, the Elixhauser Comorbidity Index, or HCC increased the C statistic minimally from the base model for predicting both discharge settings and hospital readmission. The health conditions most frequently associated with hospital readmission were diabetes mellitus, pulmonary disease, arrhythmias, and heart disease. The comorbidity indices and CMS-HCC demonstrated weak discriminatory ability to predict post-acute discharge settings and hospital readmission following joint replacement. © 2017, American College of Rheumatology.

E2FM: an encrypted and compressed full-text index for collections of genomic sequences.

PubMed

Montecuollo, Ferdinando; Schmid, Giovannni; Tagliaferri, Roberto

2017-09-15

Next Generation Sequencing (NGS) platforms and, more generally, high-throughput technologies are giving rise to an exponential growth in the size of nucleotide sequence databases. Moreover, many emerging applications of nucleotide datasets-as those related to personalized medicine-require the compliance with regulations about the storage and processing of sensitive data. We have designed and carefully engineered E 2 FM -index, a new full-text index in minute space which was optimized for compressing and encrypting nucleotide sequence collections in FASTA format and for performing fast pattern-search queries. E 2 FM -index allows to build self-indexes which occupy till to 1/20 of the storage required by the input FASTA file, thus permitting to save about 95% of storage when indexing collections of highly similar sequences; moreover, it can exactly search the built indexes for patterns in times ranging from few milliseconds to a few hundreds milliseconds, depending on pattern length. Source code is available at https://github.com/montecuollo/E2FM . ferdinando.montecuollo@unicampania.it. Supplementary data are available at Bioinformatics online. © The Author (2017). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Fluid-Structure Interaction in a Fluid-Filled Composite Structure Subjected to Low Velocity Impact

DTIC Science & Technology

2016-06-01

for creating an E-glass composite cubic structure and a pendulum was designed and built to provide a repeatable low velocity impact. The behavior of...structure and a pendulum was designed and built to provide a repeatable low velocity impact. The behavior of the composite structure was studied at various...SET-UP .......................................................31  1.  Impact Pendulum

Bridging the Gap: A Synthesis of Research into the Supply and the Demand of Built Environment Education in Schools. Engaging Places Research Summary

ERIC Educational Resources Information Center

Kendall, Sally; Murfield, Jenny; White, Richard; Wilkin, Anne

2007-01-01

"Engaging Places" is a partnership between the Department for Culture Media and Sport (DCMS), English Heritage, the Commission for Architecture and the Built Environment (CABE), in association with the Department for Children, Schools and Families (DCSF--formerly DfES) and the Academy for Sustainable Communities (ASC). It was set up by…

Light Material Ripped Up Older Dark Vein Material

NASA Image and Video Library

2015-11-11

This view from the Mars Hand Lens Imager (MAHLI) on the arm of NASA's Curiosity Mars rover shows a combination of dark and light material within a mineral vein at a site called "Garden City" on lower Mount Sharp. The image was taken on April 4, 2015, during the 946th Martian day, or sol, of Curiosity's work on Mars. The area shown is roughly 1 inch (2.5 centimeters) wide. Differences in textures of light-toned veins in the Garden City complex of crisscrossing mineral veins are clues that these veins may result from distinct fluid events. This example shows where a later addition of light-toned material into a vein ripped up prior dark material, suggesting both high fluid pressure and potentially explosive release of high pressures. Different examples are at PIA19925 and PIA19926. Mineral veins often form where fluids move through fractured rocks, depositing minerals in the fractures and affecting chemistry of the surrounding rock. At Garden City, the veins have been more resistant to erosion than the surrounding host rock. The fluid movement through fractures at Garden City occurred later than wet environmental conditions in which the host rock formed, before it hardened and cracked. Malin Space Science Systems, San Diego, built and operates MAHLI. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology in Pasadena, manages the Mars Science Laboratory Project for the NASA Science Mission Directorate, Washington. JPL designed and built the project's Curiosity rover. http://photojournal.jpl.nasa.gov/catalog/PIA19927

Analysis of Urban Expansion of the Resort City of Al Ain Using Remote Sensing and GIS

NASA Astrophysics Data System (ADS)

Issa, S.; Al Shuwaihi, A.

2009-12-01

The urban growth of AL Ain city has been investigated using remote sensing data for three different dates, 1972, 1990 and 2000. We used three Landsat images together with socio-economic data in a post-classification analysis to map the spatial dynamics of land use/cover changes and identify the urbanization process in Al Ain resort city, United Arab Emirates. Land use/cover statistics, extracted from Landsat Multi-spectral Scanner (MSS). Thematic Mapper (TM) and Enhanced Thematic Mapper plus (ETM +) images for 1972. 1990 and 2000 respectively, revealed that the built-up area has expanded by about 170.53km2. The city was found to have a tendency for major expansion in four different directions: along the Abu Dhabi highway, along Dubai highway, Myziad direction and Hafeet recreational area. Expansion in any direction was found to be governed by the availability of road network, suitability for construction, utilities, economic activities, geographical constraints, and legal factors (boundary with Sultanate of Oman). The road network in particular has influenced the spatial patterns and structure of urban development, so that the expansion of the built-up areas has assumed an accretive as well as linear growth along the major roads. The research concludes that the development is based on conservation of agricultural areas (oases) and reclamation of the desert for farming and agricultural activities. The integration of remote sensing and GIS was found to be effective in monitoring LULC changes and providing valuable information necessary for planning and research.

Healthy Life Style Behaviors of University Students of School of Physical Education and Sports in Terms of Body Mass Index and Other Variables

ERIC Educational Resources Information Center

Bozlar, Volkan; Arslanoglu, Cansel

2016-01-01

The aim of this study is to determine Healthy Lifestyle Behaviors of students in the Schools of Physical Education and Sport (SPES) utilizing Body Mass Index (BMI) and other various variables. The study is composed of 1,695 students studying in SPES, in 14 different universities across Turkey. It is made up of 1,067 male and 624 female students.…

Pulmonary hemodynamics and gas exchange in off pump coronary artery bypass grafting.

PubMed

Vedin, Jenny; Jensen, Ulf; Ericsson, Anders; Samuelsson, Sten; Vaage, Jarle

2005-10-01

To investigate the influence of cardiopulmonary bypass on pulmonary hemodynamics and gas exchange. Low risk patients admitted for elective coronary artery bypass grafting were randomized to either on (n=25) or off pump (n=25) surgery. Central hemodynamics, gas exchange, and venous admixture were studied during and up to 20 h after surgery. There was no difference in pulmonary vascular resistance index (P=0.16), right ventricular stroke work index (P>0.2), mean pulmonary artery pressure (P>0.2) or pulmonary capillary wedge pressure (P>0.2) between groups. Soon after surgery there was a tendency towards higher cardiac index (P=0.07) in the off pump group. Arterial oxygen tension (P>0.2), hematocrit (P>0.2), venous admixture (P>0.2), and arterial-venous oxygen content difference (P=0.12) did not differ between groups. This prospective, randomized study showed no difference in pulmonary hemodynamics, pulmonary gas exchange, and venous admixture, in low risk patients undergoing off pump compared to on pump coronary artery bypass surgery.

Extruder scale-up assessment in the process of extrusion-spheronization: comparison of radial and axial systems by a design of experiments approach.

PubMed

Désiré, Amélie; Paillard, Bruno; Bougaret, Joël; Baron, Michel; Couarraze, Guy

2013-02-01

Scaling-up the extrusion-spheronization process involves the separate scale-up of each of the five process steps: dry mixing, granulation, extrusion, spheronization, and drying. The aim of the study was to compare two screw extrusion systems regarding their suitability for scaling-up. Two drug substances of high- and low-solubility in water were retained at different concentrations as formulation variables. Different spheronization times were tested. The productivity of the process was followed up using the extrusion rate and yield. Pellets were characterized by their size and shape, and by their structural and mechanical properties. A response surface design of experiments was built to evaluate the influence of the different variables and their interactions on each response, and to select the type of extrusion which provides the best results in terms of product quality, the one which shows less influence on the product after scale-up ("scalability") and when the formula used changes ("robustness"), and the one which allows the possibility to adjust pellet properties with spheronization variables ("flexibility"). Axial system showed the best characteristics in terms of product quality at lab and industrial scales, the best robustness at industrial scale, and the best scalability, by comparison with radial system. Axial system thus appeared as the easiest scaled-up system. Compared to lab scale, the conclusions observed at industrial scale were the same in terms of product quality, but different for robustness and flexibility, which confirmed the importance to test the systems at industrial scale before acquiring the equipment.

75 FR 64371 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Order Granting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-19

... Rule Change To List Series With Up to 12 Expiration Months for Broad-Based Security Index Options Upon... list series with up to 12 expiration months for options that overlie broad- based security indexes for...)(2), Terms of Index Options, to allow the Exchange to list series with up to 12 expiration months for...

Changes in the Built Environment and Changes in the Amount of Walking Over Time: Longitudinal Results From the Multi-Ethnic Study of Atherosclerosis

PubMed Central

Hirsch, Jana A.; Moore, Kari A.; Clarke, Philippa J.; Rodriguez, Daniel A.; Evenson, Kelly R.; Brines, Shannon J.; Zagorski, Melissa A.; Diez Roux, Ana V.

2014-01-01

Lack of longitudinal research hinders causal inference on the association between the built environment and walking. In the present study, we used data from 6,027 adults in the Multi-Ethnic Study of Atherosclerosis who were 45–84 years of age at baseline to investigate the association of neighborhood built environment with trends in the amount of walking between 2000 and 2012. Walking for transportation and walking for leisure were assessed at baseline and at 3 follow-up visits (median follow-up = 9.15 years). Time-varying built environment measures (measures of population density, land use, number of destinations, bus access, and street connectivity) were created using geographic information systems. We used linear mixed models to estimate the associations between baseline levels of and a change in each built environment feature and a change in the frequency of walking. After adjustment for potential confounders, we found that higher baseline levels of population density, area zoned for retail, social destinations, walking destinations, and street connectivity were associated with greater increases in walking for transportation over time. Higher baseline levels of land zoned for residential use and distance to buses were associated with less pronounced increases (or decreases) in walking for transportation over time. Increases in the number of social destinations, the number of walking destinations, and street connectivity over time were associated with greater increases in walking for transportation. Higher baseline levels of both land zoned for retail and walking destinations were associated with greater increases in leisure walking, but no changes in built environment features were associated with leisure walking. The creation of mixed-use, dense developments may encourage adults to incorporate walking for transportation into their everyday lives. PMID:25234431

Twenty year multi-follow-up of different types of hallucinations in schizophrenia, schizoaffective disorder, bipolar disorder, and depression.

PubMed

Goghari, Vina M; Harrow, Martin

2016-10-01

Hallucinations are a salient feature of both psychotic and mood disorders. Currently there is a call for more research on the phenomenology of different forms of hallucinations, in a broader array of disorders, to further both theoretical knowledge and clinical utility. We investigated auditory, visual, and olfactory hallucinations at index hospitalization and auditory and visual hallucinations prospectively for 20years in 150 young patients, namely 51 schizophrenia, 25 schizoaffective, 28 bipolar, and 79 unipolar depression. For the index hospitalization, the data showed schizophrenia and schizoaffective patients had a greater rate of auditory and visual hallucinations than bipolar and depression patients. However, over the longitudinal trajectory of their illness, a greater percentage of schizophrenia patients had auditory and visual hallucinations than schizoaffective patients, as well as bipolar and depression patients. Also, in contrast to the initial period, schizoaffective patients did not differentiate themselves over the follow-up period from bipolar patients. Bipolar and depression patients did not significantly differ at index hospitalization or at follow-up. We found visual hallucinations differentiated the groups to a greater degree over the 20year course than did auditory hallucinations. These findings suggest the longitudinal course is more important for differentiating schizophrenia and schizoaffective disorder, whereas the initial years may be more useful to differentiate schizoaffective disorder from bipolar disorder. Furthermore, we found that the early presence of auditory hallucinations was associated with a reduced likelihood for a future period of recovery. No olfactory hallucinations were present at the index hospitalization in any patients. Over the course of 20years, a minority of schizophrenia patients presented with olfactory hallucinations, and very few schizoaffective and bipolar patients presented with olfactory hallucinations. This study underscores the importance of the longitudinal course of symptoms to understand the relationship between related disorders and recovery. Copyright © 2016 Elsevier B.V. All rights reserved.

Validation of nomograms for overall survival, cancer-specific survival, and recurrence in carcinoma of the major salivary glands.

PubMed

Hay, Ashley; Migliacci, Jocelyn; Zanoni, Daniella Karassawa; Patel, Snehal; Yu, Changhong; Kattan, Michael W; Ganly, Ian

2018-05-01

The purpose of this study was to investigate the performance of the Memorial Sloan Kettering Cancer Center salivary carcinoma nomograms predicting overall survival, cancer-specific survival, and recurrence with an external validation dataset. The validation dataset comprised 123 patients treated between 2010 and 2015 at our institution. They were evaluated by assessing discrimination (concordance index [C-index]) and calibration (plotting predicted vs actual probabilities for quintiles). The validation cohort (n = 123) showed some differences to the original cohort (n = 301). The validation cohort had less high-grade cancers (P = .006), less lymphovascular invasion (LVI; P < .001) and shorter follow-up of 19 months versus 45.6 months. Validation showed a C-index of 0.833 (95% confidence interval [CI] 0.758-0.908), 0.807 (95% CI 0.717-0.898), and 0.844 (95% CI 0.768-0.920) for overall survival, cancer-specific survival, and recurrence, respectively. The 3 salivary gland nomograms performed well using a contemporary validation dataset, despite limitations related to sample size, follow-up, and differences in clinical and pathology characteristics between the original and validation cohorts. © 2018 Wiley Periodicals, Inc.

Community Social Capital, Built Environment, and Income-Based Inequality in Depressive Symptoms Among Older People in Japan: An Ecological Study From the JAGES Project.

PubMed

Haseda, Maho; Kondo, Naoki; Ashida, Toyo; Tani, Yukako; Takagi, Daisuke; Kondo, Katsunori

2018-03-05

Although reducing socioeconomic inequalities in depression is necessary, their associated factors have rarely been studied. This study aimed to screen the potential contextual factors associated with income-based inequality in older adults' depression. Using data from the Japan Gerontological Evaluation Study (JAGES) of 2013, we conducted an ecological study covering 77 communities in Japan. Our measures of socioeconomic inequalities in depression were the slope index of inequalities (SII) and the relative index of inequalities (RII) of the prevalence of depressive symptoms across three income levels. We categorized available community-level factors, including socio-demographic factors, social participation, social relationships, subjective changes in the residential area, and the built environment. These indicators were aggregated from individual responses of 51,962 and 52,958 physically independent men and women, respectively, aged 65 years or more. We performed multiple linear regression analyses to explore factors with statistical significance of a two-tailed P-value less than 0.05. Factors associated with shallower gradients in depression for men included higher participation in local activities and reception or provision of social support, which did not show significant association among women. Perceived increases in unemployment and economic inequalities were positively associated with larger inequalities in both genders (P < 0.05). The built environment did not indicate any significant association. A community environment fostering social activities and relationships might be associated with smaller income-based inequalities in depression. There is a need for more deterministic studies for planning of effective community interventions to address socioeconomic inequalities in depression.

S4. ASYMMETRIC DRUG-INDUCED PARKINSONISM IS RELATED TO PSYCHOPATHOLOGY

PubMed Central

Pieters, Lydia; Bakker, P Roberto; Van Harten, Peter N

2018-01-01

Abstract Background Drug-Induced Parkinsonism (DIP) is the most common movement disorder induced by antipsychotics. The prevalence of DIP in chronic psychiatric populations ranges between 17 and 72% (1–3). Although, DIP is mostly symmetric, asymmetric DIP is reported in 18 to 54% of the patients. (4). There are no studies to the clinical relevance of asymmetric DIP. We investigated the prevalence of motor asymmetry in DIP and its relationship to the severity of psychopathology in a prospective study. Methods In a cohort study of 207 long-stay psychiatric inpatients the prevalence of DIP was assessed at least two times (mean follow-up 1.1 year) in each patient (5). DIP was assessed with the Unified Parkinson Disease Rating Scale (UPDRS) and the prevalence of persistent DIP was 56.2%. Patients with at least one time parkinsonism in the upper/lower limb(s) were included for analyses. Asymmetry of parkinsonism was calculated with the symmetry index (Figure 1). A cut-off value of ≥ 0,20 was used for the definition of asymmetric DIP. Multilevel mixed models were built to explore the relationship between asymmetry in DIP and the severity of psychopathology, measured on the Clinical Global Impression-Schizophrenia scale severity index (CGI-SCH SI). Results In a cohort study of 207 long-stay psychiatric inpatients the prevalence of DIP was assessed at least two times (mean follow-up 1.1 year) in each patient (5). DIP was assessed with the Unified Parkinson Disease Rating Scale (UPDRS) and the prevalence of persistent DIP was 56.2%. Patients with at least one time parkinsonism in the upper/lower limb(s) were included for analyses. Asymmetry of parkinsonism was calculated with the symmetry index (Figure 1). A cut-off value of ≥ 0,20 was used for the definition of asymmetric DIP. Multilevel mixed models were built to explore the relationship between asymmetry in DIP and the severity of psychopathology, measured on the Clinical Global Impression-Schizophrenia scale severity index (CGI-SCH SI). Discussion DIP is asymmetric in 1 of 5 patients. Therefore, the clinical rule that Parkinson’s disease always starts asymmetrically and such may be helpful to differentiate between Parkinson’s disease and DIP is not valid. Asymmetric presentation of DIP is of clinical relevance as it is related to the severity of psychopathology. Asymmetric DIP may alert the clinician of more severe psychopathology. Replication is indicated to examine the robustness of the relationship. References 1. Modestin J, Wehrli MV, Stephan PL, Agarwalla P. Evolution of neuroleptic-induced extrapyramidal syndromes under long-term neuroleptic treatment. Schizophr Res. 2008; 100(1–3): 97–107. 2. Janno S, Holi M, Tuisku K, Wahlbeck K. Prevalence of Neuroleptic-Induced Movement Disorders in Chronic Schizophrenia Inpatients. Am J Psychiatry. 2004; 161(1): 160–163. 3. Harten PN Van, Matroos GE, Hoek HW. The prevalence of tardive dystonia, tardive dyskinesia, parkinsonism and akathisia. The Curaçao Extrapyramidal Syndromes Study I. Schizophr Res. 1996; 19(2): 195–203. 4. Shin H, Chung J. Drug-Induced Parkinsonism. J Clin Neurol. 2012; 8: 15–21. 5. Bakker PR, de Groot IW, van Os J, van Harten PN. Long-Stay Psychiatric Patients: A Prospective Study Revealing Persistent Antipsychotic-Induced Movement Disorder. PLoS One. 2011; 6(10): 1–6.

Activity-specific aquatic therapy targeting gait for a patient with incomplete spinal cord injury.

PubMed

Wall, Tracy; Falvo, Lisa; Kesten, Adam

2017-04-01

Aquatic therapy can lead to improved mobility and health in individuals with various conditions. This case report looks at an activity-specific aquatic therapy targeting gait for a patient with incomplete spinal cord injury (iSCI). The patient participated in an individualized aquatic therapy program two times a week for 6 weeks. Assessment occurred prior to the intervention. There were two follow-up assessments after the intervention. Follow-up assessment 1 was completed within the same week as the final intervention. Follow-up assessment 2 was completed 4 weeks after the first follow-up to assess for carryover. Improvements that met minimal detectable change and minimal clinically important difference were noted in The Walking for Spinal Cord Injury Index-II, Spinal Cord Injury Functional Ambulation Index gait parameters, and gait speed. An activity-specific aquatic therapy program improved gait in a patient with iSCI. The properties of water create a practical environment for safe practice of skills. Further studies are warranted in large samples.

Diagnostic X-Multi-Axis Beamline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paul, A C

Tomographic reconstruction of explosive events require time resolved multipal lines of sight. Considered here is a four (or eight) line of sight beam layout for a nominal 20 MeV 2000 Ampere 2 microsecond electron beam for generation of x-rays 0.9 to 5 meters from a given point, the ''firing point''. The requirement of a millimeter spatial x-ray source requires that the electron beam be delivered to the converter targets with sub-millimeter precision independent of small variations in beam energy and initial conditions. The 2 usec electron beam pulse allows for four bursts in each line, separated in time by aboutmore » 500 microseconds. Each burst is divided by a electro-magnetic kicker into four (or eight) pulses, one for each beamline. The arrival time of the four (or eight) beam pulses at the x-ray target can be adjusted by the kicker timing and the sequence that the beams of each burst are switched into the different beamlines. There exists a simple conceptual path from a four beamline to a eight beamline upgrade. The eight line beamline is built up from seven unique types of sub-systems or ''blocks''. The beamline consists of 22 of these functional blocks and contains a total of 455 individual magnets, figure 1. The 22 blocks are inter-connected by a total of 30 straight line inter-block sections (IBS). Beamlines 1-4 are built from 12 blocks with conceptual layout structure shown in figure 2. Beamlines 5-8 are built with an additional 10 blocks with conceptual layout structure shown in figure 3. This beamline can be thought of as looking like a lollipop consisting of a 42 meter long stick leading to a 60 by 70 meter rectangular candy blob consisting of the eight lines of sight. The accelerator providing the electron beam is at the end of the stick and the firing point is at the center of the blob. The design allows for a two stage implementation. Beamlines 1-3 can be installed to provide a tomographic azimuthal resolution of 45 degrees. An upgrade can later be made by adding beamlines 5-8 azimuthally indexed so as to provide an azimuthal resolution of 22.5 degrees. All eight beamlines point down by 10 degrees (pitch). The x-ray converter target can be located along each beamline anywhere between 0 to 5 meters from the firing point. An example of inter-facing the Diagnostic X facility with the Darht II accelerator located at LANL will be given.« less

Direct-patterned optical waveguides on amorphous silicon films

DOEpatents

Vernon, Steve; Bond, Tiziana C.; Bond, Steven W.; Pocha, Michael D.; Hau-Riege, Stefan

2005-08-02

An optical waveguide structure is formed by embedding a core material within a medium of lower refractive index, i.e. the cladding. The optical index of refraction of amorphous silicon (a-Si) and polycrystalline silicon (p-Si), in the wavelength range between about 1.2 and about 1.6 micrometers, differ by up to about 20%, with the amorphous phase having the larger index. Spatially selective laser crystallization of amorphous silicon provides a mechanism for controlling the spatial variation of the refractive index and for surrounding the amorphous regions with crystalline material. In cases where an amorphous silicon film is interposed between layers of low refractive index, for example, a structure comprised of a SiO.sub.2 substrate, a Si film and an SiO.sub.2 film, the formation of guided wave structures is particularly simple.

The Road to DLCZ Protocol in Rubidium Ensemble

NASA Astrophysics Data System (ADS)

Li, Chang; Pu, Yunfei; Jiang, Nan; Chang, Wei; Zhang, Sheng; CenterQuantum Information, InstituteInterdisciplinary Information Sciences, Tsinghua Univ Team

2017-04-01

Quantum communication is the powerful approach achieving a fully secure information transferal. The DLCZ protocol ensures that photon linearly decays with transferring distance increasing, which improves the success potential and shortens the time to build up an entangled channel. Apart from that, it provides an advanced idea that building up a quantum internet based on different nodes connected to different sites and themselves. In our laboratory, three sets of laser-cooled Rubidium 87 ensemble have been built. Two of them serve as the single photon emitter, which generate the entanglement between ensemble and photon. What's more, crossed AODs are equipped to multiplex and demultiplex optical circuit so that ensemble is divided into 2 hundred of 2D sub-memory cells. And the third ensemble is used as quantum telecommunication, which converts 780nm photon into telecom-wavelength one. And we have been building double-MOT system, which provides more atoms in ensemble and larger optical density.

High-speed bipolar phototransistors in a 180 nm CMOS process.

PubMed

Kostov, P; Gaberl, W; Zimmermann, H

2013-03-01

Several high-speed pnp phototransistors built in a standard 180 nm CMOS process are presented. The phototransistors were implemented in sizes of 40×40 μm 2 and 100×100 μm 2 . Different base and emitter areas lead to different characteristics of the phototransistors. As starting material a p + wafer with a p - epitaxial layer on top was used. The phototransistors were optically characterized at wavelengths of 410, 675 and 850 nm. Bandwidths up to 92 MHz and dynamic responsivities up to 2.95 A/W were achieved. Evaluating the results, we can say that the presented phototransistors are well suited for high speed photosensitive optical applications where inherent amplification is needed. Further on, the standard silicon CMOS implementation opens the possibility for cheap integration of integrated optoelectronic circuits. Possible applications for the presented phototransistors are low cost high speed image sensors, opto-couplers, etc.

Vineyard water status assessment using on-the-go thermal imaging and machine learning.

PubMed

Gutiérrez, Salvador; Diago, María P; Fernández-Novales, Juan; Tardaguila, Javier

2018-01-01

The high impact of irrigation in crop quality and yield in grapevine makes the development of plant water status monitoring systems an essential issue in the context of sustainable viticulture. This study presents an on-the-go approach for the estimation of vineyard water status using thermal imaging and machine learning. The experiments were conducted during seven different weeks from July to September in season 2016. A thermal camera was embedded on an all-terrain vehicle moving at 5 km/h to take on-the-go thermal images of the vineyard canopy at 1.2 m of distance and 1.0 m from the ground. The two sides of the canopy were measured for the development of side-specific and global models. Stem water potential was acquired and used as reference method. Additionally, reference temperatures Tdry and Twet were determined for the calculation of two thermal indices: the crop water stress index (CWSI) and the Jones index (Ig). Prediction models were built with and without considering the reference temperatures as input of the training algorithms. When using the reference temperatures, the best models casted determination coefficients R2 of 0.61 and 0.58 for cross validation and prediction (RMSE values of 0.190 MPa and 0.204 MPa), respectively. Nevertheless, when the reference temperatures were not considered in the training of the models, their performance statistics responded in the same way, returning R2 values up to 0.62 and 0.65 for cross validation and prediction (RMSE values of 0.190 MPa and 0.184 MPa), respectively. The outcomes provided by the machine learning algorithms support the use of thermal imaging for fast, reliable estimation of a vineyard water status, even suppressing the necessity of supervised acquisition of reference temperatures. The new developed on-the-go method can be very useful in the grape and wine industry for assessing and mapping vineyard water status.

Vineyard water status assessment using on-the-go thermal imaging and machine learning

PubMed Central

Gutiérrez, Salvador; Diago, María P.; Fernández-Novales, Juan

2018-01-01

The high impact of irrigation in crop quality and yield in grapevine makes the development of plant water status monitoring systems an essential issue in the context of sustainable viticulture. This study presents an on-the-go approach for the estimation of vineyard water status using thermal imaging and machine learning. The experiments were conducted during seven different weeks from July to September in season 2016. A thermal camera was embedded on an all-terrain vehicle moving at 5 km/h to take on-the-go thermal images of the vineyard canopy at 1.2 m of distance and 1.0 m from the ground. The two sides of the canopy were measured for the development of side-specific and global models. Stem water potential was acquired and used as reference method. Additionally, reference temperatures Tdry and Twet were determined for the calculation of two thermal indices: the crop water stress index (CWSI) and the Jones index (Ig). Prediction models were built with and without considering the reference temperatures as input of the training algorithms. When using the reference temperatures, the best models casted determination coefficients R2 of 0.61 and 0.58 for cross validation and prediction (RMSE values of 0.190 MPa and 0.204 MPa), respectively. Nevertheless, when the reference temperatures were not considered in the training of the models, their performance statistics responded in the same way, returning R2 values up to 0.62 and 0.65 for cross validation and prediction (RMSE values of 0.190 MPa and 0.184 MPa), respectively. The outcomes provided by the machine learning algorithms support the use of thermal imaging for fast, reliable estimation of a vineyard water status, even suppressing the necessity of supervised acquisition of reference temperatures. The new developed on-the-go method can be very useful in the grape and wine industry for assessing and mapping vineyard water status. PMID:29389982

Process for growing a film epitaxially upon an oxide surface and structures formed with the process

DOEpatents

McKee, Rodney Allen; Walker, Frederick Joseph

1998-01-01

A process and structure wherein a film comprised of a perovskite or a spinel is built epitaxially upon a surface, such as an alkaline earth oxide surface, involves the epitaxial build up of alternating constituent metal oxide planes of the perovskite or spinel. The first layer of metal oxide built upon the surface includes a metal element which provides a small cation in the crystalline structure of the perovskite or spinel, and the second layer of metal oxide built upon the surface includes a metal element which provides a large cation in the crystalline structure of the perovskite or spinel. The layering sequence involved in the film build up reduces problems which would otherwise result from the interfacial electrostatics at the first atomic layers, and these oxides can be stabilized as commensurate thin films at a unit cell thickness or grown with high crystal quality to thicknesses of 0.5-0.7 .mu.m for optical device applications.

Process for growing a film epitaxially upon an oxide surface and structures formed with the process

DOEpatents

McKee, Rodney A.; Walker, Frederick J.

1995-01-01

A process and structure wherein a film comprised of a perovskite or a spinel is built epitaxially upon a surface, such as an alkaline earth oxide surface, involves the epitaxial build up of alternating constituent metal oxide planes of the perovskite or spinel. The first layer of metal oxide built upon the surface includes a metal element which provides a small cation in the crystalline structure of the perovskite or spinel, and the second layer of metal oxide built upon the surface includes a metal element which provides a large cation in the crystalline structure of the perovskite or spinel. The layering sequence involved in the film build up reduces problems which would otherwise result from the interfacial electrostatics at the first atomic layers, and these oxides can be stabilized as commensurate thin films at a unit cell thickness or grown with high crystal quality to thicknesses of 0.5-0.7 .mu.m for optical device applications.

Dynamic modelling and estimation of the error due to asynchronism in a redundant asynchronous multiprocessor system

NASA Technical Reports Server (NTRS)

Huynh, Loc C.; Duval, R. W.

1986-01-01

The use of Redundant Asynchronous Multiprocessor System to achieve ultrareliable Fault Tolerant Control Systems shows great promise. The development has been hampered by the inability to determine whether differences in the outputs of redundant CPU's are due to failures or to accrued error built up by slight differences in CPU clock intervals. This study derives an analytical dynamic model of the difference between redundant CPU's due to differences in their clock intervals and uses this model with on-line parameter identification to idenitify the differences in the clock intervals. The ability of this methodology to accurately track errors due to asynchronisity generate an error signal with the effect of asynchronisity removed and this signal may be used to detect and isolate actual system failures.

Combining 'Bottom-Up' and 'Top-Down' Methods to Assess Ethnic Difference in Clearance: Bitopertin as an Example.

PubMed

Feng, Sheng; Shi, Jun; Parrott, Neil; Hu, Pei; Weber, Cornelia; Martin-Facklam, Meret; Saito, Tomohisa; Peck, Richard

2016-07-01

We propose a strategy for studying ethnopharmacology by conducting sequential physiologically based pharmacokinetic (PBPK) prediction (a 'bottom-up' approach) and population pharmacokinetic (popPK) confirmation (a 'top-down' approach), or in reverse order, depending on whether the purpose is ethnic effect assessment for a new molecular entity under development or a tool for ethnic sensitivity prediction for a given pathway. The strategy is exemplified with bitopertin. A PBPK model was built using Simcyp(®) to simulate the pharmacokinetics of bitopertin and to predict the ethnic sensitivity in clearance, given pharmacokinetic data in just one ethnicity. Subsequently, a popPK model was built using NONMEM(®) to assess the effect of ethnicity on clearance, using human data from multiple ethnic groups. A comparison was made to confirm the PBPK-based ethnic sensitivity prediction, using the results of the popPK analysis. PBPK modelling predicted that the bitopertin geometric mean clearance values after 20 mg oral administration in Caucasians would be 1.32-fold and 1.27-fold higher than the values in Chinese and Japanese, respectively. The ratios of typical clearance in Caucasians to the values in Chinese and Japanese estimated by popPK analysis were 1.20 and 1.17, respectively. The popPK analysis results were similar to the PBPK modelling results. As a general framework, we propose that PBPK modelling should be considered to predict ethnic sensitivity of pharmacokinetics prior to any human data and/or with data in only one ethnicity. In some cases, this will be sufficient to guide initial dose selection in different ethnicities. After clinical trials in different ethnicities, popPK analysis can be used to confirm ethnic differences and to support dose justification and labelling. PBPK modelling prediction and popPK analysis confirmation can complement each other to assess ethnic differences in pharmacokinetics at different drug development stages.

Measuring the Association Between Body Mass Index and All-Cause Mortality in the Presence of Missing Data: Analyses From the Scottish National Diabetes Register.

PubMed

Read, Stephanie H; Lewis, Steff C; Halbesma, Nynke; Wild, Sarah H

2017-04-15

Incorrectly handling missing data can lead to imprecise and biased estimates. We describe the effect of applying different approaches to handling missing data in an analysis of the association between body mass index and all-cause mortality among people with type 2 diabetes. We used data from the Scottish diabetes register that were linked to hospital admissions data and death registrations. The analysis was based on people diagnosed with type 2 diabetes between 2004 and 2011, with follow-up until May 31, 2014. The association between body mass index and mortality was investigated using Cox proportional hazards models. Findings were compared using 4 different missing-data methods: complete-case analysis, 2 multiple-imputation models, and nearest-neighbor imputation. There were 124,451 cases of type 2 diabetes, among which there were 17,085 deaths during 787,275 person-years of follow-up. Patients with missing data (24.8%) had higher mortality than those without missing data (adjusted hazard ratio = 1.36, 95% confidence interval: 1.31, 1.41). A U-shaped relationship between body mass index and mortality was observed, with the lowest hazard ratios occurring among moderately obese people, regardless of the chosen approach for handling missing data. Missing data may affect absolute and relative risk estimates differently and should be considered in analyses of routinely collected data. © The Author 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Improving adherence to healthy dietary patterns, genetic risk, and long term weight gain: gene-diet interaction analysis in two prospective cohort studies

PubMed Central

Wang, Tiange; Heianza, Yoriko; Sun, Dianjianyi; Huang, Tao; Ma, Wenjie; Rimm, Eric B; Manson, JoAnn E; Hu, Frank B; Willett, Walter C

2018-01-01

Abstract Objective To investigate whether improving adherence to healthy dietary patterns interacts with the genetic predisposition to obesity in relation to long term changes in body mass index and body weight. Design Prospective cohort study. Setting Health professionals in the United States. Participants 8828 women from the Nurses’ Health Study and 5218 men from the Health Professionals Follow-up Study. Exposure Genetic predisposition score was calculated on the basis of 77 variants associated with body mass index. Dietary patterns were assessed by the Alternate Healthy Eating Index 2010 (AHEI-2010), Dietary Approach to Stop Hypertension (DASH), and Alternate Mediterranean Diet (AMED). Main outcome measures Five repeated measurements of four year changes in body mass index and body weight over follow-up (1986 to 2006). Results During a 20 year follow-up, genetic association with change in body mass index was significantly attenuated with increasing adherence to the AHEI-2010 in the Nurses’ Health Study (P=0.001 for interaction) and Health Professionals Follow-up Study (P=0.005 for interaction). In the combined cohorts, four year changes in body mass index per 10 risk allele increment were 0.07 (SE 0.02) among participants with decreased AHEI-2010 score and −0.01 (0.02) among those with increased AHEI-2010 score, corresponding to 0.16 (0.05) kg versus −0.02 (0.05) kg weight change every four years (P<0.001 for interaction). Viewed differently, changes in body mass index per 1 SD increment of AHEI-2010 score were −0.12 (0.01), −0.14 (0.01), and −0.18 (0.01) (weight change: −0.35 (0.03), −0.36 (0.04), and −0.50 (0.04) kg) among participants with low, intermediate, and high genetic risk, respectively. Similar interaction was also found for DASH but not for AMED. Conclusions These data indicate that improving adherence to healthy dietary patterns could attenuate the genetic association with weight gain. Moreover, the beneficial effect of improved diet quality on weight management was particularly pronounced in people at high genetic risk for obesity. PMID:29321156

[Research on fast detecting tomato seedlings nitrogen content based on NIR characteristic spectrum selection].

PubMed

Wu, Jing-zhu; Wang, Feng-zhu; Wang, Li-li; Zhang, Xiao-chao; Mao, Wen-hua

2015-01-01

In order to improve the accuracy and robustness of detecting tomato seedlings nitrogen content based on near-infrared spectroscopy (NIR), 4 kinds of characteristic spectrum selecting methods were studied in the present paper, i. e. competitive adaptive reweighted sampling (CARS), Monte Carlo uninformative variables elimination (MCUVE), backward interval partial least squares (BiPLS) and synergy interval partial least squares (SiPLS). There were totally 60 tomato seedlings cultivated at 10 different nitrogen-treatment levels (urea concentration from 0 to 120 mg . L-1), with 6 samples at each nitrogen-treatment level. They are in different degrees of over nitrogen, moderate nitrogen, lack of nitrogen and no nitrogen status. Each sample leaves were collected to scan near-infrared spectroscopy from 12 500 to 3 600 cm-1. The quantitative models based on the above 4 methods were established. According to the experimental result, the calibration model based on CARS and MCUVE selecting methods show better performance than those based on BiPLS and SiPLS selecting methods, but their prediction ability is much lower than that of the latter. Among them, the model built by BiPLS has the best prediction performance. The correlation coefficient (r), root mean square error of prediction (RMSEP) and ratio of performance to standard derivate (RPD) is 0. 952 7, 0. 118 3 and 3. 291, respectively. Therefore, NIR technology combined with characteristic spectrum selecting methods can improve the model performance. But the characteristic spectrum selecting methods are not universal. For the built model based or single wavelength variables selection is more sensitive, it is more suitable for the uniform object. While the anti-interference ability of the model built based on wavelength interval selection is much stronger, it is more suitable for the uneven and poor reproducibility object. Therefore, the characteristic spectrum selection will only play a better role in building model, combined with the consideration of sample state and the model indexes.

167. ARAIII Plot plan as of 1986. Shows most of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

167. ARA-III Plot plan as of 1986. Shows most of original army buildings in addition to location for buildings ARA-621 and ARA-630, which were built in 1969 after army program had been canceled. Date: March 1986. Ineel index code no. 063-0100-00-220-421241. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

Real world treatment patterns in chronic myeloid leukemia patients newly initiated on tyrosine kinase inhibitors in an U.S. integrated healthcare system.

PubMed

Rashid, Nazia; Koh, Han A; Lin, Kathy J; Stwalley, Brian; Felber, Eugene

2018-06-01

Purpose To evaluate treatment patterns in patients diagnosed with incident chronic myelogenous leukemia (CML) newly initiating therapy with imatinib, dasatinib, or nilotinib. Patients were followed to determine switching and discontinuation rates. Factors associated with switching or discontinuation from index TKI therapy, reasons for discontinuation based on electronic chart notes, and frequency of laboratory monitoring were assessed during the follow-up period. Methods A retrospective cohort study was conducted in chronic myelogenous leukemia patients aged ≥ 18 years who were identified from the Kaiser Permanente Southern California (KPSC) Cancer Registry database during the study time period of 1 January 2007 to 12 December 2013. The index date was defined as the date of the first TKI prescription (imatinib, dasatinib, or nilotinib) identified during the study time period with no prior history of TKI use within 12 months. Patients had to have continuous membership with drug benefit eligibility and no prior history of stem cell transplant (SCT) or other cancers during the 12 months prior to the index date. Baseline characteristics were identified during 12 months prior to the index date and outcomes were identified during the follow-up period after the index date. All patients were followed from index TKI therapy until end of study time period (12 December 2014), death, stem cell transplant, or disenrollment from the health plan unless one of the following occurred first: a patient switched their index therapy, or a patient discontinued their index therapy. Forward stepwise selection multivariable logistic regression models were used to evaluate factors associated with patients who continued therapy compared to those who switched or discontinued therapy with the index TKI. Chart notes were reviewed 30 days prior and 30 days post index TKI discontinuation to evaluate reasons for discontinuation. Molecular and cytogenetic testing frequency was also assessed during the follow-up period among the different patient groups. Results Two hundred sixteen patients were identified with incident chronic myelogenous leukemia and use of TKI therapy: 189 (87.5%) received imatinib, 19 (8.8%) received dasatinib, and 8 (3.7%) received nilotinib. The mean age on index date was 53 years and 63% were male; 103 patients (48%) continued on their index therapy, while 62 patients (28%) switched, and 51 patients (24%) discontinued.

A data discovery index for the social sciences

PubMed Central

Krämer, Thomas; Klas, Claus-Peter; Hausstein, Brigitte

2018-01-01

This paper describes a novel search index for social and economic research data, one that enables users to search up-to-date references for data holdings in these disciplines. The index can be used for comparative analysis of publication of datasets in different areas of social science. The core of the index is the da|ra registration agency’s database for social and economic data, which contains high-quality searchable metadata from registered data publishers. Research data’s metadata records are harvested from data providers around the world and included in the index. In this paper, we describe the currently available indices on social science datasets and their shortcomings. Next, we describe the motivation behind and the purpose for the data discovery index as a dedicated and curated platform for finding social science research data and gesisDataSearch, its user interface. Further, we explain the harvesting, filtering and indexing procedure and give usage instructions for the dataset index. Lastly, we show that the index is currently the most comprehensive and most accessible collection of social science data descriptions available. PMID:29633988

Implementation of the common phrase index method on the phrase query for information retrieval

NASA Astrophysics Data System (ADS)

Fatmawati, Triyah; Zaman, Badrus; Werdiningsih, Indah

2017-08-01

As the development of technology, the process of finding information on the news text is easy, because the text of the news is not only distributed in print media, such as newspapers, but also in electronic media that can be accessed using the search engine. In the process of finding relevant documents on the search engine, a phrase often used as a query. The number of words that make up the phrase query and their position obviously affect the relevance of the document produced. As a result, the accuracy of the information obtained will be affected. Based on the outlined problem, the purpose of this research was to analyze the implementation of the common phrase index method on information retrieval. This research will be conducted in English news text and implemented on a prototype to determine the relevance level of the documents produced. The system is built with the stages of pre-processing, indexing, term weighting calculation, and cosine similarity calculation. Then the system will display the document search results in a sequence, based on the cosine similarity. Furthermore, system testing will be conducted using 100 documents and 20 queries. That result is then used for the evaluation stage. First, determine the relevant documents using kappa statistic calculation. Second, determine the system success rate using precision, recall, and F-measure calculation. In this research, the result of kappa statistic calculation was 0.71, so that the relevant documents are eligible for the system evaluation. Then the calculation of precision, recall, and F-measure produces precision of 0.37, recall of 0.50, and F-measure of 0.43. From this result can be said that the success rate of the system to produce relevant documents is low.

Steps to Health employee weight management randomized control trial: short-term follow-up results.

PubMed

Østbye, Truls; Stroo, Marissa; Brouwer, Rebecca J N; Peterson, Bercedis L; Eisenstein, Eric L; Fuemmeler, Bernard F; Joyner, Julie; Gulley, Libby; Dement, John M

2015-02-01

To present the short-term follow-up findings of the Steps to Health study, a randomized trial to evaluate the effectiveness of two employee weight management programs offered within Duke University and the Health System. A total of 550 obese (body mass index, ≥30 kg/m2) employees were randomized 1:1 between January 2011 and June 2012 to the education-based Weight Management (WM) or the WM+ arm, which focused on behavior modification. Employees were contacted to complete a follow-up visit approximately 14 months after baseline. There were no clinically, or statistically, meaningful differences between arms, but there were modest reductions in body mass index, and positive, meaningful changes in diet and physical activity for both arms. The modest positive effects observed in this study may suggest that to achieve weight loss through the workplace more intensive interventions may be required.

MeSH indexing based on automatically generated summaries.

PubMed

Jimeno-Yepes, Antonio J; Plaza, Laura; Mork, James G; Aronson, Alan R; Díaz, Alberto

2013-06-26

MEDLINE citations are manually indexed at the U.S. National Library of Medicine (NLM) using as reference the Medical Subject Headings (MeSH) controlled vocabulary. For this task, the human indexers read the full text of the article. Due to the growth of MEDLINE, the NLM Indexing Initiative explores indexing methodologies that can support the task of the indexers. Medical Text Indexer (MTI) is a tool developed by the NLM Indexing Initiative to provide MeSH indexing recommendations to indexers. Currently, the input to MTI is MEDLINE citations, title and abstract only. Previous work has shown that using full text as input to MTI increases recall, but decreases precision sharply. We propose using summaries generated automatically from the full text for the input to MTI to use in the task of suggesting MeSH headings to indexers. Summaries distill the most salient information from the full text, which might increase the coverage of automatic indexing approaches based on MEDLINE. We hypothesize that if the results were good enough, manual indexers could possibly use automatic summaries instead of the full texts, along with the recommendations of MTI, to speed up the process while maintaining high quality of indexing results. We have generated summaries of different lengths using two different summarizers, and evaluated the MTI indexing on the summaries using different algorithms: MTI, individual MTI components, and machine learning. The results are compared to those of full text articles and MEDLINE citations. Our results show that automatically generated summaries achieve similar recall but higher precision compared to full text articles. Compared to MEDLINE citations, summaries achieve higher recall but lower precision. Our results show that automatic summaries produce better indexing than full text articles. Summaries produce similar recall to full text but much better precision, which seems to indicate that automatic summaries can efficiently capture the most important contents within the original articles. The combination of MEDLINE citations and automatically generated summaries could improve the recommendations suggested by MTI. On the other hand, indexing performance might be dependent on the MeSH heading being indexed. Summarization techniques could thus be considered as a feature selection algorithm that might have to be tuned individually for each MeSH heading.

Cenozoic Uplift and Climate Change of the Northeast Tibetan Plateau: Evidence from Leaf Wax Stable Isotopic Records

NASA Astrophysics Data System (ADS)

Hou, M.; Zhuang, G.; Wu, M.

2017-12-01

Topics about the deformation history and uplift mechanism of Tibetan Plateau have been largely debated in the past few decades. Different geodynamic models present different predictions on the mountain building processes and hence the surface uplift history. For example, one tectonic model suggests a rapid uplift (>1.0 to 2.0 km) of the Tibetan Plateau in the period of ca. 10 to 8 Ma as result of isostatic rebound due to the removal of over-thickened mental lithosphere beneath. Whilst the stepwise uplift model infers that the high topography was growing progressively from south to north with the Northeast Tibetan Plateau being built in the Pliocene to present. In this case, the timing of Cenozoic uplift of Northeast Tibetan Plateau would provide information for distinguishing competing geodynamic processes. The stable isotope based paleoaltimetry holds the key to answering when the high topography was built. Additionally, the evolution of Cenozoic Asian climate was argued to be closely related to the high topography built up on the Tibetan Plateau since the India-Asian collision and/or impacted by the global change. To understand when the high topography was built and how the growth of Tibetan Plateau impacted the climate, we reconstructed the long-term histories of paleohydrology from hinterland and foreland basins in the Northeast Tibetan Plateau. We applied the compound-specific isotope hydrogen analysis to leaf wax n-alkanes (δ2Hn-alk) that are preserved in well-dated stratigraphic series (ca. 24 Ma to the present) in the Northeast Tibetan Plateau. The newly reconstructed δ2Hn-alk supports the inference of high topography on the Northeast Tibetan Plateau was built during the middle to late Miocene. Our inference is consistent with sedimentary and basement rock studies that show fundamental changes in facies and provenance and exhumation history. The new δ2Hn-alk record also reveals that the regional climate became drier since the middle Miocene following the gain of high elevations on the plateau. Additionally, the late Cenozoic global cooling might impact the regional climate by influencing the precipitable moisture content.

Mapping the functional assessment of cancer therapy-breast (FACT-B) to the 5-level EuroQoL Group's 5-dimension questionnaire (EQ-5D-5L) utility index in a multi-ethnic Asian population.

PubMed

Cheung, Yin Bun; Luo, Nan; Ng, Raymond; Lee, Chun Fan

2014-12-12

To develop an algorithm for mapping the Functional Assessment of Cancer Therapy-Breast (FACT-B) to the 5-level EuroQoL Group's 5-dimension questionnaire (EQ-5D-5L) utility index. A survey of 238 breast cancer patients in Singapore was conducted. Models using various regression methods with or without recognizing the upper boundary of utility values at 1 were fitted to predict the EQ-5D-5L utility index based on the five subscale scores of the FACT-B. Data from a follow-up survey of these patients were used to validate the results. A model that maps the physical, emotional, functional well-being and the breast cancer concerns subscales of the FACT-B to the EQ-5D-5L utility index was derived. The social well-being subscale was not associated to the utility index. Although theoretical assumptions may not be valid, ordinary least square outperformed other regression methods. The mean predicted utility index within each performance status level at follow-up deviated from the observed mean less than the minimally important difference of EQ-5D for cancer patients. The mapping algorithm converts the FACT-B to the EQ-5D utility index. This enables oncologists, clinical researchers and policy makers to obtain a quantitative utility summary of a patient's health status when only the FACT-B is assessed.

Heat accumulation regime of femtosecond laser writing in fused silica and Nd:phosphate glass

NASA Astrophysics Data System (ADS)

Bukharin, M. A.; Khudyakov, D. V.; Vartapetov, S. K.

2015-04-01

We investigated refractive index induced by direct femtosecond laser writing inside fused silica and Nd:phosphate glass in heat accumulation regime. Spatial profile and magnitude of induced refractive index were investigated at various pulse repetition rates and translation velocities. It was shown that the magnitude of induced refractive index significantly rises with decreasing in time interval between successive laser pulses below the time for thermal diffusion. Going from nonthermal regime to heat accumulation regime, we achieved induced refractive index growth from 4 × 10-3 up to 6.5 × 10-3 in fused silica and from -6 × 10-3 to -9 × 10-3 in Nd:phosphate glass. Aspect ratio of treated area decreased from 2.1 down to less than 1.5 without correcting optical elements. It was shown that in heat accumulation regime, the treated area was surrounded by region of alternatively changed refractive index with significant magnitude up to -2 × 10-3. Wide regions of decreased refractive index enable fabrication of depressed cladding waveguides. We demonstrated low-loss (0.3 dB/cm) tubular waveguide inside fused silica. For orthogonal polarizations of guiding light, we achieved a small difference between losses as 0.1 dB/cm using highly symmetric written tracks forming the cladding. The desired structure was simulated with the beam propagation method, and the results were in good agreement with experiment data.

Control Scheme of River-lake System from the View of Ecological Sponge Basin aiming at Sponge City Construction

NASA Astrophysics Data System (ADS)

Ding, X.; Liu, J.; Yang, Z.

2017-12-01

China is in the rapid advance of urbanization, and is promoting the Sponge City Construction (SCC) with the characteristics of natural accumulation, natural infiltration and natural purification. The Chinese government selected 16 and 14 cities as pilot cities in 2015 and 2016 respectively to carry out SCC taking Low Impact Development (LID) as the concept. However, in 2015 and 2016, water-logging occurred in 10 cities and 9 cities respectively during the pilot cities. Therefore, relying solely on LID can not solve the problem of urban flood and waterlogging. Except for a series of LID measures during the process of SCC, corresponding control scheme of river-lake system should be established to realize water-related targets. From the view of ecological sponge basin, this study presents the general idea of SCC both in and out of the unban built-up area and the corresponding control scheme of river-lake system: for the regions outside the built-up area, the main aim of SCC is to carry out the top-level design of urban flood control and waterlogging, establish the water security system outside the city for solving the problems including flood control, water resources, water environment and water ecology; for the built-up area, the main aim of SCC is to construct different kinds of urban sponge according to local conditions and develop multi-scale drainage system responding to different intensities of rainfall taking the river-lake system as the core. Taking Fenghuang County of Hunan Province as an example for the application research, the results indicate that, after the implementation of the control scheme of river-lake system: 1) together with other SCC measures including LID, the control rate of total annual runoff in Fenghuang County is expected to be 82.9% which meets the target requirement of 80%; 2) flood control and drainage standards in Fenghuang County can be increased from the current 10-year return to 20-year return; 3) urban and rural water supply guarantee rate is expected to be 98% which meets the target requirement of 95%. Therefore, the control scheme of urban river-lake system in the county is technically feasible, and can effectively solve the problems including flood control, water resources shortage and ecological water demand in the county, thus may provide strong support and guarantee for SCC.

Walkability of local communities: using geographic information systems to objectively assess relevant environmental attributes.

PubMed

Leslie, Eva; Coffee, Neil; Frank, Lawrence; Owen, Neville; Bauman, Adrian; Hugo, Graeme

2007-03-01

Geographic Information Systems (GIS) can be used to objectively measure features of the built environment that may influence adults' physical activity, which is an important determinant of chronic disease. We describe how a previously developed index of walkability was operationalised in an Australian context, using available spatial data. The index was used to generate a stratified sampling frame for the selection of households from 32 communities for the PLACE (Physical Activity in Localities and Community Environments) study. GIS data have the potential to be used to construct measures of environmental attributes and to develop indices of walkability for cities, regions or local communities.

Operational adaptability evaluation index system of pumped storage in UHV receiving-end grids

NASA Astrophysics Data System (ADS)

Yuan, Bo; Zong, Jin; Feng, Junshu

2017-01-01

Pumped storage is an effective solution to deal with the emergency reserve shortage, renewable energy accommodating and peak-shaving problems in ultra-high voltage (UHV) transmission receiving-end grids. However, governments and public opinion in China tend to evaluate the operational effectiveness of pumped storage using annual utilization hour, which may result in unreasonable and unnecessary dispatch of pumped storage. This paper built an operational adaptability evaluation index system for pumped storage in UHV-receiving end grids from three aspects: security insurance, peak-shaving and renewable energy accommodating, which can provide a comprehensive and objective way to evaluate the operational performance of a pumped storage station.

Self-Efficacy, Planning, or a Combination of Both? A Longitudinal Experimental Study Comparing Effects of Three Interventions on Adolescents' Body Fat.

PubMed

Luszczynska, Aleksandra; Hagger, Martin S; Banik, Anna; Horodyska, Karolina; Knoll, Nina; Scholz, Urte

2016-01-01

The superiority of an intervention combining two sets of theory-based behavior change techniques targeting planning and self-efficacy over an intervention targeting planning only or self-efficacy only has rarely been investigated. We compared the influence of self-efficacy, planning, and self-efficacy+planning interventions with an education-based control condition on adolescents' body fat, assuming mediating effects of respective social cognitive variables and moderate-to-vigorous physical activity (MVPA). The moderating role of the built environment was examined. Participants (N = 1217, aged 14-18 years) were randomly assigned to four conditions: planning (n = 270), self-efficacy (n = 311), self-efficacy+planning (n = 351), and control (n = 285). The measurement was conducted at baseline (T1), two-month follow-up (T2), and fourteen-month follow-up (T3). Interventions/control group procedures were delivered at T1 and T2. Percent of body fat tissue (measured at T1 and T3) was the main outcome. Social cognitive mediators (self-efficacy and planning) were assessed at T1 and T2. The behavioral mediator (MVPA) and the presence of built MVPA facilities (the moderator) were evaluated at T1 and T3. Similar small increases of body fat were found across the three intervention groups, but the increment of body fat was significantly larger in the control group. On average, differences between control and intervention groups translated to approximately 1% of body fat. Effects of the interventions on body fat were mediated by relevant social cognitive variables and MVPA. A lower increase of body fat was found among intervention group participants who had access to newly-built MVPA facilities. We found no superiority of an intervention targeting two social cognitive variables over the intervention targeting one cognition only.

Plant selection for nest building by western lowland gorillas in Cameroon.

PubMed

Willie, Jacob; Tagg, Nikki; Petre, Charles-Albert; Pereboom, Zjef; Lens, Luc

2014-01-01

We examined 834 nests built by western lowland gorillas in Cameroon between July 2008 and July 2011 to identify the plant species used in their construction. Preference for each plant species for nesting was assessed using a 'preference index' calculated by combining information on the occurrence of each species in the forest and in the nests. Forty-six plant species representing about 15 % of the total number of species in the forest and 26 % of species used for nest building were frequently used by gorillas. Preference levels significantly varied among these species. Nests were mostly built with herbs of the families Marantaceae and Zingiberaceae and woody species such as Manniophyton fulvum (liana) and Alchornea floribunda (shrub). As observed in other gorilla populations, suitability for nest building and availability of gorilla food in stems were the likely determinants of plant selection. The total number of species used per nest ranged from 1 to 11, with an average of 4.9. This is high compared to other sites, emphasizing variability in the availability of nest building materials and habitat differences across the range of the western gorilla. Seasonal changes in the use of different habitat types for nesting did not appear to influence plant use for nest building as there was little variation in plant selection across seasons or the composition of nests. Our findings suggest that gorillas non-randomly select plant species to build nests, and use a particular set of species combined at varying proportions, with no clear seasonal or spatial patterns.

Locomotive cab design development. volume 2 : operator's manual - Interim Report

DOT National Transportation Integrated Search

1976-10-01

Locomotive Cab 913 designed as a result of Contract DOT-TSC- 913 has been built as a hard mock-up. This Operator's Manual is to familiarize the user with the mock-up. Normal and emergency procedures and cab facilities are described.

Method for selection of optimal road safety composite index with examples from DEA and TOPSIS method.

PubMed

Rosić, Miroslav; Pešić, Dalibor; Kukić, Dragoslav; Antić, Boris; Božović, Milan

2017-01-01

Concept of composite road safety index is a popular and relatively new concept among road safety experts around the world. As there is a constant need for comparison among different units (countries, municipalities, roads, etc.) there is need to choose an adequate method which will make comparison fair to all compared units. Usually comparisons using one specific indicator (parameter which describes safety or unsafety) can end up with totally different ranking of compared units which is quite complicated for decision maker to determine "real best performers". Need for composite road safety index is becoming dominant since road safety presents a complex system where more and more indicators are constantly being developed to describe it. Among wide variety of models and developed composite indexes, a decision maker can come to even bigger dilemma than choosing one adequate risk measure. As DEA and TOPSIS are well-known mathematical models and have recently been increasingly used for risk evaluation in road safety, we used efficiencies (composite indexes) obtained by different models, based on DEA and TOPSIS, to present PROMETHEE-RS model for selection of optimal method for composite index. Method for selection of optimal composite index is based on three parameters (average correlation, average rank variation and average cluster variation) inserted into a PROMETHEE MCDM method in order to choose the optimal one. The model is tested by comparing 27 police departments in Serbia. Copyright © 2016 Elsevier Ltd. All rights reserved.

Kidney function and cognitive decline in an oldest-old Chinese population.

PubMed

Bai, Kunhao; Pan, Yujing; Lu, Fanghong; Zhao, Yingxin; Wang, Jinwei; Zhang, Luxia

2017-01-01

Early-stage chronic kidney disease has been suggested to be correlated with cognitive decline, but the association has rarely been explored in the oldest old. This prospective study included 284 Chinese participants aged 80 years or older with serum creatinine levels <150 µmol/L. The median follow-up time was 3.3 years, and 247 (87.0%) participants provided valid data at their last visit. Kidney function was evaluated by measuring the estimated glomerular filtration rate (eGFR) at baseline, and cognitive function was evaluated using the Mini-Mental State Examination (MMSE) at both baseline and annual visits. A reliable decrease in the MMSE score over the follow-up period was observed based on a Reliable Change Index of 1.645 (equivalent to a 90% confidence interval [CI]), which was used to define cognitive decline. Poisson regression models were built to analyze the association between baseline kidney function and cognitive decline. A total of 18 (7.3%) cases of incident cognitive decline were observed during the follow-up period. After adjusting for potential confounders, the relative risk of developing cognitive decline was 4.03 (95% CI 1.09-13.81) among participants with an eGFR of 30-59 mL/min/1.73 m 2 compared to participants with an eGFR of ≥60 mL/min/1.73 m 2 . Early-stage chronic kidney disease was correlated with cognitive decline in an oldest-old Chinese population.

Flux and turbulence measurements at a densely built-up site in Marseille: Heat, mass (water and carbon dioxide), and momentum

NASA Astrophysics Data System (ADS)

Grimmond, C. S. B.; Salmond, J. A.; Oke, T. R.; Offerle, B.; Lemonsu, A.

2004-12-01

Eddy covariance (EC) observations above the densely built-up center of Marseille during the Expérience sur site pour contraindre les modèles de pollution atmosphérique et de transport d'émissions (ESCOMPTE) summertime measurement campaign extend current understanding of surface atmosphere exchanges in cities. The instrument array presented opportunities to address issues of the representativeness of local-scale fluxes in urban settings. Separate EC systems operated at two levels, and a telescoping tower allowed the pair to be exposed at two different sets of heights. The flux and turbulence observations taken at the four heights, stratified by wind conditions (mistral wind and sea breeze), are used to address the partitioning of the surface energy balance in an area with large roughness elements. The turbulent sensible heat flux dominates in the daytime, although the storage heat flux is a significant term that peaks before solar noon. The turbulent latent heat flux is small but not negligible. Carbon dioxide fluxes show that this central city district is almost always a source, but the vegetation reduces the magnitude of the fluxes in the afternoon. The atmosphere in such a heavily developed area is rarely stable. The turbulence characteristics support the empirical functions proposed by M. Roth.

Coupled analysis on landscape pattern and hydrological processes in Yanhe watershed of China.

PubMed

Li, J; Zhou, Z X

2015-02-01

As a typical experimental Soil and Water Conservation District, Yanhe watershed has long been plagued by soil erosion due to severe human disturbances. Exerting remote sensing (RS) and geographic information system (GIS) technology, this paper firstly analyzed and simulated ecological hydrological process in Yanhe watershed based on SWAT model, constructed a comprehensive landscape indices which was closely related to soil erosion, and reflected the coupling relationship between regional landscape pattern change and soil erosion. The results are as follows: (1) Areas of different land use types remained relatively stable from 1990 to 2000 and then changed drastically from 2000 to 2010, which was characterized by lawn expansion and cultivated land shrinkage. (2) In terms of the spatial heterogeneity of hydrological response unit (HRUs), the correlation coefficient of seven selected landscape indices and runoff was very small, and cannot pass all significant testing. But correlation between the indices and sediment yield except for Total Core Area (TCA) and Interspersion and Juxtaposition Index (IJI) was remarkable. (3) According to 'the source-sink' theory of soil erosion, new landscape index-slope-HRU landscape index (SHLI) was built, and reflected the relationship between landscape pattern and soil erosion processes to a certain extent. (4) Coupling relationship between SHLI in 2010 and annual sediment was very prominent. In the sub-basin scale, SHLI has obvious regional differentiation from annual sediment. Copyright © 2014 Elsevier B.V. All rights reserved.

Randomized controlled study of customized preventive medicine reminder letters in a community practice.

PubMed Central

Hogg, W. E.; Bass, M.; Calonge, N.; Crouch, H.; Satenstein, G.

1998-01-01

OBJECTIVE: To test the effectiveness of customized, family-oriented reminder letters in activating patients to seek appropriate preventive services. DESIGN: Randomized clinical trial. One group received computer-generated, customized letters explaining recommended preventive procedures for each family member. A second group received a form letter listing recommendations for all preventive procedures for all age and sex groups. A third group (control group) received no letters. SETTING: A private medical centre, without university affiliation, in rural Quebec. PARTICIPANTS: From 8770 patients who met study criteria, 719 families were randomly selected. Data were available for 1971 of 1998 patients in these families. MAIN OUTCOME MEASURES: The Family Received Index is the proportion of all procedures for which a family was overdue that they received. The Family End-of-study Up-to-date Index is the proportion of procedures for which the family was eligible and for which they were up-to-date at the end of the study. RESULTS: The Family Received Index for families mailed customized letters was more than double the index for patients not mailed letters (Kruskal-Wallis P = .0139). Comparison of the Family End-of-study Up-to-date indices also demonstrated that families of patients sent customized letters were more likely to be up-to-date than families not sent letters (Kruskal-Wallis P = .0054). No statistically significant difference appeared between the number of preventive measures received by the control group and the form-letter group. CONCLUSIONS: This study demonstrates a clinically small but statistically significant value to customizing reminder letters. PMID:9481466

Time's Up, Turkey--Pop-Up Thermometers

ERIC Educational Resources Information Center

Moyer, Richard; Everett, Susan

2009-01-01

Meat thermometers can be awkward to use in terms of placement and avoidance of bones. Because of these problems, each year 30 million Thanksgiving turkeys have a built-in thermometer that pops up when the turkey is properly cooked. Turkey timers are an example of how engineering solved a common, everyday problem. The following 5E learning cycle…

Multi-Feature Based Information Extraction of Urban Green Space Along Road

NASA Astrophysics Data System (ADS)

Zhao, H. H.; Guan, H. Y.

2018-04-01

Green space along road of QuickBird image was studied in this paper based on multi-feature-marks in frequency domain. The magnitude spectrum of green along road was analysed, and the recognition marks of the tonal feature, contour feature and the road were built up by the distribution of frequency channels. Gabor filters in frequency domain were used to detect the features based on the recognition marks built up. The detected features were combined as the multi-feature-marks, and watershed based image segmentation were conducted to complete the extraction of green space along roads. The segmentation results were evaluated by Fmeasure with P = 0.7605, R = 0.7639, F = 0.7622.

Multilevel built environment features and individual odds of overweight and obesity in Utah

PubMed Central

Xu, Yanqing; Wen, Ming; Wang, Fahui

2015-01-01

Based on the data from the Behavioral Risk Factor Surveillance System (BRFSS) in 2007, 2009 and 2011 in Utah, this research uses multilevel modeling (MLM) to examine the associations between neighborhood built environments and individual odds of overweight and obesity after controlling for individual risk factors. The BRFSS data include information on 21,961 individuals geocoded to zip code areas. Individual variables include BMI (body mass index) and socio-demographic attributes such as age, gender, race, marital status, education attainment, employment status, and whether an individual smokes. Neighborhood built environment factors measured at both zip code and county levels include street connectivity, walk score, distance to parks, and food environment. Two additional neighborhood variables, namely the poverty rate and urbanicity, are also included as control variables. MLM results show that at the zip code level, poverty rate and distance to parks are significant and negative covariates of the odds of overweight and obesity; and at the county level, food environment is the sole significant factor with stronger fast food presence linked to higher odds of overweight and obesity. These findings suggest that obesity risk factors lie in multiple neighborhood levels and built environment features need to be defined at a neighborhood size relevant to residents' activity space. PMID:26251559

EMMA: a new paradigm in configurable software

DOE PAGES

Nogiec, J. M.; Trombly-Freytag, K.

2017-11-23

EMMA is a framework designed to create a family of configurable software systems, with emphasis on extensibility and flexibility. It is based on a loosely coupled, event driven architecture. The EMMA framework has been built upon the premise of composing software systems from independent components. It opens up opportunities for reuse of components and their functionality and composing them together in many different ways. As a result, it provides the developer of test and measurement applications with a lightweight alternative to microservices, while sharing their various advantages, including composability, loose coupling, encapsulation, and reuse.

The Present Status of Airship Construction, Especially of Airship-framing Construction

NASA Technical Reports Server (NTRS)

Ebner, Hans

1938-01-01

This work proposes to sketch, in broad outline, the status of airship construction in the various countries, at a time when commerce over great distances might be finally opened up to the airship through the performances of the "Graf Zeppelin." After a short historical review, a survey of the most important rigid and semirigid airships built since 1925, their differences and special problems, is made. In more detailed treatment, the framing construction of the more recent rigid airships and some especially interesting structural questions are investigated.

AMS data production facilities at science operations center at CERN

NASA Astrophysics Data System (ADS)

Choutko, V.; Egorov, A.; Eline, A.; Shan, B.

2017-10-01

The Alpha Magnetic Spectrometer (AMS) is a high energy physics experiment on the board of the International Space Station (ISS). This paper presents the hardware and software facilities of Science Operation Center (SOC) at CERN. Data Production is built around production server - a scalable distributed service which links together a set of different programming modules for science data transformation and reconstruction. The server has the capacity to manage 1000 paralleled job producers, i.e. up to 32K logical processors. Monitoring and management tool with Production GUI is also described.

EMMA: A New Paradigm in Configurable Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nogiec, J. M.; Trombly-Freytag, K.

EMMA is a framework designed to create a family of configurable software systems, with emphasis on extensibility and flexibility. It is based on a loosely coupled, event driven architecture. The EMMA framework has been built upon the premise of composing software systems from independent components. It opens up opportunities for reuse of components and their functionality and composing them together in many different ways. It provides the developer of test and measurement applications with a lightweight alternative to microservices, while sharing their various advantages, including composability, loose coupling, encapsulation, and reuse.

EMMA: a new paradigm in configurable software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nogiec, J. M.; Trombly-Freytag, K.

EMMA is a framework designed to create a family of configurable software systems, with emphasis on extensibility and flexibility. It is based on a loosely coupled, event driven architecture. The EMMA framework has been built upon the premise of composing software systems from independent components. It opens up opportunities for reuse of components and their functionality and composing them together in many different ways. As a result, it provides the developer of test and measurement applications with a lightweight alternative to microservices, while sharing their various advantages, including composability, loose coupling, encapsulation, and reuse.

Development of a scanning transmission x-ray microscope for the beamline P04 at PETRA III DESY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrianov, Konstantin; Ewald, Johannes; Nisius, Thomas

We present a scanning transmission x-ray microscope (STXM) built on top of our existing modular platform for high resolution imaging experiments. This platform consists of up to three separate vacuum chambers and custom designed piezo stages. These piezo stages are able to move precisely in x-, y- and z-direction, this makes it possible to adjust the components for different imaging modes. During recent experiments the endstation was operated mainly as a transmission x-ray microscope (TXM) [1, 2].