Wastewater Biosolid Composting Optimization Based on UV-VNIR Spectroscopy Monitoring

PubMed Central

Temporal-Lara, Beatriz; Melendez-Pastor, Ignacio; Gómez, Ignacio; Navarro-Pedreño, Jose

2016-01-01

Conventional wastewater treatment generates large amounts of organic matter–rich sludge that requires adequate treatment to avoid public health and environmental problems. The mixture of wastewater sludge and some bulking agents produces a biosolid to be composted at adequate composting facilities. The composting process is chemically and microbiologically complex and requires an adequate aeration of the biosolid (e.g., with a turner machine) for proper maturation of the compost. Adequate (near) real-time monitoring of the compost maturity process is highly difficult and the operation of composting facilities is not as automatized as other industrial processes. Spectroscopic analysis of compost samples has been successfully employed for compost maturity assessment but the preparation of the solid compost samples is difficult and time-consuming. This manuscript presents a methodology based on a combination of a less time-consuming compost sample preparation and ultraviolet, visible and short-wave near-infrared spectroscopy. Spectroscopic measurements were performed with liquid compost extract instead of solid compost samples. Partial least square (PLS) models were developed to quantify chemical fractions commonly employed for compost maturity assessment. Effective regression models were obtained for total organic matter (residual predictive deviation—RPD = 2.68), humification ratio (RPD = 2.23), total exchangeable carbon (RPD = 2.07) and total organic carbon (RPD = 1.66) with a modular and cost-effective visible and near infrared (VNIR) spectroradiometer. This combination of a less time-consuming compost sample preparation with a versatile sensor system provides an easy-to-implement, efficient and cost-effective protocol for compost maturity assessment and near-real-time monitoring. PMID:27854280

Wastewater Biosolid Composting Optimization Based on UV-VNIR Spectroscopy Monitoring.

PubMed

Temporal-Lara, Beatriz; Melendez-Pastor, Ignacio; Gómez, Ignacio; Navarro-Pedreño, Jose

2016-11-15

Conventional wastewater treatment generates large amounts of organic matter-rich sludge that requires adequate treatment to avoid public health and environmental problems. The mixture of wastewater sludge and some bulking agents produces a biosolid to be composted at adequate composting facilities. The composting process is chemically and microbiologically complex and requires an adequate aeration of the biosolid (e.g., with a turner machine) for proper maturation of the compost. Adequate (near) real-time monitoring of the compost maturity process is highly difficult and the operation of composting facilities is not as automatized as other industrial processes. Spectroscopic analysis of compost samples has been successfully employed for compost maturity assessment but the preparation of the solid compost samples is difficult and time-consuming. This manuscript presents a methodology based on a combination of a less time-consuming compost sample preparation and ultraviolet, visible and short-wave near-infrared spectroscopy. Spectroscopic measurements were performed with liquid compost extract instead of solid compost samples. Partial least square (PLS) models were developed to quantify chemical fractions commonly employed for compost maturity assessment. Effective regression models were obtained for total organic matter (residual predictive deviation-RPD = 2.68), humification ratio (RPD = 2.23), total exchangeable carbon (RPD = 2.07) and total organic carbon (RPD = 1.66) with a modular and cost-effective visible and near infrared (VNIR) spectroradiometer. This combination of a less time-consuming compost sample preparation with a versatile sensor system provides an easy-to-implement, efficient and cost-effective protocol for compost maturity assessment and near-real-time monitoring.

Fungicide residue identification and discrimination using a conducting polymer electronic-nose

Treesearch

Alphus D. Wilson

2013-01-01

The identification of fungicide residues on crop foliage is necessary to make periodic pest management decisions. The determination of fungicide residue identities currently is difficult and time consuming using conventional chemical analysis methods such as gas chromatography-mass spectroscopy. Different fungicide types produce unique electronic aroma signature...

Textile Recycling, Convenience, and the Older Adult.

ERIC Educational Resources Information Center

Domina, Tanya; Koch, Kathryn

2001-01-01

Results of a study to examine the recycling practices and needs of older adults (n=217) indicated that older adults do recycle traditional materials, but need accommodations for physical limitations. They report textile recycling as time consuming and difficult and used donations to religious organizations as their principal means of textile…

A Guide to Intellectual Property Protection, Third Edition.

ERIC Educational Resources Information Center

Minnesota Small Business Assistance Office, St. Paul.

Protecting an idea is often a difficult process. Some ideas and inventions cannot be protected, while others are eligible for only narrow or partial immunity from potential competition and imitation. Obtaining even minimal protection can often be expensive, time consuming, and ultimately result in uncertain or even negative benefits to the…

Group Formation in Mobile Computer Supported Collaborative Learning Contexts: A Systematic Literature Review

ERIC Educational Resources Information Center

Amara, Sofiane; Macedo, Joaquim; Bendella, Fatima; Santos, Alexandre

2016-01-01

Learners are becoming increasingly divers. They may have much personal, social, cultural, psychological, and cognitive diversity. Forming suitable learning groups represents, therefore, a hard and time-consuming task. In Mobile Computer Supported Collaborative Learning (MCSCL) environments, this task is more difficult. Instructors need to consider…

Personalized Assessment as a Means to Mitigate Plagiarism

ERIC Educational Resources Information Center

Manoharan, Sathiamoorthy

2017-01-01

Although every educational institution has a code of academic honesty, they still encounter incidents of plagiarism. These are difficult and time-consuming to detect and deal with. This paper explores the use of personalized assessments with the goal of reducing incidents of plagiarism, proposing a personalized assessment software framework…

P513 A RAPID APPROACH FOR DIAGNOSING CERIODAPHNIA DUBIA REPRODUCTIVE FAILURE

EPA Science Inventory

Sources of failure in C. dubia culture and testing can be difficult to determine without outside assistance. Investigation of these failures can be time consuming. In the current study, USEPA Region 7 laboratory suffered a drop in reproduction in the C. dubia cultures, with wee...

Using a novel flood prediction model and GIS automation to measure the valley and channel morphology of large river networks

EPA Science Inventory

Traditional methods for measuring river valley and channel morphology require intensive ground-based surveys which are often expensive, time consuming, and logistically difficult to implement. The number of surveys required to assess the hydrogeomorphic structure of large river n...

Determining cereal starch amylose content using a dual wavelength iodine binding 96 well plate assay

USDA-ARS?s Scientific Manuscript database

Cereal starch amylose/amylopectin (AM/AP) ratios are critical in functional properties for food and industrial applications. Conventional determination of AM/AP of cereal starches are very time consuming and labor intensive making it very difficult to screen large sample sets. Studying these large...

Computer Controlled Optical Surfacing With Orbital Tool Motion

NASA Astrophysics Data System (ADS)

Jones, Robert A.

1985-11-01

Asymmetric aspheric optical surfaces are very difficult to fabricate using classical techniques and laps the same size as the workpiece. Opticians can produce such surfaces by hand grinding and polishing, using small laps with orbital tool motion. However, this is a time consuming process unsuitable for large optical elements.

Academy Breaks the Isolation of Special Education Directors

ERIC Educational Resources Information Center

WestEd, 2014

2014-01-01

Most special education administrators do not get the chance to network regularly with professional peers to discuss job challenges and strategies. School-district special education directors routinely juggle complex, difficult, time-consuming, and emotion-laden job demands, but when things get tough, they usually find themselves solving problems…

Development of a 96-well plate iodine binding assay for amylose content determination

USDA-ARS?s Scientific Manuscript database

Cereal starch amylose/amylopectin (AM/AP) ratios are critical in functional properties for food and industrial applications. Conventional methods for the determination of AM/AP of cereal starches are very time consuming and labor intensive making it very difficult to screen large sample sets. Stud...

Sea Stories: A Collaborative Tool for Articulating Tactical Knowledge.

ERIC Educational Resources Information Center

Radtke, Paul H.; Frey, Paul R.

Having subject matter experts (SMEs) identify the skills and knowledge to be taught is among the more difficult and time-consuming steps in the training development process. A procedure has been developed for identifying specific tactical decision-making knowledge requirements and translating SME knowledge into appropriate multimedia…

Dynamic generation of a table of contents with consumer-friendly labels.

PubMed

Miller, Trudi; Leroy, Gondy; Wood, Elizabeth

2006-01-01

Consumers increasingly look to the Internet for health information, but available resources are too difficult for the majority to understand. Interactive tables of contents (TOC) can help consumers access health information by providing an easy to understand structure. Using natural language processing and the Unified Medical Language System (UMLS), we have automatically generated TOCs for consumer health information. The TOC are categorized according to consumer-friendly labels for the UMLS semantic types and semantic groups. Categorizing phrases by semantic types is significantly more correct and relevant. Greater correctness and relevance was achieved with documents that are difficult to read than those at an easier reading level. Pruning TOCs to use categories that consumers favor further increases relevancy and correctness while reducing structural complexity.

Validated questionnaires heighten detection of difficult asthma comorbidities.

PubMed

Radhakrishna, Naghmeh; Tay, Tunn Ren; Hore-Lacy, Fiona; Stirling, Robert; Hoy, Ryan; Dabscheck, Eli; Hew, Mark

2017-04-01

Multiple extra-pulmonary comorbidities contribute to difficult asthma, but their diagnosis can be challenging and time consuming. Previous data on comorbidity detection have focused on clinical assessment, which may miss certain conditions. We aimed to locate relevant validated screening questionnaires to identify extra-pulmonary comorbidities that contribute to difficult asthma, and evaluate their performance during a difficult asthma evaluation. MEDLINE was searched to identify key extra-pulmonary comorbidities that contribute to difficult asthma. Screening questionnaires were chosen based on ease of use, presence of a cut-off score, and adequate validation to help systematically identify comorbidities. In a consecutive series of 86 patients referred for systematic evaluation of difficult asthma, questionnaires were administered prior to clinical consultation. Six difficult asthma comorbidities and corresponding screening questionnaires were found: sinonasal disease (allergic rhinitis and chronic rhinosinusitis), vocal cord dysfunction, dysfunctional breathing, obstructive sleep apnea, anxiety and depression, and gastro-oesophageal reflux disease. When the questionnaires were added to the referring clinician's impression, the detection of all six comorbidities was significantly enhanced. The average time for questionnaire administration was approximately 40 minutes. The use of validated screening questionnaires heightens detection of comorbidities in difficult asthma. The availability of data from a battery of questionnaires prior to consultation can save time and allow clinicians to systematically assess difficult asthma patients and to focus on areas of particular concern. Such an approach would ensure that all contributing comorbidities have been addressed before significant treatment escalation is considered.

Integrated Sensitivity Analysis Workflow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friedman-Hill, Ernest J.; Hoffman, Edward L.; Gibson, Marcus J.

2014-08-01

Sensitivity analysis is a crucial element of rigorous engineering analysis, but performing such an analysis on a complex model is difficult and time consuming. The mission of the DART Workbench team at Sandia National Laboratories is to lower the barriers to adoption of advanced analysis tools through software integration. The integrated environment guides the engineer in the use of these integrated tools and greatly reduces the cycle time for engineering analysis.

Robotics in the Construction Industry

DTIC Science & Technology

1990-06-01

accomplished through reprogramming and the attachment of different end effectors. 2.1.2.3 Manipulator I This is the mechanism for moving objects in the...other 3 types of robots), limited repeatability (ability to "hit" the same point in space time after time without reprogramming or adjustment by the... Reprogramming for a different 3 sequence of steps is generally difficult and time- consuming, as the stops must be relocated and I calibrated for the new sequence

An Investigation into the Optimal Number of Distractors in Single-Best Answer Exams

ERIC Educational Resources Information Center

Kilgour, James M.; Tayyaba, Saadia

2016-01-01

In UK medical schools, five-option single-best answer (SBA) questions are the most widely accepted format of summative knowledge assessment. However, writing SBA questions with four effective incorrect options is difficult and time consuming, and consequently, many SBAs contain a high frequency of implausible distractors. Previous research has…

The US EPA CompTox Chemistry Dashboard as a source of data to fill data gaps for chemical sources of risk

EPA Science Inventory

Chemical risk assessment is both time-consuming and difficult because it requires the assembly of data for chemicals generally distributed across multiple sources. The US EPA CompTox Chemistry Dashboard is a publicly accessible web-based application providing access to various da...

The Best of Both Worlds: Exploring Cross-Collaborative Community Engagement

ERIC Educational Resources Information Center

Hunt, Kathleen P.; Krakow, Melinda M.

2015-01-01

Lauded as a rewarding pedagogical approach, community-engagement can be time-consuming, resource-intensive, and difficult for instructors to manage for effective student learning outcomes. Collaborative teaching can allow instructors working in the same classroom to draw from each others' expertise and share resources. In this essay, we propose a…

Supporting the Supporter

ERIC Educational Resources Information Center

Apel, Laura

2008-01-01

Stacy Kane Greenzeig knows that being the parent of a child with special needs is a difficult, time consuming, emotionally draining, and a selfless job. As the mother of a son with disabilities, she has faced the challenges first hand and learned quickly that researching treatments, visiting doctors' offices, and working to help her child in any…

The Three-Ring Circus of Academia: How to Become the Ringmaster

ERIC Educational Resources Information Center

Toews, Michelle L.; Yazedjian, Ani

2007-01-01

The three-ring circus of academia is made up of research, teaching, and service. It is also characterized by continuous action that must be facilitated by the academic ringmaster. Academic life is more difficult than most anticipate because the responsibilities are time-consuming, diverse, and conflicting. Therefore, this article focuses on…

Connecting Earth Systems: Developing Holistic Understanding through the Earth-System-Science Model

ERIC Educational Resources Information Center

Gagnon, Valoree; Bradway, Heather

2012-01-01

For many years, Earth science concepts have been taught as thematic units with lessons in nice, neat chapter packages complete with labs and notes. But compartmentalized Earth science no longer exists, and implementing teaching methods that support student development of holistic understandings can be a time-consuming and difficult task. While…

The Technique of Special-Effects Cinematography.

ERIC Educational Resources Information Center

Fielding, Raymond

The author describes the many techniques used to produce cinematic effects that would be too costly, too difficult, too time-consuming, too dangerous, or simply impossible to achieve with conventional photographic techniques. He points out that these techniques are available not only for 35 millimeter work but also to the 16 mm. photographer who…

Family Health and Financial Literacy--Forging the Connection

ERIC Educational Resources Information Center

Braun, Bonnie; Kim, Jinhee; Anderson, Elaine A.

2009-01-01

Families are at-risk of or experiencing a diminished quality of living and life in current economic times and difficult decisions are required. Health and financial literacy are the basis for wise personal and public decision making. Family and consumer sciences (FCS) professionals can forge connections between health and financial literacy to…

Student Satisfaction with Graduate Supervision in Doctoral Programs Primarily Delivered in Distance Education Settings

ERIC Educational Resources Information Center

Erichsen, Elizabeth Anne; Bolliger, Doris U.; Halupa, Colleen

2014-01-01

There are no universal, precise, or explicit criteria for completing a doctoral degree successfully. Researchers and practitioners have pointed out how difficult and time consuming the supervision of graduate student research can be. When students in doctoral programs complete their degrees via distance delivery, supervision of graduate students…

Vegetative propagation [Chapter 9

Treesearch

Tara Luna

2009-01-01

For the past 30 years, interest in the propagation of native plants has been growing. Many desirable and ecologically important species, however, are difficult or very time consuming to propagate by seeds. Thus, nursery growers may want to investigate how to propagate a species of interest by vegetative propagation. This can be done by combining classic horticultural...

Large-area forest inventory regression modeling: spatial scale considerations

Treesearch

James A. Westfall

2015-01-01

In many forest inventories, statistical models are employed to predict values for attributes that are difficult and/or time-consuming to measure. In some applications, models are applied across a large geographic area, which assumes the relationship between the response variable and predictors is ubiquitously invariable within the area. The extent to which this...

Simulating the fate of fall- and spring-applied poultry litter nitrogen in corn production

USDA-ARS?s Scientific Manuscript database

Monitoring the fate of N derived from manures applied to fertilize crops is difficult, time consuming, and relatively expensive. But computer simulation models can help understand the interactions among various N processes in the soil-plant system and determine the fate of applied N. The RZWQM2 was ...

"PolyCAFe"--Automatic Support for the Polyphonic Analysis of CSCL Chats

ERIC Educational Resources Information Center

Trausan-Matu, Stefan; Dascalu, Mihai; Rebedea, Traian

2014-01-01

Chat conversations and other types of online communication environments are widely used within CSCL educational scenarios. However, there is a lack of theoretical and methodological background for the analysis of collaboration. Manual assessing of non-moderated chat discussions is difficult and time-consuming, having as a consequence that learning…

EFL Students' Perceptions of Corpus-Tools as Writing References

ERIC Educational Resources Information Center

Lai, Shu-Li

2015-01-01

A number of studies have suggested the potentials of corpus tools in vocabulary learning. However, there are still some concerns. Corpus tools might be too complicated to use; example sentences retrieved from corpus tools might be too difficult to understand; processing large number of sample sentences could be challenging and time-consuming;…

Comparison of viable plate count, turbidity measurement and real-time PCR for quantification of Porphyromonas gingivalis.

PubMed

Clais, S; Boulet, G; Van Kerckhoven, M; Lanckacker, E; Delputte, P; Maes, L; Cos, P

2015-01-01

The viable plate count (VPC) is considered as the reference method for bacterial enumeration in periodontal microbiology but shows some important limitations for anaerobic bacteria. As anaerobes such as Porphyromonas gingivalis are difficult to culture, VPC becomes time-consuming and less sensitive. Hence, efficient normalization of experimental data to bacterial cell count requires alternative rapid and reliable quantification methods. This study compared the performance of VPC with that of turbidity measurement and real-time PCR (qPCR) in an experimental context using highly concentrated bacterial suspensions. Our TaqMan-based qPCR assay for P. gingivalis 16S rRNA proved to be sensitive and specific. Turbidity measurements offer a fast method to assess P. gingivalis growth, but suffer from high variability and a limited dynamic range. VPC was very time-consuming and less repeatable than qPCR. Our study concludes that qPCR provides the most rapid and precise approach for P. gingivalis quantification. Although our data were gathered in a specific research context, we believe that our conclusions on the inferior performance of VPC and turbidity measurements in comparison to qPCR can be extended to other research and clinical settings and even to other difficult-to-culture micro-organisms. Various clinical and research settings require fast and reliable quantification of bacterial suspensions. The viable plate count method (VPC) is generally seen as 'the gold standard' for bacterial enumeration. However, VPC-based quantification of anaerobes such as Porphyromonas gingivalis is time-consuming due to their stringent growth requirements and shows poor repeatability. Comparison of VPC, turbidity measurement and TaqMan-based qPCR demonstrated that qPCR possesses important advantages regarding speed, accuracy and repeatability. © 2014 The Society for Applied Microbiology.

Caring for a child with cancer: a longitudinal perspective.

PubMed

Svavarsdottir, Erla Kolbrun

2005-04-01

This paper reports a study to evaluate caregiving demands among mothers and fathers of children with cancer, parents' well-being, and how the parents perceive the health status of their child over a period of 18 months. Cancer among children has psychological impact on all family members. Most previous research has focused on distress, coping patterns and social support, and less is known about how parents are dealing with the illness experience over time. No study was found that evaluated caregiving on a daily basis, or the impact of the cancer on wellbeing and perceptions of health within families. Data were collected between 1999 and 2001. Parents of 26 Icelandic children under 18 years with cancer completed questionnaires about caregiving activities, general wellbeing and health perceptions. Descriptive statistics and Repeated Analyses of Variance were conducted at baseline, 12 and 18 months. The most time-consuming and difficult caregiving activities for both mothers and fathers were giving emotional support to the child with cancer, and to other children in the family. Mothers also found it difficult and time-consuming to manage behavioural problems and to structure and plan activities for the family. Fathers found it difficult to manage work and organize care for the child at the same time, and to give their partner emotional support. When evaluated over time, mothers' caregiving demands differed statistically significantly from fathers', and fathers' caregiving demands and health perceptions changed statistically significantly over the 18 months of the study. These findings underline the long-term impact of children's cancer on their families. Interventions focusing on emotional support, parents' wellbeing, and how families perceive the health of their child with cancer might benefit the family as a whole.

A 3D Geometry Model Search Engine to Support Learning

ERIC Educational Resources Information Center

Tam, Gary K. L.; Lau, Rynson W. H.; Zhao, Jianmin

2009-01-01

Due to the popularity of 3D graphics in animation and games, usage of 3D geometry deformable models increases dramatically. Despite their growing importance, these models are difficult and time consuming to build. A distance learning system for the construction of these models could greatly facilitate students to learn and practice at different…

Improving the Long-Term Care Referral Process: Insights from Patients and Caregivers

ERIC Educational Resources Information Center

Guihan, Marylou; Hedrick, Susan; Miller, Sara; Reder, Sheri

2011-01-01

Large increases in the need for long-term care (LTC) services are expected as baby boomers age. Little has been published about patient and caregiver preferences for information about LTC. However, our qualitative research findings suggest that potential consumers may find it difficult to obtain accurate and timely information about LTC programs…

Cotton yield estimation using very high-resolution digital images acquired on a low-cost small unmanned aerial vehicle

USDA-ARS?s Scientific Manuscript database

Yield estimation is a critical task in crop management. A number of traditional methods are available for crop yield estimation but they are costly, time-consuming and difficult to expand to a relatively large field. Remote sensing provides techniques to develop quick coverage over a field at any sc...

From Assessment to Annual Goal: Engaging a Decision-Making Process in Writing Measurable IEPs

ERIC Educational Resources Information Center

Capizzi, Andrea M.

2008-01-01

Despite federal regulations requiring measurable individualized education programs (IEPs), IEPs are often vague and unfocused, making them difficult to use in guiding instructional planning. Although a well-written IEP can be time consuming and labor intensive, a clearly written IEP, based on documented student needs, can and should be a guidepost…

Stripping Paint From Exterior Wood Surfaces

Treesearch

Mark T. Knaebe

2013-01-01

Removing paint and other film-forming finishes is a time consuming and often difficult process. In some cases, finishes need to be removed prior to repainting; for example, if the old surface is covered with severely peeled or blistered paint or if excessive paint buildup has caused cross-grain cracking. You must also remove the finish before applying a penetrating...

Fifty Plus: Encore Careers Provide Success, Fulfillment in Second Half of Life

ERIC Educational Resources Information Center

Freedman, Marc; Goggin, Judy

2008-01-01

Teaching is a popular pursuit among many second-generation career-seekers. The road from the private sector to the classroom often is littered with time-consuming and difficult requirements--for subject matter mastery, credentialing, and licensure. Too often qualified people check out the rules, consider the challenges, and give up. That wasn't…

Understanding and building wilderness management partnerships with indigenous peoples and communities

Treesearch

Gregory F. Hansen

2011-01-01

Learning about, understanding, and working with native cultures can be rewarding as well as enlightening. Such endeavors can also be time consuming, difficult, and even frustrating in certain instances. However, if coordinated carefully and managed properly, at the end of the day such efforts can ultimately result in innumerable benefits to native communities, land...

Using Multimodal Learning Analytics to Model Student Behaviour: A Systematic Analysis of Behavioural Framing

ERIC Educational Resources Information Center

Andrade, Alejandro; Delandshere, Ginette; Danish, Joshua A.

2016-01-01

One of the challenges many learning scientists face is the laborious task of coding large amounts of video data and consistently identifying social actions, which is time consuming and difficult to accomplish in a systematic and consistent manner. It is easier to catalog observable behaviours (e.g., body motions or gaze) without explicitly…

Development of an Imaging Fourier Transform Spectrometer

DTIC Science & Technology

1986-05-01

during multiple tests or concurrently applying many identical instrument systems to a single test. These difficult, expensive, and time-consuming...processes would introduce AEDC-TR-86-17 uncertainties due to nonstationary sources and instrument instability associated with multiple firings or... multiple instruments. For even moderate spatial, spectral, and temporal resolution, none of the previously mentioned approaches is reasonable. The

Consumer decision making in the individual health insurance market.

PubMed

Marquis, M Susan; Buntin, Melinda Beeuwkes; Escarce, José J; Kapur, Kanika; Louis, Thomas A; Yegian, Jill M

2006-01-01

This paper summarizes the results from a study of consumer decision making in California's individual health insurance market. We conclude that price subsidies will have only modest effects on participation and that efforts to reduce nonprice barriers might be just as effective. We also find that there is substantial pooling in the individual market and that it increases over time because people who become sick can continue coverage without new underwriting. Finally, we show that people prefer more-generous benefits and that it is difficult to induce people in poor health to enroll in high-deductible health plans.

Consumer friendly or reader hostile? An evaluation of the readability of DTC print ads.

PubMed

Sheehan, Kim

2008-01-01

The Food and Drug Administration requires advertisements promoting prescription drugs to be written in "consumer friendly" language. The purpose of this study is to examine the language of Direct-to-Consumer prescription drug advertisements to determine if such language is easy for consumers to read and understand. A series of advertisements for a variety of products, appearing in popular consumer magazines, were analyzed using the Flesch and Gunning-Fogg formulas to determine if DTC advertisements are more or less complex than other advertisements that consumers read today. Results indicate that DTC ads are among the most difficult print ads to read. Additionally, certain types of information contained in these print ads (such as information discussing a drug's risks and contraindications) are significantly more difficult to read than information in any other type of ad copy in magazines today. Implications for DTC marketers and the FDA are included.

Treatment of psychological factors in a child with difficult asthma: a case report.

PubMed

Anbar, Ran D; Sachdeva, Shagun

2011-07-01

Difficult asthma is defined as the persistence of asthma symptoms, abnormal pulmonary function showing airway obstruction, and continued requirement for short-acting bronchodilator therapy, despite adequate treatment with inhaled corticosteroids. It calls for a thorough evaluation of the patient to look into alternate and complicating diagnoses. The authors report a case of a 9-year-old patient with difficult asthma who failed to respond to conventional therapy. Although it was recognized that he had a number of potential medical complicating factors including allergies, chronic sinusitis, and gastroesophageal reflux, a psychological intervention using hypnosis ultimately appeared to help alleviate his symptoms completely. Thus, psychological evaluation and intervention should be considered early in the course of management of a patient with difficult asthma, because it may help avoid time-consuming and expensive investigations of potential complicating factors, and it may yield rapid improvement in the patient's clinical condition.

The Charlotte Collaborative Project: An Initiative to Improve Teaching and Learning by Helping Teachers Earn National Board Certification

ERIC Educational Resources Information Center

Anderson, Kelly M.; Hancock, Dawson R.; Jaus, Victoria P.

2004-01-01

Since its creation in 1987, the National Board for Professional Teaching Standards (NBPTS) has implemented a national voluntary system to assess and certify teachers who meet rigorous teaching standards. Testimony from over 16,000 NBPTS certified teachers has revealed that the journey toward certification is often difficult, time-consuming, and…

A Novel Method for the In-Depth Multimodal Analysis of Student Learning Trajectories in Intelligent Tutoring Systems

ERIC Educational Resources Information Center

Liu, Ran; Stamper, John; Davenport, Jodi

2018-01-01

Temporal analyses are critical to understanding learning processes, yet understudied in education research. Data from different sources are often collected at different grain sizes, which are difficult to integrate. Making sense of data at many levels of analysis, including the most detailed levels, is highly time-consuming. In this paper, we…

Student and Teacher Perceptions of the Use of Multimedia Supported Predict-Observe-Explain Tasks To Probe Understanding.

ERIC Educational Resources Information Center

Kearney, Matthew; Treagust, David F.; Yeo, Shelley; Zadnik, Marjan G.

2001-01-01

Discusses student and teacher perceptions of a new development in the use of the predict-observe-explain (POE) strategy. This development involves the incorporation of POE tasks into a multimedia computer program that uses real-life, digital video clips of difficult, expensive, time consuming, or dangerous scenarios as stimuli for these tasks.…

Method and apparatus for controlling electrode gap during vacuum consumable arc remelting

DOEpatents

Fisher, R.W.; Maroone, J.P.; Tipping, D.W.; Zanner, F.J.

During vacuum consumable arc remelting the electrode gap between a consumable electrode and a pool of molten metal is difficult to control. The present invention monitors drop shorts by detecting a decrease in the voltage between the consumable electrode and molten pool. The drop shorts and their associated voltage reductions occur as repetitive pulses which are closely correlated to the electrode gap. Thus, the method and apparatus of the present invention controls electrode gap based upon drop shorts detected from the monitored anode-cathode voltage. The number of drop shorts are accumulated, and each time the number of drop shorts reach a predetermined number, the average period between drop shorts is calculated from this predetermined number and the time in which this number is accumulated. This average drop short period is used in a drop short period electrode gap model which determines the actual electrode gap from the drop short. The actual electrode gap is then compared with a desired electrode gap which is selected to produce optimum operating conditions and the velocity of the consumable error is varied based upon the gap error. The consumable electrode is driven according to any prior art system at this velocity. In the preferred embodiment, a microprocessor system is utilized to perform the necessary calculations and further to monitor the duration of each drop short. If any drop short exceeds a preset duration period, the consumable electrode is rapidly retracted a predetermined distance to prevent bonding of the consumable electrode to the molten remelt.

Earth Science Data Education through Cooking Up Recipes

NASA Astrophysics Data System (ADS)

Weigel, A. M.; Maskey, M.; Smith, T.; Conover, H.

2016-12-01

One of the major challenges in Earth science research and applications is understanding and applying the proper methods, tools, and software for using scientific data. These techniques are often difficult and time consuming to identify, requiring novel users to conduct extensive research, take classes, and reach out for assistance, thus hindering scientific discovery and real-world applications. To address these challenges, the Global Hydrology Resource Center (GHRC) DAAC has developed a series of data recipes that novel users such as students, decision makers, and general Earth scientists can leverage to learn how to use Earth science datasets. Once the data recipe content had been finalized, GHRC computer and Earth scientists collaborated with a web and graphic designer to ensure the content is both attractively presented to data users, and clearly communicated to promote the education and use of Earth science data. The completed data recipes include, but are not limited to, tutorials, iPython Notebooks, resources, and tools necessary for addressing key difficulties in data use across a broad user base. These recipes enable non-traditional users to learn how to use data, but also curates and communicates common methods and approaches that may be difficult and time consuming for these users to identify.

eMovie: a storyboard-based tool for making molecular movies.

PubMed

Hodis, Eran; Schreiber, Gideon; Rother, Kristian; Sussman, Joel L

2007-05-01

The 3D structures of macromolecules are difficult to grasp and also to communicate. By their nature, movies or animations are particularly useful for highlighting key features by offering a 'guided tour' of structures and conformation changes. However, high-quality movies are rarely seen because they are currently difficult and time consuming to make. By adopting the traditional movie 'storyboard' concept, which gives guidance and direction to filming, eMovie makes the creation of lengthy molecular animations much easier. This tool is a plug-in for the open-source molecular graphics program PyMOL, and enables experts and novices alike to produce informative and high-quality molecular animations.

Sensitivity based coupling strengths in complex engineering systems

NASA Technical Reports Server (NTRS)

Bloebaum, C. L.; Sobieszczanski-Sobieski, J.

1993-01-01

The iterative design scheme necessary for complex engineering systems is generally time consuming and difficult to implement. Although a decomposition approach results in a more tractable problem, the inherent couplings make establishing the interdependencies of the various subsystems difficult. Another difficulty lies in identifying the most efficient order of execution for the subsystem analyses. The paper describes an approach for determining the dependencies that could be suspended during the system analysis with minimal accuracy losses, thereby reducing the system complexity. A new multidisciplinary testbed is presented, involving the interaction of structures, aerodynamics, and performance disciplines. Results are presented to demonstrate the effectiveness of the system reduction scheme.

Performance analysis of static locking in replicated distributed database systems

NASA Technical Reports Server (NTRS)

Kuang, Yinghong; Mukkamala, Ravi

1991-01-01

Data replication and transaction deadlocks can severely affect the performance of distributed database systems. Many current evaluation techniques ignore these aspects, because it is difficult to evaluate through analysis and time consuming to evaluate through simulation. A technique is used that combines simulation and analysis to closely illustrate the impact of deadlock and evaluate performance of replicated distributed database with both shared and exclusive locks.

Use of pyrolysis molecular beam mass spectrometry (py-MBMS) to characterize forest soil carbon: method and preliminary results

Treesearch

K.A. Magrini; R.J. Evans; C.M. Hoover; C.C. Elam; M.F. Davis

2002-01-01

The components of soil organic matter (SOM) and their degradation dynamics in forest soils are difficult to study and thus poorly understood,due to time-consuming sample collection, preparation, and difficulty of analyzing and identifying major components. As a result, changes in soil organic matter chemical composition as a function of age, forest type, or disturbance...

Modeling Post-Accident Vehicle Egress

DTIC Science & Technology

2013-01-01

interest for military situations may involve rolled-over vehicles for which detailed movement data are not available. In the current design process...test trials. These evaluations are expensive and time-consuming, and are often performed late in the design process when it is too difficult to...alter the design if weaknesses are discovered. Yet, due to the limitations of current software tools, digital human models (DHMs) are not yet widely

Electronic Resource Management 2.0: Using Web 2.0 Technologies as Cost-Effective Alternatives to an Electronic Resource Management System

ERIC Educational Resources Information Center

Murray, Adam

2008-01-01

Designed to assist with the management of e-resources, electronic resource management (ERM) systems are time- and fund-consuming to purchase and maintain. Questions of system compatibility, data population, and workflow design/redesign can be difficult to answer; sometimes those answers are not what we'd prefer to hear. The two primary functions…

Generic and Automated Runtime Program Repair

DTIC Science & Technology

2012-09-01

other person or corporation; or convey any rights or permission to manufacture, use, or sell any patented invention that may relate to them... PERSON PATRICK M. HURLEY a. REPORT U b. ABSTRACT U c. THIS PAGE U 19b. TELEPONE NUMBER (Include area code) N/A Standard Form 298...Public Release; Distribution Unlimited. 2. Introduction Software bugs are ubiquitous, and fixing them remains a difficult, time- consuming , and manual

Drop short control of electrode gap

DOEpatents

Fisher, Robert W.; Maroone, James P.; Tipping, Donald W.; Zanner, Frank J.

1986-01-01

During vacuum consumable arc remelting the electrode gap between a consumable electrode and a pool of molten metal is difficult to control. The present invention monitors drop shorts by detecting a decrease in the voltage between the consumable electrode and molten pool. The drop shorts and their associated voltage reductions occur as repetitive pulses which are closely correlated to the electrode gap. Thus, the method and apparatus of the present invention controls electrode gap based upon drop shorts detected from the monitored anode-cathode voltage. The number of drop shorts are accumulated, and each time the number of drop shorts reach a predetermined number, the average period between drop shorts is calculated from this predetermined number and the time in which this number is accumulated. This average drop short period is used in a drop short period electrode gap model which determines the actual electrode gap from the drop short. The actual electrode gap is then compared with a desired electrode gap which is selected to produce optimum operating conditions and the velocity of the consumable error is varied based upon the gap error. The consumable electrode is driven according to any prior art system at this velocity. In the preferred embodiment, a microprocessor system is utilized to perform the necessary calculations and further to monitor the duration of each drop short. If any drop short exceeds a preset duration period, the consumable electrode is rapidly retracted a predetermined distance to prevent bonding of the consumable electrode to the molten remelt.

Optimizing ELISAs for precision and robustness using laboratory automation and statistical design of experiments.

PubMed

Joelsson, Daniel; Moravec, Phil; Troutman, Matthew; Pigeon, Joseph; DePhillips, Pete

2008-08-20

Transferring manual ELISAs to automated platforms requires optimizing the assays for each particular robotic platform. These optimization experiments are often time consuming and difficult to perform using a traditional one-factor-at-a-time strategy. In this manuscript we describe the development of an automated process using statistical design of experiments (DOE) to quickly optimize immunoassays for precision and robustness on the Tecan EVO liquid handler. By using fractional factorials and a split-plot design, five incubation time variables and four reagent concentration variables can be optimized in a short period of time.

Energy Education Incentives: Evaluating the Impact of Consumer Energy Kits

ERIC Educational Resources Information Center

Kirby, Sarah D.; Guin, Autumn; Langham, Laura

2015-01-01

Measuring the energy and environmental impact of residential energy education efforts is difficult. The E-Conservation residential energy management program uses consumer energy kits to document the impact of energy-efficient improvements. The consumer energy kit provides an incentive for individuals attending energy education workshop, helps…

Mental health consumers' with medical co‐morbidity experience of the transition through tertiary medical services to primary care

PubMed Central

Cranwell, Kate; Polacsek, Meg

2016-01-01

Abstract Medical comorbidity in people with long‐term mental illness is common and often undetected; however, these consumers frequently experience problems accessing and receiving appropriate treatment in public health‐care services. The aim of the present study was to understand the lived experience of mental health consumers with medical comorbidity and their carers transitioning through tertiary medical to primary care services. An interpretative, phenomenological analysis approach was used, and semistructured, video‐recorded, qualitative interviews were used with 12 consumers and four primary caregivers. Four main themes and related subthemes were abstracted from the data, highlighting consumer's and carers’ experience of transition through tertiary medical to primary care services: (i) accessing tertiary services is difficult and time consuming; (ii) contrasting experiences of clinician engagement and support; (iii) lack of continuity between tertiary medical and primary care services; and (iv) Mental Health Hospital Admission Reduction Programme (MH HARP) clinicians facilitating transition. Our findings have implications for organisational change, expanding the role of MH HARP clinicians (whose primary role is to provide consumers with intensive support and care coordination to prevent avoidable tertiary medical hospital use), and the employment of consumer and carer consultants in tertiary medical settings, especially emergency departments. PMID:26735771

Biosimilars: More Treatment Choices and Innovation

MedlinePlus

... Consumers Consumer Updates Biosimilars: More Treatment Choices and Innovation Share Tweet Linkedin Pin it More sharing options ... developing biologics generally is a far more difficult process than manufacturing conventional drugs. A biosimilar is a ...

Performance analysis of static locking in replicated distributed database systems

NASA Technical Reports Server (NTRS)

Kuang, Yinghong; Mukkamala, Ravi

1991-01-01

Data replications and transaction deadlocks can severely affect the performance of distributed database systems. Many current evaluation techniques ignore these aspects, because it is difficult to evaluate through analysis and time consuming to evaluate through simulation. Here, a technique is discussed that combines simulation and analysis to closely illustrate the impact of deadlock and evaluate performance of replicated distributed databases with both shared and exclusive locks.

Ultrasound Guidance as a Rescue Technique for Peripheral Intravenous Cannulation

DTIC Science & Technology

2006-09-14

painful, time consuming, and may result in arterial puncture, nerve damage, and paresthes ias.5 Other routes such as central venous or venous cut down...peripherally inserted central lines-PICCS), femoral catheterizations during cardiopulmonary resuscitation, and peripheral IV catheters in difficult...techniques for gaining venous access. What to do when peripheral intravenous catheterization is not possible. J Crit 11/n. 1993;8:435-442. 2. Nee PA

Use of Severity of Illness Indexes for Assessing Health Care Provider Performance

DTIC Science & Technology

1985-07-01

Exclusive reliance on manual selection of the inpatient records would have proven difficult and time consuming. Appendix B contains correspondence...presence of mortalities or complications following surgery. Results obtained from the two-fold PASBA screen and manual selection process represent a...information provided include the last four numbers of each patient’s social security number, register number, procedure and occurrence found. A manual

Influence of 1-MCP treatments on eating quality and consumer preferences of ‘Qinmei’ kiwifruit during shelf life

USDA-ARS?s Scientific Manuscript database

Consumers and growers in China sometime complain that Kiwifruits treated with an ethylene action inhibitor 1-MCP are difficult to ripen and show poor eating quality. This study addresses the quality parameters affecting consumer preferences and reevaluates the necessity of 1-MCP application for stor...

Comparison of sensory perception and verbal expression of Korean Kimchi stews between Chinese consumers and Korean trained panelists.

PubMed

Park, Hye-Won; Kim, Young Choul; Jang, Seong-Ho; Hong, Jae-Hee

2018-05-25

Sensory drivers of liking in foreign food markets are difficult to identify because expression of perceived characteristics varies depending on cultural differences. We aimed to identify differences in perception and expression of a Korean home meal replacement product (Kimchi stew) between 10 Korean trained panelists and 50 eastern Chinese consumers (EC) and 54 northern Chinese consumers (NC) using descriptive analysis and rate-all-that-apply (RATA) tests. Regional differences between EC and NC groups were also investigated. Sensory representations of the six Kimchi stew samples were similar between the Korean trained and Chinese consumer panels. Use of simple sensory RATA terms was similar among the groups. However, EC whose daily diet has mild flavors associated consumer terms with negative connotations, such as odd flavor and sharp, with burning sensation and seasoning, implying the influence of regional food cultures. RATA could elicit foreign consumers' sensory representations of an unfamiliar ethnic food that was comparable to that from descriptive analysis, assisting researchers in understanding target consumers' sensory perceptions in a more cost- and time-effective manner. Inclusion of consumer terms in a RATA list and its correlation with descriptive analysis by a native descriptive panel can help in understanding foreign consumers' verbal expressions This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Consumer Protection--Who Protects You? How Can You Protect Yourself? Proceed with Caution: Consumer Safety In the Home, I.

ERIC Educational Resources Information Center

Saskatchewan Consumer and Commercial Affairs, Regina.

The enormous and rapidly-increasing number of goods on the market makes it difficult to ensure that all consumer products are safe to use. Public concern about product safety has caused the enactment of a wide range of consumer protection laws. The result of this legislation has been that many agencies have been established to protect the public.…

Using a Virtual Store As a Research Tool to Investigate Consumer In-store Behavior.

PubMed

Ploydanai, Kunalai; van den Puttelaar, Jos; van Herpen, Erica; van Trijp, Hans

2017-07-24

People's responses to products and/or choice environments are crucial to understanding in-store consumer behaviors. Currently, there are various approaches (e.g., surveys or laboratory settings) to study in-store behaviors, but the external validity of these is limited by their poor capability to resemble realistic choice environments. In addition, building a real store to meet experimental conditions while controlling for undesirable effects is costly and highly difficult. A virtual store developed by virtual reality techniques potentially transcends these limitations by offering the simulation of a 3D virtual store environment in a realistic, flexible, and cost-efficient way. In particular, a virtual store interactively allows consumers (participants) to experience and interact with objects in a tightly controlled yet realistic setting. This paper presents the key elements of using a desktop virtual store to study in-store consumer behavior. Descriptions of the protocol steps to: 1) build the experimental store, 2) prepare the data management program, 3) run the virtual store experiment, and 4) organize and export data from the data management program are presented. The virtual store enables participants to navigate through the store, choose a product from alternatives, and select or return products. Moreover, consumer-related shopping behaviors (e.g., shopping time, walking speed, and number and type of products examined and bought) can also be collected. The protocol is illustrated with an example of a store layout experiment showing that shelf length and shelf orientation influence shopping- and movement-related behaviors. This demonstrates that the use of a virtual store facilitates the study of consumer responses. The virtual store can be especially helpful when examining factors that are costly or difficult to change in real life (e.g., overall store layout), products that are not presently available in the market, and routinized behaviors in familiar environments.

Consumer panel study on elderly people's wishes concerning services.

PubMed

Valkila, Noora; Litja, Heli; Aalto, Leena; Saari, Arto

2010-01-01

This study informs on the wishes and needs of elderly people themselves regarding services for the elderly. The data for the study were gathered using a consumer panel method. Elderly people desire assistance in heavy cleaning chores, in outdoor activities and in carrying out their personal business. Elderly people felt that there should be more recreational services available. Elderly people link aging with feelings of insecurity and loneliness. Becoming a service user for the first time is felt to be a very difficult step to take, and so this decision is postponed as long as possible. The elderly people desire a service for assessing their individual service needs in an organized, expert and objective fashion. The study indicates that elderly people value the human contact gained through service provision. The consumer panel method for collecting data was successful. Copyright © 2009 Elsevier Ireland Ltd. All rights reserved.

Persistent Identifiers for Improved Accessibility for Linked Data Querying

NASA Astrophysics Data System (ADS)

Shepherd, A.; Chandler, C. L.; Arko, R. A.; Fils, D.; Jones, M. B.; Krisnadhi, A.; Mecum, B.

2016-12-01

The adoption of linked open data principles within the geosciences has increased the amount of accessible information available on the Web. However, this data is difficult to consume for those who are unfamiliar with Semantic Web technologies such as Web Ontology Language (OWL), Resource Description Framework (RDF) and SPARQL - the RDF query language. Consumers would need to understand the structure of the data and how to efficiently query it. Furthermore, understanding how to query doesn't solve problems of poor precision and recall in search results. For consumers unfamiliar with the data, full-text searches are most accessible, but not ideal as they arrest the advantages of data disambiguation and co-reference resolution efforts. Conversely, URI searches across linked data can deliver improved search results, but knowledge of these exact URIs may remain difficult to obtain. The increased adoption of Persistent Identifiers (PIDs) can lead to improved linked data querying by a wide variety of consumers. Because PIDs resolve to a single entity, they are an excellent data point for disambiguating content. At the same time, PIDs are more accessible and prominent than a single data provider's linked data URI. When present in linked open datasets, PIDs provide balance between the technical and social hurdles of linked data querying as evidenced by the NSF EarthCube GeoLink project. The GeoLink project, funded by NSF's EarthCube initiative, have brought together data repositories include content from field expeditions, laboratory analyses, journal publications, conference presentations, theses/reports, and funding awards that span scientific studies from marine geology to marine ecosystems and biogeochemistry to paleoclimatology.

A real-time error-free color-correction facility for digital consumers

NASA Astrophysics Data System (ADS)

Shaw, Rodney

2008-01-01

It has been well known since the earliest days of color photography that color-balance in general, and facial reproduction (flesh tones) in particular, are of dominant interest to the consumer, and significant research resources have been expended in satisfying this need. The general problem is a difficult one, spanning the factors that govern perception and personal preference, the physics and chemistry of color reproduction, as well as wide field of color measurement specification, and analysis. However, with the advent of digital photography and its widespread acceptance in the consumer market, and with the possibility of a much greater degree of individual control over color reproduction, the field is taking on a new consumer-driven impetus, and the provision of user facilities for preferred color choice now constitutes an intense field of research. In addition, due to the conveniences of digital technology, the collection of large data bases and statistics relating to individual color preferences have now become a relatively straightforward operation. Using a consumer preference approach of this type, we have developed a user-friendly facility whereby unskilled consumers may manipulate the color of their personal digital images according to their preferred choice. By virtue of its ease of operation and the real-time nature of the color-correction transforms, this facility can readily be inserted anywhere a consumer interacts with a digital image, from camera, printer, or scanner, to web or photo-kiosk. Here the underlying scientific principles are explored in detail, and these are related to the practical color-preference outcomes. Examples are given of the application to the correction of images with unsatisfactory color balance, and especially to flesh tones and faces, and the nature of the consumer controls and their corresponding image transformations are explored.

Design and implementation of Bluetooth beacon in mobile payment system

NASA Astrophysics Data System (ADS)

Han, Tiantian; Ding, Lei

2017-08-01

The current line of payment means, mainly in the following ways, cash payment, credit card payment, WeChat Alipay sweep payment. There are many inconvenience in Cash payment, large amounts of cash inconvenience to carry, count the money to spend time and effort, true and false banknotes difficult to distinguish, ticket settlement easy to go wrong. Credit card payment is relatively time-consuming, and WeChat Alipay sweep payment need to sweep. Therefore, the design of a convenient, fast payment to meet the line to pay the demand is particularly important. Based on the characteristics of BLE Bluetooth wireless communication technology, this paper designs a kind of payment method based on Bluetooth beacon. Through the Bluetooth beacon broadcast consumption, consumers only need to open the relevant APP in the Android client, and you can get Bluetooth via mobile phone Bluetooth the amount of consumption of the standard broadcast, in accordance with the corresponding payment platform to complete the payment process, which pay less time to improve the efficiency of payment.

Identification of the significant factors in food safety using global sensitivity analysis and the accept-and-reject algorithm: application to the cold chain of ham.

PubMed

Duret, Steven; Guillier, Laurent; Hoang, Hong-Minh; Flick, Denis; Laguerre, Onrawee

2014-06-16

Deterministic models describing heat transfer and microbial growth in the cold chain are widely studied. However, it is difficult to apply them in practice because of several variable parameters in the logistic supply chain (e.g., ambient temperature varying due to season and product residence time in refrigeration equipment), the product's characteristics (e.g., pH and water activity) and the microbial characteristics (e.g., initial microbial load and lag time). This variability can lead to different bacterial growth rates in food products and has to be considered to properly predict the consumer's exposure and identify the key parameters of the cold chain. This study proposes a new approach that combines deterministic (heat transfer) and stochastic (Monte Carlo) modeling to account for the variability in the logistic supply chain and the product's characteristics. The model generates a realistic time-temperature product history , contrary to existing modeling whose describe time-temperature profile Contrary to existing approaches that use directly a time-temperature profile, the proposed model predicts product temperature evolution from the thermostat setting and the ambient temperature. The developed methodology was applied to the cold chain of cooked ham including, the display cabinet, transport by the consumer and the domestic refrigerator, to predict the evolution of state variables, such as the temperature and the growth of Listeria monocytogenes. The impacts of the input factors were calculated and ranked. It was found that the product's time-temperature history and the initial contamination level are the main causes of consumers' exposure. Then, a refined analysis was applied, revealing the importance of consumer behaviors on Listeria monocytogenes exposure. Copyright © 2014. Published by Elsevier B.V.

Cancer screening in the older adult: issues and concerns.

PubMed

Craft, Melissa

2014-06-01

Making individual recommendations for cancer screening in older adult patients may be difficult and time consuming, because of the need to incorporate complex issues of life expectancy, health status, risks and benefits, and individual values and wishes. In this article, current recommendations and related risks and benefits are summarized. Specific issues and concerns are addressed, with suggestions for strategies to assist older adults in making screening decisions. Copyright © 2014 Elsevier Inc. All rights reserved.

Establishing Theater Command and Control In a Coalition of Nations: Requirements for U.S. Doctrine

DTIC Science & Technology

1992-05-01

difficult and time consuming to establish effective coalition relations . Given the above, US doctrine for coalition theater C2 must go beyond the...make a disproportionate effort to do so. Related to the shared cultural heritage Is a common religious history. Both nations were predominantly Judeo...Inhibited. 6 The language difference too was substantial. The Korean language, Hangul, Is related to Chinese, but with Its own alphabet, one that bears no

Managing a Real-Time Embedded Linux Platform with Buildroot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diamond, J.; Martin, K.

2015-01-01

Developers of real-time embedded software often need to build the operating system, kernel, tools and supporting applications from source to work with the differences in their hardware configuration. The first attempts to introduce Linux-based real-time embedded systems into the Fermilab accelerator controls system used this approach but it was found to be time-consuming, difficult to maintain and difficult to adapt to different hardware configurations. Buildroot is an open source build system with a menu-driven configuration tool (similar to the Linux kernel build system) that automates this process. A customized Buildroot [1] system has been developed for use in the Fermilabmore » accelerator controls system that includes several hardware configuration profiles (including Intel, ARM and PowerPC) and packages for Fermilab support software. A bootable image file is produced containing the Linux kernel, shell and supporting software suite that varies from 3 to 20 megabytes large – ideal for network booting. The result is a platform that is easier to maintain and deploy in diverse hardware configurations« less

Our experience with a new instrument for laparoscopic gallbladder extraction, the "Bergetrokar".

PubMed

Höferlin, A; Höhle, K D

1993-01-01

Laparoscopic cholecystectomy has become a standardized technique within the last years. However, the extraction of the stone-filled gallbladder often becomes a time-consuming and difficult part of the operation. We have developed a new instrument for quick and safe extraction of the stone-filled gallbladder. The instrument, called "Bergetrokar", is a trocar cannula with a trumpet valve and cone-shaped tip which can be spread. The application of this device is simple. After using the "Bergetrokar" in about 180 cases we have not observed any perforation of the gallbladder or loss of stones. Extraction times were reduced.

The difficult legacy of Turing's wager.

PubMed

Thwaites, Andrew; Soltan, Andrew; Wieser, Eric; Nimmo-Smith, Ian

2017-08-01

Describing the human brain in mathematical terms is an important ambition of neuroscience research, yet the challenges remain considerable. It was Alan Turing, writing in 1950, who first sought to demonstrate how time-consuming such an undertaking would be. Through analogy to the computer program, Turing argued that arriving at a complete mathematical description of the mind would take well over a thousand years. In this opinion piece, we argue that - despite seventy years of progress in the field - his arguments remain both prescient and persuasive.

The Feasibility of a Decision Support System for the Determination of Source Selection Evaluation Criteria

DTIC Science & Technology

1984-09-01

is not only difficult and time consuming , but also crucial to the success of the project, the question is whether a decision support system designed...KtI I - uAujvhIMtf IENE In THE FEASIBILITY OF A DECISION SUPPORT SYSTEM FOR THE DETERMINATION OF SOURCE SELECTION EVALUATION ’CRITERIA THESIS .2...INSTITUTE OF TECHNOLOGY Wright-Patterson Air Force Base, Ohio DZM=0N STATEMENT A ,’r !’ILMILSHIM S /8 4 THE FEASIBILITY OF A DECISION SUPPORT SYSTEM FOR

The Coast Artillery Journal. Volume 65, Number 5, November 1926

DTIC Science & Technology

1926-11-01

frequently that "it is written" has come to mean "it is true." To plan a course by dividing the number of pages in a text by the number of lesson periods...questions; and it permits computations to be checked for method. Its disadvantages are that it is a time-consumer; it is exceedingly difficult to grade the...student are not shown; that computations are not shown and hence cannot be checked for method; and that the prepara- tion of examinations (requiring

Eating out in Spain: Motivations, sociability and consumer contexts.

PubMed

Díaz-Méndez, Cecilia; García-Espejo, Isabel

2017-12-01

Eating out is a consumer practice which is difficult to define. The study of this practice has traditionally been based on the work/leisure dichotomy. However, in Spain this is not so clear. If we analyse profiles, motivations, places and relationships, we discover an eating-out food model which is specific to Spain and in which food is not limited by this dual link with work and leisure. Eating linked to work does not respond only to instrumental needs. Leisure eating is not always a choice based on preference. Both contain a strong element of sociability which acts as a motivator and are linked to the familisme of Spanish society, whilst at the same time de-routinizing daily life, both at home and at work. This study is based on a national survey carried out in 2014 and helps to understand this consumer practice and those elements which are specific to Spain. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Cost and Value of Marketing Analysis. AIR Forum Paper 1978.

ERIC Educational Resources Information Center

Thompson, Fred

Product-market planning is an inherently difficult practice. It aims at a match between consumer preference and institutional behavior. Unfortunately, consumer reactions to changes in institutional behavior are often highly uncertain. This paper assumes that institutional planners should neither ignore uncertainty nor seek to avoid all actions…

Advertising's Role in a Service Industry: Health Care.

ERIC Educational Resources Information Center

Oliver, Lauren K.

Although wide variations exist among service professions, several common attributes affect the role of advertising in the service industries. For example, because a service is intangible, it cannot be evaluated before purchased or consumed. Depending on the degree of intangibility, the consumer's assessment becomes that much more difficult, and…

Is advising food allergic patients to avoid food with precautionary allergen labelling out of date?

PubMed

Zurzolo, Giovanni A; de Courten, Maximilian; Koplin, Jennifer; Mathai, Michael L; Allen, Katrina J

2016-06-01

Precautionary allergen labelling (PAL) continues to be used by the food manufacturing industry to alert the food allergic consumer that cross-contact may have occurred during the supply chain for ingredients or the manufacturing process. This review will summarize recent evidence regarding use and interpretation of precautionary labels by industry, healthcare professionals, and food allergic consumers. Consumers find precautionary labels difficult to interpret and often distrust them as disclaimers of product liability. It is unclear from a clinician's perspective how healthcare professionals should advise their patients regarding these statements. Recent studies suggest that consumers do not always read food labels and that these labels are difficult to interpret and are often distrusted by consumers as disclaimers of liability. There is evidence to suggest that this behaviour occurs in all countries assessed that use PAL. The healthcare professional remains confused about the interpretation and value of the current PAL system as it is unclear whether foods that contain no advisory labels are safe to consume. There is a need for improvement in the value and use of precautionary labelling for allergen risk assessment for allergic consumers. New studies have shown the confusion that currently exists in regard to PAL for the healthcare professional and the consumer alike. The studies have also highlighted certain gaps in the literature that, once addressed, will improve the uniformity of PAL and provide the healthcare professional with appropriate advice which they can in turn relay to the allergic consumer. Because of the global supply of food products there is a need for an international approach in improving PAL.

The Process of Seeking Psychotherapy and Its Impact on Therapy Expectations and Experiences.

PubMed

Elliott, Katherine P; Westmacott, Robin; Hunsley, John; Rumstein-McKean, Orly; Best, Marlene

2015-01-01

Seeking psychotherapy can be conceptualized as having three stages: deciding that therapy might help, deciding to seek therapy and contacting a therapist. The present study examined the duration and difficulty of clients' decisions to seek psychotherapy and whether these experiences were predictive of expected difficulty and commitment to the therapy process. One-hundred and fifty-five adults seeking individual psychological services from a university training clinic were assessed before intake; 107 of these participants also completed measures between the third and fourth therapy sessions and at post-therapy. Deciding that therapy might help was reported to be the most difficult step and took the longest, with each subsequent step becoming easier and briefer. At each step, the more difficult the decision, the more time participants took to make it. Higher distress was associated with more difficulty in deciding that therapy might help and deciding to seek therapy. Duration and difficulty of decisions to seek therapy were positively correlated with expectations of difficulty in therapy as measured prior to treatment and following the third session but were not associated with participants' commitment to therapy. The implications of these results for clinicians and mental health services are discussed. The most difficult and time-consuming step for those who seek mental health services is recognizing that their distressing experiences are connected to mental health; clinicians may aid this challenge by providing information on the nature of mental disorders and common symptoms of emotional distress on websites or through other means (e.g., physicians' waiting rooms and advertising campaigns). The next most difficult and time-consuming step for those who seek mental health services is deciding that psychotherapy may help; by providing easily accessible information (e.g., on websites) about what psychotherapy entails, including clinicians' expectations of clients and the benefits/challenges of therapy, potential clients may be able to progress through this step more rapidly and with less difficulty. Clients' expectations of the value of psychotherapy and their commitment to engage in therapy do not appear to be affected by how long it took, or how difficult it was, to obtain psychotherapy. Factors such as forming a strong therapeutic alliance and providing support and guidance during the initial sessions of therapy may be more important in helping potential clients commit to therapy than what they experienced in their efforts to receive psychotherapy. Copyright © 2014 John Wiley & Sons, Ltd.

Real-time volume rendering of 4D image using 3D texture mapping

NASA Astrophysics Data System (ADS)

Hwang, Jinwoo; Kim, June-Sic; Kim, Jae Seok; Kim, In Young; Kim, Sun Il

2001-05-01

Four dimensional image is 3D volume data that varies with time. It is used to express deforming or moving object in virtual surgery of 4D ultrasound. It is difficult to render 4D image by conventional ray-casting or shear-warp factorization methods because of their time-consuming rendering time or pre-processing stage whenever the volume data are changed. Even 3D texture mapping is used, repeated volume loading is also time-consuming in 4D image rendering. In this study, we propose a method to reduce data loading time using coherence between currently loaded volume and previously loaded volume in order to achieve real time rendering based on 3D texture mapping. Volume data are divided into small bricks and each brick being loaded is tested for similarity to one which was already loaded in memory. If the brick passed the test, it is defined as 3D texture by OpenGL functions. Later, the texture slices of the brick are mapped into polygons and blended by OpenGL blending functions. All bricks undergo this test. Continuously deforming fifty volumes are rendered in interactive time with SGI ONYX. Real-time volume rendering based on 3D texture mapping is currently available on PC.

ISPATOM: A Generic Real-Time Data Processing Tool Without Programming

NASA Technical Reports Server (NTRS)

Dershowitz, Adam

2007-01-01

Information Sharing Protocol Advanced Tool of Math (ISPATOM) is an application program allowing for the streamlined generation of comps, which subscribe to streams of incoming telemetry data, perform any necessary computations on the data, then send the data to other programs for display and/or further processing in NASA mission control centers. Heretofore, the development of comps was difficult, expensive, and time-consuming: Each comp was custom written manually, in a low-level computing language, by a programmer attempting to follow requirements of flight controllers. ISPATOM enables a flight controller who is not a programmer to write a comp by simply typing in one or more equation( s) at a command line or retrieving the equation(s) from a text file. ISPATOM then subscribes to the necessary input data, performs all of necessary computations, and sends out the results. It sends out new results whenever the input data change. The use of equations in ISPATOM is no more difficult than is entering equations in a spreadsheet. The time involved in developing a comp is thus limited to the time taken to decide on the necessary equations. Thus, ISPATOM is a real-time dynamic calculator.

Encryption and decryption algorithm using algebraic matrix approach

NASA Astrophysics Data System (ADS)

Thiagarajan, K.; Balasubramanian, P.; Nagaraj, J.; Padmashree, J.

2018-04-01

Cryptographic algorithms provide security of data against attacks during encryption and decryption. However, they are computationally intensive process which consume large amount of CPU time and space at time of encryption and decryption. The goal of this paper is to study the encryption and decryption algorithm and to find space complexity of the encrypted and decrypted data by using of algorithm. In this paper, we encrypt and decrypt the message using key with the help of cyclic square matrix provides the approach applicable for any number of words having more number of characters and longest word. Also we discussed about the time complexity of the algorithm. The proposed algorithm is simple but difficult to break the process.

An incremental community detection method for social tagging systems using locality-sensitive hashing.

PubMed

Wu, Zhenyu; Zou, Ming

2014-10-01

An increasing number of users interact, collaborate, and share information through social networks. Unprecedented growth in social networks is generating a significant amount of unstructured social data. From such data, distilling communities where users have common interests and tracking variations of users' interests over time are important research tracks in fields such as opinion mining, trend prediction, and personalized services. However, these tasks are extremely difficult considering the highly dynamic characteristics of the data. Existing community detection methods are time consuming, making it difficult to process data in real time. In this paper, dynamic unstructured data is modeled as a stream. Tag assignments stream clustering (TASC), an incremental scalable community detection method, is proposed based on locality-sensitive hashing. Both tags and latent interactions among users are incorporated in the method. In our experiments, the social dynamic behaviors of users are first analyzed. The proposed TASC method is then compared with state-of-the-art clustering methods such as StreamKmeans and incremental k-clique; results indicate that TASC can detect communities more efficiently and effectively. Copyright © 2014 Elsevier Ltd. All rights reserved.

Developing a Benchmark Tool for Sustainable Consumption: An Iterative Process

ERIC Educational Resources Information Center

Heiskanen, E.; Timonen, P.; Nissinen, A.; Gronroos, J.; Honkanen, A.; Katajajuuri, J. -M.; Kettunen, J.; Kurppa, S.; Makinen, T.; Seppala, J.; Silvenius, F.; Virtanen, Y.; Voutilainen, P.

2007-01-01

This article presents the development process of a consumer-oriented, illustrative benchmarking tool enabling consumers to use the results of environmental life cycle assessment (LCA) to make informed decisions. LCA provides a wealth of information on the environmental impacts of products, but its results are very difficult to present concisely…

Customer and household matching: resolving entity identity in data warehouses

NASA Astrophysics Data System (ADS)

Berndt, Donald J.; Satterfield, Ronald K.

2000-04-01

The data preparation and cleansing tasks necessary to ensure high quality data are among the most difficult challenges faced in data warehousing and data mining projects. The extraction of source data, transformation into new forms, and loading into a data warehouse environment are all time consuming tasks that can be supported by methodologies and tools. This paper focuses on the problem of record linkage or entity matching, tasks that can be very important in providing high quality data. Merging two or more large databases into a single integrated system is a difficult problem in many industries, especially in the wake of acquisitions. For example, managing customer lists can be challenging when duplicate entries, data entry problems, and changing information conspire to make data quality an elusive target. Common tasks with regard to customer lists include customer matching to reduce duplicate entries and household matching to group customers. These often O(n2) problems can consume significant resources, both in computing infrastructure and human oversight, and the goal of high accuracy in the final integrated database can be difficult to assure. This paper distinguishes between attribute corruption and entity corruption, discussing the various impacts on quality. A metajoin operator is proposed and used to organize past and current entity matching techniques. Finally, a logistic regression approach to implementing the metajoin operator is discussed and illustrated with an example. The metajoin can be used to determine whether two records match, don't match, or require further evaluation by human experts. Properly implemented, the metajoin operator could allow the integration of individual databases with greater accuracy and lower cost.

Building America Case Study: Simple Retrofit High-Efficiency Natural Gas Water Heater Field Test, Minneapolis, Minnesota

DOE Office of Scientific and Technical Information (OSTI.GOV)

T. Schirber, B. Schoenbauer

High-performance water heaters are typically more time consuming and costly to install in retrofit applications, making high-performance water heaters difficult to justify economically. However, recent advancements in high-performance water heaters have targeted the retrofit market, simplifying installations and reducing costs. Four high-efficiency natural gas water heaters designed specifically for retrofit applications were installed in single-family homes along with detailed monitoring systems to characterize their savings potential, their installed efficiencies, and their ability to meet household demands.

A Lexical-Ontological Resource for Consumer Healthcare

NASA Astrophysics Data System (ADS)

Cardillo, Elena; Serafini, Luciano; Tamilin, Andrei

In Consumer Healthcare Informatics it is still difficult for laypeople to find, understand and act on health information, due to the persistent communication gap between specialized medical terminology and that used by healthcare consumers. Furthermore, existing clinically-oriented terminologies cannot provide sufficient support when integrated into consumer-oriented applications, so there is a need to create consumer-friendly terminologies reflecting the different ways healthcare consumers express and think about health topics. Following this direction, this work suggests a way to support the design of an ontology-based system that mitigates this gap, using knowledge engineering and semantic web technologies. The system is based on the development of a consumer-oriented medical terminology that will be integrated with other medical domain ontologies and terminologies into a medical ontology repository. This will support consumer-oriented healthcare systems, such as Personal Health Records, by providing many knowledge services to help users in accessing and managing their healthcare data.

A Lexical-Ontological Resource for Consumer Heathcare

NASA Astrophysics Data System (ADS)

Cardillo, Elena

In Consumer Healthcare Informatics it is still difficult for laypersons to understand and act on health information, due to the persistent communication gap between specialized medical terminology and that used by healthcare consumers. Furthermore, existing clinically-oriented terminologies cannot provide sufficient support when integrated into consumer-oriented applications, so there is a need to create consumer-friendly terminologies reflecting the different ways healthcare consumers express and think about health topics. Following this direction, this work suggests a way to support the design of an ontology-based system that mitigates this gap, using knowledge engineering and Semantic Web technologies. The system is based on the development of a consumer-oriented medical terminology which will be integrated with other existing domain ontologies/terminologies into a medical ontology repository. This will support consumer-oriented healthcare systems by providing many knowledge services to help users in accessing and managing their healthcare data.

Social marketing: two views, two opportunities.

PubMed

Saunders, S; Smith, W A

1984-01-01

Social marketing can refer to the promotion of either a product or an idea. The 1st approach includes the sale of a socially beneficial product such as condoms or oral rehydration salts. Although the product is generally subsidized to keep costs within the reach of consumers, the actual sale is considered critical because of its role in ensuring consumer motivation, increasing internal efficiency, and facilitating longterm self-sufficiency of the program. The 2nd approach stresses the promotion of socially beneficial ideas and practices rather than products, e.g. breastfeeding. Social products differ from commercial products in several important ways: they are more complex, often more controversial, less immediately satisfying to the consumer, require more spectacular results, and are aimed at an audience with fewer resources than most consumers of commercial products. In addition, there are many factors that make social marketing more difficult difficult than marketing in the commercial sector. Social programs have less control over the delivery system and consumer research is more complicated. Despite these differences, both social and commerical marketing are organized aroung the same 4 qualities: product, price, place, and promotion. The product must be configured to maximized consumer acceptance and use. Hidden costs must be considered. There must be an adequate distribution and supply system to ensure easy availability of the product. Finally, the product must be promoted through different communication channels by a wide array of techniques. Attention to these 4 factors can significantly enhance social service delivery of both products and ideas.

Producing and Consuming the Controversial--A Social Media Perspective on Political Conversations in the Social Science Classroom

ERIC Educational Resources Information Center

Andersson, Erik

2016-01-01

Teachers find it difficult to conduct political controversial conversations in the social science classroom and due to an increased use of social media in educational settings new challenges and possibilities are raised. The use of social media causes fundamental changes to the role of the learner who becomes a producer and consumer--a…

Direct-to-consumer DNA testing and the GP.

PubMed

Trent, Ronald

2014-07-01

From early 2000 a new form of DNA genetic testing became available commercially. It bypasses the medical practitioner and can be ordered directly by the individual. To understand direct-to-consumer (DTC) DNA genetic testing and be able to respond appropriately if asked to be involved by a patient. Presently, all but one or two DTC DNA genetic testing laboratories are located outside Australia. The industry promotes itself as a means to better health through giving individuals complete control over their results. When communicating with patients about DTC DNA genetic testing, general practitioners will need to make a determination about the clinical utility of the test and the laboratory validity, both of which can be difficult in the current environment. Assistance may be available through public hospital clinical genetics services, although waiting times can be long. There is likely to be tighter regulation of these types of testing in the future, which may include involvement of medical practitioners.

Balancing consumer protection and scientific integrity in the face of uncertainty: the example of gluten-free foods.

PubMed

McCabe, Margaret Sova

2010-01-01

In 2009, gluten-free foods were not only "hot" in the marketplace, several countries, including the United States, continued efforts to define gluten-free and appropriate labeling parameters. The regulatory process illuminates how difficult regulations based on safe scientific thresholds can be for regulators, manufacturers and consumers. This article analyzes the gluten-free regulatory landscape, challenges to defining a safe gluten threshold, and how consumers might need more label information beyond the term "gluten-free." The article includes an overview of international gluten-free regulations, the Food and Drug Administration (FDA) rulemaking process, and issues for consumers.

Devising a Visual Inspection System for Canal Tunnels: Preliminary Studies

NASA Astrophysics Data System (ADS)

Albert, J.-L.; Charbonnier, P.; Chavant, P.; Foucher, P.; Muzet, V.; Prybyla, D.; Perrin, T.; Grussenmeyer, P.; Guillemin, S.; Koehl, M.

2013-07-01

In France, most tunnel canals were built during the 19th and 20th centuries. Maintaining them is not only a matter of heritage preservation but also a question of security. Inspecting tunnel canals is difficult and time consuming, which motivates the development of an image-based surveying system, as already exists for railway or road tunnels. However, while the imaging configuration is similar, referencing the data acquisition device is more difficult in the case of underground waterways, due to the drifts of the inspection barge. In this paper, we introduce the recording prototype we have designed and report the results of the test that were performed in an underground waterway, Niderviller's tunnel, to assess the feasibility of the system. In particular, we give details on the imaging system design. We also analyze the pros and cons of each location method, in terms of costs, practicability, computational burden and accuracy.

Farm accidents and injuries among farm families and workers. A pilot study.

PubMed

Cummings, P H

1991-09-01

Farm accident facts traditionally have been difficult to collect because of the wide array of farm family and non-family involvement in farming practices. Areas commonly involved in farm related accidents include farm machinery, tractor overturns, farm animals, farm trucks, hand and power tools, household items, chemicals, and garden equipment. Two purposes of this descriptive study were to examine, over a 1 year period, the demographic features and types, severity, and mechanisms of injury among farm families and their workers in a representative county in South Carolina, and to develop a two part mail-out questionnaire for data collection relative to farm work related accidents. The researcher concluded that farm accidents are sparsely researched; that traditional data collection methods are difficult, expensive, and time consuming; and that mail-out questionnaires are not a very effective method of collecting data relative to farm accidents, since farmers proved very reluctant to report accidents.

The efficacy of short-term clobetasol lotion in the treatment of scalp psoriasis.

PubMed

Rajabi-Estarabadi, Ali; Hasanzadeh, Hournaz; Taheri, Arash; Feldman, Steven R; Firooz, Alireza

2018-03-01

Scalp psoriasis can have a considerable impact on patients' quality of life and is considered difficult to treat. Treatment failure may, however, be due to poor adherence, as application of topical treatments to hair bearing areas is difficult and time consuming and also poor communication between physician and patient. To assess the efficacy of short-term treatment of scalp psoriasis with topical clobetasol lotion. Twelve patients with mild to severe scalp psoriasis were recruited for this study. Patients applied clobetasol 0.05% lotion twice daily for seven days. They were followed up with phone calls three days after starting the treatment. Skin hydration, transepidermal water loss (TEWL) and skin erythema were assessed noninvasively at baseline and end of study. One week after treatment, median PSI score decreased significantly (p = .002). There was also a significant decrease in median TEWL (p = .012) and increase in skin hydration one week after treatment (p = .010). Eighty three percent of patients were satisfied with treatment result and felt convenient with applying clobetasol lotion. Lack of a long-term follow-up. Psoriasis is a long-term disease, and improving adherence in the short time could improve patient's adherence to treatment in long time.

3D Printing of Biomolecular Models for Research and Pedagogy

PubMed Central

Da Veiga Beltrame, Eduardo; Tyrwhitt-Drake, James; Roy, Ian; Shalaby, Raed; Suckale, Jakob; Pomeranz Krummel, Daniel

2017-01-01

The construction of physical three-dimensional (3D) models of biomolecules can uniquely contribute to the study of the structure-function relationship. 3D structures are most often perceived using the two-dimensional and exclusively visual medium of the computer screen. Converting digital 3D molecular data into real objects enables information to be perceived through an expanded range of human senses, including direct stereoscopic vision, touch, and interaction. Such tangible models facilitate new insights, enable hypothesis testing, and serve as psychological or sensory anchors for conceptual information about the functions of biomolecules. Recent advances in consumer 3D printing technology enable, for the first time, the cost-effective fabrication of high-quality and scientifically accurate models of biomolecules in a variety of molecular representations. However, the optimization of the virtual model and its printing parameters is difficult and time consuming without detailed guidance. Here, we provide a guide on the digital design and physical fabrication of biomolecule models for research and pedagogy using open source or low-cost software and low-cost 3D printers that use fused filament fabrication technology. PMID:28362403

Modematic: a fast laser beam analyzing system for high power CO2-laser beams

NASA Astrophysics Data System (ADS)

Olsen, Flemming O.; Ulrich, Dan

2003-03-01

The performance of an industrial laser is very much depending upon the characteristics of the laser beam. The ISO standards 11146 and 11154 describing test methods for laser beam parameters have been approved. To implement these methods in industry is difficult and especially for the infrared laser sources, such as the CO2-laser, the availabl analyzing systems are slow, difficult to apply and having limited reliability due to the nature of the detection methods. In an EUREKA-project the goal was defined to develop a laser beam analyzing system dedicated to high power CO2-lasers, which could fulfill the demands for an entire analyzing system, automating the time consuming pre-alignment and beam conditioning work required before a beam mode analyses, automating the analyzing sequences and data analysis required to determine the laser beam caustics and last but not least to deliver reliable close to real time data to the operator. The results of this project work will be described in this paper. The research project has led to the development of the Modematic laser beam analyzer, which is ready for the market.

Role of non-invasive ventilation in difficult-to-wean children with acute neuromuscular disease.

PubMed

Reddy, V G; Nair, M P; Bataclan, F

2004-05-01

Weaning from mechanical ventilation in children could be time-consuming and on many occasions, leads to reintubation with its associate complications. We report two children with acute neuromuscular disease, in whom bi-level positive airway pressure (BiPAP) as a mode of non-invasive ventilation was successfully used to wean the child from ventilators and prevented the need for tracheostomy. Despite the limited number of studies published in the literature suggesting BiPAP as a mode of weaning from mechanical ventilation, the technique when applied correctly seems to be safe and effective in weaning and avoiding tracheostomy.

Negative pressure wound therapy and external fixation device: a simple way to seal the dressing.

PubMed

Bulla, Antonio; Farace, Francesco; Uzel, André-Pierre; Casoli, Vincent

2014-07-01

Negative pressure therapy is widely applied to treat lower limb trauma. However, sealing a negative pressure dressing in the presence of an external fixation device may be difficult and time consuming. Therefore, screws, pins, wires, etc, may preclude the vacuum, preventing the plastic drape to perfectly adhere to the foam. To maintain the vacuum, we tried to prevent air leaking around the screws putting bone wax at the junction between the pins and the plastic drape. This solution, in our hands, avoids air leakage and helps maintain vacuum in a fast and inexpensive way.

Methods for culturing saltwater rotifers (Brachionus plicatilis) for rearing larval zebrafish.

PubMed

Lawrence, Christian; Sanders, Erik; Henry, Eric

2012-09-01

The saltwater rotifer, Brachionus plicatilis, is widely used in the aquaculture industry as a prey item for first-feeding fishes due to its ease of culture, small size, rapid reproductive rate, and amenability to enrichment with nutrients. Despite the distinct advantages of this approach, rotifers have only been sporadically utilized for rearing larval zebrafish, primarily because of the common misconception that maintaining cultures of rotifers is difficult and excessively time-consuming. Here we present simple methods for maintaining continuous cultures of rotifers capable of supporting even the very largest zebrafish aquaculture facility, with minimal investments in materials, time, labor, and space. Examples of the methods' application in one large, existing facility is provided, and troubleshooting of common problems is discussed.

A new method for monitoring the extracellular proteolytic activity of wine yeasts during alcoholic fermentation of grape must.

PubMed

Chasseriaud, Laura; Miot-Sertier, Cécile; Coulon, Joana; Iturmendi, Nerea; Moine, Virginie; Albertin, Warren; Bely, Marina

2015-12-01

The existing methods for testing proteolytic activity are time consuming, quite difficult to perform, and do not allow real-time monitoring. Proteases have attracted considerable interest in winemaking and some yeast species naturally present in grape must, such as Metschnikowia pulcherrima, are capable of expressing this activity. In this study, a new test is proposed for measuring proteolytic activity directly in fermenting grape must, using azocasein, a chromogenic substrate. Several yeast strains were tested and differences in proteolytic activity were observed. Moreover, analysis of grape must proteins in wines revealed that protease secreted by Metschnikowia strains may be active against wine proteins. Copyright © 2015. Published by Elsevier B.V.

The "Consumer Report" version of Earth Science Data Quality description

NASA Astrophysics Data System (ADS)

Vicente, G. A.

2014-12-01

The generation, delivery and access of Earth Observation (EO) data quality information is a difficult problem because it is not uniquely defined, user dependent, difficult to be quantified, handled differently by different teams and perceived differently by data providers and data users. Initiatives such as the International Organization for Standards (ISO) 19115 and 19157 are important steps forward but difficult to implement, too complex and out of reach for the majority of data producers and users. This is because most users only want a quick and intelligible way to compare data sets from different providers to find the ones that best fit their interest. Therefore we need to simplify the problem by focusing on a few relevant quality parameters and develop a common framework to deliver them. This work is intended to tap into the data producers and user's knowledge and expertise on data quality for the development and adoption of a "Consumer Report" version of a "Data Quality Matrix". The goal is to find the most efficient and friendly approach to displays a selected number of quality parameters rated to each product and to target group of users.

The rise of ocean giants: maximum body size in Cenozoic marine mammals as an indicator for productivity in the Pacific and Atlantic Oceans.

PubMed

Pyenson, Nicholas D; Vermeij, Geerat J

2016-07-01

Large consumers have ecological influence disproportionate to their abundance, although this influence in food webs depends directly on productivity. Evolutionary patterns at geologic timescales inform expectations about the relationship between consumers and productivity, but it is very difficult to track productivity through time with direct, quantitative measures. Based on previous work that used the maximum body size of Cenozoic marine invertebrate assemblages as a proxy for benthic productivity, we investigated how the maximum body size of Cenozoic marine mammals, in two feeding guilds, evolved over comparable temporal and geographical scales. First, maximal size in marine herbivores remains mostly stable and occupied by two different groups (desmostylians and sirenians) over separate timeframes in the North Pacific Ocean, while sirenians exclusively dominated this ecological mode in the North Atlantic. Second, mysticete whales, which are the largest Cenozoic consumers in the filter-feeding guild, remained in the same size range until a Mio-Pliocene onset of cetacean gigantism. Both vertebrate guilds achieved very large size only recently, suggesting that different trophic mechanisms promoting gigantism in the oceans have operated in the Cenozoic than in previous eras. © 2016 The Authors.

The problem of choice: From the voluntary way to Affordable Care Act health insurance exchanges.

PubMed

Mulligan, Jessica

2017-05-01

This article takes a genealogical and ethnographic approach to the problem of choice, arguing that what choice means has been reworked several times since health insurance first figured prominently in national debates about health reform. Whereas voluntary choice of doctor and hospital used to be framed as an American right, contemporary choice rhetoric includes consumer choice of insurance plan. Understanding who has deployed choice rhetoric and to what ends helps explain how offering choices has become the common sense justification for defending and preserving the exclusionary health care system in the United States. Four case studies derived from 180 enrollment observations at the Rhode Island health insurance exchange conducted from March 2014-January 2017 and interviews with enrollees show how choice is experienced in this latest iteration of health reform. The Affordable Care Act (ACA) of 2010 created new pathways to insurance coverage in the United States. Insurance exchanges were supposed to unleash the power of consumer decision-making through marketplaces where health plans compete on quality, coverage, and price. Consumers, however, contended with confusing insurance terminology and difficult to navigate websites. The ethnography shows that consumers experienced choice as confusing and overwhelming and did not feel "in charge" of their decisions. Instead, unstable employment, changes in income, existing health needs, and bureaucratic barriers shaped their "choices." Copyright © 2017 Elsevier Ltd. All rights reserved.

Impact of water quality on chlorine demand of corroding copper.

PubMed

Lytle, Darren A; Liggett, Jennifer

2016-04-01

Copper is widely used in drinking water premise plumbing system materials. In buildings such as hospitals, large and complicated plumbing networks make it difficult to maintain good water quality. Sustaining safe disinfectant residuals throughout a building to protect against waterborne pathogens such as Legionella is particularly challenging since copper and other reactive distribution system materials can exert considerable demands. The objective of this work was to evaluate the impact of pH and orthophosphate on the consumption of free chlorine associated with corroding copper pipes over time. A copper test-loop pilot system was used to control test conditions and systematically meet the study objectives. Chlorine consumption trends attributed to abiotic reactions with copper over time were different for each pH condition tested, and the total amount of chlorine consumed over the test runs increased with increasing pH. Orthophosphate eliminated chlorine consumption trends with elapsed time (i.e., chlorine demand was consistent across entire test runs). Orthophosphate also greatly reduced the total amount of chlorine consumed over the test runs. Interestingly, the total amount of chlorine consumed and the consumption rate were not pH dependent when orthophosphate was present. The findings reflect the complex and competing reactions at the copper pipe wall including corrosion, oxidation of Cu(I) minerals and ions, and possible oxidation of Cu(II) minerals, and the change in chlorine species all as a function of pH. The work has practical applications for maintaining chlorine residuals in premise plumbing drinking water systems including large buildings such as hospitals. Published by Elsevier Ltd.

Spatial Modeling for Resources Framework (SMRF): A modular framework for developing spatial forcing data for snow modeling in mountain basins

NASA Astrophysics Data System (ADS)

Havens, Scott; Marks, Danny; Kormos, Patrick; Hedrick, Andrew

2017-12-01

In the Western US and many mountainous regions of the world, critical water resources and climate conditions are difficult to monitor because the observation network is generally very sparse. The critical resource from the mountain snowpack is water flowing into streams and reservoirs that will provide for irrigation, flood control, power generation, and ecosystem services. Water supply forecasting in a rapidly changing climate has become increasingly difficult because of non-stationary conditions. In response, operational water supply managers have begun to move from statistical techniques towards the use of physically based models. As we begin to transition physically based models from research to operational use, we must address the most difficult and time-consuming aspect of model initiation: the need for robust methods to develop and distribute the input forcing data. In this paper, we present a new open source framework, the Spatial Modeling for Resources Framework (SMRF), which automates and simplifies the common forcing data distribution methods. It is computationally efficient and can be implemented for both research and operational applications. We present an example of how SMRF is able to generate all of the forcing data required to a run physically based snow model at 50-100 m resolution over regions of 1000-7000 km2. The approach has been successfully applied in real time and historical applications for both the Boise River Basin in Idaho, USA and the Tuolumne River Basin in California, USA. These applications use meteorological station measurements and numerical weather prediction model outputs as input. SMRF has significantly streamlined the modeling workflow, decreased model set up time from weeks to days, and made near real-time application of a physically based snow model possible.

Algorithmic synthesis using Python compiler

NASA Astrophysics Data System (ADS)

Cieszewski, Radoslaw; Romaniuk, Ryszard; Pozniak, Krzysztof; Linczuk, Maciej

2015-09-01

This paper presents a python to VHDL compiler. The compiler interprets an algorithmic description of a desired behavior written in Python and translate it to VHDL. FPGA combines many benefits of both software and ASIC implementations. Like software, the programmed circuit is flexible, and can be reconfigured over the lifetime of the system. FPGAs have the potential to achieve far greater performance than software as a result of bypassing the fetch-decode-execute operations of traditional processors, and possibly exploiting a greater level of parallelism. This can be achieved by using many computational resources at the same time. Creating parallel programs implemented in FPGAs in pure HDL is difficult and time consuming. Using higher level of abstraction and High-Level Synthesis compiler implementation time can be reduced. The compiler has been implemented using the Python language. This article describes design, implementation and results of created tools.

Systematic tracking, visualizing, and interpreting of consumer feedback for drinking water quality.

PubMed

Dietrich, Andrea M; Phetxumphou, Katherine; Gallagher, Daniel L

2014-12-01

Consumer feedback and complaints provide utilities with useful data about consumer perceptions of aesthetic water quality in the distribution system. This research provides a systematic approach to interpret consumer complaint water quality data provided by four water utilities that recorded consumer complaints, but did not routinely process the data. The utilities tended to write down a myriad of descriptors that were too numerous or contained a variety of spellings so that electronic "harvesting" was not possible and much manual labor was required to categorize the complaints into majors areas, such as suggested by the Drinking Water Taste and Odor Wheel or existing check-sheets. When the consumer complaint data were categorized and visualized using spider (or radar) and run-time plots, major taste, odor, and appearance patterns emerged that clarified the issue and could provide guidance to the utility on the nature and extent of the problem. A caveat is that while humans readily identify visual issues with the water, such as color, cloudiness, or rust, describing specific tastes and odors in drinking water is acknowledged to be much more difficult for humans to achieve without training. This was demonstrated with two utility groups and a group of consumers identifying the odors of orange, 2-methylisoborneol, and dimethyl trisulfide. All three groups readily and succinctly identified the familiar orange odor. The two utility groups were much more able to identify the musty odor of 2-methylisoborneol, which was likely familiar to them from their work with raw and finished water. Dimethyl trisulfide, a garlic-onion odor associated with sulfur compounds in drinking water, was the least familiar to all three groups, although the laboratory staff did best. These results indicate that utility personnel should be tolerant of consumers who can assuredly say the water is different, but cannot describe the problem. Also, it indicates that a T&O program at a utility would benefit from identification of aesthetic issues in water. Copyright © 2014 Elsevier Ltd. All rights reserved.

Prepartum and postpartum nutritional management to optimize fertility in high-yielding dairy cows in confined TMR systems.

PubMed

Drackley, J K; Cardoso, F C

2014-05-01

The 6 to 8-week period centered on parturition, known as the transition or periparturient period, is critical to welfare and profitability of individual cows. Fertility of high-producing cows is compromised by difficult transitions. Deficiencies in either nutritional or non-nutritional management increase risk for periparturient metabolic disorders and infectious diseases, which decrease subsequent fertility. A primary factor impeding fertility is the extent of negative energy balance (NEB) early postpartum, which may inhibit timing of first ovulation, return to cyclicity, and oocyte quality. In particular, pronounced NEB during the first 10 days to 2 weeks (the time of greatest occurrence of health problems) is critical for later reproductive efficiency. Avoiding over-conditioning and preventing cows from over-consuming energy relative to their requirements in late gestation result in higher dry matter intake (DMI) and less NEB after calving. A pooled statistical analysis of previous studies in our group showed that days to pregnancy are decreased (by 10 days) by controlling energy intake to near requirements of cows before calving compared with allowing cows to over-consume energy. To control energy intake, total mixed rations (TMR) must be well balanced for metabolizable protein, minerals and vitamins yet limit total DM consumed, and cows must uniformly consume the TMR without sorting. Dietary management to maintain blood calcium and rumen health around and after calving also are important. Opportunities may exist to further improve energy status in fresh cows. Recent research to manipulate the glucogenic to lipogenic balance and the essential fatty acid content of tissues are intriguing. High-producing cows that adapt successfully to lactation can have high reproductive efficiency, and nutritional management of the transition period both pre- and post-calving must facilitate that adaptation.

Evaluation of a comprehensive employee wellness program at an organization with a consumer-directed health plan.

PubMed

Burton, Wayne N; Chen, Chin-Yu; Li, Xingquan; Schultz, Alyssa B; Kasiarz, David; Edington, Dee W

2014-04-01

Consumer-directed health plans (CDHPs) are popular among employers in the United States. This study examined an employee wellness program and its association with employee health in an organization that recently initiated a CDHP. This retrospective observational analysis compared the health risks, employer-paid health care costs, and short-term disability absences of employees of a large financial services corporation from 2009 to 2010. The two-time health risk appraisal participants had a significant improvement in the percentage of employees in the overall low-risk category. The average annual employer-paid medical and pharmacy costs did not significantly change. For employees who improved their health risk category, there was a commensurate change in costs and absences. In a difficult economic climate, this organization began a health promotion program for employees as well as a new CDHP benefit structure. No short-term reduction in health care usage or overall health status was observed.

Quantitative carbon detector for enhanced detection of molecules in foods, pharmaceuticals, cosmetics, flavors, and fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beach, Connor A.; Krumm, Christoph; Spanjers, Charles S.

Analysis of trace compounds, such as pesticides and other contaminants, within consumer products, fuels, and the environment requires quantification of increasingly complex mixtures of difficult-to-quantify compounds.

Inventory Management for Irregular Shipment of Goods in Distribution Centre

NASA Astrophysics Data System (ADS)

Takeda, Hitoshi; Kitaoka, Masatoshi; Usuki, Jun

2016-01-01

The shipping amount of commodity goods (Foods, confectionery, dairy products, such as public cosmetic pharmaceutical products) changes irregularly at the distribution center dealing with the general consumer goods. Because the shipment time and the amount of the shipment are irregular, the demand forecast becomes very difficult. For this, the inventory control becomes difficult, too. It cannot be applied to the shipment of the commodity by the conventional inventory control methods. This paper proposes the method for inventory control by cumulative flow curve method. It proposed the method of deciding the order quantity of the inventory control by the cumulative flow curve. Here, it proposes three methods. 1) Power method,2) Polynomial method and 3)Revised Holt's linear method that forecasts data with trends that is a kind of exponential smoothing method. This paper compares the economics of the conventional method, which is managed by the experienced and three new proposed methods. And, the effectiveness of the proposal method is verified from the numerical calculations.

Mid-Cretaceous charred fossil flowers reveal direct observation of arthropod feeding strategies

PubMed Central

Hartkopf-Fröder, Christoph; Rust, Jes; Wappler, Torsten; Friis, Else Marie; Viehofen, Agnes

2012-01-01

Although plant–arthropod relationships underpin the dramatic rise in diversity and ecological dominance of flowering plants and their associated arthropods, direct observations of such interactions in the fossil record are rare, as these ephemeral moments are difficult to preserve. Three-dimensionally preserved charred remains of Chloranthistemon flowers from the Late Albian to Early Cenomanian of Germany preserve scales of mosquitoes and an oribatid mite with mouthparts inserted into the pollen sac. Mosquitoes, which today are frequent nectar feeders, and the mite were feeding on pollen at the time wildfire consumed the flowers. These findings document directly arthropod feeding strategies and their role in decomposition. PMID:21900310

[Medical image elastic registration smoothed by unconstrained optimized thin-plate spline].

PubMed

Zhang, Yu; Li, Shuxiang; Chen, Wufan; Liu, Zhexing

2003-12-01

Elastic registration of medical image is an important subject in medical image processing. Previous work has concentrated on selecting the corresponding landmarks manually and then using thin-plate spline interpolating to gain the elastic transformation. However, the landmarks extraction is always prone to error, which will influence the registration results. Localizing the landmarks manually is also difficult and time-consuming. We the optimization theory to improve the thin-plate spline interpolation, and based on it, used an automatic method to extract the landmarks. Combining these two steps, we have proposed an automatic, exact and robust registration method and have gained satisfactory registration results.

A new laparoscopic-assisted hepatectomy (LAH) utilizing radiofrequency ablation and high-frequency electrocautery.

PubMed

Miyazawa, Mitsuo; Torii, Takahiro; Toshimitsu, Yasuko; Okada, Katsuya; Ogawa, Nobuji; Shinozuka, Nozomi; Koyama, Isamu

2006-01-01

Compared to tumors located at the edge of the liver, tumors located directly on the liver surface are often difficult to resect, especially when the organ is cirrhotic. To remove tumors at this location, our group has developed a round high-frequency electrosurgical knife that allows hemispherical resection of the liver tissue. This study describes a new laparoscopic-assisted hepatectomy utilizing radiofrequency ablation of the tissue surrounding the tumor and high-frequency electrocautery. When compared with the laparoscopic hepatectomy, this new procedure seems to offer a safer, more effective, and less time-consuming means of resecting tumors on the liver surface. (c) 2005 Wiley-Liss, Inc.

Kernel-Based Learning for Domain-Specific Relation Extraction

NASA Astrophysics Data System (ADS)

Basili, Roberto; Giannone, Cristina; Del Vescovo, Chiara; Moschitti, Alessandro; Naggar, Paolo

In a specific process of business intelligence, i.e. investigation on organized crime, empirical language processing technologies can play a crucial role. The analysis of transcriptions on investigative activities, such as police interrogatories, for the recognition and storage of complex relations among people and locations is a very difficult and time consuming task, ultimately based on pools of experts. We discuss here an inductive relation extraction platform that opens the way to much cheaper and consistent workflows. The presented empirical investigation shows that accurate results, comparable to the expert teams, can be achieved, and parametrization allows to fine tune the system behavior for fitting domain-specific requirements.

Consumerism as a branding opportunity.

PubMed

Treash, M; Adams, R

1998-01-01

Managing a customer portfolio at the individual level is the most difficult and most promising endeavor. An individual level consumer portfolio does not mean creating marketing materials and advertising campaigns customized for every member of your health plan. What it does mean is developing segmentation models based on consumer preferences extracted directly from your members, not socioeconomic or other demographic models. The most important information to extract is perceptions on how much and what kind of value members want from the organization.

Readability of ASPS and ASAPS educational web sites: an analysis of consumer impact.

PubMed

Aliu, Oluseyi; Chung, Kevin C

2010-04-01

Patients use the Internet to educate themselves about health-related topics, and learning about plastic surgery is a common activity for enthusiastic consumers in the United States. How to educate consumers regarding plastic surgical procedures is a continued concern for plastic surgeons when faced with the growing portion of the American population having relatively low health care literacy. The usefulness of health-related education materials on the Internet depends largely on their comprehensibility and understandability for all who visit the Web sites. The authors studied the readability of patient education materials related to common plastic surgery procedures from the American Society of Plastic Surgeons (ASPS) and the American Society for Aesthetic Plastic Surgery (ASAPS) Web sites and compared them with materials on similar topics from 10 popular health information-providing sites. The authors found that all analyzed documents on the ASPS and ASAPS Web sites targeted to the consumers were rated to be more difficult than the recommended reading grade level for most American adults, and these documents were consistently among the most difficult to read when compared with the other health information Web sites. The Internet is an increasingly popular avenue for patients to educate themselves about plastic surgery procedures. Patient education material provided on ASPS and ASAPS Web sites should be written at recommended reading grade levels to ensure that it is readable and comprehensible to the targeted audience.

ERP implementation in hospitals: a case study.

PubMed

Agarwal, Divya; Garg, Poonam

2012-01-01

In a competitive healthcare sector, hospitals have to focus on their processes in order to deliver high-quality care while at the same time reducing costs. Many hospitals have decided to adopt one or another Enterprise Resource Planning (ERP) system to improve their businesses, but implementing an ERP system can be a demanding endeavour. The systems are so difficult to implement that some are successful; many have failed, causing multimillion dollar losses. The challenge of ERP solutions lie in implementation because they are complex, time consuming and expensive too. This paper describes the various process workflows and phases of ERP implementation at Fortis Hospital Cunningham Road, Bangalore, India. This knowledge will provide valuable insights for the researchers and practitioners to understand the different process workflows and to make informed decisions when implementing ERP in any hospital.

Online purchasing creates opportunities to lower the life cycle carbon footprints of consumer products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Isley, Steven C.; Stern, Paul C.; Carmichael, Scott P.

A major barrier to transitions to environmental sustainability is that consumers lack information about the full environmental footprints of their purchases. Sellers' incentives do not support reducing the footprints unless customers have such information and are willing to act on it. We explore the potential of modern information technology to lower this barrier by enabling firms to inform customers of products' environmental footprints at the point of purchase and easily offset consumers' contributions through bundled purchases of carbon offsets. Using online stated choice experiments, we evaluated the effectiveness of several inexpensive features that firms in four industries could implement withmore » existing online user interfaces for consumers. These examples illustrate the potential for firms to lower their overall carbon footprints while improving customer satisfaction by lowering the 'soft costs' to consumers of pro-environmental choices. Lastly, opportunities such as these likely exist wherever firms possess environmentally relevant data not accessible to consumers or when transaction costs make pro-environmental action difficult.« less

Online purchasing creates opportunities to lower the life cycle carbon footprints of consumer products

DOE PAGES

Isley, Steven C.; Stern, Paul C.; Carmichael, Scott P.; ...

2016-08-30

A major barrier to transitions to environmental sustainability is that consumers lack information about the full environmental footprints of their purchases. Sellers' incentives do not support reducing the footprints unless customers have such information and are willing to act on it. We explore the potential of modern information technology to lower this barrier by enabling firms to inform customers of products' environmental footprints at the point of purchase and easily offset consumers' contributions through bundled purchases of carbon offsets. Using online stated choice experiments, we evaluated the effectiveness of several inexpensive features that firms in four industries could implement withmore » existing online user interfaces for consumers. These examples illustrate the potential for firms to lower their overall carbon footprints while improving customer satisfaction by lowering the 'soft costs' to consumers of pro-environmental choices. Lastly, opportunities such as these likely exist wherever firms possess environmentally relevant data not accessible to consumers or when transaction costs make pro-environmental action difficult.« less

How report cards on physicians, physician groups, and hospitals can have greater impact on consumer choices.

PubMed

Sinaiko, Anna D; Eastman, Diana; Rosenthal, Meredith B

2012-03-01

Public report cards with quality and cost information on physicians, physician groups, and hospital providers have proliferated in recent years. However, many of these report cards are difficult for consumers to interpret and have had little impact on the provider choices consumers are making. To gain a more focused understanding of why these reports cards have not been more successful and what improvements could be made, we interviewed experts and surveyed registrants at the March 2011 AHRQ National Summit on Public Reporting for Consumers in Health Care. We found broad agreement that public reporting has been disconnected from consumer decisions about providers because of weaknesses in report card content, design, and accessibility. Policy makers have an opportunity to change the landscape of public reporting by taking advantage of advances in measurement, data collection, and information technology to deliver a more consumer-centered report card. Overcoming the constraint of limited public funding, and achieving the acceptance of providers, is critical to realizing future success.

Online purchasing creates opportunities to lower the life cycle carbon footprints of consumer products.

PubMed

Isley, Steven C; Stern, Paul C; Carmichael, Scott P; Joseph, Karun M; Arent, Douglas J

2016-08-30

A major barrier to transitions to environmental sustainability is that consumers lack information about the full environmental footprints of their purchases. Sellers' incentives do not support reducing the footprints unless customers have such information and are willing to act on it. We explore the potential of modern information technology to lower this barrier by enabling firms to inform customers of products' environmental footprints at the point of purchase and easily offset consumers' contributions through bundled purchases of carbon offsets. Using online stated choice experiments, we evaluated the effectiveness of several inexpensive features that firms in four industries could implement with existing online user interfaces for consumers. These examples illustrate the potential for firms to lower their overall carbon footprints while improving customer satisfaction by lowering the "soft costs" to consumers of proenvironmental choices. Opportunities such as these likely exist wherever firms possess environmentally relevant data not accessible to consumers or when transaction costs make proenvironmental action difficult.

IgE-blocking therapy for difficult-to-treat asthma: a brief review.

PubMed

Marshall, Gailen D; Sorkness, Christine A

2004-03-01

To review the characteristics of difficult-to-treat asthma and describe patients who may benefit from therapy with the recently approved humanized monoclonal antiimmunoglobulin E (IgE) antibody, omalizumab. Up to 20 percent of patients have difficult-to-treat asthma. These patients consume a disproportionate share of asthma care resources. Clinical and economic outcomes can be improved via improved self-management, increased adherence to prescribed therapy, and better compliance to national asthma treatment guidelines. These patients also may benefit from therapies that directly target mechanisms responsible for persistent airway inflammation and elicit favorable clinical responses. Effective asthma control remains difficult in a small cohort of patients with persistent, severe airway inflammation. Management strategies that improve asthma control and reduce exacerbations can improve clinical outcomes and minimize health care resource utilization.

Towards an automated intelligence product generation capability

NASA Astrophysics Data System (ADS)

Smith, Alison M.; Hawes, Timothy W.; Nolan, James J.

2015-05-01

Creating intelligence information products is a time consuming and difficult process for analysts faced with identifying key pieces of information relevant to a complex set of information requirements. Complicating matters, these key pieces of information exist in multiple modalities scattered across data stores, buried in huge volumes of data. This results in the current predicament analysts find themselves; information retrieval and management consumes huge amounts of time that could be better spent performing analysis. The persistent growth in data accumulation rates will only increase the amount of time spent on these tasks without a significant advance in automated solutions for information product generation. We present a product generation tool, Automated PrOduct Generation and Enrichment (APOGEE), which aims to automate the information product creation process in order to shift the bulk of the analysts' effort from data discovery and management to analysis. APOGEE discovers relevant text, imagery, video, and audio for inclusion in information products using semantic and statistical models of unstructured content. APOGEEs mixed-initiative interface, supported by highly responsive backend mechanisms, allows analysts to dynamically control the product generation process ensuring a maximally relevant result. The combination of these capabilities results in significant reductions in the time it takes analysts to produce information products while helping to increase the overall coverage. Through evaluation with a domain expert, APOGEE has been shown the potential to cut down the time for product generation by 20x. The result is a flexible end-to-end system that can be rapidly deployed in new operational settings.

J-tube technique for double-j stent insertion during laparoscopic upper urinary tract surgical procedures.

PubMed

Kim, Hyung Suk; Lee, Byung Ki; Jung, Jin-Woo; Lee, Jung Keun; Byun, Seok-Soo; Lee, Sang Eun; Jeong, Chang Wook

2014-11-01

Double-J stent insertion has been generally performed during laparoscopic upper urinary tract (UUT) surgical procedures to prevent transient urinary tract obstruction and postoperative flank pain from ureteral edema and blood clots. Several restrictive conditions that make this procedure difficult and time consuming, however, include the coiled distal ends of the flexible Double-J stent and the limited bending angle of the laparoscopic instruments. To overcome these limitations, we devised a Double-J stent insertion method using the new J-tube technique. Between July 2011 and May 2013, Double-J stents were inserted using the J-tube technique in 33 patients who underwent a laparoscopic UUT surgical procedure by a single surgeon. The mean stent placement time was 4.8±2.7 minutes, and there were no intraoperative complications. In conclusion, the J-tube technique is a safe and time-saving method for Double-J stent insertion during laparoscopic surgical procedures.

Spacecraft command verification: The AI solution

NASA Technical Reports Server (NTRS)

Fesq, Lorraine M.; Stephan, Amy; Smith, Brian K.

1990-01-01

Recently, a knowledge-based approach was used to develop a system called the Command Constraint Checker (CCC) for TRW. CCC was created to automate the process of verifying spacecraft command sequences. To check command files by hand for timing and sequencing errors is a time-consuming and error-prone task. Conventional software solutions were rejected when it was estimated that it would require 36 man-months to build an automated tool to check constraints by conventional methods. Using rule-based representation to model the various timing and sequencing constraints of the spacecraft, CCC was developed and tested in only three months. By applying artificial intelligence techniques, CCC designers were able to demonstrate the viability of AI as a tool to transform difficult problems into easily managed tasks. The design considerations used in developing CCC are discussed and the potential impact of this system on future satellite programs is examined.

Monitoring the availability of healthy and unhealthy foods and non-alcoholic beverages in community and consumer retail food environments globally.

PubMed

Ni Mhurchu, C; Vandevijvere, S; Waterlander, W; Thornton, L E; Kelly, B; Cameron, A J; Snowdon, W; Swinburn, B

2013-10-01

Retail food environments are increasingly considered influential in determining dietary behaviours and health outcomes. We reviewed the available evidence on associations between community (type, availability and accessibility of food outlets) and consumer (product availability, prices, promotions and nutritional quality within stores) food environments and dietary outcomes in order to develop an evidence-based framework for monitoring the availability of healthy and unhealthy foods and non-alcoholic beverages in retail food environments. Current evidence is suggestive of an association between community and consumer food environments and dietary outcomes; however, substantial heterogeneity in study designs, methods and measurement tools makes it difficult to draw firm conclusions. The use of standardized tools to monitor local food environments within and across countries may help to validate this relationship. We propose a step-wise framework to monitor and benchmark community and consumer retail food environments that can be used to assess density of healthy and unhealthy food outlets; measure proximity of healthy and unhealthy food outlets to homes/schools; evaluate availability of healthy and unhealthy foods in-store; compare food environments over time and between regions and countries; evaluate compliance with local policies, guidelines or voluntary codes of practice; and determine the impact of changes to retail food environments on health outcomes, such as obesity. © 2013 The Authors. Obesity Reviews published by John Wiley & Sons Ltd on behalf of the International Association for the Study of Obesity.

Overweight adolescents eat what? And when? Analysis of consumption patterns to guide dietary message development for intervention.

PubMed

Smith, K L; Straker, L M; Kerr, D A; Smith, A J

2015-02-01

Little is known about overweight adolescent dietary consumption patterns, with challenges to collecting meaningful data making it difficult to develop targeted obesity interventions. The present study aimed to examine the timing and consumption of fruit, vegetables and junk food by time of the day and day of the week. Overweight adolescents (n = 61), aged 12-16 years, completed 3-day food records. Negative binomial and binary logistic regression using generalised estimating equations were used to compare the amount and likelihood of the consumption of each food group between time periods. Overweight adolescent girls were more likely to eat fruit on weekdays than weekends [odds ratio (OR) = 5.0. P < 0.001], as were boys (OR = 2.5, P = 0.034). Adolescents consumed more fruit at school than other meals [girls: incident rate ratio (IRR) = 7.5, P < 0.001; boys: IRR = 4.0, P = 0.050]. Weekday dinner was the meal where girls were most likely to consume vegetables (OR = 3.0, P = 0.009) and when boys consumed the most vegetables (IRR = 30.9, P = 0.006). Fast food consumption was most likely for girls at dinner on the weekend (OR = 9.6, P = 0.042), whereas fast food intake for boys increased overall on the weekend (IRR = 3.6, P = 0.001). Intake of 'other junk' (e.g. crisps) peaked during school hours for girls (IRR = 7.2, P < 0.001) and sugar-sweetened beverage consumption increased for boys on the weekend (IRR = 3.3, P = 0.001). Overall, trends in fruit intake showed opposing times for high and low consumption compared to vegetable intake. These results represent the next step in using time of day and day of week consumption patterns to develop targeted, evidence-based dietary messages for interventions in overweight adolescents. © 2014 The British Dietetic Association Ltd.

The Proliferation of Unmanned Aerial Vehicles: Terrorist Use, Capability, and Strategic Implications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ball, Ryan Jokl

There has been unparalleled proliferation and technological advancement of consumer unmanned aerial vehicles (UAVs) across the globe in the past several years. As witnessed over the course of insurgency tactics, it is difficult to restrict terrorists from using widely available technology they perceive as advantageous to their overall strategy. Through a review of the characteristics, consumer market landscape, tactics, and countertactics, as well as operational use of consumer-grade UAVs, this open-source report seeks to provide an introductory understanding of the terrorist-UAV landscape, as well as insights into present and future capabilities. The caveat is evaluating a developing technology haphazardly usedmore » by terrorists in asymmetric conflicts.« less

Communicating information about “what not to do” to consumers

PubMed Central

2013-01-01

Background Americans devote more resources to health care than any other developed country, and yet they have worse health outcomes and less access. This creates a perfect set of opportunities for Consumer Reports, a nonprofit consumer advocacy and multimedia organization known for its focus on individual consumers in markets where significant amounts of misinformation is in play. Consumer Reports uses comparisons/ratings based on the best available data to “level” the market playing field. While our early efforts to inform consumers of overuse and underuse in health care were successful, we sensed there were opportunities to have greater impact. Over a 5-year period, with the help of many partners, Consumer Reports learned more about how to communicate “what not to do” to consumers, ultimately enhancing the effectiveness of this difficult message. Analysis Consumer Reports began an in-depth examination of the overuse of health services in 2010 with an exploratory review of the cognitive psychology literature. Lessons learned from this review were used in the presentation of subsequent ratings of heart disease and cancer screening tests. Surveys showed surprising gaps in the prevention/screening knowledge of healthy, low-risk Consumer Reports subscribers aged 40 to 60 years. Of these subscribers, 44% reported engaging in heart screening tests that received the lowest ratings from the U.S. Preventive Services Task Force and from Consumer Reports. At the same time professional societies and the ABIM (American Board of Internal Medicine) Foundation created Choosing Wisely®, a campaign focused on identifying lists of health tests and treatments not to do. Consumer Reports joined the Choosing Wisely campaign as the consumer “translator” and organizer of a network of consumer organizations with access to tens of millions of consumers. Over the past year, Consumer Reports has conducted multiple qualitative evaluations of content related to overuse of health services. Ratings of cancer screening tests were released in 2013 in an article readers reported as one of the most heavily read articles in the magazine’s recent history. Conclusions Telling consumers that more is not better is not a popular or easy message to deliver. The message is most likely to be “sticky” but is best received if it comes from trusted sources (e.g., physicians), focuses on safety when justified, is communicated in plain language, and uses both mass media and individual consumer approaches. Changing the culture of health care in an era of health reform is an essential part of the transformation needed if we are to allocate finite resources fairly in hopefully fair markets while assuring that better quality products and services at lower prices dominate. PMID:24565077

MEASURING DIETARY EXPOSURE OF YOUNG CHILDREN

EPA Science Inventory

Young children do not consume foods in a structured manner. Their foods contact surfaces (hands, floors, eating surfaces, etc.) that may be contaminated while they are eating them. Thus, dietary exposures of young children are difficult to accurately assess or measure. A recen...

When do fat taxes increase consumer welfare?

PubMed

Lusk, Jayson L; Schroeter, Christiane

2012-11-01

Previous analyses of fat taxes have generally worked within an empirical framework in which it is difficult to determine whether consumers benefit from the policy. This note outlines on simple means to determine whether consumers benefit from a fat tax by comparing the ratio of expenditures on the taxed good to the weight effect of the tax against the individual's willingness to pay for a one-pound weight reduction. Our empirical calculations suggest that an individual would have to be willing to pay about $1500 to reduce weight by one pound for a tax on sugary beverages to be welfare enhancing. The results suggest either that a soda tax is very unlikely to increase individual consumer welfare or that the policy must be justified on some other grounds that abandon standard rationality assumptions. Copyright © 2011 John Wiley & Sons, Ltd.

Readability of written medicine information materials in Arabic language: expert and consumer evaluation.

PubMed

Al Aqeel, Sinaa; Abanmy, Norah; Aldayel, Abeer; Al-Khalifa, Hend; Al-Yahya, Maha; Diab, Mona

2018-02-27

Written Medicine Information (WMI) is one of the sources that patients use to obtain information concerning medicine. This paper aims to assess the readability of two types of WMIs in Arabic language based on vocabulary use and sentence structure using a panel of experts and consumers. This is a descriptive study. Two different types of materials, including the online text from King Abdullah Bin Abdulaziz Arabic Health Encyclopaedia (KAAHE) and medication leaflets submitted by the manufacturers to the Saudi Food and Drug Authority (SFDA) were evaluated. We selected a group of sentences from each WMI. The readability was assessed by experts (n = 5) and consumers (n = 5). The sentence readability of each measured using a specific criteria and rated as 1 = easy, 2 = intermediate, or 3 = difficult. A total of 4476 sentences (SFDA 2231; KAHEE 2245) extracted from websites or patient information leaflets on 50 medications and evaluated. The majority of the vocabulary and sentence structure was considered easy by both expert (SFDA: 68%; KAAHE: 76%) and consumer (SFDA: 76%; KAAHE: 84%) groups. The sentences with difficult or intermediate vocabulary and sentence structure are derived primarily from the precautions and side effects sections. The SFDA and KAAHE WMIs are easy to read and understand as judged by our study sample. However; there is room for improvement, especially in sections related to the side effects and precautions.

Condom makers jockey for position in barrier warfare.

PubMed

1995-01-01

U.S. condom manufacturers are receiving competition from high quality Japanese products. However, the sale of a plastic polyurethane condom by U.S. manufacturer, London International, could potentially outsell Japanese ultra-thin condoms. The polyurethane products can be made at a uniform thinness, resulting in a more sensitive condom. Industry analysts are not sure about the impact of a plastic condom. Some feel that even if they prove to be safer than latex condoms, polyurethane condoms will have a difficult time competing against established brands. Others feel that if consumer response is positive, the potential profits provide a strong incentive for companies to invest in the efficacy studies and marketing of a polyurethane product.

Tools and Data Services from the NASA Earth Satellite Observations for Remote Sensing Commercial Applications

NASA Technical Reports Server (NTRS)

Vicente, Gilberto

2005-01-01

Several commercial applications of remote sensing data, such as water resources management, environmental monitoring, climate prediction, agriculture, forestry, preparation for and migration of extreme weather events, require access to vast amounts of archived high quality data, software tools and services for data manipulation and information extraction. These on the other hand require gaining detailed understanding of the data's internal structure and physical implementation of data reduction, combination and data product production. The time-consuming task must be undertaken before the core investigation can begin and is an especially difficult challenge when science objectives require users to deal with large multi-sensor data sets of different formats, structures, and resolutions.

Internal combustion engine

DOEpatents

Baker, Quentin A.; Mecredy, Henry E.; O'Neal, Glenn B.

1991-01-01

An improved engine is provided that more efficiently consumes difficult fuels such as coal slurries or powdered coal. The engine includes a precombustion chamber having a portion thereof formed by an ignition plug. The precombustion chamber is arranged so that when the piston is proximate the head, the precombustion chamber is sealed from the main cylinder or the main combustion chamber and when the piston is remote from the head, the precombustion chamber and main combustion chamber are in communication. The time for burning of fuel in the precombustion chamber can be regulated by the distance required to move the piston from the top dead center position to the position wherein the precombustion chamber and main combustion chamber are in communication.

Philosophical origins of the social rate of discount in cost-benefit analysis.

PubMed

Robinson, J C

1990-01-01

The social rate of discount--that is, the way decision makers today evaluate future consequences of collective activity--raises difficult issues of intergenerational justice. When benefits are discounted at the present rate the United States government requires, serious efforts to promote public health over the long term will fail cost-benefit tests. No consensus exists among theorists to establish fair rates; philosophers support discounting with economic arguments that economists reject, while economists no less paradoxically support the concept using philosophical arguments that philosophers disavow. A new emphasis on the role of consumers' and citizens' time preferences, however, will keep open rather than close debates on the social discount rate.

CLIPS application user interface for the PC

NASA Technical Reports Server (NTRS)

Jenkins, Jim; Holbrook, Rebecca; Shewhart, Mark; Crouse, Joey; Yarost, Stuart

1991-01-01

The majority of applications that utilize expert system development programs for their knowledge representation and inferencing capability require some form of interface with the end user. This interface is more than likely an interaction through the computer screen. When building an application the user interface can prove to be the most difficult and time consuming aspect to program. Commercial products currently exist which address this issue. To keep pace C Language Integrated Production System (CLIPS) will need to find a solution for their lack of an easy to use Application User Interface (AUI). This paper represents a survey of the DoD CLIPS' user community and provides the backbone of a possible solution.

ATE accomplishes receiver specification testing with increased speed and throughput

NASA Astrophysics Data System (ADS)

Moser, S. A.

1982-12-01

The use of automatic test equipment (ATE) for receiver specifications testing can result in a 90-95% reduction of test time, with a corresponding reduction of labor costs due both to the reduction of personnel numbers and a simplification of tasks that permits less skilled personnel to be employed. These benefits free high-level technicians for more challenging system management assignments. Accuracy and repeatability also improve with the adoption of ATE, since no possibility of human error can be introduced into the readings that are taken by the system. A massive and expensive software design and development effort is identified as the most difficult aspect of ATE implementation, since programming is both time-consuming and labor intensive. An attempt is therefore made by system manufacturers to conduct an integrated development program for both ATE system hardware and software.

Titian: Data Provenance Support in Spark

PubMed Central

Interlandi, Matteo; Shah, Kshitij; Tetali, Sai Deep; Gulzar, Muhammad Ali; Yoo, Seunghyun; Kim, Miryung; Millstein, Todd; Condie, Tyson

2015-01-01

Debugging data processing logic in Data-Intensive Scalable Computing (DISC) systems is a difficult and time consuming effort. Today’s DISC systems offer very little tooling for debugging programs, and as a result programmers spend countless hours collecting evidence (e.g., from log files) and performing trial and error debugging. To aid this effort, we built Titian, a library that enables data provenance—tracking data through transformations—in Apache Spark. Data scientists using the Titian Spark extension will be able to quickly identify the input data at the root cause of a potential bug or outlier result. Titian is built directly into the Spark platform and offers data provenance support at interactive speeds—orders-of-magnitude faster than alternative solutions—while minimally impacting Spark job performance; observed overheads for capturing data lineage rarely exceed 30% above the baseline job execution time. PMID:26726305

High-performance metadata indexing and search in petascale data storage systems

NASA Astrophysics Data System (ADS)

Leung, A. W.; Shao, M.; Bisson, T.; Pasupathy, S.; Miller, E. L.

2008-07-01

Large-scale storage systems used for scientific applications can store petabytes of data and billions of files, making the organization and management of data in these systems a difficult, time-consuming task. The ability to search file metadata in a storage system can address this problem by allowing scientists to quickly navigate experiment data and code while allowing storage administrators to gather the information they need to properly manage the system. In this paper, we present Spyglass, a file metadata search system that achieves scalability by exploiting storage system properties, providing the scalability that existing file metadata search tools lack. In doing so, Spyglass can achieve search performance up to several thousand times faster than existing database solutions. We show that Spyglass enables important functionality that can aid data management for scientists and storage administrators.

Management characteristics of grassfed beef operations in the northeast

USDA-ARS?s Scientific Manuscript database

Much information is being circulated on resource use, environmental impact, and overall sustainability of beef, but finding scientifically sound information is difficult. In an effort to address consumer concerns, a comprehensive analysis is being conducted across the beef industry. As a significant...

Resurrecting Letters of Marque and Reprisal to Address Modern Threats

DTIC Science & Technology

2013-03-01

history 4 and economics. Unfortunately, bringing maritime pirates and cyber criminals to justice has proven difficult under current norms of... cyber criminals have cost companies and consumers hundreds of millions of dollars and valuable intellectual property.79 The National Security Strategy

78 FR 22922 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-17

...-consuming applications annually, 4 applications of medium difficulty, and 10 of the least difficult... the exemptive order application process, including preparation and revision of an application and... the costs required to prepare other more complex and novel applications. See also Political...

Development of a Double Glass Mounting Method Using Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) and its Evaluation for Permanent Mounting of Small Nematodes.

PubMed

Zahabiun, Farzaneh; Sadjjadi, Seyed Mahmoud; Esfandiari, Farideh

2015-01-01

Permanent slide preparation of nematodes especially small ones is time consuming, difficult and they become scarious margins. Regarding this problem, a modified double glass mounting method was developed and compared with classic method. A total of 209 nematode samples from human and animal origin were fixed and stained with Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) followed by double glass mounting and classic dehydration method using Canada balsam as their mounting media. The slides were evaluated in different dates and times, more than four years. Different photos were made with different magnification during the evaluation time. The double glass mounting method was stable during this time and comparable with classic method. There were no changes in morphologic structures of nematodes using double glass mounting method with well-defined and clear differentiation between different organs of nematodes in this method. Using this method is cost effective and fast for mounting of small nematodes comparing to classic method.

Development of a Double Glass Mounting Method Using Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) and its Evaluation for Permanent Mounting of Small Nematodes

PubMed Central

ZAHABIUN, Farzaneh; SADJJADI, Seyed Mahmoud; ESFANDIARI, Farideh

2015-01-01

Background: Permanent slide preparation of nematodes especially small ones is time consuming, difficult and they become scarious margins. Regarding this problem, a modified double glass mounting method was developed and compared with classic method. Methods: A total of 209 nematode samples from human and animal origin were fixed and stained with Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) followed by double glass mounting and classic dehydration method using Canada balsam as their mounting media. The slides were evaluated in different dates and times, more than four years. Different photos were made with different magnification during the evaluation time. Results: The double glass mounting method was stable during this time and comparable with classic method. There were no changes in morphologic structures of nematodes using double glass mounting method with well-defined and clear differentiation between different organs of nematodes in this method. Conclusion: Using this method is cost effective and fast for mounting of small nematodes comparing to classic method. PMID:26811729

Online purchasing creates opportunities to lower the life cycle carbon footprints of consumer products

PubMed Central

Isley, Steven C.; Stern, Paul C.; Carmichael, Scott P.; Joseph, Karun M.; Arent, Douglas J.

2016-01-01

A major barrier to transitions to environmental sustainability is that consumers lack information about the full environmental footprints of their purchases. Sellers’ incentives do not support reducing the footprints unless customers have such information and are willing to act on it. We explore the potential of modern information technology to lower this barrier by enabling firms to inform customers of products’ environmental footprints at the point of purchase and easily offset consumers’ contributions through bundled purchases of carbon offsets. Using online stated choice experiments, we evaluated the effectiveness of several inexpensive features that firms in four industries could implement with existing online user interfaces for consumers. These examples illustrate the potential for firms to lower their overall carbon footprints while improving customer satisfaction by lowering the “soft costs” to consumers of proenvironmental choices. Opportunities such as these likely exist wherever firms possess environmentally relevant data not accessible to consumers or when transaction costs make proenvironmental action difficult. PMID:27528670

Impact of water quality on chlorine demand of corroding copper

EPA Pesticide Factsheets

Copper is widely used in drinking water premise plumbing system materials. In buildings such ashospitals, large and complicated plumbing networks make it difficult to maintain good water quality.Sustaining safe disinfectant residuals throughout a building to protect against waterborne pathogenssuch as Legionella is particularly challenging since copper and other reactive distribution system materialscan exert considerable demands. The objective of this work was to evaluate the impact of pH andorthophosphate on the consumption of free chlorine associated with corroding copper pipes over time. Acopper test-loop pilot system was used to control test conditions and systematically meet the studyobjectives. Chlorine consumption trends attributed to abiotic reactions with copper over time weredifferent for each pH condition tested, and the total amount of chlorine consumed over the test runsincreased with increasing pH. Orthophosphate eliminated chlorine consumption trends with elapsedtime (i.e., chlorine demand was consistent across entire test runs). Orthophosphate also greatly reducedthe total amount of chlorine consumed over the test runs. Interestingly, the total amount of chlorineconsumed and the consumption rate were not pH dependent when orthophosphate was present. Thefindings reflect the complex and competing reactions at the copper pipe wall including corrosion,oxidation of Cu(I) minerals and ions, and possible oxidation of Cu(II) minerals, and the change in

Gluten screening of several dietary supplements by immunochromatographic assay.

PubMed

Oancea, Simona; Wagner, Adriana; Cîrstea, Elena; Sima, Mirela

2011-01-01

Celiac disease (CD) is a chronic intestinal disorder of public health concern caused by gluten ingestion in sensitive individuals. Gluten is a protein found not only in gluten-containing food but also as normal component of drugs and dietary supplements. Detection of gluten in dietary supplements is a very important task required for establishing their gluten status, which is highly important for the safety of products consumed by CD and gluten-sensitive patients. In this paper, we investigated the presence of gluten in twenty one common dietary supplements from the national market using the immunochromatographic assay. This visual assay proved to be an efficient rapid tool for gluten screening as an alternative to the ELISA techniques. The results have shown the presence of gluten in 23.8% of the investigated samples (vitamins, minerals, plant extracts, probiotics supplements, lactoferrin, propolis supplements). The results provide information which may contribute to the completion of the existing lists of gluten-free pharmaceuticals. It is known that for CD patients obtaining accurate information about the gluten content of a particular item is a difficult and time-consuming process.

Lévy distribution and long correlation times in supermarket sales

NASA Astrophysics Data System (ADS)

Groot, Robert D.

2005-08-01

Sales data in a commodity market (supermarket sales to consumers) has been analysed by studying the fluctuation spectrum and noise correlations. Three related products (ketchup, mayonnaise and curry sauce) have been analysed. Most noise in sales is caused by promotions, but here we focus on the fluctuations in baseline sales. These characterise the dynamics of the market. Four hitherto unnoticed effects have been found that are difficult to explain from simple econometric models. These effects are: (1) the noise level in baseline sales is much higher than can be expected for uncorrelated sales events; (2) weekly baseline sales differences are distributed according to a broad non-Gaussian function with fat tails; (3) these fluctuations follow a Lévy distribution of exponent α=1.4, similar to financial exchange markets and in stock markets; and (4) this noise is correlated over a period of 10-11 weeks, or shows an apparent power law spectrum. The similarity to stock markets suggests that models developed to describe these markets may be applied to describe the collective behaviour of consumers.

A high-speed linear algebra library with automatic parallelism

NASA Technical Reports Server (NTRS)

Boucher, Michael L.

1994-01-01

Parallel or distributed processing is key to getting highest performance workstations. However, designing and implementing efficient parallel algorithms is difficult and error-prone. It is even more difficult to write code that is both portable to and efficient on many different computers. Finally, it is harder still to satisfy the above requirements and include the reliability and ease of use required of commercial software intended for use in a production environment. As a result, the application of parallel processing technology to commercial software has been extremely small even though there are numerous computationally demanding programs that would significantly benefit from application of parallel processing. This paper describes DSSLIB, which is a library of subroutines that perform many of the time-consuming computations in engineering and scientific software. DSSLIB combines the high efficiency and speed of parallel computation with a serial programming model that eliminates many undesirable side-effects of typical parallel code. The result is a simple way to incorporate the power of parallel processing into commercial software without compromising maintainability, reliability, or ease of use. This gives significant advantages over less powerful non-parallel entries in the market.

Addiction surplus: the add-on margin that makes addictive consumptions difficult to contain.

PubMed

Adams, Peter J; Livingstone, Charles

2015-01-01

Addictive consumptions generate financial surpluses over-and-above non-addictive consumptions because of the excessive consumption of addicted consumers. This add-on margin or 'addiction surplus' provides a powerful incentive for beneficiaries to protect their income by ensuring addicted consumers keep consuming. Not only that, addiction surplus provides the financial base that enables producers to sponsor activities which aim to prevent public health initiatives from reducing consumption. This paper examines the potency of addiction surplus to engage industry, governments and communities in an on-going reliance on addiction surplus. It then explores how neo-liberal constructions of a rational consumer disguise the ethical and exploitative dynamics of addiction surplus by examining ways in which addictive consumptions fail to conform to notions of autonomy and rationality. Four measures are identified to contain the distorting effects of addiction surplus. Copyright © 2014 Elsevier B.V. All rights reserved.

The Use of Protein Markers to Pinpoint Predation Events

USDA-ARS?s Scientific Manuscript database

Identifying the feeding choices and amount of prey consumed by generalist predators is difficult. Often the only evidence of arthropod predation is in the stomach contents of predators. Currently, the state-of-the-art predator stomach content assays include prey-specific enzyme-linked immunosorbent...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haghighat, A.; Sjoden, G.E.; Wagner, J.C.

In the past 10 yr, the Penn State Transport Theory Group (PSTTG) has concentrated its efforts on developing accurate and efficient particle transport codes to address increasing needs for efficient and accurate simulation of nuclear systems. The PSTTG's efforts have primarily focused on shielding applications that are generally treated using multigroup, multidimensional, discrete ordinates (S{sub n}) deterministic and/or statistical Monte Carlo methods. The difficulty with the existing public codes is that they require significant (impractical) computation time for simulation of complex three-dimensional (3-D) problems. For the S{sub n} codes, the large memory requirements are handled through the use of scratchmore » files (i.e., read-from and write-to-disk) that significantly increases the necessary execution time. Further, the lack of flexible features and/or utilities for preparing input and processing output makes these codes difficult to use. The Monte Carlo method becomes impractical because variance reduction (VR) methods have to be used, and normally determination of the necessary parameters for the VR methods is very difficult and time consuming for a complex 3-D problem. For the deterministic method, the authors have developed the 3-D parallel PENTRAN (Parallel Environment Neutral-particle TRANsport) code system that, in addition to a parallel 3-D S{sub n} solver, includes pre- and postprocessing utilities. PENTRAN provides for full phase-space decomposition, memory partitioning, and parallel input/output to provide the capability of solving large problems in a relatively short time. Besides having a modular parallel structure, PENTRAN has several unique new formulations and features that are necessary for achieving high parallel performance. For the Monte Carlo method, the major difficulty currently facing most users is the selection of an effective VR method and its associated parameters. For complex problems, generally, this process is very time consuming and may be complicated due to the possibility of biasing the results. In an attempt to eliminate this problem, the authors have developed the A{sup 3}MCNP (automated adjoint accelerated MCNP) code that automatically prepares parameters for source and transport biasing within a weight-window VR approach based on the S{sub n} adjoint function. A{sup 3}MCNP prepares the necessary input files for performing multigroup, 3-D adjoint S{sub n} calculations using TORT.« less

Decision making and sequential sampling from memory

PubMed Central

Shadlen, Michael N.; Shohamy, Daphna

2016-01-01

Decisions take time, and as a rule more difficult decisions take more time. But this only raises the question of what consumes the time. For decisions informed by a sequence of samples of evidence, the answer is straightforward: more samples are available with more time. Indeed the speed and accuracy of such decisions are explained by the accumulation of evidence to a threshold or bound. However, the same framework seems to apply to decisions that are not obviously informed by sequences of evidence samples. Here we proffer the hypothesis that the sequential character of such tasks involves retrieval of evidence from memory. We explore this hypothesis by focusing on value-based decisions and argue that mnemonic processes can account for regularities in choice and decision time. We speculate on the neural mechanisms that link sampling of evidence from memory to circuits that represent the accumulated evidence bearing on a choice. We propose that memory processes may contribute to a wider class of decisions that conform to the regularities of choice-reaction time predicted by the sequential sampling framework. PMID:27253447

The Human Exposure Model (HEM): A Tool to Support Rapid ...

EPA Pesticide Factsheets

The US EPA is developing an open and publically available software program called the Human Exposure Model (HEM) to provide near-field exposure information for Life Cycle Impact Assessments (LCIAs). Historically, LCIAs have often omitted impacts from near-field sources of exposure. The use of consumer products often results in near-field exposures (exposures that occur directly from the use of a product) that are larger than environmentally mediated exposures (i.e. far-field sources)1,2. Failure to consider near-field exposures could result in biases in LCIA-based determinations of the relative sustainability of consumer products. HEM is designed to provide this information.Characterizing near-field sources of chemical exposures present a challenge to LCIA practitioners. Unlike far-field sources, where multimedia mass balance models have been used to determine human exposure, near-field sources require product-specific models of human exposure and considerable information on product use and product composition. Such information is difficult and time-consuming to gather and curate. The HEM software will characterize the distribution of doses and product intake fractions2 across populations of product users and bystanders, allowing for differentiation by various demographic characteristics. The tool incorporates a newly developed database of the composition of more than 17,000 products, data on physical and chemical properties for more than 2,000 chemicals, and mo

Health and genetic ancestry testing: time to bridge the gap.

PubMed

Smart, Andrew; Bolnick, Deborah A; Tutton, Richard

2017-01-09

It is becoming increasingly difficult to keep information about genetic ancestry separate from information about health, and consumers of genetic ancestry tests are becoming more aware of the potential health risks associated with particular ancestral lineages. Because some of the proposed associations have received little attention from oversight agencies and professional genetic associations, scientific developments are currently outpacing governance regimes for consumer genetic testing. We highlight the recent and unremarked upon emergence of biomedical studies linking markers of genetic ancestry to disease risks, and show that this body of scientific research is becoming part of public discourse connecting ancestry and health. For instance, data on genome-wide ancestry informative markers are being used to assess health risks, and we document over 100 biomedical research articles that propose associations between mitochondrial DNA and Y chromosome markers of genetic ancestry and a wide variety of disease risks. Taking as an example an association between coronary heart disease and British men belonging to Y chromosome haplogroup I, we show how this science was translated into mainstream and online media, and how it circulates among consumers of genetic tests for ancestry. We find wide variations in how the science is interpreted, which suggests the potential for confusion or misunderstanding. We recommend that stakeholders involved in creating and using estimates of genetic ancestry reconsider their policies for communicating with each other and with the public about the health implications of ancestry information.

Light quality and efficiency of consumer grade solid state lighting products

NASA Astrophysics Data System (ADS)

Dam-Hansen, Carsten; Corell, Dennis Dan; Thorseth, Anders; Poulsen, Peter Behrensdorff

2013-03-01

The rapid development in flux and efficiency of Light Emitting Diodes (LED) has resulted in a flooding of the lighting market with Solid State Lighting (SSL) products. Many traditional light sources can advantageously be replaced by SSL products. There are, however, large variations in the quality of these products, and some are not better than the ones they are supposed to replace. A lack of quality demands and standards makes it difficult for consumers to get an overview of the SSL products. Here the results of a two year study investigating SSL products on the Danish market are presented. Focus has been on SSL products for replacement of incandescent lamps and halogen spotlights. The warm white light and good color rendering properties of these traditional light sources are a must for lighting in Denmark and the Nordic countries. 266 SSL replacement lamps have been tested for efficiency and light quality with respect to correlated color temperature and color rendering properties. This shows a trade-off between high color rendering warm white light and energy efficiency. The lumen and color maintenance over time has been investigated and results for products running over 11000 h will be presented. A new internet based SSL product selection tool will be shown. Here the products can be compared on efficiency, light quality parameters, thus providing a better basis for the selection of SSL products for consumers.

Dietary habits among persons hired on shift work.

PubMed

Strzemecka, Joanna; Bojar, Iwona; Strzemecka, Ewa; Owoc, Alfred

2014-01-01

Shift-work determinates irregular nutrition habits. The quality as well as the quantity of meals consumed by shift-workers can significantly affects their health. The aim of this study was to evaluate the dietary habits of people performing shift work in the Bogdanka mine. The study was carried out in the Bogdanka mine in Leczna. The questionnaire, which was designed by the author of this dissertation, was conducted among 700 shift-workers, working underground. The results were subjected to statistical analysis based on STATISTICA v. 7.1 (StatSoft, Poland) software. Nearly half of respondents reported regular consumption of meals (40.0%) Interviewees admitted having warm meals during the day (81.4%). The most frequently consumed meal during the day was the hot one (50.9%), three meals and more were consumed the least frequently (8.1%). Almost half of respondents considered their eating habits as inappropriate (46.3%). Among those, nearly half (68.2%) stated that shift - work is the reason for their nutrition habits. More than half of respondents (66.0%) admitted that shift work hampers regular consumption of meals. Shift work makes nourishment and regular consumption difficult. It contributes to the limited amount of warm meals eaten during the day. In order to maintain preventive health care and the improvement of quality of life, shift workers should be provided with an easier access to meals (including warm one) at specified times of the day.

Geometrically Nonlinear Static Analysis of 3D Trusses Using the Arc-Length Method

NASA Technical Reports Server (NTRS)

Hrinda, Glenn A.

2006-01-01

Rigorous analysis of geometrically nonlinear structures demands creating mathematical models that accurately include loading and support conditions and, more importantly, model the stiffness and response of the structure. Nonlinear geometric structures often contain critical points with snap-through behavior during the response to large loads. Studying the post buckling behavior during a portion of a structure's unstable load history may be necessary. Primary structures made from ductile materials will stretch enough prior to failure for loads to redistribute producing sudden and often catastrophic collapses that are difficult to predict. The responses and redistribution of the internal loads during collapses and possible sharp snap-back of structures have frequently caused numerical difficulties in analysis procedures. The presence of critical stability points and unstable equilibrium paths are major difficulties that numerical solutions must pass to fully capture the nonlinear response. Some hurdles still exist in finding nonlinear responses of structures under large geometric changes. Predicting snap-through and snap-back of certain structures has been difficult and time consuming. Also difficult is finding how much load a structure may still carry safely. Highly geometrically nonlinear responses of structures exhibiting complex snap-back behavior are presented and analyzed with a finite element approach. The arc-length method will be reviewed and shown to predict the proper response and follow the nonlinear equilibrium path through limit points.

Coaching the Debriefer: Peer Coaching to Improve Debriefing Quality in Simulation Programs.

PubMed

Cheng, Adam; Grant, Vincent; Huffman, James; Burgess, Gavin; Szyld, Demian; Robinson, Traci; Eppich, Walter

2017-10-01

Formal faculty development programs for simulation educators are costly and time-consuming. Peer coaching integrated into the teaching flow can enhance an educator's debriefing skills. We provide a practical guide for the who, what, when, where, why, and how of peer coaching for debriefing in simulation-based education. Peer coaching offers advantages such as psychological safety and team building, and it can benefit both the educator who is receiving feedback and the coach who is providing it. A feedback form for effective peer coaching includes the following: (1) psychological safety, (2) framework, (3) method/strategy, (4) content, (5) learner centeredness, (6) co-facilitation, (7) time management, (8) difficult situations, (9) debriefing adjuncts, and (10) individual style and experience. Institutional backing of peer coaching programs can facilitate implementation and sustainability. Program leaders should communicate the need and benefits, establish program goals, and provide assessment tools, training, structure, and evaluation to optimize chances of success.

A Simplified Model for Detonation Based Pressure-Gain Combustors

NASA Technical Reports Server (NTRS)

Paxson, Daniel E.

2010-01-01

A time-dependent model is presented which simulates the essential physics of a detonative or otherwise constant volume, pressure-gain combustor for gas turbine applications. The model utilizes simple, global thermodynamic relations to determine an assumed instantaneous and uniform post-combustion state in one of many envisioned tubes comprising the device. A simple, second order, non-upwinding computational fluid dynamic algorithm is then used to compute the (continuous) flowfield properties during the blowdown and refill stages of the periodic cycle which each tube undergoes. The exhausted flow is averaged to provide mixed total pressure and enthalpy which may be used as a cycle performance metric for benefits analysis. The simplicity of the model allows for nearly instantaneous results when implemented on a personal computer. The results compare favorably with higher resolution numerical codes which are more difficult to configure, and more time consuming to operate.

GSFC Ada programming guidelines

NASA Technical Reports Server (NTRS)

Roy, Daniel M.; Nelson, Robert W.

1986-01-01

A significant Ada effort has been under way at Goddard for the last two years. To ease the center's transition toward Ada (notably for future space station projects), a cooperative effort of half a dozen companies and NASA personnel was started in 1985 to produce programming standards and guidelines for the Ada language. The great richness of the Ada language and the need of programmers for good style examples makes Ada programming guidelines an important tool to smooth the Ada transition. Because of the natural divergence of technical opinions, the great diversity of our government and private organizations and the novelty of the Ada technology, the creation of an Ada programming guidelines document is a difficult and time consuming task. It is also a vital one. Steps must now be taken to ensure that the guide is refined in an organized but timely manner to reflect the growing level of expertise of the Ada community.

Diversity of marine planktonic ostracods in South China Sea: a DNA taxonomy approach.

PubMed

Xu, Lei; Wang, Lianggen; Ning, Jiajia; Li, Hong; Ji, Yingying; Du, Feiyan

2018-04-19

Ostracods (Crustacea, Ostracoda) are small bivalved crustaceans, contributing over 200 described species to the marine zooplankton community. They are widely distributed and are relatively abundant components of the mesozooplankton, playing an important role in the transport of organic matter to deep layers. However, identification of ostracods based on micro-morphological characters is extremely difficult and time-consuming. Previous fragmentary taxonomic studies of ostracods in the South China Sea (SCA), were based solely on morphology. Here, by analysing the mitochondrial COI gene, we explore the taxa across the SCA using molecular tools for the first time. Our results show that sequence divergence among species varies within a large range, from 12.93% to 35.82%. Sixteen of the taxonomic units recovered by DNA taxonomy agree well with morphology, but Paraconchoecia oblonga, Conchoecia magna and Halocypris brevirostris split into two clades each, each of which contains cryptic species.

Detection of Tephra Layers in Antarctic Sediment Cores with Hyperspectral Imaging

PubMed Central

Aymerich, Ismael F.; Oliva, Marc; Giralt, Santiago; Martín-Herrero, Julio

2016-01-01

Tephrochronology uses recognizable volcanic ash layers (from airborne pyroclastic deposits, or tephras) in geological strata to set unique time references for paleoenvironmental events across wide geographic areas. This involves the detection of tephra layers which sometimes are not evident to the naked eye, including the so-called cryptotephras. Tests that are expensive, time-consuming, and/or destructive are often required. Destructive testing for tephra layers of cores from difficult regions, such as Antarctica, which are useful sources of other kinds of information beyond tephras, is always undesirable. Here we propose hyperspectral imaging of cores, Self-Organizing Map (SOM) clustering of the preprocessed spectral signatures, and spatial analysis of the classified images as a convenient, fast, non-destructive method for tephra detection. We test the method in five sediment cores from three Antarctic lakes, and show its potential for detection of tephras and cryptotephras. PMID:26815202

Statistical evaluation of manual segmentation of a diffuse low-grade glioma MRI dataset.

PubMed

Ben Abdallah, Meriem; Blonski, Marie; Wantz-Mezieres, Sophie; Gaudeau, Yann; Taillandier, Luc; Moureaux, Jean-Marie

2016-08-01

Software-based manual segmentation is critical to the supervision of diffuse low-grade glioma patients and to the optimal treatment's choice. However, manual segmentation being time-consuming, it is difficult to include it in the clinical routine. An alternative to circumvent the time cost of manual segmentation could be to share the task among different practitioners, providing it can be reproduced. The goal of our work is to assess diffuse low-grade gliomas' manual segmentation's reproducibility on MRI scans, with regard to practitioners, their experience and field of expertise. A panel of 13 experts manually segmented 12 diffuse low-grade glioma clinical MRI datasets using the OSIRIX software. A statistical analysis gave promising results, as the practitioner factor, the medical specialty and the years of experience seem to have no significant impact on the average values of the tumor volume variable.

Application of LIBS and TMA for the determination of combustion predictive indices of coals and coal blends

NASA Astrophysics Data System (ADS)

Ctvrtnickova, T.; Mateo, M. P.; Yañez, A.; Nicolas, G.

2011-04-01

Presented work brings results of Laser-Induced Breakdown Spectroscopy (LIBS) and Thermo-Mechanical Analysis (TMA) of coals and coal blends used in coal fired power plants all over Spain. Several coal specimens, its blends and corresponding laboratory ash were analyzed by mentioned techniques and results were compared to standard laboratory methods. The indices of slagging, which predict the tendency of coal ash deposition on the boiler walls, were determined by means of standard chemical analysis, LIBS and TMA. The optimal coal suitable to be blended with the problematic national lignite coal was suggested in order to diminish the slagging problems. Used techniques were evaluated based on the precision, acquisition time, extension and quality of information they could provide. Finally, the applicability of LIBS and TMA to the successful calculation of slagging indices is discussed and their substitution of time-consuming and instrumentally difficult standard methods is considered.

Dendrometer bands made easy: using modified cable ties to measure incremental growth of trees

USGS Publications Warehouse

Anemaet, Evelyn R.; Middleton, Beth A.

2013-01-01

Dendrometer bands are a useful way to make sequential repeated measurements of tree growth, but traditional dendrometer bands can be expensive, time consuming, and difficult to construct in the field. An alternative to the traditional method of band construction is to adapt commercially available materials. This paper describes how to construct and install dendrometer bands using smooth-edged, stainless steel, cable tie banding and attachable rollerball heads. As a performance comparison, both traditional and cable tie dendrometer bands were installed on baldcypress trees at the National Wetlands Research Center in Lafayette, Louisiana, by both an experienced and a novice worker. Band installation times were recorded, and growth of the trees as estimated by the two band types was measured after approximately one year, demonstrating equivalence of the two methods. This efficient approach to dendrometer band construction can help advance the knowledge of long-term tree growth in ecological studies.

Assessment of patient support surfaces: principle, practice and limitations.

PubMed

Rithalia, S

2005-01-01

Pressure ulcers cause great pain and suffering to patients as well as unnecessary strain on nursing staff. Their treatment is both costly and time consuming. Every effort therefore should be directed towards their prevention. Understanding of the aetiology of pressure ulcers is still incomplete and assessment of devices aimed at prevention is difficult. Over the years, numerous parameters, including interface pressure and transcutaneous blood gas measurements, have been used to evaluate mattresses and cushions. However, the quality of the data gathered is variable and its clinical interpretation remains unsatisfactory. It could be said that the science of evaluation of support surfaces is still at a formative stage, as clinical validation of many of the approaches has yet to be carried out.

Aptasensors for quantitative detection of Salmonella Typhimurium.

PubMed

Ansari, Najmeh; Yazdian-Robati, Rezvan; Shahdordizadeh, Mahin; Wang, Zhouping; Ghazvini, Kiarash

2017-09-15

Salmonella is one of the most frequent causes of food borne infectious disease. Among nearly 2500 documented serotypes are reported, Salmonella Typhimurium is the number one serotype associated with salmonellosis worldwide. Many different methods have been developed for the detection and quantification of S. typhimurium. Most of these assays are usually expensive, time consuming and require difficult sample preparation steps. Therefore, it is necessary to develop rapid, robust, cost-effective and sensitive alternative detection methods. In the last years, aptasensors, used for detection of S. typhimurium in different samples. In this review, recent advances and applications of aptasensors for the detection and quantification of S. typhimurium in details have been summarized. Copyright © 2017 Elsevier Inc. All rights reserved.

The Mental Status Expert (MSE): an expert system for scoring and interpreting the mental status examination.

PubMed Central

Hier, D. B.; Jao, C. S.; Brint, S. U.

1994-01-01

The mental status examination is the most difficult and time-consuming portion of the neurological examination. A complete mental status examination requires the examiner to assess alertness, memory, language, praxis, gnosis, attention, and visual-spatial functions. Findings of the mental status need to be interpreted in terms of severity of deficits, nature of the deficits, likely etiology, and likely area of corresponding brain injury. The performance of an accurate, complete, and detailed mental status examination is a daunting task for the medical student or resident in training. Traditional mental status examinations show considerable inter-examiner variability for items administered and for interpretation of abnormalities. Even in academic settings, mental status examinations have little educational content. PMID:7949891

Multispectral system analysis through modeling and simulation

NASA Technical Reports Server (NTRS)

Malila, W. A.; Gleason, J. M.; Cicone, R. C.

1977-01-01

The design and development of multispectral remote sensor systems and associated information extraction techniques should be optimized under the physical and economic constraints encountered and yet be effective over a wide range of scene and environmental conditions. Direct measurement of the full range of conditions to be encountered can be difficult, time consuming, and costly. Simulation of multispectral data by modeling scene, atmosphere, sensor, and data classifier characteristics is set forth as a viable alternative, particularly when coupled with limited sets of empirical measurements. A multispectral system modeling capability is described. Use of the model is illustrated for several applications - interpretation of remotely sensed data from agricultural and forest scenes, evaluating atmospheric effects in Landsat data, examining system design and operational configuration, and development of information extraction techniques.

Multispectral system analysis through modeling and simulation

NASA Technical Reports Server (NTRS)

Malila, W. A.; Gleason, J. M.; Cicone, R. C.

1977-01-01

The design and development of multispectral remote sensor systems and associated information extraction techniques should be optimized under the physical and economic constraints encountered and yet be effective over a wide range of scene and environmental conditions. Direct measurement of the full range of conditions to be encountered can be difficult, time consuming, and costly. Simulation of multispectral data by modeling scene, atmosphere, sensor, and data classifier characteristics is set forth as a viable alternative, particularly when coupled with limited sets of empirical measurements. A multispectral system modeling capability is described. Use of the model is illustrated for several applications - interpretation of remotely sensed data from agricultural and forest scenes, evaluating atmospheric effects in LANDSAT data, examining system design and operational configuration, and development of information extraction techniques.

‘Old Drugs for New Applications’: Can Orthopedic Research Benefit from This Strategy?

PubMed Central

Pan, Xiaohua; Cheng, Wenxiang; Wang, Jiali; Qin, Ling; Lai, Yuxiao; Tang, Jian; Shang, Peng; Ren, Peigen; Zhang, Peng

2011-01-01

New drug exploration is difficult in a clinical setting and the development of new drugs may be costly and time consuming. With further research into the pathological mechanisms and etiology of diseases as well as the rapid development of biological techniques, many ‘old drugs’ that have been applied in clinics may have new therapeutic functions which may shed light on clinical management. Based on this, we have investigated the ‘old drugs for new applications’ strategy in pharmacology which may be less expensive and more efficient in the clinical setting. In this paper we have explored and illustrated the potential applications of ‘old drugs’ for the treatment of orthopedic diseases, especially in arthritis and osteoporosis therapy. PMID:22870479

Spacecraft Fire Safety and Microgravity Combustion Research

NASA Technical Reports Server (NTRS)

Tien, James S.; Ferkul, Paul (Technical Monitor)

2001-01-01

Fire safety is an important concern in our daily lives and it plays a special role in the human presence in space. In a spacecraft, the outside environment is hostile and the opportunity to escape is small. Rescue missions are difficult and time consuming. As a result, we should avoid the occurrence of fires in spacecraft as much as possible. If a fire occurs, we need to keep it small and under control. This implies that the materials used on board the spacecraft should be screened carefully, all the machines and devices need to be operated without accident, and fire detectors have to function properly. Once a fire is detected, it can be extinguished quickly and the cabin can be cleaned up to restore operation and sustain life.

Improving the Asynchronous Video Learning Model

ERIC Educational Resources Information Center

Griffiths, Michael E.

2010-01-01

Online education is popular from a consumer perspective, but there are elements of face-to-face instruction and assessment that are difficult to reproduce online (Bassoppo-Moyo 2006). The difficulty of reproducing valued elements of a face-to-face setting leads to concerns regarding the overall quality of the online learning experience.…

Income security. Do it yourself.

PubMed

Kosterlitz, J

1996-11-23

Washington--and Americans--are at a crossroads between the collective approach to social security and medicare and the corporate trend toward self-reliance. Workers may become more prudent consumers as they assume responsibility for retirement and health care costs, but the disadvantaged may find it difficult to provide for their own needs.

The Ethical Climate of Public Schooling under New Public Management.

ERIC Educational Resources Information Center

Dempster, Neil; Freakley, Mark; Parry, Lindsay

2001-01-01

Today's competitive climate is pressuring public school educators to improve schools in an environment dominated by parent and consumer choice. This article draws on two studies involving Australian principals that illustrate difficult ethical situations. Most participants found the values of marketing and economic rationalism to be inconsistent…

A novel tele-medical environment appropriate for use in tele-advisory and tele-surgery cases.

PubMed

Chatzipapadopoulos, F; Georgantas, N; Kotaras, A; Mamais, G; Tombros, S; Tselikis, G

1996-08-01

Tele-medical systems have been recently introduced in the field of networking as promising applications that can significantly improve the offering of medical treatment by providing services such as tele-advising, tele-surgery and remote monitoring in places where the presence of doctors or any medical specialists is difficult or time consuming. Some already existent networking models can be used for the establishment of a connection between the communicating sides. The offered network's security is also a significant factor. The present paper describes a software environment implementing a particular aspect of a tele-medical system. The developed system includes features such as direct communication between doctors and medical assistants, medical information acquisition and storing and high band information transfer in real-time. TCP/IP point-to-point protocol has been used for the implementation of the non bandwidth-critical connections. The application introduces novel features with the use of ATM connection for supporting the time-critical service of video transfer to and from the medical database.

Colonoscopy procedure simulation: virtual reality training based on a real time computational approach.

PubMed

Wen, Tingxi; Medveczky, David; Wu, Jackie; Wu, Jianhuang

2018-01-25

Colonoscopy plays an important role in the clinical screening and management of colorectal cancer. The traditional 'see one, do one, teach one' training style for such invasive procedure is resource intensive and ineffective. Given that colonoscopy is difficult, and time-consuming to master, the use of virtual reality simulators to train gastroenterologists in colonoscopy operations offers a promising alternative. In this paper, a realistic and real-time interactive simulator for training colonoscopy procedure is presented, which can even include polypectomy simulation. Our approach models the colonoscopy as thick flexible elastic rods with different resolutions which are dynamically adaptive to the curvature of the colon. More material characteristics of this deformable material are integrated into our discrete model to realistically simulate the behavior of the colonoscope. We present a simulator for training colonoscopy procedure. In addition, we propose a set of key aspects of our simulator that give fast, high fidelity feedback to trainees. We also conducted an initial validation of this colonoscopic simulator to determine its clinical utility and efficacy.

A Fully Automated Approach to Spike Sorting.

PubMed

Chung, Jason E; Magland, Jeremy F; Barnett, Alex H; Tolosa, Vanessa M; Tooker, Angela C; Lee, Kye Y; Shah, Kedar G; Felix, Sarah H; Frank, Loren M; Greengard, Leslie F

2017-09-13

Understanding the detailed dynamics of neuronal networks will require the simultaneous measurement of spike trains from hundreds of neurons (or more). Currently, approaches to extracting spike times and labels from raw data are time consuming, lack standardization, and involve manual intervention, making it difficult to maintain data provenance and assess the quality of scientific results. Here, we describe an automated clustering approach and associated software package that addresses these problems and provides novel cluster quality metrics. We show that our approach has accuracy comparable to or exceeding that achieved using manual or semi-manual techniques with desktop central processing unit (CPU) runtimes faster than acquisition time for up to hundreds of electrodes. Moreover, a single choice of parameters in the algorithm is effective for a variety of electrode geometries and across multiple brain regions. This algorithm has the potential to enable reproducible and automated spike sorting of larger scale recordings than is currently possible. Copyright © 2017 Elsevier Inc. All rights reserved.

RPython high-level synthesis

NASA Astrophysics Data System (ADS)

Cieszewski, Radoslaw; Linczuk, Maciej

2016-09-01

The development of FPGA technology and the increasing complexity of applications in recent decades have forced compilers to move to higher abstraction levels. Compilers interprets an algorithmic description of a desired behavior written in High-Level Languages (HLLs) and translate it to Hardware Description Languages (HDLs). This paper presents a RPython based High-Level synthesis (HLS) compiler. The compiler get the configuration parameters and map RPython program to VHDL. Then, VHDL code can be used to program FPGA chips. In comparison of other technologies usage, FPGAs have the potential to achieve far greater performance than software as a result of omitting the fetch-decode-execute operations of General Purpose Processors (GPUs), and introduce more parallel computation. This can be exploited by utilizing many resources at the same time. Creating parallel algorithms computed with FPGAs in pure HDL is difficult and time consuming. Implementation time can be greatly reduced with High-Level Synthesis compiler. This article describes design methodologies and tools, implementation and first results of created VHDL backend for RPython compiler.

Monitoring mangrove forests: Are we taking full advantage of technology?

NASA Astrophysics Data System (ADS)

Younes Cárdenas, Nicolás; Joyce, Karen E.; Maier, Stefan W.

2017-12-01

Mangrove forests grow in the estuaries of 124 tropical countries around the world. Because in-situ monitoring of mangroves is difficult and time-consuming, remote sensing technologies are commonly used to monitor these ecosystems. Landsat satellites have provided regular and systematic images of mangrove ecosystems for over 30 years, yet researchers often cite budget and infrastructure constraints to justify the underuse this resource. Since 2001, over 50 studies have used Landsat or ASTER imagery for mangrove monitoring, and most focus on the spatial extent of mangroves, rarely using more than five images. Even after the Landsat archive was made free for public use, few studies used more than five images, despite the clear advantages of using more images (e.g. lower signal-to-noise ratios). The main argument of this paper is that, with freely available imagery and high performance computing facilities around the world, it is up to researchers to acquire the necessary programming skills to use these resources. Programming skills allow researchers to automate repetitive and time-consuming tasks, such as image acquisition and processing, consequently reducing up to 60% of the time dedicated to these activities. These skills also help scientists to review and re-use algorithms, hence making mangrove research more agile. This paper contributes to the debate on why scientists need to learn to program, not only to challenge prevailing approaches to mangrove research, but also to expand the temporal and spatial extents that are commonly used for mangrove research.

Making texts in electronic health records comprehensible to consumers: a prototype translator.

PubMed

Zeng-Treitler, Qing; Goryachev, Sergey; Kim, Hyeoneui; Keselman, Alla; Rosendale, Douglas

2007-10-11

Narrative reports from electronic health records are a major source of content for personal health records. We designed and implemented a prototype text translator to make these reports more comprehensible to consumers. The translator identifies difficult terms, replaces them with easier synonyms, and generates and inserts explanatory texts for them. In feasibility testing, the application was used to translate 9 clinical reports. Majority (68.8%) of text replacements and insertions were deemed correct and helpful by expert review. User evaluation demonstrated a non-statistically significant trend toward better comprehension when translation is provided (p=0.15).

Making Texts in Electronic Health Records Comprehensible to Consumers: A Prototype Translator

PubMed Central

Zeng-Treitler, Qing; Goryachev, Sergey; Kim, Hyeoneui; Keselman, Alla; Rosendale, Douglas

2007-01-01

Narrative reports from electronic health records are a major source of content for personal health records. We designed and implemented a prototype text translator to make these reports more comprehensible to consumers. The translator identifies difficult terms, replaces them with easier synonyms, and generates and inserts explanatory texts for them. In feasibility testing, the application was used to translate 9 clinical reports. Majority (68.8%) of text replacements and insertions were deemed correct and helpful by expert review. User evaluation demonstrated a non-statistically significant trend toward better comprehension when translation is provided (p=0.15). PMID:18693956

Changes in Consumer Demand Following Public Reporting of Summary Quality Ratings: An Evaluation in Nursing Homes.

PubMed

Werner, Rachel M; Konetzka, R Tamara; Polsky, Daniel

2016-06-01

Limited consumer use of health care report cards may be due to the large amount of information presented in report cards, which can be difficult to understand. These limitations may be overcome with summary measures. Our objective was to evaluate consumer response to summary measures in the setting of nursing homes. 2005-2010 nursing home Minimum Data Set and Online Survey, Certification and Reporting (OSCAR) datasets. In December 2008, Medicare converted its nursing home report card to summary or star ratings. We test whether there was a change in consumer demand for nursing homes related to the nursing home's star rating after the information was released. The star rating system was associated with a significant change in consumer demand for low- and high-scoring facilities. After the star-based rating system was released, 1-star facilities typically lost 8 percent of their market share and 5-star facilities gained over 6 percent of their market share. The nursing home star rating system significantly affected consumer demand for high- and low-rated nursing homes. These results support the use of summary measures in report cards. © Health Research and Educational Trust.

Text mining to decipher free-response consumer complaints: insights from the NHTSA vehicle owner's complaint database.

PubMed

Ghazizadeh, Mahtab; McDonald, Anthony D; Lee, John D

2014-09-01

This study applies text mining to extract clusters of vehicle problems and associated trends from free-response data in the National Highway Traffic Safety Administration's vehicle owner's complaint database. As the automotive industry adopts new technologies, it is important to systematically assess the effect of these changes on traffic safety. Driving simulators, naturalistic driving data, and crash databases all contribute to a better understanding of how drivers respond to changing vehicle technology, but other approaches, such as automated analysis of incident reports, are needed. Free-response data from incidents representing two severity levels (fatal incidents and incidents involving injury) were analyzed using a text mining approach: latent semantic analysis (LSA). LSA and hierarchical clustering identified clusters of complaints for each severity level, which were compared and analyzed across time. Cluster analysis identified eight clusters of fatal incidents and six clusters of incidents involving injury. Comparisons showed that although the airbag clusters across the two severity levels have the same most frequent terms, the circumstances around the incidents differ. The time trends show clear increases in complaints surrounding the Ford/Firestone tire recall and the Toyota unintended acceleration recall. Increases in complaints may be partially driven by these recall announcements and the associated media attention. Text mining can reveal useful information from free-response databases that would otherwise be prohibitively time-consuming and difficult to summarize manually. Text mining can extend human analysis capabilities for large free-response databases to support earlier detection of problems and more timely safety interventions.

Consumer subjectivity and U.S. health care reform.

PubMed

West, Emily

2014-01-01

Health care consumerism is an important frame in U.S. health care policy, especially in recent media and policy discourse about federal health care reform. This article reports on qualitative fieldwork with health care users to find out how people interpret and make sense of the identity of "health care consumer." It proposes that while the term consumer is normally understood as a descriptive label for users who purchase health care and insurance services, it should actually be understood as a metaphor, carrying with it a host of associations that shape U.S. health care policy debates in particular ways. Based on interviews with 36 people, patient was the dominant term people used to describe themselves, but consumer was the second most popular. Informants interpreted the health care consumer as being informed, proactive, and having choices, but there were also "semiotic traps," or difficult-to-resolve tensions for this identity. The discourse of consumerism functions in part as code for individual responsibility, and therefore as a classed moral discourse, with implications for U.S. health care policy.

Making difficult decisions: the role of quality of care in choosing a nursing home.

PubMed

Pesis-Katz, Irena; Phelps, Charles E; Temkin-Greener, Helena; Spector, William D; Veazie, Peter; Mukamel, Dana B

2013-05-01

We investigated how quality of care affects choosing a nursing home. We examined nursing home choice in California, Ohio, New York, and Texas in 2001, a period before the federal Nursing Home Compare report card was published. Thus, consumers were less able to observe clinical quality or clinical quality was masked. We modeled nursing home choice by estimating a conditional multinomial logit model. In all states, consumers were more likely to choose nursing homes of high hotel services quality but not clinical care quality. Nursing home choice was also significantly associated with shorter distance from prior residence, not-for-profit status, and larger facility size. In the absence of quality report cards, consumers choose a nursing home on the basis of the quality dimensions that are easy for them to observe, evaluate, and apply to their situation. Future research should focus on identifying the quality information that offers the most value added to consumers.

Making Difficult Decisions: The Role of Quality of Care in Choosing a Nursing Home

PubMed Central

Phelps, Charles E.; Temkin-Greener, Helena; Spector, William D.; Veazie, Peter; Mukamel, Dana B.

2013-01-01

Objectives. We investigated how quality of care affects choosing a nursing home. Methods. We examined nursing home choice in California, Ohio, New York, and Texas in 2001, a period before the federal Nursing Home Compare report card was published. Thus, consumers were less able to observe clinical quality or clinical quality was masked. We modeled nursing home choice by estimating a conditional multinomial logit model. Results. In all states, consumers were more likely to choose nursing homes of high hotel services quality but not clinical care quality. Nursing home choice was also significantly associated with shorter distance from prior residence, not-for-profit status, and larger facility size. Conclusions. In the absence of quality report cards, consumers choose a nursing home on the basis of the quality dimensions that are easy for them to observe, evaluate, and apply to their situation. Future research should focus on identifying the quality information that offers the most value added to consumers. PMID:23488519

Fatty acid profiles of in vitro digested processed milk

USDA-ARS?s Scientific Manuscript database

Digestion of milkfat releases some of the long-chain (18-carbon) fatty acids (FA) that can provide health benefits to the consumer, yet because they are found in small amounts and can be difficult to identify, there is limited information on the effects that common fluid milk processing may have on ...

Complex VLSI Feature Comparison for Commercial Microelectronics Verification

DTIC Science & Technology

2014-03-27

69 4.2.4 Circuit E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 4.3 Summary...used for high-performance consumer microelectronics. Volume is a significant factor in constraining the technology limit for defense circuits, but it...surveyed in a 2010 Department of Commerce report found counterfeit chips difficult to identify due to improved fabrication quality in overseas counterfeit

Researching Community-Based Support Networks: What Policymakers Should Know

ERIC Educational Resources Information Center

Dadich, Ann

2009-01-01

Self-help support groups (SHSGs) have a valuable role in civic society. However, it is difficult to measure their value through sole use of the positivist approaches that interest policymakers. This is because SHSGs are consumer-driven and voluntary. Thus, they cannot be regulated by research agendas or prescribed like treatment. Although social…

[Labeling of vitamin and mineral supplements: a revision of the federal normative regulations].

PubMed

de Carvalho, Patricia Borges; Araújo, Wilma Maria Coelho

2008-04-01

In Brazil, there is a steadily increasing offer and demand for products on the basis of vitamins and minerals. According to Brazilian law, the differences in the dosages offered to the consumer in each product are the parameter for its classification as alimentary supplement or medicament. The limit between these two concepts, however, is confusing and lacks clearness. Considering the risk posed by imprudent consumption of such products and seeking to facilitate the interpretation and consolidation of the norms dealing with vitamin and mineral products as well as to create the basis for a master's degree dissertation, a bibliographical survey and evaluation of the entire juridical basis regarding the labeling of these products was conducted. It was concluded that the normative regulations are extensive, complex and of difficult understanding, with a great number of norms dealing with the same subject issued by different authorities. These norms are not consolidated leading to difficult interpretation by retailers, health professionals and consumers and even to failures in the application of these norms by the control authorities. Suggestions are made for helping to correct the failures identified in the study.

Challenges of user-centred assistive technology provision in Australia: shopping without a prescription.

PubMed

Steel, Emily J; Layton, Natasha Ann; Foster, Michele M; Bennett, Sally

2016-01-01

People with disability have a right to assistive technology devices and services, to support their inclusion and participation in society. User-centred approaches aim to address consumer dissatisfaction and sub-optimal outcomes from assistive technology (AT) provision, but make assumptions of consumer literacy and empowerment. Policy discourses about consumer choice prompt careful reflection, and this paper aims to provide a critical perspective on user involvement in assistive technology provision. User-centred approaches are considered, using literature to critically reflect on what user involvement means in AT provision. Challenges at the level of interactions between practitioners and consumers, and also the level of markets and policies are discussed, using examples from Australia. There is no unanimous conceptual framework for user-centred practice. Power imbalances and differing perspectives between practitioners and consumers make it difficult for consumers to feel empowered. Online access to information and international suppliers has not surmounted information asymmetries for consumers or lifted the regulation of publicly funded AT devices. Ensuring access and equity in the public provision of AT is challenging in an expanding market with diverse stakeholders. Consumers require personalised information and support to facilitate their involvement and choice in AT provision. Implications for Rehabilitation Variations in approaches informing AT provision practices have a profound impact on equity of access and outcomes for consumers. An internationalised and online market for AT devices is increasing the need for effective information provision strategies and services. Power imbalances between practitioners and consumers present barriers to the realisation of user-centred practice.

Long term rebaudioside A treatment does not alter circadian activity rhythms, adiposity, or insulin action in male mice

PubMed Central

Reynolds, Thomas H.; Soriano, Rachelle A.; Obadi, Obadi A.; Murkland, Stanley; Possidente, Bernard

2017-01-01

Obesity is a major public health problem that is highly associated with insulin resistance and type 2 diabetes, two conditions associated with circadian disruption. To date, dieting is one of the only interventions that result in substantial weight loss, but restricting caloric intake is difficult to maintain long-term. The use of artificial sweeteners, particularly in individuals that consume sugar sweetened beverages (energy drinks, soda), can reduce caloric intake and possibly facilitate weight loss. The purpose of the present study was to examine the effects of the artificial sweetener, rebaudioside A (Reb-A), on circadian rhythms, in vivo insulin action, and the susceptibility to diet-induced obesity. Six month old male C57BL/6 mice were assigned to a control or Reb-A (0.1% Reb-A supplemented drinking water) group for six months. Circadian wheel running rhythms, body weight, caloric intake, insulin action, and susceptibility to diet-induced obesity were assessed. Time of peak physical activity under a 12:12 light-dark (LD) cycle, mean activity levels, and circadian period in constant dark were not significantly different in mice that consumed Reb-A supplemented water compared to normal drinking water, indicating that circadian rhythms and biological clock function were unaltered. Although wheel running significantly reduced body weight in both Reb-A and control mice (P = 0.0001), consuming Reb-A supplemented water did not alter the changes in body weight following wheel running (P = 0.916). In vivo insulin action, as assessed by glucose, insulin, and pyruvate tolerance tests, was not different between mice that consumed Reb-A treated water compared to normal drinking water. Finally, Reb-A does not appear to change the susceptibility to diet-induced obesity as both groups of mice gained similar amounts of body weight when placed on a high fat diet. Our results indicate that consuming Reb-A supplemented water does not promote circadian disruption, insulin resistance, or obesity. PMID:28475596

Long term rebaudioside A treatment does not alter circadian activity rhythms, adiposity, or insulin action in male mice.

PubMed

Reynolds, Thomas H; Soriano, Rachelle A; Obadi, Obadi A; Murkland, Stanley; Possidente, Bernard

2017-01-01

Obesity is a major public health problem that is highly associated with insulin resistance and type 2 diabetes, two conditions associated with circadian disruption. To date, dieting is one of the only interventions that result in substantial weight loss, but restricting caloric intake is difficult to maintain long-term. The use of artificial sweeteners, particularly in individuals that consume sugar sweetened beverages (energy drinks, soda), can reduce caloric intake and possibly facilitate weight loss. The purpose of the present study was to examine the effects of the artificial sweetener, rebaudioside A (Reb-A), on circadian rhythms, in vivo insulin action, and the susceptibility to diet-induced obesity. Six month old male C57BL/6 mice were assigned to a control or Reb-A (0.1% Reb-A supplemented drinking water) group for six months. Circadian wheel running rhythms, body weight, caloric intake, insulin action, and susceptibility to diet-induced obesity were assessed. Time of peak physical activity under a 12:12 light-dark (LD) cycle, mean activity levels, and circadian period in constant dark were not significantly different in mice that consumed Reb-A supplemented water compared to normal drinking water, indicating that circadian rhythms and biological clock function were unaltered. Although wheel running significantly reduced body weight in both Reb-A and control mice (P = 0.0001), consuming Reb-A supplemented water did not alter the changes in body weight following wheel running (P = 0.916). In vivo insulin action, as assessed by glucose, insulin, and pyruvate tolerance tests, was not different between mice that consumed Reb-A treated water compared to normal drinking water. Finally, Reb-A does not appear to change the susceptibility to diet-induced obesity as both groups of mice gained similar amounts of body weight when placed on a high fat diet. Our results indicate that consuming Reb-A supplemented water does not promote circadian disruption, insulin resistance, or obesity.

Minimally invasive knee arthroplasty: An overview

PubMed Central

Tria, Alfred J; Scuderi, Giles R

2015-01-01

Minimally invasive surgery (MIS) for arthroplasty of the knee began with surgery for unicondylar knee arthroplasty (UKA). Partial knee replacements were designed in the 1970s and were amenable to a more limited exposure. In the 1990s Repicci popularized the MIS for UKA. Surgeons began to apply his concepts to total knee arthroplasty. Four MIS surgical techniques were developed: quadriceps sparing, mini-mid vastus, mini-subvastus, and mini-medial parapatellar. The quadriceps sparing technique is the most limited one and is also the most difficult. However, it is the least invasive and allows rapid recovery. The mini-midvastus is the most common technique because it affords slightly better exposure and can be extended. The mini-subvastus technique entirely avoids incising the quadriceps extensor mechanism but is time consuming and difficult in the obese and in the muscular male patient. The mini-parapatellar technique is most familiar to surgeons and represents a good starting point for surgeons who are learning the techniques. The surgeries are easier with smaller instruments but can be performed with standard ones. The techniques are accurate and do lead to a more rapid recovery, with less pain, less blood loss, and greater motion if they are appropriately performed. PMID:26601062

[Enteroviruses responsible for acute hemorrhagic conjunctivitis].

PubMed

Lévêque, N; Huguet, P; Norder, H; Chomel, J-J

2010-04-01

Acute hemorrhagic conjunctivitis (AHC) is an epidemic form of highly contagious conjunctivitis, characterized by conjunctival hemorrhages. The first AHC outbreak was described in 1969 in Ghana, West Africa, and was called Apollo disease, from the Apollo landing on the moon. This outbreak was caused by Enterovirus 70 (EV70) together with a Coxsackievirus A24 (CVA24v) variant, which are the major etiological agents involved in AHC outbreaks worldwide. AHC is known to be directly transmitted by close person-to-person contact or indirectly through soiled ophthalmological materials or unsafe recreational water. Recently, a possible airborne virus spread was suggested which could explain the high transmission rate of the disease. In the absence of a specific antiviral therapy, a rapid diagnosis of the causative agent is required to distinguish AHC due to enteroviruses from other ocular infectious diseases, for there are active drugs, or to quickly implement proper public health measures to limit the extension of the outbreak. However, virus identification remains difficult and time-consuming. Moreover, virological diagnosis is difficult to implement in developing countries where AHC has recently become a major problem for public health. Copyright 2009 Elsevier Masson SAS. All rights reserved.

Building the occupational health team: keys to successful interdisciplinary collaboration.

PubMed

Wachs, Joy E

2005-04-01

Teamwork among occupational health and safety professionals, management, and employees is vital to solving today's complex problems cost-effectively. No single discipline can meet all the needs of workers and the workplace. However, teamwork can be time-consuming and difficult if attention is not given to the role of the team leader, the necessary skills of team members, and the importance of a supportive environment. Bringing team members together regularly to foster positive relationships and infuse them with the philosophy of strength in diversity is essential for teams to be sustained and work to be accomplished. By working in tandem, occupational health and safety professionals can become the model team in business and industry delivering on their promise of a safe and healthy workplace for America's work force.

The Fermilab Isdn Pilot Project: Experiences and Future Plans

NASA Astrophysics Data System (ADS)

Martin, D. E.; Lego, A. J.; Clifford, A. E.

Fully operational in June of 1994, the Fermilab ISDN Pilot Project was started to gain insight into the costs and benefits of providing ISDN service to the homes of Fermilab researchers. Fourteen users were chosen from throughout Fermilab, but the number of Fermilab-employed spouses pushed the total user count to 20. Each home was equipped with a basic rate ISDN (BRI) line, a BRI Ethernet half-bridge, and an NT-1. An inter-departmental team coordinated the project. Usage at each home was tracked and frequent surveys were attempted. Lessons learned include: working with Ameritech can be difficult; careful monitoring is essential; and configuration of home computing equipment is very time consuming. Plans include moving entirely to primary rate ISDN hubs, support for different home ISDN equipment and better usage and performance tracking.

Inspiratory muscle training in difficult to wean patients: work it harder, make it better, do it faster, makes us stronger.

PubMed

Nava, Stefano; Fasano, Luca

2011-01-01

Weaning from prolonged mechanical ventilation is a complex, time-consuming process that involves the loss of force/generating capacity of the inspiratory muscle. In their study 'Inspiratory muscle strength training improves the outcome in failure to wean patients: a randomized trial', Martin and colleagues showed that the use of an inspiratory muscle strength program increased the maximal inspiratory pressure and improved weaning success compared to a control group. The study was performed mainly in post-surgical patients, however, and the results, therefore, may not be generalizable to other subsets of patients, such as those with chronic obstructive pulmonary disease or congestive heart failure. Indeed, the study applied so-called 'strength training' and not 'endurance training', which may be more appropriate in certain circumstances.

Automated extraction of subdural electrode grid from post-implant MRI scans for epilepsy surgery

NASA Astrophysics Data System (ADS)

Pozdin, Maksym A.; Skrinjar, Oskar

2005-04-01

This paper presents an automated algorithm for extraction of Subdural Electrode Grid (SEG) from post-implant MRI scans for epilepsy surgery. Post-implant MRI scans are corrupted by the image artifacts caused by implanted electrodes. The artifacts appear as dark spherical voids and given that the cerebrospinal fluid is also dark in T1-weigthed MRI scans, it is a difficult and time-consuming task to manually locate SEG position relative to brain structures of interest. The proposed algorithm reliably and accurately extracts SEG from post-implant MRI scan, i.e. finds its shape and position relative to brain structures of interest. The algorithm was validated against manually determined electrode locations, and the average error was 1.6mm for the three tested subjects.

Impact of wireless communication on multimedia application performance

NASA Astrophysics Data System (ADS)

Brown, Kevin A.

1999-01-01

Multimedia applications and specifically voice and video conferencing tools are widely used in business communications, and are quickly being discovered by the consumer market as well. At the same time, wireless communication services such as PCS voice and cellular data are becoming very popular, leading to the desire to deploy multimedia applications in the wireless environment. Wireless links, however, exhibit several characteristics which are different from traditional wired networks. These include: dynamically changing bandwidth due to mobile host movement in and out of cell where bandwidth is shared, high rates of packet corruption and subsequent loss, and frequent are lengthy disconnections due to obstacles, fading, and movement between cells. In addition, these effects are short-lived and difficult to reproduce, leading to a lack of adequate testing and analysis for applications used in wireless environments.

Model-based reasoning in SSF ECLSS

NASA Technical Reports Server (NTRS)

Miller, J. K.; Williams, George P. W., Jr.

1992-01-01

The interacting processes and reconfigurable subsystems of the Space Station Freedom Environmental Control and Life Support System (ECLSS) present a tremendous technical challenge to Freedom's crew and ground support. ECLSS operation and problem analysis is time-consuming for crew members and difficult for current computerized control, monitoring, and diagnostic software. These challenges can be at least partially mitigated by the use of advanced techniques such as Model-Based Reasoning (MBR). This paper will provide an overview of MBR as it is being applied to Space Station Freedom ECLSS. It will report on work being done to produce intelligent systems to help design, control, monitor, and diagnose Freedom's ECLSS. Specifically, work on predictive monitoring, diagnosability, and diagnosis, with emphasis on the automated diagnosis of the regenerative water recovery and air revitalization processes will be discussed.

Implementation Of Quality Management System For Irradiation Processing Services

NASA Astrophysics Data System (ADS)

Lungu, Ion-Bogdan; Manea, Maria-Mihaela

2015-07-01

In today's market, due to an increasing competitiveness, quality management has set itself as an indispensable tool and a reference point for every business. It is ultimately focused on customer satisfaction which is a stringent factor for every business. Implementing and maintaining a QMS is a rather difficult, time consuming and expensive process which must be done with respect of many factors. The aim of this paper is to present a case study for implementing QMS ISO 9001 in a gamma irradiation treatment service provider. The research goals are the identification of key benefits, reasons, advantages, disadvantages, drawbacks etc for a successful QMS implementation and use. Finally, the expected results focus on creating a general framework for implementing an efficient QMS plan that can be easily adapted to other kind of services and markets.

Metal Oxide Nanomaterial QNAR Models: Available Structural Descriptors and Understanding of Toxicity Mechanisms

PubMed Central

Ying, Jiali; Zhang, Ting; Tang, Meng

2015-01-01

Metal oxide nanomaterials are widely used in various areas; however, the divergent published toxicology data makes it difficult to determine whether there is a risk associated with exposure to metal oxide nanomaterials. The application of quantitative structure activity relationship (QSAR) modeling in metal oxide nanomaterials toxicity studies can reduce the need for time-consuming and resource-intensive nanotoxicity tests. The nanostructure and inorganic composition of metal oxide nanomaterials makes this approach different from classical QSAR study; this review lists and classifies some structural descriptors, such as size, cation charge, and band gap energy, in recent metal oxide nanomaterials quantitative nanostructure activity relationship (QNAR) studies and discusses the mechanism of metal oxide nanomaterials toxicity based on these descriptors and traditional nanotoxicity tests. PMID:28347085

Tool for Rapid Analysis of Monte Carlo Simulations

NASA Technical Reports Server (NTRS)

Restrepo, Carolina; McCall, Kurt E.; Hurtado, John E.

2013-01-01

Designing a spacecraft, or any other complex engineering system, requires extensive simulation and analysis work. Oftentimes, the large amounts of simulation data generated are very difficult and time consuming to analyze, with the added risk of overlooking potentially critical problems in the design. The authors have developed a generic data analysis tool that can quickly sort through large data sets and point an analyst to the areas in the data set that cause specific types of failures. The first version of this tool was a serial code and the current version is a parallel code, which has greatly increased the analysis capabilities. This paper describes the new implementation of this analysis tool on a graphical processing unit, and presents analysis results for NASA's Orion Monte Carlo data to demonstrate its capabilities.

The use of market research to design healthcare offerings. A case study of a senior citizen community.

PubMed

Rummel, A; Francis, J; Duserick, F; Enke, E

1994-01-01

With a growing elderly population, there is little argument that the healthcare system in the United States must understand the needs and wants of its elderly consumers. This is especially important in a rural community where services can be limited and access to these services is difficult for consumers. Marketing research is one way in which rural healthcare facilities can gain market information not only to enhance their product offerings, but also to ensure that proper and sufficient services are provided. This article presents a case study of a long-term healthcare facility using marketing research.

Readability of consumer health information on the internet: a comparison of U.S. government-funded and commercially funded websites.

PubMed

Risoldi Cochrane, Zara; Gregory, Philip; Wilson, Amy

2012-01-01

The Internet has become an extremely prevalent means of communicating health information to consumers. Guidelines for selecting reliable health information websites give preference to U.S. government sites over commercially funded sites. However, these websites are not useful to consumers unless they are able to read and understand them. The authors' objective was to compare the readability of Internet health information intended for consumers found on U.S. government-funded websites versus that found on commercially funded websites. Consumer health websites were identified through a systematic Internet search. Webpages for 10 common health topics were extracted from each website. Readability of webpages was determined by 3 validated measures: Flesch Reading Ease, Flesch-Kincaid Reading Level, and SMOG Formula. Mean readability of government-funded and commercially funded websites was compared using the Mann-Whitney U test. Commercially funded websites were significantly more difficult to read as measured by Flesch Reading Ease (49.7 vs. 55.6 for government-funded sites, p = .002) and Flesch-Kincaid Reading Level (10.1 vs. 9.3, p = .012). There was no significant difference according to SMOG Formula (12.8 vs. 13.2, p = .150). The overall readability of Internet health information intended for consumers was poor. Efforts should be made to ensure that health information communicated via the Internet is easy for consumers to read and understand.

"A little information excites us." Consumer sensory experience of Vermont artisan cheese as active practice.

PubMed

Lahne, Jacob; Trubek, Amy B

2014-07-01

This research is concerned with explaining consumer preference for Vermont artisan cheese and the relationship between that preference and sensory experience. Artisan cheesemaking is increasingly an important part of Vermont's dairy sector, and this tracks a growing trend of artisan agricultural practice in the United States. In popular discourse and academic research into products like artisan cheese, consumers explain their preferences in terms of intrinsic sensory and extrinsic - supposedly nonsensory - food qualities. In laboratory sensory studies, however, the relationship between preference, intrinsic, and extrinsic qualities changes or disappears. In contrast, this study explains this relationship by adopting a social theory of sensory perception as a practice in everyday life. This theory is applied to a series of focus group interviews with Vermont artisan cheese consumers about their everyday perceptions. Based on the data, a conceptual framework for the sensory perception of Vermont artisan cheese is suggested: consumers combine information about producer practice, social context, and the materiality of the product through an active, learned practice of sensory perception. Particular qualities that drive consumer sensory experience and preference are identified from the interview data. Many of these qualities are difficult to categorize as entirely intrinsic or extrinsic, highlighting the need for developing new approaches of sensory evaluation in order to fully capture everyday consumer sensory perception. Thus, this research demonstrates that social theory provides new and valuable insights into consumer sensory preference for Vermont artisan cheese. Copyright © 2014 Elsevier Ltd. All rights reserved.

A questions-based investigation of consumer mental-health information.

PubMed

Crangle, Colleen E; Kart, Joyce Brothers

2015-01-01

Despite the wealth of mental-health information available online to consumers, research has shown that the mental-health information needs of consumers are not being met. This study contributes to that research by soliciting consumer questions directly, categorizing them, analyzing their form, and assessing the extent to which they can be answered from a trusted and vetted source of online information, namely the website of the US National Institute of Mental Health (NIMH). As an alternative to surveys and analyses of online activity, this study shows how consumer questions provide new insight into what consumers do not know and how they express their information needs. The study crowdsourced 100 consumer questions through Amazon Inc.'s Mechanical Turk. Categorization of the questions shows broad agreement with earlier studies in terms of the content of consumer questions. It also suggests that consumers' grasp of mental health issues may be low compared to other health topics. The majority of the questions (74%) were simple in form, with the remainder being multi-part, multifaceted or narrative. Even simple-form questions could, however, have complex interpretations. Fifty four questions were submitted to the search box at the NIMH website. For 32 questions, no answer could be found in the top one to three documents returned. Inadequacies in the search and retrieval technology deployed at websites account for some of the failure to find answers. The nature of consumer questions in mental health also plays a role. A question that has a false presupposition is less likely to have an answer in trusted and vetted sources of information. Consumer questions are also expressed with a degree of specificity that makes the retrieval of relevant information difficult. The significance of this study is that it shows what an analysis of consumer mental-health questions can tell us about consumer information needs and it provides new insight into the difficulties facing consumers looking for answers to their questions in online resources.

Radiofrequency identification: exploiting an old technology for measuring nurse time and motion.

PubMed

Jones, Terry L

2012-09-01

A national campaign is underway to increase the amount of time staff nurses spend at the bedside of hospitalized patients through redesign of the work environment. This kind of work redesign requires robust data depicting what nurses do and how they spend their time. Historically, these kinds of data have been difficult, costly, and time consuming to collect. Wireless capture of data on the movement of humans within the work environment (ie, time and motion) is now possible through radiofrequency identification technology. When small tracking devices the size of a quarter are affixed to their clothing, the movement of nurses throughout a patient care unit can be monitored. The duration and frequency of patient interaction are captured along with the duration of time spent in other locations of interest to include nurses' station, supply room, medication room, doctors' station, electronic documentation stations, family waiting rooms, and the hallway. Patterns of nurse movement and time allocation can be efficiently identified, and the effects of staffing practices, workflows, and unit layout evaluated. Integration of radiofrequency identification time and motion data with other databases enables nurse leaders to link nursing time to important cost and quality outcomes. Nurse leaders should explore the usefulness of radiofrequency identification technology in addressing data needs for nurse time and motion.

Evaluation of Emotional Responses to Television Advertising through Neuromarketing

ERIC Educational Resources Information Center

Baraybar-Fernánde, Antonio; Baños-González, Miguel; Barquero-Pérez, Óscar; Goya-Esteban, Rebeca; de-la-Morena-Gómez, Alexia

2017-01-01

Since the last century, we have witnessed a steady evolution of advertising techniques in an effort to adapt to the new social context in the market. As a strategic resource, Neuroscience brings a new perspective by allowing you to explore those difficult or verbally unconscious motives behind consumer behaviours. The present work aims to discover…

Health Information Retrieval Tool (HIRT)

PubMed Central

Nyun, Mra Thinzar; Ogunyemi, Omolola; Zeng, Qing

2002-01-01

The World Wide Web (WWW) is a powerful way to deliver on-line health information, but one major problem limits its value to consumers: content is highly distributed, while relevant and high quality information is often difficult to find. To address this issue, we experimented with an approach that utilizes three-dimensional anatomic models in conjunction with free-text search.

The ideal of consumer choice in social services: challenges with implementation in an Ontario injured worker vocational retraining programme.

PubMed

Maceachen, Ellen; Kosny, Agnieszka; Ferrier, Sue; Lippel, Katherine; Neilson, Cynthia; Franche, Renee-Louise; Pugliese, Diana

2013-01-01

Social service programmes that offer consumer choices are intended to guide service efficiency and customer satisfaction. However, little is known about how social service consumers actually make choices and how providers deliver such services. This article details the practical implementation of consumer choice in a Canadian workers' compensation vocational retraining programme. Discourse analysis was conducted of in-depth interviews and focus groups with 71 injured workers and service providers, who discussed their direct experience of a vocational retraining system. Data also included procedural, policy and administrative documents. Consumer choice included workers being offered choices about some service aspects, but not being able to exercise meaningful discretion. Programme cost objectives and restrictive rules and bureaucracy skewed the guidance provided to workers by service providers. If workers did not make the "right" choices, then the service providers were required to make choices for them. This upset workers and created tension for service providers. The ideal of consumer choice in a social service programme was difficult to enact, both for workers and service providers. Processes to increase quality of guidance to social service consumers and to create a systematic feedback look between system designers and consumers are recommended. Implications for Rehabilitation Consumer choice is an increasingly popular concept in social service systems. Vocational case managers can have their own administrative needs and tensions, which do not always align with the client's choices. Rehabilitation programmes need to have processes for considering what choices are important to clients and the resources to support them.

The role of health-related claims and health-related symbols in consumer behaviour: Design and conceptual framework of the CLYMBOL project and initial results.

PubMed

Hieke, S; Kuljanic, N; Wills, J M; Pravst, I; Kaur, A; Raats, M M; van Trijp, H C M; Verbeke, W; Grunert, K G

2015-03-01

Health claims and symbols are potential aids to help consumers identify foods that are healthier options. However, little is known as to how health claims and symbols are used by consumers in real-world shopping situations, thus making the science-based formulation of new labelling policies and the evaluation of existing ones difficult. The objective of the European Union-funded project R ole of health-related   CLaims   and   sYMBOLs   in consumer behaviour (CLYMBOL) is to determine how health-related information provided through claims and symbols, in their context, can affect consumer understanding, purchase and consumption. To do this, a wide range of qualitative and quantitative consumer research methods are being used, including product sampling, sorting studies ( i.e. how consumers categorise claims and symbols according to concepts such as familiarity and relevance), cross-country surveys, eye-tracking ( i.e. what consumers look at and for how long), laboratory and in-store experiments, structured interviews, as well as analysis of population panel data. EU Member States differ with regard to their history of use and regulation of health claims and symbols prior to the harmonisation of 2006. Findings to date indicate the need for more structured and harmonised research on the effects of health claims and symbols on consumer behaviour, particularly taking into account country-wide differences and individual characteristics such as motivation and ability to process health-related information. Based on the studies within CLYMBOL, implications and recommendations for stakeholders such as policymakers will be provided.

The role of health-related claims and health-related symbols in consumer behaviour: Design and conceptual framework of the CLYMBOL project and initial results

PubMed Central

Hieke, S; Kuljanic, N; Wills, J M; Pravst, I; Kaur, A; Raats, M M; van Trijp, H C M; Verbeke, W; Grunert, K G

2015-01-01

Health claims and symbols are potential aids to help consumers identify foods that are healthier options. However, little is known as to how health claims and symbols are used by consumers in real-world shopping situations, thus making the science-based formulation of new labelling policies and the evaluation of existing ones difficult. The objective of the European Union-funded project Role of health-related CLaims and sYMBOLs in consumer behaviour (CLYMBOL) is to determine how health-related information provided through claims and symbols, in their context, can affect consumer understanding, purchase and consumption. To do this, a wide range of qualitative and quantitative consumer research methods are being used, including product sampling, sorting studies (i.e. how consumers categorise claims and symbols according to concepts such as familiarity and relevance), cross-country surveys, eye-tracking (i.e. what consumers look at and for how long), laboratory and in-store experiments, structured interviews, as well as analysis of population panel data. EU Member States differ with regard to their history of use and regulation of health claims and symbols prior to the harmonisation of 2006. Findings to date indicate the need for more structured and harmonised research on the effects of health claims and symbols on consumer behaviour, particularly taking into account country-wide differences and individual characteristics such as motivation and ability to process health-related information. Based on the studies within CLYMBOL, implications and recommendations for stakeholders such as policymakers will be provided. PMID:25750587

[Flashback following use of cannabis--a review].

PubMed

Fischer, J; Täschner, K L

1991-11-01

The present study tries to find an answer to the question, whether the consumption of cannabis can cause flashbacks, and, if so, under what circumstances they occur. This is of interest for the treatment, prognosis and also from the legal viewpoint. The definition of a flashback is often unclear. Empirical investigations are often not sufficiently comparable, the supplementary data are very often missing, making the evaluation of the results difficult. Self-diagnosis by the consumer is usually unsuitable for estimating the frequency and phenomenology of flashbacks. Cannabis may trigger flashbacks after consuming hallucinogenes; the probability of the occurrence of a flashback seems to increase with the amount of hallucinogenes a person has consumed. A definite correlation between the amount of hashish consumed and the occurrence of flashback does not exist. Flashbacks have also been reported after consuming cannabis alone. However, data vary regarding the frequency of such flashbacks. According to the available data they occur rarely and require a thorough differential diagnostic evaluation in each individual case. As a rule, the occurrence of a flashback may take place in cases where there is an intake of hallucinogenic drugs in the recent case history.

Consumer satisfaction with a rehabilitation mobile outreach program.

PubMed

Wilson, K G; Crupi, C D; Greene, G; Gaulin-Jones, B; Dehoux, E; Korol, C T

1995-10-01

Accessibility to rehabilitation services is often difficult for people with disabilities who live in rural areas. This study examined consumer satisfaction with a rehabilitation outreach approach that utilizes a mobile clinic to provide consultation services. The descriptive survey took place in fifteen rural communities in eastern and northeastern Ontario, Canada. Valid postconsultation mail surveys were completed by 143 consecutive patients with mixed diagnoses (or proxy family members) who had been seen during mobile clinic visits to their home communities (85.1% of patients approached). There were 59 men and 84 women, with an average age of 58.7 years. The main outcome measure was a consumer satisfaction scale. A high level of global satisfaction was reported, with 97.2% of respondents reporting a preference for community outreach over the alternative of traveling to an urban rehabilitation center. Enhanced accessibility was considered to be the major advantage of the outreach program, but concerns about the continuity of care were also expressed. Providing interdisciplinary rehabilitation consultation services on an outreach basis is associated with a high level of consumer satisfaction. From a consumer perspective, the outreach approach seems to be a viable way of addressing some of the rehabilitation needs of rural people with disabilities.

Measures of food intake in mantled howling monkeys.

PubMed

Reynoso-Cruz, José Eduardo; Rangel-Negrín, Ariadna; Coyohua-Fuentes, Alejandro; Canales-Espinosa, Domingo; Dias, Pedro Américo D

2016-04-01

Food intake (i.e., the amount of food consumed by an individual) is a crucial measure for studying feeding behavior, but its measurement requires high visibility of individuals and long recording sessions, which are often difficult to accomplish under field conditions. As a consequence, studies on the feeding behavior of primates typically do not estimate food intake directly, and focus rather on studying dietary patterns through indirect measures of food intake, such as time spent feeding, number of food bites and food intake rates. The aim of the present study was to determine the validity of these estimators of food intake in mantled howling monkeys (Alouatta palliata) by comparing the estimations with the direct measurement of food intake. We recorded 97 feeding episodes of two male and two female adults, during which we determined the number of ingested food units (i.e., number of leaves and number of fruits), the number of bites taken and time spent feeding. After weighing units of food similar to those consumed, we calculated food intake and mean intake rates per food type (ripe fruits, unripe fruits, mature leaves, and young leaves). The number of bites taken by mantled howling monkeys during feeding episodes was strongly related to food intake, and this relationship was not affected by the type of food ingested. In contrast, neither time spent feeding nor food ingestion rate were related to food intake. These results suggest that the number of bites could be used as a valid proxy to study food intake in this species, whereas the other two measures are likely to yield inaccurate estimates of food intake.

The future of time and frequency dissemination

NASA Astrophysics Data System (ADS)

Levine, Judah

1994-05-01

I will try to extrapolate the changes in the dissemination of time and frequency information that have taken place during the last 25 years to predict the future developments both in the methods of disseminating time and frequency and in the kinds of customers we will be asked to serve. Two important developments are likely to play pivotal roles in driving the evolution of dissemination. The first is the commercial availability of very high quality clocks -- devices whose performance may eventually rival that of the current generation of primary frequency standards. The widespread use of these devices may blur the traditional distinction between client and server, and may replace it with a more symmetrical interchange of data among peers. The second is the increasing demand for digital time and frequency information driven by the increasing sophistication of everything from traffic lights to electric power meters. The needs of these individual users may not tax the state of the art of primary frequency standards in principle, but their large numbers and wide geographical distribution present a technological challenge that is difficult to meet at a reasonable price using existing methods. Some of these problems may be solved (or at least addressed) using developments in communications and consumer electronics such as the increasing use of fiber-optic telephone circuits and the increasing bandwidth and sophistication of the cable network used to transmit television pictures. To be useful, these advances in hardware must stimulate parallel advances in software algorithms and methods. These advances are more difficult to predict with great confidence, but the developments of the last few years will be examined to provide some indications of the future.

The future of time and frequency dissemination

NASA Technical Reports Server (NTRS)

Levine, Judah

1994-01-01

I will try to extrapolate the changes in the dissemination of time and frequency information that have taken place during the last 25 years to predict the future developments both in the methods of disseminating time and frequency and in the kinds of customers we will be asked to serve. Two important developments are likely to play pivotal roles in driving the evolution of dissemination. The first is the commercial availability of very high quality clocks -- devices whose performance may eventually rival that of the current generation of primary frequency standards. The widespread use of these devices may blur the traditional distinction between client and server, and may replace it with a more symmetrical interchange of data among peers. The second is the increasing demand for digital time and frequency information driven by the increasing sophistication of everything from traffic lights to electric power meters. The needs of these individual users may not tax the state of the art of primary frequency standards in principle, but their large numbers and wide geographical distribution present a technological challenge that is difficult to meet at a reasonable price using existing methods. Some of these problems may be solved (or at least addressed) using developments in communications and consumer electronics such as the increasing use of fiber-optic telephone circuits and the increasing bandwidth and sophistication of the cable network used to transmit television pictures. To be useful, these advances in hardware must stimulate parallel advances in software algorithms and methods. These advances are more difficult to predict with great confidence, but the developments of the last few years will be examined to provide some indications of the future.

Global phenological insensitivity to shifting ocean temperatures among seabirds

NASA Astrophysics Data System (ADS)

Keogan, Katharine; Daunt, Francis; Wanless, Sarah; Phillips, Richard A.; Walling, Craig A.; Agnew, Philippa; Ainley, David G.; Anker-Nilssen, Tycho; Ballard, Grant; Barrett, Robert T.; Barton, Kerry J.; Bech, Claus; Becker, Peter; Berglund, Per-Arvid; Bollache, Loïc; Bond, Alexander L.; Bouwhuis, Sandra; Bradley, Russell W.; Burr, Zofia M.; Camphuysen, Kees; Catry, Paulo; Chiaradia, Andre; Christensen-Dalsgaard, Signe; Cuthbert, Richard; Dehnhard, Nina; Descamps, Sébastien; Diamond, Tony; Divoky, George; Drummond, Hugh; Dugger, Katie M.; Dunn, Michael J.; Emmerson, Louise; Erikstad, Kjell Einar; Fort, Jérôme; Fraser, William; Genovart, Meritxell; Gilg, Olivier; González-Solís, Jacob; Granadeiro, José Pedro; Grémillet, David; Hansen, Jannik; Hanssen, Sveinn A.; Harris, Mike; Hedd, April; Hinke, Jefferson; Igual, José Manuel; Jahncke, Jaime; Jones, Ian; Kappes, Peter J.; Lang, Johannes; Langset, Magdalene; Lescroël, Amélie; Lorentsen, Svein-Hâkon; Lyver, Phil O'B.; Mallory, Mark; Moe, Børge; Montevecchi, William A.; Monticelli, David; Mostello, Carolyn; Newell, Mark; Nicholson, Lisa; Nisbet, Ian; Olsson, Olof; Oro, Daniel; Pattison, Vivian; Poisbleau, Maud; Pyk, Tanya; Quintana, Flavio; Ramos, Jaime A.; Ramos, Raül; Reiertsen, Tone Kirstin; Rodríguez, Cristina; Ryan, Peter; Sanz-Aguilar, Ana; Schmidt, Niels M.; Shannon, Paula; Sittler, Benoit; Southwell, Colin; Surman, Christopher; Svagelj, Walter S.; Trivelpiece, Wayne; Warzybok, Pete; Watanuki, Yutaka; Weimerskirch, Henri; Wilson, Peter R.; Wood, Andrew G.; Phillimore, Albert B.; Lewis, Sue

2018-04-01

Reproductive timing in many taxa plays a key role in determining breeding productivity1, and is often sensitive to climatic conditions2. Current climate change may alter the timing of breeding at different rates across trophic levels, potentially resulting in temporal mismatch between the resource requirements of predators and their prey3. This is of particular concern for higher-trophic-level organisms, whose longer generation times confer a lower rate of evolutionary rescue than primary producers or consumers4. However, the disconnection between studies of ecological change in marine systems makes it difficult to detect general changes in the timing of reproduction5. Here, we use a comprehensive meta-analysis of 209 phenological time series from 145 breeding populations to show that, on average, seabird populations worldwide have not adjusted their breeding seasons over time (-0.020 days yr-1) or in response to sea surface temperature (SST) (-0.272 days °C-1) between 1952 and 2015. However, marked between-year variation in timing observed in resident species and some Pelecaniformes and Suliformes (cormorants, gannets and boobies) may imply that timing, in some cases, is affected by unmeasured environmental conditions. This limited temperature-mediated plasticity of reproductive timing in seabirds potentially makes these top predators highly vulnerable to future mismatch with lower-trophic-level resources2.

Radiofrequency Identification

PubMed Central

Jones, Terry L.

2017-01-01

A national campaign is underway to increase the amount of time staff nurses spend at the bedside of hospitalized patients through redesign of the work environment. This kind of work redesign requires robust data depicting what nurses do and how they spend their time. Historically, these kinds of data have been difficult, costly, and time consuming to collect. Wireless capture of data on the movement of humans within the work environment (ie, time and motion) is now possible through radiofrequency identification technology. When small tracking devices the size of a quarter are affixed to their clothing, the movement of nurses throughout a patient care unit can be monitored. The duration and frequency of patient interaction are captured along with the duration of time spent in other locations of interest to include nurses’ station, supply room, medication room, doctors’ station, electronic documentation stations, family waiting rooms, and the hallway. Patterns of nurse movement and time allocation can be efficiently identified, and the effects of staffing practices, workflows, and unit layout evaluated. Integration of radiofrequency identification time and motion data with other databases enables nurse leaders to link nursing time to important cost and quality outcomes. Nurse leaders should explore the usefulness of radiofrequency identification technology in addressing data needs for nurse time and motion. PMID:22592451

Local practice and global data: loyalty cards, social practices, and consumer surveillance.

PubMed

Zurawski, Nils

2011-01-01

Monitoring of consumers has become the most widespread mode of surveillance today. Being a multi-billion dollar business, the collected data are traded globally without much concern by the consumers themselves. Loyalty cards are an element with which such data are collected. Analyzing the role of loyalty cards in everyday practices such as shopping, I discuss how new modes of surveillance evolve and work and why they eventually make communication about data protection a difficult matter. Further, I will propose an alternative approach to the study of surveillance. This approach is concerned with local practices, focusing on subjective narratives in order to view surveillance as an integral part of culturally or socially manifested contexts and actions and not to view surveillance as something alien to society and human interaction. This will open up other possibilities to study modes of subjectivity or how individuals situate themselves within society.

A questions-based investigation of consumer mental-health information

PubMed Central

Kart, Joyce Brothers

2015-01-01

Despite the wealth of mental-health information available online to consumers, research has shown that the mental-health information needs of consumers are not being met. This study contributes to that research by soliciting consumer questions directly, categorizing them, analyzing their form, and assessing the extent to which they can be answered from a trusted and vetted source of online information, namely the website of the US National Institute of Mental Health (NIMH). As an alternative to surveys and analyses of online activity, this study shows how consumer questions provide new insight into what consumers do not know and how they express their information needs. The study crowdsourced 100 consumer questions through Amazon Inc.’s Mechanical Turk. Categorization of the questions shows broad agreement with earlier studies in terms of the content of consumer questions. It also suggests that consumers’ grasp of mental health issues may be low compared to other health topics. The majority of the questions (74%) were simple in form, with the remainder being multi-part, multifaceted or narrative. Even simple-form questions could, however, have complex interpretations. Fifty four questions were submitted to the search box at the NIMH website. For 32 questions, no answer could be found in the top one to three documents returned. Inadequacies in the search and retrieval technology deployed at websites account for some of the failure to find answers. The nature of consumer questions in mental health also plays a role. A question that has a false presupposition is less likely to have an answer in trusted and vetted sources of information. Consumer questions are also expressed with a degree of specificity that makes the retrieval of relevant information difficult. The significance of this study is that it shows what an analysis of consumer mental-health questions can tell us about consumer information needs and it provides new insight into the difficulties facing consumers looking for answers to their questions in online resources. PMID:25870768

Energy conservation in two wheeler head tube welding fixture by modeling

NASA Astrophysics Data System (ADS)

Kamalanathan, S.; Guruprasad, B.; Elango, A.

2018-05-01

Energy conservation in automotive industry plays a significant role to increase the productivity which reduces the Men, Material, and Machinery. The Automotive industry sector is one of the major sector which works in two or more times of loading of work pieces in welding fixture. It consumes more energy. This project focuses on reduce the energy consumption by applying single time loading of work pieces with minimum number of labours, machine and reduces scrap. Welding fixtures are designed for the components which are difficult to weld in normal way or without any holding unit. The fixture is to be designed for the two wheeler head tube assembly which is to be welded with its companion for its application. It is demonstrated by modelling in Uni-graphics Software and FEA analysis will be done by ANSYS and experimentally products are tested and execute in industry. A code of practice suggested establishing acceptable standard for energy used in Automotive industry.

Autonomous Decentralized Voltage Profile Control of Super Distributed Energy System using Multi-agent Technology

NASA Astrophysics Data System (ADS)

Tsuji, Takao; Hara, Ryoichi; Oyama, Tsutomu; Yasuda, Keiichiro

A super distributed energy system is a future energy system in which the large part of its demand is fed by a huge number of distributed generators. At one time some nodes in the super distributed energy system behave as load, however, at other times they behave as generator - the characteristic of each node depends on the customers' decision. In such situation, it is very difficult to regulate voltage profile over the system due to the complexity of power flows. This paper proposes a novel control method of distributed generators that can achieve the autonomous decentralized voltage profile regulation by using multi-agent technology. The proposed multi-agent system employs two types of agent; a control agent and a mobile agent. Control agents generate or consume reactive power to regulate the voltage profile of neighboring nodes and mobile agents transmit the information necessary for VQ-control among the control agents. The proposed control method is tested through numerical simulations.

Dendrometer bands made easy: Using modified cable ties to measure incremental growth of trees1

PubMed Central

Anemaet, Evelyn R.; Middleton, Beth A.

2013-01-01

• Premise of the study: Dendrometer bands are a useful way to make sequential repeated measurements of tree growth, but traditional dendrometer bands can be expensive, time consuming, and difficult to construct in the field. An alternative to the traditional method of band construction is to adapt commercially available materials. This paper describes how to construct and install dendrometer bands using smooth-edged, stainless steel, cable tie banding and attachable rollerball heads. • Methods and Results: As a performance comparison, both traditional and cable tie dendrometer bands were installed on baldcypress trees at the National Wetlands Research Center in Lafayette, Louisiana, by both an experienced and a novice worker. Band installation times were recorded, and growth of the trees as estimated by the two band types was measured after approximately one year, demonstrating equivalence of the two methods. • Conclusions: This efficient approach to dendrometer band construction can help advance the knowledge of long-term tree growth in ecological studies. PMID:25202589

Clay-cement suspensions - rheological and functional properties

NASA Astrophysics Data System (ADS)

Wojcik, L.; Izak, P.; Mastalska-Poplawska, J.; Gajek, M.

2017-01-01

The piping erosion in soil is highly unexpected in civil engineering. Elimination of such damages is difficult, expensive and time-consuming. One of the possibility is the grouting method. This method is still developed into direction of process automation as well as other useful properties of suspensions. Main way of modernization of the grouting method is connected it with rheology of injection and eventuality of fitting them to specific problems conditions. Very popular and useful became binders based on modified clays (clay-cement suspensions). Important principle of efficiency of the grouting method is using of time-dependent pseudothixotropic properties of the clay-cement suspensions. The pseudo-rheounstability aspect of the suspensions properties should be dedicated and fitted to dynamic changes of soil conditions destructions. Whole process of the modification of the suspension rheology is stimulated by the specific agents. This article contains a description of practical aspects of the rheological parameters managing of the clay-cement suspensions, dedicated to the building damages, hydrotechnic constructions etc.

Computer Controlled Optical Surfacing With Orbital Tool Motion

NASA Astrophysics Data System (ADS)

Jones, Robert A.

1985-10-01

Asymmetric aspheric optical surfaces are very difficult to fabricate using classical techniques and laps the same size as the workpiece. Opticians can produce such surfaces by grinding and polishing, using small laps with orbital tool motion. However, hand correction is a time consuming process unsuitable for large optical elements. Itek has developed Computer Controlled Optical Surfacing (CCOS) for fabricating such aspheric optics. Automated equipment moves a nonrotating orbiting tool slowly over the workpiece surface. The process corrects low frequency surface errors by figuring. The velocity of the tool assembly over the workpiece surface is purposely varied. Since the amount of material removal is proportional to the polishing or grinding time, accurate control over material removal is achieved. The removal of middle and high frequency surface errors is accomplished by pad smoothing. For a soft pad material, the pad will compress to fit the workpiece surface producing greater pressure and more removal at the surface high areas. A harder pad will ride on only the high regions resulting in removal only for those locations.

Cognitive task analysis and innovation of training: the case of structured troubleshooting.

PubMed

Schaafstal, A; Schraagen, J M; van Berlo, M

2000-01-01

Troubleshooting is often a time-consuming and difficult activity. The question of how the training of novice technicians can be improved was the starting point of the research described in this article. A cognitive task analysis was carried out consisting of two preliminary observational studies on troubleshooting in naturalistic settings, combined with an interpretation of the data obtained in the context of the existing literature. On the basis of this cognitive task analysis, a new method for the training of troubleshooting was developed (structured troubleshooting), which combines a domain-independent strategy for troubleshooting with a context-dependent, multiple-level, functional decomposition of systems. This method has been systematically evaluated for its use in training. The results show that technicians trained in structured troubleshooting solve twice as many malfunctions, in less time, than those trained in the traditional way. Moreover, structured troubleshooting can be taught in less time than can traditional troubleshooting. Finally, technicians learn to troubleshoot in an explicit and uniform way. These advantages of structured troubleshooting ultimately lead to a reduction in training and troubleshooting costs.

HOROPLAN: computer-assisted nurse scheduling using constraint-based programming.

PubMed

Darmoni, S J; Fajner, A; Mahé, N; Leforestier, A; Vondracek, M; Stelian, O; Baldenweck, M

1995-01-01

Nurse scheduling is a difficult and time consuming task. The schedule has to determine the day to day shift assignments of each nurse for a specified period of time in a way that satisfies the given requirements as much as possible, taking into account the wishes of nurses as closely as possible. This paper presents a constraint-based, artificial intelligence approach by describing a prototype implementation developed with the Charme language and the first results of its use in the Rouen University Hospital. Horoplan implements a non-cyclical constraint-based scheduling, using some heuristics. Four levels of constraints were defined to give a maximum of flexibility: French level (e.g. number of worked hours in a year), hospital level (e.g. specific day-off), department level (e.g. specific shift) and care unit level (e.g. specific pattern for week-ends). Some constraints must always be verified and can not be overruled and some constraints can be overruled at a certain cost. Rescheduling is possible at any time specially in case of an unscheduled absence.

Optimal de novo design of MRM experiments for rapid assay development in targeted proteomics.

PubMed

Bertsch, Andreas; Jung, Stephan; Zerck, Alexandra; Pfeifer, Nico; Nahnsen, Sven; Henneges, Carsten; Nordheim, Alfred; Kohlbacher, Oliver

2010-05-07

Targeted proteomic approaches such as multiple reaction monitoring (MRM) overcome problems associated with classical shotgun mass spectrometry experiments. Developing MRM quantitation assays can be time consuming, because relevant peptide representatives of the proteins must be found and their retention time and the product ions must be determined. Given the transitions, hundreds to thousands of them can be scheduled into one experiment run. However, it is difficult to select which of the transitions should be included into a measurement. We present a novel algorithm that allows the construction of MRM assays from the sequence of the targeted proteins alone. This enables the rapid development of targeted MRM experiments without large libraries of transitions or peptide spectra. The approach relies on combinatorial optimization in combination with machine learning techniques to predict proteotypicity, retention time, and fragmentation of peptides. The resulting potential transitions are scheduled optimally by solving an integer linear program. We demonstrate that fully automated construction of MRM experiments from protein sequences alone is possible and over 80% coverage of the targeted proteins can be achieved without further optimization of the assay.

Development of a Real-Time Reverse Transcription-PCR Assay for Global Differentiation of Yellow Fever Virus Vaccine-Related Adverse Events from Natural Infections.

PubMed

Hughes, Holly R; Russell, Brandy J; Mossel, Eric C; Kayiwa, John; Lutwama, Julius; Lambert, Amy J

2018-06-01

Yellow fever (YF) is a reemerging public health threat, with frequent outbreaks prompting large vaccination campaigns in regions of endemicity in Africa and South America. Specific detection of vaccine-related adverse events is resource-intensive, time-consuming, and difficult to achieve during an outbreak. To address this, we have developed a highly transferable rapid yellow fever virus (YFV) vaccine-specific real-time reverse transcription-PCR (RT-PCR) assay that distinguishes vaccine from wild-type lineages. The assay utilizes a specific hydrolysis probe that includes locked nucleic acids to enhance specific discrimination of the YFV17D vaccine strain genome. Promisingly, sensitivity and specificity analyses reveal this assay to be highly specific to vaccine strain(s) when tested on clinical samples and YFV cell culture isolates of global origin. Taken together, our data suggest the utility of this assay for use in laboratories of varied capacity for the identification and differentiation of vaccine-related adverse events from wild-type infections of both African and South American origin. Copyright © 2018 American Society for Microbiology.

The Gellyfish: An In-Situ Equilibrium-Based Sampler for Determining Multiple Free Metal Ion Concentrations in Marine Ecosystems

PubMed Central

Dong, Zhao; Lewis, Christopher G.; Burgess, Robert M.; Shine, James P.

2016-01-01

Free metal ions are usually the most bioavailable and toxic metal species to aquatic organisms, but they are difficult to measure due to their extremely low concentrations in the marine environment. Many of the current methods for determining free metal ions are complicated, time-consuming, and can only measure one metal at a time. We developed a new version of the ‘Gellyfish’, an in-situ equilibrium-based sampler, with significantly reduced equilibration time and the capability of measuring multiple free metal ions simultaneously. By calibrating the Gellyfish to account for its uptake of cationic metal complexes and validating them in multi-metal competition experiments, we were able to determine free metal ion concentrations previously collected over ten months at five locations in Boston Harbor for Cu, Zn, Pb, Ni, and Cd. This work generated one of the largest free metal ion datasets and demonstrated the applicability of the Gellyfish as an easy-to-use and inexpensive tool for monitoring free ion concentrations of metal mixtures in marine ecosystems. PMID:25598362

MRR and TWR evaluation on electrical discharge machining of Ti-6Al-4V using tungsten : copper composite electrode

NASA Astrophysics Data System (ADS)

Prasanna, J.; Rajamanickam, S.; Amith Kumar, O.; Karthick Raj, G.; Sathya Narayanan, P. V. V.

2017-05-01

In this paper Ti-6Al-4V used as workpiece material and it is keenly seen in variety of field including medical, chemical, marine, automotive, aerospace, aviation, electronic industries, nuclear reactor, consumer products etc., The conventional machining of Ti-6Al-4V is very difficult due to its distinctive properties. The Electrical Discharge Machining (EDM) is right choice of machining this material. The tungsten copper composite material is employed as tool material. The gap voltage, peak current, pulse on time and duty factor is considered as the machining parameter to analyze the machining characteristics Material Removal Rate (MRR) and Tool Wear Rate (TWR). The Taguchi method is provided to work for finding the significant parameter of EDM. It is found that for MRR significant parameters rated in the following order Gap Voltage, Pulse On-Time, Peak Current and Duty Factor. On the other hand for TWR significant parameters are listed in line of Gap Voltage, Duty Factor, Peak Current and Pulse On-Time.

Simulating variable source problems via post processing of individual particle tallies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bleuel, D.L.; Donahue, R.J.; Ludewigt, B.A.

2000-10-20

Monte Carlo is an extremely powerful method of simulating complex, three dimensional environments without excessive problem simplification. However, it is often time consuming to simulate models in which the source can be highly varied. Similarly difficult are optimization studies involving sources in which many input parameters are variable, such as particle energy, angle, and spatial distribution. Such studies are often approached using brute force methods or intelligent guesswork. One field in which these problems are often encountered is accelerator-driven Boron Neutron Capture Therapy (BNCT) for the treatment of cancers. Solving the reverse problem of determining the best neutron source formore » optimal BNCT treatment can be accomplished by separating the time-consuming particle-tracking process of a full Monte Carlo simulation from the calculation of the source weighting factors which is typically performed at the beginning of a Monte Carlo simulation. By post-processing these weighting factors on a recorded file of individual particle tally information, the effect of changing source variables can be realized in a matter of seconds, instead of requiring hours or days for additional complete simulations. By intelligent source biasing, any number of different source distributions can be calculated quickly from a single Monte Carlo simulation. The source description can be treated as variable and the effect of changing multiple interdependent source variables on the problem's solution can be determined. Though the focus of this study is on BNCT applications, this procedure may be applicable to any problem that involves a variable source.« less

Evaluation of a medicines list iPhone app.

PubMed

Wickham, Brendon; Holbrook, Rachel; Dinh, Kathryn

2013-01-01

A medicines list iPhone app, based on an existing paper product, was developed by NPS MedicineWise for consumers. Since its launch in June 2011 the app has been downloaded over 19,000 times. With plans to expand its development and increase its use, it was critical to discover how the app is used and how useful it is. A total of 61 study participants used the app for five days and then participated in online focus groups. While most people have a system for managing their medicines, these systems vary in their effectiveness. The biggest problem with managing medicines is when medicine doses are forgotten or taken late. Usability problems with the app were revealed. While the app was easy to install, it was time consuming and difficult to input medicine information. The majority of people did not enter information in all fields. While the app was deemed useful and will continue to be used by the majority of participants, not all participants were aware of the existing functions or the capabilities of the functions. Use was primarily for self-management. The majority of participants were comfortable sharing the information in the app (via the phone) with a health professional. Roughly half wanted to upload their information to the PCEHR. Recommendations were made and incorporated into design decisions for an updated version of the app (which includes potential linking to the PCEHR), and a multi-platform release (web, iOS, Android, Windows Mobile).

Microbiological Spoilage of Eggs and Egg Products

NASA Astrophysics Data System (ADS)

Shebuski, Joseph R.; Freier, Timothy A.

Chicken eggs are the eggs most commonly consumed by humans. The US per capita consumption was 255 eggs in 2005. Approximately 77 billion eggs were produced in the USA in 2005 (American Egg Board, 2005). Of these about 30% were further processed in some manner and the remainder were consumed as whole shell eggs. The greatest increase in production and consumption of eggs, however, is in the developing countries. China is now the number one producer of eggs, with the USA second, and India third. In fact, developing countries currently have >67% of the global egg production share (Clark, 2007). Only a small percentage of eggs are exported because shell eggs are relatively difficult to transport.

[Light protection: principles of UV protection].

PubMed

Stege, H; Mang, R

2006-05-01

UV radiation is responsible for the induction of epithelial and melanocytic skin cancer, photoaging, and photodermatoses. UV protection is necessary to prevent damage caused by non-physiologic exposure. UV protection includes not only reduction of sun exposure but also use of sun protective filters, UV protective clothes, DNA repair enzymes, and antioxidant supplementation. Consumers are uncertain about the possibilities and limitations of commercial sun protection measures. Dermatologists must explain protective measures to the general public which continues to believe that UV-tanned skin is healthy. The sunscreen market is a highly competitive but lucrative market. The range of products with different designations and promises makes difficult for both consumers and dermatologists to determine what is sensible UV protection.

The Effect of a Multicomponent Professional Development Training on the Beliefs and Behaviors of Community Health Educators Concerning Food Irradiation

ERIC Educational Resources Information Center

Thompson, Britta M.; Knight, Stephanie L.

2006-01-01

Beliefs have a significant effect on the health behaviors of individuals and educators; however, they can be difficult to change. The purpose of this study was to determine if exposing community health educators, specifically family and consumer sciences county extension educators, to a multicomponent professional development training on food…

The Rise and Fall of the Graduation Rate

ERIC Educational Resources Information Center

Selingo, Jeff

2012-01-01

A college's graduation rate is such a basic consumer fact for would-be students these days that it's difficult to imagine that the federal government didn't even collect the information as recently as the early 1990s. If not for two former Olympic basketball players who made their way to Congress and wanted college athletes to know about their…

The interplay between customer participation and difficulty of design examples in the online designing process and its effect on customer satisfaction: mediational analyses.

PubMed

Chang, Chia-Chi; Chen, Hui-Yun; Huang, I-Chiang

2009-04-01

In the current consumer-centric economy, consumers increasingly desire the opportunity to design their own products in order to express more effectively their self-image. Mass customization, based on efficient and flexible modulization designs, has provided individualized products to satisfy this desire. This work presents an experiment employed to demonstrate that customer participation leads to higher satisfaction. Specifically, the increment in customer satisfaction due to participation is greater when an easy example is provided than when either no example or a difficult one is provided. Additionally, self-congruity plays a mediating role on the customer participation-satisfaction relationship, and this mediating effect varies across different levels of the design example provided in the design process. When an easy design example is present, customer participation has a direct effect on satisfaction, in addition to the indirect effect of self-congruity. When a difficult example is provided, customer participation does not have incremental effects on either self-congruity or customer satisfaction. Finally, when no design example is shown to customers, contrary to our expectation, participation still enhances customer satisfaction due to an increased sense of self-congruity.

Qualitative and quantitative composition of essential oils: A literature-based database on contact allergens used for safety assessment.

PubMed

Dornic, N; Ficheux, A S; Roudot, A C

2016-10-01

The risks related to the use of essential oils are difficult to ascertain at present, due in part to the large number of different oils available on the market, making it difficult for the risk assessor. Essential oils may contain skin allergens in significant amounts, and could thus pose a risk to the consumer. The aim of our study was to collect as much qualitative and quantitative data as possible on allergens present in essential oils. 11 types of essential oils, with 25 respective subspecies, were taken into account based on a previous survey. Based on the literature, 517 dosages were recorded from 112 publications, providing precious information for probabilistic exposure assessment purposes. 22 substances recognized as established allergens were found in the essential oils we included. Of these, 11 are also found in cosmetics as fragrance components. These results are of major importance regarding co-exposure to fragrance allergens. Moreover, this could lead to regulatory measures for essential oils in the future, as it is the case for cosmetic products, in order to better protect consumers against skin allergy. Copyright © 2016 Elsevier Inc. All rights reserved.

Assessing the robustness of quantitative fatty acid signature analysis to assumption violations

USGS Publications Warehouse

Bromaghin, Jeffrey F.; Budge, Suzanne M.; Thiemann, Gregory W.; Rode, Karyn D.

2016-01-01

In most QFASA applications, investigators will generally have some knowledge of the prey available to predators and be able to assess the completeness of prey signature data and sample additional prey as necessary. Conversely, because calibration coefficients are derived from feeding trials with captive animals and their values may be sensitive to consumer physiology and nutritional status, their applicability to free-ranging animals is difficult to establish. We therefore recommend that investigators first make any improvements to the prey signature data that seem warranted and then base estimation on the Aitchison distance measure, as it appears to minimize risk from violations of the assumption that is most difficult to verify.

Crystal plasticity modeling of β phase deformation in Ti-6Al-4V

NASA Astrophysics Data System (ADS)

Moore, John A.; Barton, Nathan R.; Florando, Jeff; Mulay, Rupalee; Kumar, Mukul

2017-10-01

Ti-6Al-4V is an alloy of titanium that dominates titanium usage in applications ranging from mass-produced consumer goods to high-end aerospace parts. The material’s structure on a microscale is known to affect its mechanical properties but these effects are not fully understood. Specifically, this work will address the effects of low volume fraction intergranular β phase on Ti-6Al-4V’s mechanical response during the transition from elastic to plastic deformation. A crystal plasticity-based finite element model is used to fully resolve the deformation of the β phase for the first time. This high fidelity model captures mechanisms difficult to access via experiments or lower fidelity models. The results are used to assess lower fidelity modeling assumptions and identify phenomena that have ramifications for failure of the material.

Predict ephemeral and perennial range quantity and quality during normal grazing season. [Arizona, California, Oregon, and Alaska

NASA Technical Reports Server (NTRS)

Bentley, R. G., Jr. (Principal Investigator)

1974-01-01

The author has identified the following significant results. Collection and update of resource inventory data has historically been a difficult, time consuming task. Accurate resource data is necessary as a basis for wise management decisions made by a resource management agency such as the Bureau of Land Management. Black and white and color infrared composites of ERTS satellite imagery at 1:1,000,000 and enlarged scales can be used as data gathering tools. No investment in expensive sophisticated equipment is necessary. A photointerpreter can map boundaries of soils, plant communities, levels of forage production, areas revegetated by man, and areas burned by wildlife directly from satellite imagery. The ERTS system of producing and distributing imagery must be improved greatly before satellite imagery can be useful to the resource manager.

Green Aspects of Techniques for the Determination of Currently Used Pesticides in Environmental Samples

PubMed Central

Stocka, Jolanta; Tankiewicz, Maciej; Biziuk, Marek; Namieśnik, Jacek

2011-01-01

Pesticides are among the most dangerous environmental pollutants because of their stability, mobility and long-term effects on living organisms. Their presence in the environment is a particular danger. It is therefore crucial to monitor pesticide residues using all available analytical methods. The analysis of environmental samples for the presence of pesticides is very difficult: the processes involved in sample preparation are labor-intensive and time-consuming. To date, it has been standard practice to use large quantities of organic solvents in the sample preparation process; but as these solvents are themselves hazardous, solvent-less and solvent-minimized techniques are becoming popular. The application of Green Chemistry principles to sample preparation is primarily leading to the miniaturization of procedures and the use of solvent-less techniques, and these are discussed in the paper. PMID:22174632

Evaluation of two methods for direct detection of Fusarium spp. in water.

PubMed

Graça, Mariana G; van der Heijden, Inneke M; Perdigão, Lauro; Taira, Cleison; Costa, Silvia F; Levin, Anna S

2016-04-01

Fusarium is a waterborne fungus that causes severe infections especially in patients with prolonged neutropenia. Traditionally, the detection of Fusarium in water is done by culturing which is difficult and time consuming. A faster method is necessary to prevent exposure of susceptible patients to contaminated water. The objective of this study was to develop a molecular technique for direct detection of Fusarium in water. A direct DNA extraction method from water was developed and coupled to a genus-specific PCR, to detect 3 species of Fusarium (verticillioides, oxysporum and solani). The detection limits were 10 cells/L and 1 cell/L for the molecular and culture methods, respectively. To our knowledge, this is the first method developed to detect Fusarium directly from water. Copyright © 2016 Elsevier B.V. All rights reserved.

The Fermilab ISDN Pilot Project: Experiences and future plans

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, D.E.; Lego, A.J.; Clifford, A.E.

1995-12-31

Fully operational in June of 1994, the Fermilab ISDN Pilot Project was started to gain insight into the costs and benefits of providing ISDN service to the homes of Fermilab researchers. Fourteen users were chosen from throughout Fermilab, but the number of Fermilab-employed spouses pushed the total user count to 20. Each home was equipped with a basic rate ISDN (BRI) line, a BRI Ethernet half-bridge, and an NT-1. An inter-departmental team coordinated the project. Usage at each home was tracked and frequent surveys were attempted. Lessons learned include: working with Ameritech can be difficult; careful monitoring is essential; andmore » configuration of home computing equipment is very time consuming. Plans include moving entirely to primary rate ISDN hubs, support for different home ISDN equipment and better usage and performance tracking.« less

Monte Carlo simulation of the full energy peak efficiency of an HPGe detector.

PubMed

Khan, Waseem; Zhang, Qingmin; He, Chaohui; Saleh, Muhammad

2018-01-01

This paper presents a Monte Carlo method to obtain the full energy peak efficiency (FEPE) curve for a High Purity Germanium (HPGe) detector, as it is difficult and time-consuming to measure the FEPE curve experimentally. The Geant4 simulation toolkit was adopted to establish a detector model since detector specifications provided by the nominal manufacturer are usually insufficient to calculate the accurate efficiency of a detector. Several detector parameters were optimized. FEPE curves for a given HPGe detectors over the energy range of 59.50-1836keV were obtained and showed good agreements with those measured experimentally. FEPE dependences on detector parameters and source-detector distances were investigated. A best agreement with experimental result was achieved for a certain detector geometry and source-detector distance. Copyright © 2017 Elsevier Ltd. All rights reserved.

Airplane detection based on fusion framework by combining saliency model with Deep Convolutional Neural Networks

NASA Astrophysics Data System (ADS)

Dou, Hao; Sun, Xiao; Li, Bin; Deng, Qianqian; Yang, Xubo; Liu, Di; Tian, Jinwen

2018-03-01

Aircraft detection from very high resolution remote sensing images, has gained more increasing interest in recent years due to the successful civil and military applications. However, several problems still exist: 1) how to extract the high-level features of aircraft; 2) locating objects within such a large image is difficult and time consuming; 3) A common problem of multiple resolutions of satellite images still exists. In this paper, inspirited by biological visual mechanism, the fusion detection framework is proposed, which fusing the top-down visual mechanism (deep CNN model) and bottom-up visual mechanism (GBVS) to detect aircraft. Besides, we use multi-scale training method for deep CNN model to solve the problem of multiple resolutions. Experimental results demonstrate that our method can achieve a better detection result than the other methods.

Automated MAD and MIR structure solution

PubMed Central

Terwilliger, Thomas C.; Berendzen, Joel

1999-01-01

Obtaining an electron-density map from X-ray diffraction data can be difficult and time-consuming even after the data have been collected, largely because MIR and MAD structure determinations currently require many subjective evaluations of the qualities of trial heavy-atom partial structures before a correct heavy-atom solution is obtained. A set of criteria for evaluating the quality of heavy-atom partial solutions in macromolecular crystallography have been developed. These have allowed the conversion of the crystal structure-solution process into an optimization problem and have allowed its automation. The SOLVE software has been used to solve MAD data sets with as many as 52 selenium sites in the asymmetric unit. The automated structure-solution process developed is a major step towards the fully automated structure-determination, model-building and refinement procedure which is needed for genomic scale structure determinations. PMID:10089316

Data preparation and evaluation techniques for x-ray diffraction microscopy.

PubMed

Steinbrener, Jan; Nelson, Johanna; Huang, Xiaojing; Marchesini, Stefano; Shapiro, David; Turner, Joshua J; Jacobsen, Chris

2010-08-30

The post-experiment processing of X-ray Diffraction Microscopy data is often time-consuming and difficult. This is mostly due to the fact that even if a preliminary result has been reconstructed, there is no definitive answer as to whether or not a better result with more consistently retrieved phases can still be obtained. We show here that the first step in data analysis, the assembly of two-dimensional diffraction patterns from a large set of raw diffraction data, is crucial to obtaining reconstructions of highest possible consistency. We have developed software that automates this process and results in consistently accurate diffraction patterns. We have furthermore derived some criteria of validity for a tool commonly used to assess the consistency of reconstructions, the phase retrieval transfer function, and suggest a modified version that has improved utility for judging reconstruction quality.

Hybrid 3-D rocket trajectory program. Part 1: Formulation and analysis. Part 2: Computer programming and user's instruction. [computerized simulation using three dimensional motion analysis

NASA Technical Reports Server (NTRS)

Huang, L. C. P.; Cook, R. A.

1973-01-01

Models utilizing various sub-sets of the six degrees of freedom are used in trajectory simulation. A 3-D model with only linear degrees of freedom is especially attractive, since the coefficients for the angular degrees of freedom are the most difficult to determine and the angular equations are the most time consuming for the computer to evaluate. A computer program is developed that uses three separate subsections to predict trajectories. A launch rail subsection is used until the rocket has left its launcher. The program then switches to a special 3-D section which computes motions in two linear and one angular degrees of freedom. When the rocket trims out, the program switches to the standard, three linear degrees of freedom model.

Satisfiability Test with Synchronous Simulated Annealing on the Fujitsu AP1000 Massively-Parallel Multiprocessor

NASA Technical Reports Server (NTRS)

Sohn, Andrew; Biswas, Rupak

1996-01-01

Solving the hard Satisfiability Problem is time consuming even for modest-sized problem instances. Solving the Random L-SAT Problem is especially difficult due to the ratio of clauses to variables. This report presents a parallel synchronous simulated annealing method for solving the Random L-SAT Problem on a large-scale distributed-memory multiprocessor. In particular, we use a parallel synchronous simulated annealing procedure, called Generalized Speculative Computation, which guarantees the same decision sequence as sequential simulated annealing. To demonstrate the performance of the parallel method, we have selected problem instances varying in size from 100-variables/425-clauses to 5000-variables/21,250-clauses. Experimental results on the AP1000 multiprocessor indicate that our approach can satisfy 99.9 percent of the clauses while giving almost a 70-fold speedup on 500 processors.

Informational content, literacy demands, and usability of websites offering health-related genetic tests directly to consumers.

PubMed

Lachance, Christina R; Erby, Lori A H; Ford, Beth M; Allen, Vincent C; Kaphingst, Kimberly A

2010-05-01

As direct-to-consumer genetic testing becomes more available, a diverse group of consumers, including those with limited health literacy, may consider testing. In light of concerns raised about direct-to-consumer genetic testing, this study sought to critically examine whether the informational content, literacy demands, and usability of health-related direct-to-consumer websites met existing recommendations. A content analysis was performed on 29 health-related direct-to-consumer websites. Two coders independently evaluated each website for informational content (e.g., benefits, limitations), literacy demands (e.g., reading level), and usability (e.g., ease of navigation). Most sites presented health conditions and some markers for which they tested, benefits of testing, a description of the testing process, and their privacy policy. Fewer cited scientific literature, explained test limitations, or provided an opportunity to consult a health professional. Key informational content was difficult to locate on most sites. Few sites gave sample disease risk estimates or used common language and explained technical terms consistently. Average reading level was grade 15. The quality of informational content, literacy demands, and usability across health-related direct-to-consumer websites varied widely. Many users would struggle to find and understand the important information. For consumers to better understand the content on these sites and evaluate the meaning of the tests for their health, sites should lower the demands placed on users by distilling and prioritizing the key informational content while simultaneously attending to the reading level and usability elements. In the absence of regulation compelling such changes, government agencies or professional organizations may need to increase consumer and provider awareness of these issues.

A future Demand Side Management (DSM) opportunity for utility as variable renewable penetrate scale up using agriculture.

NASA Astrophysics Data System (ADS)

Ines, A.; Bhattacharjee, A.; Modi, V.; Robertson, A. W.; Lall, U.; Kocaman Ayse, S.; Chaudhary, S.; Kumar, A.; Ganapathy, A.; Kumar, A.; Mishra, V.

2015-12-01

Energy demand management, also known as demand side management (DSM), is the modification of consumer demand for energy through various methods such as smart metering, incentive based schemes, payments for turning off loads or rescheduling loads. Usually, the goal of demand side management is to encourage the consumer to use less power during periods of peak demand, or to move the time of energy use to off-peak times. Peak demand management does not necessarily decrease total energy consumption, but could be expected to reduce the need for investments in networks and/or power plants for meeting peak demands. Electricity use can vary dramatically on short and medium time frames, and the pricing system may not reflect the instantaneous cost as additional higher-cost that are brought on-line. In addition, the capacity or willingness of electricity consumers to adjust to prices by altering elasticity of demand may be low, particularly over short time frames. In the scenario of Indian grid setup, the retail customers do not follow real-time pricing and it is difficult to incentivize the utility companies for continuing the peak demand supply. A question for the future is how deeper penetration of renewable will be handled? This is a challenging problem since one has to deal with high variability, while managing loss of load probabilities. In the case of managing the peak demand using agriculture, in the future as smart metering matures with automatic turn on/off for a pump, it will become possible to provide an ensured amount of water or energy to the farmer while keeping the grid energized for 24 hours. Supply scenarios will include the possibility of much larger penetration of solar and wind into the grid. While, in absolute terms these sources are small contributors, their role will inevitably grow but DSM using agriculture could help reduce the capital cost. The other option is of advancing or delaying pump operating cycle even by several hours, will still ensure soil moisture requirements met while, balancing the overall system load with generation, reducing critical power mismatches. Through this presentation the author will describe different techniques and results from field experiments in India.

Data and Time Transfer Using SONET Radio

NASA Technical Reports Server (NTRS)

Graceffo, Gary M.

1996-01-01

The need for precise knowledge of time and frequency has become ubiquitous throughout our society. The areas of astronomy, navigation, and high speed wide-area networks are among a few of the many consumers of this type of information. The Global Positioning System (GPS) has the potential to be the most comprehensive source of precise timing information developed to date; however, the introduction of selective availability has made it difficult for many users to recover this information from the GPS system with the precision required for today's systems. The system described in this paper is a 'Synchronous Optical NetWORK (SONET) Radio Data and Time Transfer System'. The objective of this system is to provide precise time and frequency information to a variety of end-users using a two-way data and time-transfer system. Although time and frequency transfers have been done for many years, this system is unique in that time and frequency information are embedded into existing communications traffic. This eliminates the need to make the transfer of time and frequency informatio a dedicated function of the communications system. For this system SONET has been selected as the transport format from which precise time is derived. SONET has been selected because of its high data rates and its increasing acceptance throughout the industry. This paper details a proof-of-concept initiative to perform embedded time and frequency transfers using SONET Radio.

Performance specifications: the nearly impossible versus the merely difficult

NASA Astrophysics Data System (ADS)

Hopper, Darrel G.

2000-08-01

Affordability is the objective of acquisition reform. The institution of 'performance' specifications in lieu of 'design' specifications is a key strategy. Design of a cockpit display, for example, is left to the prime contractor based on a performance requirement stated by the government. The prime delegates to the integrator. The integrator develops the display and bill of materials provided by vendors. There is no feedback loop from the vendors to the ultimate customer, the government. As a result of this situation a communication gap exists: the government, primes, and integrators have concluded that they should pay commodity prices for custom displays. One step in the closing of this gap is the establishment of cross- cutting common reference performance specifications for aerospace and defense displays. The performance specification for cockpit displays is nearly impossible to achieve -- the last ounce of technology and more is required. Commodity markets, such as consumer notebook computers, are based on but a fraction of currently available technology -- companies 'bank' technology and roll it out across several 18-month product generations. Ruggedized consumer displays can be used in aerospace and defense applications other than the cockpit, such as mission crew stations. The performance specification for non-cockpit aerospace and defense applications is merely difficult. Acquisition reform has been defined by the Secretary of Defense to mean DoD should leverage the commercial market to the maximal extent possible. For the achievement of this end, an entirely different approach is wanted for cockpit displays versus large platform mission displays. That is, the nearly impossible requires a different design and business approach from the merely difficult.

An instrument to measure the charge, and energy spectrum (20-1000 GeV/a) of the cosmic ray species oxygen to iron

NASA Technical Reports Server (NTRS)

Gregory, J. C.; Smith, A. E.

1994-01-01

BUGS-4 (Bristol University Gas Scintillator-4) made its maiden engineering flight from Fort Summer (NM) on the 29th of September 1993. The instrument was consumed by fire after striking a power line during landing following 24 hours at float. The analysis of the telemetered data from this sophisticated instrument is a demanding task. Early analysis was compromised by electronic artifacts. Unravelling these problems has been difficult and time consuming, especially as the flight hardware was burned beyond salvage, but is is an essential preliminary to analysis. During this report period we have concentrated on a small sub-set of data (the first 30,000 events; 90 minutes at float), and developed software algorithms to correct systematic errors. Using these corrected events we have begun to develop the analysis algorithms. Although the analysis is preliminary, and restricted to the first 30,000 events, the results are encouraging, and suggest the design concepts are well matched to this application. Further work will refine the analysis, and allow quantitative evaluation of the concepts employed in BUGS-4 for applicability to future instruments. We believe this work will justify fabrication of a new instrument employing techniques deployed on BUGS-4.

Consumer perceptions of graded, graphic and text label presentations for qualified health claims.

PubMed

Kapsak, Wendy Reinhardt; Schmidt, David; Childs, Nancy M; Meunier, John; White, Christy

2008-03-01

On December 18, 2002, the Food and Drug Administration (FDA) announced the Consumer Health Information for Better Nutrition Initiative. The initiative's goal is to make available more and better information about conventional foods and dietary supplements to help Americans improve their health and reduce risk of disease by making sound dietary decisions. It included a rating system to assess the "weight of the publicly available evidence." It assigns one of four ranked levels to the claim thus resulting in qualified health claims. Two phases of research were conducted by the International Food Information Council (IFIC) Foundation. Qualitative research to assess consumer understanding, vocabulary, and familiarity with claims helped with the design and orientation of the second quantitative research phase. The quantitative phase employed a Web-based survey. The claim formats included: report card graphic, report card text, embedded claim text, point-counterpoint, structure/function claim, and nutrient content claim. Respondents were asked to rate the product for perceived strength of scientific evidence provided to support the claim, and questions about the product's perceived healthfulness, quality, safety, and purchase intent. Consumers found it difficult to discriminate across four levels and showed inclination to project the scientific validity grade onto other product attributes. Consumers showed preference for simpler messages.

Mathematical Approach to Identification of Load Structure at the Nodes of the Distribution Grids 6-10 kV and 0.4 kV

NASA Astrophysics Data System (ADS)

Nizamutdinova, T.; Mukhlynin, N.

2017-06-01

A significant increasing energy efficiency of the full cycle of production, transmission and distribution of electricity in grids should be based on the management of separate consumers of electricity. The existing energy supply systems based on the concept of «smart things» do not allow to identify the technical structure of the electricity consumption in the load nodes from the grid side. It makes solving the tasks of energy efficiency more difficult. To solve this problem, the use of Wavelet transform to create a mathematical tool for monitoring the load composition in the nodes of the distribution grids of 6-10 kV, 0.4 kV is proposed in this paper. The authors have created a unique wavelet based functions for some consumers, based on their current consumption graphs of these power consumers. Possibility of determination of the characteristics of individual consumers of electricity in total nodal charts of load is shown in the test case. In future, creation of a unified technical and informational model of load control will allow to solve the problem of increasing the economic efficiency of not only certain consumers, but also the entire power supply system as a whole.

Experimental studies of microwave propagation through fires for through-wall, search-and-rescue radar in firefighting

NASA Astrophysics Data System (ADS)

Temme, Andrew Kenneth Gerken

Finding people trapped inside of a burning house is extremely difficult, dangerous, and time consuming. Smoke, heat, unfamiliar floor plans, and possible structural collapse all combine to challenge a firefighter's ability to find a person. Thermal imaging cameras, the most advanced technology available to firefighters today, are able to see through smoke but are unable to see through walls and household items. Through-wall radar and vital-sign detection radar offer an imaging modality that may be able to help firefighters find victims from outside of a room or even a house. Flames can interact with electromagnetic (radar) waves because the flames create a weakly-ionized plasma. Previous work has looked at small flames fueled by pure gases or flames from wildfires. Combustable items in a house are typically petroleum-based products that have different combustion reactions compared to previously studied flames and fire-induced plasmas. Because of this, it is unknown how electromagnetic waves interact with flames found in a house fire. This dissertation investigates the question of how electromagnetic waves interact with flames in a house fire. This is an open problem, with many variables, that poses a subtle and difficult measurement task. This work focuses on creating experimental techniques to explore this problem. From an electromagnetic metrology perspective, the physical phenomena of interest are difficult to measure due to ill-defined physical boundaries, characteristics lengths of varying magnitude, inhomogeneity, and varying time scales. The experimental methods studied here primarily focus on transmission measurements through flames a few feet in height. Additionally, this work presents a proof-of-concept two-wire transmission line for bench-scale, material-characterization of solids, liquids, gases, and flames. Results from this work provide a metrological foundation for future studies in this area. An experimental setup that can withstand direct exposure to flames was developed and preliminary measurements recorded. Data taken during the development of this setup showed a time-dependance that corresponded to transmissions through the flame and the solid fuel being consumed. Calibration procedures were used to verify measurements of standard materials; the calibration procedure should be refined for larger flame measurements. Transmitters were placed inside of a burning house and signal propagation was measured, which required the design of fire-proof enclosures for the transmitters. Measured results demonstrated that transmissions may not be affected when sent from a firefighter inside of a house with fire conditions suitable for an offensive, interior attack. It is unknown if severe conditions, such as a flashover, would affect transmissions. Plasmas were observed in interferometric measurements of live-fire experiments performed in the laboratory. This work has explored an open problem in electromagnetics with live-saving applications to the fire service. Results from this work warrant additional study in this area to improve techniques, with the goal of putting search-and-rescue radars into the hands of firefighters.

A new approach for developing adjoint models

NASA Astrophysics Data System (ADS)

Farrell, P. E.; Funke, S. W.

2011-12-01

Many data assimilation algorithms rely on the availability of gradients of misfit functionals, which can be efficiently computed with adjoint models. However, the development of an adjoint model for a complex geophysical code is generally very difficult. Algorithmic differentiation (AD, also called automatic differentiation) offers one strategy for simplifying this task: it takes the abstraction that a model is a sequence of primitive instructions, each of which may be differentiated in turn. While extremely successful, this low-level abstraction runs into time-consuming difficulties when applied to the whole codebase of a model, such as differentiating through linear solves, model I/O, calls to external libraries, language features that are unsupported by the AD tool, and the use of multiple programming languages. While these difficulties can be overcome, it requires a large amount of technical expertise and an intimate familiarity with both the AD tool and the model. An alternative to applying the AD tool to the whole codebase is to assemble the discrete adjoint equations and use these to compute the necessary gradients. With this approach, the AD tool must be applied to the nonlinear assembly operators, which are typically small, self-contained units of the codebase. The disadvantage of this approach is that the assembly of the discrete adjoint equations is still very difficult to perform correctly, especially for complex multiphysics models that perform temporal integration; as it stands, this approach is as difficult and time-consuming as applying AD to the whole model. In this work, we have developed a library which greatly simplifies and automates the alternate approach of assembling the discrete adjoint equations. We propose a complementary, higher-level abstraction to that of AD: that a model is a sequence of linear solves. The developer annotates model source code with library calls that build a 'tape' of the operators involved and their dependencies, and supplies callbacks to compute the action of these operators. The library, called libadjoint, is then capable of symbolically manipulating the forward annotation to automatically assemble the adjoint equations. Libadjoint is open source, and is explicitly designed to be bolted-on to an existing discrete model. It can be applied to any discretisation, steady or time-dependent problems, and both linear and nonlinear systems. Using libadjoint has several advantages. It requires the application of an AD tool only to small pieces of code, making the use of AD far more tractable. As libadjoint derives the adjoint equations, the expertise required to develop an adjoint model is greatly diminished. One major advantage of this approach is that the model developer is freed from implementing complex checkpointing strategies for the adjoint model: libadjoint has sufficient information about the forward model to re-play the entire forward solve when necessary, and thus the checkpointing algorithm can be implemented entirely within the library itself. Examples are shown using the Fluidity/ICOM framework, a complex ocean model under development at Imperial College London.

Sensory characteristics and consumer acceptability of fermented soybean paste (Doenjang).

PubMed

Kim, H G; Hong, J H; Song, C K; Shin, H W; Kim, K O

2010-09-01

This study was conducted to examine the sensory profiles of fermented soybean paste (Doenjang), to understand consumers' acceptability of different types of Doenjang samples and to identify the sensory characteristics that drive consumer acceptability of Doenjang products. Descriptive analysis and consumer acceptability test were conducted for 7 different types of Doenjang samples. The samples included 2 types of Doenjang made by either traditional or commercially modified methods. For the descriptive analysis, 8 trained panelists developed and evaluated 31 descriptors. There were significant differences in all 31 attributes among the samples. Principal component analysis was also performed to summarize the sensory characteristics of the samples. In consumer testing, 200 consumers evaluated the acceptability of Doenjang samples. Significant differences in consumer acceptability were observed among the samples. The consumers preferred the Doenjang samples manufactured using a commercially modified method. In overall point of view, most consumers liked the Doenjang samples that had strong "sweet" and "MSG (monosodium glutamate)" tastes. It appears that "sweet" and "MSG" tastes are the drivers of liking for Doenjang. "Salty" taste, "meju,"traditional Korean soy sauce," and "fermented fish" odor/flavors seem to be the drivers of disliking for Doenjang. Cluster analysis identified 3 subconsumer segments sharing a common preference pattern for the 7 samples within a cluster. The results showed that each consumer cluster preferred different Doenjang samples. External preference mapping was performed to establish the relationships between the sensory attributes and consumer acceptability in each cluster. Consumption of the fermented soybean products is gradually expanding around the world, due to their various health benefits. Therefore, understanding sensory characteristics and consumer acceptability of Doenjang are becoming increasingly important. The intense and complex flavor characteristics of Doenjang make it difficult to obtain a comprehensive sensory profiling and drivers of liking. The finding of this study can be applied to development of a new product that has better consumer acceptability. Also this study can be a useful and effective guideline to researchers who intend to examine the sensory characteristics and consumer acceptability of fermented soybean pastes.

Infection control education: how to make an impact--tools for the job.

PubMed

Farrington, Mark

2007-06-01

Infection control education is difficult and time consuming, but there is persuasive evidence to demonstrate its effectiveness. When Infection Control practitioners are educating and influencing healthcare workers, compliance with the well-established guidance on implementation of health service research is advisable, and thus educative efforts must be repeated and administered as part of a concerted and multifaceted approach. Infection Control education must be specifically designed for and targeted at the groups of staff concerned, and medical staff pose especial problems. Recruitment of clinical champions from peer groups, and direct approaches from medical members of the Infection Control team are usually needed. Familiarity with only a limited range of published evidence is needed to answer the majority of clinicians who challenge Infection Control practices, and referral to higher medical and managerial authority is required very infrequently and as a last resort. Some recent initiatives in the NHS in England may make Infection Control education more difficult, and these are reviewed. New sanctions have been made available to hospitals and Infection control teams in the UK with the passing of the Health Act in 2006, and the effects of these allied to educative interventions on benchmarks such as hospitals' MRSA bacteraemia rates will be observed with interest.

Building America Case Study: Apartment Compartmentalization with an Aerosol-Based Sealing Process - Queens, NY; Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-07-01

Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. The innovation demonstrated under this research study was the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant, developed by the Western Cooling Efficiency Center at University of California Davis.CARB sought to demonstrate this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing ofmore » overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing. Aerosolized sealing was successful by several measures in this study. Many individual leaks that are labor-intensive to address separately were well sealed by the aerosol particles. In addition, many diffuse leaks that are difficult to identify and treat were also sealed. The aerosol-based sealing process resulted in an average reduction of 71% in air leakage across three apartments and an average apartment airtightness of 0.08 CFM50/SF of enclosure area.« less

[Endoscopic full-thickness resection].

PubMed

Meier, B; Schmidt, A; Caca, K

2016-08-01

Conventional endoscopic resection techniques such as endoscopic mucosal resection (EMR) or endoscopic submucosal dissection (ESD) are powerful tools for the treatment of gastrointestinal (GI) neoplasms. However, those techniques are limited to the superficial layers of the GI wall (mucosa and submucosa). Lesions without lifting sign (usually arising from deeper layers) or lesions in difficult anatomic positions (appendix, diverticulum) are difficult - if not impossible - to resect using conventional techniques, due to the increased risk of complications. For larger lesions (>2 cm), ESD appears to be superior to the conventional techniques because of the en bloc resection, but the procedure is technically challenging, time consuming, and associated with complications even in experienced hands. Since the development of the over-the-scope clips (OTSC), complications like bleeding or perforation can be endoscopically better managed. In recent years, different endoscopic full-thickness resection techniques came to the focus of interventional endoscopy. Since September 2014, the full-thickness resection device (FTRD) has the CE marking in Europe for full-thickness resection in the lower GI tract. Technically the device is based on the OTSC system and combines OTSC application and snare polypectomy in one step. This study shows all full-thickness resection techniques currently available, but clearly focuses on the experience with the FTRD in the lower GI tract.

10 CFR Appendix Y to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Battery Chargers

Code of Federal Regulations, 2011 CFR

2011-01-01

... power (i.e., watts) consumed as the time series integral of the power consumed over a 1-hour test period...) consumed as the time series integral of the power consumed over a 1-hour test period, divided by the period...-maintenance mode and standby mode over time periods defined in the test procedure. b. Active mode is the...

10 CFR Appendix Y to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Battery Chargers

Code of Federal Regulations, 2010 CFR

2010-01-01

... power (i.e., watts) consumed as the time series integral of the power consumed over a 1-hour test period...) consumed as the time series integral of the power consumed over a 1-hour test period, divided by the period...-maintenance mode and standby mode over time periods defined in the test procedure. b. Active mode is the...

Development of a Time-Intensity Evaluation System for Consumers: Measuring Bitterness and Retronasal Aroma of Coffee Beverages in 106 Untrained Panelists.

PubMed

Gotow, Naomi; Moritani, Ami; Hayakawa, Yoshinobu; Akutagawa, Akihito; Hashimoto, Hiroshi; Kobayakawa, Tatsu

2015-06-01

In order to develop products that are acceptable to consumers, it is necessary to incorporate consumers' intentions into products' characteristics. Therefore, investigation of consumers' perceptions of the taste or smell of common beverages provides information that should be useful in predicting market responses. In this study, we sought to develop a time-intensity evaluation system for consumer panels. Using our system, we performed time-intensity evaluation of flavor attributes (bitterness and retronasal aroma) that consumers perceived after swallowing a coffee beverage. Additionally, we developed quantitative evaluation methods for determining whether consumer panelists can properly perform time-intensity evaluation. In every trial, we fitted an exponential function to measured intensity data for bitterness and retronasal aroma. The correlation coefficients between measured time-intensity data and the fitted exponential curves were greater than 0.8 in about 90% of trials, indicating that we had successfully developed a time-intensity system for use with consumer panelists, even after just a single training trial using a nontrained consumer. We classified participants into two groups based on their consumption of canned coffee beverages. Significant difference was observed in only AUC of sensory modality (bitterness compared with retronasal aroma) among conventional TI parameters using two-way ANOVA. However, three-way ANOVA including a time course revealed significant difference between bitterness and retronasal aroma in the high-consumption group. Moreover, the high-consumption group more easily discriminated between bitterness and retronasal aroma than the low-consumption group. This finding implied that manufacturers should select consumer panelists who are suitable for their concepts of new products. © 2015 Institute of Food Technologists®

Effect of stall design on dairy calf transition to voluntary feeding on an automatic milk feeder after introduction to group housing.

PubMed

Wilson, Tanya R; LeBlanc, Stephen J; DeVries, Trevor J; Haley, Derek B

2018-06-01

Automatic milk feeders (AMF) for young dairy calves are widely used in the dairy industry. These feeders are thought to have benefits for calf health and welfare and may reduce labor required for feeding; however, little is known about how calves adapt to feeding with AMF. The objective of this study was to observe the effects of feeding stall design on calves learning to use the AMF. The hypothesis was that solid side stalls, compared with steel bar stalls, would result in a longer latency to approach and feed from the AMF without assistance. A total of 147 Holstein calves (80 male and 67 female) were enrolled at 4 d of age, introduced to a group pen, and, at the same time, trained on an AMF. For training, calves were allowed to suck on the trainer's fingers and guided to the teat. Calves were allocated to 1 of 2 stall designs at the pen level, depending on which treatment cohort they were born into, either with steel bar stall walls (n = 46 male, 34 female calves) or with solid side stall walls (n = 34 male, 33 female calves). For 72 h after introductory training on the AMF, data from the feeders were collected and calf behavior was monitored by video. Outcomes measured included latency to first voluntary visit to the feeder and to first feeding, time spent in the feeder, amount of milk consumed over 72 h, number of retraining sessions required (retrained if <2 L was consumed every 12 h), and exploratory behavior, such as sniffing and licking of the feeder. Data were analyzed using mixed effects linear regression models or a Poisson model for the outcome of retraining. For certain outcomes the effects of stall design interacted with difficulty of training (willingness to enter feeder and drink); for the 38% of calves that were scored as moderately difficult to train on a scale of easy, moderate, or difficult, treatment (stall design) differences were detected. These calves took 2× longer to lick or bite toward the nipple, 2× longer to first voluntarily feeding, and consumed less milk over 72 h following training when trained on the steel bar stall design. These results suggest simple features of a stall may influence how quickly calves learn to use an AMF, but that the influence of stall wall design was affected by how easy calves were to train on the feeder upon initial introduction, which may depend in part on certain aspects of calf temperament. For many calves, solid side stalls at an AMF resulted faster in adaption than the steel bar stalls. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

12 CFR Supplement I to Part 213 - Official Staff Commentary to Regulation M

Code of Federal Regulations, 2013 CFR

2013-01-01

... primary use. 2. Period of time. To be a consumer lease, the initial term of the lease must be more than... lease (unless terminable without penalty at any time by the consumer) under which the consumer: i... time of consummation. The threshold amount in effect during a particular time period is the amount...

12 CFR Supplement I to Part 213 - Official Staff Commentary to Regulation M

Code of Federal Regulations, 2014 CFR

2014-01-01

... primary use. 2. Period of time. To be a consumer lease, the initial term of the lease must be more than... lease (unless terminable without penalty at any time by the consumer) under which the consumer: i... time of consummation. The threshold amount in effect during a particular time period is the amount...

12 CFR Supplement I to Part 213 - Official Staff Commentary to Regulation M

Code of Federal Regulations, 2012 CFR

2012-01-01

... primary use. 2. Period of time. To be a consumer lease, the initial term of the lease must be more than... lease (unless terminable without penalty at any time by the consumer) under which the consumer: i... time of consummation. The threshold amount in effect during a particular time period is the amount...

The application of biotechnological methods in authenticity testing.

PubMed

Popping, Bert

2002-09-11

By counterfeiting brand names in the food and drink industry as well as fraudulently labelling and selling low quality products as premium products, this sector of the industry has lost significant amounts of money and the consumer has been deceived. While it was difficult to establish certain types of fraud before the advent of modern biotechnology, DNA-based methods make an important contribution to protect high-quality brand names and protect the consumer. Several years ago, DNA technologies were considered as methods used in universities, primarily for research purpose, not so much for 'real-life' applications. However, this has changed and a number of laboratories have specialised in offering such services to the industry. This article will review DNA-based techniques commonly used for authenticity testing.

Long-term care: long-term care insurance--2005. End of Year Issue Brief.

PubMed

Tanner, Rachel; Bercaw, Lawren

2005-12-31

As the "Baby Boom" generation approaches retirement, state and federal lawmakers are struggling to ensure that the nation's long-term care system will provide adequate services for the growing number of senior citizens. A 2003 Administration on Aging report predicted that the elderly population will double by 2030. Accordingly, policymakers must prepare for the impending squeeze on public health and Medicaid resources. Many consumers are exploring private long-term care insurance options as a means of preparing for the cost of eldercare. Yet, a lack of market uniformity has rendered the long-term care insurance industry somewhat difficult for consumers to decipher. In addition, senior care insurance is often costly, particularly for those over age 50.

TAS::89 0927::TAS RECOVERY - The Lean Green Energy Controller Machine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Teeter, John; Wang, Gene; Moss, David

Achieving efficiency improvements and providing demand-response programs have been identified as key elements of our national energy initiative. The residential market is the largest, yet most difficult, segment to engage in efforts to meet these objectives. This project developed Energy Management System that engages the consumer and enables Smart Grid services, applications, and business processes to address this need. Our innovative solution provides smart controller providing dynamic optimization of energy consumption for the residential energy consumer. Our solution extends the technical platform to include a cloud based Internet of Things (IoT) aggregation of data sensors and actuators the go beyondmore » energy management and extend to life style services provided through compelling mobile and console based user experiences.« less

Disease registries on the nationwide health information network.

PubMed

Russler, Daniel

2011-05-01

Donation by individuals of their protected health information (PHI) for evidence-based research potentially benefits all individuals with disease through improved understandings of disease patterns. In the future, a better understanding of how disease features combine into unique patterns of disease will generate new disease classifications, supporting greater specificity in health management techniques. However, without large numbers of people who donate their PHI to disease registries designed for research, it is difficult for researchers to discover the existence of complex patterns or to create more specific evidence-based management techniques. In order to identify new opportunities in disease registry design, an analysis of the current stage of maturity of the newly created U.S. Nationwide Health Information Network (NwHIN) related to large-scale consumer donation of PHI is presented. Utilizing a use-case analysis methodology, the consumer-centric designs of the policies and technologies created for the NwHIN were examined for the potential to support consumer donations of PHI to research. The NwHIN design has placed the enforcement point for the policy-based release of PHI over the Internet into a specialized gateway accessible to consumer authorization. However, current NwHIN policies leave the final decision regarding release of PHI for research to the health care providers rather than to the consumers themselves. Should disease registries designed for research be established on the NwHIN, consumers might then directly authorize the donation of their PHI to these disease registries. However, under current NwHIN policies, consumer authorization does not guarantee release of PHI by health providers. © 2011 Diabetes Technology Society.

First Report of Using Portable Unmanned Aircraft Systems (Drones) for Search and Rescue.

PubMed

Van Tilburg, Christopher

2017-06-01

Unmanned aircraft systems (UAS), colloquially called drones, are used commonly for military, government, and civilian purposes, including both commercial and consumer applications. During a search and rescue mission in Oregon, a UAS was used to confirm a fatality in a slot canyon; this eliminated the need for a dangerous rappel at night by rescue personnel. A second search mission in Oregon used several UAS to clear terrain. This allowed search of areas that were not accessible or were difficult to clear by ground personnel. UAS with cameras may be useful for searching, observing, and documenting missions. It is possible that UAS might be useful for delivering equipment in difficult areas and in communication. Copyright © 2017. Published by Elsevier Inc.

12 CFR Supplement I to Part 1005 - Official Interpretations

Code of Federal Regulations, 2013 CFR

2013-01-01

... used to capture the Magnetic Ink Character Recognition (MICR) encoding to initiate a one-time automated clearinghouse (ACH) debit. For example, if a consumer authorizes a one-time ACH debit from the consumer's... involved at the time of the transaction, if the consumer's asset account is subsequently debited for the...

12 CFR Supplement I to Part 1005 - Official Interpretations

Code of Federal Regulations, 2012 CFR

2012-01-01

... used to capture the Magnetic Ink Character Recognition (MICR) encoding to initiate a one-time automated clearinghouse (ACH) debit. For example, if a consumer authorizes a one-time ACH debit from the consumer's... involved at the time of the transaction, if the consumer's asset account is subsequently debited for the...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2014 CFR

2014-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

12 CFR 1005.3 - Coverage.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-time electronic fund transfer from a consumer's account. The consumer must authorize the transfer. (ii... one-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR... transfer. A consumer authorizes a one-time electronic fund transfer from his or her account to pay the fee...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

Energy Drinks: A Contemporary Issues Paper.

PubMed

Higgins, John P; Babu, Kavita; Deuster, Patricia A; Shearer, Jane

2018-02-01

Since their introduction in 1987, energy drinks have become increasingly popular and the energy drink market has grown at record pace into a multibillion-dollar global industry. Young people, students, office workers, athletes, weekend warriors, and service members frequently consume energy drinks. Both health care providers and consumers must recognize the difference between energy drinks, traditional beverages (e.g., coffee, tea, soft drinks/sodas, juices, or flavored water), and sports drinks. The research about energy drinks safety and efficacy is often contradictory, given the disparate protocols and types of products consumed: this makes it difficult to draw firm conclusions. Also, much of the available literature is industry-sponsored. After reports of adverse events associated with energy drink consumption, concerns including trouble sleeping, anxiety, cardiovascular events, seizures, and even death, have been raised about their safety. This article will focus on energy drinks, their ingredients, side effects associated with their consumption, and suggested recommendations, which call for education, regulatory actions, changes in marketing, and additional research.

Changing consumer attitudes to energy efficiency: Midterm results from an advertising campaign

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, J.S.; Seiden, K.; Baggett, S.

As utilities move away from rebates and incentives, many choose to use educational campaigns as a means to continue energy efficiency acquisition efforts. Measuring these effects is difficult and has long been considered nearly impossible by many in the evaluation community. Given the difficulty of observing behavior changes associated with education campaigns, this project sought to measure the likelihood that consumers exposed to a campaign will take the action. A model of behavior change, the theory of planned behavior developed by Icek Ajzen demonstrates that such is possible. This paper reports on the results of a longitudinal panel study ofmore » an energy efficiency mass-market educational campaign, using the Ajzen model with results from a five-wave survey of 1,200 targeted consumers and a control group of 1,200. The first wave collected pre-campaign data in Spring 1997. The authors compare these baseline data with data collected from the second and third survey waves, which were performed in Fall 1997 and Spring 1998, respectively.« less

Developing a Spanish-language consumer report for CAHPS health plan surveys.

PubMed

Derose, Kathryn Pitkin; Kanouse, David E; Weidmer, Beverly; Weech-Maldonado, Robert; García, Rosa Elena; Hays, Ron D

2007-11-01

A Spanish-language consumer report on health plan quality was developed for the Consumer Assessments of Healthcare Providers and Systems (CAHPS) project. Multiple translations, a committee review, and a readability assessment were performed to produce a draft Spanish report. The report was revised on the basis of a series of cognitive interviews with 24 Latinos. The median age of participants was 41 years, and the median number of years in the United States was 9; 67% were female, and 63% had less than a high school education. In general, participants understood the report and said they would use it to choose a health plan. Less-educated respondents had difficulty understanding the segmented bar graphs that showed the proportion of health plan members' responses. A summary chart comparing all health plans on all dimensions was easier to comprehend when differences were represented by word icons rather than by stars. Concepts and terms about health care quality translated well from English to Spanish. Simplifying graphical information involves losing some detail but makes information more usable. Summary charts facilitate comparisons across plans, but differences relative to a mean are difficult for both Spanish- and English-speaking consumers to understand.

Integrating Behavioral Health in Primary Care Using Lean Workflow Analysis: A Case Study

PubMed Central

van Eeghen, Constance; Littenberg, Benjamin; Holman, Melissa D.; Kessler, Rodger

2016-01-01

Background Primary care offices are integrating behavioral health (BH) clinicians into their practices. Implementing such a change is complex, difficult, and time consuming. Lean workflow analysis may be an efficient, effective, and acceptable method for integration. Objective Observe BH integration into primary care and measure its impact. Design Prospective, mixed methods case study in a primary care practice. Measurements Change in treatment initiation (referrals generating BH visits within the system). Secondary measures: primary care visits resulting in BH referrals, referrals resulting in scheduled appointments, time from referral to scheduled appointment, and time from referral to first visit. Providers and staff were surveyed on the Lean method. Results Referrals increased from 23 to 37/1000 visits (P<.001). Referrals resulted in more scheduled (60% to 74%, P<.001) and arrived visits (44% to 53%, P=.025). Time from referral to first scheduled visit decreased (Hazard Ratio (HR) 1.60; 95% Confidence Interval (CI) 1.37, 1.88; P<0.001) as did time to first arrived visit (HR 1.36; 95% CI 1.14, 1.62; P=0.001). Surveys and comments were positive. Conclusions This pilot integration of BH showed significant improvements in treatment initiation and other measures. Strengths of Lean included workflow improvement, system perspective, and project success. Further evaluation is indicated. PMID:27170796

Enhanced podcasts for teaching biochemistry to veterinary students.

PubMed

Gough, Kevin C

2011-01-01

The teaching of biochemistry within medical disciplines presents certain challenges; firstly to relay a large body of complex facts and abstract concepts, and secondly to motivate students that this relatively difficult topic is worth their time to study. Here, nutrient biochemistry was taught within a multidisciplinary module as part of an undergraduate veterinary curriculum. The teaching approach was initially focussed on a mixture of didactic lectures and student-centred activities such as directed group/self learning. In subsequent years the core didactic lectures were replaced with enhanced podcasts covering the same material, along with the introduction of student presentations delivered within groups with both peer and facilitator assessment. These changes were accompanied by an increase in the time dedicated to this topic to allow sufficient time for students to work through podcasts and prepare presentations. The combination of these changes resulted in significant improvements in student performance within an in-course biochemistry long essay. These changes in the teaching approach, and particularly the introduction of extensive podcasts, was well received by students who perceived the process of going through the podcasts as time consuming but allowing them flexibility in both the pace that they studied this topic as well as the location and times that they studied it. Copyright © 2011 Wiley Periodicals, Inc.

Nutritional information and health warnings on wine labels: Exploring consumer interest and preferences.

PubMed

Annunziata, A; Pomarici, E; Vecchio, R; Mariani, A

2016-11-01

This paper aims to contribute to the current debate on the inclusion of nutritional information and health warnings on wine labels, exploring consumers' interest and preferences. The results of a survey conducted on a sample of Italian wine consumers (N = 300) show the strong interest of respondents in the inclusion of such information on the label. Conjoint analysis reveals that consumers assign greater utility to health warnings, followed by nutritional information. Cluster analysis shows the existence of three different consumer segments. The first cluster, which included mainly female consumers (over 55) and those with high wine involvement, revealed greater awareness of the links between wine and health and better knowledge of wine nutritional properties, preferring a more detailed nutritional label, such as a panel with GDA%. By contrast, the other two clusters, consisting of individuals who generally find it more difficult to understand nutritional labels, preferred the less detailed label of a glass showing calories. The second and largest cluster comprising mainly younger men (under 44), showed the highest interest in health warnings while the third cluster - with a relatively low level of education - preferred the specification of the number of glasses not to exceed. Our results support the idea that the policy maker should consider introducing a mandatory nutritional label in the easier-to-implement and not-too-costly form of a glass with calories, rotating health warnings and the maximum number of glasses not to exceed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Plant phenolics and their potential role in mitigating iron overload disorder in wild animals.

PubMed

Lavin, Shana R

2012-09-01

Phenolic compounds are bioactive chemicals found in all vascular plants but are difficult to characterize and quantify, and comparative analyses on these compounds are challenging due to chemical structure complexity and inconsistent laboratory methodologies employed historically. These chemicals can elicit beneficial or toxic effects in consumers, depending on the compound, dose and the species of the consumer. In particular, plant phenolic compounds such as tannins can reduce the utilization of iron in mammalian and avian consumers. Multiple zoo-managed wild animal species are sensitive to iron overload, and these species tend to be offered diets higher in iron than most of the plant browse consumed by these animals in the wild and in captivity. Furthermore, these animals likely consume diets higher in polyphenols in the wild as compared with in managed settings. Thus, in addition to reducing dietary iron concentrations in captivity, supplementing diets with phenolic compounds capable of safely chelating iron in the intestinal lumen may reduce the incidence of iron overload in these animal species. It is recommended to investigate various sources and types of phenolic compounds for use in diets intended for iron-sensitive species. Candidate compounds should be screened both in vitro and in vivo using model species to reduce the risk of toxicity in target species. In particular, it would be important to assess potential compounds in terms of 1) biological activity including iron-binding capacity, 2) accessibility, 3) palatability, and 4) physiological effects on the consumer, including changes in nutritional and antioxidant statuses.

An approach to knowledge engineering to support knowledge-based simulation of payload ground processing at the Kennedy Space Center

NASA Technical Reports Server (NTRS)

Mcmanus, Shawn; Mcdaniel, Michael

1989-01-01

Planning for processing payloads was always difficult and time-consuming. With the advent of Space Station Freedom and its capability to support a myriad of complex payloads, the planning to support this ground processing maze involves thousands of man-hours of often tedious data manipulation. To provide the capability to analyze various processing schedules, an object oriented knowledge-based simulation environment called the Advanced Generic Accomodations Planning Environment (AGAPE) is being developed. Having nearly completed the baseline system, the emphasis in this paper is directed toward rule definition and its relation to model development and simulation. The focus is specifically on the methodologies implemented during knowledge acquisition, analysis, and representation within the AGAPE rule structure. A model is provided to illustrate the concepts presented. The approach demonstrates a framework for AGAPE rule development to assist expert system development.

Assignment of Colletotrichum coccodes isolates into vegetative compatibility groups using infrared spectroscopy: a step towards practical application.

PubMed

Salman, A; Shufan, E; Lapidot, I; Tsror, L; Moreh, R; Mordechai, S; Huleihel, M

2015-05-07

Colletotrichum coccodes (C. coccodes) is a pathogenic fungus that causes anthracnose on tomatoes and black dot disease in potatoes. It is considered as a seed tuber and soil-borne pathogen that is difficult to control. C. coccodes isolates are classified into Vegetative Compatibility Groups (VCGs). Early classification of isolates into VCGs is of great importance for a better understanding of the epidemiology of the disease and improving its control. Moreover, the differentiation among these isolates and the assignment of newly-discovered isolates enable control of the disease at its early stages. Distinguishing between isolates using microbiological or genetic methods is time-consuming and not readily available. Our results show that it is possible to assign the isolates into their VCGs and to classify them at the isolate level with a high success rate using Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA).

DecoFungi: a web application for automatic characterisation of dye decolorisation in fungal strains.

PubMed

Domínguez, César; Heras, Jónathan; Mata, Eloy; Pascual, Vico

2018-02-27

Fungi have diverse biotechnological applications in, among others, agriculture, bioenergy generation, or remediation of polluted soil and water. In this context, culture media based on color change in response to degradation of dyes are particularly relevant; but measuring dye decolorisation of fungal strains mainly relies on a visual and semiquantitative classification of color intensity changes. Such a classification is a subjective, time-consuming and difficult to reproduce process. DecoFungi is the first, at least up to the best of our knowledge, application to automatically characterise dye decolorisation level of fungal strains from images of inoculated plates. In order to deal with this task, DecoFungi employs a deep-learning model, accessible through a user-friendly web interface, with an accuracy of 96.5%. DecoFungi is an easy to use system for characterising dye decolorisation level of fungal strains from images of inoculated plates.

BIM-Sim: Interactive Simulation of Broadband Imaging Using Mie Theory

PubMed Central

Berisha, Sebastian; van Dijk, Thomas; Bhargava, Rohit; Carney, P. Scott; Mayerich, David

2017-01-01

Understanding the structure of a scattered electromagnetic (EM) field is critical to improving the imaging process. Mechanisms such as diffraction, scattering, and interference affect an image, limiting the resolution, and potentially introducing artifacts. Simulation and visualization of scattered fields thus plays an important role in imaging science. However, EM fields are high-dimensional, making them time-consuming to simulate, and difficult to visualize. In this paper, we present a framework for interactively computing and visualizing EM fields scattered by micro and nano-particles. Our software uses graphics hardware for evaluating the field both inside and outside of these particles. We then use Monte-Carlo sampling to reconstruct and visualize the three-dimensional structure of the field, spectral profiles at individual points, the structure of the field at the surface of the particle, and the resulting image produced by an optical system. PMID:29170738

Crystal plasticity modeling of β phase deformation in Ti-6Al-4V

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moore, John A.; Barton, Nathan R.; Florando, Jeff

Ti-6Al-4V is an alloy of titanium that dominates titanium usage in applications ranging from mass-produced consumer goods to high-end aerospace parts. The material's structure on a microscale is known to affect its mechanical properties but these effects are not fully understood. Specifically, this work will address the effects of low volume fraction intergranular β phase on Ti-6Al-4V's mechanical response during the transition from elastic to plastic deformation. A crystal plasticity-based finite element model is used to fully resolve the deformation of the β phase for the first time. This high fidelity model captures mechanisms difficult to access via experiments ormore » lower fidelity models. Lastly, the results are used to assess lower fidelity modeling assumptions and identify phenomena that have ramifications for failure of the material.« less

Autonomous learning based on cost assumptions: theoretical studies and experiments in robot control.

PubMed

Ribeiro, C H; Hemerly, E M

2000-02-01

Autonomous learning techniques are based on experience acquisition. In most realistic applications, experience is time-consuming: it implies sensor reading, actuator control and algorithmic update, constrained by the learning system dynamics. The information crudeness upon which classical learning algorithms operate make such problems too difficult and unrealistic. Nonetheless, additional information for facilitating the learning process ideally should be embedded in such a way that the structural, well-studied characteristics of these fundamental algorithms are maintained. We investigate in this article a more general formulation of the Q-learning method that allows for a spreading of information derived from single updates towards a neighbourhood of the instantly visited state and converges to optimality. We show how this new formulation can be used as a mechanism to safely embed prior knowledge about the structure of the state space, and demonstrate it in a modified implementation of a reinforcement learning algorithm in a real robot navigation task.

Severe unexpected adverse effects after permanent eye makeup and their management by Q-switched Nd:YAG laser

PubMed Central

Goldman, Alberto; Wollina, Uwe

2014-01-01

Permanent makeup is a cosmetic tattoo that is used to enhance one’s appearance, and which has become more popular among middle-aged and elderly women. A couple of benefits seem to be associated with permanent tattoos in the elderly: saving time (wake up with makeup); poor eyesight (difficult to apply makeup); and saving money. On the other hand, cosmetic tattoos bear the same risks as other tattoo procedures. We report on fading and unintended hyperpigmentation after tattooing on eyebrows and eyelids, and discuss the scientific and anatomical background behind the possible cause. Dermatochalasis may be a possible risk factor for excessive unwanted discolorations. Q-switched neodymium-doped yttrium aluminum garnet laser is an appropriate and safe therapeutic tool that can manage such adverse effects. Consumer protection warrants better information and education of the risks of cosmetic tattoos – in particular, for elderly women. PMID:25143716

Severe unexpected adverse effects after permanent eye makeup and their management by Q-switched Nd:YAG laser.

PubMed

Goldman, Alberto; Wollina, Uwe

2014-01-01

Permanent makeup is a cosmetic tattoo that is used to enhance one's appearance, and which has become more popular among middle-aged and elderly women. A couple of benefits seem to be associated with permanent tattoos in the elderly: saving time (wake up with makeup); poor eyesight (difficult to apply makeup); and saving money. On the other hand, cosmetic tattoos bear the same risks as other tattoo procedures. We report on fading and unintended hyperpigmentation after tattooing on eyebrows and eyelids, and discuss the scientific and anatomical background behind the possible cause. Dermatochalasis may be a possible risk factor for excessive unwanted discolorations. Q-switched neodymium-doped yttrium aluminum garnet laser is an appropriate and safe therapeutic tool that can manage such adverse effects. Consumer protection warrants better information and education of the risks of cosmetic tattoos - in particular, for elderly women.

Advances in first-principles calculations of thermodynamic properties of planetary materials (Invited)

NASA Astrophysics Data System (ADS)

Wilson, H. F.

2013-12-01

First-principles atomistic simulation is a vital tool for understanding the properties of materials at the high-pressure high-temperature conditions prevalent in giant planet interiors, but properties such as solubility and phase boundaries are dependent on entropy, a quantity not directly accessible in simulation. Determining entropic properties from atomistic simulations is a difficult problem typically requiring a time-consuming integration over molecular dynamics trajectories. Here I will describe recent advances in first-principles thermodynamic calculations which substantially increase the simplicity and efficiency of thermodynamic integration and make entropic properties more readily accessible. I will also describe the use of first-principles thermodynamic calculations for understanding problems including core solubility in gas giants and superionic phase changes in ice giants, as well as future prospects for combining first-principles thermodynamics with planetary-scale models to help us understand the origin and consequences of compositional inhomogeneity in giant planet interiors.

Crystal plasticity modeling of β phase deformation in Ti-6Al-4V

DOE PAGES

Moore, John A.; Barton, Nathan R.; Florando, Jeff; ...

2017-08-24

Ti-6Al-4V is an alloy of titanium that dominates titanium usage in applications ranging from mass-produced consumer goods to high-end aerospace parts. The material's structure on a microscale is known to affect its mechanical properties but these effects are not fully understood. Specifically, this work will address the effects of low volume fraction intergranular β phase on Ti-6Al-4V's mechanical response during the transition from elastic to plastic deformation. A crystal plasticity-based finite element model is used to fully resolve the deformation of the β phase for the first time. This high fidelity model captures mechanisms difficult to access via experiments ormore » lower fidelity models. Lastly, the results are used to assess lower fidelity modeling assumptions and identify phenomena that have ramifications for failure of the material.« less

Automatic transfer function design for medical visualization using visibility distributions and projective color mapping.

PubMed

Cai, Lile; Tay, Wei-Liang; Nguyen, Binh P; Chui, Chee-Kong; Ong, Sim-Heng

2013-01-01

Transfer functions play a key role in volume rendering of medical data, but transfer function manipulation is unintuitive and can be time-consuming; achieving an optimal visualization of patient anatomy or pathology is difficult. To overcome this problem, we present a system for automatic transfer function design based on visibility distribution and projective color mapping. Instead of assigning opacity directly based on voxel intensity and gradient magnitude, the opacity transfer function is automatically derived by matching the observed visibility distribution to a target visibility distribution. An automatic color assignment scheme based on projective mapping is proposed to assign colors that allow for the visual discrimination of different structures, while also reflecting the degree of similarity between them. When our method was tested on several medical volumetric datasets, the key structures within the volume were clearly visualized with minimal user intervention. Copyright © 2013 Elsevier Ltd. All rights reserved.

Enzyme-based electrochemical biosensors for determination of organophosphorus and carbamate pesticides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Everett, W.R.; Rechnitz, G.A.

1999-01-01

A mini review of enzyme-based electrochemical biosensors for inhibition analysis of organophosphorus and carbamate pesticides is presented. Discussion includes the most recent literature to present advances in detection limits, selectivity and real sample analysis. Recent reviews on the monitoring of pesticides and their residues suggest that the classical analytical techniques of gas and liquid chromatography are the most widely used methods of detection. These techniques, although very accurate in their determinations, can be quite time consuming and expensive and usually require extensive sample clean up and pro-concentration. For these and many other reasons, the classical techniques are very difficult tomore » adapt for field use. Numerous researchers, in the past decade, have developed and made improvements on biosensors for use in pesticide analysis. This mini review will focus on recent advances made in enzyme-based electrochemical biosensors for the determinations of organophosphorus and carbamate pesticides.« less

Automatic Analysis of Critical Incident Reports: Requirements and Use Cases.

PubMed

Denecke, Kerstin

2016-01-01

Increasingly, critical incident reports are used as a means to increase patient safety and quality of care. The entire potential of these sources of experiential knowledge remains often unconsidered since retrieval and analysis is difficult and time-consuming, and the reporting systems often do not provide support for these tasks. The objective of this paper is to identify potential use cases for automatic methods that analyse critical incident reports. In more detail, we will describe how faceted search could offer an intuitive retrieval of critical incident reports and how text mining could support in analysing relations among events. To realise an automated analysis, natural language processing needs to be applied. Therefore, we analyse the language of critical incident reports and derive requirements towards automatic processing methods. We learned that there is a huge potential for an automatic analysis of incident reports, but there are still challenges to be solved.

Rare cancer cell analyzer for whole blood applications: automated nucleic acid purification in a microfluidic disposable card.

PubMed

Kokoris, M; Nabavi, M; Lancaster, C; Clemmens, J; Maloney, P; Capadanno, J; Gerdes, J; Battrell, C F

2005-09-01

One current challenge facing point-of-care cancer detection is that existing methods make it difficult, time consuming and too costly to (1) collect relevant cell types directly from a patient sample, such as blood and (2) rapidly assay those cell types to determine the presence or absence of a particular type of cancer. We present a proof of principle method for an integrated, sample-to-result, point-of-care detection device that employs microfluidics technology, accepted assays, and a silica membrane for total RNA purification on a disposable, credit card sized laboratory-on-card ('lab card") device in which results are obtained in minutes. Both yield and quality of on-card purified total RNA, as determined by both LightCycler and standard reverse transcriptase amplification of G6PDH and BCR-ABL transcripts, were found to be better than or equal to accepted standard purification methods.

Class II composite resin restorations: faster, easier, predictable.

PubMed

Jackson, R D

2016-11-18

Composite resin continues to displace amalgam as the preferred direct restorative material in developed countries. Even though composite materials have evolved to include nanoparticles with high physical properties and low shrinkage stress, dentists have been challenged to efficiently create quality, long lasting, predictable restorations. Unlike amalgam, composite resin cannot be condensed making the establishment of a predictable, proper contact more difficult. In addition, composite requires an understanding of adhesives and an appreciation for their exacting application. These facts combined with the precise adaptation and light-curing of multiple layers makes placement of quality Class II composite restorations tedious and time-consuming. For private practicing dentists, it can also have an effect on economic productivity. Clinicians have always wanted an easier, efficient placement technique for posterior composite restorations that rivals that for amalgam. It appears that advances in instrumentation, materials and technology have finally delivered it.

Use of Web-based library resources by medical students in community and ambulatory settings.

PubMed

Tannery, Nancy Hrinya; Foust, Jill E; Gregg, Amy L; Hartman, Linda M; Kuller, Alice B; Worona, Paul; Tulsky, Asher A

2002-07-01

The purpose was to evaluate the use of Web-based library resources by third-year medical students. Third-year medical students (147) in a twelve-week multidisciplinary primary care rotation in community and ambulatory settings. Individual user surveys and log file analysis of Website were used. Twenty resource topics were compiled into a Website to provide students with access to electronic library resources from any community-based clerkship location. These resource topics, covering subjects such as hypertension and back pain, linked to curriculum training problems, full-text journal articles, MEDLINE searches, electronic book chapters, and relevant Websites. More than half of the students (69%) accessed the Website on a daily or weekly basis. Over 80% thought the Website was a valuable addition to their clerkship. Web-based information resources can provide curriculum support to students for whom access to the library is difficult and time consuming.

Development of Lateral Flow Immunoassay for Antigen Detection in Human Angiostrongylus cantonensis Infection

PubMed Central

Chen, Mu-Xin; Chen, Jia-Xu; Chen, Shao-Hong; Huang, Da-Na; Ai, Lin; Zhang, Ren-Li

2016-01-01

Angiostrongyliasis is difficult to be diagnosed for the reason that no ideal method can be used. Serologic tests require specific equipment and are not always available in poverty-stricken zone and are time-consuming. A lateral flow immunoassay (LFIA) may be useful for angiostrongyliasis control. We established a LFIA for the diagnosis of angiostrongyliasis based on 2 monoclonal antibodies (mAbs) against antigens of Angiostrongylus cantonensis adults. The sensitivity and specificity were 91.1% and 100% in LFIA, while those of commercial ELISA kit was 97.8% and 86.3%, respectively. Youden index was 0.91 in LFIA and 0.84 in commercial ELISA kit. LFIA showed detection limit of 1 ng/ml of A. cantonensis ES antigens. This LFIA was simple, rapid, highly sensitive and specific, which opened an alternative approach for the diagnosis of human angiostrongyliasis. PMID:27417097

Alpha Particle Detection Using Alpha-Induced Air Radioluminescence: A Review and Future Prospects for Preliminary Radiological Characterisation for Nuclear Facilities Decommissioning

PubMed Central

Crompton, Anita J.; Jenkins, Alex

2018-01-01

The United Kingdom (UK) has a significant legacy of nuclear installations to be decommissioned over the next 100 years and a thorough characterisation is required prior to the development of a detailed decommissioning plan. Alpha radiation detection is notoriously time consuming and difficult to carry out due to the short range of alpha particles in air. Long-range detection of alpha particles is therefore highly desirable and this has been attempted through the detection of secondary effects from alpha radiation, most notably the air-radioluminescence caused by ionisation. This paper evaluates alpha induced air radioluminescence detectors developed to date and looks at their potential to develop a stand-off, alpha radiation detector which can be used in the nuclear decommissioning field in daylight conditions to detect alpha contaminated materials. PMID:29597340

Enhanced Information Retrieval Using AJAX

NASA Astrophysics Data System (ADS)

Kachhwaha, Rajendra; Rajvanshi, Nitin

2010-11-01

Information Retrieval deals with the representation, storage, organization of, and access to information items. The representation and organization of information items should provide the user with easy access to the information with the rapid development of Internet, large amounts of digitally stored information is readily available on the World Wide Web. This information is so huge that it becomes increasingly difficult and time consuming for the users to find the information relevant to their needs. The explosive growth of information on the Internet has greatly increased the need for information retrieval systems. However, most of the search engines are using conventional information retrieval systems. An information system needs to implement sophisticated pattern matching tools to determine contents at a faster rate. AJAX has recently emerged as the new tool such the of information retrieval process of information retrieval can become fast and information reaches the use at a faster pace as compared to conventional retrieval systems.

Atmospheric solids analysis probe mass spectrometry for the rapid identification of pollens and semi-quantification of flavonoid fingerprints

DOE PAGES

Xiao, Xiaoyin; Miller, Lance L.; Parchert, Kylea J.; ...

2016-06-08

From allergies to plant reproduction, pollens have important impacts on the health of human and plant populations, yet identification of pollen grains remains difficult and time-consuming. Low-volatility flavonoids generated from pollens cannot be easily characterized and quantified with current analytical techniques. Here we demonstrate the novel use of atmospheric solids analysis probe mass spectrometry (ASAP-MS) for the characterization of flavonoids in pollens. Flavonoid patterns were generated for pollens collected from different plant types (trees and bushes) in addition to bee pollens from distinct geographic regions. Standard flavonoids (kaempferol and rhamnazin) and those produced from pollens were compared and assessed withmore » ASAP-MS using low-energy collision MS/MS. Results for a semi-quantitative method for assessing the amount of a flavonoid in pollens are also presented.« less

Atmospheric solids analysis probe mass spectrometry for the rapid identification of pollens and semi-quantification of flavonoid fingerprints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xiao, Xiaoyin; Miller, Lance L.; Parchert, Kylea J.

From allergies to plant reproduction, pollens have important impacts on the health of human and plant populations, yet identification of pollen grains remains difficult and time-consuming. Low-volatility flavonoids generated from pollens cannot be easily characterized and quantified with current analytical techniques. Here we demonstrate the novel use of atmospheric solids analysis probe mass spectrometry (ASAP-MS) for the characterization of flavonoids in pollens. Flavonoid patterns were generated for pollens collected from different plant types (trees and bushes) in addition to bee pollens from distinct geographic regions. Standard flavonoids (kaempferol and rhamnazin) and those produced from pollens were compared and assessed withmore » ASAP-MS using low-energy collision MS/MS. Results for a semi-quantitative method for assessing the amount of a flavonoid in pollens are also presented.« less

Fourier-transform infrared spectroscopy for rapid screening and live-cell monitoring: application to nanotoxicology.

PubMed

Sundaram, S K; Sacksteder, Colette A; Weber, Thomas J; Riley, Brian J; Addleman, R Shane; Harrer, Bruce J; Peterman, John W

2013-01-01

A significant challenge to realize the full potential of nanotechnology for therapeutic and diagnostic applications is to understand and evaluate how live cells interact with an external stimulus, such as a nanosized particle, and the toxicity and broad risk associated with these stimuli. It is difficult to capture the complexity and dynamics of these interactions by following omics-based approaches exclusively, which can be expensive and time-consuming. Attenuated total reflectance-Fourier transform infrared spectroscopy is well suited to provide noninvasive live-cell monitoring of cellular responses to potentially toxic nanosized particles or other stimuli. This alternative approach provides the ability to carry out rapid toxicity screenings and nondisruptive monitoring of live-cell cultures. We review the technical basis of the approach, the instrument configuration and interface with the biological media, the various effects that impact the data, subsequent data analysis and toxicity, and present some preliminary results on live-cell monitoring.

Study on automatic ECT data evaluation by using neural network

DOE Office of Scientific and Technical Information (OSTI.GOV)

Komatsu, H.; Matsumoto, Y.; Badics, Z.

1994-12-31

At the in--service inspection of the steam generator (SG) tubings in Pressurized Water Reactor (PWR) plant, eddy current testing (ECT) has been widely used at each outage. At present, ECT data evaluation is mainly performed by ECT data analyst, therefore it has the following problems. Only ECT signal configuration on the impedance trajectory is used in the evaluation. It is an enormous time consuming process. The evaluation result is influenced by the ability and experience of the analyst. Especially, it is difficult to identify the true defect signal hidden in background signals such as lift--off noise and deposit signals. Inmore » this work, the authors performed the study on the possibility of the application of neural network to ECT data evaluation. It was demonstrated that the neural network proved to be effective to identify the nature of defect, by selecting several optimum input parameters to categorize the raw ECT signals.« less

Inflation with air via a facepiece for facilitating insertion of a nasogastric tube: a prospective, randomised, double-blind study.

PubMed

Gupta, D; Agarwal, A; Nath, S S; Goswami, D; Saraswat, V; Singh, P K

2007-02-01

Insertion of a nasogastric tube is a routine procedure but during anaesthesia it is often difficult and time consuming. One hundred and sixty adults undergoing elective surgery under general anaesthesia were randomly divided into two groups. After induction of anaesthesia, neuromuscular blockade and tracheal intubation, a nasogastric tube was inserted through the nose with the head of the patient in the neutral position, either with or without prior inflation with air via a facepiece attached to a self-inflating bag applied firmly with the face. Insertion of the nasogastric tube was successful in 75/78 (96%) following inflation compared with 54/80 (68%) without inflation (p<0.001). In four patients receiving inflation, a fibreoptic endoscope was passed as far as the upper oesophageal sphincter; this revealed opening of the upper oesophageal sphincter during inflation.

Using the TIMS to estimate evapotranspiration from a forest

NASA Technical Reports Server (NTRS)

Teskey, Robert

1991-01-01

The main goals were: (1) to characterize the evapotranspiration (Et) of two forested watersheds using direct measurement techniques, and (2) to evaluate if remotely sensed surface temperatures could be used to estimate Et from the same watersheds. Two independent approaches for estimating the Et from watersheds were used. The first was derived using the Penman-Monteith Equation. This model requires the direct measurement of the microclimate of the site as well as biological measurements, i.e., stomatal conductance to water vapor and the leaf area of the stand. The primary limitation of this approach is that the measurement of stomatal conductance is time consuming, and in large trees, access to the foliage is difficult so the sample must be limited to the small number of trees. In the study, the sample was limited to the trees which could be measured from a single tower in each stand.

EoR imaging with the SKA: the challenge of foreground removal

NASA Astrophysics Data System (ADS)

Bonaldi, Anna

2018-05-01

21-cm observations of the Cosmic dawn (CD) and Epoch of Reionization (EoR) are one of the high priority science objectives for SKA Low. One of the most difficult aspects of the 21-cm measurement is the presence of foreground emission, due to our Galaxy and extragalactic sources, which is about four orders of magnitude brighter than the cosmological signal. While end-to-end simulations are being produced to investigate in details the foreground subtraction strategy, it is useful to complement this thorough but time-consuming approach with simpler, quicker ways to evaluate performance and identify possible critical steps. In this work, I present a forecast method, based on Bonaldi et al. (2015), Bonaldi & Ricciardi (2011), to understand the level of residual contamination after a component separation step, and its impact on our ability to investigate CD and EoR.

First-Principles Prediction of Liquid/Liquid Interfacial Tension.

PubMed

Andersson, M P; Bennetzen, M V; Klamt, A; Stipp, S L S

2014-08-12

The interfacial tension between two liquids is the free energy per unit surface area required to create that interface. Interfacial tension is a determining factor for two-phase liquid behavior in a wide variety of systems ranging from water flooding in oil recovery processes and remediation of groundwater aquifers contaminated by chlorinated solvents to drug delivery and a host of industrial processes. Here, we present a model for predicting interfacial tension from first principles using density functional theory calculations. Our model requires no experimental input and is applicable to liquid/liquid systems of arbitrary compositions. The consistency of the predictions with experimental data is significant for binary, ternary, and multicomponent water/organic compound systems, which offers confidence in using the model to predict behavior where no data exists. The method is fast and can be used as a screening technique as well as to extend experimental data into conditions where measurements are technically too difficult, time consuming, or impossible.

Multi-Sensor Integration to Map Odor Distribution for the Detection of Chemical Sources.

PubMed

Gao, Xiang; Acar, Levent

2016-07-04

This paper addresses the problem of mapping odor distribution derived from a chemical source using multi-sensor integration and reasoning system design. Odor localization is the problem of finding the source of an odor or other volatile chemical. Most localization methods require a mobile vehicle to follow an odor plume along its entire path, which is time consuming and may be especially difficult in a cluttered environment. To solve both of the above challenges, this paper proposes a novel algorithm that combines data from odor and anemometer sensors, and combine sensors' data at different positions. Initially, a multi-sensor integration method, together with the path of airflow was used to map the pattern of odor particle movement. Then, more sensors are introduced at specific regions to determine the probable location of the odor source. Finally, the results of odor source location simulation and a real experiment are presented.

Data preparation and evaluation techniques for x-ray diffraction microscopy

DOE PAGES

Steinbrener, Jan; Nelson, Johanna; Huang, Xiaojing; ...

2010-01-01

The post-experiment processing of X-ray Diffraction Microscopy data is often time-consuming and difficult. This is mostly due to the fact that even if a preliminary result has been reconstructed, there is no definitive answer as to whether or not a better result with more consistently retrieved phases can still be obtained. In addition, we show here that the first step in data analysis, the assembly of two-dimensional diffraction patterns from a large set of raw diffraction data, is crucial to obtaining reconstructions of highest possible consistency. We have developed software that automates this process and results in consistently accurate diffractionmore » patterns. We have furthermore derived some criteria of validity for a tool commonly used to assess the consistency of reconstructions, the phase retrieval transfer function, and suggest a modified version that has improved utility for judging reconstruction quality.« less

GammaScorpion: mobile gamma-ray tomography system for early detection of basal stem rot in oil palm plantations

NASA Astrophysics Data System (ADS)

Abdullah, Jaafar; Hassan, Hearie; Shari, Mohamad Rabaie; Mohd, Salzali; Mustapha, Mahadi; Mahmood, Airwan Affendi; Jamaludin, Shahrizan; Ngah, Mohd Rosdi; Hamid, Noor Hisham

2013-03-01

Detection of the oil palm stem rot disease Ganoderma is a major issue in estate management and production in Malaysia. Conventional diagnostic techniques are difficult and time consuming when using visual inspection, and destructive and expensive when based on the chemical analysis of root or stem tissue. As an alternative, a transportable gamma-ray computed tomography system for the early detection of basal stem rot (BSR) of oil palms due to Ganoderma was developed locally at the Malaysian Nuclear Agency, Kajang, Malaysia. This system produces high quality tomographic images that clearly differentiate between healthy and Ganoderma infected oil palm stems. It has been successfully tested and used to detect the extent of BSR damage in oil palm plantations in Malaysia without the need to cut down the trees. This method offers promise for in situ inspection of oil palm stem diseases compared to the more conventional methods.

Identifying the critical financial ratios for stocks evaluation: A fuzzy delphi approach

NASA Astrophysics Data System (ADS)

Mokhtar, Mazura; Shuib, Adibah; Mohamad, Daud

2014-12-01

Stocks evaluation has always been an interesting and challenging problem for both researchers and practitioners. Generally, the evaluation can be made based on a set of financial ratios. Nevertheless, there are a variety of financial ratios that can be considered and if all ratios in the set are placed into the evaluation process, data collection would be more difficult and time consuming. Thus, the objective of this paper is to identify the most important financial ratios upon which to focus in order to evaluate the stock's performance. For this purpose, a survey was carried out using an approach which is based on an expert judgement, namely the Fuzzy Delphi Method (FDM). The results of this study indicated that return on equity, return on assets, net profit margin, operating profit margin, earnings per share and debt to equity are the most important ratios.

Viability of using different types of main oil pipelines pump drives

NASA Astrophysics Data System (ADS)

Zakirzakov, A. G.; Zemenkov, Yu D.; Akulov, K. A.

2018-05-01

The choice of the pumping units' drive of main oil pipelines is of great importance both for design of pipelines and for modernization of existing ones. At the beginning of oil pipeline transport development, due to the limited number and types of energy sources, the choice was not difficult. The combustion energy of the pumped product was often the only available energy resource for its transportation. In this regard, the pipelines that had autonomous energy sources favorably differed from other energy consumers in the sector. With the passage of time, with the development of the country's electricity supply system, the electric drive for power-line equipment of oil pipelines becomes the dominant type of a pumping station drive. Nowadays, the traditional component is an essential factor when choosing some type of the drive. For many years, oil companies have been using electric drives for pumps, while gas transport enterprises prefer self-contained gas turbines.

The Open Perimetry Interface: an enabling tool for clinical visual psychophysics.

PubMed

Turpin, Andrew; Artes, Paul H; McKendrick, Allison M

2012-01-01

Perimeters are commercially available instruments for measuring various attributes of the visual field in a clinical setting. They have several advantages over traditional lab-based systems for conducting vision experiments, including built-in gaze tracking and calibration, polished appearance, and attributes to increase participant comfort. Prior to this work, there was no standard to control such instruments, making it difficult and time consuming to use them for novel psychophysical experiments. This paper introduces the Open Perimetry Interface (OPI), a standard set of functions that can be used to control perimeters. Currently the standard is partially implemented in the open-source programming language R on two commercially available instruments: the Octopus 900 (a projection-based bowl perimeter produced by Haag-Streit, Switzerland) and the Heidelberg Edge Perimeter (a CRT-based system produced by Heidelberg Engineering, Germany), allowing these instruments to be used as a platform for psychophysical experimentation.

Label-free optical imaging of membrane patches for atomic force microscopy

PubMed Central

Churnside, Allison B.; King, Gavin M.; Perkins, Thomas T.

2010-01-01

In atomic force microscopy (AFM), finding sparsely distributed regions of interest can be difficult and time-consuming. Typically, the tip is scanned until the desired object is located. This process can mechanically or chemically degrade the tip, as well as damage fragile biological samples. Protein assemblies can be detected using the back-scattered light from a focused laser beam. We previously used back-scattered light from a pair of laser foci to stabilize an AFM. In the present work, we integrate these techniques to optically image patches of purple membranes prior to AFM investigation. These rapidly acquired optical images were aligned to the subsequent AFM images to ~40 nm, since the tip position was aligned to the optical axis of the imaging laser. Thus, this label-free imaging efficiently locates sparsely distributed protein assemblies for subsequent AFM study while simultaneously minimizing degradation of the tip and the sample. PMID:21164738

Postreinforcement Pause in Grocery Shopping: Comparing Interpurchase Times across Products and Consumers

ERIC Educational Resources Information Center

Oliveira-Castro, Jorge M.; James, Victoria K.; Foxall, Gordon R.

2007-01-01

Purchase probability as a function of interpurchase time was examined through comparison of findings from laboratory experiments on reinforcement schedules and from marketing investigations of consumers' interpurchase time. Panel data, based on a sample of 80 consumers who purchased nine supermarket food products during 16 weeks, were used. For…

The Dangers of Cassava (Tapioca) Consumption

PubMed Central

Hall, Michael J

1987-01-01

Cassava (Tapioca) is a worldwide staple food consumed by over 800 million people. It contains cyanide which may lead to acute toxicity or chronically may be an aetiological factor in tropical nutritional amblyopia, tropical neuropathy, endemic goitre, cretinism and tropical diabetes. It may also have carcinogenic potential. However, despite nutritional limitations it has many advantages as a crop to the subsistence farmer and would be difficult to replace. PMID:28906749

Substance abuse and quality of life among severely mentally ill consumers: a longitudinal modelling analysis.

PubMed

Urbanoski, Karen A; Cairney, John; Adlaf, Edward; Rush, Brian

2007-10-01

Evidence suggests that substance abuse negatively affects both psychiatric symptom severity and quality of life (QOL) in people with severe mental illness (SMI). However, these relationships have not been examined simultaneously, nor have they been characterized over time. Thus, it is difficult to appreciate the extent to which substance abuse exerts an enduring effect on psychiatric symptoms and distress and/or QOL in this population. The purpose of this study is to test a conceptual model linking these factors together. Subjects were participants in a longitudinal evaluation of community mental healthcare in Ontario (n = 133). Comprehensive consumer assessments were conducted at treatment entry, and at 9 and 18 months. Subjects were receiving intensive case management or assertive community treatment throughout the 18-month study period. Structural equation modelling was used to examine the concurrent and longitudinal relationships between substance abuse, symptoms and distress, and QOL. The prevalence of substance abuse was 55.0%. The SEM analysis suggested that substance abuse at baseline was associated with elevated symptomatology and distress and lower QOL, and that these effects endured after 18 months of treatment. Psychiatric symptoms and distress mediated the negative relationship between substance abuse and QOL. The mediating role played by symptom and distress levels in the relationship between substance abuse and QOL suggests the importance of closely monitoring changes in these factors among SMI patients with substance problems. Tracking symptom severity and distress levels over time will allow service providers to intervene and potentially improve the QOL of individuals with SMI.

The Structural Features of Sports and Race Betting Inducements: Issues for Harm Minimisation and Consumer Protection.

PubMed

Hing, Nerilee; Sproston, Kerry; Brook, Kate; Brading, Richard

2017-06-01

Minimal research has been published about inducements for sports and race betting, despite their ready availability and aggressive advertising. This paper aimed to document the range and structural features of these inducements, and analyse their alignment with the harm minimisation and consumer protection goals of responsible gambling. A scan of all inducements offered on the websites of 30 major race and sports betting brands located 223 separate inducements which we categorised into 15 generic types, all offering financial incentives to purchase. These comprised sign-up offers, refer-a-friend offers, happy hours, mobile betting bonuses, multi-bet offers, refund/stake-back offers, matching stakes/deposits, winnings paid for 'close calls', bonus or better odds, bonus or better winnings, competitions, reduced commission, free bets to selected punters, cash rebates and other free bets. All inducements were subject to numerous terms and conditions which were complex, difficult to find, and obscured by legalistic language. Play-through conditions of bonus bets were particularly difficult to interpret and failed basic requirements for informed choice. Website advertisements for inducements were prominently promoted but few contained a responsible gambling message. The results were analysed to generate 12 research propositions considered worthy of empirical research to inform much needed regulatory reform in this area.

INDUCTIVE SYSTEM HEALTH MONITORING WITH STATISTICAL METRICS

NASA Technical Reports Server (NTRS)

Iverson, David L.

2005-01-01

Model-based reasoning is a powerful method for performing system monitoring and diagnosis. Building models for model-based reasoning is often a difficult and time consuming process. The Inductive Monitoring System (IMS) software was developed to provide a technique to automatically produce health monitoring knowledge bases for systems that are either difficult to model (simulate) with a computer or which require computer models that are too complex to use for real time monitoring. IMS processes nominal data sets collected either directly from the system or from simulations to build a knowledge base that can be used to detect anomalous behavior in the system. Machine learning and data mining techniques are used to characterize typical system behavior by extracting general classes of nominal data from archived data sets. In particular, a clustering algorithm forms groups of nominal values for sets of related parameters. This establishes constraints on those parameter values that should hold during nominal operation. During monitoring, IMS provides a statistically weighted measure of the deviation of current system behavior from the established normal baseline. If the deviation increases beyond the expected level, an anomaly is suspected, prompting further investigation by an operator or automated system. IMS has shown potential to be an effective, low cost technique to produce system monitoring capability for a variety of applications. We describe the training and system health monitoring techniques of IMS. We also present the application of IMS to a data set from the Space Shuttle Columbia STS-107 flight. IMS was able to detect an anomaly in the launch telemetry shortly after a foam impact damaged Columbia's thermal protection system.

Time Sharing Between Robotics and Process Control: Validating a Model of Attention Switching.

PubMed

Wickens, Christopher Dow; Gutzwiller, Robert S; Vieane, Alex; Clegg, Benjamin A; Sebok, Angelia; Janes, Jess

2016-03-01

The aim of this study was to validate the strategic task overload management (STOM) model that predicts task switching when concurrence is impossible. The STOM model predicts that in overload, tasks will be switched to, to the extent that they are attractive on task attributes of high priority, interest, and salience and low difficulty. But more-difficult tasks are less likely to be switched away from once they are being performed. In Experiment 1, participants performed four tasks of the Multi-Attribute Task Battery and provided task-switching data to inform the role of difficulty and priority. In Experiment 2, participants concurrently performed an environmental control task and a robotic arm simulation. Workload was varied by automation of arm movement and both the phases of environmental control and existence of decision support for fault management. Attention to the two tasks was measured using a head tracker. Experiment 1 revealed the lack of influence of task priority and confirmed the differing roles of task difficulty. In Experiment 2, the percentage attention allocation across the eight conditions was predicted by the STOM model when participants rated the four attributes. Model predictions were compared against empirical data and accounted for over 95% of variance in task allocation. More-difficult tasks were performed longer than easier tasks. Task priority does not influence allocation. The multiattribute decision model provided a good fit to the data. The STOM model is useful for predicting cognitive tunneling given that human-in-the-loop simulation is time-consuming and expensive. © 2016, Human Factors and Ergonomics Society.

Development and Implementation of a Generic Analysis Template for Structural-Thermal-Optical-Performance Modeling

NASA Technical Reports Server (NTRS)

Scola, Salvatore; Stavely, Rebecca; Jackson, Trevor; Boyer, Charlie; Osmundsen, Jim; Turczynski, Craig; Stimson, Chad

2016-01-01

Performance-related effects of system level temperature changes can be a key consideration in the design of many types of optical instruments. This is especially true for space-based imagers, which may require complex thermal control systems to maintain alignment of the optical components. Structural-Thermal-Optical-Performance (STOP) analysis is a multi-disciplinary process that can be used to assess the performance of these optical systems when subjected to the expected design environment. This type of analysis can be very time consuming, which makes it difficult to use as a trade study tool early in the project life cycle. In many cases, only one or two iterations can be performed over the course of a project. This limits the design space to best practices since it may be too difficult, or take too long, to test new concepts analytically. In order to overcome this challenge, automation, and a standard procedure for performing these studies is essential. A methodology was developed within the framework of the Comet software tool that captures the basic inputs, outputs, and processes used in most STOP analyses. This resulted in a generic, reusable analysis template that can be used for design trades for a variety of optical systems. The template captures much of the upfront setup such as meshing, boundary conditions, data transfer, naming conventions, and post-processing, and therefore saves time for each subsequent project. A description of the methodology and the analysis template is presented, and results are described for a simple telescope optical system.

Determination of methicillin-resistant and methicillin-susceptible Staphylococcus aureus bacteria in blood by capillary zone electrophoresis.

PubMed

Horká, Marie; Tesařová, Marie; Karásek, Pavel; Růžička, Filip; Holá, Veronika; Sittová, Martina; Roth, Michal

2015-04-08

Serious bloodstream infections are a significant complication in critically ill patients. The treatment of these infections has become more difficult because of the increasing prevalence of multiresistant strains, especially methicillin-resistant Staphylococcus aureus (MRSA). Rapid differentiation of low number of MRSA from methicillin-susceptible S. aureus (MSSA) cells (10(1)-10(2) cells mL(-1)) in blood is necessary for fast effective antibiotic therapy. Currently, three groups of techniques, phenotyping, genotyping, and mass spectrometry, are used for MRSA and MSSA strains differentiation. Most of these techniques are time-consuming. PCR and other molecular techniques allow the detection and differentiation between MSSA and MRSA directly from blood cultures. These methods alone are rapid and they have good reproducibility and repeatability. Potential disadvantages of the genotyping methods include their discrimination ability, technical complexity, financial costs, and difficult interpretation of the results. Recently, capillary electrophoresis (CZE) was successfully used to differentiate between the agar-cultivated MRSA and MSSA strains in fused silica capillaries etched with supercritical water and modified with (3-glycidyloxypropyl)trimethoxysilane. The possible use of CZE as a fast and low-cost method for distinguishing between the blood-incubated MRSA or MSSA cells has been tested in this manuscript. Our goal was to test low amounts of bacteria (∼10(2) cell mL(-1)) similar to those in clinical samples. The migration times of the purified blood-incubated cells and the agar-cultivated cells were different from each other. However, their isoelectric point was the same for all strains. Copyright © 2015 Elsevier B.V. All rights reserved.

Development and implementation of a generic analysis template for structural-thermal-optical-performance modeling

NASA Astrophysics Data System (ADS)

Scola, Salvatore; Stavely, Rebecca; Jackson, Trevor; Boyer, Charlie; Osmundsen, Jim; Turczynski, Craig; Stimson, Chad

2016-09-01

Performance-related effects of system level temperature changes can be a key consideration in the design of many types of optical instruments. This is especially true for space-based imagers, which may require complex thermal control systems to maintain alignment of the optical components. Structural-Thermal-Optical-Performance (STOP) analysis is a multi-disciplinary process that can be used to assess the performance of these optical systems when subjected to the expected design environment. This type of analysis can be very time consuming, which makes it difficult to use as a trade study tool early in the project life cycle. In many cases, only one or two iterations can be performed over the course of a project. This limits the design space to best practices since it may be too difficult, or take too long, to test new concepts analytically. In order to overcome this challenge, automation, and a standard procedure for performing these studies is essential. A methodology was developed within the framework of the Comet software tool that captures the basic inputs, outputs, and processes used in most STOP analyses. This resulted in a generic, reusable analysis template that can be used for design trades for a variety of optical systems. The template captures much of the upfront setup such as meshing, boundary conditions, data transfer, naming conventions, and post-processing, and therefore saves time for each subsequent project. A description of the methodology and the analysis template is presented, and results are described for a simple telescope optical system.

Direct-to-consumer advertising in oncology: a content analysis of print media.

PubMed

Abel, Gregory A; Lee, Stephanie J; Weeks, Jane C

2007-04-01

Content analysis of cancer-related direct-to-consumer advertising (DTCA), with a focus on how benefit and risk/adverse effect information is presented, is essential to understanding its potential impact on oncology outcomes. We reviewed all oncology DTCA appearing in three patient-focused cancer magazines and a sample of selected popular magazines from January 2003 to June 2006. We determined the Flesch reading ease score (FRES) for the text in each advertisement (a score > or = 65 is readable for the average person). We also assessed the proportion, type size, and placement of benefits and risks/adverse effects, as well as the nature and content of advertising appeals. Of 284 advertisements identified, 49 were unique. Oncology-related DTCA was rare in the popular magazines, and appeared mostly in those aimed at female readership. About equal amounts of text were devoted to benefits and risks/adverse effects, and all text was difficult to read. The mean FRES for benefit text was 39.71; for risk/adverse effect text, it was 38.22, a difference of 1.49 (95% CI, -4.02 to 7.00). The largest font size for benefits was 4.60 mm on average; for risks/adverse effects, it was 2.38 mm, a difference of 2.22 mm (95% CI, 1.35 to 3.09). Appeals to medication effectiveness were frequent (95%) and often made with clinical trial data (61%). Oncology print DTCA is prevalent in cancer-related, patient-directed magazines, and infrequent in the popular press. The information presented is considerably difficult to read, raising important questions about the appropriateness of direct-to-consumer marketing for oncologic medications.

Efficient parallel implementation of active appearance model fitting algorithm on GPU.

PubMed

Wang, Jinwei; Ma, Xirong; Zhu, Yuanping; Sun, Jizhou

2014-01-01

The active appearance model (AAM) is one of the most powerful model-based object detecting and tracking methods which has been widely used in various situations. However, the high-dimensional texture representation causes very time-consuming computations, which makes the AAM difficult to apply to real-time systems. The emergence of modern graphics processing units (GPUs) that feature a many-core, fine-grained parallel architecture provides new and promising solutions to overcome the computational challenge. In this paper, we propose an efficient parallel implementation of the AAM fitting algorithm on GPUs. Our design idea is fine grain parallelism in which we distribute the texture data of the AAM, in pixels, to thousands of parallel GPU threads for processing, which makes the algorithm fit better into the GPU architecture. We implement our algorithm using the compute unified device architecture (CUDA) on the Nvidia's GTX 650 GPU, which has the latest Kepler architecture. To compare the performance of our algorithm with different data sizes, we built sixteen face AAM models of different dimensional textures. The experiment results show that our parallel AAM fitting algorithm can achieve real-time performance for videos even on very high-dimensional textures.

Efficient Parallel Implementation of Active Appearance Model Fitting Algorithm on GPU

PubMed Central

Wang, Jinwei; Ma, Xirong; Zhu, Yuanping; Sun, Jizhou

2014-01-01

The active appearance model (AAM) is one of the most powerful model-based object detecting and tracking methods which has been widely used in various situations. However, the high-dimensional texture representation causes very time-consuming computations, which makes the AAM difficult to apply to real-time systems. The emergence of modern graphics processing units (GPUs) that feature a many-core, fine-grained parallel architecture provides new and promising solutions to overcome the computational challenge. In this paper, we propose an efficient parallel implementation of the AAM fitting algorithm on GPUs. Our design idea is fine grain parallelism in which we distribute the texture data of the AAM, in pixels, to thousands of parallel GPU threads for processing, which makes the algorithm fit better into the GPU architecture. We implement our algorithm using the compute unified device architecture (CUDA) on the Nvidia's GTX 650 GPU, which has the latest Kepler architecture. To compare the performance of our algorithm with different data sizes, we built sixteen face AAM models of different dimensional textures. The experiment results show that our parallel AAM fitting algorithm can achieve real-time performance for videos even on very high-dimensional textures. PMID:24723812

webpic: A flexible web application for collecting distance and count measurements from images

PubMed Central

2018-01-01

Despite increasing ability to store and analyze large amounts of data for organismal and ecological studies, the process of collecting distance and count measurements from images has largely remained time consuming and error-prone, particularly for tasks for which automation is difficult or impossible. Improving the efficiency of these tasks, which allows for more high quality data to be collected in a shorter amount of time, is therefore a high priority. The open-source web application, webpic, implements common web languages and widely available libraries and productivity apps to streamline the process of collecting distance and count measurements from images. In this paper, I introduce the framework of webpic and demonstrate one readily available feature of this application, linear measurements, using fossil leaf specimens. This application fills the gap between workflows accomplishable by individuals through existing software and those accomplishable by large, unmoderated crowds. It demonstrates that flexible web languages can be used to streamline time-intensive research tasks without the use of specialized equipment or proprietary software and highlights the potential for web resources to facilitate data collection in research tasks and outreach activities with improved efficiency. PMID:29608592

Short communication: Identification of subclinical cow mastitis pathogens in milk by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

PubMed

Barreiro, J R; Ferreira, C R; Sanvido, G B; Kostrzewa, M; Maier, T; Wegemann, B; Böttcher, V; Eberlin, M N; dos Santos, M V

2010-12-01

Subclinical mastitis is a common and easily disseminated disease in dairy herds. Its routine diagnosis via bacterial culture and biochemical identification is a difficult and time-consuming process. In this work, we show that matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) allows bacterial identification with high confidence and speed (1 d for bacterial growth and analysis). With the use of MALDI-TOF MS, 33 bacterial culture isolates from milk of different dairy cows from several farms were analyzed, and the results were compared with those obtained by classical biochemical methods. This proof-of-concept case demonstrates the reliability of MALDI-TOF MS bacterial identification, and its increased selectivity as illustrated by the additional identification of coagulase-negative Staphylococcus species and mixed bacterial cultures. Matrix-assisted laser desorption-ionization mass spectrometry considerably accelerates the diagnosis of mastitis pathogens, especially in cases of subclinical mastitis. More immediate and efficient animal management strategies for mastitis and milk quality control in the dairy industry can therefore be applied. Copyright © 2010 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Wake up and smell the coffee. Caffeine, coffee, and the medical consequences.

PubMed Central

Chou, T

1992-01-01

Caffeine is a methylxanthine whose primary biologic effect is antagonism of the adenosine receptor. Its presence in coffee, tea, soda beverages, chocolate, and many prescription and over-the-counter drugs makes it the most commonly consumed stimulant drug. Initially caffeine increases blood pressure, plasma catecholamine levels, plasma renin activity, serum free fatty acid levels, urine production, and gastric acid secretion. Its long-term effects have been more difficult to substantiate. Most of the caffeine consumed in the United States is in coffee, which contains many other chemicals that may have other biologic actions. The consumption of coffee is a self-reinforcing behavior, and caffeine dependence and addiction are common. Coffee and caffeine intake have been linked to many illnesses, but definitive correlations have been difficult to substantiate. Initial trials showing coffee's association with coronary disease and myocardial infarction have been difficult to reproduce and have many confounding variables. Recent studies showing a larger effect over long follow-up periods and with heavy coffee consumption have again brought the question of the role of coffee in disease states to the fore. Caffeine in average dosages does not seem to increase the risk of arrhythmia. At present there is no convincing evidence that caffeine or coffee consumption increases the risk for any solid tumor. The intake of coffee and caffeine has clearly been decreasing in this country over the past two decades, largely brought about by the increasing health consciousness of Americans. Although there have been many studies that hint that the fears of increased disease with coffee drinking may be warranted, many questions have yet to be answered about the health effects of coffee and caffeine use. Images PMID:1441496

Wake up and smell the coffee. Caffeine, coffee, and the medical consequences.

PubMed

Chou, T

1992-11-01

Caffeine is a methylxanthine whose primary biologic effect is antagonism of the adenosine receptor. Its presence in coffee, tea, soda beverages, chocolate, and many prescription and over-the-counter drugs makes it the most commonly consumed stimulant drug. Initially caffeine increases blood pressure, plasma catecholamine levels, plasma renin activity, serum free fatty acid levels, urine production, and gastric acid secretion. Its long-term effects have been more difficult to substantiate. Most of the caffeine consumed in the United States is in coffee, which contains many other chemicals that may have other biologic actions. The consumption of coffee is a self-reinforcing behavior, and caffeine dependence and addiction are common. Coffee and caffeine intake have been linked to many illnesses, but definitive correlations have been difficult to substantiate. Initial trials showing coffee's association with coronary disease and myocardial infarction have been difficult to reproduce and have many confounding variables. Recent studies showing a larger effect over long follow-up periods and with heavy coffee consumption have again brought the question of the role of coffee in disease states to the fore. Caffeine in average dosages does not seem to increase the risk of arrhythmia. At present there is no convincing evidence that caffeine or coffee consumption increases the risk for any solid tumor. The intake of coffee and caffeine has clearly been decreasing in this country over the past two decades, largely brought about by the increasing health consciousness of Americans. Although there have been many studies that hint that the fears of increased disease with coffee drinking may be warranted, many questions have yet to be answered about the health effects of coffee and caffeine use.

12 CFR Supplement I to Part 213 - Official Staff Commentary to Regulation M

Code of Federal Regulations, 2010 CFR

2010-01-01

... primary use. 2. Period of time. To be a consumer lease, the initial term of the lease must be more than... lease (unless terminable without penalty at any time by the consumer) under which the consumer: i... the lease contract, so long as all disclosures are given at the same time. Alternatively, all...

12 CFR Supplement I to Part 213 - Official Staff Commentary to Regulation M

Code of Federal Regulations, 2011 CFR

2011-01-01

... primary use. 2. Period of time. To be a consumer lease, the initial term of the lease must be more than... lease (unless terminable without penalty at any time by the consumer) under which the consumer: i... the lease contract, so long as all disclosures are given at the same time. Alternatively, all...

Time trends and patterns of reported egg consumption in the U.S. by sociodemographic characteristics

USDA-ARS?s Scientific Manuscript database

Objectives: To 1) describe time trends of the percentage of individuals in the U.S that consume eggs, 2) describe time trends of the daily amount of eggs consumed per day, and 3) examine differences in the amount of eggs consumed per day; overall and by gender, age, income, education, race-ethnicit...

Analytic Guided-Search Model of Human Performance Accuracy in Target- Localization Search Tasks

NASA Technical Reports Server (NTRS)

Eckstein, Miguel P.; Beutter, Brent R.; Stone, Leland S.

2000-01-01

Current models of human visual search have extended the traditional serial/parallel search dichotomy. Two successful models for predicting human visual search are the Guided Search model and the Signal Detection Theory model. Although these models are inherently different, it has been difficult to compare them because the Guided Search model is designed to predict response time, while Signal Detection Theory models are designed to predict performance accuracy. Moreover, current implementations of the Guided Search model require the use of Monte-Carlo simulations, a method that makes fitting the model's performance quantitatively to human data more computationally time consuming. We have extended the Guided Search model to predict human accuracy in target-localization search tasks. We have also developed analytic expressions that simplify simulation of the model to the evaluation of a small set of equations using only three free parameters. This new implementation and extension of the Guided Search model will enable direct quantitative comparisons with human performance in target-localization search experiments and with the predictions of Signal Detection Theory and other search accuracy models.

Springback compensation for a vehicle's steel body panel

NASA Astrophysics Data System (ADS)

Bałon, Paweł; Świątoniowski, Andrzej; Szostak, Janusz; Kiełbasa, Bartłomiej

2017-10-01

This paper presents a structural element of a vehicle, that is made from High Strength Steels. Application of this kind of materials considerably reduces construction mass due to high durability. Nevertheless, it results in appearance of springback that depends mainly on used material as well as part. Springback reduction helps to reach the reference geometry of the element by using the Finite Element Method software. Authors compared two methods of optimization of die shape. The first method defines the compensation of the die shape only for OP-20 and the second multi-operation method defines the compensation of the die shape for the OP-20 and OP-50 operations. Prediction of springback by the trial-and-error method is difficult and labor-intensive. Designing of dies requires using of appropriate FEM software to make them more economic and less time-consuming. Virtual compensation methods make it possible to receive precise result in a short time. Die compensation with software application was experimentally verified by the prototype die. Therefore, springback deformation becomes a critical problem especially for the HSS steel when the geometry is complex.

Ultrasonic sensor based defect detection and characterisation of ceramics.

PubMed

Kesharaju, Manasa; Nagarajah, Romesh; Zhang, Tonzhua; Crouch, Ian

2014-01-01

Ceramic tiles, used in body armour systems, are currently inspected visually offline using an X-ray technique that is both time consuming and very expensive. The aim of this research is to develop a methodology to detect, locate and classify various manufacturing defects in Reaction Sintered Silicon Carbide (RSSC) ceramic tiles, using an ultrasonic sensing technique. Defects such as free silicon, un-sintered silicon carbide material and conventional porosity are often difficult to detect using conventional X-radiography. An alternative inspection system was developed to detect defects in ceramic components using an Artificial Neural Network (ANN) based signal processing technique. The inspection methodology proposed focuses on pre-processing of signals, de-noising, wavelet decomposition, feature extraction and post-processing of the signals for classification purposes. This research contributes to developing an on-line inspection system that would be far more cost effective than present methods and, moreover, assist manufacturers in checking the location of high density areas, defects and enable real time quality control, including the implementation of accept/reject criteria. Copyright © 2013 Elsevier B.V. All rights reserved.

Current HDTV overview in the United States, Japan, and Europe

NASA Astrophysics Data System (ADS)

Cripps, Dale E.

1991-08-01

Vast resources are being spent on three continents, preparing for the commercialization of HDTV. The forces that together will launch this new industry are moving at dizzying speeds. This paper covers the highlights of events past and present and offers some predictions for the future. Difficult standards problems that keep brakes on the industry, and that will continue for some time to come. Standards committees have been set up around the world and are hard at work. It is a job with considerable technical and political challenges. By the time major plans and resources come together for commercialization of HDTV, one can trust that there will be adequately stable standards. But to observe the current status is to see a mess. High definition is not only consumer television. Because of its versatility, it is much more likely to find its way first into areas offering high returns such as medicine, education, printing, corporate communications, military and space, and even criminal control. HDTV is very likely to deliver movies and cultural events to theaters, and may also become the platform for a new generation of computers.

A network-analysis-based comparative study of the throughput behavior of polymer melts in barrier screw geometries

NASA Astrophysics Data System (ADS)

Aigner, M.; Köpplmayr, T.; Kneidinger, C.; Miethlinger, J.

2014-05-01

Barrier screws are widely used in the plastics industry. Due to the extreme diversity of their geometries, describing the flow behavior is difficult and rarely done in practice. We present a systematic approach based on networks that uses tensor algebra and numerical methods to model and calculate selected barrier screw geometries in terms of pressure, mass flow, and residence time. In addition, we report the results of three-dimensional simulations using the commercially available ANSYS Polyflow software. The major drawbacks of three-dimensional finite-element-method (FEM) simulations are that they require vast computational power and, large quantities of memory, and consume considerable time to create a geometric model created by computer-aided design (CAD) and complete a flow calculation. Consequently, a modified 2.5-dimensional finite volume method, termed network analysis is preferable. The results obtained by network analysis and FEM simulations correlated well. Network analysis provides an efficient alternative to complex FEM software in terms of computing power and memory consumption. Furthermore, typical barrier screw geometries can be parameterized and used for flow calculations without timeconsuming CAD-constructions.

Optimizing DNA assembly based on statistical language modelling.

PubMed

Fang, Gang; Zhang, Shemin; Dong, Yafei

2017-12-15

By successively assembling genetic parts such as BioBrick according to grammatical models, complex genetic constructs composed of dozens of functional blocks can be built. However, usually every category of genetic parts includes a few or many parts. With increasing quantity of genetic parts, the process of assembling more than a few sets of these parts can be expensive, time consuming and error prone. At the last step of assembling it is somewhat difficult to decide which part should be selected. Based on statistical language model, which is a probability distribution P(s) over strings S that attempts to reflect how frequently a string S occurs as a sentence, the most commonly used parts will be selected. Then, a dynamic programming algorithm was designed to figure out the solution of maximum probability. The algorithm optimizes the results of a genetic design based on a grammatical model and finds an optimal solution. In this way, redundant operations can be reduced and the time and cost required for conducting biological experiments can be minimized. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

Switching Fields in Physics: Finding the Right Job

NASA Astrophysics Data System (ADS)

Dowell, Marla

2004-05-01

The Bad News: fewer than one in ten recent Physics PhDs will land a faculty position in physics. The Good News: non-academic career opportunities for Physics PhDs are in abundance. The trick is finding the right job. With the explosion of web-based resume sites, identifying these opportunities and getting your resume seen by the right people can be both difficult and frustrating. Tough times call for creative solutions. My presentation, based on experience as both a job seeker and potential employer, will include recent data on the physics job market. I will discuss non-academic job opportunities and practical tools for finding and landing the right job, such as career guidance tests and networking methods. A word of warning, most serious job hunts are extremely time-consuming. If you're looking for opportunities outside your physics discipline, be prepared for a lot of rejection letters. The trick is to make the most out of those contacts since you never know where they may lead. Remember, while a plethora of job offers is nice, only the right one is necessary.

Remote sensing techniques in cultural resource management archaeology

NASA Astrophysics Data System (ADS)

Johnson, Jay K.; Haley, Bryan S.

2003-04-01

Cultural resource management archaeology in the United States concerns compliance with legislation set in place to protect archaeological resources from the impact of modern activities. Traditionally, surface collection, shovel testing, test excavation, and mechanical stripping are used in these projects. These methods are expensive, time consuming, and may poorly represent the features within archaeological sites. The use of remote sensing techniques in cultural resource management archaeology may provide an answer to these problems. Near-surface geophysical techniques, including magnetometry, resistivity, electromagnetics, and ground penetrating radar, have proven to be particularly successful at efficiently locating archaeological features. Research has also indicated airborne and satellite remote sensing may hold some promise in the future for large-scale archaeological survey, although this is difficult in many areas of the world where ground cover reflect archaeological features in an indirect manner. A cost simulation of a hypothetical data recovery project on a large complex site in Mississippi is presented to illustrate the potential advantages of remote sensing in a cultural resource management setting. The results indicate these techniques can save a substantial amount of time and money for these projects.

Setup for functional cell ablation with lasers: coupling of a laser to a microscope.

PubMed

Sweeney, Sean T; Hidalgo, Alicia; de Belle, J Steven; Keshishian, Haig

2012-06-01

The selective removal of cells by ablation is a powerful tool in the study of eukaryotic developmental biology, providing much information about their origin, fate, or function in the developing organism. In Drosophila, three main methods have been used to ablate cells: chemical, genetic, and laser ablation. Each method has its own applicability with regard to developmental stage and the cells to be ablated, and its own limitations. The primary advantage of laser-based ablation is the flexibility provided by the method: The operations can be performed in any cell pattern and at any time in development. Laser-based techniques permit manipulation of structures within cells, even to the molecular level. They can also be used for gene activation. However, laser ablation can be expensive, labor-intensive, and time-consuming. Although live cells can be difficult to image in Drosophila embryos, the use of vital fluorescent imaging methods has made laser-mediated cell manipulation methods more appealing; the methods are relatively straightforward. This article provides the information necessary for setting up and using a laser microscope for lasesr ablation studies.

Integrated Design and Implementation of Embedded Control Systems with Scilab

PubMed Central

Ma, Longhua; Xia, Feng; Peng, Zhe

2008-01-01

Embedded systems are playing an increasingly important role in control engineering. Despite their popularity, embedded systems are generally subject to resource constraints and it is therefore difficult to build complex control systems on embedded platforms. Traditionally, the design and implementation of control systems are often separated, which causes the development of embedded control systems to be highly time-consuming and costly. To address these problems, this paper presents a low-cost, reusable, reconfigurable platform that enables integrated design and implementation of embedded control systems. To minimize the cost, free and open source software packages such as Linux and Scilab are used. Scilab is ported to the embedded ARM-Linux system. The drivers for interfacing Scilab with several communication protocols including serial, Ethernet, and Modbus are developed. Experiments are conducted to test the developed embedded platform. The use of Scilab enables implementation of complex control algorithms on embedded platforms. With the developed platform, it is possible to perform all phases of the development cycle of embedded control systems in a unified environment, thus facilitating the reduction of development time and cost. PMID:27873827

Alternative method of removing otoliths from sturgeon

USGS Publications Warehouse

Chalupnicki, Marc A.; Dittman, Dawn E.

2016-01-01

Extracting the otoliths (ear bones) from fish that have very thick skulls can be difficult and very time consuming. The common practice of making a transverse vertical incision on the top of the skull with a hand or electrical saw may damage the otolith if not performed correctly. Sturgeons (Acipenseridae) are one family in particular that have a very large and thick skull. A new laboratory method entering the brain cavity from the ventral side of the fish to expose the otoliths was easier than other otolith extraction methods found in the literature. Methods reviewed in the literature are designed for the field and are more efficient at processing large quantities of fish quickly. However, this new technique was designed to be more suited for a laboratory setting when time is not pressing and successful extraction from each specimen is critical. The success of finding and removing otoliths using this technique is very high and does not compromise the structure in any manner. This alternative technique is applicable to other similar fish species for extracting the otoliths.

Analytical instrumentation infrastructure for combinatorial and high-throughput development of formulated discrete and gradient polymeric sensor materials arrays

NASA Astrophysics Data System (ADS)

Potyrailo, Radislav A.; Hassib, Lamyaa

2005-06-01

Multicomponent polymer-based formulations of optical sensor materials are difficult and time consuming to optimize using conventional approaches. To address these challenges, our long-term goal is to determine relationships between sensor formulation and sensor response parameters using new scientific methodologies. As the first step, we have designed and implemented an automated analytical instrumentation infrastructure for combinatorial and high-throughput development of polymeric sensor materials for optical sensors. Our approach is based on the fabrication and performance screening of discrete and gradient sensor arrays. Simultaneous formation of multiple sensor coatings into discrete 4×6, 6×8, and 8×12 element arrays (3-15μL volume per element) and their screening provides not only a well-recognized acceleration in the screening rate, but also considerably reduces or even eliminates sources of variability, which are randomly affecting sensors response during a conventional one-at-a-time sensor coating evaluation. The application of gradient sensor arrays provides additional capabilities for rapid finding of the optimal formulation parameters.

Thickness-Independent Ultrasonic Imaging Applied to Abrasive Cut-Off Wheels: An Advanced Aerospace Materials Characterization Method for the Abrasives Industry. A NASA Lewis Research Center Technology Transfer Case History

NASA Technical Reports Server (NTRS)

Roth, Don J.; Farmer, Donald A.

1998-01-01

Abrasive cut-off wheels are at times unintentionally manufactured with nonuniformity that is difficult to identify and sufficiently characterize without time-consuming, destructive examination. One particular nonuniformity is a density variation condition occurring around the wheel circumference or along the radius, or both. This density variation, depending on its severity, can cause wheel warpage and wheel vibration resulting in unacceptable performance and perhaps premature failure of the wheel. Conventional nondestructive evaluation methods such as ultrasonic c-scan imaging and film radiography are inaccurate in their attempts at characterizing the density variation because a superimposing thickness variation exists as well in the wheel. In this article, the single transducer thickness-independent ultrasonic imaging method, developed specifically to allow more accurate characterization of aerospace components, is shown to precisely characterize the extent of the density variation in a cut-off wheel having a superimposing thickness variation. The method thereby has potential as an effective quality control tool in the abrasives industry for the wheel manufacturer.

Temporal Texture Profile and Identification of Glass Transition Temperature as an Instrumental Predictor of Stickiness in a Caramel System.

PubMed

Mayhew, Emily J; Schmidt, Shelly J; Schlich, Pascal; Lee, Soo-Yeun

2017-09-01

Stickiness is an important texture attribute in many food systems, but its meaning can vary by person, product, and throughout mastication. This variability and complexity makes it difficult to devise analytical tests that accurately and consistently predict sensory stickiness. Glass transition temperature (T g ) is a promising candidate for texture prediction. Our objective is to elucidate the temporal profile of stickiness in order to probe the relationship between T g and dynamic stickiness perception. Nine caramel samples with diverse texture and thermal profiles were produced for sensory testing and differential scanning calorimetry. Sixteen trained panelists generated stickiness-relevant terms to be used in a subsequent temporal dominance of sensation (TDS) test with the same panelists. Following the TDS study, these panelists also rated samples for overall tactile and oral stickiness. Stickiness ratings were then correlated to TDS dominance parameters across the full evaluation period and within the first, middle, and final thirds of the evaluation period. Samples with temporal texture profiles dominated by tacky, stringy, and enveloping attributes consistently received the highest stickiness scores, although the correlation strength varied by time period. T g was found to correlate well with trained panelist and consumer ratings of oral (R 2 trained = 0.85; R 2 consumer = 0.96) and tactile (R 2 trained = 0.78; R 2 consumer = 0.79) stickiness intensity, and stickiness intensity ratings decreased with T g of completely amorphous samples. Further, glassy samples followed a different texture trajectory (brittle-cohesive-toothpacking) than rubbery samples (deformable-tacky-enveloping). These results illuminate the dynamic perception of stickiness and support the potential of T g to predict both stickiness intensity and texture trajectory in caramel systems. © 2017 Institute of Food Technologists®.

What Health and Aged Care Culture Change Models Mean for Residents and Their Families: A Systematic Review.

PubMed

Petriwskyj, Andrea; Parker, Deborah; Brown Wilson, Christine; Gibson, Alexandra

2016-04-01

A range of commercialized programs are increasingly being adopted which involve broad culture change within care organizations to implement person-centered care. These claim a range of benefits for clients; however, the published evidence for client and family outcomes from culture change is inconclusive and the evidence for these specific models is difficult to identify. The purpose of this review was to identify and evaluate the peer-reviewed evidence regarding consumer outcomes for these subscription-based models. The review followed the Joanna Briggs Institute procedure. The review considered peer-reviewed literature that reported on studies conducted with health and aged care services, their staff, and consumers, addressed subscription-based person-centered culture change models, and were published in English up to and including 2015. The review identified 19 articles of sufficient quality that reported evidence relating to consumer outcomes and experience. Resident outcomes and family and resident satisfaction and experiences were mixed. Findings suggest potential benefits for some outcomes, particularly related to quality of life and psychiatric symptoms, staff engagement, and functional ability. Although residents and families identified some improvements in residents' lives, both also identified problematic aspects of the change related to staff adjustment and staff time. Outcomes for these models are at best comparable with traditional care with limited suggestions that they result in poorer outcomes and sufficient potential for benefits to warrant further investigation. Although these models may have the potential to benefit residents, the implementation of person-centered principles may affect the outcomes. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

A longitudinal model of the dynamics between HMOs' consumer-friendliness and preventive health care utilization.

PubMed

Xiao, Qian; Savage, Grant T; Zhuang, Weiling

2014-01-01

This study aims at replicating and extending Xiao and Savage's (2008) research to understand the multidimensional aspect of HMOs distinguished by HMOs' consumer-friendliness, and their relationship to consumers' preventive care utilization. This study develops a dynamic model to consider both concurrent and time lagging effects of HMOs' consumer-friendliness. Our data analysis discloses similar relationship patterns as revealed by Xiao and Savage. Additionally, our findings reveal the time-series changes of the influence of HMOs' consumer-friendliness that either the effects of early experienced HMOs' consumer-friendliness wear out totally or HMOs' consumer-friendly characteristics on the concurrent term contain most of the explanatory power.

16 CFR 433.3 - Exemption of sellers taking or receiving open end consumer credit contracts before November 1...

Code of Federal Regulations, 2010 CFR

2010-01-01

... make loans, from time to time, directly from the creditor or indirectly by use of a credit card, check... open end consumer credit contracts before November 1, 1977 from requirements of § 433.2(a). 433.3... CONSUMERS' CLAIMS AND DEFENSES § 433.3 Exemption of sellers taking or receiving open end consumer credit...

Accurate estimation of camera shot noise in the real-time

NASA Astrophysics Data System (ADS)

Cheremkhin, Pavel A.; Evtikhiev, Nikolay N.; Krasnov, Vitaly V.; Rodin, Vladislav G.; Starikov, Rostislav S.

2017-10-01

Nowadays digital cameras are essential parts of various technological processes and daily tasks. They are widely used in optics and photonics, astronomy, biology and other various fields of science and technology such as control systems and video-surveillance monitoring. One of the main information limitations of photo- and videocameras are noises of photosensor pixels. Camera's photosensor noise can be divided into random and pattern components. Temporal noise includes random noise component while spatial noise includes pattern noise component. Temporal noise can be divided into signal-dependent shot noise and signal-nondependent dark temporal noise. For measurement of camera noise characteristics, the most widely used methods are standards (for example, EMVA Standard 1288). It allows precise shot and dark temporal noise measurement but difficult in implementation and time-consuming. Earlier we proposed method for measurement of temporal noise of photo- and videocameras. It is based on the automatic segmentation of nonuniform targets (ASNT). Only two frames are sufficient for noise measurement with the modified method. In this paper, we registered frames and estimated shot and dark temporal noises of cameras consistently in the real-time. The modified ASNT method is used. Estimation was performed for the cameras: consumer photocamera Canon EOS 400D (CMOS, 10.1 MP, 12 bit ADC), scientific camera MegaPlus II ES11000 (CCD, 10.7 MP, 12 bit ADC), industrial camera PixeLink PL-B781F (CMOS, 6.6 MP, 10 bit ADC) and video-surveillance camera Watec LCL-902C (CCD, 0.47 MP, external 8 bit ADC). Experimental dependencies of temporal noise on signal value are in good agreement with fitted curves based on a Poisson distribution excluding areas near saturation. Time of registering and processing of frames used for temporal noise estimation was measured. Using standard computer, frames were registered and processed during a fraction of second to several seconds only. Also the accuracy of the obtained temporal noise values was estimated.

77 FR 38305 - Agency Information Collection Activities; Announcement of Office of Management and Budget...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

...; ``Real Time'' Surveys of Consumers' Knowledge, Perceptions and Reported Behavior Concerning Foodborne...' Surveys of Consumers' Knowledge, Perceptions and Reported Behavior Concerning Foodborne Illness Outbreaks... ```Real Time' Surveys of Consumers' Knowledge, Perceptions and Reported Behavior Concerning Foodborne...

Anticholinergic toxicity in a one-year-old male following ingestion of Lupinus mutabilis seeds: case report.

PubMed

Flores-Pamo, Adrian Ernesto; Pisano, Elinor; Carreazo, Nilton Yhuri

2017-11-06

The seeds from Lupinus mutabilis Sweet, also called "chocho", are an important part of the diet in several countries in South America. Prior to consumption, processing is required to remove toxic alkaloids. These alkaloids are known to have pharmacological properties as antiarrhythmics, antimuscarinics and hypoglycemics. We report a case in which a one-year-old male initially presented with altered mental status and respiratory distress and subsequently developed symptoms of anticholinergic toxicity, after ingesting a large amount of chocho seeds. In spite of going through a difficult clinical condition, the subject evolved favorably through receiving supportive treatment. The seeds from Lupinus mutabilis provide nutritional benefits when consumed, but people need to know their risks when these seeds are consumed without proper preparation.

An examination of how alcohol brands use sport to engage consumers on social media.

PubMed

Westberg, Kate; Stavros, Constantino; Smith, Aaron C T; Munro, Geoff; Argus, Kevin

2018-01-01

To examine how alcohol brands use sport in their communication activities on social media. Despite extensive research exploring alcohol advertising and sponsorship through sport, minimal attention has been given to digital platforms. This study undertakes a qualitative content analysis to examine the social media activity of alcohol brands sponsoring the three largest spectator sports in Australia: Australian rules football, rugby league and cricket. Four sport-related social media strategies are identified through which alcohol brands solicit interaction with consumers, often involving co-creation of content and social activation. These strategies act as 'calls to action' and through the association of sport and alcohol encourage consumers to engage in competition, collaboration, celebration and consumption. These strategies are further strengthened by communications which draw upon themes of identity and camaraderie to resonate with the consumer. Sport-linked social media strategies utilised by alcohol brands extend beyond just promoting their product. They seek higher levels of engagement with the consumer to amplify and augment the connection between alcohol and the sport spectator experience. The discussion highlights the powerful combination of sport and social media as a mechanism by which these brands seek to interact with consumers and encourage them to both create and promote content to their social networks. These strategies allow alcohol brands to extend their marketing efforts in a manner which can elude alcohol codes and prove difficult for regulators to identify and control. [Westberg K, Stavros C, Smith ACT, Munro G, Argus K. An examination of how alcohol brands use sport to engage consumers on social media. Drug Alcohol Rev 2018;37:28-35]. © 2016 Australasian Professional Society on Alcohol and other Drugs.

How Non Consumers Differ from Consumers: A Qualitative Approach to Synthesize the Attributes of Iron Folic Acid End Users

PubMed Central

Bali, Surya; Tiwari, Sharad; Singh, Daneshwar; Arutagi, Viswanath; Kale, Saket; Pal, DInesh Kumar

2017-01-01

Introduction Anaemia continues to be a major hurdle to achieve optimum health in Indian population context. Although government continues to promote Iron Folic Acid (IFA) supplementation as one of the key strategies to combat with burden of anaemia, the expected level of IFA consumption and subsequent anaemia reduction could not be achieved. This study tries to investigate those influences, concerns, experiences and behaviour from an end user perspective through a qualitative methodology which may affect the IFA consumption ambi-directionally. Aim To explore and understand the several aspects related with anaemia and IFA supplementation with special emphasis to reveal the contributory factors behind low level of IFA consumption at consumer end. Materials and Methods A community based qualitative study was conducted in clusters identified through multileveled stratification from a state of central India. A conceptual construct was made in priory for this study. As the research question was related with policy, this study adapted a framework technique for making interview topic guides. Two consumers and two non consumers from each identified cluster were interviewed in depth. The data obtained through 160 in depth interviews (from 80 consumers and 80 non consumers) was utilized for thematic framework, linkage association and to typify the phenomenon. Results Ignorance, difficult intake, meaninglessness, misconceptions and discontentment with the system were the major dimensions (sub themes) associated with discontinuation. All these sub themes were further converged into major theme of informational discontinuity. Investigators further typified the users/non users into persistent user, potential defaulters, impending defaulters and absolute non users. Conclusion Informational gap seems to be the fundamental factor behind sub optimum IFA consumption. On a policy perspective, all the attempts should be done to instigate arise felt need’ among target groups for IFA consumption. PMID:28658813

Application of induction coil measurements to the study of superalloy hot corrosion and oxidation

NASA Technical Reports Server (NTRS)

Deadmore, D. L.

1984-01-01

The assessment of the degree of hot corrosion attack on nickel based alloys is a difficult task, especially when the definition specifies that it must be in terms of metal consumed and even more difficult if the measurement must be nondestructive. The inductance of a solenoid coil responds to changes in volume of fill and composition of metal cores, therefore, it may be used for nondestructive measurement of hot corrosion. The hot corrosion of U700 was studied at 900 C in a Mach 0.3 flame doped with 0.85 wppm of sodium. The change of inductance was found to define the known corrosion behavior and to suggest its use as a tool with predictive capabilities. Sufficient sensitivity exists to detect oxidation of this alloy at 900 C.

Application of information theory methods to food web reconstruction

USGS Publications Warehouse

Moniz, L.J.; Cooch, E.G.; Ellner, S.P.; Nichols, J.D.; Nichols, J.M.

2007-01-01

In this paper we use information theory techniques on time series of abundances to determine the topology of a food web. At the outset, the food web participants (two consumers, two resources) are known; in addition we know that each consumer prefers one of the resources over the other. However, we do not know which consumer prefers which resource, and if this preference is absolute (i.e., whether or not the consumer will consume the non-preferred resource). Although the consumers and resources are identified at the beginning of the experiment, we also provide evidence that the consumers are not resources for each other, and the resources do not consume each other. We do show that there is significant mutual information between resources; the model is seasonally forced and some shared information between resources is expected. Similarly, because the model is seasonally forced, we expect shared information between consumers as they respond to the forcing of the resources. The model that we consider does include noise, and in an effort to demonstrate that these methods may be of some use in other than model data, we show the efficacy of our methods with decreasing time series size; in this particular case we obtain reasonably clear results with a time series length of 400 points. This approaches ecological time series lengths from real systems.

Effective Listening: Five Lessons from the Best.

PubMed

Watson, Kittie W

For many nurses, especially when workloads are high, it can be difficult to listen carefully to patients. Federally mandated Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) surveys that help determine insurance reimbursement are asking patients how carefully their nurses listened. For Christian nurses, effective listening demonstrates the compassion, understanding, and care modeled by Jesus. An exploration of Jesus' responses reveals five ways Christ effectively listened to people that can guide nurses.

Abuse of Customer Premise Equipment and Recommended Actions

DTIC Science & Technology

2014-08-07

as reflectors. Descriptions of hacks and control of CPE are more difficult to provide, as such operations are more clandestine. DNS changer provides...connected to broadband Internet, as of July 2013. 7 In the United States, about 84% of those connections have a local home network, such as WiFi . 8...with 324 million WiFi -enabled consumer electronics devices shipped during 2013 in the United States alone. 10 Thus if there were a systematic

Ground controlled robotic assembly operations for Space Station Freedom

NASA Technical Reports Server (NTRS)

Parrish, Joseph C.

1991-01-01

A number of dextrous robotic systems and associated positioning and transportation devices are available on Space Station Freedom (SSF) to perform assembly tasks that would otherwise need to be performed by extravehicular activity (EVA) crewmembers. The currently planned operating mode for these robotic systems during the assembly phase is teleoperation by intravehicular activity (IVA) crewmembers. While this operating mode is less hazardous and expensive than manned EVA operations, and has insignificant control loop time delays, the amount of IVA time available to support telerobotic operations is much less than the anticipated requirements. Some alternative is needed to allow the robotic systems to perform useful tasks without exhausting the available IVA resources; ground control is one such alternative. The issues associated with ground control of SSF robotic systems to alleviate onboard crew time availability constraints are investigated. Key technical issues include the effect of communication time delays, the need for safe, reliable execution of remote operations, and required modifications to the SSF ground and flight system architecture. Time delay compensation techniques such as predictive displays and world model-based force reflection are addressed and collision detection and avoidance strategies to ensure the safety of the on-orbit crew, Orbiter, and SSF are described. Although more time consuming and difficult than IVA controlled teleoperations or manned EVA, ground controlled telerobotic operations offer significant benefits during the SSF assembly phase, and should be considered in assembly planning activities.

Consumer confidence in the safety of food and newspaper coverage of food safety issues: a longitudinal perspective.

PubMed

de Jonge, Janneke; Van Trijp, Hans; Renes, Reint Jan; Frewer, Lynn J

2010-01-01

This study develops a longitudinal perspective on consumer confidence in the safety of food to explore if, how, and why consumer confidence changes over time. In the first study, a theory-based monitoring instrument for consumer confidence in the safety of food was developed and validated. The monitoring instrument assesses consumer confidence together with its determinants. Model and measurement invariance were validated rigorously before developments in consumer confidence in the safety of food and its determinants were investigated over time. The results from the longitudinal analysis show that across four waves of annual data collection (2003-2006), the framework was stable and that the relative importance of the determinants of confidence was, generally, constant over time. Some changes were observed regarding the mean ratings on the latent constructs. The second study explored how newspaper coverage of food safety related issues affects consumer confidence in the safety of food through subjective consumer recall of food safety incidents. The results show that the newspaper coverage on food safety issues is positively associated with consumer recall of food safety incidents, both in terms of intensity and recency of media coverage.

Informed consent for and regulation of critical care research.

PubMed

Lemaire, François

2008-12-01

Critical care is a special area in which research needs to take place, because of the severity of the diseases which are treated there, but it is also a place where research faces a lot of hurdles and difficulties. The main cause of difficulties is the consent issue, as most patients cannot consent for themselves. Recently, all national legislations in the countries of the European Union have been modified to include the provisions of directive 2001/20. This review article provides a summary of the recent literature concerning the issue of consent for clinical care research such as how the surrogate consent reflects the view of the patient and how time consuming and inaccurate can be the consultation of a community before the start of a trial with a waiver of consent. Another hurdle to research is the rigidity of our legislations concerning clinical research, especially the absence of a simplified way for low or no-risk research. This article shows how this situation is potentially deleterious and how it could ultimately forbid low-risk research. Critical research remains a domain in which research on patients is difficult and controversial. Regulation can be difficult to implement, largely inadequate or uselessly complicated. Intensive care physicians need to keep pressure on politicians and lawmakers to constantly explain the necessity and specificities of critical care research.

Nurses' attitudes towards the reporting of violence in the emergency department.

PubMed

Hogarth, Kathryn M; Beattie, Jill; Morphet, Julia

2016-05-01

The incidence of workplace violence against nurses in emergency departments is underreported. Thus, the true nature and frequency of violent incidents remains unknown. It is therefore difficult to address the problem. To identify the attitudes, barriers and enablers of emergency nurses to the reporting of workplace violence. Using a phenomenological approach, two focus groups were conducted at a tertiary emergency department. The data were audio-recorded, transcribed verbatim and analysed using thematic analysis. Violent incidents in this emergency department were underreported. Nurses accepted violence as part of their normal working day, and therefore were less likely to report it. Violent incidents were not defined as 'violence' if no physical injury was sustained, therefore it was not reported. Nurses were also motivated to report formally in order to protect themselves from any possible future complaints made by perpetrators. The current formal reporting system was a major barrier to reporting because it was difficult and time consuming to use. Nurses reported violence using methods other than the designated reporting system. While emergency nurses do report violence, they do not use the formal reporting system. When they did use the formal reporting system they were motivated to do so in order to protect themselves. As a consequence of underreporting, the nature and extent of workplace violence remains unknown. Copyright © 2015 College of Emergency Nursing Australasia. Published by Elsevier Ltd. All rights reserved.

Forecasting of indirect consumables for a Job Shop

NASA Astrophysics Data System (ADS)

Shakeel, M.; Khan, S.; Khan, W. A.

2016-08-01

A job shop has an arrangement where similar machines (Direct consumables) are grouped together and use indirect consumables to produce a product. The indirect consumables include hack saw blades, emery paper, painting brush etc. The job shop is serving various orders at a particular time for the optimal operation of job shop. Forecasting is required to predict the demand of direct and indirect consumables in a job shop. Forecasting is also needed to manage lead time, optimize inventory cost and stock outs. The objective of this research is to obtain the forecast for indirect consumables. The paper shows how job shop can manage their indirect consumables more accurately by establishing a new technique of forecasting. This results in profitable use of job shop by multiple users.

The ACTIVATE study: results from a group-randomized controlled trial comparing a traditional worksite health promotion program with an activated consumer program.

PubMed

Terry, Paul E; Fowles, Jinnet Briggs; Xi, Min; Harvey, Lisa

2011-01-01

PURPOSE. This study compares a traditional worksite-based health promotion program with an activated consumer program and a control program DESIGN. Group randomized controlled trial with 18-month intervention. SETTING. Two large Midwestern companies. SUBJECTS. Three hundred and twenty employees (51% response). INTERVENTION. The traditional health promotion intervention offered population-level campaigns on physical activity, nutrition, and stress management. The activated consumer intervention included population-level campaigns for evaluating health information, choosing a health benefits plan, and understanding the risks of not taking medications as prescribed. The personal development intervention (control group) offered information on hobbies. The interventions also offered individual-level coaching for high risk individuals in both active intervention groups. MEASURES. Health risk status, general health status, consumer activation, productivity, and the ability to evaluate health information. ANALYSIS. Multivariate analyses controlled for baseline differences among the study groups. RESULTS. At the population level, compared with baseline performance, the traditional health promotion intervention improved health risk status, consumer activation, and the ability to recognize reliable health websites. Compared with baseline performance, the activated consumer intervention improved consumer activation, productivity, and the ability to recognize reliable health websites. At the population level, however, only the activated consumer intervention improved any outcome more than the control group did; that outcome was consumer activation. At the individual level for high risk individuals, both traditional health coaching and activated consumer coaching positively affected health risk status and consumer activation. In addition, both coaching interventions improved participant ability to recognize a reliable health website. Consumer activation coaching also significantly improved self-reported productivity. CONCLUSION. An effective intervention can change employee health risk status and activation both at the population level and at the individual high risk level. However, program engagement at the population level was low, indicating that additional promotional strategies, such as greater use of incentives, need to be examined. Less intensive coaching can be as effective as more intensive, albeit both interventions produced modest behavior change and retention in the consumer activation arm was most difficult. Further research is needed concerning recruitment and retention methods that will enable populations to realize the full potential of activated consumerism.

UV irradiation and autoclave treatment for elimination of contaminating DNA from laboratory consumables.

PubMed

Gefrides, Lisa A; Powell, Mark C; Donley, Michael A; Kahn, Roger

2010-02-01

Laboratories employ various approaches to ensure that their consumables are free of DNA contamination. They may purchase pre-treated consumables, perform quality control checks prior to casework, and use in-house profile databases for contamination detection. It is better to prevent contamination prior to DNA typing than identify it after samples are processed. To this end, laboratories may UV irradiate or autoclave consumables prior to use but treatment procedures are typically based on killing microorganisms and not on the elimination of DNA. We report a systematic study of UV and autoclave treatments on the persistence of DNA from saliva. This study was undertaken to determine the best decontamination strategy for the removal of DNA from laboratory consumables. We have identified autoclave and UV irradiation procedures that can eliminate nanogram quantities of contaminating DNA contained within cellular material. Autoclaving is more effective than UV irradiation because it can eliminate short fragments of contaminating DNA more effectively. Lengthy autoclave or UV irradiation treatments are required. Depending on bulb power, a UV crosslinker may take a minimum of 2h to achieve an effective dose for elimination of nanogram quantities of contaminating DNA (>7250mJ/cm(2)). Similarly autoclaving may also take 2h to eliminate similar quantities of contaminating DNA. For this study, we used dried saliva stains to determine the effective dose. Dried saliva stains were chosen because purified DNA as well as fresh saliva are less difficult to eradicate than dried stains and also because consumable contamination is more likely to be in the form of a collection of dry cells.

Labeling and advertising of home insulation. Final staff report to the Federal Trade Commission and proposed trade regulation rule (16 CFR Part 460)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Insulation can save significant amounts of fuel and money, and has therefore captured public attention as a desirable energy conservation measure. Because insulation is a very difficult product for uninformed consumers to evaluate, there was broad support for a rule requiring the disclosure of information facilitating choices among insulation products. With the information that the Recommended Rule will require, consumers will be able to compare the thermal properties of varous types of insulation and make the best purchases for their needs. In order to provide consumers, as quickly as possible, with information aiding their purchase of this major conservation measure,more » and to protect consumers from the abuses that rising demand has brought, the Commission undertook this rulemaking proceeding on an expedited schedule. The Rule was proposed on November 18, 1977. The tests mandated by the Rule will provide reproducible and accurate R-values, permitting comparisons of thermal performance. As a result of the testing and required disclosures of R-values and related information, consumers should be able to make sound choices for their needs, without being uninformed or misinformed about the relative values of different types of insulation. The Recommended Rule covers the testing, advertising, and labeling of thermal insulation products. It includes organic, fibrous, cellular, and reflective insulations sold for use in homes, apartments, and other residential dwellings. Insulation sold directly to consumers for do-it-yourself installation is covered, as well as insulation installed by professionals.« less

Use of food label information by urban consumers in India - a study among supermarket shoppers.

PubMed

Vemula, Sudershan R; Gavaravarapu, SubbaRao M; Mendu, Vishnu Vardhana Rao; Mathur, Pulkit; Avula, Laxmaiah

2014-09-01

To study consumer knowledge and use of food labels. A cross-sectional study employing both quantitative and qualitative methods. Intercept interviews were conducted with 1832 consumers at supermarket sites selected using a stratified random sampling procedure. This information was triangulated with twenty-one focus group discussions. New Delhi and Hyderabad, two metro-cities from north and south India. Adolescent (10-19 years), adult (20-59 years) and elderly (≥60 years) consumers. While the national urban literacy rate is 84 %, about 99 % of the study participants were educated. About 45 % reported that they buy pre-packaged foods once weekly and about a fifth buy them every day. Taste, quality, convenience and ease of use are the main reasons for buying pre-packaged foods. Although 90 % of consumers across the age groups read food labels, the majority (81 %) looked only for the manufacturing date or expiry/best before date. Of those who read labels, only a third checked nutrition information and ingredients. Nutrient information on labels was not often read because most consumers either lacked nutrition knowledge or found the information too technical to understand. About 60 % read quality symbols. A positive association was found between education level and checking various aspects of food labels. Women and girls concerned about 'fat' and 'sugar' intake read the nutrition facts panel. The intention of promoting healthy food choices through use of food labels is not being completely met. Since a majority of people found it difficult to comprehend nutrition information, there is a need to take up educational activities and/or introduce new forms of labelling.

What Is Direct-to-Consumer Genetic Testing?

MedlinePlus

... consumer genetic testing? What is direct-to-consumer genetic testing? Most of the time, genetic testing is ... testing. For more information about direct-to-consumer genetic testing: Centers for Disease Control and Prevention (CDC) ...

Does a time constraint modify results from rating-based conjoint analysis? Case study with orange/pomegranate juice bottles.

PubMed

Reis, Felipe; Machín, Leandro; Rosenthal, Amauri; Deliza, Rosires; Ares, Gastón

2016-12-01

People do not usually process all the available information on packages for making their food choices and rely on heuristics for making their decisions, particularly when having limited time. However, in most consumer studies encourage participants to invest a lot of time for making their choices. Therefore, imposing a time-constraint in consumer studies may increase their ecological validity. In this context, the aim of the present work was to evaluate the influence of a time-constraint on consumer evaluation of pomegranate/orange juice bottles using rating-based conjoint task. A consumer study with 100 participants was carried out, in which they had to evaluate 16 pomegranate/orange fruit juice bottles, differing in bottle design, front-of-pack nutritional information, nutrition claim and processing claim, and to rate their intention to purchase. Half of the participants evaluated the bottle images without time constraint and the other half had a time-constraint of 3s for evaluating each image. Eye-movements were recorded during the evaluation. Results showed that time-constraint when evaluating intention to purchase did not largely modify the way in which consumers visually processed bottle images. Regardless of the experimental condition (with or without time constraint), they tended to evaluate the same product characteristics and to give them the same relative importance. However, a trend towards a more superficial evaluation of the bottles that skipped complex information was observed. Regarding the influence of product characteristics on consumer intention to purchase, bottle design was the variable with the largest relative importance in both conditions, overriding the influence of nutritional or processing characteristics, which stresses the importance of graphic design in shaping consumer perception. Copyright © 2016 Elsevier Ltd. All rights reserved.

The relationships between consumer liking, sensory and chemical attributes of Vitis vinifera L. cv. Pinotage wines elaborated with different Oenococcus oeni starter cultures.

PubMed

Malherbe, Sulette; Menichelli, Elena; du Toit, Maret; Tredoux, Andreas; Muller, Nina; Naes, Tormod; Nieuwoudt, Hélène

2013-08-30

Malolactic fermentation (MLF) mediated by lactic acid bacteria (LAB) has been shown to modulate chemical and sensory attributes of wine. This study investigated the relation between consumer liking, chemical and sensory attributes of Vitis vinifera L. cv. Pinotage wines that were made over two vintages by four different lactic acid Oenococcus oeni starter cultures as well as a control treatment where MLF was prevented. Descriptive analysis showed that the sensory attributes buttery, caramel, vegetative flavour, fruity and nutty aroma differed significantly between the wines. These effects on the wines were not the same for the two vintages tested. Preference mapping results showed that the sensory attributes influenced the average consumer liking. The main chemical and sensory correlations found for MLF-treated wines were related to 2,3-butanedione (diacetyl) with the buttery character and various esters with fruity aromas. Although the direct effect of the bacterial starter cultures on wine sensory attributes is difficult to establish, and subject to variation over vintage, the present work suggests that the contribution of LAB starter cultures to wine sensory attributes can influence consumer liking. Selection of an MLF starter culture can thus potentially be used to develop specific wine styles. © 2013 Society of Chemical Industry.

Examining the concept of convenient collection: an application to extended producer responsibility and product stewardship frameworks.

PubMed

Wagner, Travis P

2013-03-01

Increasingly, Extended Producer Responsibility (EPR) and Product Stewardship (PS) frameworks are being adopted as a preferred policy approach to promote cost-effective diversion and recovery of post-consumer solid waste. Because the application of EPR/PS generally requires the creation of a separate and often parallel collection and/or management system, key to increasing the amount of waste recovered is to maximize the convenience of the collection system to maximize consumer participation. Convenient collection is often mandated in EPR/PS laws, however it is not defined. Convenience is a subjective construct rendering it extremely difficult to define. However, based on a dissection of post-consumer collection efforts under a generic EPR/PS system, this paper identifies and examines five categories of convenience - knowledge requirements, proximity to a collection site, opportunity to drop-off materials, the draw of the collection site, and the ease of the process-and the various factors of convenience within each of these categories. By using a simplified multiple criteria decision analysis, this paper proposes a performance matrix of criteria of convenience. Stakeholders can use this matrix to assist in the design, assessment, and/or implementation of a convenient post-consumer collection system under an EPR/PS framework. Copyright © 2012 Elsevier Ltd. All rights reserved.

Residential Customer Enrollment in Time-based Rate and Enabling Technology Programs: Smart Grid Investment Grant Consumer Behavior Study Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, Annika; Cappers, Peter; Goldman, Charles

2013-05-01

The U.S. Department of Energy’s (DOE’s) Smart Grid Investment Grant (SGIG) program is working with a subset of the 99 SGIG projects undertaking Consumer Behavior Studies (CBS), which examine the response of mass market consumers (i.e., residential and small commercial customers) to time-varying electricity prices (referred to herein as time-based rate programs) in conjunction with the deployment of advanced metering infrastructure (AMI) and associated technologies. The effort presents an opportunity to advance the electric industry’s understanding of consumer behavior.

Consumers' intention to use health recommendation systems to receive personalized nutrition advice.

PubMed

Wendel, Sonja; Dellaert, Benedict G C; Ronteltap, Amber; van Trijp, Hans C M

2013-04-04

Sophisticated recommendation systems are used more and more in the health sector to assist consumers in healthy decision making. In this study we investigate consumers' evaluation of hypothetical health recommendation systems that provide personalized nutrition advice. We examine consumers' intention to use such a health recommendation system as a function of options related to the underlying system (e.g. the type of company that generates the advice) as well as intermediaries (e.g. general practitioner) that might assist in using the system. We further explore if the effect of both the system and intermediaries on intention to use a health recommendation system are mediated by consumers' perceived effort, privacy risk, usefulness and enjoyment. 204 respondents from a consumer panel in the Netherlands participated. The data were collected by means of a questionnaire. Each respondent evaluated three hypothetical health recommendation systems on validated multi-scale measures of effort, privacy risk, usefulness, enjoyment and intention to use the system. To test the hypothesized relationships we used regression analyses. We find evidence that the options related to the underlying system as well as the intermediaries involved influence consumers' intention to use such a health recommendation system and that these effects are mediated by perceptions of effort, privacy risk, usefulness and enjoyment. Also, we find that consumers value usefulness of a system more and enjoyment less when a general practitioner advices them to use a health recommendation system than if they use it out of their own curiosity. We developed and tested a model of consumers' intention to use a health recommendation system. We found that intermediaries play an important role in how consumers evaluate such a system over and above options of the underlying system that is used to generate the recommendation. Also, health-related information services seem to rely on endorsement by the medical sector. This has considerable implications for the distribution as well as the communication channels of health recommendation systems which may be quite difficult to put into practice outside traditional health service channels.

The skin whitening industry in the Philippines.

PubMed

Mendoza, Roger Lee

2014-05-01

Skin whitening is a big and booming industry in many developing countries. Its popularity owes mainly to post-colonial, internalized racism. This study examines whether government intervention is necessary and more efficient than market-driven approaches in addressing the health risks and harms associated with skin whitening. We gathered empirical data on the quality and quantity of health-related information about skin whiteners with a multi-stage probability sample of consumers in two cities in the Philippines (n=110; α=0.05). Regardless of their socio-demographic characteristics, we find that cognitive biases and information asymmetries build and sustain consumers' trust in manufacturers and distributors of skin whiteners while, paradoxically, breeding uncertainties over the integrity of these products. The results are product adulteration and misbranding, leading to pricing advantages for toxic whiteners over safer products. This has impeded regulatory efficacy. We recommend anchoring government intervention in transaction cost-reduction, containing the externalities of skin bleaching, and institutionalizing third party partnerships. Failure to do so would leave consumers extremely vulnerable to the forces of supply and demand that favor toxic whiteners, particularly in a market where voluntary collective action is difficult to organize.

The Consumer Protection Act: no-fault liability of health care providers.

PubMed

Slabbert, M Nöthling; Pepper, Michael S

2011-11-01

The introduction of no-fault or strict liability by the Consumer Protection Act 68 of 2008 (CPA) poses serious problems in the health care context. With a patient as a 'consumer' in terms of the CPA, health care practitioners may find themselves as 'suppliers' or 'retailers' as part of a supply chain, and potentially liable for harm and loss suffered by a patient in terms of the new no-fault liability provision. The claimant (patient) can sue anyone in the supply chain in terms of this provision, which places the health care practitioner who delivered the care in a very difficult position, as he or she is the most easily and often only identifiable person in the supply chain. Although the causal link between the harm suffered by the complainant will still need to be established on a balance of probabilities, the traditional common law obstacle requiring proof of negligence no longer applies. The article argues that this situation is unsatisfactory, as it places an increasingly onerous burden on certain health care practitioners.

Tobacco or health in the Third World: a political economy perspective with emphasis on Mexico.

PubMed

Stebbins, K R

1987-01-01

In response to declining cigarette sales in the United States and Europe, transnational tobacco conglomerates have turned to the underdeveloped world to promote their unhealthy products for consumers who are at best only vaguely aware of the health risks associated with cigarette smoking. While cigarette sales in the Third World are growing "healthily," the consumers of these cigarettes generally are not. Along with the already difficult problems of malnutrition and communicable diseases, underdeveloped countries are facing the probability of a smoking epidemic, which is directly related to the penetration of capitalist tobacco interests into new markets. While the tobacco companies are quick to suggest that these people who can least afford cigarettes (both financially and in terms of health risks) are exercising their "free choice" as consumers in an "open marketplace," the author suggests that political and economic factors are central. Aided by two months of fieldwork in Mexico in 1986, the author examines smoking behavior and perceptions of associated health consequences. In addition, the influence of the tobacco companies and the Mexican government on tobacco production and consumption is analyzed.

Intermittent access to sweet high-fat liquid induces increased palatability and motivation to consume in a rat model of binge consumption

PubMed Central

Lardeux, Sylvie; Kim, James J.; Nicola, Saleem M.

2013-01-01

Binge eating disorders are characterized by discrete episodes of rapid and excessive food consumption. In rats, giving intermittent access to sweet fat food mimics this aspect of binge eating. These models typically employ solid food; however, the total amount consumed depends on motivation, palatability and satiety, which are difficult to dissociate with solid food. In contrast, lick microstructure analysis can be used to dissociate these parameters when the ingestant is a liquid. Therefore, we developed a binge model using a liquid emulsion composed of corn oil, heavy cream and sugar. We show that rats given intermittent access to this high-fat emulsion develop binge-like behavior comparable to that previously observed with solid high-fat food. One feature of this behavior was a gradual escalation in consumption across 2.5 weeks of intermittent access, which was not apparent in rats given lower-fat liquid on the same access schedule. Lick microstructure analysis suggests that this escalation was due at least in part to increases in both motivation to consume and palatability-driven consumption. PMID:23499930

Anticipatory Consumer Socialization.

ERIC Educational Resources Information Center

Moore, Roy L.; Moschis, George P.

Anticipatory consumer socialization is the learning of consumer roles and perceptions, which will be assumed at a later time, such as those that children acquire before they become adult consumers. A survey of 784 adolescents was conducted in a southern state to examine the anticipatory consumer socialization effects of such factors as the mass…

An investigation of used electronics return flows: a data-driven approach to capture and predict consumers storage and utilization behavior.

PubMed

Sabbaghi, Mostafa; Esmaeilian, Behzad; Raihanian Mashhadi, Ardeshir; Behdad, Sara; Cade, Willie

2015-02-01

Consumers often have a tendency to store their used, old or un-functional electronics for a period of time before they discard them and return them back to the waste stream. This behavior increases the obsolescence rate of used still-functional products leading to lower profitability that could be resulted out of End-of-Use (EOU) treatments such as reuse, upgrade, and refurbishment. These types of behaviors are influenced by several product and consumer-related factors such as consumers' traits and lifestyles, technology evolution, product design features, product market value, and pro-environmental stimuli. Better understanding of different groups of consumers, their utilization and storage behavior and the connection of these behaviors with product design features helps Original Equipment Manufacturers (OEMs) and recycling and recovery industry to better overcome the challenges resulting from the undesirable storage of used products. This paper aims at providing insightful statistical analysis of Electronic Waste (e-waste) dynamic nature by studying the effects of design characteristics, brand and consumer type on the electronics usage time and end of use time-in-storage. A database consisting of 10,063 Hard Disk Drives (HDD) of used personal computers returned back to a remanufacturing facility located in Chicago, IL, USA during 2011-2013 has been selected as the base for this study. The results show that commercial consumers have stored computers more than household consumers regardless of brand and capacity factors. Moreover, a heterogeneous storage behavior is observed for different brands of HDDs regardless of capacity and consumer type factors. Finally, the storage behavior trends are projected for short-time forecasting and the storage times are precisely predicted by applying machine learning methods. Copyright © 2014 Elsevier Ltd. All rights reserved.

Traditional and online consumers in China: a preliminary study of their personality traits and decision-making styles.

PubMed

Zhu, Junpeng; Xu, You; Huang, Jingyi; Yeow, Changdar; Wang, Wei

2012-12-01

Population of online consumers increases rapidly, but the decision-making styles of online consumers and psychiatric denominators such as the personality correlates remain unclear. In 196 traditional, and 196 age-, education- and gender-matched online consumers, we have tested the Zuckerman-Kuhlman Personality Questionnaire (ZKPQ) and the Consumer Style Inventory (CSI). After exploratory and confirmatory factor analyses, we have defined a five-factor model CSI with 24 items. Online consumers scored lower on ZKPQ Neuroticism-Anxiety and higher on Aggression-Hostility than traditional ones did, and scored higher on CSI Novelty-fashion consciousness and Brand consciousness, and lower on Time consciousness than the traditional consumers did. ZKPQ Neuroticism-Anxiety was positively correlated with CSI Confused by overchoice in both groups, Sociability was positively correlated with Novelty-fashion consciousness and negatively with Time consciousness in traditional group, and Impulsive Sensation Seeking was positively correlated with Novelty-fashion consciousness and Time consciousness in online group. Our study suggests that, regarding the decision-making styles, online consumers display curiosity that lacks security and need other ways to improve their social lives. It also calls further designs to address the contributions of other psychiatric features to the particular decision-making styles in online consumers.

Sustainable governance of scarce metals: the case of lithium.

PubMed

Prior, Timothy; Wäger, Patrick A; Stamp, Anna; Widmer, Rolf; Giurco, Damien

2013-09-01

Minerals and metals are finite resources, and recent evidence suggests that for many, primary production is becoming more difficult and more expensive. Yet these resources are fundamentally important for society--they support many critical services like infrastructure, telecommunications and energy generation. A continued reliance on minerals and metals as service providers in modern society requires dedicated and concerted governance in relation to production, use, reuse and recycling. Lithium provides a good example to explore possible sustainable governance strategies. Lithium is a geochemically scarce metal (being found in a wide range of natural systems, but in low concentrations that are difficult to extract), yet recent studies suggest increasing future demand, particularly to supply the lithium in lithium-ion batteries, which are used in a wide variety of modern personal and commercial technologies. This paper explores interventions for sustainable governance and handling of lithium for two different supply and demand contexts: Australia as a net lithium producer and Switzerland as a net lithium consumer. It focuses particularly on possible nation-specific issues for sustainable governance in these two countries' contexts, and links these to the global lithium supply chain and demand scenarios. The article concludes that innovative business models, like 'servicizing' the lithium value chain, would hold sustainable governance advantages for both producer and consumer countries. Copyright © 2013 Elsevier B.V. All rights reserved.

SUPRA: open-source software-defined ultrasound processing for real-time applications : A 2D and 3D pipeline from beamforming to B-mode.

PubMed

Göbl, Rüdiger; Navab, Nassir; Hennersperger, Christoph

2018-06-01

Research in ultrasound imaging is limited in reproducibility by two factors: First, many existing ultrasound pipelines are protected by intellectual property, rendering exchange of code difficult. Second, most pipelines are implemented in special hardware, resulting in limited flexibility of implemented processing steps on such platforms. With SUPRA, we propose an open-source pipeline for fully software-defined ultrasound processing for real-time applications to alleviate these problems. Covering all steps from beamforming to output of B-mode images, SUPRA can help improve the reproducibility of results and make modifications to the image acquisition mode accessible to the research community. We evaluate the pipeline qualitatively, quantitatively, and regarding its run time. The pipeline shows image quality comparable to a clinical system and backed by point spread function measurements a comparable resolution. Including all processing stages of a usual ultrasound pipeline, the run-time analysis shows that it can be executed in 2D and 3D on consumer GPUs in real time. Our software ultrasound pipeline opens up the research in image acquisition. Given access to ultrasound data from early stages (raw channel data, radiofrequency data), it simplifies the development in imaging. Furthermore, it tackles the reproducibility of research results, as code can be shared easily and even be executed without dedicated ultrasound hardware.

An experimental methodology for a fuzzy set preference model

NASA Technical Reports Server (NTRS)

Turksen, I. B.; Willson, Ian A.

1992-01-01

A flexible fuzzy set preference model first requires approximate methodologies for implementation. Fuzzy sets must be defined for each individual consumer using computer software, requiring a minimum of time and expertise on the part of the consumer. The amount of information needed in defining sets must also be established. The model itself must adapt fully to the subject's choice of attributes (vague or precise), attribute levels, and importance weights. The resulting individual-level model should be fully adapted to each consumer. The methodologies needed to develop this model will be equally useful in a new generation of intelligent systems which interact with ordinary consumers, controlling electronic devices through fuzzy expert systems or making recommendations based on a variety of inputs. The power of personal computers and their acceptance by consumers has yet to be fully utilized to create interactive knowledge systems that fully adapt their function to the user. Understanding individual consumer preferences is critical to the design of new products and the estimation of demand (market share) for existing products, which in turn is an input to management systems concerned with production and distribution. The question of what to make, for whom to make it and how much to make requires an understanding of the customer's preferences and the trade-offs that exist between alternatives. Conjoint analysis is a widely used methodology which de-composes an overall preference for an object into a combination of preferences for its constituent parts (attributes such as taste and price), which are combined using an appropriate combination function. Preferences are often expressed using linguistic terms which cannot be represented in conjoint models. Current models are also not implemented an individual level, making it difficult to reach meaningful conclusions about the cause of an individual's behavior from an aggregate model. The combination of complex aggregate models and vague linguistic preferences has greatly limited the usefulness and predictive validity of existing preference models. A fuzzy set preference model that uses linguistic variables and a fully interactive implementation should be able to simultaneously address these issues and substantially improve the accuracy of demand estimates. The parallel implementation of crisp and fuzzy conjoint models using identical data not only validates the fuzzy set model but also provides an opportunity to assess the impact of fuzzy set definitions and individual attribute choices implemented in the interactive methodology developed in this research. The generalized experimental tools needed for conjoint models can also be applied to many other types of intelligent systems.

How involuntary commitment impacts on the burden of care of the family.

PubMed

Hallam, Larissa

2007-08-01

Little research has examined how, or if, involuntary commitment has impacted on the burden experienced by the family. This paper reports a qualitative study which explored how involuntary commitment under the Mental Health Act (MHA) 2000 in Queensland, Australia impacted on families of people with mental illness. Family members of a person with a mental illness, under involuntary commitment at the time or in the previous 12 months, participated in focus groups. Thematic analysis was used to determine the themes. It was apparent from the views of the family that the use of the involuntary commitment was influenced greatly by the pressures experienced by the mental health services (MHS). The MHA did little to assist the family in gaining access to MHS. It was not until after the family made repeated attempts that they were taken seriously. Often the family had few options other than to use deceit and threats to obtain the necessary treatment required. In view of this, the inherit nature of what involuntary commitment implies for persons under it, such as refusing treatment and management difficulties, indicates the family with such an individual experience more hardship in trying to obtain assistance for that person. Thus, the MHA in Queensland has not met its goals of increasing access to MHS. Family members perceive that they were not being listened to and their concerns were not acted upon. The current culture of the MHS appears to serve, to a large degree, to estrange the family from the consumer making relationships difficult and time-consuming to repair. The mental health profession is urged to consider the culture within their workplace and move towards constructive involvement of the family.

Building a better sticky trap: description of an easy-to-use trap and pole mount for quantifying the abundance of adult aquatic insects

USGS Publications Warehouse

Smith, Joshua T.; Kennedy, Theodore A.; Muehlbauer, Jeffrey D.

2014-01-01

Insect emergence is a fundamental process in freshwaters. It is a critical life-history stage for aquatic insects and provides an important prey resource for terrestrial and aquatic consumers. Sticky traps are increasingly being used to sample these insects. The most common design consists of an acetate sheet coated with a nondrying adhesive that is attached to a wire frame or cylinder. These traps must be prepared at the deployment site, a process that can be time consuming and difficult given the vagaries of field conditions. Our goals were to develop a sturdy, low-cost sticky trap that could be prepared in advance, rapidly deployed and recovered in the field, and used to estimate the flight direction of insects. We used 150-mm Petri dishes with lids. The dishes can be coated cleanly and consistently with Tangle-Trap® adhesive. Deploying traps is simple and requires only a pole set near the body of water being sampled. Four dishes can be attached to the pole using Velcro and aligned in 4 different directions to enable quantification of insect flight direction. After sampling, Petri dishes can be taped closed, packed in boxes, and stored indefinitely. Petri traps are comparable in price to standard acetate sheet traps at ∼US$0.50/directional deployment, but they require more space for storage than acetate sheet traps. However, a major benefit of Petri traps is that field deployment times are ⅓ those of acetate traps. Our study demonstrated that large Petri dishes are an ideal platform for sampling postemergent adult aquatic insects, particularly when the study design involves estimating flight direction and when rapid deployment and recovery of traps is critical.

FRAGSION: ultra-fast protein fragment library generation by IOHMM sampling.

PubMed

Bhattacharya, Debswapna; Adhikari, Badri; Li, Jilong; Cheng, Jianlin

2016-07-01

Speed, accuracy and robustness of building protein fragment library have important implications in de novo protein structure prediction since fragment-based methods are one of the most successful approaches in template-free modeling (FM). Majority of the existing fragment detection methods rely on database-driven search strategies to identify candidate fragments, which are inherently time-consuming and often hinder the possibility to locate longer fragments due to the limited sizes of databases. Also, it is difficult to alleviate the effect of noisy sequence-based predicted features such as secondary structures on the quality of fragment. Here, we present FRAGSION, a database-free method to efficiently generate protein fragment library by sampling from an Input-Output Hidden Markov Model. FRAGSION offers some unique features compared to existing approaches in that it (i) is lightning-fast, consuming only few seconds of CPU time to generate fragment library for a protein of typical length (300 residues); (ii) can generate dynamic-size fragments of any length (even for the whole protein sequence) and (iii) offers ways to handle noise in predicted secondary structure during fragment sampling. On a FM dataset from the most recent Critical Assessment of Structure Prediction, we demonstrate that FGRAGSION provides advantages over the state-of-the-art fragment picking protocol of ROSETTA suite by speeding up computation by several orders of magnitude while achieving comparable performance in fragment quality. Source code and executable versions of FRAGSION for Linux and MacOS is freely available to non-commercial users at http://sysbio.rnet.missouri.edu/FRAGSION/ It is bundled with a manual and example data. chengji@missouri.edu Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Inspection of Pole-Like Structures Using a Visual-Inertial Aided VTOL Platform with Shared Autonomy

PubMed Central

Sa, Inkyu; Hrabar, Stefan; Corke, Peter

2015-01-01

This paper presents an algorithm and a system for vertical infrastructure inspection using a vertical take-off and landing (VTOL) unmanned aerial vehicle and shared autonomy. Inspecting vertical structures such as light and power distribution poles is a difficult task that is time-consuming, dangerous and expensive. Recently, micro VTOL platforms (i.e., quad-, hexa- and octa-rotors) have been rapidly gaining interest in research, military and even public domains. The unmanned, low-cost and VTOL properties of these platforms make them ideal for situations where inspection would otherwise be time-consuming and/or hazardous to humans. There are, however, challenges involved with developing such an inspection system, for example flying in close proximity to a target while maintaining a fixed stand-off distance from it, being immune to wind gusts and exchanging useful information with the remote user. To overcome these challenges, we require accurate and high-update rate state estimation and high performance controllers to be implemented onboard the vehicle. Ease of control and a live video feed are required for the human operator. We demonstrate a VTOL platform that can operate at close-quarters, whilst maintaining a safe stand-off distance and rejecting environmental disturbances. Two approaches are presented: Position-Based Visual Servoing (PBVS) using an Extended Kalman Filter (EKF) and estimator-free Image-Based Visual Servoing (IBVS). Both use monocular visual, inertia, and sonar data, allowing the approaches to be applied for indoor or GPS-impaired environments. We extensively compare the performances of PBVS and IBVS in terms of accuracy, robustness and computational costs. Results from simulations and indoor/outdoor (day and night) flight experiments demonstrate the system is able to successfully inspect and circumnavigate a vertical pole. PMID:26340631

The application of "integrated marketing communications" to social marketing and health communication: organizational challenges and implications.

PubMed

Nowak, G; Cole, G; Kirby, S; Freimuth, V; Caywood, C

1998-01-01

Influencing consumer behavior is a difficult and often resource-intensive undertaking, with success usually requiring identifying, describing, and understanding target audiences; solid product and/or service positioning relative to competitors; and significant media and communication resources. Integrated marketing communication (IMC) is a new way of organizing and managing persuasive communication tools and functions which involves realigning communications to consider the flow of information from an organization from the viewpoint of end consumers. Although the application of IMC to social marketing remains relatively unexplored, the IMC literature and recent efforts by the US Centers for Disease Prevention and Control suggest that integrated communication approaches have much to offer social marketing and health communication efforts. IMC, IMC and social marketing, and implications of IMC for public and private sector social marketing programs are discussed.

Knowledge, attitudes and behaviours related to dietary salt among adults in the state of Victoria, Australia 2015.

PubMed

Grimes, Carley A; Kelley, Sarah-Jane; Stanley, Sonya; Bolam, Bruce; Webster, Jacqui; Khokhar, Durreajam; Nowson, Caryl A

2017-05-30

Information on consumer's knowledge, attitudes and behaviours (KABs) related to salt can be used to inform awareness and education campaigns and serve as a baseline measure to monitor changes in KABs over time. The aim of this study was to determine KABs related to salt intake among Victorian adults. Cross-sectional survey conducted in Victorian adults aged 18-65 years. Participants were recruited from shopping centres located in Melbourne and Geelong and via online methods (Facebook and Consumer Research Panel) to complete an online survey assessing KABs related to dietary salt. Descriptive statistics (mean (SD) or n (%)) were used to report survey findings. A total of 2398 participants provided a valid survey (mean age 43 years (SD 13), 57% female). The majority (80%) were born in Australia and 63% were the main household grocery shopper. The majority (89%) were aware of the health risks associated with a high salt intake. Eighty three percent believed that Australians eat too much salt. Three quarters (75%) correctly identified salt from processed foods as being the main source of salt in the diet. Less than a third (29%) of participants believed their own individual salt intake exceeded dietary recommendations and only 28% could correctly identify the maximum recommended daily intake for salt. Just under half (46%) of participants were concerned about the amount of salt in food. Almost two thirds (61%) of participants believed that there should be laws which limit the amount of salt added to manufactured foods and 58% agreed that it was difficult to find lower salt options when eating out. The findings of this study serve as a baseline assessment of KABs related to salt intake in Victorian adults and can be used to assess changes in salt related KABs over time. Public concern about salt is low as many people remain unaware of their own salt intake. An increased awareness of the excessive amount of salt consumed and increased availability of lower salt foods are likely to reduce population salt intake.

DNA barcoding unveils skate (Chondrichthyes: Rajidae) species diversity in ‘ray’ products sold across Ireland and the UK

PubMed Central

Egan, Aaron; Fox, Jennifer; Greenfield, Adam; Mariani, Stefano

2013-01-01

Skates are widely consumed across the globe, but many large species are subject to considerable concern regarding their conservation and management. Within Europe such issues have recently driven policy changes so that, for the first time, reports of skate landings now have to be made under species-specific names. Total allowable catches have also been established for many groups, which have been set to zero for a number of the most vulnerable species (e.g., Dipturus batis, Raja undulata and Rostoraja alba). Whilst accurate species identification has become an important issue for landings, the sale of skates is still usually made under a blanket term of “skate” or “ray”. The matter of identifying species of skate is further complicated by their morphologically conservative nature and the fact that they are commercially valued for their wings. Thus, before sale their bodies are usually discarded (i.e., “winged”) and often skinned, making morphological identification impossible. For the first time, DNA barcoding (of the mitochondrial COI gene) was applied to samples of skate wings from retail outlets across the British Isles, providing insight into which species are sold for consumption. A total of 98 wing samples were analysed, revealing that six species were sold; blonde ray (Raja brachyura), spotted ray (Raja montagui), thornback ray (Raja clavata), cuckoo ray (Leucoraja naevus) small-eyed ray (Raja microocellata) and shagreen ray (Leucoraja fullonica). Statistical testing demonstrated that there were significant differences in the species sold in the distinct retail groups which suggests complex drivers behind the patterns of sale in skates. The results also indicate that endangered species are not commonly being passed on to consumers. In addition, the practice of selling skate wings under ambiguous labels is highlighted as it makes it extremely difficult for consumers to exercise a right to avoid species of conservation concern. Interestingly, a single retailer chain labelled their wings as originating from three smaller-growing species (generally to be considered of lower conservation concern); of the six samples analysed from this company a third were mislabelled and originated from the thornback ray (a larger species that is currently undergoing population declines). PMID:24024082

DNA barcoding unveils skate (Chondrichthyes: Rajidae) species diversity in 'ray' products sold across Ireland and the UK.

PubMed

Griffiths, Andrew Mark; Miller, Dana D; Egan, Aaron; Fox, Jennifer; Greenfield, Adam; Mariani, Stefano

2013-01-01

Skates are widely consumed across the globe, but many large species are subject to considerable concern regarding their conservation and management. Within Europe such issues have recently driven policy changes so that, for the first time, reports of skate landings now have to be made under species-specific names. Total allowable catches have also been established for many groups, which have been set to zero for a number of the most vulnerable species (e.g., Dipturus batis, Raja undulata and Rostoraja alba). Whilst accurate species identification has become an important issue for landings, the sale of skates is still usually made under a blanket term of "skate" or "ray". The matter of identifying species of skate is further complicated by their morphologically conservative nature and the fact that they are commercially valued for their wings. Thus, before sale their bodies are usually discarded (i.e., "winged") and often skinned, making morphological identification impossible. For the first time, DNA barcoding (of the mitochondrial COI gene) was applied to samples of skate wings from retail outlets across the British Isles, providing insight into which species are sold for consumption. A total of 98 wing samples were analysed, revealing that six species were sold; blonde ray (Raja brachyura), spotted ray (Raja montagui), thornback ray (Raja clavata), cuckoo ray (Leucoraja naevus) small-eyed ray (Raja microocellata) and shagreen ray (Leucoraja fullonica). Statistical testing demonstrated that there were significant differences in the species sold in the distinct retail groups which suggests complex drivers behind the patterns of sale in skates. The results also indicate that endangered species are not commonly being passed on to consumers. In addition, the practice of selling skate wings under ambiguous labels is highlighted as it makes it extremely difficult for consumers to exercise a right to avoid species of conservation concern. Interestingly, a single retailer chain labelled their wings as originating from three smaller-growing species (generally to be considered of lower conservation concern); of the six samples analysed from this company a third were mislabelled and originated from the thornback ray (a larger species that is currently undergoing population declines).

Automated Generation of Technical Documentation and Provenance for Reproducible Research

NASA Astrophysics Data System (ADS)

Jolly, B.; Medyckyj-Scott, D.; Spiekermann, R.; Ausseil, A. G.

2017-12-01

Data provenance and detailed technical documentation are essential components of high-quality reproducible research, however are often only partially addressed during a research project. Recording and maintaining this information during the course of a project can be a difficult task to get right as it is a time consuming and often boring process for the researchers involved. As a result, provenance records and technical documentation provided alongside research results can be incomplete or may not be completely consistent with the actual processes followed. While providing access to the data and code used by the original researchers goes some way toward enabling reproducibility, this does not count as, or replace, data provenance. Additionally, this can be a poor substitute for good technical documentation and is often more difficult for a third-party to understand - particularly if they do not understand the programming language(s) used. We present and discuss a tool built from the ground up for the production of well-documented and reproducible spatial datasets that are created by applying a series of classification rules to a number of input layers. The internal model of the classification rules required by the tool to process the input data is exploited to also produce technical documentation and provenance records with minimal additional user input. Available provenance records that accompany input datasets are incorporated into those that describe the current process. As a result, each time a new iteration of the analysis is performed the documentation and provenance records are re-generated to provide an accurate description of the exact process followed. The generic nature of this tool, and the lessons learned during its creation, have wider application to other fields where the production of derivative datasets must be done in an open, defensible, and reproducible way.

A Diagnostics Tool to detect ensemble forecast system anomaly and guide operational decisions

NASA Astrophysics Data System (ADS)

Park, G. H.; Srivastava, A.; Shrestha, E.; Thiemann, M.; Day, G. N.; Draijer, S.

2017-12-01

The hydrologic community is moving toward using ensemble forecasts to take uncertainty into account during the decision-making process. The New York City Department of Environmental Protection (DEP) implements several types of ensemble forecasts in their decision-making process: ensemble products for a statistical model (Hirsch and enhanced Hirsch); the National Weather Service (NWS) Advanced Hydrologic Prediction Service (AHPS) forecasts based on the classical Ensemble Streamflow Prediction (ESP) technique; and the new NWS Hydrologic Ensemble Forecasting Service (HEFS) forecasts. To remove structural error and apply the forecasts to additional forecast points, the DEP post processes both the AHPS and the HEFS forecasts. These ensemble forecasts provide mass quantities of complex data, and drawing conclusions from these forecasts is time-consuming and difficult. The complexity of these forecasts also makes it difficult to identify system failures resulting from poor data, missing forecasts, and server breakdowns. To address these issues, we developed a diagnostic tool that summarizes ensemble forecasts and provides additional information such as historical forecast statistics, forecast skill, and model forcing statistics. This additional information highlights the key information that enables operators to evaluate the forecast in real-time, dynamically interact with the data, and review additional statistics, if needed, to make better decisions. We used Bokeh, a Python interactive visualization library, and a multi-database management system to create this interactive tool. This tool compiles and stores data into HTML pages that allows operators to readily analyze the data with built-in user interaction features. This paper will present a brief description of the ensemble forecasts, forecast verification results, and the intended applications for the diagnostic tool.

Molecular Rotation Signals: Molecule Chemistry and Particle Physics

NASA Astrophysics Data System (ADS)

Grabow, Jens-Uwe

2015-06-01

Molecules - large or small - are attractive academic resources, with numerous questions on their chemical behaviour as well as problems in fundamental physics now (or still) waiting to be answered: Targeted by high-resolution spectroscopy, a rotating molecular top can turn into a laboratory for molecule chemistry or a laboratory for particle physics. Once successfully entrained (many species - depending on size and chemical composition - have insufficient vapour pressures or are of transient nature, such that specifically designed pulsed-jet sources are required for their transfer into the gas phase or in-situ generation) into the collision-free environment of a supersonic-jet expansion, each molecular top comes with its own set of challenges, theoretically and experimentally: Multiple internal interactions are causing complicated energy level schemes and the resulting spectra will be rather difficult to predict theoretically. Experimentally, these spectra are difficult to assess and assign. With today's broad-banded chirp microwave techniques, finding and identifying such spectral features have lost their major drawback of being very time consuming for many molecules. For other molecules, the unrivalled resolution and sensitivity of the narrow-banded impulse microwave techniques provide a window to tackle - at the highest precision available to date - fundamental questions in physics, even particle physics - potentially beyond the standard model. Molecular charge distribution, properties of the chemical bond, details on internal dynamics and intermolecular interaction, the (stereo-chemical) molecular structure (including the possibility of their spatial separation) as well as potential evidence for tiny yet significant interactions encode their signature in pure molecular rotation subjected to time-domain microwave spectroscopic techniques. Ongoing exciting technical developments promise rapid progress. We present recent examples from Hannover, new directions, and an outlook at the future of molecular rotation spectroscopy.

Quantifying usability: an evaluation of a diabetes mHealth system on effectiveness, efficiency, and satisfaction metrics with associated user characteristics.

PubMed

Georgsson, Mattias; Staggers, Nancy

2016-01-01

Mobile health (mHealth) systems are becoming more common for chronic disease management, but usability studies are still needed on patients' perspectives and mHealth interaction performance. This deficiency is addressed by our quantitative usability study of a mHealth diabetes system evaluating patients' task performance, satisfaction, and the relationship of these measures to user characteristics. We used metrics in the International Organization for Standardization (ISO) 9241-11 standard. After standardized training, 10 patients performed representative tasks and were assessed on individual task success, errors, efficiency (time on task), satisfaction (System Usability Scale [SUS]) and user characteristics. Tasks of exporting and correcting values proved the most difficult, had the most errors, the lowest task success rates, and consumed the longest times on task. The average SUS satisfaction score was 80.5, indicating good but not excellent system usability. Data trends showed males were more successful in task completion, and younger participants had higher performance scores. Educational level did not influence performance, but a more recent diabetes diagnosis did. Patients with more experience in information technology (IT) also had higher performance rates. Difficult task performance indicated areas for redesign. Our methods can assist others in identifying areas in need of improvement. Data about user background and IT skills also showed how user characteristics influence performance and can provide future considerations for targeted mHealth designs. Using the ISO 9241-11 usability standard, the SUS instrument for satisfaction and measuring user characteristics provided objective measures of patients' experienced usability. These could serve as an exemplar for standardized, quantitative methods for usability studies on mHealth systems. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association.

Quantifying usability: an evaluation of a diabetes mHealth system on effectiveness, efficiency, and satisfaction metrics with associated user characteristics

PubMed Central

Staggers, Nancy

2016-01-01

Objective Mobile health (mHealth) systems are becoming more common for chronic disease management, but usability studies are still needed on patients’ perspectives and mHealth interaction performance. This deficiency is addressed by our quantitative usability study of a mHealth diabetes system evaluating patients’ task performance, satisfaction, and the relationship of these measures to user characteristics. Materials and Methods We used metrics in the International Organization for Standardization (ISO) 9241-11 standard. After standardized training, 10 patients performed representative tasks and were assessed on individual task success, errors, efficiency (time on task), satisfaction (System Usability Scale [SUS]) and user characteristics. Results Tasks of exporting and correcting values proved the most difficult, had the most errors, the lowest task success rates, and consumed the longest times on task. The average SUS satisfaction score was 80.5, indicating good but not excellent system usability. Data trends showed males were more successful in task completion, and younger participants had higher performance scores. Educational level did not influence performance, but a more recent diabetes diagnosis did. Patients with more experience in information technology (IT) also had higher performance rates. Discussion Difficult task performance indicated areas for redesign. Our methods can assist others in identifying areas in need of improvement. Data about user background and IT skills also showed how user characteristics influence performance and can provide future considerations for targeted mHealth designs. Conclusion Using the ISO 9241-11 usability standard, the SUS instrument for satisfaction and measuring user characteristics provided objective measures of patients’ experienced usability. These could serve as an exemplar for standardized, quantitative methods for usability studies on mHealth systems. PMID:26377990

Approximation of Gas Volume in a Seafloor Sediment using Time Domain Reflectometry in the Okhotsk Sea

NASA Astrophysics Data System (ADS)

Aoki, S.; Noborio, K.; Matsumoto, R.

2013-12-01

Global warming has accelerated in recent decades as the concentration of carbon dioxide has increased in the atmosphere due to fossil fuel burning. In addition, increases in consuming fossil fuels have led to their depletion in recent years. One practical measure to meet these two challenges is the conversion of energy resources to natural gas that has less environmental impact. Gas hydrates that contain natural gas have been discovered in the sea around Japan. They are expected to serve as a new non-conventional natural gas resource. To understand the mechanism of gas hydrate accumulation, the amount of free gas in sediments should be known. However, it is difficult to measure this non-destructively without affecting other properties. In this study we examined a technique for measuring the amount of free gas using Time Domain Reflectometry (TDR). TDR was a method of measuring the dielectric constant of the soil. This method is based on the relationship between the volumetric water content and dielectric constant, to estimate the volumetric water content indirectly. TDR has commonly been used to measure the moisture content of soil such as cultivation and paddy. In our study, we used TDR to estimate the gas ratio in the sea-bottom sediment obtained from the Sea of Okhotsk. Measurement by the TDR method was difficult in a high electrical conductivity solution such as seawater. Therefore, we blunted the measurement sensitivity by coating TDR probe with plastic, which makes it possible to measure. We found that the gas phase rates differed depending on the depth and location, so gas phase existed up to about 10%.

OLYMPUS DISS - A Readily Implemented Geographic Data and Information Sharing System

NASA Astrophysics Data System (ADS)

Necsoiu, D. M.; Winfrey, B.; Murphy, K.; McKague, H. L.

2002-12-01

Electronic information technology has become a crucial component of business, government, and scientific organizations. In this technology era, many enterprises are moving away from the perception that information repositories are only a tool for decision-making. Instead, many organizations are learning that information systems, which are capable of organizing and following the interrelations between information and both the short-term and strategic organizational goals, are assets themselves, with inherent value. Olympus Data and Information Sharing System (DISS) is a system developed at the Center for Nuclear Waste Regulatory Analyses (CNWRA) to solve several difficult tasks associated with the management of geographical, geological and geophysical data. Three of the tasks were to (1) gather the large amount of heterogeneous information that has accumulated over the operational lifespan of CNWRA, (2) store the data in a central, knowledge-based, searchable database and (3) create quick, easy, convenient, and reliable access to that information. Faced with these difficult tasks CNWRA identified the requirements for designing such a system. Key design criteria were: (a) ability to ingest different data formats (i.e., raster, vector, and tabular data); (b) minimal expense using open-source and commercial off-the-shelf software; (c) seamless management of geospatial data, freeing up time for researchers to focus on analyses or algorithm development, rather than on time consuming format conversions; (d) controlled access; and (e) scalable architecture to meet new and continuing demands. Olympus DISS is a solution that can be easily adapted to small and mid-size enterprises dealing with heterogeneous geographic data. It uses established data standards, provides a flexible mechanism to build applications upon and output geographic data in multiple and clear ways. This abstract is an independent product of the CNWRA and does not necessarily reflect the views or regulatory position of the Nuclear Regulatory Commission.

The impact of services that offer individualised funds, shared management, person-centred relationships, and self-direction on the lived experiences of consumers with mental illness.

PubMed

Peterson, Sunila; Buchanan, Angus; Falkmer, Torbjorn

2014-01-01

Mental health service providers across Australia, including Western Australia (WA), have begun to offer individualised funds, shared management, person-centred and self-directed (SPS) services. No research exists on the impact of SPS services on the lived experiences of these particular consumers. This study explored the impact of a SPS service offered for the first time in WA to consumers with mental illness. Data on sixteen consumers' lived experiences were analysed using an abbreviated grounded theory approach. These data had been developed by the consumers, Guides (staff) and an independent evaluator, and most of it had been collected in the past prior to the commencement of the study. Three over-arching categories, and related subcategories, emerged indicating that 1) access to individualised funds enabled practical and psychological benefits to consumers; 2) consistent contact in shared management and person-centred relationships enhanced the provision of timely and meaningful staff support to consumers; and 3) high quality shared management and person-centred relationships with staff and the opportunity to self-direct enabled consumers' change and growth. SPS services enhanced consumers' lived experiences and enabled staff to provide and consumers to experience timely access to recovery resources, consistent contact, responsive and high quality support, and self-direction of services. In this, consumers changed, grew and achieved desired recovery experiences. The overall impact of the SPS service seemed to be founded on the goodness of fit between person characteristics of staff and consumers, which enabled rich support that provided for corrective emotional experiences. This enabled consumers to build meaningful and hopeful lives where they started to live with, and beyond, their mental illness.

Factors affecting dry-cured ham consumer acceptability.

PubMed

Morales, R; Guerrero, L; Aguiar, A P S; Guàrdia, M D; Gou, P

2013-11-01

The objectives of the present study were (1) to compare the relative importance of price, processing time, texture and intramuscular fat in purchase intention of dry-cured ham through conjoint analysis, (2) to evaluate the effect of dry-cured ham appearance on consumer expectations, and (3) to describe the consumer sensory preferences of dry-cured ham using external preference mapping. Texture and processing time influenced the consumer preferences in conjoint analysis. Red colour intensity, colour uniformity, external fat and white film presence/absence influenced consumer expectations. The consumer disliked hams with bitter and metallic flavour and with excessive saltiness and piquantness. Differences between expected and experienced acceptability were found, which indicates that the visual preference of consumers does not allow them to select a dry-cured ham that satisfies their sensory preferences of flavour and texture. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Effects of Consumer Education on Consumer Search.

ERIC Educational Resources Information Center

Fast, Janet; And Others

1989-01-01

A study investigated the relationship between selected consumer and marketplace characteristics and consumers' prepurchase allocation of search time among information sources (product test reports; dealer sales representatives; advertisements; family and friends). The household production model proved useful; written educational materials appeared…

Socio-economic differences in takeaway food consumption among adults.

PubMed

Miura, Kyoko; Giskes, Katrina; Turrell, Gavin

2012-02-01

To examine socio-economic differences in the frequency and types of takeaway foods consumed. A cross-sectional postal survey. Participants were asked about their usual consumption of overall takeaway food (<4 times/month or ≥4 times/month) and of twenty-two specific takeaway food items (<1 time/month or ≥1 time/month); these latter foods were grouped into 'healthy' and 'less healthy' choices. Socio-economic position was measured on the basis of educational level and equivalised household income, and differences in takeaway food consumption were assessed by calculating prevalence ratios using log binomial regression. Adults aged 25-64 years from Brisbane, Australia, were randomly selected from the electoral roll (n 903; 63·7 % response rate). Compared with their more educated counterparts, the least educated were more regular consumers of overall takeaway food and fruit or vegetable juice and less regular consumers of sushi. For the 'less healthy' items, the least educated more regularly consumed potato chips, savoury pies, fried chicken and non-diet soft drinks; however, the least educated were less likely to consume curry. Household income was not associated with overall takeaway consumption. The lowest-income group was a more regular consumer of fruit or vegetable juice compared with the highest-income group. Among the 'less healthy' items, the lowest-income group was a more regular consumer of fried fish, ice cream and milk shakes, whereas curry was consumed less regularly. The frequency and types of takeaway foods consumed by socio-economically disadvantaged groups may contribute to inequalities in overweight or obesity and to chronic disease.

12 CFR 227.22 - Unfair acts or practices regarding time to make payment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... THE FEDERAL RESERVE SYSTEM UNFAIR OR DECEPTIVE ACTS OR PRACTICES (REGULATION AA) Consumer Credit Card.... Except as provided in paragraph (c) of this section, a bank must not treat a payment on a consumer credit card account as late for any purpose unless the consumer has been provided a reasonable amount of time...

75 FR 36639 - Change in Times for Meeting of Chronic Hazard Advisory Panel on Phthalates and Phthalate...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-28

... children's toys and child care articles, pursuant to section 108 of the Consumer Product Safety Improvement..., pursuant to section 108 of the Consumer Product Safety Improvement Act of 2008 (CPSIA) (Pub. L. 110-314... CONSUMER PRODUCT SAFETY COMMISSION Change in Times for Meeting of Chronic Hazard Advisory Panel on...

Usual Choline Intakes Are Associated with Egg and Protein Food Consumption in the United States

PubMed Central

Wallace, Taylor C.; Fulgoni, Victor L.

2017-01-01

Choline is an essential nutrient with critical roles in several biological processes including neuronal development, cell signaling, nerve impulse transmission, and lipid transport and metabolism. The National Cancer Institute method was used to assess usual intakes of choline from foods according to data for participants enrolled in the National Health and Nutrition Examination Survey 2009–2014 datasets and pregnant women in the 2005–2014 datasets. Suboptimal intakes of choline are present across many gender and life-stage subpopulations, as well as pregnant women in the U.S. Only 8.03 ± 0.56% of adults and 8.51 ± 2.89% pregnant women meet the AI for choline. Children 2–3 years were the most likely to meet their gender and life-stage specific AI, followed by children 4–8 years. Adults 19+ years who consume eggs were more likely to meet their gender and life-stage AI as compared to non-consumers (57.3 ± 1.45% and 2.43 ± 0.28%). Consumers of eggs had almost double the usual intake of choline as compared to non-consumers (525 ± 5.17 mg/d and 294 ± 1.98; p < 0.0001). Protein food (meat, poultry and seafood) consumption also increased usual choline intakes compared to non-consumers (345 ± 2.21 mg/day and 235 ± 8.81; p < 0.0001) to a lesser degree, but did not result in substantial increases in the percent of individuals meeting the AI. No subpopulation exceeded the UL for choline. This research illustrates that it is extremely difficult to achieve the AI for choline without consuming eggs or taking a dietary supplement. PMID:28783055

Usual Choline Intakes Are Associated with Egg and Protein Food Consumption in the United States.

PubMed

Wallace, Taylor C; Fulgoni, Victor L

2017-08-05

Choline is an essential nutrient with critical roles in several biological processes including neuronal development, cell signaling, nerve impulse transmission, and lipid transport and metabolism. The National Cancer Institute method was used to assess usual intakes of choline from foods according to data for participants enrolled in the National Health and Nutrition Examination Survey 2009-2014 datasets and pregnant women in the 2005-2014 datasets. Suboptimal intakes of choline are present across many gender and life-stage subpopulations, as well as pregnant women in the U.S. Only 8.03 ± 0.56% of adults and 8.51 ± 2.89% pregnant women meet the AI for choline. Children 2-3 years were the most likely to meet their gender and life-stage specific AI, followed by children 4-8 years. Adults 19+ years who consume eggs were more likely to meet their gender and life-stage AI as compared to non-consumers (57.3 ± 1.45% and 2.43 ± 0.28%). Consumers of eggs had almost double the usual intake of choline as compared to non-consumers (525 ± 5.17 mg/d and 294 ± 1.98; p < 0.0001). Protein food (meat, poultry and seafood) consumption also increased usual choline intakes compared to non-consumers (345 ± 2.21 mg/day and 235 ± 8.81; p < 0.0001) to a lesser degree, but did not result in substantial increases in the percent of individuals meeting the AI. No subpopulation exceeded the UL for choline. This research illustrates that it is extremely difficult to achieve the AI for choline without consuming eggs or taking a dietary supplement.

Moderate doses of commercial preparations of Ginkgo biloba do not alter markers of liver function but moderate alcohol intake does: A new approach to identify and quantify biomarkers of 'adverse effects' of dietary supplements.

PubMed

Lieberman, Harris R; Kellogg, Mark D; Fulgoni, Victor L; Agarwal, Sanjiv

2017-03-01

It is difficult to determine if certain dietary supplements are safe for human consumption. Extracts of leaves of Ginkgo biloba trees are dietary supplements used for various purported therapeutic benefits. However, recent studies reported they increased risk of liver cancer in rodents. Therefore, this study assessed the association between ginkgo consumption and liver function using NHANES 2001-2012 data (N = 29,684). Since alcohol is known to adversely affect liver function, association of its consumption with liver function was also assessed. Alcohol and ginkgo extract intake of adult consumers and clinical markers of liver function (alkaline phosphatase, alanine aminotransferase, aspartate aminotransferase, gamma glutamyl transferase, lactate dehydrogenase, bilirubin) were examined. Moderate consumers of alcohol (0.80 ± 0.02 drinks/day) had higher levels of aspartate aminotransferase and gamma glutamyl transferase than non-consumers (P < 0.001). There was no difference (P > 0.01) in levels of markers of liver function in 616 ginkgo consumers (65.1 ± 4.4 mg/day intake) compared to non-consumers. While moderate alcohol consumption was associated with changes in markers of liver function, ginkgo intake as typically consumed by U.S. adults was not associated with these markers. Biomarkers measured by NHANES may be useful to examine potential adverse effects of dietary supplements for which insufficient human adverse event and toxicity data are available. Not applicable, as this is secondary analysis of publicly released observational data (NHANES 2001-2012). Published by Elsevier Inc.

An investigation of used electronics return flows: A data-driven approach to capture and predict consumers storage and utilization behavior

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sabbaghi, Mostafa, E-mail: mostafas@buffalo.edu; Esmaeilian, Behzad, E-mail: b.esmaeilian@neu.edu; Raihanian Mashhadi, Ardeshir, E-mail: ardeshir@buffalo.edu

Highlights: • We analyzed a data set of HDDs returned back to an e-waste collection site. • We studied factors that affect the storage behavior. • Consumer type, brand and size are among factors which affect the storage behavior. • Commercial consumers have stored computers more than household consumers. • Machine learning models were used to predict the storage behavior. - Abstract: Consumers often have a tendency to store their used, old or un-functional electronics for a period of time before they discard them and return them back to the waste stream. This behavior increases the obsolescence rate of usedmore » still-functional products leading to lower profitability that could be resulted out of End-of-Use (EOU) treatments such as reuse, upgrade, and refurbishment. These types of behaviors are influenced by several product and consumer-related factors such as consumers’ traits and lifestyles, technology evolution, product design features, product market value, and pro-environmental stimuli. Better understanding of different groups of consumers, their utilization and storage behavior and the connection of these behaviors with product design features helps Original Equipment Manufacturers (OEMs) and recycling and recovery industry to better overcome the challenges resulting from the undesirable storage of used products. This paper aims at providing insightful statistical analysis of Electronic Waste (e-waste) dynamic nature by studying the effects of design characteristics, brand and consumer type on the electronics usage time and end of use time-in-storage. A database consisting of 10,063 Hard Disk Drives (HDD) of used personal computers returned back to a remanufacturing facility located in Chicago, IL, USA during 2011–2013 has been selected as the base for this study. The results show that commercial consumers have stored computers more than household consumers regardless of brand and capacity factors. Moreover, a heterogeneous storage behavior is observed for different brands of HDDs regardless of capacity and consumer type factors. Finally, the storage behavior trends are projected for short-time forecasting and the storage times are precisely predicted by applying machine learning methods.« less

The Field Artillery Battalion on the Nuclear Battlefield

DTIC Science & Technology

1975-06-06

flexibility of radio communications. The drawback to tactical wire communications is that the estao- lishment and maintenance of the system is time consuming ...Adjusted fires are a much simpler, though time consum - ing mission. Whatever the inaccuracies in target location, 16 . ■■■ ■’■"’ rgfimtm...SCP). The current practice of a separate SCP for the 8", SP battalion is both time consuming and illogical. Service support The application of the

Consumers’ intention to use health recommendation systems to receive personalized nutrition advice

PubMed Central

2013-01-01

Background Sophisticated recommendation systems are used more and more in the health sector to assist consumers in healthy decision making. In this study we investigate consumers' evaluation of hypothetical health recommendation systems that provide personalized nutrition advice. We examine consumers' intention to use such a health recommendation system as a function of options related to the underlying system (e.g. the type of company that generates the advice) as well as intermediaries (e.g. general practitioner) that might assist in using the system. We further explore if the effect of both the system and intermediaries on intention to use a health recommendation system are mediated by consumers' perceived effort, privacy risk, usefulness and enjoyment. Methods 204 respondents from a consumer panel in the Netherlands participated. The data were collected by means of a questionnaire. Each respondent evaluated three hypothetical health recommendation systems on validated multi-scale measures of effort, privacy risk, usefulness, enjoyment and intention to use the system. To test the hypothesized relationships we used regression analyses. Results We find evidence that the options related to the underlying system as well as the intermediaries involved influence consumers' intention to use such a health recommendation system and that these effects are mediated by perceptions of effort, privacy risk, usefulness and enjoyment. Also, we find that consumers value usefulness of a system more and enjoyment less when a general practitioner advices them to use a health recommendation system than if they use it out of their own curiosity. Conclusions We developed and tested a model of consumers' intention to use a health recommendation system. We found that intermediaries play an important role in how consumers evaluate such a system over and above options of the underlying system that is used to generate the recommendation. Also, health-related information services seem to rely on endorsement by the medical sector. This has considerable implications for the distribution as well as the communication channels of health recommendation systems which may be quite difficult to put into practice outside traditional health service channels. PMID:23557363

National Economic Policies: The Impact on Consumer Welfare. Proceedings of the American Council on Consumer Interests Annual Conference (29th, Kansas City, Missouri, March 16-19, 1983).

ERIC Educational Resources Information Center

Goebel, Karen P., Ed.

These proceedings contain the texts of the papers presented at a conference on consumer interests. Addressed in the first series of concurrent sessions are the following topics: consumers' new economic positions, consumers' choices with respect to price and quality trade-offs, time value in consumption decisions, and consumer information issues.…

Laparoscopic baseline ability assessment by virtual reality.

PubMed

Madan, Atul K; Frantzides, Constantine T; Sasso, Lisa M

2005-02-01

Assessment of any surgical skill is time-consuming and difficult. Currently, there are no accepted metrics for most surgical skills, especially laparoscopic skills. Virtual reality has been utilized for laparoscopic training of surgical residents. Our hypothesis is that this technology can be utilized for laparoscopic ability metrics. This study involved medical students with no previous laparoscopic experience. All students were taken into a porcine laboratory in order to assess two operative tasks (measuring a piece of bowel and placing a piece of bowel into a laparoscopic bag). Then they were taken into an inanimate lab with a Minimally Invasive Surgery Trainer-Virtual Reality (MIST-VR). Each student repeatedly performed one task (placing a virtual reality ball into a receptacle). The students' scores and times from the animate lab were compared with average economy of movement and times from the MIST-VR. The MIST-VR scored both hands individually. Thirty-two first- and second-year medical students were included in the study. There was statistically significant (P < 0.05) correlation between 11 of 16 possible relationships between the virtual reality trainer and operative tasks. While not all of the possible relationships demonstrated statistically significant correlation, the majority of the possible relationships demonstrated statistically significant correlation. Virtual reality may be an avenue for measuring laparoscopic surgical ability.

Rapid detection of AAC(6')-Ib-cr production using a MALDI-TOF MS strategy.

PubMed

Pardo, C-A; Tan, R N; Hennequin, C; Beyrouthy, R; Bonnet, R; Robin, F

2016-12-01

Plasmid-mediated quinolone resistance mechanisms have become increasingly prevalent among Enterobacteriaceae strains since the 1990s. Among these mechanisms, AAC(6')-Ib-cr is the most difficult to detect. Different detection methods have been developed, but they require expensive procedures such as Sanger sequencing, pyrosequencing, polymerase chain reaction (PCR) restriction, or the time-consuming phenotypic method of Wachino. In this study, we describe a simple matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) method which can be easily implemented in clinical laboratories that use the MALDI-TOF technique for bacterial identification. We tested 113 strains of Enterobacteriaceae, of which 64 harbored the aac(6')-Ib-cr gene. We compared two MALDI-TOF strategies, which differed by their norfloxacin concentration (0.03 vs. 0.5 g/L), and the method of Wachino with the PCR and sequencing strategy used as the reference. The MALDI-TOF strategy, performed with 0.03 g/L norfloxacin, and the method of Wachino yielded the same high performances (Se = 98 %, Sp = 100 %), but the turnaround time of the MALDI-TOF strategy was faster (<5 h), simpler, and inexpensive (<1 Euro). Our study shows that the MALDI-TOF strategy has the potential to become a major method for the detection of many different enzymatic resistance mechanisms.

ENSO-Based Index Insurance: Approach and Peru Flood Risk Management Application

NASA Astrophysics Data System (ADS)

Khalil, A. F.; Kwon, H.; Lall, U.; Miranda, M. J.; Skees, J. R.

2006-12-01

Index insurance has recently been advocated as a useful risk transfer tool for disaster management situations where rapid fiscal relief is desirable, and where estimating insured losses may be difficult, time consuming, or subject to manipulation and falsification. For climate related hazards, a rainfall or temperature index may be proposed. However, rainfall may be highly spatially variable relative to the gauge network, and in many locations data are inadequate to develop an index due to short time-series and the spatial dispersion of stations. In such cases, it may be helpful to consider a climate proxy index as a regional rainfall index. This is particularly useful if a long record is available for the climate index through an independent source and it is well correlated with the regional rainfall hazard. Here, ENSO related climate indices are explored for use as a proxy to extreme rainfall in one of the departments of Peru -- Piura. The ENSO index insurance product may be purchased by banks or microfinance institutions (MFIs) to aid agricultural damage relief in Peru. Crop losses in the region are highly correlated with floods, but are difficult to assess directly. Beyond agriculture, many other sectors suffer as well. Basic infrastructure is destroyed during the most severe events. This disrupts trade for many micro-enterprises. The reliability and quality of the local rainfall data is variable. Averaging the financial risk across the region is desirable. Some issues with the implementation of the proxy ENSO index are identified and discussed. Specifically, we explore (a) the reliability of the index at different levels of probability of exceedance of maximum seasonal rainfall; (b) the potential for clustering of payoffs; (c) the potential that the index could be predicted with some lead time prior to the flood season; and (d) evidence for climate change or non-stationarity in the flood exceedance probability from the long ENSO record. Finally, prospects for the global application of an ENSO based index insurance product are discussed.

Case study: a health check-up for the corporate IT department.

PubMed

Clark, Frank; Kimmerly, William

2004-01-01

As advances such as the electronic charting, closed-loop medication safety, physician order entry, consumer portals, electronic collaboration, and wireless access become the norm, central IS organizations are finding it difficult to keep pace. This challenge is exacerbated by declining margins, severe cost pressures, increased regulation, and added public scrutiny. Is your centralized IS organization healthy enough to meet the challenges presented by today's complex, demanding, dynamic healthcare delivery environments? How do you know? What factors do you consider?

Child labor: a global problem on the rise.

PubMed

Papesca, L K; Joss, D M

1996-01-01

This paper intends to review and analyse the literature focusing on the topic of child labor. Child labor is a global problem on the rise despite modern Western beliefs. Today, such complex and interrelated issues as poverty, illiteracy, and politics fuel the growth of the number of children being exploited for economic gain. It is often difficult to imagine that the products we purchase are manufactured in such horrible conditions, but as consumers we must take responsibility for the well-being of these children.

Demand artifact: objectively detecting biased participants in advertising research.

PubMed

Miller, Felicia; Schertzer, Susan

2014-12-01

Detecting and reducing the effect of biased participants continues to be an important task for researchers. However, the lack of objective measures to assess demand artifact has made it difficult to effectively address this issue. This paper reports two experiments that apply a theory-based post-experimental inquiry that can systematically identify biased participants in consumer research. The results demonstrate how easily and effectively researchers can incorporate this tool into experimental studies of all types and reduce the likelihood of systematic error.

Assessment of time management attitudes among health managers.

PubMed

Sarp, Nilgun; Yarpuzlu, Aysegul Akbay; Mostame, Fariba

2005-01-01

These days, working people are finding it difficult to manage their time, get more done at work, and find some balance in their work and personal lives. Successful time management is often suggested to be a product of organizing skills, however, what works for one person may not work for others. Context current competence assessment formats for physicians, health professionals, and managers during their training years reliably test core knowledge and basic skills. However, they may underemphasize some important domains of professional medical practice. Thus, in addition to assessments of basic skills, new formats that assess clinical reasoning, expert judgment, management of ambiguity, professionalism, time management, learning strategies, and teamwork to promise a multidimensional assessment while maintaining adequate reliability and validity in classic health education and health care institutional settings are needed to be worked on. It should be kept in mind that institutional support, reflection, and mentoring must accompany the development of assessment programs. This study was designed to describe the main factors that consume time, effective hours of work, time management opportunities, and attitudes and behaviors of health professionals and managers on time management concept through assessment by the assessment tool Time Management Inquiry Form (TMIQ-F). The study was conducted at the State Hospital, Social Security Hospital, and University Hospital at Kirikkale, Turkey between October 1999 and January 2000, including 143 subjects defined as medical managers and medical specialists. According to the results, a manager should give priority to the concept of planning, which may be counted among the efficient time management techniques, and educate him/herself on time management.

The unmet needs of all adults with ADHD are not the same: a focus on Europe.

PubMed

Ginsberg, Ylva; Beusterien, Kathleen Marie; Amos, Kaitlan; Jousselin, Claude; Asherson, Philip

2014-07-01

This review discusses the unmet needs in adult ADHD subgroups in Europe: adolescents in transition, adult patients, employees, older adults, and those in the criminal justice system. Analysis of the literature and an ADHD web forum was conducted. The visibility of adult ADHD remains low, and finding professionals able to diagnose is difficult for both adolescents as well as adults. Many ADHD cases go undiagnosed and untreated; ADHD may be mistaken for other common mental health conditions or missed in the presence of comorbidities. Pharmacological and psychosocial treatment services are very limited. Most employers do not understand how to address ADHD, and employees fear stigmatization. Older age individuals (>60 years) may feel worse with unrecognized ADHD, and those incarcerated with ADHD are likely to cost disproportionately more than their peers, with high recidivism rates. Strategies to address unmet needs and accommodate ADHD adults need not be expensive or time consuming to implement.

Medicines for the mind: policy-based "pull" incentives for creating breakthrough CNS drugs.

PubMed

Choi, Dennis W; Armitage, Robert; Brady, Linda S; Coetzee, Timothy; Fisher, William; Hyman, Steven; Pande, Atul; Paul, Steven; Potter, William; Roin, Benjamin; Sherer, Todd

2014-11-05

Several large pharmaceutical companies have selectively downsized their neuroscience research divisions, reflecting a growing view that developing drugs to treat brain diseases is more difficult and often more time-consuming and expensive than developing drugs for other therapeutic areas, and thus represents a weak area for investment. These withdrawals reduce global neuroscience translational capabilities and pose a serious challenge to society's interests in ameliorating the impact of nervous system diseases. While the path forward ultimately lies in improving understandings of disease mechanisms, many promising therapeutic approaches have already been identified, and rebalancing the underlying risk/reward calculus could help keep companies engaged in making CNS drugs. One way to do this that would not require upfront funding is to change the policies that regulate market returns for the most-needed breakthrough drugs. The broader neuroscience community including clinicians and patients should convene to develop and advocate for such policy changes. Copyright © 2014 Elsevier Inc. All rights reserved.

Business Process Modeling: Perceived Benefits

NASA Astrophysics Data System (ADS)

Indulska, Marta; Green, Peter; Recker, Jan; Rosemann, Michael

The process-centered design of organizations and information systems is globally seen as an appropriate response to the increased economic pressure on organizations. At the methodological core of process-centered management is process modeling. However, business process modeling in large initiatives can be a time-consuming and costly exercise, making it potentially difficult to convince executive management of its benefits. To date, and despite substantial interest and research in the area of process modeling, the understanding of the actual benefits of process modeling in academia and practice is limited. To address this gap, this paper explores the perception of benefits derived from process modeling initiatives, as reported through a global Delphi study. The study incorporates the views of three groups of stakeholders - academics, practitioners and vendors. Our findings lead to the first identification and ranking of 19 unique benefits associated with process modeling. The study in particular found that process modeling benefits vary significantly between practitioners and academics. We argue that the variations may point to a disconnect between research projects and practical demands.

A New Optical Bench Concept for Space-Based Laser Interferometric Gravitational Wave Missions

NASA Astrophysics Data System (ADS)

Chilton, Andrew; Apple, Stephen; Ciani, Giacomo; Olatunde, Taiwo; Conklin, John; Mueller, Guido

2015-04-01

Space-based interferometric gravitational wave detectors such as LISA have been proposed to detect low-frequency gravitational wave sources such as the inspirals of compact objects into massive black holes or two massive black holes into each other. The optical components used to perform the high-precision interferometry required to make these measurements have historically been bonded to Zerodur optical benches, which are thermally ultrastable but difficult and time-consuming to manufacture. More modern implementations of LISA-like interferometry have reduced the length stability requirement on these benches from 30fm/√{Hz} to a few pm √{ Hz}. We therefore propose to alter the design of the optical bench in such a way as to no longer require the use of Zerodur; instead, we plan to replace it with more easily-used materials such as titanium or molybdenum. In this presentation, we discuss the current status of and future plans for the construction and testing of such an optical bench.

Multileaf collimator characteristics and reliability requirements for IMRT Elekta system.

PubMed

Liu, Chihray; Simon, Thomas A; Fox, Christopher; Li, Jonathan; Palta, Jatinder R

2008-01-01

Understanding the characteristics of a multileaf collimator (MLC) system, modeling MLC in a treatment planning system, and maintaining the mechanical accuracy of the linear accelerator gantry head system are important factors in the safe implementation of an intensity-modulated radiotherapy program. We review the characteristics of an Elekta MLC system, discuss the necessary MLC modeling parameters for a treatment planning system, and provide a novel method to establish an MLC leaf position quality assurance program. To perform quality assurance on 40 pairs of individual MLC leaves is a time-consuming and difficult task. In this report, an effective routine MLC quality assurance method based on the field edge of a backup jaw as referenced in conjunction with a diode array as a radiation detector system is discussed. The sensitivity of this test for determining the relative leaf positions was observed to be better than 0.1 mm. The Elekta MLC leaf position accuracy measured with this system has been better than 0.3 mm.

High-Throughput and Cost-Effective Characterization of Induced Pluripotent Stem Cells.

PubMed

D'Antonio, Matteo; Woodruff, Grace; Nathanson, Jason L; D'Antonio-Chronowska, Agnieszka; Arias, Angelo; Matsui, Hiroko; Williams, Roy; Herrera, Cheryl; Reyna, Sol M; Yeo, Gene W; Goldstein, Lawrence S B; Panopoulos, Athanasia D; Frazer, Kelly A

2017-04-11

Reprogramming somatic cells to induced pluripotent stem cells (iPSCs) offers the possibility of studying the molecular mechanisms underlying human diseases in cell types difficult to extract from living patients, such as neurons and cardiomyocytes. To date, studies have been published that use small panels of iPSC-derived cell lines to study monogenic diseases. However, to study complex diseases, where the genetic variation underlying the disorder is unknown, a sizable number of patient-specific iPSC lines and controls need to be generated. Currently the methods for deriving and characterizing iPSCs are time consuming, expensive, and, in some cases, descriptive but not quantitative. Here we set out to develop a set of simple methods that reduce cost and increase throughput in the characterization of iPSC lines. Specifically, we outline methods for high-throughput quantification of surface markers, gene expression analysis of in vitro differentiation potential, and evaluation of karyotype with markedly reduced cost. Published by Elsevier Inc.

A comparison of classical histology to anatomy revealed by hard x-rays

NASA Astrophysics Data System (ADS)

Richter, Claus-Peter; Tan, Xiaodong; Young, Hunter; Stock, Stuart; Robinson, Alan; Byskosh, Orest; Zheng, Jing; Soriano, Carmen; Xiao, Xianghui; Whitlon, Donna

2016-10-01

Many diseases trigger morphological changes in affected tissue. Today, classical histology is still the "gold standard" used to study and describe those changes. Classical histology, however, is time consuming and requires chemical tissue manipulations that can result in significant tissue distortions. It is sometimes difficult to separate tissue-processing artifacts from changes caused by the disease process. We show that synchrotron X-ray phase-contrast micro-computed tomography (micro-CT) can be used to examine non-embedded, hydrated tissue at a resolution comparable to that obtained with classical histology. The data analysis from stacks of reconstructed micro-CT images is more flexible and faster than when using the classical, physically embedded sections that are by necessity fixed in a particular orientation. We show that in a three-dimensional (3D) structure with meticulous structural details such as the cochlea and the kidney, micro-CT is more flexible, faster and more convenient for morphological studies and disease diagnoses.

Designing tools for oil exploration using nuclear modeling

NASA Astrophysics Data System (ADS)

Mauborgne, Marie-Laure; Allioli, Françoise; Manclossi, Mauro; Nicoletti, Luisa; Stoller, Chris; Evans, Mike

2017-09-01

When designing nuclear tools for oil exploration, one of the first steps is typically nuclear modeling for concept evaluation and initial characterization. Having an accurate model, including the availability of accurate cross sections, is essential to reduce or avoid time consuming and costly design iterations. During tool response characterization, modeling is benchmarked with experimental data and then used to complement and to expand the database to make it more detailed and inclusive of more measurement environments which are difficult or impossible to reproduce in the laboratory. We present comparisons of our modeling results obtained using the ENDF/B-VI and ENDF/B-VII cross section data bases, focusing on the response to a few elements found in the tool, borehole and subsurface formation. For neutron-induced inelastic and capture gamma ray spectroscopy, major obstacles may be caused by missing or inaccurate cross sections for essential materials. We show examples of the benchmarking of modeling results against experimental data obtained during tool characterization and discuss observed discrepancies.

Multimodality 3D Superposition and Automated Whole Brain Tractography: Comprehensive Printing of the Functional Brain

PubMed Central

Brimley, Cameron J; Sublett, Jesna Mathew; Stefanowicz, Edward; Flora, Sarah; Mongelluzzo, Gino; Schirmer, Clemens M

2017-01-01

Whole brain tractography using diffusion tensor imaging (DTI) sequences can be used to map cerebral connectivity; however, this can be time-consuming due to the manual component of image manipulation required, calling for the need for a standardized, automated, and accurate fiber tracking protocol with automatic whole brain tractography (AWBT). Interpreting conventional two-dimensional (2D) images, such as computed tomography (CT) and magnetic resonance imaging (MRI), as an intraoperative three-dimensional (3D) environment is a difficult task with recognized inter-operator variability. Three-dimensional printing in neurosurgery has gained significant traction in the past decade, and as software, equipment, and practices become more refined, trainee education, surgical skills, research endeavors, innovation, patient education, and outcomes via valued care is projected to improve. We describe a novel multimodality 3D superposition (MMTS) technique, which fuses multiple imaging sequences alongside cerebral tractography into one patient-specific 3D printed model. Inferences on cost and improved outcomes fueled by encouraging patient engagement are explored. PMID:29201580

Pooling job physical exposure data from multiple independent studies in a consortium study of carpal tunnel syndrome

PubMed Central

Kapellusch, Jay M.; Garg, Arun; Bao, Stephen S.; Silverstein, Barbara A.; Burt, Susan E.; Dale, Ann Marie; Evanoff, Bradley A.; Gerr, Frederic E.; Harris-Adamson, Carisa; Hegmann, Kurt T.; Merlino, Linda A.; Rempel, David M.

2015-01-01

Pooling data from different epidemiological studies of musculoskeletal disorders (MSDs) is necessary to improve statistical power and to more precisely quantify exposure–response relationships for MSDs. The pooling process is difficult and time-consuming, and small methodological differences could lead to different exposure–response relationships. A subcommittee of a six-study research consortium studying carpal tunnel syndrome: (i) visited each study site, (ii) documented methods used to collect physical exposure data and (iii) determined compatibility of exposure variables across studies. Certain measures of force, frequency of exertion and duty cycle were collected by all studies and were largely compatible. A portion of studies had detailed data to investigate simultaneous combinations of force, frequency and duration of exertions. Limited compatibility was found for hand/wrist posture. Only two studies could calculate compatible Strain Index scores, but Threshold Limit Value for Hand Activity Level could be determined for all studies. Challenges of pooling data, resources required and recommendations for future researchers are discussed. PMID:23697792

Cost effective simulation-based multiobjective optimization in the performance of an internal combustion engine

NASA Astrophysics Data System (ADS)

Aittokoski, Timo; Miettinen, Kaisa

2008-07-01

Solving real-life engineering problems can be difficult because they often have multiple conflicting objectives, the objective functions involved are highly nonlinear and they contain multiple local minima. Furthermore, function values are often produced via a time-consuming simulation process. These facts suggest the need for an automated optimization tool that is efficient (in terms of number of objective function evaluations) and capable of solving global and multiobjective optimization problems. In this article, the requirements on a general simulation-based optimization system are discussed and such a system is applied to optimize the performance of a two-stroke combustion engine. In the example of a simulation-based optimization problem, the dimensions and shape of the exhaust pipe of a two-stroke engine are altered, and values of three conflicting objective functions are optimized. These values are derived from power output characteristics of the engine. The optimization approach involves interactive multiobjective optimization and provides a convenient tool to balance between conflicting objectives and to find good solutions.

Living in hope and desperate for a miracle: NICU nurses perceptions of parental anguish.

PubMed

Green, Janet

2015-04-01

The birth of an extremely premature baby is a tragedy, and it is only natural that the parents will rely on the spiritual and religious beliefs that guide the rest of their lives. At this difficult time, parents with strong religious beliefs will hope for divine intervention and pray for a miracle. This paper outlines the difficulties experienced by neonatal nurses when caring for an extremely premature baby whose parents hold on to hope and their belief in divine intervention and a miracle. Data were collected via a questionnaire to Australian neonatal nurses and semi-structured interviews with 24 neonatal nurses in NSW, Australia. A qualitative approach was used to analyse the data. The theme of "hoping for a miracle" was captured by two sub-themes "praying for a miracle" and "oscillating between hope and despair". For some families, the hope of divine intervention seemed all consuming, and the nurses were witness to the desperation and disappointment of families when a miracle was not forthcoming.

Cloud Environment Automation: from infrastructure deployment to application monitoring

NASA Astrophysics Data System (ADS)

Aiftimiei, C.; Costantini, A.; Bucchi, R.; Italiano, A.; Michelotto, D.; Panella, M.; Pergolesi, M.; Saletta, M.; Traldi, S.; Vistoli, C.; Zizzi, G.; Salomoni, D.

2017-10-01

The potential offered by the cloud paradigm is often limited by technical issues, rules and regulations. In particular, the activities related to the design and deployment of the Infrastructure as a Service (IaaS) cloud layer can be difficult to apply and time-consuming for the infrastructure maintainers. In this paper the research activity, carried out during the Open City Platform (OCP) research project [1], aimed at designing and developing an automatic tool for cloud-based IaaS deployment is presented. Open City Platform is an industrial research project funded by the Italian Ministry of University and Research (MIUR), started in 2014. It intends to research, develop and test new technological solutions open, interoperable and usable on-demand in the field of Cloud Computing, along with new sustainable organizational models that can be deployed for and adopted by the Public Administrations (PA). The presented work and the related outcomes are aimed at simplifying the deployment and maintenance of a complete IaaS cloud-based infrastructure.

Using UMLS to construct a generalized hierarchical concept-based dictionary of brain functions for information extraction from the fMRI literature.

PubMed

Hsiao, Mei-Yu; Chen, Chien-Chung; Chen, Jyh-Horng

2009-10-01

With a rapid progress in the field, a great many fMRI studies are published every year, to the extent that it is now becoming difficult for researchers to keep up with the literature, since reading papers is extremely time-consuming and labor-intensive. Thus, automatic information extraction has become an important issue. In this study, we used the Unified Medical Language System (UMLS) to construct a hierarchical concept-based dictionary of brain functions. To the best of our knowledge, this is the first generalized dictionary of this kind. We also developed an information extraction system for recognizing, mapping and classifying terms relevant to human brain study. The precision and recall of our system was on a par with that of human experts in term recognition, term mapping and term classification. Our approach presented in this paper presents an alternative to the more laborious, manual entry approach to information extraction.

Comparative investigation of Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD) in the determination of cotton fiber crystallinity.

PubMed

Liu, Yongliang; Thibodeaux, Devron; Gamble, Gary; Bauer, Philip; VanDerveer, Don

2012-08-01

Despite considerable efforts in developing curve-fitting protocols to evaluate the crystallinity index (CI) from X-ray diffraction (XRD) measurements, in its present state XRD can only provide a qualitative or semi-quantitative assessment of the amounts of crystalline or amorphous fraction in a sample. The greatest barrier to establishing quantitative XRD is the lack of appropriate cellulose standards, which are needed to calibrate the XRD measurements. In practice, samples with known CI are very difficult to prepare or determine. In a previous study, we reported the development of a simple algorithm for determining fiber crystallinity information from Fourier transform infrared (FT-IR) spectroscopy. Hence, in this study we not only compared the fiber crystallinity information between FT-IR and XRD measurements, by developing a simple XRD algorithm in place of a time-consuming and subjective curve-fitting process, but we also suggested a direct way of determining cotton cellulose CI by calibrating XRD with the use of CI(IR) as references.

Contact detection for nanomanipulation in a scanning electron microscope.

PubMed

Ru, Changhai; To, Steve

2012-07-01

Nanomanipulation systems require accurate knowledge of the end-effector position in all three spatial coordinates, XYZ, for reliable manipulation of nanostructures. Although the images acquired by a scanning electron microscope (SEM) provide high resolution XY information, the lack of depth information in the Z-direction makes 3D nanomanipulation time-consuming. Existing approaches for contact detection of end-effectors inside SEM typically utilize fragile touch sensors that are difficult to integrate into a nanomanipulation system. This paper presents a method for determining the contact between an end-effector and a target surface during nanomanipulation inside SEM, purely based on the processing of SEM images. A depth-from-focus method is used in the fast approach of the end-effector to the substrate, followed by fine contact detection. Experimental results demonstrate that the contact detection approach is capable of achieving an accuracy of 21.5 nm at 50,000× magnification while inducing little end-effector damage. Copyright © 2012 Elsevier B.V. All rights reserved.

BIM-Sim: Interactive Simulation of Broadband Imaging Using Mie Theory

NASA Astrophysics Data System (ADS)

Berisha, Sebastian; van Dijk, Thomas; Bhargava, Rohit; Carney, P. Scott; Mayerich, David

2017-02-01

Understanding the structure of a scattered electromagnetic (EM) field is critical to improving the imaging process. Mechanisms such as diffraction, scattering, and interference affect an image, limiting the resolution and potentially introducing artifacts. Simulation and visualization of scattered fields thus plays an important role in imaging science. However, the calculation of scattered fields is extremely time-consuming on desktop systems and computationally challenging on task-parallel systems such as supercomputers and cluster systems. In addition, EM fields are high-dimensional, making them difficult to visualize. In this paper, we present a framework for interactively computing and visualizing EM fields scattered by micro and nano-particles. Our software uses graphics hardware for evaluating the field both inside and outside of these particles. We then use Monte-Carlo sampling to reconstruct and visualize the three-dimensional structure of the field, spectral profiles at individual points, the structure of the field at the surface of the particle, and the resulting image produced by an optical system.

Software Defined Networking challenges and future direction: A case study of implementing SDN features on OpenStack private cloud

NASA Astrophysics Data System (ADS)

Shamugam, Veeramani; Murray, I.; Leong, J. A.; Sidhu, Amandeep S.

2016-03-01

Cloud computing provides services on demand instantly, such as access to network infrastructure consisting of computing hardware, operating systems, network storage, database and applications. Network usage and demands are growing at a very fast rate and to meet the current requirements, there is a need for automatic infrastructure scaling. Traditional networks are difficult to automate because of the distributed nature of their decision making process for switching or routing which are collocated on the same device. Managing complex environments using traditional networks is time-consuming and expensive, especially in the case of generating virtual machines, migration and network configuration. To mitigate the challenges, network operations require efficient, flexible, agile and scalable software defined networks (SDN). This paper discuss various issues in SDN and suggests how to mitigate the network management related issues. A private cloud prototype test bed was setup to implement the SDN on the OpenStack platform to test and evaluate the various network performances provided by the various configurations.

Use of Web-based library resources by medical students in community and ambulatory settings*

PubMed Central

Tannery, Nancy Hrinya; Foust, Jill E.; Gregg, Amy L.; Hartman, Linda M.; Kuller, Alice B.; Worona, Paul; Tulsky, Asher A.

2002-01-01

Purpose: The purpose was to evaluate the use of Web-based library resources by third-year medical students. Setting/Participants/Resources: Third-year medical students (147) in a twelve-week multidisciplinary primary care rotation in community and ambulatory settings. Methodology: Individual user surveys and log file analysis of Website were used. Results/Outcomes: Twenty resource topics were compiled into a Website to provide students with access to electronic library resources from any community-based clerkship location. These resource topics, covering subjects such as hypertension and back pain, linked to curriculum training problems, full-text journal articles, MEDLINE searches, electronic book chapters, and relevant Websites. More than half of the students (69%) accessed the Website on a daily or weekly basis. Over 80% thought the Website was a valuable addition to their clerkship. Discussion/Conclusion: Web-based information resources can provide curriculum support to students for whom access to the library is difficult and time consuming. PMID:12113515

PubSearch and PubFetch: a simple management system for semiautomated retrieval and annotation of biological information from the literature.

PubMed

Yoo, Danny; Xu, Iris; Berardini, Tanya Z; Rhee, Seung Yon; Narayanasamy, Vijay; Twigger, Simon

2006-03-01

For most systems in biology, a large body of literature exists that describes the complexity of the system based on experimental results. Manual review of this literature to extract targeted information into biological databases is difficult and time consuming. To address this problem, we developed PubSearch and PubFetch, which store literature, keyword, and gene information in a relational database, index the literature with keywords and gene names, and provide a Web user interface for annotating the genes from experimental data found in the associated literature. A set of protocols is provided in this unit for installing, populating, running, and using PubSearch and PubFetch. In addition, we provide support protocols for performing controlled vocabulary annotations. Intended users of PubSearch and PubFetch are database curators and biology researchers interested in tracking the literature and capturing information about genes of interest in a more effective way than with conventional spreadsheets and lab notebooks.

Cell-Free Protein Synthesis: Pros and Cons of Prokaryotic and Eukaryotic Systems

PubMed Central

Zemella, Anne; Thoring, Lena; Hoffmeister, Christian; Kubick, Stefan

2015-01-01

From its start as a small-scale in vitro system to study fundamental translation processes, cell-free protein synthesis quickly rose to become a potent platform for the high-yield production of proteins. In contrast to classical in vivo protein expression, cell-free systems do not need time-consuming cloning steps, and the open nature provides easy manipulation of reaction conditions as well as high-throughput potential. Especially for the synthesis of difficult to express proteins, such as toxic and transmembrane proteins, cell-free systems are of enormous interest. The modification of the genetic code to incorporate non-canonical amino acids into the target protein in particular provides enormous potential in biotechnology and pharmaceutical research and is in the focus of many cell-free projects. Many sophisticated cell-free systems for manifold applications have been established. This review describes the recent advances in cell-free protein synthesis and details the expanding applications in this field. PMID:26478227

An Autonomous System for Experimental Evolution of Microbial Cultures: Test Results Using Ultraviolet-C Radiation and Escherichia Coli.

NASA Technical Reports Server (NTRS)

Ouandji, Cynthia; Wang, Jonathan; Arismendi, Dillon; Lee, Alonzo; Blaich, Justin; Gentry, Diana

2017-01-01

At its core, the field of microbial experimental evolution seeks to elucidate the natural laws governing the history of microbial life by understanding its underlying driving mechanisms. However, observing evolution in nature is complex, as environmental conditions are difficult to control. Laboratory-based experiments for observing population evolution provide more control, but manually culturing and studying multiple generations of microorganisms can be time consuming, labor intensive, and prone to inconsistency. We have constructed a prototype, closed system device that automates the process of directed evolution experiments in microorganisms. It is compatible with any liquid microbial culture, including polycultures and field samples, provides flow control and adjustable agitation, continuously monitors optical density (OD), and can dynamically control environmental pressures such as ultraviolet-C (UV-C) radiation and temperature. Here, the results of the prototype are compared to iterative exposure and survival assays conducted using a traditional hood, UV-C lamp, and shutter system.

Classes of Split-Plot Response Surface Designs for Equivalent Estimation

NASA Technical Reports Server (NTRS)

Parker, Peter A.; Kowalski, Scott M.; Vining, G. Geoffrey

2006-01-01

When planning an experimental investigation, we are frequently faced with factors that are difficult or time consuming to manipulate, thereby making complete randomization impractical. A split-plot structure differentiates between the experimental units associated with these hard-to-change factors and others that are relatively easy-to-change and provides an efficient strategy that integrates the restrictions imposed by the experimental apparatus. Several industrial and scientific examples are presented to illustrate design considerations encountered in the restricted randomization context. In this paper, we propose classes of split-plot response designs that provide an intuitive and natural extension from the completely randomized context. For these designs, the ordinary least squares estimates of the model are equivalent to the generalized least squares estimates. This property provides best linear unbiased estimators and simplifies model estimation. The design conditions that allow for equivalent estimation are presented enabling design construction strategies to transform completely randomized Box-Behnken, equiradial, and small composite designs into a split-plot structure.

Multimodality 3D Superposition and Automated Whole Brain Tractography: Comprehensive Printing of the Functional Brain.

PubMed

Konakondla, Sanjay; Brimley, Cameron J; Sublett, Jesna Mathew; Stefanowicz, Edward; Flora, Sarah; Mongelluzzo, Gino; Schirmer, Clemens M

2017-09-29

Whole brain tractography using diffusion tensor imaging (DTI) sequences can be used to map cerebral connectivity; however, this can be time-consuming due to the manual component of image manipulation required, calling for the need for a standardized, automated, and accurate fiber tracking protocol with automatic whole brain tractography (AWBT). Interpreting conventional two-dimensional (2D) images, such as computed tomography (CT) and magnetic resonance imaging (MRI), as an intraoperative three-dimensional (3D) environment is a difficult task with recognized inter-operator variability. Three-dimensional printing in neurosurgery has gained significant traction in the past decade, and as software, equipment, and practices become more refined, trainee education, surgical skills, research endeavors, innovation, patient education, and outcomes via valued care is projected to improve. We describe a novel multimodality 3D superposition (MMTS) technique, which fuses multiple imaging sequences alongside cerebral tractography into one patient-specific 3D printed model. Inferences on cost and improved outcomes fueled by encouraging patient engagement are explored.

Maximized Inter-Class Weighted Mean for Fast and Accurate Mitosis Cells Detection in Breast Cancer Histopathology Images.

PubMed

Nateghi, Ramin; Danyali, Habibollah; Helfroush, Mohammad Sadegh

2017-08-14

Based on the Nottingham criteria, the number of mitosis cells in histopathological slides is an important factor in diagnosis and grading of breast cancer. For manual grading of mitosis cells, histopathology slides of the tissue are examined by pathologists at 40× magnification for each patient. This task is very difficult and time-consuming even for experts. In this paper, a fully automated method is presented for accurate detection of mitosis cells in histopathology slide images. First a method based on maximum-likelihood is employed for segmentation and extraction of mitosis cell. Then a novel Maximized Inter-class Weighted Mean (MIWM) method is proposed that aims at reducing the number of extracted non-mitosis candidates that results in reducing the false positive mitosis detection rate. Finally, segmented candidates are classified into mitosis and non-mitosis classes by using a support vector machine (SVM) classifier. Experimental results demonstrate a significant improvement in accuracy of mitosis cells detection in different grades of breast cancer histopathological images.

Underwater Calibration of Dome Port Pressure Housings

NASA Astrophysics Data System (ADS)

Nocerino, E.; Menna, F.; Fassi, F.; Remondino, F.

2016-03-01

Underwater photogrammetry using consumer grade photographic equipment can be feasible for different applications, e.g. archaeology, biology, industrial inspections, etc. The use of a camera underwater can be very different from its terrestrial use due to the optical phenomena involved. The presence of the water and camera pressure housing in front of the camera act as additional optical elements. Spherical dome ports are difficult to manufacture and consequently expensive but at the same time they are the most useful for underwater photogrammetry as they keep the main geometric characteristics of the lens unchanged. Nevertheless, the manufacturing and alignment of dome port pressure housing components can be the source of unexpected changes of radial and decentring distortion, source of systematic errors that can influence the final 3D measurements. The paper provides a brief introduction of underwater optical phenomena involved in underwater photography, then presents the main differences between flat and dome ports to finally discuss the effect of manufacturing on 3D measurements in two case studies.

Liver transplantation in the treatment of severe iatrogenic liver injuries

PubMed Central

Lauterio, Andrea; De Carlis, Riccardo; Di Sandro, Stefano; Ferla, Fabio; Buscemi, Vincenzo; De Carlis, Luciano

2017-01-01

The place of liver transplantation in the treatment of severe iatrogenic liver injuries has not yet been widely discussed in the literature. Bile duct injuries during cholecystectomy represent the leading cause of liver transplantation in this setting, while other indications after abdominal surgery are less common. Urgent liver transplantation for the treatment of severe iatrogenic liver injury may-represent a surgical challenge requiring technically difficult and time consuming procedures. A debate is ongoing on the need for centralization of complex surgery in tertiary referral centers. The early referral of patients with severe iatrogenic liver injuries to a tertiary center with experienced hepato-pancreato-biliary and transplant surgery has emerged as the best treatment of care. Despite widespread interest in the use of liver transplantation as a treatment option for severe iatrogenic injuries, reported experiences indicate few liver transplants are performed. This review analyzes the literature on liver transplantation after hepatic injury and discusses our own experience along with surgical advances and future prospects in this uncommon transplant setting. PMID:28932348

Fatigue Damage of Collagenous Tissues: Experiment, Modeling and Simulation Studies

PubMed Central

Martin, Caitlin; Sun, Wei

2017-01-01

Mechanical fatigue damage is a critical issue for soft tissues and tissue-derived materials, particularly for musculoskeletal and cardiovascular applications; yet, our understanding of the fatigue damage process is incomplete. Soft tissue fatigue experiments are often difficult and time-consuming to perform, which has hindered progress in this area. However, the recent development of soft-tissue fatigue-damage constitutive models has enabled simulation-based fatigue analyses of tissues under various conditions. Computational simulations facilitate highly controlled and quantitative analyses to study the distinct effects of various loading conditions and design features on tissue durability; thus, they are advantageous over complex fatigue experiments. Although significant work to calibrate the constitutive models from fatigue experiments and to validate predictability remains, further development in these areas will add to our knowledge of soft-tissue fatigue damage and will facilitate the design of durable treatments and devices. In this review, the experimental, modeling, and simulation efforts to study collagenous tissue fatigue damage are summarized and critically assessed. PMID:25955007

Attrition and erosion: assessment and diagnosis.

PubMed

Meyers, Ian

2012-04-01

The management of patients with extensively worn and badly broken down dentitions presents a difficult challenge in dental practice and restorative treatments are often complex, time consuming and costly to implement, so careful case selection and treatment planning is essential. Ultimately the success of any restorative intervention is very dependent on the stability of the oral environment and the status of the remaining tooth structure. Prior to the commencement of any restorative treatment an understanding of the importance of the disease process, the risk factors in the mouth, and the intrinsic and extrinsic factors which affect the oral balance is critical. While there is a growing range of materials and techniques available for cost effective and conservative management of these cases, failure to take a systematic approach to assessment and stabilization may result in early restorative failure, rapid recurrence of the problems and a repeat restoration cycle. Therefore successful management of these patients must include an appropriate mix of preventive and restorative strategies.

Pharmacokinetic properties and in silico ADME modeling in drug discovery.

PubMed

Honório, Kathia M; Moda, Tiago L; Andricopulo, Adriano D

2013-03-01

The discovery and development of a new drug are time-consuming, difficult and expensive. This complex process has evolved from classical methods into an integration of modern technologies and innovative strategies addressed to the design of new chemical entities to treat a variety of diseases. The development of new drug candidates is often limited by initial compounds lacking reasonable chemical and biological properties for further lead optimization. Huge libraries of compounds are frequently selected for biological screening using a variety of techniques and standard models to assess potency, affinity and selectivity. In this context, it is very important to study the pharmacokinetic profile of the compounds under investigation. Recent advances have been made in the collection of data and the development of models to assess and predict pharmacokinetic properties (ADME--absorption, distribution, metabolism and excretion) of bioactive compounds in the early stages of drug discovery projects. This paper provides a brief perspective on the evolution of in silico ADME tools, addressing challenges, limitations, and opportunities in medicinal chemistry.

Chromosome stickiness impairs meiosis and influences reproductive success in Panicum maximum (Poaceae) hybrid plants.

PubMed

Pessim, C; Pagliarini, M S; Silva, N; Jank, L

2015-04-28

Chromosome stickiness has been studied in several species of higher plants and is characterized by sticky clumps of chromatin resulting in sterility. Chromosome stickiness was recorded in Panicum maximum hybrid plants that were cultivated in the field. In the meiocytes affected, chromosomes clumped into amorphous masses that did not orient themselves on the equatorial plate, and anaphase I disjunction failed to occur. After a normal cytokinesis, the masses of chromatin were divided between both daughter cells. Metaphase and anaphase of the second division also did not occur, and after the second cytokinesis, polyads were formed. This abnormality arose spontaneously. Abnormalities that cause male sterility are an important tool for obtaining hybrid seeds in plant breeding. This is the first report of an abnormality affecting pollen viability in P. maximum. This finding can open a new opportunity in the breeding program of this species that is devoted to hybridization where manual cross-pollination is difficult and time consuming.

Software design and implementation of ship heave motion monitoring system based on MBD method

NASA Astrophysics Data System (ADS)

Yu, Yan; Li, Yuhan; Zhang, Chunwei; Kang, Won-Hee; Ou, Jinping

2015-03-01

Marine transportation plays a significant role in the modern transport sector due to its advantage of low cost, large capacity. It is being attached enormous importance to all over the world. Nowadays the related areas of product development have become an existing hot spot. DSP signal processors feature micro volume, low cost, high precision, fast processing speed, which has been widely used in all kinds of monitoring systems. But traditional DSP code development process is time-consuming, inefficiency, costly and difficult. MathWorks company proposed Model-based Design (MBD) to overcome these defects. By calling the target board modules in simulink library to compile and generate the corresponding code for the target processor. And then automatically call DSP integrated development environment CCS for algorithm validation on the target processor. This paper uses the MDB to design the algorithm for the ship heave motion monitoring system. It proves the effectiveness of the MBD run successfully on the processor.

Visualization of ultrasound induced cavitation bubbles using the synchrotron x-ray Analyzer Based Imaging technique.

PubMed

Izadifar, Zahra; Belev, George; Izadifar, Mohammad; Izadifar, Zohreh; Chapman, Dean

2014-12-07

Observing cavitation bubbles deep within tissue is very difficult. The development of a method for probing cavitation, irrespective of its location in tissues, would improve the efficiency and application of ultrasound in the clinic. A synchrotron x-ray imaging technique, which is capable of detecting cavitation bubbles induced in water by a sonochemistry system, is reported here; this could possibly be extended to the study of therapeutic ultrasound in tissues. The two different x-ray imaging techniques of Analyzer Based Imaging (ABI) and phase contrast imaging (PCI) were examined in order to detect ultrasound induced cavitation bubbles. Cavitation was not observed by PCI, however it was detectable with ABI. Acoustic cavitation was imaged at six different acoustic power levels and six different locations through the acoustic beam in water at a fixed power level. The results indicate the potential utility of this technique for cavitation studies in tissues, but it is time consuming. This may be improved by optimizing the imaging method.

High-resolution X-ray crystal structure of bovine H-protein using the high-pressure cryocooling method.

PubMed

Higashiura, Akifumi; Ohta, Kazunori; Masaki, Mika; Sato, Masaru; Inaka, Koji; Tanaka, Hiroaki; Nakagawa, Atsushi

2013-11-01

Recently, many technical improvements in macromolecular X-ray crystallography have increased the number of structures deposited in the Protein Data Bank and improved the resolution limit of protein structures. Almost all high-resolution structures have been determined using a synchrotron radiation source in conjunction with cryocooling techniques, which are required in order to minimize radiation damage. However, optimization of cryoprotectant conditions is a time-consuming and difficult step. To overcome this problem, the high-pressure cryocooling method was developed (Kim et al., 2005) and successfully applied to many protein-structure analyses. In this report, using the high-pressure cryocooling method, the X-ray crystal structure of bovine H-protein was determined at 0.86 Å resolution. Structural comparisons between high- and ambient-pressure cryocooled crystals at ultra-high resolution illustrate the versatility of this technique. This is the first ultra-high-resolution X-ray structure obtained using the high-pressure cryocooling method.

Application of maximum likelihood methods to laser Thomson scattering measurements of low density plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Washeleski, Robert L.; Meyer, Edmond J. IV; King, Lyon B.

2013-10-15

Laser Thomson scattering (LTS) is an established plasma diagnostic technique that has seen recent application to low density plasmas. It is difficult to perform LTS measurements when the scattered signal is weak as a result of low electron number density, poor optical access to the plasma, or both. Photon counting methods are often implemented in order to perform measurements in these low signal conditions. However, photon counting measurements performed with photo-multiplier tubes are time consuming and multi-photon arrivals are incorrectly recorded. In order to overcome these shortcomings a new data analysis method based on maximum likelihood estimation was developed. Themore » key feature of this new data processing method is the inclusion of non-arrival events in determining the scattered Thomson signal. Maximum likelihood estimation and its application to Thomson scattering at low signal levels is presented and application of the new processing method to LTS measurements performed in the plume of a 2-kW Hall-effect thruster is discussed.« less

Application of maximum likelihood methods to laser Thomson scattering measurements of low density plasmas.

PubMed

Washeleski, Robert L; Meyer, Edmond J; King, Lyon B

2013-10-01

Laser Thomson scattering (LTS) is an established plasma diagnostic technique that has seen recent application to low density plasmas. It is difficult to perform LTS measurements when the scattered signal is weak as a result of low electron number density, poor optical access to the plasma, or both. Photon counting methods are often implemented in order to perform measurements in these low signal conditions. However, photon counting measurements performed with photo-multiplier tubes are time consuming and multi-photon arrivals are incorrectly recorded. In order to overcome these shortcomings a new data analysis method based on maximum likelihood estimation was developed. The key feature of this new data processing method is the inclusion of non-arrival events in determining the scattered Thomson signal. Maximum likelihood estimation and its application to Thomson scattering at low signal levels is presented and application of the new processing method to LTS measurements performed in the plume of a 2-kW Hall-effect thruster is discussed.