The Use of the Digital Smile Design Concept as an Auxiliary Tool in Aesthetic Rehabilitation: A Case Report.

PubMed

Zanardi, Piero Rocha; Laia Rocha Zanardi, Raquel; Chaib Stegun, Roberto; Sesma, Newton; Costa, Bru-No; Cruz Laganá, Dalva

2016-01-01

The digital smile design is a practical diagnosis method that can assist the clinician to visualize and measure dentogingival discrepancies. This clinical report aims to present the associated steps, from the diagnosis of the alterations diagnosis through to the final aesthetic result. A 37-years-old female patient presented as her main complaint the tooth form and colour discrepancies. Applying the digital smile design principle, the necessary measures for a harmonic smile correction could be accurately determined. The initial diagnosis led to a wax up of the master cast that was duplicated in acrylic resin directly in the mouth. This temporary restoration guided the periodontal surgery and the final pressed ceramic crown restoration. We conclude that the digital smile design concept seems to be a useful tool to achieve a satisfactory aesthetic result.

Experiences on developing digital down conversion algorithms using Xilinx system generator

NASA Astrophysics Data System (ADS)

Xu, Chengfa; Yuan, Yuan; Zhao, Lizhi

2013-07-01

The Digital Down Conversion (DDC) algorithm is a classical signal processing method which is widely used in radar and communication systems. In this paper, the DDC function is implemented by Xilinx System Generator tool on FPGA. System Generator is an FPGA design tool provided by Xilinx Inc and MathWorks Inc. It is very convenient for programmers to manipulate the design and debug the function, especially for the complex algorithm. Through the developing process of DDC function based on System Generator, the results show that System Generator is a very fast and efficient tool for FPGA design.

Using Modern Design Tools for Digital Avionics Development

NASA Technical Reports Server (NTRS)

Hyde, David W.; Lakin, David R., II; Asquith, Thomas E.

2000-01-01

Using Modem Design Tools for Digital Avionics Development Shrinking development time and increased complexity of new avionics forces the designer to use modem tools and methods during hardware development. Engineers at the Marshall Space Flight Center have successfully upgraded their design flow and used it to develop a Mongoose V based radiation tolerant processor board for the International Space Station's Water Recovery System. The design flow, based on hardware description languages, simulation, synthesis, hardware models, and full functional software model libraries, allowed designers to fully simulate the processor board from reset, through initialization before any boards were built. The fidelity of a digital simulation is limited to the accuracy of the models used and how realistically the designer drives the circuit's inputs during simulation. By using the actual silicon during simulation, device modeling errors are reduced. Numerous design flaws were discovered early in the design phase when they could be easily fixed. The use of hardware models and actual MIPS software loaded into full functional memory models also provided checkout of the software development environment. This paper will describe the design flow used to develop the processor board and give examples of errors that were found using the tools. An overview of the processor board firmware will also be covered.

A Digital Library for Education: The PEN-DOR Project.

ERIC Educational Resources Information Center

Fullerton, Karen; Greenberg, Jane; McClure, Maureen; Rasmussen, Edie; Stewart, Darin

1999-01-01

Describes Pen-DOR (Pennsylvania Education Network Digital Object Repository), a digital library designed to provide K-12 educators with access to multimedia resources and tools to create new lesson plans and modify existing ones via the World Wide Web. Discusses design problems of a distributed, object-oriented database architecture and describes…

Assessing the Educational Values of Digital Games

ERIC Educational Resources Information Center

Hong, J-C.; Cheng, C-L.; Hwang, M-Y.; Lee, C-K.; Chang, H-Y.

2009-01-01

In recent years, digital games have assumed an important place in the lives of children and adolescents. Effective content design is crucial to the success of digital game-based learning. Therefore, the tool for assessing the effectiveness of game design is accordingly very important for parents and teachers, so that they may encourage or…

Research and Policy: Can Online Learning Communities Foster Professional Development?

ERIC Educational Resources Information Center

Beach, Richard

2012-01-01

This column posits enhancing professional development through uses of digital tools to create professional learning communities (PLCs) designed to support collective inquiry and action research leading to schoolwide improvement. These digital tools include a social networking/discussion forum for teacher collaboration; teachers' individual…

Don't Forget the Doctor: Gastroenterologists' Preferences on the Development of mHealth Tools for Inflammatory Bowel Disease.

PubMed

van Mierlo, Trevor; Fournier, Rachel; Fedorak, Richard

2015-01-21

Inflammatory bowel disease (IBD) encompasses a number of disorders of the gastrointestinal tract. Treatment for IBD is lifelong and complex, and the majority of IBD patients seek information on the Internet. However, research has found existing digital resources to be of questionable quality and that patients find content lacking. Gastroenterologists are frontline sources of information for North American IBD patients, but their opinions and preferences for digital content, design, and utility have not been investigated. The purpose of this study is to systematically explore gastroenterologists' perceptions of, and design preferences for, mHealth tools. Our goal was to critically assess these issues and elicit expert feedback by seeking consensus with Canadian gastroenterologists. Using a qualitative approach, a closed meeting with 7 gastroenterologists was audio recorded and field notes taken. To synthesize results, an anonymous questionnaire was collected at the end of the session. Participant-led discussion themes included methodological approaches to non-adherence, concordance, patient-centricity, and attributes of digital tools that would be actively supported and promoted. Survey results indicated that 4 of the 7 gastroenterologists had experienced patients bringing digital resources to a visit, but 5 found digital patient resources to be inaccurate or irrelevant. All participants agreed that digital tools were of increasing importance and could be leveraged to aid in consultations and save time. When asked to assess digital attributes that they would be confident to refer patients to, all seven indicated that the inclusion of evidence-based facts were of greatest importance. Patient peer-support networks were deemed an asset but only if closely monitored by experts. When asked about interventions, nearly all (6/7) preferred tools that addressed a mix of compliance and concordance, and only one supported the development of tools that focused on compliance. Participants confirmed that they would actively refer patients and other physicians to digital resources. However, while a number of digital IBD tools exist, gastroenterologists would be reluctant to endorse them. Gastroenterologists appear eager to use digital resources that they believe benefit the physician-patient relationship, but despite the trend of patient-centric tools that focus on concordance (shared decision making and enlightened communication between patients and their health care providers), they would prefer digital tools that highlight compliance (patient following orders). This concordance gap highlights an issue of disparity in digital health: patients may not use tools that physicians promote, and physicians may not endorse tools that patients will use. Further research investigating the concordance gap, and tensions between physician preferences and patient needs, is required.

Development and Evaluation of a Case-Based Digital Learning Tool about Children's Mathematical Thinking for Elementary School Teachers (L-TEST)

ERIC Educational Resources Information Center

Olkun, Sinan; Altun, Arif; Deryakulu, Deniz

2009-01-01

It is important for teachers of mathematics to know how pupils react to certain mathematical situations and what these reactions imply, in order to design more effective instructional environments based on their learning needs. This study reports the development processes of a digital learning tool (Learning Tool for Elementary School Teachers…

Evaluating Digital Authoring Tools

ERIC Educational Resources Information Center

Wilde, Russ

2004-01-01

As the quality of authoring software increases, online course developers become less reliant on proprietary learning management systems, and develop skills in the design of original, in-house materials and the delivery platforms for them. This report examines the capabilities of digital authoring software tools for the development of learning…

Teachers' Perspectives on Digital Tools for Pedagogic Planning and Design

ERIC Educational Resources Information Center

Masterman, Elizabeth; Manton, Marion

2011-01-01

The authors introduce the concept of design support tools and situate them in the pedagogic context of professional development for technology-enhanced learning (TEL) and the research field of learning design. Through focusing on the development and evaluation of one such tool, Phoebe, they discuss their value to lecturers in post-compulsory…

May We Help You Find Something? AskNSDL!

ERIC Educational Resources Information Center

Silverstein, Joanne

2003-01-01

Explains the digital reference service AskNSDL that was developed for the National Science Digital Library (NSDL). Discusses tools used to design the service, including QABuilder software; QuIP (Question Interchange Profile) metadata format standard; GEM (Gateway to Educational Materials) cataloging tool; and the AskERIC question and answer…

Don’t Forget the Doctor: Gastroenterologists’ Preferences on the Development of mHealth Tools for Inflammatory Bowel Disease

PubMed Central

2015-01-01

Background Inflammatory bowel disease (IBD) encompasses a number of disorders of the gastrointestinal tract. Treatment for IBD is lifelong and complex, and the majority of IBD patients seek information on the Internet. However, research has found existing digital resources to be of questionable quality and that patients find content lacking. Gastroenterologists are frontline sources of information for North American IBD patients, but their opinions and preferences for digital content, design, and utility have not been investigated. The purpose of this study is to systematically explore gastroenterologists’ perceptions of, and design preferences for, mHealth tools. Objective Our goal was to critically assess these issues and elicit expert feedback by seeking consensus with Canadian gastroenterologists. Methods Using a qualitative approach, a closed meeting with 7 gastroenterologists was audio recorded and field notes taken. To synthesize results, an anonymous questionnaire was collected at the end of the session. Participant-led discussion themes included methodological approaches to non-adherence, concordance, patient-centricity, and attributes of digital tools that would be actively supported and promoted. Results Survey results indicated that 4 of the 7 gastroenterologists had experienced patients bringing digital resources to a visit, but 5 found digital patient resources to be inaccurate or irrelevant. All participants agreed that digital tools were of increasing importance and could be leveraged to aid in consultations and save time. When asked to assess digital attributes that they would be confident to refer patients to, all seven indicated that the inclusion of evidence-based facts were of greatest importance. Patient peer-support networks were deemed an asset but only if closely monitored by experts. When asked about interventions, nearly all (6/7) preferred tools that addressed a mix of compliance and concordance, and only one supported the development of tools that focused on compliance. Participants confirmed that they would actively refer patients and other physicians to digital resources. However, while a number of digital IBD tools exist, gastroenterologists would be reluctant to endorse them. Conclusions Gastroenterologists appear eager to use digital resources that they believe benefit the physician-patient relationship, but despite the trend of patient-centric tools that focus on concordance (shared decision making and enlightened communication between patients and their health care providers), they would prefer digital tools that highlight compliance (patient following orders). This concordance gap highlights an issue of disparity in digital health: patients may not use tools that physicians promote, and physicians may not endorse tools that patients will use. Further research investigating the concordance gap, and tensions between physician preferences and patient needs, is required. PMID:25608628

A dual-mode generalized likelihood ratio approach to self-reorganizing digital flight control system design

NASA Technical Reports Server (NTRS)

Bueno, R.; Chow, E.; Gershwin, S. B.; Willsky, A. S.

1975-01-01

The research is reported on the problems of failure detection and reliable system design for digital aircraft control systems. Failure modes, cross detection probability, wrong time detection, application of performance tools, and the GLR computer package are discussed.

Designing and Managing Your Digital Library.

ERIC Educational Resources Information Center

Guenther, Kim

2000-01-01

Discusses digital libraries and Web site design issues. Highlights include accessibility issues, including standards, markup languages like HTML and XML, and metadata; building virtual communities; the use of Web portals for customized delivery of information; quality assurance tools, including data mining; and determining user needs, including…

A Study of the Effects of Digital Learning on Learning Motivation and Learning Outcome

ERIC Educational Resources Information Center

Lin, Ming-Hung; Chen, Huang-Cheng; Liu, Kuang-Sheng

2017-01-01

In the modern society when intelligent mobile devices become popular, the Internet breaks through the restrictions on time and space and becomes a ubiquitous learning tool. Designing teaching activity for digital learning and flexibly applying technology tools are the key issues for current information technology integrated education. In this…

The Importance of Theoretical Frameworks and Mathematical Constructs in Designing Digital Tools

ERIC Educational Resources Information Center

Trinter, Christine

2016-01-01

The increase in availability of educational technologies over the past few decades has not only led to new practice in teaching mathematics but also to new perspectives in research, methodologies, and theoretical frameworks within mathematics education. Hence, the amalgamation of theoretical and pragmatic considerations in digital tool design…

Educational Impact of Digital Visualization Tools on Digital Character Production Computer Science Courses

ERIC Educational Resources Information Center

van Langeveld, Mark Christensen

2009-01-01

Digital character production courses have traditionally been taught in art departments. The digital character production course at the University of Utah is centered, drawing uniformly from art and engineering disciplines. Its design has evolved to include a synergy of computer science, functional art and human anatomy. It gives students an…

Digital-flight-control-system software written in automated-engineering-design language: A user's guide of verification and validation tools

NASA Technical Reports Server (NTRS)

Saito, Jim

1987-01-01

The user guide of verification and validation (V&V) tools for the Automated Engineering Design (AED) language is specifically written to update the information found in several documents pertaining to the automated verification of flight software tools. The intent is to provide, in one document, all the information necessary to adequately prepare a run to use the AED V&V tools. No attempt is made to discuss the FORTRAN V&V tools since they were not updated and are not currently active. Additionally, the current descriptions of the AED V&V tools are contained and provides information to augment the NASA TM 84276. The AED V&V tools are accessed from the digital flight control systems verification laboratory (DFCSVL) via a PDP-11/60 digital computer. The AED V&V tool interface handlers on the PDP-11/60 generate a Univac run stream which is transmitted to the Univac via a Remote Job Entry (RJE) link. Job execution takes place on the Univac 1100 and the job output is transmitted back to the DFCSVL and stored as a PDP-11/60 printfile.

Digital Signal Processing and Control for the Study of Gene Networks

NASA Astrophysics Data System (ADS)

Shin, Yong-Jun

2016-04-01

Thanks to the digital revolution, digital signal processing and control has been widely used in many areas of science and engineering today. It provides practical and powerful tools to model, simulate, analyze, design, measure, and control complex and dynamic systems such as robots and aircrafts. Gene networks are also complex dynamic systems which can be studied via digital signal processing and control. Unlike conventional computational methods, this approach is capable of not only modeling but also controlling gene networks since the experimental environment is mostly digital today. The overall aim of this article is to introduce digital signal processing and control as a useful tool for the study of gene networks.

Digital Signal Processing and Control for the Study of Gene Networks.

PubMed

Shin, Yong-Jun

2016-04-22

Thanks to the digital revolution, digital signal processing and control has been widely used in many areas of science and engineering today. It provides practical and powerful tools to model, simulate, analyze, design, measure, and control complex and dynamic systems such as robots and aircrafts. Gene networks are also complex dynamic systems which can be studied via digital signal processing and control. Unlike conventional computational methods, this approach is capable of not only modeling but also controlling gene networks since the experimental environment is mostly digital today. The overall aim of this article is to introduce digital signal processing and control as a useful tool for the study of gene networks.

Digital Signal Processing and Control for the Study of Gene Networks

PubMed Central

Shin, Yong-Jun

2016-01-01

Thanks to the digital revolution, digital signal processing and control has been widely used in many areas of science and engineering today. It provides practical and powerful tools to model, simulate, analyze, design, measure, and control complex and dynamic systems such as robots and aircrafts. Gene networks are also complex dynamic systems which can be studied via digital signal processing and control. Unlike conventional computational methods, this approach is capable of not only modeling but also controlling gene networks since the experimental environment is mostly digital today. The overall aim of this article is to introduce digital signal processing and control as a useful tool for the study of gene networks. PMID:27102828

Assessing the Impact of CAAD Design Tool on Architectural Design Education

ERIC Educational Resources Information Center

Al-Matarneh, Rana; Fethi, Ihsan

2017-01-01

The current concept of architectural design education in most schools of architecture in Jordan is a blend between manual and digital approaches. However, the disconnection between these two methods has resulted in the students' failure to transfer skills learnt through traditional methods to the digital method of CAAD. The objective of this study…

An Investigation of Pre-Service Primary School Teachers' Attitudes towards Digital Technology and Digital Citizenship Levels in Terms of Some Variables

ERIC Educational Resources Information Center

Çiftci, Serdar; Aladag, Soner

2018-01-01

This study aims at investigating the relationship between pre-service primary school teachers' attitudes towards digital technology and digital citizenship scale levels. The research was designed in descriptive survey model. The data collection tools were "Attitude Scale for Digital Technology" (ASDT) developed by Cabi (2016) and…

Parameterizable Library Components for SAW Devices

NASA Technical Reports Server (NTRS)

Wilson, William C.; Atkinson, Gary M.

2006-01-01

To facilitate quick fabrication of Surface Acoustic Wave (SAW) sensors we have found it necessary to develop a library of parameterizable components. This library is the first module in our strategy towards a design tool that is integrated into existing Electronic Design Automation (EDA) tools. This library is similar to the standard cell libraries found in digital design packages. The library cells allow the user to input the design parameters which automatically generate a detailed layout of the SAW component. This paper presents the results of our development of parameterizable cells for an InterDigitated Transducer (IDT), reflector, SAW delay line, and both one and two port resonators.

Microprocessor Based Temperature Control of Liquid Delivery with Flow Disturbances.

ERIC Educational Resources Information Center

Kaya, Azmi

1982-01-01

Discusses analytical design and experimental verification of a PID control value for a temperature controlled liquid delivery system, demonstrating that the analytical design techniques can be experimentally verified by using digital controls as a tool. Digital control instrumentation and implementation are also demonstrated and documented for…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Punnoose, Ratish J.; Armstrong, Robert C.; Wong, Matthew H.

Formal methods have come into wide use because of their effectiveness in verifying "safety and security" requirements of digital systems; a set of requirements for which testing is mostly ineffective. Formal methods are routinely used in the design and verification of high-consequence digital systems in industry. This report outlines our work in assessing the capabilities of commercial and open source formal tools and the ways in which they can be leveraged in digital design workflows.

A Digital Storytelling Study Project on Mathematics Course with Preschool Pre-Service Teachers

ERIC Educational Resources Information Center

Inan, Cemil

2015-01-01

Digital storytelling technique is based on a presentation of course content in a story form using multimedia tools. In this study, digital stories were designed for mathematics instruction with preschool pre-service teachers. At the end of the six-week study, preschool students viewed the digital stories created. The study aimed to determine the…

Applied Digital Logic Exercises Using FPGAs

NASA Astrophysics Data System (ADS)

Wick, Kurt

2017-09-01

Applied Digital Logic Exercises Using FPGAs is appropriate for anyone interested in digital logic who needs to learn how to implement it through detailed exercises with state-of-the-art digital design tools and components. The book exposes readers to combinational and sequential digital logic concepts and implements them with hands-on exercises using the Verilog Hardware Description Language (HDL) and a Field Programmable Gate Arrays (FGPA) teaching board.

How Digital Scaffolds in Games Direct Problem-Solving Behaviors

ERIC Educational Resources Information Center

Sun, Chuen-Tsai; Wang, Dai-Yi; Chan, Hui-Ling

2011-01-01

Digital systems offer computational power and instant feedback. Game designers are using these features to create scaffolding tools to reduce player frustration. However, researchers are finding some unexpected effects of scaffolding on strategy development and problem-solving behaviors. We used a digital Sudoku game named "Professor Sudoku" to…

Cognitive Enhancement Using ICT and Its Ethical Implications.

PubMed

Doukakis, Spyros; Stamatellos, Giannis; Glinou, Nektaria

2017-01-01

The utilization of digital tools aiming at the cognitive enhancement of students and adults, so that they can achieve better performance and professional or academic success, has increased in recent years. This paper focuses on ICT tools such as computer games, programming languages and educational software as means for cognitive enhancement and attempts to highlight their contributions. Issues of design and the limitations of digital tools are discussed. In the final section, the ethical implications of using educational ICT tools for cognitive enhancement from a virtue ethics perspective are presented.

Computer-Aided Design Package for Designers of Digital Optical Computers

DTIC Science & Technology

1991-02-01

circuit depth and in circuit breadth. It appears, from initial studies by PhD students Gupta and Majidi using the newly modified tools, that a few irregular...Gupta, which is based on an earlier tool developed by Majidi . The tool allows logic gates to have fan-ins and fan-outs that vary, and allows circuits

Next-Generation NATO Reference Mobility Model (NG-NRMM)

DTIC Science & Technology

2016-05-11

facilitate comparisons between vehicle design candidates and to assess the mobility of existing vehicles under specific scenarios. Although NRMM has...of different deployed platforms in different areas of operation and routes  Improved flexibility as a design and procurement support tool through...Element Method DEM Digital Elevation Model DIL Driver in the Loop DP Drawbar Pull Force DOE Design of Experiments DTED Digital Terrain Elevation Data

Analog/digital pH meter system I.C.

NASA Technical Reports Server (NTRS)

Vincent, Paul; Park, Jea

1992-01-01

The project utilizes design automation software tools to design, simulate, and fabricate a pH meter integrated circuit (IC) system including a successive approximation type seven-bit analog to digital converter circuits using a 1.25 micron N-Well CMOS MOSIS process. The input voltage ranges from 0.5 to 1.0 V derived from a special type pH sensor, and the output is a three-digit decimal number display of pH with one decimal point.

Supporting Teachers' Reflection and Learning through Structured Digital Teaching Portfolios

ERIC Educational Resources Information Center

Sung, Y. -T.; Chang, K. -E.; Yu, W. -C.; Chang, T. -H.

2009-01-01

Digital teaching portfolios have been proposed as an effective tool for teacher learning and professional development, but there is a lack of empirical evidence supporting their effectiveness. This study proposed the design of a structured digital portfolio equipped with multiple aids (e.g. self-assessment, peer assessment, discussion and journal…

A University Library Creates a Digital Repository for Documenting and Disseminating Community Engagement

ERIC Educational Resources Information Center

Miller, William A.; Billings, Marilyn

2012-01-01

Digital repositories are new tools for documenting the accumulated scholarly work produced at academic institutions and disseminating that material broadly via the internet. Digital repositories support all file types and can be adapted to meet the custom design specifications of individual institutions. A section for community engagement…

Digital Portfolios: Documenting Student Growth

ERIC Educational Resources Information Center

Cramer, Matthew

2009-01-01

The digital portfolio process at Camino Nuevo High School (CNHS) offers an essential 21st century skill to students. All students are trained in basic web design to build and maintain their digital portfolios. These skills equip them with tools they will likely use in their future endeavors in college and the professional world. Teachers at CNHS…

Designing Computer-Based Learning Contents: Influence of Digital Zoom on Attention

ERIC Educational Resources Information Center

Glaser, Manuela; Lengyel, Dominik; Toulouse, Catherine; Schwan, Stephan

2017-01-01

In the present study, we investigated the role of digital zoom as a tool for directing attention while looking at visual learning material. In particular, we analyzed whether minimal digital zoom functions similarly to a rhetorical device by cueing mental zooming of attention accordingly. Participants were presented either static film clips, film…

Distributed digital music archives and libraries

NASA Astrophysics Data System (ADS)

Fujinaga, Ichiro

2005-09-01

The main goal of this research program is to develop and evaluate practices, frameworks, and tools for the design and construction of worldwide distributed digital music archives and libraries. Over the last few millennia, humans have amassed an enormous amount of musical information that is scattered around the world. It is becoming abundantly clear that the optimal path for acquisition is to distribute the task of digitizing the wealth of historical and cultural heritage material that exists in analogue formats, which may include books and manuscripts related to music, music scores, photographs, videos, audio tapes, and phonograph records. In order to achieve this goal, libraries, museums, and archives throughout the world, large or small, need well-researched policies, proper guidance, and efficient tools to digitize their collections and to make them available economically. The research conducted within the program addresses unique and imminent challenges posed by the digitization and dissemination of music media. The are four major research projects in progress: development and evaluation of digitization methods for preservation of analogue recordings; optical music recognition using microfilms; design of workflow management system with automatic metadata extraction; and formulation of interlibrary communication strategies.

Experiences in Digital Circuit Design Courses: A Self-Study Platform for Learning Support

ERIC Educational Resources Information Center

Bañeres, David; Clarisó, Robert; Jorba, Josep; Serra, Montse

2014-01-01

The synthesis of digital circuits is a basic skill in all the bachelor programmes around the ICT area of knowledge, such as Computer Science, Telecommunication Engineering or Electrical Engineering. An important hindrance in the learning process of this skill is that the existing educational tools for the design of circuits do not allow the…

Digital technology and clinical decision making in depression treatment: Current findings and future opportunities.

PubMed

Hallgren, Kevin A; Bauer, Amy M; Atkins, David C

2017-06-01

Clinical decision making encompasses a broad set of processes that contribute to the effectiveness of depression treatments. There is emerging interest in using digital technologies to support effective and efficient clinical decision making. In this paper, we provide "snapshots" of research and current directions on ways that digital technologies can support clinical decision making in depression treatment. Practical facets of clinical decision making are reviewed, then research, design, and implementation opportunities where technology can potentially enhance clinical decision making are outlined. Discussions of these opportunities are organized around three established movements designed to enhance clinical decision making for depression treatment, including measurement-based care, integrated care, and personalized medicine. Research, design, and implementation efforts may support clinical decision making for depression by (1) improving tools to incorporate depression symptom data into existing electronic health record systems, (2) enhancing measurement of treatment fidelity and treatment processes, (3) harnessing smartphone and biosensor data to inform clinical decision making, (4) enhancing tools that support communication and care coordination between patients and providers and within provider teams, and (5) leveraging treatment and outcome data from electronic health record systems to support personalized depression treatment. The current climate of rapid changes in both healthcare and digital technologies facilitates an urgent need for research, design, and implementation of digital technologies that explicitly support clinical decision making. Ensuring that such tools are efficient, effective, and usable in frontline treatment settings will be essential for their success and will require engagement of stakeholders from multiple domains. © 2017 Wiley Periodicals, Inc.

Integrated performance and reliability specification for digital avionics systems

NASA Technical Reports Server (NTRS)

Brehm, Eric W.; Goettge, Robert T.

1995-01-01

This paper describes an automated tool for performance and reliability assessment of digital avionics systems, called the Automated Design Tool Set (ADTS). ADTS is based on an integrated approach to design assessment that unifies traditional performance and reliability views of system designs, and that addresses interdependencies between performance and reliability behavior via exchange of parameters and result between mathematical models of each type. A multi-layer tool set architecture has been developed for ADTS that separates the concerns of system specification, model generation, and model solution. Performance and reliability models are generated automatically as a function of candidate system designs, and model results are expressed within the system specification. The layered approach helps deal with the inherent complexity of the design assessment process, and preserves long-term flexibility to accommodate a wide range of models and solution techniques within the tool set structure. ADTS research and development to date has focused on development of a language for specification of system designs as a basis for performance and reliability evaluation. A model generation and solution framework has also been developed for ADTS, that will ultimately encompass an integrated set of analytic and simulated based techniques for performance, reliability, and combined design assessment.

Designers workbench: toward real-time immersive modeling

NASA Astrophysics Data System (ADS)

Kuester, Falko; Duchaineau, Mark A.; Hamann, Bernd; Joy, Kenneth I.; Ma, Kwan-Liu

2000-05-01

This paper introduces the Designers Workbench, a semi- immersive virtual environment for two-handed modeling, sculpting and analysis tasks. The paper outlines the fundamental tools, design metaphors and hardware components required for an intuitive real-time modeling system. As companies focus on streamlining productivity to cope with global competition, the migration to computer-aided design (CAD), computer-aided manufacturing, and computer-aided engineering systems has established a new backbone of modern industrial product development. However, traditionally a product design frequently originates form a clay model that, after digitization, forms the basis for the numerical description of CAD primitives. The Designers Workbench aims at closing this technology or 'digital gap' experienced by design and CAD engineers by transforming the classical design paradigm into its fully integrate digital and virtual analog allowing collaborative development in a semi- immersive virtual environment. This project emphasizes two key components form the classical product design cycle: freeform modeling and analysis. In the freedom modeling stage, content creation in the form of two-handed sculpting of arbitrary objects using polygonal, volumetric or mathematically defined primitives is emphasized, whereas the analysis component provides the tools required for pre- and post-processing steps for finite element analysis tasks applied to the created models.

Design methodology: edgeless 3D ASICs with complex in-pixel processing for pixel detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fahim Farah, Fahim Farah; Deptuch, Grzegorz W.; Hoff, James R.

The design methodology for the development of 3D integrated edgeless pixel detectors with in-pixel processing using Electronic Design Automation (EDA) tools is presented. A large area 3 tier 3D detector with one sensor layer and two ASIC layers containing one analog and one digital tier, is built for x-ray photon time of arrival measurement and imaging. A full custom analog pixel is 65μm x 65μm. It is connected to a sensor pixel of the same size on one side, and on the other side it has approximately 40 connections to the digital pixel. A 32 x 32 edgeless array withoutmore » any peripheral functional blocks constitutes a sub-chip. The sub-chip is an indivisible unit, which is further arranged in a 6 x 6 array to create the entire 1.248cm x 1.248cm ASIC. Each chip has 720 bump-bond I/O connections, on the back of the digital tier to the ceramic PCB. All the analog tier power and biasing is conveyed through the digital tier from the PCB. The assembly has no peripheral functional blocks, and hence the active area extends to the edge of the detector. This was achieved by using a few flavors of almost identical analog pixels (minimal variation in layout) to allow for peripheral biasing blocks to be placed within pixels. The 1024 pixels within a digital sub-chip array have a variety of full custom, semi-custom and automated timing driven functional blocks placed together. The methodology uses a modified mixed-mode on-top digital implementation flow to not only harness the tool efficiency for timing and floor-planning but also to maintain designer control over compact parasitically aware layout. The methodology uses the Cadence design platform, however it is not limited to this tool.« less

Design methodology: edgeless 3D ASICs with complex in-pixel processing for pixel detectors

NASA Astrophysics Data System (ADS)

Fahim, Farah; Deptuch, Grzegorz W.; Hoff, James R.; Mohseni, Hooman

2015-08-01

The design methodology for the development of 3D integrated edgeless pixel detectors with in-pixel processing using Electronic Design Automation (EDA) tools is presented. A large area 3 tier 3D detector with one sensor layer and two ASIC layers containing one analog and one digital tier, is built for x-ray photon time of arrival measurement and imaging. A full custom analog pixel is 65μm x 65μm. It is connected to a sensor pixel of the same size on one side, and on the other side it has approximately 40 connections to the digital pixel. A 32 x 32 edgeless array without any peripheral functional blocks constitutes a sub-chip. The sub-chip is an indivisible unit, which is further arranged in a 6 x 6 array to create the entire 1.248cm x 1.248cm ASIC. Each chip has 720 bump-bond I/O connections, on the back of the digital tier to the ceramic PCB. All the analog tier power and biasing is conveyed through the digital tier from the PCB. The assembly has no peripheral functional blocks, and hence the active area extends to the edge of the detector. This was achieved by using a few flavors of almost identical analog pixels (minimal variation in layout) to allow for peripheral biasing blocks to be placed within pixels. The 1024 pixels within a digital sub-chip array have a variety of full custom, semi-custom and automated timing driven functional blocks placed together. The methodology uses a modified mixed-mode on-top digital implementation flow to not only harness the tool efficiency for timing and floor-planning but also to maintain designer control over compact parasitically aware layout. The methodology uses the Cadence design platform, however it is not limited to this tool.

Design Time Optimization for Hardware Watermarking Protection of HDL Designs

PubMed Central

Castillo, E.; Morales, D. P.; García, A.; Parrilla, L.; Todorovich, E.; Meyer-Baese, U.

2015-01-01

HDL-level design offers important advantages for the application of watermarking to IP cores, but its complexity also requires tools automating these watermarking algorithms. A new tool for signature distribution through combinational logic is proposed in this work. IPP@HDL, a previously proposed high-level watermarking technique, has been employed for evaluating the tool. IPP@HDL relies on spreading the bits of a digital signature at the HDL design level using combinational logic included within the original system. The development of this new tool for the signature distribution has not only extended and eased the applicability of this IPP technique, but it has also improved the signature hosting process itself. Three algorithms were studied in order to develop this automated tool. The selection of a cost function determines the best hosting solutions in terms of area and performance penalties on the IP core to protect. An 1D-DWT core and MD5 and SHA1 digital signatures were used in order to illustrate the benefits of the new tool and its optimization related to the extraction logic resources. Among the proposed algorithms, the alternative based on simulated annealing reduces the additional resources while maintaining an acceptable computation time and also saving designer effort and time. PMID:25861681

From development to implementation-A smartphone and email-based discharge follow-up program for pediatric patients after hospital discharge.

PubMed

Hopkins, Israel Green; Dunn, Kelly; Bourgeois, Fabienne; Rogers, Jayne; Chiang, Vincent W

2016-06-01

The purpose of this case study was to investigate opportunities to electronically enhance the transitions of care for both patients and providers and to describe the process of development and implementation of such tools. We describe the current challenges and fragmentation of care for pediatric patients and families being discharged from inpatient stays, and review barriers to change in practice. Care transitions vary in the complexity of the clinical and social scenarios and no one-size-fits-all approach works for every patient, provider or hospital system. A substantial challenge that providers who are designing and implementing digital tools for patients surrounds the complexity in building such tools to apply to such broad populations. Our case study provides a framework using a multidisciplinary approach, brainstorming and rapid digital prototyping to build an in-house electronic discharge follow-up platform. In describing this process, we review design and implementation measures that may further support digital tool development in other areas. Copyright © 2015 Elsevier Inc. All rights reserved.

Digital Game-Based Learning Once Removed: Teaching Teachers

ERIC Educational Resources Information Center

Becker, Katrin

2007-01-01

In the spring of 2005, the author designed and taught a graduate-level course on digital game-based learning primarily for teachers. Teachers cannot be expected to embrace digital games as a tool for learning unless they have a sound understanding of the potential as well as the limitations, and are confident in their ability to use games…

Development strategy and process models for phased automation of design and digital manufacturing electronics

NASA Astrophysics Data System (ADS)

Korshunov, G. I.; Petrushevskaya, A. A.; Lipatnikov, V. A.; Smirnova, M. S.

2018-03-01

The strategy of quality of electronics insurance is represented as most important. To provide quality, the processes sequence is considered and modeled by Markov chain. The improvement is distinguished by simple database means of design for manufacturing for future step-by-step development. Phased automation of design and digital manufacturing electronics is supposed. The MatLab modelling results showed effectiveness increase. New tools and software should be more effective. The primary digital model is proposed to represent product in the processes sequence from several processes till the whole life circle.

Automated Design of Board and MCM Level Digital Systems.

DTIC Science & Technology

1997-10-01

Partitioning for Multicomponent Synthesis 159 Appendix K: Resource Constrained RTL Partitioning for Synthesis of Multi- FPGA Designs 169 Appendix L...digital signal processing) ar- chitectures. These target architectures, illustrated in Figure 1, can contain application-specific ASICS, FPGAs ...synthesis tools for ASIC, FPGA and MCM synthesis (Figure 8). Multicomponent Partitioning Engine The par- titioning engine is a hierarchical partitioning

Technological Improvements for Digital Fire Control Systems

DTIC Science & Technology

2017-09-30

Final Technical Status Report For DOTC-12-01-INIT061 Technological Improvements for Digital Fire Control Systems Reporting Period: 30 Sep...Initiative Information Develop and fabricate next generation designs using advanced materials and processes. This will include but is not limited to...4.2 Develop manufacturing processes 100% 4.3 Develop manufacturing processes 100% 4.4 Develop manufacturing processes 100% 5 Design Tooling

Navigation and Elctro-Optic Sensor Integration Technology for Fusion of Imagery and Digital Mapping Products

DTIC Science & Technology

1999-08-01

Electro - Optic Sensor Integration Technology (NEOSIT) software application. The design is highly modular and based on COTS tools to facilitate integration with sensors, navigation and digital data sources already installed on different host

Parallel digital forensics infrastructure.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liebrock, Lorie M.; Duggan, David Patrick

2009-10-01

This report documents the architecture and implementation of a Parallel Digital Forensics infrastructure. This infrastructure is necessary for supporting the design, implementation, and testing of new classes of parallel digital forensics tools. Digital Forensics has become extremely difficult with data sets of one terabyte and larger. The only way to overcome the processing time of these large sets is to identify and develop new parallel algorithms for performing the analysis. To support algorithm research, a flexible base infrastructure is required. A candidate architecture for this base infrastructure was designed, instantiated, and tested by this project, in collaboration with New Mexicomore » Tech. Previous infrastructures were not designed and built specifically for the development and testing of parallel algorithms. With the size of forensics data sets only expected to increase significantly, this type of infrastructure support is necessary for continued research in parallel digital forensics. This report documents the implementation of the parallel digital forensics (PDF) infrastructure architecture and implementation.« less

DRS: Derivational Reasoning System

NASA Technical Reports Server (NTRS)

Bose, Bhaskar

1995-01-01

The high reliability requirements for airborne systems requires fault-tolerant architectures to address failures in the presence of physical faults, and the elimination of design flaws during the specification and validation phase of the design cycle. Although much progress has been made in developing methods to address physical faults, design flaws remain a serious problem. Formal methods provides a mathematical basis for removing design flaws from digital systems. DRS (Derivational Reasoning System) is a formal design tool based on advanced research in mathematical modeling and formal synthesis. The system implements a basic design algebra for synthesizing digital circuit descriptions from high level functional specifications. DRS incorporates an executable specification language, a set of correctness preserving transformations, verification interface, and a logic synthesis interface, making it a powerful tool for realizing hardware from abstract specifications. DRS integrates recent advances in transformational reasoning, automated theorem proving and high-level CAD synthesis systems in order to provide enhanced reliability in designs with reduced time and cost.

Expert Consensus Survey on Digital Health Tools for Patients With Serious Mental Illness: Optimizing for User Characteristics and User Support.

PubMed

Hatch, Ainslie; Hoffman, Julia E; Ross, Ruth; Docherty, John P

2018-06-12

Digital technology is increasingly being used to enhance health care in various areas of medicine. In the area of serious mental illness, it is important to understand the special characteristics of target users that may influence motivation and competence to use digital health tools, as well as the resources and training necessary for these patients to facilitate the use of this technology. The aim of this study was to conduct a quantitative expert consensus survey to identify key characteristics of target users (patients and health care professionals), barriers and facilitators for appropriate use, and resources needed to optimize the use of digital health tools in patients with serious mental illness. A panel of 40 experts in digital behavioral health who met the participation criteria completed a 19-question survey, rating predefined responses on a 9-point Likert scale. Consensus was determined using a chi-square test of score distributions across three ranges (1-3, 4-6, 7-9). Categorical ratings of first, second, or third line were designated based on the lowest category into which the CI of the mean ratings fell, with a boundary >6.5 for first line. Here, we report experts' responses to nine questions (265 options) that focused on (1) user characteristics that would promote or hinder the use of digital health tools, (2) potential benefits or motivators and barriers or unintended consequences of digital health tool use, and (3) support and training for patients and health care professionals. Among patient characteristics most likely to promote use of digital health tools, experts endorsed interest in using state-of-the-art technology, availability of necessary resources, good occupational functioning, and perception of the tool as beneficial. Certain disease-associated signs and symptoms (eg, more severe symptoms, substance abuse problems, and a chaotic living situation) were considered likely to make it difficult for patients to use digital health tools. Enthusiasm among health care professionals for digital health tools and availability of staff and equipment to support their use were identified as variables to enable health care professionals to successfully incorporate digital health tools into their practices. The experts identified a number of potential benefits of and barriers to use of digital health tools by patients and health care professionals. Experts agreed that both health care professionals and patients would need to be trained in the use of these new technologies. These results provide guidance to the mental health field on how to optimize the development and deployment of digital health tools for patients with serious mental illness. ©Ainslie Hatch, Julia E Hoffman, Ruth Ross, John P Docherty. Originally published in JMIR Mental Health (http://mental.jmir.org), 12.06.2018.

Research on Mathematics Teachers as Partners in Task Design

ERIC Educational Resources Information Center

Jones, Keith; Pepin, Birgit

2016-01-01

Mathematical tasks and tools, including tasks in the form of digital tools, are key resources in mathematics teaching and in mathematics teacher education. Even so, the "design" of mathematical tasks is perceived in different ways: sometimes seen as something distinct from the teaching and learning process, and sometimes as integral to…

Contrasting the Use of Tools for Presentation and Critique: Some Cases from Architectural Education

ERIC Educational Resources Information Center

Lymer, Gustav; Ivarsson, Jonas; Lindwall, Oskar

2009-01-01

This study investigates video recordings of design reviews in architectural education, focusing on how presentations and discussions of designs are contingent on the specific tools employed. In the analyzed recordings, three different setups are utilized: traditional posters, digital slide-show technologies, and combinations of the two. This range…

A digital flight control system verification laboratory

NASA Technical Reports Server (NTRS)

De Feo, P.; Saib, S.

1982-01-01

A NASA/FAA program has been established for the verification and validation of digital flight control systems (DFCS), with the primary objective being the development and analysis of automated verification tools. In order to enhance the capabilities, effectiveness, and ease of using the test environment, software verification tools can be applied. Tool design includes a static analyzer, an assertion generator, a symbolic executor, a dynamic analysis instrument, and an automated documentation generator. Static and dynamic tools are integrated with error detection capabilities, resulting in a facility which analyzes a representative testbed of DFCS software. Future investigations will ensue particularly in the areas of increase in the number of software test tools, and a cost effectiveness assessment.

E-Learning Content Design Standards Based on Interactive Digital Concepts Maps in the Light of Meaningful and Constructivist Learning Theory

ERIC Educational Resources Information Center

Afify, Mohammed Kamal

2018-01-01

The present study aims to identify standards of interactive digital concepts maps design and their measurement indicators as a tool to develop, organize and administer e-learning content in the light of Meaningful Learning Theory and Constructivist Learning Theory. To achieve the objective of the research, the author prepared a list of E-learning…

Nonlinear Shaping Architecture Designed with Using Evolutionary Structural Optimization Tools

NASA Astrophysics Data System (ADS)

Januszkiewicz, Krystyna; Banachowicz, Marta

2017-10-01

The paper explores the possibilities of using Structural Optimization Tools (ESO) digital tools in an integrated structural and architectural design in response to the current needs geared towards sustainability, combining ecological and economic efficiency. The first part of the paper defines the Evolutionary Structural Optimization tools, which were developed specifically for engineering purposes using finite element analysis as a framework. The development of ESO has led to several incarnations, which are all briefly discussed (Additive ESO, Bi-directional ESO, Extended ESO). The second part presents result of using these tools in structural and architectural design. Actual building projects which involve optimization as a part of the original design process will be presented (Crematorium in Kakamigahara Gifu, Japan, 2006 SANAA“s Learning Centre, EPFL in Lausanne, Switzerland 2008 among others). The conclusion emphasizes that the structural engineering and architectural design mean directing attention to the solutions which are used by Nature, designing works optimally shaped and forming their own environments. Architectural forms never constitute the optimum shape derived through a form-finding process driven only by structural optimization, but rather embody and integrate a multitude of parameters. It might be assumed that there is a similarity between these processes in nature and the presented design methods. Contemporary digital methods make the simulation of such processes possible, and thus enable us to refer back to the empirical methods of previous generations.

A Simple Instrument Designed to Provide Consistent Digital Facial Images in Dermatology

PubMed Central

Nirmal, Balakrishnan; Pai, Sathish B; Sripathi, Handattu

2013-01-01

Photography has proven to be a valuable tool in the field of dermatology. The major reason for poor photographs is the inability to produce comparable images in the subsequent follow ups. Combining digital photography with image processing software analysis brings consistency in tracking serial images. Digital photographs were taken with the aid of an instrument which we designed in our workshop to ensure that photographs were taken with identical patient positioning, camera angles and distance. It is of paramount importance in aesthetic dermatology to appreciate even subtle changes after each treatment session which can be achieved by taking consistent digital images. PMID:23723469

A simple instrument designed to provide consistent digital facial images in dermatology.

PubMed

Nirmal, Balakrishnan; Pai, Sathish B; Sripathi, Handattu

2013-05-01

Photography has proven to be a valuable tool in the field of dermatology. The major reason for poor photographs is the inability to produce comparable images in the subsequent follow ups. Combining digital photography with image processing software analysis brings consistency in tracking serial images. Digital photographs were taken with the aid of an instrument which we designed in our workshop to ensure that photographs were taken with identical patient positioning, camera angles and distance. It is of paramount importance in aesthetic dermatology to appreciate even subtle changes after each treatment session which can be achieved by taking consistent digital images.

Designers Workbench: Towards Real-Time Immersive Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuester, F; Duchaineau, M A; Hamann, B

2001-10-03

This paper introduces the DesignersWorkbench, a semi-immersive virtual environment for two-handed modeling, sculpting and analysis tasks. The paper outlines the fundamental tools, design metaphors and hardware components required for an intuitive real-time modeling system. As companies focus on streamlining productivity to cope with global competition, the migration to computer-aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE) systems has established a new backbone of modern industrial product development. However, traditionally a product design frequently originates from a clay model that, after digitization, forms the basis for the numerical description of CAD primitives. The DesignersWorkbench aims at closing this technologymore » or ''digital gap'' experienced by design and CAD engineers by transforming the classical design paradigm into its filly integrated digital and virtual analog allowing collaborative development in a semi-immersive virtual environment. This project emphasizes two key components from the classical product design cycle: freeform modeling and analysis. In the freeform modeling stage, content creation in the form of two-handed sculpting of arbitrary objects using polygonal, volumetric or mathematically defined primitives is emphasized, whereas the analysis component provides the tools required for pre- and post-processing steps for finite element analysis tasks applied to the created models.« less

Quantitative fractography by digital image processing: NIH Image macro tools for stereo pair analysis and 3-D reconstruction.

PubMed

Hein, L R

2001-10-01

A set of NIH Image macro programs was developed to make qualitative and quantitative analyses from digital stereo pictures produced by scanning electron microscopes. These tools were designed for image alignment, anaglyph representation, animation, reconstruction of true elevation surfaces, reconstruction of elevation profiles, true-scale elevation mapping and, for the quantitative approach, surface area and roughness calculations. Limitations on time processing, scanning techniques and programming concepts are also discussed.

CMOS based capacitance to digital converter circuit for MEMS sensor

NASA Astrophysics Data System (ADS)

Rotake, D. R.; Darji, A. D.

2018-02-01

Most of the MEMS cantilever based system required costly instruments for characterization, processing and also has large experimental setups which led to non-portable device. So there is a need of low cost, highly sensitive, high speed and portable digital system. The proposed Capacitance to Digital Converter (CDC) interfacing circuit converts capacitance to digital domain which can be easily processed. Recent demand microcantilever deflection is part per trillion ranges which change the capacitance in 1-10 femto farad (fF) range. The entire CDC circuit is designed using CMOS 250nm technology. Design of CDC circuit consists of a D-latch and two oscillators, namely Sensor controlled oscillator (SCO) and digitally controlled oscillator (DCO). The D-latch is designed using transmission gate based MUX for power optimization. A CDC design of 7-stage, 9-stage and 11-stage tested for 1-18 fF and simulated using mentor graphics Eldo tool with parasitic. Since the proposed design does not use resistance component, the total power dissipation is reduced to 2.3621 mW for CDC designed using 9-stage SCO and DCO.

RADC SCAT automated sneak circuit analysis tool

NASA Astrophysics Data System (ADS)

Depalma, Edward L.

The sneak circuit analysis tool (SCAT) provides a PC-based system for real-time identification (during the design phase) of sneak paths and design concerns. The tool utilizes an expert system shell to assist the analyst so that prior experience with sneak analysis is not necessary for performance. Both sneak circuits and design concerns are targeted by this tool, with both digital and analog circuits being examined. SCAT focuses the analysis at the assembly level, rather than the entire system, so that most sneak problems can be identified and corrected by the responsible design engineer in a timely manner. The SCAT program identifies the sneak circuits to the designer, who then decides what course of action is necessary.

A simple tool for stereological assessment of digital images: the STEPanizer.

PubMed

Tschanz, S A; Burri, P H; Weibel, E R

2011-07-01

STEPanizer is an easy-to-use computer-based software tool for the stereological assessment of digitally captured images from all kinds of microscopical (LM, TEM, LSM) and macroscopical (radiology, tomography) imaging modalities. The program design focuses on providing the user a defined workflow adapted to most basic stereological tasks. The software is compact, that is user friendly without being bulky. STEPanizer comprises the creation of test systems, the appropriate display of digital images with superimposed test systems, a scaling facility, a counting module and an export function for the transfer of results to spreadsheet programs. Here we describe the major workflow of the tool illustrating the application on two examples from transmission electron microscopy and light microscopy, respectively. © 2011 The Authors Journal of Microscopy © 2011 Royal Microscopical Society.

Path programmable logic: A structured design method for digital and/or mixed analog integrated circuits

NASA Technical Reports Server (NTRS)

Taylor, B.

1990-01-01

The design of Integrated Circuits has evolved past the black art practiced by a few semiconductor companies to a world wide community of users. This was basically accomplished by the development of computer aided design tools which were made available to this community. As the tools matured into different components of the design task they were accepted into the community at large. However, the next step in this evolution is being ignored by the large tool vendors hindering the continuation of this process. With system level definition and simulation through the logic specification well understood, why is the physical generation so blatantly ignored. This portion of the development is still treated as an isolated task with information being passed from the designer to the layout function. Some form of result given back but it severely lacks full definition of what has transpired. The level of integration in I.C.'s for tomorrow, whether through new processes or applications will require higher speeds, increased transistor density, and non-digital performance which can only be achieved through attention to the physical implementation.

Portfolio: a prototype workstation for development and evaluation of tools for analysis and management of digital portal images.

PubMed

Boxwala, A A; Chaney, E L; Fritsch, D S; Friedman, C P; Rosenman, J G

1998-09-01

The purpose of this investigation was to design and implement a prototype physician workstation, called PortFolio, as a platform for developing and evaluating, by means of controlled observer studies, user interfaces and interactive tools for analyzing and managing digital portal images. The first observer study was designed to measure physician acceptance of workstation technology, as an alternative to a view box, for inspection and analysis of portal images for detection of treatment setup errors. The observer study was conducted in a controlled experimental setting to evaluate physician acceptance of the prototype workstation technology exemplified by PortFolio. PortFolio incorporates a windows user interface, a compact kit of carefully selected image analysis tools, and an object-oriented data base infrastructure. The kit evaluated in the observer study included tools for contrast enhancement, registration, and multimodal image visualization. Acceptance was measured in the context of performing portal image analysis in a structured protocol designed to simulate clinical practice. The acceptability and usage patterns were measured from semistructured questionnaires and logs of user interactions. Radiation oncologists, the subjects for this study, perceived the tools in PortFolio to be acceptable clinical aids. Concerns were expressed regarding user efficiency, particularly with respect to the image registration tools. The results of our observer study indicate that workstation technology is acceptable to radiation oncologists as an alternative to a view box for clinical detection of setup errors from digital portal images. Improvements in implementation, including more tools and a greater degree of automation in the image analysis tasks, are needed to make PortFolio more clinically practical.

Analysis and simulation tools for solar array power systems

NASA Astrophysics Data System (ADS)

Pongratananukul, Nattorn

This dissertation presents simulation tools developed specifically for the design of solar array power systems. Contributions are made in several aspects of the system design phases, including solar source modeling, system simulation, and controller verification. A tool to automate the study of solar array configurations using general purpose circuit simulators has been developed based on the modeling of individual solar cells. Hierarchical structure of solar cell elements, including semiconductor properties, allows simulation of electrical properties as well as the evaluation of the impact of environmental conditions. A second developed tool provides a co-simulation platform with the capability to verify the performance of an actual digital controller implemented in programmable hardware such as a DSP processor, while the entire solar array including the DC-DC power converter is modeled in software algorithms running on a computer. This "virtual plant" allows developing and debugging code for the digital controller, and also to improve the control algorithm. One important task in solar arrays is to track the maximum power point on the array in order to maximize the power that can be delivered. Digital controllers implemented with programmable processors are particularly attractive for this task because sophisticated tracking algorithms can be implemented and revised when needed to optimize their performance. The proposed co-simulation tools are thus very valuable in developing and optimizing the control algorithm, before the system is built. Examples that demonstrate the effectiveness of the proposed methodologies are presented. The proposed simulation tools are also valuable in the design of multi-channel arrays. In the specific system that we have designed and tested, the control algorithm is implemented on a single digital signal processor. In each of the channels the maximum power point is tracked individually. In the prototype we built, off-the-shelf commercial DC-DC converters were utilized. At the end, the overall performance of the entire system was evaluated using solar array simulators capable of simulating various I-V characteristics, and also by using an electronic load. Experimental results are presented.

Image microarrays (IMA): Digital pathology's missing tool

PubMed Central

Hipp, Jason; Cheng, Jerome; Pantanowitz, Liron; Hewitt, Stephen; Yagi, Yukako; Monaco, James; Madabhushi, Anant; Rodriguez-canales, Jaime; Hanson, Jeffrey; Roy-Chowdhuri, Sinchita; Filie, Armando C.; Feldman, Michael D.; Tomaszewski, John E.; Shih, Natalie NC.; Brodsky, Victor; Giaccone, Giuseppe; Emmert-Buck, Michael R.; Balis, Ulysses J.

2011-01-01

Introduction: The increasing availability of whole slide imaging (WSI) data sets (digital slides) from glass slides offers new opportunities for the development of computer-aided diagnostic (CAD) algorithms. With the all-digital pathology workflow that these data sets will enable in the near future, literally millions of digital slides will be generated and stored. Consequently, the field in general and pathologists, specifically, will need tools to help extract actionable information from this new and vast collective repository. Methods: To address this limitation, we designed and implemented a tool (dCORE) to enable the systematic capture of image tiles with constrained size and resolution that contain desired histopathologic features. Results: In this communication, we describe a user-friendly tool that will enable pathologists to mine digital slides archives to create image microarrays (IMAs). IMAs are to digital slides as tissue microarrays (TMAs) are to cell blocks. Thus, a single digital slide could be transformed into an array of hundreds to thousands of high quality digital images, with each containing key diagnostic morphologies and appropriate controls. Current manual digital image cut-and-paste methods that allow for the creation of a grid of images (such as an IMA) of matching resolutions are tedious. Conclusion: The ability to create IMAs representing hundreds to thousands of vetted morphologic features has numerous applications in education, proficiency testing, consensus case review, and research. Lastly, in a manner analogous to the way conventional TMA technology has significantly accelerated in situ studies of tissue specimens use of IMAs has similar potential to significantly accelerate CAD algorithm development. PMID:22200030

Graphic Design Is Not a Medium.

ERIC Educational Resources Information Center

Gruber, John Edward, Jr.

2001-01-01

Discusses graphic design and reviews its development from analog processes to a digital tool with the use of computers. Topics include graphical user interfaces; the need for visual communication concepts; transmedia as opposed to repurposing; and graphic design instruction in higher education. (LRW)

Specification and Design Methodologies for High-Speed Fault-Tolerant Array Algorithms and Structures for VLSI.

DTIC Science & Technology

1987-06-01

evaluation and chip layout planning for VLSI digital systems. A high-level applicative (functional) language, implemented at UCLA, allows combining of...operating system. 2.1 Introduction The complexity of VLSI requires the application of CAD tools at all levels of the design process. In order to be...effective, these tools must be adaptive to the specific design. In this project we studied a design method based on the use of applicative languages

Terrace Layout Using a Computer Assisted System

USDA-ARS?s Scientific Manuscript database

Development of a web-based terrace design tool based on the MOTERR program is presented, along with representative layouts for conventional and parallel terrace systems. Using digital elevation maps and geographic information systems (GIS), this tool utilizes personal computers to rapidly construct ...

Anatomical information in radiation treatment planning.

PubMed

Kalet, I J; Wu, J; Lease, M; Austin-Seymour, M M; Brinkley, J F; Rosse, C

1999-01-01

We report on experience and insights gained from prototyping, for clinical radiation oncologists, a new access tool for the University of Washington Digital Anatomist information resources. This access tool is designed to integrate with a radiation therapy planning (RTP) system in use in a clinical setting. We hypothesize that the needs of practitioners in a clinical setting are different from the needs of students, the original targeted users of the Digital Anatomist system, but that a common knowledge resource can serve both. Our prototype was designed to help define those differences and study the feasibility of a full anatomic reference system that will support both clinical radiation therapy and all the existing educational applications.

Liberating Learning Object Design from the Learning Style of Student Instructional Designers

ERIC Educational Resources Information Center

Akpinar, Yavuz

2007-01-01

Learning objects are a new form of learning resource, and the design of these digital environments has many facets. To investigate senior instructional design students' use of reflection tools in designing learning objects, a series of studies was conducted using the Reflective Action Instructional Design and Learning Object Review Instrument…

A Automated Tool for Supporting FMEAs of Digital Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yue,M.; Chu, T.-L.; Martinez-Guridi, G.

2008-09-07

Although designs of digital systems can be very different from each other, they typically use many of the same types of generic digital components. Determining the impacts of the failure modes of these generic components on a digital system can be used to support development of a reliability model of the system. A novel approach was proposed for such a purpose by decomposing the system into a level of the generic digital components and propagating failure modes to the system level, which generally is time-consuming and difficult to implement. To overcome the associated issues of implementing the proposed FMEA approach,more » an automated tool for a digital feedwater control system (DFWCS) has been developed in this study. The automated FMEA tool is in nature a simulation platform developed by using or recreating the original source code of the different module software interfaced by input and output variables that represent physical signals exchanged between modules, the system, and the controlled process. For any given failure mode, its impacts on associated signals are determined first and the variables that correspond to these signals are modified accordingly by the simulation. Criteria are also developed, as part of the simulation platform, to determine whether the system has lost its automatic control function, which is defined as a system failure in this study. The conceptual development of the automated FMEA support tool can be generalized and applied to support FMEAs for reliability assessment of complex digital systems.« less

An online planning tool for designing terrace layouts

USDA-ARS?s Scientific Manuscript database

A web-based conservation planning tool, WebTERLOC (web-based Terrace Location Program), was developed to provide multiple terrace layout options using digital elevation model (DEM) and geographic information systems (GIS). Development of a terrace system is complicated by the time-intensive manual ...

Radiometry simulation within the end-to-end simulation tool SENSOR

NASA Astrophysics Data System (ADS)

Wiest, Lorenz; Boerner, Anko

2001-02-01

12 An end-to-end simulation is a valuable tool for sensor system design, development, optimization, testing, and calibration. This contribution describes the radiometry module of the end-to-end simulation tool SENSOR. It features MODTRAN 4.0-based look up tables in conjunction with a cache-based multilinear interpolation algorithm to speed up radiometry calculations. It employs a linear reflectance parameterization to reduce look up table size, considers effects due to the topology of a digital elevation model (surface slope, sky view factor) and uses a reflectance class feature map to assign Lambertian and BRDF reflectance properties to the digital elevation model. The overall consistency of the radiometry part is demonstrated by good agreement between ATCOR 4-retrieved reflectance spectra of a simulated digital image cube and the original reflectance spectra used to simulate this image data cube.

Can the Use of Web-Based Comic Strip Creation Tool Facilitate EFL Learners' Grammar and Sentence Writing?

ERIC Educational Resources Information Center

Kilickaya, Ferit; Krajka, Jaroslaw

2012-01-01

Both teacher- and learner-made computer visuals are quite extensively reported in Computer-Assisted Language Learning literature, for instance, filming interviews, soap operas or mini-documentaries, creating storyboard projects, authoring podcasts and vodcasts, designing digital stories. Such student-made digital assets are used to present to…

The Effects of Digital Learning Material on Students' Mathematics Learning in Vocational Education

ERIC Educational Resources Information Center

Zwart, Diana P.; Van Luit, Johannes E. H.; Noroozi, Omid; Goei, Sui Lin

2017-01-01

This study investigates the effects of Digital Learning Material (DLM) including instructional clips, online guidance, structuring of content, and a collaboration tool on students' mathematics learning in Dutch vocational education. A pretest-posttest design was used. Apprenticeship students were asked to complete assignments and to discuss them…

ASK-LDT 2.0: A Web-Based Graphical Tool for Authoring Learning Designs

ERIC Educational Resources Information Center

Zervas, Panagiotis; Fragkos, Konstantinos; Sampson, Demetrios G.

2013-01-01

During the last decade, Open Educational Resources (OERs) have gained increased attention for their potential to support open access, sharing and reuse of digital educational resources. Therefore, a large amount of digital educational resources have become available worldwide through web-based open access repositories which are referred to as…

Leveraging Digital Tools to Build Educative Curricula for Teachers: Two Promising Approaches

ERIC Educational Resources Information Center

Bates, Meg S.

2017-01-01

Well-designed curriculum materials include educative components that help teachers effectively plan, implement, and adapt activities for diverse learners. Digital materials offer several affordances over print materials in the format, fit, and flexibility of the educative information provided to teachers, as well as the ability of the materials to…

Designing Science Learning with Game-Based Approaches

ERIC Educational Resources Information Center

Liu, Min; Rosenblum, Jason A.; Horton, Lucas; Kang, Jina

2014-01-01

Given the growing popularity of digital games as a form of entertainment, educators are interested in exploring using digital games as a tool to facilitate learning. In this study, we examine game-based learning by describing a learning environment that combines game elements, play, and authenticity in the real world for the purpose of engaging…

Digital Inclusion & Health Communication: A Rapid Review of Literature.

PubMed

Borg, Kim; Boulet, Mark; Smith, Liam; Bragge, Peter

2018-06-11

Information and communication technologies can be a valuable tool for enhancing health communication. However, not everyone is utilising the wide suite of digital opportunities. This disparity has the potential to exacerbate existing social and health inequalities, particularly among vulnerable groups such as those who are in poor health and the elderly. This review aimed to systematically identify the common barriers to, and facilitators of, digital inclusion. A comprehensive database search yielded 969 citations. Following screening, seven systematic reviews and three non-systematic reviews were identified. Collectively, the reviews found that physical access continues to be a barrier to digital inclusion. However, provision of access alone is insufficient, as digital ability and attitude were also potential barriers. Social support, direct user experience and collaborative learning/design were identified as key strategies to improve inclusion. These review findings provide guidance for health communication practitioners in designing and implementing effective programmes in the digital environment.

Global GIS database; digital atlas of South Pacific

USGS Publications Warehouse

Hearn, P.P.; Hare, T.M.; Schruben, P.; Sherrill, D.; LaMar, C.; Tsushima, P.

2001-01-01

This CD-ROM contains a digital atlas of the countries of the South Pacific. This atlas is part of a global database compiled from USGS and other data sources at a nominal scale of 1:1 million and is intended to be used as a regional-scale reference and analytical tool by government officials, researchers, the private sector, and the general public. The atlas includes free GIS software or may be used with ESRI's ArcView software. Customized ArcView tools, specifically designed to make the atlas easier to use, are also included.

Global GIS database; digital atlas of Africa

USGS Publications Warehouse

Hearn, P.P.; Hare, T.M.; Schruben, P.; Sherrill, D.; LaMar, C.; Tsushima, P.

2001-01-01

This CD-ROM contains a digital atlas of the countries of Africa. This atlas is part of a global database compiled from USGS and other data sources at a nominal scale of 1:1 million and is intended to be used as a regional-scale reference and analytical tool by government officials, researchers, the private sector, and the general public. The atlas includes free GIS software or may be used with ESRI's ArcView software. Customized ArcView tools, specifically designed to make this atlas easier to use, are also included.

Global GIS database; digital atlas of South Asia

USGS Publications Warehouse

Hearn, P.P.; Hare, T.M.; Schruben, P.; Sherrill, D.; LaMar, C.; Tsushima, P.

2001-01-01

This CD-ROM contains a digital atlas of the countries of South Asia. This atlas is part of a global database compiled from USGS and other data sources at a nominal scale 1:1 million and is intended to be used as a regional-scale reference and analytical tool by government officials, researchers, the private sector, and the general public. The atlas includes free GIS software or may be used with ESRI's ArcView software. Customized ArcView tools, specifically designed to make the atlas easier to use, are also included.

Circuit design tool. User's manual, revision 2

NASA Technical Reports Server (NTRS)

Miyake, Keith M.; Smith, Donald E.

1992-01-01

The CAM chip design was produced in a UNIX software environment using a design tool that supports definition of digital electronic modules, composition of these modules into higher level circuits, and event-driven simulation of these circuits. Our design tool provides an interface whose goals include straightforward but flexible primitive module definition and circuit composition, efficient simulation, and a debugging environment that facilitates design verification and alteration. The tool provides a set of primitive modules which can be composed into higher level circuits. Each module is a C-language subroutine that uses a set of interface protocols understood by the design tool. Primitives can be altered simply by recoding their C-code image; in addition new primitives can be added allowing higher level circuits to be described in C-code rather than as a composition of primitive modules--this feature can greatly enhance the speed of simulation.

Effects of digital game-based learning on student engagement and academic achievement

NASA Astrophysics Data System (ADS)

Little, Timothy W.

This experimental study was designed to determine the effect of digital game-based learning on student engagement and academic achievement. The sample was comprised of 34 students enrolled in a secondary Biology class in a rural public school. The study utilized an experimental pretest-posttest design with switching replications. After random assignment, students participated in one of two supplemental learning activities: playing a digital game designed to review science concepts or participating in a lab to review the same concepts. Students subsequently switched activities. Student achievement data were collected on mastery of science concepts, and student engagement data were collected utilizing self- and teacher-reported measures. Data were analyzed using analysis of variance (ANOVA) with repeated measures. Results demonstrated that the digital game was as effective as the lab activity at increasing teacher-reported student engagement and academic achievement. These findings may be of interest to school administrators or directors of teacher preparation programs on the potential effectiveness of digital games as a learning tool.

Theoretical design and analysis of multivolume digital assays with wide dynamic range validated experimentally with microfluidic digital PCR.

PubMed

Kreutz, Jason E; Munson, Todd; Huynh, Toan; Shen, Feng; Du, Wenbin; Ismagilov, Rustem F

2011-11-01

This paper presents a protocol using theoretical methods and free software to design and analyze multivolume digital PCR (MV digital PCR) devices; the theory and software are also applicable to design and analysis of dilution series in digital PCR. MV digital PCR minimizes the total number of wells required for "digital" (single molecule) measurements while maintaining high dynamic range and high resolution. In some examples, multivolume designs with fewer than 200 total wells are predicted to provide dynamic range with 5-fold resolution similar to that of single-volume designs requiring 12,000 wells. Mathematical techniques were utilized and expanded to maximize the information obtained from each experiment and to quantify performance of devices and were experimentally validated using the SlipChip platform. MV digital PCR was demonstrated to perform reliably, and results from wells of different volumes agreed with one another. No artifacts due to different surface-to-volume ratios were observed, and single molecule amplification in volumes ranging from 1 to 125 nL was self-consistent. The device presented here was designed to meet the testing requirements for measuring clinically relevant levels of HIV viral load at the point-of-care (in plasma, <500 molecules/mL to >1,000,000 molecules/mL), and the predicted resolution and dynamic range was experimentally validated using a control sequence of DNA. This approach simplifies digital PCR experiments, saves space, and thus enables multiplexing using separate areas for each sample on one chip, and facilitates the development of new high-performance diagnostic tools for resource-limited applications. The theory and software presented here are general and are applicable to designing and analyzing other digital analytical platforms including digital immunoassays and digital bacterial analysis. It is not limited to SlipChip and could also be useful for the design of systems on platforms including valve-based and droplet-based platforms. In a separate publication by Shen et al. (J. Am. Chem. Soc., 2011, DOI: 10.1021/ja2060116), this approach is used to design and test digital RT-PCR devices for quantifying RNA.

3D Digital Legos for Teaching Security Protocols

ERIC Educational Resources Information Center

Yu, Li; Harrison, L.; Lu, Aidong; Li, Zhiwei; Wang, Weichao

2011-01-01

We have designed and developed a 3D digital Lego system as an education tool for teaching security protocols effectively in Information Assurance courses (Lego is a trademark of the LEGO Group. Here, we use it only to represent the pieces of a construction set.). Our approach applies the pedagogical methods learned from toy construction sets by…

A Funds of Knowledge Approach to the Appropriation of New Media in a High School Writing Classroom

ERIC Educational Resources Information Center

Schwartz, Lisa H.

2015-01-01

Youths' learner-generated designs, instantiated in digital practices, spaces and artifacts, are underutilized in schools. Additionally, digital media tools are often taken up in reductive ways that serve to perpetuate deficit discourses for youth from nondominant communities, rather than reflect the creativity and innovation that youth practice…

Data Manipulation in an XML-Based Digital Image Library

ERIC Educational Resources Information Center

Chang, Naicheng

2005-01-01

Purpose: To help to clarify the role of XML tools and standards in supporting transition and migration towards a fully XML-based environment for managing access to information. Design/methodology/approach: The Ching Digital Image Library, built on a three-tier architecture, is used as a source of examples to illustrate a number of methods of data…

Designing and Evaluating Representations to Model Pedagogy

ERIC Educational Resources Information Center

Masterman, Elizabeth; Craft, Brock

2013-01-01

This article presents the case for a theory-informed approach to designing and evaluating representations for implementation in digital tools to support Learning Design, using the framework of epistemic efficacy as an example. This framework, which is rooted in the literature of cognitive psychology, is operationalised through dimensions of fit…

Anti-Hassle Chip

NASA Technical Reports Server (NTRS)

1998-01-01

With assistance from NASA's Ames Research Center, the iTV Corporation has developed a full custom microprocessor that enables access to the Internet through a $49 device. The microprocessor is supported with a compliment of design tools for customization and adaptation as either a licensable core or as a complete microprocessor. Other uses include cell phones, DVD (digital versatile disk) players, cable modems, video conferencing equipment, digital cameras, wireless LANs (Local Area Network) and WANs (Wide Area Network). iTV continues to design new, low-cost consumer products.

Recipe for Success: Digital Viewables

NASA Technical Reports Server (NTRS)

LaPha, Steven; Gaydos, Frank

2014-01-01

The Engineering Services Contract (ESC) and Information Management Communication Support contract (IMCS) at Kennedy Space Center (KSC) provide services to NASA in respect to flight and ground systems design and development. These groups provides the necessary tools, aid, and best practice methodologies required for efficient, optimized design and process development. The team is responsible for configuring and implementing systems, software, along with training, documentation, and administering standards. The team supports over 200 engineers and design specialists with the use of Windchill, Creo Parametric, NX, AutoCAD, and a variety of other design and analysis tools.

3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors.

PubMed

Parra-Cabrera, Cesar; Achille, Clement; Kuhn, Simon; Ameloot, Rob

2018-01-02

Computer-aided fabrication technologies combined with simulation and data processing approaches are changing our way of manufacturing and designing functional objects. Also in the field of catalytic technology and chemical engineering the impact of additive manufacturing, also referred to as 3D printing, is steadily increasing thanks to a rapidly decreasing equipment threshold. Although still in an early stage, the rapid and seamless transition between digital data and physical objects enabled by these fabrication tools will benefit both research and manufacture of reactors and structured catalysts. Additive manufacturing closes the gap between theory and experiment, by enabling accurate fabrication of geometries optimized through computational fluid dynamics and the experimental evaluation of their properties. This review highlights the research using 3D printing and computational modeling as digital tools for the design and fabrication of reactors and structured catalysts. The goal of this contribution is to stimulate interactions at the crossroads of chemistry and materials science on the one hand and digital fabrication and computational modeling on the other.

The BOEING 777 - concurrent engineering and digital pre-assembly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abarbanel, B.

The processes created on the 777 for checking designs were called {open_quotes}digital pre-assembly{close_quotes}. Using FlyThru(tm), a spin-off of a Boeing advanced computing research project, engineers were able to view up to 1500 models (15000 solids) in 3d traversing that data at high speed. FlyThru(tm) was rapidly deployed in 1991 to meet the needs of the 777 for large scale product visualization and verification. The digital pre-assembly process has bad fantastic results. The 777 has had far fewer assembly and systems problems compared to previous airplane programs. Today, FlyThru(tm) is installed on hundreds of workstations on almost every airplane program, andmore » is being used on Space Station, F22, AWACS, and other defense projects. It`s applications have gone far beyond just design review. In many ways, FlyThru is a Data Warehouse supported by advanced tools for analysis. It is today being integrated with Knowledge Based Engineering geometry generation tools.« less

Inselect: Automating the Digitization of Natural History Collections

PubMed Central

Hudson, Lawrence N.; Blagoderov, Vladimir; Heaton, Alice; Holtzhausen, Pieter; Livermore, Laurence; Price, Benjamin W.; van der Walt, Stéfan; Smith, Vincent S.

2015-01-01

The world’s natural history collections constitute an enormous evidence base for scientific research on the natural world. To facilitate these studies and improve access to collections, many organisations are embarking on major programmes of digitization. This requires automated approaches to mass-digitization that support rapid imaging of specimens and associated data capture, in order to process the tens of millions of specimens common to most natural history collections. In this paper we present Inselect—a modular, easy-to-use, cross-platform suite of open-source software tools that supports the semi-automated processing of specimen images generated by natural history digitization programmes. The software is made up of a Windows, Mac OS X, and Linux desktop application, together with command-line tools that are designed for unattended operation on batches of images. Blending image visualisation algorithms that automatically recognise specimens together with workflows to support post-processing tasks such as barcode reading, label transcription and metadata capture, Inselect fills a critical gap to increase the rate of specimen digitization. PMID:26599208

Inselect: Automating the Digitization of Natural History Collections.

PubMed

Hudson, Lawrence N; Blagoderov, Vladimir; Heaton, Alice; Holtzhausen, Pieter; Livermore, Laurence; Price, Benjamin W; van der Walt, Stéfan; Smith, Vincent S

2015-01-01

The world's natural history collections constitute an enormous evidence base for scientific research on the natural world. To facilitate these studies and improve access to collections, many organisations are embarking on major programmes of digitization. This requires automated approaches to mass-digitization that support rapid imaging of specimens and associated data capture, in order to process the tens of millions of specimens common to most natural history collections. In this paper we present Inselect-a modular, easy-to-use, cross-platform suite of open-source software tools that supports the semi-automated processing of specimen images generated by natural history digitization programmes. The software is made up of a Windows, Mac OS X, and Linux desktop application, together with command-line tools that are designed for unattended operation on batches of images. Blending image visualisation algorithms that automatically recognise specimens together with workflows to support post-processing tasks such as barcode reading, label transcription and metadata capture, Inselect fills a critical gap to increase the rate of specimen digitization.

HDL-level automated watermarking of IP cores

NASA Astrophysics Data System (ADS)

Castillo, E.; Meyer-Baese, U.; Parrilla, L.; García, A.; Lloris, A.

2008-04-01

This paper presents significant improvements to our previous watermarking technique for Intellectual Property Protection (IPP) of IP cores. The technique relies on hosting the bits of a digital signature at the HDL design level using resources included within the original system. Thus, any attack trying to change or remove the digital signature will damage the design. The technique also includes a procedure for secure signature extraction requiring minimal modifications to the system. The new advances refer to increasing the applicability of this watermarking technique to any design, not only to those including look-ups, and the provision of an automatic tool for signature hosting purposes. Synthesis results show that the application of the proposed watermarking strategy results in negligible degradation of system performance and very low area penalties and that the use of the automated tool, in addition to easy the signature hosting, leads to reduced area penalties.

Integration of tablet technologies in the e-laboratory of cytology: a health technology assessment.

PubMed

Giansanti, Daniele; Pochini, Marco; Giovagnoli, Maria Rosaria

2014-10-01

Although tablet systems are becoming a powerful technology, particularly useful in every application of medical imaging, to date no one has investigated the acceptance and performance of this technology in digital cytology. The specific aims of the work were (1) to design a health technology assessment (HTA) tool to assess, in terms of performance and acceptance, the introduction of tablet technologies (wearable, portable, and non portable) in the e-laboratories of cytology and (2) to test the tool in a first significant application of digital cytology. An HTA tool was proposed operating on a domain of five dimensions of investigation comprising the basic information of the product of digital cytology, the perceived subjective quality of images, the assessment of the virtual navigation on the e-slide, the assessment of the information and communication technologies features, and the diagnostic power. Six e-slides regarding studies of cervicovaginal cytology digitalized by means of an Aperio ( www.aperio.com ) scanner and uploaded onto the www.digitalslide.it Web site were used for testing the methodology on three different network connections. Three experts of cytology successfully tested the methodology on seven tablets found suitable for the study in their own standard configuration. Specific indexes furnished by the tool indicated both a high degree of performance and subjective acceptance of the investigated technology. The HTA tool thus could be useful to investigate new tablet technologies in digital cytology and furnish stakeholders with useful information that may help them make decisions involving the healthcare system. From a global point of view the study demonstrates the feasibility of using the tablet technology in digital cytology.

Cool Tools for the New Frontier: Technological Advances Help Associates Tell Their Story.

ERIC Educational Resources Information Center

Hersch, James

1998-01-01

Argues that creation of a World Wide Web site that makes good use of the available digital audio and visual technologies can be useful in campus activities planning and advertising. The design of a good Web site and the potential uses of digital video and compact discs are discussed. Costs of these technologies are also outlined. (MSE)

Digital Storytelling with Pre-Service Teachers. Raising Awareness for Refugees through ICTS in ESL Primary Classes

ERIC Educational Resources Information Center

Alcantud Diaz, Maria

2016-01-01

This article describes the design and implementation of a Digital Storytelling (DS) experience that was carried out in a foreign language setting with pre-service teachers. This case study sets out to assess the effect of DS aimed at becoming a social awareness and pedagogical tool for both, high education and consequently, primary students. The…

Digital storytelling: a tool for health promotion and cancer awareness in rural Alaskan communities.

PubMed

Cueva, Melany; Kuhnley, Regina; Revels, Laura; Schoenberg, Nancy E; Dignan, Mark

2015-01-01

The purpose of this study was to learn community members' perspectives about digital storytelling after viewing a digital story created by a Community Health Aide/Practitioner (CHA/P). Using a qualitative research design, we explored digital storytelling likeability as a health-messaging tool, health information viewers reported learning and, if viewing, cancer-related digital stories facilitated increased comfort in talking about cancer. In addition, we enquired if the digital stories affected how viewers felt about cancer, as well as if viewing the digital stories resulted in health behaviour change or intent to change health behaviour. A total of 15 adult community members participated in a 30-45 minute interview, 1-5 months post-viewing of a CHA/P digital story. The majority (13) of viewers interviewed were female, all were Alaska Native and they ranged in age from 25 to 54 years with the average age being 40 years. Due to the small size of communities, which ranged in population from 160 to 2,639 people, all viewers knew the story creator or knew of the story creator. Viewers reported digital stories as an acceptable, emotionally engaging way to increase their cancer awareness and begin conversations. These conversations often served as a springboard for reflection, insight, and cancer-prevention and risk-reduction activities.

Digital storytelling: a tool for health promotion and cancer awareness in rural Alaskan communities.

PubMed

Cueva, Melany; Kuhnley, Regina; Revels, Laura; Schoenberg, Nancy E; Dignan, Mark

2015-01-01

Background The purpose of this study was to learn community members' perspectives about digital storytelling after viewing a digital story created by a Community Health Aide/Practitioner (CHA/P). Methods Using a qualitative research design, we explored digital storytelling likeability as a health-messaging tool, health information viewers reported learning and, if viewing, cancer-related digital stories facilitated increased comfort in talking about cancer. In addition, we enquired if the digital stories affected how viewers felt about cancer, as well as if viewing the digital stories resulted in health behaviour change or intent to change health behaviour. Findings A total of 15 adult community members participated in a 30-45 minute interview, 1-5 months post-viewing of a CHA/P digital story. The majority (13) of viewers interviewed were female, all were Alaska Native and they ranged in age from 25 to 54 years with the average age being 40 years. Due to the small size of communities, which ranged in population from 160 to 2,639 people, all viewers knew the story creator or knew of the story creator. Viewers reported digital stories as an acceptable, emotionally engaging way to increase their cancer awareness and begin conversations. These conversations often served as a springboard for reflection, insight, and cancer-prevention and risk-reduction activities.

Designing Philadelphia Land Science as a Game to Promote Identity Exploration

ERIC Educational Resources Information Center

Barany, Amanda; Shah, Mamta; Cellitti, Jessica; Duka, Migela; Swiecki, Zachari; Evenstone, Amanda; Kinley, Hannah; Quigley, Peter; Shaffer, David Williamson; Foster, Aroutis

2017-01-01

Few digital tools are designed to support identity exploration around careers in science, technology, engineering, and mathematics (STEM) that may help close existing representation gaps in STEM fields. The aim of this project is to inform the design of games that facilitate learning as identity change as defined by the Projective Reflection…

Design of the Digital Sky Survey DA and online system: A case history in the use of computer aided tools for data acquisition system design

NASA Astrophysics Data System (ADS)

Petravick, D.; Berman, E.; Nicinski, T.; Rechenmacher, R.; Oleynik, G.; Pordes, R.; Stoughton, C.

1991-06-01

As part of its expanding Astrophysics program, Fermilab is participating in the Digital Sky Survey (DSS). Fermilab is part of a collaboration involving University of Chicago, Princeton University, and the Institute of Advanced Studies (at Princeton). The DSS main results will be a photometric imaging survey and a redshift survey of galaxies and color-selected quasars over pi steradians of the Northern Galactic Cap. This paper focuses on our use of Computer Aided Software Engineering (CASE) in specifying the data system for DSS. Extensions to standard methodologies were necessary to compensate for tool shortcomings and to improve communication amongst the collaboration members. One such important extension was the incorporation of CASE information into the specification document.

Ed Tech Developer's Guide: A Primer for Software Developers, Startups, and Entrepreneurs

ERIC Educational Resources Information Center

Bienkowski, Marie; Gerard, Sarah Nixon; Rubin, Shawn; Sanford, Cathy; Borrelli-Murray, Dana; Driscoll, Tom; Arora, Jessie; Hruska, Mike; Beck, Katie; Murray, Thomas; Hoekstra, Jason; Gannes, Stuart; Metz, Edward; Midgley, Steve; Castilla, Stephanie; Tomassini, Jason; Madda, Mary Jo; Chase, Zac; Martin, Erik; Noel, Marcus; Styles, Kathleen

2015-01-01

Opportunities abound for software designers and developers to create impactful tools for teachers, school leaders, students, and their families. This guide for developers, startups, and entrepreneurs addresses key questions about the education ecosystem and highlights critical needs and opportunities to develop digital tools and apps for learning.…

Sentence-Based Metadata: An Approach and Tool for Viewing Database Designs.

ERIC Educational Resources Information Center

Boyle, John M.; Gunge, Jakob; Bryden, John; Librowski, Kaz; Hanna, Hsin-Yi

2002-01-01

Describes MARS (Museum Archive Retrieval System), a research tool which enables organizations to exchange digital images and documents by means of a common thesaurus structure, and merge the descriptive data and metadata of their collections. Highlights include theoretical basis; searching the MARS database; and examples in European museums.…

Value of wireless personal digital assistants for practice: perceptions of advanced practice nurses.

PubMed

Garrett, Bernard; Klein, Gerri

2008-08-01

The aims were to explore advanced practice nurses' perceptions on wireless Personal Digital Assistant technologies, to establish the type and range of tools that would be useful to support their practice and to identify any requirements and limitations that may impact the implementation of wireless Personal Digital Assistants in practice. The wireless Personal Digital Assistant is becoming established as a hand-held computing tool for healthcare professionals. The reflections of advanced practice nurses' about the value of wireless Personal Digital Assistants and its potential to contribute to improved patient care has not been investigated. A qualitative interpretivist design was used to explore advanced practice nurses' perceptions on the value of wireless Personal Digital Assistant technologies to support their practice. The data were collected using survey questionnaires and individual and focus group interviews with nurse practitioners, clinical nurse specialists and information technology managers based in British Columbia, Canada. An open-coding content analysis was performed using qualitative data analysis software. Wireless Personal Digital Assistant's use supports the principles of pervasivity and is a technology rapidly being adopted by advanced practice nurses. Some nurses indicated a reluctance to integrate wireless Personal Digital Assistant technologies into their practices because of the cost and the short technological life cycle of these devices. Many of the barriers which precluded the use of wireless networks within facilities are being removed. Nurses demonstrated a complex understanding of wireless Personal Digital Assistant technologies and gave good rationales for its integration in their practice. Nurses identified improved client care as the major benefit of this technology in practice and the type and range of tools they identified included clinical reference tools such as drug and diagnostic/laboratory reference applications and wireless communications. Nurses in this study support integrating wireless mobile computing technologies into their practice to improve client care.

Digital Badges for STEM Learning in Secondary Contexts: A Mixed Methods Study

NASA Astrophysics Data System (ADS)

Elkordy, Angela

The deficit in STEM skills is a matter of concern for national economies and a major focus for educational policy makers. The development of Information and Communications Technologies (ICT) has resulted in a rapidly changing workforce of global scale. In addition, ICT have fostered the growth of digital and mobile technologies which have been the learning context, formal and informal, for a generation of youth. The purpose of this study was to design an intervention based upon a competency-based, digitally-mediated, learning intervention: digital badges for learning STEM habits of mind and practices. Designed purposefully, digital badge learning trajectories and criteria can be flexible tools for scaffolding, measuring, and communicating the acquisition of knowledge, skills, or competencies. One of the most often discussed attributes of digital badges, is the ability of badges to motivate learners. However, the research base to support this claim is in its infancy; there is little empirical evidence. A skills-based digital badge intervention was designed to demonstrate mastery learning in key, age-appropriate, STEM competencies aligned with Next Generation Science Standards (NGSS) and other educational standards. A mixed methods approach was used to study the impact of a digital badge intervention in the sample middle and high school population. Among the findings were statistically significant measures which substantiate that in this student population, the digital badges increased perceived competence and motivated learners to persist at task.

Digital pathology in clinical use: where are we now and what is holding us back?

PubMed

Griffin, Jon; Treanor, Darren

2017-01-01

Whole slide imaging is being used increasingly in research applications and in frozen section, consultation and external quality assurance practice. Digital pathology, when integrated with other digital tools such as barcoding, specimen tracking and digital dictation, can be integrated into the histopathology workflow, from specimen accession to report sign-out. These elements can bring about improvements in the safety, quality and efficiency of a histopathology department. The present paper reviews the evidence for these benefits. We then discuss the challenges of implementing a fully digital pathology workflow, including the regulatory environment, validation of whole slide imaging and the evidence for the design of a digital pathology workstation. © 2016 John Wiley & Sons Ltd.

Balancing Expression and Structure in Game Design: Developing Computational Participation Using Studio-Based Design Pedagogy

ERIC Educational Resources Information Center

DeVane, Ben; Steward, Cody; Tran, Kelly M.

2016-01-01

This article reports on a project that used a game-creation tool to introduce middle-school students ages 10 to 13 to problem-solving strategies similar to those in computer science through the lens of studio-based design arts. Drawing on historic paradigms in design pedagogy and contemporary educational approaches in the digital arts to teach…

An engineering methodology for implementing and testing VLSI (Very Large Scale Integrated) circuits

NASA Astrophysics Data System (ADS)

Corliss, Walter F., II

1989-03-01

The engineering methodology for producing a fully tested VLSI chip from a design layout is presented. A 16-bit correlator, NPS CORN88, that was previously designed, was used as a vehicle to demonstrate this methodology. The study of the design and simulation tools, MAGIC and MOSSIM II, was the focus of the design and validation process. The design was then implemented and the chip was fabricated by MOSIS. This fabricated chip was then used to develop a testing methodology for using the digital test facilities at NPS. NPS CORN88 was the first full custom VLSI chip, designed at NPS, to be tested with the NPS digital analysis system, Tektronix DAS 9100 series tester. The capabilities and limitations of these test facilities are examined. NPS CORN88 test results are included to demonstrate the capabilities of the digital test system. A translator, MOS2DAS, was developed to convert the MOSSIM II simulation program to the input files required by the DAS 9100 device verification software, 91DVS. Finally, a tutorial for using the digital test facilities, including the DAS 9100 and associated support equipments, is included as an appendix.

[LONI & Co: about the epistemic specificity of digital spaces of knowledge in cognitive neuroscience].

PubMed

Huber, Lara

2011-06-01

In the neurosciences digital databases more and more are becoming important tools of data rendering and distributing. This development is due to the growing impact of imaging based trial design in cognitive neuroscience, including morphological as much as functional imaging technologies. As the case of the 'Laboratory of Neuro Imaging' (LONI) is showing, databases are attributed a specific epistemological power: Since the 1990s databasing is seen to foster the integration of neuroscientific data, although local regimes of data production, -manipulation and--interpretation are also challenging this development. Databasing in the neurosciences goes along with the introduction of new structures of integrating local data, hence establishing digital spaces of knowledge (epistemic spaces): At this stage, inherent norms of digital databases are affecting regimes of imaging-based trial design, for example clinical research into Alzheimer's disease.

Advanced power analysis methodology targeted to the optimization of a digital pixel readout chip design and its critical serial powering system

NASA Astrophysics Data System (ADS)

Marconi, S.; Orfanelli, S.; Karagounis, M.; Hemperek, T.; Christiansen, J.; Placidi, P.

2017-02-01

A dedicated power analysis methodology, based on modern digital design tools and integrated with the VEPIX53 simulation framework developed within RD53 collaboration, is being used to guide vital choices for the design and optimization of the next generation ATLAS and CMS pixel chips and their critical serial powering circuit (shunt-LDO). Power consumption is studied at different stages of the design flow under different operating conditions. Significant effort is put into extensive investigations of dynamic power variations in relation with the decoupling seen by the powering network. Shunt-LDO simulations are also reported to prove the reliability at the system level.

Optimizing digital elevation models (DEMs) accuracy for planning and design of mobile communication networks

NASA Astrophysics Data System (ADS)

Hassan, Mahmoud A.

2004-02-01

Digital elevation models (DEMs) are important tools in the planning, design and maintenance of mobile communication networks. This research paper proposes a method for generating high accuracy DEMs based on SPOT satellite 1A stereo pair images, ground control points (GCP) and Erdas OrthoBASE Pro image processing software. DEMs with 0.2911 m mean error were achieved for the hilly and heavily populated city of Amman. The generated DEM was used to design a mobile communication network resulted in a minimum number of radio base transceiver stations, maximum number of covered regions and less than 2% of dead zones.

A randomized controlled trial to evaluate utilization of physical activity recommendations among patients of cardiovascular healthcare centres in Eastern Slovakia: study design and rationale of the AWATAR study.

PubMed

Zelko, Aurel; Bukova, Alena; Kolarcik, Peter; Bakalar, Peter; Majercak, Ivan; Potocnikova, Jana; Reijneveld, Sijmen A; van Dijk, Jitse P

2018-04-04

Guidelines on modifiable risk factors regarding cardiological patients are poorly implemented in clinical practice perhaps due to low health literacy. Several digital tools for improving lifestyle and behavioural intervention were developed. Our primary aim is to evaluate the effectiveness of a digital exercise prescription tool on the adherence to physical activity recommendations among patients with cardiovascular diseases. A randomized controlled trial will be realized in cooperation with Cardiovascular Health Centres in Eastern Slovakia. Patients recruited through their cardiologists, will be randomised at 1:1 ratio to the three-months' experimental condition or control condition. The experimental group will receive standard lifestyle consultation leading to individually optimized prescription of physical activity. The control group will receive standard, usual-cardio-care lifestyle counselling, also in the domain of physical activity. The digital system will be used for optimized exercise prescription. The primary outcome is a change in the patient's adherence to exercise recommendations. Data will be collected in both groups prior to consultation and after 3 months. This study protocol presents background and design of a randomized control trial to investigate the effectiveness of a digital system-provide exercise prescription tool on the adherence to physical activity recommendations. An optimized exercise prescription that better reflects patient's diagnosis, comorbidities and medication can have a significant impact on secondary prevention of cardiovascular disease. This trial can provide important evidence about the effectiveness of digital exercise guidance in everyday practice of cardiovascular healthcare. The study was registered on 1st November, 2017 and is available online at ClinicalTrials.gov (ID: NCT03329053 ).

Model based design introduction: modeling game controllers to microprocessor architectures

NASA Astrophysics Data System (ADS)

Jungwirth, Patrick; Badawy, Abdel-Hameed

2017-04-01

We present an introduction to model based design. Model based design is a visual representation, generally a block diagram, to model and incrementally develop a complex system. Model based design is a commonly used design methodology for digital signal processing, control systems, and embedded systems. Model based design's philosophy is: to solve a problem - a step at a time. The approach can be compared to a series of steps to converge to a solution. A block diagram simulation tool allows a design to be simulated with real world measurement data. For example, if an analog control system is being upgraded to a digital control system, the analog sensor input signals can be recorded. The digital control algorithm can be simulated with the real world sensor data. The output from the simulated digital control system can then be compared to the old analog based control system. Model based design can compared to Agile software develop. The Agile software development goal is to develop working software in incremental steps. Progress is measured in completed and tested code units. Progress is measured in model based design by completed and tested blocks. We present a concept for a video game controller and then use model based design to iterate the design towards a working system. We will also describe a model based design effort to develop an OS Friendly Microprocessor Architecture based on the RISC-V.

An Integrated Unix-based CAD System for the Design and Testing of Custom VLSI Chips

NASA Technical Reports Server (NTRS)

Deutsch, L. J.

1985-01-01

A computer aided design (CAD) system that is being used at the Jet Propulsion Laboratory for the design of custom and semicustom very large scale integrated (VLSI) chips is described. The system consists of a Digital Equipment Corporation VAX computer with the UNIX operating system and a collection of software tools for the layout, simulation, and verification of microcircuits. Most of these tools were written by the academic community and are, therefore, available to JPL at little or no cost. Some small pieces of software have been written in-house in order to make all the tools interact with each other with a minimal amount of effort on the part of the designer.

Listening to Communities: Mixed-Method Study of the Engagement of Disadvantaged Mothers and Pregnant Women With Digital Health Technologies

PubMed Central

Broderick, Andrew; Mlo, Hmellisa; Gemmill, Alison; Lindeman, David

2017-01-01

Background US health care providers are increasingly demanding patient engagement with digital health technologies to enroll in care, access personal health information, communicate with providers, and monitor their own health. Such engagement may be difficult for disadvantaged populations who may have limited health literacy, time constraints, or competing priorities. Objective We aimed to understand the extent of adoption and use of digital health tools and to identify key perceived psychological motivators of technology use among disadvantaged first-time pregnant women and mothers of young children. Methods We recruited women from health organizations serving low-income communities in the Midwest and on the East and West coasts. A total of 92 women participated in 14 focus groups. During each session, we administered worksheets that measured 3 utilization outcomes: the number of recent Web-based health-seeking activities, current use of digital health-management practices (eg, accessing personal health information, communicating with providers, and scheduling appointments), and potential adoption of digital health-management tools among low users or nonusers. Responses to the worksheets and to a pre-focus group survey on demographics, technology access, and motivators of use were examined to create user profiles. Separate regression models identified the motivators (eHealth literacy, internal health orientation, and trust in digital information) associated with these outcomes. Qualitative data were incorporated to illustrate the worksheet responses. Results Whereas 97% of the participants reported that they had searched for health information on the Internet in the past year, 42% did not engage in digital health-management practices. Among the low users and nonusers, 49% expressed interest in future adoption of digital health tools. Web-based health information-seeking activities were associated with digital health-management practices (P<.001). When controlling for covariates, eHealth literacy was positively correlated with the number of Web-based health-seeking activities (beta=.03, 95% CI 0.00-0.07). However, an internal health orientation was a much stronger correlate of digital health-management practices (beta=.13, 95% CI 0.02-0.24), whereas trust in digital information increased the odds of potential adoption (vs no adoption) in adjusted models (OR 5.21, 95% CI 0.84-32.53). Demographic characteristics were not important drivers of digital health use and few differences distinguished use among mothers and pregnant women. Conclusions Seeking health information on the Internet may be an important gateway toward engaging in digital health-management practices. Notably, different consumer motivators influence digital health tool use. The relative contributions of each must be explored to design tools and interventions that enhance competencies for the management of self and child health among disadvantaged mothers and pregnant women. Unless we address disparities in digital health tool use, benefits from their use will accrue predominantly to individuals with the resources and skills to use technology effectively. PMID:28679489

Single Event Effects mitigation with TMRG tool

NASA Astrophysics Data System (ADS)

Kulis, S.

2017-01-01

Single Event Effects (SEE) are a major concern for integrated circuits exposed to radiation. There have been several techniques proposed to protect circuits against radiation-induced upsets. Among the others, the Triple Modular Redundancy (TMR) technique is one of the most popular. The purpose of the Triple Modular Redundancy Generator (TMRG) tool is to automatize the process of triplicating digital circuits freeing the designer from introducing the TMR code manually at the implementation stage. It helps to ensure that triplicated logic is maintained through the design process. Finally, the tool streamlines the process of introducing SEE in gate level simulations for final verification.

General-Purpose Electronic System Tests Aircraft

NASA Technical Reports Server (NTRS)

Glover, Richard D.

1989-01-01

Versatile digital equipment supports research, development, and maintenance. Extended aircraft interrogation and display system is general-purpose assembly of digital electronic equipment on ground for testing of digital electronic systems on advanced aircraft. Many advanced features, including multiple 16-bit microprocessors, pipeline data-flow architecture, advanced operating system, and resident software-development tools. Basic collection of software includes program for handling many types of data and for displays in various formats. User easily extends basic software library. Hardware and software interfaces to subsystems provided by user designed for flexibility in configuration to meet user's requirements.

Expanding Approaches for Understanding Impact: Integrating Technology, Curriculum, and Open Educational Resources in Science Education

ERIC Educational Resources Information Center

Ye, Lei; Recker, Mimi; Walker, Andrew; Leary, Heather; Yuan, Min

2015-01-01

This article reports results from a scale-up study of the impact of a software tool designed to support teachers in the digital learning era. This tool, the Curriculum Customization Service (CCS), enables teachers to access open educational resources from multiple providers, customize them for classroom instruction, and share them with other…

Research flight software engineering and MUST, an integrated system of support tools

NASA Technical Reports Server (NTRS)

Straeter, T. A.; Foudriat, E. C.; Will, R. W.

1977-01-01

Consideration is given to software development to support NASA flight research. The Multipurpose User-Oriented Software Technology (MUST) program, designed to integrate digital systems into flight research, is discussed. Particular attention is given to the program's special interactive user interface, subroutine library, assemblers, compiler, automatic documentation tools, and test and simulation subsystems.

Data Collection for Mental Health Studies Through Digital Platforms: Requirements and Design of a Prototype

PubMed Central

Triana Hoyos, Ana Maria; Alakörkkö, Tuomas; Kaski, Kimmo; Saramäki, Jari; Isometsä, Erkki; Darst, Richard K

2017-01-01

Background Mental and behavioral disorders are the main cause of disability worldwide. However, their diagnosis is challenging due to a lack of reliable biomarkers; current detection is based on structured clinical interviews which can be biased by the patient’s recall ability, affective state, changing in temporal frames, etc. While digital platforms have been introduced as a possible solution to this complex problem, there is little evidence on the extent of usability and usefulness of these platforms. Therefore, more studies where digital data is collected in larger scales are needed to collect scientific evidence on the capacities of these platforms. Most of the existing platforms for digital psychiatry studies are designed as monolithic systems for a certain type of study; publications from these studies focus on their results, rather than the design features of the data collection platform. Inevitably, more tools and platforms will emerge in the near future to fulfill the need for digital data collection for psychiatry. Currently little knowledge is available from existing digital platforms for future data collection platforms to build upon. Objective The objective of this work was to identify the most important features for designing a digital platform for data collection for mental health studies, and to demonstrate a prototype platform that we built based on these design features. Methods We worked closely in a multidisciplinary collaboration with psychiatrists, software developers, and data scientists and identified the key features which could guarantee short-term and long-term stability and usefulness of the platform from the designing stage to data collection and analysis of collected data. Results The key design features that we identified were flexibility of access control, flexibility of data sources, and first-order privacy protection. We also designed the prototype platform Non-Intrusive Individual Monitoring Architecture (Niima), where we implemented these key design features. We described why each of these features are important for digital data collection for psychiatry, gave examples of projects where Niima was used or is going to be used in the future, and demonstrated how incorporating these design principles opens new possibilities for studies. Conclusions The new methods of digital psychiatry are still immature and need further research. The design features we suggested are a first step to design platforms which can adapt to the upcoming requirements of digital psychiatry. PMID:28600276

Digital storytelling: a tool for health promotion and cancer awareness in rural Alaskan communities

PubMed Central

Cueva, Melany; Kuhnley, Regina; Revels, Laura; Schoenberg, Nancy E.; Dignan, Mark

2015-01-01

Background The purpose of this study was to learn community members’ perspectives about digital storytelling after viewing a digital story created by a Community Health Aide/Practitioner (CHA/P). Methods Using a qualitative research design, we explored digital storytelling likeability as a health-messaging tool, health information viewers reported learning and, if viewing, cancer-related digital stories facilitated increased comfort in talking about cancer. In addition, we enquired if the digital stories affected how viewers felt about cancer, as well as if viewing the digital stories resulted in health behaviour change or intent to change health behaviour. Findings A total of 15 adult community members participated in a 30–45 minute interview, 1–5 months post-viewing of a CHA/P digital story. The majority (13) of viewers interviewed were female, all were Alaska Native and they ranged in age from 25 to 54 years with the average age being 40 years. Due to the small size of communities, which ranged in population from 160 to 2,639 people, all viewers knew the story creator or knew of the story creator. Viewers reported digital stories as an acceptable, emotionally engaging way to increase their cancer awareness and begin conversations. These conversations often served as a springboard for reflection, insight, and cancer-prevention and risk-reduction activities. PMID:26343881

Finalizing the Dtag: implementation and testing of design improvements for reliability and availability

DTIC Science & Technology

2016-10-14

ABSTRACT DTAGs have proven to be a valuable tool for the study of marine mammal acoustics and fine scale motion. The success of the DTAG has resulted in...Underwater Acoustics , Digital Communications 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF a. REPORT b. ABSTRACT c. THIS PAGE ABSTRACT u u u...continuously monitor and improve the tag design.\\ OBJECTIVES Dtags have proven to be a valuable tool for the study of marine mammal acoustics and fine

New Design for Rapid Prototyping of Digital Master Casts for Multiple Dental Implant Restorations

PubMed Central

Romero, Luis; Jiménez, Mariano; Espinosa, María del Mar; Domínguez, Manuel

2015-01-01

Aim This study proposes the replacement of all the physical devices used in the manufacturing of conventional prostheses through the use of digital tools, such as 3D scanners, CAD design software, 3D implants files, rapid prototyping machines or reverse engineering software, in order to develop laboratory work models from which to finish coatings for dental prostheses. Different types of dental prosthetic structures are used, which were adjusted by a non-rotatory threaded fixing system. Method From a digital process, the relative positions of dental implants, soft tissue and adjacent teeth of edentulous or partially edentulous patients has been captured, and a maser working model which accurately replicates data relating to the patients oral cavity has been through treatment of three-dimensional digital data. Results Compared with the conventional master cast, the results show a significant cost savings in attachments, as well as an increase in the quality of reproduction and accuracy of the master cast, with the consequent reduction in the number of patient consultation visits. The combination of software and hardware three-dimensional tools allows the optimization of the planning of dental implant-supported rehabilitations protocol, improving the predictability of clinical treatments and the production cost savings of master casts for restorations upon implants. PMID:26696528

New Design for Rapid Prototyping of Digital Master Casts for Multiple Dental Implant Restorations.

PubMed

Romero, Luis; Jiménez, Mariano; Espinosa, María Del Mar; Domínguez, Manuel

2015-01-01

This study proposes the replacement of all the physical devices used in the manufacturing of conventional prostheses through the use of digital tools, such as 3D scanners, CAD design software, 3D implants files, rapid prototyping machines or reverse engineering software, in order to develop laboratory work models from which to finish coatings for dental prostheses. Different types of dental prosthetic structures are used, which were adjusted by a non-rotatory threaded fixing system. From a digital process, the relative positions of dental implants, soft tissue and adjacent teeth of edentulous or partially edentulous patients has been captured, and a maser working model which accurately replicates data relating to the patients oral cavity has been through treatment of three-dimensional digital data. Compared with the conventional master cast, the results show a significant cost savings in attachments, as well as an increase in the quality of reproduction and accuracy of the master cast, with the consequent reduction in the number of patient consultation visits. The combination of software and hardware three-dimensional tools allows the optimization of the planning of dental implant-supported rehabilitations protocol, improving the predictability of clinical treatments and the production cost savings of master casts for restorations upon implants.

NASA-LaRc Flight-Critical Digital Systems Technology Workshop

NASA Technical Reports Server (NTRS)

Meissner, C. W., Jr. (Editor); Dunham, J. R. (Editor); Crim, G. (Editor)

1989-01-01

The outcome is documented of a Flight-Critical Digital Systems Technology Workshop held at NASA-Langley December 13 to 15 1988. The purpose of the workshop was to elicit the aerospace industry's view of the issues which must be addressed for the practical realization of flight-critical digital systems. The workshop was divided into three parts: an overview session; three half-day meetings of seven working groups addressing aeronautical and space requirements, system design for validation, failure modes, system modeling, reliable software, and flight test; and a half-day summary of the research issues presented by the working group chairmen. Issues that generated the most consensus across the workshop were: (1) the lack of effective design and validation methods with support tools to enable engineering of highly-integrated, flight-critical digital systems, and (2) the lack of high quality laboratory and field data on system failures especially due to electromagnetic environment (EME).

Hand anthropometry survey of rural farm workers in south-eastern Nigeria.

PubMed

Obi, Okey Francis

2016-04-01

The importance of hand anthropometry as it relates to design of hand tools particularly for farm workers have been established; however, anthropometric data for this group of agricultural workers have continued to remain scarce. A survey of hand anthropometry relevant in design of agricultural hand tools was carried out on 200 male and 100 female adult farm workers in south-eastern Nigeria. Comparison of the male and female data obtained showed that male dimensions were higher than that recorded for the females. The hand anthropometric data of the male and female farm workers were compared with that of other populations but no clear distinction was observed. It was however clear that the following hand dimensions, 2nd Joint to root digit 3 and width at tip digit 3 recorded for Nigerian farm workers were highest and lowest, respectively, compared to other populations. Practitioner Summary: Hand anthropometric data relevant in design of hand tools have continued to remain scarce particularly for farm workers. Hand anthropometry survey of farm workers carried out in south-eastern Nigeria revealed higher dimensions for males than females; however, no clear distinction was observed in comparison with other populations.

A scalable, self-analyzing digital locking system for use on quantum optics experiments.

PubMed

Sparkes, B M; Chrzanowski, H M; Parrain, D P; Buchler, B C; Lam, P K; Symul, T

2011-07-01

Digital control of optics experiments has many advantages over analog control systems, specifically in terms of the scalability, cost, flexibility, and the integration of system information into one location. We present a digital control system, freely available for download online, specifically designed for quantum optics experiments that allows for automatic and sequential re-locking of optical components. We show how the inbuilt locking analysis tools, including a white-noise network analyzer, can be used to help optimize individual locks, and verify the long term stability of the digital system. Finally, we present an example of the benefits of digital locking for quantum optics by applying the code to a specific experiment used to characterize optical Schrödinger cat states.

Optics and optics-based technologies education with the benefit of LabVIEW

NASA Astrophysics Data System (ADS)

Wan, Yuhong; Man, Tianlong; Tao, Shiquan

2015-10-01

The details of design and implementation of incoherent digital holographic experiments based on LabVIEW are demonstrated in this work in order to offer a teaching modal by making full use of LabVIEW as an educational tool. Digital incoherent holography enables holograms to be recorded from incoherent light with just a digital camera and spatial light modulator and three-dimensional properties of the specimen are revealed after the hologram is reconstructed in the computer. The experiment of phase shifting incoherent digital holography is designed and implemented based on the principle of Fresnel incoherent correlation holography. An automatic control application is developed based on LabVIEW, which combines the functions of major experimental hardware control and digital reconstruction of the holograms. The basic functions of the system are completed and a user-friendly interface is provided for easy operation. The students are encouraged and stimulated to learn and practice the basic principle of incoherent digital holography and other related optics-based technologies during the programming of the application and implementation of the system.

WHOI and SIO (I): Next Steps toward Multi-Institution Archiving of Shipboard and Deep Submergence Vehicle Data

NASA Astrophysics Data System (ADS)

Detrick, R. S.; Clark, D.; Gaylord, A.; Goldsmith, R.; Helly, J.; Lemmond, P.; Lerner, S.; Maffei, A.; Miller, S. P.; Norton, C.; Walden, B.

2005-12-01

The Scripps Institution of Oceanography (SIO) and the Woods Hole Oceanographic Institution (WHOI) have joined forces with the San Diego Supercomputer Center to build a testbed for multi-institutional archiving of shipboard and deep submergence vehicle data. Support has been provided by the Digital Archiving and Preservation program funded by NSF/CISE and the Library of Congress. In addition to the more than 92,000 objects stored in the SIOExplorer Digital Library, the testbed will provide access to data, photographs, video images and documents from WHOI ships, Alvin submersible and Jason ROV dives, and deep-towed vehicle surveys. An interactive digital library interface will allow combinations of distributed collections to be browsed, metadata inspected, and objects displayed or selected for download. The digital library architecture, and the search and display tools of the SIOExplorer project, are being combined with WHOI tools, such as the Alvin Framegrabber and the Jason Virtual Control Van, that have been designed using WHOI's GeoBrowser to handle the vast volumes of digital video and camera data generated by Alvin, Jason and other deep submergence vehicles. Notions of scalability will be tested, as data volumes range from 3 CDs per cruise to 200 DVDs per cruise. Much of the scalability of this proposal comes from an ability to attach digital library data and metadata acquisition processes to diverse sensor systems. We are able to run an entire digital library from a laptop computer as well as from supercomputer-center-size resources. It can be used, in the field, laboratory or classroom, covering data from acquisition-to-archive using a single coherent methodology. The design is an open architecture, supporting applications through well-defined external interfaces maintained as an open-source effort for community inclusion and enhancement.

Software for biomedical engineering signal processing laboratory experiments.

PubMed

Tompkins, Willis J; Wilson, J

2009-01-01

In the early 1990's we developed a special computer program called UW DigiScope to provide a mechanism for anyone interested in biomedical digital signal processing to study the field without requiring any other instrument except a personal computer. There are many digital filtering and pattern recognition algorithms used in processing biomedical signals. In general, students have very limited opportunity to have hands-on access to the mechanisms of digital signal processing. In a typical course, the filters are designed non-interactively, which does not provide the student with significant understanding of the design constraints of such filters nor their actual performance characteristics. UW DigiScope 3.0 is the first major update since version 2.0 was released in 1994. This paper provides details on how the new version based on MATLAB! works with signals, including the filter design tool that is the programming interface between UW DigiScope and processing algorithms.

Adapting the buying funnel model of consumer behavior to the design of an online health research recruitment tool.

PubMed

Doshi, Aalap; Connally, Lisa; Spiroff, Meghan; Johnson, Anita; Mashour, George A

2017-08-01

UMHealthResearch is the University of Michigan's digital health research recruitment platform. It allows health researchers to connect efficiently with potentially eligible volunteers. In 2013, the UMHealthResearch team strategically adapted a consumer behavior model, the buying funnel, to create the Digital Health Research Participation Funnel. The Digital Health Research Participation Funnel was then used to design a more active way for potential participants to volunteer for research studies through UMHealthResearch. In the 5 years before the redesign (2007-2012), an average of 1844 new accounts were created every year, whereas in the completed years after the redesign (2013-2016) the annual average improved to 3906, an increase of 111%. Although a randomized design was not possible in this instance, these preintervention and postintervention data suggest that the focus on user experience is an effective strategy for improving web-based research recruitment platforms.

A Universal Design for Learning-Based Framework for Designing Accessible Technology-Enhanced Assessments. Research Report

ERIC Educational Resources Information Center

Dolan, Robert P.; Burling, Kelly; Harms, Michael; Strain-Seymour, Ellen; Way, Walter; Rose, David H.

2013-01-01

The increased capabilities offered by digital technologies offer new opportunities to evaluate students' deeper knowledge and skills and on constructs that are difficult to measure using traditional methods. Such assessments can also incorporate tools and interfaces that improve accessibility for diverse students, as well as inadvertently…

How to Avoid Getting Ripped Off by Ed-Tech Vendors: Ten Tips for School Districts from an Industry Insider

ERIC Educational Resources Information Center

Waldron, Rob

2018-01-01

Companies have developed a dizzying array of new software tools designed to do everything from assessing and monitoring students' progress to supporting a blended-learning environment to supplying entire curricula, complete with online activities and homework assignments. Educators seem to have developed a taste for these new digital tools,…

Digital Humanities: Envisioning a Collaborative Tool for Mapping, Evaluating, and Sharing Reconstructed Colonial American Parcel Maps

ERIC Educational Resources Information Center

Ruvane, Mary Brent

2012-01-01

The use of GIS technology for the humanities has opened up new avenues for visually exploring and asking questions of our nation's historical record. The potential to harness new knowledge with tools designed to capture and preserve geographic links to the artifacts of our past is within our grasp. This research explores the common information…

CALL in the Zone of Proximal Development: Novelty Effects and Teacher Guidance

ERIC Educational Resources Information Center

Karlström, Petter; Lundin, Eva

2013-01-01

Digital tools are not always used in the manner their designers had in mind. Therefore, it is not enough to assume that learning through CALL tools occurs in intended ways, if at all. We have studied the use of an enhanced word processor for writing essays in Swedish as a second language. The word processor contained natural language processing…

A new digitized reverse correction method for hypoid gears based on a one-dimensional probe

NASA Astrophysics Data System (ADS)

Li, Tianxing; Li, Jubo; Deng, Xiaozhong; Yang, Jianjun; Li, Genggeng; Ma, Wensuo

2017-12-01

In order to improve the tooth surface geometric accuracy and transmission quality of hypoid gears, a new digitized reverse correction method is proposed based on the measurement data from a one-dimensional probe. The minimization of tooth surface geometrical deviations is realized from the perspective of mathematical analysis and reverse engineering. Combining the analysis of complex tooth surface generation principles and the measurement mechanism of one-dimensional probes, the mathematical relationship between the theoretical designed tooth surface, the actual machined tooth surface and the deviation tooth surface is established, the mapping relation between machine-tool settings and tooth surface deviations is derived, and the essential connection between the accurate calculation of tooth surface deviations and the reverse correction method of machine-tool settings is revealed. Furthermore, a reverse correction model of machine-tool settings is built, a reverse correction strategy is planned, and the minimization of tooth surface deviations is achieved by means of the method of numerical iterative reverse solution. On this basis, a digitized reverse correction system for hypoid gears is developed by the organic combination of numerical control generation, accurate measurement, computer numerical processing, and digitized correction. Finally, the correctness and practicability of the digitized reverse correction method are proved through a reverse correction experiment. The experimental results show that the tooth surface geometric deviations meet the engineering requirements after two trial cuts and one correction.

Digital controllers for VTOL aircraft

NASA Technical Reports Server (NTRS)

Stengel, R. F.; Broussard, J. R.; Berry, P. W.

1976-01-01

Using linear-optimal estimation and control techniques, digital-adaptive control laws have been designed for a tandem-rotor helicopter which is equipped for fully automatic flight in terminal area operations. Two distinct discrete-time control laws are designed to interface with velocity-command and attitude-command guidance logic, and each incorporates proportional-integral compensation for non-zero-set-point regulation, as well as reduced-order Kalman filters for sensor blending and noise rejection. Adaptation to flight condition is achieved with a novel gain-scheduling method based on correlation and regression analysis. The linear-optimal design approach is found to be a valuable tool in the development of practical multivariable control laws for vehicles which evidence significant coupling and insufficient natural stability.

Youth Mental Health, Family Practice, and Knowledge Translation Video Games about Psychosis: Family Physicians' Perspectives.

PubMed

Ferrari, Manuela; Suzanne, Archie

2017-01-01

Family practitioners face many challenges providing mental healthcare to youth. Digital technology may offer solutions, but the products often need to be adapted for primary care. This study reports on family physicians' perspectives on the relevance and feasibility of a digital knowledge translation (KT) tool, a set of video games, designed to raise awareness about psychosis, marijuana use, and facilitate access to mental health services among youth. As part of an integrated knowledge translation project, five family physicians from a family health team participated in a focus group. The focus group delved into their perspectives on treating youth with mental health concerns while exploring their views on implementing the digital KT tool in their practice. Qualitative data was analyzed using thematic analysis to identify patterns, concepts, and themes in the transcripts. Three themes were identified: (a) challenges in assessing youth with mental health concerns related to training, time constraints, and navigating the system; (b) feedback on the KT tool; and, (c) ideas on how to integrate it into a primary care practice. Family practitioners felt that the proposed video game KT tool could be used to address youth's mental health and addictions issues in primary care settings.

Digital optical computers at the optoelectronic computing systems center

NASA Technical Reports Server (NTRS)

Jordan, Harry F.

1991-01-01

The Digital Optical Computing Program within the National Science Foundation Engineering Research Center for Opto-electronic Computing Systems has as its specific goal research on optical computing architectures suitable for use at the highest possible speeds. The program can be targeted toward exploiting the time domain because other programs in the Center are pursuing research on parallel optical systems, exploiting optical interconnection and optical devices and materials. Using a general purpose computing architecture as the focus, we are developing design techniques, tools and architecture for operation at the speed of light limit. Experimental work is being done with the somewhat low speed components currently available but with architectures which will scale up in speed as faster devices are developed. The design algorithms and tools developed for a general purpose, stored program computer are being applied to other systems such as optimally controlled optical communication networks.

Listening to Communities: Mixed-Method Study of the Engagement of Disadvantaged Mothers and Pregnant Women With Digital Health Technologies.

PubMed

Guendelman, Sylvia; Broderick, Andrew; Mlo, Hmellisa; Gemmill, Alison; Lindeman, David

2017-07-05

US health care providers are increasingly demanding patient engagement with digital health technologies to enroll in care, access personal health information, communicate with providers, and monitor their own health. Such engagement may be difficult for disadvantaged populations who may have limited health literacy, time constraints, or competing priorities. We aimed to understand the extent of adoption and use of digital health tools and to identify key perceived psychological motivators of technology use among disadvantaged first-time pregnant women and mothers of young children. We recruited women from health organizations serving low-income communities in the Midwest and on the East and West coasts. A total of 92 women participated in 14 focus groups. During each session, we administered worksheets that measured 3 utilization outcomes: the number of recent Web-based health-seeking activities, current use of digital health-management practices (eg, accessing personal health information, communicating with providers, and scheduling appointments), and potential adoption of digital health-management tools among low users or nonusers. Responses to the worksheets and to a pre-focus group survey on demographics, technology access, and motivators of use were examined to create user profiles. Separate regression models identified the motivators (eHealth literacy, internal health orientation, and trust in digital information) associated with these outcomes. Qualitative data were incorporated to illustrate the worksheet responses. Whereas 97% of the participants reported that they had searched for health information on the Internet in the past year, 42% did not engage in digital health-management practices. Among the low users and nonusers, 49% expressed interest in future adoption of digital health tools. Web-based health information-seeking activities were associated with digital health-management practices (P<.001). When controlling for covariates, eHealth literacy was positively correlated with the number of Web-based health-seeking activities (beta=.03, 95% CI 0.00-0.07). However, an internal health orientation was a much stronger correlate of digital health-management practices (beta=.13, 95% CI 0.02-0.24), whereas trust in digital information increased the odds of potential adoption (vs no adoption) in adjusted models (OR 5.21, 95% CI 0.84-32.53). Demographic characteristics were not important drivers of digital health use and few differences distinguished use among mothers and pregnant women. Seeking health information on the Internet may be an important gateway toward engaging in digital health-management practices. Notably, different consumer motivators influence digital health tool use. The relative contributions of each must be explored to design tools and interventions that enhance competencies for the management of self and child health among disadvantaged mothers and pregnant women. Unless we address disparities in digital health tool use, benefits from their use will accrue predominantly to individuals with the resources and skills to use technology effectively. ©Sylvia Guendelman, Andrew Broderick, Hmellisa Mlo, Alison Gemmill, David Lindeman. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 05.07.2017.

Quantitative Imaging In Pathology (QUIP) | Informatics Technology for Cancer Research (ITCR)

Cancer.gov

This site hosts web accessible applications, tools and data designed to support analysis, management, and exploration of whole slide tissue images for cancer research. The following tools are included: caMicroscope: A digital pathology data management and visualization plaform that enables interactive viewing of whole slide tissue images and segmentation results. caMicroscope can be also used independently of QUIP. FeatureExplorer: An interactive tool to allow patient-level feature exploration across multiple dimensions.

Modeling light

NASA Astrophysics Data System (ADS)

Dawson, P.; Gage, J.; Takatsuka, M.; Goyette, S.

2009-02-01

To compete with other digital images, holograms must go beyond the current range of source-image types, such as sequences of photographs, laser scans, and 3D computer graphics (CG) scenes made with software designed for other applications. This project develops a set of innovative techniques for creating 3D digital content specifically for digital holograms, with virtual tools which enable the direct hand-crafting of subjects, mark by mark, analogous to Michelangelo's practice in drawing, painting and sculpture. The haptic device, the Phantom Premium 1.5 is used to draw against three-dimensional laser- scan templates of Michelangelo's sculpture placed within the holographic viewing volume.

Methods in Astronomical Image Processing

NASA Astrophysics Data System (ADS)

Jörsäter, S.

A Brief Introductory Note History of Astronomical Imaging Astronomical Image Data Images in Various Formats Digitized Image Data Digital Image Data Philosophy of Astronomical Image Processing Properties of Digital Astronomical Images Human Image Processing Astronomical vs. Computer Science Image Processing Basic Tools of Astronomical Image Processing Display Applications Calibration of Intensity Scales Calibration of Length Scales Image Re-shaping Feature Enhancement Noise Suppression Noise and Error Analysis Image Processing Packages: Design of AIPS and MIDAS AIPS MIDAS Reduction of CCD Data Bias Subtraction Clipping Preflash Subtraction Dark Subtraction Flat Fielding Sky Subtraction Extinction Correction Deconvolution Methods Rebinning/Combining Summary and Prospects for the Future

Global GIS database; digital atlas of Central and South America

USGS Publications Warehouse

Hearn,, Paul P.; Hare, T.; Schruben, P.; Sherrill, D.; LaMar, C.; Tsushima, P.

2000-01-01

This CD-ROM contains a digital atlas of the countries of Central and South America. This atlas is part of a global database compiled from USGS and other data sources at the nominal scale of 1:1 million and is intended to be used as a regional-scale reference and analytical tool by government officials, researchers, the private sector, and the general public. The atlas includes free GIS software or may also be used with ESRI's ArcView software. Customized ArcView tools, specifically designed to make the atlas easier to use, are also included. The atlas contains the following datasets: country political boundaries, digital shaded relief map, elevation, slope, hydrology, locations of cities and towns, airfields, roads, railroads, utility lines, population density, geology, ecological regions, historical seismicity, volcanoes, ore deposits, oil and gas fields, climate data, landcover, vegetation index, and lights at night.

Graphical Environment Tools for Application to Gamma-Ray Energy Tracking Arrays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, Richard A.; Radford, David C.

2013-12-30

Highly segmented, position-sensitive germanium detector systems are being developed for nuclear physics research where traditional electronic signal processing with mixed analog and digital function blocks would be enormously complex and costly. Future systems will be constructed using pipelined processing of high-speed digitized signals as is done in the telecommunications industry. Techniques which provide rapid algorithm and system development for future systems are desirable. This project has used digital signal processing concepts and existing graphical system design tools to develop a set of re-usable modular functions and libraries targeted for the nuclear physics community. Researchers working with complex nuclear detector arraysmore » such as the Gamma-Ray Energy Tracking Array (GRETA) have been able to construct advanced data processing algorithms for implementation in field programmable gate arrays (FPGAs) through application of these library functions using intuitive graphical interfaces.« less

Modeling Post-Accident Vehicle Egress

DTIC Science & Technology

2013-01-01

interest for military situations may involve rolled-over vehicles for which detailed movement data are not available. In the current design process...test trials. These evaluations are expensive and time-consuming, and are often performed late in the design process when it is too difficult to...alter the design if weaknesses are discovered. Yet, due to the limitations of current software tools, digital human models (DHMs) are not yet widely

Data Collection for Mental Health Studies Through Digital Platforms: Requirements and Design of a Prototype.

PubMed

Aledavood, Talayeh; Triana Hoyos, Ana Maria; Alakörkkö, Tuomas; Kaski, Kimmo; Saramäki, Jari; Isometsä, Erkki; Darst, Richard K

2017-06-09

Mental and behavioral disorders are the main cause of disability worldwide. However, their diagnosis is challenging due to a lack of reliable biomarkers; current detection is based on structured clinical interviews which can be biased by the patient's recall ability, affective state, changing in temporal frames, etc. While digital platforms have been introduced as a possible solution to this complex problem, there is little evidence on the extent of usability and usefulness of these platforms. Therefore, more studies where digital data is collected in larger scales are needed to collect scientific evidence on the capacities of these platforms. Most of the existing platforms for digital psychiatry studies are designed as monolithic systems for a certain type of study; publications from these studies focus on their results, rather than the design features of the data collection platform. Inevitably, more tools and platforms will emerge in the near future to fulfill the need for digital data collection for psychiatry. Currently little knowledge is available from existing digital platforms for future data collection platforms to build upon. The objective of this work was to identify the most important features for designing a digital platform for data collection for mental health studies, and to demonstrate a prototype platform that we built based on these design features. We worked closely in a multidisciplinary collaboration with psychiatrists, software developers, and data scientists and identified the key features which could guarantee short-term and long-term stability and usefulness of the platform from the designing stage to data collection and analysis of collected data. The key design features that we identified were flexibility of access control, flexibility of data sources, and first-order privacy protection. We also designed the prototype platform Non-Intrusive Individual Monitoring Architecture (Niima), where we implemented these key design features. We described why each of these features are important for digital data collection for psychiatry, gave examples of projects where Niima was used or is going to be used in the future, and demonstrated how incorporating these design principles opens new possibilities for studies. The new methods of digital psychiatry are still immature and need further research. The design features we suggested are a first step to design platforms which can adapt to the upcoming requirements of digital psychiatry. ©Talayeh Aledavood, Ana Maria Triana Hoyos, Tuomas Alakörkkö, Kimmo Kaski, Jari Saramäki, Erkki Isometsä, Richard K Darst. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 09.06.2017.

The application of digital medical 3D printing technology on tumor operation

NASA Astrophysics Data System (ADS)

Chen, Jimin; Jiang, Yijian; Li, Yangsheng

2016-04-01

Digital medical 3D printing technology is a new hi-tech which combines traditional medical and digital design, computer science, bio technology and 3D print technology. At the present time there are four levels application: The printed 3D model is the first and simple application. The surgery makes use of the model to plan the processing before operation. The second is customized operation tools such as implant guide. It helps doctor to operate with special tools rather than the normal medical tools. The third level application of 3D printing in medical area is to print artificial bones or teeth to implant into human body. The big challenge is the fourth level which is to print organs with 3D printing technology. In this paper we introduced an application of 3D printing technology in tumor operation. We use 3D printing to print guide for invasion operation. Puncture needles were guided by printed guide in face tumors operation. It is concluded that this new type guide is dominantly advantageous.

Uses of Digital Tools and Literacies in the English Language Arts Classroom

ERIC Educational Resources Information Center

Beach, Richard

2012-01-01

This article reviews research on English language arts teachers' use of digital tools in the classroom to remediate print literacies. Specifically, this review focuses on the affordances of digital tools to foster uses of digital literacies of informational/accessibility, collaboration knowledge construction, multimodal communication, gaming…

Personal Digital Assistants as Point-of-Care Tools in Long-Term Care Facilities: A Pilot Study

ERIC Educational Resources Information Center

Qadri, Syeda S.; Wang, Jia; Ruiz, Jorge G.; Roos, Bernard A.

2009-01-01

This study used both survey and interview questionnaires. It was designed to assess the feasibility, usability, and utility of two point-of-care tools especially prepared with information relevant for dementia care by staff nurses in a small, a medium-sized, and a large nursing home in Florida. Twenty-five LPN or RN nurses were recruited for the…

Standard cell-based implementation of a digital optoelectronic neural-network hardware.

PubMed

Maier, K D; Beckstein, C; Blickhan, R; Erhard, W

2001-03-10

A standard cell-based implementation of a digital optoelectronic neural-network architecture is presented. The overall structure of the multilayer perceptron network that was used, the optoelectronic interconnection system between the layers, and all components required in each layer are defined. The design process from VHDL-based modeling from synthesis and partly automatic placing and routing to the final editing of one layer of the circuit of the multilayer perceptrons are described. A suitable approach for the standard cell-based design of optoelectronic systems is presented, and shortcomings of the design tool that was used are pointed out. The layout for the microelectronic circuit of one layer in a multilayer perceptron neural network with a performance potential 1 magnitude higher than neural networks that are purely electronic based has been successfully designed.

Comparison of different phantoms used in digital diagnostic imaging

NASA Astrophysics Data System (ADS)

Bor, Dogan; Unal, Elif; Uslu, Anil

2015-09-01

The organs of extremity, chest, skull and lumbar were physically simulated using uniform PMMA slabs with different thicknesses alone and using these slabs together with aluminum plates and air gaps (ANSI Phantoms). The variation of entrance surface air kerma and scatter fraction with X-ray beam qualities was investigated for these phantoms and the results were compared with those measured from anthropomorphic phantoms. A flat panel digital radiographic system was used for all the experiments. Considerable variations of entrance surface air kermas were found for the same organs of different designs, and highest doses were measured for the PMMA slabs. A low contrast test tool and a contrast detail test object (CDRAD) were used together with each organ simulation of PMMA slabs and ANSI phantoms in order to test the clinical image qualities. Digital images of these phantom combinations and anthropomorphic phantoms were acquired in raw and clinically processed formats. Variation of image quality with kVp and post processing was evaluated using the numerical metrics of these test tools and measured contrast values from the anthropomorphic phantoms. Our results indicated that design of some phantoms may not be efficient enough to reveal the expected performance of the post processing algorithms.

Learning algebra on screen and on paper: The effect of using a digital tool on students' understanding

NASA Astrophysics Data System (ADS)

Jupri, Al; Drijvers, Paul; van den Heuvel-Panhuizen, Marja

2016-02-01

The use of digital tools in algebra education is expected to not only contribute to master skill, but also to acquire conceptual understanding. The question is how digital tools affect students" thinking and understanding. This paper presents an analysis of data of one group of three grade seventh students (12-13 year-old) on the use of a digital tool for algebra, the Cover-up applet for solving equations in particular. This case study was part of a larger teaching experiment on initial algebra enriched with digital technology which aimed to improve students" conceptual understanding and skills in solving equations in one variable. The qualitative analysis of a video observation, digital and written work showed that the use of the applet affects student thinking in terms of strategies used by students while dealing with the equations. We conclude that the effects of the use of the digital tool can be traced from student problem solving strategies on paper-and-pencil environment which are similar to strategies while working with the digital tool. In future research, we recommend to use specific theoretical lenses, such as the theory of instrumental genesis and the onto-semiotic approach, to reveal more explicit relationships between students" conceptual understanding and the use of a digital tool.

Shaping electromagnetic waves using software-automatically-designed metasurfaces.

PubMed

Zhang, Qian; Wan, Xiang; Liu, Shuo; Yuan Yin, Jia; Zhang, Lei; Jun Cui, Tie

2017-06-15

We present a fully digital procedure of designing reflective coding metasurfaces to shape reflected electromagnetic waves. The design procedure is completely automatic, controlled by a personal computer. In details, the macro coding units of metasurface are automatically divided into several types (e.g. two types for 1-bit coding, four types for 2-bit coding, etc.), and each type of the macro coding units is formed by discretely random arrangement of micro coding units. By combining an optimization algorithm and commercial electromagnetic software, the digital patterns of the macro coding units are optimized to possess constant phase difference for the reflected waves. The apertures of the designed reflective metasurfaces are formed by arranging the macro coding units with certain coding sequence. To experimentally verify the performance, a coding metasurface is fabricated by automatically designing two digital 1-bit unit cells, which are arranged in array to constitute a periodic coding metasurface to generate the required four-beam radiations with specific directions. Two complicated functional metasurfaces with circularly- and elliptically-shaped radiation beams are realized by automatically designing 4-bit macro coding units, showing excellent performance of the automatic designs by software. The proposed method provides a smart tool to realize various functional devices and systems automatically.

Digital recording as a teaching and learning method in the skills laboratory.

PubMed

Strand, Ingebjørg; Gulbrandsen, Lise; Slettebø, Åshild; Nåden, Dagfinn

2017-09-01

To obtain information on how nursing students react to, think about and learn from digital recording as a learning and teaching method over time. Based on the teaching and learning philosophy of the university college, we used digital recording as a tool in our daily sessions in skills laboratory. However, most of the studies referred to in the background review had a duration of from only a few hours to a number of days. We found it valuable to design a study with a duration of two academic semesters. A descriptive and interpretative design was used. First-year bachelor-level students at the department of nursing participated in the study. Data collection was carried out by employing an 'online questionnaire'. The students answered five written, open-ended questions after each of three practical skill sessions. Kvale and Brinkmann's three levels of understanding were employed in the analysis. The students reported that digital recording affected factors such as feeling safe, secure and confident and that video recording was essential in learning and training practical skills. The use of cameras proved to be useful, as an expressive tool for peer learning because video recording enhances self-assessment, reflection, sensing, psychomotor performance and discovery learning. Digital recording enhances the student's awareness when acquiring new knowledge because it activates cognitive and emotional learning. The connection between tutoring, feedback and technology was clear. The digital recorder gives students direct and immediate feedback on their performance from the various practical procedures, and may aid in the transition from theory to practice. Students experienced more self-confidence and a feeling of safety in their performances. © 2016 John Wiley & Sons Ltd.

Highlighting the medical applications of 3D printing in Egypt

PubMed Central

Abdelghany, Khaled; Hamza, Hosamuddin

2015-01-01

Computer-assisted designing/computer-assisted manufacturing (CAD/CAM) technology has enabled medical practitioners to tailor physical models in a patient and purpose-specific fashion. It allows the designing and manufacturing of templates, appliances and devices with a high range of accuracy using biocompatible materials. The technique, nevertheless, relies on digital scanning (e.g., using intraoral scanners) and/or digital imaging (e.g., CT and MRI). In developing countries, there are some technical and financial limitations of implementing such advanced tools as an essential portion of medical applications. This paper focuses on the surgical and dental use of 3D printing technology in Egypt as a developing country. PMID:26807414

Developing an Application to Increase the Accessibility of Planetary Geologic Maps

NASA Astrophysics Data System (ADS)

Jacobsen, R. E.; Fay, C.

2018-06-01

USGS planetary geologic maps are widely used digital products with text, raster, vector, and temporal data, within a highly standardized design. This tool will augment the user experience by improving accessibility among the various forms of data.

Run-length encoding graphic rules, biochemically editable designs and steganographical numeric data embedment for DNA-based cryptographical coding system.

PubMed

Kawano, Tomonori

2013-03-01

There have been a wide variety of approaches for handling the pieces of DNA as the "unplugged" tools for digital information storage and processing, including a series of studies applied to the security-related area, such as DNA-based digital barcodes, water marks and cryptography. In the present article, novel designs of artificial genes as the media for storing the digitally compressed data for images are proposed for bio-computing purpose while natural genes principally encode for proteins. Furthermore, the proposed system allows cryptographical application of DNA through biochemically editable designs with capacity for steganographical numeric data embedment. As a model case of image-coding DNA technique application, numerically and biochemically combined protocols are employed for ciphering the given "passwords" and/or secret numbers using DNA sequences. The "passwords" of interest were decomposed into single letters and translated into the font image coded on the separate DNA chains with both the coding regions in which the images are encoded based on the novel run-length encoding rule, and the non-coding regions designed for biochemical editing and the remodeling processes revealing the hidden orientation of letters composing the original "passwords." The latter processes require the molecular biological tools for digestion and ligation of the fragmented DNA molecules targeting at the polymerase chain reaction-engineered termini of the chains. Lastly, additional protocols for steganographical overwriting of the numeric data of interests over the image-coding DNA are also discussed.

Airborne Advanced Reconfigurable Computer System (ARCS)

NASA Technical Reports Server (NTRS)

Bjurman, B. E.; Jenkins, G. M.; Masreliez, C. J.; Mcclellan, K. L.; Templeman, J. E.

1976-01-01

A digital computer subsystem fault-tolerant concept was defined, and the potential benefits and costs of such a subsystem were assessed when used as the central element of a new transport's flight control system. The derived advanced reconfigurable computer system (ARCS) is a triple-redundant computer subsystem that automatically reconfigures, under multiple fault conditions, from triplex to duplex to simplex operation, with redundancy recovery if the fault condition is transient. The study included criteria development covering factors at the aircraft's operation level that would influence the design of a fault-tolerant system for commercial airline use. A new reliability analysis tool was developed for evaluating redundant, fault-tolerant system availability and survivability; and a stringent digital system software design methodology was used to achieve design/implementation visibility.

Digital Clinical Communication for Families and Caregivers of Children or Young People With Short- or Long-Term Conditions: Rapid Review

PubMed Central

Armoiry, Xavier; Sturt, Jackie; Phelps, Emma Elizabeth; Walker, Clare-Louise; Court, Rachel; Taggart, Frances; Sutcliffe, Paul; Atherton, Helen

2018-01-01

Background The communication relationship between parents of children or young people with health conditions and health professionals is an important part of treatment, but it is unclear how far the use of digital clinical communication tools may affect this relationship. Objective The objective of our study was to describe, assess the feasibility of, and explore the impact of digital clinical communication between families or caregivers and health professionals. Methods We searched the literature using 5 electronic databases. We considered all types of study design published in the English language from January 2009 to August 2015. The population of interest included families and caregivers of children and young people aged less than 26 years with any type of health condition. The intervention was any technology permitting 2-way communication. Results We included 31 articles. The main designs were randomized controlled trials (RCTs; n=10), cross-sectional studies (n=9), pre- and postintervention uncontrolled (pre/post) studies (n=7), and qualitative interview studies (n=2); 6 had mixed-methods designs. In the majority of cases, we considered the quality rating to be fair. Many different types of health condition were represented. A breadth of digital communication tools were included: videoconferencing or videoconsultation (n=14), and Web messaging or emails (n=12). Health care professionals were mainly therapists or cognitive behavioral therapists (n=10), physicians (n=8), and nurses (n=6). Studies were very heterogeneous in terms of outcomes. Interventions were mainly evaluated using satisfaction or acceptance, or outcomes relating to feasibility. Clinical outcomes were rarely used. The RCTs showed that digital clinical communication had no impact in comparison with standard care. Uncontrolled pre/post studies showed good rates of satisfaction or acceptance. Some economic studies suggested that digital clinical communication may save costs. Conclusions This rapid review showed an emerging body of literature on the use of digital clinical communication to improve families’ and caregivers’ involvement in the health management of children or young people. Further research with appropriate study designs and longer-term outcome measures should be encouraged. Trial Registration PROSPERO CRD42016035467; http://www.crd.york.ac.uk/prospero/display_record.php?ID=CRD 42016 035467(Archived by WebCite at http://www.webcitation.org/6vpgZU1FU) PMID:29305339

The Virtual Naval Hospital: the digital library as knowledge management tool for nomadic patrons*

PubMed Central

D'Alessandro, Michael P.; D'Alessandro, Donna M.; Bakalar, Richard S.; Ashley, Denis E.; Hendrix, Mary J. C.

2005-01-01

Objective: To meet the information needs of isolated primary care providers and their patients in the US Navy, a digital health sciences library, the Virtual Naval Hospital, was created through a unique partnership between academia and government. Methods: The creation of the digital library was heavily influenced by the principles of user-centered design and made allowances for the nomadic nature of the digital library's patrons and the heterogeneous access they have to Internet bandwidth. Results: The result is a digital library that has been in operation since 1997, continues to expand in size, is heavily used, and is highly regarded by its patrons. Conclusions: The digital library is dedicated to delivering the right information at the right time to the right person so the right decision can be made, and therefore the Virtual Naval Hospital functions as a knowledge-management system for the US Navy Bureau of Medicine and Surgery. PMID:15685269

The Virtual Naval Hospital: the digital library as knowledge management tool for nomadic patrons.

PubMed

D'Alessandro, Michael P; D'Alessandro, Donna M; Bakalar, Richard S; Ashley, Denis E; Hendrix, Mary J C

2005-01-01

To meet the information needs of isolated primary care providers and their patients in the US Navy, a digital health sciences library, the Virtual Naval Hospital, was created through a unique partnership between academia and government. The creation of the digital library was heavily influenced by the principles of user-centered design and made allowances for the nomadic nature of the digital library's patrons and the heterogeneous access they have to Internet bandwidth. The result is a digital library that has been in operation since 1997, continues to expand in size, is heavily used, and is highly regarded by its patrons. The digital library is dedicated to delivering the right information at the right time to the right person so the right decision can be made, and therefore the Virtual Naval Hospital functions as a knowledge-management system for the US Navy Bureau of Medicine and Surgery.

Improving Synthetic Biology Communication: Recommended Practices for Visual Depiction and Digital Submission of Genetic Designs.

PubMed

Hillson, Nathan J; Plahar, Hector A; Beal, Jacob; Prithviraj, Ranjini

2016-06-17

Research is communicated more effectively and reproducibly when articles depict genetic designs consistently and fully disclose the complete sequences of all reported constructs. ACS Synthetic Biology is now providing authors with updated guidance and piloting a new tool and publication workflow that facilitate compliance with these recommended practices and standards for visual representation and data exchange.

The Impact of Cognitive Styles on Design Students' Spatial Knowledge from Virtual Environments

ERIC Educational Resources Information Center

Yildirm, Isil; Zengel, Rengin

2014-01-01

In parallel with the technological developments dominating usage of digital tools in science and education, caused the transform of knowledge in new ways. The reflection of these integration is seen in design discipline as its active role in this circle whether in practice or in the era of education, Benefit from the capabilities of new…

Youth Mental Health, Family Practice, and Knowledge Translation Video Games about Psychosis: Family Physicians’ Perspectives

PubMed Central

Ferrari, Manuela; Suzanne, Archie

2017-01-01

Objective Family practitioners face many challenges providing mental healthcare to youth. Digital technology may offer solutions, but the products often need to be adapted for primary care. This study reports on family physicians’ perspectives on the relevance and feasibility of a digital knowledge translation (KT) tool, a set of video games, designed to raise awareness about psychosis, marijuana use, and facilitate access to mental health services among youth. Method As part of an integrated knowledge translation project, five family physicians from a family health team participated in a focus group. The focus group delved into their perspectives on treating youth with mental health concerns while exploring their views on implementing the digital KT tool in their practice. Qualitative data was analyzed using thematic analysis to identify patterns, concepts, and themes in the transcripts. Results Three themes were identified: (a) challenges in assessing youth with mental health concerns related to training, time constraints, and navigating the system; (b) feedback on the KT tool; and, (c) ideas on how to integrate it into a primary care practice. Conclusions Family practitioners felt that the proposed video game KT tool could be used to address youth’s mental health and addictions issues in primary care settings. PMID:29056980

VLSI Design Tools, Reference Manual, Release 2.0.

DTIC Science & Technology

1984-08-01

eder. 2.3 ITACV: Libary ofC readne. far oesumdg a layoit 1-,, tiling. V ~2.4 "QUILT: CeinS"Wbesa-i-M-8euar ray f atwok til 2.5 "TIL: Tockmeleff...8217patterns package was added so that complex and repetitive digital waveforms could be generated far more easily. The recently written program MTP (Multiple...circuit model to estimate timing delays through digital circuits. It also has a mode that allows it to be used as a switch (gate) level simulator

CSM digital autopilot testing in support of ASTP experiments control requirements

NASA Technical Reports Server (NTRS)

Rue, D. L.

1975-01-01

Results are presented of CSM digital autopilot (DAP) testing. The testing was performed to demonstrate and evaluate control modes which are currently planned or could be considered for use in support of experiments on the ASTP mission. The testing was performed on the Lockheed Guidance, Navigation, and Control System Functional Simulator (GNCFS). This simulator, which was designed to test the Apollo and Skylab DAP control system, has been used extensively and is a proven tool for CSM DAP analysis.

Design of a MATLAB(registered trademark) Image Comparison and Analysis Tool for Augmentation of the Results of the Ann Arbor Distortion Test

DTIC Science & Technology

2016-06-25

The equipment used in this procedure includes: Ann Arbor distortion tester with 50-line grating reticule, IQeye 720 digital video camera with 12...and import them into MATLAB. In order to digitally capture images of the distortion in an optical sample, an IQeye 720 video camera with a 12... video camera and Ann Arbor distortion tester. Figure 8. Computer interface for capturing images seen by IQeye 720 camera. Once an image was

Evaluation of architectures for an ASP MPEG-4 decoder using a system-level design methodology

NASA Astrophysics Data System (ADS)

Garcia, Luz; Reyes, Victor; Barreto, Dacil; Marrero, Gustavo; Bautista, Tomas; Nunez, Antonio

2005-06-01

Trends in multimedia consumer electronics, digital video and audio, aim to reach users through low-cost mobile devices connected to data broadcasting networks with limited bandwidth. An emergent broadcasting network is the digital audio broadcasting network (DAB) which provides CD quality audio transmission together with robustness and efficiency techniques to allow good quality reception in motion conditions. This paper focuses on the system-level evaluation of different architectural options to allow low bandwidth digital video reception over DAB, based on video compression techniques. Profiling and design space exploration techniques are applied over the ASP MPEG-4 decoder in order to find out the best HW/SW partition given the application and platform constraints. An innovative SystemC-based system-level design tool, called CASSE, is being used for modelling, exploration and evaluation of different ASP MPEG-4 decoder HW/SW partitions. System-level trade offs and quantitative data derived from this analysis are also presented in this work.

A Design Study Investigating Augmented Reality and Photograph Annotation in a Digitalized Grossing Workstation

PubMed Central

Chow, Joyce A.; Törnros, Martin E.; Waltersson, Marie; Richard, Helen; Kusoffsky, Madeleine; Lundström, Claes F.; Kurti, Arianit

2017-01-01

Context: Within digital pathology, digitalization of the grossing procedure has been relatively underexplored in comparison to digitalization of pathology slides. Aims: Our investigation focuses on the interaction design of an augmented reality gross pathology workstation and refining the interface so that information and visualizations are easily recorded and displayed in a thoughtful view. Settings and Design: The work in this project occurred in two phases: the first phase focused on implementation of an augmented reality grossing workstation prototype while the second phase focused on the implementation of an incremental prototype in parallel with a deeper design study. Subjects and Methods: Our research institute focused on an experimental and “designerly” approach to create a digital gross pathology prototype as opposed to focusing on developing a system for immediate clinical deployment. Statistical Analysis Used: Evaluation has not been limited to user tests and interviews, but rather key insights were uncovered through design methods such as “rapid ethnography” and “conversation with materials”. Results: We developed an augmented reality enhanced digital grossing station prototype to assist pathology technicians in capturing data during examination. The prototype uses a magnetically tracked scalpel to annotate planned cuts and dimensions onto photographs taken of the work surface. This article focuses on the use of qualitative design methods to evaluate and refine the prototype. Our aims were to build on the strengths of the prototype's technology, improve the ergonomics of the digital/physical workstation by considering numerous alternative design directions, and to consider the effects of digitalization on personnel and the pathology diagnostics information flow from a wider perspective. A proposed interface design allows the pathology technician to place images in relation to its orientation, annotate directly on the image, and create linked information. Conclusions: The augmented reality magnetically tracked scalpel reduces tool switching though limitations in today's augmented reality technology fall short of creating an ideal immersive workflow by requiring the use of a monitor. While this technology catches up, we recommend focusing efforts on enabling the easy creation of layered, complex reports, linking, and viewing information across systems. Reflecting upon our results, we argue for digitalization to focus not only on how to record increasing amounts of data but also how these data can be accessed in a more thoughtful way that draws upon the expertise and creativity of pathology professionals using the systems. PMID:28966831

A Design Study Investigating Augmented Reality and Photograph Annotation in a Digitalized Grossing Workstation.

PubMed

Chow, Joyce A; Törnros, Martin E; Waltersson, Marie; Richard, Helen; Kusoffsky, Madeleine; Lundström, Claes F; Kurti, Arianit

2017-01-01

Within digital pathology, digitalization of the grossing procedure has been relatively underexplored in comparison to digitalization of pathology slides. Our investigation focuses on the interaction design of an augmented reality gross pathology workstation and refining the interface so that information and visualizations are easily recorded and displayed in a thoughtful view. The work in this project occurred in two phases: the first phase focused on implementation of an augmented reality grossing workstation prototype while the second phase focused on the implementation of an incremental prototype in parallel with a deeper design study. Our research institute focused on an experimental and "designerly" approach to create a digital gross pathology prototype as opposed to focusing on developing a system for immediate clinical deployment. Evaluation has not been limited to user tests and interviews, but rather key insights were uncovered through design methods such as " rapid ethnography " and " conversation with materials ". We developed an augmented reality enhanced digital grossing station prototype to assist pathology technicians in capturing data during examination. The prototype uses a magnetically tracked scalpel to annotate planned cuts and dimensions onto photographs taken of the work surface. This article focuses on the use of qualitative design methods to evaluate and refine the prototype. Our aims were to build on the strengths of the prototype's technology, improve the ergonomics of the digital/physical workstation by considering numerous alternative design directions, and to consider the effects of digitalization on personnel and the pathology diagnostics information flow from a wider perspective. A proposed interface design allows the pathology technician to place images in relation to its orientation, annotate directly on the image, and create linked information. The augmented reality magnetically tracked scalpel reduces tool switching though limitations in today's augmented reality technology fall short of creating an ideal immersive workflow by requiring the use of a monitor. While this technology catches up, we recommend focusing efforts on enabling the easy creation of layered, complex reports, linking, and viewing information across systems. Reflecting upon our results, we argue for digitalization to focus not only on how to record increasing amounts of data but also how these data can be accessed in a more thoughtful way that draws upon the expertise and creativity of pathology professionals using the systems.

Datasets2Tools, repository and search engine for bioinformatics datasets, tools and canned analyses

PubMed Central

Torre, Denis; Krawczuk, Patrycja; Jagodnik, Kathleen M.; Lachmann, Alexander; Wang, Zichen; Wang, Lily; Kuleshov, Maxim V.; Ma’ayan, Avi

2018-01-01

Biomedical data repositories such as the Gene Expression Omnibus (GEO) enable the search and discovery of relevant biomedical digital data objects. Similarly, resources such as OMICtools, index bioinformatics tools that can extract knowledge from these digital data objects. However, systematic access to pre-generated ‘canned’ analyses applied by bioinformatics tools to biomedical digital data objects is currently not available. Datasets2Tools is a repository indexing 31,473 canned bioinformatics analyses applied to 6,431 datasets. The Datasets2Tools repository also contains the indexing of 4,901 published bioinformatics software tools, and all the analyzed datasets. Datasets2Tools enables users to rapidly find datasets, tools, and canned analyses through an intuitive web interface, a Google Chrome extension, and an API. Furthermore, Datasets2Tools provides a platform for contributing canned analyses, datasets, and tools, as well as evaluating these digital objects according to their compliance with the findable, accessible, interoperable, and reusable (FAIR) principles. By incorporating community engagement, Datasets2Tools promotes sharing of digital resources to stimulate the extraction of knowledge from biomedical research data. Datasets2Tools is freely available from: http://amp.pharm.mssm.edu/datasets2tools. PMID:29485625

Datasets2Tools, repository and search engine for bioinformatics datasets, tools and canned analyses.

PubMed

Torre, Denis; Krawczuk, Patrycja; Jagodnik, Kathleen M; Lachmann, Alexander; Wang, Zichen; Wang, Lily; Kuleshov, Maxim V; Ma'ayan, Avi

2018-02-27

Biomedical data repositories such as the Gene Expression Omnibus (GEO) enable the search and discovery of relevant biomedical digital data objects. Similarly, resources such as OMICtools, index bioinformatics tools that can extract knowledge from these digital data objects. However, systematic access to pre-generated 'canned' analyses applied by bioinformatics tools to biomedical digital data objects is currently not available. Datasets2Tools is a repository indexing 31,473 canned bioinformatics analyses applied to 6,431 datasets. The Datasets2Tools repository also contains the indexing of 4,901 published bioinformatics software tools, and all the analyzed datasets. Datasets2Tools enables users to rapidly find datasets, tools, and canned analyses through an intuitive web interface, a Google Chrome extension, and an API. Furthermore, Datasets2Tools provides a platform for contributing canned analyses, datasets, and tools, as well as evaluating these digital objects according to their compliance with the findable, accessible, interoperable, and reusable (FAIR) principles. By incorporating community engagement, Datasets2Tools promotes sharing of digital resources to stimulate the extraction of knowledge from biomedical research data. Datasets2Tools is freely available from: http://amp.pharm.mssm.edu/datasets2tools.

Design and development of an interactive medical teleconsultation system over the World Wide Web.

PubMed

Bai, J; Zhang, Y; Dai, B

1998-06-01

The objective of the medical teleconsultation system presented in this paper is to demonstrate the use of the World Wide Web (WWW) for telemedicine and interactive medical information exchange. The system, which is developed based on Java, could provide several basic Java tools to fulfill the requirements of medical applications, including a file manager, data tool, bulletin board, and digital audio tool. The digital audio tool uses point-to-point structure to enable two physicians to communicate directly through voice. The others use multipoint structure. The file manager manages the medical images stored in the WWW information server, which come from a hospital database. The data tool supports cooperative operations on the medical data between the participating physicians. The bulletin board enables the users to discuss special cases by writing text on the board, send their personal or group diagnostic reports on the cases, and reorganize the reports and store them in its report file for later use. The system provides a hardware-independent platform for physicians to interact with one another as well as to access medical information over the WWW.

Innovation & evaluation of tangible direct manipulation digital drawing pens for children.

PubMed

Lee, Tai-Hua; Wu, Fong-Gong; Chen, Huei-Tsz

2017-04-01

Focusing on the theme of direct manipulation, in this study, we proposed a new and innovative tangible user interface (TUI) design concept for a manipulative digital drawing pen. Based on interviews with focus groups brainstorming and experts and the results of a field survey, we selected the most suitable tangible user interface for children between 4 and 7 years of age. Using the new tangible user interface, children could choose between the brush tools after touching and feeling the various patterns. The thickness of the brush could be adjusted by changing the tilt angle. In a subsequent experimental process we compared the differences in performance and subjective user satisfaction. A total of sixteen children, aged 4-7 years participated in the experiment. Two operating system experiments (the new designed tangible digital drawing pen and traditional visual interface-icon-clicking digital drawing pens) were performed at random and in turns. We assessed their manipulation performance, accuracy, brush stroke richness and subjective evaluations. During the experimental process we found that operating functions using the direct manipulation method, and adding shapes and semantic models to explain the purpose of each function, enabled the children to perform stroke switches relatively smoothly. By using direct manipulation digital pens, the children could improve their stroke-switching performance for digital drawing. Additionally, by using various patterns to represent different brushes or tools, the children were able to make selections using their sense of touch, thereby reducing the time required to move along the drawing pens and select icons (The significant differences (p = 0.000, p < 0.01) existed in the manipulation times for drawing thick lines using the crayon function of the two (new and old) drawing pens (new 5.8750 < old 10.7500)). The addition of direct manipulation movements to drawing operations enhanced the drawing results, thereby increasing the children's enjoyment of drawing with tangible digital drawing pens. Copyright © 2016 Elsevier Ltd. All rights reserved.

Ergonomics Perspective in Agricultural Research: A User-Centred Approach Using CAD and Digital Human Modeling (DHM) Technologies

NASA Astrophysics Data System (ADS)

Patel, Thaneswer; Sanjog, J.; Karmakar, Sougata

2016-09-01

Computer-aided Design (CAD) and Digital Human Modeling (DHM) (specialized CAD software for virtual human representation) technologies endow unique opportunities to incorporate human factors pro-actively in design development. Challenges of enhancing agricultural productivity through improvement of agricultural tools/machineries and better human-machine compatibility can be ensured by adoption of these modern technologies. Objectives of present work are to provide the detailed scenario of CAD and DHM applications in agricultural sector; and finding out means for wide adoption of these technologies for design and development of cost-effective, user-friendly, efficient and safe agricultural tools/equipment and operator's workplace. Extensive literature review has been conducted for systematic segregation and representation of available information towards drawing inferences. Although applications of various CAD software have momentum in agricultural research particularly for design and manufacturing of agricultural equipment/machinery, use of DHM is still at its infancy in this sector. Current review discusses about reasons of less adoption of these technologies in agricultural sector and steps to be taken for their wide adoption. It also suggests possible future research directions to come up with better ergonomic design strategies for improvement of agricultural equipment/machines and workstations through application of CAD and DHM.

Digital test assembly of truck parts with the IMMA-tool--an illustrative case.

PubMed

Hanson, L; Högberg, D; Söderholm, M

2012-01-01

Several digital human modelling (DHM) tools have been developed for simulation and visualisation of human postures and motions. In 2010 the DHM tool IMMA (Intelligently Moving Manikins) was introduced as a DHM tool that uses advanced path planning techniques to generate collision free and biomechanically acceptable motions for digital human models (as well as parts) in complex assembly situations. The aim of the paper is to illustrate how the IPS/IMMA tool is used at Scania CV AB in a digital test assembly process, and to compare the tool with other DHM tools on the market. The illustrated case of using the IMMA tool, here combined with the path planner tool IPS, indicates that the tool is promising. The major strengths of the tool are its user friendly interface, the motion generation algorithms, the batch simulation of manikins and the ergonomics assessment methods that consider time.

Digital prototyping technique applied for redesigning plastic products

NASA Astrophysics Data System (ADS)

Pop, A.; Andrei, A.

2015-11-01

After products are on the market for some time, they often need to be redesigned to meet new market requirements. New products are generally derived from similar but outdated products. Redesigning a product is an important part of the production and development process. The purpose of this paper is to show that using modern technology, like Digital Prototyping in industry is an effective way to produce new products. This paper tries to demonstrate and highlight the effectiveness of the concept of Digital Prototyping, both to reduce the design time of a new product, but also the costs required for implementing this step. The results of this paper show that using Digital Prototyping techniques in designing a new product from an existing one available on the market mould offers a significantly manufacturing time and cost reduction. The ability to simulate and test a new product with modern CAD-CAM programs in all aspects of production (designing of the 3D model, simulation of the structural resistance, analysis of the injection process and beautification) offers a helpful tool for engineers. The whole process can be realised by one skilled engineer very fast and effective.

Automated geo/ortho registered aerial imagery product generation using the mapping system interface card (MSIC)

NASA Astrophysics Data System (ADS)

Bratcher, Tim; Kroutil, Robert; Lanouette, André; Lewis, Paul E.; Miller, David; Shen, Sylvia; Thomas, Mark

2013-05-01

The development concept paper for the MSIC system was first introduced in August 2012 by these authors. This paper describes the final assembly, testing, and commercial availability of the Mapping System Interface Card (MSIC). The 2.3kg MSIC is a self-contained, compact variable configuration, low cost real-time precision metadata annotator with embedded INS/GPS designed specifically for use in small aircraft. The MSIC was specifically designed to convert commercial-off-the-shelf (COTS) digital cameras and imaging/non-imaging spectrometers with Camera Link standard data streams into mapping systems for airborne emergency response and scientific remote sensing applications. COTS digital cameras and imaging/non-imaging spectrometers covering the ultraviolet through long-wave infrared wavelengths are important tools now readily available and affordable for use by emergency responders and scientists. The MSIC will significantly enhance the capability of emergency responders and scientists by providing a direct transformation of these important COTS sensor tools into low-cost real-time aerial mapping systems.

Digital interactive learning of oral radiographic anatomy.

PubMed

Vuchkova, J; Maybury, T; Farah, C S

2012-02-01

Studies reporting high number of diagnostic errors made from radiographs suggest the need to improve the learning of radiographic interpretation in the dental curriculum. Given studies that show student preference for computer-assisted or digital technologies, the purpose of this study was to develop an interactive digital tool and to determine whether it was more successful than a conventional radiology textbook in assisting dental students with the learning of radiographic anatomy. Eighty-eight dental students underwent a learning phase of radiographic anatomy using an interactive digital tool alongside a conventional radiology textbook. The success of the digital tool, when compared to the textbook, was assessed by quantitative means using a radiographic interpretation test and by qualitative means using a structured Likert scale survey, asking students to evaluate their own learning outcomes from the digital tool. Student evaluations of the digital tool showed that almost all participants (95%) indicated that the tool positively enhanced their learning of radiographic anatomy and interpretation. The success of the digital tool in assisting the learning of radiographic interpretation is discussed in the broader context of learning and teaching curricula, and preference (by students) for the use of this digital form when compared to the conventional literate form of the textbook. Whilst traditional textbooks are still valued in the dental curriculum, it is evident that the preference for computer-assisted learning of oral radiographic anatomy enhances the learning experience by enabling students to interact and better engage with the course material. © 2011 John Wiley & Sons A/S.

DESIGN NOTE: A multiplying interferometer for 1.3 GHz using two Yagi antennas

NASA Astrophysics Data System (ADS)

Gallerani, A.; Minarelli, G.

2007-07-01

This note describes the small digital correlation interferometer, operating at 1.3 GHz, designed at the Istituto di Radioastronomia which is part of the National Institute for Astrophysics. It uses two Yagi Uda antennas to collect the radio-astronomical signal, which is converted to a base band of 0 4 MHz utilizing rf and digital blocks, in the same manner as a normal scientific radio telescope. The correlation of the two signals is performed in real time and a commercial PC is used to collect and visualize the fringe pattern. It is possible to detect the strongest radio sources such as the Sun, Cassiopeia A, Taurus and Cygnus A. The interferometer designed is simple, affordable and is suitable as a demonstration/teaching tool.

Tomato Expression Database (TED): a suite of data presentation and analysis tools

PubMed Central

Fei, Zhangjun; Tang, Xuemei; Alba, Rob; Giovannoni, James

2006-01-01

The Tomato Expression Database (TED) includes three integrated components. The Tomato Microarray Data Warehouse serves as a central repository for raw gene expression data derived from the public tomato cDNA microarray. In addition to expression data, TED stores experimental design and array information in compliance with the MIAME guidelines and provides web interfaces for researchers to retrieve data for their own analysis and use. The Tomato Microarray Expression Database contains normalized and processed microarray data for ten time points with nine pair-wise comparisons during fruit development and ripening in a normal tomato variety and nearly isogenic single gene mutants impacting fruit development and ripening. Finally, the Tomato Digital Expression Database contains raw and normalized digital expression (EST abundance) data derived from analysis of the complete public tomato EST collection containing >150 000 ESTs derived from 27 different non-normalized EST libraries. This last component also includes tools for the comparison of tomato and Arabidopsis digital expression data. A set of query interfaces and analysis, and visualization tools have been developed and incorporated into TED, which aid users in identifying and deciphering biologically important information from our datasets. TED can be accessed at . PMID:16381976

Tomato Expression Database (TED): a suite of data presentation and analysis tools.

PubMed

Fei, Zhangjun; Tang, Xuemei; Alba, Rob; Giovannoni, James

2006-01-01

The Tomato Expression Database (TED) includes three integrated components. The Tomato Microarray Data Warehouse serves as a central repository for raw gene expression data derived from the public tomato cDNA microarray. In addition to expression data, TED stores experimental design and array information in compliance with the MIAME guidelines and provides web interfaces for researchers to retrieve data for their own analysis and use. The Tomato Microarray Expression Database contains normalized and processed microarray data for ten time points with nine pair-wise comparisons during fruit development and ripening in a normal tomato variety and nearly isogenic single gene mutants impacting fruit development and ripening. Finally, the Tomato Digital Expression Database contains raw and normalized digital expression (EST abundance) data derived from analysis of the complete public tomato EST collection containing >150,000 ESTs derived from 27 different non-normalized EST libraries. This last component also includes tools for the comparison of tomato and Arabidopsis digital expression data. A set of query interfaces and analysis, and visualization tools have been developed and incorporated into TED, which aid users in identifying and deciphering biologically important information from our datasets. TED can be accessed at http://ted.bti.cornell.edu.

GeNeDA: An Open-Source Workflow for Design Automation of Gene Regulatory Networks Inspired from Microelectronics.

PubMed

Madec, Morgan; Pecheux, François; Gendrault, Yves; Rosati, Elise; Lallement, Christophe; Haiech, Jacques

2016-10-01

The topic of this article is the development of an open-source automated design framework for synthetic biology, specifically for the design of artificial gene regulatory networks based on a digital approach. In opposition to other tools, GeNeDA is an open-source online software based on existing tools used in microelectronics that have proven their efficiency over the last 30 years. The complete framework is composed of a computation core directly adapted from an Electronic Design Automation tool, input and output interfaces, a library of elementary parts that can be achieved with gene regulatory networks, and an interface with an electrical circuit simulator. Each of these modules is an extension of microelectronics tools and concepts: ODIN II, ABC, the Verilog language, SPICE simulator, and SystemC-AMS. GeNeDA is first validated on a benchmark of several combinatorial circuits. The results highlight the importance of the part library. Then, this framework is used for the design of a sequential circuit including a biological state machine.

eLearning and eMaking: 3D Printing Blurring the Digital and the Physical

ERIC Educational Resources Information Center

Loy, Jennifer

2014-01-01

This article considers the potential of 3D printing as an eLearning tool for design education and the role of eMaking in bringing together the virtual and the physical in the design studio. eLearning has matured from the basics of lecture capture into sophisticated, interactive learning activities for students. At the same time, laptops and…

A Conceptual Framework for Emergent Digital Literacy

ERIC Educational Resources Information Center

Neumann, Michelle M.; Finger, Glenn; Neumann, David L.

2017-01-01

As we progress in the 21st century, children learn to become proficient readers and writers of both digital and non-digital texts. Knowledge, skills, and understandings of literacy emerge through sociocultural interactions with non-digital tools (e.g., paper-printed books) and digital tools (e.g., touch screen tablets). However, debate is ongoing…

The DigiLit Framework

ERIC Educational Resources Information Center

Baxa, Julie; Christ, Tanya

2018-01-01

Selecting and integrating the use of digital texts/tools in literacy lessons are complex tasks. The DigiLit framework provides a succinct model to guide planning, reflection, coaching, and formative evaluation of teachers' successful digital text/tool selection and integration for literacy lessons. For digital text/tool selection, teachers need to…

Construction of a Distributed-network Digital Watershed Management System with B/S Techniques

NASA Astrophysics Data System (ADS)

Zhang, W. C.; Liu, Y. M.; Fang, J.

2017-07-01

Integrated watershed assessment tools for supporting land management and hydrologic research are becoming established tools in both basic and applied research. The core of these tools are mainly spatially distributed hydrologic models as they can provide a mechanism for investigating interactions among climate, topography, vegetation, and soil. However, the extensive data requirements and the difficult task of building input parameter files for driving these distributed models, have long been an obstacle to the timely and cost-effective use of such complex models by watershed managers and policy-makers. Recently, a web based geographic information system (GIS) tool to facilitate this process has been developed for a large watersheds of Jinghe and Weihe catchments located in the loess plateau of the Huanghe River basin in north-western China. A web-based GIS provides the framework within which spatially distributed data are collected and used to prepare model input files of these two watersheds and evaluate model results as well as to provide the various clients for watershed information inquiring, visualizing and assessment analysis. This Web-based Automated Geospatial Watershed Assessment GIS (WAGWA-GIS) tool uses widely available standardized spatial datasets that can be obtained via the internet oracle databank designed with association of Map Guide platform to develop input parameter files for online simulation at different spatial and temporal scales with Xing’anjiang and TOPMODEL that integrated with web-based digital watershed. WAGWA-GIS automates the process of transforming both digital data including remote sensing data, DEM, Land use/cover, soil digital maps and meteorological and hydrological station geo-location digital maps and text files containing meteorological and hydrological data obtained from stations of the watershed into hydrological models for online simulation and geo-spatial analysis and provides a visualization tool to help the user interpret results. The utility of WAGWA-GIS in jointing hydrologic and ecological investigations has been demonstrated on such diverse landscapes as Jinhe and Weihe watersheds, and will be extended to be utilized in the other watersheds in China step by step in coming years

Expanding the KATE toolbox

NASA Technical Reports Server (NTRS)

Thomas, Stan J.

1993-01-01

KATE (Knowledge-based Autonomous Test Engineer) is a model-based software system developed in the Artificial Intelligence Laboratory at the Kennedy Space Center for monitoring, fault detection, and control of launch vehicles and ground support systems. In order to bring KATE to the level of performance, functionality, and integratability needed for firing room applications, efforts are underway to implement KATE in the C++ programming language using an X-windows interface. Two programs which were designed and added to the collection of tools which comprise the KATE toolbox are described. The first tool, called the schematic viewer, gives the KATE user the capability to view digitized schematic drawings in the KATE environment. The second tool, called the model editor, gives the KATE model builder a tool for creating and editing knowledge base files. Design and implementation issues having to do with these two tools are discussed. It will be useful to anyone maintaining or extending either the schematic viewer or the model editor.

Run-length encoding graphic rules, biochemically editable designs and steganographical numeric data embedment for DNA-based cryptographical coding system

PubMed Central

Kawano, Tomonori

2013-01-01

There have been a wide variety of approaches for handling the pieces of DNA as the “unplugged” tools for digital information storage and processing, including a series of studies applied to the security-related area, such as DNA-based digital barcodes, water marks and cryptography. In the present article, novel designs of artificial genes as the media for storing the digitally compressed data for images are proposed for bio-computing purpose while natural genes principally encode for proteins. Furthermore, the proposed system allows cryptographical application of DNA through biochemically editable designs with capacity for steganographical numeric data embedment. As a model case of image-coding DNA technique application, numerically and biochemically combined protocols are employed for ciphering the given “passwords” and/or secret numbers using DNA sequences. The “passwords” of interest were decomposed into single letters and translated into the font image coded on the separate DNA chains with both the coding regions in which the images are encoded based on the novel run-length encoding rule, and the non-coding regions designed for biochemical editing and the remodeling processes revealing the hidden orientation of letters composing the original “passwords.” The latter processes require the molecular biological tools for digestion and ligation of the fragmented DNA molecules targeting at the polymerase chain reaction-engineered termini of the chains. Lastly, additional protocols for steganographical overwriting of the numeric data of interests over the image-coding DNA are also discussed. PMID:23750303

Comparative hybrid and digital simulation studies of the behaviour of a wind generator equipped with a static frequency converter

NASA Astrophysics Data System (ADS)

Dube, B.; Lefebvre, S.; Perocheau, A.; Nakra, H. L.

1988-01-01

This paper describes the comparative results obtained from digital and hybrid simulation studies on a variable speed wind generator interconnected to the utility grid. The wind generator is a vertical-axis Darrieus type coupled to a synchronous machine by a gear-box; the synchronous machine is connected to the AC utility grid through a static frequency converter. Digital simulation results have been obtained using CSMP software; these results are compared with those obtained from a real-time hybrid simulator that in turn uses a part of the IREQ HVDC simulator. The agreement between hybrid and digital simulation results is generally good. The results demonstrate that the digital simulation reproduces the dynamic behavior of the system in a satisfactory manner and thus constitutes a valid tool for the design of the control systems of the wind generator.

Making Publics: Mobilizing Audiences in High School Makerspaces

ERIC Educational Resources Information Center

Stornaiuolo, Amy; Nichols, T. Philip

2018-01-01

Background/Context: Researchers, policy makers, and practitioners are paying increasing attention to the educational opportunities afforded by the maker movement--a growing public interested in do-it-yourself designing, remixing, and tinkering using physical and digital tools. While education research on "making" has often focused on…

Digital Portfolios: Powerful Marketing Tool for Communications Students

ERIC Educational Resources Information Center

Nikirk, Martin

2008-01-01

A digital portfolio is a powerful marketing tool for young people searching for employment in the communication or interactive media fields. With a digital portfolio, students can demonstrate their skills at working with software tools, demonstrate appropriate use of materials, explain technical procedures, show an understanding of processes and…

Using Behavioral Intervention Technologies to Help Low-Income and Latino Smokers Quit: Protocol of a Randomized Controlled Trial

PubMed Central

Bunge, Eduardo L; Barrera, Alinne Z; Wickham, Robert E; Lee, Jessica

2016-01-01

Background The Institute for International Internet Interventions for Health at Palo Alto University proposes to develop digital tools specifically to help low-income English- and Spanish-speaking smokers to quit. Individuals from lower-income countries and those with lower social status quit at lower rates than those from high-income countries and those with higher social status. Objective We plan to launch a project designed to test whether a mobile-based digital intervention designed with systematic input from low-income English- and Spanish-speaking smokers from a public-sector health care system can significantly improve its acceptability, utilization, and effectiveness. Methods Using human-centered development methods, we will involve low-income patients in the design of a Web app/text messaging tool. We will also use their input to improve our recruitment and dissemination strategies. We will iteratively develop versions of the digital interventions informed by our human-centered approach. The project involves three specific aims: (1) human-centered development of an English/Spanish smoking cessation web app, (2) improvement of dissemination strategies, and (3) evaluation of resulting smoking cessation web app. We will develop iterative versions of a digital smoking cessation tool that is highly responsive to the needs and preferences of the users. Input from participants will identify effective ways of reaching and encouraging low-income English- and Spanish-speaking smokers to use the digital smoking cessation interventions to be developed. This information will support ongoing dissemination and implementation efforts beyond the grant period. We will evaluate the effectiveness of the successive versions of the resulting stop smoking Web app by an online randomized controlled trial. Increased effectiveness will be defined as increased utilization of the Web app and higher abstinence rates than those obtained by a baseline usual care Web app. Results Recruitment will begin January 2016, the study is intended to be completed by summer 2018, and the results should be available by fall 2019. Conclusions This study will provide useful knowledge in developing, testing, and disseminating mobile-based interventions for low-income smokers. ClinicalTrial ClinicalTrials.gov NCT02666482; https://clinicaltrials.gov/ct2/show/NCT02666482 (Archived by WebCite at http://www.webcitation.org/6gtcwaT28) PMID:27302623

Questioning and metacognitive thinking: On-line and off-line assessments in understanding the role of prompting/questioning and metacognitive thinking in a digital learning environment

NASA Astrophysics Data System (ADS)

Schroeder, Mubina Khan

In science education, the use of digital technology-based learning can help students struggling with difficult concepts such as the movement of molecules. While digital learning tools hold much promise for science education, the question arises as to whether or not such technology can serve as an adequate surrogate for the teacher-student interactions that theorists like Lev Vygotsky (1978) underscored as being critical to learning. In response to such concerns, designers of digital curricula often utilize scaffolds to help students as they learn from such programs. Using a simulation designed to teach students about the concept of diffusion as an example, I examine the effect of including prompting language in the learning sequence of the simulation. The use of prompting language in digital curriculum appears to be successful because it elicits science students to reflect and metacognise about their learning, lending support to Vygotsky's (1978) ideas of teaching and learning involving outer and inner dialog. However, findings from think aloud data continue to underscore the importance of human linguistic exchange as a preferable learning paradigm.

Grid-supported Medical Digital Library.

PubMed

Kosiedowski, Michal; Mazurek, Cezary; Stroinski, Maciej; Weglarz, Jan

2007-01-01

Secure, flexible and efficient storing and accessing digital medical data is one of the key elements for delivering successful telemedical systems. To this end grid technologies designed and developed over the recent years and grid infrastructures deployed with their use seem to provide an excellent opportunity for the creation of a powerful environment capable of delivering tools and services for medical data storage, access and processing. In this paper we present the early results of our work towards establishing a Medical Digital Library supported by grid technologies and discuss future directions of its development. These works are part of the "Telemedycyna Wielkopolska" project aiming to develop a telemedical system for the support of the regional healthcare.

The Need for (Digital) Story: First Graders Using Digital Tools to Tell Stories

ERIC Educational Resources Information Center

Solomon, Marva Jeanine

2010-01-01

The purpose of this study was to explore the process and product of African American First Graders as they participated in digital storytelling. Of interest was the role digital tools played in the creation process. Eight participants participated in 18 study sessions during which they composed, recorded, and then shared their digital texts with…

Validation of the CALSPAN gross-motion-simulation code with actually occurring injury patterns in aircraft accidents.

PubMed

Ballo, J M; Dunne, M J; McMeekin, R R

1978-01-01

Digital simulation of aircraft-accident kinematics has heretofore been used almost exclusively as a design tool to explore structural load limits, precalculate decelerative forces at various cabin stations, and describe the effect of protective devices in the crash environment. In an effort to determine the value of digital computer simulation of fatal aircraft accidents, a fatality involving an ejection-system failure (out-of-envelope ejection) was modeled, and the injuries actually incurred were compared to those predicted; good agreement was found. The simulation of fatal aircraft accidents is advantageous because of a well-defined endpoint (death), lack of therapeutic intervention, and a static anatomic situation that can be minutely investigated. Such simulation techniques are a useful tool in the study of experimental trauma.

Adolescent asthma self-management: patient and parent-caregiver perspectives on using social media to improve care.

PubMed

Panzera, Anthony D; Schneider, Tali K; Martinasek, Mary P; Lindenberger, James H; Couluris, Marisa; Bryant, Carol A; McDermott, Robert J

2013-12-01

Self-management of asthma can now leverage new media technologies. To optimize implementation they must employ a consumer-oriented developmental approach. This study explored benefits of and barriers to improved asthma self-management and identified key elements for the development of a digital media tool to enhance asthma control. Between August 2010 and January 2011, 18 teens with asthma and 18 parent-caregivers participated in semistructured in-depth interviews to identify mechanisms for improving asthma self-management and propose characteristics for developing a digital media tool to aid such efforts. Teens and caregivers enumerated physician-recommended strategies for asthma management as well as currently employed strategies. Both groups thought of a potential digital media solution as positive, but indicated specific design requirements for such a solution to have utility. Whereas most participants perceived mobile platforms to be viable modes to improve asthma self-management, interest in having social networking capabilities was mixed. A digital media product capable of tracking conditions, triggers, and related asthma activities can be a core element of improved asthma control for youth. Improved asthma control will help decrease school absenteeism. © 2013, American School Health Association.

Digital Advocacy Stories: A Pedagogical Tool for Communicating and Strengthening Library Values

ERIC Educational Resources Information Center

Moreillon, Judi; Hall, Ruth Nicole

2014-01-01

"Digital Advocacy Stories: A Pedagogical Tool for Communicating and Strengthening Library Values" is a case study conducted in LS5633: The Art of Storytelling. The purpose of this study was to investigate graduate student candidates' development of library values through the use of digital tools to create and disseminate advocacy…

You're Distracted. This Professor Can Help

ERIC Educational Resources Information Center

Parry, Marc

2013-01-01

The e-mail drill was one of numerous mind-training exercises in a unique class designed to raise students' awareness about how they use their digital tools. Colleges have experimented with short-term social-media blackouts in the past. But Ms. Hill's course, "Information and Contemplation," goes way further. Participants scrutinize their…

Teaching Mathematics for Spatial Justice: An Investigation of the Lottery

ERIC Educational Resources Information Center

Rubel, Laurie H.; Lim, Vivian Y.; Hall-Wieckert, Maren; Sullivan, Mathew

2016-01-01

This article explores integrating place-based education with critical mathematics toward teaching mathematics for spatial justice. "Local Lotto," a curricular module with associated digital tools, was designed to investigate the lottery as a critical spatial phenomenon and piloted in urban high schools. This article describes findings…

Building a Shared Virtual Learning Culture: An International Classroom Partnership

ERIC Educational Resources Information Center

Starke-Meyerring, Doreen; Andrews, Deborah

2006-01-01

Business professionals increasingly use digital tools to collaborate across multiple cultures, locations, and time zones. Success in this complex environment depends on a shared culture that facilitates the making of knowledge and the best contributions of all team members. To prepare managers for such communication, the authors designed and…

Augmenting Literacy: The Role of Expertise in Digital Writing

ERIC Educational Resources Information Center

Van Ittersum, Derek

2011-01-01

This essay presents a model of reflective use of writing technologies, one that provides a means of more fully exploiting the possibilities of these tools for transforming writing activity. Derived from the work of computer designer Douglas Engelbart, the "bootstrapping" model of reflective use extends current arguments in the field…

You Tube as a Learning Tool

ERIC Educational Resources Information Center

Fralinger, Barbara; Owens, Russell

2009-01-01

This paper expands upon previous research conducted on the effectiveness of implementing Microsoft MovieMaker (a digital video editing program) into the classroom. Sixty-one graduate and twenty undergraduate students from King's College and Rowan University took part in this study. Using the MovieMaker software to design student created tutorials…

Parallel Processing with Digital Signal Processing Hardware and Software

NASA Technical Reports Server (NTRS)

Swenson, Cory V.

1995-01-01

The assembling and testing of a parallel processing system is described which will allow a user to move a Digital Signal Processing (DSP) application from the design stage to the execution/analysis stage through the use of several software tools and hardware devices. The system will be used to demonstrate the feasibility of the Algorithm To Architecture Mapping Model (ATAMM) dataflow paradigm for static multiprocessor solutions of DSP applications. The individual components comprising the system are described followed by the installation procedure, research topics, and initial program development.

Digital Clinical Communication for Families and Caregivers of Children or Young People With Short- or Long-Term Conditions: Rapid Review.

PubMed

Armoiry, Xavier; Sturt, Jackie; Phelps, Emma Elizabeth; Walker, Clare-Louise; Court, Rachel; Taggart, Frances; Sutcliffe, Paul; Griffiths, Frances; Atherton, Helen

2018-01-05

The communication relationship between parents of children or young people with health conditions and health professionals is an important part of treatment, but it is unclear how far the use of digital clinical communication tools may affect this relationship. The objective of our study was to describe, assess the feasibility of, and explore the impact of digital clinical communication between families or caregivers and health professionals. We searched the literature using 5 electronic databases. We considered all types of study design published in the English language from January 2009 to August 2015. The population of interest included families and caregivers of children and young people aged less than 26 years with any type of health condition. The intervention was any technology permitting 2-way communication. We included 31 articles. The main designs were randomized controlled trials (RCTs; n=10), cross-sectional studies (n=9), pre- and postintervention uncontrolled (pre/post) studies (n=7), and qualitative interview studies (n=2); 6 had mixed-methods designs. In the majority of cases, we considered the quality rating to be fair. Many different types of health condition were represented. A breadth of digital communication tools were included: videoconferencing or videoconsultation (n=14), and Web messaging or emails (n=12). Health care professionals were mainly therapists or cognitive behavioral therapists (n=10), physicians (n=8), and nurses (n=6). Studies were very heterogeneous in terms of outcomes. Interventions were mainly evaluated using satisfaction or acceptance, or outcomes relating to feasibility. Clinical outcomes were rarely used. The RCTs showed that digital clinical communication had no impact in comparison with standard care. Uncontrolled pre/post studies showed good rates of satisfaction or acceptance. Some economic studies suggested that digital clinical communication may save costs. This rapid review showed an emerging body of literature on the use of digital clinical communication to improve families' and caregivers' involvement in the health management of children or young people. Further research with appropriate study designs and longer-term outcome measures should be encouraged. PROSPERO CRD42016035467; http://www.crd.york.ac.uk/prospero/display_record.php?ID=CRD 42016 035467(Archived by WebCite at http://www.webcitation.org/6vpgZU1FU). ©Xavier Armoiry, Jackie Sturt, Emma Elizabeth Phelps, Clare-Louise Walker, Rachel Court, Frances Taggart, Paul Sutcliffe, Frances Griffiths, Helen Atherton. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 05.01.2018.

Study and validation of tools interoperability in JPSEC

NASA Astrophysics Data System (ADS)

Conan, V.; Sadourny, Y.; Jean-Marie, K.; Chan, C.; Wee, S.; Apostolopoulos, J.

2005-08-01

Digital imagery is important in many applications today, and the security of digital imagery is important today and is likely to gain in importance in the near future. The emerging international standard ISO/IEC JPEG-2000 Security (JPSEC) is designed to provide security for digital imagery, and in particular digital imagery coded with the JPEG-2000 image coding standard. One of the primary goals of a standard is to ensure interoperability between creators and consumers produced by different manufacturers. The JPSEC standard, similar to the popular JPEG and MPEG family of standards, specifies only the bitstream syntax and the receiver's processing, and not how the bitstream is created or the details of how it is consumed. This paper examines the interoperability for the JPSEC standard, and presents an example JPSEC consumption process which can provide insights in the design of JPSEC consumers. Initial interoperability tests between different groups with independently created implementations of JPSEC creators and consumers have been successful in providing the JPSEC security services of confidentiality (via encryption) and authentication (via message authentication codes, or MACs). Further interoperability work is on-going.

Co-creation of a digital tool for the empowerment of parents of children with physical disabilities.

PubMed

Alsem, M W; van Meeteren, K M; Verhoef, M; Schmitz, M J W M; Jongmans, M J; Meily-Visser, J M A; Ketelaar, M

2017-01-01

Parents of children with physical disabilities do a lot to support their child in daily life. In doing this they are faced with many challenges. These parents have a wide range of unmet needs, especially for information, on different topics. It is sometimes hard for them to get the right information at the right moment, and to ask the right questions to physicians and other healthcare professionals. In order to develop a digital tool to help parents formulate questions and find information, we thought it would be crucial to work together in a process of co-creation with parents, researchers, IT-specialists and healthcare professionals. In close collaboration with them we developed a tool that aims to help parents ask questions, find information and take a more leading role in consultations with healthcare professionals, called the WWW-roadmap (WWW-wijzer in Dutch).In two groups of parents (one group with and one group without experience of using the tool), we will study the effects of using this tool, on consultations with physicians. We expect that using the tool will result in better empowerment, satisfaction and family-centred care. Parents of children with physical disabilities do much to support their child in daily life. In doing so, they are faced with many challenges. These parents have a wide range of unmet needs, especially for information, on various topics. Getting timely and reliable information is very difficult for parents, whereas being informed is a major requirement for the process of empowerment and shared decision-making. This paper describes the development of a digital tool to support parents in this process. During its development, working together with parents was crucial to address relevant topics and design a user-centred intervention. In co-creation with parents, healthcare professionals, IT-professionals and researchers, a digital tool was developed, the 'WWW-roadmap' ['WWW-wijzer' in Dutch]. This digital tool aims to enable parents to explore their questions (What do I want to know?), help in their search for information (Where can I find the information I need), and refer to appropriate professionals (Who can assist me further?).During the process, we got extensive feedback from a parent panel consisting of parents of children with physical disabilities, enabling us to create the tool 'with' rather than 'for' them. This led to a user-friendly and problem-driven tool. The WWW-roadmap can function as a tool to help parents formulate their questions, search for information and thus prepare for consultations with healthcare professionals, and to facilitate parental empowerment and shared-decision making by parent and professional. Effects of using the WWW-roadmap on consultations with professionals will be studied in the future.

Invited Article: Digital beam-forming imaging riometer systems

NASA Astrophysics Data System (ADS)

Honary, Farideh; Marple, Steve R.; Barratt, Keith; Chapman, Peter; Grill, Martin; Nielsen, Erling

2011-03-01

The design and operation of a new generation of digital imaging riometer systems developed by Lancaster University are presented. In the heart of the digital imaging riometer is a field-programmable gate array (FPGA), which is used for the digital signal processing and digital beam forming, completely replacing the analog Butler matrices which have been used in previous designs. The reconfigurable nature of the FPGA has been exploited to produce tools for remote system testing and diagnosis which have proven extremely useful for operation in remote locations such as the Arctic and Antarctic. Different FPGA programs enable different instrument configurations, including a 4 × 4 antenna filled array (producing 4 × 4 beams), an 8 × 8 antenna filled array (producing 7 × 7 beams), and a Mills cross system utilizing 63 antennas producing 556 usable beams. The concept of using a Mills cross antenna array for riometry has been successfully demonstrated for the first time. The digital beam forming has been validated by comparing the received signal power from cosmic radio sources with results predicted from the theoretical beam radiation pattern. The performances of four digital imaging riometer systems are compared against each other and a traditional imaging riometer utilizing analog Butler matrices. The comparison shows that digital imaging riometer systems, with independent receivers for each antenna, can obtain much better measurement precision for filled arrays or much higher spatial resolution for the Mills cross configuration when compared to existing imaging riometer systems.

Benefits and applications of interdisciplinary digital tools for environmental meta-reviews and analyses

NASA Astrophysics Data System (ADS)

Grubert, Emily; Siders, Anne

2016-09-01

Digitally-aided reviews of large bodies of text-based information, such as academic literature, are growing in capability but are not yet common in environmental fields. Environmental sciences and studies can benefit from application of digital tools to create comprehensive, replicable, interdisciplinary reviews that provide rapid, up-to-date, and policy-relevant reports of existing work. This work reviews the potential for applications of computational text mining and analysis tools originating in the humanities to environmental science and policy questions. Two process-oriented case studies of digitally-aided environmental literature reviews and meta-analyses illustrate potential benefits and limitations. A medium-sized, medium-resolution review (∼8000 journal abstracts and titles) focuses on topic modeling as a rapid way to identify thematic changes over time. A small, high-resolution review (∼300 full text journal articles) combines collocation and network analysis with manual coding to synthesize and question empirical field work. We note that even small digitally-aided analyses are close to the upper limit of what can be done manually. Established computational methods developed in humanities disciplines and refined by humanities and social science scholars to interrogate large bodies of textual data are applicable and useful in environmental sciences but have not yet been widely applied. Two case studies provide evidence that digital tools can enhance insight. Two major conclusions emerge. First, digital tools enable scholars to engage large literatures rapidly and, in some cases, more comprehensively than is possible manually. Digital tools can confirm manually identified patterns or identify additional patterns visible only at a large scale. Second, digital tools allow for more replicable and transparent conclusions to be drawn from literature reviews and meta-analyses. The methodological subfields of digital humanities and computational social sciences will likely continue to create innovative tools for analyzing large bodies of text, providing opportunities for interdisciplinary collaboration with the environmental fields.

Laser production of articles from powders

DOEpatents

Lewis, Gary K.; Milewski, John O.; Cremers, David A.; Nemec, Ronald B.; Barbe, Michael R.

1998-01-01

Method and apparatus for forming articles from materials in particulate form in which the materials are melted by a laser beam and deposited at points along a tool path to form an article of the desired shape and dimensions. Preferably the tool path and other parameters of the deposition process are established using computer-aided design and manufacturing techniques. A controller comprised of a digital computer directs movement of a deposition zone along the tool path and provides control signals to adjust apparatus functions, such as the speed at which a deposition head which delivers the laser beam and powder to the deposition zone moves along the tool path.

Laser production of articles from powders

DOEpatents

Lewis, G.K.; Milewski, J.O.; Cremers, D.A.; Nemec, R.B.; Barbe, M.R.

1998-11-17

Method and apparatus for forming articles from materials in particulate form in which the materials are melted by a laser beam and deposited at points along a tool path to form an article of the desired shape and dimensions. Preferably the tool path and other parameters of the deposition process are established using computer-aided design and manufacturing techniques. A controller comprised of a digital computer directs movement of a deposition zone along the tool path and provides control signals to adjust apparatus functions, such as the speed at which a deposition head which delivers the laser beam and powder to the deposition zone moves along the tool path. 20 figs.

Digitizing for Computer-Aided Finite Element Model Generation.

DTIC Science & Technology

1979-10-10

this approach is a collection of programs developed over the last eight years at the University of Arizona, and called the GIFTS system. This paper...briefly describes the latest version of the system, GIFTS -5, and demonstrates its suitability in a design environment by simple examples. The programs...constituting the GIFTS system were used as a tool for research in many areas, including mesh generation, finite element data base design, interactive

Managing Engineering Design Information

DTIC Science & Technology

1989-10-01

aerospace industry, and design operations cannot be delayed until a prior task is completed [Ref. 9]. 5 ReacDevelopment, and ’ Marketin ~g nceptal...Figure 4. Translator Interface Between Application Tools 12 2. Directory Data Base Approach The directory approach uses a data base with the traditional ...Technologies, 1985, pp. 313-320. 17. Bray, O.H., "Computer-Integrated Manufacturing: The Data Management Strategy," Digital Press, Bedford, MA, 1988. 18. Atre

Computer-generated holograms (CGH) realization: the integration of dedicated software tool with digital slides printer

NASA Astrophysics Data System (ADS)

Guarnieri, Vittorio; Francini, Franco

1997-12-01

Last generation of digital printer is usually characterized by a spatial resolution enough high to allow the designer to realize a binary CGH directly on a transparent film avoiding photographic reduction techniques. These devices are able to produce slides or offset prints. Furthermore, services supplied by commercial printing company provide an inexpensive method to rapidly verify the validity of the design by means of a test-and-trial process. Notably, this low-cost approach appears to be suitable for a didactical environment. On the basis of these considerations, a set of software tools able to design CGH's has been developed. The guidelines inspiring the work have been the following ones: (1) ray-tracing approach, considering the object to be reproduced as source of spherical waves; (2) Optimization and speed-up of the algorithms used, in order to produce a portable code, runnable on several hardware platforms. In this paper calculation methods to obtain some fundamental geometric functions (points, lines, curves) are described. Furthermore, by the juxtaposition of these primitives functions it is possible to produce the holograms of more complex objects. Many examples of generated CGHs are presented.

Designing and evaluating a STEM teacher learning opportunity in the research university.

PubMed

Hardré, Patricia L; Ling, Chen; Shehab, Randa L; Herron, Jason; Nanny, Mark A; Nollert, Matthias U; Refai, Hazem; Ramseyer, Christopher; Wollega, Ebisa D

2014-04-01

This study examines the design and evaluation strategies for a year-long teacher learning and development experience, including their effectiveness, efficiency and recommendations for strategic redesign. Design characteristics include programmatic features and outcomes: cognitive, affective and motivational processes; interpersonal and social development; and performance activities. Program participants were secondary math and science teachers, partnered with engineering faculty mentors, in a research university-based education and support program. Data from multiple sources demonstrated strengths and weaknesses in design of the program's learning environment, including: face-to-face and via digital tools; on-site and distance community interactions; and strategic evaluation tools and systems. Implications are considered for the strategic design and evaluation of similar grant-funded research experiences intended to support teacher learning, development and transfer. Copyright © 2013 Elsevier Ltd. All rights reserved.

A UVM simulation environment for the study, optimization and verification of HL-LHC digital pixel readout chips

NASA Astrophysics Data System (ADS)

Marconi, S.; Conti, E.; Christiansen, J.; Placidi, P.

2018-05-01

The operating conditions of the High Luminosity upgrade of the Large Hadron Collider are very demanding for the design of next generation hybrid pixel readout chips in terms of particle rate, radiation level and data bandwidth. To this purpose, the RD53 Collaboration has developed for the ATLAS and CMS experiments a dedicated simulation and verification environment using industry-consolidated tools and methodologies, such as SystemVerilog and the Universal Verification Methodology (UVM). This paper presents how the so-called VEPIX53 environment has first guided the design of digital architectures, optimized for processing and buffering very high particle rates, and secondly how it has been reused for the functional verification of the first large scale demonstrator chip designed by the collaboration, which has recently been submitted.

Computer program CORDET. [computerized simulation of digital phase-lock loop for Omega navigation receiver

NASA Technical Reports Server (NTRS)

Palkovic, R. A.

1974-01-01

A FORTRAN 4 computer program provides convenient simulation of an all-digital phase-lock loop (DPLL). The DPLL forms the heart of the Omega navigation receiver prototype. Through the DPLL, the phase of the 10.2 KHz Omega signal is estimated when the true signal phase is contaminated with noise. This investigation has provided a convenient means of evaluating loop performance in a variety of noise environments, and has proved to be a useful tool for evaluating design changes. The goals of the simulation are to: (1) analyze the circuit on a bit-by-bit level in order to evaluate the overall design; (2) see easily the effects of proposed design changes prior to actual breadboarding; and (3) determine the optimum integration time for the DPLL in an environment typical of general aviation conditions.

Software development for airborne radar

NASA Astrophysics Data System (ADS)

Sundstrom, Ingvar G.

Some aspects for development of software in a modern multimode airborne nose radar are described. First, an overview of where software is used in the radar units is presented. The development phases-system design, functional design, detailed design, function verification, and system verification-are then used as the starting point for the discussion. Methods, tools, and the most important documents are described. The importance of video flight recording in the early stages and use of a digital signal generators for performance verification is emphasized. Some future trends are discussed.

Application of a Design Space Exploration Tool to Enhance Interleaver Generation

DTIC Science & Technology

2009-06-24

2], originally dedicated to channel coding, are being currently reused in a large set of the whole digital communication systems (e.g. equalization... originally target interface synthesis, is shown to be also suited to the interleaver design space exploration. Our design flow can take as input...slice turbo codes,” in Proc. 3rd Int. Symp. Turbo Codes, Related Topics, Brest , 2003, pp. 343–346. [11] IEEE 802.15.3a, WPAN High Rate Alternative [12

Implementing Digital Tools to Support Student Questioning Abilities: A Collaborative Action Research Report

ERIC Educational Resources Information Center

Cadieux Bolden, Danielle; Hurt, June W.; Richardson, Mary Kathleen

2017-01-01

This collaborative action research project was conducted in a second-grade classroom to determine the impact that digital web-based tools would have in helping a school media coordinator scaffold her students' understanding of productive versus nonproductive questions. The digital tools Kahoot, Quizizz, and Socrative were used by the students to…

Digital Media for STEM Learning: Developing scientific practice skills in the K-12 STEM classroom with resources from WGBH and PBS LearningMedia

NASA Astrophysics Data System (ADS)

Foster, J.; Connolly, R.

2017-12-01

WGBH's "Bringing the Universe to America's Classrooms" project is a 5-year effort to design, produce and evaluate digital media tools and resources that support scientific practice skills in diverse K-12 learners. Resources leverage data and content from NASA and WGBH signature programs, like NOVA, into sound instructional experiences that provide K-12 STEM teachers with free, quality resources for teaching topics in the Earth and Space Sciences. Resources address the content and practices in the new K-12 Framework for Science Education and are aligned with the NGSS. Participants will learn about design strategies, findings from our evaluation efforts, and how to access free resources on PBS LearningMedia.

Digital and traditional slides for teaching cellular morphology: a comparative analysis of learning outcomes.

PubMed

Solberg, Brooke L

2012-01-01

Recent advances in technology have brought forth an intriguing new tool for teaching hematopoietic cellular identification skills: the digital slide. Although digitized slides offer a number of appealing options for educators, little research has been done to examine how their utilization would impact learning outcomes. To fill that void, this study was designed to examine student performance, skill retention and transferability, and self-efficacy beliefs amongst undergraduate MLS students learning cellular morphology with digital versus traditional slides. Results showed that students learning with digital slides performed better on assessments containing only traditional slide specimens than students learning with traditional slides, both immediately following the learning activity and after a considerable duration of time. Students learning with digital slides also reported slightly higher levels of self-efficacy related to cellular identification. The findings of this study suggest that students learning cellular identification skills with digital slides are able to transfer that skill directly to traditional slides, and that their ability to identify cells is not negatively affected in present or future settings.

Inspecting Engineering Samples

NASA Image and Video Library

2017-12-08

Goddard's Ritsko Wins 2011 SAVE Award The winner of the 2011 SAVE Award is Matthew Ritsko, a Goddard financial manager. His tool lending library would track and enable sharing of expensive space-flight tools and hardware after projects no longer need them. This set of images represents the types of tools used at NASA. To read more go to: www.nasa.gov/topics/people/features/ritsko-save.html Dr. Doug Rabin (Code 671) and PI La Vida Cooper (Code 564) inspect engineering samples of the HAS-2 imager which will be tested and readout using a custom ASIC with a 16-bit ADC (analog to digital converter) and CDS (correlated double sampling) circuit designed by the Code 564 ASIC group as a part of an FY10 IRAD. The purpose of the IRAD was to develop and high resolution digitizer for Heliophysics applications such as imaging. Future goals for the collaboration include characterization testing and eventually a sounding rocket flight of the integrated system. *ASIC= Application Specific Integrated Circuit NASA/GSFC/Chris Gunn

Digital Tools: Enhancing Painting Skills among Malaysian Secondary School Students

ERIC Educational Resources Information Center

Samah, Azimah A.; Putih, Abu Talib; Hussin, Zaharah

2016-01-01

Digital tools refer to software applications in the production of artworks particularly in painting. Digital art work is materialized by using computers, software and a combination of computer peripherals such as tablet support. With the aid of electronic equipment, digital artists manipulate pixels or coloring with light to compose the work and…

Multimodal Discourse Strategies of Factuality and Subjectivity in Educational Digital Storytelling

ERIC Educational Resources Information Center

Bou-Franch, Patricia

2012-01-01

As new technologies continue to emerge, students and lecturers are provided with new educational tools. One such tool, which is increasingly used in higher education, is digital storytelling, i.e. multi-media digital narratives. Despite the increasing attention that education and media scholars have paid to digital storytelling, there is scant…

Stereoscopic applications for design visualization

NASA Astrophysics Data System (ADS)

Gilson, Kevin J.

2007-02-01

Advances in display technology and 3D design visualization applications have made real-time stereoscopic visualization of architectural and engineering projects a reality. Parsons Brinkerhoff (PB) is a transportation consulting firm that has used digital visualization tools from their inception and has helped pioneer the application of those tools to large scale infrastructure projects. PB is one of the first Architecture/Engineering/Construction (AEC) firms to implement a CAVE- an immersive presentation environment that includes stereoscopic rear-projection capability. The firm also employs a portable stereoscopic front-projection system, and shutter-glass systems for smaller groups. PB is using commercial real-time 3D applications in combination with traditional 3D modeling programs to visualize and present large AEC projects to planners, clients and decision makers in stereo. These presentations create more immersive and spatially realistic presentations of the proposed designs. This paper will present the basic display tools and applications, and the 3D modeling techniques PB is using to produce interactive stereoscopic content. The paper will discuss several architectural and engineering design visualizations we have produced.

Digital Storytelling: A Tool for Identifying and Developing Cultural Competence with Preservice Teachers in an Introduction to Middle Level Education Course

ERIC Educational Resources Information Center

Ruppert, Nancy; Adcock, Lee T.; Crave, Jared

2017-01-01

Using five themes associated with a diversity intensive undergraduate course, preservice teachers in an upper level introduction to middle grade course described their knowledge of cultural competence using digital storytelling as the tool. Findings suggest digital storytelling provides a tool to explore and describe how cultural competence is…

Application of the Life Cycle Analysis and the Building Information Modelling Software in the Architectural Climate Change-Oriented Design Process

NASA Astrophysics Data System (ADS)

Gradziński, Piotr

2017-10-01

Whereas World’s climate is changing (inter alia, under the influence of architecture activity), the author attempts to reorientations design practice primarily in a direction the use and adapt to the climatic conditions. Architectural Design using in early stages of the architectural Design Process of the building, among other Life Cycle Analysis (LCA) and digital analytical tools BIM (Building Information Modelling) defines the overriding requirements which the designer/architect should meet. The first part, the text characterized the architecture activity influences (by consumption, pollution, waste, etc.) and the use of building materials (embodied energy, embodied carbon, Global Warming Potential, etc.) within the meaning of the direct negative environmental impact. The second part, the paper presents the revision of the methods and analytical techniques prevent negative influences. Firstly, showing the study of the building by using the Life Cycle Analysis of the structure (e.g. materials) and functioning (e.g. energy consumptions) of the architectural object (stages: before use, use, after use). Secondly, the use of digital analytical tools for determining the benefits of running multi-faceted simulations in terms of environmental factors (exposure to light, shade, wind) directly affecting shaping the form of the building. The conclusion, author’s research results highlight the fact that indicates the possibility of building design using the above-mentioned elements (LCA, BIM) causes correction, early designs decisions in the design process of architectural form, minimizing the impact on nature, environment. The work refers directly to the architectural-environmental dimensions, orienting the design process of buildings in respect of widely comprehended climatic changes.

Scaling up digital circuit computation with DNA strand displacement cascades.

PubMed

Qian, Lulu; Winfree, Erik

2011-06-03

To construct sophisticated biochemical circuits from scratch, one needs to understand how simple the building blocks can be and how robustly such circuits can scale up. Using a simple DNA reaction mechanism based on a reversible strand displacement process, we experimentally demonstrated several digital logic circuits, culminating in a four-bit square-root circuit that comprises 130 DNA strands. These multilayer circuits include thresholding and catalysis within every logical operation to perform digital signal restoration, which enables fast and reliable function in large circuits with roughly constant switching time and linear signal propagation delays. The design naturally incorporates other crucial elements for large-scale circuitry, such as general debugging tools, parallel circuit preparation, and an abstraction hierarchy supported by an automated circuit compiler.

Applying Strategic Visualization(Registered Trademark) to Lunar and Planetary Mission Design

NASA Technical Reports Server (NTRS)

Frassanito, John R.; Cooke, D. R.

2002-01-01

NASA teams, such as the NASA Exploration Team (NEXT), utilize advanced computational visualization processes to develop mission designs and architectures for lunar and planetary missions. One such process, Strategic Visualization (trademark), is a tool used extensively to help mission designers visualize various design alternatives and present them to other participants of their team. The participants, which may include NASA, industry, and the academic community, are distributed within a virtual network. Consequently, computer animation and other digital techniques provide an efficient means to communicate top-level technical information among team members. Today,Strategic Visualization(trademark) is used extensively both in the mission design process within the technical community, and to communicate the value of space exploration to the general public. Movies and digital images have been generated and shown on nationally broadcast television and the Internet, as well as in magazines and digital media. In our presentation will show excerpts of a computer-generated animation depicting the reference Earth/Moon L1 Libration Point Gateway architecture. The Gateway serves as a staging corridor for human expeditions to the lunar poles and other surface locations. Also shown are crew transfer systems and current reference lunar excursion vehicles as well as the Human and robotic construction of an inflatable telescope array for deployment to the Sun/Earth Libration Point.

Development of a Real-Time General-Purpose Digital Signal Processing Laboratory System.

DTIC Science & Technology

1983-12-01

should serve several important purposes: to familiarize students with the use of common DSP tools in an instructional environment, to serve as a research ...of Dayton Research Institute researchers for DSP software and DSP system design insight. 3. Formulation of statement of requirements for development...Neither the University of Dayton nor its Research Institute have a DSP computer system. While UD offered no software or DSP system design information

The LINDSAY Virtual Human Project: An immersive Approach to Anatomy and Physiology

ERIC Educational Resources Information Center

Tworek, Janet K.; Jamniczky, Heather A.; Jacob, Christian; Hallgrímsson, Benedikt; Wright, Bruce

2013-01-01

The increasing number of digital anatomy teaching software packages challenges anatomy educators on how to best integrate these tools for teaching and learning. Realistically, there exists a complex interplay of design, implementation, politics, and learning needs in the development and integration of software for education, each of which may be…

An Inquiry Approach to Construct Instructional Trajectories Based on the Use of Digital Technologies

ERIC Educational Resources Information Center

Santos-Trigo, Manuel

2008-01-01

There are diverse ways to construct instructional activities that teachers can use to foster their students' development of mathematical thinking. It is argued that the use of computational tools offers teachers the possibility of designing and exploring mathematical tasks from distinct perspectives that might lead their students to the…

The Sociotechnical Mediation of Lower-Income Pregnancy: A User-Centered Approach to Improving a HCI Design Space

ERIC Educational Resources Information Center

Peyton, Tamara Shirlene

2016-01-01

Developing and delivering contextually-sensitive user experiences in sociotechnical systems which are geared at helping lower-income women manage their pregnancies requires understanding the human, technological, and the sociotechnical perspectives that are embedded in the mediation of the experience. Yet most digital systems and tools for…

Using CD-ROMs as a Pedagogical Tool

ERIC Educational Resources Information Center

White, Andrew

2007-01-01

Purpose: This paper aims to explore the potential uses of CD-ROMs in multicultural education through an analysis of the development of a digital archive of political posters relating to the Northern Irish conflict. Design/methodology/approach: The author draws on literature on the relationship between new media platforms and the construction of…

Demonstrating Sound with Music Production Software

ERIC Educational Resources Information Center

Keeports, David

2010-01-01

Readily available software designed for the production of music can be adapted easily to the physics classroom. Programs such as Apple's GarageBand access large libraries of recorded sound waves that can be heard and displayed both before and after alterations. Tools such as real-time spectral analysers, digital effects, and audio file editors…

Integrating Community with Collections in Educational Digital Libraries

ERIC Educational Resources Information Center

Akbar, Monika

2013-01-01

Some classes of Internet users have specific information needs and specialized information-seeking behaviors. For example, educators who are designing a course might create a syllabus, recommend books, create lecture slides, and use tools as lecture aid. All of these resources are available online, but are scattered across a large number of…

Assessing team performance in the operating room: development and use of a "black-box" recorder and other tools for the intraoperative environment.

PubMed

Guerlain, Stephanie; Adams, Reid B; Turrentine, F Beth; Shin, Thomas; Guo, Hui; Collins, Stephen R; Calland, J Forrest

2005-01-01

The objective of this research was to develop a digital system to archive the complete operative environment along with the assessment tools for analysis of this data, allowing prospective studies of operative performance, intraoperative errors, team performance, and communication. Ability to study this environment will yield new insights, allowing design of systems to avoid preventable errors that contribute to perioperative complications. A multitrack, synchronized, digital audio-visual recording system (RATE tool) was developed to monitor intraoperative performance, including software to synchronize data and allow assignment of independent observational scores. Cases were scored for technical performance, participants' situational awareness (knowledge of critical information), and their comfort and satisfaction with the conduct of the procedure. Laparoscopic cholecystectomy (n = 10) was studied. Technical performance of the RATE tool was excellent. The RATE tool allowed real time, multitrack data collection of all aspects of the operative environment, while permitting digital recording of the objective assessment data in a time synchronized and annotated fashion during the procedure. The mean technical performance score was 73% +/- 28% of maximum (perfect) performance. Situational awareness varied widely among team members, with the attending surgeon typically the only team member having comprehensive knowledge of critical case information. The RATE tool allows prospective analysis of performance measures such as technical judgments, team performance, and communication patterns, offers the opportunity to conduct prospective intraoperative studies of human performance, and allows for postoperative discussion, review, and teaching. This study also suggests that gaps in situational awareness might be an underappreciated source of operative adverse events. Future uses of this system will aid teaching, failure or adverse event analysis, and intervention research.

Accurate Behavioral Simulator of All-Digital Time-Domain Smart Temperature Sensors by Using SIMULINK

PubMed Central

Chen, Chun-Chi; Chen, Chao-Lieh; Lin, You-Ting

2016-01-01

This study proposes a new behavioral simulator that uses SIMULINK for all-digital CMOS time-domain smart temperature sensors (TDSTSs) for performing rapid and accurate simulations. Inverter-based TDSTSs offer the benefits of low cost and simple structure for temperature-to-digital conversion and have been developed. Typically, electronic design automation tools, such as HSPICE, are used to simulate TDSTSs for performance evaluations. However, such tools require extremely long simulation time and complex procedures to analyze the results and generate figures. In this paper, we organize simple but accurate equations into a temperature-dependent model (TDM) by which the TDSTSs evaluate temperature behavior. Furthermore, temperature-sensing models of a single CMOS NOT gate were devised using HSPICE simulations. Using the TDM and these temperature-sensing models, a novel simulator in SIMULINK environment was developed to substantially accelerate the simulation and simplify the evaluation procedures. Experiments demonstrated that the simulation results of the proposed simulator have favorable agreement with those obtained from HSPICE simulations, showing that the proposed simulator functions successfully. This is the first behavioral simulator addressing the rapid simulation of TDSTSs. PMID:27509507

Proposal of an innovative benchmark for comparison of the performance of contactless digitizers

NASA Astrophysics Data System (ADS)

Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro

2010-10-01

Thanks to the improving performances of 3D optical scanners, in terms of accuracy and repeatability, reverse engineering applications have extended from CAD model design or reconstruction to quality control. Today, contactless digitizing devices constitute a good alternative to coordinate measuring machines (CMMs) for the inspection of certain parts. The German guideline VDI/VDE 2634 is the only reference to evaluate whether 3D optical measuring systems comply with the declared or required performance specifications. Nevertheless it is difficult to compare the performance of different scanners referring to such a guideline. An adequate novel benchmark is proposed in this paper: focusing on the inspection of production tools (moulds), the innovative test piece was designed using common geometries and free-form surfaces. The reference part is intended to be employed for the evaluation of the performance of several contactless digitizing devices in computer-aided inspection, considering dimensional and geometrical tolerances as well as other quantitative and qualitative criteria.

Rapid Prototyping of High Performance Signal Processing Applications

NASA Astrophysics Data System (ADS)

Sane, Nimish

Advances in embedded systems for digital signal processing (DSP) are enabling many scientific projects and commercial applications. At the same time, these applications are key to driving advances in many important kinds of computing platforms. In this region of high performance DSP, rapid prototyping is critical for faster time-to-market (e.g., in the wireless communications industry) or time-to-science (e.g., in radio astronomy). DSP system architectures have evolved from being based on application specific integrated circuits (ASICs) to incorporate reconfigurable off-the-shelf field programmable gate arrays (FPGAs), the latest multiprocessors such as graphics processing units (GPUs), or heterogeneous combinations of such devices. We, thus, have a vast design space to explore based on performance trade-offs, and expanded by the multitude of possibilities for target platforms. In order to allow systematic design space exploration, and develop scalable and portable prototypes, model based design tools are increasingly used in design and implementation of embedded systems. These tools allow scalable high-level representations, model based semantics for analysis and optimization, and portable implementations that can be verified at higher levels of abstractions and targeted toward multiple platforms for implementation. The designer can experiment using such tools at an early stage in the design cycle, and employ the latest hardware at later stages. In this thesis, we have focused on dataflow-based approaches for rapid DSP system prototyping. This thesis contributes to various aspects of dataflow-based design flows and tools as follows: 1. We have introduced the concept of topological patterns, which exploits commonly found repetitive patterns in DSP algorithms to allow scalable, concise, and parameterizable representations of large scale dataflow graphs in high-level languages. We have shown how an underlying design tool can systematically exploit a high-level application specification consisting of topological patterns in various aspects of the design flow. 2. We have formulated the core functional dataflow (CFDF) model of computation, which can be used to model a wide variety of deterministic dynamic dataflow behaviors. We have also presented key features of the CFDF model and tools based on these features. These tools provide support for heterogeneous dataflow behaviors, an intuitive and common framework for functional specification, support for functional simulation, portability from several existing dataflow models to CFDF, integrated emphasis on minimally-restricted specification of actor functionality, and support for efficient static, quasi-static, and dynamic scheduling techniques. 3. We have developed a generalized scheduling technique for CFDF graphs based on decomposition of a CFDF graph into static graphs that interact at run-time. Furthermore, we have refined this generalized scheduling technique using a new notion of "mode grouping," which better exposes the underlying static behavior. We have also developed a scheduling technique for a class of dynamic applications that generates parameterized looped schedules (PLSs), which can handle dynamic dataflow behavior without major limitations on compile-time predictability. 4. We have demonstrated the use of dataflow-based approaches for design and implementation of radio astronomy DSP systems using an application example of a tunable digital downconverter (TDD) for spectrometers. Design and implementation of this module has been an integral part of this thesis work. This thesis demonstrates a design flow that consists of a high-level software prototype, analysis, and simulation using the dataflow interchange format (DIF) tool, and integration of this design with the existing tool flow for the target implementation on an FPGA platform, called interconnect break-out board (IBOB). We have also explored the trade-off between low hardware cost for fixed configurations of digital downconverters and flexibility offered by TDD designs. 5. This thesis has contributed significantly to the development and release of the latest version of a graph package oriented toward models of computation (MoCGraph). Our enhancements to this package include support for tree data structures, and generalized schedule trees (GSTs), which provide a useful data structure for a wide variety of schedule representations. Our extensions to the MoCGraph package provided key support for the CFDF model, and functional simulation capabilities in the DIF package.

Technology tools to support reading in the digital age.

PubMed

Biancarosa, Gina; Griffiths, Gina G

2012-01-01

Advances in digital technologies are dramatically altering the texts and tools available to teachers and students. These technological advances have created excitement among many for their potential to be used as instructional tools for literacy education. Yet with the promise of these advances come issues that can exacerbate the literacy challenges identified in the other articles in this issue. In this article Gina Biancarosa and Gina Griffiths characterize how literacy demands have changed in the digital age and how challenges identified in other articles in the issue intersect with these new demands. Rather than seeing technology as something to be fit into an already crowded education agenda, Biancarosa and Griffiths argue that technology can be conceptualized as affording tools that teachers can deploy in their quest to create young readers who possess the higher levels of literacy skills and background knowledge demanded by today's information-based society. Biancarosa and Griffiths draw on research to highlight some of the ways technology has been used to build the skills and knowledge needed both by children who are learning to read and by those who have progressed to reading to learn. In their review of the research, Biancarosa and Griffiths focus on the hardware and software used to display and interface with digital text, or what they term e-reading technology. Drawing on studies of e-reading technology and computer technology more broadly, they also reflect on the very real, practical challenges to optimal use of e-reading technology. The authors conclude by presenting four recommendations to help schools and school systems meet some of the challenges that come with investing in e-reading technology: use only technologies that support Universal Design for Learning; choose evidence-based tools; provide technology users with systemic supports; and capitalize on the data capacities and volume of information that technology provides.

A Patient-Centered Framework for Evaluating Digital Maturity of Health Services: A Systematic Review

PubMed Central

Callahan, Ryan; Darzi, Ara; Mayer, Erik

2016-01-01

Background Digital maturity is the extent to which digital technologies are used as enablers to deliver a high-quality health service. Extensive literature exists about how to assess the components of digital maturity, but it has not been used to design a comprehensive framework for evaluation. Consequently, the measurement systems that do exist are limited to evaluating digital programs within one service or care setting, meaning that digital maturity evaluation is not accounting for the needs of patients across their care pathways. Objective The objective of our study was to identify the best methods and metrics for evaluating digital maturity and to create a novel, evidence-based tool for evaluating digital maturity across patient care pathways. Methods We systematically reviewed the literature to find the best methods and metrics for evaluating digital maturity. We searched the PubMed database for all papers relevant to digital maturity evaluation. Papers were selected if they provided insight into how to appraise digital systems within the health service and if they indicated the factors that constitute or facilitate digital maturity. Papers were analyzed to identify methodology for evaluating digital maturity and indicators of digitally mature systems. We then used the resulting information about methodology to design an evaluation framework. Following that, the indicators of digital maturity were extracted and grouped into increasing levels of maturity and operationalized as metrics within the evaluation framework. Results We identified 28 papers as relevant to evaluating digital maturity, from which we derived 5 themes. The first theme concerned general evaluation methodology for constructing the framework (7 papers). The following 4 themes were the increasing levels of digital maturity: resources and ability (6 papers), usage (7 papers), interoperability (3 papers), and impact (5 papers). The framework includes metrics for each of these levels at each stage of the typical patient care pathway. Conclusions The framework uses a patient-centric model that departs from traditional service-specific measurements and allows for novel insights into how digital programs benefit patients across the health system. Trial Registration N/A PMID:27080852

A digitalized silicon microgyroscope based on embedded FPGA.

PubMed

Xia, Dunzhu; Yu, Cheng; Wang, Yuliang

2012-09-27

This paper presents a novel digital miniaturization method for a prototype silicon micro-gyroscope (SMG) with the symmetrical and decoupled structure. The schematic blocks of the overall system consist of high precision analog front-end interface, high-speed 18-bit analog to digital convertor, a high-performance core Field Programmable Gate Array (FPGA) chip and other peripherals such as high-speed serial ports for transmitting data. In drive mode, the closed-loop drive circuit are implemented by automatic gain control (AGC) loop and software phase-locked loop (SPLL) based on the Coordinated Rotation Digital Computer (CORDIC) algorithm. Meanwhile, the sense demodulation module based on varying step least mean square demodulation (LMSD) are addressed in detail. All kinds of algorithms are simulated by Simulink and DSPbuilder tools, which is in good agreement with the theoretical design. The experimental results have fully demonstrated the stability and flexibility of the system.

A Digitalized Silicon Microgyroscope Based on Embedded FPGA

PubMed Central

Xia, Dunzhu; Yu, Cheng; Wang, Yuliang

2012-01-01

This paper presents a novel digital miniaturization method for a prototype silicon micro-gyroscope (SMG) with the symmetrical and decoupled structure. The schematic blocks of the overall system consist of high precision analog front-end interface, high-speed 18-bit analog to digital convertor, a high-performance core Field Programmable Gate Array (FPGA) chip and other peripherals such as high-speed serial ports for transmitting data. In drive mode, the closed-loop drive circuit are implemented by automatic gain control (AGC) loop and software phase-locked loop (SPLL) based on the Coordinated Rotation Digital Computer (CORDIC) algorithm. Meanwhile, the sense demodulation module based on varying step least mean square demodulation (LMSD) are addressed in detail. All kinds of algorithms are simulated by Simulink and DSPbuilder tools, which is in good agreement with the theoretical design. The experimental results have fully demonstrated the stability and flexibility of the system. PMID:23201990

Digital technologies in support of flood resilience: A case study from Nepal

NASA Astrophysics Data System (ADS)

Liu, Wei; McCallum, Ian; See, Linda; Dugar, Sumit; Laso-Bayas, Juan-Carlos

2016-04-01

This paper presents ongoing efforts to support flood resilience in the Karnali basin in Nepal through the provision of different forms of digital technology. Flood Risk Geo-Wiki is an online visualization and crowdsourcing tool, which has been adapted to display flood risk maps at the global scale as well as information of relevance to planners and the community at the local level. Community-based flood risk maps, which have traditionally been drawn on paper, are being digitized and integrated with OpenStreetMap to provide better access to this collective knowledge base. Mobile phones, using the GeoODK (Geographical Open Data Kit) questionnaire builder, are being deployed to collect georeferenced information on flood risks and vulnerability, which can be used to validate flood models and design action plans and strategies for coping with future flood events. These types of digital technologies are simple to implement yet together can help support flood prone communities.

Evaluation of a Digital Companion for Older Adults with Mild Cognitive Impairment.

PubMed

Demiris, George; Thompson, Hilaire J; Lazar, Amanda; Lin, Shih-Yin

2016-01-01

Study Objective: The purpose of this study was to examine the feasibility of a digital companion system used by older adults with mild cognitive impairment (MCI). We utilized a commercially available system that is comprehensive in its functionalities (including conversation ability, use of pictures and other media, and reminders) to explore the system's impact on older adults ' social interactions, anxiety, depressive symptoms, and acceptance of the system. Study Design: We conducted a three-month mixed methods evaluation study of the digital companion. Results: Ten female community-dwelling older adults (average age 78.3 years) participated in the study. Overall, participants utilized the tool regularly and appreciated its presence and their interactions. Participants scored higher at the end of the study in cognition and social support scales, and lower in presence of depressive symptoms. Conclusion: Findings indicate the feasibility of a digital companion for people with MCI and inform the need for additional research.

Digital Geology from field to 3D modelling and Google Earth virtual environment: methods and goals from the Furlo Gorge (Northern Apennines - Italy)

NASA Astrophysics Data System (ADS)

De Donatis, Mauro; Susini, Sara

2014-05-01

A new map of the Furlo Gorge was surveyed and elaborated in a digital way. In every step of work we used digital tools as mobile GIS and 3D modelling software. Phase 1st Starting in the lab, planning the field project development, base cartography, forms and data base were designed in the way we thought was the best for collecting and store data in order of producing a digital n­-dimensional map. Bedding attitudes, outcrops sketches and description, stratigraphic logs, structural features and other informations were collected and organised in a structured database using rugged tablet PC, GPS receiver, digital cameras and later also an Android smartphone with some survey apps in-­house developed. A new mobile GIS (BeeGIS) was developed starting from an open source GIS (uDig): a number of tools like GPS connection, pen drawing annotations, geonotes, fieldbook, photo synchronization and geotagging were originally designed. Phase 2nd After some month of digital field work, all the informations were elaborated for drawing a geologic map in GIS environment. For that we use both commercial (ArcGIS) and open source (gvSig, QGIS, uDig) without big technical problems. Phase 3rd When we get to the step of building a 3D model (using 3DMove), passing trough the assisted drawing of cross-­sections (2DMove), we discovered a number of problems in the interpretation of geological structures (thrusts, normal faults) and more in the interpretation of stratigraphic thickness and boundaries and their relationships with topography. Phase 4th Before an "on­-armchair" redrawing of map, we decide to go back to the field and check directly what was wrong. Two main vantages came from this: (1) the mistakes we found could be reinterpreted and corrected directly in the field having all digital tools we need; (2) previous interpretations could be stored in GIS layers keeping memory of the previous work (also mistakes). Phase 5th A 3D model built with 3D Move is already almost self­-consistent in showing the structural features of the study area. The work was not so straightforward, but the result is more then satisfying, even if some limitations were not solved (i.e. visualisation of bedding attitudes). Geological maps are fundamental for knowledge transfer among experts but, if combined with the innovative digital methods from survey to 3D model, this knowledges could reach a much larger number of people, allowing a cultural growth and the establishment of a larger awareness of the Earth and Environment.

Developing a mapping tool for tablets

NASA Astrophysics Data System (ADS)

Vaughan, Alan; Collins, Nathan; Krus, Mike

2014-05-01

Digital field mapping offers significant benefits when compared with traditional paper mapping techniques in that it provides closer integration with downstream geological modelling and analysis. It also provides the mapper with the ability to rapidly integrate new data with existing databases without the potential degradation caused by repeated manual transcription of numeric, graphical and meta-data. In order to achieve these benefits, a number of PC-based digital mapping tools are available which have been developed for specific communities, eg the BGS•SIGMA project, Midland Valley's FieldMove®, and a range of solutions based on ArcGIS® software, which can be combined with either traditional or digital orientation and data collection tools. However, with the now widespread availability of inexpensive tablets and smart phones, a user led demand for a fully integrated tablet mapping tool has arisen. This poster describes the development of a tablet-based mapping environment specifically designed for geologists. The challenge was to deliver a system that would feel sufficiently close to the flexibility of paper-based geological mapping while being implemented on a consumer communication and entertainment device. The first release of a tablet-based geological mapping system from this project is illustrated and will be shown as implemented on an iPad during the poster session. Midland Valley is pioneering tablet-based mapping and, along with its industrial and academic partners, will be using the application in field based projects throughout this year and will be integrating feedback in further developments of this technology.

Automating analog design: Taming the shrew

NASA Technical Reports Server (NTRS)

Barlow, A.

1990-01-01

The pace of progress in the design of integrated circuits continues to amaze observers inside and outside of the industry. Three decades ago, a 50 transistor chip was a technological wonder. Fifteen year later, a 5000 transistor device would 'wow' the crowds. Today, 50,000 transistor chips will earn a 'not too bad' assessment, but it takes 500,000 to really leave an impression. In 1975 a typical ASIC device had 1000 transistors, took one year to first samples (and two years to production) and sold for about 5 cents per transistor. Today's 50,000 transistor gate array takes about 4 months from spec to silicon, works the first time, and sells for about 0.02 cents per transistor. Fifteen years ago, the single most laborious and error prone step in IC design was the physical layout. Today, most IC's never see the hand of a layout designer: and automatic place and route tool converts the engineer's computer captured schematic to a complete physical design using a gate array or a library of standard cells also created by software rather than by designers. CAD has also been a generous benefactor to the digital design process. The architect of today's digital systems creates the design using an RTL or other high level simulator. Then the designer pushes a button to invoke the logic synthesizer-optimizer tool. A fault analyzer checks the result for testability and suggests where scan based cells will improve test coverage. One obstinate holdout amidst this parade of progress is the automation of analog design and its reduction to semi-custom techniques. This paper investigates the application of CAD techniques to analog design.

Analog Tools in Digital History Classrooms: An Activity-Theory Case Study of Learning Opportunities in Digital Humanities

ERIC Educational Resources Information Center

Craig, Kalani

2017-01-01

Digital humanities is often presented as classroom savior, a narrative that competes against the idea that technology virtually guarantees student distraction. However, these arguments are often based on advocacy and anecdote, so we lack systematic research that explores the effect of digital-humanities tools and techniques such as text mining,…

The Affective Slider: A Digital Self-Assessment Scale for the Measurement of Human Emotions

PubMed Central

Betella, Alberto; Verschure, Paul F. M. J.

2016-01-01

Self-assessment methods are broadly employed in emotion research for the collection of subjective affective ratings. The Self-Assessment Manikin (SAM), a pictorial scale developed in the eighties for the measurement of pleasure, arousal, and dominance, is still among the most popular self-reporting tools, despite having been conceived upon design principles which are today obsolete. By leveraging on state-of-the-art user interfaces and metacommunicative pictorial representations, we developed the Affective Slider (AS), a digital self-reporting tool composed of two slider controls for the quick assessment of pleasure and arousal. To empirically validate the AS, we conducted a systematic comparison between AS and SAM in a task involving the emotional assessment of a series of images taken from the International Affective Picture System (IAPS), a database composed of pictures representing a wide range of semantic categories often used as a benchmark in psychological studies. Our results show that the AS is equivalent to SAM in the self-assessment of pleasure and arousal, with two added advantages: the AS does not require written instructions and it can be easily reproduced in latest-generation digital devices, including smartphones and tablets. Moreover, we compared new and normative IAPS ratings and found a general drop in reported arousal of pictorial stimuli. Not only do our results demonstrate that legacy scales for the self-report of affect can be replaced with new measurement tools developed in accordance to modern design principles, but also that standardized sets of stimuli which are widely adopted in research on human emotion are not as effective as they were in the past due to a general desensitization towards highly arousing content. PMID:26849361

The intelligent use of digital tools and social media in practice management.

PubMed

Carroll, Christopher L; Ramachandran, Pradeep

2014-04-01

The Internet has fundamentally transformed the way patients and health-care providers communicate and interact. The use of digital tools and social media platforms, such as blogs, Facebook, Instagram, and Twitter, have empowered patients to expand their health-care knowledge and have provided practitioners with new ways to gain knowledge, lead discussions, promote causes, and build relationships with patients and other providers. In this article, we discuss the difference between digital communication, static one-way digital presence, and two-way social media connections. We also describe ways to establish and foster your digital profile, review the benefits and risks of engaging professionally in social media, and describe ways in which digital and social media tools may prove useful in both reimbursement and practice management.

The element of naturalness when evaluating image quality of digital photo documentation after sexual assault.

PubMed

Ernst, E J; Speck, P M; Fitzpatrick, J J

2012-01-01

Digital photography is a valuable adjunct to document physical injuries after sexual assault. In order for a digital photograph to have high image quality, there must exist a high level of naturalness. Digital photo documentation has varying degrees of naturalness; however, for a photograph to be natural, specific technical elements for the viewer must be satisfied. No tool was available to rate the naturalness of digital photo documentation of female genital injuries after sexual assault. The Photo Documentation Image Quality Scoring System (PDIQSS) tool was developed to rate technical elements for naturalness. Using this tool, experts evaluated randomly selected digital photographs of female genital injuries captured following sexual assault. Naturalness of female genital injuries following sexual assault was demonstrated when measured in all dimensions.

Design of a digital multiradian phase detector and its application in fusion plasma interferometry.

PubMed

Mlynek, A; Schramm, G; Eixenberger, H; Sips, G; McCormick, K; Zilker, M; Behler, K; Eheberg, J

2010-03-01

We discuss the circuit design of a digital multiradian phase detector that measures the phase difference between two 10 kHz square wave TTL signals and provides the result as a binary number. The phase resolution of the circuit is 1/64 period and its dynamic range is 256 periods. This circuit has been developed for fusion plasma interferometry with submillimeter waves on the ASDEX Upgrade tokamak. The results from interferometric density measurement are discussed and compared to those obtained with the previously used phase detectors, especially with respect to the occurrence of phase jumps. It is illustrated that the new phase measurement provides a powerful tool for automatic real-time validation of the measured density, which is important for feedback algorithms that are sensitive to spurious density signals.

Innovation Online Teaching Module Plus Digital Engineering Kit with Proteus Software through Hybrid Learning Method to Improve Student Skills

NASA Astrophysics Data System (ADS)

Kholis, Nur; Syariffuddien Zuhrie, Muhamad; Rahmadian, Reza

2018-04-01

Demands the competence (competence) needs of the industry today is a competent workforce to the field of work. However, during this lecture material Digital Engineering (Especially Digital Electronics Basics and Digital Circuit Basics) is limited to the delivery of verbal form of lectures (classical method) is dominated by the Lecturer (Teacher Centered). Though the subject of Digital Engineering requires learning tools and is required understanding of electronic circuits, digital electronics and high logic circuits so that learners can apply in the world of work. One effort to make it happen is by creating an online teaching module and educational aids (Kit) with the help of Proteus software that can improve the skills of learners. This study aims to innovate online teaching modules plus kits in Proteus-assisted digital engineering courses through hybrid learning approaches to improve the skills of learners. The process of innovation is done by considering the skills and mastery of the technology of students (students) Department of Electrical Engineering - Faculty of Engineering – Universitas Negeri Surabaya to produce quality graduates Use of online module plus Proteus software assisted kit through hybrid learning approach. In general, aims to obtain adequate results with affordable cost of investment, user friendly, attractive and interactive (easily adapted to the development of Information and Communication Technology). With the right design, implementation and operation, both in the form of software both in the form of Online Teaching Module, offline teaching module, Kit (Educational Viewer), and e-learning learning content (both online and off line), the use of the three tools of the expenditure will be able to adjust the standard needs of Information and Communication Technology world, both nationally and internationally.

Novel Tool for Complete Digitization of Paper Electrocardiography Data.

PubMed

Ravichandran, Lakshminarayan; Harless, Chris; Shah, Amit J; Wick, Carson A; Mcclellan, James H; Tridandapani, Srini

We present a Matlab-based tool to convert electrocardiography (ECG) information from paper charts into digital ECG signals. The tool can be used for long-term retrospective studies of cardiac patients to study the evolving features with prognostic value. To perform the conversion, we: 1) detect the graphical grid on ECG charts using grayscale thresholding; 2) digitize the ECG signal based on its contour using a column-wise pixel scan; and 3) use template-based optical character recognition to extract patient demographic information from the paper ECG in order to interface the data with the patients' medical record. To validate the digitization technique: 1) correlation between the digital signals and signals digitized from paper ECG are performed and 2) clinically significant ECG parameters are measured and compared from both the paper-based ECG signals and the digitized ECG. The validation demonstrates a correlation value of 0.85-0.9 between the digital ECG signal and the signal digitized from the paper ECG. There is a high correlation in the clinical parameters between the ECG information from the paper charts and digitized signal, with intra-observer and inter-observer correlations of 0.8-0.9 (p < 0.05), and kappa statistics ranging from 0.85 (inter-observer) to 1.00 (intra-observer). The important features of the ECG signal, especially the QRST complex and the associated intervals, are preserved by obtaining the contour from the paper ECG. The differences between the measures of clinically important features extracted from the original signal and the reconstructed signal are insignificant, thus highlighting the accuracy of this technique. Using this type of ECG digitization tool to carry out retrospective studies on large databases, which rely on paper ECG records, studies of emerging ECG features can be performed. In addition, this tool can be used to potentially integrate digitized ECG information with digital ECG analysis programs and with the patient's electronic medical record.

Access to digital library databases in higher education: design problems and infrastructural gaps.

PubMed

Oswal, Sushil K

2014-01-01

After defining accessibility and usability, the author offers a broad survey of the research studies on digital content databases which have thus far primarily depended on data drawn from studies conducted by sighted researchers with non-disabled users employing screen readers and low vision devices. This article aims at producing a detailed description of the difficulties confronted by blind screen reader users with online library databases which now hold most of the academic, peer-reviewed journal and periodical content essential for research and teaching in higher education. The approach taken here is borrowed from descriptive ethnography which allows the author to create a complete picture of the accessibility and usability problems faced by an experienced academic user of digital library databases and screen readers. The author provides a detailed analysis of the different aspects of accessibility issues in digital databases under several headers with a special focus on full-text PDF files. The author emphasizes that long-term studies with actual, blind screen reader users employing both qualitative and computerized research tools can yield meaningful data for the designers and developers to improve these databases to a level that they begin to provide an equal access to the blind.

Pinocchio testing in the forensic analysis of waiting lists: using public waiting list data from Finland and Spain for testing Newcomb-Benford’s Law

PubMed Central

López-Valcárcel, Beatriz G; González-Martel, Christian; Peiro, Salvador

2018-01-01

Objective Newcomb-Benford’s Law (NBL) proposes a regular distribution for first digits, second digits and digit combinations applicable to many different naturally occurring sources of data. Testing deviations from NBL is used in many datasets as a screening tool for identifying data trustworthiness problems. This study aims to compare public available waiting lists (WL) data from Finland and Spain for testing NBL as an instrument to flag up potential manipulation in WLs. Design Analysis of the frequency of Finnish and Spanish WLs first digits to determine if their distribution is similar to the pattern documented by NBL. Deviations from the expected first digit frequency were analysed using Pearson’s χ2, mean absolute deviation and Kuiper tests. Setting/participants Publicly available WL data from Finland and Spain, two countries with universal health insurance and National Health Systems but characterised by different levels of transparency and good governance standards. Main outcome measures Adjustment of the observed distribution of the numbers reported in Finnish and Spanish WL data to the expected distribution according to NBL. Results WL data reported by the Finnish health system fits first digit NBL according to all statistical tests used (p=0.6519 in χ2 test). For Spanish data, this hypothesis was rejected in all tests (p<0.0001 in χ2 test). Conclusions Testing deviations from NBL distribution can be a useful tool to identify problems with WL data trustworthiness and signalling the need for further testing. PMID:29743333

Use of computers in dysmorphology.

PubMed Central

Diliberti, J H

1988-01-01

As a consequence of the increasing power and decreasing cost of digital computers, dysmorphologists have begun to explore a wide variety of computerised applications in clinical genetics. Of considerable interest are developments in the areas of syndrome databases, expert systems, literature searches, image processing, and pattern recognition. Each of these areas is reviewed from the perspective of the underlying computer principles, existing applications, and the potential for future developments. Particular emphasis is placed on the analysis of the tasks performed by the dysmorphologist and the design of appropriate tools to facilitate these tasks. In this context the computer and associated software are considered paradigmatically as tools for the dysmorphologist and should be designed accordingly. Continuing improvements in the ability of computers to manipulate vast amounts of data rapidly makes the development of increasingly powerful tools for the dysmorphologist highly probable. PMID:3050092

Simulations of Interdigitated Electrode Interactions with Gold Nanoparticles for Impedance-Based Biosensing Applications

PubMed Central

MacKay, Scott; Hermansen, Peter; Wishart, David; Chen, Jie

2015-01-01

In this paper, we describe a point-of-care biosensor design. The uniqueness of our design is in its capability for detecting a wide variety of target biomolecules and the simplicity of nanoparticle enhanced electrical detection. The electrical properties of interdigitated electrodes (IDEs) and the mechanism for gold nanoparticle-enhanced impedance-based biosensor systems based on these electrodes are simulated using COMSOL Multiphysics software. Understanding these properties and how they can be affected is vital in designing effective biosensor devices. Simulations were used to show electrical screening develop over time for IDEs in a salt solution, as well as the electric field between individual digits of electrodes. Using these simulations, it was observed that gold nanoparticles bound closely to IDEs can lower the electric field magnitude between the digits of the electrode. The simulations are also shown to be a useful design tool in optimizing sensor function. Various different conditions, such as electrode dimensions and background ion concentrations, are shown to have a significant impact on the simulations. PMID:26364638

Investigating the Digital Addiction Level of the University Students According to Their Purposes for Using Digital Tools

ERIC Educational Resources Information Center

Kesici, Ahmet; Tunç, Nazenin Fidan

2018-01-01

This study was carried out to investigate the digital addiction (DA) level of the university students according to their purposes for using digital tools. 527 students studying at the faculties of education of Erzincan, Dicle, and Siirt Universities participated this study in which general survey model was used. A form was used to reveal for which…

Macrootlocus, a CAD Design Tool for Feedback Control Systems

DTIC Science & Technology

1989-12-01

var Form :DecForm; Str :DecStr; begin 125 Form.Style, :. FixedDecimal; Forrr.Digits :. 0; Num2Str(Form, 1, Str ); lntToStr :. Str ; end; { lntToStr...School Monterey, CA 93943 15. Hong-on Kim SMC2665 Naval Postgraduate School Monterey, CA 93943 16. Kang, Mung Hung SMC1375 Naval Postgraduate School

A Blended Learning Framework for Curriculum Design and Professional Development

ERIC Educational Resources Information Center

Mirriahi, Negin; Alonzo, Dennis; Fox, Bob

2015-01-01

The need for flexibility in learning and the affordances of technology provided the impetus for the rise of blended learning (BL) globally across higher education institutions. However, the adoption of BL practices continues at a low pace due to academics' low digital fluency, various views and BL definitions, and limited standards-based tools to…

OTLA: A New Model for Online Teaching, Learning and Assessment in Higher Education

ERIC Educational Resources Information Center

Ghilay, Yaron; Ghilay, Ruth

2013-01-01

The study examined a new asynchronous model for online teaching, learning and assessment, called OTLA. It is designed for higher-education institutions and is based on LMS (Learning Management System) as well as other relevant IT tools. The new model includes six digital basic components: text, hypertext, text reading, lectures (voice/video),…

The Space for Social Media in Structured Online Learning

ERIC Educational Resources Information Center

Salmon, Gilly; Ross, Bella; Pechenkina, Ekaterina; Chase, Anne-Marie

2015-01-01

In this paper, we explore the benefits of using social media in an online educational setting, with a particular focus on the use of Facebook and Twitter by participants in a Massive Open Online Course (MOOC) developed to enable educators to learn about the Carpe Diem learning design process. We define social media as digital social tools and…

Proposing an Evaluation Framework for Interventions: Focusing on Students' Behaviours in Interactive Science Exhibitions

ERIC Educational Resources Information Center

Hauan, Nils Petter; DeWitt, Jennifer; Kolstø, Stein Dankert

2017-01-01

Materials designed for self-guided experiences such as worksheets and digital applications are widely used as tools to enable interactive science exhibitions to support students' progress towards conceptual understanding. However, there is a need to find expedient ways to evaluate the quality of educational experiences resulting from the use of…

Data Analysis Tools and Methods for Improving the Interaction Design in E-Learning

ERIC Educational Resources Information Center

Popescu, Paul Stefan

2015-01-01

In this digital era, learning from data gathered from different software systems may have a great impact on the quality of the interaction experience. There are two main directions that come to enhance this emerging research domain, Intelligent Data Analysis (IDA) and Human Computer Interaction (HCI). HCI specific research methodologies can be…

Promoting Inclusive Chemistry Teaching by Developing an Accessible Thermometer for Students with Visual Disabilities

ERIC Educational Resources Information Center

Vitoriano, Felipe A.; Teles, Vânia L. G.; Rizzatti, Ivanise M.; Pesssoa de Lima, Régia C.

2016-01-01

This work discusses the construction and evaluation of a digital thermometer especially designed to be operated by people with visual disabilities. The accessibility thermometer can be used as an educational tool in practical activities in classes for sighted and visually impaired students, with the aim of helping those with special needs gain…

Visualization Forms in the Cross-Cultural Collaborative Activities of Design and Development of a Digital Resource for Education

ERIC Educational Resources Information Center

Quan, Guolong; Gu, Xiaoqing

2018-01-01

Recent studies have demonstrated the integration of visualization technology to support collaboration and stimulate learning performance. The use of visualization tools during the collaborative activities of international students is a worthy topic for further exploration. Based on grounded and activity theories, this research uses observation and…

Prediction of near-surface soil moisture at large scale by digital terrain modeling and neural networks.

PubMed

Lavado Contador, J F; Maneta, M; Schnabel, S

2006-10-01

The capability of Artificial Neural Network models to forecast near-surface soil moisture at fine spatial scale resolution has been tested for a 99.5 ha watershed located in SW Spain using several easy to achieve digital models of topographic and land cover variables as inputs and a series of soil moisture measurements as training data set. The study methods were designed in order to determining the potentials of the neural network model as a tool to gain insight into soil moisture distribution factors and also in order to optimize the data sampling scheme finding the optimum size of the training data set. Results suggest the efficiency of the methods in forecasting soil moisture, as a tool to assess the optimum number of field samples, and the importance of the variables selected in explaining the final map obtained.

Scientific Digital Libraries, Interoperability, and Ontologies

NASA Technical Reports Server (NTRS)

Hughes, J. Steven; Crichton, Daniel J.; Mattmann, Chris A.

2009-01-01

Scientific digital libraries serve complex and evolving research communities. Justifications for the development of scientific digital libraries include the desire to preserve science data and the promises of information interconnectedness, correlative science, and system interoperability. Shared ontologies are fundamental to fulfilling these promises. We present a tool framework, some informal principles, and several case studies where shared ontologies are used to guide the implementation of scientific digital libraries. The tool framework, based on an ontology modeling tool, was configured to develop, manage, and keep shared ontologies relevant within changing domains and to promote the interoperability, interconnectedness, and correlation desired by scientists.

A Self-Assessment Framework for Inclusive Schools Supporting Assistive Technology Users.

PubMed

Hoogerwerf, Evert-Jan; Solander-Gross, Andrea; Mavrou, Katerina; Traina, Ivan; Hersh, Marion

2017-01-01

In order to support schools to assess their performance in supporting children with disabilities in their ICT and ICT-AT needs, a self-assessment framework was developed by a task force of partners and associate partners of the ENTELIS project. The self-assessment tool aims to help educational establishments that welcome learners with disabilities to assess their current outcomes and to plan improvements in supporting these students in increasing digital literacy and developing digital skills. This includes the use of mainstream Information and Communication Technology (ICT) and specially designed digital Assistive Technologies (ICT-AT). This can only successfully happen if schools fully embrace an inclusive approach to education. In this paper the authors describe the development of the framework and the further steps for its use.

TECHNICAL DESIGN NOTE: Digital proportional-integral-derivative velocity controller of a Mössbauer spectrometer

NASA Astrophysics Data System (ADS)

Pechousek, J.; Prochazka, R.; Mashlan, M.; Jancik, D.; Frydrych, J.

2009-01-01

The digital proportional-integral-derivative (PID) velocity controller used in the Mössbauer spectrometer implemented in field programmable gate array (FPGA) is based on the National Instruments CompactRIO embedded system and LabVIEW graphical programming tools. The system works as a remote system accessible via the Ethernet. The digital controller operates in real-time conditions, and the maximum sampling frequency is approximately 227 kS s-1. The system was tested with standard sample measurements of α-Fe and α-57Fe2O3 on two different electromechanical velocity transducers. The nonlinearities of the velocity scales in the relative form are better than 0.2%. The replacement of the standard analog PID controller by the new system brings the possibility of optimizing the control process more precisely.

Visually enhanced CCTV digital surveillance utilizing Intranet and Internet.

PubMed

Ozaki, Nobuyuki

2002-07-01

This paper describes a solution for integrated plant supervision utilizing closed circuit television (CCTV) digital surveillance. Three basic requirements are first addressed as the platform of the system, with discussion on the suitable video compression. The system configuration is described in blocks. The system provides surveillance functionality: real-time monitoring, and process analysis functionality: a troubleshooting tool. This paper describes the formulation of practical performance design for determining various encoder parameters. It also introduces image processing techniques for enhancing the original CCTV digital image to lessen the burden on operators. Some screenshots are listed for the surveillance functionality. For the process analysis, an image searching filter supported by image processing techniques is explained with screenshots. Multimedia surveillance, which is the merger with process data surveillance, or the SCADA system, is also explained.

Digital Literacy in the Medical Curriculum: A Course With Social Media Tools and Gamification.

PubMed

Mesko, Bertalan; Győrffy, Zsuzsanna; Kollár, János

2015-10-01

The profession of practicing medicine is based on communication, and as social media and other digital technologies play a major role in today's communication, digital literacy must be included in the medical curriculum. The value of social media has been demonstrated several times in medicine and health care, therefore it is time to prepare medical students for the conditions they will have to face when they graduate. The aim of our study was to design a new e-learning-based curriculum and test it with medical students. An elective course was designed to teach students how to use the Internet, with a special emphasis on social media. An e-learning platform was also made available and students could access material about using digital technologies on the online platforms they utilized the most. All students filled in online surveys before and after the course in order to provide feedback about the curriculum. Over a 3-year period, 932 students completed the course. The course did not increase the number of hours spent online but aimed at making that time more efficient and useful. Based on the responses of students, they found the information provided by the curriculum useful for their studies and future practices. A well-designed course, improved by constant evaluation-based feedback, can be suitable for preparing students for the massive use of the Internet, social media platforms, and digital technologies. New approaches must be applied in modern medical education in order to teach students new skills. Such curriculums that put emphasis on reaching students on the online channels they use in their studies and everyday lives introduce them to the world of empowered patients and prepare them to deal with the digital world.

Digital Literacy in the Medical Curriculum: A Course With Social Media Tools and Gamification

PubMed Central

Győrffy, Zsuzsanna; Kollár, János

2015-01-01

Background The profession of practicing medicine is based on communication, and as social media and other digital technologies play a major role in today’s communication, digital literacy must be included in the medical curriculum. The value of social media has been demonstrated several times in medicine and health care, therefore it is time to prepare medical students for the conditions they will have to face when they graduate. Objective The aim of our study was to design a new e-learning-based curriculum and test it with medical students. Method An elective course was designed to teach students how to use the Internet, with a special emphasis on social media. An e-learning platform was also made available and students could access material about using digital technologies on the online platforms they utilized the most. All students filled in online surveys before and after the course in order to provide feedback about the curriculum. Results Over a 3-year period, 932 students completed the course. The course did not increase the number of hours spent online but aimed at making that time more efficient and useful. Based on the responses of students, they found the information provided by the curriculum useful for their studies and future practices. Conclusions A well-designed course, improved by constant evaluation-based feedback, can be suitable for preparing students for the massive use of the Internet, social media platforms, and digital technologies. New approaches must be applied in modern medical education in order to teach students new skills. Such curriculums that put emphasis on reaching students on the online channels they use in their studies and everyday lives introduce them to the world of empowered patients and prepare them to deal with the digital world. PMID:27731856

Digital footprints: facilitating large-scale environmental psychiatric research in naturalistic settings through data from everyday technologies

PubMed Central

Bidargaddi, N; Musiat, P; Makinen, V-P; Ermes, M; Schrader, G; Licinio, J

2017-01-01

Digital footprints, the automatically accumulated by-products of our technology-saturated lives, offer an exciting opportunity for psychiatric research. The commercial sector has already embraced the electronic trails of customers as an enabling tool for guiding consumer behaviour, and analogous efforts are ongoing to monitor and improve the mental health of psychiatric patients. The untargeted collection of digital footprints that may or may not be health orientated comprises a large untapped information resource for epidemiological scale research into psychiatric disorders. Real-time monitoring of mood, sleep and physical and social activity in a substantial portion of the affected population in a naturalistic setting is unprecedented in psychiatry. We propose that digital footprints can provide these measurements from real world setting unobtrusively and in a longitudinal fashion. In this perspective article, we outline the concept of digital footprints and the services and devices that create them, and present examples where digital footprints have been successfully used in research. We then critically discuss the opportunities and fundamental challenges associated digital footprints in psychiatric research, such as collecting data from different sources, analysis, ethical and research design challenges. PMID:27922603

Digital footprints: facilitating large-scale environmental psychiatric research in naturalistic settings through data from everyday technologies.

PubMed

Bidargaddi, N; Musiat, P; Makinen, V-P; Ermes, M; Schrader, G; Licinio, J

2017-02-01

Digital footprints, the automatically accumulated by-products of our technology-saturated lives, offer an exciting opportunity for psychiatric research. The commercial sector has already embraced the electronic trails of customers as an enabling tool for guiding consumer behaviour, and analogous efforts are ongoing to monitor and improve the mental health of psychiatric patients. The untargeted collection of digital footprints that may or may not be health orientated comprises a large untapped information resource for epidemiological scale research into psychiatric disorders. Real-time monitoring of mood, sleep and physical and social activity in a substantial portion of the affected population in a naturalistic setting is unprecedented in psychiatry. We propose that digital footprints can provide these measurements from real world setting unobtrusively and in a longitudinal fashion. In this perspective article, we outline the concept of digital footprints and the services and devices that create them, and present examples where digital footprints have been successfully used in research. We then critically discuss the opportunities and fundamental challenges associated digital footprints in psychiatric research, such as collecting data from different sources, analysis, ethical and research design challenges.

The use of self-organising maps for anomalous behaviour detection in a digital investigation.

PubMed

Fei, B K L; Eloff, J H P; Olivier, M S; Venter, H S

2006-10-16

The dramatic increase in crime relating to the Internet and computers has caused a growing need for digital forensics. Digital forensic tools have been developed to assist investigators in conducting a proper investigation into digital crimes. In general, the bulk of the digital forensic tools available on the market permit investigators to analyse data that has been gathered from a computer system. However, current state-of-the-art digital forensic tools simply cannot handle large volumes of data in an efficient manner. With the advent of the Internet, many employees have been given access to new and more interesting possibilities via their desktop. Consequently, excessive Internet usage for non-job purposes and even blatant misuse of the Internet have become a problem in many organisations. Since storage media are steadily growing in size, the process of analysing multiple computer systems during a digital investigation can easily consume an enormous amount of time. Identifying a single suspicious computer from a set of candidates can therefore reduce human processing time and monetary costs involved in gathering evidence. The focus of this paper is to demonstrate how, in a digital investigation, digital forensic tools and the self-organising map (SOM)--an unsupervised neural network model--can aid investigators to determine anomalous behaviours (or activities) among employees (or computer systems) in a far more efficient manner. By analysing the different SOMs (one for each computer system), anomalous behaviours are identified and investigators are assisted to conduct the analysis more efficiently. The paper will demonstrate how the easy visualisation of the SOM enhances the ability of the investigators to interpret and explore the data generated by digital forensic tools so as to determine anomalous behaviours.

Digital Tools and Solutions for Inquiry-Based STEM Learning

ERIC Educational Resources Information Center

Levin, Ilya, Ed.; Tsybulsky, Dina, Ed.

2017-01-01

In the digital age, the integration of technology has become a ubiquitous aspect of modern society. These advancements have significantly enhanced the field of education, allowing students to receive a better learning experience. "Digital Tools and Solutions for Inquiry-Based STEM Learning" is a comprehensive source of scholarly material…

Building Collective Leadership Capacity Using Collaborative Twenty-First Century Digital Tools

ERIC Educational Resources Information Center

James, Freddy; Figaro-Henry, Sandra

2017-01-01

The current research explores how using collaborative twenty-first century digital tools developed the collective leadership capacity among participants in an educational leadership course. A qualitative interpretive approach was used. The data show how learning within the digital collaborative spaces was multidirectional and enhanced the…

Psychological and Pedagogical Considerations in Digital Textbook Use and Development

ERIC Educational Resources Information Center

Railean, Elena

2015-01-01

With the emergence of digital tools into mainstream society, new applications for cutting-edge technologies enable innovations in the dissemination of information. Careful consideration of the impact of these tools is important to maximize benefits while avoiding misuse. "Psychological and Pedagogical Considerations in Digital Textbook Use…

The role of locally-designed organizational artifacts in supporting nurses’ work: an ethnographic study on the wards

PubMed

Talamo, Alessandra; Mellini, Barbara; Barbieri, Barbara

2017-01-01

This paper aims to describe how nurses' planning and coordination work is performed through the use of locally designed tools (i.e., diaries, planners, reminders, and organizers). These tools are investigated as the materialization of organizational work, thus offering a complementary perspective on nursing practice to that proposed by the professional mandate and supported by official artifacts in use. Ethnographic study. By analyzing locally designed artifacts, the rationale that enables nurses to make the flow of activities work is highlighted and explained. Evidence is provided by a description of how nurses' tacit knowledge is reified and embedded into objects produced by the nurses themselves. Implications for the design of digital systems supporting nursing practice are discussed. The analysis of these artifacts has allowed an understanding of practices used by the nurses to manage the workflow in the wards.

CARE 3 User's Workshop

NASA Technical Reports Server (NTRS)

1988-01-01

A user's workshop for CARE 3, a reliability assessment tool designed and developed especially for the evaluation of high reliability fault tolerant digital systems, was held at NASA Langley Research Center on October 6 to 7, 1987. The main purpose of the workshop was to assess the evolutionary status of CARE 3. The activities of the workshop are documented and papers are included by user's of CARE 3 and NASA. Features and limitations of CARE 3 and comparisons to other tools are presented. The conclusions to a workshop questionaire are also discussed.

Design for learning: deconstructing virtual patient activities.

PubMed

Ellaway, Rachel H; Davies, David

2011-01-01

Digital technologies are used in almost every aspect of contemporary health professional education (HPE) but our understanding of their true potential as instructional tools rather than administrative tools has not significantly advanced in the last decade. One notable exception to this has been the rise of the 'virtual patient' as an educational intervention in HPE. This article attempts to deconstruct the virtual patient concept by developing a model of virtual patients as artifacts with intrinsic encoded properties and emergent constructed properties that build on the core concept of 'activity'.

Assessment of using digital manipulation tools for diagnosing mandibular radiolucent lesions

PubMed Central

Raitz, R; Assunção Junior, JNR; Fenyo-Pereira, M; Correa, L; de Lima, LP

2012-01-01

Objective The purpose of this study was to analyse the use of digital tools for image enhancement of mandibular radiolucent lesions and the effects of this manipulation on the percentage of correct radiographic diagnoses. Methods 24 panoramic radiographs exhibiting radiolucent lesions were selected, digitized and evaluated by non-experts (undergraduate and newly graduated practitioners) and by professional experts in oral diagnosis. The percentages of correct and incorrect diagnoses, according to the use of brightness/contrast, sharpness, inversion, highlight and zoom tools, were compared. All dental professionals made their evaluations without (T1) and with (T2) a list of radiographic diagnostic parameters. Results Digital tools were used with low frequency mainly in T2. The most preferred tool was sharpness (45.2%). In the expert group, the percentage of correct diagnoses did not change when any of the digital tools were used. For the non-expert group, there was an increase in the frequency of correct diagnoses when brightness/contrast was used in T2 (p=0.008) and when brightness/contrast and sharpness were not used in T1 (p=0.027). The use or non-use of brightness/contrast, zoom and sharpness showed moderate agreement in the group of experts [kappa agreement coefficient (κ)=0.514, 0.425 and 0.335, respectively]. For the non-expert group there was slight agreement for all the tools used (κ≤0.237). Conclusions Consulting the list of radiographic parameters before image manipulation reduced the frequency of tool use in both groups of examiners. Consulting the radiographic parameters with the use of some digital tools was important for improving correct diagnosis only in the group of non-expert examiners. PMID:22116126

Assessment of using digital manipulation tools for diagnosing mandibular radiolucent lesions.

PubMed

Raitz, R; Assunção Junior, J N R; Fenyo-Pereira, M; Correa, L; de Lima, L P

2012-03-01

The purpose of this study was to analyse the use of digital tools for image enhancement of mandibular radiolucent lesions and the effects of this manipulation on the percentage of correct radiographic diagnoses. 24 panoramic radiographs exhibiting radiolucent lesions were selected, digitized and evaluated by non-experts (undergraduate and newly graduated practitioners) and by professional experts in oral diagnosis. The percentages of correct and incorrect diagnoses, according to the use of brightness/contrast, sharpness, inversion, highlight and zoom tools, were compared. All dental professionals made their evaluations without (T₁) and with (T₂) a list of radiographic diagnostic parameters. Digital tools were used with low frequency mainly in T₂. The most preferred tool was sharpness (45.2%). In the expert group, the percentage of correct diagnoses did not change when any of the digital tools were used. For the non-expert group, there was an increase in the frequency of correct diagnoses when brightness/contrast was used in T₂ (p=0.008) and when brightness/contrast and sharpness were not used in T₁ (p=0.027). The use or non-use of brightness/contrast, zoom and sharpness showed moderate agreement in the group of experts [kappa agreement coefficient (κ) = 0.514, 0.425 and 0.335, respectively]. For the non-expert group there was slight agreement for all the tools used (κ ≤ 0.237). Consulting the list of radiographic parameters before image manipulation reduced the frequency of tool use in both groups of examiners. Consulting the radiographic parameters with the use of some digital tools was important for improving correct diagnosis only in the group of non-expert examiners.

Full-field digital mammography image data storage reduction using a crop tool.

PubMed

Kang, Bong Joo; Kim, Sung Hun; An, Yeong Yi; Choi, Byung Gil

2015-05-01

The storage requirements for full-field digital mammography (FFDM) in a picture archiving and communication system are significant, so methods to reduce the data set size are needed. A FFDM crop tool for this purpose was designed, implemented, and tested. A total of 1,651 screening mammography cases with bilateral FFDMs were included in this study. The images were cropped using a DICOM editor while maintaining image quality. The cases were evaluated according to the breast volume (1/4, 2/4, 3/4, and 4/4) in the craniocaudal view. The image sizes between the cropped image group and the uncropped image group were compared. The overall image quality and reader's preference were independently evaluated by the consensus of two radiologists. Digital storage requirements for sets of four uncropped to cropped FFDM images were reduced by 3.8 to 82.9 %. The mean reduction rates according to the 1/4-4/4 breast volumes were 74.7, 61.1, 38, and 24 %, indicating that the lower the breast volume, the smaller the size of the cropped data set. The total image data set size was reduced from 87 to 36.7 GB, or a 57.7 % reduction. The overall image quality and the reader's preference for the cropped images were higher than those of the uncropped images. FFDM mammography data storage requirements can be significantly reduced using a crop tool.

Evaluating a digital ship design tool prototype: Designers' perceptions of novel ergonomics software.

PubMed

Mallam, Steven C; Lundh, Monica; MacKinnon, Scott N

2017-03-01

Computer-aided solutions are essential for naval architects to manage and optimize technical complexities when developing a ship's design. Although there are an array of software solutions aimed to optimize the human element in design, practical ergonomics methodologies and technological solutions have struggled to gain widespread application in ship design processes. This paper explores how a new ergonomics technology is perceived by naval architecture students using a mixed-methods framework. Thirteen Naval Architecture and Ocean Engineering Masters students participated in the study. Overall, results found participants perceived the software and its embedded ergonomics tools to benefit their design work, increasing their empathy and ability to understand the work environment and work demands end-users face. However, participant's questioned if ergonomics could be practically and efficiently implemented under real-world project constraints. This revealed underlying social biases and a fundamental lack of understanding in engineering postgraduate students regarding applied ergonomics in naval architecture. Copyright © 2016 Elsevier Ltd. All rights reserved.

A nanoliter volume nuclear magnetic resonance (NMR) system using tunneling magneto-resistive (TMR) sensors to recognize biomolecules

NASA Astrophysics Data System (ADS)

Gomez, Pablo

The need to incorporate advanced engineering tools in biology, biochemistry and medicine is in great demand. Many of the existing instruments and tools are usually expensive and require special facilities. With the advent of nanotechnology in the past decade, new approaches to develop devices and tools have been generated by academia and industry. One such technology, NMR spectroscopy, has been used by biochemists for more than 2 decades to study the molecular structure of chemical compounds. However, NMR spectrometers are very expensive and require special laboratory rooms for their proper operation. High magnetic fields with strengths in the order of several Tesla make these instruments unaffordable to most research groups. This doctoral research proposes a new technology to develop NMR spectrometers that can operate at field strengths of less than 0.5 Tesla using an inexpensive permanent magnet and spin dependent nanoscale magnetic devices. This portable NMR system is intended to analyze samples as small as a few nanoliters. The main problem to resolve when downscaling the variables is to obtain an NMR signal with high Signal-To-Noise-Ratio (SNR). A special Tunneling Magneto-Resistive (TMR) sensor design was developed to achieve this goal. The minimum specifications for each component of the proposed NMR system were established. A complete NMR system was designed based on these minimum requirements. The goat was always to find cost effective realistic components. The novel design of the NMR system uses technologies such as Direct Digital Synthesis (DDS), Digital Signal Processing (DSP) and a special Backpropagation Neural Network that finds the best match of the NMR spectrum. The system was designed, calculated and simulated with excellent results. In addition, a general method to design TMR Sensors was developed. The technique was automated and a computer program was written to help the designer perform this task interactively.

Engineering applications of metaheuristics: an introduction

NASA Astrophysics Data System (ADS)

Oliva, Diego; Hinojosa, Salvador; Demeshko, M. V.

2017-01-01

Metaheuristic algorithms are important tools that in recent years have been used extensively in several fields. In engineering, there is a big amount of problems that can be solved from an optimization point of view. This paper is an introduction of how metaheuristics can be used to solve complex problems of engineering. Their use produces accurate results in problems that are computationally expensive. Experimental results support the performance obtained by the selected algorithms in such specific problems as digital filter design, image processing and solar cells design.

Digital life storybooks for people with dementia living in care homes: an evaluation

PubMed Central

Subramaniam, Ponnusamy; Woods, Bob

2016-01-01

Background and aim There is increasing interest in using information and communication technology to help older adults with dementia to engage in reminiscence work. Now, the feasibility of such approaches is beginning to be established. The purpose of this study was to establish an evidence-base for the acceptability and efficacy of using multimedia digital life storybooks with people with dementia in care homes, in comparison with conventional life storybooks, taking into account the perspectives of people with dementia, their relatives, and care staff. Methods Participatory design was used to create a life story movie based on a previously completed conventional life storybook with six older adults with dementia (four females; mean age 82 years). Relatives were involved in helping the participant to provide additional information and materials for the digital life storybook. In this multiple case study design, both quantitative and qualitative approaches were used. For quantitative purposes, a set of questionnaires that had been completed three times before and after the conventional life storybook was developed were repeated 4 weeks after the life story movie was completed. Semistructured interview questions were designed to collect feedback from participants, relatives, and care staff. Results The result indicated that five of the six participants showed additional improvement in measures of quality of life and autobiographical memory. All participants showed improvement or stability in depression scores. Thematic analysis showed that, participants, relatives, and care home staff viewed digital life storybooks as a very useful tool triggering memories and (largely) positive emotions. Participants’ case vignettes were presented to document the impact of digital life storybook. PMID:27698556

Digital life storybooks for people with dementia living in care homes: an evaluation.

PubMed

Subramaniam, Ponnusamy; Woods, Bob

2016-01-01

There is increasing interest in using information and communication technology to help older adults with dementia to engage in reminiscence work. Now, the feasibility of such approaches is beginning to be established. The purpose of this study was to establish an evidence-base for the acceptability and efficacy of using multimedia digital life storybooks with people with dementia in care homes, in comparison with conventional life storybooks, taking into account the perspectives of people with dementia, their relatives, and care staff. Participatory design was used to create a life story movie based on a previously completed conventional life storybook with six older adults with dementia (four females; mean age 82 years). Relatives were involved in helping the participant to provide additional information and materials for the digital life storybook. In this multiple case study design, both quantitative and qualitative approaches were used. For quantitative purposes, a set of questionnaires that had been completed three times before and after the conventional life storybook was developed were repeated 4 weeks after the life story movie was completed. Semistructured interview questions were designed to collect feedback from participants, relatives, and care staff. The result indicated that five of the six participants showed additional improvement in measures of quality of life and autobiographical memory. All participants showed improvement or stability in depression scores. Thematic analysis showed that, participants, relatives, and care home staff viewed digital life storybooks as a very useful tool triggering memories and (largely) positive emotions. Participants' case vignettes were presented to document the impact of digital life storybook.

Health Technology Intervention After Hospitalization for Schizophrenia: Service Utilization and User Satisfaction.

PubMed

Baumel, Amit; Correll, Christoph U; Hauser, Marta; Brunette, Mary; Rotondi, Armando; Ben-Zeev, Dror; Gottlieb, Jennifer D; Mueser, Kim T; Achtyes, Eric D; Schooler, Nina R; Robinson, Delbert G; Gingerich, Susan; Marcy, Patricia; Meyer-Kalos, Piper; Kane, John M

2016-09-01

The authors examined patients' acceptance of the Health Technology Program (HTP), an integrative approach to relapse prevention after hospitalization of adults with schizophrenia or related disorders. The program combines use of digital tools with support from a mental health technology coach (MHTC). Patients with schizophrenia spectrum disorders received six months of treatment that began within 60 days of a psychiatric hospitalization and included the development of a personalized relapse prevention plan, three digital tools, and contacts with MHTCs. A total of 200 patients (mean±SD age=34.6±10.6 years) had 28.2±2.0 contacts with the MHTC that lasted 38.3±14.2 minutes. The most discussed topic was case management (52%), and digital tools were discussed in 45% of meetings. Altogether, 87% of patients used at least one of the digital tools, with 96% of patients rating the HTP as satisfying to at least some extent. These data suggest very high acceptance of the HTP, a program that integrates available human support with digital tools.

Stereoscopic display of 3D models for design visualization

NASA Astrophysics Data System (ADS)

Gilson, Kevin J.

2006-02-01

Advances in display technology and 3D design visualization applications have made real-time stereoscopic visualization of architectural and engineering projects a reality. Parsons Brinkerhoff (PB) is a transportation consulting firm that has used digital visualization tools from their inception and has helped pioneer the application of those tools to large scale infrastructure projects. PB is one of the first Architecture/Engineering/Construction (AEC) firms to implement a CAVE- an immersive presentation environment that includes stereoscopic rear-projection capability. The firm also employs a portable stereoscopic front-projection system, and shutter-glass systems for smaller groups. PB is using commercial real-time 3D applications in combination with traditional 3D modeling programs to visualize and present large AEC projects to planners, clients and decision makers in stereo. These presentations create more immersive and spatially realistic presentations of the proposed designs. This paper will present the basic display tools and applications, and the 3D modeling techniques PB is using to produce interactive stereoscopic content. The paper will discuss several architectural and engineering design visualizations we have produced.

Assessing Digital Humanities Tools: Use of Scalar at a Research University

ERIC Educational Resources Information Center

Tracy, Daniel G.

2016-01-01

As librarians increasingly support digital publication platforms, they must also understand the user experience of these tools. This case study assesses use of Scalar, a digital humanities publishing platform for media-rich projects, at the University of Illinois at Urbana-Champaign. Based on a survey, interviews, and content analysis, the study…

Enhancing Scientific Practice and Education through Collaborative Digital Libraries.

ERIC Educational Resources Information Center

Maini, Gaurav; Leggett, John J.; Ong, Teongjoo; Wilson, Hugh D.; Reed, Monique D.; Hatch, Stephan L.; Dawson, John E.

The need for accurate and current scientific information in the fast paced Internet-aware world has prompted the scientific community to develop tools that reduce the scientist's time and effort to make digital information available to all interested parties. The availability of such tools has made the Internet a vast digital repository of…

Digital Literacy Matters: Increasing Workforce Productivity through Blended English Language Programs

ERIC Educational Resources Information Center

Jose, Kshema

2016-01-01

Current workplace demands newer forms of literacies that go beyond the ability to decode print. These involve not only competence to operate digital tools, but also the ability to create, represent, and share meaning in different modes and formats; ability to interact, collaborate and communicate effectively using digital tools, and engage…

Small Wonders Close Encounters

ERIC Educational Resources Information Center

Kniseley, MacGregor; Capraro, Karen

2013-01-01

This article introduces students to the world of digital microscopy. Looking at small objects through a digital microscope is like traveling through a foreign country for the first time. The experience is new, engaging, and exciting. A handheld digital microscope is an essential tool in a 21st century teacher's toolkit and the perfect tool to…

Automatic Design of Digital Synthetic Gene Circuits

PubMed Central

Marchisio, Mario A.; Stelling, Jörg

2011-01-01

De novo computational design of synthetic gene circuits that achieve well-defined target functions is a hard task. Existing, brute-force approaches run optimization algorithms on the structure and on the kinetic parameter values of the network. However, more direct rational methods for automatic circuit design are lacking. Focusing on digital synthetic gene circuits, we developed a methodology and a corresponding tool for in silico automatic design. For a given truth table that specifies a circuit's input–output relations, our algorithm generates and ranks several possible circuit schemes without the need for any optimization. Logic behavior is reproduced by the action of regulatory factors and chemicals on the promoters and on the ribosome binding sites of biological Boolean gates. Simulations of circuits with up to four inputs show a faithful and unequivocal truth table representation, even under parametric perturbations and stochastic noise. A comparison with already implemented circuits, in addition, reveals the potential for simpler designs with the same function. Therefore, we expect the method to help both in devising new circuits and in simplifying existing solutions. PMID:21399700

[Three-dimensional computer aided design for individualized post-and-core restoration].

PubMed

Gu, Xiao-yu; Wang, Ya-ping; Wang, Yong; Lü, Pei-jun

2009-10-01

To develop a method of three-dimensional computer aided design (CAD) of post-and-core restoration. Two plaster casts with extracted natural teeth were used in this study. The extracted teeth were prepared and scanned using tomography method to obtain three-dimensional digitalized models. According to the basic rules of post-and-core design, posts, cores and cavity surfaces of the teeth were designed using the tools for processing point clouds, curves and surfaces on the forward engineering software of Tanglong prosthodontic system. Then three-dimensional figures of the final restorations were corrected according to the configurations of anterior teeth, premolars and molars respectively. Computer aided design of 14 post-and-core restorations were finished, and good fitness between the restoration and the three-dimensional digital models were obtained. Appropriate retention forms and enough spaces for the full crown restorations can be obtained through this method. The CAD of three-dimensional figures of the post-and-core restorations can fulfill clinical requirements. Therefore they can be used in computer-aided manufacture (CAM) of post-and-core restorations.

Fracture Systems - Digital Field Data Capture

NASA Astrophysics Data System (ADS)

Haslam, Richard

2017-04-01

Fracture systems play a key role in subsurface resources and developments including groundwater and nuclear waste repositories. There is increasing recognition that there is a need to record and quantify fracture systems to better understand the potential risks and opportunities. With the advent of smart phones and digital field geology there have been numerous systems designed for field data collection. Digital field data collection allows for rapid data collection and interpretations. However, many of the current systems have principally been designed to cover the full range of field mapping and data needs, making them large and complex, plus many do not offer the tools necessary for the collection of fracture specific data. A new multiplatform data recording app has been developed for the collection of field data on faults and joint/fracture systems and a relational database designed for storage and retrieval. The app has been developed to collect fault data and joint/fracture data based on an open source platform. Data is captured in a form-based approach including validity checks to ensure data is collected systematically. In addition to typical structural data collection, the International Society of Rock Mechanics' (ISRM) "Suggested Methods for the Quantitative Description of Discontinuities in Rock Masses" is included allowing for industry standards to be followed and opening up the tools to industry as well as research. All data is uploaded automatically to a secure server and users can view their data and open access data as required. Users can decide if the data they produce should remain private or be open access. A series of automatic reports can be produced and/or the data downloaded. The database will hold a national archive and data retrieval will be made through a web interface.

Study of a direct visualization display tool for space applications

NASA Astrophysics Data System (ADS)

Pereira do Carmo, J.; Gordo, P. R.; Martins, M.; Rodrigues, F.; Teodoro, P.

2017-11-01

The study of a Direct Visualization Display Tool (DVDT) for space applications is reported. The review of novel technologies for a compact display tool is described. Several applications for this tool have been identified with the support of ESA astronauts and are presented. A baseline design is proposed. It consists mainly of OLEDs as image source; a specially designed optical prism as relay optics; a Personal Digital Assistant (PDA), with data acquisition card, as control unit; and voice control and simplified keyboard as interfaces. Optical analysis and the final estimated performance are reported. The system is able to display information (text, pictures or/and video) with SVGA resolution directly to the astronaut using a Field of View (FOV) of 20x14.5 degrees. The image delivery system is a monocular Head Mounted Display (HMD) that weights less than 100g. The HMD optical system has an eye pupil of 7mm and an eye relief distance of 30mm.

E-Inclusion: Social Inclusion of Young Adults with Intellectual Disabilities - A Participatory Design.

PubMed

Louw, Julia S

2017-01-01

By examining the role of digital tools and social media, this paper discusses an innovative prospective research study to enhance social inclusion of young adults with intellectual disabilities (ID). The paper begins with an overview of how individuals with disabilities have historically been excluded from society based on limited access and minimal opportunities afforded to them. Next, the paper presents the caveats that may hinder the improvement of social inclusion of young adults with ID and the oversights when developing digital technologies. Details about a prospective intervention research study are described that include a mobile application and a social media component. Finally, implications for research and practice are highlighted to emphasize the fundamental call for an insightful deliberation of these caveats that needs to be addressed in the design of a research study of this nature.

3D measurement by digital photogrammetry

NASA Astrophysics Data System (ADS)

Schneider, Carl T.

1993-12-01

Photogrammetry is well known in geodetic surveys as aerial photogrammetry or close range applications as architectural photogrammetry. The photogrammetric methods and algorithms combined with digital cameras and digital image processing methods are now introduced for industrial applications as automation and quality control. The presented paper will describe the photogrammetric and digital image processing algorithms and the calibration methods. These algorithms and methods were demonstrated with application examples. These applications are a digital photogrammetric workstation as a mobil multi purpose 3D measuring tool and a tube measuring system as an example for a single purpose tool.

Remote assessment of acne: the use of acne grading tools to evaluate digital skin images.

PubMed

Bergman, Hagit; Tsai, Kenneth Y; Seo, Su-Jean; Kvedar, Joseph C; Watson, Alice J

2009-06-01

Digital imaging of dermatology patients is a novel approach to remote data collection. A number of assessment tools have been developed to grade acne severity and to track clinical progress over time. Although these tools have been validated when used in a face-to-face setting, their efficacy and reliability when used to assess digital images have not been examined. The main purpose of this study was to determine whether specific assessment tools designed to grade acne during face-to-face visits can be applied to the evaluation of digital images. The secondary purpose was to ascertain whether images obtained by subjects are of adequate quality to allow such assessments to be made. Three hundred (300) digital images of patients with mild to moderate facial inflammatory acne from an ongoing randomized-controlled study were included in this analysis. These images were obtained from 20 patients and consisted of sets of 3 images taken over time. Of these images, 120 images were captured by subjects themselves and 180 were taken by study staff. Subjects were asked to retake their photographs if the initial images were deemed of poor quality by study staff. Images were evaluated by two dermatologists-in-training using validated acne assessment measures: Total Inflammatory Lesion Count, Leeds technique, and the Investigator's Global Assessment. Reliability of raters was evaluated using correlation coefficients and kappa statistics. Of the different acne assessment measures tested, the inter-rater reliability was highest for the total inflammatory lesion count (r = 0.871), but low for the Leeds technique (kappa = 0.381) and global assessment (kappa = 0.3119). Raters were able to evaluate over 89% of all images using each type of acne assessment measure despite the fact that images obtained by study staff were of higher quality than those obtained by patients (p < 0.001). Several existing clinical assessment measures can be used to evaluate digital images obtained from subjects with inflammatory acne lesions. The level of inter-rater agreement is highly variable across assessment measures, and we found the Total Inflammatory Lesion Count to be the most reliable. This measure could be used to allow a dermatologist to remotely track a patient's progress over time.

Solutions to Challenges Facing a University Digital Library and Press

PubMed Central

D'Alessandro, Michael P.; Galvin, Jeffrey R.; Colbert, Stephana I.; D'Alessandro, Donna M.; Choi, Teresa A.; Aker, Brian D.; Carlson, William S.; Pelzer, Gay D.

2000-01-01

During the creation of a university digital library and press intended to serve as a medical reference and education tool for health care providers and their patients, six distinct and complex digital publishing challenges were encountered. Over nine years, through a multidisciplinary approach, solutions were devised to the challenges of digital content ownership, management, mirroring, translation, interactions with users, and archiving. The result is a unique, author-owned, internationally mirrored, university digital library and press that serves as an authoritative medical reference and education tool for users around the world. The purpose of this paper is to share the valuable digital publishing lessons learned and outline the challenges facing university digital libraries and presses. PMID:10833161

Novel Tool for Complete Digitization of Paper Electrocardiography Data

PubMed Central

Harless, Chris; Shah, Amit J.; Wick, Carson A.; Mcclellan, James H.

2013-01-01

Objective: We present a Matlab-based tool to convert electrocardiography (ECG) information from paper charts into digital ECG signals. The tool can be used for long-term retrospective studies of cardiac patients to study the evolving features with prognostic value. Methods and procedures: To perform the conversion, we: 1) detect the graphical grid on ECG charts using grayscale thresholding; 2) digitize the ECG signal based on its contour using a column-wise pixel scan; and 3) use template-based optical character recognition to extract patient demographic information from the paper ECG in order to interface the data with the patients' medical record. To validate the digitization technique: 1) correlation between the digital signals and signals digitized from paper ECG are performed and 2) clinically significant ECG parameters are measured and compared from both the paper-based ECG signals and the digitized ECG. Results: The validation demonstrates a correlation value of 0.85–0.9 between the digital ECG signal and the signal digitized from the paper ECG. There is a high correlation in the clinical parameters between the ECG information from the paper charts and digitized signal, with intra-observer and inter-observer correlations of 0.8–0.9 \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{upgreek} \\usepackage{mathrsfs} \\setlength{\\oddsidemargin}{-69pt} \\begin{document} }{}$({\\rm p}<{0.05})$\\end{document}, and kappa statistics ranging from 0.85 (inter-observer) to 1.00 (intra-observer). Conclusion: The important features of the ECG signal, especially the QRST complex and the associated intervals, are preserved by obtaining the contour from the paper ECG. The differences between the measures of clinically important features extracted from the original signal and the reconstructed signal are insignificant, thus highlighting the accuracy of this technique. Clinical impact: Using this type of ECG digitization tool to carry out retrospective studies on large databases, which rely on paper ECG records, studies of emerging ECG features can be performed. In addition, this tool can be used to potentially integrate digitized ECG information with digital ECG analysis programs and with the patient's electronic medical record. PMID:26594601

The Relationship between Individual Characteristics and Ideation Behavior: An Empirical Study of Storyboards

ERIC Educational Resources Information Center

Teng, Pei-Shan; Cai, Dengchuan; Yu, Tai-Kuei

2014-01-01

The development of digital technology tool and the progress of animation design activities have led to great progress in the animation field. The storyboard is a type of media used to present animator ideas. Therefore, it is commonly viewed as fundamental to the animation industry. This study aims to discuss cognitive style- and gender-based…

The Magic Bullet: A Tool for Assessing and Evaluating Learning Potential in Games

ERIC Educational Resources Information Center

Becker, Katrin

2011-01-01

This paper outlines a simple and effective model that can be used to evaluate and design educational digital games. It also facilitates the formulation of strategies for using existing games in learning contexts. The model categorizes game goals and learning objectives into one or more of four possible categories. An overview of the model is…

Squaring Literacy Assessment with Multimodal Design: An Analytic Case for Semiotic Awareness

ERIC Educational Resources Information Center

Towndrow, Phillip A.; Nelson, Mark Evan; Yusuf, Wan Fareed Bin Mohamed

2013-01-01

Over the past few decades, there has been a marked shift away from conceptualizing literacy as a functional skill set toward its recognition, particularly for children and youth, as a social achievement that is buttressed, in part, by access to digital tools and new media. Yet, beyond the mere consumption of multimedia and the mundane assemblage…

Examining a Massive Multiplayer Online Role-Playing Game as a Digital Game-Based Learning Platform

ERIC Educational Resources Information Center

Wu, Min Lun; Richards, Kari; Saw, Guan Kung

2014-01-01

A concurrent triangulation mixed-method research design was used to investigate 19 casual gamers' or non-gamers' use of a popular massive multiplayer online role-playing game (MMORPG), Everquest 2, as an alternative pedagogical tool to support communicative use of the English language. This study poses that MMORPGs could serve as a virtually rich…

Community of Inquiry Development in a Blended Learning Course for In-Service Teachers

ERIC Educational Resources Information Center

Theodosiadou, Dimitra; Konstantinidis, Angelos; Pappos, Christos; Papadopoulos, Nikos

2017-01-01

The paper presents the course design and evaluation methods of an online community of inquiry that is developed in a blended learning training course for in-service teachers working in public K-6 schools in Greece. The course content is about digital storytelling, its educational value, and the use of supportive web 2.0 tools for developing…

An Electromagnetic Tool for Damping and Fatigue Analysis

DTIC Science & Technology

2004-03-01

Serway , Raymond A . Physics For Scientists & Engineers (3rd Edition). Philadelphia: Saunders College Publishing, 1990. 15. Kurtus, Ron...system was initially designed to reduce the time and manpower required to characterize damping treatments. It is based on a digitally controlled...the capability to study fatigue under a free boundary condition. The system consists of a test specimen suspended by a pendulum to closely

Making Meaningful Decisions about Time, Workload and Pedagogy in the Digital Age: The Course Resource Appraisal Model

ERIC Educational Resources Information Center

Kennedy, Eileen; Laurillard, Diana; Horan, Bernard; Charlton, Patricia

2015-01-01

This article reports on a design-based research project to create a modelling tool to analyse the costs and learning benefits involved in different modes of study. The Course Resource Appraisal Model (CRAM) provides accurate cost-benefit information so that institutions are able to make more meaningful decisions about which kind of…

A tool to enhance occupational therapy reasoning from ICF perspective: The Hasselt Occupational Performance Profile (H-OPP).

PubMed

Ghysels, R; Vanroye, E; Westhovens, M; Spooren, A

2017-03-01

In order to enhance occupational therapy reasoning in clinical practice, different elements such as client-centred approach, evidence-based care and interdisciplinary work should be taken into account, but is a challenge. To describe the development of the digital Hasselt Occupational Performance Profile (H-OPP © ) that enhances occupational therapy reasoning from ICF perspective. A participative qualitative design was used to create the H-OPP © in an iterative way in which occupational therapy lectures, ICF experts, students and occupational therapists in the field were involved. After linking occupational therapy terminology to the ICF, different stages of the H-OPP were identified and elaborated with main features: generating an occupational performance profile based on inventarization of problems and possibilities, formulating an occupational performance diagnosis and enabling to create an intervention plan. In all stages, both the perspectives of the client and the occupational therapist were taken into account. To increase practical use, the tool was further elaborated and digitalized. The H-OPP © is a digital coach that guides and facilitates professional reasoning in (novice) occupational therapists. It augments involvement of the client system. Furthermore, it enhances interdisciplinary communication and evidence-based care.

Technology Tools to Support Reading in the Digital Age

ERIC Educational Resources Information Center

Biancarosa, Gina; Griffiths, Gina G.

2012-01-01

Advances in digital technologies are dramatically altering the texts and tools available to teachers and students. These technological advances have created excitement among many for their potential to be used as instructional tools for literacy education. Yet with the promise of these advances come issues that can exacerbate the literacy…

Web Surveys to Digital Movies: Technological Tools of the Trade.

ERIC Educational Resources Information Center

Fetterman, David M.

2002-01-01

Highlights some of the technological tools used by educational researchers today, focusing on data collection related tools such as Web surveys, digital photography, voice recognition and transcription, file sharing and virtual office, videoconferencing on the Internet, instantaneous chat and chat rooms, reporting and dissemination, and digital…

Digi Island: A Serious Game for Teaching and Learning Digital Circuit Optimization

NASA Technical Reports Server (NTRS)

Harper, Michael; Miller, Joseph; Shen, Yuzhong

2011-01-01

Karnaugh maps, also known as K-maps, are a tool used to optimize or simplify digital logic circuits. A K-map is a graphical display of a logic circuit. K-map optimization is essentially the process of finding a minimum number of maximal aggregations of K-map cells. with values of 1 according to a set of rules. The Digi Island is a serious game designed for aiding students to learn K-map optimization. The game takes place on an exotic island (called Digi Island) in the Pacific Ocean . The player is an adventurer to the Digi Island and will transform it into a tourist attraction by developing real estates, such as amusement parks.and hotels. The Digi Island game elegantly converts boring 1s and Os in digital circuits into usable and unusable spaces on a beautiful island and transforms K-map optimization into real estate development, an activity with which many students are familiar and also interested in. This paper discusses the design, development, and some preliminary results of the Digi Island game.

The Instructional Instrument SL-EDGE Student Library-Educational DiGital Environment.

ERIC Educational Resources Information Center

Kyriakopoulou, Antonia; Kalamboukis, Theodore

An educational digital environment that will provide appropriate methods and techniques for the support and enhancement of the educational and learning process is a valuable tool for both educators and learners. In the context of such a mission, the educational tool SL-EDGE (Student Library-Educational DiGital Environment) has been developed. The…

The Toolbox for Local and Global Plagiarism Detection

ERIC Educational Resources Information Center

Butakov, Sergey; Scherbinin, Vladislav

2009-01-01

Digital plagiarism is a problem for educators all over the world. There are many software tools on the market for uncovering digital plagiarism. Most of them can work only with text submissions. In this paper, we present a new architecture for a plagiarism detection tool that can work with many different kinds of digital submissions, from plain or…

Toward a New Approach to the Evaluation of a Digital Curriculum Using Learning Analytics

ERIC Educational Resources Information Center

Rangel, Virginia Snodgrass; Bell, Elizabeth R.; Monroy, Carlos; Whitaker, J. Reid

2015-01-01

Understanding how an educational intervention is implemented is essential to evaluating its effectiveness. With the increased use of digital tools in classrooms, however, traditional methods of measuring implementation fall short. Fortunately, there is a way to learn about the interactions that users have with digital tools that are embedded into…

A Planning Cycle for Integrating Digital Technology into Literacy Instruction

ERIC Educational Resources Information Center

Hutchison, Amy; Woodward, Lindsay

2014-01-01

With the adoption of the Common Core State Standards by most states, the use of digital tools in literacy and language arts instruction has become of critical importance to educators. These changes produce a need for a better understanding of how literacy and language arts teachers can successfully integrate digital tools into their instruction…

Digital Technology Snapshot of the Literacy and Essential Skills Field 2013. Summary Report

ERIC Educational Resources Information Center

Trottier, Vicki

2013-01-01

From January to March 2013, "Canadian Literacy and Learning Network" (CLLN) conducted a snapshot to provide information about how digital technology tools are being used in the Literacy and Essential Skills (L/ES) field. The snapshot focused primarily on digital tools and activities that meet the organizational needs of provincial and…

Digital Doctorates? An Exploratory Study of PhD Candidates' Use of Online Tools

ERIC Educational Resources Information Center

Dowling, Robyn; Wilson, Michael

2017-01-01

Online environments are transforming learning, including doctoral education. Yet the ways in which the PhD experience is shaped and transformed through these digital modes of engagement is seldom addressed, and not systematically understood. In this article, we explore PhD students' perceptions and use of digital tools. Drawing on the results of…

English Digital Dictionaries as Valuable Blended Learning Tools for Palestinian College Students

ERIC Educational Resources Information Center

Dwaik, Raghad A. A.

2015-01-01

Digital technology has become an indispensable aspect of foreign language learning around the globe especially in the case of college students who are often required to finish extensive reading assignments within a limited time period. Such pressure calls for the use of efficient tools such as digital dictionaries to help them achieve their…

PPM Receiver Implemented in Software

NASA Technical Reports Server (NTRS)

Gray, Andrew; Kang, Edward; Lay, Norman; Vilnrotter, Victor; Srinivasan, Meera; Lee, Clement

2010-01-01

A computer program has been written as a tool for developing optical pulse-position- modulation (PPM) receivers in which photodetector outputs are fed to analog-to-digital converters (ADCs) and all subsequent signal processing is performed digitally. The program can be used, for example, to simulate an all-digital version of the PPM receiver described in Parallel Processing of Broad-Band PPM Signals (NPO-40711), which appears elsewhere in this issue of NASA Tech Briefs. The program can also be translated into a design for digital PPM receiver hardware. The most notable innovation embodied in the software and the underlying PPM-reception concept is a digital processing subsystem that performs synchronization of PPM time slots, even though the digital processing is, itself, asynchronous in the sense that no attempt is made to synchronize it with the incoming optical signal a priori and there is no feedback to analog signal processing subsystems or ADCs. Functions performed by the software receiver include time-slot synchronization, symbol synchronization, coding preprocessing, and diagnostic functions. The program is written in the MATLAB and Simulink software system. The software receiver is highly parameterized and, hence, programmable: for example, slot- and symbol-synchronization filters have programmable bandwidths.

A review on digital ECG formats and the relationships between them.

PubMed

Trigo, Jesús Daniel; Alesanco, Alvaro; Martínez, Ignacio; García, José

2012-05-01

A plethora of digital ECG formats have been proposed and implemented. This heterogeneity hinders the design and development of interoperable systems and entails critical integration issues for the healthcare information systems. This paper aims at performing a comprehensive overview on the current state of affairs of the interoperable exchange of digital ECG signals. This includes 1) a review on existing digital ECG formats, 2) a collection of applications and cardiology settings using such formats, 3) a compilation of the relationships between such formats, and 4) a reflection on the current situation and foreseeable future of the interoperable exchange of digital ECG signals. The objectives have been approached by completing and updating previous reviews on the topic through appropriate database mining. 39 digital ECG formats, 56 applications, tools or implantation experiences, 47 mappings/converters, and 6 relationships between such formats have been found in the literature. The creation and generalization of a single standardized ECG format is a desirable goal. However, this unification requires political commitment and international cooperation among different standardization bodies. Ongoing ontology-based approaches covering ECG domain have recently emerged as a promising alternative for reaching fully fledged ECG interoperability in the near future.

Understanding the Physical Optics Phenomena by Using a Digital Application for Light Propagation

NASA Astrophysics Data System (ADS)

Sierra-Sosa, Daniel-Esteban; Ángel-Toro, Luciano

2011-01-01

Understanding the light propagation on the basis of the Huygens-Fresnel principle stands for a fundamental factor for deeper comprehension of different physical optics related phenomena like diffraction, self-imaging, image formation, Fourier analysis and spatial filtering. This constitutes the physical approach of the Fourier optics whose principles and applications have been developed since the 1950's. Both for analytical and digital applications purposes, light propagation can be formulated in terms of the Fresnel Integral Transform. In this work, a digital optics application based on the implementation of the Discrete Fresnel Transform (DFT), and addressed to serve as a tool for applications in didactics of optics is presented. This tool allows, at a basic and intermediate learning level, exercising with the identification of basic phenomena, and observing changes associated with modifications of physical parameters. This is achieved by using a friendly graphic user interface (GUI). It also assists the user in the development of his capacity for abstracting and predicting the characteristics of more complicated phenomena. At an upper level of learning, the application could be used to favor a deeper comprehension of involved physics and models, and experimenting with new models and configurations. To achieve this, two characteristics of the didactic tool were taken into account when designing it. First, all physical operations, ranging from simple diffraction experiments to digital holography and interferometry, were developed on the basis of the more fundamental concept of light propagation. Second, the algorithm was conceived to be easily upgradable due its modular architecture based in MATLAB® software environment. Typical results are presented and briefly discussed in connection with didactics of optics.

Evaluation of a Digital Companion for Older Adults with Mild Cognitive Impairment

PubMed Central

Demiris, George; Thompson, Hilaire J.; Lazar, Amanda; Lin, Shih-Yin

2016-01-01

Study Objective: The purpose of this study was to examine the feasibility of a digital companion system used by older adults with mild cognitive impairment (MCI). We utilized a commercially available system that is comprehensive in its functionalities (including conversation ability, use of pictures and other media, and reminders) to explore the system’s impact on older adults ‘ social interactions, anxiety, depressive symptoms, and acceptance of the system. Study Design: We conducted a three-month mixed methods evaluation study of the digital companion. Results: Ten female community-dwelling older adults (average age 78.3 years) participated in the study. Overall, participants utilized the tool regularly and appreciated its presence and their interactions. Participants scored higher at the end of the study in cognition and social support scales, and lower in presence of depressive symptoms. Conclusion: Findings indicate the feasibility of a digital companion for people with MCI and inform the need for additional research. PMID:28269845

Operational viewpoint of the X-29A digital flight control system

NASA Technical Reports Server (NTRS)

Chacon, Vince; Mcbride, David

1988-01-01

In the past few years many flight control systems have been implemented as full-authority, full-time digital systems. The digital design has allowed flight control systems to make use of many enhanced elements that are generally considered too complex to implement in an analog system. Examples of these elements are redundant information exchanged between channels to allow for continued operation after multiple failures and multiple variable gain schedules to optimize control of the aircraft throughout its flight envelope and in all flight modes. The introduction of the digital system for flight control also created the problem of obtaining information from the system in an understandable and useful format. This paper presents how the X-29A was dealt with during its operations at NASA Ames-Dryden Flight Research Facility. A brief description of the X-29A control system, a discussion of the tools developed to aid in daily operations, and the troubleshooting of the aircraft are included.

A computer program for processing impedance cardiographic data: Improving accuracy through user-interactive software

NASA Technical Reports Server (NTRS)

Cowings, Patricia S.; Naifeh, Karen; Thrasher, Chet

1988-01-01

This report contains the source code and documentation for a computer program used to process impedance cardiography data. The cardiodynamic measures derived from impedance cardiography are ventricular stroke column, cardiac output, cardiac index and Heather index. The program digitizes data collected from the Minnesota Impedance Cardiograph, Electrocardiography (ECG), and respiratory cycles and then stores these data on hard disk. It computes the cardiodynamic functions using interactive graphics and stores the means and standard deviations of each 15-sec data epoch on floppy disk. This software was designed on a Digital PRO380 microcomputer and used version 2.0 of P/OS, with (minimally) a 4-channel 16-bit analog/digital (A/D) converter. Applications software is written in FORTRAN 77, and uses Digital's Pro-Tool Kit Real Time Interface Library, CORE Graphic Library, and laboratory routines. Source code can be readily modified to accommodate alternative detection, A/D conversion and interactive graphics. The object code utilizing overlays and multitasking has a maximum of 50 Kbytes.

Why Aren't Our Digital Solutions Working for Everyone?

PubMed

Winkle, Brian Van; Carpenter, Neil; Moscucci, Mauro

2017-11-01

The article explores a digital injustice that is occurring across the country: that digital solutions intended to increase health care access and quality often neglect those that need them most. It further shows that when it comes to digital innovation, health care professionals and technology companies rarely have any incentives to focus on underserved populations. Nevertheless, we argue that the technologies that are leaving these communities behind are the same ones that can best support them. The key is in leveraging these technologies with: (a) design features that accommodate various levels of technological proficiency (e-literacy), (b) tech-enabled community health workers and navigators who can function as liaisons between patients and clinicians, and (c) analytics and customer relationship management tools that enable health care professionals and support networks to provide the right interventions to the right patients. Finally, we argue that community health care workers will need to be incentivized to play a larger role in building and adopting innovations targeting the underserved. © 2017 American Medical Association. All Rights Reserved.

The virtual digital nuclear power plant: A modern tool for supporting the lifecycle of VVER-based nuclear power units

NASA Astrophysics Data System (ADS)

Arkadov, G. V.; Zhukavin, A. P.; Kroshilin, A. E.; Parshikov, I. A.; Solov'ev, S. L.; Shishov, A. V.

2014-10-01

The article describes the "Virtual Digital VVER-Based Nuclear Power Plant" computerized system comprising a totality of verified initial data (sets of input data for a model intended for describing the behavior of nuclear power plant (NPP) systems in design and emergency modes of their operation) and a unified system of new-generation computation codes intended for carrying out coordinated computation of the variety of physical processes in the reactor core and NPP equipment. Experiments with the demonstration version of the "Virtual Digital VVER-Based NPP" computerized system has shown that it is in principle possible to set up a unified system of computation codes in a common software environment for carrying out interconnected calculations of various physical phenomena at NPPs constructed according to the standard AES-2006 project. With the full-scale version of the "Virtual Digital VVER-Based NPP" computerized system put in operation, the concerned engineering, design, construction, and operating organizations will have access to all necessary information relating to the NPP power unit project throughout its entire lifecycle. The domestically developed commercial-grade software product set to operate as an independently operating application to the project will bring about additional competitive advantages in the modern market of nuclear power technologies.

Creation of a 3-dimensional virtual dental patient for computer-guided surgery and CAD-CAM interim complete removable and fixed dental prostheses: A clinical report.

PubMed

Harris, Bryan T; Montero, Daniel; Grant, Gerald T; Morton, Dean; Llop, Daniel R; Lin, Wei-Shao

2017-02-01

This clinical report proposes a digital workflow using 2-dimensional (2D) digital photographs, a 3D extraoral facial scan, and cone beam computed tomography (CBCT) volumetric data to create a 3D virtual patient with craniofacial hard tissue, remaining dentition (including surrounding intraoral soft tissue), and the realistic appearance of facial soft tissue at an exaggerated smile under static conditions. The 3D virtual patient was used to assist the virtual diagnostic tooth arrangement process, providing patient with a pleasing preoperative virtual smile design that harmonized with facial features. The 3D virtual patient was also used to gain patient's pretreatment approval (as a communication tool), design a prosthetically driven surgical plan for computer-guided implant surgery, and fabricate the computer-aided design and computer-aided manufacturing (CAD-CAM) interim prostheses. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

An Optimized Three-Level Design of Decoder Based on Nanoscale Quantum-Dot Cellular Automata

NASA Astrophysics Data System (ADS)

Seyedi, Saeid; Navimipour, Nima Jafari

2018-03-01

Quantum-dot Cellular Automata (QCA) has been potentially considered as a supersede to Complementary Metal-Oxide-Semiconductor (CMOS) because of its inherent advantages. Many QCA-based logic circuits with smaller feature size, improved operating frequency, and lower power consumption than CMOS have been offered. This technology works based on electron relations inside quantum-dots. Due to the importance of designing an optimized decoder in any digital circuit, in this paper, we design, implement and simulate a new 2-to-4 decoder based on QCA with low delay, area, and complexity. The logic functionality of the 2-to-4 decoder is verified using the QCADesigner tool. The results have shown that the proposed QCA-based decoder has high performance in terms of a number of cells, covered area, and time delay. Due to the lower clock pulse frequency, the proposed 2-to-4 decoder is helpful for building QCA-based sequential digital circuits with high performance.

Evaluating the Effectiveness of Web-based Climate Resilience Decision Support Tools: Insights from Coastal New Jersey

NASA Astrophysics Data System (ADS)

Brady, M.; Lathrop, R.; Auermuller, L. M.; Leichenko, R.

2016-12-01

Despite the recent surge of Web-based decision support tools designed to promote resiliency in U.S. coastal communities, to-date there has been no systematic study of their effectiveness. This study demonstrates a method to evaluate important aspects of effectiveness of four Web map tools designed to promote consideration of climate risk information in local decision-making and planning used in coastal New Jersey. In summer 2015, the research team conducted in-depth phone interviews with users of one regulatory and three non-regulatory Web map tools using a semi-structured questionnaire. The interview and analysis design drew from a combination of effectiveness evaluation approaches developed in software and information usability, program evaluation, and management information system (MIS) research. Effectiveness assessment results were further analyzed and discussed in terms of conceptual hierarchy of system objectives defined by respective tool developer and user organizations represented in the study. Insights from the interviews suggest that users rely on Web tools as a supplement to desktop and analog map sources because they provide relevant and up-to-date information in a highly accessible and mobile format. The users also reported relying on multiple information sources and comparison between digital and analog sources for decision support. However, with respect to this decision support benefit, users were constrained by accessibility factors such as lack of awareness and training with some tools, lack of salient information such as planning time horizons associated with future flood scenarios, and environmental factors such as mandates restricting some users to regulatory tools. Perceptions of Web tool credibility seem favorable overall, but factors including system design imperfections and inconsistencies in data and information across platforms limited trust, highlighting a need for better coordination between tools. Contributions of the study include user feedback on web-tool system designs consistent with collaborative methods for enhancing usability and a systematic look at effectiveness that includes both user perspectives and consideration of developer and organizational objectives.

Optimal CCD readout by digital correlated double sampling

NASA Astrophysics Data System (ADS)

Alessandri, C.; Abusleme, A.; Guzman, D.; Passalacqua, I.; Alvarez-Fontecilla, E.; Guarini, M.

2016-01-01

Digital correlated double sampling (DCDS), a readout technique for charge-coupled devices (CCD), is gaining popularity in astronomical applications. By using an oversampling ADC and a digital filter, a DCDS system can achieve a better performance than traditional analogue readout techniques at the expense of a more complex system analysis. Several attempts to analyse and optimize a DCDS system have been reported, but most of the work presented in the literature has been experimental. Some approximate analytical tools have been presented for independent parameters of the system, but the overall performance and trade-offs have not been yet modelled. Furthermore, there is disagreement among experimental results that cannot be explained by the analytical tools available. In this work, a theoretical analysis of a generic DCDS readout system is presented, including key aspects such as the signal conditioning stage, the ADC resolution, the sampling frequency and the digital filter implementation. By using a time-domain noise model, the effect of the digital filter is properly modelled as a discrete-time process, thus avoiding the imprecision of continuous-time approximations that have been used so far. As a result, an accurate, closed-form expression for the signal-to-noise ratio at the output of the readout system is reached. This expression can be easily optimized in order to meet a set of specifications for a given CCD, thus providing a systematic design methodology for an optimal readout system. Simulated results are presented to validate the theory, obtained with both time- and frequency-domain noise generation models for completeness.

The Comprehensive Evaluation of Electronic Learning Tools and Educational Software (CEELTES)

ERIC Educational Resources Information Center

Karolcík, Štefan; Cipková, Elena; Hrušecký, Roman; Veselský, Milan

2015-01-01

Despite the fact that digital technologies are more and more used in the learning and education process, there is still lack of professional evaluation tools capable of assessing the quality of used digital teaching aids in a comprehensive and objective manner. Construction of the Comprehensive Evaluation of Electronic Learning Tools and…

Teachers' Views on Digital Educational Tools in English Language Learning: Benefits and Challenges in the Turkish Context

ERIC Educational Resources Information Center

Çelik, Servet; Aytin, Kübra

2014-01-01

Despite the clear benefits provided by digital educational tools, Turkish teachers of English as a foreign language (EFL) are often seen as failing to take advantage of computing technologies in the classroom. Deficiencies in terms of teachers' digital literacies are often faulted for this omission. The majority of studies concerning Turkish EFL…

Innovate Literacy Instruction with a Classroom Computer: A Solid Rationale for the Integration of Specific Digital Tools

ERIC Educational Resources Information Center

McAdams, Laurie

2013-01-01

The digital age has impacted education and how teachers prepare students to master 21st century literacies. Numerous national, state, and local entities have made the integration of technology into the literacy curriculum a priority, and teachers are becoming more proficient with their use of digital tools. However, integrating technology to…

The Impact of Digital Tools on Student Writing and How Writing Is Taught in Schools

ERIC Educational Resources Information Center

Purcell, Kristen; Buchanan, Judy; Friedrich, Linda

2013-01-01

A survey of 2,462 Advanced Placement (AP) and National Writing Project (NWP) teachers finds that digital technologies are shaping student writing in myriad ways and have also become helpful tools for teaching writing to middle and high school students. These teachers see the internet and digital technologies such as social networking sites, cell…

Anthropometry of Brazilian Air Force pilots.

PubMed

da Silva, Gilvan V; Halpern, Manny; Gordon, Claire C

2017-10-01

Anthropometric data are essential for the design of military equipment including sizing of aircraft cockpits and personal gear. Currently, there are no anthropometric databases specific to Brazilian military personnel. The aim of this study was to create a Brazilian anthropometric database of Air Force pilots. The methods, protocols, descriptions, definitions, landmarks, tools and measurements procedures followed the instructions outlined in Measurer's Handbook: US Army and Marine Corps Anthropometric Surveys, 2010-2011 - NATICK/TR-11/017. The participants were measured countrywide, in all five Brazilian Geographical Regions. Thirty-nine anthropometric measurements related to cockpit design were selected. The results of 2133 males and 206 females aged 16-52 years constitute a set of basic data for cockpit design, space arrangement issues and adjustments, protective gear and equipment design, as well as for digital human modelling. Another important implication is that this study can be considered a starting point for reducing gender bias in women's career as pilots. Practitioner Summary: This paper describes the first large-scale anthropometric survey of the Brazilian Air Force pilots and the development of the related database. This study provides critical data for improving aircraft cockpit design for ergonomics and comprehensive pilot accommodation, protective gear and uniform design, as well as digital human modelling.

Parametric and Generative Design Techniques for Digitalization in Building Industry: the Case Study of Glued- Laminated-Timber Industry

NASA Astrophysics Data System (ADS)

Pasetti Monizza, G.; Matt, D. T.; Benedetti, C.

2016-11-01

According to Wortmann classification, the Building Industry (BI) can be defined as engineer-to-order (ETO) industry: the engineering-process starts only when an order is acquired. This definition implies that every final product (building) is almost unique’ and processes cannot be easily standardized or automated. Because of this, BI is one of the less efficient industries today’ mostly leaded by craftsmanship. In the last years’ several improvements in process efficiency have been made focusing on manufacturing and installation processes only. In order to improve the efficiency of design and engineering processes as well, the scientific community agrees that the most fruitful strategy should be Front-End Design (FED). Nevertheless, effective techniques and tools are missing. This paper discusses outcomes of a research activity that aims at highlighting whether Parametric and Generative Design techniques allow reducing wastes of resources and improving the overall efficiency of the BI, by pushing the Digitalization of design and engineering processes of products. Focusing on the Glued-Laminated-Timber industry, authors will show how Parametric and Generative Design techniques can be introduced in a standard supply-chain system, highlighting potentials and criticism on the supply-chain system as a whole.

The networked student: A design-based research case study of student constructed personal learning environments in a middle school science course

NASA Astrophysics Data System (ADS)

Drexler, Wendy

This design-based research case study applied a networked learning approach to a seventh grade science class at a public school in the southeastern United States. Students adapted emerging Web applications to construct personal learning environments for in-depth scientific inquiry of poisonous and venomous life forms. The personal learning environments constructed used Application Programming Interface (API) widgets to access, organize, and synthesize content from a number of educational Internet resources and social network connections. This study examined the nature of personal learning environments; the processes students go through during construction, and patterns that emerged. The project was documented from both an instructional and student-design perspective. Findings revealed that students applied the processes of: practicing digital responsibility; practicing digital literacy; organizing content; collaborating and socializing; and synthesizing and creating. These processes informed a model of the networked student that will serve as a framework for future instructional designs. A networked learning approach that incorporates these processes into future designs has implications for student learning, teacher roles, professional development, administrative policies, and delivery. This work is significant in that it shifts the focus from technology innovations based on tools to student empowerment based on the processes required to support learning. It affirms the need for greater attention to digital literacy and responsibility in K12 schools as well as consideration for those skills students will need to achieve success in the 21st century. The design-based research case study provides a set of design principles for teachers to follow when facilitating student construction of personal learning environments.

A mobile clinical e-portfolio for nursing and medical students, using wireless personal digital assistants (PDAs).

PubMed

Garrett, Bernard Mark; Jackson, Cathryn

2006-12-01

This paper outlines the development and evaluation of a wireless personal digital assistant (PDA) based clinical learning tool designed to promote professional reflection for health professionals. The "Clinical e-portfolio" was developed at the University of British Columbia School of Nursing to enable students immediately to access clinical expertise and resources remotely, and record their clinical experiences in a variety of media (text, audio and images). The PDA e-portfolio tool was developed to demonstrate the potential use of mobile networked technologies to support and improve clinical learning; promote reflective learning in practice; engage students in the process of knowledge translation; help contextualize and embed clinical knowledge whilst in the workplace; and to help prevent the isolation of students whilst engaged in supervised clinical practice. The mobile e-portfolio was developed to synchronise wirelessly with a user's personal Web based portfolio from any remote location where a cellular telephone signal or wireless (Wi-Fi) connection could be obtained. An evaluation of the tool was undertaken with nurse practitioner and medical students, revealing positive attitudes to the use of PDA based tools and portfolios, but limits to the use of the PDA portfolio due to the inherent interface restrictions of the PDA.

Digital Platform for Wafer-Level MEMS Testing and Characterization Using Electrical Response

PubMed Central

Brito, Nuno; Ferreira, Carlos; Alves, Filipe; Cabral, Jorge; Gaspar, João; Monteiro, João; Rocha, Luís

2016-01-01

The uniqueness of microelectromechanical system (MEMS) devices, with their multiphysics characteristics, presents some limitations to the borrowed test methods from traditional integrated circuits (IC) manufacturing. Although some improvements have been performed, this specific area still lags behind when compared to the design and manufacturing competencies developed over the last decades by the IC industry. A complete digital solution for fast testing and characterization of inertial sensors with built-in actuation mechanisms is presented in this paper, with a fast, full-wafer test as a leading ambition. The full electrical approach and flexibility of modern hardware design technologies allow a fast adaptation for other physical domains with minimum effort. The digital system encloses a processor and the tailored signal acquisition, processing, control, and actuation hardware control modules, capable of the structure position and response analysis when subjected to controlled actuation signals in real time. The hardware performance, together with the simplicity of the sequential programming on a processor, results in a flexible and powerful tool to evaluate the newest and fastest control algorithms. The system enables measurement of resonant frequency (Fr), quality factor (Q), and pull-in voltage (Vpi) within 1.5 s with repeatability better than 5 ppt (parts per thousand). A full-wafer with 420 devices under test (DUTs) has been evaluated detecting the faulty devices and providing important design specification feedback to the designers. PMID:27657087

Digital Platform for Wafer-Level MEMS Testing and Characterization Using Electrical Response.

PubMed

Brito, Nuno; Ferreira, Carlos; Alves, Filipe; Cabral, Jorge; Gaspar, João; Monteiro, João; Rocha, Luís

2016-09-21

The uniqueness of microelectromechanical system (MEMS) devices, with their multiphysics characteristics, presents some limitations to the borrowed test methods from traditional integrated circuits (IC) manufacturing. Although some improvements have been performed, this specific area still lags behind when compared to the design and manufacturing competencies developed over the last decades by the IC industry. A complete digital solution for fast testing and characterization of inertial sensors with built-in actuation mechanisms is presented in this paper, with a fast, full-wafer test as a leading ambition. The full electrical approach and flexibility of modern hardware design technologies allow a fast adaptation for other physical domains with minimum effort. The digital system encloses a processor and the tailored signal acquisition, processing, control, and actuation hardware control modules, capable of the structure position and response analysis when subjected to controlled actuation signals in real time. The hardware performance, together with the simplicity of the sequential programming on a processor, results in a flexible and powerful tool to evaluate the newest and fastest control algorithms. The system enables measurement of resonant frequency (Fr), quality factor (Q), and pull-in voltage (Vpi) within 1.5 s with repeatability better than 5 ppt (parts per thousand). A full-wafer with 420 devices under test (DUTs) has been evaluated detecting the faulty devices and providing important design specification feedback to the designers.

Design and Testing of Space Telemetry SCA Waveform

NASA Technical Reports Server (NTRS)

Mortensen, Dale J.; Handler, Louis M.; Quinn, Todd M.

2006-01-01

A Software Communications Architecture (SCA) Waveform for space telemetry is being developed at the NASA Glenn Research Center (GRC). The space telemetry waveform is implemented in a laboratory testbed consisting of general purpose processors, field programmable gate arrays (FPGAs), analog-to-digital converters (ADCs), and digital-to-analog converters (DACs). The radio hardware is integrated with an SCA Core Framework and other software development tools. The waveform design is described from both the bottom-up signal processing and top-down software component perspectives. Simulations and model-based design techniques used for signal processing subsystems are presented. Testing with legacy hardware-based modems verifies proper design implementation and dynamic waveform operations. The waveform development is part of an effort by NASA to define an open architecture for space based reconfigurable transceivers. Use of the SCA as a reference has increased understanding of software defined radio architectures. However, since space requirements put a premium on size, mass, and power, the SCA may be impractical for today s space ready technology. Specific requirements for an SCA waveform and other lessons learned from this development are discussed.

VLSI Implementation of Fault Tolerance Multiplier based on Reversible Logic Gate

NASA Astrophysics Data System (ADS)

Ahmad, Nabihah; Hakimi Mokhtar, Ahmad; Othman, Nurmiza binti; Fhong Soon, Chin; Rahman, Ab Al Hadi Ab

2017-08-01

Multiplier is one of the essential component in the digital world such as in digital signal processing, microprocessor, quantum computing and widely used in arithmetic unit. Due to the complexity of the multiplier, tendency of errors are very high. This paper aimed to design a 2×2 bit Fault Tolerance Multiplier based on Reversible logic gate with low power consumption and high performance. This design have been implemented using 90nm Complemetary Metal Oxide Semiconductor (CMOS) technology in Synopsys Electronic Design Automation (EDA) Tools. Implementation of the multiplier architecture is by using the reversible logic gates. The fault tolerance multiplier used the combination of three reversible logic gate which are Double Feynman gate (F2G), New Fault Tolerance (NFT) gate and Islam Gate (IG) with the area of 160μm x 420.3μm (67.25 mm2). This design achieved a low power consumption of 122.85μW and propagation delay of 16.99ns. The fault tolerance multiplier proposed achieved a low power consumption and high performance which suitable for application of modern computing as it has a fault tolerance capabilities.

Organizing Chaos: The Tactical Assault Kit Collaborative Mission Planner

DTIC Science & Technology

2018-12-01

choice. Case studies , such as the 2017 Presidential Inauguration Collective Security Event, Operation Flaming Sword 2017, and the counter-ISIS campaign...rallied around the Tactical Assault Kit (TAK) as their mission command tool of choice. Case studies , such as the 2017 Presidential Inauguration...authorities ADA Air Defense Artillery ADM Army Design Methodology ADAPT Advanced Digital Advisor Partner Technologies ATAK Android Tactical Assault Kit

A Study on the Use of a Metadata Schema for Characterizing School Education STEM Lessons Plans by STEM Teachers

ERIC Educational Resources Information Center

Zervas, Panagiotis; Tsourlidaki, Eleftheria; Cao, Yiwei; Sotiriou, Sofoklis; Sampson, Demetrios G.; Faltin, Nils

2016-01-01

Online labs (OLs) constitute digital educational tools which can have a significant role in supporting science, technology, engineering and mathematics (STEM) teachers in their daily teaching practice. Designing STEM lessons supported by specific OLs is a challenging task and thus, it is useful for STEM teachers to be able to share their lesson…

Development of a Comprehensive Digital Avionics Curriculum for the Aeronautical Engineer

DTIC Science & Technology

2006-03-01

able to analyze and design aircraft and missile guidance and control systems, including feedback stabilization schemes and stochastic processes, using ...Uncertainty modeling for robust control; Robust closed-loop stability and performance; Robust H- infinity control; Robustness check using mu-analysis...Controlled feedback (reduces noise) 3. Statistical group response (reduce pressure toward conformity) When used as a tool to study a complex problem

An Analytic Creativity Assessment Scale for Digital Game Story Design: Construct Validity, Internal Consistency and Interrater Reliability

ERIC Educational Resources Information Center

Chuang, Tsung-Yen; Huang, Yun-Hsuan

2015-01-01

Mobile technology has rapidly made digital games a popular entertainment to this digital generation, and thus digital game design received considerable attention in both the game industry and design education. Digital game design involves diverse dimensions in which digital game story design (DGSD) particularly attracts our interest, as the…

Design of a Digital-Based, Multicomponent Nutrition Guidance System for Prevention of Early Childhood Obesity

PubMed Central

Black, Maureen M.; Saavedra, Jose M.

2016-01-01

Interventions targeting parenting focused modifiable factors to prevent obesity and promote healthy growth in the first 1000 days of life are needed. Scale-up of interventions to global populations is necessary to reverse trends in weight status among infants and toddlers, and large scale dissemination will require understanding of effective strategies. Utilizing nutrition education theories, this paper describes the design of a digital-based nutrition guidance system targeted to first-time mothers to prevent obesity during the first two years. The multicomponent system consists of scientifically substantiated content, tools, and telephone-based professional support delivered in an anticipatory and sequential manner via the internet, email, and text messages, focusing on educational modules addressing the modifiable factors associated with childhood obesity. Digital delivery formats leverage consumer media trends and provide the opportunity for scale-up, unavailable to previous interventions reliant on resource heavy clinic and home-based counseling. Designed initially for use in the United States, this system's core features are applicable to all contexts and constitute an approach fostering healthy growth, not just obesity prevention. The multicomponent features, combined with a global concern for optimal growth and positive trends in mobile internet use, represent this system's future potential to affect change in nutrition practice in developing countries. PMID:27635257

Property-Based Monitoring of Analog and Mixed-Signal Systems

NASA Astrophysics Data System (ADS)

Havlicek, John; Little, Scott; Maler, Oded; Nickovic, Dejan

In the recent past, there has been a steady growth of the market for consumer embedded devices such as cell phones, GPS and portable multimedia systems. In embedded systems, digital, analog and software components are combined on a single chip, resulting in increasingly complex designs that introduce richer functionality on smaller devices. As a consequence, the potential insertion of errors into a design becomes higher, yielding an increasing need for automated analog and mixed-signal validation tools. In the purely digital setting, formal verification based on properties expressed in industrial specification languages such as PSL and SVA is nowadays successfully integrated in the design flow. On the other hand, the validation of analog and mixed-signal systems still largely depends on simulation-based, ad-hoc methods. In this tutorial, we consider some ingredients of the standard verification methodology that can be successfully exported from digital to analog and mixed-signal setting, in particular property-based monitoring techniques. Property-based monitoring is a lighter approach to the formal verification, where the system is seen as a "black-box" that generates sets of traces, whose correctness is checked against a property, that is its high-level specification. Although incomplete, monitoring is effectively used to catch faults in systems, without guaranteeing their full correctness.

Can Digital Tools Be Used for Improving Immunization Programs?

PubMed

Tozzi, Alberto E; Gesualdo, Francesco; D'Ambrosio, Angelo; Pandolfi, Elisabetta; Agricola, Eleonora; Lopalco, Pierluigi

2016-01-01

In order to successfully control and eliminate vaccine-preventable infectious diseases, an appropriate vaccine coverage has to be achieved and maintained. This task requires a high level of effort as it may be compromised by a number of barriers. Public health agencies have issued specific recommendations to address these barriers and therefore improve immunization programs. In the present review, we characterize issues and challenges of immunization programs for which digital tools are a potential solution. In particular, we explore previously published research on the use of digital tools in the following vaccine-related areas: immunization registries, dose tracking, and decision support systems; vaccine-preventable diseases surveillance; surveillance of adverse events following immunizations; vaccine confidence monitoring; and delivery of information on vaccines to the public. Subsequently, we analyze the limits of the use of digital tools in such contexts and envision future possibilities and challenges.

Can Digital Tools Be Used for Improving Immunization Programs?

PubMed Central

Tozzi, Alberto E.; Gesualdo, Francesco; D’Ambrosio, Angelo; Pandolfi, Elisabetta; Agricola, Eleonora; Lopalco, Pierluigi

2016-01-01

In order to successfully control and eliminate vaccine-preventable infectious diseases, an appropriate vaccine coverage has to be achieved and maintained. This task requires a high level of effort as it may be compromised by a number of barriers. Public health agencies have issued specific recommendations to address these barriers and therefore improve immunization programs. In the present review, we characterize issues and challenges of immunization programs for which digital tools are a potential solution. In particular, we explore previously published research on the use of digital tools in the following vaccine-related areas: immunization registries, dose tracking, and decision support systems; vaccine-preventable diseases surveillance; surveillance of adverse events following immunizations; vaccine confidence monitoring; and delivery of information on vaccines to the public. Subsequently, we analyze the limits of the use of digital tools in such contexts and envision future possibilities and challenges. PMID:27014673

Using software simulators to enhance the learning of digital logic design for the information technology students

NASA Astrophysics Data System (ADS)

Alsadoon, Abeer; Prasad, P. W. C.; Beg, Azam

2017-09-01

Making the students understand the theoretical concepts of digital logic design concepts is one of the major issues faced by the academics, therefore the teachers have tried different techniques to link the theoretical information to the practical knowledge. Use of software simulations is a technique for learning and practice that can be applied to many different disciplines. Experimentation of different computer hardware components/integrated circuits with the use of the simulators enhances the student learning. The simulators can be rather simplistic or quite complex. This paper reports our evaluation of different simulators available for use in the higher education institutions. We also provide the experience of incorporating some selected tools in teaching introductory courses in computer systems. We justified the effectiveness of incorporating the simulators into the computer system courses by use of student survey and final grade results.

Digital detection of endonuclease mediated gene disruption in the HIV provirus

PubMed Central

Sedlak, Ruth Hall; Liang, Shu; Niyonzima, Nixon; De Silva Feelixge, Harshana S.; Roychoudhury, Pavitra; Greninger, Alexander L.; Weber, Nicholas D.; Boissel, Sandrine; Scharenberg, Andrew M.; Cheng, Anqi; Magaret, Amalia; Bumgarner, Roger; Stone, Daniel; Jerome, Keith R.

2016-01-01

Genome editing by designer nucleases is a rapidly evolving technology utilized in a highly diverse set of research fields. Among all fields, the T7 endonuclease mismatch cleavage assay, or Surveyor assay, is the most commonly used tool to assess genomic editing by designer nucleases. This assay, while relatively easy to perform, provides only a semi-quantitative measure of mutation efficiency that lacks sensitivity and accuracy. We demonstrate a simple droplet digital PCR assay that quickly quantitates a range of indel mutations with detection as low as 0.02% mutant in a wild type background and precision (≤6%CV) and accuracy superior to either mismatch cleavage assay or clonal sequencing when compared to next-generation sequencing. The precision and simplicity of this assay will facilitate comparison of gene editing approaches and their optimization, accelerating progress in this rapidly-moving field. PMID:26829887

ARIES: Enabling Visual Exploration and Organization of Art Image Collections.

PubMed

Crissaff, Lhaylla; Wood Ruby, Louisa; Deutch, Samantha; DuBois, R Luke; Fekete, Jean-Daniel; Freire, Juliana; Silva, Claudio

2018-01-01

Art historians have traditionally used physical light boxes to prepare exhibits or curate collections. On a light box, they can place slides or printed images, move the images around at will, group them as desired, and visual-ly compare them. The transition to digital images has rendered this workflow obsolete. Now, art historians lack well-designed, unified interactive software tools that effectively support the operations they perform with physi-cal light boxes. To address this problem, we designed ARIES (ARt Image Exploration Space), an interactive image manipulation system that enables the exploration and organization of fine digital art. The system allows images to be compared in multiple ways, offering dynamic overlays analogous to a physical light box, and sup-porting advanced image comparisons and feature-matching functions, available through computational image processing. We demonstrate the effectiveness of our system to support art historians tasks through real use cases.

Image based automatic water meter reader

NASA Astrophysics Data System (ADS)

Jawas, N.; Indrianto

2018-01-01

Water meter is used as a tool to calculate water consumption. This tool works by utilizing water flow and shows the calculation result with mechanical digit counter. Practically, in everyday use, an operator will manually check the digit counter periodically. The Operator makes logs of the number shows by water meter to know the water consumption. This manual operation is time consuming and prone to human error. Therefore, in this paper we propose an automatic water meter digit reader from digital image. The digits sequence is detected by utilizing contour information of the water meter front panel.. Then an OCR method is used to get the each digit character. The digit sequence detection is an important part of overall process. It determines the success of overall system. The result shows promising results especially in sequence detection.

Digital Storytelling: A Powerful Technology Tool for the 21st Century Classroom

ERIC Educational Resources Information Center

Robin, Bernard R.

2008-01-01

Digital storytelling has emerged over the last few years as a powerful teaching and learning tool that engages both teachers and their students. However, until recently, little attention has been paid to a theoretical framework that could be employed to increase the effectiveness of technology as a tool in a classroom environment. A discussion of…

Slowmation: A Twenty-First Century Educational Tool for Science and Mathematics Pre-Service Teachers

ERIC Educational Resources Information Center

Paige, Kathryn; Bentley, Brendan; Dobson, Stephen

2016-01-01

Slowmation is a twenty-first century digital literacy educational tool. This teaching and learning tool has been incorporated as an assessment strategy in the curriculum area of science and mathematics with pre-service teachers (PSTs). This paper explores two themes: developing twenty-first century digital literacy skills and modelling best…

Fast Assessments with Digital Tools Using Multiple-Choice Questions

ERIC Educational Resources Information Center

Howell, Dusti D.; Tseng, Daphne ChingYu; Colorado-Resa, Jozenia T.

2017-01-01

Multiple Choice Questions (MCQs) have come a long way since they were used in "The Kansas Silent Reading Test" in 1915. After over 100 years of MCQs, new innovative digital tools using this form of assessment can help foster interactivity in today's classrooms. This article describes three free online MCQ tools that are relatively quick…

Digital Mental Health - Innovations in Consumer Driven Care.

PubMed

Ackerman, Mary Lou; Virani, Tazim; Billings, Barry

2017-01-01

Barriers such as stigma and access issues prevent 60% of Canadians with mental health issues from seeking help. Saint Elizabeth Health Care's IntelligentCare™ Platform supports a range of digital health solutions for holistic health including three specific innovations: a secure social networking tool, an artificial intelligence-driven assistant that uses conversational cognitive behaviour therapy techniques, and a mobile mindfulness meditation application that generates personalized meditation suggestions. People use these self-help tools to cope with their mental health challenges. Healthcare providers are encouraged to explore the benefits and drawbacks of digital solutions for mental health, and consider the new skills, ethical implications and research opportunities that are needed when supporting patients who use these digital tools. © 2017 Longwoods Publishing.

Cell Libraries

NASA Technical Reports Server (NTRS)

1994-01-01

A NASA contract led to the development of faster and more energy efficient semiconductor materials for digital integrated circuits. Gallium arsenide (GaAs) conducts electrons 4-6 times faster than silicon and uses less power at frequencies above 100-150 megahertz. However, the material is expensive, brittle, fragile and has lacked computer automated engineering tools to solve this problem. Systems & Processes Engineering Corporation (SPEC) developed a series of GaAs cell libraries for cell layout, design rule checking, logic synthesis, placement and routing, simulation and chip assembly. The system is marketed by Compare Design Automation.

Bunch-by-bunch detection of coherent transverse modes from digitized single-bpm signals in the Tevatron

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stancari, G.; Valishev, A.; Semenov, A.

2010-05-01

A system was developed for bunch-by-bunch detection of transverse proton and antiproton coherent oscillations based on the signal from a single beam-position monitor (BPM) located in a region of the ring with large amplitude functions. The signal is digitized over a large number of turns and Fourier-analyzed offline with a dedicated algorithm. To enhance the signal, the beam is excited with band-limited noise for about one second, and this was shown not to significantly affect the circulating beams even at high luminosity. The system is used to measure betatron tunes of individual bunches and to study beam-beam effects. In particular,more » it is one of the main diagnostic tools in an ongoing study of nonlinear beam-beam compensation studies with Gaussian electron lenses. We present the design and operation of this tool, together with results obtained with proton and antiproton bunches.« less

Development of an interactive anatomical three-dimensional eye model.

PubMed

Allen, Lauren K; Bhattacharyya, Siddhartha; Wilson, Timothy D

2015-01-01

The discrete anatomy of the eye's intricate oculomotor system is conceptually difficult for novice students to grasp. This is problematic given that this group of muscles represents one of the most common sites of clinical intervention in the treatment of ocular motility disorders and other eye disorders. This project was designed to develop a digital, interactive, three-dimensional (3D) model of the muscles and cranial nerves of the oculomotor system. Development of the 3D model utilized data from the Visible Human Project (VHP) dataset that was refined using multiple forms of 3D software. The model was then paired with a virtual user interface in order to create a novel 3D learning tool for the human oculomotor system. Development of the virtual eye model was done while attempting to adhere to the principles of cognitive load theory (CLT) and the reduction of extraneous load in particular. The detailed approach, digital tools employed, and the CLT guidelines are described herein. © 2014 American Association of Anatomists.

Optical Density Analysis of X-Rays Utilizing Calibration Tooling to Estimate Thickness of Parts

NASA Technical Reports Server (NTRS)

Grau, David

2012-01-01

This process is designed to estimate the thickness change of a material through data analysis of a digitized version of an x-ray (or a digital x-ray) containing the material (with the thickness in question) and various tooling. Using this process, it is possible to estimate a material's thickness change in a region of the material or part that is thinner than the rest of the reference thickness. However, that same principle process can be used to determine the thickness change of material using a thinner region to determine thickening, or it can be used to develop contour plots of an entire part. Proper tooling must be used. An x-ray film with an S-shaped characteristic curve or a digital x-ray device with a product resulting in like characteristics is necessary. If a film exists with linear characteristics, this type of film would be ideal; however, at the time of this reporting, no such film has been known. Machined components (with known fractional thicknesses) of a like material (similar density) to that of the material to be measured are necessary. The machined components should have machined through-holes. For ease of use and better accuracy, the throughholes should be a size larger than 0.125 in. (.3 mm). Standard components for this use are known as penetrameters or image quality indicators. Also needed is standard x-ray equipment, if film is used in place of digital equipment, or x-ray digitization equipment with proven conversion properties. Typical x-ray digitization equipment is commonly used in the medical industry, and creates digital images of x-rays in DICOM format. It is recommended to scan the image in a 16-bit format. However, 12-bit and 8-bit resolutions are acceptable. Finally, x-ray analysis software that allows accurate digital image density calculations, such as Image-J freeware, is needed. The actual procedure requires the test article to be placed on the raw x-ray, ensuring the region of interest is aligned for perpendicular x-ray exposure capture. One or multiple machined components of like material/ density with known thicknesses are placed atop the part (preferably in a region of nominal and non-varying thickness) such that exposure of the combined part and machined component lay-up is captured on the x-ray. Depending on the accuracy required, the machined component fs thickness must be carefully chosen. Similarly, depending on the accuracy required, the lay-up must be exposed such that the regions of the x-ray to be analyzed have a density range between 1 and 4.5. After the exposure, the image is digitized, and the digital image can then be analyzed using the image analysis software.

Digital Core Modelling for Clastic Oil and Gas Reservoir

NASA Astrophysics Data System (ADS)

Belozerov, I.; Berezovsky, V.; Gubaydullin, M.; Yur’ev, A.

2018-05-01

"Digital core" is a multi-purpose tool for solving a variety of tasks in the field of geological exploration and production of hydrocarbons at various stages, designed to improve the accuracy of geological study of subsurface resources, the efficiency of reproduction and use of mineral resources, as well as applying the results obtained in production practice. The actuality of the development of the "Digital core" software is that even a partial replacement of natural laboratory experiments with mathematical modelling can be used in the operative calculation of reserves in exploratory drilling, as well as in the absence of core material from wells. Or impossibility of its research by existing laboratory methods (weakly cemented, loose, etc. rocks). 3D-reconstruction of the core microstructure can be considered as a cheap and least time-consuming method for obtaining petrophysical information about the main filtration-capacitive properties and fluid motion in reservoir rocks.

Digital optical tomography system for dynamic breast imaging

NASA Astrophysics Data System (ADS)

Flexman, Molly L.; Khalil, Michael A.; Al Abdi, Rabah; Kim, Hyun K.; Fong, Christopher J.; Desperito, Elise; Hershman, Dawn L.; Barbour, Randall L.; Hielscher, Andreas H.

2011-07-01

Diffuse optical tomography has shown promising results as a tool for breast cancer screening and monitoring response to chemotherapy. Dynamic imaging of the transient response of the breast to an external stimulus, such as pressure or a respiratory maneuver, can provide additional information that can be used to detect tumors. We present a new digital continuous-wave optical tomography system designed to simultaneously image both breasts at fast frame rates and with a large number of sources and detectors. The system uses a master-slave digital signal processor-based detection architecture to achieve a dynamic range of 160 dB and a frame rate of 1.7 Hz with 32 sources, 64 detectors, and 4 wavelengths per breast. Included is a preliminary study of one healthy patient and two breast cancer patients showing the ability to identify an invasive carcinoma based on the hemodynamic response to a breath hold.

A digital future for the history of psychology?

PubMed

Green, Christopher D

2016-08-01

This article discusses the role that digital approaches to the history of psychology are likely to play in the near future. A tentative hierarchy of digital methods is proposed. A few examples are briefly described: a digital repository, a simple visualization using ready-made online database and tools, and more complex visualizations requiring the assembly of the database and, possibly, the analytic tools by the researcher. The relationship of digital history to the old "New Economic History" (Cliometrics) is considered. The question of whether digital history and traditional history need be at odds or, instead, might complement each other is woven throughout. The rapidly expanding territory of digital humanistic research outside of psychology is briefly discussed. Finally, the challenging current employment trends in history and the humanities more broadly are considered, along with the role that digital skills might play in mitigating those factors for prospective academic workers. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Examining Literacy Teachers' Perceptions of the Use of VoiceThread in an Elementary, Middle School, and a High School Classroom for Enhancing Instructional Goals

ERIC Educational Resources Information Center

Stover, Katie; Kissel, Brian; Wood, Karen; Putman, Michael

2015-01-01

In today's digital age, Web 2.0 tools such as VoiceThread allow users to integrate images, voices, and responses within one digital platform, providing students with the opportunity to add another layer of meaning to their texts. We conducted this research to expand our understanding of the processes necessary for integrating digital tools into…

Engaging patients with digital tools: what we think we know.

PubMed

Fox, Brent I; Felkey, Bill G

2014-11-01

Patients who are engaged in their own care have better outcomes and cost the health care system less money. Creating the environment that supports patient engagement has been a recent focus across the United States, and digital tools have been suggested as an important piece of patient engagement. We discuss what we think we know about digital engagement, and present data of what is actually occurring.

An integrated approach to distance learning with digital video in the French-speaking Virtual Medical University.

PubMed

Dufour, J C; Cuggia, M; Soula, G; Spector, M; Kohler, F

2007-01-01

The aim of the French-speaking Virtual Medical University project (UMVF) is to share common resources and specific tools in order to improve medical training. Digital video on IP is an attractive tool for higher education but there are a number of obstacles to widespread implementation. This paper describes the UMVF approach to integrating digital video technologies and services in educational projects.

"I Don't Even Know What Blogging Is": The Role of Digital Media in a Five-Year-Old Girl's Life

ERIC Educational Resources Information Center

Teichert, Laura; Anderson, Ann

2014-01-01

Using a qualitative lens, this study investigated the role of digital media in the life of a five-year-old girl. The study focused on determining what this five-year-old knew about technology, what digital tools was she currently using and how important were these tools in her everyday life. Data collection included semi-structured interviews…

Quantifying the Personal Creative Experience: Evaluation of Digital Creativity Support Tools Using Self-Report and Physiological Responses

ERIC Educational Resources Information Center

Carroll, Erin Ashley

2013-01-01

Creativity is understood intuitively, but it is not easily defined and therefore difficult to measure. This makes it challenging to evaluate the ability of a digital tool to support the creative process. When evaluating creativity support tools (CSTs), it is critical to look beyond traditional time, error, and other productivity measurements that…

Development of eHOME, a Mobile Instrument for Reporting, Monitoring, and Consulting Drug-Related Problems in Home Care: Human-Centered Design Study

PubMed Central

Sino, Carolina Geertruida Maria; Heerdink, Eibert Rob; Schuurmans, Marieke Joanna

2018-01-01

Background Home care patients often use many medications and are prone to drug-related problems (DRPs). For the management of problems related to drug use, home care could add to the multidisciplinary expertise of general practitioners (GPs) and pharmacists. The home care observation of medication-related problems by home care employees (HOME)-instrument is paper-based and assists home care workers in reporting potential DRPs. To facilitate the multiprofessional consultation, a digital report of DRPs from the HOME-instrument and digital monitoring and consulting of DRPs between home care and general practices and pharmacies is desired. Objective The objective of this study was to develop an electronic HOME system (eHOME), a mobile version of the HOME-instrument that includes a monitoring and a consulting system for primary care. Methods The development phase of the Medical Research Council (MRC) framework was followed in which an iterative human-centered design (HCD) approach was applied. The approach involved a Delphi round for the context of use and user requirements analysis of the digital HOME-instrument and the monitoring and consulting system followed by 2 series of pilots for testing the usability and redesign. Results By using an iterative design approach and by involving home care workers, GPs, and pharmacists throughout the process as informants, design partners, and testers, important aspects that were crucial for system realization and user acceptance were revealed. Through the report webpage interface, which includes the adjusted content of the HOME-instrument and added home care practice–based problems, home care workers can digitally report observed DRPs. Furthermore, it was found that the monitoring and consulting webpage interfaces enable digital consultation between home care and general practices and pharmacies. The webpages were considered convenient, clear, easy, and usable. Conclusions By employing an HCD approach, the eHOME-instrument was found to be an easy-to-use system. The systematic approach promises a valuable contribution for the future development of digital mobile systems of paper-based tools. PMID:29514771

Development of eHOME, a Mobile Instrument for Reporting, Monitoring, and Consulting Drug-Related Problems in Home Care: Human-Centered Design Study.

PubMed

Dijkstra, Nienke Elske; Sino, Carolina Geertruida Maria; Heerdink, Eibert Rob; Schuurmans, Marieke Joanna

2018-03-07

Home care patients often use many medications and are prone to drug-related problems (DRPs). For the management of problems related to drug use, home care could add to the multidisciplinary expertise of general practitioners (GPs) and pharmacists. The home care observation of medication-related problems by home care employees (HOME)-instrument is paper-based and assists home care workers in reporting potential DRPs. To facilitate the multiprofessional consultation, a digital report of DRPs from the HOME-instrument and digital monitoring and consulting of DRPs between home care and general practices and pharmacies is desired. The objective of this study was to develop an electronic HOME system (eHOME), a mobile version of the HOME-instrument that includes a monitoring and a consulting system for primary care. The development phase of the Medical Research Council (MRC) framework was followed in which an iterative human-centered design (HCD) approach was applied. The approach involved a Delphi round for the context of use and user requirements analysis of the digital HOME-instrument and the monitoring and consulting system followed by 2 series of pilots for testing the usability and redesign. By using an iterative design approach and by involving home care workers, GPs, and pharmacists throughout the process as informants, design partners, and testers, important aspects that were crucial for system realization and user acceptance were revealed. Through the report webpage interface, which includes the adjusted content of the HOME-instrument and added home care practice-based problems, home care workers can digitally report observed DRPs. Furthermore, it was found that the monitoring and consulting webpage interfaces enable digital consultation between home care and general practices and pharmacies. The webpages were considered convenient, clear, easy, and usable. By employing an HCD approach, the eHOME-instrument was found to be an easy-to-use system. The systematic approach promises a valuable contribution for the future development of digital mobile systems of paper-based tools. ©Nienke Elske Dijkstra, Carolina Geertruida Maria Sino, Eibert Rob Heerdink, Marieke Joanna Schuurmans. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 07.03.2018.

How Do Nursing Students Use Digital Tools during Lectures?

PubMed

Sebri, Isabelle; Bartier, Jean-Claude; Pelaccia, Thierry

2016-01-01

Teachers often wonder what students are doing during lectures, behind their computers, mobile phones and other digital tools. This study aimed to document the type of tools used during lectures by nursing students and what they do with them. We carried out a descriptive, prospective, multicentre study including 1446 nursing students in Alsace (France). The students filled in an anonymous questionnaire at the end of a lesson they had just attended. 99% of the students had taken at least one digital tool to the lesson. 90% had a mobile phone with them. It was mainly used for entertainment (particularly for sending and/or receiving text messages and consulting emails). 52% had a laptop with them. It was essentially used for academic tasks (taking notes, working on other teaching units or revising for exams). Most nursing students take a phone or laptop to lectures with them with the intention of using them for entertainment and learning respectively. These results could guide training establishments in drafting their institutional policy concerning the use of digital tools in class.

How Do Nursing Students Use Digital Tools during Lectures?

PubMed Central

Sebri, Isabelle; Bartier, Jean-Claude

2016-01-01

Objectives Teachers often wonder what students are doing during lectures, behind their computers, mobile phones and other digital tools. This study aimed to document the type of tools used during lectures by nursing students and what they do with them. Methods We carried out a descriptive, prospective, multicentre study including 1446 nursing students in Alsace (France). The students filled in an anonymous questionnaire at the end of a lesson they had just attended. Results 99% of the students had taken at least one digital tool to the lesson. 90% had a mobile phone with them. It was mainly used for entertainment (particularly for sending and/or receiving text messages and consulting emails). 52% had a laptop with them. It was essentially used for academic tasks (taking notes, working on other teaching units or revising for exams). Conclusion Most nursing students take a phone or laptop to lectures with them with the intention of using them for entertainment and learning respectively. These results could guide training establishments in drafting their institutional policy concerning the use of digital tools in class. PMID:27812170

Visual Data Comm: A Tool for Visualizing Data Communication in the Multi Sector Planner Study

NASA Technical Reports Server (NTRS)

Lee, Hwasoo Eric

2010-01-01

Data comm is a new technology proposed in future air transport system as a potential tool to provide comprehensive data connectivity. It is a key enabler to manage 4D trajectory digitally, potentially resulting in improved flight times and increased throughput. Future concepts with data comm integration have been tested in a number of human-in-the-loop studies but analyzing the results has proven to be particularly challenging because future traffic environment in which data comm is fully enabled has assumed high traffic density, resulting in data set with large amount of information. This paper describes the motivation, design, current and potential future application of Visual Data Comm (VDC), a tool for visualizing data developed in Java using Processing library which is a tool package designed for interactive visualization programming. This paper includes an example of an application of VDC on data pertaining to the most recent Multi Sector Planner study, conducted at NASA s Airspace Operations Laboratory in 2009, in which VDC was used to visualize and interpret data comm activities

3D Printed Fluidic Hardware for DNA Assembly

DTIC Science & Technology

2015-04-10

A3909 stepper motor driver, were soldered onto the milled circuit board (Supplementary Figure 8). Custom Arduino - based firmware was written to take...initiatives such as the FabLab Foundation10. Access to digital fabrication tools and open electronics, such as Arduino and Raspberry Pi, enables access to...hardware for assembly of DNA- based genetic circuits. Solid-phase DNA synthesis has declined in price, enabling researchers to routinely design and

Simulation Tools for Digital LSI (Large Scale Integration) Design.

DTIC Science & Technology

1983-09-01

potential paths e:,,t from a t.,sde to t alnd (,A I isl gc’, , that It iioht he coton ilci, ilt d I:eriniiie d f ’ Ti.. ’he o diti ns for %0l’h , i p th...the flag is set during an execution of the code, another iteration is performed; otherwise, the subroutine is finished . The following is an extended

Informing Understanding of Young Students' Writing Challenges and Opportunities: Insights From the Development of a Digital Writing Tool That Supports Students With Learning Disabilities

ERIC Educational Resources Information Center

Vue, Ge; Hall, Tracey E.; Robinson, Kristin; Ganley, Patricia; Elizalde, Emma; Graham, Steve

2016-01-01

Conducting focus groups with target audiences to assess user needs is a critical step in the process of designing and developing a web-based writing environment. This descriptive study examined focus group data gathered to address two questions: First, do data from focus groups affirm and expand our understanding of writing and writing development…

Hand anthropometry of Indian women.

PubMed

Nag, Anjali; Nag, P K; Desai, Hina

2003-06-01

Data on the physical dimension of the hand of Indian women are scanty. This information is necessary to ascertain human-machine compatibility in the design of manual systems for the bare and gloved hand, such as design and sizing of hand tools, controls, knobs and other applications in different kinds of precision and power grips. The present study was undertaken to generate hand anthropometric data of 95 women, working in informal industries (beedi, agarbatti and garment making). Fifty one hand measurements of the right hand (lengths, breadths, circumferences, depths, spreads and clearances of hand and fingers) were taken, using anthropometric sliding and spreading calipers, measuring tape and handgrip strength dynamometer. The data were statistically analyzed to determine the normality of data and the percentile values of different hand dimensions, and simple and multiple regression analysis were done to determine better predictors of hand length and grip strength. The hand breadths, circumferences and depths were approximately normally distributed, with some deviation in case of the finger lengths. Hand length was significantly correlated with the fist, wrist and finger circumferences. The fist and wrist circumferences, in combination, were better predictors of hand length. The hand lengths, breadths and depths, including finger joints of the Indian women studied were smaller than those of American, British and West Indian women. The hand circumferences of the Indian women were also smaller than the American women. Grip strengths of Indian women (20.36 +/- 3.24 kg) were less than those of American, British and West Indian women. Grip strength was found to be statistically significant with hand dimensions, such as hand height perpendicular to wrist crease (digit 5), proximal interphalangeal joint breadth (digit 3) and hand spread across wedge 1. The women who are forced to frequently use cutters, strippers and other tools, which are not optimally designed to their hand dimensions and strength range, might have higher prevalence of clinical symptoms and disorders of the hand. In view of the human hand-tool interface requirements, the present data on Indian women would be useful for ergo-design applications of hand tools and devices.

Large-scale feature searches of collections of medical imagery

NASA Astrophysics Data System (ADS)

Hedgcock, Marcus W.; Karshat, Walter B.; Levitt, Tod S.; Vosky, D. N.

1993-09-01

Large scale feature searches of accumulated collections of medical imagery are required for multiple purposes, including clinical studies, administrative planning, epidemiology, teaching, quality improvement, and research. To perform a feature search of large collections of medical imagery, one can either search text descriptors of the imagery in the collection (usually the interpretation), or (if the imagery is in digital format) the imagery itself. At our institution, text interpretations of medical imagery are all available in our VA Hospital Information System. These are downloaded daily into an off-line computer. The text descriptors of most medical imagery are usually formatted as free text, and so require a user friendly database search tool to make searches quick and easy for any user to design and execute. We are tailoring such a database search tool (Liveview), developed by one of the authors (Karshat). To further facilitate search construction, we are constructing (from our accumulated interpretation data) a dictionary of medical and radiological terms and synonyms. If the imagery database is digital, the imagery which the search discovers is easily retrieved from the computer archive. We describe our database search user interface, with examples, and compare the efficacy of computer assisted imagery searches from a clinical text database with manual searches. Our initial work on direct feature searches of digital medical imagery is outlined.

Representation-based user interfaces for the audiovisual library of the year 2000

NASA Astrophysics Data System (ADS)

Aigrain, Philippe; Joly, Philippe; Lepain, Philippe; Longueville, Veronique

1995-03-01

The audiovisual library of the future will be based on computerized access to digitized documents. In this communication, we address the user interface issues which will arise from this new situation. One cannot simply transfer a user interface designed for the piece by piece production of some audiovisual presentation and make it a tool for accessing full-length movies in an electronic library. One cannot take a digital sound editing tool and propose it as a means to listen to a musical recording. In our opinion, when computers are used as mediations to existing contents, document representation-based user interfaces are needed. With such user interfaces, a structured visual representation of the document contents is presented to the user, who can then manipulate it to control perception and analysis of these contents. In order to build such manipulable visual representations of audiovisual documents, one needs to automatically extract structural information from the documents contents. In this communication, we describe possible visual interfaces for various temporal media, and we propose methods for the economically feasible large scale processing of documents. The work presented is sponsored by the Bibliotheque Nationale de France: it is part of the program aiming at developing for image and sound documents an experimental counterpart to the digitized text reading workstation of this library.

Digital signal processing at Bell Labs-Foundations for speech and acoustics research

NASA Astrophysics Data System (ADS)

Rabiner, Lawrence R.

2004-05-01

Digital signal processing (DSP) is a fundamental tool for much of the research that has been carried out of Bell Labs in the areas of speech and acoustics research. The fundamental bases for DSP include the sampling theorem of Nyquist, the method for digitization of analog signals by Shannon et al., methods of spectral analysis by Tukey, the cepstrum by Bogert et al., and the FFT by Tukey (and Cooley of IBM). Essentially all of these early foundations of DSP came out of the Bell Labs Research Lab in the 1930s, 1940s, 1950s, and 1960s. This fundamental research was motivated by fundamental applications (mainly in the areas of speech, sonar, and acoustics) that led to novel design methods for digital filters (Kaiser, Golden, Rabiner, Schafer), spectrum analysis methods (Rabiner, Schafer, Allen, Crochiere), fast convolution methods based on the FFT (Helms, Bergland), and advanced digital systems used to implement telephony channel banks (Jackson, McDonald, Freeny, Tewksbury). This talk summarizes the key contributions to DSP made at Bell Labs, and illustrates how DSP was utilized in the areas of speech and acoustics research. It also shows the vast, worldwide impact of this DSP research on modern consumer electronics.

User centered design of the digital book: why looking backward can help us move forward

NASA Astrophysics Data System (ADS)

Wallis, Jillian C.

2006-02-01

What is emerging from the digital book revolution is a state of technology that has brought new affordances to the book, such as search, hyperlinking, personalization, dynamic content, 24/7 access, automated indexing and summarizing, aggregated content, and new modes of reading and access. These could solve some of the issues users have with the static content of traditional bound volumes, but the technology so far has staunchly ignored the tried and true technologies of books, such as infinite resolution, high contrast, low glare, haptic navigation, typographic niceties, and the rights of first sale to borrow, lend, or resell a work. By exploring a survey of literature, reviews, and user tests, I intend to address the point of how the current concept of the digital book is an inappropriate tool for the user and the task of reading, and as a result not been enthusiastically embraced by the market. The collected evidence indicates that it is impossible to forget our past in our quest for the future, and that technology can help us to unite the disparate realities of analog and digital to create a truly digital book.

Migration of the digital interactive breast-imaging teaching file

NASA Astrophysics Data System (ADS)

Cao, Fei; Sickles, Edward A.; Huang, H. K.; Zhou, Xiaoqiang

1998-06-01

The digital breast imaging teaching file developed during the last two years in our laboratory has been used successfully at UCSF (University of California, San Francisco) as a routine teaching tool for training radiology residents and fellows in mammography. Building on this success, we have ported the teaching file from an old Pixar imaging/Sun SPARC 470 display system to our newly designed telemammography display workstation (Ultra SPARC 2 platform with two DOME Md5/SBX display boards). The old Pixar/Sun 470 system, although adequate for fast and high-resolution image display, is 4- year-old technology, expensive to maintain and difficult to upgrade. The new display workstation is more cost-effective and is also compatible with the digital image format from a full-field direct digital mammography system. The digital teaching file is built on a sophisticated computer-aided instruction (CAI) model, which simulates the management sequences used in imaging interpretation and work-up. Each user can be prompted to respond by making his/her own observations, assessments, and work-up decisions as well as the marking of image abnormalities. This effectively replaces the traditional 'show-and-tell' teaching file experience with an interactive, response-driven type of instruction.

How do young and senior cytopathologists interact with digital cytology?

PubMed

Giovagnoli, Maria Rosaria; Giarnieri, Enrico; Carico, Elisabetta; Giansanti, Daniele

2010-01-01

Today thanks to the technological advances in information technology the scenario of utilization of digital cytology has radically changed. New competitive systems, such as client-server architectures are now available in digital cytology. Their application in telemedicine should be investigated. A new interactive tool designed for the final destination user (the cytopathologist) has been proposed. Taking into account the different expertise of the subjects of the study, the investigation was focused both on the senior cytopathologist and on the younger student pathologist. The methodology was tested on 10 students of a Master in cytopathology and on 3 senior cytopathologists. The study showed that the use of digital cytology applications is effective and feasible for telediagnosis. In particular, the study on younger and senior expert investigators showed that, although they interacted with the novel technology of the virtual slide in a different manner, all of them reached the objective of a "correct diagnosis". This investigation, in consideration of the effectiveness of the digital cytology, also showed other indirect and tangible cost-beneft and quantitative advantages. In particular for the learning methodologies for the students of the Master itself and for the biomedical personnel involved in diagnosis.

The effectiveness of annotated (vs. non-annotated) digital pathology slides as a teaching tool during dermatology and pathology residencies.

PubMed

Marsch, Amanda F; Espiritu, Baltazar; Groth, John; Hutchens, Kelli A

2014-06-01

With today's technology, paraffin-embedded, hematoxylin & eosin-stained pathology slides can be scanned to generate high quality virtual slides. Using proprietary software, digital images can also be annotated with arrows, circles and boxes to highlight certain diagnostic features. Previous studies assessing digital microscopy as a teaching tool did not involve the annotation of digital images. The objective of this study was to compare the effectiveness of annotated digital pathology slides versus non-annotated digital pathology slides as a teaching tool during dermatology and pathology residencies. A study group composed of 31 dermatology and pathology residents was asked to complete an online pre-quiz consisting of 20 multiple choice style questions, each associated with a static digital pathology image. After completion, participants were given access to an online tutorial composed of digitally annotated pathology slides and subsequently asked to complete a post-quiz. A control group of 12 residents completed a non-annotated version of the tutorial. Nearly all participants in the study group improved their quiz score, with an average improvement of 17%, versus only 3% (P = 0.005) in the control group. These results support the notion that annotated digital pathology slides are superior to non-annotated slides for the purpose of resident education. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Designing, Prototyping and Evaluating Digital Mindfulness Applications: A Case Study of Mindful Breathing for Stress Reduction

PubMed Central

Hedman, Anders; Feng, Shuo; Li, Haibo; Osika, Walter

2017-01-01

Background During the past decade, there has been a rapid increase of interactive apps designed for health and well-being. Yet, little research has been published on developing frameworks for design and evaluation of digital mindfulness facilitating technologies. Moreover, many existing digital mindfulness applications are purely software based. There is room for further exploration and assessment of designs that make more use of physical qualities of artifacts. Objective The study aimed to develop and test a new physical digital mindfulness prototype designed for stress reduction. Methods In this case study, we designed, developed, and evaluated HU, a physical digital mindfulness prototype designed for stress reduction. In the first phase, we used vapor and light to support mindful breathing and invited 25 participants through snowball sampling to test HU. In the second phase, we added sonification. We deployed a package of probes such as photos, diaries, and cards to collect data from users who explored HU in their homes. Thereafter, we evaluated our installation using both self-assessed stress levels and heart rate (HR) and heart rate variability (HRV) measures in a pilot study, in order to measure stress resilience effects. After the experiment, we performed a semistructured interview to reflect on HU and investigate the design of digital mindfulness apps for stress reduction. Results The results of the first phase showed that 22 of 25 participants (88%) claimed vapor and light could be effective ways of promoting mindful breathing. Vapor could potentially support mindful breathing better than light (especially for mindfulness beginners). In addition, a majority of the participants mentioned sound as an alternative medium. In the second phase, we found that participants thought that HU could work well for stress reduction. We compared the effect of silent HU (using light and vapor without sound) and sonified HU on 5 participants. Subjective stress levels were statistically improved with both silent and sonified HU. The mean value of HR using silent HU was significantly lower than resting baseline and sonified HU. The mean value of root mean square of differences (RMSSD) using silent HU was significantly higher than resting baseline. We found that the differences between our objective and subjective assessments were intriguing and prompted us to investigate them further. Conclusions Our evaluation of HU indicated that HU could facilitate relaxed breathing and stress reduction. There was a difference in outcome between the physiological measures of stress and the subjective reports of stress, as well as a large intervariability among study participants. Our conclusion is that the use of stress reduction tools should be customized and that the design work of mindfulness technology for stress reduction is a complex process, which requires cooperation of designers, HCI (Human-Computer Interaction) experts and clinicians. PMID:28615157

The development of a digital logic concept inventory

NASA Astrophysics Data System (ADS)

Herman, Geoffrey Lindsay

Instructors in electrical and computer engineering and in computer science have developed innovative methods to teach digital logic circuits. These methods attempt to increase student learning, satisfaction, and retention. Although there are readily accessible and accepted means for measuring satisfaction and retention, there are no widely accepted means for assessing student learning. Rigorous assessment of learning is elusive because differences in topic coverage, curriculum and course goals, and exam content prevent direct comparison of two teaching methods when using tools such as final exam scores or course grades. Because of these difficulties, computing educators have issued a general call for the adoption of assessment tools to critically evaluate and compare the various teaching methods. Science, Technology, Engineering, and Mathematics (STEM) education researchers commonly measure students' conceptual learning to compare how much different pedagogies improve learning. Conceptual knowledge is often preferred because all engineering courses should teach a fundamental set of concepts even if they emphasize design or analysis to different degrees. Increasing conceptual learning is also important, because students who can organize facts and ideas within a consistent conceptual framework are able to learn new information quickly and can apply what they know in new situations. If instructors can accurately assess their students' conceptual knowledge, they can target instructional interventions to remedy common problems. To properly assess conceptual learning, several researchers have developed concept inventories (CIs) for core subjects in engineering sciences. CIs are multiple-choice assessment tools that evaluate how well a student's conceptual framework matches the accepted conceptual framework of a discipline or common faulty conceptual frameworks. We present how we created and evaluated the digital logic concept inventory (DLCI).We used a Delphi process to identify the important and difficult concepts to include on the DLCI. To discover and describe common student misconceptions, we interviewed students who had completed a digital logic course. Students vocalized their thoughts as they solved digital logic problems. We analyzed the interview data using a qualitative grounded theory approach. We have administered the DLCI at several institutions and have checked the validity, reliability, and bias of the DLCI with classical testing theory procedures. These procedures consisted of follow-up interviews with students, analysis of administration results with statistical procedures, and expert feedback. We discuss these results and present the DLCI's potential for providing a meaningful tool for comparing student learning at different institutions.

Open source tools for management and archiving of digital microscopy data to allow integration with patient pathology and treatment information.

PubMed

Khushi, Matloob; Edwards, Georgina; de Marcos, Diego Alonso; Carpenter, Jane E; Graham, J Dinny; Clarke, Christine L

2013-02-12

Virtual microscopy includes digitisation of histology slides and the use of computer technologies for complex investigation of diseases such as cancer. However, automated image analysis, or website publishing of such digital images, is hampered by their large file sizes. We have developed two Java based open source tools: Snapshot Creator and NDPI-Splitter. Snapshot Creator converts a portion of a large digital slide into a desired quality JPEG image. The image is linked to the patient's clinical and treatment information in a customised open source cancer data management software (Caisis) in use at the Australian Breast Cancer Tissue Bank (ABCTB) and then published on the ABCTB website (http://www.abctb.org.au) using Deep Zoom open source technology. Using the ABCTB online search engine, digital images can be searched by defining various criteria such as cancer type, or biomarkers expressed. NDPI-Splitter splits a large image file into smaller sections of TIFF images so that they can be easily analysed by image analysis software such as Metamorph or Matlab. NDPI-Splitter also has the capacity to filter out empty images. Snapshot Creator and NDPI-Splitter are novel open source Java tools. They convert digital slides into files of smaller size for further processing. In conjunction with other open source tools such as Deep Zoom and Caisis, this suite of tools is used for the management and archiving of digital microscopy images, enabling digitised images to be explored and zoomed online. Our online image repository also has the capacity to be used as a teaching resource. These tools also enable large files to be sectioned for image analysis. The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/5330903258483934.

A sneak peek into digital innovations and wearable sensors for cardiac monitoring.

PubMed

Michard, Frederic

2017-04-01

Many mobile phone or tablet applications have been designed to control cardiovascular risk factors (obesity, smoking, sedentary lifestyle, diabetes and hypertension) or to optimize treatment adherence. Some have been shown to be useful but the long-term benefits remain to be demonstrated. Digital stethoscopes make easier the interpretation of abnormal heart sounds, and the development of pocket-sized echo machines may quickly and significantly expand the use of ultrasounds. Daily home monitoring of pulmonary artery pressures with wireless implantable sensors has been shown to be associated with a significant decrease in hospital readmissions for heart failure. There are more and more non-invasive, wireless, and wearable sensors designed to monitor heart rate, heart rate variability, respiratory rate, arterial oxygen saturation, and thoracic fluid content. They have the potential to change the way we monitor and treat patients with cardiovascular diseases in the hospital and beyond. Some may have the ability to improve quality of care, decrease the number of medical visits and hospitalization, and ultimately health care costs. Validation and outcome studies are needed to clarify, among the growing number of digital innovations and wearable sensors, which tools have real clinical value.

Generation of Boundary Manikin Anthropometry

NASA Technical Reports Server (NTRS)

Young, Karen S.; Margerum, Sarah; Barr, Abbe; Ferrer, Mike A.; Rajulu, Sudhakar

2008-01-01

The purpose of this study was to develop 3D digital boundary manikins that are representative of the anthropometry of a unique population. These digital manikins can be used by designers to verify and validate that the components of the spacesuit design satisfy the requirements specified in the Human Systems Integration Requirements (HSIR) document. Currently, the HSIR requires the suit to accommodate the 1st percentile American female to the 99th percentile American male. The manikin anthropometry was derived using two methods: Principal Component Analysis (PCA) and Whole Body Posture Based Analysis (WBPBA). PCA is a statistical method for reducing a multidimensional data set by using eigenvectors and eigenvalues. The goal is to create a reduced data set that encapsulates the majority of the variation in the population. WBPBA is a multivariate analytical approach that was developed by the Anthropometry and Biomechanics Facility (ABF) to identify the extremes of the population for a given body posture. WBPBA is a simulation-based method that finds extremes in a population based on anthropometry and posture whereas PCA is based solely on anthropometry. Both methods yield a list of subjects and their anthropometry from the target population; PCA resulted in 20 female and 22 male subjects anthropometry and WBPBA resulted in 7 subjects' anthropometry representing the extreme subjects in the target population. The subjects anthropometry is then used to 'morph' a baseline digital scan of a person with the same body type to create a 3D digital model that can be used as a tool for designers, the details of which will be discussed in subsequent papers.

The tracking performance of distributed recoverable flight control systems subject to high intensity radiated fields

NASA Astrophysics Data System (ADS)

Wang, Rui

It is known that high intensity radiated fields (HIRF) can produce upsets in digital electronics, and thereby degrade the performance of digital flight control systems. Such upsets, either from natural or man-made sources, can change data values on digital buses and memory and affect CPU instruction execution. HIRF environments are also known to trigger common-mode faults, affecting nearly-simultaneously multiple fault containment regions, and hence reducing the benefits of n-modular redundancy and other fault-tolerant computing techniques. Thus, it is important to develop models which describe the integration of the embedded digital system, where the control law is implemented, as well as the dynamics of the closed-loop system. In this dissertation, theoretical tools are presented to analyze the relationship between the design choices for a class of distributed recoverable computing platforms and the tracking performance degradation of a digital flight control system implemented on such a platform while operating in a HIRF environment. Specifically, a tractable hybrid performance model is developed for a digital flight control system implemented on a computing platform inspired largely by the NASA family of fault-tolerant, reconfigurable computer architectures known as SPIDER (scalable processor-independent design for enhanced reliability). The focus will be on the SPIDER implementation, which uses the computer communication system known as ROBUS-2 (reliable optical bus). A physical HIRF experiment was conducted at the NASA Langley Research Center in order to validate the theoretical tracking performance degradation predictions for a distributed Boeing 747 flight control system subject to a HIRF environment. An extrapolation of these results for scenarios that could not be physically tested is also presented.

Design Language for Digital Systems

NASA Technical Reports Server (NTRS)

Shiva, S. G.

1985-01-01

Digital Systems Design Language (DDL) is convenient hardware description language for developing and testing digital designs and for inputting design details into design automation system. Describes digital systems at gate, register transfer, and combinational block levels. DDL-based programs written in FORTRAN IV for batch execution.

Digital Video Interactive (DVI) Based Authoring Tools for Unit Level Training. Final Technical Report for Period 27 September 1991 - 27 May 1992.

ERIC Educational Resources Information Center

Hyltin, John P.; And Others

This report describes DVI (Digital Video Interactive) technology, current authoring languages and tools, and the reasons for developing new tools and applications. The work described was performed by Betac Corporation as part of a Phase II Small Business Innovation Research project. Section I provides background information on DVI. DVI technology…

Digitizing and Securing Archived Laboratory Notebooks

ERIC Educational Resources Information Center

Caporizzo, Marilyn

2008-01-01

The Information Group at Millipore has been successfully using a digital rights management tool to secure the email distribution of archived laboratory notebooks. Millipore is a life science leader providing cutting-edge technologies, tools, and services for bioscience research and biopharmaceutical manufacturing. Consisting of four full-time…

New paradigms in internal architecture design and freeform fabrication of tissue engineering porous scaffolds.

PubMed

Yoo, Dongjin

2012-07-01

Advanced additive manufacture (AM) techniques are now being developed to fabricate scaffolds with controlled internal pore architectures in the field of tissue engineering. In general, these techniques use a hybrid method which combines computer-aided design (CAD) with computer-aided manufacturing (CAM) tools to design and fabricate complicated three-dimensional (3D) scaffold models. The mathematical descriptions of micro-architectures along with the macro-structures of the 3D scaffold models are limited by current CAD technologies as well as by the difficulty of transferring the designed digital models to standard formats for fabrication. To overcome these difficulties, we have developed an efficient internal pore architecture design system based on triply periodic minimal surface (TPMS) unit cell libraries and associated computational methods to assemble TPMS unit cells into an entire scaffold model. In addition, we have developed a process planning technique based on TPMS internal architecture pattern of unit cells to generate tool paths for freeform fabrication of tissue engineering porous scaffolds. Copyright © 2012 IPEM. Published by Elsevier Ltd. All rights reserved.

The future of digital games for HIV prevention and care.

PubMed

Hightow-Weidman, Lisa B; Muessig, Kathryn E; Bauermeister, José A; LeGrand, Sara; Fiellin, Lynn E

2017-09-01

Although there has been a significant increase in mHealth interventions addressing the HIV prevention and care continuum, interventions using game mechanics have been less explored. Digital games are rapidly becoming an important tool for improving health behaviors and supporting the delivery of care and education. The purpose of this review is to provide a historical context for the use of gamification and videogames (including those using virtual reality) used in technology-based HIV interventions and to review new research in the field. A review of recently published (1 January 2016-31 March 2017) or presented abstracts (2016) identified a paucity of technology-based interventions that included gamification elements or any terms associated with videogames or gameplay. A larger portfolio of digital gaming interventions is in the pipeline. Use of digital games that include elements of gamification or consist of standalone videogames or virtual-reality-based games, represent a promising intervention strategy to address the HIV prevention and care continuum, especially among youth. Our review demonstrates that there is significant room for growth in this area in designing, developing, testing and most importantly, implementation and dissemination these novel interventions.

Low cost 3D scanning process using digital image processing

NASA Astrophysics Data System (ADS)

Aguilar, David; Romero, Carlos; Martínez, Fernando

2017-02-01

This paper shows the design and building of a low cost 3D scanner, able to digitize solid objects through contactless data acquisition, using active object reflection. 3D scanners are used in different applications such as: science, engineering, entertainment, etc; these are classified in: contact scanners and contactless ones, where the last ones are often the most used but they are expensive. This low-cost prototype is done through a vertical scanning of the object using a fixed camera and a mobile horizontal laser light, which is deformed depending on the 3-dimensional surface of the solid. Using digital image processing an analysis of the deformation detected by the camera was done; it allows determining the 3D coordinates using triangulation. The obtained information is processed by a Matlab script, which gives to the user a point cloud corresponding to each horizontal scanning done. The obtained results show an acceptable quality and significant details of digitalized objects, making this prototype (built on LEGO Mindstorms NXT kit) a versatile and cheap tool, which can be used for many applications, mainly by engineering students.

A Pipeline for 3D Digital Optical Phenotyping Plant Root System Architecture

NASA Astrophysics Data System (ADS)

Davis, T. W.; Shaw, N. M.; Schneider, D. J.; Shaff, J. E.; Larson, B. G.; Craft, E. J.; Liu, Z.; Kochian, L. V.; Piñeros, M. A.

2017-12-01

This work presents a new pipeline for digital optical phenotyping the root system architecture of agricultural crops. The pipeline begins with a 3D root-system imaging apparatus for hydroponically grown crop lines of interest. The apparatus acts as a self-containing dark room, which includes an imaging tank, motorized rotating bearing and digital camera. The pipeline continues with the Plant Root Imaging and Data Acquisition (PRIDA) software, which is responsible for image capturing and storage. Once root images have been captured, image post-processing is performed using the Plant Root Imaging Analysis (PRIA) command-line tool, which extracts root pixels from color images. Following the pre-processing binarization of digital root images, 3D trait characterization is performed using the next-generation RootReader3D software. RootReader3D measures global root system architecture traits, such as total root system volume and length, total number of roots, and maximum rooting depth and width. While designed to work together, the four stages of the phenotyping pipeline are modular and stand-alone, which provides flexibility and adaptability for various research endeavors.

Dermoscopy, Digital Dermoscopy and Other Diagnostic Tools in the Early Detection of Melanoma and Follow-up of High-risk Skin Cancer Patients.

PubMed

Thomas, Luc; Puig, Susana

2017-07-05

Early detection is a key strategy for reducing the mortality and economic burden associated with melanoma. Dermoscopy is a non-invasive and cost-effective tool for melanoma diagnosis, which has been shown to be a reliable and sensitive method for detecting early-stage skin cancer and reducing the number of unnecessary excisions. Patients at high risk of developing melanoma require long-term surveillance. Use of digital dermoscopy follow-up of these patients has led to improved outcomes. Combined follow-up programmes using total-body photography and digital dermoscopy have led to further improvements in early diagnosis and diagnostic accuracy. Dermoscopy is now widely used by dermatologists, but the public health impact of this tool is yet to be evaluated. Despite the clear advantages of dermoscopy and digital follow-up meth-ods, dermoscopy training and access to digital dermoscopy among dermatologists and general practitioners needs to be improved.

[Research on infrared safety protection system for machine tool].

PubMed

Zhang, Shuan-Ji; Zhang, Zhi-Ling; Yan, Hui-Ying; Wang, Song-De

2008-04-01

In order to ensure personal safety and prevent injury accident in machine tool operation, an infrared machine tool safety system was designed with infrared transmitting-receiving module, memory self-locked relay and voice recording-playing module. When the operator does not enter the danger area, the system has no response. Once the operator's whole or part of body enters the danger area and shades the infrared beam, the system will alarm and output an control signal to the machine tool executive element, and at the same time, the system makes the machine tool emergency stop to prevent equipment damaged and person injured. The system has a module framework, and has many advantages including safety, reliability, common use, circuit simplicity, maintenance convenience, low power consumption, low costs, working stability, easy debugging, vibration resistance and interference resistance. It is suitable for being installed and used in different machine tools such as punch machine, pour plastic machine, digital control machine, armor plate cutting machine, pipe bending machine, oil pressure machine etc.

Digital Images on the DIME

NASA Technical Reports Server (NTRS)

2003-01-01

With NASA on its side, Positive Systems, Inc., of Whitefish, Montana, is veering away from the industry standards defined for producing and processing remotely sensed images. A top developer of imaging products for geographic information system (GIS) and computer-aided design (CAD) applications, Positive Systems is bucking traditional imaging concepts with a cost-effective and time-saving software tool called Digital Images Made Easy (DIME(trademark)). Like piecing a jigsaw puzzle together, DIME can integrate a series of raw aerial or satellite snapshots into a single, seamless panoramic image, known as a 'mosaic.' The 'mosaicked' images serve as useful backdrops to GIS maps - which typically consist of line drawings called 'vectors' - by allowing users to view a multidimensional map that provides substantially more geographic information.

From Oss CAD to Bim for Cultural Heritage Digital Representation

NASA Astrophysics Data System (ADS)

Logothetis, S.; Karachaliou, E.; Stylianidis, E.

2017-02-01

The paper illustrates the use of open source Computer-aided design (CAD) environments in order to develop Building Information Modelling (BIM) tools able to manage 3D models in the field of cultural heritage. Nowadays, the development of Free and Open Source Software (FOSS) has been rapidly growing and their use tends to be consolidated. Although BIM technology is widely known and used, there is a lack of integrated open source platforms able to support all stages of Historic Building Information Modelling (HBIM) processes. The present research aims to use a FOSS CAD environment in order to develop BIM plug-ins which will be able to import and edit digital representations of cultural heritage models derived by photogrammetric methods.

Attractive design: an elution solvent optimization platform for magnetic-bead-based fractionation using digital microfluidics and design of experiments.

PubMed

Lafrenière, Nelson M; Mudrik, Jared M; Ng, Alphonsus H C; Seale, Brendon; Spooner, Neil; Wheeler, Aaron R

2015-04-07

There is great interest in the development of integrated tools allowing for miniaturized sample processing, including solid phase extraction (SPE). We introduce a new format for microfluidic SPE relying on C18-functionalized magnetic beads that can be manipulated in droplets in a digital microfluidic platform. This format provides the opportunity to tune the amount (and potentially the type) of stationary phase on-the-fly, and allows the removal of beads after the extraction (to enable other operations in same device-space), maintaining device reconfigurability. Using the new method, we employed a design of experiments (DOE) operation to enable automated on-chip optimization of elution solvent composition for reversed phase SPE of a model system. Further, conditions were selected to enable on-chip fractionation of multiple analytes. Finally, the method was demonstrated to be useful for online cleanup of extracts from dried blood spot (DBS) samples. We anticipate this combination of features will prove useful for separating a wide range of analytes, from small molecules to peptides, from complex matrices.

A Mach-Zender digital holographic microscope with sub-micrometer resolution for imaging and tracking of marine micro-organisms

NASA Astrophysics Data System (ADS)

Kühn, Jonas; Niraula, Bimochan; Liewer, Kurt; Kent Wallace, J.; Serabyn, Eugene; Graff, Emilio; Lindensmith, Christian; Nadeau, Jay L.

2014-12-01

Digital holographic microscopy is an ideal tool for investigation of microbial motility. However, most designs do not exhibit sufficient spatial resolution for imaging bacteria. In this study we present an off-axis Mach-Zehnder design of a holographic microscope with spatial resolution of better than 800 nm and the ability to resolve bacterial samples at varying densities over a 380 μm × 380 μm × 600 μm three-dimensional field of view. Larger organisms, such as protozoa, can be resolved in detail, including cilia and flagella. The instrument design and performance are presented, including images and tracks of bacterial and protozoal mixed samples and pure cultures of six selected species. Organisms as small as 1 μm (bacterial spores) and as large as 60 μm (Paramecium bursaria) may be resolved and tracked without changes in the instrument configuration. Finally, we present a dilution series investigating the maximum cell density that can be imaged, a type of analysis that has not been presented in previous holographic microscopy studies.

Ubiquitous computing to support co-located clinical teams: using the semiotics of physical objects in system design.

PubMed

Bang, Magnus; Timpka, Toomas

2007-06-01

Co-located teams often use material objects to communicate messages in collaboration. Modern desktop computing systems with abstract graphical user interface (GUIs) fail to support this material dimension of inter-personal communication. The aim of this study is to investigate how tangible user interfaces can be used in computer systems to better support collaborative routines among co-located clinical teams. The semiotics of physical objects used in team collaboration was analyzed from data collected during 1 month of observations at an emergency room. The resulting set of communication patterns was used as a framework when designing an experimental system. Following the principles of augmented reality, physical objects were mapped into a physical user interface with the goal of maintaining the symbolic value of those objects. NOSTOS is an experimental ubiquitous computing environment that takes advantage of interaction devices integrated into the traditional clinical environment, including digital pens, walk-up displays, and a digital desk. The design uses familiar workplace tools to function as user interfaces to the computer in order to exploit established cognitive and collaborative routines. Paper-based tangible user interfaces and digital desks are promising technologies for co-located clinical teams. A key issue that needs to be solved before employing such solutions in practice is associated with limited feedback from the passive paper interfaces.

Design Principles for the Information Architecture of a SMET Education Digital Library.

ERIC Educational Resources Information Center

Dong, Andy; Agogino, Alice M.

This implementation paper introduces principles for the information architecture of an educational digital library, principles that address the distinction between designing digital libraries for education and designing digital libraries for information retrieval in general. Design is a key element of any successful product. Good designers and…

VPIsystems industry training program on computer-aided design of fiber optic communication systems

NASA Astrophysics Data System (ADS)

Richter, Andre; Chan, David K. C.

2002-05-01

In industry today, professional Photonic Design Automation (PDA) tools are a necessity to enable fast development cycles for the design of optical components, systems and networks. The training of industrial personnel is of great importance in facilitating the full usability of PDA tools tailored to meet these demands. As the market leader of design and planning tools for system integrators and manufacturers of optical transmission systems and components, VPIsystems offers a set of two-day training courses. Attendees are taught on the design of metro WDM networks, high speed DWDM and ultra long-haul WDM systems, analogue and digital cable access systems, EDFA and Raman amplifiers, as well as active devices and circuits. The course work compromises of: (1) lectures on physical and modeling background topics; (2) creation of typical simulation scenarios and; (3) the analysis of results. This course work is facilitated by guided, hands-on lab exercises using VPIsystems software for a variety of practical design situations. In classes of up to 15, each attendee is allocated a computer, thereby allowing for a thorough and speedy training for the individual in all of the covered topics as well as for any extra-curriculum topics to be covered. Since 1999, more than 750 people have graduated from over 60 training courses. In this paper, details of VPIsystems Industry training program will be presented.

Evaluation of smartphone-based interaction techniques in a CAVE in the context of immersive digital project review

NASA Astrophysics Data System (ADS)

George, Paul; Kemeny, Andras; Colombet, Florent; Merienne, Frédéric; Chardonnet, Jean-Rémy; Thouvenin, Indira Mouttapa

2014-02-01

Immersive digital project reviews consist in using virtual reality (VR) as a tool for discussion between various stakeholders of a project. In the automotive industry, the digital car prototype model is the common thread that binds them. It is used during immersive digital project reviews between designers, engineers, ergonomists, etc. The digital mockup is also used to assess future car architecture, habitability or perceived quality requirements with the aim to reduce using physical mockups for optimized cost, delay and quality efficiency. Among the difficulties identified by the users, handling the mockup is a major one. Inspired by current uses of nomad devices (multi-touch gestures, IPhone UI look'n'feel and AR applications), we designed a navigation technique taking advantage of these popular input devices: Space scrolling allows moving around the mockup. In this paper, we present the results of a study we conducted on the usability and acceptability of the proposed smartphone-based interaction metaphor compared to traditional technique and we provide indications of the most efficient choices for different use-cases accordingly. It was carried out in a traditional 4-sided CAVE and its purpose is to assess a chosen set of interaction techniques to be implemented in Renault's new 5-sides 4K x 4K wall high performance CAVE. The proposed new metaphor using nomad devices is well accepted by novice VR users and future implementation should allow an efficient industrial use. Their use is an easy and user friendly alternative of the existing traditional control devices such as a joystick.

The Personal Digital Library (PDL)-based e-learning: Using the PDL as an e-learning support tool

NASA Astrophysics Data System (ADS)

Deng, Xiaozhao; Ruan, Jianhai

The paper describes a support tool for learners engaged in e-learning, the Personal Digital Library (PDL). The characteristics and functionality of the PDL are presented. Suggested steps for constructing and managing a PDL are outlined and discussed briefly. The authors believe that the PDL as a support tool of e-learning will be important and essential in the future.

Digital Topographic Support System (DTSS).

DTIC Science & Technology

1987-07-29

effects applications software, a word processing package and a Special Purpose Product Builder ( SPPB ) in terms common to his Job. Through the MI, the...communicating with the TA in terms he understands, the applications software, the SPPB and the GIS form the underlying tools which perform the computations and...displayed on the monitors or plotted on paper or Mylar. The SPPB will guide the TA enabling him to design products which are not included in the applications

A real-time, dual processor simulation of the rotor system research aircraft

NASA Technical Reports Server (NTRS)

Mackie, D. B.; Alderete, T. S.

1977-01-01

A real-time, man-in-the loop, simulation of the rotor system research aircraft (RSRA) was conducted. The unique feature of this simulation was that two digital computers were used in parallel to solve the equations of the RSRA mathematical model. The design, development, and implementation of the simulation are documented. Program validation was discussed, and examples of data recordings are given. This simulation provided an important research tool for the RSRA project in terms of safe and cost-effective design analysis. In addition, valuable knowledge concerning parallel processing and a powerful simulation hardware and software system was gained.

Digital Discernment: An E-Commerce Web Site Evaluation Tool

ERIC Educational Resources Information Center

Sigman, Betsy Page; Boston, Brian J.

2013-01-01

Students entering the business workforce today may well share some responsibility for developing, revising, or evaluating their company's Web site. They may lack the experience, however, to critique their employer's Web presence effectively. The purpose of developing Digital Discernment, an e-commerce Web site evaluation tool, was to prepare…

Simple Educational Tool for Digital Speckle Shearography

ERIC Educational Resources Information Center

Spagnolo, Giuseppe Schirripa; Martocchia, Andrea; Papalillo, Donato; Cozzella, Lorenzo

2012-01-01

In this study, an educational tool has been prepared for obtaining short-term and more economic training on digital speckle shearography (DSS). Shearography non-destructive testing (NDT) has gained wide acceptance over the last decade, providing a number of important and exciting inspection solutions in aerospace, electronics and medical device…

The Role of Social Media Tools: Accessible Tourism for Disabled Citizens

ERIC Educational Resources Information Center

Altinay, Zehra; Saner, Tulen; Bahçelerli, Nesrin M.; Altinay, Fahriye

2016-01-01

Knowledge sharing becomes important to accomplish digital citizenship. Social media tools become popular to share and diffuse the knowledge in the digitalization. This social media learning and knowledge sharing platforms provides accessibility to the services within societies especially for disabled citizens. This research study aims to evaluate…

Webbing and Orchestration. Two Interrelated Views on Digital Tools in Mathematics Education

ERIC Educational Resources Information Center

Trouche, Luc; Drijvers, Paul

2014-01-01

The integration of digital tools in mathematics education is considered both promising and problematic. To deal with this issue, notions of "webbing" and "instrumental orchestration" are developed. However, the two seemed to be disconnected, and having different cultural and theoretical roots. In this article, we investigate…

The Power of Digital Storytelling as a Culturally Relevant Health Promotion Tool.

PubMed

Briant, Katherine J; Halter, Amy; Marchello, Nathan; Escareño, Monica; Thompson, Beti

2016-11-01

Digital storytelling is an emergent method in health promotion. It addresses health inequities by combining technology with the voices of members of vulnerable, often underrepresented populations. The overall goal of this pilot project was to explore if digital storytelling could be a culturally relevant health promotion tool for Hispanics/Latinos to share their experiences with cancer, or other diseases. Promotores participated in a train-the-trainer workshop. Community members worked with trained promotores to create digital stories through community workshops. We conducted one-on-one interviews with digital story creators to elicit perspectives and assess their experience. One overarching theme among storytellers was the power of storytelling. Supporting subthemes that emerged in the interviews were (1) connection and communication, (2) lack of opportunities and barriers to telling stories, and (3) potential for disease prevention awareness and education. This study found digital storytelling to be culturally relevant for Hispanics/Latinos of Mexican origin. For these storytellers it was a uniquely valuable tool for sharing personal stories of overcoming or managing health issues. Participants found the digital story experience to be positive and beneficial. It provided a healing outlet to reflect on a difficult experience and find support within one's own community. © 2016 Society for Public Health Education.

The Power of Digital Storytelling as a Culturally Relevant Health Promotion Tool

PubMed Central

Briant, Katherine J.; Halter, Amy; Marchello, Nathan; Escareño, Monica; Thompson, Beti

2016-01-01

Digital storytelling is an emergent method in health promotion. It addresses health inequities by combining technology with the voices of members of vulnerable, often underrepresented populations. The overall goal of this pilot project was to explore if digital storytelling could be a culturally relevant health promotion tool for Hispanics/Latinos to share their experiences with cancer, or other diseases. Promotores participated in a train-the-trainer workshop. Community members worked with trained promotores to create digital stories through community workshops. We conducted one-on-one interviews with digital story creators to elicit perspectives and assess their experience. One overarching theme among storytellers was the power of storytelling. Supporting sub-themes that emerged in the interviews were: (1) connection and communication, (2) lack of opportunities and barriers to telling stories, and (3) potential for disease prevention awareness and education. This study found digital storytelling to be culturally relevant for Hispanics/Latinos of Mexican origin. For these storytellers it was a uniquely valuable tool for sharing personal stories of overcoming or managing health issues. Participants found the digital story experience to be positive and beneficial. It provided a healing outlet to reflect on a difficult experience and find support within one’s own community. PMID:27402721

The Born Digital Graduate: Multiple Representations of and within Digital Humanities PhD Theses

ERIC Educational Resources Information Center

Webb, Sharon; Teehan, Aja; Keating, John

2013-01-01

This chapter examines the production and utilisation of digital tools to create and present a born-digital theses, and in so doing, considers the changing function of traditional theses. It asks how (relatively) new technologies and methodologies should affect the representation and function of graduate scholarship in the Digital Humanities (DH),…

Development and assessment of a digital X-ray software tool to determine vertebral rotation in adolescent idiopathic scoliosis.

PubMed

Eijgenraam, Susanne M; Boselie, Toon F M; Sieben, Judith M; Bastiaenen, Caroline H G; Willems, Paul C; Arts, Jacobus J; Lataster, Arno

2017-02-01

The amount of vertebral rotation in the axial plane is of key importance in the prognosis and treatment of adolescent idiopathic scoliosis (AIS). Current methods to determine vertebral rotation are either designed for use in analogue plain radiographs and not useful in digital images, or lack measurement precision and are therefore less suitable for the follow-up of rotation in AIS patients. This study aimed to develop a digital X-ray software tool with high measurement precision to determine vertebral rotation in AIS, and to assess its (concurrent) validity and reliability. In this study a combination of basic science and reliability methodology applied in both laboratory and clinical settings was used. Software was developed using the algorithm of the Perdriolle torsion meter for analogue AP plain radiographs of the spine. Software was then assessed for (1) concurrent validity and (2) intra- and interobserver reliability. Plain radiographs of both human cadaver vertebrae and outpatient AIS patients were used. Concurrent validity was measured by two independent observers, both experienced in the assessment of plain radiographs. Reliability-measurements were performed by three independent spine surgeons. Pearson correlation of the software compared with the analogue Perdriolle torsion meter for mid-thoracic vertebrae was 0.98, for low-thoracic vertebrae 0.97 and for lumbar vertebrae 0.97. Measurement exactness of the software was within 5° in 62% of cases and within 10° in 97% of cases. Intraclass correlation coefficient (ICC) for inter-observer reliability was 0.92 (0.91-0.95), ICC for intra-observer reliability was 0.96 (0.94-0.97). We developed a digital X-ray software tool to determine vertebral rotation in AIS with a substantial concurrent validity and reliability, which may be useful for the follow-up of vertebral rotation in AIS patients. Copyright © 2015 Elsevier Inc. All rights reserved.

Image tools for UNIX

NASA Technical Reports Server (NTRS)

Banks, David C.

1994-01-01

This talk features two simple and useful tools for digital image processing in the UNIX environment. They are xv and pbmplus. The xv image viewer which runs under the X window system reads images in a number of different file formats and writes them out in different formats. The view area supports a pop-up control panel. The 'algorithms' menu lets you blur an image. The xv control panel also activates the color editor which displays the image's color map (if one exists). The xv image viewer is available through the internet. The pbmplus package is a set of tools designed to perform image processing from within a UNIX shell. The acronym 'pbm' stands for portable bit map. Like xv, the pbm plus tool can convert images from and to many different file formats. The source code and manual pages for pbmplus are also available through the internet. This software is in the public domain.

Understanding the Role of Medical Experts during a Public Health Crisis Digital Tools and Library Resources for Research on the 1918 Spanish Influenza.

PubMed

Ewing, E Thomas; Gad, Samah; Ramakrishnan, Naren; Reznick, Jeffrey S

2014-10-01

Humanities scholars, particularly historians of health and disease, can benefit from digitized library collections and tools such as topic modeling. Using a case study from the 1918 Spanish Flu epidemic, this paper explores the application of a big humanities approach to understanding the impact of a public health official on the course of the disease and the response of the public, as documented through digitized newspapers and medical periodicals.

NGEE Arctic TIR and Digital Photos, Drained Thaw Lake Basin, Barrow, Alaska, July 2015

DOE Data Explorer

Shawn Serbin; Wil Lieberman-Cribbin; Kim Ely; Alistair Rogers

2016-11-01

FLIR thermal infrared (TIR), digital camera photos, and plot notes across the Barrow, Alaska DTLB site. Data were collected together with measurements of canopy spectral reflectance (see associated metadata record (NGEE Arctic HR1024i Canopy Spectral Reflectance, Drained Thaw Lake Basin, Barrow, Alaska, July 2015 ). Data contained within this archive include exported FLIR images (analyzed with FLIR-Tools), digital photos, TIR report, and sample notes. Further TIR image analysis can be conducted in FLIR-Tools.

Digital Documentation: Using Computers to Create Multimedia Reports.

ERIC Educational Resources Information Center

Speitel, Tom; And Others

1996-01-01

Describes methods for creating integrated multimedia documents using recent advances in print, audio, and video digitization that bring added usefulness to computers as data acquisition, processing, and presentation tools. Discusses advantages of digital documentation. (JRH)

Cognitive engineering of film library transition from film medium to digital environment in a Texas teaching hospital.

PubMed

Koperwhats, Martha A; Chang, Wei-Chih; Xiao, Jianguo

2002-01-01

Digital imaging technology promises efficient, economical, and fast service for patient care, but the challenges are great in the transition from film to a filmless (digital) environment. This change has a significant impact on the film library's personnel (film librarians) who play a leading roles in storage, classification, and retrieval of images. The objectives of this project were to study film library errors and the usability of a physical computerized system that could not be changed, while developing an intervention to reduce errors and test the usability of the intervention. Cognitive and human factors analysis were used to evaluate human-computer interaction. A workflow analysis was performed to understand the film and digital imaging processes. User and task analyses were applied to account for all behaviors involved in interaction with the system. A heuristic evaluation was used to probe the usability issues in the picture archiving and communication systems (PACS) modules. Simplified paper-based instructions were designed to familiarize the film librarians with the digital system. A usability survey evaluated the effectiveness of the instruction. The user and task analyses indicated that different users faced challenges based on their computer literacy, education, roles, and frequency of use of diagnostic imaging. The workflow analysis showed that the approaches to using the digital library differ among the various departments. The heuristic evaluation of the PACS modules showed the human-computer interface to have usability issues that prevented easy operation. Simplified instructions were designed for operation of the modules. Usability surveys conducted before and after revision of the instructions showed that performance improved. Cognitive and human factor analysis can help film librarians and other users adapt to the filmless system. Use of cognitive science tools will aid in successful transition of the film library from a film environment to a digital environment.

Digital flight control research

NASA Technical Reports Server (NTRS)

Potter, J. E.; Stern, R. G.; Smith, T. B.; Sinha, P.

1974-01-01

The results of studies which were undertaken to contribute to the design of digital flight control systems, particularly for transport aircraft are presented. In addition to the overall design considerations for a digital flight control system, the following topics are discussed in detail: (1) aircraft attitude reference system design, (2) the digital computer configuration, (3) the design of a typical digital autopilot for transport aircraft, and (4) a hybrid flight simulator.

Automatic Single Event Effects Sensitivity Analysis of a 13-Bit Successive Approximation ADC

NASA Astrophysics Data System (ADS)

Márquez, F.; Muñoz, F.; Palomo, F. R.; Sanz, L.; López-Morillo, E.; Aguirre, M. A.; Jiménez, A.

2015-08-01

This paper presents Analog Fault Tolerant University of Seville Debugging System (AFTU), a tool to evaluate the Single-Event Effect (SEE) sensitivity of analog/mixed signal microelectronic circuits at transistor level. As analog cells can behave in an unpredictable way when critical areas interact with the particle hitting, there is a need for designers to have a software tool that allows an automatic and exhaustive analysis of Single-Event Effects influence. AFTU takes the test-bench SPECTRE design, emulates radiation conditions and automatically evaluates vulnerabilities using user-defined heuristics. To illustrate the utility of the tool, the SEE sensitivity of a 13-bits Successive Approximation Analog-to-Digital Converter (ADC) has been analysed. This circuit was selected not only because it was designed for space applications, but also due to the fact that a manual SEE sensitivity analysis would be too time-consuming. After a user-defined test campaign, it was detected that some voltage transients were propagated to a node where a parasitic diode was activated, affecting the offset cancelation, and therefore the whole resolution of the ADC. A simple modification of the scheme solved the problem, as it was verified with another automatic SEE sensitivity analysis.

Using Digital Storytelling to Teach Psychology: A Preliminary Investigation

ERIC Educational Resources Information Center

Sheafer, Vicki

2017-01-01

Digital storytelling is a technology application that has emerged as a powerful teaching and learning tool that engages both teachers and students. Digital storytelling allows students to become creative storytellers through selecting a topic, conducting research, writing a script, and developing the story. However, the use of digital storytelling…

Science 2.0: When Students Become Digital Citizens

ERIC Educational Resources Information Center

Smith, Ben; Mader, Jared

2016-01-01

Modern science learning requires the use of digital tools and a shift in teaching philosophy and pedagogy. The backbone to this shift rests in a yet unaddressed skill: digital citizenship. The authors discuss the Digital Citizen standard where "students (will) recognize the rights, responsibilities, and opportunities of living, learning, and…

Interactive Digital Technologies' Use in Southwest Nigerian Universities

ERIC Educational Resources Information Center

Agbatogun, Alaba Olaoluwakotansibe

2013-01-01

The interactive digital technologies in education is an effective means used to widen educational opportunities. However, many faculty members do not use or adopt digital technologies as instructional tools. The purpose of this study was to predict faculty members' use of digital technologies in Nigerian Universities. 492 university lecturers from…

42 CFR 37.51 - Interpreting and classifying chest radiographs-digital radiography systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... standard digital chest radiographic images provided for use with the Guidelines for the Use of the ILO... NIOSH-approved standard digital images may be used for classifying digital chest images for pneumoconiosis. Modification of the appearance of the standard images using software tools is not permitted. (d...

Fault tolerant, radiation hard, high performance digital signal processor

NASA Technical Reports Server (NTRS)

Holmann, Edgar; Linscott, Ivan R.; Maurer, Michael J.; Tyler, G. L.; Libby, Vibeke

1990-01-01

An architecture has been developed for a high-performance VLSI digital signal processor that is highly reliable, fault-tolerant, and radiation-hard. The signal processor, part of a spacecraft receiver designed to support uplink radio science experiments at the outer planets, organizes the connections between redundant arithmetic resources, register files, and memory through a shuffle exchange communication network. The configuration of the network and the state of the processor resources are all under microprogram control, which both maps the resources according to algorithmic needs and reconfigures the processing should a failure occur. In addition, the microprogram is reloadable through the uplink to accommodate changes in the science objectives throughout the course of the mission. The processor will be implemented with silicon compiler tools, and its design will be verified through silicon compilation simulation at all levels from the resources to full functionality. By blending reconfiguration with redundancy the processor implementation is fault-tolerant and reliable, and possesses the long expected lifetime needed for a spacecraft mission to the outer planets.

A hybrid intelligence approach to artifact recognition in digital publishing

NASA Astrophysics Data System (ADS)

Vega-Riveros, J. Fernando; Santos Villalobos, Hector J.

2006-02-01

The system presented integrates rule-based and case-based reasoning for artifact recognition in Digital Publishing. In Variable Data Printing (VDP) human proofing could result prohibitive since a job could contain millions of different instances that may contain two types of artifacts: 1) evident defects, like a text overflow or overlapping 2) style-dependent artifacts, subtle defects that show as inconsistencies with regard to the original job design. We designed a Knowledge-Based Artifact Recognition tool for document segmentation, layout understanding, artifact detection, and document design quality assessment. Document evaluation is constrained by reference to one instance of the VDP job proofed by a human expert against the remaining instances. Fundamental rules of document design are used in the rule-based component for document segmentation and layout understanding. Ambiguities in the design principles not covered by the rule-based system are analyzed by case-based reasoning, using the Nearest Neighbor Algorithm, where features from previous jobs are used to detect artifacts and inconsistencies within the document layout. We used a subset of XSL-FO and assembled a set of 44 document samples. The system detected all the job layout changes, while obtaining an overall average accuracy of 84.56%, with the highest accuracy of 92.82%, for overlapping and the lowest, 66.7%, for the lack-of-white-space.

Application of digital human modeling and simulation for vision analysis of pilots in a jet aircraft: a case study.

PubMed

Karmakar, Sougata; Pal, Madhu Sudan; Majumdar, Deepti; Majumdar, Dhurjati

2012-01-01

Ergonomic evaluation of visual demands becomes crucial for the operators/users when rapid decision making is needed under extreme time constraint like navigation task of jet aircraft. Research reported here comprises ergonomic evaluation of pilot's vision in a jet aircraft in virtual environment to demonstrate how vision analysis tools of digital human modeling software can be used effectively for such study. Three (03) dynamic digital pilot models, representative of smallest, average and largest Indian pilot population were generated from anthropometric database and interfaced with digital prototype of the cockpit in Jack software for analysis of vision within and outside the cockpit. Vision analysis tools like view cones, eye view windows, blind spot area, obscuration zone, reflection zone etc. were employed during evaluation of visual fields. Vision analysis tool was also used for studying kinematic changes of pilot's body joints during simulated gazing activity. From present study, it can be concluded that vision analysis tool of digital human modeling software was found very effective in evaluation of position and alignment of different displays and controls in the workstation based upon their priorities within the visual fields and anthropometry of the targeted users, long before the development of its physical prototype.

Interest in a digital health tool in veterans with epilepsy: results of a phone survey.

PubMed

Hixson, John D; Van Bebber, Stephanie L; Bertko, Kate M

2015-04-01

Online tools for managing chronic health conditions are becoming increasingly popular. Perceived benefits include ease of use, low costs, and availability but are contingent on patient engagement, Internet access, and digital literacy. This article describes data collected during the recruitment phase of a study evaluating an online self-management platform for epilepsy in a U.S. Veteran population. We used administrative data to identify and contact Veterans with a likely diagnosis of epilepsy in the Veterans Health Administration (VHA). Veterans who did not respond directly to a mailed invitation were recruited by phone to determine study interest and evaluate digital access. Of the 2,143 Veterans mailed study invitations, phone calls were made to 1,789 who did not specifically decline participation. Among those reached by phone (n = 1,053): 295 (28%) expressed interest in the study and an online tool, 333 (19%) reported a lack of computer and/or Internet access and 425 (40%) were not interested for other reasons. This study suggests an interest in online tools for managing health despite the fact that some Veterans lack computer and/or Internet access. As investment in digital health solutions grows, the VHA should prioritize the widespread provision of digital access to more Veterans. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.

What Are the Influences on Teacher Mobile Technology Self-Efficacy in Secondary School Classrooms?

ERIC Educational Resources Information Center

Tilton, Jo; Hartnett, Maggie

2016-01-01

As digital technologies develop and change, so do the ways these tools are integrated into classrooms. In particular, as mobile digital technologies become ubiquitous there is a need to investigate how teachers engage with these tools--both personally and professionally. Research has consistently shown that teachers' underlying beliefs and…

Assessment in the Digital Age: An Overview of Online Tools and Considerations for School Psychologists and School Counsellors

ERIC Educational Resources Information Center

Jellins, Laura

2015-01-01

With recent developments in technology, online tests and digital tools offer school psychologists and school counsellors alternate modes of assessment. These new technologies have the potential to increase accessibility to tests (through greater portability), allow school psychologists and school counsellors to service more students (through…

Digital Tools for Algebra Education: Criteria and Evaluation

ERIC Educational Resources Information Center

Bokhove, Christian; Drijvers, Paul

2010-01-01

In the Netherlands, as in many other countries, the algebraic expertise of students graduating from secondary education is an issue. The use of digital tools for algebra education is expected to change epistemologies, activity structures and student achievement. Therefore, a study was set up to investigate in what way the use of ICT in upper…

The Use of Digital Tools by Independent Music Teachers

ERIC Educational Resources Information Center

Upitis, Rena; Abrami, Philip C.; Boese, Karen

2016-01-01

The present paper explores two aspects of independent music teachers' views and practices: (a) their views on the importance of self-regulation and (b) how they use tools available on mobile devices to enhance their students' learning. A survey involving 1,468 Canadian teachers revealed that most teachers are comfortable using digital technology.…

Digital Storytelling Teaching Robotics Basics

ERIC Educational Resources Information Center

Scandola, Michele; Fiorini, Paolo

2013-01-01

Digital Storytelling (DST) is a powerful tool for teaching complex concepts. DSTs are typically used in the humanities but several papers have shown that they are also a wonderful tool for the sciences because they are more involving, contextualized and can easily lead to deeper understanding. In the classical use of DST the story is the content,…

Educate at Penn State: Preparing Beginning Teachers with Powerful Digital Tools

ERIC Educational Resources Information Center

Murray, Orrin T.; Zembal-Saul, Carla

2008-01-01

University based teacher education programs are slowly beginning to catch up to other professional programs that use modern digital tools to prepare students to enter professional fields. This discussion looks at how one teacher education program reached the conclusion that students and faculty would use notebook computers. Frequently referred to…

JMorph: Software for performing rapid morphometric measurements on digital images of fossil assemblages

NASA Astrophysics Data System (ADS)

Lelièvre, Peter G.; Grey, Melissa

2017-08-01

Quantitative morphometric analyses of form are widely used in palaeontology, especially for taxonomic and evolutionary research. These analyses can involve several measurements performed on hundreds or even thousands of samples. Performing measurements of size and shape on large assemblages of macro- or microfossil samples is generally infeasible or impossible with traditional instruments such as vernier calipers. Instead, digital image processing software is required to perform measurements via suitable digital images of samples. Many software packages exist for morphometric analyses but there is not much available for the integral stage of data collection, particularly for the measurement of the outlines of samples. Some software exists to automatically detect the outline of a fossil sample from a digital image. However, automatic outline detection methods may perform inadequately when samples have incomplete outlines or images contain poor contrast between the sample and staging background. Hence, a manual digitization approach may be the only option. We are not aware of any software packages that are designed specifically for efficient digital measurement of fossil assemblages with numerous samples, especially for the purposes of manual outline analysis. Throughout several previous studies, we have developed a new software tool, JMorph, that is custom-built for that task. JMorph provides the means to perform many different types of measurements, which we describe in this manuscript. We focus on JMorph's ability to rapidly and accurately digitize the outlines of fossils. JMorph is freely available from the authors.

Visualization and interaction tools for aerial photograph mosaics

NASA Astrophysics Data System (ADS)

Fernandes, João Pedro; Fonseca, Alexandra; Pereira, Luís; Faria, Adriano; Figueira, Helder; Henriques, Inês; Garção, Rita; Câmara, António

1997-05-01

This paper describes the development of a digital spatial library based on mosaics of digital orthophotos, called Interactive Portugal, that will enable users both to retrieve geospatial information existing in the Portuguese National System for Geographic Information World Wide Web server, and to develop local databases connected to the main system. A set of navigation, interaction, and visualization tools are proposed and discussed. They include sketching, dynamic sketching, and navigation capabilities over the digital orthophotos mosaics. Main applications of this digital spatial library are pointed out and discussed, namely for education, professional, and tourism markets. Future developments are considered. These developments are related to user reactions, technological advancements, and projects that also aim at delivering and exploring digital imagery on the World Wide Web. Future capabilities for site selection and change detection are also considered.

Detecting European Rabbit ( Oryctolagus cuniculus) Disease Outbreaks by Monitoring Digital Media.

PubMed

Peacock, David E; Grillo, Tiggy L

2018-04-18

  Digital media and digital search tools offer simple and effective means to monitor for pathogens and disease outbreaks in target organisms. Using tools such as Rich Site Summary feeds, and Google News and Google Scholar specific key word searches, international digital media were actively monitored from 2012 to 2016 for pathogens and disease outbreaks in the taxonomic order Lagomorpha, with a specific focus on the European rabbit ( Oryctolagus cuniculus). The primary objective was identifying pathogens for assessment as potential new biocontrol agents for Australia's pest populations of the European rabbit. A number of pathogens were detected in digital media reports. Additional benefits arose in the regular provision of case reports and research on myxomatosis and rabbit haemorrhagic disease virus that assisted with current research.

Characterizing stroke lesions using digital templates and lesion quantification tools in a web-based imaging informatics system for a large-scale stroke rehabilitation clinical trial

NASA Astrophysics Data System (ADS)

Wang, Ximing; Edwardson, Matthew; Dromerick, Alexander; Winstein, Carolee; Wang, Jing; Liu, Brent

2015-03-01

Previously, we presented an Interdisciplinary Comprehensive Arm Rehabilitation Evaluation (ICARE) imaging informatics system that supports a large-scale phase III stroke rehabilitation trial. The ePR system is capable of displaying anonymized patient imaging studies and reports, and the system is accessible to multiple clinical trial sites and users across the United States via the web. However, the prior multicenter stroke rehabilitation trials lack any significant neuroimaging analysis infrastructure. In stroke related clinical trials, identification of the stroke lesion characteristics can be meaningful as recent research shows that lesion characteristics are related to stroke scale and functional recovery after stroke. To facilitate the stroke clinical trials, we hope to gain insight into specific lesion characteristics, such as vascular territory, for patients enrolled into large stroke rehabilitation trials. To enhance the system's capability for data analysis and data reporting, we have integrated new features with the system: a digital brain template display, a lesion quantification tool and a digital case report form. The digital brain templates are compiled from published vascular territory templates at each of 5 angles of incidence. These templates were updated to include territories in the brainstem using a vascular territory atlas and the Medical Image Processing, Analysis and Visualization (MIPAV) tool. The digital templates are displayed for side-by-side comparisons and transparent template overlay onto patients' images in the image viewer. The lesion quantification tool quantifies planimetric lesion area from user-defined contour. The digital case report form stores user input into a database, then displays contents in the interface to allow for reviewing, editing, and new inputs. In sum, the newly integrated system features provide the user with readily-accessible web-based tools to identify the vascular territory involved, estimate lesion area, and store these results in a web-based digital format.

EnergyPlus Graphical User Interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

2011-01-04

LBNL, Infosys Technologies and Digital Alchemy are developing a free, comprehensive graphical user interface (GUI) that will enable EnergyPlus to be used more easily and effectively by building designers and other professionals, facilitating its widespread adoption. User requirements have been defined through a series of practitioner workshops. A new schematic editor for HVAC systems will be combined with different building envelope geometry generation tools and IFC-based BIM import and export. LBNL and Digital Alchemy have generated a detailed function requirements specification, which is being implemented in software by Infosys, LBNL and and Digital Alchemy. LBNL and practitioner subcontractors will developmore » a comprehensive set of templates and libraries and will perform extensive testing of the GUI before it is released in Q3 2011. It is planned to use an Open Platfom approach, in which a comprehensive set of well documented Application Programming Interfaces (API's) would be provided to facilitate both the development of third party contributions to the official, standard GUI and the development of derivative works.« less

Physical and digital simulations for IVA robotics

NASA Technical Reports Server (NTRS)

Hinman, Elaine; Workman, Gary L.

1992-01-01

Space based materials processing experiments can be enhanced through the use of IVA robotic systems. A program to determine requirements for the implementation of robotic systems in a microgravity environment and to develop some preliminary concepts for acceleration control of small, lightweight arms has been initiated with the development of physical and digital simulation capabilities. The physical simulation facilities incorporate a robotic workcell containing a Zymark Zymate II robot instrumented for acceleration measurements, which is able to perform materials transfer functions while flying on NASA's KC-135 aircraft during parabolic manuevers to simulate reduced gravity. Measurements of accelerations occurring during the reduced gravity periods will be used to characterize impacts of robotic accelerations in a microgravity environment in space. Digital simulations are being performed with TREETOPS, a NASA developed software package which is used for the dynamic analysis of systems with a tree topology. Extensive use of both simulation tools will enable the design of robotic systems with enhanced acceleration control for use in the space manufacturing environment.

Tangible display systems: bringing virtual surfaces into the real world

NASA Astrophysics Data System (ADS)

Ferwerda, James A.

2012-03-01

We are developing tangible display systems that enable natural interaction with virtual surfaces. Tangible display systems are based on modern mobile devices that incorporate electronic image displays, graphics hardware, tracking systems, and digital cameras. Custom software allows the orientation of a device and the position of the observer to be tracked in real-time. Using this information, realistic images of surfaces with complex textures and material properties illuminated by environment-mapped lighting, can be rendered to the screen at interactive rates. Tilting or moving in front of the device produces realistic changes in surface lighting and material appearance. In this way, tangible displays allow virtual surfaces to be observed and manipulated as naturally as real ones, with the added benefit that surface geometry and material properties can be modified in real-time. We demonstrate the utility of tangible display systems in four application areas: material appearance research; computer-aided appearance design; enhanced access to digital library and museum collections; and new tools for digital artists.

Designing, Prototyping and Evaluating Digital Mindfulness Applications: A Case Study of Mindful Breathing for Stress Reduction.

PubMed

Zhu, Bin; Hedman, Anders; Feng, Shuo; Li, Haibo; Osika, Walter

2017-06-14

During the past decade, there has been a rapid increase of interactive apps designed for health and well-being. Yet, little research has been published on developing frameworks for design and evaluation of digital mindfulness facilitating technologies. Moreover, many existing digital mindfulness applications are purely software based. There is room for further exploration and assessment of designs that make more use of physical qualities of artifacts. The study aimed to develop and test a new physical digital mindfulness prototype designed for stress reduction. In this case study, we designed, developed, and evaluated HU, a physical digital mindfulness prototype designed for stress reduction. In the first phase, we used vapor and light to support mindful breathing and invited 25 participants through snowball sampling to test HU. In the second phase, we added sonification. We deployed a package of probes such as photos, diaries, and cards to collect data from users who explored HU in their homes. Thereafter, we evaluated our installation using both self-assessed stress levels and heart rate (HR) and heart rate variability (HRV) measures in a pilot study, in order to measure stress resilience effects. After the experiment, we performed a semistructured interview to reflect on HU and investigate the design of digital mindfulness apps for stress reduction. The results of the first phase showed that 22 of 25 participants (88%) claimed vapor and light could be effective ways of promoting mindful breathing. Vapor could potentially support mindful breathing better than light (especially for mindfulness beginners). In addition, a majority of the participants mentioned sound as an alternative medium. In the second phase, we found that participants thought that HU could work well for stress reduction. We compared the effect of silent HU (using light and vapor without sound) and sonified HU on 5 participants. Subjective stress levels were statistically improved with both silent and sonified HU. The mean value of HR using silent HU was significantly lower than resting baseline and sonified HU. The mean value of root mean square of differences (RMSSD) using silent HU was significantly higher than resting baseline. We found that the differences between our objective and subjective assessments were intriguing and prompted us to investigate them further. Our evaluation of HU indicated that HU could facilitate relaxed breathing and stress reduction. There was a difference in outcome between the physiological measures of stress and the subjective reports of stress, as well as a large intervariability among study participants. Our conclusion is that the use of stress reduction tools should be customized and that the design work of mindfulness technology for stress reduction is a complex process, which requires cooperation of designers, HCI (Human-Computer Interaction) experts and clinicians. ©Bin Zhu, Anders Hedman, Shuo Feng, Haibo Li, Walter Osika. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 14.06.2017.

Open source tools for management and archiving of digital microscopy data to allow integration with patient pathology and treatment information

PubMed Central

2013-01-01

Background Virtual microscopy includes digitisation of histology slides and the use of computer technologies for complex investigation of diseases such as cancer. However, automated image analysis, or website publishing of such digital images, is hampered by their large file sizes. Results We have developed two Java based open source tools: Snapshot Creator and NDPI-Splitter. Snapshot Creator converts a portion of a large digital slide into a desired quality JPEG image. The image is linked to the patient’s clinical and treatment information in a customised open source cancer data management software (Caisis) in use at the Australian Breast Cancer Tissue Bank (ABCTB) and then published on the ABCTB website (http://www.abctb.org.au) using Deep Zoom open source technology. Using the ABCTB online search engine, digital images can be searched by defining various criteria such as cancer type, or biomarkers expressed. NDPI-Splitter splits a large image file into smaller sections of TIFF images so that they can be easily analysed by image analysis software such as Metamorph or Matlab. NDPI-Splitter also has the capacity to filter out empty images. Conclusions Snapshot Creator and NDPI-Splitter are novel open source Java tools. They convert digital slides into files of smaller size for further processing. In conjunction with other open source tools such as Deep Zoom and Caisis, this suite of tools is used for the management and archiving of digital microscopy images, enabling digitised images to be explored and zoomed online. Our online image repository also has the capacity to be used as a teaching resource. These tools also enable large files to be sectioned for image analysis. Virtual Slides The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/5330903258483934 PMID:23402499

Design and Development of a Web-Based DOD PKI Common Access Card (CAC) Instruction Tool

DTIC Science & Technology

2004-03-01

institute internal training programs…to help educate the appropriate personnel” (p. 269). This section indicates the need for training when...of “digital certificates” that provide for the integrity and authenticity of the user to public key value binding. • Though public keys can be...known as a digest) is a unique, fixed- length mathematical value that is determined by the content of the message and the ‘hashing’ algorithm used

A Digital Lock-In Amplifier for Use at Temperatures of up to 200 °C

PubMed Central

Cheng, Jingjing; Xu, Yingjun; Wu, Lei; Wang, Guangwei

2016-01-01

Weak voltage signals cannot be reliably measured using currently available logging tools when these tools are subject to high-temperature (up to 200 °C) environments for prolonged periods. In this paper, we present a digital lock-in amplifier (DLIA) capable of operating at temperatures of up to 200 °C. The DLIA contains a low-noise instrument amplifier and signal acquisition and the corresponding signal processing electronics. The high-temperature stability of the DLIA is achieved by designing system-in-package (SiP) and multi-chip module (MCM) components with low thermal resistances. An effective look-up-table (LUT) method was developed for the lock-in amplifier algorithm, to decrease the complexity of the calculations and generate less heat than the traditional way. The performance of the design was tested by determining the linearity, gain, Q value, and frequency characteristic of the DLIA between 25 and 200 °C. The maximal nonlinear error in the linearity of the DLIA working at 200 °C was about 1.736% when the equivalent input was a sine wave signal with an amplitude of between 94.8 and 1896.0 nV and a frequency of 800 kHz. The tests showed that the DLIA proposed could work effectively in high-temperature environments up to 200 °C. PMID:27845710

Examining the Characteristics of Digital Learning Games Designed by In-Service Teachers

ERIC Educational Resources Information Center

An, Yun-Jo; Cao, Li

2017-01-01

In order to better understand teachers' perspectives on the design and development of digital game-based learning environments, this study examined the characteristics of digital learning games designed by teachers. In addition, this study explored how game design and peer critique activities influenced their perceptions of digital game-based…

Pilot study of digital tools to support multimodal hand hygiene in a clinical setting.

PubMed

Thirkell, Gary; Chambers, Joanne; Gilbart, Wayne; Thornhill, Kerrill; Arbogast, James; Lacey, Gerard

2018-03-01

Digital tools for hand hygiene do not share data, limiting their potential to support multimodal programs. The Christie NHS Foundation Trust, United Kingdom, worked with GOJO (in the United States), MEG (in Ireland), and SureWash (in Ireland) to integrate their systems and pilot their combined use in a clinical setting. A 28-bed medical oncology unit piloted the system for 5 weeks. Live data from the tools were combined to create a novel combined risk status metric that was displayed publicly and via a management Web site. The combined risk status reduced over the pilot period. However, larger and longer duration studies are required to reach statistical significance. Staff and especially patient reaction was positive in that 70% of the hand hygiene training events were by patients. The digital tools did not negatively impact clinical workflow and received positive engagement from staff and patients. The combined risk status did not change significantly over the short pilot period because there was also no specific hand hygiene improvement campaign underway at the time of the pilot study. The results indicate that integrated digital tools can provide both rich data and novel tools that both measure impact and provide feedback to support the implementation of multimodal hand hygiene campaigns, reducing the need for significant additional personnel resources. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. All rights reserved.

The complete digital workflow in fixed prosthodontics: a systematic review.

PubMed

Joda, Tim; Zarone, Fernando; Ferrari, Marco

2017-09-19

The continuous development in dental processing ensures new opportunities in the field of fixed prosthodontics in a complete virtual environment without any physical model situations. The aim was to compare fully digitalized workflows to conventional and/or mixed analog-digital workflows for the treatment with tooth-borne or implant-supported fixed reconstructions. A PICO strategy was executed using an electronic (MEDLINE, EMBASE, Google Scholar) plus manual search up to 2016-09-16 focusing on RCTs investigating complete digital workflows in fixed prosthodontics with regard to economics or esthetics or patient-centered outcomes with or without follow-up or survival/success rate analysis as well as complication assessment of at least 1 year under function. The search strategy was assembled from MeSH-Terms and unspecific free-text words: {(("Dental Prosthesis" [MeSH]) OR ("Crowns" [MeSH]) OR ("Dental Prosthesis, Implant-Supported" [MeSH])) OR ((crown) OR (fixed dental prosthesis) OR (fixed reconstruction) OR (dental bridge) OR (implant crown) OR (implant prosthesis) OR (implant restoration) OR (implant reconstruction))} AND {("Computer-Aided Design" [MeSH]) OR ((digital workflow) OR (digital technology) OR (computerized dentistry) OR (intraoral scan) OR (digital impression) OR (scanbody) OR (virtual design) OR (digital design) OR (cad/cam) OR (rapid prototyping) OR (monolithic) OR (full-contour))} AND {("Dental Technology" [MeSH) OR ((conventional workflow) OR (lost-wax-technique) OR (porcelain-fused-to-metal) OR (PFM) OR (implant impression) OR (hand-layering) OR (veneering) OR (framework))} AND {(("Study, Feasibility" [MeSH]) OR ("Survival" [MeSH]) OR ("Success" [MeSH]) OR ("Economics" [MeSH]) OR ("Costs, Cost Analysis" [MeSH]) OR ("Esthetics, Dental" [MeSH]) OR ("Patient Satisfaction" [MeSH])) OR ((feasibility) OR (efficiency) OR (patient-centered outcome))}. Assessment of risk of bias in selected studies was done at a 'trial level' including random sequence generation, allocation concealment, blinding, completeness of outcome data, selective reporting, and other bias using the Cochrane Collaboration tool. A judgment of risk of bias was assigned if one or more key domains had a high or unclear risk of bias. An official registration of the systematic review was not performed. The systematic search identified 67 titles, 32 abstracts thereof were screened, and subsequently, three full-texts included for data extraction. Analysed RCTs were heterogeneous without follow-up. One study demonstrated that fully digitally produced dental crowns revealed the feasibility of the process itself; however, the marginal precision was lower for lithium disilicate (LS2) restorations (113.8 μm) compared to conventional metal-ceramic (92.4 μm) and zirconium dioxide (ZrO2) crowns (68.5 μm) (p < 0.05). Another study showed that leucite-reinforced glass ceramic crowns were esthetically favoured by the patients (8/2 crowns) and clinicians (7/3 crowns) (p < 0.05). The third study investigated implant crowns. The complete digital workflow was more than twofold faster (75.3 min) in comparison to the mixed analog-digital workflow (156.6 min) (p < 0.05). No RCTs could be found investigating multi-unit fixed dental prostheses (FDP). The number of RCTs testing complete digital workflows in fixed prosthodontics is low. Scientifically proven recommendations for clinical routine cannot be given at this time. Research with high-quality trials seems to be slower than the industrial progress of available digital applications. Future research with well-designed RCTs including follow-up observation is compellingly necessary in the field of complete digital processing.

The use of digital images in pathology.

PubMed

Furness, P N

1997-11-01

Digital images are routinely used by the publishing industry, but most diagnostic pathologists are unfamiliar with the technology and its possibilities. This review aims to explain the basic principles of digital image acquisition, storage, manipulation and use, and the possibilities provided not only in research, but also in teaching and in routine diagnostic pathology. Images of natural objects are usually expressed digitally as 'bitmaps'--rectilinear arrays of small dots. The size of each dot can vary, but so can its information content in terms, for example, of colour, greyscale or opacity. Various file formats and compression algorithms are available. Video cameras connected to microscopes are familiar to most pathologists; video images can be converted directly to a digital form by a suitably equipped computer. Digital cameras and scanners are alternative acquisition tools of relevance to pathologists. Once acquired, a digital image can easily be subjected to the digital equivalent of any conventional darkroom manipulation and modern software allows much more flexibility, to such an extent that a new tool for scientific fraud has been created. For research, image enhancement and analysis is an increasingly powerful and affordable tool. Morphometric measurements are, after many predictions, at last beginning to be part of the toolkit of the diagnostic pathologist. In teaching, the potential to create dramatic yet informative presentations is demonstrated daily by the publishing industry; such methods are readily applicable to the classroom. The combination of digital images and the Internet raises many possibilities; for example, instead of seeking one expert diagnostic opinion, one could simultaneously seek the opinion of many, all around the globe. It is inevitable that in the coming years the use of digital images will spread from the laboratory to the medical curriculum and to the whole of diagnostic pathology.

Metadata Wizard: an easy-to-use tool for creating FGDC-CSDGM metadata for geospatial datasets in ESRI ArcGIS Desktop

USGS Publications Warehouse

Ignizio, Drew A.; O'Donnell, Michael S.; Talbert, Colin B.

2014-01-01

Creating compliant metadata for scientific data products is mandated for all federal Geographic Information Systems professionals and is a best practice for members of the geospatial data community. However, the complexity of the The Federal Geographic Data Committee’s Content Standards for Digital Geospatial Metadata, the limited availability of easy-to-use tools, and recent changes in the ESRI software environment continue to make metadata creation a challenge. Staff at the U.S. Geological Survey Fort Collins Science Center have developed a Python toolbox for ESRI ArcDesktop to facilitate a semi-automated workflow to create and update metadata records in ESRI’s 10.x software. The U.S. Geological Survey Metadata Wizard tool automatically populates several metadata elements: the spatial reference, spatial extent, geospatial presentation format, vector feature count or raster column/row count, native system/processing environment, and the metadata creation date. Once the software auto-populates these elements, users can easily add attribute definitions and other relevant information in a simple Graphical User Interface. The tool, which offers a simple design free of esoteric metadata language, has the potential to save many government and non-government organizations a significant amount of time and costs by facilitating the development of The Federal Geographic Data Committee’s Content Standards for Digital Geospatial Metadata compliant metadata for ESRI software users. A working version of the tool is now available for ESRI ArcDesktop, version 10.0, 10.1, and 10.2 (downloadable at http:/www.sciencebase.gov/metadatawizard).

Software Tools for Developing and Simulating the NASA LaRC CMF Motion Base

NASA Technical Reports Server (NTRS)

Bryant, Richard B., Jr.; Carrelli, David J.

2006-01-01

The NASA Langley Research Center (LaRC) Cockpit Motion Facility (CMF) motion base has provided many design and analysis challenges. In the process of addressing these challenges, a comprehensive suite of software tools was developed. The software tools development began with a detailed MATLAB/Simulink model of the motion base which was used primarily for safety loads prediction, design of the closed loop compensator and development of the motion base safety systems1. A Simulink model of the digital control law, from which a portion of the embedded code is directly generated, was later added to this model to form a closed loop system model. Concurrently, software that runs on a PC was created to display and record motion base parameters. It includes a user interface for controlling time history displays, strip chart displays, data storage, and initializing of function generators used during motion base testing. Finally, a software tool was developed for kinematic analysis and prediction of mechanical clearances for the motion system. These tools work together in an integrated package to support normal operations of the motion base, simulate the end to end operation of the motion base system providing facilities for software-in-the-loop testing, mechanical geometry and sensor data visualizations, and function generator setup and evaluation.

The Visual Geophysical Exploration Environment: A Multi-dimensional Scientific Visualization

NASA Astrophysics Data System (ADS)

Pandya, R. E.; Domenico, B.; Murray, D.; Marlino, M. R.

2003-12-01

The Visual Geophysical Exploration Environment (VGEE) is an online learning environment designed to help undergraduate students understand fundamental Earth system science concepts. The guiding principle of the VGEE is the importance of hands-on interaction with scientific visualization and data. The VGEE consists of four elements: 1) an online, inquiry-based curriculum for guiding student exploration; 2) a suite of El Nino-related data sets adapted for student use; 3) a learner-centered interface to a scientific visualization tool; and 4) a set of concept models (interactive tools that help students understand fundamental scientific concepts). There are two key innovations featured in this interactive poster session. One is the integration of concept models and the visualization tool. Concept models are simple, interactive, Java-based illustrations of fundamental physical principles. We developed eight concept models and integrated them into the visualization tool to enable students to probe data. The ability to probe data using a concept model addresses the common problem of transfer: the difficulty students have in applying theoretical knowledge to everyday phenomenon. The other innovation is a visualization environment and data that are discoverable in digital libraries, and installed, configured, and used for investigations over the web. By collaborating with the Integrated Data Viewer developers, we were able to embed a web-launchable visualization tool and access to distributed data sets into the online curricula. The Thematic Real-time Environmental Data Distributed Services (THREDDS) project is working to provide catalogs of datasets that can be used in new VGEE curricula under development. By cataloging this curricula in the Digital Library for Earth System Education (DLESE), learners and educators can discover the data and visualization tool within a framework that guides their use.

Using a Digital Game as an Advance Organizer

ERIC Educational Resources Information Center

Denham, André R.

2018-01-01

The use of digital games as an instructional tool has garnered increasing attention in the education community. Empirical work supported by theory on the learning affordances of digital games allowed the game-based learning community to arrive at the consensus that digital games provide an excellent medium for the acquisition of skills and the…

Interactive Digital Signal Processor

NASA Technical Reports Server (NTRS)

Mish, W. H.

1985-01-01

Interactive Digital Signal Processor, IDSP, consists of set of time series analysis "operators" based on various algorithms commonly used for digital signal analysis. Processing of digital signal time series to extract information usually achieved by applications of number of fairly standard operations. IDSP excellent teaching tool for demonstrating application for time series operators to artificially generated signals.

Are Digital Natives a Myth or Reality? University Students' Use of Digital Technologies

ERIC Educational Resources Information Center

Margaryan, Anoush; Littlejohn, Allison; Vojt, Gabrielle

2011-01-01

This study investigated the extent and nature of university students' use of digital technologies for learning and socialising. The findings show that students use a limited range of mainly established technologies. Use of collaborative knowledge creation tools, virtual worlds, and social networking sites was low. "Digital natives" and students of…