Programming Not Required: Skills and Knowledge for the Digital Library Environment

ERIC Educational Resources Information Center

Howard, Katherine

2010-01-01

Education for Library and Information professionals in managing the digital environment has been a key topic for discussion within the LIS environment for some time. However, before designing and implementing a program for digital library education, it is prudent to ensure that the skills and knowledge required to work in this environment are…

Construction of a Digital Learning Environment Based on Cloud Computing

ERIC Educational Resources Information Center

Ding, Jihong; Xiong, Caiping; Liu, Huazhong

2015-01-01

Constructing the digital learning environment for ubiquitous learning and asynchronous distributed learning has opened up immense amounts of concrete research. However, current digital learning environments do not fully fulfill the expectations on supporting interactive group learning, shared understanding and social construction of knowledge.…

Application of digital image correlation for long-distance bridge deflection measurement

NASA Astrophysics Data System (ADS)

Tian, Long; Pan, Bing; Cai, Youfa; Liang, Hui; Zhao, Yan

2013-06-01

Due to its advantages of non-contact, full-field and high-resolution measurement, digital image correlation (DIC) method has gained wide acceptance and found numerous applications in the field of experimental mechanics. In this paper, the application of DIC for real-time long-distance bridge deflection detection in outdoor environments is studied. Bridge deflection measurement using DIC in outdoor environments is more challenging than regular DIC measurements performed under laboratory conditions. First, much more image noise due to variations in ambient light will be presented in the images recorded in outdoor environments. Second, how to select the target area becomes a key factor because long-distance imaging results in a large field of view of the test object. Finally, the image acquisition speed of the camera must be high enough (larger than 100 fps) to capture the real-time dynamic motion of a bridge. In this work, the above challenging issues are addressed and several improvements were made to DIC method. The applicability was demonstrated by real experiments. Experimental results indicate that the DIC method has great potentials in motion measurement in various large building structures.

Digital Games for Learning Mathematics: Possibilities and Limitations

ERIC Educational Resources Information Center

Jorgensen, Robyn; Lowrie, Tom

2012-01-01

Drawing from Gee's learning principles developed from the digital games environment, we provide a critical analysis of the difference between using these principles in a literacy environment as opposed to a mathematical environment. Using stimulated recall, primary school-aged students played with a number of contemporary digital games. Feedback…

Glitch game testers: The design and study of a learning environment for computational production with young African American males

NASA Astrophysics Data System (ADS)

DiSalvo, Elizabeth Betsy

The implementation of a learning environment for young African American males, called the Glitch Game Testers, was launched in 2009. The development of this program was based on formative work that looked at the contrasting use of digital games between young African American males and individuals who chose to become computer science majors. Through analysis of cultural values and digital game play practices, the program was designed to intertwine authentic game development practices and computer science learning. The resulting program employed 25 African American male high school students to test pre-release digital games full-time in the summer and part-time in the school year, with an hour of each day dedicated to learning introductory computer science. Outcomes for persisting in computer science education are remarkable; of the 16 participants who had graduated from high school as of 2012, 12 have gone on to school in computing-related majors. These outcomes, and the participants' enthusiasm for engaging in computing, are in sharp contrast to the crisis in African American male education and learning motivation. The research presented in this dissertation discusses the formative research that shaped the design of Glitch, the evaluation of the implementation of Glitch, and a theoretical investigation of the way in which participants navigated conflicting motivations in learning environments.

Transforming System Engineering through Model-Centric Engineering

DTIC Science & Technology

2015-11-18

best practices and provide computational technologies for real-time training within digital engineering environments  Multidisciplinary System...MBSE well due to continued training and practicing . While MBSE is a part of the MCE it does not encompass the full idea and enabling technologies of... practices against other Industry contractors and it was believed that ABC was trailing the others in the use of MDAO capabilities. They decided that

The role of digital health in making progress toward Sustainable Development Goal (SDG) 3 in conflict-affected populations.

PubMed

Asi, Yara M; Williams, Cynthia

2018-06-01

The progress of the Millennium Development Goals (MDGs) shows that sustained global action can achieve success. Despite the unprecedented achievements in health and education, more than one billion people, many of them in conflict-affected areas, were unable to reap the benefits of the MDG gains. The recently developed Sustainable Development Goals (SDGs) are even more ambitious then their predecessor. SDG 3 prioritizes health and well-being for all ages in specific areas such as maternal mortality, communicable diseases, mental health, and healthcare workforce. However, without a shift in the approach used for conflict-affected areas, the world's most vulnerable people risk being left behind in global development yet again. We must engage in meaningful discussions about employing innovative strategies to address health challenges fragile, low-resource, and often remote settings. In this paper, we will argue that to meet the ambitious health goals of SDG 3, digital health can help to bridge healthcare gaps in conflict-affected areas. First, we describe the health needs of populations in conflict-affected environments, and how they overlap with the SDG 3 targets. Secondly, we discuss how digital health can address the unique needs of conflict-affected areas. Finally, we evaluate the various challenges in deploying digital technologies in fragile environments, and discuss potential policy solutions. Persons in conflict-affected areas may benefit from the diffusive nature of digital health tools. Innovations using cellular technology or cloud-based solutions overcome physical barriers. Additionally, many of the targets of SDG 3 could see significant progress if efficacious education and outreach efforts were supported, and digital health in the form of mHealth and telehealth offers a relatively low-resource platform for these initiatives. Lastly, lack of data collection, especially in conflict-affected or otherwise fragile states, was one of the primary limitations of the MDGs. Greater investment in data collection efforts, supported by digital health technologies, is necessary if SDG 3 targets are to be measured and progress assessed. Standardized EMR systems as well as context-specific data warehousing efforts will assist in collecting and managing accurate data. Stakeholders such as patients, providers, and NGOs, must be proactive and collaborative in their efforts for continuous progress toward SDG 3. Digital health can assist in these inter-organizational communication efforts. The SDGS are complex, ambitious, and comprehensive; even in the most stable environments, achieving full completion towards every goal will be difficult, and in conflict-affected environments, this challenge is much greater. By engaging in a collaborative framework and using the appropriate digital health tools, we can support humanitarian efforts to realize sustained progress in SDG 3 outcomes. Copyright © 2017 Elsevier B.V. All rights reserved.

The Effects of Virtual Weather on Presence

NASA Astrophysics Data System (ADS)

Wissmath, Bartholomäus; Weibel, David; Mast, Fred W.

In modern societies people tend to spend more time in front of computer screens than outdoors. Along with an increasing degree of realism displayed in digital environments, simulated weather appears more and more realistic and more often implemented in digital environments. Research has found that the actual weather influences behavior and mood. In this paper we experimentally examine the effects of virtual weather on the sense of presence. Thereby we found individuals (N=30) to immerse deeper in digital environments displaying fair weather conditions than in environments displaying bad weather. We also investigate whether virtual weather can influence behavior. The possible implications of theses findings for presence theory as well as digital environment designers will be discussed.

Analog Design for Digital Deployment of a Serious Leadership Game

NASA Technical Reports Server (NTRS)

Maxwell, Nicholas; Lang, Tristan; Herman, Jeffrey L.; Phares, Richard

2012-01-01

This paper presents the design, development, and user testing of a leadership development simulation. The authors share lessons learned from using a design process for a board game to allow for quick and inexpensive revision cycles during the development of a serious leadership development game. The goal of this leadership simulation is to accelerate the development of leadership capacity in high-potential mid-level managers (GS-15 level) in a federal government agency. Simulation design included a mixed-method needs analysis, using both quantitative and qualitative approaches to determine organizational leadership needs. Eight design iterations were conducted, including three user testing phases. Three re-design iterations followed initial development, enabling game testing as part of comprehensive instructional events. Subsequent design, development and testing processes targeted digital application to a computer- and tablet-based environment. Recommendations include pros and cons of development and learner testing of an initial analog simulation prior to full digital simulation development.

Digital Native and Digital Immigrant Use of Scholarly Network for Doctoral Learners

ERIC Educational Resources Information Center

Berman, Ronald; Hassell, Deliesha

2014-01-01

The Doctoral Community Network (DC) is a learner driven, scholarly community designed to help online doctoral learners successfully complete their dissertation and program of study. While digital natives grew up in an environment immersed in technology, digital immigrants adapted to this environment through their ability to learn and adjust to…

Enhancing Writing Achievement through a Digital Learning Environment: Case Studies of Three Struggling Adolescent Male Writers

ERIC Educational Resources Information Center

Pruden, Manning; Kerkhoff, Shea N.; Spires, Hiller A.; Lester, James

2017-01-01

The aim of this study was to explore how "Narrative Theatre," a narrative-centered digital learning environment, supported the writing processes of 3 struggling adolescent male writers. We utilized a multicase study approach to capture 3 sixth-grade participants' experiences with the digital learning environment before, during, and after…

The Instructional Instrument SL-EDGE Student Library-Educational DiGital Environment.

ERIC Educational Resources Information Center

Kyriakopoulou, Antonia; Kalamboukis, Theodore

An educational digital environment that will provide appropriate methods and techniques for the support and enhancement of the educational and learning process is a valuable tool for both educators and learners. In the context of such a mission, the educational tool SL-EDGE (Student Library-Educational DiGital Environment) has been developed. The…

Open Access to Research Articles and Data: Library Roles

NASA Astrophysics Data System (ADS)

Joseph, Heather

2015-08-01

Over the past decade, a handful of key developments have caused scholars and researchers to rethink not only the way they conduct their work, but also the way in which they communicate it to others. The advent of the Internet has provided unprecedented opportunities for immediate, cost effective global connectivity, opening up new possibilities for collaboration and communication. This has resulted in scholarship increasingly being conducted in the online environment, and a vast amount of new digital information being generated and made widely available to those interested in using it. Additionally, the Internet is a dynamic environment, with new channels for producing and sharing information in a myriad of formats emerging frequently.In higher education, the momentum of the burgeoning movement towards "open" sharing of information of all kinds continues to gain traction. In particular, advancements in the areas of opening up access to articles and reserch data are increasingly visible. In both of these areas, academic and research libraries are playing important, central roles in promoting the awareness of the potential costs and benefits of a more open research environment, as well as defining new roles for libraries in this digital environment.As this push for grater openness continues, these fronts are intersecting in interesting and potentially transformative ways. The Open Access and Open Data movements share fundamental philosophical commonalities that make collaboration a natural outcome. Both movements place a premium on reducing barriers to discovering and accessing pertinent digital information. Perhaps even more significantly, both explicitly recognize that enabling productive use of digital information is key to unlocking its full value. As a result of these shared priorities, there are a wide variety of common strategies that libraries can take to help advance research, presenting new opportunities for deeper collaboration to take place.This talk will explore what is happening in these "open" movements from both a practical and policy standpoint; how this might directly impact academia, the research community, and especially, libraries.

How Customer Facing Professionals Adapt to Changing Customer Needs in a Digital Environment: A Single Case Study

ERIC Educational Resources Information Center

Hendriks, Stefan

2017-01-01

This qualitative single case study explored how customer facing professionals (CFPs) adapt to changing customer needs in a digital environment. This study focuses on: (1) Changing customer needs; (2) Competencies needed in a digital environment; (3) How they learn; and (4) What factors help or hinder their success. The site is a global Human…

21 CFR 892.1715 - Full-field digital mammography system.

Code of Federal Regulations, 2012 CFR

2012-04-01

... planar digital x-ray images of the entire breast. This generic type of device may include digital mammography acquisition software, full-field digital image receptor, acquisition workstation, automatic exposure control, image processing and reconstruction programs, patient and equipment supports, component...

21 CFR 892.1715 - Full-field digital mammography system.

Code of Federal Regulations, 2013 CFR

2013-04-01

... planar digital x-ray images of the entire breast. This generic type of device may include digital mammography acquisition software, full-field digital image receptor, acquisition workstation, automatic exposure control, image processing and reconstruction programs, patient and equipment supports, component...

21 CFR 892.1715 - Full-field digital mammography system.

Code of Federal Regulations, 2014 CFR

2014-04-01

... planar digital x-ray images of the entire breast. This generic type of device may include digital mammography acquisition software, full-field digital image receptor, acquisition workstation, automatic exposure control, image processing and reconstruction programs, patient and equipment supports, component...

21 CFR 892.1715 - Full-field digital mammography system.

Code of Federal Regulations, 2011 CFR

2011-04-01

... planar digital x-ray images of the entire breast. This generic type of device may include digital mammography acquisition software, full-field digital image receptor, acquisition workstation, automatic exposure control, image processing and reconstruction programs, patient and equipment supports, component...

Population-based mammography screening: comparison of screen-film and full-field digital mammography with soft-copy reading--Oslo I study.

PubMed

Skaane, Per; Young, Kari; Skjennald, Arnulf

2003-12-01

To compare screen-film and full-field digital mammography with soft-copy reading in a population-based screening program. Full-field digital and screen-film mammography were performed in 3,683 women aged 50-69 years. Two standard views of each breast were acquired with each modality. Images underwent independent double reading with use of a five-point rating scale for probability of cancer. Recall rates and positive predictive values were calculated. Cancer detection rates determined with both modalities were compared by using the McNemar test for paired proportions. Retrospective side-by-side analysis for conspicuity of cancers was performed by an external independent radiologist group with experience in both modalities. In 3,683 cases, 31 cancers were detected. Screen-film mammography depicted 28 (0.76%) malignancies, and full-field digital mammography depicted 23 (0.62%) malignancies. The difference between cancer detection rates was not significant (P =.23). The recall rate for full-field digital mammography (4.6%; 168 of 3,683 cases) was slightly higher than that for screen-film mammography (3.5%; 128 of 3,683 cases). The positive predictive value based on needle biopsy results was 46% for screen-film mammography and 39% for full-field digital mammography. Side-by-side image comparison for cancer conspicuity led to classification of 19 cancers as equal for probability of malignancy, six cancers as slightly better demonstrated at screen-film mammography, and six cancers as slightly better demonstrated at full-field digital mammography. There was no statistically significant difference in cancer detection rate between screen-film and full-field digital mammography. Cancer conspicuity was equal with both modalities. Full-field digital mammography with soft-copy reading is comparable to screen-film mammography in population-based screening.

An Implantable Neural Sensing Microsystem with Fiber-Optic Data Transmission and Power Delivery

PubMed Central

Park, Sunmee; Borton, David A.; Kang, Mingyu; Nurmikko, Arto V.; Song, Yoon-Kyu

2013-01-01

We have developed a prototype cortical neural sensing microsystem for brain implantable neuroengineering applications. Its key feature is that both the transmission of broadband, multichannel neural data and power required for the embedded microelectronics are provided by optical fiber access. The fiber-optic system is aimed at enabling neural recording from rodents and primates by converting cortical signals to a digital stream of infrared light pulses. In the full microsystem whose performance is summarized in this paper, an analog-to-digital converter and a low power digital controller IC have been integrated with a low threshold, semiconductor laser to extract the digitized neural signals optically from the implantable unit. The microsystem also acquires electrical power and synchronization clocks via optical fibers from an external laser by using a highly efficient photovoltaic cell on board. The implantable unit employs a flexible polymer substrate to integrate analog and digital microelectronics and on-chip optoelectronic components, while adapting to the anatomical and physiological constraints of the environment. A low power analog CMOS chip, which includes preamplifier and multiplexing circuitry, is directly flip-chip bonded to the microelectrode array to form the cortical neurosensor device. PMID:23666130

Coupling Damage-Sensing Particles to the Digitial Twin Concept

NASA Technical Reports Server (NTRS)

Hochhalter, Jacob; Leser, William P.; Newman, John A.; Gupta, Vipul K.; Yamakov, Vesselin; Cornell, Stephen R.; Willard, Scott A.; Heber, Gerd

2014-01-01

The research presented herein is a first step toward integrating two emerging structural health management paradigms: digital twin and sensory materials. Digital twin is an emerging life management and certification paradigm whereby models and simulations consist of as-built vehicle state, as-experienced loads and environments, and other vehicle-specific history to enable high-fidelity modeling of individual aerospace vehicles throughout their service lives. The digital twin concept spans many disciplines, and an extensive study on the full domain is out of the scope of this study. Therefore, as it pertains to the digital twin, this research focused on one major concept: modeling specifically the as-manufactured geometry of a component and its microstructure (to the degree possible). The second aspect of this research was to develop the concept of sensory materials such that they can be employed within the digital twin framework. Sensory materials are shape-memory alloys that undergo an audible phase transformation while experiencing sufficient strain. Upon embedding sensory materials with a structural alloy, this audible transformation helps improve the reliability of crack detection especially at the early stages of crack growth. By combining these two early-stage technologies, an automated approach to evidence-based inspection and maintenance of aerospace vehicles is sought.

Advanced power system protection and incipient fault detection and protection of spaceborne power systems

NASA Technical Reports Server (NTRS)

Russell, B. Don

1989-01-01

This research concentrated on the application of advanced signal processing, expert system, and digital technologies for the detection and control of low grade, incipient faults on spaceborne power systems. The researchers have considerable experience in the application of advanced digital technologies and the protection of terrestrial power systems. This experience was used in the current contracts to develop new approaches for protecting the electrical distribution system in spaceborne applications. The project was divided into three distinct areas: (1) investigate the applicability of fault detection algorithms developed for terrestrial power systems to the detection of faults in spaceborne systems; (2) investigate the digital hardware and architectures required to monitor and control spaceborne power systems with full capability to implement new detection and diagnostic algorithms; and (3) develop a real-time expert operating system for implementing diagnostic and protection algorithms. Significant progress has been made in each of the above areas. Several terrestrial fault detection algorithms were modified to better adapt to spaceborne power system environments. Several digital architectures were developed and evaluated in light of the fault detection algorithms.

Multi-feature machine learning model for automatic segmentation of green fractional vegetation cover for high-throughput field phenotyping.

PubMed

Sadeghi-Tehran, Pouria; Virlet, Nicolas; Sabermanesh, Kasra; Hawkesford, Malcolm J

2017-01-01

Accurately segmenting vegetation from the background within digital images is both a fundamental and a challenging task in phenotyping. The performance of traditional methods is satisfactory in homogeneous environments, however, performance decreases when applied to images acquired in dynamic field environments. In this paper, a multi-feature learning method is proposed to quantify vegetation growth in outdoor field conditions. The introduced technique is compared with the state-of the-art and other learning methods on digital images. All methods are compared and evaluated with different environmental conditions and the following criteria: (1) comparison with ground-truth images, (2) variation along a day with changes in ambient illumination, (3) comparison with manual measurements and (4) an estimation of performance along the full life cycle of a wheat canopy. The method described is capable of coping with the environmental challenges faced in field conditions, with high levels of adaptiveness and without the need for adjusting a threshold for each digital image. The proposed method is also an ideal candidate to process a time series of phenotypic information throughout the crop growth acquired in the field. Moreover, the introduced method has an advantage that it is not limited to growth measurements only but can be applied on other applications such as identifying weeds, diseases, stress, etc.

Use of Digital Resources in an Academic Environment: A Qualitative Study of Students' Perceptions, Experiences, and Digital Literacy Skills

ERIC Educational Resources Information Center

Matusiak, Krystyna K.

2010-01-01

The use of information resources for teaching and learning in an academic environment is undergoing a dramatic transformation. The development of digital technologies and the growth of the Internet have changed the format as well as the dissemination methods of scholarly resources. Digital libraries have been created as part of the transition from…

Apple Fruit Diameter and Length Estimation by Using the Thermal and Sunshine Hours Approach and Its Application to the Digital Orchard Management Information System

PubMed Central

Zhang, Yong; Fu, Chunxia; Xing, Bin; Li, Wenyong; Qian, Jianping; Li, Sha; Wang, Hui; Fan, Xiaodan; Yan, Yujing; Wang, Yan’an; Yang, Xinting

2015-01-01

In apple cultivation, simulation models may be used to monitor fruit size during the growth and development process to predict production levels and to optimize fruit quality. Here, Fuji apples cultivated in spindle-type systems were used as the model crop. Apple size was measured during the growing period at an interval of about 20 days after full bloom, with three weather stations being used to collect orchard temperature and solar radiation data at different sites. Furthermore, a 2-year dataset (2011 and 2012) of apple fruit size measurements were integrated according to the weather station deployment sites, in addition to the top two most important environment factors, thermal and sunshine hours, into the model. The apple fruit diameter and length were simulated using physiological development time (PDT), an indicator that combines important environment factors, such as temperature and photoperiod, as the driving variable. Compared to the model of calendar-based development time (CDT), an indicator counting the days that elapse after full bloom, we confirmed that the PDT model improved the estimation accuracy to within 0.2 cm for fruit diameter and 0.1 cm for fruit length in independent years using a similar data collection method in 2013. The PDT model was implemented to realize a web-based management information system for a digital orchard, and the digital system had been applied in Shandong Province, China since 2013. This system may be used to compute the dynamic curve of apple fruit size based on data obtained from a nearby weather station. This system may provide an important decision support for farmers using the website and short message service to optimize crop production and, hence, economic benefit. PMID:25831065

Apple fruit diameter and length estimation by using the thermal and sunshine hours approach and its application to the digital orchard management information system.

PubMed

Li, Ming; Chen, Meixiang; Zhang, Yong; Fu, Chunxia; Xing, Bin; Li, Wenyong; Qian, Jianping; Li, Sha; Wang, Hui; Fan, Xiaodan; Yan, Yujing; Wang, Yan'an; Yang, Xinting

2015-01-01

In apple cultivation, simulation models may be used to monitor fruit size during the growth and development process to predict production levels and to optimize fruit quality. Here, Fuji apples cultivated in spindle-type systems were used as the model crop. Apple size was measured during the growing period at an interval of about 20 days after full bloom, with three weather stations being used to collect orchard temperature and solar radiation data at different sites. Furthermore, a 2-year dataset (2011 and 2012) of apple fruit size measurements were integrated according to the weather station deployment sites, in addition to the top two most important environment factors, thermal and sunshine hours, into the model. The apple fruit diameter and length were simulated using physiological development time (PDT), an indicator that combines important environment factors, such as temperature and photoperiod, as the driving variable. Compared to the model of calendar-based development time (CDT), an indicator counting the days that elapse after full bloom, we confirmed that the PDT model improved the estimation accuracy to within 0.2 cm for fruit diameter and 0.1 cm for fruit length in independent years using a similar data collection method in 2013. The PDT model was implemented to realize a web-based management information system for a digital orchard, and the digital system had been applied in Shandong Province, China since 2013. This system may be used to compute the dynamic curve of apple fruit size based on data obtained from a nearby weather station. This system may provide an important decision support for farmers using the website and short message service to optimize crop production and, hence, economic benefit.

Designing Digital Environments for Art Education/Exploration.

ERIC Educational Resources Information Center

Milekic, Slavko

2000-01-01

Examines the role of digital technology in the context of art education and art exploration. Discusses the development of digital environments as the next step in the evolution of traditional computers, whose main characteristic is support for simultaneous multiple-user interactions and for social and collaborative activities. (LRW)

Reimagining the microscope in the 21(st) century using the scalable adaptive graphics environment.

PubMed

Mateevitsi, Victor; Patel, Tushar; Leigh, Jason; Levy, Bruce

2015-01-01

Whole-slide imaging (WSI), while technologically mature, remains in the early adopter phase of the technology adoption lifecycle. One reason for this current situation is that current methods of visualizing and using WSI closely follow long-existing workflows for glass slides. We set out to "reimagine" the digital microscope in the era of cloud computing by combining WSI with the rich collaborative environment of the Scalable Adaptive Graphics Environment (SAGE). SAGE is a cross-platform, open-source visualization and collaboration tool that enables users to access, display and share a variety of data-intensive information, in a variety of resolutions and formats, from multiple sources, on display walls of arbitrary size. A prototype of a WSI viewer app in the SAGE environment was created. While not full featured, it enabled the testing of our hypothesis that these technologies could be blended together to change the essential nature of how microscopic images are utilized for patient care, medical education, and research. Using the newly created WSI viewer app, demonstration scenarios were created in the patient care and medical education scenarios. This included a live demonstration of a pathology consultation at the International Academy of Digital Pathology meeting in Boston in November 2014. SAGE is well suited to display, manipulate and collaborate using WSIs, along with other images and data, for a variety of purposes. It goes beyond how glass slides and current WSI viewers are being used today, changing the nature of digital pathology in the process. A fully developed WSI viewer app within SAGE has the potential to encourage the wider adoption of WSI throughout pathology.

Reimagining the microscope in the 21st century using the scalable adaptive graphics environment

PubMed Central

Mateevitsi, Victor; Patel, Tushar; Leigh, Jason; Levy, Bruce

2015-01-01

Background: Whole-slide imaging (WSI), while technologically mature, remains in the early adopter phase of the technology adoption lifecycle. One reason for this current situation is that current methods of visualizing and using WSI closely follow long-existing workflows for glass slides. We set out to “reimagine” the digital microscope in the era of cloud computing by combining WSI with the rich collaborative environment of the Scalable Adaptive Graphics Environment (SAGE). SAGE is a cross-platform, open-source visualization and collaboration tool that enables users to access, display and share a variety of data-intensive information, in a variety of resolutions and formats, from multiple sources, on display walls of arbitrary size. Methods: A prototype of a WSI viewer app in the SAGE environment was created. While not full featured, it enabled the testing of our hypothesis that these technologies could be blended together to change the essential nature of how microscopic images are utilized for patient care, medical education, and research. Results: Using the newly created WSI viewer app, demonstration scenarios were created in the patient care and medical education scenarios. This included a live demonstration of a pathology consultation at the International Academy of Digital Pathology meeting in Boston in November 2014. Conclusions: SAGE is well suited to display, manipulate and collaborate using WSIs, along with other images and data, for a variety of purposes. It goes beyond how glass slides and current WSI viewers are being used today, changing the nature of digital pathology in the process. A fully developed WSI viewer app within SAGE has the potential to encourage the wider adoption of WSI throughout pathology. PMID:26110092

Space Archaeology: Attribute, Object, Task and Method

NASA Astrophysics Data System (ADS)

Wang, Xinyuan; Guo, Huadong; Luo, Lei; Liu, Chuansheng

2017-04-01

Archaeology takes the material remains of human activity as the research object, and uses those fragmentary remains to reconstruct the humanistic and natural environment in different historical periods. Space Archaeology is a new branch of the Archaeology. Its study object is the humanistic-natural complex including the remains of human activities and living environments on the earth surface. The research method, space information technologies applied to this complex, is an innovative process concerning archaeological information acquisition, interpretation and reconstruction, and to achieve the 3-D dynamic reconstruction of cultural heritages by constructing the digital cultural-heritage sphere. Space archaeology's attribute is highly interdisciplinary linking several areas of natural and social and humanities. Its task is to reveal the history, characteristics, and patterns of human activities in the past, as well as to understand the evolutionary processes guiding the relationship between human and their environment. This paper summarizes six important aspects of space archaeology and five crucial recommendations for the establishment and development of this new discipline. The six important aspects are: (1) technologies and methods for non-destructive detection of archaeological sites; (2) space technologies for the protection and monitoring of cultural heritages; (3) digital environmental reconstruction of archaeological sites; (4) spatial data storage and data mining of cultural heritages; (5) virtual archaeology, digital reproduction and public information and presentation system; and (6) the construction of scientific platform of digital cultural-heritage sphere. The five key recommendations for establishing the discipline of Space Archaeology are: (1) encouraging the full integration of the strengths of both archaeology and museology with space technology to promote the development of space technologies' application for cultural heritages; (2) a new disciplinary framework for guiding current researches on space technologies for cultural heritages required; (3) the large cultural heritages desperately need to carrying out the key problems research of the theory-technology-application integration to obtain essential and overall scientific understanding of heritages; (4) focusing planning and implementation of major scientific programs on earth observation for cultural heritage, including those relevant to the development of theory and methods, technology combination and applicability, impact assessments and virtual reconstruction; and (5) taking full advantage of cultural heritages and earth observation sciences to strengthen space archaeology for improvements and refinements in both disciplinary practices and theoretical development. Several case studies along the ancient Silk Road were given to demonstrate the potential benefits of space archaeology.

Accuracy of Intraoral Digital Impressions for Whole Upper Jaws, Including Full Dentitions and Palatal Soft Tissues.

PubMed

Gan, Ning; Xiong, Yaoyang; Jiao, Ting

2016-01-01

Intraoral digital impressions have been stated to meet the clinical requirements for some teeth-supported restorations, though fewer evidences were proposed for larger scanning range. The aim of this study was to compare the accuracy (trueness and precision) of intraoral digital impressions for whole upper jaws, including the full dentitions and palatal soft tissues, as well as to determine the effect of different palatal vault height or arch width on accuracy of intraoral digital impressions. Thirty-two volunteers were divided into three groups according to the palatal vault height or arch width. Each volunteer received three scans with TRIOS intraoral scanner and one conventional impression of whole upper jaw. Three-dimensional (3D) images digitized from conventional gypsum casts by a laboratory scanner were chose as the reference models. All datasets were imported to a specific software program for 3D analysis by "best fit alignment" and "3D compare" process. Color-coded deviation maps showed qualitative visualization of the deviations. For the digital impressions for palatal soft tissues, trueness was (130.54±33.95)μm and precision was (55.26±11.21)μm. For the digital impressions for upper full dentitions, trueness was (80.01±17.78)μm and precision was (59.52±11.29)μm. Larger deviations were found between intraoral digital impressions and conventional impressions in the areas of palatal soft tissues than that in the areas of full dentitions (p<0.001). Precision of digital impressions for palatal soft tissues was slightly better than that for full dentitions (p = 0.049). There was no significant effect of palatal vault height on accuracy of digital impressions for palatal soft tissues (p>0.05), but arch width was found to have a significant effect on precision of intraoral digital impressions for full dentitions (p = 0.016). A linear correlation was found between arch width and precision of digital impressions for whole upper jaws (r = 0.326, p = 0.034 for palatal soft tissues and r = 0.485, p = 0.002 for full dentitions). It was feasible to use the intraoral scanner to obtain digital impressions for whole upper jaws. Wider dental arch contributed to lower precision of an intraoral digital impression. It should be confirmed in further studies that whether accuracy of digital impressions for whole upper jaws is clinically acceptable.

Using Modern Design Tools for Digital Avionics Development

NASA Technical Reports Server (NTRS)

Hyde, David W.; Lakin, David R., II; Asquith, Thomas E.

2000-01-01

Using Modem Design Tools for Digital Avionics Development Shrinking development time and increased complexity of new avionics forces the designer to use modem tools and methods during hardware development. Engineers at the Marshall Space Flight Center have successfully upgraded their design flow and used it to develop a Mongoose V based radiation tolerant processor board for the International Space Station's Water Recovery System. The design flow, based on hardware description languages, simulation, synthesis, hardware models, and full functional software model libraries, allowed designers to fully simulate the processor board from reset, through initialization before any boards were built. The fidelity of a digital simulation is limited to the accuracy of the models used and how realistically the designer drives the circuit's inputs during simulation. By using the actual silicon during simulation, device modeling errors are reduced. Numerous design flaws were discovered early in the design phase when they could be easily fixed. The use of hardware models and actual MIPS software loaded into full functional memory models also provided checkout of the software development environment. This paper will describe the design flow used to develop the processor board and give examples of errors that were found using the tools. An overview of the processor board firmware will also be covered.

Modeling Student Cognition in Digital and Nondigital Assessment Environments

ERIC Educational Resources Information Center

DiCerbo, Kristen E.; Xu, Yuning; Levy, Roy; Lai, Emily; Holland, Laura

2017-01-01

Inferences about student knowledge, skills, and attributes based on digital activity still largely come from whether students ultimately get a correct result or not. However, the ability to collect activity stream data as individuals interact with digital environments provides information about students' processes as they progress through learning…

Measurement of Full Field Strains in Filament Wound Composite Tubes Under Axial Compressive Loading by the Digital Image Correlation (DIC) Technique

DTIC Science & Technology

2013-05-01

Measurement of Full Field Strains in Filament Wound Composite Tubes Under Axial Compressive Loading by the Digital Image Correlation (DIC...of Full Field Strains in Filament Wound Composite Tubes Under Axial Compressive Loading by the Digital Image Correlation (DIC) Technique Todd C...Wound Composite Tubes Under Axial Compressive Loading by the Digital Image Correlation (DIC) Technique 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c

Impact of PACS in hospital management

NASA Astrophysics Data System (ADS)

Hur, Gham; Cha, Soon-Joo; Kim, Yong H.; Hwang, Yoon J.; Kim, Soo Y.

2002-05-01

Since the low-cost, NT-based, full PACS was successfully implemented in a large-scale hospital at the end of 1999, many hospital administrators have rushed to purchase the system competitively. It is now a worldwide trend to implement the technology, but Korea has several unique environments for the fast spread of the full PACS. Since hospitals in Korea operate inpatient and outpatient clinics in the same building and use identical OCS, full integration of PACS with the OCS was relatively easy and highly efficient. The simple governing structures of the hospitals also made the decision-making process short and effective. In addition, the national health insurance reimbursement policy that started pay in the beginning of 2000 has also played a catalytic role for the swift propagation of PACS. The recent appearance of the affordable PACS gave hospital administrators the opportunity to learn and understand the role of digital imaging in the areas that are directly related to the efficiency and quality of medical services, as well as cost containment. Furthermore, PACS provided them with windows to the 'all-digital hospital,' which will lead them to realign policies in the management of the hospitals in order to compete successfully in the fast-changing world of health care.

Crash response data system for the controlled impact demonstration (CID) of a full scale transport aircraft

NASA Astrophysics Data System (ADS)

Calloway, Raymond S.; Knight, Vernie H., Jr.

NASA Langley's Crash Response Data System (CRDS) which is designed to acquire aircraft structural and anthropomorphic dummy responses during the full-scale transport CID test is described. Included in the discussion are the system design approach, details on key instrumentation subsystems and operations, overall instrumentation crash performance, and data recovery results. Two autonomous high-environment digital flight instrumentation systems, DAS 1 and DAS 2, were employed to obtain research data from various strain gage, accelerometer, and tensiometric sensors installed in the B-720 test aircraft. The CRDS successfully acquired 343 out of 352 measurements of dynamic crash data.

Development of Digital Instruction for Environment for Global Warming Alleviation

ERIC Educational Resources Information Center

Praneetham, Chuleewan; Thathong, Kongsak

2016-01-01

Technological education and instruction are widely used in the present education trend. Using of digital instruction for environmental subject can encourage students in learning and raise their awareness and attitude on environmental issues. The purposes of this research were: 1) to construct and develop the digital instruction for environment for…

Identifying Different Registers of Digital Literacy in Virtual Learning Environments

ERIC Educational Resources Information Center

Knutsson, Ola; Blasjo, Mona.; Hallsten, Stina; Karlstrom, Petter

2012-01-01

In this paper social semiotics, and systemic functional linguistics in particular, are used in order to identify registers of digital literacy in the use of virtual learning environments. The framework of social semiotics provides means to systemize and discuss digital literacy as a linguistic and semiotic issue. The following research question…

Learner-Controlled Scaffolding Linked to Open-Ended Problems in a Digital Learning Environment

ERIC Educational Resources Information Center

Edson, Alden Jack

2017-01-01

This exploratory study reports on how students activated learner-controlled scaffolding and navigated through sequences of connected problems in a digital learning environment. A design experiment was completed to (re)design, iteratively develop, test, and evaluate a digital version of an instructional unit focusing on binomial distributions and…

Laser Based Color Film Recorder System With GaAs Microlaser

NASA Astrophysics Data System (ADS)

Difrancesco, David J.

1989-07-01

In 1984 Pixar's research and development group built and applied to the motion-picture arts at Lucasfilm's ILM facility a three color laser based film scanner/recorder system. The digital film printer is capable of reading and writing 35mm film formats on a variety of film stocks. The system has been used in award-winning special-effects work, and has been operated in a normal production environment since that time. The primary objective was to develop a full color high resolution system, free from scan artifacts, enabling traditionally photographed motion-picture film to be inter-cut with digital raster image photography. Its use is applied to the art of blue-screen traveling-matte cinematography for motion pic-ture special effects. The system was designed using the Pixar Image Computer and conventional gas laser technology as the illumination source. This paper will discuss recent experimental work in the application of GaAs microlaser technology to a digital film printing system of the future.

Metacognitive components in smart learning environment

NASA Astrophysics Data System (ADS)

Sumadyo, M.; Santoso, H. B.; Sensuse, D. I.

2018-03-01

Metacognitive ability in digital-based learning process helps students in achieving learning goals. So that digital-based learning environment should make the metacognitive component as a facility that must be equipped. Smart Learning Environment is the concept of a learning environment that certainly has more advanced components than just a digital learning environment. This study examines the metacognitive component of the smart learning environment to support the learning process. A review of the metacognitive literature was conducted to examine the components involved in metacognitive learning strategies. Review is also conducted on the results of study smart learning environment, ranging from design to context in building smart learning. Metacognitive learning strategies certainly require the support of adaptable, responsive and personalize learning environments in accordance with the principles of smart learning. The current study proposed the role of metacognitive component in smart learning environment, which is useful as the basis of research in building environment in smart learning.

From Geocentrism to Allocentrism: Teaching the Phases of the Moon in a Digital Full-Dome Planetarium

NASA Astrophysics Data System (ADS)

Chastenay, Pierre

2016-02-01

An increasing number of planetariums worldwide are turning digital, using ultra-fast computers, powerful graphic cards, and high-resolution video projectors to create highly realistic astronomical imagery in real time. This modern technology makes it so that the audience can observe astronomical phenomena from a geocentric as well as an allocentric perspective (the view from space). While the dome creates a sense of immersion, the digital planetarium introduces a new way to teach astronomy, especially for topics that are inherently three-dimensional and where seeing the phenomenon from different points of view is essential. Like a virtual-reality environment, an immersive digital planetarium helps learners create a more scientifically accurate visualization of astronomical phenomena. In this study, a digital planetarium was used to teach the phases of the Moon to children aged 12 to 14. To fully grasp the lunar phases, one must imagine the spherical Moon (as perceived from space), revolving around the Earth while being illuminated by the Sun, and then reconcile this view with the geocentric perspective. Digital planetariums allow learners to have both an allocentric and a geocentric perspective on the lunar phases. Using a Design experiment approach, we tested an educational scenario in which the lunar phases were taught in an allocentric digital planetarium. Based on qualitative data collected before, during, and after the planetarium intervention, we were able to demonstrate that five out of six participants had a better understanding of the lunar phases after the planetarium session.

Comparison of flight results with digital simulation for a digital electronic engine control in an F-15 airplane

NASA Technical Reports Server (NTRS)

Myers, L. P.; Burcham, F. W., Jr.

1983-01-01

Substantial benefits of a full authority digital electronic engine control on an air breathing engine were demonstrated repeatedly in simulation studies, ground engine tests, and engine altitude test facilities. A digital engine electronic control system showed improvements in efficiency, performance, and operation. An additional benefit of full authority digital controls is the capability of detecting and correcting failures and providing engine health diagnostics.

Design of digital load torque observer in hybrid electric vehicle

NASA Astrophysics Data System (ADS)

Sun, Yukun; Zhang, Haoming; Wang, Yinghai

2008-12-01

In hybrid electric vehicle, engine begain to work only when motor was in high speed in order to decrease tail gas emission. However, permanent magnet motor was sensitive to its load, adding engine to the system always made its speed drop sharply, which caused engine to work in low efficiency again and produced much more environment pollution. Dynamic load torque model of permanent magnet synchronous motor is established on the basic of motor mechanical equation and permanent magnet synchronous motor vector control theory, Full- digital load torque observer and compensation control system is made based on TMS320F2407A. Experiment results prove load torque observer and compensation control system can detect and compensate torque disturbing effectively, which can solve load torque disturbing and decrease gas pollution of hybrid electric vehicle.

An automated and universal method for measuring mean grain size from a digital image of sediment

USGS Publications Warehouse

Buscombe, Daniel D.; Rubin, David M.; Warrick, Jonathan A.

2010-01-01

Existing methods for estimating mean grain size of sediment in an image require either complicated sequences of image processing (filtering, edge detection, segmentation, etc.) or statistical procedures involving calibration. We present a new approach which uses Fourier methods to calculate grain size directly from the image without requiring calibration. Based on analysis of over 450 images, we found the accuracy to be within approximately 16% across the full range from silt to pebbles. Accuracy is comparable to, or better than, existing digital methods. The new method, in conjunction with recent advances in technology for taking appropriate images of sediment in a range of natural environments, promises to revolutionize the logistics and speed at which grain-size data may be obtained from the field.

Accuracy of Intraoral Digital Impressions for Whole Upper Jaws, Including Full Dentitions and Palatal Soft Tissues

PubMed Central

Gan, Ning; Xiong, Yaoyang; Jiao, Ting

2016-01-01

Intraoral digital impressions have been stated to meet the clinical requirements for some teeth-supported restorations, though fewer evidences were proposed for larger scanning range. The aim of this study was to compare the accuracy (trueness and precision) of intraoral digital impressions for whole upper jaws, including the full dentitions and palatal soft tissues, as well as to determine the effect of different palatal vault height or arch width on accuracy of intraoral digital impressions. Thirty-two volunteers were divided into three groups according to the palatal vault height or arch width. Each volunteer received three scans with TRIOS intraoral scanner and one conventional impression of whole upper jaw. Three-dimensional (3D) images digitized from conventional gypsum casts by a laboratory scanner were chose as the reference models. All datasets were imported to a specific software program for 3D analysis by "best fit alignment" and "3D compare" process. Color-coded deviation maps showed qualitative visualization of the deviations. For the digital impressions for palatal soft tissues, trueness was (130.54±33.95)μm and precision was (55.26±11.21)μm. For the digital impressions for upper full dentitions, trueness was (80.01±17.78)μm and precision was (59.52±11.29)μm. Larger deviations were found between intraoral digital impressions and conventional impressions in the areas of palatal soft tissues than that in the areas of full dentitions (p<0.001). Precision of digital impressions for palatal soft tissues was slightly better than that for full dentitions (p = 0.049). There was no significant effect of palatal vault height on accuracy of digital impressions for palatal soft tissues (p>0.05), but arch width was found to have a significant effect on precision of intraoral digital impressions for full dentitions (p = 0.016). A linear correlation was found between arch width and precision of digital impressions for whole upper jaws (r = 0.326, p = 0.034 for palatal soft tissues and r = 0.485, p = 0.002 for full dentitions). It was feasible to use the intraoral scanner to obtain digital impressions for whole upper jaws. Wider dental arch contributed to lower precision of an intraoral digital impression. It should be confirmed in further studies that whether accuracy of digital impressions for whole upper jaws is clinically acceptable. PMID:27383409

Digital Immersive Virtual Environments and Instructional Computing

ERIC Educational Resources Information Center

Blascovich, Jim; Beall, Andrew C.

2010-01-01

This article reviews theory and research relevant to the development of digital immersive virtual environment-based instructional computing systems. The review is organized within the context of a multidimensional model of social influence and interaction within virtual environments that models the interaction of four theoretical factors: theory…

Young Children and Screen Time: Creating a Mindful Approach to Digital Technology

ERIC Educational Resources Information Center

Neumann, Michelle Margaret

2015-01-01

To effectively address early childhood screen time concerns raised by parents and policy makers it is important to examine the current home digital environments of young children. The present study draws upon research that examined the home digital environment of Australian parents and their children (aged 2 to 4; N = 69). Parents completed a…

Digital radiography can reduce scoliosis x-ray exposure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kling, T.F. Jr.; Cohen, M.J.; Lindseth, R.E.

1990-09-01

Digital radiology is a new computerized system of acquiring x-rays in a digital (electronic) format. It possesses a greatly expanded dose response curve that allows a very broad range of x-ray dose to produce a diagnostic image. Potential advantages include significantly reduced radiation exposure without loss of image quality, acquisition of images of constant density irrespective of under or over exposure, and reduced repeat rates for unsatisfactory films. The authors prospectively studied 30 adolescents with scoliosis who had both conventional (full dose) and digital (full, one-half, or one-third dose) x-rays. They found digital made AP and lateral image with allmore » anatomic areas clearly depicted at full and one-half dose. Digital laterals were better at full dose and equal to conventional at one-half dose. Cobb angles were easily measured on all one-third dose AP and on 8 of 10 one-third dose digital laterals. Digital clearly depicted the Risser sign at one-half and one-third dose and the repeat rate was nil in this study, indicating digital compensates well for exposure errors. The study indicates that digital does allow radiation dose to be reduced by at least one-half in scoliosis patients and that it does have improved image quality with good contrast over a wide range of x-ray exposure.« less

Stability of Fiber Optic Networked Decentralized Distributed Engine Control Under Time Delays

DTIC Science & Technology

2009-08-01

Nomenclature FADEC = Full Authority Digital Engine Control D2FADEC = Decentralized Distributed Full Authority Digital Engine Control DEC...Corporation (IFOS), bm@ifos.com. I American Institute of Aeronautics and Astronautics 2 II. Distributed Engine Control Systems FADEC Based on...of Full Authority Digital Engine Control ( FADEC ) are distributed at the component level. Each sensor/actuator is to be replaced by a smart sensor

Dietary Digital Diaries: Documenting Adolescents' Obesogenic Environment

ERIC Educational Resources Information Center

Staiano, Amanda E.; Baker, Christina M.; Calvert, Sandra L.

2012-01-01

Obesogenic environments promote excessive caloric and fat intake. A total of 23 low-income, African American adolescents digitally photographed their lunchtime food environment at a school buffet during summer camp. Depicted food was coded for nutritional content on the platescape (own plate or others' plates) and the tablescape (open buffet).…

Digital Communication Applications in the Online Learning Environment

ERIC Educational Resources Information Center

Lambeth, Krista Jill

2011-01-01

Scope and method of study. The purpose of this study was for the researcher to obtain a better understanding of the online learning environment, to explore the various ways online class instructors have incorporated digital communication applications to try and provide learner-centered online learning environments, and to examine students'…

Wireless sensor platform for harsh environments

NASA Technical Reports Server (NTRS)

Garverick, Steven L. (Inventor); Yu, Xinyu (Inventor); Toygur, Lemi (Inventor); He, Yunli (Inventor)

2009-01-01

Reliable and efficient sensing becomes increasingly difficult in harsher environments. A sensing module for high-temperature conditions utilizes a digital, rather than analog, implementation on a wireless platform to achieve good quality data transmission. The module comprises a sensor, integrated circuit, and antenna. The integrated circuit includes an amplifier, A/D converter, decimation filter, and digital transmitter. To operate, an analog signal is received by the sensor, amplified by the amplifier, converted into a digital signal by the A/D converter, filtered by the decimation filter to address the quantization error, and output in digital format by the digital transmitter and antenna.

Extending the role of a healthcare digital library environment to support orthopaedic research.

PubMed

Miles-Board, Timothy; Carr, Leslie; Wills, Gary; Power, Guillermo; Bailey, Christopher; Hall, Wendy; Stenning, Matthew; Grange, Simon

2006-06-01

A digital archive, together with its users and its contents, does not exist in isolation; there is a cycle of activities which provides the context for the archive's existence. In arguing for the broadening of the traditional view of digital libraries as merely collections towards the processes of collecting and deploying, we have developed an extend ed digital library environment for orthopaedic surgeons which bridges the gap between the undertaking of experimental work and the dissemination of its results through electronic publication.

Medical devices; radiology devices; reclassification of full-field digital mammography system. Final rule.

PubMed

2010-11-05

The Food and Drug Administration (FDA) is announcing the reclassification of the full-field digital mammography (FFDM) system from class III (premarket approval) to class II (special controls). The device type is intended to produce planar digital x-ray images of the entire breast; this generic type of device may include digital mammography acquisition software, full-field digital image receptor, acquisition workstation, automatic exposure control, image processing and reconstruction programs, patient and equipment supports, component parts, and accessories. The special control that will apply to the device is the guidance document entitled "Class II Special Controls Guidance Document: Full-Field Digital Mammography System." FDA is reclassifying the device into class II (special controls) because general controls along with special controls will provide a reasonable assurance of safety and effectiveness of the device. Elsewhere in this issue of the Federal Register, FDA is announcing the availability of the guidance document that will serve as the special control for this device.

Interference mitigation for simultaneous transmit and receive applications on digital phased array systems

NASA Astrophysics Data System (ADS)

Snow, Trevor M.

As analog-to-digital (ADC) and digital-to-analog conversion (DAC) technologies become cheaper and digital processing capabilities improve, phased array systems with digital transceivers at every element will become more commonplace. These architectures offer greater capability over traditional analog systems and enable advanced applications such as multiple-input, multiple-output (MIMO) communications, adaptive beamforming, space-time adaptive processing (STAP), and MIMO for radar. Capabilities for such systems are still limited by the need for isolating self-interference from transmitters at co-located receivers. The typical approach of time-sharing the antenna aperture between transmitters and receivers works but leaves the receivers blind for a period of time. For full-duplex operation, some systems use separate frequency bands for transmission and reception, but these require fixed filtering which reduces the system's ability to adapt to its environment and is also an inefficient use of spectral resources. To that end, tunable, high quality-factor filters are used for sub-band isolation and protect receivers while allowing open reception at other frequencies. For more flexibility, another emergent area of related research has focused on co-located spatial isolation using multiple antennas and direct injection of interference cancellation signals into receivers, which enables same-frequency full-duplex operation. With all these methods, self-interference must be reduced by an amount that prevents saturation of the ADC. Intermodulation products generated in the receiver in this process can potentially be problematic, as certain intermodulation products may appear to come from a particular angle and cohere in the beamformer. This work explores various digital phased array architectures and the how the flexibility afforded by an all-digital beamforming architecture, layered with other methods of isolation, can be used to reduce self-interference within the system. Specifically, digital control of coupled energy into receiving elements for planar and cylindrical array symmetries can be significantly reduced using near-field nulling, optimization of transmission frequencies for particular steering angles, and optimization of phase weights over restricted sets, without major impacts to the far-field performance of the system. Finally, a method for reducing in-band intermodulation that would ordinarily cohere in a system's receive beamformer is demonstrated using parallel cross-linearization of adjacent digital receivers in a phased array.

Effects of Character Voice-Over on Players' Engagement in a Digital Role-Playing Game Environment

ERIC Educational Resources Information Center

Byun, JaeHwan

2012-01-01

Learner engagement has been considered one of the keys that can lead learners to successful learning in a multimedia learning environment such as digital game-based learning. Regarding this point, game-based learning advocates (e.g., Gee, 2003; Prensky, 2001) have asserted that digital games have great potential to engage learners. Nonetheless,…

Doing What We Teach: Promoting Digital Literacies for Professional Development through Personal Learning Environments and Participation

ERIC Educational Resources Information Center

Laakkonen, Ilona

2015-01-01

Despite the proliferation of social media, few learners make effective use of digital technology to support their learning or graduate with the skills necessary for developing and communicating their expertise in the knowledge-driven networked society of the digital age. This article makes use of the concept of Personal Learning Environments (PLE)…

78 FR 61337 - Request for Comments on Department of Commerce Green Paper, Copyright Policy, Creativity, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-03

... relevance and scope of the first sale doctrine in the digital environment; the appropriate calibration of... licensing environment; and establishing a multistakeholder dialogue on improving the operation of the notice... in adapting copyright law to the digital environment, identifies issues on which more work should be...

Digital Library and Digital Reference Service: Integration and Mutual Complementarity

ERIC Educational Resources Information Center

Liu, Jia

2008-01-01

Both the digital library and the digital reference service were invented and have been developed under the networked environment. Among their intersections, the fundamental thing is their symbiotic interest--serving the user in a more efficient way. The article starts by discussing the digital library and its service and the digital reference…

Digital mammography: more microcalcifications, more columnar cell lesions without atypia.

PubMed

Verschuur-Maes, Anoek H J; van Gils, Carla H; van den Bosch, Maurice A A J; De Bruin, Peter C; van Diest, Paul J

2011-09-01

The incidence of columnar cell lesions in breast core needle biopsies since full-field digital mammography in comparison with screen-filmed mammography was analyzed. As tiny microcalcifications characterize columnar cell lesions at mammography, we hypothesized that more columnar cell lesions are diagnosed since full-field digital mammography due to its higher sensitivity for microcalcifications. In all, 3437 breast core needle biopsies performed in three hospitals and resulting from in total 55 159 mammographies were revised: 1424 taken in the screen-filmed mammography and 2013 in the full-field digital mammography period. Between the screen-filmed mammography and full-field digital mammography periods, we compared the proportion of mammographies that led to core needle biopsies, the mammographic indication for core needle biopsies (density, microcalcifications, or both) and the proportion of columnar cell lesions with or without atypia. The columnar cell lesions were graded according to Schnitt, and we included atypical ductal hyperplasia arising in the context of columnar cell lesions. Proportions were compared using χ(2) tests and prevalence ratios were adjusted for age and hospital. We found that more core needle biopsies per mammogram were taken in the full-field digital mammography period (7.6%) compared with the screen-filmed mammography period (5.0%, P<0.0001). Microcalcifications were more often diagnosed with full-field digital mammography than with screen-filmed mammography (adjusted prevalence ratio: 1.14, confidence interval 95%: 1.01-1.28). Core needle biopsies from the full-field digital mammography era showed more columnar cell lesions (10.8%) than those from the screen-filmed mammography era (4.9%; adjusted prevalence ratio: 1.93, confidence interval 95%: 1.48-2.51), particularly due to more columnar cell lesions without atypia (8.2% respectively 2.8%) while the proportion of columnar cell lesions with atypia remained nearly constant (2.0 vs 2.6%). In conclusion, since the implementation of full-field digital mammography, more microcalcifications are seen at mammography, more often resulting in core needle biopsies, which especially yields more columnar cell lesions without atypia.

Can New Digital Technologies Support Parasitology Teaching and Learning?

PubMed

Jabbar, Abdul; Gasser, Robin B; Lodge, Jason

2016-07-01

Traditionally, parasitology courses have mostly been taught face-to-face on campus, but now digital technologies offer opportunities for teaching and learning. Here, we give a perspective on how new technologies might be used through student-centred teaching approaches. First, a snapshot of recent trends in the higher education is provided; then, a brief account is given of how digital technologies [e.g., massive open online courses (MOOCs), flipped classroom (FC), games, quizzes, dedicated Facebook, and digital badges] might promote parasitology teaching and learning in digital learning environments. In our opinion, some of these digital technologies might be useful for competency-based, self-regulated, learner-centred teaching and learning in an online or blended teaching environment. Copyright © 2016 Elsevier Ltd. All rights reserved.

Incidental Learning in 3D Virtual Environments: Relationships to Learning Style, Digital Literacy and Information Display

ERIC Educational Resources Information Center

Thomas, Wayne W.; Boechler, Patricia M.

2014-01-01

With teachers taking more interest in utilizing 3D virtual environments for educational purposes, research is needed to understand how learners perceive and process information within virtual environments (Eschenbrenner, Nah, & Siau, 2008). In this study, the authors sought to determine if learning style or digital literacy predict incidental…

Flexible Simulation E-Learning Environment for Studying Digital Circuits and Possibilities for It Deployment as Semantic Web Service

ERIC Educational Resources Information Center

Radoyska, P.; Ivanova, T.; Spasova, N.

2011-01-01

In this article we present a partially realized project for building a distributed learning environment for studying digital circuits Test and Diagnostics at TU-Sofia. We describe the main requirements for this environment, substantiate the developer platform choice, and present our simulation and circuit parameter calculation tools.…

Design Approach of Mathematics Learning Activities in a Digital Environment for Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Santos, Maria Isabel; Breda, Ana; Almeida, Ana Margarida

2017-01-01

Learning environment on mathematics for autistic children is a prototype of a digital environment with dynamic adaptation features designed to offer activities towards the development of mathematical reasoning in children aged 6-12 years, diagnosed with autism spectrum disorders (ASD), a neurodevelopmental disorder characterized by deficits in…

Application of High Speed Digital Image Correlation in Rocket Engine Hot Fire Testing

NASA Technical Reports Server (NTRS)

Gradl, Paul R.; Schmidt, Tim

2016-01-01

Hot fire testing of rocket engine components and rocket engine systems is a critical aspect of the development process to understand performance, reliability and system interactions. Ground testing provides the opportunity for highly instrumented development testing to validate analytical model predictions and determine necessary design changes and process improvements. To properly obtain discrete measurements for model validation, instrumentation must survive in the highly dynamic and extreme temperature application of hot fire testing. Digital Image Correlation has been investigated and being evaluated as a technique to augment traditional instrumentation during component and engine testing providing further data for additional performance improvements and cost savings. The feasibility of digital image correlation techniques were demonstrated in subscale and full scale hotfire testing. This incorporated a pair of high speed cameras to measure three-dimensional, real-time displacements and strains installed and operated under the extreme environments present on the test stand. The development process, setup and calibrations, data collection, hotfire test data collection and post-test analysis and results are presented in this paper.

The Use of Immersive Virtual Reality in the Learning Sciences: Digital Transformations of Teachers, Students, and Social Context

ERIC Educational Resources Information Center

Bailenson, Jeremy N.; Yee, Nick; Blascovich, Jim; Beall, Andrew C.; Lundblad, Nicole; Jin, Michael

2008-01-01

This article illustrates the utility of using virtual environments to transform social interaction via behavior and context, with the goal of improving learning in digital environments. We first describe the technology and theories behind virtual environments and then report data from 4 empirical studies. In Experiment 1, we demonstrated that…

Herschel Studies of the Evolution and Environs of Young Stars in the DIGIT, WISH, and FOOSH Programs

NASA Astrophysics Data System (ADS)

Green, Joel D.; DIGIT OT Key Project Team; WISH GT Key Project Team; FOOSH OT1 Team

2012-01-01

The Herschel Space Observatory has enabled us to probe the physical conditions of outer disks, envelopes, and outflows of young stellar objects, including embedded objects, Herbig Ae/Be disks, and T Tauri disks. We will report on results from three projects, DIGIT, WISH, and FOOSH. The DIGIT (Dust, Ice, and Gas in Time) program (PI: Neal Evans) utilizes the full spectral range of the PACS instrument to explore simultaneously the solid and gas-phase chemistry around sources in all of these stages. WISH (Water in Star Forming Regions with Herschel, PI Ewine van Dishoeck) focuses on observations of key lines with HIFI and line scans of selected spectral regions with PACS. FOOSH (FU Orionis Objects Surveyed with Herschel, PI Joel Green) studies FU Orionis objects with full range PACS and SPIRE scans. DIGIT includes examples of low luminosity protostars, while FOOSH studies the high luminosity objects during outburst states. Rotational ladders of highly excited CO and OH emission are detected in both disks and protostars. The highly excited lines are more commonly seen in the embedded phases, where there appear to be two temperature components. Intriguingly, water is frequently detected in spectra of embedded sources, but not in the disk spectra. In addition to gas features, we explore the extent of the newly detected 69 um forsterite dust feature in both T Tauri and Herbig Ae/Be stars. When analyzed along with the Spitzer-detected dust features, these provide constraints on a population of colder crystalline material. We will present some models of individual sources, as well as some broad statistics of the emission from these stages of star and planet formation.

DMA Modern Programming Environment Study.

DTIC Science & Technology

1980-01-01

capabilities. The centers are becoming increasingly dependent upon the computer and digital data in the fulfillment of MC&G goals. Successful application...ftticrcsrccessors C140 by Herbert AlteroDigital Citmmuncaticns C141 0 Structuredl Design ’-:orkshocr by Ned Chapin KC 156o Digital Systems En17lrceriirg CC 139 o3...on a programming environment. The study, which resulted in production of a paper entitled An EXEC 8 Programming Support Libary , contends that most of

Comparison of Iranian National Medical Library with digital libraries of selected countries.

PubMed

Zare-Farashbandi, Firoozeh; Najafi, Nayere Sadat Soleimanzade; Atashpour, Bahare

2014-01-01

The important role of information and communication technologies and their influence on methods of storing, retrieving information in digital libraries, has not only changed the meanings behind classic library activates but has also created great changes in their services. However, it seems that not all digital libraries provide their users with similar services and only some of them are successful in fulfilling their role in digital environment. The Iranian National Medical library is among those that appear to come short compared to other digital libraries around the world. By knowing the different services provided by digital libraries worldwide, one can evaluate the services provided by Iranian National Medical library. The goal of this study is a comparison between Iranian National Medical library and digital libraries of selected countries. This is an applied study and uses descriptive - survey method. The statistical population is the digital libraries around the world which were actively providing library services between October and December 2011 and were selected by using the key word "Digital Library" in Google search engine. The data-gathering tool was direct access to the websites of these digital libraries. The statistical study is descriptive and Excel software was used for data analysis and plotting of the charts. The findings showed that among the 33 digital libraries investigated worldwide, most of them provided Browse (87.87%), Search (84.84%), and Electronic information retrieval (57.57%) services. The "Help" in public services (48/48%) and "Interlibrary Loan" in traditional services (27/27%) had the highest frequency. The Iranian National Medical library provides more digital services compared to other libraries but has less classic and public services and has less than half of possible public services. Other than Iranian National Medical library, among the 33 libraries investigated, the leaders in providing different services are Library of University of California in classic services, Count Way Library of Medicine in digital services, and Library of Finland in public services. The results of this study show that among the digital libraries investigated, most provided similar public, digital, and classic services and The Iranian National Medical library has been somewhat successful in providing these services compared to other digital libraries. One can also conclude that the difference in services is at least in part due to difference in environments, information needs, and users. Iranian National Medical Library has been somewhat successful in providing library services in digital environment and needs to identify the services which are valuable to its users by identifying the users' needs and special characteristics of its environment.

Network Consumption and Storage Needs when Working in a Full-Time Routine Digital Environment in a Large Nonacademic Training Hospital.

PubMed

Nap, Marius

2016-01-01

Digital pathology is indisputably connected with high demands on data traffic and storage. As a consequence, control of the logistic process and insight into the management of both traffic and storage is essential. We monitored data traffic from scanners to server and server to workstation and registered storage needs for diagnostic images and additional projects. The results showed that data traffic inside the hospital network (1 Gbps) never exceeded 80 Mbps for scanner-to-server activity, and activity from the server to the workstation took at most 5 Mbps. Data storage per image increased from 300 MB to an average of 600 MB as a result of camera and software updates, and, due to the increased scanning speed, the scanning time was reduced with almost 8 h/day. Introduction of a storage policy of only 12 months for diagnostic images and rescanning if needed resulted in a manageable storage window of 45 TB for the period of 1 year. Using simple registration tools allowed the transition of digital pathology into a concise package that allows planning and control. Incorporating retrieval of such information from scanning and storage devices will reduce the fear of losing control by the management when introducing digital pathology in daily routine. © 2016 S. Karger AG, Basel.

The virtual digital nuclear power plant: A modern tool for supporting the lifecycle of VVER-based nuclear power units

NASA Astrophysics Data System (ADS)

Arkadov, G. V.; Zhukavin, A. P.; Kroshilin, A. E.; Parshikov, I. A.; Solov'ev, S. L.; Shishov, A. V.

2014-10-01

The article describes the "Virtual Digital VVER-Based Nuclear Power Plant" computerized system comprising a totality of verified initial data (sets of input data for a model intended for describing the behavior of nuclear power plant (NPP) systems in design and emergency modes of their operation) and a unified system of new-generation computation codes intended for carrying out coordinated computation of the variety of physical processes in the reactor core and NPP equipment. Experiments with the demonstration version of the "Virtual Digital VVER-Based NPP" computerized system has shown that it is in principle possible to set up a unified system of computation codes in a common software environment for carrying out interconnected calculations of various physical phenomena at NPPs constructed according to the standard AES-2006 project. With the full-scale version of the "Virtual Digital VVER-Based NPP" computerized system put in operation, the concerned engineering, design, construction, and operating organizations will have access to all necessary information relating to the NPP power unit project throughout its entire lifecycle. The domestically developed commercial-grade software product set to operate as an independently operating application to the project will bring about additional competitive advantages in the modern market of nuclear power technologies.

Environment and health: Probes and sensors for environment digital control

NASA Astrophysics Data System (ADS)

Schettini, Chiara

2014-05-01

The idea of studying the environment using New Technologies (NT) came from a MIUR (Ministry of Education of the Italian Government) notice that allocated funds for the realization of innovative school science projects. The "Environment and Health" project uses probes and sensors for digital control of environment (water, air and soil). The working group was composed of 4 Science teachers from 'Liceo Statale G. Mazzini ', under the coordination of teacher Chiara Schettini. The Didactic Section of Naples City of Sciences helped the teachers in developing the project and it organized a refresher course for them on the utilization of digital control sensors. The project connects Environment and Technology because the study of the natural aspects and the analysis of the chemical-physical parameters give students and teachers skills for studying the environment based on the utilization of NT in computing data elaboration. During the practical project, samples of air, water and soil are gathered in different contexts. Sample analysis was done in the school's scientific laboratory with digitally controlled sensors. The data are elaborated with specific software and the results have been written in a booklet and in a computing database. During the first year, the project involved 6 school classes (age of the students 14—15 years), under the coordination of Science teachers. The project aims are: 1) making students more aware about environmental matters 2) achieving basic skills for evaluating air, water and soil quality. 3) achieving strong skills for the utilization of digitally controlled sensors. 4) achieving computing skills for elaborating and presenting data. The project aims to develop a large environmental conscience and the need of a ' good ' environment for defending our health. Moreover it would increase the importance of NT as an instrument of knowledge.

Method and system for redundancy management of distributed and recoverable digital control system

NASA Technical Reports Server (NTRS)

Stange, Kent (Inventor); Hess, Richard (Inventor); Kelley, Gerald B (Inventor); Rogers, Randy (Inventor)

2012-01-01

A method and system for redundancy management is provided for a distributed and recoverable digital control system. The method uses unique redundancy management techniques to achieve recovery and restoration of redundant elements to full operation in an asynchronous environment. The system includes a first computing unit comprising a pair of redundant computational lanes for generating redundant control commands. One or more internal monitors detect data errors in the control commands, and provide a recovery trigger to the first computing unit. A second redundant computing unit provides the same features as the first computing unit. A first actuator control unit is configured to provide blending and monitoring of the control commands from the first and second computing units, and to provide a recovery trigger to each of the first and second computing units. A second actuator control unit provides the same features as the first actuator control unit.

Man-machine interface and control of the shuttle digital flight system

NASA Technical Reports Server (NTRS)

Burghduff, R. D.; Lewis, J. L., Jr.

1985-01-01

The space shuttle main engine (SSME) presented new requirements in the design of controls for large pump fed liquid rocket engine systems. These requirements were the need for built in full mission support capability, and complexity and flexibility of function not previously needed in this type of application. An engine mounted programmable digital control system was developed to meet these requirements. The engine system and controller and their function are described. Design challenges encountered during the course of development included accommodation for a very severe engine environment, the implementation of redundancy and redundancy management to provide fail operational/fail safe capability, removal of heat from the package, and significant constraints on computer memory size and processing time. The flexibility offered by programmable control reshaped the approach to engine design and development and set the pattern for future controls development in these types of applications.

A Methodology and Implementation for Annotating Digital Images for Context-appropriate Use in an Academic Health Care Environment

PubMed Central

Goede, Patricia A.; Lauman, Jason R.; Cochella, Christopher; Katzman, Gregory L.; Morton, David A.; Albertine, Kurt H.

2004-01-01

Use of digital medical images has become common over the last several years, coincident with the release of inexpensive, mega-pixel quality digital cameras and the transition to digital radiology operation by hospitals. One problem that clinicians, medical educators, and basic scientists encounter when handling images is the difficulty of using business and graphic arts commercial-off-the-shelf (COTS) software in multicontext authoring and interactive teaching environments. The authors investigated and developed software-supported methodologies to help clinicians, medical educators, and basic scientists become more efficient and effective in their digital imaging environments. The software that the authors developed provides the ability to annotate images based on a multispecialty methodology for annotation and visual knowledge representation. This annotation methodology is designed by consensus, with contributions from the authors and physicians, medical educators, and basic scientists in the Departments of Radiology, Neurobiology and Anatomy, Dermatology, and Ophthalmology at the University of Utah. The annotation methodology functions as a foundation for creating, using, reusing, and extending dynamic annotations in a context-appropriate, interactive digital environment. The annotation methodology supports the authoring process as well as output and presentation mechanisms. The annotation methodology is the foundation for a Windows implementation that allows annotated elements to be represented as structured eXtensible Markup Language and stored separate from the image(s). PMID:14527971

Resolution analysis of archive films for the purpose of their optimal digitization and distribution

NASA Astrophysics Data System (ADS)

Fliegel, Karel; Vítek, Stanislav; Páta, Petr; Myslík, Jiří; Pecák, Josef; Jícha, Marek

2017-09-01

With recent high demand for ultra-high-definition (UHD) content to be screened in high-end digital movie theaters but also in the home environment, film archives full of movies in high-definition and above are in the scope of UHD content providers. Movies captured with the traditional film technology represent a virtually unlimited source of UHD content. The goal to maintain complete image information is also related to the choice of scanning resolution and spatial resolution for further distribution. It might seem that scanning the film material in the highest possible resolution using state-of-the-art film scanners and also its distribution in this resolution is the right choice. The information content of the digitized images is however limited, and various degradations moreover lead to its further reduction. Digital distribution of the content in the highest image resolution might be therefore unnecessary or uneconomical. In other cases, the highest possible resolution is inevitable if we want to preserve fine scene details or film grain structure for archiving purposes. This paper deals with the image detail content analysis of archive film records. The resolution limit in captured scene image and factors which lower the final resolution are discussed. Methods are proposed to determine the spatial details of the film picture based on the analysis of its digitized image data. These procedures allow determining recommendations for optimal distribution of digitized video content intended for various display devices with lower resolutions. Obtained results are illustrated on spatial downsampling use case scenario, and performance evaluation of the proposed techniques is presented.

Autism and Digital Learning Environments: Processes of Interaction and Mediation

ERIC Educational Resources Information Center

Passerino, Liliana M.; Santarosa, Lucila M. Costi

2008-01-01

Using a socio-historical perspective to explain social interaction and taking advantage of information and communication technologies (ICTs) currently available for creating digital learning environments (DLEs), this paper seeks to redress the absence of empirical data concerning technology-aided social interaction between autistic individuals. In…

Curriculum for Digital Education Leadership: A Concept Paper

ERIC Educational Resources Information Center

Brown, Cheryl; Czerniewicz, Laura; Huang, Cheng-Wen; Mayisela, Tabisa

2016-01-01

The Commonwealth Digital Education Leadership Training in Action (C-DELTA) is a long-term programme of the Commonwealth of Learning (COL) to promote a digital education environment in Commonwealth Member Nations. This concept paper proposes a holistic approach to conceptualising digital education leadership. The C-DELTA programme will provide a…

"Scratch"ing below the Surface: Mathematics through an Alternative Digital Lens?

ERIC Educational Resources Information Center

Calder, Nigel; Taylor, Merilyn

2010-01-01

A key element in the examination of how students process mathematics through digital technologies is considering the ways that digital pedagogical media might influence the learning process. How might students' understanding emerge through engagement in a digital-learning environment? Interactive software that has cross-curricula implications and…

Digital Natives? New and Old Media and Children's Outcomes

ERIC Educational Resources Information Center

Bittman, Michael; Rutherford, Leonie; Brown, Jude; Unsworth, Lens

2011-01-01

The current generation of young children has been described as "digital natives", having been born into a ubiquitous digital media environment. They are envisaged as educationally independent of the guided interaction provided by "digital immigrants": parents and teachers. This article uses data from the Longitudinal Study of…

Brief Report: Preliminary Proposal of a Conceptual Model of a Digital Environment for Developing Mathematical Reasoning in Students with Autism Spectrum Disorders.

PubMed

Santos, Maria Isabel; Breda, Ana; Almeida, Ana Margarida

2015-08-01

There is clear evidence that in typically developing children reasoning and sense-making are essential in all mathematical learning and understanding processes. In children with autism spectrum disorders (ASD), however, these become much more significant, considering their importance to successful independent living. This paper presents a preliminary proposal of a digital environment, specifically targeted to promote the development of mathematical reasoning in students with ASD. Given the diversity of ASD, the prototyping of this environment requires the study of dynamic adaptation processes and the development of activities adjusted to each user's profile. We present the results obtained during the first phase of this ongoing research, describing a conceptual model of the proposed digital environment. Guidelines for future research are also discussed.

Use of Digital Storytelling in Biology Teaching

ERIC Educational Resources Information Center

Karakoyun, Ferit; Yapici, I. Ümit

2016-01-01

With the technological developments in the 21st century, it is now necessary to integrate technological renovations effectively into teaching-learning environments. There are several approaches that allow integration of technology into teaching-learning environments. One of these approaches is digital storytelling. The purpose of this study was to…

Research Practices, Evaluation and Infrastructure in the Digital Environment

ERIC Educational Resources Information Center

Houghton, John W.

2004-01-01

This paper examines changing research practices in the digital environment and draws out implications for research evaluation and the development of research infrastructure. Reviews of the literature, quantitative indicators of research activities and our own field research in Australia suggest that a new mode of knowledge production is emerging,…

Scientific Inquiry, Digital Literacy, and Mobile Computing in Informal Learning Environments

ERIC Educational Resources Information Center

Marty, Paul F.; Alemanne, Nicole D.; Mendenhall, Anne; Maurya, Manisha; Southerland, Sherry A.; Sampson, Victor; Douglas, Ian; Kazmer, Michelle M.; Clark, Amanda; Schellinger, Jennifer

2013-01-01

Understanding the connections between scientific inquiry and digital literacy in informal learning environments is essential to furthering students' critical thinking and technology skills. The Habitat Tracker project combines a standards-based curriculum focused on the nature of science with an integrated system of online and mobile computing…

Digital Games as Multirepresentational Environments for Science Learning: Implications for Theory, Research, and Design

ERIC Educational Resources Information Center

Virk, Satyugjit; Clark, Douglas; Sengupta, Pratim

2015-01-01

Environments in which learning involves coordinating multiple external representations (MERs) can productively support learners in making sense of complex models and relationships. Educational digital games provide an increasing popular medium for engaging students in manipulating and exploring such models and relationships. This article applies…

The Comparison of Students' Satisfaction between Ubiquitous and Web-Based Learning Environments

ERIC Educational Resources Information Center

Virtanen, Mari Aulikki; Kääriäinen, Maria; Liikanen, Eeva; Haavisto, Elina

2017-01-01

Higher education is moving towards digitalized learning. The rapid development of technological resources, devices and wireless networks enables more flexible opportunities to study and learn in innovative learning environments. New technologies enable combining of authentic and virtual learning spaces and digital resources as multifunctional…

A new method for assessing the accuracy of full arch impressions in patients.

PubMed

Kuhr, F; Schmidt, A; Rehmann, P; Wöstmann, B

2016-12-01

To evaluate a new method of measuring the real deviation (trueness) of full arch impressions intraorally and to investigate the trueness of digital full arch impressions in comparison to a conventional impression procedure in clinical use. Four metal spheres were fixed with composite using a metal application aid to the lower teeth of 50 test subjects as reference structures. One conventional impression (Impregum Penta Soft) with subsequent type-IV gypsum model casting (CI) and three different digital impressions were performed in the lower jaw of each test person with the following intraoral scanners: Sirona CEREC Omnicam (OC), 3M True Definition (TD), Heraeus Cara TRIOS (cT). The digital and conventional (gypsum) models were analyzed relative to the spheres. Linear distance and angle measurements between the spheres, as well as digital superimpositions of the spheres with the reference data set were executed. With regard to the distance measurements, CI showed the smallest deviations followed by intraoral scanners TD, cT and OC. A digital superimposition procedure yielded the same order for the outcomes: CI (15±4μm), TD (23±9μm), cT (37±14μm), OC (214±38μm). Angle measurements revealed the smallest deviation for TD (0.06°±0,07°) followed by CI (0.07°±0.07°), cT (0.13°±0.15°) and OC (0.28°±0.21°). The new measuring method is suitable for measuring the dimensional accuracy of full arch impressions intraorally. CI is still significantly more accurate than full arch scans with intraoral scanners in clinical use. Conventional full arch impressions with polyether impression materials are still more accurate than full arch digital impressions. Digital impression systems using powder application and active wavefront sampling technology achieve the most accurate results in comparison to other intraoral scanning systems (DRKS-ID: DRKS00009360, German Clinical Trials Register). Copyright © 2016 Elsevier Ltd. All rights reserved.

Fiber optic accelerometer

NASA Technical Reports Server (NTRS)

August, R. R.

1981-01-01

Low-cost, rugged lightweight accelerometer has been developed that converts mechanical motion into digitized optical outputs and is immune to electromagnetic and electrostatic interferences. Instrument can be placed in hostile environment, such as engine under test, and output led out through miscellany of electrical fields, high temperatures, etc., by optic fiber cables to benign environment of test panel. There, digitized optical signals can be converted to electrical signals for use in standard electrical equipment or used directly in optical devices, such as optical digital computer.

Keeping Dublin Core Simple: Cross-Domain Discovery or Resource Description?; First Steps in an Information Commerce Economy: Digital Rights Management in the Emerging E-Book Environment; Interoperability: Digital Rights Management and the Emerging EBook Environment; Searching the Deep Web: Direct Query Engine Applications at the Department of Energy.

ERIC Educational Resources Information Center

Lagoze, Carl; Neylon, Eamonn; Mooney, Stephen; Warnick, Walter L.; Scott, R. L.; Spence, Karen J.; Johnson, Lorrie A.; Allen, Valerie S.; Lederman, Abe

2001-01-01

Includes four articles that discuss Dublin Core metadata, digital rights management and electronic books, including interoperability; and directed query engines, a type of search engine designed to access resources on the deep Web that is being used at the Department of Energy. (LRW)

Exploring virtual reality technology and the Oculus Rift for the examination of digital pathology slides.

PubMed

Farahani, Navid; Post, Robert; Duboy, Jon; Ahmed, Ishtiaque; Kolowitz, Brian J; Krinchai, Teppituk; Monaco, Sara E; Fine, Jeffrey L; Hartman, Douglas J; Pantanowitz, Liron

2016-01-01

Digital slides obtained from whole slide imaging (WSI) platforms are typically viewed in two dimensions using desktop personal computer monitors or more recently on mobile devices. To the best of our knowledge, we are not aware of any studies viewing digital pathology slides in a virtual reality (VR) environment. VR technology enables users to be artificially immersed in and interact with a computer-simulated world. Oculus Rift is among the world's first consumer-targeted VR headsets, intended primarily for enhanced gaming. Our aim was to explore the use of the Oculus Rift for examining digital pathology slides in a VR environment. An Oculus Rift Development Kit 2 (DK2) was connected to a 64-bit computer running Virtual Desktop software. Glass slides from twenty randomly selected lymph node cases (ten with benign and ten malignant diagnoses) were digitized using a WSI scanner. Three pathologists reviewed these digital slides on a 27-inch 5K display and with the Oculus Rift after a 2-week washout period. Recorded endpoints included concordance of final diagnoses and time required to examine slides. The pathologists also rated their ease of navigation, image quality, and diagnostic confidence for both modalities. There was 90% diagnostic concordance when reviewing WSI using a 5K display and Oculus Rift. The time required to examine digital pathology slides on the 5K display averaged 39 s (range 10-120 s), compared to 62 s with the Oculus Rift (range 15-270 s). All pathologists confirmed that digital pathology slides were easily viewable in a VR environment. The ratings for image quality and diagnostic confidence were higher when using the 5K display. Using the Oculus Rift DK2 to view and navigate pathology whole slide images in a virtual environment is feasible for diagnostic purposes. However, image resolution using the Oculus Rift device was limited. Interactive VR technologies such as the Oculus Rift are novel tools that may be of use in digital pathology.

[Strength and weaknesses of the German digital health economy].

PubMed

Leppert, Florian; Gerlach, Jan; Ostwald, Dennis A; Greiner, Wolfgang

2017-07-26

There are high expectations from digitalization of health care, ehealth and telemedicine. Nevertheless, the diffusion of these services falls short of expectations. This study analyses the strength and weaknesses of the German digital health economy. Thereby, we specially focus on small and medium-sized enterprises (SME). The study is based on a literature review, interviews of experts and a workshop. The digital health economy is influenced by a heterogeneous environment with both promotive and obstructive factors. One of the largest weaknesses results from a lack of business models. There is a lack of possibilities of reimbursement by the Statutory Health Insurance (SHI). In addition, private users only have a small willingness to pay for digital services. The large number of regulations makes the implementation even harder, especially for SMEs. Thus, the current environment hampers fast diffusion of digital services in the German health care market. © Georg Thieme Verlag KG Stuttgart · New York.

Comparison of Iranian National Medical Library with digital libraries of selected countries

PubMed Central

Zare-Farashbandi, Firoozeh; Najafi, Nayere Sadat Soleimanzade; Atashpour, Bahare

2014-01-01

Introduction: The important role of information and communication technologies and their influence on methods of storing, retrieving information in digital libraries, has not only changed the meanings behind classic library activates but has also created great changes in their services. However, it seems that not all digital libraries provide their users with similar services and only some of them are successful in fulfilling their role in digital environment. The Iranian National Medical library is among those that appear to come short compared to other digital libraries around the world. By knowing the different services provided by digital libraries worldwide, one can evaluate the services provided by Iranian National Medical library. The goal of this study is a comparison between Iranian National Medical library and digital libraries of selected countries. Materials and Methods: This is an applied study and uses descriptive – survey method. The statistical population is the digital libraries around the world which were actively providing library services between October and December 2011 and were selected by using the key word “Digital Library” in Google search engine. The data-gathering tool was direct access to the websites of these digital libraries. The statistical study is descriptive and Excel software was used for data analysis and plotting of the charts. Results: The findings showed that among the 33 digital libraries investigated worldwide, most of them provided Browse (87.87%), Search (84.84%), and Electronic information retrieval (57.57%) services. The “Help” in public services (48/48%) and “Interlibrary Loan” in traditional services (27/27%) had the highest frequency. The Iranian National Medical library provides more digital services compared to other libraries but has less classic and public services and has less than half of possible public services. Other than Iranian National Medical library, among the 33 libraries investigated, the leaders in providing different services are Library of University of California in classic services, Count Way Library of Medicine in digital services, and Library of Finland in public services. Results and Discussion: The results of this study show that among the digital libraries investigated, most provided similar public, digital, and classic services and The Iranian National Medical library has been somewhat successful in providing these services compared to other digital libraries. One can also conclude that the difference in services is at least in part due to difference in environments, information needs, and users. Conclusion: Iranian National Medical Library has been somewhat successful in providing library services in digital environment and needs to identify the services which are valuable to its users by identifying the users’ needs and special characteristics of its environment PMID:25540782

In-vitro evaluation of the accuracy of conventional and digital methods of obtaining full-arch dental impressions.

PubMed

Ender, Andreas; Mehl, Albert

2015-01-01

To investigate the accuracy of conventional and digital impression methods used to obtain full-arch impressions by using an in-vitro reference model. Eight different conventional (polyether, POE; vinylsiloxanether, VSE; direct scannable vinylsiloxanether, VSES; and irreversible hydrocolloid, ALG) and digital (CEREC Bluecam, CER; CEREC Omnicam, OC; Cadent iTero, ITE; and Lava COS, LAV) full-arch impressions were obtained from a reference model with a known morphology, using a highly accurate reference scanner. The impressions obtained were then compared with the original geometry of the reference model and within each test group. A point-to-point measurement of the surface of the model using the signed nearest neighbour method resulted in a mean (10%-90%)/2 percentile value for the difference between the impression and original model (trueness) as well as the difference between impressions within a test group (precision). Trueness values ranged from 11.5 μm (VSE) to 60.2 μm (POE), and precision ranged from 12.3 μm (VSE) to 66.7 μm (POE). Among the test groups, VSE, VSES, and CER showed the highest trueness and precision. The deviation pattern varied with the impression method. Conventional impressions showed high accuracy across the full dental arch in all groups, except POE and ALG. Conventional and digital impression methods show differences regarding full-arch accuracy. Digital impression systems reveal higher local deviations of the full-arch model. Digital intraoral impression systems do not show superior accuracy compared to highly accurate conventional impression techniques. However, they provide excellent clinical results within their indications applying the correct scanning technique.

Examining the Characteristics of Digital Learning Games Designed by In-Service Teachers

ERIC Educational Resources Information Center

An, Yun-Jo; Cao, Li

2017-01-01

In order to better understand teachers' perspectives on the design and development of digital game-based learning environments, this study examined the characteristics of digital learning games designed by teachers. In addition, this study explored how game design and peer critique activities influenced their perceptions of digital game-based…

Digital Literacy: A Prerequisite for Effective Learning in a Blended Learning Environment?

ERIC Educational Resources Information Center

Tang, Chun Meng; Chaw, Lee Yen

2016-01-01

Blended learning has propelled into mainstream education in recent years with the help of digital technology. Commonly available digital devices and the Internet have made access to learning resources such as learning management systems, online libraries, digital media, etc. convenient and flexible for both lecturers and students. Beyond the…

Image Acquisition and Quality in Digital Radiography.

PubMed

Alexander, Shannon

2016-09-01

Medical imaging has undergone dramatic changes and technological breakthroughs since the introduction of digital radiography. This article presents information on the development of digital radiography and types of digital radiography systems. Aspects of image quality and radiation exposure control are highlighted as well. In addition, the article includes related workplace changes and medicolegal considerations in the digital radiography environment. ©2016 American Society of Radiologic Technologists.

Design and clinical evaluation of a high-capacity digital image archival library and high-speed network for the replacement of cinefilm in the cardiac angiography environment

NASA Astrophysics Data System (ADS)

Cusma, Jack T.; Spero, Laurence A.; Groshong, Bennett R.; Cho, Teddy; Bashore, Thomas M.

1993-09-01

An economical and practical digital solution for the replacement of 35 mm cine film as the archive media in the cardiac x-ray imaging environment has remained lacking to date due to the demanding requirements of high capacity, high acquisition rate, high transfer rate, and a need for application in a distributed environment. A clinical digital image library and network based on the D2 digital video format has been installed in the Duke University Cardiac Catheterization Laboratory. The system architecture includes a central image library with digital video recorders and robotic tape retrieval, three acquisition stations, and remote review stations connected via a serial image network. The library has a capacity for over 20,000 Gigabytes of uncompressed image data, equivalent to records for approximately 20,000 patients. Image acquisition in the clinical laboratories is via a real-time digital interface between the digital angiography system and a local digital recorder. Images are transferred to the library over the serial network at a rate of 14.3 Mbytes/sec and permanently stored for later review. The image library and network are currently undergoing a clinical comparison with cine film for visual and quantitative assessment of coronary artery disease. At the conclusion of the evaluation, the configuration will be expanded to include four additional catheterization laboratories and remote review stations throughout the hospital.

A vision-based system for measuring the displacements of large structures: Simultaneous adaptive calibration and full motion estimation

NASA Astrophysics Data System (ADS)

Santos, C. Almeida; Costa, C. Oliveira; Batista, J.

2016-05-01

The paper describes a kinematic model-based solution to estimate simultaneously the calibration parameters of the vision system and the full-motion (6-DOF) of large civil engineering structures, namely of long deck suspension bridges, from a sequence of stereo images captured by digital cameras. Using an arbitrary number of images and assuming a smooth structure motion, an Iterated Extended Kalman Filter is used to recursively estimate the projection matrices of the cameras and the structure full-motion (displacement and rotation) over time, helping to meet the structure health monitoring fulfilment. Results related to the performance evaluation, obtained by numerical simulation and with real experiments, are reported. The real experiments were carried out in indoor and outdoor environment using a reduced structure model to impose controlled motions. In both cases, the results obtained with a minimum setup comprising only two cameras and four non-coplanar tracking points, showed a high accuracy results for on-line camera calibration and structure full motion estimation.

COMPLEX CONDITIONAL CONTROL BY PIGEONS IN A CONTINUOUS VIRTUAL ENVIRONMENT

PubMed Central

Qadri, Muhammad A. J.; Reid, Sean; Cook, Robert G.

2016-01-01

We tested two pigeons in a continuously streaming digital environment. Using animation software that constantly presented a dynamic, three-dimensional (3D) environment, the animals were tested with a conditional object identification task. The correct object at a given time depended on the virtual context currently streaming in front of the pigeon. Pigeons were required to accurately peck correct target objects in the environment for food reward, while suppressing any pecks to intermixed distractor objects which delayed the next object’s presentation. Experiment 1 established that the pigeons’ discrimination of two objects could be controlled by the surface material of the digital terrain. Experiment 2 established that the pigeons’ discrimination of four objects could be conjunctively controlled by both the surface material and topography of the streaming environment. These experiments indicate that pigeons can simultaneously process and use at least two context cues from a streaming environment to control their identification behavior of passing objects. These results add to the promise of testing interactive digital environments with animals to advance our understanding of cognition and behavior. PMID:26781058

A monitor for the laboratory evaluation of control integrity in digital control systems operating in harsh electromagnetic environments

NASA Technical Reports Server (NTRS)

Belcastro, Celeste M.; Fischl, Robert; Kam, Moshe

1992-01-01

This paper presents a strategy for dynamically monitoring digital controllers in the laboratory for susceptibility to electromagnetic disturbances that compromise control integrity. The integrity of digital control systems operating in harsh electromagnetic environments can be compromised by upsets caused by induced transient electrical signals. Digital system upset is a functional error mode that involves no component damage, can occur simultaneously in all channels of a redundant control computer, and is software dependent. The motivation for this work is the need to develop tools and techniques that can be used in the laboratory to validate and/or certify critical aircraft controllers operating in electromagnetically adverse environments that result from lightning, high-intensity radiated fields (HIRF), and nuclear electromagnetic pulses (NEMP). The detection strategy presented in this paper provides dynamic monitoring of a given control computer for degraded functional integrity resulting from redundancy management errors, control calculation errors, and control correctness/effectiveness errors. In particular, this paper discusses the use of Kalman filtering, data fusion, and statistical decision theory in monitoring a given digital controller for control calculation errors.

Changing Our Future: Issues in Leadership and Management Skills and the Information Profession.

ERIC Educational Resources Information Center

Mercer, Prue

This paper explores the issues and opportunities for information providers in a digital environment where the skills of management of change and leadership are necessary to create vital and healthy organizations. The first section discusses challenges of the digital environment and skills for the information profession, including the impact of…

Comparing Tactile Maps and Haptic Digital Representations of a Maritime Environment

ERIC Educational Resources Information Center

Simonnet, Mathieu; Vieilledent, Steephane; Jacobson, R. Daniel; Tisseau, Jacques

2011-01-01

A map exploration and representation exercise was conducted with participants who were totally blind. Representations of maritime environments were presented either with a tactile map or with a digital haptic virtual map. We assessed the knowledge of spatial configurations using a triangulation technique. The results revealed that both types of…

Putting ECD into Practice: The Interplay of Theory and Data in Evidence Models within a Digital Learning Environment

ERIC Educational Resources Information Center

Rupp, Andre A.; Levy, Roy; Dicerbo, Kristen E.; Sweet, Shauna J.; Crawford, Aaron V.; Calico, Tiago; Benson, Martin; Fay, Derek; Kunze, Katie L.; Mislevy, Robert J.; Behrens, John T.

2012-01-01

In this paper we describe the development and refinement of "evidence rules" and "measurement models" within the "evidence model" of the "evidence-centered design" (ECD) framework in the context of the "Packet Tracer" digital learning environment of the "Cisco Networking Academy." Using…

Empowering Knowledge-Building Pedagogy in Online Environments: Creating Digital Moments to Transform Practice

ERIC Educational Resources Information Center

Barber, Wendy; Taylor, Stacey; Buchanan, Sylvia

2014-01-01

The purpose of this paper is to examine a specific online pedagogical tool, "Digital Moments" that can be an effective strategy for building online communities in a knowledge building environment. While the paper will examine the specific techniques and teaching methodologies that enabled the authors to create authentic online learning…

Researching Photographic Participatory Inquiry in an E-Learning Environment

ERIC Educational Resources Information Center

Grushka, Kathryn Meyer; Bellette, Aaron; Holbrook, Allyson

2014-01-01

This article focuses on the use of Photographic Participatory Inquiry (PPI) in researching the teaching and learning of photography in the e-learning environment. It is an arts-informed method drawing on digital tools to capture collective information as digital artefacts, which can then be accessed and harnessed to build critical and reflective…

FODEM: Developing Digital Learning Environments in Widely Dispersed Learning Communities

ERIC Educational Resources Information Center

Suhonen, Jarkko; Sutinen, Erkki

2006-01-01

FODEM (FOrmative DEvelopment Method) is a design method for developing digital learning environments for widely dispersed learning communities. These are communities in which the geographical distribution and density of learners is low when compared to the kind of learning communities in which there is a high distribution and density of learners…

Learning Tools for Knowledge Nomads: Using Personal Digital Assistants (PDAs) in Web-based Learning Environments.

ERIC Educational Resources Information Center

Loh, Christian Sebastian

2001-01-01

Examines how mobile computers, or personal digital assistants (PDAs), can be used in a Web-based learning environment. Topics include wireless networks on college campuses; online learning; Web-based learning technologies; synchronous and asynchronous communication via the Web; content resources; Web connections; and collaborative learning. (LRW)

Social Tagging in a Scholarly Digital Library Environment: Users' Perspectives

ERIC Educational Resources Information Center

Noorhidawati, A.; Hanum, N. Fariza; Zohoorian-Fooladi, N.

2013-01-01

Introduction: This paper reports an exploratory study examining how users participate in social tagging activities in a scholarly digital library environment to learn about their motivations, behaviour, and practices. Method: This study was conducted in two phases: a survey to investigate usage and attitudes of social tagging tool, and a…

Using a bespoke situated digital kiosk to encourage user participation in healthcare environment design.

PubMed

Mackrill, J; Marshall, P; Payne, S R; Dimitrokali, E; Cain, R

2017-03-01

Involving users through participation in healthcare service and environment design is growing. Existing approaches and toolkits for practitioners and researchers are often paper based involving workshops and other more traditional design approaches such as paper prototyping. The advent of digital technology provides the opportunity to explore new platforms for user participation. This paper presents results from three studies that used a bespoke situated user participation digital kiosk, engaging 33 users in investigating healthcare environment design. The studies, from primary and secondary care settings, allowed participant feedback on each environment and proved a novel, engaging "21st century" way to participate in the appraisal of the design process. The results point toward this as an exciting and growing area of research in developing not just a new method of user participation but also the technology that supports it. Limitations were noted in terms of data validity and engagement with the device. To guide the development of user participation using similar situated digital devices, key lessons and reflections are presented. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

DIGITAL LINE GRAPHS - USGS

EPA Science Inventory

USGS DLGs are digital representations of program-quadrangle format and sectional maps. All DLG data distributed by the United States Geological Survey (USGS) are DLG-Level 3 (DLG-3), which means the data contain a full range of attribute codes, have full topological structuring, ...

Accuracy, reliability, and efficiency of intraoral scanners for full-arch impressions: a systematic review of the clinical evidence.

PubMed

Goracci, Cecilia; Franchi, Lorenzo; Vichi, Alessandro; Ferrari, Marco

2016-08-01

The interest on intraoral scanners for digital impressions has been growing and new devices are continuously introduced on the market. It is timely to verify whether the several scanners proposed for full-arch digital impressions have been tested under clinical conditions for validity, repeatability, reproducibility, as well as for time efficiency, and patient acceptance. An electronic search of the literature was conducted through PubMed, Scopus, Cochrane Library, Web of Science, and Embase, entering the query terms 'digital impression', 'intraoral digital impression', 'intraoral scanning', 'intraoral scanner', 'intraoral digital scanner', combined by the Boolean operator 'OR'. No language or time limitation was applied. Only studies where digital full-arch impressions had been recorded intraorally were considered. In only eight studies full-arch scans had been performed intraorally. Only four studies reported data on validity, repeatability, reproducibility of digital measurements and their samples were limited to subjects in complete permanent dentition. Only two intraoral scanners, Lava COS and iTero, were tested. Scanning times were measured in six studies and varied largely. Patients' acceptance of intraoral scanning was evaluated in four studies, but it was not specifically assessed for children. The scientific evidence so far collected on intraoral scanning is neither exhaustive, nor up-to-date. Data from full-arch scans performed in children should be collected. For a meaningful assessment of time efficiency, agreement should be reached on the procedural steps to be included in the computation of scanning time. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

The Coming of Digital Desktop Media.

ERIC Educational Resources Information Center

Galbreath, Jeremy

1992-01-01

Discusses the movement toward digital-based platforms including full-motion video for multimedia products. Hardware- and software-based compression techniques for digital data storage are considered, and a chart summarizes features of Digital Video Interactive, Moving Pictures Experts Group, P x 64, Joint Photographic Experts Group, Apple…

Representing Value as Digital Object: A Discussion of Transferability and Anonymity; Digital Library Initiatives of the Deutsche Forschungsgemeinschaft; CrossRef Turns One; Fermi National Accelerator Laboratory (Fermilab).

ERIC Educational Resources Information Center

Kahn, Robert E.; Lyons, Patrice A.; Brahms, Ewald; Brand, Amy; van den Bergen, Mieke

2001-01-01

Includes four articles that discuss the use of digital objects to represent value in a network environment; digital library initiatives at the central public funding organization for academic research in Germany; an application of the Digital Object Identifier System; and the Web site of the Fermi National Accelerator Laboratory. (LRW)

Teachers' Dispositions towards the Role of Digital Devices in Play-Based Pedagogy in Early Childhood Education

ERIC Educational Resources Information Center

Palaiologou, Ioanna

2016-01-01

A body of research is emerging on early childhood education teachers' views on the integration of digital technologies in their practice. Despite evidence of the digitalisation of homes in affluent societies and children's interactions in highly mediated digital environments, few teachers so far have integrated digital devices into a play-based…

Digital Histories for the Digital Age: Collaborative Writing in Large Lecture Courses

ERIC Educational Resources Information Center

Soh, Leen-Kiat; Khandaker, Nobel; Thomas, William G.

2013-01-01

The digital environment has had an immense effect on American society, learning, and education: we have more sources available at our fingertips than any previous generation. Teaching and learning with these new sources, however, has been a challenging transition. Students are confronted with an ocean of digital objects and need skills to navigate…

Social Welfare Implications of the Digital Divide

ERIC Educational Resources Information Center

Kim, Eunjin; Lee, Byungtae; Menon, Nirup M.

2009-01-01

The Internet plays a critical role in informing individuals about society, politics, business, and the environment. So much so that it has been said that the digital divide makes the segment of society on the ''right side'' of the divide (the digitally endowed group) better off and that on the ''wrong side'' (the digitally challenged group) worse…

Student Experiences and Perceptions of Digital Literacy Skills Development: Engaging Learners by Design?

ERIC Educational Resources Information Center

Hall, Marion; Nix, Ingrid; Baker, Kirsty

2013-01-01

In the current digital environment, it is vital for learners to develop digital literacy skills. The UK's Quality Assurance Agency for Higher Education (HE) requires graduates to demonstrate digital literacy. Employers consider these skills essential. With the high cost of HE in the UK, learners themselves also expect university courses to…

Libraries in Today's Digital Age: The Copyright Controversy. ERIC Digest.

ERIC Educational Resources Information Center

Russell, Carrie

This digest focuses on the continuing ambiguities libraries and their users face in dealing with copyright in the digital environment. In the networked digital world, the basic principles of copyright are more difficult to apply. Digital copies are easy to create, modify, and manipulate, they are extremely easy to distribute widely over networks,…

DIGITAL LINE GRAPHS - USGS 1:24,000

EPA Science Inventory

USGS DLGs are digital representations of program-quadrangle format and sectional maps. All DLG data distributed by the United States Geological Survey (USGS) are DLG-Level 3 (DLG-3), which means the data contain a full range of attribute codes, have full topological structuring, ...

DIGITAL LINE GRAPHS - USGS 1:100,000

EPA Science Inventory

USGS DLGs are digital representations of program-quadrangle format and sectional maps. All DLG data distributed by the United States Geological Survey (USGS) are DLG-Level 3 (DLG-3), which means the data contain a full range of attribute codes, have full topological structuring, ...

Virtual Reality and Interactive Digital Game Technology: New Tools to Address Obesity and Diabetes

PubMed Central

“Skip” Rizzo, Albert; Lange, Belinda; Suma, Evan A; Bolas, Mark

2011-01-01

The convergence of the exponential advances in virtual reality (VR)-enabling technologies with a growing body of clinical research and experience has fueled the evolution of the discipline of clinical VR. This article begins with a brief overview of methods for producing and delivering VR environments that can be accessed by users for a range of clinical health conditions. Interactive digital games and new forms of natural movement-based interface devices are also discussed in the context of the emerging area of exergaming, along with some of the early results from studies of energy expenditure during the use of these systems. While these results suggest that playing currently available active exergames uses significantly more energy than sedentary activities and is equivalent to a brisk walk, these activities do not reach the level of intensity that would match playing the actual sport, nor do they deliver the recommended daily amount of exercise for children. However, these results provide some support for the use of digital exergames using the current state of technology as a complement to, rather than a replacement, for regular exercise. This may change in the future as new advances in novel full-body interaction systems for providing vigorous interaction with digital games are expected to drive the creation of engaging, low-cost interactive game-based applications designed to increase exercise participation in persons at risk for obesity. PMID:21527091

Exploring Digisonde Ionogram Data with SAO-X and DIDBase

NASA Astrophysics Data System (ADS)

Khmyrov, Grigori M.; Galkin, Ivan A.; Kozlov, Alexander V.; Reinisch, Bodo W.; McElroy, Jonathan; Dozois, Claude

2008-02-01

A comprehensive suite of software tools for ionogram data analysis and archiving has been developed at UMLCAR to support the exploration of raw and processed data from the worldwide network of digisondes in a low-latency, user-friendly environment. Paired with the remotely accessible Digital Ionogram Data Base (DIDBase), the SAO Explorer software serves as an example of how an academic institution conscientiously manages its resident data archive while local experts continue to work on design of new and improved data products, all in the name of free public access to the full roster of acquired ionospheric sounding data.

The Challenges of Digital Leadership

ERIC Educational Resources Information Center

McLeod, Scott

2015-01-01

Because digital devices and online environments can simultaneously be transformatively empowering and maddeningly disruptive, the work of integrating digital learning tools into schools is usually difficult and complex. Common challenges arise, however, and can be thoughtfully addressed by proactive leadership. In the end, technology change in…

Analysis of French Secondary School Teachers' Intention to Integrate Digital Work Environments into Their Teaching Practices

ERIC Educational Resources Information Center

Pacurar, Ecaterina; Abbas, Nargis

2015-01-01

This research investigates the effective use of Digital Work Environment (DWE) in France. A theoretical framework based on the pedagogical engineering approach is used to propose an hypothetical model, which results in an explained variable of intention for the pedagogical use of an educational technology. The sex, the teaching disciplines, the…

Evidence-Centered Design for Diagnostic Assessment within Digital Learning Environments: Integrating Modern Psychometrics and Educational Data Mining

ERIC Educational Resources Information Center

Rupp, André A.; Nugent, Rebecca; Nelson, Brian

2012-01-01

In recent years the educational community has increasingly embraced digital technologies for the purposes of developing alternative learning environments, providing diagnostic feedback, and fostering the development of so-called 21st-century skills. This special issue is dedicated to bridging recent work from the disciplines of educational and…

Eye Tracking and Early Detection of Confusion in Digital Learning Environments: Proof of Concept

ERIC Educational Resources Information Center

Pachman, Mariya; Arguel, Amaël; Lockyer, Lori; Kennedy, Gregor; Lodge, Jason M.

2016-01-01

Research on incidence of and changes in confusion during complex learning and problem-solving calls for advanced methods of confusion detection in digital learning environments (DLEs). In this study we attempt to address this issue by investigating the use of multiple measures, including psychophysiological indicators and self-ratings, to detect…

Open and Anonymous Peer Review in a Digital Online Environment Compared in Academic Writing Context

ERIC Educational Resources Information Center

Razi, Salim

2016-01-01

This study compares the impact of "open" and "anonymous" peer feedback as an adjunct to teacher-mediated feedback in a digital online environment utilising data gathered on an academic writing course at a Turkish university. Students were divided into two groups with similar writing proficiencies. Students peer reviewed papers…

The Effects of Digital Storytelling on Student Achievement, Social Presence, and Attitude in Online Collaborative Learning Environments

ERIC Educational Resources Information Center

Nam, Chang Woo

2017-01-01

This study investigated the effects of digital storytelling on student achievement, social presence, and attitude in online collaborative learning environments. Students in one middle school course were randomly assigned to one of the two treatment groups after they received initial general instruction regarding teamwork skills. The "digital…

Learners' and Teachers' Voices in Developing Digital Language Learning Environments: Insights from a Survey

ERIC Educational Resources Information Center

Niinivaara, Janne; Vaattovaara, Johanna

2018-01-01

This article deals with a learning environment survey conducted among University of Helsinki students and language teachers in the university's Language Centre (LC). The survey was designed to acquire information for the development of a practical strategy for the digitalization of language learning and teaching by the local LC. The article…

Perceived Affordances, Tensions, and Complementarities in the Physical and Digital Environments Frequented by Future Teachers

ERIC Educational Resources Information Center

Pruneau, Diane; Kerry, Jackie; Freiman, Viktor; Langis, Joanne; Bizid, Mohamed

2016-01-01

Is future teachers' contact with the physical environment significant enough for them to choose to educate their students about sustainability? These digital natives stand out from previous generations by their way of living. The research based on grounded theory was aimed at understanding future teachers' relationships with physical and…

Categorizing the Educational Affordances of 3-Dimensional Immersive Digital Environments

ERIC Educational Resources Information Center

Rueda, Christian Jonathan Angel; Godínes, Juan Carlos Valdés; Rudman, Paul Douglas

2018-01-01

Aim/Purpose: This paper provides a general-purpose categorization scheme for assessing the utility of new and emerging three-dimensional interactive digital environments (3D-IDEs), along with specific pedagogic approaches that are known to work. It argues for the use of 3D-IDEs on the basis of their ludic appeal and ability to provide intrinsic…

Writing and Publishing in a Blended Learning Environment to Develop Students' Scholarly Digital Ethos

ERIC Educational Resources Information Center

Fogleman, Jay; Niedbala, Mona Anne; Bedell, Francesca

2013-01-01

How do educators leverage students' fluency with ubiquitous information and communication sources to foster a scholarly digital ethos? This article describes a blended learning environment designed to engage first-year students in 21st-century emerging forms of scholarship and publication. The authors describe an effort to reverse the millennials'…

Digital Versus Conventional Impressions in Fixed Prosthodontics: A Review.

PubMed

Ahlholm, Pekka; Sipilä, Kirsi; Vallittu, Pekka; Jakonen, Minna; Kotiranta, Ulla

2018-01-01

To conduct a systematic review to evaluate the evidence of possible benefits and accuracy of digital impression techniques vs. conventional impression techniques. Reports of digital impression techniques versus conventional impression techniques were systematically searched for in the following databases: Cochrane Central Register of Controlled Trials, PubMed, and Web of Science. A combination of controlled vocabulary, free-text words, and well-defined inclusion and exclusion criteria guided the search. Digital impression accuracy is at the same level as conventional impression methods in fabrication of crowns and short fixed dental prostheses (FDPs). For fabrication of implant-supported crowns and FDPs, digital impression accuracy is clinically acceptable. In full-arch impressions, conventional impression methods resulted in better accuracy compared to digital impressions. Digital impression techniques are a clinically acceptable alternative to conventional impression methods in fabrication of crowns and short FDPs. For fabrication of implant-supported crowns and FDPs, digital impression systems also result in clinically acceptable fit. Digital impression techniques are faster and can shorten the operation time. Based on this study, the conventional impression technique is still recommended for full-arch impressions. © 2016 by the American College of Prosthodontists.

Computer modeling the fatigue crack growth rate behavior of metals in corrosive environments

NASA Technical Reports Server (NTRS)

Richey, Edward, III; Wilson, Allen W.; Pope, Jonathan M.; Gangloff, Richard P.

1994-01-01

The objective of this task was to develop a method to digitize FCP (fatigue crack propagation) kinetics data, generally presented in terms of extensive da/dN-Delta K pairs, to produce a file for subsequent linear superposition or curve-fitting analysis. The method that was developed is specific to the Numonics 2400 Digitablet and is comparable to commercially available software products as Digimatic(sup TM 4). Experiments demonstrated that the errors introduced by the photocopying of literature data, and digitization, are small compared to those inherent in laboratory methods to characterize FCP in benign and aggressive environments. The digitizing procedure was employed to obtain fifteen crack growth rate data sets for several aerospace alloys in aggressive environments.

Management of digital eye strain.

PubMed

Coles-Brennan, Chantal; Sulley, Anna; Young, Graeme

2018-05-23

Digital eye strain, an emerging public health issue, is a condition characterised by visual disturbance and/or ocular discomfort related to the use of digital devices and resulting from a range of stresses on the ocular environment. This review aims to provide an overview of the extensive literature on digital eye strain research with particular reference to the clinical management of symptoms. As many as 90 per cent of digital device users experience symptoms of digital eye strain. Many studies suggest that the following factors are associated with digital eye strain: uncorrected refractive error (including presbyopia), accommodative and vergence anomalies, altered blinking pattern (reduced rate and incomplete blinking), excessive exposure to intense light, closer working distance, and smaller font size. Since a symptom may be caused by one or more factors, a holistic approach should be adopted. The following management strategies have been suggested: (i) appropriate correction of refractive error, including astigmatism and presbyopia; (ii) management of vergence anomalies, with the aim of inducing or leaving a small amount of heterophoria (~1.5 Δ Exo); (iii) blinking exercise/training to maintain normal blinking pattern; (iv) use of lubricating eye drops (artificial tears) to help alleviate dry eye-related symptoms; (v) contact lenses with enhanced comfort, particularly at end-of-day and in challenging environments; (vi) prescription of colour filters in all vision correction options, especially blue light-absorbing filters; and (vii) management of accommodative anomalies. Prevention is the main strategy for management of digital eye strain, which involves: (i) ensuring an ergonomic work environment and practice (through patient education and the implementation of ergonomic workplace policies); and (ii) visual examination and eye care to treat visual disorders. Special consideration is needed for people at a high risk of digital eye strain, such as computer workers and contact lens wearers. © 2018 Optometry Australia.

Basis for the implementation of digital signature in Argentine's health environment

NASA Astrophysics Data System (ADS)

Escobar, P. P.; Formica, M.

2007-11-01

The growth of telemedical applications and electronic transactions in health environments is paced by the constant technology evolution. This implies a big cultural change in traditional medicine and in hospital information systems' users which arrival is delayed, basically, by the lack of solid laws and a well defined role-based infrastructure. The use of digital signature as a mean of identification, authentication, confidentiality and non-repudiation is the most suitable tool for assuring the electronic transactions and patient's data protection. The implementation of a Public Key Infrastructure (PKI) in health environment allows for authentication, encryption and use of digital signature for assuring confidentiality and control of the movement of sensitive information. This work defines the minimum technological, legal and procedural basis for a successful PKI implementation and establishes the roles for the different actors in the chain of confidence in the public health environment of Argentine.

Digital Readiness Gaps

ERIC Educational Resources Information Center

Horrigan, John B.

2016-01-01

For many years concerns about "digital divides" centered primarily on whether people had "access" to digital technologies. Now, those worried about these issues also focus on the degree to which people succeed or struggle when they use technology to try to navigate their environments, solve problems, and make decisions. This…

A model for the distribution of watermarked digital content on mobile networks

NASA Astrophysics Data System (ADS)

Frattolillo, Franco; D'Onofrio, Salvatore

2006-10-01

Although digital watermarking can be considered one of the key technologies to implement the copyright protection of digital contents distributed on the Internet, most of the content distribution models based on watermarking protocols proposed in literature have been purposely designed for fixed networks and cannot be easily adapted to mobile networks. On the contrary, the use of mobile devices currently enables new types of services and business models, and this makes the development of new content distribution models for mobile environments strategic in the current scenario of the Internet. This paper presents and discusses a distribution model of watermarked digital contents for such environments able to achieve a trade-off between the needs of efficiency and security.

Exploring virtual reality technology and the Oculus Rift for the examination of digital pathology slides

PubMed Central

Farahani, Navid; Post, Robert; Duboy, Jon; Ahmed, Ishtiaque; Kolowitz, Brian J.; Krinchai, Teppituk; Monaco, Sara E.; Fine, Jeffrey L.; Hartman, Douglas J.; Pantanowitz, Liron

2016-01-01

Background: Digital slides obtained from whole slide imaging (WSI) platforms are typically viewed in two dimensions using desktop personal computer monitors or more recently on mobile devices. To the best of our knowledge, we are not aware of any studies viewing digital pathology slides in a virtual reality (VR) environment. VR technology enables users to be artificially immersed in and interact with a computer-simulated world. Oculus Rift is among the world's first consumer-targeted VR headsets, intended primarily for enhanced gaming. Our aim was to explore the use of the Oculus Rift for examining digital pathology slides in a VR environment. Methods: An Oculus Rift Development Kit 2 (DK2) was connected to a 64-bit computer running Virtual Desktop software. Glass slides from twenty randomly selected lymph node cases (ten with benign and ten malignant diagnoses) were digitized using a WSI scanner. Three pathologists reviewed these digital slides on a 27-inch 5K display and with the Oculus Rift after a 2-week washout period. Recorded endpoints included concordance of final diagnoses and time required to examine slides. The pathologists also rated their ease of navigation, image quality, and diagnostic confidence for both modalities. Results: There was 90% diagnostic concordance when reviewing WSI using a 5K display and Oculus Rift. The time required to examine digital pathology slides on the 5K display averaged 39 s (range 10–120 s), compared to 62 s with the Oculus Rift (range 15–270 s). All pathologists confirmed that digital pathology slides were easily viewable in a VR environment. The ratings for image quality and diagnostic confidence were higher when using the 5K display. Conclusion: Using the Oculus Rift DK2 to view and navigate pathology whole slide images in a virtual environment is feasible for diagnostic purposes. However, image resolution using the Oculus Rift device was limited. Interactive VR technologies such as the Oculus Rift are novel tools that may be of use in digital pathology. PMID:27217972

Cost-effective handling of digital medical images in the telemedicine environment.

PubMed

Choong, Miew Keen; Logeswaran, Rajasvaran; Bister, Michel

2007-09-01

This paper concentrates on strategies for less costly handling of medical images. Aspects of digitization using conventional digital cameras, lossy compression with good diagnostic quality, and visualization through less costly monitors are discussed. For digitization of film-based media, subjective evaluation of the suitability of digital cameras as an alternative to the digitizer was undertaken. To save on storage, bandwidth and transmission time, the acceptable degree of compression with diagnostically no loss of important data was studied through randomized double-blind tests of the subjective image quality when compression noise was kept lower than the inherent noise. A diagnostic experiment was undertaken to evaluate normal low cost computer monitors as viable viewing displays for clinicians. The results show that conventional digital camera images of X-ray images were diagnostically similar to the expensive digitizer. Lossy compression, when used moderately with the imaging noise to compression noise ratio (ICR) greater than four, can bring about image improvement with better diagnostic quality than the original image. Statistical analysis shows that there is no diagnostic difference between expensive high quality monitors and conventional computer monitors. The results presented show good potential in implementing the proposed strategies to promote widespread cost-effective telemedicine and digital medical environments. 2006 Elsevier Ireland Ltd

Authenticity techniques for PACS images and records

NASA Astrophysics Data System (ADS)

Wong, Stephen T. C.; Abundo, Marco; Huang, H. K.

1995-05-01

Along with the digital radiology environment supported by picture archiving and communication systems (PACS) comes a new problem: How to establish trust in multimedia medical data that exist only in the easily altered memory of a computer. Trust is characterized in terms of integrity and privacy of digital data. Two major self-enforcing techniques can be used to assure the authenticity of electronic images and text -- key-based cryptography and digital time stamping. Key-based cryptography associates the content of an image with the originator using one or two distinct keys and prevents alteration of the document by anyone other than the originator. A digital time stamping algorithm generates a characteristic `digital fingerprint' for the original document using a mathematical hash function, and checks that it has not been modified. This paper discusses these cryptographic algorithms and their appropriateness for a PACS environment. It also presents experimental results of cryptographic algorithms on several imaging modalities.

In-Factory Learning - Qualification For The Factory Of The Future

NASA Astrophysics Data System (ADS)

Quint, Fabian; Mura, Katharina; Gorecky, Dominic

2015-07-01

The Industry 4.0 vision anticipates that internet technologies will find their way into future factories replacing traditional components by dynamic and intelligent cyber-physical systems (CPS) that combine the physical objects with their digital representation. Reducing the gap between the real and digital world makes the factory environment more flexible, more adaptive, but also more complex for the human workers. Future workers require interdisciplinary competencies from engineering, information technology, and computer science in order to understand and manage the diverse interrelations between physical objects and their digital counterpart. This paper proposes a mixed-reality based learning environment, which combines physical objects and visualisation of digital content via Augmented Reality. It uses reality-based interaction in order to make the dynamic interrelations between real and digital factory visible and tangible. We argue that our learning system does not work as a stand-alone solution, but should fit into existing academic and advanced training curricula.

Navigate the Digital Rapids

ERIC Educational Resources Information Center

Lindsay, Julie; Davis, Vicki

2010-01-01

How can teachers teach digital citizenship when the digital landscape is changing so rapidly? How can teachers teach proper online social interactions when the students are outside their classroom and thus outside their control? Will encouraging students to engage in global collaborative environments land teachers in hot water? These are the…

Authenticity in a Digital Environment.

ERIC Educational Resources Information Center

Cullen, Charles T.; Hirtle, Peter B.; Levy, David; Lynch, Clifford A.; Rothenberg, Jeff

On January 24, 2000, the Council on Library and Information Resources (CLIR) convened a group of experts from different domains of the information resources community to address the question, "What is an authentic digital object?" Five writers--an archivist, a digital library expert, a documentary editor and special collections…

The Ethics of Digital Writing Research: A Rhetorical Approach

ERIC Educational Resources Information Center

McKee, Heidi; Porter, James E.

2008-01-01

The study of writers and writing in digital environments raises distinct and complex ethical issues for researchers. Rhetoric theory and casuistic ethics, working in tandem, provide a theoretical framework for addressing such issues. A casuistic heuristic grounded in rhetorical principles can help digital writing researchers critically…

Educating Digital Citizens

ERIC Educational Resources Information Center

Tan, Thomas

2011-01-01

Digital citizenship is how educators, citizens, and parents can teach where the lines of cyber safety and ethics are in the interconnected online world their students will inhabit. Aside from keeping technology users safe, digital citizenship also prepares students to survive and thrive in an environment embedded with information, communication,…

Learning to Read in the Digital Age

ERIC Educational Resources Information Center

Rose, David; Dalton, Bridget

2009-01-01

The digital age offers transformative opportunities for individualization of learning. First, modern imaging technologies have changed our understanding of learning and the sources and ranges of its diversity. Second, digital technologies make it possible to design learning environments that are responsive to individual differences. We draw on…

Developing Digital Portfolios for Childhood Education. Research Reports.

ERIC Educational Resources Information Center

Kankaanranta, Marja

This action research study developed, explored, and analyzed the use of digital portfolios as a multiperspective ecological assessment method in primary education learning environments in Finland. Participating in the study were kindergarten and primary school teachers who were challenged and encouraged to utilize networking and digital portfolios…

Flight test of a full authority Digital Electronic Engine Control system in an F-15 aircraft

NASA Technical Reports Server (NTRS)

Barrett, W. J.; Rembold, J. P.; Burcham, F. W.; Myers, L.

1981-01-01

The Digital Electronic Engine Control (DEEC) system considered is a relatively low cost digital full authority control system containing selectively redundant components and fault detection logic with capability for accommodating faults to various levels of operational capability. The DEEC digital control system is built around a 16-bit, 1.2 microsecond cycle time, CMOS microprocessor, microcomputer system with approximately 14 K of available memory. Attention is given to the control mode, component bench testing, closed loop bench testing, a failure mode and effects analysis, sea-level engine testing, simulated altitude engine testing, flight testing, the data system, cockpit, and real time display.

Digital Course Materials: A Case Study of the Apple iPad in the Academic Environment

ERIC Educational Resources Information Center

Cameron, Andrea H.; Bush, Michael H.

2011-01-01

The newness of the iPad device creates a phenomenon unique and unstudied in the academic environment. By merging the innovations of electronic text, e-reader, and multi-modal functionality, the iPad tablet device can act as an e-reader providing digital course materials as well as a range of other supplementary academic applications. This…

Designing and Evaluating Tutoring Feedback Strategies for Digital Learning Environments on the Basis of the Interactive Tutoring Feedback Model

ERIC Educational Resources Information Center

Narciss, Susanne

2013-01-01

This paper describes the interactive tutoring feedback model (ITF-model; Narciss, 2006; 2008), and how it can be applied to the design and evaluation of feedback strategies for digital learning environments. The ITF-model conceptualizes formative tutoring feedback as a multidimensional instructional activity that aims at contributing to the…

Instructional Suggestions Supporting Science Learning in Digital Environments Based on a Review of Eye-Tracking Studies

ERIC Educational Resources Information Center

Yang, Fang-Ying; Tsai, Meng-Jung; Chiou, Guo-Li; Lee, Silvia Wen-Yu; Chang, Cheng-Chieh; Chen, Li-Ling

2018-01-01

The main purpose of this study was to provide instructional suggestions for supporting science learning in digital environments based on a review of eye tracking studies in e-learning related areas. Thirty-three eye-tracking studies from 2005 to 2014 were selected from the Social Science Citation Index (SSCI) database for review. Through a…

Learning Extrema Problems Using a Non-Differential Approach in a Digital Dynamic Environment: The Case of High-Track yet Low-Achievers

ERIC Educational Resources Information Center

Dvir, Assaf; Tabach, Michal

2017-01-01

High schools commonly use a differential approach to teach minima and maxima geometric problems. Although calculus serves as a systematic and powerful technique, this rigorous instrument might hinder students' ability to understand the behavior and constraints of the objective function. The proliferation of digital environments allowed us to adopt…

In Search of Design Principles for Developing Digital Learning and Performance Support for a Student Design Task

ERIC Educational Resources Information Center

Bollen, Lars; van der Meij, Hans; Leemkuil, Henny; McKenney, Susan

2015-01-01

A digital learning and performance support environment for university student design tasks was developed. This paper describes on the design rationale, process, and the usage results to arrive at a core set of design principles for the construction of such an environment. We present a collection of organizational, technical, and course-related…

Evaluating the Efficacy of Using a Digital Reading Environment to Improve Reading Comprehension within a Reading Clinic

ERIC Educational Resources Information Center

Ortlieb, Evan; Sargent, Stephan; Moreland, Meagan

2014-01-01

This study examined the effectiveness of using the online digital reading environment to increase elementary students' comprehension within a reading clinic. Preservice teachers at a four-year university in the Midwest worked one-on-one with 58 fourth-grade students from three schools who were assigned to one of three conditions: print-based text…

The Effect of a Digital Learning Environment on Children's Conceptions about the Protection of Endemic Plants

ERIC Educational Resources Information Center

Petrou, Stella; Korfiatis, Konstantinos

2013-01-01

This study presents the results of a pilot learning intervention for improving children's ideas about plant protection. The research was executed in two phases. The first phase aimed at exploring children's ideas about plant protection. These ideas were taken into account for the design and development of a digital learning environment. The second…

Formulation of a strategy for monitoring control integrity in critical digital control systems

NASA Technical Reports Server (NTRS)

Belcastro, Celeste M.; Fischl, Robert; Kam, Moshe

1991-01-01

Advanced aircraft will require flight critical computer systems for stability augmentation as well as guidance and control that must perform reliably in adverse, as well as nominal, operating environments. Digital system upset is a functional error mode that can occur in electromagnetically harsh environments, involves no component damage, can occur simultaneously in all channels of a redundant control computer, and is software dependent. A strategy is presented for dynamic upset detection to be used in the evaluation of critical digital controllers during the design and/or validation phases of development. Critical controllers must be able to be used in adverse environments that result from disturbances caused by an electromagnetic source such as lightning, high intensity radiated field (HIRF), and nuclear electromagnetic pulses (NEMP). The upset detection strategy presented provides dynamic monitoring of a given control computer for degraded functional integrity that can result from redundancy management errors and control command calculation error that could occur in an electromagnetically harsh operating environment. The use is discussed of Kalman filtering, data fusion, and decision theory in monitoring a given digital controller for control calculation errors, redundancy management errors, and control effectiveness.

Highly linear, sensitive analog-to-digital converter

NASA Technical Reports Server (NTRS)

Cox, J.; Finley, W. R.

1969-01-01

Analog-to-digital converter converts 10 volt full scale input signal into 13 bit digital output. Advantages include high sensitivity, linearity, low quantitizing error, high resistance to mechanical shock and vibration loads, and temporary data storage capabilities.

Examining unusual digit span performance in a population of postsecondary students assessed for academic difficulties.

PubMed

Harrison, Allyson G; Rosenblum, Yoni; Currie, Shannon

2010-09-01

Methods of identifying poor test-related motivation using the Wechsler Adult Intelligence Scale Digit Span subtest are based on identification of performance patterns that are implausible if the test taker is investing full effort. No studies to date, however, have examined the specificity of such measures, particularly when evaluating persons with either known or suspected learning or attention disorders. This study investigated performance of academically challenged students on three measures embedded in the Wechsler Adult Intelligence Scale-III, namely, low Digit Span, high Vocabulary-Digit span (Voc-DS), and low Reliable Digit Span scores. Evaluating subjects believed to be investing full effort in testing, it was found that both Digit Span and Reliable Digit Span had high specificity, although both showed relatively lower sensitivity. In contrast, VOC-DS was especially weak in both sensitivity and specificity, with an apparent false positive rate of 28%. Use of VOC-DS is therefore not appropriate for those with a history of learning or attention problems.

Design and Testing of an Active Heat Rejection Radiator with Digital Turn-Down Capability

NASA Technical Reports Server (NTRS)

Sunada, Eric; Birur, Gajanana C.; Ganapathi, Gani B.; Miller, Jennifer; Berisford, Daniel; Stephan, Ryan

2010-01-01

NASA's proposed lunar lander, Altair, will be exposed to vastly different external environment temperatures. The challenges to the active thermal control system (ATCS) are compounded by unfavorable transients in the internal waste heat dissipation profile: the lowest heat load occurs in the coldest environment while peak loads coincide with the warmest environment. The current baseline for this fluid is a 50/50 inhibited propylene glycol/water mixture with a freeze temperature around -35 C. While the overall size of the radiator's heat rejection area is dictated by the worst case hot scenario, a turn-down feature is necessary to tolerate the worst case cold scenario. A radiator with digital turn-down capability is being designed as a robust means to maintain cabin environment and equipment temperatures while minimizing mass and power consumption. It utilizes active valving to isolate and render ineffective any number of parallel flow tubes which span across the ATCS radiator. Several options were assessed in a trade-study to accommodate flow tube isolation and how to deal with the stagnant fluid that would otherwise remain in the tube. Bread-board environmental tests were conducted for options to drain the fluid from a turned-down leg as well an option to allow a leg to freeze/thaw. Each drain option involved a positive displacement gear pump with different methods of providing a pressure head to feed it. Test results showed that a start-up heater used to generate vapor at the tube inlet held the most promise for tube evacuation. Based on these test results and conclusions drawn from the trade-study, a full-scale radiator design is being worked for the Altair mission profile.

Determinants of Preferred Financial Digital Format by New Zealand Accounting Practitioners

ERIC Educational Resources Information Center

Ghani, Erlane K.; Jusoff, Kamaruzaman

2009-01-01

An extensive literature has emerged in the past decade that examined financial reporting in a digital environment. This study extends this literature by examining the factors that may influence the preference of a digital presentation format. Using questionnaire design, this study examines whether public accounting practitioners' work experience…

Bits and Pieces--Copyright Law and Australian Libraries in 1997.

ERIC Educational Resources Information Center

Herd, Annabelle

1997-01-01

Discusses issues in Australian libraries related to copyright in the digital environment. Examines what constitutes a digital copy; exceptions/limitations; the extent of liability of those who communicate/transmit digital copyright-protected works; how uses of material can be monitored/controlled; and the process of copyright reform in Australia…

Reaching Digital Natives on Their Terms

ERIC Educational Resources Information Center

Dessoff, Alan

2010-01-01

From replacing print textbooks with digital content created by teachers or gathered from outside sources to encouraging students to explore the world around them digitally, many districts are creating a new type of student-friendly teaching and learning environment that goes beyond just adding computers to classrooms. Through a wide range of…

Digital Media and Learning

ERIC Educational Resources Information Center

John D. and Catherine T. MacArthur Foundation, 2012

2012-01-01

MacArthur launched the digital media and learning initiative in 2006 to explore how digital media are changing the way young people learn, socialize, communicate, and play. Since 2006, the Foundation has awarded grants totaling more than $100 million for research, development of innovative new technologies, new learning environments for youth,…

Learning the Virtual Life: Public Pedagogy in a Digital World

ERIC Educational Resources Information Center

Trifonas, Peter Pericles, Ed.

2011-01-01

Digital technologies have transformed cultural perceptions of learning and what it means to be literate, expanding the importance of experience alongside interpretation and reflection. "Living the Virtual Life" offers ways to consider the local and global effects of digital media on educational environments, as well as the cultural transformations…

Community Stories and Institutional Stewardship: Digital Curation's Dual Roles of Story Creation and Resource Preservation

ERIC Educational Resources Information Center

Kunda, Sue; Anderson-Wilk, Mark

2011-01-01

Our institutions of record are facing a new digital knowledge management challenge: stakeholder communities are now expecting customized Web interfaces to institutional knowledge repositories, online environments where community members can contribute content and see themselves represented, as well as access archived resources. Digital curation…

Developing Historic Building Information Modelling Guidelines and Procedures for Architectural Heritage in Ireland

NASA Astrophysics Data System (ADS)

Murphy, M.; Corns, A.; Cahill, J.; Eliashvili, K.; Chenau, A.; Pybus, C.; Shaw, R.; Devlin, G.; Deevy, A.; Truong-Hong, L.

2017-08-01

Cultural heritage researchers have recently begun applying Building Information Modelling (BIM) to historic buildings. The model is comprised of intelligent objects with semantic attributes which represent the elements of a building structure and are organised within a 3D virtual environment. Case studies in Ireland are used to test and develop the suitable systems for (a) data capture/digital surveying/processing (b) developing library of architectural components and (c) mapping these architectural components onto the laser scan or digital survey to relate the intelligent virtual representation of a historic structure (HBIM). While BIM platforms have the potential to create a virtual and intelligent representation of a building, its full exploitation and use is restricted to narrow set of expert users with access to costly hardware, software and skills. The testing of open BIM approaches in particular IFCs and the use of game engine platforms is a fundamental component for developing much wider dissemination. The semantically enriched model can be transferred into a WEB based game engine platform.

The complete digital workflow in fixed prosthodontics: a systematic review.

PubMed

Joda, Tim; Zarone, Fernando; Ferrari, Marco

2017-09-19

The continuous development in dental processing ensures new opportunities in the field of fixed prosthodontics in a complete virtual environment without any physical model situations. The aim was to compare fully digitalized workflows to conventional and/or mixed analog-digital workflows for the treatment with tooth-borne or implant-supported fixed reconstructions. A PICO strategy was executed using an electronic (MEDLINE, EMBASE, Google Scholar) plus manual search up to 2016-09-16 focusing on RCTs investigating complete digital workflows in fixed prosthodontics with regard to economics or esthetics or patient-centered outcomes with or without follow-up or survival/success rate analysis as well as complication assessment of at least 1 year under function. The search strategy was assembled from MeSH-Terms and unspecific free-text words: {(("Dental Prosthesis" [MeSH]) OR ("Crowns" [MeSH]) OR ("Dental Prosthesis, Implant-Supported" [MeSH])) OR ((crown) OR (fixed dental prosthesis) OR (fixed reconstruction) OR (dental bridge) OR (implant crown) OR (implant prosthesis) OR (implant restoration) OR (implant reconstruction))} AND {("Computer-Aided Design" [MeSH]) OR ((digital workflow) OR (digital technology) OR (computerized dentistry) OR (intraoral scan) OR (digital impression) OR (scanbody) OR (virtual design) OR (digital design) OR (cad/cam) OR (rapid prototyping) OR (monolithic) OR (full-contour))} AND {("Dental Technology" [MeSH) OR ((conventional workflow) OR (lost-wax-technique) OR (porcelain-fused-to-metal) OR (PFM) OR (implant impression) OR (hand-layering) OR (veneering) OR (framework))} AND {(("Study, Feasibility" [MeSH]) OR ("Survival" [MeSH]) OR ("Success" [MeSH]) OR ("Economics" [MeSH]) OR ("Costs, Cost Analysis" [MeSH]) OR ("Esthetics, Dental" [MeSH]) OR ("Patient Satisfaction" [MeSH])) OR ((feasibility) OR (efficiency) OR (patient-centered outcome))}. Assessment of risk of bias in selected studies was done at a 'trial level' including random sequence generation, allocation concealment, blinding, completeness of outcome data, selective reporting, and other bias using the Cochrane Collaboration tool. A judgment of risk of bias was assigned if one or more key domains had a high or unclear risk of bias. An official registration of the systematic review was not performed. The systematic search identified 67 titles, 32 abstracts thereof were screened, and subsequently, three full-texts included for data extraction. Analysed RCTs were heterogeneous without follow-up. One study demonstrated that fully digitally produced dental crowns revealed the feasibility of the process itself; however, the marginal precision was lower for lithium disilicate (LS2) restorations (113.8 μm) compared to conventional metal-ceramic (92.4 μm) and zirconium dioxide (ZrO2) crowns (68.5 μm) (p < 0.05). Another study showed that leucite-reinforced glass ceramic crowns were esthetically favoured by the patients (8/2 crowns) and clinicians (7/3 crowns) (p < 0.05). The third study investigated implant crowns. The complete digital workflow was more than twofold faster (75.3 min) in comparison to the mixed analog-digital workflow (156.6 min) (p < 0.05). No RCTs could be found investigating multi-unit fixed dental prostheses (FDP). The number of RCTs testing complete digital workflows in fixed prosthodontics is low. Scientifically proven recommendations for clinical routine cannot be given at this time. Research with high-quality trials seems to be slower than the industrial progress of available digital applications. Future research with well-designed RCTs including follow-up observation is compellingly necessary in the field of complete digital processing.

Digit ratio predicts sense of direction in women.

PubMed

Chai, Xiaoqian J; Jacobs, Lucia F

2012-01-01

The relative length of the second-to-fourth digits (2D:4D) has been linked with prenatal androgen in humans. The 2D:4D is sexually dimorphic, with lower values in males than females, and appears to correlate with diverse measures of behavior. However, the relationship between digit ratio and cognition, and spatial cognition in particular, has produced mixed results. In the present study, we hypothesized that spatial tasks separating cue conditions that either favored female or male strategies would examine this structure-function correlation with greater precision. Previous work suggests that males are better in the use of directional cues than females. In the present study, participants learned a target location in a virtual landscape environment, in conditions that contained either all directional (i.e., distant or compass bearing) cues, or all positional (i.e., local, small objects) cues. After a short delay, participants navigated back to the target location from a novel starting location. Males had higher accuracy in initial search direction than females in environments with all directional cues. Lower digit ratio was correlated with higher accuracy of initial search direction in females in environments with all directional cues. Mental rotation scores did not correlate with digit ratio in either males or females. These results demonstrate for the first time that a sex difference in the use of directional cues, i.e., the sense of direction, is associated with more male-like digit ratio.

Usage of a Digital Health Workplace Intervention Based on Socioeconomic Environment and Race: Retrospective Secondary Cross-Sectional Study.

PubMed

Senecal, Conor; Widmer, R Jay; Bailey, Kent; Lerman, Lilach O; Lerman, Amir

2018-04-23

Digital health tools have been associated with improvement of cardiovascular disease (CVD) risk factors and outcomes; however, the differential use of these technologies among various ethnic and economic classes is not well known. To identify the effect of socioeconomic environment on usage of a digital health intervention. A retrospective secondary cross-sectional analysis of a workplace digital health tool use, in association with a change in intermediate markers of CVD, was undertaken over the course of one year in 26,188 participants in a work health program across 81 organizations in 42 American states between 2011 and 2014. Baseline demographic data for participants included age, sex, race, home zip code, weight, height, blood pressure, glucose, lipids, and hemoglobin A 1c . Follow-up data was then obtained in 90-day increments for up to one year. Using publicly available data from the American Community Survey, we obtained the median income for each zip code as a marker for socioeconomic status via median household income. Digital health intervention usage was analyzed based on socioeconomic status as well as age, gender, and race. The cohort was found to represent a wide sample of socioeconomic environments from a median income of US $11,000 to $171,000. As a whole, doubling of income was associated with 7.6% increase in log-in frequency. However, there were marked differences between races. Black participants showed a 40.5% increase and Hispanic participants showed a 57.8% increase in use with a doubling of income, compared to 3% for Caucasian participants. The current study demonstrated that socioeconomic data confirms no relevant relationship between socioeconomic environment and digital health intervention usage for Caucasian users. However, a strong relationship is present for black and Hispanic users. Thus, socioeconomic environment plays a prominent role only in minority groups that represent a high-risk group for CVD. This finding identifies a need for digital health apps that are effective in these high-risk groups. ©Conor Senecal, R Jay Widmer, Kent Bailey, Lilach O Lerman, Amir Lerman. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 23.04.2018.

[Digital learning and teaching in medical education : Already there or still at the beginning?

PubMed

Kuhn, Sebastian; Frankenhauser, Susanne; Tolks, Daniel

2018-02-01

The current choice of digital teaching and learning formats in medicine is very heterogeneous. In addition to the widely used classical static formats, social communication tools, audio/video-based media, interactive formats, and electronic testing systems enrich the learning environment.For medical students, the private use of digital media is not necessarily linked to their meaningful use in the study. Many gain their experience of digital learning in the sense of "assessment drives learning", especially by taking online exams in a passive, consuming role. About half of all medical students can be referred to as "e-examinees" whose handling of digital learning is primarily focused on online exam preparation. Essentially, they do not actively influence their digital environment. Only a quarter can be identified as a "digital all-rounder", who compiles their individual learning portfolio from the broad range of digital media.At present, the use of digital media is not yet an integral and comprehensive component of the teaching framework of medical studies in Germany, but is rather used in the sense of a punctual teaching enrichment. Current trends in digital teaching and learning offerings are mobile, interactive, and personalized platforms as well as increasing the relevance of learning platforms. Furthermore, didactical concepts targeting the changed learning habits of the students are more successful regarding the acceptance and learning outcomes. In addition, digitalization is currently gaining importance as a component in the medical school curricula.

Discussion on the management system technology implementation of multimedia classrooms in the digital campus

NASA Astrophysics Data System (ADS)

Wang, Bo

2018-04-01

Based on the digitized information and network, digital campus is an integration of teaching, management, science and research, life service and technology service, and it is one of the current mainstream construction form of campus function. This paper regarded the "mobile computing" core digital environment construction development as the background, explored the multiple management system technology content design and achievement of multimedia classrooms in digital campus and scientifically proved the technology superiority of management system.

Digital video applications in radiologic education: theory, technique, and applications.

PubMed

Hennessey, J G; Fishman, E K; Ney, D R

1994-05-01

Computer-assisted instruction (CAI) has great potential in medical education. The recent explosion of multimedia platforms provides an environment for the seemless integration of text, images, and sound into a single program. This article discusses the role of digital video in the current educational environment as well as its future potential. An indepth review of the technical decisions of this new technology is also presented.

Full 3-dimensional digital workflow for multicomponent dental appliances: A proof of concept.

PubMed

van der Meer, W Joerd; Vissink, Arjan; Ren, Yijin

2016-04-01

The authors used a 3-dimensional (3D) printer and a bending robot to produce a multicomponent dental appliance to assess whether 3D digital models of the dentition are applicable for a full digital workflow. The authors scanned a volunteer's dentition with an intraoral scanner (Lava Chairside Oral Scanner C.O.S., 3M). A digital impression was used to design 2 multicomponent orthodontic appliances. Biocompatible acrylic baseplates were produced with the aid of a 3D printer. The metal springs and clasps were produced by a bending robot. The fit of the 2 appliances was assessed by 2 experienced orthodontists. The authors assessed both orthodontic appliances with the volunteer's dentition and found the fit to be excellent. Clinicians can fully produce a multicomponent dental appliance consisting of both an acrylic baseplate and other parts, such as clasps, springs, or screws, using a digital workflow process without the need for a physical model of the patient's dentition. Plaster models can be superfluous for orthodontic treatment as digital models can be used in all phases of a full digital workflow in orthodontics. The arduous task of making a multicomponent dental appliance that involves bending wires can possibly be replaced by a computer, design software, a 3D printer, and a bending robot. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

Cognitive engineering of film library transition from film medium to digital environment in a Texas teaching hospital.

PubMed

Koperwhats, Martha A; Chang, Wei-Chih; Xiao, Jianguo

2002-01-01

Digital imaging technology promises efficient, economical, and fast service for patient care, but the challenges are great in the transition from film to a filmless (digital) environment. This change has a significant impact on the film library's personnel (film librarians) who play a leading roles in storage, classification, and retrieval of images. The objectives of this project were to study film library errors and the usability of a physical computerized system that could not be changed, while developing an intervention to reduce errors and test the usability of the intervention. Cognitive and human factors analysis were used to evaluate human-computer interaction. A workflow analysis was performed to understand the film and digital imaging processes. User and task analyses were applied to account for all behaviors involved in interaction with the system. A heuristic evaluation was used to probe the usability issues in the picture archiving and communication systems (PACS) modules. Simplified paper-based instructions were designed to familiarize the film librarians with the digital system. A usability survey evaluated the effectiveness of the instruction. The user and task analyses indicated that different users faced challenges based on their computer literacy, education, roles, and frequency of use of diagnostic imaging. The workflow analysis showed that the approaches to using the digital library differ among the various departments. The heuristic evaluation of the PACS modules showed the human-computer interface to have usability issues that prevented easy operation. Simplified instructions were designed for operation of the modules. Usability surveys conducted before and after revision of the instructions showed that performance improved. Cognitive and human factor analysis can help film librarians and other users adapt to the filmless system. Use of cognitive science tools will aid in successful transition of the film library from a film environment to a digital environment.

75 FR 20518 - Special Conditions: Cirrus Design Corporation Model SF50 Airplane; Full Authority Digital Engine...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-20

...; Special Conditions No. 23-246-SC] Special Conditions: Cirrus Design Corporation Model SF50 Airplane; Full Authority Digital Engine Control (FADEC) System AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... Cirrus Design Corporation model SF50 airplane. This airplane will have a novel or unusual design feature...

Enhancing the Reuse of Digital Resources for Integrated Systems to Represent, Understand and Dynamize Complex Interactions in Architectural Cultural Heritage Environments

NASA Astrophysics Data System (ADS)

Delgado, F. J.; Martinez, R.; Finat, J.; Martinez, J.; Puche, J. C.; Finat, F. J.

2013-07-01

In this work we develop a multiply interconnected system which involves objects, agents and interactions between them from the use of ICT applied to open repositories, users communities and web services. Our approach is applied to Architectural Cultural Heritage Environments (ACHE). It includes components relative to digital accessibility (to augmented ACHE repositories), contents management (ontologies for the semantic web), semiautomatic recognition (to ease the reuse of materials) and serious videogames (for interaction in urban environments). Their combination provides a support for local real/remote virtual tourism (including some tools for low-level RT display of rendering in portable devices), mobile-based smart interactions (with a special regard to monitored environments) and CH related games (as extended web services). Main contributions to AR models on usual GIS applied to architectural environments, concern to an interactive support performed directly on digital files which allows to access to CH contents which are referred to GIS of urban districts (involving facades, historical or preindustrial buildings) and/or CH repositories in a ludic and transversal way to acquire cognitive, medial and social abilities in collaborative environments.

Web-Based Virtual Microscopy of Digitized Blood Slides for Malaria Diagnosis: An Effective Tool for Skills Assessment in Different Countries and Environments.

PubMed

Ahmed, Laura; Seal, Leonard H; Ainley, Carol; De la Salle, Barbara; Brereton, Michelle; Hyde, Keith; Burthem, John; Gilmore, William Samuel

2016-08-11

Morphological examination of blood films remains the reference standard for malaria diagnosis. Supporting the skills required to make an accurate morphological diagnosis is therefore essential. However, providing support across different countries and environments is a substantial challenge. This paper reports a scheme supplying digital slides of malaria-infected blood within an Internet-based virtual microscope environment to users with different access to training and computing facilities. The feasibility of the approach was established, allowing users to test, record, and compare their own performance with that of other users. From Giemsa stained thick and thin blood films, 56 large high-resolution digital slides were prepared, using high-quality image capture and 63x oil-immersion objective lens. The individual images were combined using the photomerge function of Adobe Photoshop and then adjusted to ensure resolution and reproduction of essential diagnostic features. Web delivery employed the Digital Slidebox platform allowing digital microscope viewing facilities and image annotation with data gathering from participants. Engagement was high with images viewed by 38 participants in five countries in a range of environments and a mean completion rate of 42/56 cases. The rate of parasite detection was 78% and accuracy of species identification was 53%, which was comparable with results of similar studies using glass slides. Data collection allowed users to compare performance with other users over time or for each individual case. Overall, these results demonstrate that users worldwide can effectively engage with the system in a range of environments, with the potential to enhance personal performance through education, external quality assessment, and personal professional development, especially in regions where educational resources are difficult to access.

Information Activities and Appropriation in Teacher Trainees' Digital, Group-Based Learning

ERIC Educational Resources Information Center

Hanell, Fredrik

2016-01-01

Introduction: This paper reports results from an ethnographic study of teacher trainees' information activities in digital, group-based learning and their relation to the interplay between use and appropriation of digital tools and the learning environment. Method: The participants in the present study are 249 pre-school teacher trainees in…

Tracking a Head-Mounted Display in a Room-Sized Environment with Head-Mounted Cameras

DTIC Science & Technology

1990-04-01

poor resolution and a very limited working volume [Wan90]. 4 OPTOTRAK [Nor88] uses one camera with two dual-axis CCD infrared position sensors. Each...Nor88] Northern Digital. Trade literature on Optotrak - Northern Digital’s Three Dimensional Optical Motion Tracking and Analysis System. Northern Digital

Prospects for Digital Campus with Extensive Applications of Virtual Collaborative Space

ERIC Educational Resources Information Center

Nishide, Ryo

2011-01-01

This paper proposes extensive applications of virtual collaborative space in order to enhance the efficiency and capability of Digital Campus. The usability of Digital Campus has been experimented in different learning environments and evaluated by questionnaire as that the presence technology and a sense of solidarity influence the participants'…

Digital Literacies of the Cybergirl

ERIC Educational Resources Information Center

Thomas, Angela

2004-01-01

This article explores the nexus between digital literacies and identity in the online graphical chat environment of the "palace". With a focus on the adolescent cybergirl, it examines how girls use words and images to create a digital presence, and in so doing, "write" their bodies and their selves. I discuss how the cybergirl is discursively…

Teachers Teaching in the New Mediascape: Digital Immigrants or "Natural Born Cyborgs"?

ERIC Educational Resources Information Center

Adams, Catherine A.; Pente, Patti

2011-01-01

Schooled in an earlier time, educators are laboring to find meaningful purchase in new media environments, unable to match the fluency and sophistication of their "digital native" students. Yet is Marc Prensky's portrayal of teachers as "digital immigrants" really an accurate rendering of the today's situation? Drawing on phenomenological and…

Digital Video for Fostering Self-Reflection in an ePortfolio Environment

ERIC Educational Resources Information Center

Cheng, Gary; Chau, Juliana

2009-01-01

The ability to self-reflect is widely recognized as a desirable learner attribute that can induce deep learning. Advances in computer-mediated communication technologies have led to intense interest in higher education in exploring the potential of digital tools, particularly digital video, for fostering self-reflection. While there are reports…

Digital Media Education and Advocacy: Addressing Attitudes toward Disability on College Campuses

ERIC Educational Resources Information Center

Hartley, Michael T.; Mapes, Aimee C.; Taylor, Aryn; Bourgeois, Paul J.

2016-01-01

As digital information becomes the preferred mode of communication, media applications have become an emerging context to address attitudes toward disability. This practice brief details digital media as one method to critically frame ableism on college campuses, promoting a more inclusive campus environment. Coordinated by the disability service…

How to Chat in English and Chinese: Emerging Digital Language Conventions

ERIC Educational Resources Information Center

Lotherington, Heather; Xu, Yejun

2004-01-01

Rapid changes in language form and function occurring in digital environments present teachers and students of second languages alike with conundrums as to language and discourse standards. Factors affecting the changes that are emerging in digital English include the spatial and temporal possibilities and constraints of the medium, digital…

Digital Enlightenment: The Myth of the Disappearing Teacher

ERIC Educational Resources Information Center

Longman, David; Green, Kerie

2011-01-01

This paper argues that the emerging post-print digital culture of knowledge creation and dissemination in higher education is even more demanding of effective and committed teaching than hitherto. This may run counter to a widespread view that the digital environment reduces the need for a strong culture of teaching, to be replaced by an…

Cooperative Development of the Digital Library: Identifying and Working with Potential Partners.

ERIC Educational Resources Information Center

Poland, Jean

In a university environment, the library can benefit from interest in the digital future on the part of other concerned groups. Computer science departments are natural partners in the development of digital libraries. Professional societies, for-profit companies, and foundations are also potential sources of support. Cornell University Library…

The average direct current offset values for small digital audio recorders in an acoustically consistent environment.

PubMed

Koenig, Bruce E; Lacey, Douglas S

2014-07-01

In this research project, nine small digital audio recorders were tested using five sets of 30-min recordings at all available recording modes, with consistent audio material, identical source and microphone locations, and identical acoustic environments. The averaged direct current (DC) offset values and standard deviations were measured for 30-sec and 1-, 2-, 3-, 6-, 10-, 15-, and 30-min segments. The research found an inverse association between segment lengths and the standard deviation values and that lengths beyond 30 min may not meaningfully reduce the standard deviation values. This research supports previous studies indicating that measured averaged DC offsets should only be used for exclusionary purposes in authenticity analyses and exhibit consistent values when the general acoustic environment and microphone/recorder configurations were held constant. Measured average DC offset values from exemplar recorders may not be directly comparable to those of submitted digital audio recordings without exactly duplicating the acoustic environment and microphone/recorder configurations. © 2014 American Academy of Forensic Sciences.

Virtual reality and interactive digital game technology: new tools to address obesity and diabetes.

PubMed

Skip Rizzo, Albert; Lange, Belinda; Suma, Evan A; Bolas, Mark

2011-03-01

The convergence of the exponential advances in virtual reality (VR)-enabling technologies with a growing body of clinical research and experience has fueled the evolution of the discipline of clinical VR. This article begins with a brief overview of methods for producing and delivering VR environments that can be accessed by users for a range of clinical health conditions. Interactive digital games and new forms of natural movement-based interface devices are also discussed in the context of the emerging area of exergaming, along with some of the early results from studies of energy expenditure during the use of these systems. While these results suggest that playing currently available active exergames uses significantly more energy than sedentary activities and is equivalent to a brisk walk, these activities do not reach the level of intensity that would match playing the actual sport, nor do they deliver the recommended daily amount of exercise for children. However, these results provide some support for the use of digital exergames using the current state of technology as a complement to, rather than a replacement, for regular exercise. This may change in the future as new advances in novel full-body interaction systems for providing vigorous interaction with digital games are expected to drive the creation of engaging, low-cost interactive game-based applications designed to increase exercise participation in persons at risk for obesity. © 2011 Diabetes Technology Society.

F-15 digital electronic engine control system description

NASA Technical Reports Server (NTRS)

Myers, L. P.

1984-01-01

A digital electronic engine control (DEEC) was developed for use on the F100-PW-100 turbofan engine. This control system has full authority control, capable of moving all the controlled variables over their full ranges. The digital computational electronics and fault detection and accomodation logic maintains safe engine operation. A hydromechanical backup control (BUC) is an integral part of the fuel metering unit and provides gas generator control at a reduced performance level in the event of an electronics failure. The DEEC's features, hardware, and major logic diagrams are described.

Description and performance of a digital mobile satellite terminal

NASA Technical Reports Server (NTRS)

Lay, N.; Jedrey, T.; Parkyn, J.; Divsalar, D.

1990-01-01

A major goal of the Mobile Satellite Experiment (MSAT-X) program at the Jet Propulsion Lab (JPL) is the development of an advanced digital terminal for use in land mobile satellite communication. The terminal has been developed to minimize the risk of applying advanced technologies to future commercial mobile satellite systems (MSS). Testing with existing L band satellites was performed in fixed, land mobile and aeronautical mobile environments. JPL's development and tests of its mobile terminal have demonstrated the viability of narrowband digital voice communications in a land mobile environment through geostationary satellites. This paper provides a consolidated description of the terminal architecture and the performance of its individual elements.

VHDL Modeling and Simulation of a Digital Image Synthesizer for Countering ISAR

DTIC Science & Technology

2003-06-01

This thesis discusses VHDL modeling and simulation of a full custom Application Specific Integrated Circuit (ASIC) for a Digital Image Synthesizer...necessary for a given application . With such a digital method, it is possible for a small ship to appear as large as an aircraft carrier or any high...INTRODUCTION TO DIGITAL IMAGE SYNTHESIZER (DIS) A. BACKGROUND The Digital Image Synthesizer (DIS) is an Application Specific Integrated Circuit

Digital Image Correlation Techniques Applied to Large Scale Rocket Engine Testing

NASA Technical Reports Server (NTRS)

Gradl, Paul R.

2016-01-01

Rocket engine hot-fire ground testing is necessary to understand component performance, reliability and engine system interactions during development. The J-2X upper stage engine completed a series of developmental hot-fire tests that derived performance of the engine and components, validated analytical models and provided the necessary data to identify where design changes, process improvements and technology development were needed. The J-2X development engines were heavily instrumented to provide the data necessary to support these activities which enabled the team to investigate any anomalies experienced during the test program. This paper describes the development of an optical digital image correlation technique to augment the data provided by traditional strain gauges which are prone to debonding at elevated temperatures and limited to localized measurements. The feasibility of this optical measurement system was demonstrated during full scale hot-fire testing of J-2X, during which a digital image correlation system, incorporating a pair of high speed cameras to measure three-dimensional, real-time displacements and strains was installed and operated under the extreme environments present on the test stand. The camera and facility setup, pre-test calibrations, data collection, hot-fire test data collection and post-test analysis and results are presented in this paper.

Digitization of Electrocardiogram From Telemetry Prior to In-hospital Cardiac Arrest: A Pilot Study.

PubMed

Attin, Mina; Wang, Lu; Soroushmehr, S M Reza; Lin, Chii-Dean; Lemus, Hector; Spadafore, Maxwell; Najarian, Kayvan

2016-03-01

Analyzing telemetry electrocardiogram (ECG) data over an extended period is often time-consuming because digital records are not widely available at hospitals. Investigating trends and patterns in the ECG data could lead to establishing predictors that would shorten response time to in-hospital cardiac arrest (I-HCA). This study was conducted to validate a novel method of digitizing paper ECG tracings from telemetry systems in order to facilitate the use of heart rate as a diagnostic feature prior to I-HCA. This multicenter study used telemetry to investigate full-disclosure ECG papers of 44 cardiovascular patients obtained within 1 hr of I-HCA with initial rhythms of pulseless electrical activity and asystole. Digital ECGs were available for seven of these patients. An algorithm to digitize the full-disclosure ECG papers was developed using the shortest path method. The heart rate was measured manually (averaging R-R intervals) for ECG papers and automatically for digitized and digital ECGs. Significant correlations were found between manual and automated measurements of digitized ECGs (p < .001) and between digitized and digital ECGs (p < .001). Bland-Altman methods showed bias = .001 s, SD = .0276 s, lower and upper 95% limits of agreement for digitized and digital ECGs = .055 and -.053 s, and percentage error = 0.22%. Root mean square (rms), percentage rms difference, and signal to noise ratio values were in acceptable ranges. The digitization method was validated. Digitized ECG provides an efficient and accurate way of measuring heart rate over an extended period of time. © The Author(s) 2015.

Long-Range Atmosphere-Ocean Forecasting in Support of Undersea Warfare Operations in the Western North Pacific

DTIC Science & Technology

2009-09-01

Forecasts ECS East China Sea ESRL Earth Systems Research Laboratory FA False alarm FARate False alarm rate xviii GDEM Generalized Digital...uses a LTM based, global ocean climatology database called Generalized Digital Environment Model ( GDEM ), in tactical decision aid (TDA) software, such...environment for USW planning. GDEM climatology is derived using temperature and salinity profiles from the Modular Ocean Data Assimilation System

When New Media Meet the Strong Web of Connected Learning Environments: A New Vision of Progressive Education in the Digital Age

ERIC Educational Resources Information Center

Nam, Chaebong

2013-01-01

This paper shows how the legacy of Jane Addams' socialized education can live on in today's progressive education, especially in the digital age. Discussion is drawn from a case study of an anti-underage drinking campaign conducted by urban youth of color in an afterschool program. The media ecology environment in the campaign--the integrated…

Learning via Game Design: From Digital to Card Games and Back Again

ERIC Educational Resources Information Center

Marchetti, Emanuela; Valente, Andrea

2015-01-01

In this paper we consider the problem of making design of digital games accessible to primary school children and their teachers, and we argue for the need of digital games that are easy to alter by young learners. We know from previous research projects that digital games do not enable children to express their creativity at full, in contrast…

Context indexing of digital cardiac ultrasound records in PACS

NASA Astrophysics Data System (ADS)

Lobodzinski, S. Suave; Meszaros, Georg N.

1998-07-01

Recent wide adoption of the DICOM 3.0 standard by ultrasound equipment vendors created a need for practical clinical implementations of cardiac imaging study visualization, management and archiving, DICOM 3.0 defines only a logical and physical format for exchanging image data (still images, video, patient and study demographics). All DICOM compliant imaging studies must presently be archived on a 650 Mb recordable compact disk. This is a severe limitation for ultrasound applications where studies of 3 to 10 minutes long are a common practice. In addition, DICOM digital echocardiography objects require physiological signal indexing, content segmentation and characterization. Since DICOM 3.0 is an interchange standard only, it does not define how to database composite video objects. The goal of this research was therefore to address the issues of efficient storage, retrieval and management of DICOM compliant cardiac video studies in a distributed PACS environment. Our Web based implementation has the advantage of accommodating both DICOM defined entity-relation modules (equipment data, patient data, video format, etc.) in standard relational database tables and digital indexed video with its attributes in an object relational database. Object relational data model facilitates content indexing of full motion cardiac imaging studies through bi-directional hyperlink generation that tie searchable video attributes and related objects to individual video frames in the temporal domain. Benefits realized from use of bi-directionally hyperlinked data models in an object relational database include: (1) real time video indexing during image acquisition, (2) random access and frame accurate instant playback of previously recorded full motion imaging data, and (3) time savings from faster and more accurate access to data through multiple navigation mechanisms such as multidimensional queries on an index, queries on a hyperlink attribute, free search and browsing.

Combining Laboratory Experiments with Digital Tools to Do Scientific Inquiry

NASA Astrophysics Data System (ADS)

Kluge, Anders

2014-09-01

This qualitative study investigates the gap between a lab experiment and theory of science. Two groups of 4 students in 2 different classes in 11th grade (15-16 years old) are followed as they process results and experiences from a lab experiment using a digital environment. The experiment is as a part of a larger project about genes and cells, and this study concerns how the digital environment can support students' sensemaking. The study shows how the students only are left with 'how-to' skills before they engage in collaborative processing supported by their own picture from the experiment. The picture becomes a hub for interactive sensemaking and is extensively used for annotation and discussion. Four elements in the digital support are identified as crucial: an extendable point of reference, facilitation to compare and contrast, a pointer to standard science knowledge, and a structure to guide the students to significant issues. The study identifies where the digital support succeeds and fails in this process of sensemaking from a lab experiment.

Denoising time-domain induced polarisation data using wavelet techniques

NASA Astrophysics Data System (ADS)

Deo, Ravin N.; Cull, James P.

2016-05-01

Time-domain induced polarisation (TDIP) methods are routinely used for near-surface evaluations in quasi-urban environments harbouring networks of buried civil infrastructure. A conventional technique for improving signal to noise ratio in such environments is by using analogue or digital low-pass filtering followed by stacking and rectification. However, this induces large distortions in the processed data. In this study, we have conducted the first application of wavelet based denoising techniques for processing raw TDIP data. Our investigation included laboratory and field measurements to better understand the advantages and limitations of this technique. It was found that distortions arising from conventional filtering can be significantly avoided with the use of wavelet based denoising techniques. With recent advances in full-waveform acquisition and analysis, incorporation of wavelet denoising techniques can further enhance surveying capabilities. In this work, we present the rationale for utilising wavelet denoising methods and discuss some important implications, which can positively influence TDIP methods.

Distance Learning Using Digital Fiber Optics: Applications, Technologies, and Benefits.

ERIC Educational Resources Information Center

Currer, Joanne M.

Distance learning provides special or advanced classes in rural schools where declining population has led to decreased funding and fewer classes. With full-motion video using digital fiber, two or more sites are connected into a two-way, full-motion, video conference. The teacher can see and hear the students, and the students can see and hear…

Full-color digitized holography for large-scale holographic 3D imaging of physical and nonphysical objects.

PubMed

Matsushima, Kyoji; Sonobe, Noriaki

2018-01-01

Digitized holography techniques are used to reconstruct three-dimensional (3D) images of physical objects using large-scale computer-generated holograms (CGHs). The object field is captured at three wavelengths over a wide area at high densities. Synthetic aperture techniques using single sensors are used for image capture in phase-shifting digital holography. The captured object field is incorporated into a virtual 3D scene that includes nonphysical objects, e.g., polygon-meshed CG models. The synthetic object field is optically reconstructed as a large-scale full-color CGH using red-green-blue color filters. The CGH has a wide full-parallax viewing zone and reconstructs a deep 3D scene with natural motion parallax.

MDA-image: an environment of networked desktop computers for teleradiology/pathology.

PubMed

Moffitt, M E; Richli, W R; Carrasco, C H; Wallace, S; Zimmerman, S O; Ayala, A G; Benjamin, R S; Chee, S; Wood, P; Daniels, P

1991-04-01

MDA-Image, a project of The University of Texas M. D. Anderson Cancer Center, is an environment of networked desktop computers for teleradiology/pathology. Radiographic film is digitized with a film scanner and histopathologic slides are digitized using a red, green, and blue (RGB) video camera connected to a microscope. Digitized images are stored on a data server connected to the institution's computer communication network (Ethernet) and can be displayed from authorized desktop computers connected to Ethernet. Images are digitized for cases presented at the Bone Tumor Management Conference, a multidisciplinary conference in which treatment options are discussed among clinicians, surgeons, radiologists, pathologists, radiotherapists, and medical oncologists. These radiographic and histologic images are shown on a large screen computer monitor during the conference. They are available for later review for follow-up or representation.

ECDSA B-233 with Precomputation 1.0 Beta Version

DOE Office of Scientific and Technical Information (OSTI.GOV)

Draelos, Timothy; Schroeppel, Richard; Schoeneman, Barry

2009-12-11

This software, written in C, performs two functions: 1) the generation of digital signatures using ECDSA with the B-233 curve and a table of precomputed values, and 2) the generation and encryption of a table of precomputed values to support the generation of many digital signatures. The computationally expensive operations of ECDSA signature generation are precomputed, stored in a table, and protected with AES encryption. This allows digital signatures to be generated in low-power, computationally-constrained environments, such as are often found in non-proliferation monitoring applications. The encrypted, precomputed table and digital signature generation software are used to provide public keymore » data authentication for sensor data. When digital data is presented for signing, a set of values from the table is decrypted and used to generate an ECDSA digital signatureThis software, written in C, performs two functions: 1) the generation of digital signatures using ECDSA with the B-233 curve and a table of precomputed values, and 2) the generation and encryption of a table of precomputed values to support the generation of many digital signatures. The computationally expensive operations of ECDSA signature generation are precomputed, stored in a table, and protected with AES encryption. This allows digital signatures to be generated in low-power, computationally-constrained environments, such as are often found in non-proliferation monitoring applications. The encrypted, precomputed table and digital signature generation software are used to provide public key data authentication for sensor data. When digital data is presented for signing, a set of values from the table is decrypted and used to generate an ECDSA digital signature« less

The Materiality of Digital Collections: Theoretical and Historical Perspectives

ERIC Educational Resources Information Center

Manoff, Marlene

2006-01-01

Digital and textual objects are coming under a new kind of scrutiny as scholars are becoming more interested in physical artifacts and their relation to their social and cultural environment. This study of material culture suggests a need to explore the nature of digital materiality, as well as the broader historical context in which electronic…

Moving Digital Libraries into the Student Learning Space: The GetSmart Experience

ERIC Educational Resources Information Center

Marshall, Byron B.; Chen, Hsinchun; Shen, Rao; Fox, Edward A.

2006-01-01

The GetSmart system was built to support theoretically sound learning processes in a digital library environment by integrating course management, digital library, and concept mapping components to support a constructivist, six-step, information search process. In the fall of 2002 more than 100 students created 1400 concept maps as part of…

A Digital Mixed Methods Research Design: Integrating Multimodal Analysis with Data Mining and Information Visualization for Big Data Analytics

ERIC Educational Resources Information Center

O'Halloran, Kay L.; Tan, Sabine; Pham, Duc-Son; Bateman, John; Vande Moere, Andrew

2018-01-01

This article demonstrates how a digital environment offers new opportunities for transforming qualitative data into quantitative data in order to use data mining and information visualization for mixed methods research. The digital approach to mixed methods research is illustrated by a framework which combines qualitative methods of multimodal…

Digital Curation as a Core Competency in Current Learning and Literacy: A Higher Education Perspective

ERIC Educational Resources Information Center

Ungerer, Leona M.

2016-01-01

Digital curation may be regarded as a core competency in higher education since it contributes to establishing a sense of metaliteracy (an essential requirement for optimally functioning in a modern media environment) among students. Digital curation is gradually finding its way into higher education curricula aimed at fostering social media…

A Survey of the Usability of Digital Reference Services on Academic Health Science Library Web Sites

ERIC Educational Resources Information Center

Dee, Cheryl; Allen, Maryellen

2006-01-01

Reference interactions with patrons in a digital library environment using digital reference services (DRS) has become widespread. However, such services in many libraries appear to be underutilized. A study surveying the ease and convenience of such services for patrons in over 100 academic health science library Web sites suggests that…

Digital Technology in the Tertiary Dance Technique Studio: Expanding Student Engagement through Collaborative and Co-Creative Experiences

ERIC Educational Resources Information Center

Huddy, Avril

2017-01-01

Digital technology has long been integrated into the mainstream learning environment in a variety of ways from basic teaching delivery tools to specific courseware; however, it has struggled to make an impact in the dance technique studio. Despite the enthusiastic and alacritous integration of digital technologies within the repertoire and…

Applying the Quadratic Usage Framework to Research on K-12 STEM Digital Learning Resources

ERIC Educational Resources Information Center

Luetkemeyer, Jennifer R.

2016-01-01

Numerous policymakers have called for K-12 educators to increase their effectiveness by transforming science, technology, engineering, and mathematics (STEM) learning and teaching with digital resources and tools. In this study we outline the significance of studying pressing issues related to use of digital resources in the K-12 environment and…

Investigating the Key Attributes to Enhance Students' Learning Experience in 21st Century Class Environment

ERIC Educational Resources Information Center

Leow, Fui-Theng; Neo, Mai; Hew, Soon Hin

2016-01-01

The 21st century marks the beginning of digital age with the extensive use of digital media, mobile devices, and Internet resources. Recent studies found that this digital era has expanded the landscape of student experiences, and educational technologies as well as increased the educator's awareness on embracing technologies to promote effective…

Digital Doctorates? An Exploratory Study of PhD Candidates' Use of Online Tools

ERIC Educational Resources Information Center

Dowling, Robyn; Wilson, Michael

2017-01-01

Online environments are transforming learning, including doctoral education. Yet the ways in which the PhD experience is shaped and transformed through these digital modes of engagement is seldom addressed, and not systematically understood. In this article, we explore PhD students' perceptions and use of digital tools. Drawing on the results of…

A Digital Library in the Mid-Nineties, Ahead or On Schedule?

ERIC Educational Resources Information Center

Dijkstra, Joost

1994-01-01

Discussion of the future possibilities of digital library systems highlights digital projects developed at Tilburg University (Netherlands). Topics addressed include online access to databases; electronic document delivery; agreements between libraries and Elsevier Science publishers to provide journal articles; full text document delivery; and…

A Preliminary Analysis of LANDSAT-4 Thematic Mapper Radiometric Performance

NASA Technical Reports Server (NTRS)

Justice, C.; Fusco, L.; Mehl, W.

1984-01-01

Analysis was performed to characterize the radiometry of three Thematic Mapper (TM) digital products of a scene of Arkansas. The three digital products examined were the NASA raw (BT) product, the radiometrically corrected (AT) product and the radiometrically and geometrically corrected (PT) product. The frequency distribution of the digital data; the statistical correlation between the bands; and the variability between the detectors within a band were examined on a series of image subsets from the full scene. The results are presented from one 1024 x 1024 pixel subset of Realfoot Lake, Tennessee which displayed a representative range of ground conditions and cover types occurring within the full frame image. Bands 1, 2 and 5 of the sample area are presented. The subsets were extracted from the three digital data products to cover the same geographic area. This analysis provides the first step towards a full appraisal of the TM radiometry being performed as part of the ESA/CEC contribution to the NASA/LIDQA program.

Museum Informatics.

ERIC Educational Resources Information Center

Marty, Paul F.; Rayward, W. Boyd; Twidale, Michael B.

2003-01-01

Discusses museum informatics that studies how information science and technology affect the museum environment. Examines digital technology; information organization and access; digitization, personal computers, and the Internet; data sharing; standards; social impacts of new technologies; collaboration; consortia; multimedia exhibits; virtual…

Design requirements for ubiquitous computing environments for healthcare professionals.

PubMed

Bång, Magnus; Larsson, Anders; Eriksson, Henrik

2004-01-01

Ubiquitous computing environments can support clinical administrative routines in new ways. The aim of such computing approaches is to enhance routine physical work, thus it is important to identify specific design requirements. We studied healthcare professionals in an emergency room and developed the computer-augmented environment NOSTOS to support teamwork in that setting. NOSTOS uses digital pens and paper-based media as the primary input interface for data capture and as a means of controlling the system. NOSTOS also includes a digital desk, walk-up displays, and sensor technology that allow the system to track documents and activities in the workplace. We propose a set of requirements and discuss the value of tangible user interfaces for healthcare personnel. Our results suggest that the key requirements are flexibility in terms of system usage and seamless integration between digital and physical components. We also discuss how ubiquitous computing approaches like NOSTOS can be beneficial in the medical workplace.

Re-engineering the process of medical imaging physics and technology education and training.

PubMed

Sprawls, Perry

2005-09-01

The extensive availability of digital technology provides an opportunity for enhancing both the effectiveness and efficiency of virtually all functions in the process of medical imaging physics and technology education and training. This includes degree granting academic programs within institutions and a wide spectrum of continuing education lifelong learning activities. Full achievement of the advantages of technology-enhanced education (e-learning, etc.) requires an analysis of specific educational activities with respect to desired outcomes and learning objectives. This is followed by the development of strategies and resources that are based on established educational principles. The impact of contemporary technology comes from its ability to place learners into enriched learning environments. The full advantage of a re-engineered and implemented educational process involves changing attitudes and functions of learning facilitators (teachers) and resource allocation and sharing both within and among institutions.

Building a Digital Library: A Technology Manager's Point of View.

ERIC Educational Resources Information Center

Shaw, Elizabeth J.

2000-01-01

Describes the Historic Pittsburgh project at the University of Pittsburgh, a joint project with the Historical Society of Western Pennsylvania to produce a digital collection of historical materials available on the Internet. Discusses costs; metadata; digitization and preservation of originals; full-text capabilities; scanning; quality review;…

Digital Libraries: Situating Use in Changing Information Infrastructure.

ERIC Educational Resources Information Center

Bishop, Ann Peterson; Neumann, Laura J.; Star, Susan Leigh; Merkel, Cecelia; Ignacio, Emily; Sandusky, Robert J.

2000-01-01

Reviews empirical studies about how digital libraries evolve for use in scientific and technical work based on the Digital Libraries Initiative (DLI) at the University of Illinois. Discusses how users meet infrastructure and document disaggregation; describes use of the DLI testbed of full text journal articles; and explains research methodology.…

Beyond Preservation: New Directions for Technological Innovation through Intangible Cultural Heritage

ERIC Educational Resources Information Center

Robbins, Christopher

2010-01-01

While many digitization projects are currently underway, to help preserve Indigenous traditions, few explore the full potential of the development of digital media and networked technology through Indigenous cultures. This paper outlines the three phases necessary for a robust digital preservation, promotion and growth project: 1) Straightforward…

Digital vs. conventional full-arch implant impressions: a comparative study.

PubMed

Amin, Sarah; Weber, Hans Peter; Finkelman, Matthew; El Rafie, Khaled; Kudara, Yukio; Papaspyridakos, Panos

2017-11-01

To test whether or not digital full-arch implant impressions with two different intra-oral scanners (CEREC Omnicam and True Definition) have the same accuracy as conventional ones. The hypothesis was that the splinted open-tray impressions would be more accurate than digital full-arch impressions. A stone master cast representing an edentulous mandible using five internal connection implant analogs (Straumann Bone Level RC, Basel, Switzerland) was fabricated. The three median implants were parallel to each other, the far left implant had 10°, and the far right had 15° distal angulation. A splinted open-tray technique was used for the conventional polyether impressions (n = 10) for Group 1. Digital impressions (n = 10) were taken with two intra-oral optical scanners (CEREC Omnicam and 3M True Definition) after connecting polymer scan bodies to the master cast for groups 2 and 3. Master cast and conventional impression test casts were digitized with a high-resolution reference scanner (Activity 880 scanner; Smart Optics, Bochum, Germany) to obtain digital files. Standard tessellation language (STL) datasets from the three test groups of digital and conventional impressions were superimposed with the STL dataset from the master cast to assess the 3D deviations. Deviations were recorded as root-mean-square error. To compare the master cast with conventional and digital impressions at the implant level, Welch's F-test was used together with Games-Howell post hoc test. Group I had a mean value of 167.93 μm (SD 50.37); Group II (Omnicam) had a mean value of 46.41 μm (SD 7.34); Group III (True Definition) had a mean value of 19.32 μm (SD 2.77). Welch's F-test was used together with the Games-Howell test for post hoc comparisons. Welch's F-test showed a significant difference between the groups (P < 0.001). The Games-Howell test showed statistically significant 3D deviations for all three groups (P < 0.001). Full-arch digital implant impressions using True Definition scanner and Omnicam were significantly more accurate than the conventional impressions with the splinted open-tray technique. Additionally, the digital impressions with the True Definition scanner had significantly less 3D deviations when compared with the Omnicam. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Integration of today's digital state with tomorrow's visual environment

NASA Astrophysics Data System (ADS)

Fritsche, Dennis R.; Liu, Victor; Markandey, Vishal; Heimbuch, Scott

1996-03-01

New developments in visual communication technologies, and the increasingly digital nature of the industry infrastructure as a whole, are converging to enable new visual environments with an enhanced visual component in interaction, entertainment, and education. New applications and markets can be created, but this depends on the ability of the visual communications industry to provide market solutions that are cost effective and user friendly. Industry-wide cooperation in the development of integrated, open architecture applications enables the realization of such market solutions. This paper describes the work being done by Texas Instruments, in the development of its Digital Light ProcessingTM technology, to support the development of new visual communications technologies and applications.

Community Digital Library Requirements for the Southern California Earthquake Center Community Modeling Environment (SCEC/CME)

NASA Astrophysics Data System (ADS)

Moore, R.; Faerman, M.; Minster, J.; Day, S. M.; Ely, G.

2003-12-01

A community digital library provides support for ingestion, organization, description, preservation, and access of digital entities. The technologies that traditionally provide these capabilities are digital libraries (ingestion, organization, description), persistent archives (preservation) and data grids (access). We present a design for the SCEC community digital library that incorporates aspects of all three systems. Multiple groups have created integrated environments that sustain large-scale scientific data collections. By examining these projects, the following stages of implementation can be identified: \\begin{itemize} Definition of semantic terms to associate with relevant information. This includes definition of uniform content descriptors to describe physical quantities relevant to the scientific discipline, and creation of concept spaces to define how the uniform content descriptors are logically related. Organization of digital entities into logical collections that make it simple to browse and manage related material. Definition of services that are used to access and manipulate material in the collection. Creation of a preservation environment for the long-term management of the collection. Each community is faced with heterogeneity that is introduced when data is distributed across multiple sites, or when multiple sets of collection semantics are used, and or when multiple scientific sub-disciplines are federated. We will present the relevant standards that simplify the implementation of the SCEC community library, the resource requirements for different types of data sets that drive the implementation, and the digital library processes that the SCEC community library will support. The SCEC community library can be viewed as the set of processing steps that are required to build the appropriate SCEC reference data sets (SCEC approved encoding format, SCEC approved descriptive metadata, SCEC approved collection organization, and SCEC managed storage location). Each digital entity that is ingested into the SCEC community library is processed and validated for conformance to SCEC standards. These steps generate provenance, descriptive, administrative, structural, and behavioral metadata. Using data grid technology, the descriptive metadata can be registered onto a logical name space that is controlled and managed by the SCEC digital library. A version of the SCEC community digital library is being implemented in the Storage Resource Broker. The SRB system provides almost all the features enumerated above. The peer-to-peer federation of metadata catalogs is planned for release in September, 2003. The SRB system is in production use in multiple projects, from high-energy physics, to astronomy, to earth systems science, to bio-informatics. The SCEC community library will be based on the definition of standard metadata attributes, the creation of logical collections within the SRB, the creation of access services, and the demonstration of a preservation environment. The use of the SRB for the SCEC digital library will sustain the expected collection size and collection capabilities.

2017 Guralp Affinity Digitizer Evaluation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merchant, Bion J.

Sandia National Laboratories has tested and evaluated two Guralp Affinity digitizers. The Affinity digitizers are intended to record sensor output for seismic and infrasound monitoring applications. The purpose of this digitizer evaluation is to measure the performance characteristics in such areas as power consumption, input impedance, sensitivity, full scale, self- noise, dynamic range, system noise, response, passband, and timing. The Affinity digitizers are being evaluated for potential use in the International Monitoring System (IMS) of the Comprehensive Nuclear Test-Ban-Treaty Organization (CTBTO).

Advances in digital printing and quality considerations of digitally printed images

NASA Astrophysics Data System (ADS)

Waes, Walter C.

1997-02-01

The traditional 'graphic arts' market has changed very rapidly. It has been only ten years now since Aldus introduced its 'PageMaker' software for text and layout. The platform used was Apple-Mac, which became also the standard for many other graphic applications. The so-called high-end workstations disappeared. This was the start for what later was called: the desk top publishing revolution. At the same time, image scanning became also user-friendly and heavy duty scanners were reduced to desktop-size. Color- reproduction became a commodity product. Since then, the pre-press industry has been going through a technical nightmare, trying to keep up with the digital explosion. One after another, tasks and crafts of pre-press were being transformed by digital technologies. New technologies in this field came almost too fast for many people to adapt. The next digital revolution will be for the commercial printers. All the reasons are explained later in this document. There is now a definite need for a different business-strategy and a new positioning in the electronic media-world. Niches have to be located for new graphic arts- applications. Electronic services to-and-from originators' and executors environments became a requirement. Data can now flow on-line between the printer and the originator of the job. It is no longer the pre-press shop who is controlling this. In many cases, electronic data goes between the print-buyer or agency and the printer. High power communication-systems with accepted standard color- management are transforming the printer, and more particularly, the pre-press shop fatally. The new digital printing market, now in the beginning of its expected full expansion, has to do with growing requests coming from agencies and other print-buyers for: (1) short-run printing; (2) print-on-demand approximately in-time; (3) personalization or other forms of customization; (4) quick turnaround.

Very High-Speed Digital Video Capability for In-Flight Use

NASA Technical Reports Server (NTRS)

Corda, Stephen; Tseng, Ting; Reaves, Matthew; Mauldin, Kendall; Whiteman, Donald

2006-01-01

digital video camera system has been qualified for use in flight on the NASA supersonic F-15B Research Testbed aircraft. This system is capable of very-high-speed color digital imaging at flight speeds up to Mach 2. The components of this system have been ruggedized and shock-mounted in the aircraft to survive the severe pressure, temperature, and vibration of the flight environment. The system includes two synchronized camera subsystems installed in fuselage-mounted camera pods (see Figure 1). Each camera subsystem comprises a camera controller/recorder unit and a camera head. The two camera subsystems are synchronized by use of an MHub(TradeMark) synchronization unit. Each camera subsystem is capable of recording at a rate up to 10,000 pictures per second (pps). A state-of-the-art complementary metal oxide/semiconductor (CMOS) sensor in the camera head has a maximum resolution of 1,280 1,024 pixels at 1,000 pps. Exposure times of the electronic shutter of the camera range from 1/200,000 of a second to full open. The recorded images are captured in a dynamic random-access memory (DRAM) and can be downloaded directly to a personal computer or saved on a compact flash memory card. In addition to the high-rate recording of images, the system can display images in real time at 30 pps. Inter Range Instrumentation Group (IRIG) time code can be inserted into the individual camera controllers or into the M-Hub unit. The video data could also be used to obtain quantitative, three-dimensional trajectory information. The first use of this system was in support of the Space Shuttle Return to Flight effort. Data were needed to help in understanding how thermally insulating foam is shed from a space shuttle external fuel tank during launch. The cameras captured images of simulated external tank debris ejected from a fixture mounted under the centerline of the F-15B aircraft. Digital video was obtained at subsonic and supersonic flight conditions, including speeds up to Mach 2 and altitudes up to 50,000 ft (15.24 km). The digital video was used to determine the structural survivability of the debris in a real flight environment and quantify the aerodynamic trajectories of the debris.

Ownership of Digital Course Artifacts: Who Can Access and Use Your Words, Images, Sounds, and Clicks?

ERIC Educational Resources Information Center

Dennen, Vanessa P.

2016-01-01

Digital learning environments are spaces in which data are shared, generated, and recorded. At the end of an online course, a rich collection of digital artifacts are left behind by the instructor and learners. Some artifacts are intentionally created learning materials and assignments, some are the products of class interaction in discussion…

Use and Users of Digital Resources: A Focus on Undergraduate Education in the Humanities and Social Sciences

ERIC Educational Resources Information Center

Harley, Diane; Henke, Johnathan; Lawrence, Shannon; Miller, Ian; Perciali, Irene; Nasatir, David

2006-01-01

The purpose of our research was (1) to map the universe of digital resources available to a subset of undergraduate educators in the humanities and social sciences, and (2) to investigate how and if available digital resources are actually being used in undergraduate teaching environments. We employed multiple methods, including surveys and focus…

Coastal Bathymetry Using Satellite Observation in Support of Intelligence Preparation of the Environment

DTIC Science & Technology

2011-09-01

Sensor ..........................................................................25 2. The Environment for Visualizing Images 4.7 (ENVI......DEM Digital Elevation Model ENVI Environment for Visualizing Images HADR Humanitarian and Disaster Relief IfSAR Interferometric Synthetic Aperture

Developing an undergraduate geography course on digital image processing of remotely sensed data

NASA Technical Reports Server (NTRS)

Baumann, P. R.

1981-01-01

Problems relating to the development of a digital image processing course in an undergraduate geography environment is discussed. Computer resource requirements, course prerequisites, and the size of the study area are addressed.

Investigation of alternative organizational structures for a digitized platoon

NASA Astrophysics Data System (ADS)

Bossi, Linda L. M.; Tack, David W.; Angel, Harold A.; Vilhena, Paul G. S.; Frim, John

2006-05-01

To evaluate the effect of digitization on platoon effectiveness and investigate the suitability of different platoon structures, a twelve-day field trial was undertaken with a Company of light infantry at Fort Benning, Georgia. Test missions were conducted in both day and night conditions, in wooded and urban terrain environments, in each of three organizational structures, with and without digitization. The three different organizational structures included our current in-service 8-man Section, a 13-man USMC squad, and a distributed model comprising six four-man teams. Results of this study confirmed that the effectiveness of a dismounted platoon is significantly enhanced by the use of select digital enhancements in the areas of navigation, situation awareness, communications, and command. During night operations, digitally-enabled capabilities were the difference between mission success and failure. None of the organizational structures tested proved to be universally better than the others at optimizing the benefits of digitally-enhanced capabilities, although each had their strengths and weaknesses. However, considerable insights were gained in the organizational structure issues of distributed small unit command and control, swarming formation tactics, and the tactics, techniques, and procedures necessary to employ small units effectively in a NCW environment.

Clinical Digital Libraries Project: design approach and exploratory assessment of timely use in clinical environments*

PubMed Central

MacCall, Steven L.

2006-01-01

Objective: The paper describes and evaluates the use of Clinical Digital Libraries Project (CDLP) digital library collections in terms of their facilitation of timely clinical information seeking. Design: A convenience sample of CDLP Web server log activity over a twelve-month period (7/2002 to 6/2003) was analyzed for evidence of timely information seeking after users were referred to digital library clinical topic pages from Web search engines. Sample searches were limited to those originating from medical schools (26% North American and 19% non-North American) and from hospitals or clinics (51% North American and 4% non-North American). Measurement: Timeliness was determined based on a calculation of the difference between the timestamps of the first and last Web server log “hit” during each search in the sample. The calculated differences were mapped into one of three ranges: less than one minute, one to three minutes, and three to five minutes. Results: Of the 864 searches analyzed, 48% were less than 1 minute, 41% were 1 to 3 minutes, and 11% were 3 to 5 minutes. These results were further analyzed by environment (medical schools versus hospitals or clinics) and by geographic location (North America versus non-North American). Searches reflected a consistent pattern of less than 1 minute in these environments. Though the results were not consistent on a month-by-month basis over the entire time period, data for 8 of 12 months showed that searches shorter than 1 minute predominated and data for 1 month showed an equal number of less than 1 minute and 1 to 3 minute searches. Conclusions: The CDLP digital library collections provided timely access to high-quality Web clinical resources when used for information seeking in medical education and hospital or clinic environments from North American and non–North American locations and consistently provided access to the sought information within the documented two-minute standard. The limitations of the use of Web server data warrant an exploratory assessment. This research also suggests the need for further investigation in the area of timely digital library collection services to clinical environments. PMID:16636712

Clinical Digital Libraries Project: design approach and exploratory assessment of timely use in clinical environments.

PubMed

Maccall, Steven L

2006-04-01

The paper describes and evaluates the use of Clinical Digital Libraries Project (CDLP) digital library collections in terms of their facilitation of timely clinical information seeking. A convenience sample of CDLP Web server log activity over a twelve-month period (7/2002 to 6/2003) was analyzed for evidence of timely information seeking after users were referred to digital library clinical topic pages from Web search engines. Sample searches were limited to those originating from medical schools (26% North American and 19% non-North American) and from hospitals or clinics (51% North American and 4% non-North American). Timeliness was determined based on a calculation of the difference between the timestamps of the first and last Web server log "hit" during each search in the sample. The calculated differences were mapped into one of three ranges: less than one minute, one to three minutes, and three to five minutes. Of the 864 searches analyzed, 48% were less than 1 minute, 41% were 1 to 3 minutes, and 11% were 3 to 5 minutes. These results were further analyzed by environment (medical schools versus hospitals or clinics) and by geographic location (North America versus non-North American). Searches reflected a consistent pattern of less than 1 minute in these environments. Though the results were not consistent on a month-by-month basis over the entire time period, data for 8 of 12 months showed that searches shorter than 1 minute predominated and data for 1 month showed an equal number of less than 1 minute and 1 to 3 minute searches. The CDLP digital library collections provided timely access to high-quality Web clinical resources when used for information seeking in medical education and hospital or clinic environments from North American and non-North American locations and consistently provided access to the sought information within the documented two-minute standard. The limitations of the use of Web server data warrant an exploratory assessment. This research also suggests the need for further investigation in the area of timely digital library collection services to clinical environments.

Opportunities and Constraints in Disseminating Qualitative Research in Web 2.0 Virtual Environments.

PubMed

Hays, Charles A; Spiers, Judith A; Paterson, Barbara

2015-11-01

The Web 2.0 digital environment is revolutionizing how users communicate and relate to each other, and how information is shared, created, and recreated within user communities. The social media technologies in the Web 2.0 digital ecosystem are fundamentally changing the opportunities and dangers in disseminating qualitative health research. The social changes influenced by digital innovations shift dissemination from passive consumption to user-centered, apomediated cooperative approaches, the features of which are underutilized by many qualitative researchers. We identify opportunities new digital media presents for knowledge dissemination activities including access to wider audiences with few gatekeeper constraints, new perspectives, and symbiotic relationships between researchers and users. We also address some of the challenges in embracing these technologies including lack of control, potential for unethical co-optation of work, and cyberbullying. Finally, we offer solutions to enhance research dissemination in sustainable, ethical, and effective strategies. © The Author(s) 2015.

Collaborative learning model inquiring based on digital game

NASA Astrophysics Data System (ADS)

Yuan, Jiugen; Xing, Ruonan

2012-04-01

With the development of computer education software, digital educational game has become an important part in our life, entertainment and education. Therefore how to make full use of digital game's teaching functions and educate through entertainment has become the focus of current research. The thesis make a connection between educational game and collaborative learning, the current popular teaching model, and concludes digital game-based collaborative learning model combined with teaching practice.

Flight evaluation of a digital electronic engine control system in an F-15 airplane

NASA Technical Reports Server (NTRS)

Myers, L. P.; Mackall, K. G.; Burcham, F. W., Jr.; Walter, W. A.

1982-01-01

Benefits provided by a full-authority digital engine control are related to improvements in engine efficiency, performance, and operations. An additional benefit is the capability of detecting and accommodating failures in real time and providing engine-health diagnostics. The digital electronic engine control (DEEC), is a full-authority digital engine control developed for the F100-PW-100 turbofan engine. The DEEC has been flight tested on an F-15 aircraft. The flight tests had the objective to evaluate the DEEC hardware and software over the F-15 flight envelope. A description is presented of the results of the flight tests, which consisted of nonaugmented and augmented throttle transients, airstarts, and backup control operations. The aircraft, engine, DEEC system, and data acquisition and reduction system are discussed.

Student perceptions of digital versus traditional slide use in undergraduate education.

PubMed

Solberg, Brooke L

2012-01-01

Digitized slides provide a number of intriguing benefits for educators. Before their implementation, however, educators should consider student opinion related to their use. This mixed-methods study directly compared Medical Laboratory Science (MLS) student perceptions of learning experiences in both digital and traditional slide laboratory settings. Results suggested that the majority of students preferred learning with digital slides, and numerous reasons for this preference were identified. Survey responses indicated that students using digital slides tended to view their performances, instructor feedback, and their learning environment more positively than students using traditional slides. Apprehensions about digital slide use were also detected from students preferring traditional slides. These findings provide a guide on how best to exploit both digital and traditional slides in an educational setting.

The digital darkroom, part 3: digital presentation in plastic surgery.

PubMed

Galdino, G M; Chiaramonte, M; Klatsky, S A

2001-01-01

We summarize here the third and final part of our series on the Digital Darkroom. In this part, we review the use of digital technology for medical and other presentations, including the kinds of equipment available, the advantages and disadvantages of digital projection, and the most common pitfalls encountered in preparing and presenting material in digital presentations. The full text of the complete series, including expanded illustrative material and complete bibliographic documentation, is now available at our journal web site at . Please see page 39 for instructions on how to access Aesthetic Surgery Journal Online and view the entire series.

Digital Libraries: Universal Access to Human Knowledge. Report to the President.

ERIC Educational Resources Information Center

National Coordination Office for Information Technology Research and Development, Arlington, VA.

This report to the President and Congress provides an overview of digital libraries. The following related findings are discussed: the full potential of today's digital libraries to support the national challenge transformations has not yet been realized; the federal government can and should do much more to further the science, technology, and…

76 FR 44821 - Digital Low Power Television, Television Translator, and Television Booster Stations and To Amend...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-27

...] Digital Low Power Television, Television Translator, and Television Booster Stations and To Amend Rules... this proceeding in order to allow a timely and successful completion of the low power television digital transition. Although Congress established a hard deadline of June 12, 2009 for full power stations...

The Use of Digitized Images in Developing Software for Young Children.

ERIC Educational Resources Information Center

Wright, June L.

1992-01-01

Parents and children interacted with computer-based representations of a park, one with animated picture graphics and one with digitized full motion video. Children who interacted with the digitized representation replayed the program more and showed a stronger cognitive focus on the representation than did the other children. (LB)

Evolution of synchronization and desynchronization in digital organisms.

PubMed

Knoester, David B; McKinley, Philip K

2011-01-01

We present a study in the evolution of temporal behavior, specifically synchronization and desynchronization, through digital evolution and group selection. In digital evolution, a population of self-replicating computer programs exists in a user-defined computational environment and is subject to instruction-level mutations and natural selection. Group selection links the survival of the individual to the survival of its group, thus encouraging cooperation. Previous approaches to engineering synchronization and desynchronization algorithms have taken inspiration from nature: In the well-known firefly model, the only form of communication between agents is in the form of flash messages among neighbors. Here we demonstrate that populations of digital organisms, provided with a similar mechanism and minimal information about their environment, are capable of evolving algorithms for synchronization and desynchronization, and that the evolved behaviors are robust to message loss. We further describe how the evolved behavior for synchronization mimics that of the well-known Ermentrout model for firefly synchronization in biology. In addition to discovering self-organizing behaviors for distributed computing systems, this result indicates that digital evolution may be used to further our understanding of synchronization in biology.

Wearable computer technology for dismounted applications

NASA Astrophysics Data System (ADS)

Daniels, Reginald

2010-04-01

Small computing devices which rival the compact size of traditional personal digital assistants (PDA) have recently established a market niche. These computing devices are small enough to be considered unobtrusive for humans to wear. The computing devices are also powerful enough to run full multi-tasking general purpose operating systems. This paper will explore the wearable computer information system for dismounted applications recently fielded for ground-based US Air Force use. The environments that the information systems are used in will be reviewed, as well as a description of the net-centric, ground-based warrior. The paper will conclude with a discussion regarding the importance of intuitive, usable, and unobtrusive operator interfaces for dismounted operators.

Performance Characterization of Digital Optical Data Transfer Systems for Use in the Space Radiation Environment

NASA Technical Reports Server (NTRS)

Reed, Robert A.; Ladbury, Ray L.; Day, John H. (Technical Monitor)

2000-01-01

Radiation effects in photonic and microelectronic components can impact the performance of high-speed digital optical data link in a variety of ways. This segment of the short course focuses on radiation effects in digital optical data links operating in the MHz to GHz regime. (Some of the information is applicable to frequencies above and below this regime) The three basic component level effects that should be considered are Total Ionizing Dose (TID), Displacement Damage Dose (DDD) and Single Event Effects (SEE). In some cases the system performance degradation can be quantified from component level tests, while in others a more holistic characterization approach must be taken. In Section 2.0 of this segment of the Short Course we will give a brief overview of the space radiation environment follow by a summary of the basic space radiation effects important for microelectronics and photonics listed above. The last part of this section will give an example of a typical mission radiation environment requirements. Section 3.0 gives an overview of intra-satellite digital optical data link systems. It contains a discussion of the digital optical data link and it's components. Also, we discuss some of the important system performance metrics that are impacted by radiation effects degradation of optical and optoelectronic component performance. Section 4.0 discusses radiation effects in optical and optoelectronic components. While each component effect will be discussed, the focus of this section is on degradation of passive optical components and SEE in photodiodes (other mechanisms are covered in segment II of this short course entitled "Photonic Devices with Complex and Multiple Failure Modes"). Section 5.0 will focus on optical data link system response to the space radiation environment. System level SEE ground testing will be discussed. Then we give a discussion of system level assessment of data link performance when operating in the space radiation environment.

Digital Signal Processing and Control for the Study of Gene Networks

NASA Astrophysics Data System (ADS)

Shin, Yong-Jun

2016-04-01

Thanks to the digital revolution, digital signal processing and control has been widely used in many areas of science and engineering today. It provides practical and powerful tools to model, simulate, analyze, design, measure, and control complex and dynamic systems such as robots and aircrafts. Gene networks are also complex dynamic systems which can be studied via digital signal processing and control. Unlike conventional computational methods, this approach is capable of not only modeling but also controlling gene networks since the experimental environment is mostly digital today. The overall aim of this article is to introduce digital signal processing and control as a useful tool for the study of gene networks.

Digital Signal Processing and Control for the Study of Gene Networks.

PubMed

Shin, Yong-Jun

2016-04-22

Thanks to the digital revolution, digital signal processing and control has been widely used in many areas of science and engineering today. It provides practical and powerful tools to model, simulate, analyze, design, measure, and control complex and dynamic systems such as robots and aircrafts. Gene networks are also complex dynamic systems which can be studied via digital signal processing and control. Unlike conventional computational methods, this approach is capable of not only modeling but also controlling gene networks since the experimental environment is mostly digital today. The overall aim of this article is to introduce digital signal processing and control as a useful tool for the study of gene networks.

Digital Signal Processing and Control for the Study of Gene Networks

PubMed Central

Shin, Yong-Jun

2016-01-01

Thanks to the digital revolution, digital signal processing and control has been widely used in many areas of science and engineering today. It provides practical and powerful tools to model, simulate, analyze, design, measure, and control complex and dynamic systems such as robots and aircrafts. Gene networks are also complex dynamic systems which can be studied via digital signal processing and control. Unlike conventional computational methods, this approach is capable of not only modeling but also controlling gene networks since the experimental environment is mostly digital today. The overall aim of this article is to introduce digital signal processing and control as a useful tool for the study of gene networks. PMID:27102828

Multiscale image processing and antiscatter grids in digital radiography.

PubMed

Lo, Winnie Y; Hornof, William J; Zwingenberger, Allison L; Robertson, Ian D

2009-01-01

Scatter radiation is a source of noise and results in decreased signal-to-noise ratio and thus decreased image quality in digital radiography. We determined subjectively whether a digitally processed image made without a grid would be of similar quality to an image made with a grid but without image processing. Additionally the effects of exposure dose and of a using a grid with digital radiography on overall image quality were studied. Thoracic and abdominal radiographs of five dogs of various sizes were made. Four acquisition techniques were included (1) with a grid, standard exposure dose, digital image processing; (2) without a grid, standard exposure dose, digital image processing; (3) without a grid, half the exposure dose, digital image processing; and (4) with a grid, standard exposure dose, no digital image processing (to mimic a film-screen radiograph). Full-size radiographs as well as magnified images of specific anatomic regions were generated. Nine reviewers rated the overall image quality subjectively using a five-point scale. All digitally processed radiographs had higher overall scores than nondigitally processed radiographs regardless of patient size, exposure dose, or use of a grid. The images made at half the exposure dose had a slightly lower quality than those made at full dose, but this was only statistically significant in magnified images. Using a grid with digital image processing led to a slight but statistically significant increase in overall quality when compared with digitally processed images made without a grid but whether this increase in quality is clinically significant is unknown.

A comparison of hardware description languages. [describing digital systems structure and behavior to a computer

NASA Technical Reports Server (NTRS)

Shiva, S. G.

1978-01-01

Several high level languages which evolved over the past few years for describing and simulating the structure and behavior of digital systems, on digital computers are assessed. The characteristics of the four prominent languages (CDL, DDL, AHPL, ISP) are summarized. A criterion for selecting a suitable hardware description language for use in an automatic integrated circuit design environment is provided.

Air Force Human Resources Laboratory Annual Report - Fiscal Year 1983.

DTIC Science & Technology

1984-08-01

were performed - digital image-generation visual system and three in the Advanced Simulator for Pilot Training at associated wide-angle windows. The...inputs by the trainee. This arrangement, and survivability in high-threat environments are , with its corresponding analog-to- digital interface... digitized models of various military vehicles and aircraft for continual update/expansion. Utilization: An interactive modeling system will be user

Maritime Cyber Security University Research

DTIC Science & Technology

2016-05-01

traffic so vital to the global economy . The vulnerabilities associated with reliance on digital systems in the maritime environment must be continuously...Abstract (MAXIMUM 200 WORDS) Modern maritime systems are highly complex digital systems to ensure the safety and efficient operation of the shipping...integrity of the entrances to our " digital ports" and work to develop practical cyber security solutions to protect the nation’s maritime

Maritime Cyber Security University Research: Phase 1

DTIC Science & Technology

2016-05-01

the global economy . The vulnerabilities associated with reliance on digital systems in the maritime environment must be continuously examined. System...Report: Modern maritime systems are highly complex digital systems to ensure the safety and efficient operation of the shipping traffic so vital to...entrances to our " digital ports" and work to develop practical cyber security solutions to protect the nation’s maritime infrastructure. 17. Key

Using Autobiographical Digital Storytelling for the Integration of a Foreign Student in the School Environment. A Case Study

ERIC Educational Resources Information Center

Fokides, Emmanuel

2016-01-01

Immigrant students face a multitude of problems, among which are poor social adaptation and school integration. On the other hand, although digital narrations are widely used in education, they are rarely used for aiding students or for the resolution of complex problems. This study exploits the potential of digital narrations towards this end, by…

Creating Collaborative and Convenient Learning Environment Using Cloud-Based Moodle LMS: An Instructor and Administrator Perspective

ERIC Educational Resources Information Center

Kumar, Vikas; Sharma, Deepika

2016-01-01

Students in the digital era are habitual of using digital devices not only for playing and interacting with their friends and peers, but also as a tool for education and learning. These digital natives are highly obsessed with the internet driven portable devices and always demand for a multimedia rich content. This specific demand needs to be…

Confronting the Challenges of the Digital Era. Proceedings of the Membership Meeting of the Association of Research Libraries (133rd, Washington, DC, October 14-16, 1998).

ERIC Educational Resources Information Center

Bhalla, Nicole, Ed.; Barrett, Jaia, Ed.; Wetzel, Karen A., Ed.

The 133rd meeting of the Association of Research Libraries (ARL) focused on strategies for confronting critical challenges associated with the digital era and for fostering understanding from university leaders and supporters regarding the resources needed to perform successfully in this print plus digital environment. Program Session I,…

Using SecondLife Online Virtual World Technology to Introduce Educators to the Digital Culture

NASA Technical Reports Server (NTRS)

Jamison, John

2008-01-01

The rapidly changing culture resulting from new technologies and digital gaming has created an increasing language gap between traditional educators and today's learners (Natkin, 2006; Seely-Brown, 2000). This study seeks to use the online virtual world of SecondLife.com as a tool to introduce educators to this new environment for learning. This study observes the activities and perceptions of a group of educators given unscripted access to this virtual environment. The results 'suggest that although serious technology limitations do currently exist, the potential of this virtual world environment as a learning experience for educators is strong.

The digital environment in men's sexual disorders: A systematic review.

PubMed

García-Cruz, E; Romero-Otero, J; Fode, M; Alcaraz, A

2017-11-01

The revolution of digital technologies constitutes a new setting for the patient-physician relationship and provides patients with a scenario of privacy and universal access to a vast amount of information. However, there is little information on how digital resources are used and what their advantages and disadvantages are. To explore the scope of the scientific research on the use of digital technology related to men's sexual disorders and to analyze the primary sources of digital information related to this field. Systematic searches of the scientific literature, websites (10 first results in each google search) and mobile applications (apps). The searches combined the keywords "web" and "app" with "erectile dysfunction", "premature ejaculation", "Peyronie", "male hypogonadism", and "infertility". Websites and apps were assessed for quality according to predefined indicators. The qualitative analysis of the scientific literature included 116 manuscripts; 47% were clinical studies based on online survey, 9% dealt with digital treatments, 11% with quality/safety of digital healthcare environment, 3% with digital activity, 21% with patient empowerment, and 9% with online drug selling. Of 50 websites assessed for quality, 29 (58%) scored 4 or 5 on a 5-point Likert scale. The app search yielded 40 apps; only 3 of them (8%) reported the identity of a health center or healthcare professional involved. Patients and healthcare professionals may benefit from digital resources related to men's sexual disorders; however, a strong commitment by the scientific and healthcare community is essential to increase the quality of these resources. Copyright © 2017 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

Building Virtual Watersheds: A Global Opportunity to Strengthen Resource Management and Conservation.

PubMed

Benda, Lee; Miller, Daniel; Barquin, Jose; McCleary, Richard; Cai, TiJiu; Ji, Y

2016-03-01

Modern land-use planning and conservation strategies at landscape to country scales worldwide require complete and accurate digital representations of river networks, encompassing all channels including the smallest headwaters. The digital river networks, integrated with widely available digital elevation models, also need to have analytical capabilities to support resource management and conservation, including attributing river segments with key stream and watershed data, characterizing topography to identify landforms, discretizing land uses at scales necessary to identify human-environment interactions, and connecting channels downstream and upstream, and to terrestrial environments. We investigate the completeness and analytical capabilities of national to regional scale digital river networks that are available in five countries: Canada, China, Russia, Spain, and United States using actual resource management and conservation projects involving 12 university, agency, and NGO organizations. In addition, we review one pan-European and one global digital river network. Based on our analysis, we conclude that the majority of the regional, national, and global scale digital river networks in our sample lack in network completeness, analytical capabilities or both. To address this limitation, we outline a general framework to build as complete as possible digital river networks and to integrate them with available digital elevation models to create robust analytical capabilities (e.g., virtual watersheds). We believe this presents a global opportunity for in-country agencies, or international players, to support creation of virtual watersheds to increase environmental problem solving, broaden access to the watershed sciences, and strengthen resource management and conservation in countries worldwide.

Building Virtual Watersheds: A Global Opportunity to Strengthen Resource Management and Conservation

NASA Astrophysics Data System (ADS)

Benda, Lee; Miller, Daniel; Barquin, Jose; McCleary, Richard; Cai, TiJiu; Ji, Y.

2016-03-01

Modern land-use planning and conservation strategies at landscape to country scales worldwide require complete and accurate digital representations of river networks, encompassing all channels including the smallest headwaters. The digital river networks, integrated with widely available digital elevation models, also need to have analytical capabilities to support resource management and conservation, including attributing river segments with key stream and watershed data, characterizing topography to identify landforms, discretizing land uses at scales necessary to identify human-environment interactions, and connecting channels downstream and upstream, and to terrestrial environments. We investigate the completeness and analytical capabilities of national to regional scale digital river networks that are available in five countries: Canada, China, Russia, Spain, and United States using actual resource management and conservation projects involving 12 university, agency, and NGO organizations. In addition, we review one pan-European and one global digital river network. Based on our analysis, we conclude that the majority of the regional, national, and global scale digital river networks in our sample lack in network completeness, analytical capabilities or both. To address this limitation, we outline a general framework to build as complete as possible digital river networks and to integrate them with available digital elevation models to create robust analytical capabilities (e.g., virtual watersheds). We believe this presents a global opportunity for in-country agencies, or international players, to support creation of virtual watersheds to increase environmental problem solving, broaden access to the watershed sciences, and strengthen resource management and conservation in countries worldwide.

Full-scale system impact analysis: Digital document storage project

NASA Technical Reports Server (NTRS)

1989-01-01

The Digital Document Storage Full Scale System can provide cost effective electronic document storage, retrieval, hard copy reproduction, and remote access for users of NASA Technical Reports. The desired functionality of the DDS system is highly dependent on the assumed requirements for remote access used in this Impact Analysis. It is highly recommended that NASA proceed with a phased, communications requirement analysis to ensure that adequate communications service can be supplied at a reasonable cost in order to validate recent working assumptions upon which the success of the DDS Full Scale System is dependent.

Multiple-function multi-input/multi-output digital control and on-line analysis

NASA Technical Reports Server (NTRS)

Hoadley, Sherwood T.; Wieseman, Carol D.; Mcgraw, Sandra M.

1992-01-01

The design and capabilities of two digital controller systems for aeroelastic wind-tunnel models are described. The first allowed control of flutter while performing roll maneuvers with wing load control as well as coordinating the acquisition, storage, and transfer of data for on-line analysis. This system, which employs several digital signal multi-processor (DSP) boards programmed in high-level software languages, is housed in a SUN Workstation environment. A second DCS provides a measure of wind-tunnel safety by functioning as a trip system during testing in the case of high model dynamic response or in case the first DCS fails. The second DCS uses National Instruments LabVIEW Software and Hardware within a Macintosh environment.

Electro-optic architecture (EOA) for sensors and actuators in aircraft propulsion systems

NASA Technical Reports Server (NTRS)

Glomb, W. L., Jr.

1989-01-01

Results of a study to design an optimal architecture for electro-optical sensing and control in advanced aircraft and space systems are described. The propulsion full authority digital Electronic Engine Control (EEC) was the focus for the study. The recommended architecture is an on-engine EEC which contains electro-optic interface circuits for fiber-optic sensors on the engine. Size and weight are reduced by multiplexing arrays of functionally similar sensors on a pair of optical fibers to common electro-optical interfaces. The architecture contains common, multiplex interfaces to seven sensor groups: (1) self luminous sensors; (2) high temperatures; (3) low temperatures; (4) speeds and flows; (5) vibration; (6) pressures; and (7) mechanical positions. Nine distinct fiber-optic sensor types were found to provide these sensing functions: (1) continuous wave (CW) intensity modulators; (2) time division multiplexing (TDM) digital optic codeplates; (3) time division multiplexing (TDM) analog self-referenced sensors; (4) wavelength division multiplexing (WDM) digital optic code plates; (5) wavelength division multiplexing (WDM) analog self-referenced intensity modulators; (6) analog optical spectral shifters; (7) self-luminous bodies; (8) coherent optical interferometers; and (9) remote electrical sensors. The report includes the results of a trade study including engine sensor requirements, environment, the basic sensor types, and relevant evaluation criteria. These figures of merit for the candidate interface types were calculated from the data supplied by leading manufacturers of fiber-optic sensors.

The Translucent Cadaver: An Evaluation of the Use of Full Body Digital X-Ray Images and Drawings in Surface Anatomy Education

ERIC Educational Resources Information Center

Kotze, Sanet Henriet; Mole, Calvin Gerald; Greyling, Linda Magdalena

2012-01-01

It has been noted by staff at the Faculty of Health Sciences, Stellenbosch University that medical students neglect the study of surface anatomy during dissection. This study reports on the novel use of Lodox[R] Statscan[R] images in anatomical education, particularly the teaching of surface anatomy. Full body digital X-ray images (Lodox Statscan)…

Two-bit trinary full adder design based on restricted signed-digit numbers

NASA Astrophysics Data System (ADS)

Ahmed, J. U.; Awwal, A. A. S.; Karim, M. A.

1994-08-01

A 2-bit trinary full adder using a restricted set of a modified signed-digit trinary numeric system is designed. When cascaded together to design a multi-bit adder machine, the resulting system is able to operate at a speed independent of the size of the operands. An optical non-holographic content addressable memory based on binary coded arithmetic is considered for implementing the proposed adder.

Digitally-bypassed transducers: interfacing digital mockups to real-time medical equipment.

PubMed

Sirowy, Scott; Givargis, Tony; Vahid, Frank

2009-01-01

Medical device software is sometimes initially developed by using a PC simulation environment that executes models of both the device and a physiological system, and then later by connecting the actual medical device to a physical mockup of the physiological system. An alternative is to connect the medical device to a digital mockup of the physiological system, such that the device believes it is interacting with a physiological system, but in fact all interaction is entirely digital. Developing medical device software by interfacing with a digital mockup enables development without costly or dangerous physical mockups, and enables execution that is faster or slower than real time. We introduce digitally-bypassed transducers, which involve a small amount of hardware and software additions, and which enable interfacing with digital mockups.

The Predicaments of Language Learners in Traditional Learning Environments

ERIC Educational Resources Information Center

Shafie, Latisha Asmaak; Mansor, Mahani

2009-01-01

Some public universities in developing countries have traditional language learning environments such as classrooms with only blackboards and furniture which do not provide conducive learning environments. These traditional environments are unable to cater for digital learners who need to learn with learning technologies. In order to create…

A Computing Environment to Support Repeatable Scientific Big Data Experimentation of World-Wide Scientific Literature

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schlicher, Bob G; Kulesz, James J; Abercrombie, Robert K

A principal tenant of the scientific method is that experiments must be repeatable and relies on ceteris paribus (i.e., all other things being equal). As a scientific community, involved in data sciences, we must investigate ways to establish an environment where experiments can be repeated. We can no longer allude to where the data comes from, we must add rigor to the data collection and management process from which our analysis is conducted. This paper describes a computing environment to support repeatable scientific big data experimentation of world-wide scientific literature, and recommends a system that is housed at the Oakmore » Ridge National Laboratory in order to provide value to investigators from government agencies, academic institutions, and industry entities. The described computing environment also adheres to the recently instituted digital data management plan mandated by multiple US government agencies, which involves all stages of the digital data life cycle including capture, analysis, sharing, and preservation. It particularly focuses on the sharing and preservation of digital research data. The details of this computing environment are explained within the context of cloud services by the three layer classification of Software as a Service , Platform as a Service , and Infrastructure as a Service .« less

The Other Infrastructure: Distance Education's Digital Plant.

ERIC Educational Resources Information Center

Boettcher, Judith V.; Kumar, M. S. Vijay

2000-01-01

Suggests a new infrastructure--the digital plant--for supporting flexible Web campus environments. Describes four categories which make up the infrastructure: personal communication tools and applications; network of networks for the Web campus; dedicated servers and software applications; software applications and services from external…

Computer Graphics Instruction in VizClass

ERIC Educational Resources Information Center

Grimes, Douglas; Warschauer, Mark; Hutchinson, Tara; Kuester, Falko

2005-01-01

"VizClass" is a university classroom environment designed to offer students in computer graphics and engineering courses up-to-date visualization technologies. Three digital whiteboards and a three-dimensional stereoscopic display provide complementary display surfaces. Input devices include touchscreens on the digital whiteboards, remote…

Physical and digital simulations for IVA robotics

NASA Technical Reports Server (NTRS)

Hinman, Elaine; Workman, Gary L.

1992-01-01

Space based materials processing experiments can be enhanced through the use of IVA robotic systems. A program to determine requirements for the implementation of robotic systems in a microgravity environment and to develop some preliminary concepts for acceleration control of small, lightweight arms has been initiated with the development of physical and digital simulation capabilities. The physical simulation facilities incorporate a robotic workcell containing a Zymark Zymate II robot instrumented for acceleration measurements, which is able to perform materials transfer functions while flying on NASA's KC-135 aircraft during parabolic manuevers to simulate reduced gravity. Measurements of accelerations occurring during the reduced gravity periods will be used to characterize impacts of robotic accelerations in a microgravity environment in space. Digital simulations are being performed with TREETOPS, a NASA developed software package which is used for the dynamic analysis of systems with a tree topology. Extensive use of both simulation tools will enable the design of robotic systems with enhanced acceleration control for use in the space manufacturing environment.

Engaging patients with digital tools: what we think we know.

PubMed

Fox, Brent I; Felkey, Bill G

2014-11-01

Patients who are engaged in their own care have better outcomes and cost the health care system less money. Creating the environment that supports patient engagement has been a recent focus across the United States, and digital tools have been suggested as an important piece of patient engagement. We discuss what we think we know about digital engagement, and present data of what is actually occurring.

Access Control to Information in Pervasive Computing Environments

DTIC Science & Technology

2005-08-01

for foo’s public key. (Digital signatures are omitted.) indicate a set of location and time intervals. A service will return location information only...stands for foo’s public key. (Digital signatures are omitted.) it describes the resource to which access is granted. Currently, we allow only resources...information relationship. Alice’s location information is bun- dled in her personal information. (The digital signature is omitted.) We use extended

Comparison of speech recognition with adaptive digital and FM remote microphone hearing assistance technology by listeners who use hearing aids.

PubMed

Thibodeau, Linda

2014-06-01

The purpose of this study was to compare the benefits of 3 types of remote microphone hearing assistance technology (HAT), adaptive digital broadband, adaptive frequency modulation (FM), and fixed FM, through objective and subjective measures of speech recognition in clinical and real-world settings. Participants included 11 adults, ages 16 to 78 years, with primarily moderate-to-severe bilateral hearing impairment (HI), who wore binaural behind-the-ear hearing aids; and 15 adults, ages 18 to 30 years, with normal hearing. Sentence recognition in quiet and in noise and subjective ratings were obtained in 3 conditions of wireless signal processing. Performance by the listeners with HI when using the adaptive digital technology was significantly better than that obtained with the FM technology, with the greatest benefits at the highest noise levels. The majority of listeners also preferred the digital technology when listening in a real-world noisy environment. The wireless technology allowed persons with HI to surpass persons with normal hearing in speech recognition in noise, with the greatest benefit occurring with adaptive digital technology. The use of adaptive digital technology combined with speechreading cues would allow persons with HI to engage in communication in environments that would have otherwise not been possible with traditional wireless technology.

The tracking performance of distributed recoverable flight control systems subject to high intensity radiated fields

NASA Astrophysics Data System (ADS)

Wang, Rui

It is known that high intensity radiated fields (HIRF) can produce upsets in digital electronics, and thereby degrade the performance of digital flight control systems. Such upsets, either from natural or man-made sources, can change data values on digital buses and memory and affect CPU instruction execution. HIRF environments are also known to trigger common-mode faults, affecting nearly-simultaneously multiple fault containment regions, and hence reducing the benefits of n-modular redundancy and other fault-tolerant computing techniques. Thus, it is important to develop models which describe the integration of the embedded digital system, where the control law is implemented, as well as the dynamics of the closed-loop system. In this dissertation, theoretical tools are presented to analyze the relationship between the design choices for a class of distributed recoverable computing platforms and the tracking performance degradation of a digital flight control system implemented on such a platform while operating in a HIRF environment. Specifically, a tractable hybrid performance model is developed for a digital flight control system implemented on a computing platform inspired largely by the NASA family of fault-tolerant, reconfigurable computer architectures known as SPIDER (scalable processor-independent design for enhanced reliability). The focus will be on the SPIDER implementation, which uses the computer communication system known as ROBUS-2 (reliable optical bus). A physical HIRF experiment was conducted at the NASA Langley Research Center in order to validate the theoretical tracking performance degradation predictions for a distributed Boeing 747 flight control system subject to a HIRF environment. An extrapolation of these results for scenarios that could not be physically tested is also presented.

Digital pathology in clinical use: where are we now and what is holding us back?

PubMed

Griffin, Jon; Treanor, Darren

2017-01-01

Whole slide imaging is being used increasingly in research applications and in frozen section, consultation and external quality assurance practice. Digital pathology, when integrated with other digital tools such as barcoding, specimen tracking and digital dictation, can be integrated into the histopathology workflow, from specimen accession to report sign-out. These elements can bring about improvements in the safety, quality and efficiency of a histopathology department. The present paper reviews the evidence for these benefits. We then discuss the challenges of implementing a fully digital pathology workflow, including the regulatory environment, validation of whole slide imaging and the evidence for the design of a digital pathology workstation. © 2016 John Wiley & Sons Ltd.

Comparison of Two Digital Stethoscopes with the Traditional Stethoscope Used on International Space Station

NASA Technical Reports Server (NTRS)

Rasbury, Jack; Bascal, Kira; Ownby, Matt; McCulley, Phyllis; Paul, Bonnie

2004-01-01

A traditional stethoscope is currently flown on the International Space Station (ISS). The background noise on the ISS is much higher than a normal exam room, and the literature shows that traditional stethoscopes are unable to function effectively in high noise environments. Digital stethoscopes provide amplification which improves the audibility in a quiet environment. This study is designed to determine if digital stethoscopes offer any advantage over traditional stethoscopes in being able to identify normal and abnormal sounds in the ISS noise environment. Methods: An ISS noise simulation facility was created to reproduce ISS noise profiles by modifying pink noise with a software-based graphic equalizer. The files were played in a continuous loop on a computer, amplified through a high-end stereo system and adjusted using a sound level meter. Nine caregiver analogues were given the same auscultation lesson received by astronauts. They began testing by becoming familiar with normal and abnormal sounds on a Student Auscultation Manikin . They then used two digital stethoscopes and a traditional stethoscope identical to the one flown on the ISS to auscultate the manikin sounds in the noise facility. They identified the sounds on a questionnaire and picked which of the three stethoscopes they preferred. Results: Evaluators displayed equivalent accuracy in sound identification when using either the 3M model 4000 digital stethoscope or traditional stethoscope. However, the 3M was preferred 2 to 1 by the evaluators, primarily because of additional amplification of the sounds. Discussion: Although our results show that the current ISS stethoscope and the "best-of-breed" digital stethoscope provide essentially the same auscultation utility, the latter has the advantage of recording and transmitting sounds to a remote physician. Since the astronaut caregivers are non-physiCians, this capability may be worth the additional expense and effort needed to certify the digital stethoscope for flight.

Crafting a positive professional digital profile to augment your practice

PubMed Central

Kraakevik, Jeff

2016-01-01

Abstract A digital profile is the sum content about a person on the Internet. A digital profile can be composed of personal or professional information shared on public Web sites posted personally or by others. One of the most effective ways to build a positive professional digital profile is through social media. It is increasingly important to maintain a positive digital profile as others mine the Internet to find out about a professional prior to meeting him or her. As the digital environment continues to grow, it will become increasingly difficult to neglect a professional digital profile without potential negative consequences. There are many benefits to creating a digital presence and using the tools available to learn about neurology and interact with other professionals and patients in ways that were not possible in the past. The spread of social media to a large part of the population makes it unlikely to go away. PMID:29443275

Crafting a positive professional digital profile to augment your practice.

PubMed

Kraakevik, Jeff

2016-02-01

A digital profile is the sum content about a person on the Internet. A digital profile can be composed of personal or professional information shared on public Web sites posted personally or by others. One of the most effective ways to build a positive professional digital profile is through social media. It is increasingly important to maintain a positive digital profile as others mine the Internet to find out about a professional prior to meeting him or her. As the digital environment continues to grow, it will become increasingly difficult to neglect a professional digital profile without potential negative consequences. There are many benefits to creating a digital presence and using the tools available to learn about neurology and interact with other professionals and patients in ways that were not possible in the past. The spread of social media to a large part of the population makes it unlikely to go away.

The integration of digital orthophotographs with GISs in a microcomputer environment

NASA Technical Reports Server (NTRS)

Steiner, David R.

1992-01-01

The issues involved in the use of orthoimages as a data source for GIS databases are examined. The integration of digital photographs into a GIS is discussed. A prototype PC-based program for the production of GIS databases using orthoimages is described.

Learning Design and Inquiry in Australian History Classrooms

ERIC Educational Resources Information Center

Carroll, Kay

2012-01-01

Global and digital connectivity transform Australian classrooms by creating rich environments for inquiry learning. Developing inquiry learning in this Information Communication Technology (ICT) context is an Australian educational goal. Recently the Australian Curriculum reform and the Digital Education Revolution has become a catalyst for…

Digital Literacy and Netiquette: Awareness and Perception in EFL Learning Context

ERIC Educational Resources Information Center

Nia, Sara Farshad; Marandi, Susan

2014-01-01

With the growing popularity of digital technologies and computer-mediated communication (CMC), various types of interactive communication technology are being increasingly integrated into foreign/second language learning environments. Nevertheless, due to its nature, online communication is susceptible to misunderstandings and miscommunications,…

Digital Privacy: Toward a New Politics and Discursive Practice.

ERIC Educational Resources Information Center

Doty, Philip

2001-01-01

Discussion of privacy focuses on digital environments and a more inclusive understanding of privacy. Highlights include legal and policy conceptions; legislation protecting privacy; relevant Supreme Court cases; torts and privacy; European and other efforts; surveillance and social control; information entrepreneurialism; Jurgen Habermas; free…

Research on the digital education resources of sharing pattern in independent colleges based on cloud computing environment

NASA Astrophysics Data System (ADS)

Xiong, Ting; He, Zhiwen

2017-06-01

Cloud computing was first proposed by Google Company in the United States, which was based on the Internet center, providing a standard and open network sharing service approach. With the rapid development of the higher education in China, the educational resources provided by colleges and universities had greatly gap in the actual needs of teaching resources. therefore, Cloud computing of using the Internet technology to provide shared methods liked the timely rain, which had become an important means of the Digital Education on sharing applications in the current higher education. Based on Cloud computing environment, the paper analyzed the existing problems about the sharing of digital educational resources in Jiangxi Province Independent Colleges. According to the sharing characteristics of mass storage, efficient operation and low input about Cloud computing, the author explored and studied the design of the sharing model about the digital educational resources of higher education in Independent College. Finally, the design of the shared model was put into the practical applications.

Single-shot full resolution region-of-interest (ROI) reconstruction in image plane digital holographic microscopy

NASA Astrophysics Data System (ADS)

Singh, Mandeep; Khare, Kedar

2018-05-01

We describe a numerical processing technique that allows single-shot region-of-interest (ROI) reconstruction in image plane digital holographic microscopy with full pixel resolution. The ROI reconstruction is modelled as an optimization problem where the cost function to be minimized consists of an L2-norm squared data fitting term and a modified Huber penalty term that are minimized alternately in an adaptive fashion. The technique can provide full pixel resolution complex-valued images of the selected ROI which is not possible to achieve with the commonly used Fourier transform method. The technique can facilitate holographic reconstruction of individual cells of interest from a large field-of-view digital holographic microscopy data. The complementary phase information in addition to the usual absorption information already available in the form of bright field microscopy can make the methodology attractive to the biomedical user community.

Color management systems: methods and technologies for increased image quality

NASA Astrophysics Data System (ADS)

Caretti, Maria

1997-02-01

All the steps in the imaging chain -- from handling the originals in the prepress to outputting them on any device - - have to be well calibrated and adjusted to each other, in order to reproduce color images in a desktop environment as accurate as possible according to the original. Today most of the steps in the prepress production are digital and therefore it is realistic to believe that the color reproduction can be well controlled. This is true thanks to the last years development of fast, cost effective scanners, digital sources and digital proofing devices not the least. It is likely to believe that well defined tools and methods to control this imaging flow will lead to large cost and time savings as well as increased overall image quality. Until now, there has been a lack of good, reliable, easy-to- use systems (e.g. hardware, software, documentation, training and support) in an extent that has made them accessible to the large group of users of graphic arts production systems. This paper provides an overview of the existing solutions to manage colors in a digital pre-press environment. Their benefits and limitations are discussed as well as how they affect the production workflow and organization. The difference between a color controlled environment and one that is not is explained.

Enhancing children's health through digital story.

PubMed

Wyatt, Tami H; Hauenstein, Emily

2008-01-01

Stories in all of their many forms, including books, plays, skits, movies, poems, and songs, appeal to individuals of all ages but especially the young. Children are easily engaged in stories, and today's generation of children, the millennium generation, demands interactive, multimedia-rich environments. Story as a teaching and learning technique is pervasive in the classroom but is infrequently used to promote health. Because of advancing technology, it is possible to create interactive digital storytelling programs that teach children health topics. Using digital storytelling in an interactive environment to promote health has not been tested, but there is empirical support for using story in health education and interactive technology to promote health. This article briefly reviews the literature and discusses how technology and storytelling can be joined to promote positive health outcomes.

Using Wikis as a Support and Assessment Tool in Collaborative Digital Game-Based Learning Environments

ERIC Educational Resources Information Center

Samur, Yavuz

2011-01-01

In computer-supported collaborative learning (CSCL) environments, there are many researches done on collaborative learning activities; however, in game-based learning environments, more research and literature on collaborative learning activities are required. Actually, both game-based learning environments and wikis enable us to use new chances…

Digital pulse processing in Mössbauer spectroscopy

NASA Astrophysics Data System (ADS)

Veiga, A.; Grunfeld, C. M.

2014-04-01

In this work we present some advances towards full digitization of the detection subsystem of a Mössbauer transmission spectrometer. We show how, using adequate instrumentation, preamplifier output of a proportional counter can be digitized with no deterioration in spectrum quality, avoiding the need of a shaping amplifier. A pipelined architecture is proposed for a digital processor, which constitutes a versatile platform for the development of pulse processing techniques. Requirements for minimization of the analog processing are considered and experimental results are presented.

User guide for the digital control system of the NASA/Langley Research Center's 13-inch Magnetic Suspension and Balance System

NASA Technical Reports Server (NTRS)

Britcher, Colin P.

1987-01-01

The technical background to the development of the digital control system of the NASA/Langley Research Center's 13 inch Magnetic Supension and Balance Systen (MSBS) is reviewed. The implementation of traditional MSBS control algorithms in digital form is examined. Extensive details of the 13-inch MSBS digital controller and related hardware are given, together with the introductory instructions for systems operators. Full listings of software are included in the Appendices.

Modified signed-digit arithmetic based on redundant bit representation.

PubMed

Huang, H; Itoh, M; Yatagai, T

1994-09-10

Fully parallel modified signed-digit arithmetic operations are realized based on redundant bit representation of the digits proposed. A new truth-table minimizing technique is presented based on redundant-bitrepresentation coding. It is shown that only 34 minterms are enough for implementing one-step modified signed-digit addition and subtraction with this new representation. Two optical implementation schemes, correlation and matrix multiplication, are described. Experimental demonstrations of the correlation architecture are presented. Both architectures use fixed minterm masks for arbitrary-length operands, taking full advantage of the parallelism of the modified signed-digit number system and optics.

Ecosystems in the Learning Environment

ERIC Educational Resources Information Center

Louviere, Gregory

2011-01-01

Habitats, ecology and evolution are a few of the many metaphors commonly associated with the domain of biological ecosystems. Surprisingly, these and other similar biological metaphors are proving to be equally associated with a phenomenon known as digital ecosystems. Digital ecosystems make a direct connection between biological properties and…

Integrating Data across Digital Activities

ERIC Educational Resources Information Center

DiCerbo, Kristen

2016-01-01

The volume of data that can be captured and stored from students' everyday interactions with digital environments allows for the creation of models of student knowledge, skills, and attributes unobtrusively. However, models and techniques for transforming these data into information that is useful for educators have not been established. This…

Digital Image Manipulation and Avatar Configuration: Implications for Inclusive Classrooms

ERIC Educational Resources Information Center

Oravec, Jo Ann

2012-01-01

This paper outlines concerns for inclusive classrooms involving personal digital image modifications and selections, as well as avatar configurations. Classroom interactions incorporate various dimensions of personal appearance; however, educators try to make them primarily about knowledge and wisdom. Students in environments where they can…

Digital Pen and Paper Technology as a Means of Classroom Administration Relief

NASA Astrophysics Data System (ADS)

Broer, Jan; Wendisch, Tim; Willms, Nina

This paper contains the results of the Mobile Tools for Teachers project concerning the viability of digital pen and paper technology (DPPT) for administration in a K-12 classroom environment. Filled out forms were evaluated and interviews as well as user tests with teachers were done to show the advantages and disadvantages of DPPT compared to regular methods for attendance tracking and grading. Additionally, the paper addresses the problems that arise with DPPT in a classroom environment and includes suggestions how to deal with those.

Information technology in the foxhole.

PubMed

Eyestone, S M

1995-08-01

The importance of digital data capture at the point of health care service within the military environment is highlighted. Current paper-based data capture does not allow for efficient data reuse throughout the medical support information domain. A simple, high-level process and data flow model is used to demonstrate the importance of data capture at point of service. The Department of Defense is developing a personal digital assistant, called MEDTAG, that accomplishes point of service data capture in the field using a prototype smart card as a data store in austere environments.

Development of high-rise buildings: digitalization of life cycle management

NASA Astrophysics Data System (ADS)

Gusakova, Elena

2018-03-01

The analysis of the accumulated long-term experience in the construction and operation of high-rise buildings reveals not only the engineering specificity of such projects, but also systemic problems in the field of project management. Most of the project decisions are made by the developer and the investor in the early stages of the life cycle - from the acquisition of the site to the start of operation, so most of the participants in the construction and operation of the high-rise building are far from the strategic life-cycle management of the project. The solution of these tasks due to the informatization of management has largely exhausted its efficiency resource. This is due to the fact that the applied IT-systems automated traditional "inherited" processes and management structures, and, in addition, they were focused on informatization of the activities of the construction company, rather than the construction project. Therefore, in the development of high-rise buildings, the tasks of researching approaches and methods for managing the full life cycle of projects that will improve their competitiveness become topical. For this purpose, the article substantiates the most promising approaches and methods of informational modeling of high-rise construction as a basis for managing the full life cycle of this project. Reengineering of information interaction schemes for project participants is considered; formation of a unified digital environment for the life cycle of the project; the development of systems for integrating data management and project management.

Building the Digital Library Infrastructure: A Primer.

ERIC Educational Resources Information Center

Tebbetts, Diane R.

1999-01-01

Provides a framework for examining the complex infrastructure needed to successfully implement a digital library. Highlights include database development, online public-access catalogs, interactive technical services, full-text documents, hardware and wiring, licensing, access, and security issues. (Author/LRW)

47 CFR 301.1 - Program purposes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Telecommunication NATIONAL TELECOMMUNICATIONS AND INFORMATION ADMINISTRATION, DEPARTMENT OF COMMERCE DIGITAL-TO... boxes. After February 17, 2009, the Federal Communications Commission will require that all full-power television stations in the United States broadcast using digital television technology. Consumers who wish to...

Adaptive Practice: Next Generation Evidence-Based Practice in Digital Environments.

PubMed

Kennedy, Margaret Ann

2016-01-01

Evidence-based practice in nursing is considered foundational to safe, competent care. To date, rigid traditional perceptions of what constitutes 'evidence' have constrained the recognition and use of practice-based evidence and the exploitation of novel forms of evidence from data rich environments. Advancements such as the conceptualization of clinical intelligence, the prevalence of increasingly sophisticated digital health information systems, and the advancement of the Big Data phenomenon have converged to generate a new contemporary context. In today's dynamic data-rich environments, clinicians have new sources of valid evidence, and need a new paradigm supporting clinical practice that is adaptive to information generated by diverse electronic sources. This opinion paper presents adaptive practice as the next generation of evidence-based practice in contemporary evidence-rich environments and provides recommendations for the next phase of evolution.

Digital expression among urban, low-income African American adolescents.

PubMed

Baker, Christina M; Staiano, Amanda E; Calvert, Sandra L

2011-01-01

Digital production is a means through which African American adolescents communicate and express their experiences with peers. This study examined the content and the form of the digital productions of 24 urban, low-income African American adolescents who attended a summer academic program. The content of student digital productions focused on academic experiences and friendships. Their production styles revealed that youth used perceptually salient production features, such as rapid scene changes and loud rap music. The results suggest that when placed in a supportive, academic environment and provided with digital production resources, students who traditionally face barriers due to cultural and economic inequalities digitally express to their peers an interest in academics and positive peer relationships, and that these youth communicate their experiences through a shared production style that reflects their broader cultural experiences.

Development of a synchrotron biaxial tensile device for in situ characterization of thin films mechanical response.

PubMed

Geandier, G; Thiaudière, D; Randriamazaoro, R N; Chiron, R; Djaziri, S; Lamongie, B; Diot, Y; Le Bourhis, E; Renault, P O; Goudeau, P; Bouaffad, A; Castelnau, O; Faurie, D; Hild, F

2010-10-01

We have developed on the DIFFABS-SOLEIL beamline a biaxial tensile machine working in the synchrotron environment for in situ diffraction characterization of thin polycrystalline films mechanical response. The machine has been designed to test compliant substrates coated by the studied films under controlled, applied strain field. Technological challenges comprise the sample design including fixation of the substrate ends, the related generation of a uniform strain field in the studied (central) volume, and the operations from the beamline pilot. Preliminary tests on 150 nm thick W films deposited onto polyimide cruciform substrates are presented. The obtained results for applied strains using x-ray diffraction and digital image correlation methods clearly show the full potentialities of this new setup.

Rethinking Teaching in STEM Education in a Community College: Role of Instructional Consultation and Digital Technologies

NASA Astrophysics Data System (ADS)

Kurland, Shelley Chih-Hsian

Community college faculty members educate almost half of all U.S. undergraduates, who are often more diverse and more academically underprepared when compared to undergraduate students who attend four-year institutions. In addition, faculty members in community colleges are facing increased accountability for meeting student learning outcomes, expectations to adjust their teaching practices to include active learning practices, and expectations to incorporate more technologies into the classroom. Faculty developers are one of the support structures that faculty members can look to in order to meet those challenges. A survey of literature in faculty development suggests that instructional consultation can play an important role in shaping and transforming teaching practices. Hence, this action research study examined my work using instructional consulting with four full-time STEM faculty colleagues in order to examine and shape their teaching practices with and without the use of digital technologies. The two foci of the research, examining shifts in faculty participants' teaching practices, and my instructional consulting practices, were informed by Thomas and Brown's (2011) social view of learning and the concept of teaching and learning in a "co-learning" environment. Two dominant factors emerged regarding faculty participants' shift in teaching practices. These factors concerned: 1) the perception of control and 2) individual faculty participant's comfort level, expectations, and readiness. In addition to these two dominant factors, the instructional consultation process also supported a range of shifts in either mindset and/or teaching practices. My analysis showed that the use of digital technologies was not an essential factor in shifting faculty participant mindset and/or teaching practices, instead digital technologies were used to enhance the teaching process and students' learning experiences.

Shape and 3D acoustically induced vibrations of the human eardrum characterized by digital holography

NASA Astrophysics Data System (ADS)

Khaleghi, Morteza; Furlong, Cosme; Cheng, Jeffrey Tao; Rosowski, John J.

2014-07-01

The eardrum or Tympanic Membrane (TM) transfers acoustic energy from the ear canal (at the external ear) into mechanical motions of the ossicles (at the middle ear). The acousto-mechanical-transformer behavior of the TM is determined by its shape and mechanical properties. For a better understanding of hearing mysteries, full-field-of-view techniques are required to quantify shape, nanometer-scale sound-induced displacement, and mechanical properties of the TM in 3D. In this paper, full-field-of-view, three-dimensional shape and sound-induced displacement of the surface of the TM are obtained by the methods of multiple wavelengths and multiple sensitivity vectors with lensless digital holography. Using our developed digital holographic systems, unique 3D information such as, shape (with micrometer resolution), 3D acoustically-induced displacement (with nanometer resolution), full strain tensor (with nano-strain resolution), 3D phase of motion, and 3D directional cosines of the displacement vectors can be obtained in full-field-ofview with a spatial resolution of about 3 million points on the surface of the TM and a temporal resolution of 15 Hz.

Telling Stories Digitally: An Experiment with Preschool Children

ERIC Educational Resources Information Center

Kocaman-Karoglu, Aslihan

2015-01-01

With the emergence of the new technologies, twenty-first-century learning involves the application of new media in educational environments. Digital storytelling (DST) is a method that blends traditional storytelling with new technologies. This study was designed to compare the conceptual understanding of preschool students in DST classrooms with…

Taxonomies, Folksonomies, and Semantics: Establishing Functional Meaning in Navigational Structures

ERIC Educational Resources Information Center

Bacha, Jeffrey A.

2012-01-01

This article argues for the establishment of a usability process that incorporates the study of "words" and "word phrases." It demonstrates how semantically mapping a navigational taxonomy can help the developers of digital environments establish a more focused sense of functional meaning for the users of their digital designs.

A Virtual Laboratory for Digital Signal Processing

ERIC Educational Resources Information Center

Dow, Chyi-Ren; Li, Yi-Hsung; Bai, Jin-Yu

2006-01-01

This work designs and implements a virtual digital signal processing laboratory, VDSPL. VDSPL consists of four parts: mobile agent execution environments, mobile agents, DSP development software, and DSP experimental platforms. The network capability of VDSPL is created by using mobile agent and wrapper techniques without modifying the source code…

The Digital School Library: A World-Wide Development and a Fascinating Challenge.

ERIC Educational Resources Information Center

Loertscher, David

2003-01-01

Explores the academic environment of a total information system for school libraries based on the idea of a digital intranet. Discusses safety; customization; the core library collection; curriculum-specific collections; access to short-term resources; Internet access; personalized features; search engines; equity issues; and staffing. (LRW)

eSports Gaming and You

ERIC Educational Resources Information Center

Engerman, Jason A.; Hein, Robert J.

2017-01-01

Digital gaming communities are nuanced and developing. The eSports community has advanced in noticeable ways and represents the highest form of online competitive play for digital gaming environments. Due to the high stakes nature of eSports, its participants sit on the very edge of strategic planning boundaries and push the ceiling of…

Teaching Critical Analytical Methods in the Digital Typography Classroom.

ERIC Educational Resources Information Center

Gibson, Michael

1997-01-01

Describes a studio project designed to help students (1) utilize the digital environment to organize typography and images that represent the socio-political context their solutions were required to identify; and (2) explore the empirical variables that help readers to access and contemplate the content presented by their text. (PA)

"It's All about Standardisation"--Exploring the Digital (Re)Configuration of School Management and Administration

ERIC Educational Resources Information Center

Selwyn, Neil

2011-01-01

Schools have long made use of digital technologies to support the co-ordination of management and administrative processes--not least "management information systems", "virtual learning environments" and other "institutional technologies". The last five years have seen the convergence of these technologies into…

The Motif of Meeting in Digital Education

ERIC Educational Resources Information Center

Sheail, Philippa

2015-01-01

This article draws on theoretical work which considers the composition of meetings, in order to think about the form of the meeting in digital environments for higher education. To explore the motif of meeting, I undertake a "compositional interpretation" (Rose, 2012) of the default interface offered by "Collaborate", an…

Convergence in full motion video processing, exploitation, and dissemination and activity based intelligence

NASA Astrophysics Data System (ADS)

Phipps, Marja; Lewis, Gina

2012-06-01

Over the last decade, intelligence capabilities within the Department of Defense/Intelligence Community (DoD/IC) have evolved from ad hoc, single source, just-in-time, analog processing; to multi source, digitally integrated, real-time analytics; to multi-INT, predictive Processing, Exploitation and Dissemination (PED). Full Motion Video (FMV) technology and motion imagery tradecraft advancements have greatly contributed to Intelligence, Surveillance and Reconnaissance (ISR) capabilities during this timeframe. Imagery analysts have exploited events, missions and high value targets, generating and disseminating critical intelligence reports within seconds of occurrence across operationally significant PED cells. Now, we go beyond FMV, enabling All-Source Analysts to effectively deliver ISR information in a multi-INT sensor rich environment. In this paper, we explore the operational benefits and technical challenges of an Activity Based Intelligence (ABI) approach to FMV PED. Existing and emerging ABI features within FMV PED frameworks are discussed, to include refined motion imagery tools, additional intelligence sources, activity relevant content management techniques and automated analytics.

Digital disaster evaluation and its application to 2015 Ms 8.1 Nepal Earthquake

NASA Astrophysics Data System (ADS)

WANG, Xiaoqing; LV, Jinxia; DING, Xiang; DOU, Aixia

2016-11-01

The purpose of the article is to probe the technique resolution of disaster information extraction and evaluation from the digital RS images based on the internet environment and aided by the social and geographic information. The solution is composed with such methods that the fast post-disaster assessment system will assess automatically the disaster area and grade, the multi-phase satellite and airborne high resolution digital RS images will provide the basis to extract the disaster areas or spots, assisted by the fast position of potential serious damage risk targets according to the geographic, administrative, population, buildings and other information in the estimated disaster region, the 2D digital map system or 3D digital earth system will provide platforms to interpret cooperatively the damage information in the internet environment, and further to estimate the spatial distribution of damage index or intensity, casualties or economic losses, which are very useful for the decision-making of emergency rescue and disaster relief, resettlement and reconstruction. The spatial seismic damage distribution of 2015 Ms 8.1 Nepal earthquake, as an example of the above solution, is evaluated by using the high resolution digital RS images, auxiliary geographic information and ground survey. The results are compared with the statistical disaster information issued by the ground truth by field surveying, and show good consistency.

A Cultural Evolution Approach to Digital Media.

PubMed

Acerbi, Alberto

2016-01-01

Digital media have today an enormous diffusion, and their influence on the behavior of a vast part of the human population can hardly be underestimated. In this review I propose that cultural evolution theory, including both a sophisticated view of human behavior and a methodological attitude to modeling and quantitative analysis, provides a useful framework to study the effects and the developments of media in the digital age. I will first give a general presentation of the cultural evolution framework, and I will then introduce this more specific research program with two illustrative topics. The first topic concerns how cultural transmission biases, that is, simple heuristics such as "copy prestigious individuals" or "copy the majority," operate in the novel context of digital media. The existence of transmission biases is generally justified with their adaptivity in small-scale societies. How do they operate in an environment where, for example, prestigious individuals possess not-relevant skills, or popularity is explicitly quantified and advertised? The second aspect relates to fidelity of cultural transmission. Digitally-mediated interactions support cheap and immediate high-fidelity transmission, in opposition, for example, to oral traditions. How does this change the content that is more likely to spread? Overall, I suggest the usefulness of a "long view" to our contemporary digital environment, contextualized in cognitive science and cultural evolution theory, and I discuss how this perspective could help us to understand what is genuinely new and what is not.

Exploration of operator method digital optical computers for application to NASA

NASA Technical Reports Server (NTRS)

1990-01-01

Digital optical computer design has been focused primarily towards parallel (single point-to-point interconnection) implementation. This architecture is compared to currently developing VHSIC systems. Using demonstrated multichannel acousto-optic devices, a figure of merit can be formulated. The focus is on a figure of merit termed Gate Interconnect Bandwidth Product (GIBP). Conventional parallel optical digital computer architecture demonstrates only marginal competitiveness at best when compared to projected semiconductor implements. Global, analog global, quasi-digital, and full digital interconnects are briefly examined as alternative to parallel digital computer architecture. Digital optical computing is becoming a very tough competitor to semiconductor technology since it can support a very high degree of three dimensional interconnect density and high degrees of Fan-In without capacitive loading effects at very low power consumption levels.

Introducing students to digital geological mapping: A workflow based on cheap hardware and free software

NASA Astrophysics Data System (ADS)

Vrabec, Marko; Dolžan, Erazem

2016-04-01

The undergraduate field course in Geological Mapping at the University of Ljubljana involves 20-40 students per year, which precludes the use of specialized rugged digital field equipment as the costs would be way beyond the capabilities of the Department. A different mapping area is selected each year with the aim to provide typical conditions that a professional geologist might encounter when doing fieldwork in Slovenia, which includes rugged relief, dense tree cover, and moderately-well- to poorly-exposed bedrock due to vegetation and urbanization. It is therefore mandatory that the digital tools and workflows are combined with classical methods of fieldwork, since, for example, full-time precise GNSS positioning is not viable under such circumstances. Additionally, due to the prevailing combination of complex geological structure with generally poor exposure, students cannot be expected to produce line (vector) maps of geological contacts on the go, so there is no need for such functionality in hardware and software that we use in the field. Our workflow therefore still relies on paper base maps, but is strongly complemented with digital tools to provide robust positioning, track recording, and acquisition of various point-based data. Primary field hardware are students' Android-based smartphones and optionally tablets. For our purposes, the built-in GNSS chips provide adequate positioning precision most of the time, particularly if they are GLONASS-capable. We use Oruxmaps, a powerful free offline map viewer for the Android platform, which facilitates the use of custom-made geopositioned maps. For digital base maps, which we prepare in free Windows QGIS software, we use scanned topographic maps provided by the National Geodetic Authority, but also other maps such as aerial imagery, processed Digital Elevation Models, scans of existing geological maps, etc. Point data, like important outcrop locations or structural measurements, are entered into Oruxmaps as waypoints. Students are also encouraged to directly measure structural data with specialized Android apps such as the MVE FieldMove Clino. Digital field data is exported from Oruxmaps to Windows computers primarily in the ubiquitous GPX data format and then integrated in the QGIS environment. Recorded GPX tracks are also used with the free Geosetter Windows software to geoposition and tag any digital photographs taken in the field. With minimal expenses, our workflow provides the students with basic familiarity and experience in using digital field tools and methods. The workflow is also practical enough for the prevailing field conditions of Slovenia that the faculty staff is using it in geological mapping for scientific research and consultancy work.

Digital photography

PubMed Central

Windsor, J S; Rodway, G W; Middleton, P M; McCarthy, S

2006-01-01

Objective The emergence of a new generation of “point‐and‐shoot” digital cameras offers doctors a compact, portable and user‐friendly solution to the recording of highly detailed digital photographs and video images. This work highlights the use of such technology, and provides information for those who wish to record, store and display their own medical images. Methods Over a 3‐month period, a digital camera was carried by a doctor in a busy, adult emergency department and used to record a range of clinical images that were subsequently transferred to a computer database. Results In total, 493 digital images were recorded, of which 428 were photographs and 65 were video clips. These were successfully used for teaching purposes, publications and patient records. Conclusions This study highlights the importance of informed consent, the selection of a suitable package of digital technology and the role of basic photographic technique in developing a successful digital database in a busy clinical environment. PMID:17068281

Consequences of "going digital" for pathology professionals - entering the cloud.

PubMed

Laurinavicius, Arvydas; Raslavicus, Paul

2012-01-01

New opportunities and the adoption of digital technologies will transform the way pathology professionals and services work. Many areas of our daily life as well as medical professions have experienced this change already which has resulted in a paradigm shift in many activities. Pathology is an image-based discipline, therefore, arrival of digital imaging into this domain promises major shift in our work and required mentality. Recognizing the physical and digital duality of the pathology workflow, we can prepare for the imminent increase of the digital component, synergize and enjoy its benefits. Development of a new generation of laboratory information systems along with seamless integration of digital imaging, decision-support, and knowledge databases will enable pathologists to work in a distributed environment. The paradigm of "cloud pathology" is proposed as an ultimate vision of digital pathology workstations plugged into the integrated multidisciplinary patient care systems.

Exploring digital professionalism.

PubMed

Ellaway, Rachel H; Coral, Janet; Topps, David; Topps, Maureen

2015-01-01

The widespread use of digital media (both computing devices and the services they access) has blurred the boundaries between our personal and professional lives. Contemporary students are the last to remember a time before the widespread use of the Internet and they will be the first to practice in a largely e-health environment. This article explores concepts of digital professionalism and their place in contemporary medical education, and proposes a series of principles of digital professionalism to guide teaching, learning and practice in the healthcare professions. Despite the many risks and fears surrounding their use, digital media are not an intrinsic threat to medical professionalism. Professionals should maintain the capacity for deliberate, ethical, and accountable practice when using digital media. The authors describe a digital professionalism framework structured around concepts of proficiency, reputation, and responsibility. Digital professionalism can be integrated into medical education using strategies based on awareness, alignment, assessment, and accountability. These principles of digital professionalism provide a way for medical students and medical practitioners to embrace the positive aspects of digital media use while being mindful and deliberate in its use to avoid or minimize any negative consequences.

Impact of digital intraoral scan strategies on the impression accuracy using the TRIOS Pod scanner.

PubMed

Müller, Philipp; Ender, Andreas; Joda, Tim; Katsoulis, Joannis

2016-04-01

Little information is available on the impact of different scan strategies on the accuracy of full-arch scans with intraoral scanners. The aim of this in-vitro study was to investigate the trueness and precision of full-arch maxillary digital impressions comparing three scan strategies. Three scan strategies (A, B, and C) were applied each five times on one single model (A, first buccal surfaces, return from occlusal-palatal; B, first occlusal-palatal, return buccal; C, S-type one-way). The TRIOS Pod scanner (3shape, Copenhagen, Denmark) with a color detector was used for these digital impressions. A cast of a maxillary dentate jaw was fabricated and scanned with an industrial reference scanner. This full-arch data record was digitally superimposed with the test scans (trueness) and within-group comparison was performed for each group (precision). The values within the 90/10 percentiles from the digital superimposition were used for calculation and group comparisons with nonparametric tests (ANOVA, post-hoc Bonferroni). The trueness (mean ± standard deviation) was 17.9 ± 16.4 μm for scan strategy A, 17.1 ± 13.7 μm for B, and 26.8 ± 14.7 μm for C without statistically significant difference. The precision was lowest for scan strategy A (35.0 ± 51.1 μm) and significantly different to B (7.9 ± 5.6 μm) and C (8.5 ± 6.3 μm). Scan strategy B may be recommended as it provides the highest trueness and precision in full-arch scans and therefore minimizes inaccuracies in the final reconstruction.

Developing tools for digital radar image data evaluation

NASA Technical Reports Server (NTRS)

Domik, G.; Leberl, F.; Raggam, J.

1986-01-01

The refinement of radar image analysis methods has led to a need for a systems approach to radar image processing software. Developments stimulated through satellite radar are combined with standard image processing techniques to create a user environment to manipulate and analyze airborne and satellite radar images. One aim is to create radar products for the user from the original data to enhance the ease of understanding the contents. The results are called secondary image products and derive from the original digital images. Another aim is to support interactive SAR image analysis. Software methods permit use of a digital height model to create ortho images, synthetic images, stereo-ortho images, radar maps or color combinations of different component products. Efforts are ongoing to integrate individual tools into a combined hardware/software environment for interactive radar image analysis.

Eyes on the prize: reflections on the impact of the evolving digital ecology on the librarian as expert intermediary and knowledge coach, 1969-2009.

PubMed

Homan, J Michael

2010-01-01

The 2009 Janet Doe Lecture reflects on the continuing value and increasing return on investment of librarian-mediated services in the constantly evolving digital ecology and complex knowledge environment of the health sciences. The interrelationship of knowledge, decision making based on knowledge, technology used to access and retrieve knowledge, and the important linkage roles of expert librarian intermediaries is examined. Professional experiences from 1969 to 2009, occurring during a time of unprecedented changes in the digital ecology of librarianship, are the base on which the evolving role and value of librarians as knowledge coaches and expert intermediaries are examined. Librarian-mediated services linking knowledge and critical decision making in health care have become more valuable than ever as technology continues to reshape an increasingly complex knowledge environment.

Environmental impacts of the emerging digital economy: the e-for-environment e-commerce?

PubMed

Sui, Daniel Z; Rejeski, David W

2002-02-01

The Internet-led digital economy is changing both the production and consumption patterns at the global scale. Although great potential exists to harness information technology in general and the Internet in particular and improve the environment, possible negative impacts of e-commerce on the environment should also be considered and dealt with. In this forum, we discuss both the potential positive and negative impacts of e-commerce. Drawing from insights gained from the complexity theory, we also delineate some broad contours for environmental policies in the information age. Given the paradoxical nature of technological innovations, we want to caution the scientific community and policymakers not to treat the Internet as the Holy Grail for environmental salvation.

Fake News

ERIC Educational Resources Information Center

Frederiksen, Linda

2017-01-01

In a politically and digitally polarized environment, identifying and evaluating fake news is more difficult than ever before. Librarians who have been teaching information and media literacy skills for decades understand the role we can and must play in this environment.

Precision of guided scanning procedures for full-arch digital impressions in vivo.

PubMed

Zimmermann, Moritz; Koller, Christina; Rumetsch, Moritz; Ender, Andreas; Mehl, Albert

2017-11-01

System-specific scanning strategies have been shown to influence the accuracy of full-arch digital impressions. Special guided scanning procedures have been implemented for specific intraoral scanning systems with special regard to the digital orthodontic workflow. The aim of this study was to evaluate the precision of guided scanning procedures compared to conventional impression techniques in vivo. Two intraoral scanning systems with implemented full-arch guided scanning procedures (Cerec Omnicam Ortho; Ormco Lythos) were included along with one conventional impression technique with irreversible hydrocolloid material (alginate). Full-arch impressions were taken three times each from 5 participants (n = 15). Impressions were then compared within the test groups using a point-to-surface distance method after best-fit model matching (OraCheck). Precision was calculated using the (90-10%)/2 quantile and statistical analysis with one-way repeated measures ANOVA and post hoc Bonferroni test was performed. The conventional impression technique with alginate showed the lowest precision for full-arch impressions with 162.2 ± 71.3 µm. Both guided scanning procedures performed statistically significantly better than the conventional impression technique (p < 0.05). Mean values for group Cerec Omnicam Ortho were 74.5 ± 39.2 µm and for group Ormco Lythos 91.4 ± 48.8 µm. The in vivo precision of guided scanning procedures exceeds conventional impression techniques with the irreversible hydrocolloid material alginate. Guided scanning procedures may be highly promising for clinical applications, especially for digital orthodontic workflows.

Propulsion controls

NASA Technical Reports Server (NTRS)

Harkney, R. D.

1980-01-01

Increased system requirements and functional integration with the aircraft have placed an increased demand on control system capability and reliability. To provide these at an affordable cost and weight and because of the rapid advances in electronic technology, hydromechanical systems are being phased out in favor of digital electronic systems. The transition is expected to be orderly from electronic trimming of hydromechanical controls to full authority digital electronic control. Future propulsion system controls will be highly reliable full authority digital electronic with selected component and circuit redundancy to provide the required safety and reliability. Redundancy may include a complete backup control of a different technology for single engine applications. The propulsion control will be required to communicate rapidly with the various flight and fire control avionics as part of an integrated control concept.

Ubiquitous Learning Environments in Higher Education: A Scoping Literature Review

ERIC Educational Resources Information Center

Virtanen, Mari Aulikki; Haavisto, Elina; Liikanen, Eeva; Kääriäinen, Maria

2018-01-01

Ubiquitous learning and the use of ubiquitous learning environments heralds a new era in higher education. Ubiquitous learning environments enhance context-aware and seamless learning experiences available from any location at any time. They support smooth interaction between authentic and digital learning resources and provide personalized…

CR digital mammography: an affordable entry.

PubMed

Fischer, Cathy

2006-01-01

CR full-field digital mammography (FFDM) has been used extensively in other countries, and it was one of the 4 digital mammography technologies employed in the Digital Mammographic Imaging Screening Trial. Affordability and easy integration with pre-existing mammography systems makes CR FFDM an attractive way to secure the advantages of filmless mammography imaging. CR mammography is true digital mammography--it is merely a different way of acquiring the image. The FDA has recently approved the first CR FFDM system for sale in the United States. At Gundersen Lutheran Health System (La Crosse, Wisconsin), CR FFDM is the most practical technology for realizing the potential everyday clinical benefits of filmless mammography imaging.

Applied Space Systems Engineering. Chapter 17; Manage Technical Data

NASA Technical Reports Server (NTRS)

Kent, Peter

2008-01-01

Effective space systems engineering (SSE) is conducted in a fully electronic manner. Competitive hardware, software, and system designs are created in a totally digital environment that enables rapid product design and manufacturing cycles, as well as a multitude of techniques such as modeling, simulation, and lean manufacturing that significantly reduce the lifecycle cost of systems. Because the SSE lifecycle depends on the digital environment, managing the enormous volumes of technical data needed to describe, build, deploy, and operate systems is a critical factor in the success of a project. This chapter presents the key aspects of Technical Data Management (TDM) within the SSE process. It is written from the perspective of the System Engineer tasked with establishing the TDM process and infrastructure for a major project. Additional perspectives are reflected from the point of view of the engineers on the project who work within the digital engineering environment established by the TDM toolset and infrastructure, and from the point of view of the contactors who interface via the TDM infrastructure. Table 17.1 lists the TDM process as it relates to SSE.

Exploring the Role of In-Person Components for Online Health Behavior Change Interventions: Can a Digital Person-to-Person Component Suffice?

PubMed Central

Kane, Deborah; Senn, Charlene Y; Woodruff, Sarah J

2018-01-01

The growth of the digital environment provides tremendous opportunities to revolutionize health behavior change efforts. This paper explores the use of Web-based, mobile, and social media health behavior change interventions and determines whether there is a need for a face-to-face or an in-person component. It is further argued that that although in-person components can be beneficial for online interventions, a digital person-to-person component can foster similar results while dealing with challenges faced by traditional intervention approaches. Using a digital person-to-person component is rooted in social and behavioral theories such as the theory of reasoned action, and the social cognitive theory, and further justified by the human support constructs of the model of supportive accountability. Overall, face-to-face and online behavior change interventions have their respective advantages and disadvantages and functions, yet both serve important roles. It appears that it is in fact human support that is the most important component in the effectiveness and adherence of both face-to-face and online behavior change interventions, and thoughtfully introducing a digital person-to-person component, to replace face-to-face interactions, can provide the needed human support while diminishing the barriers of in-person meetings. The digital person-to-person component must create accountability, generate opportunities for tailored feedback, and create social support to successfully create health behavior change. As the popularity of the online world grows, and the interest in using the digital environment for health behavior change interventions continues to be embraced, further research into not only the use of online interventions, but the use of a digital person-to-person component, must be explored. PMID:29643048

Digital image management project for dermatological health care environments: a new dedicated software and review of the literature.

PubMed

Rubegni, Pietro; Nami, Niccolò; Poggiali, Sara; Tataranno, Domenico; Fimiani, M

2009-05-01

Because the skin is the only organ completely accessible to visual examination, digital technology has therefore attracted the attention of dermatologists for documenting, monitoring, measuring and classifying morphological manifestations. To describe a digital image management system dedicated to dermatological health care environments and to compare it with other existing softwares for digital image storage. We designed a reliable hardware structure that could ensure future scaling, because storage needs tend to grow exponentially. For the software, we chose a client-web server application based on a relational database and with a 'minimalist' user interface. We developed a software with a ready-made, adaptable index of skin pathologies. It facilitates classification by pathology, patient and visit, with an advanced search option allowing access to all images according to personalized criteria. The software also offers the possibility of comparing two or more digital images (follow-up). The fact that the archives of years of digital photos acquired and saved on PCs can easily be entered in the program distinguishes it from the others in the market. This option is fundamental for accessing all the photos taken in years of practice in the program without entering them one by one. The program is available to any user connected to the local Intranet and the system may directly be available in the future from the Internet. All clinics and surgeries, especially those that rely on digital images, are obliged to keep up with technological advances. It is therefore hoped that our project will become a model for medical structures intending to rationalise digital and other data according to statutory requirements.

Current trends in geomorphological mapping

NASA Astrophysics Data System (ADS)

Seijmonsbergen, A. C.

2012-04-01

Geomorphological mapping is a world currently in motion, driven by technological advances and the availability of new high resolution data. As a consequence, classic (paper) geomorphological maps which were the standard for more than 50 years are rapidly being replaced by digital geomorphological information layers. This is witnessed by the following developments: 1. the conversion of classic paper maps into digital information layers, mainly performed in a digital mapping environment such as a Geographical Information System, 2. updating the location precision and the content of the converted maps, by adding more geomorphological details, taken from high resolution elevation data and/or high resolution image data, 3. (semi) automated extraction and classification of geomorphological features from digital elevation models, broadly separated into unsupervised and supervised classification techniques and 4. New digital visualization / cartographic techniques and reading interfaces. Newly digital geomorphological information layers can be based on manual digitization of polygons using DEMs and/or aerial photographs, or prepared through (semi) automated extraction and delineation of geomorphological features. DEMs are often used as basis to derive Land Surface Parameter information which is used as input for (un) supervised classification techniques. Especially when using high-res data, object-based classification is used as an alternative to traditional pixel-based classifications, to cluster grid cells into homogeneous objects, which can be classified as geomorphological features. Classic map content can also be used as training material for the supervised classification of geomorphological features. In the classification process, rule-based protocols, including expert-knowledge input, are used to map specific geomorphological features or entire landscapes. Current (semi) automated classification techniques are increasingly able to extract morphometric, hydrological, and in the near future also morphogenetic information. As a result, these new opportunities have changed the workflows for geomorphological mapmaking, and their focus have shifted from field-based techniques to using more computer-based techniques: for example, traditional pre-field air-photo based maps are now replaced by maps prepared in a digital mapping environment, and designated field visits using mobile GIS / digital mapping devices now focus on gathering location information and attribute inventories and are strongly time efficient. The resulting 'modern geomorphological maps' are digital collections of geomorphological information layers consisting of georeferenced vector, raster and tabular data which are stored in a digital environment such as a GIS geodatabase, and are easily visualized as e.g. 'birds' eye' views, as animated 3D displays, on virtual globes, or stored as GeoPDF maps in which georeferenced attribute information can be easily exchanged over the internet. Digital geomorphological information layers are increasingly accessed via web-based services distributed through remote servers. Information can be consulted - or even build using remote geoprocessing servers - by the end user. Therefore, it will not only be the geomorphologist anymore, but also the professional end user that dictates the applied use of digital geomorphological information layers.

Coaxial digital holography measures particular matter in cloud and ambient atmosphere

NASA Astrophysics Data System (ADS)

Li, Baosheng; Yu, Haonan; Jia, Yizhen; Tao, Xiaojie; Zhang, Yang

2018-02-01

In the artificially affected weather, the detection of cloud droplets particles provides an important reference for the effective impact of artificial weather. Digital holography has the unique advantages of full-field, non-contact, no damage, real-time and quantification. In this paper, coaxial digital holography is used to record the polyethylene standard particles and aluminum scrap, and some important parameters, such as three-dimensional coordinate spatial distribution and particle size, will be obtained by the means of analyzing the digital hologram of the particle. The experimental results verify the feasibility of the coaxial digital holographic device applied to the measurement of the cloud parameters, and complete the construction of the coaxial digital holographic system and the measurement of the particles.

Cyberspace Policy Review: Assuring a Trusted and Resilient Information and Communications Infrastructure

DTIC Science & Technology

2009-05-01

information technology revolution. The architecture of the Nation’s digital infrastructure, based largely upon the Internet, is not secure or resilient...thriving digital infrastructure. In addi­ tion, differing national and regional laws and practices —such as laws concerning the investigation and... technology has transformed the global economy and connected people and markets in ways never imagined. To realize the full benefits of the digital

Digital Semaphore: Technical Feasibility of QR Code Optical Signaling for Fleet Communications

DTIC Science & Technology

2013-06-01

Standards (http://www.iso.org) JIS Japanese Industrial Standard JPEG Joint Photographic Experts Group (digital image format; http://www.jpeg.org) LED...Denso Wave corporation in the 1990s for the Japanese automotive manufacturing industry. See Appendix A for full details. Reed-Solomon Error...eliminates camera blur induced by the shutter, providing clear images at extremely high frame rates. Thusly, digital cinema cameras are more suitable

Advanced microlens and color filter process technology for the high-efficiency CMOS and CCD image sensors

NASA Astrophysics Data System (ADS)

Fan, Yang-Tung; Peng, Chiou-Shian; Chu, Cheng-Yu

2000-12-01

New markets are emerging for digital electronic image device, especially in visual communications, PC camera, mobile/cell phone, security system, toys, vehicle image system and computer peripherals for document capture. To enable one-chip image system that image sensor is with a full digital interface, can make image capture devices in our daily lives. Adding a color filter to such image sensor in a pattern of mosaics pixel or wide stripes can make image more real and colorful. We can say 'color filter makes the life more colorful color filter is? Color filter means can filter image light source except the color with specific wavelength and transmittance that is same as color filter itself. Color filter process is coating and patterning green, red and blue (or cyan, magenta and yellow) mosaic resists onto matched pixel in image sensing array pixels. According to the signal caught from each pixel, we can figure out the environment image picture. Widely use of digital electronic camera and multimedia applications today makes the feature of color filter becoming bright. Although it has challenge but it is very worthy to develop the process of color filter. We provide the best service on shorter cycle time, excellent color quality, high and stable yield. The key issues of advanced color process have to be solved and implemented are planarization and micro-lens technology. Lost of key points of color filter process technology have to consider will also be described in this paper.

Digital exchange of graphic arts material: the ultimate challenge

NASA Astrophysics Data System (ADS)

McDowell, David Q.

1996-02-01

The digital exchange of graphic arts material - particularly advertising material for publications- in an open standardized environment represents the ultimate challenge for electronic data exchange. To meet the needs of publication advertising, the graphic arts industry must be able to transmit advertisements in an open environment where there are many senders and many receivers of the material. The material being transmitted consists of combinations of pictorial material, text, and line art with these elements superimposed on top of each other and/or interrelated in complex ways. The business relationships established by the traditional workflow environment, the combination of aesthetic and technical requirements, and the large base of existing hardware and software play a major role in limiting the options available. Existing first- and second-generation standards are focused on the CEPS environment, which operates on and stores data as raster files. The revolution in personal computer hardware and software, and the acceptance of these tools by the graphic arts community, dictates that standards must also be created and implemented for this world of vector/raster-based systems. The requirements for digital distribution of advertising material for publications, the existing graphic arts standards base, and the anticipation of future standards developments in response to these needs are explored.

Digital exchange of graphic arts material: the ultimate challenge

NASA Astrophysics Data System (ADS)

McDowell, David Q.

1996-01-01

The digital exchange of graphic arts material -- particularly advertising material for publications -- in an open standardized environment represents the ultimate challenge for electronic data exchange. To meet the needs of publication advertising, the graphic arts industry must be able to transmit advertisements in an open environment where there are many senders and many receivers of the material. The material being transmitted consists of combinations of pictorial material, text, and line art with these elements superimposed on top of each other and/or interrelated in complex ways. The business relationships established by the traditional workflow environment, the combination of aesthetic and technical requirements, and the large base of existing hardware and software play a major role in limiting the options available. Existing first- and second-generation standards are focused on the CEPS environment, which operates on and stores data as raster files. The revolution in personal computer hardware and software, and the acceptance of these tools by the graphic arts community, dictates that standards must also be created and implemented for this world of vector/raster-based systems. The requirements for digital distribution of advertising material for publications, the existing graphic arts standards base, and the anticipation of future standards developments in response to these needs are explored.

Experiments with digital organisms on the origin and maintenance of sex in changing environments.

PubMed

Misevic, Dusan; Ofria, Charles; Lenski, Richard E

2010-01-01

Many theories have been proposed to explain the evolution of sex, but the question remains unsettled owing to a paucity of compelling empirical tests. The crux of the problem is to understand the prevalence of sexual reproduction in the natural world, despite obvious costs relative to asexual reproduction. Here we perform experiments with digital organisms (evolving computer programs) to test the hypothesis that sexual reproduction is advantageous in changing environments. We varied the frequency and magnitude of environmental change, while the digital organisms could evolve their mode of reproduction as well as the traits affecting their fitness (reproductive rate) under the various conditions. Sex became the dominant mode of reproduction only when the environment changed rapidly and substantially (with particular functions changing from maladaptive to adaptive and vice versa). Even under these conditions, it was easier to maintain sexual reproduction than for sex to invade a formerly asexual population, although sometimes sex did invade and spread despite the obstacles to becoming established. Several diverse properties of the ancestral genomes, including epistasis and modularity, had no effect on the subsequent evolution of reproductive mode. Our study provides some limited support for the importance of changing environments to the evolution of sex, while also reinforcing the difficulty of evolving and maintaining sexual reproduction.

Ultrawide Shipboard Electrooptic Electromagnetic Environment Monitoring

DTIC Science & Technology

1994-05-01

ridge-waveguide modulator has a device length of 300 fpm, a waveguide thickness of 0.4 pm, a device capacitance of 0.2 pF, and a r x- 0.7. For digital ...important noise sources identified. Particular attention will be paid to the performance characteristics of the optical modulator. For digital ...1.32 tM for digital as well as analog optical link applications. The operation of the FKE modulator was discussed in Section 2.1.2 of this report. At

[Digitizing Human and Social Sciences Journals. Recent History and Perspectives].

PubMed

Parisot, Thomas

2015-06-01

Recent years have seen the emergence and the gradual rise of French journals digital offers in the fields of human and social sciences. In this article, we will both reconsider the conditions of occurrence of these services and discuss the evolution of their environment. Through the example of several emerging initiatives in the field of scientific publishing, in a context marked by continuity but also rupture, we will try to glimpse the role journals could play in the new digital world being created.

Strain measurement of objects subjected to aerodynamic heating using digital image correlation: experimental design and preliminary results.

PubMed

Pan, Bing; Jiang, Tianyun; Wu, Dafang

2014-11-01

In thermomechanical testing of hypersonic materials and structures, direct observation and quantitative strain measurement of the front surface of a test specimen directly exposed to severe aerodynamic heating has been considered as a very challenging task. In this work, a novel quartz infrared heating device with an observation window is designed to reproduce the transient thermal environment experienced by hypersonic vehicles. The specially designed experimental system allows the capture of test article's surface images at various temperatures using an optical system outfitted with a bandpass filter. The captured images are post-processed by digital image correlation to extract full-field thermal deformation. To verify the viability and accuracy of the established system, thermal strains of a chromiumnickel austenite stainless steel sample heated from room temperature up to 600 °C were determined. The preliminary results indicate that the air disturbance between the camera and the specimen due to heat haze induces apparent distortions in the recorded images and large errors in the measured strains, but the average values of the measured strains are accurate enough. Limitations and further improvements of the proposed technique are discussed.

Algorithms used in the Airborne Lidar Processing System (ALPS)

USGS Publications Warehouse

Nagle, David B.; Wright, C. Wayne

2016-05-23

The Airborne Lidar Processing System (ALPS) analyzes Experimental Advanced Airborne Research Lidar (EAARL) data—digitized laser-return waveforms, position, and attitude data—to derive point clouds of target surfaces. A full-waveform airborne lidar system, the EAARL seamlessly and simultaneously collects mixed environment data, including submerged, sub-aerial bare earth, and vegetation-covered topographies.ALPS uses three waveform target-detection algorithms to determine target positions within a given waveform: centroid analysis, leading edge detection, and bottom detection using water-column backscatter modeling. The centroid analysis algorithm detects opaque hard surfaces. The leading edge algorithm detects topography beneath vegetation and shallow, submerged topography. The bottom detection algorithm uses water-column backscatter modeling for deeper submerged topography in turbid water.The report describes slant range calculations and explains how ALPS uses laser range and orientation measurements to project measurement points into the Universal Transverse Mercator coordinate system. Parameters used for coordinate transformations in ALPS are described, as are Interactive Data Language-based methods for gridding EAARL point cloud data to derive digital elevation models. Noise reduction in point clouds through use of a random consensus filter is explained, and detailed pseudocode, mathematical equations, and Yorick source code accompany the report.

Digital and social media opportunities for dietary behaviour change.

PubMed

McGloin, Aileen F; Eslami, Sara

2015-05-01

The way that people communicate, consume media and seek and receive information is changing. Forty per cent of the world's population now has an internet connection, the average global social media penetration is 39% and 1·5 billion people have internet access via mobile phone. This large-scale move in population use of digital, social and mobile media presents an unprecedented opportunity to connect with individuals on issues concerning health. The present paper aims to investigate these opportunities in relation to dietary behaviour change. Several aspects of the digital environment could support behaviour change efforts, including reach, engagement, research, segmentation, accessibility and potential to build credibility, trust, collaboration and advocacy. There are opportunities to influence behaviour online using similar techniques to traditional health promotion programmes; to positively affect health-related knowledge, skills and self-efficacy. The abundance of data on citizens' digital behaviours, whether through search behaviour, global positioning system tracking, or via demographics and interests captured through social media profiles, offer exciting opportunities for effectively targeting relevant health messages. The digital environment presents great possibilities but also great challenges. Digital communication is uncontrolled, multi-way and co-created and concerns remain in relation to inequalities, privacy, misinformation and lack of evaluation. Although web-based, social-media-based and mobile-based studies tend to show positive results for dietary behaviour change, methodologies have yet to be developed that go beyond basic evaluation criteria and move towards true measures of behaviour change. Novel approaches are necessary both in the digital promotion of behaviour change and in its measurement.

Digital Games in Education: The Design of Games-Based Learning Environments

ERIC Educational Resources Information Center

Gros, Begona

2007-01-01

In recent years, electronic games have assumed an important place in the lives of children and adolescents. Children acquire digital literacy informally, through play, and neither schools nor other educational institutions take sufficient account of this important aspect. We consider that multimedia design for training and education should combine…

The Digital Marketplace and Library and Information Education in the GCC Member Nations: A Critical Review.

ERIC Educational Resources Information Center

Rehman, Sajjad ur; Al-Ansari, Husain

2003-01-01

Assessed six library and information education programs in preparing manpower for the digital environment in three countries in the Gulf Cooperation Council (GCC): Saudi Arabia, Kuwait, and Oman. Highlights include curriculum changes; student-teacher ratio; technological, physical and instructional resources; hardware; software; vendors;…

Digital Learning for All. Now

ERIC Educational Resources Information Center

Costa, Jonathan P., Sr.

2012-01-01

The evidence is undeniable and abundant: the future of learning and work is digital. Yet despite the possibilities, progress toward a truly 21st century learning environment is painfully lacking: the printed page still forms the foundation of learning for most students. How can public schools meet the challenges of the modern learner when they are…

Keeping a (Digital) Eye on Nature's Clock

ERIC Educational Resources Information Center

Magney, Troy; Eitel, Karla; Eitel, Jan; Jansen, Vincent; Schon, Jenny; Rittenburg, Rebecca; Vierling, Lee

2013-01-01

Many students probably take pictures daily. Whether snapshots of their friends at a Justin Bieber concert or of their latest skateboard trick, these images document changes in a student's life. Digital cameras can do more, however, than record memories to post on Facebook. They can also help students examine changes in their environment. This…

Determining the Accessibility of K-12 Digital Materials: Tools for Educators

ERIC Educational Resources Information Center

Smith, Sean J.; Stahl, William

2016-01-01

This article explores the manner in which teachers and district leaders can further determine whether or not the digital materials they are considering are accessible for all learners--particularly those with disabilities--and appropriate to the accommodations and modifications provided in the brick-and-mortar school environment. The article…

A Linguistic Approach to Identify the Affective Dimension Expressed in Textual Messages

ERIC Educational Resources Information Center

Rigo, Sandro José; da Rosa Alves, Isa Mara; Victória Barbosa, Jorge Luis

2015-01-01

The digital mediation resources used in Distance Education can hinder the teacher's perception about the student's state of mind. However, the textual expression in natural language is widely encouraged in most Distance Education courses, through the use of Virtual Learning Environments and other digital tools. This fact has motivated research…

Finding Family Facts in the Digital Age: Family History Research and Production Literacies

ERIC Educational Resources Information Center

Willever-Farr, Heather Lynn

2017-01-01

This study examines the online information behaviors of experienced and novice family history researchers, though the lens of accuracy and an increasingly digital research and production environment. It presents a model of the information behaviors of family history researchers, as well as a literacies framework, which visualizes the skills and…

The Role Distance Learning Has to Play in Offender Education

ERIC Educational Resources Information Center

Seelig, Caroline; Rate, Leanne

2014-01-01

This article looks into the uses of digital and online tools in distance learning to improve literacy and numeracy of offenders in New Zealand prisons. Looking at the benefits and restrictions of digital education within the prison environment, this article discusses the solutions that Open Polytechnic, in partnership with the the New Zealand…

Digitizing and Preserving Law School Recordings: A Duke Law Case Study

ERIC Educational Resources Information Center

White, Hollie; Bordo, Miguel; Chen, Sean

2015-01-01

Written as a case study, this article outlines Duke Law School Information Services' video digitization, preservation, and access initiative. This article begins with a discussion of the case study environment and the cross-departmental evaluation of in-house video production and processing workflows. The in-house preservation reformatting process…

Supporting Collocation Learning with a Digital Library

ERIC Educational Resources Information Center

Wu, Shaoqun; Franken, Margaret; Witten, Ian H.

2010-01-01

Extensive knowledge of collocations is a key factor that distinguishes learners from fluent native speakers. Such knowledge is difficult to acquire simply because there is so much of it. This paper describes a system that exploits the facilities offered by digital libraries to provide a rich collocation-learning environment. The design is based on…

Conceptions of Self and the Use of Digital Technologies in a Learning Environment

ERIC Educational Resources Information Center

Benson, D. E.; Mekolichick, Jeanne

2007-01-01

While research has identified various personality and demographic characteristics that appear to be associated with a variety of activities related to the use of digital technologies (e.g., Biner, Dean & Mellinger, 1994; Biner, Summers, Dean, Bink, Anderson & Gelder, 1996; Black, 1992; Clark, 1993; Figueroa, 1992), little is known about how…

Using Digital Learning Platforms to Extend the Flipped Classroom

ERIC Educational Resources Information Center

Balzotti, Jonathan M.; McCool, Lynn B.

2016-01-01

Although digital environments already play a vital role in the flipped classroom model, this research project shows that in university writing classrooms, innovative content design and delivery systems can extend the walls of the classroom to areas beyond, in which students transfer and connect course content with the professional world. In this…

Innovating from the Inside: Teacher Influence and the "Promisingness" of Digital Learning Environments

ERIC Educational Resources Information Center

Cloonan, Anne; Hutchison, Kirsten; Paatsch, Louise

2014-01-01

In line with global trends, Australian educational policy emphatically recognises the need for contemporary learners to be digitally literate, with provision of "one-to-one" devices to individual learners in schools a major implementation strategy. However, without teacher commitment, the benefits of such investment in one-to-one…

Effects of Feedback in an Online Algebra Intervention

ERIC Educational Resources Information Center

Bokhove, Christian; Drijvers, Paul

2012-01-01

The design and arrangement of appropriate automatic feedback in digital learning environment is a widely recognized issue. In this article, we investigate the effect of feedback on the design and the results of a digital intervention for algebra. Three feedback principles guided the intervention: timing and fading, crises, and feedback variation.…

Academic Achievement Enhanced by Personal Digital Assistant Use

ERIC Educational Resources Information Center

Bick, Alexander

2005-01-01

Research during the past decade suggests that integrating computing technology in general, and mobile computers in particular, into the educational environment has positive effects. This is the first long-term study of high school Personal Digital Assistant use. It involved three-parts, 146 students during four years. Part one found that PDA use…

Designing Interactions for Learning: Physicality, Interactivity, and Interface Effects in Digital Environments

ERIC Educational Resources Information Center

Hoffman, Daniel L.

2013-01-01

The purpose of the study is to better understand the role of physicality, interactivity, and interface effects in learning with digital content. Drawing on work in cognitive science, human-computer interaction, and multimedia learning, the study argues that interfaces that promote physical interaction can provide "conceptual leverage"…

Considering Literacy and Policy in the Context of Digital Environments

ERIC Educational Resources Information Center

Kinzer, Charles K.

2010-01-01

This article (1) argues that literacy is being redefined as a result of the use of digital media, and (2) provides suggestions for policy makers, budget decision-makers, teachers, researchers, and interested others about literacy and language arts standards, assessment, and teaching related to "new literacies," including: (a) Maximize the…

Digital Games in eLearning Environments: Current Uses and Emerging Trends

ERIC Educational Resources Information Center

Moreno-Ger, Pablo; Burgos, Daniel; Torrente, Javier

2009-01-01

The notion of using games in education is as old as games themselves. In addition, the massive market opened by the digital games industry has caused great interest regarding their specific potential in education. However, this interest is sometimes thwarted by the resistance of traditional educational settings toward technology-enhanced learning…

Just Another Format: Integrating Resources for Users of Personal Digital Assistants

ERIC Educational Resources Information Center

Koufogiannakis, Denise; Ryan, Pam; Dahl, Susan

2005-01-01

This article discusses the integration of library resources for users of personal digital assistants (PDAs), with a focus on collections issues within an academic environment. The University of Alberta Libraries' PDA services initiative is used as an example of integrating services and resources into a library collection. Licensing issues, loaning…

Contradictory Explorative Assessment. Multimodal Teacher/Student Interaction in Scandinavian Digital Learning Environments

ERIC Educational Resources Information Center

Kjällander, Susanne

2018-01-01

Assessment in the much-discussed digital divide in Scandinavian technologically advanced schools, is the study object of this article. Interaction is studied to understand assessment; and to see how assessment can be didactically designed to recognise students' learning. With a multimodal, design theoretical perspective on learning teachers' and…

The Pedagogy of the Observed: How Does Surveillance Technology Influence Dance Studio Education?

ERIC Educational Resources Information Center

Berg, Tanya

2015-01-01

A local trend in commercial dance studio education is the implementation of real-time digital video surveillance. This case study explores how digital video cameras in the dance studio environment affect asymmetrical power relationships already present in the commercial studio setting, as well as how surveillance impacts feminist pedagogical…

Collaborative Digital Literacy Practices among Adult Learners: Levels of Confidence and Perceptions of Importance

ERIC Educational Resources Information Center

Sharp, Laurie A.

2018-01-01

Technology has transformed learning at the postsecondary level and significantly increased the prevalence of digital learning environments. As adult educators approach instructional design, they must consider how to apply research-based practices that preserve the quality of instruction and provide adult learners with technology-based instruction…

Structural Relationships between Variables of Elementary School Students' Intention of Accepting Digital Textbooks

ERIC Educational Resources Information Center

Joo, Young Ju; Joung, Sunyoung; Choi, Se-Bin; Lim, Eugene; Go, Kyung Yi

2014-01-01

The purpose of this study is to explore variables affecting the acceptance of digital textbooks in the elementary school environment and provide basic information and resources to increase the intention of acceptance. Based on the above research purposes. Surveys were conducted using Google Docs targeting randomly selected elementary school…

Designing Science Learning with Game-Based Approaches

ERIC Educational Resources Information Center

Liu, Min; Rosenblum, Jason A.; Horton, Lucas; Kang, Jina

2014-01-01

Given the growing popularity of digital games as a form of entertainment, educators are interested in exploring using digital games as a tool to facilitate learning. In this study, we examine game-based learning by describing a learning environment that combines game elements, play, and authenticity in the real world for the purpose of engaging…

Understanding Textual Authorship in the Digital Environment: Lessons from Historical Perspectives

ERIC Educational Resources Information Center

Velagic, Zoran; Hasenay, Damir

2013-01-01

Introduction: The paper explains how the modern understanding of authorship developed and sets out the problems to be considered when discussing digital authorship. Method: The contextual analysis of contents of the key themes is employed; in the articulation of the conclusions, analytic and synthetic approaches are used. Results: At each turning…

Proposing a Theoretical Framework for Digital Age Youth Information Behavior Building upon Radical Change Theory

ERIC Educational Resources Information Center

Koh, Kyungwon

2011-01-01

Contemporary young people are engaged in a variety of information behaviors, such as information seeking, using, sharing, and creating. The ways youth interact with information have transformed in the shifting digital information environment; however, relatively little empirical research exists and no theoretical framework adequately explains…

Digital Topographic Mapping in Urban Obstructed Environment Based on Multi-GNSS Network RTK Technology

NASA Astrophysics Data System (ADS)

Guo, Qiuying; Zhao, Tonglong; Zhang, Chao; Wu, Xuxiang

2017-10-01

Digital topographic mapping experiments were carried out based on network RTK technology using GPS/BEIDOU/GLONASS multi-constellation compatible GNSS receivers in urban obstructed environment. Operation scheme and technique flow were discussed. Experimental results show that the horizontal position and elevation of the points measured by RTK can reach 2cm and 3cm precision level respectively in open environment. RTK initialization time needs about 3-5s. While in obstructed environment, such as high building and tree shanding, the RTK initialization time needs about dozens of seconds or tens of seconds, and sometimes floating solutions or even differential solutions were obtained. The impact of dense and tall building on RTK measurement is more seriously. It is more likely to get RTK fixed solution in the south side of high building than the north side of the building.

Virtual slide telepathology workstation of the future: lessons learned from teleradiology.

PubMed

Krupinski, Elizabeth A

2009-08-01

The clinical reading environment for the 21st century pathologist looks very different than it did even a few short years ago. Glass slides are quickly being replaced by digital "virtual slides," and the traditional light microscope is being replaced by the computer display. There are numerous questions that arise however when deciding exactly what this new digital display viewing environment will be like. Choosing a workstation for daily use in the interpretation of digital pathology images can be a very daunting task. Radiology went digital nearly 20 years ago and faced many of the same challenges so there are lessons to be learned from these experiences. One major lesson is that there is no "one size fits all" workstation so users must consider a variety of factors when choosing a workstation. In this article, we summarize some of the potentially critical elements in a pathology workstation and the characteristics one should be aware of and look for in the selection of one. Issues pertaining to both hardware and software aspects of medical workstations will be reviewed particularly as they may impact the interpretation process.

Digital fabrication of multi-material biomedical objects.

PubMed

Cheung, H H; Choi, S H

2009-12-01

This paper describes a multi-material virtual prototyping (MMVP) system for modelling and digital fabrication of discrete and functionally graded multi-material objects for biomedical applications. The MMVP system consists of a DMMVP module, an FGMVP module and a virtual reality (VR) simulation module. The DMMVP module is used to model discrete multi-material (DMM) objects, while the FGMVP module is for functionally graded multi-material (FGM) objects. The VR simulation module integrates these two modules to perform digital fabrication of multi-material objects, which can be subsequently visualized and analysed in a virtual environment to optimize MMLM processes for fabrication of product prototypes. Using the MMVP system, two biomedical objects, including a DMM human spine and an FGM intervertebral disc spacer are modelled and digitally fabricated for visualization and analysis in a VR environment. These studies show that the MMVP system is a practical tool for modelling, visualization, and subsequent fabrication of biomedical objects of discrete and functionally graded multi-materials for biomedical applications. The system may be adapted to control MMLM machines with appropriate hardware for physical fabrication of biomedical objects.

Development of the NASA Digital Astronaut Project Muscle Model

NASA Technical Reports Server (NTRS)

Lewandowski, Beth E.; Pennline, James A.; Thompson, W. K.; Humphreys, B. T.; Ryder, J. W.; Ploutz-Snyder, L. L.; Mulugeta, L.

2015-01-01

This abstract describes development work performed on the NASA Digital Astronaut Project Muscle Model. Muscle atrophy is a known physiological response to exposure to a low gravity environment. The DAP muscle model computationally predicts the change in muscle structure and function vs. time in a reduced gravity environment. The spaceflight muscle model can then be used in biomechanical models of exercise countermeasures and spaceflight tasks to: 1) develop site specific bone loading input to the DAP bone adaptation model over the course of a mission; 2) predict astronaut performance of spaceflight tasks; 3) inform effectiveness of new exercise countermeasures concepts.

Flight test validation of a design procedure for digital autopilots

NASA Technical Reports Server (NTRS)

Bryant, W. H.

1983-01-01

Commercially available general aviation autopilots are currently in transition from an analogue circuit system to a computer implemented digital flight control system. Well known advantages of the digital autopilot include enhanced modes, self-test capacity, fault detection, and greater computational capacity. A digital autopilot's computational capacity can be used to full advantage by increasing the sophistication of the digital autopilot's chief function, stability and control. NASA's Langley Research Center has been pursuing the development of direct digital design tools for aircraft stabilization systems for several years. This effort has most recently been directed towards the development and realization of multi-mode digital autopilots for GA aircraft, conducted under a SPIFR-related program called the General Aviation Terminal Operations Research (GATOR) Program. This presentation focuses on the implementation and testing of a candidate multi-mode autopilot designed using these newly developed tools.

[Comparison of the image quality of conventional and digital radiography in lizards. Mammography technique versus digital detector system].

PubMed

Bochmann, Monika; Ludewig, E; Pees, M

2011-01-01

A conventional high-resolution screen-film system (Film Kodak MIN-R S, Kodak MIN-R 2000) was compared with an indirect digital detector system (Varian PaxScan 4030E) for use in radiography of lizards. A total of 20 bearded dragons (Pogona vitticeps ) with body masses between 123 g and 487 g were investigated by using conventional and digital image acquisition techniques. The digital image was taken with the same dose as well as half the dose of the conventional radiograph. The study was conducted semi-blinded as the x-ray images were encoded and randomised. Five veterinarians with clinical experience in reptile medicine served as observers. Exactly defined structures in three anatomical regions were assessed using a three-step scale. Furthermore, the overall quality of the respective region was evaluated using a five-step scale. Evaluation of the data was done by visual grading analysis. None of the structures examined was assessed to be of significantly inferior quality on the digital images in comparison to the conventional radiographs. The majority of the results demonstrated an equal quality of both systems. For assessment of the lung tissue and the pulmonary vessels as well as the overall assessment of the lung, the digital radiographs with full dose were rated to be significantly superior in comparison to the film-screen system. Furthermore, the joint contours of the shoulder and cubital joints and the overall assessments of the humerus and the caudal coelomic cavity were rated significantly better on digital images with full dose compared to those with reduced dose. The digital flat panel detector technique examined in this study is equal or superior to the conventional high-resolution screen-film system used. Nevertheless, the practicability of a dose reduction is limited in bearded dragons. Digital imaging systems are progressively being used in veterinary practice. The results of the study demonstrate the useful application of the digital detector systems in lizards.

Full-field wrist pulse signal acquisition and analysis by 3D Digital Image Correlation

NASA Astrophysics Data System (ADS)

Xue, Yuan; Su, Yong; Zhang, Chi; Xu, Xiaohai; Gao, Zeren; Wu, Shangquan; Zhang, Qingchuan; Wu, Xiaoping

2017-11-01

Pulse diagnosis is an essential part in four basic diagnostic methods (inspection, listening, inquiring and palpation) in traditional Chinese medicine, which depends on longtime training and rich experience, so computerized pulse acquisition has been proposed and studied to ensure the objectivity. To imitate the process that doctors using three fingertips with different pressures to feel fluctuations in certain areas containing three acupoints, we established a five dimensional pulse signal acquisition system adopting a non-contacting optical metrology method, 3D digital image correlation, to record the full-field displacements of skin fluctuations under different pressures. The system realizes real-time full-field vibration mode observation with 10 FPS. The maximum sample frequency is 472 Hz for detailed post-processing. After acquisition, the signals are analyzed according to the amplitude, pressure, and pulse wave velocity. The proposed system provides a novel optical approach for digitalizing pulse diagnosis and massive pulse signal data acquisition for various types of patients.

Digital Earth Watch And Picture Post Network: Measuring The Environment Through Digital Images

NASA Astrophysics Data System (ADS)

Schloss, A. L.; Beaudry, J.; Pickle, J.; Carrera, F.

2012-12-01

Digital Earth Watch (DEW) involves individuals, schools, organizations and communities in a systematic monitoring project of their local environment, especially vegetation health. The program offers people the means to join the Picture Post network and to study and analyze their own findings using DEW software. A Picture Post is an easy-to-use and inexpensive platform for repeatedly taking digital photographs as a standardized set of images of the entire 360° landscape, which then can be shared over the Internet on the Picture Post website. This simple concept has the potential to create a wealth of information and data on changing environmental conditions, which is important for a society grappling with the effects of environmental change. Picture Posts may be added by anyone interested in monitoring a particular location. The value of a Picture Post is in the commitment of participants to take repeated photographs - monthly, weekly, or even daily - to build up a long-term record over many years. This poster will show examples of Picture Post pictures being used for monitoring and research applications, and a DEW mobile app for capturing repeat digital photographs at a virtual post. We invite individuals, schools, informal education centers, groups and communities to join.; A new post and its website. ; Creating a virtual post using the mobile app.

Hybrid photonic signal processing

NASA Astrophysics Data System (ADS)

Ghauri, Farzan Naseer

This thesis proposes research of novel hybrid photonic signal processing systems in the areas of optical communications, test and measurement, RF signal processing and extreme environment optical sensors. It will be shown that use of innovative hybrid techniques allows design of photonic signal processing systems with superior performance parameters and enhanced capabilities. These applications can be divided into domains of analog-digital hybrid signal processing applications and free-space---fiber-coupled hybrid optical sensors. The analog-digital hybrid signal processing applications include a high-performance analog-digital hybrid MEMS variable optical attenuator that can simultaneously provide high dynamic range as well as high resolution attenuation controls; an analog-digital hybrid MEMS beam profiler that allows high-power watt-level laser beam profiling and also provides both submicron-level high resolution and wide area profiling coverage; and all optical transversal RF filters that operate on the principle of broadband optical spectral control using MEMS and/or Acousto-Optic tunable Filters (AOTF) devices which can provide continuous, digital or hybrid signal time delay and weight selection. The hybrid optical sensors presented in the thesis are extreme environment pressure sensors and dual temperature-pressure sensors. The sensors employ hybrid free-space and fiber-coupled techniques for remotely monitoring a system under simultaneous extremely high temperatures and pressures.

Digital system upset. The effects of simulated lightning-induced transients on a general-purpose microprocessor

NASA Technical Reports Server (NTRS)

Belcastro, C. M.

1983-01-01

Flight critical computer based control systems designed for advanced aircraft must exhibit ultrareliable performance in lightning charged environments. Digital system upset can occur as a result of lightning induced electrical transients, and a methodology was developed to test specific digital systems for upset susceptibility. Initial upset data indicates that there are several distinct upset modes and that the occurrence of upset is related to the relative synchronization of the transient input with the processing sate of the digital system. A large upset test data base will aid in the formulation and verification of analytical upset reliability modeling techniques which are being developed.

Digitizing and Securing Archived Laboratory Notebooks

ERIC Educational Resources Information Center

Caporizzo, Marilyn

2008-01-01

The Information Group at Millipore has been successfully using a digital rights management tool to secure the email distribution of archived laboratory notebooks. Millipore is a life science leader providing cutting-edge technologies, tools, and services for bioscience research and biopharmaceutical manufacturing. Consisting of four full-time…

Operation and tests of a DDC101 A/D

NASA Astrophysics Data System (ADS)

Nguyen, H.

1994-11-01

For the KTeV PMT laser monitoring system, one needs a high resolution device with a large dynamic range to be used for digitizing PIN photodiodes. The dynamic range should be wider than or comparable to the KTeV digitizer (17-bits). The Burr-Brown DDC101 is a precision, wide dynamic range, charge digitizing A/D converter with 20-bit resolution, packaged in a 28-pin plastic, double-wide DP. Low level current output devices such as photosensors can be directly connected to its input. The digital output can be clocked-out serially from the pins. For typical operations, a relatively wide gate of 1 msec should be used. The full scale charge is 500 pC for unipolar mode. The bipolar mode scale is +/- 250 pC. The advertised integral nonlinearity is 0.003% of FSR. This document describes only the basic DDC101 operations since full detail can be found in the DDC101 manual. Tests results are given in section 3.

Experience with synchronous and asynchronous digital control systems

NASA Technical Reports Server (NTRS)

Regenie, V. A.; Chacon, C. V.; Lock, W. P.

1986-01-01

Flight control systems have undergone a revolution since the days of simple mechanical linkages; presently the most advanced systems are full-authority, full-time digital systems controlling unstable aircraft. With the use of advanced control systems, the aerodynamic design can incorporate features that allow greater performance and fuel savings, as can be seen on the new Airbus design and advanced tactical fighter concepts. These advanced aircraft will be and are relying on the flight control system to provide the stability and handling qualities required for safe flight and to allow the pilot to control the aircraft. Various design philosophies have been proposed and followed to investigate system architectures for these advanced flight control systems. One major area of discussion is whether a multichannel digital control system should be synchronous or asynchronous. This paper addressed the flight experience at the Dryden Flight Research Facility of NASA's Ames Research Center with both synchronous and asynchronous digital flight control systems. Four different flight control systems are evaluated against criteria such as software reliability, cost increases, and schedule delays.

Operational viewpoint of the X-29A digital flight control system

NASA Technical Reports Server (NTRS)

Chacon, Vince; Mcbride, David

1988-01-01

In the past few years many flight control systems have been implemented as full-authority, full-time digital systems. The digital design has allowed flight control systems to make use of many enhanced elements that are generally considered too complex to implement in an analog system. Examples of these elements are redundant information exchanged between channels to allow for continued operation after multiple failures and multiple variable gain schedules to optimize control of the aircraft throughout its flight envelope and in all flight modes. The introduction of the digital system for flight control also created the problem of obtaining information from the system in an understandable and useful format. This paper presents how the X-29A was dealt with during its operations at NASA Ames-Dryden Flight Research Facility. A brief description of the X-29A control system, a discussion of the tools developed to aid in daily operations, and the troubleshooting of the aircraft are included.

Vroom: designing an augmented environment for remote collaboration in digital cinema production

NASA Astrophysics Data System (ADS)

Margolis, Todd; Cornish, Tracy

2013-03-01

As media technologies become increasingly affordable, compact and inherently networked, new generations of telecollaborative platforms continue to arise which integrate these new affordances. Virtual reality has been primarily concerned with creating simulations of environments that can transport participants to real or imagined spaces that replace the "real world". Meanwhile Augmented Reality systems have evolved to interleave objects from Virtual Reality environments into the physical landscape. Perhaps now there is a new class of systems that reverse this precept to enhance dynamic media landscapes and immersive physical display environments to enable intuitive data exploration through collaboration. Vroom (Virtual Room) is a next-generation reconfigurable tiled display environment in development at the California Institute for Telecommunications and Information Technology (Calit2) at the University of California, San Diego. Vroom enables freely scalable digital collaboratories, connecting distributed, high-resolution visualization resources for collaborative work in the sciences, engineering and the arts. Vroom transforms a physical space into an immersive media environment with large format interactive display surfaces, video teleconferencing and spatialized audio built on a highspeed optical network backbone. Vroom enables group collaboration for local and remote participants to share knowledge and experiences. Possible applications include: remote learning, command and control, storyboarding, post-production editorial review, high resolution video playback, 3D visualization, screencasting and image, video and multimedia file sharing. To support these various scenarios, Vroom features support for multiple user interfaces (optical tracking, touch UI, gesture interface, etc.), support for directional and spatialized audio, giga-pixel image interactivity, 4K video streaming, 3D visualization and telematic production. This paper explains the design process that has been utilized to make Vroom an accessible and intuitive immersive environment for remote collaboration specifically for digital cinema production.

Evaluation of the Effect of Light and Scanning Time Delay on The Image Quality of Intra Oral Photostimulable Phosphor Plates

PubMed Central

Eskandarloo, Amir; Yousefi, Arman; Soheili, Setareh; Ghazikhanloo, Karim; Amini, Payam; Mohammadpoor, Haniyeh

2017-01-01

Background: Nowadays, digital radiography is widely used in dental practice. One of the most common types is Photo Stimulated Phosphor Plate (PSP). Objective: The aims of this experimental study were to evaluate the impacts of different combinations of storage conditions and varying delays in reading of digital images captured using PSPs. Methods: Standardized images of a step wedges were obtained using PSPs from the Digora digital systems. Plates were exposed and immediately scanned to produce the baseline gold standard. The plates were re-exposed and stored in four different storage conditions: white light, yellow light, natural light environment and dark room, then scanned after 10 and 30 minutes and 4 and 8 hours. Objective analysis was conducted by density measurements and the data were analyzed statistically using GEE test. Subjective analysis was performed by two oral and maxillofacial radiologists and the results were analyzed using McNemar’s test. Results: The results from GEE analysis show that in the natural light environment, the densities in 10 minutes did not differ from the baseline. The mean densities decreased significantly during the time in all environments. The mean densities in step 2 for the dark room environment decreased with a slighter slope in comparison to yellow environment significantly. Conclusion: PSP images showed significant decrease in the density in plates scanned for 10 minutes or longer after exposure which may not be detected clinically. The yellow light environment had a different impact on the quality of PSP images. The spatial resolution did not change significantly with time. PMID:29430262

Evaluation of the Effect of Light and Scanning Time Delay on The Image Quality of Intra Oral Photostimulable Phosphor Plates.

PubMed

Eskandarloo, Amir; Yousefi, Arman; Soheili, Setareh; Ghazikhanloo, Karim; Amini, Payam; Mohammadpoor, Haniyeh

2017-01-01

Nowadays, digital radiography is widely used in dental practice. One of the most common types is Photo Stimulated Phosphor Plate (PSP). The aims of this experimental study were to evaluate the impacts of different combinations of storage conditions and varying delays in reading of digital images captured using PSPs. Standardized images of a step wedges were obtained using PSPs from the Digora digital systems. Plates were exposed and immediately scanned to produce the baseline gold standard. The plates were re-exposed and stored in four different storage conditions: white light, yellow light, natural light environment and dark room, then scanned after 10 and 30 minutes and 4 and 8 hours. Objective analysis was conducted by density measurements and the data were analyzed statistically using GEE test. Subjective analysis was performed by two oral and maxillofacial radiologists and the results were analyzed using McNemar's test. The results from GEE analysis show that in the natural light environment, the densities in 10 minutes did not differ from the baseline. The mean densities decreased significantly during the time in all environments. The mean densities in step 2 for the dark room environment decreased with a slighter slope in comparison to yellow environment significantly. PSP images showed significant decrease in the density in plates scanned for 10 minutes or longer after exposure which may not be detected clinically. The yellow light environment had a different impact on the quality of PSP images. The spatial resolution did not change significantly with time.

The Use of Mobile Technologies in Multimedia-Supported Learning Environments

ERIC Educational Resources Information Center

Duygu Eristi, Suzan; Haseski, Halil Ibrahim; Uluuysal, Betul; Karakoyun, Ferit

2011-01-01

The aim of the study is to reveal the students' opinions about the use of PDAs (Personal Digital Assistant) in learning environment within the context of multimedia based applications. Through purposeful sampling, 17 undergraduate students attending the elective course of BTO 323 Character Design in Computer Environment in the Department of…

A Framework for Designing Collaborative Learning Environments Using Mobile AR

ERIC Educational Resources Information Center

Cochrane, Thomas; Narayan, Vickel; Antonczak, Laurent

2016-01-01

Smartphones provide a powerful platform for augmented reality (AR). Using a smartphone's camera together with the built in GPS, compass, gyroscope, and touch screen enables the real world environment to be overlaid with contextual digital information. The creation of mobile AR environments is relatively simple, with the development of mobile AR…

Soft Systems Methodology for Personalized Learning Environment

ERIC Educational Resources Information Center

Nair, Uday

2015-01-01

There are two sides to a coin when it comes to implementing technology at universities; on one side, there is the university using technologies via the virtual learning environment that seems to be outdated with the digital needs of the students, and on the other side, while implementing technology at the university learning environment the focus…

Accommodating the Instrumental Genesis Framework within Dynamic Technology Environments

ERIC Educational Resources Information Center

Hegedus, Stephen J.; Moreno-Armella, Luis

2010-01-01

In certain digital environments, "hot-spots" are key infrastructural pieces that allow the dynamic construction and re-construction of mathematical figures. We shall discuss their existence with respect to what we call user-environment co-actions, describing how they are sustainable bi-directional processes that have the potential to ground and…

Teacher-Student Perspectives of Invisible Pedagogy: New Directions in Online Problem-Based Learning Environments

ERIC Educational Resources Information Center

Barber, Wendy; King, Sherry

2016-01-01

Universities and institutions of higher education are facing economic pressures to sustain large classes, while simultaneously maintaining the quality of the online learning environment (Deming et al., 2015). Digital learning environments require significant pedagogical shifts on the part of the teacher. This paper is a qualitative examination of…

User questionnaire to evaluate the radiological workspace.

PubMed

van Ooijen, Peter M A; Koesoema, Allya P; Oudkerk, Matthijs

2006-01-01

Over the past few years, an increase in digitalization of radiology departments can be seen, which has a large impact on the work of the radiologists. This impact is not only demonstrated by the increased use of digital images but also by changing demands on the whole reading environment. In this study, we evaluated the satisfaction of our radiologists with our digital Picture Archival and Communication System environment and their workspace. This evaluation was performed by distribution of a questionnaire consisting of a score sheet and some open questions to all radiologists and residents. Out of 25 questionnaires, 12 were adequately answered and returned. Results clearly showed that most problems were present in the area of reading room design and layout and comfort and ergonomics. Based on the results from this study, adaptations were made and the results were also used in the planning of the redesign of the entire department of radiology.

Eyes on the prize: reflections on the impact of the evolving digital ecology on the librarian as expert intermediary and knowledge coach, 1969–2009*

PubMed Central

Homan, J. Michael

2010-01-01

Objective: The 2009 Janet Doe Lecture reflects on the continuing value and increasing return on investment of librarian-mediated services in the constantly evolving digital ecology and complex knowledge environment of the health sciences. Setting: The interrelationship of knowledge, decision making based on knowledge, technology used to access and retrieve knowledge, and the important linkage roles of expert librarian intermediaries is examined. Methodology: Professional experiences from 1969 to 2009, occurring during a time of unprecedented changes in the digital ecology of librarianship, are the base on which the evolving role and value of librarians as knowledge coaches and expert intermediaries are examined. Conclusion: Librarian-mediated services linking knowledge and critical decision making in health care have become more valuable than ever as technology continues to reshape an increasingly complex knowledge environment. PMID:20098655

A compact radiation source for digital subtractive angiography

NASA Astrophysics Data System (ADS)

Wiedemann, H.; Baltay, M.; Carr, R.; Hernandez, M.; Lavender, W.

1994-08-01

Beam requirements for 33 keV radiation used in digital subtraction angiography have been established through extended experimentation first at Stanford and later at the National Synchrotron Light Source in Brookhaven. So far research and development of this medical procedure to image coronary blood vessels have been undertaken on large high energy electron storage rings. With progress in this diagnostic procedure, it is interesting to look for an optimum concept for providing a 33 keV radiation source which would fit into the environment of a hospital. A variety of competing effects and technologies to produce 33 keV radiation are available, but none of these processes provides the combination of sufficient photon flux and monochromaticity except for synchrotron radiation from an electron storage ring. The conceptual design of a compact storage ring optimized to fit into a hospital environment and producing sufficient 33 keV radiation for digital subtraction radiography will be discussed.

DASCH to Measure (and preserve) the Harvard Plates: Opening the ˜100-year Time Domain Astronomy Window

NASA Astrophysics Data System (ADS)

Grindlay, J.; Tang, S.; Simcoe, R.; Laycock, S.; Los, E.; Mink, D.; Doane, A.; Champine, G.

2009-08-01

The temporal Universe is now possible to study on previously inaccessible timescales of days to decades, over a full century, with the planned full-digitization of the Harvard plate collection. The Digital Access to a Sky Century @ Harvard (DASCH) project has developed the world's highest-speed precision plate scanner and the required software to digitize the ˜500,000 glass photographic plates (mostly 20 x 25~cm) that record images of the full sky taken by some 20 telescopes in both hemispheres over the period 1880 - 1985. These provide ˜500-1000 measures of any object brighter than the plate limit (typically B ˜14 - 17) with photometric accuracy from the digital image typically Δm ˜0.10 - 0.15 mag, with the presently developed photometry pipeline and spatially-dependent calibration (using the Hubble Guide Star Catalog) for each plate. We provide an overview of DASCH, the processing, and example light curves that illustrate the power of this unique dataset and resource. Production scanning and serving on-line the entire ˜1 PB database (both images and derived light curves) on spinning disk could be completed within ˜3 - 5 y after funding (for scanner operations and database construction) is obtained.

A Cultural Evolution Approach to Digital Media

PubMed Central

Acerbi, Alberto

2016-01-01

Digital media have today an enormous diffusion, and their influence on the behavior of a vast part of the human population can hardly be underestimated. In this review I propose that cultural evolution theory, including both a sophisticated view of human behavior and a methodological attitude to modeling and quantitative analysis, provides a useful framework to study the effects and the developments of media in the digital age. I will first give a general presentation of the cultural evolution framework, and I will then introduce this more specific research program with two illustrative topics. The first topic concerns how cultural transmission biases, that is, simple heuristics such as “copy prestigious individuals” or “copy the majority,” operate in the novel context of digital media. The existence of transmission biases is generally justified with their adaptivity in small-scale societies. How do they operate in an environment where, for example, prestigious individuals possess not-relevant skills, or popularity is explicitly quantified and advertised? The second aspect relates to fidelity of cultural transmission. Digitally-mediated interactions support cheap and immediate high-fidelity transmission, in opposition, for example, to oral traditions. How does this change the content that is more likely to spread? Overall, I suggest the usefulness of a “long view” to our contemporary digital environment, contextualized in cognitive science and cultural evolution theory, and I discuss how this perspective could help us to understand what is genuinely new and what is not. PMID:28018200

Calibration of aero-structural reduced order models using full-field experimental measurements

NASA Astrophysics Data System (ADS)

Perez, R.; Bartram, G.; Beberniss, T.; Wiebe, R.; Spottswood, S. M.

2017-03-01

The structural response of hypersonic aircraft panels is a multi-disciplinary problem, where the nonlinear structural dynamics, aerodynamics, and heat transfer models are coupled. A clear understanding of the impact of high-speed flow effects on the structural response, and the potential influence of the structure on the local environment, is needed in order to prevent the design of overly-conservative structures, a common problem in past hypersonic programs. The current work investigates these challenges from a structures perspective. To this end, the first part of this investigation looks at the modeling of the response of a rectangular panel to an external heating source (thermo-structural coupling) where the temperature effect on the structure is obtained from forward looking infrared (FLIR) measurements and the displacement via 3D-digital image correlation (DIC). The second part of the study uses data from a previous series of wind-tunnel experiments, performed to investigate the response of a compliant panel to the effects of high-speed flow, to train a pressure surrogate model. In this case, the panel aero-loading is obtained from fast-response pressure sensitive paint (PSP) measurements, both directly and from the pressure surrogate model. The result of this investigation is the use of full-field experimental measurements to update the structural model and train a computational efficient model of the loading environment. The use of reduced order models, informed by these full-field physical measurements, is a significant step toward the development of accurate simulation models of complex structures that are computationally tractable.

Finger-Powered Electro-Digital-Microfluidics.

PubMed

Peng, Cheng; Ju, Y Sungtaek

2017-01-01

Portable microfluidic devices are promising for point-of-care (POC) diagnosis and bio- and environmental surveillance in resource-constrained or non-laboratory environments. Lateral-flow devices, some built off paper or strings, have been widely developed but the fixed layouts of their underlying wicking/microchannel structures limit their flexibility and present challenges in implementing multistep reactions. Digital microfluidics can circumvent these difficulties by addressing discrete droplets individually. Existing approaches to digital microfluidics, however, often require bulky power supplies/batteries and high voltage circuits. We present a scheme to drive digital microfluidic devices by converting mechanical energy of human fingers to electrical energy using an array of piezoelectric elements. We describe the integration our scheme into two promising digital microfluidics platforms: one based on the electro-wetting-on-dielectric (EWOD) phenomenon and the other on the electrophoretic control of droplet (EPD). Basic operations of droplet manipulations, such as droplet transport, merging and splitting, are demonstrated using the finger-powered digital-microfluidics.

Digital Inclusion & Health Communication: A Rapid Review of Literature.

PubMed

Borg, Kim; Boulet, Mark; Smith, Liam; Bragge, Peter

2018-06-11

Information and communication technologies can be a valuable tool for enhancing health communication. However, not everyone is utilising the wide suite of digital opportunities. This disparity has the potential to exacerbate existing social and health inequalities, particularly among vulnerable groups such as those who are in poor health and the elderly. This review aimed to systematically identify the common barriers to, and facilitators of, digital inclusion. A comprehensive database search yielded 969 citations. Following screening, seven systematic reviews and three non-systematic reviews were identified. Collectively, the reviews found that physical access continues to be a barrier to digital inclusion. However, provision of access alone is insufficient, as digital ability and attitude were also potential barriers. Social support, direct user experience and collaborative learning/design were identified as key strategies to improve inclusion. These review findings provide guidance for health communication practitioners in designing and implementing effective programmes in the digital environment.

The Western North Carolina Technology Consortium: A Collaborative Approach to Bridging the Digital Divide

ERIC Educational Resources Information Center

Sink, David W.; Jackson, Karen Luke; Boham, Kenneth A.; Shockley, David

2004-01-01

Community college presidents face an uphill struggle in preparing their institutions for the rapidly changing technological learning environment. Visionary presidents in rural community colleges are presented with yet another challenge: that of finding themselves on the wrong side of the digital divide. This article describes how presidents of 12…

Copyright and Creative Commons License: Can Educators Gain Benefits in the Digital Age?

ERIC Educational Resources Information Center

Lamlert, Wariya

2014-01-01

In this society of digital environment, to keep pace with the technological change that causes the difficulties of information access together with royalty fees remunerated for making use of copyrighted materials, Creative Commons (CC) license is introduced. However, debates on the issues of copyright and CC license have widely arisen. This…

Material Development Based on Digital Storytelling Activities and Assessment of Students' Views

ERIC Educational Resources Information Center

Tunç, Özlem Ayvaz

2017-01-01

In education system, as well as creating innovative classroom environments, it is necessary to choose effective teaching models and to structure and integrate these to the education program. Within this framework, the purpose of this study is to present students? views on developing materials based on digital narration for the teaching process in…

Digital Storytelling: A Powerful Technology Tool for the 21st Century Classroom

ERIC Educational Resources Information Center

Robin, Bernard R.

2008-01-01

Digital storytelling has emerged over the last few years as a powerful teaching and learning tool that engages both teachers and their students. However, until recently, little attention has been paid to a theoretical framework that could be employed to increase the effectiveness of technology as a tool in a classroom environment. A discussion of…

Development of Children's Creativity and Manual Skills within Digital Game-Based Learning Environment

ERIC Educational Resources Information Center

Hsiao, H-S.; Chang, C-S.; Lin, C-Y.; Hu, P-M.

2014-01-01

In this study, we developed a digital game-based learning (DGBL) system, called the ToES, to foster students' creativity. Fifty-one fifth-grade students from two classes in a public school in Taipei, Taiwan, were recruited and consented to participate. Both classes consisted of students with mixed abilities studying a foundation unit entitled…

Holding the World in Your Hand: Creating a Mobile Language Learning Environment

ERIC Educational Resources Information Center

Gilgen, Read

2005-01-01

Three years ago, the language lab at the University of Wisconsin-Madison encountered the same challenge many campuses face. Older analog technologies were getting harder--in some cases impossible--to maintain, thus making the move to digital technologies a necessity. A typical solution would have been to digitize existing materials and substitute…

A Constructionist Learning Environment for Teachers to Model Learning Designs

ERIC Educational Resources Information Center

Laurillard, D.; Charlton, P.; Craft, B.; Dimakopoulos, D.; Ljubojevic, D.; Magoulas, G.; Masterman, E.; Pujadas, R.; Whitley, E.A.; Whittlestone, K.

2013-01-01

The use of digital technologies is now widespread and increasing, but is not always optimized for effective learning. Teachers in higher education have little time or support to work on innovation and improvement of their teaching, which often means they simply replicate their current practice in a digital medium. This paper makes the case for a…

Culture Shift: Teaching in a Learner-Centered Environment Powered by Digital Learning. Digital Learning Series

ERIC Educational Resources Information Center

Wolf, Mary Ann

2012-01-01

Preparing all students to succeed in today's increasingly global economy and complex world requires a shift from a teacher-centric culture to learner-centered instruction, according to a new report from the Alliance for Excellent Education. This report examines the characteristics of learner-centered instruction and the support that educators and…

Can a "Shouting" Digital Game Help Learners Develop Oral Fluency in a Second Language?

ERIC Educational Resources Information Center

Grimshaw, Jennica; Cardoso, Walcir; Waddington, David

2016-01-01

This study examines the development of oral fluency in a Computer-Mediated Communication (CMC) environment that uses a "shouting" digital game as a pedagogical tool: Spaceteam ESL4. Spaceteam ESL is a game for mobile devices that involves time-sensitive aural exchanges among players (English learners), with great potential to promote…

People's Collection Wales: Online Access to the Heritage of Wales from Museums, Archives and Libraries

ERIC Educational Resources Information Center

Tedd, Lucy A.

2011-01-01

Purpose: The People's Collection Wales aims to collect, interpret, distribute and discuss Wales' cultural heritage in an online environment. Individual users or local history societies are able to create their own digital collections, contribute relevant content, as well as access digital resources from heritage institutions. This paper aims to…

Promoting Formative Assessment in a Connected Classroom Environment: Design and Implementation of Digital Resources

ERIC Educational Resources Information Center

Cusi, Annalisa; Morselli, Francesca; Sabena, Cristina

2017-01-01

This paper is based on a design-based research project investigating how to use digital resources to help activate formative assessment processes in the classroom. Performed as part of FaSMEd, a European Union project, our own project adopts a comprehensive theoretical framework, including the different functionalities of technology, formative…

Formal Learning Sequences and Progression in the Studio: A Framework for Digital Design Education

ERIC Educational Resources Information Center

Wärnestål, Pontus

2016-01-01

This paper examines how to leverage the design studio learning environment throughout long-term Digital Design education in order to support students to progress from tactical, well-defined, device-centric routine design, to confidently design sustainable solutions for strategic, complex, problems for a wide range of devices and platforms in the…

Human and Machine Entanglement in the Digital Archive: Academic Libraries and Socio-Technical Change

ERIC Educational Resources Information Center

Manoff, Marlene

2015-01-01

This essay urges a broadening of the discourse of library and information science (LIS) to address the convergence of forces shaping the information environment. It proposes adopting a model from the field of science studies that acknowledges the interdependence and coevolution of social, cultural, and material phenomena. Digital archives and…

The Effects of Blogging on Reading Engagement in the Upper Elementary Grades

ERIC Educational Resources Information Center

Ray, Holly Wilson

2013-01-01

With children growing up as digital natives, they have become accustomed to a fast paced, multitasking environment. In this digital landscape, children's brains learn in a parallel format, with instant information, as opposed to the traditional linear format with one skill being introduced at a time. Today's education methods used to…

A Room with a View: Observations on "Unanticipated" Licensing Agreements and Born Digital Content

ERIC Educational Resources Information Center

Lapinski, P. Scott

2012-01-01

One of the many challenges that content creators and repository administrators are both struggling with in this "born digital" information environment is the "ownership" of content. After several years of engaging directly with researchers across their campus and providing seminars on the National Institutes of Health (NIH) Public Access Policy,…

Personal Voices in Higher Education: A Digital Storytelling Experience for Pre-Service Teachers

ERIC Educational Resources Information Center

Kocaman-Karoglu, Aslihan

2016-01-01

Digital storytelling (DST) has recently emerged as a new tool in instructional environments. DST involves the combination of media and technology with traditional storytelling to help students learn. This paper examines the use of DST in a university course and pre-service teachers' perceptions of their learning experiences using this tool.…

Improving the English Proficiency of Native Japanese via Digital Storytelling, Blogs, and E-Mobile Technologies

ERIC Educational Resources Information Center

Obari, Hiroyuki; Lambacher, Stephen

2012-01-01

This paper reports on the use of digital storytelling and blog activities to make CALL classes more dynamic and personalized for both instructors and learners alike. An empirical research study was carried out to determine if a blended-learning environment incorporating m-learning could help improve the English listening, presentation, and…

Data Manipulation in an XML-Based Digital Image Library

ERIC Educational Resources Information Center

Chang, Naicheng

2005-01-01

Purpose: To help to clarify the role of XML tools and standards in supporting transition and migration towards a fully XML-based environment for managing access to information. Design/methodology/approach: The Ching Digital Image Library, built on a three-tier architecture, is used as a source of examples to illustrate a number of methods of data…

The New Generation of Citation Indexing in the Age of Digital Libraries

ERIC Educational Resources Information Center

Liu, Mengxiong; Cabrera, Peggy

2008-01-01

As the Web is becoming a powerful new medium in scientific publication and scholarly communication, citation indexing has found a new application in the digital environment. The authors reviewed the new developments in Web-based citation indexing and conducted a case study in three major citation search tools, "Web of Science", "Scopus" and…

Practice in Digital Research Spaces to Engage Students with eScience

ERIC Educational Resources Information Center

LeBard, Rebecca J.; Hibbert, D. Brynn; Quinnell, Rosanne

2017-01-01

New and emerging digital technologies are making an impact on how we practice science, and this has implications on how we teach science. We introduce the concept of the Electronic Laboratory Notebook (ELN) as used in the research environment and describe how we have implemented this as a tool for providing undergraduate science students with an…

Speaking the Language of Today's Digital Natives

ERIC Educational Resources Information Center

Neibling, John

2010-01-01

While most college presidents have mastered many basic tools of the digital environment, such as e-mail, Internet browsing, text messaging, most of them have yet to figure out social media--a glaring omission that remains one of the clearest dividing lines between generations young and old. Though most of them have yet to fully embrace social…

Examining Authentic Intellectual Work with a Historical Digital Documentary Inquiry Project in a Mandated State Testing Environment

ERIC Educational Resources Information Center

Swan, Kathy; Hofer, Mark; Swan, Gerry

2011-01-01

Three criteria for meaningful student learning--construction of knowledge, disciplined inquiry, and value beyond school--are assessed as authentic learning outcomes for an implementation of a digital documentary project in two fifth grade history classrooms where teachers' practices are constrained by a high-stakes testing climate. In all three…

College Students' Perspectives of E-Learning System Use in High Education

ERIC Educational Resources Information Center

Yanga, Ju-Yin; Yenb, Yen-Chen

2016-01-01

The purpose of this study was primarily to create, on a digital learning platform, a digital learning environment with freedom from such constraints for a group of seven college students. The researchers selected seven students from the Applied English program that were taking part in an internship combination program at San Diego State…

An Evidence Centered Design for Learning and Assessment in the Digital World. CRESST Report 778

ERIC Educational Resources Information Center

Behrens, John T.; Mislevy, Robert J.; DiCerbo, Kristen E.; Levy, Roy

2010-01-01

The world in which learning and assessment must take place is rapidly changing. The digital revolution has created a vast space of interconnected information, communication, and interaction. Functioning effectively in this environment requires so-called 21st century skills such as technological fluency, complex problem solving, and the ability to…

Factors Influencing Teachers' Integration of ICT in Teaching and Learning

ERIC Educational Resources Information Center

Lawrence, Japhet E.

2018-01-01

There is a growing demand on educational institutions to use ICT to teach the skills and knowledge students need for the digital age. The integration of ICT into education provides opportunities for teachers and students to work better in a globalized digital age, particularly in teaching and learning environment, where teaching and learning can…

Local Music Collections: Strategies for Digital Access, Presentation, and Preservation--A Case Study

ERIC Educational Resources Information Center

Doi, Carolyn

2015-01-01

The Saskatchewan Music Collection (SMC) is a local music collection held at the University of Saskatchewan. This case study examines a project to digitize and present this unique special collection in the online environment. The project aims to facilitate access to the collection, preserve the collection and promote scholarship and interest in the…

Digital database architecture and delineation methodology for deriving drainage basins, and a comparison of digitally and non-digitally derived numeric drainage areas

USGS Publications Warehouse

Dupree, Jean A.; Crowfoot, Richard M.

2012-01-01

The drainage basin is a fundamental hydrologic entity used for studies of surface-water resources and during planning of water-related projects. Numeric drainage areas published by the U.S. Geological Survey water science centers in Annual Water Data Reports and on the National Water Information Systems (NWIS) Web site are still primarily derived from hard-copy sources and by manual delineation of polygonal basin areas on paper topographic map sheets. To expedite numeric drainage area determinations, the Colorado Water Science Center developed a digital database structure and a delineation methodology based on the hydrologic unit boundaries in the National Watershed Boundary Dataset. This report describes the digital database architecture and delineation methodology and also presents the results of a comparison of the numeric drainage areas derived using this digital methodology with those derived using traditional, non-digital methods. (Please see report for full Abstract)

The modern library: lost and found.

PubMed Central

Lindberg, D A

1996-01-01

The modern library, a term that was heard frequently in the mid-twentieth century, has fallen into disuse. The over-promotion of computers and all that their enthusiasts promised probably hastened its demise. Today, networking is transforming how libraries provide--and users seek--information. Although the Internet is the natural environment for the health sciences librarian, it is going through growing pains as we face issues of censorship and standards. Today's "modern librarian" must not only be adept at using the Internet but must become familiar with digital information in all its forms--images, full text, and factual data banks. Most important, to stay "modern," today's librarians must embark on a program of lifelong learning that will enable them to make optimum use of the advantages offered by modern technology. PMID:8938334

Implementing DSpace at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Lowe, Greta

2007-01-01

This presentation looks at the implementation of the DSpace institutional repository system at the NASA Langley Technical Library. NASA Langley Technical Library implemented DSpace software as a replacement for the Langley Technical Report Server (LTRS). DSpace was also used to develop the Langley Technical Library Digital Repository (LTLDR). LTLDR contains archival copies of core technical reports in the aeronautics area dating back to the NACA era and other specialized collections relevant to the NASA Langley community. Extensive metadata crosswalks were created to facilitate moving data from various systems and formats to DSpace. The Dublin Core metadata screens were also customized. The OpenURL standard and Ex Libris Metalib are being used in this environment to assist our customers with either discovering full-text content or with initiating a request for the item.

Development of a synchrotron biaxial tensile device for in situ characterization of thin films mechanical response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geandier, G.; Synchrotron SOLEIL, L'Orme des Merisiers, BP 48, 91192 Gif sur Yvette; LPMTM, UPR 9001 CNRS, Universite Paris-Nord, 93430 Villetaneuse

2010-10-15

We have developed on the DIFFABS-SOLEIL beamline a biaxial tensile machine working in the synchrotron environment for in situ diffraction characterization of thin polycrystalline films mechanical response. The machine has been designed to test compliant substrates coated by the studied films under controlled, applied strain field. Technological challenges comprise the sample design including fixation of the substrate ends, the related generation of a uniform strain field in the studied (central) volume, and the operations from the beamline pilot. Preliminary tests on 150 nm thick W films deposited onto polyimide cruciform substrates are presented. The obtained results for applied strains usingmore » x-ray diffraction and digital image correlation methods clearly show the full potentialities of this new setup.« less

Side-specific effect of yolk testosterone elevation on second-to-fourth digit ratio in a wild passerine

NASA Astrophysics Data System (ADS)

Nagy, Gergely; Blázi, György; Hegyi, Gergely; Török, János

2016-02-01

Second-to-fourth digit ratio is a widely investigated sexually dimorphic morphological trait in human studies and could reliably indicate the prenatal steroid environment. Conducting manipulative experiments to test this hypothesis comes up against ethical limits in humans. However, oviparous tetrapods may be excellent models to experimentally investigate the effects of prenatal steroids on offspring second-to-fourth digit ratio. In this field study, we injected collared flycatcher ( Ficedula albicollis) eggs with physiological doses of testosterone. Fledglings from eggs with elevated yolk testosterone, regardless of their sex, had longer second digits on their left feet than controls, while the fourth digit did not differ between groups. Therefore, second-to-fourth digit ratio was higher in the testosterone-injected group, but only on the left foot. This is the first study which shows experimentally that early testosterone exposure can affect second-to-fourth digit ratio in a wild population of a passerine bird.

Digital pathology in nephrology clinical trials, research, and pathology practice.

PubMed

Barisoni, Laura; Hodgin, Jeffrey B

2017-11-01

In this review, we will discuss (i) how the recent advancements in digital technology and computational engineering are currently applied to nephropathology in the setting of clinical research, trials, and practice; (ii) the benefits of the new digital environment; (iii) how recognizing its challenges provides opportunities for transformation; and (iv) nephropathology in the upcoming era of kidney precision and predictive medicine. Recent studies highlighted how new standardized protocols facilitate the harmonization of digital pathology database infrastructure and morphologic, morphometric, and computer-aided quantitative analyses. Digital pathology enables robust protocols for clinical trials and research, with the potential to identify previously underused or unrecognized clinically useful parameters. The integration of digital pathology with molecular signatures is leading the way to establishing clinically relevant morpho-omic taxonomies of renal diseases. The introduction of digital pathology in clinical research and trials, and the progressive implementation of the modern software ecosystem, opens opportunities for the development of new predictive diagnostic paradigms and computer-aided algorithms, transforming the practice of renal disease into a modern computational science.

Attention and working memory in elderly: the influence of a distracting environment.

PubMed

Rodrigues, Pedro F S; Pandeirada, Josefa N S

2015-02-01

The present work investigated the effect of a distracting environment in the performance of attentional and working memory (WM) tasks in elderly participants. To this end, forty elderly performed two attentional tasks (simple reaction time and go/no-go tasks), and three WM tasks (arithmetic, memory for digits and sequences of letters and numbers). Each participant performed the tasks in a distracting and a non-distracting environment, with an interval of 14-21 days between sessions. The results revealed better performance in the attentional tasks when these were done in the non-distracting environment, as compared to when they were done in the distracting environment. Specifically, participants provided more accurate responses, fewer false alarms and omissions when responding in the non-distracting environment than when responding in the distracting environment. Participants were also faster at providing correct responses in the go/no-go task when it was performed in the non-distracting environment. As for the memory tasks, the effect of type of environment was significant only in the memory for digits in a forward direction task. Our data suggest the need to consider the potential damaging consequences of distracting environments when the elderly have to perform tasks that demand their attention. Specific examples of such situations are presented in the discussion (e.g., distracting effect of environment on medical and on psychological evaluations).

Safeguarding Copyrighted Contents: Digital Libraries and Intellectual Property Management. CWRU's Rights Management System.

ERIC Educational Resources Information Center

Alrashid, Tareq M.; Barker, James A.; Christian, Brian S.; Cox, Steven C.; Rabne, Michael W.; Slotta, Elizabeth A.; Upthegrove, Luella R.

1998-01-01

Describes Case Western Reserve University's (CWRU's) digital library project that examines the networked delivery of full-text materials and high-quality images to provide students excellent supplemental instructional resources delivered directly to their dormitory rooms. Reviews intellectual property (IP) management requirements and describes…

Montessori Practices: Options for a Digital Age

ERIC Educational Resources Information Center

Powell, Mark

2016-01-01

Mark Powell's plea for an open-minded view on the full scope of technology that is compatible with Montessori education enriches Maria Montessori's clear modernism of welcoming science into her educational vision. Growing up digital can be intelligently managed so that "technology may offer an effective, adaptable, and easily available means…

Impacts of Integrating the Repertory Grid into an Augmented Reality-Based Learning Design on Students' Learning Achievements, Cognitive Load and Degree of Satisfaction

ERIC Educational Resources Information Center

Wu, Po-Han; Hwang, Gwo-Jen; Yang, Mei-Ling; Chen, Chih-Hung

2018-01-01

Augmented reality (AR) offers potential advantages for intensifying environmental context awareness and augmenting students' experiences in real-world environments by dynamically overlapping digital materials with a real-world environment. However, some challenges to AR learning environments have been described, such as participants' cognitive…

A Decision-Tree-Oriented Guidance Mechanism for Conducting Nature Science Observation Activities in a Context-Aware Ubiquitous Learning

ERIC Educational Resources Information Center

Hwang, Gwo-Jen; Chu, Hui-Chun; Shih, Ju-Ling; Huang, Shu-Hsien; Tsai, Chin-Chung

2010-01-01

A context-aware ubiquitous learning environment is an authentic learning environment with personalized digital supports. While showing the potential of applying such a learning environment, researchers have also indicated the challenges of providing adaptive and dynamic support to individual students. In this paper, a decision-tree-oriented…

Benford analysis of quantum critical phenomena: First digit provides high finite-size scaling exponent while first two and further are not much better

NASA Astrophysics Data System (ADS)

Bera, Anindita; Mishra, Utkarsh; Singha Roy, Sudipto; Biswas, Anindya; Sen(De), Aditi; Sen, Ujjwal

2018-06-01

Benford's law is an empirical edict stating that the lower digits appear more often than higher ones as the first few significant digits in statistics of natural phenomena and mathematical tables. A marked proportion of such analyses is restricted to the first significant digit. We employ violation of Benford's law, up to the first four significant digits, for investigating magnetization and correlation data of paradigmatic quantum many-body systems to detect cooperative phenomena, focusing on the finite-size scaling exponents thereof. We find that for the transverse field quantum XY model, behavior of the very first significant digit of an observable, at an arbitrary point of the parameter space, is enough to capture the quantum phase transition in the model with a relatively high scaling exponent. A higher number of significant digits do not provide an appreciable further advantage, in particular, in terms of an increase in scaling exponents. Since the first significant digit of a physical quantity is relatively simple to obtain in experiments, the results have potential implications for laboratory observations in noisy environments.

Augmented reality: a review.

PubMed

Berryman, Donna R

2012-01-01

Augmented reality is a technology that overlays digital information on objects or places in the real world for the purpose of enhancing the user experience. It is not virtual reality, that is, the technology that creates a totally digital or computer created environment. Augmented reality, with its ability to combine reality and digital information, is being studied and implemented in medicine, marketing, museums, fashion, and numerous other areas. This article presents an overview of augmented reality, discussing what it is, how it works, its current implementations, and its potential impact on libraries.

Digitization and Visualization of Greenhouse Tomato Plants in Indoor Environments

PubMed Central

Li, Dawei; Xu, Lihong; Tan, Chengxiang; Goodman, Erik D.; Fu, Daichang; Xin, Longjiao

2015-01-01

This paper is concerned with the digitization and visualization of potted greenhouse tomato plants in indoor environments. For the digitization, an inexpensive and efficient commercial stereo sensor—a Microsoft Kinect—is used to separate visual information about tomato plants from background. Based on the Kinect, a 4-step approach that can automatically detect and segment stems of tomato plants is proposed, including acquisition and preprocessing of image data, detection of stem segments, removing false detections and automatic segmentation of stem segments. Correctly segmented texture samples including stems and leaves are then stored in a texture database for further usage. Two types of tomato plants—the cherry tomato variety and the ordinary variety are studied in this paper. The stem detection accuracy (under a simulated greenhouse environment) for the cherry tomato variety is 98.4% at a true positive rate of 78.0%, whereas the detection accuracy for the ordinary variety is 94.5% at a true positive of 72.5%. In visualization, we combine L-system theory and digitized tomato organ texture data to build realistic 3D virtual tomato plant models that are capable of exhibiting various structures and poses in real time. In particular, we also simulate the growth process on virtual tomato plants by exerting controls on two L-systems via parameters concerning the age and the form of lateral branches. This research may provide useful visual cues for improving intelligent greenhouse control systems and meanwhile may facilitate research on artificial organisms. PMID:25675284

Digitization and visualization of greenhouse tomato plants in indoor environments.

PubMed

Li, Dawei; Xu, Lihong; Tan, Chengxiang; Goodman, Erik D; Fu, Daichang; Xin, Longjiao

2015-02-10

This paper is concerned with the digitization and visualization of potted greenhouse tomato plants in indoor environments. For the digitization, an inexpensive and efficient commercial stereo sensor-a Microsoft Kinect-is used to separate visual information about tomato plants from background. Based on the Kinect, a 4-step approach that can automatically detect and segment stems of tomato plants is proposed, including acquisition and preprocessing of image data, detection of stem segments, removing false detections and automatic segmentation of stem segments. Correctly segmented texture samples including stems and leaves are then stored in a texture database for further usage. Two types of tomato plants-the cherry tomato variety and the ordinary variety are studied in this paper. The stem detection accuracy (under a simulated greenhouse environment) for the cherry tomato variety is 98.4% at a true positive rate of 78.0%, whereas the detection accuracy for the ordinary variety is 94.5% at a true positive of 72.5%. In visualization, we combine L-system theory and digitized tomato organ texture data to build realistic 3D virtual tomato plant models that are capable of exhibiting various structures and poses in real time. In particular, we also simulate the growth process on virtual tomato plants by exerting controls on two L-systems via parameters concerning the age and the form of lateral branches. This research may provide useful visual cues for improving intelligent greenhouse control systems and meanwhile may facilitate research on artificial organisms.

Application of a digital technique in evaluating the reliability of shade guides.

PubMed

Cal, E; Sonugelen, M; Guneri, P; Kesercioglu, A; Kose, T

2004-05-01

There appears to be a need for a reliable method for quantification of tooth colour and analysis of shade. Therefore, the primary objective of this study was to show the applicability of graphic software in colour analysis and secondly to investigate the reliability of commercial shade guides produced by the same manufacturer, using this digital technique. After confirming the reliability and reproducibility of the digital method by using self-assessed coloured images, three shade guides of the same manufacturer were photographed in daylight and in studio environments with a digital camera and saved in tagged image file format (TIFF) format. Colour analysis of each photograph was performed using the Adobe Photoshop 4.0 graphic program. Luminosity, and red, green, blue (L and RGB) values of each shade tab of each shade guide were measured and the data were subjected to statistical analysis using the repeated measure Anova test. The L and RGB values of the images taken in daylight differed significantly from those of the images taken in studio environment (P < 0.05). In both environments, the luminosity and red values of the shade tabs were significantly different from each other (P < 0.05). It was concluded that, when the environmental conditions were kept constant, the Adobe Photoshop 4.0 colour analysis program could be used to analyse the colour of images. On the other hand, the results revealed that the accuracy of shade tabs widely being used in colour matching should be readdressed.

Digital optical conversion module

DOEpatents

Kotter, D.K.; Rankin, R.A.

1988-07-19

A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer. 2 figs.

Digital optical conversion module

DOEpatents

Kotter, Dale K.; Rankin, Richard A.

1991-02-26

A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer.

DART, a platform for the creation and registration of cone beam digital tomosynthesis datasets.

PubMed

Sarkar, Vikren; Shi, Chengyu; Papanikolaou, Niko

2011-04-01

Digital tomosynthesis is an imaging modality that allows for tomographic reconstructions using only a fraction of the images needed for CT reconstruction. Since it offers the advantages of tomographic images with a smaller imaging dose delivered to the patient, the technique offers much promise for use in patient positioning prior to radiation delivery. This paper describes a software environment developed to help in the creation of digital tomosynthesis image sets from digital portal images using three different reconstruction algorithms. The software then allows for use of the tomograms for patient positioning or for dose recalculation if shifts are not applied, possibly as part of an adaptive radiotherapy regimen.

Chemotaxis of cancer cells in three-dimensional environment monitored label-free by quantitative phase digital holographic microscopy

NASA Astrophysics Data System (ADS)

Kemper, Björn; Schnekenburger, Jürgen; Ketelhut, Steffi

2017-02-01

We investigated the capabilities of digital holographic microscopy (DHM) for label-free quantification of the response of living single cells to chemical stimuli in 3D assays. Fibro sarcoma cells were observed in a collagen matrix inside 3D chemotaxis chambers with a Mach-Zehnder interferometer-based DHM setup. From the obtained series of quantitative phase images, the migration trajectories of single cells were retrieved by automated cell tracking and subsequently analyzed for maximum migration distance and motility. Our results demonstrate DHM as a highly reliable and efficient tool for label-free quantification of chemotaxis in 2D and 3D environments.

Augmented and virtual reality in surgery—the digital surgical environment: applications, limitations and legal pitfalls

PubMed Central

Baker, Benjamin; Amin, Kavit; Chan, Adrian; Patel, Ketan; Wong, Jason

2016-01-01

The continuing enhancement of the surgical environment in the digital age has led to a number of innovations being highlighted as potential disruptive technologies in the surgical workplace. Augmented reality (AR) and virtual reality (VR) are rapidly becoming increasingly available, accessible and importantly affordable, hence their application into healthcare to enhance the medical use of data is certain. Whether it relates to anatomy, intraoperative surgery, or post-operative rehabilitation, applications are already being investigated for their role in the surgeons armamentarium. Here we provide an introduction to the technology and the potential areas of development in the surgical arena. PMID:28090510

My Ideal City (mic): Virtual Environments to Design the Future Town

NASA Astrophysics Data System (ADS)

Borgherini, M.; Garbin, E.

2011-09-01

MIC is an EU funded project to explore the use of shared virtual environments as part of a public discussion on the issues of building the city of the future. An interactive exploration of four european cities - in the digital city models were translated urban places, family problems and citizens wishes - is a chance to see them in different ways and from different points of view, to imagine new scenarios to overcome barriers and stereotypes no longer effective. This paper describes the process from data to visualization of virtual cities and, in detail, the project of two interactive digital model (Trento and Lisbon).

Augmented and virtual reality in surgery-the digital surgical environment: applications, limitations and legal pitfalls.

PubMed

Khor, Wee Sim; Baker, Benjamin; Amin, Kavit; Chan, Adrian; Patel, Ketan; Wong, Jason

2016-12-01

The continuing enhancement of the surgical environment in the digital age has led to a number of innovations being highlighted as potential disruptive technologies in the surgical workplace. Augmented reality (AR) and virtual reality (VR) are rapidly becoming increasingly available, accessible and importantly affordable, hence their application into healthcare to enhance the medical use of data is certain. Whether it relates to anatomy, intraoperative surgery, or post-operative rehabilitation, applications are already being investigated for their role in the surgeons armamentarium. Here we provide an introduction to the technology and the potential areas of development in the surgical arena.

The Personal Motion Platform

NASA Technical Reports Server (NTRS)

Park, Brian Vandellyn

1993-01-01

The Neutral Body Posture experienced in microgravity creates a biomechanical equilibrium by enabling the internal forces within the body to find their own balance. A patented reclining chair based on this posture provides a minimal stress environment for interfacing with computer systems for extended periods. When the chair is mounted on a 3 or 6 axis motion platform, a generic motion simulator for simulated digital environments is created. The Personal Motion Platform provides motional feedback to the occupant in synchronization with their movements inside the digital world which enhances the simulation experience. Existing HMD based simulation systems can be integrated to the turnkey system. Future developments are discussed.

Open Source Live Distributions for Computer Forensics

NASA Astrophysics Data System (ADS)

Giustini, Giancarlo; Andreolini, Mauro; Colajanni, Michele

Current distributions of open source forensic software provide digital investigators with a large set of heterogeneous tools. Their use is not always focused on the target and requires high technical expertise. We present a new GNU/Linux live distribution, named CAINE (Computer Aided INvestigative Environment) that contains a collection of tools wrapped up into a user friendly environment. The CAINE forensic framework introduces novel important features, aimed at filling the interoperability gap across different forensic tools. Moreover, it provides a homogeneous graphical interface that drives digital investigators during the acquisition and analysis of electronic evidence, and it offers a semi-automatic mechanism for the creation of the final report.

Using Swarming Agents for Scalable Security in Large Network Environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crouse, Michael; White, Jacob L.; Fulp, Errin W.

2011-09-23

The difficulty of securing computer infrastructures increases as they grow in size and complexity. Network-based security solutions such as IDS and firewalls cannot scale because of exponentially increasing computational costs inherent in detecting the rapidly growing number of threat signatures. Hostbased solutions like virus scanners and IDS suffer similar issues, and these are compounded when enterprises try to monitor these in a centralized manner. Swarm-based autonomous agent systems like digital ants and artificial immune systems can provide a scalable security solution for large network environments. The digital ants approach offers a biologically inspired design where each ant in the virtualmore » colony can detect atoms of evidence that may help identify a possible threat. By assembling the atomic evidences from different ant types the colony may detect the threat. This decentralized approach can require, on average, fewer computational resources than traditional centralized solutions; however there are limits to its scalability. This paper describes how dividing a large infrastructure into smaller managed enclaves allows the digital ant framework to effectively operate in larger environments. Experimental results will show that using smaller enclaves allows for more consistent distribution of agents and results in faster response times.« less

Precision and Accuracy of a Digital Impression Scanner in Full-Arch Implant Rehabilitation.

PubMed

Pesce, Paolo; Pera, Francesco; Setti, Paolo; Menini, Maria

To evaluate the accuracy and precision of a digital scanner used to scan four implants positioned according to an immediate loading implant protocol and to assess the accuracy of an aluminum framework fabricated from a digital impression. Five master casts reproducing different edentulous maxillae with four tilted implants were used. Four scan bodies were screwed onto the low-profile abutments, and a digital intraoral scanner was used to perform five digital impressions of each master cast. To assess trueness, a metal framework of the best digital impression was produced with computer-aided design/computer-assisted manufacture (CAD/CAM) technology and passive fit was assessed with the Sheffield test. Gaps between the frameworks and the implant analogs were measured with a stereomicroscope. To assess precision, three-dimensional (3D) point cloud processing software was used to measure the deviations between the five digital impressions of each cast by producing a color map. The deviation values were grouped in three classes, and differences were assessed between class 2 (representing lower discrepancies) and the assembled classes 1 and 3 (representing the higher negative and positive discrepancies, respectively). The frameworks showed a mean gap of < 30 μm (range: 2 to 47 μm). A statistically significant difference was found between the two groups by the 3D point cloud software, with higher frequencies of points in class 2 than in grouped classes 1 and 3 (P < .001). Within the limits of this in vitro study, it appears that a digital impression may represent a reliable method for fabricating full-arch implant frameworks with good passive fit when tilted implants are present.

Comparison of radiation dose, workflow, patient comfort and financial break-even of standard digital radiography and a novel biplanar low-dose X-ray system for upright full-length lower limb and whole spine radiography.

PubMed

Dietrich, Tobias J; Pfirrmann, Christian W A; Schwab, Alexander; Pankalla, Katja; Buck, Florian M

2013-07-01

To compare the radiation dose, workflow, patient comfort, and financial break-even of a standard digital radiography and a biplanar low-dose X-ray system. A standard digital radiography system (Ysio, Siemens Healthcare, Erlangen, Germany) was compared with a biplanar X-ray unit (EOS, EOS imaging, Paris, France) consisting of two X-ray tubes and slot-scanning detectors, arranged at an angle of 90° allowing simultaneous vertical biplanar linear scanning in the upright patient position. We compared data of standing full-length lower limb radiographs and whole spine radiographs of both X-ray systems. Dose-area product was significantly lower for radiographs of the biplanar X-ray system than for the standard digital radiography system (e.g. whole spine radiographs; standard digital radiography system: 392.2 ± 231.7 cGy*cm(2) versus biplanar X-ray system: 158.4 ± 103.8 cGy*cm(2)). The mean examination time was significantly shorter for biplanar radiographs compared with standard digital radiographs (e.g. whole spine radiographs: 449 s vs 248 s). Patients' comfort regarding noise was significantly higher for the standard digital radiography system. The financial break-even point was 2,602 radiographs/year for the standard digital radiography system compared with 4,077 radiographs/year for the biplanar X-ray unit. The biplanar X-ray unit reduces radiation exposure and increases subjective noise exposure to patients. The biplanar X-ray unit demands a higher number of examinations per year for the financial break-even point, despite the lower labour cost per examination due to the shorter examination time.

Demonstration of digital fronthaul over self-seeded WDM-PON in commercial LTE environment.

PubMed

Ma, Yiran; Xu, Zhiguang; Zhang, Chengliang; Lin, Huafeng; Wang, Qing; Zhou, Min; Wang, Heng; Yu, Jingwen; Wang, Xiaomu

2015-05-04

CPRI between BBU and RRU equipment is carried by self-seeded WDM-PON prototype system within commercial LTE end-to-end environment. Delay and jitter meets CPRI requirements while services demonstrated show the same performance as bare fiber.

Position paper: recommendations for a digital mammography quality assurance program V4.0.

PubMed

Heggie, J C P; Barnes, P; Cartwright, L; Diffey, J; Tse, J; Herley, J; McLean, I D; Thomson, F J; Grewal, R K; Collins, L T

2017-09-01

In 2001 the ACPSEM published a position paper on quality assurance in screen film mammography which was subsequently adopted as a basis for the quality assurance programs of both the Royal Australian and New Zealand College of Radiologists (RANZCR) and of BreastScreen Australia. Since then the clinical implementation of digital mammography has been realised and it has become evident that existing screen-film protocols were not appropriate to assure the required image quality needed for reliable diagnosis or to address the new dose implications resulting from digital technology. In addition, the advantages and responsibilities inherent in teleradiology are most critical in mammography and also need to be addressed. The current document is the result of a review of current overseas practice and local experience in these areas. At this time the technology of digital imaging is undergoing significant development and there is still a lack of full international consensus about some of the detailed quality control (QC) tests that should be included in quality assurance (QA) programs. This document describes the current status in digital mammography QA and recommends test procedures that may be suitable in the Australasian environment. For completeness, this document also includes a review of the QA programs required for the various types of digital biopsy units used in mammography. In the future, international harmonisation of digital quality assurance in mammography and changes in the technology may require a review of this document. Version 2.0 represented the first of these updates and key changes related to image quality evaluation, ghost image evaluation and interpretation of signal to noise ratio measurements. In Version 3.0 some significant changes, made in light of further experience gained in testing digital mammography equipment were introduced. In Version 4.0, further changes have been made, most notably digital breast tomosynthesis (DBT) testing and QC have been addressed. Some additional testing for conventional projection imaging has been added in order that sites may have the capability to undertake dose surveys to confirm compliance with diagnostic reference levels (DRLs) that may be established at the National or State level. A key recommendation is that dosimetry calculations are now to be undertaken using the methodology of Dance et al. Some minor changes to existing facility QC tests have been made to ensure the suggested procedures align with those most recently adopted by the Royal Australian and New Zealand College of Radiologists and BreastScreen Australia. Future updates of this document may be provided as deemed necessary in electronic format on the ACPSEM's website ( https://www.acpsem.org.au/whatacpsemdoes/standards-position-papers and see also http://www.ranzcr.edu.au/quality-a-safety/radiology/practice-quality-activities/mqap ).

Digital processing of radiographic images from PACS to publishing.

PubMed

Christian, M E; Davidson, H C; Wiggins, R H; Berges, G; Cannon, G; Jackson, G; Chapman, B; Harnsberger, H R

2001-03-01

Several studies have addressed the implications of filmless radiologic imaging on telemedicine, diagnostic ability, and electronic teaching files. However, many publishers still require authors to submit hard-copy images for publication of articles and textbooks. This study compares the quality digital images directly exported from picture archive and communications systems (PACS) to images digitized from radiographic film. The authors evaluated the quality of publication-grade glossy photographs produced from digital radiographic images using 3 different methods: (1) film images digitized using a desktop scanner and then printed, (2) digital images obtained directly from PACS then printed, and (3) digital images obtained from PACS and processed to improve sharpness prior to printing. Twenty images were printed using each of the 3 different methods and rated for quality by 7 radiologists. The results were analyzed for statistically significant differences among the image sets. Subjective evaluations of the filmless images found them to be of equal or better quality than the digitized images. Direct electronic transfer of PACS images reduces the number of steps involved in creating publication-quality images as well as providing the means to produce high-quality radiographic images in a digital environment.

Digital pathology: DICOM-conform draft, testbed, and first results.

PubMed

Zwönitzer, Ralf; Kalinski, Thomas; Hofmann, Harald; Roessner, Albert; Bernarding, Johannes

2007-09-01

Hospital information systems are state of the art nowadays. Therefore, Digital Pathology, also labelled as Virtual Microscopy, has gained increased attention. Triggered by radiology, standardized information models and workflows were world-wide defined based on DICOM. However, DICOM-conform integration of Digital Pathology into existing clinical information systems imposes new problems requiring specific solutions concerning the huge amount of data as well as the special structure of the data to be managed, transferred, and stored. We implemented a testbed to realize and evaluate the workflow of digitized slides from acquisition to archiving. The experiences led to the draft of a DICOM-conform information model that accounted for extensions, definitions, and technical requirements necessary to integrate digital pathology in a hospital-wide DICOM environment. Slides were digitized, compressed, and could be viewed remotely. Real-time transfer of the huge amount of data was optimized using streaming techniques. Compared to a recent discussion in the DICOM Working Group for Digital Pathology (WG26) our experiences led to a preference of a JPEG2000/JPIP-based streaming of the whole slide image. The results showed that digital pathology is feasible but strong efforts by users and vendors are still necessary to integrate Digital Pathology into existing information systems.

Disparities in digital reporting of illness: A demographic and socioeconomic assessment.

PubMed

Henly, Samuel; Tuli, Gaurav; Kluberg, Sheryl A; Hawkins, Jared B; Nguyen, Quynh C; Anema, Aranka; Maharana, Adyasha; Brownstein, John S; Nsoesie, Elaine O

2017-08-01

Although digital reports of disease are currently used by public health officials for disease surveillance and decision making, little is known about environmental factors and compositional characteristics that may influence reporting patterns. The objective of this study is to quantify the association between climate, demographic and socio-economic factors on digital reporting of disease at the US county level. We reference approximately 1.5 million foodservice business reviews between 2004 and 2014, and use census data, machine learning methods and regression models to assess whether digital reporting of disease is associated with climate, socio-economic and demographic factors. The results show that reviews of foodservice businesses and digital reports of foodborne illness follow a clear seasonal pattern with higher reporting observed in the summer, when most foodborne outbreaks are reported and to a lesser extent in the winter months. Additionally, factors typically associated with affluence (such as, higher median income and fraction of the population with a bachelor's degrees) were positively correlated with foodborne illness reports. However, restaurants per capita and education were the most significant predictors of illness reporting at the US county level. These results suggest that well-known health disparities might also be reflected in the online environment. Although this is an observational study, it is an important step in understanding disparities in the online public health environment. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

A UVM simulation environment for the study, optimization and verification of HL-LHC digital pixel readout chips

NASA Astrophysics Data System (ADS)

Marconi, S.; Conti, E.; Christiansen, J.; Placidi, P.

2018-05-01

The operating conditions of the High Luminosity upgrade of the Large Hadron Collider are very demanding for the design of next generation hybrid pixel readout chips in terms of particle rate, radiation level and data bandwidth. To this purpose, the RD53 Collaboration has developed for the ATLAS and CMS experiments a dedicated simulation and verification environment using industry-consolidated tools and methodologies, such as SystemVerilog and the Universal Verification Methodology (UVM). This paper presents how the so-called VEPIX53 environment has first guided the design of digital architectures, optimized for processing and buffering very high particle rates, and secondly how it has been reused for the functional verification of the first large scale demonstrator chip designed by the collaboration, which has recently been submitted.

Technical experiences of implementing a wireless tracking and facial biometric verification system for a clinical environment

NASA Astrophysics Data System (ADS)

Liu, Brent; Lee, Jasper; Documet, Jorge; Guo, Bing; King, Nelson; Huang, H. K.

2006-03-01

By implementing a tracking and verification system, clinical facilities can effectively monitor workflow and heighten information security in today's growing demand towards digital imaging informatics. This paper presents the technical design and implementation experiences encountered during the development of a Location Tracking and Verification System (LTVS) for a clinical environment. LTVS integrates facial biometrics with wireless tracking so that administrators can manage and monitor patient and staff through a web-based application. Implementation challenges fall into three main areas: 1) Development and Integration, 2) Calibration and Optimization of Wi-Fi Tracking System, and 3) Clinical Implementation. An initial prototype LTVS has been implemented within USC's Healthcare Consultation Center II Outpatient Facility, which currently has a fully digital imaging department environment with integrated HIS/RIS/PACS/VR (Voice Recognition).

Applications of Course Management Systems in School Administration: Music Teacher Assessment through the Use of Digital Portfolios

ERIC Educational Resources Information Center

Mergen, Izzet

2013-01-01

This researcher had two purposes. The investigator's purpose in this action research was to develop a working prototype of a music teacher digital portfolio within the Moodle environment, which included artifacts, as they relate to New York State's Annual Performance Review (APPR) legislation. The regulation on teacher evaluation is New York State…

Examination the Digital Competence of Teacher Candidates in Terms of Different Variables

ERIC Educational Resources Information Center

Korucu, Agâh Tugrul; Yücel, Ahmet; Gündogdu, Mustafa M.; Gençtürk, Tarik

2015-01-01

It has been essential to make use of technology in education as a result of the improvements in information and communication technology in the 21st century. Teachers, who are the organizers and the developers of learning environments, need to have a high level of consciousness with regard to digital competence. Thus, students can acquire digital…

Building a Hypertextual Digital Library in the Humanities: A Case Study on London.

ERIC Educational Resources Information Center

Crane, Gregory; Smith, David A.; Wulfman, Clifford E.

This paper describes the creation of a new humanities digital library collection: 11,000,000 words and 10,000 images representing books, images, and maps on pre-twentieth century London and its environs. The London collection contained far more dense and precise information than the materials from the Greco-Roman world. The London collection thus…

Designing Digital Game-Based Learning Environments

ERIC Educational Resources Information Center

An, Yun-Jo; Bonk, Curtis J.

2009-01-01

With the emergence of the Web 2.0 and other technologies for learning, there are a variety of special places that did not exist previously in which to pursue learning. Not just a few dozen more but millions more. Many of these are not the physical learning spaces one might envision but entirely virtual or digital ones. As an example, the area of…

Extending the Flipped Classroom Model: Developing Second Language Writing Skills through Student-Created Digital Videos

ERIC Educational Resources Information Center

Engin, Marion

2014-01-01

This paper describes a project that aimed to leverage the students' interest and experience of technology and multimodal environments to develop their academic writing skills and second language learning. Students were expected to follow a model, research a topic, and craft a digital video tutorial on an aspect of academic writing which would form…

Effects of Digital Story on Academic Achievement, Learning Motivation and Retention among University Students

ERIC Educational Resources Information Center

Aktas, Elif; Yurt, Serap Uzuner

2017-01-01

The aim of this study was to determine the effect of the learning environment where digital stories are used as a learning material on the motivation, academic success, retention, and students' opinions. The study was carried out with mixed method which is a combination of quantitative and qualitative research approach. The study was implemented…

Virtual Worlds and the Learner Hero: How Today's Video Games Can Inform Tomorrow's Digital Learning Environments

ERIC Educational Resources Information Center

Rigby, C. Scott; Przybylski, Andrew K.

2009-01-01

Participation in expansive video games called "virtual worlds" has become a mainstream leisure activity for tens of millions of people around the world. The growth of this industry and the strong motivational appeal of these digital worlds invite a closer examination as to how educators can learn from today's virtual worlds in the development of…

What Is Happening in the Use of ICT Mathematics to Support Young Adolescent Learners? A New Zealand Experience

ERIC Educational Resources Information Center

Nicholas, Karen; Fletcher, Jo

2017-01-01

Advances in learning approaches can enhance deeper levels of mathematical thinking and engagement through the use of new digital environments and technologies. The growing utilisation of portable digital devices in schools has meant there are enhanced tools to support mathematical learning and understandings. This article focused on those who work…

Development and Evaluation of a Case-Based Digital Learning Tool about Children's Mathematical Thinking for Elementary School Teachers (L-TEST)

ERIC Educational Resources Information Center

Olkun, Sinan; Altun, Arif; Deryakulu, Deniz

2009-01-01

It is important for teachers of mathematics to know how pupils react to certain mathematical situations and what these reactions imply, in order to design more effective instructional environments based on their learning needs. This study reports the development processes of a digital learning tool (Learning Tool for Elementary School Teachers…

Cell Phones for Low-Resource Environments

ERIC Educational Resources Information Center

Chiverton, Scott

2017-01-01

Those of us in North America, Europe, many parts of Central and South America, and eastern Asia live in a digital world, and there has been ongoing debate about technology and learning. In other parts of the world, such as the African continent and much of central and south central Asia, there is evidence of a digital invasion, but it is still not…

Teaching Islam in Contemporary America: Digital Ethnography and the Affective Challenges of Islamic Studies Pedagogy

ERIC Educational Resources Information Center

Dorroll, Courtney; Dorroll, Phil

2017-01-01

In this article we address the affective dimensions and challenges of teaching about Islam and Islamic studies in the current American political and cultural environment and make two related arguments. First, we explain how the impact of certain kinds of digital media in the past few years has heightened the association of Islam with violence in…

A Multi-Modal Digital Game-Based Learning Environment for Hospitalized Children with Chronic Illnesses.

ERIC Educational Resources Information Center

Chin, Jui-Chih; Tsuei, Mengping

2014-01-01

The aim of this study was to explore the digital game-based learning for children with chronic illnesses in the hospital settings. The design-based research and qualitative methods were applied. Three eight-year-old children with leukemia participated in this study. In the first phase, the multi-user game-based learning system was developed and…

Can You Hear Us Now? Investigating the Effects of a Wireless Grid Social Radio Station on Collaboration and Communication in Fragile Populations

ERIC Educational Resources Information Center

Chauncey, Sarah A.

2012-01-01

The ability to interact with peers and coworkers in online digital networks is essential in learning and business environments. Our digital participatory culture is based on communication in response to purposeful activity and is facilitated by information and communication technologies (ICT). Students with emotional, behavioral, and learning…

Proposal of a Framework for Internet Based Licensing of Learning Objects

ERIC Educational Resources Information Center

Santos, Osvaldo A.; Ramos, Fernando M. S.

2004-01-01

This paper presents a proposal of a framework whose main objective is to manage the delivery and rendering of learning objects in a digital rights controlled environment. The framework is based on a digital licensing scheme that requires each learning object to have the proper license in order to be rendered by a trusted player. A conceptual model…

The Effect of the Digital Classroom on Academic Success and Online Technologies Self-Efficacy

ERIC Educational Resources Information Center

Ozerbas, Mehmet Arif; Erdogan, Bilge Has

2016-01-01

This study aimed to observe whether the learning environment created by digital classroom technologies has any effect on the academic success and online technologies self-efficacy of 7th grade students. In this study, an experimental design with a pre-test/post-test control group was used. The research was conducted with 58 students in a secondary…

From the air to digital landscapes: generating reach-scale topographic models from aerial photography in gravel-bed rivers

NASA Astrophysics Data System (ADS)

Vericat, Damià; Narciso, Efrén; Béjar, Maria; Tena, Álvaro; Brasington, James; Gibbins, Chris; Batalla, Ramon J.

2014-05-01

Digital Terrain Models are fundamental to characterise landscapes, to support numerical modelling and to monitor topographic changes. Recent advances in topography, remote sensing and geomatics are providing new opportunities to obtain high density/quality and rapid topographic data. In this paper we present an integrated methodology to rapidly obtain reach scale topographic models of fluvial systems. This methodology has been tested and is being applied to develop event-scale terrain models of a 11-km river reach in the highly dynamic Upper Cinca (NE Iberian Peninsula). This research is conducted in the background of the project MorphSed. The methodology integrates (a) the acquisition of dense point clouds of the exposed floodplain (aerial photography and digital photogrammetry); (b) the registration of all observations to the same coordinate system (using RTK-GPS surveyed GCPs); (c) the acquisition of bathymetric data (using aDcp measurements integrated with RTK-GPS); (d) the intelligent decimation of survey observations (using the open source TopCat toolkit) and, finally, (e) data fusion (elaborating Digital Elevation Models). In this paper special emphasis is given to the acquisition and registration of point clouds. 3D point clouds are obtained from aerial photography and by means of automated digital photogrammetry. Aerial photographs are taken at 275 meters above the ground by means of a SLR digital camera manually operated from an autogyro. Four flight paths are defined in order to cover the 11 km long and 500 meters wide river reach. A total of 45 minutes are required to fly along these paths. Camera has been previously calibrated with the objective to ensure image resolution at around 5 cm. A total of 220 GCPs are deployed and RTK-GPS surveyed before the flight is conducted. Two people and one full workday are necessary to deploy and survey the full set of GCPs. Field data acquisition may be finalised in less than 2 days. Structure-from-Motion is subsequently applied in the lab using Agisoft PhotoScan, photographs are aligned and a 3d point cloud is generated. GCPs are used to geo-register all point clouds. This task may be time consuming since GCPs need to be identified in at least two of the pictures. A first automatic identification of GCPs positions is performed in the rest of the photos, although user supervision is necessary. Preliminary results show as geo-registration errors between 0.08 and and 0.10 meters can be obtained. The number of GCPs is being degraded and the quality of the point cloud assessed based on check points (the extracted GCPs). A critical analysis of GCPs density and scene locations is being performed (results in preparation). The results show that automated digital photogrammetry may provide new opportunities in the acquisition of topographic data at multiple temporal and spatial scales, being competitive with other more expensive techniques that, in turn, may require much more time to acquire field observations. SfM offers new opportunities to develop event-scale terrain models of fluvial systems suitable for hydraulic modelling and to study topographic change in highly dynamic environments.