A "Neogeographical Education"? The Geospatial Web, GIS and Digital Art in Adult Education

ERIC Educational Resources Information Center

Papadimitriou, Fivos

2010-01-01

Neogeography provides a link between the science of geography and digital art. The carriers of this link are geospatial technologies (global navigational satellite systems such as the global positioning system, Geographical Information System [GIS] and satellite imagery) along with ubiquitous information and communication technologies (such as…

Modeling of digital information optical encryption system with spatially incoherent illumination

NASA Astrophysics Data System (ADS)

Bondareva, Alyona P.; Cheremkhin, Pavel A.; Krasnov, Vitaly V.; Rodin, Vladislav G.; Starikov, Rostislav S.; Starikov, Sergey N.

2015-10-01

State of the art micromirror DMD spatial light modulators (SLM) offer unprecedented framerate up to 30000 frames per second. This, in conjunction with high speed digital camera, should allow to build high speed optical encryption system. Results of modeling of digital information optical encryption system with spatially incoherent illumination are presented. Input information is displayed with first SLM, encryption element - with second SLM. Factors taken into account are: resolution of SLMs and camera, holograms reconstruction noise, camera noise and signal sampling. Results of numerical simulation demonstrate high speed (several gigabytes per second), low bit error rate and high crypto-strength.

Engendering Climate Information Networks in Africa: Case Studies of Digital and FM Radio for Disseminating Disaster Early Warnings to Women and Youth

NASA Astrophysics Data System (ADS)

Stewart, M. M.; Pratt, M.

2002-05-01

This paper examines the effectiveness of FM and digital radio in disseminating weather and climate information to remote rural populations in Niger and Uganda. In Niger, poor communications infrastructure necessitated the establishment of a basic radio system as a first step towards disseminating climate information. Dissemination via digital radio is limited, in this context, by lack of technical support and the difficulty of maintaining computer equipment in the hot and dusty climate. Community FM stations have supported a range of mitigation activities that reduced vulnerability in all sites studied. Digital radio proved a more effective tool for disseminating climate information in Uganda, where technical knowledge is more prevalent and infrastructure networks are stronger. The primary challenge in Uganda lies in maintaining equipment in remote locations and disseminating information to a wider audience by linking with FM radio. Climate and weather information is already demonstrating positive impacts on agricultural production in Uganda, health and civil society in Niger, and on vulnerability reduction in both countries. Radio,particularly FM, was an excellent medium for disseminating information to women, youth, and other hard to reach populations. Discussion will focus on recommendations for improving the effectiveness of both systems and for practically linking FM and digital dissemination systems for better communication of climate information. Implications of the case studies will also be discussed in the context of digital and FM radio as media for disseminating other types of scientific information.

Using Digital Globes to Explore the Deep Sea and Advance Public Literacy in Earth System Science

ERIC Educational Resources Information Center

Beaulieu, Stace E.; Emery, Emery; Brickley, Annette; Spargo, Abbey; Patterson, Kathleen; Joyce, Katherine; Silva, Tim; Madin, Katherine

2015-01-01

Digital globes are new technologies increasingly used in informal and formal education to display global datasets and show connections among Earth systems. But how effective are digital globes in advancing public literacy in Earth system science? We addressed this question by developing new content for digital globes with the intent to educate and…

Digital Avionics Information System (DAIS): Training Requirements Analysis Model (TRAMOD).

ERIC Educational Resources Information Center

Czuchry, Andrew J.; And Others

The training requirements analysis model (TRAMOD) described in this report represents an important portion of the larger effort called the Digital Avionics Information System (DAIS) Life Cycle Cost (LCC) Study. TRAMOD is the second of three models that comprise an LCC impact modeling system for use in the early stages of system development. As…

Choosing a Global Positioning System Device for Use in U.S. Army Corps of Engineers Regulatory Districts

DTIC Science & Technology

2017-12-01

Information Systems Center of Expertise (RS/GIS CX) (CEERD-RZR), U.S. Army Engineer Research and Development Center, Cold Regions Research and...GIS Geographic Information Systems GPS Global Positioning System HH Handheld IWR U.S. Army Engineer Institute for Water Resources n/a Not...Applicable NAE U.S. Army New England Regulatory District RS/GIS Remote Sensing/Geographic Information Systems SD Secure Digital SDHC Secure Digital High

Methods, media and systems for managing a distributed application running in a plurality of digital processing devices

DOEpatents

Laadan, Oren; Nieh, Jason; Phung, Dan

2012-10-02

Methods, media and systems for managing a distributed application running in a plurality of digital processing devices are provided. In some embodiments, a method includes running one or more processes associated with the distributed application in virtualized operating system environments on a plurality of digital processing devices, suspending the one or more processes, and saving network state information relating to network connections among the one or more processes. The method further include storing process information relating to the one or more processes, recreating the network connections using the saved network state information, and restarting the one or more processes using the stored process information.

Shaking up Expectations: The OCLS Shake It! App

ERIC Educational Resources Information Center

Shivers, Cassandra

2012-01-01

The author, a digital access architect in the information systems department of the Orange County Library System in Florida, was given the challenge of creating a library mobile app around the 2009 holiday season. At that time, Sheri Chambers, digital content manager in the information systems department, and Debbie Moss, assistant director of the…

The Path of New Information Technology Affecting Educational Equality in the New Digital Divide--Based on Information System Success Model

ERIC Educational Resources Information Center

Zheng, Qian; Liang, Chang-Yong

2017-01-01

New information technology (new IT) plays an increasingly important role in the field of education, which greatly enriches the teaching means and promotes the sharing of education resources. However, because of the New Digital Divide existing, the impact of new IT on educational equality has yet to be discussed. Based on Information System Success…

Digital disaster evaluation and its application to 2015 Ms 8.1 Nepal Earthquake

NASA Astrophysics Data System (ADS)

WANG, Xiaoqing; LV, Jinxia; DING, Xiang; DOU, Aixia

2016-11-01

The purpose of the article is to probe the technique resolution of disaster information extraction and evaluation from the digital RS images based on the internet environment and aided by the social and geographic information. The solution is composed with such methods that the fast post-disaster assessment system will assess automatically the disaster area and grade, the multi-phase satellite and airborne high resolution digital RS images will provide the basis to extract the disaster areas or spots, assisted by the fast position of potential serious damage risk targets according to the geographic, administrative, population, buildings and other information in the estimated disaster region, the 2D digital map system or 3D digital earth system will provide platforms to interpret cooperatively the damage information in the internet environment, and further to estimate the spatial distribution of damage index or intensity, casualties or economic losses, which are very useful for the decision-making of emergency rescue and disaster relief, resettlement and reconstruction. The spatial seismic damage distribution of 2015 Ms 8.1 Nepal earthquake, as an example of the above solution, is evaluated by using the high resolution digital RS images, auxiliary geographic information and ground survey. The results are compared with the statistical disaster information issued by the ground truth by field surveying, and show good consistency.

A flexible, open, decentralized system for digital pathology networks.

PubMed

Schuler, Robert; Smith, David E; Kumaraguruparan, Gowri; Chervenak, Ann; Lewis, Anne D; Hyde, Dallas M; Kesselman, Carl

2012-01-01

High-resolution digital imaging is enabling digital archiving and sharing of digitized microscopy slides and new methods for digital pathology. Collaborative research centers, outsourced medical services, and multi-site organizations stand to benefit from sharing pathology data in a digital pathology network. Yet significant technological challenges remain due to the large size and volume of digitized whole slide images. While information systems do exist for managing local pathology laboratories, they tend to be oriented toward narrow clinical use cases or offer closed ecosystems around proprietary formats. Few solutions exist for networking digital pathology operations. Here we present a system architecture and implementation of a digital pathology network and share results from a production system that federates major research centers.

A Flexible, Open, Decentralized System for Digital Pathology Networks

PubMed Central

SMITH, David E.; KUMARAGURUPARAN, Gowri; CHERVENAK, Ann; LEWIS, Anne D.; HYDE, Dallas M.; KESSELMAN, Carl

2014-01-01

High-resolution digital imaging is enabling digital archiving and sharing of digitized microscopy slides and new methods for digital pathology. Collaborative research centers, outsourced medical services, and multi-site organizations stand to benefit from sharing pathology data in a digital pathology network. Yet significant technological challenges remain due to the large size and volume of digitized whole slide images. While information systems do exist for managing local pathology laboratories, they tend to be oriented toward narrow clinical use cases or offer closed ecosystems around proprietary formats. Few solutions exist for networking digital pathology operations. Here we present a system architecture and implementation of a digital pathology network and share results from a production system that federates major research centers. PMID:22941985

National aerial photography program as a geographic information system resource

USGS Publications Warehouse

Light, Donald L.

1991-01-01

The National Aerial Photography Program (NAPP) is jointly funded by Federal agencies and States that choose to participate in a 50-50 cost sharing cooperative arrangement. The NAPP is designed to acquire black-and-white (B&W) or color infrared (CIR) photography at a scale of 1:40,000. The status of NAPP flying, now going into the first year of its second 5-year cycle, is reviewed to inform the user community of NAPP's coverage. The resolution, geometric quality and flight parameters are used to estimate the system's cartographic potential to produce orthophotoquads, digital elevation models, topographic maps and digital information to meet national map accuracy standards at 1:12,000 and 1:24,000-scale and serve as a geographic information system resource. Also, a technique is presented to compute the optimum scanning spot size (15 ??m) and storage required for converting the B&W or CIR photography to digital, machine-readable pixel form. The resulting digital NAPP data are suitable for a wide variety of new applications, including use in geographic information systems.

Picture archiving and communication system--Part one: Filmless radiology and distance radiology.

PubMed

De Backer, A I; Mortelé, K J; De Keulenaer, B L

2004-01-01

Picture archiving and communication system (PACS) is a collection of technologies used to carry out digital medical imaging. PACS is used to digitally acquire medical images from the various modalities, such as computed tomography (CT), magnetic resonance imaging (MRI), ultrasound, and digital projection radiography. The image data and pertinent information are transmitted to other and possibly remote locations over networks, where they may be displayed on computer workstations for soft copy viewing in multiple locations, thus permitting simultaneous consultations and almost instant reporting from radiologists at a distance. Data are secured and archived on digital media such as optical disks or tape, and may be automatically retrieved as necessary. Close integration with the hospital information system (HIS)--radiology information system (RIS) is critical for system functionality. Medical image management systems are maturing, providing access outside of the radiology department to images throughout the hospital via the Ethernet, at different hospitals, or from a home workstation if teleradiology has been implemented.

The needs of digital games content rating system in Malaysia

NASA Astrophysics Data System (ADS)

Hamid, Ros Syammimi; Shiratuddin, Norshuhada

2016-08-01

Numerous studies revealed that playing digital games with adverse contents can lead to negative effects. Therefore, this article presents a review of the harmful contents and the detrimental effects of playing digital games. Violent and sexual contents of digital games, digital games scenarios in Malaysia, and review of existing content rating system are covered. The review indicates that Malaysia should have its own digital games content ratings system to control the contents and inform the users about the contents of the games that they wish to consume.

42 CFR 37.42 - Chest radiograph specifications-digital radiography systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... resolution, modulation transfer function (MTF), image signal-to-noise and detective quantum efficiency must... Information Object Definitions, sections: Computed Radiography Image Information Object Definition; Digital X...

Digital Avionics Information System (DAIS): Mid-1980's Maintenance Task Analysis. Final Report.

ERIC Educational Resources Information Center

Czuchry, Andrew J.; And Others

The fundamental objective of the Digital Avionics Information System (DAIS) Life Cycle Cost (LCC) Study is to provide the Air Force with an enhanced in-house capability to incorporate LCC considerations during all stages of the system acquisition process. The purpose of this report is to describe the technical approach, results, and conclusions…

Digital Avionics Information System (DAIS): Impact of DAIS Concept on Life Cycle Cost--Supplement. Final Report.

ERIC Educational Resources Information Center

Goclowski, John C.; And Others

This supplement to a technical report providing the results of a preliminary investigation of the potential impact of the Digital Avionics Information System (DAIS) concept on system support personnel requirements and life cycle cost (LCC) includes: (1) additional details of the cost comparison of a hypothetical application of a conceptual…

Digital Avionics Information System (DAIS): Impact of DAIS Concept on Life Cycle Cost. Final Report.

ERIC Educational Resources Information Center

Goclowski, John C.; And Others

Designed to identify and quantify the potential impacts of the Digital Avionics Information System (DAIS) on weapon system personnel requirements and life cycle cost (LCC), this study postulated a typical close-air-support (CAS) mission avionics suite to serve as a basis for comparing present day and DAIS configuration specifications. The purpose…

Audit of a Scientific Data Center for Certification as a Trustworthy Digital Repository: A Case Study

NASA Astrophysics Data System (ADS)

Downs, R. R.; Chen, R. S.

2011-12-01

Services that preserve and enable future access to scientific data are necessary to ensure that the data that are being collected today will be available for use by future generations of scientists. Many data centers, archives, and other digital repositories are working to improve their ability to serve as long-term stewards of scientific data. Trust in sustainable data management and preservation capabilities of digital repositories can influence decisions to use these services to deposit or obtain scientific data. Building on the Open Archival Information System (OAIS) Reference Model developed by the Consultative Committee for Space Data Systems (CCSDS) and adopted by the International Organization for Standardization as ISO 14721:2003, new standards are being developed to improve long-term data management processes and documentation. The Draft Information Standard ISO/DIS 16363, "Space data and information transfer systems - Audit and certification of trustworthy digital repositories" offers the potential to evaluate digital repositories objectively in terms of their trustworthiness as long-term stewards of digital resources. In conjunction with this, the CCSDS and ISO are developing another draft standard for the auditing and certification process, ISO/DIS 16919, "Space data and information transfer systems - Requirements for bodies providing audit and certification of candidate trustworthy digital repositories". Six test audits were conducted of scientific data centers and archives in Europe and the United States to test the use of these draft standards and identify potential improvements for the standards and for the participating digital repositories. We present a case study of the test audit conducted on the NASA Socioeconomic Data and Applications Center (SEDAC) and describe the preparation, the audit process, recommendations received, and next steps to obtain certification as a trustworthy digital repository, after approval of the ISO/DIS standards.

Accelerating Harmonization in Digital Health.

PubMed

Moore, Carolyn; Werner, Laurie; BenDor, Amanda Puckett; Bailey, Mike; Khan, Nighat

2017-01-01

Digital tools play an important role in supporting front-line health workers who deliver primary care. This paper explores the current state of efforts undertaken to move away from single-purpose applications of digital health towards integrated systems and solutions that align with national strategies. Through examples from health information systems, data and health worker training, this paper demonstrates how governments and stakeholders are working to integrate digital health services. We emphasize three factors as crucial for this integration: development and implementation of national digital health strategies; technical interoperability and collaborative approaches to ensure that digital health has an impact on the primary care level. Consolidation of technologies will enable an integrated, scaleable approach to the use of digital health to support health workers. As this edition explores a paradigm shift towards harmonization in primary healthcare systems, this paper explores complementary efforts undertaken to move away from single-purpose applications of digital health towards integrated systems and solutions that align with national strategies. It describes a paradigm shift towards integrated and interoperable systems that respond to health workers' needs in training, data and health information; and calls for the consolidation and integration of digital health tools and approaches across health areas, functions and levels of the health system. It then considers the critical factors that must be in place to support this paradigm shift. This paper aims not only to describe steps taken to move from fractured pilots to effective systems, but to propose a new perspective focused on consolidation and collaboration guided by national digital health strategies.

Digital Natives and Digital Immigrants: A Study of Information Technology and Information Systems (IT/IS) Usage between Students and Faculty of Nigerian Universities

ERIC Educational Resources Information Center

Ololube, Nwachukwu Prince; Kpolovie, Peter James; Amaele, Samuel; Amanchukwu, Rose N.; Briggs, Teinye

2013-01-01

It is presumed that Nigerian students and teachers have been unable to find effective ways to use technology in the classroom and other aspects of their teaching and learning. Yet, considerable debate remains over the most efficient techniques and procedures to measure students and faculties information technology and information systems (IT/IS)…

Discussion on the management system technology implementation of multimedia classrooms in the digital campus

NASA Astrophysics Data System (ADS)

Wang, Bo

2018-04-01

Based on the digitized information and network, digital campus is an integration of teaching, management, science and research, life service and technology service, and it is one of the current mainstream construction form of campus function. This paper regarded the "mobile computing" core digital environment construction development as the background, explored the multiple management system technology content design and achievement of multimedia classrooms in digital campus and scientifically proved the technology superiority of management system.

IQARIS : a tool for the intelligent querying, analysis, and retrieval from information systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hummel, J. R.; Silver, R. B.

Information glut is one of the primary characteristics of the electronic age. Managing such large volumes of information (e.g., keeping track of the types, where they are, their relationships, who controls them, etc.) can be done efficiently with an intelligent, user-oriented information management system. The purpose of this paper is to describe a concept for managing information resources based on an intelligent information technology system developed by the Argonne National Laboratory for managing digital libraries. The Argonne system, Intelligent Query (IQ), enables users to query digital libraries and view the holdings that match the query from different perspectives.

Digital Elevation Models

USGS Publications Warehouse

,

1993-01-01

The Earth Science Information Center (ESIC) distributes digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data files may be grouped into four basic types. The first of these, called a Digital Line Graph (DLG), is the line map information in digital form. These data files include information on base data categories, such as transportation, hypsography, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for a number of ground positions at regularly spaced intervals. The third type is Land Use and Land Cover digital data which provides information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for all known places, features, and areas in the United States identified by a proper name.

Digital line graphs from 1:24,000-scale maps

USGS Publications Warehouse

,

1990-01-01

The Earth Science Information Centers (ESIC) distribute digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data flles are grouped into four basic types. The first of these, called a Digital Line . Graph (DLG), is line map information in digital form. These data files include information on planimetric base categories, such as transportation, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for a number of ground positions that are usually at regularly spaced intervals. The third type is Land Use and Land Cover digital data, which provides information on nine major classes of land use such as urban, agricultural, or forest as wen as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for all known places, features, and areas in the United States identified by a proper name.

Digital line graphs from 1:100,000-scale maps

USGS Publications Warehouse

,

1989-01-01

The National Cartographic Information Center (NCIC) distributes digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. Digital cartographic data files may be grouped into four basic types. The first of these, called a Digital Line Graph (DLG), is line map information in digital form. These data files include information on planimetric base categories, such as transportation, hydrography, and boundaries. The second form, called a Digital Elevation Model (OEM), consists of a sampled array of elevations for ground positions that are usually, but not always, at regularly spaced intervals. The third type is Land Use and Land Cover digital data, which provides information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for known places, features, and areas in the United States identified by a proper name.

Agricultural land cover mapping in the context of a geographically referenced digital information system. [Carroll, Macon, and Gentry Counties, Missouri

NASA Technical Reports Server (NTRS)

Stoner, E. R.

1982-01-01

The introduction of soil map information to the land cover mapping process can improve discrimination of land cover types and reduce confusion among crop types that may be caused by soil-specific management practices and background reflectance characteristics. Multiple dates of LANDSAT MSS digital were analyzed for three study areas in northern Missouri to produce cover types for major agricultural land cover classes. Digital data bases were then developed by adding ancillary data such as digitized soil and transportation network information to the LANDSAT-derived cover type map. Procedures were developed to manipulate the data base parameters to extract information applicable to user requirements. An agricultural information system combining such data can be used to determine the productive capacity of land to grow crops, fertilizer needs, chemical weed control rates, irrigation suitability, and trafficability of soil for planting.

Connecting Land-Based Networks to Ships

DTIC Science & Technology

2013-06-01

multipoint wireless broadband systems, and WiMAX networks were initially deployed for fixed and nomadic (portable) applications. These standards...CAPABILITIES OF SHIP-TO-SHORE COMMUNICATIONS A. US Navy Automated Digital Network System (ADNS) The U.S. Navy’s Automated Digital Network System (ADNS...submit digitally any necessary documents to the terminal operators, contact their logistics providers, access tidal information and receive

Digital Troposcatter Performance Model

DTIC Science & Technology

1983-12-01

Dist Speia DIIBUTON STATEMR AO Approved tot public relemg ** - DistributionUnlimited __________ Communications. Control and Information Systems ...for digital troposcatter communication system design is described. Propagation and modem performance *are modeled. These include Path Loss and RSL...designing digital troposcatter systems . A User’s Manual Report discusses the use of the computer program TROPO. The description of the structure and logical

Disseminating relevant health information to underserved audiences: implications of the Digital Divide Pilot Projects*

PubMed Central

Kreps, Gary L.

2005-01-01

Objective: This paper examines the influence of the digital divide on disparities in health outcomes for vulnerable populations, identifying implications for medical and public libraries. Method: The paper describes the results of the Digital Divide Pilot Projects demonstration research programs funded by the National Cancer Institute to test new strategies for disseminating relevant health information to underserved and at-risk audiences. Results: The Digital Divide Pilot Projects field-tested innovative systemic strategies for helping underserved populations access and utilize relevant health information to make informed health-related decisions about seeking appropriate health care and support, resisting avoidable and significant health risks, and promoting their own health. Implications: The paper builds on the Digital Divide Pilot Projects by identifying implications for developing health communication strategies that libraries can adopt to provide digital health information to vulnerable populations. PMID:16239960

49 CFR 38.61 - Public information system.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY... transportation system personnel, or recorded or digitized human speech messages, to announce stations and provide... public address system to permit transportation system personnel, or recorded or digitized human speech...

Doppler extraction with a digital VCO

NASA Technical Reports Server (NTRS)

Starner, E. R.; Nossen, E. J.

1977-01-01

Digitally controlled oscillator in phased-locked loop may be useful for data communications systems, or may be modified to serve as information extraction component of microwave or optical system for collision avoidance or automatic braking. Instrument is frequency-synthesizing device with output specified precisely by digital number programmed into frequency register.

Systems of Knowledge Organization for Digital Libraries: Beyond Traditional Authority Files.

ERIC Educational Resources Information Center

Hodge, Gail

This report provides an overview of knowledge organization systems (KOSs) and includes pertinent examples of their application to digital materials, offering extensive practical information for institutions embarking on digital library initiatives. The first section of the report defines the general characteristics of KOSs, with emphasis on their…

Abstracts of SIG Sessions.

ERIC Educational Resources Information Center

Proceedings of the ASIS Annual Meeting, 1996

1996-01-01

Includes abstracts of special interest group (SIG) sessions. Highlights include digital imagery; text summarization; browsing; digital libraries; icons and the Web; information management; curricula planning; interfaces; information systems; theories; scholarly and scientific communication; global development; archives; document delivery;…

Information Literacy: Requirements of the 21st Century Workplace.

ERIC Educational Resources Information Center

Beam, Walter R.

2001-01-01

Discusses business and technology trends that affect the need for employees to have more information skills. Highlights include the globalization of commerce; competition; lower-cost digital technology; employment trends; the role of digital systems; the impact of technology; advanced information-related literacy skills; and future education…

The digital language of amino acids.

PubMed

Kurić, L

2007-11-01

The subject of this paper is a digital approach to the investigation of the biochemical basis of genetic processes. The digital mechanism of nucleic acid and protein bio-syntheses, the evolution of biomacromolecules and, especially, the biochemical evolution of genetic language have been analyzed by the application of cybernetic methods, information theory and system theory, respectively. This paper reports the discovery of new methods for developing the new technologies in genetics. It is about the most advanced digital technology which is based on program, cybernetics and informational systems and laws. The results in the practical application of the new technology could be useful in bioinformatics, genetics, biochemistry, medicine and other natural sciences.

7 CFR 1755.901 - Incorporation by Reference.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., Digital Systems and Networks, Transmission media characteristics—Optical fibre cables, Characteristics of... Systems and Media, Digital Systems and Networks, Transmission media characteristics—Optical fibre cables... National Archives and Records Administration (NARA). For information on the availability of these materials...

Mathematic Model of Digital Control System with PID Regulator and Regular Step of Quantization with Information Transfer via the Channel of Plural Access

NASA Astrophysics Data System (ADS)

Abramov, G. V.; Emeljanov, A. E.; Ivashin, A. L.

Theoretical bases for modeling a digital control system with information transfer via the channel of plural access and a regular quantization cycle are submitted. The theory of dynamic systems with random changes of the structure including elements of the Markov random processes theory is used for a mathematical description of a network control system. The characteristics of similar control systems are received. Experimental research of the given control systems is carried out.

Land use and land cover digital data from 1:250,000- and 1:100,000- scale maps

USGS Publications Warehouse

,

1990-01-01

The Earth Science Information Centers (ESIC) distribute digital cartographic/geographic data files produced by the U.S. Geological Survey (USGS) as part of the National Mapping Program. The data files are grouped into four basic types. The first type, called a Digital Line Graph (DLG), is line map information in digital form. These data files include information on planimetric base categories, such as transportation, hydrography, and boundaries. The second type, called a Digital Elevation Model (DEM), consists of a sampled array of elevations for ground positions that are usually at regularly spaced intervals. The third type, Land Use and Land Cover digital data, provide information on nine major classes of land use such as urban, agricultural, or forest as well as associated map data such as political units and Federal land ownership. The fourth type, the Geographic Names Information System, provides primary information for known places, features, and areas in the United States identified by a proper name.

Are We Ready for Another Change? Digital Signatures Can Change How We Handle the Academic Record

ERIC Educational Resources Information Center

Black, Thomas C.; Mohr, John

2004-01-01

In this electronic age, where information is digital and service is virtual, the registrar profession is changing rapidly to keep up with increasing standards and expectations. EDI and now XML standards enable system-to-system exchanges of academic records information. While many of the registrar's profession display student academic records under…

Educating Information Systems Students on Business Process Management (BPM) through Digital Gaming Metaphors of Virtual Reality

ERIC Educational Resources Information Center

Lawler, James P.; Joseph, Anthony

2010-01-01

Digital gaming continues to be an approach for enhancing methods of pedagogy. The study evaluates the effectiveness of a gaming product of a leading technology firm in engaging graduate students in an information systems course at a major northeast institution. Findings from a detailed perception survey of the students indicate favorable…

BPSK Demodulation Using Digital Signal Processing

NASA Technical Reports Server (NTRS)

Garcia, Thomas R.

1996-01-01

A digital communications signal is a sinusoidal waveform that is modified by a binary (digital) information signal. The sinusoidal waveform is called the carrier. The carrier may be modified in amplitude, frequency, phase, or a combination of these. In this project a binary phase shift keyed (BPSK) signal is the communication signal. In a BPSK signal the phase of the carrier is set to one of two states, 180 degrees apart, by a binary (i.e., 1 or 0) information signal. A digital signal is a sampled version of a "real world" time continuous signal. The digital signal is generated by sampling the continuous signal at discrete points in time. The rate at which the signal is sampled is called the sampling rate (f(s)). The device that performs this operation is called an analog-to-digital (A/D) converter or a digitizer. The digital signal is composed of the sequence of individual values of the sampled BPSK signal. Digital signal processing (DSP) is the modification of the digital signal by mathematical operations. A device that performs this processing is called a digital signal processor. After processing, the digital signal may then be converted back to an analog signal using a digital-to-analog (D/A) converter. The goal of this project is to develop a system that will recover the digital information from a BPSK signal using DSP techniques. The project is broken down into the following steps: (1) Development of the algorithms required to demodulate the BPSK signal; (2) Simulation of the system; and (3) Implementation a BPSK receiver using digital signal processing hardware.

Cartographic services contract...for everything geographic

USGS Publications Warehouse

,

2003-01-01

The U.S. Geological Survey's (USGS) Cartographic Services Contract (CSC) is used to award work for photogrammetric and mapping services under the umbrella of Architect-Engineer (A&E) contracting. The A&E contract is broad in scope and can accommodate any activity related to standard, nonstandard, graphic, and digital cartographic products. Services provided may include, but are not limited to, photogrammetric mapping and aerotriangulation; orthophotography; thematic mapping (for example, land characterization); analog and digital imagery applications; geographic information systems development; surveying and control acquisition, including ground-based and airborne Global Positioning System; analog and digital image manipulation, analysis, and interpretation; raster and vector map digitizing; data manipulations (for example, transformations, conversions, generalization, integration, and conflation); primary and ancillary data acquisition (for example, aerial photography, satellite imagery, multispectral, multitemporal, and hyperspectral data); image scanning and processing; metadata production, revision, and creation; and production or revision of standard USGS products defined by formal and informal specification and standards, such as those for digital line graphs, digital elevation models, digital orthophoto quadrangles, and digital raster graphics.

Procedure for extraction of disparate data from maps into computerized data bases

NASA Technical Reports Server (NTRS)

Junkin, B. G.

1979-01-01

A procedure is presented for extracting disparate sources of data from geographic maps and for the conversion of these data into a suitable format for processing on a computer-oriented information system. Several graphic digitizing considerations are included and related to the NASA Earth Resources Laboratory's Digitizer System. Current operating procedures for the Digitizer System are given in a simplified and logical manner. The report serves as a guide to those organizations interested in converting map-based data by using a comparable map digitizing system.

Operational viewpoint of the X-29A digital flight control system

NASA Technical Reports Server (NTRS)

Chacon, Vince; Mcbride, David

1988-01-01

In the past few years many flight control systems have been implemented as full-authority, full-time digital systems. The digital design has allowed flight control systems to make use of many enhanced elements that are generally considered too complex to implement in an analog system. Examples of these elements are redundant information exchanged between channels to allow for continued operation after multiple failures and multiple variable gain schedules to optimize control of the aircraft throughout its flight envelope and in all flight modes. The introduction of the digital system for flight control also created the problem of obtaining information from the system in an understandable and useful format. This paper presents how the X-29A was dealt with during its operations at NASA Ames-Dryden Flight Research Facility. A brief description of the X-29A control system, a discussion of the tools developed to aid in daily operations, and the troubleshooting of the aircraft are included.

Application of mobile digital communications in law enforcement, an introductory planning guide

NASA Technical Reports Server (NTRS)

Sohn, R. L.; Abraham, J. E.; Leflang, W. G.; Kennedy, R. D.; Wilson, J. H.; Gurfield, R. M.

1975-01-01

A set of planning guidelines for the application of digital communications techniques to law enforcement use is presented. Some essential characteristics of digital techniques and their applications are outlined, as are some principles of system analysis, evaluation, and planning. Requirements analysis, system concept design, implementation planning, and performance and cost modeling are described and demonstrated with respect to this application problem. Information on law enforcement digital communications systems and equipment and a list of vendor sources are given in appendices.

Multimodal digital color imaging system for facial skin lesion analysis

NASA Astrophysics Data System (ADS)

Bae, Youngwoo; Lee, Youn-Heum; Jung, Byungjo

2008-02-01

In dermatology, various digital imaging modalities have been used as an important tool to quantitatively evaluate the treatment effect of skin lesions. Cross-polarization color image was used to evaluate skin chromophores (melanin and hemoglobin) information and parallel-polarization image to evaluate skin texture information. In addition, UV-A induced fluorescent image has been widely used to evaluate various skin conditions such as sebum, keratosis, sun damages, and vitiligo. In order to maximize the evaluation efficacy of various skin lesions, it is necessary to integrate various imaging modalities into an imaging system. In this study, we propose a multimodal digital color imaging system, which provides four different digital color images of standard color image, parallel and cross-polarization color image, and UV-A induced fluorescent color image. Herein, we describe the imaging system and present the examples of image analysis. By analyzing the color information and morphological features of facial skin lesions, we are able to comparably and simultaneously evaluate various skin lesions. In conclusion, we are sure that the multimodal color imaging system can be utilized as an important assistant tool in dermatology.

Business use of satellite communications

NASA Astrophysics Data System (ADS)

Edelson, B. I.; Cooper, R. S.

1982-02-01

The development, systems technology, and future applications of digital transmission systems for business use of satellite systems are explored. Intelsat currently has 22 satellites in space, applied mostly to data, telephone, and television transmission. An all digital communications network called the Integrated Services Digital Network is replacing the former, analog, systems with wideband digital transmission for voice, data, video, and industrial control information, with domestic satellites serving as the central node of transmissions in a service area. The digital systems are faster than the analog systems, and the U.S. Postal Service is developing an electronic mail system with six other countries. Various magazines are now teleprinted in various locations from broadcasts from a central source, and chain stores are employing data transmission for centralized management, inventory, and procurement.

Migration of Older to New Digital Control Systems in Nuclear Power Plant Main Control Rooms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kovesdi, Casey Robert; Joe, Jeffrey Clark

The United States (U.S.) Department of Energy (DOE) Office of Nuclear Energy (NE) has the primary mission to advance nuclear power by resolving socio-technical issues through research and development (R&D). One DOE-NE activity supporting this mission is the Light Water Reactor Sustainability (LWRS) program. LWRS has the overall objective to sustain the operation of existing commercial nuclear power plants (NPPs) through conducting R&D across multiple “pathways,” or R&D focus areas. The Advanced Instrumentation, Information, and Control (II&C) Systems Technologies pathway conducts targeted R&D to address aging and reliability concerns with the legacy instrumentation and control (I&C) and related information systemsmore » in operating U.S. NPPs. This work involves (1) ensuring that legacy analog II&C systems are not life-limiting issues for the LWR fleet, and (2) implementing digital II&C technology in a manner that enables broad innovation and business improvement in the NPP operating model. Under the LWRS Advanced II&C pathway, Human Factors experts at Idaho National Laboratory (INL) have been conducting R&D in support of NPP main control room (MCR) modernization activities. Work in prior years has focused on migrating analog I&C systems to new digital I&C systems (). In fiscal year 2016 (FY16), one new focus area for this research is migrating older digital I&C systems to new and advanced digital I&C systems. This report summarizes a plan for conducting a digital-to-digital migration of a legacy digital I&C system to a new digital I&C system in support of control room modernization activities.« less

A Content Standard for Computational Models; Digital Rights Management (DRM) Architectures; A Digital Object Approach to Interoperable Rights Management: Finely-Grained Policy Enforcement Enabled by a Digital Object Infrastructure; LOCKSS: A Permanent Web Publishing and Access System; Tapestry of Time and Terrain.

ERIC Educational Resources Information Center

Hill, Linda L.; Crosier, Scott J.; Smith, Terrence R.; Goodchild, Michael; Iannella, Renato; Erickson, John S.; Reich, Vicky; Rosenthal, David S. H.

2001-01-01

Includes five articles. Topics include requirements for a content standard to describe computational models; architectures for digital rights management systems; access control for digital information objects; LOCKSS (Lots of Copies Keep Stuff Safe) that allows libraries to run Web caches for specific journals; and a Web site from the U.S.…

Feed-forward digital phase and amplitude correction system

DOEpatents

Yu, D.U.L.; Conway, P.H.

1994-11-15

Phase and amplitude modifications in repeatable RF pulses at the output of a high power pulsed microwave amplifier are made utilizing a digital feed-forward correction system. A controlled amount of the output power is coupled to a correction system for processing of phase and amplitude information. The correction system comprises circuitry to compare the detected phase and amplitude with the desired phase and amplitude, respectively, and a digitally programmable phase shifter and attenuator and digital logic circuitry to control the phase shifter and attenuator. The phase and amplitude of subsequent are modified by output signals from the correction system. 11 figs.

Feed-forward digital phase and amplitude correction system

DOEpatents

Yu, David U. L.; Conway, Patrick H.

1994-01-01

Phase and amplitude modifications in repeatable RF pulses at the output of a high power pulsed microwave amplifier are made utilizing a digital feed-forward correction system. A controlled amount of the output power is coupled to a correction system for processing of phase and amplitude information. The correction system comprises circuitry to compare the detected phase and amplitude with the desired phase and amplitude, respectively, and a digitally programmable phase shifter and attenuator and digital logic circuitry to control the phase shifter and attenuator. The Phase and amplitude of subsequent are modified by output signals from the correction system.

Approach to spatial information security based on digital certificate

NASA Astrophysics Data System (ADS)

Cong, Shengri; Zhang, Kai; Chen, Baowen

2005-11-01

With the development of the online applications of geographic information systems (GIS) and the spatial information services, the spatial information security becomes more important. This work introduced digital certificates and authorization schemes into GIS to protect the crucial spatial information combining the techniques of the role-based access control (RBAC), the public key infrastructure (PKI) and the privilege management infrastructure (PMI). We investigated the spatial information granularity suited for sensitivity marking and digital certificate model that fits the need of GIS security based on the semantics analysis of spatial information. It implements a secure, flexible, fine-grained data access based on public technologies in GIS in the world.

Loran-C digital word generator for use with a KIM-1 microprocessor system

NASA Technical Reports Server (NTRS)

Nickum, J. D.

1977-01-01

The problem of translating the time of occurrence of received Loran-C pulses into a time, referenced to a particular period of occurrence is addressed and applied to the design of a digital word generator for a Loran-C sensor processor package. The digital information from this word generator is processed in a KIM-1 microprocessor system which is based on the MOS 6502 CPU. This final system will consist of a complete time difference sensor processor for determining position information using Loran-C charts. The system consists of the KIM-1 microprocessor module, a 4K RAM memory board, a user interface, and the Loran-C word generator.

Information collection and processing of dam distortion in digital reservoir system

NASA Astrophysics Data System (ADS)

Liang, Yong; Zhang, Chengming; Li, Yanling; Wu, Qiulan; Ge, Pingju

2007-06-01

The "digital reservoir" is usually understood as describing the whole reservoir with digital information technology to make it serve the human existence and development furthest. Strictly speaking, the "digital reservoir" is referred to describing vast information of the reservoir in different dimension and space-time by RS, GPS, GIS, telemetry, remote-control and virtual reality technology based on computer, multi-media, large-scale memory and wide-band networks technology for the human existence, development and daily work, life and entertainment. The core of "digital reservoir" is to realize the intelligence and visibility of vast information of the reservoir through computers and networks. The dam is main building of reservoir, whose safety concerns reservoir and people's safety. Safety monitoring is important way guaranteeing the dam's safety, which controls the dam's running through collecting the dam's information concerned and developing trend. Safety monitoring of the dam is the process from collection and processing of initial safety information to forming safety concept in the brain. The paper mainly researches information collection and processing of the dam by digital means.

Visualization and interaction tools for aerial photograph mosaics

NASA Astrophysics Data System (ADS)

Fernandes, João Pedro; Fonseca, Alexandra; Pereira, Luís; Faria, Adriano; Figueira, Helder; Henriques, Inês; Garção, Rita; Câmara, António

1997-05-01

This paper describes the development of a digital spatial library based on mosaics of digital orthophotos, called Interactive Portugal, that will enable users both to retrieve geospatial information existing in the Portuguese National System for Geographic Information World Wide Web server, and to develop local databases connected to the main system. A set of navigation, interaction, and visualization tools are proposed and discussed. They include sketching, dynamic sketching, and navigation capabilities over the digital orthophotos mosaics. Main applications of this digital spatial library are pointed out and discussed, namely for education, professional, and tourism markets. Future developments are considered. These developments are related to user reactions, technological advancements, and projects that also aim at delivering and exploring digital imagery on the World Wide Web. Future capabilities for site selection and change detection are also considered.

Electronic health record meets digital library: a new environment for achieving an old goal.

PubMed

Humphreys, B L

2000-01-01

Linking the electronic health record to the digital library is a Web-era reformulation of the long-standing informatics goal of seamless integration of automated clinical data and relevant knowledge-based information to support informed decisions. The spread of the Internet, the development of the World Wide Web, and converging format standards for electronic health data and digital publications make effective linking increasingly feasible. Some existing systems link electronic health data and knowledge-based information in limited settings or limited ways. Yet many challenging informatics research problems remain to be solved before flexible and seamless linking becomes a reality and before systems become capable of delivering the specific piece of information needed at the time and place a decision must be made. Connecting the electronic health record to the digital library also requires positive resolution of important policy issues, including health data privacy, government encouragement of high-speed communications, electronic intellectual property rights, and standards for health data and for digital libraries. Both the research problems and the policy issues should be important priorities for the field of medical informatics.

Electronic Health Record Meets Digital Library

PubMed Central

Humphreys, Betsy L.

2000-01-01

Linking the electronic health record to the digital library is a Web-era reformulation of the long-standing informatics goal of seamless integration of automated clinical data and relevant knowledge-based information to support informed decisions. The spread of the Internet, the development of the World Wide Web, and converging format standards for electronic health data and digital publications make effective linking increasingly feasible. Some existing systems link electronic health data and knowledge-based information in limited settings or limited ways. Yet many challenging informatics research problems remain to be solved before flexible and seamless linking becomes a reality and before systems become capable of delivering the specific piece of information needed at the time and place a decision must be made. Connecting the electronic health record to the digital library also requires positive resolution of important policy issues, including health data privacy, government envouragement of high-speed communications, electronic intellectual property rights, and standards for health data and for digital libraries. Both the research problems and the policy issues should be important priorities for the field of medical informatics. PMID:10984463

Digital Avionics Information System (DAIS): Reliability and Maintainability Model Users Guide. Final Report, May 1975-July 1977.

ERIC Educational Resources Information Center

Czuchry, Andrew J.; And Others

This report provides a complete guide to the stand alone mode operation of the reliability and maintenance (R&M) model, which was developed to facilitate the performance of design versus cost trade-offs within the digital avionics information system (DAIS) acquisition process. The features and structure of the model, its input data…

A Match in the Making: How Emergent Changes in the Marketing Discipline Present Opportunities for Information Systems Programs

ERIC Educational Resources Information Center

Carley, Maureen; Babb, Jeffry

2015-01-01

The digital revolution is upon us, bringing with it disruptive forces in every aspect of business and personal interactions. The business marketing function has become so technologically driven it is sometimes hard to tell where the boundaries between the Marketing and Information Systems disciplines lie. The new world of digital marketing has…

Advanced digital image archival system using MPEG technologies

NASA Astrophysics Data System (ADS)

Chang, Wo

2009-08-01

Digital information and records are vital to the human race regardless of the nationalities and eras in which they were produced. Digital image contents are produced at a rapid pace from cultural heritages via digitalization, scientific and experimental data via high speed imaging sensors, national defense satellite images from governments, medical and healthcare imaging records from hospitals, personal collection of photos from digital cameras. With these mass amounts of precious and irreplaceable data and knowledge, what standards technologies can be applied to preserve and yet provide an interoperable framework for accessing the data across varieties of systems and devices? This paper presents an advanced digital image archival system by applying the international standard of MPEG technologies to preserve digital image content.

The research and realization of digital management platform for ultra-precision optical elements within life-cycle

NASA Astrophysics Data System (ADS)

Wang, Juan; Wang, Jian; Li, Lijuan; Zhou, Kun

2014-08-01

In order to solve the information fusion, process integration, collaborative design and manufacturing for ultra-precision optical elements within life-cycle management, this paper presents a digital management platform which is based on product data and business processes by adopting the modern manufacturing technique, information technique and modern management technique. The architecture and system integration of the digital management platform are discussed in this paper. The digital management platform can realize information sharing and interaction for information-flow, control-flow and value-stream from user's needs to offline in life-cycle, and it can also enhance process control, collaborative research and service ability of ultra-precision optical elements.

The development of digital library system for drug research information.

PubMed

Kim, H J; Kim, S R; Yoo, D S; Lee, S H; Suh, O K; Cho, J H; Shin, H T; Yoon, J P

1998-01-01

The sophistication of computer technology and information transmission on internet has made various cyber information repository available to information consumers. In the era of information super-highway, the digital library which can be accessed from remote sites at any time is considered the prototype of information repository. Using object-oriented DBMS, the very first model of digital library for pharmaceutical researchers and related professionals in Korea has been developed. The published research papers and researchers' personal information was included in the database. For database with research papers, 13 domestic journals were abstracted and scanned for full-text image files which can be viewed by Internet web browsers. The database with researchers' personal information was also developed and interlinked to the database with research papers. These database will be continuously updated and will be combined with world-wide information as the unique digital library in the field of pharmacy.

Digital Libraries--Methods and Applications

ERIC Educational Resources Information Center

Huang, Kuo Hung, Ed.

2011-01-01

Digital library is commonly seen as a type of information retrieval system which stores and accesses digital content remotely via computer networks. However, the vision of digital libraries is not limited to technology or management, but user experience. This book is an attempt to share the practical experiences of solutions to the operation of…

Java-based cryptosystem for PACS and tele-imaging

NASA Astrophysics Data System (ADS)

Tjandra, Donny; Wong, Stephen T. C.; Yu, Yuan-Pin

1998-07-01

Traditional PACS systems are based on two-tier client server architectures, and require the use of costly, high-end client workstations for image viewing. Consequently, PACS systems using the two-tier architecture do not scale well as data increases in size and complexity. Furthermore, use of dedicated viewing workstations incurs costs in deployment and maintenance. To address these issues, the use of digital library technologies, such as the World Wide Web, Java, and CORBA, is being explored to distribute PACS data to serve a broader range of healthcare providers in an economic and efficient manner. Integration of PACS systems with digital library technologies allows access to medical information through open networks such as the Internet. However, use of open networks to transmit medical data introduces problems with maintaining privacy and integrity of patient information. Cryptography and digital timestamping is used to protect sensitive information from unauthorized access or tampering. A major concern when using cryptography and digital timestamping is the performance degradation associated with the mathematical calculations needed to encrypt/decrypt an image dataset, or to calculate the hash value of an image. The performance issue is compounded by the extra layer associated with the CORBA middleware, and the use of programming languages interpreted at the client side, such as Java. This paper study the extent to which Java-based cryptography and digital timestamping affects performance in a PACS system integrated with digital library technologies.

Routine Digital Pathology Workflow: The Catania Experience

PubMed Central

Fraggetta, Filippo; Garozzo, Salvatore; Zannoni, Gian Franco; Pantanowitz, Liron; Rossi, Esther Diana

2017-01-01

Introduction: Successful implementation of whole slide imaging (WSI) for routine clinical practice has been accomplished in only a few pathology laboratories worldwide. We report the transition to an effective and complete digital surgical pathology workflow in the pathology laboratory at Cannizzaro Hospital in Catania, Italy. Methods: All (100%) permanent histopathology glass slides were digitized at ×20 using Aperio AT2 scanners. Compatible stain and scanning slide racks were employed to streamline operations. eSlide Manager software was bidirectionally interfaced with the anatomic pathology laboratory information system. Virtual slide trays connected to the two-dimensional (2D) barcode tracking system allowed pathologists to confirm that they were correctly assigned slides and that all tissues on these glass slides were scanned. Results: Over 115,000 glass slides were digitized with a scan fail rate of around 1%. Drying glass slides before scanning minimized them sticking to scanner racks. Implementation required introduction of a 2D barcode tracking system and modification of histology workflow processes. Conclusion: Our experience indicates that effective adoption of WSI for primary diagnostic use was more dependent on optimizing preimaging variables and integration with the laboratory information system than on information technology infrastructure and ensuring pathologist buy-in. Implementation of digital pathology for routine practice not only leveraged the benefits of digital imaging but also creates an opportunity for establishing standardization of workflow processes in the pathology laboratory. PMID:29416914

Routine Digital Pathology Workflow: The Catania Experience.

PubMed

Fraggetta, Filippo; Garozzo, Salvatore; Zannoni, Gian Franco; Pantanowitz, Liron; Rossi, Esther Diana

2017-01-01

Successful implementation of whole slide imaging (WSI) for routine clinical practice has been accomplished in only a few pathology laboratories worldwide. We report the transition to an effective and complete digital surgical pathology workflow in the pathology laboratory at Cannizzaro Hospital in Catania, Italy. All (100%) permanent histopathology glass slides were digitized at ×20 using Aperio AT2 scanners. Compatible stain and scanning slide racks were employed to streamline operations. eSlide Manager software was bidirectionally interfaced with the anatomic pathology laboratory information system. Virtual slide trays connected to the two-dimensional (2D) barcode tracking system allowed pathologists to confirm that they were correctly assigned slides and that all tissues on these glass slides were scanned. Over 115,000 glass slides were digitized with a scan fail rate of around 1%. Drying glass slides before scanning minimized them sticking to scanner racks. Implementation required introduction of a 2D barcode tracking system and modification of histology workflow processes. Our experience indicates that effective adoption of WSI for primary diagnostic use was more dependent on optimizing preimaging variables and integration with the laboratory information system than on information technology infrastructure and ensuring pathologist buy-in. Implementation of digital pathology for routine practice not only leveraged the benefits of digital imaging but also creates an opportunity for establishing standardization of workflow processes in the pathology laboratory.

The impact of European Registers of Road Transport Undertakings on security and enforcement of the system of digital tachograph

NASA Astrophysics Data System (ADS)

Rychter, M.; Rychter, R.

2016-09-01

Secure digital tachograph system is indisputably a means having the great influence on road safety, enforcement of the social conditions for drivers in road transport as well as supporting the fair competition between road transport undertakings. In order to better monitor the compliance of road transport with the rules in force, inter alia the provisions on usage the digital tachographs, the European Union regulation introduces the European Registers of Road Transport Undertakings (ERRU), a system that allows a better exchange of information between Member States. The main purpose of this analysis is to present the measures for enforcement the execution of the provisions on obligation of installation and usage of digital tachographs in road transport and for improving the security of data recorded within digital tachograph system especially through exchange of the information on the most serious infringements committed by hauliers in any Member State, which may lead to the loss of good repute and the e-document engineering method used by the ERRU system.

Airborne Digital Sensor System and GPS-aided inertial technology for direct geopositioning in rough terrain

USGS Publications Warehouse

Sanchez, Richard D.

2004-01-01

High-resolution airborne digital cameras with onboard data collection based on the Global Positioning System (GPS) and inertial navigation systems (INS) technology may offer a real-time means to gather accurate topographic map information by reducing ground control and eliminating aerial triangulation. Past evaluations of this integrated system over relatively flat terrain have proven successful. The author uses Emerge Digital Sensor System (DSS) combined with Applanix Corporation?s Position and Orientation Solutions for Direct Georeferencing to examine the positional mapping accuracy in rough terrain. The positional accuracy documented in this study did not meet large-scale mapping requirements owing to an apparent system mechanical failure. Nonetheless, the findings yield important information on a new approach for mapping in Antarctica and other remote or inaccessible areas of the world.

Digitisation of Scenic and Historic Interest Areas in China

NASA Astrophysics Data System (ADS)

Yang, C.; Lawson, G.; Sim, J.

2015-08-01

Digital documents have become the major information source for heritage conservation practice. More heritage managers today use electronic maps and digital information systems to facilitate management and conservation of cultural heritage. However, the social aspects of digital heritage have not been sufficiently recognised. The aim of this paper is to examine China's `Digital Scenic Area' project, a national program started in 2004, to reveal the political and economic powers behind digital heritage practice. It was found that this project was only conducted within the most popular tourist destinations in China. Tourism information was the main object but information about landscape cultures were neglected in this project. This project also demonstrated that digital management was more like a political or economic symbol rather than a tool for heritage conservation. However, using digital technologies are still considered by the local government as a highly objective way of heritage management. Selected as a typical Scenic Area in China, Slender West Lake in Yangzhou was investigated to identify heritage stakeholder's attitudes toward digital management and the request from local management practice.

A scalable, self-analyzing digital locking system for use on quantum optics experiments.

PubMed

Sparkes, B M; Chrzanowski, H M; Parrain, D P; Buchler, B C; Lam, P K; Symul, T

2011-07-01

Digital control of optics experiments has many advantages over analog control systems, specifically in terms of the scalability, cost, flexibility, and the integration of system information into one location. We present a digital control system, freely available for download online, specifically designed for quantum optics experiments that allows for automatic and sequential re-locking of optical components. We show how the inbuilt locking analysis tools, including a white-noise network analyzer, can be used to help optimize individual locks, and verify the long term stability of the digital system. Finally, we present an example of the benefits of digital locking for quantum optics by applying the code to a specific experiment used to characterize optical Schrödinger cat states.

Tampa Bay Study Data and Information Management System (DIMS)

NASA Astrophysics Data System (ADS)

Edgar, N. T.; Johnston, J. B.; Yates, K.; Smith, K. E.

2005-05-01

Providing easy access to data and information is an essential component of both science and management. The Tampa Bay Data and Information Management System (DIMS) catalogs and publicizes data and products which are generated through the Tampa Bay Integrated Science Study. The publicly accessible interface consists of a Web site (http://gulfsci.usgs.gov), a digital library, and an interactive map server (IMS). The Tampa Bay Study Web site contains information from scientists involved in the study, and is also the portal site for the digital library and IMS. Study information is highlighted on the Web site according to the estuarine component: geology and geomorphology, water and sediment quality, ecosystem structure and function, and hydrodynamics. The Tampa Bay Digital Library is a web-based clearinghouse for digital products on Tampa Bay, including documents, maps, spatial and tabular data sets, presentations, etc. New developments to the digital library include new search features, 150 new products over the past year, and partnerships to expand the offering of science products. The IMS is a Web-based geographic information system (GIS) used to store, analyze and display data pertaining to Tampa Bay. Upgrades to the IMS have improved performance and speed, as well as increased the number of data sets available for mapping. The Tampa Bay DIMS is a dynamic entity and will continue to evolve with the study. Beginning in 2005, the Tampa Bay Integrated Coastal Model will have a more prominent presence within the DIMS. The Web site will feature model projects and plans; the digital library will host model products and data sets; the IMS will display spatial model data sets and analyses. These tools will be used to increase communication of USGS efforts in Tampa Bay to the public, local managers, and scientists.

Evaluation of Local Media Surveillance for Improved Disease Recognition and Monitoring in Global Hotspot Regions

PubMed Central

Schwind, Jessica S.; Wolking, David J.; Brownstein, John S.; Mazet, Jonna A. K.; Smith, Woutrina A.

2014-01-01

Digital disease detection tools are technologically sophisticated, but dependent on digital information, which for many areas suffering from high disease burdens is simply not an option. In areas where news is often reported in local media with no digital counterpart, integration of local news information with digital surveillance systems, such as HealthMap (Boston Children’s Hospital), is critical. Little research has been published in regards to the specific contribution of local health-related articles to digital surveillance systems. In response, the USAID PREDICT project implemented a local media surveillance (LMS) pilot study in partner countries to monitor disease events reported in print media. This research assessed the potential of LMS to enhance digital surveillance reach in five low- and middle-income countries. Over 16 weeks, select surveillance system attributes of LMS, such as simplicity, flexibility, acceptability, timeliness, and stability were evaluated to identify strengths and weaknesses in the surveillance method. Findings revealed that LMS filled gaps in digital surveillance network coverage by contributing valuable localized information on disease events to the global HealthMap database. A total of 87 health events were reported through the LMS pilot in the 16-week monitoring period, including 71 unique reports not found by the HealthMap digital detection tool. Furthermore, HealthMap identified an additional 236 health events outside of LMS. It was also observed that belief in the importance of the project and proper source selection from the participants was crucial to the success of this method. The timely identification of disease outbreaks near points of emergence and the recognition of risk factors associated with disease occurrence continue to be important components of any comprehensive surveillance system for monitoring disease activity across populations. The LMS method, with its minimal resource commitment, could be one tool used to address the information gaps seen in global ‘hot spot’ regions. PMID:25333618

Proposed U.S. Geological Survey standard for digital orthophotos

USGS Publications Warehouse

Hooper, David; Caruso, Vincent

1991-01-01

The U.S. Geological Survey has added the new category of digital orthophotos to the National Digital Cartographic Data Base. This differentially rectified digital image product enables users to take advantage of the properties of current photoimagery as a source of geographic information. The product and accompanying standard were implemented in spring 1991. The digital orthophotos will be quadrangle based and cast on the Universal Transverse Mercator projection and will extend beyond the 3.75-minute or 7.5-minute quadrangle area at least 300 meters to form a rectangle. The overedge may be used for mosaicking with adjacent digital orthophotos. To provide maximum information content and utility to the user, metadata (header) records exist at the beginning of the digital orthophoto file. Header information includes the photographic source type, date, instrumentation used to create the digital orthophoto, and information relating to the DEM that was used in the rectification process. Additional header information is included on transformation constants from the 1927 and 1983 North American Datums to the orthophoto internal file coordinates to enable the user to register overlays on either datum. The quadrangle corners in both datums are also imprinted on the image. Flexibility has been built into the digital orthophoto format for future enhancements, such as the provision to include the corresponding digital elevation model elevations used to rectify the orthophoto. The digital orthophoto conforms to National Map Accuracy Standards and provides valuable mapping data that can be used as a tool for timely revision of standard map products, for land use and land cover studies, and as a digital layer in a geographic information system.

Disrupting Threat Finances: Using Financial Information to Disrupt Terrorist Organizations

DTIC Science & Technology

2008-04-01

remittance systems, stored value cards, digital currency , and Islamic banking; b) not-for-profit organizations, including front organizations and...including cash couriers; alternative remittance systems “informal value transfer,” such as hawalas and hundis; stored value cards; digital currency ...work with other federal agencies to implement key statutory provisions of the Currency and Foreign Transactions Report- ing Act (commonly referred to

USGS Tampa Bay Pilot Study

USGS Publications Warehouse

Yates, K.K.; Cronin, T. M.; Crane, M.; Hansen, M.; Nayeghandi, A.; Swarzenski, P.; Edgar, T.; Brooks, G.R.; Suthard, B.; Hine, A.; Locker, S.; Willard, D.A.; Hastings, D.; Flower, B.; Hollander, D.; Larson, R.A.; Smith, K.

2007-01-01

Providing a web-based digital information management system of information for scientists and the public, including a system that supports the work of those officials who must make decisions that affect the state of the bay. The Tampa Bay Study is in its sixth year and will continue through September 2007. This paper presents a non-inclusive summary of key findings associated with the six primary project components listed above. Component 4 (above) is described in detail in the following chapter 13. More information on the Tampa Bay Study is available from our on-line digital information system for the Tampa Bay Study at http://gulfsci.usgs.gov.

Natural resources inventory system ASVT project

NASA Technical Reports Server (NTRS)

Joyce, A. T. (Principal Investigator)

1978-01-01

The author has identified the following significant results. One of the main advantages, both cost-wise and time-wise, of the natural resource inventory system involved the use of LANDSAT-acquired digital data for the land cover information component; thereby, eliminating the need to digitize such dynamic information from a map or aerial photo base. It was thought that the utility and the cost of information as derived from LANDSAT data for the various applications justified the operational use of data generated by LANDSAT.

Land use and land cover digital data

USGS Publications Warehouse

Fegeas, Robin G.; Claire, Robert W.; Guptill, Stephen C.; Anderson, K. Eric; Hallam, Cheryl A.

1983-01-01

The discipline of cartography is undergoing a number of profound changesthat center on the emerging influence ofdigital manipulation and analysis ofdata for the preparation of cartographic materials and for use in geographic information systems. Operational requirements have led to the development by the USGS National Mapping Division of several documents that establish in-house digital cartographic standards. In an effort to fulfill lead agency requirements for promulgation of Federal standards in the earth sciences, the documents have been edited and assembled with explanatory text into a USGS Circular. This Circular describes some of the pertinent issues relative to digital cartographic data standards, documents the digital cartographic data standards currently in use within the USGS, and details the efforts of the USGS related to the definition of national digital cartographic data standards. It consists of several chapters; the first is a general overview, and each succeeding chapter is made up from documents that establish in-house standards for one of the various types of digital cartographic data currently produced. This chapter 895-E, describes the Geographic Information Retrieval and Analysis System that is used in conjunction with the USGS land use and land cover classification system to encode, edit, manipuate, and analyze land use and land cover digital data.

A Statistical Testing Approach for Quantifying Software Reliability; Application to an Example System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chu, Tsong-Lun; Varuttamaseni, Athi; Baek, Joo-Seok

The U.S. Nuclear Regulatory Commission (NRC) encourages the use of probabilistic risk assessment (PRA) technology in all regulatory matters, to the extent supported by the state-of-the-art in PRA methods and data. Although much has been accomplished in the area of risk-informed regulation, risk assessment for digital systems has not been fully developed. The NRC established a plan for research on digital systems to identify and develop methods, analytical tools, and regulatory guidance for (1) including models of digital systems in the PRAs of nuclear power plants (NPPs), and (2) incorporating digital systems in the NRC's risk-informed licensing and oversight activities.more » Under NRC's sponsorship, Brookhaven National Laboratory (BNL) explored approaches for addressing the failures of digital instrumentation and control (I and C) systems in the current NPP PRA framework. Specific areas investigated included PRA modeling digital hardware, development of a philosophical basis for defining software failure, and identification of desirable attributes of quantitative software reliability methods. Based on the earlier research, statistical testing is considered a promising method for quantifying software reliability. This paper describes a statistical software testing approach for quantifying software reliability and applies it to the loop-operating control system (LOCS) of an experimental loop of the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL).« less

Use of personal digital assistants in diagnostic radiology resident education.

PubMed

Nishino, Mizuki; Busch, James M; Wei, Jesse; Barbaras, Larry; Yam, Chun-Shan; Hatabu, Hiroto

2004-10-01

Personal digital assistants (PDAs) are gaining widespread use in the medical community. We introduced a PDA-based mobile system that provides departmental and educational information with a seamless connection to the intranet. The objective of this study is to determine the impact a PDA has on educational resources (learning or data reference) brought to work and used at home by a radiology resident based on user surveys. Survey was performed on 32 radiology residents in our department before and 6 months after the release of the PDA-based system. We assessed the changes in (1) sources of learning at home and at work, and in (2) data reference. The second survey also evaluated the usefulness of each component of the system. After the release of the PDA-based mobile system, the use of "digital books and references" as data references and educational resources that were brought to work every day significantly increased (P = .016, P < .0001, respectively). "Traditional books and references" remained the "most useful source in learning radiology"; however, "digital books and references" increased as the residents' first choice from 0% to 16% within 6 months of introducing the package (P = .125). The introduction of a PDA-based system consisting of educational and departmental information had a statistically significant impact in increasing the use of digitized information in radiology resident education.

A Medical Image Backup Architecture Based on a NoSQL Database and Cloud Computing Services.

PubMed

Santos Simões de Almeida, Luan Henrique; Costa Oliveira, Marcelo

2015-01-01

The use of digital systems for storing medical images generates a huge volume of data. Digital images are commonly stored and managed on a Picture Archiving and Communication System (PACS), under the DICOM standard. However, PACS is limited because it is strongly dependent on the server's physical space. Alternatively, Cloud Computing arises as an extensive, low cost, and reconfigurable resource. However, medical images contain patient information that can not be made available in a public cloud. Therefore, a mechanism to anonymize these images is needed. This poster presents a solution for this issue by taking digital images from PACS, converting the information contained in each image file to a NoSQL database, and using cloud computing to store digital images.

76 FR 28499 - Data Fortress Systems Group Ltd., Digital Youth Network Corp., Fantom Technologies, Inc., and KIK...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-17

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Data Fortress Systems Group Ltd., Digital Youth Network Corp., Fantom Technologies, Inc., and KIK Technology International, Inc., Order of... of current and accurate information concerning the securities of Data Fortress Systems Group Ltd...

Image Acquisition and Quality in Digital Radiography.

PubMed

Alexander, Shannon

2016-09-01

Medical imaging has undergone dramatic changes and technological breakthroughs since the introduction of digital radiography. This article presents information on the development of digital radiography and types of digital radiography systems. Aspects of image quality and radiation exposure control are highlighted as well. In addition, the article includes related workplace changes and medicolegal considerations in the digital radiography environment. ©2016 American Society of Radiologic Technologists.

Evolving a NASA Digital Object Identifiers System with Community Engagement

NASA Technical Reports Server (NTRS)

Wanchoo, Lalit; James, Nathan

2016-01-01

To demonstrate how the ESDIS (Earth Science Data and Information System) DOI (Digital Object Identifier) system and its processes have evolved over these years based on the recommendations provided by the user community (whether the community members create and manage DOI information or use DOIs in the data citations). The user community is comprised of people with common interests and needs for data identifiers who are actively involved in the creation and usage process. Engagement describes the interactive context wherein the community provides information, evaluates the proposed processes, and provides guidance in the area of identifiers.

An experimental distribution of analog and digital information in a hybrid wireless visible light communication system based on acousto-optic modulation and sinusoidal gratings

NASA Astrophysics Data System (ADS)

Gómez Colín, R.; García Juárez, A.; Zaldívar Huerta, I. E.; Marquina, A. Vera; García Delgado, L. A.; Leal Cruz, A. L.; Gómez Fuentes, R.

2016-03-01

In this paper we propose a photonic architecture as an alternative tool to distribute point to multipoint analog and digital information over a hybrid wireless visible optical communication system. The experimental set-up is composed of a red laser pointer, an acousto-optic modulator, a sinusoidal grating and a photo-detector array. By using a simple and variable interferometric system, diffraction gratings with different spatial frequencies are generated and recorded on a photoemulsion which is composed of vanilla with dichromate gelatin. Analog video and digital information are first transmitted and recovered over a wireless communication system using a microwave carrier at 4.52 GHz which is generated by distributed feedback lasers operating in the low laser threshold current region. Separately, the recovered video information and digital data are combined with a radio frequency signal of 80 MHz, obtaining a subcarrier of information that is imposed on the optical carrier of the pointer laser using an acousto-optic modulator which is operated with an angle of incident light that satisfies the Bragg condition. The modulated optical carrier is sent to a sinusoidal grating, the diffraction pattern is photo-detected using an array of PIN photo-detectors. The use of sinusoidal gratings with acousto-optic modulators allows that number of channels to be increased when both components are placed in cascade.

Digital imaging in dentistry.

PubMed

Essen, S Donovan

2011-01-01

Information technology is vital to operations, marketing, accounting, finance and administration. One of the most exciting and quickly evolving technologies in the modern dental office is digital applications. The dentist is often the business manager, information technology officer and strategic planning chief for his small business. The information systems triangle applies directly to this critical manager supported by properly trained ancillary staff and good equipment. With emerging technology driving all medical disciplines and the rapid pace at which it emerges, it is vital for the contemporary practitioner to keep abreast of the newest information technology developments. This article compares the strategic and operational advantages of digital applications, specifically imaging. The focus of this paper will be on digital radiography (DR), 3D computerized tomography, digital photography and digitally-driven CAD/CAM to what are now considered obsolescing modalities and contemplates what may arrive in the future. It is the purpose of this essay to succinctly evaluate the decisions involved in the role, application and implications of employing this tool in the dental environment

Develop security architecture for both in-house healthcare information systems and electronic patient record

NASA Astrophysics Data System (ADS)

Zhang, Jianguo; Chen, Xiaomeng; Zhuang, Jun; Jiang, Jianrong; Zhang, Xiaoyan; Wu, Dongqing; Huang, H. K.

2003-05-01

In this paper, we presented a new security approach to provide security measures and features in both healthcare information systems (PACS, RIS/HIS), and electronic patient record (EPR). We introduced two security components, certificate authoring (CA) system and patient record digital signature management (DSPR) system, as well as electronic envelope technology, into the current hospital healthcare information infrastructure to provide security measures and functions such as confidential or privacy, authenticity, integrity, reliability, non-repudiation, and authentication for in-house healthcare information systems daily operating, and EPR exchanging among the hospitals or healthcare administration levels, and the DSPR component manages the all the digital signatures of patient medical records signed through using an-symmetry key encryption technologies. The electronic envelopes used for EPR exchanging are created based on the information of signers, digital signatures, and identifications of patient records stored in CAS and DSMS, as well as the destinations and the remote users. The CAS and DSMS were developed and integrated into a RIS-integrated PACS, and the integration of these new security components is seamless and painless. The electronic envelopes designed for EPR were used successfully in multimedia data transmission.

The System for Quick Search of the Astronomical Objects and Events in the Digital Plate Archives.

NASA Astrophysics Data System (ADS)

Sergeev, A. V.; Sergeeva, T. P.

From the middle of the XIX century observatories all over the world have accumulated about three millions astronomical plates contained the unique information about the Universe which can not be obtained or restored with the help of any newest facilities and technologies but may be useful for many modern astronomical investigations. The threat of astronomical plate archives loss caused by economical, technical or some other causes have put before world astronomical community a problem: the preservation of the unique information kept on those plates. The problem can be solved by transformation of the information from plates to digital form and keeping it on electronic data medium. We began a creation of a system for quick search and analysing of astronomical events and objects in digital plate archive of the Ukrainian Main astronomical observatory of NAS. Connection of the system to Internet will allow a remote user (astronomer or observer) to have access to digital plate archive and to work with it. For providing of the high efficiency of this work the plate database (list of the plates with all information about them and access software) are preparing. Modular structure of the system basic software and standard format of the plate image files allow future development of problem-oriented software for special astronomical researches.

Multimodal biometric digital watermarking on immigrant visas for homeland security

NASA Astrophysics Data System (ADS)

Sasi, Sreela; Tamhane, Kirti C.; Rajappa, Mahesh B.

2004-08-01

Passengers with immigrant Visa's are a major concern to the International Airports due to the various fraud operations identified. To curb tampering of genuine Visa, the Visa's should contain human identification information. Biometric characteristic is a common and reliable way to authenticate the identity of an individual [1]. A Multimodal Biometric Human Identification System (MBHIS) that integrates iris code, DNA fingerprint, and the passport number on the Visa photograph using digital watermarking scheme is presented. Digital Watermarking technique is well suited for any system requiring high security [2]. Ophthalmologists [3], [4], [5] suggested that iris scan is an accurate and nonintrusive optical fingerprint. DNA sequence can be used as a genetic barcode [6], [7]. While issuing Visa at the US consulates, the DNA sequence isolated from saliva, the iris code and passport number shall be digitally watermarked in the Visa photograph. This information is also recorded in the 'immigrant database'. A 'forward watermarking phase' combines a 2-D DWT transformed digital photograph with the personal identification information. A 'detection phase' extracts the watermarked information from this VISA photograph at the port of entry, from which iris code can be used for identification and DNA biometric for authentication, if an anomaly arises.

A 'user friendly' geographic information system in a color interactive digital image processing system environment

NASA Technical Reports Server (NTRS)

Campbell, W. J.; Goldberg, M.

1982-01-01

NASA's Eastern Regional Remote Sensing Applications Center (ERRSAC) has recognized the need to accommodate spatial analysis techniques in its remote sensing technology transfer program. A computerized Geographic Information System to incorporate remotely sensed data, specifically Landsat, with other relevant data was considered a realistic approach to address a given resource problem. Questions arose concerning the selection of a suitable available software system to demonstrate, train, and undertake demonstration projects with ERRSAC's user community. The very specific requirements for such a system are discussed. The solution found involved the addition of geographic information processing functions to the Interactive Digital Image Manipulation System (IDIMS). Details regarding the functions of the new integrated system are examined along with the characteristics of the software.

49 CFR 38.35 - Public information system.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Public information system. 38.35 Section 38.35... SPECIFICATIONS FOR TRANSPORTATION VEHICLES Buses, Vans and Systems § 38.35 Public information system. (a... a public address system permitting the driver, or recorded or digitized human speech messages, to...

[Digitalization of radiological imaging information and consequences for patient care in the hospital ].

PubMed

den Heeten, G J; Barneveld Binkhuysen, F H

2001-08-25

Determining the rate at which radiology must be digitalised has been a controversial issue for many years. Much radiological information is still obtained from the film-screen combination (X-rays) with all of its known inherent restrictions. The importance of imaging information in the healthcare process continues to increase for both radiologists and referring physicians, and the ongoing developments in information technology means that it is possible to integrate imaging information and electronic patient files. The healthcare process can only become more effective and efficient when the appropriate information is in the right place at the right time, something that conventional methods, using photos that need to be physically moved, can scarcely satisfy. There is also a desire for integration with information obtained from nuclear medicine, pathology and endoscopy, and eventually of all stand-alone data systems with relevance for the individually oriented hospital healthcare. The transition from a conventional to a digital process is complex; it is accompanied by the transition from a data-oriented to a process-oriented system. Many years have already been invested in the integration of information systems and the development of digital systems within radiology, the current performance of which is such that many hospitals are considering the digitalisation process or are already implementing parts of it.

Conversion of environmental data to a digital-spatial database, Puget Sound area, Washington

USGS Publications Warehouse

Uhrich, M.A.; McGrath, T.S.

1997-01-01

Data and maps from the Puget Sound Environmental Atlas, compiled for the U.S. Environmental Protection Agency, the Puget Sound Water Quality Authority, and the U.S. Army Corps of Engineers, have been converted into a digital-spatial database using a geographic information system. Environmental data for the Puget Sound area,collected from sources other than the Puget SoundEnvironmental Atlas by different Federal, State, andlocal agencies, also have been converted into thisdigital-spatial database. Background on the geographic-information-system planning process, the design and implementation of the geographic information-system database, and the reasons for conversion to this digital-spatial database are included in this report. The Puget Sound Environmental Atlas data layers include information about seabird nesting areas, eelgrass and kelp habitat, marine mammal and fish areas, and shellfish resources and bed certification. Data layers, from sources other than the Puget Sound Environmental Atlas, include the Puget Sound shoreline, the water-body system, shellfish growing areas, recreational shellfish beaches, sewage-treatment outfalls, upland hydrography,watershed and political boundaries, and geographicnames. The sources of data, descriptions of the datalayers, and the steps and errors of processing associated with conversion to a digital-spatial database used in development of the Puget Sound Geographic Information System also are included in this report. The appendixes contain data dictionaries for each of the resource layers and error values for the conversion of Puget SoundEnvironmental Atlas data.

Optical Security System Based on the Biometrics Using Holographic Storage Technique with a Simple Data Format

NASA Astrophysics Data System (ADS)

Jun, An Won

2006-01-01

We implement a first practical holographic security system using electrical biometrics that combines optical encryption and digital holographic memory technologies. Optical information for identification includes a picture of face, a name, and a fingerprint, which has been spatially multiplexed by random phase mask used for a decryption key. For decryption in our biometric security system, a bit-error-detection method that compares the digital bit of live fingerprint with of fingerprint information extracted from hologram is used.

Charting the Course: Life Cycle Management of Mars Mission Digital Information

NASA Technical Reports Server (NTRS)

Reiz, Julie M.

2003-01-01

This viewgraph presentation reviews the life cycle management of MER Project information. This process was an essential key to the successful launch of the MER Project rovers. Incorporating digital information archive requirements early in the project life cycle resulted in: Design of an information system that included archive metadata, Reduced the risk of information loss through in-process appraisal, Easier transfer of project information to institutional online archive and Project appreciation for preserving information for reuse by future projects

Digital Image Processing in Private Industry.

ERIC Educational Resources Information Center

Moore, Connie

1986-01-01

Examines various types of private industry optical disk installations in terms of business requirements for digital image systems in five areas: records management; transaction processing; engineering/manufacturing; information distribution; and office automation. Approaches for implementing image systems are addressed as well as key success…

Classified one-step high-radix signed-digit arithmetic units

NASA Astrophysics Data System (ADS)

Cherri, Abdallah K.

1998-08-01

High-radix number systems enable higher information storage density, less complexity, fewer system components, and fewer cascaded gates and operations. A simple one-step fully parallel high-radix signed-digit arithmetic is proposed for parallel optical computing based on new joint spatial encodings. This reduces hardware requirements and improves throughput by reducing the space-bandwidth produce needed. The high-radix signed-digit arithmetic operations are based on classifying the neighboring input digit pairs into various groups to reduce the computation rules. A new joint spatial encoding technique is developed to present both the operands and the computation rules. This technique increases the spatial bandwidth product of the spatial light modulators of the system. An optical implementation of the proposed high-radix signed-digit arithmetic operations is also presented. It is shown that our one-step trinary signed-digit and quaternary signed-digit arithmetic units are much simpler and better than all previously reported high-radix signed-digit techniques.

Planning by Using Digital Technology in the Reconstruction of Cultural Heritage Sites - a Case Study of Qiong-Lin Settlement in Kinmen Area

NASA Astrophysics Data System (ADS)

Yang, W. B.; Ye, Y. N.

2017-08-01

ICOMOS Florence Declaration in 2014, encourages an in-depth reflection on human values through cultural heritage and landscapes, which emphasizes the importance of historical heritage sites, in order to achieve the application of cultural heritage records through the public participation, sharing new technology platform and facilitation tools for knowledge diffusion, for instance. Nikos adopted digitized intangible cultural heritage within i-Treasures project to create a novel digital platform in 2016. Nowadays, the display platform developed based on geographic information system has been gradually accepted and widely used to distribute cultural heritage information, aiming to combine geography, time, events, issues, trends with the interactive maps to show the context of data changes from the consideration of planarity; for example, Burnaby City in Canada has cooperated with the Columbia University to create a navigation platform for guidance of tangible cultural heritage based on story maps in order to provide public recognition function. In this study, Qiong-Lin Settlement in Kinmen Area was taken as an example to illustrate the developing process of an overall planning framework for reappearing the glory of historic settlements of cultural heritage sites with digital technology, which included tangible and intangible cultural heritage preservation and transmission planning, community participation and digital navigation programs. The digital technology with the GIS-based digital platform can provide more diverse and interesting information while using an intuitive, graphical user story mapping interface. So that tangible cultural heritage can be effectively understood, interpreted and preserved with the value-added methods, and also intangible cultural heritage can be continuously transmitted to establish a complete system of cultural heritage preservation. The main contents include several navigation technologies, such as 3D laser scanning, UAV images, photogrammetry, panorama, audio/video, geographic information systems etc.

Scientific Inquiry, Digital Literacy, and Mobile Computing in Informal Learning Environments

ERIC Educational Resources Information Center

Marty, Paul F.; Alemanne, Nicole D.; Mendenhall, Anne; Maurya, Manisha; Southerland, Sherry A.; Sampson, Victor; Douglas, Ian; Kazmer, Michelle M.; Clark, Amanda; Schellinger, Jennifer

2013-01-01

Understanding the connections between scientific inquiry and digital literacy in informal learning environments is essential to furthering students' critical thinking and technology skills. The Habitat Tracker project combines a standards-based curriculum focused on the nature of science with an integrated system of online and mobile computing…

2000 Digital Avionics Highlights

NASA Technical Reports Server (NTRS)

Polites, Michael E.

2000-01-01

This article summarizes the highlights of recent events and developments in digital avionics in commercial aviation, military systems, and space. This article is about 1,200 words long. Information for the article was collected from other NASA centers, DoD, and industry. All information was previously cleared by the originating organizations. Information for the article was also gathered from Aviation Week and Space Technology and similar sources.

Why the Central Dogma: on the nature of the great biological exclusion principle.

PubMed

Koonin, Eugene V

2015-09-16

The Central Dogma of molecular biology posits that transfer of information from proteins back to nucleic acids does not occur in biological systems. I argue that the impossibility of reverse translation is indeed a major, physical exclusion principle that emerges due to the transition from the digital information carriers, nucleic acids, to analog information carriers, proteins, which involves irreversible suppression of the digital information.

The role of digital cartographic data in the geosciences

USGS Publications Warehouse

Guptill, S.C.

1983-01-01

The increasing demand of the Nation's natural resource developers for the manipulation, analysis, and display of large quantities of earth-science data has necessitated the use of computers and the building of geoscience information systems. These systems require, in digital form, the spatial data on map products. The basic cartographic data shown on quadrangle maps provide a foundation for the addition of geological and geophysical data. If geoscience information systems are to realize their full potential, large amounts of digital cartographic base data must be available. A major goal of the U.S. Geological Survey is to create, maintain, manage, and distribute a national cartographic and geographic digital database. This unified database will contain numerous categories (hydrography, hypsography, land use, etc.) that, through the use of standardized data-element definitions and formats, can be used easily and flexibly to prepare cartographic products and perform geoscience analysis. ?? 1983.

Using digital watermarking to enhance security in wireless medical image transmission.

PubMed

Giakoumaki, Aggeliki; Perakis, Konstantinos; Banitsas, Konstantinos; Giokas, Konstantinos; Tachakra, Sapal; Koutsouris, Dimitris

2010-04-01

During the last few years, wireless networks have been increasingly used both inside hospitals and in patients' homes to transmit medical information. In general, wireless networks suffer from decreased security. However, digital watermarking can be used to secure medical information. In this study, we focused on combining wireless transmission and digital watermarking technologies to better secure the transmission of medical images within and outside the hospital. We utilized an integrated system comprising the wireless network and the digital watermarking module to conduct a series of tests. The test results were evaluated by medical consultants. They concluded that the images suffered no visible quality degradation and maintained their diagnostic integrity. The proposed integrated system presented reasonable stability, and its performance was comparable to that of a fixed network. This system can enhance security during the transmission of medical images through a wireless channel.

Method and apparatus for analog signal conditioner for high speed, digital x-ray spectrometer

DOEpatents

Warburton, William K.; Hubbard, Bradley

1999-01-01

A signal processing system which accepts input from an x-ray detector-preamplifier and produces a signal of reduced dynamic range for subsequent analog-to-digital conversion. The system conditions the input signal to reduce the number of bits required in the analog-to-digital converter by removing that part of the input signal which varies only slowly in time and retaining the amplitude of the pulses which carry information about the x-rays absorbed by the detector. The parameters controlling the signal conditioner's operation can be readily supplied in digital form, allowing it to be integrated into a feedback loop as part of a larger digital x-ray spectroscopy system.

The radiology digital dashboard: effects on report turnaround time.

PubMed

Morgan, Matthew B; Branstetter, Barton F; Lionetti, David M; Richardson, Jeremy S; Chang, Paul J

2008-03-01

As radiology departments transition to near-complete digital information management, work flows and their supporting informatics infrastructure are becoming increasingly complex. Digital dashboards can integrate separate computerized information systems and summarize key work flow metrics in real time to facilitate informed decision making. A PACS-integrated digital dashboard function designed to alert radiologists to their unsigned report queue status, coupled with an actionable link to the report signing application, resulted in a 24% reduction in the time between transcription and report finalization. The dashboard was well received by radiologists who reported high usage for signing reports. Further research is needed to identify and evaluate other potentially useful work flow metrics for inclusion in a radiology clinical dashboard.

Evacuation support system for improved medical documentation and information flow in the field.

PubMed

Walderhaug, Ståle; Meland, Per Håkon; Mikalsen, Marius; Sagen, Terje; Brevik, John Ivar

2008-02-01

Documentation of medical treatment and observation of patients during evacuation from the point of injury to definitive treatment is important both for optimizing patient treatment and managing the evacuation process. The current practice in military medical field documentation uses paper forms and voice communication. There are many shortcomings associated with this approach, especially with respect to information capture and sharing processes. Current research addresses the use of new technology for civilian ambulance-to-hospital communication. The research work presented in this article addresses information capture and sharing in extreme military conditions by evaluating a targeted computerized information system called EvacSys during a military exercise in northern Norway in December 2003. EvacSys was designed and implemented in close cooperation with military medical personnel in both Norway and the USA. The system was evaluated and compared to the traditional paper-based documentation method during a military exercise. The on-site evaluation was conducted in a military medical platoon in the Norwegian Armed Forces, using questionnaires, semi-structured interviews, observation and video recording to capture the users' system acceptance. A prototype software system running on a commercial off-the-shelf hardware platform was successfully developed. The evaluation of this system shows that the usability of digital information capturing and sharing are perceived to be at least as good as the traditional paper-based method. The medics found the new digital method to be more viable than the old one. No technical problems were encountered. Our research shows that it is feasible to utilize digital information systems for medical documentation in extreme outdoor environments. The usability concern is of utmost importance, and more research should be put into the design and alignment with existing workflow. Successful digitalization of information at the point of care will provide accurate and timely information for the management of resources during disaster response.

The development of a full-digital and networkable multi-media based highway information system : phase 1

DOT National Transportation Integrated Search

1999-07-26

This report covers the development of a Multimedia Based Highway Information System (MMHIS). MMHIS extends the capabilities of current photo logging facilities. Photographic logging systems used by highway agencies provide engineers with information ...

Spatial digital database of the geologic map of Catalina Core Complex and San Pedro Trough, Pima, Pinal, Gila, Graham, and Cochise counties, Arizona

USGS Publications Warehouse

Dickinson, William R.; digital database by Hirschberg, Douglas M.; Pitts, G. Stephen; Bolm, Karen S.

2002-01-01

The geologic map of Catalina Core Complex and San Pedro Trough by Dickinson (1992) was digitized for input into a geographic information system (GIS) by the U.S. Geological Survey staff and contractors in 2000-2001. This digital geospatial database is one of many being created by the U.S. Geological Survey as an ongoing effort to provide geologic information in a geographic information system (GIS) for use in spatial analysis. The resulting digital geologic map database data can be queried in many ways to produce a variety of geologic maps and derivative products. Digital base map data (topography, roads, towns, rivers, lakes, and so forth) are not included; they may be obtained from a variety of commercial and government sources. This database is not meant to be used or displayed at any scale larger than 1:125,000 (for example, 1:100,000 or 1:24,000). The digital geologic map plot files that are provided herein are representations of the database. The map area is located in southern Arizona. This report lists the geologic map units, the methods used to convert the geologic map data into a digital format, the ArcInfo GIS file structures and relationships, and explains how to download the digital files from the U.S. Geological Survey public access World Wide Web site on the Internet. The manuscript and digital data review by Lorre Moyer (USGS) is greatly appreciated.

Analog to digital workflow improvement: a quantitative study.

PubMed

Wideman, Catherine; Gallet, Jacqueline

2006-01-01

This study tracked a radiology department's conversion from utilization of a Kodak Amber analog system to a Kodak DirectView DR 5100 digital system. Through the use of ProModel Optimization Suite, a workflow simulation software package, significant quantitative information was derived from workflow process data measured before and after the change to a digital system. Once the digital room was fully operational and the radiology staff comfortable with the new system, average patient examination time was reduced from 9.24 to 5.28 min, indicating that a higher patient throughput could be achieved. Compared to the analog system, chest examination time for modality specific activities was reduced by 43%. The percentage of repeat examinations experienced with the digital system also decreased to 8% vs. the level of 9.5% experienced with the analog system. The study indicated that it is possible to quantitatively study clinical workflow and productivity by using commercially available software.

What Is A Picture Archiving And Communication System (PACS)?

NASA Astrophysics Data System (ADS)

Marceau, Carla

1982-01-01

A PACS is a digital system for acquiring, storing, moving and displaying picture or image information. It is an alternative to film jackets that has been made possible by recent breakthroughs in computer technology: telecommunications, local area nets and optical disks. The fundamental concept of the digital representation of image information is introduced. It is shown that freeing images from a material representation on film or paper leads to a dramatic increase in flexibility in our use of the images. The ultimate goal of a medical PACS system is a radiology department without film jackets. The inherent nature of digital images and the power of the computer allow instant free "copies" of images to be made and thrown away. These copies can be transmitted to distant sites in seconds, without the "original" ever leaving the archives of the radiology department. The result is a radiology department with much freer access to patient images and greater protection against lost or misplaced image information. Finally, images in digital form can be treated as data for the computer in image processing, which includes enhancement, reconstruction and even computer-aided analysis.

Storing Data and Video on One Tape

NASA Technical Reports Server (NTRS)

Nixon, J. H.; Cater, J. P.

1985-01-01

Microprocessor-based system originally developed for anthropometric research merges digital data with video images for storage on video cassette recorder. Combined signals later retrieved and displayed simultaneously on television monitor. System also extracts digital portion of stored information and transfers it to solid-state memory.

Student Development of Educational Software: Spin-Offs from Classroom Use of DIAS.

ERIC Educational Resources Information Center

Harrington, John A., Jr.; And Others

1988-01-01

Describes several college courses which encourage students to develop computer software programs in the areas of remote sensing and geographic information systems. A microcomputer-based tutorial package, the Digital Image Analysis System (DAIS), teaches the principles of digital processing. (LS)

Design of digital voice storage and playback system

NASA Astrophysics Data System (ADS)

Tang, Chao

2018-03-01

Based on STC89C52 chip, this paper presents a single chip microcomputer minimum system, which is used to realize the logic control of digital speech storage and playback system. Compared with the traditional tape voice recording system, the system has advantages of small size, low power consumption, The effective solution of traditional voice recording system is limited in the use of electronic and information processing.

Time and frequency for digital telecommunications

NASA Technical Reports Server (NTRS)

Folts, H. C.

1972-01-01

Time and frequency (T and F) are fundamental and pervasive parameters of telecommunication technology. Advancing development of digital communications using data modulation rates above 2400 baud and time-division multiplex in complex network configurations is now requiring more accurate and precise T and F reference information for efficient operation of telecommunication systems. A schematic diagram of a general communication system is shown. This diagram is very general and can depict any type of communication. The information source selects a specific message which is encoded and sent through a communication channel. Enroute, the signal is subjected to perturbations from environmental noise. The received signal is then decoded and delivered to its destination. Through the process, the message may undergo many spurious changes, resulting in a loss of information content in the delivered message as compared to the original selected message. In digital telecommunication systems, loss of information content of the signals can be attributed to noise, distortion of waveshape, and loss of synchronization.

Information needs research in the era of the digital medical library.

PubMed Central

Lomax, E. C.; Lowe, H. J.

1998-01-01

The rapid adoption of Internet-accessible information resources by the clinical community, has resulted in an exponential growth in the variety and type of clinical information resources along with an increasing diversity of information technologies to deliver clinical information. To date, little formal work has been done to investigate the significance of new information technologies such as Internet-based digital libraries and multimedia record systems on clinical information need or information seeking behavior. In the work described in this paper, we highlight some results from our recent multimethod research design and investigation of the information-seeking behavior of Pittsburgh area medical oncologists to argue for the use of a multimethod research design as an essential component of any investigation of clinical information need and information-seeking behavior in the era of the digital medical library. PMID:9929301

Improving the delivery of care and reducing healthcare costs with the digitization of information.

PubMed

Noffsinger, R; Chin, S

2000-01-01

In the coming years, the digitization of information and the Internet will be extremely powerful in reducing healthcare costs while assisting providers in the delivery of care. One example of healthcare inefficiency that can be managed through information digitization is the process of prescription writing. Due to the handwritten and verbal communication surrounding prescription writing, as well as the multiple tiers of authorizations, the prescription drug process causes extensive financial waste as well as medical errors, lost time, and even fatal accidents. Electronic prescription management systems are being designed to address these inefficiencies. By utilizing new electronic prescription systems, physicians not only prescribe more accurately, but also improve formulary compliance thereby reducing pharmacy utilization. These systems expand patient care by presenting proactive alternatives at the point of prescription while reducing costs and providing additional benefits for consumers and healthcare providers.

Mineral resources management based on GIS and RS: a case study of the Laozhaiwan Gold Mine

NASA Astrophysics Data System (ADS)

Wu, Hao; Hua, Xianghong; Wang, Xinzhou; Ma, Liguang; Yuan, Yanbin

2005-10-01

With the development of digital information technology in mining industry, the concept of DM (Digital Mining) and MGIS (Mining Geographical Information System) are becoming the research focus but not perfect. How to effectively manage the dataset of geological, surveying and mineral products grade is the key point that concerned the sustainable development and standardized management in mining industry. Based on the existing combined GIS and remote sensing technology, we propose a model named DMMIS (Digital Mining Management Information System), which is composed of the database layer, the ActiveX layer and the user interface layer. The system is used in Laozhaiwan Gold Mine, Yunnan Province of China, which is shown to demonstrate the feasibility of the research and development achievement stated in this paper. Finally, some conclusions and constructive advices for future research work are given.

The architecture of enterprise hospital information system.

PubMed

Lu, Xudong; Duan, Huilong; Li, Haomin; Zhao, Chenhui; An, Jiye

2005-01-01

Because of the complexity of the hospital environment, there exist a lot of medical information systems from different vendors with incompatible structures. In order to establish an enterprise hospital information system, the integration among these heterogeneous systems must be considered. Complete integration should cover three aspects: data integration, function integration and workflow integration. However most of the previous design of architecture did not accomplish such a complete integration. This article offers an architecture design of the enterprise hospital information system based on the concept of digital neural network system in hospital. It covers all three aspects of integration, and eventually achieves the target of one virtual data center with Enterprise Viewer for users of different roles. The initial implementation of the architecture in the 5-year Digital Hospital Project in Huzhou Central hospital of Zhejiang Province is also described.

Digital Radiography

NASA Technical Reports Server (NTRS)

1986-01-01

System One, a digital radiography system, incorporates a reusable image medium (RIM) which retains an image. No film is needed; the RIM is read with a laser scanner, and the information is used to produce a digital image on an image processor. The image is stored on an optical disc. System allows the radiologist to "dial away" unwanted images to compare views on three screens. It is compatible with existing equipment and cost efficient. It was commercialized by a Stanford researcher from energy selective technology developed under a NASA grant.

Applying the Technology Acceptance Model in a Study of the Factors Affecting Usage of the Taiwan Digital Archives System

ERIC Educational Resources Information Center

Hong, Jon-Chao; Hwang, Ming-Yueh; Hsu, Hsuan-Fang; Wong, Wan-Tzu; Chen, Mei-Yung

2011-01-01

The rapid development of information and communication technology and the popularization of the Internet have given a boost to digitization technologies. Since 2001, The National Science Council (NSC) of Taiwan has invested a large amount of funding in the National Digital Archives Program (NDAP) to develop digital content. Some studies have…

Scientific Digital Libraries, Interoperability, and Ontologies

NASA Technical Reports Server (NTRS)

Hughes, J. Steven; Crichton, Daniel J.; Mattmann, Chris A.

2009-01-01

Scientific digital libraries serve complex and evolving research communities. Justifications for the development of scientific digital libraries include the desire to preserve science data and the promises of information interconnectedness, correlative science, and system interoperability. Shared ontologies are fundamental to fulfilling these promises. We present a tool framework, some informal principles, and several case studies where shared ontologies are used to guide the implementation of scientific digital libraries. The tool framework, based on an ontology modeling tool, was configured to develop, manage, and keep shared ontologies relevant within changing domains and to promote the interoperability, interconnectedness, and correlation desired by scientists.

The research of laser marking control technology

NASA Astrophysics Data System (ADS)

Zhang, Qiue; Zhang, Rong

2009-08-01

In the area of Laser marking, the general control method is insert control card to computer's mother board, it can not support hot swap, it is difficult to assemble or it. Moreover, the one marking system must to equip one computer. In the system marking, the computer can not to do the other things except to transmit marking digital information. Otherwise it can affect marking precision. Based on traditional control methods existed some problems, introduced marking graphic editing and digital processing by the computer finish, high-speed digital signal processor (DSP) control marking the whole process. The laser marking controller is mainly contain DSP2812, digital memorizer, DAC (digital analog converting) transform unit circuit, USB interface control circuit, man-machine interface circuit, and other logic control circuit. Download the marking information which is processed by computer to U disk, DSP read the information by USB interface on time, then processing it, adopt the DSP inter timer control the marking time sequence, output the scanner control signal by D/A parts. Apply the technology can realize marking offline, thereby reduce the product cost, increase the product efficiency. The system have good effect in actual unit markings, the marking speed is more quickly than PCI control card to 20 percent. It has application value in practicality.

Design and application of BIM based digital sand table for construction management

NASA Astrophysics Data System (ADS)

Fuquan, JI; Jianqiang, LI; Weijia, LIU

2018-05-01

This paper explores the design and application of BIM based digital sand table for construction management. Aiming at the demands and features of construction management plan for bridge and tunnel engineering, the key functional features of digital sand table should include three-dimensional GIS, model navigation, virtual simulation, information layers, and data exchange, etc. That involving the technology of 3D visualization and 4D virtual simulation of BIM, breakdown structure of BIM model and project data, multi-dimensional information layers, and multi-source data acquisition and interaction. Totally, the digital sand table is a visual and virtual engineering information integrated terminal, under the unified data standard system. Also, the applications shall contain visual constructing scheme, virtual constructing schedule, and monitoring of construction, etc. Finally, the applicability of several basic software to the digital sand table is analyzed.

The National Institutes of Health Clinical Center Digital Imaging Network, Picture Archival and Communication System, and Radiology Information System.

PubMed

Goldszal, A F; Brown, G K; McDonald, H J; Vucich, J J; Staab, E V

2001-06-01

In this work, we describe the digital imaging network (DIN), picture archival and communication system (PACS), and radiology information system (RIS) currently being implemented at the Clinical Center, National Institutes of Health (NIH). These systems are presently in clinical operation. The DIN is a redundant meshed network designed to address gigabit density and expected high bandwidth requirements for image transfer and server aggregation. The PACS projected workload is 5.0 TB of new imaging data per year. Its architecture consists of a central, high-throughput Digital Imaging and Communications in Medicine (DICOM) data repository and distributed redundant array of inexpensive disks (RAID) servers employing fiber-channel technology for immediate delivery of imaging data. On demand distribution of images and reports to clinicians and researchers is accomplished via a clustered web server. The RIS follows a client-server model and provides tools to order exams, schedule resources, retrieve and review results, and generate management reports. The RIS-hospital information system (HIS) interfaces include admissions, discharges, and transfers (ATDs)/demographics, orders, appointment notifications, doctors update, and results.

Video signal processing system uses gated current mode switches to perform high speed multiplication and digital-to-analog conversion

NASA Technical Reports Server (NTRS)

Gilliland, M. G.; Rougelot, R. S.; Schumaker, R. A.

1966-01-01

Video signal processor uses special-purpose integrated circuits with nonsaturating current mode switching to accept texture and color information from a digital computer in a visual spaceflight simulator and to combine these, for display on color CRT with analog information concerning fading.

The Internet, Political Communications Research and the Search for a New Information Paradigm

ERIC Educational Resources Information Center

Chiu, William Franklin

2013-01-01

The Internet, as a digital record of human discourse, provides an opportunity to directly analyze political communicative behavior. The rapid emergence of social online networks augurs a transformation in the quality and quantity of information people have to evaluate their political system. Digital formats instantiate new categories of actors and…

Compton suppression and event triggering in a commercial data acquisition system

NASA Astrophysics Data System (ADS)

Tabor, Samuel; Caussyn, D. D.; Tripathi, Vandana; Vonmoss, J.; Liddick, S. N.

2012-10-01

A number of groups are starting to use flash digitizer systems to directly convert the preamplifier signals of high-resolution Ge detectors to a stream of digital data. Some digitizers are also equipped with software constant fraction discriminator algorithms capable of operating on the resulting digital data stream to provide timing information. Because of the dropping cost per channel of these systems, it should now be possible to also connect outputs of the Bismuth Germanate (BGO) scintillators used for Compton suppression to other digitizer inputs so that BGO logic signals can also be available in the same system. This provides the possibility to perform all the Compton suppression and multiplicity trigger logic within the digital system, thus eliminating the need for separate timing filter amplifiers (TFA), constant fraction discriminators (CFD), logic units, and lots of cables. This talk will describe the performance of such a system based on Pixie16 modules from XIA LLC with custom field programmable gate array (FPGA) programming for an array of Compton suppressed single Ge crystal and 4-crystal ``Clover'' detector array along with optional particle detectors. Initial tests of the system have produced results comparable with the current traditional system of individual electronics and peak sensing analog to digital converters. The advantages of the all digital system will be discussed.

An automatic optimum kernel-size selection technique for edge enhancement

USGS Publications Warehouse

Chavez, Pat S.; Bauer, Brian P.

1982-01-01

Edge enhancement is a technique that can be considered, to a first order, a correction for the modulation transfer function of an imaging system. Digital imaging systems sample a continuous function at discrete intervals so that high-frequency information cannot be recorded at the same precision as lower frequency data. Because of this, fine detail or edge information in digital images is lost. Spatial filtering techniques can be used to enhance the fine detail information that does exist in the digital image, but the filter size is dependent on the type of area being processed. A technique has been developed by the authors that uses the horizontal first difference to automatically select the optimum kernel-size that should be used to enhance the edges that are contained in the image. 

Developing Data Citations from Digital Object Identifier Metadata

NASA Technical Reports Server (NTRS)

James, Nathan; Wanchoo, Lalit

2015-01-01

NASA's Earth Science Data and Information System (ESDIS) Project has been processing information for the registration of Digital Object Identifiers (DOI) for the last five years of which an automated system has been in operation for the last two years. The ESDIS DOI registration system has registered over 2000 DOIs with over 1000 DOIs held in reserve until all required information has been collected. By working towards the goal of assigning DOIs to the 8000+ data collections under its management, ESDIS has taken the first step towards facilitating the use of data citations with those products. Jeanne Behnke, ESDIS Deputy Project Manager has reviewed and approved the poster.

Watershed Boundary Dataset for Mississippi

USGS Publications Warehouse

Wilson, K. Van; Clair, Michael G.; Turnipseed, D. Phil; Rebich, Richard A.

2009-01-01

The U.S. Geological Survey, in cooperation with the Mississippi Department of Environmental Quality, U.S. Department of Agriculture-Natural Resources Conservation Service, Mississippi Department of Transportation, U.S. Department of Agriculture-Forest Service, and the Mississippi Automated Resource Information System developed a 1:24,000-scale Watershed Boundary Dataset for Mississippi including watershed and subwatershed boundaries, codes, names, and areas. The Watershed Boundary Dataset for Mississippi provides a standard geographical framework for water-resources and selected land-resources planning. The original 8-digit subbasins (Hydrologic Unit Codes) were further subdivided into 10-digit watersheds (62.5 to 391 square miles (mi2)) and 12-digit subwatersheds (15.6 to 62.5 mi2) - the exceptions being the Delta part of Mississippi and the Mississippi River inside levees, which were subdivided into 10-digit watersheds only. Also, large water bodies in the Mississippi Sound along the coast were not delineated as small as a typical 12-digit subwatershed. All of the data - including watershed and subwatershed boundaries, subdivision codes and names, and drainage-area data - are stored in a Geographic Information System database, which are available at: http://ms.water.usgs.gov/. This map shows information on drainage and hydrography in the form of U.S. Geological Survey hydrologic unit boundaries for water-resource 2-digit regions, 4-digit subregions, 6-digit basins (formerly called accounting units), 8-digit subbasins (formerly called cataloging units), 10-digit watershed, and 12-digit subwatersheds in Mississippi. A description of the project study area, methods used in the development of watershed and subwatershed boundaries for Mississippi, and results are presented in Wilson and others (2008). The data presented in this map and by Wilson and others (2008) supersede the data presented for Mississippi by Seaber and others (1987) and U.S. Geological Survey (1977).

Exploring Digital Badges in University Courses: Relationships between Quantity, Engagement, and Performance

ERIC Educational Resources Information Center

Fanfarelli, Joseph R.; McDaniel, Rudy

2017-01-01

Digital badging research is gaining momentum as instructors and administrators consider new models for assessing learning in nontraditional contexts (e.g., informal science learning programs, flexible online courses, adaptive learning systems). While many studies are examining the effectiveness of digital badges for pedagogical functions, such as…

Using Digital Badges to Organize Student Learning Opportunities

ERIC Educational Resources Information Center

Ippoliti, Cinthya; Baeza, Victor D.

2017-01-01

A growing trend at universities is to use digital badges (micro-credentialing) for capturing the "soft skills" students gain outside of the classroom. Libraries can use this opportunity to become campus leaders in digital badges, using the system to not only promote their information literacy activities but to coordinate workshop…

Discovering and Mitigating Software Vulnerabilities through Large-Scale Collaboration

ERIC Educational Resources Information Center

Zhao, Mingyi

2016-01-01

In today's rapidly digitizing society, people place their trust in a wide range of digital services and systems that deliver latest news, process financial transactions, store sensitive information, etc. However, this trust does not have a solid foundation, because software code that supports this digital world has security vulnerabilities. These…

Development and Evaluation of Disaster Information Management System Using Digital Pens and Tabletop User Interfaces

NASA Astrophysics Data System (ADS)

Fukada, Hidemi; Kobayashi, Kazue; Satou, Kenji; Kawana, Hideyuki; Masuda, Tomohiro

Most traditional disaster information systems are necessary to post expert staff with high computer literacy to operate the system quickly and correctly in the tense situation when a disaster occurs. However, in the current disaster response system of local governments, it is not easy for local governments to post such expert staff because they are struggling with staff cuts due to administrative and fiscal reform. In this research, we propose a disaster information management system that can be easily operated, even under the disorderly conditions of a disaster, by municipal personnel in charge of disaster management. This system achieves usability enabling easy input of damage information, even by local government staff with no expertise, by using a digital pen and tabletop user interface. Evaluation was conducted by prospective users using a prototype, and the evaluation results are satisfactory with regard to the function and operationality of the proposed system.

Principles of logic and the use of digital geographic information systems

USGS Publications Warehouse

Robinove, Charles Joseph

1986-01-01

Digital geographic information systems allow many different types of data to be spatially and statistically analyzed. Logical operations can be performed on individual or multiple data planes by algorithms that can be implemented in computer systems. Users and creators of the systems should fully understand these operations. This paper describes the relationships of layers and features in geographic data bases and the principles of logic that can be applied by geographic information systems and suggests that a thorough knowledge of the data that are entered into a geographic data base and of the logical operations will produce results that are most satisfactory to the user. Methods of spatial analysis are reduced to their primitive logical operations and explained to further such understanding.

Digitalisierung - Management Zwischen 0 und 1

NASA Astrophysics Data System (ADS)

Friedrich, Stefan; Rachholz, Josef

2017-09-01

Digitization as a process of expressing actions and values by codes 0 and 1 has already has become part of our lives. Digitization enables enterprises to improve production, sales and to increase volume of production. However, no standard digitization strategy has been yet developed. Even in the digitized business process management system, the most important position remains to a human being. The improvement of software products, their availability and the education system in the area of introduction and use of information technology is thus a striking feature in development of managing (but also other) current processes.

[Ethical reflection on multidisciplinarity and confidentiality of information in medical imaging through new information and communication technologies].

PubMed

Béranger, J; Le Coz, P

2012-05-01

Technological advances in medical imaging has resulted in the exponential increase of the number of images per examination, caused the irreversible decline of the silver film and imposed digital imaging. This digitization is a concept whose levels of development are multiple, reflecting the complexity of this process of technological change. Under these conditions, the use of medical information via new information and communication technologies is at the crossroads of several scientific approaches and several disciplines (medicine, ethics, law, economics, psychology, etc.) surrounding the information systems in health, doctor-patient relationship and concepts that are associated. Each day, these new information and communication technologies open up new horizons and the space of possibilities, spectacularly developing access to information and knowledge. In this perspective of digital technology emergence impacting the multidisciplinary use of health information systems, the ethical questions are numerous, especially on the preservation of privacy, confidentiality and security of medical data, and their accessibility and integrity. Copyright © 2012 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

Limited Digital Response. Satellite Technology Demonstration, Technical Report No. 0426.

ERIC Educational Resources Information Center

Laurence, Dennis; Woughter, William

The VHF system used by the Satellite Technology Demonstration had a built-in digital response system to collect data about student programing. This paper describes the hardware and software required to implement and operate the system. In addition, information on the applications of this device is provided along with the results of a field…

Method and apparatus for analog signal conditioner for high speed, digital x-ray spectrometer

DOEpatents

Warburton, W.K.; Hubbard, B.

1999-02-09

A signal processing system which accepts input from an x-ray detector-preamplifier and produces a signal of reduced dynamic range for subsequent analog-to-digital conversion is disclosed. The system conditions the input signal to reduce the number of bits required in the analog-to-digital converter by removing that part of the input signal which varies only slowly in time and retaining the amplitude of the pulses which carry information about the x-rays absorbed by the detector. The parameters controlling the signal conditioner`s operation can be readily supplied in digital form, allowing it to be integrated into a feedback loop as part of a larger digital x-ray spectroscopy system. 13 figs.

Progress and challenges associated with digitizing and serving up Hawaii's geothermal data

NASA Astrophysics Data System (ADS)

Thomas, D. M.; Lautze, N. C.; Abdullah, M.

2012-12-01

This presentation will report on the status of our effort to digitize and serve up Hawaii's geothermal information, an undertaking that commenced in 2011 and will continue through at least 2013. This work is part of national project that is funded by the Department of Energy and managed by the Arizona State Geology Survey (AZGS). The data submitted to AZGS is being entered into the National Geothermal Data System (see http://www.stategeothermaldata.org/overview). We are also planning to host the information locally. Main facets of this project are to: - digitize and generate metadata for non-published geothermal documents relevant to the State of Hawaii - digitize ~100 years of paper records relevant to well permitting and water resources development and serve up information on the ~4500 water wells in the state - digitize, organize, and serve up information on research and geothermal exploratory drilling conducted from the 1980s to the present. - work with AZGS and OneGeology to contribute a geologic map for Hawaii that integrates geologic and geothermal resource data. By December 2012, we anticipate that the majority of the digitization will be complete, the geologic map will be approved, and that over 1000 documents will be hosted online through the University of Hawaii's library system (in the "Geothermal Collection" within the "Scholar Space" repository, see http://scholarspace.manoa.hawaii.edu/handle/10125/21320). Developing a 'user-friendly' web interface for the water well and drilling data will be a main task in the coming year. Challenges we have faced and anticipate include: 1) ensuring that no personally identifiable information (e.g. SSN, private telephone numbers, bank or credit account) is contained in the geothermal documents and well files; 2) Homeland Security regulations regarding release of information on critical infrastructure related to municipal water supply systems; 3) maintenance of the well database as future well data are developed with the state's expanding inventory of wells to meet private and public needs. Feedback is welcome.

Digital imaging and electronic patient records in pathology using an integrated department information system with PACS.

PubMed

Kalinski, Thomas; Hofmann, Harald; Franke, Dagmar-Sybilla; Roessner, Albert

2002-01-01

Picture archiving and communication systems have been widely used in radiology thus far. Owing to the progress made in digital photo technology, their use in medicine opens up further opportunities. In the field of pathology, digital imaging offers new possiblities for the documentation of macroscopic and microscopic findings. Digital imaging has the advantage that the data is permanently and readily available, independent of conventional archives. In the past, PACS was a separate entity. Meanwhile, however, PACS has been integrated in DIS, the department information system, which was also run separately in former times. The combination of these two systems makes the administration of patient data, findings and images easier. Moreover, thanks to the introduction of special communication standards, a data exchange between different department information systems and hospital information systems (HIS) is possible. This provides the basis for a communication platform in medicine, constituting an electronic patient record (EPR) that permits an interdisciplinary treatment of patients by providing data of findings and images from clinics treating the same patient. As the pathologic diagnosis represents a central and often therapy-determining component, it is of utmost importance to add pathologic diagnoses to the EPR. Furthermore, the pathologist's work is considerably facilitated when he is able to retrieve additional data from the patient file. In this article, we describe our experience gained with the combined PACS and DIS systems recently installed at the Department of Pathology, University of Magdeburg. Moreover, we evaluate the current situation and future prospects for PACS in pathology.

Evaluation Methodologies for Information Management Systems; Building Digital Tobacco Industry Document Libraries at the University of California, San Francisco Library/Center for Knowledge Management; Experiments with the IFLA Functional Requirements for Bibliographic Records (FRBR); Coming to Term: Designing the Texas Email Repository Model.

ERIC Educational Resources Information Center

Morse, Emile L.; Schmidt, Heidi; Butter, Karen; Rider, Cynthia; Hickey, Thomas B.; O'Neill, Edward T.; Toves, Jenny; Green, Marlan; Soy, Sue; Gunn, Stan; Galloway, Patricia

2002-01-01

Includes four articles that discuss evaluation methods for information management systems under the Defense Advanced Research Projects Agency; building digital libraries at the University of California San Francisco's Tobacco Control Archives; IFLA's Functional Requirements for Bibliographic Records; and designing the Texas email repository model…

A flight investigation of simulated data link communications during single-pilot IFR flight

NASA Technical Reports Server (NTRS)

Parker, J. F.; Duffy, J. W.; Christensen, D. G.

1983-01-01

A Flight Data Console (FDC) was developed to allow simulation of a digital communications link to replace the current voice communication system used in air traffic control (ATC). The voice system requires manipulation of radio equipment, read-back of clearances, and mental storage of critical information items, all contributing to high workload, particularly during single-pilot operations. This was an inflight study to determine how a digital communications system might reduce cockpit workload, improve flight proficiency, and be accepted by general aviation pilots. Results show that instrument flight, including approach and landing, can be accomplished quite effectively using a digital data link system for ATC communications. All pilots expressed a need for a back-up voice channel. When included, this channel was used sparingly and principally to confirm any item of information about which there might be uncertainty.

Three-Dimensional Extension of a Digital Library Service System

ERIC Educational Resources Information Center

Xiao, Long

2010-01-01

Purpose: The paper aims to provide an overall methodology and case study for the innovation and extension of a digital library, especially the service system. Design/methodology/approach: Based on the three-dimensional structure theory of the information service industry, this paper combines a comprehensive analysis with the practical experiences…

Developing the World's Digital Collection on Peaceful Uses of Atomic Energy.

ERIC Educational Resources Information Center

Levine, Emil

1997-01-01

Discusses the developers/development, maintainers, and users of the digital collection on peaceful uses of nuclear energy, produced by the International Nuclear Information System (INIS) of the International Atomic Energy Agency (IAEA). Sensitive to users in both developing and highly developed countries, this system provides closer linkage…

Digital and biological computing in organizations.

PubMed

Kampfner, Roberto R

2002-01-01

Michael Conrad unveiled many of the fundamental characteristics of biological computing. Underlying the behavioral variability and the adaptability of biological systems are these characteristics, including the ability of biological information processing to exploit quantum features at the atomic level, the powerful 3-D pattern recognition capabilities of macromolecules, the computational efficiency, and the ability to support biological function. Among many other things, Conrad formalized and explicated the underlying principles of biological adaptability, characterized the differences between biological and digital computing in terms of a fundamental tradeoff between adaptability and programmability of information processing, and discussed the challenges of interfacing digital computers and human society. This paper is about the encounter of biological and digital computing. The focus is on the nature of the biological information processing infrastructure of organizations and how it can be extended effectively with digital computing. In order to achieve this goal effectively, however, we need to embed properly digital computing into the information processing aspects of human and social behavior and intelligence, which are fundamentally biological. Conrad's legacy provides a firm, strong, and inspiring foundation for this endeavor.

Self-Diagnostics Digitally Controlled Pacemaker/Defibrillators: A Design Plan for Incorporating Diagnostics and Digital Control in the schema of a Pacemaker/Defibrillator Design

DTIC Science & Technology

2005-09-01

of a system to store and retrieve digital/ wireless communication information from a pacemaker/ defibrillator, or other device , and to alert medical... wireless communication information from a pacemaker/defibrillator, or other device , and to alert medical personnel when a person is experiencing...with heart, pacing, program, test, sensor , circuit) where the individual needs immediate attention an audible alert will go off at the nurse’s

On Information Retrieval (IR) Systems: Revisiting Their Development, Evaluation Methodologies, and Assumptions (SIGs LAN, ED).

ERIC Educational Resources Information Center

Stirling, Keith

2000-01-01

Describes a session on information retrieval systems that planned to discuss relevance measures with Web-based information retrieval; retrieval system performance and evaluation; probabilistic independence of index terms; vector-based models; metalanguages and digital objects; how users assess the reliability, timeliness and bias of information;…

Eliciting Parents' Individual Requirements for an Inclusive Digital School System.

PubMed

Eftring, Håkan; Rassmus-Gröhn, Kirsten; Hedvall, Per-Olof

2016-01-01

Parents often have a busy time sorting out their life puzzles, including getting information about their children's activities in school. More and more communication between teachers and parents take place via digital school systems. It can be hard for parents to find the information they are looking for and the teacher decides when information is sent and what communication method to use. All parents, but especially parents with disabilities, might have individual preferences on how to receive information and how to adapt meetings at school. In this paper we present a project where we involved parents and teachers in focus groups, an idea workshop and iterative user trials of a digital prototype. The goal was to elicit parents' individual requirements for an inclusive digital school system, where they can store their individual preferences about how and when to receive information from school and what requirements they have on meetings at school. Preliminary results show that we managed to create open and focused discussions among parents and teachers. The parents reacted very positively on an onboarding page with the possibility to quickly and easily enter preferences after their first log in, but more work needs to be done on how preferences are categorized on the onboarding page. Finally, parents need to get clear feedback from teachers and school when they have entered or updated preferences, so they can trust that their preferences will be met.

Research on moving object detection based on frog's eyes

NASA Astrophysics Data System (ADS)

Fu, Hongwei; Li, Dongguang; Zhang, Xinyuan

2008-12-01

On the basis of object's information processing mechanism with frog's eyes, this paper discussed a bionic detection technology which suitable for object's information processing based on frog's vision. First, the bionics detection theory by imitating frog vision is established, it is an parallel processing mechanism which including pick-up and pretreatment of object's information, parallel separating of digital image, parallel processing, and information synthesis. The computer vision detection system is described to detect moving objects which has special color, special shape, the experiment indicates that it can scheme out the detecting result in the certain interfered background can be detected. A moving objects detection electro-model by imitating biologic vision based on frog's eyes is established, the video simulative signal is digital firstly in this system, then the digital signal is parallel separated by FPGA. IN the parallel processing, the video information can be caught, processed and displayed in the same time, the information fusion is taken by DSP HPI ports, in order to transmit the data which processed by DSP. This system can watch the bigger visual field and get higher image resolution than ordinary monitor systems. In summary, simulative experiments for edge detection of moving object with canny algorithm based on this system indicate that this system can detect the edge of moving objects in real time, the feasibility of bionic model was fully demonstrated in the engineering system, and it laid a solid foundation for the future study of detection technology by imitating biologic vision.

Focus and perspective adaptive digital surgical microscope: optomechanical design and experimental implementation

NASA Astrophysics Data System (ADS)

Claus, Daniel; Reichert, Carsten; Herkommer, Alois

2017-05-01

This paper relates to the improvement of conventional surgical stereo microscopy via the application of digital recording devices and adaptive optics. The research is aimed at improving the working conditions of the surgeon during the operation, such that free head movement is possible. The depth clues known from conventional stereo microscopy in interaction with the human eye's functionality, such as convergence, disparity, angular elevation, parallax, and accommodation, are implemented in a digital recording system via adaptive optomechanical components. Two laterally moving pupil apertures have been used mimicking the digital implementation of the eye's vergence and head motion. The natural eye's accommodation is mimicked via the application of a tunable lens. Additionally, another system has been built, which enables tracking the surgeon's eye pupil through a digital displaying stereoscopic microscope to supply the necessary information for steering the recording system. The optomechanical design and experimental results for both systems, digital recording stereoscopic microscope and pupil tracking system, are shown.

Concept of JINR Corporate Information System

NASA Astrophysics Data System (ADS)

Filozova, I. A.; Bashashin, M. V.; Korenkov, V. V.; Kuniaev, S. V.; Musulmanbekov, G.; Semenov, R. N.; Shestakova, G. V.; Strizh, T. A.; Ustenko, P. V.; Zaikina, T. N.

2016-09-01

The article presents the concept of JINR Corporate Information System (JINR CIS). Special attention is given to the information support of scientific researches - Current Research Information System as a part of the corporate information system. The objectives of such a system are focused on ensuring an effective implementation and research by using the modern information technology, computer technology and automation, creation, development and integration of digital resources on a common conceptual framework. The project assumes continuous system development, introduction the new information technologies to ensure the technological system relevance.

Application of Digital Object Identifiers to data sets at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC)

NASA Astrophysics Data System (ADS)

Vollmer, B.; Ostrenga, D.; Johnson, J. E.; Savtchenko, A. K.; Shen, S.; Teng, W. L.; Wei, J. C.

2013-12-01

Digital Object Identifiers (DOIs) are applied to selected data sets at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC). The DOI system provides an Internet resolution service for unique and persistent identifiers of digital objects. Products assigned DOIs include data from the NASA MEaSUREs Program, the Earth Observing System (EOS) Aqua Atmospheric Infrared Sounder (AIRS) and EOS Aura High Resolution Dynamics Limb Sounder (HIRDLS). DOIs are acquired and registered through EZID, California Digital Library and DataCite. GES DISC hosts a data set landing page associated with each DOI containing information on and access to the data including a recommended data citation when using the product in research or applications. This work includes participation with the earth science community (e.g., Earth Science Information Partners (ESIP) Federation) and the NASA Earth Science Data and Information System (ESDIS) Project to identify, establish and implement best practices for assigning DOIs and managing supporting information, including metadata, for earth science data sets. Future work includes (1) coordination with NASA mission Science Teams and other data providers on the assignment of DOIs for other GES DISC data holdings, particularly for future missions such as Orbiting Carbon Observatory -2 and -3 (OCO-2, OCO-3) and projects (MEaSUREs 2012), (2) construction of landing pages that are both human and machine readable, and (3) pursuing the linking of data and publications with tools such as the Thomson Reuters Data Citation Index.

Assessing stability and performance of a digitally enabled supply chain: Retrospective of a pilot in Uttar Pradesh, India.

PubMed

Gilbert, Sarah Skye; Thakare, Neeraj; Ramanujapuram, Arun; Akkihal, Anup

2017-04-19

Immunization supply chains in low resource settings do not always reach children with necessary vaccines. Digital information systems can enable real time visibility of inventory and improve vaccine availability. In 2014, a digital, mobile/web-based information system was implemented in two districts of Uttar Pradesh, India. This retrospective investigates improvements and stabilization of supply chain performance following introduction of the digital information system. All data were collected via the digital information system between March 2014 and September 2015. Data included metadata and transaction logs providing information about users, facilities, and vaccines. Metrics evaluated include adoption (system access, timeliness and completeness), data quality (error rates), and performance (stock availability on immunization session days, replenishment response duration, rate of zero stock events). Stability was defined as the phase in which quality and performance metrics achieved equilibrium rates with minimal volatility. The analysis compared performance across different facilities and vaccines. Adoption appeared sufficiently high from the onset to commence stability measures of data quality and supply chain performance. Data quality stabilized from month 3 onwards, and supply chain performance stabilized from month 13 onwards. For data quality, error rates reduced by two thirds post stabilization. Although vaccine availability remained high throughout the pilot, the three lowest-performing facilities improved from 91.05% pre-stability to 98.70% post-stability (p<0.01; t-test). Average replenishment duration (as a corrective response to stock-out events) decreased 52.3% from 4.93days to 2.35days (p<0.01; t-test). Diphtheria-tetanus-pertussis vaccine was significantly less likely to be stocked out than any other material. The results suggest that given sufficient adoption, stability is sequentially achieved, beginning with data quality, and then performance. Identifying when a pilot stabilizes can enable more predictable, reliable cost estimates, and outcome forecasts in the scale-up phase. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

User Needs of Digital Service Web Portals: A Case Study

ERIC Educational Resources Information Center

Heo, Misook; Song, Jung-Sook; Seol, Moon-Won

2013-01-01

The authors examined the needs of digital information service web portal users. More specifically, the needs of Korean cultural portal users were examined as a case study. The conceptual framework of a web-based portal is that it is a complex, web-based service application with characteristics of information systems and service agents. In…

Optical information processing at NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Reid, Max B.; Bualat, Maria G.; Cho, Young C.; Downie, John D.; Gary, Charles K.; Ma, Paul W.; Ozcan, Meric; Pryor, Anna H.; Spirkovska, Lilly

1993-01-01

The combination of analog optical processors with digital electronic systems offers the potential of tera-OPS computational performance, while often requiring less power and weight relative to all-digital systems. NASA is working to develop and demonstrate optical processing techniques for on-board, real time science and mission applications. Current research areas and applications under investigation include optical matrix processing for space structure vibration control and the analysis of Space Shuttle Main Engine plume spectra, optical correlation-based autonomous vision for robotic vehicles, analog computation for robotic path planning, free-space optical interconnections for information transfer within digital electronic computers, and multiplexed arrays of fiber optic interferometric sensors for acoustic and vibration measurements.

An accuracy aware low power wireless EEG unit with information content based adaptive data compression.

PubMed

Tolbert, Jeremy R; Kabali, Pratik; Brar, Simeranjit; Mukhopadhyay, Saibal

2009-01-01

We present a digital system for adaptive data compression for low power wireless transmission of Electroencephalography (EEG) data. The proposed system acts as a base-band processor between the EEG analog-to-digital front-end and RF transceiver. It performs a real-time accuracy energy trade-off for multi-channel EEG signal transmission by controlling the volume of transmitted data. We propose a multi-core digital signal processor for on-chip processing of EEG signals, to detect signal information of each channel and perform real-time adaptive compression. Our analysis shows that the proposed approach can provide significant savings in transmitter power with minimal impact on the overall signal accuracy.

DIAS Project: The establishment of a European digital upper atmosphere server

NASA Astrophysics Data System (ADS)

Belehaki, A.; Cander, Lj.; Zolesi, B.; Bremer, J.; Juren, C.; Stanislawska, I.; Dialetis, D.; Hatzopoulos, M.

2005-08-01

The main objective of DIAS (European Digital Upper Atmosphere Server) project is to develop a pan-European digital data collection on the state of the upper atmosphere, based on real-time information and historical data collections provided by most operating ionospheric stations in Europe. A DIAS system will distribute information required by various groups of users for the specification of upper atmospheric conditions over Europe suitable for nowcasting and forecasting purposes. The successful operation of the DIAS system will lead to the development of new European added-value products and services, to the effective use of observational data in operational applications and consequently to the expansion of the relevant European market.

Information in the Biosphere: Biological and Digital Worlds.

PubMed

Gillings, Michael R; Hilbert, Martin; Kemp, Darrell J

2016-03-01

Evolution has transformed life through key innovations in information storage and replication, including RNA, DNA, multicellularity, and culture and language. We argue that the carbon-based biosphere has generated a cognitive system (humans) capable of creating technology that will result in a comparable evolutionary transition. Digital information has reached a similar magnitude to information in the biosphere. It increases exponentially, exhibits high-fidelity replication, evolves through differential fitness, is expressed through artificial intelligence (AI), and has facility for virtually limitless recombination. Like previous evolutionary transitions, the potential symbiosis between biological and digital information will reach a critical point where these codes could compete via natural selection. Alternatively, this fusion could create a higher-level superorganism employing a low-conflict division of labor in performing informational tasks. Copyright © 2015 Elsevier Ltd. All rights reserved.

Automated Categorization Scheme for Digital Libraries in Distance Learning: A Pattern Recognition Approach

ERIC Educational Resources Information Center

Gunal, Serkan

2008-01-01

Digital libraries play a crucial role in distance learning. Nowadays, they are one of the fundamental information sources for the students enrolled in this learning system. These libraries contain huge amount of instructional data (text, audio and video) offered by the distance learning program. Organization of the digital libraries is…

"Digital Futures in Teacher Education": Exploring Open Approaches towards Digital Literacy

ERIC Educational Resources Information Center

Gruszczynska, Anna; Merchant, Guy; Pountney, Richard,

2013-01-01

This paper reports the findings of a project "Digital Futures in Teacher Education" (DeFT) undertaken as part of the third phase of the Joint Information Systems Committee (JISC) UK Open Educational Resources (OER) programme. It builds on previous work (Gruszczynska and Pountney, 2012, 2013) that has addressed attempts to embed OER…

The Domain Shared by Computational and Digital Ontology: A Phenomenological Exploration and Analysis

ERIC Educational Resources Information Center

Compton, Bradley Wendell

2009-01-01

The purpose of this dissertation is to explore and analyze a domain of research thought to be shared by two areas of philosophy: computational and digital ontology. Computational ontology is philosophy used to develop information systems also called computational ontologies. Digital ontology is philosophy dealing with our understanding of Being…

Mapping invasive weeds and their control with spatial information technologies

USDA-ARS?s Scientific Manuscript database

We discuss applications of airborne multispectral digital imaging systems, imaging processing techniques, global positioning systems (GPS), and geographic information systems (GIS) for mapping the invasive weeds giant salvinia (Salvinia molesta) and Brazilian pepper (Schinus terebinthifolius) and fo...

Study report on laser storage and retrieval of image data

NASA Technical Reports Server (NTRS)

Becker, C. H.

1976-01-01

The theoretical foundation is presented for a system of real-time nonphotographic and nonmagnetic digital laser storage and retrieval of image data. The system utilizes diffraction-limited laser focusing upon thin metal films, melting elementary holes in the metal films in laser focus. The metal films are encapsulated in rotating flexible mylar discs which act as the permanent storage carries. Equal sized holes encompass two dimensional digital ensembles of information bits which are time-sequentially (bit by bit) stored and retrieved. The bits possess the smallest possible size, defined by the Rayleigh criterion of coherent physical optics. Space and time invariant reflective read-out of laser discs with a small laser, provides access to the stored digital information. By eliminating photographic and magnetic data processing, which characterize the previous state of the art, photographic grain, diffusion, and gamma-distortion do not exist. Similarly, magnetic domain structures, magnetic gaps, and magnetic read-out are absent with a digital laser disc system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choong, W. -S.; Abu-Nimeh, F.; Moses, W. W.

Here, we present a 16-channel front-end readout board for the OpenPET electronics system. A major task in developing a nuclear medical imaging system, such as a positron emission computed tomograph (PET) or a single-photon emission computed tomograph (SPECT), is the electronics system. While there are a wide variety of detector and camera design concepts, the relatively simple nature of the acquired data allows for a common set of electronics requirements that can be met by a flexible, scalable, and high-performance OpenPET electronics system. The analog signals from the different types of detectors used in medical imaging share similar characteristics, whichmore » allows for a common analog signal processing. The OpenPET electronics processes the analog signals with Detector Boards. Here we report on the development of a 16-channel Detector Board. Each signal is digitized by a continuously sampled analog-to-digital converter (ADC), which is processed by a field programmable gate array (FPGA) to extract pulse height information. A leading edge discriminator creates a timing edge that is "time stamped" by a time-to-digital converter (TDC) implemented inside the FPGA. In conclusion, this digital information from each channel is sent to an FPGA that services 16 analog channels, and then information from multiple channels is processed by this FPGA to perform logic for crystal lookup, DOI calculation, calibration, etc.« less

Demonstration of holographic smart card system using the optical memory technology

NASA Astrophysics Data System (ADS)

Kim, JungHoi; Choi, JaeKwang; An, JunWon; Kim, Nam; Lee, KwonYeon; Jeon, SeckHee

2003-05-01

In this paper, we demonstrate the holographic smart card system using digital holographic memory technique that uses reference beam encrypted by the random phase mask to prevent unauthorized users from accessing the stored digital page. The input data that include document data, a picture of face, and a fingerprint for identification is encoded digitally and then coupled with the reference beam modulated by a random phase mask. Therefore, this proposed system can execute recording in the order of MB~GB and readout all personal information from just one card without any additional database system. Also, recorded digital holograms can't be reconstructed without a phase key and can't be copied by using computers, scanners, or photography.

The natural resources inventory system ASVT project

NASA Technical Reports Server (NTRS)

Joyce, A. T.

1979-01-01

The hardware/software and the associated procedures for a natural resource inventory and information system based on the use of LANDSAT-acquired multispectral scanner digital data is described. The system is designed to derive land cover/vegetation information from LANDSAT data and geographically reference this information for the production of various types of maps and for the compilation of acreage by land cover/vegetation category. The system also provides for data base building so that the LANDSAT-derived information can be related to information digitized from other sources (e.g., soils maps) in a geographic context in order to address specific applications. These applications include agricultural crop production estimation, erosion hazard-reforestation need assessment, whitetail deer habitat assessment, and site selection. The system is tested in demonstration areas located in the state of Mississippi, and the results of these application demonstrations are presented. A cost-efficiency comparison of producing land cover/vegetation maps and statistics with this system versus the use of small-scale aerial photography is made.

Access control based on attribute certificates for medical intranet applications.

PubMed

Mavridis, I; Georgiadis, C; Pangalos, G; Khair, M

2001-01-01

Clinical information systems frequently use intranet and Internet technologies. However these technologies have emphasized sharing and not security, despite the sensitive and private nature of much health information. Digital certificates (electronic documents which recognize an entity or its attributes) can be used to control access in clinical intranet applications. To outline the need for access control in distributed clinical database systems, to describe the use of digital certificates and security policies, and to propose the architecture for a system using digital certificates, cryptography and security policy to control access to clinical intranet applications. We have previously developed a security policy, DIMEDAC (Distributed Medical Database Access Control), which is compatible with emerging public key and privilege management infrastructure. In our implementation approach we propose the use of digital certificates, to be used in conjunction with DIMEDAC. Our proposed access control system consists of two phases: the ways users gain their security credentials; and how these credentials are used to access medical data. Three types of digital certificates are used: identity certificates for authentication; attribute certificates for authorization; and access-rule certificates for propagation of access control policy. Once a user is identified and authenticated, subsequent access decisions are based on a combination of identity and attribute certificates, with access-rule certificates providing the policy framework. Access control in clinical intranet applications can be successfully and securely managed through the use of digital certificates and the DIMEDAC security policy.

Digital mining claim density map for federal lands in Wyoming: 1996

USGS Publications Warehouse

Hyndman, Paul C.; Campbell, Harry W.

1999-01-01

This report describes a digital map generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim density information for federal lands in Wyoming as of March 1997. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. There is no paper map included in this Open-File report. In accordance with the Federal Land Policy and Management Act of 1976 (FLPMA), all unpatented mining claims, mill, and tunnel sites must be recorded at the appropriate BLM State office. BLM maintains a cumulative computer listing of mining claims in the Mining Claim Recordation System (MCRS) database with locations given by meridian, township, range, and section. A mining claim is considered closed when the claim is relinquished or a formal BLM decision declaring the mining claim null and void has been issued and the appeal period has expired. All other mining claims filed with BLM are considered to be open and actively held. The digital map (figure 1.) with the mining claim density database available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller.

Digital mining claim density map for federal lands in Colorado: 1996

USGS Publications Warehouse

Hyndman, Paul C.; Campbell, Harry W.

1999-01-01

This report describes a digital map generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim density information for federal lands in Colorado as of March 1997. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. There is no paper map included in this Open-File report. In accordance with the Federal Land Policy and Management Act of 1976 (FLPMA), all unpatented mining claims, mill, and tunnel sites must be recorded at the appropriate BLM State office. BLM maintains a cumulative computer listing of mining claims in the Mining Claim Recordation System (MCRS) database with locations given by meridian, township, range, and section. A mining claim is considered closed when the claim is relinquished or a formal BLM decision declaring the mining claim null and void has been issued and the appeal period has expired. All other mining claims filed with BLM are considered to be open and actively held. The digital map (figure 1.) with the mining claim density database available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller.

Digital mining claim density map for federal lands in Washington: 1996

USGS Publications Warehouse

Hyndman, Paul C.; Campbell, Harry W.

1999-01-01

This report describes a digital map generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim density information for federal lands in Washington as of March 1997. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. There is no paper map included in this Open-File report. In accordance with the Federal Land Policy and Management Act of 1976 (FLPMA), all unpatented mining claims, mill, and tunnel sites must be recorded at the appropriate BLM State office. BLM maintains a cumulative computer listing of mining claims in the Mining Claim Recordation System (MCRS) database with locations given by meridian, township, range, and section. A mining claim is considered closed when the claim is relinquished or a formal BLM decision declaring the mining claim null and void has been issued and the appeal period has expired. All other mining claims filed with BLM are considered to be open and actively held. The digital map (figure 1.) with the mining claim density database available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller.

Optical communication in free space

NASA Technical Reports Server (NTRS)

Plotkin, H. H.; Mcavoy, N.; Fitzmaurice, M. W.

1974-01-01

Two classes of laser communication systems for handling very high data rates across inter-satellite distances are considered that provide for high antenna gains, wide modulation bandwidths, and optical receiver sensitivities. System design considerations are based upon the carbon dioxide laser modulation to accommodate digital or analog information, and the neodymium doped YAG laser pulse for digital modulation.

Restructuring of Educational Systems in the Digital Age from a Co-Evolutionary Perspective

ERIC Educational Resources Information Center

Davis, N.; Eickelmann, B.; Zaka, P.

2013-01-01

There have been repeated calls for restructuring of schooling to take advantage of information and communication technologies (ICT). This article recognizes an increasing range of radical restructuring resulting from the co-evolution of education and digital technologies in school systems and related activity in the global ecosystem. Research of…

Canadian community pharmacists' use of digital health technologies in practice.

PubMed

Leung, Valerie; Tharmalingam, Sukirtha; Cooper, Janet; Charlebois, Maureen

2016-01-01

In 2010, a pan-Canadian study on the current state and benefits of provincial drug information systems (DIS) found that substantial benefits were being realized and that pharmacists perceived DIS to be a valuable tool in the evolving models of pharmacy practice. To understand changes in digital health and the impact on practice since that time, a survey of community pharmacists in Canada was conducted. In 2014, Canada Health Infoway (Infoway) and the Canadian Pharmacists Association (CPhA) invited community pharmacists to participate in a Web-based survey to understand their use and perceived benefits of digital health in practice. The survey was open from April 15 to May 12, 2014. Of the 447 survey responses, almost all used some form of digital health in practice. Those with access to DIS and provincial laboratory information systems (LIS) reported increased productivity and better quality of care. Those without access to these systems would overwhelmingly like access. There have been significant advances in digital health and community pharmacy practice over the past several years. In addition to digital health benefits in the areas of productivity and quality of care, pharmacists are also experiencing substantial benefits in areas related to recently expanded scope of practice activities such as ordering lab tests. Community pharmacists frequently use digital health in practice and recognize the benefits of these technologies. Digital health is, and will continue to be, a key enabler for practice transformation and improved quality of care. Can Pharm J (Ott) 2016;149:xx-xx.

A REVIEW OF HUMAN-SYSTEM INTERFACE DESIGN ISSUES OBSERVED DURING ANALOG-TO-DIGITAL AND DIGITAL-TO-DIGITAL MIGRATIONS IN U.S. NUCLEAR POWER PLANTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kovesdi, C.; Joe, J.

The United States (U.S.) Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program is developing a scientific basis through targeted research and development (R&D) to support the U.S. nuclear power plant (NPP) fleet in extending their existing licensing period and ensuring their long-term reliability, productivity, safety, and security. Over the last several years, human factors engineering (HFE) professionals at the Idaho National Laboratory (INL) have supported the LWRS Advanced Instrumentation, Information, and Control (II&C) System Technologies pathway across several U.S. commercial NPPs in analog-to-digital migrations (i.e., turbine control systems) and digital-to-digital migrations (i.e., Safety Parameter Display System). These effortsmore » have included in-depth human factors evaluation of proposed human-system interface (HSI) design concepts against established U.S. Nuclear Regulatory Commission (NRC) design guidelines from NUREG-0700, Rev 2 to inform subsequent HSI design prior to transitioning into Verification and Validation. This paper discusses some of the overarching design issues observed from these past HFE evaluations. In addition, this work presents some observed challenges such as common tradeoffs utilities are likely to face when introducing new HSI technologies into NPP hybrid control rooms. The primary purpose of this work is to distill these observed design issues into general HSI design guidance that industry can use in early stages of HSI design.« less

Proceedings of the International Association for Development of the Information Society (IADIS) International Conference on Cognition and Exploratory Learning in Digital Age (14th, Vilamoura, Algarve, Portugal, October 18-20, 2017)

ERIC Educational Resources Information Center

Sampson, Demetrios G., Ed.; Spector, J. Michael, Ed.; Ifenthaler, Dirk, Ed.; Isaías, Pedro, Ed.

2017-01-01

These proceedings contain the papers of the 14th International Conference on Cognition and Exploratory Learning in the Digital Age (CELDA 2017), 18-20 October 2017, which has been organized by the International Association for Development of the Information Society (IADIS) and endorsed by the Japanese Society for Information and Systems in…

A study on airborne integrated display system and human information processing

NASA Technical Reports Server (NTRS)

Mizumoto, K.; Iwamoto, H.; Shimizu, S.; Kuroda, I.

1983-01-01

The cognitive behavior of pilots was examined in an experiment involving mock ups of an eight display electronic attitude direction indicator for an airborne integrated display. Displays were presented in digital, analog digital, and analog format to experienced pilots. Two tests were run, one involving the speed of memorization in a single exposure and the other comprising two five second exposures spaced 30 sec apart. Errors increased with the speed of memorization. Generally, the analog information was assimilated faster than the digital data, with regard to the response speed. Information processing was quantified as 25 bits for the first five second exposure and 15 bits during the second.

A front-end readout Detector Board for the OpenPET electronics system

NASA Astrophysics Data System (ADS)

Choong, W.-S.; Abu-Nimeh, F.; Moses, W. W.; Peng, Q.; Vu, C. Q.; Wu, J.-Y.

2015-08-01

We present a 16-channel front-end readout board for the OpenPET electronics system. A major task in developing a nuclear medical imaging system, such as a positron emission computed tomograph (PET) or a single-photon emission computed tomograph (SPECT), is the electronics system. While there are a wide variety of detector and camera design concepts, the relatively simple nature of the acquired data allows for a common set of electronics requirements that can be met by a flexible, scalable, and high-performance OpenPET electronics system. The analog signals from the different types of detectors used in medical imaging share similar characteristics, which allows for a common analog signal processing. The OpenPET electronics processes the analog signals with Detector Boards. Here we report on the development of a 16-channel Detector Board. Each signal is digitized by a continuously sampled analog-to-digital converter (ADC), which is processed by a field programmable gate array (FPGA) to extract pulse height information. A leading edge discriminator creates a timing edge that is ``time stamped'' by a time-to-digital converter (TDC) implemented inside the FPGA . This digital information from each channel is sent to an FPGA that services 16 analog channels, and then information from multiple channels is processed by this FPGA to perform logic for crystal lookup, DOI calculation, calibration, etc.

A front-end readout Detector Board for the OpenPET electronics system

DOE PAGES

Choong, W. -S.; Abu-Nimeh, F.; Moses, W. W.; ...

2015-08-12

Here, we present a 16-channel front-end readout board for the OpenPET electronics system. A major task in developing a nuclear medical imaging system, such as a positron emission computed tomograph (PET) or a single-photon emission computed tomograph (SPECT), is the electronics system. While there are a wide variety of detector and camera design concepts, the relatively simple nature of the acquired data allows for a common set of electronics requirements that can be met by a flexible, scalable, and high-performance OpenPET electronics system. The analog signals from the different types of detectors used in medical imaging share similar characteristics, whichmore » allows for a common analog signal processing. The OpenPET electronics processes the analog signals with Detector Boards. Here we report on the development of a 16-channel Detector Board. Each signal is digitized by a continuously sampled analog-to-digital converter (ADC), which is processed by a field programmable gate array (FPGA) to extract pulse height information. A leading edge discriminator creates a timing edge that is "time stamped" by a time-to-digital converter (TDC) implemented inside the FPGA. In conclusion, this digital information from each channel is sent to an FPGA that services 16 analog channels, and then information from multiple channels is processed by this FPGA to perform logic for crystal lookup, DOI calculation, calibration, etc.« less

Quantitative Evaluation of Surface Color of Tomato Fruits Cultivated in Remote Farm Using Digital Camera Images

NASA Astrophysics Data System (ADS)

Hashimoto, Atsushi; Suehara, Ken-Ichiro; Kameoka, Takaharu

To measure the quantitative surface color information of agricultural products with the ambient information during cultivation, a color calibration method for digital camera images and a remote monitoring system of color imaging using the Web were developed. Single-lens reflex and web digital cameras were used for the image acquisitions. The tomato images through the post-ripening process were taken by the digital camera in both the standard image acquisition system and in the field conditions from the morning to evening. Several kinds of images were acquired with the standard RGB color chart set up just behind the tomato fruit on a black matte, and a color calibration was carried out. The influence of the sunlight could be experimentally eliminated, and the calibrated color information consistently agreed with the standard ones acquired in the system through the post-ripening process. Furthermore, the surface color change of the tomato on the tree in a greenhouse was remotely monitored during maturation using the digital cameras equipped with the Field Server. The acquired digital color images were sent from the Farm Station to the BIFE Laboratory of Mie University via VPN. The time behavior of the tomato surface color change during the maturing process could be measured using the color parameter calculated based on the obtained and calibrated color images along with the ambient atmospheric record. This study is a very important step in developing the surface color analysis for both the simple and rapid evaluation of the crop vigor in the field and to construct an ambient and networked remote monitoring system for food security, precision agriculture, and agricultural research.

ENVIRONMENTAL REVIEWS AND CASE STUDIES: Addressing the Public Outreach Responsibilities of the National Historic Preservation Act: Argonne National Laboratory’s Box Digital Display Platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

O’Rourke, Daniel J.; Weber, Cory C.; Richmond, Pamela D.

Federal agencies are made responsible for managing the historic properties under their jurisdiction by the National Historic Preservation Act of 1966, as amended. A component of this responsibility is to mitigate the effect of a federal undertaking on historic properties through mitigation often through documentation. Providing public access to this documentation has always been a challenge. To address the issue of public access to mitigation information, personnel from Argonne National Laboratory created the Box Digital Display Platform, a system for communicating information about historic properties to the public. The platform, developed for the US Army Dugway Proving Ground, uses shortmore » introductory videos to present a topic but can also incorporate photos, drawings, GIS information, and documents. The system operates from a small, self-contained computer that can be attached to any digital monitor via an HDMI cable. The system relies on web-based software that allows the information to be republished as a touch-screen device application or as a website. The system does not connect to the Internet, and this increases security and eliminates the software maintenance fees associated with websites. The platform is designed to incorporate the products of past documentation to make this information more accessible to the public; specifically those documentations developed using the Historic American Building Survey/ Historic American Engineering Record (HABS/HAER) standards. Argonne National Laboratory’s Box Digital Display Platform can assist federal agencies in complying with the requirements of the National Historic Preservation Act. Environmental Practice 18: 209–213 (2016)« less

A generalized approach to computer synthesis of digital holograms

NASA Technical Reports Server (NTRS)

Hopper, W. A.

1973-01-01

Hologram is constructed by taking number of digitized sample points and blending them together to form ''continuous'' picture. New system selects better set of sample points resulting in improved hologram from same amount of information.

Introduction to focus issue: intrinsic and designed computation: information processing in dynamical systems--beyond the digital hegemony.

PubMed

Crutchfield, James P; Ditto, William L; Sinha, Sudeshna

2010-09-01

How dynamical systems store and process information is a fundamental question that touches a remarkably wide set of contemporary issues: from the breakdown of Moore's scaling laws--that predicted the inexorable improvement in digital circuitry--to basic philosophical problems of pattern in the natural world. It is a question that also returns one to the earliest days of the foundations of dynamical systems theory, probability theory, mathematical logic, communication theory, and theoretical computer science. We introduce the broad and rather eclectic set of articles in this Focus Issue that highlights a range of current challenges in computing and dynamical systems.

Fingerprint verification on medical image reporting system.

PubMed

Chen, Yen-Cheng; Chen, Liang-Kuang; Tsai, Ming-Dar; Chiu, Hou-Chang; Chiu, Jainn-Shiun; Chong, Chee-Fah

2008-03-01

The healthcare industry is recently going through extensive changes, through adoption of robust, interoperable healthcare information technology by means of electronic medical records (EMR). However, a major concern of EMR is adequate confidentiality of the individual records being managed electronically. Multiple access points over an open network like the Internet increases possible patient data interception. The obligation is on healthcare providers to procure information security solutions that do not hamper patient care while still providing the confidentiality of patient information. Medical images are also part of the EMR which need to be protected from unauthorized users. This study integrates the techniques of fingerprint verification, DICOM object, digital signature and digital envelope in order to ensure that access to the hospital Picture Archiving and Communication System (PACS) or radiology information system (RIS) is only by certified parties.

Technical solutions for mitigating security threats caused by health professionals in clinical settings.

PubMed

Fernandez-Aleman, Jose Luis; Belen Sanchez Garcia, Ana; Garcia-Mateos, Gines; Toval, Ambrosio

2015-08-01

The objective of this paper is to present a brief description of technical solutions for health information system security threats caused by inadequate security and privacy practices in healthcare professionals. A literature search was carried out in ScienceDirect, ACM Digital Library and IEEE Digital Library to find papers reporting technical solutions for certain security problems in information systems used in clinical settings. A total of 17 technical solutions were identified: measures for password security, the secure use of e-mail, the Internet, portable storage devices, printers and screens. Although technical safeguards are essential to the security of healthcare organization's information systems, good training, awareness programs and adopting a proper information security policy are particularly important to prevent insiders from causing security incidents.

Moving Digital Libraries into the Student Learning Space: The GetSmart Experience

ERIC Educational Resources Information Center

Marshall, Byron B.; Chen, Hsinchun; Shen, Rao; Fox, Edward A.

2006-01-01

The GetSmart system was built to support theoretically sound learning processes in a digital library environment by integrating course management, digital library, and concept mapping components to support a constructivist, six-step, information search process. In the fall of 2002 more than 100 students created 1400 concept maps as part of…

Examining Digital Literacy Competences and Learning Habits of Open and Distance Learners

ERIC Educational Resources Information Center

Ozdamar-Keskin, Nilgun; Ozata, Fatma Zeynep; Banar, Kerim; Royle, Karl

2015-01-01

The purpose of the study is to examine digital literacy competences and learning habits of learners enrolled in the open and distance education system of Anadolu University in Turkey. Data were gathered from 20.172 open and distance learners through a survey which included four parts: demographic information, abilities to use digital technologies,…

Theoretical Limits of Lunar Vision Aided Navigation with Inertial Navigation System

DTIC Science & Technology

2015-03-26

camera model. Light reflected or projected from objects in the scene of the outside world is taken in by the aperture (or opening) shaped as a double...model’s analog aspects with an analog-to-digital interface converting raw images of the outside world scene into digital information a computer can use to...Figure 2.7. Digital Image Coordinate System. Used with permission [30]. Angular Field of View. The angular field of view is the angle of the world scene

Systems and methods for automatically identifying and linking names in digital resources

DOEpatents

Parker, Charles T.; Lyons, Catherine M.; Roston, Gerald P.; Garrity, George M.

2017-06-06

The present invention provides systems and methods for automatically identifying name-like-strings in digital resources, matching these name-like-string against a set of names held in an expertly curated database, and for those name-like-strings found in said database, enhancing the content by associating additional matter with the name, wherein said matter includes information about the names that is held within said database and pointers to other digital resources which include the same name and it synonyms.

Apollo experience report: Guidance and control systems - Digital autopilot design development

NASA Technical Reports Server (NTRS)

Peters, W. H.; Cox, K. J.

1973-01-01

The development of the Apollo digital autopilots (the primary attitude control systems that were used for all phases of the lunar landing mission) is summarized. This report includes design requirements, design constraints, and design philosophy. The development-process functions and the essential information flow paths are identified. Specific problem areas that existed during the development are included. A discussion is also presented on the benefits inherent in mechanizing attitude-controller logic and dynamic compensation in a digital computer.

Plans for wind energy system simulation

NASA Technical Reports Server (NTRS)

Dreier, M. E.

1978-01-01

A digital computer code and a special purpose hybrid computer, were introduced. The digital computer program, the Root Perturbation Method or RPM, is an implementation of the classic floquet procedure which circumvents numerical problems associated with the extraction of Floquet roots. The hybrid computer, the Wind Energy System Time domain simulator (WEST), yields real time loads and deformation information essential to design and system stability investigations.

Research on digital city geographic information common services platform

NASA Astrophysics Data System (ADS)

Chen, Dequan; Wu, Qunyong; Wang, Qinmin

2008-10-01

Traditional GIS (Geographic Information System) software development mode exposes many defects that will largely slow down the city informational progress. It is urgent need to build a common application infrastructure for informational project to speed up the development pace of digital city. The advent of service-oriented architecture (SOA) has motivated the adoption of GIS functionality portals that can be executed in distributed computing environment. According to the SOA principle, we bring forward and design a digital city geographic information common services platform which provides application development service interfaces for field users that can be further extended relevant business application. In the end, a public-oriented Web GIS is developed based on the platform for helping public users to query geographic information in their daily life. It indicates that our platform have the capacity that can be integrated by other applications conveniently.

49 CFR 38.121 - Public information system.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false Public information system. 38.121 Section 38.121 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY... recorded or digitized human speech messages, to announce stations and provide other passenger information...

Personalized Recommender System for Digital Libraries

ERIC Educational Resources Information Center

Omisore, M. O.; Samuel, O. W.

2014-01-01

The huge amount of information available online has given rise to personalization and filtering systems. Recommender systems (RS) constitute a specific type of information filtering technique that present items according to user's interests. In this research, a web-based personalized recommender system capable of providing learners with books that…

77 FR 56212 - Federal Acquisition Regulation; Information Collection; Use of Data Universal Numbering System...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

...; Information Collection; Use of Data Universal Numbering System (DUNS) as Primary Contractor Identification... Numbering System (DUNS) as primary contractor identification. The DUNS number is the nine-digit... System (DUNS) as Primary Contractor Identification, by any of the following methods: Regulations.gov...

Measurement of sound absorption in the air. [data procesing

NASA Technical Reports Server (NTRS)

Meredith, R.; Badavi, F.; Becher, J.

1981-01-01

The large temperature gradient in each section of the resonance tube resulting from the liquid nitrogen coolant necessitated a design modification to the cooling system. A timer and four solenoid valves were installed so that the coolant flow can be reversed periodically. The hardware and software for controlling the analog to digital converter and conversion rate were completed, and the system is operational. A duty cycle control circit was implemented so that on the sixteenth conversion a relay shuts off the vibration exciter used to generate the sound wave. Thus the starting point of each decay curve is exactly known. This information is necessary for evaluating the g digital decay information. The data acquisition and digital decay evaluation programs are described.

Selected papers in the applied computer sciences 1992

USGS Publications Warehouse

Wiltshire, Denise A.

1992-01-01

This compilation of short papers reports on technical advances in the applied computer sciences. The papers describe computer applications in support of earth science investigations and research. This is the third volume in the series "Selected Papers in the Applied Computer Sciences." Listed below are the topics addressed in the compilation:Integration of geographic information systems and expert systems for resource management,Visualization of topography using digital image processing,Development of a ground-water data base for the southeastern Uited States using a geographic information system,Integration and aggregation of stream-drainage data using a geographic information system,Procedures used in production of digital geologic coverage using compact disc read-only memory (CD-ROM) technology, andAutomated methods for producing a technical publication on estimated water use in the United States.

[Development of a medical equipment support information system based on PDF portable document].

PubMed

Cheng, Jiangbo; Wang, Weidong

2010-07-01

According to the organizational structure and management system of the hospital medical engineering support, integrate medical engineering support workflow to ensure the medical engineering data effectively, accurately and comprehensively collected and kept in electronic archives. Analyse workflow of the medical, equipment support work and record all work processes by the portable electronic document. Using XML middleware technology and SQL Server database, complete process management, data calculation, submission, storage and other functions. The practical application shows that the medical equipment support information system optimizes the existing work process, standardized and digital, automatic and efficient orderly and controllable. The medical equipment support information system based on portable electronic document can effectively optimize and improve hospital medical engineering support work, improve performance, reduce costs, and provide full and accurate digital data

Measuring Practicing Clinicians' Information Literacy. An Exploratory Analysis in the Context of Panel Management.

PubMed

Dixon, Brian E; Barboza, Katherine; Jensen, Ashley E; Bennett, Katelyn J; Sherman, Scott E; Schwartz, Mark D

2017-02-15

As healthcare moves towards technology-driven population health management, clinicians must adopt complex digital platforms to access health information and document care. This study explored information literacy, a set of skills required to effectively navigate population health information systems, among primary care providers in one Veterans' Affairs (VA) medical center. Information literacy was assessed during an 8-month randomized trial that tested a population health (panel) management intervention. Providers were asked about their use and comfort with two VA digital tools for panel management at baseline, 16 weeks, and post-intervention. An 8-item scale (range 0-40) was used to measure information literacy (Cronbach's α=0.84). Scores between study arms and provider types were compared using paired t-tests and ANOVAs. Associations between self-reported digital tool use and information literacy were measured via Pearson's correlations. Providers showed moderate levels of information literacy (M= 27.4, SD 6.5). There were no significant differences in mean information literacy between physicians (M=26.4, SD 6.7) and nurses (M=30.5, SD 5.2, p=0.57 for difference), or between intervention (M=28.4, SD 6.5) and control groups (M=25.1, SD 6.2, p=0.12 for difference). Information literacy was correlated with higher rates of self-reported information system usage (r=0.547, p=0.001). Clinicians identified data access, accuracy, and interpretability as potential information literacy barriers. While exploratory in nature, cautioning generalizability, the study suggests that measuring and improving clinicians' information literacy may play a significant role in the implementation and use of digital information tools, as these tools are rapidly being deployed to enhance communication among care teams, improve health care outcomes, and reduce overall costs.

Measuring Practicing Clinicians’ Information Literacy

PubMed Central

Barboza, Katherine; Jensen, Ashley E.; Bennett, Katelyn J.; Sherman, Scott E.; Schwartz, Mark D.

2017-01-01

Summary Background As healthcare moves towards technology-driven population health management, clinicians must adopt complex digital platforms to access health information and document care. Objectives This study explored information literacy, a set of skills required to effectively navigate population health information systems, among primary care providers in one Veterans’ Affairs (VA) medical center. Methods Information literacy was assessed during an 8-month randomized trial that tested a population health (panel) management intervention. Providers were asked about their use and comfort with two VA digital tools for panel management at baseline, 16 weeks, and post-intervention. An 8-item scale (range 0-40) was used to measure information literacy (Cronbach’s a=0.84). Scores between study arms and provider types were compared using paired t-tests and ANOVAs. Associations between self-reported digital tool use and information literacy were measured via Pearson’s correlations. Results Providers showed moderate levels of information literacy (M= 27.4, SD 6.5). There were no significant differences in mean information literacy between physicians (M=26.4, SD 6.7) and nurses (M=30.5, SD 5.2, p=0.57 for difference), or between intervention (M=28.4, SD 6.5) and control groups (M=25.1, SD 6.2, p=0.12 for difference). Information literacy was correlated with higher rates of self-reported information system usage (r=0.547, p=0.001). Clinicians identified data access, accuracy, and interpretability as potential information literacy barriers. Conclusions While exploratory in nature, cautioning generalizability, the study suggests that measuring and improving clinicians’ information literacy may play a significant role in the implementation and use of digital information tools, as these tools are rapidly being deployed to enhance communication among care teams, improve health care outcomes, and reduce overall costs. PMID:28197620

Proceedings of the International Association for Development of the Information Society (IADIS) International Conference on Cognition and Exploratory Learning in the Digital Age (CELDA) (11th, Porto, Portugal, October 25-27, 2014)

ERIC Educational Resources Information Center

Sampson, Demetrios G., Ed.; Spector, J. Michael, Ed.; Ifenthaler, Dirk, Ed.; Isaias, Pedro, Ed.

2014-01-01

These proceedings contain the papers of the 11th International Conference on Cognition and Exploratory Learning in the Digital Age (CELDA 2014), October 25-27, 2014, which has been organized by the International Association for Development of the Information Society (IADIS) and endorsed by the Japanese Society for Information and Systems in…

The Significance of Digital Pedagogy: Teachers' Perceptions and the Factors Influencing Their Abilities as Digital Pedagogues

ERIC Educational Resources Information Center

Wadmany, Rivka; Kliachko, Sarah

2014-01-01

Information and Communication Technologies have brought widespread changes in all aspects of contemporary society and culture. Most scholars believe that the assimilation of processes of change in schools and the entire Educational system depends on the abilities and perceptions of teachers in the system. The present study examines how Graduates…

Incorporating clinical metadata with digital image features for automated identification of cutaneous melanoma.

PubMed

Liu, Z; Sun, J; Smith, M; Smith, L; Warr, R

2013-11-01

Computer-assisted diagnosis (CAD) of malignant melanoma (MM) has been advocated to help clinicians to achieve a more objective and reliable assessment. However, conventional CAD systems examine only the features extracted from digital photographs of lesions. Failure to incorporate patients' personal information constrains the applicability in clinical settings. To develop a new CAD system to improve the performance of automatic diagnosis of melanoma, which, for the first time, incorporates digital features of lesions with important patient metadata into a learning process. Thirty-two features were extracted from digital photographs to characterize skin lesions. Patients' personal information, such as age, gender and, lesion site, and their combinations, was quantified as metadata. The integration of digital features and metadata was realized through an extended Laplacian eigenmap, a dimensionality-reduction method grouping lesions with similar digital features and metadata into the same classes. The diagnosis reached 82.1% sensitivity and 86.1% specificity when only multidimensional digital features were used, but improved to 95.2% sensitivity and 91.0% specificity after metadata were incorporated appropriately. The proposed system achieves a level of sensitivity comparable with experienced dermatologists aided by conventional dermoscopes. This demonstrates the potential of our method for assisting clinicians in diagnosing melanoma, and the benefit it could provide to patients and hospitals by greatly reducing unnecessary excisions of benign naevi. This paper proposes an enhanced CAD system incorporating clinical metadata into the learning process for automatic classification of melanoma. Results demonstrate that the additional metadata and the mechanism to incorporate them are useful for improving CAD of melanoma. © 2013 British Association of Dermatologists.

Digital interface of electronic transformers based on embedded system

NASA Astrophysics Data System (ADS)

Shang, Qiufeng; Qi, Yincheng

2008-10-01

Benefited from digital interface of electronic transformers, information sharing and system integration in substation can be realized. An embedded system-based digital output scheme of electronic transformers is proposed. The digital interface is designed with S3C44B0X 32bit RISC microprocessor as the hardware platform. The μCLinux operation system (OS) is transplanted on ARM7 (S3C44B0X). Applying Ethernet technology as the communication mode in the substation automation system is a new trend. The network interface chip RTL8019AS is adopted. Data transmission is realized through the in-line TCP/IP protocol of uClinux embedded OS. The application result and character analysis show that the design can meet the real-time and reliability requirements of IEC60044-7/8 electronic voltage/current instrument transformer standards.

Digital Data Set of Orchards Where Arsenical Pesticides Were Likely Used in Clarke and Frederick Counties, Virginia, and Berkeley and Jefferson Counties, West Virginia

USGS Publications Warehouse

Reed, Bradley W.; Larkins, Peter; Robinson, Gilpin R.

2006-01-01

This Fact Sheet provides information on a digital data set that identifies orchard areas under cultivation between the 1920s and 1960s in Clarke and Frederick Counties, Virginia and Berkeley and Jefferson Counties, West Virginia. The apple orchards in these areas likely used arsenical pesticides during this time. The digital data set can be used in a geographic information system (GIS) to identify where elevated arsenic and lead concentrations may be present in soils. The digital data set, the associated metadata, and the related files are available on the World Wide Web at http://pubs.usgs.gov/of/2006/1330/shapefile/.

Digital Libraries and the Problem of Purpose [and] On DigiPaper and the Dissemination of Electronic Documents [and] DFAS: The Distributed Finding Aid Search System [and] Best Practices for Digital Archiving: An Information Life Cycle Approach [and] Mapping and Converting Essential Federal Geographic Data Committee (FGDC) Metadata into MARC21 and Dublin Core: Towards an Alternative to the FGDC Clearinghouse [and] Evaluating Website Modifications at the National Library of Medicine through Search Log analysis.

ERIC Educational Resources Information Center

Levy, David M.; Huttenlocher, Dan; Moll, Angela; Smith, MacKenzie; Hodge, Gail M.; Chandler, Adam; Foley, Dan; Hafez, Alaaeldin M.; Redalen, Aaron; Miller, Naomi

2000-01-01

Includes six articles focusing on the purpose of digital public libraries; encoding electronic documents through compression techniques; a distributed finding aid server; digital archiving practices in the framework of information life cycle management; converting metadata into MARC format and Dublin Core formats; and evaluating Web sites through…

[Information, knowledge and healthcare practice: professionals participation as the key element of the gear].

PubMed

Adam, Paula; Permanyer-Miralda, Gaietà; Solà-Morales, Oriol; Canela-Soler, Jaume

2010-02-01

This article analyzes the role of ICT within the complicated gear between information, knowledge and healthcare practices, which particular focus on two specific cases: the digitalization process of the healthcare system and the application of knowledge into the healthcare practices. In both cases, international and local experiences suggest, and sometimes demonstrate the importance of the participation, capacity-building and empowerment of healthcare practitioners for the generation, transfer and use of information and knowledge empowered by the digital tools which should bring into the system better performance, more efficacy, efficiency, equity, equality, security, quality. 2010 Elsevier España S.L. All rights reserved.

[Chairman's introductory remarks].

PubMed

Shimo, Masamune

2013-01-01

Remote medicine, as well as the technological development of IT, has been realized in various fields of medical care. Reports have been published of the actual utilization of a system of remote diagnosis by infectious disease surveillance in each region of Nagano Prefecture, a telepathology system in Nagano, operation case of a radiological image remote diagnosis. Situation in the lack of pathologists and radiologists, that changes in the way of working of the physician, or medical information digitized convey how the doctor involved in the diagnosis, any diagnosis based on the information that was received doctor such as whether to perform, various issues have been raised. Soot digitization of information.

High speed television camera system processes photographic film data for digital computer analysis

NASA Technical Reports Server (NTRS)

Habbal, N. A.

1970-01-01

Data acquisition system translates and processes graphical information recorded on high speed photographic film. It automatically scans the film and stores the information with a minimal use of the computer memory.

Comprehensive Digital Imaging Network Project At Georgetown University Hospital

NASA Astrophysics Data System (ADS)

Mun, Seong K.; Stauffer, Douglas; Zeman, Robert; Benson, Harold; Wang, Paul; Allman, Robert

1987-10-01

The radiology practice is going through rapid changes due to the introduction of state-of-the-art computed based technologies. For the last twenty years we have witnessed the introduction of many new medical diagnostic imaging systems such as x-ray computed tomo-graphy, digital subtraction angiography (DSA), computerized nuclear medicine, single pho-ton emission computed tomography (SPECT), positron emission tomography (PET) and more re-cently, computerized digital radiography and nuclear magnetic resonance imaging (MRI). Other than the imaging systems, there has been a steady introduction of computed based information systems for radiology departments and hospitals.

The Virtual Naval Hospital: the digital library as knowledge management tool for nomadic patrons*

PubMed Central

D'Alessandro, Michael P.; D'Alessandro, Donna M.; Bakalar, Richard S.; Ashley, Denis E.; Hendrix, Mary J. C.

2005-01-01

Objective: To meet the information needs of isolated primary care providers and their patients in the US Navy, a digital health sciences library, the Virtual Naval Hospital, was created through a unique partnership between academia and government. Methods: The creation of the digital library was heavily influenced by the principles of user-centered design and made allowances for the nomadic nature of the digital library's patrons and the heterogeneous access they have to Internet bandwidth. Results: The result is a digital library that has been in operation since 1997, continues to expand in size, is heavily used, and is highly regarded by its patrons. Conclusions: The digital library is dedicated to delivering the right information at the right time to the right person so the right decision can be made, and therefore the Virtual Naval Hospital functions as a knowledge-management system for the US Navy Bureau of Medicine and Surgery. PMID:15685269

The Virtual Naval Hospital: the digital library as knowledge management tool for nomadic patrons.

PubMed

D'Alessandro, Michael P; D'Alessandro, Donna M; Bakalar, Richard S; Ashley, Denis E; Hendrix, Mary J C

2005-01-01

To meet the information needs of isolated primary care providers and their patients in the US Navy, a digital health sciences library, the Virtual Naval Hospital, was created through a unique partnership between academia and government. The creation of the digital library was heavily influenced by the principles of user-centered design and made allowances for the nomadic nature of the digital library's patrons and the heterogeneous access they have to Internet bandwidth. The result is a digital library that has been in operation since 1997, continues to expand in size, is heavily used, and is highly regarded by its patrons. The digital library is dedicated to delivering the right information at the right time to the right person so the right decision can be made, and therefore the Virtual Naval Hospital functions as a knowledge-management system for the US Navy Bureau of Medicine and Surgery.

Low-cost Landsat digital processing system for state and local information systems

NASA Technical Reports Server (NTRS)

Hooper, N. J.; Spann, G. W.; Faust, N. L.; Paludan, C. T. N.

1979-01-01

The paper details a minicomputer-based system which is well within the budget of many state, regional, and local agencies that previously could not afford digital processing capability. In order to achieve this goal a workable small-scale Landsat system is examined to provide low-cost automated processing. It is anticipated that the alternative systems will be based on a single minicomputer, but that the peripherals will vary depending on the capability emphasized in a particular system.

To zoom or not to zoom: do we have enough pixels?

NASA Astrophysics Data System (ADS)

Youngworth, Richard N.; Herman, Eric

2015-09-01

Common lexicon in imaging systems includes the frequently used term digital zoom. Of course this term is somewhat of a misnomer as there is no actual zooming in such systems. Instead, digital zoom describes the zoom effect that comes with an image rewriting or reprinting that perhaps can be more accurately described as cropping and enlarging an image (a pixel remapping) for viewing. If done properly, users of the overall hybrid digital-optical system do not know the methodology employed. Hence the essential question, pondered and manipulated since the advent of mature digital image science, really becomes "do we have enough pixels to avoid optical zoom." This paper discusses known imaging factors for hybrid digital-optical systems, most notably resolution considerations. The paper is fundamentally about communication, and thereby includes information useful to the greater consumer, technical, and business community who all have an interest in understanding the key technical details that have driven the amazing technology and development of zoom systems.

A HUMAN FACTORS ENGINEERING PROCESS TO SUPPORT HUMAN-SYSTEM INTERFACE DESIGN IN CONTROL ROOM MODERNIZATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kovesdi, C.; Joe, J.; Boring, R.

The primary objective of the United States (U.S.) Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program is to sustain operation of the existing commercial nuclear power plants (NPPs) through a multi-pathway approach in conducting research and development (R&D). The Advanced Instrumentation, Information, and Control (II&C) System Technologies pathway conducts targeted R&D to address aging and reliability concerns with legacy instrumentation and control (I&C) and other information systems in existing U.S. NPPs. Control room modernization is an important part following this pathway, and human factors experts at Idaho National Laboratory (INL) have been involved in conducting R&D to supportmore » migration of new digital main control room (MCR) technologies from legacy analog and legacy digital I&C. This paper describes a human factors engineering (HFE) process that supports human-system interface (HSI) design in MCR modernization activities, particularly with migration of old digital to new digital I&C. The process described in this work is an expansion from the LWRS Report INL/EXT-16-38576, and is a requirements-driven approach that aligns with NUREG-0711 requirements. The work described builds upon the existing literature by adding more detail around key tasks and decisions to make when transitioning from HSI Design into Verification and Validation (V&V). The overall objective of this process is to inform HSI design and elicit specific, measurable, and achievable human factors criteria for new digital technologies. Upon following this process, utilities should have greater confidence with transitioning from HSI design into V&V.« less

Information Technology Industry 2004

DTIC Science & Technology

2004-01-01

American Chamber of Commerce – Japan Diet Member Mr. Taro Kono Sony Media World NTT DoCoMo Asia Technology Information Program Japan IT...lines by entering consumer electronic markets (plasma and LCD televisions, digital cameras, and digital music players, etc.) with higher profit...in “business to business” sales. BEA Systems and IBM lead sales in this software sub-market. Likewise, Nintendo and Sony continue to dominate the

36 CFR 1192.121 - Public information system.

Code of Federal Regulations, 2011 CFR

2011-07-01

... COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES... public address system permitting transportation system personnel, or recorded or digitized human speech...

49 CFR 38.35 - Public information system.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false Public information system. 38.35 Section 38.35 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY... a public address system permitting the driver, or recorded or digitized human speech messages, to...

Digital radiographic imaging: is the dental practice ready?

PubMed

Parks, Edwin T

2008-04-01

Digital radiographic imaging is slowly, but surely, replacing film-based imaging. It has many advantages over traditional imaging, but the technology also has some drawbacks. The author presents an overview of the types of digital image receptors available, image enhancement software and the range of costs for the new technology. PRACTICE IMPLICATIONS. The expenses associated with converting to digital radiographic imaging are considerable. The purpose of this article is to provide the clinician with an overview of digital radiographic imaging technology so that he or she can be an informed consumer when evaluating the numerous digital systems in the marketplace.

State of the art and trends for digital pathology.

PubMed

García Rojo, Marcial

2012-01-01

Anatomic pathology is a medical specialty where both information management systems and digital images systems paly a most important role. Digital pathology is a new concept that considers all uses of this information, including diagnosis, biomedical research and education. Virtual microscopy or whole slide imaging, resulting in digital slides, is an outreaching technology in anatomic pathology. Limiting factors in the expansion of virtual microscopy are formidable storage dimension, scanning speed, quality of image and cultural change. Anatomic pathology data and images should be an important part of the patient electronic health records as well as of clinical data warehouse, epidemiological or biomedical research databases, and platforms dedicated to translational medicine. Integrating anatomic pathology to the "healthcare enterprise" can only be achieved using existing and emerging medical informatics standards like Digital Imaging and Communications in Medicine (DICOM®¹), Health Level Seven (HL7®), and Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT®), following the recommendations of Integrating the Healthcare Enterprise (IHE®). The consequences of the full digitalization of pathology departments are hard to foresee, but short term issues have arisen that imply interesting challenges for health care standards bodies.

Access Control based on Attribute Certificates for Medical Intranet Applications

PubMed Central

Georgiadis, Christos; Pangalos, George; Khair, Marie

2001-01-01

Background Clinical information systems frequently use intranet and Internet technologies. However these technologies have emphasized sharing and not security, despite the sensitive and private nature of much health information. Digital certificates (electronic documents which recognize an entity or its attributes) can be used to control access in clinical intranet applications. Objectives To outline the need for access control in distributed clinical database systems, to describe the use of digital certificates and security policies, and to propose the architecture for a system using digital certificates, cryptography and security policy to control access to clinical intranet applications. Methods We have previously developed a security policy, DIMEDAC (Distributed Medical Database Access Control), which is compatible with emerging public key and privilege management infrastructure. In our implementation approach we propose the use of digital certificates, to be used in conjunction with DIMEDAC. Results Our proposed access control system consists of two phases: the ways users gain their security credentials; and how these credentials are used to access medical data. Three types of digital certificates are used: identity certificates for authentication; attribute certificates for authorization; and access-rule certificates for propagation of access control policy. Once a user is identified and authenticated, subsequent access decisions are based on a combination of identity and attribute certificates, with access-rule certificates providing the policy framework. Conclusions Access control in clinical intranet applications can be successfully and securely managed through the use of digital certificates and the DIMEDAC security policy. PMID:11720951

NMCS Information Processing System 360 Formatted File System (NIPS 360 FFS). Users Manual. Volume 1. Introduction to File Concepts

DTIC Science & Technology

1978-09-01

input source language (other than ?S). Used in double form, negates an FFT spcification for a subroutine. / (Slash) Used to separate numeric digits (V-l...1) represents the digits 1-999 and also digits followed by a letter, e.g., LINE1OA ’. Th, E311owing name prefiKes are not allowed: PSSQ, VSEr, VSZ...b ZERO OUT 6 LA 6,12 (6) ADD 12 TO 6 PUT IN REG b 4’MOVF INPUT DATE rC WORK APEA, REFORMAT DD AND YY 0C)NVERr TWO DIGIT MONTH TO SYMBOLIC THREE

Risk-Informed Safety Assurance and Probabilistic Assessment of Mission-Critical Software-Intensive Systems

NASA Technical Reports Server (NTRS)

Guarro, Sergio B.

2010-01-01

This report validates and documents the detailed features and practical application of the framework for software intensive digital systems risk assessment and risk-informed safety assurance presented in the NASA PRA Procedures Guide for Managers and Practitioner. This framework, called herein the "Context-based Software Risk Model" (CSRM), enables the assessment of the contribution of software and software-intensive digital systems to overall system risk, in a manner which is entirely compatible and integrated with the format of a "standard" Probabilistic Risk Assessment (PRA), as currently documented and applied for NASA missions and applications. The CSRM also provides a risk-informed path and criteria for conducting organized and systematic digital system and software testing so that, within this risk-informed paradigm, the achievement of a quantitatively defined level of safety and mission success assurance may be targeted and demonstrated. The framework is based on the concept of context-dependent software risk scenarios and on the modeling of such scenarios via the use of traditional PRA techniques - i.e., event trees and fault trees - in combination with more advanced modeling devices such as the Dynamic Flowgraph Methodology (DFM) or other dynamic logic-modeling representations. The scenarios can be synthesized and quantified in a conditional logic and probabilistic formulation. The application of the CSRM method documented in this report refers to the MiniAERCam system designed and developed by the NASA Johnson Space Center.

Consequences of "going digital" for pathology professionals - entering the cloud.

PubMed

Laurinavicius, Arvydas; Raslavicus, Paul

2012-01-01

New opportunities and the adoption of digital technologies will transform the way pathology professionals and services work. Many areas of our daily life as well as medical professions have experienced this change already which has resulted in a paradigm shift in many activities. Pathology is an image-based discipline, therefore, arrival of digital imaging into this domain promises major shift in our work and required mentality. Recognizing the physical and digital duality of the pathology workflow, we can prepare for the imminent increase of the digital component, synergize and enjoy its benefits. Development of a new generation of laboratory information systems along with seamless integration of digital imaging, decision-support, and knowledge databases will enable pathologists to work in a distributed environment. The paradigm of "cloud pathology" is proposed as an ultimate vision of digital pathology workstations plugged into the integrated multidisciplinary patient care systems.

System design and implementation of digital-image processing using computational grids

NASA Astrophysics Data System (ADS)

Shen, Zhanfeng; Luo, Jiancheng; Zhou, Chenghu; Huang, Guangyu; Ma, Weifeng; Ming, Dongping

2005-06-01

As a special type of digital image, remotely sensed images are playing increasingly important roles in our daily lives. Because of the enormous amounts of data involved, and the difficulties of data processing and transfer, an important issue for current computer and geo-science experts is developing internet technology to implement rapid remotely sensed image processing. Computational grids are able to solve this problem effectively. These networks of computer workstations enable the sharing of data and resources, and are used by computer experts to solve imbalances of network resources and lopsided usage. In China, computational grids combined with spatial-information-processing technology have formed a new technology: namely, spatial-information grids. In the field of remotely sensed images, spatial-information grids work more effectively for network computing, data processing, resource sharing, task cooperation and so on. This paper focuses mainly on the application of computational grids to digital-image processing. Firstly, we describe the architecture of digital-image processing on the basis of computational grids, its implementation is then discussed in detail with respect to the technology of middleware. The whole network-based intelligent image-processing system is evaluated on the basis of the experimental analysis of remotely sensed image-processing tasks; the results confirm the feasibility of the application of computational grids to digital-image processing.

Digital information management: a progress report on the National Digital Mammography Archive

NASA Astrophysics Data System (ADS)

Beckerman, Barbara G.; Schnall, Mitchell D.

2002-05-01

Digital mammography creates very large images, which require new approaches to storage, retrieval, management, and security. The National Digital Mammography Archive (NDMA) project, funded by the National Library of Medicine (NLM), is developing a limited testbed that demonstrates the feasibility of a national breast imaging archive, with access to prior exams; patient information; computer aids for image processing, teaching, and testing tools; and security components to ensure confidentiality of patient information. There will be significant benefits to patients and clinicians in terms of accessible data with which to make a diagnosis and to researchers performing studies on breast cancer. Mammography was chosen for the project, because standards were already available for digital images, report formats, and structures. New standards have been created for communications protocols between devices, front- end portal and archive. NDMA is a distributed computing concept that provides for sharing and access across corporate entities. Privacy, auditing, and patient consent are all integrated into the system. Five sites, Universities of Pennsylvania, Chicago, North Carolina and Toronto, and BWXT Y12, are connected through high-speed networks to demonstrate functionality. We will review progress, including technical challenges, innovative research and development activities, standards and protocols being implemented, and potential benefits to healthcare systems.

Error Correcting Codes I. Applications of Elementary Algebra to Information Theory. Modules and Monographs in Undergraduate Mathematics and Its Applications Project. UMAP Unit 346.

ERIC Educational Resources Information Center

Rice, Bart F.; Wilde, Carroll O.

It is noted that with the prominence of computers in today's technological society, digital communication systems have become widely used in a variety of applications. Some of the problems that arise in digital communications systems are described. This unit presents the problem of correcting errors in such systems. Error correcting codes are…

Specification and preliminary design of the CARTA system for satellite cartography

NASA Technical Reports Server (NTRS)

Machadoesilva, A. J. F. (Principal Investigator); Neto, G. C.; Serra, P. R. M.; Souza, R. C. M.; Mitsuo, Fernando Augusta, II

1984-01-01

Digital imagery acquired by satellite have inherent geometrical distortion due to sensor characteristics and to platform variations. In INPE a software system for geometric correction of LANDSAT MSS imagery is under development. Such connected imagery will be useful for map generation. Important examples are the generation of LANDSAT image-charts for the Amazon region and the possibility of integrating digital satellite imagery into a Geographic Information System.

Development of flood routing simulation system of digital Qingjiang based on integrated spatial information technology

NASA Astrophysics Data System (ADS)

Yuan, Yanbin; Zhou, You; Zhu, Yaqiong; Yuan, Xiaohui; Sælthun, N. R.

2007-11-01

Based on digital technology, flood routing simulation system development is an important component of "digital catchment". Taking QingJiang catchment as a pilot case, in-depth analysis on informatization of Qingjiang catchment management being the basis, aiming at catchment data's multi-source, - dimension, -element, -subject, -layer and -class feature, the study brings the design thought and method of "subject-point-source database" (SPSD) to design system structure in order to realize the unified management of catchments data in great quantity. Using the thought of integrated spatial information technology for reference, integrating hierarchical structure development model of digital catchment is established. The model is general framework of the flood routing simulation system analysis, design and realization. In order to satisfy the demands of flood routing three-dimensional simulation system, the object-oriented spatial data model are designed. We can analyze space-time self-adapting relation between flood routing and catchments topography, express grid data of terrain by using non-directed graph, apply breadth first search arithmetic, set up search method for the purpose of dynamically searching stream channel on the basis of simulated three-dimensional terrain. The system prototype is therefore realized. Simulation results have demonstrated that the proposed approach is feasible and effective in the application.

Geospatial Information from Satellite Imagery for Geovisualisation of Smart Cities in India

NASA Astrophysics Data System (ADS)

Mohan, M.

2016-06-01

In the recent past, there have been large emphasis on extraction of geospatial information from satellite imagery. The Geospatial information are being processed through geospatial technologies which are playing important roles in developing of smart cities, particularly in developing countries of the world like India. The study is based on the latest geospatial satellite imagery available for the multi-date, multi-stage, multi-sensor, and multi-resolution. In addition to this, the latest geospatial technologies have been used for digital image processing of remote sensing satellite imagery and the latest geographic information systems as 3-D GeoVisualisation, geospatial digital mapping and geospatial analysis for developing of smart cities in India. The Geospatial information obtained from RS and GPS systems have complex structure involving space, time and presentation. Such information helps in 3-Dimensional digital modelling for smart cities which involves of spatial and non-spatial information integration for geographic visualisation of smart cites in context to the real world. In other words, the geospatial database provides platform for the information visualisation which is also known as geovisualisation. So, as a result there have been an increasing research interest which are being directed to geospatial analysis, digital mapping, geovisualisation, monitoring and developing of smart cities using geospatial technologies. However, the present research has made an attempt for development of cities in real world scenario particulary to help local, regional and state level planners and policy makers to better understand and address issues attributed to cities using the geospatial information from satellite imagery for geovisualisation of Smart Cities in emerging and developing country, India.

3D interactive augmented reality-enhanced digital learning systems for mobile devices

NASA Astrophysics Data System (ADS)

Feng, Kai-Ten; Tseng, Po-Hsuan; Chiu, Pei-Shuan; Yang, Jia-Lin; Chiu, Chun-Jie

2013-03-01

With enhanced processing capability of mobile platforms, augmented reality (AR) has been considered a promising technology for achieving enhanced user experiences (UX). Augmented reality is to impose virtual information, e.g., videos and images, onto a live-view digital display. UX on real-world environment via the display can be e ectively enhanced with the adoption of interactive AR technology. Enhancement on UX can be bene cial for digital learning systems. There are existing research works based on AR targeting for the design of e-learning systems. However, none of these work focuses on providing three-dimensional (3-D) object modeling for en- hanced UX based on interactive AR techniques. In this paper, the 3-D interactive augmented reality-enhanced learning (IARL) systems will be proposed to provide enhanced UX for digital learning. The proposed IARL systems consist of two major components, including the markerless pattern recognition (MPR) for 3-D models and velocity-based object tracking (VOT) algorithms. Realistic implementation of proposed IARL system is conducted on Android-based mobile platforms. UX on digital learning can be greatly improved with the adoption of proposed IARL systems.

Digital mining claim density map for federal lands in Idaho: 1996

USGS Publications Warehouse

Hyndman, Paul C.; Campbell, Harry W.

1999-01-01

This report describes a digital map generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim density information for federal lands in Idaho as of March 1997. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. There is no paper map included in this Open-File report. In accordance with the Federal Land Policy and Management Act of 1976 (FLPMA), all unpatented mining claims, mill and tunnel sites must be recorded at the appropriate Bureau of Land Management (BLM) State office. BLM maintains a cumulative computer listing of mining claims in the Mining Claim Recordation System (MCRS) database with locations given by meridian, township, range, and section. A mining claim is considered closed when the claim is relinquished or a formal BLM decision declaring the mining claim null and void has been issued and the appeal period has expired. All other mining claims filed with BLM are considered to be open and actively held. The digital map (figure 1.) with the mining claim density database available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller.

Digital mining claim density map for federal lands in Oregon: 1996

USGS Publications Warehouse

Hyndman, Paul C.; Campbell, Harry W.

1999-01-01

This report describes a digital map generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim density information for federal lands in Oregon as of March 1997. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. There is no paper map included in this Open-File report. In accordance with the Federal Land Policy and Management Act of 1976 (FLPMA), all unpatented mining claims, mill and tunnel sites must be recorded at the appropriate Bureau of Land Management (BLM) State office. BLM maintains a cumulative computer listing of mining claims in the Mining Claim Recordation System (MCRS) database with locations given by meridian, township, range, and section. A mining claim is considered closed when the claim is relinquished or a formal BLM decision declaring the mining claim null and void has been issued and the appeal period has expired. All other mining claims filed with BLM are considered to be open and actively held. The digital map (figure 1.) with the mining claim density database available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller.

A Design Study Investigating Augmented Reality and Photograph Annotation in a Digitalized Grossing Workstation

PubMed Central

Chow, Joyce A.; Törnros, Martin E.; Waltersson, Marie; Richard, Helen; Kusoffsky, Madeleine; Lundström, Claes F.; Kurti, Arianit

2017-01-01

Context: Within digital pathology, digitalization of the grossing procedure has been relatively underexplored in comparison to digitalization of pathology slides. Aims: Our investigation focuses on the interaction design of an augmented reality gross pathology workstation and refining the interface so that information and visualizations are easily recorded and displayed in a thoughtful view. Settings and Design: The work in this project occurred in two phases: the first phase focused on implementation of an augmented reality grossing workstation prototype while the second phase focused on the implementation of an incremental prototype in parallel with a deeper design study. Subjects and Methods: Our research institute focused on an experimental and “designerly” approach to create a digital gross pathology prototype as opposed to focusing on developing a system for immediate clinical deployment. Statistical Analysis Used: Evaluation has not been limited to user tests and interviews, but rather key insights were uncovered through design methods such as “rapid ethnography” and “conversation with materials”. Results: We developed an augmented reality enhanced digital grossing station prototype to assist pathology technicians in capturing data during examination. The prototype uses a magnetically tracked scalpel to annotate planned cuts and dimensions onto photographs taken of the work surface. This article focuses on the use of qualitative design methods to evaluate and refine the prototype. Our aims were to build on the strengths of the prototype's technology, improve the ergonomics of the digital/physical workstation by considering numerous alternative design directions, and to consider the effects of digitalization on personnel and the pathology diagnostics information flow from a wider perspective. A proposed interface design allows the pathology technician to place images in relation to its orientation, annotate directly on the image, and create linked information. Conclusions: The augmented reality magnetically tracked scalpel reduces tool switching though limitations in today's augmented reality technology fall short of creating an ideal immersive workflow by requiring the use of a monitor. While this technology catches up, we recommend focusing efforts on enabling the easy creation of layered, complex reports, linking, and viewing information across systems. Reflecting upon our results, we argue for digitalization to focus not only on how to record increasing amounts of data but also how these data can be accessed in a more thoughtful way that draws upon the expertise and creativity of pathology professionals using the systems. PMID:28966831

A Design Study Investigating Augmented Reality and Photograph Annotation in a Digitalized Grossing Workstation.

PubMed

Chow, Joyce A; Törnros, Martin E; Waltersson, Marie; Richard, Helen; Kusoffsky, Madeleine; Lundström, Claes F; Kurti, Arianit

2017-01-01

Within digital pathology, digitalization of the grossing procedure has been relatively underexplored in comparison to digitalization of pathology slides. Our investigation focuses on the interaction design of an augmented reality gross pathology workstation and refining the interface so that information and visualizations are easily recorded and displayed in a thoughtful view. The work in this project occurred in two phases: the first phase focused on implementation of an augmented reality grossing workstation prototype while the second phase focused on the implementation of an incremental prototype in parallel with a deeper design study. Our research institute focused on an experimental and "designerly" approach to create a digital gross pathology prototype as opposed to focusing on developing a system for immediate clinical deployment. Evaluation has not been limited to user tests and interviews, but rather key insights were uncovered through design methods such as " rapid ethnography " and " conversation with materials ". We developed an augmented reality enhanced digital grossing station prototype to assist pathology technicians in capturing data during examination. The prototype uses a magnetically tracked scalpel to annotate planned cuts and dimensions onto photographs taken of the work surface. This article focuses on the use of qualitative design methods to evaluate and refine the prototype. Our aims were to build on the strengths of the prototype's technology, improve the ergonomics of the digital/physical workstation by considering numerous alternative design directions, and to consider the effects of digitalization on personnel and the pathology diagnostics information flow from a wider perspective. A proposed interface design allows the pathology technician to place images in relation to its orientation, annotate directly on the image, and create linked information. The augmented reality magnetically tracked scalpel reduces tool switching though limitations in today's augmented reality technology fall short of creating an ideal immersive workflow by requiring the use of a monitor. While this technology catches up, we recommend focusing efforts on enabling the easy creation of layered, complex reports, linking, and viewing information across systems. Reflecting upon our results, we argue for digitalization to focus not only on how to record increasing amounts of data but also how these data can be accessed in a more thoughtful way that draws upon the expertise and creativity of pathology professionals using the systems.

A 3-D terrain visualization database for highway information management

DOT National Transportation Integrated Search

1999-07-26

A Multimedia based Highway Information System (MMHIS) is described in the paper to improve the existing photologging system for various operation and management needs. The full digital, computer based MMHIS uses technologies of video, multimedia data...

Development of a Watershed Boundary Dataset for Mississippi

USGS Publications Warehouse

Van Wilson, K.; Clair, Michael G.; Turnipseed, D. Phil; Rebich, Richard A.

2009-01-01

The U.S. Geological Survey, in cooperation with the Mississippi Department of Environmental Quality, U.S. Department of Agriculture-Natural Resources Conservation Service, Mississippi Department of Transportation, U.S. Department of Agriculture-Forest Service, and the Mississippi Automated Resource Information System, developed a 1:24,000-scale Watershed Boundary Dataset for Mississippi including watershed and subwatershed boundaries, codes, names, and drainage areas. The Watershed Boundary Dataset for Mississippi provides a standard geographical framework for water-resources and selected land-resources planning. The original 8-digit subbasins (hydrologic unit codes) were further subdivided into 10-digit watersheds and 12-digit subwatersheds - the exceptions are the Lower Mississippi River Alluvial Plain (known locally as the Delta) and the Mississippi River inside levees, which were only subdivided into 10-digit watersheds. Also, large water bodies in the Mississippi Sound along the coast were not delineated as small as a typical 12-digit subwatershed. All of the data - including watershed and subwatershed boundaries, hydrologic unit codes and names, and drainage-area data - are stored in a Geographic Information System database.

SPECIAL ISSUE ON OPTICAL PROCESSING OF INFORMATION: Analysis of the precision parameters of an optoelectronic vector-matrix processor of digital information

NASA Astrophysics Data System (ADS)

Odinokov, S. B.; Petrov, A. V.

1995-10-01

Mathematical models of components of a vector-matrix optoelectronic multiplier are considered. Perturbing factors influencing a real optoelectronic system — noise and errors of radiation sources and detectors, nonlinearity of an analogue—digital converter, nonideal optical systems — are taken into account. Analytic expressions are obtained for relating the precision of such a multiplier to the probability of an error amounting to one bit, to the parameters describing the quality of the multiplier components, and to the quality of the optical system of the processor. Various methods of increasing the dynamic range of a multiplier are considered at the technical systems level.

Simulation of Controller Pilot Data Link Communications over VHF Digital Link Mode 3

NASA Technical Reports Server (NTRS)

Bretmersky, Steven C.; Murawski, Robert; Nguyen, Thanh C.; Raghavan, Rajesh S.

2004-01-01

The Federal Aviation Administration (FAA) has established an operational plan for the future Air Traffic Management (ATM) system, in which the Controller Pilot Data Link Communications (CPDLC) is envisioned to evolve into digital messaging that will take on an ever increasing role in controller to pilot communications, significantly changing the way the National Airspace System (NAS) is operating. According to FAA, CPDLC represents the first phase of the transition from the current analog voice system to an International Civil Aviation Organization (ICAO) compliant system in which digital communication becomes the alternate and perhaps primary method of routine communication. The CPDLC application is an Air Traffic Service (ATS) application in which pilots and controllers exchange messages via an addressed data link. CPDLC includes a set of clearance, information, and request message elements that correspond to existing phraseology employed by current Air Traffic Control (ATC) procedures. These message elements encompass altitude assignments, crossing constraints, lateral deviations, route changes and clearances, speed assignments, radio frequency assignments, and various requests for information. The pilot is provided with the capability to respond to messages, to request clearances and information, to report information, and to declare/rescind an emergency. A 'free text' capability is also provided to exchange information not conforming to defined formats. This paper presents simulated results of the aeronautical telecommunication application Controller Pilot Data Link Communications over VHF Digital Link Mode 3 (VDL Mode 3). The objective of this simulation study was to determine the impact of CPDLC traffic loads, in terms of timely message delivery and capacity of the VDL Mode 3 subnetwork. The traffic model is based on and is used for generating air/ground messages with different priorities. Communication is modeled for the en route domain of the Cleveland Center air traffic (ZOB ARTCC).

Digital case-based learning system in school.

PubMed

Gu, Peipei; Guo, Jiayang

2017-01-01

With the continuing growth of multi-media learning resources, it is important to offer methods helping learners to explore and acquire relevant learning information effectively. As services that organize multi-media learning materials together to support programming learning, the digital case-based learning system is needed. In order to create a case-oriented e-learning system, this paper concentrates on the digital case study of multi-media resources and learning processes with an integrated framework. An integration of multi-media resources, testing and learning strategies recommendation as the learning unit is proposed in the digital case-based learning framework. The learning mechanism of learning guidance, multi-media materials learning and testing feedback is supported in our project. An improved personalized genetic algorithm which incorporates preference information and usage degree into the crossover and mutation process is proposed to assemble the personalized test sheet for each learner. A learning strategies recommendation solution is proposed to recommend learning strategies for learners to help them to learn. The experiments are conducted to prove that the proposed approaches are capable of constructing personalized sheets and the effectiveness of the framework.

Digital case-based learning system in school

PubMed Central

Gu, Peipei

2017-01-01

With the continuing growth of multi-media learning resources, it is important to offer methods helping learners to explore and acquire relevant learning information effectively. As services that organize multi-media learning materials together to support programming learning, the digital case-based learning system is needed. In order to create a case-oriented e-learning system, this paper concentrates on the digital case study of multi-media resources and learning processes with an integrated framework. An integration of multi-media resources, testing and learning strategies recommendation as the learning unit is proposed in the digital case-based learning framework. The learning mechanism of learning guidance, multi-media materials learning and testing feedback is supported in our project. An improved personalized genetic algorithm which incorporates preference information and usage degree into the crossover and mutation process is proposed to assemble the personalized test sheet for each learner. A learning strategies recommendation solution is proposed to recommend learning strategies for learners to help them to learn. The experiments are conducted to prove that the proposed approaches are capable of constructing personalized sheets and the effectiveness of the framework. PMID:29107965

36 CFR 1192.87 - Public information system.

Code of Federal Regulations, 2011 CFR

2011-07-01

... COMPLIANCE BOARD AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY GUIDELINES FOR TRANSPORTATION VEHICLES... digitized human speech messages, to announce stations and provide other passenger information. Alternative...

Design and application of pulse information acquisition and analysis system with dynamic recognition in traditional Chinese medicine.

PubMed

Zhang, Jian; Niu, Xin; Yang, Xue-zhi; Zhu, Qing-wen; Li, Hai-yan; Wang, Xuan; Zhang, Zhi-guo; Sha, Hong

2014-09-01

To design the pulse information which includes the parameter of pulse-position, pulse-number, pulse-shape and pulse-force acquisition and analysis system with function of dynamic recognition, and research the digitalization and visualization of some common cardiovascular mechanism of single pulse. To use some flexible sensors to catch the radial artery pressure pulse wave and utilize the high frequency B mode ultrasound scanning technology to synchronously obtain the information of radial extension and axial movement, by the way of dynamic images, then the gathered information was analyzed and processed together with ECG. Finally, the pulse information acquisition and analysis system was established which has the features of visualization and dynamic recognition, and it was applied to serve for ten healthy adults. The new system overcome the disadvantage of one-dimensional pulse information acquisition and process method which was common used in current research area of pulse diagnosis in traditional Chinese Medicine, initiated a new way of pulse diagnosis which has the new features of dynamic recognition, two-dimensional information acquisition, multiplex signals combination and deep data mining. The newly developed system could translate the pulse signals into digital, visual and measurable motion information of vessel.

Technological Improvements for Digital Fire Control Systems

DTIC Science & Technology

2017-09-30

Final Technical Status Report For DOTC-12-01-INIT061 Technological Improvements for Digital Fire Control Systems Reporting Period: 30 Sep...Initiative Information Develop and fabricate next generation designs using advanced materials and processes. This will include but is not limited to...4.2 Develop manufacturing processes 100% 4.3 Develop manufacturing processes 100% 4.4 Develop manufacturing processes 100% 5 Design Tooling

Digital Troposcatter Performance Model. Users Manual.

DTIC Science & Technology

1983-11-01

and Information Systems - .,- - - UNCLASSIFIED SECURITY CLASSIFICATION OF THIS PAGE (When Data Entered) S REPORT DOCUIAENTATION PAGE READ...Diffraction Multipath Prediction MD-918 Modem Error Rate Prediction AN/TRC-170 Link Analysis 20. ABSTRACT (Continue en reverse esie If neceseay end...configurations used in the Defense Communications System (DCS), and prediction of the performance of both the MD-918 and AN/TRC-170 digital troposcatter modems

Understanding the information needs of public health practitioners: a literature review to inform design of an interactive digital knowledge management system.

PubMed

Revere, Debra; Turner, Anne M; Madhavan, Ann; Rambo, Neil; Bugni, Paul F; Kimball, AnnMarie; Fuller, Sherrilynne S

2007-08-01

The need for rapid access to information to support critical decisions in public health cannot be disputed; however, development of such systems requires an understanding of the actual information needs of public health professionals. This paper reports the results of a literature review focused on the information needs of public health professionals. The authors reviewed the public health literature to answer the following questions: (1) What are the information needs of public health professionals? (2) In what ways are those needs being met? (3) What are the barriers to meeting those needs? (4) What is the role of the Internet in meeting information needs? The review was undertaken in order to develop system requirements to inform the design and development of an interactive digital knowledge management system. The goal of the system is to support the collection, management, and retrieval of public health documents, data, learning objects, and tools. The search method extended beyond traditional information resources, such as bibliographic databases, tables of contents (TOC), and bibliographies, to include information resources public health practitioners routinely use or have need to use--for example, grey literature, government reports, Internet-based publications, and meeting abstracts. Although few formal studies of information needs and information-seeking behaviors of public health professionals have been reported, the literature consistently indicated a critical need for comprehensive, coordinated, and accessible information to meet the needs of the public health workforce. Major barriers to information access include time, resource reliability, trustworthiness/credibility of information, and "information overload". Utilizing a novel search method that included the diversity of information resources public health practitioners use, has produced a richer and more useful picture of the information needs of the public health workforce than other literature reviews. There is a critical need for public health digital knowledge management systems designed to reflect the diversity of public health activities, to enable human communications, and to provide multiple access points to critical information resources. Public health librarians and other information specialists can serve a significant role in helping public health professionals meet their information needs through the development of evidence-based decision support systems, human-mediated expert searching and training in the use information retrieval systems.

RAILROAD DIGITAL LINE GRAPHS FOR THE MID-ATLANTIC INTEGRATED ASSESSMENT (MAIA) STUDY AREA

EPA Science Inventory

This data set is a geographic information system (GIS) coverage of railroads for the United States Environmental Protection Agency (USEPA) Mid-Atlantic Integrated Assessment (MAIA) Project region. The coverage was produced using US Geological Survey transportation digital line ...

Information Dominance in Military Decision Making.

DTIC Science & Technology

1999-06-04

This study considers how ABCS (Army Battle Command System) capabilities achieve information dominance and how they influence the military decision...making process. The work examines how ABCS enables commanders and staffs to achieve information dominance at the brigade and battalion levels. Further...future digitized systems that will gain information dominance for the future commander. It promotes the continued development information dominance technologies

Demonstration of three gorges archaeological relics based on 3D-visualization technology

NASA Astrophysics Data System (ADS)

Xu, Wenli

2015-12-01

This paper mainly focuses on the digital demonstration of three gorges archeological relics to exhibit the achievements of the protective measures. A novel and effective method based on 3D-visualization technology, which includes large-scaled landscape reconstruction, virtual studio, and virtual panoramic roaming, etc, is proposed to create a digitized interactive demonstration system. The method contains three stages: pre-processing, 3D modeling and integration. Firstly, abundant archaeological information is classified according to its history and geographical information. Secondly, build up a 3D-model library with the technology of digital images processing and 3D modeling. Thirdly, use virtual reality technology to display the archaeological scenes and cultural relics vividly and realistically. The present work promotes the application of virtual reality to digital projects and enriches the content of digital archaeology.

New Trends of Emerging Technologies in Digital Pathology.

PubMed

Bueno, Gloria; Fernández-Carrobles, M Milagro; Deniz, Oscar; García-Rojo, Marcial

2016-01-01

The future paradigm of pathology will be digital. Instead of conventional microscopy, a pathologist will perform a diagnosis through interacting with images on computer screens and performing quantitative analysis. The fourth generation of virtual slide telepathology systems, so-called virtual microscopy and whole-slide imaging (WSI), has allowed for the storage and fast dissemination of image data in pathology and other biomedical areas. These novel digital imaging modalities encompass high-resolution scanning of tissue slides and derived technologies, including automatic digitization and computational processing of whole microscopic slides. Moreover, automated image analysis with WSI can extract specific diagnostic features of diseases and quantify individual components of these features to support diagnoses and provide informative clinical measures of disease. Therefore, the challenge is to apply information technology and image analysis methods to exploit the new and emerging digital pathology technologies effectively in order to process and model all the data and information contained in WSI. The final objective is to support the complex workflow from specimen receipt to anatomic pathology report transmission, that is, to improve diagnosis both in terms of pathologists' efficiency and with new information. This article reviews the main concerns about and novel methods of digital pathology discussed at the latest workshop in the field carried out within the European project AIDPATH (Academia and Industry Collaboration for Digital Pathology). © 2016 S. Karger AG, Basel.

U. S. GEOLOGICAL SURVEY LAND REMOTE SENSING ACTIVITIES.

USGS Publications Warehouse

Frederick, Doyle G.

1983-01-01

USGS uses all types of remotely sensed data, in combination with other sources of data, to support geologic analyses, hydrologic assessments, land cover mapping, image mapping, and applications research. Survey scientists use all types of remotely sensed data with ground verifications and digital topographic and cartographic data. A considerable amount of research is being done by Survey scientists on developing automated geographic information systems that can handle a wide variety of digital data. The Survey is also investigating the use of microprocessor computer systems for accessing, displaying, and analyzing digital data.

Development of optimized techniques and requirements for computer enhancement of structural weld radiographs. Volume 1: Technical report

NASA Technical Reports Server (NTRS)

Adams, J. R.; Hawley, S. W.; Peterson, G. R.; Salinger, S. S.; Workman, R. A.

1971-01-01

A hardware and software specification covering requirements for the computer enhancement of structural weld radiographs was considered. Three scanning systems were used to digitize more than 15 weld radiographs. The performance of these systems was evaluated by determining modulation transfer functions and noise characteristics. Enhancement techniques were developed and applied to the digitized radiographs. The scanning parameters of spot size and spacing and film density were studied to optimize the information content of the digital representation of the image.

Digital mine claim density map for Federal lands in Montana, 1996

USGS Publications Warehouse

Campbell, Harry W.; Hyndman, Paul C.

1998-01-01

This report describes a digital map and data files generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim information for Federal lands in Montana as of March, 1997. Statewide, 159,704 claims had been recorded with the Bureau of Land Management since 1975. Of those claims, 21,055 (13%) are still actively held while 138,649 (87%) are closed and are no longer held. Montana contains 147,704 sections (usually 1 section equals 1 square mile) in the Public Land Survey System, with 8,569 sections (6%) containing claim data. Of the sections with claim data, 2,192 (26%) contain actively held claims. Only 1.5% of Montana’s sections contains actively held mining claims. The four types of mining claim are lode, placer, mill, and tunnel. A mill claim may be as much as 5 acres or 1/128th (0.78125%) of a square mile. A lode claim, about 20 acres, would cover 1/32nd (3.125%) of a square mile. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. The digital map and data files that are available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller. Campbell (1996) summarized the methodology and GIS techniques that were used to produce the mining claim density map of the Pacific Northwest. Campbell and Hyndman (1997) displayed mining claim information for the Pacific Northwest that used data acquired in 1994. Appendix A of this report lists the attribute data for the digital data files. Appendix B contains the GIS metadata.

Use of contextual inquiry to understand anatomic pathology workflow: Implications for digital pathology adoption

PubMed Central

Ho, Jonhan; Aridor, Orly; Parwani, Anil V.

2012-01-01

Background: For decades anatomic pathology (AP) workflow have been a highly manual process based on the use of an optical microscope and glass slides. Recent innovations in scanning and digitizing of entire glass slides are accelerating a move toward widespread adoption and implementation of a workflow based on digital slides and their supporting information management software. To support the design of digital pathology systems and ensure their adoption into pathology practice, the needs of the main users within the AP workflow, the pathologists, should be identified. Contextual inquiry is a qualitative, user-centered, social method designed to identify and understand users’ needs and is utilized for collecting, interpreting, and aggregating in-detail aspects of work. Objective: Contextual inquiry was utilized to document current AP workflow, identify processes that may benefit from the introduction of digital pathology systems, and establish design requirements for digital pathology systems that will meet pathologists’ needs. Materials and Methods: Pathologists were observed and interviewed at a large academic medical center according to contextual inquiry guidelines established by Holtzblatt et al. 1998. Notes representing user-provided data were documented during observation sessions. An affinity diagram, a hierarchal organization of the notes based on common themes in the data, was created. Five graphical models were developed to help visualize the data including sequence, flow, artifact, physical, and cultural models. Results: A total of six pathologists were observed by a team of two researchers. A total of 254 affinity notes were documented and organized using a system based on topical hierarchy, including 75 third-level, 24 second-level, and five main-level categories, including technology, communication, synthesis/preparation, organization, and workflow. Current AP workflow was labor intensive and lacked scalability. A large number of processes that may possibly improve following the introduction of digital pathology systems were identified. These work processes included case management, case examination and review, and final case reporting. Furthermore, a digital slide system should integrate with the anatomic pathologic laboratory information system. Conclusions: To our knowledge, this is the first study that utilized the contextual inquiry method to document AP workflow. Findings were used to establish key requirements for the design of digital pathology systems. PMID:23243553

U.S. Geological Survey DLG-3 and Bureau of the Census TIGER data. Development and GIS applications

USGS Publications Warehouse

Batten, Lawrence G.

1990-01-01

The U.S. Geological Survey has been actively developing digital cartographic and geographic data and standards since the early 1970's. One product is Digital Line Graph data, which offer a consistently accurate source of base category geographic information. The Bureau of the Census has combined their Dual Independent Map Encoding data with the Geological Survey's 1:100,000-scale Digital Line Graph data to prepare for the 1990 decennial census. The resulting Topologically Integrated Geographic Encoding and Referencing data offer a wealth of information. A major area of research using these data is in transportation analysis. The attributes associated with Digital Line Graphs can be used to determine the average travel times along each segment. Geographic information system functions can then be used to optimize routes through the network and to generate street name lists. Additional aspects of the subject are discussed.

Digital image processing of vascular angiograms

NASA Technical Reports Server (NTRS)

Selzer, R. H.; Beckenbach, E. S.; Blankenhorn, D. H.; Crawford, D. W.; Brooks, S. H.

1975-01-01

The paper discusses the estimation of the degree of atherosclerosis in the human femoral artery through the use of a digital image processing system for vascular angiograms. The film digitizer uses an electronic image dissector camera to scan the angiogram and convert the recorded optical density information into a numerical format. Another processing step involves locating the vessel edges from the digital image. The computer has been programmed to estimate vessel abnormality through a series of measurements, some derived primarily from the vessel edge information and others from optical density variations within the lumen shadow. These measurements are combined into an atherosclerosis index, which is found in a post-mortem study to correlate well with both visual and chemical estimates of atherosclerotic disease.

Digital data to support development of a pesticide management plan for the Standing Rock Indian Reservation, Sioux County, North Dakota, and Corson County, South Dakota

USGS Publications Warehouse

Schaap, Bryan D.

2004-01-01

As part of a program to support development of pesticide management plans for Indian Reservations, the U.S. Geological Survey has been working in cooperation with the U.S. Environmental Protection Agency to make selected information available to the Tribes or in a format easier for the Tribes to use.As a result of this program, four digital data sets related to the geology or hydrology of the Standing Rock Indian Reservation were produced as part of this report. The digital data sets are based on maps published in 1982 at the 1:250,000 scale in "Geohydrology of the Standing Rock Indian Reservation, North and South Dakota," U.S. Geological Survey Hydrologic Investigations Atlas HA-644 by L.W. Howells. The digital data sets were created by 1) scanning the appropriate map to create an image file, 2) registering the image file to real-world coordinates, 3) creating a new image file rectified to real-world coordinates, and 4) digitizing of the features of interest using the rectified image as a guide. As digital data sets, the information can be used in a geographic information system in combination with other information to help develop a pesticide management plan.

Architecture of next-generation information management systems for digital radiology enterprises

NASA Astrophysics Data System (ADS)

Wong, Stephen T. C.; Wang, Huili; Shen, Weimin; Schmidt, Joachim; Chen, George; Dolan, Tom

2000-05-01

Few information systems today offer a clear and flexible means to define and manage the automated part of radiology processes. None of them provide a coherent and scalable architecture that can easily cope with heterogeneity and inevitable local adaptation of applications. Most importantly, they often lack a model that can integrate clinical and administrative information to aid better decisions in managing resources, optimizing operations, and improving productivity. Digital radiology enterprises require cost-effective solutions to deliver information to the right person in the right place and at the right time. We propose a new architecture of image information management systems for digital radiology enterprises. Such a system is based on the emerging technologies in workflow management, distributed object computing, and Java and Web techniques, as well as Philips' domain knowledge in radiology operations. Our design adapts the approach of '4+1' architectural view. In this new architecture, PACS and RIS will become one while the user interaction can be automated by customized workflow process. Clinical service applications are implemented as active components. They can be reasonably substituted by applications of local adaptations and can be multiplied for fault tolerance and load balancing. Furthermore, it will provide powerful query and statistical functions for managing resources and improving productivity in real time. This work will lead to a new direction of image information management in the next millennium. We will illustrate the innovative design with implemented examples of a working prototype.

Digital biology and chemistry.

PubMed

Witters, Daan; Sun, Bing; Begolo, Stefano; Rodriguez-Manzano, Jesus; Robles, Whitney; Ismagilov, Rustem F

2014-09-07

This account examines developments in "digital" biology and chemistry within the context of microfluidics, from a personal perspective. Using microfluidics as a frame of reference, we identify two areas of research within digital biology and chemistry that are of special interest: (i) the study of systems that switch between discrete states in response to changes in chemical concentration of signals, and (ii) the study of single biological entities such as molecules or cells. In particular, microfluidics accelerates analysis of switching systems (i.e., those that exhibit a sharp change in output over a narrow range of input) by enabling monitoring of multiple reactions in parallel over a range of concentrations of signals. Conversely, such switching systems can be used to create new kinds of microfluidic detection systems that provide "analog-to-digital" signal conversion and logic. Microfluidic compartmentalization technologies for studying and isolating single entities can be used to reconstruct and understand cellular processes, study interactions between single biological entities, and examine the intrinsic heterogeneity of populations of molecules, cells, or organisms. Furthermore, compartmentalization of single cells or molecules in "digital" microfluidic experiments can induce switching in a range of reaction systems to enable sensitive detection of cells or biomolecules, such as with digital ELISA or digital PCR. This "digitizing" offers advantages in terms of robustness, assay design, and simplicity because quantitative information can be obtained with qualitative measurements. While digital formats have been shown to improve the robustness of existing chemistries, we anticipate that in the future they will enable new chemistries to be used for quantitative measurements, and that digital biology and chemistry will continue to provide further opportunities for measuring biomolecules, understanding natural systems more deeply, and advancing molecular and cellular analysis. Microfluidics will impact digital biology and chemistry and will also benefit from them if it becomes massively distributed.

High-Density Digital Data Storage System

NASA Technical Reports Server (NTRS)

Wright, Kenneth D.; Gray, David L.

1995-01-01

High-density digital data storage system designed for cost-effective storage of large amounts of information acquired during experiments. System accepts up to 20 channels of 16-bit digital data with overall transfer rates of 500 kilobytes per second. Data recorded on 8-millimeter magnetic tape in cartridges, each capable of holding up to five gigabytes of data. Each cartridge mounted on one of two tape drives. Operator chooses to use either or both of drives. One drive used for primary storage of data while other can be used to make a duplicate record of data. Alternatively, other drive serves as backup data-storage drive when primary one fails.

77 FR 70176 - Previous Participation Certification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-23

... percent automated and digital submission of all data and certifications is available via HUD's secure... information is designed to be 100 percent automated and digital submission of all data and certifications is available via HUD's secure Internet systems. However HUD will provide for both electronic and paper...

Digital signaling decouples activation probability and population heterogeneity.

PubMed

Kellogg, Ryan A; Tian, Chengzhe; Lipniacki, Tomasz; Quake, Stephen R; Tay, Savaş

2015-10-21

Digital signaling enhances robustness of cellular decisions in noisy environments, but it is unclear how digital systems transmit temporal information about a stimulus. To understand how temporal input information is encoded and decoded by the NF-κB system, we studied transcription factor dynamics and gene regulation under dose- and duration-modulated inflammatory inputs. Mathematical modeling predicted and microfluidic single-cell experiments confirmed that integral of the stimulus (or area, concentration × duration) controls the fraction of cells that activate NF-κB in the population. However, stimulus temporal profile determined NF-κB dynamics, cell-to-cell variability, and gene expression phenotype. A sustained, weak stimulation lead to heterogeneous activation and delayed timing that is transmitted to gene expression. In contrast, a transient, strong stimulus with the same area caused rapid and uniform dynamics. These results show that digital NF-κB signaling enables multidimensional control of cellular phenotype via input profile, allowing parallel and independent control of single-cell activation probability and population heterogeneity.

Current trends in geomorphological mapping

NASA Astrophysics Data System (ADS)

Seijmonsbergen, A. C.

2012-04-01

Geomorphological mapping is a world currently in motion, driven by technological advances and the availability of new high resolution data. As a consequence, classic (paper) geomorphological maps which were the standard for more than 50 years are rapidly being replaced by digital geomorphological information layers. This is witnessed by the following developments: 1. the conversion of classic paper maps into digital information layers, mainly performed in a digital mapping environment such as a Geographical Information System, 2. updating the location precision and the content of the converted maps, by adding more geomorphological details, taken from high resolution elevation data and/or high resolution image data, 3. (semi) automated extraction and classification of geomorphological features from digital elevation models, broadly separated into unsupervised and supervised classification techniques and 4. New digital visualization / cartographic techniques and reading interfaces. Newly digital geomorphological information layers can be based on manual digitization of polygons using DEMs and/or aerial photographs, or prepared through (semi) automated extraction and delineation of geomorphological features. DEMs are often used as basis to derive Land Surface Parameter information which is used as input for (un) supervised classification techniques. Especially when using high-res data, object-based classification is used as an alternative to traditional pixel-based classifications, to cluster grid cells into homogeneous objects, which can be classified as geomorphological features. Classic map content can also be used as training material for the supervised classification of geomorphological features. In the classification process, rule-based protocols, including expert-knowledge input, are used to map specific geomorphological features or entire landscapes. Current (semi) automated classification techniques are increasingly able to extract morphometric, hydrological, and in the near future also morphogenetic information. As a result, these new opportunities have changed the workflows for geomorphological mapmaking, and their focus have shifted from field-based techniques to using more computer-based techniques: for example, traditional pre-field air-photo based maps are now replaced by maps prepared in a digital mapping environment, and designated field visits using mobile GIS / digital mapping devices now focus on gathering location information and attribute inventories and are strongly time efficient. The resulting 'modern geomorphological maps' are digital collections of geomorphological information layers consisting of georeferenced vector, raster and tabular data which are stored in a digital environment such as a GIS geodatabase, and are easily visualized as e.g. 'birds' eye' views, as animated 3D displays, on virtual globes, or stored as GeoPDF maps in which georeferenced attribute information can be easily exchanged over the internet. Digital geomorphological information layers are increasingly accessed via web-based services distributed through remote servers. Information can be consulted - or even build using remote geoprocessing servers - by the end user. Therefore, it will not only be the geomorphologist anymore, but also the professional end user that dictates the applied use of digital geomorphological information layers.

Digital adaptive optics line-scanning confocal imaging system.

PubMed

Liu, Changgeng; Kim, Myung K

2015-01-01

A digital adaptive optics line-scanning confocal imaging (DAOLCI) system is proposed by applying digital holographic adaptive optics to a digital form of line-scanning confocal imaging system. In DAOLCI, each line scan is recorded by a digital hologram, which allows access to the complex optical field from one slice of the sample through digital holography. This complex optical field contains both the information of one slice of the sample and the optical aberration of the system, thus allowing us to compensate for the effect of the optical aberration, which can be sensed by a complex guide star hologram. After numerical aberration compensation, the corrected optical fields of a sequence of line scans are stitched into the final corrected confocal image. In DAOLCI, a numerical slit is applied to realize the confocality at the sensor end. The width of this slit can be adjusted to control the image contrast and speckle noise for scattering samples. DAOLCI dispenses with the hardware pieces, such as Shack–Hartmann wavefront sensor and deformable mirror, and the closed-loop feedbacks adopted in the conventional adaptive optics confocal imaging system, thus reducing the optomechanical complexity and cost. Numerical simulations and proof-of-principle experiments are presented that demonstrate the feasibility of this idea.

Research on models of Digital City geo-information sharing platform

NASA Astrophysics Data System (ADS)

Xu, Hanwei; Liu, Zhihui; Badawi, Rami; Liu, Haiwang

2009-10-01

The data related to Digital City has the property of large quantity, isomerous and multiple dimensions. In the original copy method of data sharing, the application departments can not solve the problem of data updating and data security in real-time. This paper firstly analyzes various patterns of sharing Digital City information and on this basis the author provides a new shared mechanism of GIS Services, with which the data producers provide Geographic Information Services to the application users through Web API, so as to the data producers and the data users can do their best respectively. Then the author takes the application system in supermarket management as an example to explain the correctness and effectiveness of the method provided in this paper.

TraitBank: An Open Digital Repository for Organism Traits

USDA-ARS?s Scientific Manuscript database

TraitBank currently serves over 11 million measurements and facts for more than 1.7 million taxa. These data are mobilized from major biodiversity information systems (e.g., International Union for Conservation of Nature, Ocean Biogeographic Information System, Paleobiology Database), literature sup...

Switching chiral solitons for algebraic operation of topological quaternary digits

NASA Astrophysics Data System (ADS)

Kim, Tae-Hwan; Cheon, Sangmo; Yeom, Han Woong

2017-02-01

Chiral objects can be found throughout nature; in condensed matter chiral objects are often excited states protected by a system's topology. The use of chiral topological excitations to carry information has been demonstrated, where the information is robust against external perturbations. For instance, reading, writing, and transfer of binary information have been demonstrated with chiral topological excitations in magnetic systems, skyrmions, for spintronic devices. The next step is logic or algebraic operations of such topological bits. Here, we show experimentally the switching between chiral topological excitations or chiral solitons of different chirality in a one-dimensional electronic system with Z4 topological symmetry. We found that a fast-moving achiral soliton merges with chiral solitons to switch their handedness. This can lead to the realization of algebraic operation of Z4 topological charges. Chiral solitons could be a platform for storage and operation of robust topological multi-digit information.

Digital mining claim density map for federal lands in Nevada: 1996

USGS Publications Warehouse

Hyndman, Paul C.; Campbell, Harry W.

1999-01-01

This report describes a digital map generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim density information for federal lands in Nevada as of March 1997. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. There is no paper map included in this Open-File report. In accordance with the Federal Land Policy and Management Act of 1976 (FLPMA), all unpatented mining claims, mill, and tunnel sites must be recorded at the appropriate Bureau of Land Management (BLM) State office. BLM maintains a cumulative computer listing of mining claims in the MCRS database with locations given by meridian, township, range, and section. A mining claim is considered closed when the claim is relinquished or a formal BLM decision declaring the mining claim null and void has been issued and the appeal period has expired. All other mining claims filed with BLM are considered to be open and actively held. The digital map (figure 1.) with the mining claim density database available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller.

Digital mining claim density map for federal lands in Utah: 1996

USGS Publications Warehouse

Hyndman, Paul C.; Campbell, Harry W.

1999-01-01

This report describes a digital map generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim density information for federal lands in Utah as of March 1997. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. There is no paper map included in this Open-File report. In accordance with the Federal Land Policy and Management Act of 1976 (FLPMA), all unpatented mining claims, mill, and tunnel sites must be recorded at the appropriate BLM State office. BLM maintains a cumulative computer listing of mining claims in the MCRS database with locations given by meridian, township, range, and section. A mining claim is considered closed when the claim is relinquished or a formal BLM decision declaring the mining claim null and void has been issued and the appeal period has expired. All other mining claims filed with BLM are considered to be open and actively held. The digital map (figure 1.) with the mining claim density database available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller.

Digital mining claim density map for federal lands in California: 1996

USGS Publications Warehouse

Hyndman, Paul C.; Campbell, Harry W.

1999-01-01

This report describes a digital map generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim density information for federal lands in California as of March 1997. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. There is no paper map included in this Open-File report. In accordance with the Federal Land Policy and Management Act of 1976 (FLPMA), all unpatented mining claims, mill, and tunnel sites must be recorded at the appropriate BLM State office. BLM maintains a cumulative computer listing of mining claims in the MCRS database with locations given by meridian, township, range, and section. A mining claim is considered closed when the claim is relinquished or a formal BLM decision declaring the mining claim null and void has been issued and the appeal period has expired. All other mining claims filed with BLM are considered to be open and actively held. The digital map (figure 1.) with the mining claim density database available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller.

Digital mining claim density map for federal lands in New Mexico: 1996

USGS Publications Warehouse

Hyndman, Paul C.; Campbell, Harry W.

1999-01-01

This report describes a digital map generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim density information for federal lands in New Mexico as of March 1997. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. There is no paper map included in this Open-File report. In accordance with the Federal Land Policy and Management Act of 1976 (FLPMA), all unpatented mining claims, mill, and tunnel sites must be recorded at the appropriate BLM State office. BLM maintains a cumulative computer listing of mining claims in the MCRS database with locations given by meridian, township, range, and section. A mining claim is considered closed when the claim is relinquished or a formal BLM decision declaring the mining claim null and void has been issued and the appeal period has expired. All other mining claims filed with BLM are considered to be open and actively held. The digital map (figure 1.) with the mining claim density database available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller.

Digital mining claim density map for federal lands in Arizona: 1996

USGS Publications Warehouse

Hyndman, Paul C.; Campbell, Harry W.

1999-01-01

This report describes a digital map generated by the U.S. Geological Survey (USGS) to provide digital spatial mining claim density information for federal lands in Arizona as of March 1997. Mining claim data is earth science information deemed to be relevant to the assessment of historic, current, and future ecological, economic, and social systems. There is no paper map included in this Open-File report. In accordance with the Federal Land Policy and Management Act of 1976 (FLPMA), all unpatented mining claims, mill, and tunnel sites must be recorded at the appropriate BLM State office. BLM maintains a cumulative computer listing of mining claims in the MCRS database with locations given by meridian, township, range, and section. A mining claim is considered closed when the claim is relinquished or a formal BLM decision declaring the mining claim null and void has been issued and the appeal period has expired. All other mining claims filed with BLM are considered to be open and actively held. The digital map (figure 1.) with the mining claim density database available in this report are suitable for geographic information system (GIS)-based regional assessments at a scale of 1:100,000 or smaller.

Digital communication system

NASA Technical Reports Server (NTRS)

Monford, L. G., Jr. (Inventor)

1974-01-01

A digital communication system is reported for parallel operation of 16 or more transceiver units with the use of only four interconnecting wires. A remote synchronization circuit produces unit address control words sequentially in data frames of 16 words. Means are provided in each transceiver unit to decode calling signals and to transmit calling and data signals. The transceivers communicate with each other over one data line. The synchronization unit communicates the address control information to the transceiver units over an address line and further provides the timing information over a clock line. A reference voltage level or ground line completes the interconnecting four wire hookup.

Digital item for digital human memory--television commerce application: family tree albuming system

NASA Astrophysics Data System (ADS)

Song, Jaeil; Lee, Hyejoo; Hong, JinWoo

2004-01-01

Technical advance in creating, storing digital media in daily life enables computers to capture human life and remember it as people do. A critical point with digitizing human life is how to recall bits of experience that are associated by semantic information. This paper proposes a technique for structuring dynamic digital object based on MPEG-21 Digital Item (DI) in order to recall human"s memory and providing interactive TV service on family tree albuming system as one of its applications. DIs are a dynamically reconfigurable, uniquely identified, described by a descriptor language, logical unit for structuring relationship among multiple media resources. Digital Item Processing (DIP) provides the means to interact with DIs to remind context to user, with active properties where objects have executable properties. Each user can adapt DIs" active properties to tailor the behavior of DIs to match his/her own specific needs. DIs" technologies in Intellectual Property Management and Protection (IPMP) can be used for privacy protection. In the interaction between the social space and technological space, the internal dynamics of family life fits well sharing family albuming service via family television. Family albuming service can act as virtual communities builders for family members. As memory is shared between family members, multiple annotations (including active properties on contextual information) will be made with snowballing value.

Going fully digital: Perspective of a Dutch academic pathology lab

PubMed Central

Stathonikos, Nikolas; Veta, Mitko; Huisman, André; van Diest, Paul J.

2013-01-01

During the last years, whole slide imaging has become more affordable and widely accepted in pathology labs. Digital slides are increasingly being used for digital archiving of routinely produced clinical slides, remote consultation and tumor boards, and quantitative image analysis for research purposes and in education. However, the implementation of a fully digital Pathology Department requires an in depth look into the suitability of digital slides for routine clinical use (the image quality of the produced digital slides and the factors that affect it) and the required infrastructure to support such use (the storage requirements and integration with lab management and hospital information systems). Optimization of digital pathology workflow requires communication between several systems, which can be facilitated by the use of open standards for digital slide storage and scanner management. Consideration of these aspects along with appropriate validation of the use of digital slides for routine pathology can pave the way for pathology departments to go “fully digital.” In this paper, we summarize our experiences so far in the process of implementing a fully digital workflow at our Pathology Department and the steps that are needed to complete this process. PMID:23858390

How You Store Information Affects How You Can Retrieve It: A Fundamental Principle for Business Students Studying Information Systems and Technology

ERIC Educational Resources Information Center

Silver, Mark S.

2017-01-01

During the current period of rapid technological change, business students need to emerge from their introductory course in Information Systems (IS) with a set of fundamental principles to help them "think about Information Technology (IT)" in future courses and the workplace. Given the digital revolution, they also need to appreciate…

E-HOSPITAL - A Digital Workbench for Hospital Operations and Services Planning Using Information Technology and Algebraic Languages.

PubMed

Gartner, Daniel; Padman, Rema

2017-01-01

In this paper, we describe the development of a unified framework and a digital workbench for the strategic, tactical and operational hospital management plan driven by information technology and analytics. The workbench can be used not only by multiple stakeholders in the healthcare delivery setting, but also for pedagogical purposes on topics such as healthcare analytics, services management, and information systems. This tool combines the three classical hierarchical decision-making levels in one integrated environment. At each level, several decision problems can be chosen. Extensions of mathematical models from the literature are presented and incorporated into the digital platform. In a case study using real-world data, we demonstrate how we used the workbench to inform strategic capacity planning decisions in a multi-hospital, multi-stakeholder setting in the United Kingdom.

Multicentre analysis of treatment planning information: technical requirements, possible applications and a proposal.

PubMed

Ebert, M A; Blight, J; Price, S; Haworth, A; Hamilton, C; Cornes, D; Joseph, D J

2004-09-01

Digital data from 3-D treatment planning computers is generally used for patient planning and then never considered again. However, such data contains enormous quantities of information regarding patient geometries, tissue outlining, treatment approaches and dose distributions. Were such data accessible from planning systems from multiple manufacturers, there would be substantial opportunities for undertaking quality assurance of radiotherapy clinical trials, prospective assessment of trial outcomes and basic treatment planning research and development. The technicalities of data exchange between planning systems are outlined, and previous attempts at producing systems capable of viewing and/or manipulating imaging and radiotherapy digital data reviewed. Development of a software system for enhancing the quality of Australasian clinical trials is proposed.

Design and evaluation of a sensor fail-operational control system for a digitally controlled turbofan engine

NASA Technical Reports Server (NTRS)

Hrach, F. J.; Arpasi, D. J.; Bruton, W. M.

1975-01-01

A self-learning, sensor fail-operational, control system for the TF30-P-3 afterburning turbofan engine was designed and evaluated. The sensor fail-operational control system includes a digital computer program designed to operate in conjunction with the standard TF30-P-3 bill-of-materials control. Four engine measurements and two compressor face measurements are tested. If any engine measurements are found to have failed, they are replaced by values synthesized from computer-stored information. The control system was evaluated by using a realtime, nonlinear, hybrid computer engine simulation at sea level static condition, at a typical cruise condition, and at several extreme flight conditions. Results indicate that the addition of such a system can improve the reliability of an engine digital control system.

Simulation of digital mammography images

NASA Astrophysics Data System (ADS)

Workman, Adam

2005-04-01

A number of different technologies are available for digital mammography. However, it is not clear how differences in the physical performance aspects of the different imaging technologies affect clinical performance. Randomised controlled trials provide a means of gaining information on clinical performance however do not provide direct comparison of the different digital imaging technologies. This work describes a method of simulating the performance of different digital mammography systems. The method involves modifying the imaging performance parameters of images from a small field of view (SFDM), high resolution digital imaging system used for spot imaging. Under normal operating conditions this system produces images with higher signal-to-noise ratio (SNR) over a wide spatial frequency range than current full field digital mammography (FFDM) systems. The SFDM images can be 'degraded" by computer processing to simulate the characteristics of a FFDM system. Initial work characterised the physical performance (MTF, NPS) of the SFDM detector and developed a model and method for simulating signal transfer and noise properties of a FFDM system. It was found that the SNR properties of the simulated FFDM images were very similar to those measured from an actual FFDM system verifying the methodology used. The application of this technique to clinical images from the small field system will allow the clinical performance of different FFDM systems to be simulated and directly compared using the same clinical image datasets.

Evaluation of a Digital Companion for Older Adults with Mild Cognitive Impairment.

PubMed

Demiris, George; Thompson, Hilaire J; Lazar, Amanda; Lin, Shih-Yin

2016-01-01

Study Objective: The purpose of this study was to examine the feasibility of a digital companion system used by older adults with mild cognitive impairment (MCI). We utilized a commercially available system that is comprehensive in its functionalities (including conversation ability, use of pictures and other media, and reminders) to explore the system's impact on older adults ' social interactions, anxiety, depressive symptoms, and acceptance of the system. Study Design: We conducted a three-month mixed methods evaluation study of the digital companion. Results: Ten female community-dwelling older adults (average age 78.3 years) participated in the study. Overall, participants utilized the tool regularly and appreciated its presence and their interactions. Participants scored higher at the end of the study in cognition and social support scales, and lower in presence of depressive symptoms. Conclusion: Findings indicate the feasibility of a digital companion for people with MCI and inform the need for additional research.

Computer program user's manual for FIREFINDER digital topographic data verification library dubbing system

NASA Astrophysics Data System (ADS)

Ceres, M.; Heselton, L. R., III

1981-11-01

This manual describes the computer programs for the FIREFINDER Digital Topographic Data Verification-Library-Dubbing System (FFDTDVLDS), and will assist in the maintenance of these programs. The manual contains detailed flow diagrams and associated descriptions for each computer program routine and subroutine. Complete computer program listings are also included. This information should be used when changes are made in the computer programs. The operating system has been designed to minimize operator intervention.

The role of data fusion in predictive maintenance using digital twin

NASA Astrophysics Data System (ADS)

Liu, Zheng; Meyendorf, Norbert; Mrad, Nezih

2018-04-01

Modern aerospace industry is migrating from reactive to proactive and predictive maintenance to increase platform operational availability and efficiency, extend its useful life cycle and reduce its life cycle cost. Multiphysics modeling together with data-driven analytics generate a new paradigm called "Digital Twin." The digital twin is actually a living model of the physical asset or system, which continually adapts to operational changes based on the collected online data and information, and can forecast the future of the corresponding physical counterpart. This paper reviews the overall framework to develop a digital twin coupled with the industrial Internet of Things technology to advance aerospace platforms autonomy. Data fusion techniques particularly play a significant role in the digital twin framework. The flow of information from raw data to high-level decision making is propelled by sensor-to-sensor, sensor-to-model, and model-to-model fusion. This paper further discusses and identifies the role of data fusion in the digital twin framework for aircraft predictive maintenance.

Anatomical information in radiation treatment planning.

PubMed

Kalet, I J; Wu, J; Lease, M; Austin-Seymour, M M; Brinkley, J F; Rosse, C

1999-01-01

We report on experience and insights gained from prototyping, for clinical radiation oncologists, a new access tool for the University of Washington Digital Anatomist information resources. This access tool is designed to integrate with a radiation therapy planning (RTP) system in use in a clinical setting. We hypothesize that the needs of practitioners in a clinical setting are different from the needs of students, the original targeted users of the Digital Anatomist system, but that a common knowledge resource can serve both. Our prototype was designed to help define those differences and study the feasibility of a full anatomic reference system that will support both clinical radiation therapy and all the existing educational applications.

Video Analysis and Remote Digital Ethnography: Approaches to understanding user perspectives and processes involving healthcare information technology.

PubMed

Kushniruk, Andre W; Borycki, Elizabeth M

2015-01-01

Innovations in healthcare information systems promise to revolutionize and streamline healthcare processes worldwide. However, the complexity of these systems and the need to better understand issues related to human-computer interaction have slowed progress in this area. In this chapter the authors describe their work in using methods adapted from usability engineering, video ethnography and analysis of digital log files for improving our understanding of complex real-world healthcare interactions between humans and technology. The approaches taken are cost-effective and practical and can provide detailed ethnographic data on issues health professionals and consumers encounter while using systems as well as potential safety problems. The work is important in that it can be used in techno-anthropology to characterize complex user interactions with technologies and also to provide feedback into redesign and optimization of improved healthcare information systems.

Information theoretic analysis of linear shift-invariant edge-detection operators

NASA Astrophysics Data System (ADS)

Jiang, Bo; Rahman, Zia-ur

2012-06-01

Generally, the designs of digital image processing algorithms and image gathering devices remain separate. Consequently, the performance of digital image processing algorithms is evaluated without taking into account the influences by the image gathering process. However, experiments show that the image gathering process has a profound impact on the performance of digital image processing and the quality of the resulting images. Huck et al. proposed one definitive theoretic analysis of visual communication channels, where the different parts, such as image gathering, processing, and display, are assessed in an integrated manner using Shannon's information theory. We perform an end-to-end information theory based system analysis to assess linear shift-invariant edge-detection algorithms. We evaluate the performance of the different algorithms as a function of the characteristics of the scene and the parameters, such as sampling, additive noise etc., that define the image gathering system. The edge-detection algorithm is regarded as having high performance only if the information rate from the scene to the edge image approaches its maximum possible. This goal can be achieved only by jointly optimizing all processes. Our information-theoretic assessment provides a new tool that allows us to compare different linear shift-invariant edge detectors in a common environment.

49 CFR 38.103 - Public information system.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false Public information system. 38.103 Section 38.103 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY... personnel, or recorded or digitized human speech messages, to announce stations and provide other passenger...

49 CFR 38.87 - Public information system.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false Public information system. 38.87 Section 38.87 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES ACT (ADA) ACCESSIBILITY... personnel, or recorded or digitized human speech messages, to announce stations and provide other passenger...

WRIS: a resource information system for wildland management

Treesearch

Robert M. Russell; David A. Sharpnack; Elliot Amidon

1975-01-01

WRIS (Wildland Resource Information System) is a computer system for processing, storing, retrieving, updating, and displaying geographic data. The polygon, representing a land area boundary, forms the building block of WRIS. Polygons form a map. Maps are digitized manually or by automatic scanning. Computer programs can extract and produce polygon maps and can overlay...

What Is Anonymous?: A Case Study of an Information Systems Hacker Activist Collective Movement

ERIC Educational Resources Information Center

Pendergrass, William Stanley

2013-01-01

Interconnected computer information systems have become indispensable aspects of modern life. All forms of communication, education, finance, commerce and identity utilize these systems creating a permanent personal presence for all of us within this digital world. Individuals who reveal or threaten to reveal these personal identities for various…

A direct-view customer-oriented digital holographic camera

NASA Astrophysics Data System (ADS)

Besaga, Vira R.; Gerhardt, Nils C.; Maksimyak, Peter P.; Hofmann, Martin R.

2018-01-01

In this paper, we propose a direct-view digital holographic camera system consisting mostly of customer-oriented components. The camera system is based on standard photographic units such as camera sensor and objective and is adapted to operate under off-axis external white-light illumination. The common-path geometry of the holographic module of the system ensures direct-view operation. The system can operate in both self-reference and self-interference modes. As a proof of system operability, we present reconstructed amplitude and phase information of a test sample.

Application of digital mapping technology to the display of hydrologic information; a proof-of-concept test in the Fox-Wolf River Basin, Wisconsin

USGS Publications Warehouse

Moore, G.K.; Baten, L.G.; Allord, G.J.; Robinove, C.J.

1983-01-01

The Fox-Wolf River basin in east-central Wisconsin was selected to test concepts for a water-resources information system using digital mapping technology. This basin of 16,800 sq km is typical of many areas in the country. Fifty digital data sets were included in the Fox-Wolf information system. Many data sets were digitized from 1:500,000 scale maps and overlays. Some thematic data were acquired from WATSTORE and other digital data files. All data were geometrically transformed into a Lambert Conformal Conic map projection and converted to a raster format with a 1-km resolution. The result of this preliminary processing was a group of spatially registered, digital data sets in map form. Parameter evaluation, areal stratification, data merging, and data integration were used to achieve the processing objectives and to obtain analysis results for the Fox-Wolf basin. Parameter evaluation includes the visual interpretation of single data sets and digital processing to obtain new derived data sets. In the areal stratification stage, masks were used to extract from one data set all features that are within a selected area on another data set. Most processing results were obtained by data merging. Merging is the combination of two or more data sets into a composite product, in which the contribution of each original data set is apparent and can be extracted from the composite. One processing result was also obtained by data integration. Integration is the combination of two or more data sets into a single new product, from which the original data cannot be separated or calculated. (USGS)

Analysis of discrepancies observed between digital and analog images during a clinical trial of IRIS

NASA Astrophysics Data System (ADS)

Goldberg, Morris; Coristine, Marjorie; Currie, Shawn; Belanger, Garry; Ahuja, J.; Dillon, Richard F.; Robertson, John G.

1990-08-01

A clinical trial of an Integrated Radiological Information System (IRIS) was conducted at the Ottawa Civic Hospital with the Department of Emergency Medicine and the Department of Radiological Sciences between April 4, and May 12, 1989. During the trial, 319 active Emergency Department cases (905 films) were processed using IRIS. Radiologists examined the digital images on the image screen to formulate a diagnosis, then before dictating a report, they examined the analog films. In 30 cases there was a discrepancy between the information obtained while viewing the digital images on IRIS and the information obtained from the analog films. These anomalous cases were used in an independent study of the discrepancies. In the study, each case was reviewed in both digital and analog form by three physicians who provided a comparative rating of diagnostic quality. Any perceived differences between the digital and analog media were noted. Particular attention was paid to rating the relevance of the IRIS enhancement capabilities. Although ratings for digital images were high, the comparative ratings for the film are in general better. An analysis of the individual cases shows that: (i) most of the discrepancies probably resulted from physician inexperience in reading radiographs in digital form, (ii) the IRIS enhancement facilities significantly increase the ratings of satisfaction or perceived quality of digital images and (iii) an appropriate choice of enhancement may make visible the required diagnostic features for cases where some reviewers did not find the image/digital discrepant.

Audit and Certification Process for Science Data Digital Repositories

NASA Astrophysics Data System (ADS)

Hughes, J. S.; Giaretta, D.; Ambacher, B.; Ashley, K.; Conrad, M.; Downs, R. R.; Garrett, J.; Guercio, M.; Lambert, S.; Longstreth, T.; Sawyer, D. M.; Sierman, B.; Tibbo, H.; Waltz, M.

2011-12-01

Science data digital repositories are entrusted to ensure that a science community's data are available and useful to users both today and in the future. Part of the challenge in meeting this responsibility is identifying the standards, policies and procedures required to accomplish effective data preservation. Subsequently a repository should be evaluated on whether or not they are effective in their data preservation efforts. This poster will outline the process by which digital repositories are being formally evaluated in terms of their ability to preserve the digitally encoded information with which they have been entrusted. The ISO standards on which this is based will be identified and the relationship of these standards to the Open Archive Information System (OAIS) reference model will be shown. Six test audits have been conducted with three repositories in Europe and three in the USA. Some of the major lessons learned from these test audits will be briefly described. An assessment of the possible impact of this type of audit and certification on the practice of preserving digital information will also be provided.

Using a geographic information system and scanning technology to create high-resolution land-use data sets

USGS Publications Warehouse

Harvey, Craig A.; Kolpin, Dana W.; Battaglin, William A.

1996-01-01

A geographic information system (GIS) procedure was developed to compile low-altitude aerial photography, digitized data, and land-use data from U.S. Department of Agriculture Consolidated Farm Service Agency (CFSA) offices into a high-resolution (approximately 5 meters) land-use GIS data set. The aerial photography consisted of 35-mm slides which were scanned into tagged information file format (TIFF) images. These TIFF images were then imported into the GIS where they were registered into a geographically referenced coordinate system. Boundaries between land use were delineated from these GIS data sets using on-screen digitizing techniques. Crop types were determined using information obtained from the U.S. Department of Agriculture CFSA offices. Crop information not supplied by the CFSA was attributed by manual classification procedures. Automated methods to provide delineation of the field boundaries and land-use classification were investigated. It was determined that using these data sources, automated methods were less efficient and accurate than manual methods of delineating field boundaries and classifying land use.

Risk management communication system between a local government and residents using several network systems and terminal devices

NASA Astrophysics Data System (ADS)

Ohyama, Takashi; Enomoto, Hiroyuki; Takei, Yuichiro; Maeda, Yuji

2009-05-01

Most of Japan's local governments utilize municipal disaster-management radio communications systems to communicate information on disasters or terrorism to residents. The national government is progressing in efforts toward digitalization by local governments of these systems, but only a small number (approx. 10%) have introduced such equipment due to its requiring large amounts of investment. On the other hand, many local governments are moving forward in installation of optical fiber networks for the purpose of eliminating the "digital divide." We herein propose a communication system as an alternative or supplement to municipal disaster-management radio communications systems, which utilizes municipal optical fiber networks, the internet and similar networks and terminals. The system utilizes the multiple existing networks and is capable of instantly distributing to all residents, and controlling, risk management information. We describe the system overview and the field trials conducted with a local government using this system.

Infectious Disease Information Collection System at the Scene of Disaster Relief Based on a Personal Digital Assistant.

PubMed

Li, Ya-Pin; Gao, Hong-Wei; Fan, Hao-Jun; Wei, Wei; Xu, Bo; Dong, Wen-Long; Li, Qing-Feng; Song, Wen-Jing; Hou, Shi-Ke

2017-12-01

The objective of this study was to build a database to collect infectious disease information at the scene of a disaster through the use of 128 epidemiological questionnaires and 47 types of options, with rapid acquisition of information regarding infectious disease and rapid questionnaire customization at the scene of disaster relief by use of a personal digital assistant (PDA). SQL Server 2005 (Microsoft Corp, Redmond, WA) was used to create the option database for the infectious disease investigation, to develop a client application for the PDA, and to deploy the application on the server side. The users accessed the server for data collection and questionnaire customization with the PDA. A database with a set of comprehensive options was created and an application system was developed for the Android operating system (Google Inc, Mountain View, CA). On this basis, an infectious disease information collection system was built for use at the scene of disaster relief. The creation of an infectious disease information collection system and rapid questionnaire customization through the use of a PDA was achieved. This system integrated computer technology and mobile communication technology to develop an infectious disease information collection system and to allow for rapid questionnaire customization at the scene of disaster relief. (Disaster Med Public Health Preparedness. 2017;11:668-673).

Robotics and Virtual Reality for Cultural Heritage Digitization and Fruition

NASA Astrophysics Data System (ADS)

Calisi, D.; Cottefoglie, F.; D'Agostini, L.; Giannone, F.; Nenci, F.; Salonia, P.; Zaratti, M.; Ziparo, V. A.

2017-05-01

In this paper we present our novel approach for acquiring and managing digital models of archaeological sites, and the visualization techniques used to showcase them. In particular, we will demonstrate two technologies: our robotic system for digitization of archaeological sites (DigiRo) result of over three years of efforts by a group of cultural heritage experts, computer scientists and roboticists, and our cloud-based archaeological information system (ARIS). Finally we describe the viewers we developed to inspect and navigate the 3D models: a viewer for the web (ROVINA Web Viewer) and an immersive viewer for Virtual Reality (ROVINA VR Viewer).

The Digital School Library: A World-Wide Development and a Fascinating Challenge.

ERIC Educational Resources Information Center

Loertscher, David

2003-01-01

Explores the academic environment of a total information system for school libraries based on the idea of a digital intranet. Discusses safety; customization; the core library collection; curriculum-specific collections; access to short-term resources; Internet access; personalized features; search engines; equity issues; and staffing. (LRW)

"It's All about Standardisation"--Exploring the Digital (Re)Configuration of School Management and Administration

ERIC Educational Resources Information Center

Selwyn, Neil

2011-01-01

Schools have long made use of digital technologies to support the co-ordination of management and administrative processes--not least "management information systems", "virtual learning environments" and other "institutional technologies". The last five years have seen the convergence of these technologies into…

Modelling topographic potential for erosion and deposition using GIS

Treesearch

Helena Mitasova; Louis R. Iverson

1996-01-01

Modelling of erosion and deposition in complex terrain within a geographical information system (GIS) requires a high resolution digital elevation model (DEM), reliable estimation of topographic parameters, and formulation of erosion models adequate for digital representation of spatially distributed parameters. Regularized spline with tension was integrated within a...

FIAMODEL: Users Guide Version 3.0.

Treesearch

Scott A. Pugh; David D. Reed; Kurt S. Pregitzer; Patrick D. Miles

2002-01-01

FIAMODEL is a geographic information system (GIS program used to summarize Forest Inventory and Analysis (FIA, USDA Forest Service) data such as volume. The model runs in ArcView and allows users to select FIA plots with heads-up-digitizing, overlays of digital map layers, or queries based on specific plot attributes.

The Digital Workforce: Update, August 2000 [and] The Digital Work Force: State Data & Rankings, September 2000.

ERIC Educational Resources Information Center

Sargent, John

The Office of Technology Policy analyzed Bureau of Labor Statistics' growth projections for the core occupational classifications of IT (information technology) workers to assess future demand in the United States. Classifications studied were computer engineers, systems analysts, computer programmers, database administrators, computer support…

Anatomic pathology laboratory information systems: a review.

PubMed

Park, Seung Lyung; Pantanowitz, Liron; Sharma, Gaurav; Parwani, Anil Vasdev

2012-03-01

The modern anatomic pathology laboratory depends on a reliable information infrastructure to register specimens, record gross and microscopic findings, regulate laboratory workflow, formulate and sign out report(s), disseminate them to the intended recipients across the whole health system, and support quality assurance measures. This infrastructure is provided by the Anatomical Pathology Laboratory Information Systems (APLIS), which have evolved over decades and now are beginning to support evolving technologies like asset tracking and digital imaging. As digital pathology transitions from "the way of the future" to "the way of the present," the APLIS continues to be one of the key effective enablers of the scope and practice of pathology. In this review, we discuss the evolution, necessary components, architecture and functionality of the APLIS that are crucial to today's practicing pathologist and address the demands of emerging trends on the future APLIS.

[Digital signature: new prospects for the information of the cardiologic clinical card].

PubMed

Cervesato, E; Antonini-Canterin, F; Nicolosi, G L

2001-02-01

In the last few years, remarkable improvements have been made in computerized database systems used in cardiology. However, they will not easily lead to further relevant improvements unless the weaknesses and the gaps deriving from the obligation of forming and storing case sheets, according to law, are faced and resolved in an original way. This article covers the topic of the digital signature and how it could form the basis for a new powerful impulse to the process of informatization of cardiology records. The proposal of elaborating a totally computerized case sheet involves the need of rationalizing the flow of clinical information and of implementing a management system integrated with the hospital information system. The elimination of paper support will probably lead to an advantageous cycle that will involve the entire hospital, both clinically as well as administratively.

A "Social Bitcoin" could sustain a democratic digital world

NASA Astrophysics Data System (ADS)

Kleineberg, Kaj-Kolja; Helbing, Dirk

2016-12-01

A multidimensional financial system could provide benefits for individuals, companies, and states. Instead of top-down control, which is destined to eventually fail in a hyperconnected world, a bottom-up creation of value can unleash creative potential and drive innovations. Multiple currency dimensions can represent different externalities and thus enable the design of incentives and feedback mechanisms that foster the ability of complex dynamical systems to self-organize and lead to a more resilient society and sustainable economy. Modern information and communication technologies play a crucial role in this process, as Web 2.0 and online social networks promote cooperation and collaboration on unprecedented scales. Within this contribution, we discuss how one dimension of a multidimensional currency system could represent socio-digital capital (Social Bitcoins) that can be generated in a bottom-up way by individuals who perform search and navigation tasks in a future version of the digital world. The incentive to mine Social Bitcoins could sustain digital diversity, which mitigates the risk of totalitarian control by powerful monopolies of information and can create new business opportunities needed in times where a large fraction of current jobs is estimated to disappear due to computerisation.

A topological system for delineation and codification of the Earth's river basins

USGS Publications Warehouse

Verdin, K.L.; Verdin, J.P.

1999-01-01

A comprehensive reference system for the Earth's river basins is proposed as a support to fiver basin management, global change research, and the pursuit of sustainable development. A natural system for delineation and codification of basins is presented which is based upon topographic control and the topology of the fiver network. These characteristics make the system well suited for implementation and use with digital elevation models (DEMs) and geographic information systems. A demonstration of these traits is made with the 30-arcsecond GTOPO30 DEM for North America. The system has additional appeal owing to its economy of digits and the topological information that they carry. This is illustrated through presentation of comparisons with USGS hydrologic unit codes and demonstration of the use of code numbers to reveal dependence or independence of water use activities within a basin.

Automated site characterization for robotic sample acquisition systems

NASA Astrophysics Data System (ADS)

Scholl, Marija S.; Eberlein, Susan J.

1993-04-01

A mobile, semiautonomous vehicle with multiple sensors and on-board intelligence is proposed for performing preliminary scientific investigations on extraterrestrial bodies prior to human exploration. Two technologies, a hybrid optical-digital computer system based on optical correlator technology and an image and instrument data analysis system, provide complementary capabilities that might be part of an instrument package for an intelligent robotic vehicle. The hybrid digital-optical vision system could perform real-time image classification tasks using an optical correlator with programmable matched filters under control of a digital microcomputer. The data analysis system would analyze visible and multiband imagery to extract mineral composition and textural information for geologic characterization. Together these technologies would support the site characterization needs of a robotic vehicle for both navigational and scientific purposes.

The construction of a public key infrastructure for healthcare information networks in Japan.

PubMed

Sakamoto, N

2001-01-01

The digital signature is a key technology in the forthcoming Internet society for electronic healthcare as well as for electronic commerce. Efficient exchanges of authorized information with a digital signature in healthcare information networks require a construction of a public key infrastructure (PKI). In order to introduce a PKI to healthcare information networks in Japan, we proposed a development of a user authentication system based on a PKI for user management, user authentication and privilege management of healthcare information systems. In this paper, we describe the design of the user authentication system and its implementation. The user authentication system provides a certification authority service and a privilege management service while it is comprised of a user authentication client and user authentication serves. It is designed on a basis of an X.509 PKI and is implemented with using OpenSSL and OpenLDAP. It was incorporated into the financial information management system for the national university hospitals and has been successfully working for about one year. The hospitals plan to use it as a user authentication method for their whole healthcare information systems. One implementation of the system is free to the national university hospitals with permission of the Japanese Ministry of Education, Culture, Sports, Science and Technology. Another implementation is open to the other healthcare institutes by support of the Medical Information System Development Center (MEDIS-DC). We are moving forward to a nation-wide construction of a PKI for healthcare information networks based on it.

Mackay campus of environmental education and digital cultural construction: the application of 3D virtual reality

NASA Astrophysics Data System (ADS)

Chien, Shao-Chi; Chung, Yu-Wei; Lin, Yi-Hsuan; Huang, Jun-Yi; Chang, Jhih-Ting; He, Cai-Ying; Cheng, Yi-Wen

2012-04-01

This study uses 3D virtual reality technology to create the "Mackay campus of the environmental education and digital cultural 3D navigation system" for local historical sites in the Tamsui (Hoba) area, in hopes of providing tourism information and navigation through historical sites using a 3D navigation system. We used Auto CAD, Sketch Up, and SpaceEyes 3D software to construct the virtual reality scenes and create the school's historical sites, such as the House of Reverends, the House of Maidens, the Residence of Mackay, and the Education Hall. We used this technology to complete the environmental education and digital cultural Mackay campus . The platform we established can indeed achieve the desired function of providing tourism information and historical site navigation. The interactive multimedia style and the presentation of the information will allow users to obtain a direct information response. In addition to showing the external appearances of buildings, the navigation platform can also allow users to enter the buildings to view lifelike scenes and textual information related to the historical sites. The historical sites are designed according to their actual size, which gives users a more realistic feel. In terms of the navigation route, the navigation system does not force users along a fixed route, but instead allows users to freely control the route they would like to take to view the historical sites on the platform.

Creating a Canonical Scientific and Technical Information Classification System for NCSTRL+

NASA Technical Reports Server (NTRS)

Tiffany, Melissa E.; Nelson, Michael L.

1998-01-01

The purpose of this paper is to describe the new subject classification system for the NCSTRL+ project. NCSTRL+ is a canonical digital library (DL) based on the Networked Computer Science Technical Report Library (NCSTRL). The current NCSTRL+ classification system uses the NASA Scientific and Technical (STI) subject classifications, which has a bias towards the aerospace, aeronautics, and engineering disciplines. Examination of other scientific and technical information classification systems showed similar discipline-centric weaknesses. Traditional, library-oriented classification systems represented all disciplines, but were too generalized to serve the needs of a scientific and technically oriented digital library. Lack of a suitable existing classification system led to the creation of a lightweight, balanced, general classification system that allows the mapping of more specialized classification schemes into the new framework. We have developed the following classification system to give equal weight to all STI disciplines, while being compact and lightweight.

Digital contract approach for consistent and predictable multimedia information delivery in electronic commerce

NASA Astrophysics Data System (ADS)

Konana, Prabhudev; Gupta, Alok; Whinston, Andrew B.

1997-01-01

A pure 'technological' solution to network quality problems is incomplete since any benefits from new technologies are offset by the demand from exponentially growing electronic commerce ad data-intensive applications. SInce an economic paradigm is implicit in electronic commerce, we propose a 'market-system' approach to improve quality of service. Quality of service for digital products takes on a different meaning since users view quality of service differently and value information differently. We propose a framework for electronic commerce that is based on an economic paradigm and mass-customization, and works as a wide-area distributed management system. In our framework, surrogate-servers act as intermediaries between information provides and end- users, and arrange for consistent and predictable information delivery through 'digital contracts.' These contracts are negotiated and priced based on economic principles. Surrogate servers pre-fetched, through replication, information from many different servers and consolidate based on demand expectations. In order to recognize users' requirements and process requests accordingly, real-time databases are central to our framework. We also propose that multimedia information be separated into slowly changing and rapidly changing data streams to improve response time requirements. Surrogate- servers perform the tasks of integration of these data streams that is transparent to end-users.

Spatial digital database for the geologic map of the east part of the Pullman 1° x 2° quadrangle, Idaho

USGS Publications Warehouse

Rember, William C.; Bennett, Earl H.

2001-01-01

he paper geologic map of the east part of the Pullman 1·x 2· degree quadrangle, Idaho (Rember and Bennett, 1979) was scanned and initially attributed by Optronics Specialty Co., Inc. (Northridge, CA) and remitted to the U.S. Geological Survey for further attribution and publication of the geospatial digital files. The resulting digital geologic map GIS can be queried in many ways to produce a variety of geologic maps. This digital geospatial database is one of many being created by the U.S. Geological Survey as an ongoing effort to provide geologic information in a geographic information system (GIS) for use in spatial analysis. Digital base map data files (topography, roads, towns, rivers and lakes, and others.) are not included: they may be obtained from a variety of commercial and government sources. This database is not meant to be used or displayed at any scale larger than 1:250,000 (for example, 1:100,000 or 1:24,000). The digital geologic map graphics and plot files (pull250k.gra/.hp /.eps) that are provided in the digital package are representations of the digital database.

Land status and federal mineral ownership in the Powder River basin, Wyoming and Montana; a digital data set for geographic information systems

USGS Publications Warehouse

Biewick, Laura; Urbanowski, Shayne R.; Cain, Sheila; Neasloney, Larry

1998-01-01

As the Nation's energy resources continue to be examined for development, it is critical that a digital database exist that contains location data for all Federal land and mineral resources. The U.S. Geological Survey (USGS), in cooperation with the Bureau of Land Management (BLM), is collecting these ownership files and compiling them in Environmental Systems Research Institute, Inc. (ESRI) ARC/INFO coverages, to form a standardized data library. A coverage is a digital version of a map in the form of vector data storage. These coverages are combined with models of coal deposits from the USGS National Coal Resource Assessment project, a five-year effort to identify and characterize the coal beds and coal zones that will provide fuel for the Nation’s energy needs during the first quarter of the twenty-first century. Geographic and geologic data layers are integrated in a Geographic Information System (GIS) to answer complex geo-spatial questions concerning coal resource occurrence.

Design of Ontology-Based Sharing Mechanism for Web Services Recommendation Learning Environment

NASA Astrophysics Data System (ADS)

Chen, Hong-Ren

The number of digital learning websites is growing as a result of advances in computer technology and new techniques in web page creation. These sites contain a wide variety of information but may be a source of confusion to learners who fail to find the information they are seeking. This has led to the concept of recommendation services to help learners acquire information and learning resources that suit their requirements. Learning content like this cannot be reused by other digital learning websites. A successful recommendation service that satisfies a certain learner must cooperate with many other digital learning objects so that it can achieve the required relevance. The study proposes using the theory of knowledge construction in ontology to make the sharing and reuse of digital learning resources possible. The learning recommendation system is accompanied by the recommendation of appropriate teaching materials to help learners enhance their learning abilities. A variety of diverse learning components scattered across the Internet can be organized through an ontological process so that learners can use information by storing, sharing, and reusing it.

A dynamic system with digital lock-in-photon-counting for pharmacokinetic diffuse fluorescence tomography

NASA Astrophysics Data System (ADS)

Yin, Guoyan; Zhang, Limin; Zhang, Yanqi; Liu, Han; Du, Wenwen; Ma, Wenjuan; Zhao, Huijuan; Gao, Feng

2018-02-01

Pharmacokinetic diffuse fluorescence tomography (DFT) can describe the metabolic processes of fluorescent agents in biomedical tissue and provide helpful information for tumor differentiation. In this paper, a dynamic DFT system was developed by employing digital lock-in-photon-counting with square wave modulation, which predominates in ultra-high sensitivity and measurement parallelism. In this system, 16 frequency-encoded laser diodes (LDs) driven by self-designed light source system were distributed evenly in the imaging plane and irradiated simultaneously. Meanwhile, 16 detection fibers collected emission light in parallel by the digital lock-in-photon-counting module. The fundamental performances of the proposed system were assessed with phantom experiments in terms of stability, linearity, anti-crosstalk as well as images reconstruction. The results validated the availability of the proposed dynamic DFT system.

PDS4 - Some Principles for Agile Data Curation

NASA Astrophysics Data System (ADS)

Hughes, J. S.; Crichton, D. J.; Hardman, S. H.; Joyner, R.; Algermissen, S.; Padams, J.

2015-12-01

PDS4, a research data management and curation system for NASA's Planetary Science Archive, was developed using principles that promote the characteristics of agile development. The result is an efficient system that produces better research data products while using less resources (time, effort, and money) and maximizes their usefulness for current and future scientists. The key principle is architectural. The PDS4 information architecture is developed and maintained independent of the infrastructure's process, application and technology architectures. The information architecture is based on an ontology-based information model developed to leverage best practices from standard reference models for digital archives, digital object registries, and metadata registries and capture domain knowledge from a panel of planetary science domain experts. The information model provides a sharable, stable, and formal set of information requirements for the system and is the primary source for information to configure most system components, including the product registry, search engine, validation and display tools, and production pipelines. Multi-level governance is also allowed for the effective management of the informational elements at the common, discipline, and project level. This presentation will describe the development principles, components, and uses of the information model and how an information model-driven architecture exhibits characteristics of agile curation including early delivery, evolutionary development, adaptive planning, continuous improvement, and rapid and flexible response to change.

Natural Language Processing.

ERIC Educational Resources Information Center

Chowdhury, Gobinda G.

2003-01-01

Discusses issues related to natural language processing, including theoretical developments; natural language understanding; tools and techniques; natural language text processing systems; abstracting; information extraction; information retrieval; interfaces; software; Internet, Web, and digital library applications; machine translation for…

Forest Resource Information System (FRIS)

NASA Technical Reports Server (NTRS)

1983-01-01

The technological and economical feasibility of using multispectral digital image data as acquired from the LANDSAT satellites in an ongoing operational forest information system was evaluated. Computer compatible multispectral scanner data secured from the LANDSAT satellites were demonstrated to be a significant contributor to ongoing information systems by providing the added dimensions of synoptic and repeat coverage of the Earth's surface. Major forest cover types of conifer, deciduous, mixed conifer-deciduous and non-forest, were classified well within the bounds of the statistical accuracy of the ground sample. Further, when overlayed with existing maps, the acreage of cover type retains a high level of positional integrity. Maps were digitized by a graphics design system, overlayed and registered onto LANDSAT imagery such that the map data with associated attributes were displayed on the image. Once classified, the analysis results were converted back to map form as a cover type of information. Existing tabular information as represented by inventory is registered geographically to the map base through a vendor provided data management system. The notion of a geographical reference base (map) providing the framework to which imagery and tabular data bases are registered and where each of the three functions of imagery, maps and inventory can be accessed singly or in combination is the very essence of the forest resource information system design.

Reference Model for an Open Archival Information System

NASA Technical Reports Server (NTRS)

1997-01-01

This document is a technical report for use in developing a consensus on what is required to operate a permanent, or indefinite long-term, archive of digital information. It may be useful as a starting point for a similar document addressing the indefinite long-term preservation of non-digital information. This report establishes a common framework of terms and concepts which comprise an Open Archival Information System (OAIS). It allows existing and future archives to be more meaningfully compared and contrasted. It provides a basis for further standardization of within an archival context and it should promote greater vendor awareness of, and support of , archival requirements. Through the process of normal evolution, it is expected that expansion, deletion, or modification to this document may occur. This report is therefore subject to CCSDS document management and change control procedures.

Propulsion control experience used in the Highly Integrated Digital Electronic Control (HIDEC) program

NASA Technical Reports Server (NTRS)

Myers, L. P.; Burcham, F. W., Jr.

1984-01-01

The highly integrated digital electronic control (HIDEC) program will integrate the propulsion and flight control systems on an F-15 airplane at NASA Ames Research Center's Dryden Flight Research Facility. Ames-Dryden has conducted several propulsion control programs that have contributed to the HIDEC program. The digital electronic engine control (DEEC) flight evaluation investigated the performance and operability of the F100 engine equipped with a full-authority digital electronic control system. Investigations of nozzle instability, fault detection and accommodation, and augmentor transient capability provided important information for the HIDEC program. The F100 engine model derivative (EMD) was also flown in the F-15 airplane, and airplane performance was significantly improved. A throttle response problem was found and solved with a software fix to the control logic. For the HIDEC program, the F100 EMD engines equipped with DEEC controls will be integrated with the digital flight control system. The control modes to be implemented are an integrated flightpath management mode and an integrated adaptive engine control system mode. The engine control experience that will be used in the HIDEC program is discussed.

Spatial digital database for the tectonic map of Southeast Arizona

USGS Publications Warehouse

map by Drewes, Harald; digital database by Fields, Robert A.; Hirschberg, Douglas M.; Bolm, Karen S.

2002-01-01

A spatial database was created for Drewes' (1980) tectonic map of southeast Arizona: this database supercedes Drewes and others (2001, ver. 1.0). Staff and a contractor at the U.S. Geological Survey in Tucson, Arizona completed an interim digital geologic map database for the east part of the map in 2001, made revisions to the previously released digital data for the west part of the map (Drewes and others, 2001, ver. 1.0), merged data files for the east and west parts, and added additional data not previously captured. Digital base map data files (such as topography, roads, towns, rivers and lakes) are not included: they may be obtained from a variety of commercial and government sources. This digital geospatial database is one of many being created by the U.S. Geological Survey as an ongoing effort to provide geologic information in a geographic information system (GIS) for use in spatial analysis. The resulting digital geologic map database can be queried in many ways to produce a variety of geologic maps and derivative products. Because Drewes' (1980) map sheets include additional text and graphics that were not included in this report, scanned images of his maps (i1109_e.jpg, i1109_w.jpg) are included as a courtesy to the reader. This database should not be used or displayed at any scale larger than 1:125,000 (for example, 1:100,000 or 1:24,000). The digital geologic map plot files (i1109_e.pdf and i1109_w.pdf) that are provided herein are representations of the database (see Appendix A). The map area is located in southeastern Arizona (fig. 1). This report describes the map units (from Drewes, 1980), the methods used to convert the geologic map data into a digital format, the ArcInfo GIS file structures and relationships, and explains how to download the digital files from the U.S. Geological Survey public access World Wide Web site on the Internet. The manuscript and digital data review by Helen Kayser (Information Systems Support, Inc.) is greatly appreciated.

Effects of digital phase-conjugate light intensity on time-reversal imaging through animal tissue.

PubMed

Toda, Sogo; Kato, Yuji; Kudo, Nobuki; Shimizu, Koichi

2018-04-01

For transillumination imaging of animal tissues, we have attempted to suppress the scattering effect in a turbid medium using the time-reversal principle of phase-conjugate light. We constructed a digital phase-conjugate system to enable intensity modulation and phase modulation. Using this system, we clarified the effectiveness of the intensity information for restoration of the original light distribution through a turbid medium. By varying the scattering coefficient of the medium, we clarified the limit of time-reversal ability with intensity information of the phase-conjugate light. Experiment results demonstrated the applicability of the proposed technique to animal tissue.

Land Use Planning Exercise Using Geographic Information Systems and Digital Soil Surveys

ERIC Educational Resources Information Center

Stout, Heidi M.; Lee, Brad D.

2004-01-01

Geographic information system (GIS) technology has become a valuable tool for environmental science professionals. By incorporating GIS into college-level course curricula, agricultural students become better qualified for employment opportunities. We have developed a case study-based laboratory exercise that introduces students to GIS and the…

Developing Adaptable Online Information Literacy Modules for a Learning Management System

ERIC Educational Resources Information Center

Mune, Christina; Goldman, Crystal; Higgins, Silke; Eby, Laurel; Chan, Emily K.; Crotty, Linda

2015-01-01

Higher education institutions increasingly utilize learning management systems (LMS) to teach courses and programs in hybrid or online-only formats. Providing information literacy instruction in these emerging digital environments poses challenges to librarians as the delivery of instruction requires familiarity with navigating an LMS and…

Exploration into technical procedures for vertical integration. [information systems

NASA Technical Reports Server (NTRS)

Michel, R. J.; Maw, K. D.

1979-01-01

Issues in the design and use of a digital geographic information system incorporating landuse, zoning, hazard, LANDSAT, and other data are discussed. An eleven layer database was generated. Issues in spatial resolution, registration, grid versus polygonal structures, and comparison of photointerpreted landuse to LANDSAT land cover are examined.

A conceptual persistent healthcare quality improvement process for software development management.

PubMed

Lin, Jen-Chiun; Su, Mei-Ju; Cheng, Po-Hsun; Weng, Yung-Chien; Chen, Sao-Jie; Lai, Jin-Shin; Lai, Feipei

2007-01-01

This paper illustrates a sustained conceptual service quality improvement process for the management of software development within a healthcare enterprise. Our proposed process is revised from Niland's healthcare quality information system (HQIS). This process includes functions to survey the satisfaction of system functions, describe the operation bylaws on-line, and provide on-demand training. To achieve these goals, we integrate five information systems in National Taiwan University Hospital, including healthcare information systems, health quality information system, requirement management system, executive information system, and digital learning system, to form a full Deming cycle. A preliminary user satisfaction survey showed that our outpatient information system scored an average of 71.31 in 2006.

High-fidelity video and still-image communication based on spectral information: natural vision system and its applications

NASA Astrophysics Data System (ADS)

Yamaguchi, Masahiro; Haneishi, Hideaki; Fukuda, Hiroyuki; Kishimoto, Junko; Kanazawa, Hiroshi; Tsuchida, Masaru; Iwama, Ryo; Ohyama, Nagaaki

2006-01-01

In addition to the great advancement of high-resolution and large-screen imaging technology, the issue of color is now receiving considerable attention as another aspect than the image resolution. It is difficult to reproduce the original color of subject in conventional imaging systems, and that obstructs the applications of visual communication systems in telemedicine, electronic commerce, and digital museum. To breakthrough the limitation of conventional RGB 3-primary systems, "Natural Vision" project aims at an innovative video and still-image communication technology with high-fidelity color reproduction capability, based on spectral information. This paper summarizes the results of NV project including the development of multispectral and multiprimary imaging technologies and the experimental investigations on the applications to medicine, digital archives, electronic commerce, and computer graphics.

Stabilometer Computerized Analog Recording System for Studying Gross Motor Skill Learning

ERIC Educational Resources Information Center

Chasey, William C., Jr.; And Others

1976-01-01

The stabilometer computerized analog recording system (SCARS) provides for storing analog and digital information on a single channel audio tape recorder at lower cost and greater versatility than other systems. (MB)

Using irreversible compression in digital radiology: a preliminary study of the opinions of radiologists

NASA Astrophysics Data System (ADS)

Seeram, Euclid

2006-03-01

The large volumes of digital images produced by digital imaging modalities in Radiology have provided the motivation for the development of picture archiving and communication systems (PACS) in an effort to provide an organized mechanism for digital image management. The development of more sophisticated methods of digital image acquisition (Multislice CT and Digital Mammography, for example), as well as the implementation and performance of PACS and Teleradiology systems in a health care environment, have created challenges in the area of image compression with respect to storing and transmitting digital images. Image compression can be reversible (lossless) or irreversible (lossy). While in the former, there is no loss of information, the latter presents concerns since there is a loss of information. This loss of information from diagnostic medical images is of primary concern not only to radiologists, but also to patients and their physicians. In 1997, Goldberg pointed out that "there is growing evidence that lossy compression can be applied without significantly affecting the diagnostic content of images... there is growing consensus in the radiologic community that some forms of lossy compression are acceptable". The purpose of this study was to explore the opinions of expert radiologists, and related professional organizations on the use of irreversible compression in routine practice The opinions of notable radiologists in the US and Canada are varied indicating no consensus of opinion on the use of irreversible compression in primary diagnosis, however, they are generally positive on the notion of the image storage and transmission advantages. Almost all radiologists are concerned with the litigation potential of an incorrect diagnosis based on irreversible compressed images. The survey of several radiology professional and related organizations reveals that no professional practice standards exist for the use of irreversible compression. Currently, the only standard for image compression is stated in the ACR's Technical Standards for Teleradiology and Digital Image Management.

LED instrument approach instruction display

NASA Technical Reports Server (NTRS)

Meredith, B. D.; Kelly, W. L., IV; Crouch, R. K.

1979-01-01

A display employing light emitting diodes (LED's) was developed to demonstrate the feasibility of such displays for presenting landing and navigation information to reduce the workload of general aviation pilots during IFR flight. The display consists of a paper tape reader, digital memory, control electronics, digital latches, and LED alphanumeric displays. A presentable digital countdown clock-timer is included as part of the system to provide a convenient means of monitoring time intervals for precise flight navigation. The system is a limited capability prototype assembled to test pilot reaction to such a device under simulated IFR operation. Pilot opinion indicates that the display is helpful in reducing the IFR pilots workload when used with a runway approach plate. However, the development of a compact, low power second generation display was recommended which could present several instructions simultaneously and provide information update capability. A microprocessor-based display could fulfill these requirements.

Enterprise digital assistants: the progression of wireless clinical computing.

PubMed

Bergeron, Bryan P

2002-01-01

By virtue of increasingly pervasive wireless connectivity, the proliferation of wireless handheld devices in clinical care is rapidly transforming the concept of the personal digital assistant (PDA) to the enterprise digital assistant (EDA). Wireless handheld devices are becoming extensions of the central hospital information system, in which it's understood that the health care enterprise, not the clinician carrying the information-dispensing device, owns the data. The practical implication for clinicians is that, despite the potential long-term benefits of seamless, just-in-time clinical data access, this paradigm shift portends decreased efficiency in the short term, as clinicians duplicate clinical data collection on private devices. Assuming eventual clinician acceptance, EDAs can form the basis of a national real-time clinical data acquisition system that ensures uniform prescribing, decision support, and diagnosis, and the means for tracking unusual disease presentation patterns that could be indicative of bioterrorism or natural disease outbreaks.

Storage and distribution of pathology digital images using integrated web-based viewing systems.

PubMed

Marchevsky, Alberto M; Dulbandzhyan, Ronda; Seely, Kevin; Carey, Steve; Duncan, Raymond G

2002-05-01

Health care providers have expressed increasing interest in incorporating digital images of gross pathology specimens and photomicrographs in routine pathology reports. To describe the multiple technical and logistical challenges involved in the integration of the various components needed for the development of a system for integrated Web-based viewing, storage, and distribution of digital images in a large health system. An Oracle version 8.1.6 database was developed to store, index, and deploy pathology digital photographs via our Intranet. The database allows for retrieval of images by patient demographics or by SNOMED code information. The Intranet of a large health system accessible from multiple computers located within the medical center and at distant private physician offices. The images can be viewed using any of the workstations of the health system that have authorized access to our Intranet, using a standard browser or a browser configured with an external viewer or inexpensive plug-in software, such as Prizm 2.0. The images can be printed on paper or transferred to film using a digital film recorder. Digital images can also be displayed at pathology conferences by using wireless local area network (LAN) and secure remote technologies. The standardization of technologies and the adoption of a Web interface for all our computer systems allows us to distribute digital images from a pathology database to a potentially large group of users distributed in multiple locations throughout a large medical center.

Air Ground Integration and the Brigade Combat Team

DTIC Science & Technology

2013-06-13

Theater Air Control System TADIL-J Tactical Digital Information Link-J TAGS Theater Air Ground System TAIS Tactical Air Integration System TBMCS Theater...during planning and execution. This system interacts with the Theater Battle Management Core System ( TBMCS ) used by the JAOC to build and disseminate...control nodes within the AAGS, in conjunction with the interoperability with the TBMCS and Army mission command systems facilitates information flow during

Digital radiography: a survey of pediatric dentists.

PubMed

Russo, Julie M; Russo, James A; Guelmann, Marcio

2006-01-01

The purpose of this study was to: (1) determine the popularity of digital radiography among members of the American Academy of Pediatric Dentistry (AAPD); and (2) report the most common systems in use. An AAPD-approved, voluntary, and anonymous electronic survey was developed and sent to 923 board certified pediatric dentists. Years in practice and in-office x-ray technology (digital or conventional) were inquired about initially. If negative for the use of digital radiography, future consideration for converting to digital radiography was ascertained. For positive responses, more in-depth information was requested. Information on type of system (sensor or phosphor plate), user friendliness, diagnostic ability, patient's comfort, general costs, durability, and parental and overall satisfaction was collected. For most of the questions, a 5-point assessment scale was used. Opportunity for additional comments was provided upon survey completion. Data was analyzed using descriptive statistics. A 32% (296/923) response rate was obtained. Twenty-six percent of practitioners (78/296) implemented digital radiography in their practices, whereas 71% considered future acquisition. Similar distribution for sensor and phosphor plate users was found. Sensor technology was reported to produce faster images, but was less tolerable by young children due to size and thickness. Phosphor plates were considered more children friendly, less expensive, and less durable. Parental satisfaction was very high with great marketing value. Picture quality was comparable to conventional film. Overall, digital radiography users would recommend it to other pediatric dentists. Digital radiography is not yet popular among pediatric dentists. Cost reduction and technology advancement may enhance utilization.

GIS Integration for Quantitatively Determining the Capabilities of Five Remote Sensors for Resource Exploration

NASA Technical Reports Server (NTRS)

Pascucci, R. F.; Smith, A.

1982-01-01

To assist the U.S. Geological Survey in carrying out a Congressional mandate to investigate the use of side-looking airborne radar (SLAR) for resources exploration, a research program was conducted to define the contribution of SLAR imagery to structural geologic mapping and to compare this with contributions from other remote sensing systems. Imagery from two SLAR systems and from three other remote sensing systems was interpreted, and the resulting information was digitized, quantified and intercompared using a computer-assisted geographic information system (GIS). The study area covers approximately 10,000 square miles within the Naval Petroleum Reserve, Alaska, and is situated between the foothills of the Brooks Range and the North Slope. The principal objectives were: (1) to establish quantitatively, the total information contribution of each of the five remote sensing systems to the mapping of structural geology; (2) to determine the amount of information detected in common when the sensors are used in combination; and (3) to determine the amount of unique, incremental information detected by each sensor when used in combination with others. The remote sensor imagery that was investigated included real-aperture and synthetic-aperture radar imagery, standard and digitally enhanced LANDSAT MSS imagery, and aerial photos.

Optimal Data Transmission on MIMO OFDM Channels

DTIC Science & Technology

2008-12-01

Channel State Information dB decibel DFT Discrete Fourier Transform DWTS Digital Wideband Transmission System ETSI European Telecommunications...me facultaram durante a minha infância e juventude , que em conjunto com seu permanente apoio e amor me permitiram sonhar e voar tão alto. Agradeço...transmitter, it is far simpler to build such a system using an IDFT chip, generate the overall OFDM signal in baseband and digital format, and finally

Digital Images on the DIME

NASA Technical Reports Server (NTRS)

2003-01-01

With NASA on its side, Positive Systems, Inc., of Whitefish, Montana, is veering away from the industry standards defined for producing and processing remotely sensed images. A top developer of imaging products for geographic information system (GIS) and computer-aided design (CAD) applications, Positive Systems is bucking traditional imaging concepts with a cost-effective and time-saving software tool called Digital Images Made Easy (DIME(trademark)). Like piecing a jigsaw puzzle together, DIME can integrate a series of raw aerial or satellite snapshots into a single, seamless panoramic image, known as a 'mosaic.' The 'mosaicked' images serve as useful backdrops to GIS maps - which typically consist of line drawings called 'vectors' - by allowing users to view a multidimensional map that provides substantially more geographic information.

Analyzing long-term changes in vegetation with geographic information system and remotely sensed data

Treesearch

Louis. R. Iverson; Paul. G. Risser; Paul. G. Risser

1987-01-01

Geographic information systems and remote sensing techniques are powerful tools in the analysis of long-term changes in vegetation and land use, especially because spatial information from two or more time intervals can be compared more readily than by manual methods. A primary restriction is the paucity of data that has been digitized from earlier periods. The...

Balancing Efficiency and Effectiveness for Fusion-Based Search Engines in the "Big Data" Environment

ERIC Educational Resources Information Center

Li, Jieyu; Huang, Chunlan; Wang, Xiuhong; Wu, Shengli

2016-01-01

Introduction: In the big data age, we have to deal with a tremendous amount of information, which can be collected from various types of sources. For information search systems such as Web search engines or online digital libraries, the collection of documents becomes larger and larger. For some queries, an information search system needs to…

Library Functions, Scholarly Communication, and the Foundation of the Digital Library: Laying Claim to the Control Zone.

ERIC Educational Resources Information Center

Atkinson, Ross

1996-01-01

Discussion of academic libraries and online systems focuses on core library services and a digital library which could serve as an alternative publishing mechanism for specialized scholarly communication. Highlights include adding value to sources of information; conflicts, including those with commercial publishers; and standardization and…

Development of a LiDAR derived digital elevation model (DEM) as Input to a METRANS geographic information system (GIS).

DOT National Transportation Integrated Search

2011-05-01

This report describes an assessment of digital elevation models (DEMs) derived from : LiDAR data for a subset of the Ports of Los Angeles and Long Beach. A methodology : based on Monte Carlo simulation was applied to investigate the accuracy of DEMs ...

Geographic information system (GIS)-based maps of Appalachian basin oil and gas fields: Chapter C.2 in Coal and petroleum resources in the Appalachian basin: distribution, geologic framework, and geochemical character

USGS Publications Warehouse

Ryder, Robert T.; Kinney, Scott A.; Suitt, Stephen E.; Merrill, Matthew D.; Trippi, Michael H.; Ruppert, Leslie F.; Ryder, Robert T.

2014-01-01

In 2006 and 2007, the greenline Appalachian basin field maps were digitized under the supervision of Scott Kinney and converted to geographic information system (GIS) files for chapter I.1 (this volume). By converting these oil and gas field maps to a digital format and maintaining the field names where noted, they are now available for a variety of oil and gas and possibly carbon-dioxide sequestration projects. Having historical names assigned to known digitized conventional fields provides a convenient classification scheme into which cumulative production and ultimate field-size databases can be organized. Moreover, as exploratory and development drilling expands across the basin, many previously named fields that were originally treated as conventional fields have evolved into large, commonly unnamed continuous-type accumulations. These new digital maps will facilitate a comparison between EUR values from recently drilled, unnamed parts of continuous accumulations and EUR values from named fields discovered early during the exploration cycle of continuous accumulations.

Digimarc MediaBridge: the birth of a consumer product from concept to commercial application

NASA Astrophysics Data System (ADS)

Perry, Burt; MacIntosh, Brian; Cushman, David

2002-04-01

This paper examines the issues encountered in the development and commercial deployment of a system based on digital watermarking technology. The paper provides an overview of the development of digital watermarking technology and the first applications to use the technology. It also looks at how we took the concept of digital watermarking as a communications channel within a digital environment and applied it to the physical print world to produce the Digimarc MediaBridge product. We describe the engineering tradeoffs that were made to balance competing requirements of watermark robustness, image quality, embedding process, detection speed and end user ease of use. Today, the Digimarc MediaBridge product links printed materials to auxiliary information about the content, via the Internet, to provide enhanced informational marketing, promotion, advertising and commerce opportunities.

Explosive Transient Camera (ETC) Program

DTIC Science & Technology

1991-10-01

VOLTAGES 4.- VIDEO OUT CCD CLOCKING UNIT UUPSTAIRS" ELECTRONICS AND ANALOG TO DIGITAL IPR OCECSSER I COMMANDS TO DATA AND STATUS INSTRUMENT INFORMATION I...and transmits digital video and status information to the "downstairs" system. The clocking unit and regulator/driver board are the only CCD dependent...A. 1001, " Video Cam-era’CC’" tandari Piells" (1(P’ll m-norartlum, unpublished). Condon,, J.J., Puckpan, M.A., and Vachalski, J. 1970, A. J., 9U, 1149

Image based automatic water meter reader

NASA Astrophysics Data System (ADS)

Jawas, N.; Indrianto

2018-01-01

Water meter is used as a tool to calculate water consumption. This tool works by utilizing water flow and shows the calculation result with mechanical digit counter. Practically, in everyday use, an operator will manually check the digit counter periodically. The Operator makes logs of the number shows by water meter to know the water consumption. This manual operation is time consuming and prone to human error. Therefore, in this paper we propose an automatic water meter digit reader from digital image. The digits sequence is detected by utilizing contour information of the water meter front panel.. Then an OCR method is used to get the each digit character. The digit sequence detection is an important part of overall process. It determines the success of overall system. The result shows promising results especially in sequence detection.

Travel Vaccines Enter the Digital Age: Creating a Virtual Immunization Record

PubMed Central

Wilson, Kumanan; Atkinson, Katherine M.; Bell, Cameron P.

2016-01-01

At present, proof of immunization against diseases such as yellow fever is required at some international borders in concordance with the International Health Regulations. The current standard, the International Certificate of Vaccination or Prophylaxis (ICVP), has limitations as a paper record including the possibility of being illegible, misplaced, or damaged. We believe that a complementary, digital record would offer advantages to public health and travelers alike. These include enhanced availability and reliability, potential to include lot specific information, and integration with immunization information systems. Challenges exist in implementation, particularly pertaining to verification at border crossings. We describe a potential course for the development and implementation of a digital ICVP record. PMID:26711516

LANDSAT information for state planning

NASA Technical Reports Server (NTRS)

Faust, N. L.; Spann, G. W.

1977-01-01

The transfer of remote sensing technology for the digital processing of LANDSAT data to state and local agencies in Georgia and other southeastern states is discussed. The project consists of a series of workshops, seminars, and demonstration efforts, and transfer of NASA-developed hardware concepts and computer software to state agencies. Throughout the multi-year effort, digital processing techniques have been emphasized classification algorithms. Software for LANDSAT data rectification and processing have been developed and/or transferred. A hardware system is available at EES (engineering experiment station) to allow user interactive processing of LANDSAT data. Seminars and workshops emphasize the digital approach to LANDSAT data utilization and the system improvements scheduled for LANDSATs C and D. Results of the project indicate a substantially increased awareness of the utility of digital LANDSAT processing techniques among the agencies contracted throughout the southeast. In Georgia, several agencies have jointly funded a program to map the entire state using digitally processed LANDSAT data.

In-Factory Learning - Qualification For The Factory Of The Future

NASA Astrophysics Data System (ADS)

Quint, Fabian; Mura, Katharina; Gorecky, Dominic

2015-07-01

The Industry 4.0 vision anticipates that internet technologies will find their way into future factories replacing traditional components by dynamic and intelligent cyber-physical systems (CPS) that combine the physical objects with their digital representation. Reducing the gap between the real and digital world makes the factory environment more flexible, more adaptive, but also more complex for the human workers. Future workers require interdisciplinary competencies from engineering, information technology, and computer science in order to understand and manage the diverse interrelations between physical objects and their digital counterpart. This paper proposes a mixed-reality based learning environment, which combines physical objects and visualisation of digital content via Augmented Reality. It uses reality-based interaction in order to make the dynamic interrelations between real and digital factory visible and tangible. We argue that our learning system does not work as a stand-alone solution, but should fit into existing academic and advanced training curricula.

Precise color images a high-speed color video camera system with three intensified sensors

NASA Astrophysics Data System (ADS)

Oki, Sachio; Yamakawa, Masafumi; Gohda, Susumu; Etoh, Takeharu G.

1999-06-01

High speed imaging systems have been used in a large field of science and engineering. Although the high speed camera systems have been improved to high performance, most of their applications are only to get high speed motion pictures. However, in some fields of science and technology, it is useful to get some other information, such as temperature of combustion flame, thermal plasma and molten materials. Recent digital high speed video imaging technology should be able to get such information from those objects. For this purpose, we have already developed a high speed video camera system with three-intensified-sensors and cubic prism image splitter. The maximum frame rate is 40,500 pps (picture per second) at 64 X 64 pixels and 4,500 pps at 256 X 256 pixels with 256 (8 bit) intensity resolution for each pixel. The camera system can store more than 1,000 pictures continuously in solid state memory. In order to get the precise color images from this camera system, we need to develop a digital technique, which consists of a computer program and ancillary instruments, to adjust displacement of images taken from two or three image sensors and to calibrate relationship between incident light intensity and corresponding digital output signals. In this paper, the digital technique for pixel-based displacement adjustment are proposed. Although the displacement of the corresponding circle was more than 8 pixels in original image, the displacement was adjusted within 0.2 pixels at most by this method.

Programmable calculator as a data system controller

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barth, A.W.; Strasburg, A.C.

Digital data techniques are in common use for analysis of analog information obtained in various tests, and systems have been developed which use a minicomputer as the central controller and data processor. Now, microprocessors allow new design approaches at considerably less cost. This report outlines an approach to system design based on the use of a programmable calculator as the data system controller. A block diagram of the calculator-controlled data system is shown. It was found that the programmable calculator provides a viable alternative to minicomputers or microprocessors for the development laboratory requiring digital data processing. 3 figures. (RWR)

Techniques for digital enhancement of Landsat MSS data using an Apple II+ microcomputer

NASA Technical Reports Server (NTRS)

Harrington, J. A., Jr.; Cartin, K. F.

1984-01-01

The information provided by remotely sensed data collected from orbiting platforms has been useful in many research fields. Particularly convenient for evaluation are generally digital data stored on computer compatible tapes (CCT's). The major advantages of CCT's are the quality of the data and the accessibility to computer manipulation. Minicomputer systems are widely used for the required computer processing operations. However, microprocessor-related technological advances make it now possible to process CCT data with computing systems which can be obtained at a much lower price than minicomputer systems. A detailed description is provided of the design considerations of a microcomputer-based Digital Image Analysis System (DIAS). Particular attention is given to the algorithms which are incorporated for eighter edge enhancement or smoothing Landsat multispectral scanner data.

Tools virtualization for command and control systems

NASA Astrophysics Data System (ADS)

Piszczek, Marek; Maciejewski, Marcin; Pomianek, Mateusz; Szustakowski, Mieczysław

2017-10-01

Information management is an inseparable part of the command process. The result is that the person making decisions at the command post interacts with data providing devices in various ways. Tools virtualization process can introduce a number of significant modifications in the design of solutions for management and command. The general idea involves replacing physical devices user interface with their digital representation (so-called Virtual instruments). A more advanced level of the systems "digitalization" is to use the mixed reality environments. In solutions using Augmented reality (AR) customized HMI is displayed to the operator when he approaches to each device. Identification of device is done by image recognition of photo codes. Visualization is achieved by (optical) see-through head mounted display (HMD). Control can be done for example by means of a handheld touch panel. Using the immersive virtual environment, the command center can be digitally reconstructed. Workstation requires only VR system (HMD) and access to information network. Operator can interact with devices in such a way as it would perform in real world (for example with the virtual hands). Because of their procedures (an analysis of central vision, eye tracking) MR systems offers another useful feature of reducing requirements for system data throughput. Due to the fact that at the moment we focus on the single device. Experiments carried out using Moverio BT-200 and SteamVR systems and the results of experimental application testing clearly indicate the ability to create a fully functional information system with the use of mixed reality technology.

Bringing Superconductor Digital Technology to the Market Place

NASA Astrophysics Data System (ADS)

Nisenoff, Martin

The unique properties of superconductivity can be exploited to provide the ultimate in electronic technology for systems such as ultra-precise analogue-to-digital and digital-to-analogue converters, precise DC and AC voltage standards, ultra high speed logic circuits and systems (both digital and hybrid analogue-digital systems), and very high throughput network routers and supercomputers which would have superior electrical performance at lower overall electrical power consumption compared to systems with comparable performance which are fabricated using conventional room temperature technologies. This potential for high performance electronics with reduced power consumption would have a positive impact on slowing the increase in the demand for electrical utility power by the information technology community on the overall electrical power grid. However, before this technology can be successfully brought to the commercial market place, there must be an aggressive investment of resources and funding to develop the required infrastructure needed to yield these high performance superconductor systems, which will be reliable and available at low cost. The author proposes that it will require a concerted effort by the superconductor and cryogenic communities to bring this technology to the commercial market place or make it available for widespread use in scientific instrumentation.

Improved stereo matching applied to digitization of greenhouse plants

NASA Astrophysics Data System (ADS)

Zhang, Peng; Xu, Lihong; Li, Dawei; Gu, Xiaomeng

2015-03-01

The digitization of greenhouse plants is an important aspect of digital agriculture. Its ultimate aim is to reconstruct a visible and interoperable virtual plant model on the computer by using state-of-the-art image process and computer graphics technologies. The most prominent difficulties of the digitization of greenhouse plants include how to acquire the three-dimensional shape data of greenhouse plants and how to carry out its realistic stereo reconstruction. Concerning these issues an effective method for the digitization of greenhouse plants is proposed by using a binocular stereo vision system in this paper. Stereo vision is a technique aiming at inferring depth information from two or more cameras; it consists of four parts: calibration of the cameras, stereo rectification, search of stereo correspondence and triangulation. Through the final triangulation procedure, the 3D point cloud of the plant can be achieved. The proposed stereo vision system can facilitate further segmentation of plant organs such as stems and leaves; moreover, it can provide reliable digital samples for the visualization of greenhouse tomato plants.

Smart Camera Technology Increases Quality

NASA Technical Reports Server (NTRS)

2004-01-01

When it comes to real-time image processing, everyone is an expert. People begin processing images at birth and rapidly learn to control their responses through the real-time processing of the human visual system. The human eye captures an enormous amount of information in the form of light images. In order to keep the brain from becoming overloaded with all the data, portions of an image are processed at a higher resolution than others, such as a traffic light changing colors. changing colors. In the same manner, image processing products strive to extract the information stored in light in the most efficient way possible. Digital cameras available today capture millions of pixels worth of information from incident light. However, at frame rates more than a few per second, existing digital interfaces are overwhelmed. All the user can do is store several frames to memory until that memory is full and then subsequent information is lost. New technology pairs existing digital interface technology with an off-the-shelf complementary metal oxide semiconductor (CMOS) imager to provide more than 500 frames per second of specialty image processing. The result is a cost-effective detection system unlike any other.

Serendipia: Castilla-La Mancha telepathology network

PubMed Central

Peces, Carlos; García-Rojo, Marcial; Sacristán, José; Gallardo, Antonio José; Rodríguez, Ambrosio

2008-01-01

Nowadays, there is no standard solution for acquiring, archiving and communication of Pathology digital images. In addition, there does not exist any commercial Pathology Information System (LIS) that can manage the relationship between the reports generated by the pathologist and their corresponding images. Due to this situation, the Healthcare Service of Castilla-La Mancha decided to create a completely digital Pathology Department, the project is called SERENDIPIA. SERENDIPIA project provides all the necessary image acquiring devices needed to cover all kind of images that can be generated in a Pathology Department. In addition, in the SERENDIPIA project an Information System was developed that allows, on the one hand, it to cover the daily workflow of a Pathology Department (including the storage and the manage of the reports and its images), and, on the other hand, the Information System provides a WEB telepathology portal with collaborative tools like second opinion. PMID:18673519

Enhanced TCAS 2/CDTI traffic Sensor digital simulation model and program description

NASA Technical Reports Server (NTRS)

Goka, T.

1984-01-01

Digital simulation models of enhanced TCAS 2/CDTI traffic sensors are developed, based on actual or projected operational and performance characteristics. Two enhanced Traffic (or Threat) Alert and Collision Avoidance Systems are considered. A digital simulation program is developed in FORTRAN. The program contains an executive with a semireal time batch processing capability. The simulation program can be interfaced with other modules with a minimum requirement. Both the traffic sensor and CAS logic modules are validated by means of extensive simulation runs. Selected validation cases are discussed in detail, and capabilities and limitations of the actual and simulated systems are noted. The TCAS systems are not specifically intended for Cockpit Display of Traffic Information (CDTI) applications. These systems are sufficiently general to allow implementation of CDTI functions within the real systems' constraints.

Natural Resource Information System. Volume 2: System operating procedures and instructions

NASA Technical Reports Server (NTRS)

1972-01-01

A total computer software system description is provided for the prototype Natural Resource Information System designed to store, process, and display data of maximum usefulness to land management decision making. Program modules are described, as are the computer file design, file updating methods, digitizing process, and paper tape conversion to magnetic tape. Operating instructions for the system, data output, printed output, and graphic output are also discussed.

Digital Collections, Digital Libraries and the Digitization of Cultural Heritage Information.

ERIC Educational Resources Information Center

Lynch, Clifford

2002-01-01

Discusses the development of digital collections and digital libraries. Topics include digitization of cultural heritage information; broadband issues; lack of compelling content; training issues; types of materials being digitized; sustainability; digital preservation; infrastructure; digital images; data mining; and future possibilities for…

Geographic Information System Data Analysis

NASA Technical Reports Server (NTRS)

Billings, Chad; Casad, Christopher; Floriano, Luis G.; Hill, Tracie; Johnson, Rashida K.; Locklear, J. Mark; Penn, Stephen; Rhoulac, Tori; Shay, Adam H.; Taylor, Antone;

A Patient-Centered Framework for Evaluating Digital Maturity of Health Services: A Systematic Review

PubMed Central

Callahan, Ryan; Darzi, Ara; Mayer, Erik

2016-01-01

Background Digital maturity is the extent to which digital technologies are used as enablers to deliver a high-quality health service. Extensive literature exists about how to assess the components of digital maturity, but it has not been used to design a comprehensive framework for evaluation. Consequently, the measurement systems that do exist are limited to evaluating digital programs within one service or care setting, meaning that digital maturity evaluation is not accounting for the needs of patients across their care pathways. Objective The objective of our study was to identify the best methods and metrics for evaluating digital maturity and to create a novel, evidence-based tool for evaluating digital maturity across patient care pathways. Methods We systematically reviewed the literature to find the best methods and metrics for evaluating digital maturity. We searched the PubMed database for all papers relevant to digital maturity evaluation. Papers were selected if they provided insight into how to appraise digital systems within the health service and if they indicated the factors that constitute or facilitate digital maturity. Papers were analyzed to identify methodology for evaluating digital maturity and indicators of digitally mature systems. We then used the resulting information about methodology to design an evaluation framework. Following that, the indicators of digital maturity were extracted and grouped into increasing levels of maturity and operationalized as metrics within the evaluation framework. Results We identified 28 papers as relevant to evaluating digital maturity, from which we derived 5 themes. The first theme concerned general evaluation methodology for constructing the framework (7 papers). The following 4 themes were the increasing levels of digital maturity: resources and ability (6 papers), usage (7 papers), interoperability (3 papers), and impact (5 papers). The framework includes metrics for each of these levels at each stage of the typical patient care pathway. Conclusions The framework uses a patient-centric model that departs from traditional service-specific measurements and allows for novel insights into how digital programs benefit patients across the health system. Trial Registration N/A PMID:27080852

City of Flagstaff Project: Ground Water Resource Evaluation, Remote Sensing Component

USGS Publications Warehouse

Chavez, Pat S.; Velasco, Miguel G.; Bowell, Jo-Ann; Sides, Stuart C.; Gonzalez, Rosendo R.; Soltesz, Deborah L.

1996-01-01

Many regions, cities, and towns in the Western United States need new or expanded water resources because of both population growth and increased development. Any tools or data that can help in the evaluation of an area's potential water resources must be considered for this increasingly critical need. Remotely sensed satellite images and subsequent digital image processing have been under-utilized in ground water resource evaluation and exploration. Satellite images can be helpful in detecting and mapping an area's regional structural patterns, including major fracture and fault systems, two important geologic settings for an area's surface to ground water relations. Within the United States Geological Survey's (USGS) Flagstaff Field Center, expertise and capabilities in remote sensing and digital image processing have been developed over the past 25 years through various programs. For the City of Flagstaff project, this expertise and these capabilities were combined with traditional geologic field mapping to help evaluate ground water resources in the Flagstaff area. Various enhancement and manipulation procedures were applied to the digital satellite images; the results, in both digital and hardcopy format, were used for field mapping and analyzing the regional structure. Relative to surface sampling, remotely sensed satellite and airborne images have improved spatial coverage that can help study, map, and monitor the earth surface at local and/or regional scales. Advantages offered by remotely sensed satellite image data include: 1. a synoptic/regional view compared to both aerial photographs and ground sampling, 2. cost effectiveness, 3. high spatial resolution and coverage compared to ground sampling, and 4. relatively high temporal coverage on a long term basis. Remotely sensed images contain both spectral and spatial information. The spectral information provides various properties and characteristics about the surface cover at a given location or pixel (that is, vegetation and/or soil type). The spatial information gives the distribution, variation, and topographic relief of the cover types from pixel to pixel. Therefore, the main characteristics that determine a pixel's brightness/reflectance and, consequently, the digital number (DN) assigned to the pixel, are the physical properties of the surface and near surface, the cover type, and the topographic slope. In this application, the ability to detect and map lineaments, especially those related to fractures and faults, is critical. Therefore, the extraction of spatial information from the digital images was of prime interest in this project. The spatial information varies among the different spectral bands available; in particular, a near infrared spectral band is better than a visible band when extracting spatial information in highly vegetated areas. In this study, both visible and near infrared bands were analyzed and used to extract the desired spatial information from the images. The wide swath coverage of remotely sensed satellite digital images makes them ideal for regional analysis and mapping. Since locating and mapping highly fractured and faulted areas is a major requirement for ground water resource evaluation and exploration this aspect of satellite images was considered critical; it allowed us to stand back (actually up about 440 miles), look at, and map the regional structural setting of the area. The main focus of the remote sensing and digital image processing component of this project was to use both remotely sensed digital satellite images and a Digital Elevation Model (DEM) to extract spatial information related to the structural and topographic patterns in the area. The data types used were digital satellite images collected by the United States' Landsat Thematic Mapper (TM) and French Systeme Probatoire d'Observation de laTerre (SPOT) imaging systems, along with a DEM of the Flagstaff region. The USGS Mini Image Processing Sy

Digital Architecture – Results From a Gap Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna Helene; Thomas, Kenneth David; Fitzgerald, Kirk

The digital architecture is defined as a collection of IT capabilities needed to support and integrate a wide-spectrum of real-time digital capabilities for nuclear power plant performance improvements. The digital architecture can be thought of as an integration of the separate I&C and information systems already in place in NPPs, brought together for the purpose of creating new levels of automation in NPP work activities. In some cases, it might be an extension of the current communication systems, to provide digital communications where they are currently analog only. This collection of IT capabilities must in turn be based on amore » set of user requirements that must be supported for the interconnected technologies to operate in an integrated manner. These requirements, simply put, are a statement of what sorts of digital work functions will be exercised in a fully-implemented seamless digital environment and how much they will be used. The goal of the digital architecture research is to develop a methodology for mapping nuclear power plant operational and support activities into the digital architecture, which includes the development of a consensus model for advanced information and control architecture. The consensus model should be developed at a level of detail that is useful to the industry. In other words, not so detailed that it specifies specific protocols and not so vague that it is only provides a high level description of technology. The next step towards the model development is to determine the current state of digital architecture at typical NPPs. To investigate the current state, the researchers conducted a gap analysis to determine to what extent the NPPs can support the future digital technology environment with their existing I&C and IT structure, and where gaps exist with respect to the full deployment of technology over time. The methodology, result, and conclusions from the gap analysis are described in this report.« less

Distributed Multimedia Computing: An Assessment of the State of the Art.

ERIC Educational Resources Information Center

Williams, Neil; And Others

1991-01-01

Describes multimedia computing and the characteristics of multimedia information. Trends in information technology are reviewed; distributed multimedia computing is explained; media types are described, including digital media; and multimedia applications are examined, including office systems, documents, information storage and retrieval,…

Timeliness in the notification of spotted fever in Brazil: Evaluating compulsory reporting strategies and digital disease detection.

PubMed

de Oliveira, Stefan Vilges; Angerami, Rodrigo Nogueira

2018-05-03

Spotted fever caused by rickettsial species, the most important tick-borne disease. In Brazil, is nationwide communicable compulsory disease to the Ministry of Health. Since 2007, all suspected cases of spotted fever have been integrated into the Notifiable Diseases Information System (SINAN). In this descriptive study we evaluate the timeliness (expressed in number of days between time of clinical suspicion and reporting) of the compulsory notification of spotted fever cases in SINAN and the strategy for digital disease detection (DDD). It was analysed the information from the SINAN and from the digital detection strategy used by ProMED-Português. Results show that detection by the SINAN system was more efficient than Promed-Português, reporting 20.5 days earlier 90.4% of evaluated suspected cases. The surveillance strategy based on the mandatory case reporting using SINAN has proven to be more timely, but DDD can be considered as a complementary strategy providing a more disseminate epidemiological information to wide range readership globally. Copyright © 2018. Published by Elsevier Ltd.

Performance Effects of Display Incogruity in a Digital and Analog Clock Reading Task

NASA Technical Reports Server (NTRS)

Comstock, J. Raymond, Jr.; Derks, Peter L.

2004-01-01

In an era of increasing automation, it is important to design displays and input devices that minimize human error. In this context, information concerning the human response to the detection of incongruous information is important. Such incongruous information can be operationalized as unexpected (perhaps erroneous) information on which a decision by the human or operation by an automated system is based. In the aviation environment, decision making when faced with inadequate, incomplete, or incongruous information may occur in a failure scenario. An additional challenge facing the human operator in automated environments is maintaining alertness or vigilance. The vigilance issue is of particular concern as a factor that may interact with performance when faced with inadequate, incomplete, or incongruous information. From the literature on eye-scan behavior we know that the time spent looking at a particular display or indicator is a function of the type of information one is trying to discern from the display. For example, quick glances are all it takes for confirming that an indicator is in a normal position or range, whereas a continuous look of several seconds may be required for confirmation that a complex control input is having the desired effect. Important to consider is that while an extended look takes place, visual input from other sources may be missed. Much like an extended look, the interpretation of incongruous information may require extra time. The present experiment was designed to explore the performance consequences of a decision making task when incongruous information was presented. For this experiment a display incongruity was created on a subset of trials of a clock reading laboratory task. Display incongruity was made possible through presentation of 'impossible' times (e.g. 1:65 or 11:90). Subjects made 'same' 'different' decisions and keyboard responses to pairings of Analog-Analog (AA), Digital-Digital (DD), and Analog- Digital (AD), display combinations. For trials during which display incongruities were not presented, based on prior research comparing digital and analog clock displays, it would be expected that the Digital-Digital condition would result in the shortest response times and the Analog-Analog and Analog-Digital conditions would have longer response times. The performance consequence expected on trials with incongruous times would be very long response times.

Trends in Interactive Information Systems for Earth Observation from Space: Towards a Global, Digital Image Library Service.

ERIC Educational Resources Information Center

Kingwell, Jeff

1996-01-01

Data management systems for earth science information gathered from space are being affected by two related trends: (1) a move from ad hoc systems established for particular projects to a longer lasting national and global infrastructure; and (2) an emphasis on efficient service delivery in an era of diminishing resources for national space…

Context-Based Tourism Information Filtering with a Semantic Rule Engine

PubMed Central

Lamsfus, Carlos; Martin, David; Alzua-Sorzabal, Aurkene; López-de-Ipiña, Diego; Torres-Manzanera, Emilio

2012-01-01

This paper presents the CONCERT framework, a push/filter information consumption paradigm, based on a rule-based semantic contextual information system for tourism. CONCERT suggests a specific insight of the notion of context from a human mobility perspective. It focuses on the particular characteristics and requirements of travellers and addresses the drawbacks found in other approaches. Additionally, CONCERT suggests the use of digital broadcasting as push communication technology, whereby tourism information is disseminated to mobile devices. This information is then automatically filtered by a network of ontologies and offered to tourists on the screen. The results obtained in the experiments carried out show evidence that the information disseminated through digital broadcasting can be manipulated by the network of ontologies, providing contextualized information that produces user satisfaction. PMID:22778584

Context-based tourism information filtering with a semantic rule engine.

PubMed

Lamsfus, Carlos; Martin, David; Alzua-Sorzabal, Aurkene; López-de-Ipiña, Diego; Torres-Manzanera, Emilio

2012-01-01

This paper presents the CONCERT framework, a push/filter information consumption paradigm, based on a rule-based semantic contextual information system for tourism. CONCERT suggests a specific insight of the notion of context from a human mobility perspective. It focuses on the particular characteristics and requirements of travellers and addresses the drawbacks found in other approaches. Additionally, CONCERT suggests the use of digital broadcasting as push communication technology, whereby tourism information is disseminated to mobile devices. This information is then automatically filtered by a network of ontologies and offered to tourists on the screen. The results obtained in the experiments carried out show evidence that the information disseminated through digital broadcasting can be manipulated by the network of ontologies, providing contextualized information that produces user satisfaction.

Prioritizing Measures of Digital Patient Engagement: A Delphi Expert Panel Study

PubMed Central

2017-01-01

Background Establishing a validated scale of patient engagement through use of information technology (ie, digital patient engagement) is the first step to understanding its role in health and health care quality, outcomes, and efficient implementation by health care providers and systems. Objective The aim of this study was to develop and prioritize measures of digital patient engagement based on patients’ use of the US Department of Veterans Affairs (VA)’s MyHealtheVet (MHV) portal, focusing on the MHV/Blue Button and Secure Messaging functions. Methods We aligned two models from the information systems and organizational behavior literatures to create a theory-based model of digital patient engagement. On the basis of this model, we conducted ten key informant interviews to identify potential measures from existing VA studies and consolidated the measures. We then conducted three rounds of modified Delphi rating by 12 national eHealth experts via Web-based surveys to prioritize the measures. Results All 12 experts completed the study’s three rounds of modified Delphi ratings, resulting in two sets of final candidate measures representing digital patient engagement for Secure Messaging (58 measures) and MHV/Blue Button (71 measures). These measure sets map to Donabedian’s three types of quality measures: (1) antecedents (eg, patient demographics); (2) processes (eg, a novel measure of Web-based care quality); and (3) outcomes (eg, patient engagement). Conclusions This national expert panel study using a modified Delphi technique prioritized candidate measures to assess digital patient engagement through patients’ use of VA’s My HealtheVet portal. The process yielded two robust measures sets prepared for future piloting and validation in surveys among Veterans. PMID:28550008

The significance of digital citizenship in the well-being of older migrants.

PubMed

Millard, A; Baldassar, L; Wilding, R

2018-05-01

To understand the increasingly important role of digital citizenship (the ability to participate in society online) in supporting the well-being of ageing migrants. Participant observation, social network mapping, ethnographic and life-history interviews. Fifteen in-depth case studies examined the role of online participation in fostering the well-being and care of older migrants in Perth, Western Australia. Participants are members of an 'internet café' that facilitates their shared development of Internet skills. The case studies are derived from ethnographic research conducted between July and October 2016. Older peoples' maintenance of support networks and social engagement, and their access to healthcare services, can be enhanced when they are motivated to increase their digital literacy (the ability to use the Internet for information and communication) through appropriate educational, technological, infrastructure and social support. This support is likely to be more effective when developed through social learning systems that create communities of practice. Improving digital literacy has special implications for the well-being of older migrants because it can enhance their ability to exchange emotional support across distance. Digital literacy for older migrants can dramatically increase their ability to maintain and expand dispersed networks of support. Effective implementation of affordable and age-inclusive information and communication technology (ITC) infrastructure requires integrated support that connects individuals and their homes with social learning systems to ensure that participation continues as mobility declines. As health information and social engagement are increasingly delivered through online platforms, supporting the digital citizenship of older people is becoming an important equity issue. Copyright © 2018 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Prioritizing Measures of Digital Patient Engagement: A Delphi Expert Panel Study.

PubMed

Garvin, Lynn A; Simon, Steven R

2017-05-26

Establishing a validated scale of patient engagement through use of information technology (ie, digital patient engagement) is the first step to understanding its role in health and health care quality, outcomes, and efficient implementation by health care providers and systems. The aim of this study was to develop and prioritize measures of digital patient engagement based on patients' use of the US Department of Veterans Affairs (VA)'s MyHealtheVet (MHV) portal, focusing on the MHV/Blue Button and Secure Messaging functions. We aligned two models from the information systems and organizational behavior literatures to create a theory-based model of digital patient engagement. On the basis of this model, we conducted ten key informant interviews to identify potential measures from existing VA studies and consolidated the measures. We then conducted three rounds of modified Delphi rating by 12 national eHealth experts via Web-based surveys to prioritize the measures. All 12 experts completed the study's three rounds of modified Delphi ratings, resulting in two sets of final candidate measures representing digital patient engagement for Secure Messaging (58 measures) and MHV/Blue Button (71 measures). These measure sets map to Donabedian's three types of quality measures: (1) antecedents (eg, patient demographics); (2) processes (eg, a novel measure of Web-based care quality); and (3) outcomes (eg, patient engagement). This national expert panel study using a modified Delphi technique prioritized candidate measures to assess digital patient engagement through patients' use of VA's My HealtheVet portal. The process yielded two robust measures sets prepared for future piloting and validation in surveys among Veterans. ©Lynn A Garvin, Steven R Simon. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 26.05.2017.

Integration of tablet technologies in the e-laboratory of cytology: a health technology assessment.

PubMed

Giansanti, Daniele; Pochini, Marco; Giovagnoli, Maria Rosaria

2014-10-01

Although tablet systems are becoming a powerful technology, particularly useful in every application of medical imaging, to date no one has investigated the acceptance and performance of this technology in digital cytology. The specific aims of the work were (1) to design a health technology assessment (HTA) tool to assess, in terms of performance and acceptance, the introduction of tablet technologies (wearable, portable, and non portable) in the e-laboratories of cytology and (2) to test the tool in a first significant application of digital cytology. An HTA tool was proposed operating on a domain of five dimensions of investigation comprising the basic information of the product of digital cytology, the perceived subjective quality of images, the assessment of the virtual navigation on the e-slide, the assessment of the information and communication technologies features, and the diagnostic power. Six e-slides regarding studies of cervicovaginal cytology digitalized by means of an Aperio ( www.aperio.com ) scanner and uploaded onto the www.digitalslide.it Web site were used for testing the methodology on three different network connections. Three experts of cytology successfully tested the methodology on seven tablets found suitable for the study in their own standard configuration. Specific indexes furnished by the tool indicated both a high degree of performance and subjective acceptance of the investigated technology. The HTA tool thus could be useful to investigate new tablet technologies in digital cytology and furnish stakeholders with useful information that may help them make decisions involving the healthcare system. From a global point of view the study demonstrates the feasibility of using the tablet technology in digital cytology.

Integrating a Learning Management System with a Student Assignments Digital Repository. A Case Study

ERIC Educational Resources Information Center

Díaz, Javier; Schiavoni, Alejandra; Osorio, María Alejandra; Amadeo, Ana Paola; Charnelli, María Emilia

2013-01-01

The integration of different platforms and information Systems in the academic environment is highly important and quite a challenge within the field of Information Technology. This integration allows for higher resource availability and improved interaction among intervening actors. In the field of e-Learning, where Learning Management Systems…

Wildland resource information system: user's guide

Treesearch

Robert M. Russell; David A. Sharpnack; Elliot L. Amidon

1975-01-01

This user's guide provides detailed information about how to use the computer programs of WRIS, a computer system for storing and manipulating data about land areas. Instructions explain how to prepare maps, digitize by automatic scanners or by hand, produce polygon maps, and combine map layers. Support programs plot maps, store them on tapes, produce summaries,...

Digitization, Integration and Preservation of Technical and Historical Information: The Case of INTA, the National Institute for Aerospace Technique of Spain

NASA Astrophysics Data System (ADS)

Merida Martín, F.; Paz Otero, S.

2007-10-01

During the last two years the INTA -- National Institute for Aerospace Technique -- library has been improving different areas related to the information management processes, such as those related to cataloguing, dissemination of technical information, centralization at the Library of all relevant documents and information applicable to scientific research within our organization, implementation of library web services, etc. As part of these processes of modernization of services that the INTA Library is carrying out, a project of digitization of both technical documentation and historical records of the Institute has been defined. The goal is to achieve the total digitization of technical documents and historical papers through the year 2006, and provide access for the resulting electronic collection to the Spanish aerospace community. For the development of the project a deep study of the state of the art in digitization and preservation matters has been conducted. That study covers the different aspects of such a project that could be experienced, such as the risk of data loss, the bandwidth needed to guarantee access to this huge quantity of electronic documentation, the fragility of the digital media, the rapid obsolescence of hardware and software, etc. Also the project is going to assume the new reality of documents that are not originating in paper format, but are digital-born, and how to integrate all the electronic documents in one system, fulfilling the same standards and using the same available technology.

An in fiber experimental approach to photonic quantum digital signatures that does not require quantum memory

NASA Astrophysics Data System (ADS)

Collins, Robert J.; Donaldon, Ross J.; Dunjko, Vedran; Wallden, Petros; Clarke, Patrick J.; Andersson, Erika; Jeffers, John; Buller, Gerald S.

2014-10-01

Classical digital signatures are commonly used in e-mail, electronic financial transactions and other forms of electronic communications to ensure that messages have not been tampered with in transit, and that messages are transferrable. The security of commonly used classical digital signature schemes relies on the computational difficulty of inverting certain mathematical functions. However, at present, there are no such one-way functions which have been proven to be hard to invert. With enough computational resources certain implementations of classical public key cryptosystems can be, and have been, broken with current technology. It is nevertheless possible to construct information-theoretically secure signature schemes, including quantum digital signature schemes. Quantum signature schemes can be made information theoretically secure based on the laws of quantum mechanics, while classical comparable protocols require additional resources such as secret communication and a trusted authority. Early demonstrations of quantum digital signatures required quantum memory, rendering them impractical at present. Our present implementation is based on a protocol that does not require quantum memory. It also uses the new technique of unambiguous quantum state elimination, Here we report experimental results for a test-bed system, recorded with a variety of different operating parameters, along with a discussion of aspects of the system security.

The GEOSS solution for enabling data interoperability and integrative research.

PubMed

Nativi, Stefano; Mazzetti, Paolo; Craglia, Max; Pirrone, Nicola

2014-03-01

Global sustainability research requires an integrative research effort underpinned by digital infrastructures (systems) able to harness data and heterogeneous information across disciplines. Digital data and information sharing across systems and applications is achieved by implementing interoperability: a property of a product or system to work with other products or systems, present or future. There are at least three main interoperability challenges a digital infrastructure must address: technological, semantic, and organizational. In recent years, important international programs and initiatives are focusing on such an ambitious objective. This manuscript presents and combines the studies and the experiences carried out by three relevant projects, focusing on the heavy metal domain: Global Mercury Observation System, Global Earth Observation System of Systems (GEOSS), and INSPIRE. This research work recognized a valuable interoperability service bus (i.e., a set of standards models, interfaces, and good practices) proposed to characterize the integrative research cyber-infrastructure of the heavy metal research community. In the paper, the GEOSS common infrastructure is discussed implementing a multidisciplinary and participatory research infrastructure, introducing a possible roadmap for the heavy metal pollution research community to join GEOSS as a new Group on Earth Observation community of practice and develop a research infrastructure for carrying out integrative research in its specific domain.

Infrared spectrometry studies: Spectral digital data acquisition system (1971 version)

NASA Technical Reports Server (NTRS)

Lu, L.; Lyon, R. J. P.

1971-01-01

The construction of the Stanford Spectral Digital Data Acquisition System is described. The objective of the system is to record both the spectral distribution of incoming radiation from the rock samples measured by the spectroradiometer (Exotech Model 10-34 Circular Variable Filter Infrared Spectroradiometer) together with other weather information. This system is designed for both laboratory and field measurement programs. The multichannel inputs (8 channels) of the system are as follows: Ch 1 the Spectro-radiometer, Ch 2 the radiometer (PRT-5), and Ch 3 to Ch 8 for the weather information. The system records data from channel 1 and channel 2 alternately for 48 times, before a fast sweep across the six weather channels, to form a single scan in the scan counter. The operation is illustrated in a block diagram, and the theory of operation is described. The outputs are written on a 7-track magnetic tape with IBM compatible form. The format of the tape and the playback computer programs are included. The micro-pac digital modules and a CIPHER model 70 tape recorder (Cipher Data Products) are used. One of the major characteristics of this system is that it is externally clocked by the spectroradiometer instead of taking data at intervals of various wavelengths by using internal-clocking.

Descriptions of selected digital spatial data for Ravenna Army Ammunition Plant, Ohio

USGS Publications Warehouse

Schalk, C.W.; Darner, R.A.

1998-01-01

Digital spatial data of Ravenna Army Ammunition Plant (RVAAP), in northeastern Ohio, were compiled or generated from existing maps for U.S. Army Industrial Operations Command. The data are in the Ohio north state-plane coordinate system (North American Datum of 1983) in an ARC/INFO geographic information system format. The data comprise 15 layers, which include boundaries, topography, and natural and cultural features. An additional layer comprises scanned and rectified aerial photographs of RVAAP.

High Definition Information Systems. Report Prepared by the Subcommittee on Technology and Competitiveness Transmitted to the Committee on Science, Space, and Technology. House of Representatives, One Hundred Second Congress, Second Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science, Space and Technology.

The integration of television into a digital framework makes possible the merger of television and computers. Development of a digital system will permit the consumer to receive television and computer images on the same screen at a quality approaching 35mm film. If fiber optic telecommunications lines are linked to the home and standards are…

Computer-based desktop system for surgical videotape editing.

PubMed

Vincent-Hamelin, E; Sarmiento, J M; de la Puente, J M; Vicente, M

1997-05-01

The educational role of surgical video presentations should be optimized by linking surgical images to graphic evaluation of indications, techniques, and results. We describe a PC-based video production system for personal editing of surgical tapes, according to the objectives of each presentation. The hardware requirement is a personal computer (100 MHz processor, 1-Gb hard disk, 16 Mb RAM) with a PC-to-TV/video transfer card plugged into a slot. Computer-generated numerical data, texts, and graphics are transformed into analog signals displayed on TV/video. A Genlock interface (a special interface card) synchronizes digital and analog signals, to overlay surgical images to electronic illustrations. The presentation is stored as digital information or recorded on a tape. The proliferation of multimedia tools is leading us to adapt presentations to the objectives of lectures and to integrate conceptual analyses with dynamic image-based information. We describe a system that handles both digital and analog signals, production being recorded on a tape. Movies may be managed in a digital environment, with either an "on-line" or "off-line" approach. System requirements are high, but handling a single device optimizes editing without incurring such complexity that management becomes impractical to surgeons. Our experience suggests that computerized editing allows linking surgical scientific and didactic messages on a single communication medium, either a videotape or a CD-ROM.

Information management advanced development. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Gerber, C. R.

1972-01-01

The information management systems designed for the modular space station are discussed. Subjects presented are: (1) communications terminal breadboard configuration, (2) digital data bus breadboard configuration, (3) data processing assembly definition, and (4) computer program (software) assembly definition.

622-Mbps Orthogonal Frequency Division Multiplexing (OFDM) Digital Modem Implemented

NASA Technical Reports Server (NTRS)

Kifle, Muli; Bizon, Thomas P.; Nguyen, Nam T.; Tran, Quang K.; Mortensen, Dale J.

2002-01-01

Future generation space communications systems feature significantly higher data rates and relatively smaller frequency spectrum allocations than systems currently deployed. This requires the application of bandwidth- and power-efficient signal transmission techniques. There are a number of approaches to implementing such techniques, including analog, digital, mixed-signal, single-channel, or multichannel systems. In general, the digital implementations offer more advantages; however, a fully digital implementation is very difficult because of the very high clock speeds required. Multichannel techniques are used to reduce the sampling rate. One such technique, multicarrier modulation, divides the data into a number of low-rate channels that are stacked in frequency. Orthogonal frequency division multiplexing (OFDM), a form of multicarrier modulation, is being proposed for numerous systems, including mobile wireless and digital subscriber link communication systems. In response to this challenge, NASA Glenn Research Center's Communication Technology Division has developed an OFDM digital modem (modulator and demodulator) with an aggregate information throughput of 622 Mbps. The basic OFDM waveform is constructed by dividing an incoming data stream into four channels, each using either 16- ary quadrature amplitude modulation (16-QAM) or 8-phase shift keying (8-PSK). An efficient implementation for an OFDM architecture is being achieved using the combination of a discrete Fourier transform (DFT) at the transmitter to digitally stack the individual carriers, inverse DFT at the receiver to perform the frequency translations, and a polyphase filter to facilitate the pulse shaping.

Accurate color images: from expensive luxury to essential resource

NASA Astrophysics Data System (ADS)

Saunders, David R.; Cupitt, John

2002-06-01

Over ten years ago the National Gallery in London began a program to make digital images of paintings in the collection using a colorimetric imaging system. This was to provide a permanent record of the state of paintings against which future images could be compared to determine if any changes had occurred. It quickly became apparent that such images could be used not only for scientific purposes, but also in applications where transparencies were then being used, for example as source materials for printed books and catalogues or for computer-based information systems. During the 1990s we were involved in the development of a series of digital cameras that have combined the high color accuracy of the original 'scientific' imaging system with the familiarity and portability of a medium format camera. This has culminated in the program of digitization now in progress at the National Gallery. By the middle of 2001 we will have digitized all the major paintings in the collection at a resolution of 10,000 pixels along their longest dimension and with calibrated color; we are on target to digitize the whole collection by the end of 2002. The images are available on-line within the museum for consultation and so that Gallery departments can use the images in printed publications and on the Gallery's web- site. We describe the development of the imaging systems used at National Gallery and how the research we have conducted into high-resolution accurate color imaging has developed from being a peripheral, if harmless, research activity to becoming a central part of the Gallery's information and publication strategy. Finally, we discuss some outstanding issues, such as interfacing our color management procedures with the systems used by external organizations.

NATIONAL CARTOGRAPHIC INFORMATION CENTER: AN INFORMATION RESOURCE ON MAPPING PRODUCTS FOR THE NATION.

USGS Publications Warehouse

Stevens, Alan R.

1985-01-01

Since its inception in 1974 the National Cartographic Information Center (NCIC), US Geological Survey, has rapidly developed to become a focal point for providing information on the availability of cartographic data, including maps/charts, aerial photographs, satellite imagery, geodetic control, digital mapping data, map materials and related cartographic products. In early years NCIC concentrated its efforts on encoding and entering several major National Mapping Division record collections into its systems. NCIC is now stressing the acquisition of data from sources outside the National Mapping Division, including 37 Federal agencies and more than a thousand State and private institutions. A critical review has recently been conducted by NCIC of its systems with the aim of improving its efficiency and levels of operation. Several activities which resulted include improving its existing networks, refinement of digital data distribution, study of new storage media and related projects.

ATLAS Live: Collaborative Information Streams

NASA Astrophysics Data System (ADS)

Goldfarb, Steven; ATLAS Collaboration

2011-12-01

I report on a pilot project launched in 2010 focusing on facilitating communication and information exchange within the ATLAS Collaboration, through the combination of digital signage software and webcasting. The project, called ATLAS Live, implements video streams of information, ranging from detailed detector and data status to educational and outreach material. The content, including text, images, video and audio, is collected, visualised and scheduled using digital signage software. The system is robust and flexible, utilizing scripts to input data from remote sources, such as the CERN Document Server, Indico, or any available URL, and to integrate these sources into professional-quality streams, including text scrolling, transition effects, inter and intra-screen divisibility. Information is published via the encoding and webcasting of standard video streams, viewable on all common platforms, using a web browser or other common video tool. Authorisation is enforced at the level of the streaming and at the web portals, using the CERN SSO system.

Technology Used for Realization of the Reform in Informal Areas.

NASA Astrophysics Data System (ADS)

Qirko, K.

2008-12-01

ORGANIZATION OF STRUCTURE AND ADMINISTRATION OF ALUIZNI Law no. 9482, date 03.03.2006 " On legalization, urban planning and integration of unauthorized buildings", entered into force on May 15, 2006. The Council of Ministers, with its decision no.289, date 17.05.2006, established the Agency for the Legalization, Urbanization, and Integration of the Informal Zones/Buildings (ALUIZNI), with its twelve local bodies. ALUIZNI began its activity in reliance to Law no. 9482, date 03.03.2006 " On legalization, urban planning and integration of unauthorized buildings", in July 2006. The administration of this agency was completed during this period and it is composed of; General Directory and twelve regional directories. As of today, this institution has 300 employees. The administrative structure of ALUIZNI is organized to achieve the objectives of the reform and to solve the problems arising during its completion. The following sectors have been established to achieve the objectives: Sector of compensation of owners; sector of cartography, sector of geographic system data elaboration (GIS) and Information Technology; sector of urban planning; sector of registration of legalized properties and Human resource sector. Following this vision, digital air photography of the Republic of Albania is in process of realization, from which we will receive, for the first time, orthophoto and digital map, unique for the entire territory of our country. This cartographic product, will serve to all government institutions and private ones. All other systems, such as; system of territory management; system of property registration ; system of population registration; system of addresses; urban planning studies and systems; definition of boundaries of administrative and touristic zones will be established based on this cartographic system. The cartographic product will be of parameters mentioned below, divided in lots:(2.3 MEuro) 1.Lot I: It includes the urban zone, 1200 km2. It will have a resolution of 8cm pixel and it will be produced as a orthophoto and digital vectorized map. 2. Lot II: It includes the rural zone, 12000km2. Orthophoto, with resolution 8cm pixel, will be produced. 3.Lot III: It includes mountainous zone, 15000km2. We will receive orthophoto, with resolution 30cm pixel. All the technical documentation of the process will be produced in a digital manner, based on the digital map and it will be the main databases. We have established the sector of geographic system data elaboration (GIS) and Information Technology, with the purpose to assure transparency, and correctness to the process, and to assure a permanent useful information for various reasons. (1.1MEuro) GIS is a modern technology, which elaborates and makes connections among different information. The main objective of this sector is the establishment of self declaration databases, with 30 characteristics for each of them and a databases for the process, with 40 characteristics for each property, which includes cartographic, geographic and construction data.

Readout Strategy of an Electro-optical Coupled PET Detector for Time-of-Flight PET/MRI

PubMed Central

Bieniosek, M F; Olcott, P D; Levin, C S

2013-01-01

Combining PET with MRI in a single system provides clinicians with complementary molecular and anatomical information. However, existing integrated PET/MRI systems do not have time-of-flight PET capabilities. This work describes an MRI-compatible front-end electronic system with ToF capabilities. The approach employs a fast arrival-time pickoff comparator to digitize the timing information, and a laser diode to drive a 10m fiber-optic cable to optically transmit asynchronous timing information to a photodiode receiver readout system. The comparator and this electo-optical link show a combined 11.5ps fwhm jitter in response to a fast digital pulse. When configured with LYSO scintillation crystals and Hamamatsu MPPC silicon photo-multipliers the comparator and electro-optical link achieved a 511keV coincidence time resolution of 254.7ps +/− 8.0ps fwhm with 3×3×20mm crystals and 166.5 +/− 2.5ps fwhm with 3×3×5mm crystals. PMID:24061218

Effective 3-D surface modeling for geographic information systems

NASA Astrophysics Data System (ADS)

Yüksek, K.; Alparslan, M.; Mendi, E.

2013-11-01

In this work, we propose a dynamic, flexible and interactive urban digital terrain platform (DTP) with spatial data and query processing capabilities of Geographic Information Systems (GIS), multimedia database functionality and graphical modeling infrastructure. A new data element, called Geo-Node, which stores image, spatial data and 3-D CAD objects is developed using an efficient data structure. The system effectively handles data transfer of Geo-Nodes between main memory and secondary storage with an optimized Directional Replacement Policy (DRP) based buffer management scheme. Polyhedron structures are used in Digital Surface Modeling (DSM) and smoothing process is performed by interpolation. The experimental results show that our framework achieves high performance and works effectively with urban scenes independent from the amount of spatial data and image size. The proposed platform may contribute to the development of various applications such as Web GIS systems based on 3-D graphics standards (e.g. X3-D and VRML) and services which integrate multi-dimensional spatial information and satellite/aerial imagery.

Effective 3-D surface modeling for geographic information systems

NASA Astrophysics Data System (ADS)

Yüksek, K.; Alparslan, M.; Mendi, E.

2016-01-01

In this work, we propose a dynamic, flexible and interactive urban digital terrain platform with spatial data and query processing capabilities of geographic information systems, multimedia database functionality and graphical modeling infrastructure. A new data element, called Geo-Node, which stores image, spatial data and 3-D CAD objects is developed using an efficient data structure. The system effectively handles data transfer of Geo-Nodes between main memory and secondary storage with an optimized directional replacement policy (DRP) based buffer management scheme. Polyhedron structures are used in digital surface modeling and smoothing process is performed by interpolation. The experimental results show that our framework achieves high performance and works effectively with urban scenes independent from the amount of spatial data and image size. The proposed platform may contribute to the development of various applications such as Web GIS systems based on 3-D graphics standards (e.g., X3-D and VRML) and services which integrate multi-dimensional spatial information and satellite/aerial imagery.

Beacon data acquisition and display system

DOEpatents

Skogmo, D.G.; Black, B.D.

1991-12-17

A system for transmitting aircraft beacon information received by a secondary surveillance radar through telephone lines to a remote display includes a digitizer connected to the radar for preparing a serial file of data records containing position and identification information of the beacons detected by each sweep of the radar. This information is transmitted through the telephone lines to a remote computer where it is displayed. 6 figures.

Beacon data acquisition and display system

DOEpatents

Skogmo, David G.; Black, Billy D.

1991-01-01

A system for transmitting aircraft beacon information received by a secondary surveillance radar through telephone lines to a remote display includes a digitizer connected to the radar for preparing a serial file of data records containing position and identification information of the beacons detected by each sweep of the radar. This information is transmitted through the telephone lines to a remote computer where it is displayed.

Information theoretic analysis of edge detection in visual communication

NASA Astrophysics Data System (ADS)

Jiang, Bo; Rahman, Zia-ur

2010-08-01

Generally, the designs of digital image processing algorithms and image gathering devices remain separate. Consequently, the performance of digital image processing algorithms is evaluated without taking into account the artifacts introduced into the process by the image gathering process. However, experiments show that the image gathering process profoundly impacts the performance of digital image processing and the quality of the resulting images. Huck et al. proposed one definitive theoretic analysis of visual communication channels, where the different parts, such as image gathering, processing, and display, are assessed in an integrated manner using Shannon's information theory. In this paper, we perform an end-to-end information theory based system analysis to assess edge detection methods. We evaluate the performance of the different algorithms as a function of the characteristics of the scene, and the parameters, such as sampling, additive noise etc., that define the image gathering system. The edge detection algorithm is regarded to have high performance only if the information rate from the scene to the edge approaches the maximum possible. This goal can be achieved only by jointly optimizing all processes. People generally use subjective judgment to compare different edge detection methods. There is not a common tool that can be used to evaluate the performance of the different algorithms, and to give people a guide for selecting the best algorithm for a given system or scene. Our information-theoretic assessment becomes this new tool to which allows us to compare the different edge detection operators in a common environment.

Carotid Stenosis And Ulcer Detectability As A Function Of Pixel Size

NASA Astrophysics Data System (ADS)

Mintz, Leslie J.; Enzmann, Dieter R.; Keyes, Gary S.; Mainiero, Louis M.; Brody, William R.

1981-11-01

Digital radiography, in conjunction with digital subtraction methods can provide high quality images of the vascular system,1-4 Spatial resolution is one important limiting factor of this imaging technique. Since spatial resolution of a digital image is a function of pixel size, it is important to determine the pixel size threshold necessary to provide information comparable to that of conventional angiograms. This study was designed to establish the pixel size necessary to identify accurately stenotic and ulcerative lesions of the carotid artery.

Picture archiving and computing systems: the key to enterprise digital imaging.

PubMed

Krohn, Richard

2002-09-01

The utopian view of the electronic medical record includes the digital transformation of all aspects of patient information. Historically, imagery from the radiology, cardiology, ophthalmology, and pathology departments, as well as the emergency room, has been a morass of paper, film, and other media, isolated within each department's system architecture. In answer to this dilemma, picture archiving and computing systems have become the focal point of efforts to create a single platform for the collection, storage, and distribution of clinical imagery throughout the health care enterprise.

"What Page, Miss?" Enhancing Text Accessibility with DAISY (Digital Accessible Information SYstem)

ERIC Educational Resources Information Center

Spooner, Sue

2014-01-01

Introduction: The provision of specially formatted materials is a complex and increasingly difficult task, given the extensive and burgeoning range of texts and resources available for classroom use. The need to extend the provision of accessible formats to include digital resources (in addition to braille, audio, and large print) led to a study…

Enhancing Digital Access to Learning Materials for Canadians with Perceptual Disabilities: A Pilot Study. Research Report

ERIC Educational Resources Information Center

Lockerby, Christina; Breau, Rachel; Zuvela, Biljana

2006-01-01

By exploring the experiences of participants with DAISY (Digital Accessible Information System) Talking Books, the study reported in this article not only discovered how people who are blind, visually impaired, and/or print-disabled read DAISY books, but also identified participants' perceptions of DAISY as being particularly useful in their…

3D Digital Legos for Teaching Security Protocols

ERIC Educational Resources Information Center

Yu, Li; Harrison, L.; Lu, Aidong; Li, Zhiwei; Wang, Weichao

2011-01-01

We have designed and developed a 3D digital Lego system as an education tool for teaching security protocols effectively in Information Assurance courses (Lego is a trademark of the LEGO Group. Here, we use it only to represent the pieces of a construction set.). Our approach applies the pedagogical methods learned from toy construction sets by…

Distributed Compressive Sensing vs. Dynamic Compressive Sensing: Improving the Compressive Line Sensing Imaging System through Their Integration

DTIC Science & Technology

2015-01-01

streak tube imaging Lidar [15]. Nevertheless, instead of one- dimensional (1D) fan beam, a laser source modulates the digital micromirror device DMD and...Trans. Inform. Theory, vol. 52, pp. 1289-1306, 2006. [10] D. Dudley, W. Duncan and J. Slaughter, "Emerging Digital Micromirror Device (DMD) Applications

The Role of E-Vocabularies in the Description and Retrieval of Digital Educational Resources

ERIC Educational Resources Information Center

Fernández-Pampillón, Ana M.

2017-01-01

Vocabularies are linguistic resources that make it possible to access knowledge through words. They can constitute a mechanism to identify, describe, explore, and access all the digital resources with informational content pertaining to a specific knowledge domain. In this regard, they play a key role as systems for the representation and…

1989 Exclusive Economic Zone Symposium: summary and recommendations

USGS Publications Warehouse

Lockwood, M.; Hill, G.W.

1989-01-01

Issues discussed relate to digital seafloor mapping projects, cooperative federal-state programs, and requirements for additional data and information. Symposium recommendations included the need for increased surveying in coastal waters, development of standards for digital data dissemination, increased coordination with coastal states and federal agencies, and additional geophysical measurement systems abroad all mapping ships. -from Authors

Computer Forensics: Is It the Next Hot IT Subject?

ERIC Educational Resources Information Center

Williams, Victor G.; Revels, Ken

2006-01-01

Digital Forensics is not just the recovery of data or information from computer systems and their networks. It is not a procedure that can be accomplished by software alone, and most important, it is not something that can be accomplished by other than a trained IT forensic professional. Digital Forensics is an emerging science and was developed…

VENI, video, VICI: The merging of computer and video technologies

NASA Technical Reports Server (NTRS)

Horowitz, Jay G.

1993-01-01

The topics covered include the following: High Definition Television (HDTV) milestones; visual information bandwidth; television frequency allocation and bandwidth; horizontal scanning; workstation RGB color domain; NTSC color domain; American HDTV time-table; HDTV image size; digital HDTV hierarchy; task force on digital image architecture; open architecture model; future displays; and the ULTIMATE imaging system.

Developing daisy chain receivers for light-emitting diode illumination adopting the digital multiplex-512 protocol.

PubMed

Um, Keehong; Yoo, Sooyeup

2013-10-01

Protocol for digital multiplex with 512 pieces of information is increasingly adopted in the design of illumination systems. In conventional light-emitting diode systems, the receivers are connected in parallel and each of the receiving units receives all the data from the master dimmer console, but each receiving unit operates by recognizing as its own data that which corresponds to the assigned number of the receiver. Because the serial numbers of illumination devices are transmitted in binary code, synchronization is too complicated to be used properly. In order to improve the protocol of illumination control systems, we propose an algorithm of protocol reception to install and manage the system in a simpler and more convenient way. We propose the systems for controlling the light-emitting diode illumination of simplified receiver slaves adopting the digital multiplex-512 protocol where master console and multiple receiver slaves are connected in a daisy chain fashion. The digital multiplex-512 data packet is received according to the sequence order of their locations from the console, without assigning the sequence number of each channel at the receiving device. The purpose of this paper is to design a simple and small-sized controller for the control systems of lamps and lighting adopting the digital multiplex-512 network.

Preservation of Earth Science Data History with Digital Content Repository Technology

NASA Astrophysics Data System (ADS)

Wei, Y.; Pan, J.; Shrestha, B.; Cook, R. B.

2011-12-01

An increasing need for derived and on-demand data product in Earth Science research makes the digital content more difficult for providers to manage and preserve and for users to locate, understand, and consume. Specifically, this increasing need presents additional challenges in managing data processing history information and delivering such information to end users. For example, the North American Carbon Program (NACP) Multi-scale Synthesis and Terrestrial Model Intercomparison Project (MsTMIP) chose a modified SYNMAP land cover data as one of the input driver data for participating terrestrial biospheric models. The global 1km resolution SYNMAP data was created by harmonizing 3 remote sensing-based land cover products: GLCC, GLC2000, and the MODIS land cover product. The original SYNMAP land cover data was aggregated into half and quarter degree resolution. It was then enhanced with more detailed grassland and cropland types. Currently, there lacks an effective mechanism to convey this data processing information to different modeling teams for them to determine if a data product meets their needs. It still highly relies on offline human interaction. The NASA-sponsored ORNL DAAC has leveraged the contemporary digital object repository technology to promote the representation, management, and delivery of data processing history and provenance information. Within digital object repository, different data products are managed as objects, with metadata as attributes and content delivery and management services as dissemination methods. Derivation relationships among data products can be semantically referenced between digital objects. Within the repository, data users can easily track a derived data product back to its origin, explorer metadata and documents about each intermediate data product, and discover processing details involved in each derivation step. Coupled with Drupal Web Content Management System, the digital repository interface was enhanced to provide intuitive graphic representation of the data processing history. Each data product is also associated with a formal metadata record in FGDC standards, and the main fields of the FGDC record are indexed for search, and are displayed as attributes of the data product. These features enable data users to better understand and consume a data product. The representation of data processing history in digital repository can further promote long-term data preservation. Lineage information is a major aspect to make digital data understandable and usable long time into the future. Derivation references can be setup between digital objects not only within a single digital repository, but also across multiple distributed digital repositories. Along with emerging identification mechanisms, such as Digital Object Identifier (DOI), a flexible distributed digital repository network can be setup to better preserve digital content. In this presentation, we describe how digital content repository technology can be used to manage, preserve, and deliver digital data processing history information in Earth Science research domain, with selected data archived in ORNL DAAC and Model and Synthesis Thematic Data Center (MAST-DC) as testing targets.

Digital Imaging and Communications in Medicine Whole Slide Imaging Connectathon at Digital Pathology Association Pathology Visions 2017.

PubMed

Clunie, David; Hosseinzadeh, Dan; Wintell, Mikael; De Mena, David; Lajara, Nieves; Garcia-Rojo, Marcial; Bueno, Gloria; Saligrama, Kiran; Stearrett, Aaron; Toomey, David; Abels, Esther; Apeldoorn, Frank Van; Langevin, Stephane; Nichols, Sean; Schmid, Joachim; Horchner, Uwe; Beckwith, Bruce; Parwani, Anil; Pantanowitz, Liron

2018-01-01

As digital pathology systems for clinical diagnostic work applications become mainstream, interoperability between these systems from different vendors becomes critical. For the first time, multiple digital pathology vendors have publicly revealed the use of the digital imaging and communications in medicine (DICOM) standard file format and network protocol to communicate between separate whole slide acquisition, storage, and viewing components. Note the use of DICOM for clinical diagnostic applications is still to be validated in the United States. The successful demonstration shows that the DICOM standard is fundamentally sound, though many lessons were learned. These lessons will be incorporated as incremental improvements in the standard, provide more detailed profiles to constrain variation for specific use cases, and offer educational material for implementers. Future Connectathon events will expand the scope to include more devices and vendors, as well as more ambitious use cases including laboratory information system integration and annotation for image analysis, as well as more geographic diversity. Users should request DICOM features in all purchases and contracts. It is anticipated that the growth of DICOM-compliant manufacturers will likely also ease DICOM for pathology becoming a recognized standard and as such the regulatory pathway for digital pathology products.

Elaboration of a framework for the compilation of countrywide, digital maps for the satisfaction of recent demands on spatial, soil related information in Hungary

NASA Astrophysics Data System (ADS)

Pásztor, László; Dobos, Endre; Szabó, József; Bakacsi, Zsófia; Laborczi, Annamária

2013-04-01

There is a heap of evidences that demands on soil related information have been significant worldwide and it is still increasing. Soil maps were typically used for long time to satisfy these demands. By the spread of GI technology, spatial soil information systems (SSIS) and digital soil mapping (DSM) took the role of traditional soil maps. Due to the relatively high costs of data collection, new conventional soil surveys and inventories are getting less and less frequent, which fact valorises legacy soil information and the systems which are serving the their digitally processed version. The existing data contain a wealth of information that can be exploited by proper methodology. Not only the degree of current needs for soil information has changed but also its nature. Traditionally the agricultural functions of soils were focussed on, which was also reflected in the methodology of data collection and mapping. Recently the multifunctionality of soils is getting to gain more and more ground; consequently information related to additional functions of soils becomes identically important. The new types of information requirements however cannot be fulfilled generally with new data collections at least not on such a level as it was done in the frame of traditional soil surveys. Soil monitoring systems have been established for the collection of recent information on the various elements of the DPSIR (Driving Forces-Pressures-State-Impacts-Responses) framework, but the primary goal of these systems has not been mapping by all means. And definitely this is the case concerning the two recently working Hungarian soil monitoring systems. In Hungary, presently soil data requirements are fulfilled with the recently available datasets either by their direct usage or after certain specific and generally fortuitous, thematic and/or spatial inference. Due to the more and more frequently emerging discrepancies between the available and the expected data, there might be notable imperfection as for the accuracy and reliability of the delivered products. Since, similarly to the great majority of the world, large-scale, comprehensive new surveys cannot be expected in the near future, the actually available legacy data should be relied on. With a recently started project we would like to significantly extend the potential, how countrywide soil information requirements could be satisfied. In the frame of our project we plan the execution of spatial and thematic data mining of significant amount of soil related information available in the form of legacy soil data as well as digital databases and spatial soil information systems. In the course of the analyses we will lean on auxiliary, spatial data themes related to environmental elements. Based on the established relationships we will convert and integrate the specific data sets for the regionalization of the various, derived soil parameters. By the aid of GIS and geostatistical tools we will carry out the spatial extension of certain pedological variables featuring the (including degradation) state, processes or functions of soils. We plan to compile digital soil maps which fulfil optimally the national and international demands from points of view of thematic, spatial and temporal accuracy. The targeted spatial resolution of the proposed countrywide, digital, thematic soil property and function maps is at least 1:50.000 (approx. 50-100 meter raster). Our stressful objective is the definite solution of the regionalization of the information collected in the frame of two recent, contemporary, national, systematic soil data collection (not designed for mapping purpose) on the recent state of soils, in order to produce countrywide maps for the spatial inventory of certain soil properties, processes and functions with sufficient accuracy and reliability.

Digital imagery/telecytology. International Academy of Cytology Task Force summary. Diagnostic Cytology Towards the 21st Century: An International Expert Conference and Tutorial.

PubMed

O'Brien, M J; Takahashi, M; Brugal, G; Christen, H; Gahm, T; Goodell, R M; Karakitsos, P; Knesel, E A; Kobler, T; Kyrkou, K A; Labbe, S; Long, E L; Mango, L J; McGoogan, E; Oberholzer, M; Reith, A; Winkler, C

1998-01-01

Optical digital imaging and its related technologies have applications in cytopathology that encompass training and education, image analysis, diagnosis, report documentation and archiving, and telecommunications. Telecytology involves the use of telecommunications to transmit cytology images for the purposes of diagnosis, consultation or education. This working paper provides a mainly informational overview of optical digital imaging and summarizes current technologic resources and applications and some of the ethical and legal implications of the use of these new technologies in cytopathology. Computer hardware standards for optical digital imagery will continue to be driven mainly by commercial interests and nonmedical imperatives, but professional organizations can play a valuable role in developing recommendations or standards for digital image sampling, documentation, archiving, authenticity safeguards and teleconsultation protocols; in addressing patient confidentiality and ethical, legal and informed consent issues; and in providing support for quality assurance and standardization of digital image-based testing. There is some evidence that high levels of accuracy for telepathology diagnosis can be achieved using existing dynamic systems, which may also be applicable to telecytology consultation. Static systems for both telepathology and telecytology, which have the advantage of considerably lower cost, appear to have lower levels of accuracy. Laboratories that maintain digital image databases should adopt practices and protocols that ensure patient confidentiality. Individuals participating in telecommunication of digital images for diagnosis should be properly qualified, meet licensing requirements and use procedures that protect patient confidentiality. Such individuals should be cognizant of the limitations of the technology and employ quality assurance practices that ensure the validity and accuracy of each consultation. Even in an informal teleconsultation setting one should define the extent of participation and be mindful of potential malpractice liability. Digital imagery applications will continue to present new opportunities and challenges. Position papers such as this are directed toward assisting the profession to stay informed and in control of these applications in the laboratory. Telecytology is an area in particular need of studies of good quality to provide data on factors affecting accuracy. New technologic approaches to addressing the issue of selective sampling in static image consultation are needed. The use of artificial intelligence software as an adjunct to enhance the accuracy and reproducibility of cytologic diagnosis of digital images in routine and consultation settings deserves to be pursued. Other telecytology-related issues that require clarification and the adoption of workable guidelines include interstate licensure and protocols to define malpractice liability.

Digital Learning Characteristics and Principles of Information Resources Knowledge Structuring

ERIC Educational Resources Information Center

Belichenko, Margarita; Davidovitch, Nitza; Kravchenko, Yuri

2017-01-01

Analysis of principles knowledge representation in information systems led to the necessity of improving the structuring knowledge. It is caused by the development of software component and new possibilities of information technologies. The article combines methodological aspects of structuring knowledge and effective usage of information…

Developing Digital Dashboard Management for Learning System Dynamic Cooperative Simulation Behavior of Indonesia. (Study on Cooperative Information Organization in the Ministry of Cooperatives and SME)

NASA Astrophysics Data System (ADS)

Eni, Yuli; Aryanto, Rudy

2014-03-01

There are problems being experienced by the Ministry of cooperatives and SME (Small and Medium Enterprise) including the length of time in the decision by the Government to establish a policy that should be taken for local cooperatives across the province of Indonesia. The decision-making process is still analyzed manually, so that sometimes the decisions taken are also less appropriate, effective and efficient. The second problem is the lack of monitoring data cooperative process province that is too much, making it difficult for the analysis of dynamic information to be useful. Therefore the authors want to fix the system that runs by using digital dashboard management system supported by the modeling of system dynamics. In addition, the author also did the design of a system that can support the system. Design of this system is aimed to ease the experts, head, and the government to decide (DSS - Decision Support System) accurately effectively and efficiently, because in the system are raised alternative simulation in a description of the decision to be taken and the result from the decision. The system is expected to be designed dan simulated can ease and expedite the decision making. The design of dynamic digital dashboard management conducted by method of OOAD (Objects Oriented Analysis and Design) complete with UML notation.

Synthetic Analog and Digital Circuits for Cellular Computation and Memory

PubMed Central

Purcell, Oliver; Lu, Timothy K.

2014-01-01

Biological computation is a major area of focus in synthetic biology because it has the potential to enable a wide range of applications. Synthetic biologists have applied engineering concepts to biological systems in order to construct progressively more complex gene circuits capable of processing information in living cells. Here, we review the current state of computational genetic circuits and describe artificial gene circuits that perform digital and analog computation. We then discuss recent progress in designing gene circuits that exhibit memory, and how memory and computation have been integrated to yield more complex systems that can both process and record information. Finally, we suggest new directions for engineering biological circuits capable of computation. PMID:24794536

Research on ecological function zoning information system based on WebGIS

NASA Astrophysics Data System (ADS)

Zhang, Jianxiong; Zhang, Gang

2007-06-01

With the development of information technology, application of WebGIS will make it possible to realize digitization and intellectualization in issuing and managing information of ecological function zoning. Firstly, this paper introduces the fundamental principles, basic methods and current situation of development and various support techniques about WebGIS. Secondly, the paper not only compares and analyzes the above methods but also discusses their applied prospect and feasibility in Web management. Finally, exemplified by Jiaozuo City, the paper puts forward an idea of design and a project of realization about the information system. In this research, the digital map and establishment of map database have been finished by MapInfo. Combining with some technical data of ecological environment of Jiaozuo City, the information of ecological environment resources is collected, stored, analyzed, calculated and displayed in the form of pictures and graphs on the WebGIS platform, which makes use of secondary development flat-MapXtreme for Java and some tools such as Java, JSP and JavaScript. Serve mode is adopted in the system which has realized the operating, inquiring of basic map and working out thematic map. By the finished system, it brings some references.

Timing performance comparison of digital methods in positron emission tomography

NASA Astrophysics Data System (ADS)

Aykac, Mehmet; Hong, Inki; Cho, Sanghee

2010-11-01

Accurate timing information is essential in positron emission tomography (PET). Recent improvements in high speed electronics made digital methods more attractive to find alternative solutions to create a time mark for an event. Two new digital methods (mean PMT pulse model, MPPM, and median filtered zero crossing method, MFZCM) were introduced in this work and compared to traditional methods such as digital leading edge (LE) and digital constant fraction discrimination (CFD). In addition, the performances of all four digital methods were compared to analog based LE and CFD. The time resolution values for MPPM and MFZCM were measured below 300 ps at 1.6 GS/s and above that was similar to the analog based coincidence timing results. In addition, the two digital methods were insensitive to the changes in threshold setting that might give some improvement in system dead time.

Advances in optical information processing IV; Proceedings of the Meeting, Orlando, FL, Apr. 18-20, 1990

NASA Astrophysics Data System (ADS)

Pape, Dennis R.

1990-09-01

The present conference discusses topics in optical image processing, optical signal processing, acoustooptic spectrum analyzer systems and components, and optical computing. Attention is given to tradeoffs in nonlinearly recorded matched filters, miniature spatial light modulators, detection and classification using higher-order statistics of optical matched filters, rapid traversal of an image data base using binary synthetic discriminant filters, wideband signal processing for emitter location, an acoustooptic processor for autonomous SAR guidance, and sampling of Fresnel transforms. Also discussed are an acoustooptic RF signal-acquisition system, scanning acoustooptic spectrum analyzers, the effects of aberrations on acoustooptic systems, fast optical digital arithmetic processors, information utilization in analog and digital processing, optical processors for smart structures, and a self-organizing neural network for unsupervised learning.

Concurrent signal combining and channel estimation in digital communications

DOEpatents

Ormesher, Richard C [Albuquerque, NM; Mason, John J [Albuquerque, NM

2011-08-30

In the reception of digital information transmitted on a communication channel, a characteristic exhibited by the communication channel during transmission of the digital information is estimated based on a communication signal that represents the digital information and has been received via the communication channel. Concurrently with the estimating, the communication signal is used to decide what digital information was transmitted.

A novel proposal of GPON-oriented fiber grating sensing data digitalization system for remote sensing network

NASA Astrophysics Data System (ADS)

Wang, Yubao; Zhu, Zhaohui; Wang, Lu; Bai, Jian

2016-05-01

A novel GPON-oriented sensing data digitalization system is proposed to achieve remote monitoring of fiber grating sensing networks utilizing existing optical communication networks in some harsh environments. In which, Quick digitalization of sensing information obtained from the reflected lightwaves by fiber Bragg grating (FBG) sensor is realized, and a novel frame format of sensor signal is designed to suit for public transport so as to facilitate sensor monitoring center to receive and analyze the sensor data. The delay effect, identification method of the sensor data, and various interference factors which influence the sensor data to be correctly received are analyzed. The system simulation is carried out with OptiSystem/Matlab co-simulation approach. The theoretical analysis and simulation results verify the feasibility of the integration of the sensor network and communication network.

Photonic quantum digital signatures operating over kilometer ranges in installed optical fiber

NASA Astrophysics Data System (ADS)

Collins, Robert J.; Fujiwara, Mikio; Amiri, Ryan; Honjo, Toshimori; Shimizu, Kaoru; Tamaki, Kiyoshi; Takeoka, Masahiro; Andersson, Erika; Buller, Gerald S.; Sasaki, Masahide

2016-10-01

The security of electronic communications is a topic that has gained noteworthy public interest in recent years. As a result, there is an increasing public recognition of the existence and importance of mathematically based approaches to digital security. Many of these implement digital signatures to ensure that a malicious party has not tampered with the message in transit, that a legitimate receiver can validate the identity of the signer and that messages are transferable. The security of most digital signature schemes relies on the assumed computational difficulty of solving certain mathematical problems. However, reports in the media have shown that certain implementations of such signature schemes are vulnerable to algorithmic breakthroughs and emerging quantum processing technologies. Indeed, even without quantum processors, the possibility remains that classical algorithmic breakthroughs will render these schemes insecure. There is ongoing research into information-theoretically secure signature schemes, where the security is guaranteed against an attacker with arbitrary computational resources. One such approach is quantum digital signatures. Quantum signature schemes can be made information-theoretically secure based on the laws of quantum mechanics while comparable classical protocols require additional resources such as anonymous broadcast and/or a trusted authority. Previously, most early demonstrations of quantum digital signatures required dedicated single-purpose hardware and operated over restricted ranges in a laboratory environment. Here, for the first time, we present a demonstration of quantum digital signatures conducted over several kilometers of installed optical fiber. The system reported here operates at a higher signature generation rate than previous fiber systems.

Information retrieval algorithms: A survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raghavan, P.

We give an overview of some algorithmic problems arising in the representation of text/image/multimedia objects in a form amenable to automated searching, and in conducting these searches efficiently. These operations are central to information retrieval and digital library systems.

Digital telephony analysis model and issues

NASA Astrophysics Data System (ADS)

Keuthan, Lynn M.

1995-09-01

Experts in the fields of digital telephony and communications security have stated the need for an analytical tool for evaluating complex issues. Some important policy issues discussed by experts recently include implementing digital wire-taps, implementation of the 'Clipper Chip', required registration of encryption/decryption keys, and export control of cryptographic equipment. Associated with the implementation of these policies are direct costs resulting from implementation, indirect cost benefits from implementation, and indirect costs resulting from the risks of implementation or factors reducing cost benefits. Presented herein is a model for analyzing digital telephony policies and systems and their associated direct costs and indirect benefit and risk factors. In order to present the structure of the model, issues of national importance and business-related issues are discussed. The various factors impacting the implementation of the associated communications systems and communications security are summarized, and various implementation tradeoffs are compared based on economic benefits/impact. The importance of the issues addressed herein, as well as other digital telephony issues, has greatly increased with the enormous increases in communication system connectivity due to the advance of the National Information Infrastructure.

Simultaneous two-wavelength tri-window common-path digital holography

NASA Astrophysics Data System (ADS)

Liu, Lei; Shan, Mingguang; Zhong, Zhi

2018-06-01

Two-wavelength common-path off-axis digital holography is proposed with a tri-window in a single shot. It is established using a standard 4f optical image system with a 2D Ronchi grating placed outside the Fourier plane. The input plane consists of three windows: one for the object and the other two for reference. Aided by a spatial filter together with two orthogonal linear polarizers in the Fourier plane, the two-wavelength information is encoded into a multiplexed hologram with two orthogonal spatial frequencies that enable full separation of spectral information in the digital Fourier space without resolution loss. Theoretical analysis and experimental results illustrate that our approach can simultaneously perform quantitative phase imaging at two wavelengths.

Terrace Layout Using a Computer Assisted System

USDA-ARS?s Scientific Manuscript database

Development of a web-based terrace design tool based on the MOTERR program is presented, along with representative layouts for conventional and parallel terrace systems. Using digital elevation maps and geographic information systems (GIS), this tool utilizes personal computers to rapidly construct ...

A demonstration of ERTS-1 analog and digital techniques applied to strip mining in Maryland and West Virginia

NASA Technical Reports Server (NTRS)

Anderson, A. T.; Schubert, J.

1974-01-01

The largest contour strip mining operations in western Maryland and West Virginia are located within the Georges Creek and the Upper Potomac Basins. These two coal basins lie within the Georges Creek (Wellersburg) syncline. The disturbed strip mine areas were delineated with the surrounding geological and vegetation features using ERTS-1 data in both analog (imagery) and digital form. The two digital systems used were: (1) the ERTS-Analysis system, a point-by-point digital analysis of spectral signatures based on known spectral values, and (2) the LARS Automatic Data Processing System. The digital techniques being developed will later be incorporated into a data base for land use planning. These two systems aided in efforts to determine the extent and state of strip mining in this region. Aircraft data, ground verification information, and geological field studies also aided in the application of ERTS-1 imagery to perform an integrated analysis that assessed the adverse effects of strip mining. The results indicated that ERTS can both monitor and map the extent of strip mining to determine immediately the acreage affected and indicate where future reclamation and revegetation may be necessary.

A telerobotic digital controller system

NASA Technical Reports Server (NTRS)

Brown, Richard J.

1992-01-01

This system is a network of joint mounted dual axes digital servo-controllers (DDSC), providing control of various joints and end effectors of different robotic systems. This report provides description of and user required information for the Digital Controller System Network (DSCN) and, in particular, the DDSC, Model DDSC-2, developed to perform the controller functions. The DDSC can control 3 phase brushless or brush type DC motors, requiring up to 8 amps. Only four wires, two for power and 2 for serial communication, are required, except for local sensor and motor connections. This highly capable, very flexible, programmable servo-controller, contained on a single, compact printed circuit board measuring only 4.5 x 5.1 inches, is applicable to control systems of all types from sub-arc second precision pointing to control of robotic joints and end effectors. This document concentrates on the robotic applications for the DDSC.

The past, present and future of cyber-physical systems: a focus on models.

PubMed

Lee, Edward A

2015-02-26

This paper is about better engineering of cyber-physical systems (CPSs) through better models. Deterministic models have historically proven extremely useful and arguably form the kingpin of the industrial revolution and the digital and information technology revolutions. Key deterministic models that have proven successful include differential equations, synchronous digital logic and single-threaded imperative programs. Cyber-physical systems, however, combine these models in such a way that determinism is not preserved. Two projects show that deterministic CPS models with faithful physical realizations are possible and practical. The first project is PRET, which shows that the timing precision of synchronous digital logic can be practically made available at the software level of abstraction. The second project is Ptides (programming temporally-integrated distributed embedded systems), which shows that deterministic models for distributed cyber-physical systems have practical faithful realizations. These projects are existence proofs that deterministic CPS models are possible and practical.

The Past, Present and Future of Cyber-Physical Systems: A Focus on Models

PubMed Central

Lee, Edward A.

2015-01-01

This paper is about better engineering of cyber-physical systems (CPSs) through better models. Deterministic models have historically proven extremely useful and arguably form the kingpin of the industrial revolution and the digital and information technology revolutions. Key deterministic models that have proven successful include differential equations, synchronous digital logic and single-threaded imperative programs. Cyber-physical systems, however, combine these models in such a way that determinism is not preserved. Two projects show that deterministic CPS models with faithful physical realizations are possible and practical. The first project is PRET, which shows that the timing precision of synchronous digital logic can be practically made available at the software level of abstraction. The second project is Ptides (programming temporally-integrated distributed embedded systems), which shows that deterministic models for distributed cyber-physical systems have practical faithful realizations. These projects are existence proofs that deterministic CPS models are possible and practical. PMID:25730486

Method for enhanced control of welding processes

DOEpatents

Sheaffer, Donald A.; Renzi, Ronald F.; Tung, David M.; Schroder, Kevin

2000-01-01

Method and system for producing high quality welds in welding processes, in general, and gas tungsten arc (GTA) welding, in particular by controlling weld penetration. Light emitted from a weld pool is collected from the backside of a workpiece by optical means during welding and transmitted to a digital video camera for further processing, after the emitted light is first passed through a short wavelength pass filter to remove infrared radiation. By filtering out the infrared component of the light emitted from the backside weld pool image, the present invention provides for the accurate determination of the weld pool boundary. Data from the digital camera is fed to an imaging board which focuses on a 100.times.100 pixel portion of the image. The board performs a thresholding operation and provides this information to a digital signal processor to compute the backside weld pool dimensions and area. This information is used by a control system, in a dynamic feedback mode, to automatically adjust appropriate parameters of a welding system, such as the welding current, to control weld penetration and thus, create a uniform weld bead and high quality weld.

GIRAS TO MOSS INTERFACE.

USGS Publications Warehouse

DiNardo, Thomas P.; Jackson, R. Alan

1984-01-01

An analysis of land use change for an area in Boulder County, Colorado, was conducted using digital cartographic data. The authors selected data in the Geographic Information Retrieval and Analysis System (GIRAS) format which is digitized from the 1:250,000-scale land use and land cover map series. The Map Overlay and Statistical System (MOSS) was used as an analytical tool for the study. The authors describe the methodology used in converting the GIRAS file into a MOSS format and the activities associated with the conversion.

IDSP- INTERACTIVE DIGITAL SIGNAL PROCESSOR

NASA Technical Reports Server (NTRS)

Mish, W. H.

1994-01-01

The Interactive Digital Signal Processor, IDSP, consists of a set of time series analysis "operators" based on the various algorithms commonly used for digital signal analysis work. The processing of a digital time series to extract information is usually achieved by the application of a number of fairly standard operations. However, it is often desirable to "experiment" with various operations and combinations of operations to explore their effect on the results. IDSP is designed to provide an interactive and easy-to-use system for this type of digital time series analysis. The IDSP operators can be applied in any sensible order (even recursively), and can be applied to single time series or to simultaneous time series. IDSP is being used extensively to process data obtained from scientific instruments onboard spacecraft. It is also an excellent teaching tool for demonstrating the application of time series operators to artificially-generated signals. IDSP currently includes over 43 standard operators. Processing operators provide for Fourier transformation operations, design and application of digital filters, and Eigenvalue analysis. Additional support operators provide for data editing, display of information, graphical output, and batch operation. User-developed operators can be easily interfaced with the system to provide for expansion and experimentation. Each operator application generates one or more output files from an input file. The processing of a file can involve many operators in a complex application. IDSP maintains historical information as an integral part of each file so that the user can display the operator history of the file at any time during an interactive analysis. IDSP is written in VAX FORTRAN 77 for interactive or batch execution and has been implemented on a DEC VAX-11/780 operating under VMS. The IDSP system generates graphics output for a variety of graphics systems. The program requires the use of Versaplot and Template plotting routines and IMSL Math/Library routines. These software packages are not included in IDSP. The virtual memory requirement for the program is approximately 2.36 MB. The IDSP system was developed in 1982 and was last updated in 1986. Versaplot is a registered trademark of Versatec Inc. Template is a registered trademark of Template Graphics Software Inc. IMSL Math/Library is a registered trademark of IMSL Inc.

Review of passive-blind detection in digital video forgery based on sensing and imaging techniques

NASA Astrophysics Data System (ADS)

Tao, Junjie; Jia, Lili; You, Ying

2016-01-01

Advances in digital video compression and IP communication technologies raised new issues and challenges concerning the integrity and authenticity of surveillance videos. It is so important that the system should ensure that once recorded, the video cannot be altered; ensuring the audit trail is intact for evidential purposes. This paper gives an overview of passive techniques of Digital Video Forensics which are based on intrinsic fingerprints inherent in digital surveillance videos. In this paper, we performed a thorough research of literatures relevant to video manipulation detection methods which accomplish blind authentications without referring to any auxiliary information. We presents review of various existing methods in literature, and much more work is needed to be done in this field of video forensics based on video data analysis and observation of the surveillance systems.

Development and management of a geographic information system for health research in a developing-country setting: a case study from Bangladesh.

PubMed

Sugimoto, Jonathan D; Labrique, Alain B; Ahmad, Salahuddin; Rashid, Mahbubur; Klemm, Rolf D W; Christian, Parul; West, Keith P

2007-12-01

In the last decade, geographic information systems (GIS) have become accessible to researchers in developing countries, yet guidance remains sparse for developing a GIS. Drawing on experience in developing a GIS for a large community trial in rural Bangladesh, six stages for constructing, maintaining, and using a GIS for health research purposes were outlined. The system contains 0.25 million landmarks, including 150,000 houses, in an area of 435 sq km with over 650,000 people. Assuming access to reasonably accurate paper boundary maps of the intended working area and the absence of pre-existing digital local-area maps, the six stages are: to (a) digitize and update existing paper maps, (b) join the digitized maps into a large-area map, (c) reference this large-area map to a geographic coordinate system, (d) insert location landmarks of interest, (e) maintain the GIS, and (f) link it to other research databases. These basic steps can produce a household-level, updated, scaleable GIS that can both enhance field efficiency and support epidemiologic analyses of demographic patterns, diseases, and health outcomes.

Development and Management of a Geographic Information System for Health Research in a Developing-country Setting: A Case Study from Bangladesh

PubMed Central

Sugimoto, Jonathan D.; Labrique, Alain B.; Salahuddin, Ahmad; Rashid, Mahbubur; Klemm, Rolf D.W.; Christian, Parul; West, Keith P.

2007-01-01

In the last decade, geographic information systems (GIS) have become accessible to researchers in developing countries, yet guidance remains sparse for developing a GIS. Drawing on experience in developing a GIS for a large community trial in rural Bangladesh, six stages for constructing, maintaining, and using a GIS for health research purposes were outlined. The system contains 0.25 million landmarks, including 150,000 houses, in an area of 435 sq km with over 650,000 people. Assuming access to reasonably accurate paper boundary maps of the intended working area and the absence of pre-existing digital local-area maps, the six stages are: to (a) digitize and update existing paper maps, (b) join the digitized maps into a large-area map, (c) reference this large-area map to a geographic coordinate system, (d) insert location landmarks of interest, (e) maintain the GIS, and (f) link it to other research databases. These basic steps can produce a household-level, updated, scaleable GIS that can both enhance field efficiency and support epidemiologic analyses of demographic patterns, diseases, and health outcomes. PMID:18402187

Digital health and the challenge of health systems transformation.

PubMed

Alami, Hassane; Gagnon, Marie-Pierre; Fortin, Jean-Paul

2017-01-01

Information and communication technologies have transformed all sectors of society. The health sector is no exception to this trend. In light of "digital health", we see multiplying numbers of web platforms and mobile health applications, often brought by new unconventional players who produce and offer services in non-linear and non-hierarchal ways, this by multiplying access points to services for people. Some speak of a "uberization" of healthcare. New realities and challenges have emerged from this paradigm, which question the abilities of health systems to cope with new business and economic models, governance of data and regulation. Countries must provide adequate responses so that digital health, based increasingly on disruptive technologies, can benefit for all.

Digitally enabled patients, professionals and providers: making the case for an electronic health record in mental health services.

PubMed

Richardson, Jonathan; McDonald, Joe

2016-10-01

The move to a digital health service may improve some components of health systems: information, communication and documentation of care. This article gives a brief definition and history of what is meant by an electronic health record (EHR). There is some evidence of benefits in a number of areas, including legibility, accuracy and the secondary use of information, but there is a need for further research, which may need to use different methodologies to analyse the impact an EHR has on patients, professionals and providers.

The Event Related Brain Potential as an Index of Information Processing, Cognitive Activity, and Skill Acquisition: A Program of Basic Research.

DTIC Science & Technology

1985-02-28

psychophysiological function in question. For example, for most measurements of the cardiovascular system, data are available only at each heart beat ...function of the duration of the charging period, *i . and hence will be proportional to the inter- beat interval (and inversely °°. • .*~* 14 information (0... beat interval. Thus, the output will lag the input. 2.3 Computer Access to Voltage x Time Functions 2.3.1 Digital Input and Analog-to-Digital Conversion

Tools for Large-Scale Data Analytic Examination of Relational and Epistemic Networks in Engineering Education

ERIC Educational Resources Information Center

Madhavan, Krishna; Johri, Aditya; Xian, Hanjun; Wang, G. Alan; Liu, Xiaomo

2014-01-01

The proliferation of digital information technologies and related infrastructure has given rise to novel ways of capturing, storing and analyzing data. In this paper, we describe the research and development of an information system called Interactive Knowledge Networks for Engineering Education Research (iKNEER). This system utilizes a framework…

Workflow-enabled distributed component-based information architecture for digital medical imaging enterprises.

PubMed

Wong, Stephen T C; Tjandra, Donny; Wang, Huili; Shen, Weimin

2003-09-01

Few information systems today offer a flexible means to define and manage the automated part of radiology processes, which provide clinical imaging services for the entire healthcare organization. Even fewer of them provide a coherent architecture that can easily cope with heterogeneity and inevitable local adaptation of applications and can integrate clinical and administrative information to aid better clinical, operational, and business decisions. We describe an innovative enterprise architecture of image information management systems to fill the needs. Such a system is based on the interplay of production workflow management, distributed object computing, Java and Web techniques, and in-depth domain knowledge in radiology operations. Our design adapts the approach of "4+1" architectural view. In this new architecture, PACS and RIS become one while the user interaction can be automated by customized workflow process. Clinical service applications are implemented as active components. They can be reasonably substituted by applications of local adaptations and can be multiplied for fault tolerance and load balancing. Furthermore, the workflow-enabled digital radiology system would provide powerful query and statistical functions for managing resources and improving productivity. This paper will potentially lead to a new direction of image information management. We illustrate the innovative design with examples taken from an implemented system.

Working at the microscope: analysis of the activities involved in diagnostic pathology.

PubMed

Randell, Rebecca; Ruddle, Roy A; Quirke, Phil; Thomas, Rhys G; Treanor, Darren

2012-02-01

To study the current work practice of histopathologists to inform the design of digital microscopy systems. Four gastrointestinal histopathologists were video-recorded as they undertook their routine work. Analysis of the video data shows a range of activities beyond viewing slides involved in reporting a case. There is much overlapping of activities, supported by the 'eyes free' nature of the pathologists' interaction with the microscope. The order and timing of activities varies according to consultant. In order to support the work of pathologists adequately, digital microscopy systems need to provide support for a range of activities beyond viewing slides. Digital microscopy systems should support multitasking, while also providing flexibility so that pathologists can adapt their use of the technology to their own working patterns. © 2011 Blackwell Publishing Ltd.

Comparison of minute distribution frequency for anesthesia start and end times from an anesthesia information management system and paper records.

PubMed

Phelps, Michael; Latif, Asad; Thomsen, Robert; Slodzinski, Martin; Raghavan, Rahul; Paul, Sharon Leigh; Stonemetz, Jerry

2017-08-01

Use of an anesthesia information management system (AIMS) has been reported to improve accuracy of recorded information. We tested the hypothesis that analyzing the distribution of times charted on paper and computerized records could reveal possible rounding errors, and that this effect could be modulated by differences in the user interface for documenting certain event times with an AIMS. We compared the frequency distribution of start and end times for anesthesia cases completed with paper records and an AIMS. Paper anesthesia records had significantly more times ending with "0" and "5" compared to those from the AIMS (p < 0.001). For case start times, AIMS still exhibited end-digit preference, with times whose last digits had significantly higher frequencies of "0" and "5" than other integers. This effect, however, was attenuated compared to that for paper anesthesia records. For case end times, the distribution of minutes recorded with AIMS was almost evenly distributed, unlike those from paper records that still showed significant end-digit preference. The accuracy of anesthesia case start times and case end times, as inferred by statistical analysis of the distribution of the times, is enhanced with the use of an AIMS. Furthermore, the differences in AIMS user interface for documenting case start and case end times likely affects the degree of end-digit preference, and likely accuracy, of those times.

Medical image archive node simulation and architecture

NASA Astrophysics Data System (ADS)

Chiang, Ted T.; Tang, Yau-Kuo

1996-05-01

It is a well known fact that managed care and new treatment technologies are revolutionizing the health care provider world. Community Health Information Network and Computer-based Patient Record projects are underway throughout the United States. More and more hospitals are installing digital, `filmless' radiology (and other imagery) systems. They generate a staggering amount of information around the clock. For example, a typical 500-bed hospital might accumulate more than 5 terabytes of image data in a period of 30 years for conventional x-ray images and digital images such as Magnetic Resonance Imaging and Computer Tomography images. With several hospitals contributing to the archive, the storage required will be in the hundreds of terabytes. Systems for reliable, secure, and inexpensive storage and retrieval of digital medical information do not exist today. In this paper, we present a Medical Image Archive and Distribution Service (MIADS) concept. MIADS is a system shared by individual and community hospitals, laboratories, and doctors' offices that need to store and retrieve medical images. Due to the large volume and complexity of the data, as well as the diversified user access requirement, implementation of the MIADS will be a complex procedure. One of the key challenges to implementing a MIADS is to select a cost-effective, scalable system architecture to meet the ingest/retrieval performance requirements. We have performed an in-depth system engineering study, and developed a sophisticated simulation model to address this key challenge. This paper describes the overall system architecture based on our system engineering study and simulation results. In particular, we will emphasize system scalability and upgradability issues. Furthermore, we will discuss our simulation results in detail. The simulations study the ingest/retrieval performance requirements based on different system configurations and architectures for variables such as workload, tape access time, number of drives, number of exams per patient, number of Central Processing Units, patient grouping, and priority impacts. The MIADS, which could be a key component of a broader data repository system, will be able to communicate with and obtain data from existing hospital information systems. We will discuss the external interfaces enabling MIADS to communicate with and obtain data from existing Radiology Information Systems such as the Picture Archiving and Communication System (PACS). Our system design encompasses the broader aspects of the archive node, which could include multimedia data such as image, audio, video, and free text data. This system is designed to be integrated with current hospital PACS through a Digital Imaging and Communications in Medicine interface. However, the system can also be accessed through the Internet using Hypertext Transport Protocol or Simple File Transport Protocol. Our design and simulation work will be key to implementing a successful, scalable medical image archive and distribution system.

Processing, mosaicking and management of the Monterey Bay digital sidescan-sonar images

USGS Publications Warehouse

Chavez, P.S.; Isbrecht, J.; Galanis, P.; Gabel, G.L.; Sides, S.C.; Soltesz, D.L.; Ross, Stephanie L.; Velasco, M.G.

2002-01-01

Sidescan-sonar imaging systems with digital capabilities have now been available for approximately 20 years. In this paper we present several of the various digital image processing techniques developed by the U.S. Geological Survey (USGS) and used to apply intensity/radiometric and geometric corrections, as well as enhance and digitally mosaic, sidescan-sonar images of the Monterey Bay region. New software run by a WWW server was designed and implemented to allow very large image data sets, such as the digital mosaic, to be easily viewed interactively, including the ability to roam throughout the digital mosaic at the web site in either compressed or full 1-m resolution. The processing is separated into the two different stages: preprocessing and information extraction. In the preprocessing stage, sensor-specific algorithms are applied to correct for both geometric and intensity/radiometric distortions introduced by the sensor. This is followed by digital mosaicking of the track-line strips into quadrangle format which can be used as input to either visual or digital image analysis and interpretation. An automatic seam removal procedure was used in combination with an interactive digital feathering/stenciling procedure to help minimize tone or seam matching problems between image strips from adjacent track-lines. The sidescan-sonar image processing package is part of the USGS Mini Image Processing System (MIPS) and has been designed to process data collected by any 'generic' digital sidescan-sonar imaging system. The USGS MIPS software, developed over the last 20 years as a public domain package, is available on the WWW at: http://terraweb.wr.usgs.gov/trs/software.html.

Hospital information systems: experience at the fully digitized Seoul National University Bundang Hospital.

PubMed

Yoo, Sooyoung; Hwang, Hee; Jheon, Sanghoon

2016-08-01

The different levels of health information technology (IT) adoption and its integration into hospital workflow can affect the maximization of the benefits of using of health IT. We aimed at sharing our experiences and the journey to the successful adoption of health IT over 13 years at a tertiary university hospital in South Korea. The integrated system of comprehensive applications for direct care, support care, and smart care has been implemented with the latest IT and a rich user information platform, achieving the fully digitized hospital. The users experience design methodology, barcode and radio-frequency identification (RFID) technologies, smartphone and mobile technologies, and data analytics were integrated into hospital workflow. Applications for user-centered electronic medical record (EMR) and clinical decision support (CDS), closed loop medication administration (CLMA), mobile EMR and dashboard system for care coordination, clinical data warehouse (CDW) system, and patient engagement solutions were designed and developed to improve quality of care, work efficiency, and patient safety. We believe that comprehensive electronic health record systems and patient-centered smart hospital applications will go a long way in ensuring seamless patient care and experience.

Modernizing Immunization Practice Through the Use of Cloud Based Platforms.

PubMed

Bell, Cameron; Atkinson, Katherine M; Wilson, Kumanan

2017-04-01

Collection of timely and accurate immunization information is essential for effective immunization programs. Current immunization information systems have important limitations that impact the ability to collect this data. Based on our experience releasing a national immunization app we describe a cloud-based platform that would allow individuals to store their records digitally and exchange these records with public health information systems thus improving the quality of immunization information held by individuals and public health officials.

U.S. Geological Survey spatial data access

USGS Publications Warehouse

Faundeen, John L.; Kanengieter, Ronald L.; Buswell, Michael D.

2002-01-01

The U.S. Geological Survey (USGS) has done a progress review on improving access to its spatial data holdings over the Web. The USGS EROS Data Center has created three major Web-based interfaces to deliver spatial data to the general public; they are Earth Explorer, the Seamless Data Distribution System (SDDS), and the USGS Web Mapping Portal. Lessons were learned in developing these systems, and various resources were needed for their implementation. The USGS serves as a fact-finding agency in the U.S. Government that collects, monitors, analyzes, and provides scientific information about natural resource conditions and issues. To carry out its mission, the USGS has created and managed spatial data since its inception. Originally relying on paper maps, the USGS now uses advanced technology to produce digital representations of the Earth’s features. The spatial products of the USGS include both source and derivative data. Derivative datasets include Digital Orthophoto Quadrangles (DOQ), Digital Elevation Models, Digital Line Graphs, land-cover Digital Raster Graphics, and the seamless National Elevation Dataset. These products, created with automated processes, use aerial photographs, satellite images, or other cartographic information such as scanned paper maps as source data. With Earth Explorer, users can search multiple inventories through metadata queries and can browse satellite and DOQ imagery. They can place orders and make payment through secure credit card transactions. Some USGS spatial data can be accessed with SDDS. The SDDS uses an ArcIMS map service interface to identify the user’s areas of interest and determine the output format; it allows the user to either download the actual spatial data directly for small areas or place orders for larger areas to be delivered on media. The USGS Web Mapping Portal provides views of national and international datasets through an ArcIMS map service interface. In addition, the map portal posts news about new map services available from the USGS, many simultaneously published on the Environmental Systems Research Institute Geography Network. These three information systems use new software tools and expanded hardware to meet the requirements of the users. The systems are designed to handle the required workload and are relatively easy to enhance and maintain. The software tools give users a high level of functionality and help the system conform to industry standards. The hardware and software architecture is designed to handle the large amounts of spatial data and Internet traffic required by the information systems. Last, customer support was needed to answer questions, monitor e-mail, and report customer problems.

Network security system for health and medical information using smart IC card

NASA Astrophysics Data System (ADS)

Kanai, Yoichi; Yachida, Masuyoshi; Yoshikawa, Hiroharu; Yamaguchi, Masahiro; Ohyama, Nagaaki

1998-07-01

A new network security protocol that uses smart IC cards has been designed to assure the integrity and privacy of medical information in communication over a non-secure network. Secure communication software has been implemented as a library based on this protocol, which is called the Integrated Secure Communication Layer (ISCL), and has been incorporated into information systems of the National Cancer Center Hospitals and the Health Service Center of the Tokyo Institute of Technology. Both systems have succeeded in communicating digital medical information securely.

A systematic review of digital interactive television systems and their applications in the health and social care fields.

PubMed

Blackburn, Steven; Brownsell, Simon; Hawley, Mark S

2011-01-01

We conducted a systematic review of the applications and technical features of digital interactive television (DITV) in the health and social care fields. The Web of Knowledge and IEEE Xplore databases were searched for articles published between January 2000 and March 2010 which related to DITV systems facilitating the communication of information to/from an individual's home with either a health or social care application. Out of 1679 articles retrieved, 42 met the inclusion criteria and were selected for review. An additional 20 articles were obtained from online grey literature sources. Twenty-five DITV systems operating in health and social care were identified, including seven commercial systems. The most common applications were related to health care, such as vital signs monitoring (68% of systems) and health information or advice (56% of systems). The most common technical features of DITV systems were two-way communication (88%), medical peripherals (68%), on-screen messaging (48%) and video communication (36%). Digital interactive television has the potential to deliver health and social care to people in their own homes. However, the requirement for a high-bandwidth communications infrastructure, the usability of the systems, their level of personalisation and the lack of evidence regarding clinical and cost-effectiveness will all need to be addressed if this approach is to flourish.

The Commercial Challenges Of Pacs

NASA Astrophysics Data System (ADS)

Vanden Brink, John A.

1984-08-01

The increasing use of digital imaging techniques create a need for improved methods of digital processing, communication and archiving. However, the commercial opportunity is dependent on the resolution of a number of issues. These issues include proof that digital processes are more cost effective than present techniques, implementation of information system support in the imaging activity, implementation of industry standards, conversion of analog images to digital formats, definition of clinical needs, the implications of the purchase decision and technology requirements. In spite of these obstacles, a market is emerging, served by new and existing companies, that may become a $500 million market (U.S.) by 1990 for equipment and supplies.

Leadership at Play: How Leadership in Digital Games Can Inform the Future of Instructional Leadership

ERIC Educational Resources Information Center

Wolfenstein, Moses

2010-01-01

Over the course of the last several decades, K-12 educational systems have begun to adopt digital technologies to support teaching and learning. These tools have enabled the rise of online schools as well as fundamentally changing practices of school leadership. However little attention has been given to how instructional leadership is changed…

Building a Multi-Discipline Digital Library Through Extending the Dienst Protocol

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Shen, Stewart N. T.

1997-01-01

The purpose of this project is to establish multi-discipline capability for a unified, canonical digital library service for scientific and technical information (STI). This is accomplished by extending the Dienst Protocol to be aware of subject classification of a servers holdings. We propose a hierarchical, general, and extendible subject classification that can encapsulate existing classification systems.

It's Not All about the Music: Digital Goods, Social Media, and the Pressure of Peers

ERIC Educational Resources Information Center

Sopha, Matthew

2013-01-01

Social media offers a powerful platform for the independent digital content producer community to develop, disperse, and maintain their brands. In terms of information systems research, the broad majority of the work has not examined hedonic consumption on Social Media Sites (SMS). The focus has mostly been on the organizational perspectives and…

Enhancing Health-Care Services with Mixed Reality Systems

NASA Astrophysics Data System (ADS)

Stantchev, Vladimir

This work presents a development approach for mixed reality systems in health care. Although health-care service costs account for 5-15% of GDP in developed countries the sector has been remarkably resistant to the introduction of technology-supported optimizations. Digitalization of data storing and processing in the form of electronic patient records (EPR) and hospital information systems (HIS) is a first necessary step. Contrary to typical business functions (e.g., accounting or CRM) a health-care service is characterized by a knowledge intensive decision process and usage of specialized devices ranging from stethoscopes to complex surgical systems. Mixed reality systems can help fill the gap between highly patient-specific health-care services that need a variety of technical resources on the one side and the streamlined process flow that typical process supporting information systems expect on the other side. To achieve this task, we present a development approach that includes an evaluation of existing tasks and processes within the health-care service and the information systems that currently support the service, as well as identification of decision paths and actions that can benefit from mixed reality systems. The result is a mixed reality system that allows a clinician to monitor the elements of the physical world and to blend them with virtual information provided by the systems. He or she can also plan and schedule treatments and operations in the digital world depending on status information from this mixed reality.

Digital geologic map of the Spokane 1:100,000 quadrangle, Washington and Idaho: a digital database for the 1990 N.L. Joseph map

USGS Publications Warehouse

Johnson, Bruce R.; Derkey, Pamela D.

1998-01-01

Geologic data from the geologic map of the Spokane 1:100,000-scale quadrangle compiled by Joseph (1990) were entered into a geographic information system (GIS) as part of a larger effort to create regional digital geology for the Pacific Northwest. The map area is located in eastern Washington and extends across the state border into western Idaho (Fig. 1). This open-file report describes the methods used to convert the geologic map data into a digital format, documents the file structures, and explains how to download the digital files from the U.S. Geological Survey public access World Wide Web site on the Internet.

The Research of Paper Datum Mmanagement Information System

NASA Astrophysics Data System (ADS)

Zhigang, Ji; Gaifang, Niu; Lingxi, Liu

Now, paper management is becoming an important work in many colleges and universities, and the digitization of paper management is a significant constituent part of the information of college management. We have studied a universal framework of comprehensive management system spanning departments and geographical positions by taking the opportunity of the developing of the paper management system. The framework provides support for setting up large complicated distributed application fleetly, efficiently, expansively and safely, and it is a new project to realize the standardization of paper information management.

[Research and implementation of the TLS network transport security technology based on DICOM standard].

PubMed

Lu, Xiaoqi; Wang, Lei; Zhao, Jianfeng

2012-02-01

With the development of medical information, Picture Archiving and Communications System (PACS), Hospital Information System/Radiology Information System(HIS/RIS) and other medical information management system become popular and developed, and interoperability between these systems becomes more frequent. So, these enclosed systems will be open and regionalized by means of network, and this is inevitable. If the trend becomes true, the security of information transmission may be the first problem to be solved. Based on the need for network security, we investigated the Digital Imaging and Communications in Medicine (DICOM) Standard and Transport Layer Security (TLS) Protocol, and implemented the TLS transmission of the DICOM medical information with OpenSSL toolkit and DCMTK toolkit.

Cost benefit analysis of the transfer of NASA remote sensing technology to the state of Georgia

NASA Technical Reports Server (NTRS)

Zimmer, R. P. (Principal Investigator); Wilkins, R. D.; Kelly, D. L.; Brown, D. M.

1977-01-01

The author has identified the following significant results. First order benefits can generally be quantified, thus allowing quantitative comparisons of candidate land cover data systems. A meaningful dollar evaluation of LANDSAT can be made by a cost comparison with equally effective data systems. Users of LANDSAT data can be usefully categorized as performing three general functions: planning, permitting, and enforcing. The value of LANDSAT data to the State of Georgia is most sensitive to the parameters: discount rate, digitization cost, and photo acquisition cost. Under a constrained budget, LANDSAT could provide digitized land cover information roughly seven times more frequently than could otherwise be obtained. Thus on one hand, while the services derived from LANDSAT data in comparison to the baseline system has a positive net present value, on the other hand if the budget were constrained, more frequent information could be provided using the LANDSAT system than otherwise be obtained.

Atmospheric free-space coherent optical communications with adaptive optics

NASA Astrophysics Data System (ADS)

Ting, Chueh; Zhang, Chengyu; Yang, Zikai

2017-02-01

Free-space coherent optical communications have a potential application to offer last mile bottleneck solution in future local area networks (LAN) because of their information carrier, information security and license-free status. Coherent optical communication systems using orthogonal frequency division multiplexing (OFDM) digital modulation are successfully demonstrated in a long-haul tens Giga bits via optical fiber, but they are not yet available in free space due to atmospheric turbulence-induced channel fading. Adaptive optics is recognized as a promising technology to mitigate the effects of atmospheric turbulence in free-space optics. In this paper, a free-space coherent optical communication system using an OFDM digital modulation scheme and adaptive optics (FSO OFDM AO) is proposed, a Gamma-Gamma distribution statistical channel fading model for the FSO OFDM AO system is examined, and FSO OFDM AO system performance is evaluated in terms of bit error rate (BER) versus various propagation distances.

Digital database architecture and delineation methodology for deriving drainage basins, and a comparison of digitally and non-digitally derived numeric drainage areas

USGS Publications Warehouse

Dupree, Jean A.; Crowfoot, Richard M.

2012-01-01

The drainage basin is a fundamental hydrologic entity used for studies of surface-water resources and during planning of water-related projects. Numeric drainage areas published by the U.S. Geological Survey water science centers in Annual Water Data Reports and on the National Water Information Systems (NWIS) Web site are still primarily derived from hard-copy sources and by manual delineation of polygonal basin areas on paper topographic map sheets. To expedite numeric drainage area determinations, the Colorado Water Science Center developed a digital database structure and a delineation methodology based on the hydrologic unit boundaries in the National Watershed Boundary Dataset. This report describes the digital database architecture and delineation methodology and also presents the results of a comparison of the numeric drainage areas derived using this digital methodology with those derived using traditional, non-digital methods. (Please see report for full Abstract)

Virtual shelves in a digital library: a framework for access to networked information sources.

PubMed

Patrick, T B; Springer, G K; Mitchell, J A; Sievert, M E

1995-01-01

Develop a framework for collections-based access to networked information sources that addresses the problem of location-dependent access to information sources. This framework uses a metaphor of a virtual shelf. A virtual shelf is a general-purpose server that is dedicated to a particular information subject class. The identifier of one of these servers identifies its subject class. Location-independent call numbers are assigned to information sources. Call numbers are based on standard vocabulary codes. The call numbers are first mapped to the location-independent identifiers of virtual shelves. When access to an information resource is required, a location directory provides a second mapping of these location-independent server identifiers to actual network locations. The framework has been implemented in two different systems. One system is based on the Open System Foundation/Distributed Computing Environment and the other is based on the World Wide Web. This framework applies in new ways traditional methods of library classification and cataloging. It is compatible with two traditional styles of selecting information searching and browsing. Traditional methods may be combined with new paradigms of information searching that will be able to take advantage of the special properties of digital information. Cooperation between the library-informational science community and the informatics community can provide a means for a continuing application of the knowledge and techniques of library science to the new problems of networked information sources.

Italian University Students and Digital Technologies: Some Results from a Field Research

NASA Astrophysics Data System (ADS)

Ferri, Paolo; Cavalli, Nicola; Costa, Elisabetta; Mangiatordi, Andrea; Mizzella, Stefano; Pozzali, Andrea; Scenini, Francesca

Developments in information and communication technologies have raised the issue of how a kind of intergenerational digital divide can take place between "digital natives" and "digital immigrants". This can in turn have important consequences for the organization of educative systems. In this paper we present the result of a research performed during the course of 2008 to study how university students in Italy make use of digital technologies. The methodology was based on a mix of quantitative and qualitative approaches. A survey research was done, on a sample of 1186 students of the University of Milan-Bicocca, based on a questionnaire administrated through the Intranet of the University. A series of focus groups and in depth interviews with students, parents, and new media experts was furthermore performed. The results are consistent with the presence of a strong intergenerational divide. The implications of the results for the future organization of educative systems are discussed in the paper.

Standard Health Level Seven for Odontological Digital Imaging

PubMed Central

Abril-Gonzalez, Mauricio; Portilla, Fernando A.

2017-01-01

Abstract Background: A guide for the implementation of dental digital imaging reports was developed and validated through the International Standard of Health Informatics–Health Level Seven (HL7), achieving interoperability with an electronic system that keeps dental records. Introduction: Digital imaging benefits patients, who can view previous close-ups of dental examinations; providers, because of greater efficiency in managing information; and insurers, because of improved accessibility, patient monitoring, and more efficient cost management. Finally, imaging is beneficial for the dentist who can be more agile in the diagnosis and treatment of patients using this tool. Materials and Methods: The guide was developed under the parameters of an HL7 standard. It was necessary to create a group of dentists and three experts in information and communication technologies from different institutions. Discussion: Diagnostic images scanned with conventional radiology or from a radiovisiograph can be converted to Digital Imaging and Communications in Medicine (DICOM) format, while also retaining patient information. The guide shows how the information of the health record of the patient and the information of the dental image could be standardized in a Clinical Dental Record document using international informatics standard like HL7-V3-CDA document (dental document Level 2). Since it is an informatics standardized document, it could be sent, stored, or displayed using different devices—personal computers or mobile devices—independent of the platform used. Conclusions: Interoperability using dental images and dental record systems reduces adverse events, increases security for the patient, and makes more efficient use of resources. This article makes a contribution to the field of telemedicine in dental informatics. In addition to that, the results could be a reference for projects of electronic medical records when the dental documents are part of them. PMID:27248059

Standard Health Level Seven for Odontological Digital Imaging.

PubMed

Abril-Gonzalez, Mauricio; Portilla, Fernando A; Jaramillo-Mejia, Marta C

2017-01-01

A guide for the implementation of dental digital imaging reports was developed and validated through the International Standard of Health Informatics-Health Level Seven (HL7), achieving interoperability with an electronic system that keeps dental records. Digital imaging benefits patients, who can view previous close-ups of dental examinations; providers, because of greater efficiency in managing information; and insurers, because of improved accessibility, patient monitoring, and more efficient cost management. Finally, imaging is beneficial for the dentist who can be more agile in the diagnosis and treatment of patients using this tool. The guide was developed under the parameters of an HL7 standard. It was necessary to create a group of dentists and three experts in information and communication technologies from different institutions. Diagnostic images scanned with conventional radiology or from a radiovisiograph can be converted to Digital Imaging and Communications in Medicine (DICOM) format, while also retaining patient information. The guide shows how the information of the health record of the patient and the information of the dental image could be standardized in a Clinical Dental Record document using international informatics standard like HL7-V3-CDA document (dental document Level 2). Since it is an informatics standardized document, it could be sent, stored, or displayed using different devices-personal computers or mobile devices-independent of the platform used. Interoperability using dental images and dental record systems reduces adverse events, increases security for the patient, and makes more efficient use of resources. This article makes a contribution to the field of telemedicine in dental informatics. In addition to that, the results could be a reference for projects of electronic medical records when the dental documents are part of them.

Evaluation of a Digital Companion for Older Adults with Mild Cognitive Impairment

PubMed Central

Demiris, George; Thompson, Hilaire J.; Lazar, Amanda; Lin, Shih-Yin

2016-01-01

Study Objective: The purpose of this study was to examine the feasibility of a digital companion system used by older adults with mild cognitive impairment (MCI). We utilized a commercially available system that is comprehensive in its functionalities (including conversation ability, use of pictures and other media, and reminders) to explore the system’s impact on older adults ‘ social interactions, anxiety, depressive symptoms, and acceptance of the system. Study Design: We conducted a three-month mixed methods evaluation study of the digital companion. Results: Ten female community-dwelling older adults (average age 78.3 years) participated in the study. Overall, participants utilized the tool regularly and appreciated its presence and their interactions. Participants scored higher at the end of the study in cognition and social support scales, and lower in presence of depressive symptoms. Conclusion: Findings indicate the feasibility of a digital companion for people with MCI and inform the need for additional research. PMID:28269845

Digital Stratigraphy: Contextual Analysis of File System Traces in Forensic Science.

PubMed

Casey, Eoghan

2017-12-28

This work introduces novel methods for conducting forensic analysis of file allocation traces, collectively called digital stratigraphy. These in-depth forensic analysis methods can provide insight into the origin, composition, distribution, and time frame of strata within storage media. Using case examples and empirical studies, this paper illuminates the successes, challenges, and limitations of digital stratigraphy. This study also shows how understanding file allocation methods can provide insight into concealment activities and how real-world computer usage can complicate digital stratigraphy. Furthermore, this work explains how forensic analysts have misinterpreted traces of normal file system behavior as indications of concealment activities. This work raises awareness of the value of taking the overall context into account when analyzing file system traces. This work calls for further research in this area and for forensic tools to provide necessary information for such contextual analysis, such as highlighting mass deletion, mass copying, and potential backdating. © 2017 American Academy of Forensic Sciences.

Indoor Navigation by People with Visual Impairment Using a Digital Sign System

PubMed Central

Legge, Gordon E.; Beckmann, Paul J.; Tjan, Bosco S.; Havey, Gary; Kramer, Kevin; Rolkosky, David; Gage, Rachel; Chen, Muzi; Puchakayala, Sravan; Rangarajan, Aravindhan

2013-01-01

There is a need for adaptive technology to enhance indoor wayfinding by visually-impaired people. To address this need, we have developed and tested a Digital Sign System. The hardware and software consist of digitally-encoded signs widely distributed throughout a building, a handheld sign-reader based on an infrared camera, image-processing software, and a talking digital map running on a mobile device. Four groups of subjects—blind, low vision, blindfolded sighted, and normally sighted controls—were evaluated on three navigation tasks. The results demonstrate that the technology can be used reliably in retrieving information from the signs during active mobility, in finding nearby points of interest, and following routes in a building from a starting location to a destination. The visually impaired subjects accurately and independently completed the navigation tasks, but took substantially longer than normally sighted controls. This fully functional prototype system demonstrates the feasibility of technology enabling independent indoor navigation by people with visual impairment. PMID:24116156

Experimental demonstration of quantum digital signatures using phase-encoded coherent states of light

PubMed Central

Clarke, Patrick J.; Collins, Robert J.; Dunjko, Vedran; Andersson, Erika; Jeffers, John; Buller, Gerald S.

2012-01-01

Digital signatures are frequently used in data transfer to prevent impersonation, repudiation and message tampering. Currently used classical digital signature schemes rely on public key encryption techniques, where the complexity of so-called ‘one-way' mathematical functions is used to provide security over sufficiently long timescales. No mathematical proofs are known for the long-term security of such techniques. Quantum digital signatures offer a means of sending a message, which cannot be forged or repudiated, with security verified by information-theoretical limits and quantum mechanics. Here we demonstrate an experimental system, which distributes quantum signatures from one sender to two receivers and enables message sending ensured against forging and repudiation. Additionally, we analyse the security of the system in some typical scenarios. Our system is based on the interference of phase-encoded coherent states of light and our implementation utilizes polarization-maintaining optical fibre and photons with a wavelength of 850 nm. PMID:23132024

Development of a digital-micromirror-device-based multishot snapshot spectral imaging system.

PubMed

Wu, Yuehao; Mirza, Iftekhar O; Arce, Gonzalo R; Prather, Dennis W

2011-07-15

We report on the development of a digital-micromirror-device (DMD)-based multishot snapshot spectral imaging (DMD-SSI) system as an alternative to current piezostage-based multishot coded aperture snapshot spectral imager (CASSI) systems. In this system, a DMD is used to implement compressive sensing (CS) measurement patterns for reconstructing the spatial/spectral information of an imaging scene. Based on the CS measurement results, we demonstrated the concurrent reconstruction of 24 spectral images. The DMD-SSI system is versatile in nature as it can be used to implement independent CS measurement patterns in addition to spatially shifted patterns that piezostage-based systems can offer. © 2011 Optical Society of America

Geologic Map of the Tucson and Nogales Quadrangles, Arizona (Scale 1:250,000): A Digital Database

USGS Publications Warehouse

Peterson, J.A.; Berquist, J.R.; Reynolds, S.J.; Page-Nedell, S. S.; Digital database by Oland, Gustav P.; Hirschberg, Douglas M.

2001-01-01

The geologic map of the Tucson-Nogales 1:250,000 scale quadrangle (Peterson and others, 1990) was digitized by U.S. Geological Survey staff and University of Arizona contractors at the Southwest Field Office, Tucson, Arizona, in 2000 for input into a geographic information system (GIS). The database was created for use as a basemap in a decision support system designed by the National Industrial Minerals and Surface Processes project. The resulting digital geologic map database can be queried in many ways to produce a variety of geologic maps. Digital base map data files (topography, roads, towns, rivers and lakes, etc.) are not included; they may be obtained from a variety of commercial and government sources. Additionally, point features, such as strike and dip, were not captured from the original paper map and are not included in the database. This database is not meant to be used or displayed at any scale larger than 1:250,000 (for example, 1:100,000 or 1:24,000). The digital geologic map graphics and plot files that are provided in the digital package are representations of the digital database. They are not designed to be cartographic products.

Legacy system integration using web technology

NASA Astrophysics Data System (ADS)

Kennedy, Richard L.; Seibert, James A.; Hughes, Chris J.

2000-05-01

As healthcare moves towards a completely digital, multimedia environment there is an opportunity to provide for cost- effective, highly distributed physician access to clinical information including radiology-based imaging. In order to address this opportunity a Universal Clinical Desktop (UCD) system was developed. A UCD provides a single point of entry into an integrated view of all types of clinical data available within a network of disparate healthcare information systems. In order to explore the application of a UCD in a hospital environment, a pilot study was established with the University of California Davis Medical Center using technology from Trilix Information Systems. Within this pilot environment the information systems integrated under the UCD include a radiology information system (RIS), a picture archive and communication system (PACS) and a laboratory information system (LIS).

Importance of hydrologic data for interpreting wetland maps and assessing wetland loss and mitigation

USGS Publications Warehouse

Carter, V.

1991-01-01

The US Geological Survey collects and disseminates, in written and digital formats, groundwater and surface-water information related to the tidal and nontidal wetlands of the United States. This information includes quantity, quality, and availability of groundwater and surface water; groundwater and surface-water interactions (recharge-discharge); groundwater flow; and the basic surface-water characteristics of streams, rivers, lakes, and wetlands. Water resources information in digital format can be used in geographic information systems (GISs) for many purposes related to wetlands. US Geological Survey wetland-related activities include collection of information important for assessing and mitigating coastal wetland loss and modification, hydrologic data collection and interpretation, GIS activities, identification of national trends in water quality and quantity, and process-oriented wetland research. -Author

A design for the geoinformatics system

NASA Astrophysics Data System (ADS)

Allison, M. L.

2002-12-01

Informatics integrates and applies information technologies with scientific and technical disciplines. A geoinformatics system targets the spatially based sciences. The system is not a master database, but will collect pertinent information from disparate databases distributed around the world. Seamless interoperability of databases promises quantum leaps in productivity not only for scientific researchers but also for many areas of society including business and government. The system will incorporate: acquisition of analog and digital legacy data; efficient information and data retrieval mechanisms (via data mining and web services); accessibility to and application of visualization, analysis, and modeling capabilities; online workspace, software, and tutorials; GIS; integration with online scientific journal aggregates and digital libraries; access to real time data collection and dissemination; user-defined automatic notification and quality control filtering for selection of new resources; and application to field techniques such as mapping. In practical terms, such a system will provide the ability to gather data over the Web from a variety of distributed sources, regardless of computer operating systems, database formats, and servers. Search engines will gather data about any geographic location, above, on, or below ground, covering any geologic time, and at any scale or detail. A distributed network of digital geolibraries can archive permanent copies of databases at risk of being discontinued and those that continue to be maintained by the data authors. The geoinformatics system will generate results from widely distributed sources to function as a dynamic data network. Instead of posting a variety of pre-made tables, charts, or maps based on static databases, the interactive dynamic system creates these products on the fly, each time an inquiry is made, using the latest information in the appropriate databases. Thus, in the dynamic system, a map generated today may differ from one created yesterday and one to be created tomorrow, because the databases used to make it are constantly (and sometimes automatically) being updated.

Image gathering and coding for digital restoration: Information efficiency and visual quality

NASA Technical Reports Server (NTRS)

Huck, Friedrich O.; John, Sarah; Mccormick, Judith A.; Narayanswamy, Ramkumar

1989-01-01

Image gathering and coding are commonly treated as tasks separate from each other and from the digital processing used to restore and enhance the images. The goal is to develop a method that allows us to assess quantitatively the combined performance of image gathering and coding for the digital restoration of images with high visual quality. Digital restoration is often interactive because visual quality depends on perceptual rather than mathematical considerations, and these considerations vary with the target, the application, and the observer. The approach is based on the theoretical treatment of image gathering as a communication channel (J. Opt. Soc. Am. A2, 1644(1985);5,285(1988). Initial results suggest that the practical upper limit of the information contained in the acquired image data range typically from approximately 2 to 4 binary information units (bifs) per sample, depending on the design of the image-gathering system. The associated information efficiency of the transmitted data (i.e., the ratio of information over data) ranges typically from approximately 0.3 to 0.5 bif per bit without coding to approximately 0.5 to 0.9 bif per bit with lossless predictive compression and Huffman coding. The visual quality that can be attained with interactive image restoration improves perceptibly as the available information increases to approximately 3 bifs per sample. However, the perceptual improvements that can be attained with further increases in information are very subtle and depend on the target and the desired enhancement.

Remote sensing and geographically based information systems

NASA Technical Reports Server (NTRS)

Cicone, R. C.

1977-01-01

A structure is proposed for a geographically-oriented computer-based information system applicable to the analysis of remote sensing digital data. The structure, intended to answer a wide variety of user needs, would permit multiple views of the data, provide independent management of data security, quality and integrity, and rely on automatic data filing. Problems in geographically-oriented data systems, including those related to line encoding and cell encoding, are considered.

Massively parallel information processing systems for space applications

NASA Technical Reports Server (NTRS)

Schaefer, D. H.

1979-01-01

NASA is developing massively parallel systems for ultra high speed processing of digital image data collected by satellite borne instrumentation. Such systems contain thousands of processing elements. Work is underway on the design and fabrication of the 'Massively Parallel Processor', a ground computer containing 16,384 processing elements arranged in a 128 x 128 array. This computer uses existing technology. Advanced work includes the development of semiconductor chips containing thousands of feedthrough paths. Massively parallel image analog to digital conversion technology is also being developed. The goal is to provide compact computers suitable for real-time onboard processing of images.

Telemedicine optoelectronic biomedical data processing system

NASA Astrophysics Data System (ADS)

Prosolovska, Vita V.

2010-08-01

The telemedicine optoelectronic biomedical data processing system is created to share medical information for the control of health rights and timely and rapid response to crisis. The system includes the main blocks: bioprocessor, analog-digital converter biomedical images, optoelectronic module for image processing, optoelectronic module for parallel recording and storage of biomedical imaging and matrix screen display of biomedical images. Rated temporal characteristics of the blocks defined by a particular triggering optoelectronic couple in analog-digital converters and time imaging for matrix screen. The element base for hardware implementation of the developed matrix screen is integrated optoelectronic couples produced by selective epitaxy.

Synthetic analog and digital circuits for cellular computation and memory.

PubMed

Purcell, Oliver; Lu, Timothy K

2014-10-01

Biological computation is a major area of focus in synthetic biology because it has the potential to enable a wide range of applications. Synthetic biologists have applied engineering concepts to biological systems in order to construct progressively more complex gene circuits capable of processing information in living cells. Here, we review the current state of computational genetic circuits and describe artificial gene circuits that perform digital and analog computation. We then discuss recent progress in designing gene networks that exhibit memory, and how memory and computation have been integrated to yield more complex systems that can both process and record information. Finally, we suggest new directions for engineering biological circuits capable of computation. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

High Resolution Multispectral and Hyperspectral Data Fusion for Advanced Geospatial Information Products

DTIC Science & Technology

2007-03-01

instrumentation was provided under a cooperative agreement with the Applanix Systems Integration Group (ASIG), a subsidiary of the Trimble Corporation. This MSI...system (Digital Sensor System; http://www.applanix.com/products/dss index.php) was provided as part of the Applanix Position and Orientation System (POS

The Picture Exchange Communication System: Digital Photographs versus Picture Symbols

ERIC Educational Resources Information Center

Jonaitis, Carmen

2011-01-01

The Picture Exchange Communication System (PECS) is an augmentative and alternative system (AAC) used to improve and increase communication for children with Autism Spectrum Disorder (ASD) and other developmental disorders. Research addressing the efficacy of this system is increasing; however, there is limited information published that evaluates…

Digital image compression for a 2f multiplexing optical setup

NASA Astrophysics Data System (ADS)

Vargas, J.; Amaya, D.; Rueda, E.

2016-07-01

In this work a virtual 2f multiplexing system was implemented in combination with digital image compression techniques and redundant information elimination. Depending on the image type to be multiplexed, a memory-usage saving of as much as 99% was obtained. The feasibility of the system was tested using three types of images, binary characters, QR codes, and grey level images. A multiplexing step was implemented digitally, while a demultiplexing step was implemented in a virtual 2f optical setup following real experimental parameters. To avoid cross-talk noise, each image was codified with a specially designed phase diffraction carrier that would allow the separation and relocation of the multiplexed images on the observation plane by simple light propagation. A description of the system is presented together with simulations that corroborate the method. The present work may allow future experimental implementations that will make use of all the parallel processing capabilities of optical systems.