Synthesis and application of polyepoxide cardanol glycidyl ether as biobased polyepoxide reactive diluent for epoxy resin

USDA-ARS?s Scientific Manuscript database

Polyepoxide cardanol glycidyl ether (PECGE), a novel cardanol derivative, was synthesized and used as reactive diluent for petroleum-based epoxy resin in this work. The synthetic condition was first optimized, and the resultant PECGE diluent was characterized using Fourier transform infrared spectro...

Polymer composites and porous materials prepared by thermally induced phase separation and polymer-metal hybrid methods

NASA Astrophysics Data System (ADS)

Yoon, Joonsung

The primary objective of this research is to investigate the morphological and mechanical properties of composite materials and porous materials prepared by thermally induced phase separation. High melting crystallizable diluents were mixed with polymers so that the phase separation would be induced by the solidification of the diluents upon cooling. Theoretical phase diagrams were calculated using Flory-Huggins solution thermodynamics which show good agreement with the experimental results. Porous materials were prepared by the extraction of the crystallized diluents after cooling the mixtures (hexamethylbenzene/polyethylene and pyrene/polyethylene). Anisotropic structures show strong dependence on the identity of the diluents and the composition of the mixtures. Anisotropic crystal growth of the diluents was studied in terms of thermodynamics and kinetics using DSC, optical microscopy and SEM. Microstructures of the porous materials were explained in terms of supercooling and dendritic solidification. Dual functionality of the crystallizable diluents for composite materials was evaluated using isotactic polypropylene (iPP) and compatible diluents that crystallize upon cooling. The selected diluents form homogeneous mixtures with iPP at high temperature and lower the viscosity (improved processability), which undergo phase separation upon cooling to form solid particles that function as a toughening agent at room temperature. Tensile properties and morphology of the composites showed that organic crystalline particles have the similar effect as rigid particles to increase toughness; de-wetting between the particle and iPP matrix occurs at the early stage of deformation, followed by unhindered plastic flow that consumes significant amount of fracture energy. The effect of the diluents, however, strongly depends on the identity of the diluents that interact with the iPP during solidification step, which was demonstrated by comparing tetrabromobisphenol-A and phthalic anhydride. A simple method to prepare composite surfaces that can change the wettability in response to the temperature change was proposed and evaluated. Composite surfaces prepared by nanoporous alumina templates filled with polymers showed surface morphology and wettability that depend on temperature. This effect is attributed to the significant difference in thermal conductivity and the thermal expansion coefficient between the alumina and the polymers. The reversibility in thermal response depends on the properties of the polymers.

Lactose-egg yolk diluent supplemented with N-acetyl-D-glucosamine affect acrosome morphology and motility of frozen-thawed boar sperm.

PubMed

Yi, Y J; Im, G S; Park, C S

2002-12-16

These experiments were carried out to investigate the effect of N-acetyl-D-glucosamine, and to obtain additional information about the effect of orvus es paste (OEP) and egg yolk concentration in the freezing of boar sperm in the maxi-straw. The highest post-thaw acrosomes of normal apical ridge (NAR) and motility were obtained with 0.025 or 0.05% N-acetyl-D-glucosamine concentration in the first diluent. However, there were no effects of N-acetyl-D-glucosamine among the diluents with or without N-acetyl-D-glucosamine at the second dilution. The N-acetyl-D-glucosamine in the first and second diluents was added at room temperatures (20-23 degrees C) and 5 degrees C, respectively. It is suggested that the temperature of N-acetyl-D-glucosamine addition is important for the effect of boar sperm protection during freezing and thawing. When the 0.05% N-acetyl-D-glucosamine was supplemented in the first diluent, the optimum final OEP content was 0.5%. The optimum content of egg yolk in the diluent with 0.05% N-acetyl-D-glucosamine concentration was 20% and egg yolk was one of the main cryoprotective agents. In conclusion, we found out that the diluent with 0.025 or 0.05% soluble N-acetyl-D-glucosamine in the first diluent, 0.5% final orvus es paste concentration and 20% egg yolk concentration significantly enhanced NAR acrosomes and motility of boar sperm after freezing and thawing. Copyright 2002 Elsevier Science B.V.

21 CFR 73.1 - Diluents in color additive mixtures for food use exempt from certification.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Diluents in color additive mixtures for food use... HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Foods § 73.1 Diluents in color additive mixtures for food use exempt from certification. The following substances may be...

21 CFR 73.1 - Diluents in color additive mixtures for food use exempt from certification.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Diluents in color additive mixtures for food use... HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Foods § 73.1 Diluents in color additive mixtures for food use exempt from certification. The following substances may be...

21 CFR 73.1 - Diluents in color additive mixtures for food use exempt from certification.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Diluents in color additive mixtures for food use... HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Foods § 73.1 Diluents in color additive mixtures for food use exempt from certification. The following substances may be...

21 CFR 73.1 - Diluents in color additive mixtures for food use exempt from certification.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Diluents in color additive mixtures for food use... HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Foods § 73.1 Diluents in color additive mixtures for food use exempt from certification. The following substances may be...

21 CFR 73.1 - Diluents in color additive mixtures for food use exempt from certification.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Diluents in color additive mixtures for food use... HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Foods § 73.1 Diluents in color additive mixtures for food use exempt from certification. The following substances may be...

21 CFR 73.1001 - Diluents in color additive mixtures for drug use exempt from certification.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Diluents in color additive mixtures for drug use..., DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1001 Diluents in color additive mixtures for drug use exempt from certification. The following...

Method for Performing Aerobic Plate Counts of Anhydrous Cosmetics Utilizing Tween 60 and Arlacel 80 as Dispersing Agents

PubMed Central

McConville, John F.; Anger, Claude B.; Anderson, David W.

1974-01-01

An aqueous diluent containing Tween 60 and Arlacel 80 gave greater recovery of microorganisms when compared with two common diluents as determined by aerobic plate count of inoculated anhydrous cosmetics. The greater recovery was caused by better dispersion of the anhydrous cosmetics in the diluents. Images PMID:4203790

A systematic investigation of sample diluents in modern supercritical fluid chromatography.

PubMed

Desfontaine, Vincent; Tarafder, Abhijit; Hill, Jason; Fairchild, Jacob; Grand-Guillaume Perrenoud, Alexandre; Veuthey, Jean-Luc; Guillarme, Davy

2017-08-18

This paper focuses on the possibility to inject large volumes (up to 10μL) in ultra-high performance supercritical fluid chromatography (UHPSFC) under generic gradient conditions. Several injection and method parameters have been individually evaluated (i.e. analyte concentration, injection volume, initial percentage of co-solvent in the gradient, nature of the weak needle wash solvent, nature of the sample diluent, nature of the column and of the analyte). The most critical parameters were further investigated using in a multivariate approach. The overall results suggested that several aprotic solvents including methyl tert-butyl ether (MTBE), dichloromethane, acetonitrile or cyclopentyl methyl ether (CPME) were well adapted for the injection of large volume in UHPSFC, while MeOH was generally the worst alternative. However, the nature of the stationary phase also had a strong impact and some of these diluents did not perform equally on each column. This was due to the existence of a competition in the adsorption of the analyte and the diluent on the stationary phase. This observation introduced the idea that the sample diluent should not only be chosen according to the analyte but also to the column chemistry to limit the interactions between the diluent and the ligands. Other important characteristics of the "ideal" SFC sample diluent were finally highlighted. Aprotic solvents with low viscosity are preferable to avoid strong solvent effects and viscous fingering, respectively. In the end, the authors suggest that the choice of the sample diluent should be part of the method development, as a function of the analyte and the selected stationary phase. Copyright © 2017 Elsevier B.V. All rights reserved.

40 CFR 60.1745 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2010 CFR

2010-07-01

... carbon dioxide instead of oxygen as a diluent gas? 60.1745 Section 60.1745 Protection of Environment... choose to monitor carbon dioxide instead of oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the initial evaluation of your continuous emission monitoring...

40 CFR 60.1745 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2012 CFR

2012-07-01

... carbon dioxide instead of oxygen as a diluent gas? 60.1745 Section 60.1745 Protection of Environment... choose to monitor carbon dioxide instead of oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the initial evaluation of your continuous emission monitoring...

40 CFR 60.1745 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2014 CFR

2014-07-01

... carbon dioxide instead of oxygen as a diluent gas? 60.1745 Section 60.1745 Protection of Environment... choose to monitor carbon dioxide instead of oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the initial evaluation of your continuous emission monitoring...

40 CFR 60.1745 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2011 CFR

2011-07-01

... carbon dioxide instead of oxygen as a diluent gas? 60.1745 Section 60.1745 Protection of Environment... choose to monitor carbon dioxide instead of oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the initial evaluation of your continuous emission monitoring...

40 CFR 60.1745 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2013 CFR

2013-07-01

... carbon dioxide instead of oxygen as a diluent gas? 60.1745 Section 60.1745 Protection of Environment... choose to monitor carbon dioxide instead of oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the initial evaluation of your continuous emission monitoring...

Indirect measurement of diluents in a multi-component natural gas

DOEpatents

Morrow, Thomas B.; Owen, Thomas E.

2006-03-07

A method of indirectly measuring the diluent (nitrogen and carbon dioxide) concentrations in a natural gas mixture. The molecular weight of the gas is modeled as a function of the speed of sound in the gas, the diluent concentrations in the gas, and constant values, resulting in a model equation. A set of reference gas mixtures with known molecular weights and diluent concentrations is used to calculate the constant values. For the gas in question, if the speed of sound in the gas is measured at three states, the three resulting expressions of molecular weight can be solved for the nitrogen and carbon dioxide concentrations in the gas mixture.

Controlling exhaust gas recirculation

DOEpatents

Zurlo, James Richard [Madison, WI; Konkle, Kevin Paul [West Bend, WI; May, Andrew [Milwaukee, WI

2012-01-31

In controlling an engine, an amount of an intake charge provided, during operation of the engine, to a combustion chamber of the engine is determined. The intake charge includes an air component, a fuel component and a diluent component. An amount of the air component of the intake charge is determined. An amount of the diluent component of the intake charge is determined utilizing the amount of the intake charge, the amount of the air component and, in some instances, the amount of the fuel component. An amount of a diluent supplied to the intake charge is adjusted based at least in part on the determined amount of diluent component of the intake charge.

Comparison of commercial diluents for holding turkey semen 24 hours at 5 C.

PubMed

Sexton, T J

1988-01-01

The ability was examined of three commercial turkey semen diluents, Beltsville Poultry Semen Extender II (BPSE), Instruments for Veterinary Medicine (IMV), and Minnesota Turkey Growers Association (MTGA) and two diluents containing antibiotics, BPSE + tobramycin (T) and MTGA + gentamicin (G), to maintain the fertilizing capacity of turkey semen held for 24 h at 5 C. Hens were inseminated weekly with 200 million viable spermatozoa for 15 wk. Fertility of unstored, diluted (1:1) semen in MTGA + G (90%) was significantly lower than semen diluted in BPSE (95%) or IMV (95%). Fertilizing capacity of spermatozoa diluted in BPSE + T (94%) and MTGA (91%) was not different from that of semen diluted in the other diluents. Fertility of semen stored for 24 h was highest stored in BPSE (77%) followed by values for storage in BPSE + T (64%), MTGA + G (60%), MTGA (41%), and IMV (38%). Fertility was affected by a significant interaction between semen diluent and storage time. When compared with effects of storage in both Beltsville extenders, spermatozoa stored in the other diluents were less motile. Spermatozoa stored in all extenders except BPSE had a high rate of lysis.

40 CFR 62.15200 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2012 CFR

2012-07-01

... carbon dioxide instead of oxygen as a diluent gas? 62.15200 Section 62.15200 Protection of Environment... I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the initial evaluation of your continuous...

40 CFR 62.15200 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2010 CFR

2010-07-01

... carbon dioxide instead of oxygen as a diluent gas? 62.15200 Section 62.15200 Protection of Environment... I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the initial evaluation of your continuous...

40 CFR 62.15200 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2011 CFR

2011-07-01

... carbon dioxide instead of oxygen as a diluent gas? 62.15200 Section 62.15200 Protection of Environment... I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the initial evaluation of your continuous...

40 CFR 62.15200 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2014 CFR

2014-07-01

... carbon dioxide instead of oxygen as a diluent gas? 62.15200 Section 62.15200 Protection of Environment... I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the initial evaluation of your continuous...

40 CFR 62.15200 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2013 CFR

2013-07-01

... carbon dioxide instead of oxygen as a diluent gas? 62.15200 Section 62.15200 Protection of Environment... I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the initial evaluation of your continuous...

40 CFR 60.1255 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2013 CFR

2013-07-01

... carbon dioxide instead of oxygen as a diluent gas? 60.1255 Section 60.1255 Protection of Environment... oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the... Method 3A or 3B in appendix A of this part to determine oxygen concentration at the location of your...

40 CFR 60.1255 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2010 CFR

2010-07-01

... carbon dioxide instead of oxygen as a diluent gas? 60.1255 Section 60.1255 Protection of Environment... oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the... Method 3A or 3B in appendix A of this part to determine oxygen concentration at the location of your...

40 CFR 60.1255 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2012 CFR

2012-07-01

... carbon dioxide instead of oxygen as a diluent gas? 60.1255 Section 60.1255 Protection of Environment... oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the... Method 3A or 3B in appendix A of this part to determine oxygen concentration at the location of your...

40 CFR 60.1255 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2014 CFR

2014-07-01

... carbon dioxide instead of oxygen as a diluent gas? 60.1255 Section 60.1255 Protection of Environment... oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the... Method 3A or 3B in appendix A of this part to determine oxygen concentration at the location of your...

40 CFR 60.1255 - What must I do if I choose to monitor carbon dioxide instead of oxygen as a diluent gas?

Code of Federal Regulations, 2011 CFR

2011-07-01

... carbon dioxide instead of oxygen as a diluent gas? 60.1255 Section 60.1255 Protection of Environment... oxygen as a diluent gas? You must establish the relationship between oxygen and carbon dioxide during the... Method 3A or 3B in appendix A of this part to determine oxygen concentration at the location of your...

PERFORMANCE OF A HIGH-VELOCITY PROPELLANT GUN FOR CONTROLLED IMPACTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graham, R.A.; Ingram, G.E.; Ingram, W.D.

1961-11-01

Greatly enhanced extractions (synergism) for di, tri, and tetravalent metals were reported for the system M(sup n+/ HTTA/S/diluent where HTTA is thenolytrifluoracetone and S varies from the Highly polar tri-octyl phosphine oxide to the weakly basic triphenyl phosphate. The extracted speenes the partition coefficients of thc metal ion vary over several powers of ten, sometimes by a factor much greater than that obtained by the synergic effect itself. Thc citect. oa the extraction, of so-called inert diluents such as cyclohexane, hexane, carbon tetrachloride, benzene, and chloroform was studied under various conditions. In all cases the distribution ratio decreases as themore » diluent ns changed from cyclobexane in the above sequence, chloroform giving the lowest partition coefficient. This order is in the same sequence as the water solubility in the pure diluent and the diluent effect on metal extraction ns probably connected through the diluent water content with tbe permanent or induced diluent dipole. (auth) The performance of an extensively modified U. S. Army 40-mm gun for producing controlled impacts is described. Various projectile velocities in the range of 200 fps to 3200 fps were achieved by varying the amount of a fastburning propellant. The desired velocity may be varied in small increments. lmpact occurs while the projectile is being guided by the bore of the gun, thus facilitating precise alignment between the impacting surface of the projectile and the target specimen. Evacuating the barrel between the projectile and target eliminates undesired air cushioning to insure a step function impact. Projectile velocity measurements are made just prior to impact. (auth)« less

Insidious Harm of Medication Diluents as a Contributor to Cumulative Volume and Hyperchloremia: A Prospective, Open-Label, Sequential Period Pilot Study.

PubMed

Magee, Carolyn A; Bastin, Melissa L Thompson; Laine, Melanie E; Bissell, Brittany D; Howington, Gavin T; Moran, Peter R; McCleary, Emily J; Owen, Gary D; Kane, Lauren E; Higdon, Emily A; Pierce, Cathy A; Morris, Peter E; Flannery, Alexander H

2018-05-04

Although the potential dangers of hyperchloremia from resuscitation fluids continue to emerge, no study to date has considered the contribution of medication diluents to cumulative volume and hyperchloremia. This study compares saline versus dextrose 5% in water as the primary medication diluent and the occurrence of hyperchloremia in critically ill patients. Prospective, open-label, sequential period pilot study. Medical ICU of a large academic medical center. Adult patients admitted to the medical ICU were eligible for inclusion. Patients who were admitted for less than 48 hours, less than 18 years old, pregnant, incarcerated, or who had brain injury were excluded. Saline as the primary medication diluent for 2 months followed by dextrose 5% in water as the primary medication diluent for 2 months. A total of 426 patients were included, 216 in the saline group and 210 in the dextrose 5% in water group. Medication diluents accounted for 63% of the total IV volume over the observation period. In the saline group, 17.9% developed hyperchloremia compared with 10.5% in the dextrose 5% in water group (p = 0.037), which was statistically significant in multivariable analysis (odds ratio, 0.50; 95% CI, 0.26-0.94; p = 0.031). In the saline group, 34.2% developed acute kidney injury versus 24.5% in the dextrose 5% in water group (p = 0.035); however, this was not statistically significant when adjusting for baseline covariates. No other significant differences in dysnatremias, insulin requirements, glucose control, ICU length of stay, or ICU mortality were observed. This study identified that medication diluents contribute substantially to the total IV volume received by critically ill patients. Saline as the primary medication diluent compared with dextrose 5% in water is associated with hyperchloremia, a possible risk factor for acute kidney injury.

Liquefaction process wherein solvents derived from the material liquefied and containing increased concentrations of donor species are employed

DOEpatents

Fant, B. T.; Miller, John D.; Ryan, D. F.

1982-01-01

An improved process for the liquefaction of solid carbonaceous materials wherein a solvent or diluent derived from the solid carbonaceous material being liquefied is used to form a slurry of the solid carbonaceous material and wherein the solvent or diluent comprises from about 65 to about 85 wt. % hydroaromatic components. The solvent is prepared by first separating a solvent or diluent distillate fraction from the liquefaction product, subjecting this distillate fraction to hydrogenation and then extracting the naphthenic components from the hydrogenated product. The extracted naphthenic components are then dehydrogenated and hydrotreated to produce additional hydroaromatic components. These components are combined with the solvent or diluent distillate fraction. The solvent may also contain hydroaromatic constituents prepared by extracting naphthenic components from a heavy naphtha, dehydrogenating the same and then hydrotreating the dehydrogenated product. When the amount of solvent produced in this manner exceeds that required for steady state operation of the liquefaction process a portion of the solvent or diluent distillated fraction will be withdrawn as product.

Constant-Pressure Combustion Charts Including Effects of Diluent Addition

NASA Technical Reports Server (NTRS)

Turner, L Richard; Bogart, Donald

1949-01-01

Charts are presented for the calculation of (a) the final temperatures and the temperature changes involved in constant-pressure combustion processes of air and in products of combustion of air and hydrocarbon fuels, and (b) the quantity of hydrocarbon fuels required in order to attain a specified combustion temperature when water, alcohol, water-alcohol mixtures, liquid ammonia, liquid carbon dioxide, liquid nitrogen, liquid oxygen, or their mixtures are added to air as diluents or refrigerants. The ideal combustion process and combustion with incomplete heat release from the primary fuel and from combustible diluents are considered. The effect of preheating the mixture of air and diluents and the effect of an initial water-vapor content in the combustion air on the required fuel quantity are also included. The charts are applicable only to processes in which the final mixture is leaner than stoichiometric and at temperatures where dissociation is unimportant. A chart is also included to permit the calculation of the stoichiometric ratio of hydrocarbon fuel to air with diluent addition. The use of the charts is illustrated by numerical examples.

Studies on the compressibility of wax matrix granules of acetaminophen and their admixtures with various tableting bases.

PubMed

Uhumwangho, M U; Okor, R S

2006-04-01

Matrix granules of acetaminophen have been formed by a melt granulation process whereby the acetaminophen powder was triturated with the melted wax--goat wax, glyceryl monostearate or carnuba wax. The compressibility of the matrix granules and their admixture, with diluent granules (lactose, alpha-cellulose or microcrystalline cellulose) was investigated. The granules were compressed to tablets at a constant load (30 arbitrary units on the load scale) of a manesty single punch machine. Resulting tablets were evaluated for tensile strength (T) and disintegration times (DT). Granule flow was determined by measuring their angle of repose when allowed to fall freely on a level surface. Matrix granules prepared by melt granulation with goat wax or glyceryl monostearate were too sticky and therefore did not flow at all. They were also poorly compressible (T values = 0.20MN/m2). Inclusion of the diluent remarkably improved granule flow property and compressibility. The T values of the tablets (measure of compressibility) increased from about 0.24 to 0.65 MN/m2 during increase in diluent (lactose) content from 20 to 80 %w/w. Microcrystalline cellulose and alpha-cellulose were more effective than lactose in promoting compressibility of the granules. By contrast the matrix granules formed with carnuba wax were free flowing (angle of repose, 18.60). Addition of the diluent further improved flowability slightly. The matrix granules (without a diluent) were readily compressible (T value, 1.79MN/m2). Addition of the diluent (80%w/w) reduced T values (MN/m2) slightly to 1.32 (lactose), 1.48 (alpha-cellulose) and 1.74 (microcrystalline cellulose). Tablets of the matrix granules only, disintegrated rapidly within 3 minutes. DT was further reduced to <30 s by addition of any of the diluents. The indication is that the inclusion of the diluents studied can be used to improve the compressibility of the otherwise poorly compressible matrix granules. Based on the flowability, compressibility, and disintegration data, carnuba wax proved most promising in the melt granulation of the test drug for sustained release applications.

Rotor assembly and method for automatically processing liquids

DOEpatents

Burtis, Carl A.; Johnson, Wayne F.; Walker, William A.

1992-01-01

A rotor assembly for performing a relatively large number of processing steps upon a sample, such as a whole blood sample, and a diluent, such as water, includes a rotor body for rotation about an axis and including a network of chambers within which various processing steps are performed upon the sample and diluent and passageways through which the sample and diluent are transferred. A transfer mechanism is movable through the rotor body by the influence of a magnetic field generated adjacent the transfer mechanism and movable along the rotor body, and the assembly utilizes centrifugal force, a transfer of momentum and capillary action to perform any of a number of processing steps such as separation, aliquoting, transference, washing, reagent addition and mixing of the sample and diluent within the rotor body. The rotor body is particularly suitable for automatic immunoassay analyses.

Gene banking of the neotropical fish Leporinus obtusidens (Valenciennes, 1836): a protocol to freeze its sperm in the field.

PubMed

Taitson, P F; Chami, E; Godinho, H P

2008-05-01

A practical sperm cryopreservation protocol using a dry-shipper and a diluent of simple composition is described for the neotropical fish Leporinus obtusidens (Valenciennes, 1836). The cooling rate of the dry-shipper and its period of useful time, established under laboratory conditions, were respectively 25.7-30.8 degrees C/min (between 0 and -60 degrees C) and 9 days after charging. Sperm donors were selected on the basis of their hyperemic genital papilla and the ability to ooze milt under gentle manual pressure, during the reproductive months of November to January. Milt volume (1.3+/-0.3 mL; n=9 fish), fresh sperm motility rate (93.3+/-2.5%; n=6 fish), and sperm concentration (10.9+/-3.0 x 10(9)spermatozoa/mL of milt) were obtained. The sperm cryopreservation experiments were conducted with the following cryoprotectants (all at 10%, before mixing with milt): dimethyl sulphoxide (DMSO; n=10 fish), methanol (n=6 fish), propanediol (n=6 fish) and ethylene glycol (n=5 fish). Glucose (5%) and hen's egg yolk (10%) made up the diluents containing DMSO, ethylene glycol or propanediol. Milk powder (10%) replaced hen's egg yolk in the diluent containing methanol. Distilled water (up to 100%) completed the diluent solutions. Milt freezing (in 0.5-mL straws) was performed in the dry-shipper after 1:5 (milt:diluent) dilution. Thawed sperm cryopreserved in DMSO-containing diluent and activated by 119 mM NaHCO(3) gave the highest motility rate (62+/-14%). The fertilizing capacity of L. obtusidens sperm was tested using the combination of DMSO-containing diluent as the cryoprotectant and 119 mM NaHCO(3) as the activating solution. Oocytes were obtained from artificial spawning and fertilized with different proportions of spermatozoa. The greatest rate of fertilization (74%) occurred when the ratio of about 112,000 motile spermatozoa:oocyte was used. Thus, a protocol to freeze L. obtusidens sperm can be elaborated as follows. Milt (<1.5 mL fish(-1)) was readily available only in November to January; a simple solution, composed of 10% DMSO (concentration before adding milt), 5% glucose, and 10% hen yolk egg, in distilled water, was used as sperm diluent; cooling rate of 25-30 degrees C/min, yielded in a portable dry-shipper, was adequate to freeze diluted milt (1:5; milt:diluent), in 5-mL straws; about 112,000 thawed motile spermatozoa:oocyte activated by 119 mM NaHCO(3) assured a fertilization rate of 74%.

Prediction and validation of blowout limits of co-flowing jet diffusion flames -- effect of dilution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karbasi, M.; Wierzba, I.

1996-10-01

The blowout limits of a co-flowing turbulent methane jet diffusion flame with addition of diluent in either jet fuel or surrounding air stream is studied both analytically and experimentally. Helium, nitrogen and carbon dioxide were employed as the diluents. Experiments indicated that an addition of diluents to the jet fuel or surrounding air stream decreased the stability limit of the jet diffusion flames. The strongest effect was observed with carbon dioxide as the diluent followed by nitrogen and then by helium. A model of extinction based on recognized criterion of the mixing time scale to characteristic combustion time scale ratiomore » using experimentally derived correlations is proposed. It is capable of predicting the large reduction of the jet blowout velocity due to a relatively small increase in the co-flow stream velocity along with an increase in the concentration of diluent in either the jet fuel or surrounding air stream. Experiments were carried out to validate the model. The predicted blowout velocities of turbulent jet diffusion flames obtained using this model are in good agreement with the corresponding experimental data.« less

The test about blood serum capabilities in maintaining the quality of bull spermatozoa during storage in cep diluent at refrigerator temperature

NASA Astrophysics Data System (ADS)

Ducha, Nur

2018-03-01

The storage of spermatozoa requires a protective material from cold shock events and the presence of free radicals.In CEP diluent contain BSA, that was used as spermatozoa protection. This study aim was to examine the ability of cow blood serum in replacing BSA as spermatozoa protective in CEP diluent. Fresh semen from Limousin bull was diluted with CEP diluent + BSA as control, in the treatment group were CEP without BSA, but replaced with 3%, 5%, and 7% serum from fresh blood. Spermatozoa quality tests included motility and viability. The motility of spermatozoa was observed by two people using a light microscope with 200 X magnification at temperature of 37°C. The method of viability observation was eosin nigrosin staining, and observed under a light microscope with 400 X magnification. The results showed that the replacement of cow blood serum with various concentrations gave different effects on the quality of spermatozoa. The best motility and viability of the treatment group was at serum concentrations of 5% after eight days storage and was not significantly different from the controls. The conclusion in this study was cow blood serum can replace BSA in CEP diluents.

Derivation of a reference dose for a complex petroleum hydrocarbon mixture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryer-Powder, J.E.; LaPirre, A.; Scofield, R.

1997-12-31

Petroleum hydrocarbon mixtures pose a challenge in assessing potential health effects associated with environmental exposures through impacted media. Two components of risk assessment that must be addressed when evaluating these mixtures are toxicity and environmental fate. In this paper, we focus on issues regarding toxicity. Specifically, we have developed a methodology to derive a reference dose (RfD) for a complex petroleum hydrocarbon mixture referred to as diluent. Diluent is a solvent used in the production of crude oil and is composed of hydrocarbons in the middle distillate range. Two conservative approaches to developing a reference dose for diluent are presented.more » Both involve separating the diluent into carbon number ranges (e.g., diluent consists of hydrocarbons containing between 5 carbons and greater than 21 carbons, so, the mixture can be divided into mixtures of hydrocarbons having 5 carbons, 6-11 carbons, etcetera) and assigning each range a representative RfD. In the first approach, the representative RfD for each range is that of one specific chemical within the range (e.g., the reference dose for the C{sub 5}-C{sub 8} carbon range is that of n-hexane). In the second approach, the RfD dose for each range is that of a mixture of chemicals representative of each carbon number range (e.g., the RfD for the C{sub 6} to C{sub 11} carbon range is that of mineral spirits). The RfD for each carbon range is then multiplied by the percent of diluent in the corresponding range and the products are added to arrive at a final RfD. The RfD for diluent using the first approach is estimated at 2 mg/kg-day and that using the second approach is estimated at 1 mg/kg-day.« less

Rotor assembly and method for automatically processing liquids

DOEpatents

Burtis, C.A.; Johnson, W.F.; Walker, W.A.

1992-12-22

A rotor assembly is described for performing a relatively large number of processing steps upon a sample, such as a whole blood sample, and a diluent, such as water. It includes a rotor body for rotation about an axis and includes a network of chambers within which various processing steps are performed upon the sample and diluent and passageways through which the sample and diluent are transferred. A transfer mechanism is movable through the rotor body by the influence of a magnetic field generated adjacent the transfer mechanism and movable along the rotor body, and the assembly utilizes centrifugal force, a transfer of momentum and capillary action to perform any of a number of processing steps such as separation, aliquoting, transference, washing, reagent addition and mixing of the sample and diluent within the rotor body. The rotor body is particularly suitable for automatic immunoassay analyses. 34 figs.

Effect of Diluent on Ultra-low Temperature Curable Conductive Silver Adhesive

NASA Astrophysics Data System (ADS)

Zhou, Xingli; Wang, Likun; Liao, Qingwei; Yan, Chao; Du, Haibo; Qin, Lei

2018-03-01

The ultra-low temperature curable conductive silver adhesive needed urgently for the surface conductive treatment of piezoelectric composite material. The effect of diluent acetone on ultra-low temperature curable conductive silver adhesive were investigated for surface conductive treatment of piezoelectric composite material. In order to improve the operability and extend the life of the conductive adhesive, the diluent was added to dissolve and disperse conductive adhesive. With the increase of the content of diluent, the volume resistivity of conductive adhesive decreased at first and then increased, and the shear strength increased at first and then decreased. When the acetone content is 10%, the silver flaky bonded together, arranged the neatest, the smallest gap, the most closely connected, the surface can form a complete conductive network, and the volume resistivity is 2.37 × 10-4Ω · cm, the shear strength is 5.13MPa.

Influence of diluent and sample processing methods on the recovery of the biocontrol agent Pantoea agglomerans CPA-2 from different fruit surfaces.

PubMed

Torres, R; Viñas, I; Usall, J; Remón, D; Teixidó, N

2012-08-01

Determining the populations of biocontrol agents applied as a postharvest treatment on fruit surfaces is fundamental to the assessment of the microorganisms' ability to colonise and persist on fruit. To obtain maximum recovery, we must develop a methodology that involves both diluent and processing methods and that does not affect the viability of the microorganisms. The effect of diluent composition was evaluated using three diluents: phosphate buffer, peptone saline and buffered peptone saline. An additional study was performed to compare three processing methods (shaking plus sonication, stomaching and shaking plus centrifugation) on the recovery efficiency of Pantoea agglomerans strain CPA-2 from apples, oranges, nectarines and peaches treated with this biocontrol agent. Overall, slight differences occurred among diluents, although the phosphate buffer maintained the most ideal pH for CPA-2 growth (between 5.2 and 6.2). Stomaching, using the phosphate buffer as diluent, was the best procedure for recovering and enumerating the biocontrol agent; this fact suggested that no lethal effects from naturally occurring antimicrobial compounds present on the fruit skins and/or produced when the tissues were disrupted affected the recovery of the CPA-2 cells, regardless of fruit type. The growth pattern of CPA-2 on fruits maintained at 20°C and under cold conditions was similar to that obtained in previous studies, which confirms the excellent adaptation of this strain to conditions commonly used for fruit storage. Copyright © 2012 Elsevier B.V. All rights reserved.

Diluent choice for subcutaneous infusion: a survey of the literature and Australian practice.

PubMed

Flowers, Charne; McLeod, Fiona

2005-02-01

Continuous subcutaneous infusion is a method frequently used in palliative care to manage patient symptoms. To deliver the dose required and prevent subcutaneous sites from becoming inflamed and painful, the drug is often diluted in a solution, most commonly sterile water for injection or sodium chloride. The use of sterile water for injection has been recommended for cyclizine yet beyond this example there appears to be limited clinical direction regarding diluent selection. Inconsistency or lack of guidelines can be problematic if a diluent that may enhance the effectiveness of a drug compared with an alternate is not used because of lack of knowledge or guidance. This investigation considered existing literature, drug databases and directories, and involved a survey of palliative care services to examine evidence and experience relating to diluent selection. A number of inconsistencies emerged in both the literature and practice. With the exception of five drugs for which only saline was recommended, there appeared to be an inclination to use water unless contraindicated. Given an increasing reliance on this method of symptom management, the absence of formal clinical evidence or recommendations and ambiguity in relation to the use of diluents highlights the need for these deficits to be addressed as quickly as possible.

Effect of cryoprotective diluent and method of freeze-thawing on survival and acrosomal integrity of ram spermatozoa.

PubMed

Pontbriand, D; Howard, J G; Schiewe, M C; Stuart, L D; Wildt, D E

1989-08-01

A multifactorial study analyzed the effects of freezing method, cryoprotective diluent, semen to diluent ratio, and thawing velocity on post-thaw motility, progressive status, and acrosomal integrity of ram spermatozoa. Although semen to diluent ratio (1:3 vs 1:6, v/v) had no effect (P greater than 0.05), overall post-thaw spermatozoal viability was highly dependent on freezing method and cryoprotectant. Improved results were obtained by freezing semen in 0.5-ml French straws compared to dry ice pelleting. Manually freezing straws 5 cm above liquid nitrogen (LN2) was comparable to cooling straws in an automated, programmable LN2 unit. Of the two cryoprotective diluents tested, BF5F (containing the surfactant component sodium and triethanolamine lauryl sulfate) yielded approximately 50% fewer (P less than 0.05) spermatozoa with loose acrosomal caps compared to TEST. Thawing straws in a water bath at a higher velocity (60 degrees C for 8 sec) had no effect (P greater than 0.05) on spermatozoal motility, progressive status ratings, or acrosomal integrity when compared to a lower rate (37 degrees C for 20 sec). For the TEST group, thawing pellets in a dry, glass culture tube promoted (P less than 0.05) percentage sperm motility at 3 and 6 hr post-thawing, but for BF5F diluted semen this approach decreased the % of spermatozoa with normal apical ridges. The results suggest that the poor fertility rates often experienced using thawed ram semen likely result not only from reduced sperm motility, but also from compromised ultrastructural integrity. This damage is expressed by an increased loosening of the acrosomal cap, a factor which appears insensitive to freezing method but markedly influenced by the cryoprotective properties of the diluents tested.

Use of ionic liquids as headspace gas chromatography diluents for the analysis of residual solvents in pharmaceuticals.

PubMed

Nacham, Omprakash; Ho, Tien D; Anderson, Jared L; Webster, Gregory K

2017-10-25

In this study, two ionic liquids (ILs), 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([BMIM][NTf 2 ]) and trihexyltetradecylphosphonium bis[(trifluoromethyl)sulfonyl]imide ([P 66614 ][NTf 2 ]) were examined as contemporary diluents for residual solvent analysis using static headspace gas chromatography (SHS-GC) coupled with flame ionization detection (FID). ILs are a class of non-molecular solvents featuring negligible vapor pressure and high thermal stabilities. Owing to these favorable properties, ILs have potential to enable superior sensitivity and reduced interference, compared to conventional organic diluents, at high headspace incubation temperatures. By employing the [BMIM][NTf 2 ] IL as a diluent, a 25-fold improvement in limit of detection (LOD) was observed with respect to traditional HS-GC diluents, such as N-methylpyrrolidone (NMP). The established IL-based method demonstrated LODs ranging from 5.8 parts-per-million (ppm) to 20ppm of residual solvents in drug substances. The optimization of headspace extraction conditions was performed prior to method validation. An incubation temperature of 140°C and a 15min incubation time provided the best sensitivity for the analysis. Under optimized experimental conditions, the mass of residual solvents partitioned in the headspace was higher when using [BMIM][NTf 2 ] than NMP as a diluent. The analytical performance was demonstrated by determining the repeatability, accuracy, and linearity of the method. Linear ranges of up to two orders of magnitude were obtained for class 3 solvents. Excellent analyte recoveries were obtained in the presence of three different active pharmaceutical ingredients. Owing to its robustness, high throughput, and superior sensitivity, the HS-GC IL-based method can be used as an alternative to existing residual solvent methods. Copyright © 2017 Elsevier B.V. All rights reserved.

21 CFR 73.2329 - Guanine.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2329 Guanine. (a) Identity and specifications. (1) The... coloring cosmetics generally, only those diluents listed under § 73.1001(a)(1); (ii) For coloring externally applied cosmetics, only those diluents listed in § 73.1001(b) and, in addition, nitrocellulose. (b...

21 CFR 73.2329 - Guanine.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2329 Guanine. (a) Identity and specifications. (1) The... coloring cosmetics generally, only those diluents listed under § 73.1001(a)(1); (ii) For coloring externally applied cosmetics, only those diluents listed in § 73.1001(b) and, in addition, nitrocellulose. (b...

21 CFR 73.2329 - Guanine.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2329 Guanine. (a) Identity and specifications. (1) The... coloring cosmetics generally, only those diluents listed under § 73.1001(a)(1); (ii) For coloring externally applied cosmetics, only those diluents listed in § 73.1001(b) and, in addition, nitrocellulose. (b...

Study of the Tributyl Phosphate--30 Percent Dodecane Solvent; ETUDE DU SOLVANT PHOSPHATE TRIBUTYLIQUE 30 PERCENT--DODECANE (in French)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leroy, P.

1967-07-01

This study, originating mainly from a literature survey, gives the principal chemical and physical features of the tributyl-phosphate (TBP) agent diluted at 30 volumes per cent in dodecane. The mixture is a very commonly used extractant in nuclear fuel processing. In this paper, the main following points are reported: -) the components (TBP and diluents) -) the TBP-diluents systems (non-loaded), -) the TBP-diluents-water systems, -) TBP-diluents-water-nitric acid systems, and -) industrial solvents. (author) [French] Cette etude, d'origine bibliographique, regroupe les caracteristiques physico-chimiques essentielles du phosphate tributylique (TBP) dilue a 30% en volume dans du dodecane. Ce melange constitue un agentmore » d'extraction tres utilise dans le traitement des combustibles nucleaires. Les principaux points traites sont les suivants: -) les constituants (TBP et diluants), -) les systemes TBP-diluants non charges, -) les systemes TBP-diluants-eau, -) les systemes TBP-diluants-eau-acide nitrique, et -) les solvants industriels. (auteur)« less

Contact allergy to an epoxy reactive diluent: 1,4-butanediol diglycidyl ether.

PubMed

Jolanki, R; Estlander, T; Kanerva, L

1987-02-01

3 female workers in a brush factory developed contact allergy from a 2-component epoxy glue containing epoxy resin (37% w/w), reactive diluents: i.e., 1,4-butanediol diglycidyl ether (BDDGE) 3%, glycidyl ethers of aliphatic alcohols (Epoxide 8) 0.03% and phenyl glycidyl ether (PGE) 0.01%; and inert fillers. All 3 patients were positive to the resin component of the glue and to BDDGE, indicating that BDDGE was the main allergen. 2 of the patients reacted to PGE, but none to the 3rd reactive diluent (Epoxide 8) in the glue. 2 of the patients did not react to epoxy resin, indicating that BDDGE may be an even stronger sensitizer in humans than epoxy resin, and that it does not cross-react with epoxy resins. Permeation studies revealed that BDDGE penetrates disposable PVC and rubber gloves in less than 30 min; thus, contaminated gloves should be replaced immediately. Reactive diluents should be included in patch test series if contact allergy to epoxy products is suspected.

Electrochemical Detection of Platinum(IV) Prodrug Satraplatin in Serum.

PubMed

Wu, Yao; Lai, Rebecca Y

2015-11-03

We report the design and fabrication of a reagentless and reusable electrochemical sensor for detection of satraplatin (SAT), a platinum(IV) prodrug. The detection strategy is based on the electrocatalytic reaction between the Pt(IV) center of SAT and surface-immobilized methylene blue. We systematically evaluated the effect of passivating diluent chain length on the overall sensor performance. Our results show that the use of a shorter diluent like 2-mercaptoethanol is more advantageous than using a longer and more passivating diluent such as 6-mercapto-1-hexanol. Independent of the use of cyclic voltammetry or chronoamperometry as the sensor interrogation technique, all three sensors, each passivated with a different alkanethiol diluent, have been demonstrated to be sensitive; the limit of detection is in the range of 1-10 μM. They are also highly specific and do not respond to Pt(II) drugs such as cisplatin and carboplatin. More importantly, they are selective enough to be employed directly in 50% serum. This sensing strategy has potential applications in clinical pharmacokinetics studies.

Design and UV-curable behaviour of boron based reactive diluent for epoxy acrylate oligomer used for flame retardant wood coating

PubMed Central

Chambhare, Sachin U.; Lokhande, Gunawant P.; Jagtap, Ramanand N.

2017-01-01

Abstract Difunctional boron-containing reactive flame retardant for UV-curable epoxy acrylate oligomer was synthesized from phenyl boronic acid and glycidyl methacrylate. The synthesized reactive diluent was utilized to formulate ultraviolet (UV)-curable wood coatings. The weight fractions of reactive diluent in coatings formulation was varied from 5 to 25 wt % with constant photoinitiator concentration. The molecular structure of reactive flame retardant was confirmed by Fourier-transform infrared, Nuclear magnetic resonance (NMR) and 11B NMR spectral analysis. Further, the efficacy of flame retardant behaviour of coatings was evaluated using limiting oxygen index and UL-94 vertical burning test. Thermal stability of cured coatings films were estimated from thermogravimetric and differential scanning calorimetry analysis. The effects of varying concentration of reactive diluent on the viscosity of coatings formulation along with optical, mechanical and chemical resistance properties of coatings were also evaluated. The coatings gel content, water absorption behaviour, contact angle analysis and stain resistance were also studied. PMID:29491786

THE FREEZING POINT DEPRESSION OF MAMMALIAN TISSUES IN RELATION TO THE QUESTION OF OSMOTIC ACTIVITY OF CELL FLUID

PubMed Central

Brodsky, William A.; Appelboom, Johannes W.; Dennis, Warren H.; Rehm, Warren S.; Miley, John F.; Diamond, Israel

1956-01-01

The freezing point depression of freshly excised frozen tissues, pulverized in a hydraulic press or in a mortar, is greater than that of plasma. Even at 0°C. the freezing point depression of such homogenates increases significantly with time. Dilution data indicate that such freezing point data are valid. The presence of intact cells has been shown in smears of tissues pulverized in a mortar, but not in smears of those crushed in a hydraulic press. The osmolarity of various diluent solutions affects the calculated osmotic activity of tissue homogenates presumably because of delayed diffusion between the diluent and cell fluid. With a hypertonic NaCl diluent, spuriously low values of tissue osmotic activity are found from calculations assuming instantaneous mixing between homogenates and diluents. The limitations of data from cryoscopic experiments and from tissue-swelling experiments are discussed in relation to the basic question of whether or not cell fluid is isotonic to extracellular fluid. PMID:13385447

The immediate impact of semen diluent and rate of dilution on the sperm quality index, ATP utilization, gas exchange, and ionic balance of broiler breeder sperm.

PubMed

Parker, H M; McDaniel, C D

2006-01-01

The sperm quality index (SQI) is a tool used to predict overall rooster semen quality, fertility, and hatchability. However, semen must be diluted before SQI analysis, and research has shown that the SQI is most predictive of fertility at lower semen dilutions. Therefore, the present study was undertaken to determine why the SQI is not as predictive of fertility at higher semen dilutions and whether semen diluent type alters the SQI, adenosine triphosphate (ATP) utilization, gas exchange, and ionic balance of broiler breeder sperm. Semen was diluted with saline, seminal plasma, or minimum essential medium (MEM) from 2- to 200-fold. The following parameters were measured for each diluent type at each dilution: SQI, ATP, Na+, Ca2+, K+, Cl-, CO2, and O2. To examine the rate of sperm motility, the SQI was expressed as SQI/million sperm per mL (SQI/sperm). There was an interaction between diluent type and dilution for the SQI, SQI/sperm, CO2 generated, O2 used, as well as Na+, Ca2+, and K+ internalization. For sperm diluted with saline, the SQI declined more rapidly with increasing dilution. However, SQI/sperm increased rapidly when semen was diluted with MEM or SP. Sperm diluted in SP used ATP with increasing dilution whereas sperm diluted with saline and MEM generated ATP. Neat semen contained no free O2; however, each diluent type contained abundant O2 resulting in more O2 available as semen was diluted. Sperm diluted in SP produced more CO2 and used more O2 than semen diluted in saline or MEM. For SQI/sperm, ATP and CO2 generated, as well as Na+ and Ca2+ internalization, differences between diluent types occurred when semen was diluted 50-fold and greater. In conclusion, it appears that sperm motility, ATP utilization, gas exchange, and ionic balance are altered by diluent type and rate of dilution. These alterations in semen quality are exacerbated at semen dilutions of 50-fold and greater yielding an SQI that is not indicative of sperm motility or fertility.

New methods and media for the centrifugation of honey bee (Hymenoptera: Apidae) drone semen.

PubMed

Wegener, Jakob; May, Tanja; Kamp, Günter; Bienefeld, Kaspar

2014-02-01

Centrifugation of Apis mellifera L. drone semen is a necessary step in the homogenization of semen pools for the enlargement of the effective breeding population, as well as in the collection of semen by the so-called washing technique. It is also of interest for the removal of cryoprotectants after cryopreservation. The adoption of methods involving semen centrifugation has been hampered by their damaging effect to sperm. Here, we tested four new diluents as well as three additives (catalase, hen egg yolk, and a protease inhibitor), using sperm motility and dual fluorescent staining as indicators of semen quality. Three of the new diluents significantly reduced motility losses after centrifugation, as compared with the literature standard. Values of motility and propidium iodide negativity obtained with two of these diluents were not different from those measured with untreated semen. The least damaging diluent, a citrate-HEPES buffer containing trehalose, was then tested in an insemination experiment with centrifuged semen. Most queens receiving this semen produced normal brood, and the number of sperm reaching the storage organ of the queen was not significantly different from that in queens receiving untreated semen. These results could improve the acceptance of techniques involving the centrifugation of drone semen. The diluent used in the insemination experiment could also serve as semen extender for applications not involving centrifugation.

40 CFR 92.112 - Analytical gases.

Code of Federal Regulations, 2010 CFR

2010-07-01

... hydrocarbons plus impurities or by dynamic blending. Nitrogen shall be the predominant diluent with the balance... grade nitrogen as the diluent. (b) Gases for the hydrocarbon analyzer shall be single blends of propane... with a maximum NO2 concentration of 5 percent of the nominal value using zero grade nitrogen as the...

40 CFR 92.112 - Analytical gases.

Code of Federal Regulations, 2013 CFR

2013-07-01

... hydrocarbons plus impurities or by dynamic blending. Nitrogen shall be the predominant diluent with the balance... grade nitrogen as the diluent. (b) Gases for the hydrocarbon analyzer shall be single blends of propane... with a maximum NO2 concentration of 5 percent of the nominal value using zero grade nitrogen as the...

40 CFR 92.112 - Analytical gases.

Code of Federal Regulations, 2012 CFR

2012-07-01

... hydrocarbons plus impurities or by dynamic blending. Nitrogen shall be the predominant diluent with the balance... grade nitrogen as the diluent. (b) Gases for the hydrocarbon analyzer shall be single blends of propane... with a maximum NO2 concentration of 5 percent of the nominal value using zero grade nitrogen as the...

40 CFR 92.112 - Analytical gases.

Code of Federal Regulations, 2011 CFR

2011-07-01

... hydrocarbons plus impurities or by dynamic blending. Nitrogen shall be the predominant diluent with the balance... grade nitrogen as the diluent. (b) Gases for the hydrocarbon analyzer shall be single blends of propane... with a maximum NO2 concentration of 5 percent of the nominal value using zero grade nitrogen as the...

40 CFR 92.112 - Analytical gases.

Code of Federal Regulations, 2014 CFR

2014-07-01

... dynamic blending. Nitrogen shall be the predominant diluent with the balance being oxygen. Oxygen... the CO and CO2 analyzers shall be single blends of CO and CO2, respectively, using zero grade nitrogen... maximum NO2 concentration of 5 percent of the nominal value using zero grade nitrogen as the diluent. (e...

21 CFR 73.2162 - Bismuth oxychloride.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Bismuth oxychloride. 73.2162 Section 73.2162 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF... following diluents: (i) For coloring cosmetics generally, only those diluents listed under § 73.1001(a)(1...

9 CFR 381.461 - Nutrient content claims for the sodium content.

Code of Federal Regulations, 2010 CFR

2010-01-01

... dehydrated products that must be reconstituted before typical consumption with water or a diluent containing... before typical consumption with water or a diluent containing an insignificant amount, as defined in... of sodium;” and (iii) If the product meets these conditions without the benefit of special processing...

9 CFR 317.361 - Nutrient content claims for the sodium content.

Code of Federal Regulations, 2010 CFR

2010-01-01

... dehydrated products that must be reconstituted before typical consumption with water or a diluent containing... before typical consumption with water or a diluent containing an insignificant amount, as defined in... insignificant amount of sodium”; and (iii) If the product meets these conditions without the benefit of special...

9 CFR 113.35 - Detection of viricidal activity.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS STANDARD... used as diluent for a desiccated live virus vaccine in a combination package. (a) Bulk or final... with each virus fraction for which it is to be used as a diluent. If the vaccine to be rehydrated...

77 FR 21763 - Explorer Pipeline Company; Notice of Petition for Declaratory Order

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-11

... pipeline extension project (Diluent Extension Project). The Diluent Extension Project involves the... Rule 207(a)(2) of the Commission's Rules of Practice and Procedure, 18 CFR 385.207(a)(2)(2011), Explorer Pipeline Company (Explorer) petitioned the Federal Energy Regulatory Commission for a declaratory...

9 CFR 113.54 - Sterile diluent.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Sterile diluent. 113.54 Section 113.54 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES... acceptable outline on file with Animal and Plant Health Inspection Service. (b) Each quantity prepared at one...

Watermelon juice: A promising feedstock supplement, diluent, and nitrogen supplement for ethanol biofuel production

USDA-ARS?s Scientific Manuscript database

Processing of watermelons to produce the neutraceuticals lycopene and citrulline yields a waste stream of watermelon juice at the rate of over 500 L/Mt of watermelons. Since watermelon juice contains 7-10% readily fermentable sugars, its potential as feedstock, diluent, and nitrogen supplement was ...

Occupational dermatoses from exposure to epoxy resin compounds in a ski factory.

PubMed

Jolanki, R; Tarvainen, K; Tatar, T; Estlander, T; Henriks-Eckerman, M L; Mustakallio, K K; Kanerva, L

1996-06-01

Of 22 workers in a ski factory, occupational allergic contact dermatitis was found in 8. 6 were sensitive to epoxy resin compounds, i.e., epoxy resins, hardeners or diluents, 1 to cobalt in glass-fiber reinforcements, and 1 to formaldehyde in a urea-formaldehyde glue and a lacquer. 4 workers had irritant contact dermatitis from epoxy resin compounds, lacquers, sanding dust, or glass-fiber dust. 3 had contact allergy from a new sensitizer, diethyleneglycol diglycidyl ether, in a reactive diluent. Immediate transfer of workers sensitized to epoxy resin from epoxy exposure prevents aggravation of their dermatitis and broadening of the sensitization to epoxy hardeners, diluents and other compounds.

21 CFR 101.61 - Nutrient content claims for the sodium content of foods.

Code of Federal Regulations, 2013 CFR

2013-04-01

... consumption with water or a diluent containing an insignificant amount, as defined in § 101.9(f)(1), of all... (for dehydrated foods that must be reconstituted before typical consumption with water or a diluent... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION FOOD LABELING Specific Requirements for Nutrient Content...

21 CFR 101.61 - Nutrient content claims for the sodium content of foods.

Code of Federal Regulations, 2011 CFR

2011-04-01

... consumption with water or a diluent containing an insignificant amount, as defined in § 101.9(f)(1), of all... (for dehydrated foods that must be reconstituted before typical consumption with water or a diluent... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION FOOD LABELING Specific Requirements for Nutrient Content...

21 CFR 101.61 - Nutrient content claims for the sodium content of foods.

Code of Federal Regulations, 2012 CFR

2012-04-01

... consumption with water or a diluent containing an insignificant amount, as defined in § 101.9(f)(1), of all... (for dehydrated foods that must be reconstituted before typical consumption with water or a diluent... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION FOOD LABELING Specific Requirements for Nutrient Content...

21 CFR 101.61 - Nutrient content claims for the sodium content of foods.

Code of Federal Regulations, 2014 CFR

2014-04-01

... consumption with water or a diluent containing an insignificant amount, as defined in § 101.9(f)(1), of all... (for dehydrated foods that must be reconstituted before typical consumption with water or a diluent... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION FOOD LABELING Specific Requirements for Nutrient Content...

21 CFR 101.61 - Nutrient content claims for the sodium content of foods.

Code of Federal Regulations, 2010 CFR

2010-04-01

... consumption with water or a diluent containing an insignificant amount, as defined in § 101.9(f)(1), of all... (for dehydrated foods that must be reconstituted before typical consumption with water or a diluent... SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION FOOD LABELING Specific Requirements for Nutrient Content...

Analysis of the effect of diluent for rehydration of PoulVac MycoF on vaccination seroconversion results

USDA-ARS?s Scientific Manuscript database

Direct eye drop vaccination of poultry using live Mycoplasma gallisepticum vaccines provides the most efficient route of vaccination. The research reported in this study examines the effect of diluent used to rehydrate lyophilized M. gallisepticum vaccines on its ability to induce a measurable humo...

Desensitization of metastable intermolecular composites

DOEpatents

Busse, James R [South Fork, CO; Dye, Robert C [Los Alamos, NM; Foley, Timothy J [Los Alamos, NM; Higa, Kelvin T [Ridgecrest, CA; Jorgensen, Betty S [Jemez Springs, NM; Sanders, Victor E [White Rock, NM; Son, Steven F [Los Alamos, NM

2011-04-26

A method to substantially desensitize a metastable intermolecular composite material to electrostatic discharge and friction comprising mixing the composite material with an organic diluent and removing enough organic diluent from the mixture to form a mixture with a substantially putty-like consistency, as well as a concomitant method of recovering the metastable intermolecular composite material.

Desensitization and recovery of metastable intermolecular composites

DOEpatents

Busse, James R [South Fork, CO; Dye, Robert C [Los Alamos, NM; Foley, Timothy J [Los Alamos, NM; Higa, Kelvin T [Ridgecrest, CA; Jorgensen, Betty S [Jemez Springs, NM; Sanders, Victor E [White Rock, NM; Son, Steven F [Los Alamos, NM

2010-09-07

A method to substantially desensitize a metastable intermolecular composite material to electrostatic discharge and friction comprising mixing the composite material with an organic diluent and removing enough organic diluent from the mixture to form a mixture with a substantially putty-like consistency, as well as a concomitant method of recovering the metastable intermolecular composite material.

21 CFR 520.1696a - Buffered penicillin powder, penicillin powder with buffered aqueous diluent.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Buffered penicillin powder, penicillin powder with... FORM NEW ANIMAL DRUGS § 520.1696a Buffered penicillin powder, penicillin powder with buffered aqueous diluent. (a) Specifications. When reconstituted, each milliliter contains penicillin G procaine equivalent...

21 CFR 520.1696a - Buffered penicillin powder, penicillin powder with buffered aqueous diluent.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Buffered penicillin powder, penicillin powder with... FORM NEW ANIMAL DRUGS § 520.1696a Buffered penicillin powder, penicillin powder with buffered aqueous diluent. (a) Specifications. When reconstituted, each milliliter contains penicillin G procaine equivalent...

21 CFR 520.1696a - Buffered penicillin powder, penicillin powder with buffered aqueous diluent.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Buffered penicillin powder, penicillin powder with... FORM NEW ANIMAL DRUGS § 520.1696a Buffered penicillin powder, penicillin powder with buffered aqueous diluent. (a) Specifications. When reconstituted, each milliliter contains penicillin G procaine equivalent...

A simple and inexpensive image analysis technique to study the effect of disintegrants concentration and diluents type on disintegration.

PubMed

Berardi, Alberto; Bisharat, Lorina; Blaibleh, Anaheed; Pavoni, Lucia; Cespi, Marco

2018-06-20

Tablets disintegration is often the result of a size expansion of the tablets. In this study, we quantified the extent and direction of size expansion of tablets during disintegration, using readily available techniques, i.e. a digital camera and a public domain image analysis software. After validating the method, the influence of disintegrants concentration and diluents type on kinetics and mechanisms of disintegration were studied. Tablets containing diluent, disintegrant (sodium starch glycolate-SSG, crospovidone-PVPP or croscarmellose sodium-CCS) and lubricant were prepared by direct compression. Projected area and aspect ratio of the tablets were monitored using image analysis techniques. The developed method could describe the kinetics and mechanisms of disintegration qualitatively and quantitatively. SSG and PVPP acted purely by swelling and shape recovery mechanisms. Instead, CCS worked by a combination of both mechanisms, the extent of which changed depending on its concentration and the diluent type. We anticipate that the method described here could provide a framework for the routine screening of tablets disintegration using readily available equipment. Copyright © 2018. Published by Elsevier Inc.

Sensitization to reactive diluents and hardeners in epoxy resin systems. IVDK data 2002-2011. Part I: reaction frequencies.

PubMed

Geier, Johannes; Lessmann, Holger; Hillen, Uwe; Skudlik, Christoph; Jappe, Uta

2016-02-01

Epoxy resin systems (ERSs), consisting of resins, reactive diluents, and hardeners, are indispensable in many branches of industry. In order to develop less sensitizing ERS formulations, knowledge of the sensitizing properties of single components is mandatory. To analyse the frequency of sensitization in the patients concerned, as one integral part of a research project on the sensitizing potency of epoxy resin compounds (FP-0324). A retrospective analysis of data from the Information Network of Departments of Dermatology (IVDK), 2002-2011, and a comparison of reaction frequencies with (surrogate) exposure data, were performed. Almost half of the patients sensitized to epoxy resin were additionally sensitized to reactive diluents or hardeners. Among the reactive diluents, 1,6-hexanediol diglycidyl ether was the most frequent allergen, followed by 1,4-butanediol diglycidyl ether, phenyl glycidyl ether, and p-tert-butylphenyl glycidyl ether. Among the hardeners, m-xylylene diamine (MXDA) and isophorone diamine (IPDA) were the most frequent allergens. According to the calculated exposure-related frequency of sensitization, MXDA seems to be a far more important sensitizer than IPDA. Up to 60% of the patients sensitized to hardeners and 15-20% of those sensitized to reactive diluents do not react to epoxy resin. In cases of suspected contact allergy to an ERS, a complete epoxy resin series must be patch tested from the start. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Lignin model compounds as bio-based reactive diluents for liquid molding resins.

PubMed

Stanzione, Joseph F; Sadler, Joshua M; La Scala, John J; Wool, Richard P

2012-07-01

Lignin is a copious paper and pulping waste product that has the potential to yield valuable, low molecular weight, single aromatic chemicals when strategically depolymerized. The single aromatic lignin model compounds, vanillin, guaiacol, and eugenol, were methacrylated by esterification with methacrylic anhydride and a catalytic amount of 4-dimethylaminopyridine. Methacrylated guaiacol (MG) and methacrylated eugenol (ME) exhibited low viscosities at room temperature (MG: 17 cP and ME: 28 cP). When used as reactive diluents in vinyl ester resins, they produced resin viscosities higher than that of vinyl ester-styrene blends. The relative volatilities of MG (1.05 wt% loss in 18 h) and ME (0.96 wt% loss in 18 h) measured by means of thermogravimetric analysis (TGA) were considerably lower than that of styrene (93.7 wt% loss in 3 h) indicating the potential of these chemicals to be environmentally friendly reactive diluents. Bulk polymerization of MG and ME generated homopolymers with glass transition temperatures (T(g)s) of 92 and 103 °C, respectively. Blends of a standard vinyl ester resin with MG and ME (50 wt % reactive diluent) produced thermosets with T(g)s of 127 and 153 °C, respectively, which are comparable to vinyl ester-styrene resins, thus demonstrating the ability of MG and ME to completely replace styrene as reactive diluents in liquid molding resins without sacrificing cured-resin thermal performance. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The effect of antioxidants on ozone-induced airway hyperresponsiveness in dogs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsui, S.; Jones, G.L.; Woolley, M.J.

1991-12-01

The role of oxygen radicals in causing ozone-induced airway hyperresponsiveness in dogs was examined by pretreating dogs with allopurinol and/or deferoxamine mesylate (desferal), which are inhibitors of oxygen radical generation, before ozone inhalation. Acetylcholine airway responsiveness was measured before and after either air or ozone inhalation (3 ppm for 20 min) on 5 experimental days separated by at least 2 wk. On each day, the dogs were pretreated intravenously with allopurinol (50 mg/kg) followed by inhaled desferal (1,000 mg inhalation) or with allopurinol followed by the diluent for desferal or with the diluent for allopurinol and desferal or with bothmore » diluents. The effect of ozone on acetylcholine airway responsiveness was expressed as the differences in the log-transformed preozone-postozone acetylcholine provocative concentrations. When dogs received both diluents or either treatment alone, ozone inhalation caused airway hyperresponsiveness. The mean log differences for the preozone-postozone acetylcholine provocative concentration were 0.804 (SEM, 0.17) for both diluents, 0.524 (SEM, 0.16) for allopurinol alone, and 0.407 (SEM, 0.22) for desferal alone. However, the combination of allopurinol and desferal significantly inhibited the development of ozone-induced airway hyperresponsiveness, the log difference being 0.195 (SEM, 0.11) (p less than 0.05), without inhibiting ozone-induced neutrophil influx into the airways. The results suggest that the production of oxygen radicals is important in the pathogenesis of ozone-induced airway hyperresponsiveness.« less

Control of Polymer Glass Formation Behaviour Using Molecular Diluents and Dynamic Interfaces

NASA Astrophysics Data System (ADS)

Mangalara, Jayachandra Hari

The end use application of polymeric materials is mainly determined by their viscosity, thermal stability and processability. These properties are primarily determined by the segmental relaxation time (taualpha) of the polymer and its glass state modulus, which determines its glassy mechanical response. Developing design principles to obtain rational control over these properties would enable fabrication of new polymers or polymer blends with improved thermal stability, enhanced processability and better mechanical robustness of the material. Introduction of diluents and nanostructuring of the material serve as invaluable tools for altering polymers' glass transition and associated dynamic and mechanical properties. Besides providing guidelines for technologically important improvements in processability, glassy mechanical properties, and transport behavior, diluent effects and behavior of nanostructured materials can provide insights into the fundamental physics of the glass transition, for example, by elucidating the interrelation between high- and low-frequency structural relaxation processes. It has been previously suggested that there exists a similarity between how diluents and interfaces impact the glass formation behavior of the polymer, raising the possibility that the effects of these two polymer modifications may be separate manifestations of a common set of physics in glass forming polymers. Here we address several interrelated questions in the understanding of glass formation in polymer/diluent blends and nanostructured polymers. First, what is the relationship between a diluent's molecular structure and its impact on a polymer's glass formation behavior? How does this compare to the effect of interfaces? Second, how does the introduction of diluents impact the role of interfaces in modifying polymer glass formation? Third, how does the introduction of interfaces impact metrology of the polymer glass transition? Finally, we address a major open question regarding the role of interfaces in the formation of a new class of 'ultrastable' glassy materials. The major conclusions of this work are as follows. We show how the effect of diluent on polymer glass formation depends on its molecular properties like structure, backbone stiffness, interaction strength with the host polymer etc. These effects are shown to be predicted by a functional form analogous to the one shown in the literature for predicting Tg shits in nanostructure materials. We further show that these diluents when introduced in nanostructured materials, bring about Tg shifts in a manner which does not correlate completely with the bulk fragility of the material, as previously suggested. We also show that there are confounding variables other than bulk fragility of the material - such as composition gradients, variability in measurement of Tg using different experimental techniques, etc. - that need to be considered when identifying the Tg nanoconfinement effects of the material. We also address this issue of having metrological differences in measuring Tg, by establishing appropriate weighting factors to be used while using different experimental techniques to measure Tg of confined materials. Finally, we propose a three layer model of the interface in which a facilitated layer intermediate between the surface and bulk exhibits enhanced bulk like liquid density which leads to the emergence of exceptional mechanical properties in "ultrastable" glasses.

40 CFR 86.114-94 - Analytical gases.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and CO2 analyzers shall be single blends of CO and CO2 respectively using nitrogen as the diluent. (2... of the nominal value, using nitrogen as the diluent. (5) Fuel for FIDs and HFIDs and the methane analyzer shall be a blend of 40 ±2 percent hydrogen with the balance being helium. The mixture shall...

40 CFR 86.114-94 - Analytical gases.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and CO2 analyzers shall be single blends of CO and CO2 respectively using nitrogen as the diluent. (2... of the nominal value, using nitrogen as the diluent. (5) Fuel for FIDs and HFIDs and the methane analyzer shall be a blend of 40 ±2 percent hydrogen with the balance being helium. The mixture shall...

30 CFR 7.86 - Test equipment and specifications.

Code of Federal Regulations, 2014 CFR

2014-07-01

... balance shall be helium. The mixture shall contain ≤1 part per million equivalent carbon (ppmC), and ≤400... CO2 analyzers shall have purified nitrogen as a diluent. Calibration or span gases for the CH4 analyzer shall be CH4 with purified synthetic air or purified nitrogen as diluent. (19) Calibration or span...

40 CFR 86.114-94 - Analytical gases.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and CO2 analyzers shall be single blends of CO and CO2 respectively using nitrogen as the diluent. (2... of the nominal value, using nitrogen as the diluent. (5) Fuel for FIDs and HFIDs and the methane analyzer shall be a blend of 40 ±2 percent hydrogen with the balance being helium. The mixture shall...

40 CFR 86.114-94 - Analytical gases.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and CO2 analyzers shall be single blends of CO and CO2 respectively using nitrogen as the diluent. (2... of the nominal value, using nitrogen as the diluent. (5) Fuel for FIDs and HFIDs and the methane analyzer shall be a blend of 40 ±2 percent hydrogen with the balance being helium. The mixture shall...

40 CFR 86.114-94 - Analytical gases.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and CO2 analyzers shall be single blends of CO and CO2 respectively using nitrogen as the diluent. (2... of the nominal value, using nitrogen as the diluent. (5) Fuel for FIDs and HFIDs and the methane analyzer shall be a blend of 40 ±2 percent hydrogen with the balance being helium. The mixture shall...

21 CFR 73.1001 - Diluents in color additive mixtures for drug use exempt from certification.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Diluents in color additive mixtures for drug use exempt from certification. 73.1001 Section 73.1001 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs...

21 CFR 73.1001 - Diluents in color additive mixtures for drug use exempt from certification.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Diluents in color additive mixtures for drug use exempt from certification. 73.1001 Section 73.1001 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs...

21 CFR 73.1001 - Diluents in color additive mixtures for drug use exempt from certification.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Diluents in color additive mixtures for drug use exempt from certification. 73.1001 Section 73.1001 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs...

21 CFR 73.1001 - Diluents in color additive mixtures for drug use exempt from certification.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Diluents in color additive mixtures for drug use exempt from certification. 73.1001 Section 73.1001 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs...

40 CFR 1065.370 - CLD CO2 and H2O quench verification.

Code of Federal Regulations, 2013 CFR

2013-07-01

... gas divider that blends binary span gases with zero gas as the diluent and meets the specifications in... the maximum NO concentration expected during emission testing. (6) Zero and span the CLD analyzer... divider. Connect the NO span gas to the span port of the gas divider; connect a zero gas to the diluent...

40 CFR 1065.370 - CLD CO2 and H2O quench verification.

Code of Federal Regulations, 2012 CFR

2012-07-01

... gas divider that blends binary span gases with zero gas as the diluent and meets the specifications in... the maximum NO concentration expected during emission testing. (6) Zero and span the CLD analyzer... divider. Connect the NO span gas to the span port of the gas divider; connect a zero gas to the diluent...

40 CFR 1065.370 - CLD CO2 and H2O quench verification.

Code of Federal Regulations, 2014 CFR

2014-07-01

... gas divider that blends binary span gases with zero gas as the diluent and meets the specifications in... the maximum NO concentration expected during emission testing. (6) Zero and span the CLD analyzer... divider. Connect the NO span gas to the span port of the gas divider; connect a zero gas to the diluent...

40 CFR 1065.370 - CLD CO2 and H2O quench verification.

Code of Federal Regulations, 2011 CFR

2011-07-01

... gas divider that blends binary span gases with zero gas as the diluent and meets the specifications in... the maximum NO concentration expected during emission testing. (6) Zero and span the CLD analyzer... divider. Connect the NO span gas to the span port of the gas divider; connect a zero gas to the diluent...

40 CFR 75.72 - Determination of NOX mass emissions for common stack and multiple stack configurations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the hourly stack flow rate (in scfh). Only one methodology for determining NOX mass emissions shall be...-diluent continuous emissions monitoring system and a flow monitoring system in the common stack, record... maintain a flow monitoring system and diluent monitor in the duct to the common stack from each unit; or...

40 CFR 180.930 - Inert ingredients applied to animals; exemptions from the requirement of a tolerance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... clay Solid diluent, carrier Barium sulfate (CAS Reg. No. 7727-43-7) Carrier, density control agent...-Difluoroethane (CAS Reg. No. 75-37-6) For aerosol pesticide formulations used for insect control in food- and... tris-12-hydroxystearate Flow control agent Graphite Solid diluent, carrier n-Hexyl alcohol (CAS Reg. No...

Effect of naphtha diluent on greenhouse gases and reduced sulfur compounds emissions from oil sands tailings.

PubMed

Gee, Kathleen F; Poon, Ho Yin; Hashisho, Zaher; Ulrich, Ania C

2017-11-15

The long-term storage of oil sands tailings has resulted in the evolution of greenhouse gases (CH 4 and CO 2 ) as a result of residual organics biodegradation. Recent studies have identified black, sulfidic zones below the tailings-water interface, which may be producing toxic sulfur-containing gases. An anaerobic mesocosm study was conducted over an 11-week period to characterize the evolution of CH 4 , CO 2 and reduced sulfur compounds (RSCs) (including H 2 S) in tailings as it relates to naphtha-containing diluent concentrations (0.2, 0.8, and 1.5% w/v) and microbial activity. Our results showed that RSCs were produced first at 0.12μmol°RSCs/mL MFT (1.5% w/v diluent treatment). RSCs contribution (from highest to lowest) was H 2 S and 2-methylthiophene>2.5-dimethylthiophene>3-methylthiophene>thiofuran>butyl mercaptan>carbonyl sulfide, where H 2 S and 2-methylthiophene contributed 81% of the gas produced. CH 4 and CO 2 production occurred after week 5 at 40.7μmolCH 4 /mL MFT and 5.9μmolCO 2 /mL MFT (1.5% w/v diluent treatment). The amount of H 2 S and CH 4 generated is correlated to the amount of diluent present and to microbial activity as shown by corresponding increases in sulfate-reducers' Dissimilatory sulfite reductase (DsrAB) gene and methanogens' methyl-coenzyme M reductase (MCR) gene. Copyright © 2017 Elsevier B.V. All rights reserved.

Thermotemporal dynamics of contaminant bacteria and antimicrobials in extended porcine semen.

PubMed

Althouse, G C; Pierdon, M S; Lu, K G

2008-11-01

Bacterial contamination of extended porcine semen has been associated with deleterious effects on both semen quality and sow fertility. Retrospective, prospective and in vitro studies were performed to delineate the prevalence and behavior of certain bacterial contaminants in extended semen, and antimicrobial pharmacodynamics in various semen diluents. Retrospective review of extended semen samples submitted from North American boar studs for microbiological screening at the University of Pennsylvania Reference Andrology Laboratory in 2005 and 2006 yielded bacteriospermia prevalence rates of 17% (144/832) and 26% (256/984), respectively. In a prospective study of regional boar studs, of 91 extended semen samples tested over 1-y, 29% were positive for bacteriospermia. Retrospective and prospective studies both showed that the preponderance of contaminant positive samples occurred during the fall months (P<0.05). To better understand behavior of select contaminant bacteria, generation intervals were determined for Serratia marcescens (SM) and Achromobacter xylosoxidans (AX) at 16, 22 and 37 degrees C. Generation times were temperature-dependent, with intervals decreasing two- to four-fold as incubation temperature increased. Growth patterns for SM, AX and Burkholderia cepacia were evaluated in various semen diluents. The different diluents exhibited constant or episodic patterns of growth within and among bacteria throughout the 5-d test period. Kill-time kinetics at 37 degrees C of several genera of bacteria in four semen diluents containing amoxicillin, gentamicin, tylosin, and lincomycin/spectinomycin (single drug or combination) ranged from 75 to over 360min, and was highly dependent (P<0.05) upon both type of bacteria and semen diluent.

Fertility test of frozen boar semen.

PubMed

Osinowa, O; Salamon, S

1976-10-01

The fertility results of two experiments are presented. In experiment 1, the semen was frozen in tris-fructose-EDTA or BF3 diluents at 0-25 X 10(9)/ml sperm concentration and extended after thawing with either seminal plasma (SP) or the freezing medium (FM) containing no cryoprotective agent. In the second experiment the semen was glycerolated by two methods, frozen at 1-0 X 10(9)/ml sperm concentration, and extended wtih FM before insemination. Fertility after double insemination within one oestrus with semen frozen in tris-fructose-EDTA or BF3 diluents varied depending on the medium used for extension of thawed semen. The farrowing rates for semen frozen in the former diluent with FM and SP post-thawing media were 4/8 and 1/8 respectively, and for semen frozen BF3 diluent with FM and SP post-thawing extenders 1/8 and 5/8. The mean farrowing for the 32 animals inseminasted was 34-4%. Pregnancies for semen frozen in tris-fructose-EDTA and glycerolated at 30 or 5 degrees C were 5/12 and 4/12 respectively, and for single and double inseminations 6/12 and 3/12 respectively. Of 24 animals inseminated 37-5% farrowed.

Metabolic effects of artificial environments

NASA Technical Reports Server (NTRS)

Jordan, J. P.

1971-01-01

The mechanisms by which inert gases influence metabolism were investigated from several viewpoints. Groups of rats were exposed at the thermal neutral temperature of the respective mixtures, to normoxic (P sub A 02 = 100 mm Hq) environments with argon, helium or nitrogen as the diluent at a total pressure of one atmosphere. The possible influence of diluent gases on oxygen transport to the cell was examined with hypoxic (P sub A O2 = 70 mm Hg) mixtures of the same diluent gases. Metabolic measurements included food, water, and oxygen consumption, CO2 production, hematocrit and the rate C-14O2 of expiration subsequent to intraperitoneal injection of acetate-1-C-14 or glucose UL-C-14. Argon-exposed animals showed a consistently decreased metabolic rate while, on the other hand, helium-exposed rats did not significantly alter metabolic rate relative to nitrogen. Certain indices, including acetate and glucose utilization, suggested that helium attenuated the imposed hypoxia at the cellular level while argon facilitated it as compared with nitrogen. These results suggest that metabolic influence of helium is largely thermal in nature while argon has a significant direct metabolic effect and that diluent gases may selectively influence oxygen availability to the interior of the cell.

PREPARATION OF URANIUM HEXAFLUORIDE

DOEpatents

Lawroski, S.; Jonke, A.A.; Steunenberg, R.K.

1959-10-01

A process is described for preparing uranium hexafluoride from carbonate- leach uranium ore concentrate. The briquetted, crushed, and screened concentrate is reacted with hydrogen fluoride in a fluidized bed, and the uranium tetrafluoride formed is mixed with a solid diluent, such as calcium fluoride. This mixture is fluorinated with fluorine and an inert diluent gas, also in a fluidized bed, and the uranium hexafluoride obtained is finally purified by fractional distillation.

Significant Reduction in the Incidence of Phlebitis with Buffered Versus Unbuffered Cephalothin

PubMed Central

Bergeron, Michel G.; Brusch, John L.; Barza, Michael; Weinstein, Louis

1976-01-01

Cephalothin (1 g every 2 h), buffered cephalothin, and diluent alone (5% dextrose in water) were each administered for 4 days intravenously to 12 volunteers in a double-blind crossover study. The incidence of phlebitis with buffered cephalothin was significantly lower than that with unbuffered drug (P < 0.01) and almost identical to the incidence with diluent alone. PMID:1267438

Low HAP Materials

DTIC Science & Technology

2009-09-01

Use maleinized triglycerides to replace UPE • Use novel bio-based reactive diluent to replace styrene Bio-Based Carbon Fibers and Thermosetting Resins...SERDP proposed new start, FY10 • Microbially breakdown lignin into oligomers that can be melt spun and carbonized • Modify renewable...D5045-93 • Designed plant oil-based toughening agents • Uses phase separation to capture MFA reactive diluent • Increases toughness while decreasing

Effects of in ovo injection of carbohydrates on somatic characteristics and liver nutrient profiles of broiler embryos and hatchlings.

PubMed

Zhai, W; Bennett, L W; Gerard, P D; Pulikanti, R; Peebles, E D

2011-12-01

Effects of the in ovo injection of commercial diluent supplemented with dextrin or with dextrin in combination with various other carbohydrates on the somatic characteristics and liver nutrient profiles of Ross × Ross 708 broiler embryos and chicks were investigated. Results include information concerning the gluconeogenic energy status of the liver before and after hatch. Eggs containing live embryos were injected in the amnion on d 18 of incubation using an automated multiple-egg injector for the delivery of the following carbohydrates dissolved in 0.4 mL of commercial diluent: 1) 6.25% glucose and 18.75% dextrin; 2) 6.25% sucrose and 18.75% dextrin; 3) 6.25% maltose and 18.75% dextrin; and 4) 25% dextrin. Also, a noninjected control and a 0.4-mL diluent-injected control were included. Body weight relative to set egg weight on d 19 of incubation (E19) was increased by the injection of all carbohydrate solutions, and on the day of hatch was increased by the injection of diluent, sucrose and dextrin, and maltose and dextrin solutions. Hatchability of the fertilized eggs, residual yolk sac weight, and liver weight were not affected by any injection treatment; however, as compared with the 0.4 mL diluent-injected group, all of the supplementary carbohydrates, except for the glucose and dextrin combination group, increased liver glycogen and glucose concentrations on E19. Furthermore, all carbohydrates, except for the 25% dextrin treatment, decreased liver fat concentration on E19. From E19 to the day of hatch, liver glycogen concentrations dropped dramatically from an average of 3.2 to 0.6%. Despite treatment differences observed on E19 for liver glycogen, glucose, and fat concentrations, these differences were lost by the day of hatch. Nevertheless, liver glycogen and glucose concentrations were positively correlated on the day of hatch. In conclusion, the in ovo injection of various supplemental carbohydrates dissolved in 0.4 mL of commercial diluent altered the liver nutrient profile of Ross × Ross 708 broiler embryos before hatch. However, the subsequent pattern of energy utilization during the hatching process modified these effects.

Determination of trace level genotoxic impurities in small molecule drug substances using conventional headspace gas chromatography with contemporary ionic liquid diluents and electron capture detection.

PubMed

Ho, Tien D; Yehl, Peter M; Chetwyn, Nik P; Wang, Jin; Anderson, Jared L; Zhong, Qiqing

2014-09-26

Ionic liquids (ILs) were used as a new class of diluents for the analysis of two classes of genotoxic impurities (GTIs), namely, alkyl/aryl halides and nitro-aromatics, in small molecule drug substances by headspace gas chromatography (HS-GC) coupled with electron capture detection (ECD). This novel approach using ILs as contemporary diluents greatly broadens the applicability of HS-GC for the determination of high boiling (≥ 130°C) analytes including GTIs with limits of detection (LOD) ranging from 5 to 500 parts-per-billion (ppb) of analytes in a drug substance. This represents up to tens of thousands-fold improvement compared to traditional HS-GC diluents such as dimethyl sulfoxide (DMSO) and dimethylacetamide (DMAC). Various ILs were screened to determine their suitability as diluents for the HS-GC/ECD analysis. Increasing the HS oven temperatures resulted in varying responses for alkyl/aryl halides and a significant increase in response for all nitroaromatic GTIs. Linear ranges of up to five orders of magnitude were found for a number of analytes. The technique was validated on two active pharmaceutical ingredients with excellent recovery. This simple and robust methodology offers a key advantage in the ease of method transfer from development laboratories to quality control environments since conventional validated chromatographic data systems and GC instruments can be used. For many analytes, it is a cost effective alternative to more complex trace analytical methodologies like LC/MS and GC/MS, and significantly reduces the training needed for operation. Copyright © 2014 Elsevier B.V. All rights reserved.

A facile method of fabricating mechanical durable anti-icing coatings based on CeO2 microparticles

NASA Astrophysics Data System (ADS)

Wang, Pengren; Peng, Chaoyi; Wu, Binrui; Yuan, Zhiqing; Yang, Fubiao; Zeng, Jingcheng

2015-07-01

Compromising between hydrophobicity and mechanical durability may be a feasible approach to fabricating usable anti-icing coatings. This work improves the contact angle of current commercial anti-icing coatings applied to wind turbine blades dramatically and keeps relatively high mechanical durability. CeO2 microparticles and diluent were mixed with fluorocarbon resin to fabricate high hydrophobic coatings on the glass fiber reinforced epoxy composite substrates. The proportion of CeO2 microparticles and diluent influences the contact angles significantly. The optimum mass ratio of fluorocarbon resin to CeO2 microparticles to diluent is 1:1.5:1, which leads to the highest contact angle close to 140°. The microscopy analysis shows that the CeO2 microparticles form nano/microscale hierarchical structure on the surface of the coatings.

Graphite-to-Graphene: Total Conversion.

PubMed

Buzaglo, Matat; Bar, Ilan Pri; Varenik, Maxim; Shunak, Liran; Pevzner, Svetlana; Regev, Oren

2017-02-01

The rush to develop graphene applications mandates mass production of graphene sheets. However, the currently available complex and expensive production technologies are limiting the graphene commercialization. The addition of a protective diluent to graphite during ball-milling is demonstrated to result in a game-changer yield (>90%) of defect-free graphene, whose size is controlled by the milling energy and the diluent type. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

URANIUM EXTRACTION PROCESS

DOEpatents

Baldwin, W.H.; Higgins, C.E.

1958-12-16

A process is described for recovering uranium values from acidic aqueous solutions containing hexavalent uranium by contacting the solution with an organic solution comprised of a substantially water-immiscible organlc diluent and an organic phosphate to extract the uranlum values into the organic phase. Carbon tetrachloride and a petroleum hydrocarbon fraction, such as kerosene, are sultable diluents to be used in combination with organlc phosphates such as dibutyl butylphosphonate, trlbutyl phosphine oxide, and tributyl phosphate.

Double-Blind Comparison of Phlebitis Produced by Cephalothin Infusions with Buffered and Unbuffered Diluents

PubMed Central

Carrizosa, Jaime; Levison, Matthew E.; Kaye, Donald

1974-01-01

In a double-blind study with each patient as his own control, a buffered and an unbuffered cephalothin solution was administered to 13 patients in opposite arms for a period of 48 h each. Neither the incidence of phlebitis nor the degree of phlebitis was different with the two diluents, and there was no difference in the time of onset of phlebitis. PMID:4840431

Boar seminal plasma exosomes maintain sperm function by infiltrating into the sperm membrane.

PubMed

Du, Jian; Shen, Jian; Wang, Yuanxian; Pan, Chuanying; Pang, Weijun; Diao, Hua; Dong, Wuzi

2016-09-13

Seminal plasma ingredients are important for maintenance of sperm viability. This study focuses on the effect of boar seminal plasma exosomes on sperm function during long-term liquid storage. Boar seminal plasma exosomes had typical nano-structure morphology as measured by scanning electron microscopy (SEM) and molecular markers such as AWN, CD9 and CD63 by western blot analysis. The effect on sperm parameters of adding different ratio of boar seminal plasma exosomes to boar sperm preparations was analyzed. Compared to the diluent without exosomes, the diluent with four times or sixteen times exosomes compared to original semen had higher sperm motility, prolonged effective survival time, improved sperm plasma membrane integrity (p < 0.05), increased total antioxidant capacity (T-AOC) activity and decreased malondialdehyde (MDA) content. The diluent containing four times concentration of exosomes compared to original semen was determined to inhibit premature capacitation, but not to influence capacitation induced in vitro. Inhibition of premature capacitation is likely related to the concentration of exosomes which had been demonstrated to transfer proteins including AWN and PSP-1 into sperm. In addition, using fluorescence microscopy and scanning electron microscopy analysis, it was demonstrated that exosomes in diluent were directly binding to the membrane of sperm head which could improve sperm plasma membrane integrity.

Effects of treatment with butylated hydroxytoluene on the susceptibility of boar spermatozoa to cold stress and dilution.

PubMed

Bamba, K; Cran, D G

1992-05-01

Boar spermatozoa acquired resistance to cold shock immediately after exposure to 2.0 mmol butylated hydroxytoluene (BHT) l-1 when Beltsville thawing solution was used as a basic diluent, as judged by motility (the proportion of motile spermatozoa) and acrosomal integrity. The concentration of BHT could be reduced to 0.2 mmol l-1 without decreasing the protective action. However, motility was altered in the presence of greater than 0.15 mmol BHT l-1. Beltsville freezing 5 (BF5) diluent was more effective than Beltsville thawing solution in protecting spermatozoa from cold shock, but addition of BHT to BF5 diluent did not affect the motility and acrosomal morphology of spermatozoa before or after cold shock. Dilution of BHT-treated spermatozoa with BF5 diluent did not restore motility and did not afford further protection against cold shock; it was detrimental to spermatozoa treated with 2 mmol BHT l-1 for greater than 15 min. Egg yolk or lecithin had a detrimental effect. When spermatozoa were treated with 0.05-0.10 mmol BHT l-1 before slow cooling to 5 degrees C, the progressive motility and acrosomal integrity were maintained better after storage for 6 days than in untreated spermatozoa.

Effect of mixing method on the mixing degree during the preparation of triturations.

PubMed

Nakamura, Hitoshi; Yanagihara, Yoshitsugu; Sekiguchi, Hiroko; Komada, Fusao; Kawabata, Haruno; Ohtani, Michiteru; Saitoh, Yukiya; Kariya, Satoru; Suzuki, Hiroshi; Uchino, Katsuyoshi; Iga, Tatsuji

2004-03-01

By using lactose colored with erythrocin, we investigated the effects of mixing methods on mixing degree during the preparation of trituration with a mortar and pestle. The extent of powder dilution was set to 4 to 64 fold in the experiments. We compared the results obtained by using two methods: (1) one-step mixing of powders after addition of diluents and (2) gradual mixing of powders after addition of diluents. As diluents, we used crystallized lactose and powdered lactose for the preparation of trituration. In the preparation of 64-fold trituration, an excellent degree of mixing was obtained, with CV values of less than 6.08%, for both preparation methods and for the two kinds of diluents. The mixing of two kinds of powders whose distributions of particle sizes were similar resulted in much better degree of mixing, with CV values of less than 3.0%. However, the concentration of principal agents in 64-fold trituration was reduced by 20% due to the adsorption of dye to the apparatus. Under conditions in which a much higher dilution rate and/or much better degree of dilution was required, it must be necessary to dilute powders with considering their physicality and to determine the concentrations of principal agents after the mixing.

Boar seminal plasma exosomes maintain sperm function by infiltrating into the sperm membrane

PubMed Central

Du, Jian; Shen, Jian; Wang, Yuanxian; Pan, Chuanying; Pang, Weijun; Diao, Hua; Dong, Wuzi

2016-01-01

Seminal plasma ingredients are important for maintenance of sperm viability. This study focuses on the effect of boar seminal plasma exosomes on sperm function during long-term liquid storage. Boar seminal plasma exosomes had typical nano-structure morphology as measured by scanning electron microscopy (SEM) and molecular markers such as AWN, CD9 and CD63 by western blot analysis. The effect on sperm parameters of adding different ratio of boar seminal plasma exosomes to boar sperm preparations was analyzed. Compared to the diluent without exosomes, the diluent with four times or sixteen times exosomes compared to original semen had higher sperm motility, prolonged effective survival time, improved sperm plasma membrane integrity (p < 0.05), increased total antioxidant capacity (T-AOC) activity and decreased malondialdehyde (MDA) content. The diluent containing four times concentration of exosomes compared to original semen was determined to inhibit premature capacitation, but not to influence capacitation induced in vitro. Inhibition of premature capacitation is likely related to the concentration of exosomes which had been demonstrated to transfer proteins including AWN and PSP-1 into sperm. In addition, using fluorescence microscopy and scanning electron microscopy analysis, it was demonstrated that exosomes in diluent were directly binding to the membrane of sperm head which could improve sperm plasma membrane integrity. PMID:27542209

New hydrolytically stable solvent for Am/Eu separation in acidic media

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smirnov, I.V.; Babain, V.A.; Chirkov, A.V.

Americium and europium extraction by synergistic mixture of 2,6-bis(1-aryl-1H-tetrazol-5-yl)pyridines (ATP) - chlorinated cobalt dicarbollide (CCD) in polar diluent s from HNO{sub 3} media was studied. Meta-nitro-benzo-trifluoride, phenyl-tri-fluoro-methyl sulfone and 1,2-dichloroethane were used as diluents. The effect of diluent, composition of aqueous phase and substituent nature in aryl ring of ATPs on the extraction efficiency and selectivity of americium and europium separation was investigated. At the optimal ratio of nATP:CCD 1:1 the Am - Eu separation factor exceeded 90. Extraction of {sup 85}Sr, {sup 137}Cs and {sup 133}Ba was investigated and it was found that the mixture nATP-CCD provided the separationmore » of Sr /Ba pair with a factor of 35. High resistance of 2,6-bisaryltetrazolyl pyridines to the action of nitric acid was demonstrated. (authors)« less

Secondary fuel delivery system

DOEpatents

Parker, David M.; Cai, Weidong; Garan, Daniel W.; Harris, Arthur J.

2010-02-23

A secondary fuel delivery system for delivering a secondary stream of fuel and/or diluent to a secondary combustion zone located in the transition piece of a combustion engine, downstream of the engine primary combustion region is disclosed. The system includes a manifold formed integral to, and surrounding a portion of, the transition piece, a manifold inlet port, and a collection of injection nozzles. A flowsleeve augments fuel/diluent flow velocity and improves the system cooling effectiveness. Passive cooling elements, including effusion cooling holes located within the transition boundary and thermal-stress-dissipating gaps that resist thermal stress accumulation, provide supplemental heat dissipation in key areas. The system delivers a secondary fuel/diluent mixture to a secondary combustion zone located along the length of the transition piece, while reducing the impact of elevated vibration levels found within the transition piece and avoiding the heat dissipation difficulties often associated with traditional vibration reduction methods.

Extraction processes and solvents for recovery of cesium, strontium, rare earth elements, technetium and actinides from liquid radioactive waste

DOEpatents

Zaitsev, Boris N.; Esimantovskiy, Vyacheslav M.; Lazarev, Leonard N.; Dzekun, Evgeniy G.; Romanovskiy, Valeriy N.; Todd, Terry A.; Brewer, Ken N.; Herbst, Ronald S.; Law, Jack D.

2001-01-01

Cesium and strontium are extracted from aqueous acidic radioactive waste containing rare earth elements, technetium and actinides, by contacting the waste with a composition of a complex organoboron compound and polyethylene glycol in an organofluorine diluent mixture. In a preferred embodiment the complex organoboron compound is chlorinated cobalt dicarbollide, the polyethylene glycol has the formula RC.sub.6 H.sub.4 (OCH.sub.2 CH.sub.2).sub.n OH, and the organofluorine diluent is a mixture of bis-tetrafluoropropyl ether of diethylene glycol with at least one of bis-tetrafluoropropyl ether of ethylene glycol and bis-tetrafluoropropyl formal. The rare earths, technetium and the actinides (especially uranium, plutonium and americium), are extracted from the aqueous phase using a phosphine oxide in a hydrocarbon diluent, and reextracted from the resulting organic phase into an aqueous phase by using a suitable strip reagent.

On Identification of Critical Material Attributes for Compression Behaviour of Pharmaceutical Diluent Powders

PubMed Central

Zhang, Jianyi; Pan, Xin; Wu, Chuanbin

2017-01-01

As one of the commonly-used solid dosage forms, pharmaceutical tablets have been widely used to deliver active drugs into the human body, satisfying patient’s therapeutic requirements. To manufacture tablets of good quality, diluent powders are generally used in formulation development to increase the bulk of formulations and to bind other inactive ingredients with the active pharmaceutical ingredients (APIs). For formulations of a low API dose, the drug products generally consist of a large fraction of diluent powders. Hence, the attributes of diluents become extremely important and can significantly influence the final product property. Therefore, it is essential to accurately characterise the mechanical properties of the diluents and to thoroughly understand how their mechanical properties affect the manufacturing performance and properties of the final products, which will build a sound scientific basis for formulation design and product development. In this study, a comprehensive evaluation of the mechanical properties of the widely-used pharmaceutical diluent powders, including microcrystalline cellulose (MCC) powders with different grades (i.e., Avicel PH 101, Avicel PH 102, and DG), mannitol SD 100, lactose monohydrate, and dibasic calcium phosphate, were performed. The powder compressibility was assessed with Heckel and Kawakita analyses. The material elastic recovery during decompression and in storage was investigated through monitoring the change in the dimensions of the compressed tablets over time. The powder hygroscopicity was also evaluated to examine the water absorption ability of powders from the surroundings. It was shown that the MCC tablets exhibited continuous volume expansion after ejection, which is believed to be induced by (1) water absorption from the surrounding, and (2) elastic recovery. However, mannitol tablets showed volume expansion immediately after ejection, followed by the material shrinkage in storage. It is anticipated that the expansion was induced by elastic recovery to a limited extent, while the shrinkage was primarily due to the solidification during storage. It was also found that, for all powders considered, the powder compressibility and the elastic recovery depended significantly on the particle breakage tendency: a decrease in the particle breakage tendency led to a slight decrease in the powder compressibility and a significant drop in immediate elastic recovery. This implies that the particle breakage tendency is a critical material attribute in controlling the compression behaviour of pharmaceutical powders. PMID:28773204

Rotor for processing liquids using movable capillary tubes

DOEpatents

Johnson, Wayne F.; Burtis, Carl A.; Walker, William A.

1989-01-01

A rotor assembly for processing liquids, especially whole blood samples, is disclosed. The assembly includes apparatus for separating non-liquid components of whole blood samples from liquid components, apparatus for diluting the separated liquid component with a diluent and apparatus for transferring the diluted sample to an external apparatus for analysis. The rotor assembly employs several movable capillary tubes to handle the sample and diluents. A method for using the rotor assembly to process liquids is also described.

Rotor for processing liquids using movable capillary tubes

DOEpatents

Johnson, Wayne F [Loudon, TN; Burtis, Carl A [Oak Ridge, TN; Walker, William A [Knoxville, TN

1989-05-30

A rotor assembly for processing liquids, especially whole blood samples, is disclosed. The assembly includes apparatus for separating non-liquid components of whole blood samples from liquid components, apparatus for diluting the separated liquid component with a diluent and apparatus for transferring the diluted sample to an external apparatus for analysis. The rotor assembly employs several movable capillary tubes to handle the sample and diluents. A method for using the rotor assembly to process liquids is also described.

Phenylethynyl reactive diluents

NASA Technical Reports Server (NTRS)

Bryant, Robert G. (Inventor); Jensen, Brian J. (Inventor); Hergenrother, Paul M. (Inventor)

1995-01-01

A composition of matter having a specified general structure is employed to terminate a nucleophilic reagent, resulting in the exclusive production of phenylethynyl terminated reactive oligomers which display unique thermal characteristics. A reactive diluent having a specified general structure is employed to decrease the melt viscosity of a phenylethynyl terminated reactive oligomer and to subsequently react with to provide a thermosetting material of enhanced density. These materials have features which make them attractive candidates for use as composite matrices and adhesives.

Contact allergy to reactive diluents and related aliphatic epoxy resins.

PubMed

Aalto-Korte, Kristiina; Kuuliala, Outi; Henriks-Eckerman, Maj-Len; Suuronen, Katri

2015-06-01

Diglycidyl ether of bisphenol A resin (DGEBA-R) is the most common sensitizer in epoxy systems, but a minority of patients also develop contact allergy to reactive diluents. To analyse the frequency and clinical relevance of allergic reactions to different epoxy reactive diluents and related aliphatic epoxy resins. Test files (January 1991 to June 2014) were screened, and the clinical records of patients with allergic reactions were analysed for occupation, concomitant allergic reactions, and exposure. A total of 67 patients reacted to at least one of the compounds. The largest numbers of allergic reactions were to phenyl glycidyl ether (PGE; n = 41), 1,4-butanediol diglycidyl ether (BDDGE; n = 34), and p-tert-butylphenyl glycidyl ether (PTBPGE; n = 19). Ten of the patients did not have contact allergy to DGEBA-R. The reactions of 5 of these were related to the use of BDDGE-containing products. We found no significant exposure to PGE or PTBPGE in patients sensitized to them, but some of the patients had used cresyl glycidyl ether-containing products. Allergic reactions to reactive diluents and related aliphatic epoxy resins usually occurred together with reactions to DGEBA-R. BDDGE was the clinically most significant compound, and was the sole cause of occupational allergic contact dermatitis in 3 patients. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Toxicity of contaminated sediments in dilution series with control sediments

USGS Publications Warehouse

Nelson, M.K.; Landrum, P.F.; Burton, G.A.; Klaine, S.J.; Crecelius, E.A.; Byl, T.D.; Gossiaux, Duane C.; Tsymbal, V.N.; Cleveland, L.; Ingersoll, Christopher G.; Sasson-Brickson, G.

1993-01-01

The use of dilutions has been the foundation of our approach for assessing contaminated water, and accordingly, it may be important to establish similar or parallel approaches for sediment dilutions. Test organism responses to dilution gradients can identify the degree of necessary sediment alteration to reduce the toxicity. Using whole sediment dilutions to represent the complex interactions of in situ sediments can identify the toxicity, but the selection of the appropriate diluent for the contaminated sediment may affect the results and conclusions drawn. Contaminated whole sediments were examined to evaluate the toxicity of dilutions of sediments with a diversity of test organisms. Dilutions of the contaminated sediments were prepared with differing diluents that varied in organic carbon content, particle size distribution, and volatile solids. Studies were conducted using four macroinvertebrates and a vascular, rooted plant. Responses by some test organisms followed a sigmoidal dose-response curve, but others followed a U-shaped curve. Initial dilutions reduced toxicity as expected, but further dilution resulted in an increase in toxicity. The type of diluent used was an important factor in assessing the sediment toxicity, because the control soil reduced toxicity more effectively than sand as a diluent of the same sediment. Using sediment chemical and physical characteristics as an indicator of sediment dilution may not be as useful as chemical analysis of contaminants, but warrants further investigation.

Rotor for processing liquids using movable capillary tubes

DOEpatents

Johnson, W.F.; Burtis, C.A.; Walker, W.A.

1987-07-17

A rotor assembly for processing liquids, especially whole blood samples, is disclosed. The assembly includes apparatus for separating non-liquid components of whole blood samples from liquid components, apparatus for diluting the separated liquid component with a diluent and apparatus for transferring the diluted sample to an external apparatus for analysis. The rotor assembly employs several movable capillary tubes to handle the sample and diluents. A method for using the rotor assembly to process liquids is also described. 5 figs.

Deep freezing of Angora goat semen: effects of diluent composition and method and rate of dilution on survival of spermatozoa.

PubMed

Salamon, S; Ritar, A J

1982-01-01

Five factorial experiments were conducted to examine the effects of concentration of tris(hydroxymethyl)aminomethane (Tris), type and concentration of sugar in the diluent, rate and method of dilution on the survival of goat spermatozoa after freezing by the pellet method. Spermatozoa tolerated a relatively wide range in concentration of Tris, but the cell survival depended on the type of sugar included in the Tris diluent. Glucose and fructose were more suitable components than lactose or raffinose. Survival of spermatozoa after thawing was better for three- to fivefold prefreezing dilution. There was interaction between method of semen dilution (one-step, two-step), holding time at 5 degrees C, and glycerol concentration. The best result was obtained after one-step dilution at 30 degrees C (Tris 375 mM-glucose 41.625 mM-citric acid 124 mM), 1.5 h holding at 5 degrees C, and with 4% (v/v) glycerol concentration in the diluted semen.

Recovering low-turbidity cutting liquid from silicon slurry waste.

PubMed

Tsai, Tzu-Hsuan; Shih, Yu-Pei

2014-04-30

In order to recover a low-turbidity polyalkylene glycol (PAG) liquid from silicon slurry waste by sedimentation, temperatures were adjusted, and acetone, ethanol or water was used as a diluent. The experimental results show that the particles in the waste would aggregate and settle readily by using water as a diluent. This is because particle surfaces had lower surface potential value and weaker steric stabilization in PAG-water than in PAG-ethanol or PAG-acetone solutions. Therefore, water is the suggested diluent for recovering a low-turbidity PAG (<100 NTU) by sedimentation. After 50 wt.% water-assisted sedimentation for 21 days, the solid content of the upper liquid reduced to 0.122 g/L, and the turbidity decreased to 44 NTU. The obtained upper liquid was then vacuum-distillated to remove water. The final recovered PAG with 0.37 NTU had similar viscosity and density to the unused PAG and could be reused in the cutting process. Copyright © 2014 Elsevier B.V. All rights reserved.

Application of the SeDeM Diagram and a new mathematical equation in the design of direct compression tablet formulation.

PubMed

Suñé-Negre, Josep M; Pérez-Lozano, Pilar; Miñarro, Montserrat; Roig, Manel; Fuster, Roser; Hernández, Carmen; Ruhí, Ramon; García-Montoya, Encarna; Ticó, Josep R

2008-08-01

Application of the new SeDeM Method is proposed for the study of the galenic properties of excipients in terms of the applicability of direct-compression technology. Through experimental studies of the parameters of the SeDeM Method and their subsequent mathematical treatment and graphical expression (SeDeM Diagram), six different DC diluents were analysed to determine whether they were suitable for direct compression (DC). Based on the properties of these diluents, a mathematical equation was established to identify the best DC diluent and the optimum amount to be used when defining a suitable formula for direct compression, depending on the SeDeM properties of the active pharmaceutical ingredient (API) to be used. The results obtained confirm that the SeDeM Method is an appropriate system, effective tool for determining a viable formulation for tablets prepared by direct compression, and can thus be used as the basis for the relevant pharmaceutical development.

IER-297 CED-2: Final Design for Thermal/Epithermal eXperiments with Jemima Plates with Polyethylene and Hafnium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, A. J.; Percher, C. M.; Zywiec, W. J.

This report presents the final design (CED-2) for IER-297, and focuses on 15 critical configurations using highly enriched uranium (HEU) Jemima plates moderated by polyethylene with and without hafnium diluent. The goal of the U.S. Nuclear Criticality Safety Program’s Thermal/Epithermal eXperiments (TEX) is to design and conduct new critical experiments to address high priority nuclear data needs from the nuclear criticality safety and nuclear data communities, with special emphasis on intermediate energy (0.625 eV – 100 keV) assemblies that can be easily modified to include various high priority diluent materials. The TEX (IER 184) CED-1 Report [1], completed in 2012,more » demonstrated the feasibility of meeting the TEX goals with two existing NCSP fissile assets, plutonium Zero Power Physics Reactor (ZPPR) plates and highly enriched uranium (HEU) Jemima plates. The first set of TEX experiments will focus on using the plutonium ZPPR plates with polyethylene moderator and tantalum diluents.« less

PREPARATION OF ALKYL PYROPHOSPHATE EXTRACTANTS

DOEpatents

Levine, C.A.; Skiens, W.E.; Moore, G.R.

1960-08-01

A process for providing superior solvent extractants for metal recovery processes is given wherein the extractant comprises an alkyl pyrophosphoric acid ester dissolved in an organic solvent diluent. Finely divided solid P/sub 2/O/ sub 5/ is slurried in an organic solvent-diluent selected from organic solvents such as kerosene, benzene, chlorobenzene, toluene, etc. An alcohol selected from the higher alcohols having 4 to 17 carbon atoms. e.g.. hexanol-1. heptanol-3, octanol-1. 2.6-dimethyl-heptanol-4, and decanol-1, is rapidly added to the P/sub 2/O/sub 5/ slurry in the amount of about 2 moles of alcohol to 1 mole of P/sub 2/ O/sub 5/. The temperature is maintained below about 110 deg C during the course of the P/sub 2/O/sub 5/-alcohol reaction. An alkyl pyrophosphate extractant compound is formed as a consequence of the reaction process. The alkyl pyrophosphate solvent-diluent extractant phase is useful in solvent extraction metal recovery processes.

Weak interfaces for UV cure nanoimprint lithography

NASA Astrophysics Data System (ADS)

Houle, Frances; Fornof, Ann; Simonyi, Eva; Miller, Dolores; Truong, Hoa

2008-03-01

Nanoimprint lithography using a photocurable organic resist provides a means of patterning substrates with a spatial resolution in the few nm range. The usefulness of the technique is limited by defect generation during template removal, which involves fracture at the interface between the template and the newly cured polymer. Although it is critical to have the lowest possible interfacial fracture toughness (Gc less than 0.1 Jm-2) to avoid cohesive failure in the polymer, there is little understanding on how to achieve this using reacting low viscosity resist fluids. Studies of debonding of a series of free-radical cured polyhedral silsesquioxane crosslinker formulations containing selected reactive diluents from fluorosilane-coated quartz template materials will be described. At constant diluent fraction the storage modulus of cured resists follows trends in initial reaction rate, not diluent Tg. Adhesion is uncorrelated with both Tg and storage modulus. XPS studies of near-interface compositions indicate that component segregation within the resist fluid on contact with the template, prior to cure, plays a significant role in controlling the fracture process.

SURVEY OF RECENT DEVELOPMENTS IN SOLVENT EXTRACTION WITH TRIBUTYL PHOSPHATE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanco, R.E.; Blake, C.A. Jr.; Davis, W. Jr.

Tributyl phosphate can be used for extraction in processing all current power reactor fuels. Nitric acid is the only salting agent required. Typical flowsheets are presented. In aluminum nitrate systems which are more than 0.1 M acid deficient, the uranium distribution coefficient is a function of pH and independent of aluminum concentration; the coefficient remains constant at one in fluoride systems when the nitrate to fluoride ratio is approximates 3.5. Many objectionable properties of degraded diluents are ascribed to nitroparaffins. Aliphatic diluents with the least branching are the most stable to nitration. The nitration stability of aromatic diluents varies withmore » structure, e.g., stabilities of diethylbenzenes decrease as meta >> ortho > para. Solvent purification by flash distillation appears superior to other methods. The stability of Amsco 125-82 was permanently improved by treatment with sulfuric acid. The radiation stability of TBP was approximates 2 times higher in an aromatic diluent than in Amsco 125-82. The G decomposition value for 1 M TBP in Amsco alone was approximates 0.9; whereas in 1 to 3 M HNO/sub 3/ it was 1 to 5 and G (--HNO/sub 3/ org phase) was 3 to 20. Variation of uranium--thorium separation factors with structure of some neutral organophosphorus reagents is presented. Basic studies include measurement of activities in multicomponent solutions and description of aqueous activity coefficients by an extended Debye- Huckel equation. (auth)« less

Formation of anisotropic hollow-fiber membranes via thermally induced phase separation

NASA Astrophysics Data System (ADS)

Batarseh, Melanie Turkett

The goal of this research project was to study the formation of anisotropic hollow fiber membranes via thermally induced phase separation (TIPS). This objective included developing a fundamental knowledge of the factors that contribute to anisotropy and studying how anisotropy can be controlled via operational parameters in hollow fiber spinning. The objective was met by creating a model to simulate the mass and heat transfer in the fiber wall during spinning and by experimentally varying spinning parameters and observing the affect on the membrane microstructure. The TIPS membrane formation process consists of forming a homogeneous solution of polymer and diluent and extruding the solution through a spinneret to form a hollow fiber. The fiber is cooled in an air gap followed by a quench bath, which results in phase separation of the solution into a diluent-rich phase dispersed in a continuous polymer-rich liquid phase. The diluent-rich domains grow in size until the polymer-rich phase crystallizes. Then the diluent is removed, and the spaces left behind become the pores of the microporous membrane. Therefore, the size of the diluent-rich domains when the polymer solidifies is related to the size of the pores in the finished membrane. Increasing the polymer concentration of the homogeneous solution or increasing the cooling rate of the phase separated solution decreases the domain size, and thus decreases pore size. An anisotropic membrane, which has a gradation of pore size from small pores at the feed-side to large pores at the permeate-side, can be formed by creating a concentration gradient or a cooling rate gradient across the membrane. In hollow fiber spinning, a concentration gradient can be created by allowing diluent to evaporate from the outside wall of the fiber in the air gap, and a cooling rate gradient can be created by quenching the fiber in a liquid bath. The spinning model calculates concentration and temperature profiles across the hollow fiber wall over time. The model results indicate that spinning temperature, air velocity, and air gap length have a significant effect on the concentration profile in the wall, and spinning temperature and quench temperature have a significant effect on the cooling rate profile. Experimental results indicate that increasing the air gap length from 5 to 50 cm. or increasing the quench temperature from 298 to 323 K has a significant effect on the anisotropic structure of the hollow fiber.

XeCl Avalanche discharge laser employing Ar as a diluent

DOEpatents

Sze, Robert C.

1981-01-01

A XeCl avalanche discharge exciplex laser which uses a gaseous lasing starting mixture of: (0.2%-0.4% chlorine donor/2.5%-10% Xe/97.3%-89.6% Ar). The chlorine donor normally comprises HCl but can also comprise CCl.sub.4 BCl.sub.3. Use of Ar as a diluent gas reduces operating pressures over other rare gas halide lasers to near atmospheric pressure, increases output lasing power of the XeCl avalanche discharge laser by 30% to exceed KrF avalanche discharge lasing outputs, and is less expensive to operate.

Indriect Measurement Of Nitrogen In A Mult-Component Natural Gas By Heating The Gas

DOEpatents

Morrow, Thomas B.; Behring, II, Kendricks A.

2004-06-22

Methods of indirectly measuring the nitrogen concentration in a natural gas by heating the gas. In two embodiments, the heating energy is correlated to the speed of sound in the gas, the diluent concentrations in the gas, and constant values, resulting in a model equation. Regression analysis is used to calculate the constant values, which can then be substituted into the model equation. If the diluent concentrations other than nitrogen (typically carbon dioxide) are known, the model equation can be solved for the nitrogen concentration.

Using the fundamentals of adsorption to understand peak distortion due to strong solvent effect in hydrophilic interaction chromatography.

PubMed

Gritti, Fabrice; Sehajpal, Jyotsna; Fairchild, Jacob

2017-03-17

The peak distortion observed in hydrophilic interaction chromatography (HILIC) may be caused by the sample diluent to mobile phase mismatch. The United States Pharmacopeia (USP) method for organic impurities in cetirizine HCl tablets calls for such a mismatch, having a higher concentration of strong solvent in the sample diluent than in the mobile phase. A significant peak deformation is reported for cetirizine (a second-generation antihistamine) when it is purified on a Ethylene Bridged Hybrid (BEH) HILIC column (4.6mm×100mm, 2.5μm particles) using an acetonitrile-water eluent mixture and a sample diluent containing 7% and 9% water (in volume), respectively. The mechanism and physical origin of such peak distortion are related to (1) the diluent-to-eluent excess of water that propagates along the column at a velocity similar to that of the analyte, (2) the significant drop of the Henry's constant of the analyte upon increasing water concentration in the eluent, (3) the sample volume injected, and (4) to the pre-column sample dilution factor that depends on the characteristics of the LC instrument used. This proposed mechanism is validated from the calculation of the concentration profiles of cetirizine and water by using the equilibrium-dispersive (ED) model of chromatography. The observed distortion of cetirizine peaks is successfully predicted from the measurement of (1) the excess adsorption isotherm of water from acetonitrile onto the BEH HILIC adsorbent, (2) the retention factor of cetirizine as a function of the volume fraction (7, 8, and 9%) of water in the mobile phase, and (3) of the pre-column sample dispersion related to the instrument used (HPLC or UHPLC). The results of the calculations enables the user to anticipate the impacts of the diluent-to-eluent mismatch in water content, the injection volume, the analyte retention under infinite dilution, and of the pre-column sample dispersion on the amplitude of peak distortion in HILIC. Appropriate and permitted alterations of the USP method are then suggested based on a sound physico-chemical approach. Copyright © 2017 Elsevier B.V. All rights reserved.

Drug Release Studies from Caesalpinia pulcherrima Seed Polysaccharide.

PubMed

Jeevanandham, Somasundaram; Dhachinamoorthi, Duraiswamy; Bannoth Chandra Sekhar, Kothapalli

2011-01-01

This study examines the controlled release behavior of both water-soluble (acetaminophen, caffeine, theophylline and salicylic acid) and water insoluble (indomethacin) drugs derived from Caesalpinia pulcherrima seed Gum isolated from Caesalpinia pulcherrima kernel powder. It further investigates the effect of incorporating diluents such as microcrystalline cellulose and lactose on caffeine release. In addition the effect the gum's (polysaccharide) partial cross-linking had on release of acetaminophen was examined. Applying the exponential equation, the soluble drugs mechanism of release was found to be anomalous. The insoluble drugs showed a near case II or zero order release mechanism. The rate of release in descending order was caffeine, acetaminophen, theophylline, salicylic acid and indomethacin. An increase in the release kinetics of the drug was observed on blending with diluents. However, the rate of release varied with the type and amount of blend within the matrix. The mechanism of release due to effect of diluents was found to be anomalous. The rate of drug release decreased upon partial cross-linking and the mechanism of release was found to be of super case II.

Survival of Campylobacter jejuni inoculated into ground beef.

PubMed Central

Stern, N J; Kotula, A W

1982-01-01

Ground beef was inoculated with mixed cultures of Campylobacter jejuni, and the samples were subjected to various cooking and cold-storage temperatures. When samples were heated in an oven at either 190 or 218 degrees C, approximately 10(7) cells of C. jejuni per g were inactivated (less than 30 cells per g) in less than 10 min after the ground beef reached an internal temperature of 70 degrees C. When the samples were held at -15 degrees C over 14 days of storage, the numbers of C. jejuni declined by 3 log10. When inoculated samples were stored with an equal amount of Cary-Blair diluent at 4 degrees C, no changes in viability were observed over 14 days of storage. Twenty-five times as much C. jejuni was recovered from inoculated ground beef when either 10% glycerol or 10% dimethyl sulfoxide was added to an equal amount of ground beef before freezing as was recovered from peptone-diluted ground beef. Twice as much inoculated C. jejuni was recovered from ground beef plus Cary-Blair diluent as was recovered from ground beef plus peptone diluent. PMID:7181502

Differences in the API 20E biochemical patterns of clinical and environmental Vibrio parahaemolyticus isolates.

PubMed

Martinez-Urtaza, Jaime; Lozano-Leon, Antonio; Viña-Feas, Alejandro; de Novoa, Jacobo; Garcia-Martin, Oscar

2006-02-01

Genetic differences in clinical and environmental strains of Vibrio parahaemolyticus have been widely used as criteria in identifying pathogenic isolates. However, few studies have been carried out to assess the differences in biochemical characteristics of V. parahaemolyticus isolates from human and environmental sources. We compared the biochemical profiles obtained by the characterization of V. parahaemolyticus isolates from human infections and the marine environment using the API 20E system. Environmental and clinical isolates showed significant differences in the gelatin and arabinose tests. Additionally, clinical isolates were correctly identified according to the API 20E profile using 0.85% NaCl diluent, but they presented nonspecific profiles with 2% NaCl diluent. In contrast, use of 2% NaCl diluent facilitated correct identification of the environmental isolates. Clinical isolates showed significant differences in up to five biochemical tests with respect to the API 20E database. The API 20E system is widely used in routine identification of bacteria in clinical laboratories, and this discrepancy in an important number of biochemical tests may lead to misidentification of V. parahaemolyticus infection.

Method for depositing high-quality microcrystalline semiconductor materials

DOEpatents

Guha, Subhendu [Bloomfield Hills, MI; Yang, Chi C [Troy, MI; Yan, Baojie [Rochester Hills, MI

2011-03-08

A process for the plasma deposition of a layer of a microcrystalline semiconductor material is carried out by energizing a process gas which includes a precursor of the semiconductor material and a diluent with electromagnetic energy so as to create a plasma therefrom. The plasma deposits a layer of the microcrystalline semiconductor material onto the substrate. The concentration of the diluent in the process gas is varied as a function of the thickness of the layer of microcrystalline semiconductor material which has been deposited. Also disclosed is the use of the process for the preparation of an N-I-P type photovoltaic device.

Solvent for the simultaneous recovery of radionuclides from liquid radioactive wastes

DOEpatents

Romanovskiy, Valeriy Nicholiavich; Smirnov, Igor V.; Babain, Vasiliy A.; Todd, Terry A.; Brewer, Ken N.

2002-01-01

The present invention relates to solvents, and methods, for selectively extracting and recovering radionuclides, especially cesium and strontium, rare earths and actinides from liquid radioactive wastes. More specifically, the invention relates to extracting agent solvent compositions comprising complex organoboron compounds, substituted polyethylene glycols, and neutral organophosphorus compounds in a diluent. The preferred solvent comprises a chlorinated cobalt dicarbollide, diphenyl-dibutylmethylenecarbamoylphosphine oxide, PEG-400, and a diluent of phenylpolyfluoroalkyl sulfone. The invention also provides a method of using the invention extracting agents to recover cesium, strontium, rare earths and actinides from liquid radioactive waste.

Method for the simultaneous recovery of radionuclides from liquid radioactive wastes using a solvent

DOEpatents

Romanovskiy, Valeriy Nicholiavich; Smirnov, Igor V.; Babain, Vasiliy A.; Todd, Terry A.; Brewer, Ken N.

2001-01-01

The present invention relates to solvents, and methods, for selectively extracting and recovering radionuclides, especially cesium and strontium, rare earths and actinides from liquid radioactive wastes. More specifically, the invention relates to extracting agent solvent compositions comprising complex organoboron compounds, substituted polyethylene glycols, and neutral organophosphorus compounds in a diluent. The preferred solvent comprises a chlorinated cobalt dicarbollide, diphenyl-dibutylmethylenecarbamoylphosphine oxide, PEG-400, and a diluent of phenylpolyfluoroalkyl sulfone. The invention also provides a method of using the invention extracting agents to recover cesium, strontium, rare earths and actinides from liquid radioactive waste.

XeCl avalanche discharge laser employing Ar as a diluent

DOEpatents

Sze, R.C.

1979-10-10

A XeCl avalanche discharge exciplex laser which uses a gaseous lasing starting mixture of: 0.2 to 0.4% chlorine donor/2.5% to 10% Xe/97.3% to 89.6% Ar) is provided. The chlorine donor normally comprises HCl but can also comprise CCl/sub 4/ BCl/sub 3/. Use of Ar as a diluent gas reduces operating pressures over other rare gas halide lasers to near atmospheric pressure, increases output lasing power of the XeCl avalanche discharge laser by 30% to exceed KrF avalanche discharge lasing outputs, and is less expensive to operate.

Replacing egg yolk with soybean lecithin in the cryopreservation of stallion semen.

PubMed

Papa, Frederico Ozanam; Felício, Gabriel Barcelos; Melo-Oña, Cely Marini; Alvarenga, Marco Antonio; De Vita, Bruna; Trinque, Cássio; Puoli-Filho, José Nicolau P; Dell'Aqua, José Antonio

2011-11-01

The objective of this study was to determine whether replacing the egg yolk with soybean lecithin in the Botu-Crio® cryodiluent would maintain the fertility of cryopreserved stallion sperm. Two experiments were performed to evaluate cell freezability. In experiment 1, sperm from 15 stallions were frozen in Botu-Crio® (BC) or Botu-Crio® which contained 45g/L soybean lecithin (BCLS45) in place of the egg yolk. In experiment 2, we compared different concentrations of soybean lecithin: 0, 10.0, 12.5, 15.0, 17.5 and 20.0g/L (BC, BCLS10, BCLS12.5, BCLS17.5 and BCLS20, respectively). In experiment 1, sperm frozen in BC and BCLS45 exhibited similar (P>0.05) percentages of total motile sperm (61% and 61%, respectively); progressively motile sperm (27% and 27%, respectively) and sperm with intact plasma membranes (IMP; 53% and 57%, respectively). Similarly, sperm frozen in BC or BC containing any concentration of soybean lecithin maintained similar (P>0.05) percentages of total motile sperm (61-68%) and progressively motile sperm (27-31%). In the first fertility trial, we used cryopreserved semen from a single stallion was inseminated into mares. The semen from the sperm that were frozen in BC diluent resulted in a higher fertility rate (66%, 16/24) compared to the sperm that were frozen in BCLS45 diluent (17%, 5/29; P<0.01). Similarly, in a second fertility trial, the mares that were inseminated with the sperm that were frozen in BC diluent exhibited a higher fertility rate (66%, 16/24) compared to the mares that were inseminated with the sperm that were frozen in BCLS20 (40%, 10/25; P<0.05). Finally, in a third trial, the sperm that were frozen in BC resulted in a higher fertility rate in mares (75%, 18/24) compared to the sperm that were frozen in BCLS10 (41%, 10/24; P<0.05). Although replacing the egg yolk in the BC cryodiluent with soybean lecithin provided similar laboratory results for stallion sperm, after cryopreservation, the sperm that was frozen with soybean lecithin in the diluent correlated with lower fertility rates. Based on these results, we concluded that the use of BCLS can be used as an alternative diluent for cryopreserving stallion sperm. However, the resulting reduced fertility rate is a matter of concern. Further studies are necessary to clarify the reasons for this decrease in fertility and to determine the optimal lecithin concentration for diluents to freeze stallion sperm. Copyright © 2011 Elsevier B.V. All rights reserved.

Ostrich specific semen diluent and sperm motility characteristics during in vitro storage.

PubMed

Smith, A M J; Bonato, M; Dzama, K; Malecki, I A; Cloete, S W P

2018-06-01

The dilution of semen is a very important initial process for semen processing and evaluation, storage and preservation in vitro and efficient artificial insemination. The aim of the study was to evaluate the effect of two synthetic diluents (OS1 and OS2) on ostrich sperm motility parameters during in vitro storage. Formulation of OS1 was based on macro minerals (Na, K, P, Ca, Mg) and OS2 on the further addition of micro minerals (Se and Zn), based on mineral concentration determined in the ostrich seminal plasma (SP). Sperm motility was evaluated at different processing stages (neat, after dilution, during storage and after storage) by measuring several sperm motility variables using the Sperm Class Analyzer® (SCA). Processing (dilution, cooling and storage) of semen for in vitro storage purposes decreased the values for all sperm motility variables measured. The percentage motile (MOT) and progressive motile (PMOT) sperm decreased 20% to 30% during 24 h of storage, independent of diluent type. Quality of sperm swim (LIN, STR and WOB), however, was sustained during the longer storage periods (48 h) with the OS2 diluent modified with Se and Zn additions. Quality of sperm swim with use of OS1 was 6% to 8% less for the LIN, STR, and WOB variables. Male fitted as a fixed effect accounted for >60% of the variation for certain sperm motility variables (PMOT, MOT, VCL, VSL, VAP and ALH) evaluated at different processing stages. Semen from specific males had sustained sperm motility characteristics to a greater extent than that of other males during the 24-h storage period. Copyright © 2018 Elsevier B.V. All rights reserved.

High precision measurement of silicon in naphthas by ICP-OES using isooctane as diluent.

PubMed

Gazulla, M F; Rodrigo, M; Orduña, M; Ventura, M J; Andreu, C

2017-03-01

An analytical protocol for the accurate and precise determination of Si in naphthas is presented by using ICP-OES, optimizing from the sample preparation to the measurement conditions, in order to be able to analyze for the first time silicon contents below 100µgkg -1 in a relatively short time thus being used as a control method. In the petrochemical industry, silicon can be present as a contaminant in different petroleum products such as gasoline, ethanol, or naphthas, forming different silicon compounds during the treatment of these products that are irreversibly adsorbed onto catalyst surfaces decreasing its time life. The complex nature of the organic naphtha sample together with the low detection limits needed make the analysis of silicon quite difficult. The aim of this work is to optimize the measurement of silicon in naphthas by ICP-OES introducing as an improvement the use of isooctane as diluent. The set up was carried out by optimizing the measurement conditions (power, nebulizer flow, pump rate, read time, and viewing mode) and the sample preparation (type of diluent, cleaning process, blanks, and studying various dilution ratios depending on the sample characteristics). Copyright © 2016 Elsevier B.V. All rights reserved.

Postprocedural pain in shoulder arthrography: differences between using preservative-free normal saline and normal saline with benzyl alcohol as an intraarticular contrast diluent.

PubMed

Storey, Troy F; Gilbride, George; Clifford, Kelly

2014-11-01

The purpose of this study was to prospectively evaluate the effect of benzyl alcohol, a common preservative in normal saline, on postprocedural pain after intraarticular injection for direct shoulder MR arthrography. From April 2011 through January 2013, 138 patients underwent direct shoulder MR arthrography. Using the Wong-Baker Faces Pain Scale, patients were asked to report their shoulder pain level immediately before and immediately after the procedure and then were contacted by telephone 6, 24, and 48 hours after the procedure. Fourteen patients did not receive the prescribed amount of contrast agent for diagnostic reasons or did not complete follow-up. Sixty-two patients received an intraarticular solution including preservative-free normal saline (control group) and 62 patients received an intraarticular solution including normal saline with 0.9% benzyl alcohol as a contrast diluent (test group). Patients were randomized as to which intraarticular diluent they received. Fluoroscopic and MR images were reviewed for extracapsular contrast agent administration or extravasation, full-thickness rotator cuff tears, and adhesive capsulitis. The effect of preservative versus control on pain level was estimated with multiple regression, which included time after procedure as the covariate and accounted for repeated measures over patients. Pain scale scores were significantly (p = 0.0382) higher (0.79 units; 95% CI, 0.034-1.154) with benzyl alcohol preservative compared with control (saline). In both study arms, the pain scale scores decreased slightly after the procedure, increased by roughly 1 unit over baseline for the test group and 0.3 unit over baseline for the control group by 6 hours after the procedure, were 0.50 unit over baseline for the test group and 0.12 unit over baseline for the control group at 24 hours, then fell to be slightly greater than baseline at 48 hours with benzyl alcohol and slightly less than baseline without benzyl alcohol. These trends over time were highly significant (p < 0.0001). Shoulder arthrography is often associated with postprocedural discomfort that begins immediately after the procedure and resolves by 48 hours. There is significantly increased patient discomfort at 6 and 48 hours when using normal saline preserved with benzyl alcohol as a diluent compared with using normal saline without preservative as a diluent.

Fluorometric assessments of viability and mitochondrial status of boar spermatozoa following liquid storage.

PubMed

Fraser, L; Lecewicz, M; Strzezek, J

2002-01-01

A study was conducted to assess viability and mitochondrial status of boar spermatozoa stored at 5 degrees C and 16 degrees C. Gel-free ejaculates, collected from 3 mature boars, were extended in a standard diluent (K3) supplemented with a low-density lipoprotein fraction (LDF) isolated from egg yolk, and stored for 96 h at 5 degrees C and 16 degrees C. Motility analysis was conducted after semen dilution (D0) and on D1-D4 of storage. A double staining method, rhodamine 123 (R123) and propidium iodide (PI), was used to assess sperm viability and mitochondrial status. Sperm viability was also assessed using Hoechst 33,258 (H33258) stain. In fresh semen samples, the percentage of motility was significantly correlated with the percentage of viable spermatozoa with functional mitochondria (R123-PI), viable spermatozoa determined by H33258 staining and ATP content (r = 0.88, p < or = 0.01; r = 0.69, p < or = 0.05; r = 0.77, p < or = 0.01, respectively). The ATP content was also positively correlated with the percentage of viable spermatozoa with functional mitochondria (r = 0.76, p < or = 0.01). Sperm cells progressively lost motility, viability and mitochondrial capacity when stored in the supportive media at 5 degrees C and 16 degrees C. Motility estimates were lower (p < or = 0.05) than the percentage of viable spermatozoa with functional mitochondria during storage in K3 and LDF-based diluents on D4 and D3-D4, respectively. Deterioration in motility and membrane integrity was less marked in spermatozoa stored in LDF-based diluents. Spermatozoa doubly-stained with R123-PI appeared to possess some functional mitochondria, particularly in LDF-based diluent semen. Estimates of sperm viability, as determined by R123-PI staining, were equivalent (p > or = 0.05) to estimates made using H33258 staining. A decrease in mitochondrial activity, as measured by R123 uptake, was accompanied by lower ATP content in spermatozoa stored in K3 and LDF-based diluents after 48 h and 72 h of storage, respectively. Fluorometric measurements of viability and mitochondrial status of boar spermatozoa during liquid storage seem to provide reliable information about the sperm functional membranes.

Fuel-air munition and device

DOEpatents

Carlson, Gary A.

1976-01-01

An aerially delivered fuel-air munition consisting of an impermeable tank filled with a pressurized liquid fuel and joined at its two opposite ends with a nose section and a tail assembly respectively to complete an aerodynamic shape. On impact the tank is explosively ruptured to permit dispersal of the fuel in the form of a fuel-air cloud which is detonated after a preselected time delay by means of high explosive initiators ejected from the tail assembly. The primary component in the fuel is methylacetylene, propadiene, or mixtures thereof to which is added a small mole fraction of a relatively high vapor pressure liquid diluent or a dissolved gas diluent having a low solubility in the primary component.

Method for extracting lanthanides and actinides from acid solutions by modification of purex solvent

DOEpatents

Horwitz, E. Philip; Kalina, Dale G.

1986-01-01

A process for the recovery of actinide and lanthanide values from aqueous solutions with an extraction solution containing an organic extractant having the formula: ##STR1## where .phi. is phenyl, R.sup.1 is a straight or branched alkyl or alkoxyalkyl containing from 6 to 12 carbon atoms and R.sup.2 is an alkyl containing from 3 to 6 carbon atoms and phase modifiers in a water-immiscible hydrocarbon diluent. The addition of the extractant to the Purex process extractant, tri-n-butylphosphate in normal paraffin hydrocarbon diluent, will permit the extraction of multivalent lanthanide and actinide values from 0.1 to 12.0 molar acid solutions.

DSC and curing kinetics study of epoxy grouting diluted with furfural -acetone slurry

NASA Astrophysics Data System (ADS)

Yin, H.; Sun, D. W.; Li, B.; Liu, Y. T.; Ran, Q. P.; Liu, J. P.

2016-07-01

The use of furfural-acetone slurry as active diluents of Bisphenol-A epoxy resin (DGEBA) groutings has been studied by dynamic and non-isothermal DSC for the first time. Curing kinetics study was investigated by non-isothermal differential scanning calorimetries at different heating rates. Activation enery (Ea) was calculated based on Kissinger and Ozawa Methods, and the results showed that Ea increased from 58.87 to 71.13KJ/mol after the diluents were added. The furfural-acetone epoxy matrix could cure completely at the theoretical curing temperature of 365.8K and the curing time of 139mins, which were determined by the kinetic model parameters.

Solvent wash solution

DOEpatents

Neace, J.C.

1984-03-13

A process is claimed for removing diluent degradation products from a solvent extraction solution, which has been used to recover uranium and plutonium from spent nuclear fuel. A wash solution and the solvent extraction solution are combined. The wash solution contains (a) water and (b) up to about, and including, 50 vol % of at least one-polar water-miscible organic solvent based on the total volume of the water and the highly-polar organic solvent. The wash solution also preferably contains at least one inorganic salt. The diluent degradation products dissolve in the highly-polar organic solvent and the organic solvent extraction solvent do not dissolve in the highly-polar organic solvent. The highly-polar organic solvent and the extraction solvent are separated.

Solvent wash solution

DOEpatents

Neace, James C.

1986-01-01

Process for removing diluent degradation products from a solvent extraction solution, which has been used to recover uranium and plutonium from spent nuclear fuel. A wash solution and the solvent extraction solution are combined. The wash solution contains (a) water and (b) up to about, and including, 50 volume percent of at least one-polar water-miscible organic solvent based on the total volume of the water and the highly-polar organic solvent. The wash solution also preferably contains at least one inorganic salt. The diluent degradation products dissolve in the highly-polar organic solvent and the organic solvent extraction solvent do not dissolve in the highly-polar organic solvent. The highly-polar organic solvent and the extraction solvent are separated.

Indirect Measurement Of Nitrogen In A Multi-Component Gas By Measuring The Speed Of Sound At Two States Of The Gas.

DOEpatents

Morrow, Thomas B.; Behring, II, Kendricks A.

2004-10-12

A methods of indirectly measuring the nitrogen concentration in a gas mixture. The molecular weight of the gas is modeled as a function of the speed of sound in the gas, the diluent concentrations in the gas, and constant values, resulting in a model equation. Regression analysis is used to calculate the constant values, which can then be substituted into the model equation. If the speed of sound in the gas is measured at two states and diluent concentrations other than nitrogen (typically carbon dioxide) are known, two equations for molecular weight can be equated and solved for the nitrogen concentration in the gas mixture.

Methods and apparatuses for deoxygenating biomass-derived pyrolysis oil

DOEpatents

Baird, Lance Awender; Brandvold, Timothy A.

2015-10-20

Embodiments of methods and apparatuses for deoxygenating a biomass-derived pyrolysis oil are provided. In one example, a method comprises the steps of separating a low-oxygen biomass-derived pyrolysis oil effluent into a low-oxygen-pyoil organic phase stream and an aqueous phase stream. Phenolic compounds are removed from the aqueous phase stream to form a phenolic-rich diluent recycle stream. A biomass-derived pyrolysis oil stream is diluted and heated with the phenolic-rich diluent recycle stream to form a heated diluted pyoil feed stream. The heated diluted pyoil feed stream is contacted with a deoxygenating catalyst in the presence of hydrogen to deoxygenate the heated diluted pyoil feed stream.

Molten salt destruction of energetic waste materials

DOEpatents

Brummond, W.A.; Upadhye, R.S.; Pruneda, C.O.

1995-07-18

A molten salt destruction process is used to treat and destroy energetic waste materials such as high explosives, propellants, and rocket fuels. The energetic material is pre-blended with a solid or fluid diluent in safe proportions to form a fluid fuel mixture. The fuel mixture is rapidly introduced into a high temperature molten salt bath. A stream of molten salt is removed from the vessel and may be recycled as diluent. Additionally, the molten salt stream may be pumped from the reactor, circulated outside the reactor for further processing, and delivered back into the reactor or cooled and circulated to the feed delivery system to further dilute the fuel mixture entering the reactor. 4 figs.

Molten salt destruction of energetic waste materials

DOEpatents

Brummond, William A.; Upadhye, Ravindra S.; Pruneda, Cesar O.

1995-01-01

A molten salt destruction process is used to treat and destroy energetic waste materials such as high explosives, propellants, and rocket fuels. The energetic material is pre-blended with a solid or fluid diluent in safe proportions to form a fluid fuel mixture. The fuel mixture is rapidly introduced into a high temperature molten salt bath. A stream of molten salt is removed from the vessel and may be recycled as diluent. Additionally, the molten salt stream may be pumped from the reactor, circulated outside the reactor for further processing, and delivered back into the reactor or cooled and circulated to the feed delivery system to further dilute the fuel mixture entering the reactor.

Sensitization to reactive diluents and hardeners in epoxy resin systems. IVDK data 2002-2011. Part II: concomitant reactions.

PubMed

Geier, Johannes; Lessmann, Holger; Hillen, Uwe; Skudlik, Christoph; Jappe, Uta

2016-02-01

Beside the basic resins, reactive diluents and hardeners are important sensitizers in epoxy resin systems (ERSs). Because of chemical similarities, immunological cross-reactivity may occur. To analyse concomitant reactivity among reactive diluents and hardeners in the patients concerned, as one integral part of a research project on the sensitizing capacity of ERSs (FP-0324). A retrospective analysis of data from the Information Network of Departments of Dermatology (IVDK), 2002-2011, was performed. There was close concomitant reactivity to 1,6-hexanediol diglycidyl ether and 1,4-butanediol diglycidyl ether (1,4-BDDGE), and to phenyl glycidyl ether (PGE) and cresyl glycidyl ether (CGE), whereas reactions to p-tert-butylphenyl glycidyl ether occurred more independently from those to PGE and CGE. Concomitant reactions to butyl glycidyl ether and 1,4-BDDGE may point to a common allergenic compound derived from the metabolism of 1,4-BDDGE. Among the structurally more diverse group of hardeners, there was no evidence of immunological cross-reactions. More detailed knowledge of cross-reactivity among ERS components facilitates the interpretation of patch test results and will allow safer ERSs to be composed in the future. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Experimental study of tensile strength of pharmaceutical tablets: effect of the diluent nature and compression pressure

NASA Astrophysics Data System (ADS)

Juban, Audrey; Briançon, Stéphanie; Puel, François; Hoc, Thierry; Nouguier-Lehon, Cécile

2017-06-01

In the pharmaceutical field, tablets are the most common dosage form for oral administration in the world. Among different manufacturing processes, direct compression is widely used because of its economics interest and it is a process which avoids the steps of wet granulation and drying processes. Tablets are composed of at least two ingredients: an active pharmaceutical ingredient (API) which is mixed with a diluent. The nature of the powders and the processing conditions are crucial for the properties of the blend and, consequently, strongly influence the mechanical characteristics of tablets. Moreover, tablets have to present a suitable mechanical strength to avoid crumbling or breaking when handling, while ensuring an appropriate disintegration after administration. Accordingly, this mechanical property is an essential parameter to consider. Experimental results showed that proportion of the diluent, fragmentary (DCPA) or plastic (MCC), had a large influence on the tensile strength evolution with API content as well as the compression load applied during tableting process. From these results a model was developed in order to predict the tensile strength of binary tablets by knowing the compression pressure. The validity of this model was demonstrated for the two studied systems and a comparison was made with two existing models.

Stereospecific distribution of plamitic acid in the triacylglycerols of rat adipocytes. Effects of varying the composition of the substrate fatty acid in vitro

PubMed Central

Christie, William W.; Hunter, Margaret L.

1980-01-01

The effects of inclusion of different fatty acids in the medium on the rate of esterification of palmitic acid and its stereospecific distribution among the three positions of the triacyl-sn-glycerols by preparations of rat adipocytes in vitro have been determined. Myristic acid, stearic acid, oleic acid and linoleic acid were used as diluents and the concentration of the combined unesterified fatty acids in the medium was held constant; only the proportion of palmitic acid was varied. The amount of palmitic acid esterified was always linearly related to its relative concentration in the medium and was not significantly affected by the nature of the diluent fatty acid chosen. Constant relative proportions were recovered in triacylglycerols and in intermediates in each instance. The amount of palmitic acid esterified to each of the positions of the triacyl-sn-glycerols was linearly dependent on the relative proportion in the medium but the nature of the relationship was markedly influenced by which fatty acid was present. When stearic acid was present, simple relationships were found over the whole range tested. When either myristic acid, oleic acid or linoleic acid was present, abrupt changes in the manner of esterification of palmitic acid were observed in position sn-1 when the relative concentrations of palmitic acid and the diluent reached critical values, which differed with each fatty acid. In position sn-2 when oleic acid or linoleic acid was present, a similar change was observed, and in position sn-3 it was obtained with myristic acid as diluent. The results are discussed in terms of changes in the relative affinities of the acyltransferases for palmitic acid. Palmitic acid was esterified into various molecular species in proportions that indicated acylation with non-correlative specificity at higher relative concentrations but not at lower. PMID:7236215

Design, Synthesis, and Self-Assembly of Polymers with Tailored Graft Distributions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, Alice B.; Lin, Tzu-Pin; Thompson, Niklas B.

Grafting density and graft distribution impact the chain dimensions and physical properties of polymers. However, achieving precise control over these structural parameters presents long-standing synthetic challenges. In this report, we introduce a versatile strategy to synthesize polymers with tailored architectures via grafting-through ring-opening metathesis polymerization (ROMP). One-pot copolymerization of an ω-norbornenyl macromonomer and a discrete norbornenyl co-monomer (diluent) provides opportunities to control the backbone sequence and therefore the side chain distribution. Toward sequence control, the homopolymerization kinetics of 23 diluents were studied, representing diverse variations in the stereochemistry, anchor groups, and substituents. These modifications tuned the homopolymerization rate constants overmore » two orders of magnitude (0.36 M -1 s -1 < k homo < 82 M -1 s -1). Rate trends were identified and elucidated by complementary mechanistic and density functional theory (DFT) studies. Building on this foundation, complex architectures were achieved through copolymerizations of selected diluents with a poly (D,L-lactide) (PLA), polydimethylsiloxane (PDMS), or polystyrene (PS) macromonomer. The cross-propagation rate constants were obtained by non-linear least squares fitting of the instantaneous co-monomer concentrations according to the Mayo-Lewis terminal model. Indepth kinetic analyses indicate a wide range of accessible macromonomer/diluent reactivity ratios (0.08 < r 1/r 2 < 20), corresponding to blocky, gradient, or random backbone sequences. We further demonstrated the versatility of this copolymerization approach by synthesizing AB graft diblock polymers with tapered, uniform, and inverse-tapered molecular “shapes.” Small-angle X-ray scattering analysis of the self-assembled structures illustrates effects of the graft distribution on the domain spacing and backbone conformation. Collectively, the insights provided herein into the ROMP mechanism, monomer design, and homo- and copolymerization rate trends offer a general strategy for the design and synthesis of graft polymers with arbitrary architectures. Controlled copolymerization therefore expands the parameter space for molecular and materials design.« less

Design, Synthesis, and Self-Assembly of Polymers with Tailored Graft Distributions.

PubMed

Chang, Alice B; Lin, Tzu-Pin; Thompson, Niklas B; Luo, Shao-Xiong; Liberman-Martin, Allegra L; Chen, Hsiang-Yun; Lee, Byeongdu; Grubbs, Robert H

2017-12-06

Grafting density and graft distribution impact the chain dimensions and physical properties of polymers. However, achieving precise control over these structural parameters presents long-standing synthetic challenges. In this report, we introduce a versatile strategy to synthesize polymers with tailored architectures via grafting-through ring-opening metathesis polymerization (ROMP). One-pot copolymerization of an ω-norbornenyl macromonomer and a discrete norbornenyl comonomer (diluent) provides opportunities to control the backbone sequence and therefore the side chain distribution. Toward sequence control, the homopolymerization kinetics of 23 diluents were studied, representing diverse variations in the stereochemistry, anchor groups, and substituents. These modifications tuned the homopolymerization rate constants over 2 orders of magnitude (0.36 M -1 s -1 < k homo < 82 M -1 s -1 ). Rate trends were identified and elucidated by complementary mechanistic and density functional theory (DFT) studies. Building on this foundation, complex architectures were achieved through copolymerizations of selected diluents with a poly(d,l-lactide) (PLA), polydimethylsiloxane (PDMS), or polystyrene (PS) macromonomer. The cross-propagation rate constants were obtained by nonlinear least-squares fitting of the instantaneous comonomer concentrations according to the Mayo-Lewis terminal model. In-depth kinetic analyses indicate a wide range of accessible macromonomer/diluent reactivity ratios (0.08 < r 1 /r 2 < 20), corresponding to blocky, gradient, or random backbone sequences. We further demonstrated the versatility of this copolymerization approach by synthesizing AB graft diblock polymers with tapered, uniform, and inverse-tapered molecular "shapes." Small-angle X-ray scattering analysis of the self-assembled structures illustrates effects of the graft distribution on the domain spacing and backbone conformation. Collectively, the insights provided herein into the ROMP mechanism, monomer design, and homo- and copolymerization rate trends offer a general strategy for the design and synthesis of graft polymers with arbitrary architectures. Controlled copolymerization therefore expands the parameter space for molecular and materials design.

Method for extracting lanthanides and actinides from acid solutions by modification of Purex solvent

DOEpatents

Horwitz, E.P.; Kalina, D.G.

1986-03-04

A process is described for the recovery of actinide and lanthanide values from aqueous solutions with an extraction solution containing an organic extractant having the formula as shown in a diagram where [phi] is phenyl, R[sup 1] is a straight or branched alkyl or alkoxyalkyl containing from 6 to 12 carbon atoms and R[sup 2] is an alkyl containing from 3 to 6 carbon atoms and phase modifiers in a water-immiscible hydrocarbon diluent. The addition of the extractant to the Purex process extractant, tri-n-butylphosphate in normal paraffin hydrocarbon diluent, will permit the extraction of multivalent lanthanide and actinide values from 0.1 to 12.0 molar acid solutions. 6 figs.

ANALYSIS OF OUT OF DATE MCU MODIFIER LOCATED IN SRNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crawford, C.

2014-10-22

SRNL recently completed density measurements and chemical analyses on modifier samples stored in drums within SRNL. The modifier samples date back to 2008 and are in various quantities up to 40 gallons. Vendor information on the original samples indicates a shelf life of 5 years. There is interest in determining if samples that have been stored for more than the 5 year shelf life are still acceptable for use. The Modular Caustic Side Solvent Extraction Unit (MCU) Solvent component Cs-7SB [(2,2,3,3- tetraflouropropoxy)-3-(4-sec-butylphenoxy)-2-propanol, CAS #308362-88-1] is used as a diluent modifier to increase extractant solubility and provide physical characteristics necessary formore » diluent trimming.« less

The Chemistry of Separations Ligand Degradation by Organic Radical Cations

DOE PAGES

Mezyk, Stephen P.; Horne, Gregory P.; Mincher, Bruce J.; ...

2016-12-01

Solvent based extractions of used nuclear fuel use designer ligands in an organic phase extracting ligand complexed metal ions from an acidic aqueous phase. These extractions will be performed in highly radioactive environments, and the radiation chemistry of all these complexants and their diluents will play a major role in determining extraction efficiency, separation factors, and solvent-recycle longevity. Although there has been considerable effort in investigating ligand damage occurring in acidic water radiolysis conditions, only minimal fundamental kinetic and mechanistic data has been reported for the degradation of extraction ligands in the organic phase. Extraction solvent phases typically use normalmore » alkanes such as dodecane, TPH, and kerosene as diluents. The radiolysis of such diluents produce a mixture of radical cations (R •+), carbon-centered radicals (R •), solvated electrons, and molecular products such as hydrogen. Typically, the radical species will preferentially react with the dissolved oxygen present to produce relatively inert peroxyl radicals. This isolates the alkane radical cation species, R •+ as the major radiolytically-induced organic species that can react with, and degrade, extraction agents in this phase. Here we report on our recent studies of organic radical cation reactions with various ligands. Elucidating these parameters, and combining them with the known acidic aqueous phase chemistry, will allow a full, fundamental, understanding of the impact of radiation on solvent extraction based separation processes to be achieved.« less

The Chemistry of Separations Ligand Degradation by Organic Radical Cations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mezyk, Stephen P.; Horne, Gregory P.; Mincher, Bruce J.

Solvent based extractions of used nuclear fuel use designer ligands in an organic phase extracting ligand complexed metal ions from an acidic aqueous phase. These extractions will be performed in highly radioactive environments, and the radiation chemistry of all these complexants and their diluents will play a major role in determining extraction efficiency, separation factors, and solvent-recycle longevity. Although there has been considerable effort in investigating ligand damage occurring in acidic water radiolysis conditions, only minimal fundamental kinetic and mechanistic data has been reported for the degradation of extraction ligands in the organic phase. Extraction solvent phases typically use normalmore » alkanes such as dodecane, TPH, and kerosene as diluents. The radiolysis of such diluents produce a mixture of radical cations (R •+), carbon-centered radicals (R •), solvated electrons, and molecular products such as hydrogen. Typically, the radical species will preferentially react with the dissolved oxygen present to produce relatively inert peroxyl radicals. This isolates the alkane radical cation species, R •+ as the major radiolytically-induced organic species that can react with, and degrade, extraction agents in this phase. Here we report on our recent studies of organic radical cation reactions with various ligands. Elucidating these parameters, and combining them with the known acidic aqueous phase chemistry, will allow a full, fundamental, understanding of the impact of radiation on solvent extraction based separation processes to be achieved.« less

Surface Dilution Kinetics Using Substrate Analog-Enantiomers as Diluents: Enzymatic Lipolysis by Bee-Venom Phospholipase A2

PubMed Central

Singh, Jasmeet; Ranganathan, Radha; Hajdu, Joseph

2010-01-01

A novel assay employing D-enantiomers of phospholipids as diluents for characterizing surface kinetics of lipid hydrolysis by phospholipases is introduced. The rationale of the method are: (i) D-enantiomers resist hydrolysis because of the stereoselectivity of the enzymes toward L-enantiomers and (ii) mixtures of L+D-lipids at various L:D ratios but constant L+D-lipid concentrations yield a surface dilution series of variable L-lipid concentration with constant medium properties. Kinetic characterization of bee-venom phospholipase A2 activity at bile salt + phospholipid aggregate-water interfaces was performed using the mixed L+D-lipid surface dilution assay and interface kinetic parameters were obtained. The assay applies to bio-membrane models as well. Activity was measured by pH-Stat methods. Aggregation numbers and interface hydration/microviscosity measured by time resolved fluorescence quenching and electron spin resonance respectively confirmed that interface properties were indeed invariant in a surface dilution series, supporting rationale (ii) and were used to calculate substrate concentrations. Activity data show excellent agreement with a kinetic model derived with D-enantiomers as diluents and also that D-phospholipids bind to the enzyme but resist hydrolysis; underscoring rationale (i). The assay is significant to enabling determination of interface specific kinetic parameters for the first time and thereby characterization of interface specificity of lipolytic enzymes. PMID:20727845

Teduglutide Injection

MedlinePlus

... the medication should read the manufacturer's directions for mixing and injecting the medication before you use it ... Teduglutide must be used within 3 hours after mixing teduglutide powder with the diluent.You can inject ...

Coal liquefaction process wherein jet fuel, diesel fuel and/or ASTM No. 2 fuel oil is recovered

DOEpatents

Bauman, Richard F.; Ryan, Daniel F.

1982-01-01

An improved process for the liquefaction of coal and similar solid carbonaceous materials wherein a hydrogen donor solvent or diluent derived from the solid carbonaceous material is used to form a slurry of the solid carbonaceous material and wherein the naphthenic components from the solvent or diluent fraction are separated and used as jet fuel components. The extraction increases the relative concentration of hydroaromatic (hydrogen donor) components and as a result reduces the gas yield during liquefaction and decreases hydrogen consumption during said liquefaction. The hydrogenation severity can be controlled to increase the yield of naphthenic components and hence the yield of jet fuel and in a preferred embodiment jet fuel yield is maximized while at the same time maintaining solvent balance.

Gradient, contact-free volume transfers minimize compound loss in dose-response experiments.

PubMed

Harris, David; Olechno, Joe; Datwani, Sammy; Ellson, Richard

2010-01-01

More accurate dose-response curves can be constructed by eliminating aqueous serial dilution of compounds. Traditional serial dilutions that use aqueous diluents can result in errors in dose-response values of up to 4 orders of magnitude for a significant percentage of a compound library. When DMSO is used as the diluent, the errors are reduced but not eliminated. The authors use acoustic drop ejection (ADE) to transfer different volumes of model library compounds, directly creating a concentration gradient series in the receiver assay plate. Sample losses and contamination associated with compound handling are therefore avoided or minimized, particularly in the case of less water-soluble compounds. ADE is particularly well suited for assay miniaturization, but gradient volume dispensing is not limited to miniaturized applications.

The shock sensitivities of nitromethane/methanol mixtures

NASA Astrophysics Data System (ADS)

Dattelbaum, D. M.; Sheffield, S. A.; Bartram, B. D.; Gibson, L. L.; Bowden, P. R.; Schilling, B. F.

2014-05-01

Dilution of liquid explosives with "inert" solvents have been shown previously to affect a degradation in the detonation performance properties of the explosive, and result in a rapid increase in the critical diameter with increasing diluent. To date, the shock sensitivities of liquid explosive-diluent mixtures have not been measured. In this work, we describe the results of a series of gas gun-driven plate impact experiments on nitromethane (NM)-methanol (MeOH) solutions of several concentrations, using in situ electromagnetic gauging to measure the initial shock state (Hugoniot) of the mixture, as well as the overtake-time-to-detonation (Pop-plot). Surprisingly, the shock sensitivities did not fall off dramatically with increasing MeOH concentration. In fact, at some concentrations MeOH appears to sensitize NM, relative to neat NM.

A comparison of semen diluents on the in vitro and in vivo fertility of liquid bull semen.

PubMed

Murphy, Edel M; Murphy, Craig; O'Meara, Ciara; Dunne, Gemma; Eivers, Bernard; Lonergan, Patrick; Fair, Sean

2017-02-01

The aim of this study was to assess the effect of semen diluent on calving rate (CR) following artificial insemination with liquid bull semen stored for up to 3 d postcollection. In experiment 1, the effect of storing liquid semen maintained at a constant ambient temperature in 1 of 7 different diluents [Caprogen (homemade), OptiXcell, BioXcell, BullXcell, INRA96, NutriXcell, or AndroMed (all commercially available)] on total and progressive motility was assessed on d 0, 1, 2, and 3 postcollection. In experiment 2, the field fertility of liquid semen diluted in Caprogen, BioXcell, or INRA96 and inseminated on d 1, 2, or 3 postcollection was assessed in comparison to frozen-thawed semen (total of n = 19,126 inseminations). In experiment 3, the effect of storage temperature fluctuations (4 and 18°C) on total and progressive motility following dilution in Caprogen, BioXcell, and INRA96 was assessed on d 0, 1, 2, and 3 postcollection. In experiment 1, semen stored in Caprogen, BioXcell, and INRA96 resulted in the highest total and progressive motility on d 1, 2, and 3 of storage compared with OptiXcell, BullXcell, NutriXcell, and AndroMed. In experiment 2, an effect of diluent on CR was found as semen diluted in BioXcell had a lower CR on d 1, 2, and 3 of storage (46.3, 35.4, and 34.0%, respectively) in comparison with Caprogen (55.8, 52.0, and 51.9%, respectively), INRA96 (55.0, 55.1, and 52.2%, respectively), and frozen-thawed semen (59.7%). Effects were found of parity, cow fertility sub-index, as well as the number of days in milk on CR. In experiment 3, when the storage temperature of diluted semen fluctuated between 4 and 18°C, to mimic what occurs in the field (nighttime vs. daytime), BioXcell had the lowest total and progressive motility in comparison to Caprogen and INRA96. In conclusion, diluent significantly affected sperm motility when stored for up to 3 d. Semen diluted in INRA96 resulted in a similar CR to semen diluted in Caprogen and to frozen-thawed semen, whereas that diluted in BioXcell resulted in a decreased CR. Consistent with this finding, semen diluted in BioXcell was less tolerant of temperature fluctuations than that stored in Caprogen or INRA96. Given that it can be used directly off the shelf, INRA96 may be a suitable alternative to Caprogen for the storage of liquid bull semen. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

40 CFR 156.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... following terms shall have the meanings set forth below. Dilutable means that the pesticide product's labeling allows or requires the pesticide product to be mixed with a liquid diluent prior to application or...

A Preliminary Investigation of the E-Beam Induced Polymerization of Maleimide and Norbornene End-capped Polyimides

NASA Technical Reports Server (NTRS)

Palmese, Giuseppe R.; Meador, Michael A. (Technical Monitor)

2005-01-01

A research area of high activity in connection with aerospace engineering has been the development of polymer thermosetting resins that can resist temperature as high as 300 C while maintaining adequate toughness, and providing ease of processing to enable low temperature and low cost composite fabrication methods. In order to meet such requirements, sequential interpenetrating polymer networks (IPNs) based on bismaleimide (BMI) and cyanate ester (CE) monomers were investigated. In these systems, a polycyanurate network is first formed in the presence of BMI and appropriate reactive diluent monomers and in a second step, a network based on the BMI is created in the presence of a fully formed polycyanurate network. The materials developed can be processed at relatively low temperature (less than 150 C) and with the aid of electron beam (EB) curing. Of major importance to the success of this work was the identification of a reactive diluent that improves ease of processing and has tailored reactivity to allow for the controlled synthesis of CE-BMI sequential IPNs. Based on solubility and reactivity of a number of reactive diluents, N-acryloylmorpholine (AMP) was selected as a comonomer for BMI copolymerization. A donor-acceptoreaction mechanism was suggested to explain the relative reactivity of a variety of reactive diluents towards maleimide functionality. The optimum processing parameters for the formation of the first network were determined through the study of metal catalyzed cure and hydrolysis of cyanate esters, whereas the reaction behavior for second network formation in terms of the influence of EB dose rate and temperature was elucidated through an in-situ kinetics study of maleimide and AMP copolymerization. Structure-property relationships were developed which allowed for the design of improved resin systems. In particular, appropriate network coupler possessing cyanate ester and maleimide functionality was synthesized to link the polycyanurate first network to the BMI/AMP second network and thus form linked sequential IPNs (LIPNs). Consequently, Tg as high as 370 C was achieved and a fracture toughness of 120 Joules per square meters was obtained for resin systems that possess adequately low viscosity for processing using liquid molding techniques at low temperature.

Effects of coccidiosis vaccination administered by in ovo injection on Ross 708 broiler performance through 14 days of post-hatch age.

PubMed

Sokale, A O; Zhai, W; Pote, L M; Williams, C J; Peebles, E D

2017-08-01

Effects of the in ovo injection of a commercial coccidiosis vaccine on various hatching chick quality variables and 14 d post-hatch (dph) oocyst shedding have been previously examined. The current study was designed to examine the performance of Ross 708 broilers during the 14 dph period of oocyst shedding following the application of the coccidiosis vaccine. On each of 7 replicate tray levels of a single-stage incubator, a total of 4 treatment groups was randomly represented, with each treatment group containing 63 eggs. Treatments were administered using a commercial multi-egg injector on d 18.5 of incubation. The treatments included 3 control groups (non-injected, dry-punch, and diluent-injected) and one treatment group (injected with diluent containing Inovocox EM1 vaccine). On d 21 of incubation, 20 chicks from each of the 28 treatment-replicate groups were placed in corresponding wire-floored battery cages. Mortality, feed intake (FI), BW gain (BWG), and feed conversion ratio (FCR) were determined for the zero to 7, 7 to 14, and cumulative zero to 14 dph intervals. There were no significant treatment effects on mortality in any interval or on BW at zero dph. There were significant treatment effects on BW at 7 and 14 dph, on BWG and FI in the zero to 7, 7 to 14, and zero to 14 dph intervals, and on FCR in the 7 to 14 and zero to 14 dph intervals. Although the performance variables of birds belonging to the diluent-injected and vaccine-injected groups were not significantly different, the 14 dph BW, 7 to 14 dph FI, and zero to 14 dph BWG and FI of birds belonging to the vaccine treatment group were significantly higher than those in birds belonging to the non-injected control group. It was concluded that use of the Inovocox EM1 vaccine in commercial diluent has no detrimental effect on the overall post-hatch performance of broilers through 14 dph. © 2017 Poultry Science Association Inc.

Bismaleimide and cyanate ester based sequential interpenetrating polymer networks for high temperature application

NASA Astrophysics Data System (ADS)

Geng, Xing

2005-07-01

A research area of high activity in connection with aerospace engineering has been the development of polymer thermosetting resins that can withstand temperature as high as 300°C while maintaining adequate toughness and providing ease of processing to enable low temperature and low cost composite fabrication methods. In order to meet such requirements, sequential interpenetrating polymer networks (IPNs) based on bismaleimide (BMI) and cyanate ester (CE) monomers were investigated. In these systems, a polycyanurate network is first formed in the presence of BMI and appropriate reactive diluent monomers and, in a second step, a network based on the BMI is created in the presence of a fully formed polycyanurate network. The materials developed can be processed at relatively low temperature (<150°C) and with the aid of electron beam (EB) curing. Of major importance to the success of this work was the identification of a reactive diluent that improves ease of processing and has tailored reactivity to allow for the controlled synthesis of CE-BMI sequential IPNs. Based on solubility and reactivity of a number of reactive diluents, N-acryloylmorpholine (AMP) was selected as a co-monomer for BMI copolymerization. A donor-acceptor reaction mechanism was suggested to explain the relative reactivity of a variety of reactive diluents towards maleimide functionality. The optimum processing parameters for the formation of the first network were determined through the study of metal catalyzed cure and hydrolysis of cyanate esters, whereas the reaction behavior for second network formation in terms of the influence of EB dose rate and temperature was elucidated through an in-situ kinetics study of maleimide and AMP copolymerization. Structure-property relationships were developed which allowed for the design of improved resin systems. In particular, an appropriate network coupler possessing cyanate ester and maleimide functionality was synthesized to link the polycyanurate first network to the BMI/AMP second network and thus form linked sequential IPNs (LIPNs). Consequently, Tg as high as 370°C was achieved and a fracture toughness of 120 J/m2 was obtained for resin systems that possess adequately low viscosity for processing using liquid molding techniques at low temperature.

Reliability of high-strain ionomeric polymer transducers fabricated using the novel direct assembly process

NASA Astrophysics Data System (ADS)

Akle, Barbar; Nawshin, Saila; Leo, Donald

2006-03-01

Ionomeric polymer transducers have received considerable attention in the past several years. These actuators, sometimes referred to as artificial muscles, have the ability to generate large bending strain and moderate stress at low applied voltages. Typically, ionic polymer actuators are composed of Nafion-117 membranes with platinum electrodes and are saturated with water diluents. Recently the authors have developed a novel fabrication technique named the Direct Assembly Process (DAP), which allowed good control on electrode morphology and composition. The DAP consists of spraying two high surface area metal-ionomer electrodes on a Nafion membrane. A single- walled carbon nanotubes (SWNT) and ruthenium dioxide (RuO II) hybrid electrode was sprayed on a Formamide hydrated Nafion-117 membrane using the DAP method. This transducer was shown to generate 9.4% peak-peak strain under the application of +/-2V at a strain rate of 1%/sec. Furthermore using the DAP one is capable of incorporating several types of diluents in ionomeric polymer transducers. Transducers with ionic liquid diluents are demonstrated to operate in air for long periods of time. In this work we will present a reliability study of transducers fabricated using the DAP. Each transducer is tested under a frequency range of 0.2Hz to 1Hz, and a potential of +/-1V to +/-3V. Water hydrated transducers dehydrates and stop moving within 5 minutes while operating in air under +/-2V. Transducers with Formamide diluents operate for 20,000 cycles under +/-1.5V and 0.5Hz (around 11hrs), while they degrade in less than 3000 cycles under +/-2V and 0.5Hz. Ionic liquid based transducers are demonstrated to operate in air for over 400,000 with little loss in performance, and over 1 million cycle with a loss of only 43%. Actuators with several electrode compositions are fabricated and a correlation between the reliability of ionic liquid-ionic polymer transducers and maximum strain will be presented. This correlation will be used to assess the adhesion between the high surface area electrodes and the Nafion membrane. SEM images of tested transducers will be presented.

Lignin-based monomers: Utilization in high-performance polymers and the effects of their structures on polymer properties

NASA Astrophysics Data System (ADS)

Stanzione, Joseph F., III

With the uncertainty of petroleum reserves and future crude oil prices, lignocellulosic biomass is becoming an increasingly valuable resource for the sustainable development of fuels, chemicals, and materials, including vinyl ester resins (VERs). Petroleum-based VERs are used to produce polymer composites for a wide variety of commercial applications. Although possessing relatively high moduli, strengths, and glass transition temperatures, commercial VERs typically contain high concentrations of a reactive diluent, such as styrene. However, these reactive diluents are often considered hazardous air pollutants (HAPs), volatile organic compounds (VOCs), and anticipated carcinogens. Moreover, bisphenol-A, which has gained considerable attention due to potential associated health-related issues, is utilized as a precursor in the synthesis of VERs. A green chemistry and engineering approach in the development of new VERs and renewable reactive diluents that are based on lignin is presented in this dissertation. Lignin, which is currently an abundant, renewable waste product of the paper and pulping industry, is primarily burned as a low value fuel. However, lignin has the potential to be a low cost feedstock in future lignocellulosic biorefineries that could yield highly valuable aromatic chemicals (lignin model compounds, LMCs) when strategically depolymerized. The incorporation of aromaticity in a resin's chemical structure is known to improve overall polymer composite performance and the high aromatic content found in lignin is ideal for novel resin development. Highlighted in this dissertation are three projects: (1) the synthesis and characterization of a lignin-based bio-oil resin/reactive diluent, (2) the use of functionalized LMCs as styrene replacements in VERs, and (3) the synthesis and characterization of a vanillin-based resin. Through the use of traditional and new polymer theory coupled with spectroscopic, thermal, and mechanical techniques, structure-property relationships are identified and related to polymer performance. These findings have important implications for the optimization and design of polymer composites that are based on sustainable resources and processes, are petroleum-independent, and have reduced toxicity with beneficial environmental impacts. In addition, these findings provide the incentive for continued investment in using lignin as a respected materials' feedstock. Lastly, several lignin-related research opportunities of scientific and commercial interest are recommended.

SRS-lidar for 13C/12C isotops measurements environmental and food

NASA Astrophysics Data System (ADS)

Grishkanich, Alexsandr; Chubchenko, Yan; Elizarov, Valentin; Zhevlakov, Aleksandr; Konopelko, Leonid

2017-09-01

The possibilities of the Raman method of radiocarbon measurements in the field of gas analysis are investigated. With the help of veneer gas mixtures of carbon monoxide, carbon dioxide-12, carbon dioxide-13, methane, formaldehyde, the micrometric characteristics of Raman lidars were found, which in most cases coincided with the claimed ones. When gas mixtures are supplied, the diluent gas in which differs from air, the broadening of the spectral lines associated with the interactions between the particles, the results, to significant errors in the measured concentration. These effects, which negate the advantages of the measurement method, are investigated in the framework of this paper. The results of determining the coefficients for correcting the readings of gas analyzers with the achievement of inaccuracies from various diluent gases, as well as the data of the prototype Raman lidar.

An Embryonic Field of Study: The Aquatic Fate and Toxicity of Diluted Bitumen.

PubMed

Alsaadi, Ftoon; Hodson, Peter V; Langlois, Valerie S

2018-01-01

Canada has experienced a significant increase in the transport of diluted bitumen (dilbit), a predominant oil sands product that combines bitumen with diluents derived from oil-gas condensates and other proprietary compounds. The proportion of diluent and the chemical composition of dilbit vary to meet seasonal transport requirements. While the toxic effects of a variety of crude and refined oils are well-studied, the toxicity of dilbit to aquatic species is less well known. This focused review summarizes dilbit production, chemistry, and the few data on toxicity to aquatic species. These data suggest that un-weathered dilbit would cause effects on fish equivalent to those of conventional oils, but its toxicity may be lower, depending on interactions among test conditions, the behavior of dilbit added to water and the species tested.

Clofazimine drug susceptibility testing for Mycobacterium tuberculosis: the case of using the right diluent.

PubMed

Sng, Li-Hwei; Peh, Justine Woei Ling; Lee Kee, Melody Tai; Ya'akob, Nurhazirah Bte Mohd; Ong, Rick Twee-Hee; Wong, Christopher W; Chee, Cynthia Bin Eng; Wang, Yee Tang

2018-06-08

Accurate and reliable drug susceptibility testing (DST) is essential for the effective treatment and control of tuberculosis. With the increase in drug-resistant organisms, newer and less conventional antimicrobial agents are used for treatment. Recently, we found an unprecedented rise in the number of clofazimine-resistant Mycobacterium tuberculosis isolates in our laboratory. An investigation found that this phenomenon was due to a change in the method of drug preparation. We performed studies to assess the impact of water and dimethyl sulfoxide (DMSO) as a final diluent for clofazimine drug testing. Based on our findings, the use of DMSO as a solvent for M. tuberculosis DST was optimised using the BACTEC MGIT 960 platform. Copyright © 2018 Royal College of Pathologists of Australasia. Published by Elsevier B.V. All rights reserved.

Rapid Reconstitution Packages (RRPs) implemented by integration of computational fluid dynamics (CFD) and 3D printed microfluidics.

PubMed

Chi, Albert; Curi, Sebastian; Clayton, Kevin; Luciano, David; Klauber, Kameron; Alexander-Katz, Alfredo; D'hers, Sebastian; Elman, Noel M

2014-08-01

Rapid Reconstitution Packages (RRPs) are portable platforms that integrate microfluidics for rapid reconstitution of lyophilized drugs. Rapid reconstitution of lyophilized drugs using standard vials and syringes is an error-prone process. RRPs were designed using computational fluid dynamics (CFD) techniques to optimize fluidic structures for rapid mixing and integrating physical properties of targeted drugs and diluents. Devices were manufactured using stereo lithography 3D printing for micrometer structural precision and rapid prototyping. Tissue plasminogen activator (tPA) was selected as the initial model drug to test the RRPs as it is unstable in solution. tPA is a thrombolytic drug, stored in lyophilized form, required in emergency settings for which rapid reconstitution is of critical importance. RRP performance and drug stability were evaluated by high-performance liquid chromatography (HPLC) to characterize release kinetics. In addition, enzyme-linked immunosorbent assays (ELISAs) were performed to test for drug activity after the RRPs were exposed to various controlled temperature conditions. Experimental results showed that RRPs provided effective reconstitution of tPA that strongly correlated with CFD results. Simulation and experimental results show that release kinetics can be adjusted by tuning the device structural dimensions and diluent drug physical parameters. The design of RRPs can be tailored for a number of applications by taking into account physical parameters of the active pharmaceutical ingredients (APIs), excipients, and diluents. RRPs are portable platforms that can be utilized for reconstitution of emergency drugs in time-critical therapies.

RAT SPERM MOTILITY ANALYSIS: METHODOLOGICAL CONSIDERATIONS

EPA Science Inventory

The objective of these studies was to optimize conditions for computer assisted sperm analysis (CASA) of rat epididymal spermatozoa. ethodological issues addressed include sample collection technique, sampling region within the epididymis, type of diluent medium used, and sample ...

Rat sperm motility analysis: methodologic considerations

EPA Science Inventory

The objective of these studies was to optimize conditions for computer-assisted sperm analysis (CASA) of rat epididymal spermatozoa. Methodologic issues addressed include sample collection technique, sampling region within the epididymis, type of diluent medium used, and sample c...

Comparison of diluents for holding cock semen six hours at 41 C.

PubMed

Howarth, B

1983-06-01

Beltsville Poultry Semen Extender (BPSE) and Lake's Diluent A (LDA) were compared with minimum essential medium (MEM) for their ability to maintain the fertilizing capacity of cock semen held 6 hr at 41 C. Motility significantly declined from the beginning to the end of the holding period for semen in BPSE and LDA. Only in LDA, however, were the number of live spermatozoa significantly reduced. Although there were no differences in oxygen (O2) consumption measured at 1 and 6 hr for semen in BPSE and MEM, a significant reduction in O2 consumption was observed between these time periods for semen in LDA. Fertility of semen held in MEM (90.3%) was significantly higher than the unstored control semen (82.9%) and semen held in either BPSE (3.5%) or LDA (1.9%). No differences in hatchability of fertile eggs were observed between the semen groups.

Recovery of Pyruvic Acid using Tri-n-butylamine Dissolved in Non-Toxic Diluent (Rice Bran Oil)

NASA Astrophysics Data System (ADS)

Pal, Dharm; Keshav, Amit

2016-04-01

An attempt has been made to investigate the effectiveness of the vegetable oil based biocompatible solvent for the separation of pyruvic acid from fermentation broth, by using rice bran oil as natural, non-toxic diluent. Reactive extraction of pyruvic acid (0.1-0.5 k mol/m3) from aqueous solutions has been studied using tri-n-butylamine (TBA; 10-70 %) as an extractant dissolved in non toxic rice bran oil at T = 30 ± 1 °C. Results were presented in terms of distribution coefficient (Kd), extraction efficiency (E %), loading ratio (Z), and complexation constant (\\varphi_{α β }). Extraction equilibrium was interpreted using mass action modeling approach. Based on the extent of loading (Z < 0.5) only (1:1), pyruvic acid: TBA complex was proposed. Equilibrium complexation constant was evaluated to 1.22 m3/k mol. Results obtained are useful in understanding the extraction mechanism.

Reactive extraction of lactic acid with trioctylamine/methylene chloride/n-hexane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Han, D.H.; Hong, W.H.

The trioctylamine (TOA)/methylene chloride (MC)/n-hexane system was used as the extraction agent for the extraction of lactic acid. Curves of equilibrium and hydration were obtained at various temperatures and concentrations of TOA. A modified mass action model was proposed to interpret the equilibrium and the hydration curves. The reaction mechanism and the corresponding parameters which best represent the equilibrium data were estimated, and the concentration of water in the organic phase was predicted by inserting the parameters into the simple mathematical equation of the modified model. The concentration of MC and the change of temperature were important factors for themore » extraction and the stripping process. The stripping was performed by a simple distillation which was a combination of temperature-swing regeneration and diluent-swing regeneration. The type of inactive diluent has no influence on the stripping. The stripping efficiencies were about 70%.« less

Aerobic granular sludge inoculated microbial fuel cells for enhanced epoxy reactive diluent wastewater treatment.

PubMed

Cheng, Kai; Hu, Jingping; Hou, Huijie; Liu, Bingchuan; Chen, Qin; Pan, Keliang; Pu, Wenhong; Yang, Jiakuan; Wu, Xu; Yang, Changzhu

2017-04-01

Microbial consortiums aggregated on the anode surface of microbial fuel cells (MFCs) are critical factors for electricity generation as well as biodegradation efficiencies of organic compounds. Here in this study, aerobic granular sludge (AGS) was assembled on the surface of the MFC anode to form an AGS-MFC system with superior performance on epoxy reactive diluent (ERD) wastewater treatment. AGS-MFCs successfully shortened the startup time from 13d to 7d compared to the ones inoculated with domestic wastewater. Enhanced toxicity tolerance as well as higher COD removal (77.8% vs. 63.6%) were achieved. The higher ERD wastewater treatment efficiency of AGS-MFC is possibly attributed to the diverse microbial population on MFC biofilm, as well as the synergic degradation of contaminants by both the MFC anode biofilm and AGS granules. Copyright © 2017 Elsevier Ltd. All rights reserved.

The propulsive capability of explosives heavily loaded with inert materials

NASA Astrophysics Data System (ADS)

Loiseau, J.; Georges, W.; Frost, D. L.; Higgins, A. J.

2018-01-01

The effect of inert dilution on the accelerating ability of high explosives for both grazing and normal detonations was studied. The explosives considered were: (1) neat, amine-sensitized nitromethane (NM), (2) packed beds of glass, steel, or tungsten particles saturated with amine-sensitized NM, (3) NM gelled with PMMA containing dispersed glass microballoons, (4) NM gelled with PMMA containing glass microballoons and steel particles, and (5) C-4 containing varying mass fractions of glass or steel particles. Flyer velocity was measured via photonic Doppler velocimetry, and the results were analysed using a Gurney model augmented to include the influence of the diluent. Reduction in accelerating ability with increasing dilution for the amine-sensitized NM, gelled NM, and C-4 was measured experimentally. Variation of flyer terminal velocity with the ratio of flyer mass to charge mass (M/C) was measured for both grazing and normally incident detonations in gelled NM containing 10% microballoons by mass and for steel beads saturated with amine-sensitized NM. Finally, flyer velocity was measured in grazing versus normal loading for a number of explosive admixtures. The augmented Gurney model predicted the effect of dilution on accelerating ability and the scaling of flyer velocity with M/C for mixtures containing low-density diluents. The augmented Gurney model failed to predict the scaling of flyer velocity with M/C for mixtures heavily loaded with dense diluents. In all cases, normally incident detonations propelled flyers to higher velocity than the equivalent grazing detonations because of material velocity imparted by the incident shock wave and momentum/energy transfer from the slapper used to uniformly initiate the charge.

The propulsive capability of explosives heavily loaded with inert materials

NASA Astrophysics Data System (ADS)

Loiseau, J.; Georges, W.; Frost, D. L.; Higgins, A. J.

2018-07-01

The effect of inert dilution on the accelerating ability of high explosives for both grazing and normal detonations was studied. The explosives considered were: (1) neat, amine-sensitized nitromethane (NM), (2) packed beds of glass, steel, or tungsten particles saturated with amine-sensitized NM, (3) NM gelled with PMMA containing dispersed glass microballoons, (4) NM gelled with PMMA containing glass microballoons and steel particles, and (5) C-4 containing varying mass fractions of glass or steel particles. Flyer velocity was measured via photonic Doppler velocimetry, and the results were analysed using a Gurney model augmented to include the influence of the diluent. Reduction in accelerating ability with increasing dilution for the amine-sensitized NM, gelled NM, and C-4 was measured experimentally. Variation of flyer terminal velocity with the ratio of flyer mass to charge mass ( M/ C) was measured for both grazing and normally incident detonations in gelled NM containing 10% microballoons by mass and for steel beads saturated with amine-sensitized NM. Finally, flyer velocity was measured in grazing versus normal loading for a number of explosive admixtures. The augmented Gurney model predicted the effect of dilution on accelerating ability and the scaling of flyer velocity with M/ C for mixtures containing low-density diluents. The augmented Gurney model failed to predict the scaling of flyer velocity with M/ C for mixtures heavily loaded with dense diluents. In all cases, normally incident detonations propelled flyers to higher velocity than the equivalent grazing detonations because of material velocity imparted by the incident shock wave and momentum/energy transfer from the slapper used to uniformly initiate the charge.

Preservation of mithun (Bos frontalis) semen at refrigeration temperature.

PubMed

Karunakaran, M; Dhali, A; Mech, A; Khate, K; Rajkhowa, C; Mishra, D P

2007-10-01

The objective of the present study was to investigate the possibility of preserving mithun (Bos frontalis) spermatozoa at refrigeration temperature using tris-egg yolk diluent. Semen samples were collected from four adult mithun bulls through rectal massage method. Good quality semen samples (n=30) were preserved at 4 degrees C using tris-egg yolk diluent for 72 h. Progressive motility, live spermatozoa count and morphological abnormalities were evaluated every 12 h until 72 h of preservation. The colour, consistency and mass activity of fresh semen samples were found to be creamy white, medium and 3+ to 4+ (5+ scale), respectively. The average (mean+/-S.E.) volume (ml), pH and spermatozoa concentration (10(6) ml(-1)) of fresh semen samples were found to be 0.6+/-0.01, 6.8+/-0.03 and 425+/-48, respectively. Progressive motility and live spermatozoa count were found to be less than 30% (P<0.01) after 48 h of storage. Head (P<0.05), midpiece (P<0.05), tail (P<0.01) and total (P<0.01) abnormalities were found to be increased significantly over the time of storage. It was observed that progressive motility and live spermatozoa count remained above 30% and 40%, respectively, until 36 h of storage. Simultaneously the percentage of morphologically abnormal spermatozoa was found to be significantly low until 36 h of storage. The results indicate that it is possible to preserve mithun spermatozoa at refrigeration temperature in tris-egg yolk diluent, which can be further used for artificial insemination within 36 h of storage.

Dextrose monohydrate as a non-animal sourced alternative diluent in high shear wet granulation tablet formulations.

PubMed

Mitra, Biplob; Wolfe, Chad; Wu, Sy-Juen

2018-05-01

The feasibility of dextrose monohydrate as a non-animal sourced diluent in high shear wet granulation (HSWG) tablet formulations was determined. Impacts of granulation solution amount and addition time, wet massing time, impeller speed, powder and solution binder, and dry milling speed and screen opening size on granule size, friability and density, and tablet solid fraction (SF) and tensile strength (TS) were evaluated. The stability of theophylline tablets TS, disintegration time (DT) and in vitro dissolution were also studied. Following post-granulation drying at 60 °C, dextrose monohydrate lost 9% water and converted into the anhydrate form. Higher granulation solution amounts and faster addition, faster impeller speeds, and solution binder produced larger, denser and stronger (less friable) granules. All granules were compressed into tablets with acceptable TS. Contrary to what is normally observed, denser and larger granules (at ≥21% water level) produced tablets with a higher TS. The TS of the weakest tablets increased the most after storage at both 25 °C/60% RH and 40 °C/75% RH. Tablet DT was higher for stronger granules and after storage. Tablet dissolution profiles for 21% or less water were comparable and did not change on stability. However, the dissolution profile for tablets prepared with 24% water was slower initially and continued to decrease on stability. The results indicate a granulation water amount of not more than 21% is required to achieve acceptable tablet properties. This study clearly demonstrated the utility of dextrose monohydrate as a non-animal sourced diluent in a HSWG tablet formulation.

21 CFR 74.1339 - D&C Red No. 39.

Code of Federal Regulations, 2014 CFR

2014-04-01

... made with D&C Red No. 39 may contain the following diluents: Water, acetone, isopropyl alcohol, and... matter (at 100 °C.), not more than 2.0 percent. Matter insoluble in acetone, not more than 1.0 percent...

21 CFR 74.1339 - D&C Red No. 39.

Code of Federal Regulations, 2012 CFR

2012-04-01

... made with D&C Red No. 39 may contain the following diluents: Water, acetone, isopropyl alcohol, and... matter (at 100 °C.), not more than 2.0 percent. Matter insoluble in acetone, not more than 1.0 percent...

21 CFR 74.1339 - D&C Red No. 39.

Code of Federal Regulations, 2013 CFR

2013-04-01

... made with D&C Red No. 39 may contain the following diluents: Water, acetone, isopropyl alcohol, and... matter (at 100 °C.), not more than 2.0 percent. Matter insoluble in acetone, not more than 1.0 percent...

Improved Whole-Blood-Staining Device

NASA Technical Reports Server (NTRS)

Sams, Clarence F.; Crucian, Brian; Paul, Bonnie; Melton, Shannon; Guess, Terry

2012-01-01

Dramatic improvements have been made in NASA s Whole Blood Staining Device (WBSD) since it was last described in "Whole-Blood-Staining Device," NASA Tech Briefs, Vol. 23, No. 10 (October 1999), page 64. The new system has a longer shelf life, a simpler and more effective operational procedure, improved interface with instrumentation, and shorter processing time. More specifically, the improvements have targeted bag and locking clip materials, sampling ports, and air pocket prevention. The WBSD stains whole blood collected during spaceflight for subsequent flow cytometric analysis. In short, the main device stains white blood cells by use of monoclonal antibodies conjugated to various fluorochromes, followed by lysing and fixing of the cells by use of a commercial reagent that has been diluted according to NASA safety standards. This system is compact, robust, and does not require electric power, precise mixing, or precise incubation times. Figure 1 depicts the present improved version for staining applications, which is a poly(tetrafluoroethylene) bag with a Luer-lock port and plastic locking clips. An InterLink (or equivalent) intravenous- injection port screws into the Luer-lock port. The inflatable/collapsible nature of the bag facilitates loading and helps to minimize the amount of air trapped in the fully loaded bag. Some additional uses have been identified for the device beyond whole blood staining. The WBSD has been configured for functional assays that require culture of live cells by housing sterile culture media, mitogens, and fixatives prior to use [Figure 2(a)]. Simple injection of whole blood allows cell-stimulation culture to be performed in reduced gravity conditions, and product stabilization prior to storage, while protecting astronauts from liquid biohazardous materials. Also, the improved WBSD has reconstituted powdered injectable antibiotics by mixing them with diluent liquids [Figure 2(b)]. Although such mixing can readily be performed on Earth by shaking in glass vials, it cannot readily be performed this way in outer space without entraining air bubbles. The present device can be preloaded with the powder and diluent(s) in separate compartments. The powder and diluent( s) can be mixed, without introducing air bubbles, by removing the clip(s), then shaking. This use of the device could also be advantageous in terrestrial applications because it maintains the isolation of the constituents until the time of use.

21 CFR 73.2180 - Guaiazulene.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2180 Guaiazulene. (a) Identity. (1) The color additive... cosmetic use may contain the following diluent: Polyethylene glycol-40 castor oil (PEG-40 castor oil... applied cosmetics in amounts consistent with good manufacturing practice. (d) Labeling. The label of the...

21 CFR 73.2180 - Guaiazulene.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2180 Guaiazulene. (a) Identity. (1) The color additive... cosmetic use may contain the following diluent: Polyethylene glycol-40 castor oil (PEG-40 castor oil... applied cosmetics in amounts consistent with good manufacturing practice. (d) Labeling. The label of the...

21 CFR 73.2180 - Guaiazulene.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2180 Guaiazulene. (a) Identity. (1) The color additive... cosmetic use may contain the following diluent: Polyethylene glycol-40 castor oil (PEG-40 castor oil... applied cosmetics in amounts consistent with good manufacturing practice. (d) Labeling. The label of the...

21 CFR 73.2180 - Guaiazulene.

Code of Federal Regulations, 2010 CFR

2010-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2180 Guaiazulene. (a) Identity. (1) The color additive... cosmetic use may contain the following diluent: Polyethylene glycol-40 castor oil (PEG-40 castor oil... applied cosmetics in amounts consistent with good manufacturing practice. (d) Labeling. The label of the...

Liquid-liquid extraction and flat sheet supported liquid membrane studies on Am(III) and Eu(III) separation using 2,6-bis(5,6-dipropyl-1,2,4-triazin-3-yl)pyridine as the extractant.

PubMed

Bhattacharyya, A; Mohapatra, P K; Gadly, T; Raut, D R; Ghosh, S K; Manchanda, V K

2011-11-15

Solvent extraction and supported liquid membrane transport studies for the preferential removal of Am(3+) from feeds containing a mixture of Am(3+) and Eu(3+) was carried out using 2,6-bis(5,6-dipropyl-1,2,4-triazin-3-yl)pyridine (n-Pr-BTP) as the extractant. Diluent plays an important role in these studies. It was observed that the distribution coefficients deteriorate significantly for both Am(3+) and Eu(3+) though the separation factors were affected only marginally. The transport studies were carried out at pH 2.0 in the presence of NaNO(3) to result in the preferential Am(3+) transport with high separation factors. Effect of different experimental parameters, viz. feed composition, stripping agents, diluents of the organic liquid membrane and membrane pore size was studied on the transport and separation behaviour of Am(3+) and Eu(3+). The supported liquid membrane studies indicated about 85% Am(3+) and 6% Eu(3+) transport in 6h using 0.03 M n-Pr-BTP in n-dodecane/1-octanol (7:3) diluent mixture for a feed containing 1M NaNO(3) at pH 2 and a receiver phase containing pH 2 solution as the strippant. Consequently, a permeability coefficient of (1.75 ± 0.21) × 10(-4)cms(-1) was determined for the Am(3+) transport. Stability of the n-Pr-BTP and its SLM was also studied by carrying out the distribution and transport experiment after different time intervals. Copyright © 2011 Elsevier B.V. All rights reserved.

[Application of β-cyclodextrin in the formulation of ODT tablets containing ibuprofen].

PubMed

Zimmer, Łukasz; Kasperek, Regina; Poleszak, Ewa

2014-01-01

Oral disintegrating tablet (ODT) dissolves or disintegrates in saliva and then it is swallowed. Diluent in direct compression formulation has a dual role: it increases bulk of the dosage form and it promotes binding of the constituent particles of the formulation. Hence, selection of diluent is important in tablets produced by direct compression method. The aim of this work was to exame feasibility of preparing and optimizing oral disintegrating tablet formulation using β-cyclodextrin as a diluent. 400 mg round tablets were prepared by direct compression method on single punch tablet press using flat plain-face. 60% β-CD and MCC (microcrystalline cellulose - MCC-Vivapur 102) were used at different proportions for all the formulations. 5% of Kollidon CL was added as superdisintegrant. The eight formulations prepared were assessed for weight variation, thickness, disintegration time, hardness and dissolution rate according to FP IX. A dissolution test was performed at 37ºC using the paddle method at 50 rpm with 900 mL phosphate buffer (pH 6.8) as a dissolution medium. The content of ibuprofen sodium was found inside the ± 5% of the theoretical value. Hardness values of presented tablets were in the range 0.11-0.15 kG/mm2. Friability of the tablets lower than 1% indicates that the developed formulations can be processed and handled without excessive care. Disintegration time was in the range of 86 to 161 s. The results confirm the good mechanical properties of tablets containing β-CD. A composition with 20% β-CD and 40% MCC fulfilled a maximum requisite of an optimum formulation. These properties were similar to Ludiflash, the formulation used for comparison purposes. In the present study, higher concentration of β cyclodextrin was found to improve the hardness of tablets without increasing the disintegration time.

Large-volume injection of sample diluents not miscible with the mobile phase as an alternative approach in sample preparation for bioanalysis: an application for fenspiride bioequivalence.

PubMed

Medvedovici, Andrei; Udrescu, Stefan; Albu, Florin; Tache, Florentin; David, Victor

2011-09-01

Liquid-liquid extraction of target compounds from biological matrices followed by the injection of a large volume from the organic layer into the chromatographic column operated under reversed-phase (RP) conditions would successfully combine the selectivity and the straightforward character of the procedure in order to enhance sensitivity, compared with the usual approach of involving solvent evaporation and residue re-dissolution. Large-volume injection of samples in diluents that are not miscible with the mobile phase was recently introduced in chromatographic practice. The risk of random errors produced during the manipulation of samples is also substantially reduced. A bioanalytical method designed for the bioequivalence of fenspiride containing pharmaceutical formulations was based on a sample preparation procedure involving extraction of the target analyte and the internal standard (trimetazidine) from alkalinized plasma samples in 1-octanol. A volume of 75 µl from the octanol layer was directly injected on a Zorbax SB C18 Rapid Resolution, 50 mm length × 4.6 mm internal diameter × 1.8 µm particle size column, with the RP separation being carried out under gradient elution conditions. Detection was made through positive ESI and MS/MS. Aspects related to method development and validation are discussed. The bioanalytical method was successfully applied to assess bioequivalence of a modified release pharmaceutical formulation containing 80 mg fenspiride hydrochloride during two different studies carried out as single-dose administration under fasting and fed conditions (four arms), and multiple doses administration, respectively. The quality attributes assigned to the bioanalytical method, as resulting from its application to the bioequivalence studies, are highlighted and fully demonstrate that sample preparation based on large-volume injection of immiscible diluents has an increased potential for application in bioanalysis.

Assessing the growth and recovery of Salmonella Enteritidis SE86 after sodium dichloroisocyanurate exposure

PubMed Central

Ferreira, Fernanda Stoduto; Horvath, Mariana Bandeira; Tondo, Eduardo Cesar

2013-01-01

The objective of the present study was to assess the growth and the recovery of Salmonella (S.) Enteritidis SE86 in different diluents, culture media and using different plating methods after the exposure to 200 mg/kg sodium dichloroisocyanurate (NaDCC). Before and after NaDCC exposure, SE86 was cultured at 30 °C and 7 °C in the following diluents: Peptone water (P), Saline solution (SaS), Peptone water+Saline solution (P+SaS), Peptone water+Tween 80+Lecithin+Sodium thiosulfate (P+N) and Saline solution+Tween 80+Lecithin+Sodium thiosulfate (SaS+N). The SaS diluent was chosen because it was able to maintain cells viable without growth and was further used for plating SE86 on non selective medium (Tryptic Soy Agar-TSA) and on selective media (Mannitol Lysine Crystal Violet Brilliant Green Agar-MLCB; Brilliant Green Agar-BGA; Salmonella Shigella Agar-SS and Xylose Lysine Dextrose–XLD). The Thin Agar Layer method (TAL) i.e., selective media overlayed with non selective TSA was also evaluated. Results indicated that SE86 not exposed to NaDCC was able to grow in P, P+N, SaS+N and P+SaS, but not in SaS, that was able to maintain cells viable. SE86 exposed to NaDCC demonstrated similar counts after dilution in SaS and the plating on non selective TSA, selective media MLCB, BGA, SS and XLD and on TAL media. SE86, S. Typhimurium and S. Bredeney, exposed or not exposed to NaDCC, showed no significant differences in counts on TSA, XLD and XLD overlayed with TSA, suggesting that all those media may be used to quantify NaDCC-exposed Salmonella by plating method. PMID:24516446

Role of cellulose ether polymers on ibuprofen release from matrix tablets.

PubMed

Vueba, M L; Batista de Carvalho, L A E; Veiga, F; Sousa, J J; Pina, Maria Eugénia

2005-08-01

Cellulose derivatives are the most frequently used polymers in formulations of pharmaceutical products for controlled drug delivery. The main aim of the present work was to evaluate the effect of different cellulose substitutions on the release rate of ibuprofen (IBP) from hydrophilic matrix tablets. Thus, the release mechanism of IBP with methylcellulose (MC25), hydroxypropylcellulose (HPC), and hydroxypropylmethylcellulose (HPMC K15M or K100M) was studied. In addition, the influence of the diluents lactose monohydrate (LAC) and beta-cyclodextrin (beta-CD) was evaluated. Distinct test formulations were prepared containing: 57.14% of IBP, 20.00% of polymer, 20.29% of diluent, 1.71% of talc lubricants, and 0.86% of magnesium stearate as lubricants. Although non-negligible drug-excipient interactions were detected from DSC studies, these were found not to constitute an incompatibility effect. Tablets were examined for their drug content, weight uniformity, hardness, thickness, tensile strength, friability, porosity, swelling, and dissolution performance. Polymers MC25 and HPC were found to be unsuitable for the preparation of this kind of solid dosage form, while HPMC K15M and K100M showed to be advantageous. Dissolution parameters such as the area under the dissolution curve (AUC), the dissolution efficiency (DE(20 h)), dissolution time (t 50%), and mean dissolution time (MDT) were calculated for all the formulations, and the highest MDT values were obtained with HPMC indicating that a higher value of MDT signifies a higher drug retarding ability of the polymer and vice-versa. The analysis of the drug release data was performed in the light of distinct kinetic mathematical models-Kosmeyer-Peppas, Higuchi, zero-, and first-order. The release process was also found to be slightly influenced by the kind of diluent used.

DEVELOPMENT OF A LOW-COST INFERENTIAL NATURAL GAS ENERGY FLOW RATE PROTOTYPE RETROFIT MODULE

DOE Office of Scientific and Technical Information (OSTI.GOV)

E. Kelner; T.E. Owen; D.L. George

2004-03-01

In 1998, Southwest Research Institute{reg_sign} began a multi-year project co-funded by the Gas Research Institute (GRI) and the U.S. Department of Energy. The project goal is to develop a working prototype instrument module for natural gas energy measurement. The module will be used to retrofit a natural gas custody transfer flow meter for energy measurement, at a cost an order of magnitude lower than a gas chromatograph. Development and evaluation of the prototype retrofit natural gas energy flow meter in 2000-2001 included: (1) evaluation of the inferential gas energy analysis algorithm using supplemental gas databases and anticipated worst-case gas mixtures;more » (2) identification and feasibility review of potential sensing technologies for nitrogen diluent content; (3) experimental performance evaluation of infrared absorption sensors for carbon dioxide diluent content; and (4) procurement of a custom ultrasonic transducer and redesign of the ultrasonic pulse reflection correlation sensor for precision speed-of-sound measurements. A prototype energy meter module containing improved carbon dioxide and speed-of-sound sensors was constructed and tested in the GRI Metering Research Facility at SwRI. Performance of this module using transmission-quality natural gas and gas containing supplemental carbon dioxide up to 9 mol% resulted in gas energy determinations well within the inferential algorithm worst-case tolerance of {+-}2.4 Btu/scf (nitrogen diluent gas measured by gas chromatograph). A two-week field test was performed at a gas-fired power plant to evaluate the inferential algorithm and the data acquisition requirements needed to adapt the prototype energy meter module to practical field site conditions.« less

Method and means for producing fluorocarbon finishes on fibrous structures

NASA Technical Reports Server (NTRS)

Toy, Madeline S. (Inventor); Stringham, Roger S. (Inventor); Fogg, Lawrence C. (Inventor)

1981-01-01

An improved process and apparatus is provided for imparting chemically bonded fluorocarbon finishes to textiles. In the process, the textiles are contacted with a gaseous mixture of fluoroolefins in an inert diluent gas in the presence of ultraviolet light under predetermined conditions.

21 CFR 73.2329 - Guanine.

Code of Federal Regulations, 2010 CFR

2010-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2329 Guanine. (a) Identity and specifications. (1) The color additive guanine shall conform in identity and specifications to the requirements of § 73.1329 (a)(1) and (b). (2) Color additive mixtures of guanine may contain the following diluents: (i) For...

The role of depressed metabolism in space biology: An overview

NASA Technical Reports Server (NTRS)

Saunders, J.

1973-01-01

Organization and research activities of the entire NASA Space Biology Program are outlined. Various technical approaches are reported to study depressed metabolism particularly in the situation of 100% oxygen and reduced ambient pressures. These include hibernation and hypothermia, thermal regulation, and diluent gases.

9 CFR 317.360 - Nutrient content claims for calorie content.

Code of Federal Regulations, 2010 CFR

2010-01-01

... that must be reconstituted before typical consumption with water or a diluent containing an... size; and (ii) If the product meets this condition without the benefit of special processing... without the benefit of special processing, alteration, formulation, or reformulation to lower the caloric...

9 CFR 381.460 - Nutrient content claims for calorie content.

Code of Federal Regulations, 2010 CFR

2010-01-01

... that must be reconstituted before typical consumption with water or a diluent containing an... size; and (ii) If the product meets this condition without the benefit of special processing... without the benefit of special processing, alteration, formulation, or reformulation to lower the caloric...

Nonsurgical Artificial Insemination in the Ewe

USDA-ARS?s Scientific Manuscript database

Artificial insemination (AI) is not readily utilized with sheep because of a lack of knowledge and infrastructure. Therefore, we investigated the effects of the timing of AI with a synchronized estrous on fertility and the impact of cryopreservation diluents on post-thaw sperm quality. The estrous...

21 CFR 73.1550 - Talc.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... (2) Color additive mixtures for drug use made with talc may contain only those diluents listed in this subpart as safe and suitable for use in color additive mixtures for coloring drugs. (b... AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES...

40 CFR 60.51b - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... gases, liquids, or solids through the heating of municipal solid waste, and the gases, liquids, or... diluent gas) for subsequent on-or off-site analysis; integrated sample(s) collected are representative of... arithmetic average flue gas temperature measured at the particulate matter control device inlet during four...

40 CFR 60.51b - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... gases, liquids, or solids through the heating of municipal solid waste, and the gases, liquids, or... diluent gas) for subsequent on-or off-site analysis; integrated sample(s) collected are representative of... arithmetic average flue gas temperature measured at the particulate matter control device inlet during four...

40 CFR 60.51b - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... gases, liquids, or solids through the heating of municipal solid waste, and the gases, liquids, or... diluent gas) for subsequent on-or off-site analysis; integrated sample(s) collected are representative of... arithmetic average flue gas temperature measured at the particulate matter control device inlet during four...

Microfluidic Serial Dilution Circuit

PubMed Central

Paegel, Brian M.; Grover, William H.; Skelley, Alison M.; Mathies, Richard A.; Joyce, Gerald F.

2008-01-01

In vitro evolution of RNA molecules requires a method for executing many consecutive serial dilutions. To solve this problem, a microfluidic circuit has been fabricated in a three-layer glass-PDMS-glass device. The 400-nL serial dilution circuit contains five integrated membrane valves: three two-way valves arranged in a loop to drive cyclic mixing of the diluent and carryover, and two bus valves to control fluidic access to the circuit through input and output channels. By varying the valve placement in the circuit, carryover fractions from 0.04 to 0.2 were obtained. Each dilution process, which is comprised of a diluent flush cycle followed by a mixing cycle, is carried out with no pipeting, and a sample volume of 400 nL is sufficient for conducting an arbitrary number of serial dilutions. Mixing is precisely controlled by changing the cyclic pumping rate, with a minimum mixing time of 22 s. This microfluidic circuit is generally applicable for integrating automated serial dilution and sample preparation in almost any microfluidic architecture. PMID:17073422

Method for control of NOx emission from combustors using fuel dilution

DOEpatents

Schefer, Robert W [Alamo, CA; Keller, Jay O [Oakland, CA

2007-01-16

A method of controlling NOx emission from combustors. The method involves the controlled addition of a diluent such as nitrogen or water vapor, to a base fuel to reduce the flame temperature, thereby reducing NOx production. At the same time, a gas capable of enhancing flame stability and improving low temperature combustion characteristics, such as hydrogen, is added to the fuel mixture. The base fuel can be natural gas for use in industrial and power generation gas turbines and other burners. However, the method described herein is equally applicable to other common fuels such as coal gas, biomass-derived fuels and other common hydrocarbon fuels. The unique combustion characteristics associated with the use of hydrogen, particularly faster flame speed, higher reaction rates, and increased resistance to fluid-mechanical strain, alter the burner combustion characteristics sufficiently to allow operation at the desired lower temperature conditions resulting from diluent addition, without the onset of unstable combustion that can arise at lower combustor operating temperatures.

Performance of an ablator for Space Shuttle inorbit repair in an arc-plasma airstream

NASA Technical Reports Server (NTRS)

Stewart, D. A.; Cuellar, M.; Flowers, O.

1983-01-01

An ablator patch material performed well in an arc plasma environment simulating nominal Earth entry conditions for the Space Shuttle. Ablation tests using vacuum molded cones provided data to optimize the formulation of a two part polymer system for application under space conditions. The blunt cones were made using a Teflon mold and a state of the art caulking gun. Char stability of formulations with various amounts of catalyst and diluent were investigated. The char was found to be unstable in formulations with low amounts of catalyst and high amounts of diluent. The best polymer system determined by these tests was evaluated using a half tile patch in a multiple High Temperature Reusable surface Insulation tile model. It was demonstrated that this ablator could be applied in a space environment using a state of the art caulking gun, would maintain the outer mold line of the thermal protection system during entry, and would keep the bond line temperature at the aluminum tile interface below the design limit.

Formulation design for optimal high-shear wet granulation using on-line torque measurements.

PubMed

Cavinato, Mauro; Bresciani, Massimo; Machin, Marianna; Bellazzi, Guido; Canu, Paolo; Santomaso, Andrea C

2010-03-15

An alternative procedure for achieving formulation design in a high-shear wet granulation process has been developed. Particularly, a new formulation map has been proposed which describes the onset of a significant granule growth as a function of the formulation variables (diluent, dry and liquid binder). Granule growth has been monitored using on-line impeller torque and evaluated as changes in granule particle size distribution with respect to the dry formulation. It is shown how the onset of granule growth is denoted by an abrupt increase in the torque value requires the amount of binder liquid added to be greater than a certain threshold that is identified here as 'minimum liquid volume'. This minimum liquid volume is determined as a function of dry binder type, amount, hygroscopicity and particle size distribution of diluent. It is also demonstrated how this formulation map can be constructed from independent measurements of binder glass transition temperatures using a static humidity conditioning system. 2009 Elsevier B.V. All rights reserved.

Extractant composition including crown ether and calixarene extractants

DOEpatents

Meikrantz, David H.; Todd, Terry A.; Riddle, Catherine L.; Law, Jack D.; Peterman, Dean R.; Mincher, Bruce J.; McGrath, Christopher A.; Baker, John D.

2009-04-28

An extractant composition comprising a mixed extractant solvent consisting of calix[4] arene-bis-(tert-octylbenzo)-crown-6 ("BOBCalixC6"), 4',4',(5')-di-(t-butyldicyclo-hexano)-18-crown-6 ("DtBu18C6"), and at least one modifier dissolved in a diluent. The DtBu18C6 may be present at from approximately 0.01M to approximately 0.4M, such as at from approximately 0.086 M to approximately 0.108 M. The modifier may be 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol ("Cs-7SB") and may be present at from approximately 0.01M to approximately 0.8M. In one embodiment, the mixed extractant solvent includes approximately 0.15M DtBu18C6, approximately 0.007M BOBCalixC6, and approximately 0.75M Cs-7SB modifier dissolved in an isoparaffinic hydrocarbon diluent. The extractant composition further comprises an aqueous phase. The mixed extractant solvent may be used to remove cesium and strontium from the aqueous phase.

Effects of egg yolk, glycerol and the freezing rate on the viability and acrosomal structures of frozen ram spermatozoa.

PubMed

Watson, P F; Martin, I C

1975-04-01

The influence of egg yolk, glycerol and the freezing rate on the survival of ram spermatozoa and on the structure of their acrosomes after freezing was investigated. Egg yolk was shown to be beneficial not only during chilling but also during freezing; of the levels examined, 1-5% gave the greatest protection. Although the presence of glycerol in the diluent improved the survival of spermatozoa, increasing concentrations produced significant deterioration of the acrosomes. With closely controlled linear cooling rates, no overall difference was detected in the survival of spermatozoa frozen at rates between 6 and 24 degrees C per min. However, a significant interaction between freezing rate and the inclusion of glycerol in the diluent showed that glycerol was less important at the highest freezing rate. A sudden cooling phase near to the freezing point following the release of the latent heat of fusion was not detrimental to spermatozoa.

Improved quality of frozen boer goat semen with the addition of sweet orange essential oil on tris yolk and gentamicin extender

NASA Astrophysics Data System (ADS)

Sitepu, S. A.; Zaituni, U.; Jaswandi; Hendri

2018-02-01

This research aimed to determine the extent of frozen semen quality Boer Goat by essential oils of sweet orange peel in tris yolk and gentamicin extender. Research has been conducted at the Laboratory Loka Penelitian Kambing Potong Sei Putih, Deli Serdang, North Sumatra in February 2017. This study used a completely randomized design with 4 treatments and 5 replications. Treatments are 0.25; 0.5; 0.75 and 1% essential oils as additional diluent. The parameters were measured percentage Motility, membrane integrity, acrosome integrity and viability Boer Goat frozen semen. The results showed that the addition of essential oils as diluent semen was significant (P <0.01) in the percentage motility, Viability, membrane integrity and acrosome integrity Boer Goat frozen semen. Motility, membrane integrity, acrosome integrity and viability was significantly higher in all treated groups than the control group. The best results of all treatments In the study was the addition of essential oil as much as 1%.

Actinide and lanthanide separation process (ALSEP)

DOEpatents

Guelis, Artem V.

2013-01-15

The process of the invention is the separation of minor actinides from lanthanides in a fluid mixture comprising, fission products, lanthanides, minor actinides, rare earth elements, nitric acid and water by addition of an organic chelating aid to the fluid; extracting the fluid with a solvent comprising a first extractant, a second extractant and an organic diluent to form an organic extractant stream and an aqueous raffinate. Scrubbing the organic stream with a dicarboxylic acid and a chelating agent to form a scrubber discharge. The scrubber discharge is stripped with a simple buffering agent and a second chelating agent in the pH range of 2.5 to 6.1 to produce actinide and lanthanide streams and spent organic diluents. The first extractant is selected from bis(2-ethylhexyl)hydrogen phosphate (HDEHP) and mono(2-ethylhexyl)2-ethylhexyl phosphonate (HEH(EHP)) and the second extractant is selected from N,N,N,N-tetra-2-ethylhexyl diglycol amide (TEHDGA) and N,N,N',N'-tetraoctyl-3-oxapentanediamide (TODGA).

Pressure and temperature dependences of the reaction of OH with nitric acid

NASA Technical Reports Server (NTRS)

Stachnik, R. A.; Molina, L. T.; Molina, M. J.

1986-01-01

Rate constants for the reaction of OH with HNO3 have been measured by using a laser flash photolysis resonance absorption technique at 298 and 248 K in the presence of 10-730 Torr of He, N2, and SF6. A dependence on total pressure was observed with rate constant values increasing at 298 K from 1.11 x 10 to the -13th cu cm/molecule/s at 10 Torr to 1.45 x 10 to the -13th cu cm/molecule/s at 730 Torr, and at 248 K from 1.87 x 10 to the -13th cu cm/molecule/s at 10 Torr to 3.07 x 10 to the -13th cu cm/molecule/s at 730 Torr with helium as the diluent gas. Falloff behavior occurred at lower pressures with SF6 or N2 as the diluent gas. Extrapolated zero pressure rate constants were determined and correspond to an Arrhenius activation energy of E/R = -710 K.

21 CFR 73.1496 - Mica.

Code of Federal Regulations, 2010 CFR

2010-04-01

... AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1496 Mica. (a) Identity. (1) The color additive mica is a white... properties. (2) Color additive mixtures for drug use made with mica may contain only those diluents listed in...

Laser Diagnostic Analyses of Sooting Flames.

DTIC Science & Technology

1984-11-29

flame front as expected. However the fuel flame length is considerably shorter than the luminous height, and the flame surface must cross the soot surface...very useful in understanding this behaviour and the fact that the fuel flame length increases only slightly on addition of diluent--while the visible

Process of preparing tritiated porous silicon

DOEpatents

Tam, Shiu-Wing

1997-01-01

A process of preparing tritiated porous silicon in which porous silicon is equilibrated with a gaseous vapor containing HT/T.sub.2 gas in a diluent for a time sufficient for tritium in the gas phase to replace hydrogen present in the pore surfaces of the porous silicon.

21 CFR 73.1496 - Mica.

Code of Federal Regulations, 2013 CFR

2013-04-01

... AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1496 Mica. (a) Identity. (1) The color additive mica is a white... properties. (2) Color additive mixtures for drug use made with mica may contain only those diluents listed in...

21 CFR 73.1496 - Mica.

Code of Federal Regulations, 2014 CFR

2014-04-01

... AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1496 Mica. (a) Identity. (1) The color additive mica is a white... properties. (2) Color additive mixtures for drug use made with mica may contain only those diluents listed in...

21 CFR 73.1496 - Mica.

Code of Federal Regulations, 2011 CFR

2011-04-01

... AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1496 Mica. (a) Identity. (1) The color additive mica is a white... properties. (2) Color additive mixtures for drug use made with mica may contain only those diluents listed in...

21 CFR 73.1496 - Mica.

Code of Federal Regulations, 2012 CFR

2012-04-01

... AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1496 Mica. (a) Identity. (1) The color additive mica is a white... properties. (2) Color additive mixtures for drug use made with mica may contain only those diluents listed in...

Effect of different antioxidant additives in semen diluent on cryopreservability (-196°C) of buffalo semen.

PubMed

Patel, Hardik A; Siddiquee, G M; Chaudhari, Dinesh V; Suthar, Vishal S

2016-03-01

The aim of this study was to evaluate the effect of different antioxidant additives in standard tris-fructose-egg yolk-glycerol (TFYG) extender on the cryopreservability of buffalo semen. Semen collection using artificial vagina, twice weekly for 5 weeks from three pedigreed health breeding bulls of Mehsani breed, aged between 6 and 8 years. Immediately after initial evaluation all 30 qualifying ejaculates (10/bull) were split into three aliquots and diluted at 34°C keeping the concentration of 100 million spermatozoa/ml with standard TFYG extender as control and TFYG having two antioxidant additives - Cysteine HCl at 1 mg/ml and ascorbic acid at 0.2 mg/ml to study their comparative performance. Semen filled in French Mini straws using IS-4 system and gradually cooled to 4°C and equilibrated for 4 h in cold handing cabinet. After completion of equilibration, straws were cryopreserved in LN2 by Programmable Bio-freezer. Semen was examined at post-dilution, post-equilibration, and post-thaw stages for sperm quality parameters, and at each stage plasma was separated for enzymatic analysis of aspartate aminotransferase (AST), lactate dehydrogenase (LDH), and alkaline phosphatase (AKP). The mean percentage of sperms in TFYG, TFYG + cysteine HCl and TFYG + ascorbic acid diluents at post-thaw stage in terms of progressive motility (52.83±0.52, 57.83±0.52, 57.83±0.52), livability (78.70±0.21, 82.33±0.23, 81.73±0.22), and abnormality (5.43±0.21, 5.03±0.17, 5.23±0.18) varied significantly (p<0.05) between control TFYG and TFYG having antioxidant additives. The mean U/L activities of AST (78.70±0.47, 72.80±0.48, 73.30±0.54), LDH (172.70±0.41, 155.78±0.42, 156.33±0.41), and AKP (103.61±0.34, 90.20±0.34, 91.03±0.34) in semen diluted with TFYG, TFYG + cysteine HCl and TFYG + ascorbic acid diluents at post-thaw stage, respectively, which showed significantly (p<0.05) higher leakage of enzymes in control TFYG than TFYG incorporated with additives. Incorporation of antioxidant additives such as cysteine HCl and ascorbic acid in standard TFYG diluents improves sperm quality parameters, reduces enzyme leakage, and ultimately advances cryopreservability of buffalo semen.

Delayed post-treatment with bone marrow-derived mesenchymal stem cells is neurorestorative of striatal medium-spiny projection neurons and improves motor function after neonatal rat hypoxia-ischemia.

PubMed

Cameron, Stella H; Alwakeel, Amr J; Goddard, Liping; Hobbs, Catherine E; Gowing, Emma K; Barnett, Elizabeth R; Kohe, Sarah E; Sizemore, Rachel J; Oorschot, Dorothy E

2015-09-01

Perinatal hypoxia-ischemia is a major cause of striatal injury and may lead to cerebral palsy. This study investigated whether delayed administration of bone marrow-derived mesenchymal stem cells (MSCs), at one week after neonatal rat hypoxia-ischemia, was neurorestorative of striatal medium-spiny projection neurons and improved motor function. The effect of a subcutaneous injection of a high-dose, or a low-dose, of MSCs was investigated in stereological studies. Postnatal day (PN) 7 pups were subjected to hypoxia-ischemia. At PN14, pups received treatment with either MSCs or diluent. A subset of high-dose pups, and their diluent control pups, were also injected intraperitoneally with bromodeoxyuridine (BrdU), every 24h, on PN15, PN16 and PN17. This permitted tracking of the migration and survival of neuroblasts originating from the subventricular zone into the adjacent injured striatum. Pups were euthanized on PN21 and the absolute number of striatal medium-spiny projection neurons was measured after immunostaining for DARPP-32 (dopamine- and cAMP-regulated phosphoprotein-32), double immunostaining for BrdU and DARPP-32, and after cresyl violet staining alone. The absolute number of striatal immunostained calretinin interneurons was also measured. There was a statistically significant increase in the absolute number of DARPP-32-positive, BrdU/DARPP-32-positive, and cresyl violet-stained striatal medium-spiny projection neurons, and fewer striatal calretinin interneurons, in the high-dose mesenchymal stem cell (MSC) group compared to their diluent counterparts. A high-dose of MSCs restored the absolute number of these neurons to normal uninjured levels, when compared with previous stereological data on the absolute number of cresyl violet-stained striatal medium-spiny projection neurons in the normal uninjured brain. For the low-dose experiment, in which cresyl violet-stained striatal medium-spiny neurons alone were measured, there was a lower statistically significant increase in their absolute number in the MSC group compared to their diluent controls. Investigation of behavior in another cohort of animals showed that delayed administration of a high-dose of bone marrow-derived MSCs, at one week after neonatal rat hypoxia-ischemia, improved motor function on the cylinder test. Thus, delayed therapy with a high- or low-dose of adult MSCs, at one week after injury, is effective in restoring the loss of striatal medium-spiny projection neurons after neonatal rat hypoxia-ischemia and a high-dose of MSCs improved motor function. Copyright © 2015 Elsevier Inc. All rights reserved.

Sprayable titanium composition

DOEpatents

Tracy, Chester E.; Kern, Werner; Vibronek, Robert D.

1980-01-01

The addition of 2-ethyl-1-hexanol to an organometallic titanium compound dissolved in a diluent and optionally containing a lower aliphatic alcohol spreading modifier, produces a solution that can be sprayed onto a substrate and cured to form an antireflection titanium oxide coating having a refractive index of from about 2.0 to 2.2.

40 CFR 91.312 - Analytical gases.

Code of Federal Regulations, 2012 CFR

2012-07-01

... nitrogen as the predominant diluent with the balance oxygen. (e) Fuel for the hydrocarbon flame ionization... operation. (1) Purified nitrogen, also referred to as “zero-grade nitrogen” (Contamination≤1 ppm C, ≤1 ppm... mixture (40±2 percent hydrogen, balance helium) (Contamination≤1 ppm C, ≤400 ppm CO) (4) Purified...

40 CFR 91.312 - Analytical gases.

Code of Federal Regulations, 2011 CFR

2011-07-01

... nitrogen as the predominant diluent with the balance oxygen. (e) Fuel for the hydrocarbon flame ionization... operation. (1) Purified nitrogen, also referred to as “zero-grade nitrogen” (Contamination≤1 ppm C, ≤1 ppm... mixture (40±2 percent hydrogen, balance helium) (Contamination≤1 ppm C, ≤400 ppm CO) (4) Purified...

40 CFR 91.312 - Analytical gases.

Code of Federal Regulations, 2010 CFR

2010-07-01

... nitrogen as the predominant diluent with the balance oxygen. (e) Fuel for the hydrocarbon flame ionization... operation. (1) Purified nitrogen, also referred to as “zero-grade nitrogen” (Contamination≤1 ppm C, ≤1 ppm... mixture (40±2 percent hydrogen, balance helium) (Contamination≤1 ppm C, ≤400 ppm CO) (4) Purified...

40 CFR 91.312 - Analytical gases.

Code of Federal Regulations, 2013 CFR

2013-07-01

... nitrogen as the predominant diluent with the balance oxygen. (e) Fuel for the hydrocarbon flame ionization... operation. (1) Purified nitrogen, also referred to as “zero-grade nitrogen” (Contamination≤1 ppm C, ≤1 ppm... mixture (40±2 percent hydrogen, balance helium) (Contamination≤1 ppm C, ≤400 ppm CO) (4) Purified...

9 CFR 112.6 - Packaging biological products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Packaging biological products. 112.6 Section 112.6 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... if seal is broken.” (d) Diluent for the following products need not be packaged with the final...

9 CFR 112.6 - Packaging biological products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Packaging biological products. 112.6 Section 112.6 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... if seal is broken.” (d) Diluent for the following products need not be packaged with the final...

21 CFR 74.250 - Orange B.

Code of Federal Regulations, 2013 CFR

2013-04-01

... FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION Foods § 74.250 Orange B. (a) Identity. (1) The color additive Orange B is.... (2) The diluents in color additive mixtures for food use containing Orange B are limited to those...

21 CFR 73.85 - Caramel.

Code of Federal Regulations, 2014 CFR

2014-04-01

... EXEMPT FROM CERTIFICATION Foods § 73.85 Caramel. (a) Identity. (1) The color additive caramel is the dark... intended effect. (4) Color additive mixtures for food use made with caramel may contain only diluents that are suitable and that are listed in this subpart as safe in color additive mixtures for coloring foods...

21 CFR 73.85 - Caramel.

Code of Federal Regulations, 2012 CFR

2012-04-01

... EXEMPT FROM CERTIFICATION Foods § 73.85 Caramel. (a) Identity. (1) The color additive caramel is the dark... intended effect. (4) Color additive mixtures for food use made with caramel may contain only diluents that are suitable and that are listed in this subpart as safe in color additive mixtures for coloring foods...

21 CFR 74.250 - Orange B.

Code of Federal Regulations, 2012 CFR

2012-04-01

... FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION Foods § 74.250 Orange B. (a) Identity. (1) The color additive Orange B is.... (2) The diluents in color additive mixtures for food use containing Orange B are limited to those...

21 CFR 74.250 - Orange B.

Code of Federal Regulations, 2011 CFR

2011-04-01

... FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION Foods § 74.250 Orange B. (a) Identity. (1) The color additive Orange B is.... (2) The diluents in color additive mixtures for food use containing Orange B are limited to those...

21 CFR 73.85 - Caramel.

Code of Federal Regulations, 2013 CFR

2013-04-01

... EXEMPT FROM CERTIFICATION Foods § 73.85 Caramel. (a) Identity. (1) The color additive caramel is the dark... intended effect. (4) Color additive mixtures for food use made with caramel may contain only diluents that are suitable and that are listed in this subpart as safe in color additive mixtures for coloring foods...

21 CFR 74.250 - Orange B.

Code of Federal Regulations, 2014 CFR

2014-04-01

... FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION Foods § 74.250 Orange B. (a) Identity. (1) The color additive Orange B is.... (2) The diluents in color additive mixtures for food use containing Orange B are limited to those...

21 CFR 73.1085 - Caramel.

Code of Federal Regulations, 2010 CFR

2010-04-01

... ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1085 Caramel. (a) Identity and specifications. (1) The color additive caramel shall conform in identity and specifications to the requirements of § 73.85(a) (1), (2), and (3) and (b). (2) The diluents in color additive mixtures for drug use containing caramel shall be...

21 CFR 73.2329 - Guanine.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Guanine. 73.2329 Section 73.2329 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR... coloring cosmetics generally, only those diluents listed under § 73.1001(a)(1); (ii) For coloring...

21 CFR 522.1002 - Follicle stimulating hormone.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Follicle stimulating hormone. 522.1002 Section 522....1002 Follicle stimulating hormone. (a)(1) Specifications. Each package contains 2 vials. One vial... hormone. The other vial contains 10 milliliters of aqueous diluent. (2) Sponsor. See 059521 in § 510.600(c...

21 CFR 522.1002 - Follicle stimulating hormone.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Follicle stimulating hormone. 522.1002 Section 522....1002 Follicle stimulating hormone. (a)(1) Specifications. Each package contains 2 vials. One vial... hormone. The other vial contains 10 milliliters of aqueous diluent. (2) Sponsor. See No. 052923 in § 510...

9 CFR 112.3 - Diluent labels.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES... provision. (c) The recoverable quantity of contents in cubic centimeters (cc) or milliliters (ml). (d) A... organisms or viruses, the notice, “Burn this container and all unused contents,” except that, in the case of...

Starch inclusion complex to emulsify cedarwood oil and pressure treat wood

USDA-ARS?s Scientific Manuscript database

Previously, we have demonstrated that CO2-derived cedarwood oil has a range of bioactivities, including insect repellency and toxicity as well as conferring resistance to both termites and wood-rot fungi. In the earlier pressure treatment work, ethanol was used as the diluent/carrier. However, it is...

Experimental studies at the Idaho Chemical Processing Plant on actinide partitioning from acidic nuclear wastes

DOE Office of Scientific and Technical Information (OSTI.GOV)

McIssaac, L. D.; Baker, J. D.; Meikrantz, D. H.

1980-01-01

Wastes generated at ICPP and in the reprocessing of LWR fuel is discussed separately. DHDECMP is used as extractant. Studies on DHDECMP purification and toxicity, diluent effects, reaction kinetics, radioloysis, mixer-settler performance, etc. are reported. 10 tables, 3 figures. (DLC)

40 CFR 86.308-79 - Gas specifications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... New Gasoline-Fueled and Diesel-Fueled Heavy-Duty Engines; Gaseous Exhaust Test Procedures § 86.308-79... Diesel engine tests the diluent shall be zero-grade air. (3) Calibration or span gases for the NOX...) Alternate pure hydrogen fuel. Some HFID's are designed to operate on pure hydrogen. Generally the HFID fuel...

40 CFR 86.308-79 - Gas specifications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... New Gasoline-Fueled and Diesel-Fueled Heavy-Duty Engines; Gaseous Exhaust Test Procedures § 86.308-79... Diesel engine tests the diluent shall be zero-grade air. (3) Calibration or span gases for the NOX...) Alternate pure hydrogen fuel. Some HFID's are designed to operate on pure hydrogen. Generally the HFID fuel...

Process of preparing tritiated porous silicon

DOEpatents

Tam, S.W.

1997-02-18

A process of preparing tritiated porous silicon is described in which porous silicon is equilibrated with a gaseous vapor containing HT/T{sub 2} gas in a diluent for a time sufficient for tritium in the gas phase to replace hydrogen present in the pore surfaces of the porous silicon. 1 fig.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iseki, Tadahiro; Inaba, Makoto; Takahashi, Naoki

During the second and third steps of Active Test at Rokkasho Reprocessing Plant (RRP), the performances of the Separation Facility have been checked; (A) diluent washing efficiency, (B) plutonium stripping efficiency, (C) decontamination factor of fission products and (D) plutonium and uranium leakage into raffinate and spent solvent. Test results were equivalent to or better than expected. (authors)

Cold flow properties of fatty acid methyl esters: Additives versus diluents

USDA-ARS?s Scientific Manuscript database

Biodiesel is typically composed of fatty acid methyl esters (FAME) converted from agricultural lipids. Common feedstocks include soybean oil, canola oil, rapeseed oil, sunflower oil, and palm oil. Recent debate on the conversion of edible oils into non-food products has created opportunities to deve...

Determination of a kinetic region in catalytic oxidation of carbon monoxide

NASA Technical Reports Server (NTRS)

Sultanov, M. Y.; Sadykhova, K. A.

1981-01-01

The catalytic activity of cupric oxide activated with ceric oxide in a braod interval of volumetric velocities was investigated. It was determined that for practical catalysts used in the diffuse region, dilution of the active substance by an inert diluent increases the effectiveness of the catalysts.

40 CFR 60.1885 - What must I include in my annual report?

Code of Federal Regulations, 2013 CFR

2013-07-01

... monitoring system (§ 60.1850(a)(1)). (d) For municipal waste combustion units that use activated carbon for... diluent gas, documentation of the relationship between oxygen and carbon dioxide, as specified in § 60...? 60.1885 Section 60.1885 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR...

40 CFR 60.1885 - What must I include in my annual report?

Code of Federal Regulations, 2014 CFR

2014-07-01

... monitoring system (§ 60.1850(a)(1)). (d) For municipal waste combustion units that use activated carbon for... diluent gas, documentation of the relationship between oxygen and carbon dioxide, as specified in § 60...? 60.1885 Section 60.1885 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR...

40 CFR 60.1885 - What must I include in my annual report?

Code of Federal Regulations, 2012 CFR

2012-07-01

... monitoring system (§ 60.1850(a)(1)). (d) For municipal waste combustion units that use activated carbon for... diluent gas, documentation of the relationship between oxygen and carbon dioxide, as specified in § 60...? 60.1885 Section 60.1885 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR...

40 CFR 89.312 - Analytical gases.

Code of Federal Regulations, 2012 CFR

2012-07-01

... by dynamic blending. Nitrogen shall be the predominant diluent with the balance oxygen. (e) Fuel for... gases must be available for operation: (1) Purified nitrogen (Contamination ≤ 1 ppm C, ≤ 1 ppm CO, ≤ 400 ppm CO2, ≤ 0.1 ppm NO) (2) [Reserved] (3) Hydrogen-helium mixture (40 ±2 percent hydrogen, balance...

40 CFR 1065.140 - Dilution for gaseous and PM constituents.

Code of Federal Regulations, 2013 CFR

2013-07-01

... nitrogen. For gaseous emission measurement the diluent must be at least 15 °C. Note that the composition of... chemical balance equations in § 1065.655 to calculate the mole fraction of water in the dilute exhaust... condensation (either measured or from the chemical balance), and set any negative values to zero. This...

40 CFR 1065.140 - Dilution for gaseous and PM constituents.

Code of Federal Regulations, 2011 CFR

2011-07-01

... nitrogen. For gaseous emission measurement the diluent must be at least 15 °C. Note that the composition of... chemical balance equations in § 1065.655 to calculate the mole fraction of water in the dilute exhaust... condensation (either measured or from the chemical balance), and set any negative values to zero. This...

40 CFR 90.312 - Analytical gases.

Code of Federal Regulations, 2010 CFR

2010-07-01

... contentration must be between 0 and 1 percent O2. Nitrogen must be the predominant diluent with the balance... available for operation: (1) Purified nitrogen, also refered to as “zero-grade nitrogen” (Contamination ≤ 1...) Hydrogen-helium mixture (40 ±2 percent hydrogen, balance helium) (Contamination ≤ 1 ppm C, ≤ 400 ppm CO...

40 CFR 90.312 - Analytical gases.

Code of Federal Regulations, 2011 CFR

2011-07-01

... contentration must be between 0 and 1 percent O2. Nitrogen must be the predominant diluent with the balance... available for operation: (1) Purified nitrogen, also refered to as “zero-grade nitrogen” (Contamination ≤ 1...) Hydrogen-helium mixture (40 ±2 percent hydrogen, balance helium) (Contamination ≤ 1 ppm C, ≤ 400 ppm CO...

40 CFR 86.1314-94 - Analytical gases.

Code of Federal Regulations, 2010 CFR

2010-07-01

... CO2. respectively, using nitrogen as the diluent. (b) Gases for the hydrocarbon analyzer shall be: (1... named as NOX with a maximum NO2 concentration of five percent of the nominal value using nitrogen as the... the balance being helium. The mixture shall contain less than 1 ppm equivalent carbon response. 98 to...

40 CFR 86.1314-94 - Analytical gases.

Code of Federal Regulations, 2012 CFR

2012-07-01

... CO2. respectively, using nitrogen as the diluent. (b) Gases for the hydrocarbon analyzer shall be: (1... named as NOX with a maximum NO2 concentration of five percent of the nominal value using nitrogen as the... the balance being helium. The mixture shall contain less than 1 ppm equivalent carbon response. 98 to...

40 CFR 90.312 - Analytical gases.

Code of Federal Regulations, 2012 CFR

2012-07-01

... contentration must be between 0 and 1 percent O2. Nitrogen must be the predominant diluent with the balance... available for operation: (1) Purified nitrogen, also refered to as “zero-grade nitrogen” (Contamination ≤ 1...) Hydrogen-helium mixture (40 ±2 percent hydrogen, balance helium) (Contamination ≤ 1 ppm C, ≤ 400 ppm CO...

40 CFR 86.1314-94 - Analytical gases.

Code of Federal Regulations, 2013 CFR

2013-07-01

... CO2. respectively, using nitrogen as the diluent. (b) Gases for the hydrocarbon analyzer shall be: (1... named as NOX with a maximum NO2 concentration of five percent of the nominal value using nitrogen as the... the balance being helium. The mixture shall contain less than 1 ppm equivalent carbon response. 98 to...

40 CFR 86.1314-94 - Analytical gases.

Code of Federal Regulations, 2011 CFR

2011-07-01

... CO2. respectively, using nitrogen as the diluent. (b) Gases for the hydrocarbon analyzer shall be: (1... named as NOX with a maximum NO2 concentration of five percent of the nominal value using nitrogen as the... the balance being helium. The mixture shall contain less than 1 ppm equivalent carbon response. 98 to...

40 CFR 90.312 - Analytical gases.

Code of Federal Regulations, 2014 CFR

2014-07-01

... contentration must be between 0 and 1 percent O2. Nitrogen must be the predominant diluent with the balance... for operation: (1) Purified nitrogen, also referred to as “zero-grade nitrogen” (Contamination ≤ 1 ppm...) Hydrogen-helium mixture (40 ±2 percent hydrogen, balance helium) (Contamination ≤ 1 ppm C, ≤ 400 ppm CO...

40 CFR 90.312 - Analytical gases.

Code of Federal Regulations, 2013 CFR

2013-07-01

... contentration must be between 0 and 1 percent O2. Nitrogen must be the predominant diluent with the balance... available for operation: (1) Purified nitrogen, also referred to as “zero-grade nitrogen” (Contamination ≤ 1...) Hydrogen-helium mixture (40 ±2 percent hydrogen, balance helium) (Contamination ≤ 1 ppm C, ≤ 400 ppm CO...

40 CFR 89.312 - Analytical gases.

Code of Federal Regulations, 2010 CFR

2010-07-01

... by dynamic blending. Nitrogen shall be the predominant diluent with the balance oxygen. (e) Fuel for... gases must be available for operation: (1) Purified nitrogen (Contamination ≤ 1 ppm C, ≤ 1 ppm CO, ≤ 400 ppm CO2, ≤ 0.1 ppm NO) (2) [Reserved] (3) Hydrogen-helium mixture (40 ±2 percent hydrogen, balance...

40 CFR 89.312 - Analytical gases.

Code of Federal Regulations, 2011 CFR

2011-07-01

... by dynamic blending. Nitrogen shall be the predominant diluent with the balance oxygen. (e) Fuel for... gases must be available for operation: (1) Purified nitrogen (Contamination ≤ 1 ppm C, ≤ 1 ppm CO, ≤ 400 ppm CO2, ≤ 0.1 ppm NO) (2) [Reserved] (3) Hydrogen-helium mixture (40 ±2 percent hydrogen, balance...

40 CFR 1065.140 - Dilution for gaseous and PM constituents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... nitrogen. For gaseous emission measurement the diluent must be at least 15 °C. Note that the composition of... chemical balance equations in § 1065.655 to calculate the mole fraction of water in the dilute exhaust... condensation (either measured or from the chemical balance), and set any negative values to zero. This...

40 CFR 1065.140 - Dilution for gaseous and PM constituents.

Code of Federal Regulations, 2012 CFR

2012-07-01

... nitrogen. For gaseous emission measurement the diluent must be at least 15 °C. Note that the composition of... chemical balance equations in § 1065.655 to calculate the mole fraction of water in the dilute exhaust... condensation (either measured or from the chemical balance), and set any negative values to zero. This...

40 CFR 89.312 - Analytical gases.

Code of Federal Regulations, 2013 CFR

2013-07-01

... by dynamic blending. Nitrogen shall be the predominant diluent with the balance oxygen. (e) Fuel for... gases must be available for operation: (1) Purified nitrogen (Contamination ≤ 1 ppm C, ≤ 1 ppm CO, ≤ 400 ppm CO2, ≤ 0.1 ppm NO) (2) [Reserved] (3) Hydrogen-helium mixture (40 ±2 percent hydrogen, balance...

40 CFR 89.312 - Analytical gases.

Code of Federal Regulations, 2014 CFR

2014-07-01

... blending. Nitrogen shall be the predominant diluent with the balance oxygen. (e) Fuel for the FID shall be... be available for operation: (1) Purified nitrogen (Contamination ≤ 1 ppm C, ≤ 1 ppm CO, ≤ 400 ppm CO2, ≤ 0.1 ppm NO) (2) [Reserved] (3) Hydrogen-helium mixture (40 ±2 percent hydrogen, balance helium...

21 CFR 74.706 - FD&C Yellow No. 6.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION Foods § 74.706 FD&C Yellow No. 6. (a) Identity. (1) The color additive FD...) Color additive mixtures for food use made with FD&C Yellow No. 6 may contain only those diluents that...

21 CFR 74.706 - FD&C Yellow No. 6.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION Foods § 74.706 FD&C Yellow No. 6. (a) Identity. (1) The color additive FD...) Color additive mixtures for food use made with FD&C Yellow No. 6 may contain only those diluents that...

21 CFR 74.706 - FD&C Yellow No. 6.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION Foods § 74.706 FD&C Yellow No. 6. (a) Identity. (1) The color additive FD...) Color additive mixtures for food use made with FD&C Yellow No. 6 may contain only those diluents that...

21 CFR 74.706 - FD&C Yellow No. 6.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION Foods § 74.706 FD&C Yellow No. 6. (a) Identity. (1) The color additive FD...) Color additive mixtures for food use made with FD&C Yellow No. 6 may contain only those diluents that...

21 CFR 74.706 - FD&C Yellow No. 6.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR ADDITIVES SUBJECT TO CERTIFICATION Foods § 74.706 FD&C Yellow No. 6. (a) Identity. (1) The color additive FD...) Color additive mixtures for food use made with FD&C Yellow No. 6 may contain only those diluents that...

21 CFR 73.169 - Grape color extract.

Code of Federal Regulations, 2011 CFR

2011-04-01

... diluents listed in this subpart as safe and suitable in color additive mixtures for coloring foods. (b... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Grape color extract. 73.169 Section 73.169 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF...

21 CFR 73.169 - Grape color extract.

Code of Federal Regulations, 2010 CFR

2010-04-01

... diluents listed in this subpart as safe and suitable in color additive mixtures for coloring foods. (b... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Grape color extract. 73.169 Section 73.169 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF...

40 CFR Appendix A to Part 75 - Specifications and Test Procedures

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Specifications and Test Procedures A... (CONTINUED) CONTINUOUS EMISSION MONITORING Pt. 75, App. A Appendix A to Part 75—Specifications and Test... concentration monitor and diluent gas monitor) will pass the relative accuracy test (see section 6 of this...

9 CFR 113.35 - Detection of viricidal activity.

Code of Federal Regulations, 2010 CFR

2010-01-01

... with each virus fraction for which it is to be used as a diluent. If the vaccine to be rehydrated contains more than one virus fraction, the test shall be conducted with each fraction after neutralization of the other fraction(s), and/or dilution of the vaccine beyond the titer range of the other fraction...

EXTENDED ALKYLATE PRODUCTION ACTIVITY DURING FIXED-BED SUPERCRITICAL 1-BUTENE/ISOBUTANE ALKYLATION ON SOLID ACID CATALYSTS USING CARBON DIOXIDE AS DILUENT. (R824729)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

77 FR 34380 - Explorer Pipeline Company; Notice of Amendment to Petition for Declaratory Order

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-11

... Petition, Explorer described the Diluent Extension Project as involving the construction of a new pipeline..., pursuant to Rule 215 of the Commission's Rules of Practice and Procedure, 18 CFR 385.215 (2011), Explorer Pipeline Company (Explorer) filed an amendment to its March 23, 2012 Petition to the Federal Energy...

Comparison of effects of cryopreservation diluents on the ability of Ram sperm to reduce resazurin dye

USDA-ARS?s Scientific Manuscript database

Resazurin dye is an effective way to test the metabolism of sperm. As sperm move, they create metabolic waste which is detected by the dye. Another way sperm are evaluated is by Computer-Assisted Sperm Analysis (CASA). CASA detects motility, progression, curvilinear velocity, lateral head amplitude,...

40 CFR 180.910 - Inert ingredients used pre- and post-harvest; exemptions from the requirement of a tolerance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... formulation Surfactant α-Alkyl(C6-C15)-ω-hydroxypoly(oxyethylene)sulfate, and its ammonium, calcium, magnesium..., related adjuvants of surfactants Alkyl (C8-C18) sulfate and its ammonium, calcium, isopropylamine... stearate Surfactant Ammonium sulfate Solid diluent, carrier Ammonium thiosulfate Intensifier when used with...

40 CFR 60.266 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... effluent gas from exhaust stream “i”, dscm/hr (dscf/hr). P=average furnace power input, MW. K=conversion....8, the owner or operator shall not allow gaseous diluents to be added to the effluent gas stream after the fabric in an open pressurized fabric filter collector unless the total gas volume flow from...

40 CFR 75.74 - Annual and ozone season monitoring and reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... owner or operator of an affected unit subject both to an Acid Rain emission limitation and to a State or... State or federal NOX mass reduction program that adopts the provisions of this part and that requires...-diluent monitoring system, each flow rate monitoring system, each moisture monitoring system and each...

40 CFR 60.1365 - What records must I keep for continuously monitored pollutants or parameters?

Code of Federal Regulations, 2010 CFR

2010-07-01

... diluent gas, document the relationship between oxygen and carbon dioxide, as specified in § 60.1255. (h... continuously monitored pollutants or parameters? 60.1365 Section 60.1365 Protection of Environment... Recordkeeping § 60.1365 What records must I keep for continuously monitored pollutants or parameters? You must...

40 CFR 60.1365 - What records must I keep for continuously monitored pollutants or parameters?

Code of Federal Regulations, 2011 CFR

2011-07-01

... diluent gas, document the relationship between oxygen and carbon dioxide, as specified in § 60.1255. (h... continuously monitored pollutants or parameters? 60.1365 Section 60.1365 Protection of Environment... Recordkeeping § 60.1365 What records must I keep for continuously monitored pollutants or parameters? You must...

40 CFR 60.1365 - What records must I keep for continuously monitored pollutants or parameters?

Code of Federal Regulations, 2013 CFR

2013-07-01

... diluent gas, document the relationship between oxygen and carbon dioxide, as specified in § 60.1255. (h... continuously monitored pollutants or parameters? 60.1365 Section 60.1365 Protection of Environment... Recordkeeping § 60.1365 What records must I keep for continuously monitored pollutants or parameters? You must...

40 CFR 60.1365 - What records must I keep for continuously monitored pollutants or parameters?

Code of Federal Regulations, 2012 CFR

2012-07-01

... diluent gas, document the relationship between oxygen and carbon dioxide, as specified in § 60.1255. (h... continuously monitored pollutants or parameters? 60.1365 Section 60.1365 Protection of Environment... Recordkeeping § 60.1365 What records must I keep for continuously monitored pollutants or parameters? You must...

40 CFR 60.1365 - What records must I keep for continuously monitored pollutants or parameters?

Code of Federal Regulations, 2014 CFR

2014-07-01

... diluent gas, document the relationship between oxygen and carbon dioxide, as specified in § 60.1255. (h... continuously monitored pollutants or parameters? 60.1365 Section 60.1365 Protection of Environment... Recordkeeping § 60.1365 What records must I keep for continuously monitored pollutants or parameters? You must...

Coanda injection system for axially staged low emission combustors

DOEpatents

Evulet, Andrei Tristan [Clifton Park, NY; Varatharajan, Balachandar [Cincinnati, OH; Kraemer, Gilbert Otto [Greer, SC; ElKady, Ahmed Mostafa [Niskayuna, NY; Lacy, Benjamin Paul [Greer, SC

2012-05-15

The low emission combustor includes a combustor housing defining a combustion chamber having a plurality of combustion zones. A liner sleeve is disposed in the combustion housing with a gap formed between the liner sleeve and the combustor housing. A secondary nozzle is disposed along a centerline of the combustion chamber and configured to inject a first fluid comprising air, at least one diluent, fuel, or combinations thereof to a downstream side of a first combustion zone among the plurality of combustion zones. A plurality of primary fuel nozzles is disposed proximate to an upstream side of the combustion chamber and located around the secondary nozzle and configured to inject a second fluid comprising air and fuel to an upstream side of the first combustion zone. The combustor also includes a plurality of tertiary coanda nozzles. Each tertiary coanda nozzle is coupled to a respective dilution hole. The tertiary coanda nozzles are configured to inject a third fluid comprising air, at least one other diluent, fuel, or combinations thereof to one or more remaining combustion zones among the plurality of combustion zones.

An investigation of flame spread over shallow liquid pools in microgravity and nonair environments

NASA Technical Reports Server (NTRS)

Ross, Howard D.; Sotos, Raymond G.

1991-01-01

Experiments of interest to combustion fundamentals and spacecraft fire safety investigated flame spread of alcohol fuels over shallow, 15 cm diameter pools in a 5.2 sec free-fall, microgravity facility. Results showed that, independent O2 concentrations, alcohol fuel, and diluent types, microgravity flame spread rates were nearly identical to those corresponding normal-gravity flames for conditions where the normal gravity flames spread uniformly. This similarity indicated buoyancy-related convection in either phase does not affect flame spread, at least for the physical scale of the experiments. However, microgravity extinction coincided with the onset conditions for pulsating spread in normal gravity, implicating gas phase, buoyant flow as a requirement for pulsating spread. When the atmospheric nitrogen was replaced with argon, the conditions for the onset of normal-gravity pulsating flame spread and microgravity flame extinction were changed, in agreement with the expected lowering of the flash point through the thermal properties of the diluent. Helium-diluted flames, however, showed unexpected results with a shift to apparently higher flash-point temperatures and high normal gravity pulsation amplitudes.

An Investigation of Flame Spread over Shallow Liquid Pools in Microgravity and Nonair Environments

NASA Technical Reports Server (NTRS)

Ross, Howard D.; Sotos, Raymond G.

1989-01-01

Experiments of interest to combustion fundamentals and spacecraft fire safety investigated flame spread of alcohol fuels over shallow, 15 cm diameter pools in a 5.2 sec free-fall, microgravity facility. Results showed that, independent O2 concentration, alcohol fuel, and diluent types, microgravity flame spread rates were nearly identical to those corresponding normal-gravity flames for conditions where the normal gravity flames spread uniformly. This similarity indicated buoyancy-related convection in either phase does not affect flame spread, at least for the physical scale of the experiments. However, microgravity extinction coincided with the onset conditions for pulsating spread in normal gravity, implicating gas phase, buoyant flow as a requirement for pulsating spread. When the atmospheric nitrogen was replaced with argon, the conditions for the onset of normal-gravity pulsating flame spread and microgravity flame extinction were changed, in agreement with the expected lowering of the flash point through the thermal properties of the diluent. Helium-diluted flames, however, showed unexpected results with a shift to apparently higher flash-point temperatures and high normal gravity pulsation amplitudes.

Development of a Library Search-Based Screening System for 3,4-Methylenedioxymethamphetamine in Ecstasy Tablets Using a Portable Near-Infrared Spectrometer.

PubMed

Tsujikawa, Kenji; Yamamuro, Tadashi; Kuwayama, Kenji; Kanamori, Tatsuyuki; Iwata, Yuko T; Miyamoto, Kazuna; Kasuya, Fumiyo; Inoue, Hiroyuki

2016-09-01

This is the first report on development of a library search-based screening system for 3,4-methylenedioxymethamphetamine (MDMA) in ecstasy tablets using a portable near-infrared (NIR) spectrometer. The spectrum library consisted of spectra originating from standard substances as well as mixtures of MDMA hydrochloride (MDMA-HCl) and diluents. The raw NIR spectra were mathematically pretreated, and then, a library search was performed using correlation coefficient. To enhance the discrimination ability, the wavelength used for the library search was limited. Mixtures of MDMA-HCl and diluents were used to decide criteria to judge MDMA-positive or MDMA-negative. Confiscated MDMA tablets and medicinal tablets were used for performance check of the criteria. Twenty-two of 27 MDMA tablets were truly judged as MDMA-positive. Five false-negative results may be caused by compounds not included in the library. No false-positive results were obtained for medicinal tablets. This system will be a useful tool for on-site screening of MDMA tablets. © 2016 American Academy of Forensic Sciences.

Synthesis and characterization of a novel resin monomer with low viscosity.

PubMed

Hong, Lihua; Wang, Yu; Wang, Lin; Zhang, Hong; Na, Hui; Zhang, Zhimin

2017-04-01

In this study, we designed and synthesized a novel macromolecule (tetramethyl bisphenol F acrylate, TMBPF-Ac) with low viscosity, excellent mechanical properties, and good biocompatibility. It could be used as a monomer for dental resin composites, which could reduce the risk of human exposure to bisphenol A derivatives in the oral environment. In addition, the monomer could be used without diluent, thereby avoiding the negative effect of a diluent METHODS: TMBPF-Ac was synthesized by a multistep condensation reaction. Its structure was confirmed by 1 H NMR spectra. Different resin mixtures were prepared, and then a number of performance and cytotoxicity tests were performed on these specimens. 1 H NMR spectra showed that the structure of TMBPF-Ac was in accordance with the design. The viscosity of TMBPF-Ac was obviously lower than that of bisphenol-A diglycidyl methacrylate. The three kinds of resins used in this study were in line with ISO 4049:2009 and ISO 10993-5:2009. TMBPF-Ac-based resin had better physical and biological properties. Copyright © 2017 Elsevier Ltd. All rights reserved.

Delivery and evaluation of recombinant adeno-associated viral vectors in the equine distal extremity for the treatment of laminitis.

PubMed

Mason, J B; Gurda, B L; Van Wettere, A; Engiles, J B; Wilson, J M; Richardson, D W

2017-01-01

Our long-term aim is to develop a gene therapy approach for the prevention of laminitis in the contralateral foot of horses with major musculoskeletal injuries and non-weightbearing lameness. The goal of this study was to develop a practical method to efficiently deliver therapeutic proteins deep within the equine foot. Randomised in vivo experiment. We used recombinant adeno-associated viral vectors (rAAVs) to deliver marker genes using regional limb perfusion through the palmar digital artery of the horse. Vector serotypes rAAV2/1, 2/8 and 2/9 all successfully transduced equine foot tissues and displayed similar levels and patterns of transduction. The regional distribution of transduction within the foot decreased with decreasing vector dose. The highest transduction values were seen in the sole and coronary regions and the lowest transduction values were detected in the dorsal hoof-wall region. The use of a surfactant-enriched vector diluent increased regional distribution of the vector and improved the transduction in the hoof-wall region. The hoof-wall region of the foot, which exhibited the lowest levels of transduction using saline as the vector diluent, displayed a dramatic increase in transduction when surfactant was included in the vector diluent (9- to 81-fold increase). In transduced tissues, no significant difference was observed between promoters (chicken β-actin vs. cytomegalovirus) for gene expression. All horses tested for vector-neutralising antibodies were positive for serotype-specific neutralising antibodies to rAAV2/5. The current experiments demonstrate that transgenes can be successfully delivered to the equine distal extremity using rAAV vectors and that serotypes 2/8, 2/9 and 2/1 can successfully transduce tissues of the equine foot. When the vector was diluted with surfactant-containing saline, the level of transduction increased dramatically. The increased level of transduction due to the addition of surfactant also improved the distribution pattern of transduction. © 2015 EVJ Ltd.

Methanol Droplet Combustion in Oxygen-Inert Environments in Microgravity

NASA Technical Reports Server (NTRS)

Nayagam, Vedha; Dietrich, Daniel L.; Hicks, Michael C.; Williams, Forman A.

2013-01-01

The Flame Extinguishment (FLEX) experiment that is currently underway in the Combustion Integrated Rack facility onboard the International Space Station is aimed at understanding the effects of inert diluents on the flammability of condensed phase fuels. To this end, droplets of various fuels, including alkanes and alcohols, are burned in a quiescent microgravity environment with varying amounts of oxygen and inert diluents to determine the limiting oxygen index (LOI) for these fuels. In this study we report experimental observations of methanol droplets burning in oxygen-nitrogen-carbon dioxide and oxygen-nitrogen-helium gas mixtures at 0.7 and 1 atmospheric pressures. The initial droplet size varied between approximately 1.5 mm and 4 mm to capture both diffusive extinction brought about by insufficient residence time at the flame and radiative extinction caused by excessive heat loss from the flame zone. The ambient oxygen concentration varied from a high value of 30% by volume to as low as 12%, approaching the limiting oxygen index for the fuel. The inert dilution by carbon dioxide and helium varied over a range of 0% to 70% by volume. In these experiments, both freely floated and tethered droplets were ignited using symmetrically opposed hot-wire igniters and the burning histories were recorded onboard using digital cameras, downlinked later to the ground for analysis. The digital images yielded droplet and flame diameters as functions of time and subsequently droplet burning rate, flame standoff ratio, and initial and extinction droplet diameters. Simplified theoretical models correlate the measured burning rate constant and the flame standoff ratio reasonably well. An activation energy asymptotic theory accounting for time-dependent water dissolution or evaporation from the droplet is shown to predict the measured diffusive extinction conditions well. The experiments also show that the limiting oxygen index for methanol in these diluent gases is around 12% to 13% oxygen by volume.

Allergen-Induced Increases in Interleukin-25 and Interleukin-25 Receptor Expression in Mature Eosinophils from Atopic Asthmatics.

PubMed

Tang, Wei; Smith, Steven G; Salter, Brittany; Oliveria, John Paul; Mitchell, Patrick; Nusca, Graeme M; Howie, Karen; Gauvreau, Gail M; O'Byrne, Paul M; Sehmi, Roma

2016-01-01

Interleukin (IL)-25 plays a pivotal role in type 2 immune responses. In a baseline cross-sectional study, we previously showed that IL-25 plasma levels and IL-25 receptor (IL-25R: IL-17RA, IL-17RB, and IL-17RA/RB) expression on mature blood eosinophils are increased in atopic asthmatics compared to normal nonatopic controls. This study investigated allergen-induced changes in IL-25 and IL-25R expression in eosinophils from asthmatics. Dual responder atopic asthmatics (n = 14) were enrolled in this randomized diluent-controlled crossover allergen challenge study. Blood was collected before and 24 h after the challenge. The surface expression of IL-25R was evaluated by flow cytometry on eosinophils and Th2 memory cells. In addition, plasma levels of IL-25 were measured by ELISA, and functional responses to IL-25 including type 2 cytokine expression, degranulation, and the migrational responsiveness of eosinophils were evaluated in vitro. Following the allergen but not the diluent inhalation challenge, significant increases in the expression of IL-17RB and IL-17RA/B were found on eosinophils but not on Th2 memory cells. IL-25 plasma levels and the number of eosinophils but not of Th2 memory cells expressing intracellular IL-25 increased significantly in response to the allergen but not the diluent challenge. Stimulation with physiologically relevant concentrations of IL-25 in vitro caused (i) degranulation of eosinophils (measured by eosinophil peroxidase release), (ii) enhanced intracellular expression of IL-5 and IL-13, and (iii) priming of eosinophil migration to eotaxin. IL-25 stimulated intracellular cytokine expression, and the migration of eosinophils was blocked in the presence of a neutralizing IL-25 antibody. Our findings suggest that the IL-25/IL-25R axis may play an important role in promoting the recruitment and proinflammatory function of eosinophils in allergic asthma. © 2016 S. Karger AG, Basel.

Stability of reconstituted parecoxib for injection with commonly used diluents.

PubMed

Crane, I M; Mulhern, M G; Nema, S

2003-10-01

The purpose of this study was to evaluate the effect of diluent type, storage conditions and the nature of package on the stability of reconstituted Parecoxib sodium for injection (PSI). Parecoxib sodium for injection is a lyophilized product for single use. It is intended for the management of acute pain. Six diluent types were initially evaluated for physical compatibility with PSI. Reconstituted PSI was visually inspected at 8, 24 and 48 h after reconstitution with 0.9% sodium chloride injection (NS), lactated ringers injection (LR), bacteriostatic 0.9% NaCl injection (BNS), lactated ringers and 5% dextrose injection (LR + D5W), 5% dextrose injection (D5W), and 5% dextrose + 0.45% NaCl injection (D5W + 1/2NS). Reconstituted PSI, stored in glass vials and glass or plastic syringes at 5 degrees and 25 degrees C, under 500 lx light intensity for 48 h or subjected to freeze-thaw cycles, were tested for chemical stability by high-performance liquid chromatography (HPLC). The PSI reconstituted with NS, BNS, D5W, and D5W + 1/2NS met visual acceptance criteria and showed almost no (<0.5% total) degradation under all storage conditions. No significant differences were seen between storage in glass vials or polypropylene/glass syringes. PSI reconstituted with LR and LR + D5W showed visual precipitation in many vials which was confirmed by the decrease in the HPLC assay values at all time points. The needlelike crystals (precipitate), analyzed by Infrared Spectroscopy and Scanning Electron Microscopy-Energy Dispersive Spectrometry (SEM-EDS) analyses, were identified as the free acid form of the active drug. PSI is stable after reconstitution, with NS, BNS, D5W, and D5W + 1/2NS, when stored at room temperature in glass vials or glass/plastic syringes for up to 48 h* LR and LR + D5W are not recommended for reconstitution because of crystallization of the drug (free acid).

Vitra-violet process for producing flame resistant polyamides and products produced thereby. [protective clothing for high oxygen environments

NASA Technical Reports Server (NTRS)

Toy, M. S.; Stringham, R. S. (Inventor)

1980-01-01

Aromatic polyamides with improved nonflammability characteristics are produced by contacting a polyamide substrate with a gaseous medium comprising a minor amount of a haloolefinic material and an inert diluent in the presence of light having sufficient energy to effect chemical addition of the haloolefin to the polyamide substrate.

21 CFR 70.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., mineral, or other source and that, when added or applied to a food, drug, or cosmetic or to the human body... intended function of which is to impart color to the human body is a color additive. For the purposes of... of the mixture in coloring foods, drugs, or cosmetics or in coloring the human body. The diluent may...

Hexadecyl ammonium chloride amylose inclusion complex to emulsify cedarwood oil and treat wood against termites and wood-decay fungi

USDA-ARS?s Scientific Manuscript database

Cedarwood oil (CWO) has a wide range of bioactivities, including insect repellency and toxicity as well as conferring resistance against termites and wood-rot fungi. In previous pressure treatment work, ethanol was used as the diluent/carrier for CWO. However, it is preferable to use a water-based ...

SOLVENT EXTRACTION OF URANIUM VALUES

DOEpatents

Feder, H.M.; Ader, M.; Ross, L.E.

1959-02-01

A process is presented for extracting uranium salt from aqueous acidic solutions by organic solvent extraction. It consists in contacting the uranium bearing solution with a water immiscible dialkylacetamide having at least 8 carbon atoms in the molecule. Mentioned as a preferred extractant is dibutylacetamide. The organic solvent is usually used with a diluent such as kerosene or CCl/sub 4/.

Effects of alternative cryoprotectants, diluents, straw size and cholesterol addition on cryopreserved rooster sperm

USDA-ARS?s Scientific Manuscript database

Rooster sperm do not cryopreserve well. This is due in part to osmotic changes that sperm undergo during addition and removal of cryoprotectant (CPA), as well as membrane damage during the membrane phase transition from fluid at 37 degrees C to gel at low temperatures. When a CPA is removed from spe...

21 CFR 74.1331 - D&C Red No. 31.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Color additive mixtures for drug use made with D&C Red No. 31 may contain only those diluents that are suitable and that are listed in part 73 of this chapter as safe for use in color additive mixtures for... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL LISTING OF COLOR...

Oxidative Lung Injury in Virus-Induced Wheezing

DTIC Science & Technology

2015-07-01

Biology (ASBMB) Annual meeting 2015 – Boston, MA, USA – Mar 30, 2015 b. Informatics such as databases and animal models, etc.: 1. We have generated a...manner. Mice were treated by gavage with 250 mg/kg body weight of BHA or corn oil (diluents for BHA) two days prior to RSV infection and during the first

Effects of in ovo injection of organic zinc, manganese, and copper on the hatchability and bone parameters of broiler hatchlings

USDA-ARS?s Scientific Manuscript database

Effects of the in ovo injection of commercial diluent containing supplemental microminerals (Zn, Mn, and Cu) on hatchability and hatching chick quality variables in Ross × Ross 708 broilers were examined. On 17 d of incubation (doi) eggs were subjected to 1 of 4 treatments using a commercial multi-e...

21 CFR 74.1334 - D&C Red No. 34.

Code of Federal Regulations, 2010 CFR

2010-04-01

... ADDITIVES SUBJECT TO CERTIFICATION Drugs § 74.1334 D&C Red No. 34. (a) Identity. (1) The color additive D&C...-carboxylic acid. (2) Color additive mixtures for drug use made with D&C Red No. 34 may contain only those diluents that are suitable and that are listed in part 73 of this chapter as safe for use in color additive...

Topical Hazard Evaluation Program of Candidate Insect Repellent AI3-30180-c, US Department of Agriculture Proprietary Chemical, April 1982 - September 1984.

DTIC Science & Technology

1985-01-10

irritation photochemical chemical and 10 percent reaction under test con- irritation in humans. (wlv) Oil of Bergamot ditions. 2 * - Study No. 75-51-0367-85...control (oil of Bergamot ), than unirradiated skin areas. a and diluent were applied to additional skin areas to serve as unirradiated control sites

40 CFR 75.71 - Specific provisions for monitoring NOX and heat input for the purpose of calculating NOX mass...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 17 2014-07-01 2014-07-01 false Specific provisions for monitoring NOX... MONITORING NOX Mass Emissions Provisions § 75.71 Specific provisions for monitoring NOX and heat input for...-diluent continuous emission monitoring system (consisting of a NOX pollutant concentration monitor, an O2...

40 CFR 75.71 - Specific provisions for monitoring NOX and heat input for the purpose of calculating NOX mass...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Specific provisions for monitoring NOX... MONITORING NOX Mass Emissions Provisions § 75.71 Specific provisions for monitoring NOX and heat input for...-diluent continuous emission monitoring system (consisting of a NOX pollutant concentration monitor, an O2...

40 CFR 75.71 - Specific provisions for monitoring NOX and heat input for the purpose of calculating NOX mass...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 17 2013-07-01 2013-07-01 false Specific provisions for monitoring NOX... MONITORING NOX Mass Emissions Provisions § 75.71 Specific provisions for monitoring NOX and heat input for...-diluent continuous emission monitoring system (consisting of a NOX pollutant concentration monitor, an O2...

Process for the extraction of strontium from acidic solutions

DOEpatents

Horwitz, E.P.; Dietz, M.L.

1994-09-06

The invention is a process for selectively extracting strontium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant solution is a macrocyclic polyether in an aliphatic hydrocarbon diluent containing a phase modifier. The process will selectively extract strontium values from nitric acid solutions which are up to 6 molar in nitric acid. 4 figs.

Method of fabricating n-type and p-type microcrystalline semiconductor alloy material including band gap widening elements

DOEpatents

Guha, Subhendu; Ovshinsky, Stanford R.

1990-02-02

A method of fabricating doped microcrystalline semiconductor alloy material which includes a band gap widening element through a glow discharge deposition process by subjecting a precursor mixture which includes a diluent gas to an a.c. glow discharge in the absence of a magnetic field of sufficient strength to induce electron cyclotron resonance.

Phase 1 Study of Safety and Immunogenicity of an Escherichia coli-Derived Recombinant Protective Antigen (rPA) Vaccine to Prevent Anthrax in Adults

DTIC Science & Technology

2010-11-05

AVA sera AVR801, kindly provided by Conrad Quinn, CDC, Atlanta, GA), serum samples and controls were diluted in serum diluent (5% skim milk in PBS...previously published assays [17]. Briefly, whole blood was collected in acid citrate dextrose (ACD) citrate tubes and PBMC were separated by ficoll

Process for the extraction of strontium from acidic solutions

DOEpatents

Horwitz, E. Philip; Dietz, Mark L.

1994-01-01

The invention is a process for selectively extracting strontium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant solution is a macrocyclic polyether in an aliphatic hydrocarbon diluent containing a phase modifier. The process will selectively extract strontium values from nitric acid solutions which are up to 6 molar in nitric acid.

40 CFR 180.910 - Inert ingredients used pre- and post-harvest; exemptions from the requirement of a tolerance.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Solvent Kaolinite-type clay Solid diluent, carrier Lactic acid Solvent Lactic acid, 2-ethylhexyl ester (CAS Reg. No. 6283-86-9) Solvent Lactic acid, 2-ethylhexyl ester, (2S)- (CAS Reg. No. 186817-80-1) Solvent Lactic acid, n-propyl ester, (S); (CAS Reg. No. 53651-69-7) Solvent Lauryl alcohol Surfactant...

Influence of host plants and soil diluents on arbuscular mycorrhizal fungus propagation for on-farm inoculum production using leaf litter compost and agrowastes

USDA-ARS?s Scientific Manuscript database

Arbuscular mycorrhizal (AM) fungi (Claroideoglomus etunicatum NNT10, C. etunicatum PBT03 and Funneliformis mosseae RYA08) were propagated using different culture materials (sterile sandy soil by itself or mixed 1:1 (v/v) with clay-brick granules, rice husk charcoal, or vermiculite) and host plants (...

Alkaline earth cation extraction from acid solution

DOEpatents

Dietz, Mark; Horwitz, E. Philip

2003-01-01

An extractant medium for extracting alkaline earth cations from an aqueous acidic sample solution is described as are a method and apparatus for using the same. The separation medium is free of diluent, free-flowing and particulate, and comprises a Crown ether that is a 4,4'(5')[C.sub.4 -C.sub.8 -alkylcyclohexano]18-Crown-6 dispersed on an inert substrate material.

40 CFR 60.4335 - How do I demonstrate compliance for NOX if I use water or steam injection?

Code of Federal Regulations, 2011 CFR

2011-07-01

... monitor and record the fuel consumption and the ratio of water or steam to fuel being fired in the turbine... continuous emission monitoring system (CEMS) consisting of a NOX monitor and a diluent gas (oxygen (O2) or... rate, temperature, and pressure, to continuously measure the total thermal energy output in British...

40 CFR 60.4335 - How do I demonstrate compliance for NOX if I use water or steam injection?

Code of Federal Regulations, 2014 CFR

2014-07-01

... monitor and record the fuel consumption and the ratio of water or steam to fuel being fired in the turbine... continuous emission monitoring system (CEMS) consisting of a NOX monitor and a diluent gas (oxygen (O2) or... rate, temperature, and pressure, to continuously measure the total thermal energy output in British...

40 CFR 60.4335 - How do I demonstrate compliance for NOX if I use water or steam injection?

Code of Federal Regulations, 2010 CFR

2010-07-01

... monitor and record the fuel consumption and the ratio of water or steam to fuel being fired in the turbine... continuous emission monitoring system (CEMS) consisting of a NOX monitor and a diluent gas (oxygen (O2) or... rate, temperature, and pressure, to continuously measure the total thermal energy output in British...

40 CFR 60.4335 - How do I demonstrate compliance for NOX if I use water or steam injection?

Code of Federal Regulations, 2012 CFR

2012-07-01

... monitor and record the fuel consumption and the ratio of water or steam to fuel being fired in the turbine... continuous emission monitoring system (CEMS) consisting of a NOX monitor and a diluent gas (oxygen (O2) or... rate, temperature, and pressure, to continuously measure the total thermal energy output in British...

40 CFR 60.4335 - How do I demonstrate compliance for NOX if I use water or steam injection?

Code of Federal Regulations, 2013 CFR

2013-07-01

... monitor and record the fuel consumption and the ratio of water or steam to fuel being fired in the turbine... continuous emission monitoring system (CEMS) consisting of a NOX monitor and a diluent gas (oxygen (O2) or... rate, temperature, and pressure, to continuously measure the total thermal energy output in British...

PLUTONIUM-ZIRCONIUM ALLOYS

DOEpatents

Schonfeld, F.W.; Waber, J.T.

1960-08-30

A series of nuclear reactor fuel alloys consisting of from about 5 to about 50 at.% zirconium (or higher zirconium alloys such as Zircaloy), balance plutonium, and having the structural composition of a plutonium are described. Zirconium is a satisfactory diluent because it alloys readily with plutonium and has desirable nuclear properties. Additional advantages are corrosion resistance, excellent fabrication propenties, an isotropie structure, and initial softness.

Process for the extraction of strontium from acidic solutions

DOEpatents

Horwitz, E.P.; Dietz, M.L.

1993-01-01

The invention is a process for selectively extracting strontium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant solution is a macrocyclic polyether in an aliphatic hydrocarbon diluent containing a phase modifier. The process will selectively extract strontium values from nitric acid solutions which are up to 6 molar in nitric acid.

21 CFR 74.1334 - D&C Red No. 34.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ADDITIVES SUBJECT TO CERTIFICATION Drugs § 74.1334 D&C Red No. 34. (a) Identity. (1) The color additive D&C...-carboxylic acid. (2) Color additive mixtures for drug use made with D&C Red No. 34 may contain only those diluents that are suitable and that are listed in part 73 of this chapter as safe for use in color additive...

21 CFR 74.1334 - D&C Red No. 34.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ADDITIVES SUBJECT TO CERTIFICATION Drugs § 74.1334 D&C Red No. 34. (a) Identity. (1) The color additive D&C...-carboxylic acid. (2) Color additive mixtures for drug use made with D&C Red No. 34 may contain only those diluents that are suitable and that are listed in part 73 of this chapter as safe for use in color additive...

21 CFR 74.1334 - D&C Red No. 34.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ADDITIVES SUBJECT TO CERTIFICATION Drugs § 74.1334 D&C Red No. 34. (a) Identity. (1) The color additive D&C...-carboxylic acid. (2) Color additive mixtures for drug use made with D&C Red No. 34 may contain only those diluents that are suitable and that are listed in part 73 of this chapter as safe for use in color additive...

Water-Base Coatings

DTIC Science & Technology

1974-11-01

reacted with hydroxypropyl methacrylate and 1-butanol modifier in butyl acrylate -isobutyl methacrylate reactive diluent mixture using dibutyltin dilaurate...disadvantages are: 1. only a few commercial systems (e. g., acrylic resins ) are available; 2. after application, the polymer must somehow be insolubilized...a bisphenol in the presence of an emulsifier and a water-miscible solvent (9); 2. emulsification of an epoxy resin -amine curing agent mixture , e.g

Easy fix for clinical laboratories for the false-positive defect with the Abbott AxSym total beta-hCG test.

PubMed

Cole, Laurence A; Khanlian, Sarah A

2004-05-01

False-positive hCG results can lead to erroneous diagnoses and needless chemotherapy and surgery. In the last 2 years, eight publications described cases involving false-positive hCG tests; all eight involved the AxSym test. We investigated the source of this abundance of cases and a simple fix that may be used by clinical laboratories. False-positive hCG was primarily identified by absence of hCG in urine and varying or negative hCG results in alternative tests. Seventeen false-positive serum samples in the AxSym test were evaluated undiluted and at twofold dilution with diluent containing excess goat serum or immunoglobulin. We identified 58 patients with false-positive hCG, 47 of 58 due to the Abbott AxSym total hCGbeta test (81%). Sixteen of 17 of these "false-positive" results (mean 100 mIU/ml) became undetectable when tested again after twofold dilution. A simple twofold dilution with this diluent containing excess goat serum or immunoglobulin completely protected 16 of 17 samples from patients having false-positive results. It is recommended that laboratories using this test use twofold dilution as a minimum to prevent false-positive results.

Double layer, diluent and anode effects upon the electrodeposition of aluminium from chloroaluminate based ionic liquids.

PubMed

Abbott, Andrew P; Qiu, Fulian; Abood, Hadi M A; Ali, M Rostom; Ryder, Karl S

2010-02-28

The deposition of aluminium from a chloroaluminate based ionic liquid was studied to elucidate the effect of a diluent (toluene) and electrolyte (LiCl) on the deposit morphology. A wide variety of analytical techniques was applied to this system to determine the speciation and mechanism of material growth. These included: (27)Al NMR, FAB-MS, cyclic voltammetry, chronocoulometry, chronopotentiometry, scanning electron microscopy and atomic force microscopy. It was found that under-potential deposition (upd) causes a change in the way in which metal grows on the electrode surface. Metal grows in two regimes which are believed to be nano-material and bulk material. The addition of toluene causes a change in speciation and a decrease in upd which in turn changes the morphology of the deposit obtained and can lead to mirror finish aluminium. The addition of LiCl has the opposite effect encouraging upd and leading to larger crystallites and a dark grey deposit. It is also shown for the first time that under many conditions the rate of the anodic dissolution process is overall rate controlling and one effect of the addition of toluene is to increase the rate of anodic dissolution.

Identification of isopropylbiphenyl, alkyl diphenylmethanes, diisopropylnaphthalene, linear alkyl benzenes and other polychlorinated biphenyl replacement compounds in effluents, sediments and fish in the Fox River System, Wisconsin

USGS Publications Warehouse

Peterman, Paul H.; Delfino, Joseph J.

1990-01-01

Five polychlorinated biphenyl replacement dye solvents and a diluent present in carbonless copy paper were identified by gas chromatography/mass spectrometry in the following matrices: effluents from a de-inking–recycling paper mill and a municipal wastewater treatment plant receiving wastewaters from a carbonless copy paper manufacturing plant; sediments; and fish collected near both discharges in the Fox River System, Wisconsin. An isopropylbiphenyl dye solvent mixture included mono-, di- and triisopropylbiphenyls. Also identified were two dye solvent mixtures marketed under the trade name Santosol. Santosol 100 comprised ethyl-diphenylmethanes (DPMs), benzyl-ethyl-DPMs, and dibenzyl-ethyl-DPMs. Similarly, Santosol 150 comprised dimethyl-DPMs, benzyl-dimethyl-DPMs, and dibenzyl-dimethyl-DPMs. Diisopropylnaphthalenes, widely used as a dye solvent in Japan, were identified for the first time in the US environment. sec-Butylbiphenyls and di-sec-butylbiphenyls, likely constituents of a sec-butylbiphenyl dye solvent mixture, were tentatively identified. Linear alkyl benzenes (C10 to C13-LABs) constituted the Alkylate 215 diluent mixture. Although known to occur as minor constituents in linear alkyl sulfonate detergents, LAB residues have not been previously attributed to commercial use of LABs.

The monitoring of organic waste pollution in the sibelis river

NASA Astrophysics Data System (ADS)

Huda, Thorikul; Jannah, Wirdatul

2017-03-01

Has conducted monitoring of organic waste pollution in the River Sibelis of Tegal City of Central Java. Organic wastes that pollute River Sibelis can degrade the quality of well water along the river. Monitoring carried out in the upstream and downstream by chemical oxygen demand (COD) and biochemical oxygen demand (BOD) parameters. COD test methods by titration and the results are used to determine the test sample comparison with the volume of diluent required for analysts BOD. COD test results on the upstream and downstream Sibelis River respectively 58.13 mg/L and 73.97 mg / L so that the ratio of the test sample with diluent volume for BOD analysis is 20: 280 (Sawyer, 1978). BOD test principle is based on the reduction of dissolved oxygen zero day (DO0) and five days (DO5). The result of observation BOD samples at upstream and downstream Sibelis Rivers are 10.7212 mg / L and 5.3792 mg / L respectively. Quality control of BOD testing conducted with measurement accuracy and precision and obtained result are 85.36% and 0.27% respectively. The result of uncertainty measurement for BOD testing at upstream and downstream are ±0.4469 mg/L and ±0.22188 mg/L.

A New Emulsion Liquid Membrane Based on a Palm Oil for the Extraction of Heavy Metals

PubMed Central

Björkegren, Sanna; Fassihi Karimi, Rose; Martinelli, Anna; Jayakumar, Natesan Subramanian; Hashim, Mohd Ali

2015-01-01

The extraction efficiency of hexavalent chromium, Cr(VI), from water has been investigated using a vegetable oil based emulsion liquid membrane (ELM) technique. The main purpose of this study was to create a novel ELM formulation by choosing a more environmentally friendly and non-toxic diluent such as palm oil. The membrane phase so formulated includes the mobile carrier tri-n-octylmethylammonium chloride (TOMAC), to facilitate the metal transport, and the hydrophilic surfactant Tween 80 to facilitate the dispersion of the ELM phase in the aqueous solution. Span 80 is used as surfactant and butanol as co-surfactant. Our results demonstrate that this novel ELM formulation, using the vegetable palm oil as diluent, is useful for the removal of hexavalent chromium with an efficiency of over 99% and is thus competitive with the already existing, yet less environmentally friendly, ELM formulations. This result was achieved with an optimal concentration of 0.1 M NaOH as stripping agent and an external phase pH of 0.5. Different water qualities have also been investigated showing that the type of water (deionized, distilled, or tap water) does not significantly influence the extraction rate. PMID:25915191

The behaviour of tributyl phosphate in an organic diluent

NASA Astrophysics Data System (ADS)

Leay, Laura; Tucker, Kate; Del Regno, Annalaura; Schroeder, Sven L. M.; Sharrad, Clint A.; Masters, Andrew J.

2014-09-01

Tributyl phosphate (TBP) is used as a complexing agent in the Plutonium Uranium Extraction (PUREX) liquid-liquid phase extraction process for recovering uranium and plutonium from spent nuclear reactor fuel. Here, we address the molecular and microstructure of the organic phases involved in the extraction process, using molecular dynamics to show that when TBP is mixed with a paraffinic diluent, the TBP self-assembles into a bi-continuous phase. The underlying self-association of TBP is driven by intermolecular interaction between its polar groups, resulting in butyl moieties radiating out into the organic solvent. Simulation predicts a TBP diffusion constant that is anomalously low compared to what might normally be expected for its size; experimental nuclear magnetic resonance (NMR) studies also indicate an extremely low diffusion constant, consistent with a molecular aggregation model. Simulation of TBP at an oil/water interface shows the formation of a bilayer system at low TBP concentrations. At higher concentrations, a bulk bi-continuous structure is observed linking to this surface bilayer. We suggest that this structure may be intimately connected with the surprisingly rapid kinetics of the interfacial mass transport of uranium and plutonium from the aqueous to the organic phase in the PUREX process.

[Physical and mechanical properties of the thermosetting resin for crown and bridge cured by micro-wave heating].

PubMed

Kaneko, K

1989-09-01

A heating method using micro-waves was utilized to obtain strong thermosetting resin for crown and bridge. The physical and mechanical properties of the thermosetting resin were examined. The resin was cured in a shorter time by the micro-waves heating method than by the conventional heat curing method and the working time was reduced markedly. The base resins of the thermosetting resin for crown and bridge for the micro-waves heating method were 2 PA and diluent 3 G. A compounding volume of 30 wt% for diluent 3 G was considered good the results of compressive strength, bending strength and diametral tensile strength. Grams of 200-230 of the filler compounded to the base resins of 2 PA-3 G system provided optimal compressive strength, bending strength and diametral tensile strength. A filler gram of 230 provided optimal hardness and curing shrinkage rate, the coefficient of thermal expansion became smaller with the increase of the compounding volume of the filler. The trial thermosetting resin for crown and bridge formed by the micro-waves heating method was not inferior to the conventional resin by the heat curing method or the light curing method.

Cesium and strontium extraction using a mixed extractant solvent including crown ether and calixarene extractants

DOEpatents

Meikrantz, David H.; Todd, Terry A.; Riddle, Catherine L.; Law, Jack D.; Peterman, Dean R.; Mincher, Bruce J.; McGrath, Christopher A.; Baker, John D.

2007-11-06

A mixed extractant solvent including calix[4]arene-bis-(tert-octylbenzo)-crown-6 ("BOBCalixC6"), 4',4',(5')-di-(t-butyldicyclo-hexano)-18-crown-6 ("DtBu18C6"), and at least one modifier dissolved in a diluent. The mixed extractant solvent may be used to remove cesium and strontium from an acidic solution. The DtBu18C6 may be present from approximately 0.01 M to approximately 0.4M, such as from approximately 0.086 M to approximately 0.108 M. The modifier may be 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol ("Cs-7SB") and may be present from approximately 0.01M to approximately 0.8M. In one embodiment, the mixed extractant solvent includes approximately 0.15M DtBu18C6, approximately 0.007M BOBCalixC6, and approximately 0.75M Cs-7SB modifier dissolved in an isoparaffinic hydrocarbon diluent. The mixed extractant solvent may form an organic phase in an extraction system that also includes an aqueous phase. Methods of extracting cesium and strontium as well as strontium alone are also disclosed.

Design Space Approach in Optimization of Fluid Bed Granulation and Tablets Compression Process

PubMed Central

Djuriš, Jelena; Medarević, Djordje; Krstić, Marko; Vasiljević, Ivana; Mašić, Ivana; Ibrić, Svetlana

2012-01-01

The aim of this study was to optimize fluid bed granulation and tablets compression processes using design space approach. Type of diluent, binder concentration, temperature during mixing, granulation and drying, spray rate, and atomization pressure were recognized as critical formulation and process parameters. They were varied in the first set of experiments in order to estimate their influences on critical quality attributes, that is, granules characteristics (size distribution, flowability, bulk density, tapped density, Carr's index, Hausner's ratio, and moisture content) using Plackett-Burman experimental design. Type of diluent and atomization pressure were selected as the most important parameters. In the second set of experiments, design space for process parameters (atomization pressure and compression force) and its influence on tablets characteristics was developed. Percent of paracetamol released and tablets hardness were determined as critical quality attributes. Artificial neural networks (ANNs) were applied in order to determine design space. ANNs models showed that atomization pressure influences mostly on the dissolution profile, whereas compression force affects mainly the tablets hardness. Based on the obtained ANNs models, it is possible to predict tablet hardness and paracetamol release profile for any combination of analyzed factors. PMID:22919295

EFFECT OF THE LESION DUE TO INFLUENZA VIRUS ON THE RESISTANCE OF MICE TO INHALED PNEUMOCOCCI

PubMed Central

Harford, Carl G.; Leidler, Virginia; Hara, Mary

1949-01-01

1. The normal lung of the mouse possesses the power of reducing markedly its content of Type I pneumococci within 3 hours after inhalation of the organisms in the form of fine droplets. 2. Lungs with fully developed influenza viral pneumonia not only fail to reduce the pulmonary content of pneumococci administered in this manner but, on the contrary, support their growth. 3. After intrabronchial inoculation into mice, influenza virus multiplies rapidly in the lung within 24 hours. 4. Criteria have been established for distinction between true viral lesions of the lung and changes due to the inoculation of diluents as vehicles for the virus. 5. 24 hours after inoculation of virus, there are no macroscopic lesions in the lung and the microscopic changes are due to the diluent. 6. Presence and multiplication of the virus in the lung 24 hours after inoculation have no apparent effect on the power of the lung to reduce rapidly its content of inhaled pneumococci. 7. The effect of the virus in lowering resistance to secondary bacterial infection appears to be due to the presence of the lesion produced by the virus. PMID:18099165

Formation of alveoli in rats: postnatal effect of prenatal dexamethasone.

PubMed

Massaro, G D; Massaro, D

1992-07-01

We administered a glucocorticosteroid (dexamethasone) or its diluent to pregnant rats on gestation days 17, 18, and 19. In male offspring we determined the lung's gas exchange surface area (S(a)), the average volume (v) of gas exchange saccules at age 2 days and alveoli at age 14 days, and their number (N) on these days. S(a), v, and N at 2 days and v at 14 days were not affected by the prenatal administration of dexamethasone. However, S(a) and N were lower in 14-day-old pups from dexamethasone-treated dams than in pups from diluent-treated dams. In separate experiments we found the responsiveness to prenatal dexamethasone, as a depressor of the postnatal increase in S(a), appeared earlier in female than male fetuses; it was present in female but not in male fetuses on days 16-18 and was found in male fetuses on days 17-19. We conclude 1) prenatal administration of dexamethasone diminishes the postnatal increase in S(a), 2) responsiveness to this action of dexamethasone occurs earlier in gestation in female than in male fetuses, and 3) prenatal dexamethasone does not effect the postnatal volume of an average alveolus but diminishes their number in male pups.

Investigation of aggregation in solvent extraction of lanthanides by acidic extractants (organophosphorus and naphthenic acid)

USGS Publications Warehouse

Zhou, N.; Wu, J.; Yu, Z.; Neuman, R.D.; Wang, D.; Xu, G.

1997-01-01

Three acidic extractants (I) di(2-ethylhexyl) phosphoric acid (HDEHP), (II) 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (HEHPEHE) and (III) naphthenic acid were employed in preparing the samples for the characterization of the coordination structure of lanthanide-extractant complexes and the physicochemical nature of aggregates formed in the organic diluent of the solvent extraction systems. Photo correlation spectroscopy (PCS) results on the aggregates formed by the partially saponified HDEHP in n-heptane showed that the hydrodynamic radius of the aggregates was comparable to the molecular dimensions of HDEHP. The addition of 2-octanol into the diluent, by which the mixed solvent was formed, increased the dimensions of the corresponding aggregates. Aggregates formed from the lanthanide ions and HDEHP in the organic phase of the extraction systems were found very unstable. In the case of naphthenic acid, PCS data showed the formation of w/o microemulsion from the saponified naphthenic acid in the mixed solvent. The extraction of lanthanides by the saponified naphthenic acid in the mixed solvent under the given experimental conditions was a process of destruction of the w/o microemulsion. A possible mechanism of the breakdown of the w/o microemulsion droplets is discussed.

Comparison of different extenders on the recovery and longevity of epididymal sperm from Spix's yellow-toothed cavies (Galea spixii Wagler, 1831).

PubMed

da Silva, Andréia Maria; Sousa, Patrícia Cunha; Campos, Lívia Batista; Bezerra, José Artur Brilhante; de Araújo Lago, Arthur Emannuel; de Oliveira, Moacir Franco; Silva, Alexandre Rodrigues

2017-04-01

The aim of this study was to evaluate the performance of cavy (Galea spixii) epididymal sperm following addition to TES or TRIS extenders and using a thermal resistance test (TRT), as well as fluorescence analysis as a complementary method to predict the viability of these gametes. Nine testicle-epididymis complexes were used for sperm collection using a flotation method. Epididymis tails were sliced and one was immersed in 3 ml of TRIS buffer, and the other in 3 ml of TES, for 5 min. After sperm recovery, the samples were subjected to a TRT which involved incubation in a water bath at 37°C for 3 h. During incubation, sample parameters were assessed at 0, 15, 30, 60, 90, 120, 150 or 180 min intervals. Results indicated that the TRIS diluent was more efficient than TES (P < 0.05) for the maintenance of sperm parameters in Spix's yellow-toothed cavies over the whole TRT, maintaining sperm longevity for an extended time. In conclusion, we indicate the use of TRIS diluent for recovery and maintenance of longevity of epididymal sperm from cavies (G. spixii).

Combustion method for producing fullerenes

DOEpatents

Howard, Jack B.; McKinnon, J. Thomas

1993-01-01

A method for synthesizing fullerenes in flames is provided. Fullerenes are prepared by burning carbon-containing compounds in a flame and collecting the condensibles. The condensibles contain the desired fullerenes. Fullerene yields can be optimized and fullerene composition can be selectively varied. Fullerene yields and compositions are determined by selectively controlling flame conditions and parameters such as C/O ratio, pressure, temperature, residence time, diluent concentration and gas velocity.

40 CFR 75.71 - Specific provisions for monitoring NOX and heat input for the purpose of calculating NOX mass...

Code of Federal Regulations, 2011 CFR

2011-07-01

... and heat input for the purpose of calculating NOX mass emissions. 75.71 Section 75.71 Protection of... MONITORING NOX Mass Emissions Provisions § 75.71 Specific provisions for monitoring NOX and heat input for... and for a flow monitoring system and an O2 or CO2 diluent gas monitoring system to measure heat input...

Combined transuranic-strontium extraction process

DOEpatents

Horwitz, E.P.; Dietz, M.L.

1992-12-08

The transuranic (TRU) elements neptunium, plutonium and americium can be separated together with strontium from nitric acid waste solutions in a single process. An extractant solution of a crown ether and an alkyl(phenyl)-N,N-dialkylcarbanylmethylphosphine oxide in an appropriate diluent will extract the TRU's together with strontium, uranium and technetium. The TRU's and the strontium can then be selectively stripped from the extractant for disposal. 3 figs.

Leishmania Skin Test

DTIC Science & Technology

2010-03-01

LtSTA. Unlike local AE where the reaction site can be identified with a specific article , it was not possible to identify the article responsible...taken prior to the last centrifugation step to determine yield (cell concentration), bioburden and morphology. The final centrifugation run is...protein and phenol may be made one time with 1X phosphate diluent. Bioburden is tested after any adjustment is made and prior to sterile filtration

Combustor nozzle for a fuel-flexible combustion system

DOEpatents

Haynes, Joel Meier [Niskayuna, NY; Mosbacher, David Matthew [Cohoes, NY; Janssen, Jonathan Sebastian [Troy, NY; Iyer, Venkatraman Ananthakrishnan [Mason, OH

2011-03-22

A combustor nozzle is provided. The combustor nozzle includes a first fuel system configured to introduce a syngas fuel into a combustion chamber to enable lean premixed combustion within the combustion chamber and a second fuel system configured to introduce the syngas fuel, or a hydrocarbon fuel, or diluents, or combinations thereof into the combustion chamber to enable diffusion combustion within the combustion chamber.

Comparing Soy Flour Wood Adhesives to Purified Soy Protein Adhesives

Treesearch

Charles R. Frihart; Linda F. Lorenz

2013-01-01

While economics dictate that soy-based wood adhesives be made with soy flour, much of the recent literature on soy-based wood adhesives has involved using soy protein isolate. The obvious assumption is that the additional carbohydrates in the flour but not in the isolate only serve as inert diluents. Our studies have shown that the isolate can provide 10 times the wet...

Methods for deoxygenating biomass-derived pyrolysis oil

DOEpatents

Brandvold, Timothy A.

2015-07-14

Methods for deoxygenating a biomass-derived pyrolysis oil are provided. A method comprising the steps of diluting the biomass-derived pyrolysis oil with a phenolic-containing diluent to form a diluted pyoil-phenolic feed is provided. The diluted pyoil-phenolic feed is contacted with a deoxygenating catalyst in the presence of hydrogen at hydroprocessing conditions effective to form a low-oxygen biomass-derived pyrolysis oil effluent.

Combined transuranic-strontium extraction process

DOEpatents

Horwitz, E. Philip; Dietz, Mark L.

1992-01-01

The transuranic (TRU) elements neptunium, plutonium and americium can be separated together with strontium from nitric acid waste solutions in a single process. An extractant solution of a crown ether and an alkyl(phenyl)-N,N-dialkylcarbanylmethylphosphine oxide in an appropriate diluent will extract the TRU's together with strontium, uranium and technetium. The TRU's and the strontium can then be selectively stripped from the extractant for disposal.

Surface Coverage and Structure of Mixed DNA/Alkylthiol Monolayers on Gold: Characterization by XPS, NEXAFS, and Fluorescence Intensity Measurements

PubMed Central

Lee, Chi-Ying; Gong, Ping; Harbers, Gregory M.; Grainger, David W.; Castner, David G.; Gamble, Lara J.

2006-01-01

Self-assembly of thiol-terminated single-stranded DNA (HS-ssDNA) on gold has served as an important model system for DNA immobilization at surfaces. Here, we report a detailed study of the surface composition and structure of mixed self-assembled DNA monolayers containing a short alkylthiol surface diluent [11-mercapto-1-undecanol (MCU)] on gold supports. These mixed DNA monolayers were studied with X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), and fluorescence intensity measurements. XPS results on sequentially adsorbed DNA/MCU monolayers on gold indicated that adsorbed MCU molecules first incorporate into the HS-ssDNA monolayer and, upon longer MCU exposures, displace adsorbed HS-ssDNA molecules from the surface. Thus, HS-ssDNA surface coverage steadily decreased with MCU exposure time. Polarization-dependent NEXAFS and fluorescence results both show changes in signals consistent with changes in DNA orientation after only 30 min of MCU exposure. NEXAFS polarization dependence (followed by monitoring the N 1s → π* transition) of the mixed DNA monolayers indicated that the DNA nucleotide base ring structures are oriented more parallel to the gold surface compared to DNA bases in pure HS-ssDNA monolayers. This indicates that HS-ssDNA oligomers reorient toward a more-upright position upon MCU incorporation. Fluorescence intensity results using end-labeled DNA probes on gold show little observable fluorescence on pure HS-ssDNA monolayers, likely due to substrate quenching effects between the fluorophore and the gold. MCU diluent incorporation into HS-ssDNA monolayers initially increases DNA fluorescence signal by densifying the chemisorbed monolayer, prompting an upright orientation of the DNA, and moving the terminal fluorophore away from the substrate. Immobilized DNA probe density and DNA target hybridization in these mixed DNA monolayers, as well as effects of MCU diluent on DNA hybridization in complex milieu (i.e., serum) were characterized by surface plasmon resonance (SPR) and 32P-radiometric assays and reported in a related study PMID:16689533

Layer chicken embryo survival to hatch when administered an in ovo vaccination of strain F Mycoplasma gallisepticum and locations of bacteria prevalence in the newly hatched chick.

PubMed

Elliott, K E C; Branton, S L; Evans, J D; Gerard, P D; Peebles, E D

2017-09-01

Mycoplasma gallisepticum (MG) is a bacterial pathogen that causes production losses in layer chickens. To combat MG, multiage layer facilities vaccinate pullets by either spray or eye-drop vaccination. The objective in this study was to evaluate the use of in ovo vaccination as a potential alternative for MG vaccination. Layer embryos at 18 d of incubation were either not-injected (control), or were hand-injected with either commercial Marek's disease vaccine diluent alone or with a high, medium, low, or very low dosage of a live attenuated strain F (FMG) vaccine suspended in the commercial diluent. Hatch success and residual egg embryonic mortality were determined after 23 d of incubation. Six hatched chicks per treatment were swabbed for the detection of FMG at 4 different sites (trachea, mouth and esophagus, yolk sac membrane, and the lumen of the duodenal loop) via real-time PCR. Embryos were found to be administered 106 CFU per dose in the high treatment, 104 CFU/dose in the medium treatment, 102 CFU/dose in the low treatment, and between 5.06 and 5.93 CFU/dose in the very low treatment. Hatch of embryonated eggs was decreased by the medium and high doses (P = 0.02). These embryos died while pipping. No FMG was detected in the control and diluent-injected chicks. In the FMG treatments, FMG was found in all sites and dosages, with a greater number of positive chicks found in the higher FMG dosage treatments. These findings indicate the potential practicality of vaccinating layer embryos with FMG by in ovo injection based on the observed hatch success at lower dosages. Also, once injected into the amnion, the bacteria are present in the upper respiratory and gastrointestinal tracts as well the yolk sac membrane and the small intestine of hatchlings. Future research will need to ascertain the effects of FMG administered by in ovo injection on posthatch immunity and mortality. © 2017 Poultry Science Association Inc.

The viability of probiotics in water, breast milk, and infant formula.

PubMed

Watkins, Claire; Murphy, Kiera; Dempsey, Eugene M; Murphy, Brendan P; O'Toole, Paul W; Paul Ross, R; Stanton, Catherine; Anthony Ryan, C

2018-06-01

The aim of this study was to determine bacteriological stability of a probiotic mixture dispersed in various diluents. The commercially available probiotic (Infloran®), containing Bifidobacterium bifidum (10 9  CFU/250 mg tablet) and Lactobacillus acidophilus (10 9  CFU/250 mg tablet), was dispersed within expressed breast milk, sterile water, and infant formula and examined at temperatures of 4 and 21 °C. When stored at 4 °C, significant decreases (P < 0.05) in the level of L. acidophilus and B. bifidum were observed in expressed breast milk and sterile water after a 6-h period. However, when stored in infant formula, both strains remained stable over a 12-h period. When stored at 21 °C, a significant decrease (P < 0.05) was observed in the level of L. acidophilus in sterile water, expressed breast milk and infant formula throughout a 12-h period. However, no significant decrease was observed overtime in B. bifidum in all three diluents at this temperature. Our findings suggest that, when stored at 4 °C, this probiotic product can remain at a stable condition for 6 h in sterile water and infant formula; however, the viability of the probiotic decreases significantly after this period of time. Administration of this probiotic in sterile water can be an acceptable alternative to dispersion and administration in expressed breast milk. What is Known: • Administration of probiotics containing lactobacilli and bifidobacteria has become more widespread in neonatology, mainly as prophylaxis for the prevention of necrotising entercolitis in preterm infants. • Probiotic reconstitution, from its powder base, is not standardized and various diluents, including sterile water, breast milk, and infant formula, have been used. What is New: • When stored at 4 °C, a probiotic containing lactobacilli and bifidobacteria remains at a stable microbological condition for up to 6 h in sterile water. • Administration of this probiotic dispersed in sterile water, followed by an EBM feed, can be an acceptable alternative to dispersion and administration in EBM.

Bombus terrestris as pollinator-and-vector to suppress Botrytis cinerea in greenhouse strawberry.

PubMed

Mommaerts, Veerle; Put, Kurt; Smagghe, Guy

2011-09-01

Bombus terrestris L. bumblebees are widely used as commercial pollinators, but they might also be of help in the battle against economically important crop diseases. This alternative control strategy is referred to as pollinator-and-vector technology. The present study was designed to investigate the capacity of B. terrestris to fulfil this role in greenhouse strawberry flowers, which were manually inoculated with a major plant pathogen, the grey mould Botrytis cinerea Pers.: Fr. A model microbiological control agent (MCA) product Prestop-Mix was loaded in a newly developed two-way bumblebee dispenser, and, in addition, the use of the diluent Maizena-Plus (corn starch) was tested. Importantly, loading of the MCA caused no adverse effects on bumblebee workers, with no loss of survival or impairment of flight activity of the workers during the 4 week flowering period. Secondly, vectoring of Prestop-Mix by bumblebees resulted in a higher crop production, as 71% of the flowers developed into healthy red strawberries at picking (preharvest yield) as compared with 54% in the controls. In addition, these strawberries were better protected, as 79% of the picked berries remained free of B. cinerea after a 2 day incubation (post-harvest yield), while this percentage was only 43% in the control. Overall, the total yield (preharvest × post-harvest) was 2-2.5 times higher than the total yield in the controls (24%) in plants exposed to bumblebees vectoring Prestop-Mix. Thirdly, the addition of the diluent Maizena-Plus to Prestop-Mix at 1:1 (w/w) resulted in a similar yield to that of Prestop-Mix used alone, and in no negative effects on the bumblebees, flowers and berries. This greenhouse study provides strong evidence that B. terrestris bumblebees can vector a MCA to reduce B. cinerea incidence in greenhouse strawberries, resulting in higher yields. Similar yields obtained in the treatments with Prestop-Mix and Prestop-Mix + Maizena-Plus suggest an equally efficient dissemination of the biocontrol agent into the flowers with only half the initial concentration of Prestop-Mix, which illustrates the importance of the diluent. Copyright © 2011 Society of Chemical Industry.

Combustion method for producing fullerenes

DOEpatents

Howard, J.B.; McKinnon, J.T.

1993-12-28

A method for synthesizing fullerenes in flames is provided. Fullerenes are prepared by burning carbon-containing compounds in a flame and collecting the condensable. The condensable contain the desired fullerenes. Fullerene yields can be optimized and fullerene composition can be selectively varied. Fullerene yields and compositions are determined by selectively controlling flame conditions and parameters such as C/O ratio, pressure, temperature, residence time, diluent concentration and gas velocity. 4 figures.

Development of a Dosimeter System for Unsymmetrical Dimethylhydrazine, Monomethylhydrazine and Hydrazine

DTIC Science & Technology

1994-06-27

the amount of dilution air . Conditioned house- compressed air was used as the diluent. The conditioning procedure consisted of passing the house air ...unsymmetrical dlmethylhydrazine (UDMI-) in air has been developed. The dosimeter consists of a replaceable dosimeter card and a reusable...Department of Defense and NASA require air monitoring for hydrazines in areas where they are handled and/or stored. A real-time dosimeter using vanillin

Process for the recovery of strontium from acid solutions

DOEpatents

Horwitz, E. Philip; Dietz, Mark L.

1992-01-01

The invention is a process for selectively extracting strontium and technetium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant is a macrocyclic polyether in a diluent which is insoluble in water, but which will itself dissolve a small amount of water. The process will extract strontium and technetium values from nitric acid solutions which are up to 6 molar in nitric acid.

Hexadecyl ammonium chloride amylose inclusion complex to emulsify cedarwood oil and treat wood against termites and wood-decay fungi

Treesearch

F.J. Eller; W.T. Hay; G.T. Kirker; M.E. Mankowski; G.W. Sellling

2018-01-01

Cedarwood oil (CWO) has a wide range of bioactivities, including insect repellency and toxicity, as well as conferring resistance against termites and wood-decay fungi. In previous work examining pressure treatment of wood, ethanol was used as the diluent/carrier for CWO. However, it is preferable to use a water-based carrier for environmental, safety and cost...

Liquid chromatographic extraction medium

DOEpatents

Horwitz, E. Philip; Dietz, Mark L.

1994-01-01

A method and apparatus for extracting strontium and technetium values from biological, industrial and environmental sample solutions using a chromatographic column is described. An extractant medium for the column is prepared by generating a solution of a diluent containing a Crown ether and dispersing the solution on a resin substrate material. The sample solution is highly acidic and is introduced directed to the chromatographic column and strontium or technetium is eluted using deionized water.

Diamond Deposition and Defect Chemistry Studied via Solid State NMR

DTIC Science & Technology

1994-06-30

system can be found elsewhere (121. The flame characteristics depend on a number of parameters . The flame conditions depend on (a) equivalence ratio...b) pressure, (c) cold gas velocity, and (d) diluent. The effect of the various parameters are described briefly. This quantity describes the carbon...important parameter that must be controlled carefully. Many chemical processes in flames, including those in which collision activation or stabilization

BMDO Technology and the Electric Utility Industry

DTIC Science & Technology

1997-01-01

use flue gas desulfurization systems, called scrubbers, to control the emissions of S02. In general, such systems allow combustion gases to pass...M) of flue gas desulfurization systems were about .0114 cents per kilowatt-hour. This small fraction of a penny translates to hundreds of millions...diluent gas , and opacity of units (the percentage of light that one can see through the flue gas ). According to requirements, CEM equipment must be

Supplemental effect of different levels of taurine in Modena on boar semen quality during liquid preservation at 17°C.

PubMed

Li, Hao; Zhang, Xiao-Gang; Fang, Qian; Liu, Qi; Du, Ren-Rang; Yang, Gong-She; Wang, Li-Qiang; Hu, Jian-Hong

2017-11-01

Peroxidation damage induces sublethal injury to boar sperm during the storage process. Taurine has already been demonstrated to protect cells effectively from oxidant-induced injury. This study was aimed to evaluate the effect of different concentrations of taurine (0.5, 1, 5 and 10 mmol/L) in Modena diluent on boar sperm quality during liquid storage at 17°C. Ejaculates from sexually mature Duroc pigs were collected, pooled and preserved in the Modena containing different concentrations of taurine. Sperm motility, plasma membrane integrity, acrosome integrity, total antioxidative capacity (T-AOC) activity and malondialdehyde content (MDA) were examined every 24 h. Modena diluent containing taurine suppressed the reduction in sperm qualities during the process of liquid preservation compared with those of the control group. After 5 days of liquid preservation, the addition of taurine at 5 mmol/L had the optimal effect on survival time as well as maintenance of motility, plasma membrane integrity, acrosomal integrity, T-AOC activity and MDA content. These results may suggest the possibility that the proper addition of taurine to the semen extender improves the swine production system using artificial insemination by the suppressing of sperm damage and subsequent dysfunction during liquid preservation. © 2017 Japanese Society of Animal Science.

Enhanced dissolution of sildenafil citrate as dry foam tablets.

PubMed

Sawatdee, Somchai; Atipairin, Apichart; Sae Yoon, Attawadee; Srichana, Teerapol; Changsan, Narumon

2017-01-30

Dry foam formulation technology is alternative approach to enhance dissolution of the drug. Sildenafil citrate was suspended in sodium dodecyl sulfate solution and adding a mixture of maltodextrin and mannitol as diluent to form a paste. Sildenafil citrate paste was passed through a nozzle spray bottle to obtain smooth foam. The homogeneous foam was dried in a vacuum oven and sieved to obtain dry foam granules. The granules were mixed with croscarmellose sodium, magnesium stearate and compressed into tablet. All formulations were evaluated for their physicochemical properties and dissolution profiles. All the tested excipients were compatible with sildenafil citrate by both differential scanning calorimetry (DSC) and infrared (IR) analysis. There are no X-ray diffraction (XRD) peaks representing crystals of sildenafil citrate observed form dry foam formulations. The hardness of tablets was about 5 kg, friability test <1% with a disintegration time <5 min. The sildenafil citrate dry foam tablet had higher dissolution rate in 0.1 N HCl in comparison with commercial sildenafil citrate tablet, sildenafil citrate prepared by direct compression and wet granulation method. Sildenafil citrate dry foam tablet with the high-level composition of surfactant, water and diluent showed enhanced dissolution rate than that of the lower-level composition of these excipients. This formulation was stable under accelerated conditions for at least 6 months.

Method for the recovery of actinide elements from nuclear reactor waste

DOEpatents

Horwitz, E. Philip; Delphin, Walter H.; Mason, George W.

1979-01-01

A process for partitioning and recovering actinide values from acidic waste solutions resulting from reprocessing of irradiated nuclear fuels by adding hydroxylammonium nitrate and hydrazine to the waste solution to adjust the valence of the neptunium and plutonium values in the solution to the +4 oxidation state, thus forming a feed solution and contacting the feed solution with an extractant of dihexoxyethyl phosphoric acid in an organic diluent whereby the actinide values, most of the rare earth values and some fission product values are taken up by the extractant. Separation is achieved by contacting the loaded extractant with two aqueous strip solutions, a nitric acid solution to selectively strip the americium, curium and rare earth values and an oxalate solution of tetramethylammonium hydrogen oxalate and oxalic acid or trimethylammonium hydrogen oxalate to selectively strip the neptunium, plutonium and fission product values. Uranium values remain in the extractant and may be recovered with a phosphoric acid strip. The neptunium and plutonium values are recovered from the oxalate by adding sufficient nitric acid to destroy the complexing ability of the oxalate, forming a second feed, and contacting the second feed with a second extractant of tricaprylmethylammonium nitrate in an inert diluent whereby the neptunium and plutonium values are selectively extracted. The values are recovered from the extractant with formic acid.

Effects of large volume injection of aliphatic alcohols as sample diluents on the retention of low hydrophobic solutes in reversed-phase liquid chromatography.

PubMed

David, Victor; Galaon, Toma; Aboul-Enein, Hassan Y

2014-01-03

Recent studies showed that injection of large volume of hydrophobic solvents used as sample diluents could be applied in reversed-phase liquid chromatography (RP-LC). This study reports a systematic research focused on the influence of a series of aliphatic alcohols (from methanol to 1-octanol) on the retention process in RP-LC, when large volumes of sample are injected on the column. Several model analytes with low hydrophobic character were studied by RP-LC process, for mobile phases containing methanol or acetonitrile as organic modifiers in different proportions with aqueous component. It was found that starting with 1-butanol, the aliphatic alcohols can be used as sample solvents and they can be injected in high volumes, but they may influence the retention factor and peak shape of the dissolved solutes. The dependence of the retention factor of the studied analytes on the injection volume of these alcohols is linear, with a decrease of its value as the sample volume is increased. The retention process in case of injecting up to 200μL of upper alcohols is dependent also on the content of the organic modifier (methanol or acetonitrile) in mobile phase. Copyright © 2013 Elsevier B.V. All rights reserved.

Auto-ignitions of a methane/air mixture at high and intermediate temperatures

NASA Astrophysics Data System (ADS)

Leschevich, V. V.; Martynenko, V. V.; Penyazkov, O. G.; Sevrouk, K. L.; Shabunya, S. I.

2016-09-01

A rapid compression machine (RCM) and a shock tube (ST) have been employed to study ignition delay times of homogeneous methane/air mixtures at intermediate-to-high temperatures. Both facilities allow measurements to be made at temperatures of 900-2000 K, at pressures of 0.38-2.23 MPa, and at equivalence ratios of 0.5, 1.0, and 2.0. In ST experiments, nitrogen served as a diluent gas, whereas in RCM runs the diluent gas composition ranged from pure nitrogen to pure argon. Recording pressure, UV, and visible emissions identified the evolution of chemical reactions. Correlations of ignition delay time were generated from the data for each facility. At temperatures below 1300 K, a significant reduction of average activation energy from 53 to 15.3 kcal/mol was obtained. Moreover, the RCM data showed significant scatter that dramatically increased with decreasing temperature. An explanation for the abnormal scatter in the data was proposed based on the high-speed visualization of auto-ignition phenomena and experiments performed with oxygen-free and fuel-free mixtures. It is proposed that the main reason for such a significant reduction of average activation energy is attributable to the premature ignition of ultrafine particles in the reactive mixture.

Numerical and Experimental Investigation of Confined Turbulent Multiple Transverse Jets (Briefing Charts)

DTIC Science & Technology

2014-07-29

14.3. The momentum and scalar mixing is investigated through the solution of the Reynolds-Averaged Navier Stokes (RANS) equations. The mean scalar...demonstrated symmetry , only a one-half section of the geometry is considered. All numerical simulations capture salient flow structures such as the counter...distribution unlimited Symmetry Plane Walls Diluents’ Inlet Vy = 100 m/s Previous Numerical Work at AFRL: Air-to-Air Experimental Configuration

Separation of uranium from technetium in recovery of spent nuclear fuel

DOEpatents

Pruett, D.J.; McTaggart, D.R.

1983-08-31

Uranium and technetium in the product stream of the Purex process for recovery of uranium in spent nuclear fuel are separated by (1) contacting the aqueous Purex product stream with hydrazine to reduce Tc/sup +7/ therein to a reduced species, and (2) contacting said aqueous stream with an organic phase containing tributyl phosphate and an organic diluent to extract uranium from said aqueous stream into said organic phase.

Crude oil desulfurization

NASA Technical Reports Server (NTRS)

Kalvinskas, J. J.; Hsu, G. C.; Ernest, J. B. (Inventor)

1982-01-01

High sulfur crude oil is desulfurized by a low temperature (25-80 C.) chlorinolysis at ambient pressure in the absence of organic solvent or diluent but in the presence of water (water/oil=0.3) followed by a water and caustic wash to remove sulfur and chlorine containing reaction products. The process described can be practiced at a well site for the recovery of desulfurized oil used to generate steam for injection into the well for enhanced oil recovery.

Process for the recovery of strontium from acid solutions

DOEpatents

Horwitz, E.P.; Dietz, M.L.

1992-03-31

The invention is a process for selectively extracting strontium and technetium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant is a macrocyclic polyether in a diluent which is insoluble in water, but which will itself dissolve a small amount of water. The process will extract strontium and technetium values from nitric acid solutions which are up to 6 molar in nitric acid. 5 figs.

Separation of uranium from technetium in recovery of spent nuclear fuel

DOEpatents

Pruett, David J.; McTaggart, Donald R.

1984-01-01

Uranium and technetium in the product stream of the Purex process for recovery of uranium in spent nuclear fuel are separated by (1) contacting the aqueous Purex product stream with hydrazine to reduce Tc.sup.+7 therein to a reduced species, and (2) contacting said aqueous stream with an organic phase containing tributyl phosphate and an organic diluent to extract uranium from said aqueous stream into said organic phase.

Measurement of Rubidium Number Density Under Optically Thick Conditions

DTIC Science & Technology

2010-11-15

for efficient, high-power laser systems . While these alkali metals offer great promise, there are several issues which need to be resolved. Two such...circulator. The pressure and composition of the diluent within the heat pipe could also be adjusted using the attached gas handling system . The gas...handling system consisted of a vacuum pump, 10 Torr and 1000 Torr baratrons, various valves and a line going to a regulated gas cylinder. The second

New Reactive Diluents for an Environmentally Efficient Approach to Composite Repair

DTIC Science & Technology

2010-02-16

7.25 ppm, δ 77.0 ppm; MeOH-δ4, d 3.31 ppm, δ 49.15 ppm. The n-BuLi (2.5 M in hexanes), 4,4’-dibromophenyl ether, vinyl tributyltin , THF (anhydrous...4’-tributylsilyldiphenyl ether (34.48 g, 79 mmol), CsF, (25.28 g, 166 mmol), vinyl tributyltin (27.65 g, 87 mmol), Pd2(dba)3 (3.63 g, 4.0 mmol), and

Liquid chromatographic extraction medium

DOEpatents

Horwitz, E.P.; Dietz, M.L.

1994-09-13

A method and apparatus are disclosed for extracting strontium and technetium values from biological, industrial and environmental sample solutions using a chromatographic column. An extractant medium for the column is prepared by generating a solution of a diluent containing a Crown ether and dispersing the solution on a resin substrate material. The sample solution is highly acidic and is introduced directed to the chromatographic column and strontium or technetium is eluted using deionized water. 1 fig.

Method for recovering palladium and technetium values from nuclear fuel reprocessing waste solutions

DOEpatents

Horwitz, E. Philip; Delphin, Walter H.

1979-07-24

A method for recovering palladium and technetium values from nuclear fuel reprocessing waste solutions containing these and other values by contacting the waste solution with an extractant of tricaprylmethylammonium nitrate in an inert hydrocarbon diluent which extracts the palladium and technetium values from the waste solution. The palladium and technetium values are recovered from the extractant and from any other coextracted values with a strong nitric acid strip solution.

PROCESS FOR SEGREGATING URANIUM FROM PLUTONIUM AND FISSION-PRODUCT CONTAMINATION

DOEpatents

Ellison, C.V.; Runion, T.C.

1961-06-27

An aqueous nitric acid solution containing uranium, plutonium, and fission product values is contacted with an organic extractant comprised of a trialkyl phosphate and an organic diluent. The relative amounts of trialkyl phosphate and uranium values are controlled to achieve a concentration of uranium values in the organic extractant of at least 0.35 moles uranium per mole of trialkyl phosphate, thereby preferentially extracting uranium values into the organic extractant.

Individual and combined effects of in-ovo injection of creatine monohydrate and glucose on somatic characteristics, energy status, and posthatch performance of broiler embryos and hatchlings.

PubMed

Zhang, L; Zhu, X D; Wang, X F; Li, J L; Gao, F; Zhou, G H

2016-10-01

Two trials were conducted to investigate the individual and combined effects of in-ovo injection of creatine monohydrate ( CMH: ) and glucose on the somatic characteristics and energy status of broiler embryos and hatchlings and the growth performance of chicks during the first wk posthatch. In trial 1, 550 17.5-day-old living, fertile eggs were randomly assigned to 1 of 5 treatment groups, including 1) a noninjected control, 2) a 0.4 mL diluent-injected control, or 0.4 mL diluents containing 3) 6 mg CMH, 4) 25 mg glucose, or 5) a combination of 6 mg CMH and 25 mg glucose (identified as CMH+G: ). In trial 2, after hatch, 48 hatchlings with individual body weight ( BW: ) close to the average BW of their incubation group were randomly selected and placed in 6 replicates of 8 birds each to evaluate their growth performance during the first wk posthatch. Compared with the noninjected and the 0.4-mL diluent-injected control groups, individual injection of CMH or glucose did not affect the hatching time, hatchability, somatic characteristics, or concentrations of glycogen and glucose in the liver and pectoralis major ( PM: ) muscle, although injection of CMH increased (P < 0.05) concentrations of creatine ( CR: ) and phosphocreatine ( PCR: ) in the PM muscle on d 19 of incubation (E19.5). However, the CMH+G treatment increased (P < 0.05) BW relative to set egg weight ( SEW: ) on E19.5, as well as residual yolk sac weight on the day of hatch. Moreover, the CMH+G treatment also increased (P < 0.05) concentrations of glycogen and glucose in the liver and concentrations of Cr and PCr in the PM muscle on E19.5. Chicks in the CMH+G group also exhibited higher BW gain during the first wk than controls (P < 0.05). These results indicate that combined injection of CMH and glucose during the last stage of incubation have a synergistic effect on improvement of the energy status of embryos and hatchlings, which is useful for enhancing embryo development, and subsequently improving chick growth during the early posthatch stages. © 2016 Poultry Science Association Inc.

Principles, performance, and applications of spectral reconstitution (SR) in quantitative analysis of oils by Fourier transform infrared spectroscopy (FT-IR).

PubMed

García-González, Diego L; Sedman, Jacqueline; van de Voort, Frederik R

2013-04-01

Spectral reconstitution (SR) is a dilution technique developed to facilitate the rapid, automated, and quantitative analysis of viscous oil samples by Fourier transform infrared spectroscopy (FT-IR). This technique involves determining the dilution factor through measurement of an absorption band of a suitable spectral marker added to the diluent, and then spectrally removing the diluent from the sample and multiplying the resulting spectrum to compensate for the effect of dilution on the band intensities. The facsimile spectrum of the neat oil thus obtained can then be qualitatively or quantitatively analyzed for the parameter(s) of interest. The quantitative performance of the SR technique was examined with two transition-metal carbonyl complexes as spectral markers, chromium hexacarbonyl and methylcyclopentadienyl manganese tricarbonyl. The estimation of the volume fraction (VF) of the diluent in a model system, consisting of canola oil diluted to various extents with odorless mineral spirits, served as the basis for assessment of these markers. The relationship between the VF estimates and the true volume fraction (VF(t)) was found to be strongly dependent on the dilution ratio and also depended, to a lesser extent, on the spectral resolution. These dependences are attributable to the effect of changes in matrix polarity on the bandwidth of the ν(CO) marker bands. Excellent VF(t) estimates were obtained by making a polarity correction devised with a variance-spectrum-delineated correction equation. In the absence of such a correction, SR was shown to introduce only a minor and constant bias, provided that polarity differences among all the diluted samples analyzed were minimal. This bias can be built into the calibration of a quantitative FT-IR analytical method by subjecting appropriate calibration standards to the same SR procedure as the samples to be analyzed. The primary purpose of the SR technique is to simplify preparation of diluted samples such that only approximate proportions need to be adhered to, rather than using exact weights or volumes, the marker accounting for minor variations. Additional applications discussed include the use of the SR technique in extraction-based, quantitative, automated FT-IR methods for the determination of moisture, acid number, and base number in lubricating oils, as well as of moisture content in edible oils.

Correlation Between Iron and alpha and pi Glutathione-S-Transferase Levels in Humans

DTIC Science & Technology

2012-09-01

assays were performed as described in the Biotrin High Sensitivity Alpha GST EIA kit protocol. First, serum samples were diluted 1:10 with wash solution...immunosorbent assays were performed as described in the Biotrin Pi GST EIA kit protocol. First, plasma samples were diluted 1:5 with sample diluent...immunosorbent assays were performed as described in the AssayMax Human Transferrin ELISA kit protocol. First, serum samples were diluted 1:2000 with MIX

PROCESS FOR THE RECOVERY OF URANIUM FROM PHOSPHATIC ORE

DOEpatents

Long, R.L.

1959-04-14

A proccss is described for the recovery of uranium from phosphatic products derived from phosphatic ores. It has been discovered that certain alkyl phosphatic, derivatives can be employed in a direct solvent extraction operation to recover uranium from solid products, such as superphosphates, without first dissolving such solids. The organic extractants found suitable include alkyl derivatives of phosphoric, pyrophosphoric, phosof the derivative contains from 4 to 7 carbon atoms. A diluent such as kerosene is also used.

Field Evaluation of a Passive Sampling Device for Hydrazines in Ambient Air

DTIC Science & Technology

1990-04-06

MANIDIFUIOFOBELFO Figure 2. Test gas generator schematic. Conditioned house- compressed air is used as the diluent. The conditioning procedure consists...of passing the house air through a series of demisters, a hot Hopcalite catalyst bed, a reciprocating dual-tower molecular sieve scrubber, and finally... Air P. A. TAFFE,* S. W. BROWN,** A. R. THUROW,*** J. C. TRAvIs**** *GEO-Centers Inc., **EG&G, BOC-022, KSC, FL . . F. ***Wiltech Corp., KSC, FL MAY 0

Intraosseous Versus Intravenous Infusion of Hydroxocobalamin for the Treatment Of Acute Severe Cyanide Toxicity in a Swine Model

DTIC Science & Technology

2014-11-01

ORIGINAL CONTRIBUTION Intraosseous Versus Intravenous Infusion of Hydroxocobalamin for the Treatment Of Acute Severe Cyanide Toxicity in a Swine...because the volume of diluent needed is too large. Thus, intraosseous (IO) infusion may be an alternative, as it is simple and has been recommended...1. REPORT DATE 01 NOV 2014 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE Intraosseous Versus Intravenous Infusion of

Topical Hazard Evaluation Program of Candidate Insect Repellents AI3-38352a, AI3-38354a, AI3-38355a, US Department of Agriculture Proprietary Chemicals, May 1982 - November 1983.

DTIC Science & Technology

1983-11-01

irrita- chemical and of 10% (wv) A13-38357a, AI3-38360a, tion reaction under Oil of Bergamot (positive and Ar3-38361a did test conditions and control...caused a greater Irritant positive control (Oil of effect than In un- Bergamot ) and diluent were Irradiated skin areas. applied to additional skin

Turbulent Flame Stabilization Methods Using Confinement, Diluents, and High-Potential Electric Fields

DTIC Science & Technology

2014-08-03

the corona discharge was optimal for flame stabilization when it was located where fuel/air mixtures were within flammability limits locally...field [56]. This ionic wind is also known as the “ corona wind” [57] due to the corona discharge that develops at the sharp edge of the charged... Corona Discharge ,” Transactions of the American Institute of Electrical Engineers, Part I: Communication and Electronics, vol. 80, no. 2, pp. 143-150

Method for liquid chromatographic extraction of strontium from acid solutions

DOEpatents

Horwitz, E. Philip; Dietz, Mark L.

1992-01-01

A method and apparatus for extracting strontium and technetium values from biological, industrial and environmental sample solutions using a chromatographic column is described. An extractant medium for the column is prepared by generating a solution of a diluent containing a Crown ether and dispersing the solution on a resin substrate material. The sample solution is highly acidic and is introduced directed to the chromatographic column and strontium or technetium is eluted using deionized water.

NON-CORROSIVE PLUTONIUM FUEL SYSTEMS

DOEpatents

Coffinberry, A.S.; Waber, J.T.

1962-10-23

An improved plutonium reactor liquid fuel is described for utilization in a nuclear reactor having a tantalum fuel containment vessel. The fuel consists of plutonium and a diluent such as iron, cobalt, nickel, cerium, cerium-- iron, cerium--cobalt, cerium--nickel, and cerium--copper, and an additive of carbon and silicon. The carbon and silicon react with the tantalum container surface to form a coating that is self-healing and prevents the corrosive action of liquid plutonium on the said tantalum container. (AEC)

Temperature Dependence of the O + HO2 Rate Coefficient

NASA Technical Reports Server (NTRS)

Nicovich, J. M.; Wine, P. H.

1997-01-01

A pulsed laser photolysis technique has been employed to investigate the kinetics of the radical-radical reaction O((sup 3)P) + HO2 OH + O2 over the temperature range 266-391 K in 80 Torr of N2 diluent gas. O((sup 3)P) was produced by 248.5-nm KrF laser photolysis of O3 followed by rapid quenching of O(1D) to O((sup 3)P) while HO2 was produced by simultaneous photolysis of H2O2 to create OH radicals which, in turn, reacted with H2O2 to yield HO2. The O((sup 3)P) temporal profile was monitored by using time-resolved resonance fluorescence spectroscopy. The HO2 concentration was calculated based on experimentally measured parameters. The following Arrhenius expression describes our experimental results: k(sub 1)(T) equals (2.91 +/- 0.70) x 10(exp -11) exp[(228 +/- 75)/T] where the errors are 2 sigma and represent precision only. The absolute uncertainty in k, at any temperature within the range 266-391 K is estimated to be +/- 22 percent. Our results are in excellent agreement with a discharge flow study of the temperature dependence of k(sub 1) in 1 Torr of He diluent reported by Keyser, and significantly reduce the uncertainty in the rate of this important stratospheric reaction at subambient temperatures.

Key Technical Aspects Influencing the Accuracy of Tablet Subdivision.

PubMed

Teixeira, Maíra T; Sá-Barreto, Lívia C L; Gratieri, Taís; Gelfuso, Guilherme M; Silva, Izabel C R; Cunha-Filho, Marcílio S S

2017-05-01

Tablet subdivision is a common practice used mainly for dose adjustment. The aim of this study was to investigate how the technical aspects of production as well as the method of tablets subdivision (employing a tablet splitter or a kitchen knife) influence the accuracy of this practice. Five drugs commonly used as subdivided tablets were selected. For each drug, the innovator drug product, a scored-generic and a non-scored generic were investigated totalizing fifteen drug products. Mechanical and physical tests, including image analysis, were performed. Additionally, comparisons were made between tablet subdivision method, score, shape, diluent composition and coating. Image analysis based on surface area was a useful tool as an alternative assay to evaluate the accuracy of tablet subdivision. The tablet splitter demonstrates an advantage relative to a knife as it showed better results in weight loss and friability tests. Oblong, coated and scored tablets had better results after subdivision than round, uncoated and non-scored tablets. The presence of elastic diluents such as starch and dibasic phosphate dehydrate conferred a more appropriate behaviour for the subdivision process than plastic materials such as microcrystalline cellulose and lactose. Finally, differences were observed between generics and their innovator products in all selected drugs with regard the quality control assays in divided tablet, which highlights the necessity of health regulations to consider subdivision performance at least in marketing authorization of generic products.

The CETAC ADX-500 Autodiluter System: A Study of Dilution Performance with the ELAN 6000 ICP-MS and ELAN Software

USGS Publications Warehouse

May, T.W.; Wiedmeyer, Ray H.

1998-01-01

The CETAC ADX-500 autodiluter system was tested with ELAN?? v 2.1 software and the ELAN 6000 ICP-MS instrument to determine on-line automated dilution performance during analysis of standard solutions containing nine analytes representative of the mass spectral range (mass 9 to mass 238). Two or more dilution schemes were tested for each of 5 test tube designs. Dilution performance was determined by comparison of analyte concentration means of diluted and non-diluted standards. Accurate dilutions resulted with one syringe pump addition of diluent in small diameter round-bottomed (13 mm OD) or conical-tipped (18 mm OD) tubes and one or more syringe pump additions in large diameter (28 mm OD) conical-tipped tubes. Inadequate dilution mixing which produced high analyte concentration means was observed for all dilutions conducted in flat-bottomed tubes, and for dilutions requiring multiple syringe additions of diluent in small diameter round-bottomed and conical tipped tubes. Effective mixing of diluted solutions was found to depend largely upon tube diameter and liquid depth: smaller tube diameters and greater liquid depth resulted in ineffective mixing, whereas greater tube diameter and shallower liquid depth facilitated effective mixing. Two design changes for the autodiluter were suggested that would allow effective mixing to occur using any dilution scheme and tube design.

Investigation of Possible Maillard Reaction Between Acyclovir and Dextrose upon Dilution Prior to Parenteral Administration.

PubMed

Siahi Shadbad, Mohammad Reza; Ghaderi, Faranak; Hatami, Leila; Monajjemzadeh, Farnaz

2016-12-01

In this study the stability of parenteral acyclovir (ACV) when diluted in dextrose (DEX) as large volume intravenous fluid preparation (LVIF) was evaluated and the possible Maillard reaction adducts were monitored in the recommended infusion time. Different physicochemical methods were used to evaluate the Maillard reaction of dextrose with ACV to track the reaction in real infusion condition. Other large volume intravenous fluids were checked regarding the diluted drug stability profile. Differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and mass data proved the reaction of glucose with dextrose. A Maillard-specific high performance liquid chromatography (HPLC) method was used to track the reaction in real infusion condition in vitro. The nucleophilic reaction occurred in diluted parenteral preparations of acyclovir in 5% dextrose solutions. The best diluent solution was also selected as sodium chloride and introduced based on drug stability and also its adsorption onto different infusion sets (PVC or non PVC) to provide an acceptable administration protocol in clinical practices. Although, the Maillard reaction was proved and successfully tracked in diluted solutions, and the level of drug loss when diluted in dextrose was reported to be between 0.27 up to 1.03% of the initial content. There was no drug adsorption to common infusion sets. The best diluent for parenteral acyclovir is sodium chloride large volume intravenous fluid.

Impact of Aircraft Emissions on Air Quality in the Vicinity of Airports. Volume 4. Nitrogen Dioxide and Hydrocarbons.

DTIC Science & Technology

1984-04-01

PROCESSING 2.1.1 Siting, Instrumentation, and Measurement History The ANLIEES Air Resources Section Air Monitoring Laboratory (AM4L) was located at... supplied from an external cylinder in a blend containing 10% C2H4 reactant and 90% CO2 diluent. The instrument was operated in a fast-response mode...an alternative procedure was adopted for their determination and was utilized to determine time lags for several different periods of time scattered

Laboratory Development of a Passive Sampling Device for Hydrazines in Ambient Air

DTIC Science & Technology

1990-05-30

of dilution air . Conditioned house- compressed air is used as the diluent. The conditioning procedure consists of passing the house air through a...Device N4 for Hydrazines in Ambient Air P. A. TAFFE,* K. P. CROSSMAN,* S. L. ROSE-PEHRSSON, AND J. R. WYATT 0 Chemistry Dynamics and Diagnostic Branch...Ambient Air 6. AUTHOR(S) Taffe,* P. A., Crossman,* K. P., Wyatt, J. R., and Rose-Pehrsson, S. L. 7. PERFORMING ORGANIZATION NAME(S) AND ADORESS(ES) 8

Physical Properties of Polymers (Ultrastructure Processing of Polymers)

DTIC Science & Technology

1982-09-30

vinyl benzene Network-Diluent Systems". 17. J . Appl. Polym. Sci. 28, 219-224 (1983) (with R. Vukovic and W.J. MacKnight) "Compatibility of Some...Temperature of Polymer Networks by Dil uents". 23. J . Appl. Polym. Sci. 28, 1379-1389 (1983) (with R. Vukovic , V. Kuresevic, N. Segudovic, and W.J...AFOSR 80-0101 IV. DATES: 1 January 1980 - 30 September 1982 V. SENIOR RESEARCH PERSONNEL*: Dr. C. Crosby Dr. G. ten Brinke Dr. T. Ellis Dr. R. Vukovic

Multi-year residual activity of Arborjet's IMA-jet (imidacloprid 5% SL) against emerald ash borer [Agrilus planipennis Fairemaire (Coleoptera: Buprestidae)] in green ash (Fraxinus pennsylvanica Marsh) in Troy, MI.

Treesearch

Joseph J. Doccola; Peter M. Wild; Eric J. Bristol; Joseph Lojko; Xin Li

2007-01-01

In cooperative university studies, IMA-jet treated green ash were effectively protected for 2 years to date in Troy, MI against emerald ash borer (EAB). Trees were infested at the time of treatment, exhibiting epicormic sprouting and thinning canopies. Twenty trees were injected with IMA-jet alone or with a diluent to aid uptake and translocation within the vascular...

Development of a universal solvent for the decontamination of acidic liquid radioactive wastes

NASA Astrophysics Data System (ADS)

Todd, T. A.; Brewer, K. N.; Law, J. D.; Wood, D. J.; Herbest, R. S.; Romanovskiy, V. N.; Esimantovskiy, V. M.; Smirnov, I. V.; Babain, V. A.

1999-01-01

A teritiary solvent containing chlorinated cobalt dicarbollide, polyethylene glycol and diphenylcarbamoylmethylphosphine oxide was evaluated in different non-nitroaromatic diluents for the separation of cesium, strontium, actinides and rare earth elements from acidic liquid radioactive waste. Decontamination factors of >95% for Cs, 99.7% for Sr, and 99.99% for actinides were achieved in four successive batch contacts using actual radioactive waste. Pilot plant testing in centrifugal contactors using simulated wastes, has demonstrated removal of >99% of all targeted ions.

Durable zinc oxide-containing sorbents for coal gas desulfurization

DOEpatents

Siriwardane, Ranjani V.

1996-01-01

Durable zinc-oxide containing sorbent pellets for removing hydrogen sulfide from a gas stream at an elevated temperature are made up to contain titania as a diluent, high-surface-area silica gel, and a binder. These materials are mixed, moistened, and formed into pellets, which are then dried and calcined. The resulting pellets undergo repeated cycles of sulfidation and regeneration without loss of reactivity and without mechanical degradation. Regeneration of the pellets is carried out by contacting the bed with an oxidizing gas mixture.

In vitro sperm characterization and development of a sperm cryopreservation method using directional solidification in the killer whale (Orcinus orca).

PubMed

Robeck, T R; Gearhart, S A; Steinman, K J; Katsumata, E; Loureiro, J D; O'Brien, J K

2011-07-15

Research was conducted to characterize seminal traits and to develop a sperm cryopreservation method using directional freezing (DF) for the killer whale (Orcinus orca). Experiments evaluated effects of: (i) freezing rate (SLOW, MED, FAST) by diluent (BF5F, Biladyl®, EYC) in 0.5 mL straws; and (ii) freezing method (straw or DF) by glycerol (3, 6, or 9% final concentration, v:v) on in vitro sperm quality. Fresh ejaculates (n = 161) were (mean ± SD) 7.8 ± 7.4 mL at 740 × 10(6) sperm/mL with 92.2 ± 6.3% total motility (TM), 85.4 ± 6.9% progressive motility (PM), 89.6 ± 9.0% viability and 89.8 ± 9.2% acrosome integrity. Samples frozen using straws by the MED or SLOW method were improved (P < 0.05) over FAST across all diluents. At 3 h post thaw (PT), TM, PM, Rapid motility (RM), VAP, VCL, ALH and viability for 3% and 6% glycerol were improved (P < 0.05) over 9% glycerol. Directional freezing samples at 0 h and 3 h PT, at all glycerol concentrations, displayed higher (P < 0.001) TM, PM, RM, VAP, VSL, VCL and viability /intact acrosomes (PI/FITC-PNA) than straw. These data provided the first information on ejaculate characteristics and the development of a semen cryopreservation method using DF in the killer whale. Copyright © 2011 Elsevier Inc. All rights reserved.

Plaquing procedure for infectious hematopoietic necrosis virus

USGS Publications Warehouse

Burke, J.A.; Mulcahy, D.

1980-01-01

A single overlay plaque assay was designed and evaluated for infectious hematopoietic necrosis virus. Epithelioma papillosum carpio cells were grown in normal atmosphere with tris(hydroxymethyl)aminomethane- or HEPES (N-2-hydroxyethylpiperazine-N'-2-ethanesulfonic acid)-buffered media. Plaques were larger and formed more quickly on 1- to 3-day-old cell monolayers than on older monolayers. Cell culture medium with a 10% addition of fetal calf serum (MEM 10) or without serum (MEM 0) were the most efficient virus diluents. Dilution with phosphate-buffered saline, saline, normal broth, or deionized water reduced plaque numbers. Variations in the pH (7.0 to 8.0) of a MEM 0 diluent did not affect plaque numbers. Increasing the volume of viral inoculum above 0.15 ml (15- by 60-mm plate) decreased plaquing efficiency. Significantly more plaques occurred under gum tragacanth and methylcellulose than under agar or agarose overlays. Varying the pH (6.8 to 7.4) of methylcellulose overlays did not significantly change plaque numbers. More plaques formed under the thicker overlays of both methylcellulose and gum tragacanth. Tris(hydroxymethyl)aminomethane and HEPES performed equally well, buffering either medium or overlay. Plaque numbers were reduced when cells were rinsed after virus adsorption or less than 1 h was allowed for adsorption. Variation in adsorption time between 60 and 180 min did not change plaque numbers. The mean plaque formation time was 7 days at 16 degrees C. The viral dose response was linear when the standardized assay was used.

Estimation of lower flammability limits of C-H compounds in air at atmospheric pressure, evaluation of temperature dependence and diluent effect.

PubMed

Mendiburu, Andrés Z; de Carvalho, João A; Coronado, Christian R

2015-03-21

Estimation of the lower flammability limits of C-H compounds at 25 °C and 1 atm; at moderate temperatures and in presence of diluent was the objective of this study. A set of 120 C-H compounds was divided into a correlation set and a prediction set of 60 compounds each. The absolute average relative error for the total set was 7.89%; for the correlation set, it was 6.09%; and for the prediction set it was 9.68%. However, it was shown that by considering different sources of experimental data the values were reduced to 6.5% for the prediction set and to 6.29% for the total set. The method showed consistency with Le Chatelier's law for binary mixtures of C-H compounds. When tested for a temperature range from 5 °C to 100 °C, the absolute average relative errors were 2.41% for methane; 4.78% for propane; 0.29% for iso-butane and 3.86% for propylene. When nitrogen was added, the absolute average relative errors were 2.48% for methane; 5.13% for propane; 0.11% for iso-butane and 0.15% for propylene. When carbon dioxide was added, the absolute relative errors were 1.80% for methane; 5.38% for propane; 0.86% for iso-butane and 1.06% for propylene. Copyright © 2014 Elsevier B.V. All rights reserved.

Evaluation of degree of blending colored diluents using color difference signal method.

PubMed

Miyazaki, Yasunori; Uchino, Tomonobu; Kagawa, Yoshiyuki

2014-01-01

We developed a color difference signal method to evaluate the degree of blending powdered medicines in pharmacies. In the method, the degree of blending is expressed as the relative standard deviation of the color difference signal value (Cb or Cr) of the YCbCr color space after digital photos of the blended medicines are analyzed by image processing. While the method is effective to determine the degree of blending colored medicines, it remains unknown whether it can be applied to uncolored or white-colored medicines. To investigate this, we examined colored diluents to identify an indicator of the degree mixtures are blended. In this study, we applied this method to Pontal® and Prednisolone® powders, which were used as uncolored and white-colored medicines, respectively. Each of these medicines was blended with the colored lactose using a pestle and mortar, and then the uniformity of blending was evaluated. The degree of blending was well-monitored in both mixtures with various blending ratios (1 : 9-9 : 1), showing a sufficient uniformity at 60 rotations of the pestle. Moreover, the Cr values of the mixtures with various blending ratios were correlated with the concentration of active pharmaceutical ingredients in these medicines, which was determined using HPLC. This indicated the usefulness of the color difference signal method for the quantitative determination of medicines. Thus, we demonstrated the applicability and effectiveness of this method to check dispensing powders.

Radical Cations and Acid Protection during Radiolysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mincher, Bruce J.; Zarzana, Christopher A.; Mezyk, Stephen P.

2016-09-09

Ligand molecules for used nuclear fuel separation schemes are exposed to high radiation fields and high concentrations of acid. Thus, an understanding of the complex interactions between extraction ligands, diluent, and acid is critical to understanding the performance of a separation process. The diglycolamides are ligands with important structural similarities to CMPO; however, previous work has shown that their radiolytic degradation has important mechanistic differences from CMPO. The DGAs do not enjoy radioprotection by HNO3 and the kinetics of DGA radiolytic degradation are different. CMPO degrades with pseudo-zero-order kinetics in linear fashion with absorbed dose while the DGAs degrade inmore » pseudo-first-order, exponential fashion. This suggests that the DGAs degrade by simple reaction with some product of direct diluent radiolysis, while CMPO degradation is probably multi-step, with a slow step that is not dependent on the CMPO concentration, and mitigated by HNO 3. It is thus believed that radio-protection and the zero-order radiolytic degradation kinetics are related, and that these phenomena are a function of either the formation of strong acid complexes with CMPO and/or to the presence of the CMPO phenyl ring. Experiments to test both these hypotheses have been designed and partially conducted. This report summarizes findings related to these phenomena for FY16, in satisfaction of milestone M3FT-16IN030104053. It also reports continued kinetic measurements for the reactions of the dodecane radical cation with solvent extraction ligands.« less

Stability of dilute solutions of tuberculin purified protein derivative.

PubMed

Landi, S; Held, H R

1978-06-01

The biological potency of 15 commercially available tuberculin solutions prepared from a master batch of tuberculin purified protein derivative (PPD) (PPD-CT68) and using a newly formulated diluent (Connaught diluent) containing 0.0005% Tween 80 as an anti-adsorption agent and 0.3% phenol as a preservative, was determined after storage for various intervals at 4, 24 and 37 degrees C. The 5 tuberculin units (TU) per 0.1 ml dose solutions were bioequivalent to a non-stabilized solution of PPD-S whereas the 1 TU and 250 TU per dose solutions were equivalent by calculation to a non-stabilized solution of PPD-S. It was found that the PPD solutions of all 3 strengths, 1, 5 and 250 TU per dose, were stable for at least 3 years at 4 degrees C and for 2 years at room temperature (24 degrees C). Even at 37 degrees C the solutions of all 3 strengths were stable for at least 1 year. The stability of Connaught tuberculin PPD solutions has not been affected by the changes in formulation. The stability data suggest that the expiry date of the newly formulated tuberculin products could be at least two years from the data of the last satisfactory potency test. Although these products are stable for at least 1 year even at 37 degrees C, we nonetheless agree with the Canadian and U.S. regulations that they be stored at 2 to 8 degrees C in their original containers.

Impact of metal-induced degradation on the determination of pharmaceutical compound purity and a strategy for mitigation.

PubMed

Dotterer, Sally K; Forbes, Robert A; Hammill, Cynthia L

2011-04-05

Case studies are presented demonstrating how exposure to traces of transition metals such as copper and/or iron during sample preparation or analysis can impact the accuracy of purity analysis of pharmaceuticals. Some compounds, such as phenols and indoles, react with metals in the presence of oxygen to produce metal-induced oxidative decomposition products. Compounds susceptible to metal-induced decomposition can degrade following preparation for purity analysis leading to falsely high impurity results. Our work has shown even metals at levels below 0.1 ppm can negatively impact susceptible compounds. Falsely low results are also possible when the impurities themselves react with metals and degrade prior to analysis. Traces of metals in the HPLC mobile phase can lead to chromatographic artifacts, affecting the reproducibility of purity results. To understand and mitigate the impact of metal induced decomposition, a proactive strategy is presented. The pharmaceutical would first be tested for reactivity with specific transition metals in the sample solvent/diluents and in the HPLC mobile phase. If found to be reactive, alternative sample diluents and/or mobile phases with less reactive solvents or addition of a metal chelator would be explored. If unsuccessful, glassware cleaning or sample solution refrigeration could be investigated. By employing this strategy during method development, robust purity methods would be delivered to the quality control laboratories, preventing future problems from potential sporadic contamination of glassware with metals. Copyright © 2010 Elsevier B.V. All rights reserved.

Evaluation of a computer-assisted, kinetics-based enzyme-linked immunosorbent assay for detection of coronavirus antibodies in cats.

PubMed Central

Barlough, J E; Jacobson, R H; Downing, D R; Marcella, K L; Lynch, T J; Scott, F W

1983-01-01

A computer-assisted, kinetics-based enzyme-linked immunosorbent assay was adapted for the detection of coronavirus antibodies in feline serum. An alkaline antigen diluent (carbonate-bicarbonate buffer, pH 9.6) used in initial experiments produced diffuse, nonspecific color reactions in both viral and control antigen cuvettes which were correlated, paradoxically, with coronavirus antibody levels in test sera. These interfering reactions were minimized by use of lower-pH antigen diluents such as water and phosphate-buffered saline. Background kinetics-based enzyme-linked immunosorbent assay reactivity directed against a noncoronaviral component of antigen tissue culture fluids could then detected in numerous sera, particularly in samples with lower titers. Much of this reactivity was shown to be associated with bovine gamma globulins in cell culture fluid. It was not serum lot or species specific, since a variety of bovine serum lots as well as individual lots of serum from other mammalian and avian species reacted. Reactivity was markedly reduced when cells for antigen preparation were grown in gamma globulin-free bovine serum. Generation of corrected slope values from the kinetics-based enzyme-linked immunosorbent assay made it possible to correct for residual background reactivity in individual test sera and thus eliminate a potentially major source of false-positive reactions. Collectively, these studies indicated that the control of nonspecific reactivity in feline coronavirus serology is absolutely essential to obtain useful estimates of specific antibody responses. PMID:6300184

Evaluation of a computer-assisted, kinetics-based enzyme-linked immunosorbent assay for detection of coronavirus antibodies in cats.

PubMed

Barlough, J E; Jacobson, R H; Downing, D R; Marcella, K L; Lynch, T J; Scott, F W

1983-02-01

A computer-assisted, kinetics-based enzyme-linked immunosorbent assay was adapted for the detection of coronavirus antibodies in feline serum. An alkaline antigen diluent (carbonate-bicarbonate buffer, pH 9.6) used in initial experiments produced diffuse, nonspecific color reactions in both viral and control antigen cuvettes which were correlated, paradoxically, with coronavirus antibody levels in test sera. These interfering reactions were minimized by use of lower-pH antigen diluents such as water and phosphate-buffered saline. Background kinetics-based enzyme-linked immunosorbent assay reactivity directed against a noncoronaviral component of antigen tissue culture fluids could then detected in numerous sera, particularly in samples with lower titers. Much of this reactivity was shown to be associated with bovine gamma globulins in cell culture fluid. It was not serum lot or species specific, since a variety of bovine serum lots as well as individual lots of serum from other mammalian and avian species reacted. Reactivity was markedly reduced when cells for antigen preparation were grown in gamma globulin-free bovine serum. Generation of corrected slope values from the kinetics-based enzyme-linked immunosorbent assay made it possible to correct for residual background reactivity in individual test sera and thus eliminate a potentially major source of false-positive reactions. Collectively, these studies indicated that the control of nonspecific reactivity in feline coronavirus serology is absolutely essential to obtain useful estimates of specific antibody responses.

Effects of diluents and plasma on honey bee (Apis mellifera L.) drone frozen-thawed semen fertility.

PubMed

Gül, Aziz; Şahinler, Nuray; Onal, Ali G; Hopkins, Brandon K; Sheppard, Walter S

2017-10-01

Cryopreservation is an advanced method used to protect germplasm in liquid nitrogen. Honey bees are of special interest to protect because of their pollination activity and critical role in agriculture. There has been important progress in the cryopreservation of honey bee germplasm in recent years, leading to practical recovery of genetic material for breeding purposes following freezing. However, there remains room for improvement and the goal of the present study was to evaluate the effect of different "extenders" added post-thaw on the fertilization rate of cryopreserved honey bee semen. The purpose of adding extender post-thaw was to dilute the cryoprotectant to remove chemicals after centrifugation because of potential adverse effects. The control consisted of frozen-thawed semen without the addition of an extender; treatment groups included the addition of one of the following extenders: glucose solution, fresh ram semen plasma, fresh honey bee semen plasma, extender solution. All of the above treatments and frozen-thawed control were compared to fresh semen. For each group, 15 virgin queens were instrumentally inseminated with the semen-diluent solution and introduced into nucleus colonies to determine the brood patterns of the queens. Percentages of worker brood produced in the fresh semen, frozen-thawed semen control, glucose, fresh ram semen plasma, fresh honey bee semen plasma, and extender solution supplemented groups were 98.±1.1%, 47.0 ± 0.9%, 3.0 ± 0.8%, 0.3 ± 0.1%, 48.1 ± 4.1% and 40.3 ± 2.4%, respectively. Similiarly, spermatozoa numbers in the spermathecae of the same treatment groups were 3.6 × 10 6 , 1.6 × 10 6 , 7.3 × 10 5 , 4.7 × 10 5 , 8.1 × 10 5 , and 4.6 × 10 5 spermatozoa for the same treatment, respectively. The differences in both worker brood percentage and sperm count in the spermatheca were statistically significant (P < 0.01) among all treatment groups, except the frozen-thawed control group and fresh drone semen plasma group. We found a positive correlation between sperm count in the spermatheca and the percentage of worker brood (r = 0.91). With the exception of fresh honey bee semen plasma, the fertility rate was reduced following the addition of various plasmas and diluents post-freezing. Copyright © 2017 Elsevier Inc. All rights reserved.

Premixed Atmosphere and Convection Influences on Flame Inhibition and Combustion (Pacific)

NASA Technical Reports Server (NTRS)

Honda, Linton K.; Ronney, Paul D.

1997-01-01

Flame spread over flat solid fuel beds is a useful paradigm for studying the behavior of more complex two-phase nonpremixed flames. For practical applications, two of the most important elements of flame spreading are the effects of (1) the ambient atmosphere (e.g. pressure and composition) and (2) the flow environment on the spread rate and extinction conditions. Concerning (1), studies of flame spread in vitiated air and non-standard atmospheres such as those found in undersea vessels and spacecraft are particularly important for the assessment of fire hazards in these environments as well as determination of the effectiveness of fire suppressants. Concerning (2), the flow environment may vary widely even when no forced flow is present because of buoyancy effects. Consequently, the goal of this work is to employ microgravity (micro g) experiments to extend previous studies of the effects of ambient atmosphere and the flow environment on flame spread through the use of microgravity (micro g) experiments. Because of the considerable differences between upward (concurrent-flow) and downward (opposed-flow) flame spread at 1g (Williams, 1976, Fernandez-Pello, 1984), in this work both upward and downward 1g spread are tested. Two types of changes to the oxidizing atmosphere are considered in this work. One is the addition of sub-flammability-limit concentrations of a gaseous fuel ('partially premixed' atmospheres). This is of interest because in fires in enclosures, combustion may occur under poorly ventilated conditions, so that oxygen is partially depleted from the air and is replaced by combustible gases such as fuel vapors, H2 or CO. Subsequent fire spread over the solid fuel could occur under conditions of varying oxygen and gaseous fuel content. The potential significance of flame spread under vitiated or partially premixed conditions has been noted previously (Beyler, 1984). The second change is the diluent type, which affects the radiative properties of the mixture as well as the Lewis number (Le) of the reactants in the atmosphere, which for oxygen is defined as the thermal diffusivity of the bulk mixture divided by the mass diffusivity of oxygen into the bulk mixture. Understanding the effect of diluent type is desirable because in some undersea and spaceborne habitations, it is desirable to use diluent gases other than nitrogen. Prior experiments have shown that both radiation (Bhattacharjee and Altenkirch, 1993) and Lewis number (Zhang et al, 1992) effects are important in flame spreading problems.

Particle interaction of lubricated or unlubricated binary mixtures according to their particle size and densification mechanism.

PubMed

Di Martino, Piera; Joiris, Etienne; Martelli, Sante

2004-09-01

The aim of this study is to assess an experimental approach for technological development of a direct compression formulation. A simple formula was considered composed by an active ingredient, a diluent and a lubricant. The active ingredient and diluent were selected as an example according to their typical densification mechanism: the nitrofurantoine, a fragmenting material, and the cellulose microcrystalline (Vivapur), which is a typical visco-elastic material, equally displaying good bind and disintegrant properties. For each ingredient, samples of different particle size distribution were selected. Initially, tabletability of pure materials was studied by a rotary press without magnesium stearate. Vivapur tabletability decreases with increase in particle size. The addition of magnesium stearate as lubricant decreases tabletability of Vivapur of greater particle size, while it kept unmodified that of Vivapur of lower particle size. Differences in tabletability can be related to differences in particle-particle interactions; for Vivapur of higher particle size (Vivapur 200, 102 and 101), the lower surface area develops lower surface available for bonds, while for Vivapur of lower particle size (99 and 105) the greater surface area allows high particle proximity favouring particle cohesivity. Nitrofurantoine shows great differences in compression behaviour according to its particle size distribution. Large crystals show poorer tabletability than fine crystals, further decreased by lubricant addition. The large crystals poor tabletability is due to their poor compactibility, in spite of high compressibility and plastic intrinsic deformability; in fact, in spite of the high densification tendency, the nature of the involved bonds is very weak. Nitrofurantoine samples were then mixed with Vivapurs in different proportions. Compression behaviour of binary mixes (tabletability and compressibility) was then evaluated according to diluents proportion in the mixes. The mix of either nitrofurantoine large crystals or fine crystals with cellulose microcrystalline showed a negative interaction in all proportions, whatever particle sizes. The lubricant addition induced a positive interaction with Vivapur of greater particle size distribution (200, 102 and 101) favouring higher particle adhesivity, while it maintained unaltered that of Vivapurs of lower particle size (105 and 99). Definitely, when cohesive forces are predominant (Vivapur 105 and 99), the establishment of adhesive bonds between nitrofurantoine and Vivapur remain unnoticed; on the contrary, when cohesion bonds between microcrystalline cellulose particles are weakened by the presence of magnesium stearate, the existence of adhesion bonds between particles of different nature is in evidence, leading to a positive interaction.

Reliability of high strain ionomeric polymer transducers fabricated using the direct assembly process

NASA Astrophysics Data System (ADS)

Akle, Barbar; Nawshin, Saila; Leo, Donald

2007-04-01

Ionomeric polymer transducers have received considerable attention in the past several years. These actuators, sometimes referred to as artificial muscles, have the ability to generate large bending strain and moderate stress at low applied voltages. As sensors, ionic polymer transducers generate an electric response due to mechanical strain. Typically, ionic polymer transducers are composed of Nafion-117 membranes with platinum electrodes and are saturated with water diluents. Recently the authors have developed a novel fabrication technique called the direct assembly process (DAP), which allowed improved control of the electrode morphology and composition. The DAP consists of spraying two high surface area metal-ionomer electrodes on a Nafion membrane. The benefits of the DAP process over previous methods is the ability to control the thickness of the electrode, the ability to control the composition of the electrode layer of the transducer, and the ability for it to be used with a wide variety of diluents. In past work we have demonstrated that platinum, ruthenium dioxide, and single-walled carbon nanotubes can be used as electrode material with diluents such as water, formamide, and ionic liquids. In this work we will present a reliability study of transducers fabricated using the DAP. Water-hydrated transducers dehydrate and stop moving within 5 min while operating in air under the application of ± 2 V. Ionic liquid based transducers are demonstrated to operate in air for over 400 000 cycles with little loss in performance, and are reliable up to 1 million cycles with a performance loss of less than 43%. The main source of degradation is the adhesion of the conductive surface to the high surface area electrode. This is enhanced in this study by using a PUU linking polymer that has good adhesion properties to gold. Large voltage and large strain are proven to decrease the life of the transducer. Formamide based samples are stable for 3 days under a 1 V actuation signal, while they are only reliable for 3-4 h under a 2 V actuation signal. Solvent evaporation is the main reason for degradation in formamide samples and it is increased at 2 V, indicating some electrochemical activity at such high voltages. Finally the initial drop in performance and the fluctuation in the generated strain are shown to be due to the loss of humidity absorbed from ambient air and the fluctuation in this ambient humidity, respectively.

Proof of the Feasibility of Coherent and Incoherent Schemes for Pumping a Gamma-Ray Laser

DTIC Science & Technology

1989-06-01

contribution of the working medium to the absorption of the primary photoelectrons would be dominated by the effects of the diluent. 10 Be t 1 o2K 1 1 C...necessary. In 1928 the com-lete theory for the effect was worked out by Klein and Nishina using Dirac’s relativistic theory of the electron. The...Y(b) Null effect obtained with a Cu bridge. As shown in Table I, the transport of the spa waves The authors acknowledge the support of this work by

Trip report. Eurochemic company assistance: Hanford Atomic Products Operation spent fuel processing technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shank, E.M.

1959-06-23

Information obtained from HAPO during visit by M.K. Twichell, UCNC, and E.M. Shank, ORNL, is given. Included are the tentative procedures for obtaining and transmitting information to the Eurochemic company. Discussions are given on pulsed columns, corrosion, puse generators, centrifuges, valves, in-line instrumentation, evaporators, resin column design, off-gas processing, solvent recovery, liquid-waste handling, process control, equipment decontamination, criticality, radiation protection, diluent, and solvent stability, backmixing in a pulsed column, and use of 40% TBP in the purex flowsheet.

Effect of rapid warming of boar semen on sperm morphology and physiology.

PubMed

Bamba, K; Cran, D G

1985-09-01

The effect of rapid dilution (1:8 with BTS or 1:6.5 with KRP) and temperature change on sperm morphology and physiology were studied using boar spermatozoa pre-diluted in BF5 diluent. Rapid dilution of cold semen (5 degrees C) with a warm solution (37 degrees C) caused marked acrosomal changes which were most prominent in the anterior region. The acrosomal damage appeared to be caused mainly by rapid warming. In contrast to rapid cooling, rapid warming had little effect upon motility, glutamic-oxaloacetic transaminase release and respiration.

The cycle life chemistry of ambient-temperature secondary lithium cells

NASA Technical Reports Server (NTRS)

Somoano, R.; Carter, B. J.; Subba Rao, S.; Shen, D.; Yen, S. P. S.

1985-01-01

The Jet Propulsion Laboratory is involved in a NASA-sponsored research program to demonstrate the feasibility of ambient-temperature secondary lithium batteries for geosynchronous space applications. Encouraging cycle life has been demonstrated in sealed, cathode-limited laboratory cells. However, the cell capacity declines with cycle life. The results of recent studies of the lithium electrode passivation chemistry, and of conductive diluents for TiS2 cathodes and their possible contribution to capacity decline, are here presented. Technical issues associated with the unique operational requirements of a geosynchronous mission are also described.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mezyk, Stephen P.; Mincher, Bruce J.; Nilsson, Mikael

This document is the final report for the Nuclear Energy Universities Program (NEUP) grant 10-910 (DE-AC07-05ID14517) “Alpha Radiolysis of Nuclear Solvent Extraction Ligands used for An(III) and Ln(III) Separations”. The goal of this work was to obtain a quantitative understanding of the impacts of both low Linear Energy Transfer (LET, gamma-rays) and high LET (alpha particles) radiation chemistry occurring in future large-scale separations processes. This quantitative understanding of the major radiation effects on diluents and ligands is essential for optimal process implementation, and could result in significant cost savings in the future.

Cardiovascular responses to glucagon - Physiologic measurement by external recordings.

NASA Technical Reports Server (NTRS)

Byrne, M. J.; Pigott, V.; Spodick, D. H.

1972-01-01

Assessment by noninvasive polygraphic techniques of the cardiovascular responses of normal subjects to intravenous injections of glucagon and glucagon diluent. A blinding procedure which eliminated observer bias was used during the reading of tracings. Analysis of group results showed that glucagon provoked uniformly significant changes, including increase in heart rate, blood pressure, pressure-rate product, and ejection time index, and decrease in prejection period, mechanical and electromechanical systole, left ventricular ejection time, and the ratio PEP/LVET. The principal results correlated well with those of previous studies of the hemodynamic effects of glucagon.

Kinetics of the reaction of Cl atoms with CHCl 3 over the temperature range 253-313 K

NASA Astrophysics Data System (ADS)

Nilsson, Elna J. K.; Hoff, Janus; Nielsen, Ole John; Johnson, Matthew S.

2010-07-01

The reaction CHCl 3 + Cl → CCl 3 + HCl was studied in the atmospherically relevant temperature range from 253 to 313 K and in 930 mbar of N 2 diluent using the relative rate method. A temperature dependent reaction rate constant, valid in the temperature range 220-330 K, was determined by a fit to the result of the present study and that of Orlando (1999); k = (3.77 ± 0.32) × 10 -12 exp((-1011 ± 24)/T) cm 3 molecule -1 s -1.

Condensate Recycling in Closed Plant Growth Chambers

NASA Technical Reports Server (NTRS)

Bledsoe, J. O.; Sager, J. C.; Fortson, R. E.

1994-01-01

Water used in the the Controlled Ecological Life Support System (CELSS) Breadboard Project at the Kennedy Space Center is being recycled. Condensation is collected in the air ducts, filtered and deionized, and resupplied to the system for nutrient solutions, supplemental humidification, solvents and diluents. While the system functions well from a process control standpoint, precise and accurate tracking of water movement through the system to answer plant physiological questions is not consistent. Possible causes include hardware errors, undetected vapor loss from chamber leakage, and unmeasured changes in water volume in the plant growth trays.

Low emissions compression ignited engine technology

DOEpatents

Coleman, Gerald N [Dunlap, IL; Kilkenny, Jonathan P [Peoria, IL; Fluga, Eric C [Dunlap, IL; Duffy, Kevin P [East Peoria, IL

2007-04-03

A method and apparatus for operating a compression ignition engine having a cylinder wall, a piston, and a head defining a combustion chamber. The method and apparatus includes delivering fuel substantially uniformly into the combustion chamber, the fuel being dispersed throughout the combustion chamber and spaced from the cylinder wall, delivering an oxidant into the combustion chamber sufficient to support combustion at a first predetermined combustion duration, and delivering a diluent into the combustion chamber sufficient to change the first predetermined combustion duration to a second predetermined combustion duration different from the first predetermined combustion duration.

Commutability of Cytomegalovirus WHO International Standard in Different Matrices

PubMed Central

Jones, Sara; Webb, Erika M.; Barry, Catherine P.; Choi, Won S.; Abravaya, Klara B.; Schneider, George J.

2016-01-01

Commutability of quantitative standards allows patient results to be compared across molecular diagnostic methods and laboratories. This is critical to establishing quantitative thresholds for use in clinical decision-making. A matrix effect associated with the 1st cytomegalovirus (CMV) WHO international standard (IS) was identified using the Abbott RealTime CMV assay. A commutability study was performed to compare the CMV WHO IS and patient specimens diluted in plasma and whole blood. Patient specimens showed similar CMV DNA quantitation values regardless of the diluent or extraction procedure used. The CMV WHO IS, on the other hand, exhibited a matrix effect. The CMV concentration reported for the WHO IS diluted in plasma was within the 95% prediction interval established with patient samples. In contrast, the reported DNA concentration of the CMV WHO IS diluted in whole blood was reduced approximately 0.4 log copies/ml, and values fell outside the 95% prediction interval. Calibrating the assay by using the CMV WHO IS diluted in whole blood would introduce a bias for CMV whole-blood quantitation; samples would be reported as having higher measured concentrations, by approximately 0.4 log IU/ml. Based on the commutability study with patient samples, the RealTime CMV assay was standardized based on the CMV WHO IS diluted in plasma. A revision of the instructions for use of the CMV WHO IS should be considered to alert users of the potential impact from the diluent matrix. The identification of a matrix effect with the CMV WHO IS underscores the importance of assessing commutability of the IS in order to achieve consistent results across methods. PMID:27030491

Tuberculin-induced delayed-type hypersensitivity reaction in a model of hu-PBMC-SCID mice grafted with autologous skin.

PubMed Central

Tsicopoulos, A.; Pestel, J.; Fahy, O.; Vorng, H.; Vandenbusche, F.; Porte, H.; Eraldi, L.; Wurtz, A.; Akoum, H.; Hamid, Q.; Wallaert, B.; Tonnel, A. B.

1998-01-01

We have developed an animal model to study human delayed-type hypersensitivity reactions. Previous studies in humans have shown after tuberculin injection the presence of a mononuclear cell infiltration, with almost no eosinophils, associated with a preferential Th-1-type cytokine profile. Human skin graft obtained from tuberculin-reactive donors was grafted onto the back of severe combined immunodeficient mice. After healing, mice were reconstituted intraperitoneally with peripheral mononuclear cells. Tuberculin and diluent were injected intradermally, and skin biopsies were performed 72 hours later. Skin grafts were divided into two parts, one for immunohistochemistry and one for in situ hybridization studies. Immunohistochemistry was performed on cryostat sections using the alkaline phosphatase anti-alkaline phosphatase technique. In the tuberculin-injected sites as compared with the diluent-injected sites, there were significant increases in the number of CD45+ pan leukocytes and CD4+, CD8+, CD45RO+ T cells but not in CD68+ monocytes/macrophages and EG2 or MBP+ eosinophils. The activation markers CD25 and HLA-DR were up-regulated in the tuberculin-injected sites. In situ hybridization was performed using 35S-labeled riboprobes for interleukin (IL)-2, interferon (IFN)-gamma, IL-4, and IL-5. After tuberculin injection, a preferential Th-1-type cytokine profile was observed with significant increases in the numbers of IL-2 and IFN-gamma mRNA-expressing cells. These results are similar to those reported after tuberculin-induced delayed-type hypersensitivity in humans, suggesting that this model might be useful to study cutaneous inflammatory reaction. Images Figure 4 PMID:9626072

Tuberculin-induced delayed-type hypersensitivity reaction in a model of hu-PBMC-SCID mice grafted with autologous skin.

PubMed

Tsicopoulos, A; Pestel, J; Fahy, O; Vorng, H; Vandenbusche, F; Porte, H; Eraldi, L; Wurtz, A; Akoum, H; Hamid, Q; Wallaert, B; Tonnel, A B

1998-06-01

We have developed an animal model to study human delayed-type hypersensitivity reactions. Previous studies in humans have shown after tuberculin injection the presence of a mononuclear cell infiltration, with almost no eosinophils, associated with a preferential Th-1-type cytokine profile. Human skin graft obtained from tuberculin-reactive donors was grafted onto the back of severe combined immunodeficient mice. After healing, mice were reconstituted intraperitoneally with peripheral mononuclear cells. Tuberculin and diluent were injected intradermally, and skin biopsies were performed 72 hours later. Skin grafts were divided into two parts, one for immunohistochemistry and one for in situ hybridization studies. Immunohistochemistry was performed on cryostat sections using the alkaline phosphatase anti-alkaline phosphatase technique. In the tuberculin-injected sites as compared with the diluent-injected sites, there were significant increases in the number of CD45+ pan leukocytes and CD4+, CD8+, CD45RO+ T cells but not in CD68+ monocytes/macrophages and EG2 or MBP+ eosinophils. The activation markers CD25 and HLA-DR were up-regulated in the tuberculin-injected sites. In situ hybridization was performed using 35S-labeled riboprobes for interleukin (IL)-2, interferon (IFN)-gamma, IL-4, and IL-5. After tuberculin injection, a preferential Th-1-type cytokine profile was observed with significant increases in the numbers of IL-2 and IFN-gamma mRNA-expressing cells. These results are similar to those reported after tuberculin-induced delayed-type hypersensitivity in humans, suggesting that this model might be useful to study cutaneous inflammatory reaction.

High-speed imaging of inhomogeneous ignition in a shock tube

NASA Astrophysics Data System (ADS)

Tulgestke, A. M.; Johnson, S. E.; Davidson, D. F.; Hanson, R. K.

2018-05-01

Homogeneous and inhomogeneous ignition of real and surrogate fuels were imaged in two Stanford shock tubes, revealing the influence of small particle fragmentation. n-Heptane, iso-octane, and Jet A were studied, each mixed in an oxidizer containing 21% oxygen and ignited at low temperatures (900-1000 K), low pressures (1-2 atm), with an equivalence ratio of 0.5. Visible images (350-1050 nm) were captured through the shock tube endwall using a high-speed camera. Particles were found to arrive near the endwalls of the shock tubes approximately 5 ms after reflection of the incident shock wave. Reflected shock wave experiments using diaphragm materials of Lexan and steel were investigated. Particles collected from the shock tubes after each experiment were found to match the material of the diaphragm burst during the experiment. Following each experiment, the shock tubes were cleaned by scrubbing with cotton cloths soaked with acetone. Particles were observed to fragment after arrival near the endwall, often leading to inhomogeneous ignition of the fuel. Distinctly more particles were observed during experiments using steel diaphragms. In experiments exhibiting inhomogeneous ignition, flames were observed to grow radially until all the fuel within the cross section of the shock tube had been consumed. The influence of diluent gas (argon or helium) was also investigated. The use of He diluent gas was found to suppress the number of particles capable of causing inhomogeneous flames. The use of He thus allowed time history studies of ignition to extend past the test times that would have been limited by inhomogeneous ignition.

Hydroxyurea-Lactose Interaction Study: In Silico and In Vitro Evaluation.

PubMed

Bachchhao, Kunal B; Patil, R R; Patil, C R; Patil, Dipak D

2017-11-01

The Maillard reaction between hydroxyurea (a primary amine-containing drug) and lactose (used as an excipient) was explored. The adduct of these compounds was synthesized by heating hydroxyurea with lactose monohydrate at 60 °C in borate buffer (pH 9.2) for 12 h. Synthesis of the adduct was confirmed using UV-visible spectroscopy and Fourier transform infrared, differential scanning calorimetry, high-pressure liquid chromatography, and liquid chromatography-mass spectrometry studies. An in silico investigation of how the adduct formation affected the interactions of hydroxyurea with its biological target oxyhemoglobin, to which it binds to generate nitric oxide and regulates fetal hemoglobin synthesis, was carried out. The in silico evaluations were complemented by an in vitro assay of the anti-sickling activity. Co-incubation of hydroxyurea with deoxygenated blood samples reduced the percentage of sickled cells from 38% to 12 ± 1.6%, whereas the percentage of sickled cells in samples treated with the adduct was 17 ± 1.2%. This indicated loss of anti-sickling activity in the case of the adduct. This study confirmed that hydroxyurea can participate in a Maillard reaction if lactose is used as a diluent. Although an extended study at environmentally feasible temperatures was not carried out in the present investigation, the partial loss of the anti-sickling activity of hydroxyurea was investigated along with the in silico drug-target interactions. The results indicated that the use of lactose in hydroxyurea formulations needs urgent reconsideration and that lactose must be replaced by other diluents that do not form Maillard adducts.

The economics of a pharmacy-based central intravenous additive service for paediatric patients.

PubMed

Armour, D J; Cairns, C J; Costello, I; Riley, S J; Davies, E G

1996-10-01

This study was designed to compare the costs of a pharmacy-based Central Intravenous Additive Service (CIVAS) with those of traditional ward-based preparation of intravenous doses for a paediatric population. Labour costs were derived from timings of preparation of individual doses in both the pharmacy and ward by an independent observer. The use of disposables and diluents was recorded and their acquisition costs apportioned to the cost of each dose prepared. Data were collected from 20 CIVAS sessions (501 doses) and 26 ward-based sessions (30 doses). In addition, the costs avoided by the use of part vials in CIVAS was calculated. This was derived from a total of 50 CIVAS sessions. Labour, disposable and diluent costs were significantly lower for CIVAS compared with ward-based preparation (p < 0.001). The ratio of costs per dose [in 1994 pounds sterling] between ward and pharmacy was 2.35:1 (2.51 pounds:1.07 pounds). Sensitivity analysis of the best and worst staff mixes in both locations ranged from 2.3:1 to 4.0:1, always in favour of CIVAS. There were considerable costs avoided in CIVAS from the multiple use of vials; the estimated annual sum derived from the study was 44,000 pounds. In addition, CIVAS was less vulnerable to unanticipated interruptions in work flow than ward-based preparation. CIVAS for children was more economical than traditional ward-based preparation, because of a cost-minimisation effect. Sensitivity analysis showed that these advantages were maintained over a full range of skill mixes. Additionally, significant savings accrued from the multiple use of vials in CIVAS.

Accurate Determination of Soluble Axl by Enzyme-Linked Immunosorbent Assay.

PubMed

Dengler, Mirko; Huber, Heidemarie; Müller, Christian J; Zellmer, Angela; Rauch, Peter; Mikulits, Wolfgang

2016-11-01

Levels of soluble Axl (sAxl) are routinely assessed in human sera by sandwich enzyme-linked immunosorbent assay (ELISA). Although sAxl values are suggested to diagnose different types of disorders, no uniform ELISA method is available, allowing the reliable interassay comparison between results. Furthermore, little is known about the stability of sAxl under storage conditions, which is a relevant parameter for biomedical trials. The evaluation of sAxl stability under various stress conditions and the determination of proper conditions to use the sAxl ELISA for routine clinical applications are of great interest. In this study, serum samples were subjected to freeze-thaw cycles and incubation at different temperatures to analyze the stability of sAxl by ELISA. Dilution and spike-in experiments were carried out to examine the impact of serum and diluent components on the ELISA performance. Various diluents and media were employed to resolve masking effects of the serum. The assay components were further optimized for long-term usability by treatment with stabilizers and validation under temperature stress. Indeed, sAxl showed long-term stability in serum during freeze-thaw cycles and incubation under temperature stress conditions. The dilution experiments revealed that unknown components in the serum caused masking effects that can be reduced by proper dilutions. The assay performance was further increased by using a standardized buffer system to dilute serum samples. Stabilization of coated plates and of streptavidin-horseradish peroxidase allowed long-term storage for up to 6 months. In sum, our data demonstrate proper ELISA conditions, allowing the accurate analysis of sAxl levels in human serum.

Production of super-smooth articles

DOEpatents

Duchane, David V.

1983-01-01

Super-smooth rounded or formed articles made of thermoplastic materials including various poly(methyl methacrylate) or acrylonitrile-butadiene-styrene copolymers are produced by immersing the articles into a bath, the composition of which is slowly changed with time. The starting composition of the bath is made up of at least one solvent for the polymer and a diluent made up of at least one nonsolvent for the polymer and optional materials which are soluble in the bath. The resulting extremely smooth articles are useful as mandrels for laser fusion and should be useful for a wide variety of other purposes, for example lenses.

Fire extinguishing agents for oxygen-enriched atmospheres

NASA Astrophysics Data System (ADS)

Plugge, M. A.; Wilson, C. W.; Zallen, D. M.; Walker, J. L.

1985-12-01

Fire-suppression agent requirements for extinguishing fires in oxygen-enriched atmospheres were determined employing small-, medium-, large-, and full-scale test apparatuses. The small- and medium-scale tests showed that a doubling of the oxygen concentration required five times more HALON for extinguishment. For fires of similar size and intensity, the effect of oxygen enrichment of the diluent volume in the HC-131A was not as grate as in the smaller compartments of the B-52 which presented a higher damage scenario. The full-scale tests showed that damage to the airframe was as important a factor in extinguishment as oxygen enrichment.

Deuteron NMR (Nuclear Magnetic Resonance) in relation to the glass transition in polymers

NASA Technical Reports Server (NTRS)

Roessler, E.; Sillescu, H.; Spiess, H. W.; Wallwitz, R.

1983-01-01

H-2NMR is introduced as a tool for investigating slow molecular motion in the glass transition region of amorphous polymers. In particular, we compare H-2 spin alignment echo spectra of chain deuterated polystyrene with model calculations for restricted rotational Brownian motion. Molecular motion in the polyztyrene-toluene system has been investigated by analyzing H-2NMR of partially deuterated polystyrene and toluene, respectively. The diluent mobility in the mixed glass has been decomposed into solid and liquid components where the respective average correlation times differ by more than 5 decades.

Regeneration of sulfated metal oxides and carbonates

DOEpatents

Hubble, Bill R.; Siegel, Stanley; Cunningham, Paul T.

1978-03-28

Alkali metal or alkaline earth metal carbonates such as calcium carbonate and magnesium carbonate found in dolomite or limestone are employed for removal of sulfur dioxide from combustion exhaust gases. The sulfated carbonates are regenerated to oxides through use of a solid-solid reaction, particularly calcium sulfide with calcium sulfate to form calcium oxide and sulfur dioxide gas. The regeneration is performed by contacting the sulfated material with a reductant gas such as hydrogen within an inert diluent to produce calcium sulfide in mixture with the sulfate under process conditions selected to permit the sulfide-sulfate, solid-state reaction to occur.

Method for extracting lanthanides and actinides from acid solutions by modification of Purex solvent

DOEpatents

Horwitz, E.P.; Kalina, D.G.

1984-05-21

A process has been developed for the extraction of multivalent lanthanide and actinide values from acidic waste solutions, and for the separation of these values from fission product and other values, which utilizes a new series of neutral bi-functional extractants, the alkyl(phenyl)-N, N-dialkylcarbamoylmethylphosphine oxides, in combination with a phase modifier to form an extraction solution. The addition of the extractant to the Purex process extractant, tri-n-butylphosphate in normal paraffin hydrocarbon diluent, will permit the extraction of multivalent lanthanide and actinide values from 0.1 to 12.0 molar acid solutions.

The behavior and importance of lactic acid complexation in Talspeak extraction systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grimes, Travis S.; Nilsson, Mikael; Nash, Kenneth L.

2008-07-01

Advanced partitioning of spent nuclear fuel in the UREX +la process relies on the TALSPEAK process for separation of fission-product lanthanides from trivalent actinides. The classic TALSPEAK utilizes an aqueous medium of both lactic acid and diethylenetriaminepentaacetic acid and the extraction reagent di(2-ethylhexyl)phosphoric acid in an aromatic diluent. In this study, the specific role of lactic acid and the complexes involved in the extraction of the trivalent actinides and lanthanides have been investigated using {sup 14}C-labeled lactic acid. Our results show that lactic acid partitions between the phases in a complex fashion. (authors)

Chromium Toxicity Test for Fall Chinook Salmon (Oncorhynchus tshawytscha) Using Hanford Site Groundwater: Onsite Early Life-Stage Toxicity Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patton, Gregory W; Dauble, Dennis D; Chamness, Mickie A

The objective of this study was to evaluate site-specific effects for early life-stage (eyed eggs to free swimming juveniles) fall chinook salmon that might be exposed to hexavalent chromium from Hanford groundwater sources. Our exposure conditions included hexavalent chromium obtained from Hanford groundwater wells near the Columbia River, Columbia River water as the diluent, and locally adapted populations of fall chinook salmon. This report describes both a 96-hr pretest using rainbow trout eggs and an early life-stage test beginning with chinook salmon eggs.

Process for extracting technetium from alkaline solutions

DOEpatents

Moyer, Bruce A.; Sachleben, Richard A.; Bonnesen, Peter V.

1995-01-01

A process for extracting technetium values from an aqueous alkaline solution containing at least one alkali metal hydroxide and at least one alkali metal nitrate, the at least one alkali metal nitrate having a concentration of from about 0.1 to 6 molar. The solution is contacted with a solvent consisting of a crown ether in a diluent for a period of time sufficient to selectively extract the technetium values from the aqueous alkaline solution. The solvent containing the technetium values is separated from the aqueous alkaline solution and the technetium values are stripped from the solvent.

Preparation of Reference Material 8504, Transformer Oil

PubMed Central

Poster, Dianne L.; Schantz, Michele M.; Wise, Stephen A.

2005-01-01

A new reference material (RM), RM 8504, has been prepared for use as a diluent oil with Aroclors in transformer oil Standard Reference Materials (SRMs) 3075 to 3080 and SRM 3090 when developing and validating methods for the determination of polychlorinated biphenyls (PCBs) as Aroclors in transformer oil or similar matrices. SRMs 3075-3080 and SRM 3090 consist of individual Aroclors in the same transformer oil that was used to prepare RM 8504. A unit of RM 8504 consists of one bottle containing approximately 100 mL of transformer oil. No additional constituents have been added to the oil. PMID:27308183

Detonability of H/sub 2/-air-diluent mixtures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tieszen, S.R.; Sherman, M.P.; Benedick, W.B.

1987-06-01

This report describes the Heated Detonation Tube (HDT). Detonation cell width and velocity results are presented for H/sub 2/-air mixtures, undiluted and diluted with CO/sub 2/ and H/sub 2/O for a range of H/sub 2/ concentration, initial temperature and pressure. The results show that the addition of either CO/sub 2/ or H/sub 2/O significantly increases the detonation cell width and hence reduces the detonability of the mixture. The results also show that the detonation cell width is reduced (detonability is increased) for increased initial temperature and/or pressure.

Reduced and Validated Kinetic Mechanisms for Hydrogen-CO-sir Combustion in Gas Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yiguang Ju; Frederick Dryer

2009-02-07

Rigorous experimental, theoretical, and numerical investigation of various issues relevant to the development of reduced, validated kinetic mechanisms for synthetic gas combustion in gas turbines was carried out - including the construction of new radiation models for combusting flows, improvement of flame speed measurement techniques, measurements and chemical kinetic analysis of H{sub 2}/CO/CO{sub 2}/O{sub 2}/diluent mixtures, revision of the H{sub 2}/O{sub 2} kinetic model to improve flame speed prediction capabilities, and development of a multi-time scale algorithm to improve computational efficiency in reacting flow simulations.

Strong composition dependence of adhesive properties of ultraviolet curing adhesives with modified acrylates

NASA Astrophysics Data System (ADS)

Feng, Yefeng; Li, Yandong; Wang, Fupeng; Peng, Cheng; Xu, Zhichao; Hu, Jianbing

2018-05-01

Ultraviolet (UV) curable adhesives have been widely researched in fields of health care and electronic components. UV curing systems with modified acrylic ester prepolymers have been frequently employed. In order to clarify composition dependence of adhesive properties of adhesives containing modified acrylates, in this work, several UV curing adhesives bearing urethane and epoxy acrylates were designed and fabricated. The effects of prepolymer, diluent, feed ratio, initiator and assistant on adhesive performances were investigated. This work might offer a facile route to gain promising high-performance UV curable adhesives with desired adhesive traits through regulating their compositions.

Liquefaction process for solid carbonaceous materials containing alkaline earth metal humates

DOEpatents

Epperly, William R.; Deane, Barry C.; Brunson, Roy J.

1982-01-01

An improved liquefaction process wherein wall scale and particulate agglomeration during the liquefaction of solid carbonaceous materials containing alkaline earth metal humates is reduced and/or eliminated by subjecting the solid carbonaceous materials to controlled cyclic cavitation during liquefaction. It is important that the solid carbonaceous material be slurried in a suitable solvent or diluent during liquefaction. The cyclic cavitation may be imparted via pressure cycling, cyclic agitation and the like. When pressure cycling or the like is employed an amplitude equivalent to at least 25 psia is required to effectively remove scale from the liquefaction vessel walls.

A NMR (Nuclear Magnetic Resonance) Study of the Molecular Interactions and Dynamic Behavior in Polymer-Diluent Blends in the Solid State

DTIC Science & Technology

1988-07-25

The same time- tributions. As shown by Kaplan and Garroway 2 eq 1 can saving scheme can be adopted for r’s at the shorter 7 end be recast in the form...Foundation 1980, 13, 1127. EIiuipment Grant No. CHE 77-09059, of National Science (12) Kaplan, J. L.; Garroway , A. N. J. Magn. Resun. 1982, 49. 464...North Holland: New York, 1985; Vol. 12. 3. Kaplan, J.I., Garroway , A.M., J. Hag. Res. 1982, 49, 1 464. 4. Roy, A.K., Jones, A.A., Inglefield, P.T

Methods for deoxygenating biomass-derived pyrolysis oil

DOEpatents

Baird, Lance Awender; Brandvold, Timothy A.

2015-06-30

Methods for deoxygenating a biomass-derived pyrolysis oil are provided. A method for deoxygenating a biomass-derived pyrolysis oil comprising the steps of combining a biomass-derived pyrolysis oil stream with a heated low-oxygen-pyoil diluent recycle stream to form a heated diluted pyoil feed stream is provided. The heated diluted pyoil feed stream has a feed temperature of about 150.degree. C. or greater. The heated diluted pyoil feed stream is contacted with a first deoxygenating catalyst in the presence of hydrogen at first hydroprocessing conditions effective to form a low-oxygen biomass-derived pyrolysis oil effluent.

Detonability of hydrocarbon fuels in air

NASA Technical Reports Server (NTRS)

Beeson, H. D.; Mcclenagan, R. D.; Bishop, C. V.; Benz, F. J.; Pitz, W. J.; Westbrook, C. K.; Lee, J. H. S.

1991-01-01

Studies were conducted of the detonation of gas-phase mixtures of n-hexane and JP-4, with oxidizers as varied as air and pure oxygen, measuring detonation velocities and cell sizes as a function of stoichiometry and diluent concentration. The induction length of a one-dimensional Zeldovich-von Neumann-Doering detonation was calculated on the basis of a theoretical model that employed the reaction kinetics of the hydrocarbon fuels used. Critical energy and critical tube diameter are compared for a relative measure of the heavy hydrocarbon fuels studied; detonation sensitivity appears to increase slightly with increasing carbon number.

Preparation of dielectric coating of variable dielectric constant by plasma polymerization

NASA Technical Reports Server (NTRS)

Hudis, M.; Wydeven, T. (Inventor)

1979-01-01

A plasma polymerization process for the deposition of a dielectric polymer coating on a substrate comprising disposing of the substrate in a closed reactor between two temperature controlled electrodes connected to a power supply is presented. A vacuum is maintained within the closed reactor, causing a monomer gas or gas mixture of a monomer and diluent to flow into the reactor, generating a plasma between the electrodes. The vacuum varies and controls the dielectric constant of the polymer coating being deposited by regulating the gas total and partial pressure, the electric field strength and frequency, and the current density.

Method for depositing layers of high quality semiconductor material

DOEpatents

Guha, Subhendu; Yang, Chi C.

2001-08-14

Plasma deposition of substantially amorphous semiconductor materials is carried out under a set of deposition parameters which are selected so that the process operates near the amorphous/microcrystalline threshold. This threshold varies as a function of the thickness of the depositing semiconductor layer; and, deposition parameters, such as diluent gas concentrations, must be adjusted as a function of layer thickness. Also, this threshold varies as a function of the composition of the depositing layer, and in those instances where the layer composition is profiled throughout its thickness, deposition parameters must be adjusted accordingly so as to maintain the amorphous/microcrystalline threshold.

Evaluation of different fast melting disintegrants by means of a central composite design.

PubMed

Di Martino, Piera; Martelli, Sante; Wehrlé, Pascal

2005-01-01

Fast-disintegration technologies have encountered increased interest from industries in the past decades. In order to orientate the formulators to the choice of the best disintegrating agent, the most common disintegrants were selected and their ability to quickly disintegrate direct compressed tablets was evaluated. For this study, a central composite design was used. The main factors included were the concentration of disintegrant (X1) and the compression force (X2). These factors were studied for tablets containing either Zeparox or Pearlitol 200 as soluble diluents and six different disintegrants: L-HPC LH11 and LH31, Lycatab PGS, Vivasol, Kollidon CL, and Explotab. Their micromeritics properties were previously determined. The response variables were disintegration time (Y1), tensile strength (Y2), and porosity (Y3). Whatever the diluent, the longest disintegration time is obtained with Vivasol as the disintegrant, while Kollidon CL leads to the shortest disintegration times. Exception for Lycatab PGS and L-HPC LH11, formulations with Pearlitol 200 disintegrate faster. Almost the same results are obtained with porosity: no relevant effect of disintegrant concentration is observed, since porosity is mainly correlated to the compression force. In particular, highest values are obtained with Zeparox as the diluent when compared to Pearlitol 200 and, as the type of disintegrant is concerned, no difference is observed. Tensile strength models have been all statistically validated and are all highly dependent on the compression force. Lycatab PGS concentration does not affect disintegration time, mainly increased by the increase of compression pressure. When Pearlitol 200 is used with Vivasol, disintegration time is more influenced by the disintegrant concentration than by the compression pressure, an increase in concentration leading to a significant and relevant increase of the disintegration time. With Zeparox, the interaction between the two controlled variables is more complex: there is no effect of compression force on the disintegration time for a small amount of disintegrant, but a significant increase for higher concentrations. With Kollidon CL, the main factor influencing the disintegration time is the compression force, rather than the disintegrant concentration. Increasing both the compression force and the disintegrant concentration leads to an increase of the disintegration time. For lower Kollidon CL percentages, the compression pressure increases dramatically the tablet disintegration. With the Explotab, whatever the increase of compression force, the disintegrant concentration leads to an increase of the disintegration time. According to Student's t-test, only the compression force significantly and strongly influences the disintegration time when Pearlitol 200 is used. A slight interaction and some trends nevertheless appear: above 150 MPa, increasing the disintegrant concentration leads to a shortened disintegration time, below this limit the opposite effect is observed.

Immunochemistry for high-throughput screening of human exhaled breath condensate (EBC) media: implementation of automated Quanterix SIMOA instrumentation.

PubMed

Pleil, Joachim D; Angrish, Michelle M; Madden, Michael C

2015-12-11

Immunochemistry is an important clinical tool for indicating biological pathways leading towards disease. Standard enzyme-linked immunosorbent assays (ELISA) are labor intensive and lack sensitivity at low-level concentrations. Here we report on emerging technology implementing fully-automated ELISA capable of molecular level detection and describe application to exhaled breath condensate (EBC) samples. The Quanterix SIMOA HD-1 analyzer was evaluated for analytical performance for inflammatory cytokines (IL-6, TNF-α, IL-1β and IL-8). The system was challenged with human EBC representing the most dilute and analytically difficult of the biological media. Calibrations from synthetic samples and spiked EBC showed excellent linearity at trace levels (r(2)  >  0.99). Sensitivities varied by analyte, but were robust from ~0.006 (IL-6) to ~0.01 (TNF-α) pg ml(-1). All analytes demonstrated response suppression when diluted with deionized water and so assay buffer diluent was found to be a better choice. Analytical runs required ~45 min setup time for loading samples, reagents, calibrants, etc., after which the instrument performs without further intervention for up to 288 separate samples. Currently, available kits are limited to single-plex analyses and so sample volumes require adjustments. Sample dilutions should be made with assay diluent to avoid response suppression. Automation performs seamlessly and data are automatically analyzed and reported in spreadsheet format. The internal 5-parameter logistic (pl) calibration model should be supplemented with a linear regression spline at the very lowest analyte levels, (<1.3 pg ml(-1)). The implementation of the automated Quanterix platform was successfully demonstrated using EBC, which poses the greatest challenge to ELISA due to limited sample volumes and low protein levels.

Reduced sensitizing capacity of epoxy resin systems: a structure-activity relationship study.

PubMed

Niklasson, Ida B; Broo, Kerstin; Jonsson, Charlotte; Luthman, Kristina; Karlberg, Ann-Therese

2009-11-01

Epoxy resins can be prepared from numerous chemical compositions. Until recently, alternatives to epoxy resins based on diglycidyl ethers of bisphenol A (DGEBA) or bisphenol F (DGEBF) monomers have not received commercial interest, but are presently doing so, as epoxy resins with various properties are desired. Epoxy resin systems are known to cause allergic contact dermatitis because of contents of uncured monomers, reactive diluents, and hardeners. Reactive diluents, for example, glycidyl ethers, which also contain epoxide moieties, are added to reduce viscosity and improve polymerization. We have investigated the contact allergenic properties of a series of six analogues to phenyl glycidyl ether (PGE), all with similar basic structures but with varying carbon chain lengths and degrees of saturation. The chemical reactivity of the compounds in the test series toward the hexapeptide H-Pro-His-Cys-Lys-Arg-Met-OH was investigated. All epoxides were shown to bind covalently to both cysteine and proline residues. The percent depletion of nonreacted peptide was also studied resulting in 88% depletion when using PGE and 46% when using butyl glycidyl ether (5) at the same time point, thus revealing a large difference between the fastest and the slowest reacting epoxide. The skin sensitization potencies of the epoxides using the murine local lymph node assay (LLNA) were evaluated in relation to the observed physicochemical and reactivity properties. To enable determination of statistical significance between structurally closely related compounds, a nonpooled LLNA was performed. It was found that the compounds investigated ranged from strong to weak sensitizers, congruent with the reactivity data, indicating that even small changes in chemical structure result in significant differences in sensitizing capacity.

Impact of a heteroatom in a structure-activity relationship study on analogues of phenyl glycidyl ether (PGE) from epoxy resin systems.

PubMed

Niklasson, Ida B; Delaine, Tamara; Luthman, Kristina; Karlberg, Ann-Therese

2011-04-18

Epoxy resins are among the most common causes of occupational contact dermatitis. They are normally used in so-called epoxy resin systems (ERS). These commercial products are combinations of epoxy resins, curing agents, modifiers, and reactive diluents. The most frequently used resins are diglycidyl ethers based on bisphenol A (DGEBA) and bisphenol F (DGEBF). In this study, we have investigated the contact allergenic properties of a series of analogues to the reactive diluent phenyl glycidyl ether (PGE), all with similar basic structures but with varying heteroatoms or with no heteroatom present. The chemical reactivity of the compounds in the test series toward the hexapeptide H-Pro-His-Cys-Lys-Arg-Met-OH was investigated. All epoxides were shown to bind covalently to both cysteine and proline residues. The percent depletion of nonreacted peptide was also studied resulting in ca. 60% depletion when using either PGE, phenyl 2,3-epoxypropyl sulfide (2), or N-(2,3-epoxypropyl)aniline (3), and only 15% when using 1,2-epoxy-4-phenylbutane (4) at the same time point. The skin sensitization potencies of the epoxides using the murine local lymph node assay (LLNA) were evaluated in relation to the observed physicochemical and reactivity properties. To enable determination of statistical significance between structurally closely related compounds, a nonpooled LLNA was performed. It was found that all investigated compounds containing a heteroatom in the α-position to the epoxide were strong sensitizers, congruent with the reactivity data, indicating that the impact of a heteroatom is crucial for the sensitizing capacity for this type of epoxides.

A compliant, banded outflow cannula for decreased afterload sensitivity of rotary right ventricular assist devices.

PubMed

Gregory, Shaun D; Schummy, Emma; Pearcy, Mark; Pauls, Jo P; Tansley, Geoff; Fraser, John F; Timms, Daniel

2015-02-01

Biventricular support with dual rotary ventricular assist devices (VADs) has been implemented clinically with restriction of the right VAD (RVAD) outflow cannula to artificially increase afterload and, therefore, operate within recommended design speed ranges. However, the low preload and high afterload sensitivity of these devices increase the susceptibility of suction events. Active control systems are prone to sensor drift or inaccurate inferred (sensor-less) data, therefore an alternative solution may be of benefit. This study presents the in vitro evaluation of a compliant outflow cannula designed to passively decrease the afterload sensitivity of rotary RVADs and minimize left-sided suction events. A one-way fluid-structure interaction model was initially used to produce a design with suitable flow dynamics and radial deformation. The resultant geometry was cast with different initial cross-sectional restrictions and concentrations of a softening diluent before evaluation in a mock circulation loop. Pulmonary vascular resistance (PVR) was increased from 50 dyne s/cm(5) until left-sided suction events occurred with each compliant cannula and a rigid, 4.5 mm diameter outflow cannula for comparison. Early suction events (PVR ∼ 300 dyne s/cm(5) ) were observed with the rigid outflow cannula. Addition of the compliant section with an initial 3 mm diameter restriction and 10% diluent expanded the outflow restriction as PVR increased, thus increasing RVAD flow rate and preventing left-sided suction events at PVR levels beyond 1000 dyne s/cm(5) . Therefore, the compliant, restricted outflow cannula provided a passive control system to assist in the prevention of suction events with rotary biventricular support while maintaining pump speeds within normal ranges of operation. Copyright © 2014 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

Supplementing rooster sperm with Cholesterol-Loaded-Cyclodextrin improves fertility after cryopreservation.

PubMed

Chuaychu-Noo, Napapach; Thananurak, Pachara; Chankitisakul, Vibantita; Vongpralub, Thevin

2017-02-01

Little is known about the effects of Cholesterol-Loaded Cyclodextrin (CLC) on post-thaw semen quality in chicken. The aim of the present study is to investigate the efficacy of CLC levels (0, 1, 2 and 3 mg/mL Schramm diluent) on post-thawed semen quality and fertility in two breeds of chicken Pradu Hang Dum (native chicken) and Rhode Island Red. Semen samples of each breed were pooled, divided into 4 aliquots and diluted with Schramm diluents, cooled to 5 °C when DMF was added (6% of final volume). Semen straws were subjected to cryopreservation using the liquid nitrogen vapor method. Post-thawed sperm motility, viability, acrosome integrity, mitochondrial function, and the Malondialdehyde (MDA) level were determined. The fertility of frozen semen was tested by inseminating laying hens. Post-thaw motility between Pradu Hang Dum and Rhode Island Red was no different; but Rhode Island Red had a higher semen viability and live cell intact acrosomes than Pradu Hang Dum (P < 0.05). The percentage of high functioning mitochondria in the Pradu Hang Dum was higher than the Rhode Island Red. CLC at 2 and 3 mg/mL supplementation was associated with improved viability of frozen semen; that is, acrosome integrity and mitochondrial function (P < 0.01), albeit having no effect on MDA levels. The sperm with 1 mg/mL CLC yielded a significantly better fertility (P < 0.01). CLC (1 mg/mL) improved the quality of frozen rooster semen. There was no interaction among breeds and CLC on post-thaw semen quality and fertility. Copyright © 2017 Elsevier Inc. All rights reserved.

In ovo feeding of L-arginine alters energy metabolism in post-hatch broilers.

PubMed

Yu, L L; Gao, T; Zhao, M M; Lv, P A; Zhang, L; Li, J L; Jiang, Y; Gao, F; Zhou, G H

2018-01-01

This study aimed to investigate the effects of in ovo feeding (IOF) of L-arginine (Arg) on energy metabolism in post-hatch broilers. A total of 720 eggs was randomly assigned to 3 treatments: 1) non-injected control group, 2) 0.75% NaCl diluent-injected control group, and 3) 1.0% Arg solution-injected group. At 17.5 d of incubation, 0.6 mL of each solution was injected into the amniotic fluid of each egg of injected groups. After hatching, 80 male chicks were randomly assigned to each treatment group with 8 replicates per group. The results showed that IOF of Arg increased glycogen and glucose concentrations in the liver and pectoral muscle of broilers at hatch (P < 0.05). The plasma glucose and insulin levels were higher in the Arg group than in the non-injected and diluent-injected control groups (P < 0.05). Meanwhile, IOF of Arg enhanced the hepatic glucose-6-phosphatase (G6P) activity at hatch (P < 0.05). There was no difference in hexokinase (HK) or phosphofructokinase (PFK) enzyme activities in the pectoral muscle in all groups. Further, IOF of Arg increased the phosphoenolpyruvate carboxykinase (PEPCK) and fructose-1,6-bisphosphatase (FBP) mRNA expressions at hatch (P < 0.05). In addition, broilers in the Arg group had a higher mRNA expression of glycogen synthase and a lower expression of glycogen phosphorylase in the liver and pectoral muscles than in the non-injected controls at hatch (P < 0.05). In conclusion, IOF of Arg solution enhanced liver and pectoral muscle energy reserves at hatch, which might be considered as an effective strategy for regulating early energy metabolism in broilers. © 2017 Poultry Science Association Inc.

Genotoxicity of multi-walled carbon nanotubes at occupationally relevant doses

PubMed Central

2014-01-01

Carbon nanotubes are commercially-important products of nanotechnology; however, their low density and small size makes carbon nanotube respiratory exposures likely during their production or processing. We have previously shown mitotic spindle aberrations in cultured primary and immortalized human airway epithelial cells exposed to single-walled carbon nanotubes (SWCNT). In this study, we examined whether multi-walled carbon nanotubes (MWCNT) cause mitotic spindle damage in cultured cells at doses equivalent to 34 years of exposure at the NIOSH Recommended Exposure Limit (REL). MWCNT induced a dose responsive increase in disrupted centrosomes, abnormal mitotic spindles and aneuploid chromosome number 24 hours after exposure to 0.024, 0.24, 2.4 and 24 μg/cm2 MWCNT. Monopolar mitotic spindles comprised 95% of disrupted mitoses. Three-dimensional reconstructions of 0.1 μm optical sections showed carbon nanotubes integrated with microtubules, DNA and within the centrosome structure. Cell cycle analysis demonstrated a greater number of cells in S-phase and fewer cells in the G2 phase in MWCNT-treated compared to diluent control, indicating a G1/S block in the cell cycle. The monopolar phenotype of the disrupted mitotic spindles and the G1/S block in the cell cycle is in sharp contrast to the multi-polar spindle and G2 block in the cell cycle previously observed following exposure to SWCNT. One month following exposure to MWCNT there was a dramatic increase in both size and number of colonies compared to diluent control cultures, indicating a potential to pass the genetic damage to daughter cells. Our results demonstrate significant disruption of the mitotic spindle by MWCNT at occupationally relevant exposure levels. PMID:24479647

Diagnosing periprosthetic infection: false-positive intraoperative Gram stains.

PubMed

Oethinger, Margret; Warner, Debra K; Schindler, Susan A; Kobayashi, Hideo; Bauer, Thomas W

2011-04-01

Intraoperative Gram stains have a reported low sensitivity but high specificity when used to help diagnose periprosthetic infections. In early 2008, we recognized an unexpectedly high frequency of apparent false-positive Gram stains from revision arthroplasties. The purpose of this report is to describe the cause of these false-positive test results. We calculated the sensitivity and specificity of all intraoperative Gram stains submitted from revision arthroplasty cases during a 3-month interval using microbiologic cultures of the same samples as the gold standard. Methods of specimen harvesting, handling, transport, distribution, specimen processing including tissue grinding/macerating, Gram staining, and interpretation were studied. After a test modification, results of specimens were prospectively collected for a second 3-month interval, and the sensitivity and specificity of intraoperative Gram stains were calculated. The retrospective review of 269 Gram stains submitted from revision arthroplasties indicated historic sensitivity and specificity values of 23% and 92%, respectively. Systematic analysis of all steps of the procedure identified Gram-stained but nonviable bacteria in commercial broth reagents used as diluents for maceration of periprosthetic membranes before Gram staining and culture. Polymerase chain reaction and sequencing showed mixed bacterial DNA. Evaluation of 390 specimens after initiating standardized Millipore filtering of diluent fluid revealed a reduced number of positive Gram stains, yielding 9% sensitivity and 99% specificity. Clusters of false-positive Gram stains have been reported in other clinical conditions. They are apparently rare related to diagnosing periprosthetic infections but have severe consequences if used to guide treatment. Even occasional false-positive Gram stains should prompt review of laboratory methods. Our observations implicate dead bacteria in microbiologic reagents as potential sources of false-positive Gram stains.

Cleaning verification: A five parameter study of a Total Organic Carbon method development and validation for the cleaning assessment of residual detergents in manufacturing equipment.

PubMed

Li, Xue; Ahmad, Imad A Haidar; Tam, James; Wang, Yan; Dao, Gina; Blasko, Andrei

2018-02-05

A Total Organic Carbon (TOC) based analytical method to quantitate trace residues of clean-in-place (CIP) detergents CIP100 ® and CIP200 ® on the surfaces of pharmaceutical manufacturing equipment was developed and validated. Five factors affecting the development and validation of the method were identified: diluent composition, diluent volume, extraction method, location for TOC sample preparation, and oxidant flow rate. Key experimental parameters were optimized to minimize contamination and to improve the sensitivity, recovery, and reliability of the method. The optimized concentration of the phosphoric acid in the swabbing solution was 0.05M, and the optimal volume of the sample solution was 30mL. The swab extraction method was 1min sonication. The use of a clean room, as compared to an isolated lab environment, was not required for method validation. The method was demonstrated to be linear with a correlation coefficient (R) of 0.9999. The average recoveries from stainless steel surfaces at multiple spike levels were >90%. The repeatability and intermediate precision results were ≤5% across the 2.2-6.6ppm range (50-150% of the target maximum carry over, MACO, limit). The method was also shown to be sensitive with a detection limit (DL) of 38ppb and a quantitation limit (QL) of 114ppb. The method validation demonstrated that the developed method is suitable for its intended use. The methodology developed in this study is generally applicable to the cleaning verification of any organic detergents used for the cleaning of pharmaceutical manufacturing equipment made of electropolished stainless steel material. Copyright © 2017 Elsevier B.V. All rights reserved.

Rapid and sensitive sandwich enzyme-linked immunosorbent assay for detection of staphylococcal enterotoxin B in cheese.

PubMed Central

Morissette, C; Goulet, J; Lamoureux, G

1991-01-01

A rapid and sensitive screening sandwich enzyme-linked immunosorbent assay (ELISA) was developed for the detection of staphylococcal enterotoxin B (SEB) in cheese by using a highly avid anti-SEB antibody (Ab) as the capture Ab (CAb) and as the biotinylated Ab conjugate. The glutaraldehyde fixation method for the immobilization of CAb on polystyrene dipsticks was superior to the adsorption fixation and the adsorption-glutaraldehyde fixation methods. The glutaraldehyde fixation method resulted in a higher surface-saturating CAb concentration as evaluated by the peroxidase saturation technique and by the ability of the CAb-coated dipstick to discriminate between positive and negative controls (index of discrimination). Of nine blocking agents used alone or in pairs, lysine-human serum albumin, bovine serum albumin, human serum albumin, and gelatin effectively saturated available sites on the CAb-coated dipsticks without causing interference with the antigen-Ab reactions. The addition of 1% polyethylene glycol to the diluent of the biotinylated anti-SEB Ab conjugate improved the detection of SEB. A concentration of 4% polyethylene glycol allowed a 5-min reaction time for the streptavidin-biotin-horseradish peroxidase conjugate. Cheddar cheese homogenate reduced the sensitivity of the SEB assay; however, the sensitivity was restored when 1.6% (wt/vol) of either a nonionic detergent (Mega-9) or two zwitterionic detergents (Zwittergent 3-10 and 3-12 detergent) was added to the diluent. By using the rapid sandwich ELISA, a minimum of 0.5 to 1.0 ng of SEB per ml was detected within 45 min. The whole procedure for the analysis of the cheddar cheese samples was completed within 1 h.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2039234

Reduction Rates for Higher Americium Oxidation States in Nitric Acid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grimes, Travis Shane; Mincher, Bruce Jay; Schmitt, Nicholas C

The stability of hexavalent americium was measured using multiple americium concentrations and nitric acid concentrations after contact with the strong oxidant sodium bismuthate. Contrary to our hypotheses Am(VI) was not reduced faster at higher americium concentrations, and the reduction was only zero-order at short time scales. Attempts to model the reduction kinetics using zero order kinetic models showed Am(VI) reduction in nitric acid is more complex than the autoreduction processes reported by others in perchloric acid. The classical zero-order reduction of Am(VI) was found here only for short times on the order of a few hours. We did show thatmore » the rate of Am(V) production was less than the rate of Am(VI) reduction, indicating that some Am(VI) undergoes two electron-reduction to Am(IV). We also monitored the Am(VI) reduction in contact with the organic diluent dodecane. A direct comparison of these results with those in the absence of the organic diluent showed the reduction rates for Am(VI) were not statistically different for both systems. Additional americium oxidations conducted in the presence of Ce(IV)/Ce(III) ions showed that Am(VI) is reduced without the typical growth of Am(V) observed in the systems sans Ce ion. This was an interesting result which suggests a potential new reduction/oxidation pathway for Am in the presence of Ce; however, these results were very preliminary, and will require additional experiments to understand the mechanism by which this occurs. Overall, these studies have shown that hexavalent americium is fundamentally stable enough in nitric acid to run a separations process. However, the complicated nature of the reduction pathways based on the system components is far from being rigorously understood.« less

Flow rate of some pharmaceutical diluents through die-orifices relevant to mini-tableting.

PubMed

Kachrimanis, K; Petrides, M; Malamataris, S

2005-10-13

The effects of cylindrical orifice length and diameter on the flow rate of three commonly used pharmaceutical direct compression diluents (lactose, dibasic calcium phosphate dihydrate and pregelatinised starch) were investigated, besides the powder particle characteristics (particle size, aspect ratio, roundness and convexity) and the packing properties (true, bulk and tapped density). Flow rate was determined for three different sieve fractions through a series of miniature tableting dies of different orifice diameter (0.4, 0.3 and 0.2 cm) and thickness (1.5, 1.0 and 0.5 cm). It was found that flow rate decreased with the increase of the orifice length for the small diameter (0.2 cm) but for the large diameter (0.4 cm) was increased with the orifice length (die thickness). Flow rate changes with the orifice length are attributed to the flow regime (transitional arch formation) and possible alterations in the position of the free flowing zone caused by pressure gradients arising from the flow of self-entrained air, both above the entrance in the die orifice and across it. Modelling by the conventional Jones-Pilpel non-linear equation and by two machine learning algorithms (lazy learning, LL, and feed-forward back-propagation, FBP) was applied and predictive performance of the fitted models was compared. It was found that both FBP and LL algorithms have significantly higher predictive performance than the Jones-Pilpel non-linear equation, because they account both dimensions of the cylindrical die opening (diameter and length). The automatic relevance determination for FBP revealed that orifice length is the third most influential variable after the orifice diameter and particle size, followed by the bulk density, the difference between bulk and tapped densities and the particle convexity.

Effects of Phosphodiesterase 4 Inhibition on Alveolarization and Hyperoxia Toxicity in Newborn Rats

PubMed Central

Méhats, Céline; Franco-Montoya, Marie-Laure; Boucherat, Olivier; Lopez, Emmanuel; Schmitz, Thomas; Zana, Elodie; Evain-Brion, Danièle; Bourbon, Jacques; Delacourt, Christophe; Jarreau, Pierre-Henri

2008-01-01

Background Prolonged neonatal exposure to hyperoxia is associated with high mortality, leukocyte influx in airspaces, and impaired alveolarization. Inhibitors of type 4 phosphodiesterases are potent anti-inflammatory drugs now proposed for lung disorders. The current study was undertaken to determine the effects of the prototypal phosphodiesterase-4 inhibitor rolipram on alveolar development and on hyperoxia-induced lung injury. Methodology/Findings Rat pups were placed under hyperoxia (FiO2>95%) or room air from birth, and received rolipram or its diluent daily until sacrifice. Mortality rate, weight gain and parameters of lung morphometry were recorded on day 10. Differential cell count and cytokine levels in bronchoalveolar lavage and cytokine mRNA levels in whole lung were recorded on day 6. Rolipram diminished weight gain either under air or hyperoxia. Hyperoxia induced huge mortality rate reaching 70% at day 10, which was prevented by rolipram. Leukocyte influx in bronchoalveolar lavage under hyperoxia was significantly diminished by rolipram. Hyperoxia increased transcript and protein levels of IL-6, MCP1, and osteopontin; rolipram inhibited the increase of these proteins. Alveolarization was impaired by hyperoxia and was not restored by rolipram. Under room air, rolipram-treated pups had significant decrease of Radial Alveolar Count. Conclusions Although inhibition of phosphodiesterases 4 prevented mortality and lung inflammation induced by hyperoxia, it had no effect on alveolarization impairment, which might be accounted for by the aggressiveness of the model. The less complex structure of immature lungs of rolipram-treated pups as compared with diluent-treated pups under room air may be explained by the profound effect of PDE4 inhibition on weight gain that interfered with normal alveolarization. PMID:18941502

Cholestanol-loaded-cyclodextrin improves the quality of stallion spermatozoa after cryopreservation.

PubMed

Moraes, E A; Matos, W C G; Graham, J K; Ferrari, W D

2015-07-01

This study was to compare the effect of adding cholesterol or cholestanol loaded cyclodextrins in stallion sperm prior to cryopreservation to optimize sperm cryosurvival. Ejaculates from each of eight stallions were diluted to 120 million cells in a S-MEDIUM diluent. The diluted sperm were sub-divided into three treatments: no additive (control); 0.75mg of cyclodextrin pre-loaded with cholesterol (CLC)/120 million sperm (positive control); 1.5mg CLC/120 million sperm; 0.75mg of cyclodextrin pre-loaded with cholestanol (CnLC)/120 million sperm; and 1.5mg CnLC/120 million sperm. To set the experiments, the treated sperm were incubated for 15min at 22°C to allow for the incorporation of cholesterol or cholestanol. In each experiment, treated sperm incubated for 15min at 22°C to allow for incorporation of cholesterol or cholestanol. The samples were then diluted 1:5 (v/v) with Lactose-Egg Yolk diluent and cooled to 5°C over a 2h period. Loaded into 0.25ml polyvinylchloride straws, frozen in liquid nitrogen vapor for 10min, and then plunged into liquid nitrogen until further use. Higher percentages of motile sperm and viable cells were achieved after thawing for stallion sperm treated with CLC and CnLC compared to control (P<0.05). Addition of CnLC also resulted in more number sperm binding to chicken egg perivitelline membrane (CEPM) after cryopreservation than cholestanol and control sperm (P<0.05). In conclusion, CnLC and CLC improved the percentage of post-thaw motility of equine sperm and CnLC provided greater binding efficiency. Copyright © 2015 Elsevier B.V. All rights reserved.

Solution stability of Captisol-stabilized melphalan (Evomela) versus Propylene glycol-based melphalan hydrochloride injection.

PubMed

Singh, Ramsharan; Chen, Jin; Miller, Teresa; Bergren, Michael; Mallik, Rangan

2016-12-14

The objective of this study was to compare the stability of recently approved Captisol-stabilized propylene glycol-free melphalan injection (Evomela™) against currently marketed propylene glycol-based melphalan injection. The products were compared as reconstituted solutions in vials as well as admixture solutions prepared from normal saline in infusion bags. Evomela and propylene glycol-based melphalan injection were reconstituted in normal saline and organic custom diluent, respectively, according to their package insert instructions. The reconstituted solutions were diluted in normal saline to obtain drug admixture solutions at specific drug concentrations. Stability of the solutions was studied at room temperature by assay of melphalan and determination of melphalan-related impurities. Results show that based on the increase in total impurities in propylene glycol-based melphalan injection at 0.45 mg/mL, Evomela admixture solutions are about 5, 9, 15 and 29 times more stable at concentrations of 0.45, 1.0, 2.0 and 5.0 mg/mL, respectively. Results confirmed that reconstituted Evomela solution can be stored in the vial for up to 1 h at RT or for up to 24 h at refrigerated temperature (2-8 °C) with no significant degradation. After storage in the vial, it remains stable for an additional 3-29 h after preparation of admixture solution in infusion bags at concentrations of 0.25-5.0 mg/mL, respectively. In addition, Evomela solution in saline, at concentration of 5.0 mg/mL melphalan was bacteriostatic through 72 h storage at 2-8 °C. Formulation of melphalan with Captisol technology significantly improved stability compared to melphalan hydrochloride reconstituted with propylene-glycol based diluents.

Liquid-liquid extraction of neodymium(III) by dialkylphosphate ionic liquids from acidic medium: the importance of the ionic liquid cation.

PubMed

Rout, Alok; Kotlarska, Justyna; Dehaen, Wim; Binnemans, Koen

2013-10-21

The ionic liquids 1-hexyl-3-methylimidazolium bis(2-ethylhexyl)phosphate, [C6mim][DEHP], 1-hexyl-1-methylpyrrolidinium bis(2-ethylhexyl)phosphate, [C6mpyr][DEHP], and tetrabutylammonium bis(2-ethylhexyl)phosphate, [N4444][DEHP], were prepared and characterized using (1)H and (13)C NMR spectroscopy. The extraction behavior of neodymium(iii) from nitrate medium by these ionic liquids, diluted with the room temperature ionic liquids 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C6mim][NTf2], 1-hexyl-3-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [C6mpyr][NTf2], and tributylmethylammonium bis(trifluoromethylsulfonyl)imide, [N1444][NTf2], was studied. The distribution ratio of neodymium(iii) was measured as a function of various parameters, such as pH, concentration of the ionic liquid extractant, nature of diluents, concentration of ionic liquid cations and nitrate anions in the aqueous phase. The extraction behavior was compared with that obtained for a solution of the molecular extractant bis(2-ethylhexyl)phosphoric acid (DEHPA) in an ionic liquid diluent. The extraction of neodymium(iii) in the ionic liquids [C6mim][DEHP] and [C6mpyr][DEHP] showed markedly different extraction properties in comparison with that of the quaternary ammonium analogue [N4444][DEHP], especially concerning the pH dependence of the extraction process. These results show that the extraction process can be tuned by the selection of the ionic liquid cation. The extraction experiments also included the trivalent rare-earth ions lanthanum(iii), cerium(iii), praseodymium(iii), ytterbium(iii) and yttrium(iii). Studies of the stripping behavior and the reusability of the ionic liquids were carried out, which indicate that the ionic liquids can be reused with no loss in activity.

The AHA Moment: Assessment of the Redox Stability of Ionic Liquids Based on Aromatic Heterocyclic Anions (AHAs) for Nuclear Separations and Electric Energy Storage.

PubMed

Shkrob, Ilya A; Marin, Timothy W

2015-11-19

Because of their extended conjugated bond network, aromatic compounds generally have higher redox stability than less saturated compounds. We conjectured that ionic liquids (ILs) consisting of aromatic heterocyclic anions (AHAs) may exhibit improved radiation and electrochemical stability. Such properties are important in applications of these ILs as diluents in radionuclide separations and electrolytes in the electric energy storage devices. In this study, we systematically examine the redox chemistry of the AHAs. Three classes of these anions have been studied: (i) simple 5-atom ring AHAs, such as the pyrazolide and triazolides, (ii) AHAs containing an adjacent benzene ring, and (iii) AHAs containing electron-withdrawing groups that were introduced to reduce their basicity and interaction with metal ions. It is shown that fragmentation in the reduced and oxidized states of these AHAs does not generally occur, and the two main products, respectively, are the H atom adduct and the imidyl radical. The latter species occurs either as an N σ-radical or as an N π-radical, depending on the length of the N-N bond, and the state that is stabilized in the solid matrix is frequently different from that having the lowest energy in the gas phase. In some instances, the formation of the sandwich π-stack dimer radical anions has been observed. For trifluoromethylated anions, H adduct formation did not occur; instead, there was facile loss of fluoride from their fluorinated groups. The latter can be problematic in nuclear separations, but beneficial in batteries. Overall, our study suggests that AHA-based ILs are viable candidates for use as radiation-exposed diluents and electrolytes.

Prediction of heat release effects on a mixing layer

NASA Technical Reports Server (NTRS)

Farshchi, M.

1986-01-01

A fully second-order closure model for turbulent reacting flows is suggested based on Favre statistics. For diffusion flames the local thermodynamic state is related to single conserved scalar. The properties of pressure fluctuations are analyzed for turbulent flows with fluctuating density. Closure models for pressure correlations are discussed and modeled transport equations for Reynolds stresses, turbulent kinetic energy dissipation, density-velocity correlations, scalar moments and dissipation are presented and solved, together with the mean equations for momentum and mixture fraction. Solutions of these equations are compared with the experimental data for high heat release free mixing layers of fluorine and hydrogen in a nitrogen diluent.

Isolated Liquid Droplet Combustion: Inhibition and Extinction Studies

NASA Technical Reports Server (NTRS)

Dryer, F. L.; Kroenlein, K. G.; Kazakov, A.; Williams, F. A.; Nayagam, V.

2004-01-01

Introduction of fire suppressants to the ambient environment surrounding a heterogeneous diffusion flame may be an inefficient technique for fire safety in systems without buoyant flows. Carbon dioxide substitution for nitrogen diluent leads to significant modifications of the sphero-symmetric burning behavior of isolated n-heptane droplets, partly through increased heat capacity within the gaseous diffusion flame, but mostly because of modifications in spectral radiative coupling in the gas phase. Effects of longer time scale phenomena such as sooting and slow gas-phase/droplet convection remain to be determined. Similar methodologies can be applied to evaluate the effects and efficacy of chemical inhibitors in the liquid and gas phases.

Fire Safety in the Low-Gravity Spacecraft Environment

NASA Technical Reports Server (NTRS)

Friedman, Robert

1999-01-01

Research in microgravity (low-gravity) combustion promises innovations and improvements in fire prevention and response for human-crew spacecraft. Findings indicate that material flammability and fire spread in microgravity are significantly affected by atmospheric flow rate, oxygen concentration, and diluent composition. This information can lead to modifications and correlations to standard material-assessment tests for prediction of fire resistance in space. Research on smoke-particle changes in microgravity promises future improvements and increased sensitivity of smoke detectors in spacecraft. Research on fire suppression by extinguishing agents and venting can yield new information on effective control of the rare, but serious fire events in spacecraft.

Phenylethynyl terminated reactive oligomer

NASA Technical Reports Server (NTRS)

Bryant, Robert G. (Inventor); Jensen, Brian J. (Inventor); Hergenrother, Paul M. (Inventor)

1995-01-01

A composition of matter having the general structure: ##STR1## (wherein X is F, Cl, or NO.sub.2, and Y is CO, SO.sub.2 or C(CF.sub.3).sub.2) is employed to terminate a nucleophilic reagent, resulting in the exclusive production of phenylethynyl terminated reactive oligomers which display unique thermal characteristics. A reactive diluent having the general structure: ##STR2## (wherein R is any aliphatic or aromatic moiety) is employed to decrease the melt viscosity of a phenylethynyl terminated reactive oligomer and to subsequently react therewith to provide a thermosetting material of enhanced density. These materials have features which make them attractive candidates for use as composite matrices and adhesives.