Solid feeder and method

DOEpatents

Hathaway, Thomas J.

1979-01-01

This invention provides a housing containing a rotatable coal bucket that is sealed at its ends in the housing with a reciprocal plunger that is sealed in the bucket at one end and has an opposite cone-shaped end that wedges up against a closed end of the bucket, and a method for feeding dry, variable size coal from an ambient atmosphere at low pressure into a high temperature, high pressure reactor between the seals for producing fuel gas substantially without losing any high pressure gas from the reactor or excessively wearing the seals. To this end, the piston biases the plunger back and forth for loading and unloading the bucket with coal along an axis that is separated from the seals, the bucket is rotated to unload the coal into the reactor so as to fill the bucket with trapped high pressure gas from the reactor while preventing the gas from escaping therefrom, and then the cone-shaped plunger end is wedged into mating engagement with the closed end of the bucket to displace this high pressure bucket gas by expelling it back into the reactor whereby the bucket can be re-rotated for filling it with coal again substantially without losing any of the high pressure gas or excessively wearing the seals.

Extreme-Dipper Profile, Increased Aortic Stiffness, and Impaired Subendocardial Viability in Hypertension.

PubMed

Amah, Guy; Ouardani, Rahma; Pasteur-Rousseau, Adrien; Voicu, Sebastian; Safar, Michel E; Kubis, Nathalie; Bonnin, Philippe

2017-04-01

In treated hypertensives, extreme-dippers with stable coronary artery disease (CAD) exhibit more severe nighttime cardiac ischemia than dippers. After excluding confounding factors such as diabetes, CAD or chronic kidney disease (CKD), we assessed whether subendocardial viability, determined by the Buckberg index, was more significantly impaired in extreme-dippers than in dippers. Two hundred thirteen consecutive treated hypertensives (156 dippers, 57 extreme-dippers), were included. After 24-hour ambulatory blood pressure (BP) monitoring, patients underwent radial applanation tonometry (with determination of: subendocardial viability ratio [SEVR], central augmentation index [AIx], and pulse pressure amplification [PPamp]), carotid-femoral pulse wave velocity (cfPWV) measurement, and cycle ergometer stress testing. Extreme-dippers showed higher cfPWV (8.99 ± 2.16 vs. 8.29 ± 1.69 m/s, P = 0.014), higher AIx (29.7 ± 9.4 vs. 26.4 ± 10.4%, P = 0.042), lower PPamp (1.22 ± 0.14 vs. 1.30 ± 0.15, P < 0.001), lower SEVR (146 ± 23% vs. 157 ± 26%, P = 0.007), and lower nighttime diastolic BP (DBP) (70 ± 9 vs. 75 ± 9 mm Hg, P < 0.001) than dippers. SEVR and cfPWV were inversely correlated. Among extreme-dippers, women exhibited lower SEVR (138 ± 21% vs. 161 ± 23%, P = 0.004), PPamp (1.16 ± 0.10 vs. 1.31 ± 0.15, P < 0.001), and nighttime DBP (67 ± 8 mm Hg vs. 72 ± 8 mm Hg, P = 0.017) than men. Extreme-dipper treated hypertensives with no history of CAD, diabetes or CKD, present increased aortic stiffness and low PPamp. Furthermore, this is the first demonstration of the greater likelihood of these patients to exhibit impaired subendocardial viability compared to dippers. Extreme-dipper hypertensive patients, women in particular, may have a significantly higher risk of silent myocardial ischemia, thus justifying systematic screening. © American Journal of Hypertension, Ltd 2017. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Impact of empagliflozin on blood pressure in dipper and non-dipper patients with type 2 diabetes mellitus and hypertension.

PubMed

Chilton, Robert; Tikkanen, Ilkka; Hehnke, Uwe; Woerle, Hans J; Johansen, Odd Erik

2017-11-01

In the EMPA-REG BP trial, empagliflozin significantly reduced systolic and diastolic blood pressure (SBP and DBP) compared with placebo at week 12 in patients with type 2 diabetes mellitus (T2DM) and hypertension. In a post-hoc analysis, we assessed the effect of empagliflozin on SBP and DBP using 24-hour ambulatory BP monitoring in patients categorized as dippers (sleep-time mean SBP ≤ 90% of awake-time mean; n = 417) or non-dippers (sleep-time mean SBP > 90% of awake-time mean; n = 350). In dippers, adjusted mean (SE) changes from baseline in mean 24-hour SBP (mm Hg) at week 12 were -0.2 (0.7) with placebo vs -3.8 (0.6) and -3.9 (0.7) with empagliflozin 10 and 25 mg, respectively (both P  < .001 vs placebo). In non-dippers, these changes were 1.0 (0.7) with placebo vs -1.6 (0.7) with empagliflozin 10 mg ( P  = .013 vs placebo) and -3.8 (0.7) with empagliflozin 25 mg ( P  < .001 vs placebo). In both dippers and non-dippers, SBP and DBP patterns over 24 hours were maintained. There were no clinically relevant changes in heart rate with empagliflozin. In conclusion, empagliflozin significantly reduced mean 24-hour SBP compared with placebo in dippers and non-dippers. © 2017 John Wiley & Sons Ltd.

Reverse dipper and high night-time heart rate in acute stage of cerebral infarction are associated with increased mortality.

PubMed

Park, Jae-Hyeong; Lee, Hyun-Seok; Kim, Jun Hyung; Lee, Jae-Hwan; Kim, Jei; Choi, Si Wan

2014-01-01

Reverse dipper, blood pressure (BP) rises during night-time, is a risk factor of increased cardiovascular events in hypertensive patients. However, we have little information whether reverse dipper in acute stage of cerebral infarction (CI) affects on the recurrence and mortality. We studied to assess the relationship between reverse dipper and adverse clinical outcomes in the acute stage of CI. We screened and enrolled consecutive patients with acute CI with ambulatory blood pressure monitoring (ABPM) within 2 weeks after admission from August 2001 to July 2005. According to systolic blood pressure (SBP) dropping pattern during night-time compared with daytime, we classified into extreme dipper (≥20%), dipper (≥10%, <20%), nondipper (≥0%, <10%), and reverse dipper (BP rises during night-time). We analyzed 426 patients (72 ± 13 years old, 255 men) and checked recurrence of CI or all-cause mortality for further 7.6 ± 3.1 years for checking of recurrence or all-cause mortality. Of 426 patients, 202 patients were nondippers (47%), 134 were reverse dippers (32%), 80 were dippers (19%), and 10 were extreme dippers (2%). During the follow-up period, 89 patients (21%) had recurrence of CI. After multivariate analysis, daytime SBP (hazard ratio = 1.014, P = .018) was the significant predictor of recurrence. There were 141 deaths (33%) in our study cohort. Multivariate analysis showed that age (hazard ratio = 1.106, P < .001), nocturnal mean heart rate (hazard ratio = 1.023, P = .004), and reverse dipper (hazard ratio = 1. 676, P = .007) were statistically significant. Reverse dipper and high night-time heart rate in the acute stage of CI were associated with total mortality during long-term follow-up. These findings suggest the clinical utility of ABPM in acute stage of CI. Copyright © 2014 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Reverse dipper pattern of blood pressure at 3 months is associated with inflammation and outcome after renal transplantation.

PubMed

Ibernon, Meritxell; Moreso, Francesc; Sarrias, Xavier; Sarrias, Maria; Grinyó, Josep M; Fernandez-Real, José M; Ricart, Wifredo; Serón, Daniel

2012-05-01

Cardiovascular disease is the major cause of morbidity and mortality after renal transplantation. It has been shown that both traditional and transplant-specific risk factors contribute to the high cardiovascular burden after renal transplantation The aim is to evaluate the association among ambulatory blood pressure monitoring (ABPM) at 3 months, inflammation and graft outcome. ABPM at 3 months was performed in 126 consecutive renal transplants. According to the nocturnal reduction of systolic blood pressure (SBP), dipper (ΔSBP ≥ 10%), non-dipper (0 < ΔSBP < 10%) and reverse dipper (SBP nocturnal rise) pattern were defined. The outcome variable was the combination of any cardiovascular event and graft failure for any reason. Circadian blood pressure pattern was dipper (n = 22), non-dipper (n = 65) and reverse dipper (n = 39). Reverse dipper pattern was associated with pre-transplant diabetes (18 versus 2%, P = 0.004), body mass index (26.9 ± 5.0 versus 24.8 ± 3.8 kg/m(2), P = 0.001), calcineurin inhibitor treatment (74 versus 54%, P = 0.001) and serum soluble tumour necrosis factor receptor 2 levels (18 ± 15 versus 11 ± 6 ng/mL, P = 0.010). During 45 ± 11 months of follow-up, 22 patients reached the combined outcome variable. Multivariate Cox regression analysis showed that reverse dipper pattern [relative risk (RR): 3.50 and 95% confidence interval (CI): 1.36-8.93; P = 0.009] and creatinine clearance (RR: 0.94 and 95% CI: 0.91-0.98, P = 0.003) were independently associated with outcome. The reverse dipper circadian pattern is associated with inflammation and constitutes an independent predictor of graft outcome.

The assessment of tobacco dependence in young users of smokeless tobacco.

PubMed

DiFranza, Joseph R; Sweet, Michael; Savageau, Judith A; Ursprung, W W Sanouri

2012-09-01

As all published measures of dependence for users of smokeless tobacco (dippers) have poor reliability, in the present work the Hooked on Nicotine Checklist (HONC) and the Autonomy Over Smoking Scale (AUTOS) were evaluated for use with this population. Dippers and smokers were also compared in relation to dependence, the pleasure derived from using tobacco and the latency to the onset of withdrawal. In 2010, an anonymous self-completed paper survey was administered to 1541 students of mixed race and ethnicity in grades 9-12 (mean age 15.9 years) in a Florida high school where students used cigarettes and smokeless tobacco. The reliability (Cronbach's α) for the HONC was 0.90 for smokers (n = 139) and 0.91 for dippers (n = 85), and for the AUTOS was 0.94 for smokers and dippers. Dippers and smokers did not differ significantly in relation to scores on the HONC, AUTOS, latency to withdrawal onset or pleasure derived from smoking. One or more symptoms on the HONC were reported by 56% of dippers and 57% of smokers with <100 lifetime uses of their favoured tobacco product, and by 91% of dippers and 91% of smokers with ≥ 100 lifetime uses (not significant). Greater lifetime use was associated with a significantly shorter latency to withdrawal for smokers and dippers. The HONC and AUTOS are highly reliable measures of dependence for adolescent users of cigarettes and smokeless tobacco. Using these measures and other indicators, no meaningful differences in dependence were found between dippers and smokers at comparable levels of lifetime use.

Discovery of new dipper stars with K2: a window into the inner disc region of T Tauri stars

NASA Astrophysics Data System (ADS)

Hedges, Christina; Hodgkin, Simon; Kennedy, Grant

2018-05-01

In recent years, a new class of young stellar object (YSO) has been defined, referred to as dippers, where large transient drops in flux are observed. These dips are too large to be attributed to stellar variability, last from hours to days and can reduce the flux of a star by 10-50 per cent. This variability has been attributed to occultations by warps or accretion columns near the inner edge of circumstellar discs. Here, we present 95 dippers in the Upper Scorpius association and ρ Ophiuchus cloud complex found in K2 Campaign 2 data using supervised machine learning with a random forest classifier. We also present 30 YSOs that exhibit brightening events on the order of days, known as bursters. Not all dippers and bursters are known members, but all exhibit infrared excesses and are consistent with belonging to either of the two young star-forming regions. We find 21.0 ± 5.5 per cent of stars with discs are dippers for both regions combined. Our entire dipper sample consists only of late-type (KM) stars, but we show that biases limit dipper discovery for earlier spectral types. Using the dipper properties as a proxy, we find that the temperature at the inner disc edge is consistent with interferometric results for similar and earlier type stars.

The relationship of age-adjusted Charlson comorbidity ındex and diurnal variation of blood pressure.

PubMed

Kalaycı, Belma; Erten, Yunus Turgay; Akgün, Tunahan; Karabag, Turgut; Kokturk, Furuzan

2018-03-05

Charlson Comorbidity index (CCI) is a scoring system to predict prognosis and mortality. It exhibits better utility when combined with age, age-adjusted Charlson Comorbidity Index (ACCI). The aim of this study was to evaluate the relationship between ACCI and diurnal variation of blood pressure parameters in hypertensive patients and normotensive patients. We enrolled 236 patients. All patients underwent a 24-h ambulatory blood pressure monitoring (ABPM) for evaluation of dipper or non-dipper pattern. We searched the correlation between ACCI and dipper or non-dipper pattern and other ABPM parameters. To further investigate the role of these parameters in predicting survival, a multivariate analysis using the Cox proportional hazard model was performed. 167 patients were in the hypertensive group (87 patients in non-dipper status) and 69 patients were in the normotensive group (41 patients in non-dipper status) of all study patients. We found a significant difference and negative correlation between AACI and 24-h diastolic blood pressure (DBP), awake DBP, awake mean blood pressure (MBP) and 24-h MBP and awake systolic blood pressure(SBP). Night decrease ratio of blood pressure had also a negative correlation with ACCI (p = 0.003, r = -0.233). However, we found a relationship with non-dipper pattern and ACCI in the hypertensive patients (p = 0.050). In multivariate Cox analysis sleep MBP was found related to mortality like ACCI (p = 0.023, HR = 1.086, %95 CI 1.012-1.165) Conclusion: ACCI was statistically significantly higher in non-dipper hypertensive patients than dipper hypertensive patients while ACCI had a negative correlation with blood pressure. Sleep MBP may predict mortality.

Paraoxonase and Arylesterase Activities in Dipper and Non-Dipper Prehypertensive Subjects

PubMed Central

Yuksel, Murat; Yildiz, Abdulkadir; Tekbas, Ebru; Gunduz, Ercan; Ekinci, Aysun; Bilik, Mehmet Zihni; Ozaydogdu, Necdet; Atilgan, Zuhal

2015-01-01

Abstract Paraoxonase-1, a high-density lipoprotein linked enzyme complex, was shown to be decreased in several cardiovascular diseases. We aimed to explore whether serum paraoxonase and arylesterase activities differ in dipper and non-dipper prehypertensive subjects compared to healthy controls. Sixty prehypertensive subjects and 30 controls were enrolled. All subjects underwent echocardiographic assessment and 24-hour ambulatory blood pressure monitoring (ABPM). According to the blood pressure (BP) course on ABPM, prehypertensive subjects were categorized into two: non-dipper prehypertensive (NDPH) and dipper prehypertensive (DPH) groups. Serum paraoxonase and arylesterase activities were detected spectrophotometrically. Paraoxonase and arylesterase activities were significantly lower in patients with NDPH compared to both DPH and control groups. Both paraoxonase and arylesterase activities showed significant negative correlations with BP and left ventricular mass index. We have demonstrated that NDPH subjects have lower paraoxonase and arylesterase activities compared to DPH subjects and normotensives. Further prospective studies are needed to clarify the role of paraoxonase and arylesterase activities in the development of overt hypertension in prehypertensive subjects. PMID:25929926

Paraoxonase and arylesterase activities in dipper and non-dipper prehypertensive subjects.

PubMed

Yuksel, Murat; Yildiz, Abdulkadir; Tekbas, Ebru; Gunduz, Ercan; Ekinci, Aysun; Bilik, Mehmet Zihni; Ozaydogdu, Necdet; Atilgan, Zuhal

2015-05-01

Paraoxonase-1, a high-density lipoprotein linked enzyme complex, was shown to be decreased in several cardiovascular diseases. We aimed to explore whether serum paraoxonase and arylesterase activities differ in dipper and non-dipper prehypertensive subjects compared to healthy controls.Sixty prehypertensive subjects and 30 controls were enrolled. All subjects underwent echocardiographic assessment and 24-hour ambulatory blood pressure monitoring (ABPM). According to the blood pressure (BP) course on ABPM, prehypertensive subjects were categorized into two: non-dipper prehypertensive (NDPH) and dipper prehypertensive (DPH) groups. Serum paraoxonase and arylesterase activities were detected spectrophotometrically.Paraoxonase and arylesterase activities were significantly lower in patients with NDPH compared to both DPH and control groups. Both paraoxonase and arylesterase activities showed significant negative correlations with BP and left ventricular mass index.We have demonstrated that NDPH subjects have lower paraoxonase and arylesterase activities compared to DPH subjects and normotensives. Further prospective studies are needed to clarify the role of paraoxonase and arylesterase activities in the development of overt hypertension in prehypertensive subjects.

Relationship between blood pressure and retrobulbar blood flow in dipper and nondipper primary open-angle glaucoma patients.

PubMed

Marjanović, Ivan; Marjanović, Marija; Martinez, Antonio; Marković, Vujica; Božić, Marija; Stojanov, Vesna

2016-11-04

To evaluate the relationship between retrobulbar hemodynamic parameters in the ophthalmic artery (OA), central retinal artery, and short posterior ciliary artery and 24-hour blood pressure (BP) measurements in dipper and nondipper patients with primary open-angle glaucoma (POAG). A prospective, cross-sectional, and observational study was conducted on consecutive patients, referred or recruited, attending the outpatient service of our ophthalmology department. Ambulatory BP monitoring, Doppler imaging, and ocular pulse amplitude measurements were performed on the same day. Patients with nocturnal BP decrease up to 10% of the diurnal BP were defined as dippers and those with BP decrease less than 10% were defined as nondippers. A total of 114 patients (36 nondippers and 78 dippers) were included in the study. The end-diastolic velocity was significantly lower and the resistivity index (RI) was significantly higher in the dippers than in the nondippers (p<0.0001 and p<0.0001, respectively). The RI in the OA was significantly correlated with daytime and nighttime systolic BP and with the daytime mean arterial pressure in the dippers. The RI in the OA significantly correlates with BP in patients with POAG with nocturnal BP dips. Additionally, retrobulbar blood flow parameters are reduced in dippers as compared with nondippers with POAG.

Evaluation of atrial electromechanical functions in dipper and nondipper hypertension patients using left atrial strain P-wave dispersion and P terminal force.

PubMed

Tosun, Veysel; Korucuk, Necmettin; Kılınç, Ali Yaşar; Uygun, Turgut; Altekin, Refik Emre; Güntekin, Ünal; Ermiş, Cengiz

2018-06-04

Nondippers are known to carry a high risk of cardiovascular morbidity and mortality. The aim of this study was to investigate the effects of dipper and nondipper status of hypertension on left atrial (LA) systolic and diastolic functions using two-dimensional speckle tracking echocardiography (2D-STE), P-wave dispersion (PWD), and P terminal force (PTF) in hypertensive patients. A total of 72 patients and 39 healthy individuals were included in the study. The patients were classified as nondippers if their daytime ambulatory systolic and diastolic blood pressure did not decrease by at least 10% during the night. Atrial electromechanical delay times, LA strain values were obtained by 2D-STE with automated software and compared between the groups. PWD and PTF data were calculated on the electrocardiography. Inter-atrial (dippers: 25.5 ± 3.9, nondippers: 32.2 ± 7.4, P < .001), left-atrial (dippers: 14.9 ± 3.7, nondippers: 18.2 ± 6.0, P = .016), and right atrial (dippers: 10.5 ± 2.1, nondippers: 14.2 ± 5.2, P < .001) electromechanical delay times were significantly longer in nondippers. LA strain S (dippers: 34.2 [29.7-38.7], nondippers: 27.7 [22.7-32.2], P < .001), LA strain E (dippers: 18.2 [16.6-20.1], nondippers: 14.4 [11.6-16.8], P < .001), and LA strain A (dippers: 15.8 [13.5-17.9], nondippers: 12.7 [9.9-14.5], P < .001) were significantly lower in nondippers. Nondippers also had an increased values of maximum P-wave duration (dippers: 0.117 [0.10-0.12], nondippers: 0.126 [0.12-0.14], P < .001), PWD (dippers: 0.062 [0.06-0.07], nondippers: 0.069 [0.06-0.08], P = .004), and PTF (dippers: 0.055 ± 0.02, nondippers: 0.066 ± 0.02, P = .02). Nondipping pattern in hypertensive patients had a worse cardiac remodeling, and impaired mechanical LA function compared with dipping pattern. The PWD and PTF findings support these changes. © 2018 Wiley Periodicals, Inc.

Evaluation of a Recirculating Dipper Well Combined with Ozone Sanitizer for Control of Foodborne Pathogens in Food Service Operations.

PubMed

Almeida, Giselle; Gibson, Kristen E

2016-09-01

In the retail food service industry, small countertop sinks, or dipper wells, are utilized to rinse and store serving utensils between uses. These dipper wells are designed to operate under a constant flow of water, which serves both to prevent the accumulation of microorganisms and to aid in the cleanliness of the dipper well itself. Here, a recirculating dipper well ozone sanitation system (DWOSS) was evaluated for the control and inactivation of Escherichia coli , Listeria innocua , PRD1 bacteriophage, and Staphylococcus aureus present on a stainless steel disher. In a low ozone (O 3 ) demand medium, the DWOSS achieved over a 5-log reduction for E. coli , L. innocua , and PRD1 at 30 s when exposed to 0.45 to 0.55 ppm of residual O 3 . A greater than 5-log total CFU reduction was achieved for S. aureus at a 600-s exposure time and 0.50 ppm of residual O 3 . When evaluated in the presence of high O 3 demand medium (10% skim milk), the DWOSS performed significantly better (P < 0.05) for all microbe-exposure time combinations compared with a conventional dipper well with respect to the reduction of microbes on the stainless steel disher. For example, at 30 s, the DWOSS achieved 4.37, 2.48, 1.38, and 1.31 greater log (CFU or PFU) reduction of E. coli , L. innocua , PRD1, and S. aureus , respectively, than a conventional dipper well. In addition, the DWOSS was evaluated under two neglect scenarios to determine its ability to control microbes in 10% skim milk medium on the stainless steel disher and within the dipper well basin itself over an extended period of use (2 h of use per day over 5 days). Considering the efficacy of the DWOSS unit against the microbes evaluated here, the integration of ozone into a dipper well could be a potential critical control point to reduce the incidence of microbial contamination during retail food service. To our knowledge, a dipper well with a cleaning-in-place sanitizing system is not currently available for use in the food service industry; and, thus, this is the first study to evaluate the efficacy of a cleaning-in-place dipper well.

BOREAS HYD-9 Tipping Bucket Rain Gauge Data

NASA Technical Reports Server (NTRS)

Kouwen, Nick; Hall, Forrest G. (Editor); Knapp, David E. (Editor); Soulis, Ric; Jenkinson, Wayne; Graham, Allyson; Neff, Todd; Smith, David E. (Technical Monitor)

2000-01-01

The BOREAS HYD-9 team collected several data sets containing precipitation and strearnflow measurements over the BOREAS study areas. This data set contains the measurements from the tipping bucket rain gauges at the BOREAS NSA and SSA. These measurements were submitted in 15-minute and 1-hour intervals. Only the 15-minute interval data set was loaded into the data base tables. Data were collected from the tipping bucket gauges from mid-April until mid-October in 1994, 1995, and 1996. The data are available in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884) or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Bucket wheel rehabilitation of ERC 1400-30/7 high-capacity excavators from lignite quarries

NASA Astrophysics Data System (ADS)

Vîlceanu, Fl; Iancu, C.

2016-11-01

The existence of bucket wheel equipment type ERC 1400-30/7 in lignite quarries with lifetime expired, or in the ultimate life period, together with high cost investments for their replacement, makes rational the efforts made to rehabilitation in order to extend their life. Rehabilitation involves checking operational safety based on relevant expertise of metal structures supporting effective resistance but also the replacement (or modernization) of subassemblies that can increase excavation process productivity, lowering energy consumption, reducing mechanical stresses. This paper proposes an analysis of constructive solution of using a part of the classical bucket wheel, on which are located 9 cutting cups and 9 chargers cups and adding a new part so that the new redesigned bucket-wheel will contain 18 cutting-chargers cups, compared to the classical model. On the CAD model of bucket wheel was performed a static and a dynamic FEA, the results being compared with the yield strength of the material of the entire structure, were checked mechanical stresses in the overall distribution map, and were verified the first 4 vibrating modes the structure compared to real loads. Thus was verified that the redesigned bucket-wheel can accomplish the proposed goals respectively increase excavation process productivity, lowering energy consumption and reducing mechanical stresses.

Evaluation of Tp-e interval and Tp-e/QT ratio in patients with non-dipper hypertension.

PubMed

Demir, Mehmet; Uyan, Umut

2014-01-01

Non-dipper hypertension is associated with increased cardiovascular morbidity and mortality. Several studies have suggested that the interval from the peak to the end of the electrocardiographic T wave (Tp-e) may correspond to the transmural dispersion of repolarization and that increased Tp-e interval and Tp-e/QT ratio are associated with malignant ventricular arrhythmias. The aim of this study was to evaluate ventricular repolarization by using Tp-e interval and Tp-e/QT ratio in patients with non-dipper hypertension. This study included 80 hypertensive patients. Hypertensive patients were divided into two groups: 50 dipper patients (29 male, mean age 51.5 ± 8 years) and 30 non-dipper patients (17 male, mean age 50.6 ± 5.4 years). Tp-e interval and Tp-e/QT ratio were measured from the 12-lead electrocardiogram. These parameters were compared between groups. No statistically significant difference was found between two groups in terms of basic characteristics. In electrocardiographic parameters analysis, QT dispersion (QTd) and corrected QTd were significantly increased in non-dipper patients compared to the dippers (39.4 ± 11.5 versus 27.3 ± 7.5 ms and 37.5 ± 9.5 versus 29.2 ± 6.5 ms, p = 0.001 and p = 0.01, respectively). Tp-e interval and Tp-e/QT ratio were also significantly higher in non-dipper patients (97.5 ± 11.2 versus 84.2 ± 8.3 ms and 0.23 ± 0.02 versus 0.17 ± 0.02, all p value <0.001). Our study revealed that QTd, Tp-e interval and Tp-e/QT ratio are prolonged in patients with non-dipper hypertension.

High-mountain lakes provide a seasonal niche for migrant American dippers

Treesearch

J. M. Garwood; K. L. Pope; R. M. Bourque; M. D. Larson

2009-01-01

We studied summer use of high elevation lakes by American Dippers (Cinclus mexicanus) in the Trinity Alps Wilderness, California by conducting repeated point-count surveys at 16 study lakes coupled with a 5-year detailed survey of all available aquatic habitats in a single basin. We observed American Dippers during 36% of the point-count surveys...

Assessing mercury exposure and effects to American dippers in headwater streams near mining sites.

PubMed

Henny, Charles J; Kaiser, James L; Packard, Heidi A; Grove, Robert A; Taft, Michael R

2005-10-01

To evaluate mercury (Hg) exposure and possible adverse effects of Hg on American dipper (Cinclus mexicanus) reproduction, we collected eggs and nestling feathers and the larval/nymph form of three Orders of aquatic macroinvertebrates (Ephemeroptera, Plecoptera and Trichoptera = EPT) important in their diet from three major headwater tributaries of the upper Willamette River, Oregon in 2002. The Coast Fork Willamette River is contaminated with Hg due to historical cinnabar (HgS) mining at the Black Butte Mine; the Row River is affected by past gold-mining operations located within the Bohemia Mining District, where Hg was used in the amalgamation process to recover gold; and the Middle Fork Willamette River is the reference area with no known mining. Methyl mercury (MeHg) concentrations (geometric mean) in composite EPT larvae (111.9 ng/g dry weight [dw] or 19.8 ng/g wet weight [ww]), dipper eggs (38.5 ng/g ww) and nestling feathers (1158 ng/g ww) collected from the Coast Fork Willamette were significantly higher than MeHg concentrations in EPT and dipper samples from other streams. Total mercury (THg) concentrations in surface sediments along the same Hg-impacted streams were investigated by others in 1999 (Row River tributaries) and 2002 (Coast Fork). The reported sediment THg concentrations paralleled our biological findings. Dipper breeding territories at higher elevations had fewer second clutches; however, dipper reproductive success along all streams (including the lower elevation and most Hg-contaminated Coast Fork), was judged excellent compared to other studies reviewed. Furthermore, MeHg concentrations in EPT samples from this study were well below dietary concentrations in other aquatic bird species, such as loons and ducks, reported to cause Hg-related reproductive problems. Our data suggest that either dipper feathers or EPT composites used to project MeHg concentrations in dipper feathers (with biomagnification factor of 10-20x) may be used, but with caution, to screen headwater streams for potential Hg-related effects on dippers. When actual feather concentrations or projected feather concentrations are equal to or lower than concentrations reported for the Coast Fork, dippers are expected to reproduce well (assuming adequate prey and suitable nest sites). When Hg concentrations are substantially higher, more detailed investigations may be required. Birds feeding almost exclusively on fish (e.g., osprey [Pandion haliaetus]) and usually found further downstream from the headwaters would not be adequately represented by dippers given the higher MeHg concentrations in fish resulting from biomagnification, compared to lower trophic level invertebrates.

Assessing mercury exposure and effects to American dippers in headwater streams near mining sites

USGS Publications Warehouse

Henny, Charles J.; Kaiser, James L.; Packard, Heidi A.; Grove, Robert A.; Taft, Mike R.

2005-01-01

To evaluate mercury (Hg) exposure and possible adverse effects of Hg on American dipper (Cinclus mexicanus) reproduction, we collected eggs and nestling feathers and the larval/nymph form of three Orders of aquatic macroinvertebrates (Ephemeroptera, Plecoptera and Trichoptera = EPT) important in their diet from three major headwater tributaries of the upper Willamette River, Oregon in 2002. The Coast Fork Willamette River is contaminated with Hg due to historical cinnabar (HgS) mining at the Black Butte Mine; the Row River is affected by past gold-mining operations located within the Bohemia Mining District, where Hg was used in the amalgamation process to recover gold; and the Middle Fork Willamette River is the reference area with no known mining. Methyl mercury (MeHg) concentrations (geometric mean) in composite EPT larvae (111.9 ng/g dry weight [dw] or 19.8 ng/g wet weight [ww]), dipper eggs (38.5 ng/g ww) and nestling feathers (1158 ng/g ww) collected from the Coast Fork Willamette were significantly higher than MeHg concentrations in EPT and dipper samples from other streams. Total mercury (THg) concentrations in surface sediments along the same Hg-impacted streams were investigated by others in 1999 (Row River tributaries) and 2002 (Coast Fork). The reported sediment THg concentrations paralleled our biological findings. Dipper breeding territories at higher elevations had fewer second clutches; however, dipper reproductive success along all streams (including the lower elevation and most Hg-contaminated Coast Fork), was judged excellent compared to other studies reviewed. Furthermore, MeHg concentrations in EPT samples from this study were well below dietary concentrations in other aquatic bird species, such as loons and ducks, reported to cause Hg-related reproductive problems. Our data suggest that either dipper feathers or EPT composites used to project MeHg concentrations in dipper feathers (with biomagnification factor of 10a??20??) may be used, but with caution, to screen headwater streams for potential Hg-related effects on dippers. When actual feather concentrations or projected feather concentrations are equal to or lower than concentrations reported for the Coast Fork, dippers are expected to reproduce well (assuming adequate prey and suitable nest sites). When Hg concentrations are substantially higher, more detailed investigations may be required. Birds feeding almost exclusively on fish (e.g., osprey [Pandion haliaetus]) and usually found further downstream from the headwaters would not be adequately represented by dippers given the higher MeHg concentrations in fish resulting from biomagnification, compared to lower trophic level invertebrates.

The impact of non-dipper circadian rhythm of blood pressure on left ventricular hypertrophy in patients with non-dialysis chronic kidney disease.

PubMed

Che, Xiajing; Mou, Shan; Zhang, Weiming; Zhang, Minfang; Gu, Leyi; Yan, Yucheng; Ying, Hua; Hu, Chunhua; Qian, Jiaqi; Ni, Zhaohui

2017-04-01

Objective The aim of this study was to investigate the correlation between non-dipper circadian rhythm of blood pressure (BP) and left ventricular hypertrophy (LVH) in patients with chronic kidney disease (CKD). Methods and results All 257 patients with stage 1 to 5 CKD were enrolled in the study and classified into a CKD1-3 group and a CKD4-5 group according to renal function. The parameters and circadian rhythm of BP were measured by a GE Marquette Tonoport V Eng dynamic sphygmomanometer, and cardiac structure was examined by echocardiography. The incidence of abnormal circadian BP rhythm (non-dipper rhythm) was quite high (75.4% in all enrolled patients and 71.3% in the patients with normal BP levels) in CKD patients and increased with the deterioration of renal function. Changes of cardiac structure such as LVH in patients with non-dipper BP were more distinct than in patients with dipper BP. The development of left ventricular mass index (LVMI) correlated positively with the incidence of non-dipper BP rhythm. Multiple regression analysis showed that 24-h systolic BP (β = 0.417, P < 0.01), triglycerides (TG) (β = -0.132, P = 0.007), Hb (β = -0.394, P = 0.016) and gender (β = 0.158, P = 0.039) were independent risk factors of LVMI. Conclusions The incidence of non-dipper circadian rhythm of blood pressure was quite high in CKD patients and increased with the deterioration of renal function. Non-dipper circadian rhythm of BP is closely related with LVMI.

Debris trap in a turbine cooling system

DOEpatents

Wilson, Ian David

2002-01-01

In a turbine having a rotor and a plurality of stages, each stage comprising a row of buckets mounted on the rotor for rotation therewith; and wherein the buckets of at least one of the stages are cooled by steam, the improvement comprising at least one axially extending cooling steam supply conduit communicating with an at least partially annular steam supply manifold; one or more axially extending cooling steam feed tubes connected to the manifold at a location radially outwardly of the cooling steam supply conduit, the feed tubes arranged to supply cooling steam to the buckets of at least one of the plurality of stages; the manifold extending radially beyond the feed tubes to thereby create a debris trap region for collecting debris under centrifugal loading caused by rotation of the rotor.

SEAS (Surveillance Environmental Acoustic Support Program) Support

DTIC Science & Technology

1984-02-29

ASEPS software - Provide support for AMES - Support for OUTPOST CREOLE, BIG DIPPER and MFA , First, a summary of the tasks as delineated in the contract...addition, the contractor will provide an engineer/scientist to support the BIG DIPPER data processing activities at NOSC. Task 3: SEAS Inventory - The...SI to provide support to SEAS for the OUTPOST -’ CREOLE III exercise which followed immediately after the BIG DIPPER .. exercise. OUTPOST CREOLE III

Increased low-grade inflammation and plasminogen-activator inhibitor-1 level in non-dippers with sleep apnea syndrome

PubMed Central

Ishikawa, Joji; Hoshide, Satoshi; Eguchi, Kazuo; Ishikawa, Shizukiyo; Pickering, Thomas G; Shimada, Kazuyuki; Kario, Kazuomi

2010-01-01

Objective Patients with sleep apnea syndrome (SAS) have an increased risk of cardiovascular events and frequently show a non-dipper pattern (blunted nocturnal decline <10%) of systolic blood pressure (BP). We investigated neurohumoral activation and risk factors in relation to nocturnal BP dipping pattern and SAS. Methods We conducted sleep polysomnography and ambulatory BP monitoring, and measured high-sensitivity C-reactive protein (hsCRP), tissue-type plasminogen activator inhibitor-1 (PAI-1), and neurohumoral factors in 121 outpatients with suspected SAS, who were classified in 4 groups depending on the presence or absence of dipping/non-dipping and SAS. Results Non-dippers with SAS had higher hsCRP (overall P<0.001), PAI-1 (overall P=0.004), and aldosterone levels (overall P=0.010) than any of the other 3 groups. After adjustment for significant covariates such as age, sex, body mass index, waist circumference, smoking, alcohol drinking, aspirin use, presence of DM, and insulin, non-dippers with SAS still had a higher hsCRP level than non-dippers without SAS (geometric mean: 1.47 vs. 0.37 mg/L, P=0.001). In multiple linear regression analysis controlling for confounding factors that related with SAS, hsCRP was significantly correlated with 3% oxygen desaturation index (P=0.047). PAI-1 was also highest in the non-dippers with SAS, but this was not independent of obesity. PAI-1 was correlated with insulin (r=0.32, P=0.002) and hsCRP levels (r=0.26, P=0.005). Conclusion Non-dipper status was associated with an increased hsCRP in patients who also had SAS, but not in those who did not, and hsCRP was closely affected by the desaturation level. PAI-1 is also increased in non-dippers with SAS, and is related to insulin and hsCRP. PMID:18475156

Hypertensive response to exercise in dipper and non-dipper normotensive diabetics.

PubMed

Kucukdurmaz, Zekeriya; Karavelioglu, Yusuf; Karapinar, Hekim; Gul, Ibrahim; Yilmaz, Ahmet; Yarlioglues, Mikail; Akpek, Mahmut; Kaya, Mehmet Gungor

2014-01-01

Non-dipper blood pressure (NDP) as an indicator of autonomic dysfunction could be associated with hypertensive response to exercise (HRE) in diabetic patients. HRE was determined as a predictor of development of unborn hypertension. We aimed to investigate if any correlation among NDP and HRE in normotensive type 2 diabetic patients. A total of 59 consecutive type 2 diabetic patients without history of hypertension and with normal blood pressure (BP) on ambulatory blood pressure monitoring (ABPM) were enrolled to the study. We divided the study population in to two groups depending on their BP on ABPM as dipper (group 1) or non-dipper (group 2). There were 22 patients (mean age 49.5 ± 7 and 10 male) in group 1 and 37 patients (mean age 53.1 ± 10 and 14 male) in group 2. Daytime diastolic and mean BP of dippers and night time systolic and mean BP of non-dippers were significantly higher. HRE was not significantly different between groups (59% vs. 62%, p = 0.820). Hemodynamic parameters during the exercise test were similar. At multivariate linear regression analysis, resting office systolic blood pressure (SBP) (r = 0.611, p < 0.001), male sex (r = 0.266, p = 0.002) and age (r = 0.321, p = 0.010) were independently correlated with peak exercises SBP. Logistic regression analyses identified the resting office SBP (OR 1.191, 95% CI 1.080-1.313; p < 0.001) and age (OR 1.161, 95% CI 1.038-1.298; p = 0.012) were independent predictors of HRE. This study revealed that HRE is not related with non-dipper BP in diabetic patients. This study could inspire to further studies to explore the main reasons of HRE in diabetes mellitus.

Determination of Critical Rock Mass in a Bucket of a Dinting Loader

NASA Astrophysics Data System (ADS)

Remiorz, Eryk

2017-09-01

The extraction of hard coal deposits lying in increasing depth causes significant problems with maintenance of roadways (maingates, tailgates, etc.). The reduction of the cross section of such excavations, caused by the floor upheaval, leads to the occurrence of many problems with transport and ventilation. Dinting loaders are employed to restore the original size of roadways tightened due to the activity of adverse stresses occurring in the rock mass. These are tracked machines, usually with small width of about 1 m. They often work in roadways with high longitudinal and lateral inclination, as a result of which they are especially susceptible to overturning. The article presents a mathematical model allowing to determine the critical mass of broken rock in a bucket. The model also allows to determine spatial coordinates of a dinting loader's centre of gravity depending on temporary position of movable elements of the loader such as a turntable, boom, coupler and bucket, and depending on the level of loading the bucket with broken rock. It also enables to determine critical angles of the roadways' longitudinal and lateral inclination. The outcomes of computer studies of variations in the position of the loader's centre of gravity depending on deflection angles of moving elements of the loader and the mass of broken rock in the bucket are also presented. Variability ranges of spatial coordinates of the centre of gravity of the loader are also established and examples are given for values of the critical mass of broken rock in the bucket.

Lumbopelvic muscle activation patterns in three stances under graded loading conditions: Proposing a tensegrity model for load transfer through the sacroiliac joints.

PubMed

Pardehshenas, Hamed; Maroufi, Nader; Sanjari, Mohammad Ali; Parnianpour, Mohamad; Levin, Stephen M

2014-10-01

According to the conventional arch model of the pelvis, stability of the sacroiliac joints may require a predominance of form and force closure mechanisms: the greater the vertical shear force at the sacroiliac joints, the greater the reliance on self-bracing by horizontally or obliquely oriented muscles (such as the internal oblique). But what happens to the arch model when a person stands on one leg? In such cases, the pelvis no longer has imposts, leaving both the arch, and the arch model theory, without support. Do lumbopelvic muscle activation patterns in one-legged stances under load suggest compatibility with a different model? This study compares lumbopelvic muscle activation patterns in two-legged and one-legged stances in response to four levels of graded trunk loading in order to further our understanding the stabilization of the sacroiliac joints. Thirty male subjects experienced four levels of trunk loading (0%, 5%, 10% and 15% of body weight) by holding a bucket at one side, at three conditions: 1) two-legged standing with the bucket in the dominant hand, 2) ipsilateral loading: one-legged standing with the bucket in the dominant hand while using the same-side leg, and 3) contralateral loading: one-legged standing using the same leg used in condition 2, but with the bucket in the non-dominant hand. During these tasks, EMG signals from eight lumbopelvic muscles were collected. ANOVA with repeated design was performed on normalized EMG's to test the main effect of load and condition, and interaction effects of load by condition. Latissimus dorsi and erector spinae muscles showed an antagonistic pattern of activity toward the direction of load which may suggest these muscles as lateral trunk stabilizers. Internal oblique muscles showed a co-activation pattern with increasing task demand, which may function to increase lumbopelvic stability (P < 0.05). No unilateral pattern of the internal obliques was observed during all trials. Our results suggest that the lumbopelvic region uses a similar strategy for load transfer in both double and single leg support positions which is not compatible with the arch analogy. Our findings are more consistent with a suspensory system (wire-spoke wheel model). If our proposed model holds true, the pelvic ring can only be integrated by adjusting tension in the spokes and by preserving rim integrity or continuity. Thus, we propose that in order to restore tension integrity throughout the pelvic ring, efforts to unlock restrictions, muscular correction of positional faults and lumbopelvic or even respiratory exercises following sacroiliac joint dysfunctions must be taken into consideration. Our hypothetical model may initiate thinking and act as a guide to future work based on a biomechanical approach to the problem of sacroiliac joint dysfunction. Copyright © 2014 Elsevier Ltd. All rights reserved.

D-dimer, factor VIII and von Willebrand factor predict a non-dipping pattern of blood pressure in hypertensive patients.

PubMed

Agorasti, Athanasia; Trivellas, Theodoros; Mourvati, Efthimia; Papadopoulos, Vasilios; Tsatalas, Konstantinos; Vargemezis, Vasilios; Passadakis, Ploumis

2013-06-01

The aim of this study is to assess whether the haemostatic markers D-dimer, factor VIII (FVIII) and von Willebrand factor (VWF) are predictive of non-dipping status in treated hypertensive patients; so, as easy available laboratory data can predict non-dipping pattern and help with the selection of the patients whom circadian blood pressure should be re-examined. Forty treated hypertensive patients with essential hypertension were included in the study. Twenty-four-hour ambulatory blood pressure monitoring was performed in all patients. Daytime and nocturnal average systolic, diastolic and mean blood pressures were calculated. Patients were characterised as "non-dippers" on the basis of a less than 10 % decline in nocturnal blood pressure (BP); either systolic or diastolic or mean (MAP). D-dimer as marker of fibrinolytic function, FVIII activity and VWF antigen as marker of endothelial dysfunction were measured on plasma. The predictive efficiency was analysed by receiver operating characteristic (ROC) curves. Youden index was used for the estimation of the cut-off points and the associated values for sensitivity and 1-specificity. Plasma levels of D-dimer, FVIII and VWF were significantly higher in non-dippers as compared with dippers, irrespective of the classification used (BP index); all P < 0.05. The ROC curves indicated a good diagnostic efficiency for D-dimer (AUC(ROC) = 0.697, 0.715 and 0.774), FVIII (AUC(ROC) = 0.714, 0.692 and 0.755) and VWF (AUC(ROC) = 0.706, 0.740 and 0.708) in distinguishing non-dipping pattern (systolic, diastolic or mean) in the study population; all P < 0.05. Among the three haemostatic markers, D-dimer presents the most satisfactory sensitivity/1-specificity for the differentiation of non-dippers, with a cut-off point >168 ng/ml (sensitivity/1-specificity for systolic BP non-dippers of 0.789/0.381, for diastolic BP non-dippers 0.923/0.444 and for MAP non-dippers 0.875/0.375). In conclusion, D-dimer has a good predictive value for non-dipping pattern and the decision for the 24-h ambulatory blood pressure re-monitoring among dippers could rely on its values.

The relationship between red blood cell distribution width and blood pressure abnormal dipping in patients with essential hypertension: a cross-sectional study.

PubMed

Su, Dan; Guo, Qi; Gao, Ya; Han, Jin; Yan, Bin; Peng, Liyuan; Song, Anqi; Zhou, Fuling; Wang, Gang

2016-02-23

To investigate whether red blood cell distribution width (RDW) is associated with the blood pressure (BP) reverse-dipper pattern in patients with hypertension. Cross-sectional study. Single centre. Patients with essential hypertension were included in our study (n=708). The exclusion criteria included age <18 or >90 years, incomplete clinical data, night workers, diagnosis of secondary hypertension, under antihypertensive treatment, intolerance for the 24 h ambulatory BP monitoring (ABPM) and BP reading success rate <70%. Physical examination and ABPM were performed for all patients in our study. The value of RDW was measured using an automated haematology analyser. The distribution of RDW in patients with hypertension among different circadian BP pattern groups was analyzed using analysis of variance (ANOVA). Multinomial logistic regression was applied to explore the associations of RDW and other relevant variables with ABPM results. There was significantly increased RDW in reverse dippers (13.52 ± 1.05) than dippers (13.25 ± 0.85) of hypertension (p=0.012). Moreover, multinomial logistic regression analysis showed that RDW (OR 1.325, 95% CI 1.037 to 1.692, p=0.024) and diabetes mellitus (OR 2.286, 95% CI 1.380 to 3.788, p=0.001) were significantly different when comparing the reverse-dipper BP pattern with the dipper pattern. However, there was no difference of RDW between the non-dipper pattern and the reverse-dipper pattern (OR 1.036, 95% CI 0.867 to 1.238, p=0.693). In addition to this, RDW was negatively correlated with the decline rate of nocturnal systolic BP (r=-0.113; p=0.003) and diastolic BP (r=-0.101; p=0.007). Our results suggested that RDW might associate with the abnormal dipper BP patterns of either reverse dipping or non-dipping homogeneously examined with 24 h ABPM. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Simulation of 6 to 3 to 1 merge and squeeze of Au77+ bunches in AGS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gardner, C. J.

2016-05-09

In order to increase the intensity per Au77+ bunch at AGS extraction, a 6 to 3 to 1 merge scheme was developed and implemented by K. Zeno during the 2016 RHIC run. For this scheme, 12 Booster loads, each consisting of a single bunch, are delivered to AGS per AGS magnetic cycle. The bunch from Booster is itself the result of a 4 to 2 to 1 merge which is carried out on a flat porch during the Booster magnetic cycle. Each Booster bunch is injected into a harmonic 24 bucket on the AGS injection porch. In order to fitmore » into the buckets and allow for the AGS injection kicker rise time, the bunch width must be reduced by exciting quadrupole oscillations just before extraction from Booster. The bunches are injected into two groups of six adjacent harmonic 24 buckets. In each group the 6 bunches are merged into 3 by bringing on RF harmonic 12 while reducing harmonic 24. This is a straightforward 2 to 1 merge (in which two adjacent bunches are merged into one). One ends up with two groups of three adjacent bunches sitting in harmonic 12 buckets. These bunches are accelerated to an intermediate porch for further merging. Doing the merge on a porch that sits above injection energy helps reduce losses that are believed to be due to the space-charge force acting on the bunched particles. (The 6 to 3 merge is done on the injection porch because the harmonic 24 frequency on the intermediate porch would be too high for the AGS RF cavities.) On the intermediate porch each group of 3 bunches is merged into one by bringing on RF harmonics 8 and 4 and then reducing harmonics 12 and 8. One ends up with 2 bunches, each the result of a 6 to 3 to 1 merge and each sitting in a harmonic 4 bucket. This puts 6 Booster loads into each bunch. Each merged bunch needs to be squeezed into a harmonic 12 bucket for subsequent acceleration. This is done by again bringing on harmonic 8 and then harmonic 12. Results of simulations of the 6 to 3 to 1 merge and the subsequent squeeze into harmonic 12 buckets are presented in this note. In particular, they provide a benchmark for what can be achieved with the available RF voltages.« less

The energy consumption and cost savings of truck electrification for heavy duty vocational applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, Zhiming; Lin, Zhenhong; Franzese, Oscar

This paper evaluates the application of battery electric vehicles (BEVs) and genset plug-in hybrid electric vehicles (PHEVs) to Class-7 local delivery trucks and genset PHEV for Class-8 utility bucket trucks over widely real-world driving data performed by conventional heavy-duty trucks. A simulation tool based on vehicle tractive energy methodology and component efficiency for addressing component and system performance was developed to evaluate the energy consumption and performance of the trucks. As part of this analysis, various battery sizes combined with different charging powers on the E-Trucks for local delivery and utility bucket applications were investigated. The results show that themore » E-Truck applications not only reduce energy consumption but also achieve significant energy cost savings. For delivery E-Trucks, the results show that periodic stops at delivery sites provide sufficient time for battery charging, and for this reason, a high-power charger is not necessary. For utility bucket PHEV trucks, energy consumption per mile of bucket truck operation is typically higher because of longer idling times and extra high idling load associated with heavy utility work. The availability of on-route charging is typically lacking at the work sites of bucket trucks; hence, the battery size of these trucks is somewhat larger than that of the delivery trucks studied.« less

US Hybrid Bucket Truck APM Phase I Final Scientific Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goodarzi, Abas

Presently, there are approximately 166,000 medium- and heavy-duty (MD/HD) bucket trucks operating in the United States, the majority of which are diesel powered. These vehicles spend a significant amount of time idling at the work site to power the truck’s hydraulic boom, lights, auxiliary equipment, and cabin heating and cooling. Nationally, bucket trucks use 0.5 billion gallons of diesel fuel annually, representing 1.5 percent of the U.S.’s total diesel fuel consumption [ ]. Increasing fuel costs and environmental concerns are driving efforts to develop cleaner, quieter, more productive, and more energy efficient bucket trucks. The emissions of the bucket truckmore » have a direct effect on public health. Bucket trucks operation mode imposes heavy loads on the powertrain and results in very poor fuel efficiency and high emissions. Electric powertrains perform well in such conditions, and in recent years, a number of initiatives have been launched to explore the potential of fuel cell electric systems for bucket truck propulsion. The proposed fuel cell powered ePTO offers the best ROI and compatibility with the existing vehicles and operation and also minimized the infrastructure need. To address these problems, US Hybrid Corporation has teamed with Hawaii Center for Advanced Transportation Technologies (HCATT) and Hawaii Natural Energy Institute (HNEI) and Hawaiian Electric Company (HECO) to perform a Phase I analysis on the development and deployment of a fuel cell powered bucket truck (FCBT) for operation by HECO within the City and County of Honolulu. Based on preliminary modeling of a typical bucket truck operation, it is anticipated that the fuel cell powertrain will provide a 200% fuel economy improvement with zero emissions job-site operation and lower operating noise. The zero-emission ePTO bucket truck will also support the Greenhouse Gas (GHG) emission goals set forth by the federal government as well as the State of Hawaii. The operators within the bucket industry will also benefit from the proposed fuel cell bucket truck with zero emission job-site operation and lower operating noise. The maximum benefits of a hybrid powertrain are realized when the system is designed for the specific duty cycle of the vehicle. In the case of the bucket truck, the duty cycle consists of approximately six hours (75% of time) field operation and two hours (25% of time) in cruising mode drive to and back from job sites. The vast majority of fuel is consumed in the field operation mode, in which the vehicle is much less efficient due to the high energy expenditure while inefficiently operating the hydraulic bucket handling equipment. The amount of fuel consumed to generate hydraulic power represents approximately 50% of the total fuel consumed in field operation mode. Our cost analysis indicated that the cost premium for commercial volume production has a payback time of four years based on a hydrogen cost of $6/kg, while providing lower noise, less maintenance cost with electrically driven variable speed pump and portable packaging.« less

Astronomy Activities.

ERIC Educational Resources Information Center

Greenstone, Sid

This document consists of activities and references for teaching astronomy. The activities (which include objectives, list of materials needed, and procedures) focus on: observing the Big Dipper and locating the North Star; examining the Big Dipper's stars; making and using an astrolabe; examining retograde motion of Mars; measuring the Sun's…

Association of Ambulatory Blood Pressure Monitoring parameters with the Framingham Stroke Risk Profile.

PubMed

Tsivgoulis, Georgios; Pikilidou, Maria; Katsanos, Aristeidis H; Stamatelopoulos, Kimon; Michas, Fotios; Lykka, Aikaterini; Zompola, Christina; Filippatou, Angeliki; Boviatsis, Efstathios; Voumvourakis, Konstantinos; Zakopoulos, Nikolaos; Manios, Efstathios

2017-09-15

The Framingham Stroke Risk Profile (FSRP) is a novel and reliable tool for estimating the 10-year probability for incident stroke in stroke-free individuals, while the predictive value of ambulatory blood pressure monitoring (ABPM) for first-ever and recurrent stroke has been well established. We sought to evaluate cross-sectionally the association of ABPM parameters with FSRP score in a large sample of 2343 consecutive stroke-free individuals (mean age: 56.0±12.9, 49.1% male) who underwent 24-hour ABPM. True hypertensives showed significantly higher FSRP (11.2±5.0) compared to the normotensives (8.2±5.0, p<0.001), while subjects with white coat hypertension also had higher FSRP (10.2±4.7) than normotensives (8.2±5.0, p<0.001). Compared to dippers that exhibited the lowest FSRP, non-dippers and reverse-dippers exhibited significantly higher FSRP (9.8±4.8 for dippers vs 10.6±5.2 and 11.5±5.0 for non-dippers and reverse-dippers respectively, p≤0.001 for comparisons). In univariate analyses, the ABPM parameters that had the strongest correlation with FSRP were 24-hour (r=0.440, p<0.001), daytime (r=0.435, p<0.001) and night-time (r=0.423; p<0.001) pulse pressure (PP). The best fitting model for predicting FSRP (R 2 =24.6%) on multiple linear regression analyses after adjustment for vascular risk factors not included in FSRP comprised the following parameters in descending order: 24-hour PP (β=0.349, p<0.001), daytime SBP variability (β=0.124, p<0.001), 24-hour HR variability (β=-0.091, p<0.001), mean 24-hour HR (β=-0.107, p<0.001), BMI (β=0.081, p<0.001) and dipping percentage (β=-0.063, p=0.001). 24-hour PP and daytime SBP variability are the two ABPM parameters that were more strongly associated with FSRP-score. Reverse dippers had the highest FSRP among all dipping status profiles. Copyright © 2017 Elsevier B.V. All rights reserved.

Erosion of Pelton buckets and changes in turbine efficiency measured in the HPP Fieschertal

NASA Astrophysics Data System (ADS)

Abgottspon, A.; Staubli, T.; Felix, D.

2016-11-01

Geometrical changes and material loss of Pelton turbine runners as well as changes in turbine efficiency were measured at HPP Fieschertal in Valais, Switzerland. The HPP is equipped with two horizontal axis Pelton units, with each 32 MW nominal power, 7.5 m3/s design discharge, 515 m head and two injectors. The injectors and the buckets are hard-coated. Hydro-abrasive erosion was quantified based on repeated measurements on two runner buckets using (i) 3d-scanning and (ii) a coating thickness gauge. Changes in efficiency were measured by applying the sliding needle procedure. In addition to these periodically performed measurements, efficiency was also continuously monitored. The highest erosion rate was measured during the first half of the sediment season 2012 including a major sediment transport event. Because the runner was not fully reconditioned at the beginning of this season, progressive damages occurred. After the event, a splitter width of 10 mm was measured, corresponding to 1.5 % of the inner bucket width. The cut-outs were eroded by up to 9 mm towards the axis. The efficiency reductions ranged from 1 % in the year with the major sediment transport event to insignificant differences in 2014, when the sediment load was small and only little hydro-abrasive erosion occurred.

How to Tell Time by the Big Dipper

ERIC Educational Resources Information Center

Wahl, M. Stoessel

1978-01-01

Asserting that the skills required to tell time by the Big Dipper necessitate both considerable classroom preparation and outdoor practice, this article is designed to help teachers and students prepare for both. Written for students at the fourth grade level, this article includes simple instructions and illustrations. (JC)

Magnetic Field Aided Indoor Navigation

DTIC Science & Technology

2009-03-01

fields; this 13 compass was made to look like the big dipper , so that the end of the bowl would point in the horizontal northward direction, also like...the big dipper [1]. From these early observations and uses, merchants began using compasses to navigate to their various trading locations. This was

Survival Position Location Using Star Sighting

DTIC Science & Technology

1959-08-20

sky connecting Polaris and the star at the end of the handle of the Big Dipper (Alkaid). As a final step he readjusts the tie-downs (making sure the...unskilled user in reliably finding the desired stars has been added. Qophasls is placed on the Big Dipper , Orion, Square of Pegasus, and Northern Cross

Different chronotherapeutic effects of valsartan and olmesartan in non-dipper hypertensive patients during valsartan treatment at morning.

PubMed

Ushijima, Kentaro; Nakashima, Hajime; Shiga, Tsuyoshi; Harada, Kazuhiro; Ishikawa, Shizukiyo; Ioka, Takashi; Ando, Hitoshi; Fujimura, Akio

2015-01-01

This study was undertaken to evaluate the differences in chronotherapeutic effects of angiotensin-II receptor blockers, valsartan and olmesartan in hypertensive patients with non-dipper blood pressure (BP) pattern during valsartan at morning. Ninety four patients were enrolled, and 40 patients were judged to be non-dippers. In these patients, same dose of valsartan was changed to evening (Val-E, n = 12), or olmesartan (equivalent dose of valsartan) was given at morning (Olm-M, n = 13) or evening (Olm-E, n = 15) for 4 months. BP decreased during sleep and increased during waking hours in Val-E group. In Olm-M and Olm-E groups, BP decreased during sleep and waking hours. Percent reduction in BP at night-time compared to BP at waking hours significantly increased after changing the dose regimen in each group. Serum creatinine decreased and estimated glomerular filtration rate (eGFR) elevated in Olm-M and Olm-E, but not Val-E groups. Positive correlation between systolic BP (SBP) during sleep and serum creatinine, and negative correlation between SBP during sleep and eGFR were detected. These data suggest that dipper BP pattern could be obtained by chronotherapeutic approach using valsartan and olmesartan in non-dipper patients with valsartan at morning. Morning and evening olmesartan, but not evening valsartan improved renal function in these patients. Copyright © 2014 Japanese Pharmacological Society. Production and hosting by Elsevier B.V. All rights reserved.

Aircraft Crash Survival Design Guide. Volume 4. Aircraft Seats, Restraints, Litters, and Cockpit/Cabin Delethalization

DTIC Science & Technology

1989-12-01

ILLUSTRATIONS (CONTD) 44 Tubular strut wire - bending energy absorber ...... ........... 91 45 Inversion tube concepL with typical force-deformation...expected from a rod-bending sled decelerator and a wire - bending seat load limiter (Refer- ences 35 and 36). Therefore, correcting the calculated...attaching the seat bucket to the rollers, compressive as well as tensile loads can be sustained. Two variations of the wire - bending device have been

Assessment of the diurnal blood pressure profile and detection of non-dippers based on home or ambulatory monitoring.

PubMed

Stergiou, George S; Nasothimiou, Efthimia G; Destounis, Antonios; Poulidakis, Emanouel; Evagelou, Irini; Tzamouranis, Dimitrios

2012-09-01

A unique advantage of ambulatory blood pressure (ABP) monitoring is the assessment of nocturnal blood pressure (BP) and the detection of non-dippers. This study assessed nocturnal BP and non-dippers using a novel home BP (HBP) monitor. Eighty-one hypertensives performed within 2 weeks ABP (24-h, Microlife WatchBP O3) and HBP monitoring (Microlife WatchBPN) during daytime (6 days, duplicate morning and evening measurements) and nighttime (automated asleep measurements, 3 nights, 3 readings/night). Patients' preference in using ABP or HBP was assessed by a questionnaire. Strong associations were found between ABP and HBP (intraclass correlation coefficients for awake systolic/diastolic 0.75/0.81; asleep 0.87/0.85). No statistically significant difference was found between HBP and ABP (mean difference ± SD awake systolic/diastolic 1.5 ± 10.1/-1.1 ± 6.0 mm Hg, P = 0.20/0.09; asleep -0.4 ± 7.8/-1.0 ± 5.3, P = 0.63/0.09). There was substantial agreement (74%, kappa 0.2) between ABP and HBP in the detection of non-dippers, which was similar to the previously reported test-retest reproducibility of repeated ABP monitoring in the diagnosis of non-dippers. Moderate to severe disturbance from ABP monitoring was reported by 18% of the participants and severe restriction of their daily activities by 9, vs. 3 and 1.5%, respectively for HBP (P < 0.001/ <0.01, for comparisons respectively). Nighttime BP monitoring and cuff discomfort were the main complaints for ABP (46 and 32%, respectively) and HBP (34 and 28%), whereas 89% reported more nighttime sleep disturbance by ABP than HBP (P < 0.001). HBP monitoring appears to be a reliable and well accepted by users alternative to ABP for the assessment of nocturnal BP and the detection of non-dippers.

30 CFR 75.1401 - Hoists; rated capacities; indicators.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hoists; rated capacities; indicators. 75.1401... Hoists; rated capacities; indicators. Hoists shall have rated capacities consistent with the loads handled. An accurate and reliable indicator of the position of the cage, platform, skip, bucket, or cars...

30 CFR 75.1401 - Hoists; rated capacities; indicators.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Hoists; rated capacities; indicators. 75.1401... Hoists; rated capacities; indicators. Hoists shall have rated capacities consistent with the loads handled. An accurate and reliable indicator of the position of the cage, platform, skip, bucket, or cars...

30 CFR 77.1602 - Use of aerial tramways to transport persons.

Code of Federal Regulations, 2010 CFR

2010-07-01

... other than maintenance men shall not ride empty buckets on aerial tramways unless the following features are provided: (a) Two independent brakes, each capable of holding the maximum load. (b) Direct communication between terminals. (c) Power drives with emergency power available in case of primary power...

40 CFR 60.676 - Reporting and recordkeeping.

Code of Federal Regulations, 2011 CFR

2011-07-01

... elevator, bagging operation, or enclosed truck or railcar loading station: (i) The rated capacity in... following such change. At the time of such change, this screening operation, bucket elevator, or belt... hour of the replacement equipment. (2) For a screening operation: (i) The total surface area of the top...

40 CFR 60.676 - Reporting and recordkeeping.

Code of Federal Regulations, 2012 CFR

2012-07-01

... elevator, bagging operation, or enclosed truck or railcar loading station: (i) The rated capacity in... following such change. At the time of such change, this screening operation, bucket elevator, or belt... hour of the replacement equipment. (2) For a screening operation: (i) The total surface area of the top...

40 CFR 60.676 - Reporting and recordkeeping.

Code of Federal Regulations, 2014 CFR

2014-07-01

... elevator, bagging operation, or enclosed truck or railcar loading station: (i) The rated capacity in... following such change. At the time of such change, this screening operation, bucket elevator, or belt... hour of the replacement equipment. (2) For a screening operation: (i) The total surface area of the top...

40 CFR 60.676 - Reporting and recordkeeping.

Code of Federal Regulations, 2013 CFR

2013-07-01

... elevator, bagging operation, or enclosed truck or railcar loading station: (i) The rated capacity in... following such change. At the time of such change, this screening operation, bucket elevator, or belt... hour of the replacement equipment. (2) For a screening operation: (i) The total surface area of the top...

Ambulatory Blood Pressure Monitoring Profile as a Useful Prognostic Tool in Patients with Primary Hypertension

PubMed Central

Mohamed, A. L.; Katiman, E; Hassan, J Abu

2003-01-01

Ambulatory blood pressure monitoring (ABPM) devices are increasingly being used in the assessment of hypertension. The purpose of the study was to investigate patient’s diurnal BP variation and to further determine the differences of BP readings between male and female patients and the effects of age in patients who attended the clinic with essential hypertension. In addition, evidence of relationship between the parameters recorded by 24-hour ABPM was also investigated. This study was conducted in an outpatient specialist clinic. Two indices were used to demonstrate the diurnal BP variation. Firstly, the diurnal systolic blood pressure (SBP) and diastolic blood pressure (DBP) variations which were calculated as night/day BP ratio for SBP and DBP respectively. Anyone scoring less than 100% were categorised as dippers. Secondly, nocturnal falls in SBP and DBP were calculated as (awake SBP-sleep SBP)/awake SBP x 100 and (awake DBP-sleep DBP)/awake DBP x 100 respectively. The results showed that there was no significant difference in the mean BP between male and female patients. In general, the study sample were categorised as dippers and non dippers. There were more male dippers than female dippers. Finally correlation analysis revealed that age is related to SBP variables whilst night HR showed positive correlation with night time BP. It is concluded that ABPM was shown to be a useful tool to analyse the variation and prevalence of cardiovascular risk markers in hypertensive patients and can easily be done in an outpatient set-up. PMID:23386801

Circadian blood pressure rhythm in normotensive offspring of hypertensive parents.

PubMed

Toker, Rabia Tutuncu; Yildirim, Ali; Demir, Tevfik; Ucar, Birsen; Kilic, Zubeyir

2015-01-01

The aim of this study was to explore the circadian blood pressure (BP) rhythm using ambulatory BP monitoring (ABPM) in normotensive children with a family history of essential hypertension. Group 1 consisted of children with hypertensive mothers and/or fathers (n = 20), Group 2 consisted of children with hypertensive grandparents (n = 20), and Group 3 consisted of children with normotensive parents (n = 20). All participating children underwent a 24-h ABPM and echocardiography. Significantly higher systolic burden was found in children with hypertensive parents (p < 0.05) and grandparents (p < 0.05) compared to controls. Ambulatory BP measurements had a higher daytime systolic BP in Group 1 compared to controls (p < 0.05). While left ventricular (LV) posterior wall thickness was similar in Group 1 and Group 2, it was significantly higher in both of these groups compared to the controls. The LV mass index (LVMI) was significantly higher in Group 1 than in controls (p < 0.05). However, diastolic BP was significantly higher in dippers compared to non-dippers (p < 0.05). LV posterior wall thickness, interventricular septum thickness and LVMI were significantly higher among non-dippers compared to dippers (p < 0.05). In children with a family history of hypertension, a positive correlation between nocturnal systolic BP and LVMI was found, and increasing nocturnal BP values were associated with increasing LVMI (p < 0.01). In children with a family history of hypertension, target-organ damage may precede the clinical detection of hypertension, and in those with a nocturnal non-dipper status, a more marked effect on LVMI may occur.

Adiponectin, insulin resistance, and left ventricular structure in dipper and nondipper essential hypertensive patients.

PubMed

Della Mea, Paolo; Lupia, Mario; Bandolin, Valentina; Guzzon, Samuele; Sonino, Nicoletta; Vettor, Roberto; Fallo, Francesco

2005-01-01

Adiponectin is an adipocyte-derived protein with insulin-sensitizing and antiatherogenic properties. Failure to decrease blood pressure (BP) normally during night in hypertensive patients has been independently associated with left ventricular hypertrophy. We examined the relationship between adiponectin levels, insulin sensitivity, and left ventricular structure in 40 newly diagnosed never-treated patients with essential hypertension, including 20 patients with a normal night-time pressure decrease (ie, dippers) and 20 patients with BP persistently elevated throughout the 24-h period (ie, nondippers). All subjects had grade 1-2 hypertension, aged 18 to 65 years, no diabetes mellitus, no obesity, no hyperlipidemia, and no cardiopulmonary, renal, or hepatic disease. The two groups of patients were similar for age, sex, body mass index, and had no differences for clinic, 24-h, and diurnal BP, and 24-h, diurnal, and nocturnal heart rate, as well as glucose, total cholesterol, and triglyceride levels. Plasma insulin and homeostasis model assessment (HOMA index) were higher (P < .01), and adiponectin levels were lower (P < .005) in nondippers than in dippers. Adiponectin correlated inversely with HOMA index and insulin levels (r = -0.58, and r = -0.62, respectively, P < .001) in the entire population. Nondippers showed left ventricular mass, relative wall thickness, and measure of early and late diastolic peak flow velocity ratio similar to those of dippers. In the absence of major cardiovascular risk factors, nondipper essential hypertensive patients show more prominent insulin resistance and lower adiponectin compared to dippers. Therapeutic modulation of adiponectin or insulin resistance might provide additional benefit to the conventional antihypertensive treatment.

Circadian variation of acute aortic dissection.

PubMed

Seguchi, Masaru; Wada, Hiroshi; Sakakura, Kenichi; Nakagawa, Tom; Ibe, Tatsuro; Ikeda, Nahoko; Sugawara, Yoshitaka; Ako, Junya; Momomura, Shin-ichi

2015-05-13

Acute aortic dissection (AAD) is a life-threatening cardiovascular disease with high mortality. Hypertension is a well known risk factor of AAD. There have been previous reports about the association between circadian variation of blood pressure (BP) and cardiovascular events. However, little is known about the association between the onset-time of AAD and circadian variation of BP. The purpose of this study was to clarify the characteristics of circadian variation of BP in AAD and its relation to the onset-time of this disease. This study included type B spontaneous AAD patients who were referred to our institution and treated conservatively between January 2008 and June 2013. Patients with type A AAD, secondary to trauma, and type B AAD which preceded surgical intervention were excluded. Data were retrospectively collected from the hospital medical records. Sixty-eight patients with type B AAD were enrolled. The distribution of the circadian pattern in the study patients was as follows: extreme-dipper, 0% (none); dipper, 20.6% (n = 14); nondipper, 50% (n = 34); riser, 29.4% (n = 20). Non-dipper and riser patterns were more frequently observed compared with other population studies reported previously. Moreover, no patient in the dipper group had night-time onset while 31.5% of the patients in the absence of nocturnal BP fall group (non-dipper and riser) did (P = 0.01). Absence of a nocturnal BP fall was frequently seen in AAD patients. Absence of a nocturnal BP fall may be a risk factor of AAD. Circadian variation of BP may also affect the onset-time of type B AAD.

Zero Horizontal Reaction Force Excavator

NASA Technical Reports Server (NTRS)

Mueller, Robert P. (Inventor); Nick, Andrew J. (Inventor); Schuler, Jason M. (Inventor); Smith, Jonathan D. (Inventor)

2015-01-01

An excavator includes a mobile chassis with a first bucket drum and a second bucket drum coupled thereto. The first bucket drum and second bucket drum are coupled to the chassis for positioning thereof on the surface at opposing ends of the chassis. Each first scoop on the first bucket drum is a mirror image of one second scoop on the second bucket drum when (i) the first bucket drum and second bucket drum are on the surface adjacent opposing ends of the chassis, and (ii) the first bucket drum is rotated in one direction and the second bucket drum is simultaneously rotated in an opposing direction.

Efficient bulk-loading of gridfiles

NASA Technical Reports Server (NTRS)

Leutenegger, Scott T.; Nicol, David M.

1994-01-01

This paper considers the problem of bulk-loading large data sets for the gridfile multiattribute indexing technique. We propose a rectilinear partitioning algorithm that heuristically seeks to minimize the size of the gridfile needed to ensure no bucket overflows. Empirical studies on both synthetic data sets and on data sets drawn from computational fluid dynamics applications demonstrate that our algorithm is very efficient, and is able to handle large data sets. In addition, we present an algorithm for bulk-loading data sets too large to fit in main memory. Utilizing a sort of the entire data set it creates a gridfile without incurring any overflows.

Advanced Bridge Capacity and Structural Integrity Assessment Methodology

DTIC Science & Technology

2013-03-01

following major drawbacks to working stress design: • inability to account for variability of loads and resistance • lack of knowledge of the level of...CERL TR-13-3 81 Early inclinometers were simple pendulums or tubes of water with buckets on each end where the difference in water level between to

Factors influencing load-haul-dump operator line of sight in underground mining.

PubMed

Eger, Tammy; Salmoni, Alan; Whissell, Robert

2004-03-01

The inability of load-haul-dump (LHD) equipment operators to see people, objects or hazards around the LHD machine they drive is a causal factor in a number of serious accidents. Line of sight evaluations were conducted on 11 different LHD models. Results indicated blind spots were caused by cab posts, and vehicles lights and light brackets. Line of sight impairments were caused by wheel well covers, buckets, fire extinguisher, light posts, radiator covers, booms, radio remote boxes, elevated engine profiles and air intake cylinders. These results were supported by questionnaires completed by 130 LHD operators. The operators indicated the bucket, lights and light brackets, boom and cab impaired line of sight. Line of sight testing and LHD operator feedback indicated line of sight to the right front corner and back right corner were typically worse than line of sight to the front left side of the vehicle. Results of this study have been used to conduct awareness campaigns within the Ontario mining industry and to suggest vehicle design modifications to LHD manufacturers.

View of stars taken during Expedition Six

NASA Image and Video Library

2003-03-23

ISS006-E-40544 (March 2003) --- The entire Big Dipper is visible in this photograph taken by astronaut Donald R. Pettit, Expedition Six NASA ISS science officer, on board the International Space Station (ISS). The roughly rectangular bowl (center left) and “handle” (extending toward the upper right) are shaped by the brightest stars. The Dipper is upside-down, appearing to empty its contents.

Orbiter Payload Bay Bucket Hoist Mishap...An Accident We Should Never Forget

NASA Technical Reports Server (NTRS)

Lytle, Bradford P.

2009-01-01

This slide presentation reviews the accident that occurred in 1985 when a bay bucket hoist fell from its stowed position. This accident damaged the orbiter, injured a technician, and delayed the launch. The accident was investigated, and the cause of the accident was determined to be the practice of two-blocking. Two-blocking is the result of hoisting beyond the intended safe upper limit of hook travel to the point of solid contact between the load block and the upper block or hoist/trolley structure. The usual result is immediate failure of the wire rope, due to the ropes being cut by the grooves of the drum or sheaves. The design of the hoist, the inspection, and the operator training were all in part responsible for this failure.

Geotechnical centrifuge under construction

NASA Astrophysics Data System (ADS)

Richman, Barbara T.

Modifications are underway at the National Aeronautics and Space Administration (NASA) Ames Research Center in California to transform a centrifuge used in the Apollo space program to the largest geotechnical centrifuge in the free world. The centrifuge, to be finished in August and opened next January, following check out and tuning, will enable geoscientists to model stratigraphic features down to 275 m below the earth's surface. Scientists will be able to model processes that are coupled with body force loading, including earthquake response of earth structures and soil structure interaction; rubbled-bed behavior during in situ coal gasification or in oil shale in situ retorts; behavior of frozen soil; frost heave; behavior of offshore structures; wave-seabed interactions; explosive cratering; and blast-induced liquefaction.The centrifuge will have a load capacity of 900-g-tons (short); that is, it will be able to carry a net soil load of 3 short tons to a centripetal acceleration of 300 times the acceleration caused by gravity. Modified for a total cost of $2.4 million, the centrifuge will have an arm with a 7.6-m radius and a swinging platform or bucket at its end that will be able to carry a payload container measuring 2.1×2.1 m. An additional future input of $500,000 would enable the purchase of a larger bucket that could accommodate a load of up to 20 tons, according to Charles Babendreier, program director for geotechnical engineering at the National Science Foundation. Additional cooling for the motor would also be required. The centrifuge has the capability of accelerating the 20-ton load to 100 g.

Microfluidic size separation of cells and particles using a swinging bucket centrifuge.

PubMed

Yeo, Joo Chuan; Wang, Zhiping; Lim, Chwee Teck

2015-09-01

Biomolecular separation is crucial for downstream analysis. Separation technique mainly relies on centrifugal sedimentation. However, minuscule sample volume separation and extraction is difficult with conventional centrifuge. Furthermore, conventional centrifuge requires density gradient centrifugation which is laborious and time-consuming. To overcome this challenge, we present a novel size-selective bioparticles separation microfluidic chip on a swinging bucket minifuge. Size separation is achieved using passive pressure driven centrifugal fluid flows coupled with centrifugal force acting on the particles within the microfluidic chip. By adopting centrifugal microfluidics on a swinging bucket rotor, we achieved over 95% efficiency in separating mixed 20 μm and 2 μm colloidal dispersions from its liquid medium. Furthermore, by manipulating the hydrodynamic resistance, we performed size separation of mixed microbeads, achieving size efficiency of up to 90%. To further validate our device utility, we loaded spiked whole blood with MCF-7 cells into our microfluidic device and subjected it to centrifugal force for a mere duration of 10 s, thereby achieving a separation efficiency of over 75%. Overall, our centrifugal microfluidic device enables extremely rapid and label-free enrichment of different sized cells and particles with high efficiency.

One method for life time estimation of a bucket wheel machine for coal moving

NASA Astrophysics Data System (ADS)

Vîlceanu, Fl; Iancu, C.

2016-08-01

Rehabilitation of outdated equipment with lifetime expired, or in the ultimate life period, together with high cost investments for their replacement, makes rational the efforts made to extend their life. Rehabilitation involves checking operational safety based on relevant expertise of metal structures supporting effective resistance and assessing the residual lifetime. The bucket wheel machine for coal constitute basic machine within deposits of coal of power plants. The estimate of remaining life can be done by checking the loading on the most stressed subassembly by Finite Element Analysis on a welding detail. The paper presents step-by-step the method of calculus applied in order to establishing the residual lifetime of a bucket wheel machine for coal moving using non-destructive methods of study (fatigue cracking analysis + FEA). In order to establish the actual state of machine and areas subject to study, was done FEA of this mining equipment, performed on the geometric model of mechanical analyzed structures, with powerful CAD/FEA programs. By applying the method it can be calculated residual lifetime, by extending the results from the most stressed area of the equipment to the entire machine, and thus saving time and money from expensive replacements.

Microfluidic size separation of cells and particles using a swinging bucket centrifuge

PubMed Central

Yeo, Joo Chuan; Wang, Zhiping; Lim, Chwee Teck

2015-01-01

Biomolecular separation is crucial for downstream analysis. Separation technique mainly relies on centrifugal sedimentation. However, minuscule sample volume separation and extraction is difficult with conventional centrifuge. Furthermore, conventional centrifuge requires density gradient centrifugation which is laborious and time-consuming. To overcome this challenge, we present a novel size-selective bioparticles separation microfluidic chip on a swinging bucket minifuge. Size separation is achieved using passive pressure driven centrifugal fluid flows coupled with centrifugal force acting on the particles within the microfluidic chip. By adopting centrifugal microfluidics on a swinging bucket rotor, we achieved over 95% efficiency in separating mixed 20 μm and 2 μm colloidal dispersions from its liquid medium. Furthermore, by manipulating the hydrodynamic resistance, we performed size separation of mixed microbeads, achieving size efficiency of up to 90%. To further validate our device utility, we loaded spiked whole blood with MCF-7 cells into our microfluidic device and subjected it to centrifugal force for a mere duration of 10 s, thereby achieving a separation efficiency of over 75%. Overall, our centrifugal microfluidic device enables extremely rapid and label-free enrichment of different sized cells and particles with high efficiency. PMID:26487900

Deep Constrained Siamese Hash Coding Network and Load-Balanced Locality-Sensitive Hashing for Near Duplicate Image Detection.

PubMed

Hu, Weiming; Fan, Yabo; Xing, Junliang; Sun, Liang; Cai, Zhaoquan; Maybank, Stephen

2018-09-01

We construct a new efficient near duplicate image detection method using a hierarchical hash code learning neural network and load-balanced locality-sensitive hashing (LSH) indexing. We propose a deep constrained siamese hash coding neural network combined with deep feature learning. Our neural network is able to extract effective features for near duplicate image detection. The extracted features are used to construct a LSH-based index. We propose a load-balanced LSH method to produce load-balanced buckets in the hashing process. The load-balanced LSH significantly reduces the query time. Based on the proposed load-balanced LSH, we design an effective and feasible algorithm for near duplicate image detection. Extensive experiments on three benchmark data sets demonstrate the effectiveness of our deep siamese hash encoding network and load-balanced LSH.

Epicardial adipose tissue volume a diagnostic study for independent predicting disorder of circadian rhythm of blood pressure in patients with essential hypertension.

PubMed

Zhou, L; Deng, Y; Gong, J; Chen, X; Zhang, Q; Wang, J

2016-05-30

The aim of the study was to determine whether epicardial adipose tissue volume (EATV), a new cardiometabolic risk factor, is associated with circadian changes of blood pressure (BP) in patients with newly diagnosed essential hypertension. Ninety patients with newly diagnosed essential hypertension underwent ambulatory blood pressure monitoring for 24 h. EATV was measured using cardiac computed tomography. These patients were categorized into three groups according to their BP patterns (group 1, n=46, dipper hypertension, also called normal pattern; group 2, n=24, non-dipper hypertension; group 3, n=20, anti-dipper hypertension; group 2 and 3 are also called abnormal pattern). Data were collected retrospectively and compared between hypertensive patients with normal pattern and abnormal pattern. The normal pattern hypertensive patient had significant lower mean EATV and BP ((EATV, 91.3±29.4 cm3) than those of abnormal pattern patients including group 2 (EATV, 116.2±31.06cm3, <0.01) and group 3 (EATV, 124.8±28.5cm3, P<0.01). Mean systolic BP over 24 h (BPs24) and mean diastolic BP over 24 h (BPd24) of group 1 (BPs24, 135.7 ± 12.6 mmHg; BPd24, 83.6 ± 10.6 mmHg) were significantly lower than those of group 2 (BPs24, 150.1± 17.6 mmHg, P<0.01; BPd24, 93.2 ± 16.5 mmHg, P<0.01) and group 3 (BPs24, 154.1 ± 16.6mmHg, P<0.01; BPd24, 93.8 ± 17.5 mmHg; P<0.01). Bivariate correlation analysis showed that correlation coefficient of EATV with abnormal blood pressure mode was 0.500 (p<0.001), partial correlation coefficient after adjustment for waist circumference and body mass index was 0.469 (p<0.001). When multivariate backward logistic regression analysis was performed to assess the correlation of BP pattern with EAT volume, it showed that the prevalence of abnormal BP pattern (non-dipper and anti-dipper BP pattern) increased by 1.54 times after adjusting for age and gender per additional 10 cm3 of EAT volume. Receiver operating characteristic curve for EAT alone indicated that the cutoff value of 95.17cm3 had the best performance in predicting abnormal BP pattern with a sensitivity of 75.0% and a specificity of 72.7%. EATV was elevated in newly diagnosed and untreated patients with non-dipper hypertension and anti-dipper hypertension. EATV measured by cardiac computed tomography can be used to indicate the increased risk of circadian rhythm of blood pressure.

Numerical analysis of the bucket surface roughness effects in Pelton turbine

NASA Astrophysics Data System (ADS)

Xiao, Y. X.; Zeng, C. J.; Zhang, J.; Yan, Z. G.; Wang, Z. W.

2013-12-01

The internal flow of a Pelton turbine is quite complex. It is difficult to analyse the unsteady free water sheet flow in the rotating bucket owing to the lack of a sound theory. Affected by manufacturing technique and silt abrasion during the operation, the bucket surface roughness of Pelton turbine may be too great, and thereby influence unit performance. To investigate the effect of bucket roughness on Pelton turbine performance, this paper presents the numerical simulation of the interaction between the jet and the bucket in a Pelton turbine. The unsteady three-dimensional numerical simulations were performed with CFX code by using the SST turbulence model coupling the two-phase flow volume of fluid method. Different magnitude orders of bucket surface roughness were analysed and compared. Unsteady numerical results of the free water sheet flow patterns on bucket surface, torque and unit performance for each bucket surface roughness were generated. The total pressure distribution on bucket surface is used to show the free water sheet flow pattern on bucket surface. By comparing the variation of water sheet flow patterns on bucket surface with different roughness, this paper qualitatively analyses how the bucket surface roughness magnitude influences the impeding effect on free water sheet flow. Comparison of the torque variation of different bucket surface roughness highlighted the effect of the bucket surface roughness on the Pelton turbine output capacity. To further investigate the effect of bucket surface roughness on Pelton turbine performance, the relation between the relative efficiency loss rate and bucket surface roughness magnitude is quantitatively analysed. The result can be used to predict and evaluate the Pelton turbine performance.

Cue-induced reinstatement of ethanol seeking in Sardinian alcohol-preferring rats.

PubMed

Maccioni, Paola; Orrú, Alessandro; Korkosz, Agnieszka; Gessa, Gian Luigi; Carai, Mauro A M; Colombo, Giancarlo; Bienkowski, Przemyslaw

2007-02-01

The purpose of the present study was to characterize cue-induced reinstatement of ethanol seeking in selectively bred Sardinian alcohol-preferring (sP) rats trained to lever press for ethanol in 30-min self-administration sessions. Four responses on an "active" lever led to presentation of 0.1 ml of 15% (vol/vol) ethanol by a liquid dipper and concurrent activation of a set of discrete light and auditory cues. In a 70-min extinction/reinstatement session, responding was first extinguished for 60 min. Subsequently, different stimuli were delivered in a noncontingent manner and reinstatement of nonreinforced responding was assessed. Fifteen presentations of the ethanol-predictive stimulus complex, including the dipper cup containing 5 or 15% ethanol, potently reinstated responding on the previously active lever. The magnitude of reinstatement increased with the number of stimulus presentations and concentration of ethanol presented by the dipper cup. Fifteen presentations of the ethanol-predictive stimulus complex, including the dipper cup filled with water (0% ethanol), did not produce any reinstatement. These results indicate that (1) noncontingent presentations of the ethanol-predictive stimulus complex may reinstate ethanol seeking in sP rats and (2) the orosensory properties of ethanol may play an important role in reinstatement of ethanol seeking in sP rats. The latter finding concurs with clinical observations that odor and taste of alcoholic beverages elicit immediate craving responses in abstinent alcoholics.

Nocturnal blood pressure non-dipping is not associated with increased left ventricular mass index in hypertensive children without end-stage renal failure.

PubMed

Seeman, Tomáš; Hradský, Ondřej; Gilík, Jiří

2016-08-01

The aim of our study was to investigate whether nocturnal blood pressure (BP) dip is associated with increased left ventricular mass index and hypertrophy in children with hypertension (HT). We retrospectively reviewed data from all children with confirmed ambulatory HT in our center and performed ambulatory blood pressure monitoring (ABPM) and echocardiography at the same time. Left ventricular hypertrophy (LVH) was defined as left ventricular mass index (LVMI) ≥95th centile. Non-dipping phenomenon was defined as nocturnal BP dip <10 %. A total of 114 ABPM studies were included, the median age of children was 15.3 years (3.8-18.9), 80 children had renoparenchymal HT without end-stage renal failure, 34 had primary HT, and 27 studies were done on untreated children and 87 on treated children. Non-dipping phenomenon was present in 63 (55 %) studies (non-dippers). The LVMI adjusted for age was not significantly different between non-dippers and dippers (0.87 ± 0.03 vs. 0.81 ± 0.02, p = 0.13). Left ventricular hypertrophy was not significantly higher in non-dippers than in dippers (20 vs. 9 %, p = 0.12). Hypertensive children without end-stage renal failure with non-dipping phenomenon do not have increased prevalence of LVH or higher LVMI adjusted for age than hypertensive children with preserved nocturnal BP dip. • Adult and pediatric hypertensive patients with end-stage renal failure have often nocturnal blood pressure non-dipping phenomenon. • Non-dipping phenomenon is in patients with end-stage renal failure associated with increased prevalence of left ventricular hypertrophy. What is New: • Pediatric hypertensive patients without end-stage renal failure with blood pressure non-dipping phenomenon do not have increased prevalence of left ventricular hypertrophy.

The efficiency of gravity distribution devices for on-site wastewater treatment systems.

PubMed

Patel, T; O'Luanaigh, N; Gill, L W

2008-01-01

A detailed analysis of different types of gravity distribution devices, designed to split on-site wastewater effluent equally between percolation trenches, has been carried out both in the laboratory and also in the field under realistic loading conditions. Five different types of distribution device have been compared: a V-notch distribution box, stilling chamber box, T-splitters with and without baffles and tipping bucket device. The trials carried out in the laboratory with clean water showed that flow distribution for all devices was sensitive to both the off-level installation angles and variable flow rates, with the most stable performance achieved using the T-splitters with baffles and tipping bucket devices. In parallel to this, the on-site flow regime experienced at two sites was continuously monitored using a tipping bucket and data-logger over eighteen month periods, finding that the most common flow rates at the distribution unit were in the range of 0.1-2.5 L/min. The on-site performance of these devices receiving both septic tank and secondary treated effluent showed that significant solid deposition and biofilm development had severely affected the equal distribution between the trenches, hence highlighting the need for regular maintenance to ensure efficient performance over time after installation. IWA Publishing 2008.

30. HULETT NO. 2 IN MOTION; OPERATOR HAS JUST DUMPED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

30. HULETT NO. 2 IN MOTION; OPERATOR HAS JUST DUMPED A GRAB BUCKET OF ORE INTO THE RECEIVING HOPPER AND IS READY TO RETURN FOR ANOTHER LOAD. A ROUND TRIP FROM THE BOAT TO THE HOPPER AND BACK CAN BE MADE IN 50 SECONDS. - Pennsylvania Railway Ore Dock, Lake Erie at Whiskey Island, approximately 1.5 miles west of Public Square, Cleveland, Cuyahoga County, OH

DETAIL VIEW OF TRAM BUCKET FRAME, SHOWING CLAMPING MECHANISM,WITHOUT ORE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW OF TRAM BUCKET FRAME, SHOWING CLAMPING MECHANISM,WITHOUT ORE BUCKET AND WHEELS. THE FRAME IS LYING ON ITS SIDE. THE ORE BUCKET WAS ATTACHED TO THE LEFT SIDE, AND TWO WHEELS WERE ATTACHED TO THE SPINDLE ON THE RIGHT. THE FRAME AND BUCKET ARE SUSPENDED FROM THE STATIONARY CABLE BY THE TWO WHEELS, WITH THE ORE BUCKET HANGING BELOW. THE WHEEL AND LEVER AT CENTER WERE ACTIVATED BY THE OPENING AND CLOSING MECHANISMS ON THE TRAM TERMINALS TO LOCK OR RELEASE THE BUCKET ONTO THE MOVING CABLE THAT RAN THROUGH THE SQUARE BLOCK AT CENTER. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

Risk Factors for Developing Work-Related Musculoskeletal Disorders during Dairy Farming.

PubMed

Taghavi, Sayed Mohammad; Mokarami, Hamidreza; Ahmadi, Omran; Stallones, Lorann; Abbaspour, Asghar; Marioryad, Hossein

2017-01-01

Dairy farming work involves frequent use of poor postures. These postures may increase the risk of developing musculoskeletal disorders among dairy workers. To assess postural load during performance of various tasks related to dairy farming. This cross-sectional study was conducted on a dairy farm in Iran. In order to assess postural load, tasks related to dairy farming were divided into 3 categories: feeding, milking, and manure disposal. Each task was then divided into its constituent work subdivisions (tasks). Finally, the working posture for each work subdivision was evaluated using Rapid Entire Body Assessment (REBA). Based on the results from the REBA score, the poorest risk scores (risk level 4) were associated with the following tasks: (1) manure disposal, (2) filling feed bags, and (3) pouring milk into a bucket. Other tasks such as filling corn containers, pouring corn into the milling machine, preparing the feed, pouring food into mangers, attaching the milking machine, and pouring milk from a bucket into a tank imposed high risk (risk level 3). The risk for the tasks of washing and disinfecting the udders were assessed as medium risks. The risk levels associated with most of the tasks on the studied farm were unacceptably high. Therefore, it is essential to implement ergonomic interventions to reduce risk levels of the tasks.

63. VIEW OF FLAME BUCKET AND LAUNCHER FROM SOUTHEAST. TRICHLOROETHENE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

63. VIEW OF FLAME BUCKET AND LAUNCHER FROM SOUTHEAST. TRICHLOROETHENE RECOVERY TANK LEFT OF FLAME BUCKET; LIQUID OXYGEN CATCH TANK RIGHT OF FLAME BUCKET. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

Abnormal Circadian Blood Pressure Profile as a Prognostic Marker in Patients with Nonischemic Dilated Cardiomyopathy.

PubMed

Sawamura, Akinori; Okumura, Takahiro; Takeshita, Kyosuke; Watanabe, Naoki; Kano, Naoaki; Mori, Hiroaki; Fukaya, Kenji; Morimoto, Ryota; Hirashiki, Akihiro; Bando, Yasuko Kureishi; Murohara, Toyoaki

An abnormal circadian blood pressure (BP) profile is considered a risk factor for cardiovascular disease. However, its significance in heart failure patients with nonischemic etiology is unknown. Herein, we investigated the prognostic value of a circadian BP profile in patients with nonischemic dilated cardiomyopathy (NIDCM). We enrolled 114 NIDCM patients (76 males, mean age 53.1 years). The percent nighttime BP fall (%NBPF) was defined using ambulatory BP monitoring as a percent decrease in mean systolic BP in nighttime from daytime. All patients were divided into three groups: dipper (%NBPF ≥10), non-dipper (0 ≤ %NBPF < 10), and riser (%NBPF <0). Riser patients had the highest serum creatinine levels (dipper, 0.78 ± 0.20 mg/dl; non-dipper, 0.85 ± 0.21 mg/dl; riser, 0.99 ± 0.23 mg/dl; p = 0.006). In survival analysis, riser patients had the highest cumulative cardiac-related deaths (log-rank, p = 0.001), which was an independent predictor of cardiac-related deaths (hazard ratio, 12.6; 95% confidence interval, 1.76-253; p = 0.01). Multivariate analysis revealed that the norepinephrine level at 24-hour collected urine (24 h U-NE) and the serum creatinine level were independent determinants of %NBPF (adjusted R2 = 0.20; 24 h U-NE, p = 0.0001; serum creatinine, p = 0.04). The riser profile was associated with poor prognosis of NIDCM, which may reflect impaired sympathetic nervous system activity. Evaluating the circadian BP profile may be useful for risk stratification in NIDCM patients. © 2016 S. Karger AG, Basel.

Do American dippers obtain a survival benefit from altitudinal migration?

PubMed

Green, David J; Whitehorne, Ivy B J; Middleton, Holly A; Morrissey, Christy A

2015-01-01

Studies of partial migrants provide an opportunity to assess the cost and benefits of migration. Previous work has demonstrated that sedentary American dippers (residents) have higher annual productivity than altitudinal migrants that move to higher elevations to breed. Here we use a ten-year (30 period) mark-recapture dataset to evaluate whether migrants offset their lower productivity with higher survival during the migration-breeding period when they occupy different habitat, or early and late-winter periods when they coexist with residents. Mark-recapture models provide no evidence that apparent monthly survival of migrants is higher than that of residents at any time of the year. The best-supported model suggests that monthly survival is higher in the migration-breeding period than winter periods. Another well-supported model suggested that residency conferred a survival benefit, and annual apparent survival (calculated from model weighted monthly apparent survival estimates using the Delta method) of residents (0.511 ± 0.038SE) was slightly higher than that of migrants (0.487 ± 0.032). Winter survival of American dippers was influenced by environmental conditions; monthly apparent survival increased as maximum daily flow rates increased and declined as winter temperatures became colder. However, we found no evidence that environmental conditions altered differences in winter survival of residents and migrants. Since migratory American dippers have lower productivity and slightly lower survival than residents our data suggests that partial migration is likely an outcome of competition for limited nest sites at low elevations, with less competitive individuals being forced to migrate to higher elevations in order to breed.

Numerical simulation of cavitation flow characteristic on Pelton turbine bucket surface

NASA Astrophysics Data System (ADS)

Zeng, C. J.; Xiao, Y. X.; Zhu, W.; Yao, Y. Y.; Wang, Z. W.

2015-01-01

The internal flow in the rotating bucket of Pelton turbine is free water sheet flow with moving boundary. The runner operates under atmospheric and the cavitation in the bucket is still a controversial problem. While more and more field practice proved that there exists cavitation in the Pelton turbine bucket and the cavitation erosion may occur at the worst which will damage the bucket. So a well prediction about the cavitation flow on the bucket surface of Pelton turbine and the followed cavitation erosion characteristic can effectively guide the optimization of Pelton runner bucket and the stable operation of unit. This paper will investigate the appropriate numerical model and method for the unsteady 3D water-air-vapour multiphase cavitation flow which may occur on the Pelton bucket surface. The computational domain will include the nozzle pipe flow, semi-free surface jet and runner domain. Via comparing the numerical results of different turbulence, cavity and multiphase models, this paper will determine the suitable numerical model and method for the simulation of cavitation on the Pelton bucket surface. In order to investigate the conditions corresponding to the cavitation phenomena on the bucket surface, this paper will adopt the suitable model to simulate the various operational conditions of different water head and needle travel. Then, the characteristics of cavitation flow the development process of cavitation will be analysed in in great detail.

30 CFR 57.19076 - Maximum speeds for hoisting persons in buckets.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Maximum speeds for hoisting persons in buckets... NONMETAL MINES Personnel Hoisting Hoisting Procedures § 57.19076 Maximum speeds for hoisting persons in buckets. When persons are hoisted in buckets, speeds shall not exceed 500 feet per minute and shall not...

30 CFR 56.19076 - Maximum speeds for hoisting persons in buckets.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Maximum speeds for hoisting persons in buckets... MINES Personnel Hoisting Hoisting Procedures § 56.19076 Maximum speeds for hoisting persons in buckets. When persons are hoisted in buckets, speeds shall not exceed 500 feet per minute and shall not exceed...

30 CFR 56.19076 - Maximum speeds for hoisting persons in buckets.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum speeds for hoisting persons in buckets... MINES Personnel Hoisting Hoisting Procedures § 56.19076 Maximum speeds for hoisting persons in buckets. When persons are hoisted in buckets, speeds shall not exceed 500 feet per minute and shall not exceed...

30 CFR 57.19076 - Maximum speeds for hoisting persons in buckets.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum speeds for hoisting persons in buckets... NONMETAL MINES Personnel Hoisting Hoisting Procedures § 57.19076 Maximum speeds for hoisting persons in buckets. When persons are hoisted in buckets, speeds shall not exceed 500 feet per minute and shall not...

46 CFR 181.610 - Fire bucket.

Code of Federal Regulations, 2011 CFR

2011-10-01

... PROTECTION EQUIPMENT Additional Equipment § 181.610 Fire bucket. A vessel not required to have a power driven fire pump by § 181.300 must have at least three 9.5 liter (21/2 gallon) buckets, with an attached... 46 Shipping 7 2011-10-01 2011-10-01 false Fire bucket. 181.610 Section 181.610 Shipping COAST...

46 CFR 181.610 - Fire bucket.

Code of Federal Regulations, 2012 CFR

2012-10-01

... PROTECTION EQUIPMENT Additional Equipment § 181.610 Fire bucket. A vessel not required to have a power driven fire pump by § 181.300 must have at least three 9.5 liter (21/2 gallon) buckets, with an attached... 46 Shipping 7 2012-10-01 2012-10-01 false Fire bucket. 181.610 Section 181.610 Shipping COAST...

46 CFR 181.610 - Fire bucket.

Code of Federal Regulations, 2014 CFR

2014-10-01

... PROTECTION EQUIPMENT Additional Equipment § 181.610 Fire bucket. A vessel not required to have a power driven fire pump by § 181.300 must have at least three 9.5 liter (21/2 gallon) buckets, with an attached... 46 Shipping 7 2014-10-01 2014-10-01 false Fire bucket. 181.610 Section 181.610 Shipping COAST...

46 CFR 181.610 - Fire bucket.

Code of Federal Regulations, 2013 CFR

2013-10-01

... PROTECTION EQUIPMENT Additional Equipment § 181.610 Fire bucket. A vessel not required to have a power driven fire pump by § 181.300 must have at least three 9.5 liter (21/2 gallon) buckets, with an attached... 46 Shipping 7 2013-10-01 2013-10-01 false Fire bucket. 181.610 Section 181.610 Shipping COAST...

Turbine bucket natural frequency tuning rib

DOEpatents

Wang, John Zhiqiang; Norton, Paul Francis; Barb, Kevin Joseph; Jacala, Ariel Caesar-Prepena

2002-01-01

A tuning rib is added preferably in the aft cavity of a cored turbine bucket to alter the bucket's natural frequencies. The tuning rib may be a solid rib or a segmented rib and is particularly suited for altering high order frequency modes such as 2T, 4F and 1-3S. As such, detrimental crossings of natural bucket frequencies and gas turbine stimuli can be avoided to thereby improve the reliability of a gas turbine without impacting other features of the bucket that are important to the performance of the gas turbine.

Alaska Athabascan stellar astronomy

NASA Astrophysics Data System (ADS)

Cannon, Christopher M.

2014-01-01

Stellar astronomy is a fundamental component of Alaska Athabascan cultures that facilitates time-reckoning, navigation, weather forecasting, and cosmology. Evidence from the linguistic record suggests that a group of stars corresponding to the Big Dipper is the only widely attested constellation across the Northern Athabascan languages. However, instruction from expert Athabascan consultants shows that the correlation of these names with the Big Dipper is only partial. In Alaska Gwich'in, Ahtna, and Upper Tanana languages the Big Dipper is identified as one part of a much larger circumpolar humanoid constellation that spans more than 133 degrees across the sky. The Big Dipper is identified as a tail, while the other remaining asterisms within the humanoid constellation are named using other body part terms. The concept of a whole-sky humanoid constellation provides a single unifying system for mapping the night sky, and the reliance on body-part metaphors renders the system highly mnemonic. By recognizing one part of the constellation the stargazer is immediately able to identify the remaining parts based on an existing mental map of the human body. The circumpolar position of a whole-sky constellation yields a highly functional system that facilitates both navigation and time-reckoning in the subarctic. Northern Athabascan astronomy is not only much richer than previously described; it also provides evidence for a completely novel and previously undocumented way of conceptualizing the sky---one that is unique to the subarctic and uniquely adapted to northern cultures. The concept of a large humanoid constellation may be widespread across the entire subarctic and have great antiquity. In addition, the use of cognate body part terms describing asterisms within humanoid constellations is similarly found in Navajo, suggesting a common ancestor from which Northern and Southern Athabascan stellar naming strategies derived.

Nocturnal blood pressure dipping is similar in rheumatoid arthritis patients as compared to a normal population.

PubMed

Turgay Yildirim, O; Gonullu, E; Aydin, F; Aksit, E; Huseyinoglu Aydin, A; Dagtekin, E

2018-04-12

Rheumatoid arthritis (RA) is a systemic autoimmune inflammatory disorder which further doubles the risk of developing cardiovascular disease. Some studies suggest that in RA patients, the prevalence of hypertension increases due to prednisolone use, clinical status, genetic factors, and physical inactivity. On the other hand, dipper and non-dipper status in RA patients compared to non-RA subjects has not been investigated to our knowledge. Purpose of the study is to investigate whether non-dipper status is more deteriorated in RA patients. Sixty-five RA patients and 61 age-sex-matched control patients were evaluated in this cross-sectional study. Patients were classified according to 24-h ambulatory blood pressure monitoring results. Patients with previous hypertension diagnosis, coronary artery disease, and abnormal kidney function were excluded. Mean age of the study sample was 53.7 ± 12.3 years and 40.5% were male. There was no significant difference between groups in terms of basic demographic characteristics. Leukocyte counts (p = 0.001), neutrophil counts (p = 0.001), and red cell distribution width (p = 0.000) were significantly higher in the RA group. ABPM results indicate no significant difference between RA patients and the control group in terms of daytime systolic and diastolic blood pressure, nighttime systolic and diastolic blood pressure, and average systolic and diastolic blood pressure results (p > 0.05). There was no statistical difference regarding the non-dipper status of patient groups (p = 0.412). Nocturnal blood pressure dipping was significantly similar between groups (p = 0.980). In conclusion, RA patients have similar values in terms of nocturnal blood pressure dipping and hypertension diagnosis as compared to normal population.

Dietary sodium restriction restores nocturnal reduction of blood pressure in patients with primary aldosteronism.

PubMed

Takakuwa, Hiroshi; Shimizu, Kazuaki; Izumiya, Yoshiaki; Kato, Tamayo; Nakaya, Izaya; Yokoyama, Hitoshi; Kobayashi, Ken-ichi; Ise, Takuyuki

2002-09-01

The purpose of this study was to elucidate the effects of dietary sodium restriction on diurnal blood pressure (BP) variation in primary aldosteronism. We studied the diurnal variation in the systemic hemodynamic indices and in baroreflex sensitivity (BRS). In 13 subjects with aldosterone-producing adenomas (2 males; mean age, 39+/-2 years), intra-arterial pressure was monitored telemetrically on a normal salt diet (NaCl 10-12 g/day). Non-dippers were defined as those with a nocturnal reduction in systolic BP (SBP) of less than 10% of daytime SBP. Ten subjects showed a non-dipper pattern. Six of these "non-dippers" underwent repetitive hemodynamic studies on the last day of a 1-week low salt diet regimen (NaCl 2-4 g/day). Stroke volume was determined using Wesseling's pulse contour method, calibrated with indocyanine green dilution. BRS was calculated every 30 min as delta pulse interval/delta SBP on spontaneous variations. Nocturnal reduction of SBP was 4.1% on the normal salt diet. With sodium restriction, urinary sodium excretion decreased from 187+/-8 to 46+/-8 mmol/day, and body weight decreased from 57.9+/-2.1 to 56.6+/-1.9 kg. Night-time BP significantly decreased with dietary modification from 154+/-7/88+/-4 to 140+/-6/78+/-4 mmHg, whereas daytime BP was unaltered. With sodium restriction, cardiac index and stroke index decreased throughout the day. No significant difference was seen in either daytime or nighttime BRS between the two diets. We conclude that the non-dipper pattern is common in patients with an aldosterone-producing adenoma on a normal salt intake, and under such conditions, volume expansion appears to play a major role in the impairment of nocturnal BP reduction.

The effect of continuous nursing intervention guided by chronotherapeutics on ambulatory blood pressure of older hypertensive patients in the community.

PubMed

Cheng, Mei; Cheng, Shu-Ling; Zhang, Qing; Jiang, He; Cong, Ji-Yan; Zang, Xiao-Ying; Zhao, Yue

2014-08-01

To explore the effect of continuous nursing intervention guided by chronotherapeutics so as to provide the easy, noninvasive, effective and acceptable intervention for older hypertensive patients in the community. Many researchers studied the effect of administration at different times on blood pressure control and circadian rhythm. However, the individual administrative time was set ambiguously in previous studies. A semi-experimental study. In the study, 90 eligible patients were recruited and separated into three groups randomly, which were the control group, intervention group A (behaviour and chronotherapy intervention) and intervention group B (behaviour intervention). At 6 and 12 months after the study, the intervention groups were measured 24-hour ambulatory blood pressure monitoring. There were significant differences in ambulatory blood pressure monitoring parameters of the two intervention groups at different measurement times, and there were interaction between measurement time and different groups. The number of patients with dipper increased and reverse dipper decreased in group A as the intervention applied. There were statistical differences between two groups. The number of patients with morning surge in group A decreased more, and there were statistical differences between two groups at six months after the intervention. The behaviour and chronotherapy intervention based on the patients' ambulatory blood pressure monitoring can control casual blood pressure much better and last longer, which can also improve patients' indexes of ambulatory blood pressure monitoring better than behaviour intervention only. The behaviour and chronotherapy intervention can increase patients' nocturnal blood pressure drop, increase the number of patients with dipper and decrease reverse dipper, and improve blood pressure surge in the morning. Nurses can use continuous nursing intervention guided by chronotherapeutics to help improve hypertension of older patients better in the community. © 2014 John Wiley & Sons Ltd.

The effect of fixed-dose combination of valsartan and amlodipine on nighttime blood pressure in patients with non-dipper hypertension.

PubMed

Erdoğan, Doğan; İçli, Atilla; Aksoy, Fatih; Akçay, Salaheddin; Yücel, Habil; Ersoy, İbrahim; Özaydın, Mehmet

2016-07-01

Failure to decrease blood pressure (BP) during the night is associated with higher cardiovascular (CV) morbidity and mortality. There is strong evidence that fixed-dose combinations (FDCs) of antihypertensive agents are associated with significant improvement and non-significant adverse effects. The aim of the present study was to evaluate whether FDC affected nocturnal BP favorably in patients with uncontrolled, non-dipper hypertension (HT). All non-dipper hypertensives were either newly diagnosed with stage 2-3 HT or had HT uncontrolled with monotherapy. Patients (n=195) were consecutively assigned to 4 treatment groups: FDC of valsartan/amlodipine (160/5 mg), free-drug combination of valsartan 160 mg and amlodipine 5 mg, amlodipine 10 mg, and valsartan 320 mg. Ambulatory blood pressure monitoring (ABPM) was repeated at 4th and 8th week. Average 24-h (24-hour) and nocturnal BP were similar among the groups at baseline evaluation, and had significantly decreased by the fourth week of treatment. However, BP continued to decrease only slightly between the 4th and 8th weeks in the valsartan and amlodipine monotherapy groups, but continued to decrease significantly in both combination groups. After 4 weeks, day-night BP difference and day-night BP % change were significantly elevated in the combination and valsartan groups. Between the 4th and 8th weeks, however, day-night BP difference and day-night BP % change continued to rise only in the FDC group, nearly reducing to baseline levels in the free-drug combination and valsartan groups. An additional 2.2 mmHg decrease was observed in the FDC group, compared to the free-drug combination group. In non-dipper HT, FDC of valsartan and amlodipine improved diurnal-nocturnal ratio of BP and provided 24-h coverage.

Turbine system and adapter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hogberg, Nicholas Alvin; Garcia-Crespo, Andres Jose

A turbine system and adapter are disclosed. The adapter includes a turbine attachment portion having a first geometry arranged to receive a corresponding geometry of a wheelpost of a turbine rotor, and a bucket attachment portion having a second geometry arranged to receive a corresponding geometry of a root portion of a non-metallic turbine bucket. Another adapter includes a turbine attachment portion arranged to receive a plurality of wheelposts of a turbine rotor, and a bucket attachment portion arranged to receive a plurality of non-metallic turbine buckets having single dovetail configuration root portions. The turbine system includes a turbine rotormore » wheel configured to receive metal buckets, at least one adapter secured to at least one wheelpost on the turbine rotor wheel, and at least one non-metallic bucket secured to the at least one adapter.« less

Use of buckets as tools by Western lowland gorillas.

PubMed

Margulis, Susan W; Steele, Gary R; Kleinfelder, Raymond E

2012-01-01

While all great apes have been documented to use tools, gorillas are arguably the least proficient tool users. In 2009, a Western lowland gorilla (Gorilla gorilla gorilla) at the Buffalo Zoo was observed using a bucket, which had been provided as part of normal enrichment, as a tool to collect water. We conducted a brief, ad libitum investigation to confirm the validity of the initial observation. We then carried out a systematic investigation of the behavior in 2010. We collected 72 hr of videotaped data and tested the null hypothesis that the gorillas did not differ in their prevalence of engaging in bucket-use behaviors. We documented that all four adult gorillas in the group used buckets as drinking tools; however, there was significant individual variation in frequency and type of use of buckets. Four of the eight behaviors showed significant variation among individuals. The silverback male and the youngest adult female contacted and held the bucket significantly more than the remaining two adult females. The young female carried and drank from the bucket significantly more than any other individual. Furthermore, she was observed to fill the bucket with water four of the six times during which this behavior was observed. These data provide evidence of the ability of gorillas to utilize tools, given the appropriate environmental conditions. We continue to explore the abilities of gorillas to recognize the functionality of buckets as tools. © 2012 Wiley Periodicals, Inc.

SU-D-213AB-05: Commissioning a CT Compatible LDR T&O Applicator Using Analytical Calculation with ID and 3D Dosimetry.

PubMed

Adamson, J; Newton, J; Steffey, B; Cai, J; Adamovics, J; Oldham, M; Chino, J; Craciunescu, O

2012-06-01

To determine the characteristics of a new commercially available CT-compatible LDR Tandem and Ovoid (T&O) applicator using 3D dosimetry. We characterized source attenuation through the asymmetric gold shielding in the buckets by measuring dose with diode and 3D dosimetry and compared to an analytical line integral calculation. For 3D dosimetry, a cylindrical PRESAGE dosimeter (9.5cm diameter, 9.2cm height) with a central 6mm channel bored for source placement was scanned with the Duke Large field of view Optical CT-Scanner (DLOS) before and after delivering a nominal 7.7Gy at a distance of 1 cm using a Cs-137 source loaded in the bucket. The optical CT scan time lasted approximately 15 minutes during which 720 projections were acquired at 0.5° increments, anda 3D dose distribution was reconstructed with a 0.5mm 3 isotropic voxel size. The 3D dose distribution was applied to a CT-based T&O implant to determine effect of ovoid shielding on the dose delivered to ICRU 38 Point A as well as D2cc of the bladder, rectum, bowel, and sigmoid. Dose transmission through the gold shielding at a radial distance of 1-3cm from midplane of the source was 86.6%, 86.1, and 87.0% for analytical calculation, diode, and 3D dosimetry, respectively. For the gold shielding of the bucket, dose transmission calculated using the 3D dosimetrymeasurement was found to be lowest at oblique angles from the bucket witha minimum of ∼51%. For the patient case, attenuation from the buckets leadto a decrease in average Point A dose of ∼4% and decrease in D2cc to bladder, rectum, sigmoid, and bowel of 2%, 15%, 2%, and 7%, respectively. The measured 3D dose distribution provided unique insight to the dosimetry and shielding characteristics of the investigated applicator, the technique for which can be applied to commissioning of other brachytherapy applicators. John Adamovics is the owner of Heuris Pharma LLC. Partially supported by NIH Grant R01 CA100835-01. © 2012 American Association of Physicists in Medicine.

The effects of age and type of carrying task on lower extremity kinematics

PubMed Central

Gillette, Jason C.; Stevermer, Catherine A.; Miller, Ross H.; Meardon, Stacey A.; Schwab, Charles V.

2009-01-01

The purpose of this study was to determine the effects of age, load amount, and load symmetry on lower extremity kinematics during carrying tasks. Forty-two participants in four age groups (8-10 years, 12-14 years, 15-17 years, and adults) carried loads of 0%, 10%, and 20% body weight (BW) in large or small buckets unilaterally and bilaterally. Reflective markers were tracked to determine total joint ROM and maximum joint angles during the stance phase of walking. Maximum hip extension, hip adduction, and hip internal rotation angles were significantly greater for each of the child/adolescent age groups as compared to adults. In addition, maximum hip internal rotation angles significantly increased when carrying a 20% BW load. The observation that the 8-10 year old age group carried the lightest absolute loads and still displayed the highest maximum hip internal rotation angles suggests a particular necessity in setting carrying guidelines for the youngest children. PMID:20191410

Thin-walled reinforcement lattice structure for hollow CMC buckets

DOEpatents

de Diego, Peter

2017-06-27

A hollow ceramic matrix composite (CMC) turbine bucket with an internal reinforcement lattice structure has improved vibration properties and stiffness. The lattice structure is formed of thin-walled plies made of CMC. The wall structures are arranged and located according to high stress areas within the hollow bucket. After the melt infiltration process, the mandrels melt away, leaving the wall structure to become the internal lattice reinforcement structure of the bucket.

Numerical and Experimental Investigations of the Flow in a Stationary Pelton Bucket

NASA Astrophysics Data System (ADS)

Nakanishi, Yuji; Fujii, Tsuneaki; Kawaguchi, Sho

A numerical code based on one of mesh-free particle methods, a Moving-Particle Semi-implicit (MPS) Method has been used for the simulation of free surface flows in a bucket of Pelton turbines so far. In this study, the flow in a stationary bucket is investigated by MPS simulation and experiment to validate the numerical code. The free surface flow dependent on the angular position of the bucket and the corresponding pressure distribution on the bucket computed by the numerical code are compared with that obtained experimentally. The comparison shows that numerical code based on MPS method is useful as a tool to gain an insight into the free surface flows in Pelton turbines.

Improving the Quality of Welding Seam of Automatic Welding of Buckets Based on TCP

NASA Astrophysics Data System (ADS)

Hu, Min

2018-02-01

Since February 2014, the welding defects of the automatic welding line of buckets have been frequently appeared. The average repair time of each bucket is 26min, which seriously affects the production efficiency and welding quality. We conducted troubleshooting, and found the main reasons for the welding defects of the buckets were the deviations of the center points of the robot tools and the poor quality of the locating welding. We corrected the gripper, welding torch, and accuracy of repeat positioning of robots to control the quality of positioning welding. The welding defect rate of buckets was reduced greatly, ensuring the production efficiency and welding quality.

The use of knowledge-based Genetic Algorithm for starting time optimisation in a lot-bucket MRP

NASA Astrophysics Data System (ADS)

Ridwan, Muhammad; Purnomo, Andi

2016-01-01

In production planning, Material Requirement Planning (MRP) is usually developed based on time-bucket system, a period in the MRP is representing the time and usually weekly. MRP has been successfully implemented in Make To Stock (MTS) manufacturing, where production activity must be started before customer demand is received. However, to be implemented successfully in Make To Order (MTO) manufacturing, a modification is required on the conventional MRP in order to make it in line with the real situation. In MTO manufacturing, delivery schedule to the customers is defined strictly and must be fulfilled in order to increase customer satisfaction. On the other hand, company prefers to keep constant number of workers, hence production lot size should be constant as well. Since a bucket in conventional MRP system is representing time and usually weekly, hence, strict delivery schedule could not be accommodated. Fortunately, there is a modified time-bucket MRP system, called as lot-bucket MRP system that proposed by Casimir in 1999. In the lot-bucket MRP system, a bucket is representing a lot, and the lot size is preferably constant. The time to finish every lot could be varying depends on due date of lot. Starting time of a lot must be determined so that every lot has reasonable production time. So far there is no formal method to determine optimum starting time in the lot-bucket MRP system. Trial and error process usually used for it but some time, it causes several lots have very short production time and the lot-bucket MRP would be infeasible to be executed. This paper presents the use of Genetic Algorithm (GA) for optimisation of starting time in a lot-bucket MRP system. Even though GA is well known as powerful searching algorithm, however, improvement is still required in order to increase possibility of GA in finding optimum solution in shorter time. A knowledge-based system has been embedded in the proposed GA as the improvement effort, and it is proven that the improved GA has superior performance when used in solving a lot-bucket MRP problem.

30 CFR 56.19050 - Bucket requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personnel Hoisting Conveyances § 56.19050 Bucket requirements. Buckets used to hoist persons during vertical shaft sinking...

30 CFR 57.19050 - Bucket requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Personnel Hoisting Conveyances § 57.19050 Bucket requirements. Buckets used to hoist persons during vertical shaft sinking...

Buckets: Smart Objects for Digital Libraries

NASA Technical Reports Server (NTRS)

Nelson, Michael L.

2001-01-01

Current discussion of digital libraries (DLs) is often dominated by the merits of the respective storage, search and retrieval functionality of archives, repositories, search engines, search interfaces and database systems. While these technologies are necessary for information management, the information content is more important than the systems used for its storage and retrieval. Digital information should have the same long-term survivability prospects as traditional hardcopy information and should be protected to the extent possible from evolving search engine technologies and vendor vagaries in database management systems. Information content and information retrieval systems should progress on independent paths and make limited assumptions about the status or capabilities of the other. Digital information can achieve independence from archives and DL systems through the use of buckets. Buckets are an aggregative, intelligent construct for publishing in DLs. Buckets allow the decoupling of information content from information storage and retrieval. Buckets exist within the Smart Objects and Dumb Archives model for DLs in that many of the functionalities and responsibilities traditionally associated with archives are pushed down (making the archives dumber) into the buckets (making them smarter). Some of the responsibilities imbued to buckets are the enforcement of their terms and conditions, and maintenance and display of their contents.

Assessment of spill flow emissions on the basis of measured precipitation and waste water data

NASA Astrophysics Data System (ADS)

Hochedlinger, Martin; Gruber, Günter; Kainz, Harald

2005-09-01

Combined sewer overflows (CSOs) are substantial contributors to the total emissions into surface water bodies. The emitted pollution results from dry-weather waste water loads, surface runoff pollution and from the remobilisation of sewer deposits and sewer slime during storm events. One possibility to estimate overflow loads is a calculation with load quantification models. Input data for these models are pollution concentrations, e.g. Total Chemical Oxygen Demand (COD tot), Total Suspended Solids (TSS) or Soluble Chemical Oxygen Demand (COD sol), rainfall series and flow measurements for model calibration and validation. It is important for the result of overflow loads to model with reliable input data, otherwise this inevitably leads to bad results. In this paper the correction of precipitation measurements and the sewer online-measurements are presented to satisfy the load quantification model requirements already described. The main focus is on tipping bucket gauge measurements and their corrections. The results evidence the importance of their corrections due the effects on load quantification modelling and show the difference between corrected and not corrected data of storm events with high rain intensities.

46 CFR 181.610 - Fire bucket.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Fire bucket. 181.610 Section 181.610 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) FIRE PROTECTION EQUIPMENT Additional Equipment § 181.610 Fire bucket. A vessel not required to have a power driven...

62. VIEW OF FLAME BUCKET BELOW LAUNCHER ON SOUTH END ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

62. VIEW OF FLAME BUCKET BELOW LAUNCHER ON SOUTH END OF LAUNCH PAD. FIRE SUPPRESSION EQUIPMENT RIGHT OF FLAME BUCKET. SOUTH FACE OF MST IS IN BACKGROUND. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

23. VIEW DOWN INTO LAUNCHER AND FLAME BUCKET FROM STATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. VIEW DOWN INTO LAUNCHER AND FLAME BUCKET FROM STATION 48 IN SLC-3W MST. NOTE REMOVABLE METAL PLANKS BELOW LAUNCHER AND ROPE NET OVER FLAME BUCKET. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

The triple PCL sign: bucket handle tears of both medial and lateral menisci in a chronically ACL-deficient knee.

PubMed

Kakel, Rafid; Russell, Robert; VanHeerden, Pieter

2010-10-11

Bucket handle tears of both menisci in the setting of acute or chronic anterior cruciate ligament (ACL) tears of the same knee have rarely been reported in the literature. This article presents a case of a bucket handle tear affecting both the medial and lateral menisci in a patient with chronic ACL rupture. Both bucket handle tears were displaced and locked in the intercondylar notch. A new magnetic resonance image (MRI) sign suggested on sagittal view is called the triple PCL sign, comprising the intact posterior cruciate ligament (PCL) and the 2 displaced fragments in the intercondylar notch from the two bucket handle tears. The precise diagnosis of this condition is of obvious importance for optimal operative planning. While finding the displaced fragment from the medial meniscus is expected to cause the double PCL sign, the torn ACL may have made it easier to visualize the bucket handle tear of the lateral meniscus in the same sagittal plane as the PCL. Only 5 other reports mention bimeniscal bucket handle tears of both the medial and lateral menisci in association with an ACL tear. None have shown the suggested triple PCL sign because of lack of overlap between the 2 bucket handle tears in the coronal plane while lying in the intercondylar notch causing them not to fall in the same sagittal plane. Our patient showed some overlap between the 2 meniscal fragments while lying in the notch to create the triple PCL sign on sagittal MRI. Copyright 2010, SLACK Incorporated.

A note on the temporal behavior of bucket hydrologies

NASA Technical Reports Server (NTRS)

Suarez, M. J.

1984-01-01

The use of a "canopy' bucket to more accurately represent evapotranspiration over land surfaces is explained. The temporal behavior of the traditional bucket model is compared with one that mimics the effects of interception loss. Results are presented in terms of the spectral response of the parameterization to a hypothetical white noise forcing.

Compressive stress system for a gas turbine engine

DOEpatents

Hogberg, Nicholas Alvin

2015-03-24

The present application provides a compressive stress system for a gas turbine engine. The compressive stress system may include a first bucket attached to a rotor, a second bucket attached to the rotor, the first and the second buckets defining a shank pocket therebetween, and a compressive stress spring positioned within the shank pocket.

New fire-fighting water bucket is lifted by helicopter

NASA Technical Reports Server (NTRS)

2000-01-01

A NASA helicopter lifts a high-impact-resistant flexible plastic bucket that will be used for fire protection on property and buildings at Kennedy Space Center. Known as the 'Bambi' bucket, the 324-gallon container will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

Tubing vs. buckets: a cost comparison

Treesearch

Neil K. Huyler

1975-01-01

Equipment investment for tubing-vacuum systems was significantly less than that for bucket systems. Tubing-vacuum systems required about 22 percent less labor input, the major labor input being completed before sap-flow periods. Annual cost of operation was less for tubing-vacuum than the bucket system. Small tubing-vacuum operations showed more profit potential than...

New fire-fighting water bucket is readied for a demonstration

NASA Technical Reports Server (NTRS)

2000-01-01

Workers attach a high-impact-resistant flexible plastic bucket to a NASA helicopter. Holding 324 gallons of water, it will be used for fire protection on property and buildings at Kennedy Space Center. Known as the 'Bambi' bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

New fire-fighting water bucket is filled for demonstration

NASA Technical Reports Server (NTRS)

2000-01-01

- A NASA helicopter hovers over the water while a high-impact- resistant flexible plastic bucket fills. The 324-gallon container will be used for fire protection on property and buildings at Kennedy Space Center. Known as the 'Bambi' bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

New fire-fighting water bucket is lifted from water for a demonstration

NASA Technical Reports Server (NTRS)

2000-01-01

A NASA helicopter lifts a high-impact-resistant flexible plastic bucket filled with water. The container will be used for fire protection on property and buildings at Kennedy Space Center.. Known as the 'Bambi' bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

Automatic dispensing of liquid nitrogen in submilliliter doses

NASA Astrophysics Data System (ADS)

Milner, C. J.

1984-10-01

Well-controlled doses of 0.2 to 0.5 ml of liquid nitrogen are delivered, on electrical signal (not more than once per 5 s), as fills of a miniature bucket raised by an automatic hoist. The bucket is lifted, brimming, from the storage flask and then moved sideways until over the receiver. At this point, a steel ball, which has been resting in and sealing a drain hole in the bucket, is lifted from its seat by a magnet fixed alongside the (now descending) bucket. Design features are outlined: some alternative designs, valving liquid through a short drain tube fixed in the storage flask, are briefly reviewed. In tests the device delivered 74 g (approx. 260 doses) during 63 min, the loss by evaporation meanwhile being 11 g from the bucket, implying a transfer efficiency of 87%. An indirect measure indicated the dose sizes as 354±10 μl approximately.

Odors as cues for orientation to mothers by weanling Virginia opossums

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holmes, D.J.

1992-12-01

Three experiments were conducted to investigate whether whole-body and pouch odors facilitate social cohesion between young Virginia opossums and their mothers just prior to weaning. In experiment 1, young oriented toward plastic buckets containing their mothers, directing significantly higher levels of investigative behavior and more distress vocalizations toward them than toward buckets containing unrelated lactating females. In experiment 2, young oriented toward and investigated empty buckets containing whole-body odors of their mothers more than empty buckets containing odors of other females. Similarly, more investigative behavior was directed toward plastic bucket lids containing pouch odors from subjects mothers than toward pouchmore » odors from unrelated females in experiment 3. These results suggest that social odors help young didelphid marsupials maintain contact with their mothers, as in other mammals, and that whole-body and pouch gland odors are important chemical signals in this nongregarious species.« less

Ghost imaging with bucket detection and point detection

NASA Astrophysics Data System (ADS)

Zhang, De-Jian; Yin, Rao; Wang, Tong-Biao; Liao, Qing-Hua; Li, Hong-Guo; Liao, Qinghong; Liu, Jiang-Tao

2018-04-01

We experimentally investigate ghost imaging with bucket detection and point detection in which three types of illuminating sources are applied: (a) pseudo-thermal light source; (b) amplitude modulated true thermal light source; (c) amplitude modulated laser source. Experimental results show that the quality of ghost images reconstructed with true thermal light or laser beam is insensitive to the usage of bucket or point detector, however, the quality of ghost images reconstructed with pseudo-thermal light in bucket detector case is better than that in point detector case. Our theoretical analysis shows that the reason for this is due to the first order transverse coherence of the illuminating source.

Optimization of the Water Volume in the Buckets of Pico Hydro Overshot Waterwheel by Analytical Method

NASA Astrophysics Data System (ADS)

Budiarso; Adanta, Dendy; Warjito; Siswantara, A. I.; Saputra, Pradhana; Dianofitra, Reza

2018-03-01

Rapid economic and population growth in Indonesia lead to increased energy consumption, including electricity needs. Pico hydro is considered as the right solution because the cost of investment and operational cost are fairly low. Additionally, Indonesia has many remote areas with high hydro-energy potential. The overshot waterwheel is one of technology that is suitable to be applied in remote areas due to ease of operation and maintenance. This study attempts to optimize bucket dimensions with the available conditions. In addition, the optimization also has a good impact on the amount of generated power because all available energy is utilized maximally. Analytical method is used to evaluate the volume of water contained in bucket overshot waterwheel. In general, there are two stages performed. First, calculation of the volume of water contained in each active bucket is done. If the amount total of water contained is less than the available discharge in active bucket, recalculation at the width of the wheel is done. Second, calculation of the torque of each active bucket is done to determine the power output. As the result, the mechanical power generated from the waterwheel is 305 Watts with the efficiency value of 28%.

A discussion on turbine design for safe operation

NASA Astrophysics Data System (ADS)

Brekke, H.

2012-11-01

The paper gives a brief description of the hydraulic design of Francis and Pelton runners. The dynamic behaviour at part load has been a major problem for low head and medium head Francis turbines. The main reason for this has been inter blade separation and unstable swirl flow in the draft tube. A description is given on the hydraulic design of X-BLADE runners to obtain stable operation on the whole range of operation by reducing the cross flow. A classical theoretical analysis is also given on the dynamic hydraulic load on Pelton buckets. Several CFD analyses of this non stationary flow have been presented during the last decade, but the velocity distribution in the jets have not been correct. Experimental research work is presented on the complexity of this problem.

Forces acting on particles in a Pelton bucket and similarity considerations for erosion

NASA Astrophysics Data System (ADS)

Rai, A. K.; Kumar, A.; Staubli, T.

2016-11-01

High sediment transport rates cause severe erosion issues in hydropower plants leading to interruptions in power generation, decrease in efficiency and shutdown for repair and maintenance. For Pelton turbines operating at high head, the issue of erosion is severe, especially in components like buckets, nozzle rings and needles. Goal of the study is to develop erosion focussed guidelines for both designing as well as operating hydropower plants with Pelton runners. In this study, the flow of sediment inside a Pelton bucket with respect to forces acting on solid particles is analysed with an analytical approach by considering different dynamic forces originating from the rotation of the turbine, the curvature of the buckets, and the Coriolis effect. Further, the path of sediment particles and its effect on erosion phenomena are analysed based on the process of separation of different sized sediment particles from streamlines. The data relating to head, power, discharge, number of jet and efficiency of 250 hydropower plants installed all over the world were analysed in this study to find the major factors related to erosion in Pelton turbine bucket. From analysis of different force ratios, it is found that an increase of D/B, i.e. the ratio of pitch circle diameter and bucket width, and/or decrease of specific speed (nq) enhances erosion. As the erosion process depends significantly on nondimensional parameters D/B and nq, these are considered as similarity measures for scaling of the erosion process in the Pelton buckets of various sizes.

Development of Field Excavator with Embedded Force Measurement

NASA Technical Reports Server (NTRS)

Johnson, K.; Creager, C.; Izadnegahdar, A.; Bauman, S.; Gallo, C.; Abel, P.

2012-01-01

A semi-intelligent excavation mechanism was developed for use with the NASA-built Centaur 2 rover prototype. The excavator features a continuously rotatable large bucket supported between two parallel arms, both of which share a single pivot axis near the excavator base attached to the rover. The excavator is designed to simulate the collection of regolith, such as on the Moon, and to dump the collected soil into a hopper up to one meter tall for processing to extract oxygen. Because the vehicle can be autonomous and the terrain is generally unknown, there is risk of damaging equipment or using excessive power when attempting to extract soil from dense or rocky terrain. To minimize these risks, it is critical for the rover to sense the digging forces and adjust accordingly. It is also important to understand the digging capabilities and limitations of the excavator. This paper discusses the implementation of multiple strain gages as an embedded force measurement system in the excavator's arms. These strain gages can accurately measure and resolve multi-axial forces on the excavator. In order to validate these sensors and characterize the load capabilities, a series of controlled excavation tests were performed at Glenn Research Center with the excavator at various depths and cut angles while supported by a six axis load cell. The results of these tests are both compared to a force estimation model and used for calibration of the embedded strain gages. In addition, excavation forces generated using two different types of bucket edge (straight vs. with teeth) were compared.

Buoyancy prime mover

DOE Office of Scientific and Technical Information (OSTI.GOV)

Everett, T.D.

1982-12-14

A buoyancy prime mover that converts the potential energy of a gas buoyant within a liquid into rotating mechanical energy comprises a plurality of rigid or collapsible buckets joined by one or more chains with rotatable sprockets and shafts to form a continuous loop so that when the buoyant gas is trapped within the buckets, the buckets rise through the liquid and rotate the chain and sprockets to generate power.

New fire-fighting water bucket releases its water for a demonstration

NASA Technical Reports Server (NTRS)

2000-01-01

A NASA helicopter releases 324 gallons of water onto a building in a simulated fire control demonstration. The high-impact- resistant flexible plastic bucket will be used for fire protection on property and buildings at Kennedy Space Center. Known as the 'Bambi' bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

Fixing the Hole in My Bucket

ERIC Educational Resources Information Center

Nitkewicz, Edward J.

2011-01-01

Like many people, the author has spent the better part of his life fashioning a list of places he wanted to go and things he wanted to do. Because he is a typical American male, his "Bucket List" is mostly populated by sporting venues he wants to visit and sporting events he wants to witness. Sharing his "Bucket List" with his son would be a gift…

The absent bow tie sign in bucket-handle tears of the menisci in the knee.

PubMed

Helms, C A; Laorr, A; Cannon, W D

1998-01-01

Bucket-handle tears of the menisci are one of the most frequently missed diagnoses in MR examinations of the knee. This article describes the "absent bow tie sign," which can be used to identify bucket-handle tears on routine MR examinations of the knee. The arthroscopic surgical reports (n = 350) from a single orthopedic surgeon's practice during a 24-month period were examined for patients who had a diagnosis of bucket-handle tear and who underwent MR imaging before surgery (n = 32). The MR examinations were retrospectively evaluated for the presence of a bow tie sign. The bow tie sign was considered normal when two sagittal images showed the body segment (a bow tie appearance). The bow tie sign was considered abnormal, consistent with a bucket-handle tear, when only one or no body segment was seen (the absent bow tie sign). Coronal images were evaluated for a truncated meniscus. Also, each MR examination was scrutinized for a displaced fragment and a double posterior cruciate ligament (PCL) sign. Thirty-three bucket-handle tears were found at arthroscopy in 32 patients. One patient had tears of the medial and lateral menisci. The absent bow tie sign was seen in 32 of the 33 cases (sensitivity, 97%) and correlated with the medial or lateral meniscus that was reported torn at arthroscopy. The single false-negative result occurred in a patient with a nondisplaced bucket-handle tear. The findings in 31 contralateral normal menisci were all negative for an absent bow tie sign (specificity, 100%). A displaced fragment was found in 30 (94%) of 32 cases. The coronal images showed a truncated meniscus in 21 (64%) of 33 cases. A double PCL sign was seen in 10 (30%) of 33 cases. The absent bow tie sign is an easily applied finding that can be used with good sensitivity to diagnose bucket-handle tears of the menisci on MR imaging. This sign has a higher accuracy rate than other findings common with bucket-handle tears, such as displaced fragments, a truncated appearance of the meniscus on coronal images, and the double PCL sign.

Determination of functions of controlling drives of main executive mechanisms of mining excavators

NASA Astrophysics Data System (ADS)

Lagunova, Yu A.; Komissarov, A. P.; Lukashuk, O. A.

2018-03-01

It is shown that a special shovel is a feature of the structure of the drives of the main mechanisms (mechanisms of lifting and pressure) of career excavators with working equipment, the presence in the transfer device of a two-crank-lever mechanism of working equipment that connects the main mechanisms with the working body (bucket). In this case, the transformation of the mechanical energy parameters of the motors into energy-force parameters realized at the cutting edge of the bucket (teeth) takes place depending on the type of the kinematic scheme of the two-link-lever mechanism. The concept of “control function” defining the relationship between the parameters characterizing the position of the bucket in the face (the coordinates of the tip of the cutting edge of the bucket, the digging speed) and the required control level are introduced. These are the values of the lifting and head speeds ensuring the bucket movement along a given trajectory.

Electromyographic assessment of apple bucket intervention designed to reduce back strain.

PubMed

Earle-Richardson, Giulia; Jenkins, Paul L; Strogatz, David; Bell, Erin M; Freivalds, Andris; Sorensen, Julie A; May, John J

2008-06-01

The authors previously developed an apple bucket that was modified by use of a hip belt to reduce muscle fatigue. The intervention of belt use was accepted by workers and shown not to interfere with productivity. However, use of this intervention did not appear to reduce muscle fatigue when measured by tests of voluntary muscle strength. The purpose of the present study was to evaluate the intervention's effect on muscle fatigue employing surface electromyographic (EMG) amplitude. Amplitude measurements on 15 muscles were taken from 10 laboratory volunteers who were carrying a full bucket of apples, once while wearing the intervention belt and once without the intervention. These measurements were taken for seven different postures (four angles of trunk flexion (0 degrees , 20 degrees , 45 degrees , 90 degrees ) and three raised-arm positions (both up, dominant up, non-dominant up)) common to apple harvest work. Participants were measured in these conditions both with the bucket carried in front and with the bucket carried to the side. Significant reductions in amplitude favouring the intervention were seen for 11 of the 15 muscles in models considering the four body flexion angles. Ten of these were of the middle and lower back. These control/intervention differences were seen with both bucket-carrying positions (front vs. side) and tended to increase with increasing flexion angle. In contrast, no significant intervention effects were observed in models considering treatment by arm-raised position. One significant main effect (upper trapezius, side bucket) showed an amplitude reduction in the treatment condition. Another main effect showing increased amplitude in the intervention condition use was observed in the dominant levator scapulae (side bucket). Thus, the use of the intervention belt reduces EMG amplitude among a number of mid- and lower-back muscles. This is suggestive of a protective effect against back strain.

CAD-based strength analysis of EK-18 excavator bucket construction for mounting of anti-adhesive devices

NASA Astrophysics Data System (ADS)

Zenkov, S. A.; Lobanov, D. V.

2018-03-01

3D rigid-body model of a bucket of power shovel EK-18 was built using modern CAD-software. Tetrahedral grid with 10-node second-order elements was chosen, and the given model was imported to APM WinMachine - model preparation preprocessor for finite element analysis. The finite element model was based on the geometrical model, imported from KOMPAS-3D to APM Studio. Calculation of stressed-strained state of the bucket was carried out under the forces emerging while digging with “back hoe” equipment. Shift, deformation and tension charts were planned and the most and the least strained areas were pointed out. Wet coherent soil excavation deals with soil adhesion to working bodies of power shovels and leads to reduced performance. The performance decrease is caused by a reduction of useful bucket capacity and partial unloading, increased front resistance to cutting (digging) caused by wet soil adhesion to a working body, increased bucket entry resistance, increased idle time caused by necessity to clean working bodies. Also energy losses increase and quality of work drops because friction forces go up. Friction force occurs while digging and levelling account for 30…70 percent of total digging resistance while performance decreases 1.2…2 times and more. Vibrothermal exposure creates new technological effect which involves a wider humidity range of efficient application and a reduction of friction forces. Disintegrating adhesion bonds with heating requires less driving force from the vibrator. Vibration boosts up heating of the contact layer, which reduces thermal energy losses. However, the question of piezoelectric ceramic actuators location on the excavator bucket needs to be dealt with. The most suitable spots for mounting piezoelectric ceramic devices for reducing soil adhesion to the excavator bucket were defined. Their efficiency is derived from combined (vibrothermal) methods of exposure. Such devices eliminates soil adhesion to the bucket and increases efficiency of using power shovels with wet coherent soils.

Short-Wavelength Infrared Views of Messier 81

NASA Image and Video Library

2003-12-18

The magnificent spiral arms of the nearby galaxy Messier 81 are highlighted in this NASA Spitzer Space Telescope image. Located in the northern constellation of Ursa Major which also includes the Big Dipper.

Night-time heart rate nondipping: clinical and prognostic significance in the general population.

PubMed

Cuspidi, Cesare; Facchetti, Rita; Bombelli, Michele; Sala, Carla; Tadic, Marijana; Grassi, Guido; Mancia, Giuseppe

2018-06-01

Studies addressing the association between a reduced drop of heart rate (HR) at night with subclinical organ damage and cardiovascular events in the general population are scanty. We evaluated this issue in individuals enrolled in the Pressioni Monitorate E Loro Associazioni study. At entry, 2021 individuals underwent diagnostic tests including laboratory investigations, 24-h ambulatory blood pressure (BP) monitoring and echocardiography. Participants were followed from the initial medical visit for a time interval of 148 ± 27 months. To explore the association of circadian HR rhythm and outcomes, participants were classified in the primary analysis according to quartiles of nocturnal HR decrease. In secondary analyses, the population was also classified according nondipping nocturnal HR (defined as a drop in average HR at night lower than 10% compared with day-time values) and next in four categories: first, BP/HR dipper, second, BP/HR nondipper, third, HR dipper/BP nondipper, fourth, HR nondipper/BP dipper). A flattened circadian HR rhythm (i.e. lowest quartile of night-time HR dip) was independently associated with left atrial enlargement, but not to left ventricular hypertrophy; moreover, it was predictive of fatal and nonfatal cardiovascular events, independently of several confounders (hazard ratio 1.8, confidence interval: 1.13-2.86, P < 0.01 vs. highest quartile). A blunted dipping of nocturnal HR is associated with preclinical cardiac damage in terms of left atrial enlargement and is predictive cardiovascular morbidity and mortality in the general population.

Cooling circuit for a gas turbine bucket and tip shroud

DOEpatents

Willett, Fred Thomas; Itzel, Gary Michael; Stathopoulos, Dimitrios; Plemmons, Larry Wayne; Plemmons, Helen M.; Lewis, Doyle C.

2002-01-01

An open cooling circuit for a gas turbine bucket wherein the bucket has an airfoil portion, and a tip shroud, the cooling circuit including a plurality of radial cooling holes extending through the airfoil portion and communicating with an enlarged internal area within the tip shroud before exiting the tip shroud such that a cooling medium used to cool the airfoil portion is subsequently used to cool the tip shroud.

Second-stage turbine bucket airfoil

DOEpatents

Wang, John Zhiqiang; By, Robert Romany; Sims, Calvin L.; Hyde, Susan Marie

2002-01-01

The second-stage buckets have airfoil profiles substantially in accordance with Cartesian coordinate values of X, Y and Z set forth in inches in Table I wherein Z is a perpendicular distance from a plane normal to a radius of the turbine centerline and containing the X and Y values with the Z value commencing at zero in the X, Y plane at the radially innermost aerodynamic section of the airfoil and X and Y are coordinate values defining the airfoil profile at each distance Z. The X and Y values may be scaled as a function of the same constant or number to provide a scaled-up or scaled-down airfoil section for the bucket. The second-stage wheel has sixty buckets.

Removable inner turbine shell with bucket tip clearance control

DOEpatents

Sexton, Brendan F.; Knuijt, Hans M.; Eldrid, Sacheverel Q.; Myers, Albert; Coneybeer, Kyle E.; Johnson, David Martin; Kellock, Iain R.

2000-01-01

A turbine includes a plurality of inner shell sections mounting first and second stage nozzle and shroud portions. The inner shell sections are pinned to an outer containment shell formed of sections to preclude circumferential movement of the inner shell relative to the outer shell and enable thermal expansion and contraction of the inner shell relative to the outer shell. Positive bucket tip clearance control is afforded by passing a thermal medium about the inner shell in heat transfer relation with the shrouds about the first and second stage bucket tips, the thermal medium being provided from a source of heating/cooling fluid independent of the turbine. Access is provided to the rotor and turbine buckets by removing the outer and inner shell sections.

77 FR 51561 - Notice of Temporary Restriction Order for Skinny Dipper Hot Springs, Boise County, ID

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-24

..., which creates the potential for environmental contamination. Many secondary effects associated with the primary activities are causing direct resource harm. These impacts include trash (glass, cans, food...

Preserving the Pyramid of STI Using Buckets

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt

2004-01-01

The product of research projects is information. Through the life cycle of a project, information comes from many sources and takes many forms. Traditionally, this body of information is summarized in a formal publication, typically a journal article. While formal publications enjoy the benefits of peer review and technical editing, they are also often compromises in media format and length. As such, we consider a formal publication to represent an abstract to a larger body of work: a pyramid of scientific and technical information (STI). While this abstract may be sufficient for some applications, an in-depth use or analysis is likely to require the supporting layers from the pyramid. We have developed buckets to preserve this pyramid of STI. Buckets provide an archive- and protocol-independent container construct in which all related information objects can be logically grouped together, archived, and manipulated as a single object. Furthermore, buckets are active archival objects and can communicate with each other, people, or arbitrary network services. Buckets are an implementation of the Smart Object, Dumb Archive (SODA) DL model. In SODA, data objects are more important than the archives that hold them. Much of the functionality traditionally associated with archives is pushed down into the objects, such as enforcing terms and conditions, negotiating display, and content maintenance. In this paper, we discuss the motivation, design, and implication of bucket use in DLs with respect to grey literature.

Teflon-wire piston or stainless-steel bucket stapes prosthesis: does it make a difference?

PubMed

Farrior, J B; Temple, A E

1999-04-01

The goal of this study was to determine whether postoperative (implantation of a stapes prosthesis) hearing gain and the amount of air-bone gap overclosure are more improved with the Teflon-wire piston or with the stainless-steel bucket prosthesis. We retrospectively reviewed the outcomes of 82 surgeries that had been performed by the primary author; 41 of these patients had received a Fisch Teflon-wire piston, and 41 had received a Bailey-modified Robinson stainless-steel bucket prosthesis. The mean hearing gain for the patients who received the Teflon-wire piston was 23.3 dB after primary stapes surgery and 20.5 dB after revision surgery. Patients who received the stainless-steel bucket prosthesis experienced a mean hearing gain of 20.7 and 20.3 dB, respectively. Following primary stapes surgery, the air-bone gap overclosure was 4.4 dB with the Teflon-wire piston and 5.2 dB with the stainless-steel bucket prosthesis. There was no statistically significant difference in either hearing gain or air-bone gap overclosure between the two prostheses.

Numerical simulation of unsteady free surface flow and dynamic performance for a Pelton turbine

NASA Astrophysics Data System (ADS)

Xiao, Y. X.; Cui, T.; Wang, Z. W.; Yan, Z. G.

2012-11-01

Different from the reaction turbines, the hydraulic performance of the Pelton turbine is dynamic due to the unsteady free surface flow in the rotating buckets in time and space. This paper aims to present the results of investigations conducted on the free surface flow in a Pelton turbine rotating buckets. The unsteady numerical simulations were performed with the CFX code by using the Realizable k-ε turbulence model coupling the two-phase flow volume of fluid method. The unsteady free surface flow patterns and torque varying with the bucket rotating were analysed. The predicted relative performance at five operating conditions was compared with the field test results. The study was also conducted the interactions between the bucket rear and the water jet.

KSC-2014-4218

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, 23-foot cables used to hold a Bambi Bucket are checked out prior to a training exercise to practice firefighting techniques. A three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4217

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, helicopter crew chief Mark Smith, of URS Federal Technical Services Inc., checks out a Bambi Bucket prior to a training exercise to practice firefighting techniques. A three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

Commissioning a CT-compatible LDR tandem and ovoid applicator using Monte Carlo calculation and 3D dosimetry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adamson, Justus; Newton, Joseph; Yang Yun

2012-07-15

Purpose: To determine the geometric and dose attenuation characteristics of a new commercially available CT-compatible LDR tandem and ovoid (T and O) applicator using Monte Carlo calculation and 3D dosimetry. Methods: For geometric characterization, we quantified physical dimensions and investigated a systematic difference found to exist between nominal ovoid angle and the angle at which the afterloading buckets fall within the ovoid. For dosimetric characterization, we determined source attenuation through asymmetric gold shielding in the buckets using Monte Carlo simulations and 3D dosimetry. Monte Carlo code MCNP5 was used to simulate 1.5 Multiplication-Sign 10{sup 9} photon histories from a {supmore » 137}Cs source placed in the bucket to achieve statistical uncertainty of 1% at a 6 cm distance. For 3D dosimetry, the distribution about an unshielded source was first measured to evaluate the system for {sup 137}Cs, after which the distribution was measured about sources placed in each bucket. Cylindrical PRESAGE{sup Registered-Sign} dosimeters (9.5 cm diameter, 9.2 cm height) with a central channel bored for source placement were supplied by Heuris Inc. The dosimeters were scanned with the Duke Large field of view Optical CT-Scanner before and after delivering a nominal dose at 1 cm of 5-8 Gy. During irradiation the dosimeter was placed in a water phantom to provide backscatter. Optical CT scan time lasted 15 min during which 720 projections were acquired at 0.5 Degree-Sign increments, and a 3D distribution was reconstructed with a (0.05 cm){sup 3} isotropic voxel size. The distributions about the buckets were used to calculate a 3D distribution of transmission rate through the bucket, which was applied to a clinical CT-based T and O implant plan. Results: The systematic difference in bucket angle relative to the nominal ovoid angle (105 Degree-Sign ) was 3.1 Degree-Sign -4.7 Degree-Sign . A systematic difference in bucket angle of 1 Degree-Sign , 5 Degree-Sign , and 10 Degree-Sign caused a 1%{+-} 0.1%, 1.7%{+-} 0.4%, and 2.6%{+-} 0.7% increase in rectal dose, respectively, with smaller effect to dose to Point A, bladder, sigmoid, and bowel. For 3D dosimetry, 90.6% of voxels had a 3D {gamma}-index (criteria = 0.1 cm, 3% local signal) below 1.0 when comparing measured and expected dose about the unshielded source. Dose transmission through the gold shielding at a radial distance of 1 cm was 85.9%{+-} 0.2%, 83.4%{+-} 0.7%, and 82.5%{+-} 2.2% for Monte Carlo, and measurement for left and right buckets, respectively. Dose transmission was lowest at oblique angles from the bucket with a minimum of 56.7%{+-} 0.8%, 65.6%{+-} 1.7%, and 57.5%{+-} 1.6%, respectively. For a clinical T and O plan, attenuation from the buckets leads to a decrease in average Point A dose of {approx}3.2% and decrease in D{sub 2cc} to bladder, rectum, bowel, and sigmoid of 5%, 18%, 6%, and 12%, respectively. Conclusions: Differences between dummy and afterloading bucket position in the ovoids is minor compared to effects from asymmetric ovoid shielding, for which rectal dose is most affected. 3D dosimetry can fulfill a novel role in verifying Monte Carlo calculations of complex dose distributions as are common about brachytherapy sources and applicators.« less

Commissioning a CT-compatible LDR tandem and ovoid applicator using Monte Carlo calculation and 3D dosimetry.

PubMed

Adamson, Justus; Newton, Joseph; Yang, Yun; Steffey, Beverly; Cai, Jing; Adamovics, John; Oldham, Mark; Chino, Junzo; Craciunescu, Oana

2012-07-01

To determine the geometric and dose attenuation characteristics of a new commercially available CT-compatible LDR tandem and ovoid (T&O) applicator using Monte Carlo calculation and 3D dosimetry. For geometric characterization, we quantified physical dimensions and investigated a systematic difference found to exist between nominal ovoid angle and the angle at which the afterloading buckets fall within the ovoid. For dosimetric characterization, we determined source attenuation through asymmetric gold shielding in the buckets using Monte Carlo simulations and 3D dosimetry. Monte Carlo code MCNP5 was used to simulate 1.5 × 10(9) photon histories from a (137)Cs source placed in the bucket to achieve statistical uncertainty of 1% at a 6 cm distance. For 3D dosimetry, the distribution about an unshielded source was first measured to evaluate the system for (137)Cs, after which the distribution was measured about sources placed in each bucket. Cylindrical PRESAGE(®) dosimeters (9.5 cm diameter, 9.2 cm height) with a central channel bored for source placement were supplied by Heuris Inc. The dosimeters were scanned with the Duke Large field of view Optical CT-Scanner before and after delivering a nominal dose at 1 cm of 5-8 Gy. During irradiation the dosimeter was placed in a water phantom to provide backscatter. Optical CT scan time lasted 15 min during which 720 projections were acquired at 0.5° increments, and a 3D distribution was reconstructed with a (0.05 cm)(3) isotropic voxel size. The distributions about the buckets were used to calculate a 3D distribution of transmission rate through the bucket, which was applied to a clinical CT-based T&O implant plan. The systematic difference in bucket angle relative to the nominal ovoid angle (105°) was 3.1°-4.7°. A systematic difference in bucket angle of 1°, 5°, and 10° caused a 1% ± 0.1%, 1.7% ± 0.4%, and 2.6% ± 0.7% increase in rectal dose, respectively, with smaller effect to dose to Point A, bladder, sigmoid, and bowel. For 3D dosimetry, 90.6% of voxels had a 3D γ-index (criteria = 0.1 cm, 3% local signal) below 1.0 when comparing measured and expected dose about the unshielded source. Dose transmission through the gold shielding at a radial distance of 1 cm was 85.9% ± 0.2%, 83.4% ± 0.7%, and 82.5% ± 2.2% for Monte Carlo, and measurement for left and right buckets, respectively. Dose transmission was lowest at oblique angles from the bucket with a minimum of 56.7% ± 0.8%, 65.6% ± 1.7%, and 57.5% ± 1.6%, respectively. For a clinical T&O plan, attenuation from the buckets leads to a decrease in average Point A dose of ∼3.2% and decrease in D(2cc) to bladder, rectum, bowel, and sigmoid of 5%, 18%, 6%, and 12%, respectively. Differences between dummy and afterloading bucket position in the ovoids is minor compared to effects from asymmetric ovoid shielding, for which rectal dose is most affected. 3D dosimetry can fulfill a novel role in verifying Monte Carlo calculations of complex dose distributions as are common about brachytherapy sources and applicators.

Gas turbine bucket wall thickness control

DOEpatents

Stathopoulos, Dimitrios; Xu, Liming; Lewis, Doyle C.

2002-01-01

A core for use in casting a turbine bucket including serpentine cooling passages is divided into two pieces including a leading edge core section and a trailing edge core section. Wall thicknesses at the leading edge and the trailing edge of the turbine bucket can be controlled independent of each other by separately positioning the leading edge core section and the trailing edge core section in the casting die. The controlled leading and trailing edge thicknesses can thus be optimized for efficient cooling, resulting in more efficient turbine operation.

76 FR 795 - Notice of Inventory Completion for Native American Human Remains and Associated Funerary Objects...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-06

... shell ornaments, 2 shells, 37 shell beads, 1 shell pendant, 1 shell dipper, 4 stone tools, 2 stone... (Dania, Big Cypress, Brighton, Hollywood & Tampa Reservations); Shawnee Tribe, Oklahoma; Thlopthlocco...

An ancient eye test--using the stars.

PubMed

Bohigian, George M

2008-01-01

Vision testing in ancient times was as important as it is today. The predominant vision testing in some cultures was the recognition and identification of constellations and celestial bodies of the night sky. A common ancient naked eye test used the double star of the Big Dipper in the constellation Ursa Major or the Big Bear. The second star from the end of the handle of the Big Dipper is an optical double star. The ability to perceive this separation of these two stars, Mizar and Alcor, was considered a test of good vision and was called the "test" or presently the Arab Eye Test. This article is the first report of the correlation of this ancient eye test to the 20/20 line in the current Snellen visual acuity test. This article describes the astronomy, origin, history, and the practicality of this test and how it correlates with the present day Snellen visual acuity test.

The rapid return of marine-derived nutrients to a freshwater food web following dam removal

USGS Publications Warehouse

Tonra, Christopher M; Sager-Fradkin, Kimberly A.; Morley, Sarah A; Duda, Jeff; Marra, Peter P.

2015-01-01

Dam removal is increasingly being recognized as a viable river restoration action. Although the main beneficiaries of restored connectivity are often migratory fish populations, little is known regarding recovery of other parts of the freshwater food web, particularly terrestrial components. We measured stable isotopes in key components to the freshwater food web: salmon, freshwater macroinvertebrates and a river specialist bird, American dipper (Cinclus mexicanus), before and after removal of the Elwha Dam, WA, USA. Less than a year after dam removal, salmon returned to the system and released marine-derived nutrients (MDN). In that same year we documented an increase in stable-nitrogen and carbon isotope ratios in American dippers. These results indicate that MDN from anadromous fish, an important nutrient subsidy that crosses the aquatic–terrestrial boundary, can return rapidly to food webs after dams are removed which is an important component of ecosystem recovery.

KSC-2014-4220

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, John Miller of URS Federal Technical Services moves a Bambi Bucket and its associated cables are moved outside the Shuttle Landing Facility hangar prior to a training exercise to practice firefighting techniques. A three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

Computational analysis of Pelton bucket tip erosion using digital image processing

NASA Astrophysics Data System (ADS)

Shrestha, Bim Prasad; Gautam, Bijaya; Bajracharya, Tri Ratna

2008-03-01

Erosion of hydro turbine components through sand laden river is one of the biggest problems in Himalayas. Even with sediment trapping systems, complete removal of fine sediment from water is impossible and uneconomical; hence most of the turbine components in Himalayan Rivers are exposed to sand laden water and subject to erode. Pelton bucket which are being wildly used in different hydropower generation plant undergoes erosion on the continuous presence of sand particles in water. The subsequent erosion causes increase in splitter thickness, which is supposed to be theoretically zero. This increase in splitter thickness gives rise to back hitting of water followed by decrease in turbine efficiency. This paper describes the process of measurement of sharp edges like bucket tip using digital image processing. Image of each bucket is captured and allowed to run for 72 hours; sand concentration in water hitting the bucket is closely controlled and monitored. Later, the image of the test bucket is taken in the same condition. The process is repeated for 10 times. In this paper digital image processing which encompasses processes that performs image enhancement in both spatial and frequency domain. In addition, the processes that extract attributes from images, up to and including the measurement of splitter's tip. Processing of image has been done in MATLAB 6.5 platform. The result shows that quantitative measurement of edge erosion of sharp edges could accurately be detected and the erosion profile could be generated using image processing technique.

A comparative assessment of R. M. Young and tipping bucket rain gauges

NASA Technical Reports Server (NTRS)

Goldhirsh, Julius; Gebo, Norman E.

1992-01-01

Rain rates as derived from standard tipping bucket rain gauges have variable integration times corresponding to the interval between bucket tips. For example, the integration time for the Weathertronics rain gauge is given by delta(T) = 15.24/R (min), where R is the rain rate expressed in mm/h and delta(T) is the time between tips expressed in minutes. It is apparent that a rain rate of 1 mm/h has an integration time in excess of 15 minutes. Rain rates larger than 15.24 mm/h will have integration times smaller than 1 minute. The integration time is dictated by the time it takes to fill a small tipping bucket where each tip gives rise to 0.254 mm of rainfall. Hence, a uniform rain rate of 1 mm/h over a 15 minute period will give rise to the same rain rate as 0 mm/h rainfall over the first 14 minutes and 15 mm/h between 14 to 15 minutes from the reference tip. Hence, the rain intensity fluctuations may not be captured with the tipping bucket rain gauge for highly variable rates encompassing lower and higher values over a given integration time. The objective of this effort is to provide an assessment of the features of the R. M. Young capacitive gauge and to compare these features with those of the standard tipping bucket rain gauge. A number of rain rate-time series derived from measurements with approximately co-located gauges are examined.

Personality traits and circadian blood pressure patterns: A seven year prospective study

PubMed Central

Terracciano, Antonio; Strait, James; Scuteri, Angelo; Meirelles, Osorio; Sutin, Angelina R.; Tarasov, Kirill; Ding, Jun; Marongiu, Michele; Orru, Marco; Pilia, Maria Grazia; Cucca, Francesco; Lakatta, Edward; Schlessinger, David

2014-01-01

Objective A nighttime dip in blood pressure is associated with decreased risk of cardiovascular morbidity and mortality. We examined whether personality traits predict nighttime dipping blood pressure. Methods A community-based sample of 2,848 adults from Sardinia (Italy) completed the Revised NEO Personality Inventory and 7.34-years later (SD=0.87) were examined with 24-hour ambulatory blood pressure monitoring. The primary analyses examined the associations of personality traits with continuous and categorical measures of mean arterial, systolic and diastolic blood pressure nighttime dipping. Results Agreeableness and conscientiousness were associated with more nocturnal blood pressure dipping (β = .05, p=.025 and β = .07, p<.001, respectively) and lower systolic blood pressure at night (β = -.045, p=.018 and β = -.032; p=.072, respectively). Non-dippers were particularly more impulsive (p=.009), less trusting (p=.004), and less self-disciplined (p=.001), but there was no significant association between nocturnal dipping blood pressure and trait anxiety (p=.78) or depression (p=.59). The associations were stronger when comparing extreme dippers (nighttime drop ≥ 20%) to reverse dippers (nighttime increase in blood pressure). Indeed, scoring 1 SD higher on conscientiousness was associated with about 40% reduced risk of reverse dipping (OR = 1.43, CI = 1.08-1.91). Conclusions We found evidence that reduced nighttime blood pressure dipping is associated with antagonism and impulsivity related traits but not with measures of emotional vulnerability. The strongest associations were found with conscientiousness, a trait that may have broad impact on cardiovascular health. PMID:24608035

Riser pattern is a predictor of kidney mortality among patients with chronic kidney disease.

PubMed

Nakai, Kentaro; Fujii, Hideki; Watanabe, Kentaro; Watanabe, Shuhei; Awata, Rie; Kono, Keiji; Yonekura, Yuriko; Goto, Shunsuke; Nishi, Shinichi

Hypertension is a crucial risk factor for cardiovascular death and loss of residual kidney function. Absence of the nocturnal decline in blood pressure (BP) predicts cardiovascular events and poor prognosis. However, characteristics of hypertension in moderate-to-severe chronic kidney disease (CKD) have not been fully evaluated. We aimed to assess the circadian variation of BP and kidney survival in CKD patients. Patients who were examined by 24-h ambulatory BP monitoring (ABPM) and estimated glomerular filtration rate (eGFR), <45 ml/min/1.73 m(2), were enrolled in the study. The impacts of BP circadian rhythm and brain natriuretic peptide (BNP) on kidney survival were evaluated. A total of 124 patients were enrolled. The average age was 64 ± 14 years, 57% were male, and 43% had diabetes. Forty-five percent of patients had a non-dipper pattern, 35% had a riser pattern, 19% had a dipper pattern, and 1% had an extreme-dipper pattern. The prevalence of diabetes and plasma BNP levels was higher and eGFR was lower in the riser-pattern group than in the non-riser-pattern group. Kidney survival rates were significantly worse in the riser-pattern group than in the non-riser-pattern group (p < 0.05). Moreover, among riser and non-riser pattern groups divided by BNP levels, the riser group with higher BNP level showed the worst kidney survival (p < 0.05). The riser pattern is frequently associated with several conditions at higher risk for kidney survival. Patients with a rising pattern and higher BNP levels have a worse kidney prognosis.

Hydro-abrasive erosion on coated Pelton runners: Partial calibration of the IEC model based on measurements in HPP Fieschertal

NASA Astrophysics Data System (ADS)

Felix, D.; Abgottspon, A.; Albayrak, I.; Boes, R. M.

2016-11-01

At medium- and high-head hydropower plants (HPPs) on sediment-laden rivers, hydro-abrasive erosion on hydraulic turbines is a major economic issue. For optimization of such HPPs, there is an interest in equations to predict erosion depths. Such a semi-empirical equation suitable for engineering practice is proposed in the relevant guideline of the International Electrotechnical Commission (IEC 62364). However, for Pelton turbines no numerical values of the model's calibration parameters have been available yet. In the scope of a research project at the high-head HPP Fieschertal, Switzerland, the particle load and the erosion on the buckets of two hard-coated 32 MW-Pelton runners have been measured since 2012. Based on three years of field data, the numerical values of a group of calibration parameters of the IEC erosion model were determined for five application cases: (i) reduction of splitter height, (ii) increase of splitter width and (iii) increase of cut-out depth due to erosion of mainly base material, as well as erosion of coating on (iv) the splitter crests and (v) inside the buckets. Further laboratory and field investigations are recommended to quantify the effects of individual parameters as well as to improve, generalize and validate erosion models for uncoated and coated Pelton turbines.

TRANSIENT BEAM LOADING EFFECTS IN RF SYSTEMS IN JLEIC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Haipeng; Guo, Jiquan; Rimmer, Robert A.

2016-05-01

The pulsed electron bunch trains generated from the Continuous Electron Beam Accelerator Facility (CEBAF) linac to inject into the proposed Jefferson Lab Electron Ion Collider (JLEIC) e-ring will produce transient beam loading effects in the Superconducting Radio Frequency (SRF) systems that, if not mitigated, could cause unacceptably large beam energy deviation in the injection capture, or exceed the energy acceptance of CEBAF’s recirculating arcs. In the electron storage ring, the beam abort or ion clearing gaps or uneven bucket filling can cause large beam phase transients in the (S)RF cavity control systems and even beam loss due to Robinson instability.more » We have first analysed the beam stability criteria in steady state and estimated the transient effect in Feedforward and Feedback RF controls. Initial analytical models for these effects are shown for the design of the JLEIC e-ring from 3GeV to 12GeV.« less

Reducing Coal Dust With Water Jets

NASA Technical Reports Server (NTRS)

Gangal, M. D.; Lewis, E. V.

1985-01-01

Jets also cool and clean cutting equipment. Modular pick-and-bucket miner suffers from disadvantage: Creates large quantities of potentially explosive coal dust. Dust clogs drive chain and other parts and must be removed by hand. Picks and bucket lips become overheated by friction and be resharpened or replaced frequently. Addition of oscillating and rotating water jets to pick-and-bucket machine keeps down dust, cools cutting edges, and flushes machine. Rotating jets wash dust away from drive chain. Oscillating jets cool cutting surfaces. Both types of jet wet airborne coal dust; it precipitates.

18. EASTERLY VIEW ALONG THE SPILLWAY BUCKET, SHOWING CONSTRUCTION OPERATIONS.... ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. EASTERLY VIEW ALONG THE SPILLWAY BUCKET, SHOWING CONSTRUCTION OPERATIONS.... Volume XX, No. 5, September 5, 1940. - Prado Dam, Spillway, Santa Ana River near junction of State Highways 71 & 91, Corona, Riverside County, CA

Basic coaxial mass driver reference design. [electromagnetic lunar launch

NASA Technical Reports Server (NTRS)

Kolm, H. H.

1977-01-01

The reference design for a basic coaxial mass driver is developed to illustrate the principles and optimization procedures on the basis of numerical integration by programmable pocket calculators. The four inch caliber system uses a single-coil bucket and a single-phase propulsion track with discrete coils, separately energized by capacitors. An actual driver would use multiple-coil buckets and an oscillatory multi-phase drive system. Even the basic, table-top demonstration system should in principle be able to achieve accelerations in the 1,000 m/sq sec range. Current densities of the order of 25 ka/sq cm, continuously achievable only in superconductors, are carried by an ordinary aluminum bucket coil for a short period in order to demonstrate the calculated acceleration. Ultimately the system can be lengthened and provided with a magnetically levitated, superconducting bucket to study levitation dynamics under quasi-steady-state conditions, and to approach lunar escape velocity in an evacuated tube.

NCSTRL+: Adding Multi-Discipline and Multi-Genre Support to the Dienst Protocol Using Clusters and Buckets

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Shen, Stewart N. T.; Zubair, Mohammad

1998-01-01

We describe NCSTRL+, a unified, canonical digital library for scientific and technical information (STI). NCSTRL+ is based on the Networked Computer Science Technical Report Library (NCSTRL), a World Wide Web (WWW) accessible digital library (DL) that provides access to over 100 university departments and laboratories. NCSTRL+ implements two new technologies: cluster functionality and publishing buckets. We have extended Dienst, the protocol underlying NCSTRL, to provide the ability to cluster independent collections into a logically centralized digital library based upon subject category classification, type of organization, and genres of material. The bucket construct provides a mechanism for publishing and managing logically linked entities with multiple data forms as a single object. The NCSTRL+ prototype DL contains the holdings of NCSTRL and the NASA Technical Report Server (NTRS). The prototype demonstrates the feasibility of publishing into a multi-cluster DL, searching across clusters, and storing and presenting buckets of information.

Three-dimensional ghost imaging using acoustic transducer

NASA Astrophysics Data System (ADS)

Zhang, Chi; Guo, Shuxu; Guan, Jian; Cao, Junsheng; Gao, Fengli

2016-06-01

We propose a novel three-dimensional (3D) ghost imaging method using unfocused ultrasonic transducer, where the transducer is used as the bucket detector to collect the total photoacoustic signal intensity from spherical surfaces with different radius circling the transducer. This collected signal is a time sequence corresponding to the optic absorption information on the spherical surfaces, and the values at the same moments in all the sequences are used as the bucket signals to restore the corresponding spherical images, which are assembled as the object 3D reconstruction. Numerical experiments show this method can effectively accomplish the 3D reconstruction and by adding up each sequence on time domain as a bucket signal it can also realize two dimensional (2D) ghost imaging. The influence of the measurement times on the 3D and 2D reconstruction is analyzed with Peak Signal to Noise Ratio (PSNR) as the yardstick, and the transducer as a bucket detector is also discussed.

Development and Evaluation of Ergonomic Interventions for Bucket Handling on Farms

PubMed Central

Fathallah, Fadi A.; Tang, Steven C.H.; Waters, Thomas R.

2016-01-01

Objective The aim of this study was to introduce and evaluate two interventions, Ergo Bucket Carrier (EBC) and Easy Lift (EL), for youths (and adults) to handle water/feed buckets on farms. Background The physical activities of both adult and youth farm workers contribute to the development of low-back disorders (LBDs). Many of the activities youths perform on farms are associated with increased LBD risk, particularly, the handling of water and feed buckets. Methods Seventeen adult and youth participants (10 males and seven females) participated in this study. To assess the risk of LBDs, the participants were instrumented with a three-dimensional spinal electrogoniometer while lifting, carrying, and dumping water buckets using traditional method and the two interventions. Results For both the adult and youth groups, the results showed that the two interventions significantly decrease the magnitudes of LBD risk in many of the tasks evaluated. Overall, the use of the EBC resulted in a 41% reduction in the level of LBD risk for the carrying task, and a reduction of 69% for the dumping task. Using the EL, on the other hand, is especially effective for lifting tasks (55% reduction in LBD risk). Results of the subjective response were consistent with the objective evaluations. Conclusion This study demonstrated the potential for ergonomic interventions in reducing LBD risk during the common farming task of bucket handling. Application Potential application of this study includes the introduction of the EBC and EL in family farms to reduce the LBD risk among youth and adult farmers. PMID:26994024

Structured Course Objects in a Digital Library

NASA Technical Reports Server (NTRS)

Maly, K.; Zubair, M.; Liu, X.; Nelson, M.; Zeil, S.

1999-01-01

We are developing an Undergraduate Digital Library Framework (UDLF) that will support creation/archiving of courses and reuse of existing course material to evolve courses. UDLF supports the publication of course materials for later instantiation for a specific offering and allows the addition of time-dependent and student-specific information and structures. Instructors and, depending on permissions, students can access the general course materials or the materials for a specific offering. We are building a reference implementation based on NCSTRL+, a digital library derived from NCSTRL. Digital objects in NCSTRL+ are called buckets, self-contained entities that carry their own methods for access and display. Current bucket implementations have a two level structure of packages and elements. This is not a rich enough structure for course objects in UDLF. Typically, courses can only be modeled as a multilevel hierarchy and among different courses, both the syntax and semantics of terms may vary. Therefore, we need a mechanism to define, within a particular library, course models, their constituent objects, and the associated semantics in a flexible, extensible way. In this paper, we describe our approach to define and implement these multilayered course objects. We use XML technology to emulate complex data structures within the NCSTRL+ buckets. We have developed authoring and browsing tools to manipulate these course objects. In our current implementation a user downloading an XML based course bucket also downloads the XML-aware tools: an applet that enables the user to edit or browse the bucket. We claim that XML provides an effective means to represent multi-level structure of a course bucket.

IBS and expected luminosity performance for RHIC beams at top energy with 56 MHz SRF cavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fedotov,A.

The purpose of RF system in RHIC is to capture injected bunches, accelerate them to the top energy, and store bunches at the top energy for many hours. The accelerating RF system operates at harmonic number h=360 of the particle revolution frequency f=78.196 kHz, which corresponds to 28.15MHz. The storage RF system accepts the shortened bunches at top energy and provides longitudinal focusing to keep these bunches short during the store time (collision mode). The storage system operates at harmonic number h=7x360=2520, which corresponds to an RF frequency of 197.05 MHz [1]. Recently, an upgrade of storage RF system withmore » a superconducting 56 MHz cavity was proposed [2]. This upgrade will provide significant increase in the acceptance of storage RF bucket. Presently, the short bunch length for collisions is obtained via RF gymnastics with bunch rotation (called re-bucketing), because the length of 197MHz bucket of 5 nsec is too short to accommodate long bunches otherwise. However, due to bucket non-linearity and hardware complications some increase in the longitudinal emittance occurs during re-bucketing. The 56MHz cavity will produce sufficiently short bunches which would allow one to operate without re-bucketing procedure. This Note summarizes simulation of beam evolution due to Intra-beam scattering (IBS) for beam parameters expected with the 56 MHz SRF cavity upgrade. Expected luminosity improvement is shown both for Au ions at 100 GeV/nucleon and for protons at 250 GeV.« less

28. SPILLWAY BUCKET SLAB: REINFORCEMENT DETAILS NO. 1. Sheet S37, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. SPILLWAY BUCKET SLAB: REINFORCEMENT DETAILS NO. 1. Sheet S-37, December, 1939. File no. SA 342/47. - Prado Dam, Spillway, Santa Ana River near junction of State Highways 71 & 91, Corona, Riverside County, CA

30. SPILLWAY BUCKET SLAB: REINFORCEMENT DETAILS NO. 4. Sheet S44, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

30. SPILLWAY BUCKET SLAB: REINFORCEMENT DETAILS NO. 4. Sheet S-44, December, 1939. File no. SA 342/50. - Prado Dam, Spillway, Santa Ana River near junction of State Highways 71 & 91, Corona, Riverside County, CA

29. SPILLWAY BUCKET SLAB: REINFORCEMENT DETAILS NO. 3. Sheet S40, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. SPILLWAY BUCKET SLAB: REINFORCEMENT DETAILS NO. 3. Sheet S-40, December, 1939. File no. SA 342/49. - Prado Dam, Spillway, Santa Ana River near junction of State Highways 71 & 91, Corona, Riverside County, CA

Astronomy in the Native-Oriented Classroom.

ERIC Educational Resources Information Center

Smith, Murray R.

1984-01-01

Outlines background, materials, operation, and evaluation of four activities for grades six-nine designed to illustrate how curriculum activities can enhance astronomy concepts and native awareness: "Were Native People Aware of Milky Way Galaxy?,""Constellation Cans,""Travels of the Big Dipper," and "How Did the…

20. WESTERLY VIEW SHOWING SPILLWAY BUCKET COMPLETED, EXCEPT FOR WING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. WESTERLY VIEW SHOWING SPILLWAY BUCKET COMPLETED, EXCEPT FOR WING WALL IN THE FOREGROUND.... Volume XX, No. 7, September 25, 1940. - Prado Dam, Spillway, Santa Ana River near junction of State Highways 71 & 91, Corona, Riverside County, CA

A New Use for an Old Pickle Bucket.

ERIC Educational Resources Information Center

Mitschele, Jonathan

1994-01-01

Uses the top three inches of a bucket with a vertical notch about three inches wide removed to demonstrate centripetal force and the minimum size of opening needed for a ball rolling inside to leave. Provides a mathematical explanation. (MVL)

Stage 3 bucket shank bypass holes and related method

DOEpatents

Leone, Sal Albert; Eldrid, Sacheverel Quentin; Lupe, Douglas Arthur

2002-01-01

In a multi-stage turbine wherein at least one turbine wheel supports a row of buckets for rotation, and wherein the turbine wheel is located axially between first and second annular fixed arrays of nozzles, a cooling air circuit for purging a wheelspace between the turbine wheel and the second fixed annular array of nozzles comprising a flowpath through a shank portion of one or more buckets connecting a wheelspace between the turbine wheel and the first fixed annular array of nozzles with the wheelspace between the turbine wheel and the second fixed annular array of nozzles.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ansdell, M.; Williams, J. P.; Gaidos, E.

We present ten young (≲10 Myr) late-K and M dwarf stars observed in K2 Campaign 2 that host protoplanetary disks and exhibit quasi-periodic or aperiodic dimming events. Their optical light curves show ∼10–20 dips in flux over the 80-day observing campaign with durations of ∼0.5–2 days and depths of up to ∼40%. These stars are all members of the ρ Ophiuchus (∼1 Myr) or Upper Scorpius (∼10 Myr) star-forming regions. To investigate the nature of these “dippers” we obtained: optical and near-infrared spectra to determine stellar properties and identify accretion signatures; adaptive optics imaging to search for close companions thatmore » could cause optical variations and/or influence disk evolution; and millimeter-wavelength observations to constrain disk dust and gas masses. The spectra reveal Li i absorption and Hα emission consistent with stellar youth (<50 Myr), but also accretion rates spanning those of classical and weak-line T Tauri stars. Infrared excesses are consistent with protoplanetary disks extending to within ∼10 stellar radii in most cases; however, the sub-millimeter observations imply disk masses that are an order of magnitude below those of typical protoplanetary disks. We find a positive correlation between dip depth and WISE-2 (Wide-field Infrared Survey Explorer-2) excess, which we interpret as evidence that the dipper phenomenon is related to occulting structures in the inner disk, although this is difficult to reconcile with the weakly accreting aperiodic dippers. We consider three mechanisms to explain the dipper phenomenon: inner disk warps near the co-rotation radius related to accretion; vortices at the inner disk edge produced by the Rossby Wave Instability; and clumps of circumstellar material related to planetesimal formation.« less

Melatonin secretion is impaired in women with preeclampsia and an abnormal circadian blood pressure rhythm.

PubMed

Bouchlariotou, Sofia; Liakopoulos, Vassilios; Giannopoulou, Myrto; Arampatzis, Spyridon; Eleftheriadis, Theodoros; Mertens, Peter R; Zintzaras, Elias; Messinis, Ioannis E; Stefanidis, Ioannis

2014-08-01

Non-dipping circadian blood pressure (BP) is a common finding in preeclampsia, accompanied by adverse outcomes. Melatonin plays pivotal role in biological circadian rhythms. This study investigated the relationship between melatonin secretion and circadian BP rhythm in preeclampsia. Cases were women with preeclampsia treated between January 2006 and June 2007 in the University Hospital of Larissa. Volunteers with normal pregnancy, matched for chronological and gestational age, served as controls. Twenty-four hour ambulatory BP monitoring was applied. Serum melatonin and urine 6-sulfatoxymelatonin levels were determined in day and night time samples by enzyme-linked immunoassays. Measurements were repeated 2 months after delivery. Thirty-one women with preeclampsia and 20 controls were included. Twenty-one of the 31 women with preeclampsia were non-dippers. Compared to normal pregnancy, in preeclampsia there were significantly lower night time melatonin (48.4 ± 24.7 vs. 85.4 ± 26.9 pg/mL, p<0.001) levels. Adjustment for circadian BP rhythm status ascribed this finding exclusively to non-dippers (p<0.01). Two months after delivery, in 11 of the 21 non-dippers both circadian BP and melatonin secretion rhythm reappeared. In contrast, in cases with retained non-dipping status (n=10) melatonin secretion rhythm remained impaired: daytime versus night time melatonin (33.5 ± 13.0 vs. 28.0 ± 13.8 pg/mL, p=0.386). Urinary 6-sulfatoxymelatonin levels were, overall, similar to serum melatonin. Circadian BP and melatonin secretion rhythm follow parallel course in preeclampsia, both during pregnancy and, at least 2 months after delivery. Our findings may be not sufficient to implicate a putative therapeutic effect of melatonin, however, they clearly emphasize that its involvement in the pathogenesis of a non-dipping BP in preeclampsia needs intensive further investigation.

Nocturnal diastolic blood pressure decline is associated with higher 25-hydroxyvitamin D level and standing plasma renin activity in a hypertensive population.

PubMed

Zhang, Mingchen; Xu, Xinjuan; Liu, Haiming; Li, Haixia; Zhang, Junshi; Gao, Min

2017-01-01

Patients with nondipper hypertension are known to carry a high risk of cardiovascular complications. Vitamin D deficiency is associated with hypertension. Because vitamin D deficiency activates the renin-angiotensin-aldosterone system (RAAS), we hypothesized that this vitamin would interact with the RAAS to influence blood pressure (BP) in nondipper hypertensive patients. We performed a cross-sectional analysis of 1,007 outpatients with hypertension (HTN). Dipper and nondipper patterns were detected, and the two groups were matched for clinical, laboratory, 25-hydroxyvitamin D (25OHD) levels, and ambulatory blood pressure recording. Plasma renin activity (PRA), angiotensin II, and plasma aldosterone concentration (PAC) were assessed in 174 patients treated with calcium channel blockers or no medication. The mean 25OHD concentration in the entire study population was 12.3ng/dL, and the prevalence of vitamin D deficiency was 87.0%. Dipper and nondipper HTN were noted in 187 patients (24.6%) and 573 patients (75.4%). 25OHD levels were similar between nondipper and dipper HTN groups. Forward stepwise logistic regression analysis showed that BMI and age were independent predictors of nondipper HTN. Neither 25OHD levels nor RAAS components were included in the model. In correlation analyses, nocturnal decline of diastolic BP was positively associated with 25OHD levels and standing PRA (r = 0.152 p = 0.045, r = 0.165 p = 0.038, respectively). The present study showed that vitamin D deficiency was astonishingly prevalent in hypertensive subjects residing in Xinjiang, China. There may be a weakly association of nocturnal DBP decline with 25OHD levels and standing PRA levels. We found no association between vitamin D deficiency and nondipper HTN.

Domestic pigs' (Sus scrofa domestica) use of direct and indirect visual and auditory cues in an object choice task.

PubMed

Nawroth, Christian; von Borell, Eberhard

2015-05-01

Recently, foraging strategies have been linked to the ability to use indirect visual information. More selective feeders should express a higher aversion against losses compared to non-selective feeders and should therefore be more prone to avoid empty food locations. To extend these findings, in this study, we present a series of studies investigating the use of direct and indirect visual and auditory information by an omnivorous but selective feeder-the domestic pig. Subjects had to choose between two buckets, with only one containing a reward. Before making a choice, the subjects in Experiment 1 (N = 8) received full information regarding both the baited and non-baited location, either in a visual or auditory domain. In this experiment, the subjects were able to use visual but not auditory cues to infer the location of the reward spontaneously. Additionally, four individuals learned to use auditory cues after a period of training. In Experiment 2 (N = 8), the pigs were given different amounts of visual information about the content of the buckets-lifting either both of the buckets (full information), the baited bucket (direct information), the empty bucket (indirect information) or no bucket at all (no information). The subjects as a group were able to use direct and indirect visual cues. However, over the course of the experiment, the performance dropped to chance level when indirect information was provided. A final experiment (N = 3) provided preliminary results for pigs' use of indirect auditory information to infer the location of a reward. We conclude that pigs at a very young age are able to make decisions based on indirect information in the visual domain, whereas their performance in the use of indirect auditory information warrants further investigation.

View of stars taken during Expedition Six

NASA Image and Video Library

2003-03-23

ISS006-E-40545 (March 2003) --- The bowl and a portion of the “handle” stars of the Big Dipper are visible in this photograph taken by astronaut Donald R. Pettit, Expedition Six NASA ISS science officer, on board the International Space Station (ISS).

The effect of depression on sleep quality and the circadian rhythm of ambulatory blood pressure in older patients with hypertension.

PubMed

Ma, Lina; Li, Yun

2017-05-01

To explore the effect of depression on the sleep quality, and the circadian rhythm of ambulatory blood pressure in patients with essential hypertension. A total of 73 older patients with hypertension were screened for depression and divided into two groups. The Pittsburgh Sleep Quality Index (PSQI) and the circadian rhythm of ambulatory blood pressure were compared between the non-depressed (control) and depressed (case) group. In the case group, 24h ambulatory SBP and DBP, and nocturnal SBP and DBP were higher than in the control group, and the circadian rhythm of non-dipper was higher (67.22% vs 40.13%，P<0.01). There was a positive correlation between PSQI and depression (r=0.432, P<0.01). There was a significant correlation between sleep quality and depression in older patients with hypertension. Depression increases the circadian rhythm of non-dipper in older patients with hypertension. Copyright © 2017 Elsevier Ltd. All rights reserved.

Syntactic Cues to Individuation in Mandarin Chinese

PubMed Central

Cheung, Pierina; Barner, David; Li, Peggy

2012-01-01

When presented with an entity (e.g., a wooden honey-dipper) labeled with a novel noun, how does a listener know that the noun refers to an instance of an object kind (honey-dipper) rather than to a substance kind (wood)? While English speakers draw upon count-mass syntax for clues to the noun’s meaning, linguists have proposed that classifier languages, which lack count-mass syntax, provide other syntactic cues. Three experiments tested Mandarin-speakers’ sensitivity to the diminutive suffix -zi and the general classifier ge when interpreting novel nouns. Experiment 1 found that -zi occurs more frequently with nouns that denote object kinds. Experiment 2 demonstrated Mandarin-speaking adults’ sensitivity to ge and -zi when inferring novel word meanings. Experiment 3 tested Mandarin three- to six-year-olds’ sensitivity to ge. We discuss differences in the developmental course of these cues relative to cues in English, and the impact of this difference to children’s understanding of individuation. PMID:23193387

Rationale, study design, and implementation of the ACS1 study: effect of azilsartan on circadian and sleep blood pressure as compared with amlodipine.

PubMed

Kario, Kazuomi; Hoshide, Satoshi

2014-06-01

The ACS1 (Azilsartan Circadian and Sleep Pressure - the first study) is a multicenter, randomized, open-label, two parallel-group study carried out to investigate the efficacy of an 8-week oral treatment with azilsartan 20 mg in comparison with amlodipine 5 mg. The patients with stage I or II primary hypertension will be randomly assigned to either an azilsartan group (n=350) or an amlodipine group (n=350). The primary endpoint is a change in nocturnal systolic blood pressure (BP) as measured by ambulatory BP monitoring at the end of follow-up relative to the baseline level during the run-in period. In addition, we will carry out the same analysis after dividing four different nocturnal BP dipping statuses (extreme-dippers, dippers, nondipper, and risers). The findings of this study will help in establishing an appropriate antihypertensive treatment for hypertensive patients with a disrupted circadian BP rhythm.

Rationale, study design, and implementation of the ACS1 study: effect of azilsartan on circadian and sleep blood pressure as compared with amlodipine

PubMed Central

Hoshide, Satoshi

2014-01-01

Objective The ACS1 (Azilsartan Circadian and Sleep Pressure – the first study) is a multicenter, randomized, open-label, two parallel-group study carried out to investigate the efficacy of an 8-week oral treatment with azilsartan 20 mg in comparison with amlodipine 5 mg. Materials and methods The patients with stage I or II primary hypertension will be randomly assigned to either an azilsartan group (n=350) or an amlodipine group (n=350). The primary endpoint is a change in nocturnal systolic blood pressure (BP) as measured by ambulatory BP monitoring at the end of follow-up relative to the baseline level during the run-in period. In addition, we will carry out the same analysis after dividing four different nocturnal BP dipping statuses (extreme-dippers, dippers, nondipper, and risers). Conclusion The findings of this study will help in establishing an appropriate antihypertensive treatment for hypertensive patients with a disrupted circadian BP rhythm. PMID:24637789

Correction of electronic record for weighing bucket precipitation gauge measurements

USDA-ARS?s Scientific Manuscript database

Electronic sensors generate valuable streams of forcing and validation data for hydrologic models, but are often subject to noise, which must be removed as part of model input and testing database development. We developed Automated Precipitation Correction Program (APCP) for weighting bucket preci...

Understanding Exponential Growth: As Simple as a Drop in a Bucket.

ERIC Educational Resources Information Center

Goldberg, Fred; Shuman, James

1984-01-01

Provides procedures for a simple laboratory activity on exponential growth and its characteristic doubling time. The equipment needed consists of a large plastic bucket, an eyedropper, a stopwatch, an assortment of containers and graduated cylinders, and a supply of water. (JN)

Impact Disdrometers Instrument Handbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartholomew, Mary Jane

2016-03-01

To improve the quantitative description of precipitation processes in climate models, the U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) Climate Research Facility has been collecting observations of the drop size spectra of rain events since early in 2006. Impact disdrometers were the initial choice due to their reliability, ease of maintenance, and relatively low cost. Each of the two units deployed was accompanied by a nearby tipping bucket. In 2010, the tipping buckets were replaced by weighing buckets rain gauges. Five video disdrometers were subsequently purchased and are described in ARM’s VDIS Handbook.1 As of April 2011, three ofmore » the weighing bucket instruments were deployed, one was to travel with the second ARM Mobile Facility, and the fifth was a spare. Two of the video disdrometers were deployed, a third was to be deployed later in the spring of 2011, one was to travel with the second ARM Mobile Facility, and the last was a spare. Detailed descriptions of impact disdrometers and their datastreams are provided in this document.« less

Simulations of RF capture with barrier bucket in booster at injection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gardner, C.J.

2012-01-23

As part of the effort to increase the number of ions per bunch in RHIC, a new scheme for RF capture of EBIS ions in Booster at injection has been developed. The scheme was proposed by M. Blaskiewicz and J.M. Brennan. It employs a barrier bucket to hold a half turn of beam in place during capture into two adjacent harmonic 4 buckets. After acceleration, this allows for 8 transfers of 2 bunches from Booster into 16 buckets on the AGS injection porch. During the Fall of 2011 the necessary hardware was developed and implemented by the RF and Controlsmore » groups. The scheme is presently being commissioned by K.L. Zeno with Au32+ ions from EBIS. In this note we carry out simulations of the RF capture. These are meant to serve as benchmarks for what can be achieved in practice. They also allow for an estimate of the longitudinal emittance of the bunches on the AGS injection porch.« less

Steam cooling system for a gas turbine

DOEpatents

Wilson, Ian David; Barb, Kevin Joseph; Li, Ming Cheng; Hyde, Susan Marie; Mashey, Thomas Charles; Wesorick, Ronald Richard; Glynn, Christopher Charles; Hemsworth, Martin C.

2002-01-01

The steam cooling circuit for a gas turbine includes a bore tube assembly supplying steam to circumferentially spaced radial tubes coupled to supply elbows for transitioning the radial steam flow in an axial direction along steam supply tubes adjacent the rim of the rotor. The supply tubes supply steam to circumferentially spaced manifold segments located on the aft side of the 1-2 spacer for supplying steam to the buckets of the first and second stages. Spent return steam from these buckets flows to a plurality of circumferentially spaced return manifold segments disposed on the forward face of the 1-2 spacer. Crossover tubes couple the steam supply from the steam supply manifold segments through the 1-2 spacer to the buckets of the first stage. Crossover tubes through the 1-2 spacer also return steam from the buckets of the second stage to the return manifold segments. Axially extending return tubes convey spent cooling steam from the return manifold segments to radial tubes via return elbows.

Buckets, Clusters and Dienst

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Shen, Stewart N. T.

1997-01-01

In this paper we describe NCSTRL+, a unified, canonical digital library for scientific and technical information (STI). NCSTRL+ is based on the Networked Computer Science Technical Report Library (NCSTRL), a World Wide Web (WWW) accessible digital library (DL) that provides access to over 80 university departments and laboratories. NCSTRL+ implements two new technologies: cluster functionality and publishing "buckets." We have extended the Dienst protocol, the protocol underlying NCSTRL, to provide the ability to "cluster" independent collections into a logically centralized digital library based upon subject category classification, type of organization, and genres of material. The concept of "buckets" provides a mechanism for publishing and managing logically linked entities with multiple data formats. The NCSTRL+ prototype DL contains the holdings of NCSTRL and the NASA Technical Report Server (NTRS). The prototype demonstrates the feasibility of publishing into a multi-cluster DL, searching across clusters, and storing and presenting buckets of information. We show that the overhead for these additional capabilities is minimal to both the author and the user when compared to the equivalent process within NCSTRL.

Buckets: Aggregative, Intelligent Agents for Publishing

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Shen, Stewart N. T.; Zubair, Mohammad

1998-01-01

Buckets are an aggregative, intelligent construct for publishing in digital libraries. The goal of research projects is to produce information. This information is often instantiated in several forms, differentiated by semantic types (report, software, video, datasets, etc.). A given semantic type can be further differentiated by syntactic representations as well (PostScript version, PDF version, Word version, etc.). Although the information was created together and subtle relationships can exist between them, different semantic instantiations are generally segregated along currently obsolete media boundaries. Reports are placed in report archives, software might go into a software archive, but most of the data and supporting materials are likely to be kept in informal personal archives or discarded altogether. Buckets provide an archive-independent container construct in which all related semantic and syntactic data types and objects can be logically grouped together, archived, and manipulated as a single object. Furthermore, buckets are active archival objects and can communicate with each other, people, or arbitrary network services.

Injection method of barrier bucket supported by off-aligned electron cooling for CRing of HIAF

NASA Astrophysics Data System (ADS)

Shen, Guo-Dong; Yang, Jian-Cheng; Xia, Jia-Wen; Mao, Li-Jun; Yin, Da-Yu; Chai, Wei-Ping; Shi, Jian; Sheng, Li-Na; Smirnov, A.; Wu, Bo; Zhao, He

2016-08-01

A new accelerator complex, HIAF (the High Intensity Heavy Ion Accelerator Facility), has been approved in China. It is designed to provide intense primary and radioactive ion beams for research in high energy density physics, nuclear physics, atomic physics as well as other applications. In order to achieve a high intensity of up to 5×1011 ppp 238U34+, the Compression Ring (CRing) needs to stack more than 5 bunches transferred from the Booster Ring (BRing). However, the normal bucket to bucket injection scheme can only achieve an intensity gain of 2, so an injection method, fixed barrier bucket (BB) supported by electron cooling, is proposed. To suppress the severe space charge effect during the stacking process, off-alignment is adopted in the cooler to control the transverse emittance. In this paper, simulation and optimization with the BETACOOL program are presented. Supported by New Interdisciplinary and Advanced Pilot Fund of Chinese Academy of Sciences

Arthroscopic partial meniscectomy of a medial meniscus bucket-handle tear using the posteromedial portal.

PubMed

Ahn, Jin Hwan; Oh, Irvin

2004-09-01

Arthroscopic resection of irreparable bucket-handle tears of the medial meniscus is a commonly performed procedure. Adequate visualization of the posterior horn of the medial meniscus can be a challenging task with the conventional use of the anterior portal. An attempt to resect the posterior horn in a blind fashion may result in iatrogenic damage of the articular cartilage in the posterior compartment, over-resection of a remnant meniscus, or an insufficient resection of the torn fragment. We describe the use of the posteromedial portal for an accurate visualization and resection of the posterior attachment of a bucket-handle tear for arthroscopic partial meniscectomy, as well as detection of other injuries that may be involved in the posteromedial compartment, while avoiding injury to other intra-articular structures during the arthroscopic procedure. We found that the use of the posteromedial portal is a safe and efficient method in removing a bucket-handle tear of the medial meniscus in one piece.

Pyrometer mount for a closed-circuit thermal medium cooled gas turbine

DOEpatents

Jones, Raymond Joseph; Kirkpatrick, Francis Lawrence; Burns, James Lee; Fulton, John Robert

2002-01-01

A steam-cooled second-stage nozzle segment has an outer band and an outer cover defining a plenum therebetween for receiving cooling steam for flow through the nozzles to the inner band and cover therefor and return flow through the nozzles. To measure the temperature of the buckets of the stage forwardly of the nozzle stage, a pyrometer boss is electron beam-welded in an opening through the outer band and TIG-welded to the outer cover plate. By machining a hole through the boss and seating a linearly extending tube in the boss, a line of sight between a pyrometer mounted on the turbine frame and the buckets is provided whereby the temperature of the buckets can be ascertained. The welding of the boss to the outer band and outer cover enables steam flow through the plenum without leakage, while providing a line of sight through the outer cover and outer band to measure bucket temperature.

Investigation of efficiency of electric drive control system of excavator traction mechanism based on feedback on load

NASA Astrophysics Data System (ADS)

Kuznetsov, N. K.; Iov, I. A.; Iov, A. A.

2018-05-01

The article presents the results of a study of the efficiency of the electric drive control system of the traction mechanism of a dragline based on the use of feedback on load in the traction cable. The investigations were carried out using a refined electromechanical model of the traction mechanism, which took into account not only the elastic elements of the gearbox, the backlashes in it and the changes in the kinematic parameters of the mechanism during operation, but also the mechanical characteristics of the electric drive and the features of its control system. By mathematical modeling of the transient processes of the electromechanical system, it is shown that the introduction of feedback on the load in the elastic element allows one to reduce the dynamic loads in the traction mechanism and to limit the elastic oscillations of the actuating mechanism in comparison with the standard control system. Fixed as a general decrease in the dynamic load of the nodes of traction mechanism in the modes of loading and latching of the bucket, and a decrease the operating time of the mechanism at maximum load. At the same time, undesirable phenomena in the operation of the electric drive were also associated with the increase in the recovery time of the steady-state value of the speed of the actuating mechanism under certain operating conditions, which can lead to a decrease in the reliability of the mechanical part and the productivity of the traction mechanism.

Use of midlatitude soil moisture and meteorological observations to validate soil moisture simulations with biosphere and bucket models

NASA Technical Reports Server (NTRS)

Robock, Alan; Vinnikov, Konstantin YA.; Schlosser, C. Adam; Speranskaya, Nina A.; Xue, Yongkang

1995-01-01

Soil moisture observations in sites with natural vegetation were made for several decades in the former Soviet Union at hundreds of stations. In this paper, the authors use data from six of these stations from different climatic regimes, along with ancillary meteorological and actinometric data, to demonstrate a method to validate soil moisture simulations with biosphere and bucket models. Some early and current general circulation models (GCMs) use bucket models for soil hydrology calculations. More recently, the Simple Biosphere Model (SiB) was developed to incorporate the effects of vegetation on fluxes of moisture, momentum, and energy at the earth's surface into soil hydrology models. Until now, the bucket and SiB have been verified by comparison with actual soil moisture data only on a limited basis. In this study, a Simplified SiB (SSiB) soil hydrology model and a 15-cm bucket model are forced by observed meteorological and actinometric data every 3 h for 6-yr simulations at the six stations. The model calculations of soil moisture are compared to observations of soil moisture, literally 'ground truth,' snow cover, surface albedo, and net radiation, and with each other. For three of the stations, the SSiB and 15-cm bucket models produce good simulations of seasonal cycles and interannual variations of soil moisture. For the other three stations, there are large errors in the simulations by both models. Inconsistencies in specification of field capacity may be partly responsible. There is no evidence that the SSiB simulations are superior in simulating soil moisture variations. In fact, the models are quite similar since SSiB implicitly has a bucket embedded in it. One of the main differences between the models is in the treatment of runoff due to melting snow in the spring -- SSiB incorrectly puts all the snowmelt into runoff. While producing similar soil moisture simulations, the models produce very different surface latent and sensible heat fluxes, which would have large effects on GCM simulations.

KSC-2014-4227

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4233

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4232

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4231

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4221

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, helicopter pilots walk to their helicopter prior to practicing use of a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4229

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4223

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4228

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4222

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4234

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, a three-person helicopter crew recently practiced using a Bambi Bucket to pick up water from a nearby waterway and dropping it on simulated targets at the center’s Shuttle Landing Facility. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

Turbine bucket for use in gas turbine engines and methods for fabricating the same

DOEpatents

Garcia-Crespo, Andres

2014-06-03

A turbine bucket for use with a turbine engine. The turbine bucket includes an airfoil that extends between a root end and a tip end. The airfoil includes an outer wall that defines a cavity that extends from the root end to the tip end. The outer wall includes a first ceramic matrix composite (CMC) substrate that extends a first distance from the root end to the tip end. An inner wall is positioned within the cavity. The inner wall includes a second CMC substrate that extends a second distance from the root end towards the tip end that is different than the first distance.

Metadata and Buckets in the Smart Object, Dumb Archive (SODA) Model

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Croom, Delwin R., Jr.; Robbins, Steven W.

2004-01-01

We present the Smart Object, Dumb Archive (SODA) model for digital libraries (DLs), and discuss the role of metadata in SODA. The premise of the SODA model is to "push down" many of the functionalities generally associated with archives into the data objects themselves. Thus the data objects become "smarter", and the archives "dumber". In the SODA model, archives become primarily set managers, and the objects themselves negotiate and handle presentation, enforce terms and conditions, and perform data content management. Buckets are our implementation of smart objects, and da is our reference implementation for dumb archives. We also present our approach to metadata translation for buckets.

Posterior double PCL sign: a case report of unusual MRI finding of bucket-handle tear of medial meniscus.

PubMed

Yoo, Jae Ho; Hahn, Sung Ho; Yi, Seung Rim; Kim, Seong Wan

2007-11-01

Among the MRI signs of bucket-handle tears of medial meniscus, double posterior cruciate ligament (PCL) sign denotes a low signal band anterior and parallel to the PCL, which looks like another PCL in MR images. If the bucket-handle fragment subsequently tears at the anterior horn, the torn meniscal substance can be displaced to the posterosuperior region of the PCL, and looks like another PCL behind the original PCL. We propose the lesion be called the "posterior double PCL sign" in contrast to the ordinary double PCL sign. We present a case showing the posterior double PCL sign.

19. WESTERLY VIEW ALONG SPILLWAY BUCKET, SHOWING CONSTRUCTION OPERATIONS IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. WESTERLY VIEW ALONG SPILLWAY BUCKET, SHOWING CONSTRUCTION OPERATIONS IN PROGRESS. THE DAM EMBANKMENT IS SHOWN IN THE LEFT DISTANCE.... Volume XX, No. 6, September 5, 1940. - Prado Dam, Spillway, Santa Ana River near junction of State Highways 71 & 91, Corona, Riverside County, CA

30 CFR 77.1602 - Use of aerial tramways to transport persons.

Code of Federal Regulations, 2014 CFR

2014-07-01

... other than maintenance men shall not ride empty buckets on aerial tramways unless the following features... communication between terminals. (c) Power drives with emergency power available in case of primary power failure. (d) Buckets equipped with positive locks to prevent accidental tripping or dumping. ...

30 CFR 77.1602 - Use of aerial tramways to transport persons.

Code of Federal Regulations, 2013 CFR

2013-07-01

... other than maintenance men shall not ride empty buckets on aerial tramways unless the following features... communication between terminals. (c) Power drives with emergency power available in case of primary power failure. (d) Buckets equipped with positive locks to prevent accidental tripping or dumping. ...

30 CFR 77.1602 - Use of aerial tramways to transport persons.

Code of Federal Regulations, 2012 CFR

2012-07-01

... other than maintenance men shall not ride empty buckets on aerial tramways unless the following features... communication between terminals. (c) Power drives with emergency power available in case of primary power failure. (d) Buckets equipped with positive locks to prevent accidental tripping or dumping. ...

Mapping Stars with TI-83.

ERIC Educational Resources Information Center

Felsager, Bjorn

2001-01-01

Describes a mathematics and science project designed to help students gain some familiarity with constellations and trigonometry by using the TI-83 calculator as a tool. Specific constellations such as the Big Dipper (Plough) and other sets of stars are located using stereographic projection and graphed using scatterplots. (MM)

On the robustness of bucket brigade quantum RAM

NASA Astrophysics Data System (ADS)

Arunachalam, Srinivasan; Gheorghiu, Vlad; Jochym-O'Connor, Tomas; Mosca, Michele; Varshinee Srinivasan, Priyaa

2015-12-01

We study the robustness of the bucket brigade quantum random access memory model introduced by Giovannetti et al (2008 Phys. Rev. Lett.100 160501). Due to a result of Regev and Schiff (ICALP ’08 733), we show that for a class of error models the error rate per gate in the bucket brigade quantum memory has to be of order o({2}-n/2) (where N={2}n is the size of the memory) whenever the memory is used as an oracle for the quantum searching problem. We conjecture that this is the case for any realistic error model that will be encountered in practice, and that for algorithms with super-polynomially many oracle queries the error rate must be super-polynomially small, which further motivates the need for quantum error correction. By contrast, for algorithms such as matrix inversion Harrow et al (2009 Phys. Rev. Lett.103 150502) or quantum machine learning Rebentrost et al (2014 Phys. Rev. Lett.113 130503) that only require a polynomial number of queries, the error rate only needs to be polynomially small and quantum error correction may not be required. We introduce a circuit model for the quantum bucket brigade architecture and argue that quantum error correction for the circuit causes the quantum bucket brigade architecture to lose its primary advantage of a small number of ‘active’ gates, since all components have to be actively error corrected.

Buckets: A New Digital Library Technology for Preserving NASA Research.

ERIC Educational Resources Information Center

Nelson, Michael L.

2001-01-01

Discusses the need for preserving and disseminating scientific and technical information through digital libraries and describes buckets, an intelligent construct for publishing that contains data and metadata and methods for accessing them. Explains SODA (Smart Object, Dumb Archive) and discusses experiences using these technologies in NASA and…

29 CFR 1910.266 - Logging operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... employee against contact with a running chain saw. Sharp, calk-soled boots or other slip-resistant type... (C) Each moving element such as, but not limited to blades, buckets, saws and shears, shall be... moving elements such as, but not limited to, blades, buckets, saws and shears, after the machine is shut...

29 CFR 1910.266 - Logging operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... employee against contact with a running chain saw. Sharp, calk-soled boots or other slip-resistant type... (C) Each moving element such as, but not limited to blades, buckets, saws and shears, shall be... moving elements such as, but not limited to, blades, buckets, saws and shears, after the machine is shut...

29 CFR 1910.266 - Logging operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... employee against contact with a running chain saw. Sharp, calk-soled boots or other slip-resistant type... (C) Each moving element such as, but not limited to blades, buckets, saws and shears, shall be... moving elements such as, but not limited to, blades, buckets, saws and shears, after the machine is shut...

29 CFR 1910.266 - Logging operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... employee against contact with a running chain saw. Sharp, calk-soled boots or other slip-resistant type... (C) Each moving element such as, but not limited to blades, buckets, saws and shears, shall be... moving elements such as, but not limited to, blades, buckets, saws and shears, after the machine is shut...

29 CFR 1910.266 - Logging operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... employee against contact with a running chain saw. Sharp, calk-soled boots or other slip-resistant type... (C) Each moving element such as, but not limited to blades, buckets, saws and shears, shall be... moving elements such as, but not limited to, blades, buckets, saws and shears, after the machine is shut...

Shaper-Based Filters for the compensation of the load cell response in dynamic mass measurement

NASA Astrophysics Data System (ADS)

Richiedei, Dario; Trevisani, Alberto

2018-01-01

This paper proposes a novel model-based signal filtering technique for dynamic mass measurement through load cells. Load cells are sensors with an underdamped oscillatory response which usually imposes a long settling time. Real-time filtering is therefore necessary to compensate for such a dynamics and to quickly retrieve the mass of the measurand (which is the steady state value of the load cell response) before the measured signal actually settles. This problem has a big impact on the throughput of industrial weighing machines. In this paper a novel solution to this problem is developed: a model-based filtering technique is proposed to ensure accurate, robust and rapid estimation of the mass of the measurand. The digital filters proposed are referred to as Shaper-Based Filters (SBFs) and are based on the convolution of the load cell output signal with a sequence of few impulses (typically, between 2 and 5). The amplitudes and the instants of application of such impulses are computed through the analytical development of the load cell step response, by imposing the admissible residual oscillation in the steady-state filtered signal and by requiring the desired sensitivity of the filter. The inclusion of robustness specifications tackles effectively the unavoidable uncertainty and variability in the load cell frequency and damping. The effectiveness of the proposed filters is proved experimentally through an industrial set up: the load-cell-instrumented weigh bucket of a multihead weighing machine for packaging. A performance comparison with other benchmark filters is provided and discussed too.

New 2012 precipitation frequency estimation analysis for Alaska : musings on data used and the final product.

DOT National Transportation Integrated Search

2013-06-01

The major product of this study was a precipitation frequency atlas for the entire state of Alaska; this atlas is available at : http://dipper.nws.noaa.gov/hdsc/pfds/. The process of contributing to this study provided an opportunity to (1) evaluate ...

"Double Dippers."

ERIC Educational Resources Information Center

Gose, Ben

1995-01-01

Increasingly, four-year college students are taking additional courses at nearby two-year colleges, for a variety of reasons: to reduce costs, to sample technical education, for scheduling purposes, for smaller classes, and for less difficult courses. In some cases, the four-year college may contract with the two-year college to provide remedial…

KSC-2014-4230

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, crew chief Mark Smith of URS looks out the side door down at the Bambi Bucket. Securely strapped to the helicopter floor, his position allows him to tell the pilot precisely when to release the water over the target. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

Second Stage Turbine Bucket Airfoil.

DOEpatents

Xu, Liming; Ahmadi, Majid; Humanchuk, David John; Moretto, Nicholas; Delehanty, Richard Edward

2003-05-06

The second-stage buckets have airfoil profiles substantially in accordance with Cartesian coordinate values of X, Y and Z set forth in inches in Table I wherein Z is a perpendicular distance from a plane normal to a radius of the turbine centerline and containing the X and Y values with the Z value commencing at zero in the X, Y plane at the radially innermost aerodynamic section of the airfoil and X and Y are coordinate values defining the airfoil profile at each distance Z. The X, Y and Z values may be scaled as a function of the same constant or number to provide a scaled-up or scaled-down airfoil section for the bucket.

Third-stage turbine bucket airfoil

DOEpatents

Pirolla, Peter Paul; Siden, Gunnar Leif; Humanchuk, David John; Brassfield, Steven Robert; Wilson, Paul Stuart

2002-01-01

The third-stage buckets have airfoil profiles substantially in accordance with Cartesian coordinate values of X, Y and Z set forth in inches in Table I wherein Z is a perpendicular distance from a plane normal to a radius of the turbine centerline and containing the X and Y values with the Z value commencing at zero in the X, Y plane at the radially innermost aerodynamic section of the airfoil and X and Y are coordinates defining the airfoil profile at each distance Z. The X, Y and Z values may be scaled as a function of the same constant or number to provide a scaled-up or scaled-down airfoil section for the bucket.

First-stage high pressure turbine bucket airfoil

DOEpatents

Brown, Theresa A.; Ahmadi, Majid; Clemens, Eugene; Perry, II, Jacob C.; Holiday, Allyn K.; Delehanty, Richard A.; Jacala, Ariel Caesar

2004-05-25

The first-stage buckets have airfoil profiles substantially in accordance with Cartesian coordinate values of X, Y and Z set forth in Table I wherein Z is a perpendicular distance from a plane normal to a radius of the turbine centerline and containing the X and Y values with the Z value commencing at zero in the X, Y plane at the radially innermost aerodynamic section of the airfoil and X and Y are coordinates defining the airfoil profile at each distance Z. The X, Y and Z values may be scaled as a function of the same constant or number to provide a scaled-up or scaled-down airfoil section for the bucket.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seiya, K.; Drennan, C.; Pellico, W.

The extraction bucket position in the Fermilab Booster is controlled with a cogging process that involves the comparison of the Booster rf count and the Recycler Ring revolution marker. A one rf bucket jitter in the ex-traction bucket position results from the variability of the process that phase matches the Booster to the Recycler. However, the new slow phase lock process used to lock the frequency and phase of the Booster rf to the Recycler rf has been made digital and programmable and has been modified to correct the extraction notch position. The beam loss at the Recycler injection hasmore » been reduced by 20%. Beam studies and the phase lock system will be discussed in this paper.« less

Measurement of meniscofemoral contact pressure after repair of bucket-handle tears with biodegradable implants.

PubMed

Becker, Roland; Wirz, Dieter; Wolf, Cornelius; Göpfert, Beat; Nebelung, Wolfgang; Friederich, Niklaus

2005-05-01

Biodegradable implants are frequently used for meniscus repair. Articular cartilage damage has been reported recently after meniscus repair with biodegradable implants. The aim of the study was to investigate the meniscofemoral contact pressure at the posterior horn of the medial and lateral meniscus after repair of bucket-handle lacerations. Specimens were mounted in a materials testing machine (Bionix 858, MTS) which was equipped with a load cell. The quadriceps tendon was attached to a hydraulic cylinder, and knee motion was controlled via tension of the quadriceps tendon. A piezo-resistive system (Tekscan, Boston, MA, USA) measured the meniscofemoral contact pressure. Five different types of biodegradable implants (Arrow, Dart, Fastener, Stinger and Meniscal Screw) and horizontal suture (no. 2 Ethibond) were tested. The knee was extended from 90 degrees of flexion to 0 degrees under a constant load of 350 N due to adjustment of the tension force of the quadriceps tendon. The femorotibial pressure and contact area were recorded at 0 degree, 30 degrees, 60 degrees and 90 degrees of flexion. The meniscofemoral pressure did not increase after meniscus repair with biodegradable implants or sutures. The meniscofemoral peak pressure at the posterior horn was 1.46+/-1.54 MPa in the medial compartment and 1.08+/-1.17 MPa in the lateral compartment at full knee extension. The meniscofemoral pressure increased significantly in both compartments with knee flexion from 0 degree to 90 degrees. Biodegradable implants for meniscus repair do not affect the meniscofemoral pressure. However, there remains a risk of damage to the cartilage when barbed implants are used. If the implant is not entirely advanced into the meniscus, the sharp head or some of the barbs at the column of the implant may come into direct contact with the articular cartilage of the femoral condyle or tibial plateau. The authors presume that incorrect positioning of the implant seems to be the major reason for cartilage damage.

The tale of two buckets and associated containers: impact on aedes albopictus oviposition

USDA-ARS?s Scientific Manuscript database

Aedes albopictus is an invasive species. Its oviposition behavior is the subject of several projects in our research unit. The main emphasis of this presentation is a study which utilizes two five gallon buckets, one heated and one with ambient temperature. The heat is provided by an aquarium hea...

KSC00pp0515

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- A NASA helicopter lifts a high-impact-resistant flexible plastic bucket filled with water. The container will be used for fire protection on property and buildings at Kennedy Space Center.. Known as the "Bambi" bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

KSC00pp0513

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- A NASA helicopter lifts a high-impact-resistant flexible plastic bucket that will be used for fire protection on property and buildings at Kennedy Space Center. Known as the "Bambi" bucket, the 324-gallon container will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area

KSC-00pp0513

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- A NASA helicopter lifts a high-impact-resistant flexible plastic bucket that will be used for fire protection on property and buildings at Kennedy Space Center. Known as the "Bambi" bucket, the 324-gallon container will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area

KSC-00pp0515

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- A NASA helicopter lifts a high-impact-resistant flexible plastic bucket filled with water. The container will be used for fire protection on property and buildings at Kennedy Space Center.. Known as the "Bambi" bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

Plastic Tubing and Maple Syrup Quality

Treesearch

Russell S. Walters; Harry W. Yawney

1978-01-01

Maple syrup made from sap collected using improperly or carelessly installed plastic pipelines varied more in color from day to day, and was more often darker in color, than sap collected from either the property installed pipeline or clean, frequently emptied galvanized buckets. Use of both properly installed tubing and buckets, following recommended procedures,...

Data-dependent bucketing improves reference-free compression of sequencing reads.

PubMed

Patro, Rob; Kingsford, Carl

2015-09-01

The storage and transmission of high-throughput sequencing data consumes significant resources. As our capacity to produce such data continues to increase, this burden will only grow. One approach to reduce storage and transmission requirements is to compress this sequencing data. We present a novel technique to boost the compression of sequencing that is based on the concept of bucketing similar reads so that they appear nearby in the file. We demonstrate that, by adopting a data-dependent bucketing scheme and employing a number of encoding ideas, we can achieve substantially better compression ratios than existing de novo sequence compression tools, including other bucketing and reordering schemes. Our method, Mince, achieves up to a 45% reduction in file sizes (28% on average) compared with existing state-of-the-art de novo compression schemes. Mince is written in C++11, is open source and has been made available under the GPLv3 license. It is available at http://www.cs.cmu.edu/∼ckingsf/software/mince. carlk@cs.cmu.edu Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press.

SPEEDES - A multiple-synchronization environment for parallel discrete-event simulation

NASA Technical Reports Server (NTRS)

Steinman, Jeff S.

1992-01-01

Synchronous Parallel Environment for Emulation and Discrete-Event Simulation (SPEEDES) is a unified parallel simulation environment. It supports multiple-synchronization protocols without requiring users to recompile their code. When a SPEEDES simulation runs on one node, all the extra parallel overhead is removed automatically at run time. When the same executable runs in parallel, the user preselects the synchronization algorithm from a list of options. SPEEDES currently runs on UNIX networks and on the California Institute of Technology/Jet Propulsion Laboratory Mark III Hypercube. SPEEDES also supports interactive simulations. Featured in the SPEEDES environment is a new parallel synchronization approach called Breathing Time Buckets. This algorithm uses some of the conservative techniques found in Time Bucket synchronization, along with the optimism that characterizes the Time Warp approach. A mathematical model derived from first principles predicts the performance of Breathing Time Buckets. Along with the Breathing Time Buckets algorithm, this paper discusses the rules for processing events in SPEEDES, describes the implementation of various other synchronization protocols supported by SPEEDES, describes some new ones for the future, discusses interactive simulations, and then gives some performance results.

Call Admission Control on Single Node Networks under Output Rate-Controlled Generalized Processor Sharing (ORC-GPS) Scheduler

NASA Astrophysics Data System (ADS)

Hanada, Masaki; Nakazato, Hidenori; Watanabe, Hitoshi

Multimedia applications such as music or video streaming, video teleconferencing and IP telephony are flourishing in packet-switched networks. Applications that generate such real-time data can have very diverse quality-of-service (QoS) requirements. In order to guarantee diverse QoS requirements, the combined use of a packet scheduling algorithm based on Generalized Processor Sharing (GPS) and leaky bucket traffic regulator is the most successful QoS mechanism. GPS can provide a minimum guaranteed service rate for each session and tight delay bounds for leaky bucket constrained sessions. However, the delay bounds for leaky bucket constrained sessions under GPS are unnecessarily large because each session is served according to its associated constant weight until the session buffer is empty. In order to solve this problem, a scheduling policy called Output Rate-Controlled Generalized Processor Sharing (ORC-GPS) was proposed in [17]. ORC-GPS is a rate-based scheduling like GPS, and controls the service rate in order to lower the delay bounds for leaky bucket constrained sessions. In this paper, we propose a call admission control (CAC) algorithm for ORC-GPS, for leaky-bucket constrained sessions with deterministic delay requirements. This CAC algorithm for ORC-GPS determines the optimal values of parameters of ORC-GPS from the deterministic delay requirements of the sessions. In numerical experiments, we compare the CAC algorithm for ORC-GPS with one for GPS in terms of schedulable region and computational complexity.

RF Curves for Extraction from the Accumulator

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGinnis, Dav; /Fermilab

2002-03-10

Since the start of Run IIa, the RF curves for the extraction process from the Accumulator have been based on an algorithm described in Pbar Note 636. There are a number of problems with this procedure that result in a dilution of the longitudinal phase space of the extracted beam. The procedure consists of a number of steps in which the frequency curve during each process is a linear time ramp. For a constant bend field, the synchronous phase angle is given as: {Lambda} = sin({phi}{sub s}) = -h/{eta} (1/f{sub rf}){sup 2}df{sub rf}/dt/qV/pc where h is the harmonic number ofmore » the RF. Equation (1) shows that if the frequency curve consists of a number of linear time ramps with different slopes, there will be discontinuities in the synchronous phase. These discontinuities in the synchronous phase will lead to dipole oscillations of the beam in the RF bucket. The discontinuities observed for the present RF curves are about 10 degrees. In the procedure outlined in Pbar Note 636, the RF bucket is formed on the high energy edge of the rectangular momentum distribution. As the RF bucket is pulled away from the core, it is also programmed to increase in area. If the distribution is not perfectly rectangular, or if the bucket is not formed at the edge of the distribution, the growing bucket will gather up more particles at the edges of the bucket resulting in a substantial increase of longitudinal emittance. Finally, it is fairly difficult to prepare a rectangular momentum distribution and keep it rectangular for extended periods of time. Once the rectangular distribution is prepared, the core momentum cooling must be turned off. If there is a delay in the extraction process, the sharp edges of the rectangular distribution will soon diffuse. With the momentum cooling disabled, the longitudinal emittance of the core will grow resulting in larger longitudinal emittances for the extracted beam.« less

Scale-invariance of sediment patterns - the fingerprint of fundamental drivers (Jean Baptiste Lamarck Medal Lecture)

NASA Astrophysics Data System (ADS)

Schlager, Wolfgang

2015-04-01

In contrast to the realms of magmatism and metamorphism, most depositional processes can be observed directly at the earth's surface. Observation of sediment patterns advanced significantly with the advent of remote sensing and 3D reflection seismics. Remote sensing is particularly relevant for the present topic because it documents mainly Holocene sediments - the best objects to link depositional processes to products. Classic examples of scale-invariant geometry are channel-fan systems, i.e. river-delta and canyon-fan complexes. The underlying control in both instances is the energy-dispersion of a channeled stream of water that discharges in a body of still water. The resulting fan-shaped sediment accumulations are scale-invariant over 7 orders of magnitude in linear size. The Mesozoic-Cenozoic record shows comparable trends and patterns. Further examples of depositional scale-invariance include foresets of non-cohesive sediments and braided-channel deposits. Reefs and carbonate platforms offer an example of scale-invariance related to biotic growth. Shallow-water carbonate platforms rimmed by reefs or reef-rimmed atolls with deep lagoons are characteristic morphologies of tropical carbonate deposits. The structure has been compared to a bucket where stiff reef rims hold a pile of loose sediment. Remote sensing data from the Maldive, Chagos and Laccadive archipelagos of the Indian Ocean show that bucket structures are the dominant depositional pattern from meter-size reefs to archipelagos of hundreds of kilometers in diameter, i.e. over more than 4 orders of magnitude in linear size. Over 2.5 orders of magnitude, the bucket structures qualify as statistical fractals. Ecologic and hydrodynamic studies on modern reefs suggest that the bucket structure is a form of biotic self-organization: The edge position in a reef is favored over the center position because bottom shear is higher and the diffusive boundary layer between reef and water thinner. Thus, the reef edge has easier access to nutrients. Moreover, the edge is less likely to be buried by sediment. The bucket structure is an ecologic response to these conditions. Buckets have been documented from all periods of the Phanerozoic and analogous structures from the late Proterozoic show that the microbial carbonate factory also built buckets. We conclude that a voyage through scales in the sediment realm reveals islands of scale-invariance wherever a single principle dominates the sedimentation process.

Double and triple-harmonic RF buckets and their use for bunch squeezing in AGS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gardner, C. J.

2016-08-24

For the past several years we have merged bunches in AGS in order to achieve the desired intensity per bunch prior to injection into RHIC. The merging is done on a flat porch at or above AGS injection energy. Because the merges involve the reduction of the RF harmonic number by a factor of 2 (for a 2 to 1 merge) and then a factor of 3 (for a 3 to 1 merge), one requires RF frequencies 6hf s, 3hf s, 2hf s and hf s, where f s is the revolution frequency on the porch and h = 4more » is the fundamental harmonic number. The standard AGS RF cavities cannot operate at the lowest frequencies 2hf s and hf s; these are provided by two modified cavities. Upon completion of the merges, the bunches are sitting in harmonic h buckets. In order to be accelerated they need to be squeezed into harmonic 3h buckets. This is accomplished by producing a double-harmonic bucket in which harmonics h and 2h act in concert, and then a triple-harmonic bucket in which harmonics h, 2h, and 3h act in concert. Simulations have shown that the squeeze presents an acceptance bottleneck which limits the longitudinal emittance that can be put into the harmonic 3h bucket. In this note the areas of the double and triple-harmonic buckets are calculated explicitly, and it is shown that these go through a minimum as the RF voltages are raised to the desired values. Several RF voltage ranges are examined, and the acceptance bottleneck is determined for each of these. Finally, the acceptance bottleneck for Au77+ bunches in AGS is calculated for several RF voltage ranges. The main result is that the RF voltages for the low-frequency harmonic h and 2h cavities both must be at least 22 kV in order to achieve an acceptance of 0:6 eV s per nucleon. If the harmonic h and 2h voltages are 15 and 22 kV, respectively, then the acceptance is reduced to 0:548 eV s per nucleon.« less

A Basic Robotic Excavator (the Glenn Digger): Description, Design, and Initial Operation

NASA Technical Reports Server (NTRS)

Bauman, Steve; Newman, Paul; Izadnegahdar, Alain; Johnson, Kyle; Abel, Phillip

2016-01-01

This paper describes the design, commercial part selections, fabrication, assembly, installation, and initial operation of a two degree of freedom robotic excavator. Colloquially referred to as "the NASA Glenn Digger," it was designed specifically to be mounted onto, and to operate with, the then newly developed Centaur 2 robotic mobility base. The excavator, when mounted to Centaur 2, is designed to scoop loose regolith from the terrain, raise its loaded bucket up and dump the load into a hopper of at least a 1-m-height. The hopper represents the input to a machine that would process the raw material, such as to produce oxygen from lunar regolith as would be required for long-term lunar habitation. This equipment debuted at the annual Research and Technology Studies ("Desert RATS", Ref. 1) event held north of Flagstaff, Arizona, in September of 2010, when the Digger was successfully joined to Centaur 2 and the shoveling articulation was demonstrated. During 2011, the hardware was modified for added strength, strain gauges were added to measure loads, and the controls were improved in preparation for the 2011 Desert RATS event, where additional "field operations" experience was gained.

46 CFR 199.175 - Survival craft and rescue boat equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... breakage-resistant material. (9) Fire extinguisher. The fire extinguisher must be approved under approval series 162.028. The fire extinguisher must be type B-C, size II, or larger. Two type B-C, size I fire... portions of the hull. (4) Bucket. The bucket must be made of corrosion-resistant material and should either...

Locatum Structures and the Acquisition of Telicity

ERIC Educational Resources Information Center

Hodgson, Miren

2010-01-01

This article presents a study of a between-subjects design experiment on the comprehension of telicity in simple telic predicates (e.g., "John filled the bucket") and locatum predicates (e.g., "the water filled the bucket") in L1 Spanish. Weist, Wysocka, and Lyytinen (1991) for English and Finnish, and Van Hout (1997, 1998b) for English and Dutch…

Liquid cooled counter flow turbine bucket

DOEpatents

Dakin, James T.

1982-09-21

Means and a method are provided whereby liquid coolant flows radially outward through coolant passages in a liquid cooled turbine bucket under the influence of centrifugal force while in contact with countercurrently flowing coolant vapor such that liquid is entrained in the flow of vapor resulting in an increase in the wetted cooling area of the individual passages.

In-Situ Subsurface Coating of Corroded Steel Sheet Pile Structures: Final Report on Project F08-AR06

DTIC Science & Technology

2017-09-01

scraped the sheet pile wall with an excavator. After scraping the out-pans with a flat edge bucket, the contractor welded a blade on the bucket...unusual striations were parallel grooves running at 30 – 45 degrees from the vertical. Some patterns cross each other symmetrically. The stria- tions

KSC00pp0514

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- A NASA helicopter hovers over the water while a high-impact-resistant flexible plastic bucket fills. The 324-gallon container will be used for fire protection on property and buildings at Kennedy Space Center. Known as the "Bambi" bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area

KSC00pp0517

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- A NASA helicopter releases the contents of the high-impact-resistant flexible plastic bucket it holds. The 324-gallon container will be used for fire protection on property and buildings at Kennedy Space Center. Known as the "Bambi" bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

KSC-00pp0517

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- A NASA helicopter releases the contents of the high-impact-resistant flexible plastic bucket it holds. The 324-gallon container will be used for fire protection on property and buildings at Kennedy Space Center. Known as the "Bambi" bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

KSC-00pp0512

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- Workers attach a high-impact-resistant flexible plastic bucket to a NASA helicopter. Holding 324 gallons of water, it will be used for fire protection on property and buildings at Kennedy Space Center. Known as the "Bambi" bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

KSC-00pp0514

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- A NASA helicopter hovers over the water while a high-impact-resistant flexible plastic bucket fills. The 324-gallon container will be used for fire protection on property and buildings at Kennedy Space Center. Known as the "Bambi" bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area

KSC00pp0512

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- Workers attach a high-impact-resistant flexible plastic bucket to a NASA helicopter. Holding 324 gallons of water, it will be used for fire protection on property and buildings at Kennedy Space Center. Known as the "Bambi" bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

What Do You Mean, No? Toddlers' Comprehension of Logical "No" and "Not"

ERIC Educational Resources Information Center

Feiman, Roman; Mody, Shilpa; Sanborn, Sophia; Carey, Susan

2017-01-01

For adults, "no" and "not" change the truth-value of sentences they compose with. To investigate children's emerging understanding of these words, an experimenter hid a ball in a bucket or a truck, then gave an affirmative or negative clue (Experiment 1: "It's not in the bucket"; Experiment 2: "Is it in the…

KSC-2014-4226

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, the crew of the NASA helicopter carefully lifts a Bambi Bucket from a canal near the Shuttle Landing Facility. Minutes later, the water was dropped on the target cones in the foreground, using techniques that would be employed to fight a brush fire at the Kennedy Space Center. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4225

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, the crew of the NASA helicopter carefully lifts a Bambi Bucket from a canal near the Shuttle Landing Facility. Minutes later, the water was dropped on the target cones in the foreground, using techniques that would be employed to fight a brush fire at the Kennedy Space Center. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

KSC-2014-4224

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, the crew of the NASA helicopter carefully lowers a Bambi Bucket into a canal near the Shuttle Landing Facility. Minutes later, the water was dropped on the target cones in the foreground, using techniques that would be employed to fight a brush fire at the Kennedy Space Center. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

DETAIL VIEW OF UPPER TRAM TERMINAL STRUCTURE, LOOKING SOUTH TOWARD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW OF UPPER TRAM TERMINAL STRUCTURE, LOOKING SOUTH TOWARD THE FRONT OF THE STRUCTURE. THE WHEELS AT THE TOP OF THE TRAM BUCKETS RODE OFF THE STATIONARY CABLES ONTO THE TRACK SUPPORTED BY THE "C" IRONS SUSPENDED FROM THE TOP TIMBERS ON THE LEFT AND RIGHT. THE BUCKET OPENING MECHANISM IS ON THE LEFT, AND PART OF THE CLOSING MECHANISM ON THE RIGHT EDGE OF THE FRAME. THE TWO CABLES AT CENTER ARE THE STATIONARY TRAM CABLES THAT RUN ALONG THE TOP OF THE SUPPORT TOWERS ON WHICH THE WHEELS OF THE TRAM BUCKETS RODE. THEY ARE ANCHORED AT GROUND LEVEL JUST OFF FRAME TO THE LOWER LEFT. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

Pulse pressure and nocturnal fall in blood pressure are predictors of vascular, cardiac and renal target organ damage in hypertensive patients (LOD-RISK study).

PubMed

García-Ortiz, Luis; Gómez-Marcos, Manuel A; Martín-Moreiras, Javier; González-Elena, Luis J; Recio-Rodriguez, Jose I; Castaño-Sánchez, Yolanda; Grandes, Gonzalo; Martínez-Salgado, Carlos

2009-08-01

To analyse the relationship between various parameters derived from ambulatory blood pressure monitoring (ABPM) and vascular, cardiac and renal target organ damage. A cross-sectional, descriptive study. It included 353 patients with short-term or recently diagnosed hypertension. ABPM, carotid intima-media thickness (IMT), Cornell voltage-duration product (Cornell VDP), glomerular filtration rate and albumin/creatinine ratio to assess vascular, cardiac and renal damage. Two hundred and twenty-three patients (63.2%) were males, aged 56.12+/-11.21 years. The nocturnal fall in blood pressure was 11.33+/-8.41, with a dipper pattern in 49.0% (173), nondipper in 30.3% (107), extreme dipper in 12.7% (45) and riser in 7.9% (28). The IMT was lower in the extreme dipper (0.716+/-0.096 mm) and better in the riser pattern (0.794+/-0.122 mm) (P<0.05). The Cornell VDP and albumin/creatinine ratio were higher in the riser pattern (1818.94+/-1798.63 mm/ms and 140.78+/-366.38 mg/g, respectively) than in the other patterns. In the multivariate analysis after adjusting for age, sex and antihypertensive treatment, with IMT as dependent variable the 24-h pulse pressure (beta = 0.003), with Cornell VDP the rest pulse pressure (beta = 12.04), and with the albumin/creatinine ratio the percentage of nocturnal fall in systolic blood pressure (beta = -3.59), the rest heart rate (beta = 1.83) and the standard deviation of 24-h systolic blood pressure (beta = 5.30) remain within the equation. The estimated pulse pressure with ABPM is a predictor of vascular and cardiac organ damage. The nocturnal fall and the standard deviation in 24-h systolic blood pressure measured with the ABPM is a predictor of renal damage.

The association between circulating endostatin and a disturbed circadian blood pressure pattern in patients with type 2 diabetes.

PubMed

Wuopio, Jonas; Östgren, Carl Johan; Länne, Toste; Lind, Lars; Ruge, Toralph; Carlsson, Axel C; Larsson, Anders; Nyström, Fredrik H; Ärnlöv, Johan

2018-02-28

Endostatin, cleaved from collagen XVIII in the extracellular matrix, is a promising circulating biomarker for cardiovascular damage. It possesses anti-angiogenic and anti-fibrotic functions and has even been suggested to be involved in blood pressure regulation. Less is known if endostatin levels relate to circadian blood pressure patterns. In the present paper we studied the association between circulating levels of endostatin and nocturnal dipping in blood pressure. We used the CARDIPP-study, a cohort of middle aged, type 2 diabetics (n = 593, 32% women), with data on both 24-hour and office blood pressure, serum-endostatin, cardiovascular risk factors, and incident major cardiovascular events. Nocturnal dipping was defined as a >10% difference between day- and night-time blood pressures. Two-hundred four participants (34%) were classified as non-dippers. The mean endostatin levels were significantly higher in non-dippers compared to dippers (mean ± standard deviation: 62.6 ± 1.8 µg/l vs. 58.7 ± 1.6 µg/l, respectively, p = .007). Higher serum levels of endostatin were associated with a diminished decline in nocturnal blood pressure adjusted for age, sex, HbA1c, mean systolic day blood pressure, hypertension treatment, glomerular filtration rate, and prevalent cardiovascular disease (regression coefficient per SD increase of endostatin -0.01, 95% CI, -0.02-(-0.001), p = .03). Structural equation modelling analyses suggest that endostatin mediates 7% of the association between non-dipping and major cardiovascular events. We found an independent association between higher circulating levels of endostatin and a reduced difference between day- and night-time systolic blood pressure in patients with type 2 diabetes. Yet endostatin mediated only a small portion of the association between non-dipping and cardiovascular events arguing against a clinical utility of our findings.

B-type natriuretic peptide is a determinant of the nocturnal increase in blood pressure independently of arterial hypertrophy and hypoxia.

PubMed

Tabara, Yasuharu; Igase, Michiya; Miki, Tetsuro; Ohyagi, Yasumasa; Matsuda, Fumihiko; Kohara, Katsuhiko

2016-12-01

Loss of the nocturnal blood pressure (BP) drop is a risk factor for cardiovascular outcomes. However, clinical parameters that predispose to changes in nocturnal BP are currently uncertain. Given the possible involvement of salt sensitivity in nocturnal BP levels, we investigated a hypothesized association between plasma B-type natriuretic peptide (BNP) levels - a marker of body fluid retention - and nocturnal BP in a general population. Study participants were 1020 general individuals. Participants were divided into four groups (riser, nondipper, dipper, and extreme dipper) by their percentage changes in nocturnal SBP measured using an ambulatory BP monitor. Plasma BNP levels were positively associated with circadian BP change (β = 0.162, P < 0.001) independently of carotid hypertrophy (β = 0.133, P < 0.001), and awake heart rate (β = -0.102, P = 0.001) and SBP (β = -0.246, P < 0.001). Risers showed 1.6 times higher BNP levels than dippers, whereas oxygen desaturation during sleep was frequently observed in nondippers. Results of multinomial logistic regression analysis indicated that BNP level was a significant determinant for the riser pattern [odds ratio (OR) 1.27 (BNP 10 pg/ml), P < 0.001], whereas oxygen desaturation was specifically associated with the nondipping pattern (OR 1.04, P = 0.001). When participants were subdivided by BNP level, risers were more frequent in the high BNP subgroup (19.5%) than in the low BNP subgroup (6.7%) (OR 3.39, P < 0.001). A slight increase in plasma BNP level was independently associated with rising nocturnal BP. Our results may help to understand the pathophysiology of circadian BP variation, and be a clue to identify individuals who require careful BP monitoring.

A generic framework for internet-based interactive applications of high-resolution 3-D medical image data.

PubMed

Liu, Danzhou; Hua, Kien A; Sugaya, Kiminobu

2008-09-01

With the advances in medical imaging devices, large volumes of high-resolution 3-D medical image data have been produced. These high-resolution 3-D data are very large in size, and severely stress storage systems and networks. Most existing Internet-based 3-D medical image interactive applications therefore deal with only low- or medium-resolution image data. While it is possible to download the whole 3-D high-resolution image data from the server and perform the image visualization and analysis at the client site, such an alternative is infeasible when the high-resolution data are very large, and many users concurrently access the server. In this paper, we propose a novel framework for Internet-based interactive applications of high-resolution 3-D medical image data. Specifically, we first partition the whole 3-D data into buckets, remove the duplicate buckets, and then, compress each bucket separately. We also propose an index structure for these buckets to efficiently support typical queries such as 3-D slicer and region of interest, and only the relevant buckets are transmitted instead of the whole high-resolution 3-D medical image data. Furthermore, in order to better support concurrent accesses and to improve the average response time, we also propose techniques for efficient query processing, incremental transmission, and client sharing. Our experimental study in simulated and realistic environments indicates that the proposed framework can significantly reduce storage and communication requirements, and can enable real-time interaction with remote high-resolution 3-D medical image data for many concurrent users.

Comparison of ambulatory blood pressure monitoring and office blood pressure measurements in obese children and adolescents.

PubMed

Renda, Rahime

2018-04-01

Obesity in adults has been related to hypertension and abnormal nocturnal dipping of blood pressure, which are associated with poor cardiovascular and renal outcomes. Here, we aimed to resolve the relationship between the degree of obesity, the severity of hypertension and dipping status on ambulatory blood pressure in obese children. A total 72 patients with primary obesity aged 7 to 18 years (mean: 13.48 ± 3.25) were selected. Patients were divided into three groups based on body mass index (BMİ) Z-score. Diagnosis and staging of ambulatory hypertension based on 24-h blood pressure measurements, obtained from ambulatory blood pressure monitoring. Based on our ambulatory blood pressure data, 35 patients (48.6%) had hypertension, 7 (20%) had ambulatory prehypertension, 21 (60%) had hypertension, and 7 patients (20%) had severe ambulatory hypertension. There was a significant relationship between severity of hypertension and the degree of obesity (p < 0.05). Thirty-one patients (88.6%) had isolated nighttime hypertension, and 53 patients (73.6%) were non-dippers. All systolic blood pressure results and loads were similar between groups. Diastolic and mean arterial blood pressure levels during the night, diastolic blood pressure loads, and heart rate during the day were significantly higher in Group 3 (p < 0.05). Nocturnal non-dipping was not associated with severity of obesity. Obesity was associated with severity of hypertension, higher diastolic blood pressure at night, mean arterial pressure at night, diastolic blood pressure loads and heart rate at day. Increase in BMI Z-score does not a significant impact on daytime blood pressure and nocturnal dipping status.

Assessment of measurement errors and dynamic calibration methods for three different tipping bucket rain gauges

USDA-ARS?s Scientific Manuscript database

Three different models of tipping bucket rain gauges (TBRs), viz. HS-TB3 (Hydrological Services Pty Ltd), ISCO-674 (Isco, Inc.) and TR-525 (Texas Electronics, Inc.), were calibrated in the lab to quantify measurement errors across a range of rainfall intensities (5 mm.h-1 to 250 mm.h-1) and three di...

A nondestructive trap for Dendroctonus frontalis Zimmerman (Coleoptera: Scolytidae)

Treesearch

John C. Moser; LLoyd E. Browne

1978-01-01

The bucket trap is a lightweight device for capturing southern pine beetles in flight and retaining them either alive or dead for later examination. It is not messy like the sticky trap and not cumbersome like conventional live traps. Placing the bucket against a vertical silhouette increases the number of beetles caught. Few nontarget insects are captured except for...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, John Zhiqiang

A gas turbine has buckets rotatable about an axis, the buckets having angel wing seals. The seals have outer and inner surfaces, at least one of which, and preferably both, extend non-linearly between root radii and the tip of the seal body. The profiles are determined in a manner to minimize the weight of the seal bodies, while maintaining the stresses below predetermined maximum or allowable stresses.

KSC-00pp0516

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- A NASA helicopter releases 324 gallons of water onto a building in a simulated fire control demonstration. The high-impact-resistant flexible plastic bucket will be used for fire protection on property and buildings at Kennedy Space Center. Known as the "Bambi" bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

KSC00pp0516

NASA Image and Video Library

2000-03-30

KENNEDY SPACE CENTER, FLA. -- A NASA helicopter releases 324 gallons of water onto a building in a simulated fire control demonstration. The high-impact-resistant flexible plastic bucket will be used for fire protection on property and buildings at Kennedy Space Center. Known as the "Bambi" bucket, it will also support the Fish and Wildlife Service for controlled burns plus any wild fires in the area.

70. DETAIL OF TRACTION CABLE ENGAGEMENT DEVICE. SMALL, KNOBBED LEVER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

70. DETAIL OF TRACTION CABLE ENGAGEMENT DEVICE. SMALL, KNOBBED LEVER ON BUCKET HANGER WAS PULLED DOWN BY A CAMEL (FIXED CAM RAIL AT CENTER) AS BUCKET ROLLED PAST IT, CAUSING A CLAMP TO CLOSE AGAINST TRACTION CABLE. A SIMILAR CAMEL (NO LONGER EXTANT) DISENGAGED CLAMP ON RECEIVING SIDE. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

Kicking the Bucket: It's All about Living

ERIC Educational Resources Information Center

Perry, Kekailoa

2013-01-01

In Hawai'i there is a myth known as the alamihi crab syndrome. The myth is a creation of foreign origin used to explain a Western worldview of Hawaiians. It is deployed to explain everything from the 1893 overthrow of the monarchy to the reason why Hawaiians can never better their lives. Crabs in a bucket have a tendency to struggle and fight to…

Double PCL sign does not always indicate a bucket-handle tear of medial meniscus.

PubMed

Liu, Chen; Zheng, Hua Yong; Huang, Yan; Li, Hai Peng; Wu, Han; Sun, Tian Sheng; Yao, Jian Hua

2016-09-01

The discoid medial meniscus is an extremely rare anomaly. Bilateral discoid medial menisci are much more rare but intermittently reported. We report the first case of bilateral discoid medial menisci with positive double PCL sign, which typically indicates a bucket-handle tear of medial meniscus. A literature review was also conducted on bilateral discoid medial menisci.

Sealing device

DOEpatents

Garcia-Crespo, Andres Jose

2013-12-10

A sealing device for sealing a gap between a dovetail of a bucket assembly and a rotor wheel is disclosed. The sealing device includes a cover plate configured to cover the gap and a retention member protruding from the cover plate and configured to engage the dovetail. The sealing device provides a seal against the gap when the bucket assemply is subjected to a centrifugal force.

Measuring water and sediment discharge from a road plot with a settling basin and tipping bucket

Treesearch

Thomas A. Black; Charles H. Luce

2013-01-01

A simple empirical method quantifies water and sediment production from a forest road surface, and is well suited for calibration and validation of road sediment models. To apply this quantitative method, the hydrologic technician installs bordered plots on existing typical road segments and measures coarse sediment production in a settling tank. When a tipping bucket...

Monitoring Mountain Meteorology without Much Money (Invited)

NASA Astrophysics Data System (ADS)

Lundquist, J. D.

2009-12-01

Mountains are the water towers of the world, storing winter precipitation in the form of snow until summer, when it can be used for agriculture and cities. However, mountain weather is highly variable, and measurements are sparsely distributed. In order adequately sample snow and climate variables in complex terrain, we need as many measurements as possible. This means that instruments must be inexpensive and relatively simple to deploy. Here, we demonstrate how dime-sized temperature sensors developed for the refrigeration industry can be used to monitor air temperature (using evergreen trees as radiation shields) and snow cover duration (using the diurnal cycle in near-surface soil temperature). Together, these measurements can be used to recreate accumulated snow water equivalent over the prior year. We also demonstrate how buckets of water may be placed under networked acoustic snow depth sensors to provide an index of daily evaporation rates at SNOTEL stations. (a) Temperature sensor sealed for deployment in the soil. (b) Launching a temperature sensor into a tree. (c) Pulley system to keep sensor above the snow. (a) Photo of bucket underneath acoustic snow depth sensor. (b) Water depth in the bucket as calculated by the snow depth sensor and by a pressure sensor inside the bucket.

Methods for disassembling, replacing and assembling parts of a steam cooling system for a gas turbine

DOEpatents

Wilson, Ian D.; Wesorick, Ronald R.

2002-01-01

The steam cooling circuit for a gas turbine includes a bore tube assembly supplying steam to circumferentially spaced radial tubes coupled to supply elbows for transitioning the radial steam flow in an axial direction along steam supply tubes adjacent the rim of the rotor. The supply tubes supply steam to circumferentially spaced manifold segments located on the aft side of the 1-2 spacer for supplying steam to the buckets of the first and second stages. Spent return steam from these buckets flows to a plurality of circumferentially spaced return manifold segments disposed on the forward face of the 1-2 spacer. Crossover tubes couple the steam supply from the steam supply manifold segments through the 1-2 spacer to the buckets of the first stage. Crossover tubes through the 1-2 spacer also return steam from the buckets of the second stage to the return manifold segments. Axially extending return tubes convey spent cooling steam from the return manifold segments to radial tubes via return elbows. The bore tube assembly, radial tubes, elbows, manifold segments and crossover tubes are removable from the turbine rotor and replaceable.

A Bibliometric Assessment of Global Ice Bucket Challenge (Amyotrophic Lateral Sclerosis) Research.

PubMed

Ram, Shri

2016-10-01

This study is a quantitative and qualitative assessment of the global research trends on amyotrophic lateral sclerosis (ALS) (popularly known as Ice Bucket Challenge), through related literatures retrieved from SCOPUS multidisciplinary database for the period 1974-2013. This study is aimed at analyzing the literature on ALS in terms of document type, language, annual growth, productive country, journal, authors, subject, and most cited articles. The bibliographic data for this study was retrieved from the SCOPUS database using keywords 'amyotrophic lateral sclerosis', 'motor neurone disease', 'Charcot disease', 'Lou Gehrig's disease', 'Ice Bucket Challenge' available in title, abstract, and keyword fields of Scopus database from 1974 to 2013. The literature analysis included 21,750 articles during the period from 1974 to 2013 in different areas of ALS. USA was the most productive country in terms of literature produced, while Neurology was the most productive journal. An intensive awareness created by 'Ice Bucket Challenge' has attracted masses, and an intensive growth of literature is pertinent on ALS. The results of this study are expressed in terms of growth of literature, output of individual countries, and authors, and will be helpful in collaborative research in future.

KSC-2014-4219

NASA Image and Video Library

2014-09-25

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, Mike Tillema, chief of Flight Operations in the Operations Support Division of NASA Center Operations, center, discusses plans for a training session to practice use of a Bambi Bucket in honing firefighting techniques. Bill Martin, a URS Federal Technical Services pilot in NASA Flight Operations, is on the left, with crew chief Mark Smith, also of URS. Firefighters respond to wildfires with teams on the ground and in the air. The most up-to-date tools include helicopters that use Bambi Buckets large quantities of water. NASA Flight Operations teams are training to perfect the skills needed to ensure they are ready to use tools, such as the Bambi Bucket, in the event of an out-of-control blaze at the spaceport. Photo credit: NASA/Frankie Martin

STS-26 Mission Insignia

NASA Technical Reports Server (NTRS)

1988-01-01

The predominant themes are: a new beginning (sunrise), a safe mission (stylized launch and plume), the building upon the traditional strengths of NASA (the red vector which symbolizes aeronautics on the original NASA insignia), and a remembrance of their seven colleagues who died aboard Challenger (the seven-starred Big Dipper). The patch was designed by artist Stephen R. Hustvedt of Annapolis, MD.

Space Shuttle Projects

NASA Image and Video Library

1988-06-21

The predominant themes are: a new beginning (sunrise), a safe mission (stylized launch and plume), the building upon the traditional strengths of NASA (the red vector which symbolizes aeronautics on the original NASA insignia), and a remembrance of their seven colleagues who died aboard Challenger (the seven-starred Big Dipper). The patch was designed by artist Stephen R. Hustvedt of Annapolis, MD.

102. DETAIL OF LEAD ROUGHER CELL INTERIOR. NOTE SEVERAL CELLS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

102. DETAIL OF LEAD ROUGHER CELL INTERIOR. NOTE SEVERAL CELLS COMBINED INTO ONE LARGER CELL FOR THIS STAGE, DIPPER FOR SAMPLING SLIME, AND TWO DIFFERENT STYLES OF GALIGHER "AGITAIR" FIXED BAFFLES AROUND AGITATOR. GALIGHER AGITATORS HAVE PADDLE BLADES ON BOTTOM OF DISKS. - Shenandoah-Dives Mill, 135 County Road 2, Silverton, San Juan County, CO

Voice of Experience: Little Square Pegs

ERIC Educational Resources Information Center

Day, Nicole

2013-01-01

The author got a bucket of water and a cloth and called her 3-year-old daughter, Gisella, to help her get things done. She had a "goal" in mind for her daughter; she wanted her to learn something simple like how to clean the table. But then she discovered that as Gisella dunked her little hand into the bucket, soapy water spilled over the edge. It…

Explicit modeling of groundwater-surface water interactions using a simple bucket-type model

NASA Astrophysics Data System (ADS)

Staudinger, Maria; Carlier, Claire; Brunner, Philip; Seibert, Jan

2017-04-01

Longer dry spells can become critical for water supply and groundwater dependent ecosystems. During these dry spells groundwater is often the most relevant source for streams. Hence, the hydrological behavior of a catchment is often dominated by groundwater surface water interactions, which can vary considerably in space and time. While classical hydrological approaches hardly consider this spatial dependence, quantitative, hydrogeological modeling approaches can couple surface runoff processes and groundwater processes. Hydrogeological modeling can help to gain an improved understanding of catchment processes during low flow. However, due to their complex parametrization and large computational requirements, such hydrogeological models are difficult to employ at catchment scale, particularly for a larger set of catchments. Then bucket-type hydrological models remain a practical alternative. In this study we combine the strengths of both the hydrogeological and bucket-type hydrological models to better understand low flow processes and ultimately to use this knowledge for low flow projections. Bucket-type hydrological models have traditionally not been developed with focus on the simulation of low flow. One consequence is that interactions between surface and groundwater are not explicitly considered. Water fluxes in bucket-type hydrological models are commonly simulated only in one direction, namely from the groundwater to the stream but not from the stream to the groundwater. This latter flux, however, can become more important during low flow situations. We therefore further developed the bucket-type hydrological model HBV to simulate low flow situations by allowing for exchange in both directions i.e. also from the stream to the groundwater. The additional HBV exchange box is developed by using a variety of synthetic hydrogeological models as training set that were generated using a fully coupled, physically based hydrogeological model. In this way processes that occur in different spatial settings within the catchment are translated to functional relationships and effective parameter values for the conceptual exchange box can be extracted. Here, we show the development and evaluation of the HBV exchange box. We further show a first application in real catchments and evaluate the model performance by comparing the simulations to benchmark models that do not consider groundwater surface water interaction.

Repeated Short-term (2h×14d) Emotional Stress Induces Lasting Depression-like Behavior in Mice.

PubMed

Kim, Kyoung-Shim; Kwon, Hye-Joo; Baek, In-Sun; Han, Pyung-Lim

2012-03-01

Chronic behavioral stress is a risk factor for depression. To understand chronic stress effects and the mechanism underlying stress-induced emotional changes, various animals model have been developed. We recently reported that mice treated with restraints for 2 h daily for 14 consecutive days (2h-14d or 2h×14d) show lasting depression-like behavior. Restraint provokes emotional stress in the body, but the nature of stress induced by restraints is presumably more complex than emotional stress. So a question remains unsolved whether a similar procedure with "emotional" stress is sufficient to cause depression-like behavior. To address this, we examined whether "emotional" constraints in mice treated for 2h×14d by enforcing them to individually stand on a small stepping platform placed in a water bucket with a quarter full of water, and the stress evoked by this procedure was termed "water-bucket stress". The water-bucket stress activated the hypothalamus-pituitary-adrenal gland (HPA) system in a manner similar to restraint as evidenced by elevation of serum glucocorticoids. After the 2h×14d water-bucket stress, mice showed behavioral changes that were attributed to depression-like behavior, which was stably detected >3 weeks after last water-bucket stress endorsement. Administration of the anti-depressant, imipramine, for 20 days from time after the last emotional constraint completely reversed the stress-induced depression-like behavior. These results suggest that emotional stress evokes for 2h×14d in mice stably induces depression-like behavior in mice, as does the 2h×14d restraint.

The bucket and the searchlight: formulating and testing risk hypotheses about the weediness and invasiveness potential of transgenic crops.

PubMed

Raybould, Alan

2010-01-01

The bucket and the searchlight are metaphors for opposing theories of the growth of scientific knowledge. The bucket theory proposes that knowledge is gained by observing the world without preconceptions, and that knowledge emerges from the accumulation of observations that support a hypothesis. There are many problems with this theory, the most serious of which is that it does not appear to offer a means to distinguish between the many hypotheses that could explain a particular set of observations. The searchlight theory proposes that preconceptions are unavoidable and that knowledge advances through the improvement of our preconceptions - our hypotheses - by continuous criticism and revision. A hypothesis is a searchlight that illuminates observations that test the hypothesis and reveal its flaws, and knowledge thereby increases through the elimination of false hypotheses. Research into the risks posed by the cultivation of transgenic crops often appears to apply the bucket theory; many data are produced, but knowledge of risk is not advanced. Application of the searchlight theory, whereby risk assessments test hypotheses that transgenic crops will not be harmful, seems to offer a better way to characterise risk. The effectiveness of an environmental risk assessment should not be measured by the size of the bucket of observations on a transgenic crop, but by the power of the risk hypothesis searchlights to clarify the risks that may arise from cultivation of that crop. These points are illustrated by examples of hypotheses that could be tested to assess the risks from transgenic crops and their hybrids becoming weeds or invading non-agricultural habitats. © ISBR, EDP Sciences, 2011.

An environmentally friendly and cost effective technique for the commercial cultivation of oyster mushroom [Pleurotus florida (Mont.) Singer].

PubMed

Panjikkaran, Seeja Thomachan; Mathew, Deepu

2013-03-15

The existing protocol for the cultivation of oyster mushroom (Pleurotus florida) in polyethylene bags leads to environmental pollution amounting to 18 g of polyethylene per 450 g of mushroom, which is the average biological efficiency achieved from a bag. Thus the projected annual global pollution amounts to 2 million tones, corresponding to the production of 48 million tones. Experiments were conducted at Kerala Agricultural University, India, to formulate an oyster mushroom cultivation strategy that reduces this pollution level. Pooled results of experiments at the institute's and farmers' units have shown that reusable plastic buckets having perforations of 1.5 cm × 1.0 cm throughout the side walls could be used to substitute polyethylene bags, while following the standard cultivation protocols. Cultivation in perforated buckets has recorded a biological efficiency of 435.69 ± 56.75 g in 47.07 ± 5.22 days against 459.11 ± 53.52 g in 38.05 ± 4.54 days in polyethylene bags. The rate of contamination in buckets was significantly lower than that in bags: 9.28 ± 2.12 and 12.60 ± 3.73% respectively. Reusable plastic buckets with perforations on the side walls could be used to substitute the conventional polyethylene bags in oyster mushroom cultivation, with no significant difference in yield. Losses due to slight increase in crop duration in buckets will be compensated with a lower rate of contamination. For a unit having a daily output of 100 kg, it was estimated that during 10 years of permanent cultivation following this technique, the cost of cultivation could be reduced to one-tenth and the environmental pollution reduced by at least 730 000 non-degradable polyethylene bags. © 2012 Society of Chemical Industry.

A Prototype Bucket Wheel Excavator for the Moon, Mars and Phobos

NASA Astrophysics Data System (ADS)

Muff, T.; Johnson, L.; King, R.; Duke, M. B.

2004-02-01

Excavation of surface regolith material is the first step in processes to extract volatile materials from planetary surface regolith for the production of propellant and life support consumables. Typically, concentrations of volatiles are low, so relatively large amounts of material must be excavated. A bucket wheel excavator is proposed, which has the capability of continuous excavation, which is readily adapted to granular regolith materials as found on the Moon, in drift deposits on Mars, and probably on the surface of asteroids and satellites, such as Phobos. The bucket wheel excavator is relatively simple, compared to machines such as front end loaders. It also has the advantage that excavation forces are principally horizontal rather than vertical, which minimizes the need for excavator mass and suits it to operations in reduced gravity fields. A prototype small bucket wheel excavator has been built at approximately the scale of the rovers that are carried to Mars on the Mars Exploration Rover Mission. The prototype allows the collection of data on forces exerted and power requirements for excavation and will provide data on which more efficient designs can be based. At excavation rates in the vicinity of one rover mass of material excavated per hour, tests of the prototype demonstrate that the power required is largely that needed to operate the excavator hardware and not related strongly to the amount of material excavated. This suggests that the excavation rate can be much larger for the same excavation system mass. Work on this prototype is continuing on the details of transfer of material from the bucket wheel to an internal conveyor mechanism, which testing demonstrated to be problematic in the current design.

Energy dissipation of slot-type flip buckets

NASA Astrophysics Data System (ADS)

Wu, Jian-hua; Li, Shu-fang; Ma, Fei

2018-03-01

The energy dissipation is a key index in the evaluation of energy dissipation elements. In the present work, a flip bucket with a slot, called the slot-type flip bucket, is theoretically and experimentally investigated by the method of estimating the energy dissipation. The theoretical analysis shows that, in order to have the energy dissipation, it is necessary to determine the sequent flow depth h 1 and the flow speed V 1 at the corresponding position through the flow depth h 2 after the hydraulic jump. The relative flow depth h 2 / h 。 is a function of the approach flow Froude number Fr 。, the relative slot width b/B 。, and the relative slot angle θ/β. The expression for estimating the energy dissipation is developed, and the maximum error is not larger than 9.21%.

Energy dissipation of slot-type flip buckets

NASA Astrophysics Data System (ADS)

Wu, Jian-hua; Li, Shu-fang; Ma, Fei

2018-04-01

The energy dissipation is a key index in the evaluation of energy dissipation elements. In the present work, a flip bucket with a slot, called the slot-type flip bucket, is theoretically and experimentally investigated by the method of estimating the energy dissipation. The theoretical analysis shows that, in order to have the energy dissipation, it is necessary to determine the sequent flow depth h 1 and the flow speed V 1 at the corresponding position through the flow depth h 2 after the hydraulic jump. The relative flow depth h 2 / h o is a function of the approach flow Froude number Fr o, the relative slot width b/ B o, and the relative slot angle θ/ β. The expression for estimating the energy dissipation is developed, and the maximum error is not larger than 9.21%.

Cooling system for a gas turbine

DOEpatents

Wilson, Ian David; Salamah, Samir Armando; Bylina, Noel Jacob

2003-01-01

A plurality of arcuate circumferentially spaced supply and return manifold segments are arranged on the rim of a rotor for respectively receiving and distributing cooling steam through exit ports for distribution to first and second-stage buckets and receiving spent cooling steam from the first and second-stage buckets through inlet ports for transmission to axially extending return passages. Each of the supply and return manifold segments has a retention system for precluding substantial axial, radial and circumferential displacement relative to the rotor. The segments also include guide vanes for minimizing pressure losses in the supply and return of the cooling steam. The segments lie substantially equal distances from the centerline of the rotor and crossover tubes extend through each of the segments for communicating steam between the axially adjacent buckets of the first and second stages, respectively.

Cooling circuit for and method of cooling a gas turbine bucket

DOEpatents

Jacala, Ariel C. P.

2002-01-01

A closed internal cooling circuit for a gas turbine bucket includes axial supply and return passages in the dovetail of the bucket. A first radial outward supply passage provides cooling medium to and along a passageway adjacent the leading edge and then through serpentine arranged passageways within the airfoil to a chamber adjacent the airfoil tip. A second radial passage crosses over the radial return passage for supplying cooling medium to and along a pair of passageways along the trailing edge of the airfoil section. The last passageway of the serpentine passageways and the pair of passageways communicate one with the other in the chamber for returning spent cooling medium radially inwardly along divided return passageways to the return passage. In this manner, both the leading and trailing edges are cooled using the highest pressure, lowest temperature cooling medium.

Bucket platform cooling scheme and related method

DOEpatents

Abuaf, Nesim; Barb, Kevin Joseph; Chopra, Sanjay; Kercher, David Max; Kellock, Iain Robertson; Lenahan, Dean Thomas; Nellian, Sankar; Starkweather, John Howard; Lupe, Douglas Arthur

2002-01-01

A turbine bucket includes an airfoil extending from a platform, having high and low pressure sides; a wheel mounting portion; a hollow shank portion located radially between the platform and the wheel mounting portion, the platform having an under surface. An impingement cooling plate is located in the hollow shank portion, spaced from the under surface, and the impingement plate is formed with a plurality of impingement cooling holes therein.

Building Multi-Discipline, Multi-Format Digital Libraries Using Clusters and Buckets. Degree rewarded by Old Dominion Univ. on Aug. 1997

NASA Technical Reports Server (NTRS)

Nelson, Michael L.

1997-01-01

Our objective was to study the feasibility of extending the Dienst protocol to enable a multi-discipline, multi-format digital library. We implemented two new technologies: cluster functionality and publishing buckets. We have designed a possible implementation of clusters and buckets, and have prototyped some aspects of the resultant digital library. Currently, digital libraries are segregated by the disciplines they serve (computer science, aeronautics, etc.), and by the format of their holdings (reports, software, datasets, etc.). NCSTRL+ is a multi-discipline, multi-format digital library (DL) prototype created to explore the feasibility of the design and implementation issues involved with created a unified, canonical scientific and technical information (STI) DL. NCSTRL+ is based on the Networked Computer Science Technical Report Library (NCSTRL), a World Wide Web (WWW) accessible DL that provides access to over 80 university departments and laboratories. We have extended the Dienst protocol (version 4.1.8), the protocol underlying NCSTRL, to provide the ability to cluster independent collections into a logically centralized DL based upon subject category classification, type of organization, and genre of material. The concept of buckets provides a mechanism for publishing and managing logically linked entities with multiple data formats.

75 FR 36673 - Notice of Inventory Completion: Public Museum of West Michigan, Grand Rapids, MI

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-28

... red ochre, 1 shell bracelet, 1 lot of bird bone, 1 flint flake, and 1 projectile point fragment. At an... 33 associated funerary objects are 1 Busycon shell dipper, 16 lots of bone awls and fragments, 1... lots of polished bone, 1 pottery vessel, and 1 lot of turtle carapace fragments. In 1879, human remains...

Native Skywatchers and the Makoc&dotbelow;e Wic&dotbelow;aŋḣpi Wowapi—D(L)akota Star Map—Building Community Around Native Star Knowledge

NASA Astrophysics Data System (ADS)

Lee, A. S.; Rock, J.

2014-07-01

In D(L)akota the Big Dipper is known as To/ToŋWiŋ—Blue/Birth Woman. She lives at the center of the scoop in the Big Dipper and is the door keeper between the star world and the Earth. The same group of seven bright stars is also known as Wịakiyuhapi, the Stretcher, and Waṡihdapi/Waṡiglapi, the Mourners. This is the beginning of the journey back into the spirit world for those leaving the Earth. Embedded in the native constellations are teachings that help guide and inspire native peoples. This workshop will present the D(L)akota Star Map and constellations of the current night sky. The Native Skywatchers research and programming seeks out elders, culture teachers, and community members to discuss the Ojibwe and D(L)akota star knowledge. Together we have created Makoc&dotbelow;e Wic&dotbelow;aŋḣpi Wowapi—D(L)akota Star Map. This map and related curriculum was published and disseminated to regional educators at our Native Skywatchers Middle School Teacher workshops in June 2012 and 2013. We are building community around the native star knowledge.

Identification of Young Stellar Variables with KELT for K2 . I. Taurus Dippers and Rotators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodriguez, Joseph E.; Cargile, Phillip A.; Ansdell, Megan

One of the most well-studied young stellar associations, Taurus–Auriga, was observed by the extended Kepler mission, K2 , in the spring of 2017. K2 Campaign 13 (C13) is a unique opportunity to study many stars in this young association at high photometric precision and cadence. Using observations from the Kilodegree Extremely Little Telescope (KELT) survey, we identify “dippers,” aperiodic and periodic variables among K2 C13 target stars. This release of the KELT data (light curve data in e-tables) provides the community with long-time baseline observations to assist in the understanding of the more exotic variables in the association. Transient-like phenomenamore » on timescales of months to years are known characteristics in the light curves of young stellar objects, making contextual pre- and post- K2 observations critical to understanding their underlying processes. We are providing a comprehensive set of the KELT light curves for known Taurus–Auriga stars in K2 C13. The combined data sets from K2 and KELT should permit a broad array of investigations related to star formation, stellar variability, and protoplanetary environments.« less

The relationship between a blunted morning surge and a reversed nocturnal blood pressure dipping or "riser" pattern.

PubMed

Fujiwara, Takeshi; Tomitani, Naoko; Sato, Keiko; Okura, Ayako; Suzuki, Noriyuki; Kario, Kazuomi

2017-11-01

The authors sought to determine the association between the blunted morning blood pressure (BP) surge and nocturnal BP dipping of the "riser" pattern in 501 patients with hypertension enrolled in the ACHIEVE-ONE (Ambulatory Blood Pressure Control and Home Blood Pressure [Morning and Evening] Lowering by the N-Channel Blocker Cilnidipine) trial. The patients' sleep-trough morning BP surge and prewaking surge were calculated and then classified according to their nocturnal systolic BP reduction pattern as extreme dippers, dippers, nondippers, and risers. The prevalence of the riser pattern was significantly higher in both the lowest sleep-trough morning BP surge decile and the prewaking surge decile (blunted surge group) compared with the remaining deciles (56.0% vs 10.4% [P<.0001] and 59.2% vs 10.2% [P<.0001], respectively). The riser pattern was a significant determinant of both blunted sleep-trough morning BP surge (odds ratio, 73.3; P<.0001) and blunted prewaking surge (odds ratio, 14.8; P<.0001). The high prevalence of the riser pattern in patients with blunted morning BP surges may account for the cardiovascular risk previously reported in such patients. ©2017 Wiley Periodicals, Inc.

Modernization of Deployable Airfield Debris Removal Equipment

DTIC Science & Technology

2017-04-01

cleared the debris away from the crater by lowering the front bucket and setting the bottom blade at a 45-deg angle. The debris was pushed...the Komatsu WA 150 baseline loader. The crater clearing process involved the loader orienting the bucket blade at approximately 45 deg to the...wider than the track’s width (Figure 30). This caused debris to run under the track and lift the equipment, potentially throwing the operator. The final

Gas turbine bucket with impingement cooled platform

DOEpatents

Jones, Raphael Durand

2002-01-01

In a turbine bucket having an airfoil portion and a root portion, with a substantially planar platform at an interface between the airfoil portion and root portion, a platform cooling arrangement including at least one bore in the root portion and at least one impingement cooling tube seated in the bore, the tube extending beyond the bore with an outlet in close proximity to a targeted area on an underside of the platform.

A Multi-Discipline, Multi-Genre Digital Library for Research and Education

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Shen, Stewart N. T.

2004-01-01

We describe NCSTRL+, a unified, canonical digital library for educational and scientific and technical information (STI). NCSTRL+ is based on the Networked Computer Science Technical Report Library (NCSTRL), a World Wide Web (WWW) accessible digital library (DL) that provides access to over 100 university departments and laboratories. NCSTRL+ implements two new technologies: cluster functionality and publishing "buckets". We have extended the Dienst protocol, the protocol underlying NCSTRL, to provide the ability to "cluster" independent collections into a logically centralized digital library based upon subject category classification, type of organization, and genres of material. The concept of "buckets" provides a mechanism for publishing and managing logically linked entities with multiple data formats. The NCSTRL+ prototype DL contains the holdings of NCSTRL and the NASA Technical Report Server (NTRS). The prototype demonstrates the feasibility of publishing into a multi-cluster DL, searching across clusters, and storing and presenting buckets of information.

Gas turbine coatings eddy current quantitative and qualitative evaluation

NASA Astrophysics Data System (ADS)

Ribichini, Remo; Giolli, Carlo; Scrinzi, Erica

2017-02-01

Gas turbine blades (buckets) are among the most critical and expensive components of the engine. Buckets rely on protective coatings in order to withstand the harsh environment in which they operate. The thickness and the microstructure of coatings during the lifespan of a unit are fundamental to evaluate their fitness for service. A frequency scanning Eddy Current instrument can allow the measurement of the thickness and of physical properties of coatings in a Non-Destructive manner. The method employed relies on the acquisition of impedance spectra and on the inversion of the experimental data to derive the coating properties and structure using some assumptions. This article describes the experimental validation performed on several samples and real components in order to assess the performance of the instrument as a coating thickness gage. The application of the technique to support residual life assessment of serviced buckets is also presented.

High intensity single bunch operation with heavy periodic transient beam loading in wide band rf cavities

NASA Astrophysics Data System (ADS)

Tamura, Fumihiko; Hotchi, Hideaki; Schnase, Alexander; Yoshii, Masahito; Yamamoto, Masanobu; Ohmori, Chihiro; Nomura, Masahiro; Toda, Makoto; Shimada, Taihei; Hasegawa, Katsushi; Hara, Keigo

2015-09-01

The rapid cycling synchrotron (RCS) in the Japan Proton Accelerator Research Complex (J-PARC) was originally designed to accelerate two high intensity bunches, while some of neutron experiments in the materials and life science experimental facility and a muon experiment using main ring beams require a single bunch operation mode, in which one of the two rf buckets is filled and the other is empty. The beam intensity in the single bunch operation has been limited by longitudinal beam losses due to the rf bucket distortions by the wake voltage of the odd harmonics (h =1 ,3 ,5 ) in the wide band magnetic alloy cavities. We installed an additional rf feedforward system to compensate the wake voltages of the odd harmonics (h =1 ,3 ,5 ). The additional system has a similar structure as the existing feedforward system for the even harmonics (h =2 ,4 ,6 ). We describe the function of the feedforward system for the odd harmonics, the commissioning methodology, and the commissioning results. The longitudinal beam losses during the single bunch acceleration disappeared with feedforward for the odd harmonics. We also confirmed that the beam quality in the single bunch acceleration are similar to that of the normal operation with two bunches. Thus, high intensity single bunch acceleration at the intensity of 2.3 ×1013 protons per bunch has been achieved in the J-PARC RCS. This article is a follow-up of our previous article, Phys. Rev. ST Accel. Beams 14, 051004 (2011). The feedforward system extension for single bunch operation was successful.

Updated Distribution Records for Anopheles vagus (Diptera: Culicidae) in the Republic of Philippines, and Considerations Regarding Its Secondary Vector Roles in Southeast Asia

DTIC Science & Technology

2011-01-01

larvae were collected from three habitats (rice fields, irrigation ditches and drainage ditches) in Laguna Province in July 2002 using a plastic dipper ...Wilkerson et al. (2003). The rDNA ITS2 was amplified, and polymerase chain reaction (PCR) products were directly sequenced using Big Dye 3.0 (Applied

Analysis of German Patent Literature

DTIC Science & Technology

2012-08-01

the entities that are pictured in the gures, as they are likely to be important parts of the patent. Chunking is not a big source of errors - most...document groups, where the documents need not be exact translations. 21 Bibliography [1] Sabine Brants, Stefanie Dipper , Silvia Hansen, Wolfgang Lezius...mit ] A big sh [ übersetzt] ITJ Interjektion interjection mhm, ach, tja KOUI unterordnende Konjunktion mit zu und Innitiv subordinating conjunction

Newton’s Rotating Water Bucket: A Simple Model

DTIC Science & Technology

2013-01-01

surface of the water must be an equipotential relative to the sum of the gravitational and centrifugal potential energies [9].) The value of z0 can be...twisted and the bucket is then released, it begins to spin and the surface of the water acquires a paraboloidal shape. In this paper, the parabolic...adopts a curved surface . Ernst Mach, for example, postulated that the parabolic shape must be due to the existence of matter in the universe

Undersea Pipelines and Cables in Polar Water,

DTIC Science & Technology

1978-09-01

problems 4 Public or military utilities. Local distribu- exist in the following geographical areas. tion systems for gas, water, or refined liquid 1...and to stabilize the barge with the heaped capacity of the bucket (which is some system of legs, spuds or anchors To greater than the actual volume...monograph on (uttm Kg tools (Mellor 1977) row buckets, the force per unit width may be up It may differ from terms used by backhoe manufaturer or to

Level II Documentation of Launch Complex 31/32, Cape Canaveral Air Force Station, Florida

DTIC Science & Technology

2008-12-01

a mobile launcher tied down on the concrete pad, with a concrete flame bucket descending off one side of the surface area (Figure...pedestal (Figure 9). The complex’s Launch Pad 10 was a hex- agonal reinforced concrete surface with tie down points and a concrete flame bucket at its...fuel propel- lant.126 This allowed for rapid deployment, and for a more effective and less expensive weapon system . Technological advancements

Evaluation of the dynamic behavior of a Pelton runner based on strain gauge measurements

NASA Astrophysics Data System (ADS)

Mack, Reiner; Probst, Christian

2016-11-01

A reliable mechanical design of Pelton runners is very important in the layout of new installations and modernizations. Especially in horizontal machines, where the housing is not embedded into concrete, a rupture of a runner bucket can have severe consequences. Even if a crack in the runner is detected on time, the outage time that follows the malfunction of the runner is shortening the return of investment. It is a fact that stresses caused by the runner rotation and the jet forces are superposed by high frequent dynamic stresses. In case of resonance it even can be the dominating effect that is limiting the lifetime of a runner. Therefore a clear understanding of the dynamic mechanisms is essential for a safe runner design. This paper describes the evaluation of the dynamic behavior of a Pelton runner installed in a model turbine based on strain gauge measurements. Equipped with strain gauges at the root area of the buckets, the time responses of the strains under the influence of various operational parameters were measured. As a result basic theories for the jet bucket excitation were verified and the influence of the water mass was detected by evaluating the frequency shift in case of resonance. Furthermore, the influence of the individual bucket masses onto the dynamic behaviour for different mode shapes got measured.

A reference pelton turbine - design and efficiency measurements

NASA Astrophysics Data System (ADS)

Solemslie, Bjørn W.; Dahlhaug, Ole G.

2014-03-01

The Pelton turbine has been subject to a varying degree of research interest since the debut of the technology over a century ago. Despite its age there are gaps in the knowledge concerning the flow mechanisms effecting the flow through the turbine. A Pelton turbine has been designed at the Waterpower Laboratory at NTNU. This has been done in connection to a Ph.D. project focusing on the flow in Pelton turbine buckets. The design of the turbine has been conducted using in-house knowledge in addition to some comments from a turbine producer. To describe the geometry multiple Bezier curves were used and the design strategy aimed to give a smooth and continuous gradient along the main flow directions in the bucket. The turbine has been designed for the operational conditions of the Pelton test rig installed at the Waterpower Laboratory which is a horizontal single jet test rig with a jet diameter(ds) of 35 mm. The diameter(D) of the runner was set to 513 mm and the width(W) of a bucket 114 mm, leading to a D/W ratio of 4.5. Manufacturing of the turbine has been carried out in aluminium and the turbine has undergone efficiency testing and visual inspection during operation at a head of 70 m. The turbine did not performed as expected and the maximum efficiency was found to be 77.75%. The low efficiency is mainly caused by a large amount of water leaving the bucket through the lip and hence transferring close to zero of its energy to the shaft. The reason for the large lip loss is discussed and two possible causes are found; the jet is located too close to the lip, and the inner surface of the bucket does not lead the water away from the lip. The turbine geometry and all data from both measurements and simulations will be available upon request in an effort to increase the amount of available data concerning Pelton turbines.

The extended TRIP supporting VoIP routing reservation with distributed QoS

NASA Astrophysics Data System (ADS)

Wang, Furong; Wu, Ye

2004-04-01

In this paper, an existing protocol, i.e. TRIP (Telephony Routing over IP) is developed to provide distributed QoS when making resource reservations for VoIP services such as H.323, SIP. Enhanced LSs (location servers) are deployed in ITADs (IP Telephony Administrative Domains) to take in charge of intra-domain routing policy because of small propagation price. It is an easy way to find an IP telephone route for intra-domain VoIP media association and simultaneously possess intra-domain load balancing features. For those routing reservations bridging domains, inter-domain routing policy is responsible for finding the shortest inter-domain route with enough resources. I propose the routing preference policy based on QoS price when the session traffic is shaped by a token bucket, related QoS messages, and message cooperation.

TOP VIEW OF UPPER TRAM TERMINAL, PRIMARY ORE BIN, AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

TOP VIEW OF UPPER TRAM TERMINAL, PRIMARY ORE BIN, AND ORE CHUTE,LOOKING SOUTHWEST. TRAM MACHINERY AND GEARS ARE AT LOWER CENTER. A SMALL ELECTRIC MOTOR AT THE REAR LEFT OF THE TERMINAL PROBABLY WAS ADDED AFTER THE ORIGINAL CONSTRUCTION. THE MOVING CABLE OF THE TRAM WAS DRIVEN BY THESE GEARS AND THE LARGE WHEEL UNDERNEATH (SEE CA-291-31 FOR DETAIL). EMPTY TRAM BUCKETS CAME IN FROM THE LEFT, SWINGING AROUND TO THE CHUTES FROM THE ORE BIN TO BE LOADED FOR THE TRIP DOWN TO THE MILL (SEE CA-291-35 FOR DETAIL). THE BREAK OVER TOWER CAN BE SEEN IN THE DISTANCE AT TOP LEFT. THE SUPPORT TOWER BETWEEN THE UPPER TERMINAL AND THE BREAK OVER TOWER IS COLLAPSED. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

Prediction of Scour below Flip Bucket using Soft Computing Techniques

NASA Astrophysics Data System (ADS)

Azamathulla, H. Md.; Ab Ghani, Aminuddin; Azazi Zakaria, Nor

2010-05-01

The accurate prediction of the depth of scour around hydraulic structure (trajectory spillways) has been based on the experimental studies and the equations developed are mainly empirical in nature. This paper evaluates the performance of the soft computing (intelligence) techiques, Adaptive Neuro-Fuzzy System (ANFIS) and Genetic expression Programming (GEP) approach, in prediction of scour below a flip bucket spillway. The results are very promising, which support the use of these intelligent techniques in prediction of highly non-linear scour parameters.

Motivations behind donations for health-related organizations: Threat appraisal and coping appraisal-the case of the ALS Ice Bucket Challenge.

PubMed

Li, Jo-Yun; Wen, Jing

2017-01-01

This study explores the influence of social media involvement and other factors on individuals' donation intentions in the context of the ALS Ice Bucket Challenge. An online survey with 306 participants revealed that social media involvement had a direct effect on intentions to contribute donations and had an indirect effect that was mediated by the response efficacy on intentions after controlling for individuals' issue involvement with the disease.

27. VIEW FROM AFT OF MAIN HOISTING ENGINE WITH HOISTING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. VIEW FROM AFT OF MAIN HOISTING ENGINE WITH HOISTING DRUM IN FOREGROUND. NOTE MAIN HOISTING DRUM IS A STEP DRUM, WITH TWO DIAMETERS ON DRUM. WHEN BUCKET IS IN WATER THE CABLE IS ON THE SMALLER STEP, AS PICTURED, GIVING MORE POWER TO THE LINE. THE CABLE STEPS TO LARGER DIAMETER WHEN BUCKET IS OUT OF WATER, WHERE SPEED IS MORE IMPORTANT THAN POWER. SMALLER BACKING DRUM IN BACKGROUND. - Dredge CINCINNATI, Docked on Ohio River at foot of Lighthill Street, Pittsburgh, Allegheny County, PA

Feasibility of High Energy Lasers for Interdiction Activities

DTIC Science & Technology

2017-12-01

2.3.2 Power in the Bucket Another parameter we will use in this study is the power-in-the-bucket. The “bucket” is defined as the area on the target we...the heat diffusion equation for a one -dimensional case (where the x-direction is into the target) and assuming a semi-infinite slab of material. The... studied and modeled. One of the approaches to describe these interactions is by making a one -dimensional mathematical model assuming [8]: 1. A semi

Cardioprotective effects of SGLT2 inhibitors are possibly associated with normalization of the circadian rhythm of blood pressure.

PubMed

Rahman, Asadur; Hitomi, Hirofumi; Nishiyama, Akira

2017-06-01

Improvement in cardiovascular (CV) morbidity and mortality in the EMPA-REG OUTCOME study provides new insight into the therapeutic use of sodium-dependent glucose cotransporter 2 (SGLT2) inhibitors in patients with type 2 diabetes. Although SGLT2 inhibitors have several pleiotropic effects, the underlying mechanism responsible for their cardioprotective effects remains undetermined. In this regard, the absence of a nocturnal fall in blood pressure (BP), that is, non-dipping BP, is a common phenomenon in type 2 diabetes and has a crucial role in the pathogenesis of CV morbidity and mortality. In most clinical trials, SGLT2 inhibitors reduce both systolic BP (~3-5 mm Hg) and diastolic BP (~2 mm Hg) in patients with type 2 diabetes. In addition, recent clinical and animal studies have revealed that SGLT2 inhibitors enable the change in BP circadian rhythm from a non-dipper to a dipper type, which is possibly associated with the improvement in CV outcomes in patients with type 2 diabetes. In this review, recent data on the effect of SGLT2 inhibitors on the circadian rhythm of BP will be summarized. The possible underlying mechanisms responsible for the SGLT2 inhibitor-induced improvement in the circadian rhythm of BP will also be discussed.

Rotigotine Improves Abnormal Circadian Rhythm of Blood Pressure in Parkinson's Disease.

PubMed

Oka, Hisayoshi; Nakahara, Atuso; Umehara, Tadashi

2018-05-15

Cardiovascular autonomic failure is commonly associated with Parkinson's disease (PD), affecting the daily lives of patients. Rotigotine was recently reported not to influence cardiovascular autonomic responses in contrast to other dopaminergic drugs. The effect of rotigotine on daily blood pressure (BP) fluctuations might reflect autonomic failure in patients with PD. Twenty-five PD patients who were receiving rotigotine and 12 patients not receiving rotigotine were recruited. Systolic BP during the daytime and nighttime was measured by 24-h BP monitoring at an interval of 2 years. The patients were divided into 3 groups according to the BP fluctuation type: dippers (nocturnal fall in BP ≥10%), non-dippers (0-10%), and risers (< 0%). The time course of BP was compared between the patients given rotigotine and those not given rotigotine. Among the 25 patients who received rotigotine, the BP type worsened in 2 patients, was unchanged in 16 patients, and improved in 7 patients. Among the 12 patients who were not receiving rotigotine, the BP type worsened in 5 patients, was unchanged in 4 patients, and improved only in 3 patients (p = 0.042). Rotigotine improves the abnormal circadian rhythm of BP in patients with PD. Rotigotine was suggested to have favorable effects on cardiovascular autonomic responses and circadian rhythm in patients with PD. © 2018 S. Karger AG, Basel.

A Case-Control Study of Oral Epithelial Proliferative Markers among Sudanese Toombak Dippers Using Micronuclei Assay, Argyrophilic Nucleolar Organizer Region, Papanicolaou and Crystal Violet Methods

PubMed Central

Anass, M. Abbas; G. Ahmed, Hussain

2013-01-01

The use of Toombak has been reported to play a major role in the etiology of oral cancer in Sudan. The cellular proliferative activity on the oral epithelium of 210 Toombak dippers was assessed by applying the micronuclei frequency, mean argyrophilic nucleolar organizer region (AgNOR) counts, Papanicolaou method, and 1% crystal violet stain. Participants were divided into 3 groups: 200 were apparently healthy individuals, 100 were Toombak users (cases), 100 were non-tobacco users (control) and 10 were patients with oral squamous cell carcinomas. Cytological atypia was identified among 4 (4%). Toombak users and was not found among the control group (P<0.04). The micronuclei frequencies were higher in Toombak users (1.026) than in the control group (0.356) (P<0.0001). The mean AgNOR counts in Toombak users (2.423) were higher than control group (1.303) (P<0.0001). Neither Toombak users nor control group showed mitotic figures in 1% crystal violet method. The results of this research showed that Toombak dipping is a high risk factor for increase in the cellular proliferation in the oral mucosa. The cytological proliferative marker methods used are useful for screening Toombak users. PMID:24179643

A reference Pelton turbine - High speed visualization in the rotating frame

NASA Astrophysics Data System (ADS)

Solemslie, Bjørn W.; Dahlhaug, Ole G.

2016-11-01

To enable a detailed study the flow mechanisms effecting the flow within the reference Pelton runner designed at the Waterpower Laboratory (NTNLT) a flow visualization system has been developed. The system enables high speed filming of the hydraulic surface of a single bucket in the rotating frame of reference. It is built with an angular borescopes adapter entering the turbine along the rotational axis and a borescope embedded within a bucket. A stationary high speed camera located outside the turbine housing has been connected to the optical arrangement by a non-contact coupling. The view point of the system includes the whole hydraulic surface of one half of a bucket. The system has been designed to minimize the amount of vibrations and to ensure that the vibrations felt by the borescope are the same as those affecting the camera. The preliminary results captured with the system are promising and enable a detailed study of the flow within the turbine.

Airfoil shape for a turbine bucket

DOEpatents

Hyde, Susan Marie; By, Robert Romany; Tressler, Judd Dodge; Schaeffer, Jon Conrad; Sims, Calvin Levy

2005-06-28

Third stage turbine buckets have airfoil profiles substantially in accordance with Cartesian coordinate values of X, Y and Z set forth Table I wherein X and Y values are in inches and the Z values are non-dimensional values from 0 to 0.938 convertible to Z distances in inches by multiplying the Z values by the height of the airfoil in inches. The X and Y values are distances which, when connected by smooth continuing arcs, define airfoil profile sections at each distance Z. The profile sections at each distance Z are joined smoothly to one another to form a complete airfoil shape. The X and Y distances may be scalable as a function of the same constant or number to provide a scaled up or scaled down airfoil section for the bucket. The nominal airfoil given by the X, Y and Z distances lies within an envelop of .+-.0.150 inches in directions normal to the surface of the airfoil.

KSC-06pd0479

NASA Image and Video Library

2006-03-14

KENNEDY SPACE CENTER, FLA. - Inside the Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, workers attach an overhead crane to Discovery's robotic arm in the payload bay. The arm is being removed due to damage found on the arm after it was accidentally bumped by a bridge bucket in the payload bay. Ultrasound inspections revealed a small crack, measuring 1.25 inches by 0.015 inch deep. The arm will be sent back to the vendor for repair. The bucket was being used by technicians cleaning the area and was in the process of being stowed. A bridge bucket is a personnel transport device that is suspended from an overhead bridge that moves back and forth above the shuttle's mid-body. It allows workers to access the payload bay area without walking or standing on the payload bay floor or on the fixed platforms. Space Shuttle Discovery is scheduled for launch on mission STS-121 during a launch planning window of July 1-19. Photo credit: NASA/Kim Shiflett

KSC-06pd0484

NASA Image and Video Library

2006-03-14

KENNEDY SPACE CENTER, FLA. - Inside the Orbiter Processing Facility bay 3 at NASA's Kennedy Space Center, workers lower Discovery's robotic arm onto a flat bed in a work area. The arm was removed from Discovery's payload bay. The arm was removed due to damage found on the arm after it was accidentally bumped by a bridge bucket in the payload bay. Ultrasound inspections revealed a small crack, measuring 1.25 inches by 0.015 inch deep. The arm will be sent back to the vendor for repair. The bucket was being used by technicians cleaning the area and was in the process of being stowed. A bridge bucket is a personnel transport device that is suspended from an overhead bridge that moves back and forth above the shuttle's mid-body. It allows workers to access the payload bay area without walking or standing on the payload bay floor or on the fixed platforms. Space Shuttle Discovery is scheduled for launch on mission STS-121 during a launch planning window of July 1-19. Photo credit: NASA/Kim Shiflett

Pbar Beam Stacking in the Recycler by Longitudinal Phase-space Coating

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhat, C. M.

2013-08-06

Barrier rf buckets have brought about new challenges in longitudinal beam dynamics of charged particle beams in synchrotrons and at the same time led to many new remarkable prospects in beam handling. In this paper, I describe a novel beam stacking scheme for synchrotrons using barrier buckets without any emittance dilution to the beam. First I discuss the general principle of the method, called longitudinal phase-space coating. Multi-particle beam dynamics simulations of the scheme applied to the Recycler, convincingly validates the concepts and feasibility of the method. Then I demonstrate the technique experimentally in the Recycler and also use itmore » in operation. A spin-off of this scheme is its usefulness in mapping the incoherent synchrotron tune spectrum of the beam particles in barrier buckets and producing a clean hollow beam in longitudinal phase space. Both of which are described here in detail with illustrations. The beam stacking scheme presented here is the first of its kind.« less

Comparing historical and modern methods of Sea Surface Temperature measurement - Part 1: Review of methods, field comparisons and dataset adjustments

NASA Astrophysics Data System (ADS)

Matthews, J. B. R.

2012-09-01

Sea Surface Temperature (SST) measurements have been obtained from a variety of different platforms, instruments and depths over the post-industrial period. Today most measurements come from ships, moored and drifting buoys and satellites. Shipboard methods include temperature measurement of seawater sampled by bucket and in engine cooling water intakes. Engine intake temperatures are generally thought to average a few tenths of a °C warmer than simultaneous bucket temperatures. Here I review SST measurement methods, studies comparing shipboard methods by field experiment and adjustments applied to SST datasets to account for variable methods. In opposition to contemporary thinking, I find average bucket-intake temperature differences reported from field studies inconclusive. Non-zero average differences often have associated standard deviations that are several times larger than the averages themselves. Further, average differences have been found to vary widely between ships and between cruises on the same ship. The cause of non-zero average differences is typically unclear given the general absence of additional temperature observations to those from buckets and engine intakes. Shipboard measurements appear of variable quality, highly dependent upon the accuracy and precision of the thermometer used and the care of the observer where manually read. Methods are generally poorly documented, with written instructions not necessarily reflecting actual practices of merchant mariners. Measurements cannot be expected to be of high quality where obtained by untrained sailors using thermometers of low accuracy and precision.

Development and testing of a computer assisted remote-control system for the compact loader-trammer. Report of Investigations/1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruff, T.M.

1992-01-01

A prototype mucking machine designed to operate in narrow vein stopes was developed by Foster-Miller, Inc., Waltham, MA, under contract with the U.S. Bureau of Mines. The machine, called a compact loader/trammer, or minimucker, was designed to replace slusher muckers in narrow-vein underground mines. The minimucker is a six-wheel-drive, skid-steered, load-haul-dump machine that loads muck at the front with a novel slide-bucket system and ejects it out the rear so that the machine does not have to be turned around. To correct deficiencies of the tether remote control system, a computer-based, radio remote control was retrofitted to the minimucker. Initialmore » tests indicated a need to assist the operator in guiding the machine in narrow stopes and an automatic guidance system that used ultrasonic ranging sensors and a wall-following algorithm was installed. Additional tests in a simulated test stope showed that these changes improved the operation of the minimucker. The design and functions of the minimucker and its computer-based, remote control system are reviewed, and an ultrasonic, sensor-based guidance system is described.« less

Physics-Based Stimulation for Night Vision Goggle Simulation

DTIC Science & Technology

2006-11-01

a CRT display system can produce darker black level than displays based on digital light processing (DLP) or liquid crystal technologies. It should...The general form of the bucket equation for any gun (color) is as follows: (3) n n n n r MnRp f MxR MnR ⎛ ⎞− = ⎜ ⎟−⎝ ⎠ Equation 3 General...simulate rendering approach, we began by testing the bucket rendering approach already utilized by SensorHost: (10) n n n n r MnRp f MxR MnR

Cooling supply system for stage 3 bucket of a gas turbine

DOEpatents

Eldrid, Sacheverel Quentin; Burns, James Lee; Palmer, Gene David; Leone, Sal Albert; Drlik, Gary Joseph; Gibler, Edward Eugene

2002-01-01

In a land based gas turbine including a compressor, a combustor and turbine section including at least three stages, an improvement comprising an inlet into a third stage nozzle from the compressor for feeding cooling air from the compressor to the third stage nozzle; at least one passageway running substantially radially through each airfoil of the third stage nozzle and an associated diaphragm, into an annular space between the rotor and the diaphragm; and passageways communicating between the annular space and individual buckets of the third stage.

Gas turbine bucket cooling circuit and related process

DOEpatents

Lewis, Doyle C.; Barb, Kevin Joseph

2002-01-01

A turbine bucket includes an airfoil portion having leading and trailing edges; at least one radially extending cooling passage within the airfoil portion, the airfoil portion joined to a platform at a radially inner end of the airfoil portion; a dovetail mounting portion enclosing a cooling medium supply passage; and, a crossover passage in fluid communication with the cooling medium supply passage and with at least one radially extending cooling passage, the crossover passage having a portion extending along and substantially parallel to an underside surface of the platform.

50. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS 100TON STEEL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

50. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS 100-TON STEEL UNOXIDIZED ORE BIN, STEPHENS-ADAMSON 15 TON/HR INCLINED BUCKET ELEVATOR, AND DUST COLLECTION BIN IN UPPER RIGHT QUADRANT. THE ROD MILL CIRCUIT STOOD IN FRONT OF THE BUCKET ELEVATOR AND BEHIND THE BAKER COOLER (LEFT CENTER). MILL SOLUTION TANKS WERE IN FRONT OF THE CRUSHED OXIDIZED ORE BIN (CENTER), AND THE MILL FLOOR WAS THE NEXT LEVEL DOWN (RIGHT). - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

Stability of Evoked Potentials during Auditory Attention

DTIC Science & Technology

1988-12-01

attention ef- (S2), to which the subject made a behavioral response and fects upon NI components of the evoked potential received food reinforcement for a... food dipper mounted in the floor, and a driver, with a sound tube attached, mounted in the top of the box. Histology Four weeks after surgery, the cats...response paradigm dose of intravenous sodium pentobarbital. Electrolytic lesions were using food reinforcement. They were gradually deprived of food

Reducing Extra-Terrestrial Excavation Forces with Percussion

NASA Technical Reports Server (NTRS)

Mueller, Robert; Schuler, Jason M.; Smith, Jonathan Drew; Nick, Andrew J.; Lippitt, Thomas

2012-01-01

High launch costs and mission requirements drive the need for low mass excavators with mobility platforms, which in turn have little traction and excavation reaction capacity in low gravity environments. This presents the need for precursor and long term future missions with low mass robotic mining technology to perform In-Situ Resource Utilization (ISRU) tasks. This paper discusses a series of experiments that investigate the effectiveness of a percussive digging device to reduce excavation loads and thereby the mass of the excavator itself. A percussive mechanism and 30" wide pivoting bucket were attached at the end of the arm simulating a basic backhoe with a percussion direction tangent to the direction of movement. Impact energies from 13.6J to 30.5J and frequencies from 0 BPM to 700 BPM were investigated. A reduction in excavation force of as much as 50% was achieved in this experimental investigation.

Nomarski imaging interferometry to measure the displacement field of micro-electro-mechanical systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amiot, Fabien; Roger, Jean Paul

2006-10-20

We propose to use a Nomarski imaging interferometer to measure the out-of-plane displacement field of micro-electro-mechanical systems. It is shown that the measured optical phase arises from both height and slope gradients. By using four integrating buckets, a more efficient approach to unwrap the measured phase is presented,thus making the method well suited for highly curved objects. Slope and height effects are then decoupled by expanding the displacement field on a functions basis, and the inverse transformation is applied to get a displacement field from a measured optical phase map change with a mechanical loading. A measurement reproducibility of approximatelymore » 10 pm is achieved, and typical results are shown on a microcantilever under thermal actuation, thereby proving the ability of such a setup to provide a reliable full-field kinematic measurement without surface modification.« less

Note: Planetary gravities made simple: Sample test of a Mars rover wheel.

PubMed

Viera-López, G; Serrano-Muñoz, A; Amigó-Vega, J; Cruzata, O; Altshuler, E

2017-08-01

We introduce an instrument for a wide spectrum of experiments on gravities other than our planet's. It is based on a large Atwood machine where one of the loads is a bucket equipped with a single board computer and different sensors. The computer is able to detect the falling (or rising) and then the stabilization of the effective gravity and to trigger actuators depending on the experiment. Gravities within the range 0.4 g-1.2 g are easily achieved with acceleration noise of the order of 0.01 g. Under Martian gravity, we are able to perform experiments of approximately 1.5 s duration. The system includes features such as WiFi and a web interface with tools for the setup, monitoring, and data analysis of the experiment. We briefly show a case study in testing the performance of a model Mars rover wheel in low gravities.

Note: Planetary gravities made simple: Sample test of a Mars rover wheel

NASA Astrophysics Data System (ADS)

Viera-López, G.; Serrano-Muñoz, A.; Amigó-Vega, J.; Cruzata, O.; Altshuler, E.

2017-08-01

We introduce an instrument for a wide spectrum of experiments on gravities other than our planet's. It is based on a large Atwood machine where one of the loads is a bucket equipped with a single board computer and different sensors. The computer is able to detect the falling (or rising) and then the stabilization of the effective gravity and to trigger actuators depending on the experiment. Gravities within the range 0.4 g-1.2 g are easily achieved with acceleration noise of the order of 0.01 g. Under Martian gravity, we are able to perform experiments of approximately 1.5 s duration. The system includes features such as WiFi and a web interface with tools for the setup, monitoring, and data analysis of the experiment. We briefly show a case study in testing the performance of a model Mars rover wheel in low gravities.

A quality-assurance assessment for constituents reported by the national atmospheric deposition program and the national trends network

NASA Astrophysics Data System (ADS)

See, Randolph B.; Schroder, LeRoy J.; Willoughby, Timothy C.

A continuing quality-assurance program has been operated by the U.S. Geological Survey to evaluate any bias introduced by routine handling, shipping, and laboratory analyses of wet-deposition samples collected in the National Atmospheric Deposition Program (NADP) and National Trends Network (NTN). Blind-audit samples having a variety of constituent concentrations and values were selected. Only blind-audit samples with constituent concentrations and values less than the 95th-percentile concentration for natural wet-deposition samples were included in the analysis. Of the major ions, there was a significant increase of Ca 2+, Mg 2+, Na 2+, K +, SO 42- and Cl -1 in samples handled according to standard protocols and shipped in NADP/NTN sample-collection buckets. For 1979-1987, graphs of smoothed data showing the estimated contamination in blind-audit samples indicate a decrease in the median concentration and ranges of Ca 2+, Mg 2+ and SO 42- contamination of blind-audit samples shipped in sample-collection buckets. Part of the contamination detected in blind-audit samples can be attributed to contact with the sample-collection bucket and lid; however, additional sources also seem to contaminate the blind-audit sample. Apparent decreases in the magnitude and range of sample contamination may be caused by differences in sample-collection bucket- and lid-washing procedures by the NADP/NTN Central Analytical Laboratory. Although the degree of bias is minimal for most constituents, summaries of the NADP/NTN data base may contain overestimates of Ca 2+, Mg 2+, Na -, K + and SO 42- and Cl - concentrations, and underestimates of H + concentrations.

A quality-assurance assessment for constituents reported by the National Atmospheric Deposition Program and the National Trends Network

USGS Publications Warehouse

See, R.B.; Schroder, L.J.; Willoughby, T.C.

1989-01-01

A continuing quality-assurance program has been operated by the U.S. Geographical Survey to evaluate any bias introduced by routine handling, shipping, and laboratory analyses of wet-deposition samples collected in the National Atmospheric Deposition Program (NADP) and National Trends Network (NTN). Blind-audit samples having a variety of constituent concentrations and values were selected. Only blind-audit samples with constituent concentrations and values less than the 95th-percentile concentration for natural wet-deposition samples were included in the analysis. Of the major ions, there was a significant increase of Ca2+, Mg2+, K+ SO42+ and Cl- in samples handled according to standard protocols and shipped in NADP/NTN sample-collection buckets. For 1979-1987, graphs of smoothed data showing the estimated contaminations in blind-audit samples indicate a decrease in the median concentration and ranges of Ca2+, Mg2+ and SO42- contamination of blind-audit samples shipped in sample-collection buckets. Part of the contamination detected in blind-audit samples can be attributed to contact with the sample-collection bucket and lid; however, additional sources also seem to contaminate the blind-audit sample. Apparent decreases in the magnitude and range of sample contamination may be caused by differences in sample-collection bucket- and lid-washing procedures by the NADP/NTN Central Analytical Laboratory. Although the degree of bias is minimal for most constituents, summaries of the NADP/NTN data base may contain overestimates of Ca2+, Mg2+, Na-, K+, SO42- and Cl- concentrations, and underestimates of H+ concentrations.

Precipitation Data for the Mount St. Helens Area, Washington--1981-86

USGS Publications Warehouse

Uhrich, Mark A.

1990-01-01

This report is a compilation of precipitation data from U.S. Geological Survey telemetered 'Early Flood Warning' sites near Mount St. Helens, Washington, and from telemetered hydrologic data sites in the Toutle River and Muddy River basins for the years 1981-86. It also includes precipitation data for 1981-86 from non-telemetered recording rain gages established near the debris-avalanche blockages of Spirit Lake, Coldwater Lake, and Castle Lake. Daily values (midnight to midnight) are listed by station and calendar year for 32 sites. Hourly data, where available, are presented for the storm that generated the highest peak discharge in the North Fork Toutle River each water year. Instrumentation includes 25 tipping-bucket, and 7 weighing-bucket rain gages all without windshields. The seven sites with weighing-bucket gages were the only U.S. Geological Survey sites at which snowfall was measured. Additional snowfall measurements for the same time period in the Mount St. Helens area were collected by the National Weather Service, the U.s. Soil Conservation Service, and the U.S. Army Corps of Engineers and also are presented in this report.

Radiation Characterization Summary: ACRR Polyethylene-Lead-Graphite (PLG) Bucket Located in the Central Cavity on the 32-Inch Pedestal at the Core Centerline (ACRR-PLG-CC-32-cl).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parma, Edward J.,; Vehar, David W.; Lippert, Lance L.

2015-06-01

This document presents the facility-recommended characterization of the neutron, prompt gamma-ray, and delayed gamma-ray radiation fields in the Annular Core Research Reactor (ACRR) for the polyethylene-lead-graphite (PLG) bucket in the central cavity on the 32-inch pedestal at the core centerline. The designation for this environment is ACRR-PLG-CC-32-cl. The neutron, prompt gamma-ray, and delayed gamma-ray energy spectra, uncertainties, and covariance matrices are presented as well as radial and axial neutron and gamma-ray fluence profiles within the experiment area of the bucket. Recommended constants are given to facilitate the conversion of various dosimetry readings into radiation metrics desired by experimenters. Representative pulsemore » operations are presented with conversion examples. Acknowledgements The authors wish to thank the Annular Core Research Reactor staff and the Radiation Metrology Laboratory staff for their support of this work. Also thanks to David Ames for his assistance in running MCNP on the Sandia parallel machines.« less

Carnivore fecal chemicals suppress feeding by Alpine goats (Capra hircus).

PubMed

Weldon, P J; Graham, D P; Mears, L P

1993-12-01

The efficacy of carnivore and ungulate fecal chemicals in suppressing the feeding behavior of Alpine goats (Capra hircus) was examined. In the first four experiments, goats were offered food covered with paper strips treated with fecal extracts of the Bengal tiger, Siberian tiger, African lion, and brown bear, respectively; food covered with solvent-treated and untreated (plain) papers served as controls in each experiment. Goats made fewer head entries into, and ate less food from, buckets containing fecal extracts. In the fifth experiment, goats were offered food covered with paper strips treated with fecal extracts of the puma, Dorcas gazelle, white-bearded gnu, and conspecifics; food covered with solvent-treated and plain papers again served as controls. The amounts of food consumed from buckets containing puma, gazelle, gnu, and solvent treatments were statistically indistinguishable, but less food was consumed from them than from buckets containing the goat-scented or plain papers. No significant differences among treatments were detected with respect to head entries. Field experiments are needed on the use of predator-derived chemicals to reduce damage by goats to vegetation.

Psycholinguistic studies on the syntactic behavior of idioms.

PubMed

Gibbs, R W; Nayak, N P

1989-01-01

Six experiments examined why some idioms can be syntactically changed and still retain their figurative meanings (e.g., John laid down the law can be passivized as The law was laid down by John), while other idioms cannot be syntactically altered without losing their figurative meanings (e.g., John kicked the bucket cannot be passivized into The bucket was kicked by John). Our thesis was that the syntactic behavior of idioms is determined, to a large extent, but speakers' assumptions about the way in which parts of idioms contribute to their figurative interpretations as a whole. The results of our studies indicated that idioms whose individual semantic components contribute to their overall figurative meanings (e.g., go out on a limb) were judged as more syntactically flexible or productive than nondecomposable phrases (e.g., kick the bucket). These findings suggested that idioms do not form a unique class of linguistic items (e.g., as "dead" metaphors), but can share many of the same compositional properties normally associated with more "literal" language. The implications of these data for theories of syntactic productivity of idioms and for models of idiom comprehension are discussed.

Use of a Force Sensor in Archimedes' Principle Experiment, Determination of Buoyant Force and Acceleration Due To Gravity

NASA Astrophysics Data System (ADS)

Aurora, Tarlok

2013-04-01

In introductory physics, students verify Archimedes' principle by immersing an object in water in a container, with a side-spout to collect the displaced water, resulting in a large uncertainty, due to surface tension. A modified procedure was introduced, in which a plastic bucket is suspended from a force sensor, and an object hangs underneath the bucket. The object is immersed in water in a glass beaker (without any side spout), and the weight loss is measured with a computer-controlled force sensor. Instead of collecting the water displaced by the object, tap water was added to the bucket to compensate for the weight loss, and the Archimedes' principle was verified within less than a percent. With this apparatus, buoyant force was easily studied as a function of volume of displaced water; as well as a function of density of saline solution. By graphing buoyant force as a function of volume (or density of liquid), value of g was obtained from slope. Apparatus and sources of error will be discussed.

A semifield evaluation of Vectobac DT (ABG-6499), a new formulation of Bacillus thuringiensis israelensis for control of Aedes albopictus.

PubMed

Toma, Luciano; Severini, Francesco; Bella, Antonino; Romi, Roberto

2003-12-01

We evaluated the effectiveness and duration of effectiveness of a new formulation of Bacillus thuringiensis var. israelensis (Bti) for control of larval Aedes albopictus. The product tested was Vectobac DT (ABG-6499), a Bti tablet formulation containing 3.4% of active ingredient (3,400 ITU/mg) supplied by SCAE Valent BioSciences Italy S.r.l. The study was conducted at the Botanical Garden of the University of Rome "La Sapienza" between June and September 2002, the most favorable season for the development of Ae. albopictus in Italy. Black 20-liter plastic buckets containing water and an organic substrate were used as experimental breeding sites. The number of larvae in these buckets was estimated weekly, and positive buckets were treated with the recommended dose of the larvicide. The results showed that Vectobac DT induced 100% larval mortality after 24 h in all experimental breeding sites during the entire study period. Nonetheless, in most cases, the larvicidal activity only lasted about 48 h; thus, effective mosquito control would require that treatment be performed every 8-10 days in this habitat.

A Robust, Microwave Rain Gauge

NASA Astrophysics Data System (ADS)

Mansheim, T. J.; Niemeier, J. J.; Kruger, A.

2008-12-01

Researchers at The University of Iowa have developed an all-electronic rain gauge that uses microwave sensors operating at either 10 GHz or 23 GHz, and measures the Doppler shift caused by falling raindrops. It is straightforward to interface these sensors with conventional data loggers, or integrate them into a wireless sensor network. A disadvantage of these microwave rain gauges is that they consume significant power when they are operating. However, this may be partially negated by using data loggers' or sensors networks' sleep-wake-sleep mechanism. Advantages of the microwave rain gauges are that one can make them very robust, they cannot clog, they don't have mechanical parts that wear out, and they don't have to be perfectly level. Prototype microwave rain gauges were collocated with tipping-bucket rain gauges, and data were collected for two seasons. At higher rain rates, microwave rain gauge measurements compare well with tipping-bucket measurements. At lower rain rates, the microwave rain gauges provide more detailed information than tipping buckets, which quantize measurement typically in 1 tip per 0.01 inch, or 1 tip per mm of rainfall.

Insects attracted to Maple Sap: Observations from Prince Edward Island, Canada

PubMed Central

Majka, Christopher G.

2010-01-01

Abstract The collection of maple sap for the production of maple syrup is a large commercial enterprise in Canada and the United States. In Canada, which produces 85% of the world’s supply, it has an annual value of over $168 million CAD. Over 38 million trees are tapped annually, 6.5% of which use traditional buckets for sap collection. These buckets attract significant numbers of insects. Despite this, there has been very little investigation of the scale of this phenomenon and the composition of insects that are attracted to this nutrient source. The present paper reports the results of a preliminary study conducted on Prince Edward Island, Canada. Twenty-eight species of Coleoptera, Lepidoptera, and Trichoptera were found in maple sap buckets, 19 of which are known to be attracted to saps and nectars. The physiological role of sap feeding is discussed with reference to moths of the tribe Xylenini, which are active throughout the winter, and are well documented as species that feed on sap flows. Additionally, 18 of the 28 species found in this study are newly recorded in Prince Edward Island. PMID:21594122

Insects attracted to Maple Sap: Observations from Prince Edward Island, Canada.

PubMed

Majka, Christopher G

2010-07-23

The collection of maple sap for the production of maple syrup is a large commercial enterprise in Canada and the United States. In Canada, which produces 85% of the world's supply, it has an annual value of over $168 million CAD. Over 38 million trees are tapped annually, 6.5% of which use traditional buckets for sap collection. These buckets attract significant numbers of insects. Despite this, there has been very little investigation of the scale of this phenomenon and the composition of insects that are attracted to this nutrient source. The present paper reports the results of a preliminary study conducted on Prince Edward Island, Canada. Twenty-eight species of Coleoptera, Lepidoptera, and Trichoptera were found in maple sap buckets, 19 of which are known to be attracted to saps and nectars. The physiological role of sap feeding is discussed with reference to moths of the tribe Xylenini, which are active throughout the winter, and are well documented as species that feed on sap flows. Additionally, 18 of the 28 species found in this study are newly recorded in Prince Edward Island.

External quality-assurance results for the National Atmospheric Deposition Program/National Trends Network, 1995-96

USGS Publications Warehouse

Gordon, John D.

1999-01-01

The U.S. Geological Survey operated four external quality-assurance programs for the National Atmospheric Deposition Program/National Trends Network (NADP/NTN) in 1995 and 1996: the intersite-comparison program, the blind-audit program, the interlaboratory- comparison program, and the collocated-sampler program. The intersite-comparison program assessed the precision and bias of pH and specific-conductance determinations made by NADP/NTN site operators. The analytical bias introduced during routine handling, processing, and shipping of wet-deposition samples and precision of analyte values was estimated using a blind-audit program. An interlaboratory-comparison program was used to evaluate differences between analytical results and to estimate the analytical precision of five North American laboratories that routinely analyzed wet deposition. A collocated-sampler program estimated the precision of the overall precipitation collection and analysis system from initial sample collection through final storage of the data. Results of two intersite-comparison studies completed in 1995 indicated 94.6 and 94.4 percent of the onsite pH determinations met the NADP/NTN accuracy goals, whereas 97.2 and 98.3 percent of the specific-conductance determinations were within the established limits. The percentages of onsite determinations that met the accuracy goals in 1996 were slightly less for both pH and specific-conductance than in 1995. In 1996, 93.2 and 87.5 percent of onsite pH determinations met the accuracy goals, whereas the percentage of onsite specific-conductance measurements that met the goals was 93.9 and 94.9 percent.The blind audit program utilizes a paired sample design to evaluate the effects of routine sample handling, processing and shipping on the chemistry of weekly precipitation samples. The portion of the blind audit sample subject to all of the normal onsite handling and processing steps of a regular weekly precipitation sample is referred to as the bucket portion, whereas the portion receiving only minimal handling is referred to as the bottle portion. Throughout the report, the term positive bias in regard to blind-audit results indicates that the bucket portion had a higher concentration than the bottle portion. The paired t-test of 1995 blind-audit data indicated that routine sample handling, processing, and shipping introduced a very small positive bias (a=0.05) for hydrogen ion and specific conductance and a slight negative bias (a =0.05) for ammonium and sodium. In 1995, the median paired differences between the bucket and bottle portions ranged from -0.02 milligram per liter for both ammonium and nitrate to +0.002 milligram per liter for calcium. Although the paired t-test indicated a very small positive bias for hydrogen ion, the median paired difference between the bucket and bottle portions was 0.00 microequivalents per liter, whereas for specific conductance, the median paired difference between the bucket and bottle portions was 0.200 microsiemens per centimeter in 1995. The paired t-test of blind-audit results in 1996 indicated statistically significant bias for 6 of the 10 analytes. Only chloride, nitrate, hydrogen ion, and specific conductance were not biased in 1996. However, the magnitude of the bias in 1996 was very small and only of limited importance from the viewpoint of an analytical chemist or data user. The median paired differences between the bucket and bottle portions ranged from -0.02 milligram per liter for both ammonium and chloride to +0.006 milligram per liter for calcium. For hydrogen ion, the median paired difference between the bucket and bottle portions was -0.357 microequivalent per liter; for specific conductance, the median paired difference between the bucket and bottle portions was 0.00 microsiemens per centimeter in 1996. Surface-chemistry effects due to different amounts of precipitation contacting the sample collection and shipping container surfac

Chrono: A Parallel Physics Library for Rigid-Body, Flexible-Body, and Fluid Dynamics

DTIC Science & Technology

2013-08-01

big data. Chrono::Render is capable of using 320 cores and is built around Pixar’s RenderMan. All these components combine to produce Chrono, a multi...rather small collection of rigid and/or deformable bodies of complex geometry (hourglass wall, wheel, track shoe, excava- tor blade, dipper ), and a...motivated by the scope of arbitrary data sets and the potentially immense scene complexity that results from big data; REYES, the underlying architecture

Removing Cultural Barriers to Care during Childbearing: A Continuing Education Module

DTIC Science & Technology

1988-01-01

feeding of choice among Mexican-American women and early introduction of cereal is common. In this culture, mothers believe a fat baby equates with a...conception in an infertile or sonless woman, a shamin coaxes the Birth Grandmother into a gourd dipper filled with rice grain. The woman, who desires to...learning and ceremonial activities. The family does also not announce that the infant is healthy, beautiful or fat ; this might bring bad luck. People

Binocular contrast-gain control for natural scenes: Image structure and phase alignment.

PubMed

Huang, Pi-Chun; Dai, Yu-Ming

2018-05-01

In the context of natural scenes, we applied the pattern-masking paradigm to investigate how image structure and phase alignment affect contrast-gain control in binocular vision. We measured the discrimination thresholds of bandpass-filtered natural-scene images (targets) under various types of pedestals. Our first experiment had four pedestal types: bandpass-filtered pedestals, unfiltered pedestals, notch-filtered pedestals (which enabled removal of the spatial frequency), and misaligned pedestals (which involved rotation of unfiltered pedestals). Our second experiment featured six types of pedestals: bandpass-filtered, unfiltered, and notch-filtered pedestals, and the corresponding phase-scrambled pedestals. The thresholds were compared for monocular, binocular, and dichoptic viewing configurations. The bandpass-filtered pedestal and unfiltered pedestals showed classic dipper shapes; the dipper shapes of the notch-filtered, misaligned, and phase-scrambled pedestals were weak. We adopted a two-stage binocular contrast-gain control model to describe our results. We deduced that the phase-alignment information influenced the contrast-gain control mechanism before the binocular summation stage and that the phase-alignment information and structural misalignment information caused relatively strong divisive inhibition in the monocular and interocular suppression stages. When the pedestals were phase-scrambled, the elimination of the interocular suppression processing was the most convincing explanation of the results. Thus, our results indicated that both phase-alignment information and similar image structures cause strong interocular suppression. Copyright © 2018 Elsevier Ltd. All rights reserved.

[Descriptive study of ambulatory blood pressure monitoring in the Primary Care Nursing clinic].

PubMed

Garzón-Quiñones, Marina; Gallardo-Gonzalo, Cristina; Padín-Minaya, Cristina; López-Pisa, Rosa M; Rodríguez-Latre, Luisa M

2013-01-01

To analyze the clinical characteristics and the circadian patterns of patients who received ambulatory blood pressure monitoring (ABPM) by a Primary Care Team. A descriptive, observational, cross-sectional study at community level. People older than 18 years on ABPM (2007-2011). demographic, cardiovascular disease, diabetes mellitus, cardiovascular risk factors, any type of arterial hypertension and circadian pattern. Intruments of measurement: 2 validated instruments with comparable results were used. The instruments for ABPM were placed during the nursing visit. The instruments were then removed after 24h, and the data was retrieved and recorded in the computerized clinical history. A total of 326 people were studied, with a mean age of 60.53±12.96 years, of whom 56.7% were male. According to ABPM the patient results showed that: 38.5% had «white coat» arterial hypertension, 36.2% were classified as poorly controlled arterial hypertension, 17.2% had masked hypertension, and 8% with isolated hypertension. Dipper circadian patterns were present in 39.6% of patients and non- dipper in 60.4%. ABPM allows to Primary Health Care professionals to check the actual situation of the blood pressure over 24h and analyze the circadian pattern. In clinical practice this involves having a comprehensive care strategy on life style, as well as adherence to treatment. Copyright © 2013 Elsevier España, S.L. All rights reserved.

A dietary assessment of selenium risk to aquatic birds on a coal mine affected stream in Alberta, Canada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wayland, M.; Casey, R.; Woodsworth, E.

In this article, we present the results of a dietary-based assessment of the risk that selenium may pose to two aquatic bird species, the American Dipper (Cinclus mexicanus) and the Harlequin Duck (Histrionicus histrionicus), on one of the coal mine-affected streams, the Gregg River. The study consisted of (1) a literature-based toxicity assessment, (2) simulation of selenium exposure in the diets and eggs of the two species, and (3) a risk assessment that coupled information on toxicity and exposure. Diet and egg selenium concentrations associated with a 20% hatch failure rate were 6.4 and 17 {mu} g {center_dot} g{sup -1}more » dry wt, respectively. Simulated dietary selenium concentrations were about 2.0-2.5 {mu} g {center_dot} g{sup -1} higher on the Gregg River than on reference streams for both species. When simulated dietary concentrations were considered, hatch failure rates on the Gregg River were predicted to average 12% higher in American Dippers and 8% higher in Harlequin Ducks than at reference streams. Corresponding values were only 3% for both species when predicted egg concentrations were used. Elevated levels of selenium in insects in some of the reference streams were unexpected and raised a question as to whether aquatic birds have evolved a higher tolerance level for dietary selenium in these areas.« less

The effect of zolpidem on sleep quality, stress status, and nondipping hypertension.

PubMed

Huang, Yuli; Mai, Weiyi; Cai, Xiaoyan; Hu, Yunzhao; Song, Yuanbin; Qiu, Ruofeng; Wu, Yanxian; Kuang, Jian

2012-03-01

Poor sleep quality and stress status have previously been shown to be closely associated with higher activation of the sympathetic nervous system and to be independent predictors of nondipping hypertension. This study aimed to evaluate the effects of the non-hypotensive sedative zolpidem on sleep quality, stress status, and nondipping hypertension. A total of 103 nondippers were defined as poor or good sleepers by the Pittsburgh Sleep Quality Index. They were randomized to receive zolpidem or placebo treatment for 30 days. Stress status was assessed by the Perceived Stress Scale, and levels of epinephrine and norepinephrine were examined to investigate the underlying mechanisms. Poor sleepers treated with zolpidem for 30 days showed significant improvements in sleep quality and stress levels (P<0.01). More nondippers were converted to dippers in the group of poor sleepers treated with zolpidem (11 of 22 patients, 50.0%) than in the placebo (2 of 23, 8.7%) (P<0.01). Epinephrine and norepinephrine levels were significantly reduced in poor sleepers treated with zolpidem (P<0.05). The results of this study suggest that zolpidem can improve sleep quality and stress status, and can convert nondippers with poor sleep quality into dippers. It may be an option for treating nondipping hypertensive patients with poor sleep quality. Copyright © 2011 Elsevier B.V. All rights reserved.

[Analysis of 24-hour blood pressure profile, heart rate variability and carotid atherosclerosis in hypertensive patients among native and nonnative population living in Yamalo-Nenets autonomous district].

PubMed

Gapon, L I; Sereda, T V; Leont'eva, A V

2014-01-01

To study special characteristics of the course of arterial hypertension (AH) among native and nonnative population of Yamalo-Nenets autonomous district. We examined 100 residents of Far North with AH (men and women aged 21-55, mean age 44.08 ± 1.15 years). All patients were divided into 2 equal groups by 50 subjects: group I consisted of representatives of native and group II--nonnative population. Examination was carried out in outpatient clinic in Salekhard and included 24-hour ambulatory blood pressure monitoring (ABPM), registration of heart rate variability, duplex scanning of brachiocephalic arteries, and assessment of blood lipid profile. The groups were matched by age, gender and disease duration. Analysis of heart rate variability detected significant degree of strain of regulatory systems in most patients of both groups. According to results of ABPM "non-dipper" patients prevailed in group I compared to group II (p = 0.01). Common carotid artery intima-media complex was significantly greater compared to normal value in all patients; it was thicker in group I (p < 0.03), but number of carotid artery stenoses was similar in both groups. No dyslipoproteinemia was detected. Compared with group of representatives of nonnative (adopted) population group of native subjects with AH was characterized by greater carotid intima media thickness and prevalence of "non-dipper" patients.

Orbiter processing facility service platform failure and redesign

NASA Technical Reports Server (NTRS)

Harris, Jesse L.

1988-01-01

In a high bay of the Orbiter Processing Facility (OPF) at the Kennedy Space Center, technicians were preparing the space shuttle orbiter Discovery for rollout to the Vehicle Assembly Building (VAB). A service platform, commonly referred to as an OPF Bucket, was being retracted when it suddenly fell, striking a technician and impacting Discovery's payload bay door. A critical component in the OPF Bucket hoist system had failed, allowing the platform to fall. The incident was thoroughly investigated by both NASA and Lockheed, revealing many design deficiencies within the system. The deficiencies and the design changes made to correct them are reviewed.

The Concept and Economics of RDF-3 (Refuse Derived Fuel) Utilization in a Navy Size Pulverized Coal Boiler.

DTIC Science & Technology

1983-05-01

ELE ENTM. PRO ECT. TASK AREA 4 WORK LIN IT kuldElS WASTE ENERGY TECHNOLOGY CORPORATION Y0817-006-01-211 Bedford, MA 01730 I P CONTROLLING OFFICE NAME...Louis Miller-Hoft. 150 Augers 1 50 Missouri Live bottom, Tons TPH rectangular Ames Atlas. 500 Sweep bucket 4 14 Iowa Tons and drag con - TPH veyor Each...Monroe County a. Trailers 17 Hyd. Rams NewYork Tons Each b. Atlas 450 Sweep bucket 8 6 Tons and drag con - TPH veyor Each . Milwaukee Atlas 900 Sweep

SODA: Smart Objects, Dumb Archives

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Zubair, Mohammad; Shen, Stewart N. T.

2004-01-01

We present the Smart Object, Dumb Archive (SODA) model for digital libraries (DLs). The SODA model transfers functionality traditionally associated with archives to the archived objects themselves. We are exploiting this shift of responsibility to facilitate other DL goals, such as interoperability, object intelligence and mobility, and heterogeneity. Objects in a SODA DL negotiate presentation of content and handle their own terms and conditions. In this paper we present implementations of our smart objects, buckets, and our dumb archive (DA). We discuss the status of buckets and DA and how they are used in a variety of DL projects.

Performance of post-processing algorithms for rainfall intensity using measurements from tipping-bucket rain gauges

NASA Astrophysics Data System (ADS)

Stagnaro, Mattia; Colli, Matteo; Lanza, Luca Giovanni; Chan, Pak Wai

2016-11-01

Eight rainfall events recorded from May to September 2013 at Hong Kong International Airport (HKIA) have been selected to investigate the performance of post-processing algorithms used to calculate the rainfall intensity (RI) from tipping-bucket rain gauges (TBRGs). We assumed a drop-counter catching-type gauge as a working reference and compared rainfall intensity measurements with two calibrated TBRGs operated at a time resolution of 1 min. The two TBRGs differ in their internal mechanics, one being a traditional single-layer dual-bucket assembly, while the other has two layers of buckets. The drop-counter gauge operates at a time resolution of 10 s, while the time of tipping is recorded for the two TBRGs. The post-processing algorithms employed for the two TBRGs are based on the assumption that the tip volume is uniformly distributed over the inter-tip period. A series of data of an ideal TBRG is reconstructed using the virtual time of tipping derived from the drop-counter data. From the comparison between the ideal gauge and the measurements from the two real TBRGs, the performances of different post-processing and correction algorithms are statistically evaluated over the set of recorded rain events. The improvement obtained by adopting the inter-tip time algorithm in the calculation of the RI is confirmed. However, by comparing the performance of the real and ideal TBRGs, the beneficial effect of the inter-tip algorithm is shown to be relevant for the mid-low range (6-50 mmh-1) of rainfall intensity values (where the sampling errors prevail), while its role vanishes with increasing RI in the range where the mechanical errors prevail.

A bunch to bucket phase detector for the RHIC LLRF upgrade platform

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, K.S.; Harvey, M.; Hayes, T.

2011-03-28

As part of the overall development effort for the RHIC LLRF Upgrade Platform [1,2,3], a generic four channel 16 bit Analog-to-Digital Converter (ADC) daughter module was developed to provide high speed, wide dynamic range digitizing and processing of signals from DC to several hundred megahertz. The first operational use of this card was to implement the bunch to bucket phase detector for the RHIC LLRF beam control feedback loops. This paper will describe the design and performance features of this daughter module as a bunch to bucket phase detector, and also provide an overview of its place within the overallmore » LLRF platform architecture as a high performance digitizer and signal processing module suitable to a variety of applications. In modern digital control and signal processing systems, ADCs provide the interface between the analog and digital signal domains. Once digitized, signals are then typically processed using algorithms implemented in field programmable gate array (FPGA) logic, general purpose processors (GPPs), digital signal processors (DSPs) or a combination of these. For the recently developed and commissioned RHIC LLRF Upgrade Platform, we've developed a four channel ADC daughter module based on the Linear Technology LTC2209 16 bit, 160 MSPS ADC and the Xilinx V5FX70T FPGA. The module is designed to be relatively generic in application, and with minimal analog filtering on board, is capable of processing signals from DC to 500 MHz or more. The module's first application was to implement the bunch to bucket phase detector (BTB-PD) for the RHIC LLRF system. The same module also provides DC digitizing of analog processed BPM signals used by the LLRF system for radial feedback.« less

Criteria for the Depths of Dredged Navigational Channels.

DTIC Science & Technology

1983-05-01

can be controlled wLthin 5 ft to 10 ft. Otner fixed-spud plants are grab dredges and dipper dredges. They differ from the cutter suction dredge in...planned on a river mouth or a beach where a big amount of littoral drift is expected, the degree of maintenance dredging required in the future should be...paper presents a relatively simple method which permits a quick estimate of the siltation to be expected witnout the use of a big computer. This method

2012 DoD Historic Building Workshop: After-Action Report for Legacy Project # 10-387

DTIC Science & Technology

2012-09-01

Figure 16). The Thurs- day event was at the Giant Dipper roller coaster in Belmont Park, Califor- nia. ERDC/CERL SR-12-12 15 Figure 15. HBW...experiences and lessons learned as well as conversation about possible solutions. The format was the big difference between the 2008 HBC and 2012 HBW...additional cost, identify locations that can accommodate a large crowd for op- tional evening gatherings or happy hour. The gatherings were a big hit

Arc discharge regulation of a megawatt hot cathode bucket ion source for the experimental advanced superconducting tokamak neutral beam injector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie Yahong; Hu Chundong; Liu Sheng

2012-01-15

Arc discharge of a hot cathode bucket ion source tends to be unstable what attributes to the filament self-heating and energetic electrons backstreaming from the accelerator. A regulation method, which based on the ion density measurement by a Langmuir probe, is employed for stable arc discharge operation and long pulse ion beam generation. Long pulse arc discharge of 100 s is obtained based on this regulation method of arc power. It establishes a foundation for the long pulse arc discharge of a megawatt ion source, which will be utilized a high power neutral beam injection device.

Arc discharge regulation of a megawatt hot cathode bucket ion source for the experimental advanced superconducting tokamak neutral beam injector.

PubMed

Xie, Yahong; Hu, Chundong; Liu, Sheng; Jiang, Caichao; Li, Jun; Liang, Lizhen

2012-01-01

Arc discharge of a hot cathode bucket ion source tends to be unstable what attributes to the filament self-heating and energetic electrons backstreaming from the accelerator. A regulation method, which based on the ion density measurement by a Langmuir probe, is employed for stable arc discharge operation and long pulse ion beam generation. Long pulse arc discharge of 100 s is obtained based on this regulation method of arc power. It establishes a foundation for the long pulse arc discharge of a megawatt ion source, which will be utilized a high power neutral beam injection device.

Study on an azimuthal line cusp ion source for the KSTAR neutral beam injector.

PubMed

Jeong, Seung Ho; Chang, Doo-Hee; In, Sang Ryul; Lee, Kwang Won; Oh, Byung-Hoon; Yoon, Byung-Joo; Song, Woo Sob; Kim, Jinchoon; Kim, Tae Seong

2008-02-01

In this study it is found that the cusp magnetic field configuration of an anode bucket influences the primary electron behavior. An electron orbit code (ELEORBIT code) showed that an azimuthal line cusp (cusp lines run azimuthally with respect to the beam extraction direction) provides a longer primary electron confinement time than an axial line cusp configuration. Experimentally higher plasma densities were obtained under the same arc power when the azimuthal cusp chamber was used. The newly designed azimuthal cusp bucket has been investigated in an effort to increase the plasma density in its plasma generator per arc power.

[Significance of working environment improvement based on determination of source of harmful substance--example of an endoscope syringe room using glutaraldehyde].

PubMed

Tashiro, Hiraku; Oda, Susumu; Mori, Koji

2004-03-01

Because a worker complained of irritated eyes and throat due to glutaraldehyde (GA) in an endoscope syringe room, the automated endoscope washers and GA liquid stored in reserve were isolated in a separate room. A ventilation system was installed in this room, and the packing of the automated endoscope washers was changed. However, since the obnoxious smell of GA still remained in the endoscope syringe room, we had to determine the source of the smell. A plastic bucket with a cap was found to be filled with GA for disinfection of the endoscope apparatus. GA had evaporated when dispersed around the bucket, resulting in the obnoxious smell. The plastic bucket was replaced with a different type of container. Moreover, GA from the separate room did not affect the concentration of GA in the working area because the separate room for the automated endoscope washers had twice the ventilation volume proposed by the guidelines of the Society of Gastroenterology Nurses and Associates of the USA and the Healthcare Engineering Association of Japan. Consequently, we reconfirmed the significance of working environment improvement after clarifying the source of the harmful substance.

Effect of Sand Bed Depth and Medium Age on Escherichia coli and Turbidity Removal in Biosand Filters.

PubMed

Napotnik, Julie A; Baker, Derek; Jellison, Kristen L

2017-03-21

The main objective of this study was to build several full-scale biosand filters (BSFs) and assess the long-term (9 month) efficacy for particulate and Escherichia coli removal under simulated real-world usage. Four replicates of three different filter designs were built: the traditional concrete BSF and two scaled-down versions that use a 5 or 2 gal bucket as the casing material. The smaller sand bed depths in the bucket-sized filters did not impact filter performance with respect to (i) turbidity and E. coli removal or (ii) effluent levels of turbidity and E. coli. All filters produced effluents with a mean turbidity of <0.6 nephelometric turbidity unit. In addition, 78, 74, and 72% of effluent samples for the concrete, 5 gal, and 2 gal filters, respectively, had E. coli concentrations of <1 colony-forming unit/100 mL. The bucket-sized filters were found to be a potential alternative to the concrete BSFs for the removal of E. coli and turbidity from drinking water. Because smaller BSFs must be filled more frequently than larger BSFs to produce comparable water volumes, the effect of shorter pause periods on BSF performance should be investigated.

Radiation Characterization Summary: ACRR Cadmium-Polyethylene (CdPoly) Bucket Located in the Central Cavity on the 32-Inch Pedestal at the Core Centerline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parma, Edward J.; Naranjo, Gerald E.; Kaiser, Krista Irene

This document presents the facility-recommended characterization of the neutron, prompt gamma-ray, and delayed gamma-ray radiation fields in the Annular Core Research Reactor (ACRR) for the cadmium-polyethylene (CdPoly) bucket in the central cavity on the 32-inch pedestal at the core centerline. The designation for this environment is ACRR-CdPoly-CC-32-cl. The neutron, prompt gamma-ray, and delayed gamma-ray energy spectra, uncertainties, and covariance matrices are presented as well as radial and axial neutron and gamma-ray fluence profiles within the experiment area of the bucket. Recommended constants are given to facilitate the conversion of various dosimetry readings into radiation metrics desired by experimenters. Representative pulsemore » operations are presented with conversion examples. Acknowledgements The authors wish to thank the Annular Core Research Reactor staff and the Radiation Metrology Laboratory staff for their support of this work. Also thanks to Drew Tonigan for helping field the activation experiments in ACRR, David Samuel for helping to finalize the drawings and get the parts fabricated, and Elliot Pelfrey for preparing the active dosimetry plots.« less

Disdrometer and Tipping Bucket Rain Gauge Handbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartholomew. MJ

2009-12-01

The Distromet disdrometer model RD-80 and NovaLynx tipping bucket rain gauge model 260-2500E-12 are two devices deployed a few meters apart to measure the character and amount of liquid precipitation. The main purpose of the disdrometer is to measure drop size distribution, which it does over 20 size classes from 0.3 mm to 5.4 mm. The data from both instruments can be used to determine rain rate. The disdrometer results can also be used to infer several properties including drop number density, radar reflectivity, liquid water content, and energy flux. Two coefficients, N0 and Λ, from an exponential fit betweenmore » drop diameter and drop number density, are routinely calculated. Data are collected once a minute. The instruments make completely different kinds of measurements. Rain that falls on the disdrometer sensor moves a plunger on a vertical axis. The disdrometer transforms the plunger motion into electrical impulses whose strength is proportional to drop diameter. The rain gauge is the conventional tipping bucket type. Each tip collects an amount equivalent to 0.01 in. of water, and each tip is counted by a data acquisition system anchored by a Campbell CR1000 data logger.« less

SINGLE PHASE ANALYTICAL MODELS FOR TERRY TURBINE NOZZLE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Haihua; Zhang, Hongbin; Zou, Ling

All BWR RCIC (Reactor Core Isolation Cooling) systems and PWR AFW (Auxiliary Feed Water) systems use Terry turbine, which is composed of the wheel with turbine buckets and several groups of fixed nozzles and reversing chambers inside the turbine casing. The inlet steam is accelerated through the turbine nozzle and impacts on the wheel buckets, generating work to drive the RCIC pump. As part of the efforts to understand the unexpected “self-regulating” mode of the RCIC systems in Fukushima accidents and extend BWR RCIC and PWR AFW operational range and flexibility, mechanistic models for the Terry turbine, based on Sandiamore » National Laboratories’ original work, has been developed and implemented in the RELAP-7 code to simulate the RCIC system. RELAP-7 is a new reactor system code currently under development with the funding support from U.S. Department of Energy. The RELAP-7 code is a fully implicit code and the preconditioned Jacobian-free Newton-Krylov (JFNK) method is used to solve the discretized nonlinear system. This paper presents a set of analytical models for simulating the flow through the Terry turbine nozzles when inlet fluid is pure steam. The implementation of the models into RELAP-7 will be briefly discussed. In the Sandia model, the turbine bucket inlet velocity is provided according to a reduced-order model, which was obtained from a large number of CFD simulations. In this work, we propose an alternative method, using an under-expanded jet model to obtain the velocity and thermodynamic conditions for the turbine bucket inlet. The models include both adiabatic expansion process inside the nozzle and free expansion process out of the nozzle to reach the ambient pressure. The combined models are able to predict the steam mass flow rate and supersonic velocity to the Terry turbine bucket entrance, which are the necessary input conditions for the Terry Turbine rotor model. The nozzle analytical models were validated with experimental data and benchmarked with CFD simulations. The analytical models generally agree well with the experimental data and CFD simulations. The analytical models are suitable for implementation into a reactor system analysis code or severe accident code as part of mechanistic and dynamical models to understand the RCIC behaviors. The cases with two-phase flow at the turbine inlet will be pursued in future work.« less

A new method for automated dynamic calibration of tipping-bucket rain gauges

USGS Publications Warehouse

Humphrey, M.D.; Istok, J.D.; Lee, J.Y.; Hevesi, J.A.; Flint, A.L.

1997-01-01

Existing methods for dynamic calibration of tipping-bucket rain gauges (TBRs) can be time consuming and labor intensive. A new automated dynamic calibration system has been developed to calibrate TBRs with minimal effort. The system consists of a programmable pump, datalogger, digital balance, and computer. Calibration is performed in two steps: 1) pump calibration and 2) rain gauge calibration. Pump calibration ensures precise control of water flow rates delivered to the rain gauge funnel; rain gauge calibration ensures precise conversion of bucket tip times to actual rainfall rates. Calibration of the pump and one rain gauge for 10 selected pump rates typically requires about 8 h. Data files generated during rain gauge calibration are used to compute rainfall intensities and amounts from a record of bucket tip times collected in the field. The system was tested using 5 types of commercial TBRs (15.2-, 20.3-, and 30.5-cm diameters; 0.1-, 0.2-, and 1.0-mm resolutions) and using 14 TBRs of a single type (20.3-cm diameter; 0.1-mm resolution). Ten pump rates ranging from 3 to 154 mL min-1 were used to calibrate the TBRs and represented rainfall rates between 6 and 254 mm h-1 depending on the rain gauge diameter. All pump calibration results were very linear with R2 values greater than 0.99. All rain gauges exhibited large nonlinear underestimation errors (between 5% and 29%) that decreased with increasing rain gauge resolution and increased with increasing rainfall rate, especially for rates greater than 50 mm h-1. Calibration curves of bucket tip time against the reciprocal of the true pump rate for all rain gauges also were linear with R2 values of 0.99. Calibration data for the 14 rain gauges of the same type were very similar, as indicated by slope values that were within 14% of each other and ranged from about 367 to 417 s mm h-1. The developed system can calibrate TBRs efficiently, accurately, and virtually unattended and could be modified for use with other rain gauge designs. The system is now in routine use to calibrate TBRs in a large rainfall collection network at Yucca Mountain, Nevada.

Wavelength-Dependent Extinction and Grain Sizes in "Dippers"

NASA Astrophysics Data System (ADS)

Sitko, Michael; Russell, Ray W.; Long, Zachary; Bayyari, Ammar; Assani, Korash; Grady, Carol; Lisse, Carey Michael; Marengo, Massimo; Wisniewski, John

2018-01-01

We have examined inter-night variability of K2-discovered "Dippers" that are not close to being viewed edge-on (as determined from previously-reported ALMA images) using the SpeX spectrograph on NASA's Infrared Telescope facility (IRTF). The three objects observed were EPIC 203850058, EPIC 205151387, and EPIC 204638512 ( = 2MASS J16042165-2130284). Using the ratio of the fluxes from 0.7-2.4 microns between two successive nights, we find that in at least two cases, the extinction increased toward shorter wavelengths. In the case of EPIC 204638512, we find that the properties of the dust differ from that seen in the diffuse interstellar medium and denser molecular clouds. However, the grain properties needed to explain the extinction does resemble those used to model the disks of many young stellar objects. The best fit to the data on EPIC 204638512 includes grains at least 500 microns in size, but lacks grains smaller than 0.25 microns. Since EPIC 204638512 is seen nearly face-on, it is possible the grains are entrained in an accretion flow that preferentially destroys the smallest grains. However, we have no indication of significant gas accretion onto the star in the form of emission lines observed in young low-mass stars. But the He I line at 1.083 microns was seen to change from night to night, and showed a P Cygni profile on one night, suggesting the gas might be outflowing from regions near the star.

Characteristics of white coat hypertension in Chinese Han patients with type 2 diabetes mellitus.

PubMed

Zhou, Jianguang; Liu, Changyun; Shan, Peijia; Zhou, Yingqi; Xu, Erli; Ji, Yufeng

2014-01-01

This study documented the prevalence and clinical features of white coat hypertension (WCH) among Chinese Han patients with type 2 diabetes mellitus (T2DM). Clinic and ambulatory blood pressure (BP) measurements were compared in 856 patients with T2DM to determine the frequency of WCH (WCH was defined as clinical blood pressure ≥140/90 mmHg and daytime blood pressure <135/85 mmHg and/or 24-h ambulatory BP (ABP) mean value of <130/80 mmHg on ambulatory BP monitoring (ABPM). Weight, waist circumference (WC), body mass index (BMI), waist to height ratio (WHtR), fasting blood glucose, glycosylated hemoglobin level and circadian BP patterns were also measured to find clinical features predictive of WCH in T2DM. The prevalence of WCH was 7.36% (63/856) in the overall population, 6.13% (29/473) in male and 8.88% (34/383) in female (p < 0.05). WCH accounted for 14.03% (63/449) of diagnosed hypertension. Age, course of T2DM, male WC were independent protective factors, whereas female sex, smoking and alcohol consumption were independent risk factors for WCH in T2DM. Non-dippers and reverse dippers made up larger proportion of the WCH group (p < 0.01). WCH is relatively common among T2DM patients, it is a unique condition distinct from essential hypertension (EH), and WCH patients also exhibit significant differences in clinical parameters.

The Role of 24-hour Ambulatory Blood Pressure Monitoring in Hypertensive Patients with Normal-tension Glaucoma.

PubMed

Marjanović, Ivan; Marjanović, Marija; Stojanov, Vesna; Hentova-Senćanić, Paraskeva; Marković, Vujica; Božić, Marija; Vukčević-Milošević, Gordana

2015-01-01

Extreme dippers are patients with a nocturnal fall of blood pressure (BP) of more than 20%, dippers have normal diurnal rhythm and decrease of BP of 10-15%, while patients with a nocturnal BP fall of less than 10% are considered to be non-dippers. The aim of this study was to compare 24-hour ambulatory BP monitoring results of normal-tension glaucoma (NTG) patients with NTG suspects, as well as to determine whether NTG patients are more prone to daytime/nighttime systemic arterial BP and heart rate oscillations in comparison to NTG suspects. This was a prospective, cross-sectional and observational study of 57 hypertensive patients (39 female and 18 male), all examined at the Eye and the Cardiology Clinic, Clinical Center of Serbia in Belgrade, between November 2011 and March 2012. Before 24-hour ambulatory BP monitoring, complete ophthalmological examination was performed (intraocular pressure was measured with both Goldmann applanation and dynamic contour tonometer, as well as with computerized perimetry and Heidelberg retinal tomography). There was no statistically significant difference between NTG patients and NTG suspects both in systolic daytime (131.86-141.81 mmHg, SD=±l 4.92 vs. 129.67-141.83 mmHg, SD=±l3; p=0.53) and nighttime measurements (117.1-129.7 mmHg, SD=±l 8.96 vs. 112.11-127.59 mmHg, SD=±16.53; p=0.53) as well as diastolic daytime (74.55-80.37 mmHg, SD=±8.72 vs. 75.19-82.41 mmHg, SD=±7.72; p=0.58) and nighttime measurements (65.66-71.48 mmHg, SD=±8.73 vs. 67.12-73.78 mmHg, SD=±7.1 1; p=0.34). There was no statistically significant difference between NTG patients and NTG suspects in heart rate during the day (72.73-76.36 beats per minute [bpm], SD=±5.44 vs. 72.15-76.45 bpm, SD=±4.59; p=0.43) nor during the night (64.4-71.9 bpm, SD=±6.74 vs. 68.02-72.48 bpm, SD=±4.76; p=0.11). No statistically significant difference was found between NTG patients and NTG suspects in regard to their systolic and diastolic BP measured both during daytime and nighttime. NTG patients had fall (both systolic and diastolic) than NTG suspects.

NMR Spectroscopy Identifies Metabolites Translocated from Powdery Mildew Resistant Rootstocks to Susceptible Watermelon Scions.

PubMed

Mahmud, Iqbal; Kousik, Chandrasekar; Hassell, Richard; Chowdhury, Kamal; Boroujerdi, Arezue F

2015-09-16

Powdery mildew (PM) disease causes significant loss in watermelon. Due to the unavailability of a commercial watermelon variety that is resistant to PM, grafting susceptible cultivars on wild resistant rootstocks is being explored as a short-term management strategy to combat this disease. Nuclear magnetic resonance-based metabolic profiles of susceptible and resistant rootstocks of watermelon and their corresponding susceptible scions (Mickey Lee) were compared to screen for potential metabolites related to PM resistance using multivariate principal component analysis. Significant score plot differences between the susceptible and resistant groups were revealed through Mahalanobis distance analysis. Significantly different spectral buckets and their corresponding metabolites (including choline, fumarate, 5-hydroxyindole-3-acetate, and melatonin) have been identified quantitatively using multivariate loading plots and verified by volcano plot analyses. The data suggest that these metabolites were translocated from the powdery mildew resistant rootstocks to their corresponding powdery mildew susceptible scions and can be related to PM disease resistance.

Sample Acquisition and Instrument Deployment (SAID)

NASA Technical Reports Server (NTRS)

Boyd, Robert C.

1994-01-01

This report details the interim progress for contract NASW-4818, Sample Acquisition and Instrument Deployment (SAID), a robotic system for deploying science instruments and acquiring samples for analysis. The system is a conventional four degree of freedom manipulator 2 meters in length. A baseline design has been achieved through analysis and trade studies. The design considers environmental operating conditions on the surface of Mars, as well as volume constraints on proposed Mars landers. Control issues have also been studied, and simulations of joint and tip movements have been performed. A passively braked shape memory actuator with the ability to measure load has been developed. The wrist also contains a mechanism which locks the lid output to the bucket so that objects can be grasped and released for instrument deployment. The wrist actuator has been tested for operational power and mechanical functionality at Mars environmental conditions. The torque which the actuator can produce has been measured. Also, testing in Mars analogous soils has been performed.

DETAIL VIEW OF UPPER TRAM TERMINAL STRUCTURE, LOOKING NORTHEAST TOWARD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW OF UPPER TRAM TERMINAL STRUCTURE, LOOKING NORTHEAST TOWARD THE REAR OF THE STRUCTURE. THE WHEELS AT THE TOP OF THE TRAM BUCKETS RODE OFF THE STATIONARY CABLES ONTO THE TRACK SUPPORTED BY THE "C" IRONS SUSPENDED FROM THE TOP TIMBERS, CLEARLY SEEN AT THE TOP OF THE FRAME. THE ANCHOR POINTS FOR THE TWO STATIONARY CABLES ARE AT BOTTOM CENTER, JUST BELOW THE CABLE WHEEL. THE MAIN CABLE WHEEL IS IN THE DISTANCE AT CENTER LEFT. THE ORE CHUTES COMING FROM THE ORE BIN ARE AT LEFT CENTER EDGE. TRAM BUCKETS WERE CHARGED HERE. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

Internal cooling circuit for gas turbine bucket

DOEpatents

Hyde, Susan Marie; Davis, Richard Mallory

2005-10-25

In a gas turbine bucket having a shank portion and an airfoil portion having leading and trailing edges and pressure and suction sides, an internal cooling circuit, the internal cooling circuit having a serpentine configuration including plural radial outflow passages and plural radial inflow passages, and wherein a coolant inlet passage communicates with a first of the radial outflow passages along the trailing edge, the first radial outflow passage having a plurality of radially extending and radially spaced elongated rib segments extending between and connecting the pressure and suction sides in a middle region of the first passage to prevent ballooning of the pressure and suction sides at the first radial outflow passage.

Retention sleeve for a thermal medium carrying tube in a gas turbine

DOEpatents

Lathrop, Norman Douglas; Czachor, Robert Paul

2003-01-01

Multiple tubes are connected to steam supply and spent cooling steam return manifolds for supplying cooling steam to buckets and returning spent cooling steam from the buckets to the manifolds, respectively. The tubes are prevented from axial movement in one direction by flanges engaging end faces of the spacer between the first and second-stage wheels. Retention sleeves are disposed about cantilevered ends of the tubes. One end of the retention sleeve engages an enlarged flange on the tube, while an opposite end is spaced axially from an end face of the adjoining wheel, forming a gap, enabling thermal expansion of the tubes and limiting axial displacement of the tube in the opposite direction.

1. GENERAL VIEW OF SLC3W SHOWING SOUTH FACE AND EAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL VIEW OF SLC-3W SHOWING SOUTH FACE AND EAST SIDE OF A-FRAME MOBILE SERVICE TOWER (MST). MST IN SERVICE POSITION OVER LAUNCHER AND FLAME BUCKET. CABLE TRAYS BETWEEN LAUNCH OPERATIONS BUILDING (BLDG. 763) AND SLC-3W IN FOREGROUND. LIQUID OXYGEN APRON VISIBLE IMMEDIATELY EAST (RIGHT) OF MST; FUEL APRON VISIBLE IMMEDIATELY WEST (LEFT) OF MST. A PORTION OF THE FLAME BUCKET VISIBLE BELOW THE SOUTH FACE OF THE MST. CAMERA TOWERS VISIBLE EAST OF MST BETWEEN ROAD AND CABLE TRAY, AND SOUTH OF MST NEAR LEFT MARGIN OF PHOTOGRAPH. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 West, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

A Contact Pressure Analysis Comparing an All-Inside and Inside-Out Surgical Repair Technique for Bucket-Handle Medial Meniscus Tears.

PubMed

Marchetti, Daniel Cole; Phelps, Brian M; Dahl, Kimi D; Slette, Erik L; Mikula, Jacob D; Dornan, Grant J; Bucci, Gabriella; Turnbull, Travis Lee; Singleton, Steven B

2017-10-01

To directly compare effectiveness of the inside-out and all-inside medial meniscal repair techniques in restoring native contact area and contact pressure across the medial tibial plateau at multiple knee flexion angles. Twelve male, nonpaired (n = 12), fresh-frozen human cadaveric knees underwent a series of 5 consecutive states: (1) intact medial meniscus, (2) MCL tear and repair, (3) simulated bucket-handle longitudinal tear of the medial meniscus, (4) inside-out meniscal repair, and (5) all-inside meniscal repair. Knees were loaded with a 1,000-N axial compressive force at 5 knee flexion angles (0°, 30°, 45°, 60°, 90°), and contact area, mean contact pressure, and peak contact pressure were calculated using thin film pressure sensors. No significant differences were observed between the inside-out and all-inside repair techniques at any flexion angle for contact area, mean contact pressure, and peak contact pressure (all P > .791). Compared with the torn meniscus state, inside-out and all-inside repair techniques resulted in increased contact area at all flexion angles (all P < .005 and all P < .037, respectively), decreased mean contact pressure at all flexion angles (all P < .007 and all P < .001, respectively) except for 0° (P = .097 and P = .39, respectively), and decreased peak contact pressure at all flexion angles (all P < .001, all P < .001, respectively) except for 0° (P = .080 and P = .544, respectively). However, there were significant differences in contact area and peak contact pressure between the intact state and inside-out technique at angles ≥45° (all P < .014 and all P < .032, respectively). Additionally, there were significant differences between the intact state and all-inside technique in contact area at 60° and 90° and peak contact pressure at 90° (both P < .005 and P = .004, respectively). Median values of intact contact area, mean contact pressure, and peak contact pressure over the tested flexion angles ranged from 498 to 561 mm 2 , 786 to 997 N/mm 2 , and 1,990 to 2,215 N/mm 2 , respectively. Contact area, mean contact pressure, and peak contact pressure were not significantly different between the all-inside and inside-out repair techniques at any tested flexion angle. Both techniques adequately restored native meniscus biomechanics near an intact level. An all-inside repair technique provided similar, native-state-restoring contact mechanics compared with an inside-out repair technique for the treatment of displaced bucket-handle tears of the medial meniscus. Thus, both techniques may adequately decrease the likelihood of cartilage degeneration. Copyright © 2017 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Evaluating the Impacts of Selected Packaging Materials on the Quality Attributes of Cassava Flour (cvs. TME 419 and UMUCASS 36).

PubMed

Opara, Umezuruike Linus; Caleb, Oluwafemi J; Uchechukwu-Agua, Amarachi D

2016-02-01

The influence of packaging materials (plastic bucket, low density polyethylene [LDPE] bags and paper bags) on quality attributes of the flour of 2 cassava cultivars (TME 419 and UMUCASS 36) stored at 23 ± 2 °C and 60% relative humidity (RH) were investigated for 12 wk. Cassava flour from each package type was evaluated for proximate composition, physicochemical properties and microbial growth at 4-wk intervals. Total color difference (∆E) of both cassava flour cultivars increased with storage duration. Flour packed in plastic bucket had the lowest change in color (3.2 ± 0.42) for cv. "TME 419ˮ and (4.1 ± 0.87) for cv. "UMUCASS 36ˮ at the end of week 12. Total carotenoid decreased across all treatment, and after the 12 wk storage, the highest total carotenoid retention (1.7 ± 0.02 and 2.0 ± 0.05 μg/mL) was observed in flour packed in plastic bucket. However, cassava flour in paper bag had the lowest microbial count of 3.4 ± 0.03 and 3.4 ± 0.08 log cfu/g for total aerobic mesophilic bacteria and fungi, respectively. © 2015 Institute of Food Technologists®

An Experimental Study on the Darrieus-Savonius Turbine for the Tidal Current Power Generation

NASA Astrophysics Data System (ADS)

Kyozuka, Yusaku

The Darrieus turbine is popular for tidal current power generation in Japan. It is simple in structure with straight wings rotating around a vertical axis, so that it has no directionality against the motion of tidal flow which changes its direction twice a day. However, there is one defect in the Darrieus turbine; its small starting torque. Once it stops, a Darrieus turbine is hard to re-start until a fairly fast current is exerted on it. To improve the starting torque of the Darrieus turbine used for tidal power generation, a hybrid turbine, composed of a Darrieus turbine and a Savonius rotor is proposed. Hydrodynamic characteristics of a semi-circular section used for the Savonius bucket were measured in a wind tunnel. The torque of a two bucket Savonius rotor was measured in a circulating water channel, where four different configurations of the bucket were compared. A combined Darrieus and Savonius turbine was tested in the circulating water channel, where the effect of the attaching angle between Darrieus wing and Savonius rotor was studied. Finally, power generation experiments using a 48 pole electric generator were conducted in a towing tank and the power coefficients were compared with the results of experiments obtained in the circulating water channel.

Compost in plant microbial fuel cell for bioelectricity generation.

PubMed

Moqsud, M A; Yoshitake, J; Bushra, Q S; Hyodo, M; Omine, K; Strik, David

2015-02-01

Recycling of organic waste is an important topic in developing countries as well as developed countries. Compost from organic waste has been used for soil conditioner. In this study, an experiment has been carried out to produce green energy (bioelectricity) by using paddy plant microbial fuel cells (PMFCs) in soil mixed with compost. A total of six buckets filled with the same soil were used with carbon fiber as the electrodes for the test. Rice plants were planted in five of the buckets, with the sixth bucket containing only soil and an external resistance of 100 ohm was used for all cases. It was observed that the cells with rice plants and compost showed higher values of voltage and power density with time. The highest value of voltage showed around 700 mV when a rice plant with 1% compost mixed soil was used, however it was more than 95% less in the case of no rice plant and without compost. Comparing cases with and without compost but with the same number of rice plants, cases with compost depicted higher voltage to as much as 2 times. The power density was also 3 times higher when the compost was used in the paddy PMFCs which indicated the influence of compost on bio-electricity generation. Copyright © 2014 Elsevier Ltd. All rights reserved.

Object permanence in marine mammals using the violation of expectation procedure.

PubMed

Singer, Rebecca; Henderson, Elizabeth

2015-03-01

Object permanence refers to the ability to process information about objects even when they are not visible. One stage of object permanence, called visible displacement, involves being able to find an object that has been fully hidden from view. Visible displacement has been demonstrated in many animal species, yet very little is known about object permanence in marine mammals. In addition, the methodology for testing visible displacement has sometimes been called into question because alternative explanations could account for subjects' success. The current study investigated visible displacement in Atlantic bottlenose dolphins and California sea lions using a methodology called violation of expectation, in which the animal's fish bucket was placed on a table surrounded on three sides by curtains. A solid screen placed in front of the bucket was then rotated in an arc from front to back. The screen was rotated either 120° (possible event) or 180° (surprising event), appearing as if the bucket disappeared. Both dolphins and sea lions looked significantly longer during the 180°, unexpected, trials than the expected event trials. Results suggest that both dolphins and sea lions pass visible displacement tests without the use of perceptual cues. This article is part of a Special Issue entitled: Tribute to Tom Zentall. Copyright © 2014 Elsevier B.V. All rights reserved.

A warm-season comparison of WRF coupled to the CLM4.0, Noah-MP, and Bucket hydrology land surface schemes over the central USA

NASA Astrophysics Data System (ADS)

Van Den Broeke, Matthew S.; Kalin, Andrew; Alavez, Jose Abraham Torres; Oglesby, Robert; Hu, Qi

2017-11-01

In climate modeling studies, there is a need to choose a suitable land surface model (LSM) while adhering to available resources. In this study, the viability of three LSM options (Community Land Model version 4.0 [CLM4.0], Noah-MP, and the five-layer thermal diffusion [Bucket] scheme) in the Weather Research and Forecasting model version 3.6 (WRF3.6) was examined for the warm season in a domain centered on the central USA. Model output was compared to Parameter-elevation Relationships on Independent Slopes Model (PRISM) data, a gridded observational dataset including mean monthly temperature and total monthly precipitation. Model output temperature, precipitation, latent heat (LH) flux, sensible heat (SH) flux, and soil water content (SWC) were compared to observations from sites in the Central and Southern Great Plains region. An overall warm bias was found in CLM4.0 and Noah-MP, with a cool bias of larger magnitude in the Bucket model. These three LSMs produced similar patterns of wet and dry biases. Model output of SWC and LH/SH fluxes were compared to observations, and did not show a consistent bias. Both sophisticated LSMs appear to be viable options for simulating the effects of land use change in the central USA.

Beyond the bucket: testing the effect of experimental design on rate and sequence of decay

NASA Astrophysics Data System (ADS)

Gabbott, Sarah; Murdock, Duncan; Purnell, Mark

2016-04-01

Experimental decay has revealed the potential for profound biases in our interpretations of exceptionally preserved fossils, with non-random sequences of character loss distorting the position of fossil taxa in phylogenetic trees. By characterising these sequences we can rewind this distortion and make better-informed interpretations of the affinity of enigmatic fossil taxa. Equally, rate of character loss is crucial for estimating the preservation potential of phylogentically informative characters, and revealing the mechanisms of preservation themselves. However, experimental decay has been criticised for poorly modeling 'real' conditions, and dismissed as unsophisticated 'bucket science'. Here we test the effect of a differing experimental parameters on the rate and sequence of decay. By doing so, we can test the assumption that the results of decay experiments are applicable to informing interpretations of exceptionally preserved fossils from diverse preservational settings. The results of our experiments demonstrate the validity of using the sequence of character loss as a phylogenetic tool, and sheds light on the extent to which environment must be considered before making decay-informed interpretations, or reconstructing taphonomic pathways. With careful consideration of experimental design, driven by testable hypotheses, decay experiments are robust and informative - experimental taphonomy needn't kick the bucket just yet.

Laser stapedotomy: a comparative study of prostheses and seals.

PubMed

Perkins, R; Curto, F S

1992-12-01

During the past 13 years, a number of prostheses of differing design and tissue seals have been used in laser stapedotomy for otosclerosis. This study compares the results of three different configurations of prostheses and tissue seals in a series of 53 patients. In 19, a platinum wire Teflon piston was placed in the laser stapedotomy fenestra and crimped on the long process of the incus; autologous venous blood was infiltrated into the oval window niche as a sealing mechanism. In 8 patients, a stainless steel bucket-handle-type prosthesis was used with a blood tissue seal. In 26 patients, a segment of autogenous vein was clad onto the bucket-handle-type prosthesis and placed into the laser fenestra. Two tissue seals (blood and vein) were also compared. The results were compared with regard to several audiometric parameters. It would appear that the bucket handle/vein configuration improves air-bone gap closure in the low- and mid-frequency speech range and also shows an advantage for air-bone gap closure to 10 dB or less compared to the other configurations in this study. Mean postoperative gaps were significantly less for vein compared to the blood tissue seal. Physiologic and surgical implications are discussed, and the vein-clad technique is illustrated.

PowerWheel - A new look at waterwheels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weisman, R.N.; Broome, K.R.; Mayo, H.A.

1995-12-31

The PowerWheel is an advanced overshot water wheel, designed to generate electric power at drop structures on canals or on overflow spillways. Unlike the wheels of the 18th and 19th century which were designed to have maximum efficiency at a single flow rate, the current applications demand a wheel that can operate efficiently over a wide range of flows. The prototype PowerWheel will have a width to diameter ratio of 3 or more, in contrast to the wheels of the 19th century, which had large diameters and narrow widths. A model PowerWheel was built of plexiglass and delivered for testingmore » to the Imbt Hydraulics Laboratory at Lehigh University. The wheel has a diameter of 3.5 ft and is 16 in wide. The wheel contains 20 buckets and the bucket depth can be varied from a shallow depth of 4 in to a mid depth of 7 in to 10 in for the deep bucket. The blades have a rather simple geometry with a 4 in radius quarter circle at the outside of the wheel and then straight to the bottom of the bucket. The flume in which the wheel was tested has a width of 18 in. A hole was cut in the head box of the flume and a delivery chute was connected to the head box. The position of the chute can readily be moved up or down in relation to the wheel; for a fixed position of the chute on the head box, the slope of the chute can be changed because the chute was attached to the head box with a piano hinge. The laboratory flow system can deliver flow up to 6 cfs through a calibrated Venturi meter. The PowerWheel was subjected to flows ranging from 0.3 to 3.5 cfs.« less

Administration of serotonin inhibitor p-Chlorophenylalanine induces pessimistic-like judgement bias in sheep.

PubMed

Doyle, Rebecca E; Hinch, Geoff N; Fisher, Andrew D; Boissy, Alain; Henshall, John M; Lee, Caroline

2011-02-01

Judgement bias has potential as a measure of affective state in animals. The serotonergic system may be one mechanism involved with the formation of negative judgement biases. It was hypothesised that depletion of brain serotonin would induce negative judgement biases in sheep. A dose response trial established that 40 mg/kg of p-Chlorophenylalanine (pCPA) administered to sheep for 3 days did not affect feeding motivation or locomotion required for testing judgement biases. Thirty Merino ewes (10 months old) were trained to an operant task for 3 weeks. Sheep learnt to approach a bucket when it was placed in one corner of the testing facility to receive a feed reward (go response), and not approach it when in the alternate corner (no-go response) to avoid a negative reinforcer (exposure to a dog). Following training, 15 sheep were treated with pCPA (40 mg/kg daily) for an extended duration (5 days). Treated and control sheep were tested for judgement bias following 3 and 5 days of treatment, and again 5 days after cessation of treatment. Testing involved the bucket being presented in ambiguous locations between the two learnt locations, and the response of the sheep (go/no-go) measured their judgement of the bucket locations. Following 5 days of treatment, pCPA-treated sheep approached the most positive ambiguous location significantly less than control sheep, suggesting a pessimistic-like bias (treatment × bucket location interaction F(1,124.6)=49.97, p=0.011). A trend towards a significant interaction was still evident 5 days after the cessation of pCPA treatment (p=0.068), however no significant interaction was seen on day 3 of testing (p=0.867). These results support the suggestion that judgement bias is a cognitive measure of affective state, and that the serotonergic pathway may be involved. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

Lightweight Liquid Helium Dewar for High-Altitude Balloon Payloads

NASA Technical Reports Server (NTRS)

Kogut, Alan; James, Bryan; Fixsen, Dale

2013-01-01

Astrophysical observations at millimeter wavelengths require large (2-to-5- meter diameter) telescopes carried to altitudes above 35 km by scientific research balloons. The scientific performance is greatly enhanced if the telescope is cooled to temperatures below 10 K with no emissive windows between the telescope and the sky. Standard liquid helium bucket dewars can contain a suitable telescope for telescope diameter less than two meters. However, the mass of a dewar large enough to hold a 3-to-5-meter diameter telescope would exceed the balloon lift capacity. The solution is to separate the functions of cryogen storage and in-flight thermal isolation, utilizing the unique physical conditions at balloon altitudes. Conventional dewars are launched cold: the vacuum walls necessary for thermal isolation must also withstand the pressure gradient at sea level and are correspondingly thick and heavy. The pressure at 40 km is less than 0.3% of sea level: a dewar designed for use only at 40 km can use ultra thin walls to achieve significant reductions in mass. This innovation concerns new construction and operational techniques to produce a lightweight liquid helium bucket dewar. The dewar is intended for use on high-altitude balloon payloads. The mass is low enough to allow a large (3-to-5-meter) diameter dewar to fly at altitudes above 35 km on conventional scientific research balloons without exceeding the lift capability of the balloon. The lightweight dewar has thin (250- micron) stainless steel walls. The walls are too thin to support the pressure gradient at sea level: the dewar launches warm with the vacuum space vented continuously during ascent to eliminate any pressure gradient across the walls. A commercial 500-liter storage dewar maintains a reservoir of liquid helium within a minimal (hence low mass) volume. Once a 40-km altitude is reached, the valve venting the vacuum space of the bucket dewar is closed to seal the vacuum space. A vacuum pump then evacuates the dewar vacuum space to provide the necessary thermal isolation. Liquid helium may then be transferred from the storage dewar into the bucket dewar to cool the telescope inside the bucket dewar. By splitting the functions of helium storage and in-flight thermal isolation, the parasitic mass associated with the dewar pressure vessel is eliminated to achieve factor-of-five or better reduction in mass. The lower mass allows flight on conventional scientific research balloons, even for telescopes 3 to 5 meters in diameter.

A New Conception of Bucket Wheel Excavator Cab and Seat Mounting

NASA Astrophysics Data System (ADS)

Blekta, J.; Mevald, J.; Petríková, I.; Petříček, J.; Lufinka, A.

One of the most important problem of coal mining by bucket wheel excavators is how to minimize influence of vibrations on driver's body. Project of Ministry of Trade and Industry of the Czech Republic solved in Technical University of Liberec was engaged in this problem. The aim of this project was to design a new cab and seat mounting of wheel excavator Schrs 1320. A suitable possibilities of cab suspensions were investigated to minimize driver body vibrations and to improve influence of mining process to drivers health. After optimization one concept was chosen. A new methodic of measured data evaluation was created for using in excavators as well as in laboratory. The new concept of dynamic seat absorber were designed also.

Evaluation of the communication quality of free-space laser communication based on the power-in-the-bucket method.

PubMed

Yin, Xianghui; Wang, Rui; Wang, Shaoxin; Wang, Yukun; Jin, Chengbin; Cao, Zhaoliang; Xuan, Li

2018-02-01

Atmospheric turbulence seriously affects the quality of free-space laser communication. The Strehl ratio (SR) is used to evaluate the effect of atmospheric turbulence on the receiving energy of free-space laser communication systems. However, the SR method does not consider the area of the laser-receiving end face. In this study, the power-in-the-bucket (PIB) method is demonstrated to accurately evaluate the effect of turbulence on the receiving energy. A theoretical equation is first obtained to calculate PIB. Simulated and experimental validations are then performed to verify the effectiveness of the theoretical equation. This work may provide effective guidance for the design and evaluation of free-space laser communication systems.

Magnetic bucket for rotating unmagnetized plasma.

PubMed

Katz, Noam; Collins, Cami; Wallace, John; Clark, Mike; Weisberg, David; Jara-Almonte, Jon; Reese, Ingrid; Wahl, Carl; Forest, Cary

2012-06-01

A new experiment is described which generates flow in unmagnetized plasma. Confinement is provided by a cage of permanent magnets, arranged to form an axisymmetric, high-order, multipolar magnetic field. This field configuration-sometimes called a "magnetic bucket"-has a vanishingly small field in the core of the experiment. Toroidal rotation is driven by J × B forces applied in the magnetized edge. The cross-field current that is required for this forcing flows from anodes to thermionic cathodes, which are inserted between the magnet rings. The rotation at the edge reaches 3 km/s and is viscously coupled to the unmagnetized core plasma. We describe the conditions necessary for rotation, as well as a 0-dimensional power balance used to understand plasma confinement in the experiment.

Turbine system

DOEpatents

McMahan, Kevin Weston; Dillard, Daniel Jackson

2016-05-03

A turbine system is disclosed. The turbine system includes a transition duct having an inlet, an outlet, and a passage extending between the inlet and the outlet and defining a longitudinal axis, a radial axis, and a tangential axis. The outlet of the transition duct is offset from the inlet along the longitudinal axis and the tangential axis. The turbine system further includes a turbine section connected to the transition duct. The turbine section includes a plurality of shroud blocks at least partially defining a hot gas path, a plurality of buckets at least partially disposed in the hot gas path, and a plurality of nozzles at least partially disposed in the hot gas path. At least one of a shroud block, a bucket, or a nozzle includes means for withstanding high temperatures.

Circadian rhythm of urinary potassium excretion during treatment with an angiotensin receptor blocker.

PubMed

Ogiyama, Yoshiaki; Miura, Toshiyuki; Watanabe, Shuichi; Fuwa, Daisuke; Tomonari, Tatsuya; Ota, Keisuke; Kato, Yoko; Ichikawa, Tadashi; Shirasawa, Yuichi; Ito, Akinori; Yoshida, Atsuhiro; Fukuda, Michio; Kimura, Genjiro

2014-12-01

We have reported that the circadian rhythm of urinary potassium excretion (U(K)V) is determined by the rhythm of urinary sodium excretion (U(Na)V) in patients with chronic kidney disease (CKD). We also reported that treatment with an angiotensin receptor blocker (ARB) increased the U(Na)V during the daytime, and restored the non-dipper blood pressure (BP) rhythm into a dipper pattern. However, the circadian rhythm of U(K)V during ARB treatment has not been reported. Circadian rhythms of U(Na)V and U(K)V were examined in 44 patients with CKD undergoing treatment with ARB. Whole-day U(Na)V was not altered by ARB whereas whole-day U(K)V decreased. Even during the ARB treatment, the significant relationship persisted between the night/day ratios of U(Na)V and U(K)V (r=0.56, p<0.0001). Whole-day U(K)V/U(Na)V ratio (p=0.0007) and trans-tubular potassium concentration gradient (p=0.002) were attenuated but their night/day ratios remained unchanged. The change in the night/day U(K)V ratio correlated directly with the change in night/day U(Na)V ratio (F=20.4) rather than with the changes in aldosterone, BP or creatinine clearance. The circadian rhythm of U(K)V was determined by the rhythm of UNaV even during ARB treatment. Changes in the circadian U(K)V rhythm were not determined by aldosterone but by U(Na)V. © The Author(s) 2013.

Amyloid burden and sleep blood pressure in amnestic mild cognitive impairment

PubMed Central

Tarumi, Takashi; Harris, Thomas S.; Hill, Candace; German, Zohre; Riley, Jonathan; Turner, Marcel; Womack, Kyle B.; Kerwin, Diana R.; Monson, Nancy L.; Stowe, Ann M.; Mathews, Dana; Cullum, C. Munro

2015-01-01

Objective: To determine whether cortical β-amyloid (Aβ) deposition is associated with circadian blood pressure (BP) profiles and dynamic cerebral blood flow (CBF) regulation in patients with amnestic mild cognitive impairment (aMCI). Methods: Forty participants with aMCI were included in this study. Cortical Aβ depositions were measured by 18F-florbetapir PET and expressed as the standardized uptake value ratio (SUVR) relative to the cerebellum. Circadian BP profiles were measured by 24-hour ambulatory monitoring during awake and sleep periods. The dipping status of sleep BP (i.e., the percent changes from the awake BP) was calculated and dichotomized into the dipper (≥10%) and nondipper (<10%) groups. Dynamic CBF regulation was assessed by a transfer function analysis between beat-to-beat changes in BP and CBF velocity measured from the middle cerebral artery during a repeated sit-stand maneuver. Results: Age was positively correlated with a greater Aβ deposition in the posterior cingulate, precuneus, and mean cortex. Accounting for the age effect, attenuated reductions in sleep systolic BP were associated with higher levels of posterior cingulate SUVR. Consistently, the nondippers exhibited a higher SUVR in the posterior cingulate than the dippers. Transfer function gain between changes in BP and CBF velocity was diminished in the nondippers, and moreover those individuals with a lower gain exhibited a higher SUVR in the posterior cingulate. Conclusions: Attenuated reductions in sleep BP are associated with a greater Aβ burden in the posterior cingulate and altered dynamic CBF regulation in patients with aMCI. PMID:26537049

Treatment of Hypertension: Favourable Effect of the Twice-Daily Compared to the Once-Daily (Evening) Administration of Perindopril and Losartan.

PubMed

Szauder, Ipoly; Csajági, Eszter; Major, Zsuzsanna; Pavlik, Gabor; Ujhelyi, Gabriella

2015-01-01

Little is known about the effect of twice daily administration of same dose of ACE inhibitor and ARB on the diurnal/nocturnal blood pressure (BP) ratio. We aimed to assess the effect of two widely used long-acting drugs: perindopril and losartan in the treatment of hypertension comparing the once-daily (evening) vs. twice-daily (morning and evening) administration with the same daily doses. Untreated primary hypertensive patients without complaints (a total of 164: 65 men, 99 women, 55.7 ± 13.7 years of age, 41-41 patients per treated groups) were selected with non-dipper phenomenon, estimated by diurnal index (DI) <10%. The effect of evening (8 mg perindopril or 100 mg losartan) vs morning and evening (4-4 mg perindopril or 50-50 mg losartan) administration was determined on a 14-day treatment by ABPM. The mean BP, the percent time elevation index, and the hyperbaric impact decreased in both drug groups. Significant difference was observed in the DI in the case of twice-daily administration vs once-daily evening dosing. The twice-daily administration with the same daily dose of perindopril or losartan seems to be more effective compared to the once daily evening administration in eliminating the non-dipper phenomenon. According to some authors the non-dipping phenomenon increases cardiovascular risk, while others are of the opinion that the association of non-dipping with cardiovascular events does not necessarily mean that selective treatment of non-dipping improves cardiovascular outcomes. © 2015 S. Karger AG, Basel.

Contrast masking in strabismic amblyopia: attenuation, noise, interocular suppression and binocular summation.

PubMed

Baker, Daniel H; Meese, Tim S; Hess, Robert F

2008-07-01

To investigate amblyopic contrast vision at threshold and above we performed pedestal-masking (contrast discrimination) experiments with a group of eight strabismic amblyopes using horizontal sinusoidal gratings (mainly 3c/deg) in monocular, binocular and dichoptic configurations balanced across eye (i.e. five conditions). With some exceptions in some observers, the four main results were as follows. (1) For the monocular and dichoptic conditions, sensitivity was less in the amblyopic eye than in the good eye at all mask contrasts. (2) Binocular and monocular dipper functions superimposed in the good eye. (3) Monocular masking functions had a normal dipper shape in the good eye, but facilitation was diminished in the amblyopic eye. (4) A less consistent result was normal facilitation in dichoptic masking when testing the good eye, but a loss of this when testing the amblyopic eye. This pattern of amblyopic results was replicated in a normal observer by placing a neutral density filter in front of one eye. The two-stage model of binocular contrast gain control [Meese, T.S., Georgeson, M.A. & Baker, D.H. (2006). Binocular contrast vision at and above threshold. Journal of Vision 6, 1224-1243.] was 'lesioned' in several ways to assess the form of the amblyopic deficit. The most successful model involves attenuation of signal and an increase in noise in the amblyopic eye, and intact stages of interocular suppression and binocular summation. This implies a behavioural influence from monocular noise in the amblyopic visual system as well as in normal observers with an ND filter over one eye.

Riser Blood Pressure Pattern Is Associated With Mild Cognitive Impairment in Heart Failure Patients.

PubMed

Komori, Takahiro; Eguchi, Kazuo; Saito, Toshinobu; Nishimura, Yoshioki; Hoshide, Satoshi; Kario, Kazuomi

2016-02-01

The riser pattern, an abnormal blood pressure (BP) rhythm in which sleep BP exceeds awake BP, is a predictor of future stroke events. Although the riser pattern is caused by autonomic dysfunction, its significance in heart failure (HF) patients is not established. HF patients often suffered from cognitive impairment (CI), but the relationship between riser pattern and CI is not clearly understood. We tested the hypothesis that the riser pattern is associated with mild CI, a form of brain damage that could develop to dementia. We performed Mini-Mental State Examination (MMSE), ambulatory BP monitoring (ABPM), echocardiography, and blood tests in 444 HF patients just before leaving hospitals. Mild CI, a measure of cognitive function, was defined as the score <26. The mean age of the patients was 68±13 years; 61.5% were male; 22.5% were riser pattern. The MMSE score was significantly lower in the Riser group than in the Non-dipper and Dipper group (23±4 vs. 25±5, 26±4, respectively, P < 0.01). In multivariable logistic regression analysis, a riser pattern was significantly associated with mild CI (odds ratio 2.38, 95% confidence intervals 1.29-4.42, P < 0.01) after adjusting for significant covariates. The riser pattern was associated with mild CI in HF patients. An abnormal circadian BP rhythm in HF patients is clinically significant as a potential indicator of subclinical brain damage. © American Journal of Hypertension, Ltd 2015. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Assessment of primary healthcare professionals' management of hypertensive patients with riser pattern.

PubMed

Sagarra-Tió, María; Félez-Carrobé, Estel; Baiget, Montserrat; Félez, Jordi

2015-02-01

Ambulatory blood pressure monitoring (ABPM) was implemented in our primary care setting four years ago. Since then, 450 ABPMs have been performed and 69 riser subjects identified. The riser pattern is an independent risk factor for both incidence of cardiovascular events and their associated mortality. The purpose of this study was to assess the amount of control of essential hypertension (EH) among riser patients and to evaluate how our health professionals manage therapeutic changes in riser individuals. This retrospective study involved 34,289 inhabitants served in a centre in the Barcelona metropolitan area. EH individuals (450) were recruited and ABPM was performed following guidelines of the MAPAPRES (www.cardiorisc.com/MP/index_MP.asp). Good control of blood pressure was observed in 46% of dipper and non-dipper subjects but only 35% of riser subjects had blood pressures within good control ranges. The measured cardiovascular risk was either high or very high in 35% of riser individuals. Changes in medication were introduced in riser patients with both good and poor blood pressure control. A second follow-up ABPM was done in only 27% of the riser individuals. In these subjects, therapeutic changes successfully modified ABPM patterns in 87% of cases. Therapeutic changes in riser patients were introduced when these subjects were poorly controlled and these changes were highly effective. Additional ABPM to confirm the effectiveness of therapeutic changes was only performed in some individuals. Thus, for management of riser patients, more specific training of health professionals is needed. © The European Society of Cardiology 2013.

The Ice Bucket Challenge: The public sector should get ready to promptly promote the sustained development of a system of medical care for and research into rare diseases

PubMed Central

Song, Peipei

2014-01-01

Summary In order to promote public awareness and raise charitable donations for patients with amyotrophic lateral sclerosis (ALS), a charity activity known as the “Ice Bucket Challenge” went “viral” from social media in the US to the rest of the world in the summer of 2014. The Challenge had an obvious impact with a large number of participants and increasing charity donations. However, the effort has also garnered criticism for wasting water, possible safety concerns, and its status as a publicity stunt or grandstanding. A system of medical care for and research into rare diseases has been established in some countries in order to protect the rights and interests of patients with rare diseases, but such systems have yet to be established in other countries. An activity like the “Ice Bucket Challenge” is clearly not enough to improve the plight of patients with ALS or other rare diseases. However, the public awareness attracted by this challenge may provide the impetus for those countries that lack a system of medical care for and research into rare diseases to establish such a system. The public sector should bear the responsibility for taking on the important task of promoting the sustained development of a system of medical care for and research into rare diseases. PMID:25364651

30 CFR 57.10008 - Riding tramways.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Direct communication between terminals; (c) Power drives with emergency power available in case of primary power failure; and (d) Buckets equipped with positive locks to prevent accidental tripping or...

30 CFR 56.10008 - Riding tramways.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Direct communication between terminals; (c) Power drives with emergency power available in case of primary power failure; and (d) Buckets equipped with positive locks to prevent accidental tripping or...

30 CFR 56.10008 - Riding tramways.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Direct communication between terminals; (c) Power drives with emergency power available in case of primary power failure; and (d) Buckets equipped with positive locks to prevent accidental tripping or...

30 CFR 56.10008 - Riding tramways.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Direct communication between terminals; (c) Power drives with emergency power available in case of primary power failure; and (d) Buckets equipped with positive locks to prevent accidental tripping or...

30 CFR 56.10008 - Riding tramways.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Direct communication between terminals; (c) Power drives with emergency power available in case of primary power failure; and (d) Buckets equipped with positive locks to prevent accidental tripping or...

30 CFR 57.10008 - Riding tramways.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Direct communication between terminals; (c) Power drives with emergency power available in case of primary power failure; and (d) Buckets equipped with positive locks to prevent accidental tripping or...

30 CFR 57.10008 - Riding tramways.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Direct communication between terminals; (c) Power drives with emergency power available in case of primary power failure; and (d) Buckets equipped with positive locks to prevent accidental tripping or...

30 CFR 57.10008 - Riding tramways.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Direct communication between terminals; (c) Power drives with emergency power available in case of primary power failure; and (d) Buckets equipped with positive locks to prevent accidental tripping or...

All About ALS

MedlinePlus

... by storm with videos of people pouring ice water on themselves for the Ice Bucket Challenge. The worldwide phenomenon raised awareness—and millions of research dollars—for a fatal disease called ALS. ALS ...

Neutron Reference Benchmark Field Specification: ACRR 44 Inch Lead-Boron (LB44) Bucket Environment (ACRR-LB44-CC-32-CL).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vega, Richard Manuel; Parma, Edward J.; Griffin, Patrick J.

2015-07-01

This report was put together to support the International Atomic Energy Agency (IAEA) REAL- 2016 activity to validate the dosimetry community’s ability to use a consistent set of activation data and to derive consistent spectral characterizations. The report captures details of integral measurements taken in the Annular Core Research Reactor (ACRR) central cavity with the 44 inch Lead-Boron (LB44) bucket, reference neutron benchmark field. The field is described and an “a priori” calculated neutron spectrum is reported, based on MCNP6 calculations, and a subject matter expert (SME) based covariance matrix is given for this “a priori” spectrum. The results ofmore » 31 integral dosimetry measurements in the neutron field are reported.« less

Neutron Reference Benchmark Field Specifications: ACRR Polyethylene-Lead-Graphite (PLG) Bucket Environment (ACRR-PLG-CC-32-CL).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vega, Richard Manuel; Parm, Edward J.; Griffin, Patrick J.

2015-07-01

This report was put together to support the International Atomic Energy Agency (IAEA) REAL- 2016 activity to validate the dosimetry community’s ability to use a consistent set of activation data and to derive consistent spectral characterizations. The report captures details of integral measurements taken in the Annular Core Research Reactor (ACRR) central cavity with the Polyethylene-Lead-Graphite (PLG) bucket, reference neutron benchmark field. The field is described and an “a priori” calculated neutron spectrum is reported, based on MCNP6 calculations, and a subject matter expert (SME) based covariance matrix is given for this “a priori” spectrum. The results of 37 integralmore » dosimetry measurements in the neutron field are reported.« less

The Simulation Study of Horizontal Axis Water Turbine Using Flow Simulation Solidworks Application

NASA Astrophysics Data System (ADS)

Prasetyo, H.; Budiana, EP; Tjahjana, DDDP; Hadi, S.

2018-02-01

The design of Horizontal Axis Water Turbine in pico hydro power plants involves many parameters. To simplify that, usually using computer simulation is applied. This research performs simulation process variation on turbine blade number, turbine blade curvature angle, turbine bucket angle and blocking system tilt angle. Those four variations were combined in order to obtain the best design of turbine. The study used Flow Simulation Solidworks application, and obtain data on turbine speed, pressure, force, and torque. However, this research focused on turbine torque value. The best design of turbine was obtained in the turbine with 6 blades, blade curvature angle of 65° and bucket angle of 10°, and blocking system tilt angle of 40°. In the best turbine, the produced torque value was 8.464 Nm.

IBS and possible luminosity improvement for RHIC operation below transition energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fedotov,A.V.

There is a strong interest in low-energy RHIC collisions in the energy range below present RHIC transition energy. These collisions win help to answer one of the key questions in the field of QCD about the existence and location of a critical point on the QCD phase diagram. For such low-energy RHIC operation, particle losses from the RF bucket are of particular concern since the longitudinal beam size is comparable to the existing RF bucket at low energies. In this paper, we explore an Intrabeam Scattering (IBS) feature below transition energy that drives the transverse and longitudinal beam temperatures towardsmore » equilibrium to see whether we can minimize longitudinal diffusion due to IBS and predict some luminosity improvement for the low-energy RHIC project.« less

78 FR 51186 - Proposed Consent Decree, Clean Air Act Citizen Suit

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-20

... Houston, California Communities Against Toxics, Coalition For A Safe Environment, Community In-Power and Development Association, Del Amo Action Committee, Environmental Integrity Project, Louisiana Bucket Brigade...

30 CFR 56.14101 - Brakes.

Code of Federal Regulations, 2014 CFR

2014-07-01

... particular piece of equipment. Front-end loaders shall be tested with the loader bucket empty. Equipment... speed the equipment is traveling except for equipment which is designed for the power train to be...

30 CFR 56.14101 - Brakes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... particular piece of equipment. Front-end loaders shall be tested with the loader bucket empty. Equipment... speed the equipment is traveling except for equipment which is designed for the power train to be...

30 CFR 56.14101 - Brakes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... particular piece of equipment. Front-end loaders shall be tested with the loader bucket empty. Equipment... speed the equipment is traveling except for equipment which is designed for the power train to be...

30 CFR 56.14101 - Brakes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... particular piece of equipment. Front-end loaders shall be tested with the loader bucket empty. Equipment... speed the equipment is traveling except for equipment which is designed for the power train to be...

Listing triangles in expected linear time on a class of power law graphs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nordman, Daniel J.; Wilson, Alyson G.; Phillips, Cynthia Ann

Enumerating triangles (3-cycles) in graphs is a kernel operation for social network analysis. For example, many community detection methods depend upon finding common neighbors of two related entities. We consider Cohen's simple and elegant solution for listing triangles: give each node a 'bucket.' Place each edge into the bucket of its endpoint of lowest degree, breaking ties consistently. Each node then checks each pair of edges in its bucket, testing for the adjacency that would complete that triangle. Cohen presents an informal argument that his algorithm should run well on real graphs. We formalize this argument by providing an analysismore » for the expected running time on a class of random graphs, including power law graphs. We consider a rigorously defined method for generating a random simple graph, the erased configuration model (ECM). In the ECM each node draws a degree independently from a marginal degree distribution, endpoints pair randomly, and we erase self loops and multiedges. If the marginal degree distribution has a finite second moment, it follows immediately that Cohen's algorithm runs in expected linear time. Furthermore, it can still run in expected linear time even when the degree distribution has such a heavy tail that the second moment is not finite. We prove that Cohen's algorithm runs in expected linear time when the marginal degree distribution has finite 4/3 moment and no vertex has degree larger than {radical}n. In fact we give the precise asymptotic value of the expected number of edge pairs per bucket. A finite 4/3 moment is required; if it is unbounded, then so is the number of pairs. The marginal degree distribution of a power law graph has bounded 4/3 moment when its exponent {alpha} is more than 7/3. Thus for this class of power law graphs, with degree at most {radical}n, Cohen's algorithm runs in expected linear time. This is precisely the value of {alpha} for which the clustering coefficient tends to zero asymptotically, and it is in the range that is relevant for the degree distribution of the World-Wide Web.« less

Outcomes after repair of chronic bucket-handle tears of medial meniscus.

PubMed

Espejo-Reina, Alejandro; Serrano-Fernández, José Miguel; Martín-Castilla, Belén; Estades-Rubio, Francisco Javier; Briggs, Karen K; Espejo-Baena, Alejandro

2014-04-01

The purpose of this study was to determine the outcomes after repair of chronic bucket-handle medial meniscal tears by use of magnetic resonance imaging, clinical examination, and patient-reported outcomes. A retrospective review of patients with chronic bucket-handle medial meniscal tears that had been repaired with meniscal sutures was undertaken. The following criteria for inclusion were adopted: minimum tear length of 2 cm and chronic medial meniscal tear identified at the time of arthroscopy. The tears were susceptible to dislocation with probing. Data collected included demographic, clinical, radiologic, and surgical data. Postoperative healing was assessed with the clinical criteria of Barrett et al. The International Knee Documentation Committee rating, Lysholm score, and Tegner activity level were determined, and postoperative magnetic resonance imaging was used to evaluate healing in accordance with the criteria of Henning et al. Twenty-four patients fulfilled the inclusion criteria. The mean time from injury to surgery was 10 months (range, 2 to 60 months). Sixteen patients underwent anterior cruciate ligament reconstruction, 1 patient underwent posterior cruciate ligament reconstruction, and 6 patients underwent meniscus repair only. A median of 5 sutures (range, 3 to 6 sutures) were used for repair. Four cases (all of which had undergone meniscus repair only) required revision. Complete healing was achieved in 83% of cases according to the criteria of Barrett et al. The mean follow-up time was 48 months (range, 24 to 112 months). An International Knee Documentation Committee rating of A or B was achieved in the 20 patients who did not require revision. The median Lysholm score was 95 (range, 92 to 100). The median Tegner activity level before injury was 7, and it remained unchanged after surgery in all cases. This study showed that repair of chronic bucket-handle meniscal tears can lead to good clinical outcomes and a relatively low (17%) failure rate. In addition, repairs of isolated meniscal tears had a significantly higher risk of failure than repairs performed in conjunction with anterior cruciate ligament reconstruction. Level IV, therapeutic case series. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Data Report: Meteorological and Evapotranspiration Data from Sagebrush and Pinyon Pine/Juniper Communities at Pahute Mesa, Nevada National Security Site, 2011-2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jasoni, Richard L; Larsen, Jessica D; Lyles, Brad F.

Pahute Mesa is a groundwater recharge area at the Nevada National Security Site. Because underground nuclear testing was conducted at Pahute Mesa, groundwater recharge may transport radionuclides from underground test sites downward to the water table; the amount of groundwater recharge is also an important component of contaminant transport models. To estimate the amount of groundwater recharge at Pahute Mesa, an INFIL3.0 recharge-runoff model is being developed. Two eddy covariance (EC) stations were installed on Pahute Mesa to estimate evapotranspiration (ET) to support the groundwater recharge modeling project. This data report describes the methods that were used to estimate ETmore » and collect meteorological data. Evapotranspiration was estimated for two predominant plant communities on Pahute Mesa; one site was located in a sagebrush plant community, the other site in a pinyon pine/juniper community. Annual ET was estimated to be 310±13.9 mm for the sagebrush site and 347±15.9 mm for the pinyon pine/juniper site (March 26, 2011 to March 26, 2012). Annual precipitation measured with unheated tipping bucket rain gauges was 179 mm at the sagebrush site and 159 mm at the pinyon pine/juniper site. Annual precipitation measured with bulk precipitation gauges was 222 mm at the sagebrush site and 227 mm at the pinyon pine/juniper site (March 21, 2011 to March 28, 2012). A comparison of tipping bucket versus bulk precipitation data showed that total precipitation measured by the tipping bucket rain gauges was 17 to 20 percent lower than the bulk precipitation gauges. These differences were most likely the result of the unheated tipping bucket precipitation gauges not measuring frozen precipitation as accurately as the bulk precipitation gauges. In this one-year study, ET exceeded precipitation at both study sites because estimates of ET included precipitation that fell during the winter of 2010-2011 prior to EC instrumentation and the precipitation gauges started collecting data in March 2011.« less

Measurement and evaluation of swirl-type flow in labyrinth seals of conventional turbine stages

NASA Technical Reports Server (NTRS)

Hauck, L.

1982-01-01

The effects of load factor and rotor eccentricity were determined on flow conditions in test series for two stages. The results indicate that swirl-type entry flow follows the rules of potential swirl. Within the labyrinth cavities two spatial separated flow areas are considered. A dominating flow in periphera direction nearly fills the space between the sealing strips and the ceiling of the cavity. Below this flow, an area of axial mass transport is situated, with a slight peripheral component, limited on the nearest surroundings of the seals gap and the rotor surface. Between both flows, an exchange of energy takes place. Within the gaps, flow direction depends on axial velocity and therefore on variable flow contraction. A balance of energy within the seal and the cavities interprets the results of lateral force measurements as an influence of friction at the sealing strips surface and the rotating shaft surface. Stages with their blades put together in buckets by means of shrouding segments are particularly influenced by the rotating speed of the shrouding.

Conceptual design of equipment to excavate and transport regolith from the lunar maria

NASA Technical Reports Server (NTRS)

Detwiler, Mark; Foong, Chee Seng; Stocklin, Catherine

1990-01-01

NASA hopes to have a manned lunar outpost completed by 2005. In order to establish the base, regolith must be excavated from the lunar surface. Regolith will be used as a source for life-supporting elements and as radiation shielding for the lunar outpost. The design team from the University of Texas at Austin designed excavation and transportation equipment for initial operations of the lunar base. The design team also characterized the elements to be found in the regolith and determined the power required to excavate regolith. The characterization of the soil was based on a literature review of lunar geography. Power requirements for excavation were developed by adapting terrestrial equations for excavation power requirements and adapting them to lunar soil conditions. The design of the excavation and transportation equipment was broken into three functions: loosing, collecting, and transporting. A scarifier was selected to loosen, a bucket was selected to collect, and a load-haul system was selected to transport. The functions are powered by a modular fuel cell powered vehicle that provides power for motion of the equipment.

7. Historic American Buildings Survey, Edouard E. Exline, Photographer September ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Historic American Buildings Survey, Edouard E. Exline, Photographer September 22, 1935 DETAIL OF BUCKET. - Pounding Mill, Pioneer Museum, Route 441 (moved from Deep Creek), Cherokee, Swain County, NC

Significance of blood pressure variability in patients with sepsis.

PubMed

Pandey, Nishant Raj; Bian, Yu-Yao; Shou, Song-Tao

2014-01-01

This study was undertaken to observe the characteristics of blood pressure variability (BPV) and sepsis and to investigate changes in blood pressure and its value on the severity of illness in patients with sepsis. Blood parameters, APACHE II score, and 24-hour ambulatory BP were analyzed in 89 patients with sepsis. In patients with APACHE II score>19, the values of systolic blood pressure (SBPV), diasystolic blood pressure (DBPV), non-dipper percentage, cortisol (COR), lactate (LAC), platelet count (PLT) and glucose (GLU) were significantly higher than in those with APACHE II score ≤19 (P<0.05), whereas the values of procalcitonin (PCT), white blood cell (WBC), creatinine (Cr), PaO2, C-reactive protein (CRP), adrenocorticotropic hormone (ACTH) and tumor necrosis factor α (TNF-α) were not statistically significant (P>0.05). Correlation analysis showed that APACHE II scores correlated significantly with SBPV and DBPV (P<0.01, r=0.732 and P<0.01, r=0.762). SBPV and DBPV were correlated with COR (P=0.018 and r=0.318; P=0.008 and r=0.353 respectively). However, SBPV and DBPV were not correlated with TNF-α, IL-10, and PCT (P>0.05). Logistic regression analysis of SBPV, DBPV, APACHE II score, and LAC was used to predict prognosis in terms of survival and non-survival rates. Receiver operating characteristics curve (ROC) showed that DBPV was a better predictor of survival rate with an AUC value of 0.890. However, AUC of SBPV, APACHE II score, and LAC was 0.746, 0.831 and 0.915, respectively. The values of SBPV, DBPV and non-dipper percentage are higher in patients with sepsis. DBPV and SBPV can be used to predict the survival rate of patients with sepsis.

Oral operant ethanol self-administration in the absence of explicit cues, food restriction, water restriction and ethanol fading in C57BL/6J mice

PubMed Central

Stafford, Alexandra M.; Anderson, Shawn M.; Shelton, Keith L.; Brunzell, Darlene H.

2015-01-01

Rationale Mouse models of EtOH self-administration are useful to identify genetic and biological underpinnings of alcohol use disorder. Objectives These experiments developed a novel method of oral operant EtOH self-administration in mice without explicitly paired cues, food/water restriction, or EtOH fading. Methods Following magazine and lever training for 0.2% saccharin (SAC), mice underwent 9 weekly overnight sessions with lever pressing maintained by dipper presentation of 0, 3, 10 or 15% EtOH in SAC or water vehicle. Ad libitum water was available from a bottle. Results Water vehicle mice ingested most fluid from the water bottle in contrast to SAC vehicle mice, which despite lever pressing demands, drank most of their fluid from the liquid dipper. Although EtOH in SAC vehicle mice showed concentration-dependent increases of g/kg EtOH intake, lever pressing decreased with increasing EtOH concentration and did not exceed that of SAC vehicle alone at any EtOH concentration. Mice reinforced with EtOH in water ingested less EtOH than mice reinforced with EtOH in SAC. EtOH in water mice, however, showed concentration-dependent increases in g/kg EtOH intake and lever presses. 15% EtOH in water mice showed significantly greater levels of lever pressing than water vehicle mice and a significant escalation of responding across weeks of exposure. Naltrexone pretreatment reduced EtOH self-administration and intake in these mice without altering responding in the vehicle control condition during the first hour of the session. Conclusions SAC facilitated EtOH intake but prevented observation of EtOH reinforcement. Water vehicle unmasked EtOH's reinforcing effects. PMID:26268145

Oral operant ethanol self-administration in the absence of explicit cues, food restriction, water restriction and ethanol fading in C57BL/6J mice.

PubMed

Stafford, Alexandra M; Anderson, Shawn M; Shelton, Keith L; Brunzell, Darlene H

2015-10-01

Mouse models of ethanol (EtOH) self-administration are useful to identify genetic and biological underpinnings of alcohol use disorder. These experiments developed a novel method of oral operant EtOH self-administration in mice without explicitly paired cues, food/water restriction, or EtOH fading. Following magazine and lever training for 0.2 % saccharin (SAC), mice underwent nine weekly overnight sessions with lever pressing maintained by dipper presentation of 0, 3, 10, or 15 % EtOH in SAC or water vehicle. Ad libitum water was available from a bottle. Water vehicle mice ingested most fluid from the water bottle in contrast to SAC vehicle mice, which despite lever pressing demands, drank most of their fluid from the liquid dipper. Although EtOH in SAC vehicle mice showed concentration-dependent increases of g/kg EtOH intake, lever pressing decreased with increasing EtOH concentration and did not exceed that of SAC vehicle alone at any EtOH concentration. Mice reinforced with EtOH in water ingested less EtOH than mice reinforced with EtOH in SAC. EtOH in water mice, however, showed concentration-dependent increases in g/kg EtOH intake and lever presses. Fifteen percent EtOH in water mice showed significantly greater levels of lever pressing than water vehicle mice and a significant escalation of responding across weeks of exposure. Naltrexone pretreatment reduced EtOH self-administration and intake in these mice without altering responding in the vehicle control condition during the first hour of the session. SAC facilitated EtOH intake but prevented observation of EtOH reinforcement. Water vehicle unmasked EtOH's reinforcing effects.

Blood pressure circadian pattern and physical exercise assessment by accelerometer and 7-day physical activity recall scale.

PubMed

García-Ortiz, Luis; Recio-Rodríguez, José I; Puig-Ribera, Anna; Lema-Bartolomé, Jorge; Ibáñez-Jalón, Elisa; González-Viejo, Natividad; Guenaga-Saenz, Nahia; Agudo-Conde, Cristina; Patino-Alonso, Maria C; Gomez-Marcos, Manuel A

2014-05-01

The relationship between regular physical activity, measured objectively and by self-report, and the circadian pattern of 24-hour ambulatory arterial blood pressure (BP) has not been clarified. We performed a cross-sectional study in a cohort of healthy patients. We included 1,345 patients from the EVIDENT study (mean age 55 ± 14 years; 59.3% women). Physical activity was assessed using the 7-day physical activity recall (PAR) questionnaire (metabolic equivalents (MET)/hour/week) and the Actigraph GT3X accelerometer (counts/minute) for 7 days; ambulatory arterial BP was measured with a radial tonometer (B-pro device). The dipper-pattern patients showed a higher level of activity than nondipper patients, as assessed by accelerometer and 7-day PAR. Physical activity measures correlated positively with the percent drop in systolic BP (SBP; ρ = 0.19 to 0.11; P < 0.01) and negatively with the systolic and diastolic sleep to wake ratios (ρ = -0.10 to -0.18; P < 0.01) and heart rate (ρ = -0.13; P < 0.01). In logistic regression, considering the circadian pattern (1, dipper; 0, nondipper) as the dependent variable, the odds ratio of the third tertile of counts/minute was 1.79 (95% confidence interval [CI], 1.35-2.38; P < 0.01) and of MET/hour/week was 1.33 (95% CI, 1.01-1.75; P = 0.04) after adjustment for confounding variables. Physical activity, as evaluated by both the accelerometer and the 7-day PAR, was associated with a more marked nocturnal BP dip and, accordingly, a lower SBP and diastolic BP sleep to wake ratio. Clinical Trials.gov Identifier: NCT01083082.

Increasing ambulatory pulse pressure predicts the development of left ventricular hypertrophy during long-term follow-up.

PubMed

Pääkkö, Tero J W; Perkiömäki, Juha S; Kesäniemi, Y Antero; Ylitalo, Antti S; Lumme, Jarmo A; Huikuri, Heikki V; Ukkola, Olavi H

2018-03-01

Ambulatory blood pressure (ABP) has been shown to have an association with left ventricular hypertrophy (LVH). We evaluated the association between ABP characteristics and the development of LVH during long-term follow-up (20 years) in 420 middle-aged subjects from OPERA cohort. ABP measurements (ABPM) were recorded and echocardiographic examinations were performed at baseline and revisit. Anthropometrics were measured and laboratory analyses performed at visit. The questionnaire presented to all participants elicited detailed information about their habits. Left ventricular mass index (LVMI) was calculated according to Troys method. Baseline LVMI was a significant independent predictor of LVMI change (p < 0.001). None of the baseline continuous ABPM predicted the change in LVMI. A greater increase in daytime and night-time systolic blood pressure (BP) (p from 0.006 to 0.048) and 24 h, daytime and night-time pulse pressure (PP) (p from 0.005 to 0.034) predicted a greater increase in LVMI. Especially the increase in night-time SBP (p = 0.006) and PP (p = 0.005) predicted a greater increase in LVMI. We also considered circadian BP profiles among subjects, whose ABPM at baseline and echocardiographic measurements both at baseline and follow-up were available. Diastolic non-dippers were observed to show a greater increase in LVMI compared to diastolic dippers (10.6 ± 33.0 g/m 2 vs. 7.0 ± 28.8 g/m 2 , p = 0.032), when baseline LVMI and in-office DBP were taken account. These findings suggest that an increasing ambulatory PP increases and a diastolic non-dipping status may increase the risk for the development of LVH during later life course.

Nondipping pattern and carotid atherosclerosis in a middle-aged population: OPERA Study.

PubMed

Vasunta, Riitta-Liisa; Kesäniemi, Y Antero; Ylitalo, Antti; Ukkola, Olavi

2012-01-01

BACKGROUND The lack of dropping in night-time blood pressure of 10% or more (nondipping) seems to associate with cardiovascular risk factors. The relationship between the dipping pattern and atherosclerosis is not clear. The night-time systolic blood pressure (SBP) determines the dipping status. We investigated the connection between intima-media thickness (IMT) and dipping status (dipper, nondipper) taking into account covariates known to associate with hypertension and early atherosclerosis. 900 middle-aged (446 men, 454 women) were studied, 51% of them using blood pressure lowering medication. IMT was measured by a duplex ultrasound from the common carotid artery (CCA), the internal carotid artery (ICA) and the bifurcation enlargement (BIF). The mean IMT was defined as the mean of ICA, BIF, and the 3 highest CCA measurements. Ambulatory blood pressure (ABP) was recorded using the fully automatic SpaceLabs90207 oscillometric unit. Nondippers had lower high-density lipoprotein cholesterol (P = 0.02), higher triglycerides (P < 0.01), body mass index (P < 0.0001) and higher night-time blood pressure (P < 0.0001) than dippers and they were more often nonsmokers (P = 0.01). Increased mean IMT in carotid artery was associated with ABP nondipping pattern (P < 0.01) regardless of conventional cardiovascular risk factors, antihypertensive or lipid lowering medications. Nocturnal blood pressure elevation was independently associated with IMT (P < 0.01). When sexes were analysed separately, the association was seen in men but was only a trend among women. Nondipping status in ABP monitoring is independently associated with early atherosclerosis. Whether nondipping pattern is a predictor of atherosclerosis remains to be explored in a future prospective follow-up of this cohort.

Third floor, showing monorail system, scale (center left), alum dump ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Third floor, showing monorail system, scale (center left), alum dump bucket, and dissolving tanks - Division Avenue Pumping Station & Filtration Plant, West 45th Street and Division Avenue, Cleveland, Cuyahoga County, OH

Cholera Illness and Symptoms

MedlinePlus

... food will lead to additional infections. Dispose of human waste appropriately to prevent the spread of cholera. Persons ... contaminated and properly disposing of contaminated items and human waste. Person washing hands over a bucket of water. ...

30 CFR 57.14101 - Brakes.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Front-end loaders shall be tested with the loader bucket empty. Equipment shall not be tested when... equipment which is designed for the power train to be disengaged during braking. (v) Testing speeds shall be...

30 CFR 57.14101 - Brakes.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Front-end loaders shall be tested with the loader bucket empty. Equipment shall not be tested when... equipment which is designed for the power train to be disengaged during braking. (v) Testing speeds shall be...

30 CFR 57.14101 - Brakes.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... Front-end loaders shall be tested with the loader bucket empty. Equipment shall not be tested when... equipment which is designed for the power train to be disengaged during braking. (v) Testing speeds shall be...

30 CFR 57.14101 - Brakes.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Front-end loaders shall be tested with the loader bucket empty. Equipment shall not be tested when... equipment which is designed for the power train to be disengaged during braking. (v) Testing speeds shall be...

75 FR 47550 - Procurement List; Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... Warfare Center, Indian Head Division, Indian Head, MD Caddy, Bucket and Cleaning Kit NSN: MR 1016 NPA... Barry S. Lineback, Director, Business Operations. [FR Doc. 2010-19451 Filed 8-5-10; 8:45 am] BILLING...

Carrying BioMath education in a Leaky Bucket.

PubMed

Powell, James A; Kohler, Brynja R; Haefner, James W; Bodily, Janice

2012-09-01

In this paper, we describe a project-based mathematical lab implemented in our Applied Mathematics in Biology course. The Leaky Bucket Lab allows students to parameterize and test Torricelli's law and develop and compare their own alternative models to describe the dynamics of water draining from perforated containers. In the context of this lab students build facility in a variety of applied biomathematical tools and gain confidence in applying these tools in data-driven environments. We survey analytic approaches developed by students to illustrate the creativity this encourages as well as prepare other instructors to scaffold the student learning experience. Pedagogical results based on classroom videography support the notion that the Biology-Applied Math Instructional Model, the teaching framework encompassing the lab, is effective in encouraging and maintaining high-level cognition among students. Research-based pedagogical approaches that support the lab are discussed.

Switch over to the high frequency rf systems near transition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brennan, J.M.; Wei, J.

1988-01-01

The purpose of this note is to point out that since bunch narrowing naturally occurs in the acceleration process in the vicinity of transition, it should be possible to switch over to the high frequency system close to transition when the bunch has narrowed enough to fit directly into the high frequency bucket. The advantage of this approach is the simplicity, no extra components or gymnastics are required of the low frequency system. The disadvantage, of course, is for protons which do not go through transition. But on the other hand, there is no shortage of intensity for protons andmore » so it should be possible to keep the phase space area low for protons, and then matching to the high frequency bucket should be easily accomplished by adiabatic compression. 3 refs., 7 figs.« less

Matching CCD images to a stellar catalog using locality-sensitive hashing

NASA Astrophysics Data System (ADS)

Liu, Bo; Yu, Jia-Zong; Peng, Qing-Yu

2018-02-01

The usage of a subset of observed stars in a CCD image to find their corresponding matched stars in a stellar catalog is an important issue in astronomical research. Subgraph isomorphic-based algorithms are the most widely used methods in star catalog matching. When more subgraph features are provided, the CCD images are recognized better. However, when the navigation feature database is large, the method requires more time to match the observing model. To solve this problem, this study investigates further and improves subgraph isomorphic matching algorithms. We present an algorithm based on a locality-sensitive hashing technique, which allocates quadrilateral models in the navigation feature database into different hash buckets and reduces the search range to the bucket in which the observed quadrilateral model is located. Experimental results indicate the effectivity of our method.

Seasonality on the rainfall partitioning of a fast-growing tree plantation under Mediterranean conditions

NASA Astrophysics Data System (ADS)

molina, antonio; llorens, pilar; biel, carme

2014-05-01

Studies on rainfall interception in fast-growing tree plantations are less numerous than those in natural forests. Trees in these plantations are regularly distributed, and the canopy cover is clumped but changes quickly, resulting on high variability in the volume and composition of water that reach the soil. In addition, irrigation supply is normally required in semiarid areas to get optimal wood production; consequently, knowing rainfall interception and its yearly evolution is crucial to manage the irrigation scheme properly. This work studies the rainfall partitioning seasonality in a cherry tree (Prunus avium) plantation orientated to timber production under Mediterranean conditions. The monitoring design started on March 2012 and consists of a set of 58 throughfall tipping buckets randomly distributed (based on a 1x1 m2 grid) in a plot of 128 m2 with 8 trees. Stemflow is measured in all the trees with 2 tipping buckets and 6 accumulative collectors. Canopy cover is regularly measured throughout the study period, in leaf and leafless periods, by mean of sky-orientated photographs taken 50 cm above the center of each tipping bucket. Others tree biometrics are also measured such as diameter and leaf area index. Meteorological conditions are measured at 2 m above the forest cover. This work presents the first analyses describing the rainfall partitioning and its dependency on canopy cover, distance to tree and meteorological conditions. The modified Gash' model for rainfall interception in dispersed vegetation is also preliminary evaluated.

If You Understand Leaky Buckets, You Understand a Lot of Physics.

ERIC Educational Resources Information Center

Ruby, Lawrence

1991-01-01

Applications of this model to problems associated with basic phenomena in radioactivity, heat transfer, neutron chain reactions, RC circuits and vacuum pumping are presented. Example computations for each situation are included. (CW)

46 CFR 185.512 - Recommended emergency instructions format.

Code of Federal Regulations, 2011 CFR

2011-10-01

... in bilges. Use power driven bilge pump, hand pump, and buckets to dewater. (iii) Align fire pumps to... fixed extinguishing system if installed. (v) Maneuver vessel to minimize effect of wind on fire. (vi) If...

Evaluation of the Exceedance Rate of a Stationary Stochastic Process by Statistical Extrapolation Using the Envelope Peaks over Threshold (EPOT) Method

DTIC Science & Technology

2011-04-01

this limitation the length of the windows needs to be shortened. It is also leads to a narrower confidence interval, see Figure 2.9. 82 The " big ...least one event will occur within the window. The windows are then grouped in sets of two and the process is reapeated for a window size twice as big ...0 505 T. Fu 1 506 D. Walden 1 508 J. Brown 1 55 T.Applebee 0 55 M. Dipper 1 551 T. Smith I 551 C. Bassler 3 3 551 V. Belenky 1 551 W. Belknap

Cherry picker at end of Train Shed with arm fully ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Cherry picker at end of Train Shed with arm fully extended and photographer in bucket - Central of Georgia Railway, Passenger Station & Train Shed, Corner of Louisville (Railroad) Road & West Broad Street, Savannah, Chatham County, GA

Simulation study on beam loss in the alpha bucket regime during SIS-100 proton operation

NASA Astrophysics Data System (ADS)

Sorge, S.

2018-02-01

Crossing the transition energy γt in synchrotrons for high intensity proton beams requires well tuned jump schemes and is usually accompanied by longitudinal emittance growth. In order to avoid γt crossing during proton operation in the projected SIS-100 synchrotron special high-γt lattice settings have been developed, in order to keep γt above the beam extraction energy. A further advantage of this scheme is the formation of alpha buckets which naturally lead to short proton bunches, required for the foreseen production and storage of antiprotons for the FAIR facility. Special attention is turned on the imperfections of the superconducting SIS-100 magnets because together with the high-γt lattice settings, they could potentially lead to enhanced beam loss. The aim of the present work is to estimate the beam loss by means of particle tracking simulations.

Multispectral computational ghost imaging with multiplexed illumination

NASA Astrophysics Data System (ADS)

Huang, Jian; Shi, Dongfeng

2017-07-01

Computational ghost imaging has attracted wide attention from researchers in many fields over the last two decades. Multispectral imaging as one application of computational ghost imaging possesses spatial and spectral resolving abilities, and is very useful for surveying scenes and extracting detailed information. Existing multispectral imagers mostly utilize narrow band filters or dispersive optical devices to separate light of different wavelengths, and then use multiple bucket detectors or an array detector to record them separately. Here, we propose a novel multispectral ghost imaging method that uses one single bucket detector with multiplexed illumination to produce a colored image. The multiplexed illumination patterns are produced by three binary encoded matrices (corresponding to the red, green and blue colored information, respectively) and random patterns. The results of the simulation and experiment have verified that our method can be effective in recovering the colored object. Multispectral images are produced simultaneously by one single-pixel detector, which significantly reduces the amount of data acquisition.

Improved Seasonal Prediction of European Summer Temperatures With New Five-Layer Soil-Hydrology Scheme

NASA Astrophysics Data System (ADS)

Bunzel, Felix; Müller, Wolfgang A.; Dobrynin, Mikhail; Fröhlich, Kristina; Hagemann, Stefan; Pohlmann, Holger; Stacke, Tobias; Baehr, Johanna

2018-01-01

We evaluate the impact of a new five-layer soil-hydrology scheme on seasonal hindcast skill of 2 m temperatures over Europe obtained with the Max Planck Institute Earth System Model (MPI-ESM). Assimilation experiments from 1981 to 2010 and 10-member seasonal hindcasts initialized on 1 May each year are performed with MPI-ESM in two soil configurations, one using a bucket scheme and one a new five-layer soil-hydrology scheme. We find the seasonal hindcast skill for European summer temperatures to improve with the five-layer scheme compared to the bucket scheme and investigate possible causes for these improvements. First, improved indirect soil moisture assimilation allows for enhanced soil moisture-temperature feedbacks in the hindcasts. Additionally, this leads to improved prediction of anomalies in the 500 hPa geopotential height surface, reflecting more realistic atmospheric circulation patterns over Europe.

Environmental monitoring in a laboratory animal facility.

PubMed

Wellstood-Nuesse, S; Shields, R P

1976-08-01

A study was made of the microbial environmental status of an animal facility. Cultures were made of animal and surgical room floors; the germicidal effectiveness of the phenolic disinfectant-detergent employed in the facility was tested against standard test organisms as well as against other microorganisms isolated from the facility, and killing power of the disinfectant-detergent was evaluated during various steps of the usual cleaning procedures, ie, mops and mop bucket solutions were tested before, during, and after mopping a room. It was found that colony counts for animal rooms cleaned with a chlorhexidine disinfectant were much lower than those cleaned with a phenolic disinfectant. The phenolic disinfectant killed some organisms after 10 min exposure, but no others. Pseudomonads were the most resistant organisms. Contaminated mops and mop bucket solutions appeared responsible for the high counts on floors cleaned with the phenolic disinfectant. Guidelines for achievable levels of cleanliness were suggested.

Simultaneous multicolor imaging of wide-field epi-fluorescence microscopy with four-bucket detection

PubMed Central

Park, Kwan Seob; Kim, Dong Uk; Lee, Jooran; Kim, Geon Hee; Chang, Ki Soo

2016-01-01

We demonstrate simultaneous imaging of multiple fluorophores using wide-field epi-fluorescence microscopy with a monochrome camera. The intensities of the three lasers are modulated by a sinusoidal waveform in order to excite each fluorophore with the same modulation frequency and a different time-delay. Then, the modulated fluorescence emissions are simultaneously detected by a camera operating at four times the excitation frequency. We show that two different fluorescence beads having crosstalk can be clearly separated using digital processing based on the phase information. In addition, multiple organelles within multi-stained single cells are shown with the phase mapping method, demonstrating an improved dynamic range and contrast compared to the conventional fluorescence image. These findings suggest that wide-field epi-fluorescence microscopy with four-bucket detection could be utilized for high-contrast multicolor imaging applications such as drug delivery and fluorescence in situ hybridization. PMID:27375944

Transmissibility of the Ice Bucket Challenge among globally influential celebrities: retrospective cohort study.

PubMed

Ni, Michael Y; Chan, Brandford H Y; Leung, Gabriel M; Lau, Eric H Y; Pang, Herbert

2014-12-16

To estimate the transmissibility of the Ice Bucket Challenge among globally influential celebrities and to identify associated risk factors. Retrospective cohort study. Social media (YouTube, Facebook, Twitter, Instagram). David Beckham, Cristiano Ronaldo, Benedict Cumberbatch, Stephen Hawking, Mark Zuckerberg, Oprah Winfrey, Homer Simpson, and Kermit the Frog were defined as index cases. We included contacts up to the fifth generation seeded from each index case and enrolled a total of 99 participants into the cohort. Basic reproduction number R0, serial interval of accepting the challenge, and odds ratios of associated risk factors based on fully observed nomination chains; R0 is a measure of transmissibility and is defined as the number of secondary cases generated by a single index in a fully susceptible population. Serial interval is the duration between onset of a primary case and onset of its secondary cases. Based on the empirical data and assuming a branching process we estimated a mean R0 of 1.43 (95% confidence interval 1.23 to 1.65) and a mean serial interval for accepting the challenge of 2.1 days (median 1 day). Higher log (base 10) net worth of the participants was positively associated with transmission (odds ratio 1.63, 95% confidence interval 1.06 to 2.50), adjusting for age and sex. The Ice Bucket Challenge was moderately transmissible among a group of globally influential celebrities, in the range of the pandemic A/H1N1 2009 influenza. The challenge was more likely to be spread by richer celebrities, perhaps in part reflecting greater social influence. © Ni et al 2014.

Arsenic removal with composite iron matrix filters in Bangladesh: a field and laboratory study.

PubMed

Neumann, Anke; Kaegi, Ralf; Voegelin, Andreas; Hussam, Abul; Munir, Abul K M; Hug, Stephan J

2013-05-07

The main arsenic mitigation measures in Bangladesh, well-switching and deep tube wells, have reduced As exposure, but water treatment is important where As-free water is not available. Zero-valent iron (ZVI) based SONO household filters, developed in Bangladesh, remove As by corrosion of locally available inexpensive surplus iron and sand filtration in two buckets. We investigated As removal in SONO filters in the field and laboratory, covering a range of typical groundwater concentrations (in mg/L) of As (0.14-0.96), Fe (0-17), P (0-4.4), Ca (45-162), and Mn (0-2.8). Depending on influent Fe(II) concentrations, 20-80% As was removed in the top sand layer, but As removal to safe levels occurred in the ZVI-layer of the first bucket. Residual As, Fe, and Mn were removed after re-aeration in the sand of the second bucket. New and over 8-year-old filters removed As to <50 μg/L and mostly to <10 μg/L and Mn to <0.2 mg/L. Vertical concentration profiles revealed formation of Fe(II) by corrosion of Fe(0) with O2 and incorporation of As into forming amorphous Fe phases in the composite iron matrix (CIM) of newer filters and predominantly magnetite in older filters. As mass balances indicated that users filtered less than reported volumes of water, pointing to the need for more educational efforts. All tested SONO filters provided safe drinking water without replacement for up to over 8 years of use.

Investigation clogging dynamic of permeable pavement systems using embedded sensors

NASA Astrophysics Data System (ADS)

Razzaghmanesh, Mostafa; Borst, Michael

2018-02-01

Permeable pavement is a stormwater control measure commonly selected in both new and retrofit applications. However, there is limited information about the clogging mechanism of these systems that effects the infiltration. A permeable pavement site located at the Seitz Elementary School, on Fort Riley, Kansas was selected for this study. An 80-space parking lot was built behind the school as part of an EPA collaboration with the U.S. Army. The parking lot design includes a permeable interlocking concrete pavement section along the downgradient edge. This study monitored the clogging progress of the pavement section using twelve water content reflectometers and three buried tipping bucket rain gauges. This clogging dynamic investigation was divided into three stages namely pre-clogged, transitional, and clogged. Recorded initial relative water content of all three stages were significantly and negatively correlated to antecedent dry weather periods with stronger correlations during clogged conditions. The peak relative water content correlation with peak rainfall 10-min intensity was significant for the water content reflectometers located on the western edge away from the eastern edge; this correlation was strongest during transition stage. Once clogged, rainfall measurements no longer correlated with the buried tipping bucket rain gauges. Both water content reflectometers and buried tipping bucket rain gauges showed the progress of surface clogging. For every 6 mm of rain, clogging advanced 1 mm across the surface. The results generally support the hypothesis that the clogging progresses from the upgradient to the downgradient edge. The magnitude of the contributing drainage area and rainfall characteristics are effective factors on rate and progression of clogging.

Keeping clean water clean in a Malawi refugee camp: a randomized intervention trial.

PubMed Central

Roberts, L.; Chartier, Y.; Chartier, O.; Malenga, G.; Toole, M.; Rodka, H.

2001-01-01

OBJECTIVE: This study was undertaken to assess the ability of a water container with a cover and a spout to prevent household contamination of water in a Malawian refugee camp. METHODS: A randomized trial was conducted in a refugee population that had experienced repeated outbreaks of cholera and diarrhoea and where contamination of water in the home was found to be a significant cause of cholera. Four hundred Mozambican refugee households were systematically identified and followed over a 4-month period, one fourth of the households were randomly assigned to exclusively use the improved container for water collection. FINDINGS: Water flowing from the source wells had little or no microbial contamination although the water collectors quickly contaminated their water, primarily through contact with their hands. Analysis of water samples demonstrated that there was a 69% reduction in the geometric mean of faecal coliform levels in household water and 31% less diarrhoeal disease (P = 0.06) in children under 5 years of age among the group using the improved bucket. Regression models examining diarrhoea among under 5-year-olds confirmed the protective effect of the bucket and found that visible faeces in the family latrine and the presence of animals were significantly associated with an increased diarrhoeal incidence in children. CONCLUSION: Household contamination of drinking-water significantly contributed to diarrhoea in this population. Proper chlorination is a less expensive and more effective means of water quality protection in comparison with the improved bucket, but was unpopular and rarely utilized by the camp inhabitants. PMID:11357205

Design and initial evaluation of a portable in situ runoff and sediment monitoring device

NASA Astrophysics Data System (ADS)

Sun, Tao; Cruse, Richard M.; Chen, Qiang; Li, Hao; Song, Chunyu; Zhang, Xingyi

2014-11-01

An inexpensive portable runoff and sediment monitoring device (RSMD) requiring no external electric power was developed for measuring water runoff and associated sediment loss from field plots ranging from 0.005 to 0.1 ha. The device consists of runoff gauge, sediment mixing and sectional subsampling assemblies. The runoff hydrograph is determined using a calibrated tipping bucket. The sediment mixing assembly minimizes fluid splash while mixing the runoff water/sediment mixture prior to subsampling this material. Automatic flow-proportional sampling utilizes mechanical power supplied by the tipping bucket action, with power transmitted to the sample collection assembly via the tipping bucket pivot bar. Runoff is well-mixed and subdivided twice before subsamples are collected for analysis. The resolution of this device for a 100 m2 plot is 0.025 mm of runoff; the device is able to capture maximum flow rates up to 82 mm h-1 in a plot of the same dimension. Calibration results indicated the maximum error is 2.1% for estimating flow rate and less than 10% for sediment concentration in most of the flow range. The RSMD was assessed by measuring field runoff and soil loss from different tillage and slope treatments for a single natural rainfall event. Results were in close agreement with those in published literature, giving additional evidence that this device is performing acceptably well. The RSMD is uniquely adapted for a wide range of field sites, especially for those without electric power, making it a useful tool for studying soil management strategies.

23. DETAIL VIEW IN COAL TOWER No. 1 (WEST) OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. DETAIL VIEW IN COAL TOWER No. 1 (WEST) OF THE MECHANISM THAT OPERATES THE COAL BUCKETS, FACING NORTH - Delaware County Electric Company, Chester Station, Delaware River at South end of Ward Street, Chester, Delaware County, PA

Integrated light maintenance and inspection system for high-mast poles.

DOT National Transportation Integrated Search

2005-01-01

Virginia highway high-mast light poles must be inspected periodically for structural defects to prevent failures. The visual inspection methods currently used include use of binoculars and telescopes and up-close inspection with bucket trucks. These ...

46 CFR 131.340 - Recommended placard for emergency instructions.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Keep bilges dry to prevent loss of stability from water in bilges. Use power-driven bilge pump, hand pump, and buckets to dewater. (3) Align fire pumps to serve as bilge pumps if possible. (4) Check, for...

46 CFR 131.340 - Recommended placard for emergency instructions.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Keep bilges dry to prevent loss of stability from water in bilges. Use power-driven bilge pump, hand pump, and buckets to dewater. (3) Align fire pumps to serve as bilge pumps if possible. (4) Check, for...

46 CFR 131.340 - Recommended placard for emergency instructions.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Keep bilges dry to prevent loss of stability from water in bilges. Use power-driven bilge pump, hand pump, and buckets to dewater. (3) Align fire pumps to serve as bilge pumps if possible. (4) Check, for...

46 CFR 122.512 - Recommended emergency instructions format.

Code of Federal Regulations, 2014 CFR

2014-10-01

... in the vessel. (ii) Keep bilges dry to prevent loss of stability due to water in bilges. Use power driven bilge pump, hand pump, and buckets to dewater. (iii) Align fire pumps to use as bilge pump if...

46 CFR 122.512 - Recommended emergency instructions format.

Code of Federal Regulations, 2013 CFR

2013-10-01

... in the vessel. (ii) Keep bilges dry to prevent loss of stability due to water in bilges. Use power driven bilge pump, hand pump, and buckets to dewater. (iii) Align fire pumps to use as bilge pump if...

46 CFR 122.512 - Recommended emergency instructions format.

Code of Federal Regulations, 2012 CFR

2012-10-01

... in the vessel. (ii) Keep bilges dry to prevent loss of stability due to water in bilges. Use power driven bilge pump, hand pump, and buckets to dewater. (iii) Align fire pumps to use as bilge pump if...

4. LOOKING SOUTHEAST INSIDE OF ELECTRIC FURNACE BUILDING ON GROUND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. LOOKING SOUTHEAST INSIDE OF ELECTRIC FURNACE BUILDING ON GROUND FLOOR OF CHARGING AISLE. VIEW OF 50 TON CAPACITY CHARGING BUCKET. - U.S. Steel Duquesne Works, Electric Furnace Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

Hazardous Waste Cleanup: White Mop Wringer Company in Fultonville, New York

EPA Pesticide Factsheets

White Mop Wringer Company is located on Riverside Drive in Fultonville, New York. White Mop Wringer (WMW) is a manufacturing company producing mop wringers, buckets, dust pans, mopping tanks and other receptacles. During manufacturing, products undergo

Thermochemical Processes | Bioenergy | NREL

Science.gov Websites

model catalysts appear on a montage of images of wood chips, liquid gasoline, a gas tanker truck, and a , pipes, and hoses, pouring a liquid from a large hose into a bucket. Integration, Scale-Up, and Piloting

Affordable Acoustic Disdrometer: Design, Calibration, Tests

NASA Astrophysics Data System (ADS)

van de Giesen, N.; Degen, C.; Hut, R.

2009-12-01

It would be a hydrological understatement to say that measuring rainfall correctly is important. Recent years have seen important lowering of the costs of raingauges capable of measuring rainfall intensities. Such raingauges are typically tipping bucket raingauges, connected to an event logger. Costs for such a raingauge are about 100. Accuracy is not always very high, especially during high intensity storms. The moving parts make them vulnerable to slight disruptions such as insects. We set out to design a raingauge without moving parts and at a better price/quality ratio than existing raingauges. After testing several potential candidates, we settled on a very simple piezo ceramic element, which measures the impact of single drops. Such an element costs around 1. The impact of each drop causes an acoustic signal that is transformed into a voltage. A typical impact gives an upswing of up to 1 V and the ringing lasts about 50 ms. With a surface area of about 20 cm2, there is almost never overlap between the signals of different drops. The basic assumption is that each drop will have reached terminal velocity and that the total energy of the impact can, thereby, be related to drop size. We calibrated this acoustic disdrometer by letting drops of different size fall on the disdrometer. A very encouraging calibration curve was obtained in this way. Further testing consisted of comparisons during rainstorms between the acoustic disdrometer and standard tipping bucket raingauges. During intensive storms, the acoustic disdrometer gave results that were very close to those of a nearby totaling raingauge. The signal of the tipping bucket raingauges was clearly saturated as these were not capable of keeping up with the rain. During low intensity events, tipping bucket raingauges performed better as drops too small to detect by the acoustic disdrometer became a significant part of the total rainfall. In first instance, a simple MP3 player with recording functionality ($50) was used as datalogger and processing was performed with a Matlab script. Presently, processing is done on-board of a simple custom built logger that logs the time and total energy of each drop. Post-processing converts the total energy to drop size and corrects for missing small drops by fitting the pdf’s to known raindrop distributions.

External quality-assurance results for the National Atmospheric Deposition Program/National Trends Network, 1997-99

USGS Publications Warehouse

Gordon, John D.; Latysh, Natalie E.; Lindholm, Sandy J.

2003-01-01

Five external quality-assurance programs were operated by the U.S. Geological Survey for the National Atmospheric Deposition Program/ National Trends Network (NADP/NTN) during 1997 through 1999: the intersite-comparison program, the blind-audit program, the field- audit program, the interlaboratory-comparison program, and the collocated-sampler program. The intersite-comparison program assesses the accuracy of pH and specific-conductance determinations made by NADP/NTN site operators. In two 1997 intersite-comparison studies, 83.7 and 85.8 percent of the pH determinations met the NADP/NTN accuracy goals, whereas 97.3 and 92.4 percent of the specific-conductance determinations met the NADP/NTN accuracy goals. The percentage of pH and specific-conductance determinations that met the accuracy goals in 1998 were, for the most part, higher than in 1997. In two 1998 studies, 90.9 and 90.3 percent of the pH determinations met the accuracy goals compared to 94.7 and 96.0 percent of the specific- conductance measurements meeting the accuracy goals. In one 1999 intersite-comparison study, 89.5 percent and 99.4 percent of pH and specific- conductance determinations, respectively, met the NADP/NTN accuracy goals. The blind-audit program evaluates the effects of routine sample handling, processing, and shipping on the analytical bias and precision of weekly precipitation samples. A portion of the blind-audit sample subject to the normal onsite handling and processing of a weekly precipitation sample is referred to as the bucket portion, whereas the portion receiving only minimal handling is referred to as the bottle portion. Positive bias in regard to blind-audit results indicates that the bucket portion has a higher concentration than the bottle portion. The paired t-test for the 1997 through 1999 blind- audit data indicates that routine sample handling, processing, and shipping introduced a positive bias (a=0.05) for calcium and chloride and a negative bias (cz=0.05) for hydrogen ion. During 1997 through 1999, the median paired differences between the bucket and bottle portions ranged from 0.00 milligram per liter for nitrate and ammonium to +0.010 milligram per liter for both chloride and sulfate. The median paired difference between the bucket and bottle portions for hydrogen ion was -1.086 microequivalents per liter, whereas for specific conductance, the median paired difference between the bucket and bottle portions was -0.200 microsiemen per centimeter during 1997 through 1999. Surface-chemistry effects due to variable amounts of precipitation contacting prewashed sample-collection and shipping-container surfaces were studied in the blind-audit program by using three different sample volumes. The sample- collection and shipping containers used for the blind-audit study were obtained from the site operator's supply and could have been used for precipitation samples. Results of a Kruskal-Wallis analysis of variance test of the relation between paired blind-audit sample differences in units of concentration and sample volume were statistically significant for magnesium, chloride, sulfate, and hydrogen ion during 1997 through 1999. Before 1994, at least 5 of the 10 analytes displayed a statistically significant difference between paired blind-audit differences in units of concentration and sample volume, supporting the premise that chemical reactions between the 13-liter bucket shipping container (primarily the butadiene o-ring lid of the shipping container) and the sample, which resulted in an increasing loss of hydrogen ion with increasing volume, have been eliminated by the new l-liter bottle sample- shipping protocol. The field-audit program measures the effects of field exposure, handling, and processing on the chemistry of NADP/NTN precipitation samples. In the field-audit program, the site operator is instructed to process and submit a quality- control sample following a standard 7-day, Tuesday-to-Tuesday sampling period with no

24. DETAIL VIEW IN COAL TOWER No. 1 OF THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. DETAIL VIEW IN COAL TOWER No. 1 OF THE LEVERS THAT MANIPULATE THE COAL BUCKETS, LOOKING OVER THE BOOM - Delaware County Electric Company, Chester Station, Delaware River at South end of Ward Street, Chester, Delaware County, PA

Paint Bucket Polygons

ERIC Educational Resources Information Center

Edwards, Michael Todd; Harper, Suzanne R.

2010-01-01

During a two-week summer professional development workshop, teams of intermediate-level school teachers and college methods instructors crafted mathematics learning modules--activities, lesson plans, work sheets, and technology-oriented tasks--with the primary goal of strengthening students' understanding of various geometric concepts. They recast…

Epistemological Models of the Teacher-Students Interaction in Academic Learning

ERIC Educational Resources Information Center

Yavoruk, Oleg

2017-01-01

This study deals with the most popular forms of the classroom communication related to the scientific cognitive models. The teachers tend to use simple intuitive models to describe the teaching issues: "Bucket theory"; "Knowledge floodlight"; "Interaction"; "Rationalism"; "Criticism";…

30 CFR 77.1908 - Hoist installations; use.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Where crossheads are used, the cage, platform, or bucket shall not be hung more than 10 feet below the... belts shall be worn by all persons required to work in or over any shaft where there is a drop of 10 or...

Maximizing output power of a low-gain laser system.

PubMed

Carroll, D L; Sentman, L H

1993-07-20

Rigrod theory was used to model outcoupled power from a low-gain laser with good accuracy. For a low-gain overtone cw HF chemical laser, Rigrod theory shows that a higher medium saturation yields a higher overall overtone efficiency, but does not necessarily yield a higher measurable power (power in the bucket). For low-absorption-scattering loss overtone mirrors and a 5% penalty in outcoupled power, the intracavity flux and hence the mirror loading may be reduced by more than a factor of 2 when the gain length is long enough to saturate the medium well. For the University of Illinois at Urbana-Champaign overtone laser that has an extensive database with well-characterized mirrors for which the Rigrod parameters g(0) and I(sat) were firmly established, the accuracy to which the reflectivities of high-reflectivity overtone mirrors can be deduced by using measured mirror transmissivities, measured outcoupled power, and Rigrod theory is approximatly ±0.07%. This method of accurately deducing mirror reflectivities may be applicable to other low-gain laser systems that use high-reflectivity mirrors at different wavelengths. The maximum overtone efficiency is estimated to be approximately 80%-100%.

Automated seed manipulation and planting

NASA Technical Reports Server (NTRS)

Garcia, Ray; Herrera, Javier; Holcomb, Scott; Kelly, Paul; Myers, Scott; Rosendo, Manny; Sivitz, Herbert; Wolsefer, Dave

1988-01-01

The Mechanical Division fabricated three seed separators utilizing pressure gradients to move and separate wheat seeds. These separators are called minnow buckets and use air, water, or a combination of both to generate the pressure gradient. Electrostatic fields were employed in the seed separator constructed by the Electrical Division. This separator operates by forcing a temporary electric dipole on the wheat seeds and using charged electrodes to attract and move the seeds. Seed delivery to the hydroponic growth tray is accomplished by the seed cassette. The cassette is compatible with all the seed separators, and it consists of a plastic tube threaded with millipore filter paper. During planting operations, the seeds are placed in an empty cassette. The loaded cassette is then placed in the growth tray and nutrient solution provided. The solution wets the filter paper and capillary action draws the nutrients up to feed the seeds. These seeding systems were tested and showed encouraging results. Seeds were effectively separated and the cassette can support the growth of wheat plants. Problems remaining to be investigated include improving the success of delivering the seeds to the cassette and providing adequate spacing between seeds for the electric separator.

NASA helicopter helps fight fire at KSC

NASA Technical Reports Server (NTRS)

2000-01-01

A NASA helicopter drops water from a special '''bucket''' onto a small fire on Kennedy Space Center grounds. The site is between Kennedy Parkway North and the Indian River. The fire is one of many throughout Central Florida, which is suffering from drought.

KSC00pp1078

NASA Image and Video Library

2000-08-08

A NASA helicopter dips its fire-fighting bucket into the river to pick up and deliver a cargo of water to a wildfire at KSC. Before being extinguished, the fire burned about 20 acres at a site near gate 2C on Kennedy Parkway North (route 3)

KSC-00pp1078

NASA Image and Video Library

2000-08-08

A NASA helicopter dips its fire-fighting bucket into the river to pick up and deliver a cargo of water to a wildfire at KSC. Before being extinguished, the fire burned about 20 acres at a site near gate 2C on Kennedy Parkway North (route 3)

West Nile Virus

MedlinePlus

... at risk. There are no specific vaccines or treatments for human WNV disease. The best way to avoid WNV is to prevent mosquito bites: Use insect repellent Get rid of mosquito breeding sites by emptying standing water from flower pots, buckets or barrels Stay indoors between dusk ...

ARC-1993-AC93-0010-17

NASA Image and Video Library

1993-01-11

Sikorsky UH-60 (USA 82-23748 NASA-748) Airloads research aircraft - Blackhawk helicopter with MUX-Bucket in flight over Livermore, CA. Note: Used in publication in Flight Research at Ames; 57 Years of Development and Validation of Aeronautical Technology NASA SP-1998-3300 fig. 135

Transmissibility of the Ice Bucket Challenge among globally influential celebrities: retrospective cohort study

PubMed Central

Chan, Brandford H Y; Leung, Gabriel M; Lau, Eric H Y; Pang, Herbert

2014-01-01

Objectives To estimate the transmissibility of the Ice Bucket Challenge among globally influential celebrities and to identify associated risk factors. Design Retrospective cohort study. Setting Social media (YouTube, Facebook, Twitter, Instagram). Participants David Beckham, Cristiano Ronaldo, Benedict Cumberbatch, Stephen Hawking, Mark Zuckerberg, Oprah Winfrey, Homer Simpson, and Kermit the Frog were defined as index cases. We included contacts up to the fifth generation seeded from each index case and enrolled a total of 99 participants into the cohort. Main outcome measures Basic reproduction number R0, serial interval of accepting the challenge, and odds ratios of associated risk factors based on fully observed nomination chains; R0 is a measure of transmissibility and is defined as the number of secondary cases generated by a single index in a fully susceptible population. Serial interval is the duration between onset of a primary case and onset of its secondary cases. Results Based on the empirical data and assuming a branching process we estimated a mean R0 of 1.43 (95% confidence interval 1.23 to 1.65) and a mean serial interval for accepting the challenge of 2.1 days (median 1 day). Higher log (base 10) net worth of the participants was positively associated with transmission (odds ratio 1.63, 95% confidence interval 1.06 to 2.50), adjusting for age and sex. Conclusions The Ice Bucket Challenge was moderately transmissible among a group of globally influential celebrities, in the range of the pandemic A/H1N1 2009 influenza. The challenge was more likely to be spread by richer celebrities, perhaps in part reflecting greater social influence. PMID:25514905

Large Aperture "Photon Bucket" Optical Receiver Performance in High Background Environments

NASA Technical Reports Server (NTRS)

Vilnrotter, Victor A.; Hoppe, D.

2011-01-01

The potential development of large aperture groundbased "photon bucket" optical receivers for deep space communications, with acceptable performance even when pointing close to the sun, is receiving considerable attention. Sunlight scattered by the atmosphere becomes significant at micron wavelengths when pointing to a few degrees from the sun, even with the narrowest bandwidth optical filters. In addition, high quality optical apertures in the 10-30 meter range are costly and difficult to build with accurate surfaces to ensure narrow fields-of-view (FOV). One approach currently under consideration is to polish the aluminum reflector panels of large 34-meter microwave antennas to high reflectance, and accept the relatively large FOV generated by state-of-the-art polished aluminum panels with rms surface accuracies on the order of a few microns, corresponding to several-hundred micro-radian FOV, hence generating centimeter-diameter focused spots at the Cassegrain focus of 34-meter antennas. Assuming pulse-position modulation (PPM) and Poisson-distributed photon-counting detection, a "polished panel" photon-bucket receiver with large FOV will collect hundreds of background photons per PPM slot, along with comparable signal photons due to its large aperture. It is demonstrated that communications performance in terms of PPM symbol-error probability in high-background high-signal environments depends more strongly on signal than on background photons, implying that large increases in background energy can be compensated by a disproportionally small increase in signal energy. This surprising result suggests that large optical apertures with relatively poor surface quality may nevertheless provide acceptable performance for deep-space optical communications, potentially enabling the construction of cost-effective hybrid RF/optical receivers in the future.

Post-weaning social and cognitive performance of piglets raised pre-weaning either in a complex multi-suckling group housing system or in a conventional system with a crated sow.

PubMed

van Nieuwamerongen, S E; Mendl, M; Held, S; Soede, N M; Bolhuis, J E

2017-09-01

We studied the social and cognitive performance of piglets raised pre-weaning either in a conventional system with a sow in a farrowing crate (FC) or in a multi-suckling (MS) system in which 5 sows and their piglets could interact in a more physically enriched and spacious environment. After weaning at 4 weeks of age, 8 groups of 4 litter-mates per pre-weaning housing treatment were studied under equal and enriched post-weaning housing conditions. From each pen, one pair consisting of a dominant and a submissive pig was selected, based on a feed competition test (FCT) 2 weeks post-weaning. This pair was used in an informed forager test (IFT) which measured aspects of spatial learning and foraging strategies in a competitive context. During individual training, submissive (informed) pigs learned to remember a bait location in a testing arena with 8 buckets (the same bucket was baited in a search visit and a subsequent relocation visit), whereas dominant (non-informed) pigs always found the bait in a random bucket (search visits only). After learning their task, the informed pigs' individual search visit was followed by a pairwise relocation visit in which they were accompanied by the non-informed pig. Effects of pre-weaning housing treatment were not distinctly present regarding the occurrence of aggression in the FCT and the learning performance during individual training in the IFT. During paired visits, informed and non-informed pigs changed their behaviour in response to being tested pairwise instead of individually, but MS and FC pigs showed few distinct behavioural differences.

Sampling methods, dispersion patterns, and fixed precision sequential sampling plans for western flower thrips (Thysanoptera: Thripidae) and cotton fleahoppers (Hemiptera: Miridae) in cotton.

PubMed

Parajulee, M N; Shrestha, R B; Leser, J F

2006-04-01

A 2-yr field study was conducted to examine the effectiveness of two sampling methods (visual and plant washing techniques) for western flower thrips, Frankliniella occidentalis (Pergande), and five sampling methods (visual, beat bucket, drop cloth, sweep net, and vacuum) for cotton fleahopper, Pseudatomoscelis seriatus (Reuter), in Texas cotton, Gossypium hirsutum (L.), and to develop sequential sampling plans for each pest. The plant washing technique gave similar results to the visual method in detecting adult thrips, but the washing technique detected significantly higher number of thrips larvae compared with the visual sampling. Visual sampling detected the highest number of fleahoppers followed by beat bucket, drop cloth, vacuum, and sweep net sampling, with no significant difference in catch efficiency between vacuum and sweep net methods. However, based on fixed precision cost reliability, the sweep net sampling was the most cost-effective method followed by vacuum, beat bucket, drop cloth, and visual sampling. Taylor's Power Law analysis revealed that the field dispersion patterns of both thrips and fleahoppers were aggregated throughout the crop growing season. For thrips management decision based on visual sampling (0.25 precision), 15 plants were estimated to be the minimum sample size when the estimated population density was one thrips per plant, whereas the minimum sample size was nine plants when thrips density approached 10 thrips per plant. The minimum visual sample size for cotton fleahoppers was 16 plants when the density was one fleahopper per plant, but the sample size decreased rapidly with an increase in fleahopper density, requiring only four plants to be sampled when the density was 10 fleahoppers per plant. Sequential sampling plans were developed and validated with independent data for both thrips and cotton fleahoppers.

Utility of acoustical detection of Coptotermes Formosanus (Isoptera: Rhinotermitidae)

USDA-ARS?s Scientific Manuscript database

The AED 2000 and 2010 are extremely sensitive listening devices which can effectively detect and monitor termite activity through a wave guide (e.g. bolt) both qualitatively and quantitatively. Experiments conducted with one to ten thousand termites from differing colonies infesting wood in buckets...

Bonding titanium to Rene 41 alloy

NASA Technical Reports Server (NTRS)

Scott, R. W.

1972-01-01

Pair of intermediate materials joined by electron beam welding method welds titanium to Rene 41 alloy. Bond is necessary for combining into one structure high strength-to-density ratio titanium fan blades and temperature resistant nickel-base alloy turbine-buckets in VTOL aircraft lift-fan rotor.

40 CFR 60.301 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... from an affected facility at a grain elevator. (i) Capture system means the equipment such as sheds..., railcar, barge, or ship. (l) Grain handling operations include bucket elevators or legs (excluding legs... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Grain Elevators § 60.301 Definitions. As...

40 CFR 60.301 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... from an affected facility at a grain elevator. (i) Capture system means the equipment such as sheds..., railcar, barge, or ship. (l) Grain handling operations include bucket elevators or legs (excluding legs... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Grain Elevators § 60.301 Definitions. As...

40 CFR 60.301 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... from an affected facility at a grain elevator. (i) Capture system means the equipment such as sheds..., railcar, barge, or ship. (l) Grain handling operations include bucket elevators or legs (excluding legs... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Grain Elevators § 60.301 Definitions. As...

40 CFR 60.301 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... from an affected facility at a grain elevator. (i) Capture system means the equipment such as sheds..., railcar, barge, or ship. (l) Grain handling operations include bucket elevators or legs (excluding legs... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Grain Elevators § 60.301 Definitions. As...

40 CFR 60.301 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... from an affected facility at a grain elevator. (i) Capture system means the equipment such as sheds..., railcar, barge, or ship. (l) Grain handling operations include bucket elevators or legs (excluding legs... PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Grain Elevators § 60.301 Definitions. As...

Hard Facts.

ERIC Educational Resources Information Center

Shaw, Richard

1998-01-01

Discusses the selection of floor-care equipment so that the equipment's features and performance attributes can match their intended purposes. Offers tips such as buying only composite-material buckets and wringers, choosing cleaning machines with good maintenance track records, and buying automatic scrubbers that can operate in both large and…

Fabrication of gas turbine water-cooled composite nozzle and bucket hardware employing plasma spray process

DOEpatents

Schilke, Peter W.; Muth, Myron C.; Schilling, William F.; Rairden, III, John R.

1983-01-01

In the method for fabrication of water-cooled composite nozzle and bucket hardware for high temperature gas turbines, a high thermal conductivity copper alloy is applied, employing a high velocity/low pressure (HV/LP) plasma arc spraying process, to an assembly comprising a structural framework of copper alloy or a nickel-based super alloy, or combination of the two, and overlying cooling tubes. The copper alloy is plamsa sprayed to a coating thickness sufficient to completely cover the cooling tubes, and to allow for machining back of the copper alloy to create a smooth surface having a thickness of from 0.010 inch (0.254 mm) to 0.150 inch (3.18 mm) or more. The layer of copper applied by the plasma spraying has no continuous porosity, and advantageously may readily be employed to sustain a pressure differential during hot isostatic pressing (HIP) bonding of the overall structure to enhance bonding by solid state diffusion between the component parts of the structure.