Optical micromanipulation of active cells with minimal perturbations: direct and indirect pushing.

PubMed

Wang, Chenlu; Chowdhury, Sagar; Gupta, Satyandra K; Losert, Wolfgang

2013-04-01

The challenge to wide application of optical tweezers in biological micromanipulation is the photodamage caused by high-intensity laser exposure to the manipulated living systems. While direct exposure to infrared lasers is less likely to kill cells, it can affect cell behavior and signaling. Pushing cells with optically trapped objects has been introduced as a less invasive alternative, but the technique includes some exposure of the biological object to parts of the optical tweezer beam. To keep the cells farther away from the laser, we introduce an indirect pushing-based technique for noninvasive manipulation of sensitive cells. We compare how cells respond to three manipulation approaches: direct manipulation, pushing, and indirect pushing. We find that indirect manipulation techniques lessen the impact of manipulation on cell behavior. Cell survival increases, as does the ability of cells to maintain shape and wiggle. Our experiments also demonstrate that indirect pushing allows cell-cell contacts to be formed in a controllable way, while retaining the ability of cells to change shape and move.

Factors affecting minimum push and pull forces of manual carts.

PubMed

Al-Eisawi, K W; Kerk, C J; Congleton, J J; Amendola, A A; Jenkins, O C; Gaines, W

1999-06-01

The minimum forces needed to manually push or pull a 4-wheel cart of differing weights with similar wheel sizes from a stationary state were measured on four floor materials under different conditions of wheel width, diameter, and orientation. Cart load was increased from 0 to 181.4 kg in increments of 36.3 kg. The floor materials were smooth concrete, tile, asphalt, and industrial carpet. Two wheel widths were tested: 25 and 38 mm. Wheel diameters were 51, 102, and 153 mm. Wheel orientation was tested at four levels: F0R0 (all four wheels aligned in the forward direction), F0R90 (the two front wheels, the wheels furthest from the cart handle, aligned in the forward direction and the two rear wheels, the wheels closest to the cart handle, aligned at 90 degrees to the forward direction), F90R0 (the two front wheels aligned at 90 degrees to the forward direction and the two rear wheels aligned in the forward direction), and F90R90 (all four wheels aligned at 90 degrees to the forward direction). Wheel width did not have a significant effect on the minimum push/pull forces. The minimum push/pull forces were linearly proportional to cart weight, and inversely proportional to wheel diameter. The coefficients of rolling friction were estimated as 2.2, 2.4, 3.3, and 4.5 mm for hard rubber wheels rolling on smooth concrete, tile, asphalt, and industrial carpet floors, respectively. The effect of wheel orientation was not consistent over the tested conditions, but, in general, the smallest minimum push/pull forces were measured with all four wheels aligned in the forward direction, whereas the largest minimum push/pull forces were measured when all four wheels were aligned at 90 degrees to the forward direction. There was no significant difference between the push and pull forces when all four wheels were aligned in the forward direction.

78 FR 32081 - Airworthiness Directives; Aircraft Industries a.s. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-29

... Injection System WATER INJECTION circuit ON breakter. TCL TQ=min. 60% WATER INJECTION/ON push- Push and hold till amber button. WATER INJECTION signal comes on (on the front control panel) Before throttling back power: WATER INJECTION/OFF push- Push and check amber button. WATER INJECTION signal extinguishes...

Demonstration and Validation of GTS Long-Term Monitoring Optimization Software at Military and Government Sites

DTIC Science & Technology

2011-02-01

Defense DoE Department of Energy DPT Direct push technology EPA Environmental Protection Agency ERPIMS Enviromental Restoration Program...and 3) assessing whether new wells should be added and where (i.e., network adequacy). • Predict allows import and comparison of new sampling...data against previously estimated trends and maps. Two options include trend flagging and plume flagging to identify potentially anomalous new values

Geostatistical analysis of centimeter-scale hydraulic conductivity variations at the MADE site

NASA Astrophysics Data System (ADS)

Bohling, Geoffrey C.; Liu, Gaisheng; Knobbe, Steven J.; Reboulet, Edward C.; Hyndman, David W.; Dietrich, Peter; Butler, James J., Jr.

2012-02-01

Spatial variations in hydraulic conductivity (K) provide critical controls on solute transport in the subsurface. Recently, new direct-push tools were developed for high-resolution characterization of K variations in unconsolidated settings. These tools were applied to obtain 58 profiles (vertical resolution of 1.5 cm) from the heavily studied macrodispersion experiment (MADE) site. We compare the data from these 58 profiles with those from the 67 flowmeter profiles that have served as the primary basis for characterizing the heterogeneous aquifer at the site. Overall, the patterns of variation displayed by the two data sets are quite similar, in terms of both large-scale structure and autocorrelation characteristics. The direct-push K values are, on average, roughly a factor of 5 lower than the flowmeter values. This discrepancy appears to be attributable, at least in part, to opposite biases between the two methods, with the current versions of the direct-push tools underestimating K in the highly permeable upper portions of the aquifer and the flowmeter overestimating K in the less permeable lower portions. The vertically averaged K values from a series of direct-push profiles in the vicinity of two pumping tests at the site are consistent with the K estimates from those tests, providing evidence that the direct-push estimates are of a reasonable magnitude. The results of this field demonstration show that direct-push profiling has the potential to characterize highly heterogeneous aquifers with a speed and resolution that has not previously been possible.

NASA Green Propulsion Technologies Pushing Aviation to New Heights

NASA Technical Reports Server (NTRS)

Free, James M.; Jennings, Francis T.; Adanich, Emery; Del Rosario, Ruben; Felder, James L.

2014-01-01

Center Director Free is providing the Keynote at the Disruptive Propulsion Conference, sponsored by Cranfield University, Cranfield, Bedfordshire, England in November. Director Free will be presenting a PowerPoint presentation titled, NASA Green Propulsion Technologies Pushing Aviation to New Heights at both the conference and a meeting at the Royal Aeronautical Society.

The NASA technology push towards future space mission systems

NASA Technical Reports Server (NTRS)

Sadin, Stanley R.; Povinelli, Frederick P.; Rosen, Robert

1988-01-01

As a result of the new Space Policy, the NASA technology program has been called upon to a provide a solid base of national capabilities and talent to serve NASA's civil space program, commercial, and other space sector interests. This paper describes the new technology program structure and its characteristics, traces its origin and evolution, and projects the likely near- and far-term strategic steps. It addresses the alternative 'push-pull' approaches to technology development, the readiness levels to which the technology needs to be developed for effective technology transfer, and the focused technology programs currently being implemented to satisfy the needs of future space systems.

Energy and Economic Trade Offs for Advanced Technology Subsonic Aircraft

NASA Technical Reports Server (NTRS)

Maddalon, D. V.; Wagner, R. D.

1976-01-01

Changes in future aircraft technology which conserve energy are studied, along with the effect of these changes on economic performance. Among the new technologies considered are laminar-flow control, composite materials with and without laminar-flow control, and advanced airfoils. Aircraft design features studied include high-aspect-ratio wings, thickness ratio, and range. Engine technology is held constant at the JT9D level. It is concluded that wing aspect ratios of future aircraft are likely to significantly increase as a result of new technology and the push of higher fuel prices. Composite materials may raise aspect radio to about 11 to 12 and practical laminar flow-control systems may further increase aspect ratio to 14 or more. Advanced technology provides significant reductions in aircraft take-off gross weight, energy consumption, and direct operating cost.

Implications of agricultural transitions and urbanization for ecosystem services.

PubMed

Cumming, Graeme S; Buerkert, Andreas; Hoffmann, Ellen M; Schlecht, Eva; von Cramon-Taubadel, Stephan; Tscharntke, Teja

2014-11-06

Historically, farmers and hunter-gatherers relied directly on ecosystem services, which they both exploited and enjoyed. Urban populations still rely on ecosystems, but prioritize non-ecosystem services (socioeconomic). Population growth and densification increase the scale and change the nature of both ecosystem- and non-ecosystem-service supply and demand, weakening direct feedbacks between ecosystems and societies and potentially pushing social-ecological systems into traps that can lead to collapse. The interacting and mutually reinforcing processes of technological change, population growth and urbanization contribute to over-exploitation of ecosystems through complex feedbacks that have important implications for sustainable resource use.

Wireline system for multiple direct push tool usage

DOEpatents

Bratton, Wesley L.; Farrington, Stephen P.; Shinn, II, James D.; Nolet, Darren C.

2003-11-11

A tool latching and retrieval system allows the deployment and retrieval of a variety of direct push subsurface characterization tools through an embedded rod string during a single penetration without requiring withdrawal of the string from the ground. This enables the in situ interchange of different tools, as well as the rapid retrieval of soil core samples from multiple depths during a single direct push penetration. The system includes specialized rods that make up the rod string, a tool housing which is integral to the rod string, a lock assembly, and several tools which mate to the lock assembly.

Insights from Modelling the Spatial Dependence Structure of Hydraulic Conductivity at the MADE Site Using Spatial Copulas

NASA Astrophysics Data System (ADS)

Haslauer, Claus; Bohling, Geoff

2013-04-01

Hydraulic conductivity (K) is a fundamental parameter that influences groundwater flow and solute transport. Measurements of K are limited and uncertain. Moreover, the spatial structure of K, which impacts the groundwater velocity field and hence directly influences the advective spreading of a solute migrating in the subsurface, is commonly described by approaches using second order moments. Spatial copulas have in the recent past been applied successfully to model the spatial dependence structure of heterogeneous subsurface datasets. At the MADE site, hydraulic conductivity (K) has been measured in exceptional detail. Two independently collected data-sets were used for this study: (1) ~2000 flowmeter based K measurements, and (2) ~20,000 direct-push based K measurements. These datasets exhibit a very heterogeneous (Var[ln(K)]>2) spatially distributed K field. A copula analysis reveals that the spatial dependence structure of the flowmeter and direct-push datasets are essentially the same. A spatial copula analysis factors out the influence of the marginal distribution of the property under investigation. This independence from the marginal distributions allows the copula analysis to reveal the underlying similarity between the spatial dependence structures of the flowmeter and direct-push datasets despite two complicating factors: 1) an overall offset between the datasets, with direct-push K values being, on average, roughly a factor of five lower than flowmeter K values, due at least in part to opposite biases between the two measurement techniques, and 2) the presence of some anomalously high K values in the direct-push dataset due to a lower limit on accurately measureable pressure responses in high-K zones. In addition, the vertical resolution of the direct-push dataset is ten times finer than that of the flowmeter dataset. Upscaling the direct-push data to compensate for this difference resulted in little change to the spatial structure. The objective of the presented work is to use multidimensional spatial copulas to describe and model the spatial dependence of the spatial structure of K at the heterogeneous MADE site, and evaluate the effects of this multidimensional description on solute transport.

Self-Resetting Energy Absorber

NASA Technical Reports Server (NTRS)

De La Fuente, Horacio M.; Nagy, Kornel; Wesselski, Clarence J.

1992-01-01

Device uses friction to dissipate kinetic energy. When moving mass pushes in one direction, it offers substantial friction. Pushed in opposite direction, it offers negligible friction. Built-in spring resets for another shock-absorption cycle. Used in industrial machinery, automobile bumpers and suspensions, and parachute lanyards.

The U.K. Pushes the Boundaries of Bionics: Researchers and Engineers Are Making Great Strides Toward Advanced Prosthetics' Ultimate Goal-Mimicking the Functionality of a Real Limb.

PubMed

Banks, Jim

2016-01-01

Using state-of-the-art technology, athletes at the Paralympic Games achieve great feats of physical prowess, but for most people using assistive and rehabilitative technologies (ART), even simple tasks can present huge challenges. Many do not make full use of the technology available to them because it is unreliable, uncomfortable, and nonintuitive, so researchers are pushing the envelope to create practical solutions that function like real limbs.

Direct-push geochemical profiling for assessment of inorganic chemical heterogeneity in aquifers

USGS Publications Warehouse

Schulmeister, M.K.; Healey, J.M.; Butler, J.J.; McCall, G.W.

2004-01-01

Discrete-depth sampling of inorganic groundwater chemistry is essential for a variety of site characterization activities. Although the mobility and rapid sampling capabilities of direct-push techniques have led to their widespread use for evaluating the distribution of organic contaminants, complementary methods for the characterization of spatial variations in geochemical conditions have not been developed. In this study, a direct-push-based approach for high-resolution inorganic chemical profiling was developed at a site where sharp chemical contrasts and iron-reducing conditions had previously been observed. Existing multilevel samplers (MLSs) that span a fining-upward alluvial sequence were used for comparison with the direct-push profiling. Chemical profiles obtained with a conventional direct-push exposed-screen sampler differed from those obtained with an adjacent MLS because of sampler reactivity and mixing with water from previous sampling levels. The sampler was modified by replacing steel sampling components with stainless-steel and heat-treated parts, and adding an adapter that prevents mixing. Profiles obtained with the modified approach were in excellent agreement with those obtained from an adjacent MLS for all constituents and parameters monitored (Cl, NO3, Fe, Mn, DO, ORP, specific conductance and pH). Interpretations of site redox conditions based on field-measured parameters were supported by laboratory analysis of dissolved Fe. The discrete-depth capability of this approach allows inorganic chemical variations to be described at a level of detail that has rarely been possible. When combined with the mobility afforded by direct-push rigs and on-site methods of chemical analysis, the new approach is well suited for a variety of interactive site-characterization endeavors. ?? 2003 Elsevier B.V. All rights reserved.

USEPA/USGS Sample Collection Protocol for Bacterial ...

EPA Pesticide Factsheets

Report/SOP This Sample Collection Procedure (SCP) describes the activities and considerations for the collection of bacterial pathogens from representative surface soil samples (0-5 cm). This sampling depth can be reached without the use of a drill rig, direct-push technology, or other mechanized equipment. Analizing soil samples for biothreat agents may, for instance, define the extent of contamination or determine whether the concentrations of contaminants present a risk to public health, welfare, or the environment.

Overcoming the Barriers of Civil/Military Industrial Integration and of Buying Commercial Goods and Services

DTIC Science & Technology

2015-05-13

increasing defense required emphasis on “affordability” (DoD should make long -term, high-risk investments in innovative technology (while commercial firms...been followed) 8 NPS Acquisition Research Symposium ~ 5. 13.15 Joint Direct Attack Munitions (JDAM) Program  The JDAM System is a tail kit...prohibitions • Contract Finance/Payments laws • Mandated low profit margins on sales to government • Push for more “insourcing” Examples of U.S

Dentoalveolar growth of patients with complete unilateral cleft lip and palate by early two-stage furlow and push-back method: preliminary results.

PubMed

Kitagawa, Taiji; Kohara, Hiroshi; Sohmura, Taiji; Takahashi, Junzo; Tachimura, Takashi; Wada, Takeshi; Kogo, Mikihiko

2004-09-01

This study examined dentoalveolar growth changes prior to the time of palatoplasty up to 3 years of age by the early two-stage Furlow and push-back methods. Thirty-four Japanese patients with complete unilateral cleft lip and palate (UCLP) treated with either a two-stage Furlow procedure (Furlow group: seven boys, eight girls) from 1998 to 2002 or a push-back procedure (push-back group; 12 boys, 7 girls) from 1993 to 1997. Consecutive plaster models were measured by three-dimensional laser scanner, before primary palatoplasty, before hard palate closure (Furlow group only), and at 3 years of age. Bite measures were taken at 3 years of age. In the Furlow group, arch length, canine width, first and second deciduous molar width and cross-sectional area, and depth and volume at midpoint showed greater growth than in the push-back group. In the Furlow group, the crossbite score was also better than in the push-back group at 3 years of age. In comparison with the push-back group, inhibition of growth impediment in the anterior region was observed in the horizontal direction in the Furlow group. In the midregion, it was observed in the horizontal and vertical directions, and in the posterior region it was observed in the horizontal direction. The results demonstrate that the early two-stage Furlow method showed progressive alveolar growth. Therefore, the early two-stage Furlow method is a more beneficial procedure than the push-back method.

Low carbon and clean energy scenarios for India: Analysis of targets approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shukla, Priyadarshi R.; Chaturvedi, Vaibhav

2012-12-01

Low carbon energy technologies are gaining increasing importance in India for reducing emissions as well as diversifying its energy supply mix. The present paper presents and analyses a targeted approach for pushing solar, wind and nuclear technologies in the Indian energy market. Targets for these technologies have been constructed on the basis of Indian government documents, policy announcements and expert opinion. Different targets have been set for the reference scenario and the carbon price scenario. In the reference scenario it is found that in the long run all solar, wind and nuclear will achieve their targets without any subsidy push.more » In the short run however, nuclear and solar energy require significant subsidy push. Nuclear energy requires a much higher subsidy allocation as compared to solar because the targets assumed are also higher for nuclear energy. Under a carbon price scenario, the carbon price drives the penetration of these technologies significantly. Still subsidy is required especially in the short run when the carbon price is low. It is also found that pushing solar, wind and nuclear technologies might lead to decrease in share of CCS under the price scenario and biomass under both BAU and price scenario, which implies that one set of low carbon technologies is substituted by other set of low carbon technologies. Thus the objective of emission mitigation might not be achieved due to this substitution. Moreover sensitivity on nuclear energy cost was done to represent risk mitigation for this technology and it was found that higher cost can significantly decrease the share of this technology under both the BAU and carbon price scenario.« less

From Research to Flight: Surviving the TRL Valley of Death for Robotic and Human Exploration

NASA Technical Reports Server (NTRS)

Johnson, Les

2009-01-01

Fundamental research is critical to taking the next giant leap in the scientific exploration of space. NASA should be pushing the envelope and asking "what if?" .. Technology push enables new capabilities. When NASA began, everything was enabling. .. Technology pull is often required to meet current mission requirements. Technology management requires more than issuing NRAs and overseeing contracts. Continuous assessment, peer review, and system systems studies are vital to credible TRL advancement. A strategy for taking technology R&D to new heights will lead to discoveries at far-reaching destinations..

MEASURING VERTICAL PROFILES OF HYDRAULIC CONDUCTIVITY WITH IN SITU DIRECT-PUSH METHODS

EPA Science Inventory

U.S. EPA (Environmental Protection Agency) staff developed a field procedure to measure hydraulic conductivity using a direct-push system to obtain vertical profiles of hydraulic conductivity. Vertical profiles were obtained using an in situ field device-composed of a
Geopr...

Midwives’ Verbal Support of Nulliparous Women in Second Stage Labor

PubMed Central

Borders, Noelle; Wendland, Claire; Haozous, Emily; Leeman, Lawrence; Rogers, Rebecca

2013-01-01

Objective To describe how nurse-midwives verbally support nulliparous women during second stage labor and document specific details of each second stage. Design Descriptive qualitative study. Setting A university hospital labor and delivery unit in the southwestern United States. Participants Nulliparous women (N=14) greater than 18 years of age and their attendant midwives (N=9). Methods A single research midwife observed the entire second stage of each woman and used a standardized data collection form to record spontaneous or directed pushing, position changes, open and closed glottis pushing. A digital audio recorder was employed to capture verbal communication between the midwife and laboring woman. The research midwife and two qualitative experts employed content analysis to analyze the audio transcripts and identify categories of verbal support. Results Analysis revealed four categories of verbal support: affirmation, information sharing, direction, and baby talk. The vast majority of verbal communication by nurse-midwives consisted of affirmation and information sharing. Nurse-midwives gave direction for specific reasons. Women pushed spontaneously the majority of the time, regardless of epidural use. Conclusion Nurse-midwives use a range of verbal support strategies to guide the second stage. Directive support was relatively uncommon. Most verbal support instead affirmed a woman’s ability to follow her own body’s lead in second stage labor, with or without epidural. Callouts Our study provides evidence on how nurse-midwives verbally support nulliparous women while they push. Nurse-midwives utilized mostly affirmation and information sharing in their support of women during second stage, regardless of epidural use. Spontaneous pushing and epidural anesthesia are compatible, especially if the woman labors down and feels the urge to push prior to initiating active pushing. PMID:23600405

Effect of the type of maternal pushing during the second stage of labour on obstetric and neonatal outcome: a multicentre randomised trial-the EOLE study protocol.

PubMed

Barasinski, Chloé; Vendittelli, Françoise

2016-12-20

The scientific data currently available do not allow any definitive conclusion to be reached about what type of pushing should be recommended to women during the second stage of labour. The objective of this trial is to assess and compare the effectiveness of directed open-glottis pushing versus directed closed-glottis pushing. Secondary objectives are to assess, according to the type of pushing: immediate maternal and neonatal morbidity, intermediate-term maternal pelvic floor morbidity, uncomplicated birth, and women's satisfaction at 4 weeks post partum. This multicentre randomised clinical trial compares directed closed-glottis pushing (Valsalva) versus directed open-glottis pushing during the second stage of labour in 4 hospitals of France. The study population includes pregnant women who received instruction in both types of pushing, have no previous caesarean delivery, are at term and have a vaginal delivery planned. Randomisation takes place during labour once cervical dilation ≥7 cm. The principal end point is assessed by a composite criterion: spontaneous delivery without perineal lesion (no episiotomy or spontaneous second-degree, third-degree or fourth-degree lacerations). We will need to recruit 125 women per group. The primary analysis will be by intention-to-treat analysis, with the principal results reported as crude relative risks (RRs) with their 95% CIs. A multivariate analysis will be performed to take prognostic and confounding factors into account to obtain adjusted RRs. This study was approved by a French Institutional Review Board (Comité de Protection des Personnes Sud Est 6:N°AU1168). Results will be reported in peer-reviewed journals and at scientific meetings. This study will make it possible to assess the effectiveness of 2 types of directed pushing used in French practice and to assess their potential maternal, fetal and neonatal effects. Findings from the study will be useful for counselling pregnant women before and during labour. Agence national de sécurité du médicament et des produits de santé (ANSM): 150099B-22 and IDRCB: 2014-A01920-47. ClinicalTrials.gov: NCT02474745. Pre-result stage. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Effect of the type of maternal pushing during the second stage of labour on obstetric and neonatal outcome: a multicentre randomised trial—the EOLE study protocol

PubMed Central

Barasinski, Chloé; Vendittelli, Françoise

2016-01-01

Introduction The scientific data currently available do not allow any definitive conclusion to be reached about what type of pushing should be recommended to women during the second stage of labour. The objective of this trial is to assess and compare the effectiveness of directed open-glottis pushing versus directed closed-glottis pushing. Secondary objectives are to assess, according to the type of pushing: immediate maternal and neonatal morbidity, intermediate-term maternal pelvic floor morbidity, uncomplicated birth, and women's satisfaction at 4 weeks post partum. Methods and analysis This multicentre randomised clinical trial compares directed closed-glottis pushing (Valsalva) versus directed open-glottis pushing during the second stage of labour in 4 hospitals of France. The study population includes pregnant women who received instruction in both types of pushing, have no previous caesarean delivery, are at term and have a vaginal delivery planned. Randomisation takes place during labour once cervical dilation ≥7 cm. The principal end point is assessed by a composite criterion: spontaneous delivery without perineal lesion (no episiotomy or spontaneous second-degree, third-degree or fourth-degree lacerations). We will need to recruit 125 women per group. The primary analysis will be by intention-to-treat analysis, with the principal results reported as crude relative risks (RRs) with their 95% CIs. A multivariate analysis will be performed to take prognostic and confounding factors into account to obtain adjusted RRs. Ethics and dissemination This study was approved by a French Institutional Review Board (Comité de Protection des Personnes Sud Est 6:N°AU1168). Results will be reported in peer-reviewed journals and at scientific meetings. This study will make it possible to assess the effectiveness of 2 types of directed pushing used in French practice and to assess their potential maternal, fetal and neonatal effects. Findings from the study will be useful for counselling pregnant women before and during labour. Trial registration number Agence national de sécurité du médicament et des produits de santé (ANSM): 150099B-22 and IDRCB: 2014-A01920-47. ClinicalTrials.gov: NCT02474745. Pre-result stage. PMID:27998899

ISS Live!

NASA Technical Reports Server (NTRS)

Price, Jennifer; Harris, Philip; Hochstetler, Bruce; Guerra, Mark; Mendez, Israel; Healy, Matthew; Khan, Ahmed

2013-01-01

International Space Station Live! (ISSLive!) is a Web application that uses a proprietary commercial technology called Lightstreamer to push data across the Internet using the standard http port (port 80). ISSLive! uses the push technology to display real-time telemetry and mission timeline data from the space station in any common Web browser or Internet- enabled mobile device. ISSLive! is designed to fill a unique niche in the education and outreach areas by providing access to real-time space station data without a physical presence in the mission control center. The technology conforms to Internet standards, supports the throughput needed for real-time space station data, and is flexible enough to work on a large number of Internet-enabled devices. ISSLive! consists of two custom components: (1) a series of data adapters that resides server-side in the mission control center at Johnson Space Center, and (2) a set of public html that renders the data pushed from the data adapters. A third component, the Lightstreamer server, is commercially available from a third party and acts as an intermediary between custom components (1) and (2). Lightstreamer also provides proprietary software libraries that are required to use the custom components. At the time of this reporting, this is the first usage of Web-based, push streaming technology in the aerospace industry.

Optical Pulling and Pushing Forces in Bilayer P T -Symmetric Structures

NASA Astrophysics Data System (ADS)

Alaee, Rasoul; Christensen, Johan; Kadic, Muamer

2018-01-01

We investigate the optical force exerted on a parity-time-symmetric bilayer made of balanced gain and loss. We show that an asymmetric optical pulling or pushing force can be exerted on this system depending on the direction of impinging light. The optical pulling or pushing force has a direct physical link to the optical characteristics embedded in the non-Hermitian bilayer. Furthermore, we suggest taking advantage of the optically generated asymmetric force to launch vibrations of an arbitrary shape, which is useful for the contactless probing of mechanical deformations.

Muscular contribution to low-back loading and stiffness during standard and suspended push-ups.

PubMed

Beach, Tyson A C; Howarth, Samuel J; Callaghan, Jack P

2008-06-01

Push-up exercises are normally performed to challenge muscles that span upper extremity joints. However, it is also recognized that push-ups provide an effective abdominal muscle challenge, especially when the hands are in contact with a labile support surface. The purpose of this study was to compare trunk muscle activation levels and resultant intervertebral joint (IVJ) loading when standard and suspended push-ups were performed, and to quantify and compare the contribution of trunk muscles to IVJ rotational stiffness in both exercises. Eleven recreationally trained male volunteers performed sets of standard and suspended push-ups. Upper body kinematic, kinetic, and EMG data were collected and input into a 3D biomechanical model of the lumbar torso to quantify lumbar IVJ loading and the contributions of trunk muscles to IVJ rotational stiffness. When performing suspended push-ups, muscles of the abdominal wall and the latissimus dorsi were activated to levels that were significantly greater than those elicited when performing standard push-ups (p<.05). As a direct result of these increased activation levels, model-predicted muscle forces increased and consequently led to significantly greater mean (p=.0008) and peak (p=.0012) lumbar IVJ compressive forces when performing suspended push-ups. Also directly resulting from the increased activation levels of the abdominal muscles and the latissimus dorsi during suspended push-ups was increased muscular contribution to lumbar IVJ rotational stiffness (p<.05). In comparison to the standard version of the exercise, suspended push-ups appear to provide a superior abdominal muscle challenge. However, for individuals unable to tolerate high lumbar IVJ compressive loads, potential benefits gained by incorporating suspended push-ups into their resistance training regimen may be outweighed by the risk of overloading low-back tissues.

DETECTION OF A GROUND-WATER/SURFACE-WATER INTERFACE WITH DIRECT-PUSH EQUIPMENT

EPA Science Inventory

A ground-water/surface-water interface (GSI) was documented at the Thermo Chem CERCLA Site in Muskegon, MI via direct-push (DP) sampling. At that time, contaminated ground water flowed from the upland area of the site into the Black Creek floodplain. DP rods equipped with a 1.5...

Initial Thrust Measurements of Marshall's Ion-ioN Thruster

NASA Technical Reports Server (NTRS)

Schloeder, Natalie R.; Scogin, Tyler; Liu, Thomas M.; Walker, Mitchell L. R.; Polzin, Kurt A.; Dankanich, John W.; Aanesland, Ane

2015-01-01

Electronegative ion thrusters are a variation of tradition gridded ion thruster technology differentiated by the production and acceleration of both positive and negative ions. Benefits of electronegative ion thrusters include the elimination of lifetime-limiting cathodes from the thruster architecture and the ability to generate appreciable thrust from both charge species. Following the continued development of electronegative ion thruster technology as exhibited by the PEGASES (Plasma Propulsion with Electronegative GASES) thruster, direct thrust measurements are required to push interest in electronegative ion thruster technology forward. For this work, direct thrust measurements of the MINT (Marshall's Ion-ioN Thruster) will be taken on a hanging pendulum thrust stand for propellant mixtures of Sulfur Hexafluoride and Argon at volumetric flow rates of 5-25 sccm at radio frequency power levels of 100-600 watts at a radio frequency of 13.56 MHz. Acceleration grid operation is operated using a square waveform bias of +/-300 volts at a frequency of 25 kHz.

Foot placement strategy in pushing and pulling.

PubMed

Lee, Tzu-Hsien

2018-01-01

Pushing and pulling tasks are very common in daily and industrial workplaces. They are one major source of musculoskeletal complaints. This study aimed to examine the foot placement strategy while pushing and pulling. Thirteen young males and ten young females were recruited as participants. A two (pushing and pulling) by four (48 cm, 84 cm, 120 cm, and 156 cm) factorial design was used. Exertion direction and exertion height significantly affected foot placement strategy. Pushing task needed more anteroposterior space than pulling task. The percentages of female/male for trailing foot position ranged from 77% to 90% (pushing) and from 80% to 93% (pulling) across the exertion heights. Practitioners should provide an anteroposterior space approximately to 70% body stature for workers to exert their maximum pulling and pushing strengths.

Effects of asymmetrical stance and movement on body rotation in pushing.

PubMed

Lee, Yun-Ju; Aruin, Alexander S

2015-01-21

Pushing objects in the presence of body asymmetries could increase the risk of back injury. Furthermore, when the object is heavy, it could exacerbate the effects induced by asymmetrical posture. We investigated how the use of asymmetrical posture and/or upper extremity movement affect vertical torque (Tz) and center of pressure (COP) displacement during pushing. Ten healthy volunteers were instructed to push objects of three different weights using two hands (symmetrical hand use) or one hand (asymmetrical hand use) while standing in symmetrical or asymmetrical foot-positions. The peak values of Tz and COP displacement in the medial-lateral direction (COPML) were analyzed. In cases of isolated asymmetry, changes in the Tz were mainly linked with effects of hand-use whereas effects of foot-position dominated changes in the COPML displacement. In cases of a combined asymmetry, the magnitudes of both Tz and COPML were additive when asymmetrical hand-use and foot-position induced the rotation of the lower and upper body in the same direction or subtractive when asymmetries resulted in the rotation of the body segments in the opposite directions. Moreover, larger Tz and COP displacements were seen when pushing the heavy weight. The results point out the importance of using Tz and COPML to describe the isolated or combined effects of asymmetrical upper extremity movement and asymmetrical posture on body rotation during pushing. Furthermore, it suggests that a proper combination of unilateral arm movement and foot placements could help to reduce body rotation even when pushing heavy objects. Copyright © 2014 Elsevier Ltd. All rights reserved.

Effects of asymmetrical stance and movement on body rotation in pushing

PubMed Central

Lee, Yun-Ju; Aruin, Alexander S.

2014-01-01

Pushing objects in the presence of body asymmetries could increase the risk of back injury. Furthermore, when the object is heavy, it could exacerbate the effects induced by asymmetrical posture. We investigated how the use of asymmetrical posture and/or upper extremity movement affect vertical torque (Tz) and center of pressure (COP) displacement during pushing. Ten healthy volunteers were instructed to push objects of three different weights using two hands (symmetrical hand use) or one hand (asymmetrical hand use) while standing in symmetrical or asymmetrical foot-positions. The peak values of Tz and COP displacement in the medial-lateral direction (COPML) were analyzed. In cases of isolated asymmetry, changes in the Tz were mainly linked with effects of hand-use whereas effects of foot-position dominated changes in the COPML displacement. In cases of a combined asymmetry, the magnitudes of both Tz and COPML were additive when asymmetrical hand-use and foot-position induced the rotation of the lower and upper body in the same direction or subtractive when asymmetries resulted in the rotation of the body segments in the opposite directions. Moreover, larger Tz and COP displacements were seen when pushing the heavy weight. The results point out the importance of using Tz and COPML to describe the isolated or combined effects of asymmetrical upper extremity movement and asymmetrical posture on body rotation during pushing. Furthermore, it suggests that a proper combination of unilateral arm movement and foot placements could help to reduce body rotation even when pushing heavy objects. PMID:25498915

78 FR 24368 - Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Model Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-25

... chain and cable control system with a push-pull control system. Since we issued that AD, we have... requires replacing the existing chain and cable control system with a push-pull control system. Both... Model 205A-1 to replace the tail rotor chain and cable control system with a push-pull control system...

Technology Needs for Gamma Ray Astronomy

NASA Technical Reports Server (NTRS)

Gehrels, Neil

2011-01-01

Gamma ray astronomy is currently in an exciting period of multiple missions and a wealth of data. Results from INTEGRAL, Fermi, AGILE, Suzaku and Swift are making large contributions to our knowledge of high energy processes in the universe. The advances are due to new detector and imaging technologies. The steps to date have been from scintillators to solid state detectors for sensors and from light buckets to coded aperture masks and pair telescopes for imagers. A key direction for the future is toward focusing telescopes pushing into the hard X-ray regime and Compton telescopes and pair telescopes with fine spatial resolution for medium and high energy gamma rays. These technologies will provide finer imaging of gamma-ray sources. Importantly, they will also enable large steps forward in sensitivity by reducing background.

Advanced Liquid-Free, Piezoresistive, SOI-Based Pressure Sensors for Measurements in Harsh Environments.

PubMed

Ngo, Ha-Duong; Mukhopadhyay, Biswaijit; Ehrmann, Oswin; Lang, Klaus-Dieter

2015-08-18

In this paper we present and discuss two innovative liquid-free SOI sensors for pressure measurements in harsh environments. The sensors are capable of measuring pressures at high temperatures. In both concepts media separation is realized using a steel membrane. The two concepts represent two different strategies for packaging of devices for use in harsh environments and at high temperatures. The first one is a "one-sensor-one-packaging_technology" concept. The second one uses a standard flip-chip bonding technique. The first sensor is a "floating-concept", capable of measuring pressures at temperatures up to 400 °C (constant load) with an accuracy of 0.25% Full Scale Output (FSO). A push rod (mounted onto the steel membrane) transfers the applied pressure directly to the center-boss membrane of the SOI-chip, which is placed on a ceramic carrier. The chip membrane is realized by Deep Reactive Ion Etching (DRIE or Bosch Process). A novel propertied chip housing employing a sliding sensor chip that is fixed during packaging by mechanical preloading via the push rod is used, thereby avoiding chip movement, and ensuring optimal push rod load transmission. The second sensor can be used up to 350 °C. The SOI chips consists of a beam with an integrated centre-boss with was realized using KOH structuring and DRIE. The SOI chip is not "floating" but bonded by using flip-chip technology. The fabricated SOI sensor chip has a bridge resistance of 3250 Ω. The realized sensor chip has a sensitivity of 18 mV/µm measured using a bridge current of 1 mA.

A perspective of adaptation in healthcare.

PubMed

Mezghani, Emna; Da Silveira, Marcos; Pruski, Cédric; Exposito, Ernesto; Drira, Khalil

2014-01-01

Emerging new technologies in healthcare has proven great promises for managing patient care. In recent years, the evolution of Information and Communication Technologies pushes many research studies to think about treatment plan adaptation in this area. The main goal is to accelerate the decision making by dynamically generating new treatment due to unexpected situations. This paper portrays the treatment adaptation from a new perspective inspired from the human nervous system named autonomic computing. Thus, the selected potential studies are classified according to the maturity levels of this paradigm. To guarantee optimal and accurate treatment adaptation, challenges related to medical knowledge and data are identified and future directions to be explored in healthcare systems are discussed.

Voices from the "Working Lives" Project: The Push-Pull of Work and Care

ERIC Educational Resources Information Center

Fehring, Heather; Herring, Katherine

2012-01-01

A recent policy direction in many OECD countries has been to increase workforce participation for women of childbearing age; a policy direction which seemingly runs counter to a need for improved work-life balance for women themselves. This article explores the impact of this somewhat contradictory "push-pull" of policy by examining some…

Energy and economic trade offs for advanced technology subsonic aircraft

NASA Technical Reports Server (NTRS)

Maddalon, D. V.; Wagner, R. D.

1976-01-01

Changes in future aircraft technology which conserve energy are studied, along with the effect of these changes on economic performance. Among the new technologies considered are laminar-flow control, composite materials with and without laminar-flow control, and advanced airfoils. Aircraft design features studied include high-aspect-ratio wings, thickness ratio, and range. Engine technology is held constant at the JT9D level. It is concluded that wing aspect ratios of future aircraft are likely to significantly increase as a result of new technology and the push of higher fuel prices. Whereas current airplanes have been designed for AR = 7, supercritical technology and much higher fuel prices will drive aspect ratio to the AR = 9-10 range. Composite materials may raise aspect ratio to about 11-12 and practical laminar flow-control systems may further increase aspect ratio to 14 or more. Advanced technology provides significant reductions in aircraft take-off gross weight, energy consumption, and direct operating cost.

[Development of Biliary Contrast Agents Remote Pushing Device].

PubMed

Zhu, Haoyang; Dong, Dinghui; Luo, Yu; Ren, Fenggang; Zhang, Jing; Tan, Wenjun; Shi, Aihua; Hu, Liangshuo; Wu, Rongqian; Lyu, Yi

2018-01-30

A biliary contrast agents pushing device, including a syringe pushing system and a remote controller is introduced. The syringe pushing system comprises an injector card slot, a support platform and an injection bolus fader. A 20 mL syringe can be fitted on the syringe pushing system and kept with the ground about 30 degree. This system can perform air bubble pumping back and contrast agents bolus injection as well as speed adjustment. Remote controller is an infrared remote control which can start and stop the syringe pushing system. With this device, the remote controlled cholangiography technology can be achieved, which can not only protect doctors from X-ray radiation but also improve the traditional T-tube cholangiography and the contrast effect, reduce postoperative complications in patients as well. The application of this device will improve the current diagnosis and treatment system, the device will benefit the majority of doctors and patients.

Income, insurance, and technology: why does health spending outpace economic growth?

PubMed

Smith, Sheila; Newhouse, Joseph P; Freeland, Mark S

2009-01-01

A broad consensus holds that increased medical capability-technology-is the primary driver of health spending growth. However, technology does not expand independently of historical context; it is fueled by rising incomes and more generous insurance coverage. We estimate that medical technology explains 27-48 percent of health spending growth since 1960-a smaller percentage than earlier estimates. Income (gross domestic product, or GDP) growth plays a critical role, primarily through the actions of governments and employers on behalf of pools of consumers. The contribution of insurance is likely to differ, with less of a push from increasing generosity of coverage and more of a push from changes in provider payment.

When Push comes to Shove and Much More: Spring Internet World '97.

ERIC Educational Resources Information Center

Healy, Helen; Rolls, Linda

1997-01-01

Covers the five keynote addresses as well as three program presentations delivered at the Spring Internet World (1997) conference in Los Angeles. Highlights exhibited products (offline browsers and tools, push technology and foreign-language applications), online financial services and miscellaneous networks. (AEF)

AORN ergonomic tool 7: pushing, pulling, and moving equipment on wheels.

PubMed

Waters, Thomas; Lloyd, John D; Hernandez, Edward; Nelson, Audrey

2011-09-01

Pushing and pulling equipment in and around the OR can place high shear force demands on perioperative team members' shoulder and back muscles and joints. These high forces may lead to work-related musculoskeletal disorders. AORN Ergonomic Tool 7: Pushing, Pulling, and Moving Equipment on Wheels can help perioperative team members assess the risk of pushing and pulling tasks in the perioperative setting. The tool provides evidence-based suggestions about when assistive devices should be used for these tasks and is based on current ergonomic safety concepts, scientific evidence, and knowledge of effective technology and procedures, including equipment and devices for safe patient handling. Published by Elsevier Inc.

Low-Back Biomechanics and Static Stability During Isometric Pushing

PubMed Central

Granata, Kevin P.; Bennett, Bradford C.

2006-01-01

Pushing and pulling tasks are increasingly prevalent in industrial workplaces. Few studies have investigated low-back biomechanical risk factors associated with pushing, and we are aware of none that has quantified spinal stability during pushing exertions. Data recorded from 11 healthy participants performing isometric pushing exertions demonstrated that trunk posture, vector force direction of the applied load, and trunk moment were influenced (p < .01) by exertion level, elevation of the handle for the pushing task, and foot position. A biomechanical model was used to analyze the posture and hand force data gathered from the pushing exertions. Model results indicate that pushing exertions provide significantly (p < .01) less stability than lifting when antagonistic cocontraction is ignored. However, stability can be augmented by recruitment of muscle cocontraction. Results suggest that cocontraction may be recruited to compensate for the fact that equilibrium mechanics provide little intrinsic trunk stiffness and stability during pushing exertions. If one maintains stability by means of cocontraction, additional spinal load is thereby created, increasing the risk of overload injury. Thus it is important to consider muscle cocontraction when evaluating the biomechanics of pushing exertions. Potential applications of this research include improved assessment of biomechanical risk factors for the design of industrial pushing tasks. PMID:16435695

NASA/Goddard Thermal Technology Overview 2014

NASA Technical Reports Server (NTRS)

Butler, Daniel; Swanson, Theodore D.

2014-01-01

This presentation summarizes the current plans and efforts at NASA Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the Technology Development Program at NASA. While funding for basic technology development is still scarce, significant efforts are being made in direct support of flight programs. New technology development continues to be driven by the needs of future missions, and applications of these technologies to current Goddard programs will be addressed. Many of these technologies also have broad applicability to DOD, DOE, and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program, the Small Business Innovative Research (SBIR) program, and the NASA Engineering and Safety Center (NESC), are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of electro-hydrodynamically pumped systems, development of high electrical conductivity coatings, and various other research activities. New Technology program underway at NASA, although funding is limited center dot NASA/GSFC's primary mission of science satellite development is healthy and vibrant, although new missions are scarce - now have people on overhead working new missions and proposals center dot Future mission applications promise to be thermally challenging center dot Direct technology funding is still very restricted - Projects are the best source for direct application of technology - SBIR thermal subtopic resurrected in FY 14 - Limited Technology development underway via IRAD, NESC, other sources - Administrator pushing to revive technology and educational programs at NASA - new HQ directorate established

Human Outer Solar System Exploration via Q-Thruster Technology

NASA Technical Reports Server (NTRS)

Joosten, B. Kent; White, Harold G.

2014-01-01

Propulsion technology development efforts at the NASA Johnson Space Center continue to advance the understanding of the quantum vacuum plasma thruster (QThruster), a form of electric propulsion. Through the use of electric and magnetic fields, a Q-thruster pushes quantum particles (electrons/positrons) in one direction, while the Qthruster recoils to conserve momentum. This principle is similar to how a submarine uses its propeller to push water in one direction, while the submarine recoils to conserve momentum. Based on laboratory results, it appears that continuous specific thrust levels of 0.4 - 4.0 N/kWe are achievable with essentially no onboard propellant consumption. To evaluate the potential of this technology, a mission analysis tool was developed utilizing the Generalized Reduced Gradient non-linear parameter optimization engine contained in the Microsoft Excel® platform. This tool allowed very rapid assessments of "Q-Ship" minimum time transfers from earth to the outer planets and back utilizing parametric variations in thrust acceleration while enforcing constraints on planetary phase angles and minimum heliocentric distances. A conservative Q-Thruster specific thrust assumption (0.4 N/kWe) combined with "moderate" levels of space nuclear power (1 - 2 MWe) and vehicle specific mass (45 - 55 kg/kWe) results in continuous milli-g thrust acceleration, opening up realms of human spaceflight performance completely unattainable by any current systems or near-term proposed technologies. Minimum flight times to Mars are predicted to be as low as 75 days, but perhaps more importantly new "retro-phase" and "gravity-augmented" trajectory shaping techniques were revealed which overcome adverse planetary phasing and allow virtually unrestricted departure and return opportunities. Even more impressively, the Jovian and Saturnian systems would be opened up to human exploration with round-trip times of 21 and 32 months respectively including 6 to 12 months of exploration at the destinations. Finally, interstellar trip times are assessed at milli-g acceleration levels.

ENVIRONMENTAL TESTS COMPARING KRESS INDIRECT DRY COOLING WITH CONVENTIONAL COKE OVEN PUSHING AND QUENCHING

EPA Science Inventory

The paper describes the Kress Indirect Dry Cooling (KIDC) process and gives results of an evaluation through baseline and demonstration emission testing. he KIDC process offers a technology that has the potential to reduce emissions from coke pushing and quenching at existing cok...

Chemo-mechanical pushing of proteins along single-stranded DNA.

PubMed

Sokoloski, Joshua E; Kozlov, Alexander G; Galletto, Roberto; Lohman, Timothy M

2016-05-31

Single-stranded (ss)DNA binding (SSB) proteins bind with high affinity to ssDNA generated during DNA replication, recombination, and repair; however, these SSBs must eventually be displaced from or reorganized along the ssDNA. One potential mechanism for reorganization is for an ssDNA translocase (ATP-dependent motor) to push the SSB along ssDNA. Here we use single molecule total internal reflection fluorescence microscopy to detect such pushing events. When Cy5-labeled Escherichia coli (Ec) SSB is bound to surface-immobilized 3'-Cy3-labeled ssDNA, a fluctuating FRET signal is observed, consistent with random diffusion of SSB along the ssDNA. Addition of Saccharomyces cerevisiae Pif1, a 5' to 3' ssDNA translocase, results in the appearance of isolated, irregularly spaced saw-tooth FRET spikes only in the presence of ATP. These FRET spikes result from translocase-induced directional (5' to 3') pushing of the SSB toward the 3' ssDNA end, followed by displacement of the SSB from the DNA end. Similar ATP-dependent pushing events, but in the opposite (3' to 5') direction, are observed with EcRep and EcUvrD (both 3' to 5' ssDNA translocases). Simulations indicate that these events reflect active pushing by the translocase. The ability of translocases to chemo-mechanically push heterologous SSB proteins along ssDNA provides a potential mechanism for reorganization and clearance of tightly bound SSBs from ssDNA.

Advances in point-of-care technologies for molecular diagnostics.

PubMed

Zarei, Mohammad

2017-12-15

Advances in miniaturization, nanotechnology, and microfluidics, along with developments in cloud-connected point-of-care (POC) diagnostics technologies are pushing the frontiers of POC devices toward low-cost, user-friendly, and enhanced sensitivity molecular-level diagnostics. The combination of various bio-sensing platforms within smartphone-integrated electronic readers provides accurate on-site and on-time diagnostics based on various types of chemical and biological targets. Further, 3D printing technology shows a huge potential toward fabrication and improving the performance of POC devices. Integration of skin-like flexible sensors with wireless communication technology creates a unique opportunity for continuous, real-time monitoring of patients for both preventative healthcare and during disease outbreaks. Here, we review recent developments and advances in POC technologies and describe how these advances enhance the performance of POC platforms. Also, this review describes challenges, directions, and future trends on application of emerging technologies in POC diagnostics. Copyright © 2017 Elsevier B.V. All rights reserved.

Along-track calibration of SWIR push-broom hyperspectral imaging system

NASA Astrophysics Data System (ADS)

Jemec, Jurij; Pernuš, Franjo; Likar, Boštjan; Bürmen, Miran

2016-05-01

Push-broom hyperspectral imaging systems are increasingly used for various medical, agricultural and military purposes. The acquired images contain spectral information in every pixel of the imaged scene collecting additional information about the imaged scene compared to the classical RGB color imaging. Due to the misalignment and imperfections in the optical components comprising the push-broom hyperspectral imaging system, variable spectral and spatial misalignments and blur are present in the acquired images. To capture these distortions, a spatially and spectrally variant response function must be identified at each spatial and spectral position. In this study, we propose a procedure to characterize the variant response function of Short-Wavelength Infrared (SWIR) push-broom hyperspectral imaging systems in the across-track and along-track direction and remove its effect from the acquired images. A custom laser-machined spatial calibration targets are used for the characterization. The spatial and spectral variability of the response function in the across-track and along-track direction is modeled by a parametrized basis function. Finally, the characterization results are used to restore the distorted hyperspectral images in the across-track and along-track direction by a Richardson-Lucy deconvolution-based algorithm. The proposed calibration method in the across-track and along-track direction is thoroughly evaluated on images of targets with well-defined geometric properties. The results suggest that the proposed procedure is well suited for fast and accurate spatial calibration of push-broom hyperspectral imaging systems.

Dynamic push-pull characteristics at three hand-reach envelopes: applications for the workplace.

PubMed

Calé-Benzoor, Maya; Dickstein, Ruth; Arnon, Michal; Ayalon, Moshe

2016-01-01

Pushing and pulling are common tasks in the workplace. Overexertion injuries related to manual pushing and pulling are often observed, and therefore the understanding of work capacity is important for efficient and safe workstation design. The purpose of the present study was to describe workloads obtained during different reach envelopes during a seated push-pull task. Forty-five women performed an isokinetic push-pull sequence at two velocities. Strength, work and agonist/antagonist muscle ratio were calculated for the full range of motion (ROM). We then divided the ROM into three reach envelopes - neutral, medium, and maximum reach. The work capacity for each direction was determined and the reach envelope work data were compared. Push capability was best at medium reach envelope and pulling was best at maximum reach envelope. Push/pull strength ratio was approximately 1. A recommendation was made to avoid strenuous push-pull tasks at neutral reach envelopes. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

NASA Goddard Thermal Technology Overview 2018

NASA Technical Reports Server (NTRS)

Butler, Dan; Swanson, Ted

2018-01-01

This presentation summarizes the current plans and efforts at NASA/Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently submitted NASA budget will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology Implementation on current flight programs will be reviewed, and the recent push for Cube-sat mission development will also be addressed. Many of these technologies also have broad applicability to DOD, DOE, and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of thermal control coatings, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

Metabolic cost of level-ground walking with a robotic transtibial prosthesis combining push-off power and nonlinear damping behaviors: preliminary results.

PubMed

Yanggang Feng; Jinying Zhu; Qining Wang

2016-08-01

Recent advances in robotic technology are facilitating the development of robotic prostheses. Our previous studies proposed a lightweight robotic transtibial prosthesis with a damping control strategy. To improve the performance of power assistance, in this paper, we redesign the prosthesis and improve the control strategy by supplying extra push-off power. A male transtibial amputee subject volunteered to participate in the study. Preliminary experimental results show that the proposed prosthesis with push-off control improves energy expenditure by a percentage ranged from 9.72 % to 14.99 % for level-ground walking compared with the one using non-push-off control.

The development of intelligent healthcare in China.

PubMed

Zheng, Xiaochen; Rodríguez-Monroy, Carlos

2015-05-01

Intelligent healthcare (IH) is proposed with the fast application of Internet of Things technology in the healthcare area in recent years. It is considered as an expansion of e-health and telemedicine. As the largest developing country, China is investing large amounts of resources to push forward the development of IH. It is one of the centerpieces of the country's New Healthcare Reform, and great expectation is placed on it to help solve the conflict between limited healthcare resources and the large patient population. Essential policies, milestones, standards, and specifications from the Chinese government since the 1990s were reviewed to show the brief development history of IH in China. Some typical cases and products have been analyzed to present the current situation. The main problems and future development directions have been summarized. The IH industry in China has great potential and is growing very fast, but a lot of challenges also exist. In the future both government support and the active participation of nongovernmental capital are needed to push forward the whole industry.

The Wireless War Dance.

ERIC Educational Resources Information Center

Moriarty, Laura Joyce

2001-01-01

Discusses the use of wireless technology on college campuses. Explores why colleges may want to use the technology, when they should begin to take it seriously, the culture pushing the change, and how schools should approach wireless technology. (EV)

NASA Brief: Q-Thruster Physics

NASA Technical Reports Server (NTRS)

White, Harold

2013-01-01

Q-thrusters are a low-TRL form of electric propulsion that operates on the principle of pushing off of the quantum vacuum. A terrestrial analog to this is to consider how a submarine uses its propeller to push a column of water in one direction, while the sub recoils in the other to conserve momentum -the submarine does not carry a "tank" of sea water to be used as propellant. In our case, we use the tools of Magnetohydrodynamics (MHD) to show how the thruster pushes off of the quantum vacuum which can be thought of as a sea of virtual particles -principally electrons and positrons that pop into and out of existence, and where fields are stronger, there are more virtual particles. The idea of pushing off the quantum vacuum has been in the technical literature for a few decades, but to date, the obstacle has been the magnitude of the predicted thrust which has been derived analytically to be very small, and therefore not likely to be useful for human spaceflight. Our recent theoretical model development and test data suggests that we can greatly increase the magnitude of the negative pressure of the quantum vacuum and generate a specific force such that technology based on this approach can be competitive for in-space propulsion approx. 0.1N/kW), and possibly for terrestrial applications (approx. 10N/kW). As an additional validation of the approach, the theory allows calculation of physics constants from first principles: Gravitational constant, Planck constant, Bohr radius, dark energy fraction, electron mass.

A Place for Art and Design Education in the STEM Conversation

ERIC Educational Resources Information Center

Bequette, James W.; Bequette, Marjorie Bullitt

2012-01-01

The recent push for STEM (Science, Technology, Engineering, and Mathematics) education introduces (through the emphasis on engineering) a "design process" to science classrooms; some educators have also pushed for the "artistic or creative process" becoming a part of STEM education. In certain cases, this might be an opportunity for greater…

Technology in the Montessori Classroom: Teachers' Beliefs and Technology Use

ERIC Educational Resources Information Center

Jones, Sara J.

2017-01-01

As technology becomes ubiquitous in society, there is increasing momentum to incorporate it into education. Montessori education is not immune to this push for technology integration. This qualitative study investigates four Upper Elementary Montessori teachers' attitudes toward technology and technology integration in a public school setting.…

Chemo-mechanical pushing of proteins along single-stranded DNA

PubMed Central

Sokoloski, Joshua E.; Kozlov, Alexander G.; Galletto, Roberto; Lohman, Timothy M.

2016-01-01

Single-stranded (ss)DNA binding (SSB) proteins bind with high affinity to ssDNA generated during DNA replication, recombination, and repair; however, these SSBs must eventually be displaced from or reorganized along the ssDNA. One potential mechanism for reorganization is for an ssDNA translocase (ATP-dependent motor) to push the SSB along ssDNA. Here we use single molecule total internal reflection fluorescence microscopy to detect such pushing events. When Cy5-labeled Escherichia coli (Ec) SSB is bound to surface-immobilized 3′-Cy3–labeled ssDNA, a fluctuating FRET signal is observed, consistent with random diffusion of SSB along the ssDNA. Addition of Saccharomyces cerevisiae Pif1, a 5′ to 3′ ssDNA translocase, results in the appearance of isolated, irregularly spaced saw-tooth FRET spikes only in the presence of ATP. These FRET spikes result from translocase-induced directional (5′ to 3′) pushing of the SSB toward the 3′ ssDNA end, followed by displacement of the SSB from the DNA end. Similar ATP-dependent pushing events, but in the opposite (3′ to 5′) direction, are observed with EcRep and EcUvrD (both 3′ to 5′ ssDNA translocases). Simulations indicate that these events reflect active pushing by the translocase. The ability of translocases to chemo-mechanically push heterologous SSB proteins along ssDNA provides a potential mechanism for reorganization and clearance of tightly bound SSBs from ssDNA. PMID:27185951

Combat Fitness a Concept Vital to National Defense

DTIC Science & Technology

2010-06-18

Physical fitness testing has traditionally been focused on a 1.5- to 3-mile run, push-ups, sit-ups, and, in some Services pull -ups, flexibility, and...Performance 6 Shoot Physical Requirements Employ hand grenades Run under load, jump, bound, high/low crawl, climb, push, pull , squat, lunge, roll...jump, bound, high/low crawl, climb, push, pull , squat, lunge, roll, stop, start, change direction and get up/down. Navigate from one point to

The start in speed skating: from running to gliding.

PubMed

de Koning, J J; Thomas, R; Berger, M; de Groot, G; van Ingen Schenau, G J

1995-12-01

The purpose of this study was to describe the push-off kinematics in speed skating using three-dimensional coordinates of elite male sprinters during the first part of a speed skating sprint. The velocity of the mass center of the skater's body VC, is decomposed into an "extension" velocity component VE, which is associated with the shortening and lengthening of the leg segment and a "rotational" velocity component Vr, which is the result of the rotation of the leg segment about the toe of the skate. It can be concluded that the mechanics of the first strokes of a sprint differ considerably from the mechanics of strokes later on. The first push-offs take place against fixed location on the ice. In these "running-like" push-offs the contribution of Vr in the forward direction is larger than the extension component Ve. Later on, the strokes are characterized by a gliding push-off in which Ve increases. In these gliding push-offs no direct relation exists between forward velocity of the skater and the extension in the joints. This allows skaters to obtain much higher velocities than can be obtained during running.

Additive manufacturing of biologically-inspired materials.

PubMed

Studart, André R

2016-01-21

Additive manufacturing (AM) technologies offer an attractive pathway towards the fabrication of functional materials featuring complex heterogeneous architectures inspired by biological systems. In this paper, recent research on the use of AM approaches to program the local chemical composition, structure and properties of biologically-inspired materials is reviewed. A variety of structural motifs found in biological composites have been successfully emulated in synthetic systems using inkjet-based, direct-writing, stereolithography and slip casting technologies. The replication in synthetic systems of design principles underlying such structural motifs has enabled the fabrication of lightweight cellular materials, strong and tough composites, soft robots and autonomously shaping structures with unprecedented properties and functionalities. Pushing the current limits of AM technologies in future research should bring us closer to the manufacturing capabilities of living organisms, opening the way for the digital fabrication of advanced materials with superior performance, lower environmental impact and new functionalities.

Centrosome centering and decentering by microtubule network rearrangement

PubMed Central

Letort, Gaëlle; Nedelec, Francois; Blanchoin, Laurent; Théry, Manuel

2016-01-01

The centrosome is positioned at the cell center by pushing and pulling forces transmitted by microtubules (MTs). Centrosome decentering is often considered to result from asymmetric, cortical pulling forces exerted in particular by molecular motors on MTs and controlled by external cues affecting the cell cortex locally. Here we used numerical simulations to investigate the possibility that it could equally result from the redistribution of pushing forces due to a reorientation of MTs. We first showed that MT gliding along cell edges and pivoting around the centrosome regulate MT rearrangement and thereby direct the spatial distribution of pushing forces, whereas the number, dynamics, and stiffness of MTs determine the magnitude of these forces. By modulating these parameters, we identified different regimes, involving both pushing and pulling forces, characterized by robust centrosome centering, robust off-centering, or “reactive” positioning. In the last-named conditions, weak asymmetric cues can induce a misbalance of pushing and pulling forces, resulting in an abrupt transition from a centered to an off-centered position. Taken together, these results point to the central role played by the configuration of the MTs on the distribution of pushing forces that position the centrosome. We suggest that asymmetric external cues should not be seen as direct driver of centrosome decentering and cell polarization but instead as inducers of an effective reorganization of the MT network, fostering centrosome motion to the cell periphery. PMID:27440925

Using pre-screening methods for an effective and reliable site characterization at megasites.

PubMed

Algreen, Mette; Kalisz, Mariusz; Stalder, Marcel; Martac, Eugeniu; Krupanek, Janusz; Trapp, Stefan; Bartke, Stephan

2015-10-01

This paper illustrates the usefulness of pre-screening methods for an effective characterization of polluted sites. We applied a sequence of site characterization methods to a former Soviet military airbase with likely fuel and benzene, toluene, ethylbenzene, and xylene (BTEX) contamination in shallow groundwater and subsoil. The methods were (i) phytoscreening with tree cores; (ii) soil gas measurements for CH4, O2, and photoionization detector (PID); (iii) direct-push with membrane interface probe (MIP) and laser-induced fluorescence (LIF) sensors; (iv) direct-push sampling; and (v) sampling from soil and from groundwater monitoring wells. Phytoscreening and soil gas measurements are rapid and inexpensive pre-screening methods. Both indicated subsurface pollution and hot spots successfully. The direct-push sensors yielded 3D information about the extension and the volume of the subsurface plume. This study also expanded the applicability of tree coring to BTEX compounds and tested the use of high-resolution direct-push sensors for light hydrocarbons. Comparison of screening results to results from conventional soil and groundwater sampling yielded in most cases high rank correlation and confirmed the findings. The large-scale application of non- or low-invasive pre-screening can be of help in directing and focusing the subsequent, more expensive investigation methods. The rapid pre-screening methods also yielded useful information about potential remediation methods. Overall, we see several benefits of a stepwise screening and site characterization scheme, which we propose in conclusion.

Technology Transfer: A Contact Sport

NASA Technical Reports Server (NTRS)

Paynter, Nina P.

1995-01-01

Technology transfer is a dynamic process, involving dynamic people as the bridge between NASA Langley Research Center and the outside world. This bridge, for nonaerospace applications, is known as the Technology Applications Group. The introduction of new innovations and expertise where they are needed occurs through a 'push' and 'pull' process. A 'push' occurs when a new technology is first developed with high commercial potential and then a company is found to licence or further develop the technology. The 'pull' process occurs through problem statements. A company or group will submit a written statement of what they need and the shortcomings of commercially available technology. The Technology Transfer Team (T3) reviews these problem statements and decides where NASA LaRC can offer assistance. A researcher or group of researchers are then identified who can help solve the problem and they are put in contact with the company. Depending upon the situation in either method, a Space Act Agreement (SAA), or outline of the responsibilities for each party, is developed.

Technology push, market pull, and the Valley of Death

NASA Astrophysics Data System (ADS)

Swift, Gregory W.

2005-09-01

The Valley of Death is the gap between fundamental research and product development, where apparently promising technologies can stall or disappear. Fundamental researchers may hope for potential applications of their work, and they try to push technology based on their research. Businesses may hope that new technology might serve their market needs, and they try to find promising new technologies that can be pulled toward practical use. The valley between the researchers and the businesses can be surprisingly twisted and thorny, despite government attempts to build roads across it. The histories of cryogenic engineering in the late 20th century and of thermoacoustics work at Los Alamos offer examples of both useful and misguided strategies in this valley. Although global thermoacoustics R&D has not (yet?) been as successful as cryogenic engineering, thermoacoustics has thus far avoided some of the worst pitfalls in the valley.

Three components of postural control associated with pushing in symmetrical and asymmetrical stance.

PubMed

Lee, Yun-Ju; Aruin, Alexander S

2013-07-01

A number of occupational and leisure activities that involve pushing are performed in symmetrical or asymmetrical stance. The goal of this study was to investigate early postural adjustments (EPAs), anticipatory postural adjustments (APAs), and compensatory postural adjustments (CPAs) during pushing performed while standing. Ten healthy volunteers stood in symmetrical stance (with feet parallel) or in asymmetrical stance (staggered stance with one foot forward) and were instructed to use both hands to push forward the handle of a pendulum attached to the ceiling. Bilateral EMG activity of the trunk and leg muscles and the center of pressure (COP) displacements in the anterior-posterior (AP) and medial-lateral (ML) directions were recorded and analyzed during the EPAs, APAs, and CPAs. The EMG activity and the COP displacement were different between the symmetrical and asymmetrical stance conditions. The COP displacements in the ML direction were significantly larger in staggered stance than in symmetrical stance. In staggered stance, the EPAs and APAs in the thigh muscles of the backward leg were significantly larger, and the CPAs were smaller than in the forward leg. There was no difference in the EMG activity of the trunk muscles between the stance conditions. The study outcome confirmed the existence of the three components of postural control (EPAs, APAs, and CPAs) in pushing. Moreover, standing asymmetrically was associated with asymmetrical patterns of EMG activity in the lower extremities reflecting the stance-related postural control during pushing. The study outcome provides a basis for studying postural control during other daily activities involving pushing.

Teachers Must Push Technology's Tidal Wave: District Technology Initiatives Must Put the Teacher in Charge.

ERIC Educational Resources Information Center

Guhlin, Miguel

2002-01-01

For technology to impact student achievement, teachers must be empowered via extensive staff development. This paper presents building-level technology initiatives (e.g., peer training, super substitutes, and computer clubs) and district- level initiatives (e.g., establish a district technology committee, allow teachers to take computers home over…

Talking Stories on CD-ROM--How Do They Benefit Their Users?

ERIC Educational Resources Information Center

Donnelly, Michelle

2005-01-01

In recent years, the DfES, 2003 has pushed schools to try and integrate more interactive teaching methods into everyday teaching and learning. This push in technology has lead to an increased call for the use of interactive software to support reading. This study looks at whether talking stories benefit the children who use them. It is a…

PNNL pushing scientific discovery through data intensive computing breakthroughs

ScienceCinema

Deborah Gracio; David Koppenaal; Ruby Leung

2018-05-18

The Pacific Northwest National Laboratory's approach to data intensive computing (DIC) is focused on three key research areas: hybrid hardware architectures, software architectures, and analytic algorithms. Advancements in these areas will help to address, and solve, DIC issues associated with capturing, managing, analyzing and understanding, in near real time, data at volumes and rates that push the frontiers of current technologies.

Geophysical characterization of the Lollie Levee near Conway, Arkansas, using capacitively coupled resistivity, coring, and direct push logging

USGS Publications Warehouse

Gillip, Jonathan A.; Payne, Jason

2011-01-01

A geophysical characterization of Lollie Levee near Conway, Arkansas, was conducted in February 2011. A capacitively coupled resistivity survey (using Geometric's OhmMapper) was completed along the top and toe of the 6.7-mile levee. Two-dimensional inversions were conducted on the geophysical data. As a quality-control measure, cores and direct push logs were taken at approximately 1-mile intervals along the levee. The capacitively coupled resistivity survey, the coring, and the direct push logs were used to characterize the geologic materials. Comparison of the cores and the direct push log data, along with published resistivity values, indicates that resistivity values of 200 Ohm-meters or greater represent relatively clean sand, with decreasing resistivity values occurring with increasing silt and clay content. The cores indicated that the levee is composed of a heterogeneous mixture of sand, silt, and clay. The capacitively coupled resistivity sections confirm that the levee is composed of a heterogeneous mixture of high and low resistivity materials and show that the composition of the levee varies spatially. The geologic materials underlying the levee vary spatially as a result of the geologic processes that deposited them. In general, the naturally deposited geologic materials underlying the levee contain a greater amount of low resistivity materials in the southern extent of the levee.

Brace technology thematic series - The Sforzesco and Sibilla braces, and the SPoRT (Symmetric, Patient oriented, Rigid, Three-dimensional, active) concept

PubMed Central

2011-01-01

Background Bracing is an effective strategy for scoliosis treatment, but there is no consensus on the best type of brace, nor on the way in which it should act on the spine to achieve good correction. The aim of this paper is to present the family of SPoRT (Symmetric, Patient-oriented, Rigid, Three-dimensional, active) braces: Sforzesco (the first introduced), Sibilla and Lapadula. Methods The Sforzesco brace was developed following specific principles of correction. Due to its overall symmetry, the brace provides space over pathological depressions and pushes over elevations. Correction is reached through construction of the envelope, pushes, escapes, stops, and drivers. The real novelty is the drivers, introduced for the first time with the Sforzesco brace; they allow to achieve the main action of the brace: a three-dimensional elongation pushing the spine in a down-up direction. Brace prescription is made plane by plane: frontal (on the "slopes", another novelty of this concept, i.e. the laterally flexed sections of the spine), horizontal, and sagittal. The brace is built modelling the trunk shape obtained either by a plaster cast mould or by CAD-CAM construction. Brace checking is essential, since SPoRT braces are adjustable and customisable according to each individual curve pattern. Treatment time and duration is individually tailored (18-23 hours per day until Risser 3, then gradual reduction). SEAS (Scientific Exercises Approach to Scoliosis) exercises are a key factor to achieve success. Results The Sforzesco brace has shown to be more effective than the Lyon brace (matched case/control), equally effective as the Risser plaster cast (prospective cohort with retrospective controls), more effective than the Risser cast + Lyon brace in treating curves over 45 degrees Cobb (prospective cohort), and is able to improve aesthetic appearance (prospective cohort). Conclusions The SPoRT concept of bracing (three-dimensional elongation pushing in a down-up direction) is different from the other corrective systems: 3-point, traction, postural, and movement-based. The Sforzesco brace, being comparable to casting, may be the best brace for the worst cases. PMID:21554719

Enhanced Basicity of Push-Pull Nitrogen Bases in the Gas Phase.

PubMed

Raczyńska, Ewa D; Gal, Jean-François; Maria, Pierre-Charles

2016-11-23

Nitrogen bases containing one or more pushing amino-group(s) directly linked to a pulling cyano, imino, or phosphoimino group, as well as those in which the pushing and pulling moieties are separated by a conjugated spacer (C═X) n , where X is CH or N, display an exceptionally strong basicity. The n-π conjugation between the pushing and pulling groups in such systems lowers the basicity of the pushing amino-group(s) and increases the basicity of the pulling cyano, imino, or phosphoimino group. In the gas phase, most of the so-called push-pull nitrogen bases exhibit a very high basicity. This paper presents an analysis of the exceptional gas-phase basicity, mostly in terms of experimental data, in relation with structure and conjugation of various subfamilies of push-pull nitrogen bases: nitriles, azoles, azines, amidines, guanidines, vinamidines, biguanides, and phosphazenes. The strong basicity of biomolecules containing a push-pull nitrogen substructure, such as bioamines, amino acids, and peptides containing push-pull side chains, nucleobases, and their nucleosides and nucleotides, is also analyzed. Progress and perspectives of experimental determinations of GBs and PAs of highly basic compounds, termed as "superbases", are presented and benchmarked on the basis of theoretical calculations on existing or hypothetical molecules.

New Information Technologies: Possible Implications for Libraries.

ERIC Educational Resources Information Center

de Stricker, Ulla

1998-01-01

Presents observations about developments in information technology that will influence the information industry and libraries of the future. Discusses search engine capabilities; push technology; electronic commerce; WebTV; and optical discs with links to Web sites. Ten figures provide illustrations and charts. (AEF)

LDRD Highlights at the National Laboratories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alayat, R. A.

2016-10-10

To meet the nation’s critical challenges, the Department of Energy (DOE) national laboratories have always pushed the boundaries of science, technology, and engineering. The Atomic Energy Act of 1954 provided the basis for these laboratories to engage in the cutting edge of science and technology and respond to technological surprises, while retaining the best scientific and technological minds. To help re-energize this commitment, in 1991 the U.S. Congress authorized the national laboratories to devote a relatively small percentage of their budget to creative and innovative work that serves to maintain their vitality in disciplines relevant to DOE missions. Since then,more » this effort has been formally called the Laboratory Directed Research and Development (LDRD) Program. LDRD has been an essential mechanism to enable the laboratories to address DOE’s current and future missions with leading-edge research proposed independently by laboratory technical staff, evaluated through expert peer-review committees, and funded by the individual laboratories consistent with the authorizing legislation and the DOE LDRD Order 413.2C.« less

Push and pull strategies: applications for health care marketing.

PubMed

Kingsley, B R

1987-08-01

As health care markets mature and expand, strategies available in other industries become useful. This article examines how traditional push-pull strategies apply to health care. Marketers using a push strategy recognize that the sale of their services or goods is dependent upon the endorsement of a middleman and promote their product through the middleman. Those using a pull strategy market directly to the consumer. In this article, the author outlines the advantages and disadvantages of using each strategy.

Direct Detection Electron Energy-Loss Spectroscopy: A Method to Push the Limits of Resolution and Sensitivity.

PubMed

Hart, James L; Lang, Andrew C; Leff, Asher C; Longo, Paolo; Trevor, Colin; Twesten, Ray D; Taheri, Mitra L

2017-08-15

In many cases, electron counting with direct detection sensors offers improved resolution, lower noise, and higher pixel density compared to conventional, indirect detection sensors for electron microscopy applications. Direct detection technology has previously been utilized, with great success, for imaging and diffraction, but potential advantages for spectroscopy remain unexplored. Here we compare the performance of a direct detection sensor operated in counting mode and an indirect detection sensor (scintillator/fiber-optic/CCD) for electron energy-loss spectroscopy. Clear improvements in measured detective quantum efficiency and combined energy resolution/energy field-of-view are offered by counting mode direct detection, showing promise for efficient spectrum imaging, low-dose mapping of beam-sensitive specimens, trace element analysis, and time-resolved spectroscopy. Despite the limited counting rate imposed by the readout electronics, we show that both core-loss and low-loss spectral acquisition are practical. These developments will benefit biologists, chemists, physicists, and materials scientists alike.

NASA Goddard Thermal Technology Overview 2017

NASA Technical Reports Server (NTRS)

Butler, Dan; Swanson, Ted

2017-01-01

This presentation summarizes the current plans and efforts at NASA Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently enacted FY 17 NASA budget, which includes a sizeable increase, will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology Implementation on current flight programs will be reviewed, and the recent push for CubeSat mission development will also be addressed. Many of these technologies also have broad applicability to DOD (Dept. of Defense), DOE (Dept. of the Environment), and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of electro-hydrodynamically pumped systems, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

NASA Goddard Thermal Technology Overview 2016

NASA Technical Reports Server (NTRS)

Butler, Dan; Swanson, Ted

2016-01-01

This presentation summarizes the current plans and efforts at NASA Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently enacted FY 16 NASA budget, which includes a sizeable increase, will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology implementation on current flight programs will be reviewed, and the recent push for Cube-sat mission development will also be addressed. Many of these technologies also have broad applicability to DOD, DOE, and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of electro-hydrodynamically pumped systems, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

Achieving food security for one million sub-Saharan African poor through push-pull innovation by 2020.

PubMed

Khan, Zeyaur R; Midega, Charles A O; Pittchar, Jimmy O; Murage, Alice W; Birkett, Michael A; Bruce, Toby J A; Pickett, John A

2014-04-05

Food insecurity is a chronic problem in Africa and is likely to worsen with climate change and population growth. It is largely due to poor yields of the cereal crops caused by factors including stemborer pests, striga weeds and degraded soils. A platform technology, 'push-pull', based on locally available companion plants, effectively addresses these constraints resulting in substantial grain yield increases. It involves intercropping cereal crops with a forage legume, desmodium, and planting Napier grass as a border crop. Desmodium repels stemborer moths (push), and attracts their natural enemies, while Napier grass attracts them (pull). Desmodium is very effective in suppressing striga weed while improving soil fertility through nitrogen fixation and improved organic matter content. Both companion plants provide high-value animal fodder, facilitating milk production and diversifying farmers' income sources. To extend these benefits to drier areas and ensure long-term sustainability of the technology in view of climate change, drought-tolerant trap and intercrop plants are being identified. Studies show that the locally commercial brachiaria cv mulato (trap crop) and greenleaf desmodium (intercrop) can tolerate long droughts. New on-farm field trials show that using these two companion crops in adapted push-pull technology provides effective control of stemborers and striga weeds, resulting in significant grain yield increases. Effective multi-level partnerships have been established with national agricultural research and extension systems, non-governmental organizations and other stakeholders to enhance dissemination of the technology with a goal of reaching one million farm households in the region by 2020. These will be supported by an efficient desmodium seed production and distribution system in eastern Africa, relevant policies and stakeholder training and capacity development.

NSF Anticipates Pushing Boundaries on Open-Access Plan

ERIC Educational Resources Information Center

Basken, Paul

2013-01-01

The National Science Foundation (NSF), in carrying out the Obama administration's new push for greater public access to research published in scientific journals, will consider exclusivity periods shorter than the 12-month standard in the White House directive, as well as trade-offs involving data-sharing and considerations of publishers'…

Octopus movement: push right, go left.

PubMed

Hooper, Scott L

2015-05-04

Octopus arms have essentially infinite degrees of freedom. New research shows that, despite this potentially great complexity, to locomote octopuses simply elongate one or more arms, thus pushing the body in the opposite direction, and do so without activating the arms in an ordered pattern. Copyright © 2015 Elsevier Ltd. All rights reserved.

Visual probes and methods for placing visual probes into subsurface areas

DOEpatents

Clark, Don T.; Erickson, Eugene E.; Casper, William L.; Everett, David M.

2004-11-23

Visual probes and methods for placing visual probes into subsurface areas in either contaminated or non-contaminated sites are described. In one implementation, the method includes driving at least a portion of a visual probe into the ground using direct push, sonic drilling, or a combination of direct push and sonic drilling. Such is accomplished without providing an open pathway for contaminants or fugitive gases to reach the surface. According to one implementation, the invention includes an entry segment configured for insertion into the ground or through difficult materials (e.g., concrete, steel, asphalt, metals, or items associated with waste), at least one extension segment configured to selectively couple with the entry segment, at least one push rod, and a pressure cap. Additional implementations are contemplated.

A Mobile Nanoscience and Electron Microscopy Outreach Program

NASA Astrophysics Data System (ADS)

Coffey, Tonya; Kelley, Kyle

2013-03-01

We have established a mobile nanoscience laboratory outreach program in Western NC that puts scanning electron microscopy (SEM) directly in the hands of K-12 students and the general public. There has been a recent push to develop new active learning materials to educate students at all levels about nanoscience and nanotechnology. Previous projects, such as Bugscope, nanoManipulator, or SPM Live! allowed remote access to advanced microscopies. However, placing SEM directly in schools has not often been possible because the cost and steep learning curve of these technologies were prohibitive, making this project quite novel. We have developed new learning modules for a microscopy outreach experience with a tabletop SEM (Hitachi TM3000). We present here an overview of our outreach and results of the assessment of our program to date.

Metropolitan area networks: a corner stone in the broadband era

NASA Astrophysics Data System (ADS)

Ghanem, Adel

1991-02-01

Deployment of Broadband ISDN is being influenced by both a market pull and a technology push. New broadband service opportunities exist in the business and residential sectors of the market place. It is envisioned that some customers will need connections directly to broadband switches because of the high bandwidth needed for their applications. At the same time Metropolitan Area Network (MAN) systems will serve those customers with bandwidth requirements less than or equal to 150 Mbps. A given MAN will have a geographical domain to serve where it will carry out the switching tasks within this domain. While MANs couldbe designed using differentarchitecturalconcepts the setofservices expected tobeprovidedby MANs could be equivalent to thelist ofservices thatwillbe supported by the targetbroadband network. This paperpositions MANs as a major building block for Broadband networks. It also examines the evolution process ofMANs as a needed step to assure the successful deployment of these new broadband services. 2. BISDN - OVERVIEW Broadband ISDN (BISDN) is being driven into existence by both a market pull as well as a technology push. Opportunities for new valueadded services are the prime market pull for future broadband networks. These services opportunities extend beyond simple voice and low speed data applications and cover both the residential and the business sectors of the market. It is noted for instance that business customers have growing needs for sophisticated telecommunication vehicles to support their

Increased Technology Provision and Learning: Giving More for Nothing?

ERIC Educational Resources Information Center

Quillerou, Emmanuelle

2011-01-01

The development of new communication technologies has led to a push for greater technology use for teaching and learning. This is most true for distance learning education, which relies heavily on new technologies. Distance learning students, however, seem to have very limited time available for studying and learning because of work and/or family…

Trunk response and stability in standing under sagittal-symmetric pull-push forces at different orientations, elevations and magnitudes.

PubMed

El Ouaaid, Z; Shirazi-Adl, A; Plamondon, A

2018-03-21

To reduce lifting and associated low back injuries, manual material handling operations often involve pulling-pushing of carts at different weights, orientations, and heights. The loads on spine and risk of injury however need to be investigated. The aim of this study was to evaluate muscle forces, spinal loads and trunk stability in pull-push tasks in sagittal-symmetric, static upright standing posture. Three hand-held load magnitudes (80, 120 and 160 N) at four elevations (0, 20, 40 and 60 cm to the L5-S1) and 24 force directions covering all pull/push orientations were considered. For this purpose, a musculoskeletal finite element model with kinematics measured earlier were used. Results demonstrated that peak spinal forces occur under inclined pull (lift) at upper elevations but inclined push at the lowermost one. Minimal spinal loads, on the other hand, occurred at and around vertical pull directions. Overall, spinal forces closely followed variations in the net external moment of pull-push forces at the L5-S1. Local lumbar muscles were most active in pulls while global extensor muscles in lifts. The trunk stability margin decreased with load elevation except at and around horizontal push; it peaked under pulls and reached minimum at vertical lifts. It also increased with antagonist activity in muscles and intra-abdominal pressure. Results provide insight into the marked effects of variation in the load orientation and elevation on muscle forces, spinal loads and trunk stability and hence offer help in rehabilitation, performance enhancement training and design of safer workplaces. Copyright © 2017 Elsevier Ltd. All rights reserved.

Energy flow analysis of amputee walking shows a proximally-directed transfer of energy in intact limbs, compared to a distally-directed transfer in prosthetic limbs at push-off.

PubMed

Weinert-Aplin, R A; Howard, D; Twiste, M; Jarvis, H L; Bennett, A N; Baker, R J

2017-01-01

Reduced capacity and increased metabolic cost of walking occurs in amputees, despite advances in prosthetic componentry. Joint powers can quantify deficiencies in prosthetic gait, but do not reveal how energy is exchanged between limb segments. This study aimed to quantify these energy exchanges during amputee walking. Optical motion and forceplate data collected during walking at a self-selected speed for cohorts of 10 controls, 10 unilateral trans-tibial, 10 unilateral trans-femoral and 10 bilateral trans-femoral amputees were used to determine the energy exchanges between lower limb segments. At push-off, consistent thigh and shank segment powers were observed between amputee groups (1.12W/kg vs. 1.05W/kg for intact limbs and 0.97W/kg vs. 0.99W/kg for prosthetic limbs), and reduced prosthetic ankle power, particularly in trans-femoral amputees (3.12W/kg vs. 0.87W/kg). Proximally-directed energy exchange was observed in the intact limbs of amputees and controls, while prosthetic limbs displayed distally-directed energy exchanges at the knee and hip. This study used energy flow analysis to show a reversal in the direction in which energy is exchanged between prosthetic limb segments at push-off. This reversal was required to provide sufficient energy to propel the limb segments and is likely a direct result of the lack of push-off power at the prosthetic ankle, particularly in trans-femoral amputees, and leads to their increased metabolic cost of walking. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

In the year 2525, if x ray is still alive, if lithography can survive, they may find...

NASA Astrophysics Data System (ADS)

Nistler, John L.; Michael, Mark; Hause, Fred N.; Edwards, Richard D.

1998-12-01

Data and discussions will be presented on the NTRM, National Technology Roadmap, for reticles based on a Process Integration perception. Specifically two layers are considered for this paper, the gate layer which is primarily a chrome geometry mask with a lot of open glass and a local interconnect layer which is primarily a chrome plate using clear geometries. Information from other sources is used where appropriate and actual in-house data is used to illustrate specific points. Realizing that demands from different customers for specific types of features tend to drive specific mask makers and their decisions on equipment purchases and processes. We attempt to help predict where Integration approaches have either caused a lag in technology pushes or have actually speeded up certain requirements. Discussions of integration requirements, which tend to push maskmakers, will be presented. Along with typical design approaches in OPC and PSM which either will push technology or actually slow down the trend towards smaller geometries. In addition, data will be presented showing how specific stepper characteristics may actually drive the customer's criteria, thus changing the requirements from customer to customer.

Foot forces induced through Tai Chi push-hand exercises.

PubMed

Wong, Shiu Hong; Ji, Tianjian; Hong, Youlian; Fok, Siu Lun; Wang, Lin

2013-08-01

The low impact forces of Tai Chi push-hand exercises may be particularly suited for older people and for those with arthritis; however, the biomechanics of push-hand exercises have not previously been reported. This paper examines the ground reaction forces (GRFs) and plantar force distributions during Tai Chi push-hand exercises in a stationary stance with and without an opponent. Ten male Tai Chi practitioners participated in the study. The GRFs of each foot were measured in three perpendicular directions using two force plates (Kistler). The plantar force distribution of each foot was measured concurrently using an insole sensor system (Novel). The results showed that the average maximum vertical GRF of each foot was not more than 88% ± 6.1% of the body weight and the sum of the vertical forces (103% ± 1.4%) generated by the two feet approximately equals the body weight at any one time. The horizontal GRFs generated by the two feet were in the opposite directions and the measured mean peak values were not more than 12% ± 2.8% and 17% ± 4.3% of the body weight in the medio-lateral and antero-posterior directions respectively. Among the nine plantar areas, the toes sustained the greatest plantar force. This study indicates that push-hand exercises generate lower vertical forces than those induced by walking, bouncing, jumping and Tai Chi gait, and that the greatest plantar force is located in the toe area, which may have an important application in balance training particularly for older adults.

Control of vertical posture while standing on a sliding board and pushing an object.

PubMed

Lee, Yun-Ju; Chen, Bing; Liang, Jing-Nong; Aruin, Alexander S

2018-03-01

Voluntary pushing or translation perturbation of the support surface each induces a body perturbation that affects postural control. The objective of the study was to investigate anticipatory (APA) and compensatory (CPA) postural adjustments when pushing an object (that induces self-initiated perturbation) and standing on a sliding board (that induces translational perturbation). Thirteen healthy young participants were instructed to push a handle with both hands while standing on a sliding board that was either free to move in the anterior-posterior direction or stationary. Electromyographic activity (EMG) of trunk and lower extremity muscles, center of pressure (COP) displacements, and the forces exerted by the hand were recorded and analyzed during the APA and CPA phases. When the sliding board was free to move during pushing (translation perturbation), onsets of activity of ventral leg muscles and COP displacement were delayed as compared to pushing when standing on a stationary board. Moreover, magnitudes of shank muscle activity and the COP displacement were decreased. When pushing heavier weight, magnitudes of muscle activity, COP displacement, and pushing force increased. The magnitude of activity of the shank muscles during the APA and CPA phases in conditions with translational perturbation varied with the magnitude of the pushing weight. The outcome of the study suggests that the central nervous system prioritizes the pushing task while attenuates the source of additional perturbation induced by translation perturbation. These results could be used in the development of balance re-training paradigms involving pushing weight while standing on a sliding surface.

NASA Green Flight Challenge: Conceptual Design Approaches and Technologies to Enable 200 Passenger Miles per Gallon

NASA Technical Reports Server (NTRS)

Wells, Douglas P.

2011-01-01

The Green Flight Challenge is one of the National Aeronautics and Space Administration s Centennial Challenges designed to push technology and make passenger aircraft more efficient. Airliners currently average around 50 passenger-miles per gallon and this competition will push teams to greater than 200 passenger-miles per gallon. The aircraft must also fly at least 100 miles per hour for 200 miles. The total prize money for this competition is $1.65 Million. The Green Flight Challenge will be run by the Comparative Aircraft Flight Efficiency (CAFE) Foundation September 25 October 1, 2011 at Charles M. Schulz Sonoma County Airport in California. Thirteen custom aircraft were developed with electric, bio-diesel, and other bio-fuel engines. The aircraft are using various technologies to improve aerodynamic, propulsion, and structural efficiency. This paper will explore the feasibility of the rule set, competitor vehicles, design approaches, and technologies used.

Does External Funding Push Doctoral Supervisors to Be More Directive? A Large-Scale Danish Study

ERIC Educational Resources Information Center

Wichmann-Hansen, Gitte; Herrmann, Kim Jesper

2017-01-01

Around the world, changing funding policies have pushed for university departments to find increased external project-based funding. While this trend is widely acknowledged, mixed views exist about implications for faculty members' academic practices. Regarding doctoral education, researchers have raised concern that external funding will push…

A Future-Focus for Teaching and Learning: Technology Education in Two New Zealand Secondary Schools

ERIC Educational Resources Information Center

Reinsfield, Elizabeth

2016-01-01

Technology education has been a part of the New Zealand curriculum in many forms since its inception as a craft subject. With a global push towards technological innovation and an increased awareness of the impact of technology on society, it is reasonable to assume that technology education has an established role in student learning around the…

Shedding a Little (Sun)light on Data Analysis and Technology

ERIC Educational Resources Information Center

Winkel, Brian

2012-01-01

We present background and an activity meant to show both instructors and students that mere button pushing with technology is insufficient for success, but that additional thought and preparation will permit the technology to serve as an excellent tool in the understanding and learning of mathematics. (Contains 5 figures.)

Technology Push

ERIC Educational Resources Information Center

Kennedy, Mike

2008-01-01

When students, teachers, administrators and others employed in education arrive at work every day on thousands of campuses across the nation, it should come as no surprise that at every step along the way, technology is there to greet them. Technological advancements in education, as well as in facilities operation and management, are not a…

The focal plane adaptive optics test box of the Observatoire du Mont-Mégantic

NASA Astrophysics Data System (ADS)

Deschênes, William; Brousseau, Denis; Lavigne, Jean-Francois; Thibault, Simon; Véran, Jean-Pierre

2014-08-01

With the upcoming construction of Extremely Large Telescopes, several existing technologies are being pushed beyond their performance limit and it becomes essential to develop and evaluate new alternatives. The "Observatoire du Mont Mégantic" (OMM) hosts a telescope having a 1.6-meter diameter primary. The OMM telescope is known to be an excellent location to develop and test precursor instruments which are then upscaled to larger telescopes (ex. SPIOMM which led to SITELLE at the CFHT). We present a specifically designed focal plane box for the OMM which will allow to evaluate, directly on-sky, the performance of a number of next generation adaptive optics related technologies The system will able us to compare the performance of several new wavefront sensors in contrast with the current standard, the Shack-Hartman wavefront sensor.

Pushing/bearing down methods for the second stage of labour.

PubMed

Lemos, Andrea; Amorim, Melania M R; Dornelas de Andrade, Armele; de Souza, Ariani I; Cabral Filho, José Eulálio; Correia, Jailson B

2015-10-09

Maternal pushing during the second stage of labour is an important and indispensable contributor to the involuntary expulsive force developed by uterus contraction. Currently, there is no consensus on an ideal strategy to facilitate these expulsive efforts and there are contradictory results about the influence on mother and fetus. To evaluate the benefits and possible disadvantages of different kinds of techniques regarding maternal pushing/breathing during the expulsive stage of labour on maternal and fetal outcomes. We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (28 January 2015) and reference lists of retrieved studies. Randomised and quasi-randomised assessing the effects of pushing/bearing down techniques (type and/or timing) performed during the second stage of labour on maternal and neonatal outcomes. Cluster-RCTs were eligible for inclusion but none were identified. Studies using a cross-over design and those published in abstract form only were not eligible for inclusion.We considered the following comparisons.Timing of pushing: to compare pushing, which begins as soon as full dilatation has been determined versus pushing which begins after the urge to push is felt.Type of pushing: to compare pushing techniques that involve the 'Valsalva Manoeuvre' versus all other pushing techniques. Two review authors independently assessed trials for inclusion and risk of bias. Two review authors independently extracted data. Data were checked for accuracy. We included 20 studies in total, seven studies (815 women) comparing spontaneous pushing versus directed pushing, with or without epidural analgesia and 13 studies (2879 women) comparing delayed pushing versus immediate pushing with epidural analgesia. The results come from studies with a high or unclear risk of bias, especially selection bias and selective reporting bias. Comparison 1: types of pushing: spontaneous pushing versus directed pushingOverall, for this comparison there was no difference in the duration of the second stage (mean difference (MD) 11.60 minutes; 95% confidence interval (CI) -4.37 to 27.57, five studies, 598 women, random-effects, I(2): 82%; T(2): 220.06). There was no clear difference in perineal laceration (risk ratio (RR) 0.87; 95% CI 0.45 to 1.66, one study, 320 women) and episiotomy (average RR 1.05 ; 95% CI 0.60 to 1.85, two studies, 420 women, random-effects, I(2) = 81%; T(2) = 0.14). The primary neonatal outcomes such as five-minute Apgar score less than seven was no different between groups (RR 0.35; 95% CI 0.01 to 8.43, one study, 320 infants), and the number of admissions to neonatal intensive care (RR 1.08; 95% CI 0.30 to 3.79, two studies, n = 393) also showed no difference between spontaneous and directed pushing and no data were available on hypoxic ischaemic encephalopathy.The duration of pushing (secondary maternal outcome) was five minutes less for the spontaneous group (MD -5.20 minutes; 95% CI -7.78 to -2.62, one study, 100 women). Comparison 2: timing of pushing: delayed pushing versus immediate pushing (all women with epidural)For the primary maternal outcomes, delayed pushing was associated with an increase of 54 minutes in the duration of the second stage of labour (MD 54.29 minutes; 95% CI 38.14 to 70.43; 10 studies, 2797 women, random-effects; I(2) = 91%; T(2) = 543.38), and there was no difference in perineal laceration (RR 0.94; 95% CI 0.78 to 1.14, seven studies. 2775 women) and episiotomy (RR 0.95; 95% CI 0.87 to 1.04, five studies, 2320 women). Delayed pushing was also associated with a 20-minute decrease in the duration of pushing (MD - 20.10; 95% CI -36.19 to -4.02, 10 studies, 2680 women, random-effects, I(2) = 96%; T(2) = 604.37) and an increase in spontaneous vaginal delivery (RR 1.07; 95% CI 1.03 to 1.11, 12 studies, 3114 women).For the primary neonatal outcomes, there was no difference between groups in admission to neonatal intensive care (RR 0.98; 95% CI 0.67 to 1.41, three studies, n = 2197) and five-minute Apgar score less than seven (RR 0.15; 95% CI 0.01 to 3.00, three studies, n = 413). There were no data on hypoxic ischaemic encephalopathy. Delayed pushing was associated with a greater incidence of low umbilical cord blood pH (RR 2.24; 95% CI 1.37 to 3.68) and increased the cost of intrapartum care by CDN$ 68.22 (MD 68.22, 95% CI 55.37, 81.07, one study, 1862 women). This review is based on a total of 20 included studies that were of a mixed methodological quality.Timing of pushing with epidural is consistent in that delayed pushing leads to a shortening of the actual time pushing and increase of spontaneous vaginal delivery at the expense of an overall longer duration of the second stage of labour and double the risk of a low umbilical cord pH (based only on one study). Nevertheless, there was no difference in the caesarean and instrumental deliveries, perineal laceration and episiotomy, and in the other neonatal outcomes (admission to neonatal intensive care, five-minute Apgar score less than seven and delivery room resuscitation) between delayed and immediate pushing. Futhermore, the adverse effects on maternal pelvic floor is still unclear.Therefore, there is insufficient evidence to justify routine use of any specific timing of pushing since the maternal and neonatal benefits and adverse effects of delayed and immediate pushing are not well established.For the type of pushing, with or without epidural, there is no conclusive evidence to support or refute any specific style or recommendation as part of routine clinical practice. Women should be encouraged to bear down based on their preferences and comfort.In the absence of strong evidence supporting a specific method or timing of pushing, patient preference and clinical situations should guide decisions.Further properly well-designed randomised controlled trials are required to add evidence-based information to the current knowledge. These trials should address clinically important maternal and neonatal outcomes and will provide more complete data to be incorporated into a future update of this review.

Push-Pull: Chemical Ecology-Based Integrated Pest Management Technology.

PubMed

Khan, Zeyaur; Midega, Charles A O; Hooper, Antony; Pickett, John

2016-07-01

Lepidopterous stemborers, and parasitic striga weeds belonging to the family Orobanchaceae, attack cereal crops in sub-Saharan Africa causing severe yield losses. The smallholder farmers are resource constrained and unable to afford expensive chemicals for crop protection. The push-pull technology, a chemical ecology- based cropping system, is developed for integrated pest and weed management in cereal-livestock farming systems. Appropriate plants were selected that naturally emit signaling chemicals (semiochemicals). Plants highly attractive for stemborer egg laying were selected and employed as trap crops (pull), to draw pests away from the main crop. Plants that repelled stemborer females were selected as intercrops (push). The stemborers are attracted to the trap plant, and are repelled from the main cereal crop using a repellent intercrop (push). Root exudates of leguminous repellent intercrops also effectively control the parasitic striga weed through an allelopathic mechanism. Their root exudates contain flavonoid compounds some of which stimulate germination of Striga hermonthica seeds, such as Uncinanone B, and others that dramatically inhibit their attachment to host roots, such as Uncinanone C and a number of di-C-glycosylflavones (di-CGFs), resulting in suicidal germination. The intercrop also improves soil fertility through nitrogen fixation, natural mulching, improved biomass, and control of erosion. Both companion plants provide high value animal fodder, facilitating milk production and diversifying farmers' income sources. The technology is appropriate to smallholder mixed cropping systems in Africa. Adopted by about 125,000 farmers to date in eastern Africa, it effectively addresses major production constraints, significantly increases maize yields, and is economical as it is based on locally available plants, not expensive external inputs.

Tensiometer, drive probe for use with environmental testing equipment, and methods of inserting environmental testing equipment into a sample

DOEpatents

Hubbell, Joel M.; Sisson, James B.

2005-07-26

A method of inserting a tensiometer into a sample, comprises providing a drive probe configured to be engaged by direct push equipment; supporting a porous member from the drive probe; and driving the drive probe into the sample using a cone penetrometer. A tensiometer comprises a drive probe configured to be engaged by direct push equipment or a cone penetrometer; a porous member supported by the drive probe; and a pressure sensor in pressure sensing relation to the porous member.

Matrix assisted laser desorption/ionization-mass spectrometry imaging (MALDI-MSI) for direct visualization of plant metabolites in situ

DOE PAGES

Sturtevant, Drew; Lee, Young -Jin; Chapman, Kent D.

2015-11-22

Direct visualization of plant tissues by matrix assisted laser desorption ionization-mass spectrometry imaging (MALDI-MSI) has revealed key insights into the localization of metabolites in situ. Recent efforts have determined the spatial distribution of primary and secondary metabolites in plant tissues and cells. Strategies have been applied in many areas of metabolism including isotope flux analyses, plant interactions, and transcriptional regulation of metabolite accumulation. Technological advances have pushed achievable spatial resolution to subcellular levels and increased instrument sensitivity by several orders of magnitude. Furthermore, it is anticipated that MALDI-MSI and other MSI approaches will bring a new level of understanding tomore » metabolomics as scientists will be encouraged to consider spatial heterogeneity of metabolites in descriptions of metabolic pathway regulation.« less

Matrix assisted laser desorption/ionization-mass spectrometry imaging (MALDI-MSI) for direct visualization of plant metabolites in situ

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sturtevant, Drew; Lee, Young -Jin; Chapman, Kent D.

Direct visualization of plant tissues by matrix assisted laser desorption ionization-mass spectrometry imaging (MALDI-MSI) has revealed key insights into the localization of metabolites in situ. Recent efforts have determined the spatial distribution of primary and secondary metabolites in plant tissues and cells. Strategies have been applied in many areas of metabolism including isotope flux analyses, plant interactions, and transcriptional regulation of metabolite accumulation. Technological advances have pushed achievable spatial resolution to subcellular levels and increased instrument sensitivity by several orders of magnitude. Furthermore, it is anticipated that MALDI-MSI and other MSI approaches will bring a new level of understanding tomore » metabolomics as scientists will be encouraged to consider spatial heterogeneity of metabolites in descriptions of metabolic pathway regulation.« less

Commercial Scholarship: Spinning Physics Research into a Business Enterprise

NASA Astrophysics Data System (ADS)

Butler, Orville

2013-03-01

The American Institute of Physics' Center for History of Physics has conducted a three year NSF funded study of physicist entrepreneurs during which we interviewed 140 physicists who have founded ninety-one startups. Forty of those companies have spun research out of twenty-some universities. Startups spun out of university research tend to be technology push companies, creating new potentially disruptive technologies for which markets do not yet clearly exist, in contrast to market pull companies founded to address innovations responding to market demands. This paper addresses the unique issues found in university spinout companies and their responses to them. While technology push companies are generally considered to be higher risk compared to market pull companies, the university spinouts in our study had a higher rate of both SBIR and venture capital funding than did the market pull companies in our study.

Exploring technology impacts of Healthcare 2.0 initiatives.

PubMed

Randeree, Ebrahim

2009-04-01

As Internet access proliferates and technology becomes more accessible, the number of people online has been increasing. Web 2.0 and the social computing phenomena (such as Facebook, Friendster, Flickr, YouTube, Blogger, and MySpace) are creating a new reality on the Web: Users are changing from consumers of Web-available information and resources to generators of information and content. Moving beyond telehealth and Web sites, the push toward Personal Health Records has emerged as a new option for patients to take control of their medical data and to become active participants in the push toward widespread digitized healthcare. There is minimal research on the impact of Web 2.0 in healthcare. This paper reviews the changing patient-physician relationship in the Healthcare 2.0 environment, explores the technological challenges, and highlights areas for research.

Technology Education in the United States: A National Survey.

ERIC Educational Resources Information Center

Alexander, N. Creighton; Allen, Michael; Nelson, Edward; Sisk, Phillip

1998-01-01

As a serious technology education shortage plagues the nation, a national survey with responses from 20 states shows some states are using creative methods to cultivate future educators and improve the state of technology literacy for all students. Trends include modularization, elementary programs, and a push for national and state standards.…

[Between sancticity and value of human life: in perspective of human cloning].

PubMed

Dyk, W

2001-01-01

The more we know, the more duties and greater responsibility we have. The dynamic development of biology carries a lot of hope for the freeing of mankind from genetic diseases. But the introduction of scientific thought necessarily has to be bound with the development of technology. It is wrong when technology dictates science a direction of development; when technique comes before ethics; and when technology does not respect the essence of a human being. The uncritical introduction of eugenics, especially cloning of people and rejecting all moral arguments, recalls inglorious acts of science when the ideology of progress determined the range of problems that researchers focused on. The same ideology of progress, although originating from other sources, pushes science toward a second extreme, into utilitarianism. In the article the author wishes to substantiate the necessity for researchers to respect ethical norms. Recognition of natural laws alone does not provide science with full development if the rights of conscience are violated.

Photovoltaics for high capacity space power systems

NASA Technical Reports Server (NTRS)

Flood, Dennis J.

1988-01-01

The anticipated energy requirements of future space missions will grow by factors approaching 100 or more, particularly as a permanent manned presence is established in space. The advances that can be expected in solar array performance and lifetime, when coupled with advanced, high energy density storage batteries and/or fuel cells, will continue to make photovoltaic energy conversion a viable power generating option for the large systems of the future. The specific technologies required to satisfy any particular set of power requirements will vary from mission to mission. Nonetheless, in almost all cases the technology push will be toward lighter weight and higher efficiency, whether of solar arrays of storage devices. This paper will describe the content and direction of the current NASA program in space photovoltaic technology. The paper will also discuss projected system level capabilities of photovoltaic power systems in the context of some of the new mission opportunities under study by NASA, such as a manned lunar base, and a manned visit to Mars.

Photovoltaics for high capacity space power systems

NASA Technical Reports Server (NTRS)

Flood, Dennis J.

1988-01-01

The anticipated energy requirements of future space missions will grow by factors approaching 100 or more, particularly as a permanent manned presence is established in space. The advances that can be expected in solar array performance and lifetime, when coupled with advanced, high energy density storage batteries and/or fuel cells, will continue to make photovoltaic energy conversion a viable power generating option for the large systems of the future. The specific technologies required to satisfy any particular set of power requirements will vary from mission to mission. Nonetheless, in almost all cases the technology push will be toward lighter weight and higher efficiency, whether of solar arrays or storage devices. This paper will describe the content and direction of the current NASA program in space photovoltaic technology. The paper will also discuss projected system level capabilities of photovoltaic power systems in the context of some of the new mission opportunities under study by NASA, such as a manned lunar base, and a manned visit to Mars.

Novel Thermal Powered Technology for UUV Persistent Surveillance

NASA Technical Reports Server (NTRS)

Jones, Jack A.; Chao, Yi

2006-01-01

Buoyancy Generation: Various technology attempts include melting a wax, which pushes directly against a piston (U.S. Patent 5,291,847) or against a bladder (Webb Research), using ammonia or Freon 21 (U.S. Patent 5,303,552), and using solar heat to expand an oil (www.space.com, April, 10, 2002). All these heat-activated buoyancy control designs have thus far proved impractical and have ultimately failed during repeated cycling in ocean testing. JPL has demonstrated fully reversible 10 C encapsulated wax phase change, which can be used to change buoyancy without electrical hydraulic pumps. This technique has greatly improved heat transfer and much better reversibility than previous designs. Power Generation: Ocean Thermal Energy Conversion (OTEC) systems have been designed that transfer deep, cold sea water to the surface to generate electricity using turbine cycles with ammonia or water as the working fluid. JPL has designed several UUV systems: 1) Using a propeller water turbine to generate power on a gliding submersible; 2) Employing a compact CO2 turbine cycle powered by moving through thermoclines; and 3) Using melted wax to directly produce power through a piston-geared generator.

Isolated and combined effects of asymmetric stance and pushing movement on the anticipatory and compensatory postural control.

PubMed

Lee, Yun-Ju; Aruin, Alexander S

2014-04-01

To investigate effects of symmetric and asymmetric stance and pushing movement on anticipatory and compensatory postural adjustments (APAs and CPAs). Ten healthy volunteers stood symmetrically (feet parallel) or asymmetrically (one foot forward and the other backward) and pushed a handle with both hands or right or left hand. Bilateral EMG activity of the trunk and leg muscles and center of pressure (COP) displacements in the anterior-posterior (AP) and medial-lateral (ML) directions were recorded and analyzed during the APAs and CPAs. Isolated asymmetry of stance was associated with larger muscle activity of the backward leg while isolated asymmetry of pushing movement induced larger trunk muscle activity on the contralateral side. A combined asymmetry of stance and pushing movement resulted in the increase or decrease of the thigh muscle activity and ML COP displacement depending on whether both asymmetries were induced on the same side of the body or on opposite sides. Both isolated and combined asymmetries affect APAs and CPAs in pushing. Using combined asymmetry of stance and arm movement might be beneficial in performing pushing activity. The outcome of the study provides a basis for studying postural control in individuals with unilateral impairment while performing daily tasks involving pushing. Copyright © 2013 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

High-resolution vertical profiles of groundwater electrical conductivity (EC) and chloride from direct-push EC logs

NASA Astrophysics Data System (ADS)

Bourke, Sarah A.; Hermann, Kristian J.; Hendry, M. Jim

2017-11-01

Elevated groundwater salinity associated with produced water, leaching from landfills or secondary salinity can degrade arable soils and potable water resources. Direct-push electrical conductivity (EC) profiling enables rapid, relatively inexpensive, high-resolution in-situ measurements of subsurface salinity, without requiring core collection or installation of groundwater wells. However, because the direct-push tool measures the bulk EC of both solid and liquid phases (ECa), incorporation of ECa data into regional or historical groundwater data sets requires the prediction of pore water EC (ECw) or chloride (Cl-) concentrations from measured ECa. Statistical linear regression and physically based models for predicting ECw and Cl- from ECa profiles were tested on a brine plume in central Saskatchewan, Canada. A linear relationship between ECa/ECw and porosity was more accurate for predicting ECw and Cl- concentrations than a power-law relationship (Archie's Law). Despite clay contents of up to 96%, the addition of terms to account for electrical conductance in the solid phase did not improve model predictions. In the absence of porosity data, statistical linear regression models adequately predicted ECw and Cl- concentrations from direct-push ECa profiles (ECw = 5.48 ECa + 0.78, R 2 = 0.87; Cl- = 1,978 ECa - 1,398, R 2 = 0.73). These statistical models can be used to predict ECw in the absence of lithologic data and will be particularly useful for initial site assessments. The more accurate linear physically based model can be used to predict ECw and Cl- as porosity data become available and the site-specific ECw-Cl- relationship is determined.

LightSAR Pushes Both the Technology and the Economics

NASA Technical Reports Server (NTRS)

Bard, S.

1998-01-01

As part of the strategic plan for its Earth Science Enterprise, the U.S. National Aeronautics and Space Administration (NASA) is committed to fostering the development and prosperous use of imaging radar science and technology in both the public and private sectors.

Walker devices and microswitch technology to enhance assisted indoor ambulation by persons with multiple disabilities: three single-case studies.

PubMed

Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Sigafoos, Jeff; Oliva, Doretta; Campodonico, Francesca; Buono, Serafino

2013-07-01

These three single-case studies assessed the use of walker devices and microswitch technology for promoting ambulation behavior among persons with multiple disabilities. The walker devices were equipped with support and weight lifting features. The microswitch technology ensured that brief stimulation followed the participants' ambulation responses. The participants were two children (i.e., Study I and Study II) and one man (i.e., Study III) with poor ambulation performance. The ambulation efforts of the child in Study I involved regular steps, while those of the child in Study II involved pushing responses (i.e., he pushed himself forward with both feet while sitting on the walker's saddle). The man involved in Study III combined his poor ambulation performance with problem behavior, such as shouting or slapping his face. The results were positive for all three participants. The first two participants had a large increase in the number of steps/pushes performed during the ambulation events provided and in the percentages of those events that they completed independently. The third participant improved his ambulation performance as well as his general behavior (i.e., had a decline in problem behavior and an increase in indices of happiness). The wide-ranging implications of the results are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Biomechanically determined hand force limits protecting the low back during occupational pushing and pulling tasks.

PubMed

Weston, Eric B; Aurand, Alexander; Dufour, Jonathan S; Knapik, Gregory G; Marras, William S

2018-06-01

Though biomechanically determined guidelines exist for lifting, existing recommendations for pushing and pulling were developed using a psychophysical approach. The current study aimed to establish objective hand force limits based on the results of a biomechanical assessment of the forces on the lumbar spine during occupational pushing and pulling activities. Sixty-two subjects performed pushing and pulling tasks in a laboratory setting. An electromyography-assisted biomechanical model estimated spinal loads, while hand force and turning torque were measured via hand transducers. Mixed modelling techniques correlated spinal load with hand force or torque throughout a wide range of exposures in order to develop biomechanically determined hand force and torque limits. Exertion type, exertion direction, handle height and their interactions significantly influenced dependent measures of spinal load, hand force and turning torque. The biomechanically determined guidelines presented herein are up to 30% lower than comparable psychophysically derived limits and particularly more protective for straight pushing. Practitioner Summary: This study utilises a biomechanical model to develop objective biomechanically determined push/pull risk limits assessed via hand forces and turning torque. These limits can be up to 30% lower than existing psychophysically determined pushing and pulling recommendations. Practitioners should consider implementing these guidelines in both risk assessment and workplace design moving forward.

Relationship between shoulder roll and hand propulsion in the front crawl stroke.

PubMed

Kudo, Shigetada; Sakurai, Yoshihisa; Miwa, Takahiro; Matsuda, Yuji

2017-05-01

This study re-evaluated the magnitude of hand propulsion (HP) in the pull and push phases of the front crawl stroke and investigated the association between the angular velocity of shoulder roll (ω SR ) and hand propulsive lift (HP L ). ω SR was computed in the plane normal to a forward direction for 16 skilled swimmers performing the front crawl stroke at a maximal sprinting pace. HP, hand propulsive drag (HP D ) and HP L were determined by a dynamic pressure approach. HP and HP D in the pull phase were greater than in the push phase (P < 0.05) while HP L in the pull phase was similar to that in the push phase. Eleven swimmers out of the 16 swimmers had a significant within-swimmers correlation between ω SR and HP L in the push phase (P < 0.05). That is, HP L increased in the push phase as the ω SR of rolling back to the neutral position became faster. A swimmer should use more drag for hand propulsion in the pull phase and propulsion from drag and lift equally in the push phase. Based on the relationship between ω SR and HP L in the push phase, a possible stroke technique to enhance HP L using ω SR is discussed.

Effects of pushing height on trunk posture and trunk muscle activity when a cart suddenly starts or stops moving.

PubMed

Lee, Yun-Ju; Hoozemans, Marco J M; van Dieën, Jaap H

2012-01-01

Unexpected sudden (un)loading of the trunk may induce inadequate responses of trunk muscles and uncontrolled trunk motion. These unexpected perturbations may occur in pushing tasks, when the cart suddenly starts moving (unloading) or is blocked by an obstacle (loading). In pushing, handle height affects the user's working posture, which may influence trunk muscle activity and trunk movement in response to the perturbation. Eleven healthy male subjects pushed a 200 kg cart with handles at shoulder and hip height in a start condition (sudden release of brakes) and a stop condition (bumping into an obstacle). Before the perturbation, the baseline of the trunk inclination, internal moment and trunk extensor muscle activity were significantly higher when pushing at hip height than at shoulder height. After the perturbation, the changes in trunk inclination and internal moment were significantly larger when pushing at shoulder height than at hip height in both conditions. The opposite directions of changes in trunk inclination and internal moment suggest that the unexpected perturbations caused uncontrolled trunk motion. Pushing at shoulder height may impose a high risk of low-back injury due to the low trunk stiffness and large involuntary trunk motion occurring after carts suddenly move or stop.

Getting up to speed. Execs detail IT needs, investments required to support an ACO.

PubMed

Evans, Melanie

2012-02-20

The push for accountable care organizations means a push for more information technology that allows the sharing of data. So hospitals and other providers that are forming ACOs are feeling new urgency to ramp up their IT improvements. At Banner Health it means figuring out how to deal with independent physicians' "mishmash" of systems. "There has been an acceleration of interest," says Dr. John Hensing, left, Banner's chief medical officer.

Fog as a fresh-water resource: overview and perspectives.

PubMed

Klemm, Otto; Schemenauer, Robert S; Lummerich, Anne; Cereceda, Pilar; Marzol, Victoria; Corell, David; van Heerden, Johan; Reinhard, Dirk; Gherezghiher, Tseggai; Olivier, Jana; Osses, Pablo; Sarsour, Jamal; Frost, Ernst; Estrela, María J; Valiente, José A; Fessehaye, Gebregiorgis Mussie

2012-05-01

The collection of fog water is a simple and sustainable technology to obtain fresh water for afforestation, gardening, and as a drinking water source for human and animal consumption. In regions where fresh water is sparse and fog frequently occurs, it is feasible to set up a passive mesh system for fog water collection. The mesh is directly exposed to the atmosphere, and the foggy air is pushed through the mesh by the wind. Fog droplets are deposited on the mesh, combine to form larger droplets, and run down passing into a storage tank. Fog water collection rates vary dramatically from site to site but yearly averages from 3 to 10 l m(-2) of mesh per day are typical of operational projects. The scope of this article is to review fog collection projects worldwide, to analyze factors of success, and to evaluate the prospects of this technology.

Pushing the Boundaries of Technology, Education, and Design.

ERIC Educational Resources Information Center

Schneider, Jay W.

2000-01-01

Examines Sinclair Community College's (Dayton, OH) development of their 75,000 sq.ft. Center for Interactive Learning where the limits of technology in education can be experimented with, explored, and tested. Design planning, building function, design features, and furniture and finishes are discussed. (GR)

An HDR imaging method with DTDI technology for push-broom cameras

NASA Astrophysics Data System (ADS)

Sun, Wu; Han, Chengshan; Xue, Xucheng; Lv, Hengyi; Shi, Junxia; Hu, Changhong; Li, Xiangzhi; Fu, Yao; Jiang, Xiaonan; Huang, Liang; Han, Hongyin

2018-03-01

Conventionally, high dynamic-range (HDR) imaging is based on taking two or more pictures of the same scene with different exposure. However, due to a high-speed relative motion between the camera and the scene, it is hard for this technique to be applied to push-broom remote sensing cameras. For the sake of HDR imaging in push-broom remote sensing applications, the present paper proposes an innovative method which can generate HDR images without redundant image sensors or optical components. Specifically, this paper adopts an area array CMOS (complementary metal oxide semiconductor) with the digital domain time-delay-integration (DTDI) technology for imaging, instead of adopting more than one row of image sensors, thereby taking more than one picture with different exposure. And then a new HDR image by fusing two original images with a simple algorithm can be achieved. By conducting the experiment, the dynamic range (DR) of the image increases by 26.02 dB. The proposed method is proved to be effective and has potential in other imaging applications where there is a relative motion between the cameras and scenes.

Promoting Individual Health Using Information Technology: Trends in the US Health System

ERIC Educational Resources Information Center

Nimkar, Swateja

2016-01-01

Objectives: Advances in electronics, the Internet and telecommunication have pushed the field of health care to embrace information technology (IT). However, the purposeful use of technology is relatively new to the field of health promotion. The primary objective of this paper is to review various applications of health IT, with a focus on its…

Evaluating minerals of environmental concern using spectroscopy

USGS Publications Warehouse

Swayze, G.A.; Clark, R.N.; Higgins, C.T.; Kokaly, R.F.; Livo, K. Eric; Hoefen, T.M.; Ong, C.; Kruse, F.A.

2006-01-01

Imaging spectroscopy has been successfully used to aid researchers in characterizing potential environmental impacts posed by acid-rock drainage, ore-processing dust on mangroves, and asbestos in serpentine mineral deposits and urban dust. Many of these applications synergistically combine field spectroscopy with remote sensing data, thus allowing more-precise data calibration, spectral analysis of the data, and verification of mapping. The increased accuracy makes these environmental evaluation tools efficient because they can be used to focus field work on those areas most critical to the research effort. The use of spectroscopy to evaluate minerals of environmental concern pushes current imaging spectrometer technology to its limits; we present laboratory results that indicate the direction for future designs of imaging spectrometers.

Sustainable Financing of Innovative Therapies: A Review of Approaches.

PubMed

Hollis, Aidan

2016-10-01

The process of innovation is inherently complex, and it occurs within an even more complex institutional environment characterized by incomplete information, market power, and externalities. There are therefore different competing approaches to supporting and financing innovation in medical technologies, which bring their own advantages and disadvantages. This article reviews value- and cost-based pricing, as well direct government funding, and cross-cutting institutional structures. It argues that performance-based risk-sharing agreements are likely to have little effect on the sustainability of financing; that there is a role for cost-based pricing models in some situations; and that the push towards longer exclusivity periods is likely contrary to the interests of industry.

Varo-achro-phobia: the fear of broad spectrum zoom optics

NASA Astrophysics Data System (ADS)

Vogel, Steven; Pollica, Naomi

2015-05-01

Today's battlefield is evolving at light speed. Our war fighters are being tasked with highly complex missions requiring the very best technology our industry can offer. The demand for advanced ISR platforms is challenging designers and engineers in the optics industry to push the envelope and develop wider band solutions to support multiple and broadband sensor platforms. Recently, significant attention has been directed towards the development of optical systems that enable simultaneous operation in the visible and shortwave infrared spectral wavebands. This paper will present a review of the evolution of StingRay Optics' GhostSight™ continuous zoom optics that offer broad chromatic imaging capabilities from the visible through the shortwave infrared spectrum.

Nano-optomechanics with optically levitated nanoparticles

NASA Astrophysics Data System (ADS)

Neukirch, Levi P.; Vamivakas, A. Nick

2015-01-01

Nano-optomechanics is a vibrant area of research that continues to push the boundary of quantum science and measurement technology. Recently, it has been realised that the optical forces experienced by polarisable nanoparticles can provide a novel platform for nano-optomechanics with untethered mechanical oscillators. Remarkably, these oscillators are expected to exhibit quality factors approaching ?. The pronounced quality factors are a direct result of the mechanical oscillator being freed from a supporting substrate. This review provides an overview of the basic optical physics underpinning optical trapping and optical levitation experiments, it discusses a number of experimental approaches to optical trapping and finally outlines possible applications of this nano-optomechanics modality in hybrid quantum systems and nanoscale optical metrology.

Determinants and magnitudes of manual force strengths and joint moments during two-handed standing maximal horizontal pushing and pulling.

PubMed

Chow, Amy Y; Dickerson, Clark R

2016-04-01

Pushing and pulling are common occupational exertions that are increasingly associated with musculoskeletal complaints. This study focuses on the sensitivity of shoulder capacity to gender, handle height, exertion type (push or pull) and handle orientation for these tasks. All factors except for handle orientation influenced unilateral and total manual force strength (p < 0.01), with exertion type being the most influential. Interaction effects also existed between handle height and exertion type. Additionally, joint moments at the shoulders and low back were influenced by all factors studied (p < 0.01), with exertion type again being most influential. Knowledge of the relative influence of multiple factors on shoulder capacity can provide guidance regarding these factors when designing or evaluating occupational pushing and pulling tasks for a diverse population. Practitioner Summary: pushing and pulling comprise nearly half of all manual materials handling tasks. Practitioners often assess, design or modify these tasks while incorporating constraints, including manual force direction and handle interface. This study provides guidance to aid design of pushing and pulling tasks in the context of shoulder physical capacity.

The defence technique in Tai Chi Push Hands: a case study.

PubMed

Chen, Hui-Chuan; Cheng, Kuang-You B; Liu, Yu-Jen; Chiu, Hung-Ta; Cheng, Kuang-Yu

2010-12-01

Developed from traditional Chinese martial arts, Tai Chi exercise includes different forms and interactive Push Hands but biomechanical analyses have focused on the former only. To analyse the techniques of Push Hands, an experienced master was asked to defend pushing by four opponents. Movements were videotaped and digitized using a motion analysis system. Surface electrodes were used to record the electromyographic activity of ten muscle groups. Two force plates were used to measure the ground reaction force on each foot. Inexperienced individuals performed the same procedure to serve as the control group. The results indicate that the master adopted a postural adjustment to maintain balance. A clear shift of body weight from the front to the rear foot and mediolateral displacement of the centre of gravity was observed. Low electromyographic activity was observed in the upper body muscle groups, while high electromyographic activity was observed in the right rectus femoris and very high activity in the left rectus femoris during the defence. All inexperienced participants lost their balance in resisting pushing. It is concluded that the Tai Chi defensive technique includes a subtle postural adjustment that slightly changes the pushing force direction, and allows the rear leg to resist the incoming force.

New devices for measuring forces on the kayak foot bar and on the seat during flat-water kayak paddling: a technical report.

PubMed

Nilsson, Johnny E; Rosdahl, Hans G

2014-03-01

The purpose was to develop and validate portable force-measurement devices for recording push and pull forces applied by each foot to the foot bar of a kayak and the horizontal force at the seat. A foot plate on a single-point force transducer mounted on the kayak foot bar underneath each foot allowed the push and pull forces to be recorded. Two metal frames interconnected with 4 linear ball bearings, and a force transducer allowed recording of horizontal seat force. The foot-bar-force device was calibrated by loading each foot plate with weights in the push-pull direction perpendicular to the foot plate surface, while the seat-force device was calibrated to horizontal forces with and without weights on the seat. A strong linearity (r2 = .99-1.0) was found between transducer output signal and load force in the push and pull directions for both foot-bar transducers perpendicular to the foot plate and the seat-force-measuring device. Reliability of both devices was tested by means of a test-retest design. The coefficient of variation (CV) for foot-bar push and pull forces ranged from 0.1% to 1.1%, and the CV for the seat forces varied from 0.6% to 2.2%. The current study opens up a field for new investigations of the forces generated in the kayak and ways to optimize kayak-paddling performance.

Control of trunk motion following sudden stop perturbations during cart pushing.

PubMed

Lee, Yun-Ju; Hoozemans, Marco J M; van Dieën, Jaap H

2011-01-04

External perturbations during pushing tasks have been suggested to be a risk factor for low-back symptoms. An experiment was designed to investigate whether self-induced and externally induced sudden stops while pushing a high inertia cart influence trunk motions, and how flexor and extensor muscles counteract these perturbations. Twelve healthy male participants pushed a 200 kg cart at shoulder height and hip height. Pushing while walking was compared to situations in which participants had to stop the cart suddenly (self-induced stop) or in which the wheels of the cart were unexpectedly blocked (externally induced stop). For the perturbed conditions, the peak values and the maximum changes from the reference condition (pushing while walking) of the external moment at L5/S1, trunk inclination and electromyographic amplitudes of trunk muscles were determined. In the self-induced stop, a voluntary trunk extension occurred. Initial responses in both stops consisted of flexor and extensor muscle cocontraction. In self-induced stops this was followed by sustained extensor activity. In the externally induced stops, an external extension moment caused a decrease in trunk inclination. The opposite directions of the internal moment and trunk motion in the externally induced stop while pushing at shoulder height may indicate insufficient active control of trunk posture. Consequently, sudden blocking of the wheels in pushing at shoulder height may put the low back at risk of mechanical injury. Copyright © 2010 Elsevier Ltd. All rights reserved.

3-D surface scan of biological samples with a push-broom imaging spectrometer

USDA-ARS?s Scientific Manuscript database

The food industry is always on the lookout for sensing technologies for rapid and nondestructive inspection of food products. Hyperspectral imaging technology integrates both imaging and spectroscopy into unique imaging sensors. Its application for food safety and quality inspection has made signifi...

The compression and expansion waves of the forward and backward flows: an in-vitro arterial model.

PubMed

Feng, J; Khir, A W

2008-05-01

Although the propagation of arterial waves of forward flows has been studied before, that of backward flows has not been thoroughly investigated. The aim of this research is to investigate the propagation of the compression and expansion waves of backward flows in terms of wave speed and dissipation, in flexible tubes. The aim is also to compare the propagation of these waves with those of forward flows. A piston pump generated a flow waveform in the shape of approximately half-sinusoid, in flexible tubes (12 mm and 16 mm diameter). The pump produced flow in either the forward or the backward direction by moving the piston forward, in a 'pushing action' or backward, in a 'pulling action', using a graphite brushes d.c. motor. Pressure and flow were measured at intervals of 5 cm along each tube and wave speed was determined using the PU-loop method. The simultaneous measurements of diameter were also taken at the same position of the pressure and flow in the 16 mm tube. Wave intensity analysis was used to determine the magnitude of the pressure and velocity waveforms and wave intensity in the forward and backward directions. Under the same initial experimental conditions, wave speed was higher during the pulling action (backward flow) than during the pushing action (forward flow). The amplitudes of pressure and velocity in the pulling action were significantly higher than those in the pushing action. The tube diameter was approximately 20 per cent smaller in the pulling action than in the pushing action in the 16 mm tube. The compression and expansion waves resulting from the pushing and pulling actions dissipated exponentially along the travelling distance, and their dissipation was greater in the smaller than in the larger tubes. Local wave speed in flexible tubes is flow direction- and wave nature-dependent and is greater with expansion than with compression waves. Wave dissipation has an inverse relationship with the vessel diameter, and dissipation of the expansion wave of the pulling action was greater than that of the pushing action.

The Key to Competitiveness: Understanding the Next Generation Learner--A Guide for College and University Leaders

ERIC Educational Resources Information Center

American Association of State Colleges and Universities, 2004

2004-01-01

It is unclear whether the Net generation is pushing innovations in communications technologies (because of their fascination with it) or if advances in communications technologies are influencing the Net generation. That discussion is not nearly as relevant as their perceptions of the role technology plays in their lives. Whereas the older peers…

Advanced space propulsion concepts

NASA Technical Reports Server (NTRS)

Lapointe, Michael R.

1993-01-01

The NASA Lewis Research Center has been actively involved in the evaluation and development of advanced spacecraft propulsion. Recent program elements have included high energy density propellants, electrode less plasma thruster concepts, and low power laser propulsion technology. A robust advanced technology program is necessary to develop new, cost-effective methods of spacecraft propulsion, and to continue to push the boundaries of human knowledge and technology.

Fed Up with Delays, a President Pushes To Outsource Technology Operations.

ERIC Educational Resources Information Center

Olsen, Florence

2002-01-01

Discusses how officials at Salt Lake Community College decided the only way they could get the kind of technology service they needed was to hire a company to run the operation; the plan will not save money, but seeks better service and room for expansion. (EV)

A Systems Approach to Expanding the Technology Readiness Level within Defense Acquisition

DTIC Science & Technology

2008-01-01

Administration’s (NASA) post-Apollo era as ontology for contracting support (Sadin, Povinelli & Rosen, 1989). In the last nine years, other...1008-1023. Sadin, S. R., Povinelli , F. P., & Rosen, R. (1989). The NASA technology push towards future space mis- sion systems. Acta Astronautica

Are We Ready for the Virtual Library? Technology Push, Market Pull and Organisational Response.

ERIC Educational Resources Information Center

Gilbert, J. D.

1993-01-01

Discusses virtual libraries, i.e., library services available to users via personal computers; considers the issues of technological development, user demands, and organizational response; and describes progress toward virtual libraries in the Netherlands, including networks, online systems, navigation tools, subject classification, coordination…

Pushing Buttons: A Sociomaterial Exploration of the Distributed Lecture

ERIC Educational Resources Information Center

MacLeod, Anna; Cameron, Paula; Kits, Olga; Fournier, Cathy

2017-01-01

Current research on telepresence tends to engage a celebratory, taken-for-granted view of technology as a vehicle for improved communication and a mere backdrop against which communication unfolds. However, a growing body of literature interrogates the neutrality of technological environments in education. This paper considers the practice of…

Silica waveguide devices and their applications

NASA Astrophysics Data System (ADS)

Sun, C. J.; Schmidt, Kevin M.; Lin, Wenhua

2005-03-01

Silica waveguide technology transitioned from laboratories to commercial use in early 1990. Since then, various applications have been exploited based on this technology. Tens of thousands of array waveguide grating (AWG) devices have been installed worldwide for DWDM Mux and Demux. The recent FTTH push in Japan has renewed the significance of this technology for passive optical network (PON) application. This paper reviews the past development of this technology, compare it with competing technologies, and outline the future role of this technology in the evolving optical communications.

Relationship between linear velocity and tangential push force while turning to change the direction of the manual wheelchair.

PubMed

Hwang, Seonhong; Lin, Yen-Sheng; Hogaboom, Nathan S; Wang, Lin-Hwa; Koontz, Alicia M

2017-08-28

Wheelchair propulsion is a major cause of upper limb pain and injuries for manual wheelchair users with spinal cord injuries (SCIs). Few studies have investigated wheelchair turning biomechanics on natural ground surfaces. The purpose of this study was to investigate the relationship between tangential push force and linear velocity of the wheelchair during the turning portions of propulsion. Using an instrumented handrim, velocity and push force data were recorded for 25 subjects while they propel their own wheelchairs on a concrete floor along a figure-eight-shaped course at a maximum velocity. The braking force (1.03 N) of the inside wheel while turning was the largest of all other push forces (p<0.05). Larger changes in squared velocity while turning were significantly correlated with higher propulsive and braking forces used at the pre-turning, turning, and post-turning phases (p<0.05). Subjects with less change of velocity while turning needed less braking force to maneuver themselves successfully and safely around the turns. Considering the magnitude and direction of tangential force applied to the wheel, it seems that there are higher risks of injury and instability for upper limb joints when braking the inside wheel to turn. The results provide insight into wheelchair setup and mobility skills training for wheelchair users.

Micro/nano-mechanical test system employing tensile test holder with push-to-pull transformer

DOEpatents

Oh, Yunje; Cyrankowski, Edward; Shan, Zhiwei; Asif, Syed Amanula Syed

2013-05-07

A micromachined or microelectromechanical system (MEMS) based push-to-pull mechanical transformer for tensile testing of micro-to-nanometer scale material samples including a first structure and a second structure. The second structure is coupled to the first structure by at least one flexible element that enables the second structure to be moveable relative to the first structure, wherein the second structure is disposed relative to the first structure so as to form a pulling gap between the first and second structures such that when an external pushing force is applied to and pushes the second structure in a tensile extension direction a width of the pulling gap increases so as to apply a tensile force to a test sample mounted across the pulling gap between a first sample mounting area on the first structure and a second sample mounting area on the second structure.

Micro/nano-mechanical test system employing tensile test holder with push-to-pull transformer

DOEpatents

Oh, Yunje; Cyrankowski, Edward; Shan, Zhiwei; Syed Asif, Syed Amanula

2014-07-29

A micromachined or microelectromechanical system (MEMS) based push-to-pull mechanical transformer for tensile testing of micro-to-nanometer scale material samples including a first structure and a second structure. The second structure is coupled to the first structure by at least one flexible element that enables the second structure to be moveable relative to the first structure, wherein the second structure is disposed relative to the first structure so as to form a pulling gap between the first and second structures such that when an external pushing force is applied to and pushes the second structure in a tensile extension direction a width of the pulling gap increases so as to apply a tensile force to a test sample mounted across the pulling gap between a first sample mounting area on the first structure and a second sample mounting area on the second structure.

On Parallel Push-Relabel based Algorithms for Bipartite Maximum Matching

DOE Office of Scientific and Technical Information (OSTI.GOV)

Langguth, Johannes; Azad, Md Ariful; Halappanavar, Mahantesh

2014-07-01

We study multithreaded push-relabel based algorithms for computing maximum cardinality matching in bipartite graphs. Matching is a fundamental combinatorial (graph) problem with applications in a wide variety of problems in science and engineering. We are motivated by its use in the context of sparse linear solvers for computing maximum transversal of a matrix. We implement and test our algorithms on several multi-socket multicore systems and compare their performance to state-of-the-art augmenting path-based serial and parallel algorithms using a testset comprised of a wide range of real-world instances. Building on several heuristics for enhancing performance, we demonstrate good scaling for themore » parallel push-relabel algorithm. We show that it is comparable to the best augmenting path-based algorithms for bipartite matching. To the best of our knowledge, this is the first extensive study of multithreaded push-relabel based algorithms. In addition to a direct impact on the applications using matching, the proposed algorithmic techniques can be extended to preflow-push based algorithms for computing maximum flow in graphs.« less

Additive manufactured push-fit implant fixation with screw-strength pull out.

PubMed

van Arkel, Richard J; Ghouse, Shaaz; Milner, Piers E; Jeffers, Jonathan R T

2017-10-11

Additive manufacturing offers exciting new possibilities for improving long-term metallic implant fixation in bone through enabling open porous structures for bony ingrowth. The aim of this research was to investigate how the technology could also improve initial fixation, a precursor to successful long-term fixation. A new barbed fixation mechanism, relying on flexible struts was proposed and manufactured as a push-fit peg. The technology was optimized using a synthetic bone model and compared with conventional press-fit peg controls tested over a range of interference fits. Optimum designs, achieving maximum pull-out force, were subsequently tested in a cadaveric femoral condyle model. The barbed fixation surface provided more than double the pull-out force for less than a third of the insertion force compared to the best performing conventional press-fit peg (p < 0.001). Indeed, it provided screw-strength pull out from a push-fit device (1,124 ± 146 N). This step change in implant fixation potential offers new capabilities for low profile, minimally invasive implant design, while providing new options to simplify surgery, allowing for one-piece push-fit components with high levels of initial stability. © 2017 The Authors. Journal of Orthopaedic Research Published by WileyPeriodicals, Inc. on behalf of the Orthopaedic Research Society. J Orthop Res 9999:1-11, 2017. © 2017 The Authors. Journal of Orthopaedic Research Published by WileyPeriodicals, Inc. on behalf of the Orthopaedic Research Society.

MAGIC: a European program to push the insertion of maskless lithography

NASA Astrophysics Data System (ADS)

Pain, L.; Icard, B.; Tedesco, S.; Kampherbeek, B.; Gross, G.; Klein, C.; Loeschner, H.; Platzgummer, E.; Morgan, R.; Manakli, S.; Kretz, J.; Holhe, C.; Choi, K.-H.; Thrum, F.; Kassel, E.; Pilz, W.; Keil, K.; Butschke, J.; Irmscher, M.; Letzkus, F.; Hudek, P.; Paraskevopoulos, A.; Ramm, P.; Weber, J.

2008-03-01

With the willingness of the semiconductor industry to push manufacturing costs down, the mask less lithography solution represents a promising option to deal with the cost and complexity concerns about the optical lithography solution. Though a real interest, the development of multi beam tools still remains in laboratory environment. In the frame of the seventh European Framework Program (FP7), a new project, MAGIC, started January 1st 2008 with the objective to strengthen the development of the mask less technology. The aim of the program is to develop multi beam systems from MAPPER and IMS nanofabrication technologies and the associated infrastructure for the future tool usage. This paper draws the present status of multi beam lithography and details the content and the objectives of the MAGIC project.

Recent progress in understanding the imaging and metrology using the helium ion microscope

NASA Astrophysics Data System (ADS)

Postek, Michael T.; Vladar, Andras E.; Ming, Bin

2009-05-01

Nanotechnology is pushing imaging and measurement instrument technology to high levels of required performance. As this continues, new barriers confronting innovation in this field are encountered. Particle beam instrument resolution remains one of these barriers. A new tool for imaging and metrology for nanotechnology is the scanning Helium Ion Microscope (HIM). The HIM is a new approach to imaging and metrology for nanotechnology which may be able to push this barrier lower. As a new methodology, it is just beginning to show promise and the number of potentially advantageous applications for nanotechnology and nanometrology has yet to be fully exploited. This presentation will discuss some of the progress made at NIST in collaboration with the manufacturing community in understanding the imaging and metrology for this new technology.

Optical pulling and pushing forces exerted on silicon nanospheres with strong coherent interaction between electric and magnetic resonances.

PubMed

Liu, Hongfeng; Panmai, Mingcheng; Peng, Yuanyuan; Lan, Sheng

2017-05-29

We investigated theoretically and numerically the optical pulling and pushing forces acting on silicon (Si) nanospheres (NSs) with strong coherent interaction between electric and magnetic resonances. We examined the optical pulling and pushing forces exerted on Si NSs by two interfering waves and revealed the underlying physical mechanism from the viewpoint of electric- and magnetic-dipole manipulation. As compared with a polystyrene (PS) NS, it was found that the optical pulling force for a Si NS with the same size is enlarged by nearly two orders of magnitude. In addition to the optical pulling force appearing at the long-wavelength side of the magnetic dipole resonance, very large optical pushing force is observed at the magnetic quadrupole resonance. The correlation between the optical pulling/pushing force and the directional scattering characterized by the ratio of the forward to backward scattering was revealed. More interestingly, it was found that the high-order electric and magnetic resonances in large Si NSs play an important role in producing optical pulling force which can be generated by not only s-polarized wave but also p-polarized one. Our finding indicates that the strong coherent interaction between the electric and magnetic resonances existing in nanoparticles with large refractive indices can be exploited to manipulate the optical force acting on them and the correlation between the optical force and the directional scattering can be used as guidance. The engineering and manipulation of optical forces will find potential applications in the trapping, transport and sorting of nanoparticles.

Wicked problems in space technology development at NASA

NASA Astrophysics Data System (ADS)

Balint, Tibor S.; Stevens, John

2016-01-01

Technological innovation is key to enable future space exploration missions at NASA. Technology development, however, is not only driven by performance and resource considerations, but also by a broad range of directly or loosely interconnected factors. These include, among others, strategy, policy and politics at various levels, tactics and programmatics, interactions between stakeholders, resource requirements, performance goals from component to system level, mission infusion targets, portfolio execution and tracking, and technology push or mission pull. Furthermore, at NASA, these influences occur on varying timescales and at diverse geographic locations. Such a complex and interconnected system could impede space technology innovation in this examined segment of the government environment. Hence, understanding the process through NASA's Planning, Programming, Budget and Execution cycle could benefit strategic thinking, planning and execution. Insights could be gained through suitable models, for example assessing the key drivers against the framework of Wicked Problems. This paper discusses NASA specific space technology innovation and innovation barriers in the government environment through the characteristics of Wicked Problems; that is, they do not have right or wrong solutions, only improved outcomes that can be reached through authoritative, competitive, or collaborative means. We will also augment the Wicked Problems model to account for the temporally and spatially coupled, and cyclical nature of this NASA specific case, and propose how appropriate models could improve understanding of the key influencing factors. In turn, such understanding may subsequently lead to reducing innovation barriers, and stimulating technology innovation at NASA. Furthermore, our approach can be adopted for other government-directed environments to gain insights into their structures, hierarchies, operational flow, and interconnections to facilitate circular dialogs towards preferred outcomes.

Review of past, present, and future of recording technology

NASA Astrophysics Data System (ADS)

Al-Jibouri, Abdul-Rahman

2003-03-01

The revolution of information storage and recording has been advanced significantly over the past two decades. Since the development of computers in early 1950s by IBM, the data (information) was stored on magnetic disc by inducing magnetic flux to define the pit direction. The first disc was developed by IBM with diameter of 25inch to store around 10 kByte. After four decades, the disc drive has become more advanced by reducing the drive size, increasing ariel density and cost reduction. The introduction of new computer operating systems and the Internet resulted in the need to develop high ariel density in the 1990s. Therefore, the disc drive manufacturers were pushed harder to develop new technologies at low cost to survive the competitive market. The disc drives, which are based on media (where the data/information is stored) and the head (which will write and read data/information). The head and disc are separated and with the current technology the spacing between the disc and head is about 40nm. A new technology based on magnetic recording was developed to serve the audio market. This technology is called magnetic type, it is similar to the disc drive, but the media is based on tape rather than rigid disc. Another difference being the head and media are in direct contact. Magnetic tape was developed for audio application and a few years later this technology was extended to allow and accept another technology, called video. This allows consumers to record and view movies in their home. The magnetic tape also used the computer industries for back up data. Magnetic tape is still used in computers and has advanced further over the past decade, companies like Quantum Corp has developed digital linear tape.

The Effects of Direction of Exertion, Path, and Load Placement in Nursing Cart Pushing and Pulling Tasks: An Electromyographical Study.

PubMed

Kao, Huei Chu; Lin, Chiuhsiang Joe; Lee, Yung Hui; Chen, Su Huang

2015-01-01

The purpose of this study was to explore the effects of direction of exertion (DOE) (pushing, pulling), path (walking in a straight line, turning left, walking uphill), and load placement (LP) (the 18 blocks were indicated by X, Y and Z axis; there were 3 levels on the X axis, 2 levels on the Y axis, and 3 levels on the Z axis) on muscle activity and ratings of perceived exertion in nursing cart pushing and pulling tasks. Ten participants who were female students and not experienced nurses were recruited to participate in the experiment. Each participant performed 108 experimental trials in the study, consisting of 2 directions of exertion (push and pull), 3 paths, and 18 load placements (indicated by X, Y and Z axes). A 23kg load was placed into one load placement. The dependent variables were electromyographic (EMG) data of four muscles collected bilaterally as follows: Left (L) and right (R) trapezius (TR), flexor digitorum superficialis (FDS), extensor digitorum (ED), and erector spinae (ES) and subjective ratings of perceived exertion (RPE). Split-split-plot ANOVA was conducted to analyze significant differences between DOE, path, and LP in the EMG and RPE data. Pulling cart tasks produced a significantly higher activation of the muscles (RTR:54.4%, LTR:50.3%, LFDS:57.0%, LED:63.4%, RES:40.7%, LES:36.7%) than pushing cart tasks (RTR:42.4%, LTR:35.1%, LFDS:32.3%, LED:55.1%, RES:33.3%, LES:32.1%). A significantly greater perceived exertion was found in pulling cart tasks than pushing cart tasks. Significantly higher activation of all muscles and perceived exertion were observed for walking uphill than walking in a straight line and turning left. Significantly lower muscle activity of all muscles and subject ratings were observed for the central position on the X axis, the bottom position on the Y axis, and the posterior position on the Z axis. These findings suggest that nursing staff should adopt forward pushing when moving a nursing cart, instead of backward pulling, and that uphill paths should be avoided in the design of work environments. In terms of distribution of the load in a nursing cart, heavier materials should be positioned at bottom of the cabinet, centered on the horizontal plane and close to the handle, to reduce the physical load of the nursing staff.

The Effects of Direction of Exertion, Path, and Load Placement in Nursing Cart Pushing and Pulling Tasks: An Electromyographical Study

PubMed Central

Kao, Huei Chu; Lin, Chiuhsiang Joe; Lee, Yung Hui; Chen, Su Huang

2015-01-01

The purpose of this study was to explore the effects of direction of exertion (DOE) (pushing, pulling), path (walking in a straight line, turning left, walking uphill), and load placement (LP) (the 18 blocks were indicated by X, Y and Z axis; there were 3 levels on the X axis, 2 levels on the Y axis, and 3 levels on the Z axis) on muscle activity and ratings of perceived exertion in nursing cart pushing and pulling tasks. Ten participants who were female students and not experienced nurses were recruited to participate in the experiment. Each participant performed 108 experimental trials in the study, consisting of 2 directions of exertion (push and pull), 3 paths, and 18 load placements (indicated by X, Y and Z axes). A 23kg load was placed into one load placement. The dependent variables were electromyographic (EMG) data of four muscles collected bilaterally as follows: Left (L) and right (R) trapezius (TR), flexor digitorum superficialis (FDS), extensor digitorum (ED), and erector spinae (ES) and subjective ratings of perceived exertion (RPE). Split-split-plot ANOVA was conducted to analyze significant differences between DOE, path, and LP in the EMG and RPE data. Pulling cart tasks produced a significantly higher activation of the muscles (RTR:54.4%, LTR:50.3%, LFDS:57.0%, LED:63.4%, RES:40.7%, LES:36.7%) than pushing cart tasks (RTR:42.4%, LTR:35.1%, LFDS:32.3%, LED:55.1%, RES:33.3%, LES:32.1%). A significantly greater perceived exertion was found in pulling cart tasks than pushing cart tasks. Significantly higher activation of all muscles and perceived exertion were observed for walking uphill than walking in a straight line and turning left. Significantly lower muscle activity of all muscles and subject ratings were observed for the central position on the X axis, the bottom position on the Y axis, and the posterior position on the Z axis. These findings suggest that nursing staff should adopt forward pushing when moving a nursing cart, instead of backward pulling, and that uphill paths should be avoided in the design of work environments. In terms of distribution of the load in a nursing cart, heavier materials should be positioned at bottom of the cabinet, centered on the horizontal plane and close to the handle, to reduce the physical load of the nursing staff. PMID:26485039

Pushing/bearing down methods for the second stage of labour.

PubMed

Lemos, Andrea; Amorim, Melania Mr; Dornelas de Andrade, Armele; de Souza, Ariani I; Cabral Filho, José Eulálio; Correia, Jailson B

2017-03-26

Maternal pushing during the second stage of labour is an important and indispensable contributor to the involuntary expulsive force developed by uterine contraction. There is no consensus on an ideal strategy to facilitate these expulsive efforts and there are contradictory results about the influence on the mother and fetus. To evaluate the benefits and possible disadvantages of different kinds of techniques regarding maternal pushing/breathing during the expulsive stage of labour on maternal and fetal outcomes. We searched Cochrane Pregnancy and Childbirth's Trials Register (19 September 2016) and reference lists of retrieved studies. Randomised controlled trials (RCTs) and quasi-RCTs assessing the effects of pushing/bearing down techniques (type and/or timing) performed during the second stage of labour on maternal and neonatal outcomes. Cluster-RCTs were eligible for inclusion, but none were identified. Studies using a cross-over design and those published in abstract form only were not eligible for inclusion in this review. Two review authors independently assessed trials for inclusion, extracted data and assessed risk of bias. Data were checked for accuracy. In this updated review, we included 21 studies in total, eight (884 women) comparing spontaneous pushing versus directed pushing, with or without epidural analgesia and 13 (2879 women) comparing delayed pushing versus immediate pushing with epidural analgesia. Our GRADE assessments of evidence ranged from moderate to very low quality; the main reasons for downgrading were study design limitations and imprecision of effect estimates. Overall, the included studies varied in their risk of bias; most were judged to be at unclear risk of bias. Comparison 1: types of pushing: spontaneous pushing versus directed pushingThere was no clear difference in the duration of the second stage of labour (mean difference (MD) 10.26 minutes; 95% confidence interval (CI) -1.12 to 21.64 minutes, six studies, 667 women, random-effects, I² = 81%) (very low-quality evidence). There was no clear difference in 3rd or 4th degree perineal laceration (risk ratio (RR) 0.87; 95% CI 0.45 to 1.66, one study, 320 women) (low-quality evidence), episiotomy (average RR 1.05; 95% CI 0.60 to 1.85, two studies, 420 women, random-effects, I² = 81%), duration of pushing (MD -9.76 minutes, 95% CI -19.54 to 0.02; two studies; 169 women; I² = 88%) (very low-quality evidence), or rate of spontaneous vaginal delivery (RR 1.01, 95% CI 0.97 to 1.05; five studies; 688 women; I² = 2%) (moderate-quality evidence). For primary neonatal outcomes such as five-minute Apgar score less than seven, there was no clear difference between groups (RR 0.35; 95% CI 0.01 to 8.43, one study, 320 infants) (very low-quality evidence), and the number of admissions to neonatal intensive care (RR 1.08; 95% CI 0.30 to 3.79, two studies, 393 infants) (very low-quality evidence) also showed no clear difference between spontaneous and directed pushing. No data were available on hypoxic ischaemic encephalopathy. Comparison 2: timing of pushing: delayed pushing versus immediate pushing (all women with epidural)For the primary maternal outcomes, delayed pushing was associated with an increase of 56 minutes in the duration of the second stage of labour (MD 56.40, 95% CI 42.05 to 70.76; 11 studies; 3049 women; I² = 91%) (very low-quality evidence), but no clear difference in third or 4th degree perineal laceration (RR 0.94; 95% CI 0.78 to 1.14, seven studies. 2775 women) (moderate-quality evidence) or episiotomy (RR 0.95; 95% CI 0.87 to 1.04, five studies, 2320 women). Delayed pushing was also associated with a 19-minute decrease in the duration of pushing (MD -19.05, 95% CI -32.27 to -5.83; 11 studies; 2932 women; I² = 95%) (very low-quality evidence) and an increase in spontaneous vaginal delivery (RR 1.07; 95% CI 1.02 to 1.11, 12 studies, 3114 women) (moderate-quality evidence).For the primary neonatal outcomes, there was no clear difference between groups in admission to neonatal intensive care (RR 0.98; 95% CI 0.67 to 1.41, three studies, n = 2197) (low-quality evidence) and five-minute Apgar score less than seven (RR 0.15; 95% CI 0.01 to 3.00; three studies; 413 infants) (very low-quality evidence). There were no data on hypoxic ischaemic encephalopathy. Delayed pushing was associated with a greater incidence of low umbilical cord blood pH (RR 2.24; 95% CI 1.37 to 3.68, 4 studies, 2145 infants) and increased the cost of intrapartum care by CDN$ 68.22 (MD 68.22, 95% CI 55.37, 81.07, one study, 1862 women). This updated review is based on 21 included studies of moderate to very low quality of evidence (with evidence mainly downgraded due to study design limitations and imprecision of effect estimates).Timing of pushing with epidural is consistent in that delayed pushing leads to a shortening of the actual time pushing and increase of spontaneous vaginal delivery at the expense of an overall longer duration of the second stage of labour and an increased risk of a low umbilical cord pH (based only on one study). Nevertheless, there was no clear difference in serious perineal laceration and episiotomy, and in other neonatal outcomes (admission to neonatal intensive care, five-minute Apgar score less than seven and delivery room resuscitation) between delayed and immediate pushing.Therefore, for the type of pushing, with or without epidural, there is no conclusive evidence to support or refute any specific style as part of routine clinical practice, and in the absence of strong evidence supporting a specific method or timing of pushing, the woman's preference and comfort and clinical context should guide decisions.Further properly well-designed RCTs, addressing clinically important maternal and neonatal outcomes are required to add evidence-based information to the current knowledge. Such trials will provide more complete data to be incorporated into a future update of this review.

Creating an Intentional Web Presence: Strategies for Every Educational Technology Professional

ERIC Educational Resources Information Center

Lowenthal, Patrick R.; Dunlap, Joanna C.; Stitson, Patricia

2016-01-01

Educators are pushing for students, specifically graduates, to be digitally literate in order to successfully read, write, contribute, and ultimately compete in the global market place. Educational technology professionals, as a unique type of learning professional, need to be not only digitally literate--leading and assisting teachers and…

The Road to 24/7

ERIC Educational Resources Information Center

Briggs, Linda L.

2006-01-01

Wireless and mobile technologies are now everywhere, and 24/7 computing is as pervasive a term as the actual capability promises to be. Sometimes, in fact, the push toward mobile technologies can seem overwhelming. But every wireless project doesn't have to involve redesigning the network and investing in mega-dollars worth of hardware and…

Sub-orbital Programs and their Influence upon Space Missions

NASA Technical Reports Server (NTRS)

Mather, John C.

2009-01-01

Sub-orbital programs can push science to new limits by deploying the very latest in instrument concepts and technologies. Many space missions have sprung from sub-orbital programs, scientifically, technologically, and personally. I will illustrate the sub-orbital potential with examples from cosmology, interferometry, high-energy astrophysics, and others foreseen in NASA roadmaps.

Understanding Imaging and Metrology with the Helium Ion Microscope

NASA Astrophysics Data System (ADS)

Postek, Michael T.; Vladár, András E.; Ming, Bin

2009-09-01

One barrier to innovation confronting all phases of nanotechnology is the lack of accurate metrology for the characterization of nanomaterials. Ultra-high resolution microscopy is a key technology needed to achieve this goal. But, current microscope technology is being pushed to its limits. The scanning and transmission electron microscopes have incrementally improved in performance and other scanned probe technologies such as atomic force microscopy, scanning tunneling microscopy and focused ion beam microscopes have all been applied to nanotechnology with various levels of success. A relatively new tool for nanotechnology is the scanning helium ion microscope (HIM). The HIM is a new complementary imaging and metrology technology for nanotechnology which may be able to push the current resolution barrier lower. But, successful imaging and metrology with this instrument entails new ion beam/specimen interaction physics which must be fully understood. As a new methodology, HIM is beginning to show promise and the abundance of potentially advantageous applications for nanotechnology have yet to be fully exploited. This presentation will discuss some of the progress made at NIST in understanding the science behind this new technique.

Commissioning and performance results of the WFIRST/PISCES integral field spectrograph

NASA Astrophysics Data System (ADS)

Saxena, Prabal; Rizzo, Maxime J.; Mejia Prada, Camilo; Llop Sayson, Jorge; Gong, Qian; Cady, Eric J.; Mandell, Avi M.; Groff, Tyler D.; McElwain, Michael W.

2017-09-01

Direct imaging of exoplanets has become a priority in the field of exoplanet discovery and characterization due to its ability to directly obtain evidence about a planet's atmosphere and some bulk properties. Features such as atmospheric composition, structure and clouds are just some of the planetary properties obtainable from directly imaged spectra. However, detecting and observing spectra of exoplanets using direct imaging is challenging due to the combination of extreme star to planet contrast ratios and the relatively small apparent physical separation between a host star and an orbiting planet. Detection of Earth-sized planets in reflected visible light requires contrast ratios of 1010, while even detection of Jupiter-sized planets and large young self-luminous planets requires contrast ratios of 108 and 106, respectively. Consequently, direct detection of exoplanets requires observing strategies which push the boundaries of high contrast imaging. The use of coronagraphy to occult a host star has been combined with adaptive optics (AO) technology to yield a particularly promising means of potentially achieving the required contrast ratios in regions close-in enough to the host star. Ground based adaptive optics systems such as The Gemini Planet Imager (GPI)1 and Spectro-Polarimetric High-contrast Exoplanet REsearch (SPHERE)2 instrument have been able to achieve contrast ratios nearing 107 using post-processing techniques3, 4 and have yielded a number of direct detections of young self-luminous planets. Advancing these technologies onto a space based platform immune to the difficulties posed by the effects of Earth's atmosphere is the next step in accessing even larger contrast ratios.

The next 25 years: Industrialization of space - Rationale for planning

NASA Technical Reports Server (NTRS)

Von Puttkamer, J.

1977-01-01

A methodology for planning the industralization of space is discussed. The suggested approach combines the extrapolative ('push') approach, in which alternative futures are projected on the basis of past and current trends and tendencies, with the normative ('pull') view, in which an ideal state in the far future is postulated and policies and decisions are directed toward its attainment. Time-reversed vectors of the future are tied to extrapolated, trend-oriented vectors of the quasi-present to identify common plateaus or stepping stones in technological development. Important steps in the industrialization of space to attain the short-range goals of production of space-derived energy, goods and services and the long-range goal of space colonization are discussed.

Clinical social networking--a new revolution in provider communication and delivery of clinical information across providers of care?

PubMed

Kolowitz, Brian J; Lauro, Gonzalo Romero; Venturella, James; Georgiev, Veliyan; Barone, Michael; Deible, Christopher; Shrestha, Rasu

2014-04-01

The adoption of social media technologies appears to enhance clinical outcomes through improved communications as reported by Bacigalupe (Fam Syst Heal 29(1):1-14, 2011). The ability of providers to more effectively, directly, and rapidly communicate among themselves as well as with patients should strengthen collaboration and treatment as reported by Bacigalupe (Fam Syst Heal 29(1):1-14, 2011). This paper is a case study in one organization's development of an internally designed and developed social technology solution termed "Unite." The Unite system combines social technologies' features including push notifications, messaging, community groups, and user lists with clinical workflow and applications to construct dynamic provider networks, simplify communications, and facilitate clinical workflow optimization. Modeling Unite as a social technology may ease adoption barriers. Developing a social network that is integrated with healthcare information systems in the clinical space opens the doors to capturing and studying the way in which providers communicate. The Unite system appears to have the potential to breaking down existing communication paradigms. With Unite, a rich set of usage data tied to clinical events may unravel alternative networks that can be leveraged to advance patient care.

Midwives' verbal support of nulliparous women in second-stage labor.

PubMed

Borders, Noelle; Wendland, Claire; Haozous, Emily; Leeman, Lawrence; Rogers, Rebecca

2013-01-01

To describe how nurse-midwives verbally support nulliparous women during second-stage labor and document specific details of each second stage. Descriptive qualitative study. A university hospital labor and delivery unit in the southwestern United States. Nulliparous women (n = 14) older than age 18 and their attendant midwives (n = 9). A single research midwife observed the entire second stage of each woman and used a standardized data collection form to record spontaneous or directed pushing, position changes, open and closed glottis pushing. A digital audio recorder was employed to capture verbal communication between the midwife and laboring woman. The research midwife and two qualitative experts employed content analysis to analyze the audio transcripts and identify categories of verbal support. Analysis revealed four categories of verbal support: affirmation, information sharing, direction, and baby talk. The vast majority of verbal communication by nurse-midwives consisted of affirmation and information sharing. Nurse-midwives gave direction for specific reasons. Women pushed spontaneously the majority of the time, regardless of epidural use. Nurse-midwives use a range of verbal support strategies to guide the second stage. Directive support was relatively uncommon. Most verbal support instead affirmed a woman's ability to follow her own body's lead in second-stage labor, with or without epidural. © 2013 AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses.

CGH Future Directions

Cancer.gov

Looking ahead, we have three major future directions that we believe will help us push forward in achieving NCI’s goal of advancing global cancer research, building expertise, and leveraging resources across nations to address the challenges of cancer and reduce cancer deaths worldwide.

Prototype pushing robot for emplacing vitrified waste canisters into horizontal disposal drifts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Londe, L.; Seidler, W.K.; Bosgiraud, J.M.

2007-07-01

Within the French Underground Disposal concept, as described in ANDRA's (Agence Nationale pour la Gestion des Dechets Radioactifs) Dossier 2005, the Pushing Robot is an application envisaged for the emplacement (and the potential retrieval) of 'Vitrified waste packages', also called 'C type packages'. ANDRA has developed a Prototype Pushing Robot within the framework of the ESDRED Project (Engineering Studies and Demonstration of Repository Design) which is co-funded by the European Commission as part of the sixth EURATOM Research and Training Framework Programme (FP6) on nuclear energy (2002 - 2006). The Rationale of the Pushing Robot technology comes from various considerations,more » including the need for (1) a simple and robust system, capable of moving (and potentially retrieving) on up to 40 metres (m), a 2 tonne C type package (mounted on ceramic sliding runners) inside the carbon steel sleeve constituting the liner (and rock support) of a horizontal disposal cell, (2) small annular clearances between the package and the liner, (3) compactness of the device to be transferred from surface to underground, jointly with the package, inside a shielding cask, and (4) remote controlled operations for the sake of radioprotection. The initial design, based on gripping supports, has been replaced by a 'technical variant' based on inflatable toric jacks. It was then possible, using a test bench, to check that the Pushing Robot worked properly. Steps as high as 7 mm were successfully cleared by a dummy package pushed by the Prototype.. Based on the lessons learned by ANDRA's regarding the Prototype Pushing Robot, a new Scope of Work is being written for the Contract concerning an Industrial Scale Demonstrator. The Industrial Scale Demonstration should be completed by the end of the second Quarter of 2008. (authors)« less

Airframe Technology Development for Next Generation Launch Vehicles

NASA Technical Reports Server (NTRS)

Glass, David E.

2004-01-01

The Airframe subproject within NASA's Next Generation Launch Technology (NGLT) program has the responsibility to develop airframe technology for both rocket and airbreathing vehicles for access to space. The Airframe sub-project pushes the state-of-the-art in airframe technology for low-cost, reliable, and safe space transportation. Both low and medium technology readiness level (TRL) activities are being pursued. The key technical areas being addressed include design and integration, hot and integrated structures, cryogenic tanks, and thermal protection systems. Each of the technologies in these areas are discussed in this paper.

Introduction to CERN

ScienceCinema

Heuer, R.-D.

2018-02-19

Summer Student Lecture Programme Introduction. The mission of CERN; push back the frontiers of knowledge, e.g. the secrets of the Big Bang...what was the matter like within the first moments of the Universe's existence? You have to develop new technologies for accelerators and detectors (also information technology--the Web and the GRID and medicine--diagnosis and therapy). There are three key technology areas at CERN; accelerating, particle detection, large-scale computing.

The Effects of Pushing the Digital Divide to the Fighting Hole

DTIC Science & Technology

2006-02-03

information technologies (IT), and new ways of horizontally fusing information across the battlespace...The opportunity to exploit this new “digital...brought technology , such as the Internet Protocol (IP), to the forefront. It is incumbent upon the leaders of the communications community to ensure...in a recent interview with SIGNAL magazine: In terms of potential, I see the fundamental technologies associated with Internet Protocol (IP

Advanced Liquid-Free, Piezoresistive, SOI-Based Pressure Sensors for Measurements in Harsh Environments

PubMed Central

Ngo, Ha-Duong; Mukhopadhyay, Biswaijit; Ehrmann, Oswin; Lang, Klaus-Dieter

2015-01-01

In this paper we present and discuss two innovative liquid-free SOI sensors for pressure measurements in harsh environments. The sensors are capable of measuring pressures at high temperatures. In both concepts media separation is realized using a steel membrane. The two concepts represent two different strategies for packaging of devices for use in harsh environments and at high temperatures. The first one is a “one-sensor-one-packaging_technology” concept. The second one uses a standard flip-chip bonding technique. The first sensor is a “floating-concept”, capable of measuring pressures at temperatures up to 400 °C (constant load) with an accuracy of 0.25% Full Scale Output (FSO). A push rod (mounted onto the steel membrane) transfers the applied pressure directly to the center-boss membrane of the SOI-chip, which is placed on a ceramic carrier. The chip membrane is realized by Deep Reactive Ion Etching (DRIE or Bosch Process). A novel propertied chip housing employing a sliding sensor chip that is fixed during packaging by mechanical preloading via the push rod is used, thereby avoiding chip movement, and ensuring optimal push rod load transmission. The second sensor can be used up to 350 °C. The SOI chips consists of a beam with an integrated centre-boss with was realized using KOH structuring and DRIE. The SOI chip is not “floating” but bonded by using flip-chip technology. The fabricated SOI sensor chip has a bridge resistance of 3250 Ω. The realized sensor chip has a sensitivity of 18 mV/µm measured using a bridge current of 1 mA. PMID:26295235

SPRUCE S1 Bog Peat Depth Determined by Push Probe and GPR: 2009-2010

DOE Data Explorer

Slater, L. [Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.; Hanson, P. J. [Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.; Hook, L. A. [Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.

2012-01-01

This data set reports the thickness of peat for the S1 Bog measured directly with manual push probes on September 21 and 22, 2009, and measured by ground penetrating radar (GPR) across transects from January 26 to February 2, 2010 and June 2 to June 9, 2010. Also included are interpolated values of peat depth from both probe and GPR data for the S1 Bog at 1 meter square horizontal resolution.

Effect of ultrasonic agitation on push-out bond strength and adaptation of root-end filling materials

PubMed Central

2018-01-01

Objectives This study evaluated the effect of ultrasonic agitation of mineral trioxide aggregate (MTA), calcium silicate-based cement (CSC), and Sealer 26 (S26) on adaptation at the cement/dentin interface and push-out bond strength. Materials and Methods Sixty maxillary canines were divided into 6 groups (n = 10): MTA, S26, and CSC, with or without ultrasonic activation (US). After obturation, the apical portions of the teeth were sectioned, and retrograde cavities were prepared and filled with cement by hand condensation. In the US groups, the cement was activated for 60 seconds: 30 seconds in the mesio-distal direction and 30 seconds in the buccal-lingual direction, using a mini Irrisonic insert coupled with the ultrasound transducer. After the materials set, 1.5-mm thick sections were obtained from the apexes. The presence of gaps and the bond between cement and dentin were analyzed using low-vacuum scanning electron microscopy. Push-out bond strength was measured using a universal testing machine. Results Ultrasonic agitation increased the interfacial adaptation of the cements. The S26 US group showed a higher adaptation value than MTA (p < 0.05). US improved the push-out bond strength for all the cements (p < 0.05). Conclusions The US of retrograde filling cements enhanced the bond to the dentin wall of the root-end filling materials tested. PMID:29765903

Effect of ultrasonic agitation on push-out bond strength and adaptation of root-end filling materials.

PubMed

Alcalde, Murilo Priori; Vivan, Rodrigo Ricci; Marciano, Marina Angélica; Duque, Jussaro Alves; Fernandes, Samuel Lucas; Rosseto, Mariana Bailo; Duarte, Marco Antonio Hungaro

2018-05-01

This study evaluated the effect of ultrasonic agitation of mineral trioxide aggregate (MTA), calcium silicate-based cement (CSC), and Sealer 26 (S26) on adaptation at the cement/dentin interface and push-out bond strength. Sixty maxillary canines were divided into 6 groups ( n = 10): MTA, S26, and CSC, with or without ultrasonic activation (US). After obturation, the apical portions of the teeth were sectioned, and retrograde cavities were prepared and filled with cement by hand condensation. In the US groups, the cement was activated for 60 seconds: 30 seconds in the mesio-distal direction and 30 seconds in the buccal-lingual direction, using a mini Irrisonic insert coupled with the ultrasound transducer. After the materials set, 1.5-mm thick sections were obtained from the apexes. The presence of gaps and the bond between cement and dentin were analyzed using low-vacuum scanning electron microscopy. Push-out bond strength was measured using a universal testing machine. Ultrasonic agitation increased the interfacial adaptation of the cements. The S26 US group showed a higher adaptation value than MTA ( p < 0.05). US improved the push-out bond strength for all the cements ( p < 0.05). The US of retrograde filling cements enhanced the bond to the dentin wall of the root-end filling materials tested.

Challenges in translational research: the views of addiction scientists.

PubMed

Ostergren, Jenny E; Hammer, Rachel R; Dingel, Molly J; Koenig, Barbara A; McCormick, Jennifer B

2014-01-01

To explore scientists' perspectives on the challenges and pressures of translating research findings into clinical practice and public health policy. We conducted semi-structured interviews with a purposive sample of 20 leading scientists engaged in genetic research on addiction. We asked participants for their views on how their own research translates, how genetic research addresses addiction as a public health problem and how it may affect the public's view of addiction. Most scientists described a direct translational route for their research, positing that their research will have significant societal benefits, leading to advances in treatment and novel prevention strategies. However, scientists also pointed to the inherent pressures they feel to quickly translate their research findings into actual clinical or public health use. They stressed the importance of allowing the scientific process to play out, voicing ambivalence about the recent push to speed translation. High expectations have been raised that biomedical science will lead to new prevention and treatment modalities, exerting pressure on scientists. Our data suggest that scientists feel caught in the push for immediate applications. This overemphasis on rapid translation can lead to technologies and applications being rushed into use without critical evaluation of ethical, policy, and social implications, and without balancing their value compared to public health policies and interventions currently in place.

Increased Tensile Strength of Carbon Nanotube Yarns and Sheets through Chemical Modification and Electron Beam Irradiation

NASA Technical Reports Server (NTRS)

Miller, Sandi G.; Williams, Tiffany S.; Baker, James S.; Sola, Francisco; Lebron-Colon, Marisabel; McCorkle, Linda S.; Wilmoth, Nathan G.; Gaier, James; Chen, Michelle; Meador, Michael A.

2014-01-01

The inherent strength of individual carbon nanotubes offers considerable opportunity for the development of advanced, lightweight composite structures. Recent work in the fabrication and application of carbon nanotube (CNT) forms such as yarns and sheets has addressed early nanocomposite limitations with respect to nanotube dispersion and loading; and has pushed the technology toward structural composite applications. However, the high tensile strength of an individual CNT has not directly translated to macro-scale CNT forms where bulk material strength is limited by inter-tube electrostatic attraction and slippage. The focus of this work was to assess post processing of CNT sheet and yarn to improve the macro-scale strength of these material forms. Both small molecule functionalization and e-beam irradiation was evaluated as a means to enhance tensile strength and Youngs modulus of the bulk CNT material. Mechanical testing results revealed a tensile strength increase in CNT sheets by 57 when functionalized, while an additional 48 increase in tensile strength was observed when functionalized sheets were irradiated; compared to unfunctionalized sheets. Similarly, small molecule functionalization increased yarn tensile strength up to 25, whereas irradiation of the functionalized yarns pushed the tensile strength to 88 beyond that of the baseline yarn.

Equations with Technology: Different Tools, Different Views

ERIC Educational Resources Information Center

Drijvers, Paul; Barzel, Barbel

2012-01-01

Has technology revolutionised the mathematics classroom, or is it still a device waiting to be exploited for the benefit of the learner? There are applets that will enable the user to solve complex equations at the push of a button. So, does this jeopardise other methods, make other methods redundant, or even diminish other methods in the mind of…

Pushing the Limits: Making Dance Accessible to Different Bodies through Assistive Technology

ERIC Educational Resources Information Center

Morris, Merry Lynn

2015-01-01

In this article, I draw critical attention to the assistive mobility devices that individuals who are differently bodied often use in dance and suggest that the dance genre presents the opportunity for reimagining the technological possibilities of these devices and creating more diverse repertoires. As an intervention and example, I describe the…

On-sky AO test bench

NASA Astrophysics Data System (ADS)

Brousseau, Denis; Thibault, Simon; Lavigne, Jean-François; Véran, Jean-Pierre

2016-07-01

With the upcoming construction of ELTs, several existing technologies are being pushed beyond their performance limit and it became essential to develop and evaluate alternatives. We present a specifically designed focal plane box which will allow to evaluate, directly on-sky, the performance of a number of next generation adaptive optics related technologies The system will able us to compare the performance of several new wavefront sensors in contrast to a Shack-Hartman wavefront sensor. The system has been designed for the "Observatoire du Mont Mégantic" (OMM) which hosts a telescope having a 1.6-meter diameter primary. The OMM telescope, located halfway between Montreal and Quebec City, is known to be an excellent location to develop and test precursor instruments which can then be upscaled to larger telescopes (ex. SPIOMM which led to SITELLE at the CFHT). We present the results of the first run made at the telescope and also identify problems that were encountered. We also propose a series of modifications to the system that will help to solve these issues.

The Bright, Artificial Intelligence-Augmented Future of Neuroimaging Reading.

PubMed

Hainc, Nicolin; Federau, Christian; Stieltjes, Bram; Blatow, Maria; Bink, Andrea; Stippich, Christoph

2017-01-01

Radiologists are among the first physicians to be directly affected by advances in computer technology. Computers are already capable of analyzing medical imaging data, and with decades worth of digital information available for training, will an artificial intelligence (AI) one day signal the end of the human radiologist? With the ever increasing work load combined with the looming doctor shortage, radiologists will be pushed far beyond their current estimated 3 s allotted time-of-analysis per image; an AI with super-human capabilities might seem like a logical replacement. We feel, however, that AI will lead to an augmentation rather than a replacement of the radiologist. The AI will be relied upon to handle the tedious, time-consuming tasks of detecting and segmenting outliers while possibly generating new, unanticipated results that can then be used as sources of medical discovery. This will affect not only radiologists but all physicians and also researchers dealing with medical imaging. Therefore, we must embrace future technology and collaborate interdisciplinary to spearhead the next revolution in medicine.

Inconsistent classification of pusher behaviour in stroke patients: a direct comparison of the Scale for Contraversive Pushing and the Burke Lateropulsion Scale.

PubMed

Bergmann, Jeannine; Krewer, Carmen; Rieß, Katrin; Müller, Friedemann; Koenig, Eberhard; Jahn, Klaus

2014-07-01

To compare the classification of two clinical scales for assessing pusher behaviour in a cohort of stroke patients. Observational case-control study. Inpatient stroke rehabilitation unit. A sample of 23 patients with hemiparesis due to a unilateral stroke (1.6 ± 0.7 months post stroke). Immediately before and after three different interventions, the Scale for Contraversive Pushing and the Burke Lateropulsion Scale were applied in a standardized procedure. The diagnosis of pusher behaviour on the basis of the Scale for Contraversive Pushing and the Burke Lateropulsion Scale differed significantly (χ2 = 54.260, p < 0.001) resulting in inconsistent classifications in 31 of 138 cases. Changes immediately after the interventions were more often detected by the Burke Lateropulsion Scales than by the Scale for Contraversive Pushing (χ2 = 19.148, p < 0.001). All cases with inconsistent classifications showed no pusher behaviour on the Scale for Contraversive Pushing, but pusher behaviour on the Burke Lateropulsion Scale. 64.5% (20 of 31) of them scored on the Burke Lateropulsion Scale on the standing and walking items only. The Burke Lateropulsion Scale is an appropriate alternative to the widely used Scale for Contraversive Pushing to follow-up patients with pusher behaviour (PB); it might be more sensitive to detect mild pusher behaviour in standing and walking. © The Author(s) 2014.

Synthesizing a novel genetic sequential logic circuit: a push-on push-off switch

PubMed Central

Lou, Chunbo; Liu, Xili; Ni, Ming; Huang, Yiqi; Huang, Qiushi; Huang, Longwen; Jiang, Lingli; Lu, Dan; Wang, Mingcong; Liu, Chang; Chen, Daizhuo; Chen, Chongyi; Chen, Xiaoyue; Yang, Le; Ma, Haisu; Chen, Jianguo; Ouyang, Qi

2010-01-01

Design and synthesis of basic functional circuits are the fundamental tasks of synthetic biologists. Before it is possible to engineer higher-order genetic networks that can perform complex functions, a toolkit of basic devices must be developed. Among those devices, sequential logic circuits are expected to be the foundation of the genetic information-processing systems. In this study, we report the design and construction of a genetic sequential logic circuit in Escherichia coli. It can generate different outputs in response to the same input signal on the basis of its internal state, and ‘memorize' the output. The circuit is composed of two parts: (1) a bistable switch memory module and (2) a double-repressed promoter NOR gate module. The two modules were individually rationally designed, and they were coupled together by fine-tuning the interconnecting parts through directed evolution. After fine-tuning, the circuit could be repeatedly, alternatively triggered by the same input signal; it functions as a push-on push-off switch. PMID:20212522

Synthesizing a novel genetic sequential logic circuit: a push-on push-off switch.

PubMed

Lou, Chunbo; Liu, Xili; Ni, Ming; Huang, Yiqi; Huang, Qiushi; Huang, Longwen; Jiang, Lingli; Lu, Dan; Wang, Mingcong; Liu, Chang; Chen, Daizhuo; Chen, Chongyi; Chen, Xiaoyue; Yang, Le; Ma, Haisu; Chen, Jianguo; Ouyang, Qi

2010-01-01

Design and synthesis of basic functional circuits are the fundamental tasks of synthetic biologists. Before it is possible to engineer higher-order genetic networks that can perform complex functions, a toolkit of basic devices must be developed. Among those devices, sequential logic circuits are expected to be the foundation of the genetic information-processing systems. In this study, we report the design and construction of a genetic sequential logic circuit in Escherichia coli. It can generate different outputs in response to the same input signal on the basis of its internal state, and 'memorize' the output. The circuit is composed of two parts: (1) a bistable switch memory module and (2) a double-repressed promoter NOR gate module. The two modules were individually rationally designed, and they were coupled together by fine-tuning the interconnecting parts through directed evolution. After fine-tuning, the circuit could be repeatedly, alternatively triggered by the same input signal; it functions as a push-on push-off switch.

X-34 Poster Art

NASA Technical Reports Server (NTRS)

2004-01-01

Pictured is NASA's poster art for the X-34 technology Demonstrator. The X-34 was part of NASA's Pathfinder Program which demonstrated advanced space transportation technologies through the use of flight experiments and experimental vehicles. These technology demonstrators and flight experiments would support the Agency's goal of dramatically reducing the cost of access to space and would define the future of space transportation pushing technology into a new era of space development and exploration at the dawn of the new century. The X-34 program was cancelled in 2001.

Pathfinder

NASA Image and Video Library

2004-04-15

Pictured is NASA's poster art for the X-34 technology Demonstrator. The X-34 was part of NASA's Pathfinder Program which demonstrated advanced space transportation technologies through the use of flight experiments and experimental vehicles. These technology demonstrators and flight experiments would support the Agency's goal of dramatically reducing the cost of access to space and would define the future of space transportation pushing technology into a new era of space development and exploration at the dawn of the new century. The X-34 program was cancelled in 2001.

Pathfinder

NASA Image and Video Library

2004-04-15

Pictured in the high bay, is the X-34 Technology Demonstrator in the process of completion. The X-34 wass part of NASA's Pathfinder Program which demonstrated advanced space transportation technologies through the use of flight experiments and experimental vehicles. These technology demonstrators and flight experiments supported the Agency's goal of dramatically reducing the cost of access to space and defined the future of space transportation pushing technology into a new era of space development and exploration at the dawn of the new century. The X-34 program was cancelled in 2001.

Introducing Current Technologies

NASA Technical Reports Server (NTRS)

Mitchell, Tiffany

1995-01-01

The objective of the study was a continuation of the 'technology push' activities that the Technology Transfer Team conducts at this time. It was my responsibility to research current technologies at Langley Research Center and find a commercial market for these technologies in the private industry. After locating a market for the technologies, a mailing package was put together which informed the companies of the benefits of NASA Langley's technologies. The mailing package included articles written about the technology, patent material, abstracts from technical papers, and one-pagers which were used at the Technology Opportunities Showcase (TOPS) exhibitions. The companies were encouraged to consult key team members for further information on the technologies.

A small-diameter NMR logging tool for groundwater investigations

USGS Publications Warehouse

Walsh, David; Turner, Peter; Grunewald, Elliot; Zhang, Hong; Butler, James J.; Reboulet, Ed; Knobbe, Steve; Christy, Tom; Lane, John W.; Johnson, Carole D.; Munday, Tim; Fitzpatrick, Andrew

2013-01-01

A small-diameter nuclear magnetic resonance (NMR) logging tool has been developed and field tested at various sites in the United States and Australia. A novel design approach has produced relatively inexpensive, small-diameter probes that can be run in open or PVC-cased boreholes as small as 2 inches in diameter. The complete system, including surface electronics and various downhole probes, has been successfully tested in small-diameter monitoring wells in a range of hydrogeological settings. A variant of the probe that can be deployed by a direct-push machine has also been developed and tested in the field. The new NMR logging tool provides reliable, direct, and high-resolution information that is of importance for groundwater studies. Specifically, the technology provides direct measurement of total water content (total porosity in the saturated zone or moisture content in the unsaturated zone), and estimates of relative pore-size distribution (bound vs. mobile water content) and hydraulic conductivity. The NMR measurements show good agreement with ancillary data from lithologic logs, geophysical logs, and hydrogeologic measurements, and provide valuable information for groundwater investigations.

X-34 Technology Demonstrator in High Bay

NASA Technical Reports Server (NTRS)

2004-01-01

Pictured in the high bay, is the X-34 Technology Demonstrator in the process of completion. The X-34 wass part of NASA's Pathfinder Program which demonstrated advanced space transportation technologies through the use of flight experiments and experimental vehicles. These technology demonstrators and flight experiments supported the Agency's goal of dramatically reducing the cost of access to space and defined the future of space transportation pushing technology into a new era of space development and exploration at the dawn of the new century. The X-34 program was cancelled in 2001.

INTERSESSION RELIABILITY OF UPPER EXTREMITY ISOKINETIC PUSH-PULL TESTING.

PubMed

Riemann, Bryan L; Davis, Sarah E; Huet, Kevin; Davies, George J

2016-02-01

Based on the frequency pushing and pulling patterns are used in functional activities, there is a need to establish an objective method of quantifying the muscle performance characteristics associated with these motions, particularly during the later stages of rehabilitation as criteria for discharge. While isokinetic assessment offers an approach to quantifying muscle performance, little is known about closed kinetic chain (CKC) isokinetic testing of the upper extremity (UE). To determine the intersession reliability of isokinetic upper extremity measurement of pushing and pulling peak force and average power at slow (0.24 m/s), medium (0.43 m/s) and fast (0.61 m/s) velocities in healthy young adults. The secondary purpose was to compare pushing and pulling peak force (PF) and average power (AP) between the upper extremity limbs (dominant, non-dominant) across the three velocities. Twenty-four physically active men and women completed a test-retest (>96 hours) protocol in order to establish isokinetic UE CKC reliability of PF and AP during five maximal push and pull repetitions at three velocities. Both limb and speed orders were randomized between subjects. High test-retest relative reliability using intraclass correlation coefficients (ICC2, 1) were revealed for PF (.91-.97) and AP (.85-.95) across velocities, limbs and directions. PF typical error (% coefficient of variation) ranged from 6.1% to 11.3% while AP ranged from 9.9% to 26.7%. PF decreased significantly (p < .05) as velocity increased whereas AP increased as velocity increased. PF and AP during pushing were significantly greater than pulling at all velocities, however the push-pull differences in PF became less as velocity increased. There were no significant differences identified between the dominant and nondominant limbs. Isokinetically derived UE CKC push-pull PF and AP are reliable measures. The lack of limb differences in healthy normal participants suggests that clinicians can consider bilateral comparisons when interpreting test performance. The increase in pushing PF and AP compared to pulling can be attributed to the muscles involved and the frequency that pushing patterns are used during functional activities. 3.

Responsible, Inclusive Innovation and the Nano-Divide.

PubMed

Schroeder, Doris; Dalton-Brown, Sally; Schrempf, Benjamin; Kaplan, David

Policy makers from around the world are trying to emulate successful innovation systems in order to support economic growth. At the same time, innovation governance systems are being put in place to ensure a better integration of stakeholder views into the research and development process. In Europe, one of the most prominent and newly emerging governance frameworks is called Responsible Research and Innovation (RRI). This article aims to substantiate the following points: (1) The concept of RRI and the concept of justice can be used to derive similar ethical positions on the nano-divide. (2) Given the ambitious policy aims of RRI (e.g. economic competitiveness enhancer), the concept may be better suited to push for ethical outcomes on access to nanotechnology and its products rather than debates based on justice issues alone. It may thus serve as a mediator concept between those who push solely for competitiveness considerations and those who push solely for justice considerations in nano-technology debates. (3) The descriptive, non-normative Systems of Innovation approaches (see below) should be linked into RRI debates to provide more evidence on whether the approach advocated to achieve responsible and ethical governance of research and innovation (R&I) can indeed deliver on competitiveness (in nano-technology and other fields).

Environmental Remediation Technologies Derived from Space Industry Research

NASA Technical Reports Server (NTRS)

Quinn, Jacqueline; Sauser, Brian; Helminger, Andrew

2004-01-01

Beginning in the 1950s and 1960s, an abundance of effort and initiative was focused on propelling the space industry outward for planetary exploration and habitation. During these early years, the push to take space science to new levels indirectly contributed to the evolution of another science field that would not fully surface until the early 1980s, environmental remediation. This field is associated with the remediation or cleanup of environmental resources such as groundwater, soil, and sediment. Because the space-exploration initiative began prior to the establishment of the U.S. Environmental Protection Agency (EPA) in December of 1970, many NASA Centers as well as space-related support contractors allowed for the release of spent chemicals into the environment. Subsequently, these land owners have been directed by the EPA to responsibly initiate cleanup of their impacted sites. This paper will focus on the processes and lessons learned with the development, testing, and commercialization initiatives associated with four remediation technologies. The technologies include installation techniques for permeable reactive barriers (PRBs), the use of ultrasound to improve long-term performance of PRBs, emulsified zero-valent iron for product-level solvent degradation, and emulsion technologies for application to metal and polychlorinated biphenyl contaminated media. Details of the paper cover technology research, evaluation, and testing; contracts and grants; and technology transfer strategies including patenting, marketing, and licensing.

Client-Server Connection Status Monitoring Using Ajax Push Technology

NASA Technical Reports Server (NTRS)

Lamongie, Julien R.

2008-01-01

This paper describes how simple client-server connection status monitoring can be implemented using Ajax (Asynchronous JavaScript and XML), JSF (Java Server Faces) and ICEfaces technologies. This functionality is required for NASA LCS (Launch Control System) displays used in the firing room for the Constellation project. Two separate implementations based on two distinct approaches are detailed and analyzed.

United States Air Force Civil Engineering Additive Manufacturing Applications: Tools and Jigs

DTIC Science & Technology

designs for printing applications. The overall results push forward the Air Forces 3D printing knowledge while providing critical information for decision makers on this up and coming technology....the results indicate that 3Dscanning technology will reach a point within the next 5 years where it can help foster the rapid build-up of 3D CE asset

Emerging technology for astronomical optics metrology

NASA Astrophysics Data System (ADS)

Trumper, Isaac; Jannuzi, Buell T.; Kim, Dae Wook

2018-05-01

Next generation astronomical optics will enable science discoveries across all fields and impact the way we perceive the Universe in which we live. To build these systems, optical metrology tools have been developed that push the boundary of what is possible. We present a summary of a few key metrology technologies that we believe are critical for the coming generation of optical surfaces.

An Analysis of the Relationship between Information and Communication Technology (ICT) and Scientific Literacy in Canada and Australia

ERIC Educational Resources Information Center

Luu, King; Freeman, John G.

2011-01-01

Despite the lack of substantial evidence for improvement in the quality of teaching and learning with information and communication technology (ICT), governmental organizations have pushed ICT as a means of providing broad-scale training to meet the demand for a skilled workforce, centred upon a hypothesized ICT-scientific literacy relationship.…

Learning for the Next Generation: Predicting the Usage of Synthetic Learning Environments

ERIC Educational Resources Information Center

Evans, Arthur William, III

2010-01-01

The push to further the use of technology in learning has broadened the attempts of many to find innovated ways to aid the new, technologically savvy generation of learners, in acquiring the knowledge needed for their education and training. A critical component to the success of these initiatives is the proper application of the "science of…

Why good ideas and good science do not always make it into the marketplace

Treesearch

Charles R. Frihart

2007-01-01

Good ideas and good science are not sufficient in and of themselves for successful commercialization of new technology. Understanding the barriers to commercialization so that ways around, under, over, or through them can be found is also crucial to success. Barriers can include market needs, technology push versus market pull, availability of a window of opportunity,...

APS SCIENCE 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fenner, Richard B.

The Advanced Photon Source (APS) occupies an 80-acre site on the Argonne national laboratory campus, about 25 miles from downtown chicago, illinois. it shares the site with the center for nanoscale materials and the Advanced Protein characterization facility. for directions to Argonne, see http://www.anl.gov/directions-and-visitor-information. The APS, a national synchrotron radiation research facility operated by Argonne for the u.S. department of energy (doe) office of Science, provides this nation’s brightest high-energy x-ray beams for science. research by APS users extends from the center of the earth to outer space, from new information on combustion engines and microcircuits to new drugs andmore » nanotechnologies whose scale is measured in billionths of a meter. The APS helps researchers illuminate answers to the challenges of our high-tech world, from developing new forms of energy, to sustaining our nation’s technological and economic competitiveness, to pushing back against the ravages of disease. research at the APS promises to have far-reaching« less

Applying next-generation DNA sequencing technology to aquatic bioassessment

EPA Science Inventory

The growing challenges for environmental monitoring and assessment have pushed standard techniques to the limits of their application. Current biological monitoring programs often require considerable time and workload to provide environmental condition assessments. New molecular...

ESA Technologies for Space Debris Remediation

NASA Astrophysics Data System (ADS)

Wormnes, K.; Le Letty, R.; Summerer, L.; Schonenborg, R.; Dubois-Matra, O.; Luraschi, E.; Cropp, A.; Krag, H.; Delaval, J.

2013-08-01

Space debris is an existing and growing problem for space operations. Studies show that for a continued use of LEO, 5 - 10 large and strategically chosen debris need to be removed every year. The European Space Agency (ESA) is actively pursuing technologies and systems for space debris removal under its Clean Space initiative. This overview paper describes the activities that are currently ongoing at ESA and that have already been completed. Additionally it outlines the plan for the near future. The technologies under study fall in two main categories corresponding to whether a pushing or a pulling manoeuvre is required for the de-orbitation. ESA is studying the option of using a tethered capture system for controlled de-orbitation through pulling where the capture is performed using throw-nets or alternatively a harpoon. The Agency is also studying rigid capture systems with a particular emphasis on tentacles (potentially combined with a robotic arm). Here the de-orbitation is achieved through a push-manoeuvre. Additionally, a number of activities will be discussed that are ongoing to develop supporting technologies for these scenarios, or to develop systems for de-orbiting debris that can be allowed to re-enter in an uncontrolled manner. The short term goal and main driver for the current technology developments is to achieve sufficient TRL on required technologies to support a potential de-orbitation mission to remove a large and strategically chosen piece of debris.

Modeling and Simulation of Two Wheelchair Accessories for Pushing Doors.

PubMed

Abdullah, Soran Jalal; Shaikh Mohammed, Javeed

2017-03-27

Independent mobility is vital to individuals of all ages, and wheelchairs have proven to be great personal mobility devices. The tasks of opening and navigating through a door are trivial for healthy people, while the same tasks could be difficult for some wheelchair users. A wide range of intelligent wheelchair controllers and systems, robotic arms, or manipulator attachments integrated with wheelchairs have been developed for various applications, including manipulating door knobs. Unfortunately, the intelligent wheelchairs and robotic attachments are not widely available as commercial products. Therefore, the current manuscript presents the modeling and simulation of a novel but simple technology in the form of a passive wheelchair accessory (straight, arm-like with a single wheel, and arc-shaped with multiple wheels) for pushing doors open from a wheelchair. From the simulations using different wheel shapes and sizes, it was found that the arc-shaped accessory could push open the doors faster and with almost half the required force as compared to the arm-like accessory. Also, smaller spherical wheels were found to be best in terms of reaction forces on the wheels. Prototypes based on the arc-shaped accessory design will be manufactured and evaluated for pushing doors open and dodging or gliding other obstacles.

Analysis of Rapid Multi-Focal Zone ARFI Imaging

PubMed Central

Rosenzweig, Stephen; Palmeri, Mark; Nightingale, Kathryn

2015-01-01

Acoustic radiation force impulse (ARFI) imaging has shown promise for visualizing structure and pathology within multiple organs; however, because the contrast depends on the push beam excitation width, image quality suffers outside of the region of excitation. Multi-focal zone ARFI imaging has previously been used to extend the region of excitation (ROE), but the increased acquisition duration and acoustic exposure have limited its utility. Supersonic shear wave imaging has previously demonstrated that through technological improvements in ultrasound scanners and power supplies, it is possible to rapidly push at multiple locations prior to tracking displacements, facilitating extended depth of field shear wave sources. Similarly, ARFI imaging can utilize these same radiation force excitations to achieve tight pushing beams with a large depth of field. Finite element method simulations and experimental data are presented demonstrating that single- and rapid multi-focal zone ARFI have comparable image quality (less than 20% loss in contrast), but the multi-focal zone approach has an extended axial region of excitation. Additionally, as compared to single push sequences, the rapid multi-focal zone acquisitions improve the contrast to noise ratio by up to 40% in an example 4 mm diameter lesion. PMID:25643078

Optical MEMS for Earth observation

NASA Astrophysics Data System (ADS)

Liotard, Arnaud; Viard, Thierry; Noell, Wilfried; Zamkotsian, Frédéric; Freire, Marco; Guldimann, Benedikt; Kraft, Stefan

2017-11-01

Due to the relatively large number of optical Earth Observation missions at ESA, this area is interesting for new space technology developments. In addition to their compactness, scalability and specific task customization, optical MEMS could generate new functions not available with current technologies and are thus candidates for the design of future space instruments. Most mature components for space applications are the digital mirror arrays, the micro-deformable mirrors, the programmable micro diffraction gratings and tiltable micromirrors. A first selection of market-pull and techno-push concepts is done. In addition, some concepts are coming from outside Earth Observation. Finally two concepts are more deeply analyzed. The first concept is a programmable slit for straylight control for space spectro-imagers. This instrument is a push-broom spectroimager for which some images cannot be exploited because of bright sources in the field-of-view. The proposed concept consists in replacing the current entrance spectrometer slit by an active row of micro-mirrors. The MEMS will permit to dynamically remove the bright sources and then to obtain a field-of-view with an optically enhanced signal-to-noise ratio. The second concept is a push-broom imager for which the acquired spectrum can be tuned by optical MEMS. This system is composed of two diffractive elements and a digital mirror array. The first diffractive element spreads the spectrum. A micromirror array is set at the location of the spectral focal plane. By putting the micro-mirrors ON or OFF, we can select parts of field-of-view or spectrum. The second diffractive element then recombines the light on a push-broom detector. Dichroics filters, strip filter, band-pass filter could be replaced by a unique instrument.

The effect of seat position on manual wheelchair propulsion biomechanics: a quasi-static model-based approach.

PubMed

Richter, W M

2001-12-01

The position of the seat relative to the rear wheels is generally adjusted to modify the rearward stability of the wheelchair. Recent studies have shown that seat position also has an effect on propulsion biomechanics and suggest that seat position can be optimized. A quasi-static wheelchair propulsion model was developed to investigate the mechanism by which seat position affects propulsion biomechanics. Inputs to the model include the length of the user's arm segments, the position of the user's shoulder, the size of handrim used and the force profile on the handrim. Outputs from the model include joint kinematics, joint torques, push angle, and push frequency. Handrim force profile was determined by averaging the force profile of five wheelchair users. Force profiles were measured using the SMARTWheel. The effect of seat position on push angle was found to be directly affected by the length of the position vector from the hub of the wheel to the shoulder and indirectly affected by the angular orientation of the vector. Decreasing hub to shoulder length was found to increase push angle, decrease push frequency, decrease shoulder torque and increase elbow extension torque. It is suggested that future research investigating the role of seat position on propulsion biomechanics include both the kinematics and kinetics of the upper extremity.

Progress in thermal comfort research over the last twenty years.

PubMed

de Dear, R J; Akimoto, T; Arens, E A; Brager, G; Candido, C; Cheong, K W D; Li, B; Nishihara, N; Sekhar, S C; Tanabe, S; Toftum, J; Zhang, H; Zhu, Y

2013-12-01

Climate change and the urgency of decarbonizing the built environment are driving technological innovation in the way we deliver thermal comfort to occupants. These changes, in turn, seem to be setting the directions for contemporary thermal comfort research. This article presents a literature review of major changes, developments, and trends in the field of thermal comfort research over the last 20 years. One of the main paradigm shift was the fundamental conceptual reorientation that has taken place in thermal comfort thinking over the last 20 years; a shift away from the physically based determinism of Fanger's comfort model toward the mainstream and acceptance of the adaptive comfort model. Another noticeable shift has been from the undesirable toward the desirable qualities of air movement. Additionally, sophisticated models covering the physics and physiology of the human body were developed, driven by the continuous challenge to model thermal comfort at the same anatomical resolution and to combine these localized signals into a coherent, global thermal perception. Finally, the demand for ever increasing building energy efficiency is pushing technological innovation in the way we deliver comfortable indoor environments. These trends, in turn, continue setting the directions for contemporary thermal comfort research for the next decades. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Research Technology

NASA Image and Video Library

2002-08-01

An array of components in a laboratory at NASA's Marshall Space Flight Center (MSFC) is being tested by the Flight Mechanics Office to develop an integrated navigation system for the second generation reusable launch vehicle. The laboratory is testing Global Positioning System (GPS) components, a satellite-based location and navigation system, and Inertial Navigation System (INS) components, sensors on a vehicle that determine angular velocity and linear acceleration at various points. The GPS and INS components work together to provide a space vehicle with guidance and navigation, like the push of the OnStar button in your car assists you with directions to a specific address. The integration will enable the vehicle operating system to track where the vehicle is in space and define its trajectory. The use of INS components for navigation is not new to space technology. The Space Shuttle currently uses them. However, the Space Launch Initiative is expanding the technology to integrate GPS and INS components to allow the vehicle to better define its position and more accurately determine vehicle acceleration and velocity. This advanced technology will lower operational costs and enhance the safety of reusable launch vehicles by providing a more comprehensive navigation system with greater capabilities. In this photograph, Dr. Jason Chuang of MSFC inspects an INS component in the laboratory.

4D tracking with ultra-fast silicon detectors

NASA Astrophysics Data System (ADS)

F-W Sadrozinski, Hartmut; Seiden, Abraham; Cartiglia, Nicolò

2018-02-01

The evolution of particle detectors has always pushed the technological limit in order to provide enabling technologies to researchers in all fields of science. One archetypal example is the evolution of silicon detectors, from a system with a few channels 30 years ago, to the tens of millions of independent pixels currently used to track charged particles in all major particle physics experiments. Nowadays, silicon detectors are ubiquitous not only in research laboratories but in almost every high-tech apparatus, from portable phones to hospitals. In this contribution, we present a new direction in the evolution of silicon detectors for charge particle tracking, namely the inclusion of very accurate timing information. This enhancement of the present silicon detector paradigm is enabled by the inclusion of controlled low gain in the detector response, therefore increasing the detector output signal sufficiently to make timing measurement possible. After providing a short overview of the advantage of this new technology, we present the necessary conditions that need to be met for both sensor and readout electronics in order to achieve 4D tracking. In the last section, we present the experimental results, demonstrating the validity of our research path.

High Power Silicon Carbide (SiC) Power Processing Unit Development

NASA Technical Reports Server (NTRS)

Scheidegger, Robert J.; Santiago, Walter; Bozak, Karin E.; Pinero, Luis R.; Birchenough, Arthur G.

2015-01-01

NASA GRC successfully designed, built and tested a technology-push power processing unit for electric propulsion applications that utilizes high voltage silicon carbide (SiC) technology. The development specifically addresses the need for high power electronics to enable electric propulsion systems in the 100s of kilowatts. This unit demonstrated how high voltage combined with superior semiconductor components resulted in exceptional converter performance.

From Research to Flight: Thinking About Implementation While Performing Fundamental Research

NASA Technical Reports Server (NTRS)

Johnson, Les

2010-01-01

This slide presentation calls for a strategy to implement new technologies. Such a strategy would allow advanced space transportation technologies to mature for exploration beyond Earth orbit. It discusses the difference between technology push versus technology pull. It also reviews the three basic technology readiness levels (TRL). The presentation traces examples of technology development to flight application: the Space Shuttle Main Engine Advanced Health Management System, the Friction Stir Welding technology the (auto-adjustable pin tool). A couple of technologies currently not in flight, but are being reviewed for potential use are: cryogenic fluid management (CFM), and solar sail propulsion. There is also an attempt to explain why new technologies are so difficult to field.

Hand forces exerted by long-term care staff when pushing wheelchairs on compliant and non-compliant flooring.

PubMed

Lachance, Chantelle C; Korall, Alexandra M B; Russell, Colin M; Feldman, Fabio; Robinovitch, Stephen N; Mackey, Dawn C

2018-09-01

Purpose-designed compliant flooring and carpeting have been promoted as a means for reducing fall-related injuries in high-risk environments, such as long-term care. However, it is not known whether these surfaces influence the forces that long-term care staff exert when pushing residents in wheelchairs. We studied 14 direct-care staff who pushed a loaded wheelchair instrumented with a triaxial load cell to test the effects on hand force of flooring overlay (vinyl versus carpet) and flooring subfloor (concrete versus compliant rubber [brand: SmartCells]). During straight-line pushing, carpet overlay increased initial and sustained hand forces compared to vinyl overlay by 22-49% over a concrete subfloor and by 8-20% over a compliant subfloor. Compliant subflooring increased initial and sustained hand forces compared to concrete subflooring by 18-31% when under a vinyl overlay. In contrast, compliant flooring caused no change in initial or sustained hand forces compared to concrete subflooring when under a carpet overlay. Copyright © 2018 Elsevier Ltd. All rights reserved.

From Research to Flight: Surviving the TRL Valley of Death for Robotic and Human Space Exploration

NASA Technical Reports Server (NTRS)

Johnson, Les

2009-01-01

There must be a plan or opportunities for flight validation: a) To reduce the bottleneck of new technologies at the TRL Valley of Death; b) To allow frequent infusion of new technologies into flight missions. Risk must be tolerated for new technology flight experiments. Risk must also be accepted on early-adopting missions to enable new capabilities. Fundamental research is critical to taking the next giant leap in the scientific exploration of space. Technology push is often required to meet current mission requirements. Technology management requires more than issuing NRAs and overseeing contracts.

Push-through direct injection NMR: an optimized automation method applied to metabolomics

EPA Science Inventory

There is a pressing need to increase the throughput of NMR analysis in fields such as metabolomics and drug discovery. Direct injection (DI) NMR automation is recognized to have the potential to meet this need due to its suitability for integration with the 96-well plate format. ...

Migrating EO/IR sensors to cloud-based infrastructure as service architectures

NASA Astrophysics Data System (ADS)

Berglie, Stephen T.; Webster, Steven; May, Christopher M.

2014-06-01

The Night Vision Image Generator (NVIG), a product of US Army RDECOM CERDEC NVESD, is a visualization tool used widely throughout Army simulation environments to provide fully attributed synthesized, full motion video using physics-based sensor and environmental effects. The NVIG relies heavily on contemporary hardware-based acceleration and GPU processing techniques, which push the envelope of both enterprise and commodity-level hypervisor support for providing virtual machines with direct access to hardware resources. The NVIG has successfully been integrated into fully virtual environments where system architectures leverage cloudbased technologies to various extents in order to streamline infrastructure and service management. This paper details the challenges presented to engineers seeking to migrate GPU-bound processes, such as the NVIG, to virtual machines and, ultimately, Cloud-Based IAS architectures. In addition, it presents the path that led to success for the NVIG. A brief overview of Cloud-Based infrastructure management tool sets is provided, and several virtual desktop solutions are outlined. A discrimination is made between general purpose virtual desktop technologies compared to technologies that expose GPU-specific capabilities, including direct rendering and hard ware-based video encoding. Candidate hypervisor/virtual machine configurations that nominally satisfy the virtualized hardware-level GPU requirements of the NVIG are presented , and each is subsequently reviewed in light of its implications on higher-level Cloud management techniques. Implementation details are included from the hardware level, through the operating system, to the 3D graphics APls required by the NVIG and similar GPU-bound tools.

Characterising alluvial aquifers in a remote ephemeral catchment (Flinders River, Queensland) using a direct push tracer approach

NASA Astrophysics Data System (ADS)

Taylor, Andrew R.; Smith, Stanley D.; Lamontagne, Sébastien; Suckow, Axel

2018-01-01

The availability of reliable water supplies is a key factor limiting development in northern Australia. However, characterising groundwater resources in this remote part of Australia is challenging due to a lack of existing infrastructure and data. Here, direct push technology (DPT) was used to characterise shallow alluvial aquifers at two locations in the semiarid Flinders River catchment. DPT was used to evaluate the saturated thickness of the aquifer and estimate recharge rates by sampling for environmental tracers in groundwater (major ions, 2H, 18O, 3H and 14C). The alluvium at Fifteen Mile Reserve and Glendalough Station consisted of a mixture of permeable coarse sandy and gravely sediments and less permeable clays and silts. The alluvium was relatively thin (i.e. < 20 m) and, at the time of the investigation, was only partially saturated. Tritium (3H) concentrations in groundwater was ∼1 Tritium Unit (TU), corresponding to a mean residence time for groundwater of about 12 years. The lack of an evaporation signal for the 2H and 18O of groundwater suggests rapid localised recharge from overbank flood events as the primary recharge mechanism. Using the chloride mass balance technique (CMB) and lumped parameter models to interpret patterns in 3H in the aquifer, the mean annual recharge rate varied between 21 and 240 mm/yr. Whilst this recharge rate is relatively high for a semiarid climate, the alluvium is thin and heterogeneous hosting numerous alluvial aquifers with varied connectivity and limited storage capacity. Combining DPT and environmental tracers is a cost-effective strategy to characterise shallow groundwater resources in unconsolidated sedimentary aquifers in remote data sparse areas.

Mobile remote manipulator vehicle system

NASA Technical Reports Server (NTRS)

Bush, Harold G. (Inventor); Mikulas, Martin M., Jr. (Inventor); Wallsom, Richard E. (Inventor); Jensen, J. Kermit (Inventor)

1987-01-01

A mobile remote manipulator system is disclosed for assembly, repair and logistics transport on, around and about a space station square bay truss structure. The vehicle is supported by a square track arrangement supported by guide pins integral with the space station truss structure and located at each truss node. Propulsion is provided by a central push-pull drive mechanism that extends out from the vehicle one full structural bay over the truss and locks drive rods into the guide pins. The draw bar is now retracted and the mobile remote manipulator system is pulled onto the next adjacent structural bay. Thus, translation of the vehicle is inchworm style. The drive bar can be locked onto two guide pins while the extendable draw bar is within the vehicle and then push the vehicle away one bay providing bidirectional push-pull drive. The track switches allow the vehicle to travel in two orthogonal directions over the truss structure which coupled with the bidirectional drive, allow movement in four directions on one plane. The top layer of this trilayered vehicle is a logistics platform. This platform is capable of 369 degees of rotation and will have two astronaut foot restraint platforms and a space crane integral.

Research on Precision Tracking on Fast Steering Mirror and Control Strategy

NASA Astrophysics Data System (ADS)

Di, Lin; Yi-ming, Wu; Fan, Zhu

2018-01-01

Fast steering mirror is a device used for controlling the beam direction precisely. Due to the short travel of the push-pull FSM, a compound fast steering mirror system driven by both limited-angle voice coil motor and push-pull FSM together is proposed. In the compound FSM system, limited-angle voice coil motor quickly swings at wide angle, while the push-pull FSM do high frequency movement in a small range, which provides the system with the high bandwidth and long travel. In the control strategy, the method of combining feed-forward control in Kalman filtering with auto-disturbance rejection control is used to improve trajectory tracking accuracy. The simulation result shows that tracking accuracy measured by the compound method can be improved by more than 5 times than that of the conventional PID.

Particle Engulfment and Pushing by Solidifying Interfaces LMS Mission Results

NASA Technical Reports Server (NTRS)

Juretzko, Frank R.; Catalina, Adrian V.; Stefanescu, Doru M.; Dhindaw, Brij K.; Sen, Subhayu; Curreri, Peter A.; Mullins, Jennifer

1998-01-01

Results of the directional solidification experiments on Particle Engulfment and Pushing by Solidifying Interfaces (PEP) conducted on the space shuttle Columbia are reported. The experiment was manifested as part of The Life and Microgravity Science Mission. Two pure aluminum (99.999%) 9 mm cylindrical rods, loaded with about 2 vol.% 500 microns diameter zirconia particles were melted and directionally solidified in the microgravity (micro-g) environment of the shuttle. The particles were non-reactive with the matrices within the temperature range of interest. The experiments were conducted such as to insure a planar solid/liquid interface during solidification. Two different cartridge - crucible - sample designs were used: a spring-piston and expansion void. Both resulted in sound samples. Samples were evaluated post-flight for soundness by X-ray computer tomography (XCT).

Research and application of knowledge resources network for product innovation.

PubMed

Li, Chuan; Li, Wen-qiang; Li, Yan; Na, Hui-zhen; Shi, Qian

2015-01-01

In order to enhance the capabilities of knowledge service in product innovation design service platform, a method of acquiring knowledge resources supporting for product innovation from the Internet and providing knowledge active push is proposed. Through knowledge modeling for product innovation based on ontology, the integrated architecture of knowledge resources network is put forward. The technology for the acquisition of network knowledge resources based on focused crawler and web services is studied. Knowledge active push is provided for users by user behavior analysis and knowledge evaluation in order to improve users' enthusiasm for participation in platform. Finally, an application example is illustrated to prove the effectiveness of the method.

Text Content Pushing Technology Research Based on Location and Topic

NASA Astrophysics Data System (ADS)

Wei, Dongqi; Wei, Jianxin; Wumuti, Naheman; Jiang, Baode

2016-11-01

In the field, geological workers usually want to obtain related geological background information in the working area quickly and accurately. This information exists in the massive geological data, text data is described in natural language accounted for a large proportion. This paper studied location information extracting method in the mass text data; proposed a geographic location—geological content—geological content related algorithm based on Spark and Mapreduce2, finally classified content by using KNN, and built the content pushing system based on location and topic. It is running in the geological survey cloud, and we have gained a good effect in testing by using real geological data.

Environmental assessment of digestate treatment technologies using LCA methodology.

PubMed

Vázquez-Rowe, Ian; Golkowska, Katarzyna; Lebuf, Viooltje; Vaneeckhaute, Céline; Michels, Evi; Meers, Erik; Benetto, Enrico; Koster, Daniel

2015-09-01

The production of biogas from energy crops, organic waste and manure has augmented considerably the amounts of digestate available in Flanders. This has pushed authorities to steadily introduce legislative changes to promote its use as a fertilising agent. There is limited arable land in Flanders, which entails that digestate has to compete with animal manure to be spread. This forces many anaerobic digestion plants to further treat digestate in such a way that it can either be exported or the nitrogen be removed. Nevertheless, the environmental impact of these treatment options is still widely unknown, as well as the influence of these impacts on the sustainability of Flemish anaerobic digestion plants in comparison to other regions where spreading of raw digestate is allowed. Despite important economic aspects that must be considered, the use of Life Cycle Assessment (LCA) is suggested in this study to identify the environmental impacts of spreading digestate directly as compared to four different treatment technologies. Results suggest relevant environmental gains when the digestate mix is treated using the examined conversion technologies prior to spreading, although important trade-offs between impact categories were observed and discussed. The promising results of digestate conversion technologies suggest that further LCA analyses should be performed to delve into, for instance, the appropriateness to shift to nutrient recovery technologies rather than digestate conversion treatments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Designing for the Next Web.

ERIC Educational Resources Information Center

Bremser, Wayne

1998-01-01

Discusses how to choose from the available interactive graphic-design possibilities for the World Wide Web. Compatibility and appropriateness are discussed; and DHTML (Dynamic Hypertext Markup Language), Java, CSS (Cascading Style Sheets), plug-ins, ActiveX, and Push and channel technologies are described. (LRW)

Space optics technology at SAGEM

NASA Astrophysics Data System (ADS)

Geyl, Roland; Thepaut, Luc

2017-11-01

Space optics is continuously pushing its suppliers like SAGEM towards new limits. In this paper, latest developments of state of the art space optical equipment will be presented through SAGEM, and its REOSC Products family, contribution to several projects presently running in the company.

Security-Enhanced Push Button Configuration for Home Smart Control.

PubMed

Han, Junghee; Park, Taejoon

2017-06-08

With the emergence of smart and converged home services, the need for the secure and easy interplay of various devices has been increased. Push Button Configuration (PBC) is one of the technologies proposed for easy set-up of a secure session between IT and consumer devices. Although the Wi-Fi Direct specification explicitly states that all devices must support the PBC method, its applicability is very limited. This is because the security vulnerability of PBC can be maliciously exploited so that attackers can make illegitimate sessions with consumer devices. To address this problem, this paper proposes a novel Security-enhanced PBC (SePBC) scheme with which we can uncover suspicious or malicious devices. The proposed mechanism has several unique features. First, we develop a secure handshake distance measurement protocol by preventing an adversary sitting outside the region from maliciously manipulating its distance to be fake. Second, it is compatible with the original Wi-Fi PBC without introducing a brand-new methodology. Finally, SePBC uses lightweight operations without CPU-intensive cryptography computation and employs inexpensive H/W. Moreover, it needs to incur little overhead when there is no attack. This paper also designs and implements the proposed SePBC in the real world. Our experimental results and analysis show that the proposed SePBC scheme effectively defeats attacks on PBC while minimizing the modification of the original PBC equipment.

Security-Enhanced Push Button Configuration for Home Smart Control †

PubMed Central

Han, Junghee; Park, Taejoon

2017-01-01

With the emergence of smart and converged home services, the need for the secure and easy interplay of various devices has been increased. Push Button Configuration (PBC) is one of the technologies proposed for easy set-up of a secure session between IT and consumer devices. Although the Wi-Fi Direct specification explicitly states that all devices must support the PBC method, its applicability is very limited. This is because the security vulnerability of PBC can be maliciously exploited so that attackers can make illegitimate sessions with consumer devices. To address this problem, this paper proposes a novel Security-enhanced PBC (SePBC) scheme with which we can uncover suspicious or malicious devices. The proposed mechanism has several unique features. First, we develop a secure handshake distance measurement protocol by preventing an adversary sitting outside the region from maliciously manipulating its distance to be fake. Second, it is compatible with the original Wi-Fi PBC without introducing a brand-new methodology. Finally, SePBC uses lightweight operations without CPU-intensive cryptography computation and employs inexpensive H/W. Moreover, it needs to incur little overhead when there is no attack. This paper also designs and implements the proposed SePBC in the real world. Our experimental results and analysis show that the proposed SePBC scheme effectively defeats attacks on PBC while minimizing the modification of the original PBC equipment. PMID:28594370

Predicting Bobsled Pushing Ability from Various Combine Testing Events.

PubMed

Tomasevicz, Curtis L; Ransone, Jack W; Bach, Christopher W

2018-03-12

The requisite combination of speed, power, and strength necessary for a bobsled push athlete coupled with the difficulty in directly measuring pushing ability makes selecting effective push crews challenging. Current practices by USA Bobsled and Skeleton (USABS) utilize field combine testing to assess and identify specifically selected performance variables in an attempt to best predict push performance abilities. Combine data consisting of 11 physical performance variables were collected from 75 subjects across two winter Olympic qualification years (2009 and 2013). These variables were sprints of 15-, 30-, and 60 m, a flying 30 m sprint, a standing broad jump, a shot toss, squat, power clean, body mass, and dry-land brake and side bobsled pushes. Discriminant Analysis (DA) in addition to Principle Component Analysis (PCA) was used to investigate two cases (Case 1: Olympians vs. non-Olympians; Case 2: National Team vs. non-National Team). Using these 11 variables, DA led to a classification rule that proved capable of identifying Olympians from non-Olympians and National Team members from non-National Team members with 9.33% and 14.67% misclassification rates, respectively. The PCA was used to find similar test variables within the combine that provided redundant or useless data. After eliminating the unnecessary variables, DA on the new combinations showed that 8 (Case 1) and 20 (Case 2) other combinations with fewer performance variables yielded misclassification rates as low as 6.67% and 13.33% respectively. Utilizing fewer performance variables can allow governing bodies in many other sports to create more appropriate combine testing that maximize accuracy, while minimizing irrelevant and redundant strategies.

Tribology needs for future space and aeronautical systems

NASA Technical Reports Server (NTRS)

Fusaro, Robert L.

1991-01-01

Future aeronautical and space missions will push tribology technology beyond its current capability. The objective is to discuss the current state of the art of tribology as it is applied to advanced aircraft and spacecraft. Areas of discussion include materials lubrication mechanisms, factors affecting lubrication, current and future tribological problem areas, potential new lubrication techniques, and perceived technology requirements that need to be met in order to solve these tribology problems.

Beyond Bloom, Memorization, and Regurgitation: Forging the Path to a 21st Century PME

DTIC Science & Technology

2013-12-04

due in large part to the rapid changes of technology , rise in hostile nonstate actors, and globalization. However, the Joint Force possesses a combat...procedures, and policies while innovatively employing new technologies .”35 With senior leaders pushing to address inefficiencies, advocates for improved...resident PME staffs, mostly military personnel without academic credentials, comprise the core faculty responsible for writing and executing

Manufacturing Technology Support (MATES). Delivery Order 0002: Business Practices Assessment (BPA) Development

DTIC Science & Technology

2008-03-01

order fulfillment visibility, Kanban deployment, inventory count can be made visually, machines and tool labeling, costs, preventive maintenance...order fulfillment, computer scheduling versus Kanban , pull versus push systems, flow time efficiencies, back room costs of scheduling, MRP costs

Approaches and Concerns in Myanmar

ERIC Educational Resources Information Center

Mar, Naing Yee

2005-01-01

The information age has changed the economic and social environment in such ways that countries are moving from being "traditional pull" to "technology push" societies. This makes technical and vocational education and training (TVET) policy especially significant as it seeks to promote specialized practical and professional…

News Media Industry

DTIC Science & Technology

2006-01-01

technology, changing consumer behavior and increased pressure for profitability. These three forces are the catalysts of change and have pushed the...model in order to compete. Consumer Behavior : Changes in consumer behavior began with the growth of broadcast television in the 1960’s and 70’s

Advanced Space Flight and Environmental Concerns

NASA Technical Reports Server (NTRS)

Whitaker, A.

2001-01-01

The aerospace industry has conquered numerous environmental challenges during the last decade. The aerospace industry of today has evolved due in part to the environmental challenges, becoming stronger, more robust, learning to push the limits of technology, materials and manufacturing, and performing cutting edge engineering.

Quantification of whispering gallery mode spectrum variability in application to sensing nanobiophotonics

NASA Astrophysics Data System (ADS)

Saetchnikov, Anton; Skakun, Victor; Saetchnikov, Vladimir; Tcherniavskaia, Elina; Ostendorf, Andreas

2017-10-01

An approach for the automated whispering gallery mode (WGM) signal decomposition and its parameter estimation is discussed. The algorithm is based on the peak picking and can be applied for the preprocessing of the raw signal acquired from the multiplied WGM-based biosensing chips. Quantitative estimations representing physically meaningful parameters of the external disturbing factors on the WGM spectral shape are the output values. Derived parameters can be directly applied to the further deep qualitative and quantitative interpretations of the sensed disturbing factors. The algorithm is tested on both simulated and experimental data taken from the bovine serum albumin biosensing task. The proposed solution is expected to be a useful contribution to the preprocessing phase of the complete data analysis engine and is expected to push the WGM technology toward the real-live sensing nanobiophotonics.

Direct sampling for stand density index

Treesearch

Mark J. Ducey; Harry T. Valentine

2008-01-01

A direct method of estimating stand density index in the field, without complex calculations, would be useful in a variety of silvicultural situations. We present just such a method. The approach uses an ordinary prism or other angle gauge, but it involves deliberately "pushing the point" or, in some cases, "pulling the point." This adjusts the...

Lower limb joint kinetics and ankle joint stiffness in the sprint start push-off.

PubMed

Charalambous, Laura; Irwin, Gareth; Bezodis, Ian N; Kerwin, David

2012-01-01

Sprint push-off technique is fundamental to sprint performance and joint stiffness has been identified as a performance-related variable during dynamic movements. However, joint stiffness for the push-off and its relationship with performance (times and velocities) has not been reported. The aim of this study was to quantify and explain lower limb net joint moments and mechanical powers, and ankle stiffness during the first stance phase of the push-off. One elite sprinter performed 10 maximal sprint starts. An automatic motion analysis system (CODA, 200 Hz) with synchronized force plates (Kistler, 1000 Hz) collected kinematic profiles at the hip, knee, and ankle and ground reaction forces, providing input for inverse dynamics analyses. The lower-limb joints predominately extended and revealed a proximal-to-distal sequential pattern of maximal extensor angular velocity and positive power production. Pearson correlations revealed relationships (P < 0.05) between ankle stiffness (5.93 ± 0.75 N x m x deg(-1)) and selected performance variables. Relationships between negative power phase ankle stiffness and horizontal (r = -0.79) and vertical (r = 0.74) centre of mass velocities were opposite in direction to the positive power phase ankle stiffness (horizontal: r = 0.85; vertical: r = -0.54). Thus ankle stiffness may affect the goals of the sprint push-off in different ways, depending on the phase of stance considered.

The Bright, Artificial Intelligence-Augmented Future of Neuroimaging Reading

PubMed Central

Hainc, Nicolin; Federau, Christian; Stieltjes, Bram; Blatow, Maria; Bink, Andrea; Stippich, Christoph

2017-01-01

Radiologists are among the first physicians to be directly affected by advances in computer technology. Computers are already capable of analyzing medical imaging data, and with decades worth of digital information available for training, will an artificial intelligence (AI) one day signal the end of the human radiologist? With the ever increasing work load combined with the looming doctor shortage, radiologists will be pushed far beyond their current estimated 3 s allotted time-of-analysis per image; an AI with super-human capabilities might seem like a logical replacement. We feel, however, that AI will lead to an augmentation rather than a replacement of the radiologist. The AI will be relied upon to handle the tedious, time-consuming tasks of detecting and segmenting outliers while possibly generating new, unanticipated results that can then be used as sources of medical discovery. This will affect not only radiologists but all physicians and also researchers dealing with medical imaging. Therefore, we must embrace future technology and collaborate interdisciplinary to spearhead the next revolution in medicine. PMID:28983278

Research on the development and preliminary application of Beijing agricultural sci-tech service hotline WebApp in agricultural consulting services

NASA Astrophysics Data System (ADS)

Yu, Weishui; Luo, Changshou; Zheng, Yaming; Wei, Qingfeng; Cao, Chengzhong

2017-09-01

To deal with the “last kilometer” problem during the agricultural science and technology information service, we analyzed the feasibility, necessity and advantages of WebApp applied to agricultural information service and discussed the modes of WebApp used in agricultural information service based on the requirements analysis and the function of WebApp. To overcome the existing App’s defects of difficult installation and weak compatibility between the mobile operating systems, the Beijing Agricultural Sci-tech Service Hotline WebApp was developed based on the HTML and JAVA technology. The WebApp has greater compatibility and simpler operation than the Native App, what’s more, it can be linked to the WeChat public platform making it spread easily and run directly without setup process. The WebApp was used to provide agricultural expert consulting services and agriculture information push, obtained a good preliminary application achievement. Finally, we concluded the creative application of WebApp in agricultural consulting services and prospected the development of WebApp in agricultural information service.

Sustainable rural telehealth innovation: a public health case study.

PubMed

Singh, Rajendra; Mathiassen, Lars; Stachura, Max E; Astapova, Elena V

2010-08-01

To examine adoption of telehealth in a rural public health district and to explain how the innovation became sustainable. Longitudinal, qualitative study (1988-2008) of the largest public health district in Georgia. Case study design provided deep insights into the innovation's social dynamics. Punctuated equilibrium theory helped present and make sense of the process. We identified antecedent conditions and outcomes, and we distinguished between episodes and encounters based on the disruptive effects of events. Twenty-five semistructured interviews with 19 decision makers and professionals, direct observations, published papers, grant proposals, technical specifications, and other written materials. Strong collaboration within the district, with local community, and with external partners energized the process. Well-functioning outreach clinics made telehealth desirable. Local champions cultivated participation and generative capability, and overcame barriers through opportunistic exploitation of technological and financial options. Telehealth usage fluctuated between medical and administrative operations in response to internal needs and contextual dynamics. External agencies provided initial funding and supported later expansion. Extensive internal and external collaboration, and a combination of technology push and opportunistic exploitation, can enable sustainable rural telehealth innovation.

Exploring for the optimal structural design for the 3D-printing technology for cranial reconstruction: a biomechanical and histological study comparison of solid vs. porous structure.

PubMed

Lim, Jun Young; Kim, Namhyun; Park, Jong-Chul; Yoo, Sun K; Shin, Dong Ah; Shim, Kyu-Won

2017-09-01

Cranioplasty for recovering skull defects carries the risk for a number of complications. Various materials are used, including autologous bone graft, metallic materials, and non-metallic materials, each of which has advantages and disadvantages. If the use of autologous bone is not feasible, those artificial materials also have constraints in the case of complex anatomy and/or irregular defects. This study used metal 3D-printing technology to overcome these existing drawbacks and analyze the clinical and mechanical performance requirements. To find an optimal structure that satisfied the structural and mechanical stability requirements, we evaluated biomechanical stability using finite element analysis (FEA) and mechanical testing. To ensure clinical applicability, the model was subjected to histological evaluation. Each specimen was implanted in the femur of a rabbit and was evaluated using histological measurements and push-out test. We believe that our data will provide the basis for future applications of a variety of unit structures and further clinical trials and research, as well as the direction for the study of other patient-specific implants.

A Two-Magnet System to Push Therapeutic Nanoparticles

NASA Astrophysics Data System (ADS)

Shapiro, Benjamin; Dormer, Kenneth; Rutel, Isaac B.

2010-12-01

Magnetic fields can be used to direct magnetically susceptible nanoparticles to disease locations: to infections, blood clots, or tumors. Any single magnet always attracts (pulls) ferro- or para-magnetic particles towards it. External magnets have been used to pull therapeutics into tumors near the skin in animals and human clinical trials. Implanting magnetic materials into patients (a feasible approach in some cases) has been envisioned as a means of reaching deeper targets. Yet there are a number of clinical needs, ranging from treatments of the inner ear, to antibiotic-resistant skin infections and cardiac arrhythmias, which would benefit from an ability to magnetically "inject", or push in, nanomedicines. We develop, analyze, and experimentally demonstrate a novel, simple, and effective arrangement of just two permanent magnets that can magnetically push particles. Such a system might treat diseases of the inner ear; diseases which intravenously injected or orally administered treatments cannot reach due to the blood-brain barrier.

Effects of load position and force direction on back muscle loading in one-wheeled wheelbarrow tasks.

PubMed

Chen, Su-Huang; Lee, Yung-Hui; Lin, Chiuhsiang Joe

2015-01-01

Various parameters related to pushing/pulling tasks have been examined yet the effects of changing the load position in one-wheeled wheelbarrow task has not been examined. To explore the effects of load position and force direction on muscle activity during wheelbarrow tasks. Nine participants were recruited to take part in the experiment. Each participant performed 18 trials consisting of 2 force directions (push and pull) and 9 load positions. The dependent variables were EMG of erector spinae and gripping force. ANOVA was used to identify significant differences between force direction and load position in EMG and gripping force data. Results showed that peak EMG was lowest for the left and right erector spinae when the load was positioned farther from the participant. Peak EMG of the bilateral erector spinae increased when the weight was near the participant and on the ipsilateral hand. Based on the EMG results, we suggest that loads be arranged in the anterior part of the bin in order to reduce muscle activity on the spine during the wheelbarrow task. This finding also provides some directions in the improvement and ergonomic redesign of the one-wheeled wheelbarrow.

Imitation and Emulation by Dogs Using a Bidirectional Control Procedure

PubMed Central

Miller, Holly C.; Rayburn-Reeves, Rebecca; Zentall, Thomas R.

2009-01-01

A successful procedure for studying imitative behavior in non-humans is the bidirectional control procedure in which observers are exposed to a demonstrator that responds by moving a manipulandum in one of two different directions (e.g., left vs. right). Imitative learning is demonstrated when observers make the response in the direction that they observed it being made. This procedure controls for socially mediated effects (the mere presence of a demonstrator), stimulus enhancement (attention drawn to a manipulandum by its movement), and if an appropriate control is included, emulation (learning how the environment works). Recent research with dogs has found that dogs may not demonstrate imitative learning when the demonstrator is human. In the present research, we found that when odors were controlled for, dogs imitated the direction of a screen push demonstrated by another dog more than in a control condition in which they observed the screen move independently while another dog was present. Furthermore, we found that dogs would match the direction of screen push demonstrated by a human and they were equally likely to match the direction in which the screen moved independently while a human was present. PMID:18977419

Tech Gets Physical

ERIC Educational Resources Information Center

Ravage, Barbara

2011-01-01

As colleges push for increased efficiencies, facilities departments nationwide are turning more and more to high-tech approaches. Nowhere has this trend been more visible than in the realm of energy consumption, where managers hope to extract significant cost savings. Technology is helping facilities managers achieve significant efficiencies,…

L band push broom microwave radiometer: Soil moisture verification and time series experiment Delmarva Peninsula

NASA Technical Reports Server (NTRS)

Jackson, T. J.; Shiue, J.; Oneill, P.; Wang, J.; Fuchs, J.; Owe, M.

1984-01-01

The verification of a multi-sensor aircraft system developed to study soil moisture applications is discussed. This system consisted of a three beam push broom L band microwave radiometer, a thermal infrared scanner, a multispectral scanner, video and photographic cameras and an onboard navigational instrument. Ten flights were made of agricultural sites in Maryland and Delaware with little or no vegetation cover. Comparisons of aircraft and ground measurements showed that the system was reliable and consistent. Time series analysis of microwave and evaporation data showed a strong similarity that indicates a potential direction for future research.

Research and Application of Knowledge Resources Network for Product Innovation

PubMed Central

Li, Chuan; Li, Wen-qiang; Li, Yan; Na, Hui-zhen; Shi, Qian

2015-01-01

In order to enhance the capabilities of knowledge service in product innovation design service platform, a method of acquiring knowledge resources supporting for product innovation from the Internet and providing knowledge active push is proposed. Through knowledge modeling for product innovation based on ontology, the integrated architecture of knowledge resources network is put forward. The technology for the acquisition of network knowledge resources based on focused crawler and web services is studied. Knowledge active push is provided for users by user behavior analysis and knowledge evaluation in order to improve users' enthusiasm for participation in platform. Finally, an application example is illustrated to prove the effectiveness of the method. PMID:25884031

Microgravity Boiling Enhancement Using Vibration-Based Fluidic Technologies

NASA Astrophysics Data System (ADS)

Smith, Marc K.; Glezer, Ari; Heffington, Samuel N.

2002-11-01

Thermal management is an important subsystem in many devices and technologies used in a microgravity environment. The increased power requirements of new Space technologies and missions mean that the capacity and efficiency of thermal management systems must be improved. The current work addresses this need through the investigation and development of a direct liquid immersion heat transfer cell for microgravity applications. The device is based on boiling heat transfer enhanced by two fluidic technologies developed at Georgia Tech. The first of these fluidic technologies, called vibration-induced bubble ejection, is shown in Fig. 1. Here, an air bubble in water is held against a vibrating diaphragm by buoyancy. The vibrations at 440 Hz induce violent oscillations of the air/water interface that can result in small bubbles being ejected from the larger air bubble (Fig. 1a) and, simultaneously, the collapse of the air/water interface against the solid surface (Fig. 1b). Both effects would be useful during a heat transfer process. Bubble ejection would force vapor bubbles back into the cooler liquid so that they can condense. Interfacial collapse would tend to keep the hot surface wet thereby increasing liquid evaporation and heat transfer to the bulk liquid. Figure 2 shows the effect of vibrating the solid surface at 7.6 kHz. Here, small-scale capillary waves appear on the surface of the bubble near the attachment point on the solid surface (the grainy region). The vibration produces a net force on the bubble that pushes it away from the solid surface. As a result, the bubble detaches from the solid and is propelled into the bulk liquid. This force works against buoyancy and so it would be even more effective in a microgravity environment. The benefit of the force in a boiling process would be to push vapor bubbles off the solid surface, thus helping to keep the solid surface wet and increasing the heat transfer. The second fluidic technology to be employed in this work is a synthetic jet, shown schematically in Fig. 3. The jet is produced using a small, sealed cavity with a sharp-edged orifice on one side and a vibrating diaphragm on the opposite side. The jet is formed when fluid is alternately sucked into and then expelled from the cavity by the motion of the diaphragm. This alternating motion means that there is no net mass addition to the system. Thus, there is no need for input piping or complex fluidic packaging.

Does dynamic stability govern propulsive force generation in human walking?

PubMed Central

Browne, Michael G.

2017-01-01

Before succumbing to slower speeds, older adults may walk with a diminished push-off to prioritize stability over mobility. However, direct evidence for trade-offs between push-off intensity and balance control in human walking, independent of changes in speed, has remained elusive. As a critical first step, we conducted two experiments to investigate: (i) the independent effects of walking speed and propulsive force (FP) generation on dynamic stability in young adults, and (ii) the extent to which young adults prioritize dynamic stability in selecting their preferred combination of walking speed and FP generation. Subjects walked on a force-measuring treadmill across a range of speeds as well as at constant speeds while modulating their FP according to a visual biofeedback paradigm based on real-time force measurements. In contrast to improvements when walking slower, walking with a diminished push-off worsened dynamic stability by up to 32%. Rather, we find that young adults adopt an FP at their preferred walking speed that maximizes dynamic stability. One implication of these findings is that the onset of a diminished push-off in old age may independently contribute to poorer balance control and precipitate slower walking speeds. PMID:29291129

Does dynamic stability govern propulsive force generation in human walking?

PubMed

Browne, Michael G; Franz, Jason R

2017-11-01

Before succumbing to slower speeds, older adults may walk with a diminished push-off to prioritize stability over mobility. However, direct evidence for trade-offs between push-off intensity and balance control in human walking, independent of changes in speed, has remained elusive. As a critical first step, we conducted two experiments to investigate: (i) the independent effects of walking speed and propulsive force ( F P ) generation on dynamic stability in young adults, and (ii) the extent to which young adults prioritize dynamic stability in selecting their preferred combination of walking speed and F P generation. Subjects walked on a force-measuring treadmill across a range of speeds as well as at constant speeds while modulating their F P according to a visual biofeedback paradigm based on real-time force measurements. In contrast to improvements when walking slower, walking with a diminished push-off worsened dynamic stability by up to 32%. Rather, we find that young adults adopt an F P at their preferred walking speed that maximizes dynamic stability. One implication of these findings is that the onset of a diminished push-off in old age may independently contribute to poorer balance control and precipitate slower walking speeds.

Branched actin networks push against each other at adherens junctions to maintain cell-cell adhesion.

PubMed

Efimova, Nadia; Svitkina, Tatyana M

2018-05-07

Adherens junctions (AJs) are mechanosensitive cadherin-based intercellular adhesions that interact with the actin cytoskeleton and carry most of the mechanical load at cell-cell junctions. Both Arp2/3 complex-dependent actin polymerization generating pushing force and nonmuscle myosin II (NMII)-dependent contraction producing pulling force are necessary for AJ morphogenesis. Which actin system directly interacts with AJs is unknown. Using platinum replica electron microscopy of endothelial cells, we show that vascular endothelial (VE)-cadherin colocalizes with Arp2/3 complex-positive actin networks at different AJ types and is positioned at the interface between two oppositely oriented branched networks from adjacent cells. In contrast, actin-NMII bundles are located more distally from the VE-cadherin-rich zone. After Arp2/3 complex inhibition, linear AJs split, leaving gaps between cells with detergent-insoluble VE-cadherin transiently associated with the gap edges. After NMII inhibition, VE-cadherin is lost from gap edges. We propose that the actin cytoskeleton at AJs acts as a dynamic push-pull system, wherein pushing forces maintain extracellular VE-cadherin transinteraction and pulling forces stabilize intracellular adhesion complexes. © 2018 Efimova and Svitkina.

Effects of UAV Supervisory Control on F-18 Formation Flight Performance in a Simulator Environment

DTIC Science & Technology

2013-03-01

words) Continual advances in technology, along with increased cockpit workload— particularly the shift from two- seat to single- seat fighters to save...INTENTIONALLY LEFT BLANK v ABSTRACT Continual advances in technology, along with increased cockpit workload— particularly the shift from two- seat to...single- seat fighters to save money and reduce risk to life—push the limits of human mental capacity. Additionally, there is interest within the

Space Suit Technologies Protect Deep-Sea Divers

NASA Technical Reports Server (NTRS)

2008-01-01

Working on NASA missions allows engineers and scientists to hone their skills. Creating devices for the high-stress rigors of space travel pushes designers to their limits, and the results often far exceed the original concepts. The technologies developed for the extreme environment of space are often applicable here on Earth. Some of these NASA technologies, for example, have been applied to the breathing apparatuses worn by firefighters, the fire-resistant suits worn by racecar crews, and, most recently, the deep-sea gear worn by U.S. Navy divers.

Adhesion and friction of the smooth attachment system of the cockroach Gromphadorhina portentosa and the influence of the application of fluid adhesives

PubMed Central

Frenzel, Melina; Steiner, Michael; Vogt, Martin; Kleemeier, Malte; Hartwig, Andreas; Sampalla, Benjamin; Rupp, Frank; Boley, Moritz; Schmitt, Christian

2017-01-01

ABSTRACT Two different measurement techniques were applied to study the attachment of the smooth foot pads of the Madagascar hissing cockroach Gromphadorhina portentosa. The attachment of the non-manipulated adhesive organs was compared with that of manipulated ones (depletion or substitution by artificial secretions). From measurements of the friction on a centrifuge, it can be concluded that on nanorough surfaces, the insect appears to benefit from employing emulsions instead of pure oils to avoid excessive friction. Measurements performed with a nanotribometer on single attachment organs showed that, in the non-manipulated euplantulae, friction was clearly increased in the push direction, whereas the arolium of the fore tarsus showed higher friction in the pull direction. The surface of the euplantulae shows an imbricate appearance, whereupon the ledges face distally, which might contribute to the observed frictional anisotropy in the push direction. Upon depletion of the tarsal adhesion-mediating secretion or its replacement by oily fluids, in several cases, the anisotropic effect of the euplantula disappeared due to the decrease of friction forces in push-direction. In the euplantulae, adhesion was one to two orders of magnitude lower than friction. Whereas the tenacity was slightly decreased with depleted secretion, it was considerably increased after artificial application of oily liquids. In terms of adhesion, it is concluded that the semi-solid consistence of the natural adhesion-mediating secretion facilitates the detachment of the tarsus during locomotion. In terms of friction, on smooth to nanorough surfaces, the insects appear to benefit from employing emulsions instead of pure oils to avoid excessive friction forces, whereas on rougher surfaces the tarsal fluid rather functions in improving surface contact by keeping the cuticle compliable and compensating surface asperities of the substratum. PMID:28507055

Push-through Direction Injectin NMR Automation

EPA Science Inventory

Nuclear magnetic resonance (NMR) and mass spectrometry (MS) are the two major spectroscopic techniques successfully used in metabolomics studies. The non-invasive, quantitative and reproducible characteristics make NMR spectroscopy an excellent technique for detection of endogeno...

How Multilingual African Contexts Are Pushing Educational Research and Practice in New Directions

ERIC Educational Resources Information Center

Benson, Carol

2010-01-01

A strong case can be made for developing more flexible and relevant multilingual strategies for teaching and learning within the field of bilingual education. This paper aims to demonstrate how current linguistic and educational practices in countries like Guinea-Bissau, Mozambique and Ethiopia suggest new directions for research and practice. A…

Mobile Apps and Transportation : A Review of Smartphone Apps and a Study of User Response to Multimodal Traveler Information.

DOT National Transportation Integrated Search

2016-10-01

In recent years, technological and social forces have pushed smartphone applications (apps) from the fringe to the mainstream. Understanding the role of transportation apps in urban mobility is important for policy development and transportation plan...

Companion and refuge plants to control insect pests

USDA-ARS?s Scientific Manuscript database

Introduction: The sweetpotato whitefly, Bemisia tabaci and aphids are major pests of crops in the southeast USA. An environmentally-friendly management strategy is “push-pull” technology which combines the use of repellent (“push”) and trap crops (“pull”) for insect pest control. The repellent crop,...

Pushing the Boundaries: Zines and Libraries.

ERIC Educational Resources Information Center

Dodge, Chris

1995-01-01

Describes zines (self-published magazines); suggests librarians should regard zines as historical sources of culture and include them in materials selection. Discusses the role of technology in publication and distribution; the audience; cataloging problems; free speech; and zines on the Internet. Sidebars provide information on selected zines and…

Push-pull tracer tests: Their information content and use for characterizing non-Fickian, mobile-immobile behavior: INFORMATION CONTENT OF PUSH-PULL TESTS

DOE PAGES

Hansen, Scott K.; Berkowitz, Brian; Vesselinov, Velimir V.; ...

2016-12-01

Path reversibility and radial symmetry are often assumed in push-pull tracer test analysis. In reality, heterogeneous flow fields mean that both assumptions are idealizations. In this paper, to understand their impact, we perform a parametric study which quantifies the scattering effects of ambient flow, local-scale dispersion, and velocity field heterogeneity on push-pull breakthrough curves and compares them to the effects of mobile-immobile mass transfer (MIMT) processes including sorption and diffusion into secondary porosity. We identify specific circumstances in which MIMT overwhelmingly determines the breakthrough curve, which may then be considered uninformative about drift and local-scale dispersion. Assuming path reversibility, wemore » develop a continuous-time-random-walk-based interpretation framework which is flow-field-agnostic and well suited to quantifying MIMT. Adopting this perspective, we show that the radial flow assumption is often harmless: to the extent that solute paths are reversible, the breakthrough curve is uninformative about velocity field heterogeneity. Our interpretation method determines a mapping function (i.e., subordinator) from travel time in the absence of MIMT to travel time in its presence. A mathematical theory allowing this function to be directly “plugged into” an existing Laplace-domain transport model to incorporate MIMT is presented and demonstrated. Algorithms implementing the calibration are presented and applied to interpretation of data from a push-pull test performed in a heterogeneous environment. A successful four-parameter fit is obtained, of comparable fidelity to one obtained using a million-node 3-D numerical model. In conclusion, we demonstrate analytically and numerically how push-pull tests quantifying MIMT are sensitive to remobilization, but not immobilization, kinetics.« less

Push-pull tracer tests: Their information content and use for characterizing non-Fickian, mobile-immobile behavior: INFORMATION CONTENT OF PUSH-PULL TESTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, Scott K.; Berkowitz, Brian; Vesselinov, Velimir V.

Path reversibility and radial symmetry are often assumed in push-pull tracer test analysis. In reality, heterogeneous flow fields mean that both assumptions are idealizations. In this paper, to understand their impact, we perform a parametric study which quantifies the scattering effects of ambient flow, local-scale dispersion, and velocity field heterogeneity on push-pull breakthrough curves and compares them to the effects of mobile-immobile mass transfer (MIMT) processes including sorption and diffusion into secondary porosity. We identify specific circumstances in which MIMT overwhelmingly determines the breakthrough curve, which may then be considered uninformative about drift and local-scale dispersion. Assuming path reversibility, wemore » develop a continuous-time-random-walk-based interpretation framework which is flow-field-agnostic and well suited to quantifying MIMT. Adopting this perspective, we show that the radial flow assumption is often harmless: to the extent that solute paths are reversible, the breakthrough curve is uninformative about velocity field heterogeneity. Our interpretation method determines a mapping function (i.e., subordinator) from travel time in the absence of MIMT to travel time in its presence. A mathematical theory allowing this function to be directly “plugged into” an existing Laplace-domain transport model to incorporate MIMT is presented and demonstrated. Algorithms implementing the calibration are presented and applied to interpretation of data from a push-pull test performed in a heterogeneous environment. A successful four-parameter fit is obtained, of comparable fidelity to one obtained using a million-node 3-D numerical model. In conclusion, we demonstrate analytically and numerically how push-pull tests quantifying MIMT are sensitive to remobilization, but not immobilization, kinetics.« less

Scapular kinematics and shoulder elevation in a traditional push-up.

PubMed

Suprak, David N; Bohannon, Jennifer; Morales, Gabriel; Stroschein, Joseph; San Juan, Jun G

2013-01-01

Proper scapulothoracic motion is critical for the health and function of the shoulder and represents a principal focus in the rehabilitation setting. Variants of the traditional push-up are used frequently to help restore proper scapular kinematics. To date, substantial research has focused on muscle activation levels of rotator cuff and scapular-stabilizing musculature, whereas a dearth of literature exists regarding scapular kinematics during push-up variants. To examine the effect of shoulder position on scapular kinematics across the range of motion (ROM) of a traditional push-up. Cross-sectional study. University laboratory. Sixteen healthy participants without a history of upper extremity or spine injury requiring rehabilitation or surgery. Participants performed a traditional push-up while kinematic measurements were acquired from multiple upper extremity segments. The 3 shoulder position conditions were (1) self-selected position, (2) shoulder adducted upon ascent (at side), and (3) shoulder elevated to approximately 90°. Scapular posterior tilt, upward rotation, and external rotation were examined across elbow-extension ROM and compared across conditions. Posterior tilt was greater in the self-selected and at-side conditions than in the elevated condition and increased linearly with elbow extension. External rotation was greater in the self-selected and at-side conditions compared with that in the elevated condition. In the at-side condition, upward rotation began lower than in the other conditions at the start of the concentric phase but increased above the others soon after the elbow started to extend. Performing a traditional push-up with the shoulders elevated may place the scapula in a position of impingement. Clinicians should be cognizant of shoulder elevation when prescribing and monitoring exercise progression. The results of this study will provide further direction for clinicians in prescribing rehabilitation exercises for the upper extremity, especially closed chain exercises for shoulder conditions.

An investigation of rugby scrimmaging posture and individual maximum pushing force.

PubMed

Wu, Wen-Lan; Chang, Jyh-Jong; Wu, Jia-Hroung; Guo, Lan-Yuen

2007-02-01

Although rugby is a popular contact sport and the isokinetic muscle torque assessment has recently found widespread application in the field of sports medicine, little research has examined the factors associated with the performance of game-specific skills directly by using the isokinetic-type rugby scrimmaging machine. This study is designed to (a) measure and observe the differences in the maximum individual pushing forward force produced by scrimmaging in different body postures (3 body heights x 2 foot positions) with a self-developed rugby scrimmaging machine and (b) observe the variations in hip, knee, and ankle angles at different body postures and explore the relationship between these angle values and the individual maximum pushing force. Ten national rugby players were invited to participate in the examination. The experimental equipment included a self-developed rugby scrimmaging machine and a 3-dimensional motion analysis system. Our results showed that the foot positions (parallel and nonparallel foot positions) do not affect the maximum pushing force; however, the maximum pushing force was significantly lower in posture I (36% body height) than in posture II (38%) and posture III (40%). The maximum forward force in posture III (40% body height) was also slightly greater than for the scrum in posture II (38% body height). In addition, it was determined that hip, knee, and ankle angles under parallel feet positioning are factors that are closely negatively related in terms of affecting maximum pushing force in scrimmaging. In cross-feet postures, there was a positive correlation between individual forward force and hip angle of the rear leg. From our results, we can conclude that if the player stands in an appropriate starting position at the early stage of scrimmaging, it will benefit the forward force production.

Spin precession experiments for light axionic dark matter

NASA Astrophysics Data System (ADS)

Graham, Peter W.; Kaplan, David E.; Mardon, Jeremy; Rajendran, Surjeet; Terrano, William A.; Trahms, Lutz; Wilkason, Thomas

2018-03-01

Axionlike particles are promising candidates to make up the dark matter of the Universe, but it is challenging to design experiments that can detect them over their entire allowed mass range. Dark matter in general, and, in particular, axionlike particles and hidden photons, can be as light as roughly 10-22 eV (˜10-8 Hz ), with astrophysical anomalies providing motivation for the lightest masses ("fuzzy dark matter"). We propose experimental techniques for direct detection of axionlike dark matter in the mass range from roughly 10-13 eV (˜102 Hz ) down to the lowest possible masses. In this range, these axionlike particles act as a time-oscillating magnetic field coupling only to spin, inducing effects such as a time-oscillating torque and periodic variations in the spin-precession frequency with the frequency and direction of these effects set by the axion field. We describe how these signals can be measured using existing experimental technology, including torsion pendulums, atomic magnetometers, and atom interferometry. These experiments demonstrate a strong discovery capability, with future iterations of these experiments capable of pushing several orders of magnitude past current astrophysical bounds.

Current status of endovascular catheter robotics.

PubMed

Lumsden, Alan B; Bismuth, Jean

2018-06-01

In this review, we will detail the evolution of endovascular therapy as the basis for the development of catheter-based robotics. In parallel, we will outline the evolution of robotics in the surgical space and how the convergence of technology and the entrepreneurs who push this evolution have led to the development of endovascular robots. The current state-of-the-art and future directions and potential are summarized for the reader. Information in this review has been drawn primarily from our personal clinical and preclinical experience in use of catheter robotics, coupled with some ground-breaking work reported from a few other major centers who have embraced the technology's capabilities and opportunities. Several case studies demonstrating the unique capabilities of a precisely controlled catheter are presented. Most of the preclinical work was performed in the advanced imaging and navigation laboratory. In this unique facility, the interface of advanced imaging techniques and robotic guidance is being explored. Although this procedure employs a very high-tech approach to navigation inside the endovascular space, we have conveyed the kind of opportunities that this technology affords to integrate 3D imaging and 3D control. Further, we present the opportunity of semi-autonomous motion of these devices to a target. For the interventionist, enhanced precision can be achieved in a nearly radiation-free environment.

Microengineered cell and tissue systems for drug screening and toxicology applications: Evolution of in-vitro liver technologies

PubMed Central

Usta, O. B.; McCarty, W. J.; Bale, S.; Hegde, M.; Jindal, R.; Bhushan, A.; Golberg, I.; Yarmush, M. L.

2015-01-01

The liver performs many key functions, the most prominent of which is serving as the metabolic hub of the body. For this reason, the liver is the focal point of many investigations aimed at understanding an organism’s toxicological response to endogenous and exogenous challenges. Because so many drug failures have involved direct liver toxicity or other organ toxicity from liver generated metabolites, the pharmaceutical industry has constantly sought superior, predictive in-vitro models that can more quickly and efficiently identify problematic drug candidates before they incur major development costs, and certainly before they are released to the public. In this broad review, we present a survey and critical comparison of in-vitro liver technologies along a broad spectrum, but focus on the current renewed push to develop “organs-on-a-chip”. One prominent set of conclusions from this review is that while a large body of recent work has steered the field towards an ever more comprehensive understanding of what is needed, the field remains in great need of several key advances, including establishment of standard characterization methods, enhanced technologies that mimic the in-vivo cellular environment, and better computational approaches to bridge the gap between the in-vitro and in-vivo results. PMID:26167518

Personal Development Planner

NASA Astrophysics Data System (ADS)

Vogten, Hubert; Martens, Harrie

We are facing many ever changing and increasing learning needs in our information society. Society is changing at an increasing pace, constantly pushed forward by emerging new information and communication technologies. New and changing demands of society on the individual, both on and off the job, are following these technological changes in a similar pace. In just one generation, information and communications technologies have revolutionised the way we live, learn, work and play. As a result, technical skills, communication skills, knowledge, in short competences are quickly outdated and require constant updating. Jobs for a lifetime have become the exception and are in fact considered undesirable by both the employer and the employee. Therefore, the traditional approach towards learning, which mainly took place during very specific stages of someone’s life, has been replaced by the idea of professional development. The information society has also lead to more active and involved society members, who are increasingly more demanding regarding their personal goals and developments. Individuals are regularly confronted with question such as: are my competences still up-to-date?; is my current job still satisfying and challenging enough?; in what directions can I change my career?; can I improve myself?; what other opportunities do I have? These types of question are not necessarily work related, although they often are.

Hydrostratigraphic analysis of the MADE site with full-resolution GPR and direct-push hydraulic profiling

USGS Publications Warehouse

Dogan, M.; Van Dam, R. L.; Bohling, Geoffrey C.; Butler, J.J.; Hyndman, D.W.

2011-01-01

Full-resolution 3D Ground-Penetrating Radar (GPR) data were combined with high-resolution hydraulic conductivity (K) data from vertical Direct-Push (DP) profiles to characterize a portion of the highly heterogeneous MAcro Dispersion Experiment (MADE) site. This is an important first step to better understand the influence of aquifer heterogeneities on observed anomalous transport. Statistical evaluation of DP data indicates non-normal distributions that have much higher similarity within each GPR facies than between facies. The analysis of GPR and DP data provides high-resolution estimates of the 3D geometry of hydrostratigraphic zones, which can then be populated with stochastic K fields. The lack of such estimates has been a significant limitation for testing and parameterizing a range of novel transport theories at sites where the traditional advection-dispersion model has proven inadequate. ?? 2011 by the American Geophysical Union.

Partial removal of correlated noise in thermal imagery

NASA Astrophysics Data System (ADS)

Borel, Christoph C.; Cooke, Bradly J.; Laubscher, Bryan E.

1996-05-01

Correlated noise occurs in many imaging systems such as scanners and push-broom imagers. The sources of correlated noise can be from the detectors, pre-amplifiers and sampling circuits. Correlated noise appears as streaking along the scan direction of a scanner or in the along track direction of a push-broom imager. We have developed algorithms to simulate correlated noise and pre-filter to reduce the amount of streaking while not destroying the scene content. The pre-filter in the Fourier domain consists of the product of two filters. One filter models the correlated noise spectrum, the other is a windowing function, e.g. Gaussian or Hanning window with variable width to block high frequency noise away from the origin of the Fourier Transform of the image data. We have optimized the filter parameters for various scenes and find improvements of the RMS error of the original minus the pre-filtered noisy image.

Who Teaches the "STE" in STEM?

ERIC Educational Resources Information Center

Bartholomew, Scott

2015-01-01

STEM (Science, Technology, Engineering, and Math) is a buzzword in America (Ames, 2013; Woodruff, 2013). With recent pushes from the federal government (Obama, 2013) the educational landscape is changing, with an increased emphasis on STEM (Noddings, 2013; Obama, 2013). However, a clear definition of who teaches each aspect of STEM does not exist…

Understanding Library Space Planning

ERIC Educational Resources Information Center

Gstalder, Steven Herbert

2017-01-01

The role of the academic library has shifted from developing book collections to serving the information and technology needs of students and faculty. The needs of library users change more quickly and unpredictably than the needs of books, and library directors have pushed beyond the traditional incremental approach to library development to…

75 FR 40851 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Connected Media...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-14

... of antitrust plaintiffs to actual damages under specified circumstances. Specifically, Warner Music Group, New York, NY; Push Entertainment LTD., Bath, UNITED KINGDOM; MOD Systems Incorporated, Seattle, WA; PacketVideo Corporation, San Diego, CA; BACH Technology AS, Bergen, NORWAY; Sony Corporation of...

Understanding STEM: Current Perceptions

ERIC Educational Resources Information Center

Brown, Ryan; Brown, Joshua; Reardon, Kristin; Merrill, Chris

2011-01-01

In many ways, the push for STEM (science, technology, engineering, and mathematics) education appears to have grown from a concern for the low number of future professionals to fill STEM jobs and careers and economic and educational competitiveness. The proponents of STEM education believe that by increasing math and science requirements in…

Industrial Arts/Technology: What Are We Doing?

ERIC Educational Resources Information Center

Howlett, James; Huff, Brad

2007-01-01

The push to prepare all students for college has resulted in the near disappearance of high school industrial arts courses. This trend is exemplified by California high schools' adherence to the University of California and California State University systems' prescribed courses, called the "A to G" requirements, which students must take…

Romanians Abroad: A Snapshot of Highly Skilled Migration

ERIC Educational Resources Information Center

Ferro, Anna

2004-01-01

This paper is about the experience of labour migration among skilled Romanians, mainly Information Technology workers and highly qualified researchers. It is based on a questionnaire survey where, among other elements, the researcher investigated the push-pull aspects of qualified migration and the strategies of labour migration. This paper…

Emerging Scholars

ERIC Educational Resources Information Center

Anyaso, Hilary Hurd; Rolo, Mark Anthony; Roach, Ronald; Delos, Robin Chen; Branch-Brioso, Karen; Miranda, Maria Eugenia; Seymour, Add, Jr.; Grossman, Wendy; Nealy, Michelle J.; Lum, Lydia

2009-01-01

This year's group of "emerging scholars" is a force to be reckoned with. This diverse group of young (under-40) crusaders is pushing the boundaries of research, technology and public policy in ways never imagined and reaching new heights of accomplishments. The Class of 2009 includes a physiologist who devised an artificial pancreas to produce the…

Preparing the Future STEM Workforce for Diverse Environments

ERIC Educational Resources Information Center

Daily, Shaundra Bryant; Eugene, Wanda

2013-01-01

Following the belief that diversity breeds innovation in scientific endeavors, there is a national push for more diversity in the science, technology, engineering, and mathematics (STEM) workforce in order to maintain national economic competitiveness. Currently, STEM-related employment is only 28% non-White; however, greater efforts to recruit…

Tough Times Push More Small Colleges to Join Forces

ERIC Educational Resources Information Center

Carlson, Scott

2013-01-01

The author reports on how colleges could work together more closely in areas like the library, the colleges' technology infrastructure, human resources and payroll, and, ultimately, their academic programs. Higher education has some famous collaborations--the best-known among them are the Claremont Colleges, where seven institutions, each with a…

Holistic Development of Computer Engineering Curricula Using Y-Chart Methodology

ERIC Educational Resources Information Center

Rashid, Muhammad; Tasadduq, Imran A.

2014-01-01

The exponential growth of advancing technologies is pushing curriculum designers in computer engineering (CpE) education to compress more and more content into the typical 4-year program, without necessarily paying much attention to the cohesiveness of those contents. The result has been highly fragmented curricula consisting of various…

Making Science Appeal to Girls

ERIC Educational Resources Information Center

McCrea, Bridget

2011-01-01

It is no secret that many girls seem disinterested in science, technology, engineering, and mathematics (STEM), but strategies for building their interest are sometimes elusive. Because STEM career paths are not always perceived as "natural" for women, educators do no't always push their female students to explore these educational areas. As a…

Brazilian cuts put projects in peril

NASA Astrophysics Data System (ADS)

José Lopes, Reinaldo

2015-10-01

The soap opera surrounding Brazil's participation in the European Southern Observatory (ESO) has taken another twist after the Ministry of Science, Technology and Innovation said that the government is still “considering” what to do, even though physicist Sérgio Rezende - a former science minister - was behind the push for Brazilian membership.

The Science of Green

ERIC Educational Resources Information Center

Cekauskas, Raymond; Hartmann, Mark

2009-01-01

When one considers the enormous cost of science laboratory buildings, it is no surprise that the stream of environmental consciousness that has swept through campuses has had a profound effect on the design and engineering of these complex buildings. Advancing technologies, government regulations and rising energy costs all are driving the push to…

Do We Need to Design Course-Based Undergraduate Research Experiences for Authenticity?

ERIC Educational Resources Information Center

Rowland, Susan; Pedwell, Rhianna; Lawrie, Gwen; Lovie-Toon, Joseph; Hung, Yu

2016-01-01

The recent push for more authentic teaching and learning in science, technology, engineering, and mathematics indicates a shared agreement that undergraduates require greater exposure to professional practices. There is considerable variation, however, in how "authentic" science education is defined. In this paper we present our…

Conflicts in Developing an Elementary STEM Magnet School

ERIC Educational Resources Information Center

Sikma, Lynn; Osborne, Margery

2014-01-01

Elementary schools in the United States have been the terrain of a highly politicized push for improved reading and mathematics attainment, as well as calls for increased importance to be given to science, technology, engineering, and mathematics (STEM). With priorities placed on basic skills, however, instructional time in subjects such as…

21st Century Senior Leader Education: Ubiquitous Open Access Learning Environment

DTIC Science & Technology

2011-02-22

Failures: It‘s the content, stupid ‖22 because agencies focus on systems rather than substance and access to the content is critical. The access to Army...Resource Capabilities. 18 As an example to demonstrate how a civilian capability provides learning value to the PLE, the ― Google Alerts‖ ® web...technology pushed content to the author for review in the development of this paper. The technology consists of a user creating a Google account, logging

Absolute calibration of the Agfa Structurix series films at energies between 2.7 and 6.2 keV.

PubMed

Lanier, N E; Cowan, J S

2014-11-01

Although photo-emulsion technology is many decades old, x-ray film still remains a key asset for diagnosing hydrodynamic features in High-Energy Density (HED) experiments. For decades, the preferred option had been Kodak's direct exposure film. After its discontinuance in 2004, the push to find alternatives began. In many situations, the Agfa Structurix series offers the most favorable substitute, but being new to the HED community, its characterization was lacking. To remedy this, recent experiments, conducted at Brookhaven's National Synchrotron Light Source, provide absolute, monochromatic calibration data for the Agfa Structurix series films at K-shell backlighter energies between 2.7 and 6.2 keV. Absolute response curves are presented for Agfa D8, D7, D4, D4sc, D3, and D2. Moreover, the transmission of each film type is also measured.

Advanced Communications Architecture Demonstration Made Significant Progress

NASA Technical Reports Server (NTRS)

Carek, David Andrew

2004-01-01

Simulation for a ground station located at 44.5 deg latitude. The Advanced Communications Architecture Demonstration (ACAD) is a concept architecture to provide high-rate Ka-band (27-GHz) direct-to-ground delivery of payload data from the International Space Station. This new concept in delivering data from the space station targets scientific experiments that buffer data onboard. The concept design provides a method to augment the current downlink capability through the Tracking Data Relay Satellite System (TDRSS) Ku-band (15-GHz) communications system. The ACAD concept pushes the limits of technology in high-rate data communications for space-qualified systems. Research activities are ongoing in examining the various aspects of high-rate communications systems including: (1) link budget parametric analyses, (2) antenna configuration trade studies, (3) orbital simulations (see the preceding figure), (4) optimization of ground station contact time (see the following graph), (5) processor and storage architecture definition, and (6) protocol evaluations and dependencies.

Absolute calibration of the Agfa Structurix series films at energies between 2.7 and 6.2 keVa)

NASA Astrophysics Data System (ADS)

Lanier, N. E.; Cowan, J. S.

2014-11-01

Although photo-emulsion technology is many decades old, x-ray film still remains a key asset for diagnosing hydrodynamic features in High-Energy Density (HED) experiments. For decades, the preferred option had been Kodak's direct exposure film. After its discontinuance in 2004, the push to find alternatives began. In many situations, the Agfa Structurix series offers the most favorable substitute, but being new to the HED community, its characterization was lacking. To remedy this, recent experiments, conducted at Brookhaven's National Synchrotron Light Source, provide absolute, monochromatic calibration data for the Agfa Structurix series films at K-shell backlighter energies between 2.7 and 6.2 keV. Absolute response curves are presented for Agfa D8, D7, D4, D4sc, D3, and D2. Moreover, the transmission of each film type is also measured.

Advancing Autonomous Operations Technologies for NASA Missions

NASA Technical Reports Server (NTRS)

Cruzen, Craig; Thompson, Jerry Todd

2013-01-01

This paper discusses the importance of implementing advanced autonomous technologies supporting operations of future NASA missions. The ability for crewed, uncrewed and even ground support systems to be capable of mission support without external interaction or control has become essential as space exploration moves further out into the solar system. The push to develop and utilize autonomous technologies for NASA mission operations stems in part from the need to reduce operations cost while improving and increasing capability and safety. This paper will provide examples of autonomous technologies currently in use at NASA and will identify opportunities to advance existing autonomous technologies that will enhance mission success by reducing operations cost, ameliorating inefficiencies, and mitigating catastrophic anomalies.

Universality of accelerating change

NASA Astrophysics Data System (ADS)

Eliazar, Iddo; Shlesinger, Michael F.

2018-03-01

On large time scales the progress of human technology follows an exponential growth trend that is termed accelerating change. The exponential growth trend is commonly considered to be the amalgamated effect of consecutive technology revolutions - where the progress carried in by each technology revolution follows an S-curve, and where the aging of each technology revolution drives humanity to push for the next technology revolution. Thus, as a collective, mankind is the 'intelligent designer' of accelerating change. In this paper we establish that the exponential growth trend - and only this trend - emerges universally, on large time scales, from systems that combine together two elements: randomness and amalgamation. Hence, the universal generation of accelerating change can be attained by systems with no 'intelligent designer'.

Advancing Autonomous Operations Technologies for NASA Missions

NASA Technical Reports Server (NTRS)

Cruzen, Craig; Thompson, Jerry T.

2013-01-01

This paper discusses the importance of implementing advanced autonomous technologies supporting operations of future NASA missions. The ability for crewed, uncrewed and even ground support systems to be capable of mission support without external interaction or control has become essential as space exploration moves further out into the solar system. The push to develop and utilize autonomous technologies for NASA mission operations stems in part from the need to reduce cost while improving and increasing capability and safety. This paper will provide examples of autonomous technologies currently in use at NASA and will identify opportunities to advance existing autonomous technologies that will enhance mission success by reducing cost, ameliorating inefficiencies, and mitigating catastrophic anomalies

Evaluation of subsurface exploration, sampling, and water-quality-analysis methods at an abandoned wood-preserving plant site at Jackson, Tennessee

USGS Publications Warehouse

Parks, W.S.; Carmichael, J.K.; Mirecki, J.E.

1993-01-01

Direct Push Technology (DPT) and a modified-auger method of sampling were used at an abandoned wood-preserving plant site at Jackson, Tennessee, to collect lithologic data and ground-water samples in an area known to be affected by a subsurface creosote plume. The groundwater samples were analyzed using (1) gas chromatography with photo-ionization detection (GS/PID), (2) high- performance liquid chromatography (HPLC), (3) colonmetric phenol analysis, and (4) toxicity bioassay. DPT piezocone and cone-penetrometer-type tools provided lithologic data and ground-water samples at two onsite stations to a depth of refusal of about 35 feet below land surface. With the assistance of an auger rig, this depth was extended to about 65 feet by pushing the tools in advance of the augers. Following the DPT work, a modified-auger method was tested by the USGS. This method left doubt as to the integrity of the samples collected once zones of contamination were penetrated. GC/PID and HPLC methods of water-quality analysis provided the most data concerning contaminants in the ground-water and proved to be the most effective in creosote plume detection. Analyses from these methods showed that the highest concentrations of contaminants were detected at depths less than about 35 feet below land surface. Phenol analyses provided data supplemental to the HPLC analyses. Bioassay data indicated that toxicity associated with the plume extended to depths of about 55 feet below land surface.

Direct Bullying: Criminal Act or Mimicking What Has Been Learned?

ERIC Educational Resources Information Center

Garby, Lisa

2013-01-01

Bullying has been around for ages, but in the past decade it has been in the spotlight because of suicidal deaths and a push for legislation to put these bullies behind bars. Numerous national surveys report that a large percentage of bullying in schools is a form of direct bullying. Recently all but one state has now enacted harsher anti-bullying…

Changes and Challenges in the Flow of International Human Capital: China's Experience

ERIC Educational Resources Information Center

Pan, Su-Yan

2010-01-01

This article tracks the changes in the directions of the international flow of Chinese human capital between the 1870s and 2000s. Although many studies on international academic flow adopt the pull-and-push approach, this article argues that the direction of human capital flow is not determined solely by an individual's choice when faced with a…

Fast Shear Compounding Using Robust Two-dimensional Shear Wave Speed Calculation and Multi-directional Filtering

PubMed Central

Song, Pengfei; Manduca, Armando; Zhao, Heng; Urban, Matthew W.; Greenleaf, James F.; Chen, Shigao

2014-01-01

A fast shear compounding method was developed in this study using only one shear wave push-detect cycle, such that the shear wave imaging frame rate is preserved and motion artifacts are minimized. The proposed method is composed of the following steps: 1. applying a comb-push to produce multiple differently angled shear waves at different spatial locations simultaneously; 2. decomposing the complex shear wave field into individual shear wave fields with differently oriented shear waves using a multi-directional filter; 3. using a robust two-dimensional (2D) shear wave speed calculation to reconstruct 2D shear elasticity maps from each filter direction; 4. compounding these 2D maps from different directions into a final map. An inclusion phantom study showed that the fast shear compounding method could achieve comparable performance to conventional shear compounding without sacrificing the imaging frame rate. A multi-inclusion phantom experiment showed that the fast shear compounding method could provide a full field-of-view (FOV), 2D, and compounded shear elasticity map with three types of inclusions clearly resolved and stiffness measurements showing excellent agreement to the nominal values. PMID:24613636

Perineal injury associated with hands on/hands poised and directed/undirected pushing: A retrospective cross-sectional study of non-operative vaginal births, 2011-2016.

PubMed

Lee, Nigel; Firmin, Meaghan; Gao, Yu; Kildea, Sue

2018-07-01

Clinicians hand position and advised pushing techniques may impact on rates of perineal injury. To assess the association of four techniques used in management of second stage with risk of moderate and severe perineal injury. Retrospective cross-sectional study. A metropolitan maternity hospital and a private maternity hospital in Brisbane, Australia. Term women with singleton, cephalic presentation experiencing a non-operative vaginal birth from January 2011 to December 2016. The research sites perinatal database recorded data on clinicians approach to instructing women during second stage and hand position at birth. Women were identified from matching the inclusion criteria (n = 26,393) then grouped based on combinations of hands-on, hand- poised, directed and undirected pushing. The associations with perineal injury were estimated using odds ratios obtained by multivariate analysis. Primary outcomes were the risk of moderate and severe perineal injury. The significance was set at 0.001. In Nulliparous women there was no difference in the risk of moderate or severe perineal injury between the different techniques. In multiparous women the use of a hands-on/directed approach was associated with a significant increase in the risk of moderate (AOR 1.18, 95% CI 1.10-1.27, p < 0.001) and severe perineal injury (AOR 1.50, 95% CI 1.20-1.88, p < 0.001) compared to hands-poised/undirected. A hands poised/undirected approach could be utilised in strategies for the prevention of moderate and severe perineal injury. Copyright © 2018 Elsevier Ltd. All rights reserved.

High resolution aquifer characterization using crosshole GPR full-waveform tomography: Comparison with direct-push and tracer test data

NASA Astrophysics Data System (ADS)

Gueting, Nils; Vienken, Thomas; Klotzsche, Anja; van der Kruk, Jan; Vanderborght, Jan; Caers, Jef; Vereecken, Harry; Englert, Andreas

2017-01-01

Limited knowledge about the spatial distribution of aquifer properties typically constrains our ability to predict subsurface flow and transport. Here we investigate the value of using high resolution full-waveform inversion of cross-borehole ground penetrating radar (GPR) data for aquifer characterization. By stitching together GPR tomograms from multiple adjacent crosshole planes, we are able to image, with a decimeter scale resolution, the dielectric permittivity and electrical conductivity of an alluvial aquifer along cross sections of 50 m length and 10 m depth. A logistic regression model is employed to predict the spatial distribution of lithological facies on the basis of the GPR results. Vertical profiles of porosity and hydraulic conductivity from direct-push, flowmeter and grain size data suggest that the GPR predicted facies classification is meaningful with regard to porosity and hydraulic conductivity, even though the distributions of individual facies show some overlap and the absolute hydraulic conductivities from the different methods (direct-push, flowmeter, grain size) differ up to approximately one order of magnitude. Comparison of the GPR predicted facies architecture with tracer test data suggests that the plume splitting observed in a tracer experiment was caused by a hydraulically low-conductive sand layer with a thickness of only a few decimeters. Because this sand layer is identified by GPR full-waveform inversion but not by conventional GPR ray-based inversion we conclude that the improvement in spatial resolution due to full-waveform inversion is crucial to detect small-scale aquifer structures that are highly relevant for solute transport.

Permeability profiles in granular aquifers using flowmeters in direct-push wells

USGS Publications Warehouse

Paradis, D.; Lefebvre, R.; Morin, R.H.; Gloaguen, E.

2010-01-01

Numerical hydrogeological models should ideally be based on the spatial distribution of hydraulic conductivity (K), a property rarely defined on the basis of sufficient data due to the lack of efficient characterization methods. Electromagnetic borehole flowmeter measurements during pumping in uncased wells can effectively provide a continuous vertical distribution of K in consolidated rocks. However, relatively few studies have used the flowmeter in screened wells penetrating unconsolidated aquifers, and tests conducted in gravel-packed wells have shown that flowmeter data may yield misleading results. This paper describes the practical application of flowmeter profiles in direct-push wells to measure K and delineate hydrofacies in heterogeneous unconsolidated aquifers having low-to-moderate K (10−6 to 10−4 m/s). The effect of direct-push well installation on K measurements in unconsolidated deposits is first assessed based on the previous work indicating that such installations minimize disturbance to the aquifer fabric. The installation and development of long-screen wells are then used in a case study validating Kprofiles from flowmeter tests at high-resolution intervals (15 cm) with K profiles derived from multilevel slug tests between packers at identical intervals. For 119 intervals tested in five different wells, the difference in log K values obtained from the two methods is consistently below 10%. Finally, a graphical approach to the interpretation of flowmeter profiles is proposed to delineate intervals corresponding to distinct hydrofacies, thus providing a method whereby both the scale and magnitude of K contrasts in heterogeneous unconsolidated aquifers may be represented.

Permeability profiles in granular aquifers using flowmeters in direct-push wells.

PubMed

Paradis, Daniel; Lefebvre, René; Morin, Roger H; Gloaguen, Erwan

2011-01-01

Numerical hydrogeological models should ideally be based on the spatial distribution of hydraulic conductivity (K), a property rarely defined on the basis of sufficient data due to the lack of efficient characterization methods. Electromagnetic borehole flowmeter measurements during pumping in uncased wells can effectively provide a continuous vertical distribution of K in consolidated rocks. However, relatively few studies have used the flowmeter in screened wells penetrating unconsolidated aquifers, and tests conducted in gravel-packed wells have shown that flowmeter data may yield misleading results. This paper describes the practical application of flowmeter profiles in direct-push wells to measure K and delineate hydrofacies in heterogeneous unconsolidated aquifers having low-to-moderate K (10(-6) to 10(-4) m/s). The effect of direct-push well installation on K measurements in unconsolidated deposits is first assessed based on the previous work indicating that such installations minimize disturbance to the aquifer fabric. The installation and development of long-screen wells are then used in a case study validating K profiles from flowmeter tests at high-resolution intervals (15 cm) with K profiles derived from multilevel slug tests between packers at identical intervals. For 119 intervals tested in five different wells, the difference in log K values obtained from the two methods is consistently below 10%. Finally, a graphical approach to the interpretation of flowmeter profiles is proposed to delineate intervals corresponding to distinct hydrofacies, thus providing a method whereby both the scale and magnitude of K contrasts in heterogeneous unconsolidated aquifers may be represented. Journal compilation © 2010 National Ground Water Association. No claim to original US government works.

Transformation from a Single Antenna to a Series Array Using Push/Pull Origami

PubMed Central

Shah, Syed Imran Hussain

2017-01-01

We propose a push/pull origami antenna, transformable between a single antenna element and a three-element array. In limited space, the proposed origami antenna can work as a single antenna. When the space is not limited and a higher gain is required, the proposed origami antenna can be transformed to a series antenna array by pulling the frame. In order to push the antenna array back to a single antenna, the frame for each antenna element size must be different. The frame and supporting dielectric materials are built using a three-dimensional (3D) printer. The conductive patterns are inkjet-printed on paper. Thus, the proposed origami antenna is built using hybrid printing technology. The 10-dB impedance bandwidth is 2.5–2.65 GHz and 2.48–2.62 GHz for the single-antenna and array mode, respectively, and the peak gains in the single-antenna and array mode are 5.8 dBi and 7.6 dBi, respectively. The proposed antenna can be used for wireless remote-sensing applications. PMID:28846603

Transformation from a Single Antenna to a Series Array Using Push/Pull Origami.

PubMed

Shah, Syed Imran Hussain; Lim, Sungjoon

2017-08-26

We propose a push/pull origami antenna, transformable between a single antenna element and a three-element array. In limited space, the proposed origami antenna can work as a single antenna. When the space is not limited and a higher gain is required, the proposed origami antenna can be transformed to a series antenna array by pulling the frame. In order to push the antenna array back to a single antenna, the frame for each antenna element size must be different. The frame and supporting dielectric materials are built using a three-dimensional (3D) printer. The conductive patterns are inkjet-printed on paper. Thus, the proposed origami antenna is built using hybrid printing technology. The 10-dB impedance bandwidth is 2.5-2.65 GHz and 2.48-2.62 GHz for the single-antenna and array mode, respectively, and the peak gains in the single-antenna and array mode are 5.8 dBi and 7.6 dBi, respectively. The proposed antenna can be used for wireless remote-sensing applications.

Coil spring venting arrangement

DOEpatents

McCugh, R.M.

1975-10-21

A simple venting device for trapped gas pockets in hydraulic systems is inserted through a small access passages, operated remotely, and removed completely. The device comprises a small diameter, closely wound coil spring which is pushed through a guide temporarily inserted in the access passage. The guide has a central passageway which directs the coil spring radially upward into the pocket, so that, with the guide properly positioned for depth and properly oriented, the coil spring can be pushed up into the top of the pocket to vent it. By positioning a seal around the free end of the guide, the spring and guide are removed and the passage is sealed.

Pressure flaking to serrate bifacial points for the hunt during the MIS5 at Sibudu Cave (South Africa)

PubMed Central

Lentfer, Carol; Schmid, Viola C.; Porraz, Guillaume; Conard, Nicholas J.

2017-01-01

Projectile technology is considered to appear early in the southern African Middle Stone Age (MSA) and the rich and high resolution MSA sequence of Sibudu Cave in KwaZulu-Natal has provided many new insights about the use and hafting of various projectile forms. We present the results of a functional and technological analysis on a series of unpublished serrated bifacial points recently recovered from the basal deposits of Sibudu Cave. These serrated tools, which only find equivalents in the neighbouring site of Umhlatuzana, precede the Still Bay techno-complex and are older than 77 ka BP. Independent residue and use-wear analyses were performed in a phased procedure involving two separate analysts, which allowed the engagement between two separate lines of functional evidence. Thanks to the excellent preservation at Sibudu Cave, a wide range of animal, plant and mineral residues were observed in direct relation with diagnostic wear patterns. The combination of technological, wear and residue evidence allowed us to confirm that the serration was manufactured with bone compressors and that the serrated points were mounted with a composite adhesive as the tips of projectiles used in hunting activities. The suite of technological and functional data pushes back the evidence for the use of pressure flaking during the MSA and highlights the diversity of the technical innovations adopted by southern African MSA populations. We suggest the serrated points from the stratigraphic units Adam to Darya of Sibudu illustrate one important technological adaptation of the southern African MSA and provide another example of the variability of MSA bifacial technologies. PMID:28445544

Pressure flaking to serrate bifacial points for the hunt during the MIS5 at Sibudu Cave (South Africa).

PubMed

Rots, Veerle; Lentfer, Carol; Schmid, Viola C; Porraz, Guillaume; Conard, Nicholas J

2017-01-01

Projectile technology is considered to appear early in the southern African Middle Stone Age (MSA) and the rich and high resolution MSA sequence of Sibudu Cave in KwaZulu-Natal has provided many new insights about the use and hafting of various projectile forms. We present the results of a functional and technological analysis on a series of unpublished serrated bifacial points recently recovered from the basal deposits of Sibudu Cave. These serrated tools, which only find equivalents in the neighbouring site of Umhlatuzana, precede the Still Bay techno-complex and are older than 77 ka BP. Independent residue and use-wear analyses were performed in a phased procedure involving two separate analysts, which allowed the engagement between two separate lines of functional evidence. Thanks to the excellent preservation at Sibudu Cave, a wide range of animal, plant and mineral residues were observed in direct relation with diagnostic wear patterns. The combination of technological, wear and residue evidence allowed us to confirm that the serration was manufactured with bone compressors and that the serrated points were mounted with a composite adhesive as the tips of projectiles used in hunting activities. The suite of technological and functional data pushes back the evidence for the use of pressure flaking during the MSA and highlights the diversity of the technical innovations adopted by southern African MSA populations. We suggest the serrated points from the stratigraphic units Adam to Darya of Sibudu illustrate one important technological adaptation of the southern African MSA and provide another example of the variability of MSA bifacial technologies.

The Comprehensible Output Hypothesis and Self-directed Learning: A Learner's Perspective.

ERIC Educational Resources Information Center

Liming, Yu

1990-01-01

Discusses the significance to language acquisition of pushing for comprehensible output. Three issues are examined: (1) comprehensible output and negative input, (2) comprehensible and incomprehensible output, and (3) comprehensible output and comprehensible input. (28 references) (GLR)

Delineation of contaminant plume for an inorganic contaminated site using electrical resistivity tomography: comparison with direct-push technique.

PubMed

Liao, Qing; Deng, Yaping; Shi, Xiaoqing; Sun, Yuanyuan; Duan, Weidong; Wu, Jichun

2018-03-03

Precise delineation of contaminant plume distribution is essential for effective remediation of contaminated sites. Traditional in situ investigation methods like direct-push (DP) sampling are accurate, but are usually intrusive and costly. Electrical resistivity tomography (ERT) method, as a non-invasive geophysical technique to map spatiotemporal changes in resistivity of the subsurface, is becoming increasingly popular in environmental science. However, the resolution of ERT for delineation of contaminant plumes still remains controversial. In this study, ERT and DP technique were both conducted at a real inorganic contaminated site. The reliability of the ERT method was validated by the direct comparisons of their investigation results that the resistivity acquired by ERT method is in accordance with the total dissolved solid concentration in groundwater and the overall variation of the total iron content in soil obtained by DP technique. After testifying the applicability of ERT method for contaminant identification, the extension of contaminant plume at the study site was revealed by supplementary ERT surveys conducted subsequently in the surrounding area of the contaminant source zone.

Toward humanoid robots for operations in complex urban environments

NASA Astrophysics Data System (ADS)

Pratt, Jerry E.; Neuhaus, Peter; Johnson, Matthew; Carff, John; Krupp, Ben

2010-04-01

Many infantry operations in urban environments, such as building clearing, are extremely dangerous and difficult and often result in high casualty rates. Despite the fast pace of technological progress in many other areas, the tactics and technology deployed for many of these dangerous urban operation have not changed much in the last 50 years. While robots have been extremely useful for improvised explosive device (IED) detonation, under-vehicle inspection, surveillance, and cave exploration, there is still no fieldable robot that can operate effectively in cluttered streets and inside buildings. Developing a fieldable robot that can maneuver in complex urban environments is challenging due to narrow corridors, stairs, rubble, doors and cluttered doorways, and other obstacles. Typical wheeled and tracked robots have trouble getting through most of these obstacles. A bipedal humanoid is ideally shaped for many of these obstacles because its legs are long and skinny. Therefore it has the potential to step over large barriers, gaps, rocks, and steps, yet squeeze through narrow passageways, and through narrow doorways. By being able to walk with one foot directly in front of the other, humanoids also have the potential to walk over narrow "balance beam" style objects and can cross a narrow row of stepping stones. We describe some recent advances in humanoid robots, particularly recovery from disturbances, such as pushes and walking over rough terrain. Our disturbance recovery algorithms are based on the concept of Capture Points. An N-Step Capture Point is a point on the ground in which a legged robot can step to in order to stop in N steps. The N-Step Capture Region is the set of all N-Step Capture Points. In order to walk without falling, a legged robot must step somewhere in the intersection between an N-Step Capture Region and the available footholds on the ground. We present results of push recovery using Capture Points on our humanoid robot M2V2.

A Compact, High-Flux Cold Atom Beam Source

NASA Technical Reports Server (NTRS)

Kellogg, James R.; Kohel, James M.; Thompson, Robert J.; Aveline, David C.; Yu, Nan; Schlippert, Dennis

2012-01-01

The performance of cold atom experiments relying on three-dimensional magneto-optical trap techniques can be greatly enhanced by employing a highflux cold atom beam to obtain high atom loading rates while maintaining low background pressures in the UHV MOT (ultra-high vacuum magneto-optical trap) regions. Several techniques exist for generating slow beams of cold atoms. However, one of the technically simplest approaches is a two-dimensional (2D) MOT. Such an atom source typically employs at least two orthogonal trapping beams, plus an additional longitudinal "push" beam to yield maximum atomic flux. A 2D atom source was created with angled trapping collimators that not only traps atoms in two orthogonal directions, but also provides a longitudinal pushing component that eliminates the need for an additional push beam. This development reduces the overall package size, which in turn, makes the 2D trap simpler, and requires less total optical power. The atom source is more compact than a previously published effort, and has greater than an order of magnitude improved loading performance.

Particle Engulfment and Pushing by Solidification Interfaces. Part 1; Ground Experiments

NASA Technical Reports Server (NTRS)

Juretzko, Frank R.; Dhindaw, Brij K.; Stefanescu, Doru M.; Sen, subhayu; Curreri, Peter A.

1998-01-01

Directional solidification experiments have been carried out to determine the pushing/engulfment transition for two different metal/particle systems. The systems chosen were aluminum/zirconia particles and zinc/zirconia particles. Pure metals (99.999% Al and 99.95% Zn) and spherical particles (500 microns in diameter) were used. The particles were non-reactive with the matrices within the temperature range of interest. The experiments were conducted such as to insure a planar solid/liquid interface during solidification. Particle location before and after processing was evaluated by X-ray transmission microscopy for the Al/ZrO2 samples. All samples were characterized by optical metallography after processing. A clear methodology for the experiment evaluation was developed to unambiguously interpret the occurrence of the pushing/engulfment transition. It was found that the critical velocity for engulfment ranges from 1.9 to 2.4 micron/s for Al/ZrO2 and from 1.9 to 2.9 microns/s for Zn/ZrO2.

Particle Engulfment and Pushing by Solidifying Interfaces. Pt. 2; Micro-Gravity Experiments and Theoretical Analysis

NASA Technical Reports Server (NTRS)

Stefanescu, Doru M.; Juretzko, Frank R.; Dhindaw, Brij K.; Catalina, Adrian; Sen, Subhayu; Curreri, Peter A.

1998-01-01

Results of the directional solidification experiments on Particle Engulfment and Pushing by Solidifying Interfaces (PEP) conducted on the space shuttle Columbia during the Life and Microgravity Science Mission are reported. Two pure aluminum (99.999%) 9 mm cylindrical rods, loaded with about 2 vol.% 500 micrometers diameter zirconia particles were melted and resolidified in the microgravity (microg) environment of the shuttle. One sample was processed at step-wise increased solidification velocity, while the other at step-wise decreased velocity. It was found that a pushing-to-engulfment transition (PET) occurred in the velocity range of 0.5 to 1 micrometers. This is smaller than the ground PET velocity of 1.9 to 2.4 micrometers. This demonstrates that natural convection increases the critical velocity. A previously proposed analytical model for PEP was further developed. A major effort to identify and produce data for the surface energy of various interfaces required for calculation was undertaken. The predicted critical velocity for PET was of 0.775 micrometers/s.

2015 Summer Series - Jeremy Vander Kam - Burn to Shine: Experiences and Lessons from the Orion Heat Shield

NASA Image and Video Library

2015-06-25

NASA's mission to push the limits of human exploration to beyond low earth orbit and to Mars will take humans farther than ever before. Achieving these goals requires collaborations and development of new technology. NASA Ames' expertise in re-entry technology is helping develop the architecture to achieve these goals. The Orion Heat Shield is an example of the materials and technology development needed to sustain heating rates far greater than missions returning from the International Space Station. Jeremy Vander Kam describes details working with this engineering and scientific marvel.

Ideas from Future Technologies Workshop Held by ARL/TARDEC in Aberdeen Proving Ground, Maryland on 9-11 June, 1993

DTIC Science & Technology

1994-08-01

goalie moving his stick to block a puck. The first estimates of the predicted impact point may be available around 1 s before impact, and positioning...Innovation thrives in a "technology push" environment, not in a "demand pull " siruation. • Micromanagement is lethal to innovation. • Very few...strongest of "demand pull " conditions imaginable-a management method that reduces innovation. This could be counterbalanced with a strong "Tech Base

Development vs. Deployment: How Mature Should a Technology be Before it is Considered for Inclusion in an Acquisition Program?

DTIC Science & Technology

2007-04-30

surface combatant. Take, for instance, the tumblehome hull design of the new Zumwalt-class destroyer. If some critical issues were to arise with the ...more aggressive target is selected, there will be a greater increase in capability for each new system deployed. However, the expected duration of...push for the most advanced technology they can get into each new system. • This behavior exacerbates the problem and leads to even longer acquisition

Adding value in additive manufacturing: researchers in the United Kingdom and Europe look to 3D printing for customization.

PubMed

Banks, Jim

2013-01-01

Having already made a big impact in the medical sector, three-dimensional (3-D) printing technology continues to push the boundaries of cost efficiency, convenience, and customization. It has transformed some aspects of medical device production. However, expectations of the technology are often exaggerated in the media, so we spoke to leading researchers in the field about its practical applications and what can be expected in the near future.

Advances in upper limb stroke rehabilitation: a technology push.

PubMed

Loureiro, Rui C V; Harwin, William S; Nagai, Kiyoshi; Johnson, Michelle

2011-10-01

Strokes affect thousands of people worldwide leaving sufferers with severe disabilities affecting their daily activities. In recent years, new rehabilitation techniques have emerged such as constraint-induced therapy, biofeedback therapy and robot-aided therapy. In particular, robotic techniques allow precise recording of movements and application of forces to the affected limb, making it a valuable tool for motor rehabilitation. In addition, robot-aided therapy can utilise visual cues conveyed on a computer screen to convert repetitive movement practice into an engaging task such as a game. Visual cues can also be used to control the information sent to the patient about exercise performance and to potentially address psychosomatic variables influencing therapy. This paper overviews the current state-of-the-art on upper limb robot-mediated therapy with a focal point on the technical requirements of robotic therapy devices leading to the development of upper limb rehabilitation techniques that facilitate reach-to-touch, fine motor control, whole-arm movements and promote rehabilitation beyond hospital stay. The reviewed literature suggest that while there is evidence supporting the use of this technology to reduce functional impairment, besides the technological push, the challenge ahead lies on provision of effective assessment of outcome and modalities that have a stronger impact transferring functional gains into functional independence.

Pushing in labor: performance and not endurance.

PubMed

Buhimschi, Catalin S; Buhimschi, Irina A; Malinow, Andrew M; Kopelman, Jerome N; Weiner, Carl P

2002-06-01

It is believed that delivery is faster if women are instructed to voluntarily bear down in synchrony with their uterine contractions. Confronted by the large variance in the duration of the second stage of labor, many clinicians attribute a "fast" or a "short" expulsion time solely to the patient's willingness to cooperate or to the strength of epidural anesthesia if it is a factor. Yet, knowledge of pushing performance and the factors affecting it remain limited. We investigated the maternal, fetal, and labor characteristics that influence the maternal "pushing performance" and sought to design a predictive index that prospectively identified "high" versus "low" pushing performers. Intrauterine pressure (IP) was prospectively measured during the second stage of labor in 52 women recruited at one North American hospital. Recordings were begun after documentation of full cervical dilatation and descent of the fetal head to +2 station (on a -3/+3 scale). Each woman acted as her own control, received epidural anesthesia, and was alert and responsive throughout the study. Pushing (closed glottis technique) was performed in a standardized fashion. Multivariate analysis with linear regression was applied to identify significant associations between maternal, fetal, or labor characteristics as the independent variables and the percent increase in IP consequent to active pushing as the dependent variable. Women in labor increase their IP 62% by actively pushing with a contraction during the second stage. A scattergram of the individual percent increase above the baseline IP integral revealed that for some women, pushing more readily increased their IP than it did for others (range, 0% to 192%). The percent increase was best calculated by a linear combination of myometrial thickness, estimated fetal weight, the maternal body mass index, and the obstetric need for labor augmentation (P =.007, r = 0.52, power = 0.975). A 66% change in IP provided the best separation between high and low pushing performance. Myometrial thickness provided the single strongest contribution to the regression equation's predictive value (P =.01, r = -0.36). A myometrial thickness of 6 mm had a specificity of 88% (but only 53% sensitivity) for the identification of women able to increase their IP by 66% over baseline. In women in labor who have received epidural anesthesia, the efficiency with which maternal expulsive efforts are converted into increased IP is directly related to the patient's body mass index but inversely related to myometrial thickness, the sonographic estimate of fetal weight, and the need for labor augmentation.

Particle Engulfment and Pushing by Solidifying Interfaces: USMP-4 One Year Report

NASA Technical Reports Server (NTRS)

Stefanescu, D. M.; Juretzko, F. R.; Catalina, A. V.; Sen, S.; Curreri, P.; Schmitt, C.

1999-01-01

The experiment Particle Pushing and Engulfment by Solidifying Interfaces (PEP) was conducted during the USMP-4 (United States Microgravity Payload-4) mission on board the shuttle Columbia in November 1997. This experiment has its place within the framework of a long-term scientific effort to understand the physics of particle pushing. The first flight experiment of this kind was performed with a metal matrix composite on board STS-78 in the summer of 1996. The use of opaque matrices limits the evaluation to pre-and post-flight comparison of particle locations within the sample. By using transparent matrices the interaction of one or multiple particles with an advancing solid/liquid (SL) interface can be studied in-situ. If this observation can then directly be transmitted from the orbiter to the scientists by video down-link, a real-time execution of the experiment is possible in a micro-gravity environment. Part of this experiment was an extensive training of the payload specialists to perform the experiment in orbit. This was further enhanced by the availability of video down-link and direct communication with the astronauts. Even though the PEP experiment is aimed at understanding the interaction of a liquid/solid interface with insoluble particles and thus is fundamental in scope, the prospective applications are not. Possible applications range from improved metal matrix composites to understanding and preventing frost heaving affecting roads.

Characterizing hydraulic conductivity with the direct-push permeameter

USGS Publications Warehouse

Butler, J.J.; Dietrich, P.; Wittig, V.; Christy, T.

2007-01-01

The direct-push permeameter (DPP) is a promising approach for obtaining high-resolution information about vertical variations in hydraulic conductivity (K) in shallow unconsolidated settings. This small-diameter tool, which consists of a short screened section with a pair of transducers inset in the tool near the screen, is pushed into the subsurface to a depth at which a K estimate is desired. A short hydraulic test is then performed by injecting water through the screen at a constant rate (less than 4 L/min) while pressure changes are monitored at the transducer locations. Hydraulic conductivity is calculated using the injection rate and the pressure changes in simple expressions based on Darcy's Law. In units of moderate or higher hydraulic conductivity (more than 1 m/d), testing at a single level can be completed within 10 to 15 min. Two major advantages of the method are its speed and the insensitivity of the K estimates to the zone of compaction created by tool advancement. The potential of the approach has been assessed at two extensively studied sites in the United States and Germany over a K range commonly faced in practical field investigations (0.02 to 500 m/d). The results of this assessment demonstrate that the DPP can provide high-resolution K estimates that are in good agreement with estimates obtained through other means. ?? 2007 National Ground Water Association.

On the automatic link between affect and tendencies to approach and avoid: Chen and Bargh (1999) revisited

PubMed Central

Rotteveel, Mark; Gierholz, Alexander; Koch, Gijs; van Aalst, Cherelle; Pinto, Yair; Matzke, Dora; Steingroever, Helen; Verhagen, Josine; Beek, Titia F.; Selker, Ravi; Sasiadek, Adam; Wagenmakers, Eric-Jan

2015-01-01

Within the literature on emotion and behavioral action, studies on approach-avoidance take up a prominent place. Several experimental paradigms feature successful conceptual replications but many original studies have not yet been replicated directly. We present such a direct replication attempt of two seminal experiments originally conducted by Chen and Bargh (1999). In their first experiment, participants affectively evaluated attitude objects by pulling or pushing a lever. Participants who had to pull the lever with positively valenced attitude objects and push the lever with negatively valenced attitude objects (i.e., congruent instruction) did so faster than participants who had to follow the reverse (i.e., incongruent) instruction. In Chen and Bargh's second experiment, the explicit evaluative instructions were absent and participants merely responded to the attitude objects by either always pushing or always pulling the lever. Similar results were obtained as in Experiment 1. Based on these findings, Chen and Bargh concluded that (1) attitude objects are evaluated automatically; and (2) attitude objects automatically trigger a behavioral tendency to approach or avoid. We attempted to replicate both experiments and failed to find the effects reported by Chen and Bargh as indicated by our pre-registered Bayesian data analyses; nevertheless, the evidence in favor of the null hypotheses was only anecdotal, and definitive conclusions await further study. PMID:25883572

Are We Fixing the Wrong Things?

ERIC Educational Resources Information Center

Zhao, Yong

2006-01-01

More than 20 years ago, A Nation At Risk warned that "a rising tide of mediocrity" threatened the U.S. education system and that the United States would be unable to effectively compete with other economies because of a scarcity of graduates in science and technology. In 2001, No Child Left Behind reiterated that message, pushing through…

A Software Defined Radio Based Architecture for the Reagan Test Site Telemetry Modernization (RTM) Program

DTIC Science & Technology

2015-10-26

platforms and are quickly using up available spectrum. The national need in the commercial sector with emerging technologies such as 5G is pushing for...recovered and post processed later. The Front End Server also sends selected data stream across a high speed network link to the centralized

Backers of "21st-Century Skills" Take Flak

ERIC Educational Resources Information Center

Sawchuk, Stephen

2009-01-01

The phrase "21st-century skills" is everywhere in education policy discussions these days, from faculty lounges to the highest echelons of the U.S. education system. Broadly speaking, it refers to a push for schools to teach critical-thinking, analytical, and technology skills, in addition to the "soft skills" of creativity, collaboration, and…

Student Attitudes toward Flipping the General Chemistry Classroom

ERIC Educational Resources Information Center

Smith, J. Dominic

2013-01-01

The idea of ''flipping the classroom'' to make class time more engaging and student-centred has gained ground in recent years. The lecture portion of General Chemistry I and General Chemistry II courses were pushed outside the classroom using pre-recording technology and streaming delivery of content, in order to make in-class time more…

Changing the Image of CTE

ERIC Educational Resources Information Center

Kidwai, Sabrina

2011-01-01

Times have changed. Global economic competition is increasing and the need to develop a workforce with advanced skills is critical. The push to find sources of sustainable energy, the growing demands of the health care field and that of science, technology, engineering, and math (STEM)-related sectors are all driving the high-demand jobs in…

The New Screen Time: Computers, Tablets, and Smartphones Enter the Equation

ERIC Educational Resources Information Center

Wiles, Bradford B.; Schachtner, Laura; Pentz, Julie L.

2016-01-01

Emerging technologies attract children and push parents' and caregivers' abilities to attend to their families. This article presents recommendations related to the new version of screen time, which includes time with computers, tablets, and smartphones. Recommendations are provided for screen time for very young children and those in middle and…

Stop/Start: Overview

Science.gov Websites

/Start technology conserves energy by shutting off the gasoline engine when the vehicle is at rest, such as at a traffic light, and automatically re-starting it when the driver pushes the gas pedal to go engine when pulling out from a stop and generating electricity which is stored in the battery. Main stage

Future of Human Space Exploration

NASA Image and Video Library

2014-07-01

Now that the Space Shuttle era is over, NASA is writing the next chapters in human Spaceflight with its commercial and international partners. It is advancing research and technology on the International Space Station, opening low-Earth orbit to US industry, and pushing the frontiers of deep space even farther ... all the way to Mars.

Creating a Curriculum that Fosters Scientific thought

ERIC Educational Resources Information Center

Langley, Tilan

2009-01-01

Despite the progress in technology since the time of Maria Montessori, the science curriculum has been pushed aside slowly as teachers' focus has shifted to literacy and mathematics. The Early Childhood classroom has grown complacent with miniature life cycle lessons and attractive puzzles; the time has come to return science to a critical…

Educational Connoisseurship and Educational Criticism: Pushing beyond Information and Effectiveness.

ERIC Educational Resources Information Center

Koetting, J. Randall

The dominant model of schooling is a technical-rational management model based on behavioral, positivistic, quasi-scientific language, which has shifted attention from the art and craft of teaching to the "science and technology" of teaching. However, this model and the language which it uses limit educational thinking. Emphasis on…

Sustaining a Nepali Telecenter: An Ethnographic Study Using Activity Theory

ERIC Educational Resources Information Center

Lee, Jeffrey; Sparks, Paul

2014-01-01

While advances have made it possible for the average Nepali to access mobile phones, computers, and digital cameras, barriers continue to impede access. Like other governments, Nepal responded in 2004 by creating about 80 telecenters to push sustainable technology to its people. Five years later, most telecenters struggle with sustainability. This…

Learning to Fail

ERIC Educational Resources Information Center

Abrams, Fran

2009-01-01

The first decade of the current Labour Government had been characterised by a whole raft of education reforms aimed at driving up standards--a focus on early literacy and numeracy, standards funds to push up exam results, the much greater use of technology to track individual pupils' progress and to ensure a growing number achieved the benchmark…

Leadership 2.0: Social Media in Advocacy

ERIC Educational Resources Information Center

Gonzales, Lisa; Vodicka, Devin; White, John

2011-01-01

Technology is always changing, always improving, and always pushing the envelope for how one works in education. In this increasingly connected age, people have seen rapid growth in social network tools such as Twitter and Facebook. These sites are representative of Web 2.0 resources where users contribute content. Other examples of Web 2.0 sites…

Introducing ICT into Schools in Rwanda: Educational Challenges and Opportunities

ERIC Educational Resources Information Center

Rubagiza, Jolly; Were, Edmond; Sutherland, Rosamund

2011-01-01

The Rwandan government views Information and Communication Technology (ICT) as a key tool for transforming the economy, with the education sector playing an important role in developing the necessary human resources. Since 2000 there has been a big push to introduce computers into schools and integrate ICT into the education curriculum through a…

Ubiquitous Computing--Are We Crazy? Point/Counterpoint

ERIC Educational Resources Information Center

DeWitt, Scott W.; Horn, Patricia S.

2005-01-01

The push for ubiquitous computing (UC) relies on an understandable and well-intentioned belief that teaching and schooling need to be transformed. This view appears credible based on large-scale criteria, such as test scores relative to other countries, drop-out rates, and economic changes. And the use of technology to achieve this goal is…

Q&A with Jim Collins.

ERIC Educational Resources Information Center

Mast, Carlotta

2003-01-01

Applies to public education the principles that begin to explain why some organizations become great and others do not. States that an organization is able to achieve greatness only by pushing in an intelligent and consistent direction for years and even decades. (MLF)

The Slope Imaging Multi-Polarization Photon-Counting Lidar: Development and Performance Results

NASA Technical Reports Server (NTRS)

Dabney, Phillip

2010-01-01

The Slope Imaging Multi-polarization Photon-counting Lidar is an airborne instrument developed to demonstrate laser altimetry measurement methods that will enable more efficient observations of topography and surface properties from space. The instrument was developed through the NASA Earth Science Technology Office Instrument Incubator Program with a focus on cryosphere remote sensing. The SIMPL transmitter is an 11 KHz, 1064 nm, plane-polarized micropulse laser transmitter that is frequency doubled to 532 nm and split into four push-broom beams. The receiver employs single-photon, polarimetric ranging at 532 and 1064 nm using Single Photon Counting Modules in order to achieve simultaneous sampling of surface elevation, slope, roughness and depolarizing scattering properties, the latter used to differentiate surface types. Data acquired over ice-covered Lake Erie in February, 2009 are documenting SIMPL s measurement performance and capabilities, demonstrating differentiation of open water and several ice cover types. ICESat-2 will employ several of the technologies advanced by SIMPL, including micropulse, single photon ranging in a multi-beam, push-broom configuration operating at 532 nm.

The fusion code XGC: Enabling kinetic study of multi-scale edge turbulent transport in ITER [Book Chapter

DOE Office of Scientific and Technical Information (OSTI.GOV)

D'Azevedo, Eduardo; Abbott, Stephen; Koskela, Tuomas

The XGC fusion gyrokinetic code combines state-of-the-art, portable computational and algorithmic technologies to enable complicated multiscale simulations of turbulence and transport dynamics in ITER edge plasma on the largest US open-science computer, the CRAY XK7 Titan, at its maximal heterogeneous capability, which have not been possible before due to a factor of over 10 shortage in the time-to-solution for less than 5 days of wall-clock time for one physics case. Frontier techniques such as nested OpenMP parallelism, adaptive parallel I/O, staging I/O and data reduction using dynamic and asynchronous applications interactions, dynamic repartitioning for balancing computational work in pushing particlesmore » and in grid related work, scalable and accurate discretization algorithms for non-linear Coulomb collisions, and communication-avoiding subcycling technology for pushing particles on both CPUs and GPUs are also utilized to dramatically improve the scalability and time-to-solution, hence enabling the difficult kinetic ITER edge simulation on a present-day leadership class computer.« less

Intrapartum translabial ultrasound with pushing used to predict the difficulty in vacuum-assisted delivery of fetuses in non-occiput posterior position.

PubMed

Antonio Sainz, José; Borrero, Carlota; Aquise, Adriana; García-Mejido, José Antonio; Gutierrez, Laura; Fernández-Palacín, Ana

2016-10-01

Our aim is to evaluate the capacity of intrapartum translabial ultrasound (ITU) with pushing in the prediction of difficulty of fetal extraction in vacuum assisted deliveries. Prospective, observational study performed (2/2015-8/2015) on 75 nulliparous women, ≥37 weeks with singleton pregnancies at full dilatation who had ITU-with-pushing performed, previous to vacuum-placement for fetal extraction. Working on the translabial sagittal-plane, we assessed: Angle-Progression (AoP), Progression-Distance (PD) and Head-Direction (HD); in the axial plane we evaluated: Midline-Angle (MLA) and Head-Perineum-Distance (HPD). Vacuum extractions were classified as easy-difficulty (ED) (≤3 vacuum-pulls), difficult-unsuccessful (DD) (>3 vacuum-pulls). We did not assess occipito-posterior-presentations. Seventy nulliparous were studied (44-ED,26-DD). We observed no differences in obstetric, neonatal or intrapartum characteristics between the two study groups, with the following exceptions: newborn weight (3272 ± 438 g versus 3540 ± 372 g; p = 0.011) and number of vacuum-pulls (1.4-ED-vs-4.4-DD; p < 0.0005). AoP-pushing was 143.9° ± 14.6° in ED and 115.1°± 12.9° in DD (p < 0.0005); Head-Up was 79.5% versus 38.4% (p < 0.0005); PD-Pushing was 42.7 ± 11.3 mm versus 30.4 ± 9.8 mm (p < 0.0005); MLA-Pushing was 27.6°± 26.6° versus 57.5°±26.5°(p=0.025); HPD-Pushing was 40.8 ± 10.0 mm versus 47.4 ± 10.9 mm (p = 0.039). We identified that the presence of an AoP-Pushing > 128° predicts an Easy-Vacuum-Delivery (≤3 Vacuum-Pulls) in  >85% of cases (Sen 80%-FPR 9.3%).

Sustainable Rural Telehealth Innovation: A Public Health Case Study

PubMed Central

Singh, Rajendra; Mathiassen, Lars; Stachura, Max E; Astapova, Elena V

2010-01-01

Objective To examine adoption of telehealth in a rural public health district and to explain how the innovation became sustainable. Study Setting Longitudinal, qualitative study (1988–2008) of the largest public health district in Georgia. Study Design Case study design provided deep insights into the innovation's social dynamics. Punctuated equilibrium theory helped present and make sense of the process. We identified antecedent conditions and outcomes, and we distinguished between episodes and encounters based on the disruptive effects of events. Data Collection Twenty-five semistructured interviews with 19 decision makers and professionals, direct observations, published papers, grant proposals, technical specifications, and other written materials. Principal Findings Strong collaboration within the district, with local community, and with external partners energized the process. Well-functioning outreach clinics made telehealth desirable. Local champions cultivated participation and generative capability, and overcame barriers through opportunistic exploitation of technological and financial options. Telehealth usage fluctuated between medical and administrative operations in response to internal needs and contextual dynamics. External agencies provided initial funding and supported later expansion. Conclusions Extensive internal and external collaboration, and a combination of technology push and opportunistic exploitation, can enable sustainable rural telehealth innovation. PMID:20459449

SBIR Technology Applications to Space Communications and Navigation (SCaN)

NASA Technical Reports Server (NTRS)

Liebrecht, Phil; Eblen, Pat; Rush, John; Tzinis, Irene

2010-01-01

This slide presentation reviews the mission of the Space Communications and Navigation (SCaN) Office with particular emphasis on opportunities for technology development with SBIR companies. The SCaN office manages NASA's space communications and navigation networks: the Near Earth Network (NEN), the Space Network (SN), and the Deep Space Network (DSN). The SCaN networks nodes are shown on a world wide map and the networks are described. Two types of technologies are described: Pull technology, and Push technologies. A listing of technology themes is presented, with a discussion on Software defined Radios, Optical Communications Technology, and Lunar Lasercom Space Terminal (LLST). Other technologies that are being investigated are some Game Changing Technologies (GCT) i.e., technologies that offer the potential for improving comm. or nav. performance to the point that radical new mission objectives are possible, such as Superconducting Quantum Interference Filters, Silicon Nanowire Optical Detectors, and Auto-Configuring Cognitive Communications

Sub-millimetre-wave and far infrared ESA missions with a focus on antenna technologies

NASA Astrophysics Data System (ADS)

de Maagt, Peter; Polegre, Arturo; Crone, Gerry

2017-11-01

The are of (sub)millimetre wave and far-infrared antenna technology is a very dynamic sector in electromagnetics. Several future ESA missions have been planned and their requirements are pushing the limits of existing technologies. Feasibility studies have provided baseline concepts, which have helped to grasp the main features of these instruments and to identify their critical aspects. A number of scientific and technical activities have then followed, dedicated to specific topics. The paper discusses (sub)millimetre wave and far-infrared Earth observation and astronomical instruments. Furthermore, generic technology work carried out in the frame of ESA contracts, applicable to this frequency range, is reported on.

Powerful nuclear technology, anywhere, requires functioning system of free elections

NASA Astrophysics Data System (ADS)

Synek, Miroslav

2000-03-01

Historical development on our planet, utilizing the knowledge of physics, has reached a powerful technology of nuclear intercontinental ballistic missiles, conceivably controllable through a computerized ``push-button". Whenever this technology falls under the control of an irresponsible, miscalculating, or, insane, dictator, with powerful means of a mass-produced nuclear built-up, anywhere on our planet, the very survival of all humanity on our planet could be threatened. Therefore, it is a historical urgency that this technology is under the control by a government of the people, by the people and for the people, based on a sufficiently secure system of free elections, in any country on our planet, wherever and whenever such a threatening possibility exists.

Layered Metals Fabrication Technology Development for Support of Lunar Exploration at NASA/MSFC

NASA Technical Reports Server (NTRS)

Cooper, Kenneth G.; Good, James E.; Gilley, Scott D.

2007-01-01

NASA's human exploration initiative poses great opportunity and risk for missions to the Moon and beyond. In support of these missions, engineers and scientists at the Marshall Space Flight Center are developing technologies for ground-based and in-situ fabrication capabilities utilizing provisioned and locally-refined materials. Development efforts are pushing state-of-the art fabrication technologies to support habitat structure development, tools and mechanical part fabrication, as well as repair and replacement of ground support and space mission hardware such as life support items, launch vehicle components and crew exercise equipment. This paper addresses current fabrication technologies relative to meeting targeted capabilities, near term advancement goals, and process certification of fabrication methods.

Context-Based Tourism Information Filtering with a Semantic Rule Engine

PubMed Central

Lamsfus, Carlos; Martin, David; Alzua-Sorzabal, Aurkene; López-de-Ipiña, Diego; Torres-Manzanera, Emilio

2012-01-01

This paper presents the CONCERT framework, a push/filter information consumption paradigm, based on a rule-based semantic contextual information system for tourism. CONCERT suggests a specific insight of the notion of context from a human mobility perspective. It focuses on the particular characteristics and requirements of travellers and addresses the drawbacks found in other approaches. Additionally, CONCERT suggests the use of digital broadcasting as push communication technology, whereby tourism information is disseminated to mobile devices. This information is then automatically filtered by a network of ontologies and offered to tourists on the screen. The results obtained in the experiments carried out show evidence that the information disseminated through digital broadcasting can be manipulated by the network of ontologies, providing contextualized information that produces user satisfaction. PMID:22778584

Context-based tourism information filtering with a semantic rule engine.

PubMed

Lamsfus, Carlos; Martin, David; Alzua-Sorzabal, Aurkene; López-de-Ipiña, Diego; Torres-Manzanera, Emilio

2012-01-01

This paper presents the CONCERT framework, a push/filter information consumption paradigm, based on a rule-based semantic contextual information system for tourism. CONCERT suggests a specific insight of the notion of context from a human mobility perspective. It focuses on the particular characteristics and requirements of travellers and addresses the drawbacks found in other approaches. Additionally, CONCERT suggests the use of digital broadcasting as push communication technology, whereby tourism information is disseminated to mobile devices. This information is then automatically filtered by a network of ontologies and offered to tourists on the screen. The results obtained in the experiments carried out show evidence that the information disseminated through digital broadcasting can be manipulated by the network of ontologies, providing contextualized information that produces user satisfaction.

Pharmaceutical drug marketing strategies and tactics: a comparative analysis of attitudes held by pharmaceutical representatives and physicians.

PubMed

Parker, R Stephen; Pettijohn, Charles E

2005-01-01

A variety of promotional strategies have been used to stimulate sales of pharmaceutical drugs. Traditionally, push techniques have been the predominant means used to encourage physicians to prescribe drugs and thus increase sales. Recently, the traditional push strategy has been supplemented by a pull strategy. Direct-to-consumer advertising is increasingly used to encourage consumers to request advertised drugs from their physicians. This research compares the attitudes of two of the most affected participants in the prescriptive sales processes; physicians and pharmaceutical sales representatives. The findings indicate differences between physicians and pharmaceutical sales representatives regarding the efficacy and ethical considerations of various promotional strategies.

Sex pheromone source location by garter snakes: : A mechanism for detection of direction in nonvolatile trails.

PubMed

Ford, N B; Low, J R

1984-08-01

Male plains garter snakes,Thamnophis radix, tested in a 240-cm-long arena can detect directional information from a female pheromone trail only when the female is allowed to push against pegs while laying the trail. The female's normal locomotor activity apparently deposits pheromone on the anterolateral surfaces of vertical structures in her environment. The male sensorily assays the sides of these objects and from this information determines the female's direction of travel.

A five-year performance review of field-scale, slow-release permanganate candles with recommendations for second-generation improvements

PubMed Central

Christenson, Mark; Kambhu, Ann; Reece, James; Comfort, Steve; Brunner, Laurie

2016-01-01

In 2009, we identified a TCE plume at an abandoned landfill that was located in a low permeable silty-clay aquifer. To treat the TCE, we manufactured slow-release potassium permanganate cylinders (oxidant candles) that had diameters of either 5.1 or 7.6 cm and were 91.4 cm long. In 2010, we compared two methods of candle installation by inserting equal masses of the oxidant candles (7.6-cm vs 5.1-cm dia). The 5.1-cm dia candles were inserted with direct-push rods while the 7.6-cm candles were housed in screens and lowered into 10 permanent wells. Since installation, the 7.6-cm oxidant candles have been refurbished approximately once per year by gently scraping off surface oxides. In 2012, we reported initial results; in this paper, we provide a 5-yr performance review since installation. Temporal sampling shows oxidant candles placed in wells have steadily reduced migrating TCE concentrations. Moreover, these candles still maintain an inner core of oxidant that has yet to contribute to the dissolution front and should provide several more years of service. Oxidant candles inserted by direct-push have stopped reducing TCE concentrations because a MnO2 scale developed on the outside of the candles. To counteract oxide scaling, we fabricated a second generation of oxidant candles that contain sodium hexametaphosphate. Laboratory experiments (batch and flow-through) show that these second-generation permanganate candles have better release characteristics and are less prone to oxide scaling. This improvement should reduce the need to perform maintenance on candles placed in wells and provide greater longevity for candles inserted by direct-push. PMID:26901481

A five-year performance review of field-scale, slow-release permanganate candles with recommendations for second-generation improvements.

PubMed

Christenson, Mark; Kambhu, Ann; Reece, James; Comfort, Steve; Brunner, Laurie

2016-05-01

In 2009, we identified a TCE plume at an abandoned landfill that was located in a low permeable silty-clay aquifer. To treat the TCE, we manufactured slow-release potassium permanganate cylinders (oxidant candles) that had diameters of either 5.1 or 7.6 cm and were 91.4 cm long. In 2010, we compared two methods of candle installation by inserting equal masses of the oxidant candles (7.6-cm vs 5.1-cm dia). The 5.1-cm dia candles were inserted with direct-push rods while the 7.6-cm candles were housed in screens and lowered into 10 permanent wells. Since installation, the 7.6-cm oxidant candles have been refurbished approximately once per year by gently scraping off surface oxides. In 2012, we reported initial results; in this paper, we provide a 5-yr performance review since installation. Temporal sampling shows oxidant candles placed in wells have steadily reduced migrating TCE concentrations. Moreover, these candles still maintain an inner core of oxidant that has yet to contribute to the dissolution front and should provide several more years of service. Oxidant candles inserted by direct-push have stopped reducing TCE concentrations because a MnO2 scale developed on the outside of the candles. To counteract oxide scaling, we fabricated a second generation of oxidant candles that contain sodium hexametaphosphate. Laboratory experiments (batch and flow-through) show that these second-generation permanganate candles have better release characteristics and are less prone to oxide scaling. This improvement should reduce the need to perform maintenance on candles placed in wells and provide greater longevity for candles inserted by direct-push. Copyright © 2016 Elsevier Ltd. All rights reserved.

Using slow-release permanganate candles to remove TCE from a low permeable aquifer at a former landfill.

PubMed

Christenson, Mark D; Kambhu, Ann; Comfort, Steve D

2012-10-01

Past disposal of industrial solvents into unregulated landfills is a significant source of groundwater contamination. In 2009, we began investigating a former unregulated landfill with known trichloroethene (TCE) contamination. Our objective was to pinpoint the location of the plume and treat the TCE using in situ chemical oxidation (ISCO). We accomplished this by using electrical resistivity imaging (ERI) to survey the landfill and map the subsurface lithology. We then used the ERI survey maps to guide direct push groundwater sampling. A TCE plume (100-600 μg L(-1)) was identified in a low permeable silty-clay aquifer (K(h)=0.5 md(-1)) that was within 6m of ground surface. To treat the TCE, we manufactured slow-release potassium permanganate candles (SRPCs) that were 91.4 cm long and either 5. cm or 7.6 cm in dia. For comparison, we inserted equal masses of SRPCs (7.6-cm versus 5.1-cm dia) into the low permeable aquifer in staggered rows that intersected the TCE plume. The 5.1-cm dia candles were inserted using direct push rods while the 7.6-cm SRPCs were placed in 10 permanent wells. Pneumatic circulators that emitted small air bubbles were placed below the 7.6-cm SRPCs in the second year. Results 15 months after installation showed significant TCE reductions in the 7.6-cm candle treatment zone (67-85%) and between 10% and 66% decrease in wells impacted by the direct push candles. These results support using slow-release permanganate candles as a means of treating chlorinated solvents in low permeable aquifers. Copyright © 2012 Elsevier Ltd. All rights reserved.

Supporting the Social Media Needs of Emergency Public Information Officers with Human-Centered Design and Development

ERIC Educational Resources Information Center

Hughes, Amanda Lee

2012-01-01

Emergency response agencies, which operate as command-and-control organizations, push information to members of the public with too few mechanisms to support communication flowing back. Recently, information communication technologies (ICTs) such as social media have challenged this one-way model by allowing the public to participate in emergency…

The ICT Laboratory: An Analysis of Computers in Public High Schools in Rural India

ERIC Educational Resources Information Center

Arora, Payal

2007-01-01

There has been a strong push towards e-literacy in India, particularly in the distribution and usage of information and communication technologies (ICT) in schools for economic and social growth. As a result, the Vidhya Vahini scheme was launched in Kuppam, a marginalized village constituency in Andhra Pradesh. This scheme strived to disseminate…

ICT-- The New Frontier? Pushing the Boundaries of Careers Practice

ERIC Educational Resources Information Center

Bimrose, Jenny; Kettunen, Jaana; Goddard, Tannis

2015-01-01

Much progress has been made in integrating information and communications technology (ICT) into careers practice, but there is still room for improvement. An international lens is adopted to examine some key elements that contribute to the successful integration of ICT into careers practice. We start by exploring the role of policy, using the UK…

DEVELOPMENT OF AN IN SITU THERMAL EXTRACTION DETECTION SYSTEM (TEDS) FOR RAPID, ACCURATE, QUANTITATIVE ANALYSIS OF ENVIRONMENTAL POLLUTANTS IN THE SUBSURFACE - PHASE I

EPA Science Inventory

Ion Signature Technology, Inc. (IST) will develop and market a collection and analysis system that will retrieve soil-bound pollutants as well as soluble and non-soluble contaminants from groundwater as the probe is pushed by cone penetrometry of Geoprobe into the subsurface. ...

Computers in the Classroom: A Feminist Issue.

ERIC Educational Resources Information Center

Stalker, Sylvia

Women stand to lose a great deal in the information revolution if they fail to master computer technology. Presently they are taking little part in the computer field. In the future, access to jobs, information, and power will depend on computer knowledge and skills. Women will be pushed into lower status jobs or out of jobs altogether,…

Democracy is a historical urgency

NASA Astrophysics Data System (ADS)

Synek, Miroslav

2014-03-01

Survival of human society on this planet depends heavily on coping with advanced nuclear technological development. Democracy is a historical urgency, in the age of intercontinental nuclear missiles, computerized on a push-button, conceivably controllable by a miscalculating, suicidal and very powerful dictator, producing a global nuclear holocaust, on our entire planet. Diplomacy should help humanity to approach the contemporary situation.

The Role of Health Educators in Mitigating Health Risk from Increasing Screen Time in Schools and at Home

ERIC Educational Resources Information Center

Merga, Margaret K.; Williams, Ross

2016-01-01

Contemporary health educators in schools are responsible for promoting the health of individual students, as well as a healthy school environment. The ongoing push for increasing device use in schools, which is underpinned by the information and communications technology (ICT) capability requirements of the new Australian Curriculum, can…

Dense, Efficient Chip-to-Chip Communication at the Extremes of Computing

ERIC Educational Resources Information Center

Loh, Matthew

2013-01-01

The scalability of CMOS technology has driven computation into a diverse range of applications across the power consumption, performance and size spectra. Communication is a necessary adjunct to computation, and whether this is to push data from node-to-node in a high-performance computing cluster or from the receiver of wireless link to a neural…

Possibility Spaces: Using The Sims 2 as a Sandbox to Explore Possible Selves with At-Risk Teenage Males

ERIC Educational Resources Information Center

King, Elizabeth

2011-01-01

Interactive technologies provide today's youth a low stakes sandbox to collect experiences (Gee, 2004) and try tasks and identities (Gee, 1991) that push the boundaries of "known" and open up the world of possibility. Pairing affordances of video games with the possible selves framework (Markus & Nurius, 1986), research involved…

Push-Pull Tests for Evaluating the Aerobic Cometabolism of Chlorinated Aliphatic Hydrocarbons

DTIC Science & Technology

2006-09-01

Z39-18 i COST & PERFORMANCE REPORT ESTCP Project: ER-9921 TABLE OF CONTENTS Page 1.0 EXECUTIVE SUMMARY...31 iv ACRONYMS AND ABBREVIATIONS ACFEE Air Force Center for Environmental Excellence Br bromine BTEX benzene...ESTCP Environmental Security Technology Certification Program FID flame ionization detector GC gas chromatography HP Hewlett-Packard IC

Push-Pull Tests for Evaluating the Aerobic Cometabolism of Chlorinated Aliphatic Hydrocarbons: Cost & Performance Report

DTIC Science & Technology

2006-09-01

Std Z39-18 i COST & PERFORMANCE REPORT ESTCP Project: ER-9921 TABLE OF CONTENTS Page 1.0 EXECUTIVE SUMMARY...31 iv ACRONYMS AND ABBREVIATIONS ACFEE Air Force Center for Environmental Excellence Br bromine BTEX...Agency ESTCP Environmental Security Technology Certification Program FID flame ionization detector GC gas chromatography HP Hewlett-Packard

Rogers' Typograph Versus Mergenthaler's Linotype: The Push and Shove of Patents and Priority in the 1890s.

ERIC Educational Resources Information Center

Goble, Corban

The interplay of historical, technological, legal, and economic events that surrounded the strident controversies involving two competing 1890s composing machines--John R. Rogers's Typograph and Ottmar Mergenthaler's Linotype--is examined in this paper. Using patent copies, court documents, trade journal reports and newspaper articles of the era,…

NREL Efforts Push Hydrogen Vehicles Further Along | News | NREL

Science.gov Websites

. Photo by Ellen Jaskol The inaugural National Hydrogen and Fuel Cell Day, held in October, was too new after a decade of waiting for this to happen," said Keith Wipke, manager of NREL's Fuel Cell and Hydrogen Technologies program. At NREL since 1993, Wipke has been passionate about having fuel cell

Push and Pull: The Influence of Race/Ethnicity on Agency in Doctoral Student Career Advancement

ERIC Educational Resources Information Center

Jaeger, Audrey J.; Mitchall, Allison; O'Meara, KerryAnn; Grantham, Ashley; Zhang, Jingjing; Eliason, Jennifer; Cowdery, Kelly

2017-01-01

This study examined and enriched our understanding of the career choice process for doctoral students of color in science, technology, engineering, and math (STEM) fields. In addition, it explored the challenges facing all doctoral students in STEM in understanding and making meaning of diversity as it relates to individual perspectives and…

Digital Storytelling: An Integrated Approach to Language Learning for the 21st Century Student

ERIC Educational Resources Information Center

Ribeiro, Sandra

2015-01-01

Societal changes have, throughout history, pushed the long-established boundaries of education across all grade levels. Technology and media merge with education in a continuous complex social process with human consequences and effects. We, teachers, can aspire to understand and interpret this volatile context that is being redesigned at the same…

Advanced Gradient Heating Facility (AGHF)

NASA Technical Reports Server (NTRS)

1998-01-01

This section of the publication includes papers entitled: (1) Coupled growth in hypermonotectics; (2) Directional solidification of refined Al-4 wt.% Cu alloys; (3) Effects of convection on interface curvature during growth of concentrated ternary compounds; (4) Directional solidification of Al-1.5 wt.% Ni alloys; (5) Interactive response of advancing phase boundaries to particles; (6) INTeractive Response of Advancing Phase boundaries to Particles-INTRAPP; and (7) Particle engulfment and pushing by solidifying interfaces.

Fast shear compounding using robust 2-D shear wave speed calculation and multi-directional filtering.

PubMed

Song, Pengfei; Manduca, Armando; Zhao, Heng; Urban, Matthew W; Greenleaf, James F; Chen, Shigao

2014-06-01

A fast shear compounding method was developed in this study using only one shear wave push-detect cycle, such that the shear wave imaging frame rate is preserved and motion artifacts are minimized. The proposed method is composed of the following steps: 1. Applying a comb-push to produce multiple differently angled shear waves at different spatial locations simultaneously; 2. Decomposing the complex shear wave field into individual shear wave fields with differently oriented shear waves using a multi-directional filter; 3. Using a robust 2-D shear wave speed calculation to reconstruct 2-D shear elasticity maps from each filter direction; and 4. Compounding these 2-D maps from different directions into a final map. An inclusion phantom study showed that the fast shear compounding method could achieve comparable performance to conventional shear compounding without sacrificing the imaging frame rate. A multi-inclusion phantom experiment showed that the fast shear compounding method could provide a full field-of-view, 2-D and compounded shear elasticity map with three types of inclusions clearly resolved and stiffness measurements showing excellent agreement to the nominal values. Copyright © 2014 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

The Wire-Grasping Method as a New Technique for Forceps Biopsy of Biliary Strictures: A Prospective Randomized Controlled Study of Effectiveness.

PubMed

Yamashita, Yasunobu; Ueda, Kazuki; Kawaji, Yuki; Tamura, Takashi; Itonaga, Masahiro; Yoshida, Takeichi; Maeda, Hiroki; Magari, Hirohito; Maekita, Takao; Iguchi, Mikitaka; Tamai, Hideyuki; Ichinose, Masao; Kato, Jun

2016-07-15

Transpapillary forceps biopsy is an effective diagnostic technique in patients with biliary stricture. This prospective study aimed to determine the usefulness of the wire-grasping method as a new technique for forceps biopsy. Consecutive patients with biliary stricture or irregularities of the bile duct wall were randomly allocated to either the direct or wire-grasping method group. In the wiregrasping method, forceps in the duodenum grasps a guidewire placed into the bile duct beforehand, and then, the forceps are pushed through the papilla without endoscopic sphincterotomy. In the direct method, forceps are directly pushed into the bile duct alongside a guide-wire. The primary endpoint was the success rate of obtaining specimens suitable for adequate pathological examination. In total, 32 patients were enrolled, and 28 (14 in each group) were eligible for analysis. The success rate was significantly higher using the wire-grasping method than the direct method (100% vs 50%, p=0.016). Sensitivity and accuracy for the diagnosis of cancer were comparable in patients with the successful procurement of biopsy specimens between the two methods (91% vs 83% and 93% vs 86%, respectively). The wire-grasping method is useful for diagnosing patients with biliary stricture or irregularities of the bile duct wall.

78 FR 58965 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-25

... November 26, 2012. Zodiac Services has issued the following service bulletins. Zodiac Services Service... electrical status indications on the push button annunciators and the engine instrument and crew alerting system. Certain of those reported incidents resulted in the airplane experiencing a momentary loss of...

USING DIRECT-PUSH TOOLS TO MAP HYDROSTRATIGRAPHY AND PREDICT MTBE PLUME DIVING

EPA Science Inventory

MTBE plumes have been documented to dive beneath screened intervals of conventional monitoring well networks at a number of LUST sites. This behavior makes these plumes difficult both to detect and remediate. Electrical conductivity logging and pneumatic slug testing performed in...

The anatomy of a launch vehicle : quarterly report topic

DOT National Transportation Integrated Search

2001-01-01

Conceptually, a rocket is a simple machine. Following Newton's law that every force has an equal and opposite reaction, a rocket pushes mass in one direction and moves in the other. However, a modern space launch vehicle is a finely tuned and very co...

Plasma dynamics near critical density inferred from direct measurements of laser hole boring

NASA Astrophysics Data System (ADS)

Gong, Chao; Tochitsky, Sergei Ya.; Fiuza, Frederico; Pigeon, Jeremy J.; Joshi, Chan

2016-06-01

We have used multiframe picosecond optical interferometry to make direct measurements of the hole boring velocity, vHB, of the density cavity pushed forward by a train of C O2 laser pulses in a near critical density helium plasma. As the pulse train intensity rises, the increasing radiation pressure of each pulse pushes the density cavity forward and the plasma electrons are strongly heated. After the peak laser intensity, the plasma pressure exerted by the heated electrons strongly impedes the hole boring process and the vHB falls rapidly as the laser pulse intensity falls at the back of the laser pulse train. A heuristic theory is presented that allows the estimation of the plasma electron temperature from the measurements of the hole boring velocity. The measured values of vHB, and the estimated values of the heated electron temperature as a function of laser intensity are in reasonable agreement with those obtained from two-dimensional numerical simulations.

Plasma dynamics near critical density inferred from direct measurements of laser hole boring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gong, Chao; Tochitsky, Sergei Ya.; Fiuza, Frederico

Here, we use multiframe picosecond optical interferometry to make direct measurements of the hole boring velocity, vHB, of the density cavity pushed forward by a train of CO 2 laser pulses in a near critical density helium plasma. As the pulse train intensity rises, the increasing radiation pressure of each pulse pushes the density cavity forward and the plasma electrons are strongly heated. After the peak laser intensity, the plasma pressure exerted by the heated electrons strongly impedes the hole boring process and the vHB falls rapidly as the laser pulse intensity falls at the back of the laser pulsemore » train. We present a heuristic theory that allows the estimation of the plasma electron temperature from the measurements of the hole boring velocity. Furthermore, the measured values of v HB, and the estimated values of the heated electron temperature as a function of laser intensity are in reasonable agreement with those obtained from two-dimensional numerical simulations.« less

Plasma dynamics near critical density inferred from direct measurements of laser hole boring.

PubMed

Gong, Chao; Tochitsky, Sergei Ya; Fiuza, Frederico; Pigeon, Jeremy J; Joshi, Chan

2016-06-01

We have used multiframe picosecond optical interferometry to make direct measurements of the hole boring velocity, v_{HB}, of the density cavity pushed forward by a train of CO_{2} laser pulses in a near critical density helium plasma. As the pulse train intensity rises, the increasing radiation pressure of each pulse pushes the density cavity forward and the plasma electrons are strongly heated. After the peak laser intensity, the plasma pressure exerted by the heated electrons strongly impedes the hole boring process and the v_{HB} falls rapidly as the laser pulse intensity falls at the back of the laser pulse train. A heuristic theory is presented that allows the estimation of the plasma electron temperature from the measurements of the hole boring velocity. The measured values of v_{HB}, and the estimated values of the heated electron temperature as a function of laser intensity are in reasonable agreement with those obtained from two-dimensional numerical simulations.

Plasma dynamics near critical density inferred from direct measurements of laser hole boring

DOE PAGES

Gong, Chao; Tochitsky, Sergei Ya.; Fiuza, Frederico; ...

2017-06-24

Here, we use multiframe picosecond optical interferometry to make direct measurements of the hole boring velocity, vHB, of the density cavity pushed forward by a train of CO 2 laser pulses in a near critical density helium plasma. As the pulse train intensity rises, the increasing radiation pressure of each pulse pushes the density cavity forward and the plasma electrons are strongly heated. After the peak laser intensity, the plasma pressure exerted by the heated electrons strongly impedes the hole boring process and the vHB falls rapidly as the laser pulse intensity falls at the back of the laser pulsemore » train. We present a heuristic theory that allows the estimation of the plasma electron temperature from the measurements of the hole boring velocity. Furthermore, the measured values of v HB, and the estimated values of the heated electron temperature as a function of laser intensity are in reasonable agreement with those obtained from two-dimensional numerical simulations.« less

Solar photovoltaic power systems: an electric utility R & d perspective.

PubMed

Demeo, E A; Taylor, R W

1984-04-20

Solar photovoltaic technology is receiving increasing attention as a prospective source of bulk, electric utility power within the next 10 to 20 years. Successful development will require solar energy conversion efficiencies of about 15 percent for photovoltaic flat-plate modules, or about 25 percent for photovoltaic cells using highly concentrated sunlight. Three different cell technologies have a better than even chance of achieving these target efficiencies with costs and operating lifetimes that would allow significant use by electric utilities. The challenge for the next decade is to push photovoltaic technology to its physical limits while expanding markets and user confidence with currently available systems.

Magnetic tunnel junction based spintronic logic devices

NASA Astrophysics Data System (ADS)

Lyle, Andrew Paul

The International Technology Roadmap for Semiconductors (ITRS) predicts that complimentary metal oxide semiconductor (CMOS) based technologies will hit their last generation on or near the 16 nm node, which we expect to reach by the year 2025. Thus future advances in computational power will not be realized from ever-shrinking device sizes, but rather by 'outside the box' designs and new physics, including molecular or DNA based computation, organics, magnonics, or spintronic. This dissertation investigates magnetic logic devices for post-CMOS computation. Three different architectures were studied, each relying on a different magnetic mechanism to compute logic functions. Each design has it benefits and challenges that must be overcome. This dissertation focuses on pushing each design from the drawing board to a realistic logic technology. The first logic architecture is based on electrically connected magnetic tunnel junctions (MTJs) that allow direct communication between elements without intermediate sensing amplifiers. Two and three input logic gates, which consist of two and three MTJs connected in parallel, respectively were fabricated and are compared. The direct communication is realized by electrically connecting the output in series with the input and applying voltage across the series connections. The logic gates rely on the fact that a change in resistance at the input modulates the voltage that is needed to supply the critical current for spin transfer torque switching the output. The change in resistance at the input resulted in a voltage margin of 50--200 mV and 250--300 mV for the closest input states for the three and two input designs, respectively. The two input logic gate realizes the AND, NAND, NOR, and OR logic functions. The three input logic function realizes the Majority, AND, NAND, NOR, and OR logic operations. The second logic architecture utilizes magnetostatically coupled nanomagnets to compute logic functions, which is the basis of Magnetic Quantum Cellular Automata (MQCA). MQCA has the potential to be thousands of times more energy efficient than CMOS technology. While interesting, these systems are academic unless they can be interfaced into current technologies. This dissertation pushed past a major hurdle by experimentally demonstrating a spintronic input/output (I/O) interface for the magnetostatically coupled nanomagnets by incorporating MTJs. This spintronic interface allows individual nanomagnets to be programmed using spin transfer torque and read using magneto resistance structure. Additionally the spintronic interface allows statistical data on the reliability of the magnetic coupling utilized for data propagation to be easily measured. The integration of spintronics and MQCA for an electrical interface to achieve a magnetic logic device with low power creates a competitive post-CMOS logic device. The final logic architecture that was studied used MTJs to compute logic functions and magnetic domain walls to communicate between gates. Simulations were used to optimize the design of this architecture. Spin transfer torque was used to compute logic function at each MTJ gate and was used to drive the domain walls. The design demonstrated that multiple nanochannels could be connected to each MTJ to realize fan-out from the logic gates. As a result this logic scheme eliminates the need for intermediate reads and conversions to pass information from one logic gate to another.

Field Evaluation of a Push-Pull System to Reduce Malaria Transmission

PubMed Central

Menger, David J.; Omusula, Philemon; Holdinga, Maarten; Homan, Tobias; Carreira, Ana S.; Vandendaele, Patrice; Derycke, Jean-Luc; Mweresa, Collins K.; Mukabana, Wolfgang Richard; van Loon, Joop J. A.; Takken, Willem

2015-01-01

Malaria continues to place a disease burden on millions of people throughout the tropics, especially in sub-Saharan Africa. Although efforts to control mosquito populations and reduce human-vector contact, such as long-lasting insecticidal nets and indoor residual spraying, have led to significant decreases in malaria incidence, further progress is now threatened by the widespread development of physiological and behavioural insecticide-resistance as well as changes in the composition of vector populations. A mosquito-directed push-pull system based on the simultaneous use of attractive and repellent volatiles offers a complementary tool to existing vector-control methods. In this study, the combination of a trap baited with a five-compound attractant and a strip of net-fabric impregnated with micro-encapsulated repellent and placed in the eaves of houses, was tested in a malaria-endemic village in western Kenya. Using the repellent delta-undecalactone, mosquito house entry was reduced by more than 50%, while the traps caught high numbers of outdoor flying mosquitoes. Model simulations predict that, assuming area-wide coverage, the addition of such a push-pull system to existing prevention efforts will result in up to 20-fold reductions in the entomological inoculation rate. Reductions of such magnitude are also predicted when mosquitoes exhibit a high resistance against insecticides. We conclude that a push-pull system based on non-toxic volatiles provides an important addition to existing strategies for malaria prevention. PMID:25923114

Isotope Ratio Mass Spectrometry and Shale Gas - What Is Possible with Current Technology?

NASA Astrophysics Data System (ADS)

Barrie, C. D.; Kasson, A.

2014-12-01

With ever increasing exploration and exploitation of 'unconventional' hydrocarbon resources, the drive to understand the origins, history and importance of these resources and their effects on the surrounding environment (i.e. ground waters) has never been more important. High-throughput, high-precision isotopic measurements are therefore a key tool in this industry to both understand the gas generated and monitor the development and stability of wells through time. With the advent of cavity ringdown spectroscopy (CRDS) instrumentation, there has been a push in some applications - environmental & atmospheric - to gather more and more data directly at the location of collection or at dedicated field stations. Furthermore, CRDS has resulted in users seeking greater autonomy of instrumentation and so-called black box technology. Traditionally IRMS technology has not met any of these demands, requiring very specific and extensive footprint, power and environmental requirements. This has meant that the 'Oil & Gas' sector, which for natural gases measurements requires GC-IRMS technology - not possible via CRDS - loses time, money and manpower as samples get sent to central facility or contract labs with potentially long lee times. However, recent developments in technology mean that IRMS systems exist which are benchtop, have much lower power requirements, standard power connections and as long as housed in a temperature controlled field stations can be deployed anywhere. Furthermore, with advances in electronics and software IRMS systems are approaching the black box level of newer instrumentation while maintaining the flexibility and abilities of isotope ratio mass spectrometry. This presentation will outline changes in IRMS technology applicable to the Oil & Gas industry, discuss the feasibility of true 'field' deployability and present results from a range of Oil & Gas samples.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hovel, Harold; Prettyman, Kevin

A side-by-side analysis was done on then currently available technology, along with roadmaps to push each particular option forward. Variations in turnkey line processes can and do result in finished solar device performance. Together with variations in starting material quality, the result is a distribution of effciencies. Forensic analysis and characterization of each crystalline Si based technology will determine the most promising approach with respect to cost, efficiency and reliability. Forensic analysis will also shed light on the causes of binning variations. Si solar cells were forensically analyzed from each turn key supplier using a host of techniques

Can the black box be cracked? The augmentation of microbial ecology by high-resolution, automated sensing technologies.

PubMed

Shade, Ashley; Carey, Cayelan C; Kara, Emily; Bertilsson, Stefan; McMahon, Katherine D; Smith, Matthew C

2009-08-01

Automated sensing technologies, 'ASTs,' are tools that can monitor environmental or microbial-related variables at increasingly high temporal resolution. Microbial ecologists are poised to use AST data to couple microbial structure, function and associated environmental observations on temporal scales pertinent to microbial processes. In the context of aquatic microbiology, we discuss three applications of ASTs: windows on the microbial world, adaptive sampling and adaptive management. We challenge microbial ecologists to push AST potential in helping to reveal relationships between microbial structure and function.

The future of transportation in society: Forces of change

NASA Technical Reports Server (NTRS)

Richardson, Barbara C.

1996-01-01

The transportation system is a critical element of the social / political / economic system of the United States. Factors influencing the use of transportation technology include technology push, market pull, and external factors. In order for new transportation technology to be successful, it must meet the needs of the market. These needs are diverse and vary almost by individual. Historical trends show great changes in transportation use by mode and origins and destinations of trips. Other important changes in society affecting transportation use include changes in the composition of society by gender, age, national origin, family composition, land use, income, and residential distribution. Changes of these factors in the future and how technology is deployed to meet the changing needs of society will affect the success of transportation technology implementation over the next twenty years.

Temperate forest health in an era of emerging megadisturbance

Treesearch

C. I. Millar; N. L. Stephenson

2015-01-01

Although disturbances such as fire and native insects can contribute to natural dynamics of forest health, exceptional droughts, directly and in combination with other disturbance factors, are pushing some temperate forests beyond thresholds of sustainability. Interactions from increasing temperatures, drought, native insects and pathogens, and uncharacteristically...

Comparison of delayed versus immediate pushing during second stage of labor for nulliparous women with epidural anesthesia.

PubMed

Gillesby, Erica; Burns, Suzan; Dempsey, Amy; Kirby, Shirley; Mogensen, Kami; Naylor, Kelly; Petrella, Joann; Vanicelli, Rebecca; Whelan, Breon

2010-01-01

To determine if the use of delayed pushing after the onset of the second stage of labor decreases the time of active pushing and decreases maternal fatigue. Randomized clinical trial. Labor and delivery unit of a not-for-profit community hospital. Convenience sample of nulliparous laboring women with epidural anesthesia. Immediate or delayed pushing (2 hours) during the second stage of labor at the time of complete cervical dilatation. The length of pushing, total length of the second stage, and maternal fatigue. A total of 77 women were studied (immediate pushing group=39; delayed pushing=38). The immediate pushing group averaged 94 (± 57) minutes in active pushing, while the delayed pushing group averaged 68 (± 46) minutes, a statistically significant difference (p=.04). No significant differences were found in fatigue scores between the immediate and delayed pushing groups (p>.05). We found that by delaying the onset of active pushing for 2 hours after the beginning of the second stage of labor, the time that nulliparous women with epidural anesthesia spent in active pushing was significantly decreased by 27%. Although the delayed pushing group rested for up to 2 hours, the total time in the second stage of labor averaged only 59 minutes longer than the immediate pushing group. © 2010 AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses.

New Generation of Broadcasting Satellite Systems: New Markets and Business Developments

NASA Astrophysics Data System (ADS)

Perrot, Bruno; Michel, Cyril; Villaret, Stéfanie

2002-01-01

Since the deployment of the first Digital Broadcasting Satellite Systems, European satellite operators and service providers have been faced with the continuously increasing demand for Digital Broadcasting Services. Their success is built on the availability of the MPEG and DVB standards. Undoubtedly, conventional digital television broadcasting is today the `Killer' application. Various service providers already offer multimedia applications through DVB-S systems based upon the `Push' technology. Although these services do not currently represent the core business for broadcasting satellite operators, their percentage is increasing. `Push' technology services include Data Carousel, Webcasting, Turbo Internet, File casting and so on. Such technology can support the implementation of different emerging multimedia services scenarios from Newsgroups, Network collaborative learning, and tele-medicine, to others that may be invented in the near future. The penetration rate of multi-channel television reception is still increasing. Broadcasting satellites benefit both from the development of new, more segmented and sophisticated offers and from the development of Internet services. Satellite is likely to enter these new markets at different levels of the value chain: Even if the satellite has demonstrated its capacity to fully serve the television, combinations with other networks may be necessary to address the new markets: at the consumer premises, Internet-related services will require a return path; at the backbone level, satellite becomes a component of a full telecommunications solution. This article focuses on the European market and proposes:

Push/Push Fastener

NASA Technical Reports Server (NTRS)

Jackson, Steven A.

1996-01-01

Modified version of Nylatch (or equivalent) commerical quick-connect/quick-disconnect fastener for joining flat panels. Fastener tightened by pushing on knob on one side and loosened by pushing on knob on other side. Push/push operation of fastener advantageous in cold or otherwise hostile environments where gloves worn, in underwater operations, or if person handicapped.

Nuclear Technology Requires Control by the People, anywhere on Our Planet.

NASA Astrophysics Data System (ADS)

Synek, Miroslav

2000-03-01

------- Human society on our planet, in its historical development, utilizing the knowledge of physics, has reached a powerful technology of nuclear intercontinental ballistic missiles, conceivably controllable through a computerized "push-button". Whenever this technology falls under the control of an irresponsible , miscalculating, or, insane, DICTATOR, with powerful means of a mass-produced nuclear built-up, anywhere on our planet, the very survival of all humanity on our planet could be threatened. --- Therefore, it is a historical urgency that this technology is under the control by a government of the people, by the people and for the people, based on a sufficiently secure system of FREE ELECTIONS, in any country on our planet, wherever and whenever such a threatening possibility exists.

Evolving technologies in robotic surgery for minimally invasive treatment of gynecologic cancers.

PubMed

Levinson, Kimberly L; Auer, Melinda; Escobar, Pedro F

2013-09-01

Since the introduction of robotic technology, there have been significant changes to the field of gynecologic oncology. The number of minimally invasive procedures has drastically increased, with robotic procedures rising remarkably. With recent evidence suggesting that minimally invasive techniques should be the standard of care for early endometrial and cervical cancers, the push for new technology and advancements has continued. Several emerging robotic technologies have significant potential in the field of gynecologic oncology. The single-site robotic platform enables robotic surgery through a single incision; the Firefly camera detects the fluorescent dye indocyanine green, which may improve sensitivity in sentinel lymph node biopsy; and a robotic vessel-sealing device and stapler will continue to improve efficiency of the robotic surgeon.

Next generation dilatometer for highest accuracy thermal expansion measurement of ZERODUR®

NASA Astrophysics Data System (ADS)

Jedamzik, Ralf; Engel, Axel; Kunisch, Clemens; Westenberger, Gerhard; Fischer, Peter; Westerhoff, Thomas

2015-09-01

In the recent years, the ever tighter tolerance for the Coefficient of thermal expansion (CTE) of IC Lithography component materials is requesting significant progress in the metrology accuracy to determine this property as requested. ZERODUR® is known for its extremely low CTE between 0°C to 50°C. The current measurement of the thermal expansion coefficient is done using push rod dilatometer measurement systems developed at SCHOTT. In recent years measurements have been published showing the excellent CTE homogeneity of ZERODUR® in the one-digit ppb/K range using these systems. The verifiable homogeneity was limited by the CTE(0°C, 50°C) measurement repeatability in the range of ± 1.2 ppb/K of the current improved push rod dilatometer setup using an optical interferometer as detector instead of an inductive coil. With ZERODUR® TAILORED, SCHOTT introduced a low thermal expansion material grade that can be adapted to individual customer application temperature profiles. The basis for this product is a model that has been developed in 2010 for better understanding of the thermal expansion behavior under given temperature versus time conditions. The CTE behavior predicted by the model has proven to be in very good alignment with the data determined in the thermal expansions measurements. The measurements to determine the data feeding the model require a dilatometer setup with excellent stability and accuracy for long measurement times of several days. In the past few years SCHOTT spent a lot of effort to drive a dilatometer measurement technology based on the push rod setup to its limit, to fulfill the continuously demand for higher CTE accuracy and deeper material knowledge of ZERODUR®. This paper reports on the status of the dilatometer technology development at SCHOTT.

Effects of pushing techniques in birth on mother and fetus: a randomized study.

PubMed

Yildirim, Gulay; Beji, Nezihe Kizilkaya

2008-03-01

The Valsalva pushing technique is used routinely in the second stage of labor in many countries, and it is accepted as standard obstetric management in Turkey. The purpose of this study was to determine the effects of pushing techniques on mother and fetus in birth in this setting. This randomized study was conducted between July 2003 and June 2004 in Bakirkoy Maternity and Children's Teaching Hospital in Istanbul, Turkey. One hundred low-risk primiparas between 38 and 42 weeks' gestation, who expected a spontaneous vaginal delivery, were randomized to either a spontaneous pushing group or a Valsalva-type pushing group. Spontaneous pushing women were informed during the first stage of labor about spontaneous pushing technique (open glottis pushing while breathing out) and were supported in pushing spontaneously in the second stage of labor. Similarly, Valsalva pushing women were informed during the first stage of labor about the Valsalva pushing technique (closed glottis pushing while holding their breath) and were supported in using Valsalva pushing in the second stage of labor. Perineal tears, postpartum hemorrhage, and hemoglobin levels were evaluated in mothers; and umbilical artery pH, Po(2) (mmHg), and Pco(2) (mmHg) levels and Apgar scores at 1 and 5 minutes were evaluated in newborns in both groups. No significant differences were found between the two groups in their demographics, incidence of nonreassuring fetal surveillance patterns, or use of oxytocin. The second stage of labor and duration of the expulsion phase were significantly longer with Valsalva-type pushing. Differences in the incidence of episiotomy, perineal tears, or postpartum hemorrhage were not significant between the groups. The baby fared better with spontaneous pushing, with higher 1- and 5-minute Apgar scores, and higher umbilical cord pH and Po(2) levels. After the birth, women expressed greater satisfaction with spontaneous pushing. Educating women about the spontaneous pushing technique in the first stage of labor and providing support for spontaneous pushing in the second stage result in a shorter second stage without interventions and in improved newborn outcomes. Women also stated that they pushed more effectively with the spontaneous pushing technique.

The science, technology and research network (STARNET) a searchable thematic compilation of web resources

USGS Publications Warehouse

Blados, W.R.; Cotter, G.A.; Hermann, T.

2007-01-01

International alliances in space efforts have resulted in a more rapid diffusion of space technology. This, in turn, increases pressure on organizations to push forward with technological developments and to take steps to maximize their inclusion into the research and development (R&D) process and the overall advancement and enhancement of space technology. To cope with this vast and rapidly growing amount of data and information that is vital to the success of the innovation, the Information Management Committee (IMC) of the Research Technology Agency (RTA) developed the science, technology and research network (STARNET). The purpose of this network is to facilitate access to worldwide information elements in terms of science, technology and overall research. It provides a virtual library with special emphasis on international security; a "one stop" information resource for policy makers, program managers, scientists, engineers, researchers and others. ?? 2007 IEEE.

Interplay between Mach cone and radial expansion in jet events

NASA Astrophysics Data System (ADS)

Tachibana, Y.; Hirano, T.

2016-12-01

We study the hydrodynamic response to jet propagation in the expanding QGP and investigate how the particle spectra after the hydrodynamic evolution of the QGP reflect it. We perform simulations of the space-time evolution of the QGP in gamma-jet events by solving (3+1)-dimensional ideal hydrodynamic equations with source terms. Mach cone is induced by the jet energy deposition and pushes back the radial flow of the expanding background. Especially in the case when the jet passage is off-central one, the number of particles emitted in the direction of the push back decreases. This is the signal including the information about the formation of the Mach cone and the jet passage in the QGP fluid.

Laser pushing or pulling of absorbing airborne particles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Chuji, E-mail: cw175@msstate.edu; Gong, Zhiyong; Pan, Yong-Le

2016-07-04

A single absorbing particle formed by carbon nanotubes in the size range of 10–50 μm is trapped in air by a laser trapping beam and concurrently illuminated by another laser manipulating beam. When the trapping beam is terminated, the movement of the particle controlled by the manipulating beam is investigated. We report our observations of light-controlled pushing and pulling motions. We show that the movement direction has little relationship with the particle size and manipulating beam's parameters but is dominated by the particle's orientation and morphology. With this observation, the controllable optical manipulation is now able to be generalized to arbitrarymore » particles, including irregularly shaped absorbing particles that are shown in this work.« less

PNNLs Data Intensive Computing research battles Homeland Security threats

ScienceCinema

David Thurman; Joe Kielman; Katherine Wolf; David Atkinson

2018-05-11

The Pacific Northwest National Laboratorys (PNNL's) approach to data intensive computing (DIC) is focused on three key research areas: hybrid hardware architecture, software architectures, and analytic algorithms. Advancements in these areas will help to address, and solve, DIC issues associated with capturing, managing, analyzing and understanding, in near real time, data at volumes and rates that push the frontiers of current technologies.

Street-Legal Bike Pusher Introduces EV Technology

ERIC Educational Resources Information Center

Moore, Tim

2011-01-01

The electric bicycle pusher is a legal bicycle trailer on wheels that can push a bicycle at speeds of up to 35 mph. People across the country are buying small electric cars that go no faster than that--and paying five times more than what one pays to make an electric bicycle pusher. In this article, the author provides some information on electric…

2016 Summer Series - Terry Fong - Planetary Exploration Reinvented

NASA Image and Video Library

2016-07-07

The allure of deep space drives humanity’s curiosity to further explore the universe, but the risks associated with spaceflight are still limiting. Technological advancements in robotics and data processing are pushing the envelope of Human planetary exploration and habitation. Dr. Terry Fong from the NASA Ames’ Intelligent Robotics Group will describe how we are reinventing the approach to explore the universe.

Examining the University: EUI at the Confluence of Student Research, Institutional Critique, Pedagogical Community-Building and Technological Change

ERIC Educational Resources Information Center

Cain, Timothy Reese

2013-01-01

This concluding contribution to the special issue on the Ethnography of the University Initiative based at the University of Illinois locates the project at the intersections of several of the main currents in modern higher education: the push for undergraduate research, calls for critical inquiry into higher education, an interest in pedagogical…

Supporting Integrated STEM in the Elementary Classroom: A Professional Development Approach Centered on an Engineering Design Challenge

ERIC Educational Resources Information Center

Estapa, Anne T.; Tank, Kristina M.

2017-01-01

Background: Science, technology, engineering, and mathematics (STEM) education is becoming more prevalent at the elementary level, and there has been a push to focus on the integration between the STEM disciplines. Researchers within this study sought to understand the extent to which triads composed of a classroom teacher, student teacher, and an…

Teacher Conceptions of Integrated STEM Education and How They Are Reflected in Integrated STEM Curriculum Writing and Classroom Implementation

ERIC Educational Resources Information Center

Ring, Elizabeth A.

2017-01-01

There has been a nation-wide push for an increase in the use of integrated science, technology, engineering, and mathematics (STEM) education in the United States. With this shift in epistemological, pedagogical, and curricular content, there is a need to develop an understanding as to what integrated STEM education is, particularly among…

Needs Assessment for Health Care Management Education in Russia

ERIC Educational Resources Information Center

Rekhter, Natalia; Togunov, Igor A.

2006-01-01

Introduction: For more than 70 years, health care management in the Soviet Union reflected a centralized directive style familiar to the Soviet political system. Market-oriented reform in post-Soviet Russia is pushing practicing physicians and physician-executives to acquire new information and skills regarding health care management. To assist…

MINERAL PARAGENESIS OF FINE-GRAINED PRECIPITATES IN PERMEABLE REACTIVE BARRIERS OF ZERO-VALENT IRON

EPA Science Inventory

U.S. EPA (Environmental Protection Agency) staff developed a field procedure to measure hydraulic conductivity using a direct-push system to obtain vertical profiles of hydraulic conductivity. Vertical profiles were obtained using an in situ field device-composed of a
Geopr...

Directional Flow of Summer Aeration to Manage Insect Pests in Stored Wheat

USDA-ARS?s Scientific Manuscript database

Field trials were conducted in metal wheat storage bins to determine whether pressure aeration, pushing ambient air from the bottom, or suction aeration, pulling air down from the top, would be more efficient at cooling the wheat mass and thereby limiting insect population growth. Aeration was accom...

Ecosystem services: a new NRS-FIA analytical science initiative

Treesearch

Brian G. Tavernia; Mark D. Nelson; James D. Garner

2015-01-01

Forest ecosystem services (ES) are linked to sustaining human well-being. Recognizing an inappropriate economic valuation of ecosystem properties and processes, many ecologists, economists, and political scientists have pushed for an increasing awareness and appreciation of ES. Many definitions of ES include both direct and indirect benefits humans derive from...

DefenseLink Feature:

Science.gov Websites

Democracies President George W. Bush shakes hands with President Stjepan Mesic of Croatia during arrival today. Story NATO Members Debate Direction of Alliance President George W. Bush talks with Defense . Story Bush Pushes NATO To Accept Balkan Nations President George W. Bush emphasizes a point as he

SUBSURFACE CHARACTERIZATION OF UPLAND RIPARIAN MEADOWS IN CENTRAL NEVADA USING AN INNOVATIVE DIRECT-PUSH EXPLORATION RIG

EPA Science Inventory

The U.S. EPA and the USDA Forest Service are conducting a joint investigation to better understand the interactions between geomorphology, hydrology, and vegetation associated with riparian meadow ecosystems in upland watersheds in central Nevada. Stream incision is a major threa...

USING DIRECT-PUSH TOOLS TO MAP HYDROSTRATIGRAPHY AND PREDICT MTBE PLUME DIVING

EPA Science Inventory

Conventional wells for monitoring MTBE contamination at underground storage tank sites are screened a few feet above and a few feet below the water table. At some sites, a plume of contamination in ground water may dive below the screen of conventional monitoring wells and escap...

SUMMARY OF TECHNIQUES AND UNIQUE USES FOR DIRECT PUSH METHODS IN SITE CHARACTERIZATION ON CONTAMINATED FIELD SITES

EPA Science Inventory

Site characterization of subsurface contaminant transport is often hampered by a lack of knowledge of site heterogeneity and temporal variations in hydrogeochemistry. Two case studies are reviewed to illustrate the utility of macro-scale mapping information along with spatially-...

Factors Associated With Callus in Patients with Diabetes, Focused on Plantar Shear Stress During Gait.

PubMed

Hamatani, Masako; Mori, Taketoshi; Oe, Makoto; Noguchi, Hiroshi; Takehara, Kimie; Amemiya, Ayumi; Ohashi, Yumiko; Ueki, Kohjiro; Kadowaki, Takashi; Sanada, Hiromi

2016-11-01

The aim of this study is to identify whether plantar shear stress in neuropathic patients with diabetes with callus is increased compared with those without callus. The differences in foot deformity, limited joint mobility, repetitive stress of walking, and ill-fitting shoes between patients with callus and those without callus were also determined. Subjects were recruited from the Diabetic Foot Outpatient Clinic. A newly developed in-shoe measurement system, which has flexible and thin insoles, enabled measurement of both plantar pressure and shear stress simultaneously when subjects walked as usual on a 10 m walkway. It was found that plantar shear stress adjusted for weight during the push-off phase was increased by 1.32 times in patients with callus compared with those without callus (mean ± SD: 0.0500 ± 0.0160 vs 0.0380 ± 0.0144, P = .031). Moreover, hallux valgus deformity, reduction in dorsiflexion of the ankle joint and increase in plantar flexion were showed in feet with callus. Increased plantar shear stress may be caused by gait change that patients having callus push off with the metatarsal head instead of the toe as a result of foot deformity and limited joint mobility. It was found that plantar shear stress adjusted for weight during the push-off phase was increased in patients with callus compared with those without callus by using the newly developed measurement system. These results suggest that reduction of plantar shear stress during the push-off phase can prevent callus formation in neuropathic patients with diabetes. © 2016 Diabetes Technology Society.

33 CFR 90.3 - Pushing vessel and vessel being pushed: Composite unit.

Code of Federal Regulations, 2010 CFR

2010-07-01

... pushed: Composite unit. 90.3 Section 90.3 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF... vessel being pushed: Composite unit. Rule 24(b) of the Inland Rules states that when a pushing vessel and a vessel being pushed ahead are rigidly connected in a composite unit, they are regarded as a power...

33 CFR 82.3 - Pushing vessel and vessel being pushed: Composite unit.

Code of Federal Regulations, 2010 CFR

2010-07-01

... pushed: Composite unit. 82.3 Section 82.3 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF... vessel being pushed: Composite unit. Rule 24(b) of the 72 COLREGS states that when a pushing vessel and a vessel being pushed ahead are rigidly connected in a composite unit, they are regarded as a power-driven...

Turbine Engine Clearance Control Systems: Current Practices and Future Directions

NASA Astrophysics Data System (ADS)

Lattime, Scott B.; Steinetz, Bruce M.

2002-09-01

Improved blade tip sealing in the high pressure compressor (HPC) and high pressure turbine (HPT) can provide dramatic reductions in specific fuel consumption (SFC), time-on-wing, compressor stall margin, and engine efficiency as well as increased payload and mission range capabilities. Maintenance costs to overhaul large commercial gas turbine engines can easily exceed 1M. Engine removal from service is primarily due to spent exhaust gas temperature (EGT) margin caused mainly by the deterioration of HPT components. Increased blade tip clearance is a major factor in hot section component degradation. As engine designs continue to push the performance envelope with fewer parts and the market drives manufacturers to increase service life, the need for advanced sealing continues to grow. A review of aero gas turbine engine HPT performance degradation and the mechanisms that promote these losses are discussed. Benefits to the HPT due to improved clearance management are identified. Past and present sealing technologies are presented along with specifications for next generation engine clearance control systems.

Turbine Engine Clearance Control Systems: Current Practices and Future Directions

NASA Technical Reports Server (NTRS)

Lattime, Scott B.; Steinetz, Bruce M.

2002-01-01

Improved blade tip sealing in the high pressure compressor (HPC) and high pressure turbine (HPT) can provide dramatic reductions in specific fuel consumption (SFC), time-on-wing, compressor stall margin, and engine efficiency as well as increased payload and mission range capabilities. Maintenance costs to overhaul large commercial gas turbine engines can easily exceed $1M. Engine removal from service is primarily due to spent exhaust gas temperature (EGT) margin caused mainly by the deterioration of HPT components. Increased blade tip clearance is a major factor in hot section component degradation. As engine designs continue to push the performance envelope with fewer parts and the market drives manufacturers to increase service life, the need for advanced sealing continues to grow. A review of aero gas turbine engine HPT performance degradation and the mechanisms that promote these losses are discussed. Benefits to the HPT due to improved clearance management are identified. Past and present sealing technologies are presented along with specifications for next generation engine clearance control systems.

Design of a medium size x-ray mirror module based on thin glass foils

NASA Astrophysics Data System (ADS)

Basso, Stefano; Civitani, Marta; Pareschi, Giovanni

2016-07-01

The hot slumping glass technology for X-ray mirror is under development and in the last years the results have been improved. Nustar is the first X-ray telescope based on slumped glass foils and it benefit is the low cost compared to the direct polishing of glass. With the slumping technique it is possible to maintain the glass mass to low values with respect to the direct polishing, but in general the angular resolution is worst. A further technique based on glass is the cold shaping of foils. The improved capabilities of manufacturing thin glass foils, pushed by the industrial application for screens, open new possibilities for X-ray mirror. The increase in strength of thin tempered glasses, the reduction of thickness errors and the good roughness of flat foils are potentially great advantages. In this paper a design of a mediumsize X-ray mirror module is analysed. It is based on integration of glass foils, stacked directly on a supporting structure that is part of the X-ray telescope using stiffening ribs as spacer between foils. The alignment of each stack is performed directly into the integration machine avoiding the necessity of the alignment of different stacked modules. A typical module (glass optic and metallic structure) provides an effective area of 10 cm2/kg at 1 keV (with a mass of about 50- 100 kg and a focal length of 10 m).

Dynamic thermal field-induced gradient soft-shear for highly oriented block copolymer thin films.

PubMed

Singh, Gurpreet; Yager, Kevin G; Berry, Brian; Kim, Ho-Cheol; Karim, Alamgir

2012-11-27

As demand for smaller, more powerful, and energy-efficient devices continues, conventional patterning technologies are pushing up against fundamental limits. Block copolymers (BCPs) are considered prime candidates for a potential solution via directed self-assembly of nanostructures. We introduce here a facile directed self-assembly method to rapidly fabricate unidirectionally aligned BCP nanopatterns at large scale, on rigid or flexible template-free substrates via a thermally induced dynamic gradient soft-shear field. A localized differential thermal expansion at the interface between a BCP film and a confining polydimethylsiloxane (PDMS) layer due to a dynamic thermal field imposes the gradient soft-shear field. PDMS undergoes directional expansion (along the annealing direction) in the heating zone and contracts back in the cooling zone, thus setting up a single cycle of oscillatory shear (maximum lateral shear stress ∼12 × 10(4) Pa) in the system. We successfully apply this process to create unidirectional alignment of BCP thin films over a wide range of thicknesses (nm to μm) and processing speeds (μm/s to mm/s) using both a flat and patterned PDMS layer. Grazing incidence small-angle X-ray scattering measurements show absolutely no sign of isotropic population and reveal ≥99% aligned orientational order with an angular spread Δθ(fwhm) ≤ 5° (full width at half-maximum). This method may pave the way to practical industrial use of hierarchically patterned BCP nanostructures.

Scapular kinematics and muscle activities during pushing tasks.

PubMed

Huang, Chun-Kai; Siu, Ka-Chun; Lien, Hen-Yu; Lee, Yun-Ju; Lin, Yang-Hua

2013-01-01

Pushing tasks are functional activities of daily living. However, shoulder complaints exist among workers exposed to regular pushing conditions. It is crucial to investigate the control of shoulder girdles during pushing tasks. The objective of the study was to demonstrate scapular muscle activities and motions on the dominant side during pushing tasks and the relationship between scapular kinematics and muscle activities in different pushing conditions. Thirty healthy adults were recruited to push a four-wheel cart in six pushing conditions. The electromyographic signals of the upper trapezius (UT) and serratus anterior (SA) muscles were recorded. A video-based system was used for measuring the movement of the shoulder girdle and scapular kinematics. Differences in scapular kinematics and muscle activities due to the effects of handle heights and weights of the cart were analyzed using two-way ANOVA with repeated measures. The relationships between scapular kinematics and muscle activities were examined by Pearson's correlation coefficients. The changes in upper trapezius and serratus anterior muscle activities increased significantly with increased pushing weights in the one-step pushing phase. The UT/SA ratio on the dominant side decreases significantly with increased handle heights in the one-step pushing phase. The changes in upward rotation, lateral slide and elevation of the scapula decreased with increased pushing loads in the trunk-forward pushing phase. This study indicated that increased pushing loads result in decreased motions of upward rotation, lateral slide and elevation of the scapula; decreased handle heights result in relatively increased activities of the serratus anterior muscles during pushing tasks.

The power of virtual integration: an interview with Dell Computer's Michael Dell. Interview by Joan Magretta.

PubMed

Dell, M

1998-01-01

Michael Dell started his computer company in 1984 with a simple business insight. He could bypass the dealer channel through which personal computers were then being sold and sell directly to customers, building products to order. Dell's direct model eliminated the dealer's markup and the risks associated with carrying large inventories of finished goods. In this interview, Michael Dell provides a detailed description of how his company is pushing that business model one step further, toward what he calls virtual integration. Dell is using technology and information to blur the traditional boundaries in the value chain between suppliers, manufacturers, and customers. The individual pieces of Dell's strategy--customer focus, supplier partnerships, mass customization, just-in-time manufacturing--may be all be familiar. But Michael Dell's business insight into how to combine them is highly innovative. Direct relationships with customers create valuable information, which in turn allows the company to coordinate its entire value chain back through manufacturing to product design. Dell describes how his company has come to achieve this tight coordination without the "drag effect" of ownership. Dell reaps the advantages of being vertically integrated without incurring the costs, all the while achieving the focus, agility, and speed of a virtual organization. As envisioned by Michael Dell, virtual integration may well become a new organizational model for the information age.

Navigating Currents and Charting Directions. Proceedings of the Annual Conference of the Mathematics Education Research Group of Australasia (31st, Brisbane, Queensland, Australia, June 28-July 1, 2008). Volumes 1 and 2

ERIC Educational Resources Information Center

Goos, Merrilyn, Ed.; Brown, Ray, Ed.; Makar, Katie, Ed.

2008-01-01

This document presents the proceedings of the 31st Annual Conference of the Mathematics Education Research Group of Australasia (MERGA). The theme of this conference is "Navigating Currents and Charting Directions." The theme reminds us that, although we are constantly pushed to account for the quality and impact of our research, we…

The Wire-Grasping Method as a New Technique for Forceps Biopsy of Biliary Strictures: A Prospective Randomized Controlled Study of Effectiveness

PubMed Central

Yamashita, Yasunobu; Ueda, Kazuki; Kawaji, Yuki; Tamura, Takashi; Itonaga, Masahiro; Yoshida, Takeichi; Maeda, Hiroki; Magari, Hirohito; Maekita, Takao; Iguchi, Mikitaka; Tamai, Hideyuki; Ichinose, Masao; Kato, Jun

2016-01-01

Background/Aims Transpapillary forceps biopsy is an effective diagnostic technique in patients with biliary stricture. This prospective study aimed to determine the usefulness of the wire-grasping method as a new technique for forceps biopsy. Methods Consecutive patients with biliary stricture or irregularities of the bile duct wall were randomly allocated to either the direct or wire-grasping method group. In the wire-grasping method, forceps in the duodenum grasps a guide-wire placed into the bile duct beforehand, and then, the forceps are pushed through the papilla without endoscopic sphincterotomy. In the direct method, forceps are directly pushed into the bile duct alongside a guide-wire. The primary endpoint was the success rate of obtaining specimens suitable for adequate pathological examination. Results In total, 32 patients were enrolled, and 28 (14 in each group) were eligible for analysis. The success rate was significantly higher using the wire-grasping method than the direct method (100% vs 50%, p=0.016). Sensitivity and accuracy for the diagnosis of cancer were comparable in patients with the successful procurement of biopsy specimens between the two methods (91% vs 83% and 93% vs 86%, respectively). Conclusions The wire-grasping method is useful for diagnosing patients with biliary stricture or irregularities of the bile duct wall. PMID:27021502

Fundamental studies on a novel die concept for round-point shear-clinching

NASA Astrophysics Data System (ADS)

Hörhold, Réjane; Müller, Martin; Merklein, Marion; Meschut, Gerson

2016-10-01

A newly-developed round-point shear-clinching technology could increase the use of different materials like well formable aluminium and hardly formable ultra-high-strength steels (UHSS). This innovative technology joins in a single-stage process without any pilot-hole, surface pre-treatment or auxiliary joining part. The combination of an inner and outer punch realises an indirect cutting operation of the die-sided material, whereas the punch-sided material remains unharmed. The current die-sided tool set acts as a cutting die and enables a radial extrusion of the punch-sided material after being drawn though the created hole in the UHSS. The die has a fixed die depth. After ejecting the joined components, the slug has to be removed from the top of the spring-loaded anvil. The novel die concept investigated in this paper offers the possibility to push the slug continuously through the die in the joining direction. The removed slugs remain inside the die, so manual removal is unnecessary. The one-parted tool is supposed to be more robust than the multi-parted one that is currently used. This paper represents the task to evaluate the geometry of a useful shear-clinching die concept. To reduce the experimental effort, FEM should assist the development of the most promising approach. To quantify the success, conventional shear-clinching with opening die acts as a reference. The results show the high potential and the raison d'être of shear-clinching technologies as a mechanical joining technology for future multimaterial applications especially for UHSS.

Effect of Breathing Technique of Blowing on the Extent of Damage to the Perineum at the Moment of Delivery: A Randomized Clinical Trial

PubMed Central

Ahmadi, Zohre; Torkzahrani, Shahnaz; Roosta, Firouze; Shakeri, Nezhat; Mhmoodi, Zohre

2017-01-01

Introduction: One of the important tasks in managing labor is the protection of perineum. An important variable affecting this outcome is maternal pushing during the second stage of labor. This study was done to investigate the effect of breathing technique on perineal damage extention in laboring Iranian women. Materials and Methods: This randomized clinical trial was performed on 166 nulliparous pregnant women who had reached full-term pregnancy, had low risk pregnancy, and were candidates for vaginal delivery in two following groups: using breathing techniques (case group) and valsalva maneuver (control group). In the control group, pushing was done with holding the breath. In the case group, the women were asked to take 2 deep abdominal breaths at the onset of pain, then take another deep breath, and push 4–5 seconds with the open mouth while controlling exhalation. From the crowning stage onward, the women were directed to control their pushing, and do the blowing technique. Results: According to the results, intact perineum was more observed in the case group (P = 0.002). Posterior tears (Grade 1, 2, and 3) was considerably higher in the control group (P = 0.003). Anterior tears (labias) and episiotomy were not significantly different in the two groups. Conclusions: It was concluded that breathing technique of blowing can be a good alternative to Valsalva maneuver in order to reduce perineal damage in laboring women. PMID:28382061

Efficacy of different irrigation regimes on the push-out bond strength of various resin-based sealers at different root levels: An in vitro study.

PubMed

Verma, Diksha; Taneja, Sonali; Kumari, Manju

2018-01-01

This study aims to evaluate and compare the efficacy of various irrigation regimens on push-out bond strength of AH Plus/gutta-percha, Real Seal/Resilon, and MetaSeal/gutta-percha at three different root levels. Single-rooted mandibular premolars ( n = 120) were prepared and divided into four groups ( n = 30) based on irrigation regimen used: I: 5.25% sodium hypochlorite (NaOCl)-17% ethylenediaminetetraacetic acid (EDTA); II: 5.25% NaOCl-2.25% Peracetic acid (PAA); III: 5.25% NaOCl-18% 1-hydroxyethylidene-1, 1-bisphosphonate (HEBP) (Etidronic Acid); and IV: Distilled Water. Each group was further divided into three subgroups ( n = 10); A: AH Plus/gutta-percha; B: MetaSEAL/gutta-percha; C: RealSeal/Resilon. After obturation, roots were sectioned at 3 levels and push-out tests were performed. One-way ANOVA with post hoc Tukey-honestly significant difference tests were applied to assess the significance among various groups. Among irrigants, 2.25% PAA showed significantly lower values when compared with rest of the irrigants. There was no significant difference found among EDTA and HEBP. The push-out bond strength of AH Plus was significantly higher among all sealers. The bond strength values were significantly decreased in apico-coronal direction. There was superior efficacy of EDTA and HEBP on the bond strength of AH Plus at apical root level when compared with other irrigants and sealers at various root levels.

Manual handling: differences in perceived effort, success rate and kinematics between three different pushing techniques.

PubMed

Varcin, Lynn; Claus, Andrew; van den Hoorn, Wolbert; Hodges, Paul

2015-01-01

This study examined the perceived effort, success rates and kinematics for three push strategies in a simulated lateral patient transfer (horizontal slide). Thirteen healthy subjects (four males) completed three repetition pushing loads of 6, 10 and 14 kg in random order; with a spontaneous push strategy, then with a straight-back bent-knees (squat) strategy and the preparatory pelvic movement ('rockback') strategy in random order. Perceived effort and kinematic parameters measured at the onset of movement and at maximum push excursion were compared between strategies and between loads with repeated measures ANOVA. The spontaneous and 'rockback' strategies achieved the pushing task with less perceived effort across all loads than the squat push (P < 0.001). Only 3/13 participants were successful on all attempts at pushing the 14 kg load using a squat strategy, which contrasted with 12/13 participants when the spontaneous strategy or the 'rockback' strategy was used. Forward movement of the pelvis and forward trunk inclination may be positively associated with lower perceived effort in the push task. Practitioner Summary: In a manual-handling task that simulated a lateral patient transfer (horizontal slide), perceived effort and success rates of three push strategies were compared. A straight-back bent-knees push (squat) strategy demonstrated greater perceived effort and lower success rates than a spontaneous push strategy, or a push strategy with preparatory 'rockback' pelvic movement.

Contribution of limb momentum to power transfer in athletic wheelchair pushing.

PubMed

Masson, G; Bégin, M-A; Lopez Poncelas, M; Pelletier, S-K; Lessard, J-L; Laroche, J; Berrigan, F; Langelier, E; Smeesters, C; Rancourt, D

2016-09-06

Pushing capacity is a key parameter in athletic racing wheelchair performance. This study estimated the potential contribution of upper limb momentum to pushing. The question is relevant since it may affect the training strategy adopted by an athlete. A muscle-free Lagrangian dynamic model of the upper limb segments was developed and theoretical predictions of power transfer to the wheelchair were computed during the push phase. Results show that limb momentum capacity for pushing can be in the order of 40J per push cycle at 10m/s, but it varies with the specific pushing range chosen by the athlete. Although use of momentum could certainly help an athlete improve performance, quantifying the actual contribution of limb momentum to pushing is not trivial. A preliminary experimental investigation on an ergometer, along with a simplified model of the upper limb, suggests that momentum is not the sole contributor to power transfer to a wheelchair. Muscles substantially contribute to pushing, even at high speeds. Moreover, an optimal pushing range is challenging to find since it most likely differs if an athlete chooses a limb momentum pushing strategy versus a muscular exertion pushing strategy, or both at the same time. The study emphasizes the importance of controlling pushing range, although one should optimize it while also taking the dynamics of the recovery period into account. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effects of pushing techniques during the second stage of labor: A randomized controlled trial.

PubMed

Koyucu, Refika Genç; Demirci, Nurdan

2017-10-01

Spontaneous pushing is a method that is used in the management of the second stage of labor and suggested to be more physiological for the mother and infant. The present study aims to evaluate the effects of pushing techniques on the mother and newborn. This randomized prospective study was performed between June 2013-March 2014 in a tertiary maternity clinic in Istanbul. 80 low risk, nulliparous cases were randomized to pushing groups. Valsalva pushing group was told to hold their breath while pushing. No visual-verbal instructions were given to spontaneous pushing group and they were encouraged to push without preventing respiration. Demographic data, second stage period, perineal laceration rates, fetal heart rate patterns, presence of meconium stained amniotic liquid, newborn APGAR scores, POP-Q examination and Q-tip test results were evaluated in these cases. The second stage of labor was significantly longer with spontaneous pushing. Decrease in Hb levels in valsalva pushing group was determined to be higher than spontaneous pushing group. An increased urethral mobility was observed in valsalva pushing group. Although the duration of the second stage of labor was longer compared to valsalva pushing technique, women were able to give birth without requiring any verbal or visual instruction, without exceeding the limit value of two hours and without affecting fetal wellness and neonatal results. Copyright © 2017. Published by Elsevier B.V.

The influence of push-off timing in a robotic ankle-foot prosthesis on the energetics and mechanics of walking.

PubMed

Malcolm, Philippe; Quesada, Roberto E; Caputo, Joshua M; Collins, Steven H

2015-02-22

Robotic ankle-foot prostheses that provide net positive push-off work can reduce the metabolic rate of walking for individuals with amputation, but benefits might be sensitive to push-off timing. Simple walking models suggest that preemptive push-off reduces center-of-mass work, possibly reducing metabolic rate. Studies with bilateral exoskeletons have found that push-off beginning before leading leg contact minimizes metabolic rate, but timing was not varied independently from push-off work, and the effects of push-off timing on biomechanics were not measured. Most lower-limb amputations are unilateral, which could also affect optimal timing. The goal of this study was to vary the timing of positive prosthesis push-off work in isolation and measure the effects on energetics, mechanics and muscle activity. We tested 10 able-bodied participants walking on a treadmill at 1.25 m · s(-1). Participants wore a tethered ankle-foot prosthesis emulator on one leg using a rigid boot adapter. We programmed the prosthesis to apply torque bursts that began between 46% and 56% of stride in different conditions. We iteratively adjusted torque magnitude to maintain constant net positive push-off work. When push-off began at or after leading leg contact, metabolic rate was about 10% lower than in a condition with Spring-like prosthesis behavior. When push-off began before leading leg contact, metabolic rate was not different from the Spring-like condition. Early push-off led to increased prosthesis-side vastus medialis and biceps femoris activity during push-off and increased variability in step length and prosthesis loading during push-off. Prosthesis push-off timing had no influence on intact-side leg center-of-mass collision work. Prosthesis push-off timing, isolated from push-off work, strongly affected metabolic rate, with optimal timing at or after intact-side heel contact. Increased thigh muscle activation and increased human variability appear to have caused the lack of reduction in metabolic rate when push-off was provided too early. Optimal timing with respect to opposite heel contact was not different from normal walking, but the trends in metabolic rate and center-of-mass mechanics were not consistent with simple model predictions. Optimal push-off timing should also be characterized for individuals with amputation, since meaningful benefits might be realized with improved timing.

Does delayed pushing in the second stage of labor impact perinatal outcomes?

PubMed

Frey, Heather A; Tuuli, Methodius G; Cortez, Sarah; Odibo, Anthony O; Roehl, Kimberly A; Shanks, Anthony L; Macones, George A; Cahill, Alison G

2012-11-01

To estimate maternal, neonatal, and labor outcomes associated with delayed pushing. A retrospective cohort study of all consecutive women admitted to a single institution in labor at term who reached the second stage of labor. Pregnancies with multiple fetuses or major anomalies were excluded. Delayed pushing was defined as initiation of pushing ≥60 minutes after complete dilatation. Primary outcome was mode of delivery. Multivariable logistic regression was used to control for confounding. Of the 5290 women who met inclusion criteria, 471 (8.9%) employed delayed pushing, and 4819 (91.1%) pushed immediately. Delayed pushing was associated with increased rates of cesarean, operative vaginal delivery, maternal fever, and lower arterial cord pH. Duration of the second stage and length of time spent pushing were significantly longer with delayed pushing. Delayed pushing is associated with lower rates of spontaneous vaginal delivery and increased adverse maternal and neonatal outcomes. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Enabling Innovation and Collaboration Across Geography and Culture: A Case Study of NASA's Systems Engineering Community of Practice

NASA Technical Reports Server (NTRS)

Topousis, Daria E.; Murphy, Keri; Robinson, Greg

2008-01-01

In 2004, NASA faced major knowledge sharing challenges due to geographically isolated field centers that inhibited personnel from sharing experiences and ideas. Mission failures and new directions for the agency demanded better collaborative tools. In addition, with the push to send astronauts back to the moon and to Mars, NASA recognized that systems engineering would have to improve across the agency. Of the ten field centers, seven had not built a spacecraft in over 30 years, and had lost systems engineering expertise. The Systems Engineering Community of Practice came together to capture the knowledge of its members using the suite of collaborative tools provided by the NASA Engineering Network (NEN.) The NEN provided a secure collaboration space for over 60 practitioners across the agency to assemble and review a NASA systems engineering handbook. Once the handbook was complete, they used the open community area to disseminate it. This case study explores both the technology and the social networking that made the community possible, describes technological approaches that facilitated rapid setup and low maintenance, provides best practices that other organizations could adopt, and discusses the vision for how this community will continue to collaborate across the field centers to benefit the agency as it continues exploring the solar system.

Psychophysical basis for maximum pushing and pulling forces: A review and recommendations.

PubMed

Garg, Arun; Waters, Thomas; Kapellusch, Jay; Karwowski, Waldemar

2014-03-01

The objective of this paper was to perform a comprehensive review of psychophysically determined maximum acceptable pushing and pulling forces. Factors affecting pushing and pulling forces are identified and discussed. Recent studies show a significant decrease (compared to previous studies) in maximum acceptable forces for males but not for females when pushing and pulling on a treadmill. A comparison of pushing and pulling forces measured using a high inertia cart with those measured on a treadmill shows that the pushing and pulling forces using high inertia cart are higher for males but are about the same for females. It is concluded that the recommendations of Snook and Ciriello (1991) for pushing and pulling forces are still valid and provide reasonable recommendations for ergonomics practitioners. Regression equations as a function of handle height, frequency of exertion and pushing/pulling distance are provided to estimate maximum initial and sustained forces for pushing and pulling acceptable to 75% male and female workers. At present it is not clear whether pushing or pulling should be favored. Similarly, it is not clear what handle heights would be optimal for pushing and pulling. Epidemiological studies are needed to determine relationships between psychophysically determined maximum acceptable pushing and pulling forces and risk of musculoskeletal injuries, in particular to low back and shoulders.

Psychophysical basis for maximum pushing and pulling forces: A review and recommendations

PubMed Central

Garg, Arun; Waters, Thomas; Kapellusch, Jay; Karwowski, Waldemar

2015-01-01

The objective of this paper was to perform a comprehensive review of psychophysically determined maximum acceptable pushing and pulling forces. Factors affecting pushing and pulling forces are identified and discussed. Recent studies show a significant decrease (compared to previous studies) in maximum acceptable forces for males but not for females when pushing and pulling on a treadmill. A comparison of pushing and pulling forces measured using a high inertia cart with those measured on a treadmill shows that the pushing and pulling forces using high inertia cart are higher for males but are about the same for females. It is concluded that the recommendations of Snook and Ciriello (1991) for pushing and pulling forces are still valid and provide reasonable recommendations for ergonomics practitioners. Regression equations as a function of handle height, frequency of exertion and pushing/pulling distance are provided to estimate maximum initial and sustained forces for pushing and pulling acceptable to 75% male and female workers. At present it is not clear whether pushing or pulling should be favored. Similarly, it is not clear what handle heights would be optimal for pushing and pulling. Epidemiological studies are needed to determine relationships between psychophysically determined maximum acceptable pushing and pulling forces and risk of musculoskeletal injuries, in particular to low back and shoulders. PMID:26664045

Nuclear technology requires free elections

NASA Astrophysics Data System (ADS)

Synek, Miroslav

1999-10-01

The historical development on our planet has reached a powerful technology of nuclear intercontinental ballistic missiles, conceivably controllable through a computerized ``push-button." If this technology ever falls under the control of an irresponsible, miscalculating, or insane DICTATOR, with powerful means of a mass-produced nuclear built-up, anywhere on our planet, the very SURVIVAL OF ALL HUMANITY on our planet could be threatened. Therefore, it is a historical urgency that this technology is under the control by the people, through a sufficiently secure system of FREE ELECTIONS, in any country, wherever and whenever such a threatening possibility exists. Of course, a starting system of FREE ELECTIONS, even if quite rudimentary, should try to provide for its continuous functioning, with an underlying appropriate freedom of expression and with rules for its continuation, while aiming towards continuous improvements.

"Building up Speed", "Trying to Break Free", "Pushing It through the Pipe": Using Metaphor to Explore Early Career STEM Researchers' Grant Writing Capability

ERIC Educational Resources Information Center

Mackie, Sylvia Anne; McArthur, Sally

2017-01-01

This study demonstrates the use of metaphor analysis in needs assessment for developmental support and shows how it can be used to critically examine assumptions in the literature about the ways emerging researchers conceptualize their career trajectory. We investigated the professional development needs of a group of science, technology,…

How does Innovation Push its Boundaries?

NASA Astrophysics Data System (ADS)

Youn, Hyejin

Urbanization and innovation are the most defining characteristics of our societal challenge. On one hand, ever-expanding urban built environments are centers of population growth, economic engine, and energy consumption. On the other hand, our technology advances increasingly rapidly, transforming both physical and social infrastructures into better or worse contingency. Therefore, understanding their fundamental dynamics can provide valuable insight into the nature of challenges of sustainability...

Development of Teacher Beliefs through Online Instruction: A One-Year Study of Middle School Science and Mathematics Teachers' Beliefs about Teaching and Learning

ERIC Educational Resources Information Center

Wong, Sissy S.

2016-01-01

Understanding teachers' beliefs is important because beliefs influence teacher decisions. In science, teacher beliefs have an impact on how science curriculum is interpreted and implemented in the classroom. With the push for science, technology, engineering, and mathematics (STEM) education in the United States, it is also critical to examine the…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piepenbrink, J.O.

The short time available to attack ballistic missiles with a Strategic Defense Initiative (SDI) weapon system will preclude traditional national-level decision making. A unique command and control (C2) concept is required to best serve the balance between effectiveness and weapon system safety. This article develops that concept with a blend of autonomous operation with man in the loop and advocates early resolution to ensure C2 strategy and tactics push technology development.

’Pushing a Big Rock Up a Steep Hill’: Acquisition Lessons Learned from DoD Applications Storefront

DTIC Science & Technology

2014-04-30

software patches, web applications, widgets, and mobile application packages. The envisioned application store will deliver software from a central...automated delivery of software patches, web applications, widgets, and mobile application packages. The envisioned application store will deliver... mobile technologies, hoping to enhance warfighter situational awareness and access to information. Unfortunately, the Defense Acquisition System has not

When Push Comes to Shove: A Hype-Free Guide to Evaluating Technical Solutions to Copyright Infringement on Campus Networks

ERIC Educational Resources Information Center

Electronic Frontier Foundation, 2006

2006-01-01

This paper is intended to help institutions of higher education critically evaluate the principal technological tools and policies being used to enforce copyright on campus networks. It first explores where the goals of copyright holders and universities overlap and where they conflict. It then discusses the pros and cons of the major solutions…

JPRS Report, Science & Technology, China: Energy

DTIC Science & Technology

1991-08-23

restriction. Unity push forward. Category 2 should be stabilized and of understanding is essential for promoting reform in improved. Category 3 should be...Consultative Council, everyone wasindustrial policy change, which pays more attention to extremely concerned about the situation at the Three ecnomic ...is essential for spurring economic growth As for the question of power transmission, preliminary in the region. This first of all requires development

Effect of External Loading on Force and Power Production During Plyometric Push-ups.

PubMed

Hinshaw, Taylour J; Stephenson, Mitchell L; Sha, Zhanxin; Dai, Boyi

2018-04-01

Hinshaw, TJ, Stephenson, ML, Sha, Z, and Dai, B. Effect of external loading on force and power production during plyometric push-ups. J Strength Cond Res 32(4): 1099-1108, 2018-One common exercise to train upper-body strength and power is the push-up. Training at the loads that would produce the greatest power is an effective way to increase peak power. The purpose of the current study was to quantify the changes in peak force, peak power, and peak velocity among a modified plyometric push-up and plyometric push-ups with or without external loading in physically active young adults. Eighteen male and 17 female participants completed 4 push-ups: (a) modified plyometric push-up on the knees, (b) plyometric push-up without external loading, (c) plyometric push-up with an external load of 5% of body weight, and (d) plyometric push-up with an external load of 10% of body weight. Two force platforms were set up to collect vertical ground reaction forces at the hands and feet. The modified plyometric push-up demonstrated the lowest force, power, and velocity (5.4≥ Cohen's dz ≥1.2). Peak force and force at peak velocity increased (3.8≥ Cohen's dz ≥0.3) and peak velocity and velocity at peak power decreased (1.4≥ Cohen's dz ≥0.8) for the push-up without external loading compared with the 2 push-ups with external loading. No significant differences were observed for peak power among the push-ups with or without external loading (0.4≥ Cohen's dz ≥0.1). Although peak power is similar with or without external loading, push-ups without external loading may be more beneficial for a quick movement, and push-ups with external loading may be more beneficial for a greater force production.

Current Trends on Medical and Pharmaceutical Applications of Inkjet Printing Technology.

PubMed

Scoutaris, Nicolaos; Ross, Steven; Douroumis, Dennis

2016-08-01

Inkjet printing is an attractive material deposition and patterning technology that has received significant attention in the recent years. It has been exploited for novel applications including high throughput screening, pharmaceutical formulations, medical devices and implants. Moreover, inkjet printing has been implemented in cutting-edge 3D-printing healthcare areas such as tissue engineering and regenerative medicine. Recent inkjet advances enabled 3D printing of artificial cartilage and skin, or cell constructs for transplantation therapies. In the coming years inkjet printing is anticipated to revolutionize personalized medicine and push the innovation portfolio by offering new paths in patient - specific treatments.

What Good Is Soft Evidence?

ERIC Educational Resources Information Center

Murdach, Allison D.

2010-01-01

Along with other helping professions, social work is today struggling to become a more "evidence-based" activity. This article explores some of the issues raised by this reevaluation of social work, especially as it relates to the issue of direct social work practice. Despite the current push to base social work helping methods on scientific…

Physics Teacher SOS: Supporting New Teachers without Pushing an Agenda

ERIC Educational Resources Information Center

Baird, Dean

2013-01-01

Few workshops for teachers focus primarily on instruction methods for basic high school physics. In Northern California, Physics Teacher SOS (PTSOS) has gained popularity doing just that. PTSOS workshops are directed toward early-career science teachers, though veterans are welcome too. The program is not influenced by scientific supply companies,…

Are We Ready for Charter Colleges?

ERIC Educational Resources Information Center

Sjogren, Jane; Fay, James

2010-01-01

Community colleges are under increasing pressure today from a number of directions. Student demand is at an all-time high, fueled by demographics, student and employer need for new and increased skills; structural changes in labor markets have pushed the under- or unemployed to community colleges to acquire new job skills; and students who would…

Pressurizing the STEM Pipeline: An Expectancy-Value Theory Analysis of Youths' STEM Attitudes

ERIC Educational Resources Information Center

Ball, Christopher; Huang, Kuo-Ting; Cotten, Shelia R.; Rikard, R. V.

2017-01-01

Over the past decade, there has been a strong national push to increase minority students' positive attitudes towards STEM-related careers. However, despite this focus, minority students have remained underrepresented in these fields. Some researchers have directed their attention towards improving the STEM pipeline which carries students through…

Different Directions

ERIC Educational Resources Information Center

Bushweller, Kevin

2004-01-01

The genesis of the Prince William choice program was in surveys of high school seniors in the 63,100-student district, the third-largest school system in Virginia. In the mid-1990s, Superintendent Edward L. Kelly became increasingly concerned by responses to a question that asked whether the teenagers felt they could have pushed themselves harder.…

Moving in a Special Direction

ERIC Educational Resources Information Center

Gehring, John

2004-01-01

The national push to address the rising problem of childhood obesity is especially relevant for students with disabilities, because experts say such students are more likely to be obese than their peers without disabilities. Despite the progress that has been made over the years to address the needs of children with disabilities, the vast majority…

Sequential actin-based pushing forces drive meiosis I chromosome migration and symmetry breaking in oocytes.

PubMed

Yi, Kexi; Rubinstein, Boris; Unruh, Jay R; Guo, Fengli; Slaughter, Brian D; Li, Rong

2013-03-04

Polar body extrusion during oocyte maturation is critically dependent on asymmetric positioning of the meiotic spindle, which is established through migration of the meiosis I (MI) spindle/chromosomes from the oocyte interior to a subcortical location. In this study, we show that MI chromosome migration is biphasic and driven by consecutive actin-based pushing forces regulated by two actin nucleators, Fmn2, a formin family protein, and the Arp2/3 complex. Fmn2 was recruited to endoplasmic reticulum structures surrounding the MI spindle, where it nucleated actin filaments to initiate an initially slow and poorly directed motion of the spindle away from the cell center. A fast and highly directed second migration phase was driven by actin-mediated cytoplasmic streaming and occurred as the chromosomes reach a sufficient proximity to the cortex to activate the Arp2/3 complex. We propose that decisive symmetry breaking in mouse oocytes results from Fmn2-mediated perturbation of spindle position and the positive feedback loop between chromosome signal-induced Arp2/3 activation and Arp2/3-orchestrated cytoplasmic streaming that transports the chromosomes.

Sequential actin-based pushing forces drive meiosis I chromosome migration and symmetry breaking in oocytes

PubMed Central

Yi, Kexi; Rubinstein, Boris; Unruh, Jay R.; Guo, Fengli; Slaughter, Brian D.

2013-01-01

Polar body extrusion during oocyte maturation is critically dependent on asymmetric positioning of the meiotic spindle, which is established through migration of the meiosis I (MI) spindle/chromosomes from the oocyte interior to a subcortical location. In this study, we show that MI chromosome migration is biphasic and driven by consecutive actin-based pushing forces regulated by two actin nucleators, Fmn2, a formin family protein, and the Arp2/3 complex. Fmn2 was recruited to endoplasmic reticulum structures surrounding the MI spindle, where it nucleated actin filaments to initiate an initially slow and poorly directed motion of the spindle away from the cell center. A fast and highly directed second migration phase was driven by actin-mediated cytoplasmic streaming and occurred as the chromosomes reach a sufficient proximity to the cortex to activate the Arp2/3 complex. We propose that decisive symmetry breaking in mouse oocytes results from Fmn2-mediated perturbation of spindle position and the positive feedback loop between chromosome signal-induced Arp2/3 activation and Arp2/3-orchestrated cytoplasmic streaming that transports the chromosomes. PMID:23439682

Medical and nonmedical factors influencing utilization of delayed pushing in the second stage.

PubMed

Frey, Heather A; Tuuli, Methodius G; Cortez, Sarah; Odibo, Anthony O; Roehl, Kimberly A; Shanks, Anthony L; Macones, George A; Cahill, Alison G

2013-08-01

To evaluate factors impacting selection to delayed pushing in the second stage of labor. This case-control study was a secondary analysis of a large retrospective cohort study. Cases included women who delayed pushing for 60 minutes or more in the second stage of labor. Controls began pushing prior to 60 minutes from the time of diagnosis of complete dilation. Demographic, labor, and nonmedical factors were compared among cases and controls. Logistic regression modeling was used to identify factors independently associated with delayed pushing. We identified 471 women who delayed pushing and 4819 controls. Nulliparity, maternal body mass index > 25, high fetal station at complete dilation, regional anesthesia use, and start of second stage during staffing shift change were independent factors associated with increased use of delayed pushing. On the other hand, black race and second-stage management during night shift were associated with lower odds of employing delayed pushing. Delayed pushing was more commonly employed in nulliparous women, but 38.9% of multiparous women also delayed pushing. We identified multiple factors associated with use of delayed pushing. This study helps to define current patterns of second-stage labor management. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Medical and Non-Medical Factors Influencing Utilization of Delayed Pushing in the Second Stage

PubMed Central

FREY, Heather A.; TUULI, Methodius G.; CORTEZ, Sarah; ODIBO, Anthony O.; ROEHL, Kimberly A.; SHANKS, Anthony L.; MACONES, George A.; CAHILL, Alison G.

2014-01-01

Objective To evaluate factors impacting selection to delayed pushing in the second stage of labor. Study design This case-control study was a secondary analysis of a large retrospective cohort study. Cases included women who delayed pushing for 60 minutes or more in the second stage of labor. Controls began pushing prior to 60 minutes from the time of diagnosis of complete dilation. Demographic, labor, and nonmedical factors were compared among cases and controls. Logistic regression modelling was used to identify factors independently associated with delayed pushing. Results We identified 471 women who delayed pushing and 4,819 controls. Nulliparity, maternal body mass index > 25, high fetal station at complete dilation, regional anesthesia use, and start of second stage during staffing shift change were independent factors associated with increased use of delayed pushing. On the other hand, black race and second stage management during night shift were associated with lower odds of employing delayed pushing. Delayed pushing was more commonly employed in nulliparous women, but 38.9% of multiparous women also delayed pushing. Conclusion We identified multiple factors associated with use of delayed pushing. This study helps to define current patterns of second stage labor management. PMID:23208765

Procedure Selection and Patient Positioning Influence Spine Kinematics During High-Velocity, Low-Amplitude Spinal Manipulation Applied to the Low Back.

PubMed

Bell, Spencer; D'Angelo, Kevin; Kawchuk, Gregory N; Triano, John J; Howarth, Samuel J

This investigation compared indirect 3-dimensional angular kinematics (position, velocity, and acceleration) of the lumbar spine for 2 different high-velocity, low-amplitude (HVLA) spinal manipulation procedures (lumbar spinous pull or push), and altered initial patient lower limb posture. Twenty-four participants underwent 6 HVLA procedures directed toward the presumed L4 vertebra, reflecting each combination of 2 variants of a spinal manipulation application technique (spinous pull and push) and 3 initial hip flexion angles (0°, 45°, and 90°) applied using a right lateral recumbent patient position. All contact forces and moments between the patient and the external environment, as well as 3-dimensional kinematics of the patient's pelvis and thorax, were recorded. Lumbar spine angular positions, velocities, and accelerations were analyzed within the preload and impulse stages of each HVLA trial. Lumbar spine left axial rotation was greater for the pull HVLA. The pull HVLA also generated a greater maximum (leftward) and lower minimum (rightward) axial rotation velocity and deceleration and greater leftward and rightward lateral bend velocities, acceleration, and deceleration components. Not flexing the hip produced the greatest amount of extension, as well as the lowest axial rotation and maximum axial rotation acceleration during the impulse. This investigation provides basic kinematic information for clinicians to understand the similarities and differences between 2 HVLA side-lying manipulations in the lumbar spine. Use of these findings and novel technology can drive future research initiatives that can both affect clinical decision making and influence teaching environments surrounding spinal manipulative therapy skill acquisition. Copyright © 2017. Published by Elsevier Inc.

Biomechanical variables and perception of comfort in running shoes with different cushioning technologies.

PubMed

Dinato, Roberto C; Ribeiro, Ana P; Butugan, Marco K; Pereira, Ivye L R; Onodera, Andrea N; Sacco, Isabel C N

2015-01-01

To investigate the relationships between the perception of comfort and biomechanical parameters (plantar pressure and ground reaction force) during running with four different types of cushioning technology in running shoes. Randomized repeated measures. Twenty-two men, recreational runners (18-45 years) ran 12km/h with running shoes with four different cushioning systems. Outcome measures included nine items related to perception of comfort and 12 biomechanical measures related to the ground reaction forces and plantar pressures. Repeated measure ANOVAs, Pearson correlation coefficients, and step-wise multiple regression analyses were employed (p≤0.05). No significant correlations were found between the perception of comfort and the biomechanical parameters for the four types of investigated shoes. Regression analysis revealed that 56% of the perceived general comfort can be explained by the variables push-off rate and pressure integral over the forefoot (p=0.015) and that 33% of the perception of comfort over the forefoot can be explained by second peak force and push-off rate (p=0.016). The results did not demonstrate significant relationships between the perception of comfort and the biomechanical parameters for the three types of shoes investigated (Gel, Air, and ethylene-vinyl acetate). Only the shoe with Adiprene+ technology had its general comfort and cushioning perception predicted by the loads over the forefoot. Thus, in general, one cannot predict the perception of comfort of a running shoe through impact and plantar pressure received. Copyright © 2013 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

External Hand Forces Exerted by Long-Term Care Staff to Push Floor-Based Lifts: Effects of Flooring System and Resident Weight.

PubMed

Lachance, Chantelle C; Korall, Alexandra M B; Russell, Colin M; Feldman, Fabio; Robinovitch, Stephen N; Mackey, Dawn C

2016-09-01

The aim of this study was to investigate the effects of flooring type and resident weight on external hand forces required to push floor-based lifts in long-term care (LTC). Novel compliant flooring is designed to reduce fall-related injuries among LTC residents but may increase forces required for staff to perform pushing tasks. A motorized lift may offset the effect of flooring on push forces. Fourteen female LTC staff performed straight-line pushes with two floor-based lifts (conventional, motor driven) loaded with passengers of average and 90th-percentile resident weights over four flooring systems (concrete+vinyl, compliant+vinyl, concrete+carpet, compliant+carpet). Initial and sustained push forces were measured by a handlebar-mounted triaxial load cell and compared to participant-specific tolerance limits. Participants rated pushing difficulty. Novel compliant flooring increased initial and sustained push forces and subjective ratings compared to concrete flooring. Compared to the conventional lift, the motor-driven lift substantially reduced initial and sustained push forces and perceived difficulty of pushing for all four floors and both resident weights. Participants exerted forces above published tolerance limits only when using the conventional lift on the carpet conditions (concrete+carpet, compliant+carpet). With the motor-driven lift only, resident weight did not affect push forces. Novel compliant flooring increased linear push forces generated by LTC staff using floor-based lifts, but forces did not exceed tolerance limits when pushing over compliant+vinyl. The motor-driven lift substantially reduced push forces compared to the conventional lift. Results may help to address risk of work-related musculoskeletal injury, especially in locations with novel compliant flooring. © 2016, Human Factors and Ergonomics Society.

Massively Multithreaded Maxflow for Image Segmentation on the Cray XMT-2

PubMed Central

Bokhari, Shahid H.; Çatalyürek, Ümit V.; Gurcan, Metin N.

2014-01-01

SUMMARY Image segmentation is a very important step in the computerized analysis of digital images. The maxflow mincut approach has been successfully used to obtain minimum energy segmentations of images in many fields. Classical algorithms for maxflow in networks do not directly lend themselves to efficient parallel implementations on contemporary parallel processors. We present the results of an implementation of Goldberg-Tarjan preflow-push algorithm on the Cray XMT-2 massively multithreaded supercomputer. This machine has hardware support for 128 threads in each physical processor, a uniformly accessible shared memory of up to 4 TB and hardware synchronization for each 64 bit word. It is thus well-suited to the parallelization of graph theoretic algorithms, such as preflow-push. We describe the implementation of the preflow-push code on the XMT-2 and present the results of timing experiments on a series of synthetically generated as well as real images. Our results indicate very good performance on large images and pave the way for practical applications of this machine architecture for image analysis in a production setting. The largest images we have run are 320002 pixels in size, which are well beyond the largest previously reported in the literature. PMID:25598745

33 CFR 83.24 - Towing and pushing (Rule 24).

Code of Federal Regulations, 2010 CFR

2010-07-01

... it can best be seen. (b) Pushing vessel and pushed vessel rigidly connected in composite unit. When a pushing vessel and a vessel being pushed ahead are rigidly connected in a composite unit they shall be...). (e) Vessels being towed. A vessel or object other than those referred to in paragraph (g) of this...

33 CFR 83.35 - Sound signals in restricted visibility (Rule 35).

Code of Federal Regulations, 2010 CFR

2010-07-01

... engaged in fishing; vessels engaged in towing or pushing. A vessel not under command; a vessel restricted... fishing, whether underway or at anchor; and a vessel engaged in towing or pushing another vessel shall... made by the towing vessel. (e) Pushing and pushed vessels connected in composite unit. When a pushing...

Towards electrochromic devices having visible color switching using electronic push-push and push-pull cinnamaldehyde derivatives.

PubMed

Navarathne, Daminda; Skene, W G

2013-12-11

A series of symmetric and unsymmetric conjugated azomethines derived from cinnamaldehyde and 2,5-diaminothiophene-3,4-dicarboxylic acid diethyl ester were prepared. The optical, electrochemical, and spectroelectrochemical properties of the electronic push-pull and push-push triads were investigated. Their properties could be tuned contingent on the cinnamaldehyde's electron withdrawing and donating substituents. The push-push symmetric derivative exhibited positive solvatochromism with the absorbance spanning some 31 nm, depending on the solvent polarity. Solvent dependent spectroelectrochemistry was also found for the symmetric push-push azomethine. The color of the neutral state and radical cation spanned 215 nm. The most pronounced color transition of the purple colored material was found in dimethyl sulfoxide (DMSO), where the color bleached with electrochemical oxidation. This was a result of the absorbance shifting into the near infrared (NIR) and not from decomposition of the azomethine. Electrochromic devices with the azomethines possessing desired reversible oxidation and color changes in the visible were fabricated and tested to demonstrate the applicability of these azomethine triads in devices.

Optical force rectifiers based on PT-symmetric metasurfaces

NASA Astrophysics Data System (ADS)

Alaee, Rasoul; Gurlek, Burak; Christensen, Johan; Kadic, Muamer

2018-05-01

We introduce here the concept of optical force rectifier based on parity-time symmetric metasurfaces. Directly linked to the properties of non-Hermitian systems engineered by balanced loss and gain constituents, we show that light can exert asymmetric pulling or pushing forces on metasurfaces depending on the direction of the impinging light. This generates a complete force rectification in the vicinity of the exceptional point. Our findings have the potential to spark the design of applications in optical manipulation where the forces, strictly speaking, act unidirectionally.

Delayed versus immediate pushing in second stage of labor.

PubMed

Kelly, Mary; Johnson, Eileen; Lee, Vickie; Massey, Liz; Purser, Debbie; Ring, Karen; Sanderson, Stephanye; Styles, Juanita; Wood, Deb

2010-01-01

Comparison of two different methods for management of second stage of labor: immediate pushing at complete cervical dilation of 10 cm and delayed pushing 90 minutes after complete cervical dilation. This study was a randomized clinical trial in a labor and delivery unit of a not-for-profit community hospital. A sample of 44 nulliparous mothers with continuous epidural anesthesia were studied after random assignment to treatment groups. Subjects were managed with either immediate or delayed pushing during the second stage of labor at the time cervical dilation was complete. The primary outcome measure was the length of pushing during second stage of labor. Secondary outcomes included length of second stage of labor, maternal fatigue and perineal injuries, and fetal heart rate decelerations. Two-tailed, unpaired Student's t-tests and Chi-square analysis were used for data analysis. Level of significance was set at p < .01 following a Bonferroni correction for multiple t-tests. A total of 44 subjects received the study intervention (N = 28 immediate pushing; N = 16 delayed pushing). The delayed pushing group had significantly shorter amount of time spent in pushing compared with the immediate pushing group (38.9 +/- 6.9 vs. 78.7 +/- 7.9 minutes, respectively, p = .002). Maternal fatigue scores, perineal injuries, and fetal heart rate decelerations were similar for both groups. Delaying pushing for up to 90 minutes after complete cervical dilation resulted in a significant decrease in the time mothers spent pushing without a significant increase in total time in second stage of labor.In clinical practice, healthcare providers sometimes resist delaying the onset of pushing after second stage of labor has begun because of a belief it will increase labor time. This study's finding of a 51% reduction in pushing time when mothers delay pushing for up to 90 minutes, with no significant increase in overall time for second stage of labor, disputes that concern.

Leveraging Current Initiatives to Bring Earth and Space Science into Elementary and Early Childhood Classrooms: NGSS in the Context of the Classroom Technology Push

NASA Astrophysics Data System (ADS)

Pacheco-Guffrey, H. A.

2016-12-01

Classroom teachers face many challenges today such as new standards, the moving targets of high stakes tests and teacher evaluations, inconsistent/insufficient access to resources and evolving education policies. Science education in the K-5 context is even more complex. NGSS can be intimidating, especially to K-5 educators with little science background. High stakes science tests are slow to catch up with newly drafted state level science standards, leaving teachers unsure about what to change and when to implement updated standards. Amid all this change, many schools are also piloting new technology programs. Though exciting, tech initiatives can also be overwhelming to teachers who are already overburdened. A practical way to support teachers in science while remaining mindful of these stressors is to design and share resources that leverage other K-5 school initiatives. This is often done by integrating writing or math into science learning to meet Common Core requirements. This presentation will suggest a method for bringing Earth and space science learning into elementary / early childhood classrooms by utilizing the current push for tablet technology. The goal is to make science integration reasonable by linking it to technology programs that are in their early stages. The roles and uses of K-5 Earth and space science apps will be examined in this presentation. These apps will be linked to NGSS standards as well as to the science and engineering practices. To complement the app resources, two support frameworks will also be shared. They are designed to help educators consider new technologies in the context of their own classrooms and lessons. The SAMR Model (Puentadura, 2012) is a conceptual framework that helps teachers think critically about the means and purposes of integrating technology into existing lessons. A practical framework created by the author will also be shared. It is designed to help teachers identify and address the important logistical and curricular decision-making aspects of integrating technology into K-5 classroom science. This method provides clear applications for new technology while also bringing meaningful Earth and space science learning into K-5 classrooms.

Access to Care for Transgender Veterans in the Veterans Health Administration: 2006–2013

PubMed Central

Shipherd, Jillian C.; Lindsay, Jan; Blosnich, John R.; Brown, George R.; Jones, Kenneth T.

2014-01-01

A 2011 Veterans Health Administration directive mandated medically necessary care for transgender veterans. Internal education efforts informed staff of the directive and promoted greater access to care. For fiscal years 2006 through 2013, we identified 2662 unique individuals with International Classification of Diseases, Ninth Revision diagnoses related to transgender status in Veterans Health Administration medical records, with 40% of new cases in the 2 years following the directive. A bottom-up push for services by veterans and top-down education likely worked synergistically to speed implementation of the new policy and increase access to care. PMID:25100417

Access to care for transgender veterans in the Veterans Health Administration: 2006-2013.

PubMed

Kauth, Michael R; Shipherd, Jillian C; Lindsay, Jan; Blosnich, John R; Brown, George R; Jones, Kenneth T

2014-09-01

A 2011 Veterans Health Administration directive mandated medically necessary care for transgender veterans. Internal education efforts informed staff of the directive and promoted greater access to care. For fiscal years 2006 through 2013, we identified 2662 unique individuals with International Classification of Diseases, Ninth Revision diagnoses related to transgender status in Veterans Health Administration medical records, with 40% of new cases in the 2 years following the directive. A bottom-up push for services by veterans and top-down education likely worked synergistically to speed implementation of the new policy and increase access to care.

33 CFR 164.76 - Towline and terminal gear for towing alongside and pushing ahead.

Code of Federal Regulations, 2010 CFR

2010-07-01

... towing alongside and pushing ahead. 164.76 Section 164.76 Navigation and Navigable Waters COAST GUARD... Towline and terminal gear for towing alongside and pushing ahead. The owner, master, or operator of each vessel towing alongside or pushing ahead shall ensure that the face wires, spring lines, and push gear...

A Magnetron Sputter Deposition System for the Development of Multilayer X-Ray Optics

NASA Technical Reports Server (NTRS)

Broadway, David; Ramsey, Brian; Gubarev, Mikhail

2014-01-01

The proposal objective is to establish the capability to deposit multilayer structures for x-ray, neutron, and EUV optic applications through the development of a magnetron sputtering deposition system. A specific goal of this endeavor is to combine multilayer deposition technology with the replication process in order to enhance the MSFC's position as a world leader in the design of innovative X-ray instrumentation through the development of full shell replicated multilayer optics. The development of multilayer structures is absolutely necessary in order to advance the field of X-ray astronomy by pushing the limit for observing the universe to ever increasing photon energies (i. e. up to 200 keV or higher); well beyond Chandra (approx. 10 keV) and NuStar's (approx. 75 keV) capability. The addition of multilayer technology would significantly enhance the X-ray optics capability at MSFC and allow NASA to maintain its world leadership position in the development, fabrication and design of innovative X-ray instrumentation which would be the first of its kind by combining multilayer technology with the mirror replication process. This marriage of these technologies would allow astronomers to see the universe in a new light by pushing to higher energies that are out of reach with today's instruments.To this aim, a magnetron vacum sputter deposition system for the deposition of novel multilayer thin film X-ray optics is proposed. A significant secondary use of the vacuum deposition system includes the capability to fabricate multilayers for applications in the field of EUV optics for solar physics, neutron optics, and X-ray optics for a broad range of applications including medical imaging.

A Magnetron Sputter Deposition System for the Development of X-Ray Multilayer Optics

NASA Technical Reports Server (NTRS)

Broadway, David

2015-01-01

The project objective is to establish the capability to deposit multilayer structures for x-ray, neutron, and extreme ultraviolet (EUV) optic applications through the development of a magnetron sputtering deposition system. A specific goal of this endeavor is to combine multilayer deposition technology with the replication process in order to enhance NASA Marshall Space Flight Center's (MSFC's) position as a world leader in the design of innovative x-ray instrumentation through the development of full shell replicated multilayer optics. The development of multilayer structures are absolutely necessary in order to advance the field of x-ray astronomy by pushing the limit for observing the universe to ever-increasing photon energies (i.e., up to 200 keV or higher), well beyond Chandra's (approx.10 keV) and NuStar's (approx.75 keV) capability. The addition of multilayer technology would significantly enhance the x-ray optics capability at MSFC and allow NASA to maintain its world leadership position in the development, fabrication, and design of innovative x-ray instrumentation, which would be the first of its kind by combining multilayer technology with the mirror replication process. This marriage of these technologies would allow astronomers to see the universe in a new light by pushing to higher energies that are out of reach with today's instruments. To this aim, a magnetron vacuum sputter deposition system for the deposition of novel multilayer thin film x-ray optics is proposed. A significant secondary use of the vacuum deposition system includes the capability to fabricate multilayers for applications in the field of EUV optics for solar physics, neutron optics, and x-ray optics for a broad range of applications including medical imaging.

Push pull microfluidics on a multi-level 3D CD.

PubMed

Thio, Tzer Hwai Gilbert; Ibrahim, Fatimah; Al-Faqheri, Wisam; Moebius, Jacob; Khalid, Noor Sakinah; Soin, Norhayati; Kahar, Maria Kahar Bador Abdul; Madou, Marc

2013-08-21

A technique known as thermo-pneumatic (TP) pumping is used to pump fluids on a microfluidic compact disc (CD) back towards the CD center against the centrifugal force that pushes liquids from the center to the perimeter of the disc. Trapped air expands in a TP air chamber during heating, and this creates positive pressure on liquids located in chambers connected to that chamber. While the TP air chamber and connecting channels are easy to fabricate in a one-level CD manufacturing technique, this approach provides only one way pumping between two chambers, is real-estate hungry and leads to unnecessary heating of liquids in close proximity to the TP chamber. In this paper, we present a novel TP push and pull pumping method which allows for pumping of liquid in any direction between two connected liquid chambers. To ensure that implementation of TP push and pull pumping also addresses the issue of space and heating challenges, a multi-level 3D CD design is developed, and localized forced convection heating, rather than infra-red (IR) is applied. On a multi-level 3D CD, the TP features are placed on a top level separate from the rest of the microfluidic processes that are implemented on a lower separate level. This approach allows for heat shielding of the microfluidic process level, and efficient usage of space on the CD for centrifugal handling of liquids. The use of localized forced convection heating, rather than infra-red (IR) or laser heating in earlier implementations allows not only for TP pumping of liquids while the CD is spinning but also makes heat insulation for TP pumping and other fluidic functions easier. To aid in future implementations of TP push and pull pumping on a multi-level 3D CD, study on CD surface heating is also presented. In this contribution, we also demonstrate an advanced application of pull pumping through the implementation of valve-less switch pumping.

Push pull microfluidics on a multi-level 3D CD

PubMed Central

Thio, Tzer Hwai Gilbert; Ibrahim, Fatimah; Al-Faqheri, Wisam; Moebius, Jacob; Khalid, Noor Sakinah; Soin, Norhayati; Kahar, Maria Kahar Bador Abdul; Madou, Marc

2013-01-01

A technique known as thermo-pneumatic (TP) pumping is used to pump fluids on a microfluidic compact disc (CD) back towards the CD center against the centrifugal force that pushes liquids from the center to the perimeter of the disc. Trapped air expands in a TP air chamber during heating, and this creates positive pressure on liquids located in chambers connected to that chamber. While the TP air chamber and connecting channels are easy to fabricate in a one-level CD manufacturing technique, this approach provides only one way pumping between two chambers, is real-estate hungry and leads to unnecessary heating of liquids in close proximity to the TP chamber. In this paper, we present a novel TP push and pull pumping method which allows for pumping of liquid in any direction between two connected liquid chambers. To ensure that implementation of TP push and pull pumping also addresses the issue of space and heating challenges, a multi-level 3D CD design is developed, and localized forced convection heating, rather than infra-red (IR) is applied. On a multi-level 3D CD, the TP features are placed on a top level separate from the rest of the microfluidic processes that are implemented on a lower separate level. This approach allows for heat shielding of the microfluidic process levels, and efficient usage of space on the CD for centrifugal handling of liquids. The use of localized forced convection heating, rather than infra-red (IR) or laser heating in earlier implementations allows not only for TP pumping of liquids while the CD is spinning but also makes heat insulation for TP pumping and other fluidic functions easier. To aid in future implementations of TP push and pull pumping on a multi-level 3D CD, study on CD surface heating is also presented. In this contribution, we also demonstrate an advanced application of pull pumping through the implementation of valve-less switch pumping. PMID:23774994

Energy-Saving Optimization of Water Supply Pumping Station Life Cycle Based on BIM Technology

NASA Astrophysics Data System (ADS)

Qun, Miao; Wang, Jiayuan; Liu, Chao

2017-12-01

In the urban water supply system, pump station is the main unit of energy consumption. In the background of pushing forward the informatization in China, using BIM technology in design, construction and operations of water supply pumping station, can break through the limitations of the traditional model and effectively achieve the goal of energy conservation and emissions reduction. This work researches the way to solve energy-saving optimization problems in the process of whole life cycle of water supply pumping station based on BIM technology, and put forward the feasible strategies of BIM application in order to realize the healthy and sustainable development goals by establishing the BIM model of water supply pumping station of Qingdao Guzhenkou water supply project.

Physics Leads to Free Elections in the Nuclear Age.

NASA Astrophysics Data System (ADS)

Synek, Miroslav

2001-10-01

------------- Complex historical development on our planet, utilizing the knowledge of physics, has reached a powerful technology of nuclear intercontinental missiles, conceivably controllable through a computerized "push-button". Whenever this technology falls under the control of an irresponsible, miscalculating, or, insane dictator, with sufficiently powerful means of a huge, mass-produced, nuclear-missile built-up, anywhere on our planet, the very survival of all humanity on our planet could be threatened. Therefore, it is a historical urgency that this technology be under the control by a government of the people, by the people and for the people, based on a sufficiently reliable system of free elections, in any country on our planet, wherever and whenever a total nuclear holocaust could originate.

Health economics and outcomes research within drug development: challenges and opportunities for reimbursement and market access within biopharma research.

PubMed

van Nooten, Floortje; Holmstrom, Stefan; Green, Julia; Wiklund, Ingela; Odeyemi, Isaac A O; Wilcox, Teresa K

2012-06-01

Healthcare decision makers who determine funding for new medical technologies depend on manufacturers to provide evidence of the technology's efficacy, safety and cost-effectiveness. Constrained budgets and increasing reliance on formal health technology assessment (HTA) have created an abundance of external hurdles that manufacturers must navigate to ensure successful product commercialization. These demands have pushed pharmaceutical companies to adjust their internal structures to coordinate generation of appropriate evidence. In this article we summarize internal and external opportunities for manufacturers to establish a foundation of evidence for successful market access, starting in Phase I of development and continuing throughout the post-approval product lifecycle. Copyright © 2012 Elsevier Ltd. All rights reserved.

The Study on Neuro-IE Management Software in Manufacturing Enterprises. -The Application of Video Analysis Technology

NASA Astrophysics Data System (ADS)

Bian, Jun; Fu, Huijian; Shang, Qian; Zhou, Xiangyang; Ma, Qingguo

This paper analyzes the outstanding problems in current industrial production by reviewing the three stages of the Industrial Engineering Development. Based on investigations and interviews in enterprises, we propose the new idea of applying "computer video analysis technology" to new industrial engineering management software, and add "loose-coefficient" of the working station to this software in order to arrange scientific and humanistic production. Meanwhile, we suggest utilizing Biofeedback Technology to promote further research on "the rules of workers' physiological, psychological and emotional changes in production". This new kind of combination will push forward industrial engineering theories and benefit enterprises in progressing towards flexible social production, thus it will be of great theory innovation value, social significance and application value.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rotman, D.

Exxon chemical says it has made linear low-density polyethylene (LLDPE) using metallocene catalysts at its world-scale gas-phase plant in Mont Belvieu, TX. Exxon also says it has received a broad US patent that covers the use of metallocenes in gas-phase reactors that use condensing mode technology and that it plans to license the know-how. The moves, say industry experts, greatly strengthen Exxon`s position in metallocenes, particularly in pushing metallocene-based PE into commodity markets. The use of gas-phase technology {open_quotes}had to happen{close_quotes} to allow metallocene polymers to compete as commodities, says David Highfield, v.p. at Catalyst Consultants (Spring House, PA). {open_quotes}It`smore » very important and very significant in widening the scope of [metallocene] technology.{close_quotes}« less

Finite Element Analysis of MEMS Devices

NASA Technical Reports Server (NTRS)

Corrigan, Jennifer

2004-01-01

A side-slide actuator and a corrugated diaphragm actuator will be analyzed and optimized this summer. Coupled electrostatic and fluid analyses will also be initiated. Both the side-slide actuator and the corrugated diaphragm actuator will be used to regulate the flow of fuel in a jet engine. Many of the side-slide actuators will be placed on top of a fuel injector that is still in the developmental stage as well. The corrugated diaphragm actuator will also be used to regulate the flow of fuel in fuel injectors. A comparative analysis of the performance matrix of both actuators will be conducted. The side-slide actuator uses the concept of mechanical advantage to regulate the flow of fuel using electrostatic forces. It is made from Nickel, Silicon Carbide, and thin layers of Oxide. The slider will have a hole in the middle that will allow fuel to pass through the hole underneath it. The goal is to regulate the flow of fuel through the inlet. This means that the actuator needs to be designed so that when a voltage is applied to the push rod, the slider will deflect in the x-direction and be able to completely block the inlet and no fuel can pass through. Different voltage levels will be tested. The parameters that are being optimized are the thickness of the diaphragm, what kind of corrugation the diaphragm should have, the length, width, and thickness of the push rod, and what design should be used to return the slider. The current possibilities for a return rod are a built in spring on the slider, a return rod that acts like a spring, or a return rod that is identical to the push rod. The final actuator design should have a push rod that has rotational motion and no translation motion, a push rod thickness that prevents warping due to the slider, and a large ratio of the displacement on the bottom of the push rod to displacement on the top of the push rod. The corrugated diaphragm actuator was optimized last winter and this summer will be spent completing the optimization of the coupled electrostatic and fluid flow parameters. It was found that Nickel is the best material to use for the diaphragm because it has a higher yield strength and allows for a larger stress, deflection and applied pressure. The parameters that were optimized were the wavelength and thickness of the diaphragm.

Cyclic biomechanical testing of biocomposite lateral row knotless anchors in a human cadaveric model.

PubMed

Barber, F Alan; Bava, Eric D; Spenciner, David B; Piccirillo, Justin

2013-06-01

The purpose of this study was to assess the mechanical performance of biocomposite knotless lateral row anchors based on both anchor design and the direction of pull. Two lateral row greater tuberosity insertion sites (anterior and posterior) were identified in matched pairs of fresh-frozen human cadaveric shoulders DEXA (dual energy X-ray absorptiometry) scanned to verify comparability. The humeri were stripped of all soft tissue and 3 different biocomposite knotless lateral row anchors: HEALIX Knotless BR (DePuy Mitek, Raynham MA), BioComposite PushLock (Arthrex, Naples, FL), and Bio-SwiveLock (Arthrex). Fifty-two anchors were distributed among the insertion locations and tested them with either an anatomic or axial pull. A fixed-gauge loop (15 mm) of 2 high-strength sutures from each anchor was created. After a 10-Nm preload, anchors were cycled from 10 to 45 Nm at 0.5 Hz for 200 cycles and tested to failure at 4.23 mm/second. The load to reach 3 mm and 5 mm displacement, ultimate failure load, displacement at ultimate failure, and failure mode were recorded. Threaded anchors (Bio-SwiveLock, P = .03; HEALIX Knotless, P = .014) showed less displacement with anatomic testing than did the nonthreaded anchor (BioComposite PushLock), and the HEALIX Knotless showed less overall displacement than did the other 2 anchors. The Bio-SwiveLock exhibited greater failure loads than did the other 2 anchors (P < .05). Comparison of axial and anatomic loading showed no maximum load differences for all anchors as a whole (P = .1084). Yet, anatomic pulling produced higher failure loads than did axial pulling for the Bio-SwiveLock but not for the BioComposite PushLock or the HEALIX Knotless. The nonthreaded anchor (BioComposite PushLock) displayed lower failure loads than did both threaded anchors with axial pulling. Threaded biocomposite anchors (HEALIX Knotless BR and Bio-SwiveLock) show less anatomic loading displacement and higher axial failure loads than do the nonthreaded (BioComposite PushLock) anchor. The HEALIX Knotless BR anchor showed less displacement than did the BioComposite PushLock and Bio-SwiveLock anchors. Neither axial nor anatomic loading had an effect on overall anchor displacement. Because of the strength profiles exhibited, this study supports the use of biocomposite anchors, which have definite advantages over polyetheretherketone (PEEK) and metal products. However, the nonthreaded BioComposite PushLock anchor cannot be recommended. Copyright © 2013 Arthroscopy Association of North America. All rights reserved.

Non Destructive Seal Testing Polymeric Tray

DTIC Science & Technology

2006-10-01

School of Enviromental and Biological Science Rutgers, The State University of New Jersey New Brunswick, New Jersey 08903 Principal Investigator...plate to accept new tray • Insert tray • Push “Continue” button • Lower upper compression plate and hold in position (80 psig) • Raise bottom...John J. Kingman Rd. Fort Belvoir, VA 22060-6221 Contractor: Rutgers, The State University of New Jersey THE CENTER FOR ADVANCED FOOD TECHNOLOGY

Research on cloud-based remote measurement and analysis system

NASA Astrophysics Data System (ADS)

Gao, Zhiqiang; He, Lingsong; Su, Wei; Wang, Can; Zhang, Changfan

2015-02-01

The promising potential of cloud computing and its convergence with technologies such as cloud storage, cloud push, mobile computing allows for creation and delivery of newer type of cloud service. Combined with the thought of cloud computing, this paper presents a cloud-based remote measurement and analysis system. This system mainly consists of three parts: signal acquisition client, web server deployed on the cloud service, and remote client. This system is a special website developed using asp.net and Flex RIA technology, which solves the selective contradiction between two monitoring modes, B/S and C/S. This platform supplies customer condition monitoring and data analysis service by Internet, which was deployed on the cloud server. Signal acquisition device is responsible for data (sensor data, audio, video, etc.) collection and pushes the monitoring data to the cloud storage database regularly. Data acquisition equipment in this system is only conditioned with the function of data collection and network function such as smartphone and smart sensor. This system's scale can adjust dynamically according to the amount of applications and users, so it won't cause waste of resources. As a representative case study, we developed a prototype system based on Ali cloud service using the rotor test rig as the research object. Experimental results demonstrate that the proposed system architecture is feasible.

Effectiveness and feasibility of assistant push on improvement of chest compression quality: a crossover study.

PubMed

Choi, Sung Soo; Yun, Seong-Woo; Lee, Byung Kook; Jeung, Kyung Woon; Song, Kyoung Hwan; Lee, Chang-Hee; Park, Jung Soo; Jeong, Ji Yeon; Shin, Sang Yeol

2015-03-01

To improve the quality of chest compression (CC), we developed the assistant-push method, whereby the second rescuer pushes the back of the chest compressor during CC. We investigated the effectiveness and feasibility of assistant push in achieving and maintaining the CC quality. This was a randomized crossover trial in which 41 subjects randomly performed both of standard CC (single-rescuer group) and CC with instructor-driven assistant push (assistant-push group) in different order. Each session of CC was performed for 2 minutes using a manikin. Subjects were also assigned to both roles of chest compressor and assistant and together performed CC with subject-driven assistant push. Depth of CC, compression to recoil ratio, duty cycle, and rate of incomplete recoil were quantified. The mean depth of CC (57.0 [56.0-59.0] vs 55.0 [49.5-57.5], P < .001) was significantly deeper, and the compression force (33.8 [29.3-36.4] vs 23.3 [20.4-25.3], P < .001) was stronger in the assistant-push group. The ratio of compression to recoil, duty cycle, and rate of incomplete chest recoil were comparable between the 2 groups. The CC depth in the single-rescuer group decreased significantly every 30 seconds, whereas in the assistant-push group, it was comparable at 60- and 90-second time points (P = .004). The subject assistant-push group performed CCs at a depth comparable with that of the instructor assistant-push group. The assistant-push method improved the depth of CC and attenuated its decline, eventually helping maintain adequate CC depth over time. Subjects were able to feasibly learn assistant push and performed effectively. Copyright © 2014 Elsevier Inc. All rights reserved.

77 FR 66409 - Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-05

... of an unsuitable self-locking nut on the bell crank of the elevator push rod that can cause failure... in the tail section of the fuselage, as a result of installation of a non-suitable self-locking nut... identified that its current configuration has a failure potential when components such as thin self-securing...

Waiting for Superman: Neoliberal Educational Reform and the Craft of Filmic Direction

ERIC Educational Resources Information Center

Prado, Jose; Montez de Oca, Jeffrey

2014-01-01

The Waiting for Superman (WFS) cultural project and its push to transform the public school system has had great appeal among those sympathetic and unsympathetic to the victims of exclusionary and exploitative school agendas. To address the workings of hegemony in the WFS cultural project the authors examine three general scenes in the WFS trailer…

LJ Q&A "ALA Candidates": Library Advocacy x 2

ERIC Educational Resources Information Center

Berry, John N., III

2008-01-01

Library advocacy in one of two directions is the top priority of both Camila Alire and J. Linda Williams, the candidates campaigning to capture the 2009-10 term as president of the American Library Association (ALA). Alire, dean emeritus of the libraries of both the University of New Mexico and Colorado State University, will push for enhancements…

Evaluation Policy in Education: The Effects of International Standards and Performativity on Brazil's Postgraduate Programmes of Excellence

ERIC Educational Resources Information Center

Hostins, Regina Célia Linhares

2015-01-01

The educational reforms that began in the 1990s have changed Brazilian universities' direction from welfare state institutions to market organisations. In postgraduate education, strategic alliances with international agencies, governments and corporations have become closer. At the same time, there has been a push for internationalisation of…

The physiological and biomechanical effects of forwards and reverse sports wheelchair propulsion.

PubMed

Mason, Barry S; Lenton, John P; Goosey-Tolfrey, Victoria L

2015-07-01

To explore the physiological and biomechanical differences between forwards (FOR) and reverse (REV) sports wheelchair propulsion. Fourteen able-bodied males with previous wheelchair propulsion experience pushed a sports wheelchair on a single-roller ergometer in a FOR and REV direction at three sub-maximal speeds (4, 6, and 8 km/hour). Each trial lasted 3 minutes, and during the final minute physiological and biomechanical measures was collected. The physiological results revealed that oxygen uptake (1.51 ± 0.29 vs. 1.38 ± 0.26 L/minute, P = 0.005) and heart rate (121 ± 19 vs. 109 ± 14 beats/minute, P < 0.0005) were significantly greater during REV than FOR only during the 8 km/hour trials. From a biomechanical perspective, push frequencies were similar between FOR and REV across all speeds (P > 0.05). However, greater mean resultant forces were applied during FOR (P < 0.0005) at 4 km/hour (66.7 ± 19.5 vs. 49.2 ± 10.3 N), 6 km/hour (90.7 ± 21.9 vs. 65.3 ± 18.6 N), and 8 km/hour (102.5 ± 17.6 vs. 68.7 ± 13.5 N) compared to REV. Alternatively, push times and push angles were significantly lower (P ≤ 0.001) during FOR at each speed. The current study demonstrated that at higher speeds physiological demand becomes elevated during REV. This was likely to be associated with an inability to apply sufficient force to the wheels, thus requiring kinematic adaptations in order to maintain constant speeds in REV.

Efficacy of different irrigation regimes on the push-out bond strength of various resin-based sealers at different root levels: An in vitro study

PubMed Central

Verma, Diksha; Taneja, Sonali; Kumari, Manju

2018-01-01

Aim: This study aims to evaluate and compare the efficacy of various irrigation regimens on push-out bond strength of AH Plus/gutta-percha, Real Seal/Resilon, and MetaSeal/gutta-percha at three different root levels. Materials and Methods: Single-rooted mandibular premolars (n = 120) were prepared and divided into four groups (n = 30) based on irrigation regimen used: I: 5.25% sodium hypochlorite (NaOCl)-17% ethylenediaminetetraacetic acid (EDTA); II: 5.25% NaOCl-2.25% Peracetic acid (PAA); III: 5.25% NaOCl-18% 1-hydroxyethylidene-1, 1-bisphosphonate (HEBP) (Etidronic Acid); and IV: Distilled Water. Each group was further divided into three subgroups (n = 10); A: AH Plus/gutta-percha; B: MetaSEAL/gutta-percha; C: RealSeal/Resilon. After obturation, roots were sectioned at 3 levels and push-out tests were performed. One-way ANOVA with post hoc Tukey-honestly significant difference tests were applied to assess the significance among various groups. Results: Among irrigants, 2.25% PAA showed significantly lower values when compared with rest of the irrigants. There was no significant difference found among EDTA and HEBP. The push-out bond strength of AH Plus was significantly higher among all sealers. The bond strength values were significantly decreased in apico-coronal direction. Conclusions: There was superior efficacy of EDTA and HEBP on the bond strength of AH Plus at apical root level when compared with other irrigants and sealers at various root levels. PMID:29674811

Final report. Technology innovation for global change: The role of assessment, R and D, and regulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, William C.; Holdren, John P.; Norberg-Bohm, Vicki

2001-11-29

Through the research carried out under this grant, we have made considerable progress in addressing our fundamental research question: How and under what conditions can government stimulate radical technological innovation? More specifically, we have analyzed three pathways through which government may influence the decisions by firms to invest in radical technological innovation: technological opportunism (supply-push policies), regulatory responsiveness (demand-pull policies) and anticipatory action (assessments and information policy). We have produced several written documents, as well as made several presentations of our work. We are now working on a book based on this research, which we will have to a publishermore » in 2002. We are also pursuing other opportunities for dissemination of the results, including both presentations and articles in the academic and policy press.« less

A feasibility study: Forest Fire Advanced System Technology (FFAST)

NASA Technical Reports Server (NTRS)

Mcleod, R. G.; Martin, T. Z.; Warren, J.

1983-01-01

The National Aeronautics and Space Administration/Jet Propulsion Laboratory and the United States Department of Agriculture Forest Service completed a feasibility study that examined the potential uses of advanced technology in forest fires mapping and detection. The current and future (1990's) information needs in forest fire management were determined through interviews. Analysis shows that integrated information gathering and processing is needed. The emerging technologies that were surveyed and identified as possible candidates for use in an end to end system include ""push broom'' sensor arrays, automatic georeferencing, satellite communication links, near real or real time image processing, and data integration. Matching the user requirements and the technologies yielded a ""strawman'' system configuration. The feasibility study recommends and outlines the implementation of the next phase for this project, a two year, conceptual design phase to define a system that warrants continued development.

CO2 Push-Pull Dual (Conjugate) Faults Injection Simulations

DOE Data Explorer

Oldenburg, Curtis (ORCID:0000000201326016); Lee, Kyung Jae; Doughty, Christine; Jung, Yoojin; Borgia, Andrea; Pan, Lehua; Zhang, Rui; Daley, Thomas M.; Altundas, Bilgin; Chugunov, Nikita

2017-07-20

This submission contains datasets and a final manuscript associated with a project simulating carbon dioxide push-pull into a conjugate fault system modeled after Dixie Valley- sensitivity analysis of significant parameters and uncertainty prediction by data-worth analysis. Datasets include: (1) Forward simulation runs of standard cases (push & pull phases), (2) Local sensitivity analyses (push & pull phases), and (3) Data-worth analysis (push & pull phases).

Global Models of Ridge-Push Force, Geoid, and Lithospheric Strength of Oceanic plates

NASA Astrophysics Data System (ADS)

Mahatsente, Rezene

2017-12-01

An understanding of the transmission of ridge-push related stresses in the interior of oceanic plates is important because ridge-push force is one of the principal forces driving plate motion. Here, I assess the transmission of ridge-push related stresses in oceanic plates by comparing the magnitude of the ridge-push force to the integrated strength of oceanic plates. The strength is determined based on plate cooling and rheological models. The strength analysis includes low-temperature plasticity (LTP) in the upper mantle and assumes a range of possible tectonic conditions and rheology in the plates. The ridge-push force has been derived from the thermal state of oceanic lithosphere, seafloor depth and crustal age data. The results of modeling show that the transmission of ridge-push related stresses in oceanic plates mainly depends on rheology and predominant tectonic conditions. If a lithosphere has dry rheology, the estimated strength is higher than the ridge-push force at all ages for compressional tectonics and at old ages (>75 Ma) for extension. Therefore, under such conditions, oceanic plates may not respond to ridge-push force by intraplate deformation. Instead, the plates may transmit the ridge-push related stress in their interior. For a wet rheology, however, the strength of young lithosphere (<75 Ma) is much less than the ridge-push force for both compressional and extensional tectonics. In this case, the ridge-push related stress may dissipate in the interior of oceanic plates and diffuses by intraplate deformation. The state of stress within a plate depends on the balance of far-field and intraplate forces.

Langmuir circulation inhibits near-surface water turbulence

NASA Astrophysics Data System (ADS)

Schultz, Colin

2012-07-01

In the surface ocean, breaking waves are a major source of air bubbles and turbulent kinetic energy. During the presence of a consistent surface wind, these wave-generated bubbles, along with other surface material like seaweed or foam, can be drawn into long rows along the surface. Driving this organization is Langmuir circulation, a phenomenon in which the wind and waves cause surface waters to rotate helically, moving like a wire wrapped around a pole in the windward direction. These spiral currents oscillate between clockwise and counterclockwise rotations, such that in some places the surface waters are pushed together and in others they are pulled apart. Researchers have previously found that at sites of convergence the bubbles produced by breaking waves are pushed to depths of 15 meters or more, with important implications for air-sea gas mixing and other processes.

Swiss Experiment: Design, implemention and use of a cross-disciplinary infrastructure for data intensive science

NASA Astrophysics Data System (ADS)

Dawes, N.; Salehi, A.; Clifton, A.; Bavay, M.; Aberer, K.; Parlange, M. B.; Lehning, M.

2010-12-01

It has long been known that environmental processes are cross-disciplinary, but data has continued to be acquired and held for a single purpose. Swiss Experiment is a rapidly evolving cross-disciplinary, distributed sensor data infrastructure, where tools for the environmental science community stem directly from computer science research. The platform uses the bleeding edge of computer science to acquire, store and distribute data and metadata from all environmental science disciplines at a variety of temporal and spatial resolutions. SwissEx is simultaneously developing new technologies to allow low cost, high spatial and temporal resolution measurements such that small areas can be intensely monitored. This data is then combined with existing widespread, low density measurements in the cross-disciplinary platform to provide well documented datasets, which are of use to multiple research disciplines. We present a flexible, generic infrastructure at an advanced stage of development. The infrastructure makes the most of Web 2.0 technologies for a collaborative working environment and as a user interface for a metadata database. This environment is already closely integrated with GSN, an open-source database middleware developed under Swiss Experiment for acquisition and storage of generic time-series data (2D and 3D). GSN can be queried directly by common data processing packages and makes data available in real-time to models and 3rd party software interfaces via its web service interface. It also provides real-time push or pull data exchange between instances, a user management system which leaves data owners in charge of their data, advanced real-time processing and much more. The SwissEx interface is increasingly gaining users and supporting environmental science in Switzerland. It is also an integral part of environmental education projects ClimAtscope and O3E, where the technologies can provide rapid feedback of results for children of all ages and where the data from their own stations can be compared to national data networks.

Mission possible: creating a technology infrastructure to help reduce administrative costs.

PubMed

Alper, Michael

2003-01-01

Controlling administrative costs associated with managed care benefits has traditionally been considered a "mission impossible" in healthcare, with the unreasonably high cost of paperwork and administration pushing past the $420 billion mark. Why administrative costs remain a critical problem in healthcare while other industries have alleviated their administrative burdens must be carefully examined. This article looks at the key factors contributing to high administrative costs and how these costs can be controlled in the future with "mission possible" tools, including business process outsourcing, IT outsourcing, technology that helps to bring "consumerism" to managed care, and an IT infrastructure that improves quality and outcomes.

Green, Clean, & Mean: Pushing the Energy Envelope in Tech Industry Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mills, Evan; Granderson, Jessica; Chan, Rengie

When it comes to innovation in energy and building performance, one can expect leading-edge activity from the technology sector. As front-line innovators in design, materials science, and information management, developing and operating high-performance buildings is a natural extension of their core business. The energy choices made by technology companies have broad importance given their influence on society at large as well as the extent of their own energy footprint. Microsoft, for example, has approximately 250 facilities around the world (30 million square feet of floor area), with significant aggregate energy use of approximately 4 million kilowatt-hours per day (Figure 1).