The Labor Market Imperative for CTE: Changes and Challenges for the 21st Century

ERIC Educational Resources Information Center

Stringfield, Sam; Stone, James R., III.

2017-01-01

The labor market in the United States is evolving in unexpected ways following the 2007 recession. Career and technical education (CTE) has historically linked young people to the workplace. In this article we examine the U.S. labor market and provide multiple perspectives on its growth and direction and implications for future directions for CTE.…

Aspects of the dimensional changes of jersey structures after knitting process

NASA Astrophysics Data System (ADS)

Szabo, M.; Barbu, I.; Jiaru, L.

2017-08-01

The study proposes a statistical analysis by applying a mathematical model for the study of the dimensional changes of jersey structures made of 100% cotton yarn, with 58/1 metric count of yarn. The Structures are presented as tubular knitted metrage and are designed for underwear and/or outer garments. By analysing the jersey structures, from dimensional stability point of view, there can be observed that values in the limits are within the ±2% interval, values which are considered appropriate. Following the experimental researches, there are proposed solutions for the reduction of dimensional changes on both directions of the knit, on the stich course direction and also on the stich courses in vertical direction, being analyzed the behaviour of the knitted fabrics during relaxation after knitting process. The problem of the dimensional stability of the knitted fabrics is extensive researched. The knitted structures are elastic structures, this being a reason for which dimensional stability will always be a topical theme. The jersey structures, due to the distribution of the platinum loop in the knit plane, due to the relative small number of yarn-yarn contact points that causes the threads to slide into the structure, due to the spiral of the tubular metrage structure, are among those whose dimensional stability is difficult to control. The technical characteristics of the yarns, the technical characteristics of the knitting machines and the technological parameters of the knitting machine are the elements which will be correlated in order to obtain structures with minimum dimensional changes. In order to obtain knitted structures with adequate dimensional stability, this means within ±2%, it is necessary that the dimensional changes during the relaxation periods after knitting and chemical finishing being minimum. For this, all the processes to be applied will be conducted with appropriate and uniform tensions throughout the technological flow. The relaxation periods of 72 hours should be strictly respected, folded and under standard atmospheric conditions, both after knitting and after chemical finishing. The jersey structures are plane structured made on knitting machines equiped with font. There will be analyzed the dimensional changes of the jersey structures made of 100% cotton yarn, Nm 58/1, after the relaxation after knitting process througout the corelation between the technical characteristics of the yarns, of the technological parameter of the knitting operation and of some technical characteristici of the knitting machine.

77 FR 24709 - Information Collections Being Reviewed by the Federal Communications Commission Under Delegated...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

... direct method of power determination due to technical reasons, the indirect method of determining antenna... antenna input power by the indirect method must determine the value F (efficiency factor) applicable to... antenna system field monitoring point, when the point itself is not changed. (2) A change in the type of...

Regional impacts of technical change: the case of structural particleboard in the United States.

Treesearch

Zhi Xu; David N. Bengston; Hans M. Gregersen; Allen L. Lundgren

1992-01-01

Analyzes the regional impacts of research benefits in the United States due to the introduction of structural particleboard. The distribution of consumer benefits, producer benefits, direct employment impacts, and changes in wood requirements are analyzed for the four census regions. The distribution of benefits is found to differ widely between regions, indicating...

IT [Information Technology] as a Change Agent in Education and National Development.

ERIC Educational Resources Information Center

Pan, Daphne

The case of Singapore illustrates how well-deployed information technology (IT) can be a change agent in education and national development. IT has been a catalyst and enabler of the shift from didactic, passive instruction to interactive, learner-centered and learner-directed instruction. In technical education in particular, IT has served as a…

The Environment and Directed Technical Change†

PubMed Central

Acemoglu, Daron; Aghion, Philippe; Bursztyn, Leonardo

2015-01-01

This paper introduces endogenous and directed technical change in a growth model with environmental constraints. The final good is produced from “dirty” and “clean” inputs. We show that: (i) when inputs are sufficiently substitutable, sustainable growth can be achieved with temporary taxes/subsidies that redirect innovation toward clean inputs; (ii) optimal policy involves both “carbon taxes” and research subsidies, avoiding excessive use of carbon taxes; (iii) delay in intervention is costly, as it later necessitates a longer transition phase with slow growth; and (iv) use of an exhaustible resource in dirty input production helps the switch to clean innovation under laissez-faire. (JEL O33, O44, Q30, Q54, Q56, Q58) PMID:26719595

Effectiveness of facilitated introduction of a standard operating procedure into routine processes in the operating theatre: a controlled interrupted time series.

PubMed

Morgan, Lauren; New, Steve; Robertson, Eleanor; Collins, Gary; Rivero-Arias, Oliver; Catchpole, Ken; Pickering, Sharon P; Hadi, Mohammed; Griffin, Damian; McCulloch, Peter

2015-02-01

Standard operating procedures (SOPs) should improve safety in the operating theatre, but controlled studies evaluating the effect of staff-led implementation are needed. In a controlled interrupted time series, we evaluated three team process measures (compliance with WHO surgical safety checklist, non-technical skills and technical performance) and three clinical outcome measures (length of hospital stay, complications and readmissions) before and after a 3-month staff-led development of SOPs. Process measures were evaluated by direct observation, using Oxford Non-Technical Skills II for non-technical skills and the 'glitch count' for technical performance. All staff in two orthopaedic operating theatres were trained in the principles of SOPs and then assisted to develop standardised procedures. Staff in a control operating theatre underwent the same observations but received no training. The change in difference between active and control groups was compared before and after the intervention using repeated measures analysis of variance. We observed 50 operations before and 55 after the intervention and analysed clinical data on 1022 and 861 operations, respectively. The staff chose to structure their efforts around revising the 'whiteboard' which documented and prompted tasks, rather than directly addressing specific task problems. Although staff preferred and sustained the new system, we found no significant differences in process or outcome measures before/after intervention in the active versus the control group. There was a secular trend towards worse outcomes in the postintervention period, seen in both active and control theatres. SOPs when developed and introduced by frontline staff do not necessarily improve operative processes or outcomes. The inherent tension in improvement work between giving staff ownership of improvement and maintaining control of direction needs to be managed, to ensure staff are engaged but invest energy in appropriate change. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Present Challenges, Critical Needs, and Future Technological Directions for NASA's GN and C Engineering Discipline

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.

2010-01-01

The National Aeronautics and Space Administration (NASA) is currently undergoing a substantial redirection. Notable among the changes occurring within NASA is the stated emphasis on technology development, integration, and demonstration. These new changes within the Agency should have a positive impact on the GN&C discipline given the potential for sizeable investments for technology development and in-space demonstrations of both Autonomous Rendezvous & Docking (AR&D) systems and Autonomous Precision Landing (APL) systems. In this paper the NASA Technical Fellow for Guidance, Navigation and Control (GN&C) provides a summary of the present technical challenges, critical needs, and future technological directions for NASA s GN&C engineering discipline. A brief overview of the changes occurring within NASA that are driving a renewed emphasis on technology development will be presented as background. The potential benefits of the planned GN&C technology developments will be highlighted. This paper will provide a GN&C State-of-the-Discipline assessment. The discipline s readiness to support the goals & objectives of each of the four NASA Mission Directorates is evaluated and the technical challenges and barriers currently faced by the discipline are summarized. This paper will also discuss the need for sustained investments to sufficiently mature the several classes of GN&C technologies required to implement NASA crewed exploration and robotic science missions.

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contract. (d) All technical direction shall be issued in writing by the COR. (e) The Contractor must... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

77 FR 38173 - Agreements and Memoranda of Understanding Between the Food and Drug Administration and Other...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

... in the Federal Register of March 23, 2012 (77 FR 16923), a direct final rule making technical changes to update a requirement that many of its written agreements and memoranda of understanding with other...

Field evaluation and assessment of thermal energy storage for residential space heating

NASA Astrophysics Data System (ADS)

Hersh, H. N.

1982-02-01

A data base was developed based on two heating seasons and 45 test and 30 control homes in Maine and Vermont. Based on first analysis of monitored temperatures and electrical energy used for space heating, fuel bills and reports of users and utilities, the technical performance of TES ceramic and hydronic systems is deemed to be technically satisfactory and there is a high degree of customer acceptance and positive attitudes towards TES. Analysis of house data shows a high degree of variability in electric heat energy demand for a given degree-day. An analysis is underway to investigate relative differences in the efficiency of electricity utilization of storage and direct heating devices. The much higher price of storge systems relative to direct systems is an impediment to market penetration. A changing picture of rate structures may encourage direct systems at the expense of storage systems.

1986 Proteus Survey: Technical Manual and Codebook

DTIC Science & Technology

1992-06-01

Officer Candidate School and Direct Commission) and by gender. Female officers were oversampled (30% in the sample versus ap- proximately 16% in the...analyze the effects of this change in policy both on the individual cadets and on the Academy and to study the process of coeducation over four years...Candidate School (OCS), and Direct Commissioning (DC). Approximately 1,000 officers were randomly selected from each commissioning year group 1980-1984 from

Renewable Energy and Climate Change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chum, H. L.

2012-01-01

The Intergovernmental Panel on Climate Change issued the Special Report on Renewable Energy Sources and Climate Change Mitigation (SRREN) at http://srren.ipcc-wg3.de/ (May 2011 electronic version; printed form ISBN 978-1-107-60710-1, 2012). More than 130 scientists contributed to the report.* The SRREN assessed existing literature on the future potential of renewable energy for the mitigation of climate change within a portfolio of mitigation options including energy conservation and efficiency, fossil fuel switching, RE, nuclear and carbon capture and storage (CCS). It covers the six most important renewable energy technologies - bioenergy, direct solar, geothermal, hydropower, ocean and wind, as well as theirmore » integration into present and future energy systems. It also takes into consideration the environmental and social consequences associated with these technologies, the cost and strategies to overcome technical as well as non-technical obstacles to their application and diffusion.« less

31 CFR 21.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... technical services” shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Professional and technical services...

14 CFR 1271.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technical services” shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Professional and technical services. 1271...

40 CFR 34.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... technical services” shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Professional and technical services. 34...

24 CFR 87.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... technical services shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Professional and technical services...

22 CFR 712.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... technical services” shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 712.300...

22 CFR 311.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... technical services shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 311.300...

45 CFR 604.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technical services” shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 45 Public Welfare 3 2011-10-01 2011-10-01 false Professional and technical services. 604.300...

Surgeons' and trainees' perceived self-efficacy in operating theatre non-technical skills.

PubMed

Pena, G; Altree, M; Field, J; Thomas, M J W; Hewett, P; Babidge, W; Maddern, G J

2015-05-01

An important factor that may influence an individual's performance is self-efficacy, a personal judgement of capability to perform a particular task successfully. This prospective study explored newly qualified surgeons' and surgical trainees' self-efficacy in non-technical skills compared with their non-technical skills performance in simulated scenarios. Participants undertook surgical scenarios challenging non-technical skills in two simulation sessions 6 weeks apart. Some participants attended a non-technical skills workshop between sessions. Participants completed pretraining and post-training surveys about their perceived self-efficacy in non-technical skills, which were analysed and compared with their performance in surgical scenarios in two simulation sessions. Change in performance between sessions was compared with any change in participants' perceived self-efficacy. There were 40 participants in all, 17 of whom attended the non-technical skills workshop. There was no significant difference in participants' self-efficacy regarding non-technical skills from the pretraining to the post-training survey. However, there was a tendency for participants with the highest reported self-efficacy to adjust their score downwards after training and for participants with the lowest self-efficacy to adjust their score upwards. Although there was significant improvement in non-technical skills performance from the first to second simulation sessions, a correlation between participants' self-efficacy and performance in scenarios in any of the comparisons was not found. The results suggest that new surgeons and surgical trainees have poor insight into their non-technical skills. Although it was not possible to correlate participants' self-belief in their abilities directly with their performance in a simulation, in general they became more critical in appraisal of their abilities as a result of the intervention. © 2015 BJS Society Ltd Published by John Wiley & Sons Ltd.

29 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... technical services shall be limited to advice and analysis directly applying any professional or technical... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 29 Labor 1 2011-07-01 2011-07-01 false Professional and technical services. 93.300 Section 93.300...

Changing culture in the home health setting: strategies for success.

PubMed

Boan, David

2006-01-01

Organizational culture is generally defined as the internal attributes of the staff, such as their values, beliefs, and attitudes. Although technically accurate as a definition, personal attributes defy direct intervention, leading some to question whether it is possible to change culture. It is proposed that it is possible to change the personal internal attributes that define organizational culture by changing the characteristic structures and behaviors of the organization that shape those attributes. This model, called the Quality Capability Model, creates an approach to culture change that accommodates the unique features of home health.

The Micropolitics of Innovation--Revisited.

ERIC Educational Resources Information Center

Foster, Garrett R.; Richardson, Gerald L.

1980-01-01

Among the important factors in the success of organized change efforts involving local schools are direct personal contact of local entrepreneurs and internal advocacy groups, moral and technical support of the district administration, access to interpretive information about new ideas and teaching programs, and faculty acceptance of innovation.…

International Trends in Heritage and Environmental Interpretation: Future Directions for Australian Research and Practice.

ERIC Educational Resources Information Center

Ballantyne, Roy; Uzzell, David

1999-01-01

In the past decade, heritage and environmental interpretation shifted from technical emphasis to social perspective, reflected in five international trends: growing concern with theory, increasing ecotourism and consequent changes in environmental interpretation, reactions to globalization (homogeneity versus uniqueness), interpretation of…

Project Interface Requirements Process Including Shuttle Lessons Learned

NASA Technical Reports Server (NTRS)

Bauch, Garland T.

2010-01-01

Most failures occur at interfaces between organizations and hardware. Processing interface requirements at the start of a project life cycle will reduce the likelihood of costly interface changes/failures later. This can be done by adding Interface Control Documents (ICDs) to the Project top level drawing tree, providing technical direction to the Projects for interface requirements, and by funding the interface requirements function directly from the Project Manager's office. The interface requirements function within the Project Systems Engineering and Integration (SE&I) Office would work in-line with the project element design engineers early in the life cycle to enhance communications and negotiate technical issues between the elements. This function would work as the technical arm of the Project Manager to help ensure that the Project cost, schedule, and risk objectives can be met during the Life Cycle. Some ICD Lessons Learned during the Space Shuttle Program (SSP) Life Cycle will include the use of hardware interface photos in the ICD, progressive life cycle design certification by analysis, test, & operations experience, assigning interface design engineers to Element Interface (EI) and Project technical panels, and linking interface design drawings with project build drawings

Vacuum boilers developed heating surfaces technic and economic efficiency evaluation

NASA Astrophysics Data System (ADS)

Slobodina, E. N.; Mikhailov, A. G.; Semenov, B. A.

2018-01-01

The vacuum boilers as manufacturing proto types application analysis was carried out, the possible directions for the heating surfaces development are identified with a view to improving the energy efficiency. Economic characteristics to evaluate the vacuum boilers application efficiency (Net Discounted Income (NDI), Internal Rate of Return (IRR), Profitability Index (PI) and Payback Period) are represented. The given type boilers application technic and economic efficiency criteria were established. NDI changing curves depending on the finning coefficient and operating pressure were obtained as a result of the conducted calculation studies.

DOE Advanced Scientific Computing Advisory Committee (ASCAC) Subcommittee Report on Scientific and Technical Information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hey, Tony; Agarwal, Deborah; Borgman, Christine

The Advanced Scientific Computing Advisory Committee (ASCAC) was charged to form a standing subcommittee to review the Department of Energy’s Office of Scientific and Technical Information (OSTI) and to begin by assessing the quality and effectiveness of OSTI’s recent and current products and services and to comment on its mission and future directions in the rapidly changing environment for scientific publication and data. The Committee met with OSTI staff and reviewed available products, services and other materials. This report summaries their initial findings and recommendations.

Modeling technical change in climate analysis: evidence from agricultural crop damages.

PubMed

Ahmed, Adeel; Devadason, Evelyn S; Al-Amin, Abul Quasem

2017-05-01

This study accounts for the Hicks neutral technical change in a calibrated model of climate analysis, to identify the optimum level of technical change for addressing climate changes. It demonstrates the reduction to crop damages, the costs to technical change, and the net gains for the adoption of technical change for a climate-sensitive Pakistan economy. The calibrated model assesses the net gains of technical change for the overall economy and at the agriculture-specific level. The study finds that the gains of technical change are overwhelmingly higher than the costs across the agriculture subsectors. The gains and costs following technical change differ substantially for different crops. More importantly, the study finds a cost-effective optimal level of technical change that potentially reduces crop damages to a minimum possible level. The study therefore contends that the climate policy for Pakistan should consider the role of technical change in addressing climate impacts on the agriculture sector.

Expressive/Exploratory Technical Writing (XTW) in Engineering: Shifting the Technical Writing Curriculum

ERIC Educational Resources Information Center

Warnock, Scott; Kahn, Michael

2007-01-01

While the importance of "expressive writing," or informal, self-directed writing, has been well established, teachers underutilize it, particularly in technical writing courses. We introduce the term expressive/exploratory technical writing (XTW), which is the use of informal, self-directed writing to problem-solve in technical fields. We describe…

40 CFR Appendix D to Part 136 - Precision and Recovery Statements for Methods for Measuring Metals

Code of Federal Regulations, 2010 CFR

2010-07-01

... Spectroscopy (Direction Aspiration) and Colorimetry”, National Technical Information Service, 5285 Port Royal... Spectroscopy (Direct Aspiration) and Colorimetry”, National Technical Information Service, 5285 Port Royal Road... Absorption Spectroscopy (Direct Aspiration) and Colorimetry”, National Technical Information Service, 5285...

APPROACH TO INDUSTRIAL TRAINING, AN ASSESSMENT OF THE MAIN TASKS FACING INDUSTRIAL TRAINING BOARDS--A STATEMENT BY THE CENTRAL TRAINING COUNCIL. MEMORANDUM NUMBER 5.

ERIC Educational Resources Information Center

Ministry of Labour, London (England).

THE INDUSTRIAL TRAINING BOARDS' MAIN TASKS UNDER THE INDUSTRIAL TRAINING ACT ARE TO (1) ASSESS THE MANPOWER AND TRAINING REQUIREMENTS OF EACH INDUSTRY (BASED ON FORECASTS OF GROWTH OR CONTRACTION OF INDUSTRY, TECHNICAL, DEMOGRAPHIC, AND EDUCATIONAL CHANGE, AND CHANGES IN THE LEVEL AND DIRECTION OF DEMAND FOR GOODS AND SERVICES), (2) DRAW UP…

48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (3) Reviewing and, where required by the contract, approving, technical reports, drawings... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... (3) Reviewing and, where required by the contract, approving, technical reports, drawings... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... (3) Reviewing and, where required by the contract, approving, technical reports, drawings... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... (3) Reviewing and, where required by the contract, approving, technical reports, drawings... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Professional and technical services. 69...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Professional and technical services. 138.205...

44 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Professional and technical...

38 CFR 45.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... technical services. 45.300 Section 45.300 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS...

38 CFR 45.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., “professional and technical services” shall be limited to advice and analysis directly applying any professional... provide advice and analysis directly applying their professional or technical expertise and unless the... technical services. 45.205 Section 45.205 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Professional and technical services. 227.205...

22 CFR 519.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 519.205...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Professional and technical services. 227.205...

44 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... 44 Emergency Management and Assistance 1 2011-10-01 2011-10-01 false Professional and technical...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Professional and technical services. 138.205...

38 CFR 45.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... technical services. 45.300 Section 45.300 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS...

49 CFR 20.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 49 Transportation 1 2011-10-01 2011-10-01 false Professional and technical services. 20.300...

The globalization of technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reid, P.P.

1991-01-01

The past two decades have seen dramatic change in the distribution and organization of corporate technical activities worldwide. Japan's rapid ascent to the status of technological superpower, the steady rise in technical strength of Europe's leading economies, and the rapid growth in technical competence of an expanding group of newly industrialized nations have put an end to the era of U.S. technological supremacy. Meanwhile, a rapid expansion of private foreign direct investment and a proliferation of international corporate alliances have increased the economic and technological interdependence of industrialized nations. As a result of these changes, the process of technology development,more » application, and diffusion in a growing number of industries has become increasingly globalized. The following figures document this trend, which will have far-reaching implications for U.S. business practices and federal competitiveness policies. The diagrams address R and D personnel per 10,000 labor force, nondefense R and D spending, high-technology exports, investments in other countries, foreign investment in the United States, and transnational alliances.« less

Technical and Economic Assessment of the Implementation of Measures for Reducing Energy Losses in Distribution Systems

NASA Astrophysics Data System (ADS)

Aguila, Alexander; Wilson, Jorge

2017-07-01

This paper develops a methodology to assess a group of measures of electrical improvements in distribution systems, starting from the complementation of technical and economic criteria. In order to solve the problem of energy losses in distribution systems, technical and economic analysis was performed based on a mathematical model to establish a direct relationship between the energy saved by way of minimized losses and the costs of implementing the proposed measures. This paper aims at analysing the feasibility of reducing energy losses in distribution systems, by changing existing network conductors by larger crosssection conductors and distribution voltage change at higher levels. The impact of this methodology provides a highly efficient mathematical tool for analysing the feasibility of implementing improvement projects based on their costs which is a very useful tool for the distribution companies that will serve as a starting point to the analysis for this type of projects in distribution systems.

75 FR 13680 - Commutation of Sentence: Technical Change

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-23

... Sentence: Technical Change AGENCY: Bureau of Prisons, Justice. ACTION: Interim rule. SUMMARY: This document makes a minor technical change to the Bureau of Prisons (Bureau) regulations on sentence commutation to.... Commutation of Sentence: Technical Change This document makes a minor technical change to the Bureau...

45 CFR 1230.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... 45 Public Welfare 4 2010-10-01 2010-10-01 false Professional and technical services. 1230.300...

45 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 45 Public Welfare 1 2010-10-01 2010-10-01 false Professional and technical services. 93.300...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Professional and technical services. 138.300...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 45 Public Welfare 1 2010-10-01 2010-10-01 false Professional and technical services. 93.205...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Professional and technical services...

13 CFR 146.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... analysis directly applying their professional or technical expertise and unless the advice or analysis is... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Professional and technical...

32 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and technical services” shall be limited to advice and analysis directly applying any professional or... and analysis directly applying their professional or technical expertise and unless the advice or... 32 National Defense 1 2010-07-01 2010-07-01 false Professional and technical services. 28.300...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... their professional or technical expertise and unless the advice or analysis is rendered directly and... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Professional and technical services. 411.205...

20 CFR 438.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... their professional or technical expertise and unless the advice or analysis is rendered directly and... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Professional and technical services. 438.300...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Professional and technical services. 227.300...

32 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., “professional and technical services” shall be limited to advice and analysis directly applying any professional... provide advice and analysis directly applying their professional or technical expertise and unless the... 32 National Defense 1 2010-07-01 2010-07-01 false Professional and technical services. 28.205...

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... their professional or technical expertise and unless the advice or analysis is rendered directly and... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Professional and technical services. 18...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Professional and technical services. 69...

48 CFR 1852.242-70 - Technical direction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Direction (SEP 1993) (a) Performance of the work under this contract is subject to the written technical... the Contracting Officer in writing in accordance with NASA FAR Supplement 1842.270. “Technical... in writing by the COTR. (d) The Contractor shall proceed promptly with the performance of technical...

45 CFR 1158.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... their professional or technical expertise and unless the advice or analysis is rendered directly and... 45 Public Welfare 3 2011-10-01 2011-10-01 false Professional and technical services. 1158.205...

10 CFR 601.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 10 Energy 4 2011-01-01 2011-01-01 false Professional and technical services. 601.300 Section 601...

45 CFR 1230.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... section, “professional and technical services” shall be limited to advice and analysis directly applying... this section unless they provide advice and analysis directly applying their professional or technical... 45 Public Welfare 4 2011-10-01 2011-10-01 false Professional and technical services. 1230.205...

41 CFR 105-69.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... section, “professional and technical services” shall be limited to advice and analysis directly applying... this section unless they provide advice and analysis directly applying their professional or technical... technical services. 105-69.205 Section 105-69.205 Public Contracts and Property Management Federal Property...

22 CFR 519.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 519.300...

22 CFR 311.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 311.205...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... their professional or technical expertise and unless the advice or analysis is rendered directly and... 34 Education 1 2011-07-01 2011-07-01 false Professional and technical services. 82.300 Section 82...

32 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., “professional and technical services” shall be limited to advice and analysis directly applying any professional... provide advice and analysis directly applying their professional or technical expertise and unless the... 32 National Defense 1 2011-07-01 2011-07-01 false Professional and technical services. 28.205...

41 CFR 105-69.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., “professional and technical services” shall be limited to advice and analysis directly applying any professional... provide advice and analysis directly applying their professional or technical expertise and unless the... technical services. 105-69.300 Section 105-69.300 Public Contracts and Property Management Federal Property...

The relationship between counselors' technical skills, clients' in-session verbal responses, and outcome in smoking cessation treatment.

PubMed

Lindqvist, Helena; Forsberg, Lars; Enebrink, Pia; Andersson, Gerhard; Rosendahl, Ingvar

2017-06-01

The technical component of Motivational Interviewing (MI) posits that client language mediates the relationship between counselor techniques and subsequent client behavioral outcomes. The purpose of this study was to examine this hypothesized technical component of MI in smoking cessation treatment in more depth. Secondary analysis of 106 first treatment sessions, derived from the Swedish National Tobacco Quitline, and previously rated using the Motivational Interviewing Sequential Code for Observing Process Exchanges (MI-SCOPE) Coder's Manual and the Motivational Interviewing Treatment Integrity code (MITI) Manual, version 3.1. The outcome measure was self-reported 6-month continuous abstinence at 12-month follow-up. Sequential analyses indicated that clients were significantly more likely than expected by chance to argue for change (change talk) following MI-consistent behaviors and questions and reflections favoring change. Conversely, clients were more likely to argue against change (sustain talk) following questions and reflections favoring status-quo. Parallel mediation analysis revealed that a counselor technique (reflections of client sustain talk) had an indirect effect on smoking outcome at follow-up through client language mediators. The study makes a significant contribution to our understanding of how MI works in smoking cessation treatment and adds further empirical support for the hypothesized technical component in MI. The results emphasize the importance of counselors avoiding unintentional reinforcement of sustain talk and underline the need for a greater emphasis on the direction of questions and reflections in MI trainings and fidelity measures. Copyright © 2017 Elsevier Inc. All rights reserved.

[Assessment and comparison of hospital operating efficiency under different management systems].

PubMed

2017-06-18

To assess and analyze the operation efficiency of 8 commission general public hospitals managed directly by National Health and Family Planning Commission and 8 municipal general hospitals managed directly by Beijing Municipal Administration of Hospitals in Beijing and to provide suggestions on improving service capacity and designing relevant health policy. Input and output data of 8 commission hospitals and 8 municipal hospitals were obtained from Beijing Direct-Reported Health Statistics data from 2011 to 2014. Data envelopment analysis was used as the hospital operation efficiency measurement tool. The CCR and BCC models were built to calculate technical efficiency (TE), pure technical efficiency (PTE), scale efficiency (SE) and the status of scale efficiency of 16 hospitals in 2011 and 2014; the Malmquist index model was built to analyze the total factor productivity change (TFPC), technological change (TC), technical efficiency change, pure technical efficiency change and scale efficiency change of the 16 hospitals from 2011 to 2014. In 2011, the TE, PTE and SE of the commission hospitals were higher than those of the municipal hospitals, and the TEs of the commission hospitals and the municipal hospitals were 0.918 and 0.873 respectively. In 2014, the TE, PTE and SE of commission hospitals were lower than those of the municipal hospitals, and the TE of the commission hospitals and the municipal hospitals were 0.906 and 0.951, respectively, which was contrary to the results in 2011. According to the Malmquist index model, the average of TFPC of the municipal hospitals was larger than that of the commission hospitals, the former increased 5.9% and the latter increased 2.8% per year; the average of TC was greater than the one in both the municipal hospitals and the commission hospitals, with a growth of 3.2% and 2.9% per year, respectively; the average growth of PTE in the commission hospitals was lower than that of the municipal hospitals, and the average descent of SE in the commission hospitals was larger than that in the municipal hospitals. There are significant differences in the operation efficiency between different management systems and the main factors associated with operation efficiency are the technological and management level. Given scale efficiency status and macroeconomic medical policies, the commission hospitals and the municipal hospitals require further adjusting the distribution of medical resources, and it is of great significance for all the commission hospitals and the municipal hospitals to improve the management level and resource integration capability.

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Professional and technical services...

31 CFR 21.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Professional and technical services...

40 CFR 34.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Professional and technical services. 34...

14 CFR 1271.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Professional and technical services. 1271...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... professional or technical expertise and unless the advice or analysis is rendered directly and solely in the... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Professional and technical services. 411.300...

48 CFR 1052.201-70 - Contracting Officer's Technical Representative (COTR) Designation and Authority.

Code of Federal Regulations, 2010 CFR

2010-10-01

... in writing. The term “technical direction” includes, without limitation, direction to the contractor... the actions of the contractor's employees. (d) Technical direction may be oral or in writing. The COTR... Technical Representative (COTR) Designation and Authority. 1052.201-70 Section 1052.201-70 Federal...

22 CFR 712.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Professional and technical services. 712.205...

45 CFR 604.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 45 Public Welfare 3 2011-10-01 2011-10-01 false Professional and technical services. 604.205...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... professional or technical expertise and unless the advice or analysis is rendered directly and solely in the... 45 Public Welfare 3 2011-10-01 2011-10-01 false Professional and technical services. 1158.300...

40 CFR 34.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... applying their professional or technical expertise and unless the advice or analysis is rendered directly... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Professional and technical services. 34...

47 CFR 25.215 - Technical requirements for space stations in the Direct Broadcast Satellite Service.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 2 2012-10-01 2012-10-01 false Technical requirements for space stations in... Technical requirements for space stations in the Direct Broadcast Satellite Service. In addition to § 25.148(f), space station antennas operating in the Direct Broadcast Satellite Service must be designed to...

47 CFR 25.215 - Technical requirements for space stations in the Direct Broadcast Satellite Service.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 2 2013-10-01 2013-10-01 false Technical requirements for space stations in... Technical requirements for space stations in the Direct Broadcast Satellite Service. In addition to § 25.148(f), space station antennas operating in the Direct Broadcast Satellite Service must be designed to...

47 CFR 25.215 - Technical requirements for space stations in the Direct Broadcast Satellite Service.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false Technical requirements for space stations in... Technical requirements for space stations in the Direct Broadcast Satellite Service. In addition to § 25.148(f), space station antennas operating in the Direct Broadcast Satellite Service must be designed to...

47 CFR 25.215 - Technical requirements for space stations in the Direct Broadcast Satellite Service.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Technical requirements for space stations in... Technical requirements for space stations in the Direct Broadcast Satellite Service. In addition to § 25.148(f), space station antennas operating in the Direct Broadcast Satellite Service must be designed to...

Mobilization and Defense Management Technical Reports Series. A Framework for Increasing Defense Production by Reducing Perceived Opportunity Costs.

DTIC Science & Technology

1983-05-01

advertising. Traditionally defense marketing and advertising focused on decision makers within the defense conuunity and Congress. While it appears that...focus may be- starting to change, marketing and advertising remain highly directed and concentrated in defense oriented media. marketing was oriented to

The Open College of the North West, Distance Learning, and the "Open Tech" Programme.

ERIC Educational Resources Information Center

Percy, Keith; Saunders, Murray

1982-01-01

A regional program of pre-university courses in northwestern England open to adults with no entry qualifications is discussed. It uses some distance learning techniques but is investigating expansion to technical education through distance learning. The complexities and potential costs of such a substantial directional change are examined. (MSE)

Innovation Incubator: LiquidCool Solutions Technical Evaluation. Laboratory Study and Demonstration Results of a Directed-Flow, Liquid Submerged Server for High-Efficiency Data Centers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kozubal, Eric J

LiquidCool Solutions (LCS) has developed liquid submerged server (LSS) technology that changes the way computer electronics are cooled. The technology provides an option to cool electronics by the direct contact flow of dielectric fluid (coolant) into a sealed enclosure housing all the electronics of a single server. The intimate dielectric fluid contact with electronics improves the effectiveness of heat removal from the electronics.

Managing ISR sharing policies at the network edge using Controlled English

NASA Astrophysics Data System (ADS)

Parizas, Christos; Pizzocaro, Diego; Preece, Alun; Zerfos, Petros

2013-05-01

In domains such as emergency response and military operations the sharing of Intelligence, Surveillance and Reconnaissance (ISR) assets among different coalition partners is regulated through policies. Traditionally, poli­ cies are created at the center of a coalitions network by high-level decision makers and expressed in low-level policy languages (e.g. Common Information Model SPL) by technical personnel, which makes them difficult to be understood by non-technical users at the edge of the network. Moreover, policies must often be modified by negotiation among coalition partners, typically in rapid response to the changing operational situation. Com­ monly, the users who must cope first with situational changes are those on the edge, so it would be very effective if they were able to create and negotiate policies themselves. We investigate the use of Controlled English (CE) as a means to define a policy representation that is both human-friendly and machine processable. We show how a CE model can capture a variety of policy types, including those based on a traditional asset ownership model, and those defining team-based asset sharing across a coalition. The use of CE is intended to benefit coalition networks by bridging the gap between technical and non-technical users in terms of policy creation and negoti­ ation, while at the same time being directly processable by a policy-checking system without transformation to any other technical representation.

Recent revisions to and recommendations for national health expenditures accounting

PubMed Central

Haber, Susan G.; Newhouse, Joseph P.

1991-01-01

The Health Care Financing Administration (HCFA) has importantly revised the methodology for estimating annual national health expenditures. Among other changes, the revisions estimated out-of-pocket spending directly, disaggregated expenditures to a greater degree, and reduced undercounting and double counting. Estimates of total spending and out-of-pocket spending changed. This article summarizes a meeting of a technical advisory panel, convened by HCFA, that reviewed the modifications adopted and made recommendations for future revisions. PMID:10114932

Exploring the reproducibility of functional connectivity alterations in Parkinson’s disease

PubMed Central

Onu, Mihaela; Wu, Tao; Roceanu, Adina; Bajenaru, Ovidiu

2017-01-01

Since anatomic MRI is presently not able to directly discern neuronal loss in Parkinson’s Disease (PD), studying the associated functional connectivity (FC) changes seems a promising approach toward developing non-invasive and non-radioactive neuroimaging markers for this disease. While several groups have reported such FC changes in PD, there are also significant discrepancies between studies. Investigating the reproducibility of PD-related FC changes on independent datasets is therefore of crucial importance. We acquired resting-state fMRI scans for 43 subjects (27 patients and 16 normal controls, with 2 replicate scans per subject) and compared the observed FC changes with those obtained in two independent datasets, one made available by the PPMI consortium (91 patients, 18 controls) and a second one by the group of Tao Wu (20 patients, 20 controls). Unfortunately, PD-related functional connectivity changes turned out to be non-reproducible across datasets. This could be due to disease heterogeneity, but also to technical differences. To distinguish between the two, we devised a method to directly check for disease heterogeneity using random splits of a single dataset. Since we still observe non-reproducibility in a large fraction of random splits of the same dataset, we conclude that functional heterogeneity may be a dominating factor behind the lack of reproducibility of FC alterations in different rs-fMRI studies of PD. While global PD-related functional connectivity changes were non-reproducible across datasets, we identified a few individual brain region pairs with marginally consistent FC changes across all three datasets. However, training classifiers on each one of the three datasets to discriminate PD scans from controls produced only low accuracies on the remaining two test datasets. Moreover, classifiers trained and tested on random splits of the same dataset (which are technically homogeneous) also had low test accuracies, directly substantiating disease heterogeneity. PMID:29182621

78 FR 68370 - Endangered and Threatened Wildlife and Plants; Technical Corrections for Kirtland's Warbler

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-14

... Corrections for Kirtland's Warbler AGENCY: Fish and Wildlife Service, Interior. ACTION: Direct final rule... (Kirtland's warbler) under the Endangered Species Act of 1973, as amended (Act). We are revising the List of... documents a taxonomic change (scientific name) to Kirtland's warbler (50 CFR 17.11(h)). The basis for the...

Serials Management in the Electronic Era: Papers in Honor of Peter Gellatly, Founding Editor of "The Serials Librarian."

ERIC Educational Resources Information Center

Cole, Jim, Ed.; Williams, James W., Ed.

This book assesses progress and technical changes in the field of serials management and anticipates future directions and challenges for librarians. The book consists of 18 chapters: (1) "Introduction" (Jim Cole and James W. Williams); (2) "Peter Gellatly--Editor with a Deft Touch" (Ruth C. Carter); (3) "The "Deseret…

Is a Schools' Performance Related to Technical Change?--A Study on the Relationship between Innovations and Secondary School Productivity

ERIC Educational Resources Information Center

Haelermans, Carla; Blank, Jos L. T.

2012-01-01

This paper examines the relation between innovations and productivity in Dutch secondary schools. Innovation clusters are directly included in the production model. In order to correct for differences between schools, we add school type, region and year controls. The results indicate that process innovations, teacher professionalization…

Technical Report on Occupations in Numerically Controlled Metal-Cutting Machining.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Employment Service.

At the present time, only 5 percent of the short-run metal-cutting machining in the United States is done by numerically controlled machined tools, but within the next decade it is expected to increase by 50 percent. Numerically controlled machines use taped data which is changed into instructions and directs the machine to do certain steps…

32 CFR 250.6 - Responsibilities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... WITHHOLDING OF UNCLASSIFIED TECHNICAL DATA FROM PUBLIC DISCLOSURE § 250.6 Responsibilities. (a) The Under... technical data that may be withheld from public disclosure under this Directive. (5) Establish procedures to... with this Directive. (2) Disseminate and withhold from public disclosure technical data subject to this...

32 CFR 250.6 - Responsibilities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... WITHHOLDING OF UNCLASSIFIED TECHNICAL DATA FROM PUBLIC DISCLOSURE § 250.6 Responsibilities. (a) The Under... technical data that may be withheld from public disclosure under this Directive. (5) Establish procedures to... with this Directive. (2) Disseminate and withhold from public disclosure technical data subject to this...

32 CFR 250.6 - Responsibilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... WITHHOLDING OF UNCLASSIFIED TECHNICAL DATA FROM PUBLIC DISCLOSURE § 250.6 Responsibilities. (a) The Under... technical data that may be withheld from public disclosure under this Directive. (5) Establish procedures to... with this Directive. (2) Disseminate and withhold from public disclosure technical data subject to this...

32 CFR 250.6 - Responsibilities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... WITHHOLDING OF UNCLASSIFIED TECHNICAL DATA FROM PUBLIC DISCLOSURE § 250.6 Responsibilities. (a) The Under... technical data that may be withheld from public disclosure under this Directive. (5) Establish procedures to... with this Directive. (2) Disseminate and withhold from public disclosure technical data subject to this...

32 CFR 250.6 - Responsibilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... WITHHOLDING OF UNCLASSIFIED TECHNICAL DATA FROM PUBLIC DISCLOSURE § 250.6 Responsibilities. (a) The Under... technical data that may be withheld from public disclosure under this Directive. (5) Establish procedures to... with this Directive. (2) Disseminate and withhold from public disclosure technical data subject to this...

Imaging of the peripheral retina

PubMed Central

Kernt, Marcus; Kampik, Anselm

2013-01-01

The technical progress of the recent years has revolutionized imaging in ophthalmology. Scanning laser ophthalmoscopy (SLO), digital angiography, optical coherence tomography (OCT), and detection of fundus autofluorescence (FAF) have fundamentally changed our understanding of numerous retinal and choroidal diseases. Besides the tremendous advances in macular diagnostics, there is more and more evidence that central pathologies are often directly linked to changes in the peripheral retina. This review provides a brief overview on current posterior segment imaging techniques with a special focus on the peripheral retina. PMID:24391370

Modeling of technical soil-erosion control measures and its impact on soil erosion off-site effects within urban areas

NASA Astrophysics Data System (ADS)

Dostal, Tomas; Devaty, Jan

2013-04-01

The paper presents results of surface runoff, soil erosion and sediment transport modeling using Erosion 3D software - physically based mathematical simulation model, event oriented, fully distributed. Various methods to simulate technical soil-erosion conservation measures were tested, using alternative digital elevation models of different precision and resolution. Ditches and baulks were simulated by three different approaches, (i) by change of the land-cover parameters to increase infiltration and decrease flow velocity, (ii) by change of the land-cover parameters to completely infiltrate the surface runoff and (iii) by adjusting the height of the digital elevation model by "burning in" the channels of the ditches. Results show advantages and disadvantages of each approach and conclude suitable methods for combinations of particular digital elevation model and purpose of the simulations. Further on a set of simulations was carried out to model situations before and after technical soil-erosion conservation measures application within a small catchment of 4 km2. These simulations were focused on quantitative and qualitative assessment of technical soil-erosion control measures impact on soil erosion off-site effects within urban areas located downstream of intensively used agricultural fields. The scenarios were built upon a raster digital elevation model with spatial resolution of 3 meters derived from LiDAR 5G vector point elevation data. Use of this high-resolution elevation model allowed simulating the technical soil-erosion control measures by direct terrain elevation adjustment. Also the structures within the settlements were emulated by direct change in the elevation of the terrain model. The buildings were lifted up to simulate complicated flow behavior of the surface runoff within urban areas, using approach of Arévalo (Arévalo, 2011) but focusing on the use of commonly available data without extensive detailed editing. Application of the technical soil-erosion control measures induced strong change in overall amount of eroded/deposited material as well as spatial erosion/deposition patterns within the settlement areas. Validation of modeled scenarios and effects on measured data was not possible as no real runoff event was recorded in the target area so the conclusions were made by comparing the different modeled scenarios. Advantages and disadvantages of used approach to simulate technical soil-erosion conservation measures are evaluated and discussed as well as the impact of use of high-resolution elevation data on the intensity and spatial distribution of soil erosion and deposition. Model approved ability to show detailed distribution of damages over target urban area, which is very sensitive for off-site effects of surface runoff, soil erosion and sediment transport and also high sensitivity to input data, especially to DEM, which affects surface runoff pattern and therefore intensity of harmful effects. Acknowledgement: This paper has been supported by projects: Ministry of the interior of the CR VG 20122015092, and project NAZV QI91C008 TPEO.

Bioimpedance for the spot measurement of tissue density

NASA Astrophysics Data System (ADS)

Dylke, E. S.; Ward, L. C.; Stannard, C.; Leigh, A.; Kilbreath, S. L.

2013-04-01

Long-standing lymphoedema is characterised by tissues changes which are currently not detectable using bioimpedance spectroscopy. It has been suggested that a combination of bipolar and tetrapolar measurements may be used to detect these tissues changes for a single site in the transverse direction. This was technique was trialled in a group of control participants with no history of lymphoedema or recent upper limb trauma. Repeated spot measurements were done without removal of electrodes to determine biological variability as well as with removal of electrodes to determine technical reproducibility. The inter-limb spot ratio of the controls was then compared to that of a number of women previously diagnosed with secondary lymphoedema in the forearm. Biological variability was not found to greatly influence repeated measures but only moderate technical reliability was found despite excellent co-efficient of variation for the majority of the measurements. A difference was seen between those with more severe swelling and the controls. This novel technique shows promise in detecting tissue changes associated with long-standing lymphoedema.

Integrating Higher Education Financial Aid and Financing Policy: Case Studies from the "Changing Direction" Technical Assistance States

ERIC Educational Resources Information Center

Bell, Julie Davis; Blanco, Cheryl D.; Conger, Sharmila Basu; Lingenfelter, Paul E.; Michelau, Demaree K.; Wright, David L.

2008-01-01

Throughout the end of the 1990s and the early years of the current decade, states experienced severe downturns in their economies. As has happened during other recessions, higher education, often viewed as discretionary spending compared to other budget demands, was hit particularly hard. During these years of severe fiscal constraints, however, a…

76 FR 18664 - Airworthiness Directives; The Boeing Company Model 767 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-05

... apply to The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes. That NPRM published... time have changed the text of AWLs No. 28-AWL-27 and No. 28-AWL- 28. Therefore, either of the revisions..., may be used. Request To Extend Compliance Time CAL had no technical objection to the original NPRM...

Trends in Microfabrication Capabilities & Device Architectures.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bauer, Todd; Jones, Adam; Lentine, Anthony L.

The last two decades have seen an explosion in worldwide R&D, enabling fundamentally new capabilities while at the same time changing the international technology landscape. The advent of technologies for continued miniaturization and electronics feature size reduction, and for architectural innovations, will have many technical, economic, and national security implications. It is important to anticipate possible microelectronics development directions and their implications on US national interests. This report forecasts and assesses trends and directions for several potentially disruptive microfabrication capabilities and device architectures that may emerge in the next 5-10 years.

Research on the industry environmental total factor productivity in Jiangsu Province based on the SBM-SML

NASA Astrophysics Data System (ADS)

Lingfang, Sun; Han, Wang; Jian, Gong

2017-03-01

This paper uses the SBM-SML to measure the industry environmental total factor productivity in Jiangsu province of its 13 cities during 2005-2014 with SO2 emissions as the undesirable output, and discomposes the total factor productivity into the pure technical efficiency, the scale efficiency change, the pure technical change and the scale technical change. The research shows that the overall trend of the industry environmental total factor productivity is increasing in Jiangsu province during 2005-2014, the technical change is a main reason pushing up growth rates of economy, and the pure technical change is the intrinsic motivation of the technical change.Introduction.

[The changing picture of practicing dentistry].

PubMed

Hokwerda, O

2006-03-01

Originally, dentists were particularly technical and curative practitioners. Nowadays, patient care is brought into focus, directed at maintaining oral health permanently by prevention and necessary curative treatments as a contribution to general health and well-being. The changing picture of praccising does not develop as a matter-of-course since many factors have an effect on dental practice. Effecting factors are: content concerning developments, technological advancements, legislation, government policies, organizational aspects, and typical characteristics of dental practitioners. The changing picture of practising dentistry is connected with uncertainty, proves to be hard to control, and some adjustments occur around practising.

Implementing Culture Change in Nursing Homes: An Adaptive Leadership Framework

PubMed Central

Corazzini, Kirsten; Twersky, Jack; White, Heidi K.; Buhr, Gwendolen T.; McConnell, Eleanor S.; Weiner, Madeline; Colón-Emeric, Cathleen S.

2015-01-01

Purpose of the Study: To describe key adaptive challenges and leadership behaviors to implement culture change for person-directed care. Design and Methods: The study design was a qualitative, observational study of nursing home staff perceptions of the implementation of culture change in each of 3 nursing homes. We conducted 7 focus groups of licensed and unlicensed nursing staff, medical care providers, and administrators. Questions explored perceptions of facilitators and barriers to culture change. Using a template organizing style of analysis with immersion/crystallization, themes of barriers and facilitators were coded for adaptive challenges and leadership. Results: Six key themes emerged, including relationships, standards and expectations, motivation and vision, workload, respect of personhood, and physical environment. Within each theme, participants identified barriers that were adaptive challenges and facilitators that were examples of adaptive leadership. Commonly identified challenges were how to provide person-directed care in the context of extant rules or policies or how to develop staff motivated to provide person-directed care. Implications: Implementing culture change requires the recognition of adaptive challenges for which there are no technical solutions, but which require reframing of norms and expectations, and the development of novel and flexible solutions. Managers and administrators seeking to implement person-directed care will need to consider the role of adaptive leadership to address these adaptive challenges. PMID:24451896

Technical skills acquisition in surgery-bound senior medical students: an evaluation of student assertiveness.

PubMed

Talbott, Vanessa A; Marks, Joshua A; Bodzin, Adam S; Comeau, Jason A; Maxwell, Pinckney J; Isenberg, Gerald A; Martin, Niels D

2012-01-01

To prepare students pursuing surgical careers, we devised a senior subinternship curriculum supplement that focused on the acquisition of technical skills required of surgical residents. We hypothesized that more assertive students, those that accomplished more of the curriculum, would perform better on a technical skills Objective Structured Clinical Examination (OSCE). Senior medical students rotating on their first general surgery subinternship were administered a 6-station OSCE on the first day of their subinternship and again during the final week of the month-long rotation. A self-directed, 38-task "scavenger hunt" representing common intern level clinical skills, procedures, and patient care activities was provided to each student. The study was performed at Jefferson Medical College, a large, private medical school in Philadelphia, PA. Forty-nine senior students completed surgical subinternships between July 2009 and September 2010, and participated both in the pre-/post-OSCEs and the scavenger hunt. Students performed significantly better on the post-rotation OSCE than on the pre-rotation OSCE; 70.2% ± 8.1% vs. 60.4% ± 12.0%, p < 0.0001. Assertiveness scores from the "scavenger hunt" did not correlate with final OSCE scores (r = -0.328, p = 0.25), and were negatively correlated with the change between pre- and post-OSCE scores (r = -0.573, p < 0.04). Individual student assertiveness scores were determined by the number of tasks completed over the course of the rotation. As surgical education becomes more streamlined with evolving work hour restrictions, medical school education is playing an increasingly pivotal role in preparing students for internship. In our study, individual assertiveness in completing structured self-directed learning tasks did not directly predict the acquisition of proficiency in technical skills. We feel assertiveness is overshadowed by other factors that may carry more weight in terms of technical skills acquisition. Further studies are required to delineate these factors and ultimately enhance technical skills acquisition during medical school. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Framework for incorporating simulation into urology training.

PubMed

Arora, Sonal; Lamb, Benjamin; Undre, Shabnam; Kneebone, Roger; Darzi, Ara; Sevdalis, Nick

2011-03-01

• Changes to working hours, new technologies and increased accountability have rendered the need for alternative training environments for urologists. • Simulation offers a promising arena for learning to take place in a safe, realistic setting. • Despite its benefits, the incorporation of simulation into urological training programmes remains minimal. • The current status and future directions of simulation for training in technical and non-technical skills are reviewed as they pertain to urology. • A framework is presented for how simulation-based training could be incorporated into the entire urological curriculum. • The literature on simulation in technical and non-technical skills training is reviewed, with a specific focus upon urology. • To fully integrate simulation into a training curriculum, its possibilities for addressing all the competencies required by a urologist must be realized. • At an early stage of training, simulation has been used to develop basic technical skills and cognitive skills, such as decision-making and communication. • At an intermediate stage, the studies focus upon more advanced technical skills learnt with virtual reality simulators. • Non-technical skills training would include leadership and could be delivered with in situ models. • At the final stage, experienced trainees can practise technical and non-technical skills in full crisis simulations situated within a fully-simulated operating rooms. • Simulation can provide training in the technical and non-technical skills required to be a competent urologist. • The framework presented may guide how best to incorporate simulation into training curricula. • Future work should determine whether acquired skills transfer to clinical practice and improve patient care. © 2010 THE AUTHORS. BJU INTERNATIONAL © 2010 BJU INTERNATIONAL.

Climate change vulnerability assessments as catalysts for social learning: four case studies in south-eastern Australia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Preston, Benjamin L

2012-01-01

Technical assessments of vulnerability and/or risk are increasingly being undertaken to assess the impacts of climate change. Underlying this is the belief that they will bring clarity to questions regarding the scale of institutional investments required, plausible adaptation policies and measures, and the timing of their implementation. Despite the perceived importance of technical assessments in 'evidence-based' decision environments, assessments cannot be undertaken independent of values and politics, nor are they capable of eliminating the uncertainty that clouds decision-making on climate adaptation As such, assessments can trigger as many questions as they answer, leaving practitioners and stakeholders to question their value.more » This paper explores the value of vulnerability/risk assessments in climate change adaptation planning processes as a catalyst for learning in four case studies in Southeastern Australia. Data were collected using qualitative interviews with stakeholders involved in the assessments and analysed using a social learning framework. This analysis revealed that detailed and tangible strategies or actions often do not emerge directly from technical assessments. However, it also revealed that the assessments became important platforms for social learning. In providing these platforms, assessments present opportunities to question initial assumptions, explore multiple framings of an issue, generate new information, and galvanise support for collective actions. This study highlights the need for more explicit recognition and understanding of the important role social learning plays in climate change vulnerability assessments and adaptation planning more broadly.« less

Improved Management of the Technical Interfaces Between the Hanford Tank Farm Operator and the Hanford Waste Treatment Plant - 13383

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duncan, Garth M.; Saunders, Scott A.

2013-07-01

The Department of Energy (DOE) is constructing the Waste Treatment and Immobilization Plant (WTP) at the Hanford site in Washington to treat and immobilize approximately 114 million gallons of high level radioactive waste (after all retrievals are accomplished). In order for the WTP to be designed and operated successfully, close coordination between the WTP engineering, procurement, and construction contractor, Bechtel National, Inc. and the tank farms operating contractor (TOC), Washington River Protection Solutions, LLC, is necessary. To develop optimal solutions for DOE and for the treatment of the waste, it is important to deal with the fact that two differentmore » prime contractors, with somewhat differing contracts, are tasked with retrieving and delivering the waste and for treating and immobilizing that waste. The WTP and the TOC have over the years cooperated to manage the technical interface. To manage what is becoming a much more complicated interface as the WTP design progresses and new technical issues have been identified, an organizational change was made by WTP and TOC in November of 2011. This organizational change created a co-located integrated project team (IPT) to deal with mutual and interface issues. The Technical Organization within the One System IPT includes employees from both TOC and WTP. This team has worked on a variety of technical issues of mutual interest and concern. Technical issues currently being addressed include: - The waste acceptance criteria; - Waste feed delivery and the associated data quality objectives (DQO); - Evaluation of the effects of performing a riser cut on a single shell tank on WTP operations; - The disposition of secondary waste from both TOC and WTP; - The close coordination of the TOC double shell tank mixing and sampling program and the Large Scale Integrated Test (LSIT) program for pulse jet mixers at WTP along with the associated responses to the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2010-2; - Development of a set of alternatives to the current baseline that involve aspects of direct feed, feed conditioning, and design changes. The One System Technical Organization has served WTP, TOC, and DOE well in managing and resolving issues at the interface. This paper describes the organizational structure used to improve the interface and several examples of technical interface issues that have been successfully addressed by the new organization. (authors)« less

The economic basis for national science and technology policy

NASA Technical Reports Server (NTRS)

Dunn, D. A.

1979-01-01

National science and technology policy is concerned with societal choices with respect to the rate and directions of technological change and the adoption and use of new technology in society. Such policy choices occur primarily in connection with management of the creation, dissemination, and use of scientific and technical information. Two categories of policy instruments discussed are market-oriented approaches, and direct public action. Possibilities for increased use of market-oriented approaches that can provide benefits to society in the form of an increased rate of innovation and of more 'appropriate' technology, better suited to the needs of consumers are indicated.

Direct Final Rule: Nonroad Diesel Technical Amendments and Tier 3 Technical Relief Provision

EPA Pesticide Factsheets

Rule making certain technical corrections to the rules establishing emission standards for nonroad diesel engines and amending those rules to provide manufacturers with a production technical relief provision for Tier 3 equipment.

Dental Fitness Class 3 Treatment Needs: A Report of Consultation

DTIC Science & Technology

1992-10-20

services of the Defense Technical Information Center (per DOD Instruction 5200.21) may purchase copies directly from the following: Defense Technical ...All other requests for these reports will be directed to the fowing: :9 U.S. Department of Commerce i’-? National Technical Information Services (NTIS...oral malignancies. 12 Temporomandibular joint disorders - myofascial pain dysfunction; dislocation, subluxation or other associated conditions. 13

Technical aspects of MRI signal change quantification after gadolinium-based contrast agents' administration.

PubMed

Ramalho, Joana; Ramalho, Miguel; AlObaidy, Mamdoh; Semelka, Richard C

2016-12-01

Over the last 2years several studies have been published regarding gadolinium deposition in brain structures in patients with normal renal function after repeated administrations of gadolinium-based contrast agents (GBCAs). Most of the publications are magnetic resonance imaging (MRI) based retrospective studies, where gadolinium deposition may be indirectly measured by evaluating changes in T1 signal intensity (SI) in brain tissue, particularly in the dentate nucleus (DN) and/or globus pallidi (GP). The direct correlation between T1 signal changes and gadolinium deposition was validated by human pathology studies. However, the variability of the MR equipment and parameters used across different publications, along with the inherent limitations of MRI to assess gadolinium in human tissues should be acknowledged when interpreting those studies. Nevertheless, MRI studies remain essential regarding gadolinium bio-distribution knowledge. The aim of this paper is to overview current knowledge of technical aspects of T1 signal intensity evaluation by MRI and describe confounding factors, with the intention to achieve higher accuracy and maximize reproducibility. Copyright © 2016 Elsevier Inc. All rights reserved.

Assessing and Managing Natural Resource Damages: Continuing Challenges and Opportunities.

PubMed

Barnthouse, Lawrence W; Stahl, Ralph G

2017-05-01

In a 2002 paper, we discussed the technical challenges associated with quantifying natural resource injuries, service losses and damages, and suggested some actions that might help to overcome them. An important suggestion was to consider using some of the approaches in ecological risk assessment to help evaluate potential natural resource injuries, and ultimately in some cases to help translate those injuries into natural resource service loss. This was based on the observation that ecological risk assessment and natural resource damage assessments use much of the same types of data, but at that time the experience base with ecological risk assessment was greater than for natural resource damage assessments. We also discussed some of the issues in applying the then current Department of Interior natural resource damage assessments regulations. Since our 2002 publication the scientific literature, relevant regulations, the global context and more have changed. In the current paper we focus on the technical and regulatory changes in natural resource damage assessments practice since 2002, and use recent reports and publications to illustrate those changes and identify new directions in natural resource damage assessments.

Assessing and Managing Natural Resource Damages: Continuing Challenges and Opportunities

NASA Astrophysics Data System (ADS)

Barnthouse, Lawrence W.; Stahl, Ralph G.

2017-05-01

In a 2002 paper, we discussed the technical challenges associated with quantifying natural resource injuries, service losses and damages, and suggested some actions that might help to overcome them. An important suggestion was to consider using some of the approaches in ecological risk assessment to help evaluate potential natural resource injuries, and ultimately in some cases to help translate those injuries into natural resource service loss. This was based on the observation that ecological risk assessment and natural resource damage assessments use much of the same types of data, but at that time the experience base with ecological risk assessment was greater than for natural resource damage assessments. We also discussed some of the issues in applying the then current Department of Interior natural resource damage assessments regulations. Since our 2002 publication the scientific literature, relevant regulations, the global context and more have changed. In the current paper we focus on the technical and regulatory changes in natural resource damage assessments practice since 2002, and use recent reports and publications to illustrate those changes and identify new directions in natural resource damage assessments.

Addressing the Barriers to Agile Development in the Department of Defense: Program Structure, Requirements, and Contracting

DTIC Science & Technology

2015-04-30

approach directly contrast with the traditional DoD acquisition model designed for a single big-bang waterfall approach (Broadus, 2013). Currently...progress, reduce technical and programmatic risk, and respond to feedback and changes more quickly than traditional waterfall methods (Modigliani...requirements, and contracting. The DoD can address these barriers by utilizing a proactively tailored Agile acquisition model , implementing an IT Box

New Directions in Two-Year College Mathematics. Proceedings of the Sloan Foundation Conference on Two-Year College Mathematics (Atherton, California, July 11-14, 1984).

ERIC Educational Resources Information Center

Albers, Donald J., Ed.; And Others

Conference papers on the state of mathematics in the two-year college are presented. The papers are grouped according to main topic areas and each group of papers is followed by a summary of conference discussions. The topics addressed are: a case for curriculum change, technical mathematics, the influence of new technologies on mathematics…

Weapon System Costing Methodology for Aircraft Airframes and Basic Structures. Volume I. Technical Volume

DTIC Science & Technology

1975-06-01

the Air Force Flight Dynamics Laboratory for use in conceptual and preliminary designs pauses of weapon system development. The methods are a...trade study method provides ai\\ iterative capability stemming from a direct interface with design synthesis programs. A detailed cost data base ;ind...system for data expmjsion is provided. The methods are designed for ease in changing cost estimating relationships and estimating coefficients

Cellular Mechanisms of Transcranial Direct Current Stimulation

DTIC Science & Technology

2016-07-14

REPORT TYPE. State the type of report, such as final, technical, interim, memorandum, master’s thesis, progress, quarterly, research , special, group ...in fEPSP timing was not resolved. Importantly, grouping across all pathways (e.g. not controlling pathway selectivity), 8 V/m radial positive fields...each signal group during DCS and in control conditions (no electrical stimulation). F) Changes in synaptic strength for each signal group under all

State Solar Technical Assistance | State, Local, and Tribal Governments |

Science.gov Websites

NREL State Solar Technical Assistance State Solar Technical Assistance Request Assistance Subscribe to Email Updates NREL provides direct technical assistance to state and local governments on expert testimony on policy best practices. The Solar Technical Assistance Team (STAT) Network is designed

77 FR 18716 - Transportation Security Administration Postal Zip Code Change; Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

... organizational changes and it has no substantive effect on the public. DATES: Effective March 28, 2012. FOR... No. 1572-9] Transportation Security Administration Postal Zip Code Change; Technical Amendment AGENCY: Transportation Security Administration, DHS. ACTION: Final rule. SUMMARY: This rule is a technical change to...

7 CFR 1470.8 - Technical and other assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Technical and other assistance. 1470.8 Section 1470.8... Provisions § 1470.8 Technical and other assistance. (a) NRCS may provide technical assistance to an eligible applicant or participant either directly or through a technical service provider as set forth in 7 CFR part...

Technical Assistance Model for Long-Term Systems Change: Three State Examples

ERIC Educational Resources Information Center

Kasprzak, Christina; Hurth, Joicey; Lucas, Anne; Marshall, Jacqueline; Terrell, Adriane; Jones, Elizabeth

2010-01-01

The National Early Childhood Technical Assistance Center (NECTAC) Technical Assistance (TA) Model for Long-Term Systems Change (LTSC) is grounded in conceptual frameworks in the literature on systems change and systems thinking. The NECTAC conceptual framework uses a logic model approach to change developed specifically for states' infant and…

The Changing Nature of Technical Assistance.

ERIC Educational Resources Information Center

Noggle, Nelson L.

The changing nature of technical assistance activities and evaluation for compensatory education programs was discussed. The emphasis is on the Education Consolidation and Improvement Act (ECIA) Chapter 1 Technical Assistance Centers (TAC) and their clients. Improvement of school practices demands that the technical assistance process be developed…

Changing behavior towards sustainable practices using Information Technology.

PubMed

Iveroth, Einar; Bengtsson, Fredrik

2014-06-15

This article addresses the question of how to change individuals' behavior towards more sustainable practices using Information Technology (IT). By following a multidisciplinary and socio-technical perspective, this inquiry is answered by applying a new framework-The Commonality Framework for IT-enabled Change-on a case study of sustainable behavioral change. The framework is grounded in practice theory and is used to analyze the implementation of an IT-system aimed at changing citizens' behavior towards more sustainable transport logistics and procurement in Uppsala, Sweden. The article applies case study research design and the empirical data consists of surveys, in-depth and semi-structured interviews, observations and archival documents. The results show how the change towards sustainable practices is an entanglement of both social and technical-structural elements across time. In this process, structures such as IT are the enablers, and the actors and their social activities are the tipping-point factors that ultimately determine the success of changing individuals' behavior towards a more sustainable direction. This article provides a more balanced view of how both actor and structure related properties interact during the on-going work with change towards greater sustainability practices than earlier research has offered. More specifically, the article offers both a lower-level theory and a method from which we can analyze change processes where technology is seen in its context, and where both technology and the human actor is brought forth to center stage. Copyright © 2014 Elsevier Ltd. All rights reserved.

From Lydia Pinkham to Bob Dole: what the changing face of direct-to-consumer drug advertising reveals about the professionalism of medicine.

PubMed

Pinkus, Rosa Lynn

2002-06-01

From its founding in 1847, the AMA divided drugs into "ethical" and "unethical" preparations. Those that were ethical had a known composition and were advertised only to the profession. Other, patent medicines (technically proprietary drugs, whose trademarks were protected by copyright), were sold directly to the public. In spite of the AMA's efforts to ban the advertising and sale of those nostrums, proprietary drugs flourished during the nineteenth century. Starting in 1900, however, three major societal trends combined to bolster the AMA's campaign, and by 1920 almost all advertising was directed to physicians, who would then prescribe medications to their patients. This ban on advertising pharmaceuticals directly to the public remained virtually unchanged until approximately 1980. Since then, it has slowly eroded and, as recently as 1997, the FDA created guidelines for pharmaceutical companies to advertise on television. What does this change say about the profession of medicine, the role of the physician in society, and the doctor-patient relationship? Using a comparative historical approach, this paper examines these issues.

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Professional and technical... RESTRICTIONS ON LOBBYING Activities by Own Employees § 146.205 Professional and technical services. (a) The... technical services rendered directly in the preparation, submission, or negotiation of any bid, proposal, or...

25 CFR 41.26 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Technical assistance. 41.26 Section 41.26 Indians BUREAU... COLLEGES AND NAVAJO COMMUNITY COLLEGE Navajo Community College § 41.26 Technical assistance. The Director of Education shall furnish technical assistance, either directly or through contract, to the College...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Juberg, D.R.; Loch-Caruso, R.

Elevated levels of DDT and other organochlorine pesticides have been associated with spontaneous abortion and preterm birth in several species, including humans. Despite the prevalence of organochlorine pesticides in the environment, a mechanistic basis for this association has not been explored. Furthermore, while DDT has been associated with inhibition of calcium ATPases, altered gap junctional communication and electrophysiological changes, all of which could affect the excitation-contraction process characteristic of smooth muscle, direct effects of DDT on uterine smooth muscle have not been reported. This study was initiated to assess the direct effects of o,p{prime}-DDT (an estrogenic isomer present in themore » technical grade preparation) on pregnant rat uterine tissue.« less

The Changing Role of Vocational and Technical Education and Training (VOTEC). Women in Vocational and Technical Education: Changes and Challenges.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

Changes in the vocational and technical education (VTE) opportunities available for women in Organisation for Economic Cooperation Development (OECD) member countries in response to changing labor markets and job skill requirements were discussed at a June 1994 meeting of experts. The discussions focused on the following issues: gender differences…

10 CFR 440.23 - Oversight, training, and technical assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Oversight, training, and technical assistance. 440.23... PERSONS § 440.23 Oversight, training, and technical assistance. (a) The Secretary and the appropriate..., directly or indirectly, training and technical assistance to any grantee or subgrantee. Such training and...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 3 2010-10-01 2010-10-01 false Professional and technical services. 1158.300... Other Than Own Employees § 1158.300 Professional and technical services. (a) The prohibition on the use..., if the payment is for professional or technical services rendered directly in the preparation...

Technical and Vocational Education in Nigeria: Issues, Challenges and a Way Forward

ERIC Educational Resources Information Center

Okoye, Reko; Arimonu, Maxwell Onyenwe

2016-01-01

Technical education, as enshrined in the Nigerian national policy on education, is concerned with qualitative technological human resources development directed towards a national pool of skilled and self reliant craftsmen, technicians and technologists in technical and vocational education fields. In Nigeria, the training of technical personnel…

7 CFR 2003.18 - Functional organization of RHS.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and 504 Rural Housing direct and guaranteed loan and grant programs, Rural Housing and Self-Help Site loans, the Self-Help Technical Assistance grant program, Housing Application Packaging and Technical and Supervisory Assistance grants, and Home Improvement and Repaid loans and grants. The office directs the...

7 CFR 2003.18 - Functional organization of RHS.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and 504 Rural Housing direct and guaranteed loan and grant programs, Rural Housing and Self-Help Site loans, the Self-Help Technical Assistance grant program, Housing Application Packaging and Technical and Supervisory Assistance grants, and Home Improvement and Repaid loans and grants. The office directs the...

7 CFR 2003.18 - Functional organization of RHS.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and 504 Rural Housing direct and guaranteed loan and grant programs, Rural Housing and Self-Help Site loans, the Self-Help Technical Assistance grant program, Housing Application Packaging and Technical and Supervisory Assistance grants, and Home Improvement and Repaid loans and grants. The office directs the...

7 CFR 2003.18 - Functional organization of RHS.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and 504 Rural Housing direct and guaranteed loan and grant programs, Rural Housing and Self-Help Site loans, the Self-Help Technical Assistance grant program, Housing Application Packaging and Technical and Supervisory Assistance grants, and Home Improvement and Repaid loans and grants. The office directs the...

78 FR 23556 - Supplemental Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-19

...] Supplemental Notice of Technical Conference Docket Nos. Filing via the Internet RM07-16-000 Electronic Tariff... hold a technical conference on April 16, 2013 from 10:00 a.m. to 1:00 p.m. (EST) to demonstrate changes... there have been changes affecting the off-site broadcast of the technical conference. \\1\\ Notice of...

European regulations and their impact on tissue banking.

PubMed

Tatarenko, Alina

2006-01-01

Extensive CoE-EU cooperation ensures coherence and complementarities between the principles of the CoE guides which can be regarded as recommendations on best practice, and the technical requirements of the EU directives which set out legally binding requirements. This means that the same standards now exist throughout European continent. Having a common set of standards facilitates cooperation between different healthcare systems, especially in cases of emergencies, and the export-import issues. Adoption of the same quality management and traceability systems helps to minimise the risks and prevent disease transmissions. It reassures patients who undergo treatments outside of their countries. The tissue establishments need to introduce technical and structural changes to adhere to the new regulations which ultimately results in saving and improving of lives of many patients.

Implementing Culture Change in Nursing Homes: An Adaptive Leadership Framework.

PubMed

Corazzini, Kirsten; Twersky, Jack; White, Heidi K; Buhr, Gwendolen T; McConnell, Eleanor S; Weiner, Madeline; Colón-Emeric, Cathleen S

2015-08-01

To describe key adaptive challenges and leadership behaviors to implement culture change for person-directed care. The study design was a qualitative, observational study of nursing home staff perceptions of the implementation of culture change in each of 3 nursing homes. We conducted 7 focus groups of licensed and unlicensed nursing staff, medical care providers, and administrators. Questions explored perceptions of facilitators and barriers to culture change. Using a template organizing style of analysis with immersion/crystallization, themes of barriers and facilitators were coded for adaptive challenges and leadership. Six key themes emerged, including relationships, standards and expectations, motivation and vision, workload, respect of personhood, and physical environment. Within each theme, participants identified barriers that were adaptive challenges and facilitators that were examples of adaptive leadership. Commonly identified challenges were how to provide person-directed care in the context of extant rules or policies or how to develop staff motivated to provide person-directed care. Implementing culture change requires the recognition of adaptive challenges for which there are no technical solutions, but which require reframing of norms and expectations, and the development of novel and flexible solutions. Managers and administrators seeking to implement person-directed care will need to consider the role of adaptive leadership to address these adaptive challenges. © The Author 2014. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Man, mind, and machine: the past and future of virtual reality simulation in neurologic surgery.

PubMed

Robison, R Aaron; Liu, Charles Y; Apuzzo, Michael L J

2011-11-01

To review virtual reality in neurosurgery, including the history of simulation and virtual reality and some of the current implementations; to examine some of the technical challenges involved; and to propose a potential paradigm for the development of virtual reality in neurosurgery going forward. A search was made on PubMed using key words surgical simulation, virtual reality, haptics, collision detection, and volumetric modeling to assess the current status of virtual reality in neurosurgery. Based on previous results, investigators extrapolated the possible integration of existing efforts and potential future directions. Simulation has a rich history in surgical training, and there are numerous currently existing applications and systems that involve virtual reality. All existing applications are limited to specific task-oriented functions and typically sacrifice visual realism for real-time interactivity or vice versa, owing to numerous technical challenges in rendering a virtual space in real time, including graphic and tissue modeling, collision detection, and direction of the haptic interface. With ongoing technical advancements in computer hardware and graphic and physical rendering, incremental or modular development of a fully immersive, multipurpose virtual reality neurosurgical simulator is feasible. The use of virtual reality in neurosurgery is predicted to change the nature of neurosurgical education, and to play an increased role in surgical rehearsal and the continuing education and credentialing of surgical practitioners. Copyright © 2011 Elsevier Inc. All rights reserved.

Technical change in forest sector models: the global forest products model approach

Treesearch

Joseph Buongiorno; Sushuai Zhu

2015-01-01

Technical change is developing rapidly in some parts of the forest sector, especially in the pulp and paper industry where wood fiber is being substituted by waste paper. In forest sector models, the processing of wood and other input into products is frequently represented by activity analysis (input–output). In this context, technical change translates in changes...

Technical Change in the North American Forestry Sector: A Review

Treesearch

Jeffery C. Stier; David N. Bengston

1992-01-01

Economists have examined the impact of technical change on the forest products sector using the historical, index number, and econometric approaches. This paper reviews econometric analyses of the rate and bias of technical change, examining functional form, factors included, and empirical results. Studies are classified as first- second-, or third-generation...

Whither Ballistic Missile Defense?

DTIC Science & Technology

1992-11-30

Conference on Technical Marketing 2000: Opportunities and Strategies for a Changing World) I intend to discuss the prospects for SDI in a changing...Technical Marketing 2000: Opportunities and Strategies for a Changing World) Descriptors, Keywords: Cooper Speech Ballistic Missile Defense...WHITHER BALLISTIC MISSILE DEFENSE? BY AMBASSADOR HENRY F. COOPER NOVEMBER 30,1992 TECHNICAL MARKETING SOCIETY OF AMERICA WASHINGTON, DC

Better Jobs, Brighter Futures, a Stronger Washington. Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2015

2015-01-01

The world is changing rapidly. With changes in technology, demographics, and workforce trends, Washington needs colleges to not only keep pace, but lead the way. Washington's 34 community and technical colleges answer that call. The community and technical colleges have proven uniquely positioned to adapt to, embrace, and ignite change. Community…

Development of the Environmental Technical Information System

DTIC Science & Technology

1975-04-01

official Department oi the Army position, unless so designated by other authorized documents. «CC:,;!;I?N tw HIS . ■ " ftIM B c ii a UN, " □ j...regulations that may concern the Army. CHLUS is complete tor six states and lor areas ot federal jurisdiction, and datu tor another ten stales are...Theoretical Analysis 20 Isolating The Export Industries: Direct Methods Description of the Models 24 Economic Impact on Local Businesses Change in

What to Do About That Pack of Wolves at the Door: A Binational Organization and Acquisitions Approach to Homeland Cruise Missile Defense

DTIC Science & Technology

2016-04-04

land attack cruise missiles (LACMs) within the context of the changing geopolitical environment. The research analyzes the current state of NORAD’s...homeland cruise missile defense apparatus with respect to its organization and technical capability. The principle argument is that land attack cruise...defense for the homeland. 15. SUBJECT TERMS: land attack cruise missiles, cruise missile defense, homeland defense, NORAD, directed energy 16

The World Health Organization: Is It Still Relevant?

PubMed

Ferguson, Stephanie L

2015-01-01

The World Health Organization (WHO) is the United Nation's lead agency for directing and coordinating health. As leaders, nurse executives must advocate for a stronger nursing and midwifery health policy agenda at the global level and a seat at the table on WHO's technical advisory bodies and expert committees. There are no more borders as nurse executives; we are global citizens, leading global change. Nurse leaders hold the master key to shape the world's policies for sustainable global development.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, WIlliam W.

2003-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

The Benefits of Career and Technical Education. Trends and Issues Alert.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Career and technical education (CTE) can benefit students directly by providing earning advantages before and after graduation. It can benefit them indirectly by increasing engagement, retention, and persistence and by directing them to postsecondary education and pursuit of lifelong learning. CTE programs motivate students to get involved in…

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2013 CFR

2013-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2012 CFR

2012-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2014 CFR

2014-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report summarizes geothermal technical assistance, R&D, and technology transfer activities of the Geo-Heat Center. It describes 95 contacts with parties during this period related to technical assistance with goethermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment, economics, and resources. Research activities are summarized on geothermal district heating system cost evaluation and silica waste utilization project. Outreach activities include publication of a geothermal direct use Bulletin, dissemination of information, goethermal library, technical papers and seminars, and progress monitor reports on geothermal resources and utilization.

Soft Skills: The New Curriculum for Hard-Core Technical Professionals

ERIC Educational Resources Information Center

Bancino, Randy; Zevalkink, Claire

2007-01-01

In this article, the authors talk about the importance of soft skills for hard-core technical professionals. In many technical professions, the complete focus of education and training is on technical topics either directly or indirectly related to a career or discipline. Students are generally required to master various mathematics skills,…

Analysis of the Technical Writing Profession through the DACUM Process.

ERIC Educational Resources Information Center

Nolan, Timothy; Green, Marc

To help develop a curriculum program for technical writers, Cincinnati Technical College used the Developing a Curriculum (DACUM) method to produce a technical writing skills profile. DACUM develops an occupation analysis through a modified brainstorming process by a panel of expert workers under the direction of a qualified coordinator. This…

Assessment of the Effects of Climate Change on Federal Hydropower

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sale, Michael J.; Shih-Chieh, Kao; Ashfaq, Moetasim

As directed by Congress in Section 9505 of the SECURE Water Act of 2009 (Public Law 111-11), the US Department of Energy (DOE), in consultation with the federal Power Marketing Administrations (PMAs) and other federal agencies, including federal dam owners, has prepared a comprehensive assessment examining the effects of climate change on water available for hydropower at federal facilities and on the marketing of power from these federal facilities. This Oak Ridge National Laboratory report, referred to as the “9505 Assessment,” describes the technical basis for the report to Congress that was called for in the SECURE Water Act.

7 CFR 652.3 - Administration.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.3 Administration. (a) As provided in this part, the Department will provide technical assistance to participants directly, or at the option of the participant, through a technical service provider in accordance with the...

Verification of Accurate Technical Insight: A Prerequisite for Self-Directed Surgical Training

ERIC Educational Resources Information Center

Hu, Yinin; Kim, Helen; Mahmutovic, Adela; Choi, Joanna; Le, Ivy; Rasmussen, Sara

2015-01-01

Simulation-based surgical skills training during preclinical education is a persistent challenge due to time constraints of trainees and instructors alike. Self-directed practice is resource-efficient and flexible; however, insight into technical proficiency among trainees is often lacking. The purpose of this study is to prospectively assess the…

47 CFR 25.148 - Licensing provisions for the Direct Broadcast Satellite Service.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... who do not provide service to Alaska and Hawaii, must provide technical analyses to the Commission demonstrating that such service is not feasible as a technical matter, or that while technically feasible such... § 25.215 (Technical) and § 25.601 (EEO), and in paragraph (f) of this section. Each winner also will be...

Graduates Placement Report, 1981: New Hampshire Technical Institute and New Hampshire Vocational-Technical Colleges.

ERIC Educational Resources Information Center

New Hampshire State Dept. of Education, Concord. Div. of Post-Secondary Education.

The New Hampshire Technical Institute (NHTI) and the six New Hampshire Vocational-Technical Colleges (NHVTC) offer collegiate education preparing men and women for direct employment in business, industry, health, and service-related fields. At the completion of the 1980-81 academic year, 1036 students had graduated from 48 different programs…

Balancing the health workforce: breaking down overall technical change into factor technical change for labour-an empirical application to the Dutch hospital industry.

PubMed

Blank, Jos L T; van Hulst, Bart L

2017-02-17

Well-trained, well-distributed and productive health workers are crucial for access to high-quality, cost-effective healthcare. Because neither a shortage nor a surplus of health workers is wanted, policymakers use workforce planning models to get information on future labour markets and adjust policies accordingly. A neglected topic of workforce planning models is productivity growth, which has an effect on future demand for labour. However, calculating productivity growth for specific types of input is not as straightforward as it seems. This study shows how to calculate factor technical change (FTC) for specific types of input. The paper first theoretically derives FTCs from technical change in a consistent manner. FTC differs from a ratio of output and input, in that it deals with the multi-input, multi-output character of the production process in the health sector. Furthermore, it takes into account substitution effects between different inputs. An application of the calculation of FTCs is given for the Dutch hospital industry for the period 2003-2011. A translog cost function is estimated and used to calculate technical change and FTC for individual inputs, especially specific labour inputs. The results show that technical change increased by 2.8% per year in Dutch hospitals during 2003-2011. FTC differs amongst the various inputs. The FTC of nursing personnel increased by 3.2% per year, implying that fewer nurses were needed to let demand meet supply on the labour market. Sensitivity analyses show consistent results for the FTC of nurses. Productivity growth, especially of individual outputs, is a neglected topic in workforce planning models. FTC is a productivity measure that is consistent with technical change and accounts for substitution effects. An application to the Dutch hospital industry shows that the FTC of nursing personnel outpaced technical change during 2003-2011. The optimal input mix changed, resulting in fewer nurses being needed to let demand meet supply on the labour market. Policymakers should consider using more detailed and specific data on the nature of technical change when forecasting the future demand for health workers.

"On-screen" writing and composing: two years experience with Manuscript Manager, Apple II and IBM-PC versions.

PubMed

Offerhaus, L

1989-06-01

The problems of the direct composition of a biomedical manuscript on a personal computer are discussed. Most word processing software is unsuitable because literature references, once stored, cannot be rearranged if major changes are necessary. These obstacles have been overcome in Manuscript Manager, a combination of word processing and database software. As it follows Council of Biology Editors and Vancouver rules, the printouts should be technically acceptable to most leading biomedical journals.

Feasibility and Requirements Analysis of MIS for Operational Patrol Squadrons in the United States Navy.

DTIC Science & Technology

1981-12-01

with statistical data on the -est questions themselves and allows upgrading of the test ques-ion bank or changes in the method of presentation. (5...accessed to meet on-line inquires from users at the OMA, INA, and SSC levels, utilizing a number of different to access similar data. A query capability...technical directive and configured item capability * nonthly Maintanance Plan *Individual material Readiness List (I21RL) SPIE calibration Expand JCN4 Tracki

Technical problems encountered with the LALA-1 flying laboratory

NASA Technical Reports Server (NTRS)

Swidzinski, J.

1978-01-01

A description is given of structural design changes necessitated by the conversion of the An-2R agricultural support aircraft into a flying test bed to be used in feasibility studies evaluating jet engines in agricultural support aircraft. The entire rear of the fuselage was radically modified to permit mounting of the Al-25 jet engine directly behind the trailing edge of the upper wing. The standard piston engine was retained to permit comparison between the two types of power plants in typical agricultural support operations.

A regional technology transfer program. [North Carolina Industrial Applications Center for the Southeast

NASA Technical Reports Server (NTRS)

1979-01-01

The proliferation of online searching capabilities among its industrial clients, changes in marketing staff and direction, use of Dun and Bradstreet marketing service files, growth of the Annual Service Package program, and services delivered to clients at the NASA funded North Carolina Science and Technology Research Center are described. The library search service was reactivated and enlarged, and a survey was conducted on the NC/STRC Technical Bulletin's effectiveness. Several quotations from clients assess the overall value of the Center's services.

48 CFR 209.505-4 - Obtaining access to proprietary information.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Non-disclosure requirements for contractors accessing third party proprietary technical data or... may be required to enter into non-disclosure agreements directly with the third party asserting restrictions on limited rights technical data, commercial technical data, or restricted rights computer...

32 CFR 555.7 - Submission of technical proposals.

Code of Federal Regulations, 2010 CFR

2010-07-01

... research and development laboratories are authorized to submit technical proposals directly to other... 32 National Defense 3 2010-07-01 2010-07-01 true Submission of technical proposals. 555.7 Section... AND NATIONAL CEMETERIES CORPS OF ENGINEERS, RESEARCH AND DEVELOPMENT, LABORATORY RESEARCH AND...

A History of the ARPANET: The First Decade

DTIC Science & Technology

1981-04-01

10 2.2 Major Technical Problems and Approaches 11-12 2.3 Major Changes in Objectives and Approaches 11-19 3, ,3 Scientific and Technical Results and...successful projects ever undertaken by DARPA! The program has initiated extensive changes in the Defense Department’s use of computers as well as in...the ARPANET project represents a similarly far-reaching change in the use of computers by mankind. The full impact of the technical changes set in

The Effect of Technical Assistance on Involvement and Use: The Case of a Research, Evaluation, and Technical Assistance Project

ERIC Educational Resources Information Center

Roseland, Denise; Volkov, Boris B.; Callow-Heusser, Catherine

2011-01-01

In contrast to typical National Science Foundation program evaluations, the Utah State Math Science Partnership-Research, Evaluation and Technical Assistance Project (MSP-RETA) provided technical assistance (TA) in two forms: direct TA for up to 10 projects a year, and professional development sessions for a larger number of project staff. Not…

New Directions for High School Career and Technical Education in Wyoming: A Strategic Plan

ERIC Educational Resources Information Center

Hoachlander, Gary; Klein, Steven; Studier, Carol

2007-01-01

This report offers a plan for improving career and technical education (CTE) in Wyoming, but it is about more than just technical education. Realizing the potential of CTE to contribute to students' mastery of both academic and technical knowledge depends not only on strengthening the CTE curriculum, but also on embedding CTE in a larger program…

Pellissippi State Technical Community College Five-Year Strategic Planning Directions, 1998-2003.

ERIC Educational Resources Information Center

Pellissippi State Technical Community Coll., Knoxville, TN.

The document contains the strategic plan for Pellissippi State Technical Community College (Tennessee). The previous five-year strategic plan, "The Pathfinder Project," was prepared in 1994 but was out of date before the end of the five-year planning cycle. To secure information for projecting new five-year strategic directions and goals…

Evaluating the Validity of the Client Evaluation of Motivational Interviewing Scale in a Brief Motivational Intervention for College Student Drinkers.

PubMed

Madson, Michael B; Villarosa, Margo C; Schumacher, Julie A; Mohn, Richard S

2016-06-01

The Client Evaluation of Motivational Interviewing scale (CEMI) is a measure for assessing client perceptions of clinicians' use of motivational interviewing (MI). This study explored the factorial, convergent and predictive validity of the CEMI with a sample of 137 college students who completed a brief motivational intervention for alcohol harm reduction. A two factor structure was confirmed, supporting previous findings of relational and technical subscales. The CEMI technical subscale partially mediated an increase in readiness to change drinking, while the relational subscale did not. Higher scores on CEMI technical subscale predicted higher scores on the tasks, bond and goals subscales of the Working Alliance Inventory while higher scores on the CEMI relationship subscale predicted an increase in the goals subscale. Finally, the correlations between the CEMI subscales and observer-rated MI spirit score and MI adherent and non-adherent behavioral counts were in the expected directions but did not reach statistical significance. Further revision and evaluation of the CEMI is recommended. Clinical, training and research implications are provided. Copyright © 2016 Elsevier Inc. All rights reserved.

Dentists' restorative decision-making and implications for an 'amalgamless' profession. Part 4: clinical factor.

PubMed

Alexander, G; Hopcraft, M S; Tyas, M J; Wong, Rhk

2017-09-01

The Minamata Convention embodies a worldwide reduction in the production and use of mercury and mercury-containing products and processes, including a phase-down of dental amalgam. This will change the approach to the use of direct restorative materials in the near future. There is little research as to the influence of clinical factors on dentists' decision-making which may be of use when determining the impact of any change. An online survey relating to aspects of and attitudes to the use of direct restorative materials was distributed to all dentists who were members of the Australian Dental Association and/or members or fellows of the Royal Australasian College of Dental Surgeons. Data were statistically analysed. There were 408 respondents to the survey. Eighty-seven per cent of respondents (strongly) disagreed that amalgam was a technically more difficult material to place compared with resin composite, 82% (strongly) disagreed that placement time for amalgam was longer than that for resin composite and 69% (strongly) disagreed that amalgam was more difficult to finish than resin composite. Eighty-three per cent of respondents stated they were confident in their ability to place amalgam restorations. Where physical properties were of importance, indirect restorations were preferred (e.g. parafunction) 54%. The factors considered most important when choosing a direct restorative material included moisture control and aesthetics; least important factors were cost and time to place. There is consensus that amalgam is not more technically difficult to use, place or finish than resin composite and vice versa. There is recognition that both amalgam and resin composite have limitations in terms of physical properties. When choosing a direct restorative material, clinical factors considered to be of greatest importance are moisture control, aesthetics and the need to apply minimally invasive approaches. There is little difference in the opinions of users and non-users of amalgam with respect to these findings. © 2017 Australian Dental Association.

Looking Back, Moving Forward: Technical, Normative, and Political Dimensions of School Discipline

ERIC Educational Resources Information Center

Wiley, Kathryn E.; Anyon, Yolanda; Yang, Jessica L.; Pauline, Malina E.; Rosch, Alyssa; Valladares, Giovana; Downing, Barbara J.; Pisciotta, Lisa

2018-01-01

Purpose: School discipline reformers have presumed that such work is largely a technical task, emphasizing discrete changes to discipline policies and protocols. Yet prior theory and research suggest that emphasizing technical changes may overlook additional and important aspects of reform, namely, the normative and political dimensions within…

What is technical writing? Prolegomenon to a contextual definition

NASA Technical Reports Server (NTRS)

Barton, B. F.; Barton, M. S.

1981-01-01

The question, "What is Technical Writing?", is addressed. Interest about the stance a teacher assumes in a classroom, the orientation of textbooks, and the shape of curricula are considered. Technical writing is considered of age, definitions abound and the time is ripe for a metaperspective on the question. This analyzes pitfalls in representative definitions of technical writing suggest a direction for future inquiry.

What effects have resident work-hour changes had on education, quality of life, and safety? A systematic review.

PubMed

Harris, Joshua D; Staheli, Greg; LeClere, Lance; Andersone, Diana; McCormick, Frank

2015-05-01

More than 15 years ago, the Institute of Medicine (IOM) identified medical error as a problem worthy of greater attention; in the wake of the IOM report, numerous changes were made to regulations to limit residents' duty hours. However, the effect of resident work-hour changes remains controversial within the field of orthopaedics. We performed a systematic review to determine whether work-hour restrictions have measurably influenced quality-of-life measures, operative and technical skill development, resident surgical education, patient care outcomes (including mortality, morbidity, adverse events, sentinel events, complications), and surgeon and resident attitudes (such as perceived effect on learning and training experiences, personal benefit, direct clinical experience, clinical preparedness). We performed a systematic review of PubMed, Scopus, CINAHL (Cumulative Index to Nursing and Allied Health Literature), and Google Scholar using PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Inclusion criteria were any English language peer-reviewed articles that analyzed the effect(s) of orthopaedic surgery resident work-hour restrictions on patient safety, resident education, resident/surgeon quality of life, resident technical operative skill development, and resident surgeon attitudes toward work-hour restrictions. Eleven studies met study inclusion criteria. One study was a prospective analysis, whereas 10 studies were of level IV evidence (review of surgical case logs) or survey results. Within our identified studies, there was some support for improved resident quality of life, improved resident sleep and less fatigue, a perceived negative impact on surgical operative and technical skill, and conflicting evidence on the topic of resident education, patient outcomes, and variable attitudes toward the work-hour changes. There is a paucity of high-level or clear evidence evaluating the effect of the changes to resident work hours. Future research in this area should focus on objective measures that include patient safety as a primary outcome.

25 CFR 1200.40 - How will the Department provide technical assistance for tribes?

Code of Federal Regulations, 2013 CFR

2013-04-01

... tribes? 1200.40 Section 1200.40 Indians OFFICE OF THE SPECIAL TRUSTEE FOR AMERICAN INDIANS, DEPARTMENT OF... the Department provide technical assistance for tribes? (a) We will provide direct or contract technical assistance, in accordance with appropriations availability to tribes for developing, implementing...

78 FR 11947 - 60-Day Notice of Proposed Information Collection: Directorate of Defense Trade Controls...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

...: Directorate of Defense Trade Controls Information Collection: Export Declaration of Defense Technical Data or... . SUPPLEMENTARY INFORMATION: Title of Information Collection: Export Declaration of Defense Technical Data or... collection: Actual export of defense technical data and defense services must be reported directly to the...

48 CFR 742.1170-4 - Progress reporting requirements and contract clause.

Code of Federal Regulations, 2010 CFR

2010-10-01

... progress. (b) Because the cognizant technical officer is the individual most familiar with the contractor's performance, the contractor must submit the progress reports directly to the cognizant technical officer. The cognizant technical officer must review the reports and advise the contracting officer, in writing, of any...

The effects of an enrichment training program for youth football attackers

PubMed Central

Santos, Sara; Gonçalves, Bruno; Travassos, Bruno; Wong, Del P.; Schöllhorn, Wolfgang; Sampaio, Jaime

2018-01-01

The aim of this study was to identify the effects of a complementary training program based on differential learning approach in the physical, technical, creative and positioning performance of youth football attackers. Fifteen players were allocated into the control (U15C = 9, age: 13.9±0.5 years; U17C = 6, age: 16.1±0.7 years) and the experimental (U15E = 9, age: 14.2±0.8 years; U17E = 6, age: 15.8±0.5 years) groups. The experimental groups participated in 10-weeks of a complementary training program based on differential learning approach to improve physical literacy and players’ tactical behavior. Variables studied encompassed: motor (vertical jump, speed and repeated change-of direction), technical (pass, dribble and shot), creative (fluency, attempts, versatility) and positioning-related variables (stretch index, spatial exploration index and regularity of the lateral and longitudinal movements). Results revealed that U15E improved both the jump and repeated change-of-direction performance, while the U17E have only improved the jump performance. The U15E showed improvements in all technical variables (small to large effects), and in the fluency and versatility (moderate effects), while the U17 have only improved the successful shots (large effects). From a positional perspective, there was a moderate increase in the stretch index, and decreased longitudinal and lateral regularity (small to moderate effects) in the U15E compared to the U15C. In turn, the U17E revealed a moderate increase of the spatial exploration index and a small decrease in the stretch index. Overall, the results suggest that the complementary training program was effective for the development of the overall performance of the U15E attackers, while more time and/or variability may be needed for older age groups. Nevertheless, the overall higher values found in experimental groups, may suggest that this type of complementary training program improves performance. PMID:29897985

Six weeks of β-alanine supplementation did not enhance repeated-sprint ability or technical performances in young elite basketball players.

PubMed

Milioni, Fabio; Redkva, Paulo E; Barbieri, Fabio A; Zagatto, Alessandro M

2017-06-01

Supplementation with β-alanine plays an important role as a precursor of carnosine, the most effective intramuscular buffer, and has been seen as a potential ergogenic aid, especially for high-intensity modalities such as basketball. Thus, the aim of the present study was to investigate the effects of 6 weeks of β-alanine supplementation on repeated sprint ability (RSA) and technical performances in young elite Brazilian basketball players. In total, 27 young basketball players (17±1 years) were randomized into a β-alanine group (Gβ - 6.4 g day -1 of β-alanine) and a placebo group (GP - 6.4 g day -1 of dextrose). Before and after the supplementation period the athletes performed a RSA test composed of ten 30 m sprints with two 180° changes of direction interspaced by 30 s of recovery. During the recovery period (i.e., after the sprints) the athletes performed a countermovement jump (CMJ) and a set of three free throws. After 48 h they performed a Yo-Yo intermittent recovery test level 1 (Yo-Yo IR1). Both groups increased the distance covered in the Yo-Yo IR1 after the supplementation period ( p = 0.001). On the other hand, both groups presented impairment in RSA time-performance (total time, best time, and mean time, p ≤ 0.04), while no significant changes were observed for technical task performances (i.e., CMJ and free throws) ( p ≥ 0.07). No between-group interactions were observed for any variable measured ( p ≥ 0.31). Thus, 6 weeks of β-alanine supplementation did not improve RSA or technical performances in young elite basketball players.

Split WHO in two: strengthening political decision-making and securing independent scientific advice.

PubMed

Hoffman, Steven J; Røttingen, John-Arne

2014-02-01

The World Health Organization (WHO) has never fulfilled its original mission of simultaneously serving as the world's pre-eminent public health authority and intergovernmental platform for global health negotiations. While WHO's secretariat works hard to fulfill both functions, it is undermined by an institutional design that mixes technical and political mandates. This forces staff to walk uncomfortably along many fine lines: advising but never directing; guiding but never governing; leading but never advocating; evaluating but never judging. The result is mediocrity on both fronts. Instead, WHO should be split in two, separating its technical and political stewardship functions into separate entities, with collaboration in areas of overlap. The Executive Board and secretariat would be bifurcated, with technical units reporting to a Technical Board and political units reporting to a Political Board. Both boards would report to the World Health Assembly where all member states would continue to provide ultimate oversight. Such bold changes can be implemented either by revising WHO's constitution or through simpler mechanisms. Either way, structural governance reforms would need to be accompanied by complementary changes in culture that support strengthened political decision-making and scientific independence. States' inability to act on WHO's institutional design challenges will only lead them and non-state actors to continue bypassing the organization through the creation of new entities as they have done over the last 15 years. The key will be to mobilize those advocates and decision-makers who have the audacity to demand more from WHO and convince member states to elevate their ambitions in current WHO reform efforts. Continued progress in global health depends on it. Copyright © 2013 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Multichannel intraluminal impedance: general principles and technical issues.

PubMed

Tutuian, Radu; Castell, Donald O

2005-04-01

Multichannel intraluminal impedance (MII) is a new technology that allows detection of bolus movement without the use of external radiation or radiolabeled substances. The principles of MII are based on changes in resistance to alternating electrical current (impedance) induced by the presence of various boluses within the esophagus. The timing of changes in multiple impedance-measuring segments in the esophagus allows determination of the direction of bolus movement. Combined MII and manometry (MII-EM) provides simultaneous information on intraesophageal pressures and bolus transit, offers the ability to monitor all types of reflux, and allows the detection of the physical (liquid, gas, or mixed) and chemical (acid, nonacid) characteristics of the gastroesophageal refluxate.

KSC-04PD-1127

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- A KSC employee asks a question of the panel conducting the Culture Change Process All Hands Meeting in the Training Auditorium. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Panel members included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at the Johnson Space Center.

KSC-04PD-1122

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- The panel members participating in the Culture Change Process All Hands Meeting entertain questions and comments from the audience assembled in the Training Auditorium. From left, they are James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision.

KSC-04PD-1121

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- The panel members participating in the Culture Change Process All Hands Meeting entertain questions and comments from the audience assembled in the Training Auditorium. From left, they are James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision.

KSC-04pd1122

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- The panel members participating in the Culture Change Process All Hands Meeting entertain questions and comments from the audience assembled in the Training Auditorium. From left, they are James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision.

KSC-04pd1121

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- The panel members participating in the Culture Change Process All Hands Meeting entertain questions and comments from the audience assembled in the Training Auditorium. From left, they are James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision.

Geothermal direct-heat utilization assistance. Quarterly report, January - March 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lienau, P.

1997-04-01

This report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the second quarter of FY-97. It describes 176 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment, economics and resources. Research activities are summarized on well pumping in commercial groundwater heat pump systems. A memorandum of understanding between the GHC and EIA is described. Work accomplishments on the Guidebook are discussed. Outreach activities include the publication of a geothermal direct usemore » Bulletin, dissemination of information, geothermal library, technical papers and seminars, and progress monitor reports on geothermal resources and utilization.« less

The National Early Childhood Technical Assistance Center Model for Long-Term Systems Change

ERIC Educational Resources Information Center

Kahn, Lynne; Hurth, Joicey; Kasprzak, Christina M.; Diefendorf, Martha J.; Goode, Susan E.; Ringwalt, Sharon S.

2009-01-01

The National Early Childhood Technical Assistance Center was charged by the U.S. Department of Education's Office of Special Education Programs from October 2001 through September 2006 to develop, implement, and evaluate an approach to technical assistance (TA) that would result in sustainable systems change in state early intervention and…

Rethinking Technical Communication Pedagogy: A Poststructuralist View of Program and Course Design.

ERIC Educational Resources Information Center

Woolever, Kristin R.

Technical communication specialists today really have to be technology experts as well as effective writers--even their titles have changed to "information designers, information engineers, or document developers." Teachers of technical communication should be up to date in the classroom to meet the changing needs of the workplace.…

A Question of Trust: Predictive Conditions for Adaptive and Technical Leadership in Educational Contexts

ERIC Educational Resources Information Center

Daly, Alan J.; Chrispeels, Janet

2008-01-01

Recent studies have suggested that educational leaders enacting a balance of technical and adaptive leadership have an effect on increasing student achievement. Technical leadership focuses on problem-solving or first-order changes within existing structures and paradigms. Adaptive leadership involves deep or second-order changes that alter…

The effects of active (hot-seat) versus observer roles during simulation-based training on stress levels and non-technical performance: a randomized trial.

PubMed

Bong, Choon Looi; Lee, Sumin; Ng, Agnes Suah Bwee; Allen, John Carson; Lim, Evangeline Hua Ling; Vidyarthi, Arpana

2017-01-01

Active 'hands-on' participation in the 'hot-seat' during immersive simulation-based training (SBT) induces stress for participants, which is believed to be necessary to improve performance. We hypothesized that observers of SBT can subsequently achieve an equivalent level of non-technical performance as 'hot-seat' participants despite experiencing lower stress. We randomized 37 anaesthesia trainees into two groups to undergo three consecutive SBT scenarios. Eighteen 'hot-seat' trainees actively participated in all three scenarios, and 19 'observer' trainees were directed to observe the first two scenarios and participated in the 'hot-seat' only in scenario 3. Salivary cortisol (SC) was measured at four time points during each scenario. Primary endpoint for stress response was the change in SC (ΔSC) from baseline. Performance was measured using the Anaesthetist's Non-Technical Skills (ANTS) Score. Mean SC increased in all participants whenever they were in the 'hot-seat' role, but not when in the observer role. Hot-seat ΔSC (mcg/dL) for scenarios 1, 2, and 3 were 0.122 ( p  = 0.001), 0.074 ( p  = 0.047), and 0.085 ( p  = 0.023), respectively. Observers ΔSC (mcg/dL) for scenarios 1, 2, and 3 were -0.062 ( p  = 0.091), 0.010 ( p  = 0.780), and 0.144 ( p  = 0.001), respectively. Mean ANTS scores were equivalent between the 'hot-seat' (40.0) and 'observer' (39.4) groups in scenario 3 ( p  = 0.733). Observers of SBT achieved an equivalent level of non-technical performance, while experiencing lower stress than trainees repeatedly trained in the 'hot-seat'. Our findings suggest that directed observers may benefit from immersive SBT even without repeated 'hands-on' experience and stress in the hot-seat. The directed observer role may offer a less stressful, practical alternative to the traditional 'hot-seat' role, potentially rendering SBT accessible to a wider audience. ClinicalTrials.gov Identifier NCT02211378, registered August 5, 2014, retrospectively registered.

The coevolution of innovation and technical intelligence in primates

PubMed Central

Street, Sally E.; Whalen, Andrew; Laland, Kevin N.

2016-01-01

In birds and primates, the frequency of behavioural innovation has been shown to covary with absolute and relative brain size, leading to the suggestion that large brains allow animals to innovate, and/or that selection for innovativeness, together with social learning, may have driven brain enlargement. We examined the relationship between primate brain size and both technical (i.e. tool using) and non-technical innovation, deploying a combination of phylogenetically informed regression and exploratory causal graph analyses. Regression analyses revealed that absolute and relative brain size correlated positively with technical innovation, and exhibited consistently weaker, but still positive, relationships with non-technical innovation. These findings mirror similar results in birds. Our exploratory causal graph analyses suggested that technical innovation shares strong direct relationships with brain size, body size, social learning rate and social group size, whereas non-technical innovation did not exhibit a direct relationship with brain size. Nonetheless, non-technical innovation was linked to brain size indirectly via diet and life-history variables. Our findings support ‘technical intelligence’ hypotheses in linking technical innovation to encephalization in the restricted set of primate lineages where technical innovation has been reported. Our findings also provide support for a broad co-evolving complex of brain, behaviour, life-history, social and dietary variables, providing secondary support for social and ecological intelligence hypotheses. The ability to gain access to difficult-to-extract, but potentially nutrient-rich, resources through tool use may have conferred on some primates adaptive advantages, leading to selection for brain circuitry that underlies technical proficiency. PMID:26926276

The coevolution of innovation and technical intelligence in primates.

PubMed

Navarrete, Ana F; Reader, Simon M; Street, Sally E; Whalen, Andrew; Laland, Kevin N

2016-03-19

In birds and primates, the frequency of behavioural innovation has been shown to covary with absolute and relative brain size, leading to the suggestion that large brains allow animals to innovate, and/or that selection for innovativeness, together with social learning, may have driven brain enlargement. We examined the relationship between primate brain size and both technical (i.e. tool using) and non-technical innovation, deploying a combination of phylogenetically informed regression and exploratory causal graph analyses. Regression analyses revealed that absolute and relative brain size correlated positively with technical innovation, and exhibited consistently weaker, but still positive, relationships with non-technical innovation. These findings mirror similar results in birds. Our exploratory causal graph analyses suggested that technical innovation shares strong direct relationships with brain size, body size, social learning rate and social group size, whereas non-technical innovation did not exhibit a direct relationship with brain size. Nonetheless, non-technical innovation was linked to brain size indirectly via diet and life-history variables. Our findings support 'technical intelligence' hypotheses in linking technical innovation to encephalization in the restricted set of primate lineages where technical innovation has been reported. Our findings also provide support for a broad co-evolving complex of brain, behaviour, life-history, social and dietary variables, providing secondary support for social and ecological intelligence hypotheses. The ability to gain access to difficult-to-extract, but potentially nutrient-rich, resources through tool use may have conferred on some primates adaptive advantages, leading to selection for brain circuitry that underlies technical proficiency. © 2016 The Author(s).

Designing for Change: Interoperability in a scaling and adapting environment

NASA Astrophysics Data System (ADS)

Yarmey, L.

2015-12-01

The Earth Science cyberinfrastructure landscape is constantly changing. Technologies advance and technical implementations are refined or replaced. Data types, volumes, packaging, and use cases evolve. Scientific requirements emerge and mature. Standards shift while systems scale and adapt. In this complex and dynamic environment, interoperability remains a critical component of successful cyberinfrastructure. Through the resource- and priority-driven iterations on systems, interfaces, and content, questions fundamental to stable and useful Earth Science cyberinfrastructure arise. For instance, how are sociotechnical changes planned, tracked, and communicated? How should operational stability balance against 'new and shiny'? How can ongoing maintenance and mitigation of technical debt be managed in an often short-term resource environment? The Arctic Data Explorer is a metadata brokering application developed to enable discovery of international, interdisciplinary Arctic data across distributed repositories. Completely dependent on interoperable third party systems, the Arctic Data Explorer publicly launched in 2013 with an original 3000+ data records from four Arctic repositories. Since then the search has scaled to 25,000+ data records from thirteen repositories at the time of writing. In the final months of original project funding, priorities shift to lean operations with a strategic eye on the future. Here we present lessons learned from four years of Arctic Data Explorer design, development, communication, and maintenance work along with remaining questions and potential directions.

Hanford Technical Basis for Multiple Dosimetry Effective Dose Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hill, Robin L.; Rathbone, Bruce A.

2010-08-01

The current method at Hanford for dealing with the results from multiple dosimeters worn during non-uniform irradiation is to use a compartmentalization method to calculate the effective dose (E). The method, as documented in the current version of Section 6.9.3 in the 'Hanford External Dosimetry Technical Basis Manual, PNL-MA-842,' is based on the compartmentalization method presented in the 1997 ANSI/HPS N13.41 standard, 'Criteria for Performing Multiple Dosimetry.' With the adoption of the ICRP 60 methodology in the 2007 revision to 10 CFR 835 came changes that have a direct affect on the compartmentalization method described in the 1997 ANSI/HPS N13.41more » standard, and, thus, to the method used at Hanford. The ANSI/HPS N13.41 standard committee is in the process of updating the standard, but the changes to the standard have not yet been approved. And, the drafts of the revision of the standard tend to align more with ICRP 60 than with the changes specified in the 2007 revision to 10 CFR 835. Therefore, a revised method for calculating effective dose from non-uniform external irradiation using a compartmental method was developed using the tissue weighting factors and remainder organs specified in 10 CFR 835 (2007).« less

The variation in engine power with altitude determined from measurements in flight with a hub dynamometer

NASA Technical Reports Server (NTRS)

Gove, W D

1929-01-01

The rate of change in power of aircraft engines with altitude has been the subject of considerable discussion. Only a small amount of data from direct measurements of the power delivered by airplane engines during flight, however, has been published. This report presents the results of direct measurements of the power delivered by a Liberty 12 airplane engine taken with a hub dynamometer at standard altitudes from zero to 13,000 feet. Six flights were made with the engine installed in a modified DH-4 airplane. The experimental relation of brake horsepower to altitude is compared with two theoretical relations and with the experimental results, for a second Liberty 12 engine, given in NACA Technical Report no. 252. The rate of change in power with altitude of a third Liberty engine, measured with a calibrated propeller, is also given for comparison. The data presented substantiate the theoretical relation of brake horsepower to altitude based on the correction of ground level indicated horsepower for change in atmospheric temperature and pressure with the subsequent deduction of friction horsepower corrected for altitude. (author)

Integration of research advances in modelling and monitoring in support of WFD river basin management planning in the context of climate change.

PubMed

Quevauviller, Philippe; Barceló, Damia; Beniston, Martin; Djordjevic, Slobodan; Harding, Richard J; Iglesias, Ana; Ludwig, Ralf; Navarra, Antonio; Navarro Ortega, Alícia; Mark, Ole; Roson, Roberto; Sempere, Daniel; Stoffel, Markus; van Lanen, Henny A J; Werner, Micha

2012-12-01

The integration of scientific knowledge about possible climate change impacts on water resources has a direct implication on the way water policies are being implemented and evolving. This is particularly true regarding various technical steps embedded into the EU Water Framework Directive river basin management planning, such as risk characterisation, monitoring, design and implementation of action programmes and evaluation of the "good status" objective achievements (in 2015). The need to incorporate climate change considerations into the implementation of EU water policy is currently discussed with a wide range of experts and stakeholders at EU level. Research trends are also on-going, striving to support policy developments and examining how scientific findings and recommendations could be best taken on board by policy-makers and water managers within the forthcoming years. This paper provides a snapshot of policy discussions about climate change in the context of the WFD river basin management planning and specific advancements of related EU-funded research projects. Perspectives for strengthening links among the scientific and policy-making communities in this area are also highlighted. Copyright © 2012 Elsevier B.V. All rights reserved.

76 FR 33193 - Notice of Proposed Change to Section IV of the Virginia State Technical Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service Notice of Proposed Change to....S. Department of Agriculture. ACTION: Notice of Availability of proposed changes in the Virginia... Conservationist for Virginia that changes must be made in the NRCS State Technical Guide specifically in practice...

Engineering analysis activities in support of susquehanna unit 1 startup testing and cycle 1 operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, G.D.; Kukielka, C.A.; Olson, L.M.

The engineering analysis group is responsible for all nuclear plant systems analysis and reactor analysis activities, excluding fuel management analysis, at Pennsylvania Power and Light Company. These activities include making pretest and posttest predictions of startup tests; analyzing unplanned or unexpected transient events; providing technical training to plant personnel; assisting in the development of emergency drill scenarios; providing engineering evaluations to support design and technical specification changes, and evaluating, assessing, and resolving a number of license conditions. Many of these activities have required the direct use of RETRAN models. Two RETRAN analyses that were completed to support plant operations -more » a pretest analysis of the turbine trip startup test, and a posttest analysis of the loss of startup transformer event - are investigated. For each case, RETRAN results are compared with available plant data and comparisons are drawn on the acceptability of the performance of the plant systems.« less

Application of nonlinear ultrasonics to inspection of stainless steel for dry storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ulrich, Timothy James II; Anderson, Brain E.; Remillieux, Marcel C.

This report summarized technical work conducted by LANL staff an international collaborators in support of the UFD Storage Experimentation effort. The focus of the current technical work is on the detection and imaging of a failure mechanism known as stress corrosion cracking (SCC) in stainless steel using the nonlinear ultrasonic technique known as TREND. One of the difficulties faced in previous work is in finding samples that contain realistically sized SCC. This year such samples were obtained from EPRI. Reported here are measurements made on these samples. One of the key findings is the ability to detect subsurface changes tomore » the direction in which a crack is penetrating into the sample. This result follows from last year's report that demonstrated the ability of TREND techniques to image features below the sample surface. A new collaboration was established with AGH University of Science and Technology, Krakow, Poland.« less

Project T.E.A.M. (Technical Education Advancement Modules). Introduction to Industrial Physics.

ERIC Educational Resources Information Center

Whisenhunt, James E.

This instructional guide, one of a series developed by the Technical Education Advancement Modules (TEAM) project, is a 20-hour introduction to industrial physics that explains and demonstrates to industrial maintenance mechanics the direct relationship of physics to machinery. Project TEAM is intended to upgrade basic technical competencies of…

75 FR 16817 - Meeting for Software Developers on the Technical Specifications for Common Formats for Patient...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-02

... Software Developers on the Technical Specifications for Common Formats for Patient Safety Data Collection... software developers can provide input on these technical specifications for the Common Formats Version 1.1... specifications, which provide direction to software developers that plan to implement the Common Formats...

SolSmart Launches to Support Local Governments | State, Local, and Tribal

Science.gov Websites

Local Governments May 04, 2016 by Erin Nobler As a member of the Solar Technical Assistance Team (STAT ) network, the National Renewable Energy Laboratory (NREL) provides direct technical assistance to state and no-cost technical assistance. Business processes or administrative costs, the so-called "soft

Technical Writing 1987: Galloping Off in at Least Two Directions.

ERIC Educational Resources Information Center

Stohrer, Freda F.

Technical writing instructors generally agree about the absolute need for communication skills throughout the technological work place, but a survey of technical writing journal articles shows a lack of focus on ways to address business's needs for on-the-job literacy. One major advance within the profession in recent years has been the…

Technical and Vocational Education Transformation in Malaysia: Shaping the Future Leaders

ERIC Educational Resources Information Center

Sauffie, Nur Fatin Binti Mohd

2015-01-01

In accordance with the concept of lifelong education, the Technical and Vocational Education (TVE) system is one flaw of that is recognized or known as a system whose role is to develop individuals with high technical skills as desired by the industry nowadays. Changing times and technology development at this time require changes to the TVET…

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

Crew resource management training in the intensive care unit. A multisite controlled before-after study.

PubMed

Kemper, Peter F; de Bruijne, Martine; van Dyck, Cathy; So, Ralph L; Tangkau, Peter; Wagner, Cordula

2016-08-01

There is a growing awareness today that adverse events in the intensive care unit (ICU) are more often caused by problems related to non-technical skills than by a lack of technical, or clinical, expertise. Team training, such as crew resource management (CRM), aims to improve these non-technical skills. The present study evaluated the effectiveness of CRM in the ICU. Six ICUs participated in a paired controlled trial, with one pretest and two post-test measurements (after 3 and 12 months). Three ICUs received CRM training and were compared with a matched control unit. The 2-day classroom-based training was delivered to multidisciplinary groups (ie, ICU physicians, nurses, managers). All levels of Kirkpatrick's evaluation framework were assessed using a mixed method design, including questionnaires, observations and routinely administered patient outcome data. Level I-reaction: participants were very positive directly after the training. Level II-learning: attitudes towards behaviour aimed at optimising situational awareness were relatively high at baseline and remained stable. Level III-behaviour: self-reported behaviour aimed at optimising situational awareness improved in the intervention group. No changes were found in observed explicit professional oral communication. Level IV-organisation: patient outcomes were unaffected. Error management culture and job satisfaction improved in the intervention group. Patient safety culture improved in both control and intervention units. We can conclude that CRM, as delivered in the present study, does not change behaviour or patient outcomes by itself, yet changes how participants think about errors and risks. This indicates that CRM requires a combination with other initiatives in order to improve clinical outcomes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

High-speed atomic force microscopy coming of age

NASA Astrophysics Data System (ADS)

Ando, Toshio

2012-02-01

High-speed atomic force microscopy (HS-AFM) is now materialized. It allows direct visualization of dynamic structural changes and dynamic processes of functioning biological molecules in physiological solutions, at high spatiotemporal resolution. Dynamic molecular events unselectively appear in detail in an AFM movie, facilitating our understanding of how biological molecules operate to function. This review describes a historical overview of technical development towards HS-AFM, summarizes elementary devices and techniques used in the current HS-AFM, and then highlights recent imaging studies. Finally, future challenges of HS-AFM studies are briefly discussed.

Did state renewable portfolio standards induce technical change in methane mitigation in the U.S. landfill sector?

NASA Astrophysics Data System (ADS)

Delhotal, Katherine Casey

Landfill gas (LFG) projects use the gas created from decomposing waste, which is approximately 49% methane, and substitute it for natural gas in engines, boilers, turbines, and other technologies to produce energy or heat. The projects are beneficial in terms of increased safety at the landfill, production of a cost-effective source of energy or heat, reduced odor, reduced air pollution emissions, and reduced greenhouse gas emissions. However, landfills sometimes face conflicting policy incentives. The theory of technical change shows that the diffusion of a technology or groups of technologies increases slowly in the beginning and then picks up speed as knowledge and better understanding of using the technology diffuses among potential users. Using duration analysis, data on energy prices, State and Federal policies related to landfill gas, renewable energy, and air pollution, as well as control data on landfill characteristics, I estimate the influence and direction of influence of renewable portfolio standards (RPS). The analysis found that RPS positively influences the diffusion of landfill gas technologies, encouraging landfills to consider electricity generation projects over direct sales of LFG to another facility. Energy price increases or increased revenues for a project are also critical. Barriers to diffusion include air emission permits in non-attainment areas and policies, such as net metering, which promote other renewables over LFG projects. Using the estimates from the diffusion equations, I analyze the potential influence of a Federal RPS as well as the potential interaction with a Federal, market based climate change policy, which will increase the revenue of a project through higher energy sale prices. My analysis shows that a market based climate change policy such as a cap-and-trade or carbon tax scheme would increase the number of landfill gas projects significantly more than a Federal RPS.

Supply side management innovation: —Analysis on Enterprises in Scientific Industry Park Based on Market Orientation

NASA Astrophysics Data System (ADS)

Li, Xing; Mao, Fenlan; Lin, Mian; Yadi, Nan

2017-12-01

This research presents a conceptual framework for incorporating organizational learning and innovations as the mediating variables between market orientation and organizational performance. The samples of this study include 145 companies from the information technology industry in the Scientific Industry Parks. The global model fit is acceptable. This empirical result supports the constructs mentioned above. 1. Market orientation has a positive and direct impact on organizational learning, administrative and technical innovation. 2. Organizational learning has a positive and direct impact on administrative and technical innovation, but with no statistically significant direct impact on performance. 3. Organizational learning does have a positive and indirect impact on performance by means of organizational innovations. 4. It is not statistically significant that the impact of the two innovation types (both administrative and technical) interact with each other.

49 CFR 20.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 311.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1158.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 311.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.23 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

49 CFR 20.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1158.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

7 CFR 3018.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 138.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 311.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1158.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1168.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

10 CFR 601.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 227.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

34 CFR 82.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

20 CFR 438.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 519.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

NEET-AMM Final Technical Report on Laser Direct Manufacturing (LDM) for Nuclear Power Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Scott; Baca, Georgina; O'Connor, Michael

2015-12-31

Final technical report summarizes the program progress and technical accomplishments of the Laser Direct Manufacturing (LDM) for Nuclear Power Components project. A series of experiments varying build process parameters (scan speed and laser power) were conducted at the outset to establish the optimal build conditions for each of the alloys. Fabrication was completed in collaboration with Quad City Manufacturing Laboratory (QCML). The density of all sample specimens was measured and compared to literature values. Optimal build process conditions giving fabricated part densities close to literature values were chosen for making mechanical test coupons. Test coupons whose principal axis is onmore » the x-y plane (perpendicular to build direction) and on the z plane (parallel to build direction) were built and tested as part of the experimental build matrix to understand the impact of the anisotropic nature of the process.. Investigations are described 316L SS, Inconel 600, 718 and 800 and oxide dispersion strengthed 316L SS (Yttria) alloys.« less

Performance/Design Requirements and Detailed Technical Description for a Computer-Directed Training Subsystem for Integration into the Air Force Phase II Base Level System.

ERIC Educational Resources Information Center

Butler, A. K.; And Others

The performance/design requirements and a detailed technical description for a Computer-Directed Training Subsystem to be integrated into the Air Force Phase II Base Level System are described. The subsystem may be used for computer-assisted lesson construction and has presentation capability for on-the-job training for data automation, staff, and…

43 CFR 18.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

13 CFR 146.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 604.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

18 CFR 1315.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

18 CFR 1315.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

45 CFR 604.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

13 CFR 146.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

31 CFR 21.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

18 CFR 1315.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 712.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

40 CFR 34.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 712.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

40 CFR 34.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

31 CFR 21.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

14 CFR 1271.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

31 CFR 21.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 604.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

43 CFR 18.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

14 CFR 1271.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

40 CFR 34.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

15 CFR 28.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

18 CFR 1315.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

28 CFR 69.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

45 CFR 1158.300 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

13 CFR 146.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

6 CFR 9.15 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

22 CFR 712.205 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-04-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.205 - Professional and technical services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

45 CFR 93.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

13 CFR 146.300 - Professional and technical services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... services shall be limited to advice and analysis directly applying any professional or technical discipline... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

14 CFR 1271.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

12 CFR 411.300 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

31 CFR 21.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-07-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

13 CFR 146.205 - Professional and technical services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

Direct Final Rule for Technical Amendments for Marine Spark-Ignition Engines and Vessels

EPA Pesticide Factsheets

Rule published September 16, 2010 to make technical amendments to the design standard for portable marine fuel tanks. This rule incorporates safe recommended practices, developed through industry consensus.

77 FR 74658 - Texas Eastern Transmission, LP; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-17

...-captioned proceeding \\1\\ directed that a technical conference be held to address issues raised by Texas... adjustments. \\1\\ Texas Eastern Transmission, LP, 141 FERC ]61,172 (2012). Take notice that a technical conference will be held on Tuesday, January 15, 2013 at 9:30 a.m., in a room to be designated at the offices...

Comparison of occupational exposure to carbon disulphide in a viscose rayon factory before and after technical adjustments.

PubMed

Bulat, Petar; Daemen, Edgard; Van Risseghem, Marleen; De Bacquer, Dirk; Tan, Xiaodong; Braeckman, Lutgart; Vanhoorne, Michel

2002-01-01

The objective of this follow-up study was to verify the efficacy of the technical adjustments gradually introduced in departments of a viscose rayon factory from 1989 onward. Personal exposure to carbon disulphide was assessed by means of personal monitoring through active sampling. Six job titles in three departments of the factory were sampled. Geometric means were calculated and used as estimates of time-weighted average (TWA) concentrations. The results from the present study were compared with similar measurements from a previous study in the same factory. Due to organizational changes, only three job titles (spinner, first spinner, and viscose preparator) could be compared directly. Two new job titles were identified, although tasks performed in these two job titles already existed. The measurements from one job title could not be compared, due to a substantial reorganization and automation of the tasks carried out in the department. The comparison before and after technical improvements shows that personal exposure of spinner and first spinner has been substantially reduced. Even the geometric means of measurements outside the fresh air mask are below the TWA-TLV (Threshold Limit Value). Despite the difficulties in comparing the results from the two studies, it is concluded that the technical measures reduced up to tenfold personal exposure to carbon disulphide and personal protection reduced it further by a factor two.

Technical and Non-Technical Measures for air pollution emission reduction: The integrated assessment of the regional Air Quality Management Plans through the Italian national model

NASA Astrophysics Data System (ADS)

D'Elia, I.; Bencardino, M.; Ciancarella, L.; Contaldi, M.; Vialetto, G.

2009-12-01

The Italian Air Quality legislation underwent sweeping changes with the implementation of the 1996 European Air Quality Framework Directive when the Italian administrative Regions were entrusted with air quality management tasks. The most recent Regional Air Quality Management Plans (AQMPs) highlighted the importance of Non-Technical Measures (NTMs), in addition to Technical Measures (TMs), in meeting environmental targets. The aim of the present work is to compile a list of all the TMs and NTMs taken into account in the Italian Regional AQMPs and to give in the target year, 2010, an estimation of SO 2, NO x and PM 10 emission reductions, of PM 10 concentration and of the health impact of PM 2.5 concentrations in terms of Life Expectancy Reduction. In order to do that, RAINS-Italy, as part of the National Integrated Modeling system for International Negotiation on atmospheric pollution (MINNI), has been applied. The management of TMs and NTMs inside RAINS have often obliged both the introduction of exogenous driving force scenarios and the control strategy modification. This has inspired a revision of the many NTM definitions and a clear choice of the definition adopted. It was finally highlighted that only few TMs and NTMs implemented in the AQMPs represent effective measures in reaching the environmental targets.

Health information technology vendor selection strategies and total factor productivity.

PubMed

Ford, Eric W; Huerta, Timothy R; Menachemi, Nir; Thompson, Mark A; Yu, Feliciano

2013-01-01

The aim of this study was to compare health information technology (HIT) adoption strategies' relative performance on hospital-level productivity measures. The American Hospital Association's Annual Survey and Healthcare Information and Management Systems Society Analytics for fiscal years 2002 through 2007 were used for this study. A two-stage approach is employed. First, a Malmquist model is specified to calculate hospital-level productivity measures. A logistic regression model is then estimated to compare the three HIT adoption strategies' relative performance on the newly constructed productivity measures. The HIT vendor selection strategy impacts the amount of technological change required of an organization but does not appear to have either a positive or adverse impact on technical efficiency or total factor productivity. The higher levels in technological change experienced by hospitals using the best of breed and best of suite HIT vendor selection strategies may have a more direct impact on the organization early on in the process. However, these gains did not appear to translate into either increased technical efficiency or total factor productivity during the period studied. Over a longer period, one HIT vendor selection strategy may yet prove to be more effective at improving efficiency and productivity.

Method of identification of patent trends based on descriptions of technical functions

NASA Astrophysics Data System (ADS)

Korobkin, D. M.; Fomenkov, S. A.; Golovanchikov, A. B.

2018-05-01

The use of the global patent space to determine the scientific and technological priorities for the technical systems development (identifying patent trends) allows one to forecast the direction of the technical systems development and, accordingly, select patents of priority technical subjects as a source for updating the technical functions database and physical effects database. The authors propose an original method that uses as trend terms not individual unigrams or n-gram (usually for existing methods and systems), but structured descriptions of technical functions in the form “Subject-Action-Object” (SAO), which in the authors’ opinion are the basis of the invention.

Justification of directions of technological and price audit systems changes for the purpose of high-rise construction innovating

NASA Astrophysics Data System (ADS)

Rogacheva, Yana; Panenkov, Andrey; Petrikova, Zinaida; Nezhnikova, Ekaterina

2018-03-01

Improving the quality of high-rise buildings under modern conditions should be based not only on compliance with the norms of technical regulations, but also on ensuring energy efficiency, environmental friendliness, and intellectuality, which can be achieved only through the introduction of innovations at all stages of the life cycle of the investment project. Authors of this article justified the need for a mechanism of technological and price audit of projects. They also suggested the model of life cycle of organizational and economic changes, connected with implantation of the mechanism of projects audit. They showed innovation character of ecological high-rise construction for the whole life cycle. Authors also made proposals to change the audit system for high-rise construction projects in the focus of its environmental friendliness.

14 CFR § 1271.205 - Professional and technical services.

Code of Federal Regulations, 2014 CFR

2014-01-01

...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

78 FR 77615 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... information identified in this proposed AD, contact Bombardier, Inc., Q-Series Technical Help Desk, 123... Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416-375-4000; fax...

KSC-04PD-1118

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- Bob Sieck, former Director of Space Shuttle Processing at KSC addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04PD-1126

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- Jim Jennings (left), Deputy Associate Administrator for Institutions and Asset Management, looks on as Lynn Cline, Deputy Associate Administrator for Space Flight, responds to a question asked by a member of the audience attending the Culture Change Process All Hands Meeting in the Training Auditorium. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other panel members were James W. Kennedy, KSC director; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center.

KSC-04PD-1117

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- Bob Sieck, former Director of Space Shuttle Processing at KSC addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04PD-1112

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- KSC employees assemble in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Panel members included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at the Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04PD-1111

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- Center Director James W. Kennedy addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04PD-1120

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; and Bob Sieck, former Director of Space Shuttle Processing at KSC. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04PD-1113

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- KSC employees assemble in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Panel members included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at the Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04PD-1115

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04PD-1116

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- Lynn Cline, Deputy Associate Administrator for Space Flight addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04PD-1114

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04PD-1110

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- Center Director James W. Kennedy addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04PD-1119

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agencys Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; and Bob Sieck, former Director of Space Shuttle Processing at KSC. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04pd1118

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- Bob Sieck, former Director of Space Shuttle Processing at KSC addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04pd1120

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; and Bob Sieck, former Director of Space Shuttle Processing at KSC. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04pd1115

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04pd1119

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; and Bob Sieck, former Director of Space Shuttle Processing at KSC. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04pd1113

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- KSC employees assemble in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Panel members included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at the Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04pd1114

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04pd1112

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- KSC employees assemble in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Panel members included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at the Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04pd1117

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- Bob Sieck, former Director of Space Shuttle Processing at KSC addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04pd1110

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- Center Director James W. Kennedy addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04pd1111

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- Center Director James W. Kennedy addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Lynn Cline, Deputy Associate Administrator for Space Flight; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

KSC-04pd1116

NASA Image and Video Library

2004-05-10

KENNEDY SPACE CENTER, FLA. -- Lynn Cline, Deputy Associate Administrator for Space Flight addresses KSC employees assembled in the Training Auditorium for a Culture Change Process All Hands Meeting. The purpose of the meeting was for employees to gain further insight into the Agency’s Vision for Space Exploration and the direction cultural change will take at KSC in order to assume its role within this vision. Other participants included James W. Kennedy, KSC director; Jim Jennings, Deputy Associate Administrator for Institutions and Asset Management; Bob Sieck, former Director of Space Shuttle Processing at KSC; and Jim Wetherbee, astronaut and Technical Assistant to the Director of Safety and Mission Assurance at Johnson Space Center. Following their remarks, members of the panel entertained questions and comments from the audience.

Vulnerability Assessments and Resilience Planning at Federal Sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moss, Richard H.; Blohm, Andrew; Delgado, Alison

2016-02-01

U.S. government agencies are now directed to assess the vulnerability of their operations and facilities to climate change and to develop adaptation plans to increase their resilience. Specific guidance on methods is still evolving based on the many different available frameworks. This technical paper synthesizes lessons and insights from a series of research case studies conducted by the investigators at facilities of the U.S. Departments of Energy and Defense. The paper provides a framework of steps for climate vulnerability assessments at Federal facilities and elaborates on three sets of methods required for assessments, regardless of the detailed framework used. Inmore » a concluding section, the paper suggests a roadmap to further develop methods to support agencies in preparing for climate change.« less

Efficient Methods to Assimilate Satellite Retrievals Based on Information Content. Part 2; Suboptimal Retrieval Assimilation

NASA Technical Reports Server (NTRS)

Joiner, J.; Dee, D. P.

1998-01-01

One of the outstanding problems in data assimilation has been and continues to be how best to utilize satellite data while balancing the tradeoff between accuracy and computational cost. A number of weather prediction centers have recently achieved remarkable success in improving their forecast skill by changing the method by which satellite data are assimilated into the forecast model from the traditional approach of assimilating retrievals to the direct assimilation of radiances in a variational framework. The operational implementation of such a substantial change in methodology involves a great number of technical details, e.g., pertaining to quality control procedures, systematic error correction techniques, and tuning of the statistical parameters in the analysis algorithm. Although there are clear theoretical advantages to the direct radiance assimilation approach, it is not obvious at all to what extent the improvements that have been obtained so far can be attributed to the change in methodology, or to various technical aspects of the implementation. The issue is of interest because retrieval assimilation retains many practical and logistical advantages which may become even more significant in the near future when increasingly high-volume data sources become available. The central question we address here is: how much improvement can we expect from assimilating radiances rather than retrievals, all other things being equal? We compare the two approaches in a simplified one-dimensional theoretical framework, in which problems related to quality control and systematic error correction are conveniently absent. By assuming a perfect radiative transfer model and perfect knowledge of radiance and background error covariances, we are able to formulate a nonlinear local error analysis for each assimilation method. Direct radiance assimilation is optimal in this idealized context, while the traditional method of assimilating retrievals is suboptimal because it ignores the cross-covariances between background errors and retrieval errors. We show that interactive retrieval assimilation (where the same background used for assimilation is also used in the retrieval step) is equivalent to direct assimilation of radiances with suboptimal analysis weights. We illustrate and extend these theoretical arguments with several one-dimensional assimilation experiments, where we estimate vertical atmospheric profiles using simulated data from both the High-resolution InfraRed Sounder 2 (HIRS2) and the future Atmospheric InfraRed Sounder (AIRS).

77 FR 12637 - Self-Regulatory Organizations; NYSE Amex LLC; Notice of Filing of Proposed Rule Change Amending...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-01

... Equities Definition of Approved Person To Exclude Foreign Affiliates, Eliminating the Application Process..., eliminate the application process for approved persons, and make related technical and conforming changes..., eliminate the application process for approved persons, and make related technical and conforming changes...

The Effect of Digital Publishing on Technical Services in University Libraries

ERIC Educational Resources Information Center

Hunter, Ben

2013-01-01

The past decade has brought enormous changes in scholarly communication, leading many libraries to undertake large-scale digital publishing initiatives. However, no study has investigated how technical services departments are changing to support these new services. Using change management as a theoretical framework, the investigator uses content…

Hydrogen turbine power conversion system assessment

NASA Technical Reports Server (NTRS)

Wright, D. E.; Lucci, A. D.; Campbell, J.; Lee, J. C.

1978-01-01

A three part technical study was conducted whereby parametric technical and economic feasibility data were developed on several power conversion systems suitable for the generation of central station electric power through the combustion of hydrogen and the use of the resulting heat energy in turbogenerator equipment. The study assessed potential applications of hydrogen-fueled power conversion systems and identified the three most promising candidates: (1) Ericsson Cycle, (2) gas turbine, and (3) direct steam injection system for fossil fuel as well as nuclear powerplants. A technical and economic evaluation was performed on the three systems from which the direct injection system (fossil fuel only) was selected for a preliminary conceptual design of an integrated hydrogen-fired power conversion system.

25 CFR 30.109 - Will the Secretary provide assistance in developing an alternative AYP definition?

Code of Federal Regulations, 2011 CFR

2011-04-01

... EDUCATION ADEQUATE YEARLY PROGRESS Defining Adequate Yearly Progress Technical Assistance § 30.109 Will the... Bureau, shall provide technical assistance either directly or through contract to the tribal governing...

25 CFR 30.109 - Will the Secretary provide assistance in developing an alternative AYP definition?

Code of Federal Regulations, 2010 CFR

2010-04-01

... EDUCATION ADEQUATE YEARLY PROGRESS Defining Adequate Yearly Progress Technical Assistance § 30.109 Will the... Bureau, shall provide technical assistance either directly or through contract to the tribal governing...

An Approach to the Reuse of Technical Materials for Educational Purposes

NASA Technical Reports Server (NTRS)

Levinstein, Irwin; Bryant, Wayne H. (Technical Monitor)

2001-01-01

This project addresses the problem of transforming technical documents intended for a technical audience into educational materials directed toward segments of the general public. In particular it addresses the conversion of technical material into Internet based educational materials. A major consideration of the project is the conservation of the time of subject matter experts in the organization in recognition of the fact that such experts are likely to be more valuable to the organization for purposes other than the production of educational outreach.

The Importance of Postural Control in Relation to Technical Abilities in Small-Sided Soccer Games

PubMed Central

Edis, Çağlar; Vurgun, Hikmet

2016-01-01

Abstract Making assessments regarding postural control and balance is very important for injury prevention in soccer. However, there has been no study that has associated postural control variables with branch-specific technical properties in a game. The aim of the present study was to determine the relationships between variables designating postural control levels and technical performance variables in different (1:1, 2:2 and 3:3) small-sided games (SSGs). Sixteen trained male amateur soccer players volunteered to take part in the study (age 17.2 ± 1.02 years, body height 176.25 ± 0.07 m, body mass 67.67 ± 13.27 kg). Following familiarization sessions, postural control was evaluated using one-leg and both-leg quiet-stance positions by measuring postural sway with a Tekscan HR Mat™ in anterior–posterior and medial–lateral directions. Later, 1:1, 2:2 and 3:3 SSGs were performed at two-day intervals and the technical variables specified for each game were analyzed. A Spearman’s rank-order correlation analysis demonstrated the relationship between postural control and soccer-specific technical variables in 1:1 (r-values ranging from 0.582 to 0.776), 2:2 (rvalues ranging from 0.511 to 0.740) and 3:3 (r-values ranging from 0.502 to 0.834) SSGs. In addition, a Wilcoxon signed rank test revealed differences between SSGs in terms of several variables. The results of the study showed that higher postural control levels are among the important variables that affect success in the performance of technical skills under rival pressure and suddenly changing conditions. Therefore, it is recommended that in addition to its use for injury prevention purposes, balance training should be conducted to improve branch-specific technical skills and to increase the levels of their successful performance in a game. PMID:28149410

The Importance of Postural Control in Relation to Technical Abilities in Small-Sided Soccer Games.

PubMed

Edis, Çağlar; Vural, Faik; Vurgun, Hikmet

2016-12-01

Making assessments regarding postural control and balance is very important for injury prevention in soccer. However, there has been no study that has associated postural control variables with branch-specific technical properties in a game. The aim of the present study was to determine the relationships between variables designating postural control levels and technical performance variables in different (1:1, 2:2 and 3:3) small-sided games (SSGs). Sixteen trained male amateur soccer players volunteered to take part in the study (age 17.2 ± 1.02 years, body height 176.25 ± 0.07 m, body mass 67.67 ± 13.27 kg). Following familiarization sessions, postural control was evaluated using one-leg and both-leg quiet-stance positions by measuring postural sway with a Tekscan HR Mat™ in anterior-posterior and medial-lateral directions. Later, 1:1, 2:2 and 3:3 SSGs were performed at two-day intervals and the technical variables specified for each game were analyzed. A Spearman's rank-order correlation analysis demonstrated the relationship between postural control and soccer-specific technical variables in 1:1 (r-values ranging from 0.582 to 0.776), 2:2 (rvalues ranging from 0.511 to 0.740) and 3:3 (r-values ranging from 0.502 to 0.834) SSGs. In addition, a Wilcoxon signed rank test revealed differences between SSGs in terms of several variables. The results of the study showed that higher postural control levels are among the important variables that affect success in the performance of technical skills under rival pressure and suddenly changing conditions. Therefore, it is recommended that in addition to its use for injury prevention purposes, balance training should be conducted to improve branch-specific technical skills and to increase the levels of their successful performance in a game.

A Training Partnership Focused on Climate Change Impact on Water Resources and Coastal Vulnerabilities

NASA Astrophysics Data System (ADS)

Abshire, W. E.; Brekke, L. D.; Arnold, J. R.

2015-12-01

Beginning in 2010 the COMET® Program (www.comet.ucar.edu), a part of the UCAR Community Programs (UCP) at UCAR, entered into partnership with several Climate Change and Water Working Group (CCAWWG, http://www.ccawwg.us/) agencies to pilot a new training program. With funding coming from the Bureau of Reclamation and the US Army Corps of Engineers, a series of self-paced online lessons and live courses targeted at technical climate change and water science professionals have already been delivered. Since it's release in 2012, the first self-paced lesson developed under this partnership entitled, "Preparing Hydro-climate Inputs for Climate Change in Water Resource Planning", has been taken over 2600 times. Users have come from federal, state, and local agencies as well as academia, government and private sectors around the US as well as from other countries. Additionally, the most popular multi-day course, Hydrologic Impacts Under Climate Change (HIUCC), has been offered to a diverse audience in both residence and virtual formats. This presentation provides an overview of the training materials developed through this partnership as well as plans for future offerings. A recommended set of lessons for all users who wish explore the open materials will be highlighted, including excerpts from the newest materials covering climate change influences on water temperature for inland streams and watershed and channel sedimentation. These self-paced, online materials are currently freely available on the of the MetEd Web site (http://www.meted.ucar.edu) via the "Education & Training", "Climate" topic area. Users interested in directly accessing the materials can take these and many other lessons at http://meted.ucar.edu/climate. Additionally, the presentation highlights opportunities for learners to register for ongoing multi-day courses taught both live in person and at a distance. Now, in the beginning of the 6th year of partnership, new initiatives to train non-technical staff in many areas of climate science and water change management as well as training technical staff in topics related to coastal vulnerabilities and sea level change are underway. New self-paced training and live instructor courses will be developed to support these efforts and details will be provided in the presentation.

Putting vulnerability to climate change on the map: a review of approaches, benefits, and risks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Preston, Benjamin L

2011-01-01

There is growing demand among stakeholders across public and private institutions for spatially-explicit information regarding vulnerability to climate change at the local scale. However, the challenges associated with mapping the geography of climate change vulnerability are non-trivial, both conceptually and technically, suggesting the need for more critical evaluation of this practice. Here, we review climate change vulnerability mapping in the context of four key questions that are fundamental to assessment design. First, what are the goals of the assessment? A review of published assessments yields a range of objective statements that emphasize problem orientation or decision-making about adaptation actions. Second,more » how is the assessment of vulnerability framed? Assessments vary with respect to what values are assessed (vulnerability of what) and the underlying determinants of vulnerability that are considered (vulnerability to what). The selected frame ultimately influences perceptions of the primary driving forces of vulnerability as well as preferences regarding management alternatives. Third, what are the technical methods by which an assessment is conducted? The integration of vulnerability determinants into a common map remains an emergent and subjective practice associated with a number of methodological challenges. Fourth, who participates in the assessment and how will it be used to facilitate change? Assessments are often conducted under the auspices of benefiting stakeholders, yet many lack direct engagement with stakeholders. Each of these questions is reviewed in turn by drawing on an illustrative set of 45 vulnerability mapping studies appearing in the literature. A number of pathways for placing vulnerability« less

Laboratory Directed Research and Development Program FY98

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, T.; Chartock, M.

1999-02-05

The Ernest Orlando Lawrence Berkeley National Laboratory (LBNL or Berkeley Lab) Laboratory Directed Research and Development Program FY 1998 report is compiled from annual reports submitted by principal investigators following the close of the fiscal year. This report describes the supported projects and summarizes their accomplishments. It constitutes a part of the Laboratory Directed Research and Development (LDRD) program planning and documentation process that includes an annual planning cycle, projection selection, implementation, and review. The LBNL LDRD program is a critical tool for directing the Laboratory's forefront scientific research capabilities toward vital, excellent, and emerging scientific challenges. The program providesmore » the resources for LBNL scientists to make rapid and significant contributions to critical national science and technology problems. The LDRD program also advances LBNL's core competencies, foundations, and scientific capability, and permits exploration of exciting new opportunities. All projects are work in forefront areas of science and technology. Areas eligible for support include the following: Advanced study of hypotheses, concepts, or innovative approaches to scientific or technical problems; Experiments and analyses directed toward ''proof of principle'' or early determination of the utility of new scientific ideas, technical concepts, or devices; and Conception and preliminary technical analyses of experimental facilities or devices.« less

Advancements in the use of speleothems as climate archives

NASA Astrophysics Data System (ADS)

Wong, Corinne I.; Breecker, Daniel O.

2015-11-01

Speleothems have become a cornerstone of the approach to better understanding Earth's climatic teleconnections due to their precise absolute chronologies, their continuous or semicontinuous deposition and their global terrestrial distribution. We review the last decade of speleothem-related research, building off a similar review by McDermott (2004), in three themes - i) investigation of global teleconnections using speleothem-based climate reconstructions, ii) refinement of climate interpretations from speleothem proxies through cave monitoring, and iii) novel, technical methods of speleothem-based climate reconstructions. Speleothem records have enabled critical insight into the response of global hydroclimate to large climate changes. This includes the relevant forcings and sequence of climatic responses involved in glacial terminations and recognition of a global monsoon response to climate changes on orbital and millennial time scales. We review advancements in understanding of the processes that control speleothem δ13C values and introduce the idea of a direct atmospheric pCO2 influence. We discuss progress in understanding kinetic isotope fractionation, which, with further advances, may help quantify paleoclimate changes despite non-equilibrium formation of speleothems. This feeds into the potential of proxy system modeling to consider climatic, hydrological and biogeochemical processes with the objective of quantitatively interpreting speleothem proxies. Finally, we provide an overview of emerging speleothem proxies and novel approaches using existing proxies. Most recently, technical advancements made in the measurement of fluid inclusions are now yielding reliable determinations of paleotemperatures.

Hamline/3M Project: Liaison for Curricular Change

NASA Astrophysics Data System (ADS)

Rundquist, Andy

2002-03-01

This project was designed to catalyze curricular changes to better prepare students for the workplace. Industrial managers provided a list of 16 characteristics valued in the workplace: most were NOT related to science course content. The project formed 5 teams each including 3M professionals and students. Each team developed curricular changes in one of the 16 areas. Team goals were to improve skills in communication, data analysis, business/economics, team problem solving, and culture competency. Curricular changes realized include communication skill activities embodied in science courses and faculty communication teaching skill seminars, self learning tools in data analysis, statistics and model building, a new course developed with assistance from 3M personnel focussing on topics directly related to technological industries, high performance team problem solving training/coaching for faculty and workshops for students and faculty relative to importance of cultural competencies in the workplace, and a new course focusing on culture, team problem solving and conflict resolution in the technical workplace. Process for developing and content of curricular changes will be reported.

Climate change, vector-borne diseases and working population.

PubMed

Vonesch, Nicoletta; D'Ovidio, Maria Concetta; Melis, Paola; Remoli, Maria Elena; Ciufolini, Maria Grazia; Tomao, Paola

2016-01-01

Risks associated with climate change are increasing worldwide and the global effects include altered weather and precipitation patterns, rising temperatures and others; human health can be affected directly and indirectly. This paper is an overview of literature regarding climate changes, their interaction with vector-borne diseases and impact on working population. Articles regarding climate changes as drivers of vector-borne diseases and evidences of occupational cases have been picked up by public databank. Technical documents were also included in the study. Evidences regarding the impact of climate changes on vector-borne diseases in Europe, provided by the analysis of the literature, are presented. Climate-sensitive vector-borne diseases are likely to be emerging due to climate modifications, with impacts on public and occupational health. However, other environmental and anthropogenic drivers such as increasing travelling and trade, deforestation and reforestation, altered land use and urbanization can influence their spread. Further studies are necessary to better understand the phenomenon and implementation of adaptation strategies to protect human health should be accelerated and strengthened.

A Meta-Analysis of Motivational Interviewing Process: Technical, Relational, and Conditional Process Models of Change

PubMed Central

Magill, Molly; Apodaca, Timothy R.; Borsari, Brian; Gaume, Jacques; Hoadley, Ariel; Gordon, Rebecca E.F.; Tonigan, J. Scott; Moyers, Theresa

2018-01-01

Objective In the present meta-analysis, we test the technical and relational hypotheses of Motivational Interviewing (MI) efficacy. We also propose an a priori conditional process model where heterogeneity of technical path effect sizes should be explained by interpersonal/relational (i.e., empathy, MI Spirit) and intrapersonal (i.e., client treatment seeking status) moderators. Method A systematic review identified k = 58 reports, describing 36 primary studies and 40 effect sizes (N = 3025 participants). Statistical methods calculated the inverse variance-weighted pooled correlation coefficient for the therapist to client and the client to outcome paths across multiple target behaviors (i.e., alcohol use, other drug use, other behavior change). Results Therapist MI-consistent skills were correlated with more client change talk (r = .55, p < .001) as well as more sustain talk (r = .40, p < .001). MI-inconsistent skills were correlated with more sustain talk (r = .16, p < .001), but not change talk. When these indicators were combined into proportions, as recommended in the Motivational Interviewing Skill Code, the overall technical hypothesis was supported. Specifically, proportion MI consistency was related to higher proportion change talk (r = .11, p = .004) and higher proportion change talk was related to reductions in risk behavior at follow up (r = −.16, p < .001). When tested as two independent effects, client change talk was not significant, but sustain talk was positively associated with worse outcome (r = .19, p < .001). Finally, the relational hypothesis was not supported, but heterogeneity in technical hypothesis path effect sizes was partially explained by inter- and intra-personal moderators. Conclusions This meta-analysis provides additional support for the technical hypothesis of MI efficacy; future research on the relational hypothesis should occur in the field rather than in the context of clinical trials. PMID:29265832

A meta-analysis of motivational interviewing process: Technical, relational, and conditional process models of change.

PubMed

Magill, Molly; Apodaca, Timothy R; Borsari, Brian; Gaume, Jacques; Hoadley, Ariel; Gordon, Rebecca E F; Tonigan, J Scott; Moyers, Theresa

2018-02-01

In the present meta-analysis, we test the technical and relational hypotheses of Motivational Interviewing (MI) efficacy. We also propose an a priori conditional process model where heterogeneity of technical path effect sizes should be explained by interpersonal/relational (i.e., empathy, MI Spirit) and intrapersonal (i.e., client treatment seeking status) moderators. A systematic review identified k = 58 reports, describing 36 primary studies and 40 effect sizes (N = 3,025 participants). Statistical methods calculated the inverse variance-weighted pooled correlation coefficient for the therapist to client and the client to outcome paths across multiple target behaviors (i.e., alcohol use, other drug use, other behavior change). Therapist MI-consistent skills were correlated with more client change talk (r = .55, p < .001) as well as more sustain talk (r = .40, p < .001). MI-inconsistent skills were correlated with more sustain talk (r = .16, p < .001), but not change talk. When these indicators were combined into proportions, as recommended in the Motivational Interviewing Skill Code, the overall technical hypothesis was supported. Specifically, proportion MI consistency was related to higher proportion change talk (r = .11, p = .004) and higher proportion change talk was related to reductions in risk behavior at follow up (r = -.16, p < .001). When tested as two independent effects, client change talk was not significant, but sustain talk was positively associated with worse outcome (r = .19, p < .001). Finally, the relational hypothesis was not supported, but heterogeneity in technical hypothesis path effect sizes was partially explained by inter- and intrapersonal moderators. This meta-analysis provides additional support for the technical hypothesis of MI efficacy; future research on the relational hypothesis should occur in the field rather than in the context of clinical trials. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Technical and Further Education (TAFE) Head Teachers: Their Changing Role

ERIC Educational Resources Information Center

Rice, Ann

2005-01-01

Change in Technical and Further Education (TAFE) in Australia is being driven by government initiatives that must be operationalised at the college level. Head teachers are the frontline managers in these colleges, who have to ensure their sections are responsive to the changes while also meeting the educational requirements of their traditional…

Technical efficiency and productivity of Chinese county hospitals: an exploratory study in Henan province, China.

PubMed

Cheng, Zhaohui; Tao, Hongbing; Cai, Miao; Lin, Haifeng; Lin, Xiaojun; Shu, Qin; Zhang, Ru-Ning

2015-09-09

Chinese county hospitals have been excessively enlarging their scale during the healthcare reform since 2009. The purpose of this paper is to examine the technical efficiency and productivity of county hospitals during the reform process, and to determine whether, and how, efficiency is affected by various factors. 114 sample county hospitals were selected from Henan province, China, from 2010 to 2012. Data envelopment analysis was employed to estimate the technical and scale efficiency of sample hospitals. The Malmquist index was used to calculate productivity changes over time. Tobit regression was used to regress against 4 environmental factors and 5 institutional factors that affected the technical efficiency. (1) 112 (98.2%), 112 (98.2%) and 104 (91.2%) of the 114 sample hospitals ran inefficiently in 2010, 2011 and 2012, with average technical efficiency of 0.697, 0.748 and 0.790, respectively. (2) On average, during 2010-2012, productivity of sample county hospitals increased by 7.8%, which was produced by the progress in technical efficiency changes and technological changes of 0.9% and 6.8%, respectively. (3) Tobit regression analysis indicated that government subsidy, hospital size with above 618 beds and average length of stay assumed a negative sign with technical efficiency; bed occupancy rate, ratio of beds to nurses and ratio of nurses to physicians assumed a positive sign with technical efficiency. There was considerable space for technical efficiency improvement in Henan county hospitals. During 2010-2012, sample hospitals experienced productivity progress; however, the adverse change in pure technical efficiency should be emphasised. Moreover, according to the Tobit results, policy interventions that strictly supervise hospital bed scale, shorten the average length of stay and coordinate the proportion among physicians, nurses and beds, would benefit hospital efficiency. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Technical efficiency and productivity of Chinese county hospitals: an exploratory study in Henan province, China

PubMed Central

Cheng, Zhaohui; Tao, Hongbing; Cai, Miao; Lin, Haifeng; Lin, Xiaojun; Shu, Qin; Zhang, Ru-ning

2015-01-01

Objectives Chinese county hospitals have been excessively enlarging their scale during the healthcare reform since 2009. The purpose of this paper is to examine the technical efficiency and productivity of county hospitals during the reform process, and to determine whether, and how, efficiency is affected by various factors. Setting and participants 114 sample county hospitals were selected from Henan province, China, from 2010 to 2012. Outcome measures Data envelopment analysis was employed to estimate the technical and scale efficiency of sample hospitals. The Malmquist index was used to calculate productivity changes over time. Tobit regression was used to regress against 4 environmental factors and 5 institutional factors that affected the technical efficiency. Results (1) 112 (98.2%), 112 (98.2%) and 104 (91.2%) of the 114 sample hospitals ran inefficiently in 2010, 2011 and 2012, with average technical efficiency of 0.697, 0.748 and 0.790, respectively. (2) On average, during 2010–2012, productivity of sample county hospitals increased by 7.8%, which was produced by the progress in technical efficiency changes and technological changes of 0.9% and 6.8%, respectively. (3) Tobit regression analysis indicated that government subsidy, hospital size with above 618 beds and average length of stay assumed a negative sign with technical efficiency; bed occupancy rate, ratio of beds to nurses and ratio of nurses to physicians assumed a positive sign with technical efficiency. Conclusions There was considerable space for technical efficiency improvement in Henan county hospitals. During 2010–2012, sample hospitals experienced productivity progress; however, the adverse change in pure technical efficiency should be emphasised. Moreover, according to the Tobit results, policy interventions that strictly supervise hospital bed scale, shorten the average length of stay and coordinate the proportion among physicians, nurses and beds, would benefit hospital efficiency. PMID:26353864

Communication Sciences and Health Sciences.

ERIC Educational Resources Information Center

Lane, Shelley D.

1981-01-01

Technical skills and interpersonal communication contribute to diagnosing diseases, and evidence suggests that the quality of the interpersonal relationship can significantly influence the outcome of treatments that appear to depend solely on technical factors. Because communication directly influences health-related outcomes, communication…

76 FR 27274 - Defense Federal Acquisition Regulation Supplement; Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-11

... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System 48 CFR Part 225 Defense Federal Acquisition Regulation Supplement; Technical Amendments AGENCY: Defense Acquisition Regulations System... Federal Acquisition Regulation Supplement (DFARS) to direct contracting officers to additional guidance on...

77 FR 34874 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-12

...., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416...., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416...

78 FR 49240 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-13

... Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada... Bombardier, Inc., Q Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada...

78 FR 75291 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-11

... Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada... Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone 416-375-4000; fax...

77 FR 66413 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-05

... Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5, Canada..., contact Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, Toronto, Ontario M3K 1Y5...

A Report to the U.S. Department of Education on Educational Challenges and Technical Assistance Needs for the Northeast Region

ERIC Educational Resources Information Center

CNA Corporation, 2005

2005-01-01

The Northeast Regional Advisory Committee (NE RAC) provides an assessment of the technical assistance needs of educators in the Northeast Region in response to a directive from the Secretary of the U.S. Department of Education (ED). The Secretary will use this assessment in establishing 20 comprehensive centers to provide technical assistance to…

National climate assessment technical report on the impacts of climate and land use and land cover change

Treesearch

Thomas Loveland; Rezaul Mahmood; Toral Patel-Weynand; Krista Karstensen; Kari Beckendorf; Norman Bliss; Andrew Carleton

2012-01-01

This technical report responds to the recognition by the U.S. Global Change Research Program (USGCRP) and the National Climate Assessment (NCA) of the importance of understanding how land use and land cover (LULC) affects weather and climate variability and change and how that variability and change affects LULC. Current published, peer-reviewed, scientific literature...

High Definition Transcranial Direct Current Stimulation Induces Both Acute and Persistent Changes in Broadband Cortical Synchronization: a Simultaneous tDCS-EEG Study

PubMed Central

Roy, Abhrajeet; Baxter, Bryan

2014-01-01

The goal of this study was to develop methods for simultaneously acquiring electrophysiological data during high definition transcranial direct current stimulation (tDCS) using high resolution electroencephalography (EEG). Previous studies have pointed to the after effects of tDCS on both motor and cognitive performance, and there appears to be potential for using tDCS in a variety of clinical applications. However, little is known about the real-time effects of tDCS on rhythmic cortical activity in humans due to the technical challenges of simultaneously obtaining electrophysiological data during ongoing stimulation. Furthermore, the mechanisms of action of tDCS in humans are not well understood. We have conducted a simultaneous tDCS-EEG study in a group of healthy human subjects. Significant acute and persistent changes in spontaneous neural activity and event related synchronization (ERS) were observed during and after the application of high definition tDCS over the left sensorimotor cortex. Both anodal and cathodal stimulation resulted in acute global changes in broadband cortical activity which were significantly different than the changes observed in response to sham stimulation. For the group of 8 subjects studied, broadband individual changes in spontaneous activity during stimulation were apparent both locally and globally. In addition, we found that high definition tDCS of the left sensorimotor cortex can induce significant ipsilateral and contralateral changes in event related desynchronization (ERD) and ERS during motor imagination following the end of the stimulation period. Overall, our results demonstrate the feasibility of acquiring high resolution EEG during high definition tDCS and provide evidence that tDCS in humans directly modulates rhythmic cortical synchronization during and after its administration. PMID:24956615

Describing Directional Cell Migration with a Characteristic Directionality Time

PubMed Central

Loosley, Alex J.; O’Brien, Xian M.; Reichner, Jonathan S.; Tang, Jay X.

2015-01-01

Many cell types can bias their direction of locomotion by coupling to external cues. Characteristics such as how fast a cell migrates and the directedness of its migration path can be quantified to provide metrics that determine which biochemical and biomechanical factors affect directional cell migration, and by how much. To be useful, these metrics must be reproducible from one experimental setting to another. However, most are not reproducible because their numerical values depend on technical parameters like sampling interval and measurement error. To address the need for a reproducible metric, we analytically derive a metric called directionality time, the minimum observation time required to identify motion as directionally biased. We show that the corresponding fit function is applicable to a variety of ergodic, directionally biased motions. A motion is ergodic when the underlying dynamical properties such as speed or directional bias do not change over time. Measuring the directionality of nonergodic motion is less straightforward but we also show how this class of motion can be analyzed. Simulations are used to show the robustness of directionality time measurements and its decoupling from measurement errors. As a practical example, we demonstrate the measurement of directionality time, step-by-step, on noisy, nonergodic trajectories of chemotactic neutrophils. Because of its inherent generality, directionality time ought to be useful for characterizing a broad range of motions including intracellular transport, cell motility, and animal migration. PMID:25992908

44 CFR 65.3 - Requirement to submit new technical data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... available, a community shall notify the Administrator of the changes by submitting technical or scientific... IDENTIFICATION AND MAPPING OF SPECIAL HAZARD AREAS § 65.3 Requirement to submit new technical data. A community's...

Exploring Strengths of Career Technical Education Deans: Implementing Change within Community Colleges

ERIC Educational Resources Information Center

Davis, Maria

2013-01-01

The purpose of this qualitative study was to explore how career technical education (CTE) deans implement crucial changes in their programs to keep up with industry standards required by external agencies, the Perkins grant, and the advancements of technology. Deans must make top-down, lateral, as well as vertical change to implement improvements…

76 FR 78062 - Self-Regulatory Organizations; NYSE Amex LLC; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-15

... problem and make other technical changes. The proposed change will be operative on December 1, 2011. The... experiences a bona fide systems problem and make other technical changes. The Exchange presently has three... Exchange experienced a bona fide systems problem. The Exchange proposes to amend the Fee Schedule to extend...

Rocky Flats Plant: Test bed for transitioning from weapons production mission to environmental restoration, waste management, and economic development missions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benjamin, A.; Murthy, K.S.; Krenzer, R.W.

1993-01-07

Redirection of Rocky Flats Plant's (RF) mission is an inevitable result of changes in the worldwide social, political, and environmental factors. These changes were exemplified in the cancellation of the W-88 Warhead in January 1992, by the President of the United States. These unprecedented changes have altered the RF's traditional nuclear weapons production mission to the transition mission, i.e., cleanup, preparation for deactivation and decontamination, decommissioning, dismantlement and demolition, and when appropriate, economic development, of the facilities. The purpose of this paper is to describe the essentials of the technical approach and management actions advanced by EG G Rocky Flats,more » Inc., to organize, staff, direct, and control the activities necessary to transition the RF from its historical weapons production mission to the transition mission.« less

Rocky Flats Plant: Test bed for transitioning from weapons production mission to environmental restoration, waste management, and economic development missions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benjamin, A.; Murthy, K.S.; Krenzer, R.W.

1993-01-07

Redirection of Rocky Flats Plant`s (RF) mission is an inevitable result of changes in the worldwide social, political, and environmental factors. These changes were exemplified in the cancellation of the W-88 Warhead in January 1992, by the President of the United States. These unprecedented changes have altered the RF`s traditional nuclear weapons production mission to the transition mission, i.e., cleanup, preparation for deactivation and decontamination, decommissioning, dismantlement and demolition, and when appropriate, economic development, of the facilities. The purpose of this paper is to describe the essentials of the technical approach and management actions advanced by EG&G Rocky Flats, Inc.,more » to organize, staff, direct, and control the activities necessary to transition the RF from its historical weapons production mission to the transition mission.« less

1995 Laboratory-Directed Research and Development Annual report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cauffman, D.P.; Shoaf, D.L.; Hill, D.A.

1995-12-31

The Laboratory-Directed Research and Development Program (LDRD) is a key component of the discretionary research conducted by Lockheed Idaho Technologies Company (Lockheed Idaho) at the Idaho National Engineering Laboratory (INEL). The threefold purpose and goal of the LDRD program is to maintain the scientific and technical vitality of the INEL, respond to and support new technical opportunities, and enhance the agility and flexibility of the national laboratory and Lockheed Idaho to address the current and future missions of the Department of Energy.

Small Business Participation in Air Force Procurement: Participation Trends and the Effect of Acquisition Reform Initiatives on Air Force Procurement via Selected Contract Types in Selected Product Categories

DTIC Science & Technology

2004-06-01

directed the SBA to provide several types of assistance to small businesses , including technical and management assistance, loans, and assistance in...Directed the SBA to provide small businesses with technical and management assistance - Authorized the SBA to enter into contracts with Federal...command and center directors of small business , small business specialists, data managers , and Air Force Institute of Technology student researchers

1983-84 Evaluation Report of Vocational and Technical Education in South Carolina.

ERIC Educational Resources Information Center

South Carolina State Advisory Council on Vocational and Technical Education, Columbia.

This evaluation report contains a series of articles on vocational and technical education encompassing the 1983-84 school year. The articles, collectively, are intended to give an overall picture of vocational and technical education programs in South Carolina. The lead article on technical education strongly urges several changes to bring about…

Managing change: an overview.

PubMed

Lorenzi, N M; Riley, R T

2000-01-01

As increasingly powerful informatics systems are designed, developed, and implemented, they inevitably affect larger, more heterogeneous groups of people and more organizational areas. In turn, the major challenges to system success are often more behavioral than technical. Successfully introducing such systems into complex health care organizations requires an effective blend of good technical and good organizational skills. People who have low psychological ownership in a system and who vigorously resist its implementation can bring a "technically best" system to its knees. However, effective leadership can sharply reduce the behavioral resistance to change-including to new technologies-to achieve a more rapid and productive introduction of informatics technology. This paper looks at four major areas-why information system failures occur, the core theories supporting change management, the practical applications of change management, and the change management efforts in informatics.

Separate collection of plastic waste, better than technical sorting from municipal solid waste?

PubMed

Feil, Alexander; Pretz, Thomas; Jansen, Michael; Thoden van Velzen, Eggo U

2017-02-01

The politically preferred solution to fulfil legal recycling demands is often implementing separate collection systems. However, experience shows their limitations, particularly in urban centres with a high population density. In response to the European Union landfill directive, mechanical biological waste treatment plants have been installed all over Europe. This technology makes it possible to retrieve plastic waste from municipal solid waste. Operators of mechanical biological waste treatment plants, both in Germany and the Netherlands, have started to change their mechanical separation processes to additionally produce plastic pre-concentrates. Results from mechanical biological waste treatment and separate collection of post-consumer packaging waste will be presented and compared. They prove that both the yield and the quality of plastic waste provided as feedstock for the production of secondary plastic raw material are largely comparable. An economic assessment shows which conditions for a technical sorting plant are economically attractive in comparison to separate collection systems. It is, however, unlikely that plastic recycling will ever reach cost neutrality.

A study on operation efficiency evaluation based on firm's financial index and benchmark selection: take China Unicom as an example

NASA Astrophysics Data System (ADS)

Wu, Zu-guang; Tian, Zhan-jun; Liu, Hui; Huang, Rui; Zhu, Guo-hua

2009-07-01

Being the only listed telecom operators of A share market, China Unicom has always been attracted many institutional investors under the concept of 3G recent years,which itself is a great technical progress expectation.Do the institutional investors or the concept of technical progress have signficant effect on the improving of firm's operating efficiency?Though reviewing the documentary about operating efficiency we find that schoolars study this problem useing the regress analyzing based on traditional production function and data envelopment analysis(DEA) and financial index anayzing and marginal function and capital labor ratio coefficient etc. All the methods mainly based on macrodata. This paper we use the micro-data of company to evaluate the operating efficiency.Using factor analyzing based on financial index and comparing the factor score of three years from 2005 to 2007, we find that China Unicom's operating efficiency is under the averge level of benchmark corporates and has't improved under the concept of 3G from 2005 to 2007.In other words,institutional investor or the conception of technical progress expectation have faint effect on the changes of China Unicom's operating efficiency. Selecting benchmark corporates as post to evaluate the operating efficiency is a characteristic of this method ,which is basicallly sipmly and direct.This method is suit for the operation efficiency evaluation of agriculture listed companies because agriculture listed also face technical progress and marketing concept such as tax-free etc.

Barriers to Electronic Health Record Adoption: a Systematic Literature Review.

PubMed

Kruse, Clemens Scott; Kristof, Caitlin; Jones, Beau; Mitchell, Erica; Martinez, Angelica

2016-12-01

Federal efforts and local initiatives to increase adoption and use of electronic health records (EHRs) continue, particularly since the enactment of the Health Information Technology for Economic and Clinical Health (HITECH) Act. Roughly one in four hospitals not adopted even a basic EHR system. A review of the barriers may help in understanding the factors deterring certain healthcare organizations from implementation. We wanted to assemble an updated and comprehensive list of adoption barriers of EHR systems in the United States. Authors searched CINAHL, MEDLINE, and Google Scholar, and accepted only articles relevant to our primary objective. Reviewers independently assessed the works highlighted by our search and selected several for review. Through multiple consensus meetings, authors tapered articles to a final selection most germane to the topic (n = 27). Each article was thoroughly examined by multiple authors in order to achieve greater validity. Authors identified 39 barriers to EHR adoption within the literature selected for the review. These barriers appeared 125 times in the literature; the most frequently mentioned barriers were regarding cost, technical concerns, technical support, and resistance to change. Despite federal and local incentives, the initial cost of adopting an EHR is a common existing barrier. The other most commonly mentioned barriers include technical support, technical concerns, and maintenance/ongoing costs. Policy makers should consider incentives that continue to reduce implementation cost, possibly aimed more directly at organizations that are known to have lower adoption rates, such as small hospitals in rural areas.

Electronic document distribution: Design of the anonymous FTP Langley Technical Report Server

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Gottlich, Gretchen L.

1994-01-01

An experimental electronic dissemination project, the Langley Technical Report Server (LTRS), has been undertaken to determine the feasibility of delivering Langley technical reports directly to the desktops of researchers worldwide. During the first six months, over 4700 accesses occurred and over 2400 technical reports were distributed. This usage indicates the high level of interest that researchers have in performing literature searches and retrieving technical reports at their desktops. The initial system was developed with existing resources and technology. The reports are stored as files on an inexpensive UNIX workstation and are accessible over the Internet. This project will serve as a foundation for ongoing projects at other NASA centers that will allow for greater access to NASA technical reports.

New Direction of NASA Exploration Life Support

NASA Technical Reports Server (NTRS)

Chambliss, Joe; Lawson, B. Michael; Barta, Daniel J.

2006-01-01

NASA's activities in life support Research and Technology Development (R&TD) have changed in both focus and scope following implementation of recommendations from the Exploration System Architecture Study (ESAS). The limited resources available and the compressed schedule to conduct life support R&TD have required that future efforts address the needs of the Crew Exploration Vehicle (CEV), the Lunar Surface Access Module (LSAM) and Lunar Outpost (LO). Advanced Life Support (ALS) efforts related to long duration planetary bases have been deferred or canceled. This paper describes the scope of the new Exploration Life Support (ELS) project; how it differs from ALS, and how it supports critical needs for the CEV, LSAM and LO. In addition, this paper provides rationale for changes in the scope and focus of technical content within ongoing life support R&TD activities.

Promoting Creative Thinking Ability Using Contextual Learning Model in Technical Drawing Achievement

NASA Astrophysics Data System (ADS)

Mursid, R.

2018-02-01

The purpose of this study is to determine whether there is influence; the differences in the results between students that learn drawing techniques taught by the Contextual Innovative Model (CIM) and taught by Direct Instructional Model (DIM), the differences in achievement among students of technical drawing that have High Creative Thinking Ability (HCTA) with Low Creative Thinking Ability (LCTA), and the interaction between the learning model with the ability to think creatively to the achievement technical drawing. Quasi-experimental research method. Results of research appoint that: the achievement of students that learned technical drawing by using CIM is higher than the students that learned technical drawing by using DIM, the achievement of students of technical drawings HCTA is higher than the achievement of students who have technical drawing LCTA, and there are interactions between the use of learning models and creative thinking abilities in influencing student achievement technical drawing.

47 CFR 101.115 - Directional antennas.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Directional antennas. 101.115 Section 101.115... SERVICES Technical Standards § 101.115 Directional antennas. (a) Unless otherwise authorized upon specific... antenna adjusted with the center of the major lobe of radiation in the horizontal plane directed toward...

47 CFR 101.115 - Directional antennas.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Directional antennas. 101.115 Section 101.115... SERVICES Technical Standards § 101.115 Directional antennas. (a) Unless otherwise authorized upon specific... antenna adjusted with the center of the major lobe of radiation in the horizontal plane directed toward...

47 CFR 101.115 - Directional antennas.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Directional antennas. 101.115 Section 101.115... SERVICES Technical Standards § 101.115 Directional antennas. (a) Unless otherwise authorized upon specific... antenna adjusted with the center of the major lobe of radiation in the horizontal plane directed toward...

Direct Visualization of Shock Waves in Supersonic Space Shuttle Flight

NASA Technical Reports Server (NTRS)

OFarrell, J. M.; Rieckhoff, T. J.

2011-01-01

Direct observation of shock boundaries is rare. This Technical Memorandum describes direct observation of shock waves produced by the space shuttle vehicle during STS-114 and STS-110 in imagery provided by NASA s tracking cameras.

42 CFR 80.42 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... training means all technical training courses conducted directly by NIOSH for personnel of State and local... Health. (d) Registration Office means the Direct Training Registration Office, NIOSH, 1014 Broadway...

Development and reliability of the explicit professional oral communication observation tool to quantify the use of non-technical skills in healthcare.

PubMed

Kemper, Peter F; van Noord, Inge; de Bruijne, Martine; Knol, Dirk L; Wagner, Cordula; van Dyck, Cathy

2013-07-01

A lack of non-technical skills is increasingly recognised as an important underlying cause of adverse events in healthcare. The nature and number of things professionals communicate to each other can be perceived as a product of their use of non-technical skills. This paper describes the development and reliability of an instrument to measure and quantify the use of non-technical skills by direct observations of explicit professional oral communication (EPOC) in the clinical situation. In an iterative process we translated, tested and refined an existing checklist from the aviation industry, called self, human interaction, aircraft, procedures and environment, in the context of healthcare, notably emergency departments (ED) and intensive care units (ICU). The EPOC comprises six dimensions: assertiveness, working with others; task-oriented leadership; people-oriented leadership; situational awareness; planning and anticipation. Each dimension is specified into several concrete items reflecting verbal behaviours. The EPOC was evaluated in four ED and six ICU. In the ED and ICU, respectively, 378 and 1144 individual and 51 and 68 contemporaneous observations of individual staff members were conducted. All EPOC dimensions occur frequently, apart from assertiveness, which was hardly observed. Intraclass correlations for the overall EPOC score ranged between 0.85 and 0.91 and for underlying EPOC dimensions between 0.53 and 0.95. The EPOC is a new instrument for evaluating the use of non-technical skills in healthcare, which is reliable in two highly different settings. By quantifying professional behaviour the instrument facilitates measurement of behavioural change over time. The results suggest that EPOC can also be translated to other settings.

Development and reliability of the explicit professional oral communication observation tool to quantify the use of non-technical skills in healthcare

PubMed Central

Kemper, Peter F; van Noord, Inge; de Bruijne, Martine; Knol, Dirk L; Wagner, Cordula; van Dyck, Cathy

2013-01-01

Background A lack of non-technical skills is increasingly recognised as an important underlying cause of adverse events in healthcare. The nature and number of things professionals communicate to each other can be perceived as a product of their use of non-technical skills. This paper describes the development and reliability of an instrument to measure and quantify the use of non-technical skills by direct observations of explicit professional oral communication (EPOC) in the clinical situation. Methods In an iterative process we translated, tested and refined an existing checklist from the aviation industry, called self, human interaction, aircraft, procedures and environment, in the context of healthcare, notably emergency departments (ED) and intensive care units (ICU). The EPOC comprises six dimensions: assertiveness, working with others; task-oriented leadership; people-oriented leadership; situational awareness; planning and anticipation. Each dimension is specified into several concrete items reflecting verbal behaviours. The EPOC was evaluated in four ED and six ICU. Results In the ED and ICU, respectively, 378 and 1144 individual and 51 and 68 contemporaneous observations of individual staff members were conducted. All EPOC dimensions occur frequently, apart from assertiveness, which was hardly observed. Intraclass correlations for the overall EPOC score ranged between 0.85 and 0.91 and for underlying EPOC dimensions between 0.53 and 0.95. Conclusions The EPOC is a new instrument for evaluating the use of non-technical skills in healthcare, which is reliable in two highly different settings. By quantifying professional behaviour the instrument facilitates measurement of behavioural change over time. The results suggest that EPOC can also be translated to other settings. PMID:23412933

Principles and Procedures in Technical Assistance: An Approach to Educational Change

ERIC Educational Resources Information Center

Lillie, David L.; Black, Talbot

1976-01-01

The Technical Assistance Development System (TADS) has developed through the years a system for technical assistance and has identified some important principles that should be followed in the operation of organizational support systems. (Author/ER)

Components Needed for the Design of a Sustainable Career and Technical Education Program

ERIC Educational Resources Information Center

Lassiter, Vann Mizzelle

2012-01-01

As education has changed to meet the needs of society and has been shaped by the enactment of new laws, various aspects included under the massive umbrella of education have also changed to maintain momentum One such educational program is career and technical education (CTE). Changes to CTE have been made to continually meet the needs of all…

Perception of Teaching and Assessing Technical Proficiency in American College of Veterinary Surgeons Small Animal Surgery Residency Programs.

PubMed

Kim, Stanley E; Case, J Brad; Lewis, Daniel D; Ellison, Gary W

2015-08-01

To determine how American College of Veterinary Surgeons (ACVS) small animal surgery residency programs are teaching and assessing technical skills, and ascertain the perceived value of those methods. Internet-based survey. Residents and Diplomate supervisors of ACVS small animal residency programs. Residents and supervisors were surveyed on their experience of surgery instruction, use of different resources for teaching, type and frequency of feedback, and perceived effectiveness of their programs in imparting technical proficiency. A total of 130 residents (62%) and 119 supervisors (44%) participated. Both residents and supervisors estimated the resident was the primary surgeon for a mean of 64% of cases, although this proportion varied widely between participants. The majority of residents and supervisors considered that direct intraoperative guidance was the most effective way for residents to develop technical skills. Verbal interactions between supervisor and resident occurred frequently and were highly valued. Regular wet laboratories and access to simulation models were uncommon. Despite over 90% of all participants reporting that a sufficient level of technical aptitude would be attained, only 58% of residents were satisfied with their technical skills training. Residents relied on direct interaction with supervisors to develop technical skills. The traditional mode of instruction for veterinary residents is the apprenticeship model, which is partly driven by ACVS requirements of supervisory support. Exposure to other teaching and assessment methods was variable. The current structure of residency programs is successful in imparting technical competency as perceived by supervisors and residents. However, consideration of a more formal method of residency training with structured assessment of technical skills as in human medicine should not be dismissed. © Copyright 2015 by The American College of Veterinary Surgeons.

Adaptive array antenna for satellite cellular and direct broadcast communications

NASA Technical Reports Server (NTRS)

Horton, Charles R.; Abend, Kenneth

1993-01-01

Adaptive phased-array antennas provide cost-effective implementation of large, light weight apertures with high directivity and precise beamshape control. Adaptive self-calibration allows for relaxation of all mechanical tolerances across the aperture and electrical component tolerances, providing high performance with a low-cost, lightweight array, even in the presence of large physical distortions. Beam-shape is programmable and adaptable to changes in technical and operational requirements. Adaptive digital beam-forming eliminates uplink contention by allowing a single electronically steerable antenna to service a large number of receivers with beams which adaptively focus on one source while eliminating interference from others. A large, adaptively calibrated and fully programmable aperture can also provide precise beam shape control for power-efficient direct broadcast from space. Advanced adaptive digital beamforming technologies are described for: (1) electronic compensation of aperture distortion, (2) multiple receiver adaptive space-time processing, and (3) downlink beam-shape control. Cost considerations for space-based array applications are also discussed.

Process spectroscopy in microemulsions—setup and multi-spectral approach for reaction monitoring of a homogeneous hydroformylation process

NASA Astrophysics Data System (ADS)

Meyer, K.; Ruiken, J.-P.; Illner, M.; Paul, A.; Müller, D.; Esche, E.; Wozny, G.; Maiwald, M.

2017-03-01

Reaction monitoring in disperse systems, such as emulsions, is of significant technical importance in various disciplines like biotechnological engineering, chemical industry, food science, and a growing number other technical fields. These systems pose several challenges when it comes to process analytics, such as heterogeneity of mixtures, changes in optical behavior, and low optical activity. Concerning this, online nuclear magnetic resonance (NMR) spectroscopy is a powerful technique for process monitoring in complex reaction mixtures due to its unique direct comparison abilities, while at the same time being non-invasive and independent of optical properties of the sample. In this study the applicability of online-spectroscopic methods on the homogeneously catalyzed hydroformylation system of 1-dodecene to tridecanal is investigated, which is operated in a mini-plant scale at Technische Universität Berlin. The design of a laboratory setup for process-like calibration experiments is presented, including a 500 MHz online NMR spectrometer, a benchtop NMR device with 43 MHz proton frequency as well as two Raman probes and a flow cell assembly for an ultraviolet and visible light (UV/VIS) spectrometer. Results of high-resolution online NMR spectroscopy are shown and technical as well as process-specific problems observed during the measurements are discussed.

7 CFR 3401.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Director who is responsible for the scientific and technical direction of the project. (d) Grantee means... Department to whom the authority to issue or modify research project grant instruments has been delegated. (j... experience in particular scientific or technical fields to give expert advice, in accordance with the...

7 CFR 3401.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Director who is responsible for the scientific and technical direction of the project. (d) Grantee means... Department to whom the authority to issue or modify research project grant instruments has been delegated. (j... experience in particular scientific or technical fields to give expert advice, in accordance with the...

7 CFR 3401.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Director who is responsible for the scientific and technical direction of the project. (d) Grantee means... Department to whom the authority to issue or modify research project grant instruments has been delegated. (j... experience in particular scientific or technical fields to give expert advice, in accordance with the...

HANDBOOK: GUIDE TO TECHNICAL RESOURCES FOR THE DESIGN OF LAND DISPOSAL FACILITIES

EPA Science Inventory

This Handbook facilitates the preparation and processing of land disposal permit applications. It directs the regulated community and the regulators to the appropriate EPA technical resource documents, as they prepare or review permits required under PL 480 (RCRA). Topics discuss...

78 FR 68357 - Airworthiness Directives; Aermacchi S.p.A. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-14

... with a Lycoming O-540 wide cylinder flange engine with a front crankcase mounted propeller governor... Societa Finmeccanica has issued Mandatory Bollettino Tecnico (English Translation: Technical Bulletin) No... Mandatory Bollettino Tecnico (English Translation: Technical Bulletin) No. 260SB-136, Revision 1, dated...

77 FR 18914 - National Motor Vehicle Title Information System (NMVTIS): Technical Corrections

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-29

... 1121-AA79 National Motor Vehicle Title Information System (NMVTIS): Technical Corrections AGENCY... (OJP) is promulgating this direct final rule for its National Motor Vehicle Title Information System... INFORMATION CONTACT paragraph. II. Background The National Motor Vehicle Title Information System was...

47 CFR 101.115 - Directional antennas.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Directional antennas. 101.115 Section 101.115... SERVICES Technical Standards § 101.115 Directional antennas. Link to an amendment published at 76 FR 59572... authorized under the rules of this part must employ a directional antenna adjusted with the center of the...

47 CFR 101.115 - Directional antennas.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Directional antennas. 101.115 Section 101.115... SERVICES Technical Standards § 101.115 Directional antennas. Link to an amendment published at 77 FR 54432... authorized under the rules of this part must employ a directional antenna adjusted with the center of the...

Customisation of an instrument to assess anaesthesiologists' non-technical skills.

PubMed

Jepsen, Rikke M H G; Spanager, Lene; Lyk-Jensen, Helle T; Dieckmann, Peter; Østergaard, Doris

2015-02-22

The objectives of the study were to identify Danish anaesthesiologists' non-technical skills and to customise the Scottish-developed Anaesthetists' Non-Technical Skills instrument for Danish anaesthesiologists. Six semi-structured group interviews were conducted with 31 operating room team members: anaes-thesiologists, nurse anaesthetists, surgeons, and scrub nurses. Interviews were transcribed verbatim and analysed using directed content analysis. Anaesthesiologists' non-technical skills were identified, coded, and sorted using the original instrument as a basis. The resulting prototype instrument was discussed with anaesthesiologists from 17 centres to ensure face validity. Interviews lasted 46-67 minutes. Identified examples of anaesthesiologists' good or poor non-technical skills fit the four categories in the original instrument: situation awareness; decision making; team working; and task management. Anaesthesiologists' leadership role in the operating room was emphasised: the original 'Task Management' category was named 'Leadership'. One new element, 'Demonstrating self-awareness' was added under the category 'Situation Awareness'. Compared with the original instrument, half of the behavioural markers were new, which reflected that being aware of and communicating one's own abilities to the team; working systematically; and speaking up to avoid adverse events were important skills. The Anaesthetists' Non-Technical Skills instrument was customised to a Danish setting using the identified non-technical skills for anaesthesiologists and the original instrument as basis. The customised instrument comprises four categories and 16 underpinning elements supported by multiple behavioural markers. Identifying non-technical skills through semi-structured group interviews and analysing them using direct content analysis proved a useful method for customising an assessment instrument to another setting.

Lean Participative Process Improvement: Outcomes and Obstacles in Trauma Orthopaedics

PubMed Central

New, Steve; Hadi, Mohammed; Pickering, Sharon; Robertson, Eleanor; Morgan, Lauren; Griffin, Damian; Collins, Gary; Rivero-Arias, Oliver; Catchpole, Ken; McCulloch, Peter

2016-01-01

Objectives To examine the effectiveness of a “systems” approach using Lean methodology to improve surgical care, as part of a programme of studies investigating possible synergy between improvement approaches. Setting A controlled before-after study using the orthopaedic trauma theatre of a UK Trust hospital as the active site and an elective orthopaedic theatre in the same Trust as control. Participants All staff involved in surgical procedures in both theatres. Interventions A one-day “lean” training course delivered by an experienced specialist team was followed by support and assistance in developing a 6 month improvement project. Clinical staff selected the subjects for improvement and designed the improvements. Outcome Measures We compared technical and non-technical team performance in theatre using WHO checklist compliance evaluation, “glitch count” and Oxford NOTECHS II in a sample of directly observed operations, and patient outcome (length of stay, complications and readmissions) for all patients. We collected observational data for 3 months and clinical data for 6 months before and after the intervention period. We compared changes in measures using 2-way analysis of variance. Results We studied 576 cases before and 465 after intervention, observing the operation in 38 and 41 cases respectively. We found no significant changes in team performance or patient outcome measures. The intervention theatre staff focused their efforts on improving first patient arrival time, which improved by 20 minutes after intervention. Conclusions This version of “lean” system improvement did not improve measured safety processes or outcomes. The study highlighted an important tension between promoting staff ownership and providing direction, which needs to be managed in “lean” projects. Space and time for staff to conduct improvement activities are important for success. PMID:27124012

77 FR 74579 - Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-17

... Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes AGENCY: Federal Aviation Administration... directive (AD) for certain Gulfstream Aerospace Corporation Model GIV-X airplanes. This AD requires... Aerospace Corporation, Technical Publications Dept., P.O. Box 2206, Savannah, GA 31402-2206; telephone 800...

Strategies to Increase After-School Program Staff Skills to Promote Healthy Eating and Physical Activity.

PubMed

Weaver, R Glenn; Beets, Michael W; Beighle, Aaron; Webster, Collin; Huberty, Jennifer; Moore, Justin B

2016-01-01

Standards targeting children's healthy eating and physical activity (HEPA) in after-school programs call for staff to display or refrain from HEPA-promoting or -discouraging behaviors that are linked to children's HEPA. This study evaluated strategies to align staff behaviors with HEPA Standards. Staff at four after-school programs serving approximately 500 children participated in professional development training from January 2012 to May 2013. Site leaders also attended workshops and received technical support during the same time frame. Changes in staff behaviors were evaluated using the System for Observing Staff Promotion of Activity and Nutrition in a pre- (fall 2011) multiple-post (spring 2012, fall 2012, and spring 2013), no-control group study design. A total of 8,949 scans were completed across the four measurement periods. Of the 19 behaviors measured, 14 changed in the appropriate direction. For example, staff engaging in physical activity with children increased from 27% to 40% of scans and staff eating unhealthy foods decreased from 56% to 14% of days. Ongoing training and technical assistance can have a measureable impact on staff behaviors linked to child-level HEPA outcomes. Future research should explore the feasibility of disseminating ongoing trainings to after-school program staff on a large scale. © 2015 Society for Public Health Education.

Small Potatoes No More.

ERIC Educational Resources Information Center

Ries, Eric

2000-01-01

Idaho has improved its historically poor career and technical education programs by changing priorities and increasing state support. A large grant from the J.A. and Kathryn Albertson Foundation is being used to develop professional-technical academies and to train career and technical teachers. (JOW)

48 CFR 1348.102 - Policies.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-submitted Value Engineering Change Proposals (VECPs) to the appropriate technical personnel for review. (b) Technical personnel shall conduct a comprehensive review of VECPs for technical feasibility, usefulness, and adequacy of the contractor's estimate of cost savings; make a written report; and recommend acceptance or...

75 FR 78607 - Changes in Flood Elevation Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-16

... communities where modification of the Base (1% annual-chance) Flood Elevations (BFEs) is appropriate because of new scientific or technical data. New flood insurance premium rates will be calculated from the... knowledge of changed conditions or new scientific or technical data. The modifications are made pursuant to...

What's in a Name?

ERIC Educational Resources Information Center

Hoyt, Kenneth B.

When the American Vocational Association changed its name to the Association for Career and Technical Education, it underscored the need for today's vocational educators to focus on both career education and technical education. The name change reflects the fact that today's work environment, labor market, and employment opportunities are very…

76 FR 23970 - Notice of Proposed Changes to Section IV of the Virginia State Technical Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service Notice of Proposed Changes to Section IV of the Virginia State Technical Guide AGENCY: Natural Resources Conservation Service (NRCS), U..., 395, Stream Habitat Improvement and Management, 422, Hedgerow Planting, 643, Restoration and...

What Philanthropy's Paradigm Shift Means for Higher Ed Fundraising

ERIC Educational Resources Information Center

McCully, George

2015-01-01

This is an unprecedented era of human history, in which simultaneous transformations of every technically advanced field are being driven by the powerful technological revolution in information and communications. Technically, these transformative changes are "paradigm shifts"--a distinct kind of historical change in which the governing…

Erosion Control and Recultivation Measures at a Headrace Channel of a Hydroelectric Power Plant using Different Combined Soil Bioengineering Techniques

NASA Astrophysics Data System (ADS)

Obriejetan, M.; Florineth, F.; Rauch, H. P.

2012-04-01

As a consequence of land use change resulting in an increased number of slope protection constructions and with respect to effects associated with climate change like extremes in temperatures and temperature variations or increased frequency of heavy precipitation, adaptation strategies for sustainable erosion protection systems are needed which meet ecological compatibility and economical requirements. Therefore a wide range of different technical solutions respectively geotextiles and geotextile-related products (blankets, nettings, grids etc.) are available on the market differing considerably in function, material, durability and pricing. Manufacturers usually provide product-specific information pertaining to application field, functional range or (technical) installation features whereas vegetational aspects are frequently neglected while vegetation can contribute substantially to increased near-surface erosion protection respectively slope stability. Though, the success of sustainable erosion control is directly dependent on several vegetational aspects. Adequate development of a functional vegetation layer in combination with geotextiles is closely associated to application aspects such as seeding technique, sowing date and intensity, seed-soil contact or maintenance measures as well as to qualitative aspects like seed quality, germination rates, area of origin, production method or certification. As a general guideline, erosion control within an initial phase is directly related to restoration techniques whereas vegetation specifics with regard to species richness or species composition play a key role in medium to long-term development and slope protection. In this context one of the fundamental objectives of our study is the identification and subsequently the determination of the main interaction processes between technical and biological components of combined slope protection systems. The influence of different geotextile characteristics on specific vegetation properties are studied by setting up comparative test plots at a field study site located at a headrace channel of a hydroelectric power plant. Different vegetational parameters such as basal coverage, species richness, species composition, abundance/dominance values by using a refined Braun-Blanquet cover estimation scale were collected as well as local environmental properties. Results during the first vegetation period show distinct effects of geotextiles especially on overall vegetation coverage and grasses-herbs-ratio. Geotextile supported plots show 20% higher overall coverage but lower amount of herbs after three months of vegetation growth compared to control plots without installation of auxiliary materials. Furthermore coir blankets reveal higher penetration resistance for seed leaves of herbal plants compared to coir nettings. Hence technical erosion protection products, biological components and it's combination have to be closely coordinated in order to achieve specified revegetation objectives and meet long-term functionality.